WorldWideScience

Sample records for metallurgy lectures chapter

  1. Metallurgy department publications and lectures 1987

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.

    1988-04-01

    A presentation (including abstract) of scientific and technical publications and lectures by the staff of the Metallurgy Department during 1987 is given. The list comprises journal papers, conference papers, reports, lectures and poster presentations in the following categories: Publications, Lectures and Poster Presentations. (author)

  2. TRADITIONAL METALLURGY, NANOTECHNOLOGIES AND STRUCTURAL MATERIALS: A SORBY AWARD LECTURE

    Energy Technology Data Exchange (ETDEWEB)

    Louthan, M

    2007-07-17

    Traditional metallurgical processes are among the many ''old fashion'' practices that use nanoparticles to control the behavior of materials. Many of these practices were developed long before microscopy could resolve nanoscale features, yet the practitioners learned to manipulate and control microstructural elements that they could neither see nor identify. Furthermore, these early practitioners used that control to modify microstructures and develop desired material properties. Centuries old colored glass, ancient high strength steels and medieval organ pipes derived many of their desirable features through control of nanoparticles in their microstructures. Henry Sorby was among the first to recognize that the properties of rocks, minerals, metals and organic materials were controlled by microstructure. However, Mr. Sorby was accused of the folly of trying to study mountains with a microscope. Although he could not resolve nanoscale microstructural features, Mr. Sorby's observations revolutionized the study of materials. The importance of nanoscale microstructural elements should be emphasized, however, because the present foundation for structural materials was built by manipulating those features. That foundation currently supports several multibillion dollar industries but is not generally considered when the nanomaterials revolution is discussed. This lecture demonstrates that using nanotechnologies to control the behavior of metallic materials is almost as old as the practice of metallurgy and that many of the emergent nanomaterials technologists are walking along pathways previously paved by traditional metallurgists.

  3. Putting radiation in perspective. Appendix A. Savannah River Chapter, Health Physics Society, public lecture

    International Nuclear Information System (INIS)

    Cofer, C.H.

    1981-06-01

    The Savannah River Chapter of the Health Physics Society has prepared and presented lectures to more than 20 civic groups in the Central Savannah River Area during the last half of 1980. The purpose of the lectures is to improve public understanding of the risks associated with ionizing radiation. Methods of preparation and presentation of the lectures are discussed along with methods used to obtain speaking invitations. Excerpts from the lectures, response to the lectures, and some typical questions from the question and answer sessions are also included

  4. Metallurgy Department

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The activities of the Metallurgy Department at Risø during 1981 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, Fuel Elements. Furthermore, a survey is given of the department's participation in international collaboration...

  5. Metallurgy Department. Annual progress report for 1989

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1990-07-01

    Selected activities of the Metallurgy Department at Risoe National Laboratory during 1989 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its acitivities within eduation and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publicaltions, lectures and poster presentations are included. (author) 90 refs

  6. Metallurgy Department annual progress report for 1987

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.; Hansen, N.

    1988-05-01

    Selected activities of the Metallurgy Department at Risoe National Laboratory during 1987 are described. The work is presented in four chapters: Materials Science, Materials Engineering, Materials Technology and Energy Programmes. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main numbers illustrating the Departments's economy are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. 38 ills. (author)

  7. Metallurgy Department. Annual progress report for 1988

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.; Hansen, N.

    1989-05-01

    Selected activities of the Metallurgy Department at Risoe National Laboratory during 1988 are described. The work is presented in four chapters: Materials Science, Materials Engineering, Materials Technology and Energy Programmes. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main numbers illustrating the Department's economy are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (author) 36 ills., 81 refs

  8. Metallurgy Department publications 1988

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.

    1989-08-01

    A presentation (including abstracts) of scientific and technical publications and lectures by the staff of the Metallurgy Department during 1988 is given. The list comprises journal papers, conference papers, reports, lectures and poster presentations in the following catagories: Publications, Lectures and Poster Presentations. (author)

  9. Metallurgy Department publications 1989

    International Nuclear Information System (INIS)

    Horsewell, A.

    1990-08-01

    All publiclations by the staff of the Metallurgy Department during 1989 are listed. This list is divided into three sections as follows: Publications (journal and conference papers, reports); Lectures (public lecture presentations) and Posters (poster presentations at conferences and symposia). Abstracts are included. (author)

  10. Metallurgy department progress report for the period 1 January to 31 December 1981

    International Nuclear Information System (INIS)

    1982-07-01

    The activities of the Metallurgy Department at Risoe during 1981 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, Fuel Elements. Furthermore, a survey is given of the department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1981 is included. (author)

  11. Metallurgy department progress report for the period 1 January to 31 December 1982

    International Nuclear Information System (INIS)

    1983-07-01

    The activities of the Metallurgy Department at Risoe during 1982 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Deveopment, Fuel Elements. Furthermore, a survey is given of the department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1982 is included. (author)

  12. Metallurgy Department progress report for the period 1 January to 31 December 1984

    International Nuclear Information System (INIS)

    1985-04-01

    The activities of the Metallurgy Department at Risoe during 1984 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, and Fuel Elements. A survey is given of the Department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1984 is included. (author)

  13. Metallurgy Department. Progress Report for the Period 1 January to 31 December 1984

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The activities of the Metallurgy Department at Risø during 1984 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, and Fuel Elements. A survey is given of the Department's participation in international collaboration and of its...... activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1984 is included....

  14. Metallurgy Department progress report for the period 1 January to 31 December 1986

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde-Soerensen, J.B.

    1987-04-01

    The activities of the Metallurgy Department at Risoe during 1986 are described. The work is presented in four chapters: General Materials Research, Technology and Materials Development, Chemical and Electrochemical Energy Research and Development, and Fuel Elements. A survey is given of the Department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1986 is included. (editors)

  15. Metallurgy department progress report for the period 1 January to 31 December 1977

    International Nuclear Information System (INIS)

    1978-03-01

    The activities of the Metallurgy Department at Risoe during 1977 are described. The work is presented in four chapters: General Materials Research, Technology and Materials Development, Fuel elements, and Non-Destructive Testing. Furthermore, a survey is given of the department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1977 is included. (author)

  16. Metallurgy Department progress report for the period 1 January to 31 December 1985

    International Nuclear Information System (INIS)

    Schroeder Pedersen, A.; Bilde Soerensen, J.B.

    1986-04-01

    The activities of the Metallurgy department at Risoe during 1985 are described. The work is presented in four chapters: General Materials Research, Technology and Materials Development, Chemical and Electrochemical Energy Research and Development, and Fuel elements. A survey is given of the Department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1985 is included. (author)

  17. Metallurgy department progress report for the period 1 January to 31 December 1980

    International Nuclear Information System (INIS)

    1981-07-01

    The activities of the Metallurgy Department at Risoe during 1980 are described. The work is presented in four chapters: General Materials Research, Technology and Materials Development, Fuel Elements, Non-Destructive Testing. Furthermore, a survey is given of the department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1980 is included. (Author)

  18. Metallurgy department progress report for the period 1 January to 31 December 1978

    International Nuclear Information System (INIS)

    1979-04-01

    The activities of the metallurgy department at Risoe during 1978 are described. The work is presented in four chapters: General materials research, technology and materials development, fuel elements, and non-destructive testing. Furthermore, a survey is given of the depratment's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1978 is included. (author)

  19. Metallurgy department progress report for the period 1 January to 31 December 1983

    International Nuclear Information System (INIS)

    1984-06-01

    The activities of the Metallurgy Department at Risoe during 1983 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, and Fuel Elements. Furthermore, a survey is given of the Department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1983 is included. (author)

  20. Implantation metallurgy

    International Nuclear Information System (INIS)

    Picraux, S.T.

    1975-01-01

    Important changes in the near-surface physical properties of metals were obtained by high-fluence ion implantation. Recently there have been an increasing number of studies of the behavior of implanted species with the aim of understanding the detailed physical processes that occur in an implanted metal layer. A key aspect of these implantation metallurgy studies has been the ability to form uniquely controlled systems in the near-surface regions of metals that can be studied with accurate depth resolution. Metallurgical parameters that may be difficult or impossible to obtain by other means can be measured. Also, parameters that depend on the implantation process, due to the athermal introduction of atoms and defects can be determined. Thus the dual objective of implantation metallurgy is to obtain information to improve understanding of the microscopic aspects of metallurgy and to understand how to form controlled new metallurgical systems. Examples of parameters studied include implanted impurity location, diffusion, enhanced diffusion, solubility, precipitation, and dissolution. (auth)

  1. Metallurgy department progress report for the period 1 January to 31 December 1979

    International Nuclear Information System (INIS)

    1980-07-01

    The activities of the Metallurgy Department at Risoe during 1979 are described. The work is presented in four chapters: General material research, technology and materials development, fuel elements, non-destructive testing. An article on wingblades of glass fibre reinforced polyester for a 630 kW windturbine is also included. Furthermore, a survey is given of the department's participation in international collaboration and of its activities within education and training. A list (with abstracts) of publications and lectures by the staff during 1979 is included. (author)

  2. The metallurgy, science and engineering

    International Nuclear Information System (INIS)

    Pineau, A.; Quere, Y.

    2011-01-01

    . Provided the political will exists, France has all it needs to restore this field's unity and dynamism. This requires that industrial policies be redefined. This report repositions metallurgy in its double role of a science and engineering discipline from two perspectives: first the perspective of need, progress being the key to success in many areas such as transport and energy, especially nuclear, to mention only the two most prominent ones; then, the perspective of opportunity, metallurgical science and engineering are complex disciplines that feed off each other and lead to many discoveries that result in technical spin-off. We are currently at a crossroad. To lose a dominant position in this area is dangerous, to take on a leading position is a challenge that must be met. The present report is a summary followed by many annexes. It describes first metallurgy as a science with strong links to engineering, that is metallurgical engineering (chapter 1). The current state of various industrial sectors (chapter 2) and of research and teaching (chapter 3) is examined. In view of the current trends, which have noticeable effects on employment, R and D and expertise among others, the two academies have proposed to private and public decision-makers a strategy outlined in a series of recommendations (vertical line in text margin). It is recommended that: 1. Industrial policy must be redefined and implemented, the problems encountered by metallurgy are only one facet of this policy. 2. Metallurgy, both as a science and an engineering field, should be included in the curricula of engineering schools, universities, CNAM, IUT, BTS (technician training) and others, as a modern scientific and technological discipline that provides many topics of original instruction and major industrial applications. 3. Metallurgical science and engineering should be considered by the major research institutions as ideal interdisciplinary fields that best combine applied and fundamental activities

  3. Project Sherwood: Orientation Lectures presented at Oak Ridge National Labratory, November-December, 1955. Chapter IX. Diffusion Across a Magnetic Field

    Energy Technology Data Exchange (ETDEWEB)

    Simon, Albert

    1957-01-30

    The first part of this chapter will discuss the theory and experiments relating to diffusion in a weakly ionized plasma. The last part of the chapter will discuss the predictions of the classical collision-diffusion theory for diffusion in a fully ionized plasma.

  4. Extractive metallurgy. Recent advances

    International Nuclear Information System (INIS)

    Stevenson, E.J.

    1977-01-01

    Detailed technical information derived from patents issued since 1975 on extractive metallurgy is presented. In part one, concerning copper, the major areas covered are: smelting and roasting; acid leaching; ammonia leach processes; cuprous chloride and ferric chloride; and recovery of copper values from solution. Part two covers other metals, including: nickel and cobalt; ocean floor nodules; lead, zinc, molybdenum and manganese; precious metals; and uranium titanium, tantalum, rhenium, gallium, and other metals

  5. Current programmes of Metallurgy Division (1991)

    International Nuclear Information System (INIS)

    1991-01-01

    Current research and development programmes of the Metallurgy Division are listed under the headings: 1)Thrust Areas, 2)High Temperature Materials Section, 3)Chemical Metallurgy Section, 4)Metallurgical Thermochemistry Section, 5)Physical Metallurgy Section, 6)Mechanical Metallurgy Section, 7)Corrosion Metallurgy Section, 8)Electrochemical Science and Technology Section, 9)Ceramics Section, and 10)Fabrication and Maintenance Group. A list of equipment in the Division and a list of sciientific personnel of the Division are also given. (M.G.B.)

  6. Lithium extractive metallurgy

    International Nuclear Information System (INIS)

    Josa, J.M.; Merino, J.L.

    1985-01-01

    The Nuclear Fusion National Program depends on lithium supplies. Extractive metallurgy development is subordinate to the localization and evaluation of ore resources. Nowadays lithium raw materials usable with present technology consist of pegmatite ore and brine. The Instituto Geologico y Minero Espanol (IGME) found lepidolite, ambligonite and spodrimene in pegmatite ores in different areas of Spain. However, an evaluation of resources has not been made. Different Spanish surface and underground brines are to be sampled and analyzed. If none of these contain significant levels of lithium, the Junta de Energia Nuclear (JEN) will try an agreement with IGME for ENUSA (Empresa Nacional del Uranio, S.A.) to explore pegmatite-ore bodies from different locations. Different work stages, laboratory tests, pilots plants tests and commercial plant, are foreseen, if the deposits are found. (author)

  7. The extractive metallurgy of gold

    Energy Technology Data Exchange (ETDEWEB)

    Kongolo, K.; Mwema, M.D. [University of Lubumbashi, Zaire, Gecamines Metallurgical Research Centre, Likasi, Zaire, c/o Gecamines Brussels (Belgium)

    1998-12-15

    Moessbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Moessbauer spectroscopy could be applied.

  8. The extractive metallurgy of gold

    International Nuclear Information System (INIS)

    Kongolo, K.; Mwema, M.D.

    1998-01-01

    Moessbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Moessbauer spectroscopy could be applied

  9. Physical metallurgy of nickel aluminides

    Indian Academy of Sciences (India)

    A description of the important physical metallurgy aspects of Ni$_3Al and NiAl encompassing structure, crystallographic defects, slip systems and phase stability has been presented in this article. The microstructures generated in the two alloys by conventional as well as novel processing techniques have been discussed.

  10. Metals in Past Societies: A Global Perspective on Indigenous African Metallurgy Shadreck Chirikure

    Energy Technology Data Exchange (ETDEWEB)

    Devanathan, Ram [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-10-01

    This slim book (166 pages) shines a spotlight on pre-industrial African metallurgy, its global connections, and anthropological implications. It integrates seemingly disparate disciplines, such as history, geology, ethnography, archeology, and metallurgy, to illustrate the diversity and innovation in metallurgy across Africa and the role of metals in the rise of socio-economic inequalities and political power. The book has 7 chapters and the focus on metals as enablers of human needs and wants is evident in each chapter. The first chapter presents the context of the work and data sources. The second chapter focuses on the origin and development of mining and metallurgy in pre-industrial Africa. Chapter 3 is dedicated to the interaction of nature and culture in the process of mining. Chapter 4 deals with the transformation of the ore into metal by smelting and the sociocultural aspects of this process. Chapter 5 explores the social and cultural roles acquired by metals as a result of fabrication into objects. Chapter 6 examines the social role of metals, trade in metals, cultural contact, proto-globalization, and technology transfer. Finally, Chapter 7 draws lessons for global anthropology from the African experience. The sources of information are adequately cited and the long list of references at the end of each chapter will be a boon to researchers in this field. The author highlights the cultural aspects and social context of the adoption of metallurgy in Africa while drawing parallels between practices in pre-industrial Africa and those in other parts of the world. The book is peppered with delightful vignettes that offer insights into the process of transforming nature into culturally significant objects. For instance, African miners, like their counterparts in Nepal and Latin America, called upon deities, spirits and ancestors to mediate between nature and humans. Women had distinct roles in this process, but there were variations in these roles and in the

  11. Lectures on Chevalley groups

    CERN Document Server

    Steinberg, Robert

    2016-01-01

    Robert Steinberg's Lectures on Chevalley Groups were delivered and written during the author's sabbatical visit to Yale University in the 1967-1968 academic year. The work presents the status of the theory of Chevalley groups as it was in the mid-1960s. Much of this material was instrumental in many areas of mathematics, in particular in the theory of algebraic groups and in the subsequent classification of finite groups. This posthumous edition incorporates additions and corrections prepared by the author during his retirement, including a new introductory chapter. A bibliography and editorial notes have also been added. This is a great unsurpassed introduction to the subject of Chevalley groups that influenced generations of mathematicians. I would recommend it to anybody whose interests include group theory. -Efim Zelmanov, University of California, San Diego Robert Steinberg's lectures on Chevalley groups were given at Yale University in 1967. The notes for the lectures contain a wonderful exposition of ...

  12. Interactive lecturing.

    Science.gov (United States)

    White, Geoff

    2011-12-01

    Lectures can vary from being entirely teacher-centred through to those that value learner-teacher and learner-learner interaction. Advocates of the exclusively didactic (teacher-centred) lecture aim to maximise the amount of lecture time available to their delivery of content, and regard other activities as 'lost' lecture time. Educational research has, however, identified the potential benefit of interactivity that promotes mentally active learning and improved learning outcomes. This article reviews the notion of 'active learning', outlines how active learning is promoted by interactivity and concludes with strategies for including interactivity within lectures. Narrative review and discussion. The article begins with a summary of the purposes of lecturing, and the distinctions between mentally active and passive learning. The associations between interactivity, cognitively active learning and improved learning outcomes are considered, and strategies for promoting interactivity and active learning are explored. Three student-student interaction strategies are discussed, and an exemplar of each of these strategies in action is provided. The exemplar addresses the 'lost time' concern of some advocates of the exclusively didactic lecture. Interactivity can be readily introduced to lectures without a significant reduction in the amount of time available for didactic lecturing. This paper challenges the view that the inclusion of interactivity equates to a loss of learning time, by showing that students' achievement of learning outcomes is enhanced by planned and structured engagement with others. The paper concludes with an example of how interactivity can be incorporated within the traditional lecture format. © Blackwell Publishing Ltd 2011.

  13. CANDU lectures

    International Nuclear Information System (INIS)

    Rouben, B.

    1984-06-01

    This document is a compilation of notes prepared for two lectures given by the author in the winter of 1983 at the Institut de Genie Nucleaire, Ecole Polytechnique, Montreal. The first lecture gives a physical description of the CANDU reactor core: the nuclear lattice, the reactivity mechanisms, their functions and properties. This lecture also covers various aspects of reactor core physics and describes different calculational methods available. The second lecture studies the numerous facets of fuel management in CANDU reactors. The important variables in fuel management, and the rules guiding the refuelling strategy, are presented and illustrated by means of results obtained for the CANDU 600

  14. Metallurgi for Ingeniører

    DEFF Research Database (Denmark)

    Pedersen, Jan

    Ny gennemarbejdet udgave af den klassiske "Metallurgi for Ingeniører", først skrevet af K. Offer Andersen i 1962......Ny gennemarbejdet udgave af den klassiske "Metallurgi for Ingeniører", først skrevet af K. Offer Andersen i 1962...

  15. Lectures on electromagnetism

    CERN Document Server

    Das, Ashok

    2013-01-01

    These lecture notes on electromagnetism have evolved from graduate and undergraduate EM theory courses given by the author at the University of Rochester, with the basics presented with clarity and his characteristic attention to detail. The thirteen chapters cover, in logical sequence, topics ranging from electrostatics, magnetostatics and Maxwell's equations to plasmas and radiation. Boundary value problems are treated extensively, as are wave guides, electromagnetic interactions and fields. This second edition comprises many of the topics expanded with more details on the derivation of vari

  16. Progress report of the Metallurgy Group

    International Nuclear Information System (INIS)

    Sundaram, C.V.; Moorthy, V.K.

    1975-01-01

    The activities of the Metallurgy Division of the Bhabha Atomic Research Centre, Bombay, during the year 1974 are reported under six sections, namely: ore dressing; extractive metallurgy; ceramics; physical metallurgy; corrosion and electrometallurgy, and radiometallurgy. The developmental programme is not only concerned with materials of nuclear interest such as uranium, thorium, plutonium, zirconium, niobium and beryllium, but also other materials of national interest such as titanium, tantalum, ceramics, corrosion-resistant alloys etc. In addition to the laboratory studies, collaborative work has also been undertaken with other units of the Department of Atomic Energy. (A.K.)

  17. Summary Lecture

    Indian Academy of Sciences (India)

    2016-01-27

    Jan 27, 2016 ... This summary lecture makes no attempt to summarize what was actually said at the meeting, since this is well covered by the other contributors. Instead I have structured my presentation in three parts: First I try to demonstrate why the Sun is unique by comparing it with laboratory plasmas. This is followed ...

  18. Online lectures.

    Science.gov (United States)

    Wink, Diane M

    2010-01-01

    In this bimonthly series, the author examines how nurse educators can use Internet and Web-based computer technologies such as search, communication, and collaborative writing tools; social networking and social bookmarking sites; virtual worlds; and Web-based teaching and learning programs. This article describes the creation of lectures that can be embedded in Web-based courses and presentations.

  19. [Respiratory diseases in metallurgy production workers].

    Science.gov (United States)

    Shliapnikov, D M; Vlasova, E M; Ponomareva, T A

    2012-01-01

    The authors identified features of respiratory diseases in workers of various metallurgy workshops. Cause-effect relationships are defined between occupational risk factors and respiratory diseases, with determining the affection level.

  20. Structural Description of Powder Metallurgy Prepared Materials

    Czech Academy of Sciences Publication Activity Database

    Michalcová, A.; Vojtěch, D.; Kubatík, Tomáš František; Novák, P.; Dvořák, P.

    2014-01-01

    Roč. 14, č. 3 (2014), s. 359-362 ISSN 1213-2489. [Mezinárodní konference „Mikroskopie a nedestruktivní zkoušení materiálů/3./. Litoměřice, 22.10.2014-24.10.2014] Institutional support: RVO:61389021 Keywords : SPS * Intermetallics * powder metallurgy Subject RIV: JG - Metallurgy http://journal.strojirenskatechnologie.cz/templates/obalky_casopis/XIV_2014-3.pdf

  1. Advanced powder metallurgy aluminum alloys and composites

    Science.gov (United States)

    Lisagor, W. B.; Stein, B. A.

    1982-01-01

    The differences between powder and ingot metallurgy processing of aluminum alloys are outlined. The potential payoff in the use of advanced powder metallurgy (PM) aluminum alloys in future transport aircraft is indicated. The national program to bring this technology to commercial fruition and the NASA Langley Research Center role in this program are briefly outlined. Some initial results of research in 2000-series PM alloys and composites that highlight the property improvements possible are given.

  2. Special lecture

    International Nuclear Information System (INIS)

    Yoshikawa, H.

    1998-01-01

    In his special lecture, given at the Artsimovich-Kadomtsev Memorial Session of the 17th IAEA Fusion Energy Conference in Yokohama, October 1998, Prof. H. Yoshikawa stated that the fusion program had come to a crossroads. He was wondering whether the future would lead to cooperation between nations, striving to overcome the difficulties the world is confronted with, or if it would lead to despair

  3. Five Lectures on Photosynthesis

    International Nuclear Information System (INIS)

    Broda, E.

    1979-01-01

    These five lectures were held by E. Broda during the International Symposium on Alternative Energies, in September 1979. Lecture 1 – The Great Physicists and Photosynthesis; Lecture 2 – The Influence of Photosynthesis on the Biosphere. Past, Present and Future; Lecture 3 – The Origin of Photosynthesis; Lecture 4 – The Evolution from Photosynthetic Bacteria to Plants; Lecture 5 – Respiration and Photorespiration. (nowak)

  4. Lectures on matrix field theory

    CERN Document Server

    Ydri, Badis

    2017-01-01

    These lecture notes provide a systematic introduction to matrix models of quantum field theories with non-commutative and fuzzy geometries. The book initially focuses on the matrix formulation of non-commutative and fuzzy spaces, followed by a description of the non-perturbative treatment of the corresponding field theories. As an example, the phase structure of non-commutative phi-four theory is treated in great detail, with a separate chapter on the multitrace approach. The last chapter offers a general introduction to non-commutative gauge theories, while two appendices round out the text. Primarily written as a self-study guide for postgraduate students – with the aim of pedagogically introducing them to key analytical and numerical tools, as well as useful physical models in applications – these lecture notes will also benefit experienced researchers by providing a reference guide to the fundamentals of non-commutative field theory with an emphasis on matrix models and fuzzy geometries.

  5. Fifth Lecture

    Science.gov (United States)

    Montessori, Maria

    2013-01-01

    We include the ninth chapter of "Education and Peace" by Maria Montessori (1949) to draw attention to the relationship between peace and sustainability. Nature is an integral part of peace studies. [Reprinted from "Education and Peace," pages 66-70, copyright © 1972 by Montessori-Pierson Publishing Company.

  6. Powder metallurgy development at SRL

    International Nuclear Information System (INIS)

    Peacock, H.B.

    1978-01-01

    Fuel for Savannah River Plant (SRP) reactors consists of extruded tubes with aluminum--uranium alloy cores clad with 8001 aluminum. The 235 U in the fuel is periodically recovered and recycled in new fuel assemblies. The buildup of 236 U in the enriched uranium requires increased total uranium contents to maintain reactivity in existing assembly designs. High level waste production from these tubes is proportional to the aluminum content; therefore, appreciable radioactive waste reductions result from lower aluminum--uranium ratios and thinner clad tubes. The casting process now used for fuel cores is limited to below 40 wt % U because of the reduced fabricability of high uranium alloys. To increase tube loading and reduce aluminum, the U 3 O 8 -Al powder metallurgy (P/M) process for fuel tubes is under development. Several fabricaion and irradiaion tests have been made using production conditions. Both small scale and production tests carried out at SRL for high-density P/M fuel development are discussed

  7. Opening lecture

    International Nuclear Information System (INIS)

    Thomas, J.B.

    1997-01-01

    The opening lecture on the results of fifty years in the nuclear energy field, deals with the main principles underlying the CEA policy concerning the fission nuclear energy transformation, i.e. the design of a nuclear industry that is a safe, high-performance and reliable source of electric power, the development of an adaptive power generation tool with the capacity to progress according to new constraints, and the necessary anticipation for preparing to the effects of the next 50 year technological leaps

  8. Lectures on Quantum Mechanics

    CERN Document Server

    Basdevant, Jean-Louis

    2007-01-01

    Beautifully illustrated and engagingly written, Lectures on Quantum Mechanics presents theoretical physics with a breathtaking array of examples and anecdotes. Basdevant's style is clear and stimulating, in the manner of a brisk classroom lecture that students can follow with ease and enjoyment. Here is a sample of the book's style, from the opening of Chapter 1: "If one were to ask a passer-by to quote a great formula of physics, chances are that the answer would be 'E = mc2'. Nevertheless, the formula 'E=hV' which was written in the same year 1905 by the same Albert Einstein, and which started quantum theory, concerns their daily life considerably more. In fact, of the three watershed years for physics toward the beginning of the 20th century - 1905: the Special Relativity of Einstein, Lorentz and Poincaré; 1915: the General Relativity of Einstein, with its extraordinary reflections on gravitation, space and time; and 1925: the full development of Quantum Mechanics - it is surely the last which has the mos...

  9. Chapter Seventeen

    African Journals Online (AJOL)

    User

    In the Perspectives of Language and Literature: Essays in Honour of R.U. Uzoezie. Chapter Seventeen ... knowledge, skills and values necessary for a person to become an effective agent of change are provided through .... It was in appreciation of this fact that the European Trade Union Committee for. Education (ETUCE) ...

  10. Opening lecture

    International Nuclear Information System (INIS)

    Vogel, H.J.

    1979-01-01

    In his lecture, the author discusses the question as to whether our technical standards come up to the requirements of our legal system. It is true that acceptance of our technical standards is voluntary but, as in the case of standards issued by the Government, standardization will only prove useful when accepted by the majority of the citizens. This becomes evident in cases where the health and quality of life of the citizens has to be defended against the impacts of technical progress. Here, the state has to fulfil a protective function for the benefit of its citizens. Hence the 'standardization contract' has been agreed upon in order to guarantee compliance of technical standards and requirements with the interests of public life and health. (HSCH) [de

  11. Current programmes on physical metallurgy and related areas in BARC

    International Nuclear Information System (INIS)

    1994-01-01

    Current research and development programmes on physical metallurgy and related areas from the following Divisions of Bhabha Atomic Research Centre are included in this report : Atomic Fuels Division, High Pressure Physics Division, Metallurgy Division, Radio Metallurgy Division, Solid State Physics Division. Important publications corresponding to each activity have also been listed. (author)

  12. Ideate about building green mine of uranium mining and metallurgy

    International Nuclear Information System (INIS)

    Shi Zuyuan

    2012-01-01

    Analysing the current situation of uranium mining and metallurgy; Setting up goals for green uranium mining and metallurgy, its fundamental conditions, Contents and measures. Putting forward an idea to combine green uranium mining and metallurgy with the state target for green mining, and keeping its own characteristics. (author)

  13. Lecture Notes

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh

    "The fundamental objective of the combined safety and Reliability assessment is to identify critical items in the design and the choice of equipment that may jeopardize safety or availability, and thereby to provide arguments for the selection between different options for the system." Achieving...... and actuators. In the past, the normal procedure to address the higher demand for reliability was to add hardware redundancy that in turn increases the production and maintenance costs. Active fault-tolerant design is an attempt to achieve higher redundancy while minimizing the costs. In chapter 2 reliability...

  14. Powder metallurgy development at SRL

    International Nuclear Information System (INIS)

    Peacock, H.B.

    1993-01-01

    The Savannah River Laboratory (SRL) is developing a powder metallurgy (P/M) process for manufacturing reactor-grade fuel tubes containing high wt % U 3 O 8 -Al cores clad with 8001 aluminum. The P/M cores are made by isostatic compaction. They are assembled in billets, outgassed, and hot-extruded using conventional coextrusion techniques. Cores have been compacted with up to 100% U3O 8 and tubes extruded with 80 wt % oxide cores. Irradiation tests have been made using P/M core tubes in the Savannah River reactors. These tubes contained U 3 O 8 concentrations up to 59 wt % and no significant swelling or blistering occurred. The tubes were irradiated to ∼ 40% burnup or 1.6x10 21 fissions/cc of core. This report discusses both small-scale and production tests for high-density P/M fuel development. The purpose of the P/M development program at SRL is to: determine the maximum U 3 O 8 content that can be fabricated into thin wall tubes, irradiate high-density tubes to high burnup and assess irradiation and dimensional stability, continue metal forming studies for extrusion and drawing, and evaluate hydrostatic extrusion and hydrostatically assisted drawing of P/M core tubes. Experimental results of testing the fuel assemblies performance so far indicate that: cores containing fine (-325 mesh) U 3 O 8 and aluminum powders can be made practically free of high-density areas using the outlined P/M pre blending and sieving techniques. U 3 O 8 -Al cores can be isostatically compacted with up to 100 wt U 3 O 8 and tubes successfully extruded with up to 80 wt oxide; fission gas blistering of U 3 O 8 -Al P/M tubes as indicated by the blister tests is a function of fissions/cc of U 3 O 8 in the core; Decreasing the fission density of oxide increases the threshold temperature for blister formation; U 3 O 8 -Al P/M fuel tubes with up to 59 wt U 3 O 8 have been successfully irradiated in SRP reactor to 1.6 x 10 21 fissions/cc of core or 7 x 10 20 fissions/cc of U 3 O 8 small

  15. Biennial activity report of metallurgy programme for 1987 and 1988

    International Nuclear Information System (INIS)

    Shanmugam, V.; Rao, B.P.C.; Bhanu Sankara Rao, K.; Muralidharan, P.; Bhaduri, A.K.; Kuppusami, P.; Shyamsunder, M.T.; Sampath, N.; Sreedharan, O.M.

    1990-01-01

    The research and development (R and D) activities in the field of metallurgy at Indira Gandhi Centre for Atomic Research, Kalpakkam during 1987-1988 are reported in the form of individual summaries arranged under headings : (1) Mechanical Metallurgy Section, (2) Physical Metallurgy Section, (3) Chemical Metallurgy Section, (4) Materials Technology Section, (5) Division for PIE and NDT Development and (6) Quality Engineering Section. A list of publications by the staff scientists working in the field of metallurgy during report period is given in one of the appendices. (author). figs., tabs

  16. Investigations to problems of the implantation metallurgy

    International Nuclear Information System (INIS)

    Rauschenbach, B.

    1987-01-01

    Basing on processes and effects caused ion implantation of metals a review is given about the problems of the implantation metallurgy. Techniques of high-fluence ion implantation and ion beam mixing are generally confined. These techniques change the structure and the chemical composition in the near of the surface of metals. The application of these methods is demonstrated on series of examples. (author)

  17. Powder-Metallurgy Process And Product

    Science.gov (United States)

    Paris, Henry G.

    1988-01-01

    Rapid-solidification processing yields alloys with improved properties. Study undertaken to extend favorable property combinations of I/M 2XXX alloys through recently developed technique of rapid-solidification processing using powder metallurgy(P/M). Rapid-solidification processing involves impingement of molten metal stream onto rapidly-spinning chill block or through gas medium using gas atomization technique.

  18. Development and prospect of china uranium mining and metallurgy

    International Nuclear Information System (INIS)

    Que Weimin; Wang Haifeng; Niu Yuqing; Gu Wancheng; Zhang Feifeng

    2007-01-01

    The development of industry of uranium mining and metallurgy in China has been reviewed generally, emphasizing on investigation approaches and application levels of uranium mining technologies such as in-situ leaching, heap leaching, stope leaching: on the basis of analysis on status of uranium mining and metallurgy and problems existed, also considering the specific features of deposit resources, the development orientation of uranium mining and metallurgy in China is pointed out. The industry of China uranium mining and metallurgy is faced to new opportunity of development and challenge in 21st century, the only way to realize sustainable development of uranium mining and metallurgy and harmonious development between economy and environment is to develop new technology on mining, ore beneficiation and metallurgy, increase the utilization level of uranium resources, low down impact on environment caused by mining and metallurgy. (authors)

  19. Chapter 3

    International Nuclear Information System (INIS)

    Brin, Andre.

    1979-01-01

    Various aspects of the relationship between nuclear energy and the sea are examined in this chapter since, at this moment in time, the sea appears to be a source of cooling water for nuclear power stations; nuclear propulsion has upset a certain number of data on naval forces and the uranium ressources in the water of the seas are sometimes mentioned. But the sea could also become the depository for radioactive waste. Therefore care must be taken to preserve the quality of the marine environment by preventing sizeable amounts of radioactive matter from contaminating it [fr

  20. The Feynman lectures on physics

    International Nuclear Information System (INIS)

    Feynman, R.P.

    1979-01-01

    This set of lectures tries to elucidate from the beginning those features of the quantum mechanics which are most general. The first lectures tackle head on the ideas of a probability amplitude, the interference of amplitudes, the abstract notion of a state, and the superposition and resolution of states - and the Dirac notation is used from the start. In each instance the ideas are introduced together with a detailed discussion of some specific examples - to try to make the physical ideas as real as possible. The time dependence of states including states of definite energy comes next, and the ideas are applied at once to the study of two-state systems. A detailed discussion of the ammonia maser provides the framework for the introduction to radiation absorption and induced transitions. The lectures then go on to consider more complex systems, leading to a discussion of the propagation of electrons in a crystal, and to a rather complete treatment of the quantum mechanics of angular momentum. Our introduction to quantum mechanics ends in Chapter 20 with a discussion of the Schroedinger wave function, its differential equation, and the solution for the hydrogen atom. The last Chapter of this volume is not intended to be a part of the 'course.' It is a 'seminar' on superconductivity and was given in the spirit of some of the entertainment lectures of the first two volumes, with the intent of opening to the students a broader view of the relation of what they were learning to the general culture of physics. Feynman's 'epilogue' serves as the period to the three-volume series [fr

  1. Computational thermodynamics in electric current metallurgy

    DEFF Research Database (Denmark)

    Bhowmik, Arghya; Qin, R.S.

    2015-01-01

    A priori derivation for the extra free energy caused by the passing electric current in metal is presented. The analytical expression and its discrete format in support of the numerical calculation of thermodynamics in electric current metallurgy have been developed. This enables the calculation...... of electric current distribution, current induced temperature distribution and free energy sequence of various phase transitions in multiphase materials. The work is particularly suitable for the study of magnetic materials that contain various magnetic phases. The latter has not been considered in literature....... The method has been validated against the analytical solution of current distribution and experimental observation of microstructure evolution. It provides a basis for the design, prediction and implementation of the electric current metallurgy. The applicability of the theory is discussed in the derivations....

  2. Powder metallurgy bearings for advanced rocket engines

    Science.gov (United States)

    Fleck, J. N.; Killman, B. J.; Munson, H.E.

    1985-01-01

    Traditional ingot metallurgy was pushed to the limit for many demanding applications including antifriction bearings. New systems require corrosion resistance, better fatigue resistance, and higher toughness. With conventional processing, increasing the alloying level to achieve corrosion resistance results in a decrease in other properties such as toughness. Advanced powder metallurgy affords a viable solution to this problem. During powder manufacture, the individual particle solidifies very rapidly; as a consequence, the primary carbides are very small and uniformly distributed. When properly consolidated, this uniform structure is preserved while generating a fully dense product. Element tests including rolling contact fatigue, hot hardness, wear, fracture toughness, and corrosion resistance are underway on eleven candidate P/M bearing alloys and results are compared with those for wrought 440C steel, the current SSME bearing material. Several materials which offer the promise of a significant improvement in performance were identified.

  3. Lectures on general relativity

    CERN Document Server

    Papapetrou, Achille

    1974-01-01

    This book is an elaboration of lecture notes for the graduate course on General Rela­ tivity given by the author at Boston University in the spring semester of 1972. It is an introduction to the subject only, as the time available for the course was limited. The author of an introduction to General Relativity is faced from the beginning with the difficult task of choosing which material to include. A general criterion as­ sisting in this choice is provided by the didactic character of the book: Those chapters have to be included in priority, which will be most useful to the reader in enabling him to understand the methods used in General Relativity, the results obtained so far and possibly the problems still to be solved. This criterion is not sufficient to ensure a unique choice. General Relativity has developed to such a degree, that it is impossible to include in an introductory textbook of a reasonable length even a very condensed treatment of all important problems which have been discussed unt...

  4. Industry Lecture 2010

    DEFF Research Database (Denmark)

    Kragh, Helge

    2010-01-01

    Sammendrag af "Industry Lecture", Norsk Kjemisk Selskap, Universitetet i Oslo, givet 15/10 2010.......Sammendrag af "Industry Lecture", Norsk Kjemisk Selskap, Universitetet i Oslo, givet 15/10 2010....

  5. Low-Cobalt Powder-Metallurgy Superalloy

    Science.gov (United States)

    Harf, F. H.

    1986-01-01

    Highly-stressed jet-engine parts made with less cobalt. Udimet 700* (or equivalent) is common nickel-based superalloy used in hot sections of jet engines for many years. This alloy, while normally used in wrought condition, also gas-atomized into prealloyed powder-metallurgy (PM) product. Product can be consolidated by hot isostatically pressing (HIPPM condition) and formed into parts such as turbine disk. Such jet-engine disks "see" both high stresses and temperatures to 1,400 degrees F (760 degrees C).

  6. Borax as a lubricant in powder metallurgy

    Directory of Open Access Journals (Sweden)

    Héctor Geovanny Ariza-Suarez

    2014-12-01

    were compacted at 700 MPa in a uniaxial press of 15 tons. DSC-TGA analysis of the mixture with borax was realized. The specimens were sintered in a plasma reactor at 1000 for 30 minutes, with a combined atmosphere of hydrogen and argon. Microhardness and density of the sintered samples was haracterized. XRD analysis was realized to detect possible compounds formation by interaction of borax. This paper shows that borax can be used as a lubricant in powder metallurgy.

  7. Biaxially textured articles formed by powder metallurgy

    Science.gov (United States)

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

  8. Biaxially textured articles formed by power metallurgy

    Science.gov (United States)

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

  9. Preparation of nitinol by non-conventional powder metallurgy techniques

    Czech Academy of Sciences Publication Activity Database

    Novák, P.; Moravec, H.; Salvetr, P.; Průša, F.; Drahokoupil, Jan; Kopeček, Jaromír; Karlík, M.; Kubatík, Tomáš František

    2015-01-01

    Roč. 31, č. 15 (2015), s. 1886-1893 ISSN 0267-0836 R&D Projects: GA ČR(CZ) GA14-03044S Institutional support: RVO:68378271 ; RVO:61389021 Keywords : shape memory alloys * SHS process * SEM * powder metallurgy Subject RIV: JG - Metallurgy Impact factor: 1.008, year: 2015

  10. Metallurgy and Heat Treating. Welding Module 7. Instructor's Guide.

    Science.gov (United States)

    Missouri Univ., Columbia. Instructional Materials Lab.

    This guide is intended to assist vocational educators in teaching a three-unit module in metallurgy and heat treating. The module is part of a welding curriculum that has been designed to be totally integrated with Missouri's Vocational Instruction Management System. The basic principles of metallurgy and heat treatment and techniques for…

  11. Titanium surgical implants processed by powder metallurgy

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, M.V. de [INT-DMCM, Inst. Nacional de Tecnologia, Rio de Janeiro, RJ (Brazil); Pereira, L.C. [Programa de Eng. de Materiais e Metalurgica, UFRJ-COPPE (Brazil); Schwanke, C.M.; Schaeffer, L. [Centro de Tecnologia- LdTM-INT-DMCM, UFRGS, Venezuela, CEP, Rio de Janeiro, RJ (Brazil)

    2001-07-01

    Due to their low density coupled with excellent corrosion resistance and good mechanical properties, titanium and titanium alloys have been widely used for surgical implants. They have also a relatively low young's modulus, allowing a good load transfer to the bone. The elastic modulus difference between metallic implant material and bone is large, which can lead to a fracture of the implant. To solve this problem, many implants for artificial joint and dental applications have been produced by powder metallurgy routes, obtaining a porous material with an even lower young's modulus than that of the bulk titanium. This porous structure allows bone ingrowth, as the osseous tissue invade the holes of the porous material while growing and adheres to it. Besides, near net shape technologies like powder metallurgy and injection molding techniques, can reduce the components high costs due to machining final steps, also providing a fine, uniform grain structure and lack of texture and segregation. This work outlines the characteristics, properties and some of the powder routes for producing titanium surgical implants and implant porous coatings. (orig.)

  12. Promoting energy conservation in China's metallurgy industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    China is undergoing rapid industrialization and urbanization, with consequent dramatic increase in energy demand. Given energy scarcity, environmental pollution, energy security and energy cost constraints, energy conservation will be the major strategy in China's transition to a low-carbon economy. Since the metallurgy industry is a main sector of energy consumption, the efficiency of energy conservation in this industry will affect the future prospects of energy savings. This paper analyzes the energy conservation potential of China's metallurgy industry. First, seemingly unrelated regression method is applied to investigate the relationship between energy relative price, R&D input, enterprise ownership structure, enterprise scale and energy intensity of the metallurgy industry. Then, based on the SUR results, we use the scenario analysis method to predict energy consumption and savings potential in the industry in different scenarios. This paper provides references for China's government and metallurgy industry in formulating relevant energy conservation policies. - Highlights: • Seemingly unrelated regression method is applied to analyze the energy intensity of metallurgy industry. • We use the scenario analysis method to predict energy consuming and energy saving of Chinese metallurgy industry. • Provide references for China's government and metallurgy industry in formulating relevant energy conservation policies.

  13. Adaptation illustrations: Chapter 4

    Science.gov (United States)

    Maria Janowiak; Patricia Butler; Chris Swanston; Matt St. Pierre; Linda. Parker

    2012-01-01

    In this chapter, we demonstrate how the Adaptation Workbook (Chapter 3) can be used with the Adaptation Strategies and Approaches (Chapter 2) to develop adaptation tactics for two real-world management issues. The two illustrations in this chapter are intended to provide helpful tips to managers completing the Adaptation Workbook, as well as to show how the anticipated...

  14. Lecture notes on diophantine analysis

    CERN Document Server

    Zannier, Umberto

    2014-01-01

    These lecture notes originate from a course delivered at the Scuola Normale in Pisa in 2006. Generally speaking, the prerequisites do not go beyond basic mathematical material and are accessible to many undergraduates. The contents mainly concern diophantine problems on affine curves, in practice describing the integer solutions of equations in two variables. This case historically suggested some major ideas for more general problems. Starting with linear and quadratic equations, the important connections with Diophantine Approximation are presented and Thue's celebrated results are proved in full detail. In later chapters more modern issues on heights of algebraic points are dealt with, and applied to a sharp quantitative treatment of the unit equation. The book also contains several Supplements, hinted exercises and an Appendix on recent work on heights.

  15. Biennial activity report of Metallurgy Division for 1989 and 1990

    International Nuclear Information System (INIS)

    Kamachi Mudali, U.; Muraleedharan, P.; Parameswaran, P.; Swaminathan, K.; Sreedharan, O.M.

