An official American thoracic society/European respiratory society statement: Key concepts and advances in pulmonary rehabilitation

NARCIS (Netherlands)

M.A. Spruit (Martijn); S.J. Singh (Sally); C. Garvey (Chris); R. Zu Wallack (Richard); L. Nici (Linda); C. Rochester (Carolyn); K. Hill (Kylie); A.E. Holland (Anne); S.C. Lareau (Suzanne); W.D.-C. Man (William); F. Pitta (Fabio); L. Sewell (Louise); J. Raskin (Jonathan); J. Bourbeau (Jean); R. Crouch (Rebecca); F.M.E. Franssen (Frits); R. Casaburi (Richard); J.H. Vercoulen (Jan); I. Vogiatzis (Ioannis); R.A.A.M. Gosselink (Rik); E.M. Clini (Enrico); T.W. Effing (Tanja); F. Maltais (François); J. van der Palen (Job); T. Troosters; D.J.A. Janssen (Daisy); E. Collins (Eileen); J. Garcia-Aymerich (Judith); D. Brooks (Dina); B.F. Fahy (Bonnie); M.A. Puhan (Milo); M. Hoogendoorn (Martine); R. Garrod (Rachel); A.M.W.J. Schols (Annemie); B. Carlin (Brian); R. Benzo (Roberto); P. Meek (Paula); M. Morgan (Mike); M.P.M.H. Rutten-van Mölken (Maureen); A.L. Ries (Andrew); B. Make (Barry); R.S. Goldstein (Roger); C.A. Dowson (Claire); J.L. Brozek (Jan); C.F. Donner (Claudio); E.F.M. Wouters (Emiel)

2013-01-01

textabstractBackground: Pulmonary rehabilitation is recognized as a core component of themanagement of individuals with chronic respiratory disease. Since the 2006 American Thoracic Society (ATS)/European Respiratory Society (ERS) Statement on Pulmonary Rehabilitation, there has been considerable

The 2017 hormone therapy position statement of The North American Menopause Society.

Science.gov (United States)

2017-07-01

The 2017 Hormone Therapy Position Statement of The North American Menopause Society (NAMS) updates the 2012 Hormone Therapy Position Statement of The North American Menopause Society and identifies future research needs. An Advisory Panel of clinicians and researchers expert in the field of women's health and menopause was recruited by NAMS to review the 2012 Position Statement, evaluate new literature, assess the evidence, and reach consensus on recommendations, using the level of evidence to identify the strength of recommendations and the quality of the evidence. The Panel's recommendations were reviewed and approved by the NAMS Board of Trustees.Hormone therapy (HT) remains the most effective treatment for vasomotor symptoms (VMS) and the genitourinary syndrome of menopause (GSM) and has been shown to prevent bone loss and fracture. The risks of HT differ depending on type, dose, duration of use, route of administration, timing of initiation, and whether a progestogen is used. Treatment should be individualized to identify the most appropriate HT type, dose, formulation, route of administration, and duration of use, using the best available evidence to maximize benefits and minimize risks, with periodic reevaluation of the benefits and risks of continuing or discontinuing HT.For women aged younger than 60 years or who are within 10 years of menopause onset and have no contraindications, the benefit-risk ratio is most favorable for treatment of bothersome VMS and for those at elevated risk for bone loss or fracture. For women who initiate HT more than 10 or 20 years from menopause onset or are aged 60 years or older, the benefit-risk ratio appears less favorable because of the greater absolute risks of coronary heart disease, stroke, venous thromboembolism, and dementia. Longer durations of therapy should be for documented indications such as persistent VMS or bone loss, with shared decision making and periodic reevaluation. For bothersome GSM symptoms not

An Official American Thoracic Society/European Respiratory Society Statement: Key Concepts and Advances in Pulmonary Rehabilitation

NARCIS (Netherlands)

Spruit, Martijn A.; Singh, Sally J.; Garvey, Chris; ZuWallack, Richard; Nici, Linda; Rochester, Carolyn; Hill, Kylie; Holland, Anne E.; Lareau, Suzanne C.; Man, W.D.C.; Pitta, Fabio; Sewell, Louise; Raskin, Jonathan; Bourbeau, Jean; Crouch, Rebecca; Franssen, Frits M.E.; Casaburi, Richard; Vercoulen, Jan H.; Vogiatzit, Ioannis; Gosselink, Rik; Clini, Enrico M.; Effing, T.W.; Maltais, Francois; van der Palen, Jacobus Adrianus Maria; Troosters, Thierry; Janssen, Daisy J.A.; Collins, Eileen; Garcia-Aymerich, Judith; Brooks, Dina; Fahy, Bonnie F.; Puhan, Milo A.; Hoogendoorn, Martine; Garrod, Rachel; Schols, Annemie M.W.J.; Carlin, Brian; Benzo, Roberto; Meek, Paula; Morgan, Mike; Rutten-van Mölken, Maureen P.M.H.; Ries, Andrew L.; Make, Barry; Goldstein, Roger S.; Dowson, Claire A.; Brozek, Jan L.; Donner, Claudio F.; Wouters, Emiel F.M.

2013-01-01

Background: Pulmonary rehabilitation is recognized as a core component of the management of individuals with chronic respiratory disease. Since the 2006 American Thoracic Society (ATS)/European Respiratory Society (ERS) Statement on Pulmonary Rehabilitation, there has been considerable growth in our

7th european metallurgical conference EMC 2013

Directory of Open Access Journals (Sweden)

