WorldWideScience

Sample records for method yielded values

  1. The Value Versus Volume Yield Problem for Live-Sawn Hardwood Sawlogs

    Science.gov (United States)

    Philip H. Steele; Francis G. Wagner; Lalit Kumar; Philip A. Araman

    1993-01-01

    The potential conflict between value and volume maximization in sawing hardwood sawlogs by the live sawing method was analyzed. Twenty-four digitally described red oak sawlogs were sawn at the log orientation of highest value yield. Five opening face sawlines were iteratively placed in the sawlog a 1/4-inch intervals and lumber grades, volumes, and values from...

  2. Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

    Science.gov (United States)

    Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

    2010-06-01

    This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

  3. A numerical integration-based yield estimation method for integrated circuits

    International Nuclear Information System (INIS)

    Liang Tao; Jia Xinzhang

    2011-01-01

    A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

  4. A numerical integration-based yield estimation method for integrated circuits

    Energy Technology Data Exchange (ETDEWEB)

    Liang Tao; Jia Xinzhang, E-mail: tliang@yahoo.cn [Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2011-04-15

    A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

  5. Soil erosion planning using sediment yield index method in the Nun Nadi watershed, India

    Directory of Open Access Journals (Sweden)

    Hasan Raja Naqvi

    2015-06-01

    Full Text Available The study identifies the extent of soil loss and proposes a method for prioritization of micro-watershed in the Nun Nadi watershed. The study used the Sediment Yield Index (SYI method, based on weighted overlays of soil, topography, rainfall erosivity and land use parameters in 24 micro watersheds. Accordingly the values and thematic layers were integrated as per the SYI model, and minimum and maximum sediment yield values were calculated. The priority ranks as per the sediment yield values were assigned to all micro-watersheds. Then the values were classified into four priority zones according to their composite scores. Almost 14 percent area of three micro-watersheds (SW5b, SW6a and SW7b showed very high priority; approximately 30.57 percent of the study area fell under the high priority zones. These areas require immediate attention. Conservation methods are suggested, and the locations of check dams are proposed after considering drainage, slope and soil loss. Keywords: Check dam, Prioritization, Nun Nadi watershed, Soil loss, SYI

  6. New method of measuring the K-shell fluorescence yield of As

    Energy Technology Data Exchange (ETDEWEB)

    Singh, K; Sahota, H S

    1984-02-01

    A new method for the determination of the K-shell fluorescence yield from the analysis of sum peaks observed with a high-resolution intrinsic Ge semiconductor detector in the decay of /sup 75/Se is described. The value found is ..omega..sub(K)(As)=0.574(18), which is in agreement with the fitted value of previous authors.

  7. Effect of Planting Methods on Maturity and Yield of Onion (Allium ...

    African Journals Online (AJOL)

    Key words: onion, planting method, sets, transplantings, direct seeding, bulb yield. .... The central four rows of each plot were harvested and ... Means with lower case letters represent values for planting methods effects and means with upper .... Acta Hort. 84: 27-32. Brewster, J.L. 2002. Onions and other vegetable Alliums.

  8. The buffer value of groundwater when well yield is limited

    Science.gov (United States)

    Foster, T.; Brozović, N.; Speir, C.

    2017-04-01

    A large proportion of the total value of groundwater in conjunctive use systems is associated with the ability to smooth out shortfalls in surface water supply during droughts. Previous research has argued that aquifer depletion in these regions will impact farmers negatively by reducing the available stock of groundwater to buffer production in future periods, and also by increasing the costs of groundwater extraction. However, existing studies have not considered how depletion may impact the productivity of groundwater stocks in conjunctive use systems through reductions in well yields. In this work, we develop a hydro-economic modeling framework to quantify the effects of changes in well yields on the buffer value of groundwater, and apply this model to an illustrative case study of tomato production in California's Central Valley. Our findings demonstrate that farmers with low well yields are forced to forgo significant production and profits because instantaneous groundwater supply is insufficient to buffer surface water shortfalls in drought years. Negative economic impacts of low well yields are an increasing function of surface water variability, and are also greatest for farmers operating less efficient irrigation systems. These results indicate that impacts of well yield reductions on the productivity of groundwater are an important economic impact of aquifer depletion, and that failure to consider this feedback may lead to significant errors in estimates of the value of groundwater management in conjunctive use systems.

  9. Nutrient retention values and cooking yield factors for three South African lamb and mutton cuts.

    Science.gov (United States)

    van Heerden, Salomina M; Strydom, Phillip E

    2017-11-01

    Nutrient content of raw and cooked foods is important for formulation of healthy diets. The retention of nutrients during cooking can be influenced by various factors, including animal age, carcass characteristics and cooking method, and these factors are often unique to specific countries. Here the effects of animal age (lamb and mutton) and carcass cut (shoulder, loin and leg) combined with cooking method (moist heat and dry heat) on yield and nutrient retention of selected nutrients of South African sheep carcasses were studied. Cooking yields and moisture retention were lower for lamb loin but higher for lamb leg. Energy and fat retention were higher for all cuts of mutton compared with lamb, while higher retention values for cholesterol were recorded for lamb. Mutton retained more iron (P = 0.10) and zinc and also more vitamin B 2 , B 6 and B 12 than lamb. Shoulder cooked according to moist heat cooking method retained more magnesium, potassium and sodium. Incorporating these retention and yield values into the South African Medical Research Council's Food Composition Tables provides a reliable reference to all concerned with nutrient content of food. It will also guide practitioners and primary industry to adjust animal production aimed at optimum nutrient content to specific diets. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  10. Investigations on evaluation method for yield strength of round bar undermatched joint

    International Nuclear Information System (INIS)

    Matsumoto, Toshimi; Satoh, Hiroshi; Wadayama, Yoshihide

    1988-01-01

    The objective values of the yield strength and fracture toughness are respectively more than 1200 MPa and 200 MPa √m at 4K on the structural material for the superconducting magnet container in the Fusion Reactor. It should be desirable to assure the above value for the properties of the weld metal used for the containers. The initial yielding behavior of the undermatched joint is investigated in this paper. Results are as follows. (1) On the nominal stress vs. nominal strain relationship at the central section of the undermatched metal of the joint, the stress increases higher than the yield stress of undermatched metal itself then gradually comes up to a constant value, after the whole area of the undermatched metal starts to generate plastic deformation as the stress reaches the yield stress of the metal. (2) The increase in the stress is caused by the restraint effect of the base metal on the plasticity, and the stress becomes larger with the larger strength ratio of the undermatched metal to the basemetal and with the smaller relative thickness of the joint. (3) The strain does not distribute uniformly at the central section of the undermatched metal along the radial direction during the initial yielding process of the joint. (4) In the case that the yield strength of the joints is considered as the proof stress desided for a constant offset strain, the relationship between the dimensionless yield strength of the joint to the yield stress of the base metal and the relative yield strength of the undermatched metal to the base metal cannot be not established consistently. (5) The assumption that the base metal is rigid, causes the excessive evaluation of the joint yield strength of theoretical analysis. (6) As the quantitative evaluation method, the stress vs. strain relationship and then the algebraic expression has been formulated for the initial yielding behavior of the joint. (author)

  11. Influence of rendering methods on yield and quality of chicken fat recovered from broiler skin

    Directory of Open Access Journals (Sweden)

    Liang-Kun Lin

    2017-06-01

    Full Text Available Objective In order to utilize fat from broiler byproducts efficiently, it is necessary to develop an appropriate rendering procedure and establish quality information for the rendered fat. A study was therefore undertaken to evaluate the influence of rendering methods on the amounts and general properties of the fat recovered from broiler skin. Methods The yield and quality of the broiler skin fat rendered through high and lower energy microwave rendering (3.6 W/g for 10 min and 2.4 W/g for 10 min for high power microwave rendering (HPMR and high power microwave rendering (LPMR, respectively, oven baking (OB, at 180°C for 40 min, and water cooking (WC, boiling for 40 min were compared. Results Microwave-rendered skin exhibited the highest yields and fat recovery rates, followed by OB, and WC fats (p<0.05. HPMR fat had the highest L*, a*, and b* values, whereas WC fat had the highest moisture content, acid values, and thiobarbituric acid (TBA values (p<0.05. There was no significant difference in the acid value, peroxide value, and TBA values between HPMR and LPMR fats. Conclusion Microwave rendering at a power level of 3.6 W/g for 10 min is suggested base on the yield and quality of chicken fat.

  12. 31 CFR 351.10 - What do I need to know about market yields, or market bid yields, to understand redemption value...

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What do I need to know about market yields, or market bid yields, to understand redemption value calculations in this subpart? 351.10 Section... Provisions § 351.10 What do I need to know about market yields, or market bid yields, to understand...

  13. Anoxic and aerobic values for the yield coefficient of the ...

    African Journals Online (AJOL)

    2008-04-15

    Apr 15, 2008 ... Simulations with dual values (aerobic and anoxic conditions) for heterotrophic yield (modified ... mittently aerated processes can achieve a significant nitrate ...... dynamic calibration and long-term validation for an intermittently.

  14. A smartphone-based apple yield estimation application using imaging features and the ANN method in mature period

    Directory of Open Access Journals (Sweden)

    Jianping Qian

    Full Text Available ABSTRACT: Apple yield estimation using a smartphone with image processing technology offers advantages such as low cost, quick access and simple operation. This article proposes distribution framework consisting of the acquisition of fruit tree images, yield prediction in smarphone client, data processing and model calculation in server client for estimating the potential fruit yield. An image processing method was designed including the core steps of image segmentation with R/B value combined with V value and circle-fitting using curvature analysis. This method enabled four parameters to be obtained, namely, total identified pixel area (TP, fitting circle amount (FC, average radius of the fitting circle (RC and small polygon pixel area (SP. A individual tree yield estimation model on an ANN (Artificial Neural Network was developed with three layers, four input parameters, 14 hidden neurons, and one output parameter. The system was used on an experimental Fuji apple (Malus domestica Borkh. cv. Red Fuji orchard. Twenty-six tree samples were selected from a total of 80 trees according to the multiples of the number three for the establishment model, whereby 21 groups of data were trained and 5 groups o data were validated. The R2 value for the training datasets was 0.996 and the relative root mean squared error (RRMSE value 0.063. The RRMSE value for the validation dataset was 0.284 Furthermore, a yield map with 80 apple trees was generated, and the space distribution o the yield was identified. It provided appreciable decision support for site-specific management.

  15. Yield strength measurement of shock-loaded metal by flyer-impact perturbation method

    Science.gov (United States)

    Ma, Xiaojuan; Shi, Zhan

    2018-06-01

    Yield strength is one of the most important physical properties of a solid material, especially far from its melting line. The flyer-impact perturbation method measures material yield strength on the basis of correlation between the yield strength under shock compression and the damping of oscillatory perturbations in the shape of a shock front passing through the material. We used flyer-impact experiments on targets with machined grooves on the impact surface of shock 6061-T6 aluminum to between 32 and 61 GPa and recorded the evolution of the shock front perturbation amplitude in the sample with electric pins. Simulations using the elastic-plastic model can be matched to the experiments, explaining well the form of the perturbation decay and constraining the yield strength of 6061-T6 aluminum to be 1.31-1.75 GPa. These results are in agreement with values obtained from reshock and release wave profiles. We conclude that the flyer-impact perturbation method is indeed a new means to measure material strength.

  16. Method for conversion of carbohydrate polymers to value-added chemical products

    Science.gov (United States)

    Zhang, Zongchao C [Norwood, NJ; Brown, Heather M [Kennewick, WA; Su, Yu [Richland, WA

    2012-02-07

    Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

  17. Forage yield and nutritive value of Tanzania grass under nitrogen supplies and plant densities

    Directory of Open Access Journals (Sweden)

    Fabrício Paiva de Freitas

    2012-04-01

    Full Text Available The objective of this experiment was to evaluate the nitrogen and plant density influence on the yield, forage dissection and nutritive value of Tanzania grass (Panicum maximum Jacq.. The design was of completely randomized blocks with three replications in a factorial arrangement with four nitrogen levels (0, 80, 160 or 320 kg/ha N and three plant densities (9, 25 or 49 plants/m². The plots were cut at 25 cm from soil level when the canopy reached 95% of light interception. The total dry matter forage yield and dry matter forage yield per harvest increased linearly with the nitrogen fertilization. The leaf and stem yield had the same response. The senesced forage yield was quadratically influenced by the nitrogen. The stems ratio in the morphologic composition was high in the high nitrogen levels and in the low plant densities. The leaf:stem ratio showed high values in this trial, but it was increased in plots without nitrogen and high plant density. The pre-grazing height was reduced with the increase in plant density. The nutritive value was favored by the nitrogen fertilization, which increased the crude protein level and reduced neutral detergent fiber and lignin. These factors increased the leaf and stem in vitro digestibility of organic matter. Nitrogen fertilization increases the forage yield of Tanzania grass under rotational grazing. After the establishment, plant density has little influence on the Tanzania grass yield and its forage dissection. The harvest with 95% light interception improves the structure and nutritive value of Tanzania grass pastures.

  18. Added-values of high spatiotemporal remote sensing data in crop yield estimation

    Science.gov (United States)

    Gao, F.; Anderson, M. C.

    2017-12-01

    Timely and accurate estimation of crop yield before harvest is critical for food market and administrative planning. Remote sensing derived parameters have been used for estimating crop yield by using either empirical or crop growth models. The uses of remote sensing vegetation index (VI) in crop yield modeling have been typically evaluated at regional and country scales using coarse spatial resolution (a few hundred to kilo-meters) data or assessed over a small region at field level using moderate resolution spatial resolution data (10-100m). Both data sources have shown great potential in capturing spatial and temporal variability in crop yield. However, the added value of data with both high spatial and temporal resolution data has not been evaluated due to the lack of such data source with routine, global coverage. In recent years, more moderate resolution data have become freely available and data fusion approaches that combine data acquired from different spatial and temporal resolutions have been developed. These make the monitoring crop condition and estimating crop yield at field scale become possible. Here we investigate the added value of the high spatial and temporal VI for describing variability of crop yield. The explanatory ability of crop yield based on high spatial and temporal resolution remote sensing data was evaluated in a rain-fed agricultural area in the U.S. Corn Belt. Results show that the fused Landsat-MODIS (high spatial and temporal) VI explains yield variability better than single data source (Landsat or MODIS alone), with EVI2 performing slightly better than NDVI. The maximum VI describes yield variability better than cumulative VI. Even though VI is effective in explaining yield variability within season, the inter-annual variability is more complex and need additional information (e.g. weather, water use and management). Our findings augment the importance of high spatiotemporal remote sensing data and supports new moderate

  19. Effects of nitrogen application method and weed control on corn yield and yield components.

    Science.gov (United States)

    Sepahvand, Pariya; Sajedi, Nurali; Mousavi, Seyed Karim; Ghiasvand, Mohsen

    2014-04-01

    The effects of nitrogen fertilizer application and different methods for weed control on yield and yield components of corn was evaluated in Khorramabad in 2011. The experiment was conducted as a split plot based on randomized complete block design in 3 replications. Nitrogen application was as main plot in 4 levels (no nitrogen, broadcasting nitrogen, banding nitrogen and sprayed nitrogen) and methods of weed control were in 4 levels (non-control weeds, application Equip herbicide, once hand control of weeds and application Equip herbicide+once time weeding) was as subplots. Result illustrated that effects of nitrogen fertilizer application were significant on grain and forage yield, 100 seeds weight, harvest index, grain number per row and cob weight per plant. Grain yield increased by 91.4 and 3.9% in application banding and broadcasting for nitrogen fertilizer, respectively, compared to the no fertilizer treatment. The results show improved efficiency of nitrogen utilization by banding application. Grain yield, harvest index, seed rows per cob, seeds per row and cob weight were increased by weed control. In the application of Equip herbicide+ hand weeding treatment corn grain yield was increased 126% in comparison to weedy control. It represents of the intense affects of weed competition with corn. The highest corn grain yield (6758 kg h(-1)) was related to the application banding of nitrogen fertilizer and Equip herbicide+once hand weeding.

  20. Slifers revisited: a method for determining yields independent of radiochemical measurements

    International Nuclear Information System (INIS)

    Rambo, J.T.

    1976-01-01

    It would be very desirable if an independent method other than radiochemical measurement were available to determine the yields of low-yield events in the alluviums and tuffs of areas 2, 9, and 10 at the Nevada Test Site. The successful application of slifers to the measurement of yields from high-yield events suggests that under some conditions they may also be usable with low-yield events. This view is supported by the evidence discussed here, which is based on direct experience with slifer yield measurements for low-yield events in porous media. Suggested methods for improving slifer yield determinations and a method for determining yields independent of radiochemical measurements are offered

  1. Systematics of Fission-Product Yields

    International Nuclear Information System (INIS)

    Wahl, A.C.

    2002-01-01

    Empirical equations representing systematics of fission-product yields have been derived from experimental data. The systematics give some insight into nuclear-structure effects on yields, and the equations allow estimation of yields from fission of any nuclide with atomic number Z F = 90 thru 98, mass number A F = 230 thru 252, and precursor excitation energy (projectile kinetic plus binding energies) PE = 0 thru ∼200 MeV--the ranges of these quantities for the fissioning nuclei investigated. Calculations can be made with the computer program CYFP. Estimates of uncertainties in the yield estimates are given by equations, also in CYFP, and range from ∼ 15% for the highest yield values to several orders of magnitude for very small yield values. A summation method is used to calculate weighted average parameter values for fast-neutron (∼ fission spectrum) induced fission reactions

  2. Systematics of Fission-Product Yields

    Energy Technology Data Exchange (ETDEWEB)

    A.C. Wahl

    2002-05-01

    Empirical equations representing systematics of fission-product yields have been derived from experimental data. The systematics give some insight into nuclear-structure effects on yields, and the equations allow estimation of yields from fission of any nuclide with atomic number Z{sub F} = 90 thru 98, mass number A{sub F} = 230 thru 252, and precursor excitation energy (projectile kinetic plus binding energies) PE = 0 thru {approx}200 MeV--the ranges of these quantities for the fissioning nuclei investigated. Calculations can be made with the computer program CYFP. Estimates of uncertainties in the yield estimates are given by equations, also in CYFP, and range from {approx} 15% for the highest yield values to several orders of magnitude for very small yield values. A summation method is used to calculate weighted average parameter values for fast-neutron ({approx} fission spectrum) induced fission reactions.

  3. Effects of cladode age on biomass yield and nutritional value of ...

    African Journals Online (AJOL)

    A randomized complete block design with five replications was used to assess biomass yield, in vitro dry matter digestibility (IVDMD) and nutritional value of spineless cactus (Opuntia ficus-indica) produced under drip irrigation and fertilization. Cladodes were harvested from an established plantation at 30, 37, 45, 60, ...

  4. Yield stress determination of a physical gel

    DEFF Research Database (Denmark)

    Hvidt, Søren

    2013-01-01

    Pluronic F127 solutions form gels in water with high elastic moduli. Pluronic gels can, however, only withstand small deformations and stresses. Different steady shear and oscillatory methods traditionally used to determine yield stress values are compared. The results show that the yield stresses...... values of these gels depend on test type and measurement time, and no absolute yield stress value can be determined for these physical gels....

  5. Fission product yields

    International Nuclear Information System (INIS)

    Valenta, V.; Hep, J.

    1978-01-01

    Data are summed up necessary for determining the yields of individual fission products from different fissionable nuclides. Fractional independent yields, cumulative and isobaric yields are presented here for the thermal fission of 235 U, 239 Pu, 241 Pu and for fast fission (approximately 1 MeV) of 235 U, 238 U, 239 Pu, 241 Pu; these values are included into the 5th version of the YIELDS library, supplementing the BIBFP library. A comparison is made of experimental data and possible improvements of calculational methods are suggested. (author)

  6. Comparison of the methods for determination of scintillation light yield

    CERN Document Server

    Sysoeva, E; Zelenskaya, O

    2002-01-01

    One of the most important characteristics of scintillators is the light yield. It depends not only on the properties of scintillators, but also on the conditions of measurements. Even for widely used crystals, such as alkali halide scintillators NaI(Tl) and CsI(Tl), light yield data, obtained by various authors, are different. Therefore, it is very important to choose the convenient method of the light yield measurements. In the present work, methods for the determination of the physical light yield, based on measurements of pulse amplitude, single-electron pulses and intrinsic photomultiplier resolution are discussed. These methods have been used for the measurements of light yield of alkali halide crystals and oxide scintillators. Repeatability and reproducibility of results were determined. All these methods are rather complicated in use, not for measurements, but for further data processing. Besides that, they demand a precise determination of photoreceiver's parameters, as well as determination of light ...

  7. Effects of cladode age on biomass yield and nutritional value of ...

    African Journals Online (AJOL)

    Effects of cladode age on biomass yield and nutritional value of intensively produced spineless cactus for ruminants. J.M Pinos-Rodríguez, J.C Velázquez, S.S González, S.S González, J.R Aguirre, J.C García, J.C García, G Álvarez, Y Jasso ...

  8. Harvesting Method Affects Water Dynamics and Yield of Sweet Orange with Huanglongbing

    Directory of Open Access Journals (Sweden)

    Said A. Hamido

    2018-03-01

    Full Text Available Changes in grove management practices may change crop water dynamics. The objective of this study was to estimate sap flow, stem water potential (Ψstem, and citrus yield as affected by harvesting methods in sweet orange (Citrus sinensis trees affected by Huanglongbing. The study was initiated in March 2015 for two years on five-year-old commercial sweet orange trees at a commercial grove located at Felda, Florida (26.61° N, 81.48° W on Felda fine sand soil (Loamy, siliceous, superactive, hyperthermic Arenic Endoaqualfs. All measurements were replicated before and after harvest in four experiments (A, B, C and D under hand and mechanical harvesting treatments. Sap flow measurements were taken on four trees per treatment with two sensors per tree. Sap flow measured by the heat balance method at hourly intervals during March and April of 2015 and 2016 significantly declined after harvesting by 25% and 35% after hand and mechanical harvesting, respectively. Ψstem measured after harvest was significantly higher than measurements before harvest. The average value of Ψstem measured increased by 10% and 6% after hand and mechanical harvesting, respectively. Mechanical harvesting exhibited lower fruit yields that averaged between 83%, 63%, 49% and 36% of hand-harvested trees under A, B, C and D experiments, respectively. It is concluded that the hand harvesting method is less stressful and less impactful on tree water uptake and fruit yield compared with mechanical harvesting.

  9. Determining the Threshold Value of Basil Yield Reduction and Evaluation of Water Uptake Models under Salinity Stress Condition

    Directory of Open Access Journals (Sweden)

    M. Sarai Tabrizi

    2016-10-01

    Full Text Available Introduction: Several mathematical models are being used for assessing the plant response to the salinity of the root zone. The salinity of the soil and water resources is a major challenge for agricultural sector in Iran. Several mathematical models have been developed for plant responses to the salinity stress. However, these models are often applicable in particular conditions. The objectives of this study were to evaluate the threshold value of Basil yield reduction, modeling Basil response to salinity and to evaluate the effectiveness of available mathematical models for the yield estimation of the Basil . Materials and Methods: The extensive experiments were conducted with 13 natural saline water treatments including 1.2, 1.8, 2, 2.2, 2.5, 2.8, 3, 3.5, 4, 5, 6, 8, and 10 dSm-1. Water salinity treatments were prepared by mixing Shoor River water with fresh water. In order to quantify the salinity effect on Basil yield, seven mathematical models including Maas and Hoffman (1977, van Genuchten and Hoffman (1984, Dirksen and Augustijn (1988, and Homaee et al., (2002 were used. One of the relatively recent methods for soil water content measurements is theta probes instrument. Theta probes instrument consists of four probes with 60 mm long and 3 mm diameter, a water proof container (probe structure, and a cable that links input and output signals to the data logger display. The advantages that have been attributed to this method are high precision and direct and rapid measurements in the field and greenhouse. The range of measurements is not limited like tensiometer and is from saturation to wilting point. In this study, Theta probes instrument was calibrated by weighing method for exact irrigation scheduling. Relative transpiration was calculated using daily soil water content changes. A coarse sand layer with 2 centimeters thick was used to decrease evaporation from the surface soil of the pots. Quantity comparison of the used models was done

  10. Comparison of breeding methods for forage yield in red clover

    Directory of Open Access Journals (Sweden)

    Libor Jalůvka

    2009-01-01

    Full Text Available Three methods of red clover (Trifolium pratense L. breeding for forage yield in two harvest years on locations in Bredelokke (Denmark, Hladké Životice (Czech Republic and Les Alleuds (France were compared. Three types of 46 candivars1, developed by A recurrent selection in subsequent generations (37 candivars, divided into early and late group, B polycross progenies (4 candivars and C ge­no-phe­no­ty­pic selection (5 candivars were compared. The trials were sown in 2005 and cut three times in 2006 and 2007; their evaluation is based primarily on total yield of dry matter. The candivars developed by polycross and geno-phenotypic selections gave significantly higher yields than candivars from the recurrent selection. However, the candivars developed by the methods B and C did not differ significantly. The candivars developed by these progressive methods were suitable for higher yielding and drier environment in Hladké Životice (where was the highest yield level even if averaged annual precipitation were lower by 73 and 113 mm in comparison to other locations, respectively; here was ave­ra­ge yield higher by 19 and 13% for B and C in comparison to A method. Highly significant interaction of the candivars with locations was found. It can be concluded that varieties specifically aimed to different locations by the methods B and C should be bred; also the parental entries should be selected there.

  11. A high throughput DNA extraction method with high yield and quality

    Directory of Open Access Journals (Sweden)

    Xin Zhanguo

    2012-07-01

    Full Text Available Abstract Background Preparation of large quantity and high quality genomic DNA from a large number of plant samples is a major bottleneck for most genetic and genomic analyses, such as, genetic mapping, TILLING (Targeting Induced Local Lesion IN Genome, and next-generation sequencing directly from sheared genomic DNA. A variety of DNA preparation methods and commercial kits are available. However, they are either low throughput, low yield, or costly. Here, we describe a method for high throughput genomic DNA isolation from sorghum [Sorghum bicolor (L. Moench] leaves and dry seeds with high yield, high quality, and affordable cost. Results We developed a high throughput DNA isolation method by combining a high yield CTAB extraction method with an improved cleanup procedure based on MagAttract kit. The method yielded large quantity and high quality DNA from both lyophilized sorghum leaves and dry seeds. The DNA yield was improved by nearly 30 fold with 4 times less consumption of MagAttract beads. The method can also be used in other plant species, including cotton leaves and pine needles. Conclusion A high throughput system for DNA extraction from sorghum leaves and seeds was developed and validated. The main advantages of the method are low cost, high yield, high quality, and high throughput. One person can process two 96-well plates in a working day at a cost of $0.10 per sample of magnetic beads plus other consumables that other methods will also need.

  12. A comparative ideotype, yield component and cultivation value analysis for spring wheat adaptation in Finland

    Directory of Open Access Journals (Sweden)

    Heikki Laurila

    2012-12-01

    Full Text Available In this study Mixed structural covariance, Path and Cultivation Value analyses and the CERES-Wheat crop model were used to evaluate vegetation and yield component variation affecting yield potential between different high-latitude (> 60° N lat. and mid-European (< 60° N lat. spring wheat (Triticum aestivum L. genotypes currently cultivated in southern Finland. Path modeling results from this study suggest that especially grains/ear, harvest index (HI and maximum 1000 kernel weight were significant factors defining the highest yield potential. Mixed and Cultivation value modeling results suggest that when compared with genotypes introduced for cultivation before 1990s, modern spring wheat genotypes have a significantly higher yielding capacity, current high yielding mid-European genotypes even exceeding the 5 t ha-1 non-potential baseline yield level (yb. Because of a forthcoming climate change, the new high yielding wheat genotypes have to adapt for elevated temperatures and atmospheric CO2 growing conditions in northern latitudes. The optimized ideotype profiles derived from the generic high-latitude and mid-European genotypes are presented in the results. High-latitude and mid-European ideotype profiles with factors estimating the effects of concurrent elevated CO2 and temperature levels with photoperiodical daylength effects can be utilized when designing future high yielding ideotypes adapted to future growing conditions. The CERES-Wheat ideotype modeling results imply, that with new high yielding mid-European ideotypes, the non-potential baseline yield (yb would be on average 5150 kg ha-1 level (+ 108 % vs. new high-latitude ideotypes (yb 4770 kg ha-1, 100% grown under the elevated CO2(700ppm×temperature(+3ºC growing conditions projected by the year 2100 climate change scenario in southern Finland.

  13. Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

    Energy Technology Data Exchange (ETDEWEB)

    Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie [Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse, France and Fondation STAE, 4 allee Emile Monso, BP 84234-31432, Toulouse Cedex 4 (France); Onera, DESP, 2 Avenue Edouard Belin, 31400 Toulouse (France)

    2010-09-15

    Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40{+-}1 eV.

  14. Methods for measurement of electron emission yield under low energy electron-irradiation by collector method and Kelvin probe method

    International Nuclear Information System (INIS)

    Tondu, Thomas; Belhaj, Mohamed; Inguimbert, Virginie

    2010-01-01

    Secondary electron emission yield of gold under electron impact at normal incidence below 50 eV was investigated by the classical collector method and by the Kelvin probe method. The authors show that biasing a collector to ensure secondary electron collection while keeping the target grounded can lead to primary electron beam perturbations. Thus reliable secondary electron emission yield at low primary electron energy cannot be obtained with a biased collector. The authors present two collector-free methods based on current measurement and on electron pulse surface potential buildup (Kelvin probe method). These methods are consistent, but at very low energy, measurements become sensitive to the earth magnetic field (below 10 eV). For gold, the authors can extrapolate total emission yield at 0 eV to 0.5, while a total electron emission yield of 1 is obtained at 40±1 eV.

  15. Test of two methods for determining herbaceous yield and botanical ...

    African Journals Online (AJOL)

    Above-ground herbaceous yield was estimated using the comparative yield method to win + 10% (p < 0,05) of the harvested mean using 150 harvested and 600 rated quadrats of 50 x 50 cm. The number of quadrats can be substantially reduced by improved observer rating. Using the dry mass rank method and 240 ...

  16. Seismic Methods of Identifying Explosions and Estimating Their Yield

    Science.gov (United States)

    Walter, W. R.; Ford, S. R.; Pasyanos, M.; Pyle, M. L.; Myers, S. C.; Mellors, R. J.; Pitarka, A.; Rodgers, A. J.; Hauk, T. F.

    2014-12-01

    Seismology plays a key national security role in detecting, locating, identifying and determining the yield of explosions from a variety of causes, including accidents, terrorist attacks and nuclear testing treaty violations (e.g. Koper et al., 2003, 1999; Walter et al. 1995). A collection of mainly empirical forensic techniques has been successfully developed over many years to obtain source information on explosions from their seismic signatures (e.g. Bowers and Selby, 2009). However a lesson from the three DPRK declared nuclear explosions since 2006, is that our historic collection of data may not be representative of future nuclear test signatures (e.g. Selby et al., 2012). To have confidence in identifying future explosions amongst the background of other seismic signals, and accurately estimate their yield, we need to put our empirical methods on a firmer physical footing. Goals of current research are to improve our physical understanding of the mechanisms of explosion generation of S- and surface-waves, and to advance our ability to numerically model and predict them. As part of that process we are re-examining regional seismic data from a variety of nuclear test sites including the DPRK and the former Nevada Test Site (now the Nevada National Security Site (NNSS)). Newer relative location and amplitude techniques can be employed to better quantify differences between explosions and used to understand those differences in term of depth, media and other properties. We are also making use of the Source Physics Experiments (SPE) at NNSS. The SPE chemical explosions are explicitly designed to improve our understanding of emplacement and source material effects on the generation of shear and surface waves (e.g. Snelson et al., 2013). Finally we are also exploring the value of combining seismic information with other technologies including acoustic and InSAR techniques to better understand the source characteristics. Our goal is to improve our explosion models

  17. Effects of different mechanized soil fertilization methods on corn nutrient accumulation and yield

    Science.gov (United States)

    Shi, Qingwen; Bai, Chunming; Wang, Huixin; Wu, Di; Song, Qiaobo; Dong, Zengqi; Gao, Depeng; Dong, Qiping; Cheng, Xin; Zhang, Yahao; Mu, Jiahui; Chen, Qinghong; Liao, Wenqing; Qu, Tianru; Zhang, Chunling; Zhang, Xinyu; Liu, Yifei; Han, Xiaori

    2017-05-01

    Aim: Experiments for mechanized corn soil fertilization were conducted in Faku demonstration zone. On this basis, we studied effects on corn nutrient accumulation and yield traits at brown soil regions due to different mechanized soil fertilization measures. We also evaluated and optimized the regulation effects of mechanized soil fertilization for the purpose of crop yield increase and production efficiency improvement. Method: Based on the survey of soil background value in the demonstration zone, we collected plant samples during different corn growth periods to determine and make statistical analysis. Conclusions: Decomposed cow dung, when under mechanical broadcasting, was able to remarkably increase nitrogen and potassium accumulation content of corns at their ripe stage. Crushed stalk returning combined with deep tillage would remarkably increase phosphorus accumulation content of corn plants. When compared with top application, crushed stalk returning combined with deep tillage would remarkably increase corn thousand kernel weight (TKW). Mechanized broadcasting of granular organic fertilizer and crushed stalk returning combined with deep tillage, when compared with surface application, were able to boost corn yield in the in the demonstration zone.

  18. Methods to determine the relative value of genetic traits in dairy cows to reduce greenhouse gas emissions along the chain.

    Science.gov (United States)

    van Middelaar, C E; Berentsen, P B M; Dijkstra, J; van Arendonk, J A M; de Boer, I J M

    2014-01-01

    Current decisions on breeding in dairy farming are mainly based on economic values of heritable traits, as earning an income is a primary objective of farmers. Recent literature, however, shows that breeding also has potential to reduce greenhouse gas (GHG) emissions. The objective of this paper was to compare 2 methods to determine GHG values of genetic traits. Method 1 calculates GHG values using the current strategy (i.e., maximizing labor income), whereas method 2 is based on minimizing GHG per kilogram of milk and shows what can be achieved if the breeding results are fully directed at minimizing GHG emissions. A whole-farm optimization model was used to determine results before and after 1 genetic standard deviation improvement (i.e., unit change) of milk yield and longevity. The objective function of the model differed between method 1 and 2. Method 1 maximizes labor income; method 2 minimizes GHG emissions per kilogram of milk while maintaining labor income and total milk production at least at the level before the change in trait. Results show that the full potential of the traits to reduce GHG emissions given the boundaries that were set for income and milk production (453 and 441kg of CO2 equivalents/unit change per cow per year for milk yield and longevity, respectively) is about twice as high as the reduction based on maximizing labor income (247 and 210kg of CO2 equivalents/unit change per cow per year for milk yield and longevity, respectively). The GHG value of milk yield is higher than that of longevity, especially when the focus is on maximizing labor income. Based on a sensitivity analysis, it was shown that including emissions from land use change and using different methods for handling the interaction between milk and meat production can change results, generally in favor of milk yield. Results can be used by breeding organizations that want to include GHG values in their breeding goal. To verify GHG values, the effect of prices and emissions

  19. Materials and methods to increase plant growth and yield

    Science.gov (United States)

    Kirst, Matias

    2017-05-16

    The present invention relates to materials and methods for modulating growth rates, yield, and/or resistance to drought conditions in plants. In one embodiment, a method of the invention comprises increasing expression of an hc1 gene (or a homolog thereof that provides for substantially the same activity), or increasing expression or activity of the protein encoded by an hc1 gene thereof, in a plant, wherein expression of the hc1 gene or expression or activity of the protein encoded by an hc1 gene results in increased growth rate, yield, and/or drought resistance in the plant.

  20. Rare-gas yields in 238U and 232Th fission by 14MeV neutrons, measured by an emanating method

    International Nuclear Information System (INIS)

    Feu Alvim, C.A.; Bocquet, J.P.; Brissot, R.; Crancon, J.; Moussa, A.

    1977-01-01

    A direct method, using emanation of rare gases by uranyle stearate and thorium stearate, has been applied to the measurement of cumulative fractional yields of certain isotopes of krypton and xenon, in the fissions of 238 U and 232 Th by 14MeV-neutrons. The independent yields of the same isotopes were measured previously by means of isotopic on-line separation. From these results, the widths of the mass and charge distributions, the relative chain yields, the fractional cumulative yields of certain bromine and iodine isotopes, the values of Zsub(p) the most probable charge, in the isobaric chains 87-93 and 137-142, and the elemental yields of krypton and xenon were calculated [fr

  1. Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers

    International Nuclear Information System (INIS)

    Petit, Jean-Yves; Wirquin, Eric; Duthoit, Bruno

    2005-01-01

    Self-consolidating concretes (SCC) were proved to be very dependant on concreting temperature and the elapsed time. To enhance the concreting conditions of these flowable concretes, it is important to have a better knowledge of their rheological behavior, depending on the kind of superplasticizer used. The variation of the plastic viscosity and the yield value with the elapsed time and temperature must be accurately quantified. However, the methods of measuring these parameters are expensive and unsuitable with a good forecast of the material behavior due to numerous parameters that interact with each other. A simplest method to study the variation of these rheological parameters, depending on the mixture design, is proposed, using the micromortar, which derivates from the studied SCC. Moreover, to forecast the concrete behavior on the site, a simple thermodynamical approach of the cementitious matrix behavior through the study of the hydration kinetics is described

  2. Climate Variability and Sugarcane Yield in Louisiana.

    Science.gov (United States)

    Greenland, David

    2005-11-01

    This paper seeks to understand the role that climate variability has on annual yield of sugarcane in Louisiana. Unique features of sugarcane growth in Louisiana and nonclimatic, yield-influencing factors make this goal an interesting and challenging one. Several methods of seeking and establishing the relations between yield and climate variables are employed. First, yield climate relations were investigated at a single research station where crop variety and growing conditions could be held constant and yield relations could be established between a predominant older crop variety and a newer one. Interviews with crop experts and a literature survey were used to identify potential climatic factors that control yield. A statistical analysis was performed using statewide yield data from the American Sugar Cane League from 1963 to 2002 and a climate database. Yield values for later years were adjusted downward to form an adjusted yield dataset. The climate database was principally constructed from daily and monthly values of maximum and minimum temperature and daily and monthly total precipitation for six cooperative weather-reporting stations representative of the area of sugarcane production. The influence of 74 different, though not independent, climate-related variables on sugarcane yield was investigated. The fact that a climate signal exists is demonstrated by comparing mean values of the climate variables corresponding to the upper and lower third of adjusted yield values. Most of these mean-value differences show an intuitively plausible difference between the high- and low-yield years. The difference between means of the climate variables for years corresponding to the upper and lower third of annual yield values for 13 of the variables is statistically significant at or above the 90% level. A correlation matrix was used to identify the variables that had the largest influence on annual yield. Four variables [called here critical climatic variables (CCV

  3. Optimum values of average L-shell fluorescence yields for the elements 40 ≤ Z ≤ 95

    International Nuclear Information System (INIS)

    Mittal, Raj; Singh, N.; Allawadhi, K.L.; Sood, B.S.

    1993-01-01

    The optimum values of average L-shell fluorescence yields W L , for elements 40 ≤ Z ≤ 95 have been determined using seven sets of experimental and theoretical values of W L reported by various workers. The first and second sets comprise of values of W L evaluated from L X-ray emission cross-sections measured for 22 elements by Mann and for 27 elements by Singh et al respectively. The third set contains most reliable experimental values compiled by Bombynek et al. In the remaining four sets the values of W L calculated from the semi empirical and theoretical values of L-subshell fluorescence yields W 1 and Coster-Kronig transition probabilities (f ij ) and photoionisation and proton induced ionisation cross sections are reported. All the values of W L for a given element reported in different sets are not same and for some elements the values differ from one another by more than 15%. The optimum value of W L for each element amongst the seven values is taken as a mean of group of those values whose standard deviation is almost less than 3% of the mean value. The optimum values are further fitted to the standard cubic form and the coefficients of the fit are a 0 = 0.3542371, a 1 =-0.489949E-02, a 2 0.2052273E-03 and a 3 =-0.8144938E-06. The values thus generated agree with optimum values within nearly 2%. (author). 10 refs., 1 tab

  4. A singular-value method for reconstruction of nonradial and lossy objects.

    Science.gov (United States)

    Jiang, Wei; Astheimer, Jeffrey; Waag, Robert

    2012-03-01

    Efficient inverse scattering algorithms for nonradial lossy objects are presented using singular-value decomposition to form reduced-rank representations of the scattering operator. These algorithms extend eigenfunction methods that are not applicable to nonradial lossy scattering objects because the scattering operators for these objects do not have orthonormal eigenfunction decompositions. A method of local reconstruction by segregation of scattering contributions from different local regions is also presented. Scattering from each region is isolated by forming a reduced-rank representation of the scattering operator that has domain and range spaces comprised of far-field patterns with retransmitted fields that focus on the local region. Methods for the estimation of the boundary, average sound speed, and average attenuation slope of the scattering object are also given. These methods yielded approximations of scattering objects that were sufficiently accurate to allow residual variations to be reconstructed in a single iteration. Calculated scattering from a lossy elliptical object with a random background, internal features, and white noise is used to evaluate the proposed methods. Local reconstruction yielded images with spatial resolution that is finer than a half wavelength of the center frequency and reproduces sound speed and attenuation slope with relative root-mean-square errors of 1.09% and 11.45%, respectively.

  5. Effects of Salinity and Nitrogen Application Methods on Yield and Yield Components of Wheat (Triticum aestivum L.

    Directory of Open Access Journals (Sweden)

    R Farshid

    2012-07-01

    Full Text Available To evaluate interaction of salinity stress and nitrogen use methods on yield and yield components, in experiment was conducted in split plot in randomized complete block with 3 replications. Treatments included: salinity of irrigation water levels 1.5, 4.4 and 7.9 ds/m as main plots, and nitrogen treatments 1. using N fertilizer at 3 stage in soil, 2. using two third N fertilizer in soil at planting and tillering and heading and one third in form of foliar application of N at tillering, 4. using and one third in form of foliar application at heading, 3. Using two third of N fertilizer in soil at planting one third of N fertilizer in soil at planting and two third in form of foliar application at tillering and heading, as sub plots. Results this study showed that increased in salt stress significant decreased total yield components such that showed decrease 41/5 kg/h in yield with increase in per unite salinity. Also methods of nitrogen application in salinity condition, have significant effects on total yield components. At the tillering, one stage of foliar with soil application of urea could increase spike no. m-2 and kernels of spike compared with other treatments. Foliar application of urea at heading stage increased kernels weight.

  6. Influence of micronutrients and their method of application on yield and yield components of sunflower

    International Nuclear Information System (INIS)

    Baraich, A.A.K.; Gandahi, A.W.

    2016-01-01

    The sunflower (Helianthus annuus L.) has been recognized as a crop with high potentials that can successfully meet future oil requirements of the country. Formulation of micronutrients (MN) based fertilizer, in terms of application rate and method, and uptake of MN by sunflower has the ability not only to ensure nutrients availability to plants particularly in MN-limiting environments but also can manipulate the environmental hazards associated with over inorganic fertilization. To support this view, clear experimental evidence is still lacking. In addition, the current experiments aimed to evaluate the influence of MN and its method of application on yield and yield components of sunflower cultivars/hybrids. Three sunflower cultivars (HO-1, Hysun-39 and Ausigold-62) along with three MN (Z, B and Fe) and two application methods (soil and foliar) were used in the experiment. Three Zn application rate (3, 5 and 8 kg ha-1) along with 0.75 kg ha-1 B and 0.30 kg Fe ha-1 were used in four combinations such as 0-0-0, 0-0.75-0.30, 0-0.75-0.30, 3-0.75-0.30, 5-0.75-0.30, 8-0.75-0.30 kg Z, B and Fe ha-1, respectively. A control (no MN) treatment was also included for comparison. Two year averaged study exhibited that foliar application of Zn, B and Fe at rate of 8-0.30-0.75 kg ha-1 increased stem girth, head diameter, number of seeds head-1, seed weight head-1, seed index, oil content and seed yield by 21%, 27%, 13%, 34%, 19%, 24 and 31%, respectively over control. Among cultivars/hybrids, the hybrids HO-1 and Hysun-39 had taller plants, seed weight head-1, seeds head-1 and earlier in flowering and maturity. Flowering and maturity was delayed in Ausi Gold-62 with higher seed index and oil content. It is concluded that foliar application of micronutrients at the rate of 8+0.75+0.30 Zn, B and Fe kg ha-1 had substantially improved yield and yield related traits of sunflower cultivars HO-1, Hysun-39 and Ausi gold-62. (author)

  7. A Production Efficiency Model-Based Method for Satellite Estimates of Corn and Soybean Yields in the Midwestern US

    Directory of Open Access Journals (Sweden)

    Andrew E. Suyker

    2013-11-01

    Full Text Available Remote sensing techniques that provide synoptic and repetitive observations over large geographic areas have become increasingly important in studying the role of agriculture in global carbon cycles. However, it is still challenging to model crop yields based on remotely sensed data due to the variation in radiation use efficiency (RUE across crop types and the effects of spatial heterogeneity. In this paper, we propose a production efficiency model-based method to estimate corn and soybean yields with MODerate Resolution Imaging Spectroradiometer (MODIS data by explicitly handling the following two issues: (1 field-measured RUE values for corn and soybean are applied to relatively pure pixels instead of the biome-wide RUE value prescribed in the MODIS vegetation productivity product (MOD17; and (2 contributions to productivity from vegetation other than crops in mixed pixels are deducted at the level of MODIS resolution. Our estimated yields statistically correlate with the national survey data for rainfed counties in the Midwestern US with low errors for both corn (R2 = 0.77; RMSE = 0.89 MT/ha and soybeans (R2 = 0.66; RMSE = 0.38 MT/ha. Because the proposed algorithm does not require any retrospective analysis that constructs empirical relationships between the reported yields and remotely sensed data, it could monitor crop yields over large areas.

  8. Estimating milk yield and value losses from increased somatic cell count on US dairy farms.

    Science.gov (United States)

    Hadrich, J C; Wolf, C A; Lombard, J; Dolak, T M

    2018-04-01

    Milk loss due to increased somatic cell counts (SCC) results in economic losses for dairy producers. This research uses 10 mo of consecutive dairy herd improvement data from 2013 and 2014 to estimate milk yield loss using SCC as a proxy for clinical and subclinical mastitis. A fixed effects regression was used to examine factors that affected milk yield while controlling for herd-level management. Breed, milking frequency, days in milk, seasonality, SCC, cumulative months with SCC greater than 100,000 cells/mL, lactation, and herd size were variables included in the regression analysis. The cumulative months with SCC above a threshold was included as a proxy for chronic mastitis. Milk yield loss increased as the number of test days with SCC ≥100,000 cells/mL increased. Results from the regression were used to estimate a monetary value of milk loss related to SCC as a function of cow and operation related explanatory variables for a representative dairy cow. The largest losses occurred from increased cumulative test days with a SCC ≥100,000 cells/mL, with daily losses of $1.20/cow per day in the first month to $2.06/cow per day in mo 10. Results demonstrate the importance of including the duration of months above a threshold SCC when estimating milk yield losses. Cows with chronic mastitis, measured by increased consecutive test days with SCC ≥100,000 cells/mL, resulted in higher milk losses than cows with a new infection. This provides farm managers with a method to evaluate the trade-off between treatment and culling decisions as it relates to mastitis control and early detection. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Methods for conversion of carbohydrates in ionic liquids to value-added chemicals

    Science.gov (United States)

    Zhao, Haibo [The Woodlands, TX; Holladay, Johnathan E [Kennewick, WA; Zhang, Zongchao C [Norwood, NJ

    2011-05-10

    Methods are described for converting carbohydrates including, e.g., monosaccharides, disaccharides, and polysaccharides in ionic liquids to value-added chemicals including furans, useful as chemical intermediates and/or feedstocks. Fructose is converted to 5-hydroxylmethylfurfural (HMF) in the presence of metal halide and acid catalysts. Glucose is effectively converted to HMF in the presence of chromium chloride catalysts. Yields of up to about 70% are achieved with low levels of impurities such as levulinic acid.

  10. Comparison of herbage yield, nutritive value and ensilability traits of three ryegrass species evaluated for the Irish Recommended List

    Directory of Open Access Journals (Sweden)

    Burns G. A.

    2015-06-01

    Full Text Available This study examined 169 of the newest varieties of three ryegrass species, perennial (Lolium perenne L., Italian (Lolium multiflorum Lam. and hybrid (Lolium boucheanum Kunth, from Recommended List trials in Ireland. The traits examined were yield, dry matter concentration, three nutritive value traits (in vitro dry matter digestibility, water-soluble carbohydrate on a dry matter basis and crude protein concentration and two ensilability traits (buffering capacity and water soluble carbohydrate concentration on an aqueous phase basis. Varietal monocultures of each species underwent a six cut combined simulated grazing and silage management in each of two years following sowing. Perennial ryegrass yielded less than both other species in one-year-old swards, but less than only Italian ryegrass in two-year-old swards, but generally had the higher in vitro dry matter digestibility and crude protein values. Italian ryegrass displayed the most favourable ensilability characteristics of the three species with perennial ryegrass less favourable and hybrid ryegrass intermediate. Overall, despite the high yields and favourable nutritive value and ensilability traits recorded, the general differences between the three ryegrass species studied were in line with industry expectations. These findings justify assessing the nutritive value and ensilability of ryegrass species, in addition to yield, to allow farmers select species that match farming enterprise requirements.

  11. Methods for high yield production of terpenes

    Energy Technology Data Exchange (ETDEWEB)

    Kutchan, Toni; Higashi, Yasuhiro; Feng, Xiaohong

    2017-01-03

    Provided are enhanced high yield production systems for producing terpenes in plants via the expression of fusion proteins comprising various combinations of geranyl diphosphate synthase large and small subunits and limonene synthases. Also provided are engineered oilseed plants that accumulate monoterpene and sesquiterpene hydrocarbons in their seeds, as well as methods for producing such plants, providing a system for rapidly engineering oilseed crop production platforms for terpene-based biofuels.

  12. Similar estimates of temperature impacts on global wheat yield by three independent methods

    DEFF Research Database (Denmark)

    Liu, Bing; Asseng, Senthold; Müller, Christoph

    2016-01-01

    The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produ......-method ensemble, it was possible to quantify ‘method uncertainty’ in addition to model uncertainty. This significantly improves confidence in estimates of climate impacts on global food security.......The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produce...... similar estimates of temperature impact on wheat yields at global and national scales. With a 1 °C global temperature increase, global wheat yield is projected to decline between 4.1% and 6.4%. Projected relative temperature impacts from different methods were similar for major wheat-producing countries...

  13. The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

    Directory of Open Access Journals (Sweden)

    A Ardakani

    2016-12-01

    Full Text Available Introduction Salinity is a major abiotic stress that affects approximately 7% of the world’s total land area. Cotton (Gossypium barbadense L. is considered as one of the most important cash crops which is widely used for agricultural and industrial purposes. Although, cotton is classified as one of the most salt-tolerant major crops but its growth and development are adversely affected by soil or water salinity. Understanding salinity and fertilizer interaction can mitigate salinity stress and improving crop yield. Potassium (K is an essential nutrient that affects most of the biochemical and physiological processes that are involved in plant resistance to biotic and abiotic stresses. Proper management of K fertilizer is especially important in saline soils where K application might reduce the adverse effects of salinity on plant growth and yield. There is a little information about rate and application method of K on yield and yield component of cotton in saline condition. The objective of this study was to determine the effects of rate and application method of K on yield and yield component of cotton in soil and water saline condition. Materials and Methods The experiment was carried out at Sabzevar Agriculture and Natural Resources Research center (Haresabad, 30km southwest of Sabzevar (32◦32N, 51◦23E and 1630 above mean sea level,in 2014.This experiment was conducted as split plot design based on randomized complete block design with three replications. Factors were: K rate (75 and 150kg ha-1 Solopotash (containing 50% K2O and 18% S comprising the main plot and application method (25%at planting+25% at first flowering and 50%at early boll development (25P+25F+50B, 25%at planting+50% at first flowering and 25%at early boll development (25P+50F+25B, 25%at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+50B, 25% at planting+25% at vegetative stage and 50% at first

  14. A method of self-pursued boundary value on a body and the Magnus effect calculated with this method

    Science.gov (United States)

    Yoshino, Fumio; Hayashi, Tatsuo; Waka, Ryoji

    1991-03-01

    A computational method, designated 'SPB', is proposed for the automatic determination of the stream function Phi on an arbitrarily profiled body without recourse to empirical factors. The method is applied to the case of a rotating, circular cross-section cylinder in a uniform shear flow, and the results obtained are compared with those of both the method in which the value of Phi is fixed on a body and the conventional empirical method; it is in view of this established that the SPB method is very efficient and applicable to both steady and unsteady flows. The SPB method, in addition to yielding the aerodynamic forces acting on a cylinder, shows that the Magnus effect lift force decreases as the velocity gradient of the shear flow increases while the cylinder's rotational speed is kept constant.

  15. Three methods to determine the yields of DNA double-strand breaks

    International Nuclear Information System (INIS)

    Erzgraeber, G.; Lapidus, I.L.

    1985-01-01

    A possibility of determining the yield of DNA double-strand breaks in cells of the Chinese hamster (V79-4) by finding the amount of DNA released as a result of breaks and by determining the relative sedimentation velocity of DNA-membrane complexes affected by ionizing radiations with different physical characteristics is discussed. Results of the analysis are compared with the data obtained by a traditional method of sedimentation in the neutral sucrose density gradient. Comparative characterization of the methods is discussed. The yields of DNA double-strand breaks determined by the suggested independent methods are in good agreement, which opens possibilities of studying induction and repair of double-strand breaks by means of simpler and more reliable methods

  16. Geoelectrical parameter-based multivariate regression borehole yield model for predicting aquifer yield in managing groundwater resource sustainability

    Directory of Open Access Journals (Sweden)

    Kehinde Anthony Mogaji

    2016-07-01

    Full Text Available This study developed a GIS-based multivariate regression (MVR yield rate prediction model of groundwater resource sustainability in the hard-rock geology terrain of southwestern Nigeria. This model can economically manage the aquifer yield rate potential predictions that are often overlooked in groundwater resources development. The proposed model relates the borehole yield rate inventory of the area to geoelectrically derived parameters. Three sets of borehole yield rate conditioning geoelectrically derived parameters—aquifer unit resistivity (ρ, aquifer unit thickness (D and coefficient of anisotropy (λ—were determined from the acquired and interpreted geophysical data. The extracted borehole yield rate values and the geoelectrically derived parameter values were regressed to develop the MVR relationship model by applying linear regression and GIS techniques. The sensitivity analysis results of the MVR model evaluated at P ⩽ 0.05 for the predictors ρ, D and λ provided values of 2.68 × 10−05, 2 × 10−02 and 2.09 × 10−06, respectively. The accuracy and predictive power tests conducted on the MVR model using the Theil inequality coefficient measurement approach, coupled with the sensitivity analysis results, confirmed the model yield rate estimation and prediction capability. The MVR borehole yield prediction model estimates were processed in a GIS environment to model an aquifer yield potential prediction map of the area. The information on the prediction map can serve as a scientific basis for predicting aquifer yield potential rates relevant in groundwater resources sustainability management. The developed MVR borehole yield rate prediction mode provides a good alternative to other methods used for this purpose.

  17. Application of a Bayesian/generalised least-squares method to generate correlations between independent neutron fission yield data

    International Nuclear Information System (INIS)

    Fiorito, L.; Diez, C.; Cabellos, O.; Stankovskiy, A.; Van den Eynde, G.; Labeau, P.E.

    2014-01-01

    Fission product yields are fundamental parameters for several nuclear engineering calculations and in particular for burn-up/activation problems. The impact of their uncertainties was widely studied in the past and evaluations were released, although still incomplete. Recently, the nuclear community expressed the need for full fission yield covariance matrices to produce inventory calculation results that take into account the complete uncertainty data. In this work, we studied and applied a Bayesian/generalised least-squares method for covariance generation, and compared the generated uncertainties to the original data stored in the JEFF-3.1.2 library. Then, we focused on the effect of fission yield covariance information on fission pulse decay heat results for thermal fission of 235 U. Calculations were carried out using different codes (ACAB and ALEPH-2) after introducing the new covariance values. Results were compared with those obtained with the uncertainty data currently provided by the library. The uncertainty quantification was performed with the Monte Carlo sampling technique. Indeed, correlations between fission yields strongly affect the statistics of decay heat. (authors)

  18. Similar Estimates of Temperature Impacts on Global Wheat Yield by Three Independent Methods

    Science.gov (United States)

    Liu, Bing; Asseng, Senthold; Muller, Christoph; Ewart, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.; hide

    2016-01-01

    The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produce similar estimates of temperature impact on wheat yields at global and national scales. With a 1 C global temperature increase, global wheat yield is projected to decline between 4.1% and 6.4%. Projected relative temperature impacts from different methods were similar for major wheat-producing countries China, India, USA and France, but less so for Russia. Point-based and grid-based simulations, and to some extent the statistical regressions, were consistent in projecting that warmer regions are likely to suffer more yield loss with increasing temperature than cooler regions. By forming a multi-method ensemble, it was possible to quantify 'method uncertainty' in addition to model uncertainty. This significantly improves confidence in estimates of climate impacts on global food security.

  19. Similar estimates of temperature impacts on global wheat yield by three independent methods

    Science.gov (United States)

    Liu, Bing; Asseng, Senthold; Müller, Christoph; Ewert, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.; Rosenzweig, Cynthia; Aggarwal, Pramod K.; Alderman, Phillip D.; Anothai, Jakarat; Basso, Bruno; Biernath, Christian; Cammarano, Davide; Challinor, Andy; Deryng, Delphine; Sanctis, Giacomo De; Doltra, Jordi; Fereres, Elias; Folberth, Christian; Garcia-Vila, Margarita; Gayler, Sebastian; Hoogenboom, Gerrit; Hunt, Leslie A.; Izaurralde, Roberto C.; Jabloun, Mohamed; Jones, Curtis D.; Kersebaum, Kurt C.; Kimball, Bruce A.; Koehler, Ann-Kristin; Kumar, Soora Naresh; Nendel, Claas; O'Leary, Garry J.; Olesen, Jørgen E.; Ottman, Michael J.; Palosuo, Taru; Prasad, P. V. Vara; Priesack, Eckart; Pugh, Thomas A. M.; Reynolds, Matthew; Rezaei, Ehsan E.; Rötter, Reimund P.; Schmid, Erwin; Semenov, Mikhail A.; Shcherbak, Iurii; Stehfest, Elke; Stöckle, Claudio O.; Stratonovitch, Pierre; Streck, Thilo; Supit, Iwan; Tao, Fulu; Thorburn, Peter; Waha, Katharina; Wall, Gerard W.; Wang, Enli; White, Jeffrey W.; Wolf, Joost; Zhao, Zhigan; Zhu, Yan

    2016-12-01

    The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO2 fertilization effects, produce similar estimates of temperature impact on wheat yields at global and national scales. With a 1 °C global temperature increase, global wheat yield is projected to decline between 4.1% and 6.4%. Projected relative temperature impacts from different methods were similar for major wheat-producing countries China, India, USA and France, but less so for Russia. Point-based and grid-based simulations, and to some extent the statistical regressions, were consistent in projecting that warmer regions are likely to suffer more yield loss with increasing temperature than cooler regions. By forming a multi-method ensemble, it was possible to quantify `method uncertainty’ in addition to model uncertainty. This significantly improves confidence in estimates of climate impacts on global food security.

  20. Soybean yield modeling using bootstrap methods for small samples

    Energy Technology Data Exchange (ETDEWEB)

    Dalposso, G.A.; Uribe-Opazo, M.A.; Johann, J.A.

    2016-11-01

    One of the problems that occur when working with regression models is regarding the sample size; once the statistical methods used in inferential analyzes are asymptotic if the sample is small the analysis may be compromised because the estimates will be biased. An alternative is to use the bootstrap methodology, which in its non-parametric version does not need to guess or know the probability distribution that generated the original sample. In this work we used a set of soybean yield data and physical and chemical soil properties formed with fewer samples to determine a multiple linear regression model. Bootstrap methods were used for variable selection, identification of influential points and for determination of confidence intervals of the model parameters. The results showed that the bootstrap methods enabled us to select the physical and chemical soil properties, which were significant in the construction of the soybean yield regression model, construct the confidence intervals of the parameters and identify the points that had great influence on the estimated parameters. (Author)

  1. A novel OPC method to reduce mask volume with yield-aware dissection

    International Nuclear Information System (INIS)

    Xie Chunlei; Chen Ye; Shi Zheng

    2013-01-01

    Growing data volume of masks tremendously increases manufacture cost. The cost increase is partially due to the complicated optical proximity corrections applied on mask design. In this paper, a yield-aware dissection method is presented. Based on the recognition of yield related mask context, the dissection result provides sufficient degrees of freedom to keep fidelity on critical sites while still retaining the frugality of modified designs. Experiments show that the final mask volume using the new method is reduced to about 50% of the conventional method. (semiconductor technology)

  2. Effect of Different Tillage Methods and Cover Crop Types on Yield and Yield Components of Wheat

    Directory of Open Access Journals (Sweden)

    Z Sharefee

    2018-05-01

    Full Text Available Introduction Conservation agriculture is an appropriate strategy for maintaining and improving agricultural resources which increases crop production and stability and also provides environmental protection. This attitude contributes to the conservation of natural resources (soil, water, and air and is one of the most effective ways to overcome the drought crisis, water management and compensation of soil organic matter in arid and semi-arid regions. The practice of zero-tillage decreases the mineralization of organic matter and contributes to the sequestration of organic carbon in the soil. Higher amounts of organic matter in the soil improve soil structure and root growth, water infiltration and retention, and cation exchange capacity. In addition, zero-tillage reduces soil compaction and crop production costs. Cover crops are cultivated to protect the soil from erosion and elements loss by leaching or runoff and also improve the soil moisture and temperature. Given that South Khorasan farmers still use traditional methods of cultivation of wheat, and cover crops have no place in their farming systems, the aim of this study was to investigate the effect of cover crops types and tillage systems on yield and yield components of wheat in Birjand region. Materials and Methods A split plot field experiment was conducted based on randomized complete block design with three replications at the Research Farm of the University of Birjand over the growing season of 2014-2015. The main factor was the type of tillage (no-till, reduced tillage and conventional tillage and cover crop type (chickling pea (Lathyrus sativus, rocket salad (Eruca sativa, triticale (X Triticosecale witmack, barley (Hordeum vulgaris and control (no cover crop was considered as sub plots. Cover crops were planted on July 2014. Before planting wheat, cover crops were dried through spraying paraquat herbicide using a backpack sprayer at a rate of 3 L ha-1. Then the three tillage

  3. The nutritive value, yield and botanical composition of irrigated ...

    African Journals Online (AJOL)

    The performances of grass and grass/legume swards at three levels of nitrogen were compared under irrigation over a three-year period. The swards were grazed by dairy cows and the influence of nitrogen on dry matter yield, protein content, protein yield and botanical composition was measured. Keywords: ...

  4. Evaluation of Technical and Yield Parameters of Wheat Seeding Methods with Different Seeding Rates in south Khuzestan

    Directory of Open Access Journals (Sweden)

    J Habibi Asl

    2012-05-01

    Full Text Available This study was conducted during two years (2007-2009 in Shawoor Agricultural Research Station on a silty-clay soil. Experiment conducted in split plots in a Randomized Complete Blocks Design in three replications. Main plots were planting methods including centrifugal broadcaster (P1, centrifugal broadcaster + furrower (P2, seed drill (P3, seed drill + furrower (P4, three lines bed drilling (P5 and four lines bed drilling (P6. Subplots were included seed rates of 120, 160, 200 and 240 kg.ha-1. The results showed that P2 method with 14.91 litter.ha-1 and P3 method with 5.02 litter.ha-1 had the highest and lowest fuel consumption respectively. P3 method with 1.462 h.ha-1 and P5 method with 0.620 h.ha-1 required maximum and minimum total operation time respectively. P2 method with 0.684 ha.h-1 had minimum field capacity. Field capacity of P5 and P6 with averagely 1.67 ha.h-1 was maximum. Field capacity of all drilling methods (P3, P4, P5 and P6 was significantly more than that of broadcasting methods (P1 and P2. The highest seed spacing uniformity (87.2% was belonged to P6 method and the lowest value (54.7% was for P1 method. By using drilling methods of P3 and P5 (or P6 instead of P1 method total cost was reduced 41% and 29% respectively. The results of variance analysis of data showed that the difference between planting methods in case of wheat grain yield and yield components was not significant. However, the seed rate had significant effect on some yield components. Suggestion for cropping of wheat Chamran variety in silty-clay soil in Khuzestan province, used P5, P6 and P3 methods are recommended respectively with seed rate of 120 - 160 kg.ha-1.

  5. Effect of Integrated Weed Management Methods on Yield and Yield Components of Corn (Zea mays L. in Kermanshah Province, Iran

    Directory of Open Access Journals (Sweden)

    R. Amini

    2017-08-01

    Full Text Available Introduction: Corn (Zea mays L. is cultivated widely throughout the world and has the highest production among the cerealsafter rice and wheat. In Iran the total production of corn in 2013 was more than 2540000 tons. Weeds are one of the greatest limiting factors to decrease corn yield in Iran as the average yield loss due to weeds in the fields of Kermanshah in 2009 was 17.32 %. The herbicides are the main weed control method in conventional cropping systems but their application has been increased herbicide resistant weeds and environmental pollution. Integrated weed management combines all applicable including chemical and non-chemical methods to reduce the effect of weeds in the cropping systems. Thus, Weed control strategies such as tillage, mulch, cover crops and intercropping could be used for integrated weed management of corn. Previous studies showed that crop residues such as rye (Secale sereal L., wheat (Triticum aestivum L., barley (Hordeum vulgare L. and clover (Trifolium sp., cover crops and living mulch could inhibit weed germination and growth. Therefore the objective of this study was evaluating the effects of some integrated weed management treatments on weed characteristics, yield components and grain yield of corn. Materials and methods: In order to evaluate the effect of some weed management treatments on corn (Zea mays L. yield an experiment was conducted in 2014 in Ravansar, Kermanshah, Iran. This study was arranged based on randomized complete block design with 10 treatments and three replications. The weed management treatments were including 1-chemical control followed by mechanical control (application of nicosulfuron at a dose of 80 g.a.i.ha-1 + cultivator 40 days after emergence 2- chemical control followed by mechanical control (application of 2,4-D+MCPA at a dose of 675 g.a.i.ha-1 + cultivator 40 days after emergence 3- cultural control followed by mechanical control (planting hairy vetch (Vicia villosa in the fall

  6. Effect of high-energy electron irradiation of chicken meat on thiobarbituric acid values, shear values, odor, and cooked yield

    International Nuclear Information System (INIS)

    Heath, J.L.; Owens, S.L.; Tesch, S.; Hannah, K.W.

    1990-01-01

    Experiments were conducted to determine whether electron-beam irradiation would affect shear values, yield, odor, and thiobarbituric acid (TBA) values of chicken tissues. Broiler breasts (pectoralis superficialis) and whole thighs were irradiated with an electron-beam accelerator at levels to produce adsorbed doses of 100, 200, and 300 krads on the surface of the sample. The thigh samples were stored for 2, 4, and 8 days before testing for TBA values. The depth to which the radiation had penetrated the pectoralis superficialis muscle was also determined. Radiation penetrated 22 mm into slices of pectoralis superficialis muscle when 100 krad was absorbed by the surface of the tissue. The dose absorbed beneath the tissue surface to a depth of 10 mm was larger than the dose absorbed at the surface. The absorbed dose decreased as the depth of penetration increased. For cooked breast tissue, the shear values and moisture content were not affected by the absorbed radiation. Cooking losses of aged breast tissue were not affected by irradiation, but cooking losses were reduced in breast tissue that had not been aged. Irradiating uncooked thigh and uncooked breast samples produced a characteristic odor that remained after the thighs were cooked but was not detectable after the breast samples were cooked. With two exceptions, no significantly different TBA values were found that could be attributed to irradiation

  7. Yields, market values and n use efficiency in flue-cured tobacco influenced by time of basal n fertilization

    International Nuclear Information System (INIS)

    Xie Zhijian; Tu Shuxin; Li Jinping; Xu Rubing; Chen Zhenguo; Wang Xuelong

    2010-01-01

    A field experiment with 15 N isotope tracing micro-plots was carried out to study the effects of basal N fertilizer application time (0 d, 15 d, 30 d before the transplanting) on the yields, market values and N uptake, utilization and distribution in different organs of flue-cured tobacco (FCT) in two ecological tobacco production areas (Zhaojiashan and Laowan) of Xiangfan City, Hubei Province. The results showed that supplying N fertilizer significantly increased the yields and market values of FCT by 13% ∼ 40% and 14% ∼ 35% for the experimental site of Zhaojiashan (lower altitude) and Laowan (higher altitude), respectively. Compared to applying basal fertilizer at 0 d before transplanting, applying basal fertilizer at 15 d or 30 d before transplanting increased the market values by 10% ∼ 30% (P < 0.05). And early application of basal N fertilizer (30 d before transplanting) increased N accumulation by 8% ∼ 26% as compared with that of applying basal N fertilizer at 0 d or 15 d before transplanting in the two ecological areas. There was no significant effects of basal N application time on N fertilizer efficiency in lower altitude site, but increasing by 3% ∼ 6% in higher altitude site. These results indicated that properly earlier (15 d for example) supplication of basal N fertilizer could improve the N fertilizer efficiency, and thus increase the yields and market values of FCT, especially in higher altitude areas with less sunshine and lower temperature. (authors)

  8. Choosing algorithms for TB screening: a modelling study to compare yield, predictive value and diagnostic burden.

    Science.gov (United States)

    Van't Hoog, Anna H; Onozaki, Ikushi; Lonnroth, Knut

    2014-10-19

    To inform the choice of an appropriate screening and diagnostic algorithm for tuberculosis (TB) screening initiatives in different epidemiological settings, we compare algorithms composed of currently available methods. Of twelve algorithms composed of screening for symptoms (prolonged cough or any TB symptom) and/or chest radiography abnormalities, and either sputum-smear microscopy (SSM) or Xpert MTB/RIF (XP) as confirmatory test we model algorithm outcomes and summarize the yield, number needed to screen (NNS) and positive predictive value (PPV) for different levels of TB prevalence. Screening for prolonged cough has low yield, 22% if confirmatory testing is by SSM and 32% if XP, and a high NNS, exceeding 1000 if TB prevalence is ≤0.5%. Due to low specificity the PPV of screening for any TB symptom followed by SSM is less than 50%, even if TB prevalence is 2%. CXR screening for TB abnormalities followed by XP has the highest case detection (87%) and lowest NNS, but is resource intensive. CXR as a second screen for symptom screen positives improves efficiency. The ideal algorithm does not exist. The choice will be setting specific, for which this study provides guidance. Generally an algorithm composed of CXR screening followed by confirmatory testing with XP can achieve the lowest NNS and highest PPV, and is the least amenable to setting-specific variation. However resource requirements for tests and equipment may be prohibitive in some settings and a reason to opt for symptom screening and SSM. To better inform disease control programs we need empirical data to confirm the modeled yield, cost-effectiveness studies, transmission models and a better screening test.