    1993-01-01

    This is the first divisional biennial report of the Metallurgy Division of Indira Gandhi Centre for Atomic Research, for the year 1989-1990, after formation of the Metallurgy Division in September 1988. Major areas of work in the Division relate to aqueous corrosion and localised corrosion, stress corrosion cracking and liquid metal corrosion, high temperature oxidation, thermodynamic studies, physical metallurgy studies for structure-property correlations and failure analyses. The principal materials of studies have been the austenitic stainless steels, the current materials of construction in the Fast Breeder Test Reactor and the candidate materials for the Prototype Fast Breeder Reactor

  16. Chemistry and metallurgy in the Portuguese Empire

    Energy Technology Data Exchange (ETDEWEB)

    Habashi, F. [Laval Univ., Sainte-Foy, Quebec City, PQ (Canada)

    2000-10-01

    The foundation and expansion of the Portuguese Empire is sketched, with emphasis on the development of a new type of ship by Prince Henrique the Navigator (AD 1385-1460), known as the caravel. By virtue of its advanced design, it was capable of sailing the stormy seas at high speeds, and thereby was instrumental in extending Portuguese influence over vast territories in South America, Asia and Africa, extending Portuguese know-how in mining, metallurgy, chemistry and trade along with Christianity. The role played by the University of Coimbra, founded in 1306, and the contribution of the Brazilian Geological Survey, established in 1875, and of the School of Mines in Ouro Preto in Brazil in 1876, in the exploitation of the mineral wealth of the Portuguese colonies is chronicled.

  17. Academic Training Lecture - Regular lecture programme

    CERN Multimedia

    PH Department

    2011-01-01

    Wednesday 28, Thursday 29 and Friday 30 September 2011 Supersymmetric Recipes by Prof. Ben Allanech / University of Cambridge, UK  from 11:00 to 12:00 (Europe/Zurich) at CERN ( Main Auditorium, Bldg. 500 ) In these lectures, I shall describe the theory of supersymmetry accessible to people with a knowledge of basic quantum field theory. The lectures will contain recipes of how to calculate which interactions (and which special relations) are in supersymmetry, without providing detailed proofs of where they come from. We shall also cover: motivation for weak-scale supersymmetry and the minimal supersymmetric standard model.

  18. Summary of lectures

    Indian Academy of Sciences (India)

    Madhu Sudan

    Jubilee Professor of the Indian Academy of Sciences. Lectures in the visit varied from in‐depth expositions of current areas of research aimed at experts in the field to public lectures exposing the role of Mathematics in applied fields such as Computer Science and Communication. The visit also coincided with the 100th ...

  19. Learning in lectures

    OpenAIRE

    2005-01-01

    Abstract Many educational development resources recommend making conventional lectures more interactive. However, there is little firm evidence supporting either the acceptability (to students) or efficacy of doing so. This research examined the use of short `interactive windows? (discussions and problem-solving exercises) in first year evolution lectures delivered to between 73 and 126 students ...

  20. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel 73127

    2001-01-01

    28, 29, 30, 31 May and 1 June REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 Quantum computing and Quantum cryptography T. Hey / University of Southampton, GB, and D. Ross / CERN-TH This course will give both an overview and a detailed introduction to quantum computing and quantum cryptography. The first lecture will survey the field, starting from its origins in Feyman's lecture in 1981. The next three lectures will explain in detail the relevance of Bell states and the workings of Grover's Quantum Search and Shor's quantum factorization algorithms. In addition, an explanation of quantum teleportation will be given. The last lecture will survey the recent progress towards realizing working quantum computers and quantum cryptographic systems.

  1. Thermogravimetric control of intermediate compounds in uranium metallurgy

    International Nuclear Information System (INIS)

    Gasco Sanchez, L.; Fernandez Cellini, R.

    1959-01-01

    The thermal decomposition of some intermediate compounds in the metallurgy of the uranium as uranium peroxide, ammonium uranate, uranium and ammonium penta-fluoride, uranium tetrafluoride and uranous oxide has been study by means of the Chevenard's thermo balance. Some data on pyrolysis of synthetic mixtures of intermediate compounds which may occasionally appear during the industrial process, are given. Thermogravimetric methods of control are suggested, usable in interesting products in the uranium metallurgy. (Author) 20 refs

  2. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    12, 13, 14, 15 & 16 March REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 Telecommunication for the future Rob Parker / CERN-IT Few fields have experienced such a high level of technical advance over the last few decades as that of telecommunications. This lecture series will track the evolution of telecommunications systems since their inception, and consider how technology is likely to advance over the next years. A personal view will also be given of the effect of these innovations on our work and leisure activities.The lecture series will be aimed at an audience with no specific technical knowledge of telecommunications.

  3. Chapter 10: Management recommendations

    Science.gov (United States)

    Deborah M. Finch; Janie Agyagos; Tracy McCarthey; Robert M. Marshall; Scott H. Stoleson; Mary J. Whitfield

    2000-01-01

    This chapter was developed over a series of meetings using a group-consensus process. Our recommendations are based on published results, on information compiled in the previous chapters, on expert opinion, and on unpublished data of conservation team members. This chapter is available as temporary guidance until the Recovery Plan for the southwestern willow flycatcher...

  4. Lectures on Dispersion Theory

    Science.gov (United States)

    Salam, A.

    1956-04-01

    Lectures with mathematical analysis are given on Dispersion Theory and Causality and Dispersion Relations for Pion-nucleon Scattering. The appendix includes the S-matrix in terms of Heisenberg Operators. (F. S.)

  5. Feynman Lectures on Computation

    CERN Document Server

    Feynman, Richard Phillips; Allen, Robin W

    1999-01-01

    "When, in 1984-86, Richard P. Feynman gave his famous course on computation at the California Institute of Technology, he asked Tony Hey to adapt his lecture notes into a book. Although led by Feynman,"

  6. The metallurgy of superalloys part 2

    International Nuclear Information System (INIS)

    Abdelazim, M.E.; Hammad, F.H.

    1990-01-01

    This is part II of the report titled 'the metallurgy of superalloys'. It deals with the effect of heat treatment and operating conditions (thermal exposure and environment) on the mechanical properties of superalloys. The heat treatment is important in the development of superalloys through that it controls type, amount, size shape and distribution of the precipitate and the grain size of the matrix. The thermal exposure leads to reduction in the amount of the primary carbides and to precipitation of secondary carbides. Also it leads to the agglomeration and coarsening of gamma or the transformation of gamma phase to phase. The environment may lead to the internal oxidation, carburization, decarburization or sulphidization of the superalloys which may result in the degradation of their mechanical properties. This part gives also an example of applications of superalloys in the field of nuclear reactors especially high temperature-gas cooled reactors. Joined with this part a table which contains the major superalloys including its chemical analysis, creep rupture strength and some of its applications. 1 tab

  7. A major advance in powder metallurgy

    Science.gov (United States)

    Williams, Brian E.; Stiglich, Jacob J., Jr.; Kaplan, Richard B.; Tuffias, Robert H.

    1991-01-01

    Ultramet has developed a process which promises to significantly increase the mechanical properties of powder metallurgy (PM) parts. Current PM technology uses mixed powders of various constituents prior to compaction. The homogeneity and flaw distribution in PM parts depends on the uniformity of mixing and the maintenance of uniformity during compaction. Conventional PM fabrication processes typically result in non-uniform distribution of the matrix, flaw generation due to particle-particle contact when one of the constituents is a brittle material, and grain growth caused by high temperature, long duration compaction processes. Additionally, a significant amount of matrix material is usually necessary to fill voids and create 100 percent dense parts. In Ultramet's process, each individual particle is coated with the matrix material, and compaction is performed by solid state processing. In this program, Ultramet coated 12-micron tungsten particles with approximately 5 wt percent nickel/iron. After compaction, flexure strengths were measured 50 percent higher than those achieved in conventional liquid phase sintered parts (10 wt percent Ni/Fe). Further results and other material combinations are discussed.

  8. A Geminoid as Lecturer

    DEFF Research Database (Denmark)

    Abildgaard, Julie Rafn; Schärfe, Henrik

    2012-01-01

    In this paper we report our findings from an experiment with the teleoperated android Geminoid-DK. The geminoid took up the role of a university lecturer and delivered a 45 minute lecture in front of 150 freshmen students at Aalborg University. While considering the role of the geminoid in this e...... in this educational context, we report results relating to large-room teaching, as well as gender differences in the perception of the robot....

  9. Interactive lectures in engineering education

    NARCIS (Netherlands)

    van Dijk, L.A.; van den Berg, G.C.; van Keulen, H.

    2001-01-01

    This article discusses an alternative approach to lecturing: the interactive lecture. In the literature, interactive teaching is forwarded as a means to increase the effectiveness of lectures. Members of lecturing staff still seem, however, reluctant to incorporate interactive teaching in their

  10. Copper alloys with improved properties: standard ingot metallurgy vs. powder metallurgy

    Directory of Open Access Journals (Sweden)

    Milan T. Jovanović

    2014-09-01

    Full Text Available Three copper-based alloys: two composites reinforced with Al2O3 particles and processed through powder metallurgy (P/M route, i.e. by internal oxidation (Cu-2.5Al composite and by mechanical alloying (Cu-4.7Al2O3 and Cu-0.4Cr-0.08Zr alloy produced by ingot metallurgy (vacuum melting and casting were the object of this investigation. Light microscope and scanning electron microscope (SEM equipped with electron X-ray spectrometer (EDS were used for microstructural characterization. Microhardness and electrical conductivity were also measured. Compared to composite materials, Cu-0.4Cr-0.08Zr alloy possesses highest electrical conductivity in the range from 20 to 800 ℃, whereas the lowest conductivity shows composite Cu-2.5Al processed by internal oxidation. In spite to somewhat lower electrical conductivity (probably due to inadequate density, Cu-2.5Al composite exhibits thermal stability enabling its application at much higher temperatures than materials processed by mechanical alloying or by vacuum melting and casting.

  11. Lectures series in computational fluid dynamics

    International Nuclear Information System (INIS)

    Thompson, K.W.

    1987-08-01

    The lecture notes cover the basic principles of computational fluid dynamics (CFD). They are oriented more toward practical applications than theory, and are intended to serve as a unified source for basic material in the CFD field as well as an introduction to more specialized topics in artificial viscosity and boundary conditions. Each chapter in the text is associated with a videotaped lecture. The basic properties of conservation laws, wave equations, and shock waves are described. The duality of the conservation law and wave representations is investigated, and shock waves are examined in some detail. Finite difference techniques are introduced for the solution of wave equations and conservation laws. Stability analysis for finite difference approximations are presented. A consistent description of artificial viscosity methods are provided. Finally, the problem of nonreflecting boundary conditions are treated

  12. Lecture notes on: Electrical theory behind the measurement of body fluids with bioimpedance spectroscopy (BIS)

    DEFF Research Database (Denmark)

    Jødal, Lars

    The lecture notes describe how body fluid volumes can be measured/estimated using the technique bio-impedance spectroscopy (BIS). The opening chapters assume little or none technical/mathematical knowledge and can hopefully be read by anyone interested in the techneque. Later chapters become more...

  13. 78 FR 8202 - Meeting of the Joint ACRS Subcommittees on Thermal Hydraulic Phenomena and Materials, Metallurgy...

    Science.gov (United States)

    2013-02-05

    ... Hydraulic Phenomena and Materials, Metallurgy and Reactor Fuels; Notice of Meeting The Joint ACRS Subcommittees on Thermal Hydraulic Phenomena and Materials, Metallurgy and Reactor Fuels will hold a meeting on...

  14. The Metallurgy of some indian swords

    Directory of Open Access Journals (Sweden)

    Williams, Alan

    2007-12-01

    Full Text Available The metallurgy of Indian swords shows many differences from that of European swords. The distinction between "Damascus Steel" (or wootz and crucible steel is explained. Ten broken blades from the Armoury of the Nizams of Hyderabad were made available for microscopic examination. Six of these seem to been made from crucible steels, and are of notably high quality. By contrast, a group of six randomly collected from Private Collections in England were also examined. Only one of these was made of crucible steel, and three of the others were of very mediocre quality. This perhaps represents the quality of blades available to the average Indian soldier.

    La metalurgia de las espadas indias presenta notables diferencias en comparación con la de las europeas. Se explica la distinción entre el ‘acero de Damasco’ (o wootz y el acero de crisol. Se ha realizado un análisis microscópico de un conjunto de diez hojas rotas de espada depositadas en la Armería de los Nizams de Hyderabad. Seis de ellas parecen haber sido realizadas a partir de acero de crisol, y son de elevada calidad. En contraste, se examinó también un grupo de seis espadas de colecciones privadas en Inglaterra. Sólo una de ellas estaba fabricada con acero de crisol, y tres de las otras eran de calidad muy mediocre. Esto representa quizá la calidad de las hojas de espada al alcance del soldado medio indio.

  15. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    ACADEMIC TRAINING LECTURE 1, 2, 3, 4 and 5 October LECTURES FOR POSTGRADUATE STUDENTS From 10:00 hrs - Main Auditorium bldg. 500 1 Introduction to particle accelerators E.J.N. Wilson / CERN-AC , Head of the CERN Accelerator School This new series of lectures is intended for anyone with a technical or scientific background who would like to become familiar with the principles of accelerator design. It is a complement to last year's course and includes new lectures on present day accelerators, and their applications as well as colliders and neutrino factories. Beam dynamics, which was treated at length in last year's course, has been compressed into one lecture, intended as revision for those who followed earlier courses and an introduction for newcomers to the field. The course should not be missed by those who will attend the CAS Intermediate Accelerator School in Seville. 1-10 10:00 Present-day Accelerators 11:00 - Beam Dynamics 2-10 10:00 Accelerating Cavities 11:00 - Non-linear Dynamics 3-10 10:00 E...

  16. Biennial activity report of Metallurgy Programme - 1985 and 1986

    International Nuclear Information System (INIS)

    Mallika, C.; Sreenivasan, P.R.; Muraleedharan, P.; Shyamsunder, M.T.; Kuppuswami, P.; Sampath, N.; Bhaduri, A.K.; Sreedharan, O.M.

    1988-01-01

    The biennial activity report of the Metallurgy Programme of the Indira Gandhi Centre for Atomic Research covers the period of the years 1985 and 1986. Along with NDT, welding metallurgy, low cycle fatigue, creep and creep fatigue interactions, structure-property correlations, thermodynamics and corrosion metallurgy of alloy steels with respect to their compatibility with aqueous and liquid sodium environments continue to be the major thrust areas of the Programme. Some of the basic research contributions of the Programme are: the observation of uniform and homogeneous distribution of voids in cyclically deformed 304 SS, the role of grain boundaries and precipitation in dynamic strain ageing of 316 SS and the determination of the activities of component metals in 316 and 304 SS by metastable EMF method. (author)

  17. Introduction to powder metallurgy processes for titanium manufacturing

    International Nuclear Information System (INIS)

    Esteban, P. G.; Bolzoni, L.; Ruiz-Navas, E. M.; Gordo, E.

    2011-01-01

    The development of new extraction processes to produce titanium in powder form leads Powder Metallurgy to an advantage position among the manufacturing processes for titanium. The cost reduction of base material, coupled with the economy of the powder metallurgy processes, give titanium industry the chance to diversify its products, which could lead to production volumes able to stabilise the price of the metal. This work reviews some of the Powder Metallurgy techniques for the manufacturing of titanium parts, and describes the two typical approaches for titanium manufacturing: Blending Elemental and Prealloyed Powders. Among others, conventional pressing and sintering are described, which are compared with cold and hot isostatic pressing techniques. Real and potential applications are described. (Author) 71 refs.

  18. Albert Einstein memorial lectures

    CERN Document Server

    Mechoulam, Raphael; The Israel Academy for Sciences and Humanities

    2012-01-01

    This volume consists of a selection of the Albert Einstein Memorial Lectures presented annually at the Israel Academy of Sciences and Humanities. Delivered by eminent scientists and scholars, including Nobel laureates, they cover a broad spectrum of subjects in physics, chemistry, life science, mathematics, historiography and social issues. This distinguished memorial lecture series was inaugurated by the Israel Academy of Sciences and Humanities following an international symposium held in Jerusalem in March 1979 to commemorate the centenary of Albert Einstein's birth. Considering that Einstein's interests, activities and influence were not restricted to theoretical physics but spanned broad fields affecting society and the welfare of humankind, it was felt that these memorial lectures should be addressed to scientists, scholars and erudite laypersons rather than to physicists alone.

  19. Are radiography lecturers, leaders?

    International Nuclear Information System (INIS)

    Hendry, Julie Anne

    2013-01-01

    This review article aims to explore the concept of radiography lecturers acting as leaders to their student followers. Through a brief review of the literature, a definition of leadership is suggested and some leadership theories explored. The path-goal theory, leader–member exchange theory and the contemporary theory of transformational leadership are examined more closely. Links between lecturer-leader behaviour and student motivation and learning are tentatively suggested with transformational leadership appearing to offer the optimal leadership style for lecturers to adopt. The paucity of literature relating directly to radiography is acknowledged and areas for further research are suggested. The article concludes with some of the author's practical ideas for incorporating transformational leadership styles and behaviours into radiography education today

  20. Lectures on functor homology

    CERN Document Server

    Touzé, Antoine

    2015-01-01

    This book features a series of lectures that explores three different fields in which functor homology (short for homological algebra in functor categories) has recently played a significant role. For each of these applications, the functor viewpoint provides both essential insights and new methods for tackling difficult mathematical problems. In the lectures by Aurélien Djament, polynomial functors appear as coefficients in the homology of infinite families of classical groups, e.g. general linear groups or symplectic groups, and their stabilization. Djament’s theorem states that this stable homology can be computed using only the homology with trivial coefficients and the manageable functor homology. The series includes an intriguing development of Scorichenko’s unpublished results. The lectures by Wilberd van der Kallen lead to the solution of the general cohomological finite generation problem, extending Hilbert’s fourteenth problem and its solution to the context of cohomology. The focus here is o...

  1. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  2. Summarizing of new techniques in uranium mining and metallurgy

    International Nuclear Information System (INIS)

    Wang Delin; Zhang Fei; Su Yanru; Zeng Yijun; Meng Jin

    2010-01-01

    According to character of national resources and uranium mining and metallurgical science and technology members research achievements, new techniques in ten scientific research area of in-situ leaching, heap leaching, multi-metal comprehensive recovery, bio-metallurgy etc. for 10 years is introduced in this paper. The level of innovation ability is shown by technical index, resources recovery and reduction capital cost etc. datum. The application bound of natural uranium resource is enlarged and production ability of national uranium is increased. It is put forward renovation and development ideas for uranium mining and metallurgy. (authors)

  3. Metallurgy and properties of plasma spray formed materials

    Science.gov (United States)

    Mckechnie, T. N.; Liaw, Y. K.; Zimmerman, F. R.; Poorman, R. M.

    1992-01-01

    Understanding the fundamental metallurgy of vacuum plasma spray formed materials is the key to enhancing and developing full material properties. Investigations have shown that the microstructure of plasma sprayed materials must evolve from a powder splat morphology to a recrystallized grain structure to assure high strength and ductility. A fully, or near fully, dense material that exhibits a powder splat morphology will perform as a brittle material compared to a recrystallized grain structure for the same amount of porosity. Metallurgy and material properties of nickel, iron, and copper base alloys will be presented and correlated to microstructure.

  4. Lectures in general algebra

    CERN Document Server

    Kurosh, A G; Stark, M; Ulam, S

    1965-01-01

    Lectures in General Algebra is a translation from the Russian and is based on lectures on specialized courses in general algebra at Moscow University. The book starts with the basics of algebra. The text briefly describes the theory of sets, binary relations, equivalence relations, partial ordering, minimum condition, and theorems equivalent to the axiom of choice. The text gives the definition of binary algebraic operation and the concepts of groups, groupoids, and semigroups. The book examines the parallelism between the theory of groups and the theory of rings; such examinations show the

  5. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    26, 27, 28 February and 1, 2 March REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 Recent Results on CP Violation and B Physics P.F. HARRISON / QMW, London, UK With the advent of the asymmetric B factories in Japan and the US, exciting new results on CP Violation and B Physics are starting to be achieved. In these lectures, we review the existing experimental and phenomenological context of these measurements, we compare and contrast the new experimental facilities and discuss the implications of the recent results on our understanding. Finally we summarise the prospects for future developments.

  6. Academic Training Lecture - Regular Programme

    CERN Multimedia

    PH Department

    2011-01-01

    Regular Lecture Programme 9 May 2011 ACT Lectures on Detectors - Inner Tracking Detectors by Pippa Wells (CERN) 10 May 2011 ACT Lectures on Detectors - Calorimeters (2/5) by Philippe Bloch (CERN) 11 May 2011 ACT Lectures on Detectors - Muon systems (3/5) by Kerstin Hoepfner (RWTH Aachen) 12 May 2011 ACT Lectures on Detectors - Particle Identification and Forward Detectors by Peter Krizan (University of Ljubljana and J. Stefan Institute, Ljubljana, Slovenia) 13 May 2011 ACT Lectures on Detectors - Trigger and Data Acquisition (5/5) by Dr. Brian Petersen (CERN) from 11:00 to 12:00 at CERN ( Bldg. 222-R-001 - Filtration Plant )

  7. Memory for Lectures: How Lecture Format Impacts the Learning Experience

    Science.gov (United States)

    Varao-Sousa, Trish L.; Kingstone, Alan

    2015-01-01

    The present study investigated what impact the presentation style of a classroom lecture has on memory, mind wandering, and the subjective factors of interest and motivation. We examined if having a professor lecturing live versus on video alters the learning experience of the students in the classroom. During the lectures, students were asked to report mind wandering and later complete a memory test. The lecture format was manipulated such that all the students received two lectures, one live and one a pre-recorded video. Results indicate that lecture format affected memory performance but not mind wandering, with enhanced memory in the live lectures. Additionally, students reported greater interest and motivation in the live lectures. Given that a single change to the classroom environment, professor presence, impacted memory performance, as well as motivation and interest, the present results have several key implications for technology-based integrations into higher education classrooms. PMID:26561235

  8. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    1, 2, 3, 4 and 5 October LECTURES FOR POSTGRADUATE STUDENTS From 10:00 hrs - Main Auditorium bldg. 500 1 Introduction to particle accelerators E.J.N. Wilson / CERN-AC , Head of the CERN Accelerator School This new series of lectures is intended for anyone with a technical or scientific background who would like to become familiar with the principles of accelerator design. It is a complement to last year's course and includes new lectures on present day accelerators, and their applications as well as colliders and neutrino factories. Beam dynamics, which was treated at length in last year's course, has been compressed into one lecture, intended as revision for those who followed earlier courses and an introduction for newcomers to the field. The course should not be missed by those who will attend the CAS Intermediate Accelerator School in Seville. 1-10 10:00 Present-day Accelerators 11:00 - Beam Dynamics 2-10 10:00 Accelerating Cavities 11:00 - Non-linear Dynamics 3-10 10:00 Electron Dynamics 11:00 - ...

  9. Organic Lecture Demonstrations.

    Science.gov (United States)

    Silversmith, Ernest F.

    1988-01-01

    Provides a listing of 35 demonstrations designed to generate interest in organic chemistry and help put points across. Topics include opening lecture; molecular structure and properties; halogenation; nucleophilic substitution, alkenes and dienes, stereochemistry, spectroscopy, alcohols and phenols, aldehydes and ketones; carboxylic acids, amines,…

  10. Impostor Syndrome 2014 lecture

    OpenAIRE

    Drew, Joshua

    2014-01-01

    A lecture given at the University of Rochester outlining what the Impostor Syndrome is, as well as how it can impact graduate student success. Other topics include how to build support networks in school as well as picking appropriately scaled projects

  11. Mendeleev's Faraday Lecture

    Indian Academy of Sciences (India)

    The Periodic Classification of the Chemical Elements. [The prestigious Faraday Lecturership and the associated Faraday Medal were conferred upon Mendeleev in 1889 by the Chemical Society of Great Britain. The lecture was delivered before the Fellows of the Chemical Society in the theatre of the Royal Institu-.

  12. Feynman's Lost Lecture

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 5. Feynman's Lost Lecture - The Motion of the Planets Around the Sun. Shailesh A Shirali. Book Review Volume 3 Issue 5 May 1998 pp 78-80. Fulltext. Click here to view fulltext PDF. Permanent link:

  13. Participatory Lecture Demonstrations.

    Science.gov (United States)

    Battino, Rubin

    1979-01-01

    The use of participatory lecture demonstrations in the classroom is described. Examples are given for the following topics: chromatography, chemical kinetics, balancing equations, the gas laws, kinetic molecular theory, Henry's law of gas solubility, electronic energy levels in atoms, and translational, vibrational, and rotational energies of…

  14. Lecturer on tour!

    Science.gov (United States)

    1998-11-01

    Readers may recall the interview with Professor Peter Kalmus which appeared in the July issue of Physics Education and which indicated his latest role of lecturer for the 1998-9 Institute of Physics Schools and Colleges Lecture series. This year's lecture is entitled `Particles and the universe' and the tour was due to begin in St Andrews, Scotland, late in September. Professor Kalmus will be looking at various aspects of particle physics, quantum physics and relativity, and discussing how they reveal the secrets of the beginning of our universe. His own experience of working at CERN, the European centre for particle physics in Switzerland, as well as at other international research facilities will provide a unique insight into activity in one of the most exciting areas of physics. The talks are aimed at the 16-19 age group but members of the public are also welcome to attend. They will act as an opportunity to gain a sneak preview of the dynamic new topics that will soon feature in the A-level syllabus arising from the Institute's 16-19 project. Further details of attendance are available from the local organizers, a list of whom may be obtained from Catherine Wilson in the Education Department at the Institute of Physics, 76 Portland Place, London W1N 3DH (tel: 0171 470 4800, fax: 0171 470 4848). The published schedule (as of September) for the lecture series consists of the following: Dates

  15. Summer Student Lecture Programme

    CERN Document Server

    2004-01-01

    Main Auditorium, bldg. 500 DATE TIME LECTURER TITLE Monday 2 August 09:15 - 10:00 P. Wells (CERN) The Higgs Saga at LEP 10:15 - 11:00 G. Cowan (Univ. of London) Introduction to Statistics (2/3) 11:15 - 12:00 G. Cowan (Univ. of London) Introduction to Statistics (3/3) DATE TIME LECTURER TITLE Tuesday 3 August 09:15 - 10:00 P. Sphicas (CERN) Trigger and Data Acquisition Systems (1/2) 10:15 - 11:00 R. Jacobsen (LBLN) From Raw Data to Physics Results (1/2) 11:15 - 12:00 R. Jacobsen (LBLN) G. Cowan (University of London) Discussion Session DATE TIME LECTURER TITLE Wednesday 4 August 09:15 - 10:00 P. Sphicas (CERN) Trigger and Data Acquisition Systems (2/2) 10:15 - 11:00 R. Jacobsen (LBLN) From Raw Data to Physics Results (2/2) 11:15 - 12:00 N. Palanque-Delabrouille (CEA) Astroparticle Physics (1/3) DATE TIME LECTURER TITLE Thursday 5 August 09:15 - 10:00 N. Palanque-Delabrouille (CEA) Astroparticle Physics (2/3) 10:15 - 11:00 N. Palanque-Delabrouille (CEA) A...

  16. Public Lecture: Human Space Exploration

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Should you wish to attend to this lecture only (and not the full colloquium), please register here: https://indico.cern.ch/event/386996/registration/ Participants to the full colloquium are automatically registered to the public lectures.

  17. Khan's lectures handbook of the physics of radiation therapy

    CERN Document Server

    Khan, Faiz M; Mihailidis, Dimitris

    2011-01-01

    Khan's Lectures: Handbook of the Physics of Radiation Therapy will provide a digest of the material contained in The Physics of Radiation Therapy. Lectures will be presented somewhat similar to a PowerPoint format, discussing key points of individual chapters. Selected diagrams from the textbook will be used to initiate the discussion. New illustrations will used, wherever needed, to enhance the understanding of important concepts. Discussion will be condensed and often bulleted. Theoretical details will be referred to the textbook and the cited literature. A problem set (practice questions) w

  18. The effect of powder metallurgy process parameters on mechanical ...

    African Journals Online (AJOL)

    The ever-increasing development of applying the iron pieces made by powder metallurgy in car industries and other usages depends on making pieces with high density and consequently acceptable physical and mechanical properties. Regarding the effect of decrease in the powder bits' size on improvement of the ...

  19. Chemical and Metallurgy Research (CMR) Sample Tracking System Design Document

    International Nuclear Information System (INIS)

    Bargelski, C. J.; Berrett, D. E.

    1998-01-01

    The purpose of this document is to describe the system architecture of the Chemical and Metallurgy Research (CMR) Sample Tracking System at Los Alamos National Laboratory. During the course of the document observations are made concerning the objectives, constraints and limitations, technical approaches, and the technical deliverables

  20. Damage on 316LN stainless steel transformed by powder metallurgy

    International Nuclear Information System (INIS)

    Couturier, R.; Burlet, H.

    1998-01-01

    This study deals with the 316 LN stainless steel elaboration by powder metallurgy. This method allows the realization of structures in austenitic steel less affected by the thermal aging than the cast austenitic-ferritic components. The components are performed by the method of HIP (Hot Isostatic Pressing). Mechanical tests are provided to control mechanical properties

  1. Iron Metallurgy: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 7.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to iron metallurgy. Various aspects of iron production are described in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  2. [Hygienic evaluation of risk factors on powder metallurgy production].

    Science.gov (United States)

    2011-01-01

    Complex hygienic, clinical, sociologic and epidemiologic studies revealed reliable relationship between work conditions and arterial hypertension, locomotory system disorders, monocytosis in powder metallurgy production workers. Findings are more probable cardiovascular and respiratory diseases, digestive tract diseases due to influence of lifestyle factors.

  3. Feynman Lectures on Gravitation

    International Nuclear Information System (INIS)

    Borcherds, P

    2003-01-01

    In the early 1960s Feynman lectured to physics undergraduates and, with the assistance of his colleagues Leighton and Sands, produced the three-volume classic Feynman Lectures in Physics. These lectures were delivered in the mornings. In the afternoons Feynman was giving postgraduate lectures on gravitation. This book is based on notes compiled by two students on that course: Morinigo and Wagner. Their notes were checked and approved by Feynman and were available at Caltech. They have now been edited by Brian Hatfield and made more widely available. The book has a substantial preface by John Preskill and Kip Thorne, and an introduction entitled 'Quantum Gravity' by Brian Hatfield. You should read these before going on to the lectures themselves. Preskill and Thorne identify three categories of potential readers of this book. 1. Those with a postgraduate training in theoretical physics. 2. 'Readers with a solid undergraduate training in physics'. 3. 'Admirers of Feynman who do not have a strong physics background'. The title of the book is perhaps misleading: readers in category 2 who think that this book is an extension of the Feynman Lectures in Physics may be disappointed. It is not: it is a book aimed mainly at those in category 1. If you want to get to grips with gravitation (and general relativity) then you need to read an introductory text first e.g. General Relativity by I R Kenyon (Oxford: Oxford University Press) or A Unified Grand Tour of Theoretical Physics by Ian D Lawrie (Bristol: IoP). But there is no Royal Road. As pointed out in the preface and in the introduction, the book represents Feynman's thinking about gravitation some 40 years ago: the lecture course was part of his attempts to understand the subject himself, and for readers in all three categories it is this that makes the book one of interest: the opportunity to observe how a great physicist attempts to tackle some of the hardest challenges of physics. However, the book was written 40

  4. [Encouraging experiences of interactive lectures].

    Science.gov (United States)

    Lehtonen, Sanna; Linden, Anni-Maija; Ojala, Päivi M; Polvi, Anne; Sallinen, Ville; Viranta, Suvi

    2009-01-01

    Traditional lectures typically represent unidirectional transfer of information from teacher to students whilst interactive lectures involve student activity. We analyzed the experiences of students and teachers of interactive lectures by observation and questionnaires during a course organized by Helsinki Biomedical Graduate School. Teachers and the majority of students found interactive lectures highly motivating although we observed that only a fraction of students participated in discussions. Students were of the opinion that interactivity improved their learning. Supplementing lectures with interactive elements encourages students to adopt active learning techniques.

  5. Lecture 2: Software Security

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture addresses the following question: how to create secure software? The lecture starts with a definition of computer security and an explanation of why it is so difficult to achieve. It then introduces the main security principles (like least-privilege, or defense-in-depth) and discusses security in different phases of the software development cycle. The emphasis is put on the implementation part: most common pitfalls and security bugs are listed, followed by advice on best practice for security development, testing and deployment. Sebastian Lopienski is CERN’s deputy Computer Security Officer. He works on security strategy and policies; offers internal consultancy and audit services; develops and ...

  6. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    23, 24, 25, 26 and 27 April REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500, on 23 April from 11:15 to 12:15 hrs Searches for Dark Matter F. Feinstein / CPPM, Marseille, F The fact that the mass of the visible stars could not account for the gravitational cohesion of the galaxy clusters was the first manifestation of non-radiating matter in the Universe. Since then, many observations imply that most of the matter is indeed dark. Its nature is still unknown and likely to have several contributions. Recent results indicate that most of it may not be composed of normal matter. These lectures will review the experimental methods, which have been developed to unravel this 70-year long mystery and confront their results with the current theoretical framework of cosmology.

  7. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Françoise Benz

    2002-01-01

    18, 19, 20, 21, 22 November LECTURE FOR POSTGRADUATE STUDENTS From 11:00 hrs - Main Auditorium bldg. 500 Telling the Truth with Statistics R. Barlow / Univ. of Manchester, UK This course of lectures will cover probability, distributions, fitting, errors and confidence levels, for practising High Energy Physicists who need to use Statistical techniques to express their results. Concentrating on these appropriate specialist techniques means that they can be covered in appropriate depth, while assuming only the knowledge and experience of a typical Particle Physicist. The different definitions of probability will be explained, and it will be appear why this basic subject is so controversial; there are several viewpoints and it is important to understand them all, rather than abusing the adherents of different beliefs. Distributions will be covered: the situations they arise in, their useful properties, and the amazing result of the Central Limit Theorem. Fitting a parametrisation to a set of data is one of the m...

  8. Lectures on radiation protection

    International Nuclear Information System (INIS)

    Wachsmann, F.; Consentius, K.

    1981-01-01

    All important subjects of radiation protection are presented in concise form; the explanations may serve as lecture manuscripts. The lectures are divided into 16 to 19 teaching units. Each teaching unit is supplemented by a slide to be projected on a screen while the text is read. This method of visual teaching has already been tried with good results in medicine and medical engineering. Pictures of the slides are given in the text so that the book may also be used for self-studies. The main facts are summarized at the end of each lesson. The finished book will consist of 8 lessons; the first three of these discuss 1. Radiation effects and hazards 2. Dose definitions and units and their role in radiology and radiation protection 3. Dose limits and legal specifications. (orig.) [de

  9. Globe: Lecture series

    CERN Multimedia

    2007-01-01

    The LHC: an accelerator of science This series of lectures is all about understanding the scientific and technological challenges of the phenomenal LHC project and assessing its innovations through their everyday applications. Come and take a sneak preview of the LHC! Communicate: the Grid, a computer of global dimensions François Grey, head of communication in CERN’s Information Technology Department How will it be possible for the 15 million billion bytes of data generated by the LHC every year to be handled and stored by a computer that doesn’t have to be the size of a skyscraper? The computer scientists have the answer: the Grid, which will harness the power of tens of thousands of computers all over the world by creating a network of computers and making them operate as one. >>> Lectures are free and require no specialist knowledge. In french. 
 >>> By reservation only: tel. +41 (0)22 767 76 76

  10. Lectures on dark matter

    International Nuclear Information System (INIS)

    Seljak, U.

    2001-01-01

    These lectures concentrate on evolution and generation of dark matter perturbations. The purpose of the lectures is to present, in a systematic way, a comprehensive review of the cosmological parameters that can lead to observable effects in the dark matter clustering properties. We begin by reviewing the relativistic linear perturbation theory formalism. We discuss the gauge issue and derive Einstein's and continuity equations for several popular gauge choices. We continue by developing fluid equations for cold dark matter and baryons and Boltzmann equations for photons, massive and massless neutrinos. We then discuss the generation of initial perturbations by the process of inflation and the parameters of that process that can be extracted from the observations. Finally we discuss evolution of perturbations in various regimes and the imprint of the evolution on the dark matter power spectrum both in the linear and in the nonlinear regime. (author)

  11. Lectures on Quantum Gravity

    CERN Document Server

    Gomberoff, Andres

    2006-01-01

    The 2002 Pan-American Advanced Studies Institute School on Quantum Gravity was held at the Centro de Estudios Cientificos (CECS),Valdivia, Chile, January 4-14, 2002. The school featured lectures by ten speakers, and was attended by nearly 70 students from over 14 countries. A primary goal was to foster interaction and communication between participants from different cultures, both in the layman’s sense of the term and in terms of approaches to quantum gravity. We hope that the links formed by students and the school will persist throughout their professional lives, continuing to promote interaction and the essential exchange of ideas that drives research forward. This volume contains improved and updated versions of the lectures given at the School. It has been prepared both as a reminder for the participants, and so that these pedagogical introductions can be made available to others who were unable to attend. We expect them to serve students of all ages well.

  12. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  13. Chapter 9: Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Algora, Carlos; Espinet-Gonzalez, Pilar; Vazquez, Manuel; Bosco, Nick; Miller, David; Kurtz, Sarah; Rubio, Francisca; McConnell,Robert

    2016-04-15

    This chapter describes the accumulated knowledge on CPV reliability with its fundamentals and qualification. It explains the reliability of solar cells, modules (including optics) and plants. The chapter discusses the statistical distributions, namely exponential, normal and Weibull. The reliability of solar cells includes: namely the issues in accelerated aging tests in CPV solar cells, types of failure and failures in real time operation. The chapter explores the accelerated life tests, namely qualitative life tests (mainly HALT) and quantitative accelerated life tests (QALT). It examines other well proven and experienced PV cells and/or semiconductor devices, which share similar semiconductor materials, manufacturing techniques or operating conditions, namely, III-V space solar cells and light emitting diodes (LEDs). It addresses each of the identified reliability issues and presents the current state of the art knowledge for their testing and evaluation. Finally, the chapter summarizes the CPV qualification and reliability standards.

  14. Basic Principles - Chapter 6

    Data.gov (United States)

    National Aeronautics and Space Administration — This chapter described at a very high level some of the considerations that need to be made when designing algorithms for a vehicle health management application....

  15. Schnabel Engineering Lecture

    OpenAIRE

    Cording, Edward

    2014-01-01

    Schnabel Engineering is pleased to bring you Dr. Edward J. Cording as our eighth lecturer of this series. Dr. Cording is Professor Emeritus of Civil and Environmental Engineering at the University of Illinois at Urbana-Champaign where he has taught and performed research in geotechnical engineering, focusing on rock mechanics, soil-structure interaction, and underground construction. The field has been his laboratory, on engineering projects; beginning in the 1960's with large deep caverns ...

  16. Lectures on LHC physics

    CERN Document Server

    Plehn, Tilman

    2012-01-01

    When we try to advance from a solid knowledge of field theory to LHC physics we usually encounter a frustrating problem: in particular Higgs physics and QCD techniques appear as a impenetrable granite block of phenomenological know-how, common lores, and historically grown intuition what works and what does not. I hope this lecture can drill a few holes into the rock and put you into a position to digest advanced writeups as well as some first research papers on the topic.

  17. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    2, 3, 4, 5 and 6 April REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 New Developments in Supersymmetry S. Raby / CERN-TH Introduction to supersymmetric grand unified theories. An introduction to the MSSM and different mechanisms for supersymmetry breaking. Then the details of SU(5) and SO(10) unification, the new gauge sector beyond the standard model, representations of quarks and leptons. Gauge and Yukawa coupling unification and some predictions.

  18. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    9, 10 and 11 May REGULAR LECTURE PROGRAMME From 10:00 to 12:00 hrs on 9 and 10 May and on 11 May from 11:00 to 12:00 hrs - Main Auditorium bldg. 500 Cosmology and Particle Physics K. Olive / CERN-TH A general overview of the standard big bang model will be presented with special emphasis on astro-particle physics. Specific topics will include: Inflation, Baryoogenesis, Nucleosynthesis and Dark Matter.

  19. Lectures on classical electrodynamics

    CERN Document Server

    Englert, Berthold-Georg

    2014-01-01

    These lecture notes cover classical electrodynamics at the level of advanced undergraduates or postgraduates. There is a strong emphasis on the general features of the electromagnetic field and, in particular, on the properties of electromagnetic radiation. It offers a comprehensive and detailed, as well as self-contained, account of material that can be covered in a one-semester course for students with a solid undergraduate knowledge of basic electricity and magnetism.

  20. Most recent Web Lectures

    CERN Multimedia

    Steven Goldfarb

    Web Archives of ATLAS Plenary Sessions, Workshops, Meetings, and Tutorials recorded over the past two years are available via the University of Michigan portal here. Most recent additions include the ROOT Workshop held at CERN on March 26-27, the Physics Analysis Tools Workshop held in Bergen, Norway on April 23-27, and the CTEQ Workshop: "Physics at the LHC: Early Challenges" held at Michigan State University on May 14-15. Viewing requires a standard web browser with RealPlayer plug-in (included in most browsers automatically) and works on any major platform. Lectures can be viewed directly over the web or downloaded locally. In addition, you will find access to a variety of general tutorials and events via the portal. Suggestions for events or tutorials to record in 2007, as well as feedback on existing archives is always welcome. Please contact us at wlap@umich.edu. Thank you and enjoy the lectures! The Michigan Web Lecture Team Tushar Bhatnagar, Steven Goldfarb, Jeremy Herr, Mitch McLachlan, Homer A....

  1. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    5, 6, 7, 8 and 9 March REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 Tracking at the LHC K. Safarik / CERN-EP The lecture will start with a short history of particle tracking in high-energy physics. Then we will concentrate on tracking in the LHC experiments. We will discuss various tracking devices proposed for these experiments, dividing them into two large groups: solid state detectors and gas detectors. Their characteristics, as well as their behaviour in different external conditions (i.e. magnetic field, radiation) will be compared. Furthermore, we will turn to the question: how to design a tracker using these various technologies, what are the essential parameters to be taken into account and we will apply these considerations to the proposed the LHC detectors. The last part of the lecture will be devoted to tracking software. We will mention simulation and concentrate on track finding and reconstruction, reviewing different algorithms prototyped for the LHC experiments. We will ...

  2. Lectures for CERN pensioners

    CERN Multimedia

    SC Unit

    2008-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  3. Summer Student Lecture Programme

    CERN Multimedia

    2004-01-01

    Main Auditorium, bldg. 500 More Information DATE TIME LECTURER TITLE Wednesday 7 July 09:15 - 10:00 L. Fayard, O. Ullaland, D. Heagerty (CERN) Programme Presentation Workshops presentation Information on Computing Rules 10:15 - 11:00 R. Aymar (CERN) Introduction to CERN (1/2) 11:15 - 12:00 J. Engelen (CERN) Introduction to CERN (2/2) 15:00 - 16:30 H. Menzel (CERN) An Introduction to Radiation Protection DATE TIME LECTURER TITLE Thursday 8 july 09:15 - 10:00 L. Di Lella (CERN) Introduction to Particle Physics (1/4) 10:15 - 11:00 L. Di Lella (CERN) Introduction to Particle Physics (2/4) 11:15 - 12:00 P. Chomaz (GANIL / CERN) Fundamental questions in modern nuclear physics: The challenge of exotic nuclei (1/2) DATE TIME LECTURER TITLE Friday 9 July 09:15 - 10:00 L. Di Lella (CERN) Introduction to Particle Physics (3/4) 10:15 - 11:00 P. Chomaz (GANIL / CERN) Fundamental questions in modern nuclear physics: The challenge of exotic nuclei (2/2) 11:15 - 12:00 P....

  4. Public Lectures | Events | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Public and special lectures. Academy Public Lectures · Public and special lectures in Mid-Year and Annual Meetings · Platinum Jubilee Lectures. Academy's annual and mid-year meetings include a special lecture by a senior Fellow in the morning of each meeting day and one public lecture by an eminent person, from ...

