HEAVY METAL CONTENT OF FLOOD SEDIMENTS AND PLANTS NEAR THE RIVER TISZA

Directory of Open Access Journals (Sweden)

SZILÁRD SZABÓ

2008-12-01

Full Text Available The River Tisza is Hungary’s especially important river. It is significant not only because of the source of energy and the value insured by water (hydraulical power, shipping route, stock of fish,aquatic environment etc. but the active floodplain between levees as well. Ploughlands, orchards, pastures, forests and oxbow lakes can be found here. They play a significant role in the life of the people living near the river and depend considerably on the quality of the sediments settled by the river. Several sources of pollution can be found in the catchment area of the River Tisza and some of them significantly contribute to the pollution of the river and its active floodplain. In this paper we study the concentration of zinc, copper, nickel and cobalt in sediments settled in the active floodplain and the ratio of these metals taken up by plants. Furthermore, our aim was to study the vertical distribution of these elements by the examination of soil profiles. The metal content of the studiedarea does not exceed the critical contamination level, except in the case of nickel, and the ratio of metals taken up by plants does not endanger the living organisms. The vertical distribution of metals in the soil is heterogeneous, depending on the ratio of pollution coming from abroad and the quality of flood.

Phytochemical, Proximate and Metal Content Analysis of the Leaves ...

African Journals Online (AJOL)

Methods: The phytochemical analysis of Psidium guajava was carried out by using a standard procedure. Ash, fat, protein, carbohydrate and fibre contents were determined using proximate analysis while the metal contents were determined using Pearson's method. Results: The phytochemical analysis revealed the ...

Calcium availability but not its content modulates metal toxicity in Scenedesmus quadricauda.

Science.gov (United States)

Kováčik, Jozef; Dresler, Sławomir

2018-01-01

Impact of calcium nutrition (pre-culture on solid medium with standard or elevated Ca dose, i. e. 0.17 and 4.40mM marked as low and high Ca) on acute metal toxicity (Cd, Mn and Pb, 24h of exposure to 10µM) in freshwater green alga Scenedesmus quadricauda was studied. Surprisingly, Ca content differed only slightly between low and high Ca samples and applied metals rather suppressed its amount. Na content was higher in metal-exposed high Ca samples, indicating that Ca/Na ratio may affect accumulation of metals. Content of heavy metals increased in order Cd < Mn < Pb and high Ca samples contained less metal than low Ca samples at least in absorbed fraction. Accumulation of ascorbic acid and thiols (GSH - glutathione and PC2 - phytochelatin 2) was affected mainly by Cd, GSH also by Mn and PC2 by Pb with often significant differences between low Ca and high Ca samples. Calcium nutrition also affected responses of algae to metals at the level of antioxidative enzyme activities (SOD, APX, and CAT) and elevated values were typically found in high Ca samples while ROS (hydrogen peroxide and superoxide radical) were mainly depleted in Mn treatment. These data confirm that Ca nutrition affects accumulation of metals in algae and metabolic parameters as observed in vascular plants but, unlike them, rather Ca/Na ratio than absolute Ca content seems to regulate the uptake of metals. Copyright © 2017 Elsevier Inc. All rights reserved.

metal content determination of some sexual dysfunction medicine

African Journals Online (AJOL)

userpc

METAL CONTENT DETERMINATION OF SOME SEXUAL DYSFUNCTION. MEDICINE ... motivation for sexual desire, functioning and response .... generated and optimization of the equipment ... by the users' have to be moderate otherwise it.

A REVIEW ON HEAVY METALS CONTENTS IN HIDE, SKIN AND PROCESSED LEATHERS

Directory of Open Access Journals (Sweden)

KOIZHAIGANOVA Meruyert

2016-05-01

Full Text Available Heavy metals are metals with high atomic weight which can be deposited in soil, water, plants and animals. It is generally known that mammal tissues are good bioindicators of trace elements, including heavy metals. Heavy metal analysis serves to identify and quantify the elements that are a potential hazard to the consumer after varying levels of contact. Usage area of leather is increasingly expanding in these days and it has also become a material requested and demanded by effect of fashion. Leather must protect its appearance and physical stability and also be problem-free in ecological terms and harmless to human health. There is a lack of data concerning the content of toxic elements in raw hide and skin of animals. Mainly information concerning metals content, including toxic ones, in processed leathers may be found in the literature. The aim of the present study was to review and compare the content of some heavy metals in raw hide, skin and the processed leathers in order to evaluate their accumulation and transition to the end-up product.

Influence of growing conditions on heavy metals content in cultivated mushrooms

International Nuclear Information System (INIS)

Kmitene, L.

1997-01-01

The aim of the research was to investigate the influence of growing terms, microclimate conditions and growing medium on the mushroom harvest and quality. Champignons were grown according to the Polish technology. Pleurotus ostreatus was grown in perforate sacks using chopped wheat straw. Mycelium was sowed in different terms. It was established that the harvest of mushrooms, especially their quality, depends not only on growing conditions, but also on the kind of mushrooms, composte quality, mushroom size (diameter of cap), picking of mushrooms, storage time and other conditions. The technology of mushroom growing will be developed after studying all the factors determining the content of heavy metals and radiation in mushrooms

Mineral and heavy metal contents of the outer and inner tissues of commonly used fruits.

Science.gov (United States)

Özcan, Mehmet Musa; Harmankaya, Mustafa; Gezgin, Sait

2012-01-01

The rate of heavy metal pollution in some minor fruit samples growing at roadsides in Turkey were determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). The mineral contents of samples were found to be different depending on the several parts Citrus fruits. The highest minor and heavy metal levels for Citrus fruits were determined between 17.24 and 45.30 mg/kg boron, 2.08 and 15.05 mg/kg copper, 1.01 and 16.00 mg/kg iron and 2.35 and 9.87 mg/kg zinc. Boron content ranged from 16.54 mg/kg (Deveci pear inner pulp) to 89.89 mg/kg (Arjantin apple outer skin). The level of Fe ranged from 1.49 mg/kg (quince pulp) to 25.05 mg/kg (Ankara pear pulp). Cu content of fruits ranged between 2.52 mg/kg (Fuji apple skin) and 25.93 mg/kg quince skin). Zn content was found between 0.46 mg/kg (Golden apple pulp) and 14.34 mg/kg (quince skin). P contents ranged from 651 mg/kg (Golden apple pulp) to 1269 mg/kg (quince skin). Na was found between 500 mg/kg (Fuji apple skin) and 907 mg/kg (Arjantin apple skin).

Heavy Metal Contents in Some Commonly Consumed Vegetables

African Journals Online (AJOL)

dell

This work reports on the levels of cadmium, lead, copper, manganese and ... source of both heavy metals and essential trace elements due to their ... content, clay mineral and other soil chemical ... addition, the interactions of soil-plant root-.

Heavy metal contents and other physical quality indices of sewerage, canal and drinking water

International Nuclear Information System (INIS)

Mahmood, S.; Sattar, A.; Ihsanullash; Atta, S.; Arif, S. University of Engineering and Technology, Peshawar

2001-01-01

Analysis of Cd, Pb and Cu in canal, sewerage and drinking water by potentiometric stripping analysis (PSA) is described. Other quality indices of water such as temperature, pH, EC and total solid were also determined. The levels of heavy metal contents of sewerage, canal and drinking water revealed marked differences and wide coefficient of variability (CV). Generally Cd and Pb contents were higher in sewerage than canal and drinking water. However, Cu content of drinking waters was higher than other water tested. The total solids were found to be generally higher in sewerage and canal water than drinking water tested. The total solids were found to be generally higher in sewerage and canal water than drinking water The variations in temperature, pH and EC were marginal to marked depending upon the source and the location. (author)

Content dependent information flow control

DEFF Research Database (Denmark)

Nielson, Hanne Riis; Nielson, Flemming

2017-01-01

Information flow control extends access control by not only regulating who is allowed to access what data but also the subsequent use of the data. Applications within communications systems require such information flow control to be dependent on the actual contents of the data. We develop...

A study of the metal content of municipal solid waste. Final report

Energy Technology Data Exchange (ETDEWEB)

Churney, K.L.; Domalski, E.S.

1998-01-01

Knowledge of the content of toxic components, so called pollutant precursors, in the municipal solid waste (MSW) stream is essential to development of the strategies for source reduction and reuse, recycling, composting and disposal. Data are scarce; trends in composition for any locality even more so. In a previous study the total and water soluble chlorine content of the components of municipal solid waste were determined from sampling studies at two sites, Baltimore County, MD, and Brooklyn, NY, each for a five day period. The total sulfur content of the combined combustible components was also determined. Because of the scarcity of data and synergistic effects, it seemed appropriate to determine the heavy metal content of the preceding material prior to its disposal. The metals chosen were the so-called priority pollutant metals (PPM): antimony, arsenic, beryllium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, thallium, and zinc.

SDSS-IV MaNGA: modelling the metallicity gradients of gas and stars - radially dependent metal outflow versus IMF

Science.gov (United States)

Lian, Jianhui; Thomas, Daniel; Maraston, Claudia; Goddard, Daniel; Parikh, Taniya; Fernández-Trincado, J. G.; Roman-Lopes, Alexandre; Rong, Yu; Tang, Baitian; Yan, Renbin

2018-05-01

In our previous work, we found that only two scenarios are capable of reproducing the observed integrated mass-metallicity relations for the gas and stellar components of local star-forming galaxies simultaneously. One scenario invokes a time-dependent metal outflow loading factor with stronger outflows at early times. The other scenario uses a time-dependent initial mass function (IMF) slope with a steeper IMF at early times. In this work, we extend our study to investigate the radial profile of gas and stellar metallicity in local star-forming galaxies using spatially resolved spectroscopic data from the SDSS-IV MaNGA survey. We find that most galaxies show negative gradients in both gas and stellar metallicity with steeper gradients in stellar metallicity. The stellar metallicity gradients tend to be mass dependent with steeper gradients in more massive galaxies while no clear mass dependence is found for the gas metallicity gradient. Then we compare the observations with the predictions from a chemical evolution model of the radial profiles of gas and stellar metallicities. We confirm that the two scenarios proposed in our previous work are also required to explain the metallicity gradients. Based on these two scenarios, we successfully reproduce the radial profiles of gas metallicity, stellar metallicity, stellar mass surface density, and star formation rate surface density simultaneously. The origin of the negative gradient in stellar metallicity turns out to be driven by either radially dependent metal outflow or IMF slope. In contrast, the radial dependence of the gas metallicity is less constrained because of the degeneracy in model parameters.

HEAVY METAL CONTENT OF AYURVEDIC HERBAL MEDICINE PRODUCTS

Science.gov (United States)

Case reports of individuals taking Ayurvedic herbal medicine products (HMPs) suggest that they may contain lead, mercury, and/or arsenic. We analyzed the heavy metal content of Ayurvedic HMPs manufactured in India and Pakistan, available in South Asian grocery stores in the Bost...

Classifying the metal dependence of uncharacterized nitrogenases

Directory of Open Access Journals (Sweden)

Shawn E Mcglynn

2013-01-01

Full Text Available Nitrogenase enzymes have evolved complex iron-sulfur (Fe-S containing cofactors that most commonly contain molybdenum (MoFe, Nif as a heterometal but also exist as vanadium (VFe, Vnf and heterometal independent (Fe-only, Anf forms. All three varieties are capable of the reduction of dinitrogen (N2 to ammonia (NH3 but exhibit differences in catalytic rates and substrate specificity unique to metal type. Recently, N2 reduction activity was observed in archaeal methanotrophs and methanogens that encode for nitrogenase homologs which do not cluster phylogenetically with previously characterized nitrogenases. To gain insight into the metal cofactors of these uncharacterized nitrogenase homologs, predicted three-dimensional structures of the nitrogenase active site metal-cofactor binding subunits NifD, VnfD, and AnfD were generated and compared. Dendograms based on structural similarity indicate nitrogenase homologs cluster based on heterometal content and that uncharacterized nitrogenase D homologs cluster with NifD, providing evidence that the structure of the enzyme has evolved in response to metal utilization. Characterization of the structural environment of the nitrogenase active site revealed amino acid variations that are unique to each class of nitrogenase as defined by heterometal cofactor content; uncharacterized nitrogenases contain amino acids near the active site most similar to NifD. Together, these results suggest that uncharacterized nitrogenase homologs present in numerous anaerobic methanogens, archaeal methanotrophs, and firmicutes bind FeMo-co in their active site, and add to growing evidence that diversification of metal utilization likely occurred in an anaerobic habitat.

Heavy Metal Content in Terraced Rice Fields at Sruwen Tengaran Semarang - Indonesia

Science.gov (United States)

Hindarwati, Yulis; Soeprobowati, Tri Retnaningsih; Sudarno

2018-02-01

The presence of heavy metal on agricultural soils can be caused not only natural factors but also due to human intervention. Differences in management and lack of understanding of farmers in the production input of fertilizers and pesticides ensued in land ravaged. Periodic testing of paddy fields is necessary to minimize the contaminants from being absorbed by plants that will have an impact on health decline. The purpose of the assessment was to identify the heavy metal content in the terraced rice field in Sruwen Village, Tengaran District, Semarang Regency. Survey was conducted in February 2017. Sampling on terraced rice fields of different heights consisted of upper, middle, and upper down. Taken as many as eight single points and composed at a depth of 0-20 cm and 20-40 cm. The identification results showed that heavy metal content of Pb, Cd, and Cu were present at all altitudes. Heavy Metals Pb and Cd at a depth of 0-20 cm were higher from 20-40 cm in the upper and lower rice fields but lower in the middle rice field. Cu heavy metal at a depth of 0-20 cm was higher than 20-40 cm in all altitude land. The heavy metal content of Pb, Cd, and Cu was still below the heavy metal standard set by the European Union and India.

Determination of Sugar and Some Trace Metals Content in Selected ...

African Journals Online (AJOL)

Ten brands of commercial fruit juices were analyzed for pH, specific gravity, total solids, reducing sugar and total sugar trace metals contents. The pH was determined using a Hanna pH meter. Sugar content was determined using the Lane and Eynon method. Sodium and potassium were determined by flame photometry ...

Measuring time-dependent deformations in metallic MEMS

NARCIS (Netherlands)

Bergers, L.I.J.C.; Hoefnagels, J.P.M.; Delhey, N.K.R.; Geers, M.G.D.

2011-01-01

The reliability of metallic microelectromechanical systems (MEMS) depends on time-dependent deformation such as creep. Key to this process is the interaction between microstructural length scales and dimensional length scales, so-called size-effects. As a first critical step towards studying these

77 FR 60478 - Control of Ferrite Content in Stainless Steel Weld Metal

Science.gov (United States)

2012-10-03

... NUCLEAR REGULATORY COMMISSION [[NRC-2012-0231] Control of Ferrite Content in Stainless Steel Weld... draft regulatory guide (DG), DG-1279, ``Control of Ferrite Content in Stainless Steel Weld Metal.'' This guide describes a method that the NRC staff considers acceptable for controlling ferrite content in...

Effects of residues from municipal solid waste landfill on corn yield and heavy metal content

International Nuclear Information System (INIS)

Prabpai, S.; Charerntanyarak, L.; Siri, B.; Moore, M.R.; Noller, Barry N.

2009-01-01

The effects of residues from municipal solid waste landfill, Khon Kaen Municipality, Thailand, on corn (Zea mays L.) yield and heavy metal content were studied. Field experiments with randomized complete block design with five treatments (0, 20, 40, 60 and 80% v/v of residues and soil) and four replications were carried out. Corn yield and heavy metal contents in corn grain were analyzed. Corn yield increased by 50, 72, 85 and 71% at 20, 40, 60 and 80% treatments as compared to the control, respectively. All heavy metals content, except cadmium, nickel and zinc, in corn grain were not significantly different from the control. Arsenic, cadmium and zinc in corn grain were strongly positively correlated with concentrations in soil. The heavy metal content in corn grain was within regulated limits for human consumption.

Rare earth elements and critical metal content of extracted landfilled material and potential recovery opportunities

Energy Technology Data Exchange (ETDEWEB)

Gutiérrez-Gutiérrez, Silvia C.; Coulon, Frédéric; Jiang, Ying; Wagland, Stuart, E-mail: s.t.wagland@cranfield.ac.uk

2015-08-15

Highlights: • Samples from multiple core drills were obtained from 4× landfill sites in the UK. • Each sample analysed for rare earth elements, critical metals and valuable metals. • Two stage microwave digestion method ensuring high yield. • High quantities of copper and aluminium were observed in the soil layers of landfill. • Across 4× landfills aluminium and copper present has a value of around $400 million. - Abstract: Rare earth elements (REEs), Platinum group metals (PGMs) and other critical metals currently attract significant interest due to the high risks of supply shortage and substantial impact on the economy. Their uses in many applications have made them present in municipal solid waste (MSW) and in commercial and industrial waste (C&I), since several industrial processes produce by-products with high content of these metals. With over 4000 landfills in the UK alone, the aim of this study was to assess the existence of these critical metals within landfills. Samples collected from four closed landfills in UK were subjected to a two-step acid digestion to extract 27 metals of interest. Concentrations across the four landfill sites were 58 ± 6 mg kg{sup −1} for REEs comprising 44 ± 8 mg kg{sup −1} for light REEs, 11 ± 2 mg kg{sup −1} for heavy REEs and 3 ± 1 mg kg{sup −1} for Scandium (Sc) and 3 ± 1.0 mg kg{sup −1} of PGMs. Compared to the typical concentration in ores, these concentrations are too low to achieve a commercially viable extraction. However, content of other highly valuable metals (Al and Cu) was found in concentrations equating to a combined value across the four landfills of around $400 million, which increases the economic viability of landfill mining. Presence of critical metals will mainly depend on the type of waste that was buried but the recovery of these metals through landfill mining is possible and is economically feasible only if additional materials (plastics, paper, metallic items and other) are

Effect of MoSi2 Content on Dry Sliding Tribological Properties of Zr-Based Bulk Metallic Glass Composites

Science.gov (United States)

Liu, Longfei; Yang, Jun

2017-12-01

Zr55Cu30Al10Ni5 bulk metallic glass and its composites were prepared by suction casting into a copper mold. The effect of MoSi2 content on the tribological behavior of Zr55Cu30Al10Ni5 BMG was studied by using a high-speed reciprocating friction and wear tester. The results indicate that the friction coefficient and wear resistance of the BMGs can be improved by a certain amount of crystalline phase induced by MoSi2 content from 1 to 3% and deteriorated with MoSi2 content of 4%. The wear mechanism of both the metallic glass and its composite is abrasive wear. The mechanism of crystalline phase-dependent tribological properties of the composite was discussed based on the wear track and mechanical properties in the present work. The wear behavior of Zr55Cu30Al10Ni5 BMG and its composite indicates that a good combination of the toughness and the hardness can make the composite be well wear resistant.

Assessment of the contrast of rare metal ores

International Nuclear Information System (INIS)

Kuznetsova, O.V.

1987-01-01

The method of rapid assessment of useful component content on the basis of X-ray radiometric method of analysis of non-crushed ore lumps is presented. Using as an example rare metal deposits, linear dependence between logarithms of Nb 2 O 6 contents and the value of fragment separation index during radiometric separation is established. The use of the dependence ensures sufficient accuracy for the characteristic of rare metal ore content

The heavy metals content in wild growing mushrooms from burdened Spiš area

Directory of Open Access Journals (Sweden)

Marek Slávik

2016-05-01

Full Text Available In this work, we evaluated the rate of entry of heavy metals into the edible parts of wild mushrooms, from central Spiš area. The area is characterized by extremely high content of heavy metals particularly mercury in abiotic and biotic components of ecosystems. The toxicity of heavy metals is well known and described. Known is also the ability of fungi to accumulate contaminants from substrates in which mushrooms grow. We have collected commonly consumed species of mushrooms (Russula vesca., Macrolepiota procera, Lycoperdon pyriforme, Lecinum piceinum, Boletus reticulatus. Sampling was conducted for two years 2012 and 2013. The samples taken mushrooms and substrates on which to grow, we determined heavy metal content (Cd, Pb, Cu, including total mercury content modified by atomic absorption spectrometry (AMA - 254. In the substrate, we determined the humus content and pH value. The heavy metal content in soils were evaluated according to Law no. 220/2004 Z.z The exceedance limit values of Cd, Pb, Cu and Hg was recorded. Most significantly the respective limit was recorded in soil samples in the case of mercury. The determined concentration Hg was 39.01 mg.kg-1. From the results, we evaluated the degree of ability to bioaccumulate heavy metals different kinds of fungi. We also evaluated the health safety of the consumption of these fungi on the comparison with the limit values provided in the food code of SR. We recorded a high rate of accumulation of mercury in the species Boletus reticulatus and Macrolepiota procera. For these types we recorded the most significant than allowed concentrations of mercury in mushrooms. The highest recorded concentration reached 17.64 mg.kg-1 Hg in fresh matter. The limit value was exceeded also in the case of copper. We do not recommend to increased consumption of wild mushrooms in the reference area.

Heavy metal content of combustible municipal solid waste in Denmark.

Science.gov (United States)

Riber, Christian; Fredriksen, Gry S; Christensen, Thomas H

2005-04-01

Data on the heavy metal composition of outlets from Danish incinerators was used to estimate the concentration of Zn, Cu, Pb, Cr, Ni, Cd, As and Hg in combustible waste (wet as received) at 14 Danish incinerators, representing about 80% of the waste incinerated in Denmark. Zn (1020 mg kg(-1)), Cu (620 mg kg(-1)) and Pb (370 mg kg(-1)) showed the highest concentration, whereas Hg (0.6 mg kg(-1)) showed the lowest concentration. The variation among the incinerators was in most cases within a factor of two to three, except for Cr that in two cases showed unexplained high concentrations. The fact that the data represent many incinerators and, in several cases, observations from a period of 4 to 5 years provides a good statistical basis for evaluating the content of heavy metals in combustible Danish waste. Such data may be used for identifying incinerators receiving waste with high concentrations of heavy metals suggesting the introduction of source control, or, if repeated in time, the data must also be used for monitoring the impacts of national regulation controlling heavy metals. It is recommended that future investigations consider the use of sample digestion methods that ensure complete digestion in order to use the data for determining the total heavy metal content of waste.

ASSESSMENT OF HEAVY METALS CONTENTS IN BOTTOM SEDIMENTS OF BUG RIVER

Directory of Open Access Journals (Sweden)

Elżbieta Skorbiłowicz

2014-07-01

Full Text Available The development of industry, agriculture, and transport contributes to an increased environmental pollution by heavy metals. The aim of the study was preliminary assessment of the contents of selected metals (lead, cobalt, copper, chromium, cadmium and nickel in the sediments of Bug river. The study comprised part of the river flowing through Poland. It was found that the Bug river sediments are not contaminated in respect to the content of tested metals. Based on the analysis of the study results, these metals can be lined up in the following order: Cr > Pb > Cu > Ni > Co > Cd. Statistical analysis showed that copper and chromium occur in Bug river sediments in forms bindings with organic matter in majority of cases. The granulometric analysis of sediments from Bug river revealed the largest percentage of two fractions: 1.0–0.2 mm with average of 47.7 ± 19.77% and 0.2–0.1 mm with average of 20.6 ± 7.7%. These are the dominant fractions with the accumulation of metals in river sediments, which has been confirmed by statistical analysis.

Content Heavy Metal Pb, Cd In Perna viridis And Sediments In Semarang Bay

Science.gov (United States)

Suprapto, D.; Suryanti, S.; Latifah, N.

2018-02-01

Waste disposal from human activities, generally contain heavy metals such as Pb and Cd which derived from industrial activities. The aims of the study were to know the concentration of Pb and Cd heavy metals contained in Perna viridis tissue, sediment and water at Semarang Bay. This study was conducted in May 2017 at Semarang Bay. - Samples were collected using purposive sampling method. The heavy metal content in the water and clam was observed using- APHA method and was analyzed using AAS (Atomic Absorption Spectrophotometer). The results showed that concentration of heavy metal of Pb in the water was 0.00-50.5mg/L and the Cd content was of 26.9-51.7 mg/L, whereas the concentration of Pb in the sediment is 445.5-2.053.0mg/L and Cd 963.3-2,150.0 mg/L. Pb content in soft tissue of Perna viridis - is 67.1-1.933.9 mg/L and the concentration of Cd was 203.5-5.787.3 mg/L. The analysis of Pb and Cd in seawater, sediment and soft tissue of Perna viridis according to Enviroment Ministerial decree (KepMenLH ) number 51 of 2004 and applied by NOAA 1999 does not exceed the quality standard, that meant that the Perna viridis has been contaminated by metal Pb it is controversial with the above sentence and Cd. It concluded that the metal content of Pb and Cd in Perna viridis tissue exceeds the quality standard, so it is not suitable to be consumed, especially in high quantity

Metal ions released from fixed orthodontic appliance affect hair mineral content.

Science.gov (United States)

Mikulewicz, Marcin; Wołowiec, Paulina; Loster, Bartłomiej; Chojnacka, Katarzyna

2015-02-01

The objective was to evaluate metal ion accumulation in hair of patients undergoing orthodontic treatment with fixed appliances in time. The patients (N = 47) participated in a questionnaire survey. Hair sampling was performed at the beginning and in the 4th, 8th, and 12th month of the treatment. The content of metals (Cr, Ni, Fe) in hair was analyzed by ICP-OES equipped with USN nebulizer. The peak release of Cr and Fe occurred after 4 months of the treatment, and the peak release of Ni gradually increased throughout the whole year of the therapy. During 1 year treatment, an average accumulation of metals in hair tissue was 7.42 ± 14.19 μg of Ni, 8.94 ± 13.1 μg of Cr, and 131 ± 279 μg of Fe. The mean content of Cr was higher than the 90th percentile value for this element. The upper limit of literature reference ranges for Cr, Ni, and Fe in hair was not exceeded. The value of exposure (kinetics and dose) of orthodontic patients to metal ions released from orthodontic appliances can be assessed by hair mineral analysis. The content of Cr was statistically significantly higher during the treatment than before the beginning of therapy.

Physico-chemical parameters and heavy metal contents of Ibuya ...

African Journals Online (AJOL)

The physico-chemical parameters and heavy metal contents of Ibuya River were investigated between September 2012 and August 2013 from four stations using standard methods to etermine acceptable water quality standards and evaluate possible sustainability of a thriving fisheries cum tourist sport fishing venture.

The relationship of heavy metals contents in soils to their content in legume seeds used in famous traditional food in kurdistan region-iraq

Directory of Open Access Journals (Sweden)

Dalaram Sullaiman Ismael

2016-11-01

Full Text Available In this work the level of risk heavy metals contents in Cowpea seeds comparison with heavy metal content in soil was studied. For the experiment three cowpea cultivars (brown, red, white were used. Cowpeas were harvested at full ripeness in Kalak location in Erbil city. The flame AAS (AAS Varian AA Spectr. DUO 240 FS/240Z/UltrAA was used for the determination of heavy metal contents in soil and plant materials. The soil which cultivated Cowpea, characterized neutral to slit alkali, with a typical content of cations K, Mg and P. Beans and the seeds of faba bean, cowpea and chickpeas boiled with salt eaten in the form of Lablabe, traditionly used heavy sweets such as knafa. Ful, which is fava beans cooked with chickpeas (garbanzo beans or make soup from fresh cowpea, fresh faba bean, fresh fasoulia, as well as lentil soup (shorbat adas and different kinds of salad after boiled. Cowpea grain legumes occupy an important place in human nutrition, especially in the dietary pattern of low income groups of people in developing countries. The level risk heavy metal contents in the soil determined was only Cd content was on the level of limit value given for the soil extract by aqua regia as well as Co content was higher than the limit value given for the relationship between soil and plant. All of determined values were lower than critical value extracted by NH4NO3 only the maximal available soil content of mobile Pb forms was exceeded but cowpea accumulated seeds in amounts the risky elements contents, with the exception of Ni, did not exceed limit for the maximum levels of chosen risk elements in studied legume. The content of the metals studied with the exception of cadmium, not exceed the maximum permissible value in legumes, as defined in the Codex Alimentarius. The aim of this research, to study or determine the content of risky heavy metals (Cu, Ni, Cr, Pb, and Cd in the soil and their relationship in selected varieties cowpea seeds cultivar. Faba

Heavy metal content of selected African leafy vegetables planted in ...

African Journals Online (AJOL)

Heavy metal content of selected African leafy vegetables planted in urban and peri-urban Nairobi, Kenya. ... African Journal of Environmental Science and Technology ... Government clean-up activities and monitoring of waste disposal is ...

Studies of heavy metal contents and microbial composition of ...

African Journals Online (AJOL)

This study investigated the heavy metal content and microbial composition of rhizosphere of Panicum maximum obtained from some auto mechanic workshops in Benin City, Nigeria. The grass was uprooted and soil sample was taken from its rhizosphere. The sample were labeled appropriately and immediately transported ...

Determination of the Content of Heavy Metals in Pyrite Contaminated Soil and Plants

Directory of Open Access Journals (Sweden)

Miroslava Marić

2008-09-01

Full Text Available Determination of a pyrite contaminated soil texture, content of heavy metals in the soil and soil pH, was the aim in the investigation. Acidification of damaged soil was corrected by calcium carbonate. Mineral nutrients and organic matter (NPK, dung, earthworm cast, straw and coal dust were added to damaged soil. Afterwards, the soil was used for oat production. Determination of total heavy metal contents (Cu, Pb, Zn, Fe in soil was performed by atomic absorption spectrofotometry. Plant material (stems, seeds was analysed, too. Total concentration of the heavy metals in the plant material were greater than in crop obtained in unaffected soil.

Analysis of Metal Content of Samples of Gloriosa Superba L ...

African Journals Online (AJOL)

Purpose: To determine the metallic content of different parts of Gloriosa superba collected ... Results: Of the detected micronutrients, high concentrations of Zn, Fe and Mn were noted for samples ... Hitachi 2000) and flame photometer (Jenway.

A study on compound contents for plastic injection molding products of metallic resin pigment

International Nuclear Information System (INIS)

Park, Young Whan; Kwak, Jae Seob; Lee, Gyu Sang

2016-01-01

Injection molding process is widely used for producing most plastic products. In order to make a metal-colored plastic product especially in modern luxury home alliances, metallic pigments which are mixed to a basic resin material for injection molding are available. However, the process control for the metal-colored plastic product is extremely difficult due to non-uniform melt flow of the metallic resin pigments. To improve the process efficiency, a rapid mold cooling method by a compressed cryogenic fluid and electricity mold are also proposed to decrease undesired compound contents within a molded plastic product. In this study, a quality of the metal-colored plastic product is evaluated with process parameters; injection speed, injection pressure, and pigment contents, and an influence of the rapid cooling and heating system is demonstrated

A study on compound contents for plastic injection molding products of metallic resin pigment

Energy Technology Data Exchange (ETDEWEB)

Park, Young Whan; Kwak, Jae Seob [Dept. of Mechanical Engineering, Pukyong National University, Busan (Korea, Republic of); Lee, Gyu Sang [Alliance Molding Engineering TeamLG Electronics Inc., Osan (Korea, Republic of)

2016-12-15

Injection molding process is widely used for producing most plastic products. In order to make a metal-colored plastic product especially in modern luxury home alliances, metallic pigments which are mixed to a basic resin material for injection molding are available. However, the process control for the metal-colored plastic product is extremely difficult due to non-uniform melt flow of the metallic resin pigments. To improve the process efficiency, a rapid mold cooling method by a compressed cryogenic fluid and electricity mold are also proposed to decrease undesired compound contents within a molded plastic product. In this study, a quality of the metal-colored plastic product is evaluated with process parameters; injection speed, injection pressure, and pigment contents, and an influence of the rapid cooling and heating system is demonstrated.

Selected Heavy Metals Content in Soil and Arundina graminifolia from Pelepah Kanan Mine, Kota Tinggi, Johor, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Zulfahmi Ali Rahman; Wan Mohd Razi Idris; Azman Hashim; Tukimat Lihan; Muhd Barzani Gasim; Jumaat Adam; Lim, F.N.

2009-01-01

Heavy metals composition of Cd, Co, Cr, Ni, Pb and Zn in Arundina graminifolia collected from mining area at Lombong Pelepah Kanan, Kota Tinggi, Johor were determined. The heavy metal content was also analysed in their soil substrates. The plants were separated into different portions for example root, stem and leaf and extracted for their heavy metal content by digestion method whereas the soils heavy metal content was extracted by sequential extraction. Heavy metal content in soil and plant extract was determined using the Flame Atomic Absorption Spectrophotometer. Heavy metal contents of Cd, Cr, Ni and Pb in plants were compared with their content in the control plant, whereas the Co and Zn contents were three to five folds higher. As for heavy metal content in different plant parts, it was found that Cd concentration was high in roots (2.03 mg/ kg) followed by leaf (1.67 mg/ kg) and stem (1.49 mg/ kg). Co concentration was high in leaf (9.26 mg/ kg) followed by root (9.18 mg/ kg) and stem (6.94 mg/ kg). For Cr, the concentration in decreasing sequence was root (0.46 mg/ kg) > leaf (0.19 mg/ kg) > stem (0.08 mg/ kg). Ni concentration was higher in leaf (2.78 mg/ kg) followed by root (2.71 mg/ kg) and stem (1.66 mg/ kg). Concentration in decreasing order was root (10.34 mg/ kg) > leaf (4.18 mg/ kg) > stem (3.75 mg/ kg). Zn concentration was higher in leaf (44.03 mg/ kg) followed by root (32.30 mg/ kg) and stem (13.21 mg/ kg). Total heavy metal content in soil was 2.07 - 5.59 mg/ kg, 8.72 - 39.93 mg/ kg, 1.81 - 2.14 mg/ kg, 2.66 - 6.87 mg/ kg, 23.02 - 51.56 mg/ kg and 0.64 - 2.61 mg/ kg for Ni, Zn, Cd, Pb, Co and Cr, respectively. The available fraction of heavy metals in soil was 21.9 % for Ni, 15.3 % for Zn, 49.9 % for Cd, 19.3 % for Pb, 45.7 % for Co and nil percent for Cr. Biological adsorption coefficient for the heavy metals studied was very low except for Zn where BAC value slightly higher than 1. This plant was not suitable to be used as a phyto

The effects of heavy metal ions on the chlorophyll content and cell membrane permeability of charophytes

International Nuclear Information System (INIS)

Fu Hualong; Chen Hao; Dong Bin; Qing Renwei

2001-01-01

The authors studied the effects of several heavy metal ions in different concentrations (Cd 2+ , Hg 2+ , Pb 2+ , Cr 6+ ) on the chlorophyll content and cell membrane permeability of Chara vulgaris L. It was discovered that the effects of heavy metal ions on the chlorophyll content and cell membrane permeability of Chara vulgaris L. changed with their different concentration. The trend was that the chlorophyll content and cell membrane permeability were decreased with the increase of the heavy metal ions. The degree of chlorophyll content affected was Cr 6+ , Cd 2+ , Hg 2+ , Pb 2+ , and that of cell membrane permeability affected was Cd 2+ , Cr 6+ , Hg 2+ , Pb 2+

Visualizing Metal Content and Intracellular Distribution in Primary Hippocampal Neurons with Synchrotron X-Ray Fluorescence.

Directory of Open Access Journals (Sweden)

Robert A Colvin

Full Text Available Increasing evidence suggests that metal dyshomeostasis plays an important role in human neurodegenerative diseases. Although distinctive metal distributions are described for mature hippocampus and cortex, much less is known about metal levels and intracellular distribution in individual hippocampal neuronal somata. To solve this problem, we conducted quantitative metal analyses utilizing synchrotron radiation X-Ray fluorescence on frozen hydrated primary cultured neurons derived from rat embryonic cortex (CTX and two regions of the hippocampus: dentate gyrus (DG and CA1. Comparing average metal contents showed that the most abundant metals were calcium, iron, and zinc, whereas metals such as copper and manganese were less than 10% of zinc. Average metal contents were generally similar when compared across neurons cultured from CTX, DG, and CA1, except for manganese that was larger in CA1. However, each metal showed a characteristic spatial distribution in individual neuronal somata. Zinc was uniformly distributed throughout the cytosol, with no evidence for the existence of previously identified zinc-enriched organelles, zincosomes. Calcium showed a peri-nuclear distribution consistent with accumulation in endoplasmic reticulum and/or mitochondria. Iron showed 2-3 distinct highly concentrated puncta only in peri-nuclear locations. Notwithstanding the small sample size, these analyses demonstrate that primary cultured neurons show characteristic metal signatures. The iron puncta probably represent iron-accumulating organelles, siderosomes. Thus, the metal distributions observed in mature brain structures are likely the result of both intrinsic neuronal factors that control cellular metal content and extrinsic factors related to the synaptic organization, function, and contacts formed and maintained in each region.

Amelioration of iron mine soils with biosolids: Effects on plant tissue metal content and earthworms.

Science.gov (United States)

Cele, Emmanuel Nkosinathi; Maboeta, Mark

2016-11-01

The achievement of environmentally sound and economically feasible disposal strategies for biosolids is a major issue in the wastewater treatment industry around the world, including Swaziland. Currently, an iron ore mine site, which is located within a wildlife sanctuary, is being considered as a suitable place where controlled disposal of biosolids may be practiced. Therefore, this study was conducted to investigate the effects of urban biosolids on iron mine soils with regard to plant metal content and ecotoxicological effects on earthworms. This was done through chemical analysis of plants grown in biosolid-amended mine soil. Earthworm behaviour, reproduction and bioaccumulation tests were also conducted on biosolid-amended mine soil. According to the results obtained, the use of biosolids led to creation of soil conditions that were generally favourable to earthworms. However, plants were found to have accumulated Zn up to 346 mg kg -1 (in shoots) and 462 mg kg -1 (in roots). This was more than double the normal Zn content of plants. It was concluded that while biosolids can be beneficial to mine soils and earthworms, they can also lead to elevated metal content in plant tissues, which might be a concern to plant-dependant wildlife species. Nonetheless, it was not possible to satisfactorily estimate risks to forage quality since animal feeding tests with hyperaccumulator plants have not been reported. Quite possibly, there may be no cause for alarm since the uptake of metals from soil is greater in plants grown in pots in the greenhouse than from the same soil in the field since pot studies fail to mimic field conditions where the soil is heterogeneous and where the root system possesses a complex topology. It was thought that further field trials might assist in arriving at more satisfactory conclusions.

Size-dependent electronic properties of metal nanostructures

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Size-dependent electronic properties of metal nanostructures. G.U. Kulkarni. Chemistry and Physics of Materials Unit. Jawaharlal Nehru Centre for Advanced Scientific Research. Bangalore, India. kulkarni@jncasr.ac.in.

Heavy Metal Contents in Spices from Markets in Sarajevo, Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Huremović, J.

2014-05-01

Full Text Available Spices are some of the most common foods in the human diet around the world. Spices are dried parts of plants used often as diet components to improve aroma and acceptability of food. The aim of this work was to determine the contents of seven heavy metals (Cr, Cu, Fe, Mn, Ni, Pb and Zn in spices available at local markets in Sarajevo. Metal concentrations in six spice samples (black pepper (Piper nigrum, basil (Ocimum basilicum, oregano (Oreganum vulgaris, paprika (Capsicum annuum, parsley (Petroselinum crispum and rosemary (Rosmarinus officinalis were determined by flame atomic absorption spectrometry. The content of chromium and nickel in all samples was below 5 mg kg-1 . Copper levels were in the range of 2.36-19.47 mg kg-1 , iron 6.80-785.56 mg kg-1 , manganese 6.14-59.36 mg kg-1 , lead 0.74-20.35 and zinc 6.93-85.44 mg kg-1 . These results were in agreement with other published data except in the case of Pb which content was slightly higher. Daily intake of different metals was calculated and compared with the MRL values given by ATSDR (2013. The content of lead in most of the samples was above the maximum permitted concentrations recommended by WHO and national regulations of Bosnia and Herzegovina.  

Contents and localization of heavy metals in human placentae

Energy Technology Data Exchange (ETDEWEB)

Reichrtova, E.; Ursinyova, M.; Palkovicova, L.; Wsolova, L. [Institute of Preventive and Clinical Medicine, Bratislava (Slovakia)

1998-06-01

The placenta was used as an exposure index for the risk evaluation of prenatal fetal chemical exposure. Full-term placenta samples collected at maternity hospitals in 4 regions of different environmental pollutants and traffic density were examined for lead and cadmium contents using atomic absorption spectrometry (AAS). The results showed similar lead contents in placental samples from all selected regions, except for a small town with a lower traffic density. The findings may implicate traffic-related environmental lead pollution, rather than industrial sources. The highest concentration of cadmium was shown to be in the samples collected from the region with the highest proportion of smoking mothers (including passive smoking). Simultaneously, the placental samples were processed histochemically to determine the location of lead in the placental tissue (using light microscopy). The degree of placental metal contamination was done semiquantitatively, and the difference between the rural and industrial region was statistically compared. Parallel quantitative AAS analyses and semiquantitative histochemical lead analyses of human placental samples revealed analogous results regarding the level of placental contamination with metals. (orig.) (orig.) With 4 figs., 12 refs.

Content of heavy metals in gleyic chernozem of Srem loess terrace under alfalfa

Directory of Open Access Journals (Sweden)

Jakšić Snežana

2012-01-01

Full Text Available Production of high-quality forage from alfalfa is influenced not only by the presence of nutrients, but also by the absence of harmful elements, such as heavy metals. The examination of the total heavy metals content (Ni, Cr, Pb and As in gleyic chernozem soil of Srem loess terrace in Hrtkovci, under alfalfa (Medicago sativa L. were carried out in 2011 in order to determine suitability for the production of safe forage. It total content of Pb, As and Crwas below the maximum permitted concentrations. The content of As, Cr and Ni was higher in the surface layer, unlike Pb, whose content was higher in the deeper layers of soil. A significant positive correlation was found between the total content of Ni, Cr and As. An increased concentration of Ni was found, which was above the maximum permitted concentration. It is necessary to further control its content and accessibility examination and extraction from plants, to prevent its entry into the food chain and provide safe food.

The Effect of Organism Size on the Content of Certain Trace Metals in Marine Zooplancton

International Nuclear Information System (INIS)

Fowler, S.W.

1976-01-01

Individual species of euphausiids and pelagic shrimp, collected at the same time and place, were sorted into different size groups and analyzed for several biologically important trace metals by atomic absorption spectrophotometry and neutron activation. Other specimens from these samples were dissected into gross anatomical parts and analyzed in the same way. Molts collected from zooplankters maintained live in the laboratory were also analyzed for metals. Results for the different size-group experiments showed that in general the concentrations of zinc, iron, and manganese were inversely correlated with dry body weight. Depending upon the crustacean species, metal concentrations in smaller individuals ranged from 1.2 to 4.1 times greater than those in larger individuals of the same species. Copper concentration on the other hand, tended to be a direct function of dry weight. Concentrations of zinc, iron, and manganese were generally higher in molts and dissected exoskeletons than in muscle tissue, however, the opposite was true for copper. The amount of material shed by euphausiids in molting ranged from 4.7 to 10.9% of dry body weight with smaller animals tending to lose a greater percentage of body weight than the larger specimens. These molts, in which ash accounted for about 40-50% of the dry weight, contained 15-20, 19-45, 28-40, and 15% of the total body zinc, iron, cobalt and manganese, respectively. Only 5% of the total body copper content was associated with the molt. In addition, molts from smaller crustaceans had higher concentrations of zinc and iron than those from larger species. With the exception of copper, it appears that a relatively large fraction of the animal's metal content is associated with the older inert chitin, indicating that much of the trace metal measured in small planktonic crustaceans is merely sorbed to the surface and is not physiologically necessary. In an ecological sense, the rapid molting frequency of these Crustacea

EVALUATING SYSTEMATIC DEPENDENCIES OF TYPE Ia SUPERNOVAE: THE INFLUENCE OF PROGENITOR 22Ne CONTENT ON DYNAMICS

International Nuclear Information System (INIS)

Townsley, Dean M.; Jackson, Aaron P.; Calder, Alan C.; Chamulak, David A.; Brown, Edward F.; Timmes, F. X.

2009-01-01

We present a theoretical framework for formal study of systematic effects in supernovae Type Ia (SNe Ia) that utilizes two-dimensional simulations to implement a form of the deflagration-detonation transition (DDT) explosion scenario. The framework is developed from a randomized initial condition that leads to a sample of simulated SNe Ia whose 56 Ni masses have a similar average and range to those observed, and have many other modestly realistic features such as the velocity extent of intermediate-mass elements. The intended purpose is to enable statistically well defined studies of both physical and theoretical parameters of the SNe Ia explosion simulation. We present here a thorough description of the outcome of the SNe Ia explosions produced by our current simulations. A first application of this framework is utilized to study the dependence of the SNe Ia on the 22 Ne content, which is known to be directly influenced by the progenitor stellar population's metallicity. Our study is very specifically tailored to measure how the 22 Ne content influences the competition between the rise of plumes of burned material and the expansion of the star before these plumes reach DDT conditions. This influence arises from the dependence of the energy release, progenitor structure, and laminar flame speed on 22 Ne content. For this study, we explore these three effects for a fixed carbon content and DDT density. By setting the density at which nucleosynthesis takes place during the detonation phase of the explosion, the competition between plume rise and stellar expansion controls the amount of material in nuclear statistical equilibrium (NSE) and therefore 56 Ni produced. Of particular interest is how this influence of 22 Ne content compares to the direct modification of the 56 Ni mass via the inherent neutron excess as discussed by Timmes et al. Although the outcome following from any particular ignition condition can change dramatically with 22 Ne content, with a sample of

Temperature-dependent liquid metal flowrate control device

International Nuclear Information System (INIS)

Carlson, R.D.

1978-01-01

A temperature-dependent liquid metal flowrate control device includes a magnet and a ferromagnetic member defining therebetween a flow path for liquid metal, the ferromagnetic member being formed of a material having a curie temperature at which a change in the flow rate of the liquid metal is desired. According to the preferred embodiment the magnet is a cylindrical rod magnet axially disposed within a cylindrical member formed of a curie material and having iron pole pieces at the ends. A cylindrical iron shunt and a thin wall stainless steel barrier are disposed in the annulus between magnet and curie material. Below the curie temperature flow between steel barrier and curie material is impeded and above the curie temperature flow impedance is reduced

Effect of heavy metals on growth and heavy metal content of Allium porrum L. and Pisum sativum L

Energy Technology Data Exchange (ETDEWEB)

Gruenhage, L.; Jaeger, H.J.

1985-01-01

The effects of cadmium, lead, zinc and copper, singly and in combination, on yield, heavy metal content and the mineral composition of Allium porrum L. and Pisum sativum L. have been investigated. The Cd, Pb, Zn and Cu concentrations of shoots and roots of Allium porrum increased with increasing heavy metal contamination of soil. However, no visible symptoms of heavy metal toxicity were recognized. The dry matter production was reduced as a function of heavy metal concentration and combination. The mechanisms of combinations were mostly synergistic. The correlation between pollutant contents (nmol/shoot) and yield was higher than the correlation between heavy metal concentrations of soil or shoots (ppm) and yield. Results of regression analyses showed that the inhibition of copper translocation caused by Cd, Pb and Zn was responsible for the yield depressions. The antagonism between Cd and N-deficiency showed that the level of N-supply was without negative effects on yield depressions of Pisum sativum caused by Cd. In contrast to this, the N-form played an important role in Cd-toxicity as the synergism between Cd and NH4 illustrated. K-deficiency as well as acidic nutrient solution (pH=4) diminished the root/shoot-barrier for Cd and therefore Cd-translocation from roots to shoots increased. Concerning calcium, magnesium and iron the decrease of ion uptake caused by Cd was statistically significant higher than yield depression.

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

International Nuclear Information System (INIS)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte

2016-01-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples

Evaluation of site-specific factors influencing heavy metal contents in the topsoil of vegetated infiltration swales

Energy Technology Data Exchange (ETDEWEB)

Horstmeyer, Nils; Huber, Maximilian; Drewes, Jörg E.; Helmreich, Brigitte, E-mail: b.helmreich@tum.de

2016-08-01

Stormwater runoff of traffic areas is usually polluted by organic and inorganic substances and must be treated prior to discharge into groundwater. One widely used treatment method is infiltrating the runoff over the topsoil of vegetated swales. The aim of this study was to evaluate the factors influencing the heavy metal contents in such topsoil layers of vegetated infiltration swales near highways, roads, and parking lots. In total, 262 topsoil samples were taken from 35 sampling sites, which varied in age, traffic volume, road design, driving style, and site-specific conditions. In the evaluation of all soil samples, the median heavy metal values of cadmium, chromium, copper, lead, and zinc were yielding 0.36 (mean: 1.21) mg/kg DM, 37.0 (mean: 44.5) mg/kg DM, 28.0 (mean: 61.5) mg/kg DM, 27.0 (mean: 71.9) mg/kg DM, and 120 (mean: 257) mg/kg DM, respectively. The main purpose was to evaluate the site-specific data (i.e., surrounding land use characteristics, traffic area site data, and operational characteristics). In general, heavy metal contents increased with increasing traffic volumes. However, other factors also had a notable impact. Factors such as road design (e.g., curves, crossings, and roundabouts) and grade of congestion significantly influenced the heavy metal contents. High heavy metal contents were detected for stop-and-go areas, roundabouts, crossings, and sites with traffic lights, signs, and guardrails. Findings of this study can be used to identify highly polluted traffic areas and to verify or improve standards regarding the treatment of runoff from traffic areas. - Highlights: • Correlation of contents with traffic volume, road design, and stop-and-go traffic • Increased heavy metal contents at stop-and-go sites, roundabouts, and crossings • Different soil contents and behavior of cadmium, chromium, copper, lead, and zinc • Identification of factors influencing the variability of zinc in topsoil samples.

The effect of carbon content on mechanical properties, failure and corrosion resistance of deposited chromium metal

Directory of Open Access Journals (Sweden)

Леонід Кімович Лещинськiй

2017-06-01

Full Text Available It has been shown that if choosing a metal composition for surfacing rolls and rollers of continuous casting machines, both the carbon impact on the mechanical and functional properties and the critical values of the chromium concentration, which determine the corrosion resistance of the metal with regard to electrochemical corrosion theory, should be considered as well. The paper studied the effect of chromium and carbon steel the X5-X12 type on the structure, technological strength, mechanical properties, fracturing resistance and corrosion resistance of the weld metal. The composition of chromium tool steels (deposited metal (X5-used for the rolls of hot rolling mills and (X12-used for continuous casting machines rollers correspond to these values. The impact of carbon on the properties of the deposited metal containing chromium was considered by comparing the data for both types of the deposited metal. It was found that for both types of the deposited metal (X5 and X12, the limiting value of the carbon content, providing an optimal combination of strength, ductility, failure resistance is the same. If the carbon content is more than the limiting value – (0,25% the technological strength and failure resistance of the deposited metal significantly reduce. With increasing carbon content from 0,18 to 0,25% the martensite structure has a mixed morphology – lath and plate. The strength and toughness of the deposited metal grow. Of particular interest is simultaneous increase in the specific work of failure resulted from crack inhibition at the boundary with far less solid and more ductile ferrite. As for the 5% chromium metal, the X12 type composition with 0,25% C, is borderline. With a further increase in the carbon content of the metal both ductility and failure resistance sharply decrease and with 0,40% C the growth rate of fatigue crack increases by almost 1,5 times

Estimation of trace metal contents in locally-baked breads

International Nuclear Information System (INIS)

Khalid, N.; Rehman, S.

2013-01-01

In order to establish base line levels, estimation of some essential trace metals (Cu, Fe, Mn and Zn) has been conducted in four brands of fifteen locally baked breads of Rawalpindi /Islamabad area employing Atomic Absorption Spectrophotometry (AAS). The samples were digested in a mixture of nitric acid and perchloric acid and the analysis was done with air-acetylene flame. The reliability of the procedure employed was verify by analyzing Standard Reference Material, i.e., wheat flour (NBS-SRM-1567) for its Cu, Fe, Mn and Zn contents which were in good agreement with the certified values. The results revealed that brown breads contained higher amount of Fe 177.3 micro g g/sup -1/and Zn 19.27 micro g g/sup -1/while levels of Cu 21.90 micro g g/-sup 1/was found higher in the samples of plain bread. The determined metal concentrations in the bread samples were compared with the reported values for other countries. The effect of kneading/baking/slicing processes on the concentration levels of these metals was also studied. The daily intake of these metals through this source was calculated and compared with the recommended dietary allowance. (author)

Antioxidant Capacity and Metal Content of Physalis Peruviana L. Fruit Sold in Markets

Directory of Open Access Journals (Sweden)

Ayse Eken

2014-12-01

Full Text Available Aim: The dietary intake of medicinal food with antioxidant activity and required amounts of trace elements is important to pursue good healthy life. In our study, we aimed to determine the antioxidant capacity and metal content of goldenberry (Physalis peruviana L. fruit sold in markets in Kayseri. Material and Method: The antioxidant capacity of P. peruviana fruit was determined by the 2,2-diphenyl-1-picrylhydrazyl (DPPH free radical scavenging assay. The DPPH radical scavenger capacity of the methanol extract of fruit was compared with known antioxidants such as ascorbic acid, gallic acid, and butylated hydroxytoluene (BHT as references. The metal content of P. peruviana fruit was measured by using atomic absorption spectrometer (AAS. Results: The fruit of P. peruviana was found to possess DPPH free radical scavenging activity but the antioxidant capacity was lower than the standard substances. Inhibitory concentration 50% (IC50 values of P. peruviana, ascorbic acid, gallic acid, and BHT were determined as 32 mg/ml, 3.8 mg/ml, 3.51 mg/ml, and 1.21 mg/ml, respectively. As a result of the analysis by AAS, it was observed that P. peruviana fruit contented plentiful trace elements and the content of heavy metal was small amount or not detected. Discussion: These observations suggest that the fruit of P. peruviana has a potential source of antioxidant and trace elements of natural origin.

Assessment of arsenic and heavy metal contents in cockles (Anadara granosa) using multivariate statistical techniques

International Nuclear Information System (INIS)

Abbas Alkarkhi, F.M.; Ismail, Norli; Easa, Azhar Mat

2008-01-01

Cockles (Anadara granosa) sample obtained from two rivers in the Penang State of Malaysia were analyzed for the content of arsenic (As) and heavy metals (Cr, Cd, Zn, Cu, Pb, and Hg) using a graphite flame atomic absorption spectrometer (GF-AAS) for Cr, Cd, Zn, Cu, Pb, As and cold vapor atomic absorption spectrometer (CV-AAS) for Hg. The two locations of interest with 20 sampling points of each location were Kuala Juru (Juru River) and Bukit Tambun (Jejawi River). Multivariate statistical techniques such as multivariate analysis of variance (MANOVA) and discriminant analysis (DA) were applied for analyzing the data. MANOVA showed a strong significant difference between the two rivers in term of As and heavy metals contents in cockles. DA gave the best result to identify the relative contribution for all parameters in discriminating (distinguishing) the two rivers. It provided an important data reduction as it used only two parameters (Zn and Cd) affording more than 72% correct assignations. Results indicated that the two rivers were different in terms of As and heavy metal contents in cockle, and the major difference was due to the contribution of Zn and Cd. A positive correlation was found between discriminate functions (DF) and Zn, Cd and Cr, whereas negative correlation was exhibited with other heavy metals. Therefore, DA allowed a reduction in the dimensionality of the data set, delineating a few indicator parameters responsible for large variations in heavy metals and arsenic content. Taking into account of these results, it can be suggested that a continuous monitoring of As and heavy metals in cockles be performed in these two rivers

THE STUDY OF HEAVY METALS CONTENT IN THE CATCHMENT AREA OF THE BIEBRZA RIVER AND THREE TRIBUTARIES

Directory of Open Access Journals (Sweden)

Zuzanna Kazimierowicz

2014-11-01

Full Text Available Sediment samples were taken in 11 measuring points of the Biebrza River and determined the contents of six metals (Cu, Cr, Co, Ni, Cd and Zn. Arithmetic mean, median and standard deviation were calculated. The sources of heavy metals in bottom sediments are: pollutants of fieldsand meadows (admixtures of plant protection products and fertilizers, discharges of domestic sewage and municipal from local wastewater treatment plants, wastewater di-scharges from rural buildings and pollutions of anthropogenic origin. Research of pollution of bottom sediments with heavy metals are needed tool for monitoring the aquatic environ-ment. Continuous monitoring metal content of the sediments will counteract the effects of the threat of biological life in the water reservoir, which may occur in the case of notorious exceeded permissible content of harmful substances.

Correlation between heavy metal contents and antioxidants in medicinal plants grown in mining areas

International Nuclear Information System (INIS)

Maharia, R.; Dutta, R.K.; Acharya, R.; Reddy, A.V.R.

