Proximity Works and carry-over method without ground improvement in the construction works by shield method

Energy Technology Data Exchange (ETDEWEB)

Watanabe, Jun; Taki, Hideharu; Teraoka, Yoshiaki [Chubu Electric Power Co., Inc., Nagoya (Japan)

1989-06-01

Chubu Electric Power Co. is promoting to introduce ultrahigh-voltage transmission line into Nagoya City in order to supply electric power to the central area of the city. As a part of this project, the company constructed the tunnel extending 1400m long in the central area of Nagoya City by shield method. In the area around the route of this tunnel, high buildings for residence stand close together, the traffic is heavy, and also four railway lines cross over the tunnel. The important points of this construction are curved surface works of the tunnel at the main intersections, crosscutting works at the major trunk railway lines, and shield carry-over method. The finished inside diameter of the tunnel is 3.6m and it is protected by the primary lining of 175mm in thickness and by the secondary one of 200mm in thickness. As the construction is performed at the intersections where traffic is heavy, or required curved surface works, it must be carried out without the process of ground improvement such as chemical injection. Therefore, excavation was performed through high strength stratum, utilizing the strength of soil itself. At the portion where the tunnel runs across main railway line, it was taken in account that high strength stratum should remain as cover rock, and excavation was performed beneath the rock. At the end portion of shield, soil pile column with H-formed steel and steel bulk head were used as means of landslide protection. Thus, the ease operation and economic execution of works were realized. 1 ref., 14 figs., 2 tabs.

Effectiveness of disinfection with alcohol 70% (w/v of contaminated surfaces not previously cleaned

Directory of Open Access Journals (Sweden)

Maurício Uchikawa Graziano

2013-04-01

Full Text Available OBJECTIVE: To evaluate the disinfectant effectiveness of alcohol 70% (w/v using friction, without previous cleaning, on work surfaces, as a concurrent disinfecting procedure in Health Services. METHOD: An experimental, randomized and single-blinded laboratory study was undertaken. The samples were enamelled surfaces, intentionally contaminated with Serratia marcescens microorganisms ATCC 14756 106 CFU/mL with 10% of human saliva added, and were submitted to the procedure of disinfection WITHOUT previous cleaning. The results were compared to disinfection preceded by cleaning. RESULTS: There was a reduction of six logarithms of the initial microbial population, equal in the groups WITH and WITHOUT previous cleaning (p=0.440 and a residual microbial load ≤ 102 CFU. CONCLUSION: The research demonstrated the acceptability of the practice evaluated, bringing an important response to the area of health, in particular to Nursing, which most undertakes procedures of concurrent cleaning /disinfecting of these work surfaces.

Effectiveness of disinfection with alcohol 70% (w/v of contaminated surfaces not previously cleaned

Directory of Open Access Journals (Sweden)

Maurício Uchikawa Graziano

Full Text Available OBJECTIVE: To evaluate the disinfectant effectiveness of alcohol 70% (w/v using friction, without previous cleaning, on work surfaces, as a concurrent disinfecting procedure in Health Services. METHOD: An experimental, randomized and single-blinded laboratory study was undertaken. The samples were enamelled surfaces, intentionally contaminated with Serratia marcescens microorganisms ATCC 14756 106 CFU/mL with 10% of human saliva added, and were submitted to the procedure of disinfection WITHOUT previous cleaning. The results were compared to disinfection preceded by cleaning. RESULTS: There was a reduction of six logarithms of the initial microbial population, equal in the groups WITH and WITHOUT previous cleaning (p=0.440 and a residual microbial load ≤ 102 CFU. CONCLUSION: The research demonstrated the acceptability of the practice evaluated, bringing an important response to the area of health, in particular to Nursing, which most undertakes procedures of concurrent cleaning /disinfecting of these work surfaces.

Lean approach in knowledge work

Directory of Open Access Journals (Sweden)

Hanna Kropsu-Vehkapera

2018-05-01

Full Text Available Purpose: Knowledge work productivity is a key area of improvement for many organisations. Lean approach is a sustainable way to achieve operational excellence and can be applied in many areas. The purpose of this novel study is to examine the potential of using lean approach for improving knowledge work practices. Design/methodology/approach: A systematic literature review has been carried out to study how lean approach is realised in knowledge work. The research is conceptual in nature and draws upon earlier research findings. Findings: This study shows that lean studies’ in knowledge work is an emerging research area. This study documents the methods and practices implemented in knowledge work to date, and presents a knowledge work continuum, which is an essential framework for effective lean approach deployment and to frame future research focus in knowledge work productivity. Research limitations/implications: This study structures the concept of knowledge work and outlines a concrete concept derived from earlier literature. The study summarises the literature on lean in knowledge work and highlights, which methods are used. More research is needed to understand how lean can be implemented in complex knowledge work environment and not only on the repetitive knowledge work. The limitations of this research are due to the limited availability of previous research. Practical implications: To analyse the nature of knowledge work, we implicate the areas where lean methods especially apply to improving knowledge work productivity. When applying lean in knowledge work context the focus should be using the people better and improving information flow. Originality/value: This study focuses on adapting lean methods into a knowledge work context and summarises earlier research done in this field. The study discusses the potential to improve knowledge work productivity by implementing lean methods and presents a unique knowledge work continuum to

[Estimating non work-related sickness leave absences related to a previous occupational injury in Catalonia (Spain)].

Science.gov (United States)

Molinero-Ruiz, Emilia; Navarro, Albert; Moriña, David; Albertí-Casas, Constança; Jardí-Lliberia, Josefina; de Montserrat-Nonó, Jaume

2015-01-01

To estimate the frequency of non-work sickness absence (ITcc) related to previous occupational injuries with (ATB) or without (ATSB) sick leave. Prospective longitudinal study. Workers with ATB or ATSB notified to the Occupational Accident Registry of Catalonia were selected in the last term of 2009. They were followed-up for six months after returning to work (ATB) or after the accident (ATSB), by sex and occupation. Official labor and health authority registries were used as information sources. An "injury-associated ITcc" was defined when the sick leave occurred in the following six months and within the same diagnosis group. The absolute and relative frequency were calculated according to time elapsed and its duration (cumulated days, measures of central trend and dispersion), by diagnosis group or affected body area, as compared to all of Catalonia. 2,9%of ATB (n=627) had an injury-associated ITcc, with differences by diagnosis, sex and occupation; this was also the case for 2,1% of ATSB (n=496).With the same diagnosis, duration of ITcc was longer among those who had an associated injury, and with respect to all of Catalonia. Some of the under-reporting of occupational pathology corresponds to episodes initially recognized as being work-related. Duration of sickness absence depends not only on diagnosis and clinical course, but also on criteria established by the entities managing the case. This could imply that more complicated injuries are referred to the national health system, resulting in personal, legal, healthcare and economic cost consequences for all involved stakeholders. Copyright belongs to the Societat Catalana de Salut Laboral.

Methods for monitoring work-life balance in a digital world

OpenAIRE

Chong, Ming Ki; Whittle, Jon; Rashid, Umar; Ang, Chee Siang; Whiting, Rebecca; Roby, Helen; Chamakiotis, Petros; Symon, Gillian

2014-01-01

Digital technologies - smart phones, email, social networking, etc. - are fundamentally changing our relationship with work. Digital technologies enable us to be always connected. However, the question remains as to how digital technologies affect our work-life balance. In this position paper, we report on some methods we are using to study how to continuously monitor and observe work-life balance, and discuss the advantages/disadvantages of these methods. Work-life balance is a relatively un...

Capacity for work researching method in animal experiment

International Nuclear Information System (INIS)

Pul'nov, V.N.; Mashneva, N.I.

1978-01-01

The existing methods of examining the work capacity of animals are discussed with reference to extrapolation of animal data to man. A modified procedure for measuring maximal physical strength is proposed, whereby static endurance of animals at a given exercise rate can be measured. For an integrated evaluation of work capacity, a formula of absolute work capacity is suggested. The proposed procedure may be used to study the working capacity of animals exposed to unfavorable factors of radiation or nonradiation nature

The Security Council's Methods of Work: The Borderlines of Legality

DEFF Research Database (Denmark)

Cullen, Miriam

2015-01-01

The first section outlines the Security Council’s rules of procedure (or lack thereof) and working methods. Examples are used to illustrate that the Council's methods of work have, paradoxically, become increasingly opaque at the same time as its direct involvement in international justice has...... escalated. The paper concludes by positing that a lack of procedural fairness in the Council’s methods of work at least undermines the justice imperative that the Council so espouses and at most violates an ancillary legal obligation....

THE INFLUENCE OF THE ASSESSMENT MODEL AND METHOD TOWARD THE SCIENCE LEARNING ACHIEVEMENT BY CONTROLLING THE STUDENTS? PREVIOUS KNOWLEDGE OF MATHEMATICS.

OpenAIRE

Adam rumbalifar; I. g. n. Agung; Burhanuddin tola.

2018-01-01

This research aims to study the influence of the assessment model and method toward the science learning achievement by controlling the students? previous knowledge of mathematics. This study was conducted at SMP East Seram district with the population of 295 students. This study applied a quasi-experimental method with 2 X 2 factorial design using the ANCOVA model. The findings after controlling the students\\' previous knowledge of mathematics show that the science learning achievement of th...

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

Directory of Open Access Journals (Sweden)

Irene Niks

2018-02-01

Full Text Available Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care.

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method.

Science.gov (United States)

Niks, Irene; de Jonge, Jan; Gevers, Josette; Houtman, Irene

2018-02-13

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care.

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

Science.gov (United States)

Niks, Irene; Gevers, Josette

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and implementation of tailored work stress interventions, the so-called DISCovery method. This method aims at improving employee health, well-being, and performance by optimizing the balance between job demands, job resources, and recovery from work. The aim of the study is to quantitatively assess the effectiveness of the DISCovery method in hospital care. Specifically, we used a three-wave longitudinal, quasi-experimental multiple-case study approach with intervention and comparison groups in health care work. Positive changes were found for members of the intervention groups, relative to members of the corresponding comparison groups, with respect to targeted work-related characteristics and targeted health, well-being, and performance outcomes. Overall, results lend support for the effectiveness of the DISCovery method in hospital care. PMID:29438350

Haemodialysis work environment contributors to job satisfaction and stress: a sequential mixed methods study.

Science.gov (United States)

Hayes, Bronwyn; Bonner, Ann; Douglas, Clint

2015-01-01

Haemodialysis nurses form long term relationships with patients in a technologically complex work environment. Previous studies have highlighted that haemodialysis nurses face stressors related to the nature of their work and also their work environments leading to reported high levels of burnout. Using Kanters (1997) Structural Empowerment Theory as a guiding framework, the aim of this study was to explore the factors contributing to satisfaction with the work environment, job satisfaction, job stress and burnout in haemodialysis nurses. Using a sequential mixed-methods design, the first phase involved an on-line survey comprising demographic and work characteristics, Brisbane Practice Environment Measure (B-PEM), Index of Work Satisfaction (IWS), Nursing Stress Scale (NSS) and the Maslach Burnout Inventory (MBI). The second phase involved conducting eight semi-structured interviews with data thematically analyzed. From the 417 nurses surveyed the majority were female (90.9 %), aged over 41 years of age (74.3 %), and 47.4 % had worked in haemodialysis for more than 10 years. Overall the work environment was perceived positively and there was a moderate level of job satisfaction. However levels of stress and emotional exhaustion (burnout) were high. Two themes, ability to care and feeling successful as a nurse, provided clarity to the level of job satisfaction found in phase 1. While two further themes, patients as quasi-family and intense working teams, explained why working as a haemodialysis nurse was both satisfying and stressful. Nurse managers can use these results to identify issues being experienced by haemodialysis nurses working in the unit they are supervising.

Systems and methods for producing low work function electrodes

Science.gov (United States)

Kippelen, Bernard; Fuentes-Hernandez, Canek; Zhou, Yinhua; Kahn, Antoine; Meyer, Jens; Shim, Jae Won; Marder, Seth R.

2015-07-07

According to an exemplary embodiment of the invention, systems and methods are provided for producing low work function electrodes. According to an exemplary embodiment, a method is provided for reducing a work function of an electrode. The method includes applying, to at least a portion of the electrode, a solution comprising a Lewis basic oligomer or polymer; and based at least in part on applying the solution, forming an ultra-thin layer on a surface of the electrode, wherein the ultra-thin layer reduces the work function associated with the electrode by greater than 0.5 eV. According to another exemplary embodiment of the invention, a device is provided. The device includes a semiconductor; at least one electrode disposed adjacent to the semiconductor and configured to transport electrons in or out of the semiconductor.

Feature binding and attention in working memory: a resolution of previous contradictory findings.

Science.gov (United States)

Allen, Richard J; Hitch, Graham J; Mate, Judit; Baddeley, Alan D

2012-01-01

We aimed to resolve an apparent contradiction between previous experiments from different laboratories, using dual-task methodology to compare effects of a concurrent executive load on immediate recognition memory for colours or shapes of items or their colour-shape combinations. Results of two experiments confirmed previous evidence that an irrelevant attentional load interferes equally with memory for features and memory for feature bindings. Detailed analyses suggested that previous contradictory evidence arose from limitations in the way recognition memory was measured. The present findings are inconsistent with an earlier suggestion that feature binding takes place within a multimodal episodic buffer Baddeley, ( 2000 ) and support a subsequent account in which binding takes place automatically prior to information entering the episodic buffer Baddeley, Allen, & Hitch, ( 2011 ). Methodologically, the results suggest that different measures of recognition memory performance (A', d', corrected recognition) give a converging picture of main effects, but are less consistent in detecting interactions. We suggest that this limitation on the reliability of measuring recognition should be taken into account in future research so as to avoid problems of replication that turn out to be more apparent than real.

Basic thinking patterns and working methods for multiple DFX

DEFF Research Database (Denmark)

Andreasen, Mogens Myrup; Mortensen, Niels Henrik

1997-01-01

This paper attempts to describe the theory and methodologies behind DFX and linking multiple DFX's together. The contribution is an articulation of basic thinking patterns and description of some working methods for handling multiple DFX.......This paper attempts to describe the theory and methodologies behind DFX and linking multiple DFX's together. The contribution is an articulation of basic thinking patterns and description of some working methods for handling multiple DFX....

Long Working Hours in Korea: Based on the 2014 Korean Working Conditions Survey

OpenAIRE

Park, Jungsun; Kim, Yangho; Han, Boyoung

2017-01-01

Background: Long working hours adversely affect worker safety and health. In 2004, Korea passed legislation that limited the work week to 40 hours, in an effort to improve quality-of-life and increase business competitiveness. This regulation was implemented in stages, first for large businesses and then for small businesses, from 2004 to 2011. We previously reported that average weekly working hours decreased from 2006 to 2010, based on the Korean Working Conditions Survey. Methods: In the p...

The Work Compatibility Improvement Framework: an integrated perspective of the human-at-work system.

Science.gov (United States)

Genaidy, Ash; Salem, Sam; Karwowski, Waldemar; Paez, Omar; Tuncel, Setenay

2007-01-15

The industrial revolution demonstrated the limitations of a pure mechanistic approach towards work design. Human work is now seen as a complex entity that involves different scientific branches and blurs the line between mental and physical activities. Job design has been a traditional concern of applied psychology, which has provided insight into the interaction between the individual and the work environment. The goal of this paper is to introduce the human-at-work system as a holistic approach to organizational design. It postulates that the well-being of workers and work outcomes are issues that need to be addressed jointly, moving beyond traditional concepts of job satisfaction and work stress. The work compatibility model (WCM) is introduced as an engineering approach that seeks to integrate previous constructs of job and organizational design. The WCM seeks a balance between energy expenditure and replenishment. The implementation of the WCM in industrial settings is described within the context of the Work Compatibility Improvement Framework. A sample review of six models (motivation-hygiene theory; job characteristics theory; person-environment fit; demand-control model; and balance theory) provides the foundation for the interaction between the individual and the work environment. A review of three workload assessment methods (position analysis questionnaire, job task analysis and NASA task load index) gives an example of the foundation for the taxonomy of work environment domains. Previous models have sought to identify a balance state for the human-at-work system. They differentiated between the objective and subjective effects of the environment and the worker. An imbalance between the person and the environment has been proven to increase health risks. The WCM works with a taxonomy of 12 work domains classified in terms of the direct (acting) or indirect (experienced) effect on the worker. In terms of measurement, two quantitative methods are proposed

Models and methods for hot spot safety work

DEFF Research Database (Denmark)

Vistisen, Dorte

2002-01-01

Despite the fact that millions DKK each year are spent on improving roadsafety in Denmark, funds for traffic safety are limited. It is therefore vital to spend the resources as effectively as possible. This thesis is concerned with the area of traffic safety denoted "hot spot safety work", which...... is the task of improving road safety through alterations of the geometrical and environmental characteristics of the existing road network. The presently applied models and methods in hot spot safety work on the Danish road network were developed about two decades ago, when data was more limited and software...... and statistical methods less developed. The purpose of this thesis is to contribute to improving "State of the art" in Denmark. Basis for the systematic hot spot safety work are the models describing the variation in accident counts on the road network. In the thesis hierarchical models disaggregated on time...

Proposal for an Evaluation Method for the Performance of Work Procedures.

Science.gov (United States)

Mohammed, Mouda; Mébarek, Djebabra; Wafa, Boulagouas; Makhlouf, Chati

2016-12-01

Noncompliance of operators with work procedures is a recurrent problem. This human behavior has been said to be situational and studied by many different approaches (ergonomic and others), which consider the noncompliance with work procedures to be obvious and seek to analyze its causes as well as consequences. The object of the proposed method is to solve this problem by focusing on the performance of work procedures and ensuring improved performance on a continuous basis. This study has multiple results: (1) assessment of the work procedures' performance by a multicriteria approach; (2) the use of a continuous improvement approach as a framework for the sustainability of the assessment method of work procedures' performance; and (3) adaptation of the Stop-Card as a facilitator support for continuous improvement of work procedures. The proposed method emphasizes to put in value the inputs of continuous improvement of the work procedures in relation with the conventional approaches which adopt the obvious evidence of the noncompliance to the working procedures and seek to analyze the cause-effect relationships related to this unacceptable phenomenon, especially in strategic industry.

The experimental field work as practical learning method

Directory of Open Access Journals (Sweden)

Nicolás Fernández Losa

2014-11-01

Full Text Available This paper describes a teaching experience about experimental field work as practical learning method implemented in the subject of Organizational Behaviour. With this teaching experience we pretend to change the practical training, as well as in its evaluation process, in order to favour the development of transversal skills of students. For this purpose, the use of a practice plan, tackled through an experimental field work and carried out with the collaboration of a business organization within a work team (as organic unity of learning, arises as an alternative to the traditional method of practical teachings and allows the approach of business reality into the classroom, as well as actively promote the use of transversal skills. In particular, we develop the experience in three phases. Initially, the students, after forming a working group and define a field work project, should get the collaboration of a nearby business organization in which to obtain data on one or more functional areas of organizational behaviour. Subsequently, students carry out the field work with the realization of the scheduled visits and elaboration of a memory to establish a diagnosis of the strategy followed by the company in these functional areas in order to propose and justify alternative actions that improve existing ones. Finally, teachers assess the different field work memories and their public presentations according to evaluation rubrics, which try to objectify and unify to the maximum the evaluation criteria and serve to guide the learning process of students. The results of implementation of this teaching experience, measured through a Likert questionnaire, are very satisfactory for students.

Test Method for Rheological Behavior of Mortar for Building Work

Directory of Open Access Journals (Sweden)

Korobko Bogdan

2017-09-01

Full Text Available This paper offers a test method for rheological behavior of mortars with different mobility and different composition, which are used for execution of construction work. This method is based on investigation of the interaction between the valve ball and the mortar under study and allows quick defining of experimental variables for any composition of building mortars. Certain rheological behavior will permit to calculate the design parameters of machines for specific conditions of work performance – mixing (pre-operation, pressure generation, pumping to the work site, workpiece surfacing.

Modeling complex work systems - method meets reality

NARCIS (Netherlands)

van der Veer, Gerrit C.; Hoeve, Machteld; Lenting, Bert

1996-01-01

Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the

Laparoscopy After Previous Laparotomy

Directory of Open Access Journals (Sweden)

Zulfo Godinjak

2006-11-01

Full Text Available Following the abdominal surgery, extensive adhesions often occur and they can cause difficulties during laparoscopic operations. However, previous laparotomy is not considered to be a contraindication for laparoscopy. The aim of this study is to present that an insertion of Veres needle in the region of umbilicus is a safe method for creating a pneumoperitoneum for laparoscopic operations after previous laparotomy. In the last three years, we have performed 144 laparoscopic operations in patients that previously underwent one or two laparotomies. Pathology of digestive system, genital organs, Cesarean Section or abdominal war injuries were the most common causes of previouslaparotomy. During those operations or during entering into abdominal cavity we have not experienced any complications, while in 7 patients we performed conversion to laparotomy following the diagnostic laparoscopy. In all patients an insertion of Veres needle and trocar insertion in the umbilical region was performed, namely a technique of closed laparoscopy. Not even in one patient adhesions in the region of umbilicus were found, and no abdominal organs were injured.

Work system innovation: Designing improvement methods for generative capability

DEFF Research Database (Denmark)

Hansen, David; Møller, Niels

2013-01-01

This paper explores how a work system’s capability for improvement is influenced by its improvement methods. Based on explorative case study at a Lean manufacturing facility, the methods problem solving and Appreciative Inquiry were compared through in-depth qualitative studies over a 12-month...

Methods of sampling airborne fungi in working environments of waste treatment facilities.

Science.gov (United States)

Černá, Kristýna; Wittlingerová, Zdeňka; Zimová, Magdaléna; Janovský, Zdeněk

2016-01-01

The objective of the present study was to evaluate and compare the efficiency of a filter based sampling method and a high volume sampling method for sampling airborne culturable fungi present in waste sorting facilities. Membrane filters method was compared with surface air system method. The selected sampling methods were modified and tested in 2 plastic waste sorting facilities. The total number of colony-forming units (CFU)/m3 of airborne fungi was dependent on the type of sampling device, on the time of sampling, which was carried out every hour from the beginning of the work shift, and on the type of cultivation medium (p airborne fungi ranged 2×102-1.7×106 CFU/m3 when using the membrane filters (MF) method, and 3×102-6.4×104 CFU/m3 when using the surface air system (SAS) method. Both methods showed comparable sensitivity to the fluctuations of the concentrations of airborne fungi during the work shifts. The SAS method is adequate for a fast indicative determination of concentration of airborne fungi. The MF method is suitable for thorough assessment of working environment contamination by airborne fungi. Therefore we recommend the MF method for the implementation of a uniform standard methodology of airborne fungi sampling in working environments of waste treatment facilities. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Writing a Mixed Methods Report in Social Work Research

Science.gov (United States)

Bronstein, Laura R.; Kovacs, Pamela J.

2013-01-01

This article briefly chronicles the development of mixed methods research and its use in social work. We then move onto a discussion of terms and designs, reasons for (and for not) using mixed methods. Drawing upon exemplars, we address how to write up a mixed methods study when (1) the sample is single; single for one part, with a subset for the…

[A brief history of resuscitation - the influence of previous experience on modern techniques and methods].

Science.gov (United States)

Kucmin, Tomasz; Płowaś-Goral, Małgorzata; Nogalski, Adam

2015-02-01

Cardiopulmonary resuscitation (CPR) is relatively novel branch of medical science, however first descriptions of mouth-to-mouth ventilation are to be found in the Bible and literature is full of descriptions of different resuscitation methods - from flagellation and ventilation with bellows through hanging the victims upside down and compressing the chest in order to stimulate ventilation to rectal fumigation with tobacco smoke. The modern history of CPR starts with Kouwenhoven et al. who in 1960 published a paper regarding heart massage through chest compressions. Shortly after that in 1961Peter Safar presented a paradigm promoting opening the airway, performing rescue breaths and chest compressions. First CPR guidelines were published in 1966. Since that time guidelines were modified and improved numerously by two leading world expert organizations ERC (European Resuscitation Council) and AHA (American Heart Association) and published in a new version every 5 years. Currently 2010 guidelines should be obliged. In this paper authors made an attempt to present history of development of resuscitation techniques and methods and assess the influence of previous lifesaving methods on nowadays technologies, equipment and guidelines which allow to help those women and men whose life is in danger due to sudden cardiac arrest. © 2015 MEDPRESS.

Reference Values for Spirometry Derived Using Lambda, Mu, Sigma (LMS) Method in Korean Adults: in Comparison with Previous References.

Science.gov (United States)

Jo, Bum Seak; Myong, Jun Pyo; Rhee, Chin Kook; Yoon, Hyoung Kyu; Koo, Jung Wan; Kim, Hyoung Ryoul

2018-01-15

The present study aimed to update the prediction equations for spirometry and their lower limits of normal (LLN) by using the lambda, mu, sigma (LMS) method and to compare the outcomes with the values of previous spirometric reference equations. Spirometric data of 10,249 healthy non-smokers (8,776 females) were extracted from the fourth and fifth versions of the Korea National Health and Nutrition Examination Survey (KNHANES IV, 2007-2009; V, 2010-2012). Reference equations were derived using the LMS method which allows modeling skewness (lambda [L]), mean (mu [M]), and coefficient of variation (sigma [S]). The outcome equations were compared with previous reference values. Prediction equations were presented in the following form: predicted value = e{a + b × ln(height) + c × ln(age) + M - spline}. The new predicted values for spirometry and their LLN derived using the LMS method were shown to more accurately reflect transitions in pulmonary function in young adults than previous prediction equations derived using conventional regression analysis in 2013. There were partial discrepancies between the new reference values and the reference values from the Global Lung Function Initiative in 2012. The results should be interpreted with caution for young adults and elderly males, particularly in terms of the LLN for forced expiratory volume in one second/forced vital capacity in elderly males. Serial spirometry follow-up, together with correlations with other clinical findings, should be emphasized in evaluating the pulmonary function of individuals. Future studies are needed to improve the accuracy of reference data and to develop continuous reference values for spirometry across all ages. © 2018 The Korean Academy of Medical Sciences.

Determination of the Boltzmann constant with cylindrical acoustic gas thermometry: new and previous results combined

Science.gov (United States)

Feng, X. J.; Zhang, J. T.; Lin, H.; Gillis, K. A.; Mehl, J. B.; Moldover, M. R.; Zhang, K.; Duan, Y. N.

2017-10-01

We report a new determination of the Boltzmann constant k B using a cylindrical acoustic gas thermometer. We determined the length of the copper cavity from measurements of its microwave resonance frequencies. This contrasts with our previous work (Zhang et al 2011 Int. J. Thermophys. 32 1297, Lin et al 2013 Metrologia 50 417, Feng et al 2015 Metrologia 52 S343) that determined the length of a different cavity using two-color optical interferometry. In this new study, the half-widths of the acoustic resonances are closer to their theoretical values than in our previous work. Despite significant changes in resonator design and the way in which the cylinder length is determined, the value of k B is substantially unchanged. We combined this result with our four previous results to calculate a global weighted mean of our k B determinations. The calculation follows CODATA’s method (Mohr and Taylor 2000 Rev. Mod. Phys. 72 351) for obtaining the weighted mean value of k B that accounts for the correlations among the measured quantities in this work and in our four previous determinations of k B. The weighted mean {{\\boldsymbol{\\hat{k}}}{B}} is 1.380 6484(28)  ×  10-23 J K-1 with the relative standard uncertainty of 2.0  ×  10-6. The corresponding value of the universal gas constant is 8.314 459(17) J K-1 mol-1 with the relative standard uncertainty of 2.0  ×  10-6.

Long Working Hours in Korea: Based on the 2014 Korean Working Conditions Survey

Directory of Open Access Journals (Sweden)

Jungsun Park

2017-12-01

Full Text Available Background: Long working hours adversely affect worker safety and health. In 2004, Korea passed legislation that limited the work week to 40 hours, in an effort to improve quality-of-life and increase business competitiveness. This regulation was implemented in stages, first for large businesses and then for small businesses, from 2004 to 2011. We previously reported that average weekly working hours decreased from 2006 to 2010, based on the Korean Working Conditions Survey. Methods: In the present study, we examine whether average weekly working hours continued to decrease in 2014 based on the 2014 Korean Working Conditions Survey. Results: The results show that average weekly working hours among all groups of workers decreased in 2014 relative to previous years; however, self-employed individuals and employers (who are not covered by the new legislation in the specific service sectors worked > 60 h/wk in 2014. Conclusion: The Korean government should prohibit employees from working excessive hours and should also attempt to achieve social and public consensus regarding work time reduction to improve the safety, health, and quality-of-life of all citizens, including those who are employers and self-employed. Keywords: employee, employer, Korea, self-employed, working hours

A method for assessing work productivity and flexibility in livestock farms.

Science.gov (United States)

Hostiou, N; Dedieu, B

2012-05-01

Changes affecting livestock farming systems have made farm work a central concern for both the sector and for farmers themselves. Increased pressure on farms to be competitive and productive together with farmers' demand for greater autonomy, holidays or time to spend on private activities and the family converge to underline the two key dimensions of work - productivity and flexibility - required for the assessment of work organization. This paper proposes a method called the QuaeWork (QUAlification and Evaluation of Work in livestock farms) to assess work productivity and flexibility on a farm, and its use to identify how livestock management can contribute to work organization on dairy farms. The QuaeWork method was set up through an iterative process combining surveys conducted with farmers in two regions of France, discussions with different experts and literature review. The QuaeWork was applied on a sample of seven dairy farms in the southern Massif Central in France to identify patterns of how livestock management contributes to work organization. The QuaeWork was used to analyse work organization over the year through a systemic approach to the farm, integrating interactions between herd and land management, workforce composition, equipment facilities and combinations of activities through a characterization of 'who does what, when and for how long'. The criteria for assessing work productivity were work duration (routine work, seasonal work) and work efficiency (per livestock unit or hectare of utilized agricultural area). The criteria for assessing work flexibility were room for manoeuvre and adjustments to internal and external events. The three main patterns of livestock management practices to work organization were identified. In pattern-1, farmers used indoor stable feeding practices with delegated work, with moderate room for manoeuvre and efficiency. In pattern-3, farmers used simplified milking, reproduction and breeding practices to seasonalize

Effects of payment method on work control, work risk and work-related musculoskeletal health among sewing machine operators

Directory of Open Access Journals (Sweden)

R. Nawawi

2015-12-01

Full Text Available Effects of payment method on work control, work risk and work-related musculoskeletal health among sewing machine operators R. Nawawi1, B.M. Deros1*, D.D.I. Daruis2, A. Ramli3, R.M. Zein4 and L.H. Joseph3 1Dept. of Mechanical and Materials Engineering Faculty of Engineering & Built Environment Universiti Kebangsaan Malaysia, Malaysia *Email: hjbaba@ukm.edu.my 2Faculty of Engineering, Universiti Pertahanan Nasional Malaysia, Malaysia 3Department of Physiotherapy Faculty of Science, Lincoln University College, Malaysia 4Department of Consultation, Research & Development, National Institute of Occupational Safety and Health (NIOSH, Malaysia ABSTRACT This study aimed to identify payment method and its effects on work control, work risk and work-related musculoskeletal health among Malaysian sewing machine operators. The study sample comprised 337 sewing machine operators (male, n=122, female, n=215; aged between 18-54 years old; mean 30.74±8.44 from four different garment-making companies in Malaysia. They were being paid via time rate wages (n=246 and piece rate wages (n=91. Data was collected through Nordic Musculoskeletal Questionnaire and pen-and-paper assessment via Rapid Upper Limb Assessment (RULA. From the study, the piece rate wage group was found to take fewer breaks, had high work production demands, worked at a faster pace and experienced more exhaustion and pressure due to increasing work demands as compared to the time rate group. They were also observed working with higher physical exposure such as repetitive tasks, awkward static postures, awkward grips and hand movements, pulling, lifting and pushing as compared to those in the time rate wage group. The final RULA scores was also higher from the piece rate wage group (72.53% RULA score 7 which indicated higher work risks among them. The study found that the type of wage payment was significantly associated with work risks (p=0.036, df=1 and WRMSD at the shoulder, lower back

The Five Star Method: A Relational Dream Work Methodology

Science.gov (United States)

Sparrow, Gregory Scott; Thurston, Mark

2010-01-01

This article presents a systematic method of dream work called the Five Star Method. Based on cocreative dream theory, which views the dream as the product of the interaction between dreamer and dream, this creative intervention shifts the principal focus in dream analysis from the interpretation of static imagery to the analysis of the dreamer's…

A field method for monitoring thoron-daughter working level

International Nuclear Information System (INIS)

Khan, A.H.; Dhandayatham, R.; Raghavayya, M.; Nambiar, P.P.V.J.

1975-01-01

The concept of working level, generally used for radon daughters, has been extended to the daughter products of thoron. Accordingly, thorondaughter working level (TWL) has been defined as the alpha energy released from the ultimate decay of 100 pCi/1 each of the short-lived decay products of thoron. In order to facilitate the evaluation of inhalation hazard in thorium handling areas, a simple field method has been suggested to measure the thoron-daughter working level. A comparison of the potential alpha energies from radon-daughters and that from thoron-daughter is included. (K.B.)

37 CFR 211.6 - Methods of affixation and placement of mask work notice.

Science.gov (United States)

2010-07-01

... placement of mask work notice. 211.6 Section 211.6 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES MASK WORK PROTECTION § 211.6 Methods of affixation and placement of mask work notice. (a) General. (1) This section specifies methods of affixation and placement...

Nuclear thermal rocket clustering: 1, A summary of previous work and relevant issues

International Nuclear Information System (INIS)

Buksa, J.J.; Houts, M.G.

1991-01-01

A general review of the technical merits of nuclear thermal rocket clustering is presented. A summary of previous analyses performed during the Rover program is presented and used to assess clustering in the context of projected Space Exploration Initiative missions. A number of technical issues are discussed including cluster reliability, engine-out operation, neutronic coupling, shutdown core power generation, shutdown reactivity requirements, reactor kinetics, and radiation shielding. 7 refs., 3 figs., 2 tabs

A delicate balance? : a study of work-life conflicts, work-life enrichment, and worklife balance among management consultants in Norway

OpenAIRE

Nabong, Tristán; Trønnes, Hannah

2016-01-01

The purpose of this study is to identify the relationship among work-life balance, work-life enrichment, and work-life conflict by looking into the status, condition, and experiences of management consultants in Norway. The need to develop methods to achieve an optimal balance between employees’ productivity, work habits and personal life has sparked numerous studies investigating work-life balance in recent years. Because very few previous studies have dealt with work-life balance in the man...

An Investigation of Applications for Thermodynamic Work Potential Methods: Working Tables and Charts for Estimation of Thermodynamic Work Potential in Equilibrium Mixtures of Jet-A and Air

Science.gov (United States)

Mavris, Dimitri; Roth, Bryce; McDonald, Rob

2002-01-01

The objective of this report is to provide a tool to facilitate the application of thermodynamic work potential methods to aircraft and engine analysis. This starts with a discussion of the theoretical background underlying these methods, which is then used to derive various equations useful for thermodynamic analysis of aircraft engines. The work potential analysis method is implemented in the form of a set of working charts and tables that can be used to graphically evaluate work potential stored in high-enthalpy gas. The range of validity for these tables is 300 to 36,000 R, pressures between between 0.01 atm and 100 atm, and fuel-air ratios from zero to stoichiometric. The derivations and charts assume mixtures of Jet-A and air as the working fluid. The thermodynamic properties presented in these charts were calculated based upon standard thermodynamic curve fits.

Construction over abandoned mine workings

Energy Technology Data Exchange (ETDEWEB)

Healy, P R; Head, J M

1984-01-01

Guidance is given for engineers involved with the planning and development of sites previously undermined for coal and other minerals. Past methods of mining employed in Britain are described, and their short- and long-term effects on surface stability are assessed. Where modern methods of mining are relevant, or where structural design techniques for the surface effects of mining can be applied, these are included for illustration and completeness. Additional objectives over and above those for conventional site investigations are identified, and details are provided for the planning and execution of a mining investigation. Techniques for consolidation of old mine workings and remedial measures for mine shafts are described. Foundation design options are included for cases where expected ground movements can be accommodated. A comprehensive guide to sources of information on previous mining is presented, together with an example of a specification suitable for the consolidation of old shallow mine workings. (50 refs.)

Study on team evaluation (4). Reliability and validity of questionnaire survey-based team work evaluation method of power plant operator team

International Nuclear Information System (INIS)

Sasou, Kunihide; Hirose, Ayako; Misawa, Ryou; Yamaguchi, Hiroyuki

2006-01-01

The series of this study describes the necessity of the evaluation of team work from two aspects of operator's behavior and operators' mind. The authors propose Team Work Element Model which consists of necessary elements to build high performance team. This report discusses a method to evaluate team work from the second aspect, that is, competency trust, competition, for-the team spirit, etc. The authors survey the previous studies on psychological measures and organize a set of questions to evaluate 10 team work sub elements that are the parts of Team Work Element Model. The factor analysis shows that this set of questions is consists of 13 factors such as task-oriented leadership, harmony-oriented team atmosphere, etc. Close examination of the questions in each factor shows that 8 of 10 team work sub elements can be evaluated by this questionnaire. In addition, this questionnaire comprises scales additional 8 scales such as job satisfaction, leadership, etc. As a result, it is possible to evaluate team work from more comprehensive view points. (author)

Recovery, work-life balance and work experiences important to self-rated health : a questionnaire study on salutogenic work factors among Swedish primary health care employees

OpenAIRE

Ejlertsson, Lina; Heijbel, Bodil; Ejlertsson, Göran; Andersson, Ingemar

2018-01-01

BACKGROUND: There is a lack of information on positive work factors among health care workers. OBJECTIVE: To explore salutogenic work-related factors among primary health care employees. METHOD: Questionnaire to all employees (n = 599) from different professions in public and private primary health care centers in one health care district in Sweden. The questionnaire, which had a salutogenic perspective, included information on self-rated health from the previously validated SHIS (Salutogenic...

Falls From Agricultural Machinery: Risk Factors Related to Work Experience, Worked Hours, and Operators' Behavior.

Science.gov (United States)

Caffaro, Federica; Roccato, Michele; Micheletti Cremasco, Margherita; Cavallo, Eugenio

2018-02-01

Objective We investigated the risk factors for falls when egressing from agricultural tractors, analyzing the role played by worked hours, work experience, operators' behavior, and near misses. Background Many accidents occur within the agricultural sector each year. Among them, falls while dismounting the tractor represent a major source of injuries. Previous studies pointed out frequent hazardous movements and incorrect behaviors adopted by operators to exit the tractor cab. However, less is known about the determinants of such behaviors. In addition, near misses are known to be important predictors of accidents, but they have been under-investigated in the agricultural sector in general and as concerns falls in particular. Method A questionnaire assessing dismounting behaviors, previous accidents and near misses, and participants' relation with work was administered to a sample of Italian tractor operators ( n = 286). Results A mediated model showed that worked hours increase unsafe behaviors, whereas work experience decreases them. Unsafe behaviors in turn show a positive association with accidents, via the mediation of near misses. Conclusions We gave a novel contribution to the knowledge of the chain of events leading to fall accidents in the agricultural sector, which is one of the most hazardous industries. Applications Besides tractor design improvements, preventive training interventions may focus on the redesign of the actual working strategies and the adoption of engaging training methods in the use of machinery to optimize the learning of safety practices and safe behaviors.

Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study.

Science.gov (United States)

Nunes, Cláudia; Santos, Joana; da Silva, Manuela Vieira; Lourenço, Irina; Carvalhais, Carlos

2015-01-01

The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

Typing DNA profiles from previously enhanced fingerprints using direct PCR.

Science.gov (United States)

Templeton, Jennifer E L; Taylor, Duncan; Handt, Oliva; Linacre, Adrian

2017-07-01

Fingermarks are a source of human identification both through the ridge patterns and DNA profiling. Typing nuclear STR DNA markers from previously enhanced fingermarks provides an alternative method of utilising the limited fingermark deposit that can be left behind during a criminal act. Dusting with fingerprint powders is a standard method used in classical fingermark enhancement and can affect DNA data. The ability to generate informative DNA profiles from powdered fingerprints using direct PCR swabs was investigated. Direct PCR was used as the opportunity to generate usable DNA profiles after performing any of the standard DNA extraction processes is minimal. Omitting the extraction step will, for many samples, be the key to success if there is limited sample DNA. DNA profiles were generated by direct PCR from 160 fingermarks after treatment with one of the following dactyloscopic fingerprint powders: white hadonite; silver aluminium; HiFi Volcano silk black; or black magnetic fingerprint powder. This was achieved by a combination of an optimised double-swabbing technique and swab media, omission of the extraction step to minimise loss of critical low-template DNA, and additional AmpliTaq Gold ® DNA polymerase to boost the PCR. Ninety eight out of 160 samples (61%) were considered 'up-loadable' to the Australian National Criminal Investigation DNA Database (NCIDD). The method described required a minimum of working steps, equipment and reagents, and was completed within 4h. Direct PCR allows the generation of DNA profiles from enhanced prints without the need to increase PCR cycle numbers beyond manufacturer's recommendations. Particular emphasis was placed on preventing contamination by applying strict protocols and avoiding the use of previously used fingerprint brushes. Based on this extensive survey, the data provided indicate minimal effects of any of these four powders on the chance of obtaining DNA profiles from enhanced fingermarks. Copyright © 2017

Work stress interventions in hospital care : Effectiveness of the DISCovery method

NARCIS (Netherlands)

Niks, I.M.W.; de Jonge, J.; Gevers, J.M.P.; Houtman, I.L.D.

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and

Work Stress Interventions in Hospital Care: Effectiveness of the DISCovery Method

NARCIS (Netherlands)

Niks, I.M.W.; Gevers, J.M.P.; Jonge, J. de; Houtman, I.L.D.

2018-01-01

Effective interventions to prevent work stress and to improve health, well-being, and performance of employees are of the utmost importance. This quasi-experimental intervention study presents a specific method for diagnosis of psychosocial risk factors at work and subsequent development and

Validation method training: nurses' experiences and ratings of work climate.

Science.gov (United States)

Söderlund, Mona; Norberg, Astrid; Hansebo, Görel

2014-03-01

Training nursing staff in communication skills can impact on the quality of care for residents with dementia and contributes to nurses' job satisfaction. Changing attitudes and practices takes time and energy and can affect the entire nursing staff, not just the nurses directly involved in a training programme. Therefore, it seems important to study nurses' experiences of a training programme and any influence of the programme on work climate among the entire nursing staff. To explore nurses' experiences of a 1-year validation method training programme conducted in a nursing home for residents with dementia and to describe ratings of work climate before and after the programme. A mixed-methods approach. Twelve nurses participated in the training and were interviewed afterwards. These individual interviews were tape-recorded and transcribed, then analysed using qualitative content analysis. The Creative Climate Questionnaire was administered before (n = 53) and after (n = 56) the programme to the entire nursing staff in the participating nursing home wards and analysed with descriptive statistics. Analysis of the interviews resulted in four categories: being under extra strain, sharing experiences, improving confidence in care situations and feeling uncertain about continuing the validation method. The results of the questionnaire on work climate showed higher mean values in the assessment after the programme had ended. The training strengthened the participating nurses in caring for residents with dementia, but posed an extra strain on them. These nurses also described an extra strain on the entire nursing staff that was not reflected in the results from the questionnaire. The work climate at the nursing home wards might have made it easier to conduct this extensive training programme. Training in the validation method could develop nurses' communication skills and improve their handling of complex care situations. © 2013 Blackwell Publishing Ltd.

77 FR 17457 - Work Group on Alternative Test Methods for Commercial Measuring Devices

Science.gov (United States)

2012-03-26

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Work Group on Alternative... Work Group (WG) to examine alternative methods for testing the accuracy of commercial measuring devices... participates to promote uniformity among the states in laws, regulations, methods, and testing equipment that...