  9. Effects of Tillage Methods on Some Soil Physical Properties, Growth and Yield of Water Melon in a Semi-Arid Region of Nigeria

    Directory of Open Access Journals (Sweden)

    A. Dauda

    2017-02-01

    Full Text Available An appropriate tillage method is necessary to create an optimum seed bed condition for optimum crop growth and yield. Two-year field experiment was conducted in 2013 and 2014 to investigate the effects of different tillage methods on the physical properties of sandy loam soil, growth and yield of water melon (Citrullus vulgaris in a semi-arid environment. The Tillage treatments were disc ploughing plus disc harrowing (DP+DH, double disc ploughing (DDP, double disc harrowing (DDH, disc ploughing (DP and disc harrowing (DH as minimum tillage (MT and zero tillage (ZT and direct drilling method (control. The watermelon seeds were Planted manually placing three (3 seeds per hole at an interval of 1.5m along the rows and 50cm between the rows at an average depth of 5cm. The treatments were laid in a randomized complete block design (RCBD with four replications. Results showed that disc ploughing + disc harrowing (DP+DH was found to be more appropriate and profitable tillage method in improving soil physical properties and growth and yield of water melon in a sandy loam soil. Watermelon yield, fruit weight (FW, fruit length (FL, fruit diameter (FD and leaf area index (LAI were significantly influenced (P=0.05, but influence of tillage treatments were not significant on the number of fruit per plant (NFPP. A numerical value of 31.0t/ha, 26.0, 5.4kg, 29.0cm, and 33.8cm were recorded for maximum crop yield, NFPP, FW, FD and FL respectively in DP+DH-treated plots. For zero tillage (ZT treatment, maximum of crop yield and NFPP were 26.5t/ha and 20.0 respectively. Thus for enhanced growth and yield of watermelon, DP/DH would be more preferable. The orthodox method of zero tillage is out rightly discouraged

  10. Forage yield and nutritive value of Panicum maximum genotypes in the Brazilian savannah

    Directory of Open Access Journals (Sweden)

    Francisco Duarte Fernandes

    2014-02-01

    Full Text Available The narrow genetic variability of grasslands and the incidence of new biotic and abiotic stresses have motivated the selection of new Panicum maximum genotypes for use as forage for beef cattle in the Brazilian savannah. This study aimed to evaluate forage yield and nutritive value of P. maximum genotypes including 14 accessions (PM30 to PM43, four intraspecific hybrids (PM44 to PM47 and six cultivars (Aruana, Massai, Milênio, Mombaça, Tanzania and Vencedor, examining 24 genotypes over two years (2003 and 2004. Milênio cultivar was the genotype with the highest dry matter yield (DMY in both years (18.4 t ha-1 and 20.9 t ha-1, respectively although it presented a high proportion of stems (~ 30%. Genotypes that showed higher Leaf DMY in both years were the accession PM34 (14.7 t ha-1 and the hybrid PM46 (14.0 t ha-1, while Mombaça and Tanzania yielded 12.5 and 11.0 t ha-1, respectively. Leaf organic matter digestibility and leaf DMY for PM40 and PM46 genotypes exceeded the mean (> 656 g kg-1 and > 11.7 t ha-1, respectively. For this reason, PM40 and PM46 can be considered promising P. maximum genotypes for use as forage for grazing systems in the Brazilian savannah.

  11. Measurement of ground-water storage change and specific yield using the temporal-gravity method near Rillito Creek, Tucson, Arizona

    Science.gov (United States)

    Pool, Donald R.; Schmidt, Werner

    1997-01-01

    The temporal-gravity method was used to estimate ground-water storage change and specific -yield values at wells near Rillito Creek, Tucson, Arizona, between early December 1992 and early January 1994. The method applies Newton's Law of Gravitation to measure changes in the local gravitational field of the Earth that are caused by changes in the mass and volume of ground water. Gravity at 50 stations in a 6-square-mile area was measured repeatedly relative to gravity at two bedrock stations. Ephemeral recharge through streamflow infiltration during the winter of 1992-93 resulted in water-level rises and gravity increases near Rillito Creek as the volume of ground water in storage increased. Water levels in wells rose as much as 30 feet, and gravity increased as much as 90 microgals. Water levels declined and gravity decreased near the stream after the last major winter flow but continued to rise and increase, respectively, in downgradient areas. Water levels and gravity relative to bedrock were measured at 10 wells. Good linear correlations between water levels and gravity values at five wells nearest the stream allowed for the estimation of specific-yield values for corresponding stratigraphic units assuming the mass change occurred in an infinite horizonal slab of uniform thickness. Specific-yield values for the stream-channel deposits at three wells ranged from 0.15 to 0.34, and correlation coefficients ranged from 0.81 to 0.99. Specific-yield values for the Fort Lowell Formation at three wells ranged from 0.07 to 0.18, and correlation coefficients ranged from 0.82 to 0.93. Specific-yield values were not calculated for the five wells farthest from the stream because of insufficient water-level and gravity change or poor correlations between water level and gravity. Poor correlations between water levels and gravity resulted from ground-water storage change in perched aquifers and in the unsaturated zone near ephemeral streams. Seasonal distributions of ground

  12. VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

    African Journals Online (AJOL)

    journal

    Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.

  13. Effect of plastic viscosity and yield value on spray characteristics of magnesium-slurry fuel

    Science.gov (United States)

    Prok, George M

    1957-01-01

    Magnesium slurries were sprayed onto a sheet of paper from an air-atomizing injector. Drop sizes and distributions were then determined from photomicrographs. Four different surface-active additives were used in preparing the slurries to give plastic viscosities between 0.22 and 0.51 poise and yield values between 150 and 810 dynes-cm(exp 2). It was found that there was no significant variation in the spray characteristics of these slurries when tested under the same conditions.

  14. The Value of Mixed Methods Research: A Mixed Methods Study

    Science.gov (United States)

    McKim, Courtney A.

    2017-01-01

    The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

  15. Planting pattern and weed control method influence on yield production of corn (Zea mays L.)

    Science.gov (United States)

    Purba, E.; Nasution, D. P.

    2018-02-01

    Field experiment was carried out to evaluate the influence of planting patterns and weed control methods on the growth and yield of corn. The effect of the planting pattern and weed control method was studied in a split plot design. The main plots were that of planting pattern single row (25cm x 60cm), double row (25cm x 25cm x 60cm) and triangle row ( 25cm x 25cm x 25cm). Subplot was that of weed control method consisted five methods namely weed free throughout the growing season, hand weeding, sprayed with glyphosate, sprayed with paraquat, and no weeding.. Result showed that both planting pattern and weed control method did not affect the growth of corn. However, planting pattern and weed control method significantly affected yield production. Yield resulted from double row and triangle planting pattern was 14% and 41% higher, consecutively, than that of single row pattern. The triangle planting pattern combined with any weed control method produced the highest yield production of corn.

  16. Tillage methods and mulch on water saving and yield of spring maize in Chitwan

    Directory of Open Access Journals (Sweden)

    Ishwari Prasad Upadhyay

    2016-12-01

    Full Text Available Tillage methods and mulch influences the productivity and water requirement of spring maize hence a field experiment was conducted at the National Maize Research Program, Rampur in spring seasons of 2011 and 2012 with the objectives to evaluate different tillage methods with and without mulch on water requirement and grain yield of spring maize. The experiment was laid out in two factors factorial randomized complete design with three replications. The treatments consisted of tillage methods (Permanent bed, Zero tillage and Conventional tillage and mulch (with and without. Irrigation timing was fixed as knee high stage, tasseling stage and milking/dough stage. Data on number of plants, number of ears, thousand grain weight and grain yield were recorded and analysed using GenStat. Two years combined result showed that the effect of tillage methods and mulch significant influenced grain yield and water requirement of spring maize. The maize grain yield was the highest in permanent beds with mulch (4626 kg ha-1 followed by zero tillage with mulch (3838 kg ha-1. Whereas total water applied calculated during the crop period were the highest in conventional tillage without mulch followed by conventional tillage with mulch. The permanent bed with mulch increased the yield and reduced the water requirement of spring maize in Chitwan.

  17. Timing of Peripheral Blood Stem Cell Yield: Comparison of Alternative Methods with the Classic Method for CD34+ Cell Determination

    Directory of Open Access Journals (Sweden)

    I. Fatorova

    2014-01-01

    Full Text Available Hematopoietic stem cells (HSCs, still represent a certain mystery in biology, have a unique property of dividing into equal cells and repopulating the hematopoietic tissue. This potential enables their use in transplantation treatments. The quality of the HSC grafts for transplantation is evaluated by flow cytometric determination of the CD34+ cells, which enables optimal timing of the first apheresis and the acquisition of maximal yield of the peripheral blood stem cells (PBSCs. To identify a more efficient method for evaluating CD34+ cells, we compared the following alternative methods with the reference method: hematopoietic progenitor cells (HPC enumeration (using the Sysmex XE-2100 analyser, detection of CD133+ cells, and quantification of aldehyde dehydrogenase activity in the PBSCs. 266 aphereses (84 patients were evaluated. In the preapheretic blood, the new methods produced data that were in agreement with the reference method. The ROC curves have shown that for the first-day apheresis target, the optimal predictive cut-off value was 0.032 cells/mL for the HPC method (sensitivity 73.4%, specificity 69.3%. HPC method exhibited a definite practical superiority as compared to other methods tested. HPC enumeration could serve as a supplementary method for the optimal timing of the first apheresis; it is simple, rapid, and cheap.

  18. Predictive ability of machine learning methods for massive crop yield prediction

    Directory of Open Access Journals (Sweden)

    Alberto Gonzalez-Sanchez

    2014-04-01

    Full Text Available An important issue for agricultural planning purposes is the accurate yield estimation for the numerous crops involved in the planning. Machine learning (ML is an essential approach for achieving practical and effective solutions for this problem. Many comparisons of ML methods for yield prediction have been made, seeking for the most accurate technique. Generally, the number of evaluated crops and techniques is too low and does not provide enough information for agricultural planning purposes. This paper compares the predictive accuracy of ML and linear regression techniques for crop yield prediction in ten crop datasets. Multiple linear regression, M5-Prime regression trees, perceptron multilayer neural networks, support vector regression and k-nearest neighbor methods were ranked. Four accuracy metrics were used to validate the models: the root mean square error (RMS, root relative square error (RRSE, normalized mean absolute error (MAE, and correlation factor (R. Real data of an irrigation zone of Mexico were used for building the models. Models were tested with samples of two consecutive years. The results show that M5-Prime and k-nearest neighbor techniques obtain the lowest average RMSE errors (5.14 and 4.91, the lowest RRSE errors (79.46% and 79.78%, the lowest average MAE errors (18.12% and 19.42%, and the highest average correlation factors (0.41 and 0.42. Since M5-Prime achieves the largest number of crop yield models with the lowest errors, it is a very suitable tool for massive crop yield prediction in agricultural planning.

  19. Comparison of Four Weighting Methods in Fuzzy-based Land Suitability to Predict Wheat Yield

    Directory of Open Access Journals (Sweden)

    Fatemeh Rahmati

    2017-06-01

    , 1 neuron, 4 neurons, multivariate regression and PLS and RMSE values in these methods were 6.38, 6.4, 6.38 and 6.38 Ton/ha, respectively. The correlation coefficient between the observed and predicted yield indicated the partially appropriate selection of the factors and evaluation approach. Conclusion: The results of weight calculation were not showed significant difference in three methods (neural network, PLS, regression. The predicted yield was somewhat closer to the observed yield when 1 neuron was introduced to the neural network than 4 neurons. The maximum coefficient of determination as well as the minimum RMSE was achieved for weights calculated by multivariate regression. Because the method is almost accurate and easy to use, it is recommended in this study. The coefficient of determination generally became low because different traditional management practices were carried out in the study area. Finally, in regard to achieved results about the used methods, it is suggested to take into account the management factors in land suitability processes and compare the other weight calculated methods in land suitability evaluation based on fuzzy logic.

  20. Multi-approach assessment of the spatial distribution of the specific yield: application to the Crau plain aquifer, France

    Science.gov (United States)

    Seraphin, Pierre; Gonçalvès, Julio; Vallet-Coulomb, Christine; Champollion, Cédric

    2018-03-01

    Spatially distributed values of the specific yield, a fundamental parameter for transient groundwater mass balance calculations, were obtained by means of three independent methods for the Crau plain, France. In contrast to its traditional use to assess recharge based on a given specific yield, the water-table fluctuation (WTF) method, applied using major recharging events, gave a first set of reference values. Then, large infiltration processes recorded by monitored boreholes and caused by major precipitation events were interpreted in terms of specific yield by means of a one-dimensional vertical numerical model solving Richards' equations within the unsaturated zone. Finally, two gravity field campaigns, at low and high piezometric levels, were carried out to assess the groundwater mass variation and thus alternative specific yield values. The range obtained by the WTF method for this aquifer made of alluvial detrital material was 2.9- 26%, in line with the scarce data available so far. The average spatial value of specific yield by the WTF method (9.1%) is consistent with the aquifer scale value from the hydro-gravimetric approach. In this investigation, an estimate of the hitherto unknown spatial distribution of the specific yield over the Crau plain was obtained using the most reliable method (the WTF method). A groundwater mass balance calculation over the domain using this distribution yielded similar results to an independent quantification based on a stable isotope-mixing model. This agreement reinforces the relevance of such estimates, which can be used to build a more accurate transient hydrogeological model.

  1. Effect of Harvest Methods on Yield and Quaiityof·Marketable ...

    African Journals Online (AJOL)

    cultivars of (ii1ferent growth habits: '0~'cf/~~' 'q;a~i/Giulq' rffP ... Key words: Greerihollse' rose, h~est methods, growth-habits, 'yield and guality of flowers. ,-. ',' ! ' ! ' . • . . ) Introduction .... dure" and "Duncan's Multiple Range test'''·re- spedivel~' of a ...

  2. Responses of Seed Yield, Yield Components and Some Morpho-physiological Traits of Wheat Cultivars (Triticum aestivum to the Application Methods of Fulzyme Biofertilizer

    Directory of Open Access Journals (Sweden)

    A. Eslami

    2014-10-01

    Full Text Available To study the effect of application methods of Fulzym biofertilizer (containing Bacillus subtilis on yield, yield components and some morpho-physiological characteristics of four cultivars wheat, an experiment was conducted in field of Astan Quds Razavi in 2010- 2011. The experiment performed was in split plot based on randomized complete block design with three replications. Four wheat cultivars (Falat, Pishtaz, Bahar and Toos were assigned to main plots and four biofertilizer application methods (as seed inoculation, using in irrigation water, seed inoculation and irrigation and control to sub plots. Results indicated that Falat had the lowest plant height (61.5 cm than other varieties. Plant height of Toos and Pishtaz were about 14.5 percent higher than Falat. Application methods of Fulzym increased chlorophyll content and plant height. Highest chlorophyll contents were obtained when seeds inoculated by Fulzyme and used through irrigation. At the end of growing season, it was found that chlorophyll content of Falat and Toos flag leaves were higher than Pishtaz and Bahar. It was also revealed that Bahar when Fulzyme was used showed a better response to treatments than other varieties as for as biological and seed yields were concerned. Highest seed yield produced by irrigation and combination of seed inoculation and irrigation (9063 and 8609 kg.ha-1 and lowest seed yield (5858 kg.ha-1 to Falat in the control treatment.

  3. Effect of extraction method on the yield of furanocoumarins from fruits of Archangelica officinalis Hoffm.

    Science.gov (United States)

    Waksmundzka-Hajnos, M; Petruczynik, A; Dragan, A; Wianowska, D; Dawidowicz, A L

    2004-01-01

    Optimal conditions for the extraction and analysis of furanocoumarins from fruits of Archangelica officinalis Hoffm. have been determined. The following extraction methods were used: exhaustive extraction in a Soxhlet apparatus, ultrasonication at 25 and 60 degrees C, microwave-assisted solvent extraction in open and closed systems, and accelerated solvent extraction (ASE). In most cases the yields of furanocoumarins were highest using the ASE method. The effects of extracting solvent, temperature and time of extraction using this method were investigated. The highest yield of furanocoumarins by ASE was obtained with methanol at 100-130 degrees C for 10 min. The extraction yields of furanocoumarins from plant material by ultrasonication at 60 degrees C and microwave-assisted solvent extraction in an open system were comparable to the extraction yields obtained in the time- and solvent-consuming exhaustive process involving the Soxhlet apparatus.

  4. A photometric method for the estimation of the oil yield of oil shale

    Science.gov (United States)

    Cuttitta, Frank

    1951-01-01

    A method is presented for the distillation and photometric estimation of the oil yield of oil-bearing shales. The oil shale is distilled in a closed test tube and the oil extracted with toluene. The optical density of the toluene extract is used in the estimation of oil content and is converted to percentage of oil by reference to a standard curve. This curve is obtained by relating the oil yields determined by the Fischer assay method to the optical density of the toluene extract of the oil evolved by the new procedure. The new method gives results similar to those obtained by the Fischer assay method in a much shorter time. The applicability of the new method to oil-bearing shale and phosphatic shale has been tested.

  5. Angular dependence of sputtering yield of TiSi sub 2 layers and analysis of titanium disilicide by SIMS and SCANIIR methods

    Energy Technology Data Exchange (ETDEWEB)

    Antonov, S L; Valiev, K A; Vasiliev, A G; Orlikovsky, A A [AN SSSR, Moscow (USSR). Inst. of Physics and Technology

    1989-11-01

    The values of sputtering yields of TiSi{sub 2}, Ti and Si layers are determined for Ar{sup +} (8 keV) bombardment at angles 0-80{sup 0}. It is shown that the theoretical functions that we have suggested for TiSi{sub 2} sputtering yields from angular Ar{sup +} bombardment, which are based on models of bicomponent compounds sputtering under normal ion bombardment, are in good agreement with the experimental curve for TiSi{sub 2}. The calibration curves for the determination of TiSi{sub x} layer compositions by SIMS and SCANIIR methods (in dynamic regime) are presented. It is shown with the help of the static SIMS method (E{sub AR+} = 3 keV) that not only can the TiSi{sub x} composition be determined but the TiSi{sub 2} crystal phase can also be identified. (author).

  6. Effect of different form of mineral nitrogen fertilizer and organic fertilization with compost on yield and quality of various field-grown vegetable crops (radish, carrot, spinach and tubers celery). Quality investigation through electrochemical method and the determination of p-value

    International Nuclear Information System (INIS)

    El-Sherbiny, M.

    1998-10-01

    This study was conducted to determine the effect of nitrogen form (calcium-nitrate, nitramoncal, ammonsulfate and urea) and the compost fertilization on yield and quality of different vegetable crops, which were grown under field condition at the same nitrogen fertilizer levels. In addition to evaluate the yield, the nitrate contents and p-value have been tested to determine the quality. Following results have been found: yield: the mineral nitrogen form had no significant effect on yield by radish, carrot, and celery. Spinach is positive responded by a different form of nitrogen fertilizer. The same yield results were nearly obtained by the use of compost, compared to another nitrogen fertilizer. Nitrate content: the nitrate content is investigated in edible plant parts. The nitrogen forms have been effected nitrate contents on researched vegetable crops. Generally, the minimum nitrate content is found in control variant and by use of compost, and too by ammonsulfate or urea fertilizer. The maximum nitrate content is reached by use of calcium-nitrate and nitramoncal fertilizer. Spinach leaves had less nitrate contents than stalks. P-value: results of examination shows a major relation between nitrogen fertilizer form and p-value. With the exception of carrot, had compost and control variants of radish, spinach and celery the highest significant p-value in comparison with another nitrogen fertilizer. The lowest p-value is obtained by application of calcium-nitrate and nitramoncal fertilizer, also for a better quality. (author)

  7. HIGH YIELD AND RAPID SYNTHESES METHODS FOR PRODUCING METALLO-ORGANIC SALTS

    DEFF Research Database (Denmark)

    2005-01-01

    A new method for preparing salts of metal cations and organic acids, especially divalent salts of alkaline earth metal ions from group II of the periodic system and carboxylic acids. The method comprising the use of a high temperature (about 90° or more) and, optionally. high pressure, in order...... to obtain a higher yield, purity and faster reaction speed than obtained with known synthesis methods. In particular, the present invention relates to the production of strontium salts of carboxylic acids. Novel strontium salts are also provided by the present method....

  8. R-values

    International Nuclear Information System (INIS)

    Roberts, K.

    2009-01-01

    I'll try to keep this short and simple. R LANL = (beta cpm of X exp on system 'A')/ (beta cpm of 99 Mo exp on system 'A')/ (beta cpm of X on system 'A', from thermal on 235 U)/ (beta cpm of 99 Mo on system 'A', from thermal on 235 U). As I understand it, the above equation is the historical (as well as current) way of determining R-values using data from beta counting at LANL. The ratio in the denominator, a little 'r', is the 'baseline' or 'calibration' value for a specific beta detector. Over time, if the detector 'drifts' one would see a variation in this 'r' during a thermal calibration measurement. This baseline is what LANL likes to track to monitor specific detector performance - this is not relevant to LLNL where gamma detection is used for determining R-values. LANL states that uncertainty is only dependent upon the count statistics for the isotopes measured. If one tries to convert this to an atom basis, the uncertainties will increase due to the incorporation of the uncertainties in the nuclear data used to convert the cpm to atoms. LLNL switched to gamma detection methods in the 1970s thus replacing our beta counting effort. The equation below is how we have since determined R-values. The numerator ratios atom values of isotopes that are determined by measuring gamma cpm (usually? using several peaks per isotope) and then converting to particle decay in dpm using detector efficiency for each peak and the appropriate branch ratio for each gamma emission. Isotope decay is then converted to atoms using specific activity, mass or volume?, and Avogadro's number. The denominator is simply the ratio of published, cumulative fission product chain yields for isotopes produced in a thermal irradiation on 235U - values of England and Ryder are used by LLNL for the NTNF program. Uncertainties in LLNL R-values are dependent upon gamma counting statistics as well as the nuclear data for each isotope. R LLNL = (Atoms of X exp )/(Atoms of 99 Mo exp )/(Cumulative

  9. Soybean (Glycine max L. Merr. Yield Gap Analysis using Boundary Line Method in Gorgan and Aliabad Katul

    Directory of Open Access Journals (Sweden)

    Alireza Nehbandani

    2017-12-01

    Full Text Available Introduction Increasing the production of crops has been a necessity to reach food security for growing population. Since "expanding acreage" is almost impossible, "increasing the yield per unit of area", is the only possible option. Closing the gap between actual yield and potential yield (yield gap is one of the important methods to increase yield per unit of area. It is necessary to increase yield to primarily identify the factors that contributing in the yield gap in each area. Recognizing potentials as well as the impact of each limiting factor on yield individually, plays an important role in determining the alternative management strategies to achieve maximum performance. Therefore, the present study was conducted in Gorgan and Aliabad Katul county for simultaneous recognition of best management practices, percentage of the affected fields, estimation of soybean yield potential and gaps using boundary line analysis. Material and Methods To quantify the production and estimation of soybean yield gap in Gorgan and Aliabad Katul, Farm management information of 224 soybean farms in the years 2010, 2011, 2013 and 2014 were collected. This information was collected through continuous farm monitoring during the growing season as along with face to face interviews with the farmers. Farms were selected by consulting with agricultural service centers expert in Gorgan and Aliabad districts. Based on the available information at the service centers, only farms , which is different in terms of acreage, cultural practices and harvesting operations were selected. In this study, by plotting the distribution of the yield obtained in each field as the dependent variable against the independent variables (crop management activities, using SAS software and an appropriate function was fitted on the upper edge of the data distribution. Results and Discussion The results showed that the average yield on the farms surveyed was 3507 Kg.ha-1 and by improving crop

  10. Domestic estimated breeding values and genomic enhanced breeding values of bulls in comparison with their foreign genomic enhanced breeding values.

    Science.gov (United States)

    Přibyl, J; Bauer, J; Čermák, V; Pešek, P; Přibylová, J; Šplíchal, J; Vostrá-Vydrová, H; Vostrý, L; Zavadilová, L

    2015-10-01

    Estimated breeding values (EBVs) and genomic enhanced breeding values (GEBVs) for milk production of young genotyped Holstein bulls were predicted using a conventional BLUP - Animal Model, a method fitting regression coefficients for loci (RRBLUP), a method utilizing the realized genomic relationship matrix (GBLUP), by a single-step procedure (ssGBLUP) and by a one-step blending procedure. Information sources for prediction were the nation-wide database of domestic Czech production records in the first lactation combined with deregressed proofs (DRP) from Interbull files (August 2013) and domestic test-day (TD) records for the first three lactations. Data from 2627 genotyped bulls were used, of which 2189 were already proven under domestic conditions. Analyses were run that used Interbull values for genotyped bulls only or that used Interbull values for all available sires. Resultant predictions were compared with GEBV of 96 young foreign bulls evaluated abroad and whose proofs were from Interbull method GMACE (August 2013) on the Czech scale. Correlations of predictions with GMACE values of foreign bulls ranged from 0.33 to 0.75. Combining domestic data with Interbull EBVs improved prediction of both EBV and GEBV. Predictions by Animal Model (traditional EBV) using only domestic first lactation records and GMACE values were correlated by only 0.33. Combining the nation-wide domestic database with all available DRP for genotyped and un-genotyped sires from Interbull resulted in an EBV correlation of 0.60, compared with 0.47 when only Interbull data were used. In all cases, GEBVs had higher correlations than traditional EBVs, and the highest correlations were for predictions from the ssGBLUP procedure using combined data (0.75), or with all available DRP from Interbull records only (one-step blending approach, 0.69). The ssGBLUP predictions using the first three domestic lactation records in the TD model were correlated with GMACE predictions by 0.69, 0.64 and 0

  11. Yield and nutritional quality of greenhouse lettuce (Lactuca sativa L. as affected by genotype and production methods

    Directory of Open Access Journals (Sweden)

    Govedarica-Lučić Aleksandra

    2014-01-01

    Full Text Available Greenhouse experiments were conducted in winter growing seasons in order to evaluate the effects of genotype and production methods on yield and nutritional quality of lettuce (Lactuca sativa L.. A three-year (2009-2011 study was conducted by randomized block system in a greenhouse without additional heating. The trial included three genotypes of lettuce (Archimedes RZ, Santoro RZ, Kibou RZ. Each row with these genotypes was exposed to the following variants of covering: control-planting on bare soil, mulching before sowing with PE-black foil, agro textile-covering plants after planting with agro textile (17 g, a combination of mulching + agro textile. Throughout of all the three years of the trial, it was continuously evidenced that the genotype “Santoro RZ” had the biggest heads and the highest yield (15.33 kg 10 m-2, which leads to conclusion that the yield of lettuce is a genotype characteristics. Moreover, the nutritional value (ascorbic acid concentration has shown that, depending on the method of production, in average, the combination of mulching + agro textile (26.77 mg 100 g-1 had the highest content while the control variant had significantly lower vitamin C content (21.10 mg 100 g-1. The three-year researches have shown that the production method and genotype significantly affect the nitrate content. An average nitrate content was 2196.33 mg kg-1 on the control variant, and 2526.24 mg kg-1 on agro textile. Leafy lettuce of genotyp „Kibou RZ“ had lower nitrate content (2176.85 mg kg-1 compared to „Archimedes RZ“ (2843.05 mg kg-1 and „Santoro RZ“ (2221.37 mg kg-1. However nitrate concentration in all treatments remained within the European Union’s permissible levels.

  12. Combination of inoculation methods of Azospirilum brasilense with broadcasting of nitrogen fertilizer increases corn yield

    Directory of Open Access Journals (Sweden)

    Tânia Maria Müller

    2015-01-01

    Full Text Available Nitrogen (N is the most limiting nutrient for corn production. Thereby, the goal of the paper was to evaluate inoculation methods of Azospirillum brasilense in order to partially supply N required by the crop. The experiment was carried out in Guarapuava, PR, Brasil, in 2011/2012 growing season. Randomized blocks with factorial 3 inoculation methods (seed treatment, planting furrow and non-inoculated control x 5 doses of nitrogen (0, 75, 150, 225 and 300kg ha-1 x 8 replications was used as the experimental design. Leaf are index, foliar nitrogen content, total chlorophyll, grains per ear and yield were evaluated. There was significant interaction between inoculation methods and nitrogen fertilization to leaf area index, but not for yield. Inoculation with the diazotrophic bacteria provided yield increase of 702kg ha-1 for inoculation in seeding furrow and 432kg ha-1 for inoculation in seed treatment compared to the control, but both treatments did not differ between each other. Furthermore, total chlorophyll, grains per ear and yield were positively affected, with quadratic response, by the nitrogen fertilization in broadcasting

  13. Effect of harvest methods on yield and quality of Marketable flowers ...

    African Journals Online (AJOL)

    This study was carried out to determine the effects of harvest methods (proximal and median harvests) on yield and quality of marketable flowers of greenhouse hybrid tea rose (Rosa hybrida L.) cultivars of different growth habits. The cultivar Grant Galla represented cultivars of vigorous growth habit whereas 'Vivaldi' ...

  14. Rhodamine 800 as reference substance for fluorescence quantum yield measurements in deep red emission range

    Energy Technology Data Exchange (ETDEWEB)

    Alessi, A., E-mail: andrea.alessi@eni.com [Centro Ricerche per le Energie non Convenzionali, Istituto eni Donegani, e.n.i. S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Salvalaggio, M. [Centro Ricerche per le Energie non Convenzionali, Istituto eni Donegani, e.n.i. S.p.A., Via G. Fauser 4, 28100 Novara (Italy); Ruzzon, G. [HORIBA Jobin Yvon Srl, Via Cesare Pavese 35/AB, 20090 Opera Milano (Italy)

    2013-02-15

    The determination of fluorescence quantum yields ({Phi}{sub f}) of deep red dyes emitting at 635-900 nm is difficult due to lack of suitable standards. In this work, we propose a commercial dye, rhodamine 800 (Rho800), as reference standard which belongs to the family of xanthenes. The quantum yield of rhodamine 800 in absolute ethanol has been studied using a relative method with cresyl violet (CV) and rhodamine 101 (Rho101) as references, and an absolute fluorometric method by integrating sphere measurements. - Highlights: Black-Right-Pointing-Pointer A red emitting dye Rhodamine 800 was electronic spectroscopy characterized. Black-Right-Pointing-Pointer Its fluorescence quantum yield was studied using a relative and an absolute method. Black-Right-Pointing-Pointer The values found are greater than the values currently known in the literature.

  15. Generating material strength standards of aluminum alloys for research reactors. Pt. 1. Yield strength values Sy and tensile strength values Su

    International Nuclear Information System (INIS)

    Tsuji, H.; Miya, K.

    1995-01-01

    Aluminum alloys are frequently used as structural materials for research reactors. The material strength standards, however, such as the yield strength values (S y ), the tensile strength values (S u ) and the design fatigue curve -which are needed to use aluminum alloys as structural materials in ''design by analysis'' - for those materials have not been determined yet. Hence, a series of material tests was performed and the results were statistically analyzed with the aim of generating these material strength standards. This paper, the first in a series on material strength standards of aluminum alloys, describes the aspects of the tensile properties of the standards. The draft standards were compared with MITI no. 501 as well as with the ASME codes, and the trend of the available data also was examined. It was revealed that the draft proposal could be adopted as the material strength standards, and that the values of the draft standards at and above 150 C for A6061-T6 and A6063-T6 could be applied only to the reactor operating conditions III and IV. Also the draft standards have already been adopted in the Science and Technology Agency regulatory guide (standards for structural design of nuclear research plants). (orig.)

  16. Self-consistent technique for estimating the dynamic yield strength of a shock-loaded material

    International Nuclear Information System (INIS)

    Asay, J.R.; Lipkin, J.

    1978-01-01

    A technique is described for estimating the dynamic yield stress in a shocked material. This method employs reloading and unloading data from a shocked state along with a general assumption of yield and hardening behavior to estimate the yield stress in the precompressed state. No other data are necessary for this evaluation, and, therefore, the method has general applicability at high shock pressures and in materials undergoing phase transitions. In some special cases, it is also possible to estimate the complete state of stress in a shocked state. Using this method, the dynamic yield strength of aluminum at 2.06 GPa has been estimated to be 0.26 GPa. This value agrees reasonably well with previous estimates

  17. Long-term yield effects of establishment method and weed control in willow for short rotation coppice (SRC)

    DEFF Research Database (Denmark)

    Larsen, Søren Ugilt; Jørgensen, Uffe; Kjeldsen, Jens Bonderup

    2014-01-01

    matter (DM) yield was measured over 6 harvest rotations corresponding to 16 years. In 1st rotation, yield differed significantly between establishment methods with highest yield for 1.8 m rods (10.4 Mg ha−1 year−1), intermediate yield for cuttings and 0.2 m billets (8.6 and 8.5 Mg ha−1 year−1...... establishment methods; 1) vertical planting of standard 0.2 m cuttings; 2) horizontal planting of 0.1 m billets; 3) horizontal planting of 0.2 m billets; 4) horizontal planting of 1.8 m rods. All establishment methods were combined with mechanical and chemical weed control during the establishment year. Dry......, respectively) and lowest for 0.1 m billets (5.6 Mg ha−1 year−1). No differences were found in 2nd rotation. Over 1st and 2nd rotation, mechanical weed control resulted in significantly lower yield than chemical control when combined with 0.1 m billets. Cuttings and 1.8 m rods were compared over 1st, 2nd, 3rd...

  18. Determination of the ultimate load in concrete slabs by the yield line finite element method

    International Nuclear Information System (INIS)

    Vaz, L.E.; Feijo, B.; Martha, L.F.R.; Lopes, M.M.

    1984-01-01

    A method for calculating the ultimate load in reinforced concrete slabs is proposed. The method follows the finite element aproach representating the continuum slab as an assembly of rigid triangular plates connected along their sides through yield line elements. This approach leads to the definition of the displacement configuration of the plate only as a function of the transversal displacement at the nodes of the mesh (1 DOF per node) reducing significantly the number of DOF's in relation to the conventional formulation by means of the finite element method (minimum of 3 DOF per node). Nonlinear behaviour of the reinforced concrete section is considered in the definition of the moment rotation curve of the yield lines. The effect of the in plane forces acting in the middle surface of the plate is also taken into account. The validity of the model is verified comparing the numerical solutions with the results of the classical yield line theory. (Author) [pt

  19. Effects of different irrigation methods on pepper yield and soilborne diseases incidence

    Directory of Open Access Journals (Sweden)

    Seral YÜCEL

    2013-12-01

    Full Text Available In this study, the effect of different irrigation strategies and irrigation methods on yields and the incidence of wilt (Fusarium oxysporum and root rot (Fusarium solani and Macrophomina phaseolina diseases causing significant yield losses on field grown processing red pepper is determined. Experiments were carried out at Topçu Station of the Soil and Water Resources Research Institute of Tarsus in 2010 and 2011. Karaisalı processing pepper (Capsicum annuum L. was used in the experiments. Three furrows and five drip irrigation treatments were used in the study. The disease incidence rates were found 8.0-18.2% in furrow irrigation plots and 4.5-10.0% in drip irrigation plots in 2010, while it was 3.4-9.7% in furrow irrigation plots and 2.2-4.5% in drip irrigation plots in 2011. Pepper yields ranged from 3 416 to 4 417 kg da-1 and 3 376 to 4 779 kg da-1 in drip irrigated plots in 2010 and 2011, respectively. However, yields varied between 3 172-3 559 kg da-1 and 2 932-4 150 kg da-1 in furrow irrigated plots in 2010 and 2011 growing seasons.

  20. Yield Gap analysis - Rationale, methods and applications - Introduction to the Special Issue

    NARCIS (Netherlands)

    Ittersum, van M.K.; Cassman, K.G.

    2013-01-01

    Yield gap analysis is an increasingly popular concept. It is a powerful method to reveal and understand the biophysical opportunities to meet the projected increase in demand for agricultural products towards 2050, and to support decision making on research, policies, development and investment that

  1. ENDF/B yield evaluation for 1992: Methods and content

    International Nuclear Information System (INIS)

    England, T.R.; Rider, B.F.

    1992-01-01

    The basic evaluation process, completed in May 1992, for 60 independent, plus corresponding cumulative yield sets is described thirty-six fissioning nuclides at one-or-more neutron fission energies or spontaneous fission are included. The resulting recommended yields include approximately 1200 nuclides per set; these will be slightly extended to encompass all nuclides in the ENDF/B-VI decay files and issued as the second release of ENDF/B-VI yields. All current yield sets in ENDF/B-VI have been reevaluated using ∼3000 new measurements and model parameters for distribution along mass chains. Compiled measurements through 1992 will be included in the documentation of the recommended yields. This paper can only summarize the primary features of the evaluations

  2. Yield, yield components and dry matter digestibility of alfalfa experimental populations

    Directory of Open Access Journals (Sweden)

    Katić Slobodan

    2010-01-01

    Full Text Available Alfalfa is the most important forage crop grown in the temperate regions. It is cultivated for production of vegetative aerial mass used fresh or as hay, and recently as haylage and silage. In many centres worldwide, efforts are made to breed and create new alfalfa cultivars with both higher yields and of higher nutritional value. The aim of this paper was to determine yield and digestibility of 12 experimental populations of alfalfa, and to compare their results to the yields of well-known domestic alfalfa commercial cultivars. The results show significant differences in yield of green forage and dry matter among alfalfa populations, as well as in yield components, height, proportion of leaves in yield and growth rate (tab. 1, 2 and 3. Differences between in vitro digestible dry matter (% and yields of in vitro digestible dry matter (t ha-1 were also significant (tab. 5 and 6. Yield and quality of experimental populations were at the same level or higher than of control cultivars. Synthetic SINUSA exceeded the control cutivars (NS Mediana ZMS V and Banat VS in yield and quality of dry matter. .

  3. REML/BLUP and sequential path analysis in estimating genotypic values and interrelationships among simple maize grain yield-related traits.

    Science.gov (United States)

    Olivoto, T; Nardino, M; Carvalho, I R; Follmann, D N; Ferrari, M; Szareski, V J; de Pelegrin, A J; de Souza, V Q

    2017-03-22

    Methodologies using restricted maximum likelihood/best linear unbiased prediction (REML/BLUP) in combination with sequential path analysis in maize are still limited in the literature. Therefore, the aims of this study were: i) to use REML/BLUP-based procedures in order to estimate variance components, genetic parameters, and genotypic values of simple maize hybrids, and ii) to fit stepwise regressions considering genotypic values to form a path diagram with multi-order predictors and minimum multicollinearity that explains the relationships of cause and effect among grain yield-related traits. Fifteen commercial simple maize hybrids were evaluated in multi-environment trials in a randomized complete block design with four replications. The environmental variance (78.80%) and genotype-vs-environment variance (20.83%) accounted for more than 99% of the phenotypic variance of grain yield, which difficult the direct selection of breeders for this trait. The sequential path analysis model allowed the selection of traits with high explanatory power and minimum multicollinearity, resulting in models with elevated fit (R 2 > 0.9 and ε analysis is effective in the evaluation of maize-breeding trials.

  4. Cumulative fission yield of Ce-148 produced by thermal-neutron fission of U-235

    International Nuclear Information System (INIS)

    Hasan, A.A.

    1984-12-01

    Cumulative fission yield of 148 cesium isotopes and some other fission products produced by thermal-neutron fission of 235 uranium is determined by Germanium/Lithium spectroscopic methods. The measuremets were done at Tsing-Hua open pool reactor using 3 to 4 mg of 93.15% enriched 235 uranium samples. Gamma rays are assigned to the responsible fission products by matching gamma rays energies and half lives. Fission rate is calculated by fission track method. Cumulative fission yields of 148 cesium, 90 krypton, 130 iodine, 144 lanthanum, 89 krypton, 136 xenon, 137 xenon and 140 cesium are calculated. This values are compared with previously predicted values and showed good agreement. 21 Ref

  5. Methods of valuing air pollution and estimated monetary values of air pollutants in various U.S. regions

    Energy Technology Data Exchange (ETDEWEB)

    Wang, M.Q.; Santini, D.J.; Warinner, S.A.

    1994-12-01

    Air pollutant emission values are used to determine the social costs of various technologies that cause air pollution and to estimate the benefits of emission control technologies. In this report, the authors present two methods of estimating air pollutant emission values--the damage value method and the control cost method--and review 15 recent studies in which these methods were employed to estimate emission values. The reviewed studies derived emission values for only a limited number of areas; emission value estimates are needed for other US regions. Using the emission values estimated in the reviewed studies, they establish regression relationships between emission values, air pollutant concentrations, and total population exposed, and apply the established relationships to 17 US metropolitan areas to estimate damage-based and control-cost-based emission values for reactive organic gases, nitrogen oxides, particulate matter measuring less than 10 microns, sulfur oxides, and carbon monoxide in these areas. Their estimates show significant variations in emission values across the 17 regions.

  6. Optimization of MR fluid Yield stress using Taguchi Method and Response Surface Methodology Techniques

    Science.gov (United States)

    Mangal, S. K.; Sharma, Vivek

    2018-02-01

    Magneto rheological fluids belong to a class of smart materials whose rheological characteristics such as yield stress, viscosity etc. changes in the presence of applied magnetic field. In this paper, optimization of MR fluid constituents is obtained with on-state yield stress as response parameter. For this, 18 samples of MR fluids are prepared using L-18 Orthogonal Array. These samples are experimentally tested on a developed & fabricated electromagnet setup. It has been found that the yield stress of MR fluid mainly depends on the volume fraction of the iron particles and type of carrier fluid used in it. The optimal combination of the input parameters for the fluid are found to be as Mineral oil with a volume percentage of 67%, iron powder of 300 mesh size with a volume percentage of 32%, oleic acid with a volume percentage of 0.5% and tetra-methyl-ammonium-hydroxide with a volume percentage of 0.7%. This optimal combination of input parameters has given the on-state yield stress as 48.197 kPa numerically. An experimental confirmation test on the optimized MR fluid sample has been then carried out and the response parameter thus obtained has found matching quite well (less than 1% error) with the numerically obtained values.

  7. The effects of planting methods and head pruning on seed yield and yield components of medicinal pumpkin (Cucurbita pepo subsp. Pepo convar. Pepo var. styriaca) at low temperature areas.

    Science.gov (United States)

    Bahrami, R Nikkhah; Khodadadi, M; Pirivatlo, S Piry; Hassanpanah, D

    2009-03-15

    This experiment carried out to evaluate the effects of planting methods (seed sowing and transplanting) and head pruning (no pruning, pruning after 12th node and pruning after 16th node) on yield and yield components such as number of branches (sub-branches) per plant, fruits per plant, growth, fruit size, weight of fresh fruit, weight of seeds per fruit, number of seeds per fruit and seed yield of medicinal pumpkin. The experiment was carried out based of factorial experiment with Randomized Completely Blocks Design (RCBD) by three replications in Ardabil Agricultural and Natural Resources Researches Station at 2007. Seedlings were grown in heated greenhouse. When the climatic condition became suitable and seedlings were at the four leaves stage, both seeds and seedlings were planted at the same time in the farm. Maintenance operations were done during the growth season. Head pruning treatments were done the forecast time. The results showed that the planting methods had significant effect on the number of ripen fruits per plant, fruits diameter, weight of seeds per fruit, weight of 1000 seeds and seed yield and had no significant effect on the other traits. Also the results indicated that head pruning treatments had significant effects on the number of branches per plant, growth and seed yield and no significant on the other traits. In this experiment the most seed yield (997.8 kg ha(-1)) obtained from transplanting method with head pruning after 12th node and the least seed yield obtained from control.

  8. Yields, market values and n use efficiency (15n) in flue-cured tobacco influenced by basal fertilization time and n fertilizer

    International Nuclear Information System (INIS)

    Xie Zhijian; Tu Shuxin; Li Jinping; Chen Zhenguo; Xu Rubing; Cao Shiming; Li Jianping; Wang Xuelong; Chen Liangcun; Guo Li; Cao Xianglian; Hu Gongjun; Zhang Yunzheng

    2010-01-01

    A field experiment with 15 N isotope tracing micro-plots was carried out to study the effects of basal N fertilizer application time (0 d, 15 d, 30 d before the transplanting) on the yields, market values and N uptake, utilization and distribution in different organs of flue-cured tobacco (FCT) in two ecological tobacco production areas Zhaojiashan (N 31 degree 28', E 111 degree 15', 903 m above sea level) and Laowan (N 31 degree 27', E 111 degree 14', 1 130 m above sea level)] of Xiangfan city, Hubei province. The results showed that supplying N fertilizer significantly increased the yields and market values of FCT by 13%-40% and 14%-35% for the experimental site of Zhaojiashan (lower altitude ) and Laowan (higher altitude), respectively. Compared to applying basal fertilizer at 0 d before transplanting, applying basal fertilizer at 15-30 d before transplanting increased the market values by 10%-30% (P<0.05). And early application of basal N fertilizer (30 d before transplanting) increased N accumulation by 8%-26% as compared with that of applying basal N fertilizer at 0 d or 15 d before transplanting in the two ecological areas. There was no significant effects of basal N application time on N fertilizer efficiency in lower altitude site, but increasing by 3%-6% in higher altitude site. The proportion of fertilizer N to total N in FCT decreased by 8%-32% in lower altitude, but increased by 25%-32% in higher altitude when basal N fertilizer was supplied at 30d before transplanting., These results indicated that properly earlier supplication of basal N fertilizer could improve the N fertilizer efficiency, and thus increase the yields and market values of FCT, especially in higher altitude areas with less sunshine and lower temperature. (authors)

  9. Delayed neutron yield from fast neutron induced fission of 238U

    International Nuclear Information System (INIS)

    Piksaikin, V.M.; Kazakov, L.E.; Isaev, S.G.; Roshchenko, V.A.; Goverdovski, A.A.; Tertytchnyi, R.G.

    2002-01-01

    The measurements of the total delayed neutron yield from fast neutron induced fission of 238 U were made. The experimental method based on the periodic irradiation of the fissionable sample by neutrons from a suitable nuclear reaction had been employed. The preliminary results on the energy dependence of the total delayed neutron yield from fission of 238 U are obtained. According to the comparison of experimental data with our prediction based on correlation properties of delayed neutron characteristics, it is concluded that the value of the total delayed neutron yield near the threshold of (n,f) reaction is not a constant. (author)

  10. EFFECT OF SOWING DATE AND WEED CONTROL METHOD ON THE GROWTH AND YIELD OF SOYBEAN

    Directory of Open Access Journals (Sweden)

    Nasrin Akter

    2016-06-01

    Full Text Available Sowing date and weed management play a significant role in determining soybean growth, development and seed yield. Results showed that different sowing date and weed control methods had significant effect on relative weed density, weed biomass, weed control efficiency, plant height, dry weight plant-1 and seed yield of soybean. Among the infested weed species in the experimental field the dominant weeds were Lindernia procumbens (44.78%, Echinochloa colonum (26.39% and Cynodon dactylon (16.30%. The results also revealed that early sowing (2 January brought about the highest seed yield (2.17 t ha-1 and sowing delay (1 February resulted in the lowest yield (1.64 t ha-1. Two times hand weeding (20 and 40 DAS controlled the weeds most effectively and led to highest seed yield (2.23 t ha-1 which was statistically similar (2.19 t ha-1 with herbicide application. Combination effect showed that the highest seed yield (2.50 t ha-1 was obtained from 2 January sowing when the crop was weeded by hand at 20 and 40 DAS.

  11. Similar estimates of temperature impacts on global wheat yield by three independent methods

    NARCIS (Netherlands)

    Liu, Bing; Asseng, Senthold; Müller, Christoph; Ewert, Frank; Elliott, Joshua; Lobell, David B.; Martre, Pierre; Ruane, Alex C.; Wallach, Daniel; Jones, James W.; Supit, Iwan; Wolf, Joost

    2016-01-01

    The potential impact of global temperature change on global crop yield has recently been assessed with different methods. Here we show that grid-based and point-based simulations and statistical regressions (from historic records), without deliberate adaptation or CO 2 fertilization effects,

  12. Yield Estimation of Sugar Beet Based on Plant Canopy Using Machine Vision Methods

    Directory of Open Access Journals (Sweden)

    S Latifaltojar

    2014-09-01

    Full Text Available Crop yield estimation is one of the most important parameters for information and resources management in precision agriculture. This information is employed for optimizing the field inputs for successive cultivations. In the present study, the feasibility of sugar beet yield estimation by means of machine vision was studied. For the field experiments stripped images were taken during the growth season with one month intervals. The image of horizontal view of plants canopy was prepared at the end of each month. At the end of growth season, beet roots were harvested and the correlation between the sugar beet canopy in each month of growth period and corresponding weight of the roots were investigated. Results showed that there was a strong correlation between the beet yield and green surface area of autumn cultivated sugar beets. The highest coefficient of determination was 0.85 at three months before harvest. In order to assess the accuracy of the final model, the second year of study was performed with the same methodology. The results depicted a strong relationship between the actual and estimated beet weights with R2=0.94. The model estimated beet yield with about 9 percent relative error. It is concluded that this method has appropriate potential for estimation of sugar beet yield based on band imaging prior to harvest

  13. Estimation of effects of photosynthesis response functions on rice yields and seasonal variation of CO2 fixation using a photosynthesis-sterility type of crop yield model

    International Nuclear Information System (INIS)

    Kaneko, D.; Moriwaki, Y.

    2008-01-01

    This study presents a crop production model improvement: the previously adopted Michaelis-Menten (MM) type photosynthesis response function (fsub(rad-MM)) was replaced with a Prioul-Chartier (PC) type function (fsub(rad-PC)). The authors' analysis reflects concerns regarding the background effect of global warming, under simultaneous conditions of high air temperature and strong solar radiation. The MM type function fsub(rad-MM) can give excessive values leading to an overestimate of photosynthesis rate (PSN) and grain yield for paddy-rice. The MM model is applicable to many plants whose (PSN) increases concomitant with increased insolation: wheat, maize, soybean, etc. For paddy rice, the PSN apparently shows a maximum PSN. This paper proves that the MM model overestimated the PSN for paddy rice for sufficient solar radiation: the PSN using the PC model yields 10% lower values. However, the unit crop production index (CPIsub(U)) is almost independent of the MM and PC models because of respective standardization of both PSN and crop production index using average PSNsub(0) and CPIsub(0). The authors improved the estimation method using a photosynthesis-and-sterility based crop situation index (CSIsub(E)) to produce a crop yield index (CYIsub(E)), which is used to estimate rice yields in place of the crop situation index (CSI); the CSI gives a percentage of rice yields compared to normal annual production. The model calculates PSN including biomass effects, low-temperature sterility, and high-temperature injury by incorporating insolation, effective air temperature, the normalized difference vegetation index (NDVI), and effects of temperature on photosynthesis. Based on routine observation data, the method enables automated crop-production monitoring in remote regions without special observations. This method can quantify grain production early to raise an alarm in Southeast Asian countries, which must confront climate fluctuation through this era of global

  14. Predicting paddlefish roe yields using an extension of the Beverton–Holt equilibrium yield-per-recruit model

    Science.gov (United States)

    Colvin, M.E.; Bettoli, Phillip William; Scholten, G.D.

    2013-01-01

    Equilibrium yield models predict the total biomass removed from an exploited stock; however, traditional yield models must be modified to simulate roe yields because a linear relationship between age (or length) and mature ovary weight does not typically exist. We extended the traditional Beverton-Holt equilibrium yield model to predict roe yields of Paddlefish Polyodon spathula in Kentucky Lake, Tennessee-Kentucky, as a function of varying conditional fishing mortality rates (10-70%), conditional natural mortality rates (cm; 9% and 18%), and four minimum size limits ranging from 864 to 1,016mm eye-to-fork length. These results were then compared to a biomass-based yield assessment. Analysis of roe yields indicated the potential for growth overfishing at lower exploitation rates and smaller minimum length limits than were suggested by the biomass-based assessment. Patterns of biomass and roe yields in relation to exploitation rates were similar regardless of the simulated value of cm, thus indicating that the results were insensitive to changes in cm. Our results also suggested that higher minimum length limits would increase roe yield and reduce the potential for growth overfishing and recruitment overfishing at the simulated cm values. Biomass-based equilibrium yield assessments are commonly used to assess the effects of harvest on other caviar-based fisheries; however, our analysis demonstrates that such assessments likely underestimate the probability and severity of growth overfishing when roe is targeted. Therefore, equilibrium roe yield-per-recruit models should also be considered to guide the management process for caviar-producing fish species.

  15. Determining the Threshold Value of Basil Yield Reduction and Evaluation of Water Uptake Models under Salinity Stress Condition

    OpenAIRE

    M. Sarai Tabrizi; H. Babazadeh; M. Homaee; F. Kaveh Kaveh; M. Parsinejad

    2016-01-01

    Introduction: Several mathematical models are being used for assessing the plant response to the salinity of the root zone. The salinity of the soil and water resources is a major challenge for agricultural sector in Iran. Several mathematical models have been developed for plant responses to the salinity stress. However, these models are often applicable in particular conditions. The objectives of this study were to evaluate the threshold value of Basil yield reduction, modeling Basil respon...

  16. modelling relationship between rainfall variability and yields

    African Journals Online (AJOL)

    , S. and ... factors to rice yield. Adebayo and Adebayo (1997) developed double log multiple regression model to predict rice yield in Adamawa State, Nigeria. The general form of .... the second are the crop yield/values for millet and sorghum ...

  17. Humans as Sensors: Assessing the Information Value of Qualitative Farmer's Crop Condition Surveys for Crop Yield Monitoring and Forecasting

    Science.gov (United States)

    Beguería, S.

    2017-12-01

    While large efforts are devoted to developing crop status monitoring and yield forecasting systems trough the use of Earth observation data (mostly remotely sensed satellite imagery) and observational and modeled weather data, here we focus on the information value of qualitative data on crop status from direct observations made by humans. This kind of data has a high value as it reflects the expert opinion of individuals directly involved in the development of the crop. However, they have issues that prevent their direct use in crop monitoring and yield forecasting systems, such as their non-spatially explicit nature, or most importantly their qualitative nature. Indeed, while the human brain is good at categorizing the status of physical systems in terms of qualitative scales (`very good', `good', `fair', etcetera), it has difficulties in quantifying it in physical units. This has prevented the incorporation of this kind of data into systems that make extensive use of numerical information. Here we show an example of using qualitative crop condition data to estimate yields of the most important crops in the US early in the season. We use USDA weekly crop condition reports, which are based on a sample of thousands of reporters including mostly farmers and people in direct contact with them. These reporters provide subjective evaluations of crop conditions, in a scale including five levels ranging from `very poor' to `excellent'. The USDA report indicates, for each state, the proportion of reporters fort each condition level. We show how is it possible to model the underlying non-observed quantitative variable that reflects the crop status on each state, and how this model is consistent across states and years. Furthermore, we show how this information can be used to monitor the status of the crops and to produce yield forecasts early in the season. Finally, we discuss approaches for blending this information source with other, more classical earth data sources

  18. The influence of the plantation establishment method on the yield of marshmallow (Althaea officinalis L. flowers

    Directory of Open Access Journals (Sweden)

    Sylwia Andruszczak

    2012-12-01

    Full Text Available The field experiment with one- and two-year-old marshmallow plants was carried out in Zamość on brown soil of loess origin in 2002-2004. There were four methods of plantation establishment: 1 direct sowing in the field (control object; 2 direct sowing in the field with cover of polypropylene sheet; 3 by seedlings from a plastic house; 4 by seedlings produced in multi-cell propagation trays. It was found that, in the case of one-year-old plants, all the methods of plantation establishment significantly increased the yield and the number of marshmallow flowers, as compared to the control object, but the best results were obtained when the plants were propagated from seedlings produced in multi-cell trays. Taking into account the two-year-old plants, no significant impact of the plantation establishment method on flower yield was found. On average, total yields of flowers varied from 17.2 dt×ha-1 in the first year of vegetation to 27.8 dt×ha-1 in the case of the two-year-old plants.

  19. An image based method for crop yield prediction using remotely sensed and crop canopy data: the case of Paphos district, western Cyprus

    Science.gov (United States)

    Papadavid, G.; Hadjimitsis, D.

    2014-08-01

    Remote sensing techniques development have provided the opportunity for optimizing yields in the agricultural procedure and moreover to predict the forthcoming yield. Yield prediction plays a vital role in Agricultural Policy and provides useful data to policy makers. In this context, crop and soil parameters along with NDVI index which are valuable sources of information have been elaborated statistically to test if a) Durum wheat yield can be predicted and b) when is the actual time-window to predict the yield in the district of Paphos, where Durum wheat is the basic cultivation and supports the rural economy of the area. 15 plots cultivated with Durum wheat from the Agricultural Research Institute of Cyprus for research purposes, in the area of interest, have been under observation for three years to derive the necessary data. Statistical and remote sensing techniques were then applied to derive and map a model that can predict yield of Durum wheat in this area. Indeed the semi-empirical model developed for this purpose, with very high correlation coefficient R2=0.886, has shown in practice that can predict yields very good. Students T test has revealed that predicted values and real values of yield have no statistically significant difference. The developed model can and will be further elaborated with more parameters and applied for other crops in the near future.

  20. MODELING OF YIELD AND QUALITY OF TABLE ROOT CROPS WITH THE USE OF DIFFERENT AGROTECHNICAL METHODS

    Directory of Open Access Journals (Sweden)

    S. M. Nadezhkin

    2017-01-01

    Full Text Available The effects of different fertilizer rates, irrigation, sowing rate for carrot and red beet were studied in the field condition in food-hills zone of Chechen Republic. The use of N40-80P40-80K40-80 caused the increase in yield from 22.8 to 30.8-33.2 t/ha or by 35-46%, when cultivating a carrot crop. Under irrigation the yield increases by 30-33%. Application of N40P40K40 and maintenance of soil moisture at 70% of moisture rate provoked the improvement in value, market and biochemical characteristics of roots; where the increased contents of dry matter, total sugar and vitamins were observed. The mathematical modeling for the process of yielding abilities and root quality in carrot and red beet showed that highest productivity can be achieved on chernozem soil at Central Pre-Caucasus zone when the level of mineral plant nutrition was N40-60P40-60K40-60. The further increment in fertilizer doses does not bring an improvement to yields and leads to decrease in quality of yields. The increased level of antecedent soil water moisture 70-75% of moisture rates does not raise the yield, on the contrary decreasing at the same time the root quality. The use of mathematical modeling enables to rationally define the fertilizer rates depending on application of irrigation and sowing rates in cultivation of carrot and red beet.

  1. Some lemma on spectrum of eigen value regarding power method

    Science.gov (United States)

    Jamali, A. R. M. Jalal Uddin; Alam, Md. Sah

    2017-04-01

    Eigen value problems arise in almost all science and engineering fields. There exist some smart methods in literature in which most of them are able to find only Eigen values but could not find corresponding Eigen vectors. There exist many engineering as well as scientific fields in which both largest as well as smallest Eigen pairs are required. Power method is very simple but a powerful tool for finding largest Eigen value and corresponding Eigen vector (Eigen-pair). Again Inverse Power method is applied to find out smallest Eigen-pair and/or desire Eigen-pairs. But it is known that Inverse Power method is computationally very costly. On the other hand by using shifting property, Power method can find further Eigen-pairs. But the position of this Eigen value in the set of spectrum of the Eigen values is not identified. In this regard we proposed four lemma associate with Modified Power method. Each Lemma is proved ornately. The Modified Power method is implemented and illustrates an example for the verification of the Lemma. By using lemma the modified power algorithm is able to find out both largest and smallest Eigen-pairs successfully and efficiently in some cases. Moreover by the help of the Lemma, algorithm is able to detect the nature (positive and negative) of the Eigen values.

  2. Determination of the alcohol-yielding capacity of cereals. A method for the determination of the alcohol-yielding capacity

    Energy Technology Data Exchange (ETDEWEB)

    Frey, A; Hoppe, W

    1957-01-01

    A laboratory method is reported for the determination of the alcohol yielding capacity of starch-containing distillery raw materials. The starch is inverted with dilute HCl under pressure, after which the material is fermented with yeast at pH 5.4. After distillation, the alcohol is determined pyknometrically. The influence of such factors as amount of yeast was determined experimentally. Analysis of the time curves for the hydrolysis of starch (by paper-chromatographic techniques) in relation to pH showed glucose to be the principal reaction product, with only slight amounts of maltose and higher sugars being formed.

  3. Weed-crop competition effects on growth and yield of sugarcane planted using two methods

    International Nuclear Information System (INIS)

    Zafar, M.; Tanveer, A.; Cheema, Z.A.; Ashraf, M.

    2010-01-01

    Effect of planting techniques and weed-crop competition periods on yield potential of spring planted sugarcane variety HSF-240 was studied at the Ayub Agricultural Research Institute, Faisalabad, Pakistan. The experiment was laid out in RCBD with a split-plot arrangement, with four replications and net plot size of 3.6m x 10m. In the experiment, two planting techniques viz., 60 cm apart rows in flat sowing technique and 120 cm apart rows in trench sowing technique were randomized in main plots. Seven weed-crop competition periods viz., Zero (weed free), weed-crop competition for 45, 60, 75, 90, 105 days after sowing (DAS) and weedy check (full season weed-crop competition) were randomized in sub-plots. Sugarcane sown by trench method exhibited more leaf area index (LAI), average crop growth rate (ACGR) and yield contributing attributes. Trench sowing by yielding 72.22 and 75.08 t ha/sup -1/ stripped cane yields, significantly showed superiority over the flat sowing, which gave 64.13 and 66.04 t ha/sup -1/ stripped cane yields in 2005-06 and 2006- 07, respectively. Generally, there was an increase in weed population and biomass but decrease in leaf area index, crop growth rate and yield components with an increase in weed-crop competition period. A decrease of 10.06, 17.90, 22.42, 28.65, 37.64 and 56.89% in stripped cane yield was observed for weed-crop competition periods of 45, 60, 75, 90, 105 DAS and weedy check as compared with zero competition in 2005-06, respectively. In 2006-07, the respective decrease in stripped cane yield was 9.84, 18.76, 22.92, 27.98, 38.75, and 54.98%. Trench sowing at 1.2 m row spacing proved better sowing technique and 45 DAS was the critical period of weed-crop competition. (author)

  4. Modelling of the process yields of a whey fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Blakebrough, N; Moresi, M

    1981-01-01

    The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (kla) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulfite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (kla) and the values of y and eta were correlated only with temperature, lactose level and kla, since these variables were approximately orthogonal. The validity of this model was finally checked against the yields reported by Wasserman et al. (1961) in a 6-cubic metre fermenter, thus confirming the capability of the model to provide a reliable basis for further scale-up on the production scale. (Refs. 17).

  5. Pyrolysis of Lantana camara and Mimosa pigra: Influences of temperature, other process parameters and incondensable gas evolution on char yield and higher heating value.

    Science.gov (United States)

    Mundike, Jhonnah; Collard, François-Xavier; Görgens, Johann F

    2017-11-01

    Pyrolysis of invasive non-indigenous plants, Lantana camara (LC) and Mimosa pigra (MP) was conducted at milligram-scale for optimisation of temperature, heating rate and hold time on char yield and higher heating value (HHV). The impact of scaling-up to gram-scale was also studied, with chromatography used to correlate gas composition with HHV evolution. Statistically significant effects of temperature on char yield and HHV were obtained, while heating rate and hold time effects were insignificant. Milligram-scale maximised HHVs were 30.03MJkg -1 (525°C) and 31.01MJkg -1 (580°C) for LC and MP, respectively. Higher char yields and HHVs for MP were attributed to increased lignin content. Scaling-up promoted secondary char formation thereby increasing HHVs, 30.82MJkg -1 for LC and 31.61MJkg -1 for MP. Incondensable gas analysis showed that temperature increase beyond preferred values caused dehydrogenation that decreased HHV. Similarly, CO evolution profile explained differences in optimal HHV temperatures. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Influence of Plant Growth Regulators (PGRs and Planting Method on Growth and Yield in Oil Pumpkin (Cucurbita pepo var. styriaca

    Directory of Open Access Journals (Sweden)

    Shirzad SURE

    2012-05-01

    Full Text Available The effect of plant growth regulators IBA (indole butyric acid, GA3 (gibberellin and ethylene (as ethephon in two methods of planting was investigated (each method was considered as a separate experiment on morphological characters and yield of medicinal pumpkin. The experiments were carried out in a factorial trial based on completely randomized block design, with four replicates. The treatments were combined with priming and spraying with the above PGRs. The first seed priming with control (water, IBA 100 ppm, GA3 25 ppm and ethephon 200 ppm, and when seedling developed to 4 leaf stage sprayed there with control (water, IBA 100 ppm, GA3 25 ppm and ethephon 200 ppm for three times. In both planting methods, there were all of these treatments. The result showed that PGRs and planting method had significant effects on vegetative, flowering and yield characteristics including: leaf area %DM plant, number of male and female flowers per plant, number of fruit/plant, fruits fresh weight, seeds length and width, number of seed per fruit, seed yield, % seeds oil and oil yield. Hence spraying with GA3 25 ppm in four leaf stage at trellis method could be a suitable treatment for enhancing growth and yield of medicinal pumpkin.

  7. Measurements of periods, relative abundances and absolute yields of delayed neutrons from fast neutron induced fission of {sup 237}Np

    Energy Technology Data Exchange (ETDEWEB)

    Piksaikine, V. [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

    1997-03-01

    The experimental method for measurements of the delayed neutron yields and period is presented. The preliminary results of the total yield, relative abundances and periods are shown comparing with the previously reported values. (J.P.N.)

  8. Influence of Extraction Methods on the Yield of Steviol Glycosides and Antioxidants in Stevia rebaudiana Extracts.

    Science.gov (United States)

    Periche, Angela; Castelló, Maria Luisa; Heredia, Ana; Escriche, Isabel

    2015-06-01

    This study evaluated the application of ultrasound techniques and microwave energy, compared to conventional extraction methods (high temperatures at atmospheric pressure), for the solid-liquid extraction of steviol glycosides (sweeteners) and antioxidants (total phenols, flavonoids and antioxidant capacity) from dehydrated Stevia leaves. Different temperatures (from 50 to 100 °C), times (from 1 to 40 min) and microwave powers (1.98 and 3.30 W/g extract) were used. There was a great difference in the resulting yields according to the treatments applied. Steviol glycosides and antioxidants were negatively correlated; therefore, there is no single treatment suitable for obtaining the highest yield in both groups of compounds simultaneously. The greatest yield of steviol glycosides was obtained with microwave energy (3.30 W/g extract, 2 min), whereas, the conventional method (90 °C, 1 min) was the most suitable for antioxidant extraction. Consequently, the best process depends on the subsequent use (sweetener or antioxidant) of the aqueous extract of Stevia leaves.

  9. Different methods of measuring ADC values in normal human brain

    International Nuclear Information System (INIS)

    Wei Youping; Sheng Junkang; Zhang Caiyuan

    2009-01-01

    Objective: To investigate better method of measuring ADC values of normal brain, and provide reference for further research. Methods: Twenty healthy people's MR imaging were reviewed. All of them underwent routine MRI scans and echo-planar diffusion-weighted imaging (DWI), and ADC maps were reconstructed on work station. Six regions of interest (ROI) were selected for each object, the mean ADC values were obtained for each position on DWI and ADC maps respectively. Results: On the anisotropic DWI map calculated in the hypothalamus, ADC M , ADC P , ADC S values were no significant difference (P>0.05), in the frontal white matter and internal capsule hindlimb, there was a significant difference (P ave value exist significant difference to direct measurement on the anisotropic (isotropic) ADC map (P<0.001). Conclusion: Diffusion of water in the frontal white matter and internal capsule are anisotropic, but it is isotropic in the hypothalamus; different quantitative methods of diffusion measurement of 4ADC values have significant difference, but ADC values calculated through the DWI map is more accurate, quantitative diffusion study of brain tissue should also consider the diffusion measurement method. (authors)

  10. Ionization yield from electron tracks in liquid xenon

    International Nuclear Information System (INIS)

    Voronova, T.Ya.; Kipsanov, M.A.; Kruglov, A.A.; Obodovskij, I.M.; Pokachalov, S.G.; Shilov, V.A.; Khristich, E.B.