2010-01-01

Full texts: Medicinal plants are widely used as alternate therapeutic agents for various diseases. Three medicinal plants grown in copper mining regions of Khetri in Rajasthan was analyzed for heavy metal contents by instrumental neutron activation analysis. The copper levels were found to be two to three folds higher in these plant leaves as compared to the reported copper levels in the medicinal plants grown in environmentally friendly regions. In our previous study on heavy metals in soil and medicinal plant of Khetri region we have shown bioaccumulation of Cu in the medicinal plants. In addition, the levels of Cr, Fe and Zn were also higher. Antioxidant properties of medicinal plants are one of their major therapeutic functionalities. The role of elevated levels of heavy metals in the medicinal plants was studied with respect to their antioxidant properties. Standard procedures were used for measuring total phenols, flavanoids and DPPH assay of these medicinal plants which were correlated with the heavy metals contents of these plants

Content dependent selection of image enhancement parameters for mobile displays

Science.gov (United States)

Lee, Yoon-Gyoo; Kang, Yoo-Jin; Kim, Han-Eol; Kim, Ka-Hee; Kim, Choon-Woo

2011-01-01

Mobile devices such as cellular phones and portable multimedia player with capability of playing terrestrial digital multimedia broadcasting (T-DMB) contents have been introduced into consumer market. In this paper, content dependent image quality enhancement method for sharpness and colorfulness and noise reduction is presented to improve perceived image quality on mobile displays. Human visual experiments are performed to analyze viewers' preference. Relationship between the objective measures and the optimal values of image control parameters are modeled by simple lookup tables based on the results of human visual experiments. Content dependent values of image control parameters are determined based on the calculated measures and predetermined lookup tables. Experimental results indicate that dynamic selection of image control parameters yields better image quality.

FeNbB bulk metallic glass with high boron content

Energy Technology Data Exchange (ETDEWEB)

Stoica, M.; Das, Jayanta; Eckert, Juergen [IFW Dresden, Institute for Complex Materials, P.O. Box 270016, D-01171 Dresden (Germany); Hajlaoui, Khalil; Yavari, Alain Reza [LTPCM-CNRS, I.N.P. Grenoble, 1130 Rue de la Piscine, BP 75, F-38402 University Campus (France)

2007-07-01

Fe-based alloys able to form magnetic bulk metallic glasses (BMGs) are of the type transition metal - metalloid and often contain 5 or more elements. Usually, the metalloid content is around 20 atomic %. Very recently, the Fe{sub 66}Nb{sub 4}B{sub 30} alloy was found to be able to form BMG by copper mold casting technique, despite its high metalloid content. Several composition with boron contents around 30 at. % or even higher were calculated since 1993 as possible compositions of the remaining amorphous matrix after the first stage of nanocrystallization of Finemet-type Fe{sub 77}Si{sub 14}B{sub 9} glassy ribbons with 0.5 to 1 atomic % Cu and a few percent Nb addition. Melt-spun ribbons of all calculated compositions were found to be glassy. The composition of the ternary Fe-based BMG investigated in the present study resulted as an optimization of all possibilities. The alloy is ferromagnetic with glass transition temperature T{sub g}=845 K, crystallisation temperature T{sub x}=876 K, liquidus temperature T{sub liq}=1451 K and mechanical strength of 4 GPa. The coercivity of as-cast samples is very low, around 1.5 A/m. The present contribution aims at discussing the thermal stability, mechanical and magnetic properties of the Fe{sub 66}Nb{sub 4}B{sub 30} BMG.

The study of heavy metals and microbial content in beef bowel and red meat

International Nuclear Information System (INIS)

Harsojo; Darsono

2013-01-01

Indonesia's population has increased every year so the need for food increased, especially the availability of nutritious foods such as red meat. Red meat is one of the foods that contain sufficient elements of protein, but it was likely to contain heavy metals and bacterial contamination that has met the threshold standards. On the otherhand, beef bowels are very popular among Indonesian consumers, but many heavy metlas could accumulated into the bowels. The purpose of this research are to study the content of heavy metals and bacterial contamination on beef bowel from some places of slaughtering houses and some red meats from the market in Jakarta. The beef bowels are lung, tripe, intestine and liver while the red meats were veal and tender loin. Parameter of heavy metals measured are As, Cd and Hg, while for the initial bacterial contamination are total number of aerobic bacteria, total amount of coliform, Escherichia coli, Staphylococcus sp and Salmonella contamination. The heavy metals were analyzed using Neutron Activation Analysis, and for the total number of bacteria is using Total Plate Count. Result of research shows the As content in lung and tripe as well as the mercuric content in bowel has exceeded in the normal level such as 1.0 and 0.03 ppm, respectively. On the other hand, no heavy metals were detected in all red meats. The total microbes in beef bowel have exceeded allowable limit (1.0 x 10 6 cfu/g). No Salmonella was detected in all beef bowels and red meats observed. Nuclear technique are very helpful analysis of the heavy metas content in bowel dan red meats beef. The cleanliness slaughtering house of animals are remarkably ascertaining the quality of the beef bowel and red meats who will be sent. (author)

Effects of nitrogen enrichment on heavy metals content of cattle ...

African Journals Online (AJOL)

The research was carried out at John Ker Nigeria Organo-Mineral Company site at Ikot Ekpene, Akwa Ibom State, Nigeria, to investigate the effect of nitrogen enrichment on contents of heavy metals in cattle dung/poultry manure compost and the growth of maize. Cattle dung was mixed with poultry manure in the ratio of 3:1 ...

Effect of the edaphic factors and metal content in soil on the diversity of Trichoderma spp.

Science.gov (United States)

Racić, Gordana; Körmöczi, Péter; Kredics, László; Raičević, Vera; Mutavdžić, Beba; Vrvić, Miroslav M; Panković, Dejana

2017-02-01

Influence of edaphic factors and metal content on diversity of Trichoderma species at 14 different soil sampling locations, on two depths, was examined. Forty-one Trichoderma isolates from 14 sampling sites were determined as nine species based on their internal transcribed spacer (ITS) sequences. Our results indicate that weakly alkaline soils are rich sources of Trichoderma strains. Also, higher contents of available K and P are connected with higher Trichoderma diversity. Increased metal content in soil was not inhibiting factor for Trichoderma species occurrence. Relationship between these factors was confirmed by locally weighted sequential smoothing (LOESS) nonparametric smoothing analysis. Trichoderma strain (Szeged Microbiology Collection (SZMC) 22669) from soil with concentrations of Cr and Ni above remediation values should be tested for its potential for bioremediation of these metals in polluted soils.

Trace metal content in aspirin and women's cosmetics via proton induced x-ray emission (PIXE)

International Nuclear Information System (INIS)

Hichwa, B.P.; Pun, D.D.; Wang, D.

1981-01-01

A multielemental analysis to determine the trace metal content of generic and name-brand aspirins and name-brand lipsticks was done via proton induced x-ray (PIXE) measurements. The Hope College PIXE system is described as well as the target preparation methods. The trace metal content of twelve brands of aspirin and aspirin substitutes and fourteen brands of lipstick are reported. Detection limits for most elements are in the range of 100 parts per billion (ppb) to 10 parts per million

The influence of pH and organic matter content in paddy soil on heavy metal availability and their uptake by rice plants

Energy Technology Data Exchange (ETDEWEB)

Zeng Fanrong; Ali Shafaqat; Zhang Haitao [Department of Agronomy, College of Agriculture and Biotechnology, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China); Ouyang Younan [China National Rice Research Institute, Fuyang 310041 (China); Qiu Boyin; Wu Feibo [Department of Agronomy, College of Agriculture and Biotechnology, Huajiachi Campus, Zhejiang University, Hangzhou 310029 (China); Zhang Guoping, E-mail: zhanggp@zju.edu.c [China National Rice Research Institute, Fuyang 310041 (China)

2011-01-15

The experiments were done to investigate the effect of soil pH and organic matter content on EDTA-extractable heavy metal contents in soils and heavy metal concentrations in rice straw and grains. EDTA-extractable Cr contents in soils and concentrations in rice tissues were negatively correlated with soil pH, but positively correlated with organic matter content. The combination of soil pH and organic matter content would produce the more precise regression models for estimation of EDTA-Cu, Pb and Zn contents in soils, demonstrating the distinct effect of the two factors on the availability of these heavy metals in soils. Soil pH greatly affected heavy metal concentrations in rice plants. Furthermore, inclusion of other soil properties in the stepwise regression analysis improved the regression models for predicting straw Fe and grain Zn concentrations, indicating that other soil properties should be taken into consideration for precise predicting of heavy metal concentrations in rice plants. - Soil pH and organic matter content significantly affect heavy metal availability and accumulation in rice plants.

Study on the prediction of soil heavy metal elements content based on visible near-infrared spectroscopy

Science.gov (United States)

Liu, Jinbao; Zhang, Yang; Wang, Huanyuan; Du, Yichun

2018-06-01

The estimation of soils heavy metal content can reflect the impending surroundings of surface, which lays theoretical foundation for using covered vegetation to monitor environment and investigate resource. In this study, the contents of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb in 44 soil samples were collected from Fufeng County, Yangling County and Wugong County, Shaanxi Province and were used as data sources. ASD FieldSpec HR (350-2500 nm), and then the NOR, MSC and SNV of the reflectance were pretreated, the first deviation, second deviation and reflectance reciprocal logarithmic transformation were carried out. The optimal spectroscopy estimation model of nine heavy metal elements of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb was established by regression method. Comparing the diffuse reflectance characteristics of different heavy metal contents and the effect of different pretreatment methods on the establishment of soil heavy metal spectral inversion model. The results of chemical analysis show that there was a serious Hg pollution in the study area, and the Cd content was close to the critical value. The results show that: (1) NOR, MSC and SNV were adopted for the acquisition of visible near-infrared. Combining differential transformation can improve the information of heavy metal elements in the soil, and use the correlation band energy Significantly improve the stability and predictability of the model. (2) The modeling accuracy of the optimal model of nine heavy metal spectra of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb by PLSR method were 0.70, 0.79, 0.69, 0.81, 0.86, 0.58, 0.55, 0.99, 0.62. (3) The optimal estimation model of different elements using different treatment methods has better stability and higher precision, and can realize the rapid prediction of nine kinds of heavy metal elements in this region.

Monitoring Heavy Metal Contents with Sphagnum Junghuhnianum Moss Bags in Relation to Traffic Volume in Wuxi, China.

Science.gov (United States)

Hu, Rong; Yan, Yun; Zhou, Xiaoli; Wang, Yanan; Fang, Yanming

2018-02-22

Despite its small size, a moss bag can reveal the different temporal and spatial deposition patterns of pollutants at a particular site; therefore, researchers can use moss bags to determine pollution sources and to put forward strategies for pollution control. Although the use of moss bags to monitor atmospheric pollution has been widely reported in Europe, there are few such empirical studies in China. Thus, in this study, bags containing the moss Sphagnum junghuhnianum were used to assess the concentrations of heavy metals (chromium (Cr), copper (Cu), lead (Pb), vanadium (V), and zinc (Zn)) at five sampling sites (four roads and a forest park) during the summer and winter of 2012. According to the relative accumulation factor (RAF) and contamination factor (CF) results, pollution in winter was heavier than that in summer, and Cr was found to be the most contaminating, having the highest mean CF. There was a significant positive correlation ( p heavy metals (Cr, Cu, and V) in winter, whereas a significant positive correlation ( p heavy metal elements (Cr, Pb, V, and Zn) in summer, indicating a close relationship between heavy metal contents and traffic volume. Although there was substantial variation in the concentrations of the five heavy metals in the moss bags, significant correlations between heavy metals suggested that the contaminants originated from a common source, namely vehicle emissions. The results demonstrated that the four roads were subject to different degrees of pollution depending on the volume of traffic using each road. Therefore, the results of this study suggest that traffic volume is a major reason for heavy metal pollution.

Assessment and genetic analysis of heavy metal content in rice grain using an Oryza sativa × O. rufipogon backcross inbred line population.

Science.gov (United States)

Huang, De-Run; Fan, Ye-Yang; Hu, Biao-Lin; Xiao, Ye-Qing; Chen, Da-Zhou; Zhuang, Jie-Yun

2018-03-01

Heavy metal accumulation in rice is a growing concern for public health. Backcross inbred lines derived from an interspecific cross of Oryza sativa × O. rufipogon were grown in two distinct ecological locations (Hangzhou and Lingshui, China). The objective of this study was to characterise the contents of heavy metal in rice grains, and to identify quantitative trait loci (QTLs) for heavy metal contents. The contents of Ni, As, Pb, Cr and Hg in milled rice showed a significant decline as compared with those in brown rice, whereas the content of Cd showed little change. The concentration of heavy metal in rice grain varied greatly between the two environments. A total of 24 QTLs responsible for heavy metal contents were detected, including two for both the brown and milled rice, 13 for brown rice only, and nine for milled rice only. All the QTLs except two had the enhancing alleles derived from O. rufipogon. Sixteen QTLs were clustered in six chromosomal regions. Environmental variation plays an important role in the heavy metal contents in rice grain. QTLs detected in this study might be useful for breeding rice varieties with low heavy metal content. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Comparing heavy metal contents in crops receiving mineral fertilisers and animal manure

DEFF Research Database (Denmark)

Christensen, Bent Tolstrup; Elsgaard, Lars

2014-01-01

Spring barley (grain, straw), grass-clover (two cuts), winter wheat (grain, straw) and silage maize grown in the Askov long-term experiment with different levels (0, ½, 1, 1½, 2) of mineral fertiliser (NPK) and animal manure (AM) had concentrations of As, Pb, Cd and Hg below the EC maximum permis...... of NPK and AM does not pose a threat in terms of feed quality. However, the long-term accumulation of heavy metals added with mineral fertilisers and animal manure is essentially irreversible and may threaten soil quality....... in the analysed metal contents between crops grown with NPK and AM. Crop contents of uranium and thallium were below the analytical detection limits regardless of nutrient source and addition rate. Thus in a farming context similar to that of the Askov experiment, the long-term application of standard rates...

Temperature dependence of critical resolved shear stress for cubic metals

International Nuclear Information System (INIS)

Rashid, H.; Fazal-e-Aleem; Ali, M.

1996-01-01

The experimental measurements for critical resolved shear stress of various BCC and FCC metals have been explained by using Radiation Model. The temperature dependence of CRSS for different cubic metals is found to the first approximation, to upon the type of the crystal. A good agreement between experimental observations and predictions of the Radiation Model is found. (author)

Micro-EDXRF surface analyses of a bronze spear head: Lead content in metal and corrosion layers

International Nuclear Information System (INIS)

Figueiredo, E.; Valerio, P.; Araujo, M.F.; Senna-Martinez, J.C.

2007-01-01

A bronze spear head from Central Portugal dated to Late Bronze Age has been analyzed by non-destructive micro-EDXRF in the metal surface and corrosion layers. The artifact had previously been analyzed using a conventional EDXRF spectrometer having a larger incident beam. The quantification of the micro-EDXRF analyses showed that lead content in corrosion layers can reach values up to four times higher than the content determined in the metal surface. Results obtained with the higher energy incident beam from the EDXRF equipment, although referring mainly to the corrosion layers, seem to suffer some influence from the surface composition of the metallic alloy

The dependence of human reliability upon task information content

International Nuclear Information System (INIS)

Hermanson, E.M.; Golay, M.W.

1994-09-01

The role of human error in safety mishaps is an important factor in system design. As systems become increasingly complex the capacity of the human to deal with the added complexity is diminished. It is therefore crucial to understand the relationship between system complexity and human reliability so that systems may be built in such a way as to minimize human error. One way of understanding this relationship is to quantify system complexity and then measure the human reaction in response to situations of varying complexity. The quantification of system complexity may be performed by determining the information content present in the tasks that the human must execute. The purpose of this work is therefore to build and perform a consistent experiment which will determine the extent to which human reliability depends upon task information content. Two main conclusions may be drawn from this work. The first is that human reliability depends upon task information content. Specifically, as the information content contained in a task increases, the capacity of a human to deal successfully with the task decreases monotonically. Here the definition of total success is the ability to complete the task at hand fully and correctly. Furthermore, there exists a value of information content below which a human can deal with the task successfully, but above which the success of an individual decreases monotonically with increasing information. These ideas should be generalizable to any model where system complexity can be clearly and consistently defined

The dose-dependent influence of zinc and cadmium contamination of soil on their uptake and glucosinolate content in white cabbage (Brassica oleracea var. capitata f. alba).

Science.gov (United States)

Kusznierewicz, Barbara; Bączek-Kwinta, Renata; Bartoszek, Agnieszka; Piekarska, Anna; Huk, Anna; Manikowska, Anna; Antonkiewicz, Jacek; Namieśnik, Jacek; Konieczka, Piotr

2012-11-01

The relationship between the ability to accumulate heavy metals (represented by Cd and Zn) and to synthesize bioactive compounds (represented by glucosinolates [GLS]) was investigated in two cabbage cultivars. Plants were grown in the greenhouse of a phytotron under controlled conditions in soils spiked with two different Zn or Cd concentrations. The measurements of Cd and Zn contents in soil and cabbage (leaf) samples were performed by atomic absorption spectroscopy, whereas GLS levels in cabbage were determined by high-performance liquid chromatography. The ranges of metal contents in soil were 80 to 450 mg/kg dry weight for Zn and 0.3 to 30 mg/kg dry weight for Cd, whereas the levels of accumulated Zn and Cd in cabbage amounted to 15 to 130 and 0.02 to 3 mg/kg dry weight, respectively. After initial symptoms of toxicity, during a later stage of growth, the plants exhibited very good tolerance to both metals. Enhanced biosynthesis of GLS was observed in a dose-dependent manner following exposure to the heavy metals. The GLS content in Zn-exposed cabbage rose from 3.2 to 12 µmol/g dry weight, and the corresponding values for Cd-treated plants were 3.5 to 10 µmol/g dry weight. Thus, the increased soil contamination by metals caused greater accumulation in cabbage, as well as stimulation of GLS biosynthesis. The results obtained point to the high phytoremediation and biofumigation potential of white cabbage. Copyright © 2012 SETAC.

[Seasonal variations of metal contents (Cd, Cu, Fe, Mn and Zn) in seaweed Ulva lactuca from the coast of El Jadida city (Morocco)].

Science.gov (United States)

Kaimoussi, Aziz; Mouzdahir, Abdelkrim; Saih, Abdelkbir

2004-04-01

The quality of El Jadida Atlantic coastal water was monitored from April 1998 to March 1999 by measuring hydrological parameters (dissolved oxygen, suspended particulate matter, phosphates and nitrites) and using the seaweed Ulva lactuca as a quantitative bio-indicator of cadmium, copper, iron, manganese and zinc contamination. Metal content in seaweeds, collected every month from four stations characterized by the discharge of urban and industrial waste water, showed significant variations depending on the station and sampling period. However, the seaweed of El Jadida exhibited generally lower contents compared to those of similar species from other geographical areas.

FP corrosion dependence on carbon and chromium content in Fe-Cr steel

International Nuclear Information System (INIS)

Sasaki, Koei; Tanigaki, Takanori; Fukumoto, Ken-ichi; Uno, Masayoshi

2015-01-01

In an attempt to investigate Cs or Cs-Te corrosion dependence on chromium or carbon content in Fe-Cr steel, cesium and Cs-Te corrosion test were performed to three specimens, Fe-9Cr-0C, Fe-9Cr-0.14C and Fe-13Cr-0.14C, for 100 hours at 973K in simulated high burn-up fuel pin environment. Cesium corrosion depth has no dependence on chromium or carbon content in Fe-Cr steel. Cs-Te corrosion was appeared in only Fe-13Cr-0.14C which has chromium carbides ranged along grain boundary. Appearance of the Cs-Te corrosion was determined by distribution or arrangement of chromium carbides which depends on chromium and carbon content. (author)

Microbial and trace metal content of well water in three rural ...

African Journals Online (AJOL)

Microbial and trace metal content of well water in three rural communities in Bauchi State, Nigeria*. E Ikeh, PN Durfee, RH Glew, R Amato, FJ Frost, DJ Vanderjagt. Abstract. No Abstract. Nigerian Journal of Health and Biomedical Sciences Vol. 5 (2) 2006: 66-70. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT

Trace metals content (contaminants) as initial indicator in the quality of heat treated palm oil whole extract

Energy Technology Data Exchange (ETDEWEB)

Mohd Fauzi, Noor Akhmazillah bt [Chemical and Bioprocess Department, Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor (Malaysia); Sarmidi, Mohd Roji [Chemical Engineering Pilot Plant, Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor (Malaysia)

2011-07-01

An investigation was carried out on the effect of different sterilization time on the trace metals concentration of palm oil whole extract. Palm fruits were collected, cleaned and sterilized for 0, 20, 40 and 60 minutes. The kernels were then stripped from the sterilized fruits to get the pulp and later the pulp was pressed using small scale expeller. The resulting puree was centrifuge at 4000 rpm for 20 minutes. The palm oil whole extract were then collected and trace metals analysis was conducted using Inductively Couple Plasma-Mass Spectrometry (ICP-MS). The result showed that the highest yield was obtained at 40 minutes of sterilization with 19.9 {+-} 0.21 % (w/w). There was no significant different (p < 0.5) in total trace metals content between the degrees of the heat treatment. Na+ was found as the highest trace metals content in the extract with mean concentration ranging from 1.05 {+-} 0.03 ppm to 2.36 {+-} 0.01 ppm. 40 minutes of heating time was predicted to have good oil quality due to higher content in trace metals that inhibit the lipase enzyme activity.

The effect of bottom sediment supplement on heavy metals content in plants (Zea mays and soil

Directory of Open Access Journals (Sweden)

Baran A.

2013-04-01

Full Text Available Important aspect of bottom sediments is the problem of their management or disposal after their extraction from the bottom of rivers, dam reservoirs, ports, channels or ponds. The research aimed at an assessment of potential environmental management of bottom sediment used as an admixture to light soil basing on its effect on contents of heavy metals in plants and soil. The research was conducted on light soil with granulometric structure of weakly loamy sand. The bottom sediment was added to light soil in the amount of 0 (control 5, 10, 30 i 50%. The test plant was maize (Zea mays, “Bora” c.v. The sediment applied in the presented research revealed high share of silt and clay fractions, alkaline pH and low contents of heavy metals, therefore it may be used as an admixture to the above mentioned soils to improve their productivity. The applied bottom sediment to the soil affected a decreased in Zn, Cd and Pb content in maize in comparison with the treatment without the deposit whereas increased content of Cu, Cr and Ni. No exceeded permissible content of heavy metals concerning plant assessment in view of their forage usability were registered in maize biomass.

Metal ion-dependent DNAzymes and their applications as biosensors.

Science.gov (United States)

Lan, Tian; Lu, Yi

2012-01-01

Long considered to serve solely as the genetic information carrier, DNA has been shown in 1994 to be able to act as DNA catalysts capable of catalyzing a trans-esterification reaction similar to the action of ribozymes and protein enzymes. Although not yet found in nature, numerous DNAzymes have been isolated through in vitro selection for catalyzing many different types of reactions in the presence of different metal ions and thus become a new class of metalloenzymes. What remains unclear is how DNA can carry out catalysis with simpler building blocks and fewer functional groups than ribozymes and protein enzymes and how DNA can bind metal ions specifically to perform these functions. In the past two decades, many biochemical and biophysical studies have been carried out on DNAzymes, especially RNA-cleaving DNAzymes. Important insights have been gained regarding their metal-dependent activity, global folding, metal binding sites, and catalytic mechanisms for these DNAzymes. Because of their high metal ion selectivity, one of the most important practical applications for DNAzymes is metal ion detection, resulting in highly sensitive and selective fluorescent, colorimetric, and electrochemical sensors for a wide range of metal ions such as Pb(2+), UO2 2 +,[Formula: see text] including paramagnetic metal ions such as Cu(2+). This chapter summarizes recent progresses in in vitro selection of metal ion-selective DNAzymes, their biochemical and biophysical studies and sensing applications.

Effect of nickel content on mechanical properties and fracture toughness of weld metal of WWER-1000 reactor vessel welded joints

International Nuclear Information System (INIS)

Zubchenko, A.S.; Vasilchenko, G.S.; Starchenko, E.G.; Nosov, S.I.

2004-01-01

Welding of WWER-1000 reactor vessel of steel 15X2HMPHIA is performed using the C B -12X2H2MAA wire and PHI-16 or PHI-16A flux. Nickel content in the weld metal usually lays within the limits 1.2-1.9%. The experimental data is shown on the weld metal with the nickel contents 1.28-2.45% after irradiation with fluence up to 260.10 22 n/m 2 at energy more than 0.5 MEV. The embrittlement was measured by shift of critical brittleness temperature. Has appeared, that the weld metal with the low nickel content is the least responsive to irradiation embrittlement. The mechanical properties and fracture toughness of the weld metal with the contents of a nickel less than 1.3% are studied. Specimens CT-1T are tested, the 'master-curve', and its confidence bounds with probability of destruction 5 and 95% is built. 'Master-curve' in the specified confidence interval is affirmed by CT-4T specimens test data. Is shown, that the mechanical properties and fracture toughness of the weld metal with the contents of nickel less than 1.3% satisfy the normative requirements

Study on the prediction of soil heavy metal elements content based on visible near-infrared spectroscopy.

Science.gov (United States)

Liu, Jinbao; Zhang, Yang; Wang, Huanyuan; Du, Yichun

2018-06-15

The estimation of soils heavy metal content can reflect the impending surroundings of surface, which lays theoretical foundation for using covered vegetation to monitor environment and investigate resource. In this study, the contents of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb in 44 soil samples were collected from Fufeng County, Yangling County and Wugong County, Shaanxi Province and were used as data sources. ASD FieldSpec HR (350-2500nm), and then the NOR, MSC and SNV of the reflectance were pretreated, the first deviation, second deviation and reflectance reciprocal logarithmic transformation were carried out. The optimal spectroscopy estimation model of nine heavy metal elements of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb was established by regression method. Comparing the diffuse reflectance characteristics of different heavy metal contents and the effect of different pretreatment methods on the establishment of soil heavy metal spectral inversion model. The results of chemical analysis show that there was a serious Hg pollution in the study area, and the Cd content was close to the critical value. The results show that: (1) NOR, MSC and SNV were adopted for the acquisition of visible near-infrared. Combining differential transformation can improve the information of heavy metal elements in the soil, and use the correlation band energy Significantly improve the stability and predictability of the model. (2) The modeling accuracy of the optimal model of nine heavy metal spectra of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg and Pb by PLSR method were 0.70, 0.79, 0.69, 0.81, 0.86, 0.58, 0.55, 0.99, 0.62. (3) The optimal estimation model of different elements using different treatment methods has better stability and higher precision, and can realize the rapid prediction of nine kinds of heavy metal elements in this region. Copyright © 2018 Elsevier B.V. All rights reserved.

Heavy metals content in degraded agricultural soils of a mountain region related to soil properties

Science.gov (United States)

Navarro-Pedreño, José; Belén Almendro-Candel, María; Gómez, Ignacio; Jordán, Manuel M.; Bech, Jaume; Zorpas, Antonis

2017-04-01

Agriculture has been practiced for long time in Mediterranean regions. Intensive agriculture and irrigation have developed mainly in the valleys and coastal areas. In the mountainous areas, dry farming has been practiced for centuries. Soils have been fertilized using mainly organic amendments. Plants extracted nutrients and other elements like heavy metals presented in soils and agricultural practices modified soil properties that could favor the presence of heavy metals. In this work, it has been checked the content of heavy metals in 100 agricultural soils samples of the NorthWest area of the province of Alicante (Spain) which has been long cultivated with cereals and olive trees, and now soils are abandoned and degraded because of the low agricultural yields. European policy has the aim to improve the sustainable agriculture and recover landscapes of mountain regions. So that, it is important to check the state of the soils (Marques et al. 2007). Soils samples (arable layer) were analyzed determining: pH (1:5, w/v, water extract), equivalent calcium carbonate content, organic matter by Walkley-Black method (Nelson and Sommers 1996), micronutrients (Cu, Fe, Mn, Zn) extracted with DTPA (Lindsay and Norvell, 1978) and measured by atomic absorption spectrometry, and total content of metals (Cd, Cr, Ni, Pb) measured in soil samples after microwave acid digestion (Moral et al. 1996), quantifying the content of metals by ICP analysis. The correlation between soil properties and metals. The results indicated that pH and carbonates are the most important properties of these soils correlated with the metals (both micronutrients and heavy metals). The available micronutrients (all of them) are close correlated with the pH and carbonates in soils. Moreover, heavy metals like Pb and Ni are related to available Mn and Zn. Keywords: pH, carbonates, heavy metals, abandoned soils. References: Lindsay,W.L., andW.A. Norvell. 1978. "Development of a DTPA Soil Test for Zinc, Iron

Content and the forms of heavy metals in bottom sediments in the zone of industrial pollution sources ,

Directory of Open Access Journals (Sweden)

Voytyuk Y.Y.

2014-12-01

Full Text Available Regularities in the distribution of heavy metals in sediments in the zone of influence of the steel industry in Mariupol are installed. The study results of the forms of occurrence of Zn, Pb, Cu, Cr, Ni are represented. Ecological and geochemical assessment of sediment contamination by heavy metals is performed. The main sources of pollution of bottom sediments are air borne emissions from industrial plants, hydrogenous pollution in industrial sewage entering the water, sewage sludge, ash dumps, slag, ore, sludge, oil spills and salt solutions. Pollution hydrogenous sediments may be significant, contaminated sediments are a source of long-term contamination of water, even after cessation of discharges into rivers untreated wastewater. The environmental condition of bottom sediments in gross content of heavy metals is little information because they do not reflect the transformation and further migration to adjacent environment. The study forms of giving objective information for ecological and geochemical evaluation. The study forms of heavy metals in the sediments carried by successive extracts. Concentrations of heavy metals in the extracts determined by atomic absorption spectrometer analysis CAS-115. It was established that a number of elements typical of exceeding their content in bottom sediments of the background values, due likely to their technogenic origin. Man-made pollution of bottom sediments. Mariupol has disrupted the natural form of the ratio of heavy metals. In the studied sediments form ion exchange increased content of heavy metals, which contributes to their migration in the aquatic environment.

Effect of organosolv and soda pulping processes on the metals content of non-woody pulps.

Science.gov (United States)

González, M; Cantón, L; Rodríguez, A; Labidi, J

2008-09-01

In this work the effect of different pulping processes (ethyleneglycol, diethyleneglycol, ethanolamine and soda) of tow abounded raw materials (empty fruit bunches - EFB and rice straw) on the ash, silicates and metals (Fe, Zn, Cu, Pb, Mn, Ni and Cd) content of the obtained pulps have been studied. Results showed that pulps obtained by diethyleneglycol pulping process presented lower metals content (756 microg/g and 501 microg/g for EFB and rice straw pulp, respectively) than soda pulps (984 microg/g and 889 microg/g). Ethanolamine pulps presented values of holocellulose (74% and 77% for EFB and rice straw pulp, respectively), alpha-cellulose (74% and 69%), kappa number (18.7 and 18.5) and viscosity (612 and 90 6ml/g) similar to those of soda pulp, and lower lignin contents (11% and 12%).

Glassy slags as novel waste forms for remediating mixed wastes with high metal contents

International Nuclear Information System (INIS)

Feng, X.; Wronkiewicz, D.J.; Bates, J.K.; Brown, N.R.; Buck, E.C.; Gong, M.; Ebert, W.L.

1994-01-01

Argonne National Laboratory (ANL) is developing a glassy slag final waste form for the remediation of low-level radioactive and mixed wastes with high metal contents. This waste form is composed of various crystalline and metal oxide phases embedded in a silicate glass phase. This work indicates that glassy slag shows promise as final waste form because (1) it has similar or better chemical durability than high-level nuclear waste (HLW) glasses, (2) it can incorporate large amounts of metal wastes, (3) it can incorporate waste streams having low contents of flux components (boron and alkalis), (4) it has less stringent processing requirements (e.g., viscosity and electric conductivity) than glass waste forms, (5) its production can require little or no purchased additives, which can result in greater reduction in waste volume and overall treatment costs. By using glassy slag waste forms, minimum additive waste stabilization approach can be applied to a much wider range of waste streams than those amenable only to glass waste forms

Study of aluminum content in a welding metal by thermoelectric measurements

Science.gov (United States)

Carreón, H.; Ramirez, S.; Coronado, C.; Salazar, M.

2018-03-01

This work investigates the effect caused by the aluminum content in a welding metal and its variation in mechanical properties through the use of a non-destructive thermoelectric technique. It is known that aluminum has positive effects as deoxidizer in low percentages and alloying element together with Niobium and Vanadium. Aluminum has a positive and negative effect, initially improves the mechanical properties of the metal, as it acts as a grain refiner, increasing the yield strength, but in larger quantities, important mechanical properties such as hardness and toughness are seriously affected. For this purpose, HSLA ASTM 572 Gr. 50 steel was used as the base metal, where the weld metal was deposited, after which the specimens were fabricated and the mechanical tests and non-destructive tests were carried out. The sensitivity of the thermoelectric potential technique to microstructural and chemical composition changes was confirmed. The evolution of absolute thermoelectric potential (TEP) values with respect to the percentage of aluminum added to the weld was observed, being also quite sensitive to defects such as micro-cracks.

Evaluation of Wet Digestion Methods for Quantification of Metal Content in Electronic Scrap Material

Directory of Open Access Journals (Sweden)

Subhabrata Das

2017-11-01

Full Text Available Recent advances in the electronics sector and the short life-span of electronic products have triggered an exponential increase in the generation of electronic waste (E-waste. Effective recycling of E-waste has thus become a serious solid waste management challenge. E-waste management technologies include pyrometallurgy, hydrometallurgy, and bioleaching. Determining the metal content of an E-waste sample is critical in evaluating the efficiency of a metal recovery method in E-waste recycling. However, E-waste is complex and of diverse origins. The lack of a standard digestion method for E-waste has resulted in difficulty in comparing the efficiencies of different metal recovery processes. In this study, several solid digestion protocols including American Society for Testing and Materials (ASTM-D6357-11, United States Environment Protection Agency Solid Waste (US EPA SW 846 Method 3050b, ultrasound-assisted, and microwave digestion methods were compared to determine the metal content (Ag, Al, Au, Cu, Fe, Ni, Pb, Pd, Sn, and Zn of electronic scrap materials (ESM obtained from two different sources. The highest metal recovery (mg/g of ESM was obtained using ASTM D6357-11 for most of the metals, which remained mainly bound to silicate fractions, while a microwave-assisted digestion protocol (MWD-2 was more effective in solubilizing Al, Pb, and Sn. The study highlights the need for a judicious selection of digestion protocol, and proposes steps for selecting an effective acid digestion method for ESM.

Heavy metal contents in the sediments of astatic ponds: Influence of geomorphology, hydroperiod, water chemistry and vegetation.

Science.gov (United States)

Gołdyn, Bartłomiej; Chudzińska, Maria; Barałkiewicz, Danuta; Celewicz-Gołdyn, Sofia

2015-08-01

The contents of heavy metals (Cd, Cr, Cu, Ni, Pb, Zn) were analysed in the bottom sediments of 30 small, astatic ponds located in the agricultural landscape of Western Poland. The samples were collected from 118 stations located in patches of four vegetation types. Relationships between the contents of particular elements and four groups of factors (geomorphology, hydroperiod, water quality and vegetation) were tested using Redundancy Analysis (RDA). The most important factors influencing the heavy metal contents were the maximum depth and area of the pond, its hydroperiod, water pH and conductivity values. In general, low quantities of heavy metals were recorded in the sediments of kettle-like ponds (small but located in deep depressions) and high in water bodies of the shore-bursting type (large but shallow). Moreover, quantities of particular elements were influenced by the structure of the vegetation covering the pond. Based on the results, we show which types of astatic ponds are most exposed to contamination and suggest some conservation practices that may reduce the influx of heavy metals. Copyright © 2015 Elsevier Inc. All rights reserved.

Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals

Science.gov (United States)

Mao, Gaojun; Cao, Rui; Yang, Jun; Jiang, Yong; Wang, Shuai; Guo, Xili; Yuan, Junjun; Zhang, Xiaobo; Chen, Jianhong

2017-05-01

Multi-pass weld metals were deposited on Q345 base steel using metal powder-flux-cored wire with various Ni contents to investigate the effects of the Ni content on the weld microstructure and property. The types of the microstructures were identified by optical microscope, scanning electron microscope, transmission electron microscope, and micro-hardness tests. As a focusing point, the lath bainite and lath martensite were distinguished by their compositions, morphologies, and hardness. In particular, a number of black plane facets appearing between lath bainite or lath martensite packets were characterized by laser scanning confocal microscope. The results indicated that with the increase in Ni contents in the range of 0, 2, 4, and 6%, the microstructures in the weld-deposited metal were changed from the domination of the granular bainite to the majority of the lath bainite and/or the lath martensite and the micro-hardness of the weld-deposited metal increased. Meanwhile, the average width of columnar grain displays a decreasing trend and prior austenite grain size decreases while increases with higher Ni content above 4%. Yield strength and ultimate tensile strength decrease, while the reduction in fracture area increases with the decreasing Ni mass fraction and the increasing test temperature, respectively. And poor yield strength in Ni6 specimen can be attributed to elements segregation caused by weld defect. Finally, micro-hardness distribution in correspondence with specimens presents as a style of cloud-map.

Heavy metal content of lichens in relation to distance from a nickel smelter in Sudbury, Ontario

Energy Technology Data Exchange (ETDEWEB)

Nieboer, E; Ahmed, H M; Puckett, K J; Richardson, D H.S.

1972-01-01

The Sudbury region of Ontario has large deposits of nickel, iron, and copper, and thus a number of smelting plants which produce sulfur dioxide and heavy metal pollution. Since lichens are good indicators of SO/sub 2/ pollution levels, the pattern of heavy metal content in lichen species in the area of a copper smelter in Sudbury was correlated with distance from the smelter to ascertain whether lichens might also be good indicators of the amount of heavy metal fallout. The lichens were analyzed qualitatively and quantitatively. All seven species of lichens contained copper, iron, zinc, nickel, manganese, and lead. Cadmium and cobalt were detected in two species. Neither gold nor silver could be identified in lichen material with the tests used. A pollution model was developed and compared to field results. The simple dilution of the stack effluent was consistent with the fact that the lichen metal content was related to the reciprocal of the distance from the pollution source. The lichens from the area could tolerate simultaneously high concentrations of several heavy metals that are known to be toxic to other plants. The mechanism of metal uptake was not clearly established. The study showed that lichens and other epiphytes are potentially the most useful indicators of heavy metal fallout around industrial plants.

A city scale study on the effects of intensive groundwater heat pump systems on heavy metal contents in groundwater.

Science.gov (United States)

García-Gil, Alejandro; Epting, Jannis; Garrido, Eduardo; Vázquez-Suñé, Enric; Lázaro, Jesús Mateo; Sánchez Navarro, José Ángel; Huggenberger, P; Calvo, Miguel Ángel Marazuela

2016-12-01

As a result of the increasing use of shallow geothermal resources, hydraulic, thermal and chemical impacts affecting groundwater quality can be observed with ever increasing frequency (Possemiers et al., 2014). To overcome the uncertainty associated with chemical impacts, a city scale study on the effects of intensive geothermal resource use by groundwater heat pump systems on groundwater quality, with special emphasis on heavy metal contents was performed. Statistical analysis of geochemical data obtained from several field campaigns has allowed studying the spatiotemporal relationship between temperature anomalies in the aquifer and trace element composition of groundwater. The relationship between temperature and the concentrations of trace elements resulted in weak correlations, indicating that temperature changes are not the driving factor in enhancing heavy metal contaminations. Regression models established for these correlations showed a very low reactivity or response of heavy metal contents to temperature changes. The change rates of heavy metal contents with respect to temperature changes obtained indicate a low risk of exceeding quality threshold values by means of the exploitation regimes used, neither producing nor enhancing contamination significantly. However, modification of pH, redox potential, electrical conductivity, dissolved oxygen and alkalinity correlated with the concentrations of heavy metals. In this case, the change rates of heavy metal contents are higher, with a greater risk of exceeding threshold values. Copyright © 2016 Elsevier B.V. All rights reserved.

Selected Heavy Metal Content in Ultra basic Soil and Mengkudu (Morinda citrifolia) from Kuala Pilah, Negeri Sembilan, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Wan Mohd Razi Idris; Zulfahmi Ali Rahman; Kadderi Mohd Desa; Tukimat Lihan; Azman Hashim; Sharilnizam Yusof; Kuan, L.H.

2009-01-01

This study was carried out at an ultra basic area, Selaru (S1 and S2) dan Felda Rokan Barat (S3), Kuala Pilah, Negeri Sembilan. Eighteen samples of plant and their substrates were collected from study area. The purpose of this study was to determine heavy metal such as Ni, Cr, Mn, Co, Fe and Zn contents in soils and different parts of the plant, such as leaf, stem, root and fruit. Biologal Absorption Coefficient (BAC) of the plant was obtained by calculation. Heavy metals content in the plant were extracted by digestion method whereas in soil the heavy metals were extracted by sequential extraction. Heavy metals content in soil and plant extract was determined using Flame Atomic Absorption Spectrophotometer. It was found that heavy metal concentrations in soil substrate for mengkudu (Morinda citrifolia) were high for Fe followed by Cr, Ni, Mn, Zn and Co with average concentration of 1208.5, 583.4, 352.4, 352.4, 70.7 and 53.6 mg.kg -1 , respectively. Available Mn and Zn concentrations were higher than the other heavy metals in term of percentage. Fe and Mn were dominant in all parts of plants however in terms of BAC average, Co showed the highest enrichment value in all parts of the plants. (author)

Riboflavin content of coelomocytes in earthworm (Dendrodrilus rubidus) field populations as a molecular biomarker of soil metal pollution

International Nuclear Information System (INIS)

Plytycz, Barbara; Lis-Molenda, Urszula; Cygal, Malgorzata; Kielbasa, Edyta; Grebosz, Anna; Duchnowski, Michal; Andre, Jane; Morgan, A. John

2009-01-01

The effect of Pb + Zn on coelomocyte riboflavin content in the epigeic earthworm Dendrodrilus rubidus inhabiting three metalliferous soils and one reference soil was measured by flow cytometry and spectrofluorimetry. A reciprocal polluted↔unpolluted worm transfer experiment (4-week exposure) was also performed. High proportions of autofluorescent eleocytes were counted in worms from all localities, but intense riboflavin-derived autofluorescence was detectable only in reference worm eleocytes. Other findings were: (i) fluorophore(s) other than riboflavin is/are responsible for eleocyte autofluorescence in residents of metalliferous soils; (ii) riboflavin content was reduced in the eleocytes of worms transferred from unpolluted to metal-polluted soil; (iii) the riboflavin content of D. rubidus eleocytes is a promising biomarker of exposure; (iv) COII mitochondrial genotyping revealed that the reference population is genetically distinct from the three mine populations; (v) metal exposure rather than genotype is probably the main determinant of inter-population differences in eleocyte riboflavin status. - Soil metal pollution reduces riboflavin content of earthworm eleocytes.

Riboflavin content of coelomocytes in earthworm (Dendrodrilus rubidus) field populations as a molecular biomarker of soil metal pollution

Energy Technology Data Exchange (ETDEWEB)

Plytycz, Barbara, E-mail: barbara.plytycz@uj.edu.p [Institute of Zoology, Jagiellonian University, Ingardena 6, PL 30-060 Krakow (Poland); Lis-Molenda, Urszula; Cygal, Malgorzata; Kielbasa, Edyta; Grebosz, Anna [Institute of Zoology, Jagiellonian University, Ingardena 6, PL 30-060 Krakow (Poland); Duchnowski, Michal [Institute of Environmental Sciences, Jagiellonian University, Krakow (Poland); Andre, Jane; Morgan, A. John [Cardiff School of Biosciences, Main Building, Cardiff University, Cardiff CF10 3TL, Wales (United Kingdom)

2009-11-15

The effect of Pb + Zn on coelomocyte riboflavin content in the epigeic earthworm Dendrodrilus rubidus inhabiting three metalliferous soils and one reference soil was measured by flow cytometry and spectrofluorimetry. A reciprocal pollutedreversibleunpolluted worm transfer experiment (4-week exposure) was also performed. High proportions of autofluorescent eleocytes were counted in worms from all localities, but intense riboflavin-derived autofluorescence was detectable only in reference worm eleocytes. Other findings were: (i) fluorophore(s) other than riboflavin is/are responsible for eleocyte autofluorescence in residents of metalliferous soils; (ii) riboflavin content was reduced in the eleocytes of worms transferred from unpolluted to metal-polluted soil; (iii) the riboflavin content of D. rubidus eleocytes is a promising biomarker of exposure; (iv) COII mitochondrial genotyping revealed that the reference population is genetically distinct from the three mine populations; (v) metal exposure rather than genotype is probably the main determinant of inter-population differences in eleocyte riboflavin status. - Soil metal pollution reduces riboflavin content of earthworm eleocytes.

Effect of nickel content on mechanical properties and fracture toughness of weld metal of WWER-1000 reactor vessel welded joints

Energy Technology Data Exchange (ETDEWEB)

Zubchenko, A.S.; Vasilchenko, G.S.; Starchenko, E.G.; Nosov, S.I

2004-08-01

Welding of WWER-1000 reactor vessel of steel 15X2HMPHIA is performed using the C{sub B}-12X2H2MAA wire and PHI-16 or PHI-16A flux. Nickel content in the weld metal usually lays within the limits 1.2-1.9%. The experimental data is shown on the weld metal with the nickel contents 1.28-2.45% after irradiation with fluence up to 260.10{sup 22}n/m{sup 2} at energy more than 0.5 MEV. The embrittlement was measured by shift of critical brittleness temperature. Has appeared, that the weld metal with the low nickel content is the least responsive to irradiation embrittlement. The mechanical properties and fracture toughness of the weld metal with the contents of a nickel less than 1.3% are studied. Specimens CT-1T are tested, the 'master-curve', and its confidence bounds with probability of destruction 5 and 95% is built. 'Master-curve' in the specified confidence interval is affirmed by CT-4T specimens test data. Is shown, that the mechanical properties and fracture toughness of the weld metal with the contents of nickel less than 1.3% satisfy the normative requirements.

Migration of heavy metals in soils in a uranium mining area

International Nuclear Information System (INIS)

Hu Ruixia; Gao Bai; Hu Baoqun; Feng Jiguang

2009-01-01

Contents of several heavy metals (Zn,Ni,Cu,Cd,Pb) in soil samples collected from different depths of the soil sections in a uranium mining area were analyzed, and vertical migration dis-ciplines of heavy metals were obtained. The results show that the concents of heavy metals in vertical direction decrease as the soil increases in thickness and there is a trend of facies-cumulation for the heavy metals. The accumulation status of each heavy metal in soils differs, which is dependent on the content and migration velocity of the heavy metal itself, the local natural environment about the soil, etc. (authors)

Content of heavy metals and naturally occurring radioactive material in Leucaena leucocaphala (Lam.) de wit

International Nuclear Information System (INIS)

Nurul Sareeza Azidin

2012-01-01

This research was done to determine the content of heavy metals in Leucaena leucocaphala (Lam.) de Wit (Petai Belalang) at 5 different areas. Those areas were in the middle of city, former mining area, industrial area, domestic waste disposal area, and on expressway roadside. Heavy metal poisoning can happen if the concentration is too high and will cause severe damage to human health. For instance, it may cause gene mutation, cancer and damage to the human body systems. This plant was selected for the study of heavy metals and radionuclide content in the soil. The reason of selecting this plant is because this plant can live in extreme conditions, and perhaps able to absorb those elements better than other legumes. The aim of this study was to determine the content of toxic heavy metals in leaves, stems and roots of Leucaena leucocaphala including the soil where it is grown. The second objective was determine NORM in the soil where the plant grew and the last objective was to determine the transfer factor of heavy metals by the plant. The content analysis of toxic heavy metals for example Cu, Zn, Cd, Hg and Pb were determined by using the Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Gamma ray spectrometry on the other hand, was used to determine K-40, Ra-226, U-238 and Th-232 in the soil where the plant was sampled. The activity concentration of Ra-226, K-40, U-238 and Th-232 determined were 7.47 ± 3.03 Bq/ kg - 256.92 ± 164.36 Bq/ kg, 95.55 ± 72.62 Bq/ kg - 435.60 ± 88.32 Bq/ kg, 21.83 ± 8.83 Bq/ kg - 165.28 ± 109.61 Bq/ kg dan 43.41 ± 7.06 Bq/ kg - 91.19 ± 11.13 Bq/ kg respectively. In general, the former mining area recorded the highest heavy metal concentration for Cu (28.20 ± 32.54 mg/ kg), Zn (114.67 ± 75,61 mg/ kg), Cd (0.31 ± 0.11 mg/ kg) and Pb (48.08 ± 33.60 mg/ kg). Whereas the highest concentration of As recorded was on the roadside (261.92 ± 132.64) and Hg (0.44 ± 0.36 mg/kg) in the middle of the city. (author)

Method to determine the contents of economically interesting metals in manganese nodules

International Nuclear Information System (INIS)

Michaelis, W.; Fanger, U.; Pepelnik, R.; Mueller, A.

1977-01-01

Metals which are economically important (as copper, nickel) can be determined in manganese nodules by analysing the activating gamma spectra which are measured after neutron irradiation of the samples. Irradiating the samples with fast neutrons and analysing the activity thus reduced with the help of a gamma detector is expected to improve the method. This serves to obtain the ratio of the radiation intensities of two main components (Mu, Fe) and using this, the percental metal content can be determined through known geo-chemical correlation tables and curves. The method is described in detail. (RB) [de

Trace metal depositional patterns from an open pit mining activity as revealed by archived avian gizzard contents.

Science.gov (United States)

Bendell, L I

2011-02-15

Archived samples of blue grouse (Dendragapus obscurus) gizzard contents, inclusive of grit, collected yearly between 1959 and 1970 were analyzed for cadmium, lead, zinc, and copper content. Approximately halfway through the 12-year sampling period, an open-pit copper mine began activities, then ceased operations 2 years later. Thus the archived samples provided a unique opportunity to determine if avian gizzard contents, inclusive of grit, could reveal patterns in the anthropogenic deposition of trace metals associated with mining activities. Gizzard concentrations of cadmium and copper strongly coincided with the onset of opening and the closing of the pit mining activity. Gizzard zinc and lead demonstrated significant among year variation; however, maximum concentrations did not correlate to mining activity. The archived gizzard contents did provide a useful tool for documenting trends in metal depositional patterns related to an anthropogenic activity. Further, blue grouse ingesting grit particles during the time of active mining activity would have been exposed to toxicologically significant levels of cadmium. Gizzard lead concentrations were also of toxicological significance but not related to mining activity. This type of "pulse" toxic metal exposure as a consequence of open-pit mining activity would not necessarily have been revealed through a "snap-shot" of soil, plant or avian tissue trace metal analysis post-mining activity. Copyright © 2010 Elsevier B.V. All rights reserved.

Content and distribution of trace metals in pristine permafrost environments of Northeastern Siberia, Russia

Science.gov (United States)

Antcibor, I.; Eschenbach, A.; Kutzbach, L.; Bolshiyanov, D.; Pfeiffer, E.-M.

2012-04-01

Arctic regions are one of the most sensitive areas with respect to climatic changes and human impacts. Research is required to discover how the function of permafrost soils as a buffering system for metal pollutants could change in response to the predicted changes. The goal of this work is to determine the background levels of trace metals in the pristine arctic ecosystems of the Lena River Delta in Northeastern Siberia and to evaluate the possible effect of human impacts on this arctic region. The Lena River Delta represents areas with different dominating geomorphologic processes that can generally be divided between accumulation and erosion sites. Frequent changes of the river water level create different periods of sedimentation and result in the formation of stratified soils and sediment layers which are dominated either by mineral substrates with allochthonous organic matter or pure autochthonous peat. The deposited sediments that have formed the delta islands are mostly composed of sand fractions; therefore the buffering effects of clay materials can be neglected. Samoylov Island is representative of the south-central and eastern modern delta surfaces of the Lena River Delta and is selected as a pilot study site. We determined total element contents of Fe, Mn, Zn, Cd, Ni, Cu, As, Pb, Co and Hg in soil horizons from different polygonal elevated rims, polygonal depressed centers and the middle floodplain. High gravimetric concentrations (related to dry mass of soil material) of Mn and Fe are found within all soil profiles and vary from 0.14 to 1.39 g kg-1 and from 10.7 to 41.2 g kg-1, respectively. While the trace element concentrations do not exceed typical crustal abundances, the maximum values of most of the metals are observed within the soil profile situated at the middle floodplain. This finding suggests that apart from the parent material the second potential source of trace metals is due to allochthonous substance input during annual flooding of the

Monitoring Heavy Metal Contents with Sphagnum Junghuhnianum Moss Bags in Relation to Traffic Volume in Wuxi, China

Directory of Open Access Journals (Sweden)

Rong Hu

2018-02-01

Full Text Available Despite its small size, a moss bag can reveal the different temporal and spatial deposition patterns of pollutants at a particular site; therefore, researchers can use moss bags to determine pollution sources and to put forward strategies for pollution control. Although the use of moss bags to monitor atmospheric pollution has been widely reported in Europe, there are few such empirical studies in China. Thus, in this study, bags containing the moss Sphagnum junghuhnianum were used to assess the concentrations of heavy metals (chromium (Cr, copper (Cu, lead (Pb, vanadium (V, and zinc (Zn at five sampling sites (four roads and a forest park during the summer and winter of 2012. According to the relative accumulation factor (RAF and contamination factor (CF results, pollution in winter was heavier than that in summer, and Cr was found to be the most contaminating, having the highest mean CF. There was a significant positive correlation (p < 0.05 between traffic volume and concentration for three heavy metals (Cr, Cu, and V in winter, whereas a significant positive correlation (p < 0.05 was observed between traffic volume and concentrations for four heavy metal elements (Cr, Pb, V, and Zn in summer, indicating a close relationship between heavy metal contents and traffic volume. Although there was substantial variation in the concentrations of the five heavy metals in the moss bags, significant correlations between heavy metals suggested that the contaminants originated from a common source, namely vehicle emissions. The results demonstrated that the four roads were subject to different degrees of pollution depending on the volume of traffic using each road. Therefore, the results of this study suggest that traffic volume is a major reason for heavy metal pollution.

Content of heavy metals and chemical composition of the hydraulic cement marketed in Costa Rica

International Nuclear Information System (INIS)

Venegas Padilla, Jimmy; Calderon Jimenez, Bryan; Sibaja Brenes, Jose Pablo; Salazar Delgado, Jorge; Rodriguez Castro, Ellen

2017-01-01

The concentration of heavy metals, specifically lead (Pb), chromium (Cr), and mercury (Hg), and also the chemical composition (CaO, SiO 2 , Al 2 O 3 , Fe 2 O 3 among others) were quantified of the hydraulic cement marketed in Costa Rica. The physical parameters of density and fineness confirmed the homogeneity of the samples to determinate accurately the content of the major components and heavy metals in the cements. The mineralogical constitution was determined by X-ray Fluorescence (XRF). Specifically, the cements showed a mass fraction in the range of (61.22 - 63.12) % of CaO, (18.10 - 26.14) % of SiO 2 , (3.70 - 6.05) % of Al 2 O 3 , (2.57 - 3.36) % Fe 2 O 3 and (0.60 - 4.09) % de MgO. Other components such as MgO, TiO 2 , K 2 O, P 2 O 5 , Na 2 O and Mn 2 O 3 were found on an average mass fraction lower than 1%. Moreover, using the ignition test results and assuming a complete decomposition of the limestone, it was possible to estimate (indirectly) the content of CaCO 3 and CaO given by the raw materials. The metal content of the heavy metals was determined using Flame Atomic Absorption Spectroscopy (FAAS), Electrothermal Atomic Absorption Spectroscopy (ETAAS), and Cold Vapor Atomic Absorption Spectroscopy (CVAAS). The analysis demonstrated that the Pb in cements is present in different concentrations ranging the (2.45 ± 0.72) mg kg -1 to the (8.95 ± 1.34) mg kg -1 . Chromium (Cr) was presented in higher concentrations of (10.69 ± 0.92) mg kg-1. The Hg concentration was below 0.141 ± 0.021 mg kg -1 . In general terms, the hydraulic cements marketed and used in Costa Rica have a suitable chemical composition compared with some cements marketed in Germany. The results of the content of heavy metals presented in this study provide significant information for future studies in the area of toxicology, ecotoxicology, standardization and national regulation. (author) [es

RESEARCH ON THE QUAIL EGGS ALBUMEN CONTENT IN SOME HEAVY METALS

Directory of Open Access Journals (Sweden)

I. VIZITIU

2015-12-01

Full Text Available Out of a sample batch of 20 Japanese quails, Pharaoh race, with an age of 100 days and weighing 245 g, approximately 200 eggs were collected at the peak phase of the laying period. The eggs were measured, weighed and broken, separating the albumen from the other components. The data obtained served to calculate the physical and morphological indices. Primary chemical composition, caloricity, heavy metals content were first determined, the following data being obtained: quail eggs albumen has an average weight of 7.1025±0.061g, an average volume of 7.158±0.09cm3, an average density of 1.0168±0.0139 g/cm3 and an index (of freshness of 0.0797±0.0015. The albumen contains: 86.76% water, 13.24% dry matter, 0.835% mineral matter, 11.37% protein, 1.03% non-nitrogenous extractive substances and a caloricity of 289.498 kJ for 100 g product. The average content of heavy metals in albumen was: 1.33*10-3 ppm, for cadmium; 8.83*10-2 ppm, for zinc; 1.005 ppm, for cooper and 0.0 ppm, respectively, for lead.