Srećko R. Stopić

2014-02-01

Full Text Available From June 23 – 26, 2013, the GDMB Society for Mining, Metallurgy, Resource and Environmental Technology organized 7th European Metallurgical Conference (EMC 2013 in Weimar, Germany. The previous European metallurgical conferences were organized by  the GDMB in Friedrichshafen (2001, Hanover (2003, Leipzig (2005, Duesseldorf (2007, Innsbruck (2009, and Duesseldorf (2011. The GDMB is a non-profit organization from Clausthal, Germany,,focused on combining science with practical experience in metallurgy, mining, materials engineering, mineral processing, recycling and refining of metals, and  manufacturing of semi- and finishing products. The European Metallurgical conference EMC is one of the most well-known conferences worldwide in the field of non-ferrous metallurgy and is attended regularly by decision makers from industry and universities. The scientific program contained 6 plenary lectures and more than 130 presentations. An extensive poster exhibition was held, during which the authors had an opportunity to introduce their posters to the entire plenum as a part of a brief presentation., The € 500 worth “Poster Award EMC 2011 was awarded to Christoph Pichler from the Montan-University in Leoben, Austria. Not only the most important European countries were represented here, but also more than one third of the lecturers were from countries outside Europe (Canada, Japan, China, USA, South Africa, Australia. The origin of the participants reflects the aim of the organizers: to make this conference a worldwide platform for the scientific exchange of experience and information. The scientific presentations of the conference are presented in Proceedings: Vol. 1: Copper, Precious Metals, Waste effluents Treatment/ Biohydrometallurgical applications; Process Metallurgy, Bridging Non-Ferrous and Ferrous Metallurgy; Vol. 2: Lead and Zinc, Light metals, Sustainable technologies, Sustainable of non-ferrous metals production, Process Control

Metallurgical Research Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The purpose is to increase basic knowledge of metallurgical processing for controlling the microstructure and mechanical properties of metallic aerospace alloys and...

Maintaining Life-saving Testing for Patients With Infectious Diseases: Infectious Diseases Society of America, American Society for Microbiology, and Pan American Society for Clinical Virology Recommendations on the Regulation of Laboratory-developed Tests.

Science.gov (United States)

Caliendo, Angela M; Couturier, Marc R; Ginocchio, Christine C; Hanson, Kimberly E; Miller, Melissa B; Walker, Kimberly E; Frank, Gregory M

2016-07-15

In 2014, the US Food and Drug Administration (FDA) proposed to regulate laboratory-developed tests (LDTs)-diagnostics designed, manufactured, and used within a single laboratory. The Infectious Diseases Society of America, the American Society for Microbiology, and the Pan American Society for Clinical Virology recognize that the FDA is committed to protecting patients. However, our societies are concerned that the proposed regulations will limit access to testing and negatively impact infectious diseases (ID) LDTs. In this joint commentary, our societies discuss why LDTs are critical for ID patient care, hospital infection control, and public health responses. We also highlight how the FDA's proposed regulation of LDTs could impair patient access to life-saving tests and stifle innovation in ID diagnostics. Finally, our societies make specific recommendations for the FDA's consideration to reduce the burden of the proposed new rules on clinical laboratories and protect patients' access to state-of-the art, quality LDTs. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

American Nuclear Society 1994 student conference eastern region

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report contains abstracts from the 1994 American Nuclear Society Student Conference. The areas covered by these abstracts are: fusion and plasma physics; nuclear chemistry; radiation detection; reactor physics; thermal hydraulics; and corrosion science and waste issues.

American Nuclear Society 1994 student conference eastern region

International Nuclear Information System (INIS)

1994-01-01

This report contains abstracts from the 1994 American Nuclear Society Student Conference. The areas covered by these abstracts are: fusion and plasma physics; nuclear chemistry; radiation detection; reactor physics; thermal hydraulics; and corrosion science and waste issues

Proceedings of papers. 3. Balkan Metallurgical Conference

International Nuclear Information System (INIS)

Mickovski, Jovan

2003-01-01

This Conference aims to be a central event in the metallurgy research of Balkan, fulfilling the goals to present the most outstanding relevant developments in modern metallurgy; to inspire high standards of excellence in pure and applied metallurgy research; to attract outstanding scientists to present central lectures on modem metallurgical research, and on the challenges imposed by the needs of society; to inspire the young generation of metallurgists in Balkan and other countries. Following these lines, the 3. Balkan Conference on Metallurgy will provide a unique opportunity for academic and industrial metallurgists from the Balkan countries and wider, to exchange ideas, expertise, and experience on topics related to the theme of the Conference - Balkan Metallurgy in Search for New Ways of Development. The aim of the organizers was to bring together distinguished experts, not only to present their work, but also to discuss the major scientific and technological challenges facing metallurgy in this millennium.The 6 sections of the conference were entitled: Section A: Extractive metallurgy; Section B: Physical metallurgy and materials science - ferrous metals and non ferrous metals; Section C: Management, maintenance control and optimization of metallurgical processes; Section D: New technologies and techniques; Section E: Refractory and powder; Section F: Corrosion and protection of metals. Papers relevant to INIS are indexed separately

Official Executive Summary of an American Thoracic Society/American College of Chest Physicians Clinical Practice Guideline

DEFF Research Database (Denmark)

Schmidt, Gregory A; Girard, Timothy D; Kress, John P

2017-01-01

BACKGROUND: This clinical practice guideline addresses six questions related to liberation from mechanical ventilation in critically ill adults. It is the result of a collaborative effort between the American Thoracic Society (ATS) and American College of Chest Physicians (CHEST). METHODS: A mult...

TMI-2 VIP Metallurgical Program

International Nuclear Information System (INIS)

Diercks, D.R.; Neimark, L.A.

1991-01-01

The objectives of the TMI-2 VIP Metallurgical Program are to conduct metallurgical examinations and mechanical-property tests on samples of material removed from the lower head of the TMI-2 nuclear reactor in order to deduce the temperatures, determine the mechanical properties, and assess the integrity of the TMI-2 lower head during the loss-of-coolant accident. The TMI-2 Vessel Investigation Project Metallurgical Program is a part of the international TMI-2 Vessel Investigation Project being conducted jointly by the US Nuclear Regulatory Commission and the Organization for Economic Co-operation and Development. Participants in the international project include the US, Japan, the Federal Republic of Germany (FRG), Finland, France, Italy, Spain, Sweden, Switzerland, and the United Kingdom (UK). Fifteen samples have been removed from the lower head and are being examined. Mechanical tests will be conducted on specimens cut from these lower head samples. In addition, archive material from the lower head of the Midland nuclear reactor has been procured for conducting supplemental metallurgical evaluations and mechanical-property determinations. The information obtained from these examinations and tests, supplemented by results obtained from parallel examinations of instrument nozzles, guide tubes, and core debris at Argonne National Laboratory and the Idaho National Engineering Laboratory will be used to deduce a scenario for the loss-of-coolant accident and assess the integrity of the lower head during the accident

North American Society for Pediatric Gastroenterology, Hepatology and Nutrition

Science.gov (United States)

North American Society for Pediatric Gastroenterology, Hepatology and Nutrition Skip to Navigation NASPGHAN Annual Meeting and Postgraduate ... transition well. Moreover, Doc4me provides information about medications, nutrition and living with IBD. Please help us promote ...