  5. The Computer-based Lecture

    Science.gov (United States)

    Wofford, Marcia M; Spickard, Anderson W; Wofford, James L

    2001-01-01

    Advancing computer technology, cost-containment pressures, and desire to make innovative improvements in medical education argue for moving learning resources to the computer. A reasonable target for such a strategy is the traditional clinical lecture. The purpose of the lecture, the advantages and disadvantages of “live” versus computer-based lectures, and the technical options in computerizing the lecture deserve attention in developing a cost-effective, complementary learning strategy that preserves the teacher-learner relationship. Based on a literature review of the traditional clinical lecture, we build on the strengths of the lecture format and discuss strategies for converting the lecture to a computer-based learning presentation. PMID:11520384

  6. Exploring Tablet PC Lectures: Lecturer Experiences and Student Perceptions in Biomedicine

    Science.gov (United States)

    Choate, Julia; Kotsanas, George; Dawson, Phillip

    2014-01-01

    Lecturers using tablet PCs with specialised pens can utilise real-time changes in lecture delivery via digital inking. We investigated student perceptions and lecturer experiences of tablet PC lectures in large-enrolment biomedicine subjects. Lecturers used PowerPoint or Classroom Presenter software for lecture preparation and in-lecture pen-based…

  7. Powder Metallurgy characteristics and application: state of the art

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2005-01-01

    Powder metallurgy process (P/M) is a near-net or net-shape manufacturing process that combines the features of shape making technology of powder compaction with the development of final material and design properties (physical and mechanical) during subsequent densification or consolidation processes, e.g. sintering. It utilizes the metal powder or powders of metal alloys. In this paper, the major historical developments in P/M are reviewed and discussed. The main parameters involved in the process and their effects on the product characteristics are presented and discussed, which include: powders and methods of their production, particle size and shape, compressibility and additives, sintering temperature and time and finishing processes. The advantages and limitations of powder metallurgy are also presented and discussed. Finally, applications and future developments of the process are outlined and discussed. (author)

  8. Powder Metallurgy Fabrication of Molybdenum Accelerator Target Disks

    Energy Technology Data Exchange (ETDEWEB)

    Lowden, Richard Andrew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kiggans Jr., James O. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nunn, Stephen D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Parten, Randy J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-07-01

    Powder metallurgy approaches for the fabrication of accelerator target disks are being examined to support the development of Mo-99 production by NorthStar Medical Technologies, LLC. An advantage of powder metallurgy is that very little material is wasted and, at present, dense, quality parts are routinely produced from molybdenum powder. The proposed targets, however, are thin wafers, 29 mm in diameter with a thickness of 0.5 mm, with very stringent dimensional tolerances. Although tooling can be machined to very high tolerance levels, the operations of powder feed, pressing and sintering involve complicated mechanisms, each of which affects green density and shrinkage, and therefore the dimensions and shape of the final product. Combinations of powder morphology, lubricants and pressing technique have been explored to produce target disks with minimal variations in thickness and little or no distortion. In addition, sintering conditions that produce densities for optimum target dissolvability are being determined.

  9. Uranium 2000 : International symposium on the process metallurgy of uranium

    International Nuclear Information System (INIS)

    Ozberk, E.; Oliver, A.J.

    2000-01-01

    The International Symposium on the Process Metallurgy of Uranium has been organized as the thirtieth annual meeting of the Hydrometallurgy Section of the Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM). This meeting is jointly organized with the Canadian Mineral Processors Division of CIM. The proceedings are a collection of papers from fifteen countries covering the latest research, development, industrial practices and regulatory issues in uranium processing, providing a concise description of the state of this industry. Topics include: uranium industry overview; current milling operations; in-situ uranium mines and processing plants; uranium recovery and further processing; uranium leaching; uranium operations effluent water treatment; tailings disposal, water treatment and decommissioning; mine decommissioning; and international regulations and decommissioning. (author)

  10. Lectures in Micro Meteorology

    DEFF Research Database (Denmark)

    Larsen, Søren Ejling

    This report contains the notes from my lectures on Micro scale meteorology at the Geophysics Department of the Niels Bohr Institute of Copenhagen University. In the period 1993-2012, I was responsible for this course at the University. At the start of the course, I decided that the text books...... available in meteorology at that time did not include enough of the special flavor of micro meteorology that characterized the work of the meteorology group at Risø (presently of the Institute of wind energy of the Danish Technical University). This work was focused on Boundary layer flows and turbulence...

  11. Lectures in particle physics

    CERN Document Server

    Green, Dan

    1994-01-01

    The aim of this book on particle physics is to present the theory in a simple way. The style and organization of the material is unique in that intuition is employed, not formal theory or the Monte Carlo method. This volume attempts to be more physical and less abstract than other texts without degenerating into a presentation of data without interpretation.This book is based on four courses of lectures conducted at Fermilab. It should prove very useful to advanced undergraduates and graduate students.

  12. Lectures on quantum chromodynamics

    CERN Document Server

    Smilga, Andrei

    2001-01-01

    Quantum chromodynamics is the fundamental theory of strong interactions. It is a physical theory describing Nature. Lectures on Quantum Chromodynamics concentrates, however, not on the phenomenological aspect of QCD; books with comprehensive coverage of phenomenological issues have been written. What the reader will find in this book is a profound discussion on the theoretical foundations of QCD with emphasis on the nonperturbative formulation of the theory: What is gauge symmetry on the classical and on the quantum level? What is the path integral in field theory? How to define the path integ

  13. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    26, 27, 28, 29 and 30 March REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 Introduction to General Relativity and Black Holes T. Damour / IHES, Bures-sur-Yvette, F. Conceptual foundations of General Relativity (GR). Uniqueness of GR. Mathematical framework: tensor calculus, Riemannian geometry, connection, 'spin' connection, curvature, Cartan's form calculus. Hilbert-Einstein action, Einstein equations. Weak gravitational fields. Post Newtonian Approximation. Gravitanional Waves. Exact solutions. Killing vectors. Experimental tests. Black Holes: extensions of the Schwarzschild solution; Kerr-Newman holes; no-hair theorems; energtics of black holes; the membrane approach; quantum mechanics of black holes; Bekenstein entropy; Hawking temperature; black holes and string theory.

  14. Joseph Mountin Lecture

    Centers for Disease Control (CDC) Podcasts

    2009-10-26

    In this podcast, William H. Foege, MD, MPH delivers the 29th Annual Joseph W. Mountin Lecture. Dr. Foege was a key leader in the smallpox effort and worked as an epidemiologist in the successful eradication campaign in the 1970s. Dr. Foege became chief of the Smallpox Eradication Program at CDC, and was appointed director of CDC in 1977.  Created: 10/26/2009 by Centers for Disease Control and Prevention (CDC).   Date Released: 10/29/2009.

  15. Microstructure and Aging of Powder-Metallurgy Al Alloys

    Science.gov (United States)

    Blackburn, L. B.

    1987-01-01

    Report describes experimental study of thermal responses and aging behaviors of three new aluminum alloys. Alloys produced from rapidly solidified powders and contain 3.20 to 5.15 percent copper, 0.24 to 1.73 percent magnesium, 0.08 to 0.92 percent iron, and smaller amounts of manganese, nickel, titanium, silicon, and zinc. Peak hardness achieved at lower aging temperatures than with standard ingot-metallurgy alloys. Alloys of interest for automobile, aircraft, and aerospace applications.

  16. Powder-metallurgy superalloy strengthened by a secondary gamma phase.

    Science.gov (United States)

    Kotval, P. S.

    1971-01-01

    Description of experiments in which prealloyed powders of superalloy compositions were consolidated by extrusion after the strengthening by precipitation of a body-centered tetragonal gamma secondary Ni3 Ta phase. Thin foil electron microscopy showed that the mechanical properties of the resultant powder-metallurgy product were correlated with its microstructure. The product exhibited high strength at 1200 F without loss of ductility, after thermomechanical treatment and aging.

  17. Quantum Optics and Nanophotonics : Lecture Notes of the Les Houches Summer School : Session CI

    CERN Document Server

    Sandoghdar, Vahid; Treps, Nicolas; Cugliandolo, Leticia F

    2017-01-01

    Quantum Optics and Nanophotonics consists of the lecture notes of the Les Houches Summer School 101 held in August 2013. Some of the most eminent experts in this flourishing area of research have contributed chapters lying at the intersection of basic quantum science and advanced nanotechnology. The book is part of the renowned series of tutorial books that contain the lecture notes of all the Les Houches Summer Schools since the 1950's and cover the latest developments in physics and related fields.

  18. The 1979 Bernard Gregory lectures

    International Nuclear Information System (INIS)

    Weisskopf, V.F.

    1980-02-01

    This volume contains the texts of the lectures given by Professor V.F. Weisskopf at CERN and in Paris in the autumn of 1979, as the first Gregory lecturer. The titles of the three different texts are 'Growing up with Field Theory', 'Recent Trends in Particle Physics' and 'L'Art et la Science'. While the latter lecture was given in French, an English text here follows the French one. The volume starts with a short biographical note about Bernard Gregory. (orig.)

  19. Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy

    Czech Academy of Sciences Publication Activity Database

    Moravčík, I.; Čížek, Jan; Kováčová, Z.; Nejezchlebová, J.; Kitzmantel, M.; Neubauer, E.; Kuběna, Ivo; Horník, Vít; Dlouhý, I.

    2017-01-01

    Roč. 701, July (2017), s. 370-380 ISSN 0921-5093 Institutional support: RVO:61389021 ; RVO:68081723 Keywords : tensile test * mechanical alloying * plasticity * mechanical characterization * powder metallurgy Subject RIV: JG - Metallurgy; JG - Metallurgy (UFM-A) OBOR OECD: Materials engineering ; Materials engineering (UFM-A) Impact factor: 3.094, year: 2016 https://www.sciencedirect.com/science/article/pii/S0921509317308535

  20. The Oskar Klein memorial lectures

    CERN Document Server

    1994-01-01

    The series of Oskar Klein Memorial Lectures is a must-read for those keenly involved or simply interested in exploring the many fascinating aspects of Physics. This volume presents two landmark lectures given by Hans Bethe in October 1990 and Alan H. Guth in June 1991 under the series of Oskar Klein Memorial Lectures. Hans Bethe's lectures dealt with two themes: the astrophysical importance of neutrinos in supernova outbursts and a theoretical account of neutrinos through observations of the neutrino flux from the centre of the sun. Anyone interested in understanding the processes involved in

  1. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    14, 15 and 16 May REGULAR LECTURE PROGRAMME 14, 15 May from 10:00 to 12:00 hrs - Main Auditorium bldg. 500 16 May from 11:00 to 12:00 hrs - Council Chamber, bldg 503 Modern Signal Processing: Wavelets vs. Fourier M. Vetterli / EPFL, Lausanne, CH and UC Berkeley Wavelets have established themselves as an important tool in modern signal processing as well as in applied mathematics. This is linked to several facts, among others: New theoretical advances have been achieved, like new forms of 4 time-frequency bases for signal analysis. Efficient computational algorithms are available. Many applications either used similar ideas, like for example the concept of multiresolution, or took advantage of the unified framework provided by wavelets. This combination of elegant theory, efficient algorithms, and successful applications makes the field of wavelets and signal processing quite exciting. It is the purpose of these lectures to establish the theory necessary to understand wavelets and related constructions. A...

  2. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    14, 15 and 16 May REGULAR LECTURE PROGRAMME 14, 15 May from 10:00 to 12:00 hrs - Main Auditorium bldg. 500 16 May from 11:00 to 12:00 hrs - Council Chamber, bldg 503 Modern Signal Processing: Wavelets vs. Fourier M. Vetterli / EPFL, Lausanne, CH and UC Berkeley Wavelets have established themselves as an important tool in modern signal processing as well as in applied mathematics. This is linked to several facts, among others: i. New theoretical advances have been achieved, like new forms of 4 time-frequency bases for signal analysis. ii. Efficient computational algorithms are available. iii. Many applications either used similar ideas, like for example the concept of multiresolution, or took advantage of the unified framework provided by wavelets. This combination of elegant theory, efficient algorithms, and successful applications makes the field of wavelets and signal processing quite exciting. It is the purpose of these lectures to establish the theory necessary to understand wavelets and related construct...

  3. Lectures on Lie groups

    CERN Document Server

    Hsiang, Wu-Yi

    2017-01-01

    This volume consists of nine lectures on selected topics of Lie group theory. We provide the readers a concise introduction as well as a comprehensive 'tour of revisiting' the remarkable achievements of S Lie, W Killing, É Cartan and H Weyl on structural and classification theory of semi-simple Lie groups, Lie algebras and their representations; and also the wonderful duet of Cartans' theory on Lie groups and symmetric spaces.With the benefit of retrospective hindsight, mainly inspired by the outstanding contribution of H Weyl in the special case of compact connected Lie groups, we develop the above theory via a route quite different from the original methods engaged by most other books.We begin our revisiting with the compact theory which is much simpler than that of the general semi-simple Lie theory; mainly due to the well fittings between the Frobenius-Schur character theory and the maximal tori theorem of É Cartan together with Weyl's reduction (cf. Lectures 1-4). It is a wonderful reality of the Lie t...

  4. Hurrah for Chapter Books.

    Science.gov (United States)

    Jones, Glenowyn L.

    This annotated bibliography contains a list of 42 recent Chapter Books. The bibliography is divided into the following topics: Adventure-Survival (3 titles); Autobiography-Biography (3 titles); Death (1 title); Easy Readers (8 titles); Good Reading (12 titles); Historical Fiction (10 titles); Mystery (3 titles); Newbery Award Winner, 2000; and…

  5. Water resources (Chapter 12)

    Science.gov (United States)

    Thomas C. Brown; Romano Foti; Jorge Ramirez

    2012-01-01

    In this chapter, we focus on the vulnerability of U.S. freshwater supplies considering all lands, not just forest and rangelands. We do not assess the condition of those lands or report on how much of our water supply originates on lands of different land covers or ownerships, because earlier Resources Planning Act (RPA) Assessment work addressed these topics....

  6. Floristics [Chapter 3

    Science.gov (United States)

    J. D. Haines; R. C. Musselman; C. M. Regan

    1994-01-01

    The initial habitat classification as described in Chapter 2 was conducted in 1986 and 1987 based upon field identification of plant species. A field collection of vascular plant species was made during the 1988, 1989, and 1990 summer seasons. The plant species collected were identified and verified in cooperation with the Rocky Mountain Herbarium at the University of...

  7. Nursery management [Chapter 16

    Science.gov (United States)

    Kim M. Wilkinson

    2009-01-01

    This handbook provides an overview of the factors that go into starting and operating a native plant nursery. Management includes all aspects of working with plants in all their phases of growth as described in Chapter 3, Crop Planning and Developing Propagation Protocols. Management also includes working with the community; organizing materials and infrastructure;...

  8. Chapter 0: Executive summary

    International Nuclear Information System (INIS)

    1995-01-01

    This chapter deals with the background (Gabcikovo hydro power scheme was input in October 1992), project objective, project framework, equipment, establishment of the integrated modelling system, model setup, calibration and validation, definitions of scenarios for model application and with the results of model applications

  9. Research recommendations [Chapter 10

    Science.gov (United States)

    Daniel G. Neary; Alvin L. Medina; John N. Rinne

    2012-01-01

    This chapter contains a number of research recommendations that have developed from the 15 years of research on the UVR conducted by the Southwest Watershed Science Team, as well as from insights from key cooperators and contacts. It is meant to be our best insight as to where efforts should go now. Achieving these recommendations will depend on a number of factors,...

  10. Chapter 8. Data Analysis

    Science.gov (United States)

    Lyman L. McDonald; Christina D. Vojta; Kevin S. McKelvey

    2013-01-01

    Perhaps the greatest barrier between monitoring and management is data analysis. Data languish in drawers and spreadsheets because those who collect or maintain monitoring data lack training in how to effectively summarize and analyze their findings. This chapter serves as a first step to surmounting that barrier by empowering any monitoring team with the basic...

  11. Forestry [Chapter 11

    Science.gov (United States)

    H. Gyde Lund; William A. Befort; James E. Brickell; William M. Ciesla; Elizabeth C. Collins; Raymond L. Czaplewski; Attilio Antonio Disperati; Robert W. Douglass; Charles W. Dull; Jerry D. Greer; Rachel Riemann Hershey; Vernon J. LaBau; Henry Lachowski; Peter A. Murtha; David J. Nowak; Marc A. Roberts; Pierre Schram; Mahadev D. Shedha; Ashbindu Singh; Kenneth C. Winterberger

    1997-01-01

    Foresters and other resource managers have used aerial photographs to help manage resources since the late 1920s. As discussed in chapter 1, however, it was not until the mid-1940s that their use became common. Obtaining photographic coverage was always a problem. For many areas of the world, reasonably complete coverage did not exist until after World War II. In...

  12. Chapter 3: Wood Decay

    Science.gov (United States)

    Dan Cullen

    2014-01-01

    A significant portion of global carbon is sequestered in forest systems. Specialized fungi have evolved to efficiently deconstruct woody plant cell walls. These important decay processes generate litter, soil bound humic substances, or carbon dioxide and water. This chapter reviews the enzymology and molecular genetics of wood decay fungi, most of which are members of...

  13. Sustainable careers: Introductory chapter

    NARCIS (Netherlands)

    Heijden, B.I.J.M. van der; Vos, A. de; Vos, A. de; Heijden, B.I.J.M. van der

    2015-01-01

    In this introductory chapter we will introduce the concept of ‘sustainable careers’ within the broader framework of contemporary careers. Departing from changes in the career context with regard to the dimensions of time, social space, agency and meaning, we advocate a fresh perspective on careers

  14. Tundra, Chapter 5

    Science.gov (United States)

    K. Nadelhoffer; L.H. Geiser

    2011-01-01

    The North American Arctic, comprising the Tundra and Arctic Cordillera ecoregions (CEC 1997, Chapter 2), covers more than 3 million km2 (300 million ha), and accounts for nearly 14 percent of the North American land mass. The North American Arctic also constitutes about 20 percent of the much larger circumpolar Arctic shared by Canada, the United...

  15. Chapter 3: Energy Security

    Energy Technology Data Exchange (ETDEWEB)

    Foust, Thomas D.; Arent, Doug; de Carvalho Macedo, Isaias; Goldemberg, Jose; Hoysala, Chanakya; Filho, Rubens Maciel; Nigro, Francisco E. B.; Richard, Tom L.; Saddler, Jack; Samseth, Jon; Somerville, Chris R.

    2015-04-01

    This chapter considers the energy security implications and impacts of bioenergy. We provide an assessment to answer the following questions: What are the implications for bioenergy and energy security within the broader policy environment that includes food and water security, development, economic productivity, and multiple foreign policy aspects? What are the conditions under which bioenergy contributes positively to energy security?

  16. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    11, 12, 13, 14 and 15 June REGULAR LECTURE PROGRAMME From 11:00 hrs - Main Auditorium bldg. 500 What have we learned from LEP J. Ellis / CERN-TH The basic formalism of the Standard Model will be reviewed, and the limited state of our knowledge before the start-up of LEP will be recalled. Neutrino counting at LEP will be compared with astrophysical and cosmological constraints. The interpretation of precision electroweak data will be discussed, including their predictions for the top quark and the Higgs boson, and the hints they offer for the future direction beyond the Standard Model: probably a weakly-interacting theory that may be extrapolated up to a grand unification scale. Topics in QCD and heavy-flavour physics will be discussed briefly, and topics in W physics at greater length. Direct LEP searches for the Higgs boson and supersymmetric particles will be discussed, and the prospects for their discoveries at future accelerators will be previewed.

  17. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    21, 22, 23 November LECTURES FOR POSTGRADUATE STUDENTS From 11:00 hrs - Council Chamber bldg. 503 on 21 November Auditorium, bldg 500 on 22, 23 November Introduction to symmetry breaking phenomena in physics E. Brezin / ENS, Paris, F. The notion of broken symmetries started slowly to emerge in the 19th century. The early studies of Pasteur on the parity asymmetry of life, the studies of Curie on piezoelectricity and on the symmetries of effects versus the symmetry of causes (which clearly excluded spontaneous symmetry breaking), are important historical landmarks. However the possibility of spontaneous symmetry breaking within the usual principles of statistical mechanics, waited for the work of Peierls and Onsager. The whole theory of phase transitions and critical phenomena, as well as the construction of field theoretic models as long distance limit of yet unknown physics, relies nowadays on the concept of criticality associated to spontaneous symmetry breaking. The phenomena of Goldstone bosons, of Meissn...

  18. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    19, 20, 21, 22 and 23 February REGULAR LECTURE PROGRAMME From 11:00 hrs - 19, 20 and 21 February Main Auditorium bldg. 500, 22 and 23 February Council Chamber, bldg 503 Introduction to Cryogenic Engineering J.G. Weisend / SLAC, Stanford, USA Cryogenic engineering is an important speciality at CERN. With the construction of LHC, this technology will have an even greater impact on machine operations. The goal of the course is to give people not working in cryogenics an appreciation of the basic principals and problems associated with the field. The course will also provide a foundation for future learning in cryogenics. Topics to be covered will include: properties of cryogenic fluids and materials, refrigeration, cryostat design, instrumentation, safety and propertiesof He II. Examples of working cryogenic systems, many of them from high energy physics, will be presented.

  19. Lectures on LHC physics

    CERN Document Server

    Plehn, Tilman

    2015-01-01

    With the discovery of the Higgs boson, the LHC experiments have closed the most important gap in our understanding of fundamental interactions, confirming that such interactions between elementary particles can be described by quantum field theory, more specifically by a renormalizable gauge theory. This theory is a priori valid for arbitrarily high energy scales and does not require an ultraviolet completion. Yet, when trying to apply the concrete knowledge of quantum field theory to actual LHC physics - in particular to the Higgs sector and certain regimes of QCD - one inevitably encounters an intricate maze of phenomenological know-how, common lore and other, often historically developed intuitions about what works and what doesn’t. These lectures cover three aspects to help understand LHC results in the Higgs sector and in searches for physics beyond the Standard Model: they discuss the many facets of Higgs physics, which is at the core of this significantly expanded second edition; then QCD, to the deg...

  20. Lectures on quantum information

    International Nuclear Information System (INIS)

    Bruss, D.; Leuchs, G.

    2007-01-01

    Quantum Information Processing is a young and rapidly growing field of research at the intersection of physics, mathematics, and computer science. Its ultimate goal is to harness quantum physics to conceive - and ultimately build - 'quantum' computers that would dramatically overtake the capabilities of today's 'classical' computers. One example of the power of a quantum computer is its ability to efficiently find the prime factors of a large integer, thus shaking the supposedly secure foundations of standard encryption schemes. This comprehensive textbook on the rapidly advancing field introduces readers to the fundamental concepts of information theory and quantum entanglement, taking into account the current state of research and development. It thus covers all current concepts in quantum computing, both theoretical and experimental, before moving on to the latest implementations of quantum computing and communication protocols. With its series of exercises, this is ideal reading for students and lecturers in physics and informatics, as well as experimental and theoretical physicists, and physicists in industry. (orig.)

  1. Artsimovich memorial lecture

    International Nuclear Information System (INIS)

    Pellat, R.

    2003-01-01

    After half a century of work, mastering on earth thermonuclear fusion to produce energy is becoming a realistic challenge: despite its scientific and technological complexity, considerable progress has been obtained without encountering insurmountable roadblocks. Such progress is due for a great part to all the pioneers, as Academician Lev Andreevich Artsimovich, who, with their talents and a visionary mind, internationally promoted the civil use of thermonuclear fusion, a source which could help to face the long term energy demand. To honour their faith and their investment in this challenge which would solve humankind energy needs on a millenary scale, I will try in this Artsimovich Memorial Lecture to: situate the fusion contribution in the future energy mix contemplated today ; survey the state of the art of fusion physics and technology fields, giving some examples; underline the next priority, to study a burning plasma, launching the construction of the International Thermonuclear Experimental Reactor (ITER) as soon as possible

  2. Göttingen Lectures

    CERN Document Server

    Woyczyński, Wojbor A

    1998-01-01

    These lecture notes are woven around the subject of Burgers' turbulence/KPZ model of interface growth, a study of the nonlinear parabolic equation with random initial data. The analysis is conducted mostly in the space-time domain, with less attention paid to the frequency-domain picture. However, the bibliography contains a more complete information about other directions in the field which over the last decade enjoyed a vigorous expansion. The notes are addressed to a diverse audience, including mathematicians, statisticians, physicists, fluid dynamicists and engineers, and contain both rigorous and heuristic arguments. Because of the multidisciplinary audience, the notes also include a concise exposition of some classical topics in probability theory, such as Brownian motion, Wiener polynomial chaos, etc.

  3. Optimising Lecture Time

    DEFF Research Database (Denmark)

    Holst-Christensen, Bo

    interest in getting a degree, they prefer the educators to do the work for them. The focus of my experiments have therefore been to develop teaching techniques that ensures that the students study efficiently and at the same time moves the task of identifying which parts of the subjects that are giving...... the students problems from the educator to the students. By using techniques that put more weight on student participation, cooperation and preparation, I have been able to cut significantly down on the time used for lecturing, allowing more time for student work and reflection. As an example by getting...... the students to identify the parts of the subjects that need further explanation, I get the students to take ownership of the learning task and at the same time give me a more direct feedback. By creating teaching materials and exercises that can be used in a number of different ways, it is possible to involve...

  4. ESP Methodology for Science Lecturers.

    Science.gov (United States)

    Rogers, Angela; Mulyana, Cukup

    A program designed to teach university science lecturers in Indonesia how to design and teach one-semester courses in English for special purposes (ESP) is described. The program provided lecturers with training in language teaching methodology and course design. The piloting of the teacher training course, focusing on physics instruction, is…

  5. Improving Student Learning during Lectures.

    Science.gov (United States)

    Gibbs, Graham; And Others

    1987-01-01

    Described are five techniques to improve student learning during lectures: (1) separating listening from recording and requiring note-taking to be undertaken from memory; (2) using active review during the lecture; (3) using structured discussion; (4) using instant questionnaires; and (5) having students summarize important things from the…

  6. Co-ordinated Classroom Lectures.

    Science.gov (United States)

    Harmon, Darell Boyd

    From a series of lectures, a selection of eight are oriented principally toward the biologically developing child, and the physiological operations in visual process. The numbered lectures are--(1) The Coordinated Classroom, its Philosophy and Principles, (2) An Outline of a Biological Point of View, (3) The Evolution of Structure--despite man's…

  7. Three lectures on Newton's laws

    OpenAIRE

    Kokarev, Sergey S.

    2009-01-01

    Three small lectures are devoted to three Newton's laws, lying in the foundation of classical mechanics. These laws are analyzed from the viewpoint of our contemporary knowledge about space, time and physical interactions. The lectures were delivered for students of YarGU in RSEC "Logos".

  8. Chapter 8: Youth Culture

    DEFF Research Database (Denmark)

    Stald, Gitte Bang

    2016-01-01

    no longer has to be fixed, and can be negotiated. The discussion at the end of the chapter focuses on how technology changes at an increasing pace, and how its adoption changes the way we live and interact. Mobile phone use influences interpersonal and group dynamics, from the smallest unit of society......Gitte Stald has been researching mobile technologies since their early days of adoption by younger audiences. In her talk, she focuses on adolescents and their mobile media use. Stald shares her findings from the longitudinal and cross-cultural studies she has been conducting over the years....... The chapter builds on findings from a Danish and a European context, but they can be expanded to think about mobile youth culture in general. Gitte Stald discusses the concepts of digital natives and digital immigrants, sharing, immediacy, and the feeling of presence (or absent presence), social coordination...

  9. Chapter 8. Morphology: Verbs

    OpenAIRE

    Nesset, Tore

    2015-01-01

    Numerous exceptions and idiosyncrasies make the verb a major challenge in Modern Russian. Why are present tense forms inflected for first, second and third person, while past tense forms are inflected for masculine, feminine and neuter gender? Where do all the consonant alternations in verbs come from? Why is the particle бы used to form subjunctive constructions? You will find answers to these and many other questions in this chapter, which explores all the verb forms in Old Rusian, and expl...

  10. Development of Cu-Be bronzes through powder metallurgy

    International Nuclear Information System (INIS)

    Abbas, M.

    2012-01-01

    Copper and copper alloys are the major group of commercial alloy. One of the important copper bronzes is Copper beryllium. This is unique among all engineering alloys. Copper beryllium alloy possesses the highest strength in all the copper base alloys. Development of copper beryllium alloy with powder metallurgy is challenging problem due to toxicity of beryllium dust. Purpose of this project to find out parameters by which copper beryllium with all unique properties should obtained. For this purpose efforts are put on development of alternative to copper beryllium system like copper-tin and copper-aluminum by powder metallurgy route. Different time of milling with uniaxial pressure of about 200 MPa and different sintering temperature according to phase diagram of alloy, with different soaking time is tried. Problems may occur like decrease in density after sintering, breaking of samples by Rockwell A, B and C indenters arid by hammering. Cold iso-static pressing at 300 MPa and sintering at above 900 degree C is used to develop copper beryllium alloy. As quenched samples are heat treated at 260 degree C, 315 degree C and 370 degree C with different soaking time of 30, 90 and 180 minutes to find out optimum time and temperature parameters. . It is observed that at aging at 260 degree C for 180 minutes, aging at 315 degree C for 180 minutes and aging at 370 degree C for 30 minutes produce optimum result. By observing these pellets by SEM, precipitates appeared in peak-aged alloy and bigger precipitates in over-aged alloy. Copper beryllium alloy developed through powder metallurgy has better prospects than other copper bronzes. (author)

  11. Welding Metallurgy and Processing Issues for Joining of Power Sources

    Energy Technology Data Exchange (ETDEWEB)

    Lienert, Thomas J. [Los Alamos National Laboratory; Reardon, Patrick T. [Los Alamos National Laboratory

    2012-08-14

    Weldability issues with the pertinent alloys have been reviewed and preliminary results of our work on Haynes 25 have been presented. Further results on the mechanical properties and metallography on the EB welds are imminent. Hot-ductility experiments will commence within a few weeks. Aging studies on the effects of heat treatment using the Gleeble are also planned. MST-6 has extensive background in the welding metallurgy of the pertinent alloys. We also have considerable experience with the various welding processes to be used.

  12. Annual report of the Metallurgy Division - period ending December 1975

    International Nuclear Information System (INIS)

    1976-01-01

    The R and D activities of the Metallurgy Division of the Bhabha Atomic Research Centre, Bombay (India) during 1975 are described. Some of the R and D programmes of particular interest to nuclear technology are: (1) flowsheet development for the production of rare metals and alloys of nuclear use e.g. hafnium, beryllium, zirconium (2) metallurgical, irradiation hardening and corrosion studies on Zr and Zr-base alloys and (3) studies of nuclear ceramic materials such as UO2 and beryllia. (M.G.B.)

  13. Powder Metallurgy Reconditioning of Food and Processing Equipment Components

    Science.gov (United States)

    Nafikov, M. Z.; Aipov, R. S.; Konnov, A. Yu.

    2017-12-01

    A powder metallurgy method is developed to recondition the worn surfaces of food and processing equipment components. A combined additive is composed to minimize the powder losses in sintering. A technique is constructed to determine the powder consumption as a function of the required metallic coating thickness. A rapid method is developed to determine the porosity of the coating. The proposed technology is used to fabricate a wear-resistant defectless metallic coating with favorable residual stresses, and the adhesive strength of this coating is equal to the strength of the base metal.

  14. Properties of porous magnesium prepared by powder metallurgy.

    Science.gov (United States)

    Čapek, Jaroslav; Vojtěch, Dalibor

    2013-01-01

    Porous magnesium-based materials are biodegradable and promising for use in orthopaedic applications, but their applications are hampered by their difficult fabrication. This work reports the preparation of porous magnesium materials by a powder metallurgy technique using ammonium bicarbonate as spacer particles. The porosity of the materials depended on the amount of ammonium bicarbonate and was found to have strong negative effects on flexural strength and corrosion behaviour. However, the flexural strength of materials with porosities of up to 28 vol.% was higher than the flexural strength of non-metallic biomaterials and comparable with that of natural bone. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. CURRENT STATE AND TENDENCIES OF DEVELOPMENT OF FERROUS METALLURGY IN THE EAEU COUNTRIES

    Directory of Open Access Journals (Sweden)

    N. P. Dragun

    2016-01-01

    Full Text Available The analysis of modern status and tendencies of development of ferrous metallurgy in the countries of the EAEU is described in the article. On the basis of the conducted analysis are revealed the identified systemic problems of metallurgy and the conclusions on possible ways of their solution using the potential of integration are given.

  16. Preliminary analysis about reducing production costs in uranium mining and metallurgy at Fuzhou uranium mine

    International Nuclear Information System (INIS)

    Wu Sanmao

    1999-01-01

    The production costs in uranium ming and metallurgy have been analyzed quantitatively term by term according to present production situation for The Uranium Mining and Metallurgy Corp, which is part of Fuzhou Uranium Mine. The principal factors influencing on the production costs and the main means reducing the production costs have been found

  17. Lectures on quantum mechanics

    CERN Document Server

    Weinberg, Steven

    2013-01-01

    Nobel Laureate Steven Weinberg combines his exceptional physical insight with his gift for clear exposition to provide a concise introduction to modern quantum mechanics. Ideally suited to a one-year graduate course, this textbook is also a useful reference for researchers. Readers are introduced to the subject through a review of the history of quantum mechanics and an account of classic solutions of the Schrödinger equation, before quantum mechanics is developed in a modern Hilbert space approach. The textbook covers many topics not often found in other books on the subject, including alternatives to the Copenhagen interpretation, Bloch waves and band structure, the Wigner–Eckart theorem, magic numbers, isospin symmetry, the Dirac theory of constrained canonical systems, general scattering theory, the optical theorem, the 'in-in' formalism, the Berry phase, Landau levels, entanglement and quantum computing. Problems are included at the ends of chapters, with solutions available for instructors at www.cam...

  18. John Adams Lecture

    CERN Multimedia

    PH Department

    2010-01-01

    13 December 2010 14:30 - Council Chamber, Bldg.503-1-001 Accelerator Breakthroughs, Achievements and Lessons from the Tevatron Collider V. Shiltsev / Fermilab’s Accelerator Physics Centre This year we celebrate the 25th anniversary of the first proton-antiproton collisions in the Tevatron. For two and a half decades the Tevatron at Fermilab (Batavia, IL, USA) was a centerpiece of the US and world’s High Energy Physics as the world’s highest energy particle collider at 1.8 TeV center of mass energy. While funding agencies are deciding on a 3-year extension of the Collider Run II operation through 2014, we – in this 2010 John Adams Lecture - will take a look in exciting story of the Tevatron: the story of long preparations, great expectations, numerous difficulties, years of “blood and sweat”, continuous upgrades, exceeding original goals (by a factor of 400) and high emotions. An accelerator scientist prospective will be given on a wide spectrum o...

  19. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    27, 28, 29 June and 2, 3 July REGULAR LECTURE PROGRAMME From 11:00 hrs - Council Chamber bldg. 503 on 27, 28, 29 June and Auditorium, bldg 500 on 2, 3 July Particle Identification at the LHC P. Eerola / Lund University, SE The LHC experiments will explore new frontiers of particle physics. To maximize the physics potential of LHC, we need identification of leptons, hadrons, photons and 'invisible' particles. This is realized through reconstruction of electrons and muons, charged particle tracking and identification, b- and tau-tagging, and jet reconstruction. In addition, missing energy has to be measured in order to look for signatures of invisible particles. The experimental conditions posed by the collider, which will be operating at higher energy and luminosity than the present ones, are demanding. A large dynamical range is required in order to measure energies and momenta ranging from below one GeV to several TeVs. The detectors should be able to cope with the 40 MHz collision rate, with a large number ...

  20. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    14, 15, 16, 17, 18 January LECTURES FOR POSTGRADUATE STUDENTS From 11:00 hrs - Auditorium, bldg 500 Superconducting materials suitable for magnets D.C. Larbalestier / Univ. of Wisconsin, USA The range of materials available for superconducting magnets is steadily expanding, even as the choice of material becomes potentially more complex. When virtually all magnets were cooled by helium at ~2-5 K it was easy to separate the domain of Nb-Ti from those of Nb3Sn applications and very little surprise that more than 90% of all magnets are still made from Nb-Ti. But the development of useful conductors of the Bi-Sr-Ca-Cu-O and YBa2Cu3Ox high temperature superconductors, coupled to the recent discovery of the 39 K superconductor MgB2 and the developing availability of cryocoolers suggests that new classes of higher temperature, medium field magnets based on other than Nb-based conductors could become available in the next 5-10 years. My talks will discuss the essential physics and materials science of these 5 classes...

  1. ACADEMIC TRAINING LECTURE

    CERN Multimedia

    Academic Training; Tel. 73127

    2002-01-01

    14, 15, 16, 17, 18 January LECTURE SERIES From 11:00 hrs - Auditorium, bldg 500 Superconducting materials suitable for magnets D.C. Larbalestier / Univ. of Wisconsin, USA The range of materials available for superconducting magnets is steadily expanding, even as the choice of material becomes potentially more complex. When virtually all magnets were cooled by helium at ~2-5 K it was easy to separate the domain of Nb-Ti from those of Nb3Sn applications and very little surprise that more than 90% of all magnets are still made from Nb-Ti. But the development of useful conductors of the Bi-Sr-Ca-Cu-O and YBa2Cu3Ox high temperature superconductors, coupled to the recent discovery of the 39 K superconductor MgB2 and the developing availability of cryocoolers suggests that new classes of higher temperature, medium field magnets based on other than Nb-based conductors could become available in the next 5-10 years. My talks will discuss the essential physics and materials science of these 5 classes of material - Nb-Ti...

  2. SUMMER STUDENT LECTURE PROGRAMME

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    Main Auditorium bldg. 500 Date Time Lecturer Title Monday 9 July 9:15 10:15 11:15 R. Kleiss / CERN L. Rolandi / CERN L. Rolandi / CERN Fundamental Concepts of Particle Physics (1/6) Big Experiments Discussion Session Tuesday 10 July 9:15 10:15 11:15 R. Kleiss / CERN R. Kleiss / CERN C. Joram Fundamental Concepts of Particle Physics (2/6) Fundamental Concepts of Particle Physics (3/6) Particle Detectors (1/5) Wednesday 11 July 9:15 10:15 11:15 R. Kleiss / CERN C. Joram / CERN R. Kleiss / C. Joram Fundamental Concepts of Particle Physics (4/6) Particle Detectors (2/5) Discussion Session Thursday 12 July 9:15 10:15 11:15 R. Kleiss / CERN C. Joram / CERN C. Joram / CERN Fundamental Concepts of Particle Physics (5/6) Particle Detectors (3/5) Particle Detectors (4/5) Friday 13 July 9:15 10:15 11:15 R. Kleiss / CERN C. Joram / CERN R. Kleiss / C. Joram Fundamental Concepts of Particle Physics (6/6) Particle Detectors (5/5) Discussion Session Monday 16 July 9:15 10:15 11:15 A. Pich O. Brüning C...

  3. SUMMER STUDENT LECTURE PROGRAMME

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    Main Auditorium bldg. 500 Date Time Lecturer Title Wednesday 4 July 9:15 10:15 11:15 14:00 15:00 15:45 L. Maiani / CERN L. Maiani / CERN M. Franklin / CERN G. Stevenson M. Diemoz O. Ullaland Introduction to CERN & Particle Physics (1/2) Introduction to CERN & Particle Physics (2/2) Classic Experiments (1/3) CERN Radiation Protection CERN Information on Activities CERN Intro to workshops Thursday 5 July 9:15 10:15 11:15 14:00 15:00 16:30 M. Franklin / CERN M. Franklin / CERN M. Franklin / CERN F. Close F. Close   Classic Experiments (2/3) Classic Experiments (3/3) Discussion session Particle Physics (for non-physics students) (1/4) Particle Physics (for non-physics students) (2/4) Welcome Drink Friday 6 July 9:15 10:15 F. Close F. Close Particle Physics (for non-physics students) (3/4) Particle Physics (for non-physics students) (4/4) Monday 9 July 9:15 10:15 11:15 R. Kleiss / CERN L. Rolandi / CERN L. Rolandi / CERN Fundamental Concepts of Particle Physics (1/6) Big Experime...

  4. SUMMER STUDENT LECTURE PROGRAMME

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    Main Auditorium bldg. 500 Date Time Lecturer Title Monday 23 July 9:15 10:15 11:15 A. Pich R. Jacobsen / LBLN, Berkeley (USA) T. Cass / CERN Particle Physics: the Standard Model (6/8) From Raw Data to Physics Results (1/3) Computing at CERN (1/3) Tuesday 24 July 9:15 10:15 11:15 A. Pich R. Jacobsen / LBLN, Berkeley (USA) T. Cass / CERN Particle Physics: the Standard Model (7/8) From Raw Data to Physics Results (2/3) Computing at CERN (2/3) Wednesday 25 July 9:15 10:15 11:15 A. Pich R. Jacobsen / LBLN, Berkeley (USA) A. Pich and R. Jacobsen J. Tuckmantel / CERN Particle Physics: the Standard Model (8/8) From Raw Data to Physics Results (3/3) Discussion Session Superconducting cavities Thursday 26 July 9:15 10:15 11:15 T. Nakada / CERN P. Wells / CERN T. Cass / CERN Violation of Particle Anti-particle Symmetry (1/3) LEP Physics (1/4) Computing at CERN (3/3) Friday 27July 9:15 10:15 11:15 T. Nakada / CERN P. Wells / CERN T. Nakada; T. Cass T. Nakada in main auditorium T. Cass in TH auditorium Violati...

  5. SUMMER STUDENT LECTURE PROGRAMME

    CERN Multimedia

    Academic Training; Tel. 73127

    2001-01-01

    Main Auditorium bldg. 500 Date Time Lecturer Title Monday 30 July 9:15 10:15 11:15 G. Guidice / CERN T. Nakada / CERN P. Wells / CERN Beyond the Standard Model (1/3) Violation of Particle Anti-particle Symmetry (3/3) LEP Physics (3/4) Tuesday 31 July 9:15 10:15 11:15 G. Guidice / CERN F. Dydak / CERN P. Wells / CERN P. Lebrun / CERN P. Lebrun / CERN Beyond the Standard Model (2/3) Neutrino Physics (1/4) LEP Physics (4/4) Superconducting Technology for particle accelerators (1/2) Superconducting Technology for particle accelerators (2/2) Wednesday 1 August 9:15 10:15 11:15 G. Guidice / CERN F. Dydak / CERN G. Guidice; P. Wells G. Guidice in main auditorium, P. Wells in TH auditorium) O. Grobner / CERN O. Grobner / CERN Beyond the Standard Model (3/3) Neutrino Physics (2/4) Discussion Session Ultra High Vacuum Technology (1/2) Ultra High Vacuum Technology (2/2) Thursday 2 August 9:15 10:15 11:15 F. Antinori / CERN F. Dydak / CERN J. Aysto / CERN Heavy Ions (1/2) Neutrino Physics (3/4) Isolde Physics O...

  6. The mysterious world of plutonium metallurgy: Past and future

    International Nuclear Information System (INIS)

    Hecker, S.S.; Hammel, E.F.

    1998-01-01

    The first atomic bomb detonated at the Trinity Site in New Mexico on July 16, 1945, used plutonium, a man-made element discovered < 5 yr earlier. The story of how Manhattan Project scientists and engineers tackled the mysteries of this element and fabricated it into the first atomic bomb is one of the most fascinating in the history of metallurgy and materials. The authors are currently trying to generate renewed interest in plutonium metallurgy because of the challenge posed by President Clinton, i.e., to keep the nuclear stockpile of weapons safe and reliable without nuclear testing. The stockpile stewardship challenge requires either a lifetime extension of the plutonium components or a remanufacture--neither of which can be verified by testing. In turn, this requires that one achieve a better fundamental understanding of plutonium. Of special interest is the effect of self-irradiation on the properties and on the long-term stability of plutonium and its alloys. Additional challenges arise from long-term concerns about disposing of plutonium and dealing with its environmental legacy. It is imperative to interest the next generation of students in these plutonium challenges

  7. Turning points in physics, a series of lectures given at Oxford University in Trinity Term 1958

    CERN Document Server

    Blin-Stoyle, Roger John; Mendelssohn, Kurt; Temple, G; Waismann, F; Wilkinson, Denys Haigh; De Boer, J; Brinkman, H; Casimir, H B G

    1959-01-01

    Turning Points in Physics is a series of 1958 lectures presented at the Oxford University in Trinity Term. This six-chapter book highlights the interplay between assumptions, theories, and experimental discoveries in physics. The first chapter provides a brief introduction to the physical theory and field physics. The following two chapters cover the basic principles of quantum nature of matter and radiation, as well as the introduction of the probability concept in the field physics. The discussion then shifts to the theory of relativity and the fundamentals of cause and effect. The last chap

  8. Quality Management. Chapter 19

    International Nuclear Information System (INIS)

    Hiles, P.A.; McLean, I.D.; Christofides, S.

    2014-01-01

    This chapter introduces the principles and definitions of quality management systems (QMSs) for radiology facilities, to give a framework to assist in the setting up of such systems and to emphasize the role of the medical physicist in this context. While there is a diversity of terms currently in use to describe quality processes both generally and specifically within radiology, there is broad agreement that the effective management of radiation medicine services demands a quality culture that includes a systematic approach to the elements that govern the delivery of that service. Therefore, the concept of quality assurance (QA) within the radiological facility covers, in its widest sense, all those factors that affect the intended outcome, that is, a clinical diagnosis. The medical physicist has an important role in the overall QMS, especially, but not exclusively, with respect to the equipment performance. A worked example of a quality control (QC) programme is included at the end of the chapter, to demonstrate the depth of detail and involvement of the medical physicist

  9. Lecture notes on the safety aspects in the industrial applications of radiation sources - Part I

    International Nuclear Information System (INIS)

    The report comprises the notes of the lectures delivered on the safety aspects in industrial applications of radiation sources. The notes are presented in 9 chapters. Basic mathematics relevant to the topic and basic concepts of nuclear physics are introduced in chapters I and II respectively. Various aspects of interaction of radiation with matter and living cells are discussed in chapters III and IV respectively. The biological effects of ionizing radiations are described in chapter V. Various commonly used units of measurement of radiation and radioactivity are defined and explained and measuring methods of radiation exposure are described in chapter VI. Chapter VII deals with the maximum permissible levels of radiation, both internal and external, for occupational workers as well as population. The same chapter also deals with ICRP recommendations in this connection. Commonly used radiation detectors and instruments with associated electronics are described in chapter VIII. Production of radioisotopes, radiation sources and labelled compounds is described in chapter IX. A table of useful radioisotopes is appended to this chapter. A bibliography in which references are arranged chapterwise is also given at the end. (M.G.B.)