PIGMENT CONTENT OF Chlorella vulgaris BEIJ. UNDER INFLUENCE OF THE SODIUM SELENITE AND METALS IONS

Directory of Open Access Journals (Sweden)

O. I.

2016-02-01

Full Text Available The aim of the research was to determine the conditions obtaining in the aquaculture of Chlorella vulgaris Beij. algosubstantion enriched with selenium and bioactive metals. For this purpose, the content of seaweed pigments studied by the action of sodium selenite in a concentration based on Se4+: 0.5, 5.0, 10.0 and 20.0 mg / dm3 for 1, 3 and 7 days and while exposed 10.0 mg Se4 +/dm3 and Zn2+, Mn2 +, Co2 +, Cu2 +, Fe3 + in concentrations of 5.0 mg/dm 3, 0.25, 0.002, 0.008 and 0.05 mg/dm3, respectively, within 7 days of culturing. The content of pigments was determined spectrophotometrically, the cellular walls were given off in the percoll gradient and investigated microscopically. The pigments content in Ch. vulgaris increase by 1,5–2,5 times in comparison with control sample under the influence of 10 mg Se(IV/dm3 with and without metal ions. In the same condition a ratio of chlorophylls a/b increased, that accompanied by the formation in cells of the second cell wall as the sign of successful adaptation process in the Chlorella cells under the influence of these factors. Thus, the cultivation of chlorella, enriched with selenium and bioactive metals, is possible within 7 days under the influence of 10 mg Se (IV/dm3 and mentioned concentration of these metal ions.

Species variation of Aegilops genus and heavy metal content in plant habitat soil at southern Adriatic localities

Directory of Open Access Journals (Sweden)

Dimitrijević Miodrag

2014-01-01

Full Text Available The Aegilops genus is a wild relative to the bread wheat, having chromosomes homologous to wheat chromosomes. That genus could be the source of many usefull abiotic stress tolerance genes. Facing a global climate changes, as well as, environmental erosion, it is important to create a desirable genetic variability that could correspond to environmental challenges. Heavy metals in soil could cause soil pollution, could lead to different phenotypic changes in plants, and could enter food chain. Assessment of Aegilops sp. population variation, as well as, heavy metal content in their habitat was the main goal in this research. Aegilops population composition was examined and samples were taken from 55 localities of South Adriatic coastal and littoral areas. Topsoil samples from all the localities were taken and heavy metal content, namely Cr, Pb, Zn, Ni, Cd and Cu, was analyzed,. Manganese content was measured, as well. Value of pH was established.

Total and available metal contents in sediments by synchrotron radiation total reflection X-ray fluorescence

International Nuclear Information System (INIS)

Moreira, Silvana; Sobrinho, Gilmar A.; Jesus, Edgar F.O. de; Lopes, Ricardo T.

2002-01-01

In this work the total and available contents of Al, Si, Cl, K, Mn, Fe, Co, Ni, Cu, Zn, Sr, Zr, Ba, Ce and Pb in sediments from river Atibaia were determined by Synchrotron Radiation Total Reflection X-Ray Fluorescence technique. The detection limits for K series varies from 200 ng.mL -1 for Al to 2 ng.mL -1 for Zn while for L series the value varies from 20 ng.mL -1 for Ba to 10 ng.mL -1 for Pb. The samples were submitted to two different processes, in order to obtain the total and biological available metal contents. The information about metal content is a important parameter for a correct evaluation about the hydrologic cycle in Piracicaba basin. All the measure were carried out at the National Synchrotron Light Laboratory, Campinas, SP, Brazil, using a white beam for excitation. (author)

Effect of distance from the roadway on heavy metal content and egg quality of village laying hen's egg along roadsides of tokat-turhal, turkey

International Nuclear Information System (INIS)

Sekeroglu, A.; Sari, H.; Sarica, M.; Duman, M.

2013-01-01

In this study, the heavy metal contents and egg quality characteristics of chicken eggs was studied. The eggs have been collected at distances of 0-100 (Distance A), 100-200 (Distance B) and 200-300 m (Distance C) away from the edge of Tokat-Turhal road.The distance from roadway had no significant effect on egg Cu and Mn contents (P>0.05), although a significant effect on egg Cd and Pb content (P 0.05). Eggs obtained from distance A and B had significantly higher weight than obtained from distance C (P<0.05). Egg obtained from distance B had significantly lower egg shell colour scales than those of the other distances (P<0.01). And, egg yolk colour was showed a significant variation among the distances away from the roadway, and the highest yolk colour value was detected in distance B (P<0.05). Depending on obtained results, it can be concluded that the egg heavy metal concentrations exceeded background levels for hen eggs. Therefore, consumers should be aware of the possible health risks related by the use of these eggs which has obtained from side of road.

Evaluation of heavy metal content in irradiated sludge, chicken manure and fertilized soil in Indonesia

International Nuclear Information System (INIS)

Hilmy, N.; Suwirma, S.; Surtipanti, S.; Harsojo

1997-01-01

The contents of heavy metals, Hg, Cd, Cr, Cu, Ni, Pb, Zn and Co, were determined in two irradiated sludges, chicken manure and fertilized soil. Sludge I was collected from a treatment plant in Jakarta city, Sludge II from a sludge reservoir in a Jakarta suburb, chicken manure was obtained from a farm south of Jakarta, and the soil had been treated with phosphate fertilizer since 1967. The sludges and chicken manure were collected during the rainy and dry seasons, and the heavy-metal contents were determined by atomic-absorption spectrometry and neutron-activation analysis. The results obtained are compared with data from Canada, and are discussed in terms of permissible limits in the environment. (author)

THE STUDIES OF METAL CONTENT IN PRECIPITATION WATER IN LUBELSKIE AND LUBUSKIE VOIVODESHIPS IN 2013

Directory of Open Access Journals (Sweden)

Agnieszka Malec

2015-09-01

Full Text Available This paper presents the results of the studies of metal content in precipitation water in 2013, recorded at measuring points within Lubelskie and Lubuskie Voivodeships. It provides a detailed description of the method of collecting and analysing water samples in respect of light- and heavy-metal determination. Based on the results, a general assessment was made of the condition of the environment in the areas in question. Also, the sources of pollution in wet precipitation, and the effects of their introduction into the environment, were determined. It was found that the main pollution elements of precipitation water were linked to anthropogenic sources. The study also established that precipitation water, especially in the sparsely industrialised Włodawa region in the Lubelskie Voivodeship, had generally low pollution levels. It was also noted that in 2013, due to low total precipitation, the environmental impact of metal content was lower than in the preceding years.

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. I. Model and validation

Energy Technology Data Exchange (ETDEWEB)

Hegde, Ganesh, E-mail: ghegde@purdue.edu; Povolotskyi, Michael; Kubis, Tillmann; Klimeck, Gerhard, E-mail: gekco@purdue.edu [Network for Computational Nanotechnology (NCN), Department of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Boykin, Timothy [Department of Electrical and Computer Engineering, University of Alabama, Huntsville, Alabama (United States)

2014-03-28

Semi-empirical Tight Binding (TB) is known to be a scalable and accurate atomistic representation for electron transport for realistically extended nano-scaled semiconductor devices that might contain millions of atoms. In this paper, an environment-aware and transferable TB model suitable for electronic structure and transport simulations in technologically relevant metals, metallic alloys, metal nanostructures, and metallic interface systems are described. Part I of this paper describes the development and validation of the new TB model. The new model incorporates intra-atomic diagonal and off-diagonal elements for implicit self-consistency and greater transferability across bonding environments. The dependence of the on-site energies on strain has been obtained by appealing to the Moments Theorem that links closed electron paths in the system to energy moments of angular momentum resolved local density of states obtained ab initio. The model matches self-consistent density functional theory electronic structure results for bulk face centered cubic metals with and without strain, metallic alloys, metallic interfaces, and metallic nanostructures with high accuracy and can be used in predictive electronic structure and transport problems in metallic systems at realistically extended length scales.

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. I. Model and validation

International Nuclear Information System (INIS)

Hegde, Ganesh; Povolotskyi, Michael; Kubis, Tillmann; Klimeck, Gerhard; Boykin, Timothy

2014-01-01

Semi-empirical Tight Binding (TB) is known to be a scalable and accurate atomistic representation for electron transport for realistically extended nano-scaled semiconductor devices that might contain millions of atoms. In this paper, an environment-aware and transferable TB model suitable for electronic structure and transport simulations in technologically relevant metals, metallic alloys, metal nanostructures, and metallic interface systems are described. Part I of this paper describes the development and validation of the new TB model. The new model incorporates intra-atomic diagonal and off-diagonal elements for implicit self-consistency and greater transferability across bonding environments. The dependence of the on-site energies on strain has been obtained by appealing to the Moments Theorem that links closed electron paths in the system to energy moments of angular momentum resolved local density of states obtained ab initio. The model matches self-consistent density functional theory electronic structure results for bulk face centered cubic metals with and without strain, metallic alloys, metallic interfaces, and metallic nanostructures with high accuracy and can be used in predictive electronic structure and transport problems in metallic systems at realistically extended length scales

An environment-dependent semi-empirical tight binding model suitable for electron transport in bulk metals, metal alloys, metallic interfaces, and metallic nanostructures. I. Model and validation

Science.gov (United States)

Hegde, Ganesh; Povolotskyi, Michael; Kubis, Tillmann; Boykin, Timothy; Klimeck, Gerhard

2014-03-01

Semi-empirical Tight Binding (TB) is known to be a scalable and accurate atomistic representation for electron transport for realistically extended nano-scaled semiconductor devices that might contain millions of atoms. In this paper, an environment-aware and transferable TB model suitable for electronic structure and transport simulations in technologically relevant metals, metallic alloys, metal nanostructures, and metallic interface systems are described. Part I of this paper describes the development and validation of the new TB model. The new model incorporates intra-atomic diagonal and off-diagonal elements for implicit self-consistency and greater transferability across bonding environments. The dependence of the on-site energies on strain has been obtained by appealing to the Moments Theorem that links closed electron paths in the system to energy moments of angular momentum resolved local density of states obtained ab initio. The model matches self-consistent density functional theory electronic structure results for bulk face centered cubic metals with and without strain, metallic alloys, metallic interfaces, and metallic nanostructures with high accuracy and can be used in predictive electronic structure and transport problems in metallic systems at realistically extended length scales.

Time-dependent image potential at a metal surface

International Nuclear Information System (INIS)

Alducin, M.; Diez Muino, R.; Juaristi, J.I.

2003-01-01

Transient effects in the image potential induced by a point charge suddenly created in front of a metal surface are studied. The time evolution of the image potential is calculated using linear response theory. Two different time scales are defined: (i) the time required for the creation of the image potential and (ii) the time it takes to converge to its stationary value. Their dependence on the distance of the charge to the surface is discussed. The effect of the electron gas damping is also analyzed. For a typical metallic density, the order of magnitude of the creation time is 0.1 fs, whereas for a charge created close to the surface the convergence time is around 1-2 fs

Determination of heavy metal content and physico-chemical properties of soils in the vicinity of Tasik Chini, Pahang

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Muhd Barzani Gasim; Mohd Nizam Mohd Said; Wan Mohd Razi Idris; Azman Hashim; Sharilnizam Yusof; Masniyana Jamil

2008-01-01

This study was carried out to determine heavy metal content and physico-chemical properties of soils influencing heavy metal accumulation in some series surrounding the Chini Lakes. A total of 15 topsoil sample were collected randomly from 6 stations. The physical properties that were analyzed include particle size distribution and soil organic matter. Meanwhile, the chemical characteristics determined were pH, electrical conductivity and cation exchange capacity. It was found that heavy metal content of Cd, Cr, Cu, Co, Pb, Zn and Mn were low whereas Fe content was high. The textures of soil studied were clay, loamy sand, sandy loam, clay loam and silty clay loam. The mean of organic matter ranged from 2.68 to 11.46 %. The soil pH showed that the soil studied was acidic with values ranged between 3.36 to 3.72. The range of electrical conductivity mean was between 2150 μScm -1 to 2403 μScm -1 . Cation exchange capacity mean ranged from 2.85 until 8.59 cmol/ kg. Correlation analysis showed that there were positive and negative significant correlations between soils parameters heavy metal concentration. Analysis of variance (ANOVA) showed that there were significant differences in organic matter percentage, pH, cation exchange capacity and heavy metals except cadmium between sampling station. (author)

Contents of heavy metals in urban parks and university campuses

Science.gov (United States)

Zhang, Yong; Chen, Qian

2018-01-01

Because the city park has become an important place for people's daily leisure, and the university campus is one of the most densely populated areas of the city, their environmental pollution is critical for the health and safety of the residents. In this paper, two kinds of evaluation methods were used to evaluate the content of Cu, Zn, As and Pb in soils of city parks and university campus in Xiangtan. The results showed that only Juhuatang Park was a non-polluted area, and the other 7 sampling sites were lightly polluted; Analysis shows the heavy metal contents of soil in city parks are closely related to vehicle emissions, agriculture and irrigation, combustion of household waste, living area and commercial shops, the use of fossil fuels, industrial waste gas and waste residue and other human activities.

Characterizing time-dependent mechanics in metallic MEMS

Directory of Open Access Journals (Sweden)

Geers M.G.D.

2010-06-01

Full Text Available Experiments for characterization of time-dependent material properties in free-standing metallic microelectromechanical system (MEMS pose challenges: e.g. fabrication and handling (sub-μm sized specimens, control and measurement of sub-μN loads and sub-μm displacements over long periods and various temperatures [1]. A variety of experimental setups have been reported each having their pros and cons. One example is a micro-tensile tester with an ingenious electro-static specimen gripping system [2] aiding simple specimen design giving good results at μN and sub-μm levels, but without in-situ full-field observations. Other progressive examples assimilate the specimen, MEMS actuators and load cells on a single chip [3,4] yielding significant results at nN and nm levels with in-situ TEM/SEM observability, though not without complications: complex load actuator/sensor calibration per chip, measures to reduce fabrication failure and unfeasible cofabrication on wafers with commercial metallic MEMS. This work aims to overcome these drawbacks by developing experimental methods with high sensitivity, precision and in-situ full-field observation capabilities. Moreover, these should be applicable to simple free-standing metallic MEMS that can be co-fabricated with commercial devices. These methods will then serve in systematic studies into size-effects in time-dependent material properties. First a numeric-experimental method is developed. It characterizes bending deformation of onwafer μm-sized aluminum cantilevers. A specially designed micro-clamp is used to mechanically apply a constant precise deflection of the beam (zres <50 nm for a prolonged period, see fig. 1. After this period, the deflection by the micro-clamp is removed. Full-field height maps with the ensuing deformation are measured over time with confocal optical profilometry (COP. This yields the tip deflection as function of time with ~3 nm precision, see fig.2. To extract material

NUTRITIONAL VALUE AND HEAVY METALS CONTENTS OF THE DRIED SEA CUCUMBER Stichopus vastus FROM SALEMO ISLAND, INDONESIA

Directory of Open Access Journals (Sweden)

Abdullah Rasyid

2018-01-01

Full Text Available The dried sea cucumber Stichopus vastus is one of the commercially species harvested in Indonesian waters. This study aims to highlight the nutritional value and heavy metals content of dried sea cucumber S. vastus. Proximate (moisture, ash, protein, fat and carbohydrate, mineral (sodium, calcium, potassium and iron and heavy metal (mercury, cadmium, arsenic and lead were determined by standard method of AOAC, while phosphorous was determined by spectrophotometric method. Chondroitin sulphate was determined by UPLC method, glucosamine sulphate and vitamin (A, B1, B2 and E by HPLC method. Results show that protein was the major component in proximate analysis of dried sea cucumber S. vastus in the present study. The protein content was 38.70%. Moisture, ash, fat and carbohydrate content were 19.46%, 34.04%, 0.38% and 7.42% respectively. All vitamins and heavy metals examined in this study were not detected. The sodium content was 8054.36 mg/100 g higher than other minerals. Calcium, potassium, phosphorus and iron content were 2449.9 mg/100 g, 159.77 mg/100 g, 5085.2 mg/100 g and 520.8 mg/100 g respectively. Glucosamine sulphate content was found to be 2.429 g/100 g, whereas chondroitin sulphate was found to be 1.115 g/100 g. It can therefore, be concluded that the dried sea cucumber S. vastus from Salemo Island is safe for human consumption and hence can be used as a source of food supplement in the future. Keywords: food supplement, Salemo island, Stichopus vastus

Heavy metals and metalloids in egg contents and eggshells of passerine birds from Arizona

Science.gov (United States)

Mora, Miguel A.

2003-01-01

Concentrations of inorganic elements were determined in eggs of passerine birds including the endangered southwestern willow flycatcher (Empidonax traillii extimus) from four regions in Arizona. The main aim of the study was to determine the distribution of metals in egg contents and eggshells, with emphasis on the deposition of Sr in eggshells. Seventy eggs of 11 passerine species were collected at four nesting locations during 2000. Aluminum, Ba, Cr, Cu, Mn, Se, Sr, and Zn, were detected primarily in egg contents of all bird species. Arsenic, Ni, Pb, and V were detected primarily in eggshells. A proportion of most inorganic elements accumulated in the eggshell. Concentrations of Ba, Cu, Mn, Se, Sr, and Zn in egg contents and As, Ba, Cu, and V in eggshells of yellow-breasted chats (Icteria virens) were similar among locations. However, concentrations of Mn, Ni, Sr, and Zn in eggshells were significant different among locations. Except for Cu, Mn, Se, and Zn, concentrations of inorganic elements were 2–35 times greater in eggshells than in eggs. Most concentrations of metals and metalloids in eggs and eggshells of all the bird species were below levels known to affect reproduction or that have other deleterious effects. However, I found somewhat elevated concentrations of Sr in eggshells (highest mean=1505 μg/g dw, n=3) of yellow-breasted chats and willow flycatchers, and in egg contents of yellow warblers (Dendroica petechia) and song sparrows (Melospiza melodia). Whether current observed concentrations of Sr in eggshells are affecting nesting birds in Arizona remains to be determined. Strontium and other metals could be associated with lower hatching success in some areas. This study shows that a proportion of many inorganic elements accumulates in the eggshell and that the potential effects on the proper structure and functioning of the eggshell should not be ignored.

Adsorption of acid-extractable organics from oil sands process-affected water onto biomass-based biochar: Metal content matters.

Science.gov (United States)

Bhuiyan, Tazul I; Tak, Jin K; Sessarego, Sebastian; Harfield, Don; Hill, Josephine M

2017-02-01

The impact of biochar properties on acid-extractable organics (AEO) adsorption from oil sands process-affected water (OSPW) was studied. Biochar from wheat straw with the highest ash content (14%) had the highest adsorption capacity (0.59 mg/g) followed by biochar from pulp mill sludge, switchgrass, mountain pine, hemp shives, and aspen wood. The adsorption capacity had no obvious trend with surface area, total pore volume, bulk polarity and aromaticity. The large impact of metal content was consistent with the carboxylates (i.e., naphthenate species) in the OSPW binding to the metals (mainly Al and Fe) on the carbon substrate. Although the capacity of biochar is still approximately two orders of magnitude lower than that of a commercial activated carbon, confirming the property (i.e., metal content) that most influenced AEO adsorption, may allow biochar to become competitive with activated carbon after normalizing for cost, especially if this cost includes environmental impacts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Trace metal depositional patterns from an open pit mining activity as revealed by archived avian gizzard contents

Energy Technology Data Exchange (ETDEWEB)

Bendell, L.I., E-mail: bendell@sfu.ca

2011-02-15

Archived samples of blue grouse (Dendragapus obscurus) gizzard contents, inclusive of grit, collected yearly between 1959 and 1970 were analyzed for cadmium, lead, zinc, and copper content. Approximately halfway through the 12-year sampling period, an open-pit copper mine began activities, then ceased operations 2 years later. Thus the archived samples provided a unique opportunity to determine if avian gizzard contents, inclusive of grit, could reveal patterns in the anthropogenic deposition of trace metals associated with mining activities. Gizzard concentrations of cadmium and copper strongly coincided with the onset of opening and the closing of the pit mining activity. Gizzard zinc and lead demonstrated significant among year variation; however, maximum concentrations did not correlate to mining activity. The archived gizzard contents did provide a useful tool for documenting trends in metal depositional patterns related to an anthropogenic activity. Further, blue grouse ingesting grit particles during the time of active mining activity would have been exposed to toxicologically significant levels of cadmium. Gizzard lead concentrations were also of toxicological significance but not related to mining activity. This type of 'pulse' toxic metal exposure as a consequence of open-pit mining activity would not necessarily have been revealed through a 'snap-shot' of soil, plant or avian tissue trace metal analysis post-mining activity. - Research Highlights: {yields} Archived gizzard samples reveals mining history. {yields} Grit ingestion exposes grouse to cadmium and lead. {yields} Grit selection includes particles enriched in cadmium. {yields} Cadmium enriched particles are of toxicological significance.

The Investigation of Heavy Metal Content (Cu, Cd, Pb in Sapu-Sapu Fish (Hypostomus plecostomus in Bengawan Solo River

Directory of Open Access Journals (Sweden)

Ristiyana Eko Setyarini

2016-12-01

Full Text Available A study had been carried out to investigate heavy metal (Cu, Cd, Pb content in sapu-sapu fish (hypostomus plecostomus in Bengawan Solo river. The type of this research was observational research, with sapu-sapu fish inhabit Bengawan Solo River as the population. The samples were taken with purposive random sampling. Nine sapu-sapu fishes taken from 3 places, i.e.: Nguter Sukoharjo area, Premulung river outlet and Anyar river, 3 fishes from each palce, and then take examined the content of heavy metal. The result of study showed that the average content of Cu: 0.027 mg/100gr, Cd: 0.005 mg/100gr and Pb: 0.042 mg/100gr. Hence, sapu-sapu fish in Be3ngawan Solo had been contaminated with heavy metal (Cu, Cd, and Pb and should not be consumed.

Recycled scrap metal and soils/debris with low radioactive contents

International Nuclear Information System (INIS)

Carriker, A.W.

1996-01-01

Two types of large volume bulk shipments of materials with low radioactivity have characteristics that complicate compliance with normal transport regulations. Scrap metal for recycling sometimes contains radioactive material that was not known or identified by the shipper prior to it being offered for transport to a scrap recycle processor. If the radioactive material is not detected before the scrap is processed, radiological and economic problems may occur. If detected before processing, the scrap metal will often be returned to the shipper. Uranium mill-tailings and contaminated soils and debris have created potential public health problems that required the movement of large volumes of bulk material to isolated safe locations. Similarly, old radium processing sites have created contamination problems needing remediation. The US Department of Transportation has issued exemptions to shippers and carriers for returning rejected scrap metal to original shippers. Other exemptions simplify transport of mill-tailings and debris from sites being remediated. These exemptions provide relief from detailed radioassay of the radioactive content in each conveyance as well as relief from the normal requirements for packaging, shipping documents, marking, labelling, and placarding which would be required for some of the shipments if the exemptions were not issued. (Author)

[Heavy metals contents and Hg adsorption characteristics of mosses in virgin forest of Gongga Mountain].

Science.gov (United States)

Liang, Peng; Yang, Yong-Kui; He, Lei; Wang, Ding-Yong

2008-06-01

Seven main moss species in the Hailuogou virgin forest of Gongga Mountain were sampled to determine their heavy metals (Hg, Cr, Cd, Ni, Pb, Cu, Mn, Zn and Fe) content, and two widely distributed species, Pleurozium schreberi (Brid.) Mitt. and Racomitrium laetum Besch., were selected to study their Hg adsorption characteristics. The results showed that the heavy metals contents in the mosses were lower than the background values in Europe and America, except that the Cd had a comparable value, which indicated that the atmosphere in study area was not polluted by heavy metals and good in quality. The Hg adsorption by P. schreberi and R. laetum was an initiative and rapid process, with the equilibrium reached in about two hours, and could be well fitted by Freundlich and Langmuir equations. Based on Langmuir equation, the maximum Hg adsorption capacities of P. schreberi and R. laetum were 15.24 and 8.19 mg x g(-1), respectively, suggesting that the two mosses had a good capacity of Hg adsorption, and could be used as the bio-monitors of atmospheric Hg pollution.

Dependence of ultrasound attenuation in rare earth metals on ratio of grain size and wavelength

International Nuclear Information System (INIS)

Kanevskij, I.N.; Nisnevich, M.M.; Spasskaya, A.A.; Kaz'mina, V.I.

1978-01-01

Results of investigation of dependences of ultrasound attenuation coefficient α on the ratio of grain average size D and wavelength lambda are presented. The investigations were carried out on rare earth metal samples produced by arc remelting in a vacuum furnace. It is shown that the way of α dependence curves of D/lambda for each of the rare earth metal is determined only by the D. This fact permits to use ultrasound measurement for control average diameter of the rare earth metal grain

Metal ion transport quantified by ICP-MS in intact cells

Science.gov (United States)

Figueroa, Julio A. Landero; Stiner, Cory A.; Radzyukevich, Tatiana L.; Heiny, Judith A.

2016-01-01

The use of ICP-MS to measure metal ion content in biological tissues offers a highly sensitive means to study metal-dependent physiological processes. Here we describe the application of ICP-MS to measure membrane transport of Rb and K ions by the Na,K-ATPase in mouse skeletal muscles and human red blood cells. The ICP-MS method provides greater precision and statistical power than possible with conventional tracer flux methods. The method is widely applicable to studies of other metal ion transporters and metal-dependent processes in a range of cell types and conditions. PMID:26838181

Simple and accurate model for voltage-dependent resistance of metallic carbon nanotube interconnects: An ab initio study

International Nuclear Information System (INIS)

Yamacli, Serhan; Avci, Mutlu

2009-01-01

In this work, development of a voltage dependent resistance model for metallic carbon nanotubes is aimed. Firstly, the resistance of metallic carbon nanotube interconnects are obtained from ab initio simulations and then the voltage dependence of the resistance is modeled through regression. Self-consistent non-equilibrium Green's function formalism combined with density functional theory is used for calculating the voltage dependent resistance of metallic carbon nanotubes. It is shown that voltage dependent resistances of carbon nanotubes can be accurately modeled as a polynomial function which enables rapid integration of carbon nanotube interconnect models into electronic design automation tools.

The impact of sewage sludge treatment on the content of selected heavy metals and their fractions.

Science.gov (United States)

Ignatowicz, Katarzyna

2017-07-01

The aim of the study was to assess the physicochemical properties of compost made of municipal sewage sludge from selected Municipal Sewage Treatment Plant. Content of basic macroelements and heavy metals (Zn, Cu, Cr, Cd, Ni, Pb, Hg, Mg, Ca, N, P, K, Na) and their fractions was determined by means of BCR method. Based on the analyzes, it was found that the content of heavy metals in compost did not exceed the limits set by natural land management of sewage sludge; the compost is very abundant in biogenic elements - nitrogen and phosphorus - and it can be also considered a significant source of calcium and magnesium. The analysis of results obtained from the three-stage chemical extraction revealed that deposits subjected to aerobic stabilization and composting accumulate metals (in descending sequence) in fractions III and II, i.e. fractions virtually inaccessible to the ecosystem in optimal conditions of use. Copyright © 2017 Elsevier Inc. All rights reserved.

Directional dependence of the threshold displacement energies in metal oxides

Science.gov (United States)

Cowen, Benjamin J.; El-Genk, Mohamed S.

2017-12-01

Molecular dynamics (MD) simulations are performed to investigate the directional dependence and the values of the threshold energies (TDEs) for the displacements of the oxygen and metal atoms and for producing stable Frenkel pairs in five metal oxides of Cr2O3, Al2O3, TiO2, SiO2, and MgO. The TDEs for the Frenkel pairs and atoms displacement are calculated in 66 crystallographic directions, on both the anion and cation sublattices. The performed simulations are for metal and oxygen PKA energies up to 350 and 400 eV, respectively. The calculated probability distributions for the atoms displacement and average number of Frenkel pairs produced in the different oxides are compared. The results revealed unique symmetrical patterns of the TDEs for the displacement of the atoms and the formation of stable Frenkel pairs, confirming the strong dependence on the direction and the crystalline structure of the oxides. Results also showed that the formation of stable Frenkel pairs is associated with the displacements of the PKAs and/or of the SKAs. The probabilities of the TDEs for the displacement of the oxygen and metal PKAs are consistently lower than those of the atoms in the crystal. In SiO2, TDEs for the displacement of oxygen and metal atoms and those for the formation of stable Frenkel pairs are the lowest, while those in TiO2 are among the highest. The results for Cr2O3 and Al2O3, which have the same crystal structure, are similar. The calculated TDEs for MgO, Al2O3 and TiO2 are generally in good agreement with the experimental values and the probability distributions of the TDEs for the PKAs in TiO2 are in good agreement with reported MD simulation results.

Changes in fatty acid content and composition between wild type and CsHMA3 overexpressing Camelina sativa under heavy-metal stress.

Science.gov (United States)

Park, Won; Feng, Yufeng; Kim, Hyojin; Suh, Mi Chung; Ahn, Sung-Ju

2015-09-01

Under heavy-metal stress, CsHMA3 overexpressing transgenic Camelina plants displayed not only a better quality, but also a higher quantity of unsaturated fatty acids in their seeds compared with wild type. Camelina sativa L. belongs to the Brassicaceae family and is frequently used as a natural vegetable oil source, as its seeds contain a high content of fatty acids. In this study, we observed that, when subjected to heavy metals (Cd, Co, Zn and Pb), the seeds of CsHMA3 (Heavy-Metal P1B-ATPase 3) transgenic lines retained their original golden yellow color and smooth outline, unlike wild-type seeds. Furthermore, we investigated the fatty acids content and composition of wild type and CsHMA3 transgenic lines after heavy metal treatments compared to the control. The results showed higher total fatty acid amounts in seeds of CsHMA3 transgenic lines compared with those in wild-type seeds under heavy-metal stresses. In addition, the compositions of unsaturated fatty acids-especially 18:1 (oleic acid), 18:2 (linoleic acid; only in case of Co treatment), 18:3 (linolenic acid) and 20:1 (eicosenoic acid)-in CsHMA3 overexpressing transgenic lines treated with heavy metals were higher than those of wild-type seeds under the same conditions. Furthermore, reactive oxygen species (ROS) contents in wild-type leaves and roots when treated with heavy metal were higher than in CsHMA3 overexpressing transgenic lines. These results indicate that overexpression of CsHMA3 affects fatty acid composition and content-factors that are responsible for the fuel properties of biodiesel-and can alleviate ROS accumulation caused by heavy-metal stresses in Camelina. Due to these factors, we propose that CsHMA3 transgenic Camelina can be used for phytoremediation of metal-contaminated soil as well as for oil production.

Assessment of metals content in dandelion (Taraxacum officinale) leaves grown on mine tailings

Science.gov (United States)

Levei, Levente; Andrei, Mariana Lucia; Hoaghia, Maria Alexandra; Ozunu, Alexandru

2017-12-01

Dandelion (Taraxacum officinale) is one of the plant species that has the ability to spontaneously grow on mine tailings, due to its high tolerance for harsh environmental conditions (low nutrients level, high metal contents). The concentrations of Cd, Cu, Pb and Zn were determined in tailings and dandelion leaves grown on nonferrous mine tailings from Romania, while the metal accumulation was assessed by transfer factors (TFs) calculated as the ratio between the metal concentration in plant leaves and in tailings underneath. The results showed that the metal concentrations in tailings ranged between 0.4-8.0 mg/kg Cd, 20-1300 mg/kg Cu, 27-570 mg/kg Pb and 48-800 mg/kg Zn, while the metal concentrations in dandelion ranged between 0.2-4.8 mg/kg Cd, 6.2-17 mg/kg Cu, 0.5-75 mg/kg Pb and 27-260 mg/kg Zn. The TFs were below 0.8 for Cd and Zn and below 0.4 for Cu and Pb and decreased in the following order Cd≥Zn>Cu≥Pb, suggesting the Cd and Zn accumulation capability of dandelion.

Evaluation of heavy metals content in dietary supplements in Lebanon

Directory of Open Access Journals (Sweden)

Korfali Samira

2013-01-01

Full Text Available Abstract Background The consumption of dietary supplements is widely spread and on the rise. These dietary supplements are generally used without prescriptions, proper counseling or any awareness of their health risk. The current study aimed at analyzing the metals in 33 samples of imported dietary supplements highly consumed by the Lebanese population, using 3 different techniques, to ensure the safety and increase the awareness of the citizen to benefit from these dietary supplements. Results Some samples had levels of metals above their maximum allowable levels (Fe: 24%, Zn: 33%, Mn: 27%, Se: 15%, Mo: 12% of samples, but did not pose any health risk because they were below permitted daily exposure limit and recommended daily allowance except for Fe in 6% of the samples. On the other hand, 34% of the samples had Cu levels above allowable limit where 18% of them were above their permitted daily exposure and recommended daily allowance. In contrast, all samples had concentration of Cr, Hg, and Pb below allowable limits and daily exposure. Whereas, 30% of analyzed samples had levels of Cd above allowable levels, and were statistically correlated with Ca, and Zn essential minerals. Similarly 62% of the samples had levels of As above allowable limits and As levels were associated with Fe and Mn essential minerals. Conclusion Dietary supplements consumed as essential nutrients for their Ca, Zn, Fe and Mn content should be monitored for toxic metal levels due to their natural geochemical association with these essential metals to provide citizens the safe allowable amounts.

Evaluation of heavy metals content in dietary supplements in Lebanon.

Science.gov (United States)

Korfali, Samira Ibrahim; Hawi, Tamer; Mroueh, Mohamad

2013-01-18

The consumption of dietary supplements is widely spread and on the rise. These dietary supplements are generally used without prescriptions, proper counseling or any awareness of their health risk. The current study aimed at analyzing the metals in 33 samples of imported dietary supplements highly consumed by the Lebanese population, using 3 different techniques, to ensure the safety and increase the awareness of the citizen to benefit from these dietary supplements. Some samples had levels of metals above their maximum allowable levels (Fe: 24%, Zn: 33%, Mn: 27%, Se: 15%, Mo: 12% of samples), but did not pose any health risk because they were below permitted daily exposure limit and recommended daily allowance except for Fe in 6% of the samples. On the other hand, 34% of the samples had Cu levels above allowable limit where 18% of them were above their permitted daily exposure and recommended daily allowance. In contrast, all samples had concentration of Cr, Hg, and Pb below allowable limits and daily exposure. Whereas, 30% of analyzed samples had levels of Cd above allowable levels, and were statistically correlated with Ca, and Zn essential minerals. Similarly 62% of the samples had levels of As above allowable limits and As levels were associated with Fe and Mn essential minerals. Dietary supplements consumed as essential nutrients for their Ca, Zn, Fe and Mn content should be monitored for toxic metal levels due to their natural geochemical association with these essential metals to provide citizens the safe allowable amounts.

Heavy metal content (Cd, Ni, Cr and Pb) in soil amendment with a low polluted biosolid

Science.gov (United States)

Gomez Lucas, Ignacio; Lag Brotons, Alfonso; Navarro-Pedreño, Jose; Belén Almendro-Candel, Maria; Jordán, Manuel M.; Bech, Jaume; Roca, Nuria

2016-04-01

The progressively higher water quality standards in Europe has led to the generation of large quantities of sewage sludge derived from wastewater treatment (Fytili and Zabaniotou 2008). Composting is an effective method to minimize these risks, as pathogens are biodegraded and heavy metals are stabilized as a result of organic matter transformations (Barker and Bryson 2002; Noble and Roberts 2004). Most of the studies about sewage sludge pollution are centred in medium and high polluted wastes. However, the aim of this study was to assess the effects on soil heavy metal content of a low polluted sewage sludge compost in order to identify an optimal application rate based in heavy metal concentration under a period of cultivation of a Mediterranean horticultural plant (Cynara carducnculus). The experiment was done between January to June: rainfall was 71 mm, the volume of water supplied every week was 10.5 mm, mean air temperatures was 14.2, 20.4 (maximum), and 9.2◦C (minimum). The soil was a clay-loam anthrosol (WRB 2006). The experimental plot (60 m2) was divided into five subplots with five treatments corresponding to 0, 2, 4, 6, and 8 kg compost/m2. Three top-soil (first 20 cm) samples from each treatment were taken (January, April and June) and these parameters were analysed: pH, electrical conductivity, organic matter and total content of heavy metals (microwave acid digestion followed by AAS-spectrometry determination). The results show that sewage sludge compost treatments increase the organic matter content and salinity (electrical conductivity of the soils) and diminish the pH. Cd and Ni total content in top-soil was affected and both slightly reduce their concentration. Pb and Cr show minor changes. In general, the application of this low polluted compost may affect the mobility of Cd and Ni due to the pH modification and the water added by irrigation along time but Pb and Cr remain their content in the top-soil. References Barker, A.V., and G.M. Bryson

Effect of vermicomposting on calcium, sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation.

Science.gov (United States)

Das, Debabrata; Bhattacharyya, Pradip; Ghosh, B C; Banik, Pabitra

2012-01-01

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.

Preliminary observations on the metal content in some milk samples from an acid geoenvironment

Directory of Open Access Journals (Sweden)

Alhonen, P.

1997-12-01

Full Text Available The metal content of some milk samples was analyzed from areas of acid sulphate soils along the course of the river Kyrönjoki in western Finland. Comparative analyses were made with samples from the Artjärvi-Porlammi area. The variations of analyzed metals AI, Ba, Ca, Cr, Cu, Fe, K, Mg, Mo, Na, Sr and Zn are not great in both areas except that of Al, which is clearly associated with the acid environment in the Kyrönjoki valley. The portions of these elements in milk are relatively high as compared with data from literature. It is obvious that they show environmental contamination. Under acid circumstances the metals in milk may create serious geomedical problems.

Nitrogen content determinations in different stages of thermal treatment involved in conversion of ammonium diuranate to uranium metal

International Nuclear Information System (INIS)

Shrivastava, K.C.; Shelke, G.P.

2017-01-01

Determination of nitrogen content in the uranium metal and uranium oxide based reactor fuels is important to meet the requirement of specifications given by fuel designer. Therefore, a systematic study was carried out to determine the variations in nitrogen content during the conversion of ammonium diuranate (ADU) to uranium oxides (UO 3 and UO 2 ), and finally to uranium metal by inert gas fusion-thermal conductivity detection (IGF-TCD) technique. To understand the measured nitrogen content variations, the thermal decomposition study of ADU was carried out using thermogravimetry (TG)/differential thermogravimetry (DTG) and differential thermal analysis (DTA) in the temperature range of 25-1073 K. Powder X-ray diffraction (XRD) technique was used to confirm the formation of uranium oxide precursors at different temperature. (author)

Wide-scale utilization of MSWI fly ashes in cement production and its impact on average heavy metal contents in cements: The case of Austria.

Science.gov (United States)

Lederer, Jakob; Trinkel, Verena; Fellner, Johann

2017-02-01

A number of studies present the utilization of fly ashes from municipal solid waste incineration (MSWI) in cement production as a recycling alternative to landfilling. While there is a lot of research on the impact of MSWI fly ashes utilization in cement production on the quality of concrete or the leaching of heavy metals, only a few studies have determined the resulting heavy metal content in cements caused by this MSWI fly ashes utilization. Making use of the case of Austria, this study (1) determines the total content of selected heavy metals in cements currently produced in the country, (2) designs a scenario and calculates the resulting heavy metal contents in cements assuming that all MSWI fly ashes from Austrian grate incinerators were used as secondary raw materials for Portland cement clinker production and (3) evaluates the legal recyclability of demolished concretes produced from MSWI fly ash amended cements based on their total heavy metal contents. To do so, data from literature and statistics are combined in a material flow analysis model to calculate the average total contents of heavy metals in cements and in the resulting concretes according to the above scenario. The resulting heavy metal contents are then compared (i) to their respective limit values for cements as defined in a new technical guideline in Austria (BMLFUW, 2016), and (ii) to their respective limit values for recycling materials from demolished concrete. Results show that MSWI fly ashes utilization increases the raw material input in cement production by only +0.9%, but the total contents of Cd by +310%, and Hg, Pb, and Zn by +70% to +170%. However these and other heavy metal contents are still below their respective limit values for Austrian cements. The same legal conformity counts for recycling material derived from concretes produced from the MSWI fly ash cements. However, if the MSWI fly ash ratio in all raw materials used for cement production were increased from 0.9% to 22

Red cabbage yield, heavy metal content, water use and soil chemical characteristics under wastewater irrigation.

Science.gov (United States)

Tunc, Talip; Sahin, Ustun

2016-04-01

The objective of this 2-year field study was to evaluate the effects of drip irrigation with urban wastewaters reclaimed using primary (filtration) and secondary (filtration and aeration) processes on red cabbage growth and fresh yield, heavy metal content, water use and efficiency and soil chemical properties. Filtered wastewater (WW1), filtered and aerated wastewater (WW2), freshwater and filtered wastewater mix (1:1 by volume) (WW3) and freshwater (FW) were investigated as irrigation water treatments. Crop evapotranspiration decreased significantly, while water use efficiency increased under wastewater treatments compared to FW. WW1 treatment had the lowest value (474.2 mm), while FW treatments had the highest value (556.7 mm). The highest water use efficiency was found in the WW1 treatment as 8.41 kg m(-3), and there was a twofold increase with regard to the FW. Wastewater irrigation increased soil fertility and therefore red cabbage yield. WW2 treatment produced the highest total fresh yield (40.02 Mg ha(-1)). However, wastewater irrigation increased the heavy metal content in crops and soil. Cd content in red cabbage heads was above the safe limit, and WW1 treatment had the highest value (0.168 mg kg(-1)). WW3 treatment among wastewater treatments is less risky in terms of soil and crop heavy metal pollution and faecal coliform contamination. Therefore, WW3 wastewater irrigation for red cabbage could be recommended for higher yield and water efficiency with regard to freshwater irrigation.

Volume fraction dependence of transient absorption signal and nonlinearities in metal nanocolloids

International Nuclear Information System (INIS)

Jayabalan, J; Singh, Asha; Khan, Salahuddin; Chari, Rama

2013-01-01

Electron–lattice thermalization dynamics in metal nanoparticles or in bulk metal is usually estimated by measuring the decay time of the change in transmission following an optical excitation. Such measurements can be performed in transient absorption geometry using a femtosecond laser. We find that for silver nanoplatelet/water colloids, the decay time of the transient absorption depends on the volume fraction of silver in water. By estimating the volume fraction dependence of nonlinearities in the same samples, we show that the variation in the measured decay time is due to pump-depletion effects present in the sample. The correct correction factor for taking into account pump-depletion effects in fifth- and higher-order nonlinearities is also presented. (paper)

Fermi level dependent native defect formation: Consequences for metal-semiconductor and semiconductor-semiconductor interfaces

International Nuclear Information System (INIS)

Walukiewicz, W.

1988-02-01

The amphoteric native defect model of the Schottky barrier formation is used to analyze the Fermi level pinning at metal/semiconductor interfaces for submonolayer metal coverages. It is assumed that the energy required for defect generation is released in the process of surface back-relaxation. Model calculations for metal/GaAs interfaces show a weak dependence of the Fermi level pinning on the thickness of metal deposited at room temperature. This weak dependence indicates a strong dependence of the defect formation energy on the Fermi level, a unique feature of amphoteric native defects. This result is in very good agreement with experimental data. It is shown that a very distinct asymmetry in the Fermi level pinning on p- and n-type GaAs observed at liquid nitrogen temperatures can be understood in terms of much different recombination rates for amphoteric native defects in those two types of materials. Also, it is demonstrated that the Fermi level stabilization energy, a central concept of the amphoteric defect system, plays a fundamental role in other phenomena in semiconductors such as semiconductor/semiconductor heterointerface intermixing and saturation of free carrier concentration. 33 refs., 6 figs

A model for temperature dependent resistivity of metallic superlattices

Directory of Open Access Journals (Sweden)

J. I. Uba

2015-11-01

Full Text Available The temperature dependent resistivity of metallic superlattices, to first order approximation, is assumed to have same form as bulk metal, ρ(T = ρo + aT, which permits describing these structures as linear atomic chain. The assumption is, substantiated with the derivation of the above expression from the standard magnetoresistance equation, in which the second term, a Bragg scattering factor, is a correction to the usual model involving magnon and phonon scatterings. Fitting the model to Fe/Cr data from literature shows that Bragg scattering is dominant at T < 50 K and magnon and phonon coefficients are independent of experiment conditions, with typical values of 4.7 × 10−4 μΩcmK−2 and −8 ± 0.7 × 10−7μΩcmK−3. From the linear atomic chain model, the dielectric constant ε q , ω = 8 . 33 × 10 − 2 at Debye frequency for all materials and acoustic speed and Thomas – Fermi screening length are pressure dependent with typical values of 1.53 × 104 m/s and 1.80 × 109 m at 0.5 GPa pressure for an Fe/Cr structure.

Lead-210 and heavy metal contents in dated ombrotrophic peat hummocks from Finland

International Nuclear Information System (INIS)

El-Daoushy, F.; Tolonen, K.

1984-01-01

Two Sphagnum fuscum hummock cores, core 1, Kaerpaensuo bog and core F9, Kunonniemensuo bog. from Finland were used in this study. The peats are ombrotrophic and were dated using the moss-increment method. The mosses in both cores were carefully examined for their botanical composition, degree of humification, ash percentage and bulk density. The total accumulated dry peat-matter in the Kunonniemensuo core was almost double that in the Kaerpaensuo core. The total 210 Pb and the supported 210 Pb were measured by isotope dilution and the radon emanation technique. Materials in the same peat samples were analysed for their 210 Pb content at the Institute of Physics, Uppsala, Sweden and the Technical Research Centre of Finland, Espoo, Finland. The annual content of unsupported 210 Pb in the dated peat-layers shows that peat materials are effective traps which could yield information on atmospheric-fluxes both chronologically and regionally. Lead, copper, zinc, iron and manganese were also measured by flame atomic absorption spectrometry (AAS). The total accumulated amounts over the past 150 y of the heavy metals investigated are almost identical for both cores apart from manganese which is considerably higher in the Kunonniemensuo core. However, the metal profiles studied exhibit discontinuity zones more pronounced in the Kunonniemensuo core. The 210 Pb data indicate that growth rate and bulk density variations in ombrotrophic peat bogs affects the accumulation of 210 Pb and similar trace metals. (orig.)

Radionuclides and heavy metal contents in phosphogypsum samples in comparison to cerrado soils

Energy Technology Data Exchange (ETDEWEB)

Jacomino, Vanusa Maria Feliciano; Oliveira, Kerley Alberto Pereira de, E-mail: vmfj@cdtn.b, E-mail: kapo@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Taddei, Maria Helena Tirollo; Nascimento, Marcos Roberto Lopes, E-mail: mhtaddei@cnen.gov.b, E-mail: pmarcos@cnen.gov.b [Laboratorio de Pocos de Caldas (LAPOC/CNEN-MG), MG (Brazil); Siqueira, Maria Celia, E-mail: mc.ufscar@gmail.co [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Quimica; Carneiro, Maria Eleonora Deschamps Pires, E-mail: eleonora.deschamps@meioambiente.mg.gov.b [Fundacao Estadual do Meio Ambiente (FEAM), Belo Horizonte, MG (Brazil). Gestao de Residuos Solidos; Silva, David Faria da; Mello, Jaime Wilson Vargas de, E-mail: davidf.agro@hotmail.co, E-mail: jwvmello@ufv.b [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Solos

2009-09-15

Phosphogypsum (PG) or agricultural gypsum, a solid waste from the phosphate fertilizer industry, is used as soil amendment, especially on soils in the Cerrado region, in Brazil. This material may however contain natural radionuclides and metals which can be transferred to soils, plants and water sources. This paper presents and discusses the results of physical and chemical analyses that characterized samples of PG and compares them to the results found in two typical soils of the Cerrado, a clayey and sandy one. These analyses included: solid waste classification, evaluation of organic matter content and of P, K, Ca, Mg, and Al concentrations and of the mineralogical composition. Natural radionuclides and metal concentrations in PG and soil samples were also measured. Phosphogypsum was classified as Class II A - not dangerous, not inert, not corrosive and not reactive. The organic matter content in the soil samples was low and potential acidity high. In the mean, the specific {sup 226}Ra activity in the phosphogypsum samples (252 Bq kg{sup -1}) was below the maximum level recommended by USEPA, which is 370 Bq kg{sup -1} for agricultural use. In addition, this study verified that natural radionuclides and metals concentrations in PG were lower than in the clayey Oxisol of Sete Lagoas, Minas Gerais, Brazil. These results indicated that the application of phosphogypsum as soil amendment in agriculture would not cause a significant impact on the environment. (author)

Radionuclides and heavy metal contents in phosphogypsum samples in comparison to cerrado soils

International Nuclear Information System (INIS)

Jacomino, Vanusa Maria Feliciano; Oliveira, Kerley Alberto Pereira de; Taddei, Maria Helena Tirollo; Nascimento, Marcos Roberto Lopes; Siqueira, Maria Celia; Carneiro, Maria Eleonora Deschamps Pires; Silva, David Faria da; Mello, Jaime Wilson Vargas de

2009-01-01

Phosphogypsum (PG) or agricultural gypsum, a solid waste from the phosphate fertilizer industry, is used as soil amendment, especially on soils in the Cerrado region, in Brazil. This material may however contain natural radionuclides and metals which can be transferred to soils, plants and water sources. This paper presents and discusses the results of physical and chemical analyses that characterized samples of PG and compares them to the results found in two typical soils of the Cerrado, a clayey and sandy one. These analyses included: solid waste classification, evaluation of organic matter content and of P, K, Ca, Mg, and Al concentrations and of the mineralogical composition. Natural radionuclides and metal concentrations in PG and soil samples were also measured. Phosphogypsum was classified as Class II A - not dangerous, not inert, not corrosive and not reactive. The organic matter content in the soil samples was low and potential acidity high. In the mean, the specific 226 Ra activity in the phosphogypsum samples (252 Bq kg -1 ) was below the maximum level recommended by USEPA, which is 370 Bq kg -1 for agricultural use. In addition, this study verified that natural radionuclides and metals concentrations in PG were lower than in the clayey Oxisol of Sete Lagoas, Minas Gerais, Brazil. These results indicated that the application of phosphogypsum as soil amendment in agriculture would not cause a significant impact on the environment. (author)

Volume dependence of the melting temperature for alkali metals with Debye's model

International Nuclear Information System (INIS)

Soma, T.; Kagaya, H.M.; Nishigaki, M.

1983-01-01

Using the volume dependence of the Grueneisen constant at higher temperatures, the volume effect on the melting temperature of alkali metals is studied by Lindeman's melting law and Debye's model. The obtained melting curve increases as a function of the compressed volume and shows the maximum of the melting point at the characteristic volume. The resultant data are qualitatively in agreement with the observed tendency for alkali metals. (author)

Boundary-integral equation formulation for time-dependent inelastic deformation in metals

Energy Technology Data Exchange (ETDEWEB)

Kumar, V; Mukherjee, S

1977-01-01

The mathematical structure of various constitutive relations proposed in recent years for representing time-dependent inelastic deformation behavior of metals at elevated temperatues has certain features which permit a simple formulation of the three-dimensional inelasticity problem in terms of real time rates. A direct formulation of the boundary-integral equation method in terms of rates is discussed for the analysis of time-dependent inelastic deformation of arbitrarily shaped three-dimensional metallic bodies subjected to arbitrary mechanical and thermal loading histories and obeying constitutive relations of the kind mentioned above. The formulation is based on the assumption of infinitesimal deformations. Several illustrative examples involving creep of thick-walled spheres, long thick-walled cylinders, and rotating discs are discussed. The implementation of the method appears to be far easier than analogous BIE formulations that have been suggested for elastoplastic problems.

Heavy metals and metalloids in egg contents and eggshells of passerine birds from Arizona

International Nuclear Information System (INIS)

Mora, Miguel A.

2003-01-01

High concentrations of Sr in eggshells may be associated with lower hatching success of some passerine birds. - Concentrations of inorganic elements were determined in eggs of passerine birds including the endangered southwestern willow flycatcher (Empidonax traillii extimus) from four regions in Arizona. The main aim of the study was to determine the distribution of metals in egg contents and eggshells, with emphasis on the deposition of Sr in eggshells. Seventy eggs of 11 passerine species were collected at four nesting locations during 2000. Aluminum, Ba, Cr, Cu, Mn, Se, Sr, and Zn, were detected primarily in egg contents of all bird species. Arsenic, Ni, Pb, and V were detected primarily in eggshells. A proportion of most inorganic elements accumulated in the eggshell. Concentrations of Ba, Cu, Mn, Se, Sr, and Zn in egg contents and As, Ba, Cu, and V in eggshells of yellow-breasted chats (Icteria virens) were similar among locations. However, concentrations of Mn, Ni, Sr, and Zn in eggshells were significant different among locations. Except for Cu, Mn, Se, and Zn, concentrations of inorganic elements were 2-35 times greater in eggshells than in eggs. Most concentrations of metals and metalloids in eggs and eggshells of all the bird species were below levels known to affect reproduction or that have other deleterious effects. However, I found somewhat elevated concentrations of Sr in eggshells (highest mean=1505 μg/g dw, n=3) of yellow-breasted chats and willow flycatchers, and in egg contents of yellow warblers (Dendroica petechia) and song sparrows (Melospiza melodia). Whether current observed concentrations of Sr in eggshells are affecting nesting birds in Arizona remains to be determined. Strontium and other metals could be associated with lower hatching success in some areas. This study shows that a proportion of many inorganic elements accumulates in the eggshell and that the potential effects on the proper structure and functioning of the eggshell

Heavy metal (Pb, Cu, Zn and Cd content in wine produced from grape cultivar Mavrud, grown in an industrially polluted region

Directory of Open Access Journals (Sweden)

Violina Angelova

1999-09-01

Full Text Available The investigation was carried out in the period 1991-1993 with cv. Mavrud, grown in the region with a major industrial pollutant the Non-Ferrous-Metal Works (NFMW and a region with no industrial pollutants (as a control. The heavy metal content in soil, grapes and wine was determined. Most of the heavy metals in the grapes precipitate during fermentation into the sediments, which is the reason for their significantly lower content in the wine. Water washing of grape before processing leads to about 2 time decrease in the Pb, Cu, Zn and Cd contents of wine. The pre-washing of grapes does not lead to any quality deterioration in the wine produced. The amounts of Cu, Zn and Cd in the wine from cv. Mavrud, grown in the region of the NFMW-Plovdiv, are lower than the maximum admissible levels, while the Pb content exceeds them about two times.

Trace Metal Content of Sediments Close to Mine Sites in the Andean Region

Directory of Open Access Journals (Sweden)

Cristina Yacoub

2012-01-01

Full Text Available This study is a preliminary examination of heavy metal pollution in sediments close to two mine sites in the upper part of the Jequetepeque River Basin, Peru. Sediment concentrations of Al, As, Cd, Cu, Cr, Fe, Hg, Ni, Pb, Sb, Sn, and Zn were analyzed. A comparative study of the trace metal content of sediments shows that the highest concentrations are found at the closest points to the mine sites in both cases. The sediment quality analysis was performed using the threshold effect level of the Canadian guidelines (TEL. The sediment samples analyzed show that potential ecological risk is caused frequently at both sites by As, Cd, Cu, Hg, Pb, and Zn. The long-term influence of sediment metals in the environment is also assessed by sequential extraction scheme analysis (SES. The availability of metals in sediments is assessed, and it is considered a significant threat to the environment for As, Cd, and Sb close to one mine site and Cr and Hg close to the other mine site. Statistical analysis of sediment samples provides a characterization of both subbasins, showing low concentrations of a specific set of metals and identifies the main characteristics of the different pollution sources. A tentative relationship between pollution sources and possible ecological risk is established.

Effects of preparation method and active metal content on of Ni/kieselguhr catalyst activity

International Nuclear Information System (INIS)

Galuh Widiyarti; Wuryaningsih Sri Rahayu

2010-01-01

The preparation and the active metal content influence the activity of catalyst. Study has been conducted to see the activity of Ni/kieselguhr based on preparation method and Nickel (Ni) contents in the catalyst in the laboratory scale. The Ni/kieselguhr catalyst were prepared by impregnation and precipitation methods, with Ni active contents of 10, 20, and 30 % by weight. The catalysts characterization was analyzed using X-Ray Diffraction (XRD). Catalysts activities were analyzed based on decreasing of iodine number from hydrogenation of crude palm oil for 2 hours. The activity tests results show that precipitation catalysts are more active than impregnation catalysts. The decreasing in iodine number of fatty acid after 2 hours of hydrogenation process using precipitation catalysts and impregnation catalysts are 51.53 and 21.85 %, respectively. In addition, the catalysts are more active with increasing Ni contents. (author)

TRACE METAL CONTENT (Cu, Zn, Mn AND Fe) IN URTICA DIOICA L. AND PLANTAGO MAJOR L.

Science.gov (United States)

Krolak, Elzbieta; Raczuk, Jolanta; Borkowska, Lidia

2016-11-01

The aim of the study was to compare the contents of Cu, Zn, Mn and Fe in the washed and unwashed leaves and roots of two plant species: Urica dioica L. and Plantago major L., used in herbal medicine. These two herb species occur in the same environmental habitats, yet their morphological structure is different. The soil and plant samples for analyses were collected from an uncontaminated area in Eastern Poland. In each habitat location, the samples were taken from sandy soils with slightly acidic and neutral pH values. The obtained results showed that U. dioica and P. major accumulated similar amounts of trace metals, such as: Cu, Zn and Fe, in leaves, despite the differences in the morphological structure of their overground parts. The content of Mn in leaves U. dioica was about twice as much as in P. major. Also, no differences in the metal content were observed between washed and unwashed leaves of both species. However, in the same habitat conditions, a significantly higher content of Cu, Zn and Mn was found in the roots of P. major than U. dioica. The content of Fe in the roots was similar in both species. P. major and U. dioica may be a valuable source of microelements, if they are obtained from unpolluted habitats.