Interpretative Social Work: On the Uses of Qualitative Methods for Practice, Reflection and Research

Directory of Open Access Journals (Sweden)

Bettina Völter

2008-01-01

Full Text Available Qualitative methods could play an important role in the context of a lively, life-world oriented, and emancipatory self-reflective social work. They are already applied in three realms of social work: social work research, the daily practice of social workers and professional self-reflection. Even though these three realms overlap they are three distinct spheres of knowledge and action, which have specific aims. Therefore qualitative methods have to be adjusted to the needs of social science, practice and practice reflection. When students and practitioners of social work learn to use qualitative methods in this sense, they gain a competence which can be referred to as "ethnographic sophistication." This "ethnographic sophistication" contains essential elements of social work professionalism. Familiarity with qualitative methods and their application are highly relevant for the acquisition of basic competencies in social work, i.e., that what has become known as "reconstructive social pedagogy" is much more than just one social work method among others. But a consequence of the introduction of academic reforms of the so called "Bologna process" all over Europe is that it has become more difficult in many universities and universities of applied sciences to implement this approach. URN: urn:nbn:de:0114-fqs0801563

Effectivness of different teaching methods on ergonomics for 12-16 years old children working with computer

OpenAIRE

Jasionytė, Monika

2016-01-01

Effectivness of Different Teaching Methods on Ergonomics for 12-16 Years Old Children Working with Computer. Work author: Monika Jasionytė Work advisor: assistant Inga Raudonytė, Vilnius University faculty of Medicine Department of Rehabilitation, Physical and Sports Medicine. Main concept: ergonomics, children, methods. Work goal: figure out which teaching method is moust efficiant for 12-16 years old children, work with computer ergonomics Goals: 1. Figure out computer working place ergonom...

Getting agile methods to work for Cordys global software product development

NARCIS (Netherlands)

van Hillegersberg, Jos; Ligtenberg, Gerwin; Aydin, M.N.; Kotlarsky, J.; Willcocks, L.P.; Oshri, I.

2011-01-01

Getting agile methods to work in global software development is a potentially rewarding but challenging task. Agile methods are relatively young and still maturing. The application to globally distributed projects is in its early stages. Various guidelines on how to apply and sometimes adapt agile

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

Science.gov (United States)

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

A working-set framework for sequential convex approximation methods

DEFF Research Database (Denmark)

Stolpe, Mathias

2008-01-01

We present an active-set algorithmic framework intended as an extension to existing implementations of sequential convex approximation methods for solving nonlinear inequality constrained programs. The framework is independent of the choice of approximations and the stabilization technique used...... to guarantee global convergence of the method. The algorithm works directly on the nonlinear constraints in the convex sub-problems and solves a sequence of relaxations of the current sub-problem. The algorithm terminates with the optimal solution to the sub-problem after solving a finite number of relaxations....

Considerations on Applying the Method for Assessing the Level of Safety at Work

Directory of Open Access Journals (Sweden)

Costica Bejinariu

2017-07-01

Full Text Available The application of the method for assessing the level of safety at work starts with a document that contains the cover page, the description of the company (name, location, core business, organizational chart etc., description of the work system, a detailed list of its components, and a brief description of the assessment method. It continues with a Microsoft Excel document, which represents the actual application of the method and, finally, there is another document presenting conclusions, proposals, and prioritizations, which leads to the execution of the Prevention and Protection Plan. The present paper approaches the issue of developing the Microsoft Excel document, an essential part of the method for assessing the level of safety at work. The document is divided into a variable number of worksheets, showing the risk categories of general, specific, and management.

Method Points: towards a metric for method complexity

Directory of Open Access Journals (Sweden)

Graham McLeod

1998-11-01

Full Text Available A metric for method complexity is proposed as an aid to choosing between competing methods, as well as in validating the effects of method integration or the products of method engineering work. It is based upon a generic method representation model previously developed by the author and adaptation of concepts used in the popular Function Point metric for system size. The proposed technique is illustrated by comparing two popular I.E. deliverables with counterparts in the object oriented Unified Modeling Language (UML. The paper recommends ways to improve the practical adoption of new methods.

Assessment of knowledge and practices about breastfeeding and weaning among working and non-working mothers

International Nuclear Information System (INIS)

Khaliq, A.; Qamar, M.; Hussaini, S.A.; Azam, K.; Zehra, N.; Hussain, M.; Jaliawala, H.A

2017-01-01

Objective: To assess the knowledge and practices of working and non-working mothers regarding breast feeding and weaning. Methods: This cross-sectional study involving working and non-working mothers was conducted from May 2015 to May 2016 at different hospitals of Karachi. Data was collected from women who had at least one child aged below 5 years and who had previously breastfed their child. Non-probability quota sampling technique was used. SPSS 20 was used for data analysis. Results: Of the 414 participants, 207(50%) were non-working while 207(50%) were working mothers. The overall mean age was 29.6+-6.3 years. Moreover, 277(66.9%) mothers breastfed their youngest child and a significant difference was observed among the breast feeding practices of working and non-working mothers (p<0.05). Bottle-feeding was adopted by 320(77.9%) mothers as an alternative method although 259(62.6%) mothers were aware about the harmful effects of bottle-feeding. Home-made products were used for weaning by 389(94%) mothers. Conclusion: Knowledge and practices regarding breast feeding showed significant difference in most of the aspects between working and non-working mothers. As for weaning, both groups had the same knowledge and practices. (author)

Bearing Capacity of the Working Platform with Kinematic Method

Directory of Open Access Journals (Sweden)

Białek Katarzyna

2015-03-01

Full Text Available Bearing capacity of the working platform for heavy tracks was analysed using Distinct Layout Optimization (DLO method. The platform layer constructed from cohesionless soils is resting on weak cohesive subgrade. Different thickness of the platform, its effective angle of internal friction and undrained shear strength of the soft soil were taken into consideration. Kinematic method permits different failure mechanisms to be analyzed. Margin of safety for a given load and subsoil conditions was determined using two approaches: increasing the load or decreasing the shear strength up to failure. The results were compared with solution proposed in BRE recommendations.

The influence of previous subject experience on interactions during peer instruction in an introductory physics course: A mixed methods analysis

Science.gov (United States)

Vondruska, Judy A.

Over the past decade, peer instruction and the introduction of student response systems has provided a means of improving student engagement and achievement in large-lecture settings. While the nature of the student discourse occurring during peer instruction is less understood, existing studies have shown student ideas about the subject, extraneous cues, and confidence level appear to matter in the student-student discourse. Using a mixed methods research design, this study examined the influence of previous subject experience on peer instruction in an introductory, one-semester Survey of Physics course. Quantitative results indicated students in discussion pairs where both had previous subject experience were more likely to answer clicker question correctly both before and after peer discussion compared to student groups where neither partner had previous subject experience. Students in mixed discussion pairs were not statistically different in correct response rates from the other pairings. There was no statistically significant difference between the experience pairs on unit exam scores or the Peer Instruction Partner Survey. Although there was a statistically significant difference between the pre-MPEX and post-MPEX scores, there was no difference between the members of the various subject experience peer discussion pairs. The qualitative study, conducted after the quantitative study, helped to inform the quantitative results by exploring the nature of the peer interactions through survey questions and a series of focus groups discussions. While the majority of participants described a benefit to the use of clickers in the lecture, their experience with their discussion partners varied. Students with previous subject experience tended to describe peer instruction more positively than students who did not have previous subject experience, regardless of the experience level of their partner. They were also more likely to report favorable levels of comfort with

3D Fourier synthesis of a new X-ray picture identical in projection to a previous picture

International Nuclear Information System (INIS)

Carlsson, P.E.

1993-01-01

A central problem in diagnostic radiology is to compare a new X-ray picture with a previous picture and from this comparison be able to decide if anatomical changes have occurred in the patient or not. It is of primary interest that these pictures are identical in projection. If not it is difficult to decide with confidence if differences between the pictures are due to anatomical changes or differences in their projection geometry. In this thesis we present a non invasive method that makes it possible to find the relative changes in the projection geometry between the exposure of a previous picture and a new picture. The method presented is based on the projection slice theorem (central section theorem). Instead of an elaborate search for a single new picture a pre-planned set of pictures are exposed from a circular orbit above the patient. By using 3D Fourier transform techniques we are able to synthesize a new X-ray picture from this set of pictures that is identical in projection to the previous one. The method has certain limits. Those are as follows: *The X-ray focus position must always be at a fixed distance from the image plane. *The object may only be translated parallel to the image plane and rotated around axes perpendicular to this plane. Under those restrictions, we may treat divergent projection pictures as if they are generated by a parallel projection of a scaled object. The unknown rotation and translation of the object in the previous case are both retrieved in two different procedures and compensated for. Experiments on synthetic data has proved that the method is working even in the presence of severe noise

Applying work flow control in make-to-order job shops

DEFF Research Database (Denmark)

Harrod, Steven; Kanet, John J.

2013-01-01

of a relatively new work flow control method, "paired overlapping loops of cards" or POLCA. Additionally, this paper explains "lockup," a previously unreported terminal system blocking behavior. A management method to prevent occurrence of lockup is provided. (C) 2012 Elsevier B.V. All rights reserved....

Comparing three methods for participatory simulation of hospital work systems

DEFF Research Database (Denmark)

Broberg, Ole; Andersen, Simone Nyholm

Summative Statement: This study compared three participatory simulation methods using different simulation objects: Low resolution table-top setup using Lego figures, full scale mock-ups, and blueprints using Lego figures. It was concluded the three objects by differences in fidelity and affordance...... scenarios using the objects. Results: Full scale mock-ups significantly addressed the local space and technology/tool elements of a work system. In contrast, the table-top simulation object addressed the organizational issues of the future work system. The blueprint based simulation addressed...

An automated patient recognition method based on an image-matching technique using previous chest radiographs in the picture archiving and communication system environment

International Nuclear Information System (INIS)

Morishita, Junji; Katsuragawa, Shigehiko; Kondo, Keisuke; Doi, Kunio

2001-01-01

An automated patient recognition method for correcting 'wrong' chest radiographs being stored in a picture archiving and communication system (PACS) environment has been developed. The method is based on an image-matching technique that uses previous chest radiographs. For identification of a 'wrong' patient, the correlation value was determined for a previous image of a patient and a new, current image of the presumed corresponding patient. The current image was shifted horizontally and vertically and rotated, so that we could determine the best match between the two images. The results indicated that the correlation values between the current and previous images for the same, 'correct' patients were generally greater than those for different, 'wrong' patients. Although the two histograms for the same patient and for different patients overlapped at correlation values greater than 0.80, most parts of the histograms were separated. The correlation value was compared with a threshold value that was determined based on an analysis of the histograms of correlation values obtained for the same patient and for different patients. If the current image is considered potentially to belong to a 'wrong' patient, then a warning sign with the probability for a 'wrong' patient is provided to alert radiology personnel. Our results indicate that at least half of the 'wrong' images in our database can be identified correctly with the method described in this study. The overall performance in terms of a receiver operating characteristic curve showed a high performance of the system. The results also indicate that some readings of 'wrong' images for a given patient in the PACS environment can be prevented by use of the method we developed. Therefore an automated warning system for patient recognition would be useful in correcting 'wrong' images being stored in the PACS environment

Application work risk of manual material handling operators using different lifting methods

Science.gov (United States)

Anizar; Matondang, AR; Sibarani, JA

2018-02-01

This study observed the activity of lifting and moving crates containing bottles at a pallet station in a carbonated drink factory. The activity of moving crates, each weighing 15 kg, is performed by four operators using different methods. An operator manually moves 250 crates daily and often takes rest during working. This study aims to find the most efficient method, that is using the least energy, to move crates. The workload is assessed using the method of Cardiovascular Strain Load (CVL) and energy expenditure. Operators’ arterial pulse is measured for 1 minute right before they start working and after they finish working; this is done to obtain work arterial pulse and rest arterial pulse. The way operators lift crates is analyzed using biomechanics. It is found that fatigue is experienced by all operators, with the exception of the 3rd operator who has a %CVL number below 30%. He positions the pallet to be parallel to the conveyor, and then stand in between during the lifting process. He only rotates his body to move the crate from the conveyor onto the pallet, requiring only little energy. This is one of the reasons why the %CVL number is lower than the other operators.

Systematic evaluation of observational methods assessing biomechanical exposures at work

DEFF Research Database (Denmark)

Takala, Esa-Pekka; Pehkonen, Irmeli; Forsman, Mikael

2010-01-01

the use of technical instruments. Generally, the observations showed moderate to good agreement with the corresponding assessments made from video recordings; agreement was the best for large-scale body postures and work actions. Postures of wrist and hand as well as trunk rotation seemed to be more...... difficult to observe correctly. Intra- and inter-observer repeatability were reported for 7 and 17 methods, respectively, and were judged mostly to be good or moderate. CONCLUSIONS: With training, observers can reach consistent results on clearly visible body postures and work activities. Many observational...

Risk of injury after evening and night work - findings from the Danish Working Hour Database

DEFF Research Database (Denmark)

Nielsen, Helena B; Larsen, Ann D; Dyreborg, Johnny

2018-01-01

during the past week increases risk of injury when reducing recall bias and unmeasured confounding. Methods We linked daily working hours at the individual level of 69 200 employees (167 726 person years from 2008-2015), primarily working at hospitals to registry information on 11 834 injuries leading......Objectives Evening and night work have been associated with higher risk of injury than day work. However, previous findings may be affected by recall bias and unmeasured confounding from differences between day, evening and night workers. This study investigates whether evening and night work...... to emergency room visits or death. Analyses were conducted with Poisson regression models in the full population including permanent day, evening and night workers, and in two sub-populations of evening and night workers, with both day and evening or night work, respectively. Thus, the exchangeability between...

Work and Family Plans among At-Risk Israeli Adolescents: A Mixed-Methods Study

Science.gov (United States)

Cinamon, Rachel Gali; Rich, Yisrael

2014-01-01

Quantitative methods were used to investigate attributions of importance to work and family roles and anticipated work--family conflict and facilitation among 353 at-risk Israeli male and female adolescents. Qualitative interviews conducted with 26 of the at-risk youth explored future work and family perceptions. Findings indicated that both sexes…

Domain decomposition methods for mortar finite elements

Energy Technology Data Exchange (ETDEWEB)

Widlund, O.

1996-12-31

In the last few years, domain decomposition methods, previously developed and tested for standard finite element methods and elliptic problems, have been extended and modified to work for mortar and other nonconforming finite element methods. A survey will be given of work carried out jointly with Yves Achdou, Mario Casarin, Maksymilian Dryja and Yvon Maday. Results on the p- and h-p-version finite elements will also be discussed.

Development of a tracking method for augmented reality applied to nuclear plant maintenance work

International Nuclear Information System (INIS)

Shimoda, Hiroshi; Maeshima, Masayuki; Nakai, Toshinori; Bian, Zhiqiang; Ishii, Hirotake; Yoshikawa, Hidekazu

2005-01-01

In this paper, a plant maintenance support method is described, which employs the state-of-the-art information technology, Augmented Reality (AR), in order to improve efficiency of NPP maintenance work and to prevent from human error. Although AR has a great possibility to support various works in real world, it is difficult to apply it to actual work support because the tracking method is the bottleneck for the practical use. In this study, a bar code marker tracking method is proposed to apply AR system for a maintenance work support in NPP field. The proposed method calculates the users position and orientation in real time by two long markers, which are captured by the user-mounted camera. The markers can be easily pasted on the pipes in plant field, and they can be easily recognized in long distance in order to reduce the number of pasted markers in the work field. Experiments were conducted in a laboratory and plant field to evaluate the proposed method. The results show that (1) fast and stable tracking can be realized, (2) position error in camera view is less than 1%, which is almost perfect under the limitation of camera resolution, and (3) it is relatively difficult to catch two markers in one camera view especially in short distance

[Proposal of a method for collective analysis of work-related accidents in the hospital setting].

Science.gov (United States)

Osório, Claudia; Machado, Jorge Mesquita Huet; Minayo-Gomez, Carlos

2005-01-01

The article presents a method for the analysis of work-related accidents in hospitals, with the double aim of analyzing accidents in light of actual work activity and enhancing the vitality of the various professions that comprise hospital work. This process involves both research and intervention, combining knowledge output with training of health professionals, fostering expanded participation by workers in managing their daily work. The method consists of stimulating workers to recreate the situation in which a given accident occurred, shifting themselves to the position of observers of their own work. In the first stage of analysis, workers are asked to show the work analyst how the accident occurred; in the second stage, the work accident victim and analyst jointly record the described series of events in a diagram; in the third, the resulting record is re-discussed and further elaborated; in the fourth, the work accident victim and analyst evaluate and implement measures aimed to prevent the accident from recurring. The article concludes by discussing the method's possibilities and limitations in the hospital setting.

Work organisation, technology and working conditions

OpenAIRE

Dhondt, S.; Kraan, K.; Sloten, G. van

2002-01-01

The personal computer, computer networks and the Internet have brought the Union into the Information Age. These technological changes have inevitably led to changes in the work environment and the quality of working conditions. For the third time, the European Foundation for the Improvement of Living and Working Conditions has carried out a questionnaire-based survey on working conditions throughout the European Union, covering all Member States. Previous surveys were carried out in 1991 and...

PSYCHOTHERAPEUTICAL METHODS FOR WORK WITH CHILDREN SUFFERING FROM CEREBRAL PARALYSIS

Directory of Open Access Journals (Sweden)

Ivajlo PETROV

2000-06-01

Full Text Available Therapy in somatopedy is always viewed in the light of the ‘initial theoretical conception’ about the unity of the mental and the somatic (neurophysiological, both in the genesis of the physical and mental disturbances and in the system of therapeutic treatments. The body and the soul, or the physical and the mental represent an unbreakable unity.The psychotherapy is especially adequate method for work with children suffering from cerebral palsy.According to our research work connected with the studying of the utilization of various forms of psychotherapy in the rehabilitation schools for children with cerebral palsy in some places in Bulgaria, as well as our own long-range experiments, we can claim with certainty that the following methods give very good results:1. Music therapy2. Art therapy3. Puppet therapy4. Cultural therapy5. Biblio therapy6. Rational psychotherapy of P. Dubois7. Family therapy8. Cognitive-behavioural therapy9. Suggestion while awake10.Autogen training of J. Schlitz

A working definition of scenario and a method of scenario construction

International Nuclear Information System (INIS)

Barr, G.E.; Dunn, E.

1992-01-01

The event-tree method of scenario construction has been chosen for the Yucca Mountain performance assessment. Its applicability and suitability to the problem are discussed and compared with those of the Nuclear Regulatory Commission (NRC) method. The event-tree method is appropriate for an incompletely characterized site, where there must be an evolving understanding, over time, of the processes at work, for a site that may require analysis of details in specific context, and when the scenario functions to guide site characterization. Anticipating the eventual requirement for using the NRC method, we show that the event-tree method can be translated to the NRC format after final scenario screening

Unnecessary work tasks and mental health

DEFF Research Database (Denmark)

Madsen, Ida E H; Tripathi, Manisha; Borritz, Marianne

2014-01-01

OBJECTIVES: According to the "stress-as-offense-to-self" perspective, work tasks that are considered unnecessary or unreasonable - so-called "illegitimate work tasks" - are likely to elicit stress-reactions. Previous studies, mostly cross-sectional, have shown that illegitimate tasks are associated...... with increased self-reported stress, cortisol, and counterproductive work behavior. In this article, we examine the prospective association between unnecessary work tasks, one type of illegitimate work tasks, and mental health among Danish human service workers. Further, we explore whether this association...... is modified by sex, age, occupational position, and baseline mental health status. METHODS: The data were obtained from self-administered questionnaires from 1351 Danish human service workers in three waves of data-collection during 1999-2005. We measured unnecessary work tasks by a single item, and assessed...

The rationale for selecting the method of calculation of project products coast (works, services

Directory of Open Access Journals (Sweden)

O. V. Molchanova

2017-01-01

Full Text Available In modern conditions of management it is necessary to develop a number of recommendations on the introduction of management accounting at state-owned enterprises that carry out revenue-generating activities or based on the right of economic management. It is necessary to apply the correct cost-accounting method for the production of products, works, services for a more rational calculation of the cost price. This will allow management personnel to receive timely objective information about their cost price, identify the feasibility of production and sales, justify the assortment, plan profits. The procedure for determining the cost price of the project products (works, services in the theory and practice of the state enterprise of the Astrakhan region “Kasprybproekt” is investigated in the work. With the existing practice of planning in design organizations, the planned cost price of design and survey works for established cost items is planned in the cost estimate for production by the design organization as a whole and by the types of work: design, survey and others, without subdividing it by orders (projects. According to this, accounting of the actual costs for work in the design organizations is based. The study showed that the state enterprise of the Astrakhan region “Kasprybproyekt” performs different projects with different execution periods; therefore, it is advisable to use one method of calculating the cost price - job (order costing method, and link it to the responsibility centers depending on the department of the performer. Based on the research of the used method to the cost price calculate of the project products (works, services in the state enterprise of the Astrakhan region “Kasprybproekt”, it was proposed to use the job (order costing method that allows to detail all the project costs without distorting the final financial result and optimize the project costs. If the calculation method is correctly determined

Getting Over Method: Literacy Teaching as Work in "New Times."

Science.gov (United States)

Luke, Allan

1998-01-01

Shifts the terms of the "great debate" from technical questions about teaching method to questions about how various kinds of literacies work within communities--matters of government cutbacks and institutional downsizing, shrinking resource and taxation bases, and of students, communities, teachers, and schools trying to cope with rapid and…

Apply of torque method at rationalization of work

Directory of Open Access Journals (Sweden)

Bandurová Miriam

2001-03-01

Full Text Available Aim of the study was to analyse consumption of time for profession - cylinder grinder, by torque method.Method of torque following is used for detection of sorts and size of time slope, on detection of portion of individual sorts of time consumption and cause of time slope. By this way it is possible to find out coefficient of employment and recovery of workers in organizational unit. Advantage of torque survey is low costs on informations acquirement, non-fastidiousness per worker and observer, which is easy trained. It is mentally acceptable method for objects of survey.Finding and detection of reserves in activity of cylinders grinder result of torque was surveys. Loss of time presents till 8% of working time. In 5 - shift service and average occupiying of shift by 4,4 grinder ( from statistic information of service , loss at grinder of cylinders are for whole centre 1,48 worker.According presented information it was recommended to cancel one job place - grinder of cylinders - and reduce state about one grinder. Next job place isn't possible cancel, because grindery of cylinders must to adapt to the grind line by number of polished cylinders in shift and semi - finishing of polished cylinders can not be high for often changes in area of grinding and sortiment changes.By this contribution we confirmed convenience of exploitation of torque method as one of the methods using during the job rationalization.

Developing New Working Methods in Medium Cycle Higher Education

DEFF Research Database (Denmark)

Staugaard, Hans Jørgen

and complete a higher education study, independently of the geographic, social and cultural distance from their home 2) to intensify collaboration between the university college and local enterprises. ICT-based satellites are supposed to facilitate a close collaboration with local enterprises and authorities......This paper outlines the intentions of a research and development project running from January 2011until July 2014. The project, called FlexVid, aims at developing new structures and working methods for university college education. The intentions are 1) to make it easier for students to join...... and reinforce the integration of current issues from every-day life in the enterprises into the educational programs. To do this, we need 3) to rethink the way teachers and students usually work and intensify the problem based approach in the educational programs....

Navigation and Comprehension of Digital Expository Texts: Hypertext Structure, Previous Domain Knowledge, and Working Memory Capacity

Science.gov (United States)

Burin, Debora I.; Barreyro, Juan P.; Saux, Gastón; Irrazábal, Natalia C.

2015-01-01

Introduction: In contemporary information societies, reading digital text has become pervasive. One of the most distinctive features of digital texts is their internal connections via hyperlinks, resulting in non-linear hypertexts. Hypertext structure and previous knowledge affect navigation and comprehension of digital expository texts. From the…

North-Karelian forest owners' attitude to nature-emulating forestry work methods

International Nuclear Information System (INIS)

Jouhiaho, A.

1999-01-01

The TTS-Institute conducted a mail-questionnaire study of forest owners' opinions in the Province of North Karelia (Pohjois-Karjala) concerning work methods as applied in silviculture and logging. In addition, the study looked into the matter of the forest owners' willingness to pay for the implementation of nature-emulating silviculture and logging. The response percentage was 57 % with 344 forest owners responding to the questionnaire. The majority of the forest owners understood nature-emulating silviculture and logging as worthwhile objectives and as actions aimed at economically advantageous outcomes. Nature-emulating work methods involve the use of method emulating the natural development dynamics of forest ecosystems and causing minimum disturbance to the ecosystem. The term 'nature-emulating' was also seen to include forest treatment with awareness of landscape management viewpoints. Less than half of the forest owners were willing to pay for the implementation of nature-emulating silviculture and logging. Of those willing to pay, half were prepared to pay an extra 6 - 10 % for sivicultural and 1 - 5 % for logging on top of the costs. (orig.)

Implementation of new working methods in the floor-laying trade: Long-term effects on knee load and knee complaints

DEFF Research Database (Denmark)

Jensen, Lilli Kirkeskov; Friche, Claus

2010-01-01

This study compared floor laying using new working methods involving standing up, to the traditional methods involving working on one's knees.......This study compared floor laying using new working methods involving standing up, to the traditional methods involving working on one's knees....

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

Science.gov (United States)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

The psychosocial work environment is associated with risk of stroke at working age.

Science.gov (United States)

Jood, Katarina; Karlsson, Nadine; Medin, Jennie; Pessah-Rasmussen, Hélène; Wester, Per; Ekberg, Kerstin

2017-07-01

Objective The aim of this study was to explore the relation between the risk of first-ever stroke at working age and psychological work environmental factors. Methods A consecutive multicenter matched 1:2 case-control study of acute stroke cases (N=198, age 30-65 years) who had been working full-time at the time of their stroke and 396 sex- and age-matched controls. Stroke cases and controls answered questionnaires on their psychosocial situation during the previous 12 months. The psychosocial work environment was assessed using three different measures: the job-control-demand model, the effort-reward imbalance (ERI) score, and exposures to conflict at work. Results Among 198 stroke cases and 396 controls, job strain [odds ratio (OR) 1.30, 95% confidence interval (95% CI) 1.05-1.62], ERI (OR 1.28, 95% CI 1.01-1.62), and conflict at work (OR 1.75, 95% CI 1.07-2.88) were independent risk factors of stroke in multivariable regression models. Conclusions Adverse psychosocial working conditions during the past 12 months were more frequently observed among stroke cases. Since these factors are presumably modifiable, interventional studies targeting job strain and emotional work environment are warranted.

Interactions between lean management and the psychosocial work environment in a hospital setting - a multi-method study.

Science.gov (United States)

Ulhassan, Waqar; von Thiele Schwarz, Ulrica; Thor, Johan; Westerlund, Hugo

2014-10-22

As health care struggles to meet increasing demands with limited resources, Lean has become a popular management approach. It has mainly been studied in relation to health care performance. The empirical evidence as to how Lean affects the psychosocial work environment has been contradictory. This study aims to study the interaction between Lean and the psychosocial work environment using a comprehensive model that takes Lean implementation information, as well as Lean theory and the particular context into consideration. The psychosocial work environment was measured twice with the Copenhagen Psychosocial Questionnaire (COPSOQ) employee survey during Lean implementations on May-June 2010 (T1) (n = 129) and November-December 2011 (T2) (n = 131) at three units (an Emergency Department (ED), Ward-I and Ward-II). Information based on qualitative data analysis of the Lean implementations and context from a previous paper was used to predict expected change patterns in the psychosocial work environment from T1 to T2 and subsequently compared with COPSOQ-data through linear regression analysis. Between T1 and T2, qualitative information showed a well-organized and steady Lean implementation on Ward-I with active employee participation, a partial Lean implementation on Ward-II with employees not seeing a clear need for such an intervention, and deterioration in already implemented Lean activities at ED, due to the declining interest of top management. Quantitative data analysis showed a significant relation between the expected and actual results regarding changes in the psychosocial work environment. Ward-I showed major improvements especially related to job control and social support, ED showed a major decline with some exceptions while Ward-II also showed improvements similar to Ward-I. The results suggest that Lean may have a positive impact on the psychosocial work environment given that it is properly implemented. Also, the psychosocial work environment may even

Work in process level definition: a method based on computer simulation and electre tri

Directory of Open Access Journals (Sweden)

Isaac Pergher

2014-09-01

Full Text Available This paper proposes a method for defining the levels of work in progress (WIP in productive environments managed by constant work in process (CONWIP policies. The proposed method combines the approaches of Computer Simulation and Electre TRI to support estimation of the adequate level of WIP and is presented in eighteen steps. The paper also presents an application example, performed on a metalworking company. The research method is based on Computer Simulation, supported by quantitative data analysis. The main contribution of the paper is its provision of a structured way to define inventories according to demand. With this method, the authors hope to contribute to the establishment of better capacity plans in production environments.

ORGANIZATION AND METHOD FOR THE REMOTE LABORATORY WORK OF GENERAL TECHNICAL DISCIPLINE

Directory of Open Access Journals (Sweden)

Alfia Sh. Salakhova

2014-01-01

Full Text Available The article is devoted to the important problem – use of distant technologies in engineering education in the laboratory experiments. The role of distant experiment in the modern engineering education is discussed. The authors consider structure of the distant system to real experiments control and the method of realization distant laboratory work in the educational process. The analysis of distant laboratory work effectiveness is discussed. 

Promotion of a healthy work life at small enterprises in Thailand by participatory methods.

Science.gov (United States)

Krungkraiwong, Sudthida; Itani, Toru; Amornratanapaichit, Ratanaporn

2006-01-01

The major problems of small enterprises include unfavourable working conditions and environment that affect safety and health of workers. The WISE (Work Improvement in Small Enterprises) methodology developed by the ILO has been widely applied to improve occupational safety and health in small enterprises in Thailand. The participatory methods building on local good practices and focusing on practicable improvements have proven effective in controlling the occupational hazards in these enterprises at their sources. As a result of applying the methods in small-scale industries, the frequency of occupational accidents was reduced and the working environment actually improved in the cases studied. The results prove that the participatory approach taken by the WISE activities is a useful and effective tool to make owner/managers and workers in small enterprises voluntarily improve their own working conditions and environment. In promoting a healthy work life at small enterprises in Thailand, it is important to further develop and spread the approach.

WorkZoneQ user guide for two-lane freeway work zones.

Science.gov (United States)

2013-06-01

WorkZoneQ was developed in Visual Basic for Applications (VBA) to implement the results of the previous study, : Queue and Users Costs in Highway Work Zones. This report contains the WorkZoneQ user guide. WorkZoneQ : consists of eight Excel ...

Final Work Plan: Targeted Investigation at York, Nebraska

Energy Technology Data Exchange (ETDEWEB)

LaFreniere, Lorraine M. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-08-01

The targeted investigation at York will be implemented in phases, so that data collected and interpretations developed at each stage of the program can be evaluated to guide subsequent phases most effectively. Section 2 of this Work Plan presents a brief overview of the York site, its geologic and hydrologic setting, and the previous CCC/USDA investigations. Section 3, outlines the proposed technical program for the targeted investigation, and Section 4 describes the investigative methods to be employed. A community relations plan is in Section 5, and Section 6 includes health and safety information. In addition to this site-specific Work Plan, the Master Work Plan (Argonne 2002) developed by Argonne for CCC/USDA investigations in Nebraska should be consulted for complete details of the methods and procedures to be used at York.

Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management To Safely And Effectively Complete Nuclear Construction Work

International Nuclear Information System (INIS)

Leso, K.F.; Hamilton, H.M.; Farner, M.; Heath, T.

2010-01-01

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

Energy Technology Data Exchange (ETDEWEB)

LESO KF; HAMILTON HM; FARNER M; HEATH T

2010-01-14

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

Burnout in Nurses Working With Youth With Chronic Pain: A Mixed-Methods Analysis.

Science.gov (United States)

Rodrigues, Nikita P; Cohen, Lindsey L; Swartout, Kevin M; Trotochaud, Karen; Murray, Eileen

2018-05-01

Nursing is a rewarding but also challenging profession. Nurses are at risk for burnout and premature exit from the profession, which is detrimental to them, their patients, and the healthcare system. There are few studies examining the unique correlates of burnout in nurses working with pediatric populations. The current 2-study project used mixed-methods (qualitative and then quantitative) analysis to explore burnout in nurses working in an inpatient unit with youth with chronic pain. Study I participants included all of the 32 nurses who worked in an inpatient pediatric unit, which admits patients with chronic pain. Qualitative analyses of focus groups were used to extract themes. These themes were examined via a quantitative battery completed by 41 nurses from 2 inpatient pediatric units with youth with chronic pain. The themes were burnout, moral distress, negative beliefs about chronic pain, barriers to pain management, fear of losing compassion, coworker support as a coping method, time worked in the unit, professional self-efficacy, and negative views of the hospital environment. Quantitative results supported most of the qualitative findings, and taken together, the findings supported a model of burnout in nurses working with youth with chronic pain. Conclusions We integrated qualitative and quantitative findings to develop a model of nurse burnout. This model provides a framework for evaluating and targeting burnout in nurses working with pediatric patients with chronic pain.

Assessment of knowledge and practices about breastfeeding and weaning among working and non-working mothers.

Science.gov (United States)

Khaliq, Asif; Qamar, Mehak; Hussaini, Syed Abdullah; Azam, Kiran; Zehra, Nosheen; Hussain, Mujtaba; Jaliawala, Huzaifa Ali

2017-03-01

To assess the knowledge and practices of working and non-working mothers regarding breastfeeding and weaning. This cross-sectional study involving working and non-working mothers was conducted from May 2015 to May 2016 at different hospitals of Karachi. Data was collected from women who had at least one child aged below 5 years and who had previously breastfed their child. Non-probability quota sampling technique was used. SPSS 20 was used for data analysis.. Of the 414 participants, 207(50%) were non-working while 207(50%) were working mothers. The overall mean age was 29.6±6.3 years. Moreover, 277(66.9%) mothers breastfed their youngest child and a significant difference was observed among the breastfeeding practices of working and non-working mothers (pmothers as an alternative method although 259(62.6%) mothers were aware about the harmful effects of bottle-feeding. Home-made products were used for weaning by 389(94%) mothers. Knowledge and practices regarding breastfeeding showed significant difference in most of the aspects between working and non-working mothers. As for weaning, both groups had the same knowledge and practices.

Prospects for using new methods of metal plastic working in power engineering

International Nuclear Information System (INIS)

Bondarenko, V.T.; Koltunov, V.M.

1979-01-01

Reviewed are new promising methods of plastic working, for the production of NPS equipment. Shown is the efficiency of rotary shaping for the production of large-sized articles of cylindrical or conical configuration, cold working on roller reeling mills and combining the reeling and forming to produce one-layer and multilayer bottoms of pressure vessels. A number of ways to expand and cut tubes for steam generators is marked and the information on equipment for these processes is given

CLOUD-BASED INTERACTIVE EDUCATIONAL AND METHODICAL COMPLEX FOR THE COURSE “INFORMATICS” IN INDEPENDENT WORK OF STUDENTS

Directory of Open Access Journals (Sweden)

И Н Куринин

2016-12-01

Full Text Available This article concentrates on the basic materials of the educational and methodical complex of a modern format (cloud-based and interactive, used in the educational process of the course “Informatics”, which significantly expands the share of independent work of students according to the increased number of students’ practical work (laboratory work, educational projects, essays. This workshop focuses on mastering the methods of work with personal mobile and office computers, Office programs, Internet technologies by students and making students receive the competences to solve topical applied problems. Efficiency of students’ independent work is additionally ensured by educational and methodical tutorials (lecture notes and compilations of test tasks, excercises, models and examples of performing all tasks, developed by the authors of the article.

SONOGRAPHIC PREDICTION OF SCAR DEHISCENCE IN WOMEN WITH PREVIOUS CAESAREAN SECTION

Directory of Open Access Journals (Sweden)

Shubhada Suhas Jajoo

2018-01-01

Full Text Available BACKGROUND Caesarean section (Sectio Caesarea is a surgical method for the completion of delivery. After various historical modifications of operative techniques, modern approach consists in the transverse dissection of the anterior wall of the uterus. The rate of vaginal birth after caesarean section was significantly reduced from year to year and the rate of repeated caesarean section is increased during the past 10 years. Evaluation of scar thickness is done by ultrasound, but it is still debatable size of thick scar that would be guiding “cut-off value” for the completion of the delivery method. To better assess the risk of uterine rupture, some authors have proposed sonographic measurement of lower uterine segment thickness near term assuming that there is an inverse correlation between LUS thickness and the risk of uterine scar defect. Therefore, this assessment for the management of women with prior CS may increase safety during labour by selecting women with the lowest risk of uterine rupture. The aim of the study is to study the diagnostic accuracy of sonographic measurements of the Lower Uterine Segment (LUS thickness near term in predicting uterine scar defects in women with prior Caesarean Section (CS. We aim to ascertain the best cut-off values for predicting uterine rupture. MATERIALS AND METHODS 100 antenatal women with history of previous one LSCS who come to attend antenatal clinic will be assessed for scar thickness by transabdominal ultrasonography and its correlation with intraoperative findings. This prospective longitudinal study was conducted for 1 year after IEC approval with inclusion criteria previous one LSCS. Exclusion criteria- 1 Previous myomectomy scar; 2 Previous 2 LSCS; 3 Previous hysterotomy scar. RESULTS Our findings indicate that there is a strong association between degree of LUS thinning measured near term and the risk of uterine scar defect at birth. In our study, optimal cut-off value for predicting

Sustainable Industrial Production – undergraduate course on methods and tools in industry’s environmental work

DEFF Research Database (Denmark)

Wenzel, Henrik

2003-01-01

assessment and eco-design, process integration and pinch analysis, and finally a case study of own preference. All project work is done on real industry projects, and the project team gets close encounter with the companies and constructive critique during their work allowing them to incorporate the critique......The course aims at teaching key methods and tools for industry’s environmental work. It focuses on operational tools targeted for environmental improvements at various levels of intervention: the product, the production, the process and the emission. At these intervention levels, engineering...... disciplines are taught within the areas of: Management and planning, System description and inventory, Analysis and assessment, and Design & construction. The student is given the overview and holistic understanding of existing methods and tools and their field of application. Some methods and tools...

Security warning method and system for worker safety during live-line working

Science.gov (United States)

Jiang, Chilong; Zou, Dehua; Long, Chenhai; Yang, Miao; Zhang, Zhanlong; Mei, Daojun

2017-09-01

Live-line working is an essential part in the operations in an electric power system. Live-line workers are required to wear shielding clothing. Shielding clothing, however, acts as a closed environment for the human body. Working in a closed environment for a long time can change the physiological responses of the body and even endanger personal safety. According to the typical conditions of live-line working, this study synthesizes environmental factors related to shielding clothing and the physiological factors of the body to establish the heart rate variability index RMSSD and the comprehensive security warning index SWI. On the basis of both indices, this paper proposes a security warning method and system for the safety live-line workers. The system can monitor the real-time status of workers during live-line working to provide security warning and facilitate the effective safety supervision by the live operation center during actual live-line working.

Nuclear methods in the study of fine arts works and in archaelogy

International Nuclear Information System (INIS)

Kollertova, L.

1976-01-01

An outline is presented of fundamental studies on the application of X-ray fluorescence analysis, activation analysis, and some other nuclear methods in the study and the evaluation of fine arts works and in archaeology. (B.S.)

Influence of previous knowledge in Torrance tests of creative thinking

OpenAIRE

Aranguren, María; Consejo Nacional de Investigaciones Científicas y Técnicas CONICET

2015-01-01

The aim of this work is to analyze the influence of study field, expertise and recreational activities participation in Torrance Tests of Creative Thinking (TTCT, 1974) performance. Several hypotheses were postulated to explore the possible effects of previous knowledge in TTCT verbal and TTCT figural university students’ outcomes. Participants in this study included 418 students from five study fields: Psychology;Philosophy and Literature, Music; Engineering; and Journalism and Advertisin...

Personnel's Health Surveillance at Work: Effect of Age, Body Mass Index, and Shift Work on Mental Workload and Work Ability Index

Directory of Open Access Journals (Sweden)

Shahram Safari

2013-01-01

Full Text Available Introduction. Two great changes in developed countries are taking place: populations are ageing and becoming increasingly overweight. Combination of these factors with shift work is a risk factor for work ability and mental workload that are dynamic processes which change greatly throughout an individual's work life. The aim of this study was to investigate mental workload and work ability in textile workers and to identify factors which affect work ability and mental workload. Methods. This cross-sectional study was carried out among 194 male workers in textile industry. Employees based on their job group and work conditions have been divided into 6 categories. They completed work ability index and mental workload questionnaires during three work shifts. Body mass index (BMI and demographic details were recorded. Results. All of the participants rated their work ability as moderate with high mental workload. The mean WAI and mental workload in age group were significant. The mean BMI was 25.5 kg/m2 (standard deviation 4.1 and the mean age was 40.22 years. There was a statistically significant correlation between work ability index and shift work. Conclusions. Unlike the previous study, a decrease point in WAI started in early age that may be due to life-style work and another psychological factor; on the other hand, NASA-TLX revealed high score in six subscales that can be another reason for low WAI.

Personnel's Health Surveillance at Work: Effect of Age, Body Mass Index, and Shift Work on Mental Workload and Work Ability Index

Science.gov (United States)

Safari, Shahram; Akbari, Jafar; Kazemi, Meghdad; Mououdi, Mohammad Amin; Mahaki, Behzad

2013-01-01

Introduction. Two great changes in developed countries are taking place: populations are ageing and becoming increasingly overweight. Combination of these factors with shift work is a risk factor for work ability and mental workload that are dynamic processes which change greatly throughout an individual's work life. The aim of this study was to investigate mental workload and work ability in textile workers and to identify factors which affect work ability and mental workload. Methods. This cross-sectional study was carried out among 194 male workers in textile industry. Employees based on their job group and work conditions have been divided into 6 categories. They completed work ability index and mental workload questionnaires during three work shifts. Body mass index (BMI) and demographic details were recorded. Results. All of the participants rated their work ability as moderate with high mental workload. The mean WAI and mental workload in age group were significant. The mean BMI was 25.5 kg/m2 (standard deviation 4.1) and the mean age was 40.22 years. There was a statistically significant correlation between work ability index and shift work. Conclusions. Unlike the previous study, a decrease point in WAI started in early age that may be due to life-style work and another psychological factor; on the other hand, NASA-TLX revealed high score in six subscales that can be another reason for low WAI. PMID:23956756

Chapter 2. Experimental testing methods of materials under hot working conditions

International Nuclear Information System (INIS)

Rossard, C.

1976-01-01

The deformation under hot working conditions is defined and the purpose of laboratory tests is explained: strength, structure, hot-workability. The concepts of generalized stress strain and strain rate are introduced. These concepts find an interesting application in the equivalence principle. The different testing methods (tension, compression, torsion) and their possibilities are reviewed. The softening mechanisms are recalled: dynamic recovery and recrystallization, static and post-dynamic recrystallization. To explain the possibilities of simulation tests in hot working conditions, some examples are given: the evaluation of the stress-strain relationship (effect of the mechanical and thermal history); the determination of structural behavior (quenching, controled cooling law, decomposition kinetics) [fr

An innovative exercise method to simulate orbital EVA work - Applications to PLSS automatic controls

Science.gov (United States)

Lantz, Renee; Vykukal, H.; Webbon, Bruce

1987-01-01

An exercise method has been proposed which may satisfy the current need for a laboratory simulation representative of muscular, cardiovascular, respiratory, and thermoregulatory responses to work during orbital extravehicular activity (EVA). The simulation incorporates arm crank ergometry with a unique body support mechanism that allows all body position stabilization forces to be reacted at the feet. By instituting this exercise method in laboratory experimentation, an advanced portable life support system (PLSS) thermoregulatory control system can be designed to more accurately reflect the specific work requirements of orbital EVA.

A collaborative design method to support integrated care. An ICT development method containing continuous user validation improves the entire care process and the individual work situation

Science.gov (United States)

Scandurra, Isabella; Hägglund, Maria

2009-01-01

Introduction Integrated care involves different professionals, belonging to different care provider organizations and requires immediate and ubiquitous access to patient-oriented information, supporting an integrated view on the care process [1]. Purpose To present a method for development of usable and work process-oriented information and communication technology (ICT) systems for integrated care. Theory and method Based on Human-computer Interaction Science and in particular Participatory Design [2], we present a new collaborative design method in the context of health information systems (HIS) development [3]. This method implies a thorough analysis of the entire interdisciplinary cooperative work and a transformation of the results into technical specifications, via user validated scenarios, prototypes and use cases, ultimately leading to the development of appropriate ICT for the variety of occurring work situations for different user groups, or professions, in integrated care. Results and conclusions Application of the method in homecare of the elderly resulted in an HIS that was well adapted to the intended user groups. Conducted in multi-disciplinary seminars, the method captured and validated user needs and system requirements for different professionals, work situations, and environments not only for current work; it also aimed to improve collaboration in future (ICT supported) work processes. A holistic view of the entire care process was obtained and supported through different views of the HIS for different user groups, resulting in improved work in the entire care process as well as for each collaborating profession [4].