Microwave-assisted grinding of metallurgical coke

International Nuclear Information System (INIS)

Ruisanchez, E.; Juarez-Perez, E. J.; Arenillas, A.; Bermudez, J. M.; Menendez, J. A.

2014-01-01

Metallurgical cokes are composed of graphitic carbon (s2p2) and different inorganic compounds with very different capacities to absorb microwave radiation. Moreover, due to the electric conductivity shown by the metallurgical cokes, microwave radiation produces electric arcs or microplasmas, which gives rise to hot spots. Therefore, when these cokes are irradiated with microwaves some parts of the particle experiment a rapid heating, while some others do not heat at all. As a result of the different expansion and stress caused by thermal the shock, small cracks and micro-fissures are produced in the particle. The weakening of the coke particles, and therefore an improvement of its grind ability, is produced. This paper studies the microwave-assisted grinding of metallurgical coke and evaluates the grinding improvement and energy saving. (Author)

the american colonization society's west african enterprise--colonial ...

African Journals Online (AJOL)

as the "American Society for Colonizing Free People of Color in the ... Significantly, findlay's brother-in-law was Elias Caldwell, Clerk of ... Representatives, and John Randolph of Virginia into the fledgling .... to Africa enterprise, one could easily despair for its success. The U.S . ..... Center, Maxwell Air Force Base, Alabama.

Democratization in the Gulf Monarchies and American Civil Society

OpenAIRE

Azam, M. Nazrul Islam and Muhammad; Azam, Muhammad

2015-01-01

The paper deals with the efforts made by American private sector and civil society actors after 2000 to popularize democratic values and norms in the six Gulf states, namely Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates. The study is focused on areas including politics, education, culture, media, human rights, and women empowerment. The paper also deals with approaches adopted, goals and objectives set and strategies devised and employed by the American NGOs regardi...

Democratization in the Gulf Monarchies and American Civil Society

OpenAIRE

Azam, M. Nazrul Islam and Muhammad

2010-01-01

The paper deals with the efforts made by American private sector and civil society actors after 2000 to popularize democratic values and norms in the six Gulf states, namely Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates. The study is focused on areas including politics, education, culture, media, human rights, and women empowerment. The paper also deals with approaches adopted, goals and objectives set and strategies devised and employed by the American NGOs regardi...

Substitutes for metallurgical coke in pyrometallurgical processes

Energy Technology Data Exchange (ETDEWEB)

Koshkarov, V.Ya.

1982-08-01

A briquetting process using sulphurous petroleum coke and a bituminous binder is described. The characteristics of briquettes made of petroleum coke, blends of coal and petroleum coke, and coal and metallurgical coke are compared. The prospect of replacing 25 to 50% of the metallurgical coke used in lime kilns with non-calcined petroleum coke briquettes is described. (4 refs.)

Development of radiation shielding standards in the American Nuclear Society

International Nuclear Information System (INIS)

Trubey, D.K.

1975-11-01

The American Nuclear Society (ANS) is a standards-writing organization-member of the American National Standards Institute (ANSI). The ANS Standards Committee has a subcommittee denoted ANS-6, Shielding, whose charge is to establish standards in connection with radiation protection and shielding, to provide shielding information to other standards writing groups, and to prepare recommended sets of shielding data and test problems. This paper is a progress report of this subcommittee

The focus of women in The American Fertility Society.

Science.gov (United States)

Haseltine, F P; Wentz, A C

1984-09-01

This article reports survey responses from 71 female members of the American Fertility Society during the Society's 1984 annual meeting. Survey questions concern 1) demographic factors such as rank, degree, title, address, and number of children, 2) field of specialization and research interests, and 3) what the Society can do for its meeting participants. The typical respondent is a physician living in the Eastern United States and employed as an assistant professor in an academic setting. In vitro fertilization is the greatest area of interest, followed by general practice, endocrine and male infertility, contraception, and fertility surgery. Survey responses show that women are interested in 1) networking, 2) increased visibility at professional meetings, 3) information about research possibilities and grants, 4) child care provision at Society meetings, and 5) more basic science and physiology oriented presentions in the program. In response to networking interests, the Society will make available information from the surveyed members. Since 16% of respondents have a PH.D., and 77% are employed in academics, the Society should consider more basic presentations. The need for day care indicates changes in Society membership. The Society plans to conduct similar surveys on a regular basis.

Sustainable cost reduction by lean management in metallurgical processes

Directory of Open Access Journals (Sweden)

A. V. Todorut

2016-10-01

Full Text Available This paper focuses on the need for sustainable cost reduction in the metallurgical industry by applying Lean Management (LM tools and concepts in metallurgical production processes leading to increased competitiveness of corporations in a global market. The paper highlights that Lean Management is a novel way of thinking, adapting to change, reducing waste and continuous improvement, leading to sustainable development of companies in the metallurgical industry. The authors outline the main Lean Management instruments based on recent scientific research and include a comparative analysis of other tools, such as Sort, Straighten, Shine, Standardize, Sustain (5S, Visual Management (VM, Kaizen, Total Productive Maintenance (TPM, Single-Minute Exchange of Dies (SMED, leading to a critical appraisal of their application in the metallurgical industry.

American College of Radiology-American Brachytherapy Society practice parameter for electronically generated low-energy radiation sources.