  10. Palaeoclimate. Chapter 6

    International Nuclear Information System (INIS)

    Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

    2007-01-01

    This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

  11. CHAPTER 1. Introduction

    KAUST Repository

    Zhang, Lianbin

    2016-02-23

    With the development of modern industry and modern economies, environmental problems, especially water pollution and water scarcity, have become the most serious global challenges. In dealing with these challenges, various kinds of functionalized materials and devices are purposefully developed, fabricated, and utilized. It is clear that smart materials have not only provided effective strategies for solving environmental problems, but have also exhibited unprecedented advantages over traditional materials by integrating multifunctions and/or processes into one advanced device/material. In this book, we will present a broad collection of bioinspired smart materials and systems that are used in environmental problem solving. The topics of these chapters span from bioinspired fog collection, self-healing materials, responsive particle-stabilized emulsions, smart draw solutions in forward osmosis, slippery coating, insightful analysis of problems and opportunities for hydrophobic surfaces applied in real conditions, to superwetting materials for oil-water separation.

  12. Tailored ceramics. Chapter 5

    International Nuclear Information System (INIS)

    Haker, A.B.

    1988-01-01

    In the light of the broad variation in US high-level waste (HLW) types and the uncertainties in future waste production, research on the Rockwell International Science Center has focussed on developing a generic technology for the consolidation of high-level wastes into polyphase ceramics. The basic approach has been to 'tailor' wste compositions with chemical additives so that upon consolidation a dense ceramic assemblage is formed that chemically binds the waste species into known phases. This chapter deals with tailored ceramics for current and future high-level waste compositions. Section 2 gives a historical review of the development of tailored ceramics. Section 3 deals with tailored ceramics designed for specific HLW compositions and with microstructure and phase development. Section 4 discusses chemical and physical properties of tailored ceramic waste forms. In section 5 the various processing steps involved in converting HLW to polycrystalline ceramic forms are described. (author). 159 refs.; 20 figs.; 14 tabs

  13. Chapter No.2. Legislation

    International Nuclear Information System (INIS)

    2002-01-01

    UJD as the central body of state administration prepares legislation within their competency and sets also binding criteria in the field of nuclear safety. Based on provisions of the 'Atomic Act' the preparation of rest regulations has continued. Following drafts of 5 were prepared regulations in 2001 and then they were sent for comments to various ministries by UJD: (a) Regulation on safety requirements for design of nuclear installations; (b) Regulation on safety requirements for commissioning and operation of nuclear installations; (c) Regulation on safety documentation; (d) Regulation on periodic safety assessment; (e) Regulation on safety requirements for siting of nuclear installations. Two following UJD safety guides were published in 2001 as the part of edition 'Safety of Nuclear Installations': (a) BNS I. 11.2/1999 'Requirements for performance of safety analyses for ATWS' (b) BNS II.3.1/2000 'Evaluation of acceptability of faults detected during the operation inspection of nuclear installation selected equipment'. As UJD is responsible for performance of such reviews according to law No. 264/1999 Coll. on conformance assessment of products about 10 drafts of technical standards were reviewed. UJD provided documentation to the Slovak Republic position document related to Chapter 14 - Energy which was submitted to the European Union (EU). The set of recommendations related to nuclear safety was elaborated by the special working group on atomic question which was established by the EU Council. Their implementation is required as a prerequisite to close negotiations on Chapter 14 - Energy. The schedule of necessary safety related measures was agreed in co-operation with the SE a.s. and the Ministry of Economy and submitted as additional information for negotiations to the EC. The negotiations on Chapter 14 - Energy were successfully closed in October 2001. The activities in the area of Chapter 22 - Environment were concentrated on submission of necessary data

  14. Nonlinear physics of plasmas. Spatiotemporal structures in strong turbulence. Lecture notes

    International Nuclear Information System (INIS)

    Skoric, Milos M.

    2008-05-01

    This material has been prepared and partly delivered in a series of lectures given at NIFS to Doctor course students of the SOKENDAI (Graduate University of Advanced Studies, Japan) in academic 2007/08 year. Special gratitude is due to colleagues for fruitful collaboration: Profs. K. Mima, Lj. Hadzievski, S. Ishiguro, A. Maluckov, M. Rajkovic and Dr Li Baiwen and Dr Lj. Nikolic, in particular, and to Prof. Mitsuo Kono for motivating the work on this text. I wish to pay unique tribute to close friends and longtime collaborators, Prof. Dik ter Haar and Prof. Moma Jovanovic who are no longer with us. This report contains Chapter 1 (Strong Langmur Turbulence), Chapter 2 (Wave Collapse in Plasmas), Chapter 3 (Spatiotemporal Complexity in Plasmas), Chapter 4 (Relativistic Plasma Interactions) and Chapter 5 (Ponderomotive Potential and Magnetization). (J.P.N.)

  15. 5th Paris-Princeton Lectures on Mathematical Finance

    CERN Document Server

    Benth, Fred Espen; Guasoni, Paolo; Manolarakis, Konstantinos; Muhle-Karbe, Johannes; Nee, Colm; Protter, Philip

    2013-01-01

    The current volume presents four chapters touching on some of the most important and modern areas of research in Mathematical Finance: asset price bubbles (by Philip Protter); energy markets (by Fred Espen Benth); investment under transaction costs (by Paolo Guasoni and Johannes Muhle-Karbe); and numerical methods for solving stochastic equations (by Dan Crisan, K. Manolarakis and C. Nee).The Paris-Princeton Lecture Notes on Mathematical Finance, of which this is the fifth volume, publish cutting-edge research in self-contained, expository articles from renowned specialists. The aim is to produce a series of articles that can serve as an introductory reference source for research in the field.

  16. New alloying systems for ferrous powder metallurgy precision parts

    Directory of Open Access Journals (Sweden)

    Danninger H.

    2008-01-01

    Full Text Available Traditionally, the common alloy elements for sintered steels have been Cu and Ni. With increasing requirements towards mechanical properties, and also as a consequence of soaring prices especially for these two metals, other alloy elements have also become more and more attractive for sintered steels, which make the steels however more tricky to process through PM. Here, the chances and risks of using in particular Cr and Mn alloy steels are discussed, considering the different alloying techniques viable in powder metallurgy, and it is shown that there are specific requirements in particular for sintering process. The critical importance of chemical reactions between the metal and the atmosphere is described, and it is shown that not only O2 and H2O but also H2 and even N2 can critically affect sintering and microstructural homogenization.

  17. Stress analyses of pump gears produced by powder metallurgy

    Energy Technology Data Exchange (ETDEWEB)

    Cetinel, Hakan [Celal Bayar Univ., Mechanical Engineering Dept. (Turkey); Yilmaz, Burak

    2013-06-01

    In this study, trochoidal type (gerotor) hydraulic pump gears were produced by powder metallurgy (P/M) technique. Several gears with different mechanical properties have been obtained by changing process variables. The tooth contact stresses were calculated analytically under particular operation conditions of the hydraulic pump. The 3D models have been obtained from real gears by using Capability Maturity Model (CMM, 3D scanning) operation and SOLIDWORKS software. Stress analyses were conducted on these 3D models by using ANSYS WORKBENCH software. It was found that the density increases by the increase of sintering duration and mechanical properties were positively affected by the increase of density. Maximum deformation takes place in the region of the outer gear where failure generally occurs with the minimum cross-section area.

  18. An application of powder metallurgy for the LHC

    CERN Document Server

    Sgobba, Stefano

    2004-01-01

    The cold mass of the 1232 superconducting dipole magnets of LHC, operating at 1.9 K, is enclosed by a shrinking cylinder and two end covers at its extremities. The covers are structural components that must retain high strength and toughness at cryogenic temperature. They are manufactured by Metso Oy /FI in AISI 316 LN steel by Powder Metallurgy (PM) and Hot Isostatic Pressing. PM represents an attractive near net shaping technique for these components of complex geometry for which dimension tolerances, dimensional stability, weldability are key issues for magnet fabrication, and mechanical properties, ductility and leak tightness have to be guaranteed during operation. The material of the covers and its welds have been fully characterized and mechanically tested down to 4.2 K at CERN. The fine grained structure, the absence of residual stresses, the full isotropy of mechanical properties associated to the low level of Prior Particle Boundaries oxides result in superior mechanical properties and high ductilit...

  19. N18, powder metallurgy superalloy for disks: Development and applications

    Energy Technology Data Exchange (ETDEWEB)

    Guedou, J.Y.; Lautridou, J.C.; Honnorat, Y. (SNECMA, Evry (France). Materials and Processes Dept.)

    1993-08-01

    The preliminary industrial development of a powder metallurgy (PM) superalloy, designated N18, for disk applications has been completed. This alloy exhibits good overall mechanical properties after appropriate processing of the material. These properties have been measured on both isothermally forged and extruded billets, as well as on specimens cut from actual parts. The temperature capability of the alloy is about 700 C for long-term applications and approximately 750 C for short-term use because of microstructural instability. Further improvements in creep and crack propagation properties, without significant reduction in tensile strength, are possible through appropriate thermomechanical processing, which results in a large controlled grain size. Spin pit tests on subscale disks have confirmed that the N18 alloy has a higher resistance than PM Astrology and is therefore an excellent alloy for modern turbine disk applications.

  20. Powder metallurgy: Solid and liquid phase sintering of copper

    Science.gov (United States)

    Sheldon, Rex; Weiser, Martin W.

    1993-01-01

    Basic powder metallurgy (P/M) principles and techniques are presented in this laboratory experiment. A copper based system is used since it is relatively easy to work with and is commercially important. In addition to standard solid state sintering, small quantities of low melting metals such as tin, zinc, lead, and aluminum can be added to demonstrate liquid phase sintering and alloy formation. The Taguchi Method of experimental design was used to study the effect of particle size, pressing force, sintering temperature, and sintering time. These parameters can be easily changed to incorporate liquid phase sintering effects and some guidelines for such substitutions are presented. The experiment is typically carried out over a period of three weeks.

  1. Advanced powder metallurgy aluminum alloys via rapid solidification technology

    Science.gov (United States)

    Ray, R.

    1984-01-01

    Aluminum alloys containing 10 to 11.5 wt. pct. of iron and 1.5 to 3 wt. pct. of chromium using the technique of rapid solidification powder metallurgy were studied. Alloys were prepared as thin ribbons (.002 inch thick) rapidly solidified at uniform rate of 10(6) C/second by the melt spinning process. The melt spun ribbons were pulverized into powders (-60 to 400 mesh) by a rotating hammer mill. The powders were consolidated by hot extrusion at a high reduction ratio of 50:1. The powder extrusion temperature was varied to determine the range of desirable processing conditions necessary to yield useful properties. Powders and consolidated alloys were characterized by SEM and optical metallography. The consolidated alloys were evaluated for (1) thermal stability, (2) tensile properties in the range, room temperature to 450 F, and (3) notch toughness in the range, room temperature to 450 F.

  2. Practical strategies for effective lectures.

    Science.gov (United States)

    Lenz, Peter H; McCallister, Jennifer W; Luks, Andrew M; Le, Tao T; Fessler, Henry E

    2015-04-01

    Lecturing is an essential teaching skill for scientists and health care professionals in pulmonary, critical care, and sleep medicine. However, few medical or scientific educators have received training in contemporary techniques or technology for large audience presentation. Interactive lecturing outperforms traditional, passive-style lecturing in educational outcomes, and is being increasingly incorporated into large group presentations. Evidence-based techniques range from the very simple, such as inserting pauses for audience discussion, to more technologically advanced approaches such as electronic audience response systems. Alternative software platforms such as Prezi can overcome some of the visual limits that the ubiquitous PowerPoint imposes on complex scientific narratives, and newer technology formats can help foster the interactive learning environment. Regardless of the technology, adherence to good principles of instructional design, multimedia learning, visualization of quantitative data, and informational public speaking can improve any lecture. The storyline must be clear, logical, and simplified compared with how it might be prepared for scientific publication. Succinct outline and summary slides can provide a roadmap for the audience. Changes of pace, and summaries or other cognitive breaks inserted every 15-20 minutes can renew attention. Graphics that emphasize clear, digestible data graphs or images over tables, and simple, focused tables over text slides, are more readily absorbed. Text slides should minimize words, using simple fonts in colors that contrast to a plain background. Adherence to these well-established principles and addition of some new approaches and technologies will yield an engaging lecture worth attending.

  3. Exploring medical student decisions regarding attending live lectures and using recorded lectures.

    Science.gov (United States)

    Gupta, Anmol; Saks, Norma Susswein

    2013-09-01

    Student decisions about lecture attendance are based on anticipated effect on learning. Factors involved in decision-making, the use of recorded lectures and their effect on lecture attendance, all warrant investigation. This study was designed to identify factors in student decisions to attend live lectures, ways in which students use recorded lectures, and if their use affects live lecture attendance. A total of 213 first (M1) and second year (M2) medical students completed a survey about lecture attendance, and rated factors related to decisions to attend live lectures and to utilize recorded lectures. Responses were analyzed overall and by class year and gender. M1 attended a higher percentage of live lectures than M2, while both classes used the same percentage of recorded lectures. Females attended more live lectures, and used a smaller percentage of recorded lectures. The lecturer was a key in attendance decisions. Also considered were the subject and availability of other learning materials. Students use recorded lectures as replacement for live lectures and as supplement to them. Lectures, both live and recorded, are important for student learning. Decisions about lecture placement in the curriculum need to be based on course content and lecturer quality.

  4. Career development through local chapter involvement: perspectives from chapter members.

    Science.gov (United States)

    Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

    2013-07-01

    The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association.

  5. Eight lectures on theoretical physics

    CERN Document Server

    Planck, Max

    1997-01-01

    In 1909 the great German physicist and Nobel Prize winner Max Planck (1858-1947) delivered a series of eight lectures at Columbia University giving a fascinating overview of the new state of physics, which he had played a crucial role in bringing about. The first, third, fifth, and sixth lectures present his account of the revolutionary developments occasioned when he first applied the quantum hypothesis to blackbody radiation. The reader is given an invaluable opportunity to witness Planck's thought processes both on the level of philosophical principles as well as their application to physi

  6. Lectures on strings and dualities

    International Nuclear Information System (INIS)

    Vafa, C.

    1997-01-01

    In this set of lectures I review recent developments in string theory emphasizing their non-perturbative aspects and their recently discovered duality symmetries. The goal of the lectures is to make the recent exciting developments in string theory accessible to those with no previous background in string theory who wish to join the research effort in this area. Topics covered include a brief review of string theory, its compactifications, solitons and D-branes, black hole entropy and wed of string dualities. (author)

  7. Chapter 11. Heat Exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.; Culver, Gene

    1998-01-01

    Most geothermal fluids, because of their elevated temperature, contain a variety of dissolved chemicals. These chemicals are frequently corrosive toward standard materials of construction. As a result, it is advisable in most cases to isolate the geothermal fluid from the process to which heat is being transferred. The task of heat transfer from the geothermal fluid to a closed process loop is most often handled by a plate heat exchanger. The two most common types used in geothermal applications are: bolted and brazed. For smaller systems, in geothermal resource areas of a specific character, downhole heat exchangers (DHEs) provide a unique means of heat extraction. These devices eliminate the requirement for physical removal of fluid from the well. For this reason, DHE-based systems avoid entirely the environmental and practical problems associated with fluid disposal. Shell and tube heat exchangers play only a minor role in low-temperature, direct-use systems. These units have been in common use in industrial applications for many years and, as a result, are well understood. For these reasons, shell and tube heat exchangers will not be covered in this chapter.

  8. Xenobiotics: Chapter 15

    Science.gov (United States)

    Bridges, Christine M.; Semlitsch, Raymond D.; Lannoo, Michael

    2005-01-01

    While a number of compounds have been reported as toxic to amphibians, until recently, there have been conspicuously few ecotoxicological studies concerning amphibians. Studies are now focusing on the effects of xenobiotics on amphibians, an interest likely stimulated by widespread reports of amphibian declines. It has been speculated that chemical contamination may be partially to blame for some documented amphibian declines, by disrupting growth, reproduction, and behavior. However, evidence that xenobiotics are directly to blame for population declines is sparse because environmental concentrations are typically not great enough to generate direct mortality. Although the effects of environmental contaminants on the amphibian immune system are currently unknown, it is possible that exposure to stressors such as organic pollutants (which enter ecosystems in the form of pesticides) may depress immune system function, thus allowing greater susceptibility to fungal infections. This chapter discusses toxicity testing for xenobiotics and presents the results of a study that has focused on the subtle effects of sublethal concentrations of the chemical carbaryl on tadpoles.

  9. Towards the next chapter

    CERN Multimedia

    2013-01-01

    In the late 1970s, while the CERN community was busy preparing the SPS to operate as a collider and planning for LEP, people also had their eyes on the next chapter in the unfolding story of CERN.   That the LEP tunnel should be built with a future hadron collider in mind was a given by the end of the decade. But there had also been proposals to build large proton storage rings, or re-equip the ISR with superconducting magnets. Some people had suggested building an electron-proton collider at CERN, and there were ambitious plans looking far into the future at a possible Very Big Accelerator to be built somewhere in the world, which went by its acronym VBA. For the field of particle physics, with its very long lead times, this is part of the normal cycle, and while most of those options never came to fruition, this process did pave the way for the LHC. Today, with the LHC programme underway, the time has come for CERN to start seriously considering the options for its post-LHC future. Perhaps ...

  10. Synthesis: Chapter 19

    Science.gov (United States)

    Pardo, L.H.; Geiser, L.H.; Fenn, M.E.; Driscoll, C.T.; Goodale, C.L.; Allen, E.B.; Baron, Jill S.; Bobbink, R.; Bowman, W.D.; Clark, C.M.; Emmett, B.; Gilliam, F.S.; Greaver, T.; Hall, S.J.; Lilleskov, E.A.; Liu, L.; Lynch, J.A.; Nadelhoffer, K.; Perakis, S.S.; Robin-Abbott, M. J.; Stoddard, J.L.; Weathers, K. C.

    2011-01-01

    Human activity in the last century has led to a substantial increase in nitrogen (N) emissions and deposition (Galloway et al. 2003). Because of past, and, in some regions, continuing increases in emissions (Lehmann et al. 2005, Nilles and Conley 2001), this N deposition has reached a level that has caused or is likely to cause alterations and damage in many ecosystems across the United States. In some ecoregions, the impact of N deposition has been severe and has changed the biotic community structure and composition of ecosystems. In the Mediterranean California ecoregion, for example (see Chapter 13), replacement of native by exotic invasive vegetation is accelerated because exotic species are often more productive under elevated N deposition than native species in some California grasslands, coastal sage scrub, and desert scrub (Fenn et al. 2010, Rao and Allen 2010, Rao et al. 2010, Weiss 1999, Yoshida and Allen 2004). Such shifts in plant community composition and species richness can have consequences beyond changes in ecosystem structure: shifts may lead to overall losses in biodiversity and further impair particular threatened or endangered species (Stevens et al. 2004). Th e extirpation of the endangered checkerspot butterfl y (Euphydryas editha bayensis), because the host plant for the larval stage disappears in N-enriched ecosystems (Fenn et al. 2010, Weiss 1999), is just one example of the detrimental impacts of elevated N deposition.

  11. Uranium mining and metallurgy library information service under the network environment

    International Nuclear Information System (INIS)

    Tang Lilei

    2012-01-01

    This paper analyzes the effect of the network environment on the uranium mining and metallurgy of the information service. Introduces some measures such as strengthening professional characteristic literature resources construction, changing the service mode, building up information navigation, deepening service, meet the individual needs of users, raising librarian's quality, promoting the co-construction and sharing of library information resources, and puts forward the development idea of uranium mining and metallurgy library information service under the network environment. (author)

  12. Lecture attendance improves success in medical physiology.

    Science.gov (United States)

    Demir, Enver Ahmet; Tutuk, Okan; Dogan, Hatice; Egeli, Duygu; Tumer, Cemil

    2017-12-01

    The educators have underlined the importance of lecture attendance for decades. Nowadays, students have ample online educational sources, which began a debate on the necessity of in-class lectures. In the present study, we investigated the influence of lecture attendance on the exam success. To this aim, we adopted a novel approach and matched second-year medicine students' answers in three interim exams with the lectures related to those questions. Thereby, we were able to evaluate if attending lectures increases the chance of giving a correct answer to the exam question generated from the attended lecture. Furthermore, we examined students who had never taken the course before (first-time takers) and students who had failed and repeated the course (repeat takers) separately, since repeat takers may have attended a lecture previously. We found that first-time takers attended more lectures and gained higher total scores than repeat takers. Lecture-matched correct answers were significantly higher for attended lectures than for skipped lectures in all interim exams. Moreover, the correlation analyses revealed that the number of correct answers increases by lecture attendance in both first-time and repeat takers. These results indicate that in-class lectures still should be considered as an essential part of the medical physiology education, even in the internet era. Copyright © 2017 the American Physiological Society.

  13. Chapter 3. Legislation

    International Nuclear Information System (INIS)

    2001-01-01

    The Nuclear Regulatory Authority of the Slovak Republic (UJD) as the central authority of state administration prepares legislation within their competency and sets also binding criteria in the field of nuclear safety. Based on provisions of the 'Atomic Act' a preparation of remaining 8 decrees have continued. In 2000 the following decrees were issued by UJD: (1) Decree No. 31/2000 Coll on events at nuclear installations. It came into force on 15 February 2000. (2) Decree No. 190/2000 Coll by which details of radioactive waste management and spent fuel management are regulated. It came into force on 1-st July 2000. The following six decrees are at the process of preparation: (a) Decree on quality assurance of nuclear installations, (b) Decree on safety requirements for design of nuclear installations, (c) Decree on safety requirements for commissioning and operation of nuclear installations, (d) Decree on safety documentation, (e) Decree on periodic safety assessment, (f) Decree on safety requirements for siting of nuclear installations. Following five UJD safety guides were published in 2000 as the part of edition 'Safety of Nuclear Installations': (1) BNS I.9.1/1999 Safety of nuclear facilities during decommissioning (issued in April 2000). (2) BNS III.4.1/2000 Requirements on UJD SR permit issue for fuel use in WWER 440 reactors (issued in September 2000). (3) BNS III.4.3/2000 Requirements on assessment of fuel loading for WWER 440 reactors (issued in September 2000). (4) BNS I.2.6/2000 UJD SR requirements on chapter 4 of Safety analysis report 'Core design' (issued in September 2000). (5) NS I.4.2/1996 Use of PSA methodology in the process of regulation by regulatory authority (issued in September 2000). About thirty-five drafts of technical standards were reviewed as UJD is responsible for performance such review according to the law No. 264/1999 Coll. on conformance assessment of products. UJD provided necessary documentation for negotiation positions of the

  14. Production of uranium in Navoi Mining and Metallurgy Combinat, Uzbekistan

    International Nuclear Information System (INIS)

    Kuchersky, N.; Tolstov, E.A.; Mazurkevich, A.P.; Inozemzev, S.B.

    2001-01-01

    Full text: Under the conditions of constantly increasing level of development of the nuclear power, it is inevitable that the uranium stockpiles accumulated to 1985 will soon be depleted. This consideration underlies the development concept of uranium production in the Navoi Mining and Metallurgy Combinat, Uzbekistan. Because this product has become a source of hard currency revenues for the Republic, there will be a significant increase in the processed ore and output of uranium oxide within the next few years. Uranium production in the Navoi Mining and Metallurgy Combinat represents a full-cycle operations ranging from geological survey through hydrometallurgical processing resulting in the output of uranium concentrate in the form of uranium protoxide-oxide (U 3 O 8 ). The NMMC uranium operations include the Hydrometallurgical Plant and three facilities accomplishing ISL mining facilities. A successful start on the development of the Uchkuduk deposit by ISL method in the 1960s gave rise to scientific and production approach for development of other uranium deposits of the infiltration bedded (sandstone) type. Uranium recovery by ISL has become a separate mining branch within the 30-year period of its history and the contribution of this branch in uranium production has steadily grown. Since 1995 all uranium produced by Navoi Mining and Metallurgy Combinat is attributed to ISL. During this evolution period of the ISL method, a whole range of systematic scientific research and practical works were carried out covering improvement of process flowsheets, equipment, operational methods and techniques for particular mining conditions at those specific sites. In co-operation with design and scientific research institutions, a significant number of scientific researches, test works, design and engineering projects were achieved in order to create optimal conditions for ISL mining and further processing of pregnant solutions by sorption as well as to appropriately equip

  15. Collective Intelligence. Chapter 17

    Science.gov (United States)

    Wolpert, David H.

    2003-01-01

    Many systems of self-interested agents have an associated performance criterion that rates the dynamic behavior of the overall system. This chapter presents an introduction to the science of such systems. Formally, collectives are defined as any system having the following two characteristics: First, the system must contain one or more agents each of which we view as trying to maximize an associated private utility; second, the system must have an associated world utility function that rates the possible behaviors of that overall system. In practice, collectives are often very large, distributed, and support little, if any, centralized communication and control, although those characteristics are not part of their formal definition. A naturally occurring example of a collective is a human economy. One can identify the agents and their private utilities as the human individuals in the economy and the associated personal rewards they are each trying to maximize. One could then identify the world utility as the time average of the gross domestic product. ("World utility" per se is not a construction internal to a human economy, but rather something defined from the outside.) To achieve high world utility it is necessary to avoid having the agents work at cross-purposes lest phenomena like liquidity traps or the Tragedy of the Commons (TOC) occur, in which agents' individually pursuing their private utilities lowers world utility. The obvious way to avoid such phenomena is by modifying the agents utility functions to be "aligned" with the world utility. This can be done via punitive legislation. A real-world example of an attempt to do this was the creation of antitrust regulations designed to prevent monopolistic practices.

  16. Development and application of characteristic database for uranium mining and metallurgy in the library of Beijing Research Institute of Chemical Engineering and Metallurgy

    International Nuclear Information System (INIS)

    Gao Renxi

    2012-01-01

    Beijing Research Institute of Chemical Engineering and Metallurgy (BRICEM) is a multi disciplinary comprehensive research institute engaged in uranium mining, engineering design and related material researches. After 53 years of researches and development, BRICEM has accumulated a plenty of valuable data and resources. By analyzing the actual conditions of BRICEM's technological database, this thesis aims to propose the idea of building a characteristic database for uranium mining and metallurgy. It gives an in-depth analysis on content design, development status and problems of database development, in order to come up with solutions to these problems, as well as suggestions on the future development plans of the characteristic database. (author)

  17. Six Lectures on Commutative Algebra

    CERN Document Server

    Elias, J; Miro-Roig, Rosa Maria; Zarzuela, Santiago

    2009-01-01

    Interest in commutative algebra has surged over the years. In order to survey and highlight the developments in this rapidly expanding field, the Centre de Recerca Matematica in Bellaterra organized a ten-days Summer School on Commutative Algebra in 1996. This title offers a synthesis of the lectures presented at the Summer School

  18. Teaching more by lecturing less.

    Science.gov (United States)

    Knight, Jennifer K; Wood, William B

    2005-01-01

    We carried out an experiment to determine whether student learning gains in a large, traditionally taught, upper-division lecture course in developmental biology could be increased by partially changing to a more interactive classroom format. In two successive semesters, we presented the same course syllabus using different teaching styles: in fall 2003, the traditional lecture format; and in spring 2004, decreased lecturing and addition of student participation and cooperative problem solving during class time, including frequent in-class assessment of understanding. We used performance on pretests and posttests, and on homework problems to estimate and compare student learning gains between the two semesters. Our results indicated significantly higher learning gains and better conceptual understanding in the more interactive course. To assess reproducibility of these effects, we repeated the interactive course in spring 2005 with similar results. Our findings parallel results of similar teaching-style comparisons made in other disciplines. On the basis of this evidence, we propose a general model for teaching large biology courses that incorporates interactive engagement and cooperative work in place of some lecturing, while retaining course content by demanding greater student responsibility for learning outside of class.

  19. Koshiba, Tanaka give Nobel lectures

    CERN Multimedia

    2002-01-01

    Masatoshi Kosiba and Koichi Tanaka presented lectures in English on Sunday, touching on topics ranging from particle physics, to teamwork to commemorate their reception of this year's Nobel Prize for Physics and Chemistry. The two will receive their respective prizes in an awards ceremony scheduled for Tuesday (1 page).

  20. Bayesian Data Analysis (lecture 1)

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    framework but we will also go into more detail and discuss for example the role of the prior. The second part of the lecture will cover further examples and applications that heavily rely on the bayesian approach, as well as some computational tools needed to perform a bayesian analysis.

  1. Bayesian Data Analysis (lecture 2)

    CERN Multimedia

    CERN. Geneva

    2018-01-01

    framework but we will also go into more detail and discuss for example the role of the prior. The second part of the lecture will cover further examples and applications that heavily rely on the bayesian approach, as well as some computational tools needed to perform a bayesian analysis.

  2. DR. MIKA MAJALE MEMORIAL LECTURE

    African Journals Online (AJOL)

    Presented at the Kenya Orthopaedic Association 8th AGM and 7th Scientific Conference At Whitesands Hotel,. Mombasa 24th – 26th June 2015. INTRODUCTION. The Mika Majale lecture is ... Kadimbworo village in the then Samia location of. Busia District which was part of North Nyanza. His father was Matayo Makanga ...

  3. Lecture I. Introduction to charm

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Lectures are given on some manifestations of charm and some characteristics of the charmed particle. Various points of view in a cultural orientation, leptons, reasons for a belief in quarks, gauge theories of weak and electromagnetic and strong interactions, and lastly the viewpoint that there is not a systhesis at hand, but instead chaos are treated. 6 references

  4. Applied Fluid Mechanics. Lecture Notes.

    Science.gov (United States)

    Gregg, Newton D.

    This set of lecture notes is used as a supplemental text for the teaching of fluid dynamics, as one component of a thermodynamics course for engineering technologists. The major text for the course covered basic fluids concepts such as pressure, mass flow, and specific weight. The objective of this document was to present additional fluids…

  5. PEER INTERACTIONS AND POSITIVE STUDENT-LECTURER ...

    African Journals Online (AJOL)

    PEER INTERACTIONS AND POSITIVE STUDENT-LECTURER RELATIONSHIP AS A TOOL FOR IMPROVING THE TEACHING AND LEARNING OF COLLEGE ALGEBRA: A CASE STUDY AT USIU. ... Key words: Mathematics, Peer interaction, Lecturer-Student relationship, challenges, teaching, learning and performance.

  6. Public Lecture: The Odyssey of Voyager

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Should you wish to attend to this lecture only (and not the full colloquium), please register here: https://indico.cern.ch/event/387001/registration/ Participants to the full colloquium are automatically registered to the public lectures.

  7. Lectures on the inverse scattering method

    International Nuclear Information System (INIS)

    Zakharov, V.E.

    1983-06-01

    In a series of six lectures an elementary introduction to the theory of inverse scattering is given. The first four lectures contain a detailed theory of solitons in the framework of the KdV equation, together with the inverse scattering theory of the one-dimensional Schroedinger equation. In the fifth lecture the dressing method is described, while the sixth lecture gives a brief review of the equations soluble by the inverse scattering method. (author)

  8. Production of titanium alloys for medical implants by powder metallurgy

    Energy Technology Data Exchange (ETDEWEB)

    Henriques, V.A.R. [Dept. de Engenharia de Materiais, Faculdade de Engenharia Quimica de Lorena, Lorena SP (Brazil); Silva, C.R.M. da [Div. de Materiais, CTA-IAE-AMR, Sao Jose dos Campos SP (Brazil)

    2001-07-01

    Titanium alloys are expected to be much more widely used for implant materials in the medical and dental fields because of their superior biocompatibility, corrosion resistance and specific strength compared with other metallic implant materials. Vanadium free alloys like Ti-6Al-7Nb and Ti-5Al-2,5Fe have been recently developed for biomedical use. More recently vanadium and aluminum free alloys composed of non-toxic elements like Nb, Ta, Zr and so on with lower modulus have been started to be developed. The {beta} type alloys like Ti-15Mo are now the main target for medical materials. A blended elemental titanium powder metallurgy process has been developed to offer low cost products. The process employs hydride-dehydride (HDH) powders and near-net shape techniques. In this work, the influence of the processing parameters and chemical composition of the elementary powders on the final microstructure was investigated. The alloys were characterized by means of scanning electron microscopy, X-ray diffraction, Vickers microhardness measurements, chemical analysis and density. The results indicate that the samples presented high densification, homogeneous chemical composition and coherent microstructures. The process parameters were defined aiming to reduce the interstitial pick-up (O, N) and to avoid the grain growth. (orig.)

  9. The traces of roman metallurgy in Eastern Serbia

    Directory of Open Access Journals (Sweden)

    Petković Sofija

    2009-01-01

    Full Text Available The archaeological traces of the Roman mining and metallurgy in eastern Serbia are rather frequent but insufficiently studied and published. Three mining-metallurgical regions abounding in gold, silver, copper, iron and lead could be distinguished there: 1. the upper course of the Pek river, metalla Pincensia, 2. the area between Bor, Zlot, Crna Reka and Rgotina and 3. the area in the river basin of Beli Timok, two latter ones had been organized as territoria metallorum. The archeometallurgical sites confirmed by investigations are: Kraku lu Jordan at the confluence of the Brodica river and the Pek river, Rudna Glava, Tilva Roš in Bor, Gamzigrad - Romuliana, Rgotina near Zaječar and Timacum Minus in the village Ravna near Knjaževac. Roman mining-metallurgical activities in eastern Serbia flourished from the end of the 3rd century, were interrupted by the invasion of Huns in AD 441. and restored in the time of emperors Anastasius and Justin I, in the end of the 5th - beginning of the 6th centuries. The Roman mining-metallurgical centers functioned in the 6th century until the Slav invasion in the beginning of the 7th century.

  10. Wear mechanisms in powder metallurgy high speed steels matrix composites

    International Nuclear Information System (INIS)

    Gordo, E.; Martinez, M. A.; Torralba, J. M.; Jimenez, J. A.

    2001-01-01

    The development of metal matrix composites has a major interest for automotive and cutting tools industries since they possess better mechanical properties and wear resistance than corresponding base materials. One of the manufacturing methods for these materials includes processing by powder metallurgy techniques. in this case, blending of both, base material and reinforcement powders constitute the most important process in order to achieve a homogeneous distribution of second phase particles. in the present work, composite materials of M3/2 tool steel reinforced with 2.5,5 and 8 vol% of niobium carbide have been prepared. In order to ensure a homogeneous mix, powders of both materials were mixed by dry high-energy mechanical milling at 200 r.p.m. for 40 h. After a recovering annealing, two routes for consolidate were followed die pressing and vacuum sintering, and hot isostatic pressing (HIP). Pin-on-disc tests were carried out to evaluate wear behaviour in all the materials. Results show that ceramic particles additions improve wear resistance of base material. (Author) 9 refs

  11. [Possible health effects associated with Pre-Columbian metallurgy].

    Science.gov (United States)

    Idrovo, Alvaro Javier

    2005-09-01

    In the Old World, several researchers have indicated that adverse health effects were associated with exposure to arsenic, and that this influenced a change in the use of copper-arsenic alloys to others less toxic. This hypothesis was evaluated for three Pre-Columbian metallurgy traditions: Central Andes, Intermediate Area, and West Mexico. The metal artifacts from the Central Andes showed arsenic concentrations similar to those in the Old World (0.5%-1.0%). In the Intermediate Area the values were smallest; however, in West Mexico the arsenic content was very high (7%-25%). In Central Andes arsenical bronze was used initially, but copper-tin alloys when introduced were preferred and distributed throughout the Inca Empire. Osteological and artistic evidences of foot amputations among Moche individuals from Central Andes support the presence of "black foot disease" (a condition associated with arsenic poisoning) among Pre-Columbian populations. In conclusion, the adverse effects of arsenic have been observed in the New World, and that these effects promoted a change toward the use of less toxic alloys.

  12. Indexation Rules for Metallurgy in PASCAL. Original Title: Regles d'Indexation de la Metallurgie'--Technical Note Issued by Informascience--January 1980. Translated by Marie Wallin.

    Science.gov (United States)

    Royal Inst. of Tech., Stockholm (Sweden). Library.

    The indexing rules presented are designed for use with a new French-German database on metallurgy being developed under an agreement by CNRS (Centre National de la Recherche Scientifique, Paris) and BAM (Bundesanstalt fur Materialprufung, Berlin). The new database, which will feature multilingual titles and index terms (French-German-English-) and…

  13. Chapter 10. Emergency preparedness

    International Nuclear Information System (INIS)

    2001-01-01

    incidents and accident in all European countries. A development and adaptation to conditions of the Slovak Republic are carried out in frame of tasks of the project Science and Technique Development. The RODOS system will provide a support during the decision making process for all authorities and organisations included in emergency planning on the state level. Concerning IAEA a co-operation in the area of a realisation of regional project RER/9/050 - Harmonisation in Emergency Planning for countries of Central and Eastern Europe continued intensively. In frame of this project a second national seminar focused on emergency monitoring issues was held, which was organised for both Slovak and Czech Republics. Also the EU project OSEP (Off Site Emergency Planning) which was co-ordinated by UJD was concentrated on protection of population had a similar objective. Several UJD staff members acted actively in this project as lecturers. This project was successfully finished in July 2000. In frame of project 'Science and Technique Development' the solution of the task 'Development of Techniques and Software Tools for Analysis of Accidents and Unusual Situations' continued. This task was successfully finished in 2000. At the same time a solution of the task 'Further Development and Preparation of Incorporation of RODOS System to an Emergency Planning and Emergency Management in the Slovak Republic' started. It is to be mentioned that UJD prepared the first draft of National Emergency Plan of the Slovak Republic, which would be submitted, to the National Emergency Commission for Radiation Accidents for an approval by the end of 2001

  14. American Red Cross Chapter Regions

    Data.gov (United States)

    Department of Homeland Security — The Regions are part of the national field level structure to support chapters. The Regions role is admistrative as well as provides oversight and program technical...

  15. Water Technology Lecture 1: Introducing Water Technology

    OpenAIRE

    Gray, Nicholas Frederick

    2017-01-01

    This is a full set of PowerPoint lectures for a course in Water Technology currently given at Trinity College, University of Dublin by professor N.F. Gray. The lectures cover all aspects of water and wastewater treatment and are available for use to lecturers or those interested in the subject. The lecture series is to be used in conjunction with the new textbook ?Water Science and Technology? (4th edition) published by CRC Press in 2017. Lecture 1 is an introduction to the water indust...

  16. ACADEMIC TRAINING LECTURES-QUESTIONNAIRE

    CERN Multimedia

    Françoise Benz

    2004-01-01

    ACADEMIC TRAINING Françoise Benz tel. 73127 academic.training@cern.ch SUGGEST AND WIN! Its time to plan the 2004-2005 lecture series. From today until March 19 you have the chance to give your contribution to planning for next year's Academic Training Lecture Series. At the web site: http://cern.ch/Academic.Training/questionnaire you will find questionnaires proposing topics in high energy physics, applied physics and science and society. Answering the questionnaire will help ensure that the selected topics are as close as possible to your interests. In particular requests and comments from students will be much appreciated. To encourage your contribution, the AT Committee will reward one lucky winner with a small prize, a 50 CHF coupon for a book purchase at the CERN bookshop.

  17. [Learning strategies and computer lectures].

    Science.gov (United States)

    Lafont, Pascale; Marchand, Claire; Crozet, Cyril

    2012-12-01

    French nurse schools use more and more frequently scanned lecture courses because of their partnership with universities. This study was aimed to identify the training strategies set up by nursing students with regard to lecture courses given by CD-ROM/DVD, as well as their perceptions of such an educational system. 88 nursing students (second semester) answered a questionnaire; 62 were collected, from which a frequency study was led. Students attempt to set up in-depth training strategies but do not succeed significantly and spare much efforts. It does result discouragement with lack of motivation in regard to their training. Using CD-ROM without adapted didactic environment disturb the development of requested training strategies compared to socio-constructivist principles it does refer to.

  18. Academic Training Lecture - Regular Programme

    CERN Multimedia

    PH Department

    2010-01-01

    Tuesday 25 & Wednesday 26 May 2010 from 11:00 to 12:30 - Main Auditorium, Bldg. 500-1-001 Baryon Asymmetry of the Universe by Prof. Hitoshi Murayama (University of California, Berkeley) In two lectures, the following topics will be discussed: (1) Why baryon asymmetry is a problem at all (2) Review of the Sakharov's conditions (3) Why old models based on GUT did not work (4) Electroweak baryogenesis (5) Leptogenesis (6) Connections to the near-future experiments

  19. Lectures on the electroweak interactions

    CERN Document Server

    Barbieri, Riccardo

    2007-01-01

    Elementary particle physics is the quadrant of nature whose laws can be written in a few lines with absolute precision and the greatest empirical adequacy. If this is the case, as I believe it is, it must be possible and is probably useful to introduce the students and the interested readers to the entire subject in a compact way. This is the main aim of these Lectures.

  20. Lectures in medical educaton: what students think?

    Science.gov (United States)

    Mustafa, Tajammal; Farooq, Zerwa; Asad, Zunaira; Amjad, Rabbia; Badar, Iffat; Chaudhry, Abdul Majeed; Khan, Mohammad Amer Zaman; Rafique, Farida

    2014-01-01

    The volume of medical knowledge has increased exponentially and so has the need to improve the efficiency of current teaching practices.With increasing emphasis on interactive and problem based learning, the place of lectures in modern medical education has become a questionable issue. Objectives were to assess the perspective of undergraduate medical students regarding the role and effectiveness of lectures as a mode of instruction as well as the ways and means that can be employed to enhance the effectiveness of lectures. A cross sectional study was carried out among 2nd to final year medical students from five medical colleges including both private and public sector institutions. A total of 347 students participated by completing a structured questionnaire. Data was analyzed using SPSS-17. Sixty seven percent students considered lectures as a useful mode of instruction (47% males and 77% females), whereas 83% of the students reported that clinical sessions were superior to lectures because of small number of students in clinical sessions, active student participation, enhanced clinical orientation, and interaction with patients. About 64% responded that lectures should be replaced by clinical sessions. Majority of the students (92%) reported not being able to concentrate during a lecture beyond 30 minutes, whereas 70% skipped lectures as they were boring. A significantly greater proportion of male respondents, students from clinical years, and those who skipped lectures, considered lectures to be boring, a poor utilization of time and resources, and could not concentrate for the full duration of a lecture compared to females, students from preclinical years, and those who do not skip lectures, respectively. Lecturing techniques need to be improvised. The traditional passive mode of instruction has to be replaced with active learning and inquiry based approach to adequately utilize the time and resources spent on lectures.

  1. [Atmospheric emission of PCDD/Fs from secondary aluminum metallurgy industry in the southwest area, China].

    Science.gov (United States)

    Lu, Yi; Zhang, Xiao-Ling; Guo, Zhi-Shun; Jian, Chuan; Zhu, Ming-Ji; Deng, Li; Sun, Jing; Zhang, Qin

    2014-01-01

    Five secondary aluminum metallurgy enterprises in the southwest area of China were measured for emissions of PCDD/Fs. The results indicated that the emission levels of PCDD/Fs (as TEQ) were 0.015-0.16 ng x m(-3), and the average was 0.093 ng x m(-3) from secondary aluminum metallurgy enterprises. Emission factors of PCDD/Fs (as TEQ) from the five secondary aluminum metallurgy enterprises varied between 0.041 and 4.68 microg x t(-1) aluminum, and the average was 2.01 microg x t(-1) aluminum; among them, PCDD/Fs emission factors from the crucible smelting furnace was the highest. Congener distribution of PCDD/F in stack gas from the five secondary aluminum metallurgies was very different from each other. Moreover, the R(PCDF/PCDD) was the lowest in the enterprise which was installed only with bag filters; the R(PCDF/PCDD) were 3.8-12.6 (the average, 7.7) in the others which were installed with water scrubbers. The results above indicated that the mechanism of PCDD/Fs formation was related to the types of exhaust gas treatment device. The results of this study can provide technical support for the formulation of PCDD/Fs emission standards and the best available techniques in the secondary aluminum metallurgy industry.

  2. Superplasticity in powder metallurgy aluminum alloys and composites

    International Nuclear Information System (INIS)

    Mishra, R.S.; Bieler, T.R.; Mukherjee, A.K.