Method for restoring contaminants to base levels in previously leached formations

International Nuclear Information System (INIS)

Strom, E.T.; Espencheid, W.F.

1983-01-01

The present invention relates to a method for restoring to environmentally acceptable levels the soluble contaminants in a subterranean formation that has been subjected to oxidative leaching. The contaminants are defined as those ionic species that when subjected to calcium ions form precipitates which are insoluble in the formation fluids. In accordance with the present invention, soluble calcium values are introduced into the formation. The level of contaminants is monitored and when such reaches the desired level, the introduction of soluble calcium values is stopped. The introduction of calcium values may be achieved in several ways one of which is to inject into the formation an aqueous solution containing therein solubilized calcium values. Another method of introducing calcium values into a formation, is to inject into the formation an aqueous solution containing carbon dioxide to solubilize calcium values, such as calcium carbonates, found in the formation

[Shift Work among Men and Women on the Threshold to Higher Working Age - Working Conditions and Health Status].

Science.gov (United States)

Leser, C; Tisch, A; Tophoven, S

2016-11-01

Background: The number of older employees in shift and night work has increased significantly in recent years. Furthermore, the proportion of women in shift and night work has increased markedly. This is due to the aging workforce and the expansion of shift work in the tertiary sector. Previous research shows that shift work is often associated with health risks. Against this background, the aim of the present study is to examine the situation of working men and women on the threshold to higher working age with regard to the relationship between shift work and physical health. Methods: We employed data from the study "lidA - leben in der Arbeit" German Cohort Study on Work, Age and Health, a survey of the German baby boom cohorts born in 1959 and 1965 (n=5 637). Linear regression models are used to study the effect of shift work - with and without night work - and of further work exposures on the baby boomers' physical health status. The models control for sleep and health-related behaviour and are stratified by gender. Among women, also the scope of work was taken into account. Results: The results show that male shift workers are burdened by their on average lower occupational status and by physical exposure; female shift workers additionally suffer from high personal effort and low rewards and female part-time shift workers also from overcommitment. Conclusion: Working conditions of shift workers are strongly characterised by work stress. In order to preserve aging shift workers' work ability, some organisational measures seem necessary. In this context, occupational safety and health management as well as opportunities for recovery and encouraging leadership should be considered. © Georg Thieme Verlag KG Stuttgart · New York.

Characterization of working iron Fischer-Tropsch catalysts using quantitative diffraction methods

Science.gov (United States)

Mansker, Linda Denise

This study presents the results of the ex-situ characterization of working iron Fischer-Tropsch synthesis (F-TS) catalysts, reacted hundreds of hours at elevated pressures, using a new quantitative x-ray diffraction analytical methodology. Compositions, iron phase structures, and phase particle morphologies were determined and correlated with the observed reaction kinetics. Conclusions were drawn about the character of each catalyst in its most and least active state. The identity of the active phase(s) in the Fe F-TS catalyst has been vigorously debated for more than 45 years. The highly-reduced catalyst, used to convert coal-derived syngas to hydrocarbon products, is thought to form a mixture of oxides, metal, and carbides upon pretreatment and reaction. Commonly, Soxhlet extraction is used to effect catalyst-product slurry separation; however, the extraction process could be producing irreversible changes in the catalyst, contributing to the conflicting results in the literature. X-ray diffraction doesn't require analyte-matrix separation before analysis, and can detect trace phases down to 300 ppm/2 nm; thus, working catalyst slurries could be characterized as-sampled. Data were quantitatively interpreted employing first principles methods, including the Rietveld polycrystalline structure method. Pretreated catalysts and pure phases were examined experimentally and modeled to explore specific behavior under x-rays. Then, the working catalyst slurries were quantitatively characterized. Empirical quantitation factors were calculated from experimental data or single crystal parameters, then validated using the Rietveld method results. In the most active form, after pretreatment in H 2 or in CO at Pambient, well-preserved working catalysts contained significant amounts of Fe7C3 with trace alpha-Fe, once reaction had commenced at elevated pressure. Amounts of Fe3O 4 were constant and small, with carbide dpavg 65 wt%, regardless of pretreatment gas and pressure, with

Previous Employment and Job Satisfaction Conditions: The Case of Regional Administration

Science.gov (United States)

Amalia, Myronaki; Nikolaos, Antonakas

2009-08-01

In the present work we study the different dimensions of satisfaction and the way of constitution of satisfaction of an important sample of the employees in the Regional administration of Crete and in their connection with the variable of the previous employment. We found statistically important differences for the components of satisfaction from the life, collaboration in and outside from the department, in the social satisfaction and the variable of the years in the service (labour group with satisfaction than the other previous employment groups. In the other hand the group with many years in the service presents bigger satisfaction than the other groups. Finally, is important to note that the sample present some interesting characteristics.

Psychosocial work environment factors and weight change

DEFF Research Database (Denmark)

Gram Quist, Helle; Christensen, Ulla; Christensen, Karl Bang

2013-01-01

BACKGROUND: Lifestyle variables may serve as important intermediate factors between psychosocial work environment and health outcomes. Previous studies, focussing on work stress models have shown mixed and weak results in relation to weight change. This study aims to investigate psychosocial...... factors outside the classical work stress models as potential predictors of change in body mass index (BMI) in a population of health care workers. METHODS: A cohort study, with three years follow-up, was conducted among Danish health care workers (3982 women and 152 men). Logistic regression analyses...... predicted weight loss among men. Associations were generally weak, with the exception of quality of leadership, age, and cohabitation. CONCLUSION: This study of a single occupational group suggested a few new risk factors for weight change outside the traditional work stress models....

Green Building Premium Cost Analysis in Indonesia Using Work Breakdown Structure Method

Science.gov (United States)

Basten, V.; Latief, Y.; Berawi, M. A.; Riswanto; Muliarto, H.

2018-03-01

The concept of green building in the construction industry is indispensable for mitigating environmental issues such as waste, pollution, and carbon emissions. There are some countries that have Green Building rating tools. Indonesia particularly is the country which has Greenship rating tools but the number of Green Building is relatively low. Development of building construction is depended on building investors or owner initiation, so this research is conducted to get the building aspects that have significant effect on the attractiveness using The Green Building Concept. The method in this research is work breakdown structure method that detailing the green building activities. The particular activities will be processed to get the cost elements for the green building achievement that it was targeted to improve better than conventional building. The final result of the study was a very significant work package on green building construction in the city of Indonesia case study.

WORKING POSTURE ANALYSIS AND DESIGN USING RULA (RAPID UPPER LIMB ASSESSMENT METHOD IN PRODUCTION PROCESS AT PT. INDANA PAINT

Directory of Open Access Journals (Sweden)

Yongky Kusnandar Djiono

2013-12-01

Full Text Available Working posture can affect the comfort and productivity of labor in doing manual work. In this study, RULA method is used to determine the risk level of musculoskeletal disorders (MSDs injury in the production process at PT. Indana Paint (consists of mixing and packaging steps for water-based paint, solvent-based paint, and base paint production, and then given proposed improvements to reduce the risk level. Method used in this research is direct observation and video recording of every work element to determine some awkward postures that will be assessed using RULA method. Thirty awkward postures are found, there are 7 working posture (23.3% have low risk level, 11 working posture (36.7% have medium risk level, and 12 working posture (40% have high risk level. Proposed improvements given is to brief the workers on appropriate lifting technique and working methods, adding mechanical aids for handling drums, and working position height adjustment.

The Complexities of Family Caregiving at Work: A Mixed-Methods Study.

Science.gov (United States)

Gaugler, Joseph E; Pestka, Deborah L; Davila, Heather; Sales, Rebecca; Owen, Greg; Baumgartner, Sarah A; Shook, Rocky; Cunningham, Jane; Kenney, Maureen

2018-01-01

The current project examined the impact of caregiving and caregiving-work conflict on employees' well-being. A sequential explanatory mixed-methods design (QUAN→qual) was utilized, and a total of 880 employees from a large health-care plan employer completed an online survey. Forty-five caregivers who completed the survey also participated in one of the five focus groups held 1 to 2 months later. Employed caregivers were significantly ( p < .05) more likely to indicate poorer physical and mental health than noncaregivers; among caregivers ( n = 370), caregiving-work conflict emerged as the most significant predictor of well-being and fully mediated the empirical relationship between burden and well-being. The focus group findings complemented the quantitative results; many of the challenges employed caregivers experience stem from their ability or inability to effectively balance their employment and caregiving roles. The results suggest the need to focus on caregiving-work conflict when constructing new or translating existing evidence-based caregiver interventions.

Men's health promotion interventions: what have we learned from previous programmes.

Science.gov (United States)

Robertson, Steve; Witty, Karl; Zwolinsky, Steve; Day, Rhiannon

2013-11-01

Concern persists in health-related literature about men's reduced life expectancy and higher premature death rates; this is often linked to difficulties in engaging with men as a client group. However, some innovative projects and programmes, often led by health visitors or other community based nurses, have developed successful health promotion work with men. This article collates existing tacit knowledge (previous learning) about men's health interventions by integrating interview data from nine practitioners who have established such initiatives with data from 35 men's health project reports to consider 'what works'. Five themes stood out as being significant across the data reviewed: using the right setting (often outside statutory services); ensuring the right approach (drawing on male-specific interests and language); actively listening to what local men say; appropriate training (initial and ongoing) for those involved in such work; and partnership working with local community groups, businesses and statutory service providers. While not a panacea for working with any and all men, these themes form a good basis for successful engagement with men and align well with what a recent review of health visitor interventions suggest works in helping bridge service provision-uptake gaps.

Methods for testing transport models

International Nuclear Information System (INIS)

Singer, C.; Cox, D.

1993-01-01

This report documents progress to date under a three-year contract for developing ''Methods for Testing Transport Models.'' The work described includes (1) choice of best methods for producing ''code emulators'' for analysis of very large global energy confinement databases, (2) recent applications of stratified regressions for treating individual measurement errors as well as calibration/modeling errors randomly distributed across various tokamaks, (3) Bayesian methods for utilizing prior information due to previous empirical and/or theoretical analyses, (4) extension of code emulator methodology to profile data, (5) application of nonlinear least squares estimators to simulation of profile data, (6) development of more sophisticated statistical methods for handling profile data, (7) acquisition of a much larger experimental database, and (8) extensive exploratory simulation work on a large variety of discharges using recently improved models for transport theories and boundary conditions. From all of this work, it has been possible to define a complete methodology for testing new sets of reference transport models against much larger multi-institutional databases

Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

Energy Technology Data Exchange (ETDEWEB)

Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

2010-12-29

This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release with unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway

Changes in work affect in response to lunchtime walking in previously physically inactive employees: A randomized trial.

Science.gov (United States)

Thøgersen-Ntoumani, C; Loughren, E A; Kinnafick, F-E; Taylor, I M; Duda, J L; Fox, K R

2015-12-01

Physical activity may regulate affective experiences at work, but controlled studies are needed and there has been a reliance on retrospective accounts of experience. The purpose of the present study was to examine the effect of lunchtime walks on momentary work affect at the individual and group levels. Physically inactive employees (N = 56; M age = 47.68; 92.86% female) from a large university in the UK were randomized to immediate treatment or delayed treatment (DT). The DT participants completed both a control and intervention period. During the intervention period, participants partook in three weekly 30-min lunchtime group-led walks for 10 weeks. They completed twice daily affective reports at work (morning and afternoon) using mobile phones on two randomly chosen days per week. Multilevel modeling was used to analyze the data. Lunchtime walks improved enthusiasm, relaxation, and nervousness at work, although the pattern of results differed depending on whether between-group or within-person analyses were conducted. The intervention was effective in changing some affective states and may have broader implications for public health and workplace performance. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Computer-aided method of airborne uranium in working areas

International Nuclear Information System (INIS)

Dagen, E.; Ringel, V.; Rossbach, H.

1981-09-01

The described procedure allows the routine determination of uranium aerosols with low personnel and technical efforts. The activity deposited on the filters is measured automatically twice a night. The computerized evaluation, including the elimination of radon and thoron daughter products, is made off-line with the aid of the code ULK1. The results are available at the beginning of the following working day and can be used for radiation protection planning. The sensitivity of the method of eliminating the airborne natural activity is 4 times less than that of measurements after its complete decay. This, however, is not of significance for radiation protection purposes

Investigating the relationship between work values and work ethics: A South African perspective

Directory of Open Access Journals (Sweden)

Petronella Jonck

2017-02-01

Full Text Available Orientation: As a result of the proliferation of unethical behaviour in the workplace, the study of work ethics has received new impetus. Research purpose: The research study sought to determine the relationship between work ethics and work values, with the objective of determining whether work ethics statistically significantly predict work values. Motivation for the study: As work ethics (i.e. behavioural intent are a determinant of work values (i.e. overt behaviour, researchers are investigating their potential in preventing unethical behaviour. Research design, approach and method: A descriptive quantitative research design was employed in the study. A survey was conducted using the Multidimensional Work Ethic Profile and the Values Scale, which in previous studies have produced acceptable Cronbach’s alpha coefficients. Data were collected from 301 respondents in one geographical area in South Africa. Main findings: Work values did not appear to be highly esteemed by respondents, as only 6 of the 22 dimensions had a positive score. However, all seven dimensions of work ethics had positive scores. A negative correlation was found between work ethics and work values. In addition, work ethics predicted 9% of the variance in work values, providing sufficient evidence to accept the postulated research hypothesis. Practical implications: The findings of the study could be used by human resource managers to promote ethical behaviour, by focusing not only on work ethics but also on the relationship between work ethics and work values. Contribution: The study provides evidence of a relationship between work ethics and work behaviours, such as work values, within the South African context, and it thus addresses a research gap in this area.

Development of working methods used inside reactor pressure vessel at Oskarshamn from the radiation protection point of view

International Nuclear Information System (INIS)

Solstrand, C.

2005-01-01

When performing maintenance and repair work in the beginning of 1970's conventional work tools and working methods mostly were used. The focus was on how to protect workers sufficiently in a proper way to keep the doses ALARA. During the last years the focus has turned more towards construction of special work tools in order to minimise personnel doses without any special arrangements for radiation shielding. Three examples will be presented to show that the optimisation of radiation protection can lead to the development of work tools and working methods, reducing the doses, time and money. (author)

Method for linking a media work to perform an action, involves linking an electronic media work with a reference electronic media work identifier associated with a reference electronic media work using an approximate neighbor search

DEFF Research Database (Denmark)

2016-01-01

A computer-implemented method including the steps of: receiving, by a computer system including at least one computer, a media work uploaded from a first electronic device; receiving, by the computer system from a second electronic device, a tag associated with the media work having a media work...... identifier; storing, by the computer system, the media work identifier and the associated tag; obtaining, by the computer system from a third electronic device, a query related to the associated tag; correlating, by the computer system, the query with associated information related to an action...... to be performed; and providing, from the computer system to the third electronic device, the associated information to be used in performing the action....

[Work organisation improvement methods applied to activities of Blood Transfusion Establishments (BTE): Lean Manufacturing, VSM, 5S].

Science.gov (United States)

Bertholey, F; Bourniquel, P; Rivery, E; Coudurier, N; Follea, G

2009-05-01

Continuous improvement of efficiency as well as new expectations from customers (quality and safety of blood products) and employees (working conditions) imply constant efforts in Blood Transfusion Establishments (BTE) to improve work organisations. The Lean method (from "Lean" meaning "thin") aims at identifying wastages in the process (overproduction, waiting, over-processing, inventory, transport, motion) and then reducing them in establishing a mapping of value chain (Value Stream Mapping). It consists in determining the added value of each step of the process from a customer perspective. Lean also consists in standardizing operations while implicating and responsabilizing all collaborators. The name 5S comes from the first letter of five operations of a Japanese management technique: to clear, rank, keep clean, standardize, make durable. The 5S method leads to develop the team working inducing an evolution of the way in the management is performed. The Lean VSM method has been applied to blood processing (component laboratory) in the Pays de la Loire BTE. The Lean 5S method has been applied to blood processing, quality control, purchasing, warehouse, human resources and quality assurance in the Rhône-Alpes BTE. The experience returns from both BTE shows that these methods allowed improving: (1) the processes and working conditions from a quality perspective, (2) the staff satisfaction, (3) the efficiency. These experiences, implemented in two BTE for different processes, confirm the applicability and usefulness of these methods to improve working organisations in BTE.

A method for work modeling at complex systems: towards applying information systems in family health care units.

Science.gov (United States)

Jatobá, Alessandro; de Carvalho, Paulo Victor R; da Cunha, Amauri Marques

2012-01-01

Work in organizations requires a minimum level of consensus on the understanding of the practices performed. To adopt technological devices to support the activities in environments where work is complex, characterized by the interdependence among a large number of variables, understanding about how work is done not only takes an even greater importance, but also becomes a more difficult task. Therefore, this study aims to present a method for modeling of work in complex systems, which allows improving the knowledge about the way activities are performed where these activities do not simply happen by performing procedures. Uniting techniques of Cognitive Task Analysis with the concept of Work Process, this work seeks to provide a method capable of providing a detailed and accurate vision of how people perform their tasks, in order to apply information systems for supporting work in organizations.

What works with worked examples: Extending self-explanation and analogical comparison to synthesis problems

Science.gov (United States)

Badeau, Ryan; White, Daniel R.; Ibrahim, Bashirah; Ding, Lin; Heckler, Andrew F.

2017-12-01

The ability to solve physics problems that require multiple concepts from across the physics curriculum—"synthesis" problems—is often a goal of physics instruction. Three experiments were designed to evaluate the effectiveness of two instructional methods employing worked examples on student performance with synthesis problems; these instructional techniques, analogical comparison and self-explanation, have previously been studied primarily in the context of single-concept problems. Across three experiments with students from introductory calculus-based physics courses, both self-explanation and certain kinds of analogical comparison of worked examples significantly improved student performance on a target synthesis problem, with distinct improvements in recognition of the relevant concepts. More specifically, analogical comparison significantly improved student performance when the comparisons were invoked between worked synthesis examples. In contrast, similar comparisons between corresponding pairs of worked single-concept examples did not significantly improve performance. On a more complicated synthesis problem, self-explanation was significantly more effective than analogical comparison, potentially due to differences in how successfully students encoded the full structure of the worked examples. Finally, we find that the two techniques can be combined for additional benefit, with the trade-off of slightly more time on task.

Simplified web-based decision support method for traffic management and work zone analysis.

Science.gov (United States)

2015-06-01

Traffic congestion mitigation is one of the key challenges that transportation planners and operations engineers face when : planning for construction and maintenance activities. There is a wide variety of approaches and methods that address work : z...

Is Family-to-Work Interference Related to Co-Workers' Work Outcomes?

Science.gov (United States)

ten Brummelhuis, Lieke L.; Bakker, Arnold B.; Euwema, Martin C.

2010-01-01

Previous studies have convincingly shown that employees' family lives can affect their work outcomes. We investigate whether family-to-work interference (FWI) experienced by the employee also affects the work outcomes of a co-worker. We predict that the employee's FWI has an effect on the co-worker's outcomes through the crossover of positive and…

Isolating Age-Group Differences in Working Memory Load-Related Neural Activity: Assessing the Contribution of Working Memory Capacity Using a Partial-Trial fMRI Method

Science.gov (United States)

Bennett, Ilana J.; Rivera, Hannah G.; Rypma, Bart

2013-01-01

Previous studies examining age-group differences in working memory load-related neural activity have yielded mixed results. When present, age-group differences in working memory capacity are frequently proposed to underlie these neural effects. However, direct relationships between working memory capacity and working memory load-related activity have only been observed in younger adults. These relationships remain untested in healthy aging. Therefore, the present study examined patterns of working memory load-related activity in 22 younger and 20 older adults and assessed the contribution of working memory capacity to these load-related effects. Participants performed a partial-trial delayed response item recognition task during functional magnetic resonance imaging. In this task, participants encoded either 2 or 6 letters, maintained them during a delay, and then indicated whether a probe was present in the memory set. Behavioral results revealed faster and more accurate responses to load 2 versus 6, with age-group differences in this load condition effect for the accuracy measure. Neuroimaging results revealed one region (medial superior frontal gyrus) that showed age-group differences in load-related activity during the retrieval period, with less (greater) neural activity for the low versus high load condition in younger (older) adults. Furthermore, for older adults, load-related activity did not vary as a function of working memory capacity. Thus, working memory-related activity varies with healthy aging, but these patterns are not due solely to working memory capacity. Neurocognitive aging theories that feature capacity will need to account for these results. PMID:23357076

Isolating age-group differences in working memory load-related neural activity: assessing the contribution of working memory capacity using a partial-trial fMRI method.

Science.gov (United States)

Bennett, Ilana J; Rivera, Hannah G; Rypma, Bart

2013-05-15

Previous studies examining age-group differences in working memory load-related neural activity have yielded mixed results. When present, age-group differences in working memory capacity are frequently proposed to underlie these neural effects. However, direct relationships between working memory capacity and working memory load-related activity have only been observed in younger adults. These relationships remain untested in healthy aging. Therefore, the present study examined patterns of working memory load-related activity in 22 younger and 20 older adults and assessed the contribution of working memory capacity to these load-related effects. Participants performed a partial-trial delayed response item recognition task during functional magnetic resonance imaging. In this task, participants encoded either 2 or 6 letters, maintained them during a delay, and then indicated whether a probe was present in the memory set. Behavioral results revealed faster and more accurate responses to load 2 versus 6, with age-group differences in this load condition effect for the accuracy measure. Neuroimaging results revealed one region (medial superior frontal gyrus) that showed age-group differences in load-related activity during the retrieval period, with less (greater) neural activity for the low versus high load condition in younger (older) adults. Furthermore, for older adults, load-related activity did not vary as a function of working memory capacity. Thus, working memory-related activity varies with healthy aging, but these patterns are not due solely to working memory capacity. Neurocognitive aging theories that feature capacity will need to account for these results. Copyright © 2013 Elsevier Inc. All rights reserved.

An Improved Method for Sizing Standalone Photovoltaic Systems Using Generalized Regression Neural Network

Directory of Open Access Journals (Sweden)

Tamer Khatib

2014-01-01

Full Text Available In this research an improved approach for sizing standalone PV system (SAPV is presented. This work is an improved work developed previously by the authors. The previous work is based on the analytical method which faced some concerns regarding the difficulty of finding the model’s coefficients. Therefore, the proposed approach in this research is based on a combination of an analytical method and a machine learning approach for a generalized artificial neural network (GRNN. The GRNN assists to predict the optimal size of a PV system using the geographical coordinates of the targeted site instead of using mathematical formulas. Employing the GRNN facilitates the use of a previously developed method by the authors and avoids some of its drawbacks. The approach has been tested using data from five Malaysian sites. According to the results, the proposed method can be efficiently used for SAPV sizing whereas the proposed GRNN based model predicts the sizing curves of the PV system accurately with a prediction error of 0.6%. Moreover, hourly meteorological and load demand data are used in this research in order to consider the uncertainty of the solar energy and the load demand.

Daily spillover from family to work: A test of the work-home resources model.

Science.gov (United States)

Du, Danyang; Derks, Daantje; Bakker, Arnold B

2018-04-01

The present study examines a mediated moderation model of the day-level effects of family hassles and family-work spillover (affect and cognition) on the relationship between job resources and employees' flourishing at work. Based on the work-home resources model, the authors hypothesized that demands from one domain (family) induce repetitive thoughts or negative feelings about those problems, so that individuals are not able to function optimally and to make full use of contextual resources in the other domain (work). Multilevel analyses of 108 Chinese working parents' 366 daily surveys revealed that the relationship between morning job resources and afternoon flourishing was significantly positive when previous day family hassles were low; the relationship became nonsignificant when previous day family hassles were high. In addition, as predicted, daily rumination also attenuated the relationship between morning job resources and afternoon flourishing, whereas daily affect did not. Finally, the moderating effect of previous day family hassles was mediated by daily rumination. The findings contribute to spillover theories by revealing the roles of affective and cognitive spillover from family to work. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Monte Carlo method for random surfaces

International Nuclear Information System (INIS)

Berg, B.

1985-01-01

Previously two of the authors proposed a Monte Carlo method for sampling statistical ensembles of random walks and surfaces with a Boltzmann probabilistic weight. In the present paper we work out the details for several models of random surfaces, defined on d-dimensional hypercubic lattices. (orig.)

Radioisotopic methods for quality control of works and studies while constructing foundations and underground structures

International Nuclear Information System (INIS)

Smorodinov, M.I.

1980-01-01

The data on the use of radioisotope methods of quality control of various kinds of construction works when building foundations and underground constructions and when carrying out scientific research, are presented. Devices and equipment are described, their block diagrams are presented. The experience in using radioisotope devices to control the quality of construction works, is presented. The problems of economic effectivenes of works using radioisotope devices are solved

Work strain in decontamination of hot cells, 2

International Nuclear Information System (INIS)

Kinouchi, Nobuyuki; Ikezawa, Yoshio

1991-01-01

In decontamination of hot cells, the workers should wear suitable protective clothing to protect them from internal exposure and skin contamination. But such protective clothing causes some work strain, especially heat-stress. As a simple method to evaluate quantitative work strain, we used sweat rates of the wearers. In the previous paper, sweat rates for workers with two types of protective clothing were reported. In the present paper, sweat rates under severer working conditions are measured for three types: (1) pressure ventilated blouse; (2) full-face mask and polyethylene coverall; (3) full-face mask and vinyl anorak. The measured values for 65 subjects widely scatter from 0.2 to 2.5 l/h for all the protective clothing. Based on these values, the effects of protective clothing and working conditions (ambient temperature and humidity) on work strain are discussed. (author)

METHODS FOR LOCAL CHANGES IN THE PLASTIC DEFORMATION DIAGNOSTICS ON THE WORK FUNCTION

Directory of Open Access Journals (Sweden)

K. V. Panteleyev

2015-01-01

Full Text Available The paper describes the electronic work function measurements by the contact potential difference technique, and experimental demonstration of the possibility of these methods application for the stress-strain state of the surface layer of the metals and alloys. The techniques end examples of their application of localization of plastic deformation studies using the Kelvin probe are developed and present. The study topology of work function the deformed surface possible to determine the type of deformation and dynamics of

The Impact of Auditory Working Memory Training on the Fronto-Parietal Working Memory Network

Directory of Open Access Journals (Sweden)

Julia eSchneiders

2012-06-01

Full Text Available Working memory training has been widely used to investigate working memory processes. We have shown previously that visual working memory benefits only from intra-modal visual but not from across-modal auditory working memory training. In the present functional magnetic resonance imaging study we examined whether auditory working memory processes can also be trained specifically and which training-induced activation changes accompany theses effects. It was investigated whether working memory training with strongly distinct auditory materials transfers exclusively to an auditory (intra-modal working memory task or whether it generalizes to an (across-modal visual working memory task. We used an adaptive n-back training with tonal sequences and a passive control condition. The memory training led to a reliable training gain. Transfer effects were found for the (intra-modal auditory but not for the (across-modal visual 2-back task. Training-induced activation changes in the auditory 2-back task were found in two regions in the right inferior frontal gyrus. These effects confirm our previous findings in the visual modality and extends intra-modal effects to the auditory modality. These results might reflect increased neural efficiency in auditory working memory processes as in the right inferior frontal gyrus is frequently found in maintaining modality-specific auditory information. By this, these effects are analogical to the activation decreases in the right middle frontal gyrus for the visual modality in our previous study. Furthermore, task-unspecific (across-modal activation decreases in the visual and auditory 2-back task were found in the right inferior parietal lobule and the superior portion of the right middle frontal gyrus reflecting less demands on general attentional control processes. These data are in good agreement with across-modal activation decreases within the same brain regions on a visual 2-back task reported previously.

The Discipline's Escalating Whisper: Social Work and Black Men's Mental Health

Science.gov (United States)

Watkins, Daphne C.; Hawkins, Jaclynn; Mitchell, Jamie A.

2015-01-01

Objective: Though sparse in previous years, research on the mental health of Black men has recently experienced a gradual increase in social work journals. This article systematically organizes and critically examines peer-reviewed, social work evidence on the mental health of Black men. Methods: Twenty-two peer-reviewed articles from social work…

Nationwide survey of work environment, work-life balance and burnout among psychiatrists in Japan.

Directory of Open Access Journals (Sweden)

Wakako Umene-Nakano

Full Text Available BACKGROUND: Psychiatry has been consistently shown to be a profession characterised by 'high-burnout'; however, no nationwide surveys on this topic have been conducted in Japan. AIMS: The objective of this study was to estimate the prevalence of burnout and to ascertain the relationship between work environment satisfaction, work-life balance satisfaction and burnout among psychiatrists working in medical schools in Japan. METHOD: We mailed anonymous questionnaires to all 80 psychiatry departments in medical schools throughout Japan. Work-life satisfaction, work-environment satisfaction and social support assessments, as well as the Maslach Burnout Inventory (MBI, were used. RESULTS: Sixty psychiatric departments (75.0% responded, and 704 psychiatrists provided answers to the assessments and MBI. Half of the respondents (n = 311, 46.0% experienced difficulty with their work-life balance. Based on the responses to the MBI, 21.0% of the respondents had a high level of emotional exhaustion, 12.0% had a high level of depersonalisation, and 72.0% had a low level of personal accomplishment. Receiving little support, experiencing difficulty with work-life balance, and having less work-environment satisfaction were significantly associated with higher emotional exhaustion. A higher number of nights worked per month was significantly associated with higher depersonalisation. CONCLUSIONS: A low level of personal accomplishment was quite prevalent among Japanese psychiatrists compared with the results of previous studies. Poor work-life balance was related to burnout, and social support was noted to mitigate the impact of burnout.

Nationwide Survey of Work Environment, Work-Life Balance and Burnout among Psychiatrists in Japan

Science.gov (United States)

Umene-Nakano, Wakako; Kato, Takahiro A.; Kikuchi, Saya; Tateno, Masaru; Fujisawa, Daisuke; Hoshuyama, Tsutomu; Nakamura, Jun

2013-01-01

Background Psychiatry has been consistently shown to be a profession characterised by ‘high-burnout’; however, no nationwide surveys on this topic have been conducted in Japan. Aims The objective of this study was to estimate the prevalence of burnout and to ascertain the relationship between work environment satisfaction, work-life balance satisfaction and burnout among psychiatrists working in medical schools in Japan. Method We mailed anonymous questionnaires to all 80 psychiatry departments in medical schools throughout Japan. Work-life satisfaction, work-environment satisfaction and social support assessments, as well as the Maslach Burnout Inventory (MBI), were used. Results Sixty psychiatric departments (75.0%) responded, and 704 psychiatrists provided answers to the assessments and MBI. Half of the respondents (n = 311, 46.0%) experienced difficulty with their work-life balance. Based on the responses to the MBI, 21.0% of the respondents had a high level of emotional exhaustion, 12.0% had a high level of depersonalisation, and 72.0% had a low level of personal accomplishment. Receiving little support, experiencing difficulty with work-life balance, and having less work-environment satisfaction were significantly associated with higher emotional exhaustion. A higher number of nights worked per month was significantly associated with higher depersonalisation. Conclusions A low level of personal accomplishment was quite prevalent among Japanese psychiatrists compared with the results of previous studies. Poor work-life balance was related to burnout, and social support was noted to mitigate the impact of burnout. PMID:23418435

Previously unknown species of Aspergillus.

Science.gov (United States)

Gautier, M; Normand, A-C; Ranque, S

2016-08-01

The use of multi-locus DNA sequence analysis has led to the description of previously unknown 'cryptic' Aspergillus species, whereas classical morphology-based identification of Aspergillus remains limited to the section or species-complex level. The current literature highlights two main features concerning these 'cryptic' Aspergillus species. First, the prevalence of such species in clinical samples is relatively high compared with emergent filamentous fungal taxa such as Mucorales, Scedosporium or Fusarium. Second, it is clearly important to identify these species in the clinical laboratory because of the high frequency of antifungal drug-resistant isolates of such Aspergillus species. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently been shown to enable the identification of filamentous fungi with an accuracy similar to that of DNA sequence-based methods. As MALDI-TOF MS is well suited to the routine clinical laboratory workflow, it facilitates the identification of these 'cryptic' Aspergillus species at the routine mycology bench. The rapid establishment of enhanced filamentous fungi identification facilities will lead to a better understanding of the epidemiology and clinical importance of these emerging Aspergillus species. Based on routine MALDI-TOF MS-based identification results, we provide original insights into the key interpretation issues of a positive Aspergillus culture from a clinical sample. Which ubiquitous species that are frequently isolated from air samples are rarely involved in human invasive disease? Can both the species and the type of biological sample indicate Aspergillus carriage, colonization or infection in a patient? Highly accurate routine filamentous fungi identification is central to enhance the understanding of these previously unknown Aspergillus species, with a vital impact on further improved patient care. Copyright © 2016 European Society of Clinical Microbiology and

HOW TEACHERS EVALUATE THEIR WORK STYLE DEPENDING ON THE SUBJECT THEY TEACH AND YEARS OF WORK EXPERIENCE

Directory of Open Access Journals (Sweden)

Ranka Perućica

2017-06-01

Full Text Available In previous works we presented the studies that discussed how students evaluate their teachers and their style of teaching. To what extent their styles affect the students’ attitudes to teaching, learning, success, motivation and the like. In this work we have tried to point out how teachers assess their style of work, depending on the subject they teach and years of work experience. In addition, the aim of this study was to examine whether there are differences in teachers’ estimation of the teaching styles depending on the subject they teach and years of work experience. The study sample consisted of 120 teachers in the final grades of primary schools in the Sarajevo – Romania region. Teachers responded to questions assessing which of the statements given are related to them. The questionnaire was designed for research purposes with the three styles that are commonly used in the classroom to a democratic, autocratic and laissez - fair style. Reliability of the instrument was tested using Cronbach - alpha coefficient, and amounted to 0.73 democratic style, the autocratic 0.73, and 0.63 for the indifferent style. In the study, we used two methods: survey method and the method of theoretical analysis. The obtained results show that there is a statistically significant difference in teachers’ assessments of democratic and laissez - fair style usage, depending on the subject they teach, while there was no statistically significant difference when it comes to the autocratic style. The second part of our results shows that there is no difference in teachers’ assessments of work styles, depending on years of work experience. We hope that these results will contribute to the already existing research dealing with this subject.

Discrete event simulation of crop operations in sweet pepper in support of work method innovation

NARCIS (Netherlands)

Ooster, van 't Bert; Aantjes, Wiger; Melamed, Z.

2017-01-01

Greenhouse Work Simulation, GWorkS, is a model that simulates crop operations in greenhouses for the purpose of analysing work methods. GWorkS is a discrete event model that approaches reality as a discrete stochastic dynamic system. GWorkS was developed and validated using cut-rose as a case

RISK EVALUATION OF PIN JIG WORK UNIT IN SHIPBUILDING BY USING FUZZY AHP METHOD

Directory of Open Access Journals (Sweden)

Murat Ozkok

2015-03-01

Full Text Available Shipbuilding industry includes many different industry branches in itself so various kind of work accidents occur. These work accidents often cause serious injuries and also deaths. It is a crucial thing to prevent or minimize these accidents. In order to reduce work accidents in shipyards, the most hazardous activities are needed to be determined and then, shipyard management must work on it in order to remove these hazard sources. In this study, pin jig work unit, where the curved parts are mounted on adjustable pin jigs, was considered. At first, the work activities and operations of pin jig work station were identified and they were classified as main and sub risk criterions. Then, pair comparison scales were built and these risk criterions were evaluated by experts who have been working for a shipyard located in Turkey. As a result of the evaluations of the experts, the risk weights of the activities carried out at pin jig work unit were defined by using fuzzy AHP method. Therefore, it is aimed for the shipyard management to take some precautions at pinjig work unit on the risky operations before failures happen.

Work-related teaching and learning methods to foster generic skills in Higher Education. An Italian experience

Directory of Open Access Journals (Sweden)

Daniela Frison

2016-11-01

Full Text Available Within the framework of modernisation of higher education systems in Europe, universities are invited to go beyond a knowledge-based perspective focused on disciplinary approaches and to be more concentrated on encouraging generic skills to deal with today’s complex and unpredictable career paths. The literature about Work-Related Learning and Work-Integrated Learning offers evidence to research regarding contributions of work-related experiences to the development of generic skills. The first part of the article presents a literature review carried out following the matching among three main keywords: work-related learning, generic skills, and higher education. Resources focused on the integration/teaching of generic skills in formal curriculum or in co-curriculum work-related activities and they were collected in order to explore the link between work-related learning in higher education and the development of generic skills. The focus is to identify valuable considerations to improve teaching strategies and methods. The second part presents an Italian work-related experience developed within the course of “Organizational Intervention Research Methods,” which involved 22 master’s degree students. The work-related assignment will be described in addition to the content analysis process of the 22 collected texts and the findings about the development of generic skills.

Maximum Work of Free-Piston Stirling Engine Generators

Science.gov (United States)

Kojima, Shinji

2017-04-01

Using the method of adjoint equations described in Ref. [1], we have calculated the maximum thermal efficiencies that are theoretically attainable by free-piston Stirling and Carnot engine generators by considering the work loss due to friction and Joule heat. The net work done by the Carnot cycle is negative even when the duration of heat addition is optimized to give the maximum amount of heat addition, which is the same situation for the Brayton cycle described in our previous paper. For the Stirling cycle, the net work done is positive, and the thermal efficiency is greater than that of the Otto cycle described in our previous paper by a factor of about 2.7-1.4 for compression ratios of 5-30. The Stirling cycle is much better than the Otto, Brayton, and Carnot cycles. We have found that the optimized piston trajectories of the isothermal, isobaric, and adiabatic processes are the same when the compression ratio and the maximum volume of the same working fluid of the three processes are the same, which has facilitated the present analysis because the optimized piston trajectories of the Carnot and Stirling cycles are the same as those of the Brayton and Otto cycles, respectively.

Method for determining the work hardening function to describe plasticity of metals

International Nuclear Information System (INIS)

Wilkins, M.L.

1978-01-01

A method for obtaining a constitutive relation that relates the flow stress to the equivalent plastic strain is developed. The method uses simple tension test data to suggest a functional form. This form is then used as a constitutive model in a computer program that simulates the tension test. The calculated results are compared with the experimental results and the functional form is refined until agreement is obtained between calculations and experiments. The importance of knowing the relationship between the flow stress and the plastic strain is discussed. A work hardening function is calibrated for 6061 T6 aluminum

The contribution from psychological, social, and organizational work factors to risk of disability retirement

DEFF Research Database (Denmark)

Knardahl, Stein; Johannessen, Håkon A.; Sterud, Tom

2017-01-01

Background: Previous studies indicate that psychological, social, and organizational factors at work contribute to health, motivation, absence from work, and functional ability. The objective of the study was to assess the current state of knowledge of the contribution of psychological, social, a...... social support from ones superior. Conclusions: Psychological and organizational factors at work contribute to disability retirement with the most robust evidence for the role of work control. We recommend the measurement of specific exposure factors in future studies.......Background: Previous studies indicate that psychological, social, and organizational factors at work contribute to health, motivation, absence from work, and functional ability. The objective of the study was to assess the current state of knowledge of the contribution of psychological, social......, and organizational factors to disability retirement by a systematic review and meta-analyses. Methods: Data sources: A systematic literature search for studies of retirement due to disability in Medline, Embase, and PsychINFO was performed. Reference lists of relevant articles were hand-searched for additional...

Restoration of fMRI Decodability Does Not Imply Latent Working Memory States

Science.gov (United States)

Schneegans, Sebastian; Bays, Paul M.

2018-01-01

Recent imaging studies have challenged the prevailing view that working memory is mediated by sustained neural activity. Using machine learning methods to reconstruct memory content, these studies found that previously diminished representations can be restored by retrospective cueing or other forms of stimulation. These findings have been interpreted as evidence for an activity-silent working memory state that can be reactivated dependent on task demands. Here, we test the validity of this conclusion by formulating a neural process model of working memory based on sustained activity and using this model to emulate a spatial recall task with retrocueing. The simulation reproduces both behavioral and fMRI results previously taken as evidence for latent states, in particular the restoration of spatial reconstruction quality following an informative cue. Our results demonstrate that recovery of the decodability of an imaging signal does not provide compelling evidence for an activity-silent working memory state. PMID:28820674

Functional heterogeneity within Broca's area during verbal working memory.

Science.gov (United States)

Chein, J M; Fissell, K; Jacobs, S; Fiez, J A

2002-12-01

In previous fMRI research, we found that two subregions of the left inferior frontal cortex showed distinct patterns of activity during a verbal working memory task. Specifically, a more dorsal region tracked with performance, while a more ventral region was sensitive to lexical status. To test the veracity of this finding, we developed a new method for meta-analysis of neuroimaging results. In this method, Gaussian probability distributions are formed around stereotaxic coordinates obtained from published neuroimaging studies. These probability distributions are then combined to identify regions of convergence across studies. When this method was applied to prior studies of working memory, the results largely paralleled those from earlier reviews of the literature on working memory, but also confirmed our empirical findings showing distinct foci within Broca's area. Further application of this meta-analytic technique substantiated the dissociation in these regions for performance and sublexical processing. These results help to validate a novel approach for meta-analysis of neuroimaging findings that avoids many of the subjective assumptions involved in alternative approaches.

Working methods experimentation: Bauzot deposit, Bauzot and La Faye deposits - Empty room with initial thin veins sub-layers

International Nuclear Information System (INIS)

Paucard, A.

1959-01-01

The Bauzot deposit was one of the first small CEA workings, and thus served as a guinea-pig for the testing of several working methods. The lessons learned at Bauzot render the rapid choice of a suitable method for the working of large CEA deposits possible. Reprint from 2 papers published in 'Revue de l'Industrie Minerale', vol. 40, n. 12, dec 1958, and Nov 1958, p. 831-843 [fr

Long Working Hours in Korea: Based on the 2014 Korean Working Conditions Survey.

Science.gov (United States)

Park, Jungsun; Kim, Yangho; Han, Boyoung

2017-12-01

Long working hours adversely affect worker safety and health. In 2004, Korea passed legislation that limited the work week to 40 hours, in an effort to improve quality-of-life and increase business competitiveness. This regulation was implemented in stages, first for large businesses and then for small businesses, from 2004 to 2011. We previously reported that average weekly working hours decreased from 2006 to 2010, based on the Korean Working Conditions Survey. In the present study, we examine whether average weekly working hours continued to decrease in 2014 based on the 2014 Korean Working Conditions Survey. The results show that average weekly working hours among all groups of workers decreased in 2014 relative to previous years; however, self-employed individuals and employers (who are not covered by the new legislation) in the specific service sectors worked > 60 h/wk in 2014. The Korean government should prohibit employees from working excessive hours and should also attempt to achieve social and public consensus regarding work time reduction to improve the safety, health, and quality-of-life of all citizens, including those who are employers and self-employed.

Prevalent musculoskeletal pain as a correlate of previous exposure to torture

DEFF Research Database (Denmark)

Olsen, Dorte Reff; Montgomery, Edith; Bojholm, S

2006-01-01

AIM: To research possible associations between previous exposure to specific torture techniques and prevalent pain in the head and face, back, and feet. METHODS: 221 refugees, 193 males and 28 females, previously exposed to torture in their home country, were subject to a clinical interview...... was general abuse of the whole body (OR 5.64, 95% CI 1.93-16.45). CONCLUSION: In spite of many factors being potentially co-responsible for prevalent pain, years after the torture took place it presents itself as strongly associated with specific loci of pain, with generalized effects, and with somatizing....

Working hours and Work-Life Balance Satisfaction in Couples

OpenAIRE

Nathalie Georges; Dominique Méda; Danièle Trancart

2010-01-01

Over the past several years, many studies have highlighted the strategic nature of working hours, the way they are determined, their regularity and their predictability to judge the qualities of a job and how family life and work life are reconciled. Our results confirm those obtained by previous studies and clarify them, while also showing that both the working hours of the persons questioned and those of their spouse constitute a central variable. We will first review the results from the a...

Preoperative screening: value of previous tests.