SDSS-IV MaNGA: environmental dependence of stellar age and metallicity gradients in nearby galaxies

Science.gov (United States)

Zheng, Zheng; Wang, Huiyuan; Ge, Junqiang; Mao, Shude; Li, Cheng; Li, Ran; Mo, Houjun; Goddard, Daniel; Bundy, Kevin; Li, Hongyu; Nair, Preethi; Lin, Lihwai; Long, R. J.; Riffel, Rogério; Thomas, Daniel; Masters, Karen; Bizyaev, Dmitry; Brownstein, Joel R.; Zhang, Kai; Law, David R.; Drory, Niv; Roman Lopes, Alexandre; Malanushenko, Olena

2017-03-01

We present a study on the stellar age and metallicity distributions for 1105 galaxies using the STARLIGHT software on MaNGA (Mapping Nearby Galaxies at APO) integral field spectra. We derive age and metallicity gradients by fitting straight lines to the radial profiles, and explore their correlations with total stellar mass M*, NUV - r colour and environments, as identified by both the large-scale structure (LSS) type and the local density. We find that the mean age and metallicity gradients are close to zero but slightly negative, which is consistent with the inside-out formation scenario. Within our sample, we find that both the age and metallicity gradients show weak or no correlation with either the LSS type or local density environment. In addition, we also study the environmental dependence of age and metallicity values at the effective radii. The age and metallicity values are highly correlated with M* and NUV - r and are also dependent on LSS type as well as local density. Low-mass galaxies tend to be younger and have lower metallicity in low-density environments while high-mass galaxies are less affected by environment.

Relationship between metal speciation in soil solution and metal adsorption at the root surface of ryegrass.

Science.gov (United States)

Kalis, Erwin J J; Temminghoff, Erwin J M; Town, Raewyn M; Unsworth, Emily R; van Riemsdijk, Willem H

2008-01-01

The total metal content of the soil or total metal concentration in the soil solution is not always a good indicator for metal availability to plants. Therefore, several speciation techniques have been developed that measure a defined fraction of the total metal concentration in the soil solution. In this study the Donnan Membrane Technique (DMT) was used to measure free metal ion concentrations in CaCl(2) extractions (to mimic the soil solution, and to work under standardized conditions) of 10 different soils, whereas diffusive gradients in thin-films (DGT) and scanning chronopotentiometry (SCP) were used to measure the sum of free and labile metal concentrations in the CaCl(2) extracts. The DGT device was also exposed directly to the (wetted) soil (soil-DGT). The metal concentrations measured with the speciation techniques are related to the metal adsorption at the root surface of ryegrass (Lolium perenne L.), to be able to subsequently predict metal uptake. In most cases the metal adsorption related pH-dependently to the metal concentrations measured by DMT, SCP, and DGT in the CaCl(2) extract. However, the relationship between metal adsorption at the root surface and the metal concentrations measured by the soil-DGT was not-or only slightly-pH dependent. The correlations between metal adsorption at the root surface and metal speciation detected by different speciation techniques allow discussion about rate limiting steps in biouptake and the contribution of metal complexes to metal bioavailability.

Metal accumulation, growth, antioxidants and oil yield of Brassica juncea L. exposed to different metals.

Science.gov (United States)

Sinha, Sarita; Sinam, Geetgovind; Mishra, Rohit Kumar; Mallick, Shekhar

2010-09-01

In agricultural fields, heavy metal contamination is responsible for limiting the crop productivity and quality. This study reports that the plants of Brassica juncea L. cv. Pusa bold grown on contaminated substrates [Cu, Cr(VI), As(III), As(V)] under simulated field conditions have shown translocation of metals to the upper part and its sequestration in the leaves without significantly affecting on oil yield, except for Cr and higher concentration of As(V), compared to control. Decrease in the oil content in As(V) treated plants was observed in a dose dependent manner; however, maximum decrease was recorded in Cr treated plants. Among all the metal treatments, Cr was the most toxic as evident from the decrease in oil content, growth parameters and antioxidants. The accumulation of metals was below the detection limit in the seeds grown on 10 and 30 mg kg(-1) As(III) and Cr(VI); 10 mg kg(-1) As(V)) and thus can be recommended only for oil cultivation. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Analysis of caffeine and heavy metal contents in branded and unbranded tea available in Pakistan

International Nuclear Information System (INIS)

Khan, S.R.; Inayat, A.; Chowdhry, M.N.; Waheed, A.

2010-01-01

In the investigation of caffeine and heavy metal contents in four branded and six unbranded tea samples collected from local markets of Lahore, Faisalabad and Peshawar, the amount of caffeine and heavy metals in all the branded tea samples were in agreement with the international standards. In unbranded tea samples, though the amount of caffeine was within standard limits but two of the samples collected from Peshawar had high concentrations of lead being, 13.69 and 15.78 mg/kg, consumption of which can lead to serious problems. (author)

Suspended matter and heavy metal content of the Elbe Estuary

International Nuclear Information System (INIS)

Vollbrecht, K.

1980-01-01

(1) In the River Elbe estuary there is a turbidity zone which is closely bound to the region of brackish waters. Its suspended matter content changes strongly with the tidal rhythm. Suspended matter and river bed sediments influence each other by exchanging their particles. Owing to that mechanism, the heavy metal ions bound or taken up by the suspended matter (sorption) enter the sediments. To obtain an estimation of the estuary's ability to cope with ( self purify ) a strong burden of industrial wastes, it is neccessary to take into consideration the absorbing capacity of both the mean suspension load and the sediments. (2) The concentration of nearly all heavy metal ions investigated in the suspension load decreases remarkably at the very beginning of the turbid zone already, in the Hamburg region. It indicates that the binding process are going on very rapidly and that the metal ion absorbing capacity of the Elbe estuary still requires only the first few miles of this self purification system. The results gained indicate that the suspended matter in Hamburg waters could bind or take up more heavy metal ions than are discharged into this area. (3) The concentration of most ions bound to the suspension material correlates very well with the grain size distribution of the (anorganic) particles. The concentration values decrease along the estuary and lead to a continuous transition to the values of the open sea. Cu, Ni and Cd appear to be captured preferably by organic suspended matter. This behaviour, however, is solely restricted to the turbid zone. In the open sea, after oxidation of the binding organic material, Cu and Ni correspond to the anorganic grain size distribution. (orig./HP) [de

Heavy Metal Content in Selected Flavouring Plants and in Ultra-Basic Soil of Felda Rokan Barat, Negeri Sembilan, Malaysia

International Nuclear Information System (INIS)

Sahibin Abdul Rahim; Wan Mohd Razi Idris; Zulfahmi Ali Rahman; Tukimat Lihan; Ramlan Omar; Yan, L.K.

2012-01-01

A study was carried out at an ultra basic soil area in Felda Rokan Barat (FRB), Negeri Sembilan. Twenty plants of samples namely chili, turmeric, pandan and lemon grass were collected randomly for the determination of heavy metal contents such as Fe, Cd, Co, Cu, Mn, Ni, Pb, Cr and Zn. Heavy metals in plants were extracted by wet digestion method, whereas available and resistant heavy metals in soil were extracted by sequential extraction. Total heavy metals content in the soil were obtained by summation of resistant and available heavy metals. Heavy metals content in soil and plant extract were determined by using the Flame Atomic Absorption Spectrophotometer (FAAS). Results showed that Fe was the dominant composition in soil in the study area while Cd concentration was very low with values of < 10 mg/ kg. The range of heavy metals concentration in soils were Fe (2618.4 to 4248 mg/ kg), Mn (240.9 to 741.9 mg/ kg), Zn (81.9 to 324.8 mg/ kg), Cr (46.8 to 438.7 mg/ kg), Cu (15.7 to 81.7 mg/ kg), Pb (14.9 to 116.8 mg/ kg), Ni (10.1 to 545.6 mg/ kg), Cd (5.6 to 10.6 mg/ kg) dan Co (0.8 to 126.1 mg/ kg). Available Fe recorded the highest value in all of the plant substrates followed by Mn, Zn, Pb, Ni, Cr, Cu, Co and Cd. Based on percentage of availability Mn, Pb and Zn are considered most available by plant with availability percentage of 8 to 10 %. Concentration of Fe, Mn, Ni and Zn were high in all parts of plants compared to the other metals. The value of biological absorption coefficient (BAC) in chili, turmeric, pandan and lemon grass were in the range of 0.02-0.36, 0.03-0.41, 0.03-0.63 and 0.03-1.15, respectively. It can be concluded that the uptake of heavy metals by plants were normal even though the heavy metals concentration in the ultra basic soil was high. (author)

Dependence of the Rossby number on helium and metal abundances

International Nuclear Information System (INIS)

Rucinski, S.M.; Vandenberg, D.A.

1990-01-01

Convective turnover times, tau, are calculated for solar-type stars of the zero-age main-sequence models of VandenBerg and Poll (1989) with helium abundances = 0.22, 0.27, and 0.32 and metal abundances = 0.0169, 0.024, and 0.03. Emphasis is given to the possible dependence of turnover times on the chemical composition of a star. It is found that deviations in log tau from a mean dependence on the (B-V) color are less than + or - 0.1. Thus, the predicted shape of the log tau vs. (B-V) relation is quite robust. 15 refs

Pigments content in Сhlorella vulgaris under the influence of the sodium selenite and the ions of metals

Directory of Open Access Journals (Sweden)

O. I. Bodnar

2016-01-01

Full Text Available We investigated the content of pigments in Chlorella vulgaris Beij. (Chlorophyta under the influence of sodium selenite in concentrations based on Se4+ 0.5, 5.0, 10.0 and 20.0 mg/dm3 during one, three and seven days and under the influence of the simultaneous action of selenite in concentrations 10 mg Se4+/dm3 and ions of Zn2+, Mn2+, Co2+,Cu2+, Fe3+ in concentrations 5.00, 0.25, 0.05, 0.008 and 0.002 mg/dm3over seven days. This research was carried out to establish the conditions for obtaining algal lipidis substance enriched with selenium and biogenic metals in the aquaculture. The content of pigments was determined spectrophotometrically, the cellular walls were separatedby centrifuge in the percoll gradient and investigated microscopically. The pigments content in the Ch. vulgaris increased by 1.5–2.5 times in comparison with the control sample under the influence of 10 mg Se4+/dm3 with and without metal ions, in all variants of experimental influence due to binding of SeО32– with proteins and lipids. We found that selenium was included in all lipid fractions (triacylglycerols, dyacylglycerols, phospholipids, nonetherified fatty acids; the maximum amount of selenium-containing lipids wasrecorded in chloroplasts. The increase in the contents of carotenoids caused by the actions of experimental factors played an exceptional role in the mechanism of antioxidant protection that prevents destruction of chlorophyll and, accordingly, increases its amount in cells. Changes in the functioning of the photosynthetic apparatus of Ch. vulgaris affect the whole complex of metabolic transformation. Thus, the successful cultivation of chlorella, enriched with selenium and biogenic metals, is possible within seven days under the influence of 10 mg Se4+/dm3 and the above-mentioned concentration of metal ions.

Heavy Metal Contents and Physical Parameters of Aegiceras corniculatum, Brassica juncea, and Litchi chinensis Honeys from Bangladesh

Directory of Open Access Journals (Sweden)

Nandita Sarker

2015-01-01

Full Text Available The present study was undertaken to determine the heavy metal levels and the physicochemical parameters (pH, electrical conductivity (EC, and ash, moisture, and total sugar content of honeys from Bangladesh. Three different floral honeys were investigated, namely, khalsi (Aegiceras corniculatum, mustard (Brassica juncea, and litchi (Litchi chinensis honeys. The heavy metals in the honeys were determined by using a High Temperature Dry Oxidation method followed by Atomic Absorption Spectroscopy. The mean pH, EC, and ash, moisture, and total sugar contents of the investigated honeys were 3.6, 0.51 mS/cm, 0.18%, 18.83%, and 68.30%, respectively. Iron was the most abundant among all the investigated heavy metals, ranging from 13.51 to 15.44 mg/kg. The mean concentrations of Mn and Zn in the investigated honeys were 0.28 mg/kg and 2.99 mg/kg, respectively. Cd was below the detection limit, and lead was found in some honey samples, but their contents were below the recommended Maximum Acceptable Level. Cr was also found in all of the samples, but its concentration was within the limit. The physicochemical analysis of the honey samples yielded levels within the limits set by the international honey legislation, indicating that the honey samples were of good quality and had acceptable values for maturity, purity, and freshness.

Biosolids and heavy metals in soils

Directory of Open Access Journals (Sweden)

Silveira Maria Lucia Azevedo

2003-01-01

Full Text Available The application of sewage sludge or biosolids on soils has been widespread in agricultural areas. However, depending on their characteristics, they may cause increase in heavy metal concentration of treated soils. In general, domestic biosolids have lower heavy metal contents than industrial ones. Origin and treatment method of biosolids may markedly influence their characteristics. The legislation that controls the levels of heavy metal contents in biosolids and the maximum concentrations in soils is still controversial. In the long-term, heavy metal behavior after the and of biosolid application is still unknown. In soils, heavy metals may be adsorbed via specific or non-specific adsorption reactions. Iron oxides and organic matter are the most important soil constituents retaining heavy metals. The pH, CEC and the presence of competing ions also affect heavy metal adsorption and speciation in soils. In solution, heavy metals can be present either as free-ions or complexed with organic and inorganic ligands. Generally, free-ions are more relevant in environmental pollution studies since they are readily bioavailable. Some computer models can estimate heavy metal activity in solution and their ionic speciation. Thermodynamic data (thermodynamic stability constant, total metal and ligand concentrations are used by the GEOCHEM-PC program. This program allows studying heavy metal behavior in solution and the effect of changes in the conditions, such as pH and ionic strength and the application of organic and inorganic ligands caused by soil fertilization.

The use of heavy metal accumulating plants for detoxication of chemically polluted soils

Directory of Open Access Journals (Sweden)

Jacek Antonkiewicz

2004-01-01

Full Text Available The studies conducted from 1997 to 1999 in a vegetation hall were performed as a pot experiment on ordinary silt soil. Jerusalem artichoke, maize, Sida hermaphrodita Rusby, amaranth and hemp were used as indicator plants. The results confirmed, great diversification of the element contents which depends not only on the species but also on the part of individual plants. Analysis of the data revealed also another dependence: increased concentration of heavy metals in the soil corresponded to a higher content of heavy metals in the plants. Significant differences in this respect were observed for the plant species grown in unpolluted or differently contaminated soil.

Relations between variously available fractions of trace metals in the soil and their actual plant-uptake

International Nuclear Information System (INIS)

Bujtas, K.; Csillag, J.

1999-01-01

In a pot experiment, availabilities of Cd, Cr, Ni, Pb, and Zn added to the soil as metal nitrates or as enrichment of sewage sludge were evaluated by comparing concentrations of their total potentially available, presumably plant-available and directly plant-available forms in the soil. At excessively increasing soil contamination, the plant-available concentrations increased more than the total soil contents, thus the relative availabilities of the metals increased. This was reflected in the amounts taken up by the young maize test plants and in the plant/soil transfer factors. Transfer factors calculated for the 'plant-available' soil metal contents depended less on the contamination level than those based on total soil metal contents. Refs. 8 (author)

Atomistic Origin of Rate-Dependent Serrated Plastic Flow in Metallic Glasses

Directory of Open Access Journals (Sweden)

Yao YG

2008-01-01

Full Text Available Abstract Nanoindentation simulations on a binary metallic glass were performed under various strain rates by using molecular dynamics. The rate-dependent serrated plastic flow was clearly observed, and the spatiotemporal behavior of its underlying irreversible atomic rearrangement was probed. Our findings clearly validate that the serration is a temporally inhomogeneous characteristic of such rearrangements and not directly dependent on the resultant shear-banding spatiality. The unique spatiotemporal distribution of shear banding during nanoindentation is highlighted in terms of the potential energy landscape (PEL theory.

Size and shape dependent lattice parameters of metallic nanoparticles

International Nuclear Information System (INIS)

Qi, W. H.; Wang, M. P.

2005-01-01

A model is developed to account for the size and shape dependent lattice parameters of metallic nanoparticles, where the particle shape difference is considered by introducing a shape factor. It is predicted that the lattice parameters of nanoparticles in several nanometers decrease with decreasing of the particle size, which is consistent with the corresponding experimental results. Furthermore, it is found that the particle shape can lead to 10% of the total lattice variation. The model is a continuous media model and can deal with the nanoparticles larger than 1 nm. Since the shape factor approaches to infinity for nanowires and nanofilms, therefore, the model cannot be generalized to the systems of nanowires and nanofilms. For the input parameters are physical constants of bulk materials, therefore, the present model may be used to predict the lattice variation of different metallic nanoparticles with different lattice structures

Temperature-dependent thermo-elastic properties of s-, p- and d-block liquid metals

International Nuclear Information System (INIS)

Singh, R.N.; Arafin, S.; George, A.K.

2007-01-01

Thermodynamic relations involving experimentally known physical quantities are used to determine the ratio of specific heats, γ, for s-block (Na, K, Rb, Cs, Mg), d-block (Fe, Co, Ni, Cu, Ag, Au, Zn, Cd, Hg,) and p-block (Al, Ga, In, Tl, Sn, Pb, Sb, Bi, Se, Te) liquid metals. γ is further utilized to determine reliable values for the isothermal compressibility (κ T ) and the specific heat at constant volume (C V ) for these liquid metals near and above the melting temperatures. These data are of considerable significance for various thermo-physical analysis of liquid metals. We have also evaluated the Grueneisen function and its temperature dependence to establish the correlation between the thermal expansion and the elastic response to thermally induced stress. The values of acoustic impedance for liquid metals are evaluated and its physical significance is discussed for the transmission of elastic waves across metallic interfaces

MINERALS, MICROELEMENTS AND POLYPHENOLS CONTENT IN THE SOYBEAN VARIETIES GROWN IN DIFFERENT LOCALITIES OF SLOVAKIA

Directory of Open Access Journals (Sweden)

Mária Timoracká

2015-02-01

Full Text Available The aim of this study was to evaluate the influence of the grown locality on minerals and risky metal intake from the soil and on polyphenols formation in the soybean seeds. The research was realised in five localities of Slovakia using the seven soybean varieties. From the point of the soil hygiene, all determined values of heavy metals content in soils were lower than given hygienic limits, with the exception of Cd. Minerals and heavy metals contents in the soybean samples show significant differences between cultivars and localities. The values show imbalance between the potassium contents and other minerals. The order of the elements levels was determined as following: Fe > Zn > Mn > Cu > Ni > Pb > Cr ≈ Co > Cd. The risky elements contents, with exception of Cd, Cu, Pb and Ni content (only in some localities, did not exceed a limit for legumes by Food Codex SR. The total polyphenols content ranged from 817.6 to 1281.0 μg eq. tannic acid/g and suggest the variety dependence, but the locality influence was not significantly confirmed.

Uranium metal and uranium dioxide powder and pellets - Determination of nitrogen content - Method using ammonia-sensing electrode. 1. ed.

International Nuclear Information System (INIS)

1994-01-01

This International Standard specifies an analytical method for determining the nitrogen content in uranium metal and uranium dioxide powder and pellets. It is applicable to the determination of nitrogen, present as nitride, in uranium metal and uranium dioxide powder and pellets. The concentration range within which the method can be used is between 9 μg and 600 μg of nitrogen per gram. Interference can occur from metals which form complex ammines, but these are not normally present in significant amounts

Heavy metals content in acid mine drainage at abandoned and active mining area

Science.gov (United States)

Hatar, Hazirah; Rahim, Sahibin Abd; Razi, Wan Mohd; Sahrani, Fathul Karim

2013-11-01

This study was conducted at former Barite Mine, Tasik Chini and former iron mine Sungai Lembing in Pahang, and also active gold mine at Lubuk Mandi, Terengganu. This study was conducted to determine heavy metals content in acid mine drainage (AMD) at the study areas. Fourteen water sampling stations within the study area were chosen for this purpose. In situ water characteristic determinations were carried out for pH, electrical conductivity (EC), redox potential (ORP) and total dissolved solid (TDS) using multi parameter YSI 556. Water samples were collected and analysed in the laboratory for sulfate, total acidity and heavy metals which follow the standard methods of APHA (1999) and HACH (2003). Heavy metals in the water samples were determined directly using Inductive Coupled Plasma Mass Spectrometry (ICP-MS). Data obtained showed a highly acidic mean of pH values with pH ranged from 2.6 ± 0.3 to 3.2 ± 0.2. Mean of electrical conductivity ranged from 0.57 ± 0.25 to 1.01 ± 0.70 mS/cm. Redox potential mean ranged from 487.40 ± 13.68 to 579.9 ± 80.46 mV. Mean of total dissolved solids (TDS) in AMD ranged from 306.50 ± 125.16 to 608.14 ± 411.64 mg/L. Mean of sulfate concentration in AMD ranged from 32.33 ± 1.41 to 207.08 ± 85.06 mg/L, whereas the mean of total acidity ranged from 69.17 ± 5.89 to 205.12 ± 170.83 mgCaCO3/L. Heavy metals content in AMD is dominated by Fe, Cu, Mn and Zn with mean concentrations range from 2.16 ± 1.61 to 36.31 ± 41.02 mg/L, 0.17 ± 0.13 to 11.06 ± 2.85 mg/L, 1.12 ± 0.65 to 7.17 ± 6.05 mg/L and 0.62 ± 0.21 to 6.56 ± 4.11 mg/L, respectively. Mean concentrations of Ni, Co, As, Cd and Pb were less than 0.21, 0.51, 0.24, 0.05 and 0.45 mg/L, respectively. Significant correlation occurred between Fe and Mn, Cu, Zn, Co and Cd. Water pH correlated negatively with all the heavy metals, whereas total acidity, sulfate, total dissolved solid, and redox potential correlated positively. The concentration of heavy metals in the AMD

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment-A Case Study of Yanta District in Xi'an.

Science.gov (United States)

Shao, Tianjie; Pan, Lihuan; Chen, Zhiqing; Wang, Ruiyuan; Li, Wenjing; Qin, Qing; He, Yuran

2018-02-25

Taking Yanta District in Xi'an as the research object, the present study measures the contents of Cadmium (Cd), Lead (Pb), Copper (Cu), Nickel (Ni), and Chromium (Cr) in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi'an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi'an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower.

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment—A Case Study of Yanta District in Xi’an

Directory of Open Access Journals (Sweden)

Tianjie Shao

2018-02-01

Full Text Available Taking Yanta District in Xi’an as the research object, the present study measures the contents of Cadmium (Cd, Lead (Pb, Copper (Cu, Nickel (Ni, and Chromium (Cr in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi’an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi’an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower.

Content of Heavy Metal in the Dust of Leisure Squares and Its Health Risk Assessment—A Case Study of Yanta District in Xi’an

Science.gov (United States)

Shao, Tianjie; Pan, Lihuan; Chen, Zhiqing; Wang, Ruiyuan; Li, Wenjing; Qin, Qing; He, Yuran

2018-01-01

Taking Yanta District in Xi’an as the research object, the present study measures the contents of Cadmium (Cd), Lead (Pb), Copper (Cu), Nickel (Ni), and Chromium (Cr) in dust samples and further assesses the health risk of heavy metals intake through dust based on the assessment method of human exposure risk proposed by U.S. EPA, with an aim to investigate the content of heavy metal in the dust of leisure squares and its exposure risk. As the results indicate, the average contents of five heavy metals are obviously higher than the soil background value in Shaanxi Province. Therefore, Cd, Ni, Cu, Pb, and Cr are obviously enriched in urban surface dust in Shaanxi Province, due to the influence of human activities. In addition, it can also be found that the non-carcinogen exposure risk in children is significantly higher than that in adults with the risk values of these five heavy metals all one order of magnitude higher than those of adults. Irrespective of whether addressing the results for children or adults, the non-carcinogen exposure doses of five heavy metals are sorted as Cr > Pb > Cu > Ni > Cd. According to the present situation, for a child, the total non-carcinogenic risk values of five heavy metals have exceeded the safety limit in 11 of the 20 leisure squares in Yanta District of Xi’an. That means the leisure squares are no longer suitable for physical and recreational activities. For the five heavy metals, the average non-carcinogenic risk value of Cr is largest, and causes the largest threat to health in Yanta District, Xi’an. The carcinogenic exposure doses of the heavy metals Cr, Cd, and Ni are very low in respiratory pathways and there is no carcinogenic health risk. In general, the Cr content in dust in domestic cities is higher than that of foreign cities; however, the Pb content is much lower. PMID:29495319

Determination of metals content from wines by inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Iordache, Andreea-Maria; Geana, Elisabeta-Irina

2009-01-01

Full text: Wine is a widely consumed beverage with thousands of years of tradition. Wine composition strongly determines its quality besides having a great relevance on wine characterization, tipyfication and frauds detection. Wine composition is influenced by many and diverse factors corresponding to the specific production area, such as grape variety, soil and climate, culture, yeast, winemaking practices, transport and storage. Daily consumption of wine in moderate quantities contributes significantly to the requirements of the human organism for essential elements such as Cr, Cu, Zn, Fe, Mn, Co, Ni and Sr. On the other hand, several metals, such as Pb and Cd , are known to be potentially toxic. The objective of this work was to develop a method to determine the metals content in wine samples from Romania. Three samples of difference white wines available in the supermarket was analyzed for identify the presence of: Cr, Cu, Zn, Fe, Mn, Pb, Cd, Co, Ni and Sr by inductively coupled plasma mass spectrometry (ICP-MS). (authors)

Reverse osmosis influence over the content of metals and organic acids in low alcoholic beverages

Directory of Open Access Journals (Sweden)

Andrieş Mitică Tiberiu

2017-01-01

Full Text Available Wine is defined as an alcoholic beverage resulted from fermentation of grape must, having ethanol content higher than 8.5% (v/v. Wine consumption has health benefits related to the high concentration of polyphenolic compounds with antioxidant activity and cardiovascular protection effects. However, the alcohol content restricts wine consumption, but wines with low-alcohol content can be obtained with the help of the dealcoholisation process, after it was produced through alcoholic fermentation. The purpose of this work is to evaluate the organic acid concentration, metal content and other physical-chemical parameters of low alcoholic beverages obtained from grape must by a process which involves reverse osmosis, mixing in a variable ratio the permeate and concentrate and then fermentation. For the experiments, a Muscat Ottonel grape must from Iaşi vineyard was used. There were ten variants of beverages (wines with low alcoholic concentration, by mixing known quantities of the two phases resulting from the reverse osmosis process. These beverages (wines had an alcoholic concentration starting from 2.5% (v/v in the first variant, up to 7% (v/v in the tenth variant. Alcoholic concentration varies for each variant by 0.5% (v/v. After fermentation in 50 L stainless steel tanks, the samples were filtered with 0.45μm sterile membrane and bottled in 0.75 L glass bottles. After 2 months of storage at constant temperature, the beverage samples were analyzed to determine the metal content (AAS method, organic acids concentration (HPLC method, and other physical-chemical characteristics (OIV standard methods. The results obtained indicate that the very complex physical-chemical composition of the low alcoholic beverages analyzed is influenced by the specific chemical composition of a given grape must, as well as by the use of products obtained from reverse osmosis.

On the necessity of composition-dependent low-temperature opacity in models of metal-poor asymptotic giant branch stars

Energy Technology Data Exchange (ETDEWEB)

Constantino, Thomas; Campbell, Simon; Lattanzio, John [Monash Centre for Astrophysics, School of Mathematical Sciences, Monash University, Victoria 3800 (Australia); Gil-Pons, Pilar, E-mail: thomas.constantino@monash.edu [Department of Applied Physics, Polytechnic University of Catalonia, 08860 Barcelona (Spain)

2014-03-20

The vital importance of composition-dependent low-temperature opacity in low-mass (M ≤ 3 M {sub ☉}) asymptotic giant branch (AGB) stellar models of metallicity Z ≥ 0.001 has recently been demonstrated. Its significance to more metal-poor, intermediate-mass (M ≥ 2.5 M {sub ☉}) models has yet to be investigated. We show that its inclusion in lower-metallicity models ([Fe/H] ≤–2) is essential and that there exists no threshold metallicity below which composition-dependent molecular opacity may be neglected. We find it to be crucial in all intermediate-mass models investigated ([Fe/H] ≤–2 and 2.5 ≤ M/M {sub ☉} ≤ 5), because of the evolution of the surface chemistry, including the orders of magnitude increase in the abundance of molecule-forming species. Its effect on these models mirrors that previously reported for higher-metallicity models—increase in radius, decrease in T {sub eff}, faster mass loss, shorter thermally pulsing AGB lifetime, reduced enrichment in third dredge-up products (by a factor of 3-10), and an increase in the mass limit for hot bottom burning. We show that the evolution of low-metallicity models with composition-dependent low-temperature opacity is relatively independent of initial metal abundance because its contribution to the opacity is far outweighed by changes resulting from dredge-up. Our results imply a significant reduction in the expected number of nitrogen-enhanced metal-poor stars, which may help explain their observed paucity. We note that these findings are partially a product of the macrophysics adopted in our models, in particular, the Vassiliadis and Wood mass loss rate which is strongly dependent on radius.

Blackberry wines mineral and heavy metal content determination after dry ashing: multivariate data analysis as a tool for fruit wine quality control.

Science.gov (United States)

Amidžić Klarić, Daniela; Klarić, Ilija; Mornar, Ana; Velić, Darko; Velić, Natalija

2015-08-01

This study brings out the data on the content of 21 mineral and heavy metal in 15 blackberry wines made of conventionally and organically grown blackberries. The objective of this study was to classify the blackberry wine samples based on their mineral composition and the applied cultivation method of the starting raw material by using chemometric analysis. The metal content of Croatian blackberry wine samples was determined by AAS after dry ashing. The comparison between an organic and conventional group of investigated blackberry wines showed statistically significant difference in concentrations of Si and Li, where the organic group contained higher concentrations of these compounds. According to multivariate data analysis, the model based on the original metal content data set finally included seven original variables (K, Fe, Mn, Cu, Ba, Cd and Cr) and gave a satisfactory separation of two applied cultivation methods of the starting raw material.

MATERIAL DEPENDENCE OF TEMPERATURE DISTRIBUTION IN MULTI-LAYER MULTI-METAL COOKWARE

Directory of Open Access Journals (Sweden)

MOHAMMADREZA SEDIGH

2017-09-01

Full Text Available Laminated structure is becoming more popular in cookware markets; however, there seems to be a lack of enough scientific studies to evaluate its pros and cons, and to show that how it functions. A numerical model using a finite element method with temperature-dependent material properties has been performed to investigate material and layer dependence of temperature distribution in multi-layer multi-metal plate exposed to irregular heating. Behavior of two parameters including mean temperature value and uniformity on the inner surface of plate under variations of thermal properties and geometrical conditions have been studied. The results indicate that conductive metals used as first layer in bi-layer plates have better thermal performance than those used in the second layer. In addition, since cookware manufacturers increasingly prefer to use all-clad aluminium plate, recently, this structure is analysed in the present study as well. The results show all-clad copper and aluminum plate possesses lower temperature gradient compared with single layer aluminum and all-clad aluminum core plates.

Superplastic Creep of Metal Nanowires From Rate-Dependent Plasticity Transition.

Science.gov (United States)

Tao, Weiwei; Cao, Penghui; Park, Harold S

2018-04-30

Understanding the time-dependent mechanical behavior of nanomaterials such as nanowires is essential to predict their reliability in nanomechanical devices. This understanding is typically obtained using creep tests, which are the most fundamental loading mechanism by which the time-dependent deformation of materials is characterized. However, due to existing challenges facing both experimentalists and theorists, the time-dependent mechanical response of nanowires is not well-understood. Here, we use atomistic simulations that can access experimental time scales to examine the creep of single crystal FCC metal (Cu, Ag, Pt) nanowires. We report that both Cu and Ag nanowires show significantly increased ductility and superplasticity under low creep stresses, where the superplasticity is driven by a rate-dependent transition in defect nucleation from twinning to trailing partial dislocations at the micro or millisecond timescale. The transition in deformation mechanism also governs a corresponding transition in the stress-dependent creep time at the microsecond (Ag) and millisecond (Cu) timescales. Overall, this work demonstrates the necessity of accessing timescales that far exceed those seen in conventional atomistic modeling for accurate insights into the time-dependent mechanical behavior and properties of nanomaterials.

Correlation between temperature dependence of elastic moduli and Debye temperature of paramagnetic metal

International Nuclear Information System (INIS)

Bodryakov, V.Yu.; Povzner, A.A.

2000-01-01

The correlation between the temperature dependence of elastic moduli and the Debye temperature of paramagnetic metal is analyzed in neglect of the temperature dependence of the Poison coefficient σ within the frames of the Debye-Grueneisen presentations. It is shown, that namely the temperature dependence of the elastic moduli determines primarily the temperature dependence of the Debye temperature Θ(T). On the other hand, the temperature dependence Θ(T) very weakly effects the temperature dependence of the elastic moduli. The later made it possible to formulate the self-consistent approach to calculation of the elastic moduli temperature dependence. The numerical estimates of this dependence parameters are conducted by the example of the all around compression modulus of the paramagnetic lutetium [ru

HEAVY METALS (Ni, Cu, Zn AND Cd CONTENT IN SERUM OF RAT FED GREEN MUSSELS

Directory of Open Access Journals (Sweden)

Muhammad Yudhistira Azis

2015-11-01

Full Text Available Green mussel (Perna viridis can playing role as bio-indicator or biomonitoring agent for heavy-metalcontaminations in the sea. In this research, the concentrations of four elements Ni, Cu, Zn and Cd in P. viridis and in the serum of rat which orally feed by P. viridis were determined by Atomic Absorption Spectrometry (AAS following dry acid digestion. Parameter analysis was evaluated by determining confidence limit for the obtained results. The result showed that there was a sequence of heavy-metal content in green mussels sample and laboratory rats serum, such as Ni < Cd < Cu < Zn. Keywords: heavy metals, green mussels, laboratory rats serum, AAS

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

Energy Technology Data Exchange (ETDEWEB)

Karahan, Aydin, E-mail: karahan@mit.edu [Center for Advanced Nuclear Energy Systems, Nuclear Science and Engineering Department, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge MA 24-204 (United States)

2011-07-15

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

Science.gov (United States)

Karahan, Aydın

2011-07-01

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Extending FEAST-METAL for analysis of low content minor actinide bearing and zirconium rich metallic fuels for sodium fast reactors

International Nuclear Information System (INIS)

Karahan, Aydin

2011-01-01

Computational models in FEAST-METAL fuel behaviour code have been upgraded to simulate minor actinide bearing zirconium rich metallic fuels for use in sodium fast reactors. Increasing the zirconium content to 20-40 wt.% causes significant changes in fuel slug microstructure affecting thermal, mechanical, chemical, and fission gas behaviour. Inclusion of zirconium rich phase reduces the fission gas swelling rate significantly in early irradiation. Above the threshold fission gas swelling, formation of micro-cracks, and open pores increase material compliancy enhance diffusivity, leading to rapid fuel gas swelling, interconnected porosity development and release of the fission gases and helium. Production and release of helium was modelled empirically as a function of americium content and fission gas production, consistent with previous Idaho National Laboratory studies. Predicted fuel constituent redistribution is much smaller compared to typical U-Pu-10Zr fuel operated at EBR-II. Material properties such as fuel thermal conductivity, modulus of elasticity, and thermal expansion coefficient have been approximated using the available database. Creep rate and fission gas diffusivity of high zirconium fuel is lowered by an order of magnitude with respect to the reference low zirconium fuel based on limited database and in order to match experimental observations. The new code is benchmarked against the AFC-1F fuel assembly post irradiation examination results. Satisfactory match was obtained for fission gas release and swelling behaviour. Finally, the study considers a comparison of fuel behaviour between high zirconium content minor actinide bearing fuel and typical U-15Pu-6Zr fuel pins with 75% smear density. The new fuel has much higher fissile content, allowing for operating at lower neutron flux level compared to fuel with lower fissile density. This feature allows the designer to reach a much higher burnup before reaching the cladding dose limit. On the other

Model evaluation of plant metal content and biomass yield for the phytoextraction of heavy metals by switchgrass.

Science.gov (United States)

Chen, Bo-Ching; Lai, Hung-Yu; Juang, Kai-Wei

2012-06-01

To better understand the ability of switchgrass (Panicum virgatum L.), a perennial grass often relegated to marginal agricultural areas with minimal inputs, to remove cadmium, chromium, and zinc by phytoextraction from contaminated sites, the relationship between plant metal content and biomass yield is expressed in different models to predict the amount of metals switchgrass can extract. These models are reliable in assessing the use of switchgrass for phytoremediation of heavy-metal-contaminated sites. In the present study, linear and exponential decay models are more suitable for presenting the relationship between plant cadmium and dry weight. The maximum extractions of cadmium using switchgrass, as predicted by the linear and exponential decay models, approached 40 and 34 μg pot(-1), respectively. The log normal model was superior in predicting the relationship between plant chromium and dry weight. The predicted maximum extraction of chromium by switchgrass was about 56 μg pot(-1). In addition, the exponential decay and log normal models were better than the linear model in predicting the relationship between plant zinc and dry weight. The maximum extractions of zinc by switchgrass, as predicted by the exponential decay and log normal models, were about 358 and 254 μg pot(-1), respectively. To meet the maximum removal of Cd, Cr, and Zn, one can adopt the optimal timing of harvest as plant Cd, Cr, and Zn approach 450 and 526 mg kg(-1), 266 mg kg(-1), and 3022 and 5000 mg kg(-1), respectively. Due to the well-known agronomic characteristics of cultivation and the high biomass production of switchgrass, it is practicable to use switchgrass for the phytoextraction of heavy metals in situ. Copyright © 2012 Elsevier Inc. All rights reserved.

Peroxide reduction by a metal-dependent catalase in Nostoc punctiforme (cyanobacteria).

Science.gov (United States)

Hudek, L; Torriero, A A J; Michalczyk, A A; Neilan, B A; Ackland, M L; Bräu, Lambert

2017-05-01

This study investigated the role of a novel metal-dependent catalase (Npun_R4582) that reduces hydrogen peroxide in the cyanobacterium Nostoc punctiforme. Quantitative real-time PCR showed that npun_R4582 relative mRNA levels were upregulated by over 16-fold in cells treated with either 2 μM added Co, 0.5 μM added Cu, 500 μM Mn, 1 μM Ni, or 18 μM Zn. For cells treated with 60 μM H 2 O 2 , no significant alteration in Npun_R4582 relative mRNA levels was detected, while in cells treated with Co, Cu, Mn, Ni, or Zn and 60 μM peroxide, relative mRNA levels were generally above control or peroxide only treated cells. Disruption or overexpression of npun_R4582 altered sensitivity to cells exposed to 60 μM H 2 O 2 and metals for treatments beyond the highest viable concentrations, or in a mixed metal solution for Npun_R4582 - cells. Moreover, overexpression of npun_R4582 increased cellular peroxidase activity in comparison with wild-type and Npun_R4582 - cells, and reduced peroxide levels by over 50%. The addition of cobalt, manganese, nickel, and zinc increased the capacity of Npun_R4582 to reduce the rate or total levels of peroxide produced by cells growing under photooxidative conditions. The work presented confirms the function of NpunR4582 as a catalase and provides insights as to how cells reduce potentially lethal peroxide levels produced by photosynthesis. The findings also show how trace elements play crucial roles as enzymatic cofactors and how the role of Npun_R4582 in hydrogen peroxide breakdown is dependent on the type of metal and the level available to cells.

CONTENT OF SELECTED HEAVY METALS IN NI-CONTAMINATED SOIL FOLLOWING THE APPLICATION OF HALLOYSITE AND ZEOLITE

Directory of Open Access Journals (Sweden)

Maja Radziemska

2016-07-01

Full Text Available Nickel has been listed as a priory control pollutant by the United States Environmental Protection Agency (US EPA. Compared with other methods, the combination of vegetation and the addition of mineral sorbents to heavy metal-contaminated soils can be readily applied on a large scale because of the simplicity of technology and low cost. Halloysite and zeolite, among others, can be used for this purpose. A greenhouse study was performed to evaluate the feasibility of using natural zeolite, as well as raw and modified halloysite for the remediation of simulated Ni-contaminated soil. The soil was spiked with five doses of nickel, i.e. 0 (control, 80, 160, 240 and 320 mg Ni kg-1 soil. The average accumulation of heavy metals in nickel-contaminated soil was found to follow the decreasing order of Ni>Zn>Cr>Cu>Pb. The highest reduction of Pb content was observed in soil samples taken from pots containing 80 and 160 mg.kg-1 of Ni along with the addition of modified halloysite. The strongest effects were caused by natural zeolite, which significantly reduced the average content of chromium. Contamination at 320 mg Ni.kg-1 of soil led to the highest increases in the Ni, Pb and Cr contents of soil.

Development of a method for determination of metallic iron content within hot briquette iron (HBI for steelmaking

Directory of Open Access Journals (Sweden)

Morcali M.H.

2016-01-01

Full Text Available The growing use of metallic iron in metallurgy and industrial chemical applications requires a fast, easy and cheap method for the determination of metallic iron, not merely in recyclable materials, such as iron pellets, reduced iron mill scale dust, electric arc furnace dust and pig iron, but from hot briquette iron (HBI as well. This study investigates a new method for determination of metallic iron within HBI used for steel-making materials. The effects of reaction time, temperature, and stirring rate were studied. The concentration of iron was determined via Atomic Absorption Spectroscopy (AAS. After the optimization study, high-purity metallic iron powder (Sigma-Aldrich, PubChem Substance ID 24855469 was used to compare efficiencies and identify the optimum conditions; The present study was matched with international standard methods (BS ISO 5416:2006, IS 15774:2007. Results were consistent with certified values and metallic iron content could be determined within the 95% confidence level. The purposed method is easy, straightforward, and cheap.

Total Contents and Sequential Extraction of Heavy Metals in Soils Irrigated with Wastewater, Akaki, Ethiopia

Science.gov (United States)

Fitamo, Daniel; Itana, Fisseha; Olsson, Mats

2007-02-01

The Akaki River, laden with untreated wastes from domestic, industrial, and commercial sources, serves as a source of water for irrigating vegetable farms. The purpose of this study is to identify the impact of waste-water irrigation on the level of heavy metals and to predict their potential mobility and bioavailability. Zn and V had the highest, whereas Hg the lowest, concentrations observed in the soils. The average contents of As, Co, Cr, Cu, Ni, Zn, V, and Hg of both soils; and Pb and Se from Fluvisol surpassed the mean + 2 SD of the corresponding levels reported for their uncontaminated counterparts. Apparently, irrigation with waste water for the last few decades has contributed to the observed higher concentrations of the above elements in the study soils (Vertisol and Fluvisol) when compared to uncontaminated Vertisol and Fluvisol. On the other hand, Vertisol accommodated comparatively higher average levels of Cr, Cu, Ni, Zn, etc V, and Cd, whereas high contents of Pb and Se were observed in Fluvisol. Alternatively, comparable levels of Co and Hg were found in either soil. Except for Ni, Cr, and Cd in contaminated Vertisol, heavy metals in the soils were not significantly affected by the depth (0-20 and 30-50 cm). When the same element from the two soils was compared, the levels of Cr, Cu, Ni, Pb, Se, Zn, V, Cd at 0-20 cm; and Cr, Ni, Cu, Cd, and Zn at 30-50 cm were significantly different. Organic carbon (in both soils), CEC (Fluvisol), and clay (Vertisol) exhibited significant positive correspondences with the total heavy metal levels. Conversely, Se and Hg contents revealed perceptible associations with carbonate and pH. The exchangeable fraction was dominated by Hg and Cd, whereas the carbonate fraction was abounded with Cd, Pb, and Co. conversely, V and Pb displayed strong affinity to reducible fraction, where as Cr, Cu, Zn, and Ni dominated the oxidizable fraction. Cr, Hg, Se, and Zn (in both soils) showed preference to the residual fraction

Method of quantitative analysis of superconducting metal-conducting composite materials

International Nuclear Information System (INIS)

Bogomolov, V.N.; Zhuravlev, V.V.; Petranovskij, V.P.; Pimenov, V.A.

1990-01-01

Technique for quantitative analysis of superconducting metal-containing composite materials, SnO 2 -InSn, WO 3 -InW, Zn)-InZn in particular, has been developed. The method of determining metal content in a composite is based on the dependence of superconducting transition temperature on alloy composition. Sensitivity of temperature determination - 0.02K, error of analysis for InSn system - 0.5%

INFLUENCE OF ILLEGAL WASTE DUMPING SITES OF NORTH-WEST PART OF BARLINEK COMMUNITY ON HEAVY METALS CONTENT IN SOILS

Directory of Open Access Journals (Sweden)

Kamil Szydłowski

2017-02-01

Full Text Available The in-depth analysis of the soil samples study included 6 from 17 catalogued illegal waste dumps localized in the Barlinek Commune (Gmina Barlinek area. The samples were taken from the middle part of each waste dump and at 5 meter distance toward north and south directions. In the collected material the pH values and concentration of lead, zinc, cadmium, cobalt, manganese, nickel, chromium, iron, copper and mercury were determined. The results of laboratory analysis were compared with current standards (Regulation of the Minister of Environment from 9th September 2002 on soil quality standards and quality standards of soil - Journal of Laws 2002 No 165, item 1359 and with the soils classification by the content of trace elements, according to Kabata-Pendias et al. The reason of diversified content of heavy metals in the collected soils samples from different waste dumps is various morphological composition of deposited waste. Nonetheless, waste landfilled on illegal dumps were not significantly influencing the levels of soil contamination with heavy metals. The concentration of Hg, Cd, Co, Cr, Cu, Mn, Ni, Pb, Zn, Fe qualifies those soils to geochemical natural levels of heavy metals content. Nevertheless, cadmium was the element, which concentration were most often (21 times exceeded.

Effects of a metallic front gate on the temperature-dependent electronic property of pentacene films

Energy Technology Data Exchange (ETDEWEB)

Lin, Yow-Jon, E-mail: rzr2390@yahoo.com.tw [Institute of Photonics, National Changhua University of Education, Changhua 500, Taiwan (China); Tsao, Hou-Yen [Institute of Photonics, National Changhua University of Education, Changhua 500, Taiwan (China); Liu, Day-Shan [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, Huwei 632, Taiwan (China)

2014-11-14

The effect of a metallic front gate on the temperature-dependent electronic property of pentacene films was investigated in this study. The carrier mobility exhibits strong temperature dependence, implying the dominance of tunneling (hopping) at low (high) temperatures. The room-temperature mobility was drastically increased by capping an In (Au) layer on the pentacene front surface. However, the carrier concentration is not affected. An increase in the phonon energy occurs for In-capped or Au-capped pentacene samples, which corresponds to the abrupt transition to the nonlocal electron–phonon coupling. The enhanced mobility by capping a metal layer is attributed to a change in the electron–phonon coupling. - Highlights: • For the metal-capped and uncapped pentacene films, the mobility was researched. • The mobility was dramatically increased by capping an In (Au) layer. • The induced strain by capping a metal layer is found. • The strain may lead to the electron–phonon coupling variation. • The enhanced mobility is attributed to the weakened electron–phonon coupling.

Chemical speciation of heavy metals in sandy soils in relation to availability and mobility

NARCIS (Netherlands)

Temminghoff, E.J.M.

1998-01-01

Toughness of submerged arc weld metals of controlled rolled NB bearing steel

International Nuclear Information System (INIS)

Yamaguchi, T.; Shiga, A.; Kamada, A.; Tsuboi, J.

1982-01-01

The toughness and the hardness of reheated weld metals depend on the maximum reheating temperature. When the maximum reheating temperature is 500 to 700 0 C, the hardness of single pass weld metal increases and the toughness decreases because of fine Nb- and V-carbonitride precipitation. When the maximum reheating temperature is over 800 0 C, the hardness and the toughness remain almost unchanged. The stress relieving treatment of single pass weld metal at 600 0 C for 1 up to about 100 hours causes the increase in hardness and then decreases the hardness gradually. It needs over 500 hours to obtain the same hardness value as that of as-welded metal. The addition of Ti to weld metal is very effective to improve the toughness, however excess Ti increases the hardness of stress relieved weld metal by precipitating as fine Ti-carbonitride. Therefore Ti addition should be restricted within the lowest limit required to improve as-welded metal toughness. The optimum Ti content is about 0.020% in the case of weld metal of which oxygen content is 350 ppM or so. In multipass welding, the hardness of weld metal affected by subsequent weld heat cycle varies from pass to pass, because Nb and V content change with the passes as the result of the change in dilution from base metal. The most hardened zone is observed in the reheated first pass weld metal, in which Nb and V content are the highest. Good weld metal toughness would be obtained by lowering dilution from base metal and taking advantage of grain refinement by subsequent passes

Recent temporal variations of trace metal content in an Italian white wine.

Science.gov (United States)

Illuminati, Silvia; Annibaldi, Anna; Truzzi, Cristina; Scarponi, Giuseppe

2014-09-15

For the first time in Italy, the temporal variations of Cd, Pb and Cu content in an Italian white wine were studied over the period 1995-2010. A previously set up and optimized Square-Wave Anodic Stripping Voltammetric technique was used. Cd showed a first decrease (∼30%) due to the use of pesticides with progressively low Cd residues. Since 2000 Cd had constant and extremely low values (0.17±0.07 μg L(-1)). A significant decrease (∼74%) from 1995 to 2010 was observed for Pb (mean concentration, 18±10 μg L(-1)) probably due to the recent decrease in Pb emissions in the atmosphere following the phasing out of metal from gasoline (in Italy since 2002). The Cu reduction (mean value, 32±15 μg L(-1)) of ∼74% from 1995 to 2010 was related to the use of phytoiatric products with a progressively low Cu content. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effect of alkali metal content of carbon on retention of iodine at high temperatures

International Nuclear Information System (INIS)

Evans, A.G.

1975-01-01

Activated carbon for filters in reactor confinement systems is intentionally impregnated with iodine salts to enhance the removal of radioiodine from air streams containing organic iodides. When a variety of commercial impregnated carbons were evaluated for iodine retention at elevated temperatures (4 hours at 180 0 C), wide variations in iodine penetration were observed. The alkali metal and iodine content of carbon samples was determined by neutron activation analysis, and a strong correlation was shown between the atom ratio of iodine to alkali metals in the carbons and the high-temperature retention performance. Carbons containing excess alkali (especially potassium) have iodine penetration values 10 to 100 times lower than carbons containing excess iodine. Both low I/K ratios and high pH values were shown essential to high efficiency iodine retention; therefore, conversion of elemental iodine to ionic iodine is the basic reaction mechanism. The natural high K + content and high pH coconut carbons make coconut the preferred natural base material for nuclear air cleaning applications. Studies show, however, that treatment of low potassium carbons with a mixture of KOH and I 2 may produce a product equal to or better than I 2 -impregnated coconut carbons at a lower cost. (U.S.)

Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays

International Nuclear Information System (INIS)

Lim, Seong-Rin; Schoenung, Julie M.

2010-01-01

Display devices such as cathode-ray tube (CRT) televisions and computer monitors are known to contain toxic substances and have consequently been banned from disposal in landfills in the State of California and elsewhere. New types of flat panel display (FPD) devices, millions of which are now purchased each year, also contain toxic substances, but have not previously been systematically studied and compared to assess the potential impact that could result from their ultimate disposal. In the current work, the focus is on the evaluation of end-of-life toxicity potential from the heavy metal content in select FPD devices with the intent to inform material selection and design-for-environment (DfE) decisions. Specifically, the metals antimony, arsenic, barium, beryllium, cadmium, chromium, cobalt, copper, lead, mercury, molybdenum, nickel, selenium, silver, vanadium, and zinc in plasma TVs, LCD (liquid crystal display) TVs, LCD computer monitors and laptop computers are considered. The human health and ecotoxicity potentials are evaluated through a life cycle assessment perspective by combining data on the respective heavy metal contents, the characterization factors in the U.S. EPA Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI), and a pathway and impact model. Principal contributors to the toxicity potentials are lead, arsenic, copper, and mercury. Although the heavy metal content in newer flat panel display devices creates less human health toxicity potential than that in CRTs, for ecological toxicity, the new devices are worse, especially because of the mercury in LCD TVs and the copper in plasma TVs.

Heavy metal content and molecular species identification in canned tuna: Insights into human food safety.

Science.gov (United States)

Pappalardo, Anna Maria; Copat, Chiara; Ferrito, Venera; Grasso, Alfina; Ferrante, Margherita

2017-05-01

Canned tuna in olive oil and in brine of the most popular brands sold in Italian markets were analyzed to verify the authentication of transformed products, with the aim to unveil commercial frauds due to the substitutions of high value species with species of low commercial value, and to assess the health risk of consumers related to cadmium (Cd), lead (Pb) and mercury (Hg) contents. Species authentication was evaluated with amplification of COI DNA barcode and confirmed the declared species. Among tested metals, Hg had the highest concentrations, followed by Cd and Pb. None of the tested samples surpassed the European regulatory limits no. 1881/2006 fixed for Hg and Pb, whereas one batch of canned tuna in olive oil exceeded standard for Cd. Risk for human health was evaluated by the metals daily intake and target hazard quotient (THQ). As a result, Cd and Pb did not exceed the toxicological reference values established by World Health Organization (WHO) and the Environmental Protection Agency (EPA). Conversely, Hg content suggests a consumption no more than once a week and a continuous surveillance of this fishery products for consumer protection.

Designing novel bulk metallic glass composites with a high aluminum content.

Science.gov (United States)

Chen, Z P; Gao, J E; Wu, Y; Wang, H; Liu, X J; Lu, Z P

2013-11-27

The long-standing challenge for forming Al-based BMGs and their matrix composites with a critical size larger than 1 mm have not been answered over the past three decades. In this paper, we reported formation of a series of BMG matrix composites which contain a high Al content up to 55 at.%. These composites can be cast at extraordinarily low cooling rates, compatible with maximum rod diameters of over a centimetre in copper mold casting. Our results indicate that proper additions of transition element Fe which have a positive heat of mixing with the main constituents La and Ce can appreciably improve the formability of the BMG matrix composites by suppressing the precipitation of Al(La,Ce) phase resulted from occurrence of the phase separation. However, the optimum content of Fe addition is strongly dependant on the total amount of the Al content in the Al-(CoCu)-(La,Ce) alloys.

Study of the temperature dependence of giant magnetoresistance in metallic granular composite

International Nuclear Information System (INIS)

Ju Sheng; Li, Z.-Y.

2002-01-01

The temperature dependence of the giant magnetoresistance of metallic granular composite is studied. It is considered that the composite contains both large magnetic grains with surface spin S' and small magnetic impurities. It is found that the decrease of surface spin S' of grain is the main cause of an almost linear decrease of giant magnetoresistance with the increase of temperature in high temperature range. The magnetic impurities, composed of several atoms, lead to an almost linear increase of the giant magnetoresistance with the decrease of temperature in low temperature range. Our calculations are in good agreement with recent experimental data for metallic nanogranular composites

Linear dose dependence of ion beam mixing of metals on Si

International Nuclear Information System (INIS)

Poker, D.B.; Appleton, B.R.

1985-01-01

These experiments were conducted to determine the dose dependences of ion beam mixing of various metal-silicon couples. V/Si and Cr/Si were included because these couples were previously suspected of exhibiting a linear dose dependence. Pd/Si was chosen because it had been reported as exhibiting only the square root dependence. Samples were cut from wafers of (100) n-type Si. The samples were cleaned in organic solvents, etched in hydrofluoric acid, and rinsed with methanol before mounting in an oil-free vacuum system for thin-film deposition. Films of Au, V, Cr, or Pd were evaporated onto the Si samples with a nominal deposition rate of 10 A/s. The thicknesses were large compared with those usually used to measure ion beam mixing and were used to ensure that conditions of unlimited supply were met. Samples were mixed with Si ions ranging in energy from 300 to 375 keV, chosen to produce ion ranges that significantly exceeded the metal film depth. Si was used as the mixing ion to prevent impurity doping of the Si substrate and to exclude a background signal from the Rutherford backscattering (RBS) spectra. Samples were mixed at room temperature, with the exception of the Au/Si samples, which were mixed at liquid nitrogen temperature. The samples were alternately mixed and analyzed in situ without exposure to atmosphere between mixing doses. The compositional distributions after mixing were measured using RBS of 2.5-MeV 4 He atoms

Orientational analysis of dodecanethiol and p-nitrothiophenol SAMs on metals with polarisation-dependent SFG spectroscopy.

Science.gov (United States)

Cecchet, Francesca; Lis, Dan; Guthmuller, Julien; Champagne, Benoît; Caudano, Yves; Silien, Christophe; Mani, Alaa Addin; Thiry, Paul A; Peremans, André

2010-02-22

Polarisation-dependent sum frequency generation (SFG) spectroscopy is used to investigate the orientation of molecules on metallic surfaces. In particular, self-assembled monolayers (SAMs) of dodecanethiol (DDT) and of p-nitrothiophenol (p-NTP), grown on Pt and on Au, have been chosen as models to highlight the ability of combining ppp and ssp polarisations sets (representing the polarisation of the involved beams in the conventional order of SFG, Vis and IR beam) to infer orientational information at metallic interfaces. Indeed, using only the ppp set of data, as it is usually done for metallic surfaces, is not sufficient to determine the full molecular orientation. We show here that simply combining ppp and ssp polarisations enables both the tilt and rotation angles of methyl groups in DDT SAMs to be determined. Moreover, for p-NTP, while the SFG active vibrations detected with the ppp polarisation alone provide no orientational information, however, the combination with ssp spectra enables to retrieve the tilt angle of the p-NTP 1,4 axis. Though orientational information obtained by polarisation-dependent measurements has been extensively used at insulating interfaces, we report here their first application to metallic surfaces.

Orientational Analysis of Dodecanethiol and P-Nitrothiophenol SAMs on Metals with Polarisation - dependent SFG spectroscopy

International Nuclear Information System (INIS)

Manea, A.