    1995-01-01

    Superplasticity in powder metallurgy Al alloys and composites has been reviewed through a detailed analysis. The stress-strain curves can be put into 4 categories: classical well-behaved type, continuous strain hardening type, continuous strain softening type and complex type. The origin of these different types of is discussed. The microstructural features of the processed material and the role of strain have been reviewed. The role of increasing misorientation of low angle boundaries to high angle boundaries by lattice dislocation absorption is examined. Threshold stresses have been determined and analyzed. The parametric dependencies for superplastic flow in modified conventional aluminum alloys, mechanically alloyed alloys and Al alloy matrix composites is determined to elucidate the superplastic mechanism at high strain rates. The role of incipient melting has been analyzed. A stress exponent of 2, an activation energy equal to that for grain boundary diffusion and a grain size dependence of 2 generally describes superplastic flow in modified conventional Al alloys and mechanically alloyed alloys. The present results agree well with the predictions of grain boundary sliding models. This suggests that the mechanism of high strain rate superplasticity in the above-mentioned alloys is similar to conventional superplasticity. The shift of optimum superplastic strain rates to higher values is a consequence of microstructural refinement. The parametric dependencies for superplasticity in aluminum alloy matrix composites, however, is different. A true activation energy of superplasticity in aluminum alloy matrix composites, however, is different. A true activation energy of 313 kJ/mol best describes the composites having SiC reinforcements. The role of shape of the reinforcement (particle or whisker) and processing history is addressed. The analysis suggests that the mechanism for superplasticity in composites is interface diffusion controlled grain boundary sliding

  3. Corrosion inhibition of powder metallurgy Mg by fluoride treatments.

    Science.gov (United States)

    Pereda, M D; Alonso, C; Burgos-Asperilla, L; del Valle, J A; Ruano, O A; Perez, P; Fernández Lorenzo de Mele, M A

    2010-05-01

    Pure Mg has been proposed as a potential degradable biomaterial to avoid both the disadvantages of non-degradable internal fixation implants and the use of alloying elements that may be toxic. However, it shows excessively high corrosion rate and insufficient yield strength. The effects of reinforcing Mg by a powder metallurgy (PM) route and the application of biocompatible corrosion inhibitors (immersion in 0.1 and 1M KF solution treatments, 0.1M FST and 1M FST, respectively) were analyzed in order to improve Mg mechanical and corrosion resistance, respectively. Open circuit potential measurements, polarization techniques (PT), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS) were performed to evaluate its corrosion behavior. SECM showed that the local current of attacked areas decreased during the F(-) treatments. The corrosion inhibitory action of 0.1M FST and 1M FST in phosphate buffered solution was assessed by PT and EIS. Under the experimental conditions assayed, 0.1M FST revealed better performance. X-ray photoelectron spectroscopy, energy dispersive X-ray and X-ray diffraction analyses of Mg(PM) with 0.1M FST showed the presence of KMgF(3) crystals on the surface while a MgF(2) film was detected for 1M FST. After fluoride inhibition treatments, promising results were observed for Mg(PM) as degradable metallic biomaterial due to its higher yield strength and lower initial corrosion rate than untreated Mg, as well as a progressive loss of the protective characteristics of the F(-)-containing film which ensures the gradual degradation process. Copyright (c) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  4. Lectures

    OpenAIRE

    Ceccaldi, Sylviane; Lassus, Isabelle de; Leménager, Nathalie; Thévenot., Magali

    2009-01-01

    Accès à l’emploi et insertion L’ancienneté professionnelle à l’épreuve de la flexicurité. Conter Bernard (Coord.), Lemistre Philippe (Coord.), Reynes Brigitte (Coord.) Toulouse, Presses de l’Université des sciences sociales de Toulouse, 2009, 314 p. La flexicurité est présentée, dans de nombreux discours, comme une voie pertinente de modernisation du marché du travail. Dans un tel contexte, l’ouvrage propose une analyse des modes de gestion de la main-d’œuvre, des représentations et des droit...

  5. Metallurgical aspects of welding. Ferrous and nonferrous materials. 4. new rev. ed.; Die Metallurgie des Schweissens. Eisenwerkstoffe - nichteisenmetallische Werkstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Schulze, Guenter

    2010-07-01

    This is the fourth edition of the standard work on welding metallurgy. The various problems of ferrous and nonferrous materials in the welding process are presented in great detail. In order to prevent corrosion of welded constructions, metallurgical properties and problems of all important technical materials are discussed, i.e. alloyed and unalloyed steels, cast iron materials, and the most relevant nonferrous materials. At the end of each chapter, the interested reader will find exercises for self-studies. Some of these can be solved using the material presented in the book while others are intended for deepening and further training. Easy examples (with solutions) are found all over the book; they are helpful because they provide information on underlying mechanisms and interdependences that are not obvious at first glance. The information was adapted to new EURO standards and international standards (up to March 2009) as far as these are relevant to Germany. New information is provided, e.g., on new steel standards (constructional steels according to DIN EN 10025), heat-treatable steels according to DIN EN 10025-6 and DIN EN 10083, high-alloy steels according to DIN EN 10088, and filler materials for steel welding according to DIN EN ISO 2560. The systematics of the ''law of cohabitation'' was applied to welding engineering for the first time here. (orig.) [German] Das in vierter Auflage erscheinende Buch widmet sich der Schweissmetallurgie mit ihren Besonderheiten. Die vielfaeltigen Probleme der Eisenwerkstoffe und der nichteisenmetallischen Werkstoffe bei ihrer schweisstechnischen Verarbeitung werden ausfuehrlich dargestellt. Um Korrosionsschaeden an geschweissten Konstruktionen vorzubeugen, wird die Metallurgie aller technisch bedeutsamen Werkstoffe, wie unlegierte und legierte Staehle, Eisen-Gusswerkstoffe, die wichtigsten NE-Metalle, ausfuehrlich besprochen. An den Kapitelenden findet der interessierte Leser Aufgaben, von denen ein

  6. Progress report of the Metallurgy Division for the period 1978-1980

    International Nuclear Information System (INIS)

    Sharma, B.D.; Mohan, Ashok; Bose, D.K.; Rao, C.N.; Chouthai, S.S.

    1980-01-01

    The research and development (R and D) work of the Metallurgy Division of the Bhabha Atomic Research Centre at Bombay for the period 1978-1980 is reported in the form of individual summaries under the headings: extractive metallurgy section, physical metallurgy section, corrosion and electrometallurgy section, ceramics section. Progress of work of beryllium pilot plant project, programme for R-5 utilisation for materials irradiation research project, development of rare, reactive and refractory metals, and development of ceramics materials for MHD programme is surveyed. Lists of publications, deputations, visits, conferences, colloquia are given. A chart at the end shows the various sections of the Division and personnel in each section. (M.G.B.)

  7. Introduction to powder metallurgy processes for titanium manufacturing; Introduccion al procesado pulvimetalurgico del titanio

    Energy Technology Data Exchange (ETDEWEB)

    Esteban, P. G.; Bolzoni, L.; Ruiz-Navas, E. M.; Gordo, E.

    2011-07-01

    The development of new extraction processes to produce titanium in powder form leads Powder Metallurgy to an advantage position among the manufacturing processes for titanium. The cost reduction of base material, coupled with the economy of the powder metallurgy processes, give titanium industry the chance to diversify its products, which could lead to production volumes able to stabilise the price of the metal. This work reviews some of the Powder Metallurgy techniques for the manufacturing of titanium parts, and describes the two typical approaches for titanium manufacturing: Blending Elemental and Prealloyed Powders. Among others, conventional pressing and sintering are described, which are compared with cold and hot isostatic pressing techniques. Real and potential applications are described. (Author) 71 refs.

  8. 76 FR 64344 - Amended Record of Decision for the Nuclear Facility Portion of the Chemistry and Metallurgy...

    Science.gov (United States)

    2011-10-18

    ... the same sets of safety controls and key equipment. Further, as the SEIS analysis indicates, once... Nuclear Facility Portion of the Chemistry and Metallurgy Research Building Replacement Project at Los...) for the Nuclear Facility portion of the Chemistry and Metallurgy Research Building Replacement (CMRR...

  9. Lecture Notes on Multigrid Methods

    Energy Technology Data Exchange (ETDEWEB)

    Vassilevski, P S

    2010-06-28

    The Lecture Notes are primarily based on a sequence of lectures given by the author while been a Fulbright scholar at 'St. Kliment Ohridski' University of Sofia, Sofia, Bulgaria during the winter semester of 2009-2010 academic year. The notes are somewhat expanded version of the actual one semester class he taught there. The material covered is slightly modified and adapted version of similar topics covered in the author's monograph 'Multilevel Block-Factorization Preconditioners' published in 2008 by Springer. The author tried to keep the notes as self-contained as possible. That is why the lecture notes begin with some basic introductory matrix-vector linear algebra, numerical PDEs (finite element) facts emphasizing the relations between functions in finite dimensional spaces and their coefficient vectors and respective norms. Then, some additional facts on the implementation of finite elements based on relation tables using the popular compressed sparse row (CSR) format are given. Also, typical condition number estimates of stiffness and mass matrices, the global matrix assembly from local element matrices are given as well. Finally, some basic introductory facts about stationary iterative methods, such as Gauss-Seidel and its symmetrized version are presented. The introductory material ends up with the smoothing property of the classical iterative methods and the main definition of two-grid iterative methods. From here on, the second part of the notes begins which deals with the various aspects of the principal TG and the numerous versions of the MG cycles. At the end, in part III, we briefly introduce algebraic versions of MG referred to as AMG, focusing on classes of AMG specialized for finite element matrices.

  10. Chapter 1: Direct Normal Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Myer, Daryl R.

    2016-04-15

    This chapter addresses the quantitative and qualitative aspects of the solar resource, the direct solar radiation. It discusses the total or integrated broadband direct beam extraterrestrial radiation (ETR). This total integrated irradiance is comprised of photons of electromagnetic radiation. The chapter also discusses the impact of the atmosphere and its effect upon the direct normal irradiance (DNI) beam radiation. The gases and particulates present in the atmosphere traversed by the direct beam reflect, absorb, and scatter differing spectral regions and proportions of the direct beam, and act as a variable filter. Knowledge of the available broadband DNI beam radiation resource data is essential in designing a concentrating photovoltaic (CPV) system. Spectral variations in the DNI beam radiation affect the performance of a CPV system depending on the solar cell technology used. The chapter describes propagation and scattering processes of circumsolar radiation (CSR), which includes the Mie scattering from large particles.

  11. Mechanics lectures on theoretical physics

    CERN Document Server

    Sommerfeld, Arnold Johannes Wilhelm

    1952-01-01

    Mechanics: Lectures on Theoretical Physics, Volume I covers a general course on theoretical physics. The book discusses the mechanics of a particle; the mechanics of systems; the principle of virtual work; and d'alembert's principle. The text also describes oscillation problems; the kinematics, statics, and dynamics of a rigid body; the theory of relative motion; and the integral variational principles of mechanics. Lagrange's equations for generalized coordinates and the theory of Hamilton are also considered. Physicists, mathematicians, and students taking Physics courses will find the book

  12. Special lecture on nuclear reactor

    International Nuclear Information System (INIS)

    Jo, Nam Jin

    1993-08-01

    This book gives a special lecture on nuclear reactor, which is divided into two parts. The first part has explanation on nuclear design of nuclear reactor and analysis of core with theories of integral transports, diffusion Nodal, transports Nodal and Monte Carlo skill parallel computer and nuclear calculation and speciality of transmutation reactor. The second part deals with speciality of nuclear reactor and control with nonlinear stabilization of nuclear reactor, nonlinear control of nuclear reactor, neural network and control of nuclear reactor, control theory of observer and analysis method of Adomian.

  13. Henry Norris Russell's Toronto Lectures

    Science.gov (United States)

    Devorkin, D. H.

    1996-12-01

    In February 1924, at the invitation of C. A. Chant, Russell presented a set of 14 public lectures on the state of astronomy and astrophysics. Designed to be inspirational, they also reveal Russell's contemporary views on the state of astrophysics as well as his sense of proper practice in astronomy. During his visit, Russell was interviewed by local reporters who asked his opinion about building a large observatory, one of Chant's major projects. What Russell had to say about such ventures did not please Chant one bit.

  14. Lectures on quantum field theory

    CERN Document Server

    Das, Ashok

    2008-01-01

    This book consists of the lectures for a two-semester course on quantum field theory, and as such is presented in a quite informal and personal manner. The course starts with relativistic one-particle systems, and develops the basics of quantum field theory with an analysis of the representations of the Poincaré group. Canonical quantization is carried out for scalar, fermion, Abelian and non-Abelian gauge theories. Covariant quantization of gauge theories is also carried out with a detailed description of the BRST symmetry. The Higgs phenomenon and the standard model of electroweak interactio

  15. Modernization of the Ural Metallurgy during the Great Patriotic War (1941–1945

    Directory of Open Access Journals (Sweden)

    Vladimir V. Zaparii

    2013-09-01

    Full Text Available The article characterizes the Ural industry modernization in war footing, shows the significance of evacuation of enterprises from the Western areas of the country to the region, reveals their role in the formation of a new metallurgical center of modern metallurgy in terms of human resources and manufacture. Innovations in metallurgy, the role of human factor in solving industrial restructuring problem are examined. Forms and methods of science use for the industrial modernization are considered. Solving of human resources problem is shown. The author touches upon the problem of metallurgical sector management in wartime. The role of people’s heroism in this difficult period of Russian history is discussed.

  16. Metallurgy of high-silicon steel parts produced using Selective Laser Melting

    OpenAIRE

    Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco; Hague, Richard

    2016-01-01

    The metallurgy of high-silicon steel (6.9%wt.Si) processed using Selective Laser Melting (SLM) is presented for the first time in this study. High-silicon steel has great potential as a soft magnetic alloy, but its employment has been limited due to its poor workability. The effect of SLM-processing on the metallurgy of the alloy is investigated in this work using microscopy, X-Ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD). XRD analysis suggests that the SLM high-silicon s...

  17. [Analysis of changes in characteristics of arterial hypertension occupational risk in workers of nonferrous metallurgy].

    Science.gov (United States)

    Vlasova, E M; Shliapnikov, D M; Lebedeva, T M

    2015-01-01

    The article covers changes in occupational cardiovascular risk for workers of nonferrous,metallurgy. Findings are that exposure to noise up to 94 dB with length of service increases possible atherosclerosis and metabolic syndrome. With 5 years of service, risk of the predicted conditions increases by 40.5%. When occupational exposure lasts over 5 years, risk of arterial hypertension increases. A group of workers without exposure to occupational factors appeared to have no connection between length of service and metabolic syndrome and arterial hypertension. Risk evolution modelling proved that risk of functional disorders in nonferrous metallurgy workers becomes unacceptable after 5 years of service (cardiovascular disorders are critical).

  18. Henryk Uziębło's heraldic decoration in the chapter house in Wawel

    Directory of Open Access Journals (Sweden)

    Józef Marecki

    1998-12-01

    Full Text Available Henryk Uziembło (27 February 1879 – 3 May 1945 was one of the creators of modern decorative art; he also made graphics. From 1922 to the outbreak of World War II he was a lecturer at the Institute of Fine Arts in Krakow. He designed polychromes, stained glass windows and mosaics, book bindings, posters and made oil paintings. He is the author of the decorations of the wall of the Wawel chapter house.

  19. How Interactive can a Lecture Become?

    OpenAIRE

    Koohgilani, Mehran

    2014-01-01

    The uses of technology have been well documented and many people have tried to use the available technology. In an age of increasingly idevices dependent generation where on average students check their portable devices at least every 15 minutes for 15 seconds, the way students engage with the lecture and the lecturer has changed. The dynamic environment of the lecture is one which can be very enjoyable, demanding and noisy. It requires the attention of the student, note taking skills, teachi...

  20. 9th Chapter of Surgeons' Lecture: the orthopaedic surgeon: historical perspective, ethical considerations and the future.

    Science.gov (United States)

    Balachandran, N

    1999-05-01

    From a fishing village with colonial surgeons from the East India Company, Singapore is now a medical and business hub servicing the region and beyond in trade and medical education. Orthopaedic Surgery is a young specialty and is the fastest growing sub-specialty in Surgery. Orthopaedic education in Singapore has a structured syllabus and training is coordinated with the Royal Colleges and the American Academy of Orthopaedic Surgeons. Part of the training as Fellows is in the United Kingdom and USA on an HMDP Fellowship. Ethics and Continuing Medical Education need further emphasis. Sub-specialisation in Orthopaedic Surgery is now well-established in Trauma, Adult Reconstructive Surgery, Sports Medicine, Spinal Surgery, Hand Surgery and Rehabilitation Medicine. Ageing in the next millennium with osteoporosis and hip fracture problems of gait and balance need more orthopaedic surgeons to be committed to rehabilitation medicine and voluntary service in the community. There is a need for good role models and knowledge on Quality Assurance, Clinical Pathways and Administration. Appropriate use of high technology and care for the aged in the community with dignity is fundamental to good ethical practice. Selfish, pecuniary interests will destroy the very soul and fabric of medicine.

  1. Lectures on the Topological Vertex

    CERN Document Server

    Mariño, M

    2008-01-01

    In this lectures, I will summarize the approach to Gromov–Witten invariants on toric Calabi–Yau threefolds based on large N dualities. Since the large N duality/topological vertex approach computes Gromov–Witten invariants in terms of Chern–Simons knot and link invariants, Sect. 2 is devoted to a review of these. Section 3 reviews topological strings and Gromov–Witten invariants, and gives some information about the open string case. Section 4 introduces the class of geometries we will deal with, namely toric (noncompact) Calabi–Yau manifolds, and we present a useful graphical way to represent these manifolds which constitutes the geometric core of the theory of the topological vertex. Finally, in Sect. 5, we define the vertex and present some explicit formulae for it and some simple applications. A brief Appendix contains useful information about symmetric polynomials. It has not been possible to present all the relevant background and physical derivations in this set of lectures. However, these...

  2. Web Lectures - ATLAS Overview Week

    CERN Multimedia

    Tushar Bhatnagar; Jeremy Herr; Mitch McLachlan; Homer A. Neal

    2007-01-01

    ATLAS Web Archives Web Archives of the ATLAS Overview Week in Glasgow are now available from the University of Michigan portal here. Archives of ATLAS Plenary Sessions, Workshops, Meetings, and Tutorials recorded over the past two years are available via the University of Michigan Lecture Portal. Other recent additions include the ROOT Workshop held at CERN on March 26-27, the Physics Analysis Tools Workshop held in Bergen, Norway on April 23-27, and the CTEQ Workshop: "Physics at the LHC: Early Challenges" held at Michigan State University on May 14-15. Viewing requires a standard Web browser with RealPlayer plug-in (included in most browsers automatically) and works on any major platform. Lectures can be viewed directly over the Web or downloaded locally. In addition, you will find access to a variety of general tutorials and events via the portal. Feedback & Suggestions Welcome Suggestions for events or tutorials to record in 2007, as well as feedback on existing archives, is always welcome...

  3. Metallurgy, environmental pollution and the decline of Etruscan civilisation.

    Science.gov (United States)

    Harrison, Adrian P; Cattani, Ilenia; Turfa, Jean M

    2010-01-01

    The Etruscans were justifiably famous in antiquity for their advanced metallurgy and for the rich mineral resources of their region (including La Tolfa, the Colline Metallifere, Mont'Amiata and Elba). We offer a new perspective on certain Iron Age and Archaic (ca. 1,000-480 BC: ) Etruscan industrial and habitation sites, and on the problem of heavy metal poisoning, still being investigated today, coincidentally in some of the same areas that originally saw Etruscan mines and workshops. This study investigates ancient sources, including literature and excavation reports, in the light of modern studies of heavy metal poisoning on human beings, plant and animal life. Furthermore, it is the first to use non-invasive Niton X-ray fluorescence analysis of samples of Etruscan (strictly ethnically Faliscan) hair (c. 350 BCE: ). The findings show the strong likelihood of heavy metal poisoning in areas of Etruscan metallurgical activity with the effects of this being responsible for or contributing to the abandonment of a number of these sites around the 6th century BC: . No thoroughly satisfactory explanation of this phenomenon has previously been offered. However, findings suggest that Faliscan women, represented by sample CG 2004-6-2, were not exposed to high levels of arsenic in life, which is not perhaps surprising for an urban aristocratic woman of the mid-4th century BC: . The reasons for the abandonment of several flourishing settlements are without doubt complex, and include political and social change. We suggest heavy metal contamination as an additional stimulus to the noted phenomenon of the peaceful abandonment, at the beginning, and at the end of the 6th century BC: , of sites in southern and northern Etruria such as Marsiliana d'Albegna (late 7th c.), Lago dell'Accesa, Acquarossa and Poggio Civitate-Murlo (late 6th c.). While the historical truth of the demise of Etruscan civilisation is much more complex, an interim set of related events, the desertion of

  4. Chapter 1: Standard Model processes

    OpenAIRE

    Becher, Thomas

    2017-01-01

    This chapter documents the production rates and typical distributions for a number of benchmark Standard Model processes, and discusses new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.

  5. Energy and wastes. Chapter 1

    International Nuclear Information System (INIS)

    2002-01-01

    In the Chapter 1 'Energy and wastes' it is shown the wastes generation inevitability at power production, because there are no absolutely wasteless technologies. After energy production technologies analysis the data that nuclear energy is most ecologically acceptable at maintenance related radiation safety measures

  6. Rudolf Ahlswede’s lectures on information theory

    CERN Document Server

    Althöfer, Ingo; Deppe, Christian; Tamm, Ulrich

    Volume 1 : The volume “Storing and Transmitting Data” is based on Rudolf Ahlswede's introductory course on "Information Theory I" and presents an introduction to Shannon Theory. Readers, familiar or unfamiliar with the technical intricacies of Information Theory, will benefit considerably from working through the book; especially Chapter VI with its lively comments and uncensored insider views from the world of science and research offers informative and revealing insights. This is the first of several volumes that will serve as a collected research documentation of Rudolf Ahlswede’s lectures on information theory. Each volume includes comments from an invited well-known expert. Holger Boche contributed his insights in the supplement of the present volume. Classical information processing concerns the main tasks of gaining knowledge, storage, transmitting and hiding data. The first task is the prime goal of Statistics. For the two next, Shannon presented an impressive mathematical theory called Informat...

  7. Lectures on classical and quantum theory of fields

    Energy Technology Data Exchange (ETDEWEB)

    Arodz, Henryk; Hadasz, Leszek [Jagiellonian Univ., Krakow (Poland). Inst. Physics

    2010-07-01

    This textbook on classical and quantum theory of fields addresses graduate students starting to specialize in theoretical physics. It provides didactic introductions to the main topics in the theory of fields, while taking into account the contemporary view of the subject. The student will find concise explanations of basic notions essential for applications of the theory of fields as well as for frontier research in theoretical physics. One third of the book is devoted to classical fields. Each chapter contains exercises of varying degree of difficulty with hints or solutions, plus summaries and worked examples as useful. The textbook is based on lectures delivered to students of theoretical physics at Jagiellonian University. It aims to deliver a unique combination of classical and quantum field theory in one compact course. (orig.)

  8. Mechanical alloying nanotechnology, materials science and powder metallurgy

    CERN Document Server

    El-Eskandarany, M Sherif

    2015-01-01

    This book is a detailed introduction to mechanical alloying, offering guidelines on the necessary equipment and facilities needed to carry out the process and giving a fundamental background to the reactions taking place. El-Eskandarany, a leading authority on mechanical alloying, discusses the mechanism of powder consolidations using different powder compaction processes. A new chapter will also be included on thermal, mechanically-induced and electrical discharge-assisted mechanical milling. Fully updated to cover recent developments in the field, this second edition also introduces new a

  9. The Relative Effects of Traditional Lectures and Guided Notes Lectures on University Student Test Scores

    Science.gov (United States)

    Williams, W. Larry; Weil, Timothy M.; Porter, James C. K.

    2012-01-01

    Guided notes were employed in two undergraduate Psychology courses involving 71 students. The study design utilized an alternating treatments format to compare Traditional Lectures with Guided Notes lectures. In one of the two courses, tests were administered after each class lecture, whereas the same type of test was administered at the beginning…

  10. The Use of Recorded Lectures in Education and the Impact on Lecture Attendance and Exam Performance

    Science.gov (United States)

    Bos, Nynke; Groeneveld, Caspar; van Bruggen, Jan; Brand-Gruwel, Saskia

    2016-01-01

    Universities increasingly record lectures and make them available online for students. Though the technology to record these lectures is now solidly implemented and embedded in many institutions, the impact of the usage of recorded lectures on exam performance is not clear. The purpose of the current study is to address the use of recorded…

  11. Online Lecture Recordings and Lecture Attendance: Investigating Student Preferences in a Large First Year Psychology Course

    Science.gov (United States)

    Yeung, Alexandra; Raju, Sadhana; Sharma, Manjula D.

    2016-01-01

    While blended learning has been around for some time, the interplay between lecture recordings, lecture attendance and grades needs further examination particularly for large cohorts of over 1,000 students in 500 seat lecture theatres. This paper reports on such an investigation with a cohort of 1,450 first year psychology students' who indicated…

  12. The use of recorded lectures in education and the impact on lecture attendance and exam performance

    NARCIS (Netherlands)

    Bos, Nynke; Groeneveld, Caspar; Van Bruggen, Jan; Brand-Gruwel, Saskia

    2017-01-01

    Universities increasingly record lectures and make them available online for students. Though the technology to record these lectures is now solidly implemented and embed- ded in many institutions, the impact of the usage of recorded lectures on exam perfor- mance is not clear. The purpose of the

  13. Forum: The Lecture and Student Learning. Lecture and Active Learning as a Dialectical Tension

    Science.gov (United States)

    Mallin, Irwin

    2017-01-01

    Lecture remains a valuable tool in the student learning toolbox--one that at its best helps students unpack what they read for class, place course material in context, and see how a subject matter expert solves problems. It may be useful to think of lecture and active learning as a dialectical tension satisfied by the interactive lecture. Just as…

  14. Influencing factors on lecture attendance at a tertiary institution ...

    African Journals Online (AJOL)

    Some of the findings showed differences between female and male lecture attendance, lecture/r quality as well as reasons for attending classes. It was also observed that there is a positive association between lecturer evaluation and lecture attendance by students. The results provide insight into a better understanding ...

  15. Improving Lecture Quality through Training in Public Speaking

    Science.gov (United States)

    Mowbray, Robert; Perry, Laura B.

    2015-01-01

    Lecturing is a common instructional format but poor lecturing skills can detract from students' learning experiences and outcomes. As lecturing is essentially a form of public communication, training in public speaking may improve lecture quality. Twelve university lecturers in Malaysia participated in a six-week public speaking skills training…

  16. Uranium mining and metallurgy library science and technology literature retrieval of network

    International Nuclear Information System (INIS)

    Tang Lilei

    2014-01-01

    This paper introduces the network resources and characteristics retrieve service of Beijing research Institute of Chemical Engineering of Metallurgy library, Analyzes the problems often encountered in the literature retrieval in science and technology, And puts forward the solution, Puts forward the thinking and Suggestions of science and technology literature retrieval. (author)

  17. Solvent Extraction of Copper: An Extractive Metallurgy Exercise for Undergraduate Teaching Laboratories

    Science.gov (United States)

    Smellie, Iain A.; Forgan, Ross S.; Brodie, Claire; Gavine, Jack S.; Harris, Leanne; Houston, Daniel; Hoyland, Andrew D.; McCaughan, Rory P.; Miller, Andrew J.; Wilson, Liam; Woodhall, Fiona M.

    2016-01-01

    A multidisciplinary experiment for advanced undergraduate students has been developed in the context of extractive metallurgy. The experiment serves as a model of an important modern industrial process that combines aspects of organic/inorganic synthesis and analysis. Students are tasked to prepare a salicylaldoxime ligand and samples of the…

  18. Powder metallurgy preparation of Al-Cu-Fe quasicrystals using mechanical alloying and Spark Plasma Sintering

    Czech Academy of Sciences Publication Activity Database

    Novák, P.; Kubatík, Tomáš František; Vystrčil, J.; Hendrych, R.; Kříž, J.; Mlynár, J.; Vojtěch, D.

    2014-01-01

    Roč. 52, September (2014), s. 131-137 ISSN 0966-9795 Institutional support: RVO:61389021 Keywords : Nanostructure intermetallics * Ternary alloys systems * Mechanical alloying and milling * Sintering * Diffraction Subject RIV: JG - Metallurgy Impact factor: 2.131, year: 2014 http://www.sciencedirect.com/science/article/pii/S0966979514001198#

  19. Recycling of wastes from uranium mining and metallurgy and recovery of useful resources in China

    International Nuclear Information System (INIS)

    Pan Yingjie; Xue Jianxin; Chen Zhongqiu

    2012-01-01

    Recycling of wastes from uranium mining and metallurgy in China and recovery of useful resources are summarized from the aspects such as recovery of uranium from mine water, reusing of waste water, decontaminating and recycling of radioactivity contaminated metal, backfill of gangues and tailings, and comprehensive recovery and utilization of associated uranium deposits. (authors)

  20. Practical application of solid phase spectrophotometry in analysis of materials and goods of mining and metallurgy

    International Nuclear Information System (INIS)

    Duan Qunzhang

    1999-01-01

    The author reviewed recent development and practical application of solid phase spectrophotometry in analysis of materials and goods of mining-metallurgy. Separation and preconcentration and conditions of coloring determination, sensitivity and range of detection, as well as interference of corresponding method are discussed

  1. Annual report of the Metallurgy Division [for the] period ending December 1977

    International Nuclear Information System (INIS)

    Elayaperumal, K.; Sridhar Rao, Ch.; Mukhopadhyay, P.; Rao, S.V.K.

    1979-01-01

    The research and development work carried out and the various programmes underway in the Metallurgy Division of the Bhabha Atomic Research Centre, Bombay, during the calendar year 1977 have been reported. The R and D work and programmes cover extraction metallurgy, physical metallurgy, alloy development, corrosion metallurgy and ceramics. Some of the major studies and programmes are: (1) development of processes for extraction of niobium, vanadium, hafnium and nickel, (2) preparation of niobium alloys, ferro-zirconium, ceramic grade zirconia, (3) electro-refining of zircaloy scrap, (4) preparation of anhydrous beryllium fluoride from Indian beryl, (5) preparation of beryllium alloys, (6) studies on phase transformation and deformation behaviour of zirconium and zirconium-oxygen alloys, (7) self-diffusion studies in dilute Zr-Fe and Zr-Cr alloys, (8) studies on corrosion and stress corrosion cracking of zirconium base alloys and (9) sintering studies on ZrO 2 -PuO 2 and BeO. (M.G.B.)

  2. Powder Metallurgy Preparation of Co-Based Alloys for Biomedical Applications

    Czech Academy of Sciences Publication Activity Database

    Marek, I.; Novák, P.; Mlynár, J.; Vojtěch, D.; Kubatík, Tomáš František; Málek, J.

    2015-01-01

    Roč. 128, č. 4 (2015), s. 597-601 ISSN 0587-4246. [International Symposium on Physics of Materials (ISPMA) /13./. Prague, 31.08.2014-04.09.2014] Institutional support: RVO:61389021 Keywords : powder metallurgy * mechanical properties * biomedical applications Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 0.525, year: 2015

  3. Mechanical properties of modified low cobalt powder metallurgy Udimet 700 type alloys

    Science.gov (United States)

    Harf, Fredric H.

    1989-01-01

    Eight superalloys derived from Udimet 700 were prepared by powder metallurgy, hot isostatically pressed, heat treated and their tensile and creep rupture properties determined. Several of these alloys displayed properties superior to those of Udimet 700 similarly prepared, in one case exceeding the creep rupture life tenfold. Filter clogging by extracted gamma prime, its measurement and significance are discussed in an appendix.

  4. Ice-core evidence of earliest extensive copper metallurgy in the Andes 2700 years ago.

    Science.gov (United States)

    Eichler, A; Gramlich, G; Kellerhals, T; Tobler, L; Rehren, Th; Schwikowski, M

    2017-01-31

    The importance of metallurgy for social and economic development is indisputable. Although copper (Cu) was essential for the wealth of pre- and post-colonial societies in the Andes, the onset of extensive Cu metallurgy in South America is still debated. Comprehensive archaeological findings point to first sophisticated Cu metallurgy during the Moche culture ~200-800 AD, whereas peat-bog records from southern South America suggest earliest pollution potentially from Cu smelting as far back as ~2000 BC. Here we present a 6500-years Cu emission history for the Andean Altiplano, based on ice-core records from Illimani glacier in Bolivia, providing the first complete history of large-scale Cu smelting activities in South America. We find earliest anthropogenic Cu pollution during the Early Horizon period ~700-50 BC, and attribute the onset of intensified Cu smelting in South America to the activities of the central Andean Chiripa and Chavin cultures ~2700 years ago. This study provides for the first time substantial evidence for extensive Cu metallurgy already during these early cultures.

  5. A Guide for Planning Facilities for Occupational Preparation Programs in Metallurgy Technology. Interim Report. Research 28.

    Science.gov (United States)

    German, Carl, Jr.

    The major purpose of this guide is to elicit the information necessary for writing educational specifications for facilities to house technical education programs in metallurgy. It is organized in these parts: (1) Part I discusses the major purpose, underlying assumptions, recent instructional trends, and guiding principles utilized in the…

  6. Microstructural and mechanical properties of biodegradable iron foam prepared by powder metallurgy

    Czech Academy of Sciences Publication Activity Database

    Čapek, Jaroslav; Vojtěch, D.; Oborná, A.

    2015-01-01

    Roč. 83, Oct (2015), s. 468-482 ISSN 0261-3069 R&D Projects: GA ČR GBP108/12/G043 Institutional support: RVO:68378271 Keywords : powder metallurgy * metallic foams * biodegradable iron * mechanical properties * scaffolds Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.997, year: 2015

  7. Powder metallurgy approaches to high temperature components for gas turbine engines

    Science.gov (United States)

    Probst, H. B.

    1974-01-01

    Research is reported for the tensile strength, ductility, and heat performance characterisitics of powder metallurgy (p/m) superalloys. Oxide dispersion strengthened alloys were also evaluated for their strength during thermal processing. The mechanical attributes evident in both p/m supperalloys and dispersion strengthened alloys are discussed in terms of research into their possible combination.

  8. Power metallurgy approaches to high temperature components for gas turbine engines

    Science.gov (United States)

    Probst, H. B.

    1974-01-01

    Work conducted by NASA and NASA contractors on prealloyed superalloy powders and materials strengthened by oxide dispersion is reviewed. Fabrication, tensile strength, superplasticity, grain growth control, stress rupture life, and grain-size and dispersion-level effects are covered. Distinct strength advantages of powder metallurgy superalloys over conventional wrought alloys are noted.

  9. [Concomitant influence of occupational and social risk factors on health of workers engaged into powder metallurgy].

    Science.gov (United States)

    Shur, P Z; Zaĭtseva, N V; Kostarev, V G; Lebedeva-Nesevria, N A; Shliapnikov, D M

    2012-01-01

    Results of health risk evaluation in workers engaged into powder metallurgy, using complex of hygienic, medical, epidemiologic and sociologic studies, enable to define priority occupational and social risk factors, to assess degree of their influence on the workers' health and to identify occupationally induced diseases.

  10. Lecture 3: Web Application Security

    CERN Multimedia

    CERN. Geneva

    2013-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture focuses on security aspects of Web application development. Various vulnerabilities typical to web applications (such as Cross-site scripting, SQL injection, cross-site request forgery etc.) are introduced and discussed. Sebastian Lopienski is CERN’s deputy Computer Security Officer. He works on security strategy and policies; offers internal consultancy and audit services; develops and maintains security tools for vulnerability assessment and intrusion detection; provides training and awareness raising; and does incident investigation and response. During his work at CERN since 2001, Sebastian has had various assignments, including designing and developing software to manage and support servic...

  11. Academic Training Lecture Regular Programme

    CERN Multimedia

    2012-01-01

    Ultra-High Energy Cosmic Rays (1/3), by Maria Teresa Dova (Universidad Nacional de La Plata & CONICET, Argentina).   Wednesday, April 25, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN (500-1-001 - Main Auditorium ) The origin of the highest energy cosmic rays (UHECR) with energies above 1000 TeV, is still unknown. The discovery of their sources will reveal the engines of the most energetic astrophysical accelerators in the universe. In these lectures we present the recent observational results from HiRes, Telescope Array and Pierre Auger Observatory as well as (some of) the possible astrophysical origins of UHECR. These experiments deal with particle interactions at energies orders of magnitude higher than achieved in terrestrial accelerators. Organised by Luis Alvarez-Gaume.

  12. Two lectures on track structure

    International Nuclear Information System (INIS)

    Waligorski, M.P.R.

    1987-01-01

    In a series of two lectures the principles of track structure theory, developed by Katz and collaborators, are reviewed. The text is intended to serve as an introduction to the theory. Applications of the model to c-hit physical detectors and to biological systems are reviewed. The model relates the signal of a detector after doses of X and gamma radiations to its signal after heavy charged particle irradiations, and is applicable to a variety of physical dosimeters: alanine, thermoluminescence and the Fricke dosimeters, to the inactivation of enzymes and viruses, and to biological systems: description of survival and neoplastic transformations in mammalian cells. Application of the model to heavy-ion cancer radiotherapy and to radiation protection is discussed as well as the controversies around the track structure approach. The model suggests new insights to fundamental research in detector theory and in radiobiology and in their applications in radiotherapy and radiation protection. 41 refs., 39 figs. (author)

  13. Collide@CERN - public lecture

    CERN Multimedia

    2012-01-01

    CERN, the Republic and Canton of Geneva and the City of Geneva are delighted to invite you to a public lecture by Gilles Jobin, first winner of the Collide@CERN Geneva Dance and Performance Artist-in-residence Prize, and his CERN inspiration partner, Joao Pequenao. They will present their work in dance and science at the Globe of Science and Innovation on Wednesday, 23 May 2012 at 7 p.m. (doors open at 6.30 p.m.).   
                                                  Programme 19:00 Opening address by - Professor Rolf-Dieter Heuer, CERN Director-General, - Ariane Koek...

  14. What Predicts Skill in Lecture Note Taking?

    Science.gov (United States)

    Peverly, Stephen T.; Ramaswamy, Vivek; Brown, Cindy; Sumowski, James; Alidoost, Moona; Garner, Joanna

    2007-01-01

    Despite the importance of good lecture notes to test performance, very little is known about the cognitive processes that underlie effective lecture note taking. The primary purpose of the 2 studies reported (a pilot study and Study 1) was to investigate 3 processes hypothesized to be significantly related to quality of notes: transcription…

  15. [Representativeness of general practice university lecturers].

    Science.gov (United States)

    Bouton, Céline; Leroy, Olivier; Huez, Jean-François; Bellanger, William; Ramond-Roquin, Aline

    2015-01-01

    In order to develop primary care research by general practice university lecturers, it was necessary to evaluate the representativeness of this group of lecturers at the Angers Faculty of Medicine. Declarative study based on self-administered questionnaires filled in by 216 university lecturers. The questionnaire was derived from that of the regional panel of the Research, studies, evaluation and statistics directorate of 2007, investigating the sociodemographic characteristics, professional organization, activities and certain professional practices of general practitioners. University lecturers were compared to the population of the panel by means of a Chi-square test of conformity. A total of 181 university lecturers participated in the survey, comprising 65% of men. The proportion of women was higher among university lecturers and the 45-54years age-group was underrepresented. The university lecturers group was significantly different from the panel in terms of predominantly group practice and shorter weekly working hours. No significant difference was observed for the type of town of practice ahd the continuing medical education participation rate. University lecturers present certain specificities, partly related to the reference population used. The development of research based on such a network appears to be feasible in terms ofrepresentativeness, provided these specificities are clearly described.

  16. Short lecture series in sustainable product development

    DEFF Research Database (Denmark)

    McAloone, Tim C.

    2005-01-01

    Three lectures in sustainable product development models, methods and mindsets should give insight into the way of thinking about the environment when developing products. The first two lectures will guide you through: . Environmental problems in industry & life-cycle thinking . Professional...... methods for analysing and changing products’ environmental profiles . Sustainability as a driver for innovation...

  17. Improving learning through formative assessment: the lecturer's ...

    African Journals Online (AJOL)

    It argues that lecture room leadership for promoting student learning cannot be meaningfully exercised in the university unless lecturers embrace and use feedback as a tool for enhancing student learning rather than focusing on meeting externally set targets and accountability standards. Makerere Journal of Higher ...

  18. Digital lecture recording: a cautionary tale.

    Science.gov (United States)

    Johnston, Amy N B; Massa, Helen; Burne, Thomas H J

    2013-01-01

    Increasing application of information technology including web-based lectures and live-lecture recording appears to have many advantages for undergraduate nursing education. These include greater flexibility, opportunity for students to review content on demand and the improved academic management of increasing class sizes without significant increase in physical infrastructure. This study performed a quasi-experimental comparison between two groups of nursing students undertaking their first anatomy and physiology course, where one group was also provided access to streaming of recorded copies of the live lectures and the other did not. For the course in which recorded lectures were available student feedback indicated overwhelming support for such provision with 96% of students having accessed recorded lectures. There was only a weak relationship between access of recorded lectures and overall performance in the course. Interestingly, the nursing students who had access to the recorded lectures demonstrated significantly poorer overall academic performance (P < 0.001). Although this study did not specifically control for student demographics or other academic input, the data suggests that provision of recorded lectures requires improved and applied time management practices by students and caution on the part of the academic staff involved. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Enhancing the Lecture: Revitalizing the Traditional Format.

    Science.gov (United States)

    Bonwell, Charles C.

    1996-01-01

    The traditional lecture format of college courses can be enhanced by including active learning designed to further course goals of learning knowledge, developing skills, or fostering attitudes. Techniques suggested include using pauses, short writing periods, think-pair-share activities, formative quizzes, lecture summaries, and several assessment…

  20. Individualization in a Lecture Hall Setting.

    Science.gov (United States)

    Halyard, Rebecca A.

    A two-quarter Human Anatomy and Physiology course for health-science students has been developed which incorporates the principles of individualization while maintaining the lecture hall setting. The lecture method contributes the following components to the course: (1) no special equipment or supplies; (2) personal interaction between instructor…

  1. Students' Perception of Live Lectures' Inherent Disadvantages

    Science.gov (United States)

    Petrovic, Juraj; Pale, Predrag

    2015-01-01

    This paper aims to provide insight into various properties of live lectures from the perspective of sophomore engineering students. In an anonymous online survey conducted at the Faculty of Electrical Engineering and Computing, University of Zagreb, we investigated students' opinions regarding lecture attendance, inherent disadvantages of live…

  2. Public Lectures | Events | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Academy's annual and mid-year meetings include a special lecture by a senior Fellow in the morning of each meeting day and one public lecture by an eminent person, from within the fellowship or outside, in science or technology, the arts, public life, or any other endeavour. Academy also organizes occasional public ...

  3. Lecture notes for criticality safety

    Energy Technology Data Exchange (ETDEWEB)

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  4. Lecture notes for criticality safety

    International Nuclear Information System (INIS)

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented

  5. Lecture notes for criticality safety

    Energy Technology Data Exchange (ETDEWEB)

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein`s mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  6. Anthropocentric Video Segmentation for Lecture Webcasts

    Directory of Open Access Journals (Sweden)

    Raul Rojas

    2008-03-01

    Full Text Available Many lecture recording and presentation systems transmit slides or chalkboard content along with a small video of the instructor. As a result, two areas of the screen are competing for the viewer's attention, causing the widely known split-attention effect. Face and body gestures, such as pointing, do not appear in the context of the slides or the board. To eliminate this problem, this article proposes to extract the lecturer from the video stream and paste his or her image onto the board or slide image. As a result, the lecturer acting in front of the board or slides becomes the center of attention. The entire lecture presentation becomes more human-centered. This article presents both an analysis of the underlying psychological problems and an explanation of signal processing techniques that are applied in a concrete system. The presented algorithm is able to extract and overlay the lecturer online and in real time at full video resolution.

  7. Prerequisites and opportunities for repositioning of the Urals metallurgy within the Industry 4.0

    Directory of Open Access Journals (Sweden)

    O. A. Romanova

    2017-12-01

    Full Text Available The authors present the modern trends in the development of metallurgy, and classify the technological structure of metallurgical industry. The article contains specific features of the development of metallurgy in the conditions of industry formation. A special role in this process plays the pace of digitalization and robotization of the industry, the development of additive technologies, Internet of things. The authors substantiate the possibility of developing the metallurgy of the Middle Urals as a science-intensive, high-tech complex that meets the requirements of Industry 4.0. This possibility interrelates with its repositioning, one of the main tasks of which is the formation of new sales markets focused on high-tech consumer industries, as well as the preservation of traditional consumption sectors under conditions of increasing competition in the construction materials market. The authors underline the importance of international cooperation in the field of environmentally safe industrial development, with applying the best available technologies and innovative development in general. The authors propose a methodological approach for assessing the repositioning of the regional metallurgical complex. This approach is the consecutive implementation of the following stages: assessment of dynamics and the forecast of development of consumer steel products sector and its structure based on identified priority areas of technological development of metallurgy in the region; construction of a factor model describing the changes in parameters of the RMC repositioning process, and approximation of the characteristics of their nonlinear elements; building a mathematical model on the basis of neural network algorithms for assessing the process of repositioning the RMC, taking into account projected values of the RMK parameters in the process of repositioning and changing the structure of consumer markets for metal products; formation of a variable

  8. Chapter 07: Species description pages

    Science.gov (United States)

    Alex C. Wiedenhoeft

    2011-01-01

    These pages are written to be the final step in the identification process; you will be directed to them by the key in Chapter 6. Each species or group of similar species in the same genus has its own set of pages. The information in the first page describes the characteristics of the wood covered in the manual. The page shows images of similar or confusable woods,...