Science.gov (United States)

Macpherson, D S; Snow, R; Lofgren, R P

1990-12-15

To determine the frequency of tests done in the year before elective surgery that might substitute for preoperative screening tests and to determine the frequency of test results that change from a normal value to a value likely to alter perioperative management. Retrospective cohort analysis of computerized laboratory data (complete blood count, sodium, potassium, and creatinine levels, prothrombin time, and partial thromboplastin time). Urban tertiary care Veterans Affairs Hospital. Consecutive sample of 1109 patients who had elective surgery in 1988. At admission, 7549 preoperative tests were done, 47% of which duplicated tests performed in the previous year. Of 3096 previous results that were normal as defined by hospital reference range and done closest to the time of but before admission (median interval, 2 months), 13 (0.4%; 95% CI, 0.2% to 0.7%), repeat values were outside a range considered acceptable for surgery. Most of the abnormalities were predictable from the patient's history, and most were not noted in the medical record. Of 461 previous tests that were abnormal, 78 (17%; CI, 13% to 20%) repeat values at admission were outside a range considered acceptable for surgery (P less than 0.001, frequency of clinically important abnormalities of patients with normal previous results with those with abnormal previous results). Physicians evaluating patients preoperatively could safely substitute the previous test results analyzed in this study for preoperative screening tests if the previous tests are normal and no obvious indication for retesting is present.

Outcomes With Edoxaban Versus Warfarin in Patients With Previous Cerebrovascular Events

DEFF Research Database (Denmark)

Rost, Natalia S; Giugliano, Robert P; Ruff, Christian T

2016-01-01

BACKGROUND AND PURPOSE: Patients with atrial fibrillation and previous ischemic stroke (IS)/transient ischemic attack (TIA) are at high risk of recurrent cerebrovascular events despite anticoagulation. In this prespecified subgroup analysis, we compared warfarin with edoxaban in patients with ver......BACKGROUND AND PURPOSE: Patients with atrial fibrillation and previous ischemic stroke (IS)/transient ischemic attack (TIA) are at high risk of recurrent cerebrovascular events despite anticoagulation. In this prespecified subgroup analysis, we compared warfarin with edoxaban in patients...... with versus without previous IS/TIA. METHODS: ENGAGE AF-TIMI 48 (Effective Anticoagulation With Factor Xa Next Generation in Atrial Fibrillation-Thrombolysis in Myocardial Infarction 48) was a double-blind trial of 21 105 patients with atrial fibrillation randomized to warfarin (international normalized ratio......). Because only HDER is approved, we focused on the comparison of HDER versus warfarin. RESULTS: Of 5973 (28.3%) patients with previous IS/TIA, 67% had CHADS2 (congestive heart failure, hypertension, age, diabetes, prior stroke/transient ischemic attack) >3 and 36% were ≥75 years. Compared with 15 132...

Primary prevention of cardio-metabolic diseases in general practice: a Dutch survey of attitudes and working methods of general practitioners.

NARCIS (Netherlands)

Nielen, M.M.J.; Assendelft, W.J.J.; Drenthen, A.J.M.; Hombergh, P. van den; Dis, I. van; Schellevis, F.G.

2010-01-01

BACKGROUND: To study the attitudes and working methods of general practitioners (GPs) in primary prevention of cardiovascular diseases, diabetes mellitus and chronic kidney diseases. METHODS: A questionnaire with questions about attitude and working methods in the primary prevention of

Students’ Satisfaction with the Group Work Method and its Performance Evaluation: A survey in an Italian University

Directory of Open Access Journals (Sweden)

Massimo Zedda

2017-07-01

Full Text Available Group Work Learning Method is a cooperative learning technique that has positive effects in learning: students’ active participation can increase both cognitive and social skills. Our work involved three cohorts of students of different years attending the same course at the University of Torino, Department of Psychology. The contents of the course were the same in all years, students were asked to form self-selected groups to find creative solutions to two cases regarding violent behavior in workplace. Satisfaction concerning this activity and the method to evaluate the performance of the activity were investigated. Findings confirm overall students’ satisfaction related to group work learning method. This satisfaction improves the scores in course and teacher skills satisfaction. About the evaluation, findings shown that students agreed teacher’s and peers’ evaluation of the performance.

direct method of analysis of an isotropic rectangular plate direct

African Journals Online (AJOL)

eobe

This work evaluates the static analysis of an isotropic rectangular plate with various the static analysis ... method according to Ritz is used to obtain the total potential energy of the plate by employing the used to ..... for rectangular plates analysis, as the behavior of the ... results obtained by previous research work that used.

Scalable fast multipole methods for vortex element methods

KAUST Repository

Hu, Qi

2012-11-01

We use a particle-based method to simulate incompressible flows, where the Fast Multipole Method (FMM) is used to accelerate the calculation of particle interactions. The most time-consuming kernelsâ\\'the Biot-Savart equation and stretching term of the vorticity equationâ\\'are mathematically reformulated so that only two Laplace scalar potentials are used instead of six, while automatically ensuring divergence-free far-field computation. Based on this formulation, and on our previous work for a scalar heterogeneous FMM algorithm, we develop a new FMM-based vortex method capable of simulating general flows including turbulence on heterogeneous architectures, which distributes the work between multi-core CPUs and GPUs to best utilize the hardware resources and achieve excellent scalability. The algorithm also uses new data structures which can dynamically manage inter-node communication and load balance efficiently but with only a small parallel construction overhead. This algorithm can scale to large-sized clusters showing both strong and weak scalability. Careful error and timing trade-off analysis are also performed for the cutoff functions induced by the vortex particle method. Our implementation can perform one time step of the velocity+stretching for one billion particles on 32 nodes in 55.9 seconds, which yields 49.12 Tflop/s. © 2012 IEEE.

Development of an evaluation method for the quality of NPP MCR operators' communication using Work Domain Analysis (WDA)

International Nuclear Information System (INIS)

Jang, Inseok; Park, Jinkyun; Seong, Poonghyun

2011-01-01

Research highlights: → No evaluation method is available for operators' communication quality in NPPs. → To model this evaluation method, the Work Domain Analysis (WDA) method was found. → This proposed method was applied to NPP MCR operators. → The quality of operators' communication can be evaluated with the propose method. - Abstract: The evolution of work demands has seen industrial evolution itself evolve into the computerization of these demands, making systems more complex. This field is now known as the Complex Socio-Technical System. As communication failures are problems associated with Complex Socio-Technical Systems, it has been discovered that communication failures are the cause of many incidents and accidents in various industries, including the nuclear, aerospace and railway industries. Despite the fact that there have been many studies on the severity of communication failures, there is no evaluation method for operators' communication quality in Nuclear Power Plants (NPPs). Therefore, the objectives of this study are to develop an evaluation method for the quality of NPP Main Control Room (MCR) operators' communication and to apply the proposed method to operators in a full-scope simulator. To develop the proposed method, the Work Domain Analysis (WDA) method is introduced. Several characteristics of WDA, including Abstraction Decomposition Space (ADS) and the diagonal of ADS are the important points in developing an evaluation method for the quality of NPP MCR operators' communication. In addition, to apply the proposed method, nine teams working in NPPs participated in a field simulation. The results of this evaluation reveal that operators' communication quality improved as a greater proportion of the components in the developed evaluation criteria were mentioned. Therefore, the proposed method could be useful for evaluating the communication quality in any complex system.

Bayesian methods for proteomic biomarker development

Directory of Open Access Journals (Sweden)

Belinda Hernández

2015-12-01

In this review we provide an introduction to Bayesian inference and demonstrate some of the advantages of using a Bayesian framework. We summarize how Bayesian methods have been used previously in proteomics and other areas of bioinformatics. Finally, we describe some popular and emerging Bayesian models from the statistical literature and provide a worked tutorial including code snippets to show how these methods may be applied for the evaluation of proteomic biomarkers.

Low-dose computed tomography image restoration using previous normal-dose scan

International Nuclear Information System (INIS)

Ma, Jianhua; Huang, Jing; Feng, Qianjin; Zhang, Hua; Lu, Hongbing; Liang, Zhengrong; Chen, Wufan

2011-01-01

Purpose: In current computed tomography (CT) examinations, the associated x-ray radiation dose is of a significant concern to patients and operators. A simple and cost-effective means to perform the examinations is to lower the milliampere-seconds (mAs) or kVp parameter (or delivering less x-ray energy to the body) as low as reasonably achievable in data acquisition. However, lowering the mAs parameter will unavoidably increase data noise and the noise would propagate into the CT image if no adequate noise control is applied during image reconstruction. Since a normal-dose high diagnostic CT image scanned previously may be available in some clinical applications, such as CT perfusion imaging and CT angiography (CTA), this paper presents an innovative way to utilize the normal-dose scan as a priori information to induce signal restoration of the current low-dose CT image series. Methods: Unlike conventional local operations on neighboring image voxels, nonlocal means (NLM) algorithm utilizes the redundancy of information across the whole image. This paper adapts the NLM to utilize the redundancy of information in the previous normal-dose scan and further exploits ways to optimize the nonlocal weights for low-dose image restoration in the NLM framework. The resulting algorithm is called the previous normal-dose scan induced nonlocal means (ndiNLM). Because of the optimized nature of nonlocal weights calculation, the ndiNLM algorithm does not depend heavily on image registration between the current low-dose and the previous normal-dose CT scans. Furthermore, the smoothing parameter involved in the ndiNLM algorithm can be adaptively estimated based on the image noise relationship between the current low-dose and the previous normal-dose scanning protocols. Results: Qualitative and quantitative evaluations were carried out on a physical phantom as well as clinical abdominal and brain perfusion CT scans in terms of accuracy and resolution properties. The gain by the use

Flux form Semi-Lagrangian methods for parabolic problems

Directory of Open Access Journals (Sweden)

Bonaventura Luca

2016-09-01

Full Text Available A semi-Lagrangian method for parabolic problems is proposed, that extends previous work by the authors to achieve a fully conservative, flux-form discretization of linear and nonlinear diffusion equations. A basic consistency and stability analysis is proposed. Numerical examples validate the proposed method and display its potential for consistent semi-Lagrangian discretization of advection diffusion and nonlinear parabolic problems.

Executive Functions and Working Memory Behaviours in Children with a Poor Working Memory

Science.gov (United States)

St. Clair-Thompson, Helen L.

2011-01-01

Previous research has suggested that working memory difficulties play an integral role in children's underachievement at school. However, working memory is just one of several executive functions. The extent to which problems in working memory extend to other executive functions is not well understood. In the current study 38 children with a poor…

Neutron autoradiography: working-out method and application in investigations of test paintings

International Nuclear Information System (INIS)

Kalicki, A.; Panczyk, E.; Rowinska, L.; Sartowska, B.; Walis, L.; Pytel, K.; Pytel, B.; Koziel, A.; Dabkowski, L.; Wierzchnicka, M.; Strzalkowski, L.; Ostrowski, T.

2001-01-01

Neutron-induced autoradiography was carried out at MARIA research reactor in Poland. The paintings were exposed to the thermal neutrons. As a result, the radionuclides emitting beta particles and gamma rays were created from some of the elements existing in the painting. Beta particles were detected during successive exposure to a series of X-ray medical-sensitive films. The obtained images--blackening of the films depends mainly on the nuclear characteristic of recorded radionuclides and exposure parameters. The main purpose of this work was to work out a method, build a special stand and test sample paintings using neutron autoradiography. Samples of paintings were investigated and according to the obtained results, optimum test parameters have been selected: neutron irradiation conditions and autoradiographs exposure conditions

Improvements on the seismic catalog previous to the 2011 El Hierro eruption.

Science.gov (United States)

Domínguez Cerdeña, Itahiza; del Fresno, Carmen

2017-04-01

Precursors from the submarine eruption of El Hierro (Canary Islands) in 2011 included 10,000 low magnitude earthquakes and 5 cm crustal deformation within 81 days previous to the eruption onset on the 10th October. Seismicity revealed a 20 km horizontal migration from the North to the South of the island and depths ranging from 10 and 17 km with deeper events occurring further South. The earthquakes of the seismic catalog were manually picked by the IGN almost in real time, but there has not been a subsequent revision to check for new non located events jet and the completeness magnitude for the seismic catalog have strong changes during the entire swarm due to the variable number of events per day. In this work we used different techniques to improve the quality of the seismic catalog. First we applied different automatic algorithms to detect new events including the LTA-STA method. Then, we performed a semiautomatic system to correlate the new P and S detections with known phases from the original catalog. The new detected earthquakes were also located using Hypoellipse algorithm. The resulting new catalog included 15,000 new events mainly concentrated in the last weeks of the swarm and we assure a completeness magnitude of 1.2 during the whole series. As the seismicity from the original catalog was already relocated using hypoDD algorithm, we improved the location of the new events using a master-cluster relocation. This method consists in relocating earthquakes towards a cluster of well located events instead of a single event as the master-event method. In our case this cluster correspond to the relocated earthquakes from the original catalog. Finally, we obtained a new equation for the local magnitude estimation which allow us to include corrections for each seismic station in order to avoid local effects. The resulting magnitude catalog has a better fit with the moment magnitude catalog obtained for the strong earthquakes of this series in previous studies

The impact of auditory working memory training on the fronto-parietal working memory network

OpenAIRE

Schneiders, Julia A.; Opitz, Bertram; Tang, Huijun; Deng, Yuan; Xie, Chaoxiang; Li, Hong; Mecklinger, Axel

2012-01-01

Working memory training has been widely used to investigate working memory processes. We have shown previously that visual working memory benefits only from intra-modal visual but not from across-modal auditory working memory training. In the present functional magnetic resonance imaging study we examined whether auditory working memory processes can also be trained specifically and which training-induced activation changes accompany theses effects. It was investigated whether working memory ...

A mixed methods study of emotional exhaustion: Energizing and depleting work within an innovative healthcare team.

Science.gov (United States)

Cain, Cindy L; Taborda-Whitt, Caitlin; Frazer, Monica; Schellinger, Sandra; White, Katie M; Kaasovic, Jason; Nelson, Brenda; Chant, Allison

2017-11-01

This mixed methods study documents emotional exhaustion experiences among care team members during the development of an innovative team approach for caring for adults with serious illness. A mixed methods study design was employed to examine depleting work experiences that may produce emotional exhaustion, and energizing aspects of the work that may increase meaningfulness of work, thus reducing emotional exhaustion. The population studied included team members involved in care for adults with serious illness (n = 18). Team members were surveyed quarterly over an 18-month period using the Maslach Burnout Inventory (MBI). The MBI measures burnout, defined as the inability to continue work because of the interactional toll of the work. Analyses of MBI data show that although overall levels of burnout are low, 89% of team members reported moderate/high levels of emotional exhaustion during at least one survey period. In order to understand the kinds of work experiences that may produce or ameliorate emotional exhaustion, qualitative interviews were also conducted with team members at the end of the 18-month period. Major qualitative findings indicate that disputes within the team, environmental pressures, and standardisation of meaningful work leave team members feeling depleted. Having authentic relationships with patients, working as a team, believing in the care model, and practicing autonomy and creativity help team members to restore their emotional energy. Supports for team members' well-being are critical for continued innovation. We conclude with recommendations for improving team members' well-being.

Introduction into scientific work methods-a necessity when performance-based codes are introduced

DEFF Research Database (Denmark)

Dederichs, Anne; Sørensen, Lars Schiøtt

The introduction of performance-based codes in Denmark in 2004 requires new competences from people working with different aspects of fire safety in the industry and the public sector. This abstract presents an attempt in reducing problems with handling and analysing the mathematical methods...... and CFD models when applying performance-based codes. This is done within the educational program "Master of Fire Safety Engineering" at the department of Civil Engineering at the Technical University of Denmark. It was found that the students had general problems with academic methods. Therefore, a new...

The prevalence of previous self-harm amongst self-poisoning patients in Sri Lanka

DEFF Research Database (Denmark)

Mohamed, Fahim; Perera, Aravinda; Wijayaweera, Kusal

2011-01-01

BACKGROUND: One of the most important components of suicide prevention strategies is to target people who repeat self-harm as they are a high risk group. However, there is some evidence that the incidence of repeat self-harm is lower in Asia than in the West. The objective of this study...... was to investigate the prevalence of previous self-harm among a consecutive series of self-harm patients presenting to hospitals in rural Sri Lanka. METHOD: Six hundred and ninety-eight self-poisoning patients presenting to medical wards at two hospitals in Sri Lanka were interviewed about their previous episodes...... of self-harm. RESULTS: Sixty-one (8.7%, 95% CI 6.7-11%) patients reported at least one previous episode of self-harm [37 (10.7%) male, 24 (6.8%) female]; only 19 (2.7%, 95% CI 1.6-4.2%) patients had made more than one previous attempt. CONCLUSION: The low prevalence of previous self-harm is consistent...

Ergonomics evaluation of work posture in OWAS method in Ballast mines

Directory of Open Access Journals (Sweden)

Nasl Seraji J

1999-08-01

Full Text Available In this study, musculoskeletal disorders incidents have been found through NMQ. Then, with the OWAS method the results have been analysed. In this thesis, we have studied the case in two different workshops of Ballast Production Company. The jobs were classified according to static load caused by poor work posture and recommendations for reducing the hurmful load were made. The study of the questionnaire showe that there is meaningful relation between work experience and Low Back Pain (LBP (P<3%. Meanwhile BMI (Body Mass Index is closely related to LBP (P<2%. However a relation was found between low back and back and shoulder pain complaints during recent one year and last one week with that of the existence of the pains, respectively P<2% and P<5%. Jobs related with repair and maintenance rates the first as regards static load on the muscloskeletal system. Cooking, digging operations, driving bullodozer, operation of stone crushing device, loaders and lorries rank respectively in order.

The Boston-area HASWIC Research Circle: an innovative participatory method for coloring in the picture of a special work environment.

Science.gov (United States)

Moir, Susan; Azaroff, Lenore S

2007-01-01

Recent qualitative studies have investigated some of the hazards affecting women in non-traditional trades such as construction. However, one-time interactions among researcher participants, and between researchers and participants, in standard settings such as focus groups and interviews, cannot provide the time, space, and relationships to fully explore tradeswomen's in-depth knowledge of their work environment. This study applied a Scandinavian method called the Research Circle to convene a group of experienced women construction workers repeatedly over a period of two years so they could collaborate with researchers in explaining workplace issues. The results both validated and expanded upon previous findings about health and safety for women in construction, including gender discrimination, lack of access to sanitary facilities, retaliation for reporting hazards and injuries, and inadequate training and equipment. Especially important, findings illustrate some of the complex hierarchical social structures involved in both female and male construction workers responding to hazardous conditions.

The impact of auditory working memory training on the fronto-parietal working memory network.

Science.gov (United States)

Schneiders, Julia A; Opitz, Bertram; Tang, Huijun; Deng, Yuan; Xie, Chaoxiang; Li, Hong; Mecklinger, Axel

2012-01-01

Working memory training has been widely used to investigate working memory processes. We have shown previously that visual working memory benefits only from intra-modal visual but not from across-modal auditory working memory training. In the present functional magnetic resonance imaging study we examined whether auditory working memory processes can also be trained specifically and which training-induced activation changes accompany theses effects. It was investigated whether working memory training with strongly distinct auditory materials transfers exclusively to an auditory (intra-modal) working memory task or whether it generalizes to a (across-modal) visual working memory task. We used adaptive n-back training with tonal sequences and a passive control condition. The memory training led to a reliable training gain. Transfer effects were found for the (intra-modal) auditory but not for the (across-modal) visual transfer task. Training-induced activation decreases in the auditory transfer task were found in two regions in the right inferior frontal gyrus. These effects confirm our previous findings in the visual modality and extents intra-modal effects in the prefrontal cortex to the auditory modality. As the right inferior frontal gyrus is frequently found in maintaining modality-specific auditory information, these results might reflect increased neural efficiency in auditory working memory processes. Furthermore, task-unspecific (amodal) activation decreases in the visual and auditory transfer task were found in the right inferior parietal lobule and the superior portion of the right middle frontal gyrus reflecting less demand on general attentional control processes. These data are in good agreement with amodal activation decreases within the same brain regions on a visual transfer task reported previously.

The impact of auditory working memory training on the fronto-parietal working memory network

Science.gov (United States)

Schneiders, Julia A.; Opitz, Bertram; Tang, Huijun; Deng, Yuan; Xie, Chaoxiang; Li, Hong; Mecklinger, Axel

2012-01-01

Working memory training has been widely used to investigate working memory processes. We have shown previously that visual working memory benefits only from intra-modal visual but not from across-modal auditory working memory training. In the present functional magnetic resonance imaging study we examined whether auditory working memory processes can also be trained specifically and which training-induced activation changes accompany theses effects. It was investigated whether working memory training with strongly distinct auditory materials transfers exclusively to an auditory (intra-modal) working memory task or whether it generalizes to a (across-modal) visual working memory task. We used adaptive n-back training with tonal sequences and a passive control condition. The memory training led to a reliable training gain. Transfer effects were found for the (intra-modal) auditory but not for the (across-modal) visual transfer task. Training-induced activation decreases in the auditory transfer task were found in two regions in the right inferior frontal gyrus. These effects confirm our previous findings in the visual modality and extents intra-modal effects in the prefrontal cortex to the auditory modality. As the right inferior frontal gyrus is frequently found in maintaining modality-specific auditory information, these results might reflect increased neural efficiency in auditory working memory processes. Furthermore, task-unspecific (amodal) activation decreases in the visual and auditory transfer task were found in the right inferior parietal lobule and the superior portion of the right middle frontal gyrus reflecting less demand on general attentional control processes. These data are in good agreement with amodal activation decreases within the same brain regions on a visual transfer task reported previously. PMID:22701418

The pathogenicity of genetic variants previously associated with left ventricular non-compaction

DEFF Research Database (Denmark)

Abbasi, Yeganeh; Jabbari, Javad; Jabbari, Reza

2016-01-01

BACKGROUND: Left ventricular non-compaction (LVNC) is a rare cardiomyopathy. Many genetic variants have been associated with LVNC. However, the number of the previous LVNC-associated variants that are common in the background population remains unknown. The aim of this study was to provide...... an updated list of previously reported LVNC-associated variants with biologic description and investigate the prevalence of LVNC variants in healthy general population to find false-positive LVNC-associated variants. METHODS AND RESULTS: The Human Gene Mutation Database and PubMed were systematically...... searched to identify all previously reported LVNC-associated variants. Thereafter, the Exome Sequencing Project (ESP) and the Exome Aggregation Consortium (ExAC), that both represent the background population, was searched for all variants. Four in silico prediction tools were assessed to determine...

METHODS FOR ORGANIZATION OF WORKING PROCESS FOR GAS-DIESEL ENGINE

Directory of Open Access Journals (Sweden)

G. A. Vershina

2017-01-01

Full Text Available Over the past few decades reduction in pollutant emissions has become one of the main directions for further deve- lopment of engine technology. Solution of such problems has led to implementation of catalytic post-treatment systems, new technologies of fuel injection, technology for regulated phases of gas distribution, regulated turbocharger system and, lately, even system for variable compression ratio of engine. Usage of gaseous fuel, in particular gas-diesel process, may be one of the means to reduce air pollution caused by toxic substances and meet growing environmental standards and regulations. In this regard, an analysis of methods for organization of working process for a gas-diesel engine has been conducted in the paper. The paper describes parameters that influence on the nature of gas diesel process, it contains graphics of specific total heat consumption according to ignition portion of diesel fuel and dependence of gas-diesel indices on advance angle for igni-tion portion injection of the diesel fuel. A modern fuel system of gas-diesel engine ГД-243 has been demonstrated in the pa- per. The gas-diesel engine has better environmental characteristics than engines running on diesel fuel or gasoline. According to the European Natural & bio Gas Vehicle Association a significant reduction in emissions is reached at a 50%-substitution level of diesel fuel by gas fuel (methane and in such a case there is a tendency towards even significant emission decrease. In order to ensure widespread application of gaseous fuel as fuel for gas-diesel process it is necessary to develop a new wor- king process, to improve fuel equipment, to enhance injection strategy and fuel supply control. A method for organization of working process for multi-fuel engine has been proposed on the basis of the performed analysis. An application has been submitted for a patent.

Direct-substitution method for studying second harmonic generation in arbitrary optical superlattices

Directory of Open Access Journals (Sweden)

Ying Chen

Full Text Available In this paper, we present the direct-substitution (DS method to study the second-harmonic generation (SHG in arbitrary one-dimensional optical superlattices (OS. Applying this method to Fibonacci and generalized Fibonacci systems, we obtain the relative intensity of SHG and compare them with previous works. We confirmed the validity of the proposed DS method by comparing our results of SHG in quasiperiodic Fibonacci OS with previous works using analytical Fourier transform method. Furthermore, the three-dimension SHG spectra obtained by DS method present the properties of SHG in Fibonacci OS more distinctly. What’s more important, the DS method demands very few limits and can be used to compute directly and conveniently the intensity of SHG in arbitrary OS where the quasi-phase-matching (QPM can be achieved. It shows that the DS method is powerful for the calculation of electric field and intensity of SHG and can help experimentalists conveniently to estimate the distributions of SHG in any designed polarized systems. Keywords: Second-harmonic generation, Direct-substitution, Fibonacci

37 CFR 201.20 - Methods of affixation and positions of the copyright notice on various types of works.

Science.gov (United States)

2010-07-01

..., device, fixed, machine, motion picture, pictorial, graphic, and sculptural works, and their variant forms...-readable copies (such as magnetic tapes or disks, punched cards, or the like, from which the work cannot.... (i) Pictorial, graphic, and sculptural works. The following constitute examples of acceptable methods...

The Effects of Psychosocial Factors on Work Accidents in Izmir Konak Municipality Cleaning Workers.

OpenAIRE

Aysun Akgun; Ahmet Soysal; Yucel Demiral

2010-01-01

AIM: The aim of this cross-sectional study was to investigate the relationship between psychosocial factors and work accidents among waste collector workers in Izmir Konak Municipality Cleaning Services Section. The study consisted 92 (%68) out of 135 workers of those accepted to participation. METHOD: face-to-face questionnaire were administered for data collection. Dependent variable was the work-related accident for previous six months. Independent variables were sociodemographic features,...

Computer analysis of multicircuit shells of revolution by the field method

International Nuclear Information System (INIS)

Cohen, G.A.

1975-01-01

The field method has been presented previously for shells of revolution with open branched meridians. The main purpose of the present paper is to extend this work to the case of meridians which contain circuits. Also, a new method for the treatment of arbitrary kinematic constraints is presented. (Auth.)

Development of evaluation method for the quality of NPP MCR operators' communication using work domain analysis (WDA)

International Nuclear Information System (INIS)

Jang, In Seok

2010-02-01

Evolution of work demands has changed industrial evolution to computerization which makes systems complex and complicated: this field is called Complex Socio-Technical Systems. As communication failure is one problem of Complex Socio-Technical Systems, it has been discovered that communication failure is the reason for many incidents and accidents in various industries, including the nuclear, aerospace and railway industries. Despite the fact that there have been many studies on the severity of communication failure, there is no evaluation method for operators' communication quality in NPPs. Therefore, the objectives of this study are to develop an evaluation method for the quality of NPP Main Control Room (MCR) operators' communication and to apply the proposed method to operators in a full-scope simulator. In order to develop the proposed method, the Work Domain Analysis (WDA) method is introduced. Several characteristic of WDA, such as Abstraction Decomposition Space (ADS) and the diagonal of ADS are the key points in developing an evaluation method for the quality of NPP MCR operators' communication. In addition, in order to apply the proposed method, nine teams working in NPPs participated in the field simulation. Evaluation results reveal that operators' communication quality was higher as larger portion of components in the developed evaluation criteria were mentioned. Therefore, the proposed method could be a useful one for evaluating the communication quality in any complex system. In order to verify that the proposed method is meaningful to evaluate communication quality, the evaluation results were further investigated with objective performance measures. Further investigation of the evaluation results also supports the idea that the proposed method can be used in evaluating communication quality

A Pilot Study of Working Memory and Academic Achievement in College Students with ADHD

Science.gov (United States)

Gropper, Rachel J.; Tannock, Rosemary

2009-01-01

Objective: To investigate working memory (WM), academic achievement, and their relationship in university students with attention-deficit/hyperactivity disorder (ADHD). Method: Participants were university students with previously confirmed diagnoses of ADHD (n = 16) and normal control (NC) students (n = 30). Participants completed 3…

INNOVATIVE FORMS SUPPORTING SAFE METHODS OF WORK IN SAFETY ENGINEERING FOR THE DEVELOPMENT OF INTELLIGENT SPECIALIZATIONS

Directory of Open Access Journals (Sweden)

Anna GEMBALSKA-KWIECIEŃ

2016-10-01

Full Text Available The article discusses innovative forms of participation of employees in the work safety system. It also presents the advantages of these forms of employees’ involvement. The aim of empirical studies was the analysis of their behavior and attitude towards health and safety at work. The issues considered in the article have a significant impact on the improvement of methods of prevention related to work safety and aided the creation of a healthy society.

Ubiquitous Working: Do Work Versus Non-work Environments Affect Decision-Making and Concentration?

Directory of Open Access Journals (Sweden)

Carolin P. Burmeister

2018-03-01

Full Text Available New communication technologies and mobile devices have enabled knowledge workers to work independently of location and in more than one fixed environment (ubiquitous working. Previous research shows that physical environments can influence cognition and work performance. We manipulated environment (i.e., a virtual office as a typical work environment compared to a virtual garden as a non-work environment and time pressure (i.e., inducing time pressure vs. no time pressure in order to investigate whether the environment influences decision-making and concentration. N = 109 students participated in this laboratory experiment. We posited (a that a work environment would activate a work-related schema which in turn would enhance concentration performance and make decisions more risky compared to non-work environments and (b that the environmental effect is more pronounced if time pressure is present compared to conditions where no time pressure is present. We found modest hypothesis-confirming main effects of environment on decision-making and concentration but no interaction effect with time pressure. As we used an innovative methodology that entails several limitations, future research is needed to give insights into the process and to investigate whether results hold true for all types of work settings, work demands, or work activities.

Ubiquitous Working: Do Work Versus Non-work Environments Affect Decision-Making and Concentration?

Science.gov (United States)

Burmeister, Carolin P; Moskaliuk, Johannes; Cress, Ulrike

2018-01-01

New communication technologies and mobile devices have enabled knowledge workers to work independently of location and in more than one fixed environment (ubiquitous working). Previous research shows that physical environments can influence cognition and work performance. We manipulated environment (i.e., a virtual office as a typical work environment compared to a virtual garden as a non-work environment ) and time pressure (i.e., inducing time pressure vs. no time pressure ) in order to investigate whether the environment influences decision-making and concentration. N = 109 students participated in this laboratory experiment. We posited (a) that a work environment would activate a work-related schema which in turn would enhance concentration performance and make decisions more risky compared to non-work environments and (b) that the environmental effect is more pronounced if time pressure is present compared to conditions where no time pressure is present. We found modest hypothesis-confirming main effects of environment on decision-making and concentration but no interaction effect with time pressure. As we used an innovative methodology that entails several limitations, future research is needed to give insights into the process and to investigate whether results hold true for all types of work settings, work demands, or work activities.

Implementation aspects of the Boundary Element Method including viscous and thermal losses

DEFF Research Database (Denmark)

Cutanda Henriquez, Vicente; Juhl, Peter Møller

2014-01-01

The implementation of viscous and thermal losses using the Boundary Element Method (BEM) is based on the Kirchhoff’s dispersion relation and has been tested in previous work using analytical test cases and comparison with measurements. Numerical methods that can simulate sound fields in fluids...

Organization and methods of radiation monitoring while working at nuclear critical assemblies

International Nuclear Information System (INIS)

Shishkin, G.V.; Komissarov, L.A.

1980-01-01

The organization and methods of environmental radiation monitoring while working at nuclear critical assemblies, are described. Necessary equipment for critical assemblies (signal and Ventilation systems, devices for recording accidental radiation levels of and for measuring radiation field distribution) and the personnel program of actions in case of nuclear accident. The dosimetric control at critical assemblies is usually ensured by telesystems. 8004-01 multi-channel dosimetric device is described as an example of such-system [ru

Previous bacterial infection affects textural quality parameters of heat-treated fillets from rainbow trout (Oncorhynchus mykiss)

DEFF Research Database (Denmark)

Ingerslev, Hans-Christian; Hyldig, Grethe; Przybylska, Dominika Alicja

2012-01-01

Sensory quality of fish meat is influenced by many parameters prior to slaughter. In the present study, it was examined if previous infections or damages in the muscle tissue influence product quality parameters in fish. Fillets from rainbow trout (Oncorhynchus mykiss) reared in seawater....... This article was the first to describe a correlation between previous infections in fish and changes in sensory-quality parameters. PRACTICAL APPLICATIONS. This work contributes with knowledge about sensory-quality parameters of fish meat after recovery from infections and physical-tissue damage. Because...... the results demonstrate an influence on the texture from previous disease, the practical potentials of the results are valuable for the aquaculture industry. In order to minimize the effects of previous diseases on the sensory quality regarding the texture, these fishes should be processed as cold...

[Evaluation methods in the work/stress correlations in law enforcement].

Science.gov (United States)

Magnavital, Nicola; Garbarino, Sergio; Siegrist, Johannes

2014-01-01

Stress in police: assessment methods. Police work is unanimously considered stressful. Prevention of stress in police is of the utmost importance, as a distressed officer could be hazardous for third parties. There is scientific evidence that the relationship between occupational stressors and their psychological and physical consequences can be described by Karasek's demand-control-support (DCS) model and the effort / reward imbalance (ERI) model of Siegrist. This study summarizes the results of surveys conducted using the DCS and ERI questionnaires.on police officers from the VI Mobile Unit of Genoa who were engaged in public order management at the G8 summit in L'Aquila in 2009. In spite of the high alert due to expected threats to public order during the G8 meeting, police officers were not affected by "distress". When the policemen were compared to other categories of workers, their stress levels were in the lowest range. In most cases, the personality profile of these workers did not differ substantially from that of the general population. There was an association between personality and stress response. The levels of perceived stress were significantly associated with absence from work. The prevalence of mental disorders in police officers was significantly lower than that of the general population. Occupational stress was associated with indicators of depression, anxiety and burnout. The DCS and ERI models yielded complementary results and proved to be effective in assessing the effects of stress in law enforcement. The extent of perceived stress does not directly depend on external events, but on the way in which these are handled: routine work may be more stressful than a single critical event. Special police forces are particularly resilient to stress, partly due to the characteristics and personality of individual officers, but mainly on account of their training. Occupational stress is associated with a lower level of psychological well-being and an

Work or family? : A study about work-life balance and availability for work and family in China

OpenAIRE

Karlberg, Julia; Lövgren, Felicia

2016-01-01

The purpose of this thesis is to gain a deeper understanding of how the Chinese prioritize between work and family and how the culture can affect it. Nowadays, availability and work-life balance are often mentioned in a Western context, in this thesis we want to bring it into a Chinese context instead. China has  the largest population in the world but there is not so much previous research in this field. Thus, it was of interest to us to do our research on the work-life balance and availabil...

Rivalry between the collective use of IT tools and working methods of design teams

NARCIS (Netherlands)

Otter, den A.F.H.J.; Pels, H.J.

2008-01-01

Nowadays a high variety of IT tools is available for communication purposes in design processes on individual and group level. Despite this, the exchange and sharing of design documents collectively in design and engineering teams might be limited mainly, due to habits, preferences, working methods

Detection of previously undiagnosed cases of COPD in a high-risk population identified in general practice

DEFF Research Database (Denmark)

Løkke, Anders; Ulrik, Charlotte Suppli; Dahl, Ronald

2012-01-01

Background and Aim: Under-diagnosis of COPD is a widespread problem. This study aimed to identify previously undiagnosed cases of COPD in a high-risk population identified through general practice. Methods: Participating GPs (n = 241) recruited subjects with no previous diagnosis of lung disease,...

Managing a work-life balance: the experiences of midwives working in a group practice setting.

Science.gov (United States)

Fereday, Jennifer; Oster, Candice

2010-06-01

To explore how a group of midwives achieved a work-life balance working within a caseload model of care with flexible work hours and on-call work. in-depth interviews were conducted and the data were analysed using a data-driven thematic analysis technique. Children, Youth and Women's Health Service (CYWHS) (previously Women's and Children's Hospital), Adelaide, where a midwifery service known as Midwifery Group Practice (MGP) offers a caseload model of care to women within a midwife-managed unit. 17 midwives who were currently working, or had previously worked, in MGP. analysis of the midwives' individual experiences provided insight into how midwives managed the flexible hours and on-call work to achieve a sustainable work-life balance within a caseload model of care. it is important for midwives working in MGP to actively manage the flexibility of their role with time on call. Organisational, team and individual structure influenced how flexibility of hours was managed; however, a period of adjustment was required to achieve this balance. the study findings offer a description of effective, sustainable strategies to manage flexible hours and on-call work that may assist other midwives working in a similar role or considering this type of work setting. Copyright 2008 Elsevier Ltd. All rights reserved.

Evaluating an mHealth App for Health and Well-Being at Work: Mixed-Method Qualitative Study

Science.gov (United States)

Wiezer, Noortje; Janssen, Joris H; Vink, Peter; Kraaij, Wessel

2018-01-01

Background To improve workers’ health and well-being, workplace interventions have been developed, but utilization and reach are unsatisfactory, and effects are small. In recent years, new approaches such as mobile health (mHealth) apps are being developed, but the evidence base is poor. Research is needed to examine its potential and to assess when, where, and for whom mHealth is efficacious in the occupational setting. To develop interventions for workers that actually will be adopted, insight into user satisfaction and technology acceptance is necessary. For this purpose, various qualitative evaluation methods are available. Objective The objectives of this study were to gain insight into (1) the opinions and experiences of employees and experts on drivers and barriers using an mHealth app in the working context and (2) the added value of three different qualitative methods that are available to evaluate mHealth apps in a working context: interviews with employees, focus groups with employees, and a focus group with experts. Methods Employees of a high-tech company and experts were asked to use an mHealth app for at least 3 weeks before participating in a qualitative evaluation. Twenty-two employees participated in interviews, 15 employees participated in three focus groups, and 6 experts participated in one focus group. Two researchers independently coded, categorized, and analyzed all quotes yielded from these evaluation methods with a codebook using constructs from user satisfaction and technology acceptance theories. Results Interviewing employees yielded 785 quotes, focus groups with employees yielded 266 quotes, and the focus group with experts yielded 132 quotes. Overall, participants muted enthusiasm about the app. Combined results from the three evaluation methods showed drivers and barriers for technology, user characteristics, context, privacy, and autonomy. A comparison between the three qualitative methods showed that issues revealed by experts

The ADO-nodal method for solving two-dimensional discrete ordinates transport problems

International Nuclear Information System (INIS)

Barichello, L.B.; Picoloto, C.B.; Cunha, R.D. da

2017-01-01

Highlights: • Two-dimensional discrete ordinates neutron transport. • Analytical Discrete Ordinates (ADO) nodal method. • Heterogeneous media fixed source problems. • Local solutions. - Abstract: In this work, recent results on the solution of fixed-source two-dimensional transport problems, in Cartesian geometry, are reported. Homogeneous and heterogeneous media problems are considered in order to incorporate the idea of arbitrary number of domain division into regions (nodes) when applying the ADO method, which is a method of analytical features, to those problems. The ADO-nodal formulation is developed, for each node, following previous work devoted to heterogeneous media problem. Here, however, the numerical procedure is extended to higher number of domain divisions. Such extension leads, in some cases, to the use of an iterative method for solving the general linear system which defines the arbitrary constants of the general solution. In addition to solve alternative heterogeneous media configurations than reported in previous works, the present approach allows comparisons with results provided by other metodologies generated with refined meshes. Numerical results indicate the ADO solution may achieve a prescribed accuracy using coarser meshes than other schemes.

The Role of Work-Integrated Learning in Student Preferences of Instructional Methods in an Accounting Curriculum

Science.gov (United States)

Abeysekera, Indra

2015-01-01

The role of work-integrated learning in student preferences of instructional methods is largely unexplored across the accounting curriculum. This study conducted six experiments to explore student preferences of instructional methods for learning, in six courses of the accounting curriculum that differed in algorithmic rigor, in the context of a…

Influence of work-related characteristics and work ability on changing employer or leaving the profession among nursing staff

NARCIS (Netherlands)

Rongen, Anne; Robroek, Suzan; van der Heijden, Beatrice; Schouteten, Roel L.J.; Hasselhorn, Hans Martin; Burdorf, Alex

2014-01-01

Aim To investigate how work-related characteristics and work ability influence nursing staff decisions to change employer or leave the profession. Background Previous cross-sectional studies have indicated that decreased work ability and unfavourable work-related characteristics are important

Development of the work function monitoring method for a converter of a negative ion source

International Nuclear Information System (INIS)

Yamaoka, Hitoshi; Sasao, Mamiko; Wada, Motoi; Ramos, H.J.

1988-07-01

A method to monitor the change in the work function of the converter surface in a self-extraction negative ion source is developed. The photoelectron emission from the Cs-Mo surface in a plasma is detected by irradiating surface with laser lights. Negative ions produced at the surface shows a strong correlation with the photoelectron current from the surface in hydrogen and helium discharges. The photoelectron current induced by the Ar + laser is used to detect the change in the cesium coverage, or the work function, while that by the dye laser is found to be suitable to confirm the region of the work function minimum. (author)

Paid work and unpaid work

DEFF Research Database (Denmark)

Bonke, Jens

Time-use information is preferably obtained from diaries, as this method is considered more reliable than information from questionnaires. The diary-technique seems to be unique in catching the rhythm of every day life and thereby the structuring of work and leisure during a well-defined and memo......Time-use information is preferably obtained from diaries, as this method is considered more reliable than information from questionnaires. The diary-technique seems to be unique in catching the rhythm of every day life and thereby the structuring of work and leisure during a well......-questions are asked about the time spent on paid work and unpaid/household work. The advantage of the latter technique is that it can easily be integrated into surveys. Thus the American National Survey of Families and Households (NSFH) already contains two waves, and a new wave for 2001-2002, which allows...

Kidnapping Detection and Recognition in Previous Unknown Environment

Directory of Open Access Journals (Sweden)

Yang Tian

2017-01-01

Full Text Available An unaware event referred to as kidnapping makes the estimation result of localization incorrect. In a previous unknown environment, incorrect localization result causes incorrect mapping result in Simultaneous Localization and Mapping (SLAM by kidnapping. In this situation, the explored area and unexplored area are divided to make the kidnapping recovery difficult. To provide sufficient information on kidnapping, a framework to judge whether kidnapping has occurred and to identify the type of kidnapping with filter-based SLAM is proposed. The framework is called double kidnapping detection and recognition (DKDR by performing two checks before and after the “update” process with different metrics in real time. To explain one of the principles of DKDR, we describe a property of filter-based SLAM that corrects the mapping result of the environment using the current observations after the “update” process. Two classical filter-based SLAM algorithms, Extend Kalman Filter (EKF SLAM and Particle Filter (PF SLAM, are modified to show that DKDR can be simply and widely applied in existing filter-based SLAM algorithms. Furthermore, a technique to determine the adapted thresholds of metrics in real time without previous data is presented. Both simulated and experimental results demonstrate the validity and accuracy of the proposed method.

Sacrococcygeal pilonidal disease: analysis of previously proposed risk factors

Directory of Open Access Journals (Sweden)

Ali Harlak

2010-01-01

Full Text Available PURPOSE: Sacrococcygeal pilonidal disease is a source of one of the most common surgical problems among young adults. While male gender, obesity, occupations requiring sitting, deep natal clefts, excessive body hair, poor body hygiene and excessive sweating are described as the main risk factors for this disease, most of these need to be verified with a clinical trial. The present study aimed to evaluate the value and effect of these factors on pilonidal disease. METHOD: Previously proposed main risk factors were evaluated in a prospective case control study that included 587 patients with pilonidal disease and 2,780 healthy control patients. RESULTS: Stiffness of body hair, number of baths and time spent seated per day were the three most predictive risk factors. Adjusted odds ratios were 9.23, 6.33 and 4.03, respectively (p<0.001. With an adjusted odds ratio of 1.3 (p<.001, body mass index was another risk factor. Family history was not statistically different between the groups and there was no specific occupation associated with the disease. CONCLUSIONS: Hairy people who sit down for more than six hours a day and those who take a bath two or less times per week are at a 219-fold increased risk for sacrococcygeal pilonidal disease than those without these risk factors. For people with a great deal of hair, there is a greater need for them to clean their intergluteal sulcus. People who engage in work that requires sitting in a seat for long periods of time should choose more comfortable seats and should also try to stand whenever possible.

Recovery, work-life balance and work experiences important to self-rated health: A questionnaire study on salutogenic work factors among Swedish primary health care employees.