2011-01-01

Polarisation-dependent sum frequency generation (SFG) spectroscopy is used to investigate the orientation of molecules on metallic surfaces. In particular, self-assembled monolayers (SAMs) of dodecanethiol (DDT) and of p-nitro thiophenol (p-NTP), grown on Pt and on Au, have been chosen as models to highlight the ability of combining ppp and ssp polarizations sets (representing the polarisation of the involved beams in the conventional order of SFG, Vis and IR beam) to infer orientational information at metallic interfaces. Indeed, using only the ppp set of data, as it is usually done for metallic surfaces, is not sufficient to determine the full molecular orientation. We show here that simply combining ppp and ssp polarizations enables both the tilt and rotation angles of methyl groups in DDT SAMs to be determined. Moreover, for p-NTP, while the SFG active vibrations detected with the ppp polarisation alone provide no orientational information, however, the combination with ssp spectra enables to retrieve the tilt angle of the p-NTP 1,4 axis. Though orientational information obtained by polarisation-dependent measurements has been extensively used at insulating interfaces, we report here their first application to metallic surfaces. (author)

Enhancing the use of waste activated sludge as bio-fuel through selectively reducing its heavy metal content.

Science.gov (United States)

Dewil, Raf; Baeyens, Jan; Appels, Lise

2007-06-18

Power plant or cement kiln co-incineration are important disposal routes for the large amounts of waste activated sludge (WAS) which are generated annually. The presence of significant amounts of heavy metals in the sludge however poses serious problems since they are partly emitted with the flue gases (and collected in the flue gas dedusting) and partly incorporated in the ashes of the incinerator: in both cases, the disposal or reuse of the fly ash and bottom ashes can be jeopardized since subsequent leaching in landfill disposal can occur, or their "pozzolanic" incorporation in cement cannot be applied. The present paper studies some physicochemical methods for reducing the heavy metal content of WAS. The used techniques include acid and alkaline thermal hydrolysis and Fenton's peroxidation. By degrading the extracellular polymeric substances, binding sites for a large amount of heavy metals, the latter are released into the sludge water. The behaviour of several heavy metals (Cd, Cr, Cu, Hg, Pb, Ni, Zn) was assessed in laboratory tests. Results of these show a significant reduction of most heavy metals.

Effect of heavy metals on soil enzyme activity at different field conditions in Middle Spis mining area (Slovakia).

Science.gov (United States)

Angelovičová, Lenka; Lodenius, Martin; Tulisalo, Esa; Fazekašová, Danica

2014-12-01

Heavy metals concentrations were measured in the former mining area located in Hornad river valley (Slovakia). Soil samples were taken in 2012 from 20 sites at two field types (grasslands, heaps of waste material) and two different areas. Total content of heavy metals (Cu, Pb, Zn, Hg), urease (URE), acid phosphatase (ACP), alkaline phosphatase (ALP), soil reaction (pH) were changing depending on the field/area type. The tailing pond and processing plants have been found as the biggest sources of pollution. URE, ACP and ALP activities significantly decreased while the heavy metal contents increased. Significant differences were found among area types in the heavy metal contents and activity of URE. No statistical differences in the content of heavy metals but significant statistical differences for soil pH were found for field types (grassland and heaps). Significant negative correlation was found for URE-Pb, URE-Zn and also between soil reaction and ACP and ALP.

Electric Field-Dependent Photoluminescence in Multilayer Transition Metal Dichalcogenides

Science.gov (United States)

Stanev, T. K.; Henning, A.; Sangwan, V. K.; Speiser, N.; Stern, N. P.; Lauhon, L. J.; Hersam, M. C.; Wang, K.; Valencia, D.; Charles, J.; Kubis, T. C.

Owing to interlayer coupling, transition metal dichalcogenides (TMDCs) such as MoS2 exhibit strong layer dependence of optical and electronic phenomena such as the band gap and trion and neutral exciton population dynamics. Here, we systematically measure the effect of layer number on the optical response of multilayer MoS2 in an external electric field, observing field and layer number dependent emission energy and photoluminescence intensity. These effects are studied in few (2-6) and bulk (11 +) layered structures at low temperatures. In MoS2\\ the observed layer dependence arises from several mechanisms, including interlayer charge transfer, band structure, Stark Effect, Fermi level changes, screening, and surface effects, so it can be challenging to isolate how these mechanisms impact the observables. Because it behaves like a stack of weakly interacting monolayers rather than multilayer or bulk, ReS2 provides a comparison to traditional TMDCs to help isolate the underlying physical mechanisms dictating the response of multilayers. This work is supported by the National Science Foundation MRSEC program (DMR-1121262), and the 2-DARE Grant (EFRI-1433510). N.P.S. is an Alfred P. Sloan Research Fellow.

Non-uniform Solute Segregation at Semi-Coherent Metal/Oxide Interfaces

Science.gov (United States)

Choudhury, Samrat; Aguiar, Jeffery A.; Fluss, Michael J.; Hsiung, Luke L.; Misra, Amit; Uberuaga, Blas P.

2015-08-01

The properties and performance of metal/oxide nanocomposites are governed by the structure and chemistry of the metal/oxide interfaces. Here we report an integrated theoretical and experimental study examining the role of interfacial structure, particularly misfit dislocations, on solute segregation at a metal/oxide interface. We find that the local oxygen environment, which varies significantly between the misfit dislocations and the coherent terraces, dictates the segregation tendency of solutes to the interface. Depending on the nature of the solute and local oxygen content, segregation to misfit dislocations can change from attraction to repulsion, revealing the complex interplay between chemistry and structure at metal/oxide interfaces. These findings indicate that the solute chemistry at misfit dislocations is controlled by the dislocation density and oxygen content. Fundamental thermodynamic concepts - the Hume-Rothery rules and the Ellingham diagram - qualitatively predict the segregation behavior of solutes to such interfaces, providing design rules for novel interfacial chemistries.

Release of gases from uranium metal at high temperatures

International Nuclear Information System (INIS)

Sayi, Y.S.; Ramanjaneyulu, P.S.; Yadav, C.S.; Shankaran, P.S.; Chhapru, G.C.; Ramakumar, K.L.; Venugopal, V.

2008-01-01

Depending on the ambient environmental conditions, different gaseous species could get entrapped in uranium metal ingots or pellets. On heating, melting or vapourising uranium metal, these get released and depending on the composition, may cause detrimental effects either within the metal matrix itself or on the surrounding materials/environment. For instance, these gases may affect the performance of the uranium metal, which is used as fuel in the heavy water moderated research reactors, CIRUS and DHRUVA. Hence, detailed investigations have been carried out on the release of gases over a temperature range 875-1500 K employing hot vacuum extraction technique, in specimen uranium pellets made from uranium rods/ingots. Employing an on-line quadrupole mass spectrometer, the analysis of released gases was carried out. The isobaric interference between carbon monoxide and nitrogen at m/e = 28 in the mass spectrometric analysis has been resolved by considering their fragmentation patterns. Since no standards are available to evaluate the results, only the reproducibility is tested. The precision (relative standard deviation at 3σ level) of the method is ±5%. The minimum detectable gas content employing the method is 5.00 x 10 -09 m 3 . About 4 x 10 -04 m 3 /kg of gas is released from uranium pellets, with hydrogen as the main constituent. The gas content increases with storage in air

Heavy metal contents and transfer capacities of Phragmites australis and Suaeda salsa in the Yellow River Delta, China

Science.gov (United States)

Zhang, Shuai; Bai, Junhong; Wang, Wei; Huang, Laibing; Zhang, Guangliang; Wang, Dawei

2018-04-01

Plant samples including roots, stems and leaves of Phragmites australis and Suaeda salsa were collected in the short-term flooding and tidal flooding wetlands of the Yellow River Delta of China. Six heavy metals (e.g., As, Cd, Cr, Cu, Pb, and Zn) were measured in roots, stems and leaves of each plant species using inductively coupled plasma atomic absorption spectrometry (ICP-AAS) to investigate the levels, and transfer capabilities of heavy metals in these two plant species. Our results showed that in the tidal flooding wetlands, the contents of As, Cr and Cd in roots of Phragmites australis and Suaeda salsa were higher than those in their stems and leaves. Suaeda salsa showed higher contents of Pb and Zn in leaves than those in roots and stems, whereas lower levels of Pb and Zn were observed in Phragmites australis. In the short-term flooding wetlands, heavy metal contents exhibited a big difference between different tissues of Phragmites australis and Suaeda salsa, and both plant species showed higher levels of Pb and Zn in leaves. Suaeda salsa roots enriched more As and Cd, whereas higher enrichment levels were observed in Phragmites australis leaves, which indicated different transfer capacities of these two wetland plants. The transfer factors for stems and leaves of Phragmites australis in the tidal flooding wetlands significantly differed from those in the short-term flooding wetlands, however, no significant differences in transfer factors for stems and leaves of Suaeda salsa were observed between these two types of wetlands.

Heavy and toxic metals in staple foodstuffs and agriproduct from contaminated soils

International Nuclear Information System (INIS)

Gorbunov, A.V.; Kistanov, A.A.; Lyapunov, S.M.; Okina, O.I.; Frontas'eva, M.V.; Ramadan, A.B.

2002-01-01

This article presents basic data on the content of Cr, Fe, Ni, Cu, Zn, As, Cd, Sb, Hg, and Pb in staple foodstuffs and agriproducts grown in Russia (Astrakhan region and the town of Belovo) and Egypt (Helwan region). The dependence of the concentration of metals in agriproducts on the content and chemical form of existence in irrigation water and soils is indicated

Heavy and Toxic Metals in Staple Foodstuffs and Agriproduct from Contaminated Soils

CERN Document Server

Gorbunov, A V; Kistanov, A A; Lyapunov, S M; Okina, O I; Ramadan, A B

2002-01-01

This article presents basic data on the content of Cr, Fe, Ni, Cu, Zn, As, Cd, Sb, Hg, and Pb in staple foodstuffs and agriproduct grown in Russia (Astrakhan region and the town of Belovo) and Egypt (Helwan region). The dependence of the concentration of metals in agriproducts on the content and chemical form of existence in irrigation water and soils is indicated.

Heavy metals contamination characteristics in soil of different mining activity zones

Institute of Scientific and Technical Information of China (English)

LIAO Guo-li; LIAO Da-xue; LI Quan-ming

2008-01-01

Depending upon the polluted features of various mining activities in a typical nonferrous metal mine, the contaminated soil area was divided into four zones which were polluted by tailings, mine drainage, dust deposition in wind and spreading minerals during vehicle transportation, respectively. In each zone, soil samples were collected. Total 28 soil samples were dug and analyzed by ICP-AES and other relevant methods. The results indicate that the average contents of Zn, Pb, Cd, Cu and As in soils are 508.6, 384.8, 7.53, 356 and 44.6 mg/kg, respectively. But the contents of heavy metals in different zone have distinct differences. The proportion of oxidizing association with organic substance is small. Difference of the association of heavy metals is small in different polluted zones.

Spatial variability and temporal changes in the trace metal content of soils: implications for mine restoration plan.

Science.gov (United States)

Chandra, Rachna; Prusty, B Anjan Kumar; Azeez, P A

2014-06-01

Trace metals in soils may be inherited from the parent materials or added to the system due to anthropogenic activities. In proposed mining areas, trace metals become an integral part of the soil system. Usually, researchers undertake experiments on plant species selection (for the restoration plan) only after the termination of mining activities, i.e. without any pre-mining information about the soil-plant interactions. Though not shown in studies, it is clear that several recovery plans remain unsuccessful while carrying out restoration experiments. Therefore, we hypothesize that to restore the area effectively, it is imperative to consider the pre-mining scenario of metal levels in parent material as well as the vegetation ecology of the region. With these specifics, we examined the concentrations of trace metals in parent soils at three proposed bauxite locations in the Eastern Ghats, India, and compared them at a spatio-temporal scale. Vegetation quantification and other basic soil parameters accounted for establishing the connection between soil and plants. The study recorded significant spatial heterogeneity in trace metal concentrations and the role of vegetation on metal availability. Oxidation reduction potential (ORP), pH and cation exchange capacity (CEC) directly influenced metal content, and Cu and Ni were lithogenic in origin. It implies that for effective restoration plant species varies for each geological location.

Metal-phthalocyanine ordered layers on Au(110): Metal-dependent adsorption energy

Energy Technology Data Exchange (ETDEWEB)

Massimi, Lorenzo, E-mail: lorenzo.massimi@uniroma1.it; Angelucci, Marco; Gargiani, Pierluigi; Betti, Maria Grazia [Dipartimento di Fisica, Università di Roma La “Sapienza,” 00185 Roma (Italy); Montoro, Silvia [IFIS Litoral, CONICET-UNL, Laboratorio de Fisica de Superficies e Interfaces, Güemes 3450, Santa Fe (Argentina); Mariani, Carlo, E-mail: carlo.mariani@uniroma1.it [Dipartimento di Fisica, CNISM, Università di Roma La “Sapienza,” 00185 Roma (Italy)

2014-06-28

Iron-phthalocyanine and cobalt-phthalocyanine chains, assembled along the Au(110)-(1×2) reconstructed channels, present a strong interaction with the Au metallic states, via the central metal ion. X-ray photoemission spectroscopy from the metal-2p core-levels and valence band high-resolution ultraviolet photoelectron spectroscopy bring to light signatures of the interaction of the metal-phthalocyanine single-layer with gold. The charge transfer from Au to the molecule causes the emerging of a metal-2p core level component at lower binding energy with respect to that measured in the molecular thin films, while the core-levels associated to the organic macrocycle (C and N 1s) are less influenced by the adsorption, and the macrocycles stabilize the interaction, inducing a strong interface dipole. Temperature Programmed Desorption experiments and photoemission as a function of temperature allow to estimate the adsorption energy for the thin-films, mainly due to the molecule-molecule van der Waals interaction, while the FePc and CoPc single-layers remain adsorbed on the Au surface up to at least 820 K.

Metal and metallothionein content in tissues from wild and farmed Anguilla anguilla at commercial size.

Science.gov (United States)

Ureña, R; Peri, S; del Ramo, J; Torreblanca, A

2007-05-01

Metallothionein and metal content (Cd, Zn, Hg, Cu, Fe, Pb and Mn) were determined in various organs of commercially available eel (Anguilla anguilla) of similar size obtained from a local farm and from The Albufera Lake in Valencia (Spain). Farmed fish showed statistically significant higher Cd concentrations in liver and kidney whereas wild individuals had higher levels of Pb in blood and Zn in kidney. Significant positive correlations were found between metallothionein and Cd in kidney of farmed eel and between metallothionein and Cu in liver of wild ones. No statistically significant differences were found between the two populations in the concentration of any of the metals analyzed in muscle and in all instances these levels were lower than the limits established by the Spanish legislation for fish destined for human consumption.

Time-dependent liquid metal flows with free convection and free surfaces

International Nuclear Information System (INIS)

McClelland, M.A.

1990-11-01

A finite element analysis is given for time-dependent liquid metal flows with free convection and free surfaces. Consideration is given to a two-dimensional shallow trough with vertical walls maintained at different temperatures. The spatial formulation incorporates mixed Lagrangian approximations to the velocity, pressure, temperature, and interface position. The time integration method is performed using the Trapezoid Rule with step-size control. The Galerkin method is employed to reduce the problem to a set of nonlinear algebraic equations which are solved with the Newton-Raphson method. Calculations are performed for conditions relevant to the electron beam vaporization of refractory metals. The Prandtl number is 0.015, and Grashof numbers are in the transition region between laminar and turbulent flow. The results reveal the effects of flow intensity, surface-tension gradients, and mesh and time-step refinement

Predicting the phytoextraction duration to remediate heavy metal contaminated soils

NARCIS (Netherlands)

Koopmans, G.F.; Römkens, P.F.A.M.; Song, J.; Temminghoff, E.J.M.; Japenga, J.

2007-01-01

The applicability of phytoextraction to remediate soils contaminated with heavy metals (HMs) depends on, amongst others, the duration before remediation is completed. The impact of changes in the HM content in soil occurring during remediation on plant uptake has to be considered in order to obtain

Influence of osmotic and metal stresses on nitrogenase activity of ...

African Journals Online (AJOL)

SERVER

2007-08-06

Aug 6, 2007 ... metal requirements often absent in other bacteria; copper ... Table 1. The effect of salt concentrations on nitrogenase activity in nitrogen-fixing Anabaena, Nostoc and Nodularia spp. ... as a detoxification mechanism. ..... the critical iron toxicity contents of paddy are above 500 .... Isolation of nickel dependent.

Heavy metals effects on forage crops yields and estimation of elements accumulation in plants as affected by soil

International Nuclear Information System (INIS)

Grytsyuk, N.; Arapis, G.; Perepelyatnikova, L.; Ivanova, T.; Vynograds'ka, V.

2006-01-01

Heavy metals (Cu, Cd, Pb, Zn) effect on the productivity of forage crops (clover and perennial cereal grasses) and their accumulation in plants, depending on the concentration of these elements in a soil, has been studied in micro-field experiments on three types of soil. The principle objective was to determine regularities of heavy metals migration in a soil-plant system aiming the estimation of permissible levels of heavy metals content in soils with the following elaboration of methods, which regulate the toxicants transfer to plants. Methods of field experiments, agrochemical and atomic absorption analysis were used. Results were statistically treated by Statistica 6.0, S-Plus 6. Experimental results have shown that the intensity of heavy metals accumulation in plants depends on the type of the soil, the species of plants, the physicochemical properties of heavy metals and their content in the soil. Logarithmic interdependency of heavy metals concentration in soils and their accumulation in plants is suggested. However, the strong correlation between the different heavy metals concentrations in the various soils and the yield of crops was not observed. Toxicants accumulation in crops decreased in time

Heavy metals effects on forage crops yields and estimation of elements accumulation in plants as affected by soil.

Science.gov (United States)

Grytsyuk, N; Arapis, G; Perepelyatnikova, L; Ivanova, T; Vynograds'ka, V

2006-02-01

Heavy metals (Cu, Cd, Pb, Zn) effect on the productivity of forage crops (clover and perennial cereal grasses) and their accumulation in plants, depending on the concentration of these elements in a soil, has been studied in micro-field experiments on three types of soil. The principle objective was to determine regularities of heavy metals migration in a soil-plant system aiming the estimation of permissible levels of heavy metals content in soils with the following elaboration of methods, which regulate the toxicants transfer to plants. Methods of field experiments, agrochemical and atomic absorption analysis were used. Results were statistically treated by Statistica 6.0, S-Plus 6. Experimental results have shown that the intensity of heavy metals accumulation in plants depends on the type of the soil, the species of plants, the physicochemical properties of heavy metals and their content in the soil. Logarithmic interdependency of heavy metals concentration in soils and their accumulation in plants is suggested. However, the strong correlation between the different heavy metals concentrations in the various soils and the yield of crops was not observed. Toxicants accumulation in crops decreased in time.

Non-Destructive X-ray Spectrometric and Chromatographic Analysis of Metal Containers and Their Contents, from Ancient Macedonia

Directory of Open Access Journals (Sweden)

Christos S. Katsifas

2018-06-01

Full Text Available This work describes a holistic archaeometric approach to ancient Macedonian specimens. In the region of the ancient city Lete, the deceased members of a rich and important family were interred in a cluster of seven tombs (4th century BC. Among the numerous grave goods, there was also a set of metal containers preserving their original content. The physico-chemical analysis of the containers and their contents was performed in order to understand the purpose of their use. For the containers, Energy Dispersive micro-X-Ray Fluorescence (EDμXRF spectroscopy was implemented taking advantage of its non-invasive character. The case (B35 and the small pyxis (B37 were made of a binary Cu-Sn alloy accompanied by a slight amount of impurities (Fe, Pb, As and the two miniature bowls were made of almost pure Cu. For the study of the contents, a combination of EDμXRF, X-Ray Diffraction (XRD, and Gas Chromatography—Mass Spectrometry (GC-MS was carried out. Especially for the extraction of the volatile compounds, the Solid Phase Micro-Extraction (SPME technique was used in the headspace mode. Because of the detection of Br, High Pressure Liquid Chromatography coupled to a Diode-Array-Detector (HPLC-DAD was implemented, confirming the existence of the ancient dye shellfish purple (porphyra in Greek. The analytical results of the combined implementation of spectrometric and chromatographic analytical techniques of the metal containers and their contents expand our knowledge about the pharmaceutical practices in Macedonia during the 4th century BC.

Development and testing of metallic fuels with high minor actinide content

International Nuclear Information System (INIS)

Meyer, M.K.; Hayes, S.L.; Kennedy, J.R.; Keiser, D.D.; Hilton, B.A.; Frank, S.M.; Kim, Y.-S.; Chang, G.; Ambrosek, R.G.

2003-01-01

Metallic alloys are promising candidates for use as fuels for transmutation and in advanced closed nuclear cycles. Metallic alloys have high heavy metal atom density, relatively high thermal conductivity, favorable gas release behavior, and lend themselves to remote recycle processes. Both non-fertile and uranium-bearing metal fuels containing minor actinide are under consideration for use as transmutation fuels by the U.S. Advanced Fuel Cycle (AFC) program, however, little irradiation performance data exists for fuel forms containing significant fractions of minor actinides. The first irradiation tests of non-fertile high-actinide-content fuels are scheduled to begin in early 2003 in the Advanced Test Reactor (ATR). The irradiation test matrix was designed to provide basic information on the irradiation behavior of binary Pu-Zr alloy fuel and the effect of the minor actinides americium and neptunium on alloy fuel behavior, together and separately. Five variants of transuranic containing zirconium-based alloy fuels are included in the AFC-1 irradiation test matrix. These are (in wt.%) Pu-40Zr, Pu-60Zr, Pu-12Am-40Zr, Pu-10Np-40Zr and Pu-10Np-10Am-40Zr. PuN-ZrN based fuels containing Am and Np are also included. All five of the fuel alloys have been fabricated in the form of cylindrical fuel slugs by arc-casting. Short melt times, on the order or 5-20 seconds, prevent the volatilization of significant quantities of americium metal, despite the high melt temperatures characteristic of the arc-melting process. Alloy microstructure have been characterized by x-ray diffraction and scanning electron microscopy. Thermal analysis has also been performed. The AFC-1 irradiation experiment configuration consists of twenty-four sodium bonded fuel specimens sealed in helium filled secondary capsules. The first capsule has a design burnup to 7 at.% 239 Pu; goal peak burnup of the second capsule is ∼18 at%. Capsule assemblies are placed within an aluminum flow-through basket

The occurrence of calcium in pharyngeal tonsils of children dependent on gender, living place and influence of passive smoking

Directory of Open Access Journals (Sweden)

Ewa Nogaj

2011-03-01

Full Text Available The characteristic of occurrence calcium content in pharyngeal tonsils from 60 girls and 90 boys living in 9 region of Upper Silesia is presented in this article. Analysis of content of Ca in pharyngheal tonsils was observed in four groups of children: girls and boys exposed to tobacco smoke and unexposed to tabacco smoke, influence parameters environments on contents Ca in tissue tonsil and the cross-correlation analysis between content of ion Ca and other metals Al, Cd, Cu, Ni, Pb, Zn, Mg, Ba, showed repeating co-dependences between Ca in girls from Cd, Al., Zn, Ni, Pb. In case of boys colective dependence was been dependence Ca in Mg, Cd, Zn. Arithmetic mean of calcium in pharyngeal tonsils from exposed girls was 1345.00 µg/g, in comparison to unexposed girls 1292.88 µg/g, in exposed to tobacco smoke boys- 1832.63 µg/g and unexposed boys 565.05 µg/g. It turned out that gender perform important part in absorbed calcium and here noticeable was been big ability to concentrate toxic metals in girls

A unified dislocation density-dependent physical-based constitutive model for cold metal forming

Science.gov (United States)

Schacht, K.; Motaman, A. H.; Prahl, U.; Bleck, W.

2017-10-01

Dislocation-density-dependent physical-based constitutive models of metal plasticity while are computationally efficient and history-dependent, can accurately account for varying process parameters such as strain, strain rate and temperature; different loading modes such as continuous deformation, creep and relaxation; microscopic metallurgical processes; and varying chemical composition within an alloy family. Since these models are founded on essential phenomena dominating the deformation, they have a larger range of usability and validity. Also, they are suitable for manufacturing chain simulations since they can efficiently compute the cumulative effect of the various manufacturing processes by following the material state through the entire manufacturing chain and also interpass periods and give a realistic prediction of the material behavior and final product properties. In the physical-based constitutive model of cold metal plasticity introduced in this study, physical processes influencing cold and warm plastic deformation in polycrystalline metals are described using physical/metallurgical internal variables such as dislocation density and effective grain size. The evolution of these internal variables are calculated using adequate equations that describe the physical processes dominating the material behavior during cold plastic deformation. For validation, the model is numerically implemented in general implicit isotropic elasto-viscoplasticity algorithm as a user-defined material subroutine (UMAT) in ABAQUS/Standard and used for finite element simulation of upsetting tests and a complete cold forging cycle of case hardenable MnCr steel family.

Effect Of Heavy Metals Stress On Enzyme Activities And Chlorophyll Content Of Pea (Pisum Sativum) And Tomato Plants

International Nuclear Information System (INIS)

Ahmed, B.M.; El Maghrabi, G.; Hashem, M.F.

2013-01-01

The effects of heavy metal stress on the chlorophyll in addition to catalase and peroxidase activities were studied in the leaves and roots of tomato and pea plants. Four groups were studied; the control group and other three groups treated with heavy metals. Group 1HM was treated with 1.0 mg CuSO 4 /l + 0.2 mg CdSO 4 /l + 0.1 mg ZnNO 3 /l every 10 days while in group 5 HM and group 10 HM, the doses were 5 and 10 folds the 1 HM, respectively. Leaves and roots of control and heavy metal-stressed plants were harvested after 10 weeks for chlorophyll determination. The chlorophyll content, especially chlo. b, was significantly decreased with the increase in heavy metals stress in both plants. In leaves of heavy metal-stressed plants, the peroxidase level in different stress levels was increased with increasing stress levels in tomato and pea while catalase was unchanged in leaves of tomato in comparison with the control. The activities of catalase and peroxidase in roots of heavy metal-stressed plants were increased in group 5 HM then decreased in case of group 10 HM. The increase in enzyme activities demonstrated that tomato is more tolerant to heavy metals than pea

Time-dependent density functional calculation of the energy loss of antiprotons colliding with metallic nanoshells

International Nuclear Information System (INIS)

Quijada, M.; Borisov, A.G.; Muino, R.D.

2008-01-01

Time-dependent density functional theory is used to study the interaction between antiprotons and metallic nanoshells. The ground state electronic properties of the nanoshell are obtained in the jellium approximation. The energy lost by the antiproton during the collision is calculated and compared to that suffered by antiprotons traveling in metal clusters. The resulting energy loss per unit path length of material in thin nanoshells is larger than the corresponding quantity for clusters. It is shown that the collision process can be interpreted as the antiproton crossing of two nearly bi-dimensional independent metallic systems. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Distribution of Heavy Metal Content Hg and Cr of Environmental Samples at Surabaya Area

International Nuclear Information System (INIS)

Agus Taftazani

2007-01-01

Determination of Hg and Cr content of Surabaya river and coastal environmental samples using Instrumental Neutron Activation Analysis (INAA) have been done. The environmental samples were water, sediment, Eichhornia crassipes (Mart) Solmms, Rhizophora stylosa, Johnius (Johnieops) borneensis fish, and Moolgarda delicate fish at 12 locations selected of Surabaya area. Dry powder of sediment and biotic samples and concentrate water samples was irradiated by neutron flux 1.05 x 10 11 n.cm -2 .det -1 during 12 hours. The analytical result showed that the concentration of the heavy metals of river water are smaller than Perda Surabaya City No. 02/2004 for the 4 th level water which are Hg (0.005 ppm) and Cr (1.000 ppm). All locations coastal water samples have Hg and Cr concentrations are higher than Kepmen LH No.51/2004 Hg (0.001 ppm) and Cr (0.005 ppm). The Hg concentration of fish samples have exceeded the threshold according to Kep. Dirjen POM No.03725/B/SK/VII/89 about the maximum concentration of metal pollution in food. The concentration of heavy metals in sediment, Eichhornia crassipes (Mart) Solmms and Rhizophora stylosa are not regulated, so then heavy metals pollution can not be referred to. The concentration of Hg and Cr elements of water samples are smaller than that of biotic and sediment samples. The distribution factor (F d ) is bigger than bioaccumulation factor (F b ). (author)

MOSSES AND LICHENS – BIOINDICATORS OF HEAVY METALS POLLUTION OF FOREST ECOSYSTEMS

Directory of Open Access Journals (Sweden)

BEGU A.

2014-03-01

Full Text Available This study is a comparative investigation of the content of heavy metals (Pb, Cu, Ni, Zn and Cr in mosses and lichens recorded in ten deciduous forests in the Republic of Moldova included in a transnational grid (16x16 km of forest monitoring throughout Europe. The content of heavy metals doesn’t differ significant by depending on the location of studied forest ecosystems. The trends of larger accumulation are observed near the local stationary and mobile sources of pollution. Mosses were confirmed as good indicators of air pollution with heavy metals to forest ecosystems located near sources of pollution and lichens show good bio-indicators particularities for background pollution. The good correlation between the concentrations of moss and lichen were Cr, Cu and Ni, and the low correlation between Pb and Zn, which are considered to be metals which are amenable to long-distance dispersal.

Metal pollution in a contaminated bay: Relationship between metal geochemical fractionation in sediments and accumulation in a polychaete

International Nuclear Information System (INIS)

Fan, Wenhong; Xu, Zhizhen; Wang, Wen-Xiong

2014-01-01

Jinzhou Bay in Northern China has been seriously contaminated with metals due to the impacts of smelting activities. In this study, we investigated the relationship between metal accumulation in a deposit-feeding polychaete Neanthes japonica and metal concentration and geochemical fractionation (Cd, Cu, Pb, Zn and Ni) in sediments of Jinzhou Bay. Compared with the historical data, metals in the more mobile geochemical fraction (exchangeable and carbonate fractions) were gradually partitioned into the more stable fraction (Fe–Mn oxides) over time. Metal concentration and geochemical fractionation in sediment significantly affected metal bioavailability and accumulation in polychaetes, except for Ni. Metal accumulation in polychaetes was significantly influenced by Fe or Mn content, and to a lesser degree by organic matter. Prediction of metal bioaccumulation in polychaetes was greatly improved by normalizing metal concentrations to Mn content in sediment. The geochemical fractionation of metals in sediments including the exchangeable, organic matter and Fe–Mn oxides were important in controlling the sediment metal bioavailability to polychaetes. - Highlights: • Metals in contaminated sediments gradually partitioned into the more stable phase over time. • Metal accumulation in polychaetes was more significantly influenced by Fe/Mn content than by organic matter. • Prediction of metal bioaccumulation greatly improved by normalizing metals to Mn content in sediment. • Metals in exchangeable, organic matter and Fe–Mn oxides were important in controlling their bioavailability. - Prediction of metal bioaccumulation in polychaetes was significantly improved by normalizing metal concentrations to Mn content in sediment

Recovering heavy rare earth metals from magnet scrap

Science.gov (United States)

Ott, Ryan T.; McCallum, Ralph W.; Jones, Lawrence L.

2017-08-08

A method of treating rare earth metal-bearing permanent magnet scrap, waste or other material in a manner to recover the heavy rare earth metal content separately from the light rare earth metal content. The heavy rare earth metal content can be recovered either as a heavy rare earth metal-enriched iron based alloy or as a heavy rare earth metal based alloy.

Crystallization, optimization and preliminary X-ray characterization of a metal-dependent PI-PLC from Streptomyces antibioticus

International Nuclear Information System (INIS)

Jackson, Michael R.; Selby, Thomas L.

2012-01-01

Crystallization and diffraction analysis of a Ca 2+ -dependent PI-PLC from Streptomyces is reported. Optimization of crystals was completed using a drop-pinning technique and heavy-atom soaks to achieve high-quality diffraction to 1.23 Å. A recombinant metal-dependent phosphatidylinositol-specific phospholipase C (PI-PLC) from Streptomyces antibioticus has been crystallized by the hanging-drop method with and without heavy metals. The native crystals belonged to the orthorhombic space group P222, with unit-cell parameters a = 41.26, b = 51.86, c = 154.78 Å. The X-ray diffraction results showed significant differences in the crystal quality of samples soaked with heavy atoms. Additionally, drop pinning, which increases the surface area of the drops, was also used to improve crystal growth and quality. The combination of heavy-metal soaks and drop pinning was found to be critical for producing high-quality crystals that diffracted to 1.23 Å resolution

Subcellular partitioning of metals in Aporrectodea caliginosa along a gradient of metal exposure in 31 field-contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Beaumelle, Léa [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France); Gimbert, Frédéric [Laboratoire Chrono-Environnement, UMR 6249 University of Franche-Comté/CNRS Usc INRA, 16 route de Gray, 25030 Besançon Cedex (France); Hedde, Mickaël [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France); Guérin, Annie [INRA, US 0010 LAS Laboratoire d' analyses des sols, 273 rue de Cambrai, 62000 Arras (France); Lamy, Isabelle, E-mail: lamy@versailles.inra.fr [INRA, UR 251 PESSAC, 78026 Versailles Cedex (France)

2015-07-01

Subcellular fractionation of metals in organisms was proposed as a better way to characterize metal bioaccumulation. Here we report the impact of a laboratory exposure to a wide range of field-metal contaminated soils on the subcellular partitioning of metals in the earthworm Aporrectodea caliginosa. Soils moderately contaminated were chosen to create a gradient of soil metal availability; covering ranges of both soil metal contents and of several soil parameters. Following exposure, Cd, Pb and Zn concentrations were determined both in total earthworm body and in three subcellular compartments: cytosolic, granular and debris fractions. Three distinct proxies of soil metal availability were investigated: CaCl{sub 2}-extractable content dissolved content predicted by a semi-mechanistic model and free ion concentration predicted by a geochemical speciation model. Subcellular partitionings of Cd and Pb were modified along the gradient of metal exposure, while stable Zn partitioning reflected regulation processes. Cd subcellular distribution responded more strongly to increasing soil Cd concentration than the total internal content, when Pb subcellular distribution and total internal content were similarly affected. Free ion concentrations were better descriptors of Cd and Pb subcellular distribution than CaCl{sub 2} extractable and dissolved metal concentrations. However, free ion concentrations and soil total metal contents were equivalent descriptors of the subcellular partitioning of Cd and Pb because they were highly correlated. Considering lowly contaminated soils, our results raise the question of the added value of three proxies of metal availability compared to soil total metal content in the assessment of metal bioavailability to earthworm. - Highlights: • Earthworms were exposed to a wide panel of historically contaminated soils • Subcellular partitioning of Cd, Pb and Zn was investigated in earthworms • Three proxies of soil metal availability were

Phytotoxicity of thallium (Tl) in culture solution. Pt. 1. Effects of Tl(I) on the growth and heavy metal contents of pea and field bean plants

Energy Technology Data Exchange (ETDEWEB)

Poetsch, U; Austenfeld, F A

1985-01-01

The effects of TlNO/sub 3/ and Tl(I)EDTA on growth and heavy metal contents of pea plants and field bean plants were compared in hydroponic culture experiments. In the presence of TlNO/sub 3/, the essential heavy metals were available to the plants in their ionic forms. When Tl(I)EDTA was present the essential heavy metals were available as chelated complexes. With increasing concentration of TlNO/sub 3/ dry matter production of pea plants was lowered and the Tl content of each organ was increased. The highest Tl content was found within the stems. The increased Tl contents were accompanied by depressed Mn, Zn, and Cu contents of the roots and depressed Mn contents of the stems, but increased Fe contents of the stems. Substitution of TlNO/sub 3/ by Tl(I)EDTA resulted in a stronger growth inhibition of the pea plants, and higher Tl contents of each organ. The highest Tl content was found within the stems. Tl(I)EDTA depressed Mn in the roots, but increased Fe and Mn in the stems, and Fe, Zn and Cu in the leaves. The increases may due to concentration by growth inhibition. The growth of the field bean was not effected by TlNO/sub 3/ nor by Tl(I)EDTA. The field bean contained most of the Tl within the roots and translocated only relatively small amounts to the shoots. This pattern was independent of the Tl compound. Increasing concentrations of TlNO/sub 3/ resulted in depressed Mn and Zn contents of the roots, and Mn contents of the stems. Chelation of Tl(I) resulted in a decrease of the Tl content of each organ. Tl(I)EDTA depressed only the Mn content of the roots.

Potentially toxic metals in ombrotrophic peat along a 400 km English-Scottish transect

Energy Technology Data Exchange (ETDEWEB)

Smith, E.J. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Hughes, S. [Centre for Ecology and Hydrology (Bangor), Deiniol Road, Bangor, Gwynedd LL57 2UP (United Kingdom); Lawlor, A.J. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Lofts, S. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Simon, B.M. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Stevens, P.A. [Centre for Ecology and Hydrology (Bangor), Deiniol Road, Bangor, Gwynedd LL57 2UP (United Kingdom); Stidson, R.T. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom); Tipping, E. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom)]. E-mail: et@ceh.ac.uk; Vincent, C.D. [Centre for Ecology and Hydrology (Lancaster), Lancaster Environment Centre, Bailrigg, Lancaster LA1 4AP (United Kingdom)

2005-07-15

Four samples of ombrotrophic peat were collected from each of 10 upland locations in a transect from the southern Pennines to the Highland Boundary Fault, a total distance of ca. 400 km. Bulk compositions and other properties were determined. Total contents of Al and heavy metals (Ni, Cu, Zn, Cd, Pb) were determined following digestion with hydrofluoric acid, and concentrations of metals extractable with dilute nitric acid were also measured. Supernatants obtained from aqueous extractions of the peat samples were analysed for pH, major cations and anions, dissolved organic carbon and dissolved metals, and concentrations of free metal ions (Al{sup 3+}, Ni{sup 2+}, etc.) were estimated by applying a chemical speciation model. Both total and HNO{sub 3}-extractable metal concentrations varied along the transect, the highest values being found at locations close to industrial and former mining areas. The HNO{sub 3}-extractable soil metal contents of Ni, Cu and Cd were appreciably lower than lowest-observed-effect-concentrations (LOEC) for toxicity towards microorganisms in acid, organic rich soils. However, the contents of Zn at two locations, and of Pb at five locations exceeded LOECs, suggesting that they may be exerting toxic effects in the peats. Soil solution concentrations of free heavy metal ions (Cu{sup 2+}, Zn{sup 2+}, Cd{sup 2+}, Pb{sup 2+}) were substantially lower than LOECs for toxicity towards vascular plants, whereas concentrations of Al{sup 3+} were near to toxic levels at two locations. - P eat metal contents depend upon proximity to industrial and mining areas; the metals may be exerting toxic effects in some places.

Size-dependent single electron transfer and semi-metal-to-insulator transitions in molecular metal oxide electronics

Science.gov (United States)

Balliou, Angelika; Bouroushian, Mirtat; Douvas, Antonios M.; Skoulatakis, George; Kennou, Stella; Glezos, Nikos

2018-07-01

All-inorganic self-arranged molecular transition metal oxide hyperstructures based on polyoxometalate molecules (POMs) are fabricated and tested as electronically tunable components in emerging electronic devices. POM hyperstructures reveal great potential as charging nodes of tunable charging level for molecular memories and as enhancers of interfacial electron/hole injection for photovoltaic stacks. STM, UPS, UV–vis spectroscopy and AFM measurements show that this functionality stems from the films’ ability to structurally tune their HOMO–LUMO levels and electron localization length at room temperature. By adapting POM nanocluster size in solution, self-doping and current modulation of four orders of magnitude is monitored on a single nanocluster on SiO2 at voltages as low as 3 Volt. Structurally driven insulator-to-semi-metal transitions and size-dependent current regulation through single electron tunneling are demonstrated and examined with respect to the stereochemical and electronic structure of the molecular entities. This extends the value of self-assembly as a tool for correlation length and electronic properties tuning and demonstrate POM hyperstructures’ plausibility for on-chip molecular electronics operative at room temperature.

Size-dependent single electron transfer and semi-metal-to-insulator transitions in molecular metal oxide electronics.

Science.gov (United States)

Balliou, Angelika; Bouroushian, Mirtat; Douvas, Antonios M; Skoulatakis, George; Kennou, Stella; Glezos, Nikos

2018-07-06

All-inorganic self-arranged molecular transition metal oxide hyperstructures based on polyoxometalate molecules (POMs) are fabricated and tested as electronically tunable components in emerging electronic devices. POM hyperstructures reveal great potential as charging nodes of tunable charging level for molecular memories and as enhancers of interfacial electron/hole injection for photovoltaic stacks. STM, UPS, UV-vis spectroscopy and AFM measurements show that this functionality stems from the films' ability to structurally tune their HOMO-LUMO levels and electron localization length at room temperature. By adapting POM nanocluster size in solution, self-doping and current modulation of four orders of magnitude is monitored on a single nanocluster on SiO 2 at voltages as low as 3 Volt. Structurally driven insulator-to-semi-metal transitions and size-dependent current regulation through single electron tunneling are demonstrated and examined with respect to the stereochemical and electronic structure of the molecular entities. This extends the value of self-assembly as a tool for correlation length and electronic properties tuning and demonstrate POM hyperstructures' plausibility for on-chip molecular electronics operative at room temperature.

Estimation of Moisture Content & Metal Ions in White Flowers of Bougainvillea spectabilis and Purple Flowers of Bougainvillea glabra in Pakistan

OpenAIRE

*S. A. Rashid; F. S. Rehmani; 1M. Arman; M. Ibrahim; 2S. Shafique

2011-01-01

Bougainvillea consists of 18 shrubby species, growing in different parts of Pakistan and is being used as Anti-ulcer, Anti-diarrheal, Anti-microbial, Anti- diabetic, Amylase Inhibition and as for low blood pressure but none of the studies on Bougainvillea focused on the estimation of metal ion concentration. The focus of the present study was to estimation of moisture content and comparative analysis of trace metal ions in white flowers of Bougainvillea spectabilis Willd and Purple flowers of...

Experimental determination of the temperature dependence of metallic work functions at low temperatures. Progress report

International Nuclear Information System (INIS)

Pipes, P.B.

1977-01-01

Progress made under ERDA Contract No. EY-76-S-02-2314.002 is described. Efforts to gain theoretical insight into the temperature dependence of the contact potential of Nb near the superconducting transition have only been qualitatively successful. Preliminary measurements of adsorbed 4 He gas on the temperature dependence of the contact potentials of metals were performed and compared with a previously developed theory

Studies of Radioactive Contaminations and heavy metal contents in vegetables and fruit from Lublin, Poland

International Nuclear Information System (INIS)

Chibowski, S.

2000-01-01

This paper presents studies of the level of some gamma radioactive elements and heavy metals in fruits, vegetables and plants from Lublin. Potassium 40 K isotope was most prevalent element in the examined samples. It concentrated mainly in aboveground parts of some vegetables, for example in parsley and carrots haulm and in leaves of red beet and leek (from 1135 to 1940 Bq/kg). considerably lower concentrations of this element were noticed in the roots of the vegetables, running from 210 to 448 Bq/kg of dry matter. In examined fruit, the 40 K contents ranged from 490 to 510 Bq/kg. Transfer factors of 40 K, from the soil to the vegetables and fruit, ranged from 0.3 to 2.9. The natural isotopes of uranium series account for 17% of total activity, whereas thorium series was 19-20% of its activity. In fact, in examined fruit (raspberry, red and black currants) and roots of vegetables caesium 137 Cs was not detected, whereas some amounts of it were noticed in green parts of vegetables, from 4.0 to 8.4 Bq/kg of dry matter. The transfer factor of 137 Cs from the soil to examined samples ranged from 0.03 to 0.4. in all studied samples examined on heavy metal contents no valid safety standards for these elements were exceeded. (author)

Disorder dependent half-metallicity in Mn2CoSi inverse Heusler alloy

International Nuclear Information System (INIS)

Singh, Mukhtiyar; Saini, Hardev S.; Thakur, Jyoti; Reshak, Ali H.; Kashyap, Manish K.

2013-01-01

Heusler alloys based thin-films often exhibit a degree of atomic disorder which leads to the lowering of spin polarization in spintronic devices. We present ab-initio calculations of atomic disorder effects on spin polarization and half-metallicity of Mn 2 CoSi inverse Heusler alloy. The five types of disorder in Mn 2 CoSi have been proposed and investigated in detail. The A2 a -type and B2-type disorders destroy the half-metallicity whereas it sustains for all disorders concentrations in DO 3a - and A2 b -type disorder and for smallest disorder concentration studied in DO 3b -type disorder. Lower formation energy/atom for A2 b -type disorder than other four disorders in Mn 2 CoSi advocates the stability of this disorder. The total magnetic moment shows a strong dependence on the disorder and the change in chemical environment. The 100% spin polarization even in the presence of disorders explicitly supports that these disorders shall not hinder the use of Mn 2 CoSi inverse Heusler alloy in device applications. - Graphical abstract: Minority-spin gap (E g↓ ) and HM gap (E sf ) as a function of concentrations of various possible disorder in Mn 2 CoSi inverse Heusler alloy. The squares with solid line (black color)/dotted line (blue color)/dashed line (red color) reperesents E g↓ for DO 3a -/DO 3b -/A2 b -type disorder in Mn 2 CoSi and the spheres with solid line (black color)/dottedline (blue color)/dashed line (red color) represents E sf for DO 3a -/DO 3b -/A2 b -type disorder in Mn 2 CoSi. - Highlights: • The DO 3 - and A2-type disorders do not affect the half-metallicity in Mn 2 CoSi. • The B2-type disorder solely destroys half-metallicity in Mn 2 CoSi. • The A2-type disorder most probable to occur out of all three types. • The total spin magnetic moment strongly depends on the disorder concentrations

Heavy metal contamination, microbiological spoilage and biogenic amine content in sushi available on the Polish market.

Science.gov (United States)

Kulawik, Piotr; Dordevic, Dani; Gambuś, Florian; Szczurowska, Katarzyna; Zając, Marzena

2018-05-01

The present study determined the heavy metal contamination (mercury, cadmium, lead, arsenic and nickel) of nori, restaurant-served sushi and ready-to-eat sushi meals available via retail chains. Moreover, both microbiological load and biogenic amine content in ready-to-eat sushi meals were analysed. All of the nori samples contained high levels of Cd (2.122 mg kg -1 ), Ni (0.715 mg kg -1 ), As (34.56 mg kg -1 ) and Pb (0.659 mg kg -1 ). The studied sushi samples contained high levels of Ni and Pb, reaching 0.194 and 0.142 mg kg -1 wet weight, respectively, being potentially hazardous to women during pregnancy and lactation and small children. None of the studied samples contained high levels of Hg. Overall, 37% of ready-to-eat sushi meals exceeded a microbiological load of 10 6  cfu g -1 . However, biogenic amine content in all of the samples was low, with a highest histamine content of 2.05 mg kg -1 . Sushi is not the source of high levels of biogenic amines even with high microbiological loads. Nevertheless, the high microbiological loads at the end of the shelf-life indicate that some processors might have problems with the distribution chain or implement a poor hygienic regime. Moreover as a result of possible risk associated with heavy metal contamination, the present study highlights the need to establish new regulations regarding the contamination of nori and sushi. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Influence of metals on essential oil content and composition of lemongrass (Cymbopogon citratus (D.C.) Stapf.) grown under different levels of red mud in sewage sludge amended soil.

Science.gov (United States)

Gautam, Meenu; Agrawal, Madhoolika

2017-05-01

Lemongrass is a commercially important perennial herb with medicinal value and ability to tolerate high alkaline and saline conditions. Essential oil bearing plants can grow safely in soil contaminated with heavy metals without severe effects on morphology and oil yield. The present study was aimed to assess the essential oil content and composition in lemongrass in response to elevated metals in above-ground plant parts. Pot experiment was conducted for six months using sewage sludge as soil amendment (soil: sludge: 2:1 w/w) followed by red mud treatments (0, 5, 10 and 15% w/w). Garden soil without sludge and red mud was control and there were ten replicates of each treatment. Oil content in leaves was differently affected due to presence of metals in soil under different treatments. Oil content under S RM5 (5% red mud) treatment was raised by 42.9 and 11.5% compared to the control and S RM0 treatment, respectively. Among identified compounds in oil under red mud treatments, 17 compounds contributed more than 90% of total volatiles (citral contributing approximately 70%). Under S RM10 treatment, essential oil showed maximum citral content (75.3%). Contents of Fe, Zn, Cu, Cd, Ni and Pb in above-ground plant parts exceeded, whereas Mn was detected within WHO permissible limits for medicinal plants. However, metal contents in essential oil were well within FSSAI limits for food. The study suggests utilization of 5 and 10% red mud in sludge amended soil for lemongrass cultivation to have better oil yield and quality, without metal contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors affecting heavy metal uptake in plant selection for phytoremediation

Energy Technology Data Exchange (ETDEWEB)

Anton, A.; Mathe-Gaspar, G. [Research Inst. for Soil Science and Agricultural Chemistry of the Hungarian Academy of Sciences, Budapest (Hungary)

2005-04-01

The heavy metal uptake of ten plant species was studied under different soil and climatic conditions. Effects of soil pH, temperature, plant species and phenophase on the heavy metal content of stems and leaves were determined in pot experiments. Plants and soil samples were collected from a lead/zinc mine ore (Gyoengyoesoroszi, Hungary) and characterised by high contents of Pb, Zn, As, Cd, Cu. The possibility of an adapted phytoremediation technology was indicated by different bioconcentration factors (BCF). The BCF depended markedly (10- to 100-fold) on plant species and environmental conditions. Based on our results a ''season-adapted'' phytoextraction technology with different plant species (utilising their different temperature requirements and/or harvest time) is suggested. (orig.)

Measurements of time-dependent liquid-metal magnetohydrodynamic flows in a flat rectangular duct

International Nuclear Information System (INIS)

Buehler, L.; Horanyi, S.

2009-01-01

In the helium-cooled lead lithium (HCLL) blanket, which has been chosen as a reference concept for a liquid-metal breeding blanket to be tested in ITER, the heat is removed by helium cooled plates aligned with the strong toroidal magnetic field that confines the fusion plasma. The liquid breeder lead lithium circulates through gaps of rectangular cross-section between the cooling plates to transport the generated tritium towards external extraction facilities. Under the action of the strong magnetic field, liquid metal flows in conducting rectangular ducts exhibit jet-like velocity profiles in the thin boundary layers near the side walls, which are parallel to the magnetic field like the cooling plates in HCLL blankets. The velocity in these side layers may exceed several times the mean velocity in the duct and it is known that these layers become unstable for sufficiently high Reynolds numbers. The present paper summarizes experimental results for such unstable time-dependent flows in strong magnetic fields, which have been obtained in the MEKKA liquid metal laboratory of the Forschungszentrum Karlsruhe. In particular, spatial and temporal scales of perturbation patterns are identified. The results suggest that the flow between cooling plates in a HCLL blanket is laminar and stable. The observed time-dependent flow behavior appears at larger velocities so that the present results are more relevant for applications in dual coolant concepts where high-velocity jets have been predicted along side walls.

Microstructural Characterization and Mechanical Properties Analysis of Weld Metals with Two Ni Contents During Post-Weld Heat Treatments

Science.gov (United States)

Wu, Da-yong; Han, Xiu-lin; Tian, Hong-tao; Liao, Bo; Xiao, Fu-ren

2015-05-01

This study designed post-weld heat treatments, including reheating and tempering, associated with hot bending to investigate the microstructures, toughness, and hardness of two weld metals with different Ni contents (transformation temperature and increased the proportion of acicular ferrite (AF). Furthermore, a high Ni content promoted the martensite/austenite (M/A) constituent formation after reheating. The promotion of the M/A formation increased the number of cementite particles, and accelerated cementite coarsening during tempering. The large-angle grain boundary density from the AF improved the toughness despite the negative effect of cementite. The strengthening contributions were calculated, and the grain refinement was the greatest. The high Ni content decreased the effective grain size with a 2 deg tolerance angle, thus enhancing the grain refinement contribution.

Effects of gamma-ray-induced free radicals on the metal content and amino acid composition of human metallothionein-1

International Nuclear Information System (INIS)

Goossens, Lieven

2011-01-01

Metallothioneins (MTs), a low-mass class of metalloproteins, are characterized by a high thiolate sulphur and metal content. MTs are involved in metal homeostasis and heavy metal detoxification, and are efficient scavengers of free radicals. This article describes zinc release from human MT-1 and modification of its amino acid composition when subjected to free radicals generated during gamma ray radiolysis. The effect of gamma ray radiolysis of untreated and metal-depleted human MT-1 was tested under multiple aerobic and anaerobic conditions at increasing irradiation doses. Under all conditions, a rapid increase of serine in the early stages of irradiation was observed. Irradiation for longer times led to cysteic acid formation, except under argon atmosphere. Several other amino acid concentrations gradually decreased. Formation of limited amounts of hydroxyproline, hydroxylysine and ornithine as well as some less common derivatives such as cystathionine occurred as side-effects. (author)

Metal Matrix Composite Material by Direct Metal Deposition

Science.gov (United States)

Novichenko, D.; Marants, A.; Thivillon, L.; Bertrand, P. H.; Smurov, I.

Direct Metal Deposition (DMD) is a laser cladding process for producing a protective coating on the surface of a metallic part or manufacturing layer-by-layer parts in a single-step process. The objective of this work is to demonstrate the possibility to create carbide-reinforced metal matrix composite objects. Powders of steel 16NCD13 with different volume contents of titanium carbide are tested. On the base of statistical analysis, a laser cladding processing map is constructed. Relationships between the different content of titanium carbide in a powder mixture and the material microstructure are found. Mechanism of formation of various precipitated titanium carbides is investigated.

The effect of moisture content on the corrosion of fasteners embedded in wood subjected to alkaline copper quaternary treatment

International Nuclear Information System (INIS)

Zelinka, Samuel L.; Glass, Samuel V.; Derome, Dominique

2014-01-01

Highlights: • We examine the dependence of metal corrosion on wood moisture content. • Corrosion of steel and galvanized steel in treated wood were measured. • Corrosion products were analyzed across moisture contents using X-ray diffraction. • The corrosion rate has a sigmoidal dependence on moisture content. • The data herein can be used to improve combined hygrothermal–corrosion models. - Abstract: This paper characterizes the corrosion rate of embedded fasteners as a function of wood moisture content using gravimetric and electrochemical measurements. The results indicated that the corrosion rate increased with moisture content before reaching a plateau. The phases present in the corrosion products, as analyzed using X-ray diffraction, are generally consistent with previous work. Uniform corrosion was observed for all fasteners and all conditions except steel fasteners embedded in water-saturated wood. Data of dependence of corrosion rate on moisture content, presented herein, are necessary to ensure the accuracy of combined hygrothermal/corrosion models used to predict durability of wood structures

Predicting trace metal solubility and fractionation in Urban soils from isotopic exchangeability

International Nuclear Information System (INIS)

Mao, L.C.; Young, S.D.; Tye, A.M.; Bailey, E.H.

2017-01-01

Metal-salt amended soils (MA, n = 23), and historically-contaminated urban soils from two English cities (Urban, n = 50), were investigated to assess the effects of soil properties and contaminant source on metal lability and solubility. A stable isotope dilution method, with and without a resin purification step, was used to measure the lability of Cd, Cu, Ni, Pb and Zn. For all five metals in MA soils, lability (%E-values) could be reasonably well predicted from soil pH value with a simple logistic equation. However, there was evidence of continuing time-dependent fixation of Cd and Zn in the MA soils, following more than a decade of storage under air-dried conditions, mainly in high pH soils. All five metals in MA soils remained much more labile than in Urban soils, strongly indicating an effect of contaminant source on metal lability in the latter. Metal solubility was predicted for both sets of soil by the geochemical speciation model WHAM-VII, using E-value as an input variable. For soils with low metal solution concentrations, over-estimation of Cd, Ni and Zn solubility was associated with binding to the Fe oxide fraction while accurate prediction of Cu solubility was dependent on humic acid content. Lead solubility was most poorly described, especially in the Urban soils. Generally, slightly poorer estimation of metal solubility was observed in Urban soils, possibly due to a greater incidence of high pH values. The use of isotopically exchangeable metal to predict solubility is appropriate both for historically contaminated soils and where amendment with soluble forms of metal is used, as in toxicological trials. However, the major limitation to predicting solubility may lie with the accuracy of model input variables such as humic acid and Fe oxide contents where there is often a reliance on relatively crude analytical estimations of these variables. Trace metal reactivity in urban soils depends on both soil properties and the original source material

Contenido de metales en Cancer polyodon (Crustacea: Decapoda en un sistema de bahías del norte de Chile (27°S Metal contents in Cancer polyodon (Crustacea: Decapoda in a bay system of northern Chile (27°S

Directory of Open Access Journals (Sweden)

Alexis Castillo

2011-11-01

Full Text Available El contenido de Zn, Cu, Cd, Pb, Fe, Al y Ni fue analizado en tejido muscular de Cancer polyodon en las bahías de Caldera, Calderilla, Inglesa y Salada (Atacama, Chile. Los resultados fueron comparados con estudios similares desarrollados por otros autores y la normativa de carácter nacional e internacional relacionada con el contenido de metales pesados en crustáceos para consumo humano. El orden de abundancia de los metales analizados en C. polyodon fue CdThe contents of Zn, Cu, Cd, Pb, Fe, Al and Ni in the muscle tissue of Cancer polyodon from Caldera, Calderilla, Inglesa, and Salada bays (Atacama, Chile were quantified. The results were compared with similar studies by other authors and with the national and international regulatory standards for heavy metal contents in crustaceans for human consumption. In increasing order, the metal contents in C. polyodon were: Cd< Ni< Cu< Pb< Znmetals except Cu differed significantly (P < 0.05 among the analyzed bays. Of the seven metals analyzed, Pb, Fe, and Al concentrations in C. polyodon were higher than those reported for other coastal systems. Concentrations of Cu (except Calderilla, Cd (except Caldera and Inglesa, and Pb exceeded the threshold values indicated by the national and international standards, suggesting that the presence of these metals in C. polyodon represents a potential risk for human health.