  9. Vegetation and acidification, Chapter 5

    Science.gov (United States)

    David R. DeWalle; James N. Kochenderfer; Mary Beth Adams; Gary W. Miller

    2006-01-01

    In this chapter, the impact of watershed acidification treatments on WS3 at the Fernow Experimental Forest (FEF) and at WS9 on vegetation is presented and summarized in a comprehensive way for the first time. WS7 is used as a vegetative reference basin for WS3, while untreated plots within WS9 are used as a vegetative reference for WS9. Bioindicators of acidification...

  10. Powder-metallurgy preparation of NiTi shape-memory alloy using mechanical alloying and spark-plasma sintering.

    Czech Academy of Sciences Publication Activity Database

    Novák, P.; Moravec, H.; Vojtěch, V.; Knaislová, A.; Školáková, A.; Kubatík, Tomáš František; Kopeček, Jaromír

    2017-01-01

    Roč. 51, č. 1 (2017), s. 141-144 ISSN 1580-2949 R&D Projects: GA ČR(CZ) GA14-03044S Institutional support: RVO:61389021 ; RVO:68378271 Keywords : mechanical alloying * spark plasma sintering * NiTi * shape memory alloy Subject RIV: JG - Metallurgy; JG - Metallurgy (FZU-D) OBOR OECD: Materials engineering ; Materials engineering (FZU-D) Impact factor: 0.436, year: 2016 https://www.researchgate.net/publication/313900224_Powder-metallurgy_preparation_of_NiTi_shape-memory_alloy_using_mechanical_alloying_and_spark-plasma_sintering

  11. Experiences gained by establishing the IAMG Student Chapter Freiberg

    Science.gov (United States)

    Ernst, Sebastian M.; Liesenberg, Veraldo; Shahzad, Faisal

    2013-04-01

    The International Association for Mathematical Geosciences (IAMG) Student Chapter Freiberg was founded in 2007 at the Technische Universität Bergakademie Freiberg (TUBAF) in Germany by national and international graduate and undergraduate students of various geoscientific as well as natural science disciplines. The major aim of the IAMG is to promote international cooperation in the application and use of Mathematics in Geosciences research and technology. The IAMG encourages all types of students and young scientists to found and maintain student chapters, which can even receive limited financial support by the IAMG. Following this encouragement, generations of students at TUBAF have build up and established a prosperous range of activities. These might be an example and an invitation for other young scientists and institutions worldwide to run similar activities. We, some of the current and former students behind the student chapter, have organised talks, membership drives, student seminars, guest lectures, several short courses and even international workshops. Some notable short courses were held by invited IAMG distinguished lecturers. The topics included "Statistical analysis in the Earth Sciences using R - a language and environment for statistical computing and graphics", "Geomathematical Natural Resource Modeling" and "Introduction to Geostatistics for Environmental Applications and Natural Resources Evaluation: Basic Concepts and Examples". Furthermore, we conducted short courses by ourselves. Here, the topics included basic introductions into MATLAB, object oriented programming concepts for geoscientists using MATLAB and an introduction to the Keyhole Markup Language (KML). Most of those short courses lasted several days and provided an excellent and unprecedented teaching experience for us. We were given credit by attending students for filling gaps in our university's curriculum by providing in-depth and hands-on tutorials on topics, which were merely

  12. 106-17 Telemetry Standards Chapter 1

    Science.gov (United States)

    2017-07-01

    Telemetry Standards, RCC Standard 106-17 Chapter 1, July 2017 1-1 CHAPTER 1 Introduction The Telemetry Standards address the here-to-date...conventional methods, techniques, and practices affiliated with aeronautical telemetry applicable to the member RCC ranges. The first 11 chapters are...generally devoted to a different element of the telemetry system or process. Chapters 21 through 28 address the topic of network telemetry . These

  13. Lectures on formally real fields

    CERN Document Server

    Prestel, Alexander

    1984-01-01

    Absolute values and their completions - like the p-adic number fields- play an important role in number theory. Krull's generalization of absolute values to valuations made applications in other branches of mathematics, such as algebraic geometry, possible. In valuation theory, the notion of a completion has to be replaced by that of the so-called Henselization. In this book, the theory of valuations as well as of Henselizations is developed. The presentation is based on the knowledge aquired in a standard graduate course in algebra. The last chapter presents three applications of the general theory -as to Artin's Conjecture on the p-adic number fields- that could not be obtained by the use of absolute values only.

  14. Paul Dirac lectures at CERN

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    When a group of physicists entered the Main Auditorium, during the evening of 29 June, they felt they had opened a time portal.   Paul Dirac in front of a blackboard showing his formula. ©Sandra Hoogeboom An attentive audience, dressed in early 1900 costumes, were watching a lecture by the elusive Paul Dirac, presenting for the first time his famous formula on the blackboard. Paul Adrien Maurice Dirac (1902-1984) was a British mathematical physicist at Cambridge, and one of the "fathers" of quantum mechanics. When he first wrote it, in 1928, Dirac was not sure what his formula really meant. As demonstrated by Andersson four year later, what Dirac had written on the blackboard was the first definition of a positron, hence he is credited with having anticipated the existence of antimatter. The actor John Kohl performs as Paul Dirac. ©Sandra Hoogeboom What the group of puzzled physicists were really observing when they entered the CERN Auditorium was the shoo...

  15. Lectures on advances in combinatorics

    CERN Document Server

    Ahlswede, Rudolf

    2008-01-01

    The main focus of these lectures is basis extremal problems and inequalities – two sides of the same coin. Additionally they prepare well for approaches and methods useful and applicable in a broader mathematical context. Highlights of the book include a solution to the famous 4m-conjecture of Erdös/Ko/Rado 1938, one of the oldest problems in combinatorial extremal theory, an answer to a question of Erdös (1962) in combinatorial number theory "What is the maximal cardinality of a set of numbers smaller than n with no k+1 of its members pair wise relatively prime?", and the discovery that the AD-inequality implies more general and sharper number theoretical inequalities than for instance Behrend's inequality. Several concepts and problems in the book arise in response to or by rephrasing questions from information theory, computer science, statistical physics. The interdisciplinary character creates an atmosphere rich of incentives for new discoveries and lends Ars Combinatoria a special status in mathemat...

  16. Lectures on probability and statistics

    Energy Technology Data Exchange (ETDEWEB)

    Yost, G.P.

    1984-09-01

    These notes are based on a set of statistics lectures delivered at Imperial College to the first-year postgraduate students in High Energy Physics. They are designed for the professional experimental scientist. We begin with the fundamentals of probability theory, in which one makes statements about the set of possible outcomes of an experiment, based upon a complete a priori understanding of the experiment. For example, in a roll of a set of (fair) dice, one understands a priori that any given side of each die is equally likely to turn up. From that, we can calculate the probability of any specified outcome. We finish with the inverse problem, statistics. Here, one begins with a set of actual data (e.g., the outcomes of a number of rolls of the dice), and attempts to make inferences about the state of nature which gave those data (e.g., the likelihood of seeing any given side of any given die turn up). This is a much more difficult problem, of course, and one's solutions often turn out to be unsatisfactory in one respect or another.

  17. Chemical Tracer Methods: Chapter 7

    Science.gov (United States)

    Healy, Richard W.

    2017-01-01

    Tracers have a wide variety of uses in hydrologic studies: providing quantitative or qualitative estimates of recharge, identifying sources of recharge, providing information on velocities and travel times of water movement, assessing the importance of preferential flow paths, providing information on hydrodynamic dispersion, and providing data for calibration of water flow and solute-transport models (Walker, 1998; Cook and Herczeg, 2000; Scanlon et al., 2002b). Tracers generally are ions, isotopes, or gases that move with water and that can be detected in the atmosphere, in surface waters, and in the subsurface. Heat also is transported by water; therefore, temperatures can be used to trace water movement. This chapter focuses on the use of chemical and isotopic tracers in the subsurface to estimate recharge. Tracer use in surface-water studies to determine groundwater discharge to streams is addressed in Chapter 4; the use of temperature as a tracer is described in Chapter 8.Following the nomenclature of Scanlon et al. (2002b), tracers are grouped into three categories: natural environmental tracers, historical tracers, and applied tracers. Natural environmental tracers are those that are transported to or created within the atmosphere under natural processes; these tracers are carried to the Earth’s surface as wet or dry atmospheric deposition. The most commonly used natural environmental tracer is chloride (Cl) (Allison and Hughes, 1978). Ocean water, through the process of evaporation, is the primary source of atmospheric Cl. Other tracers in this category include chlorine-36 (36Cl) and tritium (3H); these two isotopes are produced naturally in the Earth’s atmosphere; however, there are additional anthropogenic sources of them.

  18. List of unclassified documents by the staff of Metallurgy Division, AERE Harwell from January 1979 to July 1980

    International Nuclear Information System (INIS)

    Smith, N.C.

    1980-12-01

    This list constitutes unclassified material published or presented between January 1979 and July 1980, by the staff of Metallurgy Division. It covers reports, memoranda, articles in periodicals, conference papers, books and patent specifications. (author)

  19. Fourier Transform Methods. Chapter 4

    Science.gov (United States)

    Kaplan, Simon G.; Quijada, Manuel A.

    2015-01-01

    This chapter describes the use of Fourier transform spectrometers (FTS) for accurate spectrophotometry over a wide spectral range. After a brief exposition of the basic concepts of FTS operation, we discuss instrument designs and their advantages and disadvantages relative to dispersive spectrometers. We then examine how common sources of error in spectrophotometry manifest themselves when using an FTS and ways to reduce the magnitude of these errors. Examples are given of applications to both basic and derived spectrophotometric quantities. Finally, we give recommendations for choosing the right instrument for a specific application, and how to ensure the accuracy of the measurement results..

  20. Chapter 9. The landscape sector

    International Nuclear Information System (INIS)

    Larivaille, Pierrette

    1980-01-01

    The object of this work is to examine the interactions between the activities of the electric industry (generating, transmission and distribution) and the environment, whilst showing to what extent the facilities are likely to affect it adversely and describing the measures taken to lessen the detrimental effects. The chapter devoted to the 'landscape' includes a section covering the electricity generating facilities, and among these, the nuclear power stations. The studies carried out on the main units of insertion into the site are presented, particularly the landscaping involved in setting up a power station [fr

  1. Engagement of students with lectures in biochemistry and pharmacology.

    Science.gov (United States)

    Davis, Elizabeth Ann; Hodgson, Yvonne; Macaulay, Janet Olwyn

    2012-01-01

    Academic staff at universities have become concerned about the decrease in student attendance at lectures and the implication of this on student achievement and learning. Few studies have measured actual lecture attendance in a coherent or comprehensive way. The aim of this study was to measure actual lecture attendance of students over two year levels enrolled in two separate science disciplines, biochemistry and pharmacology. The study further sought to determine the factors that influence lecture attendance. Attendance at lectures in four units of study was monitored over a 12-week semester. Attendance at lectures decreased over the semester and was lower at early morning lectures (8 A.M.; 9 A.M.). A questionnaire surveying students about their preparation for lectures, their compensation for missed lectures and the factors influencing their nonattendance was administered at the end of the semester. Students reported that the major factors influencing their attendance at lectures related to timetable issues and the quality of lecturing. If students missed lectures, the majority read the lecture notes and listened to the online recordings. The availability of online recordings of lectures was not a major influence on attendance at lectures. In three of the four units studied there was no correlation between self-reported lecture attendance and exam performance. The results of the study indicate that universities should dedicate more resources to timetabling and to supporting staff to improve the quality of their lectures. Copyright © 2012 Wiley Periodicals, Inc.

  2. Thermal stability and creep behaviour of MgNiYCe-rich mischmetal alloys processed by a powder metallurgy route

    Czech Academy of Sciences Publication Activity Database

    Peréz, P.; Milička, Karel; Badia, J. M.; Garcés, G.; Antoranz, J. M.; Gonzáles, S.; Dobeš, Ferdinand; Adeva, P.

    289-292, - (2009), s. 127-136 ISSN 1012-0386. [DIMAT 2008, International Conference on Diffusion in Materials /7./. Lanzarote, Canary Islands, 28.10.2008-31.10.2008] Grant - others:Ministerio de Ciencia y Tecnologia (ES) MAT2006-11731-C02 Institutional research plan: CEZ:AV0Z20410507 Keywords : magnesium alloys * powder metallurgy * microstructure * thermal stability * creep Subject RIV: JG - Metallurgy

  3. Thermogravimetric control of intermediate compounds in uranium metallurgy; Control termogravimetrico de productos intermedios de la metalurgia del uranio

    Energy Technology Data Exchange (ETDEWEB)

    Gasco Sanchez, L.; Fernandez Cellini, R.

    1959-07-01

    The thermal decomposition of some intermediate compounds in the metallurgy of the uranium as uranium peroxide, ammonium uranate, uranium and ammonium penta-fluoride, uranium tetrafluoride and uranous oxide has been study by means of the Chevenard's thermo balance. Some data on pyrolysis of synthetic mixtures of intermediate compounds which may occasionally appear during the industrial process, are given. Thermogravimetric methods of control are suggested, usable in interesting products in the uranium metallurgy. (Author) 20 refs.

  4. George Stephanopoulos to give Cutchins Distinguished Lecture

    OpenAIRE

    Ho, Sookhan

    2006-01-01

    ABC News' chief Washington correspondent and"This Week" anchor George Stephanopoulos will give the Cutchins Distinguished Lecture at Virginia Tech on Thursday, March 16, 7:30 p.m., in Burruss Auditorium.

  5. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    J. Herr

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. The current system, including future developments for the project and the field in general, was recently presented at the CHEP 2006 conference in Mumbai, India. The relevant presentations and papers can be found here: The Web Lecture Archive Project A Web Lecture Capture System with Robotic Speaker Tracking This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. All lectures can be viewed on any major platform with any common internet browser, either via streaming or local download (for limited bandwidth). Please enjoy the l...

  6. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    Goldfarb, S.

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, WLAP, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. The current system, including future developments for the project and the field in general, was recently presented at the CHEP 2006 conference in Mumbai, India. The relevant presentations and papers can be found here: The Web Lecture Archive Project. A Web Lecture Capture System with Robotic Speaker Tracking This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. All lectures can be viewed on any major platform with any common internet browser, either via streaming or local download (for limited bandwidth). Please e...

  7. Genetic Algorithms to Optimizatize Lecturer Assessment's Criteria

    Science.gov (United States)

    Jollyta, Deny; Johan; Hajjah, Alyauma

    2017-12-01

    The lecturer assessment criteria is used as a measurement of the lecturer's performance in a college environment. To determine the value for a criteriais complicated and often leads to doubt. The absence of a standard valuefor each assessment criteria will affect the final results of the assessment and become less presentational data for the leader of college in taking various policies relate to reward and punishment. The Genetic Algorithm comes as an algorithm capable of solving non-linear problems. Using chromosomes in the random initial population, one of the presentations is binary, evaluates the fitness function and uses crossover genetic operator and mutation to obtain the desired crossbreed. It aims to obtain the most optimum criteria values in terms of the fitness function of each chromosome. The training results show that Genetic Algorithm able to produce the optimal values of lecturer assessment criteria so that can be usedby the college as a standard value for lecturer assessment criteria.

  8. Lectures on the basis of physics

    International Nuclear Information System (INIS)

    Cook, A.

    1990-09-01

    The paper contains the following three lectures given by Alan Cook at ICTP Trieste in August, 1990: ''Metrology and the Structure of Physics'', ''Why does Mathematical Physics Work?'' and ''Probability, Chaos and the Environment. 9 refs

  9. Educational technology and the traditional lecture

    Directory of Open Access Journals (Sweden)

    Gabriel Jacobs

    1994-12-01

    Full Text Available I was recently invited to give a lecture at the opening of a new high-technology lecture theatre at Leeds Metropolitan University. It is one of the best examples of its kind I have seen. Its impressive features include hi-fi surround sound, an enormous back-projected screen giving superb picture quality from either a VCR or directly from a computer for live demonstrations, online facilities, the latest remote-control slide-projection equipment, complete lecturer's control panel, and several nice touches such as automatic dimming of the auditorium lights when Play is pressed on any of the hidden video playback machines. The overhead projectors and their screens are of the best quality and correctly positioned for the clearest possible display. There are also video-link facilities for spill-over into a secondary lecture theatre which itself is well fitted out in presentational equipment.

  10. Why do students miss lectures? A study of lecture attendance amongst students of health science.

    Science.gov (United States)

    Bati, A Hilal; Mandiracioglu, Aliye; Orgun, Fatma; Govsa, Figen

    2013-06-01

    In the domain of health sciences, attendance by students at lectures is more critical. Lecture attendance is an issue which has been widely neglected. This study aims to determine those factors which affect the lecture attendance. The research data was collected by means of a questionnaire during the second semester of the academic year 2010-2011 from second-year students of the Faculties of Medicine, Pharmacy, Dentistry and Nursing. Together with demographic data, the questionnaire includes a Likert-type scale aiming to determine the factors influencing attendance at lectures. 663 participated in this study on a voluntary basis from Medical, Dentistry, Pharmacy and Nursing Faculties. Raising attainment levels, being able to take their own lecture notes, learning which aspects of the lecture content were being emphasized, and the opportunity to ask questions were amongst the chief reasons for attending lectures. It appears that the factors preventing students from attending lectures are mainly individual. Amongst the most frequently cited causes of non-attendance, sleeplessness, ill health and the inefficiency of lectures in overcrowded halls are emphasized. In the totals and sub-dimensions of the Lecture Attendance Scale, Medical Faculty students have average scores higher than those of students at other faculties. The vital nature of professional expertise and its applications, health sciences students' attendance at lectures carries greater importance. It is important to strengthen the mentoring system with regard to individual and external factors, which have been implicated as having a substantial influence on lecture attendance by students. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Chapter 11: Concentrating Solar Power

    Energy Technology Data Exchange (ETDEWEB)

    Turchi, Craig S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Stekli, J. [U.S. Department of Energy; Bueno, P. C. [Southwest Research Institute

    2017-01-02

    This chapter summarizes the applications of the supercritical CO2 (sCO2) Brayton cycle in concentrating solar power (CSP) plants. The design and operation of CSP plants are reviewed to highlight the requirements for the power cycle and attributes that are advantageous for the solar-thermal application. The sCO2 Brayton cycle offers the potential of higher cycle efficiency versus superheated or supercritical steam cycles at temperatures relevant for CSP applications. In addition, Brayton cycle systems using sCO2 are anticipated to have smaller weight and volume, lower thermal mass, and less complex power blocks compared with Rankine cycles due to the higher density of the fluid and simpler cycle design. The simpler machinery and compact size of the sCO2 process may also reduce the installation, maintenance, and operation cost of the system. Power cycle capacities in the range of 10-150 MWe are anticipated for the CSP application. In this chapter, we explore sCO2 Brayton cycle configurations that have attributes that are desirable from the perspective of a CSP application, such as the ability to accommodate dry cooling and daily cycling, as well as integration with thermal energy storage.

  12. Lectures on flips and minimal models

    OpenAIRE

    Corti, Alessio; Hacking, Paul; Kollár, János; Lazarsfeld, Robert; Mustaţă, Mircea

    2007-01-01

    This document contains notes from the lectures of Corti, Koll\\'ar, Lazarsfeld, and Musta\\c{t}\\u{a} at the workshop ``Minimal and canonical models in algebraic geometry" at MSRI, Berkeley, April 2007. The lectures give an overview of the recent advances on canonical and minimal models of algebraic varieties obtained by Hacon--McKernan and Birkar--Cascini--Hacon--McKernan.

  13. Lecture Notes in Statistics. 3rd Semester

    DEFF Research Database (Denmark)

    The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models.......The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models....

  14. Water Technology Lecture 3: Water Distribution

    OpenAIRE

    Gray, Nicholas Frederick

    2017-01-01

    This is the third lecture in the course Water Technology dealing with water distribution. This is a PowerPoint lecture which is free to use and modify. It was designed to be used in conjunction with the course text Gray, N.F. (2017) Water Science and Technology: An Introduction, published by CRC Press, Oxford. The basis of water distribution is explored including water pipe materials, distribution systems, leakage, water quality problems, pressure issue, water hydrants, effect of floods,...

  15. Structural and electrical properties of copper-nickel-aluminum alloys obtained by conventional powder metallurgy method

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Waldemar A.; Carrio, Juan A.G.; Silveira, C.R. da; Pertile, H.K.S., E-mail: fisica.cch@mackenzie.br [Universidade Presbiteriana Mackenzie (UPM/CCH), Sao Paulo, SP (Brazil). Centro de Ciencias e Humanidades. Dept. de Fisica; Silva, L.C.E. da; Buso, S.J., E-mail: jgcarrio@mackenzie.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    This work looked for to search out systematically, in scale of laboratory, copper-nickel-aluminum alloys (Cu-Ni-Al) with conventional powder metallurgy processing, in view of the maintenance of the electric and mechanical properties with the intention of getting electric connectors of high performance or high mechanical damping. After cold uniaxial pressing (1000 kPa), sintering (780 deg C) and convenient homogenization treatments (500 deg C for different times) under vacuum (powder metallurgy), the obtained Cu-Ni-Al alloys were characterized by optical microscopy, electrical conductivity, Vickers hardness. X rays powder diffraction data were collected for the sintered samples in order to a structural and microstructural analysis. The comparative analysis is based on the sintered density, hardness, macrostructures and microstructures of the samples. (author)

  16. Structural and electrical properties of copper-nickel-aluminum alloys obtained by conventional powder metallurgy method

    International Nuclear Information System (INIS)

    Monteiro, Waldemar A.; Carrio, Juan A.G.; Silveira, C.R. da; Pertile, H.K.S.

    2009-01-01

    This work looked for to search out systematically, in scale of laboratory, copper-nickel-aluminum alloys (Cu-Ni-Al) with conventional powder metallurgy processing, in view of the maintenance of the electric and mechanical properties with the intention of getting electric connectors of high performance or high mechanical damping. After cold uniaxial pressing (1000 kPa), sintering (780 deg C) and convenient homogenization treatments (500 deg C for different times) under vacuum (powder metallurgy), the obtained Cu-Ni-Al alloys were characterized by optical microscopy, electrical conductivity, Vickers hardness. X rays powder diffraction data were collected for the sintered samples in order to a structural and microstructural analysis. The comparative analysis is based on the sintered density, hardness, macrostructures and microstructures of the samples. (author)

  17. Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process

    Directory of Open Access Journals (Sweden)

    C. Mathalai Sundaram

    2014-12-01

    Full Text Available Electrical discharge machining (EDM is one of the widely used nontraditional machining methods to produce die cavities by the erosive effect of electrical discharges. This method is popular due to the fact that a relatively soft electrically conductive tool electrode can machine hard work piece. Copper electrode is normally used for machining process. Electrode wear rate is the major drawback for EDM researchers. This research focus on fabrication of metal matrix composite (MMC electrode by mixing copper powder with titanium carbide (TiC and Tungsten carbide (WC powder through powder metallurgy process, Copper powder is the major amount of mixing proportion with TiC and WC. However, this paper focus on the early stage of the project where powder metallurgy route was used to determine suitable mixing time, compaction pressure and sintering and compacting process in producing EDM electrode. The newly prepared composite electrodes in different composition are tested in EDM for OHNS steel.

  18. Quantifying the properties of low-cost powder metallurgy titanium alloys

    International Nuclear Information System (INIS)

    Bolzoni, L.; Ruiz-Navas, E.M.; Gordo, E.

    2017-01-01

    The extensive industrial employment of titanium is hindered by its high production costs where reduction of these costs can be achieved using cheap alloying elements and appropriate alternative processing techniques. In this work the feasibility of the production of low-cost titanium alloys is addressed by adding steel to pure titanium and processing the alloys by powder metallurgy. In particular, a spherical 4140 LCH steel powder commonly used in metal injection moulding is blended with irregular hydride-dehydride Ti. The new low-cost alloys are cold uniaxially pressed and sintered under high vacuum and show comparable properties to other wrought-equivalent and powder metallurgy titanium alloys. Differential thermal analysis and X-ray diffraction analyses confirm that Ti can tolerate the employment of iron as primary alloying element without forming detrimental TiFe-based intermetallic phases. Thus, the newly designed α+β alloys could be used for cheaper non-critical components.

  19. Preparation of Three-Dimensional Graphene Foams Using Powder Metallurgy Templates.

    Science.gov (United States)

    Sha, Junwei; Gao, Caitian; Lee, Seoung-Ki; Li, Yilun; Zhao, Naiqin; Tour, James M

    2016-01-26

    A simple and scalable method which combines traditional powder metallurgy and chemical vapor deposition is developed for the synthesis of mesoporous free-standing 3D graphene foams. The powder metallurgy templates for 3D graphene foams (PMT-GFs) consist of particle-like carbon shells which are connected by multilayered graphene that shows high specific surface area (1080 m(2) g(-1)), good crystallization, good electrical conductivity (13.8 S cm(-1)), and a mechanically robust structure. The PMT-GFs did not break under direct flushing with DI water, and they were able to recover after being compressed. These properties indicate promising applications of PMT-GFs for fields requiring 3D carbon frameworks such as in energy-based electrodes and mechanical dampening.

  20. [Investigation about prevention behavior for dust workers in machinery, ceramic, and metallurgy industry].

    Science.gov (United States)

    Shen, Fu-hai; Ma, Qing-kun; Xiao, Shu-yu; Cui, Feng-tao; Meng, Qing-di; Yang, Xiu-qing; Qi, Hui-sheng; Fan, Xue-yun; Yao, San-qiao

    2011-01-01

    The purposes of this thesis were to study the behavior about workers exposed to dust and provide scientific basis for health promotion. We designed a questionnaire and carry it on the 746 dust workers in the 3 representative corporations of Machinery, Ceramic, and Metallurgy Industry. All data were input into computer. And a database was established with Excel. SPSS11.5 statistical analysis software was used to analyze the influence on protecting behavioral between the application of qualifications, different jobs, training or protection, and other aspects etc. The rates were 94.4% and 75.3% about the regular physical examination and requirements for protective equipment. The rate of choosing an effective way of protection was generally low (15.4%). There was significant difference for among different educational background workers (P Metallurgy Industry. Those who were not educated had a lower using rate about the protection behavior, regular physical examination, and requirements for protective equipment than those educated.

  1. [Risk and features of occupational diseases in nonferrous metallurgy workers of Kolsky Transpolar area].

    Science.gov (United States)

    Siurin, S A; Chashchin, V P; Frolova, N M

    2015-01-01

    The study covered data on 977 cases of occupational diseases in 615 workers of nonferrous metallurgy in Kolsky Transpolar area. Findings are high risk of occupational diseases in workers engaged into electrolysis production of aluminium, all nickel reprocessing and pyrometallic copper reprocessing (GR 7.02-10.0). Electrolysis operators and anode operators of aluminium production are more prone to occupational diseases, with bone and muscular disorders (46.8%) prevalent in the morbidity structure. Respiratory diseases are more prevalent (68.2-100%) in the occupational morbidity structure of copper-nickelindustry workers. Conclusion is made on mandatory improvement of the work conditions and more effective individual protective means against occupational hazards in workers of nonferrous metallurgy in Kolsky Transpolar area.

  2. Estimation and characterization of polycyclic aromatic hydrocarbons from magnesium metallurgy facilities in China.

    Science.gov (United States)

    Nie, Zhiqiang; Yang, Yufei; Tang, Zhenwu; Liu, Feng; Wang, Qi; Huang, Qifei

    2014-11-01

    Field monitoring was conducted to develop a polycyclic aromatic hydrocarbon (PAH) emission inventory for the magnesium (Mg) metallurgy industry in China. PAH emissions in stack gas and fly/bottom ash samples from different smelting units of a typical Mg smelter were measured and compared. Large variations of concentrations, congener patterns, and emission factors of PAHs during the oxidation and reduction stages in the Mg smelter were observed. The measured average emission factor (166,487 μg/t Mg) was significantly higher than those of other industrial sources. Annual emission from Mg metallurgy in 2012 in China was estimated at 116 kg (514 g BaPeq) for PAHs. The results of this study suggest that PAH emission from Mg industries should be considered by local government agencies. These data may be helpful for understanding PAH levels produced by the Mg industry and in developing a PAH inventory.

  3. Mechanical properties of metals for biomedical applications using powder metallurgy process: A review

    Science.gov (United States)

    Dewidar, Montasser Marasy; Yoon, Ho-Chel; Lim, Jae Kyoo

    2006-06-01

    The uses of biomaterials have been revolutionizing the biomedical field in deployment as implants for humans. During the past five decades, many implant materials made of metals have been put into practical use. Powder metallurgy techniques have been used to produce controlled porous structures, such as porous coatings applied for dental and orthopedic surgical implants, which allow bony tissue ingrowth within the implant surface, thereby improving fixation. This paper examines various important metals using powder metallurgy technology to produce elements of a total hip replacement. These alloys are 316L stainless steel alloy, Co-Cr-Mo alloy, and Ti-6Al-4V alloy. Also, this paper examines current information on the mechanical properties. Mechanical properties are discussed as a function of type of materials and process of fabrication. This article addresses the engineering aspects concerning the advantages and disadvantages of each type of material.

  4. Flipped classroom or an active lecture?

    Science.gov (United States)

    Pickering, James D; Roberts, David J H

    2018-01-01

    Recent changes in anatomy education have seen the introduction of flipped classrooms as a replacement to the traditional didactic lecture. This approach utilizes the increasing availability of digital technology to create learning resources that can be accessed prior to attending class, with face-to-face sessions then becoming more student-centered via discussion, collaborative learning, and problem-solving activities. Although this approach may appear intuitive, this viewpoint commentary presents a counter opinion and highlights a simple alternative that utilizes evidence-based active learning approaches as part of the traditional lecture. The active lecture takes the traditional lecture, and (1) ensures the lecture content is relevant and has clear objectives, (2) contains lecture material that is designed according to the latest evidence-base, (3) complements it with additional supplementary material, (4) creates space to check prior understanding and knowledge levels, and (5) utilizes suitable technology to facilitate continual engagement and interaction. Clin. Anat. 31:118-121, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  5. Characterization of Powder Metallurgy Processed Pure Magnesium Materials for Biomedical Applications

    Czech Academy of Sciences Publication Activity Database

    Březina, M.; Minda, J.; Doležal, P.; Krystýnová, M.; Fintová, Stanislava; Zapletal, J.; Wasserbauer, J.; Ptáček, P.

    2017-01-01

    Roč. 7, č. 11 (2017), č. článku 461. ISSN 2075-4701 Institutional support: RVO:68081723 Keywords : magnesium * powder metallurgy * cold pressing * hot pressing * EIS (Electrochemical impedance spectroscopy) * three-point bending test * corrosion Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 1.984, year: 2016 http://www.mdpi.com/2075-4701/7/11/461

  6. Production of titanium alloys for advanced aerospace systems by powder metallurgy

    OpenAIRE

    Henriques, Vinicius André Rodrigues; Campos, Pedro Paulo de; Cairo, Carlos Alberto Alves; Bressiani, José Carlos

    2005-01-01

    Titanium alloys parts are ideally suited for advanced aerospace systems because of their unique combination of high specific strength at both room temperature and moderately elevated temperature, in addition to excellent corrosion resistance. Despite these features, use of titanium alloys in engines and airframes is limited by cost. The alloys processing by powder metallurgy eases the obtainment of parts with complex geometry. In this work, results of the Ti-6Al-4V and Ti-13Nb-13Zr alloys pro...

  7. Production of a low young modulus titanium alloy by powder metallurgy

    OpenAIRE

    Santos,Dalcy Roberto dos; Henriques,Vinicius André Rodrigues; Cairo,Carlos Alberto Alves; Pereira,Marcelo dos Santos

    2005-01-01

    Titanium alloys have several advantages over ferrous and non-ferrous metallic materials, such as high strengthto-weight ratio and excellent corrosion resistance. A blended elemental titanium powder metallurgy process has been developed to offer low cost commercial products. The process employs hydride-dehydride (HDH) powders as raw material. In this work, results of the Ti-35Nb alloy sintering are presented. This alloy due to its lower modulus of elasticity and high biocompatibility is a prom...

  8. A Comparison of the Plastic Flow Response of a Powder Metallurgy Nickel Base Superalloy (Postprint)

    Science.gov (United States)

    2017-04-01

    Materials The nickel-base, powder-metallurgy (PM) cc¢ super- alloy LSHR was used to establish the effect of test method on plastic -flow response under hot...of friction was estimated to lead to maximum errors in flow stress of the order of 3 pct for the sample geometry and height reduction used in the... plastic -flow behavior of LSHR (in effective stress-strain terms) was described using a phenomeno- logical relationship typical of those for

  9. Review of some past and present powder metallurgy programs at the Los Alamos Scientific Laboratory

    International Nuclear Information System (INIS)

    Sheinberg, H.

    1977-01-01

    Powder metallurgy programs at LASL are reviewed. Topics covered include: KIWI reactor fuel elements; Phoebus reactor fuel elements, criticality control and poison plate material, structural composites for fuel element supports, and heat shields for fuel element supports; thermionic emitter reactor uranium carbide--zirconium carbide fuel pins, and molybdenum--uranium oxide fuel pins; laser and electron beam fusion targets; and current work in MHD components

  10. Situation of radioactive wastes and their prevention and treatment measures in China's uranium mining and metallurgy

    International Nuclear Information System (INIS)

    Li Renjie.

    1988-01-01

    The sorts of radioactive wastes produced in uranium mining and metallurgy and their hazards are discribed in this paper. The characteristics of the radioactive wastes are discussed. The measurements and results are introduced for treatment and disposal of the radioactive wastes. The way to deal with prevention and treatment of radioactive wastes is presented in the stages of engineering design, construction, production and decommission of uranium mines and plants

  11. Extractive metallurgy of the beryllium; Fundamentos da metalurgia extrativa do berilio

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Neusa; Capocchi, Jose Deodoro Trani [Sao Paulo Univ., SP (Brazil). Escola Politecnica

    1995-07-01

    A bibliographic review is performed on the beryllium extractive metallurgy. The work describes the main type of ores and processes applied to the metallic beryllium production, beryllium oxide production using fluoride, sulfide and direct chlorination. The thermodynamic consideration are made on beryllium reduction processes, discussing the viability of the beryllium oxide and hallide reduction processes. Under the technological viewpoint, the Cu-Be alloys main production processes are discussed, and the main toxicity problems related with beryllium are mentioned 15 refs..

  12. Investigation of a thermoplastic-powder metallurgy process for the fabrication of porous niobium rods

    International Nuclear Information System (INIS)

    Nordin, D.R.

    1978-06-01

    The feasibility of using a thermoplastic-powder metallurgy technique for the fabrication of porous niobium rods was investigated. Some early problems were overcome to successfully extrude the polymer coated niobium powder into long lengths. The effects of certain process variables were investigated. Residual porosity and extrusion pressure were found to be regulated by the polymer fraction. The procedures for taking the extruded polystyrene--niobium rods through the heat treatments to the final, tin infiltrated stage are explained

  13. Students’ opinions about modern lecture: development path

    Directory of Open Access Journals (Sweden)

    Tatyana A. Astashova

    2017-01-01

    Full Text Available As an objective of the research, the author set the task of identifying students’ opinion and opinion of lecturers about the purpose of the lectures at the university, about the role of the lecturer and preferred form of lectures. As a result of the research, it was necessary to answer the following important questions: What are the objectives of the lecture and the role of the lecturer? Which lectures are more preferable: traditional or interactive? What do lecturers expect from the lecture, do they consider it an advantage or an unnecessary educational activity?The materials were developed for the survey (questionnaire to conduct the research and analyze the results obtained. The students were surveyed before training and after completion of the semester. The study involved 200 students of all areas of Mechanics and Technology Faculty of Novosibirsk State Technical University. Statistical analysis was used for the analysis of the results.As a result, the experiment revealed nonconformity of opinions of students about the purpose of the lecture and the role of a lecturer before the training and after the end of the semester. Lectures, according to students, should help to implement all kinds of practical and independent assignments.Educational standards imply a reduction in the hours of classroom training and an increase in independent work, and the majority of students are not ready (do not want to to study the materials on the topics of discipline completely independently or partially.It revealed a contradiction in opinion, what form of organization of the lecture classes is more interesting to students, which can increase the motivation of the visit and work on the lectures.The technology of designing the educational process in the conditions of the mixed training is proposed, applying the technological map.The technological map is presented in the form of stages of designing the educational process, including recommendations on the use of

  14. The Impact of Online Lecture Recordings on Student Performance

    Science.gov (United States)

    Williams, Andrew; Birch, Elisa; Hancock, Phil

    2012-01-01

    The use of online lecture recordings as a supplement to physical lectures is an increasingly popular tool at many universities. This paper combines survey data with student record data for students in a "Microeconomics Principles" class to examine the relative effects of lecture attendance and online lecture recordings. The main finding…

  15. Effect of repressing on the mechanical properties of the valve guides manufactured by powder metallurgy

    Directory of Open Access Journals (Sweden)

    Andrés Rodríguez-Spitia

    2017-03-01

    Full Text Available Characterization of hardness, mass loss, and friction coefficient, was carried out on valve guides for internal combustion engines, manufactured by powder metallurgy, with the aim of finding out if they fulfill the requirements of an internal combustion engine and to be mass produced. Currently available brass casting valve guides were used as comparative parameter. It was analyzed whether properties were present in a homogeneous way in the piece lengthwise; the additional repressing process carried out in the production line with respect to the sintered guides was evaluated. Therefore, Brinell, Vickers and dry slip pin-on-disk tests were done in order to determine the friction coefficient and the wear rate. Scanning electron microscopy SEM and the metallographic analysis were used to study the wear mechanism, chemical composition of the guides, and the effect of repressing -quantifying the porosity. It was clear that these pieces manufactured by powder metallurgy process showed lower values in their mechanical-tribological properties compared to commercially available valve guides taken as reference. With these results, the company which manufactures the guides by powder metallurgy will make some adjustments suggested for the parameters at the guide’s production line.

  16. Manufacture of good-weldable low oxygen molybdenum by powder metallurgy

    International Nuclear Information System (INIS)

    Hiraoka, Yutaka; Okada, Masatoshi; Akiyama, Takashi; Yamafuchi, Yasuo.

    1984-01-01

    In general most of commercial molybdenum is produced by the powder metallurgy method and is utilized as a superior heat-resisting material in many fields. Moreover, molybdenum is expected to be used as the first-wall components of JT-60 (JAERI Tokamak-60). However, one of major problems on molybdenum, particularly on powder metallurgy molybdenum, is that any sound welded joint is hard to be obtainable. In many cases weld pores are formed on welding and, therefore, ductility of the welded joint is severely degraded. The object of the present work is to get a sound welded joint without any weld pores by reducing impurity levels in the material. The materials were produced by modifying one or several parts in the ordinary manufacturing process of powder metallurgy molybdenum. Oxygen, nitrogen, carbon and other principal metallic impurities were chemically analysed. The above materials were then subjected to electron-beam-welding by using a melt-run technique, and the soundness of the welded joints was examined by optical microscopy. (author)

  17. Properties of WZ21 (%wt) alloy processed by a powder metallurgy route.

    Science.gov (United States)

    Cabeza, Sandra; Garcés, Gerardo; Pérez, Pablo; Adeva, Paloma

    2015-06-01

    Microstructure, mechanical properties and corrosion behaviour of WZ21 (%wt) alloy prepared by a powder metallurgy route from rapidly solidified powders have been studied. Results were compared to those of the same alloy prepared through a conventional route of casting and extrusion. The microstructure of the extruded ingot consisted of α-Mg grains and Mg3Zn3Y2 (W-phase) and LPSO-phase particles located at grain boundaries. Moreover, stacking faults were also observed within α-Mg grains. The alloy processed by the powder metallurgy route exhibited a more homogeneous and finer microstructure, with a grain size of 2 μm. In this case W-phase and Mg24Y5 phase were identified, but not the LPSO-phase. The microstructural refinement induced by the use of rapidly solidified powders strengthened the alloy at room temperature and promoted superplasticity at higher strain rates. Corrosion behaviour in PBS medium evidenced certain physical barrier effect of the almost continuous arrangements of second phases aligned along the extrusion direction in conventionally processed WZ21 alloy, with a stable tendency around 7 mm/year. On the other hand, powder metallurgy processing promoted significant pitting corrosion, inducing accelerated corrosion rate during prolonged immersion times. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. A millennium of metallurgy recorded by lake sediments from Morococha, Peruvian Andes.

    Science.gov (United States)

    Cooke, Colin A; Abbott, Mark B; Wolfe, Alexander P; Kittleson, John L

    2007-05-15

    To date, information concerning pre-Colonial metallurgy in South America has largely been limited to the archaeological record of artifacts. Here, we reconstruct a millennium of smelting activity in the Peruvian Andes using the lake-sediment stratigraphy of atmospherically derived metals (Pb, Zn, Cu, Ag, Sb, Bi, and Ti) and lead isotopic ratios (206Pb/ 207Pb) associated with smelting from the Morococha mining region in the central Peruvian Andes. The earliest evidence for metallurgy occurs ca. 1000 A.D., coinciding with the fall of the Wari Empire and decentralization of local populations. Smelting during this interval appears to have been aimed at copper and copper alloys, because of large increases in Zn and Cu relative to Pb. A subsequent switch to silver metallurgy under Inca control (ca. 1450 to conquest, 1533 A.D.) is indicated by increases in Pb, Sb, and Bi, a conclusion supported by further increases of these metals during Colonial mining, which targeted silver extraction. Rapid development of the central Andes during the 20th century raised metal burdens by an order of magnitude above previous levels. Our results represent the first evidence for pre-Colonial smelting in the central Peruvian Andes, and corroborate the sensitivity of lake sediments to pre-Colonial metallurgical activity suggested by earlier findings from Bolivia.

  19. Argonne lectures on particles accelerator magnets

    International Nuclear Information System (INIS)

    Devred, A.

    1999-09-01

    The quest for elementary particles has promoted the development of particle accelerators producing beams of increasingly higher energies. In a synchrotron, the particle energy is directly proportional to the product of the machine's radius times the bending magnets' field strength. Present proton experiments at the TeV scale require facilities with circumferences ranging from a few to tens of kilometers and relying on a large number (several hundred to several thousand) high field dipole magnets and high field gradient quadrupole magnets. These electro-magnets use high-current-density, low-critical-temperature superconducting cables and are cooled down at liquid helium temperature. They are among the most costly and the most challenging components of the machine. After explaining what are the various types of accelerator magnets and why they are needed (lecture 1), we briefly recall the origins of superconductivity and we review the parameters of existing superconducting particle accelerators (lecture 2). Then, we review the superconducting materials that are available at industrial scale (chiefly, NbTi and Nb 3 Sn) and we explain in details the manufacturing of NbTi wires and cables (lecture 3). We also present the difficulties of processing and insulating Nb 3 Sn conductors, which so far have limited the use of this material in spite of its superior performances. We continue by discussing the two dimensional current distributions which are the most appropriate for generating pure dipole and quadrupole fields and we explain how these ideal distributions can be approximated by so called cosθ and cos 2θ coil designs (lecture 4). We also present a few alternative designs which are being investigated and we describe the difficulties of realizing coil ends. Next, we present the mechanical design concepts that are used in existing accelerator magnets (lecture 5) and we describe how the magnets are assembled (lecture 6). Some of the toughest requirements on the

  20. Argonne lectures on particles accelerator magnets

    Energy Technology Data Exchange (ETDEWEB)

    Devred, A

    1999-09-01

    The quest for elementary particles has promoted the development of particle accelerators producing beams of increasingly higher energies. In a synchrotron, the particle energy is directly proportional to the product of the machine's radius times the bending magnets' field strength. Present proton experiments at the TeV scale require facilities with circumferences ranging from a few to tens of kilometers and relying on a large number (several hundred to several thousand) high field dipole magnets and high field gradient quadrupole magnets. These electro-magnets use high-current-density, low-critical-temperature superconducting cables and are cooled down at liquid helium temperature. They are among the most costly and the most challenging components of the machine. After explaining what are the various types of accelerator magnets and why they are needed (lecture 1), we briefly recall the origins of superconductivity and we review the parameters of existing superconducting particle accelerators (lecture 2). Then, we review the superconducting materials that are available at industrial scale (chiefly, NbTi and Nb{sub 3}Sn) and we explain in details the manufacturing of NbTi wires and cables (lecture 3). We also present the difficulties of processing and insulating Nb{sub 3}Sn conductors, which so far have limited the use of this material in spite of its superior performances. We continue by discussing the two dimensional current distributions which are the most appropriate for generating pure dipole and quadrupole fields and we explain how these ideal distributions can be approximated by so called cos{theta} and cos 2{theta} coil designs (lecture 4). We also present a few alternative designs which are being investigated and we describe the difficulties of realizing coil ends. Next, we present the mechanical design concepts that are used in existing accelerator magnets (lecture 5) and we describe how the magnets are assembled (lecture 6). Some of the toughest

  1. Why Radiotherapy Works. Chapter 6

    International Nuclear Information System (INIS)

    Tashiro, S.; Nishibuchi, I.; Wondergem, J.