Science.gov (United States)

Ejlertsson, Lina; Heijbel, Bodil; Ejlertsson, Göran; Andersson, Ingemar

2018-01-01

There is a lack of information on positive work factors among health care workers. To explore salutogenic work-related factors among primary health care employees. Questionnaire to all employees (n = 599) from different professions in public and private primary health care centers in one health care district in Sweden. The questionnaire, which had a salutogenic perspective, included information on self-rated health from the previously validated SHIS (Salutogenic Health Indicator Scale), psychosocial work environment and experiences, recovery, leadership, social climate, reflection and work-life balance. The response rate was 84%. A multivariable linear regression model, with SHIS as the dependent variable, showed three significant predictors. Recovery had the highest relationship to SHIS (β= 0.34), followed by experience of work-life balance (β= 0.25) and work experiences (β= 0.20). Increased experience of recovery during working hours related to higher self-rated health independent of recovery outside work. Individual experiences of work, work-life balance and, most importantly, recovery seem to be essential areas for health promotion. Recovery outside the workplace has been studied previously, but since recovery during work was shown to be of great importance in relation to higher self-rated health, more research is needed to explore different recovery strategies in the workplace.

Effect of previous exhaustive exercise on metabolism and fatigue development during intense exercise in humans

DEFF Research Database (Denmark)

Iaia, F. M.; Perez-Gomez, J.; Nordsborg, Nikolai

2010-01-01

The present study examined how metabolic response and work capacity are affected by previous exhaustive exercise. Seven subjects performed an exhaustive cycle exercise ( approximately 130%-max; EX2) after warm-up (CON) and 2 min after an exhaustive bout at a very high (VH; approximately 30 s), high...

Work to live, don’t live to work! : A cross-sectional study of the work-life balance of higher managers

OpenAIRE

Korpunen, Päivi; Nápravníková, Andrea

2007-01-01

The work-life balance is currently in vogue among governments, organizations as well as researchers. Higher managers in organizations all over the world are exposed to significant pressures in their jobs, which further influence the balance between their work and private lives, job satisfaction and overall well-being. In this thesis, we apply a different perspective on the topic of work-life balance than most of the previous scientific research. We have focused on the governmental, organizati...

The present state of research into plasma heating and injection methods

International Nuclear Information System (INIS)

1974-12-01

The advantages and disadvantages recognized by the Advisory Group on Heating and injection for twelve plasma heating and injection methods currently under investigation in Europe are related. The heating and injection requirements of four reference reactor designs are previously defined. The problems which arise when one attempts to extrapolate existing work towards the reactor goal are emphasized. Two refuelling methods not directly linked with the heating problem are discussed. The experiments in operation or under construction in Europe in which each method is investigated are listed. Sixteen working papers which served as a basis for the Advisory Group discussion and which cover all the heating and injection methods examined are included

Interventions to improve work outcomes in work-related PTSD: a systematic review

Directory of Open Access Journals (Sweden)

Bonato Sarah

2011-10-01

Full Text Available Abstract Background Posttraumatic stress disorder acquired at work can be debilitating both for workers and their employers. The disorder can result in increased sick leave, reduced productivity, and even unemployment. Furthermore, workers are especially unlikely to return to their previous place of employment after a traumatic incident at work because of the traumatic memories and symptoms of avoidance that typically accompany the disorder. Therefore, intervening in work-related PTSD becomes especially important in order to get workers back to the workplace. Methods A systematic literature search was conducted using Medline, PsycINFO, Embase, and Web of Science. The articles were independently screened based on inclusion and exclusion criteria, followed by a quality assessment of all included articles. Results The systematic search identified seven articles for inclusion in the review. These consisted of six research articles and one systematic review. The review focused specifically on interventions using real exposure techniques for anxiety disorders in the workplace. In the research articles addressed in the current review, study populations included police officers, public transportation workers, and employees injured at work. The studies examined the effectiveness of EMDR, cognitive-behavioural techniques, and an integrative therapy approach called brief eclectic psychotherapy. Interestingly, 2 of the 6 research articles addressed add-on treatments for workplace PTSD, which were designed to treat workers with PTSD who failed to respond to traditional evidence-based psychotherapy. Conclusions Results of the current review suggest that work-related interventions show promise as effective strategies for promoting return to work in employees who acquired PTSD in the workplace. Further research is needed in this area to determine how different occupational groups with specific types of traumatic exposure might respond differently to work

How to prevent type 2 diabetes in women with previous gestational diabetes?

DEFF Research Database (Denmark)

Pedersen, Anne Louise Winkler; Terkildsen Maindal, Helle; Juul, Lise

2017-01-01

OBJECTIVES: Women with previous gestational diabetes (GDM) have a seven times higher risk of developing type 2 diabetes (T2DM) than women without. We aimed to review the evidence of effective behavioural interventions seeking to prevent T2DM in this high-risk group. METHODS: A systematic review...... of RCTs in several databases in March 2016. RESULTS: No specific intervention or intervention components were found superior. The pooled effect on diabetes incidence (four trials) was estimated to: -5.02 per 100 (95% CI: -9.24; -0.80). CONCLUSIONS: This study indicates that intervention is superior...... to no intervention in prevention of T2DM among women with previous GDM....

Flexible work arrangements and work-family conflict after childbirth.

Science.gov (United States)

Grice, Mira M; McGovern, Patricia M; Alexander, Bruce H

2008-10-01

Previous research has revealed that work-family conflict negatively influences women's health following childbirth. To examine if flexible work arrangements were associated with work-family conflict among women, 1 year after childbirth. Employed women, aged >or=18, were recruited while hospitalized for childbirth. Flexible work arrangements were measured at 6 months and work-family conflict was measured at 12 months. General linear models estimated the association between flexible work arrangements and work-family conflict. Of 1157 eligible participants, 522 were included in this analysis giving a 45% response rate. Compared to women who reported that taking time off was very hard, those who reported it was not too hard (beta = -0.80, SE = 0.36, P hours was associated with greater home spillover (beta = 0.46, SE = 0.18, P work home was associated with increased home spillover (beta = 0.35, SE = 0.14, P work hours and the ability to take work home were associated with increased home spillover to work. The ability to take time off was associated with decreased job spillover to home. Additional research is needed to examine the intentional and unintentional consequences of flexible work arrangements.

Concepts of analytical user interface evaluation method for continuous work in NPP main control room

International Nuclear Information System (INIS)

Lee, S. J.; Heo, G. Y.; Jang, S. H.

2003-01-01

This paper describes a conceptual study of analytical evaluation method for computer-based user interface in the main control room of advanced nuclear power plant. User interfaces can classify them into two groups as static interface and dynamic interface. Existing evaluation and design methods of user interface have been mainly performed for the static user interface. But, it is useful for the dynamic user interface to control the complex system, and proper evaluation method for this is seldom. Therefore an evaluation method for dynamic user interface is proper for continuous works by standards of the load of cognition and the similarity of an interface

Integration of Psychodrama and Transactional Analysis Methods in psychoeducational work with school-age children in Russia

Directory of Open Access Journals (Sweden)

Marina Solomonovna Sokovnina

2015-01-01

Full Text Available Beginning with a comparison of the concepts and methods of psychodrama and transactional analysis, the authors identify similarities and present their experiences of combining these approaches in order to conduct workshops for 5th grade (11-12 years students within the Russian educational system.  They provide their rationale for this work, details of the content of the training and an example of the work of the students in the form of an agreement on cooperation between students and teachers.  They provide an analysis of the reported emotions during lessons for 78 students compared to 38 within control groups, showing increased positive emotions and decreased negative emotions for those in the transactional analysis/psychodrama lessons.  They conclude that the role-play method used was more effective than traditional educational methods within Russia for the development of autonomy, motivation and involvement of students.

Methods in Modern Biophysics

CERN Document Server

Nölting, Bengt

2006-01-01

Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and 267 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers and professors in biophysics, biochemistry and related fields. Special features in the 2nd edition: • Illustrates the high-resolution methods for ultrashort-living protei...

Statistical Sensitive Data Protection and Inference Prevention with Decision Tree Methods

National Research Council Canada - National Science Library

Chang, LiWu

2003-01-01

.... We consider inference as correct classification and approach it with decision tree methods. As in our previous work, sensitive data are viewed as classes of those test data and non-sensitive data are the rest attribute values...

Mixed methods study examining work reintegration experiences from perspectives of Veterans with mental health disorders.

Science.gov (United States)

Kukla, Marina; Rattray, Nicholas A; Salyers, Michelle P

2015-01-01

Recent findings have demonstrated that reintegration for Veterans is often challenging. One difficult aspect of reintegration—transitioning into the civilian workplace—has not been fully explored in the literature. To address this gap and examine work reintegration, this mixed methods study examined the perspectives of Veterans with mental health disorders receiving Department of Veterans Affairs healthcare. Forty Veterans rated factors that affect work success; participants also provided narratives on their most and least successful work experiences. We used t-tests and qualitative analysis to compare participants who did and did not serve in combat. Several themes relevant to work reintegration emerged in the narratives, particularly for Veterans who served in combat. An array of work difficulties were reported in the months following military discharge. In addition, Veterans who served in combat reported significantly more work barriers than Veterans who did not serve in combat, particularly health-related barriers. In conclusion, Veterans with mental health disorders who served in combat experienced more work reintegration difficulty than their counterparts who did not serve in combat. The role of being a Veteran affected how combat Veterans formed their self-concept, which also shaped their work success and community reintegration, especially during the early transition period.

Outdoor work and solar radiation exposure: Evaluation method for epidemiological studies.

Science.gov (United States)

Modenese, Alberto; Bisegna, Fabio; Borra, Massimo; Grandi, Carlo; Gugliermetti, Franco; Militello, Andrea; Gobba, Fabriziomaria

The health risk related to an excessive exposure to solar radiation (SR) is well known. The Sun represents the main exposure source for all the frequency bands of optical radiation, that is the part of the electromagnetic spectrum ranging between 100 nm and 1 mm, including infrared (IR), ultraviolet (UV) and visible radiation. According to recent studies, outdoor workers have a relevant exposure to SR but few studies available in scientific literature have attempted to retrace a detailed history of individual exposure. We propose a new method for the evaluation of SR cumulative exposure both during work and leisure time, integrating subjective and objective data. The former is collected by means of an interviewer administrated questionnaire. The latter is available through the Internet databases for many geographical regions and through individual exposure measurements. The data is integrated into a mathematical algorithm, in order to obtain an esteem of the individual total amount of SR the subjects have been exposed to during their lives. The questionnaire has been tested for 58 voluntary subjects. Environmental exposure data through online databases has been collected for 3 different places in Italy in 2012. Individual exposure by electronic UV dosimeter has been measured in 6 fishermen. A mathematical algorithm integrating subjective and objective data has been elaborated. The method proposed may be used in epidemiological studies to evaluate specific correlations with biological effects of SR and to weigh the role of the personal and environmental factors that may increase or reduce SR exposure. Med Pr 2016;67(5):577-587. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

DEVELOPMENT OF AUTOMATIC EXTRACTION METHOD FOR ROAD UPDATE INFORMATION BASED ON PUBLIC WORK ORDER OUTLOOK

Science.gov (United States)

Sekimoto, Yoshihide; Nakajo, Satoru; Minami, Yoshitaka; Yamaguchi, Syohei; Yamada, Harutoshi; Fuse, Takashi

Recently, disclosure of statistic data, representing financial effects or burden for public work, through each web site of national or local government, enables us to discuss macroscopic financial trends. However, it is still difficult to grasp a basic property nationwide how each spot was changed by public work. In this research, our research purpose is to collect road update information reasonably which various road managers provide, in order to realize efficient updating of various maps such as car navigation maps. In particular, we develop the system extracting public work concerned and registering summary including position information to database automatically from public work order outlook, released by each local government, combinating some web mining technologies. Finally, we collect and register several tens of thousands from web site all over Japan, and confirm the feasibility of our method.

Estimating the cost of accidents and ill-health at work : a review of methodologies

NARCIS (Netherlands)

Weerd, M. de; Tierney, R.; Duuren-Stuurman, B. van; Bertranou, E.

2014-01-01

What is the real price to pay for not investing in occupational safety and health? Many studies have previously tackled this question by evaluating the costs of poor or non-existent safety and health at work. This report reviews a selection of these studies and analyses the estimating methods used

Association among Working Hours, Occupational Stress, and Presenteeism among Wage Workers: Results from the Second Korean Working Conditions Survey

Science.gov (United States)

2014-01-01

Objectives The purpose of the present study was to identify the association between presenteeism and long working hours, shiftwork, and occupational stress using representative national survey data on Korean workers. Methods We analyzed data from the second Korean Working Conditions Survey (KWCS), which was conducted in 2010, in which a total of 6,220 wage workers were analyzed. The study population included the economically active population aged above 15 years, and living in the Republic of Korea. We used the chi-squared test and multivariate logistic regression to test the statistical association between presenteeism and working hours, shiftwork, and occupational stress. Results Approximately 19% of the workers experienced presenteeism during the previous 12 months. Women had higher rates of presenteeism than men. We found a statistically significant dose–response relationship between working hours and presenteeism. Shift workers had a slightly higher rate of presenteeism than non-shift workers, but the difference was not statistically significant. Occupational stress, such as high job demand, lack of rewards, and inadequate social support, had a significant association with presenteeism. Conclusions The present study suggests that long working hours and occupational stress are significantly related to presenteeism. PMID:24661575

Analysis of previous perceptual and motor experience in breaststroke kick learning

Directory of Open Access Journals (Sweden)

Ried Bettina

2015-12-01

Full Text Available One of the variables that influence motor learning is the learner’s previous experience, which may provide perceptual and motor elements to be transferred to a novel motor skill. For swimming skills, several motor experiences may prove effective. Purpose. The aim was to analyse the influence of previous experience in playing in water, swimming lessons, and music or dance lessons on learning the breaststroke kick. Methods. The study involved 39 Physical Education students possessing basic swimming skills, but not the breaststroke, who performed 400 acquisition trials followed by 50 retention and 50 transfer trials, during which stroke index as well as rhythmic and spatial configuration indices were mapped, and answered a yes/no questionnaire regarding previous experience. Data were analysed by ANOVA (p = 0.05 and the effect size (Cohen’s d ≥0.8 indicating large effect size. Results. The whole sample improved their stroke index and spatial configuration index, but not their rhythmic configuration index. Although differences between groups were not significant, two types of experience showed large practical effects on learning: childhood water playing experience only showed major practically relevant positive effects, and no experience in any of the three fields hampered the learning process. Conclusions. The results point towards diverse impact of previous experience regarding rhythmic activities, swimming lessons, and especially with playing in water during childhood, on learning the breaststroke kick.

The influence of previous low back trouble, general health, and working conditions on future sick-listing because of low back trouble. A 15-year follow-up study of risk indicators for self-reported sick-listing caused by low back trouble.

Science.gov (United States)

Müller, C F; Monrad, T; Biering-Sørensen, F; Darre, E; Deis, A; Kryger, P

1999-08-01

A 15-year follow-up study. To find risk indicators for self-reported sick-listing because of low back trouble and to evaluate which variables were the most important indicators of work incapacity resulting from low back trouble during the follow-up period of 15 years. The initial data were obtained from a health survey conducted in a general population from the Municipality of Glostrup, Denmark. The follow-up data included information from the Central Person Register, the Early Retirement Pension Register, and a postal questionnaire regarding self-reported sick-listing because of low back trouble. An epidemiologic study, in which logistic regression analyses were used for evaluation of the data. The model used consisted of the variable in question, age, gender, and previous experience of low back trouble, along with interactions. It was found that 22 of 37 variables were risk indicators for later self-reported sick-listing because of low back trouble during the preceding year or the 7 years before the date of follow-up evaluation. In analyzing the most significant variables simultaneously, it was found that information from the initial investigation about sick-listing in general during the previous 10 years, sciatic pain, use of analgesics for low back trouble, previous sick-listing because of low back trouble, and occupation were the most important risk indicators for self-reported work incapacity resulting from low back trouble during the follow-up period of 15 years. Findings showed that the strongest prognostic indicators of later sick-listing because of low back trouble involve information from the person about previous sick-listing behavior in general and previous experience of low back trouble episodes, especially if these had been accompanied by sciatic pain, use of analgesics, or previous low back trouble sick-listing.

New low back pain in nurses: work activities, work stress and sedentary lifestyle.

Science.gov (United States)

Yip, Vera Yin Bing

2004-05-01

Low back pain is common among nurses. Previous studies have shown that the risk of low back pain increases rapidly with greater amounts of physical work and psychological stress, but is inversely related to leisure activities. However, these previous studies were predominantly retrospective in design and not many took account of three factors simultaneously. This 12-month prospective study examined the relationships between work activities, work stress, sedentary lifestyle and new low back pain. A total of 144 nurses from six Hong Kong district hospitals completed a face-to-face baseline interview, which was followed-up by a telephone interview. The main study measures were demographic characteristics, work activities, work stress, physical leisure activities and the nature of new low back pain during the 12-month follow-up period. Level of work stress, quality of relationships at work, level of enjoyment experienced at work, and work satisfaction were self-reported. Fifty-six (38.9%) nurses reported experiencing new low back pain. Sedentary leisure time activity was not associated with new low back pain. Being comparatively new on a ward (adjusted relative risk 2.90), working in bending postures (adjusted relative risk 2.76) and poor work relationships with colleagues (adjusted relative risk 2.52) were independent predictors of new low back pain. The findings of this study suggest that low back pain is a common problem in the population of nurses in Hong Kong. Being comparatively new on a ward, bending frequently during work and having poor work relationships with colleagues are independent predictors of new low back pain. Training for high-risk work activities and ergonomic assessment of awkward work postures are essential. Moreover, relaxation and team-building workshops for nurses, especially those who are less experienced in the type of work on their current ward, are recommended.

Return to work after work-related stress: a randomized controlled trial of a work-focused cognitive behavioral intervention.

Science.gov (United States)

Dalgaard, Vita Ligaya; Aschbacher, Kirstin; Andersen, Johan Hviid; Glasscock, David John; Willert, Morten Vejs; Carstensen, Ole; Biering, Karin

2017-09-01

Objectives This study aimed to evaluate the effect of a stress management intervention (SMI) on lasting return to work (RTW) among patients with work-related stress complaints. Methods Sickness benefit departments from three local municipalities referred patients on sick leave with work-related adjustment disorders or mild depression to the Department of Occupational Medicine, Regional Hospital West Jutland. A 2× randomization procedure allocated patients into one of three groups: intervention (N=58), control A (which received a clinical assessment; N=56), or control B (no assessment; N=49). Treatment comprised individual work-focused cognitive behavioral therapy (CBT) with an optional workplace intervention. The outcome was time until lasting RTW (16 and 44 weeks follow-up) using register data. Results Median number of weeks until lasting RTW was 15, 19, and 32 for the intervention group, control A, and control B respectively. However, for group B, clinical assessment was not part of the inclusion process, which may have introduced selection bias. In the fully-adjusted Cox regression model, the intervention group exhibited significantly faster lasting RTW at 44 weeks; hazard ratio (HR) 1.57 [95% confidence interval (95% CI) 1.01-2.44] relative to control group A, with a non-significant trend evident at 16 weeks; HR 1.70 (95% CI 0.94-3.10), when controlling for age, gender, occupation, sick leave during previous year, full or partial sick leave, and diagnosis. Unadjusted analyses remained directionally consistent but were reduced to marginal significance. Conclusions There was a tendency towards faster lasting RTW in the intervention group compared to control A, which received clinical assessment, in all analyses. The intervention group returned to work about 4 weeks earlier than control A, which could translate into substantial financial gains.

Transient thermal stresses of work roll by coupled thermoelasticity

Science.gov (United States)

Lai, W. B.; Chen, T. C.; Weng, C. I.

1991-01-01

A numerical method, based on a two-dimensional plane strain model, is developed to predict the transient responses (that include distributions of temperature, thermal deformation, and thermal stress) of work roll during strip rolling by coupled thermoelasticity. The method consists of discretizing the space domain of the problem by finite element method first, and then treating the time domain by implicit time integration techniques. In order to avoid the difficulty in analysis due to relative movement between work roll and its thermal boundary, the energy equation is formulated with respect to a fixed Eulerian reference frame. The effect of thermoelastic coupling term, that is generally disregarded in strip rolling, can be considered and assessed. The influences of some important process parameters, such as rotational speed of the roll and intensity of heat flux, on transient solutions are also included and discussed. Furthermore, since the stress history at any point of the roll in both transient and steady state could be accurately evaluated, it is available to perform the analysis of thermal fatigue for the roll by means of previous data.

Low back pain in military recruits in relation to social background and previous low back pain. A cross-sectional and prospective observational survey

DEFF Research Database (Denmark)

Hestbæk, Lise; Larsen, K.; Weidich, F.

2005-01-01

back pain in the development of low back pain in military recruits. METHODS: During a three-month period, Danish military recruits with different social backgrounds live and work under the same conditions. Thus, there is an opportunity to investigate the influence of social background......BACKGROUND: Traditionally, studies on the etiology of low back pain have been carried out in adult populations. However, since low back pain often appears early in life, more research on young populations is needed. This study focuses on the importance of social background factors and previous low...... on the development of low back pain, when persons are removed from their usual environment and submitted to a number of new stressors. In addition, the importance of the recruits' previous low back pain history in relation to low back pain during military service was studied. This was done by means of questionnaires...

The conformal method and the conformal thin-sandwich method are the same

International Nuclear Information System (INIS)

Maxwell, David

2014-01-01

The conformal method developed in the 1970s and the more recent Lagrangian and Hamiltonian conformal thin-sandwich methods are techniques for finding solutions of the Einstein constraint equations. We show that they are manifestations of a single conformal method: there is a straightforward way to convert back and forth between the parameters for these methods so that the corresponding solutions of the Einstein constraint equations agree. The unifying idea is the need to clearly distinguish tangent and cotangent vectors to the space of conformal classes on a manifold, and we introduce a vocabulary for working with these objects without reference to a particular representative background metric. As a consequence of these conceptual advantages, we demonstrate how to strengthen previous near-CMC (constant mean curvature) existence and non-existence theorems for the original conformal method to include metrics with scalar curvatures that change sign. (paper)

Numerical method for solving integral equations of neutron transport. II

International Nuclear Information System (INIS)

Loyalka, S.K.; Tsai, R.W.

1975-01-01

In a recent paper it was pointed out that the weakly singular integral equations of neutron transport can be quite conveniently solved by a method based on subtraction of singularity. This previous paper was devoted entirely to the consideration of simple one-dimensional isotropic-scattering and one-group problems. The present paper constitutes interesting extensions of the previous work in that in addition to a typical two-group anisotropic-scattering albedo problem in the slab geometry, the method is also applied to an isotropic-scattering problem in the x-y geometry. These results are compared with discrete S/sub N/ (ANISN or TWOTRAN-II) results, and for the problems considered here, the proposed method is found to be quite effective. Thus, the method appears to hold considerable potential for future applications. (auth)

Making 'what works' work

DEFF Research Database (Denmark)

Plum, Maja

2017-01-01

and a mattress. As such, the paper shows how DR, as an evidence-based method, is established through concrete relations, rather than abstracted and universal principals. It argues that these relations stabilising DR are never enacted once and for all, but require continual work to be held together as a method...... that ‘works’....

Feminist Policy Analysis: Expanding Traditional Social Work Methods

Science.gov (United States)

Kanenberg, Heather

2013-01-01

In an effort to move the methodology of policy analysis beyond the traditional and artificial position of being objective and value-free, this article is a call to those working and teaching in social work to consider a feminist policy analysis lens. A review of standard policy analysis models is presented alongside feminist models. Such a…

Paid care work and depression

DEFF Research Database (Denmark)

Madsen, Ida E H; Aust, Birgit; Burr, Hermann

2012-01-01

Previous studies have reported that employees in paid care work (e.g., child, health, and elderly care) have increased rates of hospitalization with depression and treatment with antidepressants. It is unclear, however, whether these findings reflect a causal effect of the work on employee mental...

Locating previously unknown patterns in data-mining results: a dual data- and knowledge-mining method

Directory of Open Access Journals (Sweden)

Knaus William A

2006-03-01

Full Text Available Abstract Background Data mining can be utilized to automate analysis of substantial amounts of data produced in many organizations. However, data mining produces large numbers of rules and patterns, many of which are not useful. Existing methods for pruning uninteresting patterns have only begun to automate the knowledge acquisition step (which is required for subjective measures of interestingness, hence leaving a serious bottleneck. In this paper we propose a method for automatically acquiring knowledge to shorten the pattern list by locating the novel and interesting ones. Methods The dual-mining method is based on automatically comparing the strength of patterns mined from a database with the strength of equivalent patterns mined from a relevant knowledgebase. When these two estimates of pattern strength do not match, a high "surprise score" is assigned to the pattern, identifying the pattern as potentially interesting. The surprise score captures the degree of novelty or interestingness of the mined pattern. In addition, we show how to compute p values for each surprise score, thus filtering out noise and attaching statistical significance. Results We have implemented the dual-mining method using scripts written in Perl and R. We applied the method to a large patient database and a biomedical literature citation knowledgebase. The system estimated association scores for 50,000 patterns, composed of disease entities and lab results, by querying the database and the knowledgebase. It then computed the surprise scores by comparing the pairs of association scores. Finally, the system estimated statistical significance of the scores. Conclusion The dual-mining method eliminates more than 90% of patterns with strong associations, thus identifying them as uninteresting. We found that the pruning of patterns using the surprise score matched the biomedical evidence in the 100 cases that were examined by hand. The method automates the acquisition of

Differences between Presentation Methods in Working Memory Procedures: A Matter of Working Memory Consolidation

Science.gov (United States)

Ricker, Timothy J.; Cowan, Nelson

2014-01-01

Understanding forgetting from working memory, the memory used in ongoing cognitive processing, is critical to understanding human cognition. In the past decade, a number of conflicting findings have been reported regarding the role of time in forgetting from working memory. This has led to a debate concerning whether longer retention intervals…

Thermal load forecasting in district heating networks using deep learning and advanced feature selection methods

NARCIS (Netherlands)

Suryanarayana, Gowri; Lago Garcia, J.; Geysen, Davy; Aleksiejuk, Piotr; Johansson, Christian

2018-01-01

Recent research has seen several forecasting methods being applied for heat load forecasting of district heating networks. This paper presents two methods that gain significant improvements compared to the previous works. First, an automated way of handling non-linear dependencies in linear

HEURISTIC METHOD OF SHIPS SELECTION FOR THE COORDINATED WORK OF WATER TRANSPORT

Directory of Open Access Journals (Sweden)

O. V. Shcherbina

2018-02-01

Full Text Available Purpose. The study aims to develop a formulation methodology for ship selection in the coordinated work of sea and river transport using a heuristic approach. Methodology. To realize the purpose set in the study, the authors carried out an analysis of domestic and foreign literature sources on the current topic, studied specifics and conditions for the effective operation of marine mono-hulled ships and composite tug/barge towing ones. Findings. The analysis results allowed formulating the heuristics methods that ensure the selection of the type sizes of tug/barge towing ships for the mixed «river-sea» navigation from the priority range of ships of the existing fleet. The proposed method makes it possible to select ships in a more appropriate manner according to the established scheme of work. Rational combinations of technical and operational characteristics of such pairs as «barges and tows», «tug/barge towing ship and sea-going ship», «tug/barge towing ship and restrictive characteristics of the area of navigation» are a prerequisite for the shipping company profit growth by increasing the capacity of ships. Originality. For the first time, the authors applied a heuristic approach to the selection of tug/barge towing ships and sea-going ones for coordinated work with the performance of cargo operations on the raid of the estuary port when transporting bulk goods. The basis of the approach is the selection of a rational mix of technical and operational characteristics of barges and tugs. The proposed approach allows determining the best combination of ship type sizes in the organization of coordinated work of sea and river transport. At the same time, the continuity of the goods transportation process from the sea ports to the river ones located in the depth of the country (and in the opposite direction is ensured. Practical value. The presented methodology is a logical continuation of the cycle of studies performed by the authors. The

Evaluating an mHealth App for Health and Well-Being at Work: Mixed-Method Qualitative Study.

Science.gov (United States)

de Korte, Elsbeth Marieke; Wiezer, Noortje; Janssen, Joris H; Vink, Peter; Kraaij, Wessel

2018-03-28

To improve workers' health and well-being, workplace interventions have been developed, but utilization and reach are unsatisfactory, and effects are small. In recent years, new approaches such as mobile health (mHealth) apps are being developed, but the evidence base is poor. Research is needed to examine its potential and to assess when, where, and for whom mHealth is efficacious in the occupational setting. To develop interventions for workers that actually will be adopted, insight into user satisfaction and technology acceptance is necessary. For this purpose, various qualitative evaluation methods are available. The objectives of this study were to gain insight into (1) the opinions and experiences of employees and experts on drivers and barriers using an mHealth app in the working context and (2) the added value of three different qualitative methods that are available to evaluate mHealth apps in a working context: interviews with employees, focus groups with employees, and a focus group with experts. Employees of a high-tech company and experts were asked to use an mHealth app for at least 3 weeks before participating in a qualitative evaluation. Twenty-two employees participated in interviews, 15 employees participated in three focus groups, and 6 experts participated in one focus group. Two researchers independently coded, categorized, and analyzed all quotes yielded from these evaluation methods with a codebook using constructs from user satisfaction and technology acceptance theories. Interviewing employees yielded 785 quotes, focus groups with employees yielded 266 quotes, and the focus group with experts yielded 132 quotes. Overall, participants muted enthusiasm about the app. Combined results from the three evaluation methods showed drivers and barriers for technology, user characteristics, context, privacy, and autonomy. A comparison between the three qualitative methods showed that issues revealed by experts only slightly overlapped with those

Social Support and Work Stress: A Mixed Method Analysis

Directory of Open Access Journals (Sweden)

Vânia Lúcia Pereira de Andrade

2017-12-01

Full Text Available Occupational stress and coping strategies have increasingly become the focus of research for their applied feature. The aim of this study was to investigate how social support has helped people deal with stressful situations in the workplace. In order to reach this aim an exploratory mixed method embedded research design was conducted. Study 1, quantitative, described the level of satisfaction with social support and perceived organizational support by employing a scale that summarized factors of the perceived organizational support. Study 2, a qualitative one, sought to describe the stressors in the workplace environment, to whom the workers resorted to, and the kind of perceived social support. The group interview script was based on the dimensions proposed by Folkman e Lazarus (1985 model. Fifty-one volunteer workers participated in the study. Results showed a lack of social support in the workplace: incivility of colleagues and managers, psychological contract breach and conflict of values. Investments in personal development that stimulate urbanity in organizations and a listening space for employees are suggested actions that can benefit affective dimensions of work.

Methods in Modern Biophysics

CERN Document Server

Nölting, Bengt

2010-01-01

Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

Measuring Engagement at Work: Validation of the Chinese Version of the Utrecht Work Engagement Scale

OpenAIRE

Ng, Sm; Fong, TCt

2011-01-01

Background: Work engagement is a positive work-related state of fulfillment characterized by vigor, dedication, and absorption. Previous studies have operationalized the construct through development of the Utrecht Work Engagement Scale. Apart from the original three-factor 17-item version of the instrument (UWES-17), there exists a nine-item shortened revised version (UWES-9). Purpose: The current study explored the psychometric properties of the Chinese version of the Utrecht Work Engagemen...

Measuring Engagement at Work: Validation of the Chinese Version of the Utrecht Work Engagement Scale

OpenAIRE

Fong, Ted Chun-tat; Ng, Siu-man

2011-01-01

Background Work engagement is a positive work-related state of fulfillment characterized by vigor, dedication, and absorption. Previous studies have operationalized the construct through development of the Utrecht Work Engagement Scale. Apart from the original three-factor 17-item version of the instrument (UWES-17), there exists a nine-item shortened revised version (UWES-9). Purpose The current study explored the psychometric properties of the Chinese version of the Utrecht Work Engagement ...

A Method to Train Marmosets in Visual Working Memory Task and Their Performance.

Science.gov (United States)

Nakamura, Katsuki; Koba, Reiko; Miwa, Miki; Yamaguchi, Chieko; Suzuki, Hiromi; Takemoto, Atsushi

2018-01-01

Learning and memory processes are similarly organized in humans and monkeys; therefore, monkeys can be ideal models for analyzing human aging processes and neurodegenerative diseases such as Alzheimer's disease. With the development of novel gene modification methods, common marmosets ( Callithrix jacchus ) have been suggested as an animal model for neurodegenerative diseases. Furthermore, the common marmoset's lifespan is relatively short, which makes it a practical animal model for aging. Working memory deficits are a prominent symptom of both dementia and aging, but no data are currently available for visual working memory in common marmosets. The delayed matching-to-sample task is a powerful tool for evaluating visual working memory in humans and monkeys; therefore, we developed a novel procedure for training common marmosets in such a task. Using visual discrimination and reversal tasks to direct the marmosets' attention to the physical properties of visual stimuli, we successfully trained 11 out of 13 marmosets in the initial stage of the delayed matching-to-sample task and provided the first available data on visual working memory in common marmosets. We found that the marmosets required many trials to initially learn the task (median: 1316 trials), but once the task was learned, the animals needed fewer trials to learn the task with novel stimuli (476 trials or fewer, with the exception of one marmoset). The marmosets could retain visual information for up to 16 s. Our novel training procedure could enable us to use the common marmoset as a useful non-human primate model for studying visual working memory deficits in neurodegenerative diseases and aging.

7. Methods of work in radiochemistry

International Nuclear Information System (INIS)

Majer, V.

1981-01-01

Radiochemical operating techniques are briefly characterized and the basic differences are shown in handling chemical and radioactive materials. Radiochemical techniques are determined by the aspect of operation where the criterium consists either of the quantity of material, activity or the properties of the radionuclide. Main principles are shown of trace techniques, microchemical techniques and techniques of work with high-level radioactive material. The basic hygienic principles are also shown of handling radioactive materials. (B.S.)

Exploring factors that influence work analysis data: A meta-analysis of design choices, purposes, and organizational context.

Science.gov (United States)

DuVernet, Amy M; Dierdorff, Erich C; Wilson, Mark A

2015-09-01

Work analysis is fundamental to designing effective human resource systems. The current investigation extends previous research by identifying the differential effects of common design decisions, purposes, and organizational contexts on the data generated by work analyses. The effects of 19 distinct factors that span choices of descriptor, collection method, rating scale, and data source, as well as project purpose and organizational features, are explored. Meta-analytic results cumulated from 205 articles indicate that many of these variables hold significant consequences for work analysis data. Factors pertaining to descriptor choice, collection method, rating scale, and the purpose for conducting the work analysis each showed strong associations with work analysis data. The source of the work analysis information and organizational context in which it was conducted displayed fewer relationships. Findings can be used to inform choices work analysts make about methodology and postcollection evaluations of work analysis information. (c) 2015 APA, all rights reserved).

Rotating shift work associated with obesity in men from northeastern Ontario

Directory of Open Access Journals (Sweden)

Anne Grundy

2017-08-01

Full Text Available Introduction: While some studies have suggested associations between shift work and obesity, few have been population-based or considered multiple shift schedules. Since obesity is linked with several chronic health conditions, understanding which types of shift work influence obesity is important and additional work with more detailed exposure assessment of shift work is warranted. Methods: Using multivariate polytomous logistic regression, we investigated the associations between shift work (evening/night, rotating and other shift schedules and overweight and obesity as measured by body mass index cross-sectionally among 1561 men. These men had previously participated as population controls in a prostate cancer case-control study conducted in northeastern Ontario from 1995 to 1999. We obtained information on work history (including shift work, height and weight from the existing self-reported questionnaire data. Results: We observed an association for ever (vs. never having been employed in rotating shift work for both the overweight (OR [odds ratio] = 1.34; 95% CI [confidence interval]: 1.05–1.73 and obese (OR = 1.57; 95% CI: 1.12–2.21 groups. We also observed nonsignificant associations for ever (vs. never having been employed in permanent evening/night shifts. In addition, we found a significant trend of increased risk for both overweight and obesity with increasing duration of rotating shift work. Conclusion: Both the positive association between rotating shift work and obesity and the suggested positive association for permanent evening/night shift work in this study are consistent with previous findings. Future population-based research that is able to build on our results while examining additional shift work characteristics will further clarify whether some shift patterns have a greater impact on obesity than others.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-07-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-01-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

VBAC Scoring: Successful vaginal delivery in previous one caesarean section in induced labour

International Nuclear Information System (INIS)

Raja, J.F.; Bangash, K.T.; Mahmud, G.

2013-01-01

Objective: To develop a scoring system for the prediction of successful vaginal birth after caesarean section, following induction of labour with intra-vaginal E2 gel (Glandin). Methods: The cross-sectional study was conducted from January 2010 to August 2011, at the Pakistan Institute of Medical Sciences in Islamabad. Trial of labour in previous one caesarean section, undergoing induction with intra-vaginal E2 gel, was attempted in 100 women. They were scored according to six variables; maternal age; gestation; indications of previous caesarean; history of vaginal birth either before or after the previous caesarean; Bishop score and body mass index. Multivariate and univariate logistic regression analysis was used to develop the scoring system. Results: Of the total, 67 (67%) women delivered vaginally, while 33 (33%) ended in repeat caesarean delivery. Among the subjects, 55 (55%) women had no history of vaginal delivery either before or after previous caesarean section; 15 (15%) had history of vaginal births both before and after the previous caesarean; while 30 (30%) had vaginal delivery only after the previous caesarean section. Rates of successful vaginal birth after caesarean increased from 38% in women having a score of 0-3 to 58% in patients scoring 4-6. Among those having a score of 7-9 and 10-12, the success rates were 71% and 86% respectively. Conclusion: Increasing scores correlated with the increasing probability of vaginal birth after caesarean undergoing induction of labour. The admission VBAC scoring system is useful in counselling women with previous caesarean for the option of induction of labour or repeat caesarean delivery. (author)

Who wants to work with older people? Swedish student nurses' willingness to work in elderly care--a questionnaire study.

Science.gov (United States)

Carlson, Elisabeth; Idvall, Ewa

2015-07-01

The aging population is a globally recognized challenge for the health care service. The growing number of older people will probably lead to increased demands for nurses working in elderly care. Clinical practice has been shown to have an impact on how student nurses perceive a particular field of nursing. To compare perceptions of the clinical learning environment in nursing homes among students considering a career in aged care or not, and to examine the difference in age, gender and previous working experience as health care assistants in elderly care between the two groups. This was a cross-sectional study using the Swedish version of the Clinical Learning Environment and Nurse Teacher evaluation scale. Consecutive sampling was performed over three semesters from September 2011 to December 2012. The survey was conducted with 183 student nurses. Mann-Whitney U-test was used to examine differences in relation to two groups namely student nurses who did or did not consider to work in elderly care. A chi-square test of independence was performed to examine the difference in age, gender and previous working experience between the two groups. The analysis leaned towards an overall positive evaluation of the clinical learning environment with more positive values for students considering a career. There were no significant differences between younger students (18-23) and older students (24-50) regarding willingness to work in elderly care or not. Neither was any significant difference displayed between students, based on gender nor for previous work experience. Age, gender and previous work experiences as health care assistants did not impact on students' willingness to work in elderly care. Future studies need to acknowledge the complexity of why student nurses choose a particular pathway in nursing by longitudinal studies following cohorts of students during the course of the nursing programme. Copyright © 2015 Elsevier Ltd. All rights reserved.

[The Significance of Work Motivation for Rehabilitation Success].

Science.gov (United States)

Kessemeier, Franziska; Stöckler, Christiane; Petermann, Franz; Bassler, Markus; Pfeiffer, Wolfgang; Kobelt, Axel

2017-11-28

Aim of this study Apart from the reduction of symptoms and the restoration of working ability, return to work is a long-term goal of medical rehabilitation. The aim of this study is to analyze the influence of work motivation on the outcome of rehabilitation. Methods The data basis consists of N=998 patients at the psychosomatic department of the Oberharz Rehabilitation Center as well as data from insurance accounts. Using multiple linear regression analysis the predictive power of work motivation on rehabilitation outcome as well as different facets of work motivation in their function as predictors are analyzed. Results Only minor statistical relations could be found between work motivation and rehabilitation success when also taking employment status of the previous year and subjective vocational disability into account. A small predictive power can be attributed to work motivation as a factor in rehabilitation success in the sense of a reduction of symptoms. Particular facets of work motivation are suitable to predict rehabilitation success. Patients with a work motivation risk profile differ from patients with a normal work motivation profile as regards their capacity to work in the year following rehabilitation treatment. Conclusion Work motivation represents a relevant construct in rehabilitation success but is strongly influenced by individual factors. During rehabilitation, individual problems which influence work motivation should be taken into account more strongly. © Georg Thieme Verlag KG Stuttgart · New York.

A strategy for evaluating pathway analysis methods.

Science.gov (United States)

Yu, Chenggang; Woo, Hyung Jun; Yu, Xueping; Oyama, Tatsuya; Wallqvist, Anders; Reifman, Jaques

2017-10-13

Researchers have previously developed a multitude of methods designed to identify biological pathways associated with specific clinical or experimental conditions of interest, with the aim of facilitating biological interpretation of high-throughput data. Before practically applying such pathway analysis (PA) methods, we must first evaluate their performance and reliability, using datasets where the pathways perturbed by the conditions of interest have been well characterized in advance. However, such 'ground truths' (or gold standards) are often unavailable. Furthermore, previous evaluation strategies that have focused on defining 'true answers' are unable to systematically and objectively assess PA methods under a wide range of conditions. In this work, we propose a novel strategy for evaluating PA methods independently of any gold standard, either established or assumed. The strategy involves the use of two mutually complementary metrics, recall and discrimination. Recall measures the consistency of the perturbed pathways identified by applying a particular analysis method to an original large dataset and those identified by the same method to a sub-dataset of the original dataset. In contrast, discrimination measures specificity-the degree to which the perturbed pathways identified by a particular method to a dataset from one experiment differ from those identifying by the same method to a dataset from a different experiment. We used these metrics and 24 datasets to evaluate six widely used PA methods. The results highlighted the common challenge in reliably identifying significant pathways from small datasets. Importantly, we confirmed the effectiveness of our proposed dual-metric strategy by showing that previous comparative studies corroborate the performance evaluations of the six methods obtained by our strategy. Unlike any previously proposed strategy for evaluating the performance of PA methods, our dual-metric strategy does not rely on any ground truth

49 CFR 173.23 - Previously authorized packaging.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Previously authorized packaging. 173.23 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Preparation of Hazardous Materials for Transportation § 173.23 Previously authorized packaging. (a) When the regulations specify a packaging with a specification marking...

LCD denoise and the vector mutual information method in the application of the gear fault diagnosis under different working conditions

Science.gov (United States)

Xiangfeng, Zhang; Hong, Jiang

2018-03-01

In this paper, the full vector LCD method is proposed to solve the misjudgment problem caused by the change of the working condition. First, the signal from different working condition is decomposed by LCD, to obtain the Intrinsic Scale Component (ISC)whose instantaneous frequency with physical significance. Then, calculate of the cross correlation coefficient between ISC and the original signal, signal denoising based on the principle of mutual information minimum. At last, calculate the sum of absolute Vector mutual information of the sample under different working condition and the denoised ISC as the characteristics to classify by use of Support vector machine (SVM). The wind turbines vibration platform gear box experiment proves that this method can identify fault characteristics under different working conditions. The advantage of this method is that it reduce dependence of man’s subjective experience, identify fault directly from the original data of vibration signal. It will has high engineering value.

The Work Design Questionnaire (WDQ): Developing and Validating a Comprehensive Measure for Assessing Job Design and the Nature of Work

Science.gov (United States)

Morgeson, Frederick P.; Humphrey, Stephen E.

2006-01-01

Although there are thousands of studies investigating work and job design, existing measures are incomplete. In an effort to address this gap, the authors reviewed the work design literature, identified and integrated previously described work characteristics, and developed a measure to tap those work characteristics. The resultant Work Design…

Live to work or love to work: work craving and work engagement.

Directory of Open Access Journals (Sweden)

Kamila Wojdylo

Full Text Available OBJECTIVE: According to the theory of work craving, a workaholic has a craving for self-worth compensatory incentives and an expectation of relief from negative affect experienced through neurotic perfectionism and an obsessive-compulsive style of working. Research has shown that workaholism and work engagement should be considered as two distinct work styles with different health consequences. However, the mechanisms underlying the adoption of these work styles have been neglected. The present study proposes that work craving and work engagement are differentially associated with self-regulatory competencies and health. In particular, we expected that the working styles mediate the relationships between emotional self-regulation and health. METHODS: In the cross-sectional study, 469 teachers from German schools completed online administered questionnaires. By means of structural equation modeling, we tested two indirect paths: a from self-relaxation deficits via work craving to poor health and b from self-motivation competencies via work engagement to good health. RESULTS: As expected, we found evidence that a the negative relationship of self-relaxation deficits on health was partially mediated by work craving and b the positive relationship of self-motivation competencies on health was partially mediated by work engagement. CONCLUSIONS: The present study emphasizes the importance of self-regulation competencies for healthy or unhealthy work styles. Whereas work craving was associated with a low ability to down-regulate negative emotions and poor health, work engagement was associated with a high ability to up-regulate positive emotions and good health.