    1989-01-01

    Methods for calculating coefficients K β , characterizing ionization yield from electron track in liquid xenon are considered. K β calculation is conducted on the base of experimental data on K parameter characterizing ionization yield from a certain combination of photo-, Compton-and Auger electron tracks. K parameter measurements are conducted in liquid xenon at 170 K temperature within 10-30 keV gamma- and X radiation energy ranges. Calculated dependence of K β and K coefficients on the energy in a wide (5-500 keV) range is presented. K β values obtained can be applied for calculating the energy resolution of a gamma-spectrometer and linearity of its calibration characteristics if the electric field intensity in the spectrometer does not exceed some kV/cm

  11. Modelling of the process yields of a whey fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Blakebrough, N; Moresi, M

    1981-09-01

    The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (ksub(L)a) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulphite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (ksub(L)a) and the values of y and eta were correlated only with temperature, lactose level and ksub(L)a since these variables were approximately orthogonal.

  12. Using an integrated method to estimate watershed sediment yield during heavy rain period: a case study in Hualien County, Taiwan

    Directory of Open Access Journals (Sweden)

    S. M. Hsu

    2012-06-01

    Full Text Available A comprehensive approach estimating sediment yield from a watershed is needed to develop better measures for mitigating sediment disasters and assessing downstream impacts. In the present study, an attempt has been made to develop an integrated method, considering sediment supplies associated with soil erosion, shallow landslide and debris flow to estimate sediment yield from a debris-flow-prone watershed on a storm event basis. The integrated method is based on the HSPF and TRIGRS models for predicting soil erosion and shallow landslide sediment yield, and the FLO-2D model for calculating debris flow sediment yield. The proposed method was applied to potential debris-flow watersheds located in the Sioulin Township of Hualien County. The available data such as hourly rainfall data, historical streamflow and sediment records as well as event-based landslide inventory maps have been used for model calibration and validation. Results for simulating sediment yield have been confirmed by comparisons of observed data from several typhoon events. The verified method employed a 24-h design hyetograph with the 100-yr return period to simulate sediment yield within the study area. The results revealed that the influence of shallow landslides on sediment supply as compared with soil erosion was significant. The estimate of landslide transport capacity into a main channel indicated the sediment delivery ratio on a typhoon event basis was approximately 38.4%. In addition, a comparison of sediment yields computed from occurrence and non-occurrence of debris flow scenarios showed that the sediment yield from an occurrence condition was found to be increasing at about 14.2 times more than estimated under a non-occurrence condition. This implied watershed sediment hazard induced by debris flow may cause severe consequences.

  13. Sediment yield estimation in mountain catchments of the Camastra reservoir, southern Italy: a comparison among different empirical methods

    Science.gov (United States)

    Lazzari, Maurizio; Danese, Maria; Gioia, Dario; Piccarreta, Marco

    2013-04-01

    Sedimentary budget estimation is an important topic for both scientific and social community, because it is crucial to understand both dynamics of orogenic belts and many practical problems, such as soil conservation and sediment accumulation in reservoir. Estimations of sediment yield or denudation rates in southern-central Italy are generally obtained by simple empirical relationships based on statistical regression between geomorphic parameters of the drainage network and the measured suspended sediment yield at the outlet of several drainage basins or through the use of models based on sediment delivery ratio or on soil loss equations. In this work, we perform a study of catchment dynamics and an estimation of sedimentary yield for several mountain catchments of the central-western sector of the Basilicata region, southern Italy. Sediment yield estimation has been obtained through both an indirect estimation of suspended sediment yield based on the Tu index (mean annual suspension sediment yield, Ciccacci et al., 1980) and the application of the Rusle (Renard et al., 1997) and the USPED (Mitasova et al., 1996) empirical methods. The preliminary results indicate a reliable difference between the RUSLE and USPED methods and the estimation based on the Tu index; a critical data analysis of results has been carried out considering also the present-day spatial distribution of erosion, transport and depositional processes in relation to the maps obtained from the application of those different empirical methods. The studied catchments drain an artificial reservoir (i.e. the Camastra dam), where a detailed evaluation of the amount of historical sediment storage has been collected. Sediment yield estimation obtained by means of the empirical methods have been compared and checked with historical data of sediment accumulation measured in the artificial reservoir of the Camastra dam. The validation of such estimations of sediment yield at the scale of large catchments

  14. Determination of yields of gaseous products of carbohydrates radiolysis by mass spectrometry method

    International Nuclear Information System (INIS)

    Ivko, A.A.; Gol'din, S.I.; Bondarenko, N.T.; Markevich, S.V.; Sharpatyj, V.A.

    1977-01-01

    Possible complications are treated involved in the mass spectral study of the radiolytic products of deuterated carbohydrates. A method is proposed suitable for the evaluation of hydrogen isotopes relations and the content of deuterium in water. It has been possible to identify the major gaseous radiolytic products of glucose, polyglucan and dextran, and also to assess their radiation-chemical yields [ru

  15. Sputtering yield calculation for binary target

    International Nuclear Information System (INIS)

    Jimenez-Rodriguez, J.J.; Rodriguez-Vidal, M.; Valles-Abarca, J.A.

    1979-01-01

    The generalization for binary targets, of the ideas proposed by Sigmund for monoatomic targets, leads to a set of coupled intergrodifferential equations for the sputtering functions. After moment decomposition, the final formulae are obtained by the standard method based on the Laplace Transform, where the inverse transform is made with the aid of asymptotic expansions in the limit of very high projectile energy as compared to the surface binding energy. The possible loss of stoichiometry for binary targets is analyzed. Comparison of computed values of sputtering yield for normal incidence, with experimental results shows good agreement. (author)

  16. Evaluation of Yield, Yield Components and Essential Oil Content of Marigold (Calendula officinalis L. with the Use of Nitrogen and Vermicompost

    Directory of Open Access Journals (Sweden)

    Alireza Pazoki

    2016-10-01

    Full Text Available Environmenal problems resulting from application of nitrogen fertilizers in the production plant materials led agricultural specialists to use clean and alternative methods to towards the organic farming and use of organic fertilizers. In this study, thus, the effect of nitrogen and vermicompost fertilizer rates on yield, yield components, essential oil content and some morphological traits of marigold was studied in a split plot experiment based on completely randomized blocks design with 3 replications in Shahr-e-Rey region during 2013 growing season. Nitrogen rates with 3 levels (0, 60, 120 and 180 kg.ha-1 were assigned to main plots and vermicompost with 3 levels (0, 10, and 20 t.ha-1 to the sub plots. Mean comparison of simple effects indicated that the plants treated with 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 organic fertilizer vermicompost produced higher trait values under study than control (non application of vermincompost. Interaction effect of experimented factors was significant on all traits under evaluation. Thus, highest seed yield (1567 kg.ha-1, biological yield (6664 kg.ha-1 and essential oil yield (8.85 kg.ha-1 obtained by the application of 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 varmicompost. Based on the results obtained it could be said that nitrogen and vermicompost may improve seed and biological yield and yield components of marigold.

  17. Quantum yields and mechanism in TiO[sub 2] mediated photocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Lizhong

    1994-01-01

    The photocatalytic pathway in TiO[sub 2] suspensions was examined using a spin trap/electron paramagnetic resonance spectroscopy technique within a competition kinetic scheme. Experimental results from competition reactions show that there is a marked difference in kinetic behaviors between the systems with (heterogeneous) and without (homogeneous) TiO[sub 2] suspension, confirming that the reaction pathway of OH- radicals in the TiO[sub 2] suspension is at least partly heterogeneous. A photocatalytic mechanism is proposed. A method of determining the trapping efficiency of OH- radicals was developed, using the spin trap DMPO (5,5-dimethyl-1-pyrroline N-oxide), for measuring growth rates of the spin adduct DMPO-OH and high pressure liquid chromatography for measuring the OH- radical generation rates. The reliability of the measurement method was confirmed by comparison with published values. The trapping efficiency in the heterogeneous (TiO[sub 2]) system was found to be ca 0.28. A method for quantum yield determinations in heterogeneous systems was developed, based on measurements of OH- radical generation rates and the flux of absorbed photons by TiO[sub 2] suspensions. A chemical actinometer was used to measure absorbed-photon flux. Good agreement with literature values was obtained for quantum yield measurements in p-benzoquinone and H[sub 2]O[sub 2] systems. Accordingly, the quantum yield of OH- radical generation in TiO[sub 2] suspensions was determined to be ca 0.040 at pH 7. Effects of suspension loading, light intensity, electron acceptor addition, and dissolved oxygen concentration on the quantum yield were observed. The effects of pH and buffer concentration on the formation rate of DMPO-OH spin adduct are discussed. 117 refs., 50 figs., 8 tabs.

  18. Using MODIS Data to Predict Regional Corn Yields

    Directory of Open Access Journals (Sweden)

    Ho-Young Ban

    2016-12-01

    Full Text Available A simple approach was developed to predict corn yields using the MoDerate Resolution Imaging Spectroradiometer (MODIS data product from two geographically separate major corn crop production regions: Illinois, USA and Heilongjiang, China. The MOD09A1 data, which are eight-day interval surface reflectance data, were obtained from day of the year (DOY 89 to 337 to calculate the leaf area index (LAI. The sum of the LAI from early in the season to a given date in the season (end of DOY (EOD was well fitted to a logistic function and represented seasonal changes in leaf area duration (LAD. A simple phenology model was derived to estimate the dates of emergence and maturity using the LAD-logistic function parameters b1 and b2, which represented the rate of increase in LAI and the date of maximum LAI, respectively. The phenology model predicted emergence and maturity dates fairly well, with root mean square error (RMSE values of 6.3 and 4.9 days for the validation dataset, respectively. Two simple linear regression models (YP and YF were established using LAD as the variable to predict corn yield. The yield model YP used LAD from predicted emergence to maturity, and the yield model YF used LAD for a predetermined period from DOY 89 to a particular EOD. When state/province corn yields for the validation dataset were predicted at DOY 321, near completion of the corn harvest, the YP model, including the predicted phenology, performed much better than the YF model, with RMSE values of 0.68 t/ha and 0.66 t/ha for Illinois and Heilongjiang, respectively. The YP model showed similar or better performance, even for the much earlier pre-harvest yield prediction at DOY 257. In addition, the model performance showed no difference between the two study regions with very different climates and cultivation methods, including cultivar and irrigation management. These results suggested that the approach described in this paper has potential for application to

  19. Exploring Students' Articulation of Value in a Social Research Methods Class: Towards a Phenomenography of Value Making

    Science.gov (United States)

    Guglietti, Maria

    2015-01-01

    This study describes journalism students' value making of social research methods, such as sampling, data gathering strategies and quantitative and qualitative data analysis, by using a mixed-­method approach to analyze 260 written reflection assignments. In their reflections, 26 student participants assessed the value of their new knowledge of…

  20. Evolution of heavy ions (He{sup 2+}, H{sup +}) radiolytic yield of molecular hydrogen vs. ''Track-Segment'' LET values

    Energy Technology Data Exchange (ETDEWEB)

    Crumiere, Francis; Vandenborre, Johan; Blain, Guillaume; Fattahi, Massoud [Nantes Univ., CNRS/IN2P3 (France). SUBATECH Unite Mixte de Recherche 6457; Haddad, Ferid [Nantes Univ., CNRS/IN2P3 (France). SUBATECH Unite Mixte de Recherche 6457; Cyclotron Arronax, Saint Herblain (France)

    2017-08-01

    Ionizing radiation's effects onto water molecules lead to the ionization and/or the excitation of them. Then, these phenomena are followed by the formation of radicals and molecular products. The linear energy transfer (LET), which defines the energy deposition density along the radiation length, is different according to the nature of ionizing particles. Thus, the values of radiolytic yields, defined as the number of radical and molecular products formed or consumed by unit of deposited energy, evolve according to this parameter. This work consists in following the evolution of radiolytic yield of molecular hydrogen and ferric ions according to the ''Track-Segment'' LET of ionizing particles (protons, helions). Concerning G(Fe{sup 3+}) values, it seems that the energy deposited into the Bragg peak does not play the main role for the Fe{sup 3+} radiolytic formation, whereas for the G(H{sub 2}) it is the case with a component around 40% of the Bragg peak in the dihydrogen production. Therefore, as main results of this work, for high energetic Helion and Proton beams, the G(Fe{sup 3+}) values, which can be used for further dosimetry studies for example during the α radiolysis experiments, and the primary g(H{sub 2}) values for the Track-Segment LET, which can be used to determine the dihydrogen production by α-emitters, are published.

  1. Influence of Previous Crop on Durum Wheat Yield and Yield Stability in a Long-term Experiment

    Directory of Open Access Journals (Sweden)

    Anna Maria Stellacci

    2011-02-01

    Full Text Available Long-term experiments are leading indicators of sustainability and serve as an early warning system to detect problems that may compromise future productivity. So the stability of yield is an important parameter to be considered when judging the value of a cropping system relative to others. In a long-term rotation experiment set up in 1972 the influence of different crop sequences on the yields and on yield stability of durum wheat (Triticum durum Desf. was studied. The complete field experiment is a split-split plot in a randomized complete block design with two replications; the whole experiment considers three crop sequences: 1 three-year crop rotation: sugar-beet, wheat + catch crop, wheat; 2 one-year crop rotation: wheat + catch crop; 3 wheat continuous crop; the split treatments are two different crop residue managements; the split-split plot treatments are 18 different fertilization formulas. Each phase of every crop rotation occurred every year. In this paper only one crop residue management and only one fertilization treatment have been analized. Wheat crops in different rotations are coded as follows: F1: wheat after sugar-beet in three-year crop rotation; F2: wheat after wheat in three-year crop rotation; Fc+i: wheat in wheat + catch crop rotation; Fc: continuous wheat. The following two variables were analysed: grain yield and hectolitre weight. Repeated measures analyses of variance and stability analyses have been perfomed for the two variables. The stability analysis was conducted using: three variance methods, namely the coefficient of variability of Francis and Kannenberg, the ecovalence index of Wricke and the stability variance index of Shukla; the regression method of Eberhart and Russell; a method, proposed by Piepho, that computes the probability of one system outperforming another system. It has turned out that each of the stability methods used has enriched of information the simple variance analysis. The Piepho

  2. New method to enhance the extraction yield of rutin from Sophora japonica using a novel ultrasonic extraction system by determining optimum ultrasonic frequency.

    Science.gov (United States)

    Liao, Jianqing; Qu, Baida; Liu, Da; Zheng, Naiqin

    2015-11-01

    A new method has been proposed for enhancing extraction yield of rutin from Sophora japonica, in which a novel ultrasonic extraction system has been developed to perform the determination of optimum ultrasonic frequency by a two-step procedure. This study has systematically investigated the influence of a continuous frequency range of 20-92 kHz on rutin yields. The effects of different operating conditions on rutin yields have also been studied in detail such as solvent concentration, solvent to solid ratio, ultrasound power, temperature and particle size. A higher extraction yield was obtained at the ultrasonic frequency of 60-62 kHz which was little affected under other extraction conditions. Comparative studies between existing methods and the present method were done to verify the effectiveness of this method. Results indicated that the new extraction method gave a higher extraction yield compared with existing ultrasound-assisted extraction (UAE) and soxhlet extraction (SE). Thus, the potential use of this method may be promising for extraction of natural materials on an industrial scale in the future. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. A Legendre Wavelet Spectral Collocation Method for Solving Oscillatory Initial Value Problems

    Directory of Open Access Journals (Sweden)

    A. Karimi Dizicheh

    2013-01-01

    wavelet suitable for large intervals, and then the Legendre-Guass collocation points of the Legendre wavelet are derived. Using this strategy, the iterative spectral method converts the differential equation to a set of algebraic equations. Solving these algebraic equations yields an approximate solution for the differential equation. The proposed method is illustrated by some numerical examples, and the result is compared with the exponentially fitted Runge-Kutta method. Our proposed method is simple and highly accurate.

  4. Adaptability and stability of soybean cultivars for grain yield and seed quality.

    Science.gov (United States)

    Silva, K B; Bruzi, A T; Zambiazzi, E V; Soares, I O; Pereira, J L A R; Carvalho, M L M

    2017-05-10

    This study aimed at verifying the adaptability and stability of soybean cultivars, considering the grain yield and quality of seeds, adopting univariate and multivariate approaches. The experiments were conducted in two crops, three environments, in 2013/2014 and 2014/2015 crop seasons, in the county of Inconfidentes, Lavras, and Patos de Minas, in the Minas Gerais State, Brazil. We evaluated 17 commercial soybean cultivars. For adaptability and stability evaluations, the Graphic and GGE biplot methods were employed. Previously, a selection index was estimated based on the sum of the standardized variables (Z index). The data relative to grain yield, mass of one thousand grain, uniformity test (sieve retention), and germination test were standardized (Z ij ) per cultivar. With the sum of Z ij , we obtained the selection index for the four traits evaluated together. In the Graphic method evaluation, cultivars NA 7200 RR and CD 2737 RR presented the highest values for selection index Z. By the GGE biplot method, we verified that cultivar NA 7200 RR presented greater stability in both univariate evaluations, for grain yield, and for selection index Z.

  5. Yield performance and stability of CMS-based triticale hybrids.

    Science.gov (United States)

    Mühleisen, Jonathan; Piepho, Hans-Peter; Maurer, Hans Peter; Reif, Jochen Christoph

    2015-02-01

    CMS-based triticale hybrids showed only marginal midparent heterosis for grain yield and lower dynamic yield stability compared to inbred lines. Hybrids of triticale (×Triticosecale Wittmack) are expected to possess outstanding yield performance and increased dynamic yield stability. The objectives of the present study were to (1) examine the optimum choice of the biometrical model to compare yield stability of hybrids versus lines, (2) investigate whether hybrids exhibit a more pronounced grain yield performance and yield stability, and (3) study optimal strategies to predict yield stability of hybrids. Thirteen female and seven male parental lines and their 91 factorial hybrids as well as 30 commercial lines were evaluated for grain yield in up to 20 environments. Hybrids were produced using a cytoplasmic male sterility (CMS)-inducing cytoplasm that originated from Triticumtimopheevii Zhuk. We found that the choice of the biometrical model can cause contrasting results and concluded that a group-by-environment interaction term should be added to the model when estimating stability variance of hybrids and lines. midparent heterosis for grain yield was on average 3 % with a range from -15.0 to 11.5 %. No hybrid outperformed the best inbred line. Hybrids had, on average, lower dynamic yield stability compared to the inbred lines. Grain yield performance of hybrids could be predicted based on midparent values and general combining ability (GCA)-predicted values. In contrast, stability variance of hybrids could be predicted only based on GCA-predicted values. We speculated that negative effects of the used CMS cytoplasm might be the reason for the low performance and yield stability of the hybrids. For this purpose a detailed study on the reasons for the drawback of the currently existing CMS system in triticale is urgently required comprising also the search of potentially alternative hybridization systems.

  6. Effect of Seed Priming, Sowing methods and Bio-fertilizers on Yield and Yield Components of Seedy Watermelon (Citrullus Lanatus

    Directory of Open Access Journals (Sweden)

    M Zarandi

    2018-02-01

    Full Text Available Introduction Watermelon (Citrullus Lanatus is one of the most important fresh fruits in Iran particularly during summer. After China, in terms of production and cultivation area, Iran placed second in the world. Research conducted in different regions (especially in arid and semi-arid regions, like Iran indicated that poor germination and establishment of seedlings in the field causes low yield, particularly in vegetables. Seed priming, (to increase the percentage and rate of germination and transplanting to increase plant establishment and use of bio-fertilizers to increase food availability during the growing season are inevitable to transfer to ecological agriculture. The purpose of this research was to evaluate the effect of seeds osmopriming, transplanting and bio-fertilizers on watermelon grain yield. Materials and Methods This experiment was conducted at split plot based on complete block design with three replications in the Laboratory, Greenhouse and the Farm of the Faculty of Agriculture, Ferdowsi University of Mashhad in 2013. First factor was seed priming in two levels (unprimed and primed, the second factor was transplanting in two levels (direct sowing and transplantation and the third factor was bio-fertilizers containing pseudomonas and Azotobacter in two levels (non bio-fertilizers and bio-fertilizers. Leaf area index (LAI, number of fruits per plant, number of seeds per fruit, 1000 seed weight, grain yield and total dry matter were determined. Results and Discussion Transplants produced using osmoprimed seeds that had been sprayed with bio-fertilizers on the field (T2P2K2 had higher LAI than the other treatments (Table 3. Bio-fertilizers in both transplanting and direct sowing produced more LAI, but osmopriming of seeds with PEG 6000 had little impact on LAI (Table 3. LAI is one of the growth parameters which had a great effect to achieve maximum yield that needs to be at higher level before flowering. Izadkhah et al. (2010 and

  7. Yield stress of alumina-zirconia suspensions

    International Nuclear Information System (INIS)

    Ramakrishnan, V.; Pradip; Malghan, S.G.

    1996-01-01

    The yield stress of concentrated suspensions of alumina, zirconia, and mixed alumina-zirconia powders was measured by the vane technique as a function of solids loading, relative amounts of alumina and zirconia, and pH. At the isoelectric point (IEP), the yield stress varied as the fourth power of the solids loading. The relative ratio of alumina and zirconia particles was important in determining the yield stress of the suspension at the IEP. The yield stress of single and mixed suspensions showed a marked variation with pH. The maximum value occurred at or near the IEP of the suspension. The effect of electrical double-layer forces on the yield stress can be described on the basis of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. A normalized yield stress--that is, the ratio of the yield stress at a given pH to the yield stress at the IEP predicted by this model--showed good correlation with experimental data

  8. Improvement of lipid yield from microalgae Spirulina platensis using ultrasound assisted osmotic shock extraction method

    Science.gov (United States)

    Adetya, NP; Hadiyanto, H.

    2018-01-01

    Microalgae Spirulina sp. has been identified as potential source of natural food supplement and food colorant. The high water content of microalgae (70-90%) causes an obstacle in biomass dehydration which requires large amounts of energy, eventually damaging the lipid in the microalgae. Therefore, the lipid must be extracted by using a suitable method which complies to wet biomass conditions. One of the methods is applying osmotic shock. This study was aimed to investigate the influence of osmotic agent (NaCl) concentration (10-30%) and extraction time (20-50 min) on yield of lipid and also to determine the optimal conditions in the extraction process through response surface methodology. The extraction was conducted at a temperature of 40°C under ultrasound frequency of 40 kHz. The result showed that the optimum yield lipid obtained was 6.39% in 16.98% NaCl concentration for 36 minutes 10 seconds.

  9. Effect of inoculation and nitrogen top-dressing on yields and fodder value of winter pea cv. Maksimirski ozimi in wheat cv. Sana mixture

    Directory of Open Access Journals (Sweden)

    Darko Uher

    2007-06-01

    Full Text Available Two year field trials (1999 - 2001 were performed to determine theinoculation seed winter pea and nitrogen top-dressing effect on number and active nodules of pea root and also on the green mass and dry matter yield of winter pea cv. Maksimirski ozimi and wheat cv. Sana mixture. Immediately before sowing the inoculation of pea seeds was accomplished by the indigenous variety of Rhizobium leguminosarum bv. viciae which belongs to the collection of Department of Microbiology at the Faculty of Agriculture University of Zagreb. The highest total nodule number on pea root (159 was determined on the inoculated variant as well as active nodule 144. Average mixture green mass yield were ranging from 24,65 t ha-1 (control up to 35,50 t ha-1 (inoculation. Total dry matter yields were ranging from 3,93 t ha-1 (control up to 5,66 t ha-1 (inoculation. Yields crude proteins pea in 2001 were ranging from 692 kg ha-1 (control up to 1058 kg ha-1 (inoculation and for wheat, those values ranged from 199 kg ha-1 (control up to 454 kg ha-1 (nitrogen top-dressing. Total crude proteins mixture yields were in range from 891 kg ha-1 (control up to 1360 kg ha-1 (inoculation.

  10. Analysis of yield advantage in mixed cropping

    NARCIS (Netherlands)

    Ranganathan, R.

    1993-01-01

    It has long been recognized that mixed cropping can give yield advantages over sole cropping, but methods that can identify such yield benefits are still being developed. This thesis presents a method that combines physiological and economic principles in the evaluation of yield advantage.

  11. Influence of different extraction methods on the yield and linalool content of the extracts of Eugenia uniflora L.

    Science.gov (United States)

    Galhiane, Mário S; Rissato, Sandra R; Chierice, Gilberto O; Almeida, Marcos V; Silva, Letícia C

    2006-09-15

    This work has been developed using a sylvestral fruit tree, native to the Brazilian forest, the Eugenia uniflora L., one of the Mirtaceae family. The main goal of the analytical study was focused on extraction methods themselves. The method development pointed to the Clevenger extraction as the best yield in relation to SFE and Soxhlet. The SFE method presented a good yield but showed a big amount of components in the final extract, demonstrating low selectivity. The essential oil extracted was analyzed by GC/FID showing a large range of polarity and boiling point compounds, where linalool, a widely used compound, was identified. Furthermore, an analytical solid phase extraction method was used to clean it up and obtain separated classes of compounds that were fractionated and studied by GC/FID and GC/MS.

  12. [Body condition and metabolic stability as the basis for high milk yield and undisturbed fertility in dairy cows--a contribution for deduction of reference values].

    Science.gov (United States)

    Staufenbiel, R; Arndt, G; Schröder, U; Gelfert, C C

    2004-05-01

    The target of this study was to describe the interactions between body condition and various descriptors of yield and fertility. It was aimed to identify an optimal conditional range to be used in herd management which combines high milk yield with acceptable fertility traits and general health. For this purpose, backfat thickness was measured by ultrasound at 46111 dairy cows on 78 different farms and was subsequently related to production variables. Negative energy balance is getting more intense and prolonged with increasing milk yield. However a conditional nadir below 10 mm leads to decreased milk production. To reach a high production level without an increasing incidence of health disorders, conditional nadir should not decline below 13 mm backfat thickness on herd average. Lower value only lead to negligibly higher milk yield but cause a distinctively higher risk of fertility problems and culling. High herd yields do not have to be at expense of reproduction performance and can be achieved without extreme body condition losses. An efficient herd management can offset depression in fertility, which commonly is combined with increasing milk yield. A standard curve for backfat thickness throughout lactation is suggested to be used in dairy herd management.

  13. Methods of integrating Islamic values in teaching biology for shaping attitude and character

    Science.gov (United States)

    Listyono; Supardi, K. I.; Hindarto, N.; Ridlo, S.

    2018-03-01

    Learning is expected to develop the potential of learners to have the spiritual attitude: moral strength, self-control, personality, intelligence, noble character, as well as the skills needed by themselves, society, and nation. Implementation of role and morale in learning is an alternative way which is expected to answer the challenge. The solution offered is to inject student with religious material Islamic in learning biology. The content value of materials teaching biology includes terms of practical value, religious values, daily life value, socio-political value, and the value of art. In Islamic religious values (Qur'an and Hadith) various methods can touch human feelings, souls, and generate motivation. Integrating learning with Islamic value can be done by the deductive or inductive approach. The appropriate method of integration is the amtsal (analog) method, hiwar (dialog) method, targhib & tarhib (encouragement & warning) method, and example method (giving a noble role model / good example). The right strategy in integrating Islamic values is outlined in the design of lesson plan. The integration of Islamic values in lesson plan will facilitate teachers to build students' character because Islamic values can be implemented in every learning steps so students will be accustomed to receiving the character value in this integrated learning.

  14. Modified Differential Transform Method for Two Singular Boundary Values Problems

    Directory of Open Access Journals (Sweden)

    Yinwei Lin

    2014-01-01

    Full Text Available This paper deals with the two singular boundary values problems of second order. Two singular points are both boundary values points of the differential equation. The numerical solutions are developed by modified differential transform method (DTM for expanded point. Linear and nonlinear models are solved by this method to get more reliable and efficient numerical results. It can also solve ordinary differential equations where the traditional one fails. Besides, we give the convergence of this new method.

  15. Approximate calculation method for integral of mean square value of nonstationary response

    International Nuclear Information System (INIS)

    Aoki, Shigeru; Fukano, Azusa

    2010-01-01

    The response of the structure subjected to nonstationary random vibration such as earthquake excitation is nonstationary random vibration. Calculating method for statistical characteristics of such a response is complicated. Mean square value of the response is usually used to evaluate random response. Integral of mean square value of the response corresponds to total energy of the response. In this paper, a simplified calculation method to obtain integral of mean square value of the response is proposed. As input excitation, nonstationary white noise and nonstationary filtered white noise are used. Integrals of mean square value of the response are calculated for various values of parameters. It is found that the proposed method gives exact value of integral of mean square value of the response.

  16. Comparison of specific-yield estimates for calculating evapotranspiration from diurnal groundwater-level fluctuations

    Science.gov (United States)

    Gribovszki, Zoltán

    2018-05-01

    Methods that use diurnal groundwater-level fluctuations are commonly used for shallow water-table environments to estimate evapotranspiration (ET) and recharge. The key element needed to obtain reliable estimates is the specific yield (Sy), a soil-water storage parameter that depends on unsaturated soil-moisture and water-table fluxes, among others. Soil-moisture profile measurement down to the water table, along with water-table-depth measurements, can provide a good opportunity to calculate Sy values even on a sub-daily scale. These values were compared with Sy estimates derived by traditional techniques, and it was found that slug-test-based Sy values gave the most similar results in a sandy soil environment. Therefore, slug-test methods, which are relatively cheap and require little time, were most suited to estimate Sy using diurnal fluctuations. The reason for this is that the timeframe of the slug-test measurement is very similar to the dynamic of the diurnal signal. The dynamic characteristic of Sy was also analyzed on a sub-daily scale (depending mostly on the speed of drainage from the soil profile) and a remarkable difference was found in Sy with respect to the rate of change of the water table. When comparing constant and sub-daily (dynamic) Sy values for ET estimation, the sub-daily Sy application yielded higher correlation, but only a slightly smaller deviation from the control ET method, compared with the usage of constant Sy.

  17. Calculating Heat of Formation Values of Energetic Compounds: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Michael S. Elioff

    2016-01-01

    Full Text Available Heat of formation is one of several important parameters used to assess the performance of energetic compounds. We evaluated the ability of six different methods to accurately calculate gas-phase heat of formation (ΔfH298,go values for a test set of 45 nitrogen-containing energetic compounds. Density functional theory coupled with the use of isodesmic or other balanced equations yielded calculated results in which 82% (37 of 45 of the ΔfH298,go values were within ±2.0 kcal/mol of the most recently recommended experimental/reference values available. This was compared to a procedure using density functional theory (DFT coupled with an atom and group contribution method in which 51% (23 of 45 of the ΔfH298,go values were within ±2.0 kcal/mol of these values. The T1 procedure and Benson’s group additivity method yielded results in which 51% (23 of 45 and 64% (23 of 36 of the ΔfH298,go values, respectively, were within ±2.0 kcal/mol of these values. We also compared two relatively new semiempirical approaches (PM7 and RM1 with regard to their ability to accurately calculate ΔfH298,go. Although semiempirical methods continue to improve, they were found to be less accurate than the other approaches for the test set used in this investigation.

  18. Correlation maps to assess soybean yield from EVI data in Paraná State, Brazil

    Directory of Open Access Journals (Sweden)

    Gleyce Kelly Dantas Araújo Figueiredo

    Full Text Available ABSTRACT Vegetation indices are widely used to monitor crop development and generally used as input data in models to forecast yield. The first step of this study consisted of using monthly Maximum Value Composites to create correlation maps using Enhanced Vegetation Index (EVI from Moderate Resolution Imaging Spectroradiometer (MODIS sensor mounted on Terra satellite and historical yield during the soybean crop cycle in Paraná State, Brazil, from 2000/2001 to 2010/2011. We compared the ability of forecasting crop yield based on correlation maps and crop specific masks. We ran a preliminary regression model to test its ability on yield estimation for four municipalities during the soybean growing season. A regression model was developed for both methodologies to forecast soybean crop yield using leave-one-out cross validation. The Root Mean Squared Error (RMSE values in the implementation of the model ranged from 0.037 t ha−1 to 0.19 t ha−1 using correlation maps, while for crop specific masks, it varied from 0.21 t ha−1 to 0.35 t ha−1. The model was able to explain 96 % to 98 % of the variance in estimated yield from correlation maps, while it was able to explain only 2 % to 67 % for crop specific mask approach. The results showed that the correlation maps could be used to predict crop yield more effectively than crop specific masks. In addition, this method can provide an indication of soybean yield prior to harvesting.

  19. Analysis of Yield and Yield Related Traits Variability of Winter Wheat (Triticum aestivum L. Cv. Izolda and Double Haploid Lines

    Directory of Open Access Journals (Sweden)

    Kozdój Janusz

    2015-12-01

    determining grain yield levels were also analyzed. Calculated total variation coefficients values of each analyzed trait during three-year long studies were different depending on plant material – DH lines or standard Izolda. Low variation coefficients values characterized following traits (traits ranked by increasing values for DH lines and standard Izolda, respectively: total spikelets number per spike (6.6 and 6.3%, spike length (11.1 and 12.6%, fertile spikelets number per spike (13.7 and 11.7%, single grain weight (15.0 and 12.2%, shoot length (16.2 and 13.3%, grains number per spikelet (26.4 and 23.3%, total shoots number per plant (23.4 and 29.6%, grains number per spike (30.1 and 28.2%. Higher variation coefficients values were obtained for the following traits: grain yield per spike (40.0 and 35.7%, plant immature tillers number (35.8 and 42.6%, plant productive tillers number (42.2 and 43.2%, spike sterile spikelets number (46.6 and 44.7% and number of grains per plant (58.3 and 60.5%. The highest values characterized grain yield per plant (66.9 and 60.8%.

  20. ZNJPrice/Earnings Ratio Model through Dividend Yield and Required Yield Above Expected Inflation

    Directory of Open Access Journals (Sweden)

    Emil Mihalina

    2010-07-01

    Full Text Available Price/earnings ratio is the most popular and most widespread evaluation model used to assess relative capital asset value on financial markets. In functional terms, company earnings in the very long term can be described with high significance. Empirically, it is visible from long-term statistics that the demanded (required yield on capital markets has certain regularity. Thus, investors first require a yield above the stable inflation rate and then a dividend yield and a capital increase caused by the growth of earnings that influence the price, with the assumption that the P/E ratio is stable. By combining the Gordon model for current dividend value, the model of market capitalization of earnings (price/earnings ratio and bearing in mind the influence of the general price levels on company earnings, it is possible to adjust the price/earnings ratio by deriving a function of the required yield on capital markets measured by a market index through dividend yield and inflation rate above the stable inflation rate increased by profit growth. The S&P 500 index for example, has in the last 100 years grown by exactly the inflation rate above the stable inflation rate increased by profit growth. The comparison of two series of price/earnings ratios, a modelled one and an average 7-year ratio, shows a notable correlation in the movement of two series of variables, with a three year deviation. Therefore, it could be hypothesized that three years of the expected inflation level, dividend yield and profit growth rate of the market index are discounted in the current market prices. The conclusion is that, at the present time, the relationship between the adjusted average price/earnings ratio and its effect on the market index on one hand and the modelled price/earnings ratio on the other can clearly show the expected dynamics and course in the following period.

  1. The effect of nitrogen and the method of application on yield and quality of broccoli

    NARCIS (Netherlands)

    Everaarts, A.P.; Willigen, de P.

    1999-01-01

    The effects of the rate and the method of N application on yield and quality of broccoli cv. Emperor were studied during 3 seasons at Andijk and Lelystad, Netherlands. Different amounts of N fertilizer were applied broadcast or band placed at planting. Band placement of fertilizer increased the

  2. Preconcentration method using an activatable yield tracer for neutron activation analysis

    International Nuclear Information System (INIS)

    Tsukada, Masamichi; Yamamoto, Daijiro; Endo, Kazutoyo; Nakahara, Hiromichi

    1991-01-01

    Previously, the use of an enriched stable isotope as an activatable yield tracer in preconcentration steps has been tested by use of commercially available enriched 116 Cd and 156 Dy for biological standard reference materials. In the present work, this method has been further applied to the determination of lanthanoid contents in various kinds of samples: one coal fly-ash, three Japanese standard rocks, and eight standard soils. Samples were decomposed by alkali fusion in the preconcentration step. Thirteen elements were determined for coal fly-ash and soil samples, and 14 elements for rocks. The data obtained for coal fly-ash and standard rocks are compared with the data reported in literature. The data for soil samples have been newly determined in the present work. The ordinary instrumental neutron activation analysis and radiochemical neutron activation analysis were also performed to confirm the accuracy and usefulness of the present method. (author) 10 refs.; 4 tabs

  3. Developing rapid methods for analyzing upland riparian functions and values.

    Science.gov (United States)

    Hruby, Thomas

    2009-06-01

    Regulators protecting riparian areas need to understand the integrity, health, beneficial uses, functions, and values of this resource. Up to now most methods providing information about riparian areas are based on analyzing condition or integrity. These methods, however, provide little information about functions and values. Different methods are needed that specifically address this aspect of riparian areas. In addition to information on functions and values, regulators have very specific needs that include: an analysis at the site scale, low cost, usability, and inclusion of policy interpretations. To meet these needs a rapid method has been developed that uses a multi-criteria decision matrix to categorize riparian areas in Washington State, USA. Indicators are used to identify the potential of the site to provide a function, the potential of the landscape to support the function, and the value the function provides to society. To meet legal needs fixed boundaries for assessment units are established based on geomorphology, the distance from "Ordinary High Water Mark" and different categories of land uses. Assessment units are first classified based on ecoregions, geomorphic characteristics, and land uses. This simplifies the data that need to be collected at a site, but it requires developing and calibrating a separate model for each "class." The approach to developing methods is adaptable to other locations as its basic structure is not dependent on local conditions.

  4. Value Added Methods: Moving from Univariate to Multivariate Criteria

    Science.gov (United States)

    Newman, David; Newman, Isadore; Ridenour, Carolyn; Morales, Jennifer

    2014-01-01

    The authors describe five value-added methods (VAM) used in school assessment as the backdrop to their main thesis. Then they review the assumptions underlying measurement and evaluation, the foundation of all assessment systems, including value-added. They discuss the traditional criterion variable used in VAM: a standardized test score. Next,…

  5. Diallel Analysis using Hayman Method to Study Genetic Parameters of Yield Components in Pepper(Capsicum annuum L.

    Directory of Open Access Journals (Sweden)

    MUHAMAD SYUKUR

    2010-12-01

    Full Text Available One method to obtain genetic information is the diallel cross analysis. The objective of this study was to eavluate the genetic parameters of six inbred pepper (Capsicum annuum L. using full diallel crosses. The experiment was conducted at IPB Experiment Field, Cikabayan, Darmaga. The design was randomized complete block design (RCBD using three replications as blocks. Data from generation F1 and parents were analyzed using the Hayman Method. Results indicated that no epistatic effects were significant for all the traits assessed. Additive genetic effects were larger than the dominant effects for yield per plant, fruit length, and diameter fruit traits. Dominant genetic effects were larger than the additive effects for fruit weight traits. Narrow-sense and broad-sense heritability were high for all the traits assessed. The character of the yield per plant, fruit weight and fruit diameter shows that there were more dominant genes in the parents. There were more recessive genes in parents for the fruit length character. IPB C7 parent was the most recessive genes containing control characters in the yield per plant. In the new improved varieties of high yielding, IPB C7 could be crossed with IPB C9. Employing individual or mass selection breeding should be successful in developing high-productivity lines in this population.

  6. Effect of inoculation and nitrogen top-dressing on yields and fodder value of winter pea cv. Maksimirski ozimi in triticale cv. Clercal mixture

    Directory of Open Access Journals (Sweden)

    Darko Uher

    2006-07-01

    Full Text Available Two year field trials (1999-2001 were aimed to determine the inoculation seed winter pea and nitrogen top-dressing effect on number and active nodules of pea root and also on the green mass and dry matter yield of winter pea cv. Maksimirski ozimi and triticale cv. Clercal mixture. Immediately before sowing the inoculation of pea seeds was done by the indigenous variety of Rhizobium leguminosarum bv. viciae which belongs to the collection of Department of Microbiology at the Faculty of Agriculture University of Zagreb. The highest total nodule number on pea root (134 was determined on the inoculated variant as well as active nodule (120. Average mixture green mass yields were ranging from 20.9 t ha-1 (control up to 30.1 t ha-1 (inoculation + nitrogen top-dressing. Total dry matter yields were ranging from 3.71 t ha-1 (control up to 5.36 t ha-1 (nitrogen top-dressing. Pea crude protein yields in 2001 were ranging from 500 kg ha-1 (nitrogen top-dressing up to 642 kg ha-1 (inoculation and for triticale, those values were from 322 kg ha-1 (control up to 498 kg ha-1 (nitrogen top-dressing. Total mixture crude proteins yields were from 845 kg ha-1 (control up to 998 kg ha-1 (nitrogen top-dressing.

  7. Speckle imaging using the principle value decomposition method

    International Nuclear Information System (INIS)

    Sherman, J.W.

    1978-01-01

    Obtaining diffraction-limited images in the presence of atmospheric turbulence is a topic of current interest. Two types of approaches have evolved: real-time correction and speckle imaging. A speckle imaging reconstruction method was developed by use of an ''optimal'' filtering approach. This method is based on a nonlinear integral equation which is solved by principle value decomposition. The method was implemented on a CDC 7600 for study. The restoration algorithm is discussed and its performance is illustrated. 7 figures

  8. Effect of Irrigation Methods, Nitrogen and Phosphorus Fertilizer Rates on Sugar Beet Yield and Quality

    International Nuclear Information System (INIS)

    Janat, M.; Abudlkareem, J.

    2007-01-01

    The experiment was conducted at a research station near Adlib. Two irrigation methods, sprinkler irrigation and drip fertigation, two phosphorus rates and four nitrogen rates 0, 70, 140 and 210 kg N/ha were tested. All N fertilizers were injected for drip irrigation or broadcasted for the sprinkler-irrigated treatments in six equally split applications. Neutron probe Results revealed that the introduction of drip fertigation was not proved to be a water saving relative to sprinkler irrigation. Dry matter production was slightly increased for the drip-fertigated treatments relative to sprinkler irrigated treatments. Nitrogen use efficiency was not improved under drip fertigation relative to that of sprinkler irrigation. Application of phosphorus fertilizer improved sugar beet yield as well as N uptake. No significant differences in sugar beet yield were observed due to the application of N fertilizer under drip fertigation. On the other hand, there was a trend toward increasing sugar beet yield grown under sprinkler irrigation. Drip fertigation had no negative effects on sugar content and other related properties, furthermore some of those properties were enhanced due to the employment of drip fertigation. Field water-use efficiency followed a similar trend and was increased under sprinkler irrigation relative to drip-fertigation for sugar beet yield parameter.

  9. Singular Value Decomposition Method to Determine Distance Distributions in Pulsed Dipolar Electron Spin Resonance.

    Science.gov (United States)

    Srivastava, Madhur; Freed, Jack H

    2017-11-16

    Regularization is often utilized to elicit the desired physical results from experimental data. The recent development of a denoising procedure yielding about 2 orders of magnitude in improvement in SNR obviates the need for regularization, which achieves a compromise between canceling effects of noise and obtaining an estimate of the desired physical results. We show how singular value decomposition (SVD) can be employed directly on the denoised data, using pulse dipolar electron spin resonance experiments as an example. Such experiments are useful in measuring distances and their distributions, P(r) between spin labels on proteins. In noise-free model cases exact results are obtained, but even a small amount of noise (e.g., SNR = 850 after denoising) corrupts the solution. We develop criteria that precisely determine an optimum approximate solution, which can readily be automated. This method is applicable to any signal that is currently processed with regularization of its SVD analysis.

  10. Contrast-enhanced 3T MR perfusion of musculoskeletal tumours. T1 value heterogeneity assessment and evaluation of the influence of T1 estimation methods on quantitative parameters

    Energy Technology Data Exchange (ETDEWEB)

    Gondim Teixeira, Pedro Augusto; Leplat, Christophe; Verbizier, Jacques de; Blum, Alain [Hopital Central, CHRU-Nancy, Service d' Imagerie Guilloz, Nancy (France); Chen, Bailiang; Beaumont, Marine [Universite de Lorraine, Laboratoire IADI, UMR S 947, Nancy (France); Badr, Sammy; Cotten, Anne [CHRU Lille Centre de Consultations et d' Imagerie de l' Appareil Locomoteur, Department of Radiology and Musculoskeletal Imaging, Lille (France)

    2017-12-15

    To evaluate intra-tumour and striated muscle T1 value heterogeneity and the influence of different methods of T1 estimation on the variability of quantitative perfusion parameters. Eighty-two patients with a histologically confirmed musculoskeletal tumour were prospectively included in this study and, with ethics committee approval, underwent contrast-enhanced MR perfusion and T1 mapping. T1 value variations in viable tumour areas and in normal-appearing striated muscle were assessed. In 20 cases, normal muscle perfusion parameters were calculated using three different methods: signal based and gadolinium concentration based on fixed and variable T1 values. Tumour and normal muscle T1 values were significantly different (p = 0.0008). T1 value heterogeneity was higher in tumours than in normal muscle (variation of 19.8% versus 13%). The T1 estimation method had a considerable influence on the variability of perfusion parameters. Fixed T1 values yielded higher coefficients of variation than variable T1 values (mean 109.6 ± 41.8% and 58.3 ± 14.1% respectively). Area under the curve was the least variable parameter (36%). T1 values in musculoskeletal tumours are significantly different and more heterogeneous than normal muscle. Patient-specific T1 estimation is needed for direct inter-patient comparison of perfusion parameters. (orig.)

  11. Effect of Traditional smoking Method on Nutritive Values and ...

    African Journals Online (AJOL)

    SH

    smoking method is an important preservation method which could enhance the nutritive values of fishes and possibly reduce post-harvest losses. Keywords: ... Fishery Laboratory of College of. Agricultural Sciences, Olabisi Onabanjo .... colour helps to determine quality, degree of processing or spoilage level (Clifford et al.,.

  12. Performance study of the simplified theory of plastic zones and the Twice-Yield method for the fatigue check

    International Nuclear Information System (INIS)

    Hübel, Hartwig; Willuweit, Adrian; Rudolph, Jürgen; Ziegler, Rainer; Lang, Hermann; Rother, Klemens; Deller, Simon

    2014-01-01

    As elastic–plastic fatigue analyses are still time consuming the simplified elastic–plastic analysis (e.g. ASME Section III, NB 3228.5, the French RCC-M code, paragraphs B 3234.3, B 3234.5 and B3234.6 and the German KTA rule 3201.2, paragraph 7.8.4) is often applied. Besides linearly elastic analyses and factorial plasticity correction (K e factors) direct methods are an option. In fact, calculation effort and accuracy of results are growing in the following graded scheme: a) linearly elastic analysis along with K e correction, b) direct methods for the determination of stabilized elastic–plastic strain ranges and c) incremental elastic–plastic methods for the determination of stabilized elastic–plastic strain ranges. The paper concentrates on option b) by substantiating the practical applicability of the simplified theory of plastic zones STPZ (based on Zarka's method) and – for comparison – the established Twice-Yield method. The Twice-Yield method is explicitly addressed in ASME Code, Section VIII, Div. 2. Application relevant aspects are particularly addressed. Furthermore, the applicability of the STPZ for arbitrary load time histories in connection with an appropriate cycle counting method is discussed. Note, that the STPZ is applicable both for the determination of (fatigue relevant) elastic–plastic strain ranges and (ratcheting relevant) locally accumulated strains. This paper concentrates on the performance of the method in terms of the determination of elastic–plastic strain ranges and fatigue usage factors. The additional performance in terms of locally accumulated strains and ratcheting will be discussed in a future publication. - Highlights: • Simplified elastic–plastic fatigue analyses. • Simplified theory of plastic zones. • Thermal cyclic loading. • Twice-Yield method. • Practical application examples

  13. Lowland rice yield estimates based on air temperature and solar radiation

    International Nuclear Information System (INIS)

    Pedro Júnior, M.J.; Sentelhas, P.C.; Moraes, A.V.C.; Villela, O.V.

    1995-01-01

    Two regression equations were developed to estimate lowland rice yield as a function of air temperature and incoming solar radiation, during the crop yield production period in Pindamonhangaba, SP, Brazil. The following rice cultivars were used: IAC-242, IAC-100, IAC-101 and IAC-102. The value of optimum air temperature obtained was 25.0°C and of optimum global solar radiation was 475 cal.cm -2 , day -1 . The best agrometeorological model was the one that related least deviation of air temperature and solar radiation in relation to the optimum value obtained through a multiple linear regression. The yield values estimated by the model showed good fit to actual yields of lowland rice (less than 10%). (author) [pt

  14. Effects of different biomass drying and lipid extraction methods on algal lipid yield, fatty acid profile, and biodiesel quality.

    Science.gov (United States)

    Hussain, Javid; Liu, Yan; Lopes, Wilson A; Druzian, Janice I; Souza, Carolina O; Carvalho, Gilson C; Nascimento, Iracema A; Liao, Wei

    2015-03-01

    Three lipid extraction methods of hexane Soxhlet (Sox-Hex), Halim (HIP), and Bligh and Dyer (BD) were applied on freeze-dried (FD) and oven-dried (OD) Chlorella vulgaris biomass to evaluate their effects on lipid yield, fatty acid profile, and algal biodiesel quality. Among these three methods, HIP was the preferred one for C. vulgaris lipid recovery considering both extraction efficiency and solvent toxicity. It had the highest lipid yields of 20.0 and 22.0% on FD and OD biomass, respectively, with corresponding neutral lipid yields of 14.8 and 12.7%. The lipid profiling analysis showed that palmitic, oleic, linoleic, and α-linolenic acids were the major fatty acids in the algal lipids, and there were no significant differences on the amount of these acids between different drying and extraction methods. Correlative models applied to the fatty acid profiles concluded that high contents of palmitic and oleic acids in algal lipids contributed to balancing the ratio of saturated and unsaturated fatty acids and led to a high-quality algal biodiesel.

  15. Effect of serotonin on the yield of UV-induced thymine dimers in DNA

    International Nuclear Information System (INIS)

    Frajkin, G.Ya.; Strakhovskaya, M.G.; Ivanova, Eh.V.

    1985-01-01

    Using fluorescence method serotonin interaction with DNA is studied and bond constant Ksub(c)=4.2x10 4 M -1 is defined. It is shown that bound serotonin reduces yield of UV-induced thymine dimers. Value of efficient distance of protective serotonin effect constituting part of DNA chain of 4 base pairs, is determined

  16. Fluence-dependent sputtering yield of micro-architectured materials

    Energy Technology Data Exchange (ETDEWEB)

    Matthes, Christopher S.R.; Ghoniem, Nasr M., E-mail: ghoniem@ucla.edu; Li, Gary Z.; Matlock, Taylor S.; Goebel, Dan M.; Dodson, Chris A.; Wirz, Richard E.

    2017-06-15

    Highlights: • Sputtering yield is shown to be transient and heavily dependent on surface architecture. • Fabricated nano- and Microstructures cause geometric re-trapping of sputtered material, which leads to a self-healing mechanism. • Initially, the sputtering yield of micro-architectured Mo is approximately 1/2 the value as that of a planar surface. • The study demonstrates that the sputtering yield is a dynamic property, dependent on the surface structure of a material. • A developed phenomenological model mathematically describes the transient behavior of the sputtering yield as a function of plasma fluence. - Abstract: We present an experimental examination of the relationship between the surface morphology of Mo and its instantaneous sputtering rate as function of low-energy plasma ion fluence. We quantify the dynamic evolution of nano/micro features of surfaces with built-in architecture, and the corresponding variation in the sputtering yield. Ballistic deposition of sputtered atoms as a result of geometric re-trapping is observed, and re-growth of surface layers is confirmed. This provides a self-healing mechanism of micro-architectured surfaces during plasma exposure. A variety of material characterization techniques are used to show that the sputtering yield is not a fundamental property, but that it is quantitatively related to the initial surface architecture and to its subsequent evolution. The sputtering yield of textured molybdenum samples exposed to 300 eV Ar plasma is roughly 1/2 of the corresponding value for flat samples, and increases with ion fluence. Mo samples exhibited a sputtering yield initially as low as 0.22 ± 5%, converging to 0.4 ± 5% at high fluence. The sputtering yield exhibits a transient behavior as function of the integrated ion fluence, reaching a steady-state value that is independent of initial surface conditions. A phenomenological model is proposed to explain the observed transient sputtering phenomenon, and to

  17. Valuing Convertible Bonds Based on LSRQM Method

    Directory of Open Access Journals (Sweden)

    Jian Liu

    2014-01-01

    Full Text Available Convertible bonds are one of the essential financial products for corporate finance, while the pricing theory is the key problem to the theoretical research of convertible bonds. This paper demonstrates how to price convertible bonds with call and put provisions using Least-Squares Randomized Quasi-Monte Carlo (LSRQM method. We consider the financial market with stochastic interest rates and credit risk and present a detailed description on calculating steps of convertible bonds value. The empirical results show that the model fits well the market prices of convertible bonds in China’s market and the LSRQM method is effective.

  18. METHODS OF STEREO PAIR IMAGES FORMATION WITH A GIVEN PARALLAX VALUE

    Directory of Open Access Journals (Sweden)

    Viktoriya G. Chafonova

    2014-11-01

    Full Text Available Two new complementary methods of stereo pair images formation are proposed. The first method is based on finding the maximum correlation between the gradient images of the left and right frames. The second one implies the finding of the shift between two corresponding key points of images for a stereo pair found by a detector of point features. These methods give the possibility to set desired values of vertical and horizontal parallaxes for the selected object in the image. Application of these methods makes it possible to measure the parallax values for the objects on the final stereo pair in pixels and / or the percentage of the total image size. It gives the possibility to predict the possible excesses in parallax values while stereo pair printing or projection. The proposed methods are easily automated after object selection, for which a predetermined value of the horizontal parallax will be exposed. Stereo pair images superposition using the key points takes less than one second. The method with correlation application requires a little bit more computing time, but makes it possible to control and superpose undivided anaglyph image. The proposed methods of stereo pair formation can find their application in programs for editing and processing images of a stereo pair, in the monitoring devices for shooting cameras and in the devices for video sequence quality assessment

  19. Comparison of different methods for extraction from Tetraclinis articulata: yield, chemical composition and antioxidant activity.

    Science.gov (United States)

    Herzi, Nejia; Bouajila, Jalloul; Camy, Séverine; Romdhane, Mehrez; Condoret, Jean-Stéphane

    2013-12-15

    In the present study, three techniques of extraction: hydrodistillation (HD), solvent extraction (conventional 'Soxhlet' technique) and an innovative technique, i.e., the supercritical fluid extraction (SFE), were applied to ground Tetraclinis articulata leaves and compared for extraction duration, extraction yield, and chemical composition of the extracts as well as their antioxidant activities. The extracts were analyzed by GC-FID and GC-MS. The antioxidant activity was measured using two methods: ABTS(•+) and DPPH(•). The yield obtained using HD, SFE, hexane and ethanol Soxhlet extractions were found to be 0.6, 1.6, 40.4 and 21.2-27.4 g/kg respectively. An original result of this study is that the best antioxidant activity was obtained with an SFE extract (41 mg/L). The SFE method offers some noteworthy advantages over traditional alternatives, such as shorter extraction times, low environmental impact, and a clean, non-thermally-degraded final product. Also, a good correlation between the phenolic contents and the antioxidant activity was observed with extracts obtained by SFE at 9 MPa. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. The value of earth observations: methods and findings on the value of Landsat imagery

    Science.gov (United States)

    Miller, Holly M.; Serbina, Larisa O.; Richardson, Leslie A.; Ryker, Sarah J.; Newman, Timothy R.

    2016-01-01

    Data from Earth observation systems are used extensively in managing and monitoring natural resources, natural hazards, and the impacts of climate change, but the value of such data can be difficult to estimate, particularly when it is available at no cost. Assessing the socioeconomic and scientific value of these data provides a better understanding of the existing and emerging research, science, and applications related to this information and contributes to the decision making process regarding current and future Earth observation systems. Recent USGS research on Landsat data has advanced the literature in this area by using a variety of methods to estimate value. The results of a 2012 survey of Landsat users, a 2013 requirements assessment, and 2013 case studies of applications of Landsat imagery are discussed.

  1. Analysis by the Residual Method for Estimate Market Value of Land on the Areas with Mining Exploitation in Subsoil under Future New Building

    Science.gov (United States)

    Gwozdz-Lason, Monika

    2017-12-01

    This paper attempts to answer some of the following questions: what is the main selling advantage of a plot of land on the areas with mining exploitation? which attributes influence on market value the most? and how calculate the mining influence in subsoil under future new building as market value of plot with commercial use? This focus is not accidental, as the paper sets out to prove that the subsoil load bearing capacity, as directly inferred from the local geotechnical properties with mining exploitation, considerably influences the market value of this type of real estate. Presented in this elaborate analysis and calculations, are part of the ongoing development works which aimed at suggesting a new technology and procedures for estimating the value of the land belonging to the third category geotechnical. Analysed the question was examined both in terms of the theoretical and empirical. On the basis of the analysed code calculations in residual method, numerical, statistical and econometric defined results and final conclusions. A market analysis yielded a group of subsoil stabilization costs which depend on the mining operations interaction, subsoil parameters, type of the contemplated structure, its foundations, selected stabilization method, its overall area and shape.

  2. Molecular statics simulations of buckling and yielding of gold nanowires deformed in axial compression

    International Nuclear Information System (INIS)

    Jiang, W.; Batra, R.C.

    2009-01-01

    We use molecular statics simulations with the embedded atom method potential to delineate yielding (material instability) and buckling (structural instability) in gold nanowires deformed axially in compression. It is found that both local (stacking faults) and global instabilities occur when the gold nanowire yields but only global instabilities occur when the nanowire buckles. Furthermore strong surface effects reorient the lattice structure which significantly increases Young's modulus in the axial direction and cause a nanowire of relatively small slenderness ratio (e.g., 14) to buckle. Upon complete unloading of the nanowires, the average axial stress and the total potential energy revert to their values in the reference configuration for the nanowires that buckled but not for the one that yielded.

  3. Measurements of beryllium sputtering yields at JET

    Science.gov (United States)

    Jet-Efda Contributors Stamp, M. F.; Krieger, K.; Brezinsek, S.

    2011-08-01

    The lifetime of the beryllium first wall in ITER will depend on erosion and redeposition processes. The physical sputtering yields for beryllium (both deuterium on beryllium (Be) and Be on Be) are of crucial importance since they drive the erosion process. Literature values of experimental sputtering yields show an order of magnitude variation so predictive modelling of ITER wall lifetimes has large uncertainty. We have reviewed the old beryllium yield experiments on JET and used current beryllium atomic data to produce revised beryllium sputtering yields. These experimental measurements have been compared with a simple physical sputtering model based on TRIM.SP beryllium yield data. Fair agreement is seen for beryllium yields from a clean beryllium limiter. However the yield on a beryllium divertor tile (with C/Be co-deposits) shows poor agreement at low electron temperatures indicating that the effect of the higher sputtering threshold for beryllium carbide is important.

  4. Yields from pyrolysis of refinery residue using a batch process

    Directory of Open Access Journals (Sweden)

    S. Prithiraj

    2017-12-01

    Full Text Available Batch pyrolysis was a valuable process of assessing the potential of recovering and characterising products from hazardous waste materials. This research explored the pyrolysis of hydrocarbon-rich refinery residue, from crude oil processes, in a 1200 L electrically-heated batch retort. Furthermore, the off-gases produced were easily processed in compliance with existing regulatory emission standards. The methodology offers a novel, cost-effective and environmentally compliant method of assessing recovery potential of valuable products. The pyrolysis experiments yielded significant oil (70% with high calorific value (40 MJ/kg, char (14% with carbon content over 80% and non-condensable gas (6% with significant calorific value (240 kJ/mol. The final gas stream was subjected to an oxidative clean-up process with continuous on-line monitoring demonstrating compliance with South African emission standards. The gas treatment was overall economically optimal as only a smaller portion of the original residue was subjected to emission-controlling steps. Keywords: Batch pyrolysis, Volatiles, Oil yields, Char, Emissions, Oil recovery

  5. Effect of Different Methods of Chemical Weed Control Irrigation Regimes on Weed Biomass and Safflower Yield

    Directory of Open Access Journals (Sweden)

    M. Matinfar

    2011-06-01

    Full Text Available In order to investigate the effects of different weed control methods and moisture regimes on safflower (Carthamus tinctorius, a field split plot experiment based on randomized complete block design with 4 replications was conducted in Takestan Iran, during growing seasons of 2007-8. Three irrigations regimes (normal irrigation, restricted irrigation at stem elongation and restricted irrigation at  flowering stage were assigned to the main plots and nine chemical weed control method (complete hand weeding, treflan with 2 L/ha as pre plant herbicide, sonalan with 3 L/ha ad pre plant herbicide, estomp with 3 L/ha as pre plant herbicide, gallant super with 0/75 L/ha as post emergence herbicide, treflan with 2 L/ha as pre plant herbicide+ gallant super with 0/75 L/ha as post emergence herbicide, sonalan with 3 L/ha as pre plant herbicide + gallant super with 0/75 L/ha as post emergence herbicide estomp with 3 L/ha as pre plant herbicide + gallant super with 0/75 L/ha as post emergence herbicide and without hand weeding to sub- plots. At the end of growing period traits like number of head   per plant, number of seed per head, 1000 grain weight, percent of seed oil, yield of seed oil and grain yield were measured. Results indicated that treflan + gallant super treatment in restricted irrigation at stem elongation stage had the lowest dry weight of weeds. In this study maximum grain yield (2927 Kg/ha was achieved from hand weeding + usual irrigation treatments. In general treflan + gallant super treatment was the most effective treatment on safflower yield and weed control.

  6. Conception and Definition Method of Tolerant Water Yield and Sediment Yield of Small Watershed%小流域容许产水产沙量的概念与确定方法

    Institute of Scientific and Technical Information of China (English)

    杜树汉; 刘刚才

    2011-01-01

    The conception and definition method of tolerant water yield and sediment yield of small watershed were put forward. The main influencing factors of tolerant water yield and sediment yield of small watershed were soil forming rate, productivity of land, water body and water quality, sediment transport amount and quantity of water resources.%提出了小流域容许产水产沙量的概念及确定方法,指出小流域容许产水产沙量的主要影响因素为:成土速率、土地生产力、水体水质、泥沙输移量、水资源量.

  7. Missing value imputation in DNA microarrays based on conjugate gradient method.

    Science.gov (United States)

    Dorri, Fatemeh; Azmi, Paeiz; Dorri, Faezeh

    2012-02-01

    Analysis of gene expression profiles needs a complete matrix of gene array values; consequently, imputation methods have been suggested. In this paper, an algorithm that is based on conjugate gradient (CG) method is proposed to estimate missing values. k-nearest neighbors of the missed entry are first selected based on absolute values of their Pearson correlation coefficient. Then a subset of genes among the k-nearest neighbors is labeled as the best similar ones. CG algorithm with this subset as its input is then used to estimate the missing values. Our proposed CG based algorithm (CGimpute) is evaluated on different data sets. The results are compared with sequential local least squares (SLLSimpute), Bayesian principle component analysis (BPCAimpute), local least squares imputation (LLSimpute), iterated local least squares imputation (ILLSimpute) and adaptive k-nearest neighbors imputation (KNNKimpute) methods. The average of normalized root mean squares error (NRMSE) and relative NRMSE in different data sets with various missing rates shows CGimpute outperforms other methods. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. A Method for Proposing Valued-Adding Attributes in Customized Housing

    Directory of Open Access Journals (Sweden)

    Cynthia S. Hentschke

    2014-12-01

    Full Text Available In most emerging economies, there has been many incentives and high availability of funding for low-cost housing projects. This has encouraged product standardization and the application of mass production ideas, based on the assumption that this is the most effective strategy for reducing costs. However, the delivery of highly standardized housing units to customers with different needs, without considering their lifestyle and perception of value, often results in inadequate products. Mass customization has been pointed out as an effective strategy to improve value generation in low-cost housing projects, and to avoid waste caused by renovations done in dwellings soon after occupancy. However, one of the main challenges for the implementation of mass customization is the definition of a set of relevant options based on users’ perceived value. The aim of this paper is to propose a method for defining value adding attributes in customized housing projects, which can support decision-making in product development. The means-end chain theory was used as theoretical framework to connect product attributes and costumers’ values, through the application of the laddering technique. The method was tested in two house-building projects delivered by a company from Brazil. The main contribution of this method is to indicate the customization units that are most important for users along with the explanation of why those units are the most relevant ones.

  9. Yield of opportunistic targeted screening for type 2 diabetes in primary care: the diabscreen study.

    NARCIS (Netherlands)

    Klein Woolthuis, E.P.; Grauw, W.J.C. de; Gerwen, W.H.E.M. van; Hoogen, H.J.M. van den; Lisdonk, E.H. van de; Metsemakers, J.F.M.; Weel, C. van

    2009-01-01

    PURPOSE: In screening for type 2 diabetes, guidelines recommend targeting high-risk individuals. Our objectives were to assess the yield of opportunistic targeted screening for type 2 diabetes in primary care and to assess the diagnostic value of various risk factors. METHODS: In 11 family practices

  10. INFLUENCE OF WEATHER CONDITIONS ON GRAIN YIELD, OIL CONTENT AND OIL YIELD OF NEW OS SUNFLOWER HYBRIDS

    Directory of Open Access Journals (Sweden)

    Anto Mijić

    2017-01-01

    Full Text Available With the purpose of determining the influence of weather conditions on the yield components of sunflower, the results of three-year field trials are analysed in the paper. In the trials sown in Osijek in 2013, 2014 and 2015, there were 15 sunflower hybrids: two foreign hybrids and 13 hybrid combinations of the Agricultural Institute Osijek. In the period before sowing (January – March, the highest amount of precipitation was in 2013 (213.1 mm, then in 2015 (167.9 mm, and the lowest in 2014 (109.5 mm. In the growing period (April – September, the highest amount of precipitation (487.3 mm was in 2014, 475.7 mm in 2013, and in 2015 it was the lowest (251.6 mm. In 2013, during the growing period, the mean monthly air temperature was 19.1°C, in 2015 19.9°C, and in 2014 18.6°C. Of these years, statistically significant at the P=0.05, the highest value of the analysed traits was recorded in 2013: grain yield of 6.47 t ha-1, oil content 51.69% and oil yield 3.05 t ha-1. Grain yield, oil content and oil yield were lower in 2015, and the lowest in 2014. Matej, a newly recognized sunflower hybrid of the Agricultural Institute Osijek had the highest values of grain and oil yield (6.95 and 3.39 t ha-1, and by its oil content of 53.44%, it was in the third place. For high grain and oil yields of sunflower, in addition to the optimal air temperature, the amount and distribution of precipitation before and also during the growing season are very important.

  11. A novel method to value real options in health care: the case of a multicohort human papillomavirus vaccination strategy.

    Science.gov (United States)

    Favato, Giampiero; Baio, Gianluca; Capone, Alessandro; Marcellusi, Andrea; Saverio Mennini, Francesco

    2013-07-01

    years yielded a real option value (€17,723) equivalent to that attributed to a single cohort of 12-year-old girls (€17,460). The payoff method showed distinctive advantages in the valuation of the cost-effectiveness of competing health care interventions, essentially determined by the replacement of the nonfuzzy numbers that are commonly used in cost-effectiveness analysis models, with fuzzy numbers as an input to inform the real option pricing method. The real option approach to value uncertainty makes policy making in health care an evolutionary process and creates a new "space" for decision-making choices. Copyright © 2013 Elsevier HS Journals, Inc. All rights reserved.

  12. High-yield Synthesis of Multiwalled Carbon Nanotube by Mechanothermal Method

    Directory of Open Access Journals (Sweden)

    Manafi SA

    2009-01-01

    Full Text Available Abstract This study reports on the mechanothermal synthesis of multiwalled carbon nanotube (MWCNTs from elemental graphite powder. Initially, high ultra-active graphite powder can be obtained by mechanical milling under argon atmosphere. Finally, the mechanical activation product is heat-treated at 1350°C for 2–4 h under argon gas flow. After heat-treatment, active graphite powders were successfully changed into MWCNTs with high purity. The XRD analyses showed that in the duration 150 h of milling, all the raw materials were changed to the desired materials. From the broadening of the diffraction lines in the XRD patterns, it was concluded that the graphite crystallites were nanosized, and raising the milling duration resulted in the fineness of the particles and the increase of the strain. The structure and morphology of MWCNTs were investigated using scanning electron microscopy (SEM and high-resolution transmission electron microscopy (HRTEM. The yield of MWCNTs was estimated through SEM and TEM observations of the as-prepared samples was to be about 90%. Indeed, mechanothermal method is of interest for fundamental understanding and improvement of commercial synthesis of carbon nanotubes (CNTs. As a matter of fact, the method of mechanothermal guarantees the production of MWCNTs suitable for different applications.

  13. Effects of different irrigation programs on yield and quality ...

    African Journals Online (AJOL)

    Evapotranspiration (ET) values varied from 93.1 to 466.3 mm for the treatments. The highest yield was obtained from the S3 and S4 treatments. A significant polynomial correlation was obtained between the yield and irrigation water, and between the yield and ET (P < 0.01). This indicated that when irrigation water and ET ...