    2017-01-01

    The history of radiotherapy began in 1895, when Röntgen discovered X rays, and in the following year, radiation was used for medical treatment. In the early days, the development of radiotherapy was based extensively on empiricism. Radiotherapists worked closely with radiation biologists in attempting to describe and understand the phenomena produced by ionizing radiation in the clinic and in biological systems. During the ensuing 120 years, radiotherapy has been improved significantly and, in addition to radiation biology, medical physics has played an important role in the design and development of equipment, quality assurance and dosimetry. Over recent decades, advances have been made in the field of molecular biology. Currently available techniques enable us to elucidate the molecular mechanisms of cellular response to ionizing irradiation, and it is anticipated that the role and contributions of radiation biology in radiotherapy will remain relevant. This chapter describes the clinically important biological points, including knowledge from current molecular biology.

  2. Defining groundwater age. Chapter 3

    International Nuclear Information System (INIS)

    Torgersen, T.; Purtschert, R.; Phillips, F.M.; Plummer, L.N.; Sanford, W.E.; Suckow, A.

    2013-01-01

    This book investigates applications of selected chemical and isotopic substances that can be used to recognize and interpret age information pertaining to ‘old’ groundwater (defined as water that was recharged on a timescale from approximately 1000 to more than 1 000 000 a). However, as discussed below, only estimates of the ‘age’ of water extracted from wells can be inferred. These groundwater age estimates are interpreted from measured concentrations of chemical and isotopic substances in the groundwater. Even then, there are many complicating factors, as discussed in this book. In spite of these limitations, much can be learned about the physics of groundwater flow and about the temporal aspects of groundwater systems from age interpretations of measured concentrations of environmental tracers in groundwater systems. This chapter puts the concept of ‘age’ into context, including its meaning and interpretation, and attempts to provide a unifying usage for the rest of the book.

  3. Different Patterns of University Students' Integration of Lecture Podcasts, Learning Materials, and Lecture Attendance in a Psychology Course

    Science.gov (United States)

    Luttenberger, Silke; Macher, Daniel; Maidl, Verena; Rominger, Christian; Aydin, Nilüfer; Paechter, Manuela

    2018-01-01

    Lecture podcasts are considered an efficient means for passing on learning contents to students, most notably in lectures with large numbers of students. Here, the lecturer's presentation, combined with lecture slides, is recorded and broadcasted in video form. The present study investigates how students organize learning when they have the choice…

  4. Envisioning the Transformative Role of IT in Lectures

    Directory of Open Access Journals (Sweden)

    Telmo Zarraonandia

    2013-02-01

    Full Text Available One of the most widely used methods for teaching is the lecture. During the last few decades lecturers and students have taken advantage of the progressive introduction of new technology for supporting these lectures. As this trend is very likely to continue, in this paper we will try to anticipate some possible technology enriched future lecture scenarios. We also present ALFs, a system which aims to improve the communication between participants in a lecture making use of augmented reality techniques.

  5. Reaction Lecture : Text Messaging to Increase Student Engagement in Large-Scale Lectures

    NARCIS (Netherlands)

    Winnips, Koos; Heutink, Joost; Beldhuis, Hans; Greener, S; Rospigliosi, A

    2011-01-01

    By helping to be active during large scale lectures, students remember better what is presented, and can better connect new knowledge to entry knowledge. In large scale lectures with more than 150 students, it is nearly impossible to manage personal, face-to-face discussions and interaction. Based

  6. Characteristics of good mathematics lecturers based on students and lecturers perspectives

    Science.gov (United States)

    Hapsari, Trusti; Putri, Dian Permana; Raharjo, Jajo Firman

    2017-05-01

    This study aims to determine the characteristics of good mathematics lecturers based on students' and lecturers' perspectivesand compare the characteristics of good lecturers/ teachers which are in accordance with the findings of some previous studies and the theories. This study is survey study. The Data were collected through questionnaires and interview. The population consists of some mathematics students from the first level through the third level and some mathematics education lecturers of a private university in West Java. Qualitative analysis was undertaken to examine the results of questionnaires and interviews. The finding shows that the characteristic of good mathematics lecturers is inspiring. They can inspire other mathematics lecturers and educators in general. Based on the students and lecturers' perspective, some characteristics of good mathematics lecturers are mastering the materials well, being on time, being objective, understanding the students, presenting the materials with clearly, and being disciplined. Some other characteristic mentioned are: teaching eagerly, being unhurried, being friendly, giving exemplary and preparing the lesson well. These characteristics are not much different from the characteristics described by some previous researchers and some theories of experts, i.e. mastering the subject matters well, pedagogic, and work wholeheartedly.

  7. Lecture-Recording Technology in Higher Education: Exploring Lecturer and Student Views across the Disciplines

    Science.gov (United States)

    Dona, Kulari Lokuge; Gregory, Janet; Pechenkina, Ekaterina

    2017-01-01

    This paper presents findings of an institutional case study investigating how students and lecturers experienced a new opt-out, fully integrated lecture-recording system which enabled audio and presentation screen capture. The study's focus is on how "traditional" students (generally characterised as young, enrolled full-time and…

  8. Modeling and simulation in the systems engineering life cycle core concepts and accompanying lectures

    CERN Document Server

    Loper, Margaret L

    2015-01-01

    This easy to read text/reference provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Each chapter corresponds to a short lecture covering a core topic in M&S or systems engineering.  Topics and features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from renowned specialists in each topic covered; introduces the foundational elements and proce

  9. Chapter 3 - At the roadside: Forest resources

    Science.gov (United States)

    Bryce Stokes; Timothy G. Rials; Leonard R. Johnson; Karen L. Abt; Prakash Nepal; Kenneth E. Skog; Robert C. Abt; Lixia He; Burton C. English

    2016-01-01

    Chapter 3 assesses the availability of forest resources to the roadside. Not all woody feedstocks are discussed in this chapter. Logging residues and wholetree biomass are included. Other feedstock categories have been moved to chapter 5 or are redefined to be included in the whole-tree biomass category. New methodologies and data are used in the assessment to

  10. Interactive lectures: Clickers or personal devices?

    Science.gov (United States)

    Morrell, Lesley J; Joyce, Domino A

    2015-01-01

    Audience response systems ('clickers') are frequently used to promote participation in large lecture classes, and evidence suggests that they convey a number of benefits to students, including improved academic performance and student satisfaction. The limitations of these systems (such as limited access and cost) can be overcome using students' personal electronic devices, such as mobile phones, tablets and laptops together with text message, web- or app-based polling systems. Using questionnaires, we compare student perceptions of clicker and smartphone based polling systems. We find that students prefer interactive lectures generally, but those that used their own device preferred those lectures over lectures using clickers. However, device users were more likely to report using their devices for other purposes (checking email, social media etc.) when they were available to answer polling questions. These students did not feel that this distracted them from the lecture, instead, concerns over the use of smartphones centred around increased battery usage and inclusivity for students without access to suitable technology. Our results suggest that students generally preferred to use their own devices over clickers, and that this may be a sensible way to overcome some of the limitations associated with clickers, although issues surrounding levels of distraction and the implications for retention and recall of information need further investigation.

  11. Active Learning in ASTR 101 Lectures

    Science.gov (United States)

    Deming, Grace L.

    1998-12-01

    The lecture is the most common teaching method used at colleges and universities, but does this format facilitate student learning? Lectures can be brilliantly delivered, but they are received by a passive audience. As time passes during a lecture, student attention and effective notetaking diminish. Many students become more interested in a subject and retain information longer in courses that rely on active rather than passive teaching methods. Interactive teaching strategies such as the think-pair-share-(write), the 3-minute paper, and the misconception confrontation can be used to actively engage students during lecture. As a cooperative learning strategy, the think-pair-share-(write) technique requires active discussion by everyone in the class. The "write" component structures individual accountability into the activity. The 3-minute paper is an expansion of the standard 1-minute paper feedback technique, but is required of all students rather than voluntary or anonymous. The misconception confrontation technique allows students to focus on how their pre- conceived notions differ from the scientific explanation. These techniques can be easily adopted by anyone currently using a standard lecture format for introductory astronomy. The necessary components are a commitment by the instructor to require active participation by all students and a willingness to try new teaching methods.

  12. Professionalism of Lecturers at Faculty of Education

    Science.gov (United States)

    Tangkere, T. F. S.; Langitan, F. W.; Maukar, S. M. D.; Roring, R. F.

    2018-02-01

    The main objective of this research was to get the picture pertaining to the professionalization of Lecturers at Faculty of Education in Manado State University, Indonesia. The research method was naturalistic inquiry with qualitative approach. The research techniques were: deep interview, participative observation and document study. The data were analyzed by: data reduction, data display and conclusions, while the validation of data was done by four criteria, namely: credibility, transferability, dependability and conformability. The collecting procedure and data recording were done through observation and interviews. From the findings and conclusions, it can be identified that professionalization of Lecturers at Faculty of Education in Manado State University has been well processed. This can be proved by fulfillment of the minimum academic standard Ninety-one out of the total l12 lecturers has been certified. Based on conclusions, the researcher recommends that the teacher always develop their capability through increasing their academic qualification, self-development through attending educational trainings, conducting more research and publishing those researches through accredited journals. Dean of every Faculty and also execute supporting activities which will support self-development of the lectures and increase the budget for research of the lecturers.

  13. The Web-Lecture - a viable alternative to the traditional lecture format?

    Science.gov (United States)

    Meibom, S.

    2004-12-01

    Educational research shows that students learn best in an environment with emphasis on teamwork, problem-solving, and hands-on experience. Still professors spend the majority of their time with students in the traditional lecture-hall setting where the combination of large classes and limited time prevents sufficient student-teacher interaction to foster an active learning environment. Can modern computer technology be used to provide "lecture-type" information to students via the World Wide Web? If so, will that help professors make better and/or different use of their scheduled time with the students? Answering these questions was the main motivation for the Extra-Solar Planet Project. The Extra-Solar Planet Project was designed to test the effectiveness of a lecture available to the student on the World Wide Web (Web-Lecture) and to engage the students in an active learning environment were their use the information presented in the Web-Lecture. The topic of the Web-Lecture was detection of extra-solar planets and the project was implemented into an introductory astronomy course at University of Wisconsin Madison in the spring of 2004. The Web-Lecture was designed to give an interactive presentation of synchronized video, audio and lecture notes. It was created using the eTEACH software developed at the University of Wisconsin Madison School of Engineering. In my talk, I will describe the project, show excerpts of the Web-Lecture, and present assessments of student learning and results of student evaluations of the web-lecture format.

  14. Vocal intensity in lecturers: Results of measurements conducted during lecture sessions

    Directory of Open Access Journals (Sweden)

    Witold Mikulski

    2013-12-01

    Full Text Available Background: Occupational voice users (inter alia: lecturers speak with different levels of vocal intensity. Speakers adjust this intensity knowingly (e.g. to underline the importance of fragments of the speech or unknowingly. The unknown adjustment of voice intensity occurs e.g. in the presence of high acoustic background noise (so-called Lombard effect, but it also results from many other factors: hearing loss, construction of the vocal tract, habits and others. The aim of the article is to confirm the thesis that in similar conditions of acoustic properties of the room different lecturers speak with different levels of vocal intensity. Materials and Methods: The study was conducted in a group of 10 lecturers in the same conference room. A-weighted sound pressure level determined at 1 m from the lecturer's mouth was adopted as a parameter defining the intensity of the lecturer's voice. The levels of all lecturers' voice intensity were compared and evaluated according to the criteria defined in EN ISO 9921. Results: Nine in ten lecturers were speaking with normal voice intensity (60-65 dB and only one full-time university lecturer was speaking with raised voice (66-71 dB. Conclusions: It was found that in the room of the same acoustic conditions the lecturers spoke with different intensities of voice. Some lecturers occasionally, and one all the time spoke with the voice intensity specified by PN-EN ISO 9921 as a raised voice. The results of the preliminary study warrant further studies in a larger group of teachers. Med Pr 2013;64(6:797–804

  15. Lectures on formal and rigid geometry

    CERN Document Server

    Bosch, Siegfried

    2014-01-01

    A first version of this work appeared in 2005 as a Preprint of the Collaborative Research Center "Geometrical Structures in Mathematics" at the University of Münster. Its aim was to offer a concise and self-contained 'lecture-style' introduction to the theory of classical rigid geometry established by John Tate, together with the formal algebraic geometry approach launched by Michel Raynaud. These Lectures are now viewed commonly as an ideal means of learning advanced rigid geometry, regardless of the reader's level of background. Despite its parsimonious style, the presentation illustrates a number of key facts even more extensively than any other previous work. This Lecture Notes Volume is a revised and slightly expanded version of the original preprint and has been published at the suggestion of several experts in the field.

  16. Optoelectronic lessons as an interdisciplinary lecture

    Science.gov (United States)

    Wu, Dan; Wu, Maocheng; Gu, Jihua

    2017-08-01

    It is noticed that more and more students in college are passionately curious about the optoelectronic technology, since optoelectronic technology has advanced extremely quickly during the last five years and its applications could be found in a lot of domains. The students who are interested in this area may have different educational backgrounds and their majors cover science, engineering, literature and social science, etc. Our course "History of the Optoelectronic Technology" is set up as an interdisciplinary lecture of the "liberal education" at our university, and is available for all students with different academic backgrounds from any departments of our university. The main purpose of the course is to show the interesting and colorful historical aspects of the development of this technology, so that the students from different departments could absorb the academic nourishment they wanted. There are little complex derivations of physical formulas through the whole lecture, but there are still some difficulties about the lecture which is discussed in this paper.

  17. Mathematical omnibus thirty lectures on classic mathematics

    CERN Document Server

    Fuchs, Dmitry; Fuchs, Dmitry

    2007-01-01

    The book consists of thirty lectures on diverse topics, covering much of the mathematical landscape rather than focusing on one area. The reader will learn numerous results that often belong to neither the standard undergraduate nor graduate curriculum and will discover connections between classical and contemporary ideas in algebra, combinatorics, geometry, and topology. The reader's effort will be rewarded in seeing the harmony of each subject. The common thread in the selected subjects is their illustration of the unity and beauty of mathematics. Most lectures contain exercises, and solutions or answers are given to selected exercises. A special feature of the book is an abundance of drawings (more than four hundred), artwork by an accomplished artist, and about a hundred portraits of mathematicians. Almost every lecture contains surprises for even the seasoned researcher.

  18. Lectures in the history of mathematics

    CERN Document Server

    Bos, Henk J M

    1993-01-01

    "[These lectures] are about themes of the history of mathematics which, for various reasons, are dear to me. The early differential and integral calculus, the work of Christiaan Huygens, and the concept of construction in seventeenth- and eighteenth-century mathematics are the three themes around which much of my research has concentrated and which continue to fascinate me by the insights they offer in the development of that special human activity called mathematics." -from the Introduction This volume contains eleven lectures ranging over a variety of topics in the history of mathematics. The lectures, presented between 1970 and 1987, were delivered in a variety of venues and appeared only in less accessible publications. Those who teach mathematics, as well as mathematics historians, will appreciate this insightful, wide-ranging book.

  19. Professional development of international classroom lecturers

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.

    With a rapidly growing number of students learning and lecturers teaching through a language other than their own first language, there is equally a growing need to consider how lecturers are trained to teach in the international classroom where students have a range of different linguistic...... through a language other than their own first language to students who also learn through what for them is a second or third language. As part of a survey conducted by the IntlUni Erasmus Academic Network project in 2013, 38 Higher Education institutions in 27 countries were asked to which extent...... rationales, content, structure, target groups, etc. It is therefore difficult to get a clear picture and to compare programmes and their impact (cf. e.g. Simon & Pleschová 2013). When it comes to the teachers of international programmes, the picture becomes even more complicated. Lecturers often teach...

  20. Explicit constructivism: a missing link in ineffective lectures?

    Science.gov (United States)

    Prakash, E S

    2010-06-01

    This study tested the possibility that interactive lectures explicitly based on activating learners' prior knowledge and driven by a series of logical questions might enhance the effectiveness of lectures. A class of 54 students doing the respiratory system course in the second year of the Bachelor of Medicine and Bachelor of Surgery program in my university was randomized to two groups to receive one of two types of lectures, "typical" lectures (n = 28, 18 women and 10 men) or "constructivist" lectures (n = 26, 19 women and 7 men), on the same topic: the regulation of respiration. Student pretest scores in the two groups were comparable (P > 0.1). Students that received the constructivist lectures did much better in the posttest conducted immediately after the lectures (6.8 +/- 3.4 for constructivist lectures vs. 4.2 +/- 2.3 for typical lectures, means +/- SD, P = 0.004). Although both types of lectures were well received, students that received the constructivist lectures appeared to have been more satisfied with their learning experience. However, on a posttest conducted 4 mo later, scores obtained by students in the two groups were not any different (6.9 +/- 3 for constructivist lectures vs. 6.9 +/- 3.7 for typical lectures, P = 0.94). This study adds to the increasing body of evidence that there is a case for the use of interactive lectures that make the construction of knowledge and understanding explicit, easy, and enjoyable to learners.

  1. Chapter 2. The production units

    International Nuclear Information System (INIS)

    1998-01-01

    In the second chapter of this CD ROM the production units of the Slovak Electric, Plc. (Slovenske elektrarne, a.s.), are presented. It consist of next paragraphs: (1) Nuclear power plants (A-1 Nuclear Power Plant (History, Technological scheme, basic data are presented); V-1, V-2 Bohunice Nuclear Power Plant (History 1972-1985, technological scheme; nuclear safety, radiation protection, heat supply, international co-operation and basic data are presented); Mochovce Nuclear Power Plant (History 1980-1998, technological scheme, construction completion, milestones of commissioning, safety and environmental protection as well as basic data are included). (2) Conventional sources of energy (Vojany fossil power plant (History 1959-1992, Technological units of power plant, Impact of operation on the environment, Plant of Vojany FPP Renewal and Reconstruction, Basic data are listed), Novaky fossil power plant (History 1949-1998, Technological scheme, current investment construction, basic data, Handlova heating plant). Kosice Combined Heat Power Plant (History 1960-1995, technological scheme, State metrology centre, acredited chemical laboratory, basic data). (3) Hydroelectric power plants (Trencin HPPs: Cierny Vah pumped storage HPP, Liptovska Mara HPP, Orava HPP, Sucany HPP, Miksova HPP, Nosice HPP, Velke Kozmalovce HPP, Gabcikovo HPP, Dubnica HPP, Nove Mesto n/V HPP, Madunice HPP, Kralova HPP) and Dobsina HPPs: (Dobsina HPP, Ruzin HPP, Domasa HPP, small HPPs) are presented

  2. Chapter 12: Human microbiome analysis.

    Directory of Open Access Journals (Sweden)

    Xochitl C Morgan

    Full Text Available Humans are essentially sterile during gestation, but during and after birth, every body surface, including the skin, mouth, and gut, becomes host to an enormous variety of microbes, bacterial, archaeal, fungal, and viral. Under normal circumstances, these microbes help us to digest our food and to maintain our immune systems, but dysfunction of the human microbiota has been linked to conditions ranging from inflammatory bowel disease to antibiotic-resistant infections. Modern high-throughput sequencing and bioinformatic tools provide a powerful means of understanding the contribution of the human microbiome to health and its potential as a target for therapeutic interventions. This chapter will first discuss the historical origins of microbiome studies and methods for determining the ecological diversity of a microbial community. Next, it will introduce shotgun sequencing technologies such as metagenomics and metatranscriptomics, the computational challenges and methods associated with these data, and how they enable microbiome analysis. Finally, it will conclude with examples of the functional genomics of the human microbiome and its influences upon health and disease.

  3. Algorithms and Data Structures (lecture 1)

    CERN Document Server

    CERN. Geneva

    2018-01-01

    Algorithms have existed, in one form or another, for as long as humanity has. During the second half of the 20th century, the field was revolutionised with the introduction of ever faster computers. In these lectures we discuss how algorithms are designed, how to evaluate their speed, and how to identify areas of improvement in existing algorithms. An algorithm consists of more than just a series of instructions; almost as important is the memory structure of the data on which it operates. A part of the lectures will be dedicated to a discussion of the various ways one can store data in memory, and their advantages and disadvantages.

  4. Algorithms and Data Structures (lecture 2)

    CERN Document Server

    CERN. Geneva

    2018-01-01

    Algorithms have existed, in one form or another, for as long as humanity has. During the second half of the 20th century, the field was revolutionised with the introduction of ever faster computers. In these lectures we discuss how algorithms are designed, how to evaluate their speed, and how to identify areas of improvement in existing algorithms. An algorithm consists of more than just a series of instructions; almost as important is the memory structure of the data on which it operates. A part of the lectures will be dedicated to a discussion of the various ways one can store data in memory, and their advantages and disadvantages.

  5. Various chapter styles for the memoir class

    DEFF Research Database (Denmark)

    Madsen, Lars

    2012-01-01

    Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded.......Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded....

  6. Chapter 6. Landscape Analysis for Habitat Monitoring

    Science.gov (United States)

    Samuel A. Cushman; Kevin McGarigal; Kevin S. McKelvey; Christina D. Vojta; Claudia M. Regan

    2013-01-01

    The primary objective of this chapter is to describe standardized methods for measur¬ing and monitoring attributes of landscape pattern in support of habitat monitoring. This chapter describes the process of monitoring categorical landscape maps in which either selected habitat attributes or different classes of habitat quality are represented as different patch types...

  7. Chapter 1: Standard application in photon dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Peixoto, Jose Guilherme Pereira; Potiens, Maria da Penha

    2014-07-01

    Chapter 1 presents: The proprieties; Absolute dosimeter; Traceable dosimeter; Secondary standard dosimeters and their characterization: ionization chamber properties and Ionization chambers (shape and volume); Calibration method: substitute method, tip-to-tip method and known radiation field or Dosimetry method and Calibration results related to chapter 1 are presented.

  8. Do prerecorded lecture VODcasts affect lecture attendance of first-yearpre-clinical Graduate Entry to Medicine students?

    Science.gov (United States)

    Rae, Mark G; O'Malley, Dervla

    2017-03-01

    There is increasing concern amongst educators that the provision of recorded lectures may reduce student attendance of live lectures. We therefore sought to determine if the provision of prerecorded lecture video podcasts (VODcasts) to first-year Graduate Entry to Medicine (GEM) students, affected attendance at 21 Physiology lectures within three separate pre-clinical modules. Data on lecture attendance, utilization of VODcasts, and whether VODcasts should replace live lectures were drawn from three surveys conducted in academic years 2014-2015 and 2015-2016 on all first-year GEM students in two first-year pre-clinical modules where prerecorded Physiology VODcasts were available for viewing or downloading prior to scheduled live lectures. A total of 191/214 (89%) students responded to the three surveys, with 84.3% of students attending all 21 lectures in the study. Only 4% of students missed more than one lecture in each of the three lecture series, with 79% indicating that VODcasts should not replace lectures. Therefore, we conclude that the attendance of pre-clinical GEM students at live lectures is not significantly impacted upon by the provision of lecture VODcasts, with most students viewing them as useful revision tools rather than as a replacement for live lectures.

  9. Chapter 17: Estimating Net Savings: Common Practices

    Energy Technology Data Exchange (ETDEWEB)

    Violette, D. M.; Rathbun, P.

    2014-09-01

    This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM&V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to particular program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings, but does not prescribe particular methods.

  10. Chapter 1: Biomedical knowledge integration.

    Directory of Open Access Journals (Sweden)

    Philip R O Payne

    Full Text Available The modern biomedical research and healthcare delivery domains have seen an unparalleled increase in the rate of innovation and novel technologies over the past several decades. Catalyzed by paradigm-shifting public and private programs focusing upon the formation and delivery of genomic and personalized medicine, the need for high-throughput and integrative approaches to the collection, management, and analysis of heterogeneous data sets has become imperative. This need is particularly pressing in the translational bioinformatics domain, where many fundamental research questions require the integration of large scale, multi-dimensional clinical phenotype and bio-molecular data sets. Modern biomedical informatics theory and practice has demonstrated the distinct benefits associated with the use of knowledge-based systems in such contexts. A knowledge-based system can be defined as an intelligent agent that employs a computationally tractable knowledge base or repository in order to reason upon data in a targeted domain and reproduce expert performance relative to such reasoning operations. The ultimate goal of the design and use of such agents is to increase the reproducibility, scalability, and accessibility of complex reasoning tasks. Examples of the application of knowledge-based systems in biomedicine span a broad spectrum, from the execution of clinical decision support, to epidemiologic surveillance of public data sets for the purposes of detecting emerging infectious diseases, to the discovery of novel hypotheses in large-scale research data sets. In this chapter, we will review the basic theoretical frameworks that define core knowledge types and reasoning operations with particular emphasis on the applicability of such conceptual models within the biomedical domain, and then go on to introduce a number of prototypical data integration requirements and patterns relevant to the conduct of translational bioinformatics that can be addressed

  11. Lectures in quantum mechanics a two-term course

    CERN Document Server

    Picasso, Luigi E

    2016-01-01

    Based on a series of university lectures on nonrelativistic quantum mechanics, this textbook covers a wide range of topics, from the birth of quantum mechanics to the fine-structure levels of heavy atoms. The author sets out from the crisis in classical physics and explores the seminal ideas of Einstein, Bohr, and de Broglie and their vital importance for the development of quantum mechanics. There follows a bottom-up presentation of the postulates of quantum mechanics through real experiments (such as those of neutron interferometry), with consideration of their most important consequences, including applications in the field of atomic physics. A final chapter is devoted to the paradoxes of quantum mechanics, and particularly those aspects that are still open and hotly debated, to end up with a mention to Bell's theorem and Aspect's experiments. In presenting the principles of quantum mechanics in an inductive way, this book has already proved very popular with students in its Italian language version.It c...

  12. Functional dependency between the logistics security system and the MySAP ERP in metallurgy

    Directory of Open Access Journals (Sweden)

    P. Ranitović

    2013-10-01

    Full Text Available MySAP ERP - Enterprise Resource Planning (system - solution which provides a whole set of functions for the business analytics, finance, human resources management, logistics and corporate services has developed from SAP R/3. It is one of the main products of the SAP AG German multinational company and as such, it is a very important element of the international industrial and technological security system. By defining the functional dependency between the security systems (logistics security systems and the IT (My SAP ERP systems in metallurgy, a concept for designing MY SAP ERP system in metallurgic industry is defined, based on the security aspects.

  13. Physical metallurgy: Scientific school of the Academician V.M. Schastlivtsev

    Science.gov (United States)

    Tabatchikova, T. I.

    2016-04-01

    This paper is to honor Academician Vadim Mikhailovich Schastlivtsev, a prominent scientist in the field of metal physics and materials science. The article comprises an analysis of the topical issues of the physical metallurgy of the early 21st century and of the contribution of V.M. Schastlivtsev and of his school to the science of phase and structural transformations in steels. In 2015, Vadim Mikhailovich celebrates his 80th birthday, and this paper is timed to this honorable date. The list of his main publications is given in it.

  14. Metallurgy of mercury in Almaden: from aludel furnaces until Pacific furnaces

    International Nuclear Information System (INIS)

    Tejero-Manzanares, J.; Garrido Saenz, I.; Mata Cabrera, F.; Rubio Mesas, M. L.

    2014-01-01

    This paper shows the different types of furnaces for roasting cinnabar, used in the metallurgy of quicksilver over the centuries of exploitation of the Almaden Mines (Spain). Some of these techniques are part of our industrial heritage. They have contributed to name UNESCO World Heritage Site the vast technological legacy of these mines recently. This research contributes to close the long way of metallurgical activity from aludel furnaces until Pacif furnaces, first and lasted technology to produce on an industrial scale. It is delved into the most relevant aspects having to do with the type, evolution and number of furnaces existing on each of the periods. (Author)

  15. Proceedings of the III International Congress of Mining and Metallurgy MINEMETAL 2016

    International Nuclear Information System (INIS)

    2016-10-01

    The III International Congress of Mining and Metallurgy was inaugurated at the Plaza América Convention Center in Varadero. Professionals from 16 countries come together to promote scientific exchange for sustainable mining and to make concrete future investments to boost the development of this important sector in Cuba. Among the topics that will occupy the agenda of these days of congress stand out the development of geology, new technological processes, advances in the application of zeolite, sustainable development and care of the environment.

  16. Accelerated Near-Threshold Fatigue Crack Growth Behavior of an Aluminum Powder Metallurgy Alloy

    Science.gov (United States)

    Piascik, Robert S.; Newman, John A.

    2002-01-01

    Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low DK, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels of Kmax (Kmax less than 0.4 KIC). Detailed fractographic analysis correlates accelerated FCG with the formation of crack-tip process zone micro-void damage. Experimental results show that the near threshold and Kmax influenced accelerated crack growth is time and temperature dependent.

  17. Engineering Lecturers' Views on CLIL and EMI

    Science.gov (United States)

    Aguilar, Marta

    2017-01-01

    The present study aims to shed some light on how engineering lecturers teaching in English at a Spanish university view their work (teaching goals) within the current European internationalisation trend of offering courses and master programmes in English. A questionnaire where content and language integrated learning (CLIL) and English-medium…

  18. Extraversion, conscientiousness, goal management and lecturing ...

    African Journals Online (AJOL)

    The study investigated the influence of personality factors (extraversion and conscientiousness) on goal management of university lecturers in south-western Nigeria. The survey method was adopted in this study, using purposive sampling technique to select four universities in the south western part of Nigeria. A total of 600 ...

  19. Lecturing style teaching and student performance

    NARCIS (Netherlands)

    van Klaveren, C.

    2011-01-01

    Teachers in the Netherlands tend to spend less time in front of the class, and often adopt a more personal approach. This allows them to better adjust their lecturing style to the needs of the individual student with the aim of increasing student performance. However, a more personal approach is

  20. Lecture notes for Advanced Time Series Analysis

    DEFF Research Database (Denmark)

    Madsen, Henrik; Holst, Jan

    1997-01-01

    A first version of this notes was used at the lectures in Grenoble, and they are now extended and improved (together with Jan Holst), and used in Ph.D. courses on Advanced Time Series Analysis at IMM and at the Department of Mathematical Statistics, University of Lund, 1994, 1997, ...

  1. Lectures Abandoned: Active Learning by Active Seminars

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Corry, Aino Vonge

    2012-01-01

    engi- neering course in software architecture to employ a range of active learning techniques. The course was constrained by the study administration's traditional assignment of a three hour lecturing slot and as such we had to make techniques that tted this imposed constraint. Our contribution is ac...

  2. Creativity and the Curriculum. Inaugural Professorial Lecture

    Science.gov (United States)

    Wyse, Dominic

    2014-01-01

    Creativity is regarded by many as a vital aspect of the human world, and creative endeavours are seen as a central element of society. Hence student creativity is regarded as a desirable outcome of education. This inaugural professorial lecture examines the place of creativity in education and in national curricula. Beginning with examples of…

  3. Movement and Character. Lecture, London, 1946

    Science.gov (United States)

    Montesorri, Maria

    2013-01-01

    Dr. Montessori's words from the 1946 London Lectures describe principles of intelligence and character, the work of the hand, and movement with a purpose as being integral to self-construction. The perfection of movement is spiritual, says Dr. Montessori. Repetition of practical life exercises are exercises in movement with the dignity of human…

  4. Lecturers' Views on Ghana's Undergraduate Mathematics Education

    Science.gov (United States)

    Assuah, Charles; Ayebo, Abraham

    2015-01-01

    This paper synthesizes the views of 6 university lecturers on Ghana's undergraduate mathematics education. These views were expressed during a mathematics workshop sensitization program on the "contribution of undergraduate mathematics education to the Ghanaian economy." The data consisting of open-ended questions followed by…

  5. Lecturers, students and community members sharing the ...

    African Journals Online (AJOL)

    Lecturers, students and community members sharing the responsibility of assessing project-based poster presentations. ... Active participation in the process of learning rather than transmission of information is prominent in modern higher education contexts. In alignment with this trend, traditional modes of assessment, ...

  6. Lectures on quantization of gauge systems

    NARCIS (Netherlands)

    Reshetikhin, N.; Booß-Bavnbek, B.; Esposito, G.; Lesch, M.

    2010-01-01

    A gauge system is a classical field theory where among the fields there are connections in a principal G-bundle over the space - time manifold and the classical action is either invariant or transforms appropriately with respect to the action of the gauge group. The lectures are focused on the path

  7. Public Lectures | Events | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Public and special lectures in Mid-Year and Annual Meetings ... Pulse to planet: Human health in the era of sustainable development. K. Srinath Reddy Pune, 7 November 2015 (81st Annual Meeting) .... Challenges in space exploration: Global perspectives and Indian Initiatives G. Madhavan Nair Bengaluru, 13 July 2007 ...

  8. Perceptions of Engineering students, lecturers and academic ...

    African Journals Online (AJOL)

    Participants included five lecturers from the Engineering faculty and four academic development practitioners, who were all purposefully selected. The sample consisted of men and women who were interviewed individually. Interviews were also conducted with ten first-year Engineering students and ten second-year ...

  9. Music during Lectures: Will Students Learn Better?

    Science.gov (United States)

    Dosseville, Fabrice; Laborde, Sylvain; Scelles, Nicolas

    2012-01-01

    We investigated the influence of music during learning on the academic performance of undergraduate students, and more particularly the influence of affects induced by music. Altogether 249 students were involved in the study, divided into a control group and an experimental group. Both groups attended the same videotaped lecture, with the…

  10. Academic Training: Summer Student Lecture Programme

    CERN Multimedia

    2004-01-01

    Main Auditorium, bldg. 500 DATE TIME LECTURER TITLE Monday 19 July 09:15 - 10:00 A. PICH (IFIC) The Standard Model (1/8) 10:15 - 11:00 O. ULLALAND (CERN) Detectors (2/5) 11:15 - 12:00 O. ULLALAND (CERN) Detectors (3/5) DATE TIME LECTURER TITLE Tuesday 20 July 09:15 - 10:00 A. PICH (IFIC) The Standard Model (2/8) 10:15 - 11:00 O. ULLALAND (CERN) Detectors (4/5) 11:15 - 12:00 O. ULLALAND (CERN) A. PICH (IFIC) Discussion Session DATE TIME LECTURER TITLE Wednesday 21 July 09:15 - 10:00 A. PICH (IFIC) The Standard Model (3/8) 10:15 - 11:00 A. PICH (IFIC) The Standard Model (4/8) 11:15 - 12:00 O. ULLALAND (CERN) Detectors (5/5) 14:00 - 15:00 R. BRUN (CERN) ROOT: Introduction and Demonstration DATE TIME LECTURER TITLE Thursday 22 July 09:15 - 10:00 A. PICH (IFIC) The Standard Model (5/8) 10:15 - 11:00 C. De La Taille (Laboratoire de l'Accélérateur Linéaire) Introduction to Electronics (1/3) 11:15 - 12:00 A. PICH (IFIC) C. De La Taille (Laboratoi...

  11. Academic Training: Summer Student Lecture Programme

    CERN Multimedia

    2004-01-01

    Main Auditorium, bldg. 500 DATE TIME LECTURER TITLE Monday 26 July 09:15 - 10:00 A. Pich (IFIC) The Standard Model (7/8) 10:15 - 11:00 R. Rattazzi (CERN) Beyond the Standard Model (1/3) 11:15 - 12:00 K. Jacobs (Universität Freiburg) Physics in Hadronic Colliders (1/4) DATE TIME LECTURER TITLE Tuesday 27 July 09:15 - 10:00 A. Pich (IFIC) The Standard Model (8/8) 10:15 - 11:00 R. Rattazzi (CERN) Beyond the Standard Model (2/3) 11:15 - 12:00 R. Rattazzi (CERN) A. Pich (IFIC) Discussion Session DATE TIME LECTURER TITLE Wednesday 28 July 09:15 - 10:00 K. Jacobs (Universität Freiburg) Physics in Hadronic Colliders (2/4) 10:15 - 11:00 K. Jacobs (Universität Freiburg) Physics in Hadronic Colliders (3/4) 11:15 - 12:00 R. Rattazzi (CERN) Beyond the Standard Model (3/3) 14:00 - 15:00 R. Assmann (CERN) The CLIC project DATE TIME LECTURER TITLE Thursday 29 July 09:15 - 10:00 K. Jacobs (Universität Freiburg) Physics in Hadronic ...

  12. Lecturing style teaching and student performance

    NARCIS (Netherlands)

    Van Klaveren, Chris

    Teachers in the Netherlands tend to spend less time in front of the class, and often adopt a more personal approach. This allows them to better adjust their lecturing style to the needs of the individual student with the aim of increasing student performance. However, a more personal approach is

  13. Introductory lectures on quantum field theory

    International Nuclear Information System (INIS)

    Alvarez-Gaume, L.; Vasquez-Mozo, M.A.

    2011-01-01

    In these lectures we present a few topics in quantum field theory in detail. Some of them are conceptual and some more practical. They have been selected because they appear frequently in current applications to particle physics and string theory. (author)

  14. Facilitating lecturer development and student learning through ...

    African Journals Online (AJOL)

    The aim of the action research project is to improve my own practice as research methodology lecturer to facilitate effective student learning to enable students to become reflective practitioners with responsibility for their own professional development through action research in their own classrooms, and to motivate the ...

  15. The Refined Lecture Hall Theorem via Abacus Diagrams

    OpenAIRE

    Bradford, Laura; Harris, Meredith; Jones, Brant; Komarinski, Alex; Matson, Carly; O'Shea, Edwin

    2012-01-01

    Bousquet-M\\'elou & Eriksson's lecture hall theorem generalizes Euler's celebrated distinct-odd partition theorem. We present an elementary and transparent proof of a refined version of the lecture hall theorem using a simple bijection involving abacus diagrams.

  16. Lecture note on circuit technology for high energy physics experiment

    International Nuclear Information System (INIS)

    Ikeda, Hirokazu.

    1992-07-01

    This lecture gives basic ideas and practice of the circuit technology for high energy physics experiment. The program of this lecture gives access to the integrated circuit technology to be applied for a high luminosity hadron collider experiment. (author)

  17. Experiences of using an interactive audience response system in lectures

    Directory of Open Access Journals (Sweden)

    Renko Marjo

    2003-12-01

    Full Text Available Abstract Background Lectures are good for presenting information and providing explanations, but because they lack active participation they have been neglected. Methods Students' experiences were evaluated after exposing them to the use of voting during lectures in their paediatrics course. Questions were delivered to the students taking paediatrics course. Thirty-six students out of the total of 40 (90% attended the opening lecture, at which the first survey concerning previous experiences of lectures was performed. Thirty-nine students (98% answered the second series of questions at the end of the paediatrics course. Results Most of the students felt that voting improved their activity during lectures, enhanced their learning, and that it was easier to make questions during lectures than earlier. Conclusions The students gained new, exciting insights much more often during the paediatrics course than before. We as teachers found that voting during lectures could easily overcome some of the obstacles of good lecturing.

  18. Software approach to minimizing problems of student-lecturer ...

    African Journals Online (AJOL)

    Lecturer Interaction in Higher institutions of learning. The Software was developed using PHP and hosted in the University web server, and the interaction between students and their lecturers was compared using both the traditional approaches ...

  19. Function of site. Chapter 2

    International Nuclear Information System (INIS)

    1999-01-01

    In Semipalatinsk test site's history there are two stages for nuclear tests. In first stage (1949-1962) when the nuclear tests have being conducted in atmosphere, and second one (1963-1989) when underground nuclear explosions have being carried out. There were 456 nuclear tests, from which 117 were both the surface and the atmospheric explosions and other underground ones. In the chapter general characteristics of atmospheric nuclear tests, conducted on Semipalatinsk test site in 1949-1962 (chronology of conducting, release energy and kinds of nuclear explosions) are presented in tabular form. Most powerful of explosion was test of hydro- nuclear (hydrogen) bomb - prototype of thermonuclear charge in 1955 with capacity 1.6 Mt. In 1990-1992 the target-oriented radioecological investigation of territory around Semipalatinsk test site was carried out. Specialists dividing all atmospheric explosions by rate local traces, forming out of test site into 4 groups: with very strong contamination, with strong contamination, with weak contamination, and with very weak contamination. To nuclear explosions with very strong contamination were attributed the four explosions carrying out in 29.08.1949, 24.09.1951, 12.08.1953, 24.08.1956. Estimations of radiological situation including external doses of radiation and environment contamination and content of radioactive substances in human body was given by 10 European experts in collaboration with Kazakstan scientists. Results of investigation show that during past period surface contamination, called by nuclear weapons' fissile products was subjected to considerable decay. External doses completely coincidence with natural background. Remains of long living radionuclides are insignificant as well, and in 1995 its approximately were equal to annual exposition doses. One of most damaged settlements is Chagan. On it territory 530 radioactive sources with doses capacity from 100 up to 400 μR/h. Scientists of Semipalatinsk defined

  20. Study on the formation of cubic texture in Ni-7 at.% W alloy substrates by powder metallurgy routes

    DEFF Research Database (Denmark)

    Zhao, Yue; Suo, HongLi; Zhu, YongHua

    2009-01-01

    One of the main challenges for coated conductor applications is to produce sharp cubic textured alloy substrates with high strength and low magnetism. In this work, the cubic textured Ni–7 at.% W substrates were prepared from different powder metallurgy ingots by rolling-assisted biaxially textured...... substrate processing. The fabrication processes of cubic texture in the Ni–7 at.% W tapes by two powder metallurgy routes are described in detail. Through the optimized process, full width at half maximum values of 6.7° and 5.0° were obtained, as estimated by X-ray (1 1 1) phi scan and (2 0 0) rocking curve...

  1. Student Use of Mobile Devices in University Lectures

    Science.gov (United States)

    Roberts, Neil; Rees, Michael

    2014-01-01

    Mobile devices are increasingly used by students in university lectures. This has resulted in controversy and the banning of mobile devices in some lectures. Although there has been some research into how students use laptop computers in lectures, there has been little investigation into the wider use of mobile devices. This study was designed to…

  2. Engagement of Students with Lectures in Biochemistry and Pharmacology

    Science.gov (United States)

    Davis, Elizabeth Ann; Hodgson, Yvonne; Macaulay, Janet Olwyn

    2012-01-01

    Academic staff at universities have become concerned about the decrease in student attendance at lectures and the implication of this on student achievement and learning. Few studies have measured actual lecture attendance in a coherent or comprehensive way. The aim of this study was to measure actual lecture attendance of students over two year…

  3. Taxonomy of Lecture Note-Taking Skills and Subskills

    Science.gov (United States)

    Al-Musalli, Alaa M.

    2015-01-01

    Note taking (NT) in lectures is as active a skill as listening, which stimulates it, and as challenging as writing, which is the end product. Literature on lecture NT misses an integration of the processes involved in listening with those in NT. In this article, a taxonomy is proposed of lecture NT skills and subskills based on a similar list…

  4. The Lecture as a Transmedial Pedagogical Form: A Historical Analysis

    Science.gov (United States)

    Friesen, Norm

    2011-01-01

    The lecture has been much maligned as a pedagogical form, yet it persists and even flourishes today in the form of the podcast, the TED talk, and the "smart" lecture hall. This article examines the lecture as a pedagogical genre, as "a site where differences between media are negotiated" (Franzel) as these media coevolve. This examination shows…

  5. Lecturers' Experience of Using Social Media in Higher Education Courses

    Science.gov (United States)

    Seechaliao, Thapanee

    2015-01-01

    This research paper presents lecturers' experience of using social media in higher education courses. The research methodology used a survey approach. The research instrument was a questionnaire about lecturers' experience of using social media in higher education courses. Thirty-one lecturers completed the questionnaire. The data were scored by…

  6. 45 CFR 73.735-706 - Teaching, lecturing, and speechmaking.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Teaching, lecturing, and speechmaking. 73.735-706... OF CONDUCT Outside Activities § 73.735-706 Teaching, lecturing, and speechmaking. (a) Employees are encouraged to engage in teaching and lecturing activities which are not part of their official duties when...

  7. The synthesis and characterization of Mg-Zn-Ca alloy by powder metallurgy process

    Energy Technology Data Exchange (ETDEWEB)

    Annur, Dhyah; Franciska, P.L.; Erryani, Aprilia; Amal, M. Ikhlasul; Kartika, Ika, E-mail: pepeng2000@yahoo.com [Research center for Metallurgy and Material, Indonesian Institute of Science (Indonesia); Sitorus, Lyandra S. [Sultan Ageng Tirtayasa University (Indonesia)

    2016-04-19

    Known for its biodegradation and biocompatible properties, magnesium alloys have gained many interests to be researched as implant material. In this study, Mg-3Zn-1Ca, Mg-29Zn-1Ca, and Mg-53Zn-4.3Ca (in wt%) were synthesized by means of powder metallurgy method. The compression strength and corrosion resistance of magnesium alloy were thoroughly examined. The microstructures of the alloy were characterized using optical microscopy, Scanning Electron Microscope, and also X-ray diffraction analysis. The corrosion resistance were evaluated using electrochemical analysis. The result indicated that Mg- Zn- Ca alloy could be synthesized using powder metallurgy method. This study showed that Mg-29Zn-1Ca would make the highest mechanical strength up to 159.81 MPa. Strengthening mechanism can be explained by precipitation hardening and grain refinement mechanism. Phase analysis had shown the formation of α Mg, MgO, and intermetallic phases: Mg2Zn11 and also Ca2Mg6Zn3. However, when the composition of Zn reach 53% weight, the mechanical strength will be decreasing. In addition, all of Mg-Zn-Ca alloy studied here had better corrosion resistance (Ecorr around -1.4 VSCE) than previous study of Mg. This study indicated that Mg- 29Zn- 1Ca alloy can be further analyzed to be a biodegradable implant material.