Faculty Experiences of Merger and Organizational Change in a Social Work Program.

Science.gov (United States)

Adedoyin, A Christson; Miller, Monte; Jackson, Mary S; Dodor, Bernice; Hall, Kristen

2016-01-01

Social work programs are experiencing unprecedented organizational changes due to budget cuts, dwindling resources, global, and technological challenges. However, there is limited information in the literature about the merger experiences of faculty in social work programs. On one hand undergoing merger and reorganization provides the opportunity to reorganize, reprioritize, re-assess, develop strategies, and explore previously untapped opportunities for social work programs. Conversely, merger experiences have caused frustration, intention to quit, confusion, and loss of professional identity for social work faculty. In this article the authors utilize a journaling method and sense-making approach of the merger experiences of some of the faculty members of a social work program in the United States. The authors suggest a framework to understand how the faculty confronted the challenges, overcame the pitfalls, and maximized the opportunities offered during the merger and organizational change process.

22 CFR 40.91 - Certain aliens previously removed.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certain aliens previously removed. 40.91... IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Aliens Previously Removed § 40.91 Certain aliens previously removed. (a) 5-year bar. An alien who has been found inadmissible, whether as a result...

Discount method for programming language evaluation

DEFF Research Database (Denmark)

Kurtev, Svetomir; Christensen, Tommy Aagaard; Thomsen, Bent

2016-01-01

This paper presents work in progress on developing a Discount Method for Programming Language Evaluation inspired by the Discount Usability Evaluation method (Benyon 2010) and the Instant Data Analysis method (Kjeldskov et al. 2004). The method is intended to bridge the gap between small scale...... internal language design evaluation methods and large scale surveys and quantitative evaluation methods. The method is designed to be applicable even before a compiler or IDE is developed for a new language. To test the method, a usability evaluation experiment was carried out on the Quorum programming...... language (Stefik et al. 2016) using programmers with experience in C and C#. When comparing our results with previous studies of Quorum, most of the data was comparable though not strictly in agreement. However, the discrepancies were mainly related to the programmers pre-existing expectations...

A Latent Variable Clustering Method for Wireless Sensor Networks

DEFF Research Database (Denmark)

Vasilev, Vladislav; Iliev, Georgi; Poulkov, Vladimir

2016-01-01

In this paper we derive a clustering method based on the Hidden Conditional Random Field (HCRF) model in order to maximizes the performance of a wireless sensor. Our novel approach to clustering in this paper is in the application of an index invariant graph that we defined in a previous work and...

A website evaluation model by integration of previous evaluation models using a quantitative approach

Directory of Open Access Journals (Sweden)

Ali Moeini

2015-01-01

Full Text Available Regarding the ecommerce growth, websites play an essential role in business success. Therefore, many authors have offered website evaluation models since 1995. Although, the multiplicity and diversity of evaluation models make it difficult to integrate them into a single comprehensive model. In this paper a quantitative method has been used to integrate previous models into a comprehensive model that is compatible with them. In this approach the researcher judgment has no role in integration of models and the new model takes its validity from 93 previous models and systematic quantitative approach.

Outcome of trial of scar in patients with previous caesarean section

International Nuclear Information System (INIS)

Khan, B.; Bashir, R.; Khan, W.

2016-01-01

Medical evidence indicates that 60-80% of women can achieve vaginal delivery after a previous lower segment caesarean section. Proper selection of patients for trial of scar and vigilant monitoring during labour will achieve successful maternal and perinatal outcome. The objective of our study is to establish the fact that vaginal delivery after one caesarean section has a high success rate in patients with previous one caesarean section for non-recurrent cause. Methods: The study was conducted in Ayub Teaching Abbottabad, Gynae-B Unit. All labouring patients, during the study period of five years, with previous one caesarean section and between 37 weeks to 41 weeks of gestation for a non-recurrent cause were included in the study. Data was recorded on special proforma designed for the purpose. Patients who had previous classical caesarean section, more than one caesarean section, and previous caesarean section with severe wound infection, transverse lie and placenta previa in present pregnancy were excluded. Foetal macrosomia (wt>4 kg) and severe IUGR with compromised blood flow on Doppler in present pregnancy were also not considered suitable for the study. Patients who had any absolute contraindication for vaginal delivery were also excluded. Results: There were 12505 deliveries during the study period. Total vaginal deliveries were 8790 and total caesarean sections were 3715. Caesarean section rate was 29.7%. Out of these 8790 patients, 764 patients were given a trial of scar and 535 patients delivered successfully vaginally (70%). Women who presented with spontaneous onset of labour were more likely to deliver vaginally (74.8%) as compared to induction group (27.1%). Conclusion: Trial of vaginal birth after caesarean (VBAC) in selected cases has great importance in the present era of the rising rate of primary caesarean section. (author)

Study of functional-performance deficits in athletes with previous ankle sprains

Directory of Open Access Journals (Sweden)

hamid Babaee

2008-04-01

Full Text Available Abstract Background: Despite the importance of functional-performance deficits in athletes with history of ankle sprain few, studies have been carried out in this area. The aim of this research was to study relationship between previous ankle sprains and functional-performance deficits in athletes. Materials and methods: The subjects were 40 professional athletes selected through random sampling among volunteer participants in soccer, basketball, volleyball and handball teams of Lorestan province. The subjects were divided into 2 groups: Injured group (athletes with previous ankle sprains and healthy group (athletes without previous ankle sprains. In this descriptive study we used Functional-performance tests (figure 8 hop test and side hop test to determine ankle deficits and limitations. They participated in figure 8 hop test including hopping in 8 shape course with the length of 5 meters and side hop test including 10 side hop repetitions in course with the length of 30 centimeters. Time were recorded via stopwatch. Results: After data gathering and assessing information distributions, Pearson correlation was used to assess relationships, and independent T test to assess differences between variables. Finally the results showed that there is a significant relationship between previous ankle sprains and functional-performance deficits in the athletes. Conclusion: The athletes who had previous ankle sprains indicated functional-performance deficits more than healthy athletes in completion of mentioned functional-performance tests. The functional-performance tests (figure 8 hop test and side hop test are sensitive and suitable to assess and detect functional-performance deficits in athletes. Therefore we can use the figure 8 hop and side hop tests for goals such as prevention, assessment and rehabilitation of ankle sprains without spending too much money and time.

Perceived Work Conditions and Turnover Intentions: The Mediating Role of Meaning of Work

Science.gov (United States)

Arnoux-Nicolas, Caroline; Sovet, Laurent; Lhotellier, Lin; Di Fabio, Annamaria; Bernaud, Jean-Luc

2016-01-01

Perceived working conditions lead to various negative outcomes for employee behaviors, including turnover intentions. Although potential mediators for these relationships were previously identified, the importance of meaning of work has not yet been investigated. This study examines the role of this psychological resource as a mediator for the relationships between perceived working conditions and turnover intentions in a sample of 336 French workers from different job contexts. Results show that adverse working conditions were positively and significantly associated with turnover intentions. Meaning of work is negatively related to both perceived working conditions and turnover intentions. Mediation analyses for meaning of work demonstrated indirect effects of several adverse working conditions on turnover intentions. The role of meaning of work as a psychological resource for employees facing adverse working conditions is discussed, especially regarding its implications for research and practice within organizational contexts. PMID:27242616

Perceived Work Conditions and Turnover Intentions: The Mediating Role of Meaning of Work.

Science.gov (United States)

Arnoux-Nicolas, Caroline; Sovet, Laurent; Lhotellier, Lin; Di Fabio, Annamaria; Bernaud, Jean-Luc

2016-01-01

Perceived working conditions lead to various negative outcomes for employee behaviors, including turnover intentions. Although potential mediators for these relationships were previously identified, the importance of meaning of work has not yet been investigated. This study examines the role of this psychological resource as a mediator for the relationships between perceived working conditions and turnover intentions in a sample of 336 French workers from different job contexts. Results show that adverse working conditions were positively and significantly associated with turnover intentions. Meaning of work is negatively related to both perceived working conditions and turnover intentions. Mediation analyses for meaning of work demonstrated indirect effects of several adverse working conditions on turnover intentions. The role of meaning of work as a psychological resource for employees facing adverse working conditions is discussed, especially regarding its implications for research and practice within organizational contexts.

Cutaneous blood flow. A comparative study between the thermal recovery method and the radioxenon clearance method

Energy Technology Data Exchange (ETDEWEB)

Tavares, C M; Ferreira, J M; Fernandes, F V

1975-01-01

Since 1968 a thermal recovery method to study the cutaneous circulation has been utilized in the detection of skin circulation changes caused by certain pharmacological agents or by some pathological conditions. This method is based in the determination of the thermal recuperation of a small area of the skin previously cooled. In this work, we want to present the results of a comparative analysis between the thermal recovery method and the clearance of the radioactive xenon injected intracutaneously. The study was performed in the distal extremity of the lower limbs in 16 normal subjects, 16 hyperthyroid patients with increased cutaneous temperature and 11 patients with presumably low cutaneous blood flow (3 patients with hypothyroidism and 8 with obstructive arteriosclerosis).

Improved method for SNR prediction in machine-learning-based test

NARCIS (Netherlands)

Sheng, Xiaoqin; Kerkhoff, Hans G.

2010-01-01

This paper applies an improved method for testing the signal-to-noise ratio (SNR) of Analogue-to-Digital Converters (ADC). In previous work, a noisy and nonlinear pulse signal is exploited as the input stimulus to obtain the signature results of ADC. By applying a machine-learning-based approach,

Application of Human Factors Methods to Design Healthcare Work Systems: Instance of the prevention of Adverse Drug Events.

Science.gov (United States)

Marcilly, Romaric; Beuscart-Zephir, Marie-Catherine

2015-01-01

Human Factors (HF) methods are increasingly needed to support the design of new technologies in order to avoid that introducing those technologies into healthcare work systems induces use errors with potentially catastrophic consequences for the patients. This chapter illustrates the application of HF methods in developing two health technologies aiming at securing the hospital medication management process. Lessons learned from this project highlight the importance of (i) analyzing the work system in which the technology is intended to be implemented, (ii) involving end users in the design process and (iii) the intermediation role of HF between end users and scientific/technical experts.

JOYO MK-III modification work on heat transport system. Working plan and plant control

International Nuclear Information System (INIS)

Isozaki, K.; Ichige, S.; Ohshima, J.

2002-07-01

The MK-III project to improve the irradiation capability of the experimental fast reactor JOYO have been in underway since 1987. The increase of fast neutron flux and the enlargement of that field increase the reactor thermal rate from 100 MWt to 140 MWt. To increase cooling capacity of heat transport system, intermediate heat exchangers (IHXs), dump heat exchangers (DHXs), piping connecting to IHXs and DHXs, main motors on primary and secondary main circulation pumps were replaced. The replacement of these large components was carried out under following hard conditions. 1) Limitation of work space, 2) Fuel subassembly and molten sodium in the reactor vessel, 3) high radiation circumstances for primary cooling system, 4) treatment of radioactive sodium (radioactive sodium and corrosion product such as 60 Co, 54 Mn). There are little experiences of this kind of work in the world. Therefore the organization, working plan and safety management points were carefully examined and established, based on the previous experience of JOYO operation and maintenance, research and development results of safety treatment of sodium, experience of previous work on sodium facilities. Followings results were obtained and effectiveness was confirmed in the work. (1) Development of most suitable working plan derived from elements and full size mock up experiments, reduction of exposure time by workers training, reduction of radiation dose by installation of temporal radiation shielding were useful to reduce radiation dose. The usage of seal bag was useful to prevent the contamination spreading over. (2) The usage of seal bag, oxygen concentration monitoring in the seal bag, nitrogen concentration monitoring in the cooling system cover gas, low pressure control of cover gas were useful to reduce the inflow of oxygen to cooling system. (3) The bite cutting method for piping in air and press down cutting by roller cutter in the seal bag to prevent inflow of cutting piece, stopper

FY 1994 Annual Work Plan

Energy Technology Data Exchange (ETDEWEB)

1993-10-01

This is the third Office of Inspector General (OIG)Annual Work Plan. Its purpose is to summarize work completed in Fiscal Year (FY) 1993, identify ongoing projects from previous fiscal years which the OIG intends to continue into FY 1994, and announce planned projects which the OIG intends to begin in FY 19994.

To work or not to work in an extended working life?

OpenAIRE

Nilsson, Kerstin

2013-01-01

In most of the industrialised world, the proportion of older and retired people in the population is continuously increasing. This will have budgetary implications for maintaining the welfare state, because the active working section of the population must fund the non-active and old population. Aim: The overall aim of this thesis was to obtain knowledge about older workers’ work and life situation in association with their planning and decision to retire from working life. Method: Th...

Trephine Transverse Colostomy Is Effective for Patients Who Have Previously Undergone Rectal Surgery

Science.gov (United States)

Yeom, Seung-Seop; Jung, Sung Woo; Oh, Se Heon; Lee, Jong Lyul; Yoon, Yong Sik; Park, In Ja; Lim, Seok-Byung; Yu, Chang Sik; Kim, Jin Cheon

2018-01-01

Purpose Colostomy creation is an essential procedure for colorectal surgeons, but the preferred method of colostomy varies by surgeon. We compared the outcomes of trephine colostomy creation with open those for the (laparotomy) and laparoscopic methods and evaluated appropriate indications for a trephine colostomy and the advantages of the technique. Methods We retrospectively evaluated 263 patients who had undergone colostomy creation by trephine, open and laparoscopic approaches between April 2006 and March 2016. We compared the clinical features and the operative and postoperative outcomes according to the approach used for stoma creation. Results One hundred sixty-three patients (62%) underwent colostomy surgery for obstructive causes and 100 (38%) for fistulous problems. The mean operative time was significantly shorter with the trephine approach (trephine, 46.0 ± 1.9 minutes; open, 78.7 ± 3.9 minutes; laparoscopic, 63.5 ± 5.0 minutes; P colostomy was feasible for a diversion colostomy (P colostomy is safe and can be implemented quickly in various situations, and compared to other colostomy procedures, the patient’s recovery is faster. Previous laparotomy history was not a contraindication for a trephine colostomy, and a trephine transverse colostomy is feasible for patients who have undergone previous rectal surgery. PMID:29742862

Assessing and understanding sedentary behaviour in office-based working adults: a mixed-method approach

Directory of Open Access Journals (Sweden)

Clarice N. Waters

2016-04-01

Full Text Available Abstract Background Sedentary behaviours (SB can be characterized by low energy expenditure in a reclining position (e.g., sitting often associated with work and transport. Prolonged SB is associated with increased risk for chronic conditions, and due to technological advances, the working population is in office settings with high occupational exposure to SB. This study aims to assess SB among office workers, as well as barriers and strategies towards reducing SB in the work setting. Methods Using a mixed-methods approach guided by the socio-ecological framework, non-academic office workers from a professional school in a large public university were recruited. Of 180 eligible office workers, 40 enrolled and completed all assessments. Self-reported and objectively measured SB and activity levels were captured. Focus group discussion (FGD were conducted to further understand perceptions, barriers, and strategies to reducing workplace SB. Environmental factors were systematically evaluated by trained research staff using an adapted version of the Checklist for Health Promotion Environments at Worksites (CHEW. Thematic analysis of FGD was conducted and descriptive analysis of quantitative data was performed. Results The sample was mostly Chinese (n = 33, 80 % with a total of 24 (60 % female participants. Most participants worked five days a week for about 9.5(0.5 hrs/day. Accelerometer data show that participants spend the majority of their days in sedentary activities both on workdays (76.9 % and non-workdays (69.5 %. Self-report data confirm these findings with median sitting time of 420(180 minutes at work. From qualitative analyses, major barriers to reducing SB emerged, including the following themes: workplace social and cultural norms, personal factors, job scope, and physical building/office infrastructure. CHEW results confirm a lack of support from the physical infrastructure and information environment to reducing SB

Differences between Presentation Methods in Working Memory Procedures: A Matter of Working Memory Consolidation

OpenAIRE

Ricker, Timothy J.; Cowan, Nelson

2013-01-01

Understanding forgetting from working memory, the memory used in ongoing cognitive processing, is critical to understanding human cognition. In the past decade, a number of conflicting findings have been reported regarding the role of time in forgetting from working memory. This has led to a debate concerning whether longer retention intervals necessarily result in more forgetting. An obstacle to directly comparing conflicting reports is a divergence in methodology across studies. Studies tha...

Distributed Project Work

DEFF Research Database (Denmark)

Borch, Ole; Kirkegaard, B.; Knudsen, Morten

1998-01-01

Project work has been used for many years at Aalborg University to improve learning of theory and methods given in courses. In a closed environment where the students are forming a group in a single room, the interaction behaviour is more or less given from the natural life. Group work in a distr......Project work has been used for many years at Aalborg University to improve learning of theory and methods given in courses. In a closed environment where the students are forming a group in a single room, the interaction behaviour is more or less given from the natural life. Group work...... in a distributed fashion over the Internet needs more attention to the interaction protocol since the physical group room is not existing. The purpose in this paper is to develop a method for online project work by using the product: Basic Support for Cooperative Work (BSCV). An analysis of a well-proven protocol...... for information exchange in the traditional project environment is performed. A group of teachers and a student group using small project examples test the method. The first test group used a prototype for testing and found the new activity synchronization difficult to adapt, so the method was finally adjusted...

General Anisotropy Identification of Paperboard with Virtual Fields Method

Science.gov (United States)

J.M. Considine; F. Pierron; K.T. Turner; D.W. Vahey

2014-01-01

This work extends previous efforts in plate bending of Virtual Fields Method (VFM) parameter identification to include a general 2-D anisotropicmaterial. Such an extension was needed for instances in which material principal directions are unknown or when specimen orientation is not aligned with material principal directions. A new fixture with a multiaxial force...

Parents' work patterns and adolescent mental health.

Science.gov (United States)

Dockery, Alfred; Li, Jianghong; Kendall, Garth

2009-02-01

Previous research demonstrates that non-standard work schedules undermine the stability of marriage and reduce family cohesiveness. Limited research has investigated the effects of parents working non-standard schedules on children's health and wellbeing and no published Australian studies have addressed this important issue. This paper contributes to bridging this knowledge gap by focusing on adolescents aged 15-20 years and by including sole parent families which have been omitted in previous research, using panel data from the Household, Income and Labour Dynamics in Australia Survey. Multilevel linear regression models are estimated to analyse the association between parental work schedules and hours of work and measures of adolescents' mental health derived from the SF-36 Health Survey. Evidence of negative impacts of parents working non-standard hours upon adolescent wellbeing is found to exist primarily within sole parent families.

How Teachers Evaluate Their Work Style Depending on the Subject They Teach and Years of Work Experience

Science.gov (United States)

Perucica, Ranka

2017-01-01

In previous works we presented the studies that discussed how students evaluate their teachers and their style of teaching. To what extent their styles affect the students' attitudes to teaching, learning, success, motivation and the like. In this work we have tried to point out how teachers assess their style of work, depending on the subject…

Separability criteria and method of measurement for entanglement

Science.gov (United States)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati

2014-06-01

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method.

Separability criteria and method of measurement for entanglement

Energy Technology Data Exchange (ETDEWEB)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati [Industrial Computing Research Group, Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

2014-06-19

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method.

Separability criteria and method of measurement for entanglement

International Nuclear Information System (INIS)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati

2014-01-01

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method

Modelling of near-field radionuclide transport phenomena in a KBS-3V type of repository for nuclear waste with Goldsim Code - and verification against previous methods

International Nuclear Information System (INIS)

Pulkkanen, V.-M.; Nordman, H.

2010-03-01

Traditional radionuclide transport models overestimate significantly some phenomena, or completely ignore them. This motivates the development of new more precise models. As a result, this work is a description of commissioning of a new KBS-3V near-field radionuclide transport model, which has been done with a commercial software called GoldSim. According to earlier models, GoldSim model uses rz coordinates, but the solubilities of radionuclides have been treated more precisely. To begin with, the physical phenomena concerning near-field transport have been introduced according to GoldSim way of thinking. Also, the computational methods of GoldSim have been introduced and compared to methods used earlier. The actual verification of GoldSim model has been carried out by comparing the GoldSim results from simple cases to the corresponding results obtained with REPCOM, a software developed by VTT and used in several safety assessments. The results agree well. Finally, a few complicated cases were studied. In these cases, the REPCOM's limitations in handling of some phenomena become evident. The differences in the results are caused especially by the extension of the solubility limit to the whole computational domain, and the element-wise treatment of the solubilities which was used instead of nuclide-wise treatment. This work has been carried out as a special assignment to the former laboratory of Advanced Energy Systems in Helsinki University of Technology. The work was done at VTT. (orig.)

Groin Problems in Male Soccer Players Are More Common Than Previously Reported

DEFF Research Database (Denmark)

Harøy, Joar; Clarsen, Ben; Thorborg, Kristian

2017-01-01

surveillance method developed to capture acute and overuse problems. STUDY DESIGN: Descriptive epidemiology study. METHODS: We registered groin problems during a 6-week period of match congestion using the Oslo Sports Trauma Research Center Overuse Injury Questionnaire. A total of 240 players from 15 teams......BACKGROUND: The majority of surveillance studies in soccer have used a time-loss injury definition, and many groin problems result from overuse, leading to gradually increasing pain and/or reduced performance without necessarily causing an absence from soccer training or match play. Thus......, the magnitude of groin problems in soccer has probably been underestimated in previous studies based on traditional injury surveillance methods. PURPOSE: To investigate the prevalence of groin problems among soccer players of both sexes and among male soccer players at different levels of play through a new...

Working overtime hours: Relations with fatigue, work motivation, and the quality of work

NARCIS (Netherlands)

Beckers, DGJ; van der Linden, D; Smulders, PGW; Kompier, MAJ; van Veldhoven, MJPM; Van Yperen, NW

2004-01-01

Objectives: We sought to better understand the relationship between overtime and mental fatigue by taking into account work motivation and the quality of overtime work and studying theoretically derived subgroups. Methods: We conducted a survey-study among a representative sample of the Dutch

Development of nondestructive measurement of cold work rate, (2)

International Nuclear Information System (INIS)

Kamimura, Hideaki; Igarashi, Miyuki; Satoh, Masakazu; Miura, Makoto

1978-01-01

Cold-worked type 316 stainless steel will be used as fuel cladding material for the proto-type fast reactor MONJU. Cold work rate is an important parameter in swelling behavior of fuel cladding. It has been shown that austenitic stainless steel undergoes martensitic transformation during cold working. Nondestructive evaluation of cold work rate will be expected by measuring residual magnetism produced in the presence of martensitic phase when cold worked austenitic stainless steel is magnetized. In the previous work, the residual magnetism of cladding tubes of type 316 stainless steel was measured. The results have shown high degree of the correlation between residual magnetism and cold work rate. This paper reports the results of measurement on cold-rolled type 316 stainless steel plate samples. Dimensions of the specimens are 100 mm long and 3.5 and 7 mm wide. The apparatus and experimental procedures were similar to the previous work. Good agreement was found between the estimated cold work rate obtained in the previous work and that for cold rolled plate specimens. Measurement of residual magnetism in identical direction with magnetization showed smaller dispersion of data as compared with that in transverse direction. The residual magnetism near specimen surface hardly decreased when the surface of specimen was chemically removed. The reason for the comparative decrease in residual magnetism at 10% and 15% cold work rate is not clear. (Wakatsuki, Y.)

A METHOD OF AUTOMATIC DETERMINATION OF THE NUMBER OF THE ELECTRICAL MOTORS SIMULTANEOUSLY WORKING IN GROUP

Directory of Open Access Journals (Sweden)

A. V. Voloshko

2016-11-01

Full Text Available Purpose. Propose a method of automatic determination of the number of operating high voltage electric motors in the group of the same type based on the determination and analysis of the account data of power consumption, obtained from of electric power meters installed at the connection of motors. Results. The algorithm of the automatic determination program for the number of working in the same group of electric motors, which is based on the determination of the motor power minimum value at which it is considered on, was developed. Originality. For the first time a method of automatic determination of the number of working of the same type high-voltage motors group was proposed. Practical value. Obtained results may be used for the introduction of an automated accounting run of each motor, calculating the parameters of the equivalent induction motor or a synchronous motor.

PENGARUH WORK OVERLOAD DAN WORK FAMILY CONFLICT TERHADAP TURNOVER INTENTION YANG DIMEDIASI OLEH WORK EXHAUSTION

Directory of Open Access Journals (Sweden)

Nurul Hidayatin Nisa

2016-01-01

Full Text Available The purpose of this research was to examine factors that determine turnover intention in medical representative at PT. APL. To be known before that medical representatives have high percentage in turnover. The research using work exhaustion as mediation to determine the relationship between works overload and work family conflict of turnover intention. Research method is quantitative approach in causal research. The analysis tools are AMOS and T-Sobel. Findings of this research are both work overload and work family conflict berpengaruh with work exhaustion and turnover intention, work exhaustion mediated work overload and work family conflict over turnover intention.

METHOD DELAING WITH THE PROBLEM OF DOWEL BAR CONNECTIONS DURING THE RESTORATION WORK IN PREOBRAZHENSKAYA CHURCH IN KIZHI ISLAND

Directory of Open Access Journals (Sweden)

Алёна Юрьевна Лазарева

2016-05-01

Full Text Available In this paper we make an attempt to chose and justify the method for the solution of the dowel bars connection problem in diagonal walls when carrying out restoration work on the Preobrazhenskaya Church in Kizhi. Since 1980, the church has experiances multiple restoration works. At the moment, it is restored in most of the structural zones and it is required to choose the most optimal scheme and install pegs, and their numbers increase in the average to complete the quadrangle at the top of the octagon. Consequently, the study identifies the causes of large deformations of the church as a result of detailed examination. Moreover, it was found out that the most effective method for solution of dowel bar construction is the Monte Carlo method, which allows finding applying by the method of mathematical modeling.

Exploring the Gendering of Space by Using Memory Work as a Reflexive Research Method

Directory of Open Access Journals (Sweden)

Lia Bryant

2007-09-01

Full Text Available How can memory work be used as a pathway to reflect on the situatedness of the researcher and field of inquiry? The key aim of this article is to contribute to knowledge about the gendering of space developed by feminist geographers by using memory work as a reflexive research method. The authors present a brief review of feminist literature that covers the local and global symbolic meanings of spaces and the power relations within which space is experienced. From the literature they interpret themes of the interconnections between space, place, and time; sexualization of public space; and the bodily praxis of using space. Memories of gendered bodies and landscapes, movement and restricted space, and the disrupting of space allow the exploration of conceptualizations within the literature as active, situated, fragmented, and contextualized.

Gender and Work in Capitalist Economies

OpenAIRE

Odih, Pamela

2007-01-01

From the industrial revolution through to more recent advances in information technology, radical changes in working practices have accelerated rates of production to previously unimaginable levels. The establishment of wage relations, in the second half of the 19th Century, precipitated the rise of the 'employment society' and a movement towards synchronized work. Industrialization epitomized the capitalist definition of work time. \\ud \\ud In Gender and Work in Capitalist Economies, Pamela O...

Methods Used to Estimate Achievement Effects in Personalized Learning Schools. Working Paper WR-1061-BMGF

Science.gov (United States)

Pane, John F.; Baird, Matthew

2014-01-01

The purpose of this document is to describe the methods RAND used to analyze achievement for 23 personalized learning (PL) schools for the 2012-13 through 2013-14 academic years. This work was performed at the request of the Bill & Melinda Gates Foundation (BMGF), as part of a multi-year evaluation contract. The 23 schools were selected from a…

An Improved Conceptually-Based Method for Analysis of Communication Network Structure of Large Complex Organizations.

Science.gov (United States)

Richards, William D., Jr.

Previous methods for determining the communication structure of organizations work well for small or simple organizations, but are either inadequate or unwieldy for use with large complex organizations. An improved method uses a number of different measures and a series of successive approximations to order the communication matrix such that…

Improving of the working process of axial compressors of gas turbine engines by using an optimization method

Science.gov (United States)

Marchukov, E.; Egorov, I.; Popov, G.; Baturin, O.; Goriachkin, E.; Novikova, Y.; Kolmakova, D.

2017-08-01

The article presents one optimization method for improving of the working process of an axial compressor of gas turbine engine. Developed method allows to perform search for the best geometry of compressor blades automatically by using optimization software IOSO and CFD software NUMECA Fine/Turbo. Optimization was performed by changing the form of the middle line in the three sections of each blade and shifts of three sections of the guide vanes in the circumferential and axial directions. The calculation of the compressor parameters was performed for work and stall point of its performance map on each optimization step. Study was carried out for seven-stage high-pressure compressor and three-stage low-pressure compressors. As a result of optimization, improvement of efficiency was achieved for all investigated compressors.

Survival after early-stage breast cancer of women previously treated for depression

DEFF Research Database (Denmark)

Suppli, Nis Frederik Palm; Johansen, Christoffer; Kessing, Lars Vedel

2017-01-01

treatment of depression and risk of receiving nonguideline treatment of breast cancer were assessed in multivariable logistic regression analyses. We compared the overall survival, breast cancer-specific survival, and risk of death by suicide of women who were and were not treated for depression before......Purpose The aim of this nationwide, register-based cohort study was to determine whether women treated for depression before primary early-stage breast cancer are at increased risk for receiving treatment that is not in accordance with national guidelines and for poorer survival. Material...... and Methods We identified 45,325 women with early breast cancer diagnosed in Denmark from 1998 to 2011. Of these, 744 women (2%) had had a previous hospital contact (as an inpatient or outpatient) for depression and another 6,068 (13%) had been treated with antidepressants. Associations between previous...

Impact of previously disadvantaged land-users on sustainable ...

African Journals Online (AJOL)

Impact of previously disadvantaged land-users on sustainable agricultural ... about previously disadvantaged land users involved in communal farming systems ... of input, capital, marketing, information and land use planning, with effect on ...

Underwater and Dive Station Work-Site Noise Surveys

National Research Council Canada - National Science Library

Wolgemuth, Keith S; Cudahy, Edward A; Schwaller, Derek W

2008-01-01

Previous work performed by the Naval Submarine Medical Research Laboratory (NSMRL) had developed in-water permissible continuous noise exposure guidance Work performed by the Navy Experimental Diving Unit...

Previous induced abortion among young women seeking abortion-related care in Kenya: a cross-sectional analysis.

Science.gov (United States)

Kabiru, Caroline W; Ushie, Boniface A; Mutua, Michael M; Izugbara, Chimaraoke O

2016-05-14

Unsafe abortion is a leading cause of death among young women aged 10-24 years in sub-Saharan Africa. Although having multiple induced abortions may exacerbate the risk for poor health outcomes, there has been minimal research on young women in this region who have multiple induced abortions. The objective of this study was therefore to assess the prevalence and correlates of reporting a previous induced abortion among young females aged 12-24 years seeking abortion-related care in Kenya. We used data on 1,378 young women aged 12-24 years who presented for abortion-related care in 246 health facilities in a nationwide survey conducted in 2012. Socio-demographic characteristics, reproductive and clinical histories, and physical examination assessment data were collected from women during a one-month data collection period using an abortion case capture form. Nine percent (n = 98) of young women reported a previous induced abortion prior to the index pregnancy for which they were receiving care. Statistically significant differences by previous history of induced abortion were observed for area of residence, religion and occupation at bivariate level. Urban dwellers and unemployed/other young women were more likely to report a previous induced abortion. A greater proportion of young women reporting a previous induced abortion stated that they were using a contraceptive method at the time of the index pregnancy (47 %) compared with those reporting no previous induced abortion (23 %). Not surprisingly, a greater proportion of young women reporting a previous induced abortion (82 %) reported their index pregnancy as unintended (not wanted at all or mistimed) compared with women reporting no previous induced abortion (64 %). Our study results show that about one in every ten young women seeking abortion-related care in Kenya reports a previous induced abortion. Comprehensive post-abortion care services targeting young women are needed. In particular, post

20 CFR 604.5 - Application-availability for work.

Science.gov (United States)

2010-04-01

... individual, the commuting distance from the individual's home to the job, the previous work history of the... actively seeking work to be considered available for work, or States may impose a separate requirement that... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Application-availability for work. 604.5...

Does Leaders' Health (and Work-Related Experiences) Affect their Evaluation of Followers' Stress?

OpenAIRE

Giorgi, Gabriele; Mancuso, Serena; Fiz Perez, Francisco Javier; Montani, Francesco; Courcy, Francois; Arcangeli, Giulio

2015-01-01

Background: Stressed workers suffer from severe health problems which appear to have increased. Poor leadership is especially considered a source of stress. Indeed, supervisors might perceive their subordinates to be similar to them as far as stress is concerned and this might more widespread in organizations than previously thought. Methods: The present research investigates the relationships between leaders' health, in terms of work-related stress, mental health, and workplace bullying a...

Biopsy Needle Localization and Tracking Using ROI-RK Method

Directory of Open Access Journals (Sweden)

Yue Zhao

2014-01-01

Full Text Available ROI-RK method is a biopsy needle localization and tracking method. Previous research work has proved that it has a robust performance on different series of simulated 3D US volumes. Unfortunately, in real situations, because of the strong speckle noise of the ultrasound image and the different echogenic properties of the tissues, the real 3D US volumes have more complex background than the simulated images used previously. In this paper, to adapt the ROI-RK method in real 3D US volumes, a line-filter enhancement calculation only in the ROI is added to increase the contrast between the needle and background tissue, decreasing the phenomenon of expansion of the biopsy needle due to reverberation of ultrasound in the needle. To make the ROI-RK method more stable, a self-correction system is also implemented. Real data have been acquired on an ex vivo heart of lamb. The result of the ROI-RK method shows that it is capable to localize and track the biopsy needle in real situations, and it satisfies the demand of real-time application.

Influence of Previous Knowledge, Language Skills and Domain-specific Interest on Observation Competency

Science.gov (United States)

Kohlhauf, Lucia; Rutke, Ulrike; Neuhaus, Birgit

2011-10-01

Many epoch-making biological discoveries (e.g. Darwinian Theory) were based upon observations. Nevertheless, observation is often regarded as `just looking' rather than a basic scientific skill. As observation is one of the main research methods in biological sciences, it must be considered as an independent research method and systematic practice of this method is necessary. Because observation skills form the basis of further scientific methods (e.g. experiments or comparisons) and children from the age of 4 years are able to independently generate questions and hypotheses, it seems possible to foster observation competency at a preschool level. To be able to provide development-adequate individual fostering of this competency, it is first necessary to assess each child's competency. Therefore, drawing on the recent literature, we developed in this study a competency model that was empirically evaluated within learners ( N = 110) from different age groups, from kindergarten to university. In addition, we collected data on language skills, domain-specific interest and previous knowledge to analyse coherence between these skills and observation competency. The study showed as expected that previous knowledge had a high impact on observation competency, whereas the influence of domain-specific interest was nonexistent. Language skills were shown to have a weak influence. By utilising the empirically validated model consisting of three dimensions (`Describing', `Scientific reasoning' and `Interpreting') and three skill levels, it was possible to assess each child's competency level and to develop and evaluate guided play activities to individually foster a child's observation competency.

The application of nursing process method in training nurses working in the department of interventional radiology

International Nuclear Information System (INIS)

Ni Daihui; Wang Hongjuan; Yang Yajuan; Ye Rui; Qu Juan; Li Xinying; Xu Ying

2010-01-01

Objective: To describe the training procedure,typical training method and the clinical effect of nursing process method which was used to cultivate nurses working in the interventional ward. Methods: According to the evaluation index, the authors made a detail assessment of each nurse and found out individually the problems which needed to be perfected, then, the practicable measures were made for each individual nurse, after the training course the clinical results were evaluated. Results: After the nurses on different technical levels were cultivated with nursing process method, the comprehensive quality of each nurse was improved in different degree, and the general nursing quality of entire Department was also markedly improved. Conclusion: By using the nursing process method the cultivating period can be effectively shortened, the possible waste of time, manpower, material and energy cause by the blind training plan can be avoided. (authors)

Worker programs and resource use: Evidence from better work jordan

Science.gov (United States)

Robins, Nathan

This paper examines data collected for the Better Work program in Jordan which aims to protect laborers in the garment industry from poor working conditions. Data are examined to look for benefits to the factories participating in the program beyond improved compliance with labor law. In particular, potential impacts to firm energy use are examined and correlations are tested between electricity use rates and measures of worker outcomes and a number of factory traits such as size and production input costs. Evidence was found to back up work done in Vietnam with regard to resource use and distribution of electricity expenses. It was also found that the type of data being collected is not ideal for examinations of energy, and more direct methods are desirable, and that considerable production obstacles are worker skill level, electricity prices, and to a greater degree in Jordan than in previously examined countries, water prices.

Method for Estimating Optimum Free Resonant Frequencies in Overcoupled WPT System

Directory of Open Access Journals (Sweden)

Dong-Wook Seo

2017-01-01

Full Text Available In our previous work, we proposed the method to maximize the output power even in the overcoupled state of the wireless power transfer (WPT system by controlling free resonant frequencies and derived closed-form expression for optimum free resonant frequencies of the primary and secondary resonators. In this paper, we propose the mutual coupling approach to derive the optimum free resonant frequencies and show the measured power transfer efficiency (PTE using the transmission efficiency as well as the system energy efficiency. The results of the proposed approach exactly coincide with those of the previous work, and the fabricated prototype achieves the transmission efficiency of about 80% by tuning the free resonant frequencies to the optimum values in the overcoupled state.

Efficacy of Medication and Nonmedication Methods on Working Memory of Children With Attention Deficit and Hyperactivity Disorder

Directory of Open Access Journals (Sweden)

Ahmadpanah

2015-05-01

Full Text Available Background Working memory is the ability to keep and manipulate information in a short time. Children with attention deficit and hyperactivity disorder (ADHD are among the people suffering from deficiency in the active memory, and this deficiency has been attributed to the problem of frontal lobe. This study utilized a new approach with suitable tasks and methods for training active memory and assessment of its effects. Objectives This study aimed to investigate the effectiveness of medicinal and behavioral therapies on working memory of children with attention deficit and hyperactivity disorder. Patients and Methods The children participating in this study were 7 - 15 years old, and were diagnosed with ADHD by the psychiatrist and psychologist based on DSM-IV criteria. The intervention group comprised 8 boys and 6 girls with the average age of 11 (± 2 years, and the control group comprised 2 girls and 5 boys with an average age of 11.4 (± 3. Three children in the test group and 2 in the control group were under medicinal therapy. Results Training of working memory significantly improved the performance in nontrained areas as visual-spatial working memory as well as the performance in Raven progressive tests which are a perfect example of nonverbal, complicated reasoning tasks. Conclusions The performance of working memory improved through training, and these trainings extended to other areas of cognition functions not receiving any training. Trainings resulted in the improvement of performance in the tasks related to prefrontal area. They had also a positive and significant impact on the movement activities of hyperactive children.

Clinical evaluation of postural posture of patients with previous stroke subjected to early rehabilitation

Directory of Open Access Journals (Sweden)

Anna Sagan

2018-02-01

Full Text Available Introduction: Impairment disorders are often found in patients with stroke and impairment of motor and cognitive functions. This is a very serious complication because, by imposing a motor impairment, it aggravates the condition of disability and makes it difficult to conduct physical rehabilitation.The resulting neurological deficits due to stroke determine functional disorders. The possibility of locomotion is usually compromised, therefore the risk of falls increases significantly. The aim of the work is to present Postural Assesment Scale for Strock PASS with the postural stroke assessment scale, the impact of early rehabilitation of patients staying in the neurology ward.Material and methods: Postural examination was carried out among 17 people, of which 8 were women, and 9 were male. The study was divided into two stages. The first stage occurred immediately after the stroke and the second one before the patient was discharged from the ward. Research was carried out at the Biegański Specialist Hospital in Grudziądz in the Department of Neurology and Clinical Neuroimmunology and Impact Department.Conclusions: The results of the postural studies carried out in people with previous stroke subjected to early physiotherapy have a beneficial effect of the conducted therapy. There are positive changes between the first and the final examination of the patients.

Determining root correspondence between previously and newly detected objects

Science.gov (United States)

Paglieroni, David W.; Beer, N Reginald

2014-06-17

A system that applies attribute and topology based change detection to networks of objects that were detected on previous scans of a structure, roadway, or area of interest. The attributes capture properties or characteristics of the previously detected objects, such as location, time of detection, size, elongation, orientation, etc. The topology of the network of previously detected objects is maintained in a constellation database that stores attributes of previously detected objects and implicitly captures the geometrical structure of the network. A change detection system detects change by comparing the attributes and topology of new objects detected on the latest scan to the constellation database of previously detected objects.

The Effects of Presentation Method and Information Density on Visual Search Ability and Working Memory Load

Science.gov (United States)

Chang, Ting-Wen; Kinshuk; Chen, Nian-Shing; Yu, Pao-Ta

2012-01-01

This study investigates the effects of successive and simultaneous information presentation methods on learner's visual search ability and working memory load for different information densities. Since the processing of information in the brain depends on the capacity of visual short-term memory (VSTM), the limited information processing capacity…

Sex ratio at birth in India, its relation to birth order, sex of previous children and use of indigenous medicine.

Directory of Open Access Journals (Sweden)

Samiksha Manchanda

Full Text Available OBJECTIVE: Sex-ratio at birth in families with previous girls is worse than those with a boy. Our aim was to prospectively study in a large maternal and child unit sex-ratio against previous birth sex and use of traditional medicines for sex selection. MAIN OUTCOME MEASURES: Sex-ratio among mothers in families with a previous girl and in those with a previous boy, prevalence of indigenous medicine use and sex-ratio in those using medicines for sex selection. RESULTS: Overall there were 806 girls to 1000 boys. The sex-ratio was 720:1000 if there was one previous girl and 178:1000 if there were two previous girls. In second children of families with a previous boy 1017 girls were born per 1000 boys. Sex-ratio in those with one previous girl, who were taking traditional medicines for sex selection, was 928:1000. CONCLUSION: Evidence from the second children clearly shows the sex-ratio is being manipulated by human interventions. More mothers with previous girls tend to use traditional medicines for sex selection, in their subsequent pregnancies. Those taking such medication do not seem to be helped according to expectations. They seem to rely on this method and so are less likely use more definitive methods like sex selective abortions. This is the first such prospective investigation of sex ratio in second children looked at against the sex of previous children. More studies are needed to confirm the findings.

Intrinsic Work Value-Reward Dissonance and Work Satisfaction during Young Adulthood

Science.gov (United States)

Porfeli, Erik J.; Mortimer, Jeylan T.

2010-01-01

Previous research suggests that discrepancies between work values and rewards are indicators of dissonance that induce change in both to reduce such dissonance over time. The present study elaborates this model to suggest parallels with the first phase of the extension-and-strain curve. Small discrepancies or small increases in extension are…

FORECASTING THE CHANGE IN THE TEACHER'S CONTRIBUTION TO THE WORK OF THE DEPARTMENT USING THE METHODS OF DATA MINING

Directory of Open Access Journals (Sweden)

Oleksandr Yu. Melnykov

2018-02-01

Full Text Available The existing forms and methods of assessing the work of teachers of higher educational institutions are described. The conclusion is made that the combination of indicators into groups (categories and the introduction of different weight factors depends on the specifics of the institution and the prevailing ideas about the priority of this or that type of activity. Practically all the considered methods do not take into account the change in the contribution share of each teacher in the integral indicator of the work of the whole department (department, faculty. The goal was to predict the change in the contribution of an individual teacher to the indicators of a higher education institution by means of mathematical modeling and intellectual decision-making. The prediction task is identified as a suitable data mining task. Methods for forecasting the assessment of the work of teachers - regression and neural network - were chosen. An object-oriented model of a projected computer system in the language of visual modeling of UML is described. Diagrams of use cases, classes and states are given. The program implementation of the intellectual decision-making system for evaluating the work of teachers of a higher education institution and an example of the system's operation based on real data are described. Conclusions are made about a possible change in the contribution share of each teacher in the indicators of the department.

In search of a representative sample of residential building work.