Science.gov (United States)

Devlin, Phillip M; Gaspar, Laurie E; Buzurovic, Ivan; Demanes, D Jeffrey; Kasper, Michael E; Nag, Subir; Ouhib, Zoubir; Petit, Joshua H; Rosenthal, Seth A; Small, William; Wallner, Paul E; Hartford, Alan C

This collaborative practice parameter technical standard has been created between the American College of Radiology and American Brachytherapy Society to guide the usage of electronically generated low energy radiation sources (ELSs). It refers to the use of electronic X-ray sources with peak voltages up to 120 kVp to deliver therapeutic radiation therapy. The parameter provides a guideline for utilizing ELS, including patient selection and consent, treatment planning, and delivery processes. The parameter reviews the published clinical data with regard to ELS results in skin, breast, and other cancers. This technical standard recommends appropriate qualifications of the involved personnel. The parameter reviews the technical issues relating to equipment specifications as well as patient and personnel safety. Regarding suggestions for educational programs with regard to this parameter,it is suggested that the training level for clinicians be equivalent to that for other radiation therapies. It also suggests that ELS must be done using the same standards of quality and safety as those in place for other forms of radiation therapy. Copyright © 2017 American Brachytherapy Society and American College of Radiology. Published by Elsevier Inc. All rights reserved.

Brief overview of American Nuclear Society's research reactor standards

International Nuclear Information System (INIS)

Richards, Wade J.

1984-01-01

The American Nuclear Society (ANS) established the research reactor standards group in 1968. The standards group, known as ANS-15, was established for the purpose of developing, preparing, and maintaining standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training

A history of the American Society for Clinical Investigation

Science.gov (United States)

Howell, Joel D.

2009-01-01

One hundred years ago, in 1909, the American Society for Clinical Investigation (ASCI) held its first annual meeting. The founding members based this new society on a revolutionary approach to research that emphasized newer physiological methods. In 1924 the ASCI started a new journal, the Journal of Clinical Investigation. The ASCI has also held an annual meeting almost every year. The society has long debated who could be a member, with discussions about whether members must be physicians, what sorts of research they could do, and the role of women within the society. The ASCI has also grappled with what else the society should do, especially whether it ought to take a stand on policy issues. ASCI history has reflected changing social, political, and economic contexts, including several wars, concerns about the ethics of biomedical research, massive increases in federal research funding, and an increasingly large and specialized medical environment. PMID:19348041

Production of iron from metallurgical waste

Science.gov (United States)

Hendrickson, David W; Iwasaki, Iwao

2013-09-17

A method of recovering metallic iron from iron-bearing metallurgical waste in steelmaking comprising steps of providing an iron-bearing metallurgical waste containing more than 55% by weight FeO and FeO equivalent and a particle size of at least 80% less than 10 mesh, mixing the iron-bearing metallurgical waste with a carbonaceous material to form a reducible mixture where the carbonaceous material is between 80 and 110% of the stoichiometric amount needed to reduce the iron-bearing waste to metallic iron, and as needed additions to provide a silica content between 0.8 and 8% by weight and a ratio of CaO/SiO.sub.2 between 1.4 and 1.8, forming agglomerates of the reducible mixture over a hearth material layer to protect the hearth, heating the agglomerates to a higher temperature above the melting point of iron to form nodules of metallic iron and slag material from the agglomerates by melting.

American Nuclear Society exchanges of information

International Nuclear Information System (INIS)

Du Temple, O.J.

2000-01-01

Many are familiar with the technical journals and other publications that American Nuclear Society (ANS) members receive. However, there is a whole series of documents that is helpful to any nuclear society group for a modest fee or no fee. The author is referring to documents such as the ANS Bylaws and Rules, which have been made available to almost every existing nuclear society in the world. He remembers working with groups from Russia, Europe, China, Japan, Brazil, France, Germany, and others when they sought the experience of ANS in establishing a society. Financial planning guides are available for meetings, international conferences, technical expositions, and teacher workshops. Periodically, the ANS publishes position papers on the uses and handling of fuel materials and other publications helpful to public relations and teacher training courses. A few have had distributions in the hundreds of thousands, and one went as high as 750,000. Some of these have been translated in part into Spanish, French, Portuguese, and Japanese. Nuclear Standards are developed by a series of ANS committees consisting of about 1000 experts--the largest technical operation of ANS. Buyers guides and directories are very helpful in promoting the commerce in the nuclear industry. The Utility Directory covers utilities all over the globe. Radwaste Solutions, the new name for the former Radwaste Magazine, covers the efforts made by all sectors--private, government, and utility--to deal with radioactive waste. In the author's opinion, the one area in which all societies are weak is in interfacing with the International Atomic Energy Agency (IAEA). Since his retirement 9 yr ago, he has become much more aware of the IAEA as a news and technical information source. The ANS is trying to be more aware of what the IAEA is doing for everyone

The American Nuclear Society's international student exchange program

International Nuclear Information System (INIS)

Bornstein, I.

1988-01-01

The American Nuclear Society's (ANS's) International Student Exchange Program sponsors bilateral exchanges of students form graduate schools in American universities with students from graduate schools in France, the Federal Republic of Germany (FRG), and Japan. The program, now in its 12th year, was initiated in response to an inquiry to Argonne National Laboratory (ANL) from the director of the Centre d'Etudes Nucleaires de Saclay proposing to send French nuclear engineering students to the United States for summer jobs. The laboratory was asked to accept two students to work on some nuclear technology activity and ANS was invited to send American students to France on an exchange basis. To date, 200 students have taken part in the program. It has been a maturing and enriching experience for them, and many strong and enduring friendships have been fostered among the participants, many of whom will become future leaders in their countries

Dilemmas of American Policy; Crucial Issues in Contemporary Society.

Science.gov (United States)

Cook, Samuel DuBois; And Others

This volume contains four papers dealing with key social issues confronting American society; racial conflict; education (especially concerning national policies and goals); rationale for limited war for a nonmilitaristic nation; and the generation gap. Dr. Cook discusses black identity and white response and the problem of inculcating hope where…

Review of the American Physical Society light water reactor safety study

International Nuclear Information System (INIS)

Budnitz, R.J.

1975-11-01

The issue of light-water reactor (LWR) safety has been the subject of a part-time, year-long study sponsored by the American Physical Society and supported by the National Science Foundation and the former Atomic Energy Commission. The 1974-1975 study produced a Report by the Study Group to the Society. The Report's ''Summary of Conclusions and Major Recommendations'' section is presented

Synopsis of History of American Society for Therapeutic Radiology and Oncology 1958-2008

International Nuclear Information System (INIS)

Montana, Gustavo S.