  8. Development of processes for zircaloy chips recycling by electric arc furnace remelting and powder metallurgy

    International Nuclear Information System (INIS)

    Pereira, Luiz Alberto Tavares

    2014-01-01

    PWR reactors employ, as nuclear fuel, UO 2 pellets with Zircaloy clad. In the fabrication of fuel element parts, machining chips from the alloys are generated. As the Zircaloy chips cannot be discarded as ordinary metallic waste, the recycling of this material is important for the Brazilian Nuclear Policy, which targets the reprocess of Zircaloy residues for economic and environmental aspects. This work presents two methods developed in order to recycle Zircaloy chips. In one of the methods, Zircaloy machining chips were refused using an electric-arc furnace to obtain small laboratory ingots. The second one uses powder metallurgy techniques, where the chips were submitted to hydriding process and the resulting material was milled, isostatically pressed and vacuum sintered. The ingots were heat-treated by vacuum annealing. The microstructures resulting from both processing methods were characterized using optical and scanning electron microscopy. Chemical composition, crystal phases and hardness were also determined. The results showed that the composition of recycled Zircaloy comply with the chemical specifications and presented adequate microstructure for nuclear use. The good results of the powder metallurgy method suggest the possibility of producing small parts, like cladding end-caps, using near net shape sintering. (author)

  9. Microstructural and electrical investigation of Cu-Ni-Cr alloys obtained by powder metallurgy method

    Energy Technology Data Exchange (ETDEWEB)

    Carrio, Juan A.G.; Carvalhal, M.A.; Ayabe, L.M.; Monteiro, W.A., E-mail: jgcarrio@mackenzie.br [Universidade Presbiteriana Mackenzie (UPM/CCH), Sao Paulo, SP (Brazil). Centro de Ciencias e Humanidades. Dept. de Fisica; Silva, L.C.E. da; Silva Junior, R.V., E-mail: fisica.cch@mackenzie.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    The aim of this work, using the powder metallurgy process, is to synthesize metallic alloys with high mechanical strength and high electric conductivity, after melting optimizing and thermal treatments. The Cu-Ni-Cr (wt%) alloys are characterized in their mechanical and electrical properties as well as the obtained microstructure. Through the process of powder metallurgy, contacts and structural parts can be obtained. The alloys elements are added to copper with the intention to improve their strength, ductility and thermal stability, without causing considerable damages in their form, electrical and thermal conductivity, and corrosion resistance. The metallic powders were mixed for a suitable time and then they were pressed in a cold uniaxial pressing (1000 kPa). Afterwards, the specimens were sintered in temperatures varying from 700 up to 800 deg C under vacuum. At last, the samples were homogenized at 550 deg C under vacuum, for special times. The comparative analysis is based on the sintered density, densification parameter, hardness, macrostructures and microstructures of the samples. The alloys were characterized by optical microscopy, X-rays powder diffraction, electrical conductivity and Vickers hardness. (author)

  10. Summary of NRC LWR safety research programs on fuel behavior, metallurgy/materials and operational safety

    International Nuclear Information System (INIS)

    Bennett, G.L.

    1979-09-01

    The NRC light-water reactor safety-research program is part of the NRC regulatory program for ensuring the safety of nuclear power plants. This paper summarizes the results of NRC-sponsored research into fuel behavior, metallurgy and materials, and operational safety. The fuel behavior research program provides a detailed understanding of the response of nuclear fuel assemblies to postulated off-normal or accident conditions. Fuel behavior research includes studies of basic fuel rod properties, in-reactor tests, computer code development, fission product release and fuel meltdown. The metallurgy and materials research program provides independent confirmation of the safe design of reactor vessels and piping. This program includes studies on fracture mechanics, irradiation embrittlement, stress corrosion, crack growth, and nondestructive examination. The operational safety research provides direct assistance to NRC officials concerned with the operational and operational-safety aspects of nuclear power plants. The topics currently being addressed include qualification testing evaluation, fire protection, human factors, and noise diagnostics

  11. Acoustic harmonic generation measurement applications: Detection of tight cracks in powder metallurgy compacts

    International Nuclear Information System (INIS)

    Barnard, D.J.; Foley, J.C.

    2000-01-01

    Standard linear ultrasonic testing techniques have long been employed for locating and characterizing relatively open cracks in a wide variety of materials, from metallic alloys and ceramics to composites. In all these materials, the detection of open cracks easily accomplished because the void between the two crack surfaces provides sufficient acoustic impedance mismatch to reflect the incident energy. Closed or partially closed cracks, however, may often go undetected because contacting interfaces allow transmission of ultrasound. In the green (unsintered) state, powder metallurgy compacts typically contain high residual stresses that have the ability to close cracks formed during the compaction process, a result of oxide films, improper powder lubricant, mold design, etc. After sintering, the reduction of residual stresses may no longer be sufficient to close the crack. Although the crack may be more easily detected, it is obvious most desirable to discover defects prior to sintering. It has been shown that the displacements of an interface may be highly nonlinear if a stress wave of sufficient intensity propagates across it, a result of the stress wave either opening or closing the interface. Current efforts involve the application of nonlinear acoustic techniques, in particular acoustic harmonic generation measurements, for the detection and characterization of tightly closed cracks in powder metallurgy parts. A description of the equipment and the measurement technique will be discussed and initial experimental results on sintered and green compacts will be presented. - This work was performed at the Ames Laboratory, Iowa State University under USDOE Contract No. W-7405-ENG-82

  12. Characterization of aluminum/steel components from recycled swarf using the powder metallurgy as technique

    International Nuclear Information System (INIS)

    Souza, V.E.S.; Masieiro, F.R.S.; Lourenco, J.M.; Felipe, R.C.T.S.

    2009-01-01

    Full text: The powder metallurgy process consists to produce metallic or ceramic components through pressure in a powder mass. These components will be submitted to a sintering temperature in order to consolidate them and then improve their mechanical proprieties. The industry is responsible for the swarf generation from different manufacture process. This paper has main goal the reutilization of aluminum and steel swarf using the powder metallurgy as technique. The methodology used in this work consists to compact Al 6060 plus steel SAE 1045 as reinforce material at 250MPa, 400MPa and 600MPa. The composition about these compacted will be 30%, 40%, 50% of steel into aluminum matrix. In this way will be analyze the hardness as function of the compressibility and quantity of steel. The samples will be processed at 500°C during 45 minutes using a resistive furnace in a hydrogen atmosphere. Micrographs of the sintered samples will be obtained by using a Scanning Electron Microscope and Optic Microscope. X-rays diffraction will be also used to characterize the phases found to due diffusivity between the steel and aluminum. (author)

  13. Development of an extra-high strength powder metallurgy nickel-base superalloy

    Science.gov (United States)

    Kent, W. B.

    1977-01-01

    A program was conducted to optimize the composition of NASA IIb-11, an alloy originally developed as a wrought material, for thermal stability and to determine the feasibility for producing the alloy using powder metallurgy techniques. Seven compositions were melted and atomized, hot isostatically pressed, cross rolled to disks and heat treated. Tensile and stress rupture properties from room temperature to 870 C (1600 F) were determined in addition to thermal stability characteristics. Processing variables included hot isostatic pressing parameters and handling, cross rolling procedures and heat treatment cycles. NASA IIb-11E displayed the best combination of overall properties for service as a 760 C (1400 F) disk material. Its composition is 0.06 C, 8.5 Cr, 9.0 Co, 2.0 Mo, 7.1 W, 6.6 Ta, 4.5 Al, 0.75 Ti, 0.5 V, 0.7 Hf, 0.01 B, 0.05 Zr and balance Ni. While the alloy exhibits the highest 760 C (1400 F) rupture strength reported for any powder metallurgy disk alloy to date, additional studies to further evaluate the effects of heat treatment may be required. The alloy is not susceptible to topologically close-packed phase formation during thermal exposure at 870 C (1600 F) for 1,500 hours, but its mechanical property levels are lowered due to grain boundary carbide formation.

  14. Analysis of cancer mortality risk among workers of a research uranium metallurgy division in France

    International Nuclear Information System (INIS)

    Jejati, H.; Laurier, D.; Tirmarche, M.; Giraud, J.M.

    1997-01-01

    This cohort study has been undertaken in response to a suspected cluster of cancers mentioned by workers involved in research activities concerning the metallurgy of uranium. The studied population included all persons having worked between 1950 and 1968 at the Metallurgy Division of the French Atomic Energy Commission (CEA). Exposures were registered on an individual annual basis. For analysis, they were grouped in three categories: use of chemicals agents (Benzene, beryllium, alcohols, solvents ...), manipulation of radioactive materials (uranium, thorium, fission decay products), and exposure to external radiation. This relatively small cohort included 356 workers followed up to December 1990. Out of observed deaths, 21 were from cancer. Total mortality from cancer was less than expected from national rates (Standardised Mortality Ratio = 0.73). Cancer mortality did not increase with duration of exposure to external radiation or with duration of manipulation of radioactive materials. Risk of cancer was increasing with the number of years of exposure to chemicals. The small size of this cohort limits the conclusion of the observed results. The purpose, despite this lack of power, was to answer a worry of the workers, more than to estimate a clear dose-response relationship linked to a specific cancer site. The effect studied here is ''all cancers'', a distinction of the different sites being uninformative because of the very small number of cases observed. Nevertheless, this study suggests some routes for further research: it highlights the importance of considering concomitant exposures like chemical ones in studies of nuclear workers. (author)

  15. Metallurgy of high-silicon steel parts produced using Selective Laser Melting

    International Nuclear Information System (INIS)

    Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco; Hague, Richard

    2016-01-01

    The metallurgy of high-silicon steel (6.9%wt.Si) processed using Selective Laser Melting (SLM) is presented for the first time in this study. High-silicon steel has great potential as a soft magnetic alloy, but its employment has been limited due to its poor workability. The effect of SLM-processing on the metallurgy of the alloy is investigated in this work using microscopy, X-Ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD). XRD analysis suggests that the SLM high-silicon steel is a single ferritic phase (solid solution), with no sign of phase ordering. This is expected to have beneficial effects on the material properties, since ordering has been shown to make silicon steels more brittle and electrically conductive. For near-fully dense samples, columnar grains with a high aspect ratio and oriented along the build direction are found. Most importantly, a <001> fibre-texture along the build direction can be changed into a cube-texture when the qualitative shape of the melt-pool is altered (from shallow to deep) by increasing the energy input of the scanning laser. This feature could potentially open the path to the manufacture of three-dimensional grain-oriented high-silicon steels for electromechanical applications.

  16. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique.

    Science.gov (United States)

    Ryan, Garrett E; Pandit, Abhay S; Apatsidis, Dimitrios P

    2008-09-01

    One of the main issues in orthopaedic implant design is the fabrication of scaffolds that closely mimic the biomechanical properties of the surrounding bone. This research reports on a multi-stage rapid prototyping technique that was successfully developed to produce porous titanium scaffolds with fully interconnected pore networks and reproducible porosity and pore size. The scaffolds' porous characteristics were governed by a sacrificial wax template, fabricated using a commercial 3D-printer. Powder metallurgy processes were employed to generate the titanium scaffolds by filling around the wax template with titanium slurry. In the attempt to optimise the powder metallurgy technique, variations in slurry concentration, compaction pressure and sintering temperature were investigated. By altering the wax design template, pore sizes ranging from 200 to 400 microm were achieved. Scaffolds with porosities of 66.8 +/- 3.6% revealed compression strengths of 104.4+/-22.5 MPa in the axial direction and 23.5 +/- 9.6 MPa in the transverse direction demonstrating their anisotropic nature. Scaffold topography was characterised using scanning electron microscopy and microcomputed tomography. Three-dimensional reconstruction enabled the main architectural parameters such as pore size, interconnecting porosity, level of anisotropy and level of structural disorder to be determined. The titanium scaffolds were compared to their intended designs, as governed by their sacrificial wax templates. Although discrepancies in architectural parameters existed between the intended and the actual scaffolds, overall the results indicate that the porous titanium scaffolds have the properties to be potentially employed in orthopaedic applications.

  17. Environmental legacy of copper metallurgy and Mongol silver smelting recorded in Yunnan Lake sediments.

    Science.gov (United States)

    Hillman, Aubrey L; Abbott, Mark B; Yu, JunQing; Bain, Daniel J; Chiou-Peng, TzeHuey

    2015-03-17

    Geochemical measurements on well-dated sediment cores from Lake Er (Erhai) are used to determine the timing of changes in metal concentrations over 4500 years in Yunnan, a borderland region in southwestern China noted for rich mineral deposits but with inadequately documented metallurgical history. Our findings add new insight into the impacts and environmental legacy of human exploitation of metal resources in Yunnan history. We observe an increase in copper at 1500 BC resulting from atmospheric emissions associated with metallurgy. These data clarify the chronological issues related to links between the onset of Yunnan metallurgy and the advent of bronze technology in adjacent Southeast Asia, subjects that have been debated for nearly half a century. We also observe an increase from 1100 to 1300 AD in a number of heavy metals including lead, silver, zinc, and cadmium from atmospheric emissions associated with silver smelting. Culminating during the rule of the Mongols, known as the Yuan Dynasty (1271-1368 AD), these metal concentrations approach levels three to four times higher than those from industrialized mining activity occurring within the catchment today. Notably, the concentrations of lead approach levels at which harmful effects may be observed in aquatic organisms. The persistence of this lead pollution over time created an environmental legacy that likely contributes to known issues in modern day sediment quality. We demonstrate that historic metallurgical production in Yunnan can cause substantial impacts on the sediment quality of lake systems, similar to other paleolimnological findings around the globe.

  18. Microstructural and mechanical characteristics of porous iron prepared by powder metallurgy.

    Science.gov (United States)

    Capek, Jaroslav; Vojtěch, Dalibor

    2014-10-01

    The demand for porous biodegradable load-bearing implants has been increasing recently. Based on investigations of biodegradable stents, porous iron may be a suitable material for such applications. In this study, we prepared porous iron samples with porosities of 34-51 vol.% by powder metallurgy using ammonium bicarbonate as a space-holder material. We studied sample microstructure (SEM-EDX and XRD), flexural and compressive behaviors (universal loading machine) and hardness HV5 (hardness tester) of the prepared samples. Sample porosity increased with the amount of spacer in the initial mixtures. Only the pore surfaces had insignificant oxidation and no other contamination was observed. Increasing porosity decreased the mechanical properties of the samples; although, the properties were still comparable with human bone and higher than those of porous non-metallic biomaterials and porous magnesium prepared in a similar way. Based on these results, powder metallurgy appears to be a suitable method for the preparation of porous iron for orthopedic applications. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Fractionation study in bioleached metallurgy wastes using six-step sequential extraction.

    Science.gov (United States)

    Krasnodebska-Ostrega, Beata; Pałdyna, Joanna; Kowalska, Joanna; Jedynak, Łukasz; Golimowski, Jerzy

    2009-08-15

    The stored metallurgy wastes contain residues from ore processing operations that are characterized by relatively high concentrations of heavy metals. The bioleaching process makes use of bacteria to recover elements from industrial wastes and to decrease potential risk of environmental contamination. Wastes were treated by solutions containing bacteria. In this work, the optimized six-stage sequential extraction procedure was applied for the fractionation of Ni, Cr, Fe, Mn, Cu and Zn in iron-nickel metallurgy wastes deposited in Southern Poland (Szklary). Fractionation and total concentrations of elements in wastes before and after various bioleaching treatments were studied. Analyses of the extracts were performed by ICP-MS and FAAS. To achieve the most effective bioleaching of Zn, Cr, Ni, Cu, Mn, Fe the usage of both autotrophic and heterotrophic bacteria in sequence, combined with flushing of the residue after bioleaching is required. 80-100% of total metal concentrations were mobilized after the proposed treatment. Wastes treated according to this procedure could be deposited without any risk of environmental contamination and additionally the metals could be recovered for industrial purposes.

  20. Fire effects on prehistoric ceramics [Chapter 3

    Science.gov (United States)

    Trisha Rude; Anne Trinkle Jones

    2012-01-01

    In North America, prehistoric pottery is primarily earthenware (a porous ceramic, fired at a relatively low temperature). It is not glass-like or dense like other kinds of pottery such as stoneware and porcelain (see chapter 6).

  1. The reinvigorated South African GRSS Chapter

    CSIR Research Space (South Africa)

    Schwegmann, Colin P

    2017-09-01

    Full Text Available Looking ahead, the South African GRSS Chapter is investigating the possibility of organizing a meeting with local GRSS members, universities, and other remote-sensing organizations with the purpose of engaging undergraduate and early postgraduate...

  2. Chapter 42. Waterborne and Foodborne Parasites

    Science.gov (United States)

    This chapter identifies the most prominent parasites in North America that are acquired through contaminated food and water including protozoa (Acanthamoeba, Naegleria, Entamoeba, Giardia, Cryptosporidium, Cystoisospora, Cyclospora, Toxoplasma, and Balantidium), nematodes (Trichinella, Angiostrongyl...

  3. The Innovation in Libraries Awesome Foundation Chapter

    Directory of Open Access Journals (Sweden)

    Joshua Finnell

    2017-05-01

    Full Text Available In Brief: This article discusses the creation, philosophy, and future directions of the Innovation in Libraries Awesome Foundation Chapter, a grassroots crowdfunding initiative incubated within Library Pipeline.

  4. Chapter 5: Summary of model application

    International Nuclear Information System (INIS)

    1995-01-01

    This chapter provides a brief summary of the model applications described in Volume III of the Final Report. This chapter dealt with the selected water management regimes; ground water flow regimes; agriculture; ground water quality; hydrodynamics, sediment transport and water quality in the Danube; hydrodynamics, sediment transport and water quality in the river branch system; hydrodynamics, sediment transport and water quality in the Hrusov reservoir and with ecology in this Danube area

  5. Lecture Notes on Topics in Accelerator Physics

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Alex W.

    2002-11-15

    These are lecture notes that cover a selection of topics, some of them under current research, in accelerator physics. I try to derive the results from first principles, although the students are assumed to have an introductory knowledge of the basics. The topics covered are: (1) Panofsky-Wenzel and Planar Wake Theorems; (2) Echo Effect; (3) Crystalline Beam; (4) Fast Ion Instability; (5) Lawson-Woodward Theorem and Laser Acceleration in Free Space; (6) Spin Dynamics and Siberian Snakes; (7) Symplectic Approximation of Maps; (8) Truncated Power Series Algebra; and (9) Lie Algebra Technique for nonlinear Dynamics. The purpose of these lectures is not to elaborate, but to prepare the students so that they can do their own research. Each topic can be read independently of the others.

  6. Lectures on Flavor Physics and CP Violation

    CERN Document Server

    Grinstein, Benjamín

    2016-12-20

    These lectures on flavor physics are an introduction to the subject. First lec- ture: We discuss the meaning of flavor and the importance of flavor physics in restricting extensions of the Standard Model (SM) of Electroweak interactions. We explain the origin of the KM matrix and how its elements are determined. We discuss FCNC and the GIM mechanism, followed by how a principle of Minimal Flavor Violation leads to SM extensions that are safe as far as FCNC are concerned even if the new physics comes in at low, TeVish scales. This is illustrated by the example of B radiative decays ( b → sγ ). Second lecture: We then turn our attention to CP-violation. We start by presenting neutral meson mixing. Then we consider various CP-asymmetries, culminating in the theoretically clean interference between mixing and decay into CP eigenstates.

  7. Academic Training: Academic Training Lectures-Questionnaire

    CERN Multimedia

    2004-01-01

    ACADEMIC TRAINING Françoise Benz tel. 73127 academic.training@cern.ch SUGGEST AND WIN! Its time to plan the 2004-2005 lecture series. From today until March 19 you have the chance to give your contribution to planning for next year's Academic Training Lecture Series. At the web site: http://cern.ch/Academic.Training/questionnaire you will find questionnaires proposing topics in high energy physics, applied physics and science and society. Answering the questionnaire will help ensure that the selected topics are as close as possible to your interests. In particular requests and comments from students will be much appreciated. To encourage your contribution, the AT Committee will reward one lucky winner with a small prize, a 50 CHF coupon for a book purchase at the CERN bookshop.

  8. Academic Training Lecture Regular Programme: Cloud Computing

    CERN Multimedia

    2012-01-01

    Cloud Computing (1/2), by Belmiro Rodrigues Moreira (LIP Laboratorio de Instrumentacao e Fisica Experimental de Part).   Wednesday, May 30, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 500-1-001 - Main Auditorium ) Cloud computing, the recent years buzzword for distributed computing, continues to attract and keep the interest of both the computing and business world. These lectures aim at explaining "What is Cloud Computing?" identifying and analyzing it's characteristics, models, and applications. The lectures will explore different "Cloud definitions" given by different authors and use them to introduce the particular concepts. The main cloud models (SaaS, PaaS, IaaS), cloud types (public, private, hybrid), cloud standards and security concerns will be presented. The borders between Cloud Computing and Grid Computing, Server Virtualization, Utility Computing will be discussed and analyzed.

  9. 106-17 Telemetry Management Resources Chapter 25

    Science.gov (United States)

    2017-07-01

    capable of generating event -based notifications. Management resources regarding general notifications are contained within the...Telemetry Standards, RCC Standard 106-17 Chapter 25, July 2017 i CHAPTER 25 Management Resources Acronyms...iii Chapter 25. Management Resources

  10. Three lectures on topological phases of matter

    Science.gov (United States)

    Witten, E.

    2016-07-01

    These notes are based on lectures at the PSSCMP/PiTP summer school that was held at Princeton University and the Institute for Advanced Study in July, 2015. They are devoted largely to topological phases of matter that can be understood in terms of free fermions and band theory. They also contain an introduction to the fractional quantum Hall effect from the point of view of effective field theory.

  11. Lectures on magnetism and neutron scattering

    International Nuclear Information System (INIS)

    Gunn, J.M.F.

    1983-12-01

    The paper contains six lectures given to the Neutron Division of the Rutherford Appleton laboratory in 1983. The aim was to explain fundamental physics of neutron scattering and basic magnetism to the non-specialist scientist. The text includes: origin of neutron's magnetic moment and spin-dependent interactions with electrons and nuclei, why are solids magnetic, magnetic anistropy and domain structure, phenomenological spin waves, magnetic phase transitions and electronic excitations in magnets. (U.K.)

  12. Lectures on interacting string field theory

    International Nuclear Information System (INIS)

    Jevicki, A.

    1986-09-01

    We give a detailed review of the current formulations of interacting string field theory. The historical development of the subject is taken beginning with the old dual resonance model theory. The light cone approach is reviewed in some detail with emphasis on conformal mapping techniques. Witten's covariant approach is presented. The main body of the lectures concentrates on developing the operator formulation of Witten's theory. 38 refs., 22 figs., 5 tabs

  13. Collection of lectures delivered at decontamination course

    International Nuclear Information System (INIS)

    1986-01-01

    The collection contains 10 lectures read at the decontamination workshop DEK '85 held between 29-31 Oct 1985 at the Nuclear Research Institute at Rez, all of which fall under the INIS Subject Scope. The workshop, whose first course was held in 1975, is destined for personnel of various institutions who are decontamination process users but also for designers of nuclear installations, personnel of safety of work inspectorates, hygiene services, etc. (Z.M.)

  14. Lectures on neutron scattering techniques: 1

    International Nuclear Information System (INIS)

    Carlile, C.J.

    1988-08-01

    The lecture on the production of neutrons was presented at a Summer School on neutron scattering, Rome, 1986. A description is given of the production of neutrons by natural radioactive sources, fission, and particle accelerator sources. Modern neutron sources with high intensities are discussed including the ISIS pulsed neutron source at the Rutherford Appleton Laboratory and the High Flux Reactor at the Institut Laue Langevin. (U.K.)

  15. DIGAREC Keynote-Lectures 2009/10

    OpenAIRE

    Aarseth, Espen; Manovich, Lev; Mäyrä, Frans; Salen, Katie; Wolf, Mark J. P.

    2011-01-01

    The sixth volume of the DIGAREC Series holds the contributions to the DIGAREC Keynote-Lectures given at the University of Potsdam in the winter semester 2009/10. With contributions by Mark J.P. Wolf (Concordia University Wisconsin), Espen Aarseth (Center for Computer Games Research, IT University of Copenhagen), Katie Salen (Parsons New School of Design, New York), Laura Ermi and Frans Mäyrä (University of Tampere), and Lev Manovich (University of Southern California, San Diego).

  16. Lecture programme The reality of science today

    CERN Multimedia

    2007-01-01

    What are the new challenges and realities facing scientific research? What is its place in society today? To answer these questions, the History and Philosophy of Sciences Unit of Geneva University, in collaboration with ASPERA, the European network for astroparticle physics research, has organised a programme of lectures entitled La réalité de la science d’aujourd’hui, enjeux et défis de la diversité. This series of lectures will provide researchers and members of the public with a snapshot of the state of science today from the perspective of laboratories and institutes, and on subjects such as funding policy and technological and legal impact. The first lecture will be given by science historian Dominique Pestre (EHESS & Centre Koyré, Paris), renowned for his contributions to the analysis of science past and present, and notably one of the authors of the work "History of CERN". He will discuss the modern methods of producing scientific knowledge which have been develop...

  17. Lecture programme The reality of science today

    CERN Multimedia

    2008-01-01

    John Ellis (CERN): Gauguin’s questions in the context of particle physics.John Ellis (CERN) will speak about: Gauguin’s questions in the context of particle physics In a famous painting, Paul Gauguin asked the universal and eternal questions: Where do we come from? What are we? Where are we going? In this lecture, John Ellis will comment on the prospects of particle physics in an attempt to provide elements of answers to these questions. This is the second in the series of lectures organised by the History and Philosophy of Sciences Unit of Geneva University, in collaboration with ASPERA, the European network for astroparticle physics research, which began with a contribution from Dominique Pestre (EHESS and Centre Koyré, Paris). What are the new challenges and realities facing research? What is its place in today’s society? In this series of lectures covering a range of topics, researchers and members of the general public are invited to think about the state of sc...

  18. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    Herr, J.

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, WLAP, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. The WLAP model is spreading. This summer, the CERN's High School Teachers program has used WLAP's system to record several physics lectures directed toward a broad audience. And a new project called MScribe, which is essentially the WLAP system coupled with an infrared tracking camera, is being used by the University of Michigan to record several University courses this academic year. All lectures can be viewed on any major platform with any common internet browser...

  19. Academic Training: Summer Student Lecture Programme

    CERN Multimedia

    2004-01-01

    Main Auditorium, bldg. 500 DATE TIME LECTURER TITLE Monday 12 July 09:15 - 10:00 G. Ross (The Rudolf Peierls Centre for Theoretical Physics & CERN) Fundamental Concepts of Particle Physics (1/6) 10:15 - 11:00 O. Bruening (CERN) Accelerators (1/5) 11:15 - 12:00 L. Di Lella (CERN) Introduction to Particle Physics (4/4) DATE TIME LECTURER TITLE Tuesday 13 July 09:15 - 10:00 G. Ross (The Rudolf Peierls Centre for Theoretical Physics & CERN) Fundamental Concepts of Particle Physics (2/6) 10:15 - 11:00 O. Bruening (CERN) Accelerators (2/5) 11:15 - 12:00 O. Bruening (CERN) G. Ross (The Rudolf Peierls Centre for Theoretical Physics & CERN) Discussion Session DATE TIME LECTURER TITLE Wednesday 14 July 09:15 - 10:00 G. Ross (The Rudolf Peierls Centre for Theoretical Physics & CERN) Fundamental Concepts of Particle Physics (3/6) 10:15 - 11:00 O. Bruening (CERN) Accelerators (3/5) 11:15 - 12:00 O. Bruening (CERN) Accelerators (4/5) 14:00 - ...

  20. Influence of thermo-mechanical processing on the microstructure of Cu-based shape memory alloys produced by powder metallurgy

    International Nuclear Information System (INIS)

    Rodriguez, P.P.; Ibarra, A.; Iza-Mendia, A.; Recarte, V.; Perez-Landazabal, J.I.; San Juan, J.; No, M.L.

    2003-01-01

    Cu-Al-Ni shape memory alloys processed by powder metallurgy show very good thermo-mechanical properties, much better than those found in alloys produced by conventional casting. In this paper, we present the microstructural characterisation of these powder metallurgy alloys in order to find the microscopic mechanisms, linked to the powder metallurgy processing method, which are indeed responsible of such good thermo-mechanical behaviour. Electron microscopy studies [scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM)] show that powder metallurgy processing creates a sub-grain structure characterised by the presence of low angle sub-boundaries. These sub-boundaries are found to be lying on {1 1 0} and {1 1 2} lattice planes and are composed by an arrangement of superdislocations. These sub-boundaries may improve ductility in two ways: acting as a sink of dislocations which promotes plastic deformation and decreasing stress concentration at grain boundaries. Moreover, since sub-boundaries act as weak obstacles for the movement of martensite plates, the improvement on ductility is accomplished by an adequate thermo-mechanical behaviour

  1. Self-Paced Tutorial Courses for Mineral Science - Metallurgy Departments. Final Progress Report (July 1975-August 1980).

    Science.gov (United States)

    Twidwell, L. G.

    Four courses in extractive metallurgy (Pyrometallurgy, Hydrometallurgy, Electrometallurgy; and Physical Chemistry of Iron and Steel) were prepared in a modular, self-paced format. Development of the course materials included: (1) preparation of course outlines by unit coordinators and advisory committees; (2) approval of course outlines (included…

  2. Physical metallurgy

    International Nuclear Information System (INIS)

    Adda, Y.; Dupouy, J.M.; Philibert, J.; Quere, S.

    1979-01-01

    This manual deals with the following subjects: plastic deformation of pure metals, yield strength in pure metals, work hardening in pure metals, hardening of solid solutions, recovery, recrystallization, crystal growth, creep, rupture and fatigue properties, metal transformations [fr

  3. Physical metallurgy

    International Nuclear Information System (INIS)

    Adda, Y.; Dupouy, J.M.; Philibert, J.; Quere, Y.

    1976-01-01

    In this manual, the following topics are discussed: thermodynamics of solid solutions, phase diagrams, properties of dilute solid solutions, structure of solid solutions, thermodynamics of surfaces, perfect dislocations, partial dislocations and stacking faults, interfaces, point defects

  4. Physical metallurgy

    International Nuclear Information System (INIS)

    Adda, Y.; Dupouy, J.M.; Philibert, J.; Quere, Y.

    1976-01-01

    In this manual the following topics are reviewed: macroscopic thermodynamics, statistical mechanics, quantum mechanics, cristallography, elasticity and anelasticity, and plastic deformation of a homogeneous medium [fr

  5. Physical metallurgy

    International Nuclear Information System (INIS)

    Adda, Y.; Dupouy, J.M.; Philibert, J.; Quere, Y.

    1976-01-01

    In this manual, the following topics are discussed: atomic vibrations, lattice thermal properties, chemical bonds, free electron model, band theory, properties of actinides, rare earths and transition metals, transport phenomena, magnetic properties, properties of liquid metals and amorphous state alloys

  6. Practical Metallurgy

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Deganello, Davide

    2003-01-01

    This is the report regards the activities carried out during the practical metatllurgy course concerning material properties and structures and their testing & analysis methods. During the course several aspects of the materials have been considered and different techniques have been analyzed....

  7. Environmental law. A course of lectures for a cross-disciplinary audience

    International Nuclear Information System (INIS)

    Schulte, H.

    1999-01-01

    Readers interested in getting more insight in the legal framework available for supporting environmental protection policy will find a comprehensive picture of the environmental law applicable in Germany. The format chosen for the book is that of a lecture series, so that the reader is given step-by-step orientation and systematic guidance in approaching the complex material. The positive law and the underlying scientific systems are explained. An introductory part discusses the legal instruments available for enforcement of environmental law, the position of environmental law within the entire legal system of Germany, as well as relevant aspects of the law of the European Union, and international law. The subsequent chapters present an exhaustive survey of the subjects and objectives of German environmental law, as well as the legal practice and the issues involved. The chapters' headings read as follows: Abatement and control of emissions; the structure and functions of the state; administrative powers and action; civil rights and environmental protection; atomic energy law; water protection; waste management; nature conservation; the law on chemicals; the law relating to genetic engineering. The final chapter discusses aspects of environmental liability. (orig./CB) [de

  8. Application of Microscopy and X-ray Diffraction in Optimization of the Production of NiTi Alloy by Powder Metallurgy

    Czech Academy of Sciences Publication Activity Database

    Novák, P.; Školáková, A.; Vojtěch, V.; Knaislová, A.; Pokorný, P.; Moravec, H.; Kopeček, Jaromír; Karlík, M.; Kubatík, Tomáš František

    2014-01-01

    Roč. 14, č. 3 (2014), s. 387-392 ISSN 1213-2489. [Mezinárodní konference „Mikroskopie a nedestruktivní zkoušení materiálů/3./. Litoměřice, 22.10.2014-24.10.2014] R&D Projects: GA ČR(CZ) GA14-03044S Institutional support: RVO:61389021 ; RVO:68378271 Keywords : powder metallurgy * NiTi, * mechanical alloying * reactive sintering Subject RIV: JG - Metallurgy; JG - Metallurgy (FZU-D) http://journal.strojirenskatechnologie.cz/templates/obalky_casopis/XIV_2014-3.pdf

  9. Assessment of vocal intensity in lecturers depending on acoustic properties of lecture rooms

    Directory of Open Access Journals (Sweden)

    Witold Mikulski

    2015-08-01

    Full Text Available Background: Lombard’s effect increases the level of vocal intensity in the environment, in which noise occurs. This article presents the results of the author’s own study of vocal intensity level and A-weighted sound pressure level of background noise during normal lectures. The aim of the study was to define whether above-mentioned parameters depend on acoustic properties of rooms (classrooms or lecture rooms and to define how many lectors speak with raised voice. Material and Methods: The study was performed in a group of 50 teachers and lecturers in 10 classrooms with cubature of 160–430 m3 and reverberation time of 0.37–1.3 s (group A consisted of 3 rooms which fulfilled, group B consisted of 3 rooms which almost fulfilled and group C consisted of 4 rooms which did not fulfill criteria based on reverberation time (maximum permissible value is 0.6–0.8 s according to PN-B-02151-4:2015. Criteria of raising voice were based on vocal intensity level (maximum value: 65 dB according to EN ISO 9921:2003. The values of above-mentioned parameters were determined from modes of A-weighted sound pressure level distributions during lectures. Results: Great differentiation of vocal intensity level between lectors was found. In classrooms of group A lectors were not using raised voice, in group B – 21%, and in group C – 60% of lectors were using raised voice. Conclusions: It was observed that acoustic properties of classrooms (defined by reverberation time exert their effect on lecturer’s vocal intensity level (i.e., raising voice, which may contribute to the increased risk of vocal tract illnesses. The occurrence of Lombard’s effect in groups of teachers and lecturers, conducting lectures in rooms, was evidenced. Med Pr 2015;66(4:487–496

  10. Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting

    Directory of Open Access Journals (Sweden)

    Sumesh Narayan

    2012-04-01

    Full Text Available The present research establishes a relationship of bulged diameter with densification and hydrostatic stress in forming of sintered iron (Fe powder metallurgy preforms cold upset under two different frictional conditions, namely, nil/no and graphite lubricant condition. Sintered plain carbon steel cylindrical preforms with carbon (C contents of 0, 0.35, 0.75 and 1.1% with constant initial theoretical density of 84% and aspect ratio of 0.4 and 0.6 were prepared using a suitable die-set assembly on a 1 MN capacity hydraulic press and sintered for 90 minutes at 1200 °C. Each sintered preform was cold upset under two different frictional constraints. It is seen that the degree of bulging reduces with reducing frictional constraints at the die contact surface. Further, it is found that the bulging ratio changed as a function of relative density and hydrostatic stress, respectively, according to the power law equations.

  11. Modeling of wear behavior of Al/B{sub 4}C composites produced by powder metallurgy

    Energy Technology Data Exchange (ETDEWEB)

    Sahin, Ismail; Bektas, Asli [Gazi Univ., Ankara (Turkey). Dept. of Industrial Design Engineering; Guel, Ferhat; Cinci, Hanifi [Gazi Univ., Ankara (Turkey). Dept. of Materials and Metallurgy Engineering

    2017-06-01

    Wear characteristics of composites, Al matrix reinforced with B{sub 4}C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B{sub 4}C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

  12. Modeling of wear behavior of Al/B4C composites produced by powder metallurgy

    International Nuclear Information System (INIS)

    Sahin, Ismail; Bektas, Asli; Guel, Ferhat; Cinci, Hanifi

    2017-01-01

    Wear characteristics of composites, Al matrix reinforced with B 4 C particles percentages of 5, 10,15 and 20 produced by the powder metallurgy method were studied in this study. For this purpose, a mixture of Al and B 4 C powders were pressed under 650 MPa pressure and then sintered at 635 C. The analysis of hardness, density and microstructure was performed. The produced samples were worn using a pin-on-disk abrasion device under 10, 20 and 30 N load through 500, 800 and 1200 mesh SiC abrasive papers. The obtained wear values were implemented in an artificial neural network (ANN) model having three inputs and one output using feed forward backpropagation Levenberg-Marquardt algorithm. Thus, the optimum wear conditions and hardness values were determined.

  13. Microstructure and microanalysis studies of copper-nickel-tin alloys obtained by conventional powder metallurgy processing

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Waldemar A.; Carrio, Juan A.G.; Masson, T.J.; Vitor, E.; Abreu, C.D.; Marques, I.M., E-mail: fisica.cch@mackenzie.br [Universidade Presbiteriana Mackenzie (CCH), Sao Paulo, SP (Brazil). Centro de Ciencias e Humanidades; Silva, L.C.E. da, E-mail: jgcarrio@mackenzie.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    The aim of this paper was to analyze the microstructural development in samples of Cu-Ni-Sn alloys (weight %) obtained by powder metallurgy (P/M). The powders were mixed for 1/2 hour. After this, they were pressed, in a cold uniaxial pressing (1000 kPa). In the next step the specimens were sintered at temperatures varying from 650 up to 780 deg C under vacuum. Secondly, the samples were homogenized at 500 deg C for several special times. The alloys were characterized by optical microscopy, electrical conductivity and Vickers hardness. X-rays powder diffraction data were collected for the sintered samples in order to a structural and microstructural analysis. The comparative analysis is based on the sintered density, densification parameter, hardness, macrostructures and microstructures of the samples. (author)

  14. A powder metallurgy austenitic stainless steel for application at very low temperatures

    CERN Document Server

    Sgobba, Stefano; Liimatainen, J; Kumpula, M

    2000-01-01

    The Large Hadron Collider to be built at CERN will require 1232 superconducting dipole magnets operating at 1.9 K. By virtue of their mechanical properties, weldability and improved austenite stability, nitrogen enriched austenitic stainless steels have been chosen as the material for several of the structural components of these magnets. Powder Metallurgy (PM) could represent an attractive production technique for components of complex shape for which dimension tolerances, dimensional stability, weldability are key issues during fabrication, and mechanical properties, ductility and leak tightness have to be guaranteed during operation. PM Hot Isostatic Pressed test plates and prototype components of 316LN-type grade have been produced by Santasalo Powdermet Oy. They have been fully characterized and mechanically tested down to 4.2 K at CERN. The fine grained structure, the absence of residual stresses, the full isotropy of mechanical properties associated to the low level of Prior Particle Boundaries oxides ...

  15. New evidence for prehistoric copper metallurgy in the vicinity of Bor

    Directory of Open Access Journals (Sweden)

    Kapuran Aleksandar

    2016-01-01

    Full Text Available The last three years of archaeological investigations at the site Ru`ana in Banjsko Polje, in the immediate vicinity of Bor, have provided new evidence regarding the role of non-ferrous metallurgy in the economy of the prehistoric communities of north-eastern Serbia. The remains of metallurgical furnaces and a large amount of metallic slags at two neighbouring sites in the mentioned settlement reveal that locations with many installations for the thermal processing of copper ore existed in the Bronze Age. We believe, judging by the finds of material culture, that metallurgical activities in this area also continued into the Iron Age and, possibly, into the 4th century AD. [Projekat Ministarstva nauke Republike Srbije, br. 177020: Archaeology of Serbia: Cultural identity, integration factors, technological processes and the role of the central Balkans in the development of European prehistory

  16. Annual report of the Metallurgy Division [for the] period ending December 1976

    International Nuclear Information System (INIS)

    Elayaperumal, K.; Gupta, C.K.; Mukhopadhyay, P.; Rao, S.V.K.

    1977-01-01

    An account of the work done in the Metallurgy Division of the Bhabha Atomic Research Centre, Bombay, during the calendar year 1976 is given. Some of the major achievements are: (1) production of boron carbide and boral sheet for the Trombay R-5 reactor under construction, (2) production of niobium metal for the manufacture of Zr-Nb-Cu alloy garter springs, (3) development of a process for graphite coating on zircaloy, (4) studies on structural and metal physics aspects of zirconium alloys and steels, (5) studies on the corrosion behaviour of zircaloy-2 as affected by the replacement of helium and stress corrosion cracking of zircaloy fuel tubes in iodine atmosphere and (6) production of high density UO 2 pellets with stable microstructures and sinterable magnesium oxide for MHD application. (M.G.B.)

  17. Encyclopedic dictionary bilingual English-Spanish of sciences: mining, chemistry, geology, metallurgy and environment

    International Nuclear Information System (INIS)

    Munoz Maradona, M.; Bellini, M.; Busleiman, M.

    2007-01-01

    This dictionary has been designed to satisfy scientists, researchers, technicians, interpreters, translators and students' needs in the areas of chemistry, geology, mining, metallurgy and environment for they find it necessary to have an English- Spanish encyclopedia on their sciences. It is a reliable book when looking for words that are normally not included in everyday dictionaries. It is now reaching the final revision stage with more than 15,000 entries. It includes scientific terms, chemical formulas of minerals and other elements, noticeable scientists' biographies, tables, graphics, and images so as to help readers' understanding. It is divided into three columns: the first one presents the English term and its area of concern; the second, the corresponding Spanish equivalent, and in the third, a suitable explanation.(author)

  18. Microstructure, mechanical behavior and biocompatibility of powder metallurgy Nb-Ti-Ta alloys as biomedical material.

    Science.gov (United States)

    Liu, Jue; Chang, Lin; Liu, Hairong; Li, Yongsheng; Yang, Hailin; Ruan, Jianming

    2017-02-01

    Microstructures, mechanical properties, apatite-forming ability and in vitro experiments were studied for Nb-25Ti-xTa (x=10, 15, 20, 25, 35at.%) alloys fabricated by powder metallurgy. It is confirmed that the alloys could achieve a relative density over 80%. Meanwhile, the increase in Ta content enhances the tensile strength, elastic modulus and hardness of the as-sintered alloys. When increasing the sintering temperatures, the microstructure became more homogeneous for β phase, resulting in a decrease in the modulus and strength. Moreover, the alloys showed a good biocompatibility due to the absence of cytotoxic elements, and were suitable for apatite formation and cell adhesion. In conclusion, Nb-25Ti-xTa alloys are potentially useful in biomedical applications with their mechanical and biological properties being evaluated in this work. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. 9th Mining and metallurgy international congress, Leon, 24-28 May 1994

    International Nuclear Information System (INIS)

    1994-01-01

    The 9th Mining and Metallurgy International Congress had 201 communications. These was articulated into 4th areas: 1.- Geological resources management and profit: 1.1- Geological and mining research on geologic resources. 1.2.- Non energetic mineral resources exploitation. 1.3- Hydro-geologic and geothermia resources. 1.4- Geologic resources and planning. 2.- Energy: 2.1.- Energetic mining.- 2.2 Oil and gas. 2.3.- Electricity production and distribution. 2.4.- Coal clean technologies. 2.5.- Energetic management. 3.- Material engineering: 3.1.- Minerallurgia and metallurgic processes. 3.2- Industrial minerals and ornamental 10cks. 3.3 .- Building materials. 3.4 Advanced technology materials. 4.- Environmental and territorial engineering in basic industry. 4.1.-Valuation of environmental impacts. 4.2.- Restoration engineering in mining. 4.3.- Effluent and residue engineering. 4.4.- Environmental management and clean technologies 4.5.- Natural and technological risks

  20. U3O8 from resin for powder-metallurgy fabrication of reactor fuel

    International Nuclear Information System (INIS)

    Mosley, W.C. Jr.

    1982-01-01

    A study was conducted to determine if cation exchange resin could be used to produce U 3 O 8 powder suitable for use in powder metallurgy fabrication of fuel tubes for production reactors at the Savannah River Plant (SRP). U 3 O 8 powders have been produced from three cation exchange resins: DOWEX (Dow Chemical Co.) 50W, AG (Bio-Rad Laboratories, Richmond, California) MP-50, and Bio-REX (Bio-Rad Laboratories, Richmond, California). This study included characterization of the thermal decomposition of uranium-loaded resins, measurement of properties of resin-based U 3 O 8 powders, and metallographic examination of U 3 O 8 -Al cores in extruded fuel tubes. Results to date show that AG MP-50 appears to be the best resin for producing U 3 O 8 powder suitable for the PM process. 20 figures