Science.gov (United States)

Lobb, Brenda; Woods, Gregory R

2012-09-01

Most research investigating injuries in construction work is limited by reliance on work samples unrepresentative of the multiple, variable-cycle tasks involved, resulting in incomplete characterisation of ergonomic exposures. In this case study, a participatory approach was used including hierarchical task analysis and site observations of a typical team of house builders in New Zealand, over several working days, to obtain a representative work sample. The builders' work consisted of 14 goal-defined jobs using varying subsets of 15 task types, each taking from less than 1 s to more than 1 h and performed in a variety of postures. Task type and duration varied within and between participants and days, although all participants spent at least 25% of the time moving from place to place, mostly carrying materials, and more than half the time either reaching up or bending down to work. This research has provided a description of residential building work based on a work sample more nearly representative than those previously published and has demonstrated a simple, low-cost but robust field observation method that can provide a valid basis for further study of hazard exposures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An inverse method for radiation transport

Energy Technology Data Exchange (ETDEWEB)

Favorite, J. A. (Jeffrey A.); Sanchez, R. (Richard)

2004-01-01

Adjoint functions have been used with forward functions to compute gradients in implicit (iterative) solution methods for inverse problems in optical tomography, geoscience, thermal science, and other fields, but only once has this approach been used for inverse solutions to the Boltzmann transport equation. In this paper, this approach is used to develop an inverse method that requires only angle-independent flux measurements, rather than angle-dependent measurements as was done previously. The method is applied to a simplified form of the transport equation that does not include scattering. The resulting procedure uses measured values of gamma-ray fluxes of discrete, characteristic energies to determine interface locations in a multilayer shield. The method was implemented with a Newton-Raphson optimization algorithm, and it worked very well in numerical one-dimensional spherical test cases. A more sophisticated optimization method would better exploit the potential of the inverse method.

Degassification and methane drainage in thick and vertical coal seams worked by horizontal sublevel caving method; Drenaje y Desgasificacion de Grisu en Capas de Carbon Potentes y Verticales, Explotadas por subniveles Horizontales con sutiraje

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The present trend of the working in spanish coal underground mines is directed towards the utilization, if the deposit characteristics permit it, of mining method by horizontal sublevels with caving. The application of this method involves an important coal volume in specific situations inside the workings cycle (shots, roof cavings, workings beginning, etc). Therefore, those considerable quantities of coal put into circulation, joined to high firedamp concentration desorbable of coal seam, produce in a instantaneous way large volumes of firedamp in the mine atmosphere with the consequent associated risk for the mine people, the stoppage of the works and its evacuation. These aforementioned risks could be avoided, or at least decreased to a great extent, through a methane capture before its circulation in openings caused by the mining works or by draining from accumulation rooms. During the last years, basically in EU countries, some researches have been accomplished about previous Degassification and methane capture in longwall faces of horizontal seams. In these researches have been studied the methane capture both from surface and from underground. In sublevel caving workings, substantially different from longwall faces workings, the techniques and capture systems utilized in the first one are not applicable to the second. The field works and measurements of this project have been mainly carried out in two mining companies located at the north of Spain, the Mina la Camocha S. A. and the S. A. Hullera Vasco Leonesa. Many methane capture tests by means of boreholes in coal seam have been carried out to determine the influence that capture boreholes exert in degassification of coal panel. Otherwise, many firedamp drainage tests in accumulation rooms have been also carried out, and a small-scale system that makes possible the capture in safe conditions have been defined and tested. (Author)

Health effects of wind turbines in working environments - a scoping review.

Science.gov (United States)

Freiberg, Alice; Schefter, Christiane; Girbig, Maria; Murta, Vanise Cleto; Seidler, Andreas

2018-01-23

Objectives The wind industry is a growing economic sector, yet there is no overview summarizing all exposures emanating from wind turbines throughout their life cycle that may pose a risk for workers` health. The aim of this scoping review was to survey and outline the body of evidence around the health effects of wind turbines in working environments in order to identify research gaps and to highlight the need for further research. Methods A scoping review with a transparent and systematic procedure was conducted using a comprehensive search strategy. Two independent reviewers conducted most of the review steps. Results Twenty articles of varying methodical quality were included. Our findings of the included studies indicate that substances used in rotor blade manufacture (epoxy resin and styrene) cause skin disorders, and respectively, respiratory ailments and eye complaints; exposure to onshore wind turbine noise leads to annoyance, sleep disorders, and lowered general health; finally working in the wind industry is associated with a considerable accident rate, resulting in injuries or fatalities. Conclusions Due to the different work activities during the life cycle of a wind turbine and the distinction between on- and offshore work, there are no specific overall health effects of working in the wind sector. Previous research has primarily focused on evaluating the effects of working in the wind industry on skin disorders, accidents, and noise consequences. There is a need for further research, particularly in studying the effect of wind turbine work on psychological and musculoskeletal disorders, work-related injury and accident rates, and health outcomes in later life cycle phases.

Generational differences in employee work values : an explorative study in a Norwegian work context

OpenAIRE

Sillerud, Henriette

2012-01-01

In an increasingly knowledge intensive economy, it is essential to determine what drives knowledge workers into action and motivate them to excel. According to the value- based view on motivation, work values underlie these mechanisms and work value differences are therefore important to consider where they appear. In the present research, the potential effect of generation was examined. While previous research suggests that generational differences exists, there have been conflicting finding...

Is parental competitive ability in winter negatively affected by previous springs' family size?

Science.gov (United States)

Fokkema, Rienk W; Ubels, Richard; Tinbergen, Joost M

2017-03-01

Reproductive behavior cannot be understood without taking the local level of competition into account. Experimental work in great tits ( Parus major ) showed that (1) a survival cost of reproduction was paid in environments with high levels of competition during the winter period and (2) experimentally manipulated family size negatively affected the ability of parents to compete for preferred breeding boxes in the next spring. The fact that survival was affected in winter suggests that the competitive ability of parents in winter may also be affected by previous reproductive effort. In this study, we aim to investigate whether (1) such carryover effects of family size on the ability of parents to compete for resources in the winter period occurred and (2) this could explain the occurrence of a survival cost of reproduction under increased competition. During two study years, we manipulated the size of in total 168 great tit broods. Next, in winter, we induced competition among the parents by drastically reducing the availability of roosting boxes in their local environment for one week. Contrary to our expectation, we found no negative effect of family size manipulation on the probability of parents to obtain a roosting box. In line with previous work, we did find that a survival cost of reproduction was paid only in plots in which competition for roosting boxes was shortly increased. Our findings thus add to the scarce experimental evidence that survival cost of reproduction are paid under higher levels of local competition but this could not be linked to a reduced competitive ability of parents in winter.

Psychosocial Factors at Work and Blood-Borne Exposure among Nurses

Directory of Open Access Journals (Sweden)

R Mehrdad

2014-01-01

Full Text Available Background: Exposure to human blood and body fluids is a common risk for nurses. Many factors can affect the prevalence and incidence of this occupational hazard. Psychosocial factors at work may be a risk factor for the exposure. Objective: To assess needle stick, sharp injury and mucus exposure to blood-borne pathogens among nurses in Iran and to determine the association between these exposures and psychosocial factors at work. Methods: A cross-sectional study was conducted on nurses in a public hospital, Tehran, Iran. 364 nurses received and 339 completed and returned a self-reported questionnaire containing demographic data, history of exposure to blood-borne pathogens at work during previous year and the General Nordic questionnaire for psychological and social factors at work (QPS Nordic 34+ Questionnaire. Results: Of 339 participants, 197 (58.1% reported needle-stick injury, 186 (54.6% reported another type of sharp injury, and 112 (33% reported a mucous membrane exposure during the previous year. More than half of the participants who had history of exposure, had not reported it. Those with middle or high level of stress had higher crude and adjusted odds than those with lower stress for all kinds of exposure. Adjusted odds ratios for high stress group (ranging from 2.8 to 4.4 were statistically different from 1. Conclusion: There is a high prevalence of needle-stick and sharp injury and mucous membrane exposure to patients' blood or body fluids among studied nurses. There is a significant association between increasing psychosocial factors at work and exposure to blood-borne pathogens among this group of nurses.

Patterns of multimorbidity in working Australians

Directory of Open Access Journals (Sweden)

Ng Shu-Kay

2011-06-01

Full Text Available Abstract Background Multimorbidity is becoming more prevalent. Previously-used methods of assessing multimorbidity relied on counting the number of health conditions, often in relation to an index condition (comorbidity, or grouping conditions based on body or organ systems. Recent refinements in statistical approaches have resulted in improved methods to capture patterns of multimorbidity, allowing for the identification of nonrandomly occurring clusters of multimorbid health conditions. This paper aims to identify nonrandom clusters of multimorbidity. Methods The Australian Work Outcomes Research Cost-benefit (WORC study cross-sectional screening dataset (approximately 78,000 working Australians was used to explore patterns of multimorbidity. Exploratory factor analysis was used to identify nonrandomly occurring clusters of multimorbid health conditions. Results Six clinically-meaningful groups of multimorbid health conditions were identified. These were: factor 1: arthritis, osteoporosis, other chronic pain, bladder problems, and irritable bowel; factor 2: asthma, chronic obstructive pulmonary disease, and allergies; factor 3: back/neck pain, migraine, other chronic pain, and arthritis; factor 4: high blood pressure, high cholesterol, obesity, diabetes, and fatigue; factor 5: cardiovascular disease, diabetes, fatigue, high blood pressure, high cholesterol, and arthritis; and factor 6: irritable bowel, ulcer, heartburn, and other chronic pain. These clusters do not fall neatly into organ or body systems, and some conditions appear in more than one cluster. Conclusions Considerably more research is needed with large population-based datasets and a comprehensive set of reliable health diagnoses to better understand the complex nature and composition of multimorbid health conditions.

Erlotinib-induced rash spares previously irradiated skin

International Nuclear Information System (INIS)

Lips, Irene M.; Vonk, Ernest J.A.; Koster, Mariska E.Y.; Houwing, Ronald H.

2011-01-01

Erlotinib is an epidermal growth factor receptor inhibitor prescribed to patients with locally advanced or metastasized non-small cell lung carcinoma after failure of at least one earlier chemotherapy treatment. Approximately 75% of the patients treated with erlotinib develop acneiform skin rashes. A patient treated with erlotinib 3 months after finishing concomitant treatment with chemotherapy and radiotherapy for non-small cell lung cancer is presented. Unexpectedly, the part of the skin that had been included in his previously radiotherapy field was completely spared from the erlotinib-induced acneiform skin rash. The exact mechanism of erlotinib-induced rash sparing in previously irradiated skin is unclear. The underlying mechanism of this phenomenon needs to be explored further, because the number of patients being treated with a combination of both therapeutic modalities is increasing. The therapeutic effect of erlotinib in the area of the previously irradiated lesion should be assessed. (orig.)

A comparison of morbidity associated with placenta previa with and without previous caesarean sections

International Nuclear Information System (INIS)

Baqai, S.; Siraj, A.; Noor, N.

2018-01-01

To compare the morbidity associated with placenta previa with and without previous caesarean sections. Study Design: Retrospective comparative study. Place and Duration of Study: From March 2014 till March 2016 in the department of Obstetrics and Gynaecology at PNS Shifa hospital Karachi. Material and Methods: After the approval from hospital ethical committee, antenatal patients with singleton pregnancy of gestational age >32 weeks, in the age group of 20-40 years diagnosed to have placenta previa included in the study. All patients with twin pregnancy less than 20 years and more than 40 years of age were excluded. The records of all patients fulfilling the inclusion criteria were reviewed. Data had been collected for demographic and maternal variables, placenta previa, history of previous lower segment caesarean section (LSCS), complications associated with placenta previa and techniques used to control blood loss were recorded. Results: During the study period, 6879 patients were delivered in PNS Shifa, out of these, 2060 (29.9%) had caesarean section out of these, 47.3% patients had previous history of LSCS. Thirty three (1.6%) patients were diagnosed to have placenta previa and frequency of placenta previa was significantly higher in patients with previous history of LSCS than previous normal delivery of LSCS i.e. 22 vs. 11 (p=0.023). It was observed that the frequency of morbidly adherent placenta (MAP) and Intensive care unit (ICU) stay were significantly higher in patients with previous history of LSCS than previous history of normal delivery. Conclusion: Frequency of placenta previa was significantly higher in patients with history of LSCS. Also placenta previa remains a major risk factor for various maternal complications. (author)

Layout optimization using the homogenization method

Science.gov (United States)

Suzuki, Katsuyuki; Kikuchi, Noboru

1993-01-01

A generalized layout problem involving sizing, shape, and topology optimization is solved by using the homogenization method for three-dimensional linearly elastic shell structures in order to seek a possibility of establishment of an integrated design system of automotive car bodies, as an extension of the previous work by Bendsoe and Kikuchi. A formulation of a three-dimensional homogenized shell, a solution algorithm, and several examples of computing the optimum layout are presented in this first part of the two articles.

Work-Family Conflict and the Perception of Departmental and Institutional Work-Family Policies in Collegiate Athletic Trainers

Science.gov (United States)

Godek, Michelle M.

2012-01-01

Employees throughout the United States struggle to balance their work and family commitments, in part because the workforce makeup has changed significantly over the last half century. The evolving family structure also has contributed to this struggle. This research seeks to build on previous work-family literature by incorporating the six…

Social Work or Relief Work? A Crisis in Professional Social Work

Directory of Open Access Journals (Sweden)

Adhikari Harasankar

2015-07-01

Full Text Available Social work is a sharing and caring profession based on scientific methods. This problem solving profession makes people self-reliant and self-dependent when he/she is in any sorts of crises. Thus, it differs from relief work, social services or social welfare delivered during emergence crises. This paper examined the application of professional social work as relief work, which did not bring any change among the beneficiaries; rather it set their mind as opportunist. For this purpose, the programme sponsored by the government of India and implemented by nongovernmental organizations for rehabilitation of the street children (i.e., pavements and slums dwellers, children of sex workers, and so forth of Metro cities like Kolkata had priority. This evaluative study assessed the progress and changes among 500 street children who were the beneficiaries for 10 years of the programme, selected according to their parental residents/occupation through stratified sampling. Interviews, case studies and group interaction were used to collect data on various aspects, i.e. personal background, education, and occupation of these children. It revealed that after almost 10 years of services, the problem of children was static. Firstly, service delivery system was as relief work. The methods of social work were not implied while the professionals were in implementation. On the other hand, the scope of monitoring and evaluation of the programme by government was suspended due to several reasons. Definitely, the politicalization in human development would be restricted. The problems of suffering would be root out and it should not be a continued process.

Methods to address ethical issues in Counterterrorisme : An overview of methods and tools used to address and manage ethical issues in healthcare, social work, police and the military

NARCIS (Netherlands)

Anke van Gorp; Stijn Hoorens

2017-01-01

Abstract Chapter 4: Basing ourselves on a literature review and expert interviews we create an overview of methods and tools to identify and respond to ethical questions used in healthcare, social work, police and the military. We identify six main types of methods or tools that can support

Studies on the zeros of Bessel functions and methods for their computation: 3. Some new works on monotonicity, convexity, and other properties

Science.gov (United States)

Kerimov, M. K.

2016-12-01

This paper continues the study of real zeros of Bessel functions begun in the previous parts of this work (see M. K. Kerimov, Comput. Math. Math. Phys. 54 (9), 1337-1388 (2014); 56 (7), 1175-1208 (2016)). Some new results regarding the monotonicity, convexity, concavity, and other properties of zeros are described. Additionally, the zeros of q-Bessel functions are investigated.

New Vehicle Detection Method with Aspect Ratio Estimation for Hypothesized Windows

Directory of Open Access Journals (Sweden)

Jisu Kim

2015-12-01

Full Text Available All kinds of vehicles have different ratios of width to height, which are called the aspect ratios. Most previous works, however, use a fixed aspect ratio for vehicle detection (VD. The use of a fixed vehicle aspect ratio for VD degrades the performance. Thus, the estimation of a vehicle aspect ratio is an important part of robust VD. Taking this idea into account, a new on-road vehicle detection system is proposed in this paper. The proposed method estimates the aspect ratio of the hypothesized windows to improve the VD performance. Our proposed method uses an Aggregate Channel Feature (ACF and a support vector machine (SVM to verify the hypothesized windows with the estimated aspect ratio. The contribution of this paper is threefold. First, the estimation of vehicle aspect ratio is inserted between the HG (hypothesis generation and the HV (hypothesis verification. Second, a simple HG method named a signed horizontal edge map is proposed to speed up VD. Third, a new measure is proposed to represent the overlapping ratio between the ground truth and the detection results. This new measure is used to show that the proposed method is better than previous works in terms of robust VD. Finally, the Pittsburgh dataset is used to verify the performance of the proposed method.

Data and methods to characterize the role of sex work and to inform sex work programs in generalized HIV epidemics: evidence to challenge assumptions.

Science.gov (United States)

Mishra, Sharmistha; Boily, Marie-Claude; Schwartz, Sheree; Beyrer, Chris; Blanchard, James F; Moses, Stephen; Castor, Delivette; Phaswana-Mafuya, Nancy; Vickerman, Peter; Drame, Fatou; Alary, Michel; Baral, Stefan D

2016-08-01

In the context of generalized human immunodeficiency virus (HIV) epidemics, there has been limited recent investment in HIV surveillance and prevention programming for key populations including female sex workers. Often implicit in the decision to limit investment in these epidemic settings are assumptions including that commercial sex is not significant to the sustained transmission of HIV, and HIV interventions designed to reach "all segments of society" will reach female sex workers and clients. Emerging empiric and model-based evidence is challenging these assumptions. This article highlights the frameworks and estimates used to characterize the role of sex work in HIV epidemics as well as the relevant empiric data landscape on sex work in generalized HIV epidemics and their strengths and limitations. Traditional approaches to estimate the contribution of sex work to HIV epidemics do not capture the potential for upstream and downstream sexual and vertical HIV transmission. Emerging approaches such as the transmission population attributable fraction from dynamic mathematical models can address this gap. To move forward, the HIV scientific community must begin by replacing assumptions about the epidemiology of generalized HIV epidemics with data and more appropriate methods of estimating the contribution of unprotected sex in the context of sex work. Copyright © 2016 Elsevier Inc. All rights reserved.

Applied probabilistic methods in the field of reactor safety in Germany

International Nuclear Information System (INIS)

Heuser, F.W.

1982-01-01

Some aspects of applied reliability and risk analysis methods in nuclear safety and the present role of both in Germany, are discussed. First, some comments on the status and applications of reliability analysis are given. Second, some conclusions that can be drawn from previous work on the German Risk Study are summarized. (orig.)

Student supervision as educational method in faculties of social work. A study in seven European countries

Directory of Open Access Journals (Sweden)

Godelieve van Hees

2011-03-01

Full Text Available Student supervision as educational method in faculties of social work. A study in seven European countries Supervision Meets Education (Van Hees & Geiβler-Piltz, 2010 is the title of a comparative study on the use of supervision in training social workers as part of the Bachelor degree programmes at seven European universities and universities of applied sciences. It is the first research project to be carried out by the Supervision in Social Work Education in Europe (SSWEE network. Supervision is seen as an educational method and to indicate this specific form of supervision, the term “student supervision” has been used. The results of the study are based on seven case studies and a comparative analysis to answer the question: how is supervision integrated into the curriculum and why is it done in this way? The second part of the study concerns a comparative analysis of the case studies. This article details the main results of the differences and similarities not only regarding the way that “supervision” is understood in various settings but also the variety of organizational approaches to supervision within the study programmes themselves. In conclusion, we can say that this description of “the current state of play” provides common ground from which one go on to develop student supervision methodology in the context of European Higher Education and the challenges of a changing profession. Opleidingssupervisie als didactische methode in opleidingen Sociaal Werk. Een zoektocht in zeven Europese landen Dit artikel doet verslag van een vergelijkende studie naar de praktijk van supervisie in de Bachelor Social Work aan zeven verschillende Europese universiteiten en hogescholen, genaamd Supervision Meets Education (Van Hees & Geiβler-Piltz, 2010. Het betreft een onderzoeksproject van het “Network Supervision in Social Work Education in Europe (SSWEE”. Supervisie wordt hier besproken als een didactische methode waarvoor in

Burnout in the working population: relations to psychosocial work factors.

Science.gov (United States)

Lindblom, Karin M; Linton, Steven J; Fedeli, Cecilia; Bryngelsson, Ing-Liss

2006-01-01

This study investigated levels of burnout in the general population irrespective of occupation and relations between burnout and psychosocial work factors. A cross-sectional survey featuring sleep problems, psychological distress, burnout (Maslach Burnout Inventory-General Survey), and psychosocial factors at work, was mailed to a random sample of 3,000 participants, aged 20-60. Response rate was 61%. A high level (18%), a low level (19%), and an intermediate group (63%) for burnout were constructed. The high level group was associated with those who were > 50 years old, women, those experiencing psychological distress, and those with a poor psychosocial work climate. The analyses on variables significant in previous analyses showed that the high level group was strongly related to high demands, low control, lack of social support, and disagreeing about values at the workplace even when accounting for age, gender, and psychological distress. We conclude that psychosocial work factors are important in association to burnout regardless of occupation.

Maintenance work management system

International Nuclear Information System (INIS)

Kanai, T.; Takahashi, Y.; Takahashi, K.; Nishino, M.; Takeshige, R.

2000-01-01

The maintenance work management system supports the efficient drawing up of various documents for the maintenance work at nuclear power stations and the speeding up of the permission procedure. In addition, it improves the quality assurance of the safety and reliability of the maintenance work. Key merits of the system are: 1. Efficiently drawing up various documents for the maintenance work by using the stored data for the previous maintenance work and the pipe and instrument diagram (P and ID) data. 2. Supporting the management work for the completion of maintenance work safety by using the isolation information stored on the computer system. 3. Speeding up the permission procedure by electronic mail and electronic permission. 4. Displaying additional information such as the specifications of equipment, maintenance result, and maintenance plan by linking up with the database of another system. 5. Reducing the cost of hardware devices by using client/server network configurations of personal computers and a personal computer server. (author)

Do Work Placements Improve Final Year Academic Performance or Do High-Calibre Students Choose to Do Work Placements?

Science.gov (United States)

Jones, C. M.; Green, J. P.; Higson, H. E.

2017-01-01

This study investigates whether the completion of an optional sandwich work placement enhances student performance in final year examinations. Using Propensity Score Matching, our analysis departs from the literature by controlling for self-selection. Previous studies may have overestimated the impact of sandwich work placements on performance…

Putting Knowledge to Work: Collaborating, Influencing and Learning ...

International Development Research Centre (IDRC) Digital Library (Canada)

2017-02-15

Feb 15, 2017 ... Download PDF ... Putting Knowledge to Work explores how the brains of such ... She previously worked with Statistics Canada, Graybridge Malkam, Citizenship and Immigration Canada, and Human Resources and Skills ...

Understanding Dieting and Previous Weight Loss Attempts among Overweight and Obese Participants: Insights into My Body Is Fit and Fabulous at Work Program.

Science.gov (United States)

Ismail, Tengku Alina Tengku; Jalil, Rohana Abdul; Wan Ishak, Wan Rosli; Hamid, Noor Fadzlina; Wan Nik, Wan Suriati; Jan Mohamed, Hamid Jan; Mohd, Nor Haslina; Arifin, Wan Nor; Mohamed, Wan Mohd Izani Wan; Ibrahim, Mohd Ismail; Ismail, Rohaida; Hassim, Tengku Fatimatul Tengku; Aris, Tahir; Wan Muda, Wan Manan

2018-01-01

A qualitative study providing an in-depth exploration of people's view and the increasing burden of overweight and obesity is required. This study aimed to explore the understanding of dieting and previous experiences on weight loss attempts among overweight and obese government employees in Kelantan, Malaysia, prior to recruitment into the intervention program. Thirteen focus group discussions involving 129 participants from a weight-loss intervention program were conducted within the first 1 month of recruitment. These discussions were moderated by two trained researchers in the Malay language and assisted by an interview guide. They were audio-recorded and transcribed verbatim. A thematic analysis was performed, and codes and themes from each discussion were constructed. The participants understood dieting with various meanings, including skipping meals and removing rice from daily diets. They applied numerous methods to lose weight and achieved various outcomes. Health and appearance, social support, and compliance with current trends were the factors motivating these participants to lose weight. Their determination to lose weight was limited by lack of self-control and motivation, experiences of unpleasant effects, influence on weight, and environmental and health factors. Real-life weight loss experiences and perceptions provided relevant insights into current weight loss management strategies. Some of these issues and misunderstandings should be emphasized in weight loss strategies during health promotion.

Treatment response in psychotic patients classified according to social and clinical needs, drug side effects, and previous treatment; a method to identify functional remission.

Science.gov (United States)

Alenius, Malin; Hammarlund-Udenaes, Margareta; Hartvig, Per; Sundquist, Staffan; Lindström, Leif

2009-01-01

Various approaches have been made over the years to classify psychotic patients according to inadequate treatment response, using terms such as treatment resistant or treatment refractory. Existing classifications have been criticized for overestimating positive symptoms; underestimating residual symptoms, negative symptoms, and side effects; or being to open for individual interpretation. The aim of this study was to present and evaluate a new method of classification according to treatment response and, thus, to identify patients in functional remission. A naturalistic, cross-sectional study was performed using patient interviews and information from patient files. The new classification method CANSEPT, which combines the Camberwell Assessment of Need rating scale, the Udvalg for Kliniske Undersøgelser side effect rating scale (SE), and the patient's previous treatment history (PT), was used to group the patients according to treatment response. CANSEPT was evaluated by comparison of expected and observed results. In the patient population (n = 123), the patients in functional remission, as defined by CANSEPT, had higher quality of life, fewer hospitalizations, fewer psychotic symptoms, and higher rate of workers than those with the worst treatment outcome. In the evaluation, CANSEPT showed validity in discriminating the patients of interest and was well tolerated by the patients. CANSEPT could secure inclusion of correct patients in the clinic or in research.

Analysis and development of the method for calculating calibration of the working plank in the cold tube roller rolling mills

Directory of Open Access Journals (Sweden)

S. V. Pilipenko

2017-05-01

Full Text Available Analysis and development of the existing method of calculation of the calibrated profile of the working strips mills CTRR roller cold rolling pipe to ensure the required distribution of energy-power parameters along the cone. In presented paper, which has for aim the development of existing method for calculating the profile of calibrated working plank in the cold tube roller rolling mills, the analysis had been made and it was proposed to use Besier-lines while building the the profile of the plank working surface. It was established that the use of Besier spline-curve for calculating the calibration of supporting planks creates the possibility to calculate the parameters proceeding from reduction over the external diameter. The proposed method for calculating deformation parameters in CTRR mills is the result of development of existing method and as such shows the scientific novelty. Comparison of the plots for distribution of the force parameters of the CTRR process along the cone of deformation presents as evidence the advantage of the method to be proposed. The decrease of reduction value at the end of deformation zone favors the manufacture of tubes with lesser wall thickness deviation (especially longitudinal one, caused with waviness induced by the cold pilgering process. Joined the further development of the method of calculating the deformation parameters CTRR. It is proposed for the calculation of the calibration work surface support bracket mills CTRR to use a spline Bezier. The practical significance of the proposed method consists in the fact that calculation of all zones of the plank by means of one dependence allows simplifying the process of manufacturing the latter in machines with programmed numerical control. In this case the change of reduction parameters over the thickness of the wall will not exert the considerable influence on the character of the force parameters (the character and not the value distribution along the

Previous experience in manned space flight: A survey of human factors lessons learned

Science.gov (United States)

Chandlee, George O.; Woolford, Barbara

1993-01-01

Previous experience in manned space flight programs can be used to compile a data base of human factors lessons learned for the purpose of developing aids in the future design of inhabited spacecraft. The objectives are to gather information available from relevant sources, to develop a taxonomy of human factors data, and to produce a data base that can be used in the future for those people involved in the design of manned spacecraft operations. A study is currently underway at the Johnson Space Center with the objective of compiling, classifying, and summarizing relevant human factors data bearing on the lessons learned from previous manned space flights. The research reported defines sources of data, methods for collection, and proposes a classification for human factors data that may be a model for other human factors disciplines.

Person-related work and incident use of antidepressants: relations and mediating factors from the Danish work environment cohort study

DEFF Research Database (Denmark)

Madsen, Ida E H; Diderichsen, Finn; Burr, Hermann

2010-01-01

Previous Danish studies have shown that employees who "work with people" (i.e., do person-related work) are at increased risk of hospitalization with a diagnosis of depression. However, these studies were purely register-based and consequently unable to point to factors underlying this elevated...... risk. This paper examines whether person-related work is associated with incident use of antidepressants, and whether this association is mediated by several work environment exposures....

Working hot

International Nuclear Information System (INIS)

Stix, G.

1988-01-01

The author says ''barehand'' methods, where specially trained utility workers are called in conductive suits to equalize voltage over their bodies, to maintain high-voltage transmission lines are on the rise. Utilities are building lines at higher voltages and selling more power to other utilities, making it highly inconvenient to take the lines out of service. However, some unions view the barehand work with less than enthusiasm. Touching lines energized at hundreds of thousands of volts demands flawless equipment and rigid work procedures followed to the letter. Some local unions contend that adequate safety procedures and training, and appropriate penalties for workplace negligence, should be in place before utilities may do barehand work. The author discusses some of the methods of barehand work and the equipment used, i.e. steel-mesh lineman's suit, bucket truck's boom, helicopters, and robots

A Tooth Flank Crowning Method by Applying a Novel Crossed Angle Function Between the Hob Cutter and Work Gear in the Gear Hobbing Process

Directory of Open Access Journals (Sweden)

Wu Yu-Ren

2016-01-01

Full Text Available In this paper, a novel longitudinal tooth flank crowning method is proposed by setting the crossed angle between the hob cutter and work gear as a linear function of hob’s traverse feed movement in the gear hobbing process. However, this method makes twisted tooth flanks on the hobbed work gear. Therefore, a variable pressure angle hob cutter is applied to obtain an anti-twist tooth flank of hobbed work gear. A computer simulation example is performed to verify the superiority of the proposed novel hobbing method by comparing topographies of the crowned work gear surfaces hobbed by a standard hob cutter and a variable pressure angle hob cutter.

The Relationship of Lumbar Multifidus Muscle Morphology to Previous, Current, and Future Low Back Pain

DEFF Research Database (Denmark)

Hebert, Jeffrey J; Kjær, Per; Fritz, Julie M

2014-01-01

of LBP after five and nine years.Summary of Background Data. Although low back pain (LBP) is a major source of disease burden, the biologic determinants of LBP are poorly understood.Methods. Participants were 40-year-old adults randomly sampled from a Danish population and followed-up at ages 45 and 49....... At each time point, participants underwent magnetic resonance imaging and reported ever having had LBP, LBP in the previous year, non-trivial LBP in the previous year, or a history of pain radiating into the legs. Pixel intensity and frequencies from T1-weighted magnetic resonance images identified...

An efficient implicit direct forcing immersed boundary method for incompressible flows

International Nuclear Information System (INIS)

Cai, S-G; Ouahsine, A; Smaoui, H; Favier, J; Hoarau, Y

2015-01-01

A novel efficient implicit direct forcing immersed boundary method for incompressible flows with complex boundaries is presented. In the previous work [1], the calculation is performed on the Cartesian grid regardless of the immersed object, with a fictitious force evaluated on the Lagrangian points to mimic the presence of the physical boundaries. However the explicit direct forcing method [1] fails to accurately impose the non-slip boundary condition on the immersed interface. In the present work, the calculation is based on the implicit treatment of the artificial force while in an effective way of system iteration. The accuracy is also improved by solving the Navier-Stokes equation with the rotational incremental pressure- correction projection method of Guermond and Shen [2]. Numerical simulations performed with the proposed method are in good agreement with those in the literature

An axisymmetric method of creep analysis for primary and secondary creep

International Nuclear Information System (INIS)

Jahed, Hamid; Bidabadi, Jalal

2003-01-01

A general axisymmetric method for elastic-plastic analysis was previously proposed by Jahed and Dubey [ASME J Pressure Vessels Technol 119 (1997) 264]. In the present work the method is extended to the time domain. General rate type governing equations are derived and solved in terms of rate of change of displacement as a function of rate of change in loading. Different types of loading, such as internal and external pressure, centrifugal loading and temperature gradient, are considered. To derive specific equations and employ the proposed formulation, the problem of an inhomogeneous non-uniform rotating disc is worked out. Primary and secondary creep behaviour is predicted using the proposed method and results are compared to FEM results. The problem of creep in pressurized vessels is also solved. Several numerical examples show the effectiveness and robustness of the proposed method

Flexible Working Time Arrangements in Bulgaria

OpenAIRE

Beleva, Iskra

2009-01-01

The objective of this paper is to analyze the flexible working time arrangements in Bulgaria, using a life-course perspective. Two important features have to be outlined, namely: underdeveloped flexible forms of employment in the country, including working time arrangement, and lack of previous analysis on flexible working time arrangements from the angle of life-course perspective. The author describes the regulatory framework, collective agreements at national and company level as a frame w...

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

Science.gov (United States)

Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

2012-01-01

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

Alkylation induced cerebellar degeneration dependent on Aag and Parp1 does not occur via previously established cell death mechanisms.

Directory of Open Access Journals (Sweden)

Carrie M Margulies

Full Text Available Alkylating agents are ubiquitous in our internal and external environments, causing DNA damage that contributes to mutations and cell death that can result in aging, tissue degeneration and cancer. Repair of methylated DNA bases occurs primarily through the base excision repair (BER pathway, a multi-enzyme pathway initiated by the alkyladenine DNA glycosylase (Aag, also known as Mpg. Previous work demonstrated that mice treated with the alkylating agent methyl methanesulfonate (MMS undergo cerebellar degeneration in an Aag-dependent manner, whereby increased BER initiation by Aag causes increased tissue damage that is dependent on activation of poly (ADP-ribose polymerase 1 (Parp1. Here, we dissect the molecular mechanism of cerebellar granule neuron (CGN sensitivity to MMS using primary ex vivo neuronal cultures. We first established a high-throughput fluorescent imaging method to assess primary neuron sensitivity to treatment with DNA damaging agents. Next, we verified that the alkylation sensitivity of CGNs is an intrinsic phenotype that accurately recapitulates the in vivo dependency of alkylation-induced CGN cell death on Aag and Parp1 activity. Finally, we show that MMS-induced CGN toxicity is independent of all the cellular events that have previously been associated with Parp-mediated toxicity, including mitochondrial depolarization, AIF translocation, calcium fluxes, and NAD+ consumption. We therefore believe that further investigation is needed to adequately describe all varieties of Parp-mediated cell death.

Alkylation induced cerebellar degeneration dependent on Aag and Parp1 does not occur via previously established cell death mechanisms.

Science.gov (United States)

Margulies, Carrie M; Chaim, Isaac Alexander; Mazumder, Aprotim; Criscione, June; Samson, Leona D

2017-01-01

Alkylating agents are ubiquitous in our internal and external environments, causing DNA damage that contributes to mutations and cell death that can result in aging, tissue degeneration and cancer. Repair of methylated DNA bases occurs primarily through the base excision repair (BER) pathway, a multi-enzyme pathway initiated by the alkyladenine DNA glycosylase (Aag, also known as Mpg). Previous work demonstrated that mice treated with the alkylating agent methyl methanesulfonate (MMS) undergo cerebellar degeneration in an Aag-dependent manner, whereby increased BER initiation by Aag causes increased tissue damage that is dependent on activation of poly (ADP-ribose) polymerase 1 (Parp1). Here, we dissect the molecular mechanism of cerebellar granule neuron (CGN) sensitivity to MMS using primary ex vivo neuronal cultures. We first established a high-throughput fluorescent imaging method to assess primary neuron sensitivity to treatment with DNA damaging agents. Next, we verified that the alkylation sensitivity of CGNs is an intrinsic phenotype that accurately recapitulates the in vivo dependency of alkylation-induced CGN cell death on Aag and Parp1 activity. Finally, we show that MMS-induced CGN toxicity is independent of all the cellular events that have previously been associated with Parp-mediated toxicity, including mitochondrial depolarization, AIF translocation, calcium fluxes, and NAD+ consumption. We therefore believe that further investigation is needed to adequately describe all varieties of Parp-mediated cell death.

Automatic electromagnetic valve for previous vacuum

International Nuclear Information System (INIS)

Granados, C. E.; Martin, F.

1959-01-01

A valve which permits the maintenance of an installation vacuum when electric current fails is described. It also lets the air in the previous vacuum bomb to prevent the oil ascending in the vacuum tubes. (Author)

The Munik—Reteaming Method is a Way to Rehabilitate Psychosomatic and Work-Related Diseases and a Way to Create Healthy Psychosocial Workplaces

Directory of Open Access Journals (Sweden)

Pia von Vultée

2017-11-01

Full Text Available Background: Mental illness and stress are increasing at work. Sick leaves escalate. It is suggested to be due to organizational factors. There are a few methods to identify the organizational factors creating the negative psychosocial atmosphere at work. In Sweden, the work-related diseases have increased by 70% since 2010. Methods: Munik is a validated assessment instrument to identify psychosocial status among employees and find weak and strong organizational factors involved in the individual psychosocial well-being. We measure psychosocial well-being as mental energy, work-related exhaustion, and work satisfaction. Conclusions: In this study, we evaluate the treatment of employees at risk with low values on mental energy, high risk for developing work-related exhaustion, and reporting poor work satisfaction. Originality: We used Ben Furman’s positive solution-based coaching/therapy. This resulted in a more satisfied work group, and even though this group showed a large risk of developing work-related exhaustion in the start, none of the participants got on sick leave during the coaching/therapy period. After 3 months, 8 of 10 reported higher values on all 3 psychosocial levels measured.

The Impact of Sex Work on Women’s Personal Romantic Relationships and the Mental Separation of Their Work and Personal Lives: A Mixed-Methods Study

Science.gov (United States)

Bellhouse, Clare; Crebbin, Susan; Fairley, Christopher K.; Bilardi, Jade E.

2015-01-01

Background Very limited research has been undertaken on sex workers’ personal romantic relationships and the impact the nature of their work has on their relationships. This exploratory study aimed to explore the impact sex work has on women’s personal romantic relationships and the use of mental separation as a coping mechanism to balance the two aspects of their lives. Methods Fifty-five women working in the indoor sex industry in Melbourne, Australia, were recruited to complete a self-report questionnaire about various aspects of their work, including the impact of sex work on their personal relationships. Questionnaires were completed anonymously and included both closed and open-ended questions. A further six women were interviewed to ‘member check’ the accuracy of the questionnaire findings. Results Most women (78%) reported that, overall, sex work affected their personal romantic relationships in predominantly negative ways, mainly relating to issues stemming from lying, trust, guilt and jealousy. A small number of women reported positive impacts from sex work including improved sexual self-esteem and confidence. Just under half of women were in a relationship at the time of the study and, of these, 51% reported their partner was aware of the nature of their work. Seventy-seven percent of single women chose to remain single due to the nature of their work. Many women used mental separation as a coping mechanism to manage the tensions between sex work and their personal relationships. Member checking validated the accuracy of the questionnaire data. Conclusion This exploratory study identified a number of ways in which sex work impacts negatively on women’s personal romantic relationships. The findings of this study support the need for further studies to be undertaken to determine if the findings are reflected in a larger, more representative sample of Australian sex workers and should be considered in the context of any future intervention and

Two improved methods for testing ADC parametric faults by digital input signals

NARCIS (Netherlands)

Sheng, Xiaoqin; Kerkhoff, Hans G.

2009-01-01

In this paper, two improved methods are presented extending our previous work. The first one improves the results by adjusting the voltage levels of the input pulse wave stimulus. Compared with the sine wave input stimulus, the four-level pulse wave can detect even more faulty cases with the offset

A novel method of calibrating a MEMS inertial reference unit on a turntable under limited working conditions

Science.gov (United States)

Lu, Jiazhen; Liang, Shufang; Yang, Yanqiang

2017-10-01

Micro-electro-mechanical systems (MEMS) inertial measurement devices tend to be widely used in inertial navigation systems and have quickly emerged on the market due to their characteristics of low cost, high reliability and small size. Calibration is the most effective way to remove the deterministic error of an inertial reference unit (IRU), which in this paper consists of three orthogonally mounted MEMS gyros. However, common testing methods in the lab cannot predict the corresponding errors precisely when the turntable’s working condition is restricted. In this paper, the turntable can only provide a relatively small rotation angle. Moreover, the errors must be compensated exactly because of the great effect caused by the high angular velocity of the craft. To deal with this question, a new method is proposed to evaluate the MEMS IRU’s performance. In the calibration procedure, a one-axis table that can rotate a limited angle in the form of a sine function is utilized to provide the MEMS IRU’s angular velocity. A new algorithm based on Fourier series is designed to calculate the misalignment and scale factor errors. The proposed method is tested in a set of experiments, and the calibration results are compared to a traditional calibration method performed under normal working conditions to verify their correctness. In addition, a verification test in the given rotation speed is implemented for further demonstration.

CONSTRUCT VALIDITY AND SCORING METHODS OF THE WORLD HEALTH ORGANIZATION- HEALTH AND WORK PERFORMANCE QUESTIONNAIRE AMONG WORKERS WITH ARTHRITIS AND RHEUMATOLOGICAL CONDITIONS

Science.gov (United States)

AlHeresh, Rawan; LaValley, Michael P.; Coster, Wendy; Keysor, Julie J.

2017-01-01

Objective To evaluate construct validity and scoring methods of the world health organization- health and work performance questionnaire (HPQ) for people with arthritis. Methods Construct validity was examined through hypothesis testing using the recommended guidelines of the Consensus-based Standards for the selection of health Measurement Instruments (COSMIN). Results The HPQ using the absolute scoring method showed moderate construct validity as 4 of the 7 hypotheses were met. The HPQ using the relative scoring method had weak construct validity as only one of the 7 hypotheses were met. Conclusion The absolute scoring method for the HPQ is superior in construct validity to the relative scoring method in assessing work performance among people with arthritis and related rheumatic conditions; however, more research is needed to further explore other psychometric properties of the HPQ. PMID:28598938

METHODS TO QUANTIFY THE UNDERGROUND ECONOMY

Directory of Open Access Journals (Sweden)

Oana Simona HUDEA

2017-12-01

Full Text Available The underground economy issue has raised in time miscellaneous discussions, it representing a large interest problem that affects the nations all over the world, without exception and, thereby, the well—being of stand—alone individuals. Although also treated in some previous works of the author, this topic in herein approached from a different perspective, namely the one related to distinct methods to be used in order to capture, by quantification, this undesirable economic form. Such methods, empirically tested or just imposed, based on arguments, by the researchers having launched the same, are rendered while considering their pluses and minuses in revealing, with a reasonable accuracy, the level of the above—mentioned informal economy.

A method for measuring the electron drift velocity in working gas using a Frisch-grid ionization chamber

Energy Technology Data Exchange (ETDEWEB)

Bai, Huaiyong; Wang, Zhimin; Zhang, Luyu; Chen, Jinxiang; Zhang, Guohui, E-mail: guohuizhang@pku.edu.cn

2016-12-21

A method for measuring the electron drift velocity in working gas is proposed. Based on the cathode and the anode signal waveforms of the Frisch-grid ionization chamber, the electron drift velocity is extracted. With this method, the electron drift velocities in Ar + 10% CH{sub 4}, Ar + 3.5% CO{sub 2} and Kr + 2.7% CO{sub 2} gases have been measured and the results are compared with the existing measurements and the simulating results. Using this method, the electron drift velocity can be monitored throughout the experiment of charged particle without bothering the measurement of other parameters, such as the energy and orientation.

Though This be Madness: Heritage Methods for Working in Culturally Diverse Communities

Directory of Open Access Journals (Sweden)

John Petersen

2010-12-01

Full Text Available In 1998, the NSW Migration Heritage Centre was conceived by the NSW Government as a virtual heritage centre to help ageing former migrants tell their stories. Migration museums and other organisations interested in heritage are grappling with how to identify, record, preserve and interpret the heritage legacy of migration and settlement in their communities. The distinctions between museum and environmental heritage practices have diminished during the past decade in Australia. The Centre’s methodologies are based on historic method and thematic and typology studies, better known for their application to heritage place identification and archaeological artefact studies than for their more recent use by some Australian museum curators for the survey and documentation of collections and community participation in heritage. The ‘virtual museum’ has enabled the Centre to break away from the centralised museum concept, with the associated trappings of venue management, to pioneer a decentralised and dispersed museum model that works almost entirely in collaborative community history research partnerships to document culturally significant collections, and associated migration memories, held by communities and private individuals. The work is centralised on the Centre’s website as a virtual collection of objects, places and associated memories. They are presented in online exhibitions for student research and as a destination for the mass audiences of the worldwide web.