  14. Method and analysis for determining yielding of titanium alloy with nonlinear Rayleigh surface waves

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Shifeng; Zhang, Lei; Mirshekarloo, Meysam Sharifzadeh; Chen, Shuting; Chen, Yi Fan; Wong, Zheng Zheng; Shen, Zhiyuan; Liu, Huajun; Yao, Kui, E-mail: k-yao@imre.a-star.edu.sg

    2016-07-04

    Methods for determining yielding of titanium (Ti) alloy material with second harmonic Rayleigh ultrasonic wave are investigated. Both piezoelectric angle beam transducers and high frequency laser scanning vibrometer (LSV) are used to detect ultrasonic signals in the Ti alloy specimens with different plastic strain levels. Technical features and outcomes with use of piezoelectric transducers and LSV are compared. The method using piezoelectric transducers, with much higher signal-to-noise ratio than LSV, has been further improved by deploying two transducers with central frequencies corresponding to the fundamental and second order harmonic signals respectively to improve the testing reliability and accuracy. Both the techniques using piezoelectric transducer and LSV demonstrate consistently that the acoustic nonlinearity increases with plastic strain, and the second harmonic Rayleigh ultrasonic wave can be utilized for effective determination of yielding in Ti alloy. Our experiments further show that the acoustic nonlinearity increases gradually with plastic strain at small plastic strain level, and there is a more significant increase of acoustic nonlinearity when the plastic strain reaches a higher level. Microscopic investigations using scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) are conducted for clarifying the relationship between the observed acoustic nonlinearity and micro-structural changes.

  15. Water-Yield Relations of Drip Irrigated Watermelon in Temperate Climatic Conditions

    Directory of Open Access Journals (Sweden)

    Pejić Borivoj

    2016-08-01

    Full Text Available The objective of the study, conducted in Vojvodina a northern part of the Serbia Republic, was to analyse the effect of drip irrigation on yield, evapotranspiration and water productivity of watermelon (Cirullus lanatus Thunb. grown with plasticulture. Irrigation was scheduled on the basis of water balance method. Daily evapotranspiration was computed using the reference evapotranspiration and crop coefficient. The yield of watermelon in irrigation conditions (37,28 t/ha was significantly higher compared to non irrigated (9,98 t/ha. Water used on evapotranspiration in irrigation conditions was 398 mm and 117 mm on non irrigated variant. The crop yield response factor of 1,04 for the whole growing season reveals that relative yield decrease was nearly equal to the rate of evapotranspiration deficit. The values of irrigation water use efficiency and evapotranspiration water use efficiency were 9,93 kg/m3 and 10,29 kg/m3 respectively. The determined results could be used as a good platform for watermelon growers in the region, in terms of improvement of the optimum utilization of irrigation water.

  16. A Multiple Criteria Decision Making Method Based on Relative Value Distances

    Directory of Open Access Journals (Sweden)

    Shyur Huan-jyh

    2015-12-01

    Full Text Available This paper proposes a new multiple criteria decision-making method called ERVD (election based on relative value distances. The s-shape value function is adopted to replace the expected utility function to describe the risk-averse and risk-seeking behavior of decision makers. Comparisons and experiments contrasting with the TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution method are carried out to verify the feasibility of using the proposed method to represent the decision makers’ preference in the decision making process. Our experimental results show that the proposed approach is an appropriate and effective MCDM method.

  17. Determination of yields of gaseous products of carbohydrates radiolysis by mass spectrometry method. [. gamma. rays

    Energy Technology Data Exchange (ETDEWEB)

    Ivko, A A; Gol' din, S I; Bondarenko, N T; Markevich, S V; Sharpatii, V A [AN SSSR, Moscow. Inst. Khimicheskoj Fiziki

    1977-01-01

    Possible complications are treated involved in the mass spectral study of the radiolytic products of deuterated carbohydrates. A method is proposed suitable for the evaluation of hydrogen isotopes relations and the content of deuterium in water. It has been possible to identify the major gaseous radiolytic products of glucose, polyglucan and dextran, and also to assess their radiation-chemical yields.

  18. Managment oriented analysis of sediment yield time compression

    Science.gov (United States)

    Smetanova, Anna; Le Bissonnais, Yves; Raclot, Damien; Nunes, João P.; Licciardello, Feliciana; Le Bouteiller, Caroline; Latron, Jérôme; Rodríguez Caballero, Emilio; Mathys, Nicolle; Klotz, Sébastien; Mekki, Insaf; Gallart, Francesc; Solé Benet, Albert; Pérez Gallego, Nuria; Andrieux, Patrick; Moussa, Roger; Planchon, Olivier; Marisa Santos, Juliana; Alshihabi, Omran; Chikhaoui, Mohamed

    2016-04-01

    The understanding of inter- and intra-annual variability of sediment yield is important for the land use planning and management decisions for sustainable landscapes. It is of particular importance in the regions where the annual sediment yield is often highly dependent on the occurrence of few large events which produce the majority of sediments, such as in the Mediterranean. This phenomenon is referred as time compression, and relevance of its consideration growths with the increase in magnitude and frequency of extreme events due to climate change in many other regions. So far, time compression has ben studied mainly on events datasets, providing high resolution, but (in terms of data amount, required data precision and methods), demanding analysis. In order to provide an alternative simplified approach, the monthly and yearly time compressions were evaluated in eight Mediterranean catchments (of the R-OSMed network), representing a wide range of Mediterranean landscapes. The annual sediment yield varied between 0 to ~27100 Mg•km-2•a-1, and the monthly sediment yield between 0 to ~11600 Mg•km-2•month-1. The catchment's sediment yield was un-equally distributed at inter- and intra-annual scale, and large differences were observed between the catchments. Two types of time compression were distinguished - (i) the inter-annual (based on annual values) and intra- annual (based on monthly values). Four different rainfall-runoff-sediment yield time compression patterns were observed: (i) no time-compression of rainfall, runoff, nor sediment yield, (ii) low time compression of rainfall and runoff, but high compression of sediment yield, (iii) low compression of rainfall and high of runoff and sediment yield, and (iv) low, medium and high compression of rainfall, runoff and sediment yield. All four patterns were present at inter-annual scale, while at intra-annual scale only the two latter were present. This implies that high sediment yields occurred in

  19. A method for developing a large-scale sediment yield index for European river basins

    Energy Technology Data Exchange (ETDEWEB)

    Delmas, Magalie; Cerdan, Olivier; Garcin, Manuel [BRGM ARN/ESL, Orleans (France); Mouchel, Jean-Marie [UMR Sisyphe, Univ. P and M Curie, Paris (France)

    2009-12-15

    Background, aim, and scope: Sediment fluxes within continental areas play a major role in biogeochemical cycles and are often the cause of soil surface degradation as well as water and ecosystem pollution. In a situation where a high proportion of the land surface is experiencing significant global land use and climate changes, it appears important to establish sediment budgets considering the major processes forcing sediment redistribution within drainage areas. In this context, the aim of this study is to test a methodology to estimate a sediment yield index at a large spatial resolution for European river basins. Data and methods: Four indicators representing processes respectively considered as sources (mass movement and hillslope erosion), sinks (deposits), and transfers of sediments (drainage density) are defined using distributed data. Using these indicators we propose a basic conceptual approach to test the possibility of explaining sediment yield observed at the outlet of 29 selected European river basins. We propose an index which adds the two sources and transfers, and subsequently subtracts the sink term. This index is then compared to observed sediment yield data. Results: With this approach, variability between river basins is observed and the evolution of each indicator analyzed. A linear regression shows a correlation coefficient of 0.83 linking observed specific sediment yield (SSY) with the SSY index. Discussion: To improve this approach at this large river basin scale, basin classification is further refined using the relation between the observed SSY and the index obtained from the four indicators. It allows a refinement of the results. Conclusions: This study presents a conceptual approach offering the advantages of using spatially distributed data combined with major sediment redistribution processes to estimate the sediment yield observed at the outlet of river basins. Recommendations and perspectives: Inclusion of better information on

  20. Analysis of incident-energy dependence of delayed neutron yields in actinides

    Energy Technology Data Exchange (ETDEWEB)

    Nasir, Mohamad Nasrun bin Mohd, E-mail: monasr211@gmail.com; Metorima, Kouhei, E-mail: kohei.m2420@hotmail.co.jp; Ohsawa, Takaaki, E-mail: ohsawa@mvg.biglobe.ne.jp; Hashimoto, Kengo, E-mail: kengoh@pp.iij4u.or.jp [Graduate School of Science and Engineering, Kindai University, Kowakae, Higashi-Osaka, 577-8502 (Japan)

    2015-04-29

    The changes of delayed neutron yields (ν{sub d}) of Actinides have been analyzed for incident energy up to 20MeV using realized data of precursor after prompt neutron emission, from semi-empirical model, and delayed neutron emission probability data (P{sub n}) to carry out a summation method. The evaluated nuclear data of the delayed neutron yields of actinide nuclides are still uncertain at the present and the cause of the energy dependence has not been fully understood. In this study, the fission yields of precursor were calculated considering the change of the fission fragment mass yield based on the superposition of fives Gaussian distribution; and the change of the prompt neutrons number associated with the incident energy dependence. Thus, the incident energy dependent behavior of delayed neutron was analyzed.The total number of delayed neutron is expressed as ν{sub d}=∑Y{sub i} • P{sub ni} in the summation method, where Y{sub i} is the mass yields of precursor i and P{sub ni} is the delayed neutron emission probability of precursor i. The value of Y{sub i} is derived from calculation of post neutron emission mass distribution using 5 Gaussian equations with the consideration of large distribution of the fission fragments. The prompt neutron emission ν{sub p} increases at higher incident-energy but there are two different models; one model says that the fission fragment mass dependence that prompt neutron emission increases uniformly regardless of the fission fragments mass; and the other says that the major increases occur at heavy fission fragments area. In this study, the changes of delayed neutron yields by the two models have been investigated.

  1. Development of a “Fission-proxy” Method for the Measurement of 14-MeV Neutron Fission Yields at CAMS

    Energy Technology Data Exchange (ETDEWEB)

    Gharibyan, Narek [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-25

    Relative fission yield measurements were made for 50 fission products from 25.6±0.5 MeV alpha-induced fission of Th-232. Quantitative comparison of these experimentally measured fission yields with the evaluated fission yields from 14-MeV neutron-induced fission of U-235 demonstrates the feasibility of the proposed fission-proxy method. This new technique, based on the Bohr-independence hypothesis, permits the measurement of fission yields from an alternate reaction pathway (Th-232 + 25.6 MeV α → U-236* vs. U-235 + 14-MeV n → U-236*) given that the fission process associated with the same compound nucleus is independent of its formation. Other suitable systems that can potentially be investigated in this manner include (but are not limited to) Pu-239 and U-237.

  2. Yield and forage value of a dual-purpose bmr-12 sorghum hybrid

    Science.gov (United States)

    Grain sorghum [Sorghum bicolor (L.) Moench] is an important crop for rainfed production systems with 2.7 million ha grown in the USA in 2013. The brown-midrib (bmr) mutations, especially bmr-12, have resulted in low stover lignin and high fiber digestibility without reducing grain yield in some sor...

  3. Methods to estimate breeding values in honey bees

    NARCIS (Netherlands)

    Brascamp, E.W.; Bijma, P.

    2014-01-01

    Background Efficient methodologies based on animal models are widely used to estimate breeding values in farm animals. These methods are not applicable in honey bees because of their mode of reproduction. Observations are recorded on colonies, which consist of a single queen and thousands of workers

  4. Chebyshev Finite Difference Method for Fractional Boundary Value Problems

    Directory of Open Access Journals (Sweden)

    Boundary

    2015-09-01

    Full Text Available This paper presents a numerical method for fractional differential equations using Chebyshev finite difference method. The fractional derivatives are described in the Caputo sense. Numerical results show that this method is of high accuracy and is more convenient and efficient for solving boundary value problems involving fractional ordinary differential equations. AMS Subject Classification: 34A08 Keywords and Phrases: Chebyshev polynomials, Gauss-Lobatto points, fractional differential equation, finite difference 1. Introduction The idea of a derivative which interpolates between the familiar integer order derivatives was introduced many years ago and has gained increasing importance only in recent years due to the development of mathematical models of a certain situations in engineering, materials science, control theory, polymer modelling etc. For example see [20, 22, 25, 26]. Most fractional order differential equations describing real life situations, in general do not have exact analytical solutions. Several numerical and approximate analytical methods for ordinary differential equation Received: December 2014; Accepted: March 2015 57 Journal of Mathematical Extension Vol. 9, No. 3, (2015, 57-71 ISSN: 1735-8299 URL: http://www.ijmex.com Chebyshev Finite Difference Method for Fractional Boundary Value Problems H. Azizi Taft Branch, Islamic Azad University Abstract. This paper presents a numerical method for fractional differential equations using Chebyshev finite difference method. The fractional derivative

  5. THE STRUCTURE AND YIELD LEVEL OF SWEET CORN DEPENDING ON THE TYPE OF WINTER CATCH CROPS AND WEED CONTROL METHOD

    Directory of Open Access Journals (Sweden)

    Robert Rosa

    2014-10-01

    Full Text Available Organic manuring is suggested to be necessary in sweet corn cultivation. It is not always possible to use farmyard manure due to economic, production or technical reasons. Catch crops used as green manures can be an alternative source of organic matter. The experiment was carried out in central-east Poland (52°06’N, 22°55’E, in years 2008–2011. The successive effect of winter catch crops (hairy vetch, white clover, winter rye, Italian ryegrass, winter turnip rape and the type of weed control on the growth and yielding of sweet corn was examined. The catch crops were sown in early September, incorporated in early May. The effect of the winter catch crops on yield was compared to the effect of FYM at a rate of 30 t·ha-1 and the control without organic manuring. The sweet corn was grown directly after organic fertilization. Three methods of weed control was used: Hw – hand weeding, twice during the growing period, GCM – herbicide Guardian CompleteMix 664 SE, immediately after sowing the seed corn, Z+T – a mixture of herbicides Zeagran 340 SE + Titus 25 WG, in the 3–4 leaf stage sweet corn. The highest yields of biomass were found for winter rye (35.5 t·ha-1 FM and 7.3 t·ha-1 DM, the most of macroelements accumulated winter turnip rape (480.2 kg N+P+K+Ca+Mg·ha-1. Generally, leguminous catch crops had similar to the FYM and better than non-leguminous catch crops yield-forming effect. The highest yield of marketable ears of sweet corn was obtained after FYM (14.4 t·ha-1 and after hairy vetch catch crop (14.0 t·ha-1. A similar yield-forming effect also had white clover and Italian ryegrass. The most of ears from 1 ha was achieved after white clover catch crop (59.3 tausend, similar after FYM and hairy vetch catch crop. The highest kernel yields were found after FYM (10.7 t·ha-1. The yields of kernel after hairy vetch and white clover catch crops were significantly higher than after non-leguminous catch crops. Z+T weed control

  6. SCS-CN based time-distributed sediment yield model

    Science.gov (United States)

    Tyagi, J. V.; Mishra, S. K.; Singh, Ranvir; Singh, V. P.

    2008-05-01

    SummaryA sediment yield model is developed to estimate the temporal rates of sediment yield from rainfall events on natural watersheds. The model utilizes the SCS-CN based infiltration model for computation of rainfall-excess rate, and the SCS-CN-inspired proportionality concept for computation of sediment-excess. For computation of sedimentographs, the sediment-excess is routed to the watershed outlet using a single linear reservoir technique. Analytical development of the model shows the ratio of the potential maximum erosion (A) to the potential maximum retention (S) of the SCS-CN method is constant for a watershed. The model is calibrated and validated on a number of events using the data of seven watersheds from India and the USA. Representative values of the A/S ratio computed for the watersheds from calibration are used for the validation of the model. The encouraging results of the proposed simple four parameter model exhibit its potential in field application.

  7. A method to define breeding goals for sustainable dairy cattle production.

    Science.gov (United States)

    Nielsen, H M; Christensen, L G; Odegård, J

    2006-09-01

    The objective of this study was to present a method to define breeding goals for sustainable dairy cattle production by adding nonmarket values to market economic values for functional traits in the breeding goal. A nonmarket value can represent the value of improved animal welfare or societal influences for animal production. The nonmarket value for mastitis resistance, conception rate, and stillbirth were derived based on how much farmers or breeding companies were willing to lose in selection response for milk yield to improve functional traits. The desired response for milk yield corresponding to a given percent loss was obtained using desired gain indices. By allowing a 5% loss in the selection response for milk yield, the nonmarket value was found to be 40.4 euro for mastitis resistance, 16.1 euro for conception rate, and 9.7 euro for stillbirth. The nonmarket value increased proportionally with increasing loss in the selection response for milk yield, but the selection response was lower for conception rate than for mastitis resistance because of differences in market economic value and heritability. To increase the response for conception rate, the nonmarket value was also derived for 2 situations, in which the desired responses for milk yield, mastitis resistance, and conception rate were specified. The method can be used to define breeding goals for sustainable production and to increase the response for traits that are at critically low levels. When defining breeding goals for sustainable production, breeding organizations should predict the selection response based on market economic value and add non-market value for traits with unacceptable selection responses.

  8. New method for protecting mine roadways in thin coal seams by means of prefabricated yielding blocks

    Energy Technology Data Exchange (ETDEWEB)

    Peknik, J

    1983-05-01

    The use of concrete blocks for strata control in mine roadways driven in thin coal seams is evaluated. Two types of prefabricated blocks are used: BZT blocks made of reinforced concrete and yielding elements or popilbet blocks made of a mixture of fly ash (from coal power plants) and concrete. When the popilbet blocks were used no yielding elements were necessary. Mechanical properties of blocks made of reinforced concrete were controlled by yielding elements. Mechanical properties (compression strength) of the popilbet blocks were controlled by proportion of water, cement and fly ash. The BZT and the popilbet blocks were used for strata control in mine roadways in coal seams from 60 to 80 cm thick and dip angle from 5 to 18 degrees. Use of the BZT and the popilbet blocks reduced roadway deformation by about 50% in comparison to traditional strata control methods (timber cribbings, use of waste rock, etc.). Use of the blocks is explained. The BZT and the popilbet blocks were placed in a roadway wall. Height of the block wall equaled coal seam thickness. Yielding arched steel supports and timber liners were used for strata control in the roadway. The popilbet blocks were 50% less expensive than the BZT blocks. 9 references

  9. Apparent diffusion coefficient measurement in glioma: Influence of region-of-interest determination methods on apparent diffusion coefficient values, interobserver variability, time efficiency, and diagnostic ability.

    Science.gov (United States)

    Han, Xu; Suo, Shiteng; Sun, Yawen; Zu, Jinyan; Qu, Jianxun; Zhou, Yan; Chen, Zengai; Xu, Jianrong

    2017-03-01

    To compare four methods of region-of-interest (ROI) placement for apparent diffusion coefficient (ADC) measurements in distinguishing low-grade gliomas (LGGs) from high-grade gliomas (HGGs). Two independent readers measured ADC parameters using four ROI methods (single-slice [single-round, five-round and freehand] and whole-volume) on 43 patients (20 LGGs, 23 HGGs) who had undergone 3.0 Tesla diffusion-weighted imaging and time required for each method of ADC measurements was recorded. Intraclass correlation coefficients (ICCs) were used to assess interobserver variability of ADC measurements. Mean and minimum ADC values and time required were compared using paired Student's t-tests. All ADC parameters (mean/minimum ADC values of three single-slice methods, mean/minimum/standard deviation/skewness/kurtosis/the10 th and 25 th percentiles/median/maximum of whole-volume method) were correlated with tumor grade (low versus high) by unpaired Student's t-tests. Discriminative ability was determined by receiver operating characteristic curves. All ADC measurements except minimum, skewness, and kurtosis of whole-volume ROI differed significantly between LGGs and HGGs (all P determination methods. Whole-volume histogram analysis did not yield better results than single-slice methods and took longer. Mean ADC value derived from single-round ROI is the most optimal parameter for differentiating LGGs from HGGs. 3 J. Magn. Reson. Imaging 2017;45:722-730. © 2016 International Society for Magnetic Resonance in Medicine.

  10. Satellite-based assessment of grassland yields

    Science.gov (United States)

    Grant, K.; Siegmund, R.; Wagner, M.; Hartmann, S.

    2015-04-01

    Cutting date and frequency are important parameters determining grassland yields in addition to the effects of weather, soil conditions, plant composition and fertilisation. Because accurate and area-wide data of grassland yields are currently not available, cutting frequency can be used to estimate yields. In this project, a method to detect cutting dates via surface changes in radar images is developed. The combination of this method with a grassland yield model will result in more reliable and regional-wide numbers of grassland yields. For the test-phase of the monitoring project, a study area situated southeast of Munich, Germany, was chosen due to its high density of managed grassland. For determining grassland cutting robust amplitude change detection techniques are used evaluating radar amplitude or backscatter statistics before and after the cutting event. CosmoSkyMed and Sentinel-1A data were analysed. All detected cuts were verified according to in-situ measurements recorded in a GIS database. Although the SAR systems had various acquisition geometries, the amount of detected grassland cut was quite similar. Of 154 tested grassland plots, covering in total 436 ha, 116 and 111 cuts were detected using CosmoSkyMed and Sentinel-1A radar data, respectively. Further improvement of radar data processes as well as additional analyses with higher sample number and wider land surface coverage will follow for optimisation of the method and for validation and generalisation of the results of this feasibility study. The automation of this method will than allow for an area-wide and cost efficient cutting date detection service improving grassland yield models.

  11. SYNTHESIS METHODS OF ALGEBRAIC NORMAL FORM OF MANY-VALUED LOGIC FUNCTIONS

    Directory of Open Access Journals (Sweden)

    A. V. Sokolov

    2016-01-01

    Full Text Available The rapid development of methods of error-correcting coding, cryptography, and signal synthesis theory based on the principles of many-valued logic determines the need for a more detailed study of the forms of representation of functions of many-valued logic. In particular the algebraic normal form of Boolean functions, also known as Zhegalkin polynomial, that well describe many of the cryptographic properties of Boolean functions is widely used. In this article, we formalized the notion of algebraic normal form for many-valued logic functions. We developed a fast method of synthesis of algebraic normal form of 3-functions and 5-functions that work similarly to the Reed-Muller transform for Boolean functions: on the basis of recurrently synthesized transform matrices. We propose the hypothesis, which determines the rules of the synthesis of these matrices for the transformation from the truth table to the coefficients of the algebraic normal form and the inverse transform for any given number of variables of 3-functions or 5-functions. The article also introduces the definition of algebraic degree of nonlinearity of the functions of many-valued logic and the S-box, based on the principles of many-valued logic. Thus, the methods of synthesis of algebraic normal form of 3-functions applied to the known construction of recurrent synthesis of S-boxes of length N = 3k, whereby their algebraic degrees of nonlinearity are computed. The results could be the basis for further theoretical research and practical applications such as: the development of new cryptographic primitives, error-correcting codes, algorithms of data compression, signal structures, and algorithms of block and stream encryption, all based on the perspective principles of many-valued logic. In addition, the fast method of synthesis of algebraic normal form of many-valued logic functions is the basis for their software and hardware implementation.

  12. Method and apparatus for determining the dose value of neutrons

    International Nuclear Information System (INIS)

    Burgkhardt, B.; Piesch, E.

    1976-01-01

    A method is provided for determining the dose value of neutrons leaving a body as thermal and intermediate neutrons after having been scattered in the body. A first dose value of thermal and intermediate neutrons is detected on the surface of the body by means of a first detector for neutrons which is shielded against thermal and intermediate neutrons not emerging from the body. A second detector is used to measure a second dose value of the thermal and intermediate neutrons not emerging from the body. A first correction factor based on the first and second values is obtained from a calibration diagram and is applied to the first dose value to determine a first corrected first dose value. 21 Claims, 6 Drawing Figures

  13. Study on the Method of Grass Yield Model in the Source Region of Three Rivers with Multivariate Data

    International Nuclear Information System (INIS)

    You, Haoyan; Luo, Chengfeng; Liu, Zhengjun; Wang, Jiao

    2014-01-01

    This paper uses remote sensing and GIS technology to analyse the Source Region of Three Rivers (SRTR) to establish a grass yield estimation model during 2010 with remote sensing data, meteorological data, grassland type data and ground measured data. Analysis of the correlation between ground measured data, vegetation index based HJ-1A/B satellite data, meteorological data and grassland type data were used to establish the grass yield model. The grass yield model was studied by several statistical methods, such as multiple linear regression and Geographically Weighted Regression (GWR). The model's precision was validated. Finally, the best model to estimate the grass yield of Maduo County in SRTR was contrasted with the TM degraded grassland interpretation image of Maduo County from 2009. The result shows that: (1) Comparing with the multiple linear regression model, the GWR model gave a much better fitting result with the quality of fit increasing significantly from less than 0.3 to more than 0.8; (2) The most sensitive factors affecting the grass yield in SRTR were precipitation from May to August and drought index from May to August. From calculation of the five vegetation indices, MSAVI fitted the best; (3) The Maduo County grass yield estimated by the optimal model was consistent with the TM degraded grassland interpretation image, the spatial distribution of grass yield in Maduo County for 2010 showed a ''high south and low north'' pattern

  14. Effect of Planting Date and Weed Control Methods on Yield and Agronomic Traits of Sunflower (Helianthus annuus L. in Khoy Region

    Directory of Open Access Journals (Sweden)

    M. Akbari

    2010-12-01

    Full Text Available Effects of planting dates and weed control methods on yield and agronomic traits of sunflower was investigated. A factorial experiment based on a complete randomized blocks design with four replications was conducted in 2009. Treatments consisted of three planting date (April 4th, May5th and Juns5th and five weed control methods, Trifluralin (2 Lit/ha + Fokus (1.5 Lit/ha, Trifluralin+Nabu-s (3Lit/ha, Trifluralin, Hand weeding and without control. Results indicated that planting dates and weed control methods significantly affected head diameter, 100 grain weight, seed number per head and grain yield. Harvest index and oil percent was affected only by planting dates. The highest grain yield (630.1 g/m2, was produced in the second planting date (May 5 by using Trifluralin+Fokus. Delaying sowing date (after May 5 significantly decreased grain yield. The most important weeds in the experimental site were common lambsquarter (Chenopodium album, field bind weed (Convolvulus arvensis, bastard cabbage (Rapistrum rugosum, flower-of-an-hour (Hibiscus trionum, cockspur grass (Echinochloa colorum and green bristle grass (Setaria verticillata. It was observed that the dry matter weight sharply varied in all weed species in different planting dates, that is, in the 4th April the dry matter production of common lambsquarter and bastard cabbage, in June 5th planting date were maximum. Dry matter of broad leaf and narrow leaf weeds in the date of May 5th was lower than the other two planting dates. The interaction of planting date ×control methods on head diameter, seed number per head, grain yield and weeds dry matter was significant.

  15. Housing Value Forecasting Based on Machine Learning Methods

    Directory of Open Access Journals (Sweden)

    Jingyi Mu

    2014-01-01

    Full Text Available In the era of big data, many urgent issues to tackle in all walks of life all can be solved via big data technique. Compared with the Internet, economy, industry, and aerospace fields, the application of big data in the area of architecture is relatively few. In this paper, on the basis of the actual data, the values of Boston suburb houses are forecast by several machine learning methods. According to the predictions, the government and developers can make decisions about whether developing the real estate on corresponding regions or not. In this paper, support vector machine (SVM, least squares support vector machine (LSSVM, and partial least squares (PLS methods are used to forecast the home values. And these algorithms are compared according to the predicted results. Experiment shows that although the data set exists serious nonlinearity, the experiment result also show SVM and LSSVM methods are superior to PLS on dealing with the problem of nonlinearity. The global optimal solution can be found and best forecasting effect can be achieved by SVM because of solving a quadratic programming problem. In this paper, the different computation efficiencies of the algorithms are compared according to the computing times of relevant algorithms.

  16. The Reliability, Impact, and Cost-Effectiveness of Value-Added Teacher Assessment Methods

    Science.gov (United States)

    Yeh, Stuart S.

    2012-01-01

    This article reviews evidence regarding the intertemporal reliability of teacher rankings based on value-added methods. Value-added methods exhibit low reliability, yet are broadly supported by prominent educational researchers and are increasingly being used to evaluate and fire teachers. The article then presents a cost-effectiveness analysis…

  17. Comparing Value of Urban Green Space Using Contingent Valuation and Travel Cost Methods

    Science.gov (United States)

    Chintantya, Dea; Maryono

    2018-02-01

    Green urban open space are an important element of the city. They gives multiple benefits for social life, human health, biodiversity, air quality, carbon sequestration, and water management. Travel Cost Method (TCM) and Contingent Valuation Method (CVM) are the most frequently used method in various studies that assess environmental good and services in monetary term for valuing urban green space. Both of those method are determined the value of urban green space through willingness to pay (WTP) for ecosystem benefit and collected data through direct interview and questionnaire. Findings of this study showed the weaknesses and strengths of both methods for valuing urban green space and provided factors influencing the probability of user's willingness to pay in each method.

  18. NIF total neutron yield diagnostic

    International Nuclear Information System (INIS)

    Cooper, Gary W.; Ruiz, Carlos L.

    2001-01-01

    We have designed a total neutron yield diagnostic for the National Ignition Facility (NIF) which is based on the activation of In and Cu samples. The particular approach that we have chosen is one in which we calibrate the entire counting system and which we call the ''F factor'' method. In this method, In and/or Cu samples are exposed to known sources of DD and DT neutrons. The activated samples are then counted with an appropriate system: a high purity Ge detector for In and a NaI coincidence system for Cu. We can then calculate a calibration factor, which relates measured activity to total neutron yield. The advantage of this approach is that specific knowledge of such quantities as cross sections and detector efficiencies is not needed. Unless the actual scattering environment of the NIF can be mocked up in the calibration experiment, the F factor will have to be modified using the results of a numerical simulation of the NIF scattering environment. In this article, the calibration factor methodology will be discussed and experimental results for the calibration factors will be presented. Total NIF neutron yields of 10 9 --10 19 can be measured with this method assuming a 50 cm stand-off distance can be employed for the lower yields

  19. Role of np fertilizer under different application methods on seed yield of sunflower

    International Nuclear Information System (INIS)

    Khan, R.U.; Khan, R.A.; Khan, R.A.; Muendal, H.

    2007-01-01

    The effects of different application methods of nitrogen and phophorus fertilizers were studied on the sunflower hybrid NK-212 during spring and kharif seasons at National Agricultural Research Centre, Islamabad. Nitrogen and phosphorus were applied at the rate 90 and 60 kg P 2 degree 5 ha-1 in a different proportions i.e. all broadcast and disked, 3/4 broadcast disked + 1/4 side banded, 1/2 broadcast disked + 1/2 side banded, 1/4 broadcast disked + 3/4 side banded and all side banded. Fertilizer applied in equal proportions of side banded and broadcast at the time of planting gave maximum (1525 and 1348 kg ha-1) seed yield and largest (14.3 cm and 10.15 cm) head diameter of sunflower in spring seasons during (1987 and 1988), and seed yield of 1206 kg ha-1 and 11.0 cm head diameter during kharif 1987. A significant increase in the 1000 seed weight was also observed in all the treatments receiving different split applications of N and P over all broadcast applied fertilizer. Plant height was not increased by split applications, with lowest height to be associated with most side banding of fertilizers. (author)

  20. Prediction of Breeding Values for Dairy Cattle Using Artificial Neural Networks and Neuro-Fuzzy Systems

    Directory of Open Access Journals (Sweden)

    Saleh Shahinfar

    2012-01-01

    Full Text Available Developing machine learning and soft computing techniques has provided many opportunities for researchers to establish new analytical methods in different areas of science. The objective of this study is to investigate the potential of two types of intelligent learning methods, artificial neural networks and neuro-fuzzy systems, in order to estimate breeding values (EBV of Iranian dairy cattle. Initially, the breeding values of lactating Holstein cows for milk and fat yield were estimated using conventional best linear unbiased prediction (BLUP with an animal model. Once that was established, a multilayer perceptron was used to build ANN to predict breeding values from the performance data of selection candidates. Subsequently, fuzzy logic was used to form an NFS, a hybrid intelligent system that was implemented via a local linear model tree algorithm. For milk yield the correlations between EBV and EBV predicted by the ANN and NFS were 0.92 and 0.93, respectively. Corresponding correlations for fat yield were 0.93 and 0.93, respectively. Correlations between multitrait predictions of EBVs for milk and fat yield when predicted simultaneously by ANN were 0.93 and 0.93, respectively, whereas corresponding correlations with reference EBV for multitrait NFS were 0.94 and 0.95, respectively, for milk and fat production.

  1. A Covariance Generation Methodology for Fission Product Yields

    Directory of Open Access Journals (Sweden)

    Terranova N.

    2016-01-01

    Full Text Available Recent safety and economical concerns for modern nuclear reactor applications have fed an outstanding interest in basic nuclear data evaluation improvement and completion. It has been immediately clear that the accuracy of our predictive simulation models was strongly affected by our knowledge on input data. Therefore strong efforts have been made to improve nuclear data and to generate complete and reliable uncertainty information able to yield proper uncertainty propagation on integral reactor parameters. Since in modern nuclear data banks (such as JEFF-3.1.1 and ENDF/BVII.1 no correlations for fission yields are given, in the present work we propose a covariance generation methodology for fission product yields. The main goal is to reproduce the existing European library and to add covariance information to allow proper uncertainty propagation in depletion and decay heat calculations. To do so, we adopted the Generalized Least Square Method (GLSM implemented in CONRAD (COde for Nuclear Reaction Analysis and Data assimilation, developed at CEA-Cadarache. Theoretical values employed in the Bayesian parameter adjustment are delivered thanks to a convolution of different models, representing several quantities in fission yield calculations: the Brosa fission modes for pre-neutron mass distribution, a simplified Gaussian model for prompt neutron emission probability, theWahl systematics for charge distribution and the Madland-England model for the isomeric ratio. Some results will be presented for the thermal fission of U-235, Pu-239 and Pu-241.

  2. The Effect of Irrigation Intervals and Arbuscular Mycorrhizal Fungi on Chlorophyll Index, Yield and Yield Components of Grain Sorghum

    Directory of Open Access Journals (Sweden)

    J. Hamzei

    2014-08-01

    Full Text Available This experiment was carried out to study the effect of irrigation intervals and arbuscular mycorrhizal fungi on chlorophyll index, yield and yield components of grain sorghum. A factorial experiment was done based on randomized complete block design (RCBD with three replications at the Agriculture Research Station faculty of Agriculture, Bu- Ali Sina University in growing season of 2011. Irrigation intervals (7, 14 and 21 days with three levels of seed inoculation (control without inoculation, inoculation with Glomus mossea and inoculation with G. intraradices were the experimental treatments. Results indicated that the effect of irrigation intervals and mycorrhizal fungi were significant for traits of chlorophyll index, percentage of root symbiosis (PRS, number of grain per panicle, 1000 seed weight, grain yield and harvest index (HI. Maximum value for each trait was observed at G. mossea treatment. G. mossea treatment in comparison with G. intraradices and control treatment can increase the grain yield of sorghum up to 6.80 and 23.10%, respectively. Also, with increasing irrigation interval from 7 to 21 days, PRS increased up to 27.9%. Maximum value for grain yield (755 g m-2 was achieved at irrigation every 14 days and application of G. mossea treatment. But, there was no significant difference between irrigation sorghum plants every 14 days and application of G. mossea and irrigation every 7 days and application of either G. mossea or G. intraradices. In general, irrigation of sorghum plants every 14 days and supplying of G. mossea can produce the highest grain yield, while decreasing water consumption for sorghum production.

  3. Microbial environmental contamination in Italian dental clinics: A multicenter study yielding recommendations for standardized sampling methods and threshold values.

    Science.gov (United States)

    Pasquarella, Cesira; Veronesi, Licia; Napoli, Christian; Castiglia, Paolo; Liguori, Giorgio; Rizzetto, Rolando; Torre, Ida; Righi, Elena; Farruggia, Patrizia; Tesauro, Marina; Torregrossa, Maria V; Montagna, Maria T; Colucci, Maria E; Gallè, Francesca; Masia, Maria D; Strohmenger, Laura; Bergomi, Margherita; Tinteri, Carola; Panico, Manuela; Pennino, Francesca; Cannova, Lucia; Tanzi, Marialuisa

    2012-03-15

    A microbiological environmental investigation was carried out in ten dental clinics in Italy. Microbial contamination of water, air and surfaces was assessed in each clinic during the five working days, for one week per month, for a three-month period. Water and surfaces were sampled before and after clinical activity; air was sampled before, after, and during clinical activity. A wide variation was found in microbial environmental contamination, both within the participating clinics and for the different sampling times. Before clinical activity, microbial water contamination in tap water reached 51,200cfu/mL (colony forming units per milliliter), and that in Dental Unit Water Systems (DUWSs) reached 872,000cfu/mL. After clinical activity, there was a significant decrease in the Total Viable Count (TVC) in tap water and in DUWSs. Pseudomonas aeruginosa was found in 2.38% (7/294) of tap water samples and in 20.06% (59/294) of DUWS samples; Legionella spp. was found in 29.96% (89/297) of tap water samples and 15.82% (47/297) of DUWS samples, with no significant difference between pre- and post-clinical activity. Microbial air contamination was highest during dental treatments, and decreased significantly at the end of the working activity (p<0.05). The microbial buildup on surfaces increased significantly during the working hours. This study provides data for the establishment of standardized sampling methods, and threshold values for contamination monitoring in dentistry. Some very critical situations have been observed which require urgent intervention. Furthermore, the study emphasizes the need for research aimed at defining effective managing strategies for dental clinics. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. TODIM Method for Single-Valued Neutrosophic Multiple Attribute Decision Making

    Directory of Open Access Journals (Sweden)

    Dong-Sheng Xu

    2017-10-01

    Full Text Available Recently, the TODIM has been used to solve multiple attribute decision making (MADM problems. The single-valued neutrosophic sets (SVNSs are useful tools to depict the uncertainty of the MADM. In this paper, we will extend the TODIM method to the MADM with the single-valued neutrosophic numbers (SVNNs. Firstly, the definition, comparison, and distance of SVNNs are briefly presented, and the steps of the classical TODIM method for MADM problems are introduced. Then, the extended classical TODIM method is proposed to deal with MADM problems with the SVNNs, and its significant characteristic is that it can fully consider the decision makers’ bounded rationality which is a real action in decision making. Furthermore, we extend the proposed model to interval neutrosophic sets (INSs. Finally, a numerical example is proposed.

  5. Quantitative Genetic Analysis for Yield and Yield Components in Boro Rice (Oryza sativa L.

    Directory of Open Access Journals (Sweden)

    Supriyo CHAKRABORTY

    2010-03-01

    Full Text Available Twenty-nine genotypes of boro rice (Oryza sativa L. were grown in a randomized block design with three replications in plots of 4m x 1m with a crop geometry of 20 cm x 20 cm between November-April, in Regional Agricultural Research Station, Nagaon, India. Quantitative data were collected on five randomly selected plants of each genotype per replication for yield/plant, and six other yield components, namely plant height, panicles/plant, panicle length, effective grains/panicle, 100 grain weight and harvest index. Mean values of the characters for each genotype were used for analysis of variance and covariance to obtain information on genotypic and phenotypic correlation along with coheritability between two characters. Path analyses were carried out to estimate the direct and indirect effects of boro rice�s yield components. The objective of the study was to identify the characters that mostly influence the yield for increasing boro rice productivity through breeding program. Correlation analysis revealed significant positive genotypic correlation of yield/plant with plant height (0.21, panicles/plant (0.53, panicle length (0.53, effective grains/panicle (0.57 and harvest index (0.86. Path analysis based on genotypic correlation coefficients elucidated high positive direct effect of harvest index (0.8631, panicle length (0.2560 and 100 grain weight (0.1632 on yield/plant with a residual effect of 0.33. Plant height and panicles/plant recorded high positive indirect effect on yield/plant via harvest index whereas effective grains/panicle on yield/plant via harvest index and panicle length. Results of the present study suggested that five component characters, namely harvest index, effective grains/plant, panicle length, panicles/plant and plant height influenced the yield of boro rice. A genotype with higher magnitude of these component characters could be either selected from the existing genotypes or evolved by breeding program for genetic

  6. 'What the patient wants': an investigation of the methods of ascertaining patient values in evidence-based medicine and values-based practice.

    Science.gov (United States)

    Wieten, Sarah

    2018-02-01

    Evidence-Based Medicine (EBM), Values-Based Practice (VBP) and Person-Centered Healthcare (PCH) are all concerned with the values in play in the clinical encounter. However, these recent movements are not in agreement about how to discover these relevant values. In some parts of EBM textbooks, the prescribed method for discovering values is through social science research on the average values in a particular population. VBP by contrast always investigates the individually held values of the different stakeholders in the particular clinical encounter, although the account has some other difficulties. I argue that although average values for populations might be very useful in informing questions of resource distribution and policy making, their use cannot replace the individual solicitation of patient (and other stakeholder) values in the clinical encounter. Because of the inconsistency of the EBM stance on values, the incompatibility of some versions of the EBM treatment of values with PCH, and EBM's attempt to transplant research methods from science into the realm of values, I must recommend the use of the VBP account of values discovery. © 2015 John Wiley & Sons, Ltd.

  7. Comparing Value of Urban Green Space Using Contingent Valuation and Travel Cost Methods

    Directory of Open Access Journals (Sweden)

    Chintantya Dea

    2018-01-01

    Full Text Available Green urban open space are an important element of the city. They gives multiple benefits for social life, human health, biodiversity, air quality, carbon sequestration, and water management. Travel Cost Method (TCM and Contingent Valuation Method (CVM are the most frequently used method in various studies that assess environmental good and services in monetary term for valuing urban green space. Both of those method are determined the value of urban green space through willingness to pay (WTP for ecosystem benefit and collected data through direct interview and questionnaire. Findings of this study showed the weaknesses and strengths of both methods for valuing urban green space and provided factors influencing the probability of user’s willingness to pay in each method.

  8. Impact of post-processing methods on apparent diffusion coefficient values

    Energy Technology Data Exchange (ETDEWEB)

    Zeilinger, Martin Georg; Lell, Michael; Uder, Michael [University of Erlangen-Nuremberg, Institute of Diagnostic Radiology, Erlangen (Germany); Baltzer, Pascal Andreas Thomas [Medical University Vienna, Department of Radiology and Nuclear Medicine, Vienna (Austria); Doerfler, Arnd; Dietzel, Matthias [University of Erlangen-Nuremberg, Department of Neuroradiology, Erlangen (Germany)

    2017-03-15

    The apparent diffusion coefficient (ADC) is increasingly used as a quantitative biomarker in oncological imaging. ADC calculation is based on raw diffusion-weighted imaging (DWI) data, and multiple post-processing methods (PPMs) have been proposed for this purpose. We investigated whether PPM has an impact on final ADC values. Sixty-five lesions scanned with a standardized whole-body DWI-protocol at 3 T served as input data (EPI-DWI, b-values: 50, 400 and 800 s/mm{sup 2}). Using exactly the same ROI coordinates, four different PPM (ADC{sub 1}-ADC{sub 4}) were executed to calculate corresponding ADC values, given as [10{sup -3} mm{sup 2}/s] of each lesion. Statistical analysis was performed to intra-individually compare ADC values stratified by PPM (Wilcoxon signed-rank tests: α = 1 %; descriptive statistics; relative difference/∇; coefficient of variation/CV). Stratified by PPM, mean ADCs ranged from 1.136-1.206 *10{sup -3} mm{sup 2}/s (∇ = 7.0 %). Variances between PPM were pronounced in the upper range of ADC values (maximum: 2.540-2.763 10{sup -3} mm{sup 2}/s, ∇ = 8 %). Pairwise comparisons identified significant differences between all PPM (P ≤ 0.003; mean CV = 7.2 %) and reached 0.137 *10{sup -3} mm{sup 2}/s within the 25th-75th percentile. Altering the PPM had a significant impact on the ADC value. This should be considered if ADC values from different post-processing methods are compared in patient studies. (orig.)

  9. Vineyard Yield Estimation Based on the Analysis of High Resolution Images Obtained with Artificial Illumination at Night

    Directory of Open Access Journals (Sweden)

    Davinia Font

    2015-04-01

    Full Text Available This paper presents a method for vineyard yield estimation based on the analysis of high-resolution images obtained with artificial illumination at night. First, this paper assesses different pixel-based segmentation methods in order to detect reddish grapes: threshold based, Mahalanobis distance, Bayesian classifier, linear color model segmentation and histogram segmentation, in order to obtain the best estimation of the area of the clusters of grapes in this illumination conditions. The color spaces tested were the original RGB and the Hue-Saturation-Value (HSV. The best segmentation method in the case of a non-occluded reddish table-grape variety was the threshold segmentation applied to the H layer, with an estimation error in the area of 13.55%, improved up to 10.01% by morphological filtering. Secondly, after segmentation, two procedures for yield estimation based on a previous calibration procedure have been proposed: (1 the number of pixels corresponding to a cluster of grapes is computed and converted directly into a yield estimate; and (2 the area of a cluster of grapes is converted into a volume by means of a solid of revolution, and this volume is converted into a yield estimate; the yield errors obtained were 16% and −17%, respectively.

  10. Reflections on the added value of using mixed methods in the SCAPE study.

    Science.gov (United States)

    Murphy, Kathy; Casey, Dympna; Devane, Declan; Meskell, Pauline; Higgins, Agnes; Elliot, Naomi; Lalor, Joan; Begley, Cecily

    2014-03-01

    To reflect on the added value that a mixed method design gave in a large national evaluation study of specialist and advanced practice (SCAPE), and to propose a reporting guide that could help make explicit the added value of mixed methods in other studies. Recently, researchers have focused on how to carry out mixed methods research (MMR) rigorously. The value-added claims for MMR include the capacity to exploit the strengths and compensate for weakness inherent in single designs, generate comprehensive description of phenomena, produce more convincing results for funders or policy-makers and build methodological expertise. Data illustrating value added claims were drawn from the SCAPE study. Studies about the purpose of mixed methods were identified from a search of literature. The authors explain why and how they undertook components of the study, and propose a guideline to facilitate such studies. If MMR is to become the third methodological paradigm, then articulation of what extra benefit MMR adds to a study is essential. The authors conclude that MMR has added value and found the guideline useful as a way of making value claims explicit. The clear articulation of the procedural aspects of mixed-methods research, and identification of a guideline to facilitate such research, will enable researchers to learn more effectively from each other.

  11. Value assessment for reservoir recovery optimization

    International Nuclear Information System (INIS)

    Saito, R.; De Castro, G.N.; Mezzomo, C.; Schiozer, D.J.

    2001-01-01

    This paper analyzes the managerial flexibility embedded in oil and gas exploration and production. The analysis includes the economic impact of using different production techniques on the valuation of oil reserves. Two methodologies are used to evaluate the simulation of engineering techniques: (1) the real option approach; and (2) the discounted cash flow (DCF) method. Given the external variables (e.g., oil price, interest rate), this paper evaluates the best engineering technique for oil recovery by using a valuation approach. We conclude that by appropriately combining different production techniques, the value of oil reserves can increase under the real option approach and can be higher than the value assessed under the DCF method. Since oil recovery includes many managerial choices, we argue that the real option approach is more appropriate than the DCF method. The paper concludes that concession time and dividend yield are the most sensitive parameters for the valuation of oil reserves

  12. Value assessment for reservoir recovery optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saito, R.; De Castro, G.N. [EAESP/FGV, Av. Nove de Julho, 2029-10 andar, 01313-902, SP Sao Paulo (Brazil); Mezzomo, C.; Schiozer, D.J. [Fundacao Getulio Vargas, Avenida Nove de Julho, 2029, 10th floor, 01313-902, SP Sao Paulo (Brazil)

    2001-12-29

    This paper analyzes the managerial flexibility embedded in oil and gas exploration and production. The analysis includes the economic impact of using different production techniques on the valuation of oil reserves. Two methodologies are used to evaluate the simulation of engineering techniques: (1) the real option approach; and (2) the discounted cash flow (DCF) method. Given the external variables (e.g., oil price, interest rate), this paper evaluates the best engineering technique for oil recovery by using a valuation approach. We conclude that by appropriately combining different production techniques, the value of oil reserves can increase under the real option approach and can be higher than the value assessed under the DCF method. Since oil recovery includes many managerial choices, we argue that the real option approach is more appropriate than the DCF method. The paper concludes that concession time and dividend yield are the most sensitive parameters for the valuation of oil reserves.

  13. Accuracy of genomic selection for alfalfa biomass yield in different reference populations.

    Science.gov (United States)

    Annicchiarico, Paolo; Nazzicari, Nelson; Li, Xuehui; Wei, Yanling; Pecetti, Luciano; Brummer, E Charles

    2015-12-01

    Genomic selection based on genotyping-by-sequencing (GBS) data could accelerate alfalfa yield gains, if it displayed moderate ability to predict parent breeding values. Its interest would be enhanced by predicting ability also for germplasm/reference populations other than those for which it was defined. Predicting accuracy may be influenced by statistical models, SNP calling procedures and missing data imputation strategies. Landrace and variety material from two genetically-contrasting reference populations, i.e., 124 elite genotypes adapted to the Po Valley (sub-continental climate; PV population) and 154 genotypes adapted to Mediterranean-climate environments (Me population), were genotyped by GBS and phenotyped in separate environments for dry matter yield of their dense-planted half-sib progenies. Both populations showed no sub-population genetic structure. Predictive accuracy was higher by joint rather than separate SNP calling for the two data sets, and using random forest imputation of missing data. Highest accuracy was obtained using Support Vector Regression (SVR) for PV, and Ridge Regression BLUP and SVR for Me germplasm. Bayesian methods (Bayes A, Bayes B and Bayesian Lasso) tended to be less accurate. Random Forest Regression was the least accurate model. Accuracy attained about 0.35 for Me in the range of 0.30-0.50 missing data, and 0.32 for PV at 0.50 missing data, using at least 10,000 SNP markers. Cross-population predictions based on a smaller subset of common SNPs implied a relative loss of accuracy of about 25% for Me and 30% for PV. Genome-wide association analyses based on large subsets of M. truncatula-aligned markers revealed many SNPs with modest association with yield, and some genome areas hosting putative QTLs. A comparison of genomic vs. conventional selection for parent breeding value assuming 1-year vs. 5-year selection cycles, respectively, indicated over three-fold greater predicted yield gain per unit time for genomic selection

  14. VALUE - Validating and Integrating Downscaling Methods for Climate Change Research

    Science.gov (United States)

    Maraun, Douglas; Widmann, Martin; Benestad, Rasmus; Kotlarski, Sven; Huth, Radan; Hertig, Elke; Wibig, Joanna; Gutierrez, Jose

    2013-04-01

    Our understanding of global climate change is mainly based on General Circulation Models (GCMs) with a relatively coarse resolution. Since climate change impacts are mainly experienced on regional scales, high-resolution climate change scenarios need to be derived from GCM simulations by downscaling. Several projects have been carried out over the last years to validate the performance of statistical and dynamical downscaling, yet several aspects have not been systematically addressed: variability on sub-daily, decadal and longer time-scales, extreme events, spatial variability and inter-variable relationships. Different downscaling approaches such as dynamical downscaling, statistical downscaling and bias correction approaches have not been systematically compared. Furthermore, collaboration between different communities, in particular regional climate modellers, statistical downscalers and statisticians has been limited. To address these gaps, the EU Cooperation in Science and Technology (COST) action VALUE (www.value-cost.eu) has been brought into life. VALUE is a research network with participants from currently 23 European countries running from 2012 to 2015. Its main aim is to systematically validate and develop downscaling methods for climate change research in order to improve regional climate change scenarios for use in climate impact studies. Inspired by the co-design idea of the international research initiative "future earth", stakeholders of climate change information have been involved in the definition of research questions to be addressed and are actively participating in the network. The key idea of VALUE is to identify the relevant weather and climate characteristics required as input for a wide range of impact models and to define an open framework to systematically validate these characteristics. Based on a range of benchmark data sets, in principle every downscaling method can be validated and compared with competing methods. The results of

  15. Effects of heterosis for yield and yield components obtained by crossing divergent alfalfa populations

    Directory of Open Access Journals (Sweden)

    Katić Slobodan

    2010-01-01

    Full Text Available When breeding alfalfa for yield performance, it is necessary to use high-yielding parents obtained by different breeding methods. The assumption at the onset of this research was that crossing highest-yielding domestic cultivars with divergent populations from geographically distant breeding centers could result in the expression of heterotic effects in their hybrids contributing to increased alfalfa yield. The objective of this study was to determine yield and yield components and heterotic effects in hybrid progenies obtained by crossing the domestic cultivars NS Banat ZMS II and NS Mediana ZMS V with the cultivars Pella, Dolichi and Hyliki from Greece, UMSS 2001 from Bolivia and Jogeva 118 from Estonia in two series. The field trial planted in 2006, included 13 F1 hybrids and 6 of 7 initial parents in both series. Heterotic effects for yields of forage and hay were observed in 4 combinations (C NS Banat ZMS II x E Hyliki; C NS Banat ZMS II x E UMSS 2001; C NS Mediana ZMS V x E Hyliki; C NS Mediana ZMS V x E Dolichi. The populations that exhibited heterosis in a set of crossings are recommended for use as parent components for development of high-yielding synthetic alfalfa cultivars. .

  16. Simulating maize yield and bomass with spatial variability of soil field capacity

    Science.gov (United States)

    Ma, Liwang; Ahuja, Lajpat; Trout, Thomas; Nolan, Bernard T.; Malone, Robert W.

    2015-01-01

    Spatial variability in field soil properties is a challenge for system modelers who use single representative values, such as means, for model inputs, rather than their distributions. In this study, the root zone water quality model (RZWQM2) was first calibrated for 4 yr of maize (Zea mays L.) data at six irrigation levels in northern Colorado and then used to study spatial variability of soil field capacity (FC) estimated in 96 plots on maize yield and biomass. The best results were obtained when the crop parameters were fitted along with FCs, with a root mean squared error (RMSE) of 354 kg ha–1 for yield and 1202 kg ha–1 for biomass. When running the model using each of the 96 sets of field-estimated FC values, instead of calibrating FCs, the average simulated yield and biomass from the 96 runs were close to measured values with a RMSE of 376 kg ha–1 for yield and 1504 kg ha–1 for biomass. When an average of the 96 FC values for each soil layer was used, simulated yield and biomass were also acceptable with a RMSE of 438 kg ha–1 for yield and 1627 kg ha–1 for biomass. Therefore, when there are large numbers of FC measurements, an average value might be sufficient for model inputs. However, when the ranges of FC measurements were known for each soil layer, a sampled distribution of FCs using the Latin hypercube sampling (LHS) might be used for model inputs.

  17. Effect of different tillage intensity on yields and yield-forming factors in winter wheat

    Directory of Open Access Journals (Sweden)

    Martin Houšť

    2012-01-01

    Full Text Available The paper presents results of a study on application of minimum tillage technologies when growing winter wheat. Experiments were performed in the sugar-beet-growing region with loamy chernozem within the period of 2005–2009. Aanalysed and evaluated were effects of different methods of soil processing on yield-forming factors in stands of winter wheat grown after three different preceding crops (i.e. alfalfa, maize for silage and pea. Evaluated were the following four variants of tillage: (1 conventional ploughing to the depth of 0.22 m (Variant 1; (2 ploughing to the depth of 0.15 m (Variant 2; (3 direct sowing into the untilled soil (Variant 3, and (4 shallow tillage to the depth of 0.10 m (Variant 4.The effect of different tillage intensity on winter wheat yields was statistically non-significant after all forecrops. After alfalfa, the highest and the lowest average yields were recorded in Variant 2 (i.e. with ploughing to the depth of 0.15 m and Variant 3 (direct sowing into the untilled soil, respectively. After maize grown for silage, higher yields were obtained in Variant 2 and Variant 1 (conventional ploughing while in Variants 4 and 3 the obtained yields were lower. When growing winter wheat after pea as a preceding crop, the highest and the lowest average yields were recorded after direct sowing (Variant 3 and in Variant 1 (i.e. ploughing to the depth of 0.22 m, respectively. Results of studies on effect of different tillage technologies on yields of winter wheat crops indicate that under the given pedological and climatic conditions it is possible to apply methods of reduced tillage intensity. However, the choice of the corresponding technology must be performed with regard to the type of preceding crop.

  18. Effect of fertilization methods on growth of pear trees, yielding and fruit quality

    Directory of Open Access Journals (Sweden)

    Tomasz Lipa

    2013-04-01

    Full Text Available The experiment was carried out in the commercial orchard near Lublin on five-year old pear trees of two cultivars: ‘Conference’and ‘Lukasowka’, planted on Quince MA. The objective of the study was evaluated the reaction of pear on the method of application of fertilizers. In the early spring the surface broadcasting of fertilizers was used (N – 71,5 kg, P 2O5 – 33,0 kg, K 2 O – 114,0 kg and from the May to the middle of August the fertigation was applied (N – 76,4 kg, P 2O5 – 49,5 kg, K 2 O – 84,2 kg. Method of fertilizer’s applications had no significant effect on the growth of evaluated trees. There were no differences in quantity of yield in dependence on the method of fertilization. In the case of cv. ‘Lukasowka’the beneficial influence of the way of fertilization on morphology of fruits (their diameter, height and mass was stated. Such an effect was not observed in the case of the ‘Conference’.

  19. Application of Monte Carlo method to solving boundary value problem of differential equations

    International Nuclear Information System (INIS)

    Zuo Yinghong; Wang Jianguo

    2012-01-01

    This paper introduces the foundation of the Monte Carlo method and the way how to generate the random numbers. Based on the basic thought of the Monte Carlo method and finite differential method, the stochastic model for solving the boundary value problem of differential equations is built. To investigate the application of the Monte Carlo method to solving the boundary value problem of differential equations, the model is used to solve Laplace's equations with the first boundary condition and the unsteady heat transfer equation with initial values and boundary conditions. The results show that the boundary value problem of differential equations can be effectively solved with the Monte Carlo method, and the differential equations with initial condition can also be calculated by using a stochastic probability model which is based on the time-domain finite differential equations. Both the simulation results and theoretical analyses show that the errors of numerical results are lowered as the number of simulation particles is increased. (authors)

  20. Application of He's variational iteration method to the fifth-order boundary value problems

    International Nuclear Information System (INIS)

    Shen, S

    2008-01-01

    Variational iteration method is introduced to solve the fifth-order boundary value problems. This method provides an efficient approach to solve this type of problems without discretization and the computation of the Adomian polynomials. Numerical results demonstrate that this method is a promising and powerful tool for solving the fifth-order boundary value problems

  1. Valuing companies by cash flow discounting: Ten methods and nine theories

    OpenAIRE

    Fernández , Pablo

    2002-01-01

    This paper is a summarized compendium of all the methods and theories on company valuation using cash flow discounting. The paper shows the ten most commonly used methods for valuing companies by cash flow discounting: 1) free cash flow discounted at the WACC; 2) equity cash flows discounted at the required return to equity; 3) capital cash flows discounted at the WACC before tax; 4) APV (Adjusted Present Value); 5) the business's risk-adjusted free cash flows discounted at the required retur...

  2. The gap values in the profile matching method by fuzzy logic

    Science.gov (United States)

    Sitepu, S. A.; Efendi, S.; Situmorang, Z.

    2018-03-01

    In this research, the determination of the appropriate values of Gap for the assessment of promotion criteria of position in an institution / company. In this study the authors use Fuzzy Sugeno logic on the determination of Gap values used in Profile Matching method. Test results of 5 employees obtained the eligibility of promotion with the position of Z* values between in 3.20 to 4.11.

  3. Measurement of the fission yields of selected prompt and decay fission product gamma-rays of spontaneously fissioning 252Cf and 244Cm

    International Nuclear Information System (INIS)

    Reber, E.L.; Gehrke, R.J.; Aryaeinejad, R.; Hartwell, J.K.

    2005-01-01

    Gamma-ray spectrometry measurements have been made of the fission yields of selected γ -rays emitted by the spontaneously fissioning isotopes 252 Cf and 244 Cm. The measured γ-rays were selected based on their relative abundance in the spectrum and their freedom from interference or, in a few instances, ease of interference correction. From these data and the cumulative and independent yield data of England and Rider, those γ-rays that are primarily produced by radioactive decay, as opposed to direct yield, were converted into the decays per spontaneous fission expressed in percent and compared to cumulative yield values of England and Rider. For those γ-rays whose production is dominated by direct (independent) yield, the ratio of γ-rays per spontaneous fission is reported. The γ-ray yield can be compared to the independent yield values of England and Rider when 100% of the direct feeding passes through the γ-ray. In those cases where both cumulative and independent yields contribute to the observed γ-ray emission rate, a direct comparison is not possible but a method to quantify the contribution from each is proposed. (author)

  4. On a new method to determine the yield stress in lubricating grease

    NARCIS (Netherlands)

    Cyriac, F.; Lugt, Pieter Martin; Bosman, Rob

    2015-01-01

    An experimental study using both a controlled stress and a controlled strain rheometer has been undertaken to characterize lubricating grease in shear, creep, stress relaxation, and oscillatory flow, with a main focus on determining the yield stress. The yield stress was examined using a cone–plate

  5. Calculation of forces arising from impacting projectiles upon yielding structures

    International Nuclear Information System (INIS)

    Drittler, K.; Gruner, P.; Krivy, J.

    1977-01-01

    Calculations concerning the impact of airplanes upon nuclear power plant buildings usually imply that the building 'acts' as a rigid target. This assumption is justified for considerations concerning the structural integrity of the building being hit. However, for investigating induced vibrations of components within the structure, this approach might -in general- be too conservative. It is expected, that yielding of the structure during impact reduces the peak values of the loads and changes the temporal behavior of the load function which is obtained for a rigid target. To calculate the changes of the load function which are due to deformations of the structure, Riera's method is extended for the case of a yielding target. In view of the applications of the calculations to the impact of airplanes upon buildings which are constructed to withstand loads of this kind without serious damage and without large deformations, it is possible to simplify the calculations to some extent. That is, the investigations need not take into account in detail the behavior of the target during impact. The calculations are performed with a one-dimensional model for the projectile. The direction of impact is perpendicular to the target surface; direction of impact and projectile axis coincide. The calculations were performed for several initial velocities of the projectiles simulating a fast flying military airplane. Variations of the peak values of the load functions as compared to corresponding values for a rigid target do not exceed about 10%. The overall temporal behavior of the load curves turns out to be not very sensitive to the yielding of the target, though, in some cases displacements in time of the peak positions within a single load curve do arise

  6. Evaluation of the Effect of Different Irrigation Levels of Drip Irrigation (Tape on Yield and Yield Components of Corn

    Directory of Open Access Journals (Sweden)

    mohammad karimi

    2016-02-01

    Full Text Available Introduction: One of the serious problems in the further development of maize cultivation is increasing irrigation efficiency. Using conventional irrigation causes a shortage of water resources to increase the acreage of the crop. With regard to the development of maize cultivation, agronomic and executable methods must be studied to reduce water consumption. Using drip irrigation system is most suitable for row crops. Hamedi et al. (2005 compared drip (tape and surface irrigation systems on yield of maize in different levels of water requirement and indicated that drip irrigation increases the amount of yield to 2015 kg/ha and water use efficiency to 3 time. Kohi et al. (2005 investigated the effects of deficit irrigation use of drip (tape irrigation on water use efficiency on maize in planting of one and two rows. The results showed that maximum water use efficiency related to crop density, water requirement and planting pattern 85000, 125% and two rows, respectively with 1.46 kg/m3. Jafari and Ashrafi (2011 studied the effects of irrigation levels, plant density and planting pattern in drip irrigation (tape on corn. The results showed that the amount of irrigation water and crop density on the level of 1% and their interactions and method of planting were significant at the 5 and 10% on water use efficiency, respectively. The yield was measured under different levels of irrigation, crop density and method of planting and the difference was significant on the level of 1%. Lamm et al. (1995 studied water requirement of maize in field with silt loam texture under sub drip irrigation and reported that water use reduced to 75%; but yield of maize remained at maximum amount of 12.5 t/ha. The objective of this study was to evaluate the drip (tape irrigation method for corn production practices in the Qazvin province in Iran. Materials and Methods: In this study, yield and yield components of corn (SC 704 were investigated under different levels of

  7. Crop yield estimation in 2014 for Vojvodina using methods of remote sensing

    Directory of Open Access Journals (Sweden)

    Jovanović Dušan

    2014-01-01

    Full Text Available Monitoring phenology of crops and yield estimate based on vegetation indices as well as other parameters such as temperature or amount of rainfall were largely reported in literature. In this research, MODIS Normalized Difference Vegetation Index (NDVI was used as an indicator of specific crop condition; the other parameter was Land Surface Temperature (LST which can indicate the amount of crop moisture. Trial years were 2011, 2012, and 2013. For those years sowing structure was acquired from agricultural organizations Nova Budućnost from Žarkovac and Sava Kovačević from Vrbas, both in Serbia. Also, satellite images with high and medium resolution for these areas and years were available. Multiple linear regression was used for crop yield estimate for Vojvodina Province, Serbia where the NDVI and LST were independent variables and the average yield for specific crop was the dependent variable. The results of crop yield estimate two months before harvest are presented (excluding wheat.

  8. Evaluation of Columbia, USMARC Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: VII. Accuracy of ultrasound predictors and their association with carcass weight, yield, and value.

    Science.gov (United States)

    Notter, D R; Mousel, M R; Leeds, T D; Zerby, H N; Moeller, S J; Lewis, G S; Taylor, J B

    2014-06-01

    Use of lamb BW or chilled carcass weights (CCW), live-animal ultrasound or direct carcass measurements of backfat thickness (BF; mm) and LM area (LMA; cm(2)), and carcass body wall thickness (BWall; mm) to predict carcass yield and value was evaluated using 512 crossbred lambs produced over 3 yr by mating Columbia, U.S. Meat Animal Research Center Composite, Suffolk, and Texel rams to adult Rambouillet ewes. Lambs were harvested at 3 BW endpoints within each year. The predictive value of 3 to 5 additional linear measurements of live-animal or carcass size and shape was also evaluated. Residual correlations (adjusted for effects of year, breed, and harvest group) between ultrasound and direct measurements were 0.69 for BF and 0.65 for LMA. Increasing ultrasound or carcass LMA had positive effects (P carcass (i.e., on dressing percentage) and, at comparable CCW, on weight of high-value cuts (rack, loin, leg, and sirloin) before trimming (HVW), weight of trimmed high-value cuts (trimmed rack and loin and trimmed boneless leg and sirloin; TrHVW), and carcass value before (CVal) and after (TrCVal) trimming of high-value cuts. By contrast, ultrasound and direct measures of BF had positive effects on yields of CCW and on HVW and CVal but large negative effects on TrHVW and TrCVal. After adjusting for BW at scanning, increases of 1 mm in ultrasound BF or 1 cm(2) in ultrasound LMA were associated with changes of US$-0.32 (P Carcass BWall was generally superior to carcass BF as a predictor of TrHVW and TrCVal. Carcass LMA was superior to ultrasound LMA but carcass BF was inferior to ultrasound BF for prediction of carcass yield and value. Increasing LMA thus would be expected to improve carcass yield and value. Addition of linear measurements of live-animal or carcass size and shape to the prediction model reduced residual SD (RSD) for TrHVW and TrCVal by 0.4 to 2.2%, but subsequent removal of ultrasound or direct measures of BF and LMA from the prediction model increased

  9. Optimal yield value of a collector in a vacuum thermoemission energy converter

    Energy Technology Data Exchange (ETDEWEB)

    Bulyga, A.V.

    1977-01-01

    An analytical expression is formulated for determining the optimal height of a potential barrier which limits electron yield from a collector across the near-collector region of the inter-electrode interval of a vacuum thermoemission energy converter. The analysis is based on the concept that thermoemission properties of the emitter are independent of changes in load resistance in which case the resistance of the conducting wires was considered to be given.

  10. Photofission observations in reactor environments using selected fission-product yields

    International Nuclear Information System (INIS)

    Gold, R.; Ruddy, F.H.; Roberts, J.H.

    1982-01-01

    A new method for the observation of photofission in reactor environments is advanced. It is based on the in-situ observation of fission product yield. In fact, at a given in-situ reactor location, the fission product yield is simply a weighted linear combination of the photofission product yield, Y/sub gamma/, and the neutron induced fission product yield, Y/sub n. The weight factors arising in this linear combination are the photofission fraction and neutron induced fission fraction, respectively. This method can be readily implemented with established techniques for measuring in-situ reactor fission product yield. For example, one can use the method based on simultaneous irradiation of radiometric (RM) and solid state track recorder (SSTR) fission monitors. The sensitivity and accuracy and current knowledge of fission product yields. Unique advantages of this method for reactor applications are emphasized

  11. Effects of surface and subsurface drip irrigation regimes with saline water on yield and water use efficiency of potato in arid conditions of Tunisia

    Directory of Open Access Journals (Sweden)

    Fathia El Mokh

    2014-12-01

    Full Text Available Field experiments were conducted on a sandy soil during spring of 2009 and autumn of 2010 in southern Tunisia for evaluating the effects of two drip irrigation methods and three irrigation regimes on soil moisture and salinity, yield and water use efficiency of potato (Solanum tuberosum L.. The surface drip (SDI and subsurface drip (SSDI irrigation methods were used. Irrigation regimes consisted in replacement of cumulated ETc when readily available water is depleted with levels of 100% (FI100, 60% (DI60 and 30% (DI30. FI100 was considered as full irrigation while DI60 and DI30 were considered as deficit irrigation regimes. Well water with an ECi of 7.0 dS/m was used for irrigation. Findings are globally consistent between the two experiments. Results show that soil moisture content and salinity were significantly affected by irrigation treatments and methods. Higher soil moisture content and lower soil salinity were maintained with SSDI than SDI for all irrigation treatments. For both irrigation methods, higher salinity and lower moisture content in the root zone are observed under DI60 and DI30 treatments compared to FI100. Potato yields were highest over two cropping periods for the SSDI method although no significant differences were observed with the SDI. Irrigation regimes resulted in significant difference in both irrigation methods on yield and its components. Yields were highest under FI100. Compared to FI100, considerable reductions in potato yields were observed under DI60 and DI30 deficit treatments resulting from a reduction in tubers number/m² and average tuber weight and size. Water use efficiency (WUE was found to vary significantly among irrigation methods and treatments and varied between 5.9 and 20.5 kg/m3. WUE of SSDI method had generally higher values than SDI. The lowest WUE values were observed for the FI100 treatment, while the highest values were obtained under DI30 treatment for both methods. SSDI method provides

  12. genotype by environment interaction and grain yield stability

    African Journals Online (AJOL)

    Preferred Customer

    among environments, GXE interaction and Interaction Principal Component Analysis (IPCA-I) but ... value closer to zero, Genotype Selection Index (GSI) of 4 each and AMMI stability value (ASV) of 0.124 and. 0.087 ..... Analysis of variance for grain yield using Additive Mean Effect and Multiple Interactions (AMMI) model.