2008-01-01

Purpose: To provide a synopsis of the history of the association of radiation oncologists in the United States, currently known as the American Society for Therapeutic Radiology and Oncology (ASTRO), with the occasion of the 50th anniversary of the organization. Methods and Materials: The history of ASTRO, from its beginning as the American Club of Therapeutic Radiologists, is the subject of a book that is to be released with the occasion of the 50th Annual Meeting of the Society in 2008. This book was prepared by members of ASTRO's History Committee and History Working Subcommittee. The source material for the book was the archives of the Society and recorded interviews, conducted by members of the subcommittee, of members of the Society and of the past and present Society staff. The book was also based on previously published material. This article used the source material used for the Society anniversary book. Results: This synopsis of the history of the Society will provide a source of reference for anyone interested in the history of the Society from its foundation in 1958 to the present, 2008

Comparison of British Thoracic Society and American Thoracic Society reintroduction guidelines for anti-tuberculous therapy induced liver injury

International Nuclear Information System (INIS)

Zuberi, B. F.; Alvi, H.; Zuberi, F. F.; Salahuddin, J.

2014-01-01

Objective: To compare the efficacy of British Thoracic Society and American Thoracic Society guidelines for re-introduction of anti-tuberculous therapy after drug-induced liver injury, and to assess the ease of administration of each guideline on a scale of 1-10. Methods: The randomised prospective interventional study was conducted at the Department of Medicine and Pulmonology, Dow University of Health Sciences, Karachi, from December 2011 to November 2013. Patients with anti-tuberculous therapy drug-induced liver injury were selected. Hepatotoxic anti-tuberculous therapy was stopped and modified anti-tuberculous therapy was started. Patients were followed weekly till clinical and biochemical parameters got stabilised. After stabilisation, the patients were randomised to one of the two groups to receive re-introduction of anti-tuberculous therapy under the guidelines of British Thoracic Society (Group I) or those of American Thoracic Society (Group II). Means of the groups were analysed by Student's t test and proportions were compared by chi-square test. Multivariate analysis was done for age, body mass index and serum albumin for recurrence of drug-induced liver injury after the re-introduction. P value <0.05 was taken as significant. Results: Of the total 325 patients, 163(50.15%) were in Group I, while 162(49.84%) were in Group II. The frequency of recurrence of drug-induced liver injury in Group I was 16 (9.8%) and in Group II it was 18 (11.1%). There was no statistically significant difference between the two groups (p<0.7). Age was positively related with drug-induced liver injury, while body mass index and serum albumin were negatively associated. Conclusion: There was no significant difference between the two major guidelines though the American Thoracic Society guideline was easier to follow. (author)

Metallurgical coating system

International Nuclear Information System (INIS)

Daniels, L.C.; Whittaker, G.S.

1984-01-01

The present invention relates to a novel metallurgical coating system which provides corrosion resistance and non-stick properties to metallic components which are subjected to unusually severe operating conditions. The coating system comprises a first layer comprising tantalum which is deposited upon a substrate and a second layer comprising molybdenum disilicide which is deposited upon the first layer

The 6th European metallurgical conference EMC 2011: Proceedings review

Directory of Open Access Journals (Sweden)

Srećko R. Stopić

2011-10-01

Full Text Available The GDMB Society for Mining, Metallurgy, Resource and Environmental Technology organized the 6th European Metallurgical Conference (2011 in Duesseldorf from June 26 to 29, 2011. The same venue hosted the most important international metallurgical trade fairs for metallurgy of iron and steel, new casting and thermochemical processes METEC, GIFA, THERMOPROCESS and NEWCAST. The previous European metallurgical conferences were organized by GDMB in Friedrichshafen (2001, Hanover (2003, Leipzig (2005, Duesseldorf (2007, Innsbruck (2009. The GDMB is a non-profit organization situated in Clausthal in Germany, which is related to combining science with the practical experience in metallurgy, mining, materials engineering, mineral processing, recycling and refining of metals, and manufacturing of semi- and finishing products. The European Metallurgical conference EMC is one of the most known conferences worldwide in the field of non-ferrous metallurgy and is attended regularly by the decision makers from the industry and universities. The scientific program contained 6 plenary lectures and more than 160 presentations from 40 countries in 5 parallel series. An extensive poster exhibition was held, during which the authors had an opportunity to introduce their posters to the entire plenum as a part of a brief presentation. The best poster from the Montan-University in Leoben, Austria, was awarded the € 500 'Poster Award EMC 2011'. Not only were the most important European countries represented here, more than one third of the lecturers were from the non-European countries (Canada, Japan, China, USA, South Africa, Australia. The origin of the participants reflects the aim of the organizers: to make this conference a worldwide platform for the scientific exchange of experience and information. More than 400 participants from all over the world participated at this conference. The scientific presentations of the conference are presented in five Proceedings

The American nuclear Society's educational outreach programme

International Nuclear Information System (INIS)

Zacha, N.J.

1994-01-01

The American Nuclear Society has an extensive program of public educational outreach in the area of nuclear science and technology. A teacher workshop program provides up to five days of hands-on experiments, lectures, field trips, and lesson plan development for grades 6-12 educators. Curriculum materials have been developed for students in grades kindergarten through grade 12. A textbook review effort provides reviews of existing textbooks as well as draft manuscripts and textbook proposals, to ensure that the information covered on nuclear science and technology is accurate and scientifically sound

Discussion of the Investigation Method on the Reaction Kinetics of Metallurgical Reaction Engineering

Science.gov (United States)

Du, Ruiling; Wu, Keng; Zhang, Jiazhi; Zhao, Yong

Reaction kinetics of metallurgical physical chemistry which was successfully applied in metallurgy (as ferrous metallurgy, non-ferrous metallurgy) became an important theoretical foundation for subject system of traditional metallurgy. Not only the research methods were very perfect, but also the independent structures and systems of it had been formed. One of the important tasks of metallurgical reaction engineering was the simulation of metallurgical process. And then, the mechanism of reaction process and the conversion time points of different control links should be obtained accurately. Therefore, the research methods and results of reaction kinetics in metallurgical physical chemistry were not very suitable for metallurgical reaction engineering. In order to provide the definite conditions of transmission, reaction kinetics parameters and the conversion time points of different control links for solving the transmission and reaction equations in metallurgical reaction engineering, a new method for researching kinetics mechanisms in metallurgical reaction engineering was proposed, which was named stepwise attempt method. Then the comparison of results between the two methods and the further development of stepwise attempt method were discussed in this paper. As a new research method for reaction kinetics in metallurgical reaction engineering, stepwise attempt method could not only satisfy the development of metallurgical reaction engineering, but also provide necessary guarantees for establishing its independent subject system.