Prevalence of pain in the head, back and feet in refugees previously exposed to torture: a ten-year follow-up study

DEFF Research Database (Denmark)

Olsen, Dorthe Reff; Montgomery, Edith; Bøjholm, Søren

2007-01-01

AIM: To estimate change over 10 years concerning the prevalence of pain in the head, back and feet, among previously tortured refugees settled in Denmark, and to compare associations between methods of torture and prevalent pain at baseline and at 10-year follow-up. METHODS: 139 refugees previous...... associated with the type and bodily focus of the torture. This presents a considerable challenge to future evidence-based development of effective treatment programs....

Development of a tracking method for augmented reality applied to NPP maintenance work and its experimental evaluation

International Nuclear Information System (INIS)

Bian, Zhiqiang; Ishii, Hirotake; Shimoda, Hiroshi; Yoshikawa, Hidekazu; Morishita, Yoshitsugu; Kanehira, Yoshiki; Izumi, Masanori

2007-01-01

Nuclear power plants (NPPs) must be maintained periodically. Their maintenance efficiency must be improved and human error must be reduced simultaneously to improve NPPs' competitive capability in electricity markets. Although Augmented Reality (AR) offers great possibilities to support NPP maintenance work, some difficulties exist for application of AR to actual work support because current AR systems cannot be implemented in NPP environments without technical improvement. There are several kinds of problems such as recognition distance, tracking accuracy, and a complex working environment when applying AR to NPP field work support. Considerable extension of tracking distance and improvement of accuracy are particularly desired because NPPs are large scale indoor environments. This study designed a linecode marker, a new type of paper-based marker, along with recognition and tracking algorithms for it to resolve these problems. In contrast to conventional paper-based makers, such as square markers and circle markers, the linecode marker is not merely easier to set up in complex industrial environments: it also enables the use of AR in industrial plants because of its considerable tracking-performance improvement. To evaluate tracking accuracy, the trackable distance, and the tracking speed of the proposed tracking method, an evaluation experiment was conducted in a large room. The experiment results show that the tracking distance is extended extremely over that of the traditional marker-based tracking method: tracking accuracy improved to 20 cm over a 10 m distance. The running speed of the tracking can be as fast as 15 frames per second using a laptop PC. (author)

Enhancing the (MSLDIP) image steganographic method (ESLDIP method)

Science.gov (United States)

Seddik Saad, Al-hussien

2011-10-01

Message transmissions over the Internet still have data security problem. Therefore, secure and secret communication methods are needed for transmitting messages over the Internet. Cryptography scrambles the message so that it cannot be understood. However, it makes the message suspicious enough to attract eavesdropper's attention. Steganography hides the secret message within other innocuous-looking cover files (i.e. images, music and video files) so that it cannot be observed [1].The term steganography originates from the Greek root words "steganos'' and "graphein'' which literally mean "covered writing''. It is defined as the science that involves communicating secret data in an appropriate multimedia carrier, e.g., image, audio text and video files [3].Steganographic techniques allow one party to communicate information to another without a third party even knowing that the communication is occurring. The ways to deliver these "secret messages" vary greatly [3].Our proposed method called Enhanced SLDIP (ESLDIP). In which the maximmum hiding capacity (MHC) of proposed ESLDIP method is higher than the previously proposed MSLDIP methods and the PSNR of the ESLDIP method is higher than the MSLDIP PSNR values', which means that the image quality of the ESLDIP method will be better than MSLDIP method and the maximmum hiding capacity (MHC) also improved. The rest of this paper is organized as follows. In section 2, steganography has been discussed; lingo, carriers and types. In section 3, related works are introduced. In section 4, the proposed method will be discussed in details. In section 5, the simulation results are given and Section 6 concludes the paper.

Maternal Employment, Work Schedules, and Children's Body Mass Index

Science.gov (United States)

Morrissey, Taryn W.; Dunifon, Rachel E.; Kalil, Ariel

2011-01-01

Previous work has shown that mothers' employment is associated with increases in children's body mass index (BMI), a measure of weight for height. Nonstandard work (working evenings or nights, weekends, or an irregular shift) may also be associated with children's BMI. This article examines the association between maternal work and children's BMI…

Validation of the Online version of the Previous Day Food Questionnaire for schoolchildren

Directory of Open Access Journals (Sweden)

Raquel ENGEL

Full Text Available ABSTRACT Objective To evaluate the validity of the web-based version of the Previous Day Food Questionnaire Online for schoolchildren from the 2nd to 5th grades of elementary school. Methods Participants were 312 schoolchildren aged 7 to 12 years of a public school from the city of Florianópolis, Santa Catarina, Brazil. Validity was assessed by sensitivity, specificity, as well as by agreement rates (match, omission, and intrusion rates of food items reported by children on the Previous Day Food Questionnaire Online, using direct observation of foods/beverages eaten during school meals (mid-morning snack or afternoon snack on the previous day as the reference. Multivariate multinomial logistic regression analysis was used to evaluate the influence of participants’ characteristics on omission and intrusion rates. Results The results showed adequate sensitivity (67.7% and specificity (95.2%. There were low omission and intrusion rates of 22.8% and 29.5%, respectively when all food items were analyzed. Pizza/hamburger showed the highest omission rate, whereas milk and milk products showed the highest intrusion rate. The participants who attended school in the afternoon shift presented a higher probability of intrusion compared to their peers who attended school in the morning. Conclusion The Previous Day Food Questionnaire Online possessed satisfactory validity for the assessment of food intake at the group level in schoolchildren from the 2nd to 5th grades of public school.

HEART TRANSPLANTATION IN PATIENTS WITH PREVIOUS OPEN HEART SURGERY

Directory of Open Access Journals (Sweden)

R. Sh. Saitgareev

2016-01-01

Full Text Available Heart Transplantation (HTx to date remains the most effective and radical method of treatment of patients with end-stage heart failure. The defi cit of donor hearts is forcing to resort increasingly to the use of different longterm mechanical circulatory support systems, including as a «bridge» to the follow-up HTx. According to the ISHLT Registry the number of recipients underwent cardiopulmonary bypass surgery increased from 40% in the period from 2004 to 2008 to 49.6% for the period from 2009 to 2015. HTx performed in repeated patients, on the one hand, involves considerable technical diffi culties and high risks; on the other hand, there is often no alternative medical intervention to HTx, and if not dictated by absolute contradictions the denial of the surgery is equivalent to 100% mortality. This review summarizes the results of a number of published studies aimed at understanding the immediate and late results of HTx in patients, previously underwent open heart surgery. The effect of resternotomy during HTx and that of the specifi c features associated with its implementation in recipients previously operated on open heart, and its effects on the immediate and long-term survival were considered in this review. Results of studies analyzing the risk factors for perioperative complications in repeated recipients were also demonstrated. Separately, HTx risks after implantation of prolonged mechanical circulatory support systems were examined. The literature does not allow to clearly defi ning the impact factor of earlier performed open heart surgery on the course of perioperative period and on the prognosis of survival in recipients who underwent HTx. On the other hand, subject to the regular fl ow of HTx and the perioperative period the risks in this clinical situation are justifi ed as a long-term prognosis of recipients previously conducted open heart surgery and are comparable to those of patients who underwent primary HTx. Studies

Music Training and Working Memory: An ERP Study

Science.gov (United States)

George, Elyse M.; Coch, Donna

2011-01-01

While previous research has suggested that music training is associated with improvements in various cognitive and linguistic skills, the mechanisms mediating or underlying these associations are mostly unknown. Here, we addressed the hypothesis that previous music training is related to improved working memory. Using event-related potentials…

Flexible Working and Couples' Coordination of Time Schedules

OpenAIRE

Bryan, Mark L.; Sevilla Sanz, Almudena

2014-01-01

Using previously unexploited data on time scheduling in the employment and household contexts, we investigate the effect of flexible working on couples' coordination of their daily work time schedules in the UK. We consider three distinct dimensions of flexible working: flexibility of daily start and finish times (flexitime), flexibility of work times over the year (annualised hours), and generalised control of working hours. We find that in couples with flexitime there is greater spouse sync...

Questionnaire survey of working relationships between nurses and doctors in University Teaching Hospitals in Southern Nigeria

Directory of Open Access Journals (Sweden)

Adebamowo Clement A

2006-02-01

Full Text Available Abstract Background Smooth working relationships between nurses and doctors are necessary for efficient health care delivery. However, previous studies have shown that this is often absent with negative impact on the quality of health care delivery. In 2002, we studied factors that affect nurse-doctor working relationships in University Teaching Hospitals (UTH in Southern Nigeria in order to characterize it and identify managerial and training needs that might be used to improve it. Method Questionnaire survey of doctors and nurses working in four UTH in Southern Nigeria was done in 2002. The setting and subjects were selected by random sampling procedures. Information on factors in domains of work, union activities, personnel and hospital management were studied using closed and open-ended questionnaires. Results Nurse-doctor working relationships were statistically significantly affected by poor after-work social interaction, staff shortages, activist unionism, disregard for one's profession, and hospital management and government policies. In general, nurses had better opinion of doctors' work than doctors had about nurses' work. Conclusion Working relationships between doctors and nurses need to be improved through improved training and better working conditions, creation of better working environment, use of alternative methods of conflict resolution and balanced hospital management and government policies. This will improve the retention of staff, job satisfaction and efficiency of health care delivery in Nigeria.

Principle of minimal work fluctuations.

Science.gov (United States)

Xiao, Gaoyang; Gong, Jiangbin

2015-08-01

Understanding and manipulating work fluctuations in microscale and nanoscale systems are of both fundamental and practical interest. For example, in considering the Jarzynski equality 〈e-βW〉=e-βΔF, a change in the fluctuations of e-βW may impact how rapidly the statistical average of e-βW converges towards the theoretical value e-βΔF, where W is the work, β is the inverse temperature, and ΔF is the free energy difference between two equilibrium states. Motivated by our previous study aiming at the suppression of work fluctuations, here we obtain a principle of minimal work fluctuations. In brief, adiabatic processes as treated in quantum and classical adiabatic theorems yield the minimal fluctuations in e-βW. In the quantum domain, if a system initially prepared at thermal equilibrium is subjected to a work protocol but isolated from a bath during the time evolution, then a quantum adiabatic process without energy level crossing (or an assisted adiabatic process reaching the same final states as in a conventional adiabatic process) yields the minimal fluctuations in e-βW, where W is the quantum work defined by two energy measurements at the beginning and at the end of the process. In the classical domain where the classical work protocol is realizable by an adiabatic process, then the classical adiabatic process also yields the minimal fluctuations in e-βW. Numerical experiments based on a Landau-Zener process confirm our theory in the quantum domain, and our theory in the classical domain explains our previous numerical findings regarding the suppression of classical work fluctuations [G. Y. Xiao and J. B. Gong, Phys. Rev. E 90, 052132 (2014)].

Underestimation of Severity of Previous Whiplash Injuries

Science.gov (United States)

Naqui, SZH; Lovell, SJ; Lovell, ME

2008-01-01

INTRODUCTION We noted a report that more significant symptoms may be expressed after second whiplash injuries by a suggested cumulative effect, including degeneration. We wondered if patients were underestimating the severity of their earlier injury. PATIENTS AND METHODS We studied recent medicolegal reports, to assess subjects with a second whiplash injury. They had been asked whether their earlier injury was worse, the same or lesser in severity. RESULTS From the study cohort, 101 patients (87%) felt that they had fully recovered from their first injury and 15 (13%) had not. Seventy-six subjects considered their first injury of lesser severity, 24 worse and 16 the same. Of the 24 that felt the violence of their first accident was worse, only 8 had worse symptoms, and 16 felt their symptoms were mainly the same or less than their symptoms from their second injury. Statistical analysis of the data revealed that the proportion of those claiming a difference who said the previous injury was lesser was 76% (95% CI 66–84%). The observed proportion with a lesser injury was considerably higher than the 50% anticipated. CONCLUSIONS We feel that subjects may underestimate the severity of an earlier injury and associated symptoms. Reasons for this may include secondary gain rather than any proposed cumulative effect. PMID:18201501

Secondary recurrent miscarriage is associated with previous male birth.

LENUS (Irish Health Repository)

Ooi, Poh Veh

2012-01-31

Secondary recurrent miscarriage (RM) is defined as three or more consecutive pregnancy losses after delivery of a viable infant. Previous reports suggest that a firstborn male child is associated with less favourable subsequent reproductive potential, possibly due to maternal immunisation against male-specific minor histocompatibility antigens. In a retrospective cohort study of 85 cases of secondary RM we aimed to determine if secondary RM was associated with (i) gender of previous child, maternal age, or duration of miscarriage history, and (ii) increased risk of pregnancy complications. Fifty-three women (62.0%; 53\\/85) gave birth to a male child prior to RM compared to 32 (38.0%; 32\\/85) who gave birth to a female child (p=0.002). The majority (91.7%; 78\\/85) had uncomplicated, term deliveries and normal birth weight neonates, with one quarter of the women previously delivered by Caesarean section. All had routine RM investigations and 19.0% (16\\/85) had an abnormal result. Fifty-seven women conceived again and 33.3% (19\\/57) miscarried, but there was no significant difference in failure rates between those with a previous male or female child (13\\/32 vs. 6\\/25, p=0.2). When patients with abnormal results were excluded, or when women with only one previous child were considered, there was still no difference in these rates. A previous male birth may be associated with an increased risk of secondary RM but numbers preclude concluding whether this increases recurrence risk. The suggested association with previous male birth provides a basis for further investigations at a molecular level.

Secondary recurrent miscarriage is associated with previous male birth.

LENUS (Irish Health Repository)

Ooi, Poh Veh

2011-01-01

Secondary recurrent miscarriage (RM) is defined as three or more consecutive pregnancy losses after delivery of a viable infant. Previous reports suggest that a firstborn male child is associated with less favourable subsequent reproductive potential, possibly due to maternal immunisation against male-specific minor histocompatibility antigens. In a retrospective cohort study of 85 cases of secondary RM we aimed to determine if secondary RM was associated with (i) gender of previous child, maternal age, or duration of miscarriage history, and (ii) increased risk of pregnancy complications. Fifty-three women (62.0%; 53\\/85) gave birth to a male child prior to RM compared to 32 (38.0%; 32\\/85) who gave birth to a female child (p=0.002). The majority (91.7%; 78\\/85) had uncomplicated, term deliveries and normal birth weight neonates, with one quarter of the women previously delivered by Caesarean section. All had routine RM investigations and 19.0% (16\\/85) had an abnormal result. Fifty-seven women conceived again and 33.3% (19\\/57) miscarried, but there was no significant difference in failure rates between those with a previous male or female child (13\\/32 vs. 6\\/25, p=0.2). When patients with abnormal results were excluded, or when women with only one previous child were considered, there was still no difference in these rates. A previous male birth may be associated with an increased risk of secondary RM but numbers preclude concluding whether this increases recurrence risk. The suggested association with previous male birth provides a basis for further investigations at a molecular level.

Work right to right work: An automythology of chronic illness and work.

Science.gov (United States)

Vijayasingham, Lavanya

2018-03-01

Objectives Chronic illness is known to disrupt and redirect the usual course of work trajectories. This article aims to portray the longitudinal course of negotiating work after multiple sclerosis. Methods Using therapy and personal journals to reconstruct memories and experience, an autoethnography is produced and narrated within Campbell's "Hero's Journey" automythology framework. Results The narrative highlights the intrasubjectivity of illness meaning-the changing internal meaning-making and external behavior and decision-making dynamics. The journey of being inhibited to "Work Right", to "Looking for the Right" and ultimately, finding "Right Work" is charted; portrayed as a bittersweet maneuver to achieve work-illness equilibrium. Discussion This journey traverses a spectrum of negative coping-the exhibition of deviant work behaviors, disengagement and depression; to recalibration and renewal; culminating in living the "new normal", and finding moral and meaningful work engagements. Life trajectories with chronic illness are often skewed and redirected; but longitudinal narratives of normalization and coping also highlight the pursuits to secure and maintain a life of meaning and value.

Construct Validity and Scoring Methods of the World Health Organization: Health and Work Performance Questionnaire Among Workers With Arthritis and Rheumatological Conditions.

Science.gov (United States)

AlHeresh, Rawan; LaValley, Michael P; Coster, Wendy; Keysor, Julie J

2017-06-01

To evaluate construct validity and scoring methods of the world health organization-health and work performance questionnaire (HPQ) for people with arthritis. Construct validity was examined through hypothesis testing using the recommended guidelines of the consensus-based standards for the selection of health measurement instruments (COSMIN). The HPQ using the absolute scoring method showed moderate construct validity as four of the seven hypotheses were met. The HPQ using the relative scoring method had weak construct validity as only one of the seven hypotheses were met. The absolute scoring method for the HPQ is superior in construct validity to the relative scoring method in assessing work performance among people with arthritis and related rheumatic conditions; however, more research is needed to further explore other psychometric properties of the HPQ.

Examining the "Neglected Side of the Work-Family Interface": Antecedents of Positive and Negative Family-to-Work Spillover

Science.gov (United States)

Stevens, Daphne Pedersen; Minnotte, Krista Lynn; Mannon, Susan E.; Kiger, Gary

2007-01-01

This study extends previous research by Dilworth by examining antecedents of both positive and negative family-to-work spillover--a long-neglected area of research. It also uses an extended definition of domestic labor that includes emotion work and status enhancement. Using data from a random sample of dual-earner couples, the study found gender…

The frequency of previously undetectable deletions involving 3' Exons of the PMS2 gene.

Science.gov (United States)

Vaughn, Cecily P; Baker, Christine L; Samowitz, Wade S; Swensen, Jeffrey J

2013-01-01

Lynch syndrome is characterized by mutations in one of four mismatch repair genes, MLH1, MSH2, MSH6, or PMS2. Clinical mutation analysis of these genes includes sequencing of exonic regions and deletion/duplication analysis. However, detection of deletions and duplications in PMS2 has previously been confined to Exons 1-11 due to gene conversion between PMS2 and the pseudogene PMS2CL in the remaining 3' exons (Exons 12-15). We have recently described an MLPA-based method that permits detection of deletions of PMS2 Exons 12-15; however, the frequency of such deletions has not yet been determined. To address this question, we tested for 3' deletions in 58 samples that were reported to be negative for PMS2 mutations using previously available methods. All samples were from individuals whose tumors exhibited loss of PMS2 immunohistochemical staining without concomitant loss of MLH1 immunostaining. We identified seven samples in this cohort with deletions in the 3' region of PMS2, including three previously reported samples with deletions of Exons 13-15 (two samples) and Exons 14-15. Also detected were deletions of Exons 12-15, Exon 13, and Exon 14 (two samples). Breakpoint analysis of the intragenic deletions suggests they occurred through Alu-mediated recombination. Our results indicate that ∼12% of samples suspected of harboring a PMS2 mutation based on immunohistochemical staining, for which mutations have not yet been identified, would benefit from testing using the new methodology. Copyright © 2012 Wiley Periodicals, Inc.

An L-stable method for solving stiff hydrodynamics

Science.gov (United States)

Li, Shengtai

2017-07-01

We develop a new method for simulating the coupled dynamics of gas and multi-species dust grains. The dust grains are treated as pressure-less fluids and their coupling with gas is through stiff drag terms. If an explicit method is used, the numerical time step is subject to the stopping time of the dust particles, which can become extremely small for small grains. The previous semi-implicit method [1] uses second-order trapezoidal rule (TR) on the stiff drag terms and it works only for moderately small size of the dust particles. This is because TR method is only A-stable not L-stable. In this work, we use TR-BDF2 method [2] for the stiff terms in the coupled hydrodynamic equations. The L-stability of TR-BDF2 proves essential in treating a number of dust species. The combination of TR-BDF2 method with the explicit discretization of other hydro terms can solve a wide variety of stiff hydrodynamics equations accurately and efficiently. We have implemented our method in our LA-COMPASS (Los Alamos Computational Astrophysics Suite) package. We have applied the code to simulate some dusty proto-planetary disks and obtained very good match with astronomical observations.

Is email a reliable means of contacting authors of previously published papers? A study of the Emergency Medicine Journal for 2001.

Science.gov (United States)

O'Leary, F

2003-07-01

To determine whether it is possible to contact authors of previously published papers via email. A cross sectional study of the Emergency Medicine Journal for 2001. 118 articles were included in the study. The response rate from those with valid email addresses was 73%. There was no statistical difference between the type of email address used and the address being invalid (p=0.392) or between the type of article and the likelihood of a reply (p=0.197). More responses were obtained from work addresses when compared with Hotmail addresses (86% v 57%, p=0.02). Email is a valid means of contacting authors of previously published articles, particularly within the emergency medicine specialty. A work based email address may be a more valid means of contact than a Hotmail address.

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, C.A.M.; van Rhenen, W.; Groothoff, J.W.; van der Klink, J.J.L.; Twisk, J.W.R.; Heymans, M.W.

2014-01-01

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Work ability as prognostic risk marker of disability pension : single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, Corne A. M.; van Rhenen, Willem; Groothoff, Johan W.; van der Klink, Jac J. L.; Twisk, Jos W. R.; Heymans, Martijn W.

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Physical demands at work, physical fitness, and 30-year ischaemic heart disease and all-cause mortality in the Copenhagen male study

DEFF Research Database (Denmark)

Holtermann, Andreas; Mortensen, Ole Steen; Burr, Hermann

2010-01-01

Objective: No previous long-term prospective studies have examined if workers with low cardiorespiratory fitness have an increased risk of cardiovascular mortality due to high physical work demands. We tested this hypothesis. Method: We carried out a 30-year follow-up of the Copenhagen Male Study...

Investigating Burnout and Psychological Well-Being of Staff Working with People with Intellectual Disabilities and Challenging Behaviour: The Role of Personality

Science.gov (United States)

Chung, Man Cheung; Harding, Carly

2009-01-01

Background: The present research extended previous research by broadening the dimensions of personality traits, and focusing on burnout and psychological well-being among staff working with people with intellectual disabilities and challenging behaviour. Methods: This is a cross-sectional survey in which 103 staff completed questionnaires…

Cultivation-based multiplex phenotyping of human gut microbiota allows targeted recovery of previously uncultured bacteria

DEFF Research Database (Denmark)

Rettedal, Elizabeth; Gumpert, Heidi; Sommer, Morten

2014-01-01

The human gut microbiota is linked to a variety of human health issues and implicated in antibiotic resistance gene dissemination. Most of these associations rely on culture-independent methods, since it is commonly believed that gut microbiota cannot be easily or sufficiently cultured. Here, we...... microbiota. Based on the phenotypic mapping, we tailor antibiotic combinations to specifically select for previously uncultivated bacteria. Utilizing this method we cultivate and sequence the genomes of four isolates, one of which apparently belongs to the genus Oscillibacter; uncultivated Oscillibacter...

Work Capacity of the Bladder During Voiding: A Novel Method to Evaluate Bladder Contractile Function and Bladder Outlet Obstruction

Directory of Open Access Journals (Sweden)

Ning Liu

2015-01-01

Full Text Available Background: Work in voiding (WIV of the bladder may be used to evaluate bladder status throughout urination rather than at a single time point. Few studies, however, have assessed WIV owing to the complexity of its calculations. We have developed a method of calculating work capacity of the bladder while voiding and analyzed the associations of bladder work parameters with bladder contractile function and bladder outlet obstruction (BOO. Methods: The study retrospectively evaluated 160 men and 23 women, aged >40 years and with a detrusor pressure at maximal flow rate (P det Q max of ≥40 cmH 2 O in men, who underwent urodynamic testing. The bladder power integration method was used to calculate WIV; WIV per second (WIV/t and WIV per liter of urine voided (WIV/v were also calculated. In men, the relationships between these work capacity parameters and P det Q max and Abrams-Griffiths (AG number were determined using linear-by-linear association tests, and relationships between work capacity parameters and BOO grade were investigated using Spearman′s association test. Results: The mean WIV was 1.15 ± 0.78 J and 1.30 ± 0.88 J, mean WIV/t was 22.95 ± 14.45 mW and 23.78 ± 17.02 mW, and mean WIV/v was 5.59 ± 2.32 J/L and 2.83 ± 1.87 J/L in men and women, respectively. In men, WIV/v showed significant positive associations with P det Q max (r = 0.845, P = 0.000, AG number (r = 0.814, P = 0.000, and Schafer class (r = 0.726, P = 0.000. Conversely, WIV and WIV/t showed no associations with P det Q max or AG number. In patients with BOO (Schafer class > II, WIV/v correlated positively with increasing BOO grade. Conclusions: WIV can be calculated from simple urodynamic parameters using the bladder power integration method. WIV/v may be a marker of BOO grade, and the bladder contractile function can be evaluated by WIV and WIV/t.

Exploring Scientists' Working Timetable: A Global Survey

OpenAIRE

Wang, Xianwen; Peng, Lian; Zhang, Chunbo; Xu, Shenmeng; Wang, Zhi; Wang, Chuanli; Wang, Xianbing

2013-01-01

In our previous study (Wang et al., 2012), we analyzed scientists' working timetable of 3 countries, using realtime downloading data of scientific literatures. In this paper, we make a through analysis about global scientists' working habits. Top 30 countries/territories from Europe, Asia, Australia, North America, Latin America and Africa are selected as representatives and analyzed in detail. Regional differences for scientists' working habits exists in different countries. Besides differen...

Nonequilibrium quantum fluctuations of work.

Science.gov (United States)

Allahverdyan, A E

2014-09-01

The concept of work is basic for statistical thermodynamics. To gain a fuller understanding of work and its (quantum) features, it needs to be represented as an average of a fluctuating quantity. Here I focus on the work done between two moments of time for a thermally isolated quantum system driven by a time-dependent Hamiltonian. I formulate two natural conditions needed for the fluctuating work to be physically meaningful for a system that starts its evolution from a nonequilibrium state. The existing definitions do not satisfy these conditions due to issues that are traced back to noncommutativity. I propose a definition of fluctuating work that is free of previous drawbacks and that applies for a wide class of nonequilibrium initial states. It allows the deduction of a generalized work-fluctuation theorem that applies for an arbitrary (out-of-equilibrium) initial state.

Estimating the effect of current, previous and never use of drugs in studies based on prescription registries

DEFF Research Database (Denmark)

Nielsen, Lars Hougaard; Løkkegaard, Ellen; Andreasen, Anne Helms

2009-01-01

of this misclassification for analysing the risk of breast cancer. MATERIALS AND METHODS: Prescription data were obtained from Danish Registry of Medicinal Products Statistics and we applied various methods to approximate treatment episodes. We analysed the duration of HT episodes to study the ability to identify......PURPOSE: Many studies which investigate the effect of drugs categorize the exposure variable into never, current, and previous use of the study drug. When prescription registries are used to make this categorization, the exposure variable possibly gets misclassified since the registries do...... not carry any information on the time of discontinuation of treatment.In this study, we investigated the amount of misclassification of exposure (never, current, previous use) to hormone therapy (HT) when the exposure variable was based on prescription data. Furthermore, we evaluated the significance...

Reoperative sentinel lymph node biopsy after previous mastectomy.

Science.gov (United States)

Karam, Amer; Stempel, Michelle; Cody, Hiram S; Port, Elisa R

2008-10-01

Sentinel lymph node (SLN) biopsy is the standard of care for axillary staging in breast cancer, but many clinical scenarios questioning the validity of SLN biopsy remain. Here we describe our experience with reoperative-SLN (re-SLN) biopsy after previous mastectomy. Review of the SLN database from September 1996 to December 2007 yielded 20 procedures done in the setting of previous mastectomy. SLN biopsy was performed using radioisotope with or without blue dye injection superior to the mastectomy incision, in the skin flap in all patients. In 17 of 20 patients (85%), re-SLN biopsy was performed for local or regional recurrence after mastectomy. Re-SLN biopsy was successful in 13 of 20 patients (65%) after previous mastectomy. Of the 13 patients, 2 had positive re-SLN, and completion axillary dissection was performed, with 1 having additional positive nodes. In the 11 patients with negative re-SLN, 2 patients underwent completion axillary dissection demonstrating additional negative nodes. One patient with a negative re-SLN experienced chest wall recurrence combined with axillary recurrence 11 months after re-SLN biopsy. All others remained free of local or axillary recurrence. Re-SLN biopsy was unsuccessful in 7 of 20 patients (35%). In three of seven patients, axillary dissection was performed, yielding positive nodes in two of the three. The remaining four of seven patients all had previous modified radical mastectomy, so underwent no additional axillary surgery. In this small series, re-SLN was successful after previous mastectomy, and this procedure may play some role when axillary staging is warranted after mastectomy.

Long working hours and sickness absence-a fixed effects design.

Science.gov (United States)

Bernstrøm, Vilde Hoff

2018-05-02

While long working hours seem to lead to impaired health, several studies have also shown that long working hours are related to lower levels of sickness absence. Previous studies on the relationship between long working hours and sickness absence have compared those who work long hours to those who do not, looking only at between-individual correlations. Those results might therefore reflect relatively stable differences between employees who typically work long hours and employees who typically do not. The aim of the present study is to examine within-individual correlations between long working hours and sickness absence. Records from the Human Resources department in a large Norwegian hospital from 2012 to 2015 provided objective data on both working hours and sickness absence. Two analyses were performed: a prospective cohort analysis to replicate the results from previous between-individual analyses and a second analysis of within-individual correlations using a fixed effect design. In line with existing research, both between-individual and within-individual analyses showed a negative relationship between long working hours (> 48 h/week) and short-term sickness absence (1-8 days) and no significant difference in incidence of long-term sickness absence (> 8 days). The results indicate that the negative relationship between long working hours and sickness absence is not due only to relatively stable individual differences between those who typically work long hours and those who do not. The results from both analyses therefore still contrast with previous research showing a negative relationship between long working hours and other health indicators.

77 FR 70176 - Previous Participation Certification

Science.gov (United States)

2012-11-23

... participants' previous participation in government programs and ensure that the past record is acceptable prior... information is designed to be 100 percent automated and digital submission of all data and certifications is... government programs and ensure that the past record is acceptable prior to granting approval to participate...

Work values and career anchors: the perspective of students of higher education in classroom methods and distance

Directory of Open Access Journals (Sweden)

Tais de Andrade

2018-01-01

Full Text Available This study takes into account the factors that interfere with career decisions from the internal demands of individuals, represented by the work values. Investigated university students’ perspective on work values and career anchors. For this, we used a survey along the 958 undergraduate students of face and distance higher education institutions in the interior of Rio Grande do Sul. The data collection instrument was developed from the Work Values Scale Revised developed by Porto and Pilati (2010 and the Inventory of Career Anchors proposed by Schein (1993; 1996. As for the results, there were significant differences between the perceptions of the two methods of teaching, but the hierarchy assigned to the values and anchors in both was similar, which shows certain pattern of agreement as to the perception of importance attached to each dimension studied.

Measuring Load on Working Memory: The Use of Heart Rate as a Means of Measuring Chemistry Students' Cognitive Load

Science.gov (United States)

Cranford, Kristen N.; Tiettmeyer, Jessica M.; Chuprinko, Bryan C.; Jordan, Sophia; Grove, Nathaniel P.

2014-01-01

Information processing provides a powerful model for understanding how learning occurs and highlights the important role that cognitive load plays in this process. In instances in which the cognitive load of a problem exceeds the available working memory, learning can be seriously hindered. Previously reported methods for measuring cognitive load…

Risks of cardiovascular adverse events and death in patients with previous stroke undergoing emergency noncardiac, nonintracranial surgery

DEFF Research Database (Denmark)

Christiansen, Mia N.; Andersson, Charlotte; Gislason, Gunnar H.

2017-01-01

Background: The outcomes of emergent noncardiac, nonintracranial surgery in patients with previous stroke remain unknown. Methods: All emergency surgeries performed in Denmark (2005 to 2011) were analyzed according to time elapsed between previous ischemic stroke and surgery. The risks of 30-day...... mortality and major adverse cardiovascular events were estimated as odds ratios (ORs) and 95% CIs using adjusted logistic regression models in a priori defined groups (reference was no previous stroke). In patients undergoing surgery immediately (within 1 to 3 days) or early after stroke (within 4 to 14...... and general anesthesia less frequent in patients with previous stroke (all P Risks of major adverse cardiovascular events and mortality were high for patients with stroke less than 3 months (20.7 and 16.4% events; OR = 4.71 [95% CI, 4.18 to 5.32] and 1.65 [95% CI, 1.45 to 1.88]), and remained...

Personnel's health surveillance at work: effect of age, body mass index, and shift work on mental workload and work ability index.

Science.gov (United States)

Safari, Shahram; Akbari, Jafar; Kazemi, Meghdad; Mououdi, Mohammad Amin; Mahaki, Behzad

2013-01-01

Two great changes in developed countries are taking place: populations are ageing and becoming increasingly overweight. Combination of these factors with shift work is a risk factor for work ability and mental workload that are dynamic processes which change greatly throughout an individual's work life. The aim of this study was to investigate mental workload and work ability in textile workers and to identify factors which affect work ability and mental workload. This cross-sectional study was carried out among 194 male workers in textile industry. Employees based on their job group and work conditions have been divided into 6 categories. They completed work ability index and mental workload questionnaires during three work shifts. Body mass index (BMI) and demographic details were recorded. All of the participants rated their work ability as moderate with high mental workload. The mean WAI and mental workload in age group were significant. The mean BMI was 25.5 kg/m(2) (standard deviation 4.1) and the mean age was 40.22 years. There was a statistically significant correlation between work ability index and shift work. Unlike the previous study, a decrease point in WAI started in early age that may be due to life-style work and another psychological factor; on the other hand, NASA-TLX revealed high score in six subscales that can be another reason for low WAI.

Management of Teacher Scientific-Methodical Work in Vocational Educational Institutions on the Basis of Project-Target Approach

Science.gov (United States)

Shakuto, Elena A.; Dorozhkin, Evgenij M.; Kozlova, Anastasia A.

2016-01-01

The relevance of the subject under analysis is determined by the lack of theoretical development of the problem of management of teacher scientific-methodical work in vocational educational institutions based upon innovative approaches in the framework of project paradigm. The purpose of the article is to develop and test a science-based…

Contribution of Psychological, Social, and Mechanical Work Exposures to Low Work Ability

OpenAIRE

Emberland, Jan S.; Knardahl, Stein

2015-01-01

Objective: To determine the contribution of specific psychological, social, and mechanical work exposures to the self-reported low level of work ability. Methods: Employees from 48 organizations were surveyed over a 2-year period (n = 3779). Changes in 16 work exposures and 3 work ability measures?the work ability index score, perceived current, and future work ability?were tested with Spearman rank correlations. Binary logistic regressions were run to determine contribution of work exposures...

A PRACTICAL APPROACH TO THE GROUND OSCILLATION VELOCITY MEASUREMENT METHOD

Directory of Open Access Journals (Sweden)

Siniša Stanković

2017-01-01

Full Text Available The use of an explosive’s energy during blasting includes undesired effects on the environment. The seismic influence of a blast, as a major undesired effect, is determined by many national standards, recommendations and calculations where the main parameter is ground oscillation velocity at the field measurement location. There are a few approaches and methods for calculation of expected ground oscillation velocities according to charge weight per delay and the distance from the blast to the point of interest. Utilizations of these methods and formulas do not provide satisfactory results, thus the measured values on diverse distance from the blast field more or less differ from values given by previous calculations. Since blasting works are executed in diverse geological conditions, the aim of this research is the development of a practical and reliable approach which will give a different model for each construction site where blasting works have been or will be executed. The approach is based on a greater number of measuring points in line from the blast field at predetermined distances. This new approach has been compared with other generally used methods and formulas through the use of measurements taken during research along with measurements from several previously executed projects. The results confirmed that the suggested model gives more accurate values.

Surgical Results of Trabeculectomy and Ahmed Valve Implantation Following a Previous Failed Trabeculectomy in Primary Congenital Glaucoma Patients

OpenAIRE

Lee, Naeun; Ma, Kyoung Tak; Bae, Hyoung Won; Hong, Samin; Seong, Gong Je; Hong, Young Jae; Kim, Chan Yun

2015-01-01

Purpose To compare the surgical results of trabeculectomy and Ahmed glaucoma valve implantation after a previous failed trabeculectomy. Methods A retrospective comparative case series review was performed on 31 eye surgeries in 20 patients with primary congenital glaucoma who underwent trabeculectomy or Ahmed glaucoma valve implantation after a previous failed trabeculectomy with mitomycin C. Results The preoperative mean intraocular pressure was 25.5 mmHg in the trabeculectomy group and 26.9...

Stochastic spectral Galerkin and collocation methods for PDEs with random coefficients: A numerical comparison

KAUST Repository

Bäck, Joakim

2010-09-17

Much attention has recently been devoted to the development of Stochastic Galerkin (SG) and Stochastic Collocation (SC) methods for uncertainty quantification. An open and relevant research topic is the comparison of these two methods. By introducing a suitable generalization of the classical sparse grid SC method, we are able to compare SG and SC on the same underlying multivariate polynomial space in terms of accuracy vs. computational work. The approximation spaces considered here include isotropic and anisotropic versions of Tensor Product (TP), Total Degree (TD), Hyperbolic Cross (HC) and Smolyak (SM) polynomials. Numerical results for linear elliptic SPDEs indicate a slight computational work advantage of isotropic SC over SG, with SC-SM and SG-TD being the best choices of approximation spaces for each method. Finally, numerical results corroborate the optimality of the theoretical estimate of anisotropy ratios introduced by the authors in a previous work for the construction of anisotropic approximation spaces. © 2011 Springer.

Practical Methods in Li-ion Batteries

DEFF Research Database (Denmark)

Barreras, Jorge Varela

This thesis presents, as a collection of papers, practical methods in Li-ion batteries for simplified modeling (Manuscript I and II), battery electric vehicle design (III), battery management system testing (IV and V) and balancing system control (VI and VII). • Manuscript I tackles methodologies...... to parameterize battery models based solely on manufacturer’s datasheets • Manuscript II presents a parameterization method for battery models based on the notion of direct current resistance • Manuscript III proposes a battery electric vehicle design that combines fixed and swappable packs • Manuscript IV...... develops a battery system model for battery management system testing on a hardware-in-the-loop simulator • Manuscript V extends the previous work, introducing theoretical principles and presenting a practical method to develop ad hoc software and strategies for testing • Manuscript VI presents...

Proactive interference does not meaningfully distort visual working memory capacity estimates in the canonical change detection task

Directory of Open Access Journals (Sweden)

Po-Han eLin

2012-02-01

Full Text Available The change detection task has become a standard method for estimating the storage capacity of visual working memory. Most researchers assume that this task isolates the properties of an active short-term storage system that can be dissociated from long-term memory systems. However, long-term memory storage may influence performance on this task. In particular, memory traces from previous trials may create proactive interference that sometimes leads to errors, thereby reducing estimated capacity. Consequently, the capacity of visual working memory may be higher than is usually thought, and correlations between capacity and other measures of cognition may reflect individual differences in proactive interference rather than individual differences in the capacity of the short-term storage system. Indeed, previous research has shown that change detection performance can be influenced by proactive interference under some conditions. The purpose of the present study was to determine whether the canonical version of the change detection task—in which the to-be-remembered information consists of simple, briefly presented features—is influenced by proactive interference. Two experiments were conducted using methods that ordinarily produce substantial evidence of proactive interference, but no proactive interference was observed. Thus, the canonical version of the change detection task can be used to assess visual working memory capacity with no meaningful influence of proactive interference.

Proactive interference does not meaningfully distort visual working memory capacity estimates in the canonical change detection task.

Science.gov (United States)

Lin, Po-Han; Luck, Steven J

2012-01-01

The change detection task has become a standard method for estimating the storage capacity of visual working memory. Most researchers assume that this task isolates the properties of an active short-term storage system that can be dissociated from long-term memory systems. However, long-term memory storage may influence performance on this task. In particular, memory traces from previous trials may create proactive interference that sometimes leads to errors, thereby reducing estimated capacity. Consequently, the capacity of visual working memory may be higher than is usually thought, and correlations between capacity and other measures of cognition may reflect individual differences in proactive interference rather than individual differences in the capacity of the short-term storage system. Indeed, previous research has shown that change detection performance can be influenced by proactive interference under some conditions. The purpose of the present study was to determine whether the canonical version of the change detection task - in which the to-be-remembered information consists of simple, briefly presented features - is influenced by proactive interference. Two experiments were conducted using methods that ordinarily produce substantial evidence of proactive interference, but no proactive interference was observed. Thus, the canonical version of the change detection task can be used to assess visual working memory capacity with no meaningful influence of proactive interference.

"System evaluates system": method for evaluating the efficiency of IS

Directory of Open Access Journals (Sweden)

Dita Blazkova

2016-10-01

Full Text Available In paper I deal with the possible solution of evaluating the efficiency of information systems in companies. The large number of existing methods used to address the efficiency of information systems is dependent on the subjective responses of the user that may distort output evaluation. Therefore, I propose a method that eliminates the subjective opinion of a user as the primary data source. Applications, which I suggests as part of the method, collects relevant data. In this paper I describe the application in detail. This is a follow-on program on any system that runs parallel with it. The program automatically collects data for evaluation. Data include mainly time data, positions the mouse cursor, printScreens, i-grams of previous, etc. I propose a method of evaluation of the data, which identifies the degree of the friendliness of the information system to the user. Thus, the output of the method is the conclusion whether users, who work with the information system, can handle effectively work with it.

Equal Work, Unequal Pay: Gender Discrimination within Work-Similar Occupations.

Science.gov (United States)

Kemp, Alice Abel; Beck, E. M.

1986-01-01

Describes an empirical method to identify work-similar occupations using selected measures from the Dictionary of Occupational Titles. Examines male-female earnings differences within a group of work-similar occupations and finds that discrimination against females is extensive. (Author/CH)

A Novel Method Describing the Space Charge Limited Region in a Planar Diode

Directory of Open Access Journals (Sweden)

Mitra Ghergherehchi

2017-11-01

Full Text Available A novel and rather simple method is presented to describe the physics of space-charge region in a planar diode. The method deals with the issue in the time domain and as a consequence transient time behavior can be achieved. Potential distributions and currents obtained using this technique, supposing zero initial velocity for electrons, reveal absolute agreement with Child's results. Moreover, applying the method for non-zero uniform initial velocity for electrons, gives results which are in good agreement with previous works

Hepatitis B antigen HB Ag examination by radioimmunological method in a hemodialysis ward

Energy Technology Data Exchange (ETDEWEB)

Opatrny, K; Karlicek, V; Topolcan, O; Farnik, J [Karlova Universita, Plzen (Czechoslovakia). Lekarska Fakulta; Kulich, V [Transfuzni oddeleni FN, Plzen (Czechoslovakia)

1975-11-07

The results are reported of regular examinations for the so-called Australian antigen of patients, medical personnel, and of equipment and working surfaces in the hemodialysis ward of the Plzen university hospital using the Ling and Overby method by the Ausria-125 and Ausria II kits by Abbott. It was found that the radioimmunological method was more sensitive than methods previously used and that it allowed for early ascertainment of contamination, thus reducing nosocomial and professional infections and reducing the occurrence of the disease in the ward.

Distributed Project Work

DEFF Research Database (Denmark)

Borch, Ole; Kirkegaard, B.; Knudsen, Morten

1998-01-01

for information exchange in the traditional project environment is performed. A group of teachers and a student group using small project examples test the method. The first test group used a prototype for testing and found the new activity synchronization difficult to adapt, so the method was finally adjusted...... to be very precises and with success used on the second test group. Distributed project work is coming pretty soon and with little improvement in server tools, projects in different topics with a large and inhomogeneous profile of users are realistic.......Project work has been used for many years at Aalborg University to improve learning of theory and methods given in courses. In a closed environment where the students are forming a group in a single room, the interaction behaviour is more or less given from the natural life. Group work...

Exploring the Relationship Between Working Memory, Compressor Speed, and Background Noise Characteristics

OpenAIRE

Ohlenforst, Barbara; Souza, Pamela E.; MacDonald, Ewen

2016-01-01

Objectives: Previous work has shown that individuals with lower working memory demonstrate reduced intelligibility for speech processed with fast-acting compression amplification. This relationship has been noted in fluctuating noise, but the extent of noise modulation that must be present to elicit such an effect is unknown. This study expanded on previous study by exploring the effect of background noise modulations in relation to compression speed and working memory ability, using a range ...