  13. Using NDVI and guided sampling to develop yield prediction maps of processing tomato crop

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, A.; Henar Prieto, M. del; García-Martín, A.; Córdoba, A.; Martínez, L.; Campillo, C.

    2015-07-01

    The use of yield prediction maps is an important tool for the delineation of within-field management zones. Vegetation indices based on crop reflectance are of potential use in the attainment of this objective. There are different types of vegetation indices based on crop reflectance, the most commonly used of which is the NDVI (normalized difference vegetation index). NDVI values are reported to have good correlation with several vegetation parameters including the ability to predict yield. The field research was conducted in two commercial farms of processing tomato crop, Cantillana and Enviciados. An NDVI prediction map developed through ordinary kriging technique was used for guided sampling of processing tomato yield. Yield was studied and related with NDVI, and finally a prediction map of crop yield for the entire plot was generated using two geostatistical methodologies (ordinary and regression kriging). Finally, a comparison was made between the yield obtained at validation points and the yield values according to the prediction maps. The most precise yield maps were obtained with the regression kriging methodology with RRMSE values of 14% and 17% in Cantillana and Enviciados, respectively, using the NDVI as predictor. The coefficient of correlation between NDVI and yield was correlated in the point samples taken in the two locations, with values of 0.71 and 0.67 in Cantillana and Enviciados, respectively. The results suggest that the use of a massive sampling parameter such as NDVI is a good indicator of the distribution of within-field yield variation. (Author)

  14. The Effects of Drought Stress on Yield, Yield Components and Anti-oxidant of Two Garlic (Allium sativum L. Ecotypes with Different Planting Densities

    Directory of Open Access Journals (Sweden)

    shiva akbari

    2016-07-01

    Full Text Available Introduction Drought stress reduces plant growth by affecting various physiological and biochemical processes, such as photosynthesis, respiration, translocation, ion uptake, carbohydrates, nutrient metabolism and growth promoters. Garlic (Allium sativum L. is an annual bulb crop that has been cultivated since ancient times and was used as a spice and condiment for many centuries. Garlic is an important plant because of its pharmaceutical properties. The optimum yield of this bulb crop depends on well-managed irrigation, fertilization and cultivation practices. In the final and middle stages of growth, garlic is sensitive to water stress and low irrigation is unsuitable in these stages. This experiment was established to study the influence of drought stress and planting density on yield and its components and the non-enzymatic anti-oxidant content of two different garlic ecotypes. Materials and methods This study was conducted in 2011-2012 in a farmland at the south east of Semnan city. The experimental layout was a split-plot factorial with a randomized complete block design with three replications. The treatments were comprised of three factors: irrigation rates (60%, 80% and 100% of estimated crop evapotranspiration (ETC as the main plot and the factorial combination of three levels of planting density (30, 40 and 50 plants.m-2 and two ecotypes (Tabas and Toroud as the sub-plots. To estimate the crop water requirement, different meteorological parameters were collected from Semnan weather station and were used based on FAO-56 water irrigation calculation instructions. After harvesting, ten garlic plants were sampled randomly in each plot and bulb yield components were measured. To calculate the leaves anti-oxidant content, DPPH method was used. The statistical significances of mean values were assessed by analysis of variance and LSD tests at p≤0.05. All calculations were performed using SAS and Mstat-C softwares. Results and discussion

  15. Algal Pretreatment Improves Biofuels Yield and Value; Highlights in Science, NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-05-15

    One of the major challenges associated with algal biofuels production in a biorefinery-type setting is improving biomass utilization in its entirety, increasing the process energetic yields and providing economically viable and scalable co-product concepts. We demonstrate the effectiveness of a novel, integrated technology based on moderate temperatures and low pH to convert the carbohydrates in wet algal biomass to soluble sugars for fermentation, while making lipids more accessible for downstream extraction and leaving a protein-enriched fraction behind. This research has been highlighted in the Green Chemistry journal article mentioned above and a milestone report, and is based on the work the researchers are doing for the AOP projects Algal Biomass Conversion and Algal Biofuels Techno-economic Analysis. That work has demonstrated an advanced process for algal biofuel production that captures the value of both the algal lipids and carbohydrates for conversion to biofuels.  With this process, as much as 150 GGE/ton of biomass can be produced, 2-3X more than can be produced by terrestrial feedstocks.  This can also reduce the cost of biofuel production by as much as 40%. This also represents the first ever design case for the algal lipid upgrading pathway.

  16. The evaluation for reference fission yield of 238U fission

    International Nuclear Information System (INIS)

    Liang Qichang; Liu Tingjin

    1998-01-01

    In the fission yield data evaluation and measurement, the reference yield is very important, good or poor recommended or measurement values depend upon the reference data to a great extent. According to the CRP's requirement, the evaluation of reference fission yields have been and will be carried out in CNDC, as a part of the whole work (contract No.9504/R 0 /Regular Budget Fund), the evaluation for 29 reference fission yields of 15 product nuclides from 238 U fission have been completed

  17. Determining the Most Important Soil Properties Affecting the Yield of Saffron in the Ghayenat Area

    Directory of Open Access Journals (Sweden)

    amir ranjbar

    2016-02-01

    , among the 21 studied properties, 7 out of them including calcium, iron, zinc contents, sand, calcium carbonate equivalent percent, mean weight diameter of aggregates (MWD and manganese (Mn had the higher Eigenvalues. Therefore, the above properties were introduced as the most important soil properties in saffron fields. Calcium carbonate had the negative effect on the availability of micro-nutrients (26. Christensen et al. (15 found that by increasing the calcium carbonate in soil due to high pH and formation of insoluble components, the uptake of micro-nutrients is especially limited. The results of stepwise regression method (equation 1 showed that soil acidity (pH, zinc content, bulk density, MWD, iron content, salinity (EC, organic carbon and available potassium in soil were the most important properties that affect the yield of saffron, so that the determination coefficient (R2 of the regression model was high (Table 2 and it can explain 74% of the variation of saffron yield. Y = 6924.51 – 1187.31 pH – 89.65 EC + 71.6 Fe – 826.02 Zn + 471.55 OC, + 5490.96 K + 1353.56 BD + 752.82 MWD (1 where Y: saffron yield (kgha-1, pH: soil acidity, EC: electoral conductivity (dSm-1, Fe: iron concentration (mgkg-1, Zn: zinc concentration (mgkg-1, OC: organic carbon (%, K: soil potassium (%, BD: soil bulk density (Mgm-3, and MWD: mean weight diameter of aggregates (MM. Based on the absolute values of standard ß in the regression model (Table 3, pH value and then after Zn concentration had the most effect on saffron yield. In general, responses of different plants to soil pH is varied, and saffron grows satisfactory in pH = 7.8 (5. Soil pH influences the uptake of soil nutrients by plants (15, so that this parameter had the most effect on saffron yield and by increasing the soil pH, the yield of saffron decreases. According to the regression model, Zn concentration was the second parameter in saffron yield. Zn has the important role in structure of plant enzymes (30. After

  18. Identification of the corporate values of an enterprise: theory, approaches, methodic

    Directory of Open Access Journals (Sweden)

    Kozlov Vladimir Aleksandrovich

    2015-07-01

    Full Text Available This article focuses on research and composition of the instrument to identify the corporate values of the enterprise and practical activities to support them. The first part based on theoretical evidence of essence and correlation between notions of ‘Corporate culture’ and ‘Corporate values’. The method of corporate values identification, based on indirect approach, is proposed and the examples are provided. The results of implemented project for corporate values identification at industrial enterprise are presented. For further support the tasks and activities for corporate values management are proposed.

  19. Active Teaching Methods: Personal Experience of Integrating Spiritual and Moral Values

    Science.gov (United States)

    Kasim, Tengku Sarina Aini Tengku; Yusoff, Yusmini Md

    2014-01-01

    Islamic education has always recognized spiritual and moral values as significant elements in developing a "balanced" human being. One way of demonstrating spiritual and moral concepts is through effective teaching methods that integrate and forefront these values. This article offers an investigation of how the authors' teaching…

  20. Factor Analysis, AMMI Stability Value (ASV Parameter and GGE Bi-Plot Graphical Method of Quantitative and Qualitative Traits in Potato Genotypes

    Directory of Open Access Journals (Sweden)

    Davood Hassanpanah

    2016-10-01

    Full Text Available Quantitative and qualitative traits and stability of marketable tuber yield of 14 promising potato clones, along with three commercial cultivars (Agria, Marfona and Savalan as checks, were evaluated at the Ardabil Agricultural and Natural Resources Research Station during 2013 and 2014. The experiment was based on a randomized complete block design with four replications. During growing period and after harvest, traits like main stem number per plant, plant height, tuber number and weight per plant, total and marketable tuber yield, dry matter percentage, baking type, hollow heart, tuber inner ring and discoloration of raw tuber flesh after 24 hours were measured. Combined ANONA for quantitative traits showed that there were significant differences among promising clones as to total and marketable tuber yield, tuber number and weight per plant, plant height, tuber mean weight, main stem number per plant and dry matter percentage and their interactions with year in total and marketable tuber yield. The clone 9 (397078-3 with the least amount of marketable tuber yield had significant difference with clones 4 (397045-13, 1 (397031-16, 3 (397031-11, 6 (397009-8 and 12 (397067-6 in 2013 and with clone 4 (397045-13 and Agria cultivar in 2014. The clones 4(397045-13, 1 (397031-16 and 12 (397067-6 had uniform tuber, yellow to dark-yellow skin and light-yellow to yellow flesh color, tuber shape of oval round and round, shallow to mid shallow eyes, no tuber inner ring, hollow heart and tuber inner crack and mid-late maturity. They were selected for home consumption of chips, french-fries and frying. Based on the results of factor analysis, "tuber yield", "number of tuber" and "plant structural and quality "were named as first, second and third quality determining factors respectively. In this experiment, GGE Bi-plot model and AMMI Stability Value (ASV parameter, were acceptable methods for the selection of marketable tuber yield stability which found to

  1. A point-value enhanced finite volume method based on approximate delta functions

    Science.gov (United States)

    Xuan, Li-Jun; Majdalani, Joseph

    2018-02-01

    We revisit the concept of an approximate delta function (ADF), introduced by Huynh (2011) [1], in the form of a finite-order polynomial that holds identical integral properties to the Dirac delta function when used in conjunction with a finite-order polynomial integrand over a finite domain. We show that the use of generic ADF polynomials can be effective at recovering and generalizing several high-order methods, including Taylor-based and nodal-based Discontinuous Galerkin methods, as well as the Correction Procedure via Reconstruction. Based on the ADF concept, we then proceed to formulate a Point-value enhanced Finite Volume (PFV) method, which stores and updates the cell-averaged values inside each element as well as the unknown quantities and, if needed, their derivatives on nodal points. The sharing of nodal information with surrounding elements saves the number of degrees of freedom compared to other compact methods at the same order. To ensure conservation, cell-averaged values are updated using an identical approach to that adopted in the finite volume method. Here, the updating of nodal values and their derivatives is achieved through an ADF concept that leverages all of the elements within the domain of integration that share the same nodal point. The resulting scheme is shown to be very stable at successively increasing orders. Both accuracy and stability of the PFV method are verified using a Fourier analysis and through applications to the linear wave and nonlinear Burgers' equations in one-dimensional space.

  2. Neutron yield from thick lead target by the action of high-energy electrons

    International Nuclear Information System (INIS)

    Noga, V.I.; Ranyuk, Yu.N.; Telegin, Yu.N.; Sorokin, P.V.

    1978-01-01

    The results are presented of studying the complete neutron yield from a lead target bombarded by high-energy electrons. Neutrons were recorded by the method of radio-active indicators. The dependence of the neutron yield on the target thickness varying from 0.2 to 8 cm was obtained at the energies of electrons of 230 and 1200 MeV. The neutron yield for the given energies with the target of 6 cm in thickness is in the range of saturation and is 0.1 +-0.03 and 0.65+-0.22 (neutr./MeV.el.), respectively. The neutron angular distributions were measured for different thicknesses of targets at the 201, 230 and 1200 MeV electrons. Within the error limits the angular distributions are isotropic. The dependence of neutron yield on the electron energy was examined for a 3 cm thick target. In the energy range of 100-1200 MeV these values are related by a linear dependence with the proportionality coefficient C=3x10 -4 (neutr./MeV.el.)

  3. Salience Assignment for Multiple-Instance Data and Its Application to Crop Yield Prediction

    Science.gov (United States)

    Wagstaff, Kiri L.; Lane, Terran

    2010-01-01

    An algorithm was developed to generate crop yield predictions from orbital remote sensing observations, by analyzing thousands of pixels per county and the associated historical crop yield data for those counties. The algorithm determines which pixels contain which crop. Since each known yield value is associated with thousands of individual pixels, this is a multiple instance learning problem. Because individual crop growth is related to the resulting yield, this relationship has been leveraged to identify pixels that are individually related to corn, wheat, cotton, and soybean yield. Those that have the strongest relationship to a given crop s yield values are most likely to contain fields with that crop. Remote sensing time series data (a new observation every 8 days) was examined for each pixel, which contains information for that pixel s growth curve, peak greenness, and other relevant features. An alternating-projection (AP) technique was used to first estimate the "salience" of each pixel, with respect to the given target (crop yield), and then those estimates were used to build a regression model that relates input data (remote sensing observations) to the target. This is achieved by constructing an exemplar for each crop in each county that is a weighted average of all the pixels within the county; the pixels are weighted according to the salience values. The new regression model estimate then informs the next estimate of the salience values. By iterating between these two steps, the algorithm converges to a stable estimate of both the salience of each pixel and the regression model. The salience values indicate which pixels are most relevant to each crop under consideration.

  4. Analysis of Appraising Agricultural Intangible Asset Value by Cost Method

    OpenAIRE

    Li, Xiao-Juan

    2010-01-01

    On the basis of describing the connotation of agricultural intangible asset and cost method, the technical ideas of appraising by cost method are introduced. The article analyzes the advantages (simple appraisal principle and easy to understand and grasp; overall consideration of various factors related to appraisal result value) and disadvantages (high appraisal cost; difficult to appraise and grasp various appraisal factors) of appraising by cost method. The article also summarizes the prec...

  5. Using NOAA/AVHRR based remote sensing data and PCR method for estimation of Aus rice yield in Bangladesh

    Science.gov (United States)

    Nizamuddin, Mohammad; Akhand, Kawsar; Roytman, Leonid; Kogan, Felix; Goldberg, Mitch

    2015-06-01

    Rice is a dominant food crop of Bangladesh accounting about 75 percent of agricultural land use for rice cultivation and currently Bangladesh is the world's fourth largest rice producing country. Rice provides about two-third of total calorie supply and about one-half of the agricultural GDP and one-sixth of the national income in Bangladesh. Aus is one of the main rice varieties in Bangladesh. Crop production, especially rice, the main food staple, is the most susceptible to climate change and variability. Any change in climate will, thus, increase uncertainty regarding rice production as climate is major cause year-to-year variability in rice productivity. This paper shows the application of remote sensing data for estimating Aus rice yield in Bangladesh using official statistics of rice yield with real time acquired satellite data from Advanced Very High Resolution Radiometer (AVHRR) sensor and Principal Component Regression (PCR) method was used to construct a model. The simulated result was compared with official agricultural statistics showing that the error of estimation of Aus rice yield was less than 10%. Remote sensing, therefore, is a valuable tool for estimating crop yields well in advance of harvest, and at a low cost.

  6. Enhanced yield of phenolic extracts from banana peels (Musa acuminata Colla AAA) and cinnamon barks (Cinnamomum varum) and their antioxidative potentials in fish oil.

    Science.gov (United States)

    Anal, Anil Kumar; Jaisanti, Sirorat; Noomhorm, Athapol

    2014-10-01

    The bioactive compounds of banana peels and cinnamon barks were extracted by vacuum microwave and ultrasonic-assisted extraction methods at pre-determined temperatures and times. These methods enhance the yield extracts in shorter time. The highest yields of both extracts were obtained from the conditions which employed the highest temperature and the longest time. The extracts' yield from cinnamon bark method was higher by ultrasonic than vacuum microwave method, while vacuum microwave method gave higher extraction yield from banana peel than ultrasonic method. The phenolic contents of cinnamon bark and banana peel extracts were 467 and 35 mg gallic acid equivalent/g extract, respectively. The flavonoid content found in banana peel and cinnamon bark extracts were 196 and 428 mg/g quercetin equivalent, respectively. In addition, it was found that cinnamon bark gave higher 2,2-Diphenyl-1-1 picryhydrazyl (DPPH) radical scavenging activity and total antioxidant activity (TAA). The antioxidant activity of the extracts was analyzed by measuring the peroxide and p-anisidine values after oxidation of fish oils, stored for a month (30 days) at 25 °C and showed lesser peroxide and p-anisidine values in the fish oils containing the sample extracts in comparison to the fish oil without containing any extract. The banana peel and cinnamon extracts had shown the ability as antioxidants to prevent the oxidation of fish oil and might be considered as rich sources of natural antioxidant.

  7. A method for in situ absolute DD yield calibration of neutron time-of-flight detectors on OMEGA using CR-39-based proton detectors

    Energy Technology Data Exchange (ETDEWEB)

    Waugh, C. J., E-mail: cjwaugh@mit.edu; Zylstra, A. B.; Frenje, J. A.; Séguin, F. H.; Petrasso, R. D. [Plasma Science and Fusion Center, MIT, Cambridge, Massachusetts 02139 (United States); Rosenberg, M. J.; Glebov, V. Yu.; Sangster, T. C.; Stoeckl, C. [Laboratory for Laser Energetics, Rochester, New York 14623 (United States)

    2015-05-15

    Neutron time of flight (nTOF) detectors are used routinely to measure the absolute DD neutron yield at OMEGA. To check the DD yield calibration of these detectors, originally calibrated using indium activation systems, which in turn were cross-calibrated to NOVA nTOF detectors in the early 1990s, a direct in situ calibration method using CR-39 range filter proton detectors has been successfully developed. By measuring DD neutron and proton yields from a series of exploding pusher implosions at OMEGA, a yield calibration coefficient of 1.09 ± 0.02 (relative to the previous coefficient) was determined for the 3m nTOF detector. In addition, comparison of these and other shots indicates that significant reduction in charged particle flux anisotropies is achieved when bang time occurs significantly (on the order of 500 ps) after the trailing edge of the laser pulse. This is an important observation as the main source of the yield calibration error is due to particle anisotropies caused by field effects. The results indicate that the CR-39-nTOF in situ calibration method can serve as a valuable technique for calibrating and reducing the uncertainty in the DD absolute yield calibration of nTOF detector systems on OMEGA, the National Ignition Facility, and laser megajoule.

  8. A method for in situ absolute DD yield calibration of neutron time-of-flight detectors on OMEGA using CR-39-based proton detectors.

    Science.gov (United States)

    Waugh, C J; Rosenberg, M J; Zylstra, A B; Frenje, J A; Séguin, F H; Petrasso, R D; Glebov, V Yu; Sangster, T C; Stoeckl, C

    2015-05-01

    Neutron time of flight (nTOF) detectors are used routinely to measure the absolute DD neutron yield at OMEGA. To check the DD yield calibration of these detectors, originally calibrated using indium activation systems, which in turn were cross-calibrated to NOVA nTOF detectors in the early 1990s, a direct in situ calibration method using CR-39 range filter proton detectors has been successfully developed. By measuring DD neutron and proton yields from a series of exploding pusher implosions at OMEGA, a yield calibration coefficient of 1.09 ± 0.02 (relative to the previous coefficient) was determined for the 3m nTOF detector. In addition, comparison of these and other shots indicates that significant reduction in charged particle flux anisotropies is achieved when bang time occurs significantly (on the order of 500 ps) after the trailing edge of the laser pulse. This is an important observation as the main source of the yield calibration error is due to particle anisotropies caused by field effects. The results indicate that the CR-39-nTOF in situ calibration method can serve as a valuable technique for calibrating and reducing the uncertainty in the DD absolute yield calibration of nTOF detector systems on OMEGA, the National Ignition Facility, and laser megajoule.

  9. A method for in situ absolute DD yield calibration of neutron time-of-flight detectors on OMEGA using CR-39-based proton detectors

    International Nuclear Information System (INIS)

    Waugh, C. J.; Zylstra, A. B.; Frenje, J. A.; Séguin, F. H.; Petrasso, R. D.; Rosenberg, M. J.; Glebov, V. Yu.; Sangster, T. C.; Stoeckl, C.

    2015-01-01

    Neutron time of flight (nTOF) detectors are used routinely to measure the absolute DD neutron yield at OMEGA. To check the DD yield calibration of these detectors, originally calibrated using indium activation systems, which in turn were cross-calibrated to NOVA nTOF detectors in the early 1990s, a direct in situ calibration method using CR-39 range filter proton detectors has been successfully developed. By measuring DD neutron and proton yields from a series of exploding pusher implosions at OMEGA, a yield calibration coefficient of 1.09 ± 0.02 (relative to the previous coefficient) was determined for the 3m nTOF detector. In addition, comparison of these and other shots indicates that significant reduction in charged particle flux anisotropies is achieved when bang time occurs significantly (on the order of 500 ps) after the trailing edge of the laser pulse. This is an important observation as the main source of the yield calibration error is due to particle anisotropies caused by field effects. The results indicate that the CR-39-nTOF in situ calibration method can serve as a valuable technique for calibrating and reducing the uncertainty in the DD absolute yield calibration of nTOF detector systems on OMEGA, the National Ignition Facility, and laser megajoule

  10. Selected nutrient contents, fatty acid composition, including conjugated linoleic acid, and retention values in separable lean from lamb rib loins as affected by external fat and cooking method.

    Science.gov (United States)

    Badiani, Anna; Montellato, Lara; Bochicchio, Davide; Anfossi, Paola; Zanardi, Emanuela; Maranesi, Magda

    2004-08-11

    Proximate composition and fatty acid profile, conjugated linoleic acid (CLA) isomers included, were determined in separable lean of raw and cooked lamb rib loins. The cooking methods compared, which were also investigated for cooking yields and true nutrient retention values, were dry heating of fat-on cuts and moist heating of fat-off cuts; the latter method was tested as a sort of dietetic approach against the more traditional former type. With significantly (P cooking losses, dry heating of fat-on rib-loins produced slightly (although only rarely significantly) higher retention values for all of the nutrients considered, including CLA isomers. On the basis of the retention values obtained, both techniques led to a minimum migration of lipids into the separable lean, which was higher (P cooking of the class of CLA isomers (including that of the nutritionally most important isomer cis-9,trans-11) was more similar to that of the monounsaturated than the polyunsaturated fatty acids.

  11. Assessing potential sustainable wood yield

    Science.gov (United States)

    Robert F. Powers

    2001-01-01

    Society is making unprecedented demands on world forests to produce and sustain many values. Chief among them is wood supply, and concerns are rising globally about the ability of forests to meet increasing needs. Assessing this is not easy. It requires a basic understanding of the principles governing forest productivity: how wood yield varies with tree and stand...

  12. A continuous on-line method for fission yield measurements with the combined GJTR-SISAK technique

    International Nuclear Information System (INIS)

    Bjoernstad, T.

    1981-01-01

    The principles of a method for fission yield measurements with the combined GJRT-SISAK techniques are outlined. Only the simple case where parent effects can be neglected is considered in detail. The article includes derivation of a relation between the production rate and the counting rate of a nuclide. The expression contains various efficiency parameters and the system dependent delay probability function p(t). The way to experimentally determine these parameters and the delay probability curve, as well as the fitting of an analytical function to the curve are shown. The method is general in the sense that the main principles are independent upon the nuclide under study, fissile target material and bombarding particle used. (orig.)

  13. Contrast-enhanced 3T MR Perfusion of Musculoskeletal Tumours: T1 Value Heterogeneity Assessment and Evaluation of the Influence of T1 Estimation Methods on Quantitative Parameters.

    Science.gov (United States)

    Gondim Teixeira, Pedro Augusto; Leplat, Christophe; Chen, Bailiang; De Verbizier, Jacques; Beaumont, Marine; Badr, Sammy; Cotten, Anne; Blum, Alain

    2017-12-01

    To evaluate intra-tumour and striated muscle T1 value heterogeneity and the influence of different methods of T1 estimation on the variability of quantitative perfusion parameters. Eighty-two patients with a histologically confirmed musculoskeletal tumour were prospectively included in this study and, with ethics committee approval, underwent contrast-enhanced MR perfusion and T1 mapping. T1 value variations in viable tumour areas and in normal-appearing striated muscle were assessed. In 20 cases, normal muscle perfusion parameters were calculated using three different methods: signal based and gadolinium concentration based on fixed and variable T1 values. Tumour and normal muscle T1 values were significantly different (p = 0.0008). T1 value heterogeneity was higher in tumours than in normal muscle (variation of 19.8% versus 13%). The T1 estimation method had a considerable influence on the variability of perfusion parameters. Fixed T1 values yielded higher coefficients of variation than variable T1 values (mean 109.6 ± 41.8% and 58.3 ± 14.1% respectively). Area under the curve was the least variable parameter (36%). T1 values in musculoskeletal tumours are significantly different and more heterogeneous than normal muscle. Patient-specific T1 estimation is needed for direct inter-patient comparison of perfusion parameters. • T1 value variation in musculoskeletal tumours is considerable. • T1 values in muscle and tumours are significantly different. • Patient-specific T1 estimation is needed for comparison of inter-patient perfusion parameters. • Technical variation is higher in permeability than semiquantitative perfusion parameters.

  14. Calculation of forces arising from impacting projectiles upon yielding structures

    International Nuclear Information System (INIS)

    Drittler, K.; Gruner, P.; Krivy, J.

    1977-01-01

    Calculations concerning the impact of airplanes upon nuclear power plant buildings usually imply that the building [QUOTE]acts' as a rigid target. This assumption is justified for considerations concerning the structural integrity of the building being hit. However, for investigating induced vibrations of components within the structure, this approach might-in general-be too conservative. It is expected, that yielding of the structure during impact reduces the peak values of the loads and changes the temporal behaviour of the load function which is obtained for a rigid target. To calculate the changes of the load function which are due to deformations of the structure, Riera's method is extended for the case of a yielding target. The calculations are performed with a one-dimensional model for the projectile. The presented model calculations seem to verify that the motion of the target does not have much influence on the impact force for projectiles similar to the model projectile, provided the displacement of the yielding target is small in comparison with the path covered by the free-flying projectile during a time which is equivalent to the total time of impact. (Auth.)

  15. Yield surface evolution for columnar ice

    Science.gov (United States)

    Zhou, Zhiwei; Ma, Wei; Zhang, Shujuan; Mu, Yanhu; Zhao, Shunpin; Li, Guoyu

    A series of triaxial compression tests, which has capable of measuring the volumetric strain of the sample, were conducted on columnar ice. A new testing approach of probing the experimental yield surface was performed from a single sample in order to investigate yield and hardening behaviors of the columnar ice under complex stress states. Based on the characteristic of the volumetric strain, a new method of defined the multiaxial yield strengths of the columnar ice is proposed. The experimental yield surface remains elliptical shape in the stress space of effective stress versus mean stress. The effect of temperature, loading rate and loading path in the initial yield surface and deformation properties of the columnar ice were also studied. Subsequent yield surfaces of the columnar ice have been explored by using uniaxial and hydrostatic paths. The evolution of the subsequent yield surface exhibits significant path-dependent characteristics. The multiaxial hardening law of the columnar ice was established experimentally. A phenomenological yield criterion was presented for multiaxial yield and hardening behaviors of the columnar ice. The comparisons between the theoretical and measured results indicate that this current model is capable of giving a reasonable prediction for the multiaxial yield and post-yield properties of the columnar ice subjected to different temperature, loading rate and path conditions.

  16. A Technique of Fuzzy C-Mean in Multiple Linear Regression Model toward Paddy Yield

    Science.gov (United States)

    Syazwan Wahab, Nur; Saifullah Rusiman, Mohd; Mohamad, Mahathir; Amira Azmi, Nur; Che Him, Norziha; Ghazali Kamardan, M.; Ali, Maselan

    2018-04-01

    In this paper, we propose a hybrid model which is a combination of multiple linear regression model and fuzzy c-means method. This research involved a relationship between 20 variates of the top soil that are analyzed prior to planting of paddy yields at standard fertilizer rates. Data used were from the multi-location trials for rice carried out by MARDI at major paddy granary in Peninsular Malaysia during the period from 2009 to 2012. Missing observations were estimated using mean estimation techniques. The data were analyzed using multiple linear regression model and a combination of multiple linear regression model and fuzzy c-means method. Analysis of normality and multicollinearity indicate that the data is normally scattered without multicollinearity among independent variables. Analysis of fuzzy c-means cluster the yield of paddy into two clusters before the multiple linear regression model can be used. The comparison between two method indicate that the hybrid of multiple linear regression model and fuzzy c-means method outperform the multiple linear regression model with lower value of mean square error.

  17. Quantitative analysis of microbial biomass yield in aerobic bioreactor.

    Science.gov (United States)

    Watanabe, Osamu; Isoda, Satoru

    2013-12-01

    We have studied the integrated model of reaction rate equations with thermal energy balance in aerobic bioreactor for food waste decomposition and showed that the integrated model has the capability both of monitoring microbial activity in real time and of analyzing biodegradation kinetics and thermal-hydrodynamic properties. On the other hand, concerning microbial metabolism, it was known that balancing catabolic reactions with anabolic reactions in terms of energy and electron flow provides stoichiometric metabolic reactions and enables the estimation of microbial biomass yield (stoichiometric reaction model). We have studied a method for estimating real-time microbial biomass yield in the bioreactor during food waste decomposition by combining the integrated model with the stoichiometric reaction model. As a result, it was found that the time course of microbial biomass yield in the bioreactor during decomposition can be evaluated using the operational data of the bioreactor (weight of input food waste and bed temperature) by the combined model. The combined model can be applied to manage a food waste decomposition not only for controlling system operation to keep microbial activity stable, but also for producing value-added products such as compost on optimum condition. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  18. The Effect of Seed Priming and Transplanting on Morphological Characteristics, Yield and Yield Components of SuperSweet Corn

    Directory of Open Access Journals (Sweden)

    matin haghighi khah

    2017-08-01

    Full Text Available Introduction Corn (Zea mays L. is the third most important cereal crop in the world after wheat and rice (Lashkari et al., 2011. Corn production has been extended in to the whole world during the course of the last century due to its compatibility. It has more diversity compare to other cereal. Many corn types are cultivated, including field corn, ornamental corn, popcorn, sweet corn and several different supersweet corns. Sweet corn, considered a vegetable, is a special type of corn with particular characteristics, such as sweet taste, thin pericarp and endosperm with delicate texture, and high nutritional value. It is destined exclusively for human consumption, in fresh form or in processed foods, whereas the straw can be used for silage after harvest (Santos et al., 2014. Sweet corn seeds germinate slowly and exhibit poor seedling vigour. Poor germination in sweet corn has been attributed to low seed vigour and susceptibility to seed and soilborne diseases (Ratin et al., 2006. Seed priming is the one of efficient method to improve germination and emergence. In addition, transplanting provides optimal environmental conditions for seed germination and avoids planting seeds in disease-contaminated soil (Khalid et al., 2012. Materials and methods To investigate the effect of seed priming and transplanting on morphological characteristics, yield and yield components of supersweet corn a series of greenhouse and field experiments were conducted in a factorial based design on a randomized complete block in 2013. This experiment was conducted in the greenhouse to determine the best seed priming treatments. The treatments were hydro priming, Poly ethylene glycol (6000 -0.4 and -0.8 MPa, Sodium Sulphate 0.1 and 0.5%, Zinc Sulphate 1 and 0.5%, Copper Sulphate 0.1 and 0.5% and Control for 36 hours. After that the seeds washed by distillated water and dried back in laboratory conditions. Then treated seeds were sown in trays that contained by cocopeatand

  19. The Interval-Valued Triangular Fuzzy Soft Set and Its Method of Dynamic Decision Making

    Directory of Open Access Journals (Sweden)

    Xiaoguo Chen

    2014-01-01

    Full Text Available A concept of interval-valued triangular fuzzy soft set is presented, and some operations of “AND,” “OR,” intersection, union and complement, and so forth are defined. Then some relative properties are discussed and several conclusions are drawn. A dynamic decision making model is built based on the definition of interval-valued triangular fuzzy soft set, in which period weight is determined by the exponential decay method. The arithmetic weighted average operator of interval-valued triangular fuzzy soft set is given by the aggregating thought, thereby aggregating interval-valued triangular fuzzy soft sets of different time-series into a collective interval-valued triangular fuzzy soft set. The formulas of selection and decision values of different objects are given; therefore the optimal decision making is achieved according to the decision values. Finally, the steps of this method are concluded, and one example is given to explain the application of the method.

  20. Yield surfaces for perforated plates with square arrays of holes

    International Nuclear Information System (INIS)

    Bhattacharya, A.; Venkat Raj, V.

    2004-01-01

    A symmetric model of a perforated plate containing a 3x3 array of circular holes, arranged in a square pattern, was chosen and elastoplastic finite element analyses were carried out to determine the limit stresses for both pitch and diagonal directions of loading, for different values of biaxiality ratios. Plane stress conditions were assumed and the Tresca and von Mises yield criteria were employed to obtain two different sets of results. Yield surfaces were constructed and 'general cut-out factors' were determined for four different ligament efficiencies. The FEM results obtained by the authors using the Tresca and von Mises yield criteria were compared with the corresponding results of [J. Pressure Vessel Technol. Trans. ASME (1975) 146-154] and [J. Pressure Vessel Technol. Trans. ASME (1997) 122-126], respectively. The results based on the Tresca yield criterion obtained by the present authors and those in [J. Pressure Vessel Technol. Trans. ASME (1975) 146-154] were found to agree well with each other. In the case of the von Mises yield criterion, the agreement with [J. Pressure Vessel Technol. Trans. ASME 122-126] is generally good. The estimates based on the Tresca yield criterion are seen to result in lower values of limit stresses and cut-out factors as compared to those based on the von Mises yield criterion. The difference is attributed to the yield criterion and the flow rule chosen for the analysis. The shape as well as the size of the yield surface was found to depend on the ligament efficiency

  1. Initial value methods for boundary value problems

    CERN Document Server

    Meyer, Gunter H

    1973-01-01

    In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation;methods for low-rank mat

  2. Maximizing the ExoEarth candidate yield from a future direct imaging mission

    International Nuclear Information System (INIS)

    Stark, Christopher C.; Roberge, Aki; Mandell, Avi; Robinson, Tyler D.

    2014-01-01

    ExoEarth yield is a critical science metric for future exoplanet imaging missions. Here we estimate exoEarth candidate yield using single visit completeness for a variety of mission design and astrophysical parameters. We review the methods used in previous yield calculations and show that the method choice can significantly impact yield estimates as well as how the yield responds to mission parameters. We introduce a method, called Altruistic Yield Optimization, that optimizes the target list and exposure times to maximize mission yield, adapts maximally to changes in mission parameters, and increases exoEarth candidate yield by up to 100% compared to previous methods. We use Altruistic Yield Optimization to estimate exoEarth candidate yield for a large suite of mission and astrophysical parameters using single visit completeness. We find that exoEarth candidate yield is most sensitive to telescope diameter, followed by coronagraph inner working angle, followed by coronagraph contrast, and finally coronagraph contrast noise floor. We find a surprisingly weak dependence of exoEarth candidate yield on exozodi level. Additionally, we provide a quantitative approach to defining a yield goal for future exoEarth-imaging missions.

  3. Changes of heart: the switch-value method for assessing value uncertainty.

    Science.gov (United States)

    John, Leslie K; Fischhoff, Baruch

    2010-01-01

    Medical choices often evoke great value uncertainty, as patients face difficult, unfamiliar tradeoffs. Those seeking to aid such choices must be able to assess patients' ability to reduce that uncertainty, to reach stable, informed choices. The authors demonstrate a new method for evaluating how well people have articulated their preferences for difficult health decisions. The method uses 2 evaluative criteria. One is internal consistency, across formally equivalent ways of posing a choice. The 2nd is compliance with principles of prospect theory, indicating sufficient task mastery to respond in predictable ways. Subjects considered a hypothetical choice between noncurative surgery and palliative care, posed by a brain tumor. The choice options were characterized on 6 outcomes (e.g., pain, life expectancy, treatment risk), using a drug facts box display. After making an initial choice, subjects indicated their willingness to switch, given plausible changes in the outcomes. These changes involved either gains (improvements) in the unchosen option or losses (worsening) in the chosen one. A 2 x 2 mixed design manipulated focal change (gains v. losses) within subjects and change order between subjects. In this demonstration, subjects' preferences were generally consistent 1) with one another: with similar percentages willing to switch for gains and losses, and 2) with prospect theory, requiring larger gains than losses, to make those switches. Informed consent requires understanding decisions well enough to articulate coherent references. The authors' method allows assessing individuals' success in doing so.

  4. Simulation-based production planning for engineer-to-order systems with random yield

    NARCIS (Netherlands)

    Akcay, Alp; Martagan, Tugce

    2018-01-01

    We consider an engineer-to-order production system with unknown yield. We model the yield as a random variable which represents the percentage output obtained from one unit of production quantity. We develop a beta-regression model in which the mean value of the yield depends on the unique

  5. Enhancement of HHG yield

    International Nuclear Information System (INIS)

    Serrat, C.; Biegert, J.

    2011-01-01

    A static electric field periodically distributed in space controls and enhances the yield in high harmonic generation. The method is relatively simple to implement and allows tuning from the extreme-ultraviolet to soft X-ray. The radiation yield is selectively enhanced due to symmetry breaking induced by a static electric field on the interaction between the driving laser and the medium. The enhanced spectral region is tuned by varying the periodicity of the static electric field. Simulations predict an increase of more than two orders of magnitude for harmonics in the water window spectral range.

  6. Effect of some biological factors on the chitin yield of two crustacean species inhabiting the Egyptian waters

    Directory of Open Access Journals (Sweden)

    Amira Talaat Abo-Hashesh

    2017-11-01

    Full Text Available Objective: To investigate the chitin yield of two commercial crustacean species that are exploited in the Suez Canal region, the Red Sea crab Charybdis natator (C. natator and the Mediterranean mantis shrimp Erugosquilla massavensis (E. massavensis, and to assess the effect of some biological factors such as sex, size and maturity stages of females' ovaries on this yield. Methods: A total of 64 specimens of crabs were collected from the Red Sea and 1 377 mantis shrimps were collected from the Mediterranean Sea. Chitin was obtained after the deproteinization, de-mineralization and de-colorization of 5 g oven dried exoskeletons and values were expressed as g/5 g and percentages. Results: Chitin yield was significantly higher in E. massavensis than C. natator (22.1%, 14.22%, respectively. No significant difference in the yield was recorded between males and females of C. natator (12.9%, 14.9%, respectively, while the yield in E. massavensis males was significantly higher than females (25.3%, 21.2%, respectively. Significant variations in the chitin yield were observed between the different sizes of E. massavensis with the maximum being from the individuals falling in the size range 90–130 mm body length. The yield was at its lowest in the immature stage of C. natator females' ovaries (9.29%. However, the values increased and remained constant for the remaining stages (≥ 18%. Conclusions: The study recommends the use of the mantis shrimp for the production of chitin on commercial scale particularly medium sized males.

  7. Determination of experimental K-shell fluorescence yield for ...

    Indian Academy of Sciences (India)

    calcium compounds using a Si(Li) X-ray detector system (FWHM=5.96 keV at 160 eV). The samples were excited by 5.96 keV photons produced by a 55Fe radioisotope source. The experimental values are systematically lower than the theoretical values. Keywords. X-ray; fluorescence yield; cross-section and chemical ...

  8. Measurement of the average L-shell fluorescence yields in elements 40<=Z<=53

    Energy Technology Data Exchange (ETDEWEB)

    Singh, N; Mittal, R; Allawadhi, K L; Sood, B S [Punjabi Univ., Patiala (India). Dept. of Physics

    1983-12-01

    The average L-shell fluorescence yields in Zr, Nb, Mo, Ag, Cd, In, Sn and I have been measured using photo-ionization for creating the vacancies. The present results are found to agree well with those calculated using the values of L-subshell fluorescence yields and Coster-Kronig yields of Krause et al., but are lower than the only available experimental results of Lay. To the best of our knowledge, the values in Nb, Cd, In and I are reported for the first time.

  9. Equivalence of ten different methods for valuing companies by cash flow discounting.

    OpenAIRE

    Fernandez, Pablo

    2003-01-01

    This paper shows that ten methods of company valuation using cash flow discounting (WACC; equity cash flow; capital cash flow; adjusted present value; residual income; EVA; business's risk-adjusted equity cash flow; business's risk-adjusted free cash flow; risk-free-adjusted equity cash flow; and risk-free-adjusted free cash flow) always give the same value when identical assumptions are used. This result is logical, since all the methods analyze the same reality based upon the same assumptio...

  10. Effect of Biofertilizers on the Yield and Yield Components of Black Cumin (Nigella sativa L.

    Directory of Open Access Journals (Sweden)

    S Khorramdel

    2011-02-01

    Full Text Available Abstract Application of biological fertilizers is one of the most important methods for plant nutrition in ecological agriculture. In order to investigate the effect of biofertilizers on yield and yield components of black cumin (Nigella sativa L., a field experiment was arranged in a randomized complete block design with three replications during 2007 growing season at the Agricultural Research Station of Ferdowsi University of Mashhad. Treatments included: (A Azotobacter paspali, (B Azospirillum brasilense, (C the fungus of Glomus intraradaices, C+A, C+B, A+B, A+B+C, and control without no biofertilizers. In all treatments except control, the amounts of 15 mg of each biofertilizer were applied to 110 g of seeds. Results indicated that application of biofertilizers enhanced yield and yield components and decreased percentage of hollow capsules. Plant performance was better with application of Azospirillum plus mycorrhiza and a mixture of Azotobacter, Azospirillum and mycorrhiza in terms of yield determining criteria. The maximum and minimum amounts of seed yield were recorded in the B+C treatment with 41.4 gm-2, and control with 24.1 gm-2, respectively. There was no significant correlation between number of capsules per plant and seed yield, but the positive and significant correlation between number of branches per plant, number of seeds per capsule, 1000-seed weight and seed yield was observed. This study showed that application of suitable biofertilizers could increase yield and yield components of black cumin. Keywords: Biofertilizer, Ecological agriculture, Medicinal plants, Plant growth promoting rhizobacteria

  11. Measurement of the yield and tensile strengths of neutron-irradiated and post-irradiation recovered vessel steels with notched specimens

    International Nuclear Information System (INIS)

    Valiente, A.

    1996-01-01

    Tensile circumferentially notched bars are examined as test specimens for measuring the yield and tensile strengths of nuclear pressure vessel steels under several conditions of irradiation and temperature that a vessel can experience during its service life, including recovery post-irradiation treatment. For all the vessel steels, notch geometries and conditions explored, it has been found that notched specimens fail by plastic collapse, and simple formulae have been derived that allow the yield and tensile strengths to be determined from the yielding and plastic collapse load of a notched specimen. Values measured in this way show good agreement with those measured by the standard tensile test method. (orig.)

  12. Test method for measuring insulation values of cryogenic pipes

    NARCIS (Netherlands)

    Velthuis, J.F.M.; Blokland, H.; Klaver, B.W.; Beld, C. van de

    2010-01-01

    In this paper a large-area heat flux and temperature sensor (HFT) is used for the evaluation of the insulation value of cryogenic pipes. The HFT is flexible and clamp-on. The test method is relatively simple and can be used in-situ. The HFT makes it possible to monitor insulation performance over

  13. Effects of Plant Density on Sweet and Baby Corn (Hybrid KSC 403 Yield and Yield Components

    Directory of Open Access Journals (Sweden)

    H Bavi

    2016-07-01

    Full Text Available Introduction Sweet corn is the one of the most important types of corn. There is a high amount of sugar in the endosperm of sweet corn than dent corn. Baby corn is the ear of corn that is being harvested in the silking stage before the end of pollination. This crop has an interesting using methods as salad, conserve production and vegetative consumption. Both two sweet and baby corn is obtained from one plant in different growth stages and could be harvested from one corn hybrid. Best yield and quality of baby corn is obtained from sweet corn hybrids, because of high amounts of sugar in the grains and ears. Sweet corn and baby corn could be harvested at early dough stage (with about 30 % of humidity and early silking stage before the pollination is completed, respectively. Plant density is the most important factor in growing corn, especially in sweet and baby corn. Khuzestan province is one of the main regions of corn production in Iran. In Khuzestan, forage and silage corn have the most production among the summer crops. Corn is planted in two planting date in Khuzestan: early spring and early summer. Spring corn planting produces little grain yield due to Simultaneity of silking stage with hot early summer days. Because of little production and little research about sweet and baby corn, this study was performed and designed. Materials and Methods In order to investigate the effects of plant density and harvesting method on sweet corn and baby corn yield, an experiment was performed during 2012-13, in research farm of Ramin Agriculture and Natural Resources University of Khuzestan, located in southwest of Iran. In this experiment, four plant densities (7, 9, 11 and 13 plants.m-2 and two harvesting methods (baby corn and sweet corn were investigated in an RCB statistical design with four replications. The KSC 403 hybrid was used and investigated in the experiment, as a sweet corn hybrid. Statistical analysis was performed using SAS 9.1 through

  14. The Value of Developing a Mixed-Methods Program of Research.

    Science.gov (United States)

    Simonovich, Shannon

    2017-07-01

    This article contributes to the discussion of the value of utilizing mixed methodological approaches to conduct nursing research. To this end, the author of this article proposes creating a mixed-methods program of research over time, where both quantitative and qualitative data are collected and analyzed simultaneously, rather than focusing efforts on designing singular mixed-methods studies. A mixed-methods program of research would allow for the best of both worlds: precision through focus on one method at a time, and the benefits of creating a robust understanding of a phenomenon over the trajectory of one's career through examination from various methodological approaches.

  15. Response of Cotton to Irrigation Methods and Nitrogen Fertilization: Yield Components, Water-Use Efficiency, Nitrogen Uptake, and Recovery

    International Nuclear Information System (INIS)

    Janat, M.

    2009-01-01

    Efficient crop use of nitrogen (N) fertilizer is critical from economic and environmental viewpoints, especially under irrigated conditions. Cotton yield parameters, fiber quality, water- and N-use efficiency responses to N, and irrigation methods in northern Syria were evaluated. Field trials were conducted for two growing seasons on a Chromoxerertic Rhodoxeralf soil. Treatments consisted of drip fertigation, furrow irrigation, and five different rates of N fertilizer (50, 100, 150, 200, and 250 kg N /ha). Cotton was irrigated when soil moisture in the specified active root depth was 80% of the field capacity as indicated by the neutron probe. Seed cotton yield was higher than the national average (3,928 kg/ha) by at least 12% as compared to all treatments. Lint properties were not negatively affected by the irrigation method or N rates. Water savings under drip fertigation ranged between 25 and 50% of irrigation water relative to furrow irrigation. Crop water-use efficiencies of the drip-fertigated treatments were in most cases 100% higher than those of the corresponding furrow-irrigated treatments. The highest water demand was during the fruit-setting growth stage. It was also concluded that under drip fertigation, 100 -150 N kg/ha was adequate and comparable with the highest N rates tested under furrow irrigation regarding lint yield, N uptake, and recovery. Based on cotton seed yield and weight of stems, the overall amount of N removed from the field for the drip-fertigated treatments ranged between 101-118 kg and 116-188 N/ha for 2001 and 2002, respectively. The N removal ranged between 94-113 and 111-144 kg N/ha for the furrow-irrigated treatments for 2001 and 2002, respectively. (author)

  16. Yield of yearly routine physical examination in HIV-1 infected patients is limited : A retrospective cohort study in the Netherlands

    NARCIS (Netherlands)

    van Amsterdam, Marleen A.; van Assen, Sander; Sprenger, Herman G.; Wilting, Kasper R.; Stienstra, Ymkje; Bierman, Wouter F. W.

    2017-01-01

    Background Routine physical examinations might be of value in HIV-infected patients, but the yield is unknown. We determined the diagnoses that would have been missed without performing annual routine physical examinations in HIV-infected patients with stable disease. Methods Data were collected

  17. PRODUCT OPTIMIZATION METHOD BASED ON ANALYSIS OF OPTIMAL VALUES OF THEIR CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Constantin D. STANESCU

    2016-05-01

    Full Text Available The paper presents an original method of optimizing products based on the analysis of optimal values of their characteristics . Optimization method comprises statistical model and analytical model . With this original method can easily and quickly obtain optimal product or material .

  18. Experimental assessment of bacterial storage yield

    DEFF Research Database (Denmark)

    Karahan-Gül, Ö.; Artan, N.; Orhon, D.

    2002-01-01

    to the amount of oxygen associated with substrate storage. Model simulation was used to evaluate the procedure for different initial experimental conditions. The procedure was tested on acetate. The same storage yield value of 0.76 gCOD/gCOD was calculated for two experiments, starting with different F/M ratios...

  19. Yield and Quality Features of Buckwheat-Soybean Mixtures in Organic Agricultural Conditions

    Directory of Open Access Journals (Sweden)

    Mustafa Sürmen

    2017-12-01

    Full Text Available This study was carried out during the summer of 2014 to determine alternative quality forage sources that could be grown in the Aydın ecological conditions. In the study, effects of 3 different mixtures and 2 pure species (100% Buckwheat, 25% Buckwheat -75% Soybean, 50% Buckwheat -5 0% Soybean, 75% Buckwheat - 25% Soybean, 100% Soybean and 2 different harvesting times (50%-100% flowering/buckwheat on yield and quality characteristics were investigated. According to measurements, the highest average herbage yield was obtained from 75% Buckwheat-25% Soybean application (3100 kg/da at 2nd harvest time. When the average of hay yield was examined, the results were similar to herbage yield. When ADF and NDF were examined, the highest values were seen at the 2nd harvest. When the crude protein ratios were examined, it was found that they decreased at the 2nd harvesting time and the highest value was determined at 100% soybean application at the 1st harvesting time (21.08%. When Digestible Dry Matter (DDM and Relative Feed Value (RFV were examined, the highest values were determined in 100%Soybean applications at first harvest time and when the mixture applications were examined, the highest values were determined to be 75% Buckwheat - 25% Soybean application. As a result of the study, it was determined that the yields obtained at the 2nd harvest time were higher but the forage quality decreased. When the mixtures were examined, it was determined that the mixture having the highest roughage value was 75% buckwheat + 25% soybean application. In this study, the buckwheat which have short vegetation and good quality and the soybean, which is infront of with high quality, mixtures were examined. It has also been found that these mixtures may be important for obtaining high-quality forage in the short and intermediate periods.

  20. A new inductive method for measuring the RRR-value of niobium

    International Nuclear Information System (INIS)

    Bolore, M.; Bonin, B.; Boudigou, Y.; Heuveline, S.; Jacques, E.; Jaidane, S.; Koechlin, F.; Safa, H.

    1996-01-01

    A new method for measuring the RRR-value of niobium is presented. The principle of the measurement uses low frequency induction in a niobium sheet placed close to a pair of coils. In contrast with the usual resistive method, the present one gives information on the local value of the RRR, with a spatial resolution of the order of 1 cm. In addition, it is non destructive, thus opening the way to mapping RRR measurements on cavities. This tool will permit the measure of RRR inhomogeneities in cavities due to sheet forming or heat treatments, and the systematic check of the quality of weld seams. (author)

  1. YIELD AND QUALITY OF SORGHUM IN IRRIGATED AGRO LANDSCAPES OF REPUBLIC OF DAGESTAN

    Directory of Open Access Journals (Sweden)

    M G. Muslimov

    2016-01-01

    Full Text Available Aim. One of drought-resistant crops that can provide stable high yields is sorghum, which is salt-tolerant, heat-resistant and a flexible crop of versatile use (green forage, silage, hay, grass meal, grain forage. The research conducted in 2010-2013 included studies on the effectiveness of the methods and norms of sowing the sorghum, required quantities of mineral fertilizers to increase the crop yields and nutritional value of sorghum sown in the irrigated lowland areas of Dagestan. Methods. We conducted three field researches. In experiments with grain sorghum (the middle ripening group Zernogradskiy 88 we studied drill and broad-cast methods of sowing, seeding rate, the calculated doses of mineral fertilizers on programmable levels of crop yields: 6 t/ha (N160P112K70, 7 t/ha (N190P128K80 and 8 t/ha (N220P144K90. Seeding rate was 300, 350 and 400 thousand viable seeds per 1 ha; broadcast was chosen as a sowing method.A field experiment with sweet sorghum included promising hybrid crop Debut, fertilizers N140P80K70, N190P110K95 and N240P140K120 to obtain 60, 70 and 80 t/ha of green mass for two mowings, respectively. Results. The use of fertilizers based on a given level of productivity at optimum plant population can significantly improve the nutritional regime of the soil during the growing season of the sweet sorghum and create optimal conditions for nitrogen, phosphorus and potassium security for the crops and thus obtain the planned crop yield. Conclusion. The fodder quality of sweet sorghum varies depending on the nutrient status of the soil and mowing time.

  2. The Effect of Crop Residue and Different NPK Fertilizer Rates on yield Components and Yield of Wheat

    Directory of Open Access Journals (Sweden)

    fatemeh khamadi

    2017-08-01

    Full Text Available Introduction Integrated nutrient management involving crop residue/green manures and chemical fertilizer is potential alternative to provide a balanced supply of nutrients, enhance soil quality and thereby sustain higher productivity. The present experiment was undertaken to evaluate the effect of different crop residue management practices and NPK levels on yield components and yield of wheat. Materials and methods Field experiments were conducted during 2012-2014 at department of agronomy, Chamran University. Experiment was laid out in a randomized block designs in split plot arrangement. With three replications. Crop residues were assigned to main plot consistent CR1: wheat residue; CR2: rape residue; CR3: barley residue; CR4: barley residue + vetch; CR5: wheat straw + mungbean; CR6: vetch residue; CR7: mungbean residue; CR8: No residue incorporation as main plot and three NPK fertilizer rates: F1: (180N-120P-100K kg.ha-1; F2: (140N-90P-80K kg.ha-1; F3: (90N-60P-40K kg.ha-1 as sub plots. Twelve hills were collected at physiological maturity for measuring yield components from surrounding area of grain yield harvest area. Yield components, viz. number of spike per m2, seed per spike, 1000- grain weight, plant height were measured. Grain and straw yields were recorded from the central 5 m2 grain yield harvest area of each treatment and harvest index was calculated. Data were subjected to analysis by SAS and mean companions were performed using the Duncan multiple range test producer. Also, graphs were drawn in Excel software. Results and discussion The result of analysis variance showed significant difference between crop residues for evaluated traits. The result indicated that the highest biological and grain yield was obtained when wheat treated with CR5: wheat straw + mungbean (green manure and CR4: barley straw + vetch (green manure. Biological and grain yield increased 31 and 26% respectively by CR5 comparing with control. The highest

  3. Method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions

    Science.gov (United States)

    Horwitz, E. Philip; Delphin, Walter H.

    1979-07-24

    A method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions containing these and other values by contacting the waste solution with an extractant of tricaprylmethylammonium nitrate in an inert hydrocarbon diluent which extracts the palladium and technetium values from the waste solution. The palladium and technetium values are recovered from the extractant and from any other coextracted values with a strong nitric acid strip solution.

  4. Study on Yield and Yield Components of Wheat Genotypes under Different Moisture Regimes

    Directory of Open Access Journals (Sweden)

    E. Mogtader

    2012-10-01

    Full Text Available In order to study grain yield and yield components of 16 advanced wheat lines under rainfed and supplementary irrigation conditions, this research was conducted in randomized block design with 3 replications at Maragheh Research Station during 2008-09 seasons. Analysis of variance revealed significant differences for date to heading, plant height, 1000 kernel weight, tiller number, spike length, seed number per spike, spikelet number per spike, peduncle length, harvest index, leaf, sheath length and grain yield. Results also showed that the lines No. 4 (91-142 a 61/3/F35.70/MO73//1D13.1/MLT and 16 (Azar2 with 1895 and 1878 Kg/ha, lines No. 4 and 7 (YUMAI13/5/NAI60/3/14.53/ODIN//CI13441 with 2132 and 2285 Kg/ha had highest grain yield under rainfed and supplementary irrigated conditions respectively. Based on results these 16 lines and cultivars were grouped in 4 and 3 distinct classes using Ward’s Method of cluster analysis under rainfed and irrigated conditions. Path analysis indicated that vigor at shooting stage, seed number per spike and HI were positive important traits to select lines for high yielding potential in this study. HI and TKW had also positive effects on grain under supplementary irrigation.

  5. Wheat Yield Forecasting for Punjab Province from Vegetation Index Time Series and Historic Crop Statistics

    Directory of Open Access Journals (Sweden)

    Jan Dempewolf

    2014-10-01

    Full Text Available Policy makers, government planners and agricultural market participants in Pakistan require accurate and timely information about wheat yield and production. Punjab Province is by far the most important wheat producing region in the country. The manual collection of field data and data processing for crop forecasting by the provincial government requires significant amounts of time before official reports can be released. Several studies have shown that wheat yield can be effectively forecast using satellite remote sensing data. In this study, we developed a methodology for estimating wheat yield and area for Punjab Province from freely available Landsat and MODIS satellite imagery approximately six weeks before harvest. Wheat yield was derived by regressing reported yield values against time series of four different peak-season MODIS-derived vegetation indices. We also tested deriving wheat area from the same MODIS time series using a regression-tree approach. Among the four evaluated indices, WDRVI provided more consistent and accurate yield forecasts compared to NDVI, EVI2 and saturation-adjusted normalized difference vegetation index (SANDVI. The lowest RMSE values at the district level for forecast versus reported yield were found when using six or more years of training data. Forecast yield for the 2007/2008 to 2012/2013 growing seasons were within 0.2% and 11.5% of final reported values. Absolute deviations of wheat area and production forecasts from reported values were slightly greater compared to using the previous year's or the three- or six-year moving average values, implying that 250-m MODIS data does not provide sufficient spatial resolution for providing improved wheat area and production forecasts.

  6. Structure and scintillation yield of Ce-doped Al–Ga substituted yttrium garnet

    International Nuclear Information System (INIS)

    Sidletskiy, Oleg; Kononets, Valerii; Lebbou, Kheirreddine; Neicheva, Svetlana; Voloshina, Olesya; Bondar, Valerii; Baumer, Vyacheslav; Belikov, Konstantin; Gektin, Alexander; Grinyov, Boris; Joubert, Marie-France

    2012-01-01

    Highlights: ► Range of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are grown from melt by the Czochralski method. ► Light yield of mixed crystals reaches 130% of the YAG:Ce value at x ∼ 0.4. ► ∼1% of antisite defects is formed in YGG:Ce, but no evidence of this is obtained for the rest of crystals. -- Abstract: Structure and scintillation yield of Y 3 (Al 1−x Ga x ) 5 O 12 :Ce solid solution crystals are studied. Crystals are grown from melt by the Czochralski method. Distribution of host cations in crystal lattice is determined. Quantity of antisite defects in crystals is evaluated using XRD and atomic emission spectroscopy data. Trend of light output at Al/Ga substitution in Y 3 (Al 1−x Ga x ) 5 O 12 :Ce is determined for the first time. Light output in mixed crystals reaches 130% comparative to Ce-doped yttrium–aluminum garnet. Luminescence properties at Al/Ga substitution are evaluated.

  7. Landscape democracy, three sets of values, and the connoisseur method

    DEFF Research Database (Denmark)

    Arler, Finn; Mellqvist, Helena

    2015-01-01

    for argument. It examines various methods that have been used to try to make landscape decisions more democratic. In the last part of the paper the connoisseur method is introduced. This method emphasises stakeholder participation in deliberative processes with a particular focus on place-based knowledge......The European Landscape Convention has brought up the question of democracy in relation to landscape transformation, but without a clear definition of democracy. This paper conceptualises democracy in relation to three main sets of values related to self-determination, co-determination and respect...

  8. COMPANY VALUATION METHODS BASED ON PATRIMONY

    Directory of Open Access Journals (Sweden)

    SUCIU GHEORGHE

    2013-02-01

    Full Text Available The methods used for the company valuation can be divided into 3 main groups: methods based on patrimony,methods based on financial performance, methods based both on patrimony and on performance. The companyvaluation methods based on patrimony are implemented taking into account the balance sheet or the financialstatement. The financial statement refers to that type of balance in which the assets are arranged according to liquidity,and the liabilities according to their financial maturity date. The patrimonial methods are based on the principle thatthe value of the company equals that of the patrimony it owns. From a legal point of view, the patrimony refers to allthe rights and obligations of a company. The valuation of companies based on their financial performance can be donein 3 ways: the return value, the yield value, the present value of the cash flows. The mixed methods depend both onpatrimony and on financial performance or can make use of other methods.

  9. Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

    Science.gov (United States)

    Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

    2017-12-01

    Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

  10. Effect of nitrogen and water deficit type on the yield gap between the potential and attainable wheat yield

    Directory of Open Access Journals (Sweden)

    Jiangang Liu

    2015-12-01

    Full Text Available Water deficit and N fertilizer are the two primary limiting factors for wheat yield in the North China plain, the most important winter wheat (Triticum aestivum L. production area in China. Analyzing the yield gap between the potential yield and the attainable yield can quantify the potential for increasing wheat production and exploring the limiting factors to yield gap in the high-yielding farming region of North China Plain. The Decision Support System for Agrotechnology Transfer (DSSAT model was used to identify methods to increase the grain yield and decrease the gap. In order to explore the impact of N and cultivars on wheat yield in the different drought types, the climate conditions during 1981 to 2011 growing seasons was categorized into low, moderate, and severe water deficit classes according to the anomaly percentage of the water deficit rate during the entire wheat growing season. There are differences (P < 0.0001 in the variations of the potential yields among three cultivars over 30 yr. For all three water deficit types, the more recent cultivars Jimai22 and Shijiazhuang8 had higher yields compared to the older 'Jinan17'. As the N fertilizer rate increased, the yield gap decreased more substantially during the low water deficit years because of the significant increase in attainable yield. Overall, the yield gaps were smaller with less water stress. Replacement of cultivars and appropriate N fertilizer application based on the forecasted drought types can narrow the yield gap effectively.

  11. Methods for Accounting for Co-Teaching in Value-Added Models. Working Paper

    Science.gov (United States)

    Hock, Heinrich; Isenberg, Eric

    2012-01-01

    Isolating the effect of a given teacher on student achievement (value-added modeling) is complicated when the student is taught the same subject by more than one teacher. We consider three methods, which we call the Partial Credit Method, Teacher Team Method, and Full Roster Method, for estimating teacher effects in the presence of co-teaching.…

  12. Measurement of the ratio of branching fractions B(B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma})/B(B{sub s}{sup 0}{yields}{phi}{gamma}) and the direct CP asymmetry in B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma}

    Energy Technology Data Exchange (ETDEWEB)

    Aaij, R. [Nikhef National Institute for Subatomic Physics, Amsterdam (Netherlands); Abellan Beteta, C. [Universitat de Barcelona, Barcelona (Spain); Adametz, A. [Physikalisches Institut, Ruprecht-Karls-Universitaet Heidelberg, Heidelberg (Germany); Adeva, B. [Universidad de Santiago de Compostela, Santiago de Compostela (Spain); Adinolfi, M. [H.H. Wills Physics Laboratory, University of Bristol, Bristol (United Kingdom); Adrover, C. [CPPM, Aix-Marseille Universite, CNRS/IN2P3, Marseille (France); Affolder, A. [Oliver Lodge Laboratory, University of Liverpool, Liverpool (United Kingdom); Ajaltouni, Z. [Clermont Universite, Universite Blaise Pascal, CNRS/IN2P3, LPC, Clermont-Ferrand (France); Albrecht, J.; Alessio, F. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Alexander, M. [School of Physics and Astronomy, University of Glasgow, Glasgow (United Kingdom); Ali, S. [Nikhef National Institute for Subatomic Physics, Amsterdam (Netherlands); Alkhazov, G. [Petersburg Nuclear Physics Institute (PNPI), Gatchina (Russian Federation); Alvarez Cartelle, P. [Universidad de Santiago de Compostela, Santiago de Compostela (Spain); Alves, A.A. [Sezione INFN di Roma La Sapienza, Roma (Italy); Amato, S. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro (Brazil); Amhis, Y. [Ecole Polytechnique Federale de Lausanne (EPFL), Lausanne (Switzerland); Anderlini, L. [Sezione INFN di Firenze, Firenze (Italy); Anderson, J. [Physik-Institut, Universitaet Zuerich, Zuerich (Switzerland); Appleby, R.B. [School of Physics and Astronomy, University of Manchester, Manchester (United Kingdom); and others

    2013-02-01

    The ratio of branching fractions of the radiative B decays B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma} and B{sub s}{sup 0}{yields}{phi}{gamma} has been measured using an integrated luminosity of 1.0 fb{sup -1} of pp collision data collected by the LHCb experiment at a centre-of-mass energy of {radical}(s)=7 TeV. The value obtained is (B(B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma}))/(B(B{sub s}{sup 0}{yields}{phi}{gamma})) =1.23{+-}0.06 (stat.){+-}0.04 (syst.){+-}0.10(f{sub s}/f{sub d}), where the first uncertainty is statistical, the second is the experimental systematic uncertainty and the third is associated with the ratio of fragmentation fractions f{sub s}/f{sub d}. Using the world average value for B(B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma}), the branching fraction B(B{sub s}{sup 0}{yields}{phi}{gamma}) is measured to be (3.5{+-}0.4) Multiplication-Sign 10{sup -5}. The direct CP asymmetry in B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma} decays has also been measured with the same data and found to be A{sub CP}(B{sup 0}{yields}K{sup Low-Asterisk 0}{gamma})=(0.8{+-}1.7 (stat.){+-}0.9 (syst.))%. Both measurements are the most precise to date and are in agreement with the previous experimental results and theoretical expectations.

  13. Value of Construction Company and its Dependence on Significant Variables

    Science.gov (United States)

    Vítková, E.; Hromádka, V.; Ondrušková, E.

    2017-10-01

    The paper deals with the value of the construction company assessment respecting usable approaches and determinable variables. The reasons of the value of the construction company assessment are different, but the most important reasons are the sale or the purchase of the company, the liquidation of the company, the fusion of the company with another subject or the others. According the reason of the value assessment it is possible to determine theoretically different approaches for valuation, mainly it concerns about the yield method of valuation and the proprietary method of valuation. Both approaches are dependant of detailed input variables, which quality will influence the final assessment of the company´s value. The main objective of the paper is to suggest, according to the analysis, possible ways of input variables, mainly in the form of expected cash-flows or the profit, determination. The paper is focused mainly on methods of time series analysis, regression analysis and mathematical simulation utilization. As the output, the results of the analysis on the case study will be demonstrated.

  14. Housing Value Forecasting Based on Machine Learning Methods

    OpenAIRE

    Mu, Jingyi; Wu, Fang; Zhang, Aihua

    2014-01-01

    In the era of big data, many urgent issues to tackle in all walks of life all can be solved via big data technique. Compared with the Internet, economy, industry, and aerospace fields, the application of big data in the area of architecture is relatively few. In this paper, on the basis of the actual data, the values of Boston suburb houses are forecast by several machine learning methods. According to the predictions, the government and developers can make decisions about whether developing...

  15. Use of 15N dilution method for screening soybean lines with high yield and high nitrogen fixation ability

    International Nuclear Information System (INIS)

    Li Haixian; Li Xinmin; Danso, S.K.A.

    1998-01-01

    15 N dilution method was used for screening soybean lines with high nitrogen fixation ability. Screened lines 1005, 8502, 2096, 943, 1454 and Dongnong-42 have high nitrogen fixation ability with their % Ndfa of about 70%. 1454 and 1555 are both high yield and high nitrogen fixation lines. The ability of nitrogen fixation was not related to the yield, but related to maturing time. The cultivars with different maturing time have different levels of nitrogen fixation ability. The longer the maturing period is, the greater the ability of nitrogen fixation it has. There were ten cultivars or lines used in the test of 1992 and 1994. Although the weather condition were greatly different between the two years the results of seven cultivars or lines were the same, indicating that nitrogen fixation ability of the soybean is stable with years. Using 15 N dilution method to estimate nitrogen fixation ability of soybean is reliable, however, the % Ndfa of lines 8502 and 2096 increased by 19% in 1994, a rainy year, indicating that a change in % Ndfa with a few varieties maybe caused by weather

  16. Simultaneous selection for cowpea (Vigna unguiculata L.) genotypes with adaptability and yield stability using mixed models.