77 FR 56650 - Food and Drug Administration/American Glaucoma Society Workshop on the Validity, Reliability, and...

Science.gov (United States)

2012-09-13

...] Food and Drug Administration/American Glaucoma Society Workshop on the Validity, Reliability, and... entitled ``FDA/American Glaucoma Society (AGS) Workshop on the Validity, Reliability, and Usability of... research. The purpose of this public workshop is to provide a forum for discussing the validity...

HIT Solar Cells with N-Type Low-Cost Metallurgical Si

Directory of Open Access Journals (Sweden)

Xing Yang

2018-01-01

Full Text Available A conversion efficiency of 20.23% of heterojunction with intrinsic thin layer (HIT solar cell on 156 mm × 156 mm metallurgical Si wafer has been obtained. Applying AFORS-HET software simulation, HIT solar cell with metallurgical Si was investigated with regard to impurity concentration, compensation level, and their impacts on cell performance. It is known that a small amount of impurity in metallurgical Si materials is not harmful to solar cell properties.

American Pediatric Society 2013 presidential address: 125th anniversary of the American Pediatric Society--lessons from the past to guide the future.

Science.gov (United States)

Stoll, Barbara J

2013-10-01

This year is the 125th anniversary of the American Pediatric Society (APS), a time to reflect on the past 125 years of child health and child health research, a time to consider the health of America's children in a social and global context, and a time to consider the future. This paper is a combination of pediatric and APS history and personal story.

Processing and utilization of metallurgical slag

Directory of Open Access Journals (Sweden)

Alena Pribulová

2016-06-01

Full Text Available Metallurgy and foundry industry create a huge amount of slags that are by-products in production of pig iron, steel and cast iron. Slag is produced in a very large amount in pyrometallurgical processes, and is a huge source of waste if not properly recycled and utilized. With rapid growth of industrialization, land available for land-filling of large quantity of metallurgical slag is being reduced all over the world and disposal cost is becoming increasingly higher. Metallurgical slag from different metallurgical processes treated and utilized in different ways based on different slag characteristics. The most economic and efficient option for reducing metallurgical waste is through recycling, which is a significant contribution to saving natural resources and reducing CO2 emissions. Characteristic of slags as well as its treatment and utilization are given in the paper. Slag from pig iron and steel production is used most frequently in building industry. From experiments using blast furnace slag and granulated blast furnace slag as gravel, and water glass as binder it can be concluded that that the best results – the best values of compression strength and tensile strength were reached by using of 18% of water glass as a solidification activating agent. According to cubic compression strength, mixture from 50% blast furnace gravel, 50% granulated blast furnace slag and 18% water glass falls into C35/45 class of concrete. Such concrete also fulfils strength requirements for road concrete, moreover, it even exceeds them considerably and, therefore, it can find an application in construction of road communications or in production of concrete slabs.

The use of radioisotope tracers in the metallurgical industries

International Nuclear Information System (INIS)

Easey, J.F.

1987-01-01

Radioisotope techniques have been widely used in the metallurgical industries for many years. They have been shown to be very suitable for studying large scale plant and, in many cases, they are the most suitable techniques for such investigations. Applications of radioisotope tracers to some specific metallurgical problems are discussed. (author)

Kokes Awards for the 23rd North American Catalysis Society Meeting

Energy Technology Data Exchange (ETDEWEB)

Jacobs, Gary [University of Kentucky Research Foundation, Lexington, KY (United States)

2014-01-31

The Tri-State Catalysis Society awarded 107 Kokes Travel Awards. The program was very successful and to date this was the most Kokes Travel Awards ever awarded at a North American Catalysis Society Meeting. It provided students who merited an award the opportunity to attend the meeting, present a paper in the form of either an oral presentation or a poster presentation, and to serve the North American Catalysis Society by participating in the organization of the meeting. Students worked very hard during the week of the meeting to make it a success. Financial support for the Kokes awards was provided by DOE, NSF, NACS, as well as the Tri-State Catalysis Society, the latter through fund raising activities, and other donations. AT the meeting, each student received over $1050 in kind to offset the costs of registration fees ($260), hotel accommodations ($295.7), transportation ($400 travel allowance), as well as T-shirts ($20), and banquet tickets ($95 provided by donations from society members). In addition, for the first time, students received certificates that were signed by the President of NACS, Professor Enrique Iglesia, and by the Kokes Awards Chair, Gary Jacobs (see last page). A list of meeting co-chairs (i.e., Uschi M. Graham, Umit S. Ozkan, and Madan Bhassin) and the honorary chair (Burtron H. Davis) was also included on the certificate, along with the name of the recipient. The awardees were chosen on a merit-based guideline which also included the requirements of having a presentation accepted at the meeting and being a student at a North American University. The Richard J. Kokes Student Travel Award Committee (Gary Jacobs, Rodney Andrews, and Peter Smirniotis) with help from the Organizing Committee were able to secure money from four sources as detailed in Table 1. As detailed by our Treasurer, Dr. Helge Toufar of Clariant, the total amount spent was $105,000.

American Chemical Society. Division of Nuclear Chemistry and Technology

International Nuclear Information System (INIS)

Anon.

1991-01-01

The meeting of the 201st American Chemical Society Division of Nuclear Chemistry and Technology was comprised from a variety of topics in this field including: nuclear chemistry, nuclear physics, and nuclear techniques for environmental studies. Particular emphasis was given to fundamental research concerning nuclear structure (seven of the nineteen symposia) and studies of airborne particle monitoring and transport (five symposia). 105 papers were presented

Position of the American Dietetic Association and American Society for Nutrition: obesity, reproduction, and pregnancy outcomes.