ULTRA-FAINT DWARF GALAXIES AS A TEST OF EARLY ENRICHMENT AND METALLICITY-DEPENDENT STAR FORMATION

International Nuclear Information System (INIS)

Tassis, Konstantinos; Gnedin, Nickolay Y.; Kravtsov, Andrey V.

2012-01-01

The close relation of star formation with molecular gas indicated by observations and assumed in recent models implies that the efficiency with which galaxies convert their gas into stars depends on gas metallicity. This is because abundance of molecular hydrogen is sensitive to abundance of dust, which catalyzes formation of H 2 and helps to shield it from dissociating radiation. In this study, we point out that in the absence of significant pre-enrichment by Population III stars forming out of zero metallicity gas, such H 2 -based star formation is expected to leave an imprint in the form of bi-modality in the metallicity distribution among dwarf galaxies and in the metallicity distribution of stars within individual galaxies. The bi-modality arises because when gas metallicity (and dust abundance) is low, formation of molecular gas is inefficient, the gas consumption timescale is long, and star formation and metal enrichment proceed slowly. When metallicity reaches a critical threshold value star formation and enrichment accelerate, which leads to rapid increase in both stellar mass and metallicity of galaxies. We demonstrate this process both using a simple analytical model and full cosmological simulations. In contrast, the observed metallicity distributions of dwarf galaxies or stars within them are not bi-modal. We argue that this discrepancy points to substantial early stochastic pre-enrichment by Population III stars to levels Z ∼ 10 –2 Z ☉ in dense, star-forming regions of early galaxies.

Accumulation of heavy metals in Medicago sativa L. and Trifolium pratense L. at the contaminated fluvisol

Directory of Open Access Journals (Sweden)

Jakšić Snežana P.

2013-01-01

Full Text Available Recently, heavy metals concentrations increased in some agricultural areas due to the consequences of anthropogenic impacts. The aim of this study was to determine the level of heavy metals (As, Cr, Ni and Pb in Medicago sativa L. and Trifolium pratense L. grown on fluvisol, in order to obtain information on safety of these nutrients. The total content of Pb, As, Cr and Ni in the samples of fluvisol was above the maximum allowable amount. The content of heavy metals in Medicago sativa L. and Trifolium pratense L. was below the critical and toxic concentrations in all samples originating from contaminated soil. It was concluded that the accumulation of heavy metals in plants did not depend only on the total content in soil, but also the affinity of the plant, and individual and interactive effects of various soil properties. No statistically significant differences in the accumulation of heavy metals between Medicago sativa L. and Trifolium pratense L were observed. It is necessary to further control of heavy metals in the investigated area, in order to prevent their entry into the food chain and provide healthy food.

Multiplicity dependence of matrix-induced frequency shifts for atomic transitions of the group 12 metals in rare gas solids

International Nuclear Information System (INIS)

Laursen, S.L.; Cartland, H.E.

1991-01-01

Atomic resonances of the group 12 metal atoms, Hg, Cd, and Zn, undergo frequency shifts from the gas phase atomic line when trapped in rare gas matrices of Ar, Kr, and Xe at 12 K. As expected, the shifts are approximately linear in polarizability of the rare gas, but the slope of this line depends on whether the transition in question is 1 P 1 left-arrow 1 S 0 or 3 P 1 left-arrow 1 S 0 . Thus the matrix-induced frequency shift is dependent on the singlet or triplet nature of the excited state as well as on the matrix material. This dependence on multiplicity is discussed in terms of interactions between the excited-state atomic orbitals and the matrix. The results are compared to matrix studies of other metals and to related gas-phase work on diatomic van der Waals complexes of group 12 metals with rare gases

Magntic susceptibility as a proxy to heavy metal content in the sediments of Anzali wetland, Iran

Directory of Open Access Journals (Sweden)

Naseh Mohammad Reza Vesali

2012-12-01

Full Text Available Abstract Heavy metal concentrations and magnetic susceptibility of sediment samples were analyzed as indicators of urban and industrial contamination in Anzali wetland in Gilan, Iran. The aim was to investigate the suitability of magnetic properties measurements for indicating heavy metal pollution. The concentration of six heavy metals (Ni, Cr, Cd, Zn, Fe, and Pb was determined in different depths of four sediment core samples within four different regions of the wetland (Abkenar, Hendekhaleh, Shijan and Siakeshim. Average concentration of heavy metals in the sediment cores was higher than the severe effect level (SEL for Ni, Cr and Fe (77.26, 113.63 ppm and 5.2%, respectively and lower than SEL for Cd, Zn and Pb (0.84, 137.7, 29.77 ppm, respectively. It was found that the trend of metal concentrations with the depth is different in each core and is related to the pollution discharges into the rivers entering the wetland. Core magnetic susceptibility measurements also showed different magnetic properties in each core. Cluster analysis was applied using Pearson correlation coefficient between heavy metal concentrations and magnetic properties across each core. Significant relationship was found to exist between magnetic susceptibility and the concentration of Ni in Abkenar and the concentration of Fe in other regions. Whereas Abkenar is almost the isolated and uncontaminated region of the wetland, it revealed a difference in magnetic properties between contaminated and uncontaminated sediments. It was concluded that magnetic properties of samples from contaminated zone were mostly related to Fe content. The result of this study demonstrated that magnetic susceptibility measurements could be applied as a proxy method for heavy metal pollution determination in marine environments in Iran especially as a rapid and cost-effective introductory site assessments.

Development of assessment methods for transport and storage containers with higher content of metallic recycling material

International Nuclear Information System (INIS)

Zencker, U.; Qiao Linan; Droste, B.

2004-01-01

The mechanical behaviour of transport and storage containers made of ductile cast iron melted with higher content of metallic recycling material from decommissioning and dismantling of nuclear installations is investigated. With drop tests of cubic container-like models, the influence of different real targets on the stresses in the cask body and the fracture behaviour is examined. A test stand foundation is suggested, which can be manufactured simply and improves the reproducibility of the test results strongly. The test objects are partially equipped with artificial cracklike defects. Dynamic fracture mechanics analyses of these defects were performed by means of finite element calculations to uncover safety margins. Numerous test results show depending on the requirements that containers for final disposal can be built by means of a ductile cast iron with fracture toughness more than half under the lower bound value for the licensed material qualities yet. The application limits of the material are determined also by the opportunities of the safety assessment methods. This project supports the application of brittle fracture safe transport and storage packages for radioactive materials as recommended in App. VI of the Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material (IAEA No. TS-G-1.1)

Development of assessment methods for transport and storage containers with higher content of metallic recycling material

Energy Technology Data Exchange (ETDEWEB)

Zencker, U.; Qiao Linan; Droste, B. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

2004-07-01

The mechanical behaviour of transport and storage containers made of ductile cast iron melted with higher content of metallic recycling material from decommissioning and dismantling of nuclear installations is investigated. With drop tests of cubic container-like models, the influence of different real targets on the stresses in the cask body and the fracture behaviour is examined. A test stand foundation is suggested, which can be manufactured simply and improves the reproducibility of the test results strongly. The test objects are partially equipped with artificial cracklike defects. Dynamic fracture mechanics analyses of these defects were performed by means of finite element calculations to uncover safety margins. Numerous test results show depending on the requirements that containers for final disposal can be built by means of a ductile cast iron with fracture toughness more than half under the lower bound value for the licensed material qualities yet. The application limits of the material are determined also by the opportunities of the safety assessment methods. This project supports the application of brittle fracture safe transport and storage packages for radioactive materials as recommended in App. VI of the Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material (IAEA No. TS-G-1.1).

Measuring probe and method for determining the oxygen content in gases, vapors, and liquids, especially in liquid metals

International Nuclear Information System (INIS)

Sundermann, H.; Andrae, U.

1978-01-01

The invention is concerned with the improvement of the measuring probe described in the main patent no. 1798002 with which the oxygen content in liquid metals, e.g. Na, is to be determined. In order to avoid the glass stopper shutting off the reference space having to be ground out it is proposed to connect the solid electrolyte firmly and hermetically with a metallic mounting support (e.g. Fe-Co-Ni alloy), having got the same thermal coefficient of expansion as the solid electrolyte (e.g. zirconium dioxide stabilized with ythium oxide or thorium dioxide). Further details of the design are very explicitly described. (HP) [de

Improvements in or relating to processes for reducing the oxygen content of metal oxides

International Nuclear Information System (INIS)

James, R.H.; Spooner, J.A.

1980-01-01

A process is described for reducing the oxygen content of a metal oxide material (such as an intimate mixture of uranium and plutonium oxides or a mixed oxide of uranium and plutonium) by contacting the material with a hydrogen-containing gas at an elevated temperature, wherein the material is contained in a plurality of carbon crucibles, each crucible having apertured ends and being otherwise a closed vessel, the crucibles being moved through a heated zone in end-to-end contact and thereby forming a duct through which the gas is passed counter-current to the direction of movement of the crucibles. (author)

Gate metal dependent electrical characteristics of AlGaN/GaN HEMTs

International Nuclear Information System (INIS)

Koo, Sang-Mo; Kang, Min-Seok

2014-01-01

Highlights: • We investigated transfer characteristics of AlGaN/GaN high electron mobility transistors. • We demonstrate the effect of the barrier height of Schottky gate metals. • The conduction mechanisms examine by comparing the experimental results with numerical simulations. • 2-DEG concentration depends on the barrier height of Schottky gate metals. - Abstract: We investigated transfer characteristics of AlGaN/GaN high electron mobility transistors (HEMTs) and the effect of the barrier height of Schottky gate metals. It is found that the threshold voltage of the HEMT structures with the Ni Schottky contact shows a positive shift compared to that of the Ti Schottky contacts (ΔV th = 2.9 V). The maximum saturation current of the HEMT structures with the Ti Schottky contact (∼1.4 × 10 7 A/cm 2 ) is found to be ∼2.5 times higher than that of the Ni Schottky contact (2.9 × 10 7 A/cm 2 ). The conduction mechanisms have been examined by comparing the experimental results with numerical simulations, which confirm that the increased barrier height is mainly attributed to the reduction of 2-DEG concentration

Gate metal dependent electrical characteristics of AlGaN/GaN HEMTs

Energy Technology Data Exchange (ETDEWEB)

Koo, Sang-Mo, E-mail: smkoo@kw.ac.kr; Kang, Min-Seok, E-mail: hyde0220@gmail.com

2014-10-15

Highlights: • We investigated transfer characteristics of AlGaN/GaN high electron mobility transistors. • We demonstrate the effect of the barrier height of Schottky gate metals. • The conduction mechanisms examine by comparing the experimental results with numerical simulations. • 2-DEG concentration depends on the barrier height of Schottky gate metals. - Abstract: We investigated transfer characteristics of AlGaN/GaN high electron mobility transistors (HEMTs) and the effect of the barrier height of Schottky gate metals. It is found that the threshold voltage of the HEMT structures with the Ni Schottky contact shows a positive shift compared to that of the Ti Schottky contacts (ΔV{sub th} = 2.9 V). The maximum saturation current of the HEMT structures with the Ti Schottky contact (∼1.4 × 10{sup 7} A/cm{sup 2}) is found to be ∼2.5 times higher than that of the Ni Schottky contact (2.9 × 10{sup 7} A/cm{sup 2}). The conduction mechanisms have been examined by comparing the experimental results with numerical simulations, which confirm that the increased barrier height is mainly attributed to the reduction of 2-DEG concentration.

IEP as a parameter characterizing the pH-dependent surface charging of materials other than metal oxides.

Science.gov (United States)

Kosmulski, Marek

2012-01-01

The numerical values of points of zero charge (PZC, obtained by potentiometric titration) and of isoelectric points (IEP) of various materials reported in the literature have been analyzed. In sets of results reported for the same chemical compound (corresponding to certain chemical formula and crystallographic structure), the IEP are relatively consistent. In contrast, in materials other than metal oxides, the sets of PZC are inconsistent. In view of the inconsistence in the sets of PZC and of the discrepancies between PZC and IEP reported for the same material, it seems that IEP is more suitable than PZC as the unique number characterizing the pH-dependent surface charging of materials other than metal oxides. The present approach is opposite to the usual approach, in which the PZC and IEP are considered as two equally important parameters characterizing the pH-dependent surface charging of materials other than metal oxides. Copyright © 2012 Elsevier B.V. All rights reserved.

Trace metal contents in barbeque (BBQ) charcoal products

Energy Technology Data Exchange (ETDEWEB)

Kabir, Ehsanul [Department of Environment and Energy, Sejong University, 98 Goon Ja Dong, Seoul 143-747 (Korea, Republic of); Kim, Ki-Hyun, E-mail: khkim@sejong.ac.kr [Department of Environment and Energy, Sejong University, 98 Goon Ja Dong, Seoul 143-747 (Korea, Republic of); Yoon, H.O. [Korea Basic Science Institute, Seoul Center, Seoul 136-701 (Korea, Republic of)

2011-01-30

In this study, the concentrations of trace elements contained in solid barbeque (BBQ) charcoal products have been investigated. Eleven brands of charcoal products were analyzed, consisting of both Korean (3 types) and imported products (eight types from three countries) commonly available in the Korean market places. The concentrations of trace metals in solid charcoal varied widely across metal types and between samples with the overall range of 5 {mu}g kg{sup -1} (As) to 118 mg kg{sup -1} (Zn). The patterns of metal distribution between different products appeared to be affected by the properties of raw materials and/or the processes involved in their production. Although concentrations of certain trace metals were significantly high in certain charcoal samples, their emission concentrations were below legislative guidelines (e.g., the permissible exposure limit (PEL) set by the Occupational Safety and Health Administration (OSHA)). In light of the potential harm of grilling activities, proper regulation should be considered to control the use of BBQ charcoal from a toxicological viewpoint to help reduce the potential health risks associated with its use.

Trace metal contents in barbeque (BBQ) charcoal products

International Nuclear Information System (INIS)

Kabir, Ehsanul; Kim, Ki-Hyun; Yoon, H.O.

2011-01-01

In this study, the concentrations of trace elements contained in solid barbeque (BBQ) charcoal products have been investigated. Eleven brands of charcoal products were analyzed, consisting of both Korean (3 types) and imported products (eight types from three countries) commonly available in the Korean market places. The concentrations of trace metals in solid charcoal varied widely across metal types and between samples with the overall range of 5 μg kg -1 (As) to 118 mg kg -1 (Zn). The patterns of metal distribution between different products appeared to be affected by the properties of raw materials and/or the processes involved in their production. Although concentrations of certain trace metals were significantly high in certain charcoal samples, their emission concentrations were below legislative guidelines (e.g., the permissible exposure limit (PEL) set by the Occupational Safety and Health Administration (OSHA)). In light of the potential harm of grilling activities, proper regulation should be considered to control the use of BBQ charcoal from a toxicological viewpoint to help reduce the potential health risks associated with its use.

Assessment of heavy metal contents of green leafy vegetables

Directory of Open Access Journals (Sweden)

V. Jena

2013-01-01

Full Text Available Vegetables are rich sources of vitamins, minerals, and fibers, and have beneficial antioxidative effects. Ingestion of vegetables containing heavy metals is one of the main routes through which these elements enter the human body. Slowly released into the body, however, heavy metals can cause an array of diseases. In this study we investigated the concentrations of copper, chromium, zinc, and lead in the most frequently consumed vegetables including Pimpinella anisum, Spinacia oleracea, Amaranthus viridis, Coriandrum sativum, and Trigonella foenum graecum in various sites in Raipur city, India. Atomic absorption spectrophotometry was used to estimate the levels of these metals in vegetables. The mean concentration for each heavy metal in the samples was calculated and compared with the permissible levels set by the Food and Agriculture Organization and World Health Organization. The intake of heavy metals in the human diet was also calculated to estimate the risk to human health. Our findings indicated the presence of heavy metals in vegetables in the order of Cr > Zn > Cu > Pb. Based on these findings, we conclude that the vegetables grown in this region are a health hazard for human consumption.

The subcellular localization of yeast glycogen synthase is dependent upon glycogen content

OpenAIRE

Wilson, Wayne A.; Boyer, Michael P.; Davis, Keri D.; Burke, Michael; Roach, Peter J.

2010-01-01

The budding yeast, Saccharomyces cerevisiae, accumulates the storage polysaccharide glycogen in response to nutrient limitation. Glycogen synthase, the major form of which is encoded by the GSY2 gene, catalyzes the key regulated step in glycogen storage. Here, we utilize Gsy2p fusions to green fluorescent protein (GFP) to determine where glycogen synthase is located within cells. We demonstrate that the localization pattern of Gsy2-GFP depends upon the glycogen content of the cell. When glyco...

Content of heavymetals in Gentiana lutea L. roots and galenic forms

Directory of Open Access Journals (Sweden)

DRAGOJA RADANOVIC

2007-02-01

Full Text Available An experimental field for the cultivated production of Gentiana lutea L. was established five years ago at the Suvobor Mountain, Serbia. Soil analysis of this area revealed the occurrence of high pseudo-total (Ni – 1270 mg/kg, Cr – 423 mg/kg, Co – 385 mg/kg and available (especially Ni – 133 mg/kg heavy metals contents in the soil. Hence, the aim of this research was to evaluate the quality of Gentiana lutea L. – roots and galenic forms (liquid extract in 70 % ethanol, spissum and siccum produced from the roots, because, for most plants, heavy metals accumulate in the root tissue. The amounts of Ni and Cr found in the analyzed roots were very high (54 mg/kg and 14 mg/kg, respectively. The efficiency of ethanol in extracting heavy metals from the roots varied depending on the particular element. The highest efficiency was obtained for Ni (41.3 %, then for Cd (39.5 %, Pb (37.0% and Co (30.4 %. According to this, a potential hazard exists for humans, if gentian's galenic forms are produced from the raw material with high heavy metals contents. It is concluded that quality control of the raw material must be carried out before further utilization of gentian.

Polymeric supported sorbents for decreasing hazardous metal ions content in wet process phosphoric acid

International Nuclear Information System (INIS)

El-Zahhar, A.A.; El-Naggar, H.A.; Ahmed, M.

2005-01-01

Procedure for preparation of polymeric supported silica, and their usage for decreasing hazardous metal ion content in wet process phosphoric acid was developed. The procedure is based firstly on extraction silica from rice straw by alkaline treatment , secondly supporting the produced silica on binding polyacrylonitrile (PAN). The produced polymer based sorbent was used for decreasing hazardous metal ions (especially iron) present as inorganic impurities in crud Egyptian phosphoric acid (green acid). Different factors affecting the sorption equilibrium ( contact time, temperature , sorbent mass and batch factor ) were studied. Studying the sorption isotherm revealed that the adsorption data could favorably fit the Langmuir adsorption isotherm. In the dynamic study , the sorption capacity at (Cξ/Cο = 50%) was found to be 28.5 mg/g and the loaded column could be regenerated using 50ml of 0.15 M HNO 3 . The regenerated column could undergo sorption regeneration cycles up to four cycles without significant decrease in the sorption capacity , weight loss or change in the physical properties of the sorbent

A COMPARISON OF METHODS FOR DETERMINING THE MOLECULAR CONTENT OF MODEL GALAXIES

International Nuclear Information System (INIS)

Krumholz, Mark R.; Gnedin, Nickolay Y.

2011-01-01

Recent observations indicate that star formation occurs only in the molecular phase of a galaxy's interstellar medium. A realistic treatment of star formation in simulations and analytic models of galaxies therefore requires that one determine where the transition from the atomic to molecular gas occurs. In this paper, we compare two methods for making this determination in cosmological simulations where the internal structures of molecular clouds are unresolved: a complex time-dependent chemistry network coupled to a radiative transfer calculation of the dissociating ultraviolet (UV) radiation field and a simple time-independent analytic approximation. We show that these two methods produce excellent agreement at all metallicities ∼>10 -2 of the Milky Way value across a very wide range of UV fields. At lower metallicities the agreement is worse, likely because time-dependent effects become important; however, there are no observational calibrations of molecular gas content at such low metallicities, so it is unclear if either method is accurate. The comparison suggests that, in many but not all applications, the analytic approximation provides a viable and nearly cost-free alternative to full time-dependent chemistry and radiative transfer.

Phytotoxicity of thallium (Tl) in culture solution. Pt. 2. Effects of Tl(III) on the growth and heavy metal contents of pea and field bean plants

Energy Technology Data Exchange (ETDEWEB)

Pieper, B; Austenfeld, F A

1985-01-01

The effects of Tl(NO/sub 3/)/sub 3/ and Tl(III)EDTA on growth and heavy metal contents of pea plants and field bean plants were compared in hydroponic culture experiments. In the presence of Tl(NO/sub 3/)/sub 3/, the essential heavy metals were available to the plants in their ionic forms. When Tl(III)EDTA was present the essential heavy metals were available as chelated complexes. Dry matter production of the pea plants was inhibited to a greater extent by Tl(III)EDTA than by Tl(NO/sub 3/)/sub 3/. The distribution of Tl within the plant was unaffected by the accompanying anion, however an increase of the Tl content of the stems and the leaves was observed in the presence of Tl(III)EDTA. The micronutrients exhibited different interactions with Tl(III). In the presence of increasing concentrations of Tl(NO/sub 3/)/sub 3/ the Mn content of each organ and the Zn content of the roots were lowered, but the Zn content of the stems was increased. Increasing concentrations of Tl(III)EDTA resulted only in a decrease of the Mn content of the roots, but in an increase of the contents of Fe and Mn within the stems, and Fe, Mn, Zn, and Cu within the leaves. The increases may be due to concentration by growth inhibition. In contrast to pea plants, growth of field bean plants was inhibited only by Tl(NO/sub 3/)/sub 3/. The field bean plants retained most of the Tl within the roots independent of the Tl compound in the solution. Chelation of Tl(III) resulted in higher Tl contents of both the roots and the stems, but equal or reduced Tl contents of the leaves. Whereas increasing concentrations of Tl(NO/sub 3/)/sub 3/ reduced the Mn content of each organ as well as the Zn content of the roots and the leaves, Tl(III)EDTA only reduced the Mn content of the roots.

Application of a modified BCR sequential extraction (three-step) procedure for the determination of extractable trace metal contents in a sewage sludge amended soil reference material (CRM 483), complemented by a three-year stability study of acetic acid and EDTA extractable metal content.

Science.gov (United States)

Rauret, G; López-Sánchez, J F; Sahuquillo, A; Barahona, E; Lachica, M; Ure, A M; Davidson, C M; Gomez, A; Lück, D; Bacon, J; Yli-Halla, M; Muntau, H; Quevauviller, P

2000-06-01

This paper provides additional data on a sewage sludge amended soil certified reference material, CRM 483, which was certified in 1997 for its EDTA and acetic acid extractable contents of some trace metals, following standardised extraction procedures. The additional work aimed to test the long-term stability of the material and the applicability of an improved version of the BCR three-step sequential extraction procedure on the sewage sludge amended soil (CRM 483). The paper demonstrates the CRM 483 long-term stability for EDTA and acetic acid extractable contents of Cd, Cr, Cu, Ni, Pb and Zn and gives the results (obtained in the framework of an interlaboratory study) for the extractable contents of the same elements in the CRM 483, following the BCR three-step sequential extraction scheme. The aqua regia extractable contents following the ISO 11466 Standard are also given. The data are given as indicative (not certified) values.

Temperature-dependence of Threshold Current Density-Length Product in Metallization Lines: A Revisit

International Nuclear Information System (INIS)

Duryat, Rahmat Saptono; Kim, Choong-Un

2016-01-01

One of the important phenomena in Electromigration (EM) is Blech Effect. The existence of Threshold Current Density-Length Product or EM Threshold has such fundamental and technological consequences in the design, manufacture, and testing of electronics. Temperature-dependence of Blech Product had been thermodynamically established and the real behavior of such interconnect materials have been extensively studied. The present paper reviewed the temperature-dependence of EM threshold in metallization lines of different materials and structure as found in relevant published articles. It is expected that the reader can see a big picture from the compiled data, which might be overlooked when it was examined in pieces. (paper)

Assessing the Heavy Metal Content in Forest Dormouse (Dryomys nitedula Pallas, 1778 from an Agricultural Region in Bulgaria

Directory of Open Access Journals (Sweden)

Georgi G. Markov

2016-06-01

Full Text Available The heavy metals load in the forest dormouse (Dryomys nitedula, inhabiting in forest shelter belts in the agricultural region was assessed. The concentrations of Cd, Co, Cu, Ni, Pb and Zn (expressed in mg/kg of dry tissue were established in the liver, using an atomic-absorption analysis. The fact that the highly toxic metals (Cd and Pb were found in considerable concentrations together with other metals with concentration dependent toxic effect (Cu, Ni, Zn and Co in the liver of forest dormice, suggests that it is necessary to carry out regular assessment and forecasting of accumulation of these metals in species, which are not direct targets of cultivation and control activities in agricultural ecosystems. The obtained values were used to create a baseline for estimation of heavy metal accumulation in the internal organs of the forest dormouse, both in anthropogenically transformed habitats and natural biotopes, as well as for using this species as a monitor of environmental status.

Simulation of Zr content in TiZrCuNi brazing filler metal for Ti6Al4V alloy

International Nuclear Information System (INIS)

Yue, Xishan; Xie, Zonghong; Jing, Yongjuan

2017-01-01

To optimize the Zr content in Ti-based filler metal, the covalent electron on the nearest atoms bond in unit cell (n_A"u"-"v) with Ti-based BCC structure was calculated, in which the brazing temperature was considered due to its influence on the lattice parameter. Based on EET theory (The Empirical Electron Theory for solid and molecules), n_A"u"-"v represents the strength of the unit cell with defined element composition and structure, which reflects the effect from solid solution strengthening on the strength of the unit cell. For Ti-Zr-15Cu-10Ni wt% filler metal, it kept constant as 0.3476 with Zr as 37.5 ∝ 45 wt% and decreased to 0.333 with Zr decreasing from 37.5 to 25 wt%. Finally, it increased up to 0.3406 with Zr as 2 ∝ 10 wt%. Thus, Ti-based filler metal with Zr content being 2 ∝ 10 wt% is suggested based on the simulation results. Moreover, the calculated covalent electron of n_A"u"-"v showed good agreement with the hardness of the joint by filler 37.5Zr and 10Zr. The composition of Ti-10Zr-15Cu-10Ni wt% was verified in this study with higher tensile strength of the brazing joint and uniform microstructure of the interface. (orig.)

Simulation of Zr content in TiZrCuNi brazing filler metal for Ti6Al4V alloy

Energy Technology Data Exchange (ETDEWEB)

Yue, Xishan [Northwestern Polytechnical University, School of Astronautics, Xi' an (China); AVIC Beijing Aeronautical Manufacturing Technology Research Institute, Aeronautical Key Laboratory for Welding and Joining Technology, Beijing (China); Xie, Zonghong [Northwestern Polytechnical University, School of Astronautics, Xi' an (China); Jing, Yongjuan [AVIC Beijing Aeronautical Manufacturing Technology Research Institute, Aeronautical Key Laboratory for Welding and Joining Technology, Beijing (China)

2017-07-15

To optimize the Zr content in Ti-based filler metal, the covalent electron on the nearest atoms bond in unit cell (n{sub A}{sup u-v}) with Ti-based BCC structure was calculated, in which the brazing temperature was considered due to its influence on the lattice parameter. Based on EET theory (The Empirical Electron Theory for solid and molecules), n{sub A}{sup u-v} represents the strength of the unit cell with defined element composition and structure, which reflects the effect from solid solution strengthening on the strength of the unit cell. For Ti-Zr-15Cu-10Ni wt% filler metal, it kept constant as 0.3476 with Zr as 37.5 ∝ 45 wt% and decreased to 0.333 with Zr decreasing from 37.5 to 25 wt%. Finally, it increased up to 0.3406 with Zr as 2 ∝ 10 wt%. Thus, Ti-based filler metal with Zr content being 2 ∝ 10 wt% is suggested based on the simulation results. Moreover, the calculated covalent electron of n{sub A}{sup u-v} showed good agreement with the hardness of the joint by filler 37.5Zr and 10Zr. The composition of Ti-10Zr-15Cu-10Ni wt% was verified in this study with higher tensile strength of the brazing joint and uniform microstructure of the interface. (orig.)

Heavy metals contents in agricultural topsoils in the Ebro basin (Spain). Application of the multivariate geoestatistical methods to study spatial variations

International Nuclear Information System (INIS)

Rodriguez Martin, Jose Antonio; Arias, Manuel Lopez; Grau Corbi, Jose Manuel

2006-01-01

In this work the content of seven heavy metals (Cd, Cr, Cu, Hg, Ni, Pb and Zn) and other parameters (the pH, organic matter, carbonates and granulometric fraction) in agricultural topsoil in the Ebro basin are quantified, based on 624 samples collected according to an 8 by 8 km square mesh. The average concentrations (mg/kg) obtained were: Cd 0.415 ± 0.163, Cr 20.27 ± 13.21, Cu 17.33 ± 14.97, Ni 20.50 ± 22.71, Pb 17.54 ± 10.41, Zn 17.53 ± 24.19 and Hg 35.6 ± 42.05 μg/kg. The concentration levels are relatively low in areas of high pH and low organic matter content concentration. The results of factor analysis group Cd, Cu, Hg, Pb and Zn in F1 and Cr y Ni in F2. The spatial heavy metals component maps based on geostatistical analysis, show definite association of these factors with the soil parent material. The local anomalies (found in Cu, Zn and Pb) are attributed to anthropogenic influence. - Geostatistical analyses showed definite association of metals with soil parent materials

Influence of organic matter transformations on the bioavailability of heavy metals in a sludge base compost

International Nuclear Information System (INIS)

Molina, M. J.; Ingelmo, F.; Soriano, M. D.; Gallardo, A.; Lapena, L.

2009-01-01

The agricultural use of anaerobically digested sewage sludge (ADSS) as stable, mature compost implies knowing its total content in heavy metals and their bioavailability. since the chemical form of the metal in the sewage sludge-based compost depends on the effect of stabilization and maturation of the organic material during composting, the objective of this work was to examine the relationships between the changes in the organic matter content and humus fractions, and the bioavailability of heavy metals in a mixture of ADSS and wood chips (70:30 on wet basis) with an initial C/N ratio of 30.4, during its aerobic batch composting at 30 degree centigrade of external temperature in an open type lab-scale reactor with-out lixiviation. (Author)

Influence of organic matter transformations on the bioavailability of heavy metals in a sludge base compost

Energy Technology Data Exchange (ETDEWEB)

Molina, M. J.; Ingelmo, F.; Soriano, M. D.; Gallardo, A.; Lapena, L.

2009-07-01

The agricultural use of anaerobically digested sewage sludge (ADSS) as stable, mature compost implies knowing its total content in heavy metals and their bioavailability. since the chemical form of the metal in the sewage sludge-based compost depends on the effect of stabilization and maturation of the organic material during composting, the objective of this work was to examine the relationships between the changes in the organic matter content and humus fractions, and the bioavailability of heavy metals in a mixture of ADSS and wood chips (70:30 on wet basis) with an initial C/N ratio of 30.4, during its aerobic batch composting at 30 degree centigrade of external temperature in an open type lab-scale reactor with-out lixiviation. (Author)

Trace metal contents of selected seeds and vegetables from oil producing areas of Nigeria.

Science.gov (United States)

Wegwu, Matthew O; Omeodu, Stephen I

2010-07-01

The concentrations of accumulated trace metals in selected seeds and vegetables collected in the oil producing Rivers State of Nigeria were investigated. The values were compared with those of seeds and vegetables cultivated in Owerri, a less industrialized area in Nigeria. The lead (Pb) and cadmium (Cd) contents of the seeds obtained from Rivers State ranged between 0.10 and 0.23 microg/g dry weight, while those of the seeds cultivated in Owerri fell below the detection limit of 0.01 microg/g dry weight. The highest manganese (Mn) level (902 microg/g dry weight) was found in Irvingia garbonesis seeds cultivated in Rivers State. Similarly, the highest nickel (Ni) value (199 microg/g dry weight) was also obtained in I. garbonesis, however, in the seeds sampled in Owerri. The highest copper (Cu), zinc (Zn), and iron (Fe) levels (16.8, 5.27, and 26.2 microg/g dry weight, resp.) were detected in seeds collected in Rivers State. With the exception of Talinum triangulae, Ocinum gratissimum, and Piper guineese, with Pb levels of 0.09, 0.10, and 0.11 microg/g dry weight, respectively, the Pb and Cd levels in the vegetables grown in Owerri fell below the detection limit of 0.01 microg/g dry weight. The trace metal with the highest levels in all the vegetables studied was Mn, followed by Fe. The highest concentrations of Ni and Cu occurred in vegetables collected from Rivers State, while the highest level of Zn was observed in Piper guineese collected in Owerri, with a value of 21.4 microg/g dry weight. Although the trace metal concentrations of the seeds and vegetables collected in Rivers State tended to be higher than those of the seeds and vegetables grown in Owerri, the average levels of trace metals obtained in this study fell far below the WHO specifications for metals in foods.

Terrestrial sedimentary pyrites as a potential source of trace metal release to groundwater – A case study from the Emsland, Germany

International Nuclear Information System (INIS)

Houben, Georg J.; Sitnikova, Maria A.; Post, Vincent E.A.

2017-01-01

Pyrite is a common minor constituent of terrestrial freshwater sediments and a sink for trace elements. Different amounts and morphological types (framboids and euhedral crystals) of sedimentary pyrites were found in the heavy mineral fraction of cores obtained from several drillholes located in the Emsland region, NW Germany. Their trace element contents were investigated to assess their potential for groundwater contamination after oxidation, e.g. induced by dewatering or autotrophic denitrification. Nickel, arsenic and cadmium were found in significant concentrations in pyrite. Geochemical modeling showed that elevated trace metal concentrations in groundwater, potentially exceeding drinking water standards, should preferentially occur in a less than 1 m thick zone situated around the depth of the redoxcline, where nitrate is reduced by pyrite. This was confirmed by depth-specific groundwater sampling in the Emsland and by previously published studies. The absolute concentration of released trace metals depends on their content in the pyrite but also strongly on the nitrate load of groundwater. - Highlights: • Pyrite from heavy mineral fraction of aquifer sediment analyzed for trace metal content. • Pyrites contain significant concentration of trace metals, such as nickel, arsenic, cadmium. • Trace elements are released by autotrophic denitrification. • Reactive transport model predicts small zone of trace element accumulation. • Release of trace elements strongly dependent on nitrate content of groundwater.

Upgrading platform using alkali metals

Science.gov (United States)

Gordon, John Howard

2014-09-09

A process for removing sulfur, nitrogen or metals from an oil feedstock (such as heavy oil, bitumen, shale oil, etc.) The method involves reacting the oil feedstock with an alkali metal and a radical capping substance. The alkali metal reacts with the metal, sulfur or nitrogen content to form one or more inorganic products and the radical capping substance reacts with the carbon and hydrogen content to form a hydrocarbon phase. The inorganic products may then be separated out from the hydrocarbon phase.

Investigation of possibilities for high heavy metal content sludges utilization by incorporating them in concrete products

Directory of Open Access Journals (Sweden)

Simeonova A.

2006-01-01

Full Text Available The safe removal of sludge, obtained during the surface treatment of different metal products, is a serious environmental problem. These sludges are usually characterized by a high content of heavy metals (Pb, Cu, Ni, Zn, Cr, Cd, Mn, low quality and are obtained in many small industrial units in the whole country, which makes their centralized treatment difficult. In world practice, different methods are used for component fixation of such sludge, in the aim to prevent leaching of the metals causing pollution of the soil and underground water. The aim of the recent work is to prepare the sludge in a form of light (keramzit fillers by preliminary treatment with binding substances and to introduce them in non supporting concrete products - curbs, stakes and similar products. The investigation was made with two types of sludge - from a production line for thermal treatment and hardening of different parts used in machine building and from a production line for surface decoration treatment (nickel-plating and chromium-plating of consumer products. The sludge were dried and ground and then granulated with a solution of water glass. After their solidifying the air dried granules with a size of 5 to 15 mm were treated with cement milk and air dried again. With the obtained granules, standard percolation test for leaching metals like Pb, Cu, Zn, Ni and Cr was carried out. After a preliminary calculation of concrete mixtures, these granules were mixed with Portland cement and concrete sample products were made. These molded concrete samples were characterized by their density, water absorption, and mechanical strength for defined standard periods of time. The samples were subjected to a modified percolation test for leaching metals. The metal concentration in eluates was determined by Atomic Spectral Analysis.

Photoreactivity of Metal-Organic Frameworks in Aqueous Solutions: Metal Dependence of Reactive Oxygen Species Production.

Science.gov (United States)

Liu, Kai; Gao, Yanxin; Liu, Jing; Wen, Yifan; Zhao, Yingcan; Zhang, Kunyang; Yu, Gang

2016-04-05

Promising applications of metal-organic frameworks (MOFs) in various fields have raised concern over their environmental fate and safety upon inevitable discharge into aqueous environments. Currently, no information regarding the transformation processes of MOFs is available. Due to the presence of repetitive π-bond structure and semiconductive property, photochemical transformations are an important fate process that affects the performance of MOFs in practical applications. In the current study, the generation of reactive oxygen species (ROS) in isoreticular MIL-53s was studied. Scavengers were employed to probe the production of (1)O2, O2(•-), and •OH, respectively. In general, MIL-53(Cr) and MIL-53(Fe) are dominated by type I and II photosensitization reactions, respectively, and MIL-53(Al) appears to be less photoreactive. The generation of ROS in MIL-53(Fe) may be underestimated due to dismutation. Further investigation of MIL-53(Fe) encapsulated diclofenac transformation revealed that diclofenac can be easily transformed by MIL-53(Fe) generated ROS. However, the cytotoxicity results implied that the ROS generated from MIL-53s have little effect on the viability of the human hepatocyte (HepG2) cell line. These results suggest that the photogeneration of ROS by MOFs may be metal-node dependent, and the application of MIL-53s as drug carriers needs to be carefully considered due to their high photoreactivity.

Graphene-Reinforced Metal and Polymer Matrix Composites

Science.gov (United States)

Kasar, Ashish K.; Xiong, Guoping; Menezes, Pradeep L.

2018-06-01

Composites have tremendous applicability due to their excellent capabilities. The performance of composites mainly depends on the reinforcing material applied. Graphene is successful as an efficient reinforcing material due to its versatile as well as superior properties. Even at very low content, graphene can dramatically improve the properties of polymer and metal matrix composites. This article reviews the fabrication followed by mechanical and tribological properties of metal and polymer matrix composites filled with different kinds of graphene, including single-layer, multilayer, and functionalized graphene. Results reported to date in literature indicate that functionalized graphene or graphene oxide-polymer composites are promising materials offering significantly improved strength and frictional properties. A similar trend of improved properties has been observed in case of graphene-metal matrix composites. However, achieving higher graphene loading with uniform dispersion in metal matrix composites remains a challenge. Although graphene-reinforced composites face some challenges, such as understanding the graphene-matrix interaction or fabrication techniques, graphene-reinforced polymer and metal matrix composites have great potential for application in various fields due to their outstanding properties.

Dependence of the velocity ellipsoid for nearby stars upon metallicity and spectral type

International Nuclear Information System (INIS)

Suchkov, A.A.

1983-01-01

For nearby dwarf stars the ratios of the dispersions in the velocity components along the axes of a rectangular galactic coordinate system depend on spectral type and chemical composition (metal abundance). Relationships are established which could provide clues to such problems as whether the component populations of the Galaxy are relaxing to a steady state and how stars come to be formed with differing mass at different times

Frequency, moisture content, and temperature dependent dielectric properties of potato starch related to drying with radio-frequency/microwave energy.

Science.gov (United States)

Zhu, Zhuozhuo; Guo, Wenchuan

2017-08-24

To develop advanced drying methods using radio-frequency (RF) or microwave (MW) energy, dielectric properties of potato starch were determined using an open-ended coaxial-line probe and network analyzer at frequencies between 20 and 4,500 MHz, moisture contents between 15.1% and 43.1% wet basis (w.b.), and temperatures between 25 and 75 °C. The results showed that both dielectric constant (ε') and loss factor (ε″) were dependent on frequency, moisture content, and temperature. ε' decreased with increasing frequency at a given moisture content or temperature. At low moisture contents (≤25.4% w.b.) or low temperatures (≤45 °C), ε″ increased with increasing frequency. However, ε″ changed from decrease to increase with increasing frequency at high moisture contents or temperatures. At low temperatures (25-35 °C), both ε' and ε″ increased with increasing moisture content. At low moisture contents (15.1-19.5% w.b.), they increased with increasing temperature. The change trends of ε' and ε″ were different and dependent on temperature and moisture content at their high levels. The penetration depth (d p ) decreased with increasing frequency. RF treatments may provide potential large-scale industrial drying application for potato starch. This research offers useful information on dielectric properties of potato starch related to drying with electromagnetic energy.

Electrical conductivity dependence of thin metallic films of Au and Pd as a top electrode in capacitor applications

International Nuclear Information System (INIS)

Nazarpour, S.; Langenberg, E.; Jambois, O.; Ferrater, C.; Garcia-Cuenca, M.V.; Polo, M.C.; Varela, M.

2009-01-01

Electrical conductivity dependence of thin metallic films of Au and Pd over the different perovskites was investigated. It is found from electrical properties that crystallographic growth orientation of Au and Pd thin layers attained from X-ray diffraction results indicate the slop of current (I)-voltage (V) plots. Besides, surface morphology and topography was considered using Field Emission Scanning Electron Microscopy and Atomic Force Microscopy, respectively. Obtained results showed the Stranski-Krastanov growth of the Pd and Au. Indeed, diminishing of the root-mean-square roughness of Pd/BiMnO 3 /SrTiO 3 following by Au deposition should be concerned due to growth of Au onto the crack-like parts of the substrate. These crack-like parts appeared due to parasitic phases of the Bi-Mn-O system mainly Mn 3 O 4 (l 0 l) and Mn 3 O 4 (0 0 4 l). The different response in the electrical properties of heterostructures suggests that electrical conductance of the Au and Pd thin metallic films have the crystallographic orientation dependence. Furthermore, polycrystallinity of the thin metallic films are desired in electrode applications due to increase the conductivity of the metallic layers.

THE METALLICITY DEPENDENCE OF THE CO {yields} H{sub 2} CONVERSION FACTOR IN z {>=} 1 STAR-FORMING GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Genzel, R.; Tacconi, L. J.; Schreiber, N. M. Foerster; Gracia-Carpio, J.; Lutz, D.; Saintonge, A. [Max-Planck-Institut fuer extraterrestrische Physik (MPE), Giessenbachstr. 1, 85748 Garching (Germany); Combes, F. [Observatoire de Paris, LERMA, CNRS, 61 Av. de l' Observatoire, F-75014 Paris (France); Bolatto, A. [Department of Astronomy, University of Maryland, College Park, MD 20742-2421 (United States); Neri, R.; Cox, P. [IRAM, 300 Rue de la Piscine, 38406 St. Martin d' Heres, Grenoble (France); Sternberg, A. [Sackler School of Physics and Astronomy, Tel Aviv University, Tel Aviv 69978 (Israel); Cooper, M. C. [Department of Physics and Astronomy, Frederick Reines Hall, University of California, Irvine, CA 92697-4575 (United States); Bouche, N. [Department of Physics, University of California, Santa Barbara, Broida Hall, Santa Barbara, CA 93106 (United States); Bournaud, F. [Service d' Astrophysique, DAPNIA, CEA/Saclay, F-91191 Gif-sur-Yvette Cedex (France); Burkert, A. [Universitaetssternwarte der Ludwig-Maximiliansuniversitaet, Scheinerstr. 1, D-81679 Muenchen (Germany); Comerford, J. [Department of Astronomy and McDonald Observatory, 1 University Station, C1402 Austin, TX 78712-0259 (United States); Davis, M.; Newman, S. [Department of Astronomy, Campbell Hall, University of California, Berkeley, CA 94720 (United States); Garcia-Burillo, S. [Observatorio Astronomico Nacional-OAN, Apartado 1143, 28800 Alcala de Henares- Madrid (Spain); Naab, T., E-mail: genzel@mpe.mpg.de, E-mail: linda@mpe.mpg.de [Max-Planck Institut fuer Astrophysik (MPA), Karl Schwarzschildstrasse 1, D-85748 Garching (Germany); and others

2012-02-10

We use the first systematic samples of CO millimeter emission in z {>=} 1 'main-sequence' star-forming galaxies to study the metallicity dependence of the conversion factor {alpha}{sub CO,} from CO line luminosity to molecular gas mass. The molecular gas depletion rate inferred from the ratio of the star formation rate (SFR) to CO luminosity, is {approx}1 Gyr{sup -1} for near-solar metallicity galaxies with stellar masses above M{sub S} {approx} 10{sup 11} M{sub Sun }. In this regime, the depletion rate does not vary more than a factor of two to three as a function of molecular gas surface density or redshift between z {approx} 0 and 2. Below M{sub S} the depletion rate increases rapidly with decreasing metallicity. We argue that this trend is not caused by starburst events, by changes in the physical parameters of the molecular clouds, or by the impact of the fundamental-metallicity-SFR-stellar mass relation. A more probable explanation is that the conversion factor is metallicity dependent and that star formation can occur in 'CO-dark' gas. The trend is also expected theoretically from the effect of enhanced photodissociation of CO by ultraviolet radiation at low metallicity. From the available z {approx} 0 and z {approx} 1-3 samples we constrain the slope of the log({alpha}{sub CO})-log (metallicity) relation to range between -1 and -2, fairly insensitive to the assumed slope of the gas-SFR relation. Because of the lower metallicities near the peak of the galaxy formation activity at z {approx} 1-2 compared to z {approx} 0, we suggest that molecular gas masses estimated from CO luminosities have to be substantially corrected upward for galaxies below M{sub S}.

Possible source and pattern distribution of heavy metals content in urban soil at Kuala Terengganu town center

International Nuclear Information System (INIS)

Foo, Toon Fong; Poh, Seng Chee; Asrul Azani Mahmood; Norhayati Mohd Tahir

2008-01-01

Total concentration of five trace metals (Cu, Mn, Cd, Pb and Zn) and two major elements (Al and Fe) as well as soil parameters (soil organic matter, pH and cation exchange capacity) were measured in soils of Kuala Terengganu town center. 40 surface soils (0-20 cm) were collected during the month of August, 2005. The soil samples (< 600 μm) were subjected to acid digestion and the concentration of total metal was measured using Atomic Absorption Spectrometer. Results show that the range of metals observed were 4.16-40.90 mg/ kg, 83.70 - 380.80 mg/ kg, 2940.00 - 28600.00 mg/ kg below detection limit (BDL) - 4.88 mg/ kg, 20.00 - 219.00 mg/ kg, 7.47 - 171.00 mg/ kg and 8840.00 - 62500.00 mg/ kg for Cu, Mn, Fe, Cd, Pb, Zn and Al, respectively. Factor and Pearsons correlation analyses suggest that the Fe, Mn and Al originates from the parent materials, whereas the possible sources of Cu, Cd, Pb and Zn are due to anthropogenic input such as vehicular traffic and metal corrosion since there are no major industrial activities in Kuala Terengganu. In addition, calculation of enrichment factors (Efs) for trace metals showed that Pb, Cd and Zn were significantly enriched, providing additional support to the contention that Pb, Cd and Zn level in Kuala Terengganu town center soils are due to human related activities. (author)

Compacted sewage sludge as a barrier for tailings: the heavy metal speciation and total organic carbon content in the compacted sludge specimen.

Directory of Open Access Journals (Sweden)

Huyuan Zhang

Full Text Available Acid mine drainage (AMD was the main environmental problem facing the mining industry. For AMD had high heavy metals content and low pH, the compacted sewage sludge might be a barrier for tailings whose oxidation and weathering produced AMD, with its own carbon source, microorganism reduction ability and impermeability. To study the heavy metals environmental risk, under the simulate AMD, the deionized water (DW, and the pH 2.1 sulfuric acid water (SA seepage conditions, respectively, the changes of the chemical speciation of heavy metals Cd, Cu, Fe, Ni, Zn and total organic carbon (TOC content in the compacted sewage sludge were assessed in the different periods. The results indicated according to the distribution of heavy metals, the potential mobility was for Cd: 6.08 under AMD, 7.48 under SA, ∞ under DW; for Cu: 0.08 under AMD, 0.17 under SA, 0.59 under DW; for Fe: 0.15 under AMD, 0.22 under SA, 0.22 under DW; for Ni: 2.60 under AMD, 1.69 under SA, 1.67 under DW; and for Zn: 0.15 under AMD, 0.23 under SA and 0.21 under DW at the second checking time. TOC content firstly decreased from 67.62±0% to 66.29±0.35%, then increased to 67.74±0.65% under the AMD seepage while TOC decreased to 63.30±0.53%, then to 61.33±0.37% under the DW seepage, decreased to 63.86±0.41%, then to 63.28±0.49% under SA seepage. That indicated under the AMD seepage, the suitable microorganisms communities in the compacted sewage sludge were activated. And the heavy metals environmental risk of compacted sewage sludge was lower with AMD condition than with other two. So the compacted sewage sludge as a barrier for tailings was feasible as the aspect of environmental risk assessment.

Dynamics of the content of lipoproteins in blood serum of carp under the influence of ions of heavy metals

International Nuclear Information System (INIS)

Kurant, V.Z.; Sinyuk, Yu.V.; Arsan, V.O.; Grubyinko, V.V.

2005-01-01

A change of the content of lipoproteins in the blood serum of carp under the influence of ions of manganese, zinc, copper, and lead is studied. The important role of lipoproteins in the blood serum of fish in the processes of detoxication of ions of heavy metals that come to their organism from the water environment is shown

The Content of Heavy Metals (Cu, Zn, Cr, Ni, Pb in The Soil Near The Arterial Roads in Wroclaw (Poland

Directory of Open Access Journals (Sweden)

Sobczyk Karolina

2017-01-01

Full Text Available The concentrations of heavy metals in soils along the motorway bypass of Wroclaw (AOW and the Eastern Ring Road of Wroclaw (WOW, Poland, have been determined. The soil samples were collected from the levels of 0-25 cm within 2 m from the edge of the road. The mineralizates were prepared in HNO3, 60%, using the Microwave Digestion System. The content of Cu, Zn, Cr, Ni and Pb in soils were determined using FAAS method. The physicochemical parameters, the conductivity and pH of the soil solutions were measured to evaluate the salinity of the soils and their active and exchangeable acidity. The pollution indexes (WN showing the enrichment of soils in metals have been determined. Excess of metal concentrations in soils compared to the geochemical background in uncontaminated soils of Poland has been observed. Permissible concentrations of heavy metals relative to the standard for soils, according to the Polish Ministry of Environment Regulation from September 1st, 2016, have not been exceeded.

Specifics of surface runoff contents and treatment in large cities

OpenAIRE

V.N. Chechevichkin; N.I. Vatin

2014-01-01

The degree of surface runoff pollution in large cities has been assessed in modern conditions in the case study of production sites of St. Petersburg. Increased content of petroleum derivatives and heavy metal ions both in rainwater runoff and especially in snowmelt runoff has been revealed. It has been established that the composition of infiltration runoff from the newly built-up sites within the city limits commonly depends on their background, especially in the places of former unaut...

Studies of heavy metal contents and microbial composition of ...

African Journals Online (AJOL)

FLEXI-DONEST

the use of private electricity generating sets, in recent times, have ... soil and evaluate the impact of heavy metal on soil degradable ..... a reasonable length of time by herbivores may .... Heavy Metals in Root, Stem and Leaves of Acalypha.

Energetical fly ashes – separation and utilization of metallic valuable components

Directory of Open Access Journals (Sweden)

Michalíková Františka

2000-12-01

Full Text Available In the contribution, methods of separating metals – Fe, Al, Ge from energetic wastes – fly ashes are presented along with further possibilities of utilization of particular valuable components for industrial purposes.In the contribution, properties of energetic wastes are presented influencing the contents, separability, and utilizability of metal-bearing valuable components. From among physical properties these are grain size distribution and surface area. Chemical properties are characterized by elements contained in combusted coal whose content after combustion is increased 2 to 4 times, depending on the content of ash and combustible matters in original coal. Mineralogical properties of energetic wastes are determined by the combustion process conditions in the course of which mineral novelties are produced in concentrations suitable for separation.In the contribution, methods of separation and utilization of metals such as Fe, Al, Ge are described. From literature information on the processing of Fe component, as well as from results of experiments made at the Department of Mineral Processing and Environmental Protection, Technical University of Kosice follows that the highest concentration and mass yield of the component can be obtained from black coal fly ashes produced in smelting boilers. The content of Al in Slovak energetic wastes is lower than the 30 % Al2O3 limit that conditions an economic technological processing. Only in the case of black coal fly ash from TEKO Kosice and EVO Vojany was the Al2O3 content of 32.93 %. Therefore, in an indirect way – by separating the residues of uncombusted coal and magnetite Fe – the content of Al in fly ash was increased.For Ge, a principle of selective sizing has been utilized.A complex utilization of energetic wastes, that is the separation of metallic components, elimination of particular metals and the subsequent treatment of nonmetallic residue, should be an effective solution in various

A distance-dependent metal-enhanced fluorescence sensing platform based on molecular beacon design.

Science.gov (United States)

Zhou, Zhenpeng; Huang, Hongduan; Chen, Yang; Liu, Feng; Huang, Cheng Zhi; Li, Na

2014-02-15

A new metal-enhanced fluorescence (MEF) based platform was developed on the basis of distance-dependent fluorescence quenching-enhancement effect, which combined the easiness of Ag-thiol chemistry with the MEF property of noble-metal structures as well as the molecular beacon design. For the given sized AgNPs, the fluorescence enhancement factor was found to increase with a d(6) dependency in agreement with fluorescence resonance energy transfer mechanism at shorter distance and decrease with a d(-3) dependency in agreement with plasmonic enhancement mechanism at longer distance between the fluorophore and the AgNP surface. As a proof of concept, the platform was demonstrated by a sensitive detection of mercuric ions, using thymine-containing molecular beacon to tune silver nanoparticle (AgNP)-enhanced fluorescence. Mercuric ions were detected via formation of a thymine-mercuric-thymine structure to open the hairpin, facilitating fluorescence recovery and AgNP enhancement to yield a limit of detection of 1 nM, which is well below the U.S. Environmental Protection Agency regulation of the Maximum Contaminant Level Goal (10nM) in drinking water. Since the AgNP functioned as not only a quencher to reduce the reagent blank signal but also an enhancement substrate to increase fluorescence of the open hairpin when target mercuric ions were present, the quenching-enhancement strategy can greatly improve the detection sensitivity and can in principle be a universal approach for various targets when combined with molecular beacon design. © 2013 Elsevier B.V. All rights reserved.

Cracking of crude oil in the molten metals

Directory of Open Access Journals (Sweden)

Marat A. Glikin

2014-03-01

Full Text Available In this paper is investigated the process of crude oil and its individual fractions cracking in the molten metals medium to produce light petroleum products. Thermodynamic calculations demonstrate the possibility of using lead and tin including alloys thereof as the melt. The cracking of West Siberian crude oil is studied at temperatures 400-600 °C. It is detected that as the temperature increases there is increase of aromatic hydrocarbons and olefins content in gasoline while naphthenes, n- and i-paraffins content reduces. Optimal temperature for cracking in molten metals is ~500 °C. The use of a submerged nozzle increases the yield of light petroleum products by ~2%. The research octane number of gasoline produced is 82-87 points. It is determined that the yield of light petroleum products depending on the experimental conditions is increased from 46.9 to 55.1-61.3% wt.   

Metal diffusion from furnace tubes depends on location

International Nuclear Information System (INIS)

Albright, L.F.

1988-01-01

Studies of metal samples from an ethylene furnace on the Texas Gulf Coast, using a scanning electron microscope (SEM) and an energy dispersive X-ray analyzer (EDAX), reveal preferential diffusion of chromium, titanium, and aluminum in the coil wall to the surfaces of the tube where they form metal oxides. These elements are gradually depleted from the tube wall. Complicated surface reactions that include the formation of several metal oxides, metal sulfides, and metal-catalyzed coke also occur. Several mechanisms can be postulated as to how metal fines or compounds are formed and transferred in the coil and transfer lines exchanger (TLX) of ethylene units. These surface reactions directly or indirectly affect coke formation in the tube. Finally, creep in the coils is likely a factor in promoting corrosion. Such creep is promoted by variable temperature-time patterns to which a coil is exposed during pyrolysis, and then decoking. Periods of stress and compression occur in the coil walls. Knowledge of the diffusion and reactions that take place can result in better furnace operations and decoking procedures to extend the life of the furnace tubes. In this second installment of a four-part series, photomicrographs of four pyrolysis tube samples from the ethylene furnace indicate that significant differences existed between the outer surfaces, inner surfaces, and cross-sectional areas of the samples. The first installment of the series dealt with coke

Uranium and base metal dispersion studies in the Maquire Lake area, Saskatchewan

International Nuclear Information System (INIS)

Sopuck, V.J.; Lehto, D.A.W.; Alley, D.W.