    Science.gov (United States)

    Torres, F E; Teodoro, P E; Rodrigues, E V; Santos, A; Corrêa, A M; Ceccon, G

    2016-04-29

    The aim of this study was to select erect cowpea (Vigna unguiculata L.) genotypes simultaneously for high adaptability, stability, and yield grain in Mato Grosso do Sul, Brazil using mixed models. We conducted six trials of different cowpea genotypes in 2005 and 2006 in Aquidauana, Chapadão do Sul, Dourados, and Primavera do Leste. The experimental design was randomized complete blocks with four replications and 20 genotypes. Genetic parameters were estimated by restricted maximum likelihood/best linear unbiased prediction, and selection was based on the harmonic mean of the relative performance of genetic values method using three strategies: selection based on the predicted breeding value, having considered the performance mean of the genotypes in all environments (no interaction effect); the performance in each environment (with an interaction effect); and the simultaneous selection for grain yield, stability, and adaptability. The MNC99542F-5 and MNC99-537F-4 genotypes could be grown in various environments, as they exhibited high grain yield, adaptability, and stability. The average heritability of the genotypes was moderate to high and the selective accuracy was 82%, indicating an excellent potential for selection.

  17. Colored plastic mulch microclimates affect strawberry fruit yield and quality.

    Science.gov (United States)

    Shiukhy, Saeid; Raeini-Sarjaz, Mahmoud; Chalavi, Vida

    2015-08-01

    Significant reduction of strawberry (Fragaria × ananassa, Duch.) fruit yield and quality, as a consequence of conventional cultivation method, is common in the Caspian Sea region, Iran. Recently, growers started using plastic mulches to overcome these shortcomings. Plastic mulches have different thermal and radiation properties and could affect strawberry fruit yield and quality. In the present study, the effect of different colored plastic mulches (black, red, and white) along with conventional practice was tested on yield and quality of strawberry Camarosa cultivar, in a completely randomized block design. Colored plastic mulches had highly significant effect on fruit weight, size, and phytochemical contents. In the most harvest times, mean fruit weight was significantly higher in red plastic relative to white and control treatments. Total fruit weight of plastic mulches was not significantly different, while all were statistically higher than that of control. Fruit size significantly increased over red plastic mulch. Total fruit numbers over plastic mulches were significantly higher than that of control treatment. The content of phenolic compounds was similar between treatments, while anthocyanin content, IC(50) value, and flavonoid content significantly were affected by colored plastics. In conclusion, colored plastic mulches could affect strawberry fruit weight and quality through altering strawberry thermal and radiation environment.

  18. Statistical Analysis of Large Simulated Yield Datasets for Studying Climate Effects

    NARCIS (Netherlands)

    Makowski, D.; Asseng, S.; Ewert, F.; Bassu, S.; Durand, J.L.; Martre, P.; Adam, M.; Aggarwal, P.K.; Angulo, C.; Baron, C.; Basso, B.; Bertuzzi, P.; Biernath, C.; Boogaard, H.; Boote, K.J.; Brisson, N.; Cammarano, D.; Challinor, A.J.; Conijn, J.G.; Corbeels, M.; Deryng, D.; Sanctis, De G.; Doltra, J.; Gayler, S.; Goldberg, R.; Grassini, P.; Hatfield, J.L.; Heng, L.; Hoek, S.B.; Hooker, J.; Hunt, L.A.; Ingwersen, J.; Izaurralde, C.; Jongschaap, R.E.E.; Jones, J.W.; Kemanian, R.A.; Kersebaum, K.C.; Kim, S.H.; Lizaso, J.; Müller, C.; Naresh Kumar, S.; Nendel, C.; O'Leary, G.J.; Olesen, J.E.; Osborne, T.M.; Palosuo, T.; Pravia, M.V.; Priesack, E.; Ripoche, D.; Rosenzweig, C.; Ruane, A.C.; Sau, F.; Semenov, M.A.; Shcherbak, I.; Steduto, P.; Stöckle, C.O.; Stratonovitch, P.; Streck, T.; Supit, I.; Tao, F.; Teixeira, E.; Thorburn, P.; Timlin, D.; Travasso, M.; Roetter, R.P.; Waha, K.; Wallach, D.; White, J.W.; Williams, J.R.; Wolf, J.

    2015-01-01

    Many simulation studies have been carried out to predict the effect of climate change on crop yield. Typically, in such study, one or several crop models are used to simulate series of crop yield values for different climate scenarios corresponding to different hypotheses of temperature, CO2

  19. A survey of commercially available broilers marketed as organic, free-range, and conventional broilers for cooked meat yields, meat composition, and relative value.

    Science.gov (United States)

    Husak, R L; Sebranek, J G; Bregendahl, K

    2008-11-01

    The objective of this survey was to investigate qualitative and quantitative properties of meat from organic, free-range, and conventional broilers as currently provided to consumers. Fifteen broilers from 4 suppliers of each type were evaluated for raw meat yield, cooked meat yield, proximate composition, pH, color, lipid oxidation, fatty acid composition, and sensory attributes. Organic broilers yielded more dark (thigh) meat (P free-range or conventional, when compared on a raw-meat basis, but conventional and free-range broilers yielded more (P free-range or conventional. Organic breast and thigh meat was less yellow (P free-range or conventional. Fatty acid analysis showed that organic breasts and thighs were lower (P free-range and conventional broilers. Shear force measurements were less (P free-range and organic broilers. Sensory panel results indicated that thighs from conventional broilers were more tender (P free-range and organic broilers, whereas other sensory properties did not differ. At the time of the study, March through May of 2006, the average retail prices for US broilers were USD 3.19, USD 2.78, and USD 1.29 per pound (USD 7.03, USD 6.13, and USD 2.84/kg) for organic, free-range, and conventional, respectively. Whereas a difference in the fatty acid composition was the largest difference observed between retail broilers in this survey, it is important to note that diets and production environments within the study were not controlled. It is apparent that the market prices for broilers at the time of this study are not fully reflected in the quantitative and qualitative measurements included in this study. It appears that consumers may be placing significant value on more intangible attributes associated with broilers marketed as organic and free-range chicken than on those attributes measured in this study.

  20. Nutritional Value And Yield of Kallar Grass (Leptochloa Fusca Linn) Hay and Its Effect on Reproductive Performance of Awassi Ewes Using Progesterone Radioimmunoassay

    International Nuclear Information System (INIS)

    Al-Masri, M R..; Zarkawi, M.; Khalifa, K.

    2007-01-01

    Nutritional value of Kallar grass (Leptochloa fusca Linn) hay (whole plant), a salt-tolerant plant, was estimated by determinning its composition (ash, crude protein CP, crude fibre CF, ether extract EE, neutral-detergent fiber NDF, acid-detergent fiber ADF, acid-detergent lignin ADL); and the in vitro organic matter digestibility (IVOMD), metabolizable energy (ME), net energy of lactation (NEL) and gross energy (GE). Moreover, dry matter, energy and protein yields per hectar were also estimated. The effects of feeding Kallar grass hay to pregnant Awassi ewes on reproductive performance, serum progesterone changes using radioimmunoassay, and on birth and weaning weights of lambs born were also determined. Experimental ewes received daily 300 g of Kallar grass hay in addition to lentil straw and concentrates to cover their nutritional requirements. The results indicated that the nutritive components of Kallar grass were (g kg -1 dry matter): ash 96, CP 93, CF 290, EE 21, NDF 755, ADF 416 and ADL 94. IVOMD was 49.3%, and energy values (MJ kg -1 dry matter) were: GE 26.88, ME 6.41 and NEL 3.02. Dry matter and crude protein yields of Kallar grass hay were 7875 and 732 kg ha -1 , respectively, and the energy produced (MJ ha -1 ) was: GE 211680, ME 50479 and NEL 23783. Kallar grass had no effects on the reproductive performance of pregnant Awassi ewes duration, of pregnancy (150.1 ± 2.2 days), progesterone patterns, birth (4.7±1.0 kg) or on weaning weights (22.7 ± ≤ 5.5 kg) of lambs.

  1. Tumour functional sphericity from PET images: prognostic value in NSCLC and impact of delineation method.

    Science.gov (United States)

    Hatt, Mathieu; Laurent, Baptiste; Fayad, Hadi; Jaouen, Vincent; Visvikis, Dimitris; Le Rest, Catherine Cheze

    2018-04-01

    Sphericity has been proposed as a parameter for characterizing PET tumour volumes, with complementary prognostic value with respect to SUV and volume in both head and neck cancer and lung cancer. The objective of the present study was to investigate its dependency on tumour delineation and the resulting impact on its prognostic value. Five segmentation methods were considered: two thresholds (40% and 50% of SUV max ), ant colony optimization, fuzzy locally adaptive Bayesian (FLAB), and gradient-aided region-based active contour. The accuracy of each method in extracting sphericity was evaluated using a dataset of 176 simulated, phantom and clinical PET images of tumours with associated ground truth. The prognostic value of sphericity and its complementary value with respect to volume for each segmentation method was evaluated in a cohort of 87 patients with stage II/III lung cancer. Volume and associated sphericity values were dependent on the segmentation method. The correlation between segmentation accuracy and sphericity error was moderate (|ρ| from 0.24 to 0.57). The accuracy in measuring sphericity was not dependent on volume (|ρ| value, although lower than that of volume, except for that derived using FLAB for which when combined with volume showed a small improvement over volume alone (hazard ratio 2.67, compared with 2.5). Substantial differences in patient prognosis stratification were observed depending on the segmentation method used. Tumour functional sphericity was found to be dependent on the segmentation method, although the accuracy in retrieving the true sphericity was not dependent on tumour volume. In addition, even accurate segmentation can lead to an inaccurate sphericity value, and vice versa. Sphericity had similar or lower prognostic value than volume alone in the patients with lung cancer, except when determined using the FLAB method for which there was a small improvement in stratification when the parameters were combined.

  2. Measurement of fission yields for 232-Th (n,f) at 14,7 MeV by direct gamma spectrometric method

    International Nuclear Information System (INIS)

    Chouak, K.; Berrada, M.; Embarech, K.

    1994-01-01

    Fission yields for the reaction 232-Th (n,f) were measured at 14,7 MeV using the activation technique with direct gamma spectrometric method. Neutrons were produced via the T(d,n) sup 4 He reaction. The neutron fluences were determined relative to the well-known sup 2 sup 7 Al(n,p) sup 2 sup 7 Mg or sup 2 sup 7 Al(n,alpha) sup 2 sup 4 Na cross section, according to the irradiation time. Yields of fission products were determined by measuring the induced gamma ray activities of the irradiated Th foils, using a calibrated Ge(Li) detector. All necessary corrections were taken into account: self absorption, coincidence losses and natural gamma rays. Fifty six cumulative yields were measured and only twenty one corresponding results were found in the literature (Crouch,1977). A satisfactory agreement is observed between our results and the published data with the exception of the masses:A=134 and A=140. 1 tab., 2 refs. (author)

  3. Yields and isomeric ratio of xenon and krypton isotopes from thermal neutron fission of 235U

    International Nuclear Information System (INIS)

    Hsu, S.S.; Lin, J.T.; Yang, C.M.; Yu, Y.W.

    1981-01-01

    The experimental cumulative yields of 85 Kr/sup m/, 87 Kr, 88 Kr, 133 Xe/sup g/, 135 Xe/sup m/, and 135 Xe/sup g/ and the independent isomeric yield of 133 Xe/sup m/ in the thermal neutron fission of 235 U have been measured by the gas chromatographic method. The independent yields of 133 Xe/sup g/, 135 Xe/sup m/, and 135 Xe/sup g/ were deduced with the aid of 133 I and 135 I data. The isomeric yield ratios of 133 Xe and 135 Xe have been computed and compared with theoretical values since they have the same high spin state J = 11/2 - and low spin ground state J = 3/2 + . The influence of the shell effect on the fission isomeric yield ratio is discussed. From the measured independent yield of Xe isotopes plus the reported data, the Xe-isotopic distribution curve has been constructed. The curve is compared with the isotopic distribution curves of Xe isotopes formed in 11.5 GeV proton interactions with 238 U and Cs isotopes formed in 24 GeV proton interactions with 238 U. Upon fitting the yield curves we find that only those products with N/Z> or =1.48 fit a curve typical of a binary fission process

  4. Evaluation of weed control methods on sugar beet (Beta vulgaris L. yield at different levels of nitrogen

    Directory of Open Access Journals (Sweden)

    AliAsghar Chitband

    2017-03-01

    Full Text Available Introduction: Weed competition is one of the major factors which limit sugar beet production in the world. Weed – crop interactions are based on competition for water, nutrients and light and allelopathic effects may also play a small role. In sugar beet weed interference, all these factors are important too, but the light is of prime importance. Due to the fact that a lot of weeds can grow above the sugar beet canopy and reduce the amount of photosynthetic radiation reaching the crop, these weeds are stronger competitors compared to smaller weeds. In much sugar beet growing areas dicot weeds of the families Chenopodiaceae, Asteraceae, Brassicaceae and Polygonaceae are of major importance. The monocots are less important compared to dicot weeds. Competition from uncontrolled annual weeds that emerge within 8 weeks of sowing or within 4 weeks of the crop reaching the two-leaf stage can reduce root yields by 26–100% .Weeds that emerge 8 weeks after sowing, and particularly after the sugar beet plants have eight or more leaves, are less likely to affect yield. Although tractor hoeing and hand labour are still used in many production areas, herbicides have been the primary method of weed control in sugar beet. The effectiveness of pre-emergence residual herbicides decreases with reductions in rainfall or soil wet content. Therefore, less than 10 % of the total sugar beet crop is treated with pre-emergence herbicides. The remaining 90 % depends solely on a selection of post-emergence herbicides to maintain season-long weed control. The major herbicides are phenmedipham, chloridazon, metamitron. Mixtures of post-emergence, broad spectrum herbicides have to be applied to control the wide range of weed species in sugar beet crops. Materials and Methods: To study the effects of weeds control by hand weeding and herbicides combination with two selective herbicides at different levels of nitrogen application on sugar beet yield and quality

  5. Evaluation of weather-based rice yield models in India

    Science.gov (United States)

    Sudharsan, D.; Adinarayana, J.; Reddy, D. Raji; Sreenivas, G.; Ninomiya, S.; Hirafuji, M.; Kiura, T.; Tanaka, K.; Desai, U. B.; Merchant, S. N.

    2013-01-01

    The objective of this study was to compare two different rice simulation models—standalone (Decision Support System for Agrotechnology Transfer [DSSAT]) and web based (SImulation Model for RIce-Weather relations [SIMRIW])—with agrometeorological data and agronomic parameters for estimation of rice crop production in southern semi-arid tropics of India. Studies were carried out on the BPT5204 rice variety to evaluate two crop simulation models. Long-term experiments were conducted in a research farm of Acharya N G Ranga Agricultural University (ANGRAU), Hyderabad, India. Initially, the results were obtained using 4 years (1994-1997) of data with weather parameters from a local weather station to evaluate DSSAT simulated results with observed values. Linear regression models used for the purpose showed a close relationship between DSSAT and observed yield. Subsequently, yield comparisons were also carried out with SIMRIW and DSSAT, and validated with actual observed values. Realizing the correlation coefficient values of SIMRIW simulation values in acceptable limits, further rice experiments in monsoon (Kharif) and post-monsoon (Rabi) agricultural seasons (2009, 2010 and 2011) were carried out with a location-specific distributed sensor network system. These proximal systems help to simulate dry weight, leaf area index and potential yield by the Java based SIMRIW on a daily/weekly/monthly/seasonal basis. These dynamic parameters are useful to the farming community for necessary decision making in a ubiquitous manner. However, SIMRIW requires fine tuning for better results/decision making.

  6. Stability Parameters for Grain Yield and its Component Traits in Maize Hybrids of Different FAO Maturity Groups

    Directory of Open Access Journals (Sweden)

    Dragan Djurovic

    2014-12-01

    Full Text Available An objective evaluation of maize hybrids in intensive cropping systems requires identification not only of yield components and other agronomically important traits but also of stability parameters. Grain yield and its components were assessed in 11 maize hybrids with different lengths of growing season (FAO 300-700 maturity groups using analysis of variance and regression analysis at three different locations in Western Serbia. The test hybrids and locations showed significant differences in grain yield, grain moisture content at maturity, 1,000-kernel weight and ear length. A significant interaction was observed between all traits and the environment. The hybrids with higher mean values of the traits, regardless of maturity group, generally exhibited sensitivity i.e. adaptation to more favourable environmental conditions as compared to those having lower mean values. Regression coefficient (bi values for grain yield mostly suggested no significant differences relative to the mean. The medium-season hybrid gave high yields and less favourable values of stability parameters at most locations and in most years, as compared to mediumlate hybrids. As compared to medium-early hybrids, medium-late hybrids (FAO 600 and 700 mostly exhibited unfavourable values of stability parameters i.e. a specific response and better adaptation to favourable environmental conditions, and gave higher average yields. Apart from producing lower average yields, FAO 300 and 400 hybrids showed higher yield stability as compared to the other hybrids tested. Medium-late hybrids had higher yields and showed a better response to favourable environmental conditions compared to early-maturing hybrids. Therefore, they can be recommended for intensive cultural practices and low-stress environments. Due to their more favourable stability parameter values, medium-early hybrids can be recommended for low-intensity cultural practices and stressful environments.

  7. Near-Infrared Spectroscopy Combined with Multivariate Calibration to Predict the Yield of Sesame Oil Produced by Traditional Aqueous Extraction Process

    Directory of Open Access Journals (Sweden)

    Yong-Dong Xu

    2017-01-01

    Full Text Available Sesame oil produced by the traditional aqueous extraction process (TAEP has been recognized by its pleasant flavor and high nutrition value. This paper developed a rapid and nondestructive method to predict the sesame oil yield by TAEP using near-infrared (NIR spectroscopy. A collection of 145 sesame seed samples was measured by NIR spectroscopy and the relationship between the TAEP oil yield and the spectra was modeled by least-squares support vector machine (LS-SVM. Smoothing, taking second derivatives (D2, and standard normal variate (SNV transformation were performed to remove the unwanted variations in the raw spectra. The results indicated that D2-LS-SVM (4000–9000 cm−1 obtained the most accurate calibration model with root mean square error of prediction (RMSEP of 1.15 (%, w/w. Moreover, the RMSEP was not significantly influenced by different initial values of LS-SVM parameters. The calibration model could be helpful to search for sesame seeds with higher TAEP oil yields.

  8. Effect of Limited Irrigation on Yield and Yield Component of Several Sweet Corn (Zea mays L.var Saccharata Varieties

    Directory of Open Access Journals (Sweden)

    Sh Ghazian Tafrishi

    2013-08-01

    Full Text Available A randomized complete block design with four replications and a split plot arrangement was conducted in 2010, in order to study the effect of limited irrigation on yield and yield component of sweet corn. Water levels were (100%, 80%, and 60% replacement of plant water requirement which served as main plots. Subplot was a factorial arrangement of three different sweet corn varieties (Merit, Obsession and KSC403 with two planting methods (raised bed and furrow planting. The evaluated traits were ear length, ear diameter, kernels number per row, seed rows per ear, kernel depth, seed thousands weight, kernel yield, shoot biomass, harvest index and Anthesis- silking interval. Results show that limited irrigation significantly decreased all measured characteristics but harvest index. Effect of varieties was significant on evaluated traits too. Kernel weight and seed depth were significantly affected by interaction between variety and planting method. The highest yield was found for 100% replacement of water requirement irrigation level whit 15.2 tones per hectare kernel weight and the lowest belongs to 60% replacement of water requirement by 8.6 tones per hectare kernel weight. Merit and KSC 403 produces the highest (15.9 ton/ha and lowest (8.8 ton/ha seed yield, respectively. Harvest index of different varieties were not affected by irrigation regime. Results show that, in whole, limited irrigation, decreased seed yield in all varieties by affecting diverse yield component.

  9. Efficient Return Algorithms For Associated Plasticity With Multiple Yield Planes

    DEFF Research Database (Denmark)

    Clausen, Johan Christian; Damkilde, Lars; Andersen, Lars

    2006-01-01

    of such criteria. The return formulae are in closed form and no iteration is required. The method accounts for three types of stress return: Return to a single yield plane, to a discontinuity line at the intersection of two yield planes and to a discontinuity point at the intersection between three or more yield...... planes. The infinitesimal and the consistent elastoplastic constitutive matrix are calculated for each type of stress return, as are the conditions to ascertain which type of return is required. The method is exemplified with the Mohr-Coulomb yield criterion....

  10. Multiple linear regression and artificial neural networks for delta-endotoxin and protease yields modelling of Bacillus thuringiensis.

    Science.gov (United States)

    Ennouri, Karim; Ben Ayed, Rayda; Triki, Mohamed Ali; Ottaviani, Ennio; Mazzarello, Maura; Hertelli, Fathi; Zouari, Nabil

    2017-07-01

    The aim of the present work was to develop a model that supplies accurate predictions of the yields of delta-endotoxins and proteases produced by B. thuringiensis var. kurstaki HD-1. Using available medium ingredients as variables, a mathematical method, based on Plackett-Burman design (PB), was employed to analyze and compare data generated by the Bootstrap method and processed by multiple linear regressions (MLR) and artificial neural networks (ANN) including multilayer perceptron (MLP) and radial basis function (RBF) models. The predictive ability of these models was evaluated by comparison of output data through the determination of coefficient (R 2 ) and mean square error (MSE) values. The results demonstrate that the prediction of the yields of delta-endotoxin and protease was more accurate by ANN technique (87 and 89% for delta-endotoxin and protease determination coefficients, respectively) when compared with MLR method (73.1 and 77.2% for delta-endotoxin and protease determination coefficients, respectively), suggesting that the proposed ANNs, especially MLP, is a suitable new approach for determining yields of bacterial products that allow us to make more appropriate predictions in a shorter time and with less engineering effort.

  11. Mammography performance in Oman: Review of factors influencing cancer yield and positive predictive value.

    Science.gov (United States)

    Taif, Sawsan; Tufail, Fatma; Alnuaimi, Ahmed Sameer

    2016-06-01

    The aim of this study is to assess mammography performance in Oman by estimating the breast cancer rate and the positive predictive value (PPV) with the influence of some variables. This cross-sectional study was conducted on mammograms done in one of the three main breast imaging centers in Oman between January 2008 and July 2012. Diagnostic and screening groups were identified and assessed separately. Rate of abnormal mammograms, rate of breast cancer and the PPV were estimated according to Breast Imaging Reporting and Data System (BIRADS) score, presence of breast lump and patient's age. Total of 653 mammograms were included, 254 diagnostic and 399 screening. Abnormal mammograms (BIRADS 4 and 5) form 31.9% of the diagnostic examinations compared with 6.8% of screening examinations. Breast cancer was present in 17.9% of the diagnostic compared with 1.0% of the screening group. The PPV of BIRADS 5 was 94.1%, and for BIRADS 4 was 37.1 and 26.7% for diagnostic and screening studies. Overall PPV for abnormal mammograms was 65.2% in the diagnostic and 26.7% in the screening group. Mammography PPV shows positive association with age (P = 0.039) while presence of breast lump has no significant effect on the PPV (P = 0.38). BIRADS 5 score was found to have a high cancer yield making it a strong predictor of cancer. Different results were obtained in the diagnostic compared with screening mammography with higher rates of abnormal mammograms and breast cancer. Mammography performance should be better in the older women. © 2014 Wiley Publishing Asia Pty Ltd.

  12. Adjusting slash pine growth and yield for silvicultural treatments

    Science.gov (United States)

    Stephen R. Logan; Barry D. Shiver

    2006-01-01

    With intensive silvicultural treatments such as fertilization and competition control now commonplace in today's slash pine (Pinus elliottii Engelm.) plantations, a method to adjust current growth and yield models is required to accurately account for yield increases due to these practices. Some commonly used ad-hoc methods, such as raising site...

  13. Computing interval-valued reliability measures: application of optimal control methods

    DEFF Research Database (Denmark)

    Kozin, Igor; Krymsky, Victor

    2017-01-01

    The paper describes an approach to deriving interval-valued reliability measures given partial statistical information on the occurrence of failures. We apply methods of optimal control theory, in particular, Pontryagin’s principle of maximum to solve the non-linear optimisation problem and derive...... the probabilistic interval-valued quantities of interest. It is proven that the optimisation problem can be translated into another problem statement that can be solved on the class of piecewise continuous probability density functions (pdfs). This class often consists of piecewise exponential pdfs which appear...... as soon as among the constraints there are bounds on a failure rate of a component under consideration. Finding the number of switching points of the piecewise continuous pdfs and their values becomes the focus of the approach described in the paper. Examples are provided....

  14. Brittleness and Packing Density Effects on Blast-hole Cuttings Yield of Selected Rocks

    Directory of Open Access Journals (Sweden)

    B. Adebayo

    2016-06-01

    Full Text Available This paper evaluates brittleness and packing density to analysis their effects on blast-hole cutting yield for three selected rocks in Nigeria. Brittleness test (S20 was carried out in accordance with Norwegian Soil and Rock Engineering and the Brittleness Index (BI for the selected rocks were estimated. The packing density determined from the photomicrograph of the rock samples. The grain size of 45 blast-holes drill cuttings collected from three selected while drilling of these rocks were determined using standard method of America Society for Testing and Materials (ASTM D 2487. The brittleness values are 50%, 44% and 42% for micro granite, porphyritic granite and medium biotite granite respectively. The result of BI varied from 10.32 – 11.59 and they are rated as moderately brittle rocks. The values of packing density varied from 92.20 – 94.55%, 91.00 -92.96% and 92.92 – 94.96% for all the rocks. The maximum weights of blast-hole particle size retained at 75 µm are 106.00g, 103.28 g and 99.76 g for medium biotite granite, micro granite and porhyritic granite respectively. Packing density values have correlation to some extent with (S20 values hence, this influence the yield of blast-hole cuttings as drilling progresses. The minimum weight of blast-hole cuttings particle size retained at 150 µm agrees with brittleness index classification for micro granite.

  15. New approach for regional crop yield gap analysis in the Borujen ...

    African Journals Online (AJOL)

    enoh

    2012-03-20

    Mar 20, 2012 ... for model calibration and evaluation of WOFOST as a crop growth ... In general, simulated results matched well with the measured ... regional-scale yield prediction and assessment (Jagtap ... the benchmark value and most of the variation in yield ... The model simulates daily crop growth rate, based on.

  16. Method for data compression by associating complex numbers with files of data values

    Science.gov (United States)

    Feo, John Thomas; Hanks, David Carlton; Kraay, Thomas Arthur

    1998-02-10

    A method for compressing data for storage or transmission. Given a complex polynomial and a value assigned to each root, a root generated data file (RGDF) is created, one entry at a time. Each entry is mapped to a point in a complex plane. An iterative root finding technique is used to map the coordinates of the point to the coordinates of one of the roots of the polynomial. The value associated with that root is assigned to the entry. An equational data compression (EDC) method reverses this procedure. Given a target data file, the EDC method uses a search algorithm to calculate a set of m complex numbers and a value map that will generate the target data file. The error between a simple target data file and generated data file is typically less than 10%. Data files can be transmitted or stored without loss by transmitting the m complex numbers, their associated values, and an error file whose size is at most one-tenth of the size of the input data file.

  17. IMPORTANCE OF EARNED VALUE METHOD (EVA IN THE PERFORMANCE ANALYSIS OF PROJECTS

    Directory of Open Access Journals (Sweden)

    MARGARITA JANESKA

    2016-04-01

    Full Text Available The economics of the projects is an important process in the project management. Effective control of projects is based on appropriate methods for monitoring, and the entire project, the timetable, cost, quality and risk. Unlike accounting aspects in project management are looking for information that allow insight into the status and trends of financial progress of the project. Such information provide a method of earned value. It is a key component for assessing the actual performance of the project. The method of earned value is a better indicator of the progress of the project in comparison to the classical method of comparing planned and actual costs. This method shows the profit in relation to actual costs at a specific time point. This method is the basis for calculating the index of the project performance. In this sense, MS Project provides many opportunities for quality control and monitoring of the realization of the projects. In this study will be described the architecture of this method, outlined the benefits of the application of this method, and the basic criteria that should satisfy project management to be able to apply it.

  18. A Review of Methods for Analysis of the Expected Value of Information.

    Science.gov (United States)

    Heath, Anna; Manolopoulou, Ioanna; Baio, Gianluca

    2017-10-01

    In recent years, value-of-information analysis has become more widespread in health economic evaluations, specifically as a tool to guide further research and perform probabilistic sensitivity analysis. This is partly due to methodological advancements allowing for the fast computation of a typical summary known as the expected value of partial perfect information (EVPPI). A recent review discussed some approximation methods for calculating the EVPPI, but as the research has been active over the intervening years, that review does not discuss some key estimation methods. Therefore, this paper presents a comprehensive review of these new methods. We begin by providing the technical details of these computation methods. We then present two case studies in order to compare the estimation performance of these new methods. We conclude that a method based on nonparametric regression offers the best method for calculating the EVPPI in terms of accuracy, computational time, and ease of implementation. This means that the EVPPI can now be used practically in health economic evaluations, especially as all the methods are developed in parallel with R functions and a web app to aid practitioners.

  19. Yield and tillering response of super hybrid rice Liangyoupeijiu to tillage and establishment methods

    Directory of Open Access Journals (Sweden)

    M.A. Badshah

    2014-02-01

    Full Text Available Tillering is an important agronomic trait for rice grain production. To evaluate yield and tillering response, Liangyoupeijiu (super hybrid rice was grown in Hunan, China during 2011–2012 under different methods of tillage (conventional and no-tillage system and crop establishment methods (transplanting at a spacing of 20 cm × 20 cm with one seedling per hill and direct seeding at a seeding rate of 22.5 kg ha− 1. Our results revealed that, at maximum tillering (Max. and at maturity (MA stages, direct seeding (DS resulted in 22% more tillers than transplanting (TP irrespective of tillage system. Tiller mortality reached a peak between panicle initiation (PI and booting (BT stages, and was 16% higher under conventional tillage (CT than under no-tillage (NT. Transplanting required 29% more time for the completion of tillering and less for DS. Tillering rate was 43% higher in DS than TP under either CT or NT. There was a positive correlation between panicle number per m2 and maximum tiller number per m2, but not panicle-bearing tiller rate. The panicle bearing tiller rate was higher under DS than TP and higher under NT than CT. Tiller dry weight gradually increased up to heading (HD stage, and was 14% higher under TP than DS. Leaf area (cm2 tiller− 1 gradually increased from Max. to HD stage and then decreased by 34% in conventional tillage transplanting (CTTP and 45% in no-tillage transplanting (NTTP from 12DAH–24DAH (days after heading, but was similar (35% under DS under either CT or NT. Grain yield was higher under CTTP owing to the larger sink size (heavier panicle, more spikelets in per cm length of panicle than under DS.

  20. Métodos para a estimativa do potencial de rendimento da soja durante a ontogenia Methods for estimating the soybean potential yield during ontogeny

    Directory of Open Access Journals (Sweden)

    João Leonardo Fernandes Pires

    2005-04-01

    Full Text Available O objetivo deste trabalho foi estudar métodos para a estimativa do potencial de rendimento da soja durante a ontogenia. Os experimentos foram realizados em Eldorado do Sul, RS, durante as safras de 1996/1997, 1999/2000 e 2000/2001. Os tratamentos constaram de cinco cultivares de soja, FT-Saray, IAS 5, IAS 4, FT-Abyara e FEPAGRO RS-10. Cinco métodos foram utilizados para estimar o rendimento que seria obtido se todas as estruturas reprodutivas presentes no florescimento e no início do enchimento de grãos, produzissem grãos na maturação. O potencial de rendimento no florescimento e no enchimento de grãos, apresentou alta correlação com o número de flores e estruturas reprodutivas, respectivamente. Verificou-se, também, correspondência entre os métodos. Não houve, na maioria das vezes, correlações significativas entre o potencial, no florescimento e enchimento de grãos, e o rendimento de grãos na maturação. Os métodos estudados constituem ferramentas importantes para o manejo, quando utilizados para comparar o potencial de rendimento durante a ontogenia.The objective of this work was to study methods to estimate the soybean potential yield during ontogeny. The experiments were performed in Eldorado do Sul, RS, during the growing seasons of 1996/1997, 1999/2000 and 2000/2001. The treatments consisted of five soybean cultivars, FT-Saray, IAS 5, IAS 4, FT-Abyara and FEPAGRO RS-10. It was calculated the potential yield of each cultivar, by five methods, in order to estimate the yield that would be obtained if all the reproductive structures during flowering and beginning of pod filling produced grains at the maturity. Potential yield (during flowering and pod filling presented a high correlation with the number of flowers and reproductive structures, respectively. It was also found a correspondence among the methods. Most of the time, it did not occurred significant correlations between potential (during flowering and pod filling

  1. An Interval-Valued Intuitionistic Fuzzy TOPSIS Method Based on an Improved Score Function

    Directory of Open Access Journals (Sweden)

    Zhi-yong Bai

    2013-01-01

    Full Text Available This paper proposes an improved score function for the effective ranking order of interval-valued intuitionistic fuzzy sets (IVIFSs and an interval-valued intuitionistic fuzzy TOPSIS method based on the score function to solve multicriteria decision-making problems in which all the preference information provided by decision-makers is expressed as interval-valued intuitionistic fuzzy decision matrices where each of the elements is characterized by IVIFS value and the information about criterion weights is known. We apply the proposed score function to calculate the separation measures of each alternative from the positive and negative ideal solutions to determine the relative closeness coefficients. According to the values of the closeness coefficients, the alternatives can be ranked and the most desirable one(s can be selected in the decision-making process. Finally, two illustrative examples for multicriteria fuzzy decision-making problems of alternatives are used as a demonstration of the applications and the effectiveness of the proposed decision-making method.

  2. Comparison of stability statistics for yield in barley (Hordeum vulgare ...

    African Journals Online (AJOL)

    STORAGESEVER

    2010-03-15

    Mar 15, 2010 ... statistics and yield indicated that only TOP method would be useful for simultaneously selecting for high yield and ... metric stability methods; i) they reduce the bias caused by outliers, ii) ...... Biometrics, 43: 45-53. Sabaghnia N ...

  3. Long Term Evaluation of Yield Stability Trend for Cereal Crops in Iran

    Directory of Open Access Journals (Sweden)

    mehdi nassiri mahalati

    2016-05-01

    Full Text Available During the last few decades cereals yield have increased drastically at the national level however, information about yield stability and its resistance to annual environmental variability are scare. In this study long term stability of grin yield of wheat, barley, rice, corn and overall cereals in Iran were evaluated during a 40-year period (1971-2011. Stability analysis was conducted using two different methods. In the first method the residuals of regression between crop yield and time (years were calculated as stability index. For this different segmented regression models including linear, bi-linear and tri-linear were fitted to yield trend data and the best model for each crop was selected based on statistical measures. Absolute residuals (the difference between actual and predicted yields for each year as well as relative residuals (absolute residuals as percent of predicted yield were estimated. In the second method yield stability was estimated from the slope of the regression line between average annual yield of all cereals (environmental index and the yield of each crop in the same year. Results indicted that in wheat and barley absolute and relative residuals were increased during the study period leading to reduction of stability despite considerable yield increment. However, for rice and corn residuals followed a decreasing trend and therefore yield stability of these crops was increased during the last 40 years. The same result was obtained with the environmental index but in this method reduction of yield stability in barley was lower than wheat. Based on the results, yield and yield stability of cereals crops in Iran increased during the last 40 years. However, the percentage increase in stability is lower than that of yield. Application of nitrogen fertilizers was led to reduction in stability. Yield stability of wheat, barley, rice, corn and overall cereals was improved with increasing their cultivated area.

  4. An Analytically Tractable Model for Pricing Multiasset Options with Correlated Jump-Diffusion Equity Processes and a Two-Factor Stochastic Yield Curve

    Directory of Open Access Journals (Sweden)

    Tristan Guillaume

    2016-01-01

    Full Text Available This paper shows how to value multiasset options analytically in a modeling framework that combines both continuous and discontinuous variations in the underlying equity or foreign exchange processes and a stochastic, two-factor yield curve. All correlations are taken into account, between the factors driving the yield curve, between fixed income and equity as asset classes, and between the individual equity assets themselves. The valuation method is applied to three of the most popular two-asset options.

  5. Small Scale Yielding Correction of Constraint Loss in Small Sized Fracture Toughness Test Specimens

    International Nuclear Information System (INIS)

    Kim, Maan Won; Kim, Min Chul; Lee, Bong Sang; Hong, Jun Hwa

    2005-01-01

    Fracture toughness data in the ductile-brittle transition region of ferritic steels show scatter produced by local sampling effects and specimen geometry dependence which results from relaxation in crack tip constraint. The ASTM E1921 provides a standard test method to define the median toughness temperature curve, so called Master Curve, for the material corresponding to a 1T crack front length and also defines a reference temperature, T 0 , at which median toughness value is 100 MPam for a 1T size specimen. The ASTM E1921 procedures assume that high constraint, small scaling yielding (SSY) conditions prevail at fracture along the crack front. Violation of the SSY assumption occurs most often during tests of smaller specimens. Constraint loss in such cases leads to higher toughness values and thus lower T 0 values. When applied to a structure with low constraint geometry, the standard fracture toughness estimates may lead to strongly over-conservative estimates. A lot of efforts have been made to adjust the constraint effect. In this work, we applied a small-scale yielding correction (SSYC) to adjust the constraint loss of 1/3PCVN and PCVN specimens which are relatively smaller than 1T size specimen at the fracture toughness Master Curve test

  6. Manure placement method influenced growth, phenology and bunch yield of three Musagenotypes in a humid zone of Southern Nigeria

    OpenAIRE

    A. Tenkouano; O. O. Ndukwe; K. P. Baiyeri

    2013-01-01

    Manure placement methods earlier evaluated in a greenhouse using the banana cultivar PITA 14 as a test-crop significantly influenced root system development, vegetative growth, nutrient uptake, whole plant dry matter yield and distribution of the crop. These placement methods plus an additional treatment were re-evaluated in a field experiment over two cropping cycles using three Musa genotypes. The treatments were: a full dose of poultry manure placed on the soil surface – top dressing(T1),a...

  7. Effects of planting method on agronomic characteristics, yield and yield components of sweet and super sweet corn (Zea mays L. varieties under saline conditions

    Directory of Open Access Journals (Sweden)

    F. Faridi

    2016-05-01

    Full Text Available In order to evaluate the effects of planting pattern on morphological, Phonological, yield and yield components of sweet and super sweet corn (Zea mays L. varieties under saline conditions, a field experiment was conducted as split plots based on a randomized complete block design with four replications. Planting pattern in 3 levels included one row in ridge, two row in ridge and furrow planting, as a main plot and varieties in 4 levels sweet corn with 2 types (KSc 403 su, Merit and super sweet with two types (Basin, obsession as sub plots. The results showed that planting pattern had significant differences on plant height, ear height, leaf length, leaf width, number of kernel per row, number of rows per ear and 1000-kernel weight. but had no significant effects on the length of tassel, number of leaf/plant, number of leaf per plant above ear, stem diameter, time of anthesis, time of silking, anthesis silking interval ASI, grain yield, biological yield and harvest index. Different varieties had significant effects on the total characteristics studied except number of leaf above ear and stem diameter. Most of the conservable grain yield and harvest index was in Obsession variety (10 kg and 39%, respectively and the least was seen in Basin (4 kg and 20%, respectively. The result showed that use of furrow planting pattern for sweet and super sweet corn in saline conditions can effects result in higher yield.

  8. Application of Molecular Topology for the Prediction of Reaction Yields and Anti-Inflammatory Activity of Heterocyclic Amidine Derivatives

    Directory of Open Access Journals (Sweden)

    Ramón García-Domenech

    2011-02-01

    Full Text Available Topological-mathematical models based on multiple linear regression analyses have been built to predict the reaction yields and the anti-inflammatory activity of a set of heterocylic amidine derivatives, synthesized under environmental friendly conditions, using microwave irradiation. Two models with three variables each were selected. The models were validated by cross-validation and randomization tests. The final outcome demonstrates a good agreement between the predicted and experimental results, confirming the robustness of the method. These models also enabled the screening of virtual libraries for new amidine derivatives predicted to show higher values of reaction yields and anti-inflammatory activity.

  9. Analysis of Reference Cigarette Smoke Yield Data From 21 Laboratories for 28 Selected Analytes as a Guide to Selection of New Coresta Recommended Methods

    Directory of Open Access Journals (Sweden)

    Purkis Steve

    2014-07-01

    Full Text Available Since 1999, the CORESTA Special Analytes Sub Group (SPA SG has been working on the development of CORESTA Recommended Methods (CRMs for the analysis of cigarette smoke components. All CRMs have been posted on the CORESTA website and several associated papers published. In this study, 21 laboratories shared data and in-house methodologies for 28 additional smoke components of regulatory interest to prioritise the development of further CRMs. Laboratories provided data, where available, from CORESTA monitor test pieces (CM6 and CM7 and Kentucky Reference Cigarettes (1R5F / 3R4F covering the period 2010-2012 obtained under both the ISO 3308 and Health Canada Intense regimes. Scant data were available on the CORESTA monitor test pieces and the Kentucky 1R5F reference. The greatest amount of data was obtained on the Kentucky 3R4F and this was used in the analyses described in this paper. SPA SG discussions provided invaluable insight into identifying causes and ways of reducing inter-laboratory variability which will be investigated in joint experiments before embarking on final collaborative studies using draft CRMs to obtain mean yields, repeatability and reproducibility values. Phenolic compounds (phenol, 3 cresol isomers, hydroquinone, catechol and resorcinol gave consistent results by liquid chromatography (LC separation and fluorescence detection after extracting collected “tar” on a Cambridge filter pad (CFP. Yields were similar to those obtained by a derivatisation method followed by gas chromatography - mass spectrometry (GC-MS analysis. Similar ratios of phenols were also obtained from each method. Of the 28 studied analytes, the between-laboratory variability was lowest for the phenols. Hydrogen cyanide was derivatised using various reagents and the colour development measured after continuous flow analysis (CFA by ultra-violet absorbance. Although, methodologies gave reasonably consistent results, investigations on the trapping system

  10. Research on the Value Evaluation of Used Pure Electric Car Based on the Replacement Cost Method

    Science.gov (United States)

    Tan, zhengping; Cai, yun; Wang, yidong; Mao, pan

    2018-03-01

    In this paper, the value evaluation of the used pure electric car is carried out by the replacement cost method, which fills the blank of the value evaluation of the electric vehicle. The basic principle of using the replacement cost method, combined with the actual cost of pure electric cars, puts forward the calculation method of second-hand electric car into a new rate based on the use of AHP method to construct the weight matrix comprehensive adjustment coefficient of related factors, the improved method of value evaluation system for second-hand car

  11. VALUE-MOTIVATIONAL COMPONENT OF METHODICAL CULTURE OF PRIMARY SCHOOL TEACHER: THE ESSENCE AND WAYS OF FORMATION

    Directory of Open Access Journals (Sweden)

    Natalia Nikula

    2017-03-01

    Full Text Available One of the main conditions of formation of methodological culture of primary school teacher, a factor that encourages the assimilation of effective models of professional and methodical activity is value-motivational component. In order to clearly understand the content of the phenomenon appointed its author selected criteria: system values orientation and professional and personal motivation. The value orientation as a set of values focus on professional and methodological activities which manifest themselves in individual positive attitude of students to it is determined on the base of the analysis of scientific and pedagogical sources. The indicators of value orientations are: human values (truth, goodness, beauty, life and health; personal values of teachers (humanity, justice, diligence, responsibility; teacher professional values (commitment, independence, initiative, organization, value orientation on professional and methodical activities. The essence of professional and personal motivation as individual education teacher's personality, which includes professional and personal motives, interests, needs, formation of which is a clear reference and internal impetus for the formation of methodological culture. The indicators of this criterion are: professional and methodical motivation; methodically-focused orientation teacher; interest in the success in professional and methodical work of the teacher; the need for professional self-realization and self-affirmation; desire career advancement; focus on student mastery of methodological culture. The system measure of the formation of values and motivational component: discussions, exercises, training exercises, collective creative discussion, a role play, a workshop is analysed.

  12. Methods of developing core collections based on the predicted genotypic value of rice ( Oryza sativa L.).

    Science.gov (United States)

    Li, C T; Shi, C H; Wu, J G; Xu, H M; Zhang, H Z; Ren, Y L

    2004-04-01

    The selection of an appropriate sampling strategy and a clustering method is important in the construction of core collections based on predicted genotypic values in order to retain the greatest degree of genetic diversity of the initial collection. In this study, methods of developing rice core collections were evaluated based on the predicted genotypic values for 992 rice varieties with 13 quantitative traits. The genotypic values of the traits were predicted by the adjusted unbiased prediction (AUP) method. Based on the predicted genotypic values, Mahalanobis distances were calculated and employed to measure the genetic similarities among the rice varieties. Six hierarchical clustering methods, including the single linkage, median linkage, centroid, unweighted pair-group average, weighted pair-group average and flexible-beta methods, were combined with random, preferred and deviation sampling to develop 18 core collections of rice germplasm. The results show that the deviation sampling strategy in combination with the unweighted pair-group average method of hierarchical clustering retains the greatest degree of genetic diversities of the initial collection. The core collections sampled using predicted genotypic values had more genetic diversity than those based on phenotypic values.

  13. Evaluation of yield and yield components and some agronomic traits of white bean genotypes under Karaj climate

    Directory of Open Access Journals (Sweden)

    M. Ebrahimi

    2016-04-01

    Full Text Available In order to study compatibility of 30 white bean genotypes under Karaj climate, an experiment was conducted based on randomized Complete Block Design with four replications. Evaluation and statistical analysis was performed for 18 important traits. Analysis of variance results showed that there are significant differences between varieties for all traits. Results of genotypes means comparison with Duncan’s multiple range test showed that genotype No. 29 was better than others in plant height, yield, and biological yield, seed no. per plant and pod weight traits. Simple correlation coefficients were significant between yield and weight of pod, biological yield, number of seed per plant, number of pod per plant, plant height, width of pod and number of seed per pod. Only pod length was negative correlated with yield between all investigated traits. Cluster analysis with UPGMA method arrangement genotypes into three groups. According to this experiment results we can recommend 29 and 30 genotypes for Karaj condition

  14. Inheritance of seed yield and related traits in some lentil (lens culinaris medik) genotypes

    International Nuclear Information System (INIS)

    Rasheed, S.; Hanif, M.; Sadiq, S.; Abbas, G.; Asghar, M.J.; Haq, M.A.

    2008-01-01

    The study was conducted at Nuclear Institute for Agriculture and Biology (NIAB), Faisalabad during the year 2006-2007. Fifteen lentil lines/varieties were evaluated to exploit yield components to the maximum extent and to formulate section criteria for the improvement of seed yield. Significant genetic variation was observed for all the traits. All the traits under study had high heritability values except number of primary branches. Higher values of heritability coupled with genetic advance were observed for seed yield (98.30%, 128.20%), harvest index (97.10%, 79.40%), biological yield (94.30%, 56.10%) and hundred seed weight (88.30%, 50.80%) which indicates The role of additive genes to control these traits. Hundred seed weight (0.67, 0.65), harvest index (0.94, 0.93) and Biological yield (0.81, 0.80) had positive and highly significant correlation with seed yield at both genotypic and phenotypic levels. Number of primary branches, hundred seed weight, harvest index and biological yield showed positive direct effect along with positive genotypic correlation with seed yield. Finally, it was concluded that the traits like hundred seed weight, harvest index and biological yield can be exploited for the improvement of seed yield in lentil. (author)

  15. [Yield of starch extraction from plantain (Musa paradisiaca). Pilot plant study].

    Science.gov (United States)

    Flores-Gorosquera, Emigdia; García-Suárez, Francisco J; Flores-Huicochea, Emmanuel; Núñez-Santiago, María C; González-Soto, Rosalia A; Bello-Pérez, Luis A

    2004-01-01

    In México, the banana (Musa paradisiaca) is cooked (boiling or deep frying) before being eaten, but the consumption is not very popular and a big quantity of the product is lost after harvesting. The unripe plantain has a high level of starch and due to this the use of banana can be diversified as raw material for starch isolation. The objective of this work was to study the starch yield at pilot plant scale. Experiments at laboratory scale were carried out using the pulp with citric acid to 0,3 % (antioxidant), in order to evaluate the different unitary operations of the process. The starch yield, based on starch presence in the pulp that can be isolated, were between 76 and 86 %, and the values at pilot plant scale were between 63 and 71 %, in different lots of banana fruit. Starch yield values were similar among the diverse lots, showing that the process is reproducible. The lower values of starch recovery at pilot plant scale are due to the loss during sieving operations; however, the amount of starch recovery is good.

  16. Positronium Yields in Liquids Determined by Lifetime and Angular Correlation Measurements

    DEFF Research Database (Denmark)

    Mogensen, O. E.; Jacobsen, F. M.

    1982-01-01

    hydrocarbons), 3.2 (average value for 8 aromatic hydrocarbons), 2.6 (average value for 5 alcohols). Values of this ratio for various other liquids are also given. The results for the mixtures show how I'3 and I'1, vary as the Ps formation is inhibited (CCl4 mixtures) or enhanced C6F6 mixtures). The most......Positron lifetime and angular correlation spectra were measured for 36 pure liquids, CCl4 mixtures with hexane and diethylether, and C6F6 mixtures with hexane. Apparent ortho-Ps yields, I'3, were determined as the intensity of the long-lived component in the lifetime spectra, while the apparent...... para-Ps yields, I'3, were obtained as the intensity of the narrowest gaussian in a three-gaussian fit to the angular correlation spectra. The ratio I'3/I1, expected to be 3, was found to be instead 2.3 (average value for 3 ethers), 2.5 (average value for 10 linear, branched, and cyclic aliphatic...

  17. Tumour functional sphericity from PET images. Prognostic value in NSCLC and impact of delineation method

    Energy Technology Data Exchange (ETDEWEB)

    Hatt, Mathieu; Laurent, Baptiste; Fayad, Hadi; Jaouen, Vincent; Visvikis, Dimitris [LaTIM, INSERM, UMR 1101, IBSAM, UBO, UBL, Brest (France); Cheze Le Rest, Catherine [LaTIM, INSERM, UMR 1101, IBSAM, UBO, UBL, Brest (France); CHU Miletrie, Department of Nuclear Medicine, Poitiers (France)

    2018-04-15

    Sphericity has been proposed as a parameter for characterizing PET tumour volumes, with complementary prognostic value with respect to SUV and volume in both head and neck cancer and lung cancer. The objective of the present study was to investigate its dependency on tumour delineation and the resulting impact on its prognostic value. Five segmentation methods were considered: two thresholds (40% and 50% of SUV{sub max}), ant colony optimization, fuzzy locally adaptive Bayesian (FLAB), and gradient-aided region-based active contour. The accuracy of each method in extracting sphericity was evaluated using a dataset of 176 simulated, phantom and clinical PET images of tumours with associated ground truth. The prognostic value of sphericity and its complementary value with respect to volume for each segmentation method was evaluated in a cohort of 87 patients with stage II/III lung cancer. Volume and associated sphericity values were dependent on the segmentation method. The correlation between segmentation accuracy and sphericity error was moderate (ρ from 0.24 to 0.57). The accuracy in measuring sphericity was not dependent on volume (ρ < 0.4). In the patients with lung cancer, sphericity had prognostic value, although lower than that of volume, except for that derived using FLAB for which when combined with volume showed a small improvement over volume alone (hazard ratio 2.67, compared with 2.5). Substantial differences in patient prognosis stratification were observed depending on the segmentation method used. Tumour functional sphericity was found to be dependent on the segmentation method, although the accuracy in retrieving the true sphericity was not dependent on tumour volume. In addition, even accurate segmentation can lead to an inaccurate sphericity value, and vice versa. Sphericity had similar or lower prognostic value than volume alone in the patients with lung cancer, except when determined using the FLAB method for which there was a small

  18. Improved Steganographic Method Preserving Pixel-Value Differencing Histogram with Modulus Function

    Directory of Open Access Journals (Sweden)

    Heung-Kyu Lee

    2010-01-01

    Full Text Available We herein advance a secure steganographic algorithm that uses a turnover policy and a novel adjusting process. Although the method of Wang et al. uses Pixel-Value Differencing (PVD and their modulus function provides high capacity and good image quality, the embedding process causes a number of artifacts, such as abnormal increases and fluctuations in the PVD histogram, which may reveal the existence of the hidden message. In order to enhance the security of the algorithm, a turnover policy is used that prevents abnormal increases in the histogram values and a novel adjusting process is devised to remove the fluctuations at the border of the subrange in the PVD histogram. The proposed method therefore eliminates all the weaknesses of the PVD steganographic methods thus far proposed and guarantees secure communication. In the experiments described herein, the proposed algorithm is compared with other PVD steganographic algorithms by using well-known steganalysis techniques, such as RS-analysis, steganalysis for LSB matching, and histogram-based attacks. The results support our contention that the proposed method enhances security by keeping the PVD histogram similar to the cover, while also providing high embedding capacity and good imperceptibility to the naked eye.

  19. Systematics of spallation yields with a four-parameter formula

    International Nuclear Information System (INIS)

    Foshina, M.; Martins, J.B.; Tavares, O.A.P.; Di Napoli, V.

    1982-01-01

    A semi-empirical four-parameter formula is proposed in order to systematize intermediate- and high-energy proton-induced spallation yields of target nuclei covering the 50-100 mass number interval. The measured yields are reproduced by the formula with a degree of accuracy which is comparable with or better than those obtained in previous proton-spallation systematics. The formula predicts reliable values for the most probable mass number of isotopic distributions. For a number of irradiation conditions which may be encountered in practical and physical applications, estimates of proton spallation yields can be obtained by the proposed four-parameter formula with no need of high-speed machines. (M.A.F.) [pt

  20. Photovoltaic yield: correction method for the mismatch between the solar spectrum and the reference ASTMG AM1.5G spectrum

    Directory of Open Access Journals (Sweden)

    Mambrini Thomas

    2015-01-01

    Full Text Available We propose a method for a spectral correction of the predicted PV yield and we show the importance of the spectral mismatch on the solar cell. Indeed, currently predicted PV yield are made considering solar irradiation, ambient temperature, incidence angle and partially (or not the solar spectrum. However, the solar spectrum is not always the same. It varies depending on the site location, atmospheric conditions, time of the day...This may impact the photovoltaic solar cells differently according to their technology (crystalline Silicon, thin film, multi-junctions... This paper presents a method for calculating the correction of the short-circuit current of a photovoltaic cell due to the mismatch of the solar spectrum with the reference ASTM AM1.5G spectrum, for a specific site, throughout the year, using monthly data of AERONET (AErosol RObotic NETwork established by NASA and CNRS and the model SMARTS (simple model for atmospheric transmission of sunshine developed by the NREL. We applied this correction method on the site of Palaiseau (France, 48.7°N, 2.2°E, 156 m, close to our laboratory, just for comparison and the example of Blida (Algeria, 36°N, 2°E, 230 m is given for one year. This example illustrates the importance of this spectral correction to better estimate the photovoltaic yield. To be more precise, instead of modeling the solar spectral distribution, one can measure it with a spectro-radiometer, and then, derive the spectral mismatch correction. Some of our typical measurements are presented in this paper.

  1. Valuing Health Using Time Trade-Off and Discrete Choice Experiment Methods: Does Dimension Order Impact on Health State Values?

    Science.gov (United States)

    Mulhern, Brendan; Shah, Koonal; Janssen, Mathieu F Bas; Longworth, Louise; Ibbotson, Rachel

    2016-01-01

    Health states defined by multiattribute instruments such as the EuroQol five-dimensional questionnaire with five response levels (EQ-5D-5L) can be valued using time trade-off (TTO) or discrete choice experiment (DCE) methods. A key feature of the tasks is the order in which the health state dimensions are presented. Respondents may use various heuristics to complete the tasks, and therefore the order of the dimensions may impact on the importance assigned to particular states. To assess the impact of different EQ-5D-5L dimension orders on health state values. Preferences for EQ-5D-5L health states were elicited from a broadly representative sample of members of the UK general public. Respondents valued EQ-5D-5L health states using TTO and DCE methods across one of three dimension orderings via face-to-face computer-assisted personal interviews. Differences in mean values and the size of the health dimension coefficients across the arms were compared using difference testing and regression analyses. Descriptive analysis suggested some differences between the mean TTO health state values across the different dimension orderings, but these were not systematic. Regression analysis suggested that the magnitude of the dimension coefficients differs across the different dimension orderings (for both TTO and DCE), but there was no clear pattern. There is some evidence that the order in which the dimensions are presented impacts on the coefficients, which may impact on the health state values provided. The order of dimensions is a key consideration in the design of health state valuation studies. Copyright © 2016. Published by Elsevier Inc.

  2. Measurement of mass and isotopic fission yields for heavy fission products with the LOHENGRIN mass spectrometer

    International Nuclear Information System (INIS)

    Bail, A.

    2009-05-01

    In spite of the huge amount of fission yield data available in different libraries, more accurate values are still needed for nuclear energy applications and to improve our understanding of the fission process. Thus measurements of fission yields were performed at the mass spectrometer Lohengrin at the Institut Laue-Langevin in Grenoble, France. The mass separator Lohengrin is situated at the research reactor of the institute and permits the placement of an actinide layer in a high thermal neutron flux. It separates fragments according to their atomic mass, kinetic energy and ionic charge state by the action of magnetic and electric fields. Coupled to a high resolution ionization chamber the experiment was used to investigate the mass and isotopic yields of the light mass region. Almost all fission yields of isotopes from Th to Cf have been measured at Lohengrin with this method. To complete and improve the nuclear data libraries, these measurements have been extended in this work to the heavy mass region for the reactions 235 U(n th ,f), 239 Pu(n th ,f) and 241 Pu(n th ,f). For these higher masses an isotopic separation is no longer possible. So, a new method was undertaken with the reaction 239 Pu(n th ,f) to determine the isotopic yields by spectrometry. These experiments have allowed to reduce considerably the uncertainties. Moreover the ionic charge state and kinetic energy distributions were specifically studied and have shown, among others, nanosecond isomers for some masses. (author)

  3. Effect of Application of Pseudomonas fluorescent Strains on Yield and Yield Components of Rapeseed Cultivars

    Directory of Open Access Journals (Sweden)

    R Najafi

    2015-09-01

    Full Text Available Plant growth promoting rhizobacteria has been identified as an alternative to chemical fertilizer to enhance plant growth and yield directly and indirectly. Use of rhizosphere free living bacteria is one of the methods for crop production and leads to improvement of resources absorption. In order to study of yield, yield components and radiation use efficiency, under application of PGPR condition, an experiment was carried out in 2008 growing season at Agriculture and natural resources research station of Mashhad. The cultivars selected from three rapeseed species belong to Brassica napus, Brassica rapa and Brassica juncea (landrace, BP.18، Goldrush، Parkland، Hyola330، Hyola401. Experimental factorial design was randomized in complete block with three replications. Treatments included six varieties of Rapeseed and inoculations were four levels as non–inoculation, inoculation with P. fluorescens169, P. putida108 and use then together. Results showed that strains of fluorescent pseudomonas bacteria had greatest effects on yield and yield components cultivars. A significant difference in the number of pods per plant and 1000 seed weight observed. The cultivars were different in all treats except 1000 seed weight. Overall results indicated that application of growth stimulating bacteria in combination with different cultivars, had a positive effect growth, yield characteristics of plant varieties of rapeseed plants.

  4. The Heuristic Value of p in Inductive Statistical Inference

    Directory of Open Access Journals (Sweden)

    Joachim I. Krueger

    2017-06-01

    Full Text Available Many statistical methods yield the probability of the observed data – or data more extreme – under the assumption that a particular hypothesis is true. This probability is commonly known as ‘the’ p-value. (Null Hypothesis Significance Testing ([NH]ST is the most prominent of these methods. The p-value has been subjected to much speculation, analysis, and criticism. We explore how well the p-value predicts what researchers presumably seek: the probability of the hypothesis being true given the evidence, and the probability of reproducing significant results. We also explore the effect of sample size on inferential accuracy, bias, and error. In a series of simulation experiments, we find that the p-value performs quite well as a heuristic cue in inductive inference, although there are identifiable limits to its usefulness. We conclude that despite its general usefulness, the p-value cannot bear the full burden of inductive inference; it is but one of several heuristic cues available to the data analyst. Depending on the inferential challenge at hand, investigators may supplement their reports with effect size estimates, Bayes factors, or other suitable statistics, to communicate what they think the data say.

  5. The Heuristic Value of p in Inductive Statistical Inference.

    Science.gov (United States)

    Krueger, Joachim I; Heck, Patrick R

    2017-01-01

    Many statistical methods yield the probability of the observed data - or data more extreme - under the assumption that a particular hypothesis is true. This probability is commonly known as 'the' p -value. (Null Hypothesis) Significance Testing ([NH]ST) is the most prominent of these methods. The p -value has been subjected to much speculation, analysis, and criticism. We explore how well the p -value predicts what researchers presumably seek: the probability of the hypothesis being true given the evidence, and the probability of reproducing significant results. We also explore the effect of sample size on inferential accuracy, bias, and error. In a series of simulation experiments, we find that the p -value performs quite well as a heuristic cue in inductive inference, although there are identifiable limits to its usefulness. We conclude that despite its general usefulness, the p -value cannot bear the full burden of inductive inference; it is but one of several heuristic cues available to the data analyst. Depending on the inferential challenge at hand, investigators may supplement their reports with effect size estimates, Bayes factors, or other suitable statistics, to communicate what they think the data say.

  6. Effect of Different Sources of Nitrogen and Organic Fertilizers on Yield and Yield Components of Ajowan (Trachyspermum ammi L.

    Directory of Open Access Journals (Sweden)

    zahra saydi

    2017-09-01

    Full Text Available Introduction Ajowan (Trachyspermum ammi L. is an annual medicinal plant of the family Apiaceae which can reach 30 -100 cm in height. and its growth is highly depended on the availability of mineral nutrients in the soil. But, it has been shown that utilization of chemical fertilizers for growth promotion of Ajown could have negative impacts on environment and ecological systems. Nowadays, sustainable agriculture is the best approach to overcome such problems and prevent the excess accumulation of chemical fertilizers deposited within the soil. Application of bio-fertilizers as an alternative to chemical fertilizers is a new sustainable approach which have been raised in the new era of Agriculture. Therefore, this study was conducted to investigate the application of various source of biological fertilizers such as Vermicompost, Alkazotplus and Humic Acid in combination with nitrogen fertilizers on growth behavior, yield and yield components of Ajowan under Ahvaz growing condition. Materials and methods This research was conducted at the Agricultural Research Station of Shahid Chamran University in 2014-2015 to determine the effects of different sources of nitrogen and organic fertilizers on the yield and yield components of Ajowan based on two way randomized complete block design with three replications. The first factor of the experiment was Application of four different nitrogen sources including: Urea (U, Sulfur-coated Urea (SCU, %50 Sulfur-coated urea (1/2 SCU + Alkazot Plus biological fertilizer and Control (no nitrogen source used. Organic fertilizers were also applied at four levels, consisting of Humic Acid, Vermicompost, %50 Vermicompost + Humic Acid and Control (no organic Fertilizer as the second factor. After soil preparation, approximately four Kg.ha-1 of the seeds were planted on the rows with 30 cm distance. Plant height, number of sub branches, number of umbels per plant, number of seeds per umbel , 1000 seeds weight, biological

  7. ISOL yield predictions from holdup-time measurements

    International Nuclear Information System (INIS)

    Spejewski, Eugene H.; Carter, H Kennon; Mervin, Brenden T.; Prettyman, Emily S.; Kronenberg, Andreas; Stracener, Daniel W

    2008-01-01

    A formalism based on a simple model is derived to predict ISOL yields for all isotopes of a given element based on a holdup-time measurement of a single isotope of that element. Model predictions, based on parameters obtained from holdup-time measurements, are compared to independently-measured experimental values

  8. Meta-metallic coils and resonators: Methods for high Q-value resonant geometries

    Energy Technology Data Exchange (ETDEWEB)

    Mett, R. R. [Department of Biophysics, Medical College of Wisconsin, Milwaukee, Wisconsin 53226 (United States); Department of Physics and Chemistry, Milwaukee School of Engineering, Milwaukee, Wisconsin 53202 (United States); Sidabras, J. W.; Hyde, J. S. [Department of Biophysics, Medical College of Wisconsin, Milwaukee, Wisconsin 53226 (United States)

    2016-08-15

    A novel method of decreasing ohmic losses and increasing Q-value in metallic resonators at high frequencies is presented. The method overcomes the skin-depth limitation of rf current flow cross section. The method uses layers of conductive foil of thickness less than a skin depth and capacitive gaps between layers. The capacitive gaps can substantially equalize the rf current flowing in each layer, resulting in a total cross-sectional dimension for rf current flow many times larger than a skin depth. Analytic theory and finite-element simulations indicate that, for a variety of structures, the Q-value enhancement over a single thick conductor approaches the ratio of total conductor thickness to skin depth if the total number of layers is greater than one-third the square of the ratio of total conductor thickness to skin depth. The layer number requirement is due to counter-currents in each foil layer caused by the surrounding rf magnetic fields. We call structures that exhibit this type of Q-enhancement “meta-metallic.” In addition, end effects due to rf magnetic fields wrapping around the ends of the foils can substantially reduce the Q-value for some classes of structures. Foil structures with Q-values that are substantially influenced by such end effects are discussed as are five classes of structures that are not. We focus particularly on 400 MHz, which is the resonant frequency of protons at 9.4 T. Simulations at 400 MHz are shown with comparison to measurements on fabricated structures. The methods and geometries described here are general for magnetic resonance and can be used at frequencies much higher than 400 MHz.

  9. Effect of Coated Urea Fertilizer on Yield and Yield Components of Sweet Corn (KSC 403 under Deficit Irrigation

    Directory of Open Access Journals (Sweden)

    N Farid

    2017-11-01

    Full Text Available This study was carried out to assess the effect of coated urea fertilizer on yield and yield components of sweet corn (KSC 403 under different irrigation regimes, in Ramin Agriculture and Natural Sciences University, Iran by using strip split plot in a randomized complete block design with four replications. Three levels of deficit irrigation (100%, 80 and 60% of calculated water requirement of sweet corn were assigned as vertical factor and six sources of urea fertilizer (without urea, un-coated urea, sulfur-coated urea fertilizer, starch-coated urea, agar-coated urea and chitin-coated urea were assigned to horizontal factor. Effects of deficit water and source of fertilizer were statistically significant on plant height, 1000 kernel weight, ear diameter, and number of rows per ear, ear yield, biological yield and harvest index. Maximum of plant height (153.23 cm, 1000 kernel weight (104.51 g, grain yield (9853.3 kg/ha and biological yield (12471.6 kg/ha were obtained in chitin coated urea fertilizer. Maximum of ear diameter (4.67 cm and number of row per ear (13.22 were achieved in agar coated urea fertilizer and that of harvest index (45.79% was indicated by starch-coated urea. Maximum of length of ear, number of kernels per row and grain yield were 23.65cm, 25.83 and 7142 kg/ha, respectively, and were obtained with the using of chitin-coated urea fertilizer and 100% water requirement. Minimum values of these traits were 13.54 cm, 5.56 and 871 kg/ha, respectively, and were obtained by using of control (no urea application and 60% water requirement. Results showed that biopolymer coated urea is potent to improve some morphological characteristics and increase grain yield of sweet corn.

  10. Synthesis of Enterprise and Value-Based Methods for Multiattribute Risk Analysis

    International Nuclear Information System (INIS)

    Kenley, C. Robert; Collins, John W.; Beck, John M.; Heydt, Harold J.; Garcia, Chad B.

    2001-01-01

    This paper describes a method for performing multiattribute decision analysis to prioritize ap-proaches to handling risks during the development and operation of complex socio-technical systems. The method combines risk categorization based on enterprise views, risk prioritization of the categories based on the Analytic Hierarchy Process (AHP), and more standard probability-consequence ratings schemes. We also apply value-based testing me-thods used in software development to prioritize risk-handling approaches. We describe a tool that synthesizes the methods and performs a multiattribute analysis of the technical and pro-grammatic risks on the Next Generation Nuclear Plant (NGNP) enterprise.

  11. Crop yield response to water stress imposed at different growth stages

    International Nuclear Information System (INIS)

    Iqbal, M.; Mahmood Shah, M.; Wisal, M.

    1995-01-01

    Potato requires sufficient soil moisture and fertilization to produce high yields but the present water resoures are limited compared to the cultivable land, field experiments were conduced from 1991 to 1995 to study relationship between yield and crop water use as a function of water stress imposed at different growth stages. The irrigation treatments involved application of full and stress watering s selectively at four growth stages : Establishment , Flowering Tuber formation and ripening. In full watering, full water requirements of the crop were met, i.e., ET sub a = ET sub m whereas in stress watering about half the amount of full watering was applied, i.e., ET sub a < ET sub m. Changes in moisture content of the soil pre files after irrigation were monitored with the help of neutron moisture probe in order to compute ET sub a by the water balance method. The results obtained showed that the tuber yield was produced by full watering ( T 1) and the lowest by continuous stress watering (T 2). A plot of relative yield against relative evapotranspiration deficit revealed that ripening was the lest sensitive whereas early development followed by flowering the most sensitive growth stage to water stress. The crop water use efficiencies were generally higher in the treatments where a combination of normal and stress watering was applied compared to where all - normal watering s were applied. The traditional irrigation practice resulted in wasteful water application with relatively lower yields, hence the results from this project will have high value for the farming community to get this higher yields with scarce water resources. The studies with labelled fertilizer showed that planting and earthing - up were equally important growth stages of potato for applying fertilizer for its efficient utilization. 3 figs; 25 tabs; 12 refs (Author)

  12. Rate constant for the reaction SO + BrO yields SO2 + Br

    Science.gov (United States)

    Brunning, J.; Stief, L.