Science.gov (United States)

Siega-Riz, Anna Maria; King, Janet C

2009-05-01

Given the detrimental influence of maternal overweight and obesity on reproductive and pregnancy outcomes for the mother and child, it is the position of the American Dietetic Association and the American Society for Nutrition that all overweight and obese women of reproductive age should receive counseling on the roles of diet and physical activity in reproductive health prior to pregnancy,during pregnancy, and in the inter conceptional period, in order to ameliorate these adverse outcomes. The effect of maternal nutritional status prior to pregnancy on reproduction and pregnancy outcomes is of great public health importance. Obesity in the United States and worldwide has grown to epidemic proportions, with an estimated 33% of US women classified as obese. This position paper has two objectives: (a) to help nutrition professionals become aware of the risks and possible complications of overweight and obesity for fertility,the course of pregnancy, birth outcomes, and short- and long-term maternal and child health outcomes;and (b) related to the commitment to research by the American Dietetic Association and the American Society for Nutrition, to identify the gaps in research to improve our knowledge of the risks and complications associated with being overweight and obese before and during pregnancy.Only with an increased knowledge of these risks and complications can health care professionals develop effective strategies that can be implemented before and during pregnancy as well as during the inter conceptional period to ameliorate adverse outcomes.

New radionuclide specific laboratory detection system for metallurgical industry

International Nuclear Information System (INIS)

Burianova, L.; Solc, J.; Dryak, P.; Moser, H.; Branger, T.; Garcia-Torano, E.; Peyres, V.; Capogni, M.; Luca, A.; Vodenik, B.; Oliveira, C.; Portugal, L.; Tzika, F.; Lutter, G.; Szucs, L.; Dziel, T.; Burda, O.; Dirk, A.; Martinkovic, J.; Sliskonen, T.; Mattila, A.

2014-01-01

One of the main outputs of the European Metrology Research Programme (EMRP) project 'Ionising radiation metrology for the metallurgical industry' (MetroMetal) was the recommendation on a novel spectrometric detection system optimized for the measurement of radioactivity in metallurgical samples. The recommended system, prototypes of which were constructed at two project partner's laboratories, was characterized by using Monte Carlo (MC) simulations. Six different MC codes were used to model the system and a range of cylindrical samples of cast steel, slag and fume dust. The samples' shape, density, and elemental composition were the same as the ones of the calibration standards developed within the project to provide traceability to end-users. The MC models were used to calculate full-energy peak and total detection efficiencies as well as true coincidence summing correction (TCSC) factors for selected radionuclides of interest in the metallurgical industry: 60 Co, 137 Cs, 192 Ir, 214 Bi, 214 Pb, and 208 Tl. The MC codes were compared to each other on the basis of the calculated detection efficiencies and TCSC factors. In addition, a 'Procedural guide for calculation of TCSC factors for samples in metallurgical industry' was developed for end-users. The TCSC factors reached in certain cases up to 32% showing that the summing effects are of high importance in the close measurement geometries met in routine analysis of metallurgical samples. (authors)

Soft restructuring process in metallurgical enterprises in Poland

Directory of Open Access Journals (Sweden)

B. Gajdzik

2015-10-01

Full Text Available This article presents the range and outcomes of soft restructuring in metallurgical enterprises in Poland. The term ‘soft restructuring’ applies to changes in metallurgical enterprises’ employment policy during the period of political transformation in Poland. Steelworks performance under the market economy conditions demanded introducing changes in staff resources. Changes referred both to the staff structure as well as employees’ skills and gradual engaging of the staff in building the steelworks’ competitive advantage.

Energy-dissipation-model for metallurgical multi-phase-systems

Energy Technology Data Exchange (ETDEWEB)

Mavrommatis, K.T. [Rheinisch-Westfaelische Technische Hochschule Aachen, Aachen (Germany)

1996-12-31

Entropy production in real processes is directly associated with the dissipation of energy. Both are potential measures for the proceed of irreversible processes taking place in metallurgical systems. Many of these processes in multi-phase-systems could then be modelled on the basis of the energy-dissipation associated with. As this entity can often be estimated using very simple assumptions from first principles, the evolution of an overall measure of systems behaviour can be studied constructing an energy-dissipation -based model of the system. In this work a formulation of this concept, the Energy-Dissipation-Model (EDM), for metallurgical multi-phase-systems is given. Special examples are studied to illustrate the concept, and benefits as well as the range of validity are shown. This concept might be understood as complement to usual CFD-modelling of complex systems on a more abstract level but reproducing essential attributes of complex metallurgical systems. (author)

Energy-dissipation-model for metallurgical multi-phase-systems

Energy Technology Data Exchange (ETDEWEB)

Mavrommatis, K T [Rheinisch-Westfaelische Technische Hochschule Aachen, Aachen (Germany)

1997-12-31

Entropy production in real processes is directly associated with the dissipation of energy. Both are potential measures for the proceed of irreversible processes taking place in metallurgical systems. Many of these processes in multi-phase-systems could then be modelled on the basis of the energy-dissipation associated with. As this entity can often be estimated using very simple assumptions from first principles, the evolution of an overall measure of systems behaviour can be studied constructing an energy-dissipation -based model of the system. In this work a formulation of this concept, the Energy-Dissipation-Model (EDM), for metallurgical multi-phase-systems is given. Special examples are studied to illustrate the concept, and benefits as well as the range of validity are shown. This concept might be understood as complement to usual CFD-modelling of complex systems on a more abstract level but reproducing essential attributes of complex metallurgical systems. (author)

ACC/AATS/AHA/ASE/ASNC/SCAI/SCCT/STS 2017 Appropriate Use Criteria for Coronary Revascularization in Patients With Stable Ischemic Heart Disease : A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, and Society of Thoracic Surgeons.