1980-03-01

The objective of this study was to study uranium and base metal dispersion in various sample media occurring in the Maguire Lake area of Saskatchewan: bedrock, overburden, lake water, and lake sediments. Factors controlling partitioning of metals among various sample media were investigated, and lake sediment data were interpreted in terms of the factors to determine the significance of lake sediment data in indicating local mineralization. The association between organic matter contents and metal contents was found to vary between lake-center and nearshore sediments. Nickel, cobalt and zinc in lake sediments are strongly controlled by hydroxide precipitation and are less dependent on bedrock type. The concentration of Fe in center-lake sediments appears to reflect only the physicochemical parameters in the lake. Uranium and copper are strongly controlled by and preferentially concentrated in the organic matter; however, in center-lake sediments with >12 percent organic matter, U and Cu strongly reflect rock type

Heavy metals content in the stem bark of Detarium microcarpum ...

African Journals Online (AJOL)

The heavy metal analysis was carried out on the stem bark of D. microcarpum using an atomic absorption spectrophotometer (AAS). The heavy metals screened for include: lead, chromium, manganese, zinc and iron. The levels of manganese, zinc and iron were 13.91, 4.89 and 21.89 mg/L respectively. These heavy metals ...

Fluorescent derivatives of nucleotides. Metal ion interactions and pH dependency.

Science.gov (United States)

Vanderkooi, J M; Weiss, C J; Woodrow, G V

1979-02-01

The fluorescence parameters of ethenoadenosine derivatives are influenced by metal cations and pH, as summarized here. The pH profile of ethenoadenosine determined by fluorescence intensity gives a normal titration curve and is not affected by ionic strength. In contrast, the pH titration curves of etheno-ATP, etheno ADP, and etheno AMP depend upon ionic strength. At high ionic strength normal curves are obtained, whereas at low ionic strength anomalies are obtained; this suggests that the phosphates can interact with the ring, possibly by hydrogen binding to the ring nitrogens. The room temperature fluorescence of ethenoadenosine occurs from the base form, although excitation of either the acid or base forms can contribute to the emission. This result can be explained if the excited state pK is lower than the ground state pK, and if deprotonation occurs within the time scale of the excited state. At low pH values the fluorescence lifetime of the base form is dependent upon the buffer concentration, indicating that the reverse reaction, protonation, occurs. The affinity constants for the binding of metals to the ethenoadenosine phosphates resemble those for the corresponding adenosine phosphates. Ni(II) and Co(II) are more effective than Mn(II) in quenching the fluorescence of ethenoadenosine phosphates; this result is predicted by Förster's theory for energy transfer based upon the overlap between donor emission spectrum and acceptor absorption spectrum. The diamagnetic ions Mg(II), Ca(II), and Zn(II) do not appear to affect the fluorescence of the ethenoadenosine phosphates directly, but rather to affect the conformation of the molecule, thereby affecting the quantum yield.

Wild growing mushrooms for the Edible City? Cadmium and lead content in edible mushrooms harvested within the urban agglomeration of Berlin, Germany

International Nuclear Information System (INIS)

Schlecht, Martin Thomas; Säumel, Ina

2015-01-01

Health effects by consuming urban garden products are discussed controversially due to high urban pollution loads. We sampled wild edible mushrooms of different habitats and commercial mushroom cultivars exposed to high traffic areas within Berlin, Germany. We determined the content of cadmium and lead in the fruiting bodies and analysed how the local setting shaped the concentration patterns. EU standards for cultivated mushrooms were exceeded by 86% of the wild mushroom samples for lead and by 54% for cadmium but not by mushroom cultures. We revealed significant differences in trace metal content depending on species, trophic status, habitat and local traffic burden. Higher overall traffic burden increased trace metal content in the biomass of wild mushrooms, whereas cultivated mushrooms exposed to inner city high traffic areas had significantly lower trace metal contents. Based on these we discuss the consequences for the consumption of mushrooms originating from urban areas. - Highlights: • Popular edible mushrooms display large variations in Cd and Pb content. • Low accumulating species are Sparassis crispa, Boletus luridus, or Boletus badius. • High accumulating species are Agaricus ssp., Russula vesca, or Calvatia gigantea. • Cd and Pb content in wild growing edible mushrooms were mostly above EU limits for cultivated mushrooms. • Cd and Pb content in commercial mushrooms cultures were regularly below EU limits for cultivated mushrooms. - Commercial mushroom cultures can be integrated into ‘Edible City’ approaches, but majority of wild growing mushroom samples highly accumulate trace metals

Radon exhalation and its dependence on moisture content from samples of soil and building materials

International Nuclear Information System (INIS)

Faheem, Munazza; Matiullah

2008-01-01

Indoor radon has long been recognized as a potential health hazard for mankind. Building materials are considered as one of the major sources of radon in the indoor environment. To study radon exhalation rate and its dependence on moisture content, samples of soil and some common types of building materials (sand, cement, bricks and marble) were collected from Gujranwala, Gujrat, Hafizabad, Sialkot, Mandibahauddin and Narowal districts of the Punjab province (Pakistan). After processing, samples of 200 g each were placed in plastic vessels. CR-39 based NRPB detector were placed at the top of these vessels and were then hermetically sealed. After exposing to radon for 30 days within the closed vessels, the CR-39 detectors were processed. Radon exhalation rate was found to vary from 122±19 to 681±10mBqm -2 h -1 with an average of 376±147mBqm -2 h -1 in the soil samples whereas an average of 212±34, 195±25, 231±30 and 292±35mBqm -2 h -1 was observed in bricks, sand, cement and marble samples, respectively. Dependence of exhalation on moisture content has also been studied. Radon exhalation rate was found to increase with an increase in moisture, reached its maximum value and then decreased with further increase in the water content

Evaluation of natural radioactivity and heavy metals content in Sudanese phosphate rocks used as low cost fertilizer

International Nuclear Information System (INIS)

Elkhangi, F.A.; Aamhed, M.M.O.; Abdalla, I.A.

1997-01-01

This study was carried out to determine the level of natural radioactivity and heavy metals content of Sudanese rock phosphate used as low cost fertilizer. Thirty samples collected from two types of local phosphate rocks from the Nuba mountains (Uro and Kurun) were used in this study and the activity concentrations of natural radioactivity determined using gamma spectroscopy were compared to those found in samples of imported phosphorous fertilizers Single Super phosphate (SSP) and Triple Super phosphate (TSP). The results showed that the ' Ra activity concentration was 0.6 - 0.8 Bq/g for Uro and 0.3 - 0.5 Bq/g for Kurun. As for the most commonly used imported fertilizer TSP, the result was found to be greater than that of Uro (around 1.0 Bq/g). The heavy metals content of Uro and Kurun rocks measured using X-ray Fluorescence Technique showed their levels were below the toxic levels reported by Christina (1991). It is evident that the environmental hazard is comparable in the local and imported fertilizers and is acceptable in both cases by international standards. The determine factor therefore in optioning for the use of a local or an imported brand should then be the fertilizing efficiency of the brand used against other economic consideration rather than the fertilizers environmental impact

Evaluation of mineral content and heavy metals of dromedary camel milk in Iran

Directory of Open Access Journals (Sweden)

Mahdieh MOSTAFIDI

Full Text Available Abstract The aim of this study was to determine the amount of major mineral compounds and heavy metals of camel milk in Iran. For this purpose camel milk samples were collected from seven regions of Iran include Qazvin, Golestan, Semnan, Sistan-Baluchestan, Khuzestan, Bushehr and Tehran. The samples were analyzed using Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES method. The results showed that among the mineral contents, iron and zinc of camel milk were greater than bovine milk. Based on the codex standard 193-2007 standards, the maximum acceptable limit for lead and cadmium is 20 µg/kg and 10 µg/kg, respectively. The results of this study showed that the measured amounts of lead, cadmium and nickel in all samples were less than the acceptable limit for bovine milk. Bovine milk and dairy products are a poor source of iron, while the obtained data revealed that camel milk is a major source of minerals, especially iron. The camel milk’s iron was 10 times more than bovine milk. However, variations in mineral content in camel milk could be due to feed, stage of lactation, milk collection time, drought conditions, environmental conditions and associated analytical methods. Camel milk recommended as a valuable source of food for the human.

Variations in atmospheric PM trace metal content in Spanish towns: Illustrating the chemical complexity of the inorganic urban aerosol cocktail

Science.gov (United States)

Moreno, Teresa; Querol, Xavier; Alastuey, Andrés; Viana, Mar; Salvador, Pedro; Sánchez de la Campa, Ana; Artiñano, Begoña; de la Rosa, Jesús; Gibbons, Wes

The majority of the Spanish urban population breathe air containing inhalable ambient airborne particles at average concentrations of 30-46 μg m -3 (PM 10) and 20-30 μg m -3 (PM 2.5). Even though the average weight of inhaled urban aerosol is commonly similar, however, there can be large chemical differences between the ambient dusts from different towns, including the more bioreactive elements such as some metals. In this context, we compare the source-apportioned trace metal content of airborne PM 10 and PM 2.5 collected daily over a 1-year period from six population centres in Spain: Barcelona, Alcobendas, Llodio, Huelva, Tarragona and Las Palmas de Gran Canaria. Total average trace metal (ΣTM) PM 10 and PM 2.5 contents vary by up to a factor of around 3, reaching a maximum of ΣTM 10 811 ng m -3 and ΣTM 2.5 503 ng m -3 at Llodio, an industrial but humid site with the lowest PM 10 mass levels but high contamination by Zn, Pb, Mn, Sn, Ni and Cr. In contrast, pollution at Huelva, although another industrially influenced site, instead emphasises Cu and As, whereas Barcelona, where traffic emissions and resuspension contribute to some of the highest average PM 10 levels in Spain, has unusually raised levels of Ti, V and Ba. Such variations in both daily and annual average PM bulk chemistry, particularly in potentially toxic trace metals concentrated in the finer aerosols (such as Cd, As, Pb, Hg and Ni), predict that PM health effects on resident populations from different towns are unlikely to be the same.

Effect of carbon and manganese on the microstructure and mechanical properties of 9Cr2WVTa deposited metals

Energy Technology Data Exchange (ETDEWEB)

Wang, Jian [Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Rong, Lijian [Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Li, Dianzhong [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Lu, Shanping, E-mail: shplu@imr.ac.cn [Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China); Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 110016, Shenyang (China)

2017-03-15

Six 9Cr2WVTa deposited metals with different carbon and manganese contents have been studied to reveal the role of major elements, which guide for the design of welding consumables for reduced activation ferritic/martensitic steel and meet for the requirements of accelerator driven systems-lead fusion reactors. The typical microstructure for the 9Cr2WVTa deposited metals is the lath martensite along with the fine stripe δ-ferrite. The chemical compositions influence the solidification sequence and therefore, change the δ-ferrite content in the deposited metal. The impact toughness for the 9Cr2WVTa deposited metals decreases remarkably when the δ-ferrite content is more than 5.2 vol%, also the impact toughness decreases owing to the high quenching martensite formation. Increasing the level of manganese addition, α phase of each alloy shifts to the bottom right according to the CCT diagram. - Highlights: • The typical deposited metals is the lath martensite with the fine stripe δ-ferrite. • The impact toughness is dependent on the δ-ferrite and the high quenching martensite. • The chemical compositions influence the solidification sequence.

Flood deposits and their heavy metal load - example of the Neckar river

International Nuclear Information System (INIS)

Hellmann, H.

1993-01-01

Flood deposits may develop from suspended solids under certain conditions, e.g. after the passage of a flood wave. Depending on the origin of the suspended material, the heavy metal load in these deposits varies considerably. Recent sediments deposited in the Neckar waterway after the flood of February/March 1990 are taken as an example to explain that it is necessary to consider the contamination load in relation to the grain size of the material. To this end, the heavy metal contents of the fine grain fraction (grain diameter [de

Using microbiological leaching method to remove heavy metals from sludge

Directory of Open Access Journals (Sweden)

Zhuyu Gu

2017-01-01

Full Text Available Microbial leaching is one of the most effective methods to remove heavy metals from sludge. In the conducted researches, the sludge samples were processed with Thiobacillus ferrooxidans and Thiobacillus thiooxidans obtained via cultivation, extraction and purification processes. Heavy metals such as Pb, Cd, Cu and Ni were leached from sludge by Thiobacillus ferrooxidans and Thiobacillus thiooxidans within different substrate concentration and pH value conditions. It is defined that from the point of view of economy and efficiency the optimal concentration of FeSO4.7H2O and sulfur for bio-leaching process was 0.2 g. The leaching rates of heavy metals such as Pb, Cd, Cu and Ni of the same concentration were 74.72%, 81.54%, 70.46% and 77.35% respectively. However, no significant differences depending on the pH value among the leaching rates were defined, even for the pH value of 1.5. Along with the removal of heavy metals from sludge, the organic matter, N, P, K were also leached to some extent. The losing rate of phosphorus was the highest and reached 38.44%. However, the content of organic matter, N, P, K in the processed sludge were higher in comparison with level I of the National Soil Quality Standards of China. Ecological risk of heavy metals in sludge before and after leaching was assessed by Index of Geo-accumulation (Igeo and comprehensive potential risk (RI. The results of research defined that the content of heavy metals in sludge meets the level of low ecological risk after leaching and their contents is lower in comparison with the National Agricultural Sludge Standard of China. Sludge leached by biological methods is possible to use for treatment for increasing soil fertility.

Crystallochemistry of rhenium compounds with metal-metal bonds

International Nuclear Information System (INIS)

Koz'min, P.A.; Surazhskaya, M.D.

1980-01-01

A review is presented including a brief description of atomic structure of 59 coordination rhenium compounds with metal-metal bond. The most important bond lengths and valent angles are presented for each compound. The dependence of rhenium-rhenium bond length on its multiplicity is discussed and possible causes of deviations from this dependence (namely, axial ligand presence, steric repulsion of ligands) are considered. On the basis of qualitative comparison of electronegativity of ligands in dimer compounds with quarternary bond of rhenium-rhenium a supposition is made on the influence of formal charge of atomic group and summary electro-negativity of ligands on the possibility of the metal-metal bond formation

ANALISIS KADAR LOGAM DAN CARA MUDAH MENGENALI UDANG YANG TERAKUMULASI LOGAM: STUDI KASUS TENTANG UDANG DI SUNGAI DONAN CILACAP, JAWA TENGAH (Metal Content Analysis and Easily Recognize for Shrimps that Accumulates of Metal: Case Study about Shrimps

Directory of Open Access Journals (Sweden)

Tumisem Tumisem

2011-07-01

Full Text Available ABSTRAK Penelitian tentang Analisis Kadar Logam dan Cara Mudah Mengenali Berbagai Udang yang Terakumulasi Logam dilakukan dengan: mengidentifikasi berbagai jenis udang, menganalisis kadar logam dan menganalisis secara morfologi berbagai jenis udang terkait dengan morfologi tubuhnya. Penelitian dilakukan di sepanjang Sungai Donan Cilacap dengan cara menangkap berbagai jenis udang di sepanjang sungai tersebut setiap musim. Analisis kadar logam dilakukan di Laboratorium Kimia Analitik UGM, identifikasi dan analisis morfologi udang dilakukan di Laboratorium Teknik Kimia UMP. Hasil identifikasi diperoleh enam jenis udang yaitu udang Tepus, Pletok, Jahe, Peci, Sikat, dan Wuku. Berdasarkan hasil analisis morfologi (warna tubuh menunjukkan semua jenis udang yang berasal dari lokasi sekitar tailing semen dan pertamina berwarna lebih gelap (kehitaman atau hitam kemerahan, dan yang berasal dari lokasi sungai yang memiliki tanaman bakau adalah cerah dan segar (warna lebih kelihatan bening. Hasil analisis kadar logam jenis Cd dan Pb pada semua udang tidak terdeteksi, sedangkan analisis kadar Cu terdeteksi pada udang Pletok, Wuku dan Sikat dengan kadar melebihi baku mutu kesehatan 0,1 ppm. Rata-rata kadar Cu pada udang tersebut sebesar 66,256 ppm per 1000 gram udang kering. Dari hasil analisis morfologi (bentuk tubuh dari semua jenis udang baik yang terakumulasi logam maupun tidak memiliki bentuk yang sama, sehingga tidak dapat menjadi patokan dalam mengenali udang yang tercemar logam. Berdasarkan penelitian di atas dapat disimpulkan udang yang terakumulasi bahan pencemar di atas standar keamanan pangan berwarna hijau kehitaman dan merah kehitaman, sedangkan udang yang tidak terakumulasi bahan pencemar berwarna putih segar. ABSTRACT Research on the metal content analysis and Easily Recognize for shrimps that accumulates of metal have done by identify various types of shrimps, metal content analysis, and analyzed morphologically various types of shrimp related

Migration of some metals in the ecosystem of the Caspian sea

Science.gov (United States)

Chaplygin, Wladimir A.; Tanasova, Anastasia S.; Ershova, Tatiana S.; Zaitsev, Vyacheslav F.; Bech, Jaume; Roca, Núria

2017-04-01

>Ni>Cd>Pb>Co>Hg. Decreasing the number of heavy metals content in steers as follows: Zn>Ni>Pb>Co>Cd>Hg, in the liver of Russian sturgeon: Zn>Ni>Pb>Cd>Co>Hg. It should be noted that in living objects Zn and Ni is accumulated to a greater extent in comparison with the other investigated metals. Apparently, this is due to their close contact with sediments, which have previously drawn attention N.V. Kuznetsova (2015) and N. Yu. Yevtushenko (1996). And mollusks, have the most intimate contact with the soil, have accumulated zinc and Nickel at higher concentrations (79.73 ± 2.18 mg/kg and 59.97 ± of 9.29 mg/kg, respectively), compared with fishs. In living organisms revealed the migration of mercury through trophic levels. If the concentration of mercury in sandy soil to make per unit, it is possible to obtain the following ratios: sand soil ×1 fish significant coefficients of bioaccumulation was noted in only a handful of metals: gobies (Hg - 2), Russian sturgeon (Cd - 2.5 and Hg - 7). Thus, the bioaccumulation potential of metals depends on species physiological characteristics of the organisms and environmental factors.

Work function of elemental metals and its face dependence ...

African Journals Online (AJOL)

The calculated work functions for the flat surface of the metals were in perfect agreement with experimental values for metals in the low-density limit and the agreement with experimental values decreased towards the high-density limit. The calculated work functions for the body centred cubic metals were in good agreement ...

TVA - Thermionic Vacuum Arc - A new type of discharge generating pure metal vapor plasma

International Nuclear Information System (INIS)

Musa, G.; Popescu, A.; Mustata, I.; Borcoman, I.; Cretu, M.; Leu, G.F.; Salambas, A.; Ehrich, H.; Schumann, I.

1996-01-01

In this paper it is presented a new type of discharge in vacuum conditions generating pure metal vapor plasma with energetic metal ions content. The peculiarities of this heated cathode discharge are described and the dependence of the measured ion energy of the working parameters are established. The ion energy value can be easily and smoothly changed. A nearly linear dependence between energy of ions and arc voltage drop has been observed. The ion energy can be increased by the increase of the interelectrode distance, decrease of cathode temperature, change of the relative position of the electrodes and by the decrease of the arc discharge current. A special configuration with cylindrical geometry has been used to develop a small size and compact metal vapour plasma gun. Due to the mentioned peculiarities, this discharge offers new openings for important applications. (author)

Recovery of uranium and accompanying metals from various types of industrial wastes

International Nuclear Information System (INIS)

Chajduk, E.; Danko, B.; Gajda, D.; Zakrzewska, G.; Harasimowicz, M.; Bieluszka, P.

2014-01-01

On January 28"t"h 2014 the Program of Polish Nuclear Energy was signed by Polish Government. According to this program Poland has to secure a constant supply of uranium for Polish NPPs in the future. Uranium in Poland occurs in Vistula Spit area in sandstone rocks and Podlasie Depression area in black dictyonema shales, which are low grade ores. Scarce uranium resources stimulate interest in its recovery from secondary resources as potential raw materials. Industrial wastes and by-products were considered as a source of uranium in this studies. Apart from uranium other valuable metals (e.g. vanadium, molybdenum or lanthanides) were recovered to improve the economy of the process. Three types of industrial wastes were examined: flotation tailings from the copper industry, phosphoric acid from the fertilizer industry and fracturing fluid from shale gas exploitation. Metals from flotation tailings were separated in two steps: 1) acidic leaching of the flotation waste using sulfuric acid solution and 2) separation of metals by ion-exchange chromatography. All the liquid samples were analyzed by ICP-MS method to determine the separation efficiency of the process. Uranium was recovered from phosphoric acid by high-pressure membrane filtration or by extraction/stripping integrated processes applying membrane modules Liquid-Cel® Extra-Flow (Celgard). Aqueous solutions after hydraulic fracturing are very diverse in terms of chemical composition, depending on borehole and fracturing technology applied. The content of various substances in backflow fluid depends on mechanical behavior and chemical composition of shale. Organic matter content in this type of waste did not exceed 1% usually, but the salinity is high. Initially, organic pollutants were removed and next the fluid was purified by combined various ion-exchangers. Individual metals were selectively eluted from ion-exchanger by combination of different eluents. The content of metals in samples was analyzed by ICP

Heavy metals in fish tissues/stomach contents in four marine wild commercially valuable fish species from the western continental shelf of South China Sea.

Science.gov (United States)

Gu, Yang-Guang; Lin, Qin; Huang, Hong-Hui; Wang, Liang-Gen; Ning, Jia-Jia; Du, Fei-Yan

2017-01-30

The concentrations of heavy metals (Cd, Pb, Cr, Ni, Cu and Zn) were determined in four commercially valuable fish species (Thunnus obesus, Decapterus lajang, Cubiceps squamiceps and Priacanthus macracanthus), collected in the western continental shelf of the South China Sea. Concentrations of Cd, Pb, Cr, Ni, Cu, and Zn in fish muscles were 0.006-0.050, 0.13-0.68, 0.18-0.85, 0.11-0.25, 0.12-0.77, and 2.41-4.73μg/g, wet weight, respectively. Concentrations of heavy metals in all species were below their acceptable daily upper limit, suggesting human consumption of these wild fish species may be safe, with health risk assessment based on the target hazard quotients (THQ) and total THQ, indicating no significant adverse health effects with consumption. The average concentrations of Zn were higher in gills than in stomach contents, backbones or muscle, while conversely, the other heavy metals had higher concentrations in stomach contents than in other tissues. Copyright © 2016 Elsevier Ltd. All rights reserved.

Water quality in the Tibetan Plateau: Metal contents of four selected rivers

International Nuclear Information System (INIS)

Huang Xiang; Sillanpaeae, Mika; Duo Bu; Gjessing, Egil T.

2008-01-01

The water used by 85% of the Asian population originates in Tibetan Plateau. During April and May of 2006, water samples were collected from four major Asian rivers in the Plateau (i.e. the Salween, Mekong, Yangtze River and Yarlung Tsangpo) and analyzed for Cu, Pb, Zn, Ag, Mo, Cd, Co, Cr, Ni, Li, Mn, Al, Fe, Mg and Hg. The results showed that elements such as Mg were rather high in Tibetan rivers, giving a mean electrical conductance of 36 mS/m. In a few locations, the results also showed relatively high concentrations of Al and Fe (>1 mg/L). However, the concentrations of Cu, Zn, Ag, Cd, and Cr were generally low. Contamination with Pb was identified at a few locations in the Salween and Ni at a few sites in the Yangtze River. - For the first time, total dissolved metal contents in source water of four major Asian rivers were evaluated at the same time

Temperature dependence of contact resistance at metal/MWNT interface

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang-Eui; Moon, Kyoung-Seok; Sohn, Yoonchul, E-mail: yoonchul.son@samsung.com [Materials Research Center, Samsung Advanced Institute of Technology, Samsung Electronics, Suwon 443-803 (Korea, Republic of)

2016-07-11

Although contact resistance of carbon nanotube (CNT) is one of the most important factors for practical application of electronic devices, a study regarding temperature dependence on contact resistance of CNTs with metal electrodes has not been found. Here, we report an investigation of contact resistance at multiwalled nanotube (MWNT)/Ag interface as a function of temperature, using MWNT/polydimethylsiloxane (PDMS) composite. Electrical resistance of MWNT/PDMS composite revealed negative temperature coefficient (NTC). Excluding the contact resistance with Ag electrode, the NTC effect became less pronounced, showing lower intrinsic resistivity with the activation energy of 0.019 eV. Activation energy of the contact resistance of MWNT/Ag interface was determined to be 0.04 eV, two times larger than that of MWNT-MWNT network. The increase in the thermal fluctuation assisted electron tunneling is attributed to conductivity enhancement at both MWNT/MWNT and MWNT/Ag interfaces with increasing temperature.

Anomalous Temperature Dependence in Metal-Black Phosphorus Contact.

Science.gov (United States)

Li, Xuefei; Grassi, Roberto; Li, Sichao; Li, Tiaoyang; Xiong, Xiong; Low, Tony; Wu, Yanqing

2018-01-10

Metal-semiconductor contact has been the performance limiting problem for electronic devices and also dictates the scaling potential for future generation devices based on novel channel materials. Two-dimensional semiconductors beyond graphene, particularly few layer black phosphorus, have attracted much attention due to their exceptional electronic properties such as anisotropy and high mobility. However, due to its ultrathin body nature, few layer black phosphorus-metal contact behaves differently than conventional Schottky barrier (SB) junctions, and the mechanisms of its carrier transport across such a barrier remain elusive. In this work, we examine the transport characteristic of metal-black phosphorus contact under varying temperature. We elucidated the origin of apparent negative SB heights extracted from classical thermionic emission model and also the phenomenon of metal-insulator transition observed in the current-temperature transistor characteristic. In essence, we found that the SB height can be modulated by the back-gate voltage, which beyond a certain critical point becomes so low that the injected carrier can no longer be described by the conventional thermionic emission theory. The transition from transport dominated by a Maxwell-Boltzmann distribution for the high energy tail states, to that of a Fermi distribution by low energy Fermi sea electrons, is the physical origin of the observed metal-insulator transition. We identified two distinctive tunneling limited transport regimes in the contact: vertical and longitudinal tunneling.

Heavy Metal Content of Some Jordanian and American Cigarettes

International Nuclear Information System (INIS)

Jaradat, Q.; Momani, K.; Mutair, A.

2003-01-01

Flame and graphite furnace atomic absorption spectroscopy were employed to determine Cd, Pb, Cu, Zn and Fe in tobacco, wrapping paper, filter, smoke, and ash of some Jordanian and American cigarettes before and after smoking. The results of this study indicated that different constituents of cigarettes contain different concentrations of heavy metals in the different cigarette brands. Before smoking, most of the metals are found in the tobacco, whilst after smoking most of the metals remain in ash and only small amounts are with the smoke. The cigarette filters were capable of retaining some of the metals such as Cd, Pb, and Cu. The concentration of any analyte, in the constituent parts of a cigarette, varied from one brand to another, but among the different cigarette brands selected for this study, there is no specific brand that could be said to contain all the analytes at the highest or lowest concentration. The cigarette brands in this study contain relatively high average concentrations of Cd and Pb, but they are within the concentration range of foreign cigarettes that have been reported from various areas in the world . ( Author's) 21 refs., 12 tabs

Spin-dependent hot electron transport and nano-scale magnetic imaging of metal/Si structures

International Nuclear Information System (INIS)

Kaidatzis, A.

2008-10-01

In this work, we experimentally study spin-dependent hot electron transport through metallic multilayers (ML), containing single magnetic layers or 'spin-valve' (SV) tri layers. For this purpose, we have set up a ballistic electron emission microscope (BEEM), a three terminal extension of scanning tunnelling microscopy on metal/semiconductor structures. The implementation of the BEEM requirements into the sample fabrication is described in detail. Using BEEM, the hot electron transmission through the ML's was systematically measured in the energy range 1-2 eV above the Fermi level. By varying the magnetic layer thickness, the spin-dependent hot electron attenuation lengths were deduced. For the materials studied (Co and NiFe), they were compared to calculations and other determinations in the literature. For sub-monolayer thickness, a non uniform morphology was observed, with large transmission variations over sub-nano-metric distances. This effect is not yet fully understood. In the imaging mode, the magnetic configurations of SV's were studied under field, focusing on 360 degrees domain walls in Co layers. The effects of the applied field intensity and direction on the DW structure were studied. The results were compared quantitatively to micro-magnetic calculations, with an excellent agreement. From this, it can be shown that the BEEM magnetic resolution is better than 50 nm. (author)

Investigation of heavy metals content in medicinal plant, eclipta alba L

International Nuclear Information System (INIS)

Hussain, I.; Khan, H.

2010-01-01

Heavy metal such as Cr, Fe, Zn, Mn, Ni, Pb, Cu and Cd were investigated in a= medicinally important plant, Eclipta alba L. as well as in the soil it was grown using atomic absorption spectrophotometer. The plant samples were collected from their natural habitat at three different locations of Peshawar Pakistan. The whole plant materials (roots, stems and leaves) were found to contain all heavy metals except Cd, which corresponds to their concentration in the soil it was grown. Among all the heavy metals, Fe was found to be at the highest level (8.95 to 27.7 mg/kg) followed by Mn (0.44 to 14.0 mg/kg) and Zn (1.04 to 4.50 mg/kg), while the rest of metals were at low concentration. The present study showed that E. alba L. is suitable for the control of environmental pollutants such as heavy metals, however, for medicinal purposes; it should be collected from those areas which are not contaminated with heavy metals. The purpose of the current study was to standardize various indigenous medicinal plants for heavy metals contamination and to make awareness among the public regarding its safer use and collection areas, containing high level of heavy metals and their adverse health affects. (author)

Further investigation of the heavy metal content of the teeth of the bank vole as an exposure indicator of Environmental Pollution (1987)(1987)in Poland

Energy Technology Data Exchange (ETDEWEB)

Gdula-Argasinska, Joanna; Appleton, John; Sawicka-Kapusta, Katarzyna; Spence, Bill

2004-09-01

The content of heavy metals in mineralised dental tissues is an indicator of the exposure of their mineral phase to heavy metals during the time of tooth development and dental tissue formation. Therefore, teeth have been used as bio-indicators which accurately reflect the environmental or dietary exposure of animals and humans to heavy metals. This study follows from the earlier work in which it was demonstrated that the teeth from bank voles inhabiting various environmentally polluted and non-polluted forests in Southern Poland were reliable indicators of exposure to heavy metals. Using analytical techniques employed in the earlier study heavy metal concentrations were obtained in the teeth of bank voles trapped in 1998-2000 to determine if efforts to clean up the environment could be detected in changes in heavy metal concentrations in the teeth. The results show that these efforts are reflected in lower concentrations of heavy metals in the teeth but that cross border contamination remains a problem.

Heavy metal bioaccumulation in the organisms at hydrothermal fields of the Mid-Atlantic Ridge and East-Pacific Rise

International Nuclear Information System (INIS)

Demina, L.L.; Galkin, S.V.

2008-01-01

The influence of geochemical environment as well as biological parameters on the heavy metal bioaccumulation in the hydrothermal fauna at certain fields of the Mid-Atlantic ridge (MAR) and East Pacific Rise (EPR) are studied. The highest concentration of Fe, Zn, Cu, Mn, Ni, Cr, Co, Pb, Cd, Ag, Se, Sb, As, and Hg were detected in the tubes of the most thermophilic organism Alvinella caudata inhabited sulfide chimneys at 9 0 50 ' N EPR, i.e. at place where the influence of hydrothermal fluids was the maximal. Elevated heavy metals levels were typical for organs associated with the endo symbiotic bacteria activity, such as gills of specialized mussels Bathymodiolus, clams Archivestica gigas (Calyptogena magnifica), trophosome of vestimentifera Riftia, maxillipeds of shrimps Rimicaris exoculata. Inter-site (Broken Spur vs. Rainbow) comparison of the partitioning of metals within soft tissues has revealed that metal concentrations in the fauna habitats is an important albeit not the single factor that controls the metal content in the interior organs of the taxa. The external parts of mussels, such as shells, demonstrate patterns of bioaccumulation reflecting the metal concentrations in the micro-habitats. In spite of the minimal metal content was found in the mussel shells, they serve as a great reservoirs for heavy metal deposition and storage at the hydrothermal regions. For some elements a trend of heavy metal transferring through the food chains was revealed. There were no clear dependence between age of mussels and metal content (except Hg) in the soft tissues

The Influence of the Addition of Polyacrylic Hydrogel on the Content of Proteins, Minerals and Trace Elements in Milk Protein Solutions

Directory of Open Access Journals (Sweden)

Aleksandar Ž. Kostić

2014-01-01

Full Text Available Solutions of milk protein concentrate, whey protein concentrate and bovine serum albumin (BSA were treated with polyacrylic hydrogel to establish whether the hydrogel could be used for decontamination of heavy metal ions from milk protein-based products. The obtained results indicated that swelling of hydrogel in these solutions had different effects on their mineral, trace element and total protein content. Total protein and phosphorus content increased in milk protein concentrate and whey protein concentrate solutions after swelling of hydrogel without changes in their protein compositions. On the other hand, the protein content in BSA solution decreased after swelling. The content of Na did not change in milk protein concentrate solution, whereas it significantly increased in whey protein concentrate solution after hydrogel swelling. The content of Ca and Mg was reduced after the swelling in milk protein concentrate and whey protein concentrate solutions for 20.3–63.4 %, depending on the analysed sample and the mineral. The content of Zn did not change during swelling, whereas the content of Fe, Cu, Mn, Ni and Pb significantly decreased after hydrogel swelling in all analysed samples. According to the obtained results, the addition of polyacrylic hydrogel to milk and whey protein concentrate solutions can significantly decrease the content of heavy metal ions without affecting their protein composition. Therefore, this work could be useful in developing a new technological process for heavy metal purification of milk protein-based products.

Ceramic/Metal Composites with Positive Temperature Dependence of Thermal Conductivity

International Nuclear Information System (INIS)

Li Jianhui; Yu Qi; Sun Wei; Zhang Rui; Wang Ke; Li Jingfeng; Ichigozaki, Daisuke

2013-01-01

Most materials show decreasing thermal conductivity with increasing temperature, but an opposite temperature dependence of thermal conductivity is required for some industrial applications. The present work was conducted with a motivation to develop composite materials with a positive temperature dependence of thermal conductivity. ZrO 2 / stainless steel powders (304L) composite, with 3% stearic acid, was prepared by normal sintering under the protecting of Ar after mixing by mechanical ball milling technique. With the 304L content increasing from 10% to 20%, the thermal conductivity values increased. For all samples, the thermal conductivity in the temperature range of room temperature to 700 °C decreased with temperature below 300 °C, and then began to increase. The increasing thermal conductivity of the composites (within the high temperature range was attributed to the difference of the thermal conductivity and thermal expansion coefficient between ZrO 2 ceramic and 304L stainless steel powders. Two simple models were also used to estimate the thermal conductivity of the composites, which were in good agreement with the experiment results.

A numerical study of spin-dependent organization of alkali-metal atomic clusters using density-functional method

International Nuclear Information System (INIS)

Liu Xuan; Ito, Haruhiko; Torikai, Eiko

2012-01-01

We calculate the different geometric isomers of spin clusters composed of a small number of alkali-metal atoms using the UB3LYP density-functional method. The electron density distribution of clusters changes according to the value of total spin. Steric structures as well as planar structures arise when the number of atoms increases. The lowest spin state is the most stable and Li n , Na n , K n , Rb n , and Cs n with n = 2–8 can be formed in higher spin states. In the highest spin state, the preparation of clusters depends on the kind and the number of constituent atoms. The interaction energy between alkali-metal atoms and rare-gas atoms is smaller than the binding energy of spin clusters. Consequently, it is possible to self-organize the alkali-metal-atom clusters on a non-wetting substrate coated with rare-gas atoms.

A numerical study of spin-dependent organization of alkali-metal atomic clusters using density-functional method

Energy Technology Data Exchange (ETDEWEB)

Liu Xuan, E-mail: liu.x.ad@m.titech.ac.jp; Ito, Haruhiko [Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology (Japan); Torikai, Eiko [Interdisciplinary Graduate School of Medicine and Engineering, University of Yamanashi (Japan)

2012-08-15

We calculate the different geometric isomers of spin clusters composed of a small number of alkali-metal atoms using the UB3LYP density-functional method. The electron density distribution of clusters changes according to the value of total spin. Steric structures as well as planar structures arise when the number of atoms increases. The lowest spin state is the most stable and Li{sub n}, Na{sub n}, K{sub n}, Rb{sub n}, and Cs{sub n} with n = 2-8 can be formed in higher spin states. In the highest spin state, the preparation of clusters depends on the kind and the number of constituent atoms. The interaction energy between alkali-metal atoms and rare-gas atoms is smaller than the binding energy of spin clusters. Consequently, it is possible to self-organize the alkali-metal-atom clusters on a non-wetting substrate coated with rare-gas atoms.

Orchards for edible cities: cadmium and lead content in nuts, berries, pome and stone fruits harvested within the inner city neighbourhoods in Berlin, Germany.

Science.gov (United States)

von Hoffen, Laura Pauline; Säumel, Ina

2014-03-01

Today's urban gardening focuses mainly on vegetable production and rarely includes fruit trees. Health effects of consuming urban crops are questioned due to high local pollution loads. Here, we determined cadmium and lead content in the edible parts of nuts, berries, pome, and stone fruits harvested from fruit trees and shrubs within inner city neighbourhoods of Berlin, Germany. We analysed how local settings at sampling sites shaped the trace metal content. We revealed significant differences in trace metal content depending on species, fruit type, local traffic, and parameters related to barriers between the sampling site and neighbouring roads. Higher overall traffic burden and proximity to roads increased whereas buildings or vegetation as barriers reduced trace metal content in the edible biomass. We demonstrate, that the consumption of non-vegetable fruits growing in inner city sites in Berlin does not pose a risk on human health as long as the fruits are thoroughly washed and it is provided that site pollutions and impacts are considered in garden concepts and guidelines. © 2013 Published by Elsevier Inc.

Correlation between heavy metal contents and antioxidant activities in medicinal plants grown in copper mining areas

International Nuclear Information System (INIS)

Maharia, R.S.; Dutta, R.K.; Acharya, R.; Reddy, A.V.R.

2012-01-01

Three commonly used medicinal plants, e.g., Adhatoda vasica, Cassia fistula, and Withania somnifera grown in two contrasting environmental conditions, namely from copper mining site and from control site corresponding to soil not contaminated with Cu, to understand correlations between high Cu bioaccumulation in medicinal plants on their antioxidant activities. Concentrations of some essential metals, e.g., Cr, Mn, Fe, Cu, Zn, and Se in the leaves of these plants were measured by instrumental neutron activation analysis. The Cu levels in the samples from mining site were in the range of 32.6 to 57.2 mg/kg, which were 5-7 folds higher than the control samples, while Cr levels were about 2-folds higher in the mining site. Speciation studies of Cr revealed negligible content of toxic hexavalent Cr. Antioxidant assay of these plants from both the sampling sites, measured as total phenolic content, total flavonoid content, 2,2'-diphenyl-1-picrylhydrazyl, free radical scavenging ability, and chelating ability with ferrous ions exhibited maximum activity for A. vasica, while that of W. somnifera was minimum. However, the variations in the antioxidant activities for each medicinal plant species from mining site and control site did not reveal significant differences. (author)

Metal-Containing Polystyrene Beads as Standards for Mass Cytometry.

Science.gov (United States)

Abdelrahman, Ahmed I; Ornatsky, Olga; Bandura, Dmitry; Baranov, Vladimir; Kinach, Robert; Dai, Sheng; Thickett, Stuart C; Tanner, Scott; Winnik, Mitchell A

2010-01-01

We examine the suitability of metal-containing polystyrene beads for the calibration of a mass cytometer instrument, a single particle analyser based on an inductively coupled plasma ion source and a time of flight mass spectrometer. These metal-containing beads are also verified for their use as internal standards for this instrument. These beads were synthesized by multiple-stage dispersion polymerization with acrylic acid as a comonomer. Acrylic acid acts as a ligand to anchor the metal ions within the interior of the beads. Mass cytometry enabled the bead-by-bead measurement of the metal-content and determination of the metal-content distribution. Beads synthesized by dispersion polymerization that involved three stages were shown to have narrower bead-to-bead variation in their lanthanide content than beads synthesized by 2-stage dispersion polymerization. The beads exhibited insignificant release of their lanthanide content to aqueous solutions of different pHs over a period of six months. When mixed with KG1a or U937 cell lines, metal-containing polymer beads were shown not to affect the mass cytometry response to the metal content of element-tagged antibodies specifically attached to these cells.

Effect of increasing helium content and disk dwarfs evolution on the chemical enrichment of the galaxy

Energy Technology Data Exchange (ETDEWEB)

Caimmi, R [Padua Univ. (Italy). Ist. di Astronomia

1979-07-01

The author deals with two main effects: First the empirical metal abundance distribution in Main Sequence disk dwarfs of the solar neighbourhood, and second, the theoretical possibility of (i) an increased helium content as the Galaxy evolves, and (ii) the presence of evolutionary effects in disk dwarfs (i.e., the age of some or all stars considered up to the subgiant phase is not necessarily longer than the age of the galactic disk). Account is taken of a linear increase of helium content with metal content, and some constraints are imposed relative to initial, solar and present-day observed values of Y and Z, and to observed relative helium to heavy element enrichment, ..delta..Y/..delta..Z. In this way, little influence is found on the empirical metal abundance distribution in the range 0<=..delta..Y/..delta..Z<=3, while larger values of ..delta..Y/..delta..Zwould lead to a more significant influence. 'Evolved' and 'unevolved' theoretical metal abundance distributions are derived by accounting for a two-phase model of chemical evolution of galaxies and for a linear mass dependence of star lifetimes in the spectral range G2V-G8V and are compared with the empirical distribution. All are in satisfactory agreement due to systematic shift data by different observations; several values of collapse time Tsub(c) and age of the Galaxy T are also considered. Finally, models of chemical evolution invoking homogeneous collapse without infall and inhomogeneous collapse with infall, are briefly discussed relative to the empirical metal abundance distribution in Main Sequence disk dwarfs of the solar neighbourhood.

Verbascum bombyciferum Boiss. (Scrophulariaceae) as possible bio-indicator for the assessment of heavy metals in the environment of Bursa, Turkey.

Science.gov (United States)

Arslan, Hülya; Güleryüz, Gürcan; Leblebici, Zeliha; Kirmizi, Serap; Aksoy, Ahmet

2010-04-01

In this study, we determined the heavy metal content (Cd(2+), Cr(3+), Cu(2+), Fe(3+), Ni(2+), Pb(2+), and Zn(2+)) in the soil surrounding the roots and different organs of Verbascum bombyciferum Boiss. (Scrophulariaceae), which is endemic to Uludağ Mountain, Bursa, Turkey. Plant samples were collected from roadsides, and heavy metal accumulation capabilities were tested. This is one of the pioneer species of ruderal plant communities on roadsides, building sites, rubbish dumps, etc. Different organs of plant samples (roots, stems, leaves, and flowers) and their soils were analyzed by inductively couple plasma optical emission spectroscopy for their heavy metal contents. Some of the analyzed heavy metals (Cd(2+), Cr(3+), Pb(2+), and Zn(2+)) were usually increased depending on the traffic in the sample sites, and this variation was also reflected in heavy metal content of plant samples. Our results show that this plant can be used as a bio-indicator species in the monitoring of increased Cd(2+), Cr(3+), Pb(2+), and Zn(2+) in the environment. We also concluded that V. bombyciferum have the capability of Cd(2+), Cr(3+), Cu(2+), Ni(2+), Pb(2+), and Zn(2+) accumulation.

classification of plants according to their heavy metal content around

African Journals Online (AJOL)

Mgina

accumulated heavy metals around North Mara Gold Mine were not known. To study such ... heavy metal hyperaccumulator plants for possible future remediation of the study area. ... mine is about 100 kilometers east of Lake. Victoria and 20 ...

Responses of the alga Pseudokirchneriella subcapitata to long-term exposure to metal stress

Energy Technology Data Exchange (ETDEWEB)

Machado, Manuela D. [Bioengineering Laboratory, Chemical Engineering Department, ISEP-School of Engineering of Polytechnic Institute of Porto, Porto (Portugal); CEB-Centre of Biological Engineering, University of Minho, Braga (Portugal); Lopes, Ana R. [LEPABE, Laboratory for Process Engineering, Environment, Biotechnology and Energy, Faculty of Engineering, University of Porto, Porto (Portugal); Soares, Eduardo V., E-mail: evs@isep.ipp.pt [Bioengineering Laboratory, Chemical Engineering Department, ISEP-School of Engineering of Polytechnic Institute of Porto, Porto (Portugal); CEB-Centre of Biological Engineering, University of Minho, Braga (Portugal)

2015-10-15

Highlights: • Heavy metals provoke a perturbation of the physiological status of Pseudokirchneriella subcapitata. • Cd(II), Cr(VI) and Cu(II), at high concentrations, cause the loss of membrane integrity. • Cd(II), Cr(VI), Cu(II) and Zn(II) inhibit esterase activity in a dose dependent manner. • Heavy metals affect mitochondrial function and photosynthetic activity. • Fluorescent probes are a useful tool in the identification of toxicity targets of the heavy metals. - Abstract: The green alga Pseudokirchneriella subcapitata has been widely used in ecological risk assessment, usually based on the impact of the toxicants in the alga growth. However, the physiological causes that lead algal growth inhibition are not completely understood. This work aimed to evaluate the biochemical and structural modifications in P. subcapitata after exposure, for 72 h, to three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II), corresponding approximately to 72 h-EC{sub 10} and 72 h-EC{sub 50} values and a high concentration (above 72 h-EC{sub 90} values). The incubation of algal cells with the highest concentration of Cd(II), Cr(VI) or Cu(II) resulted in a loss of membrane integrity of ~16, 38 and 55%, respectively. For all metals tested, an inhibition of esterase activity, in a dose-dependent manner, was observed. Reduction of chlorophyll a content, decrease of maximum quantum yield of photosystem II and modification of mitochondrial membrane potential was also verified. In conclusion, the exposure of P. subcapitata to metals resulted in a perturbation of the cell physiological status. Principal component analysis revealed that the impairment of esterase activity combined with the reduction of chlorophyll a content were related with the inhibition of growth caused by a prolonged exposure to the heavy metals.

Responses of the alga Pseudokirchneriella subcapitata to long-term exposure to metal stress

International Nuclear Information System (INIS)

Machado, Manuela D.; Lopes, Ana R.; Soares, Eduardo V.

2015-01-01

Highlights: • Heavy metals provoke a perturbation of the physiological status of Pseudokirchneriella subcapitata. • Cd(II), Cr(VI) and Cu(II), at high concentrations, cause the loss of membrane integrity. • Cd(II), Cr(VI), Cu(II) and Zn(II) inhibit esterase activity in a dose dependent manner. • Heavy metals affect mitochondrial function and photosynthetic activity. • Fluorescent probes are a useful tool in the identification of toxicity targets of the heavy metals. - Abstract: The green alga Pseudokirchneriella subcapitata has been widely used in ecological risk assessment, usually based on the impact of the toxicants in the alga growth. However, the physiological causes that lead algal growth inhibition are not completely understood. This work aimed to evaluate the biochemical and structural modifications in P. subcapitata after exposure, for 72 h, to three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II), corresponding approximately to 72 h-EC 10 and 72 h-EC 50 values and a high concentration (above 72 h-EC 90 values). The incubation of algal cells with the highest concentration of Cd(II), Cr(VI) or Cu(II) resulted in a loss of membrane integrity of ~16, 38 and 55%, respectively. For all metals tested, an inhibition of esterase activity, in a dose-dependent manner, was observed. Reduction of chlorophyll a content, decrease of maximum quantum yield of photosystem II and modification of mitochondrial membrane potential was also verified. In conclusion, the exposure of P. subcapitata to metals resulted in a perturbation of the cell physiological status. Principal component analysis revealed that the impairment of esterase activity combined with the reduction of chlorophyll a content were related with the inhibition of growth caused by a prolonged exposure to the heavy metals

Heavy metal content in the meat of common carp (Cyprinuscarpio L.and rainbow trout (Oncorhynchus mykiss W., cultivated under different technologies

Directory of Open Access Journals (Sweden)

St. Stoyanova

2016-03-01

Full Text Available Abstract. Water pollution from industrial production and developing agriculture is a serious problem in aquaculture. The aim of this study was to determine the content of heavy metals Zn (zink, Pb(lead, Ni (nickel and Cd (cadmium in the muscles of common carp (Cyprinus carpio L. and rainbow trout (Oncorhynchus mykiss W., grown under different technologies. In the current study were investigated common carp (Cyprinus carpio and rainbow trout (Oncorhynchus mykiss, cultivated in net cages, earthen ponds and raceways. The concentration of heavy metals in the muscles of fish was determined by the methods of AAS in the Scientific laboratory of the Faculty of Agriculture. The influence of different production technologies on the bioaccumulation of Zn, Pb, Ni and Cd (in the flesh of common carp and rainbow trout was found. The Ni content in muscles was 31.25% higher in common carp, cultured at earthen ponds, compared with its content in the flesh of the fish raised in net cages. The concentration of Pd and Ni in rainbow trout, raised in raceways was higher than that determinated for rainbow trout cultivated in net cages, by 25.0% and 7.14%, respectively. The concentration of Cd and Zn of these species, grown in raceways were lower by 33.33% and 2.14%, respectively, compared with their concentration in rainbow trout, cultivated in net cages.

Heavy metals in garden soils along roads in Szeged, Hungary

Science.gov (United States)

Szolnoki, Zsuzsanna; Farsang, Andrea

2010-05-01

The soils of the urban environment, owing to the various anthropogenic activities, can be contaminated by heavy metals. The traffic is well-known for more decades to be main source of heavy metals mostly in cities. The accumulation of these elements can have different effects, either directly endangering the natural soil functions, or indirectly endangering the biosphere by bio-accumulation and inclusion in the food chain. The hobby gardens and the vegetable gardens directly along roads can be potential risky for people since unknown amount of heavy metals can be accumulated into organization of local residents due to consumption of vegetables and fruits grown in their own garden. The aim of this study was to determine the heavy metal content of garden soils directly along roads with heavy traffic in order to assess possible risk for human health. The total content and the mobile content of Cd, Co, Cr, Cu, Ni, Pb and Zn have been determined in samples from garden soils along 5 busy roads of Szeged, South Hungary. Enrichment factor has been calculated with the help of control soil samples far from roads. The soil properties basically influencing on metal mobility have also been examined. Finally, the human health risk of these garden soils has been modelled by determination of health risk quotient (HRQ). As a result of our investigations, it can be claimed that mostly Cu, Zn and to a lesser degree the Ni, Cr and Pb accumulated in garden soils along roads depending on the traffic density. In general, the topsoils (0-10 cm) had higher amount of these metals rather than the subsoils (40-50 cm). Ni of these metals has approached; Cu has exceeded limit value while Pb is under it. Cd is very high in both soils along roads and control ones far from roads. Garden soils along the roads have such basic soil parameters (pH, mechanical soil type, humus content) that prove fairly high metal-binding capacity for these soils. Total risk of usage of these gardens (ingestion of soil

Gestational age dependent content, composition and intrauterine accretion rates of fatty acids in fetal white adipose tissue

NARCIS (Netherlands)

Kuipers, Remko S.; Luxwolda, Martine F.; Offringa, Pieter J.; Martini, Ingrid A.; Boersma, E. Rudy; Dijck-Brouwer, D. A. Janneke; Muskiet, Frits A. J.

2012-01-01

Background: Little is known about the gestational age (GA) dependent content, composition and intrauterine accretion rates of fatty acids (FA) in fetal white adipose tissue (WAT). Objective & design: To acquire this information, we collected abdominal subcutaneous WAT samples from 40 preterm and

Time-temperature dependent variations in beta-carotene contents in carrot using different spectrophotometric techniques

Science.gov (United States)

Ullah, Rahat; Khan, Saranjam; Shah, Attaullah; Ali, Hina; Bilal, Muhammad

2018-05-01

The current study presents time dependent variations in the concentration of beta-carotene in carrot under different storage-temperature conditions using UV–VIS and Raman spectrophotometric techniques. The UV–VIS absorption spectra of beta-carotene extracted from carrot shows three distinct absorption peaks at 442, 467, and 500 nm with maximum absorption at 467 nm. These absorption peaks are very much reproducible and are assigned to β-carotene. Similarly, Raman spectra of carrot samples also confirmed the three main Raman peaks of beta-carotene at shift positions 1003, 1150, and 1515 cm‑1. An overall decrease in beta-carotene content has been observed for time-temperature conditions. These results depict a decrease of about 40% in the content of beta-carotene when carrot samples were stored in a refrigerator (4 °C) for the first 20 d, whereas a decrease of about 25% was observed when carrot samples were stored in a freezer (‑16 °C) for the same period. The objective of this study is to investigate the possible use of Raman spectroscopy and UV–VIS spectroscopy for quick and detailed analysis of changes (degradation) in beta-carotene content associated with time and temperature in storage (frozen foods) in order to promote quality foods for consumers. Future study with a greater focus on the concentration/content of beta-carotene in other fruits/vegetables is also desirable.

Gamma-ray yield dependence on bulk density and moisture content of a sample of a PGNAA setup. A Monte Carlo study

International Nuclear Information System (INIS)

Nagadi, M.M.; Naqvi, A.A.

2007-01-01

Monte Carlo calculations were carried out to study the dependence of γ-ray yield on the bulk density and moisture content of a sample in a thermalneutron capture-based prompt gamma neutron activation analysis (PGNAA) setup. The results of the study showed a strong dependence of the γ-ray yield upon the sample bulk density. An order of magnitude increase in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in a Portland cement sample was observed for a corresponding order of magnitude increase in the sample bulk density. On the contrary the γ-ray yield has a weak dependence on sample moisture content and an increase of only 20% in yield of 1.94 and 6.42 MeV prompt γ-rays from calcium in the Portland cement sample was observed for an order of magnitude increase in the moisture content of the Portland cement sample. A similar effect of moisture content has been observed on the yield of 1.167 MeV prompt γ-rays from chlorine contaminants in Portland cement samples. For an order of magnitude increase in the moisture content of the sample, a 7 to 12% increase in the yield of the 1.167 MeV chlorine γ-ray was observed for the Portland cement samples containing 1 to 5 wt.% chlorine contaminants. This study has shown that effects of sample moisture content on prompt γ-ray yield from constituents of a Portland cement sample are insignificant in a thermal-neutrons capture-based PGNAA setup. (author)

Ferromagnetism and temperature-dependent electronic structure in metallic films

International Nuclear Information System (INIS)

Herrmann, T.

1999-01-01

-, layer-, and temperature-dependent. The last part of this work is concerned about the temperature-driven reorientation transition in thin metallic films. For the description of the magnetic anisotropy in thin films the dipole interaction as well as the spin-orbit interaction have to be included in the model. By calculating the temperature-dependence of the magnetic anisotropy energy it is found that both types of temperature-driven reorientation transitions, from out-of-plane to in-plane (''Fe-type'') and from in-plane to out-of-plane(''Ni-type'') magnetization are possible within the generalized Hubbard films

Strain path dependency in metal plasticity

NARCIS (Netherlands)

Viatkina, E.M.; Brekelmans, W.A.M.; Geers, M.G.D.

2003-01-01

A change in strain path has a significant effect on the mechanical response of metals. Strain path change effects physically originate from a complex microstructure evolution. This paper deals with the contribution of cell structure evolution to the strain path change effect. The material with cells

Heavy metal and trace element contents in edible muscle of three commercial fish species, and assessment of possible risks associated with their human consumption in Saudi Arabia

Directory of Open Access Journals (Sweden)

Sabry Mohamed El-Bahr

2015-09-01

Full Text Available Three different highly consumed fish species from Al-Ahsa market, Saudi Arabia namely Spangled emporer (Lethriuns nebulosus, Red striped seabream (Pagrus major and Black seabream (Spondyliosoma cantharus were evaluated for their muscle contents of heavy metals (e.g., Cd and Pb and trace elements (e.g., Cu, Zn, Fe and Mn. The possible risks associated with their human consumption were also studied. A total of 60 fresh fish samples comprising of 20 samples from each above mentioned fish were collected, and were subjected for determination of heavy metal and trace element contents by Atomic Absorption Spectrophotometry after Microwave Wet Digestion. The results showed that, accumulation patterns of the heavy metals and trace elements followed the order: Fe > Zn > Cu > Mn > Pb > Cd. There were variations among metal contents in the muscles of the three fish species; S. cantharus accumulated the highest levels of Cu, Zn and Mn, while the highest level of Fe could be detected in the muscles of P. major. The concentration of Cd and Pb remained comparable in the muscles of all three fish species. The calculated maximum daily intake (MDI values were found as 0.0003, 0.0009, 0.0035, 0.0001, 0.0000, 0.0000 mg/day/person for Cu, Zn, Fe, Mn, Cd and Pb, respectively. Conclusively, the present study indicated that, fish muscles contain relatively less burden of heavy metals and trace elements, and no health problem can be raised from human consumption of the examined commercial fishes at Al-Ahsa market, Saudi Arabia. [J Adv Vet Anim Res 2015; 2(3.000: 271-278

Structural conditions of maximal plasticity of two-phase metal materials

International Nuclear Information System (INIS)

Movchan, B.A.