    1986-01-01

    The rate of the radical-radical reaction SO + BrO yields SO2 + Br has been determined at 298 K in a discharge flow system near 1 torr pressure with detection of SO and BrO via collision-free sampling mass spectrometry. The rate constant was determined using two different methods: measuring the decay of SO radicals in the presence of an excess of BrO and measuring the decay of BrO radicals in excess SO. The results from the two methods are in reasonable agreement and the simple mean of the two values gives the recommended rate constant at 298 K, k = (5.7 + or - 2.0) x 10 to the -11th cu cm/s. This represents the first determination of this rate constant and it is consistent with a previously derived lower limit based on SO2 formation. Comparison is made with other radical-radical reactions involving SO or BrO. The reaction SO + BrO yields SO2 + Br is of interest for models of the upper atmosphere of the earth and provides a potential coupling between atmospheric sulfur and bromine chemistry.

  13. TILLAGE EFFECTS ON SUNFLOWER (HELIANTHUS ANNUUS, L. EMERGENCE, YIELD, QUALITY, AND FUEL CONSUMPTION IN DOUBLE CROPPING SYSTEM

    Directory of Open Access Journals (Sweden)

    ABDULLAH SESSIZ

    2009-06-01

    Full Text Available The relation between crop growing and soil tillage treatment are play important role in agricultural production. Soils under conventional tillage (CT generally have lower bulk density and associated higher total porosity within the plough layer than under no tillage (NT. No-till farming can reduce soil erosion, conserve soil moisture and minimize labor and fuel consumption. The aim of this study were to investigate the effects of conventional, reduced and notillage methods on soil physical properties, sunfl ower yield and yield components, protein and oil content and fuel consumption in Southeastern of Turkey. Six tillage methods for the second crop sunfl ower were tested and compared each other within after lentil harvesting at 2003 and 2004 years in a clay loam soil. According to results, the fi rst year, the bulk density had decreased from 1.29 to 1.09 g cm-3, the second year the δb had decreased from 1.41 to 1.23 g cm-3. Differences between years and tillage methods in terms of yield were found signifi cant (p<0.05. However, no differences were found between the NT and CT. There were also no signifi cance differences in content of protein, oil and ash among six tillage methods. The highest fuel consumption was measured in conventional method (CT whereas the lowest value was found in direct seeding method as 33.48 L ha-1 and 6.6 L ha-1, respectively.

  14. Recombination yield of geminate radical pairs in low magnetic fields - A Green's function method

    International Nuclear Information System (INIS)

    Doktorov, A.B.; Hansen, M.J.; Pedersen, J. Boiden

    2006-01-01

    An analytic expression for the recombination yield of a geminate radical pair with a single spin one half nuclei is derived. The expression is valid for any field strength of the static magnetic field. It is assumed that the spin mixing is caused solely by the hyperfine interaction of the nuclear spin and the difference in Zeeman energies of the two radical partners, that the recombination occurs at the distance of closest approach, and that there is a locally strong dephasing at contact. This is a special result of a new general approach where a Green's function technique is used to recast the stochastic Liouville equation into a low dimensional matrix equation that is particularly convenient for locally strong dephasing systems. The equation is expressed in terms of special values (determined by the magnetic parameters) of the Green's function for the relative motion of the radicals and it is therefore valid for any motional model, e.g. diffusion, one and two site models. The applicability of the strong dephasing approximation is illustrated by comparison with numerical exact results

  15. Solvent and extraction methods effects on the quality of eel ( Anguilla bicolor ) oil

    International Nuclear Information System (INIS)

    Sasongko, H; Efendi, N R; Farida, Y; Amartiwi, T; Rahmawati, A A; Wicaksono, A; Budihardjo, A; Sugiyarto

    2017-01-01

    Eel ( Anguilla bicolor) is a general fish consumption in many countries, especially Japan, China, Germany, and France. Besides its vitamin rich, eel oil is also known to contain fatty acids that are necessary for pharmaceutical purposes and as food a supplement. This research was aimed to evaluate the quality of eel oil by different solvent and extraction methods. In this study, fresh eels were extracted using maceration and reflux methods.Chloroform was used as the solvent in the maceration while water used in the reflux method. The oil quality was examined based on the Official Methods of Analysis of the Association of Official Analytical Chemist (AOAC).The result showed that the yield of eel oil using maceration method was 5.44% ± 0.64 with a specific gravity of 0.915 g/mL, while reflux method obtained the yield of 5.33 % ± 0.84 and specific gravity of 0.8575 g/mL. The physicochemical parameters of oil quality used in this study were acid, peroxide, saponification, and iodine value. The maceration method obtained the acid value of 17.389 mgKOH/g, the peroxide value of 7.021meqO 2 /kg, the saponification value of 111.16mgKOH/g, and the iodine value of 65.14 WIJS. While the reflux method produced the acid value of 9.116 mgKOH/g, the peroxide value of 6.088 meqO 2 /kg, the saponification value of 70 mgKOH/g, and the iodine value of 87.74 WIJS. (paper)

  16. Effects of extraction methods on the yield, chemical structure and anti-tumor activity of polysaccharides from Cordyceps gunnii mycelia.

    Science.gov (United States)

    Zhu, Zhen-Yuan; Dong, Fengying; Liu, Xiaocui; Lv, Qian; YingYang; Liu, Fei; Chen, Ling; Wang, Tiantian; Wang, Zheng; Zhang, Yongmin

    2016-04-20

    This study was to investigate the effects of different extraction methods on the yield, chemical structure and antitumor activity of polysaccharides from Cordyceps gunnii (C. gunnii) mycelia. Five extraction methods were used to extract crude polysaccharides (CPS), which include room-temperature water extraction (RWE), hot-water extraction (HWE), microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE) and cellulase-assisted extraction (CAE). Then Sephadex G-100 was used for purification of CPS. As a result, the antitumor activities of CPS and PPS on S180 cells were evaluated. Five CPS and purified polysaccharides (PPS) were obtained. The yield of CPS by microwave-assisted extraction (CPSMAE) was the highest and its anti-tumor activity was the best and its macromolecular polysaccharide (3000-1000kDa) ratio was the largest. The PPS had the same monosaccharide composition, but their obvious difference was in the antitumor activity and the physicochemical characteristics, such as intrinsic viscosity, specific rotation, scanning electron microscopy and circular dichroism spectra. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Growth and yield of patchouli (Pogostemon cablin, Benth) due to mulching and method of fertilizer on rain-fed land

    Science.gov (United States)

    Nasruddin; Harahap, E. M.; Hanum, C.; Siregar, L. A. M.

    2018-02-01

    The drought stress that occurs during growth results in a drastic reduction in growth and yield. This study was aimed to study the effect of mulching and method of fertilizer application in reducing the impact of drought stress on patchouli plants. The experiment was conducted from July to December 2016 using a split plot design into three replications with two treatment factors. The first factor was mulch factor with three levels, i.e. M0 (without mulch), M1 (rice straw mulch) and M2 (silver black plastic mulch). The second factor was the method of fertilizer application consisting of three stages: C1 (once), C2 (twice), C3 (three times). The parameters included plant height, number of branches, number of leaves, root length, wet weight of plant, root canopy ratio, total of chlorophyll, soil temperature and soil moisture content. The results showed the use of straw mulch reduce the impact of drought stress on patchouli plants. Two times fertilizer application gave better growth and yield. The use of straw mulch produced lower temperature degrees and maintained soil moisture content.

  18. Critical Values for Lawshe's Content Validity Ratio: Revisiting the Original Methods of Calculation

    Science.gov (United States)

    Ayre, Colin; Scally, Andrew John

    2014-01-01

    The content validity ratio originally proposed by Lawshe is widely used to quantify content validity and yet methods used to calculate the original critical values were never reported. Methods for original calculation of critical values are suggested along with tables of exact binomial probabilities.

  19. Natural colorants: Pigment stability and extraction yield enhancement via utilization of appropriate pretreatment and extraction methods.

    Science.gov (United States)

    Ngamwonglumlert, Luxsika; Devahastin, Sakamon; Chiewchan, Naphaporn

    2017-10-13

    Natural colorants from plant-based materials have gained increasing popularity due to health consciousness of consumers. Among the many steps involved in the production of natural colorants, pigment extraction is one of the most important. Soxhlet extraction, maceration, and hydrodistillation are conventional methods that have been widely used in industry and laboratory for such a purpose. Recently, various non-conventional methods, such as supercritical fluid extraction, pressurized liquid extraction, microwave-assisted extraction, ultrasound-assisted extraction, pulsed-electric field extraction, and enzyme-assisted extraction have emerged as alternatives to conventional methods due to the advantages of the former in terms of smaller solvent consumption, shorter extraction time, and more environment-friendliness. Prior to the extraction step, pretreatment of plant materials to enhance the stability of natural pigments is another important step that must be carefully taken care of. In this paper, a comprehensive review of appropriate pretreatment and extraction methods for chlorophylls, carotenoids, betalains, and anthocyanins, which are major classes of plant pigments, is provided by using pigment stability and extraction yield as assessment criteria.

  20. Predicting Alkylate Yield and its Hydrocarbon Composition for Sulfuric Acid Catalyzed Isobutane Alkylation with Olefins Using the Method of Mathematical Modeling

    OpenAIRE

    Nurmakanova, А. Е.; Ivashkina, Elena Nikolaevna; Ivanchina, Emilia Dmitrievna; Dolganov, I. A.; Boychenko, S. S.

    2015-01-01

    The article provides the results of applied mathematical model of isobutane alkylation with olefins catalyzed by sulfuric acid to predict yield and hydrocarbon composition of alkylate caused by the changes in the feedstock composition and process parameters. It is shown that the alkylate produced from feedstock with less mass fraction of isobutane has lower octane value. Wherein the difference in composition of the feedstock contributes to antiknock index by the amount of 1.0-2.0 points.

  1. Application of Artificial Neural Networks in Canola Crop Yield Prediction

    Directory of Open Access Journals (Sweden)

    S. J. Sajadi

    2014-02-01

    Full Text Available Crop yield prediction has an important role in agricultural policies such as specification of the crop price. Crop yield prediction researches have been based on regression analysis. In this research canola yield was predicted using Artificial Neural Networks (ANN using 11 crop year climate data (1998-2009 in Gonbad-e-Kavoos region of Golestan province. ANN inputs were mean weekly rainfall, mean weekly temperature, mean weekly relative humidity and mean weekly sun shine hours and ANN output was canola yield (kg/ha. Multi-Layer Perceptron networks (MLP with Levenberg-Marquardt backpropagation learning algorithm was used for crop yield prediction and Root Mean Square Error (RMSE and square of the Correlation Coefficient (R2 criterions were used to evaluate the performance of the ANN. The obtained results show that the 13-20-1 network has the lowest RMSE equal to 101.235 and maximum value of R2 equal to 0.997 and is suitable for predicting canola yield with climate factors.

  2. An evolutionary yield function based on Barlat 2000 yield function for the superconducting niobium sheet

    Science.gov (United States)

    Darbandi, Payam; Pourboghrat, Farhang

    2011-08-01

    Superconducting radio frequency (SRF) niobium cavities are widely used in high-energy physics to accelerate particle beams in particle accelerators. The performance of SRF cavities is affected by the microstructure and purity of the niobium sheet, surface quality, geometry, etc. Following optimum strain paths in the forming of these cavities can significantly control these parameters. To select these strain paths, however, information about the mechanical behavior, microstructure, and formability of the niobium sheet is required. In this study the Barlat 2000 yield function has been used as a yield function for high purity niobium. Results from this study showed that, due to intrinsic behavior, it is necessary to evolve the anisotropic coefficients of Barlat's yield function in order to properly model the plastic behavior of the niobium sheet. The accuracy of the newly developed evolutionary yield function was verified by applying it to the modeling of the hydrostatic bulging of the niobium sheet. Also, in a separate attempt crystal plasticity finite element method was use to model the behavior of the polycrystalline niobium sheet with a particular initial texture.

  3. An evolutionary yield function based on Barlat 2000 yield function for the superconducting niobium sheet

    International Nuclear Information System (INIS)

    Darbandi, Payam; Pourboghrat, Farhang

    2011-01-01

    Superconducting radio frequency (SRF) niobium cavities are widely used in high-energy physics to accelerate particle beams in particle accelerators. The performance of SRF cavities is affected by the microstructure and purity of the niobium sheet, surface quality, geometry, etc. Following optimum strain paths in the forming of these cavities can significantly control these parameters. To select these strain paths, however, information about the mechanical behavior, microstructure, and formability of the niobium sheet is required. In this study the Barlat 2000 yield function has been used as a yield function for high purity niobium. Results from this study showed that, due to intrinsic behavior, it is necessary to evolve the anisotropic coefficients of Barlat's yield function in order to properly model the plastic behavior of the niobium sheet. The accuracy of the newly developed evolutionary yield function was verified by applying it to the modeling of the hydrostatic bulging of the niobium sheet. Also, in a separate attempt crystal plasticity finite element method was use to model the behavior of the polycrystalline niobium sheet with a particular initial texture.

  4. Study of the yield of the Fricke dosimetry for electron energies from 2 to 90 MeV

    International Nuclear Information System (INIS)

    Berkvens, I.P.

    1988-01-01

    The chemical yield for the ferrous sulphate dosimeters was determined for 60 Co-γ radiation and for electron beams of mean energies in the points of measurements, between 2.7 and about 9 MeV. As references, absolute determinations of absorbed dose based on calorimetric measurements, were used. The irradiation geometry for the ferrous sulphate dosimeter differ always due to technical reasons somewhat from that for the absorber of the calorimeter. The investigators took this difference into account. Perturbation correction factors that correct for the difference in electron scattering in the air gaps around the absorber of the calorimeter and in the graphite, were computed with the Monte Carlo method. Also the ''reference volume method'' recently introduced by the ICRU (report No.35), was applied to correct for the introduction of a ferrous sulphate dosimeter in a graphite phantom. This correction is necessary as the electrons are stopped and scattered in a different way in graphite and water. The results indicated that there is no energy dependence of the chemical yield (G-value) of the dosimeter in the energy range 2.7 to about 9 MeV. A mean G-value of 1,584 (± 0.006) μ mol/J was obtained. For 60 Co-γ a G-value of 1.601 μ mol/J was determined. However, this difference might not be real but due to the present uncertainty in the stopping-power ratios graphite to water. These ratios are thus made use of to determine the G-value from measurements of the absorbed dose to graphite. Previous investigations, by the group from Gent, indicated a small increase of the G-value with the electron energy. These more accurate determinations thus instead indicate a constant G-value. Refs, figs, tabs

  5. Temporal and Spatial Variation of Water Yield Modulus in the Yangtze River Basin in Recent 60 Years

    Science.gov (United States)

    Shi, Xiaoqing; Weng, Baisha; Qin, Tianling

    2018-01-01

    The Yangtze River Basin is the largest river basin of Asia and the third largest river basin of the world, the gross water resources amount ranks first in the river basins of the country, and it occupies an important position in the national water resources strategic layout. Under the influence of climate change and human activities, the water cycle has changed. The temporal and spatial distribution of precipitation in the basin is more uneven and the floods are frequent. In order to explore the water yield condition in the Yangtze River Basin, we selected the Water Yield Modulus (WYM) as the evaluation index, then analyzed the temporal and spatial evolution characteristics of the WYM in the Yangtze River Basin by using the climate tendency method and the M-K trend test method. The results showed that the average WYM of the Yangtze River Basin in 1956-2015 are between 103,600 and 1,262,900 m3/km2, with an average value of 562,300 m3/km2, which is greater than the national average value of 295,000 m3/km2. The minimum value appeared in the northwestern part of the Tongtian River district, the maximum value appeared in the northeastern of Dongting Lake district. The rate of change in 1956-2015 is between -0.68/a and 0.79/a, it showed a downward trend in the western part but not significantly, an upward trend in the eastern part reached a significance level of α=0.01. The minimum value appeared in the Tongtian River district, the largest value appeared in the Hangjia Lake district, and the average tendency rate is 0.04/a in the whole basin.

  6. An evaluation of the lamb vision system as a predictor of lamb carcass red meat yield percentage.

    Science.gov (United States)

    Brady, A S; Belk, K E; LeValley, S B; Dalsted, N L; Scanga, J A; Tatum, J D; Smith, G C

    2003-06-01

    An objective method for predicting red meat yield in lamb carcasses is needed to accurately assess true carcass value. This study was performed to evaluate the ability of the lamb vision system (LVS; Research Management Systems USA, Fort Collins, CO) to predict fabrication yields of lamb carcasses. Lamb carcasses (n = 246) were evaluated using LVS and hot carcass weight (HCW), as well as by USDA expert and on-line graders, before fabrication of carcass sides to either bone-in or boneless cuts. On-line whole number, expert whole-number, and expert nearest-tenth USDA yield grades and LVS + HCW estimates accounted for 53, 52, 58, and 60%, respectively, of the observed variability in boneless, saleable meat yields, and accounted for 56, 57, 62, and 62%, respectively, of the variation in bone-in, saleable meat yields. The LVS + HCW system predicted 77, 65, 70, and 87% of the variation in weights of boneless shoulders, racks, loins, and legs, respectively, and 85, 72, 75, and 86% of the variation in weights of bone-in shoulders, racks, loins, and legs, respectively. Addition of longissimus muscle area (REA), adjusted fat thickness (AFT), or both REA and AFT to LVS + HCW models resulted in improved prediction of boneless saleable meat yields by 5, 3, and 5 percentage points, respectively. Bone-in, saleable meat yield estimations were improved in predictive accuracy by 7.7, 6.6, and 10.1 percentage points, and in precision, when REA alone, AFT alone, or both REA and AFT, respectively, were added to the LVS + HCW output models. Use of LVS + HCW to predict boneless red meat yields of lamb carcasses was more accurate than use of current on-line whole-number, expert whole-number, or expert nearest-tenth USDA yield grades. Thus, LVS + HCW output, when used alone or in combination with AFT and/or REA, improved on-line estimation of boneless cut yields from lamb carcasses. The ability of LVS + HCW to predict yields of wholesale cuts suggests that LVS could be used as an objective

  7. A Non-parametric Method for Calculating Conditional Stressed Value at Risk

    Directory of Open Access Journals (Sweden)

    Kohei Marumo

    2017-01-01

    Full Text Available We consider the Value at Risk (VaR of a portfolio under stressed conditions. In practice, the stressed VaR (sVaR is commonly calculated using the data set that includes the stressed period. It tells us how much the risk amount increases if we use the stressed data set. In this paper, we consider the VaR under stress scenarios. Technically, this can be done by deriving the distribution of profit or loss conditioned on the value of risk factors. We use two methods; the one that uses the linear model and the one that uses the Hermite expansion discussed by Marumo and Wolff (2013, 2016. Numerical examples shows that the method using the Hermite expansion is capable of capturing the non-linear effects such as correlation collapse and volatility clustering, which are often observed in the markets.

  8. Optimizing rice yields while minimizing yield-scaled global warming potential.

    Science.gov (United States)

    Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

    2014-05-01

    To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

  9. A study of the planned value estimation method for developing earned value management system in the nuclear power plant construction project

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.H.; Moon, B.S., E-mail: gustblast@khnp.co.kr, E-mail: moonbs@khnp.co.kr [Korea Hydro & Nuclear power co.,Ltd., Central Research Inst., Daejeon (Korea, Republic of); Lee, J.H., E-mail: ljh@kkprotech.com [Kong Kwan Protech Co.,Ltd., Seoul (Korea, Republic of)

    2014-07-01

    The Earned Value Management System (EVMS) is a project management technique for measuring project performance and progress, and then forward projection through the integrated management and control of cost and schedule. This research reviewed the concept of the EVMS method, and proposes two Planned Value estimation methods for the potential application to succeeding NPP construction projects by using the historical data from the proceeding NPP projects. This paper is to introduce the solution for the problems caused by the absence of relevant management system incorporating schedule and cost, which has arisen as repeated issues in NPP construction project management. (author)

  10. A study of the planned value estimation method for developing earned value management system in the nuclear power plant construction project

    International Nuclear Information System (INIS)

    Lee, S.H.; Moon, B.S.; Lee, J.H.

    2014-01-01

    The Earned Value Management System (EVMS) is a project management technique for measuring project performance and progress, and then forward projection through the integrated management and control of cost and schedule. This research reviewed the concept of the EVMS method, and proposes two Planned Value estimation methods for the potential application to succeeding NPP construction projects by using the historical data from the proceeding NPP projects. This paper is to introduce the solution for the problems caused by the absence of relevant management system incorporating schedule and cost, which has arisen as repeated issues in NPP construction project management. (author)

  11. Calculated apparent yields of rare gas fission products

    International Nuclear Information System (INIS)

    Delucchi, A.A.

    1975-01-01

    The apparent fission yield of the rare gas fission products from four mass chains is calculated as a function of separation time for six different fissioning systems. A plot of the calculated fission yield along with a one standard deviation error band is given for each rare gas fission product and for each fissioning system. Those parameters in the calculation that were major contributors to the calculated standard deviation at each separation time were identified and the results presented on a separate plot. To extend the usefulness of these calculations as new and better values for the input parameters become available, a third plot was generated for each system which shows how sensitive the derived fission yield is to a change in any given parameter used in the calculation. (U.S.)

  12. Combining ability studies on yield related traits in wheat under normal and water stress conditions

    International Nuclear Information System (INIS)

    Saeed, A.; Khan, A.S.; Khaliq, I.

    2010-01-01

    Six diverse wheat cultivars/lines viz; Baviacore, Nesser, 9247, 9252, 9258 and 9267 were crossed in a complete diallel fashion to develop 30 F1 crosses, which were tested along with their parents under normal and water stress conditions. Numerical analysis was made for spike density, number of grains per spike, 100-grain weight, biological yield, grain yield and harvest index. Significant differences among genotypic mean were observed in all of the traits under both conditions. GCA and SCA differences were significant for all the traits under study except spike density and 100-grain weight in both conditions. Wheat variety Nesser showed maximum general combining ability value for spike density under water stress conditions and maximum GCA value for biological yield and grain yield under irrigated condition. The variety Baviacore proved best general combiner for number of grains per spike and harvest index under both conditions while biological yield and grain yield under water stress condition. Variety 9252 found best general combiner for 100-grain weight under both condition. The cross 9252 x Nesser showed maximum specific combining ability value for spike density and biological yield under irrigated while for 100-grain weight under water stress condition. 9258 x 9252 exhibited maximum SCA for number of grains per spike under irrigated while 9258 x Nesser under water stress condition. 9267 x Nesser showed maximum SCA for 100-grain weight under irrigated condition while spike density under water stress condition. 9258 x 9247 was proved best combiner for grain yield and harvest index irrigated while 9267 x 9258 for biological yield, grain yield and harvest index under water stress condition. (author)

  13. Statistical Analysis of Large Simulated Yield Datasets for Studying Climate Effects

    Science.gov (United States)

    Makowski, David; Asseng, Senthold; Ewert, Frank; Bassu, Simona; Durand, Jean-Louis; Martre, Pierre; Adam, Myriam; Aggarwal, Pramod K.; Angulo, Carlos; Baron, Chritian; hide

    2015-01-01

    Many studies have been carried out during the last decade to study the effect of climate change on crop yields and other key crop characteristics. In these studies, one or several crop models were used to simulate crop growth and development for different climate scenarios that correspond to different projections of atmospheric CO2 concentration, temperature, and rainfall changes (Semenov et al., 1996; Tubiello and Ewert, 2002; White et al., 2011). The Agricultural Model Intercomparison and Improvement Project (AgMIP; Rosenzweig et al., 2013) builds on these studies with the goal of using an ensemble of multiple crop models in order to assess effects of climate change scenarios for several crops in contrasting environments. These studies generate large datasets, including thousands of simulated crop yield data. They include series of yield values obtained by combining several crop models with different climate scenarios that are defined by several climatic variables (temperature, CO2, rainfall, etc.). Such datasets potentially provide useful information on the possible effects of different climate change scenarios on crop yields. However, it is sometimes difficult to analyze these datasets and to summarize them in a useful way due to their structural complexity; simulated yield data can differ among contrasting climate scenarios, sites, and crop models. Another issue is that it is not straightforward to extrapolate the results obtained for the scenarios to alternative climate change scenarios not initially included in the simulation protocols. Additional dynamic crop model simulations for new climate change scenarios are an option but this approach is costly, especially when a large number of crop models are used to generate the simulated data, as in AgMIP. Statistical models have been used to analyze responses of measured yield data to climate variables in past studies (Lobell et al., 2011), but the use of a statistical model to analyze yields simulated by complex

  14. Pair copula constructions to determine the dependence structure of Treasury bond yields

    Directory of Open Access Journals (Sweden)

    Marcelo Brutti Righi

    2015-12-01

    Full Text Available We estimated the dependence structure of US Treasury bonds through a pair copula construction. As a result, we verified that the variability of the yields decreases with a longer time of maturity of the bond. The yields presented strong dependence with past values, strongly positive bivariate associations between the daily variations, and prevalence of the Student's t copula in the relationships between the bonds. Furthermore, in tail associations, we identified relevant values in most of the relationships, which highlights the importance of risk management in the context of bonds diversification.

  15. Improved Steganographic Method Preserving Pixel-Value Differencing Histogram with Modulus Function

    Directory of Open Access Journals (Sweden)

    Lee Hae-Yeoun

    2010-01-01

    Full Text Available Abstract We herein advance a secure steganographic algorithm that uses a turnover policy and a novel adjusting process. Although the method of Wang et al. uses Pixel-Value Differencing (PVD and their modulus function provides high capacity and good image quality, the embedding process causes a number of artifacts, such as abnormal increases and fluctuations in the PVD histogram, which may reveal the existence of the hidden message. In order to enhance the security of the algorithm, a turnover policy is used that prevents abnormal increases in the histogram values and a novel adjusting process is devised to remove the fluctuations at the border of the subrange in the PVD histogram. The proposed method therefore eliminates all the weaknesses of the PVD steganographic methods thus far proposed and guarantees secure communication. In the experiments described herein, the proposed algorithm is compared with other PVD steganographic algorithms by using well-known steganalysis techniques, such as RS-analysis, steganalysis for LSB matching, and histogram-based attacks. The results support our contention that the proposed method enhances security by keeping the PVD histogram similar to the cover, while also providing high embedding capacity and good imperceptibility to the naked eye.

  16. Impact of organic and inorganic fertilizers on growth, fruit yield ...

    African Journals Online (AJOL)

    Fruit yield obtained with Ogbomoso local was 45 and 56% higher than what was obtained for Roma VF and Califonia wonder, respectively. In terms of vitamin C content, Roma VF fertilized with 50% NPK + 50% TC gave the highest value which is 23 to 67% higher than values obtained from the other treatment combinations.

  17. Variational Homotopy Perturbation Method for Solving Higher Dimensional Initial Boundary Value Problems

    Directory of Open Access Journals (Sweden)

    Muhammad Aslam Noor

    2008-01-01

    Full Text Available We suggest and analyze a technique by combining the variational iteration method and the homotopy perturbation method. This method is called the variational homotopy perturbation method (VHPM. We use this method for solving higher dimensional initial boundary value problems with variable coefficients. The developed algorithm is quite efficient and is practically well suited for use in these problems. The proposed scheme finds the solution without any discritization, transformation, or restrictive assumptions and avoids the round-off errors. Several examples are given to check the reliability and efficiency of the proposed technique.

  18. Economic Value of Agroecosystem Services within Wheat Fields in Khorasan Razavi Province

    Directory of Open Access Journals (Sweden)

    a Koocheki

    2017-08-01

    questionnaires collected from 40 fields varying in area, management and inputs level. Using these data economic value of feed and food, carbon sequestration, oxygen production, biodiversity, water retention and tourism together with greenhouse gas emission and nitrogen and phosphorous leakage as environmental externalities was quantified. Calculations were based on standard methods described by Millennium Ecosystem Assessment. Economic values were estimated as international dollar as proposed by De Groot et al. (2012 and reported as equivalent national price. Results and discussion The mean value of the total agroecosystem services of wheat fields excluding externalities, were estimated as 66.85×106 Rls.ha-1.y-1. The value of non-marketable services was 3.46 times more than food and feed and on average atmospheric services (oxygen production and carbon sequestration contributed up to 62% of total value while biodiversity and provisional services included 9.3 and 21% of total, respectively and the other services below 5%. Net value of services was increased with increasing field size. However, doubling field size resulted in 50% increase in net value because larger fields were more intensified leading to higher negative impacts. Economic value of services was significantly dependent on wheat total dry matter and yield. Nonlinear relation was found between wheat yield and total value of services where a break point was found at yields above 4 t.ha-1. However, negative externalities were increased linearly with increasing both total dry matter and grain yield. Conclusion Results of this study indicated that despite to intensive management wheat production systems of Khorasan province are able to provide several regulating and supporting services and their economic value is 3-4 folds higher than provisional services harvested as grain and feed. However, negative externalities will be increased in more intensified fields with higher yield. Feeding a growing human population is

  19. Wheat yield dynamics: a structural econometric analysis.

    Science.gov (United States)

    Sahin, Afsin; Akdi, Yilmaz; Arslan, Fahrettin

    2007-10-15

    In this study we initially have tried to explore the wheat situation in Turkey, which has a small-open economy and in the member countries of European Union (EU). We have observed that increasing the wheat yield is fundamental to obtain comparative advantage among countries by depressing domestic prices. Also the changing structure of supporting schemes in Turkey makes it necessary to increase its wheat yield level. For this purpose, we have used available data to determine the dynamics of wheat yield by Ordinary Least Square Regression methods. In order to find out whether there is a linear relationship among these series we have checked each series whether they are integrated at the same order or not. Consequently, we have pointed out that fertilizer usage and precipitation level are substantial inputs for producing high wheat yield. Furthermore, in respect for our model, fertilizer usage affects wheat yield more than precipitation level.

  20. Assessment of sediment yield using RS and GIS at two sub-basins of Dez Watershed, Iran

    Directory of Open Access Journals (Sweden)

    Hamed Noori

    2016-09-01

    Full Text Available Soil erosion is a serious threat to soil and water resources in semi-arid regions. Modified Pacific South-west Inter Agency Committee (MPSIAC and Erosion Potential Method (EPM, as two well-known models, have shown their performance in many case studies. The goal of present study is to assess the efficiency of these methods for estimating the sediments yield and erosion intensity within short-term and long-term timeframes over two sub-basins of Dez watershed, west of Iran. The results showed that the study area can be categorized into slight, moderate, high and very high erosion zones. Almost half of the study area is highly susceptible to erosion due to the geological formations and land cover. Moreover, the long-term (i.e. 30 years sediment yield of 387 and 615 (kton y−1 estimated by MPSIAC and EPM models demonstrated the superiority of EPM. Compared to the measured value of 612 (kton y−1, the performance of EPM was astonishing. By splitting the dataset into six periods of five years, the sediment yield was predicted in short-term periods by both aforementioned methods. Such segmentation provides the opportunity to evaluate the impact of extreme flooding events on the models performances. The results showed that both models failed in estimation of sediment load during flood conditions. Nevertheless, the correlation coefficients for estimating the sediment yield were found to be R=0.93 and R=0.85 for EPM and MPSIAC models respectively, for short-term simulations.

  1. Characteristic Value Method of Well Test Analysis for Horizontal Gas Well

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Li

    2014-01-01

    Full Text Available This paper presents a study of characteristic value method of well test analysis for horizontal gas well. Owing to the complicated seepage flow mechanism in horizontal gas well and the difficulty in the analysis of transient pressure test data, this paper establishes the mathematical models of well test analysis for horizontal gas well with different inner and outer boundary conditions. On the basis of obtaining the solutions of the mathematical models, several type curves are plotted with Stehfest inversion algorithm. For gas reservoir with closed outer boundary in vertical direction and infinite outer boundary in horizontal direction, while considering the effect of wellbore storage and skin effect, the pseudopressure behavior of the horizontal gas well can manifest four characteristic periods: pure wellbore storage period, early vertical radial flow period, early linear flow period, and late horizontal pseudoradial flow period. For gas reservoir with closed outer boundary both in vertical and horizontal directions, the pseudopressure behavior of the horizontal gas well adds the pseudosteady state flow period which appears after the boundary response. For gas reservoir with closed outer boundary in vertical direction and constant pressure outer boundary in horizontal direction, the pseudopressure behavior of the horizontal gas well adds the steady state flow period which appears after the boundary response. According to the characteristic lines which are manifested by pseudopressure derivative curve of each flow period, formulas are developed to obtain horizontal permeability, vertical permeability, skin factor, reservoir pressure, and pore volume of the gas reservoir, and thus the characteristic value method of well test analysis for horizontal gas well is established. Finally, the example study verifies that the new method is reliable. Characteristic value method of well test analysis for horizontal gas well makes the well test analysis

  2. Estimating the responses of winter wheat yields to moisture variations in the past 35 years in Jiangsu Province of China.

    Science.gov (United States)

    Xu, Xiangying; Gao, Ping; Zhu, Xinkai; Guo, Wenshan; Ding, Jinfeng; Li, Chunyan

    2018-01-01

    Jiangsu is an important agricultural province in China. Winter wheat, as the second major grain crop in the province, is greatly affected by moisture variations. The objective of this study was to investigate whether there were significant trends in changes in the moisture conditions during wheat growing seasons over the past decades and how the wheat yields responded to different moisture levels by means of a popular drought index, the Standardized Precipitation Evapotranspiration Index (SPEI). The study started with a trend analysis and quantification of the moisture conditions with the Mann-Kendall test and Sen's Slope method, respectively. Then, correlation analysis was carried out to determine the relationship between de-trended wheat yields and multi-scalar SPEI. Finally, a multivariate panel regression model was established to reveal the quantitative yield responses to moisture variations. The results showed that the moisture conditions in Jiangsu were generally at a normal level, but this century appeared slightly drier in because of the relatively high temperatures. There was a significant correlation between short time scale SPEI values and wheat yields. Among the three critical stages of wheat development, the SPEI values in the late growth stage (April-June) had a closer linkage to the yields than in the seedling stage (October-November) and the over-wintering stage (December-February). Moreover, the yield responses displayed an asymmetric characteristic, namely, moisture excess led to higher yield losses compared to moisture deficit in this region. The maximum yield increment could be obtained under the moisture level of slight drought according to the 3-month SPEI at the late growth stage, while extreme wetting resulted in the most severe yield losses. The moisture conditions in the first 15 years of the 21st century were more favorable than in the last 20 years of the 20th century for wheat production in Jiangsu.

  3. Estimating the responses of winter wheat yields to moisture variations in the past 35 years in Jiangsu Province of China.

    Directory of Open Access Journals (Sweden)

    Xiangying Xu

    Full Text Available Jiangsu is an important agricultural province in China. Winter wheat, as the second major grain crop in the province, is greatly affected by moisture variations. The objective of this study was to investigate whether there were significant trends in changes in the moisture conditions during wheat growing seasons over the past decades and how the wheat yields responded to different moisture levels by means of a popular drought index, the Standardized Precipitation Evapotranspiration Index (SPEI. The study started with a trend analysis and quantification of the moisture conditions with the Mann-Kendall test and Sen's Slope method, respectively. Then, correlation analysis was carried out to determine the relationship between de-trended wheat yields and multi-scalar SPEI. Finally, a multivariate panel regression model was established to reveal the quantitative yield responses to moisture variations. The results showed that the moisture conditions in Jiangsu were generally at a normal level, but this century appeared slightly drier in because of the relatively high temperatures. There was a significant correlation between short time scale SPEI values and wheat yields. Among the three critical stages of wheat development, the SPEI values in the late growth stage (April-June had a closer linkage to the yields than in the seedling stage (October-November and the over-wintering stage (December-February. Moreover, the yield responses displayed an asymmetric characteristic, namely, moisture excess led to higher yield losses compared to moisture deficit in this region. The maximum yield increment could be obtained under the moisture level of slight drought according to the 3-month SPEI at the late growth stage, while extreme wetting resulted in the most severe yield losses. The moisture conditions in the first 15 years of the 21st century were more favorable than in the last 20 years of the 20th century for wheat production in Jiangsu.

  4. Balance sheet method assessment for nitrogen fertilization in bread wheat: I. yield and quality

    Directory of Open Access Journals (Sweden)

    Maria Corbellini

    2006-09-01

    Full Text Available In the European Union the production of high quality wheat is mainly located in the Mediterranean regions where the climatic conditions positively affect protein concentration in the grain. High quality wheat calls for proper management of nitrogen fertilization, thus there is a need to verify whether the limitations imposed by local governments on maximum rate of nitrogen fertilization admitted may affect bread making quality. Trials were conducted in fourteen environments (E to study the effects of different nitrogen fertilizations on eight cultivars (C, belonging to four quality grades (Q. Nitrogen (N was applied to crops according to three rates/modalities: N1 corresponding to the maximum rate admitted calculated according to a balance sheet method and distributed at the stage of spike initiation; N2 with 50 kg ha-1 of nitrogen more than N1, also distributed at the stage of spike initiation; N3 with 50 kg ha-1 of nitrogen more than N1 but distributed at the stage of flag leaf appearance. The effects of environment, nitrogen and cultivar were significant for grain yield, test weight, 1000 kernel weight, heading time, plant height and for quality traits (protein content and alveograph indices. The existence of variability among cultivars and quality grades in the response to rate and timing of nitrogen fertilization was demonstrated by the significance of NxC and NxQ interactions. Dry matter and nitrogen contents of plant at anthesis and at harvest were significantly affected by the main sources of variation. High quality cultivars yielded more grain of better quality with higher N rates (N2 and N3 as compared to the maximum rate of nitrogen admitted by the local government (N1. These results demonstrated that the adopted balance sheet method for the calculation of N requirements of wheat crop adversely affects the full potential expression of the cultivars belonging to superior bread making quality grades.

  5. Balance sheet method assessment for nitrogen fertilization in bread wheat: I. yield and quality

    Directory of Open Access Journals (Sweden)

    Mario Monotti

    2011-02-01

    Full Text Available In the European Union the production of high quality wheat is mainly located in the Mediterranean regions where the climatic conditions positively affect protein concentration in the grain. High quality wheat calls for proper management of nitrogen fertilization, thus there is a need to verify whether the limitations imposed by local governments on maximum rate of nitrogen fertilization admitted may affect bread making quality. Trials were conducted in fourteen environments (E to study the effects of different nitrogen fertilizations on eight cultivars (C, belonging to four quality grades (Q. Nitrogen (N was applied to crops according to three rates/modalities: N1 corresponding to the maximum rate admitted calculated according to a balance sheet method and distributed at the stage of spike initiation; N2 with 50 kg ha-1 of nitrogen more than N1, also distributed at the stage of spike initiation; N3 with 50 kg ha-1 of nitrogen more than N1 but distributed at the stage of flag leaf appearance. The effects of environment, nitrogen and cultivar were significant for grain yield, test weight, 1000 kernel weight, heading time, plant height and for quality traits (protein content and alveograph indices. The existence of variability among cultivars and quality grades in the response to rate and timing of nitrogen fertilization was demonstrated by the significance of NxC and NxQ interactions. Dry matter and nitrogen contents of plant at anthesis and at harvest were significantly affected by the main sources of variation. High quality cultivars yielded more grain of better quality with higher N rates (N2 and N3 as compared to the maximum rate of nitrogen admitted by the local government (N1. These results demonstrated that the adopted balance sheet method for the calculation of N requirements of wheat crop adversely affects the full potential expression of the cultivars belonging to superior bread making quality grades.

  6. YIELD STABILITY OF NEW HYBRID RICE ACROSS LOCATIONS

    Directory of Open Access Journals (Sweden)

    Satoto

    2016-02-01

    Full Text Available The adaptation of hybrid rice varieties mostly are in specific location and season, but there are some of the varieties have a wide adaptation then adopted by the farmer in the large area. Replicated yield trials were conducted to study the stability of hybrid rice yield and identify the best location to optimize their yield per ha. The trials were conducted in three location such as Sukamandi, Salatiga and Malang during two seasons in 2011. Data across location and season were analazed by using AMMI and Eberhart Russel methods. The AMMI analysis showed that the IR79156A/PK88 was adaptable to favorable environments but unstable. This hybrid is always performing well and produce the higher yield compare to check variety. Some of other hybrids were good only in specific location, i.e. IR62829A/BP2280-1E-12-22 and IR58029A/BP2280-1E-12-22. Those hybrids produced higher yield in Salatiga and Malang, respectively. Seem to AMMI analysis, the result of Eberhart and Russell method also showed that IR79156A/PK81 was the best hybrid with regression slope (b around 1 with the yield average higher than average of all hybrids. It indicated that this hybrid has a wide adaptation and probably can be cultivated in the wider ecosystem.

  7. Production yield analysis in the poultry processing industry

    NARCIS (Netherlands)

    Somsen, D.J.; Capelle, A.; Tramper, J.

    2004-01-01

    The paper outlines a case study where the PYA-method (production yield analysis) was implemented at a poultry-slaughtering line, processing 9000 broiler chicks per hour. It was shown that the average live weight of a flock of broilers could be used to predict the maximum production yield of the

  8. Comparison of calculated and experimental values of the yields of xenon isotopes in reactions with high-energy protons

    International Nuclear Information System (INIS)

    Shukolyukov, A.Yu.; Katargin, N.V.; Baishev, I.S.

    1989-01-01

    Calculations of the cumulative yields of isotopes of Xe have been carried out on the basis of the semi-empirical formula of Silverberg and Tsao for Ba- and Dy-targets and bombarding proton energies in the range 100-1050 MeV. Results are compared with experimental data for the yields of Xe isotopes, and domains of applicability of the semi-empirical formula are determined

  9. Effect of Integrated Nutrient Management on Yield and Yield ...

    African Journals Online (AJOL)

    Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...

  10. Interaction Between Phosphorus and Zinc on the Biomass Yield and Yield Attributes of the Medicinal Plant Stevia (Stevia rebaudiana)

    Science.gov (United States)

    Das, Kuntal; Dang, Raman; Shivananda, T. N.; Sur, Pintu

    2005-01-01

    A greenhouse experiment was conducted at the Indian Institute of Horticultural Research (IIHR), Bangalore to study the interaction effect between phosphorus (P) and zinc (Zn) on the yield and yield attributes of the medicinal plant stevia. The results show that the yield and yield attributes have been found to be significantly affected by different treatments. The total yield in terms of biomass production has been increased significantly with the application of Zn and P in different combinations and methods, being highest (23.34 g fresh biomass) in the treatment where Zn was applied as both soil (10 kg ZnSO4/ha) and foliar spray (0.2% ZnSO4). The results also envisaged that the different yield attributes viz. height, total number of branches, and number of leaves per plant have been found to be varied with treatments, being highest in the treatment where Zn was applied as both soil and foliar spray without the application of P. The results further indicated that the yield and yield attributes of stevia have been found to be decreased in the treatment where Zn was applied as both soil and foliar spray along with P suggesting an antagonistic effect between Zn and P. PMID:15915292

  11. Interaction Between Phosphorus and Zinc on the Biomass Yield and Yield Attributes of the Medicinal Plant Stevia (Stevia rebaudiana

    Directory of Open Access Journals (Sweden)

    Kuntal Das

    2005-01-01

    Full Text Available A greenhouse experiment was conducted at the Indian Institute of Horticultural Research (IIHR, Bangalore to study the interaction effect between phosphorus (P and zinc (Zn on the yield and yield attributes of the medicinal plant stevia. The results show that the yield and yield attributes have been found to be significantly affected by different treatments. The total yield in terms of biomass production has been increased significantly with the application of Zn and P in different combinations and methods, being highest (23.34 g fresh biomass in the treatment where Zn was applied as both soil (10 kg ZnSO4/ha and foliar spray (0.2% ZnSO4. The results also envisaged that the different yield attributes viz. height, total number of branches, and number of leaves per plant have been found to be varied with treatments, being highest in the treatment where Zn was applied as both soil and foliar spray without the application of P. The results further indicated that the yield and yield attributes of stevia have been found to be decreased in the treatment where Zn was applied as both soil and foliar spray along with P suggesting an antagonistic effect between Zn and P.

  12. Prediction of winter wheat high yield from remote sensing based model: application in United States and Ukraine

    Science.gov (United States)

    Franch, B.; Vermote, E.; Roger, J. C.; Skakun, S.; Becker-Reshef, I.; Justice, C. O.

    2017-12-01

    Accurate and timely crop yield forecasts are critical for making informed agricultural policies and investments, as well as increasing market efficiency and stability. In Becker-Reshef et al. (2010) and Franch et al. (2015) we developed an empirical generalized model for forecasting winter wheat yield. It is based on the relationship between the Normalized Difference Vegetation Index (NDVI) at the peak of the growing season and the Growing Degree Day (GDD) information extracted from NCEP/NCAR reanalysis data. These methods were applied to MODIS CMG data in Ukraine, the US and China with errors around 10%. However, the NDVI is saturated for yield values higher than 4 MT/ha. As a consequence, the model had to be re-calibrated in each country and the validation of the national yields showed low correlation coefficients. In this study we present a new model based on the extrapolation of the pure wheat signal (100% of wheat within the pixel) from MODIS data at 1km resolution and using the Difference Vegetation Index (DVI). The model has been applied to monitor the national yield of winter wheat in the United States and Ukraine from 2001 to 2016.

  13. Effect of feed-related farm characteristics on relative values of genetic traits in dairy cows to reduce greenhouse gas emissions along the chain.

    Science.gov (United States)

    Van Middelaar, C E; Berentsen, P B M; Dijkstra, J; Van Arendonk, J A M; De Boer, I J M

    2015-07-01

    Breeding has the potential to reduce greenhouse gas (GHG) emissions from dairy farming. Evaluating the effect of a 1-unit change (i.e., 1 genetic standard deviation improvement) in genetic traits on GHG emissions along the chain provides insight into the relative importance of genetic traits to reduce GHG emissions. Relative GHG values of genetic traits, however, might depend on feed-related farm characteristics. The objective of this study was to evaluate the effect of feed-related farm characteristics on GHG values by comparing the values of milk yield and longevity for an efficient farm and a less efficient farm. The less efficient farm did not apply precision feeding and had lower feed production per hectare than the efficient farm. Greenhouse gas values of milk yield and longevity were calculated by using a whole-farm model and 2 different optimization methods. Method 1 optimized farm management before and after a change in genetic trait by maximizing labor income; the effect on GHG emissions (i.e., from production of farm inputs up to the farm gate) was considered a side effect. Method 2 optimized farm management after a change in genetic trait by minimizing GHG emissions per kilogram of milk while maintaining labor income and milk production at least at the level before the change in trait; the effect on labor income was considered a side effect. Based on maximizing labor income (method 1), GHG values of milk yield and longevity were, respectively, 279 and 143kg of CO2 equivalents (CO2e)/unit change per cow per year on the less efficient farm, and 247 and 210kg of CO2e/unit change per cow per year on the efficient farm. Based on minimizing GHG emissions (method 2), GHG values of milk yield and longevity were, respectively, 538 and 563kg of CO2e/unit change per cow per year on the less efficient farm, and 453 and 441kg of CO2e/unit change per cow per year on the efficient farm. Sensitivity analysis showed that, for both methods, the absolute effect of a

  14. Heritability studies of yield and yield associated traits in bread wheat

    International Nuclear Information System (INIS)

    Laghari, K.A.; Sial, M.A.; Arain, M.A.; Mirbahar, A.A.; Pirzada, A.; Mancrio, S.M.; Dahot, M.U.

    2010-01-01

    Heritability studies provide valid information about the traits that are transmitted from parents to offspring and also to the successive generations. Such studies help plant breeders to predict a successful cross with high heritability transmission to the progeny and thus are useful in the incorporation of characters into the offspring. Heritability study was conducted in F5 segregating generation of a cross between HT5 (female) and HT 37 (male) of bread wheat. The genetic parameters calculated were genetic variance (Vg,), environmental variance (Ve) and heritability percentage in broad sense (h2%), genetic advance (GA) and heritability coefficient (H). The highest heritability was observed for spike length (79.3%), number of grains per spike (54.5%) and main spike yield (69.5%) associated with high genetic advance (2.8, 22.8 and 1.5 respectively). Moderate to high heritability were recorded for peduncle length (48.75%) and number of grains per spikelet (47.2%) which associated with high genetic advance (2.3 and 0.68 respectively). However awn length and plant height had shown acceptable heritability values. The present finding suggests that most of the yield associated traits have been successfully transmitted. The information generated will be helpful for better understanding and selection of suitable, desirable material especially in advance generations. (author)

  15. A Novel Energy Yields Calculation Method for Irregular Wind Farm Layout

    DEFF Research Database (Denmark)

    Hou, Peng; Hu, Weihao; Soltani, Mohsen

    2015-01-01

    Due to the increasing size of offshore wind farm, the impact of the wake effect on energy yields become more and more evident. The Seafloor topography would limit the layout of the wind farm so that irregular layout is usually adopted inlarge scale offshore wind farm. However, the calculation...

  16. AUTUMNAL FORAGE YIELD AND NUTRITIVE VALUE OF THE LEGUME ARACHIS RENDIMENTO E VALOR NUTRITIVO DA FORRAGEM OUTONAL DE AMENDOIM-FORRAGEIRO

    Directory of Open Access Journals (Sweden)

    Pedro Lima Monks

    2007-09-01

    Full Text Available

    Dry matter yield and nutritive value of forage le-gume Arachis    pintoi (Krap. & Greg. cv. Alqueire-1 (BRA 037036, was evaluated under different cutting mana-gement regimes and levels of P and K fertilization, in a yellow-red argisoil, at CAP-UFPEL, Capão do Leão, RS, Brazil during Spring-Summer and Fall. Cutting regimes compared were: no cutting, one, two, three, four and five cuttings, at 5 cm above ground. Fertilization levels con-sisted in supplying zero, 50 and 100% of requirements for P and K recommended by Brazilian Soil Science Society, for warm season perennial forage legumes. Fertilization treatments were alocated to main plots and cutting regi-mes to subplots, in a complete splitplot randomized block design, with three replications. Data of the following va-riables were submitted to analysis of variance and polino-mial regression: dry matter yield and quality of autumnal cutting, dry matter accumulation rate of autumnal cutting and total dry matter yield. If the purpose is the utilization of the forage during Autumn, 70% of the recommended phosphorus and potassium fertilization is sufficient to ob-tain maximum forage yield. However, if the objective are cuttings during the growing season (Spring-Summer and also in Autumn, it is necessary 100% of the recommended fertilization. The increase in number of cuttings during Spring-Summer decreases in the same proportion the fo-rage yield in Autumn. Forage nutritive value in Autumn is better when greater number of cuttings are made during Spring-Summer. Spring deferments also result in higher autumnal forage quality.

    KEY-WORDS: Cutting, fertilization, tropical forage.

    Num Argissolo vermelho amarelo eutrófico típi-co, do Centro Agropecuário da Palma, da UFPEL, Capão do Leão, RS,  foram avaliados os efeitos de cortes esti-vais e da adubação fosfatada e potássica sobre o rendi-mento e valor nutritivo da matéria seca (MS outonal de amendoim-forrageiro (Arachis

  17. Determination of fission gas yields from isotope ratios

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg

    1983-01-01

    This paper describes a method of calculating the actual fission yield of Kr and Xe in nuclear fuel including the effect of neutron capture reactions and decay. The bases for this calculation are the cumulative yields (ref. 1) of Kr and Xe isotopes (or pairs of isotopes) which are unaffected...... by neutron capture reactions, and measured Kr and Xe isotope ratios. Also the burnup contribution from the different fissile heavy isotopes must be known in order to get accurate fission gas yields....

  18. Influence of excitonic effects on luminescence quantum yield in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Sachenko, A.V.; Kostylyov, V.P.; Vlasiuk, V.M. [V. Lashkaryov Institute of Semiconductor Physics, NAS of Ukraine, 41 prospect Nauky, 03028 Kyiv (Ukraine); Sokolovskyi, I.O., E-mail: isokolovskyi@mun.ca [V. Lashkaryov Institute of Semiconductor Physics, NAS of Ukraine, 41 prospect Nauky, 03028 Kyiv (Ukraine); Department of Physics and Physical Oceanography, Memorial University of Newfoundland, St. John' s, NL, A1B 3X7 Canada (Canada); Evstigneev, M. [Department of Physics and Physical Oceanography, Memorial University of Newfoundland, St. John' s, NL, A1B 3X7 Canada (Canada)

    2017-03-15

    Nonradiative exciton lifetime in silicon is determined by comparison of the experimental and theoretical curves of bulk minority charge carriers lifetime on doping and excitation levels. This value is used to analyze the influence of excitonic effects on internal luminescence quantum yield at room temperature, taking into account both nonradiative and radiative exciton lifetimes. A range of Shockley-Hall-Reed lifetimes is found, where excitonic effects lead to an increase of internal luminescence quantum yield.

  19. Face compression yield strength of the copper-Inconel composite specimen

    International Nuclear Information System (INIS)

    Horie, T.

    1987-05-01

    A new equation for the face compression yield strength of copper-Inconel composite material has been derived. Elastic-plastic finite element analyses were also made for composite specimens with various aspect ratios to examine the edge effect of the specimen. According to the results of both the new equation and the analyses, the face compression yield strength of the composite should be decreased by about 25% from the value obtained with Becker's equation

  20. Study of pp{yields}pp{eta} reaction at threshold; Etude de la reaction pp{yields}pp{eta} au seuil

    Energy Technology Data Exchange (ETDEWEB)

    Taleb, A

    1994-11-01

    The {eta} production has been studied through the pp {yields} pp{eta} reaction at threshold. Data were taken at the Synchrotron of the ``Laboratoire National Saturne``. The detection in coincidence of the two protons scattered near 0 deg and analysed with the magnetic spectrometer SPES3 allows the reconstruction of missing mass spectra for the {eta} signature. A simulation program which takes into account all the experimental set up characteristics has been realized and tested through the pp {yields} d{pi}{sup +} reaction detected simultaneously with pp {yields} pp{eta}. The generated proton momentum spectra for pp {yields} pp{eta} show a pronounced {eta} mass dependence. This characteristic, connected to the kinematical properties of pp {yields} pp{eta} at threshold, is used to extract the mass of the meson {eta}. The obtained value, m{sub {eta}} = 547.65 {+-} 0.18 MeV, is in good agreement with measurement done recently through the pd {yields} {sup H}e{eta} reaction. The total cross section {sigma}{sub t} of pp {yields} pp{eta} measured at 1260, 1265 and 1300 MeV presents a strong energy dependence. This cross section increases less with energy than the phase-space. The influence of p-p and {eta}-p final state interactions in our measurements is studied. Our results are compared with theoretical predictions and assess the dominant character of the baryonic resonance N{sup *}(1535) in the {eta} mechanism production at threshold. These experimental results give an energy dependence which is not well reproduced by the theoretical predictions. This discrepancy could be an incorrect description of the {eta}-p interaction in the models. (author). 48 refs., 60 figs., 15 tabs.

  1. Updated stomatal flux and flux-effect models for wheat for quantifying effects of ozone on grain yield, grain mass and protein yield.

    Science.gov (United States)

    Grünhage, Ludger; Pleijel, Håkan; Mills, Gina; Bender, Jürgen; Danielsson, Helena; Lehmann, Yvonne; Castell, Jean-Francois; Bethenod, Olivier

    2012-06-01

    Field measurements and open-top chamber experiments using nine current European winter wheat cultivars provided a data set that was used to revise and improve the parameterisation of a stomatal conductance model for wheat, including a revised value for maximum stomatal conductance and new functions for phenology and soil moisture. For the calculation of stomatal conductance for ozone a diffusivity ratio between O(3) and H(2)O in air of 0.663 was applied, based on a critical review of the literature. By applying the improved parameterisation for stomatal conductance, new flux-effect relationships for grain yield, grain mass and protein yield were developed for use in ozone risk assessments including effects on food security. An example of application of the flux model at the local scale in Germany shows that negative effects of ozone on wheat grain yield were likely each year and on protein yield in most years since the mid 1980s. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Logarithmic Similarity Measure between Interval-Valued Fuzzy Sets and Its Fault Diagnosis Method

    Directory of Open Access Journals (Sweden)

    Zhikang Lu

    2018-02-01

    Full Text Available Fault diagnosis is an important task for the normal operation and maintenance of equipment. In many real situations, the diagnosis data cannot provide deterministic values and are usually imprecise or uncertain. Thus, interval-valued fuzzy sets (IVFSs are very suitable for expressing imprecise or uncertain fault information in real problems. However, existing literature scarcely deals with fault diagnosis problems, such as gasoline engines and steam turbines with IVFSs. However, the similarity measure is one of the important tools in fault diagnoses. Therefore, this paper proposes a new similarity measure of IVFSs based on logarithmic function and its fault diagnosis method for the first time. By the logarithmic similarity measure between the fault knowledge and some diagnosis-testing samples with interval-valued fuzzy information and its relation indices, we can determine the fault type and ranking order of faults corresponding to the relation indices. Then, the misfire fault diagnosis of the gasoline engine and the vibrational fault diagnosis of a turbine are presented to demonstrate the simplicity and effectiveness of the proposed diagnosis method. The fault diagnosis results of gasoline engine and steam turbine show that the proposed diagnosis method not only gives the main fault types of the gasoline engine and steam turbine but also provides useful information for multi-fault analyses and predicting future fault trends. Hence, the logarithmic similarity measure and its fault diagnosis method are main contributions in this study and they provide a useful new way for the fault diagnosis with interval-valued fuzzy information.

  3. Improving yield of PZT piezoelectric devices on glass substrates

    Science.gov (United States)

    Johnson-Wilke, Raegan L.; Wilke, Rudeger H. T.; Cotroneo, Vincenzo; Davis, William N.; Reid, Paul B.; Schwartz, Daniel A.; Trolier-McKinstry, Susan

    2012-10-01

    The proposed SMART-X telescope includes adaptive optics systems that use piezoelectric lead zirconate titanate (PZT) films deposited on flexible glass substrates. Several processing constraints are imposed by current designs: the crystallization temperature must be kept below 550 °C, the total stress in the film must be minimized, and the yield on 1 cm2 actuator elements should be work, RF magnetron sputtering was used to deposit films since chemical solution deposition (CSD) led to warping of large area flexible glass substrates. A PZT 52/48 film that wasdeposited at 4 mTorr and annealed at 550 °C for 24 hours showed no detectable levels of either PbO or pyrochlore second phases. Large area electrodes (1cm x 1 cm) were deposited on 4" glass substrates. Initially, the yield of the devices was low, however, two methods were employed to increase the yield to near 100 %. The first method included a more rigorous cleaning to improve the continuity of the Pt bottom electrode. The second method was to apply 3 V DC across the capacitor structure to burn out regions of defective PZT. The result of this latter method essentially removed conducting filaments in the PZT but left the bulk of the material undamaged. By combining these two methods, the yield on the large area electrodes improved from < 10% to nearly 100%.

  4. Yield trends and yield gap analysis of major crops in the world

    OpenAIRE

    Hengsdijk, H.; Langeveld, J.W.A.

    2009-01-01

    This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are quantified, yield gaps evaluated by crop experts, current yield progress by breeding estimated, and different yield projections compared. Results show decreasing yield growth for wheat and rice, but ...

  5. MISSE 2 PEACE Polymers Experiment Atomic Oxygen Erosion Yield Error Analysis

    Science.gov (United States)

    McCarthy, Catherine E.; Banks, Bruce A.; deGroh, Kim, K.

    2010-01-01

    Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. To address this, 40 different polymer samples and a sample of pyrolytic graphite, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the International Space Station (ISS) for nearly 4 years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2). The purpose of the PEACE Polymers experiment was to obtain accurate mass loss measurements in space to combine with ground measurements in order to accurately calculate the atomic oxygen erosion yields of a wide variety of polymeric materials exposed to the LEO space environment for a long period of time. Error calculations were performed in order to determine the accuracy of the mass measurements and therefore of the erosion yield values. The standard deviation, or error, of each factor was incorporated into the fractional uncertainty of the erosion yield for each of three different situations, depending on the post-flight weighing procedure. The resulting error calculations showed the erosion yield values to be very accurate, with an average error of 3.30 percent.

  6. Measurement of branching ratios and CP asymmetries for the decays B{sup 0}{yields}{pi}{sup +}{pi}{sup -}, B{sup 0}{yields}K{sup +}{pi}{sup -}, B{sup 0}{yields}K{sup +}K{sup -}

    Energy Technology Data Exchange (ETDEWEB)

    Prothmann, Kolja Andreas

    2013-01-30

    We present measurements of the branching fractions and CP violation parameters for the decay channels B{sup 0}{yields}{pi}{sup +}{pi}{sup -}, B{sup 0}{yields}K{sup +}{pi}{sup -} and B{sup 0}{yields}K{sup +}K{sup -}. The final Belle dataset of 772 million B anti B pairs produced at the {Upsilon}(4S) resonance at the KEKB asymmetric-energy e{sup +}e{sup -} collider is used. For the branching fractions, we obtain B(B{sup 0}{yields}{pi}{sup +}{pi}{sup -})=(5.63{+-} 0.16(stat){+-} 0.16(syst)) x 10{sup -6}, B(B{sup 0}{yields}K{sup {+-}}{pi}{sup -+})=(18.71{+-}0.25(stat){+-} 0.37(syst)) x 10{sup -6}, B(B{sup 0}{yields}K{sup +}K{sup -})<14 x 10{sup -8} at 90% CL. For the CP-asymmetries, we obtain following values: A{sub CP}(B{sup 0}{yields}{pi}{sup +}{pi}{sup -})=0.33{+-}0.06(stat){+-}0.03 (syst), S{sub CP}(B{sup 0}{yields}{pi}{sup +}{pi}{sup -})=-0.64{+-}0.08(stat){+-}0.03(syst), A{sub CP}(B{sup 0}{yields}K{sup {+-}}K{sup -+})=-0.061{+-}0.014(stat){+-}0.008 (syst), where A{sub CP} and S{sub CP} represent direct and mixing-induced CP violation, respectively. For the CP-violating weak phase {phi}{sub 2} we exclude the region 23.8 <{phi}{sub 2}<66.8 at the 1{sigma} level. A model independent test of new physics using a sum rule in the K{pi} system yields a mild deviation from the standard model of -0.289{+-}0.139(stat){+-}0.064(syst) with a 1.9{sigma} significance.

  7. Equity yields

    NARCIS (Netherlands)

    Vrugt, E.; van Binsbergen, J.H.; Koijen, R.S.J.; Hueskes, W.

    2013-01-01

    We study a new data set of dividend futures with maturities up to ten years across three world regions: the US, Europe, and Japan. We use these asset prices to construct equity yields, analogous to bond yields. We decompose the equity yields to obtain a term structure of expected dividend growth

  8. Measurement of K{sup {+-}}{yields}{pi}{sup {+-}}{gamma}{gamma} decays

    Energy Technology Data Exchange (ETDEWEB)

    Morales Morales, Cristina

    2009-07-21

    The goal of this thesis was an experimental test of an effective theory of strong interactions at low energy, called Chiral Perturbation Theory (ChPT). Weak decays of kaon mesons provide such a test. In particular, K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} decays are interesting because there is no tree-level O(p{sup 2}) contribution in ChPT, and the leading contributions start at O(p{sup 4}). At this order, these decays include one undetermined coupling constant, c. Both the branching ratio and the spectrum shape of K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} decays are sensitive to this parameter. O(p{sup 6}) contributions to K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} ChPT predict a 30-40% increase in the branching ratio. From the measurement of the branching ratio and spectrum shape of K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} decays, it is possible to determine a model dependent value of c and also to examine whether the O(p{sup 6}) corrections are necessary and enough to explain the rate. About 40% of the data collected in the year 2003 by the NA48/2 experiment have been analyzed and 908 K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} candidates with about 8% background contamination have been selected in the region with z=m{sup 2}{sub {gamma}}{sub {gamma}}/m{sub K}{sup 2}{>=}0.2. Using 5,750,121 selected K{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup 0} decays as normalization channel, a model independent differential branching ratio of K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma} has been measured to be: BR(K{sup {+-}} {yields} {pi}{sup {+-}}{gamma}{gamma}, z{>=}0.2)=(1.018{+-}0.038{sub stat}{+-}0.039{sub syst}{+-}0.004{sub ext}).10{sup -6}. From the fit to the O(p{sup 6}) ChPT prediction of the measured branching ratio and the shape of the z-spectrum, a value of c=1.54{+-}0.15{sub stat}{+-}0.18{sub syst} has been extracted. Using the measured c value and the O(p{sup 6}) ChPT prediction, the branching ratio for z=m{sup 2}{sub

  9. Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials

    Science.gov (United States)

    Dæhli, Lars Edvard Bryhni; Morin, David; Børvik, Tore; Hopperstad, Odd Sture

    2017-10-01

    Numerical unit cell models of an approximative representative volume element for a porous ductile solid are utilized to investigate differences in the mechanical response between a quadratic and a non-quadratic matrix yield surface. A Hershey equivalent stress measure with two distinct values of the yield surface exponent is employed as the matrix description. Results from the unit cell calculations are further used to calibrate a heuristic extension of the Gurson model which incorporates effects of the third deviatoric stress invariant. An assessment of the porous plasticity model reveals its ability to describe the unit cell response to some extent, however underestimating the effect of the Lode parameter for the lower triaxiality ratios imposed in this study when compared to unit cell simulations. Ductile failure predictions by means of finite element simulations using a unit cell model that resembles an imperfection band are then conducted to examine how the non-quadratic matrix yield surface influences the failure strain as compared to the quadratic matrix yield surface. Further, strain localization predictions based on bifurcation analyses and imperfection band analyses are undertaken using the calibrated porous plasticity model. These simulations are then compared to the unit cell calculations in order to elucidate the differences between the various modelling strategies. The current study reveals that strain localization analyses using an imperfection band model and a spatially discretized unit cell are in reasonable agreement, while the bifurcation analyses predict higher strain levels at localization. Imperfection band analyses are finally used to calculate failure loci for the quadratic and the non-quadratic matrix yield surface under a wide range of loading conditions. The underlying matrix yield surface is demonstrated to have a pronounced influence on the onset of strain localization.

  10. Analysis of two precipitation methods on the yield, structural features and activity of sulfated polysaccharides from Gracilaria cornea (Rhodophyta

    Directory of Open Access Journals (Sweden)

    Ricardo Basto Souza

    2015-03-01

    Full Text Available The global demand for natural products from seaweeds has increased worldwide; however, no description of the use of isoamly alcohol (IAA for obtaining of sulfated polysaccharides (SPs has been reported. We investigated the efficiency of two precipitation methods (M in obtaining SPs from the red seaweed Gracilaria cornea. SPs enzymatically isolated were concentrated with cetylpyridinium chloride (M I or IAA (M II and extracts were examined with regard to their yield, structural features and in vitro effects on the activated partial thromboplastin time (APTT using normal human plasma and standard heparin (193 IU mg-1. Yield difference reached 12.99%. Quantitative determination of sulfate was similar between the two methods (̴ 26%, but extracts revealed different pattern on charge density by agarose gel electrophoresis. Whereas both extracts revealed as agarocolloids, alternative M II was also efficient for lipids, proteins and nucleic acids according to the infrared analysis. Extracts had virtually no effect on APPT (1.95 and 2 IU mg-1 for M I and M II, respectively. The results revealed IAA as an alternative solvent for obtaining SPs from the red seaweed G. cornea, depending on the industry’ usage criterion.

  11. Nitrogen fixation in Leucaena leucocephala and effects of pruning s on cereal yields

    International Nuclear Information System (INIS)

    Bekunda, M.

    1998-01-01

    Leucaena leucocephala was interplanted with reference tree species, Cassia siamea and Cassia spectabilis, and estimates of percent N derived from N 2 fixation (%Ndfa) were made, by the isotope-dilution method, at 4, 6, 14, 20 and 30 months after transplanting. The %Ndfa values were low and variable throughout the growth period, except after thinning at 14 months when there was a five-fold increase. The two non-fixing reference species outperformed the N 2 -fixing Leucaena in above-ground vegetative production, and provided different fixed-N estimates. Prunings from the L. leucocephala and C. Siamea trees were applied separately to soil as green manure. Maize was planted to test the effects of the Leucaena green manure on soil fertility, and millet was the test crop for the Cassia. Whether surface-applied or incorporated, the prunings significantly improved yields, which were generally similar among rates and methods of application. The proportions of cereal N obtained from prunings ranged from 8 to 33%, with no cereal-yield correlation. The data indicate that multipurpose tree prunings are of potential use to farmers as organic sources of nutrients, even at relatively low application rates, without need for incorporation into the soil. (author)

  12. Use of abrupt strain path change for determining subsequent yield surface

    DEFF Research Database (Denmark)

    Kuroda, Mitsutoshi; Tvergaard, Viggo

    1999-01-01

    is prescribed, which makes the stress point move quickly along the yield surface. It is assumed that a closed-loop testing machine is used for the experiment, so that the strain path can be prescribed according to strain gauge measurements. Relative to the standard method of determining yield surface shapes...... by probing in many different stress directions from the elastic region, using some chosen plastic strain offset, the main advantage of the proposed method is that elastic unloading is not needed prior to tracing the yield surface. The method is illustrated here by a few analyses, first for the simplest how...

  13. The Effect of Different Zinc Application Methods on Yield and Grain Zinc Concentration of Bread Wheat Varieties

    Directory of Open Access Journals (Sweden)

    Hatun Barut

    2017-08-01

    Full Text Available This study was carried out to elucidate the impacts of zinc (Zn treatments on growth, development, quality and yield of commonly sown bread wheat cultivars under field conditions of Çukurova Region. Three different bread wheat cultivars (Adana-99, Ceyhan-99 and Pandas were experimented in randomized complete blocks-split plots experimental design with 3 replications. Field experiments were performed by two different Zn application methods; via soil and via soil+foliage. In the both trials, 0, 5, 10, 20, 30, and 40 kg ha-1 pure Zn doses were applied to the soil. 0.4% ZnSO4.7H2O solution was used for foliar Zn applications. Current findings revealed that Zn treatments had significant effects on grain yield, grain Zn concentration, grain phosphorus (P concentration and thousand grain weight of bread wheat cultivars, but significant effects were not observed on grain protein concentrations. Soil+foliar Zn treatments were more effective in improving grain Zn concentrations. It was concluded that 10- 20 kg ha-1 Zn treatment was quite effective on grain Zn concentrations.

  14. A Jacobi-Davidson type method for the generalized singular value problem

    NARCIS (Netherlands)

    Hochstenbach, M.E.

    2009-01-01

    We discuss a new method for the iterative computation of some of the generalized singular values and vectors of a large sparse matrix. Our starting point is the augmented matrix formulation of the GSVD. The subspace expansion is performed by (approximately) solving a Jacobi–Davidson type correction

  15. Gamma rays role in the improvement of yield and early maturity in soybean

    Energy Technology Data Exchange (ETDEWEB)

    Moualla, M Y; Ali, N M [Atomic Energy Commission, P.O.Box 6091, Damascus (Syrian Arab Republic)

    1995-10-01

    Seeds from soybean variety glycine max (L) Merr., were irradiated with three doses of gamma rays: 100, 150 and 200 Gray in order to obtain high yielding and early maturity mutants to grown after wheat in a two crop rotation. All the three doses induced morphological and physiological variation and malformation that increased with increasing the dose. Coefficient of variation values were higher in M2 than in their respective values of M3. The results showed no selection efficiency under the non optimal environmental growing conditions with this lack of efficiency being more evident for yield than for early maturity. Using FTAB statistical programme 20 M2 and M3 plant were selected for each character and when evaluated in the following generation, it was clear that selection efficiency was higher for early maturity than for yield; the latter being high yielding and 4 early maturing m 4 mutants were obtained. 3 tabs.

  16. Gamma rays role in the improvement of yield and early maturity in soybean

    International Nuclear Information System (INIS)

    Moualla, M.Y.; Ali, N.M.

    1995-01-01

    Seeds from soybean variety glycine max (L) Merr., were irradiated with three doses of gamma rays: 100, 150 and 200 Gray in order to obtain high yielding and early maturity mutants to grown after wheat in a two crop rotation. All the three doses induced morphological and physiological variation and malformation that increased with increasing the dose. Coefficient of variation values were higher in M2 than in their respective values of M3. The results showed no selection efficiency under the non optimal environmental growing conditions with this lack of efficiency being more evident for yield than for early maturity. Using FTAB statistical programme 20 M2 and M3 plant were selected for each character and when evaluated in the following generation, it was clear that selection efficiency was higher for early maturity than for yield; the latter being high yielding and 4 early maturing m 4 mutants were obtained. 3 tabs

  17. Can a combination of the conformal thin-sandwich and puncture methods yield binary black hole solutions in quasiequilibrium?

    International Nuclear Information System (INIS)

    Hannam, Mark D.; Evans, Charles R.; Cook, Gregory B.; Baumgarte, Thomas W.

    2003-01-01

    We consider combining two important methods for constructing quasiequilibrium initial data for binary black holes: the conformal thin-sandwich formalism and the puncture method. The former seeks to enforce stationarity in the conformal three-metric and the latter attempts to avoid internal boundaries, like minimal surfaces or apparent horizons. We show that these two methods make partially conflicting requirements on the boundary conditions that determine the time slices. In particular, it does not seem possible to construct slices that are quasistationary and that avoid physical singularities while simultaneously are connected by an everywhere positive lapse function, a condition which must be obtained if internal boundaries are to be avoided. Some relaxation of these conflicting requirements may yield a soluble system, but some of the advantages that were sought in combining these approaches will be lost

  18. The Effects of Different Nitrogen Sources on Yield and Yield Components of Sweet Corn (Zea mays L. saccharata

    Directory of Open Access Journals (Sweden)

    ali mojab ghasroddashti

    2017-09-01

    Full Text Available Introduction Sweet corn (Zea mays L. saccharata is one of the tropical cereals of graminae which is cultivated in order to use for ear. Nitrogen is one of the most important nutrients and key factors to achieve desirable yield. Fertilizers play a major role in crop productivity. However, nowadays, excessive use of fertilizers have been found to have a negative impact on yield and environment. Introducing new management methods based on nitrogen and water use efficiency showed some improvements in the quality and quantity of crop production in association with the health of the community. In fact, soil organic matter content should be maintained in the appropriate level to improve fertility. Using municipal solid waste compost and poultry manure are appropriate solutions. They can increase soil organic matter, modify physicochemical properties and improve crop production. Moreover, they are able to solve problems caused by the accumulation of municipal solid waste compost and poultry manure. Material and Methods In order to investigate the impact of different sources of nitrogen on yield and yield components of sweet corn, a field experiment was conducted as a randomized complete block design with three replications in Marvdasht in 2013. Treatments included different resources of fertilizer: 200 kg.ha-1 net nitrogen (T1, 300 kg.ha-1 net nitrogen (T2, 8 ton.ha-1 poultry manure (T3, 24 ton.ha-1 municipal solid waste compost (T4, 150 kg net nitrogen + 2 ton municipal solid waste compost (T5, 100 kg net nitrogen + 4 ton poultry manure (T6, 150 kg net nitrogen + 6 ton municipal solid waste compost (T7, 100 kg.ha-1 net nitrogen + 12 ton municipal solid waste compost (T8 and fertilizer free (control (T9. At the time of crop maturity, two square meters from middle of each plot were harvested to measure yield and yield components. Statistical analysis was performed using the SAS statistical software. Least significant difference (LSD test at the five

  19. Numerical solution of sixth-order boundary-value problems using Legendre wavelet collocation method

    Science.gov (United States)

    Sohaib, Muhammad; Haq, Sirajul; Mukhtar, Safyan; Khan, Imad

    2018-03-01

    An efficient method is proposed to approximate sixth order boundary value problems. The proposed method is based on Legendre wavelet in which Legendre polynomial is used. The mechanism of the method is to use collocation points that converts the differential equation into a system of algebraic equations. For validation two test problems are discussed. The results obtained from proposed method are quite accurate, also close to exact solution, and other different methods. The proposed method is computationally more effective and leads to more accurate results as compared to other methods from literature.

  20. Yields of fission products produced by thermal-neutron fission of 229Th

    International Nuclear Information System (INIS)

    Dickens, J.K.; McConnell, J.W.

    1983-01-01

    Absolute yields have been determined for 47 gamma rays emitted in the decay of 37 fission products representing 25 mass chains created during thermal-neutron fission of 229 Th. Using a Ge(Li) detector, spectra were obtained of gamma rays emitted between 15 min and 0.4 yr after very short irradiations by thermal neutrons of a 15-μg sample of 229 Th. On the basis of measured gamma-ray yields and known nuclear data, yields for cumulative production of 37 fission products were deduced. The absolute overall normalization uncertainty is 235 U, we postulate a simple functional dependence sigma = sigma(Z/sub p/), and using this dependence obtain values of Z/sub p/(A) for 15 mass chains created during fission of 229 Th. Values of Z/sub p/(A) were estimated for other mass chains based upon results of a recent study of Z/sub p/(A). Charge distributions determined using the deduced mass distribution and the deduced sets of Z/sub p/(A) and sigma(Z/sub p/) are in very good agreement with recent measurements, exhibiting a pronounced even-odd effect in elemental yields. These results may be used to predict unmeasured yields for 229 Th fission

  1. Investigation of Tolerance, Yield and Yield Components of Wheat Cultivars to Salinity of Irrigation Water at Sensitive Stages of Growth

    Directory of Open Access Journals (Sweden)

    B Saadatian

    2013-04-01

    Full Text Available This research in order to study of tolerance ability of wheat cultivates yield and yield components to salinity of irrigation water at sensitive stages of growth, was carried out as a factorial based on a randomized complete block design with 3 replications at greenhouse of Agricultural Faculty of Bu-Ali Sina University, in 2009. Treatments were included wheat cultivars of Alvand, Tous, Sayson and Navid and salinity of irrigation water induced by sodium chloride at five levels of 0, 4, 8, 12 and 16 dS m-1. The results showed that percentage and rate of emergence, plant height, 1000-grain weight, number of seed per spike, number of spike per pot, biological and grain yield reduced by increasing salinity level. At all stress levels Navid cv. had highest emergence percentage. In non-stress and 4 dS m-1, Alvand cv. and at higher levels of stress, Tous cv. had high height in reproductive phase. At control and 4 dS m-1, Sayson cv. and at 8, 12 and 16 dS m-1, Tous cv. in majority of yield and yield components traits had significant superior than other cultivars. Tolerance index of Sayson cv. at 4 and 8 dS m-1 was more than other cultivars but at 12 and 16 dS m-1, maximum value of this index was belonged to Tous cv. At all salinity levels, Alvand cv. had least tolerance index to stress. Number of spike per pot had maximum direct effect on grain yield of wheat cultivars in stress condition. Also indirect effect of biological yield via number of spike per pot than other its indirect effects, had maximum share in wheat seed yield.

  2. High yield fabrication of fluorescent nanodiamonds

    International Nuclear Information System (INIS)

    Boudou, Jean-Paul; Curmi, Patrick A; Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Aubert, Pascal; Sennour, Mohamed; Thorel, Alain; Gaffet, Eric

    2009-01-01

    A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

  3. High yield fabrication of fluorescent nanodiamonds

    Energy Technology Data Exchange (ETDEWEB)

    Boudou, Jean-Paul; Curmi, Patrick A [Structure and Activity of Normal and Pathological Biomolecules-INSERM/UEVE U829, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf [3.Physikalisches Institut, University of Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Aubert, Pascal [Nanometric Media Laboratory, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Sennour, Mohamed; Thorel, Alain [Centre des Materiaux, Mines Paris, ParisTech, BP 87, F-91000 Evry (France); Gaffet, Eric [Nanomaterials Research Group-UMR 5060, CNRS, UTBM, Site de Sevenans, F-90010 Belfort (France)], E-mail: jpb.cnrs@free.fr, E-mail: pcurmi@univ-evry.fr, E-mail: f.jelezko@physik.uni-stuttgart.de

    2009-06-10

    A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

  4. Effect of Planting Methods and Seeding Rates on Yield of Alfalfa (Medicago sativa L. CV. Hamedani in Bajgah, Fars Province

    Directory of Open Access Journals (Sweden)

    A. Yazdani

    2015-06-01

    ha-1, respectively. Seeding rates also had a significant effect on number of weeds so that maximum and minimum weed numbers were obtained in 20 kg and 5 kg seed ha-1. Our results showed that 20 kg seed ha-1 and furrow planting method was the best treatment to gain maximum forage yield and minimum weed's detrimental impact.

  5. Using Low Resolution Satellite Imagery for Yield Prediction and Yield Anomaly Detection

    Directory of Open Access Journals (Sweden)

    Oscar Rojas

    2013-04-01

    Full Text Available Low resolution satellite imagery has been extensively used for crop monitoring and yield forecasting for over 30 years and plays an important role in a growing number of operational systems. The combination of their high temporal frequency with their extended geographical coverage generally associated with low costs per area unit makes these images a convenient choice at both national and regional scales. Several qualitative and quantitative approaches can be clearly distinguished, going from the use of low resolution satellite imagery as the main predictor of final crop yield to complex crop growth models where remote sensing-derived indicators play different roles, depending on the nature of the model and on the availability of data measured on the ground. Vegetation performance anomaly detection with low resolution images continues to be a fundamental component of early warning and drought monitoring systems at the regional scale. For applications at more detailed scales, the limitations created by the mixed nature of low resolution pixels are being progressively reduced by the higher resolution offered by new sensors, while the continuity of existing systems remains crucial for ensuring the availability of long time series as needed by the majority of the yield prediction methods used today.

  6. Yield survey and nutritional evaluation of garlic stalk for ruminant feed

    Directory of Open Access Journals (Sweden)

    Y. H. Lee

    2017-10-01

    Full Text Available Abstract Background Very limited information exists on the ruminal degradation kinetics of nutrients in garlic stalk. The present study aimed to survey the annual yield of garlic stalk in Korea and determine its feed-nutritive value for ruminants. Methods In Experiment 1, garlic stalk was incubated in situ in the rumen of two Hanwoo steers (360 ± 15 kg body weight and removed after 12, 24, or 48 h to determine the ruminal degradation kinetics of DM and NDF. Rice straw was also included for comparison. In Experiment 2, In Experiment 2, six male Corriedale sheep were randomized to two dietary treatments to determine the apparent digestibility of nutrients in garlic stalk. Diets included a control ration without garlic stalk (60% concentrate mix +40% ryegrass or a treatment ration (70% control diet +30% garlic stalk. Results The Korean national yield of garlic stalk (sun-dried basis in 2016 was estimated to be 31,910 tons, with the southern coastal regions producing the highest quantity. Compared with rice straw, garlic stalk had lower NDF, higher ADF, and greater effective degradabilities of DM and NDF, resulting in a greater TDN value (56.3%, which was higher than that obtained for rice straw (43.7%. Conclusion These results provide basic information on the ruminal DM and NDF degradation kinetics of garlic stalk, which would be helpful for the efficient utilization of this by-product in ruminant diets.

  7. A values-based Motivational Interviewing (MI) intervention for pediatric obesity: study design and methods for MI Values.

    Science.gov (United States)

    Bean, Melanie K; Mazzeo, Suzanne E; Stern, Marilyn; Bowen, Deborah; Ingersoll, Karen

    2011-09-01

    To reduce pediatric obesity in clinical settings, multidisciplinary behaviorally-based treatment programs are recommended. High attrition and poor compliance are two difficulties frequently encountered in such programs. A brief, empathic and directive clinical intervention, Motivational Interviewing (MI), might help address these motivational and behavioral issues, ultimately resulting in more positive health outcomes. The efficacy of MI as an adjunct in the treatment of pediatric obesity remains relatively understudied. MI Values was developed to implement within an existing multidisciplinary treatment program for obese, ethnically diverse adolescents, the T.E.E.N.S. Program (Teaching, Encouragement, Exercise, Nutrition, Support). T.E.E.N.S. participants who consent to MI Values are randomized to either MI or an education control condition. At weeks 1 and 10 of T.E.E.N.S. participation, the subset of participants assigned to the MI condition engages in individual MI sessions and control participants view health education videos. All MI sessions are audiotaped and coded to monitor treatment fidelity, which has been satisfactory thus far. Participants complete comprehensive assessments at baseline, 3- and 6-month follow-ups. We hypothesize that MI participants will demonstrate greater reductions in Body Mass Index (BMI) percentile, improved diet and physical activity behaviors, better compliance with T.E.E.N.S., and lower attrition than participants in the control group. We present study design and methods for MI Values as well as data on feasibility of recruitment methods and treatment integrity. At study completion, findings will contribute to the emerging literature examining the efficacy of MI in the treatment of pediatric obesity. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Evaluation of the prospects of using new methods of increasing the oil yields of beds in the Chechen-Ingush Autonomous SSR

    Energy Technology Data Exchange (ETDEWEB)

    Sorokin, V.A.

    1979-03-01

    An examination is made of priority sites for the development of oil fields in the Chechen-Ingush ASSR. Basic factors are presented concerning the testing and introduction of various methods of increasing oil yield in those fields: pumping gas under high pressure, steam heat treatment, and alkaline flooding.

  9. Global Annual Final AC Yield Comparison between HCPV and c-Si PV

    Directory of Open Access Journals (Sweden)

    Juan Pablo Ferrer-Rodríguez

    2015-01-01

    Full Text Available A worldwide comparison of the annual yield between conventional c-Si photovoltaic (PV technology and high concentrated photovoltaic (HCPV technology is presented. The idea of this paper is to find the most appropriate locations for HCPV systems in terms of the annual energy produced when comparing to fixed tilt PV systems and two-axis oriented PY systems. For estimating the annual energy generation, the method of the Performance Ratio is used. For some locations with high annual direct normal irradiation values, which are distributed around the world, HCPV systems are found to be more advantageous than fixed tilt PV systems. World maps showing this comparison are presented.

  10. Yields of products from thermal-neutron induced fission of 235U

    International Nuclear Information System (INIS)

    Rudstam, G.; Aagaard, P.; Zwicky, H.U.

    1985-01-01

    Methods for fission yield determinations at an ISOL-system connected to a nuclear reactor have been developed. The present report contains detailed descriptions both of the experimental techniques and of the method used to correct the experimental yields for the decay of short-lived nuclear species in the delay between production and measurement. The methods have been applied to the determination of the fission yields of 40 fission products including 2 isometric pairs in the light mass region and those of 99 fission products including 25 isometric pairs or triplets in the heavy mass region. For 64 cases this is the first determination published. (author)

  11. Machine Maintenance Scheduling with Reliability Engineering Method and Maintenance Value Stream Mapping

    Science.gov (United States)

    Sembiring, N.; Nasution, A. H.

    2018-02-01

    Corrective maintenance i.e replacing or repairing the machine component after machine break down always done in a manufacturing company. It causes the production process must be stopped. Production time will decrease due to the maintenance team must replace or repair the damage machine component. This paper proposes a preventive maintenance’s schedule for a critical component of a critical machine of an crude palm oil and kernel company due to increase maintenance efficiency. The Reliability Engineering & Maintenance Value Stream Mapping is used as a method and a tool to analize the reliability of the component and reduce the wastage in any process by segregating value added and non value added activities.

  12. Nutritional value of breast and thigh muscle of chukar partridge (Alectoris chukar under intensive fattening conditions

    Directory of Open Access Journals (Sweden)

    Radovan Jůzl

    2012-01-01

    Full Text Available The aim of our study was to evaluate the nutritional value of the breast and thigh muscle of chukar partridge (Alectoris chukar under intensive fattening conditions. Commercial feeding mixtures for broilers were used. Live weight of 60 partridges (birds were not sexed was controlled during 90 days of fattening. After the fattening was finished, 30 birds were selected to monitor the carcass yield. Breast and thigh muscle were used for chemical analysis of crude protein (Kjeldahl method, total lipids (fat analyser ANKOMXT10, ash (Muffle furnace - 550° C and gross energy (calorimetry. Average values ​​of live weight were increasing in the course of fattening; at the end of fattening the live weight reached 0.452 kg. The carcass yield, breast muscle yield and thigh yield were evaluated (73.72%, 18.09%, 20.80%, respectively. Chemical analysis showed a highly significant difference (P ≤ 0.01 between the breast and thigh muscle for crude protein, fat, ash and gross energy. The ash content demonstrated a significant difference (P ≤ 0.05 between the breast and thigh muscle. This study brings new data on the nutritional value of the meat of chukar partridge that can be used for reccomendation of a suitable feeding mixture.

  13. Methodical approaches to value assessment and determination of the capitalization level of high-rise construction

    Science.gov (United States)

    Smirnov, Vitaly; Dashkov, Leonid; Gorshkov, Roman; Burova, Olga; Romanova, Alina

    2018-03-01

    The article presents the analysis of the methodological approaches to cost estimation and determination of the capitalization level of high-rise construction objects. Factors determining the value of real estate were considered, three main approaches for estimating the value of real estate objects are given. The main methods of capitalization estimation were analyzed, the most reasonable method for determining the level of capitalization of high-rise buildings was proposed. In order to increase the value of real estate objects, the author proposes measures that enable to increase significantly the capitalization of the enterprise through more efficient use of intangible assets and goodwill.

  14. PREDICTIVE VALUE OF CD34+ CELLS IN BLOOD OF PATIENT/DONOR BEFORE HEMATOPOIETIC STEM CELLS COLLECTION BY LEUKAPHERESIS

    Directory of Open Access Journals (Sweden)

    Dragoslav Domanovič

    2004-12-01

    Full Text Available Background. In the study we tried to define a predictive value of the circulating CD34+ cells in patients/ donors blood for estimation of the hematopoietic stem cells (HSC collection efficacy determine the optimal time to initiate the collection by leukapheresis procedure.Methods. We retrospectively analyzed 75 collections of HSC using the Amicus cell separator in 39 patients and 15 donors. Circulating CD34+cell counts in patients/donors were compared to the achieved CD34+ cell yields to determine its predictive value for the collection of a targeted yield of > 2 × 106 CD34+ cells/kg body weight of patient.Results. The results of cell counts confirmed that mobilization regimens were successful and HSC collections efficient. High correlation coefficient (r = 0.82 between the number of circulating CD34+ cells before collection and CD34+ cell yield/kg of patient’s body weight was statistically significant (p < 0.05. With ROC analysis we determined the cut-off value 42 × 106/l CD34+ cell counts in the blood of patients/donors before collection that had a positive predictive value 87% and a negative predictive value 91.6%.Conclusions. Analysis showed that the number of circulating CD34+ cells before the procedure express a very high predictive value and can be used for determining the optimal time to initiate collection of HSC by leukapheresis.

  15. Yielding the yield-stress analysis: a study focused on the effects of elasticity on the settling of a single spherical particle in simple yield-stress fluids.

    Science.gov (United States)

    Fraggedakis, D; Dimakopoulos, Y; Tsamopoulos, J

    2016-06-28

    coefficient, as a function of the gravity number, Yg (related to the Bingham number), for different levels of elasticity and for its critical value, under which entrapment of particles occurs. These criteria are in agreement with the results found in the recent work by Ahonguio et al. (2014). Finally, we propose a method to quantify experimentally the elastic effects in viscoplastic particulate systems.

  16. The method of extraction of subspectra with appreciably different values of hyperfine interaction parameters from Moessbauer spectra

    International Nuclear Information System (INIS)

    Nemtsova, O.M.

    2006-01-01

    The task of Moessbauer spectra processing of complex locally inhomogeneous or multi-phase systems is to reveal subspectral contributions with appreciably different values of hyperfine interaction parameters (HFI) in them. A universal method of processing such spectra is suggested which allows to extract the probability density distribution (PDD) of HFI parameters corresponding to the subspectra with essentially different parameters values. The basis of the method is Tikhonov's regularization method with selection for each subspectrum its own value of the regularization parameter. The universal application of the method is demonstrated in the examples of processing real spectra with different sets of subspectral contributions

  17. Yield strengths of tungsten-base composites determined from bend tests

    International Nuclear Information System (INIS)

    Zukas, E.G.; Eash, D.T.

    1976-08-01

    The variation in yield strength with either strain rate or temperature was determined for a number of tungsten-base composites by use of the simple three-point bend test. The yield strengths were comparable with those obtained in standard tensile tests. Additional studies on 1019 steel, either in the as-rolled or annealed condition, gave results in agreement with handbook values, as did two aluminum alloys. These results demonstrate that the bend test deserves wider acceptance in materials testing programs

  18. An analytical method of estimating Value-at-Risk on the Belgrade Stock Exchange

    Directory of Open Access Journals (Sweden)

    Obadović Milica D.

    2009-01-01

    Full Text Available This paper presents market risk evaluation for a portfolio consisting of shares that are continuously traded on the Belgrade Stock Exchange, by applying the Value-at-Risk model - the analytical method. It describes the manner of analytical method application and compares the results obtained by implementing this method at different confidence levels. Method verification was carried out on the basis of the failure rate that demonstrated the confidence level for which this method was acceptable in view of the given conditions.

  19. Neglecting rice milling yield and quality underestimates economic losses from high-temperature stress.

    Directory of Open Access Journals (Sweden)

    Nathaniel B Lyman

    Full Text Available Future increases in global surface temperature threaten those worldwide who depend on rice production for their livelihoods and food security. Past analyses of high-temperature stress on rice production have focused on paddy yield and have failed to account for the detrimental impact of high temperatures on milling quality outcomes, which ultimately determine edible (marketable rice yield and market value. Using genotype specific rice yield and milling quality data on six common rice varieties from Arkansas, USA, combined with on-site, half-hourly and daily temperature observations, we show a nonlinear effect of high-temperature stress exposure on yield and milling quality. A 1 °C increase in average growing season temperature reduces paddy yield by 6.2%, total milled rice yield by 7.1% to 8.0%, head rice yield by 9.0% to 13.8%, and total milling revenue by 8.1% to 11.0%, across genotypes. Our results indicate that failure to account for changes in milling quality leads to understatement of the impacts of high temperatures on rice production outcomes. These dramatic losses result from reduced paddy yield and increased percentages of chalky and broken kernels, which together decrease the quantity and market value of milled rice. Recently published estimates show paddy yield reductions of up to 10% across the major rice-producing regions of South and Southeast Asia due to rising temperatures. The results of our study suggest that the often-cited 10% figure underestimates the economic implications of climate change for rice producers, thus potentially threatening future food security for global rice producers and consumers.

  20. Absolute quantum yield measurements for the formation of oxygen ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. The dynamics of formation of oxygen atoms after UV photoexcitation of .... The SO2 pressure in the cell was typically 30–55 mTorr (monitored by an MKS .... With this value the quantum yield for O(3P) formation could be calculated to.

  1. Yields of products from thermal-neutron induced fission of 235U

    International Nuclear Information System (INIS)

    Aagaard, P.; Rudstam, G.; Zwicky, H.U.

    1982-01-01

    Methods for fission yield determinations at an ISOL-system connected nuclear reactor have been developed. The present report contains detailed descriptions both of the experimental techniques and of the method used to correct the experimental yields for the decay of short-lived nuclear species in the delay between production and measurement. (Authors)

  2. Effect of Limited Drip Irrigation Regime on Yield and Yield Components of Sesame under Mediterranean Conditions

    Directory of Open Access Journals (Sweden)

    Panayiota PAPASTYLIANOU

    2017-05-01

    Full Text Available Sesame is one of the most important oilseed crops in the world. Irrigation is of great importance to sesame production due to its positive effect on growth parameters. Although sesame has good drought tolerance compared with many other crops, it is particularly susceptible to drought damage during the seedling, flowering and seed filling stages and this can lead to yield loss. The aim of this study was to determine the response of sesame landraces to different irrigation applications during the 2015 growing season. The experiment was set up as a split plot design with three replicates, four main plots (irrigation treatments, designated as 100%, 75% 50% and 0 of the daily crop evapotranspiration and two sub-plots (sesame landraces, Limnos and Evros. Different characteristics such as plant height, number of seeds per capsule, and number of capsules per plant, seed yield, 1000-seed weight and % capsules without seeds, were recorded. The results indicated that all traits except 1000-seed weight were significantly affected by irrigation regimes. Plant height, shattering losses and number of capsules per plant decreased with increasing water shortage. Seed yield and number of seeds per capsule were less affected by irrigation level and showed higher values in the 50% of the daily crop evapotranspiration treatment. Limnos produced higher seed yield and number of seeds per capsule under all irrigation regimes. Evros showed higher plant height and shattering losses than Limnos. The results of this study suggest that sesame landraces can use water efficiently, are locally adapted and associated with traditional farming systems.

  3. Effects of Management Practices on Meloidogyne incognita and Snap Bean Yield.

    Science.gov (United States)

    Smittle, D A; Johnson, A W

    1982-01-01

    Phenamiphos applied at 6.7 kg ai/ha through a solid set or a center pivot irrigation system with 28 mm of water effectively controlled root-knot nematodes, Meloidogyne incognita, and resulted in greater snap bean growth and yields irrespective of growing season, tillage method, or cover crop system. The percentage yield increases attributed to this method of M. incognita control over nontreated controls were 45% in the spring crop, and 90% and 409% in the fall crops following winter rye and fallow, respectively. Root galling was not affected by tillage systems or cover crop, but disk tillage resulted in over 50% reduction in bean yield compared with yields from the subsoil-bed tillage system.

  4. Effect of Different Treatments of Mixed and Row Intercropping on Yield and Yield Components of Sesame and Bean

    Directory of Open Access Journals (Sweden)

    Sh Ghale Noyee

    2017-12-01

    , respectively. Hand-weeding method was used for controlling weeds. The first was done when most plants were, in the 6 leaf stage and in the height about 15cm, continued every 13 days until the growth of the canopy limited the growth of weeds. There was not used any fertilizer during the growing season. At the end of the growing season traits such as 1000 seed weight, number of capsules or pods per plant, number of seeds per capsule or pod, biological yield, seed yield and harvest index were recorded. In addition, the land equivalent ratio (LER was calculated to determine the advantages of intercropping. Analysis of variance and Duncan's mean comparison were used for statistical analysis. Results and Discussion The results showed that intercropping had a significant effect on all traits, in sesame and bean. 1000 seed weigh, number of capsules or pods per plant, number of seeds per capsule or pod and harvest index in the treatments of 25s75b, 50s50b and 75s25b, were the highest amounts. Number of seed per plant, seed yield and harvest index in sesame and 1000 seed weight, biological yield and seed yield in bean were affected by planting type which row planting had higher value than mixed planting. This can be due to better use of resources and avoid inter and intra species competition, in the circumstances stated above. The results showed that the total LER, LER of sesame, and LER of bean were higher in replacement intercropping planting than mixed planting. In addition, replacement intercropping had better performance in total LER, LER of sesame, and LER of bean, to additive intercropping. Also, total LER was more than 1 which highest values were observed in the treatments of 25s75b, 50s50b, 30s100b, 75s25b, 100s 30b and 10s100b (1.22, 1.19, 1.15, 1.15 and 1.14, respectively. It seems that better utilize of the growth resource in the inter cropping led to reach this result. The results showed that presence of bean in intercropping had positive effects on sesame, so that the

  5. Reconstruction method for fluorescent X-ray computed tomography by least-squares method using singular value decomposition

    Science.gov (United States)

    Yuasa, T.; Akiba, M.; Takeda, T.; Kazama, M.; Hoshino, A.; Watanabe, Y.; Hyodo, K.; Dilmanian, F. A.; Akatsuka, T.; Itai, Y.

    1997-02-01

    We describe a new attenuation correction method for fluorescent X-ray computed tomography (FXCT) applied to image nonradioactive contrast materials in vivo. The principle of the FXCT imaging is that of computed tomography of the first generation. Using monochromatized synchrotron radiation from the BLNE-5A bending-magnet beam line of Tristan Accumulation Ring in KEK, Japan, we studied phantoms with the FXCT method, and we succeeded in delineating a 4-mm-diameter channel filled with a 500 /spl mu/g I/ml iodine solution in a 20-mm-diameter acrylic cylindrical phantom. However, to detect smaller iodine concentrations, attenuation correction is needed. We present a correction method based on the equation representing the measurement process. The discretized equation system is solved by the least-squares method using the singular value decomposition. The attenuation correction method is applied to the projections by the Monte Carlo simulation and the experiment to confirm its effectiveness.

  6. Spectral methods for a nonlinear initial value problem involving pseudo differential operators

    International Nuclear Information System (INIS)

    Pasciak, J.E.

    1982-01-01

    Spectral methods (Fourier methods) for approximating the solution of a nonlinear initial value problem involving pseudo differential operators are defined and analyzed. A semidiscrete approximation to the nonlinear equation based on an L 2 projection is described. The semidiscrete L 2 approximation is shown to be a priori stable and convergent under sufficient decay and smoothness assumptions on the initial data. It is shown that the semidiscrete method converges with infinite order, that is, higher order decay and smoothness assumptions imply higher order error bounds. Spectral schemes based on spacial collocation are also discussed

  7. Variational Iteration Method for Fifth-Order Boundary Value Problems Using He's Polynomials

    Directory of Open Access Journals (Sweden)

    Muhammad Aslam Noor

    2008-01-01

    Full Text Available We apply the variational iteration method using He's polynomials (VIMHP for solving the fifth-order boundary value problems. The proposed method is an elegant combination of variational iteration and the homotopy perturbation methods and is mainly due to Ghorbani (2007. The suggested algorithm is quite efficient and is practically well suited for use in these problems. The proposed iterative scheme finds the solution without any discritization, linearization, or restrictive assumptions. Several examples are given to verify the reliability and efficiency of the method. The fact that the proposed technique solves nonlinear problems without using Adomian's polynomials can be considered as a clear advantage of this algorithm over the decomposition method.

  8. Effect of Row Intercropping Patterns on Yield, Yield Components, and Weed Control of Fenugreek (Trigonellafoenumgreacum L. and Anise (Pimpinellaanisum L.

    Directory of Open Access Journals (Sweden)

    F Mardani

    2016-02-01

    Full Text Available Introduction Due to population growth and food shortage agricultural production is on increasing demand. In this order increasing cultivation area and yield per unit area are two ways of obtaining higheragricultural production (20. There is another important way that without incurring additional costs and use of water and fertilizer could result in higher production. This approach is increasing agricultural production per unit area by growing more than one crop in a year. Intercropping will be successful when competition for sources issless than competition within a species. Plants in the mixture can be chosen in a way that a species benefits from environmental changes caused by other species in mixed cultures directly (7, 15. Intercropping inhibits the growth and development of weeds and leads to increased production. Since the system will reduce the pesticide use, environmental pollution will be also less proportionally (37. Materials and Methods In order to evaluate the yield, yield components and potential weeds control under intercropping fenugreek and anise, an experiment was carried out based on a randomized complete block design with three replicationsat the Agricultural Research Field of Yasouj University during growing season of 2012-2013. Treatments included pure cultures of fenugreek and anise, single-row, double-row and three-tier intercropping of fenugreek and anise at no weed control and weed control conditions. Results and Discussion The results showed that different intercropping treatments had significant effects on pod number per plant, grain weight and grain and biological yield of fenugreek and also, on number of lateral branches, number of grains per plant and grain and biological yield of anise. There were nosignificant effects on plant height, number of lateral branches, number of grain per pod, harvest index of fenugreek, as well as plant height, number of umbel let per plant, seed weight and harvest index of anise. The

  9. Preparation of DNA from cytological material: effects of fixation, staining, and mounting medium on DNA yield and quality.

    Science.gov (United States)

    Dejmek, Annika; Zendehrokh, Nooreldin; Tomaszewska, Malgorzata; Edsjö, Anders

    2013-07-01

    Personalized oncology requires molecular analysis of tumor cells. Several studies have demonstrated that cytological material is suitable for DNA analysis, but to the authors' knowledge there are no systematic studies comparing how the yield and quality of extracted DNA is affected by the various techniques used for the preparation of cytological material. DNA yield and quality were compared using cultured human lung cancer cells subjected to different preparation techniques used in routine cytology, including fixation, mounting medium, and staining. The results were compared with the outcome of epidermal growth factor receptor (EGFR) genotyping of 66 clinical cytological samples using the same DNA preparation protocol. All tested protocol combinations resulted in fragment lengths of at least 388 base pairs. The mounting agent EcoMount resulted in higher yields than traditional xylene-based medium. Spray and ethanol fixation resulted in both a higher yield and better DNA quality than air drying. In liquid-based cytology (LBC) methods, CytoLyt solution resulted in a 5-fold higher yield than CytoRich Red. Papanicolaou staining provided twice the yield of hematoxylin and eosin staining in both liquid-based preparations. Genotyping outcome and quality control values from the clinical EGFR genotyping demonstrated a sufficient amount and amplifiability of DNA in both spray-fixed and air-dried cytological samples. Reliable clinical genotyping can be performed using all tested methods. However, in the cell line experiments, spray- or ethanol-fixed, Papanicolaou-stained slides provided the best results in terms of yield and fragment length. In LBC, the DNA recovery efficiency of the preserving medium may differ considerably, which should be taken into consideration when introducing LBC. Cancer (Cancer Cytopathol) 2013;121:344-353. © 2013 American Cancer Society. © 2013 American Cancer Society.

  10. Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

    Science.gov (United States)

    Duan, X.; Rong, L.; Gu, Z.; Feng, D.

    2017-12-01

    Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.

  11. Genotype x environment interaction for grain yield of wheat genotypes tested under water stress conditions

    International Nuclear Information System (INIS)

    Sail, M.A.; Dahot, M.U.; Mangrio, S.M.; Memon, S.

    2007-01-01

    Effect of water stress on grain yield in different wheat genotypes was studied under field conditions at various locations. Grain yield is a complex polygenic trait influenced by genotype, environment and genotype x environment (GxE) interaction. To understand the stability among genotypes for grain yield, twenty-one wheat genotypes developed Through hybridization and radiation-induced mutations at Nuclear Institute of Agriculture (NIA) TandoJam were evaluated with four local check varieties (Sarsabz, Thori, Margalla-99 and Chakwal-86) in multi-environmental trails (MET/sub s/). The experiments were conducted over 5 different water stress environments in Sindh. Data on grain yield were recorded from each site and statistically analyzed. Combined analysis of variance for all the environments indicated that the genotype, environment and genotype x environment (GxE) interaction were highly significant (P greater then 0.01) for grain yield. Genotypes differed in their response to various locations. The overall highest site mean yield (4031 kg/ha) recorded at Moro and the lowest (2326 kg/ha) at Thatta. Six genotypes produced significantly (P=0.01) the highest grain yield overall the environments. Stability analysis was applied to estimate stability parameters viz., regression coefficient (b), standard error of regression coefficient and variance due to deviation from regression (S/sub 2/d) genotypes 10/8, BWS-78 produced the highest mean yield over all the environments with low regression coefficient (b=0.68, 0.67 and 0.63 respectively and higher S/sup 2/ d value, showing specific adaptation to poor (un favorable) environments. Genotype 8/7 produced overall higher grain yield (3647 kg/ha) and ranked as third high yielding genotype had regression value close to unity (b=0.9) and low S/sup d/ value, indicating more stability and wide adaptation over the all environments. The knowledge of the presence and magnitude of genotype x environment (GE) interaction is important to

  12. Value and depreciation of mineral resources over the very long run: An empirical contrast of different methods

    OpenAIRE

    Rubio Varas, M. del Mar

    2005-01-01

    The paper contrasts empirically the results of alternative methods for estimating the value and the depreciation of mineral resources. The historical data of Mexico and Venezuela, covering the period 1920s-1980s, is used to contrast the results of several methods. These are the present value, the net price method, the user cost method and the imputed income method. The paper establishes that the net price and the user cost are not competing methods as such, but alternative adjustments to diff...

  13. Estimates of margins in ASME Code strength values for stainless steel nuclear piping

    International Nuclear Information System (INIS)

    Ware, A.G.

    1995-01-01

    The margins in the ASME Code stainless steel allowable stress values that can be attributed to the variations in material strength are evaluated for nuclear piping steels. Best-fit curves were calculated for the material test data that were used to determine allowable stress values for stainless steels in the ASME Code, supplemented by more recent data, to estimate the mean stresses. The mean yield stresses (on which the stainless steel S m values are based) from the test data are about 15 to 20% greater than the ASME Code yield stress values. The ASME Code yield stress values are estimated to approximately coincide with the 97% confidence limit from the test data. The mean and 97% confidence limit values can be used in the probabilistic risk assessments of nuclear piping

  14. The value of different vegetative indices (NDVI, GAI for the assessment of yield potential of pea (Pisum sativum L. at different growth stages and under varying management practices

    Directory of Open Access Journals (Sweden)

    Agnieszka Klimek-Kopyra

    2018-03-01

    Full Text Available This research evaluated the NDVI (normalized difference vegetation index and GAI (green area index in order to indicate the productivity and developmental effects of Rhizobium inoculants and microelement foliar fertilizer on pea crops. Two inoculants, Nitragina (a commercial inoculant and IUNG (a noncommercial inoculant gel and a foliar fertilizer (Photrel were studied over a 4-year period, 2009–2012. The cultivars chosen for the studies were characterized by different foliage types, namely a semileafless pea ‘Tarchalska’ and one with regular foliage, ‘Klif’. Foliar fertilizer significantly increased the length of the generative shoots and the number of fruiting nodes in comparison to the control, which in turn had a negative impact on the harvest index. Pea seed yield was highly dependent on the interaction between the years of growth and the microbial inoculant, and was greater for ‘Tarchalska’ (4.33 t ha−1. Presowing inoculation of seeds and foliar fertilization resulted in a significantly higher value of GAI at the flowering (3.91 and 3.81, respectively and maturity stages (4.82 and 4.77, respectively, whereas the value of NDVI was higher for these treatments only at the maturity stage (0.67 and 0.79, respectively. A significantly greater yield (5.0–5.4 t ha−1 was obtained after inoculation with IUNG during the dry years.

  15. Yield trends and yield gap analysis of major crops in the world

    NARCIS (Netherlands)

    Hengsdijk, H.; Langeveld, J.W.A.

    2009-01-01

    This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are

  16. Chlorella vulgaris vs cyanobacterial biomasses: Comparison in terms of biomass productivity and biogas yield

    International Nuclear Information System (INIS)

    Mendez, Lara; Mahdy, Ahmed; Ballesteros, Mercedes; González-Fernández, Cristina

    2015-01-01

    Highlights: • Cyanobacteria and C. vulgaris were compared in terms of growth and methane production. • Biomasses were subjected to anaerobic digestion without applying any disruption method. • Cyanobacteria showed an increased methane yield in comparison with C. vulgaris. - Abstract: The aim of the present study was to compare cyanobacteria strains (Aphanizomenon ovalisporum, Anabaena planctonica, Borzia trilocularis and Synechocystis sp.) and microalgae (Chlorella vulgaris) in terms of growth rate, biochemical profile and methane production. Cyanobacteria growth rate ranged 0.5–0.6 day −1 for A. planctonica, A. ovalisporum and Synecochystis sp. and 0.4 day −1 for B. tricularis. Opposite, C. vulgaris maximum growth rate was double (1.2 day −1 ) than that of cyanobacteria. Regarding the methane yield, microalgae C. vulgaris averaged 120 mL CH 4 g COD in −1 due to the presence of a strong cell wall. On the other hand, anaerobic digestion of cyanobacteria supported higher methane yields. B. trilocularis and A. planctonica presented 1.42-fold higher methane yield than microalgae while this value was raised to approximately 1.85-fold for A. ovalisporum and Synechochystis sp. In the biogas production context, this study showed that the low growth rates of cyanobacteria can be overcome by their increased anaerobic digestibility when compared to their microalgae counterpartners, such is the case of C. vulgaris

  17. Closing Yield Gaps: How Sustainable Can We Be?

    Directory of Open Access Journals (Sweden)

    Prajal Pradhan

    Full Text Available Global food production needs to be increased by 60-110% between 2005 and 2050 to meet growing food and feed demand. Intensification and/or expansion of agriculture are the two main options available to meet the growing crop demands. Land conversion to expand cultivated land increases GHG emissions and impacts biodiversity and ecosystem services. Closing yield gaps to attain potential yields may be a viable option to increase the global crop production. Traditional methods of agricultural intensification often have negative externalities. Therefore, there is a need to explore location-specific methods of sustainable agricultural intensification. We identified regions where the achievement of potential crop calorie production on currently cultivated land will meet the present and future food demand based on scenario analyses considering population growth and changes in dietary habits. By closing yield gaps in the current irrigated and rain-fed cultivated land, about 24% and 80% more crop calories can respectively be produced compared to 2000. Most countries will reach food self-sufficiency or improve their current food self-sufficiency levels if potential crop production levels are achieved. As a novel approach, we defined specific input and agricultural management strategies required to achieve the potential production by overcoming biophysical and socioeconomic constraints causing yield gaps. The management strategies include: fertilizers, pesticides, advanced soil management, land improvement, management strategies coping with weather induced yield variability, and improving market accessibility. Finally, we estimated the required fertilizers (N, P2O5, and K2O to attain the potential yields. Globally, N-fertilizer application needs to increase by 45-73%, P2O5-fertilizer by 22-46%, and K2O-fertilizer by 2-3 times compared to the year 2010 to attain potential crop production. The sustainability of such agricultural intensification largely depends

  18. Appling Laplace Adomian decomposition method for delay differential equations with boundary value problems

    Science.gov (United States)

    Yousef, Hamood Mohammed; Ismail, Ahmad Izani

    2017-11-01

    In this paper, Laplace Adomian decomposition method (LADM) was applied to solve Delay differential equations with Boundary Value Problems. The solution is in the form of a convergent series which is easy to compute. This approach is tested on two test problem. The findings obtained exhibit the reliability and efficiency of the proposed method.

  19. Applying Novel Time-Frequency Moments Singular Value Decomposition Method and Artificial Neural Networks for Ballistocardiography

    Directory of Open Access Journals (Sweden)

    Koivistoinen Teemu

    2007-01-01

    Full Text Available As we know, singular value decomposition (SVD is designed for computing singular values (SVs of a matrix. Then, if it is used for finding SVs of an -by-1 or 1-by- array with elements representing samples of a signal, it will return only one singular value that is not enough to express the whole signal. To overcome this problem, we designed a new kind of the feature extraction method which we call ''time-frequency moments singular value decomposition (TFM-SVD.'' In this new method, we use statistical features of time series as well as frequency series (Fourier transform of the signal. This information is then extracted into a certain matrix with a fixed structure and the SVs of that matrix are sought. This transform can be used as a preprocessing stage in pattern clustering methods. The results in using it indicate that the performance of a combined system including this transform and classifiers is comparable with the performance of using other feature extraction methods such as wavelet transforms. To evaluate TFM-SVD, we applied this new method and artificial neural networks (ANNs for ballistocardiogram (BCG data clustering to look for probable heart disease of six test subjects. BCG from the test subjects was recorded using a chair-like ballistocardiograph, developed in our project. This kind of device combined with automated recording and analysis would be suitable for use in many places, such as home, office, and so forth. The results show that the method has high performance and it is almost insensitive to BCG waveform latency or nonlinear disturbance.

  20. Study of microplasticity of bcc metals by quasirelaxation method

    International Nuclear Information System (INIS)

    Ermishkin, V.A.; Plastinin, V.M.

    1977-01-01

    The microplasticity of single crystals of tungsten of orientation and of polycrystalline wire samples of molybdenum and of a tungsten-rhenium alloy has been investigated by a new method of quasi-relaxation at room temperature. It is shown that the micro-yield limit values determined by mechanostatic hysteresis and by least quasi-relaxation stress methods agree well one with another and for W lie, in the range between 0.25 and 0.35 kg/mm 2 . A formula, based on model assumptions of the mechanism of plastic deformation, is derived to describe the deformation curve in the micro-yield range. It has been established that the micro-yield limit is not a characteristic of the material proper, as it varies as a function of the base of the tests

  1. A Method for Determining Pseudo-measurement State Values for Topology Observability of State Estimation in Power Systems

    Science.gov (United States)

    Urano, Shoichi; Mori, Hiroyuki

    This paper proposes a new technique for determining of state values in power systems. Recently, it is useful for carrying out state estimation with data of PMU (Phasor Measurement Unit). The authors have developed a method for determining state values with artificial neural network (ANN) considering topology observability in power systems. ANN has advantage to approximate nonlinear functions with high precision. The method evaluates pseudo-measurement state values of the data which are lost in power systems. The method is successfully applied to the IEEE 14-bus system.

  2. Qualitative and quantitative assessment of DNA quality of frozen beef based on DNA yield, gel electrophoresis and PCR amplification and their correlations to beef quality.

    Science.gov (United States)

    Zhao, Jing; Zhang, Ting; Liu, Yongfeng; Wang, Xingyu; Zhang, Lan; Ku, Ting; Quek, Siew Young

    2018-09-15

    Freezing is a practical method for meat preservation but the quality of frozen meat can deteriorate with storage time. This research investigated the effect of frozen storage time (up to 66 months) on changes in DNA yield, purity and integrity in beef, and further analyzed the correlation between beef quality (moisture content, protein content, TVB-N value and pH value) and DNA quality in an attempt to establish a reliable, high-throughput method for meat quality control. Results showed that frozen storage time influenced the yield and integrity of DNA significantly (p quality degraded dramatically with the increased storage time based on gel electrophoresis results. Polymerase chain reaction (PCR) products from both mitochondrial DNA (mtDNA) and nuclear DNA (nDNA) were observed in all frozen beef samples. Using real-time PCR for quantitative assessment of DNA and meat quality revealed that correlations could be established successfully with mathematical models to evaluate frozen beef quality. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. The travel cost method and the economic value of leisure time

    Science.gov (United States)

    Douglas, Aaron J.; Johnson, Richard L.

    2004-01-01

    Recent estimates of high values for tourist related recreation USA amenity values indicate that allocation of basic water and terrestrial resources to recreation activities should be given precedence over conventional market oriented activities that often degrade or even extirpate the resource. We discuss at length the travel cost method (TCM), a survey based technique that quantifies the non-market benefits of trips to recreation sites. The TCM has been cast in the role of an ‘umpire’ in recent resource allocation debates. Understanding the key role of the TCM in the debate will aid tourist agency officials throughout the world. This article is a U.S. Government work and is in the public domain in the U.S.A.

  4. Novel method of interpolation and extrapolation of functions by a linear initial value problem

    CSIR Research Space (South Africa)

    Shatalov, M

    2008-09-01

    Full Text Available A novel method of function approximation using an initial value, linear, ordinary differential equation (ODE) is presented. The main advantage of this method is to obtain the approximation expressions in a closed form. This technique can be taught...

  5. The Interval-Valued Triangular Fuzzy Soft Set and Its Method of Dynamic Decision Making

    OpenAIRE

    Xiaoguo Chen; Hong Du; Yue Yang

    2014-01-01

    A concept of interval-valued triangular fuzzy soft set is presented, and some operations of “AND,” “OR,” intersection, union and complement, and so forth are defined. Then some relative properties are discussed and several conclusions are drawn. A dynamic decision making model is built based on the definition of interval-valued triangular fuzzy soft set, in which period weight is determined by the exponential decay method. The arithmetic weighted average operator of interval-valued triangular...

  6. The Effect of Application of Nitrogen Fertilizer and Nano-Organic Manure on Yield, Yield Components and Essential Oil of Fennel (Foeniculum vulgar Mill.

    Directory of Open Access Journals (Sweden)

    S Khoshpeyk

    2017-03-01

    emergence. The rest of irrigation was done every 5 days. The spacing between plants were 20 cm that was achieved by thinning plants in 3-4 leaves stage .Weeding was done manually tree times. Fennel harvesting was done in early September at the time of physiological maturity. At the first five plants harvested randomly from each plot for measurement of plant height, the number of lateral branches per plant, the number of umbels per plant, the number of seeds per umbel, the number of seeds per plant, weight of 1000 seed and fresh and dry weight of plant. Then for measurement of biomass, grain yield and harvest index, one m-2 of center of each plot was harvested. Seed and straw essence were measured using distillation method with distilled water by Clevenger apparatus. The data was analyzed using the SAS software. Means comparisons were done with Duncan’s multiple rang test at 5% probability. Results and Discussion Results showed that height, the number of lateral branches, the number of umbels per plants, the number of seeds per plant, 1000 seed weight, dry weight, seed yield, straw yield, biological yield, harvest index, and essence yield were affected by nano-organic manure. Nitrogen fertilizers had significant effect on height, the number of seeds per umbrella, the number of seeds per plant, plant fresh and dry weight, seed yield, straw yield, biological yield and essence yields while the number of lateral branches, umbels per plant, seed weight and harvest index was not affected by this factor. The interaction of nano- organic manure and nitrogen fertilizer had not significant effect on the measurement characteristics. While the application of 10 ton ha-1 of nano-organic manure or 25 kg ha-1 of nitrogen fertilizer could increase biological, seed, straw and essential oil yield, higher amount utilization values of each treatment had no effect .Consumption of 25 kg ha-1 of nitrogen fertilizer increased seed yield by increasing the biological yield, while 10 tons ha-1 nano

  7. Baudrillard's Theory of Value

    DEFF Research Database (Denmark)

    Zander, Pär Ola

    2014-01-01

    theory. The paper concludes that Baudrillard's arguments for abandoning Marxism altogether are problematic and led him away from developing a more finished theory of value. This is unfortunate because it remains a project that may yield interesting insights even in contemporary social theory, not least......Jean Baudrillard outlined a theory of value in his early writings that built on, but also criticized, Marxist concepts of use value and exchange value. In this paper, I use a close reading to delineate the diachronic transition of Baudrillard's writings toward anti-Marxism and (allegedly......) postmodernism, with specific focus on his value theory, in order to understand his own reasons for abandoning his previous position. I then follow the marginal stream of scholars who are making use of the early Baudrillard. I find his value theory promising but still a mere sketch rather than an actual general...

  8. Dual-component video image analysis system (VIASCAN) as a predictor of beef carcass red meat yield percentage and for augmenting application of USDA yield grades.

    Science.gov (United States)

    Cannell, R C; Tatum, J D; Belk, K E; Wise, J W; Clayton, R P; Smith, G C

    1999-11-01

    An improved ability to quantify differences in the fabrication yields of beef carcasses would facilitate the application of value-based marketing. This study was conducted to evaluate the ability of the Dual-Component Australian VIASCAN to 1) predict fabricated beef subprimal yields as a percentage of carcass weight at each of three fat-trim levels and 2) augment USDA yield grading, thereby improving accuracy of grade placement. Steer and heifer carcasses (n = 240) were evaluated using VIASCAN, as well as by USDA expert and online graders, before fabrication of carcasses to each of three fat-trim levels. Expert yield grade (YG), online YG, VIASCAN estimates, and VIASCAN estimated ribeye area used to augment actual and expert grader estimates of the remaining YG factors (adjusted fat thickness, percentage of kidney-pelvic-heart fat, and hot carcass weight), respectively, 1) accounted for 51, 37, 46, and 55% of the variation in fabricated yields of commodity-trimmed subprimals, 2) accounted for 74, 54, 66, and 75% of the variation in fabricated yields of closely trimmed subprimals, and 3) accounted for 74, 54, 71, and 75% of the variation in fabricated yields of very closely trimmed subprimals. The VIASCAN system predicted fabrication yields more accurately than current online yield grading and, when certain VIASCAN-measured traits were combined with some USDA yield grade factors in an augmentation system, the accuracy of cutability prediction was improved, at packing plant line speeds, to a level matching that of expert graders applying grades at a comfortable rate.

  9. On yield gaps and yield gains in intercropping

    NARCIS (Netherlands)

    Gou, Fang; Yin, Wen; Hong, Yu; Werf, van der Wopke; Chai, Qiang; Heerink, Nico; Ittersum, van Martin K.

    2017-01-01

    Wheat-maize relay intercropping has been widely used by farmers in northwest China, and based on field experiments agronomists report it has a higher productivity than sole crops. However, the yields from farmers’ fields have not been investigated yet. Yield gap analysis provides a framework to

  10. Genotypic Correlation and Path Analysis of Some Traits related to Oil Yield and Grain Yield in Canola (Brassica napus L. under Non-stress and Water Deficit Stress Conditions

    Directory of Open Access Journals (Sweden)

    A Ismaili

    2017-03-01

    Full Text Available Introduction Obtaining varieties with acceptable yield and tolerant to different arid and semi-arid climate condition of Iran is an important goal in canola breeding programs. Selection of genotypes base on one or more traits without regarding to correlation between them, could biases the expected results. Therefore, identifying of genetic correlation among traits especially in environmental stress condition is very important. The use of genotypic correlation helps evaluating the magnitude and direction of associations between characters facilitating the application of indirect selection, because genetic changes in a given trait may change other traits, leading to faster and larger genetic gains in plant breeding programs. Therefore, the selection for another trait may result in indirect response in the low heritable trait, provided the following conditions are satisfied: the genetic correlation between them is substantial, and the heritability of the secondary trait is greater than that of the primary trait. The purpose of this study was estimating the total genotypic variability, genotypic correlations, and path analysis among some important traits for selection criteria for improving seed and oil yield in canola under water deficit stress condition. Materials and Methods For evaluation of genetic correlation among traits and identifying important affecting traits on grain yield and oil yield in canola genotypes, an experiment was conducted based on a randomized complete blocks design with three replications in two different conditions of water deficit (stress and non-stress. Different traits were measured including seed yield, 1000-seed weight, number of seeds per pod, number of pods per plant, silique length, oil content, days to maturity, protein content, plant height and water use efficiency. Genotypic and phenotypic correlation coefficients were calculated for ten characters during growing seasons. The genotypic correlation coefficients

  11. Yielding and flow of sheared colloidal glasses

    International Nuclear Information System (INIS)

    Petekidis, G; Vlassopoulos, D; Pusey, P N

    2004-01-01

    We have studied some of the rheological properties of suspensions of hard-sphere colloids with particular reference to behaviour near the concentration of the glass transition. First we monitored the strain on the samples during and after a transient step stress. We find that, at all values of applied step stress, colloidal glasses show a rapid, apparently elastic, recovery of strain after the stress is removed. This recovery is found even in samples which have flowed significantly during stressing. We attribute this behaviour to 'cage elasticity', the recovery of the stress-induced distorted environment of any particle to a more isotropic state when the stress is removed. Second, we monitored the stress as the strain rate dot γ of flowing samples was slowly decreased. Suspensions which are glassy at rest show a stress which becomes independent of dot γ as dot γ →0. This limiting stress can be interpreted as the yield stress of the glass and agrees well both with the yield stress deduced from the step stress and recovery measurements and that predicted by a recent mode coupling theory of sheared suspensions. Thus, the behaviours under steady shearing and transient step stress both support the idea that colloidal glasses have a finite yield stress. We note however that the samples do exhibit a slow accumulation of strain due to creep at stresses below the yield stress

  12. Influence of irrigation and nitrogen fertilization on grain yield and some baking quality characteristics of spring wheat

    Directory of Open Access Journals (Sweden)

    Paavo Elonen

    1975-05-01

    Full Text Available In the years 1967—70 twelve irrigation experiments of spring wheat were carried out in southern Finland (60-62° N, 22-26° E. Sprinkler irrigation (2 X 30 mm increased the grain yields on an average by 1240±470kg/ha (from 2740 to 3980 kg or 45±17 %. The increases in yield were significant on clay soils (9 trials and loam (1 trial but insignificant on fines and (1 trial and mould (1 trial. Additional nitrogen fertilization (from 76 to 143kg/ha N increased the grain yields on an average by 350± 200 kg/ha or 11±6 %. The ripening of wheat was significantly promoted by irrigation in one year but slightly retarded in three years. Nitrogen fertilization slightly retarded ripening every year The falling number of grains tended to be slightly improved by irrigation (from 285 to 321, on an average, but in most trials irrigation and nitrogen fertilization had no significant influence on the falling number. Irrigation decreased the crude protein content of grains in all trials, on an average by 2.2 ± 0.7 %-units (from 16.3 to 14.1%. This unfavourable effect was, however, avoided with additional nitrogen which increased the protein content by 1.9±0.4%-units (from 14,3 to 16.2 %. The effects of irrigation and nitrogen fertilization on those characteristics of wheat that are correlated with protein, were similar to the effects on the protein content. Thus, irrigation decreased the zeleny value (from 64 to 53 ml, cold viscosity (from 214 to 114 seconds, water absorption (from 66.5 to 64.9 % and the valorimeter value (from 68 to 60, while these characteristics were improved by nitrogen fertilization. Irrigation did not decrease the Pelshenke value but increased significantly the ratio of the Pelshenke value/protein content (from 5,1 to 6.1. This indicates that the quality of protein was improved by irrigation, while the effect of nitrogen fertilization was the reverse. In fact, irrigation and additional nitrogen fertilization affected the quantity and

  13. High quantum yield ZnO quantum dots synthesizing via an ultrasonication microreactor method.

    Science.gov (United States)

    Yang, Weimin; Yang, Huafang; Ding, Wenhao; Zhang, Bing; Zhang, Le; Wang, Lixi; Yu, Mingxun; Zhang, Qitu

    2016-11-01

    Green emission ZnO quantum dots were synthesized by an ultrasonic microreactor. Ultrasonic radiation brought bubbles through ultrasonic cavitation. These bubbles built microreactor inside the microreactor. The photoluminescence properties of ZnO quantum dots synthesized with different flow rate, ultrasonic power and temperature were discussed. Flow rate, ultrasonic power and temperature would influence the type and quantity of defects in ZnO quantum dots. The sizes of ZnO quantum dots would be controlled by those conditions as well. Flow rate affected the reaction time. With the increasing of flow rate, the sizes of ZnO quantum dots decreased and the quantum yields first increased then decreased. Ultrasonic power changed the ultrasonic cavitation intensity, which affected the reaction energy and the separation of the solution. With the increasing of ultrasonic power, sizes of ZnO quantum dots first decreased then increased, while the quantum yields kept increasing. The effect of ultrasonic temperature on the photoluminescence properties of ZnO quantum dots was influenced by the flow rate. Different flow rate related to opposite changing trend. Moreover, the quantum yields of ZnO QDs synthesized by ultrasonic microreactor could reach 64.7%, which is higher than those synthesized only under ultrasonic radiation or only by microreactor. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Assessment of genetic diversity in tomato for fruit morphology, composition and yield

    International Nuclear Information System (INIS)

    Zaif, K.; Amjad, M.; Saeed, A.

    2016-01-01

    Postharvest losses are of great concern in vegetable crops, including tomato, due to their perishable nature. Damage to tomato fruit during transportation is related to its shape besides other factors. Therefore, this study was conducted to assess genetic diversity in the available tomato germplasm (35 genotypes) for fruit morphology, biochemical composition and yield. Considerable variation was observed for all studied traits except number of locules per fruit, TSS and reducing sugars, for which very low range was recorded. While, moderate level of variation existed for stem-end blockiness, blossom-end blockiness and elongated shape which suggested that fruit of most of the varieties could belong to more than one category of fruit shape. Fruit length and diameter had significantly positive correlation with heart shape of tomato, while later was also correlated with blossom-end-blockiness. Heart shape of tomato fruit was also correlated with stem-end blockiness. Yield showed significantly positive correlation with number of inflorescence per plant. Principal component analysis (PCA) revealed PC-I to PC-VI had Eigen values >1, which contributed 73.86% of total variability for different traits. The highest factor loading values for blossom-end-blockiness, stem-end-blockiness, heart shape and elongated shape was recorded in PC-6, PC-4, PC-6 and PC-2, respectively. Thirty five genotypes were grouped into three clusters. Higher yield and stem-end-blockiness was observed in genotypes from cluster II, while higher values for blossom-end-blockiness, heart shape and elongated shape were noticed in cluster I followed by cluster III. So, it can be assumed that genotypes in cluster II showed higher yield and also possessed blocky fruit, a desirable character for transportation and processing purpose. Moreover, it is suggested that genotypes of cluster I and cluster II can be crossed to find heterosis for yield and fruit shape related traits. (author)

  15. Estimation of rice yield affected by drought and relation between rice yield and TVDI

    Science.gov (United States)

    Hongo, C.; Tamura, E.; Sigit, G.

    2016-12-01

    Impact of climate change is not only seen on food production but also on food security and sustainable development of society. Adaptation to climate change is a pressing issue throughout the world to reduce the risks along with the plans and strategies for food security and sustainable development. As a key adaptation to the climate change, agricultural insurance is expected to play an important role in stabilizing agricultural production through compensating the losses caused by the climate change. As the adaptation, the Government of Indonesia has launched agricultural insurance program for damage of rice by drought, flood and pest and disease. The Government started a pilot project in 2013 and this year the pilot project has been extended to 22 provinces. Having the above as background, we conducted research on development of new damage assessment method for rice using remote sensing data which could be used for evaluation of damage ratio caused by drought in West Java, Indonesia. For assessment of the damage ratio, estimation of rice yield is a key. As the result of our study, rice yield affected by drought in dry season could be estimated at level of 1 % significance using SPOT 7 data taken in 2015, and the validation result was 0.8t/ha. Then, the decrease ratio in rice yield about each individual paddy field was calculated using data of the estimated result and the average yield of the past 10 years. In addition, TVDI (Temperature Vegetation Dryness Index) which was calculated from Landsat8 data in heading season indicated the dryness in low yield area. The result suggests that rice yield was affected by irrigation water shortage around heading season as a result of the decreased precipitation by El Nino. Through our study, it becomes clear that the utilization of remote sensing data can be promising for assessment of the damage ratio of rice production precisely, quickly and quantitatively, and also it can be incorporated into the insurance procedures.

  16. The Effect of Chemical, Biological and Organic Nutritional Treatments on Sunflowers Yield and Yield Components under the Influence of Water Deficit Stress

    Directory of Open Access Journals (Sweden)

    fatemeh soleymani

    2016-07-01

    Azospirilium lipoferum was impregnated with seeds. Vermicompost was mixed with the soil before planting based on the recommendation of the producer company (15 t.ha-1. After determining evapotranspiration of the reference plant (ET0 by FAO- Penman-Monteith method and crop coefficients (Kc in different stages of crop growth, plant water requirement was determined (Allen et al., 1998. Finally, the irrigation water volume was estimated according to the effective rainfall, irrigation efficiency (60% and 45% depletion of soil moisture in the root zone (Doorenbos & Kassam, 1979. Results and discussion Water deficit stress and nutrient treatments significantly affected all measured traits except the harvest index. Water deficit stress significantly reduced head diameter by 24% in comparison with optimum irrigation. The maximum diameter (17.03 cm was obtained in vermicompost treatment. One thousand seed weight of sunflower under optimum irrigation was 1.3 times as much as water deficit treatment. Combined treatment of vermicompost and half of recommended chemical fertilizer yielded maximum 1000- seed weight (56.67 g. Under optimum irrigation, the highest weight of the head was achieved from 100% chemical fertilizer application, while under water stress, maximum head weight (830.67 g was obtained in vermicompost treatment and the minimum value (485.33 g was obtained from chemical fertilizer + vermicompost + phospho nitro kara. In both irrigation levels, the highest biological yield was obtained from full application of chemical fertilizer, but this treatment in stress condition did not have significant difference with combined application of vermicompost and half of chemical fertilizer, vermicompost and 50% of chemical fertilizer. 100% recommended chemical fertilizer in optimum irrigation, had a maximum grain yield (693.67 g.m-2. Organic fertilizers by increasing soil organic matter, improving soil chemical properties such as pH and CEC, increasing the activity of microorganisms and

  17. The extended-domain-eigenfunction method for solving elliptic boundary value problems with annular domains

    Energy Technology Data Exchange (ETDEWEB)

    Aarao, J; Bradshaw-Hajek, B H; Miklavcic, S J; Ward, D A, E-mail: Stan.Miklavcic@unisa.edu.a [School of Mathematics and Statistics, University of South Australia, Mawson Lakes, SA 5095 (Australia)

    2010-05-07

    Standard analytical solutions to elliptic boundary value problems on asymmetric domains are rarely, if ever, obtainable. In this paper, we propose a solution technique wherein we embed the original domain into one with simple boundaries where the classical eigenfunction solution approach can be used. The solution in the larger domain, when restricted to the original domain, is then the solution of the original boundary value problem. We call this the extended-domain-eigenfunction method. To illustrate the method's strength and scope, we apply it to Laplace's equation on an annular-like domain.

  18. Cigarette nicotine yields and nicotine intake among Japanese male workers

    OpenAIRE

    Ueda, K; Kawachi, I; Nakamura, M; Nogami, H; Shirokawa, N; Masui, S; Okayama, A; Oshima, A

    2002-01-01

    Objectives: To analyse brand nicotine yield including "ultra low" brands (that is, cigarettes yielding ≤ 0.1 mg of nicotine by Federal Trade Commission (FTC) methods) in relation to nicotine intake (urinary nicotine, cotinine and trans-3'-hydroxycotinine) among 246 Japanese male smokers.

  19. Three metonyms for Critical Practice: Jig, Foam and Yield

    Directory of Open Access Journals (Sweden)

    Marsha Bradfield

    2017-08-01

    Full Text Available This tripartite account reflects on the patainstiutional approach of Critical Practice Research Cluster (London, UK, which is comprised of artists, designers, curators, researchers and others hosted by Chelsea College of Arts. We consider the cluster’s self-organisation by way of three metonyms, exploring the significance of jig, foam and yield. We reflect on this as longstanding members of Critical Practice (CP and three of many co-convenors of #TransActing: A Market of Values (July 2015. This bustling flea market-like event comprised ‘stalls’ that featured artists, designers, theorists, philosophers, civil-society groups, ecologists, enthusiasts, experts, activists and others. Together with a milling crowd, stallholders creatively explored existing structures of evaluation and actively produced new ones. The jigs arose through the intersection of various vectors, principally the need to make ‘stalls’ to host the market, they evolved into the physical protocols which produced assemblies from disparate individuals, materials and coordinated their interactions into collaborative communities. Jigs are relational machines. ‘Foam’ is a rereading of Peter Sloterdijk’s ‘thought image’ which calls for an attention when describing contemporary social space. If jigs produce specific temporary institutions, how are these institutions composed? CP’s form of organisation encourages decisions, processes and production to be accessible and transparent, yet, a ‘foamy’ approach recognises that every act of inclusion, even within open institutions, necessitates exclusion elsewhere. The final section of this account explores the Critical Practice market’s value against the rampant corporatization of life as we know it. ‘Yield’ features here as metonymic of the give-and-take distinguishing CP’s mixed economy. It is through giving way (yielding to the demands and possibilities of co-authorship that the bounty of this way of working

  20. Accuracy Evaluation of the Unified P-Value from Combining Correlated P-Values

    Science.gov (United States)

    Alves, Gelio; Yu, Yi-Kuo

    2014-01-01

    Meta-analysis methods that combine -values into a single unified -value are frequently employed to improve confidence in hypothesis testing. An assumption made by most meta-analysis methods is that the -values to be combined are independent, which may not always be true. To investigate the accuracy of the unified -value from combining correlated -values, we have evaluated a family of statistical methods that combine: independent, weighted independent, correlated, and weighted correlated -values. Statistical accuracy evaluation by combining simulated correlated -values showed that correlation among -values can have a significant effect on the accuracy of the combined -value obtained. Among the statistical methods evaluated those that weight -values compute more accurate combined -values than those that do not. Also, statistical methods that utilize the correlation information have the best performance, producing significantly more accurate combined -values. In our study we have demonstrated that statistical methods that combine -values based on the assumption of independence can produce inaccurate -values when combining correlated -values, even when the -values are only weakly correlated. Therefore, to prevent from drawing false conclusions during hypothesis testing, our study advises caution be used when interpreting the -value obtained from combining -values of unknown correlation. However, when the correlation information is available, the weighting-capable statistical method, first introduced by Brown and recently modified by Hou, seems to perform the best amongst the methods investigated. PMID:24663491