1975-01-01

Analysis is given of experimental values of the strength and plasticity of iron- and tungsten-based two-phase materials with the regulated amount of the second phase and the grain size. Specimens in the form of a 120 mm x 200 mm sheet with a thickness of 0.8-1.2 mm are prepared by means of the electron beam evaporation technique and subsequent condensation of the materials on a preheated support. The variable content of the second phase along the sheet in the range 0.5 volume per cent and more than a 10-fold change in the grain size of the metallic matrix are attained by a simultaneous evaporation of pure metal (99.98 per cent) and nonlmetallic material-niobium carbide or zirconium dioxide ZrO 2 -from two separate sources. The content of arbitrarily distributed spherical particles of the second phase corresponding to a maximum of the plasticity depends only on the structural parameter - the d/D ratio. The absolute falue of the plasticity and its dependence on the temperature is a complex function of many variables - mechanical properties of particles and the matrix, peculiarities of interphase interaction on the boundary particle - matrix, the size of particles, the rate of plastic deformation and relaxation processes

Analysis of metals in asphaltenes of KU-46 by PIXE analysis; Analisis de metales en asfaltenos de crudo mexicano KU-46 por PIXE

Energy Technology Data Exchange (ETDEWEB)

Navidad G, P.; Pina L, L.I.; Lopez M, J.; Ramirez T, J.J.; Aspiazu F, J.A.; Romero G, E.T. [Gerencia de Ciencias Basicas, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

2002-07-01

The content of metals of the asphaltenes obtained from the KU-46 mexican crude with n-heptane was evaluated. The found metals in higher concentration are transition metals as well as the vanadium, nickel, copper and zinc. Moreover the sulfur in high concentrations was quantified. The metallic content of the asphaltenes revealed that the crude contains a lower quantity of metals unlike the vacuum residue previously analysed. (Author)

Spin dependent transport of hot electrons through ultrathin epitaxial metallic films

Energy Technology Data Exchange (ETDEWEB)

Heindl, Emanuel

2010-06-23

In this work relaxation and transport of hot electrons in thin single crystalline metallic films is investigated by Ballistic Electron Emission Microscopy. The electron mean free paths are determined in an energy interval of 1 to 2 eV above the Fermi level. While fcc Au-films appear to be quite transmissive for hot electrons, the scattering lengths are much shorter for the ferromagnetic alloy FeCo revealing, furthermore, a strong spin asymmetry in hot electron transport. Additional information is gained from temperature dependent studies in combination with golden rule approaches in order to disentangle the impact of several relaxation and transport properties. It is found that bcc Fe-films are much less effective in spin filtering than films made of the FeCo-alloy. (orig.)

Microarray study of temperature-dependent sensitivity and selectivity of metal/oxide sensing interfaces

Science.gov (United States)

Tiffany, Jason; Cavicchi, Richard E.; Semancik, Stephen

2001-02-01

Conductometric gas microsensors offer the benefits of ppm-level sensitivity, real-time data, simple interfacing to electronics hardware, and low power consumption. The type of device we have been exploring consists of a sensor film deposited on a "microhotplate"- a 100 micron platform with built-in heating (to activate reactions on the sensing surface) and thermometry. We have been using combinatorial studies of 36-element arrays to characterize the relationship between sensor film composition, operating temperature, and response, as measured by the device's sensitivity and selectivity. Gases that have been tested on these arrays include methanol, ethanol, dichloromethane, propane, methane, acetone, benzene, hydrogen, and carbon monoxide, and are of interest in the management of environmental waste sites. These experiments compare tin oxide films modified by catalyst overlayers, and ultrathin metal seed layers. The seed layers are used as part of a chemical vapor deposition process that uses each array element's microheater to activate the deposition of SnO2, and control its microstructure. Low coverage (20 Ê) catalytic metals (Pd, Cu, Cr, In, Au) are deposited on the oxides by masked evaporation or sputtering. This presentation demonstrates the value of an array-based approach for developing film processing methods, measuring performance characteristics, and establishing reproducibility. It also illustrates how temperature-dependent response data for varied metal/oxide compositions can be used to tailor a microsensor array for a given application.

ASTM Committee G-4 metals flammability test program - Data and discussion

Science.gov (United States)

Stoltzfus, Joel M.; Homa, John M.; Williams, Ralph E.; Benz, Frank J.

1988-01-01

Results of metals flammability tests performed on twenty-six metals in the NASA/White Sands Test Facility are discussed together with the test systems. The promoted combustion and ignition characteristics of these metals are described, and the metals are ranked according to their suitability for use in oxygen systems. In general, alloys with high copper and nickel contents and low iron content were found to rank higher than those that had high iron content, while alloys that had high aluminum content were ranked the lowest.

Characteristics of tree bark as an indicator in high-immission areas : II. Contents of heavy metals.

Science.gov (United States)

Lötschert, W; Köhm, H -J

1978-01-01

1. Studies on indicator characteristics of bark of deciduous trees have been continued by measuring accumulation of Pb, Cd, Ni and Mn in the bark of Fraxinus excelsior at 34 sampling sites over an area of 150 km 2 in the immission area of Frankfurt am Main. 2. Iso-lines of equal Pb-contamination have been found. They include zones of graduated immissions. The pattern of these zones shows an eccentrical orientation and is the result of the distribution of the main traffic roads. A significant correlation of Pb in the bark and traffic congestion has been found. 3. The zones of Cd-contamination stretch from SW to NE. The orientation of these zones is determined by the distribution of the big emittenrs and the centers of heating power in the area and the predominating direction of wind. 4. A correlation between the accumulation of Pb and Cd has been detected. It is less significant than that between pH-value and sulfur content in the bark of trees in former investigations. 5. The distribution of Pb and Mn is antagonistic in the bark of Fraxinus excelsior and parallel in the needles of Taxus baccata. The content of Mn in the bark of Fraxinus is low. It must be accepted that this is partly an effect of elution by sulfur acid-aerosol formation. 6. The strongest accumulation of heavy metal immissions is found in mosses on the ground, mainly in Bryum argenteum. Nevertheless the bark of Fraxinus excelsior has shown consequently its accumulation characteristics as a good immission indicator for heavy metal contaminations by traffic and big emittents.

The distribution of heavy metals content in the bottom deposits of the trans-border Uzh river system

Directory of Open Access Journals (Sweden)

M. V. Bilkey

2017-05-01

Full Text Available The dynamics and peculiarities of the heavy metals (Cu, Pb, Zn, As, V, Cr, Ni migration were established in the system of the river Uzh bottom deposits. An excess in maximum permissible concentration among such elements as Zn, V, As, and Cu was detected in surface waters. We may connect the elevated level of Cu and Zn with natural (metals appearing in ground water run-off, ablation from iron ore, the reaction of interstitial water, anthropogenic (sewage disposals from communal households and manufacturing plants, agricultural run-offs, and hydrochemical (pH of water medium, methylation of non-organic metal compounds, metals release from the organic compounds composition, ingress from bottom deposits factors. The high concentrations of vanadium in water as well as in bottom deposits are most probably induced by the leaching of elements from the regional volcanic rocks. The plumbum content did not exceed the higher-than-normal rates; however, significant element accumulation was detected in bottom deposits outside the city of Uzhgorod which may be the result of ecotoxicant ingress along with land runoff from the riverside highways laid parallel to the water course. In comparison with background measures, the highest chromium and nickel concentrations were detected near the streamlet Domoradzh and, therefore, it is assumed that the industrial wastewaters serve here as a source of heavy metals. The reservoir in the lowland is above all enriched by arsenic. Areas under agricultural use are significantly concentrated in lowlands. Runoffs from these areas are the main source of the ore supply. However, the impact of municipal domestic waste water which contains arsenic-containing detergents should not be excluded. Moreover, we found a relationship between the relief heterogeneity of the study area and distribution of heavy metals in the hydro-ecosystem. The accomplished comparative analysis of the territories under study indicates the significant

Dependence of heavy metal burnup on nuclear data libraries for fast reactors

CERN Document Server

Ohki, S

2003-01-01

Japan Nuclear Cycle Development Institute (JNC) is considering the highly burnt fuel as well as the recycling of minor actinide (MA) in the development of commercialized fast reactor cycle systems. Higher accuracy in burnup calculation is going to be required for higher mass plutonium isotopes ( sup 2 sup 4 sup 0 Pu, etc.) and MA nuclides. In the framework of research and development aiming at the validation and necessary improvements of fast reactor burnup calculation, we investigated the differences among the burnup calculation results with the major nuclear data libraries: JEF-2.2, ENDF/B-VI Release 5, JENDL-3.2, and JENDL-3.3. We focused on the heavy metal nuclides such as plutonium and MA in the central core region of a conventional sodium-cooled fast reactor. For main heavy metal nuclides ( sup 2 sup 3 sup 5 U, sup 2 sup 3 sup 8 U, sup 2 sup 3 sup 9 Pu, sup 2 sup 4 sup 0 Pu, and sup 2 sup 4 sup 1 Pu), number densities after 1-cycle burnup did not change over one or two percent. Library dependence was re...

How to realize a spin-dependent Seebeck diode effect in metallic zigzag γ-graphyne nanoribbons?

Science.gov (United States)

Wu, Dan-Dan; Liu, Qing-Bo; Fu, Hua-Hua; Wu, Ruqian

2017-11-30

The spin-dependent Seebeck effect (SDSE) is one of the core topics of spin caloritronics. In the traditional device designs of spin-dependent Seebeck rectifiers and diodes, finite spin-dependent band gaps of materials are required to realize the on-off characteristic in thermal spin currents, and nearly zero charge current should be achieved to reduce energy dissipation. Here, we propose that two ferromagnetic zigzag γ-graphyne nanoribbons (ZγGNRs) without any spin-dependent band gaps around the Fermi level can not only exhibit the SDSE, but also display rectifier and diode effects in thermal spin currents characterized by threshold temperatures, which originates from the compensation effect occurring in spin-dependent transmissions but not from the spin-splitting band gaps in materials. The metallic characteristics of ZγGNRs bring about an advantage that the gate voltage is an effective route to adjust the symmetry of spin-splitting bands to obtain pure thermal spin currents. The results provide a new mechanism to realize spin-Seebeck rectifier and diode effects in 2D materials and expand material candidates towards spin-Seebeck device applications.

Survey of mercury, cadmium and lead content of household batteries

Energy Technology Data Exchange (ETDEWEB)

Recknagel, Sebastian, E-mail: sebastian.recknagel@bam.de [BAM Federal Institute for Materials Research and Testing, Department of Analytical Chemistry, Reference Materials, Richard-Willstätter-Straße 11, D-12489 Berlin (Germany); Radant, Hendrik [BAM Federal Institute for Materials Research and Testing, Department of Analytical Chemistry, Reference Materials, Richard-Willstätter-Straße 11, D-12489 Berlin (Germany); Kohlmeyer, Regina [German Federal Environment Agency (UBA), Section III 1.6 Extended Producer Responsibility, Wörlitzer Platz 1, D-06844 Dessau-Roßlau (Germany)

2014-01-15

Highlights: • A well selected sample of 146 batteries was analysed for its heavy metals content. • A comparison was made between heavy metals contents in batteries in 2006 and 2011. • No significant change after implementation of the new EU Batteries Directive. • Severe differences in heavy metal contents were found in different battery-types. - Abstract: The objective of this work was to provide updated information on the development of the potential impact of heavy metal containing batteries on municipal waste and battery recycling processes following transposition of the new EU Batteries Directive 2006/66/EC. A representative sample of 146 different types of commercially available dry and button cells as well as lithium-ion accumulators for mobile phones were analysed for their mercury (Hg)-, cadmium (Cd)- and lead (Pb)-contents. The methods used for preparing the cells and analysing the heavy metals Hg, Cd, and Pb were either developed during a former study or newly developed. Several batteries contained higher mass fractions of mercury or cadmium than the EU limits. Only half of the batteries with mercury and/or lead fractions above the marking thresholds were labelled. Alkaline–manganese mono-cells and Li-ion accumulators, on average, contained the lowest heavy metal concentrations, while zinc–carbon batteries, on average, contained the highest levels.

Survey of mercury, cadmium and lead content of household batteries

International Nuclear Information System (INIS)

Recknagel, Sebastian; Radant, Hendrik; Kohlmeyer, Regina

2014-01-01

Highlights: • A well selected sample of 146 batteries was analysed for its heavy metals content. • A comparison was made between heavy metals contents in batteries in 2006 and 2011. • No significant change after implementation of the new EU Batteries Directive. • Severe differences in heavy metal contents were found in different battery-types. - Abstract: The objective of this work was to provide updated information on the development of the potential impact of heavy metal containing batteries on municipal waste and battery recycling processes following transposition of the new EU Batteries Directive 2006/66/EC. A representative sample of 146 different types of commercially available dry and button cells as well as lithium-ion accumulators for mobile phones were analysed for their mercury (Hg)-, cadmium (Cd)- and lead (Pb)-contents. The methods used for preparing the cells and analysing the heavy metals Hg, Cd, and Pb were either developed during a former study or newly developed. Several batteries contained higher mass fractions of mercury or cadmium than the EU limits. Only half of the batteries with mercury and/or lead fractions above the marking thresholds were labelled. Alkaline–manganese mono-cells and Li-ion accumulators, on average, contained the lowest heavy metal concentrations, while zinc–carbon batteries, on average, contained the highest levels

Flow analysis of metals in a municipal solid waste management system

International Nuclear Information System (INIS)

Jung, C.H.; Matsuto, T.; Tanaka, N.

2006-01-01

This study aimed to identify the metal flow in a municipal solid waste (MSW) management system. Outputs of a resource recovery facility, refuse derived fuel (RDF) production facility, carbonization facility, plastics liquefaction facility, composting facility, and bio-gasification facility were analyzed for metal content and leaching concentration. In terms of metal content, bulky and incombustible waste had the highest values. Char from a carbonization facility, which treats household waste, had a higher metal content than MSW incinerator bottom ash. A leaching test revealed that Cd and Pb in char and Pb in RDF production residue exceeded the Japanese regulatory criteria for landfilling, so special attention should be paid to final disposal of these substances. By multiplying metal content and the generation rate of outputs, the metal content of input waste to each facility was estimated. For most metals except Cr, the total contribution ratio of paper/textile/plastics, bulky waste, and incombustible waste was over 80%. Approximately 30% of Cr originated from plastic packaging. Finally, several MSW management scenarios showed that most metals are transferred to landfills and the leaching potential of metals to the environment is quite small

Dietary Intake of Metals from Fresh Cage-Reared Hens’ Eggs in Tenerife, Canary Islands

Directory of Open Access Journals (Sweden)

Carmen Rubio

2017-01-01

Full Text Available The concentrations of 20 metals (Na, K, Ca, Mg, V, Mn, Fe, Cu, Zn, Cr, Mo, Co, B, Ba, Sr, Ni, Si, Al, Pb, and Cd in cage-reared hens’ eggs have been determined in this study using inductively coupled plasma atomic emission spectroscopy (ICP-OES. There were significant differences in the metal content depending on the edible part of the egg, with the yolk having the greater concentrations of metals. The daily consumption of eggs (24.3 g/person/day for children and 31.2 g/person/day for adults contributes to the intake of trace metals, notably Fe (3.8% children, 3.2% women, and 6.5% men and Zn (4.5% children, 6.6% women, and 4.9% men. In addition, the consumption of eggs does not imply a high contribution of toxic metals.

Surface treatment of non-ferrous metal samples to be certified for their oxygen, nitrogen and carbon content

International Nuclear Information System (INIS)

Weber, G.Y.; Quaglia, L.; David, D.; Pauwels, J.; Vanaudenhove, J.

1977-01-01

Surface treatment on non-ferrous metals is proposed in order to minimize or determine quantitatively the interference of gaseous contamination. Two types of surface treatment have been applied to the specimens; mechanical treatment (sawing, turning, polishing); chemical treatment (etching). Three main conditions govern the choice of treatment: it must give a minimum surface content of the elements to be determined; it must exhibit the reproducibility of the treatment; it must be easy to perform with the normal equipment in the analytical laboratories concerned. A table corresponding to each element gives the range of surface content liable to be used for corrections of determination in the mass, a mechanical treatment, a chemical etching. The elements concerned are: Ta, Mo, W, Ti, Zr, Nb, Cu, Cu/Zn, Al, Al/Mg, Al/Si, Pb, Pb/Sb, Si, Ge, GaAs. The proposals result from a large number of determinations of superficial contamination on several materials using microanalysis by nuclear reactions. (T.G.)

Disorder dependence of the magnetic moment of the half-metallic ferromagnet NiMnSb from first principles

International Nuclear Information System (INIS)

Orgassa, D.; Fujiwara, H.; Schulthess, T. C.; Butler, W. H.

2000-01-01

Using half-metallic ferromagnets in spin-dependent devices, like spin valves and ferromagnetic tunnel junctions, is expected to increase the device performance. However, using the half-metallic ferromagnet NiMnSb in such devices led to much less than ideal results. One of the possible sources for this behavior is atomic disorder. First-principles calculations of the influence of atomic disorder on the electronic structure of NiMnSb underline the sensitivity of half-metallic properties in NiMnSb to atomic disorder. In this article, we report on the disorder dependence of the total magnetic moment calculated by applying the layer Korringa-Kohn-Rostoker method in conjunction with the coherent potential approximation. We consider the following types of disorder: (1) intermixing of Ni and Mn, (2) partial occupancy of a normally vacant lattice site by Ni and Mn, and (3) partial occupancy of this site by Mn and Sb. In all cases the composition is kept stoichiometric. All three types of disorder decrease the moment monotonically with increasing disorder levels. For the experimentally seen disorder of 5% Mn and 5% Sb on the normally vacant lattice site, the total moment is decreased by 4.1%. The results suggest that precise measurement of the saturation magnetization of NiMnSb thin films can give information on the disorder. (c) 2000 American Institute of Physics

Leaching characteristics of rare metal elements and chlorine in fly ash from ash melting plants for metal recovery.

Science.gov (United States)

Jung, Chang-Hwan; Osako, Masahiro

2009-05-01

In terms of resource recovery and environmental impact, melting furnace fly ash (MFA) is attracting much attention in Japan due to its high metal content. The study aims to obtain fundamental information on using a water extraction method not only to concentrate valuable rare metals but also to remove undesirable substances such as chlorine for their recovery from MFA. The composition and leaching characteristics of MFA was investigated. The results revealed that the metal content in MFA is nearly equal to raw ore quality. The content of Ag, In, Pd, Pb, and Zn is, in fact, higher than the content of raw ore. As for leaching behavior, Ag, Bi, In, Ga, Ge, Sb, Sn, and Te showed the lowest release at a neutral pH range. Pd was leached constantly regardless of pH, but its concentration was quite low. On the other hand, most of the Tl was easily leached, revealing that water extraction is not appropriate for Tl recovery from MFA. Major elements Cl, Ca, Na, and K, occupying about 70% of MFA, were mostly leached regardless of pH. Base metal elements Cu, Pb, and Zn showed minimum solubility at a neutral pH. The leaching ratio of target rare metal elements and base metal elements suggests that the optimal pH for water extraction is 8-10, at which the leaching concentration is minimized. The water extraction process removed most of the Cl, Ca, Na, and K, and the concentration of rare metals and base metals increased by four or five times.

Temperature-dependent piezoresistivity in an MWCNT/epoxy nanocomposite temperature sensor with ultrahigh performance

International Nuclear Information System (INIS)

Alamusi; Li, Yuan; Hu, Ning; Wu, Liangke; Liu, Yaolu; Ning, Huiming; Li, Jinhua; Surina; Yuan, Weifeng; Chang, Christiana; Atobe, Satoshi; Fukunaga, Hisao

2013-01-01

A temperature sensor was fabricated from a polymer nanocomposite with multi-walled carbon nanotube (MWCNT) as nanofiller (i.e., MWCNT/epoxy). The electrical resistance and temperature coefficient of resistance (TCR) of the temperature sensor were characterized experimentally. The effects of temperature (within the range 333–373 K) and MWCNT content (within the range 1–5 wt%) were investigated thoroughly. It was found that the resistance increases with increasing temperature and decreasing MWCNT content. However, the resistance change ratio related to the TCR increases with increasing temperature and MWCNT content. The highest value of TCR (0.021 K −1 ), which was observed in the case of 5 wt% MWCNT, is much higher than those of traditional metals and MWCNT-based temperature sensors. Moreover, the corresponding numerical simulation—conducted to explain the above temperature-dependent piezoresistivity of the nanocomposite temperature sensor—indicated the key role of a temperature-dependent tunneling effect. (paper)

The Analysis Of The Heavy Metals Pollution In The River Water For Fishing Accusative The Surrounding UJUNG LEMAH ABANG Area

International Nuclear Information System (INIS)

Hariani, Sri; Susiati, Heni; Sjarmufni, A.

2001-01-01

Metals are introduced into aquatic systems as a result of the weathering of soils or rocks, from volcanic eruptions and from a variety of human activities involving the mining, processing, or use of metals and/or substances that contain metal contaminants. The metal natural contents will changeable depends on the pollutant which is proportionally occurred in the environment. The extremely heavy metals absorption by organisms Directly or indirectly through the food chain will give the significant impact to the human lives. For this purpose an investigation was carried out to take samples of heavy metals from the river (Doplang, Balong, and Pacitran) surrounding the Ujung Lemah abang area, and to see how far was the impact of pollutants to the community who live nearby from the food-chain point of view. Results showed that the heavy metals content of Cd, Fe, Cu and Hg in the water and sediment are higher than the permissible concentration for fish nursery. It is found that the concentration of Cd between 0.91 - 1.85 μg/ml, Cu: 0.03 μg/ml, and Fe: 0.16 - 2.51 μg/ml, whereas concentration of Hg in sediment between 0.036 - 0.118 mg/g. Up to now there are no report yet to the death fish caused by the more content of heavy metals in their body or the sickness related to it in the community around the location, but nevertheless this condition need to be took attention

Volcanic sulfur degassing and the role of sulfides in controlling volcanic metal emissions

Science.gov (United States)

Edmonds, M.; Liu, E.

2017-12-01

Volcanoes emit prodigious quantities of sulfur and metals, their behaviour inextricably linked through pre-eruptive sulfide systematics and through degassing and speciation in the volcanic plume. Fundamental differences exist in the metal output of ocean island versus arc volcanoes, with volcanoes in Hawaii and Iceland outgassing large fluxes of gaseous and particulate chalcophiles; and arc volcanoes' plumes, in contrast, enriched in Zn, Cu, Tl and Pb. Metals and metalloids partition into a magmatic vapor phase from silicate melt at crustal pressures. Their abundance in magmatic vapor is influenced strongly by sulfide saturation and by the composition of the magmatic vapor phase, particularly with respect to chloride. These factors are highly dependent on tectonic setting. Metal outgassing is controlled by magma water content and redox: deep saturation in vapor and minimal sulfide in arc basalts yields metal-rich vapor; shallow degassing and resorption of sulfides feeds the metal content of volcanic gas in ocean islands. We present a detailed study of the sulfide systematics of the products of the 2014-2015 Holuhraun basaltic fissure eruption (Bárðarbunga volcanic system, Iceland) to illustrate the interplay between late water and sulfur outgassing; sulfide saturation and breakdown; and metal partitioning into a vapor phase. Sulfide globules, representing quenched droplets of an immiscible sulfide liquid, are preserved within erupted tephra. Sulfide globules in rapidly quenched tephra are preserved within both matrix glass and as inclusions in crystals. The stereologically-corrected 3D size distribution of sulfide globules ranges from importance in supplying sulfur and metals to the atmosphere during eruption.

Heavy metal contents in growth bands of Porites corals: Record of anthropogenic and human developments from the Jordanian Gulf of Aqaba

International Nuclear Information System (INIS)

Al-Rousan, Saber A.; Al-Shloul, Rashid N.; Al-Horani, Fuad A.; Abu-Hilal, Ahmad H.

2007-01-01

In order to assess pollutants and impact of environmental changes in the coastal region of the Jordanian Gulf of Aqaba, concentrations of six metals were traced through variations in 5 years growth bands sections of recent Porties coral skeleton. X-radiography showed annual growth band patterns extending back to the year 1925. Baseline metal concentrations in Porites corals were established using 35 years-long metal record from late Holocene coral (deposited in pristine environment) and coral from reef that is least exposed to pollution in the marine reserve in the Gulf of Aqaba. The skeleton samples of the collected corals were acid digested and analyzed for their Cd, Cu, Fe, Mn, Pb and Zn content using Flame Atomic Absorption Spectrophotometer (FAAS). All metal profiles (except Fe and Zn) recorded the same metal signature from recent coral (1925-2005) in which low steady baseline levels were displayed in growth bands older than 1965, similar to those obtained from fossil and unpolluted corals. Most metals showed dramatic increase (ranging from 17% to 300%) in growth band sections younger than 1965 suggesting an extensive contamination of the coastal area since the mid sixties. This date represents the beginning of a period that witnessed increasing coastal activities, constructions and urbanization. This has produced a significant reduction in coral skeletal extension rates. Results from this study strongly suggest that Porites corals have a high tendency to accumulate heavy metals in their skeletons and therefore can serve as proxy tools to monitor and record environmental pollution (bioindicators) in the Gulf of Aqaba

Heavy metal contents in growth bands of Porites corals: Record of anthropogenic and human developments from the Jordanian Gulf of Aqaba

Energy Technology Data Exchange (ETDEWEB)

Al-Rousan, Saber A. [Marine Science Station, University of Jordan and Yarmouk University, P.O. Box 195, Aqaba 77110 (Jordan)], E-mail: s.rousan@ju.edu.jo; Al-Shloul, Rashid N. [Department of Earth and Environmental Science, Faculty of Science, Yarmouk University, Irbid 21163 (Jordan); Al-Horani, Fuad A. [Marine Science Station, University of Jordan and Yarmouk University, P.O. Box 195, Aqaba 77110 (Jordan); Abu-Hilal, Ahmad H. [Department of Earth and Environmental Science, Faculty of Science, Yarmouk University, Irbid 21163 (Jordan)

2007-12-15

In order to assess pollutants and impact of environmental changes in the coastal region of the Jordanian Gulf of Aqaba, concentrations of six metals were traced through variations in 5 years growth bands sections of recent Porties coral skeleton. X-radiography showed annual growth band patterns extending back to the year 1925. Baseline metal concentrations in Porites corals were established using 35 years-long metal record from late Holocene coral (deposited in pristine environment) and coral from reef that is least exposed to pollution in the marine reserve in the Gulf of Aqaba. The skeleton samples of the collected corals were acid digested and analyzed for their Cd, Cu, Fe, Mn, Pb and Zn content using Flame Atomic Absorption Spectrophotometer (FAAS). All metal profiles (except Fe and Zn) recorded the same metal signature from recent coral (1925-2005) in which low steady baseline levels were displayed in growth bands older than 1965, similar to those obtained from fossil and unpolluted corals. Most metals showed dramatic increase (ranging from 17% to 300%) in growth band sections younger than 1965 suggesting an extensive contamination of the coastal area since the mid sixties. This date represents the beginning of a period that witnessed increasing coastal activities, constructions and urbanization. This has produced a significant reduction in coral skeletal extension rates. Results from this study strongly suggest that Porites corals have a high tendency to accumulate heavy metals in their skeletons and therefore can serve as proxy tools to monitor and record environmental pollution (bioindicators) in the Gulf of Aqaba.

PM2.5-bound metal metabolic distribution and coupled lipid abnormality at different developmental windows.

Science.gov (United States)

Ku, Tingting; Zhang, Yingying; Ji, Xiaotong; Li, Guangke; Sang, Nan

2017-09-01

Atmospheric fine particulate matter (PM 2.5 ) is a serious threat to human health. As a toxicant constituent, metal leads to significant health risks in a population, but exposure to PM 2.5 -bound metals and their biological impacts are not fully understood. In this study, we determined the metal contents of PM 2.5 samples collected from a typical coal-burning city and then investigated the metabolic distributions of six metals (Zn, Pb, Mn, As, Cu, and Cd) following PM 2.5 inhalation in mice in different developmental windows. The results indicate that fine particles were mainly deposited in the lung, but PM 2.5 -bound metals could reach and gather in secondary off-target tissues (the lung, liver, heart and brain) with a developmental window-dependent property. Furthermore, elevations in triglycerides and cholesterol levels in sensitive developmental windows (the young and elderly stages) occurred, and significant associations between metals (Pb, Mn, As and Cd) and cholesterol in the heart, brain, liver and lung were observed. These findings suggest that PM 2.5 inhalation caused selective metal metabolic distribution in tissues with a developmental window-dependent property and that the effects were associated with lipid alterations. This provides a foundation for the underlying systemic toxicity following PM 2.5 exposure based on metal components. Copyright © 2017 Elsevier Ltd. All rights reserved.

Tunneling Conductance in Two-Dimensional Junctions between a Normal Metal and a Ferromagnetic Rashba Metal

Science.gov (United States)

Oshima, Daisuke; Taguchi, Katsuhisa; Tanaka, Yukio

2018-03-01

We have studied charge transport in a ferromagnetic Rashba metal (FRM), where both Rashba type spin-orbit coupling (RSOC) and exchange coupling coexist. It has nontrivial metallic states, i.e., a normal Rashba metal (NRM), anomalous Rashba metal (ARM), and Rashba ring metal (RRM), and they are manipulated by tuning the Fermi level with an applied gate voltage. We theoretically studied the tunneling conductance (G) in a normal metal/FRM junction by changing the Fermi level via an applied gate voltage (Vg) on the FRM. We found a wide variation in the Vg dependence of G, which depends on the metallic states. In an NRM, the Vg dependence of G is the same as that in a conventional two-dimensional system. However, in an ARM, the Vg dependence of G is similar to that in a conventional one- (two-)dimensional system for a large (small) RSOC. Furthermore, in an RRM, which is generated by a large RSOC, the Vg dependence of G is similar to that in the one-dimensional system. In addition, these anomalous properties stem from the density of states in the ARM and RRM caused by the large RSOC and exchange coupling rather than the spin-momentum locking of RSOC.

Ecological risk assessment of a coastal zone in Southern Vietnam: Spatial distribution and content of heavy metals in water and surface sediments of the Thi Vai Estuary and Can Gio Mangrove Forest.

Science.gov (United States)

Costa-Böddeker, Sandra; Hoelzmann, Philipp; Thuyên, Lê Xuân; Huy, Hoang Duc; Nguyen, Hoang Anh; Richter, Otto; Schwalb, Antje

2017-01-30

Enrichment of heavy metals was assessed in the Thi Vai Estuary and in the Can Gio Mangrove Forest (SE, Vietnam). Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn contents in water and in sediments were measured. Total organic carbon, nitrogen, phosphorus and C/N ratios were determined. Cu and Cr values were higher than threshold effect level of toxicity, while Ni exceeded probable effect level, indicating the risk of probable toxicity effects. Enrichment factors (EF), contamination factor (CF) and Geo-accumulation index (I-geo) were determined. CF reveals moderate to considerable pollution with Cr and Ni. EF suggests anthropogenic sources of Cr, Cu and Ni. I-geo indicates low contamination with Co, Cu and Zn and moderate contamination with Cr and Ni. Overall metal contents were lower than expected for this highly industrialized region, probably due to dilution, suggesting that erosion rates and hydrodynamics may also play a role in metal contents distribution. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparative study of heavy metals content in cosmetic products of different countries marketed in Khyber Pakhtunkhwa, Pakistan

Directory of Open Access Journals (Sweden)

Hussain Ullah

2017-01-01

Full Text Available The study was undertaken in order to determine heavy metal content in fifteen (n = 15 cosmetics products both imported and locally manufactured by unauthorized company marketed at district Kohat, Khyber Pakhtunkhwa, Pakistan. An analytical test was performed for eight metals in cosmetics products using flame atomic absorption spectrophotometer. The overall mean (n = 15 concentration for each heavy metal was analyzed i.e. Pb, Cd, Cu, Co, Fe, Cr, Ni, Zn were 141.6 ± 0.016, 0.238 ± 0.001, 26.62 ± 0.012, 0.527 ± 0.002, 860.8 ± 0.061, 0.074 ± 0.002, 0.674 ± 0.002 and 268.6 ± 0.086 μg/g, respectively. The results of our study revealed that the concentrations of Fe, Zn, Pb and Cu in the samples within each class under investigation were higher. It also emphasize that the spurious nature of these products cannot be ignored because most of the developing and under developed countries are facing the problems to manufacture good cosmetics products. Hence, are selling these products under the brand name of well reputed national and international companies. Since no safe limit relating to cosmetic products is available in Pakistan, it is therefore difficult to ascertain if the values of metals obtained in this study are too high or low. Prolonged use of such products containing these elements may pose threat to human health and could curb the beauty of the environment.

Influence of load and reinforcement content on selected tribological properties of Al/SiC/Gr hybrid composites

Directory of Open Access Journals (Sweden)

Sandra Veličković

2018-04-01

Full Text Available Hybrid materials with the metal matrix are important engineering materials due to their outstanding mechanical and tribological properties. Here are presented selected tribological properties of the hybrid composites with the matrix made of aluminum alloy and reinforced by the silicon carbide and graphite particles. The tribological characteristics of such materials are superior to characteristics of the matrix – the aluminum alloy, as well as to characteristics of the classical metal-matrix composites with a single reinforcing material. Those characteristics depend on the volume fractions of the reinforcing components, sizes of the reinforcing particles, as well as on the fabrication process of the hybrid composites. The considered tribological characteristics are the friction coefficient and the wear rate as functions of the load levels and the volume fractions of the graphite and the SiC particles. The wear rate increases with increase of the load and the Gr particles content and with reduction of the SiC particles content. The friction coefficient increases with the load, as well as with the SiC particles content increase.

Assessment of the content of arsenic in solid by-products from coal combustion

Directory of Open Access Journals (Sweden)

Wierońska Faustyna

2017-01-01

Full Text Available The coal combustion processes constitute one of the major sources of heavy metals emission into the atmosphere. From the point of view of the reduction of the emission of heavy metals and the selection of the correct exhaust gas treatment system, it is important to monitor the amount of trace elements in the solid fuels and in the solid by-products from coal combustion. One of these highly toxic elements is arsenic. The average content of arsenic in Polish hard coals and lignites is 0 ÷ 40 mg/kg [1] and 5 ÷ 15 mg/kg [2], respectively. The world average content of arsenic in hard coals and lignites, is equal to 9.0 ± 0.8 and 7.4 ± 1.4 mg/kg [3], respectively. During coal combustion processes, a significant amount of arsenic enters the atmosphere through gases and fly ashes. The proportions in which those two forms of arsenic occur in exhaust gases depend on the conditions of combustion processes [4]. The aim of the research was to determine the content of arsenic in coal blends and by-products of their combustion (slag, fly ash, gypsum, filter cakes. The determination of the arsenic quantity was performed using the Atomic Absorption Spectrometry with the electrothermal atomization.

Relating environmental availability to bioavailability: soil-type-dependent metal accumulation in the oligochaete Eisenia andrei.

Science.gov (United States)

Peijnenburg, W J; Baerselman, R; de Groot, A C; Jager, T; Posthuma, L; Van Veen, R P

1999-11-01

Body residues are often better estimates of the amount of a chemical at the sites of toxic action in an organism than ambient soil concentrations, because bioavailability differences among soils are explicitly taken into account in considerations of body residues. Often, however, insufficient attention is paid to the rate and extent at which tissue concentrations respond to soil concentrations and soil characteristics. In this contribution the impact of soil characteristics on the environmental bioavailability of heavy metals for the oligochaete worm Eisenia andrei is reported. Uptake of As, Cd, Cr, Cu, Ni, Pb, and Zn in 20 Dutch field soils and in OECD artificial soil was quantified as a function of time. Internal metal concentrations varied less than the corresponding external levels. Metal uptake and elimination were both metal- and species-dependent. Worms typically attained steady-state concentrations rapidly for Cr, Cu, Ni, and Zn. Internal concentrations similar to those in the cultivation medium, linearly increasing body concentrations, or steady-state internal concentrations well above those in the cultivation medium were found for As, Cd, and Pb. Multivariate expressions were derived to describe uptake rate constants, steady-state concentrations, and bioaccumulation factors as a function of soil characteristics. Soil acidity is the most important solid-phase characteristic modulating the availability of As, Cd, and Pb. Although additional semimechanistic calculations yielded evidence of pore-water-related uptake of Cd and Pb modulated by competition between H(+) and metal ions at the active sites of the membranes, the findings for Cr, Cu, Ni, and Zn point to additional influences, among which is probably regulation. Copyright 1999 Academic Press.

Relationship between metal speciation in soil solution and metal adsorption at the root surface of ryegrass

NARCIS (Netherlands)

Kalis, E.J.J.; Temminghoff, E.J.M.; Town, R.M.; Unsworth, E.R.; Riemsdijk, van W.H.

2008-01-01

Received for publication October 12, 2007. The total metal content of the soil or total metal concentration in the soil solution is not always a good indicator for metal availability to plants. Therefore, several speciation techniques have been developed that measure a defined fraction of the total

A study of heavy metal content and NORM in soil sample outside Lynas Malaysia Sdn. Bhd. Gebeng, Kuantan

International Nuclear Information System (INIS)

Nur Azera Izzati Mohammad

2012-01-01

Lynas Malaysia Sdn. Bhd. is established to build a processing plant of the rare earth lanthanides elements used to produce the starting material for manufacturing high-tech products analysed as cell phones, magnets, computer memory and many more. Analysis of soil samples was carried out outside the Lynas Malaysia Sdn. Bhd. The purpose of this study was to determine the contents of radionuclide activity concentration of natural elements in soil samples of 40 K, 232 Th and 238 U. A total of five heavy metals As, Cd, Cr, Cu and Pb were analysed for concentrations of heavy metals in soil samples. The analysis was performed and analysed using X-ray Fluorescence Spectrometer for the composition and concentration of heavy metals and Gamma Ray Spectrometer is to determine the radionuclide activity concentration of natural elements. Results showed that the concentrations of radionuclides activities for 40 K, 232 Th and 238 U are different at all stations. 40 K radionuclide has the highest radioactivity in the Station 3, which is 385 ± 4 Bq/ kg. For 232 Th and 238 U radionuclides have a high concentration of activity at Station 2 which are 102 ± 3 Bq/ kg and 105 ± 4 Bq/ kg, respectively. According to UNSCEAR 2000 average value, the value obtained exceeds the prescribed level. For heavy metal analysis showed there were only three heavy metals which could be found, namely As, Cr and Cu. For the highest concentration of As element has found at Station 5, which is 25.5 ± 2.1 ppm. For Cr and Cu element, high concentrations has found at Station 5 and Station 1, which are 225 ± 35 ppm and 95 ± ppm, respectively. (author)

Metales pesados en tejido muscular del bagre Ariopsis felis en el sur del golfo de México (2001-2004 Heavy metals in muscular tissue of the catfish, Ariopsis felis, in the southern Gulfof México (2001-2004

Directory of Open Access Journals (Sweden)

Felipe Vázquez

2008-01-01

Full Text Available Se analizó el contenido de metales pesados en tejido muscular del bagre, Ariopsis felis en el sur del golfo de México durante el período 2001-2004. La investigación fue efectuada buscando establecer un marco de referencia ambiental para este organismo. La concentración metálica siguió el orden: Hg We analyzed the heavy metal content in the muscular tissue of the catfish, Ariopsis felis, in the southern Gulf of México between 2001 and 2004. The research was done in order to establish an environmental frame of reference for this organism. The metal concentration was as follows: Hg < Co < Pb < Ni < V < Cr. Cobalt and vanadium contents were found to decrease and those of nickel, mercury, and chromium to ulerease; however, neither of these trends was observed for the lead content. One-way analyses of variance con-firm significant temporal variation only for cobalt, mercury, lead, and vanadium. Significant linear correlation coefficients (p ≤ 0.05 were found for Co-V, Cr-Ni, Cr-Pb, Co-Hg, Ni-V, and V-Pb. The first three associa-tions showed positive correlations, whereas the remaining ones had negative correlations. A factor analysis grouped the studied metals depending on their origins. The metal levels found in the muscular tissue of A. felis from the southern Gulf of México were lower than those set by national and international regulations.

Fabrication of Metallic Hollow Nanoparticles

Science.gov (United States)

Kim, Jae-Woo (Inventor); Choi, Sr., Sang H. (Inventor); Lillehei, Peter T. (Inventor); Chu, Sang-Hyon (Inventor); Park, Yeonjoon (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

2016-01-01

Metal and semiconductor nanoshells, particularly transition metal nanoshells, are fabricated using dendrimer molecules. Metallic colloids, metallic ions or semiconductors are attached to amine groups on the dendrimer surface in stabilized solution for the surface seeding method and the surface seedless method, respectively. Subsequently, the process is repeated with additional metallic ions or semiconductor, a stabilizer, and NaBH.sub.4 to increase the wall thickness of the metallic or semiconductor lining on the dendrimer surface. Metallic or semiconductor ions are automatically reduced on the metallic or semiconductor nanoparticles causing the formation of hollow metallic or semiconductor nanoparticles. The void size of the formed hollow nanoparticles depends on the dendrimer generation. The thickness of the metallic or semiconductor thin film around the dendrimer depends on the repetition times and the size of initial metallic or semiconductor seeds.

Effects of moisture content and initial pH in composting process on heavy metal removal characteristics of grass clipping compost used for stormwater filtration.

Science.gov (United States)

Khan, Eakalak; Khaodhir, Sutha; Ruangrote, Darin

2009-10-01

Heavy metals are common contaminants in stormwater runoff. One of the devices that can be used to effectively and economically remove heavy metals from runoff is a yard waste compost stormwater filter. The primary goal of composting is to reduce waste volume rather than to produce stormwater filter media. Moisture content (MC) and initial pH, the two important parameters in composting, were studied for their effects on yard waste volume reduction and heavy metal adsorption performances of the compost. The main objective of this investigation was to examine whether the conditions that provided high yard waste volume reduction would also result in compost with good heavy metal removal performances. Manila grass was composted at different initial pHs (5-9) and MCs (30-70%) and the composts were used to adsorb cadmium, copper, lead and zinc from water. Results indicated that MC is more critical than initial pH for both volume reduction and production of compost with high metal adsorption performances. The most optimal conditions for the two attributes were not exactly the same but lower MCs of 30-40% and pH 7 or higher tended to satisfy both high volume reduction and effective metal adsorption.

ASSESSMENT OF HEAVY METALS AND CRUDE PROTEIN ...

African Journals Online (AJOL)

UNICORN

to quantify heavy metals (Cu, Zn, Pb and Cd) and crude protein content of these species that are sold in ... in protein, omega 3 and low fat content. Furthermore ... high levels of cadmium can cause kidney and liver damage in man [6]. Motivation .... analysis. Determination of heavy metals in the edible tissues of the organisms.

Time-dependent dielectric breakdown measurements of porous organosilicate glass using mercury and solid metal probes

Energy Technology Data Exchange (ETDEWEB)

Pei, Dongfei; Nichols, Michael T.; Shohet, J. Leon, E-mail: shohet@engr.wisc.edu [Plasma Processing and Technology Laboratory, Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); King, Sean W.; Clarke, James S. [Intel Corporation, Hillsboro, Oregon 97124 (United States); Nishi, Yoshio [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States)

2014-09-01

Time-dependent dielectric breakdown (TDDB) is one of the major concerns for low-k dielectric materials. During plasma processing, low-k dielectrics are subjected to vacuum ultraviolet photon radiation and charged-particle bombardment. To examine the change of TDDB properties, time-to-breakdown measurements are made to porous SiCOH before and after plasma exposure. Significant discrepancies between mercury and solid-metal probes are observed and have been shown to be attributed to mercury diffusion into the dielectric porosities.

Time-dependent dielectric breakdown measurements of porous organosilicate glass using mercury and solid metal probes

International Nuclear Information System (INIS)

Pei, Dongfei; Nichols, Michael T.; Shohet, J. Leon; King, Sean W.; Clarke, James S.; Nishi, Yoshio

2014-01-01

Time-dependent dielectric breakdown (TDDB) is one of the major concerns for low-k dielectric materials. During plasma processing, low-k dielectrics are subjected to vacuum ultraviolet photon radiation and charged-particle bombardment. To examine the change of TDDB properties, time-to-breakdown measurements are made to porous SiCOH before and after plasma exposure. Significant discrepancies between mercury and solid-metal probes are observed and have been shown to be attributed to mercury diffusion into the dielectric porosities

Effects of iron content on electrical resistivity of oxide films on Zr-base alloys

International Nuclear Information System (INIS)

Kubo, Toshio; Uno, Masayoshi

1991-01-01

Measurements of electrical resistivity were made for oxide films formed by anodic oxidation and steam oxidation (400degC/12 h) on Zr plates with different Fe contents. When the Fe content was higher than about 1,000 ppm the electrical resistivity of the steam oxide films was almost equivalent to that of the anodic oxide films, while at lower Fe content the former exhibited lower electrical resistivity than the latter by about 1∼3 orders of magnitude. The anodic oxide film was an almost homogeneous single oxide layer. The steam oxide films, on the other hand, were composed of duplex oxide layers. The oxide layer formed in the vicinity of the oxide/metal interface had higher electrical resistivity than the near-surface oxide layer by about 1∼4 orders of magnitude. The oxide layer in the vicinity of the interface could act as a protective film against corrosion and its electrical resistivity is one important factor controlling the layer protectiveness. The electrical resistivity of the oxide/metal interfacial layer was strongly dependent on the Fe content. One possible reason for Fe to improve the corrosion resistance is that Fe ions would tend to stabilize the tetragonal (or cubic) phase and consequently suppress the formation of open pores and cracks in the interfacial layer. (author)

The use of mosses as environmental metal pollution indicators.

Science.gov (United States)

Aceto, Maurizio; Abollino, Ornella; Conca, Raffaele; Malandrino, Mery; Mentasti, Edoardo; Sarzanini, Corrado

2003-01-01

The possibility of using mosses as environmental indicators of metal pollution has been investigated. Mosses of the species Bryum argenteum were collected from different parts of Piedmont (Italy), ranging from highly polluted areas to nearly uncontaminated mountain areas. Periodical samplings were planned in every site on a monthly base, in order to check variations of metal uptake throughout one year; correlations with pluviometric and thermal patterns were investigated for all sampling stations. On every moss sample 20 elements, ranging from major (K, P, Al, Ca, Fe and Mg) to minor (Mn, Na, Ti and Zn) and trace (As, Ba, Cd, Co, Cr, Cu, Li, Ni, Pb and Sr), were quantitatively determined by inductively coupled plasma-atomic emission spectrometry or graphite furnace-atomic absorption spectrometry, depending on the needed sensitivity. Statistical analyses, carried out with principal component analysis and cluster analysis methods, revealed that a good correlation exists between metal content in mosses and pollution degree in the areas sampled.

The Content of Toxic Metals in Agricultural Produce near a Coal Mine: Case Study KCB in Lazarevac, Serbia

Directory of Open Access Journals (Sweden)

Ana Koprivica

2018-03-01

Full Text Available The monitoring and analysis of concentrations of toxic metals (lead and cadmium in soils and crops indicate that farmland in Serbia is generally not polluted, and the quality of soils is naturally good. Such soils are therefore suitable for organic farming. All noted instances of contamination by toxic metals are of a local nature only, and the result of fertilizers and pesticides, municipal waste, exhaust gases, nearby production facilities, smelting plants, mines, tailings ponds, etc. Locations of this type need to be monitored regularly, and the status of the soil and crops assessed. The results presented in this paper place special emphasis on lead and cadmium. In this regard, the sampling of 67 plant foodstuffs that are being grown in Baroševac village, located in the immediate vicinity of the Kolubara coal mine, was carried out. Fruit samples represented 14.9% and vegetable samples 85.1% of the total sample. The heavy metal content (lead/cadmium in seven samples was above the limits prescribed by the Regulations. Overall exposure of the adult population of Baroševac, calculated on the basis of all samples (67 in total, was 0.89 µg lead per kg of body weight per week, representing only 3.5% provisional tolerable weekly intake (PTWI, and 0.46 cadmium per kg of body weight, which amounts to 6.7% PTWI. Both values point to the fact that the risk is low, even in the case of populations with high exposure to these toxic metals. This suggests that sustainable development may be possible in the near future.

Vegetation pattern and heavy metal accumulation at a mine tailing at Gyöngyösoroszi, hungary.

Science.gov (United States)

Tamás, János; Kovács, Alza

2005-01-01

Vegetation at an abandoned heavy metal bearing mine tailing may have multifunctional roles such as modification of water balance, erosion control and landscape rehabilitation. Research on the vegetation of mine tailings can provide useful information on tolerance, accumulation and translocation properties of species potentially applicable at moderately contaminated sites. Analyses of the relationship between heavy metal content (Pb, Zn and Cu) and vegetation in a mine tailing were carried out. These analyses included: (1) spatial analysis of relationship among heavy metal distribution, pH and vegetation patterns, and (2) analysis of heavy metal accumulation and translocation in some plant species. Presence of vegetation was found to be significantly dependent on pH value, which confirms that phytotoxicity is a function of element concentration in solution, which is primarily controlled by pH value in mine tailings. Among the most abundant plant species, dewberry (Rubus caesius), vipersbugloss (Echium vulgare), scarlet pimpernel (Anagallis arvensis) and narrowleaf plantain (Plantago lanceolata) accumulate significant amounts of Pb, Cu and Zn, while in the case of annual bluegrass (Poa annua) only Pb can be measured in elevated contents. Considering the translocation features, scarlet pimpernel, narrowleaf plantain, and dewberry accumulate heavy metals primarily in their roots, while heavy metal concentration in vipersbugloss and annual bluegrass is higher in the shoots.

Simulating Valence-to-Core X-ray Emission Spectroscopy of Transition Metal Complexes with Time-Dependent Density Functional Theory.

Science.gov (United States)

Zhang, Yu; Mukamel, Shaul; Khalil, Munira; Govind, Niranjan

2015-12-08

Valence-to-core (VtC) X-ray emission spectroscopy (XES) has emerged as a powerful technique for the structural characterization of complex organometallic compounds in realistic environments. Since the spectrum represents electronic transitions from the ligand molecular orbitals to the core holes of the metal centers, the approach is more chemically sensitive to the metal-ligand bonding character compared with conventional X-ray absorption techniques. In this paper we study how linear-response time-dependent density functional theory (LR-TDDFT) can be harnessed to simulate K-edge VtC X-ray emission spectra reliably. LR-TDDFT allows one to go beyond the single-particle picture that has been extensively used to simulate VtC-XES. We consider seven low- and high-spin model complexes involving chromium, manganese, and iron transition metal centers. Our results are in good agreement with experiment.

Temperature dependant thermal and mechanical properties of a metal-phase change layer interface using the time resolved pump probe technique

International Nuclear Information System (INIS)

Schick, V; Battaglia, J-L; Kusiak, A; Rossignol, C; Wiemer, C

2011-01-01

Time Resolved Pump Probe (TRPP) technique has been implemented to study the thermal and mechanical properties of Ge 2 Sb 2 Te 5 (GST) film deposited on a silicon substrate. According to the knowledge of the thermal properties of the GST layer, the temperature dependant Thermal Boundary Resistance (TBR) at the metal-GST interface is evaluated. Measuring the acoustic oscillation and more particularly its damping leads to characterize the adhesion at the metal - GST interface. This quantity can be efficiently related to the temperature dependent TBR in the 25 deg. C - 400 deg. C range. The TBR increases with temperature and follows the changes of the crystalline structure of materials. A linear relation between the acoustic reflection coefficient and the logarithm of the thermal boundary resistance is found.

Characterization of Heavy metals from banana farming soils

Energy Technology Data Exchange (ETDEWEB)

Lin, Dian; Huang, Cheng He; Huang, Dong Yi [College of Agronomy, Hainan University, Haikou City, Hainan Province (China); Ouyang, Ying [Department of Water Resources, St. Johns River Water Management District, Palatka, FL (United States)

2010-06-15

There is a growing public concern about the contamination of heavy metals in agricultural soils in China due to the increasingly applications of chemical fertilizers and pesticides during the last two decades. This study characterized the variability of heavy metals, including copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd), and nickel (Ni), from the banana farming soils in western Hainan Island, China. Five banana farms from different locations in the island were selected to collect 69 mixed-soil samples in this study. Experimental data showed that concentrations of Cu ranged from 3.38 to 54.52, Zn from 24.0 to 189.8, Pb from 15.98 to 58.42, Cd from 0.43 to 3.21, and Ni from 3.47 to 121.86 mg kg{sup -1} dry wt. In general, concentrations of the heavy metals varied with metal species and changed from location to location, which occurred presumably due to the variations of soil parent materials and to a certain extent due to the use of different types of agrochemicals. Our study further revealed that concentrations of Cu and Zn were higher in the banana farming soils than in the natural (control) soils among all of the five locations, whereas mixed results were observed for Pb, Cd, and Ni in both the banana farming and control soils, depending on the locations. Comparisons of the heavy metal concentrations with the Chinese Soil Quality Standards (CSQSs) showed that Cu, Zn, and Pb contents were lower but Cd and Ni contents were higher in the banana farming soils than the Class II standard of the CSQSs. Results suggested that accumulation of Cu, Zn, and Pb in the soils is safe for banana fruit production, whereas accumulation of Cd and Ni in the same soils could potentially pose threats to banana fruit safety. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Analysis of metals in asphaltenes of KU-46 by PIXE analysis

International Nuclear Information System (INIS)

Navidad G, P.; Pina L, L.I.; Lopez M, J.; Ramirez T, J.J.; Aspiazu F, J.A.; Romero G, E.T.

2002-01-01

The content of metals of the asphaltenes obtained from the KU-46 mexican crude with n-heptane was evaluated. The found metals in higher concentration are transition metals as well as the vanadium, nickel, copper and zinc. Moreover the sulfur in high concentrations was quantified. The metallic content of the asphaltenes revealed that the crude contains a lower quantity of metals unlike the vacuum residue previously analysed. (Author)

Bias-dependent amino-acid-induced conductance changes in short semi-metallic carbon nanotubes

International Nuclear Information System (INIS)

Abadir, G B; Walus, K; Pulfrey, D L

2010-01-01

We study the interaction between short semi-metallic carbon nanotubes and different amino acids using molecular dynamics and ab initio (density functional theory/non-equilibrium Green's function) simulations. We identify two different mechanisms of nanotube conductance change upon adsorption of amino acids: one due to the change of the coordinates of the nanotube arising from van der Waals forces of interaction with the adsorbed amino acid; and one due to electrostatic interactions, which appear only in the case of charged amino acids. We also find that the transport mechanism and the changes in the conductance of the tube upon amino acid adsorption are bias dependent.

Thickness of Lipid Deposition on Oral Surfaces Depending on Oil Content and Its Influence on Mouthfeel Perception

Directory of Open Access Journals (Sweden)

Urška Pivk Kupirovič

2012-01-01

Full Text Available Lipid content in food strongly influences food perception on the level of textural properties. Lipids in contact with the tongue and palate are substantially responsible for the sensory impact of a product. The aim of this study is to investigate the impact of oil content on the thickness of lipid deposition on oral surface as well as on the mouthfeel perception. The fluorescent probe method was used to study the thickness of lipid deposition on oral surface. We observed an increase in the thickness of lipid deposition depending on the increase of oil content in oil/water dispersions. Clear correlation was shown between the thickness of lipid deposition on oral surfaces and the perception of mouthfeel. A direct measure of undisrupted deposition of food components on oral surface contributes to the understanding of the behaviour of food components in the mouth and their influence on mouthfeel perception.

Metal-ceramic joint assembly

Science.gov (United States)

Li, Jian

2002-01-01

A metal-ceramic joint assembly in which a brazing alloy is situated between metallic and ceramic members. The metallic member is either an aluminum-containing stainless steel, a high chromium-content ferritic stainless steel or an iron nickel alloy with a corrosion protection coating. The brazing alloy, in turn, is either an Au-based or Ni-based alloy with a brazing temperature in the range of 9500 to 1200.degree. C.

Predicting the release of metals from ombrotrophic peat due to drought-induced acidification

Energy Technology Data Exchange (ETDEWEB)

Tipping, E.; Smith, E.J.; Lawlor, A.J.; Hughes, S.; Stevens, P.A

2003-05-01

Metals stored in peats can be remobilised by sulphuric acid, generated by the drought-induced oxidation of reduced sulphur. - Ombrotrophic peats in northern England and Scotland, close to industrial areas, have substantial contents of potentially toxic metals (Al, Ni, Cu, Zn, Cd and Pb) and of pollutant sulphur, all derived from atmospheric deposition. The peat sulphur, ordinarily in reduced form, may be converted to sulphuric acid under drought conditions, due to the entry of oxygen into the peats. The consequent lowering of soil solution pH is predicted to cause the release of metals held on ligand sites of the peat organic matter. The purpose of the present study was to explore, by simulation modelling, the extent of the metal response. Chemical variables (elemental composition, pH, metal contents) were measured for samples of ombrotrophic peats from three locations. Water extracts of the peats, and samples of local surface water, were also analysed, for pH, dissolved organic carbon (DOC) and metals. Metal release from peats due to acidification was demonstrated experimentally, and could be accounted for reasonably well using a speciation code (WHAM/Model VI). These data, together with information on metal and S deposition, and meteorology, were used to construct a simple description of peat hydrochemistry, based on WHAM/Model VI, that takes into account ion-binding by humic substances (assumed to be the 'active' constituents of the peat with respect to ion-binding). The model was used to simulate steady state situations that approximated the observed soil pH, metal pools and dissolved metal concentrations. Then, drought conditions were imposed, to generate increased concentrations of H{sub 2}SO{sub 4}, in line with those observed during the drought of 1995. The model calculations suggest that the pH will decrease from the initial steady state value of 4.3 to 3.3-3.6 during rewetting periods following droughts, depending upon assumptions about the