Science.gov (United States)

Patel, Manesh R; Calhoon, John H; Dehmer, Gregory J; Grantham, James Aaron; Maddox, Thomas M; Maron, David J; Smith, Peter K

2017-10-01

The American College of Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Thoracic Surgeons, and American Association for Thoracic Surgery, along with key specialty and subspecialty societies, have completed a 2-part revision of the appropriate use criteria (AUC) for coronary revascularization. In prior coronary revascularization AUC documents, indications for revascularization in acute coronary syndromes and stable ischemic heart disease (SIHD) were combined into 1 document. To address the expanding clinical indications for coronary revascularization, and to align the subject matter with the most current American College of Cardiology/American Heart Association guidelines, the new AUC for coronary artery revascularization were separated into 2 documents addressing SIHD and acute coronary syndromes individually. This document presents the AUC for SIHD.Clinical scenarios were developed to mimic patient presentations encountered in everyday practice. These scenarios included information on symptom status; risk level as assessed by noninvasive testing; coronary disease burden; and, in some scenarios, fractional flow reserve testing, presence or absence of diabetes, and SYNTAX score. This update provides a reassessment of clinical scenarios that the writing group felt were affected by significant changes in the medical literature or gaps from prior criteria. The methodology used in this update is similar to the initial document but employs the recent modifications in the methods for developing AUC, most notably, alterations in the nomenclature for appropriate use categorization.A separate, independent rating panel scored the clinical scenarios on a scale of 1 to 9. Scores of 7 to 9 indicate that revascularization is considered appropriate for the clinical scenario presented. Scores of 1 to 3 indicate that revascularization is considered rarely appropriate for the clinical scenario, whereas scores in the mid-range of 4 to 6 indicate that

The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines-Anticoagulation During Cardiopulmonary Bypass.

Science.gov (United States)

Shore-Lesserson, Linda; Baker, Robert A; Ferraris, Victor A; Greilich, Philip E; Fitzgerald, David; Roman, Philip; Hammon, John W

2018-02-01

Despite more than a half century of "safe" cardiopulmonary bypass (CPB), the evidence base surrounding the conduct of anticoagulation therapy for CPB has not been organized into a succinct guideline. For this and other reasons, there is enormous practice variability relating to the use and dosing of heparin, monitoring heparin anticoagulation, reversal of anticoagulation, and the use of alternative anticoagulants. To address this and other gaps, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiologists, and the American Society of Extracorporeal Technology developed an Evidence Based Workgroup. This was a group of interdisciplinary professionals gathered to summarize the evidence and create practice recommendations for various aspects of CPB. To date, anticoagulation practices in CPB have not been standardized in accordance with the evidence base. This clinical practice guideline was written with the intent to fill the evidence gap and to establish best practices in anticoagulation therapy for CPB using the available evidence. To identify relevant evidence, a systematic review was outlined and literature searches were conducted in PubMed using standardized medical subject heading (MeSH) terms from the National Library of Medicine list of search terms. Search dates were inclusive of January 2000 to December 2015. The search yielded 833 abstracts, which were reviewed by two independent reviewers. Once accepted into the full manuscript review stage, two members of the writing group evaluated each of 286 full papers for inclusion eligibility into the guideline document. Ninety-six manuscripts were included in the final review. In addition, 17 manuscripts published before 2000 were included to provide method, context, or additional supporting evidence for the recommendations as these papers were considered sentinel publications. Members of the writing group wrote and developed recommendations based on review of the articles obtained and achieved

NREL Scientist Selected for Major Award by the American Chemical Society

Science.gov (United States)

contributions to the advancement of surface chemistry. The 160,000-member American Chemical Society selected Dr Chemistry. The award recognizes his many research, teaching, writing and administrative accomplishments adjunct professor of chemistry, physics and engineering at the University of Denver and the author or co

SOCIAL CLEAVAGES IN THE AMERICAN SOCIETY AS A FACTOR OF 2016 PRESIDENTIAL CAMPAIGN

Directory of Open Access Journals (Sweden)

P. S. Kanevskiy

2017-01-01

Full Text Available Current article is dedicated to analysis of social cleavages in the American elections and the ways they influenced on presidential election in 2016. Originally developed by S. Rokkan and S.M. Lipset, social cleavages became a classic theme for contemporary political sociology. However, despite the fact that the theory has been developing primarily by Americans, it has been rarely used to analyze electoral system in the USA. Traditionally it’s been aimed at European and developing countries where electoral fragmentation is seen more clearly. But recent changes in the American society and the political system demonstrate the emergence of social cleavages that had not been inherent before. The article shows how American electoral space transformed since the 1980s and how it became more fragmented under the influence of social, economic and ideological factors. Elections in 2016 became a watershed for social cleavages that accumulated through time and aggravated even more considering internal crises in the Democratic and more so in the Republican parties. Donald Trump’s victory is an impersonation of the American party system crisis and of the mainstream politicians’ inability to find proper explanation of the changing electorate. Author shows that American society today is polarized even more than many European countries while group identification determines vectors of political change.

75 FR 80730 - Francis Slakey on Behalf of the American Physical Society; Receipt of Petition for Rulemaking

Science.gov (United States)

2010-12-23

... [Docket No. PRM-70-9; NRC-2010-0372] Francis Slakey on Behalf of the American Physical Society; Receipt of... the NRC by Francis Slakey on behalf of the American Physical Society (APS). The petition was docketed... that over the next few years, the NRC would be reviewing license applications for new technologies, and...

Cleaner metallurgical industry in Serbia: a road to the sustainable development

Directory of Open Access Journals (Sweden)

D. Panias

2009-01-01

Full Text Available Since the sustainable development has been a global and fundamental objecttive, a metallurgical industrial sector faces some of the most difficult sustainability challenges of any industrial sector. On the other hand, the metallurgical production in Serbia is a very important part of the economy. Due to present facilities and technologies, metallurgical companies face a great challenge to fulfill the requirements introduced by legislature referring to the cleaner production and sustainable development. The state of art in the production, facilities, pollution with some answers to imposed challenges is presented.

American Society of Maxillofacial Surgeons 2006 to 2016: Another Decade of Excellence in Education and Research.

Science.gov (United States)

Doumit, Gaby; Totonchi, Ali; Wexler, Andy; Gosain, Arun K

2017-09-01

Over the past 10 years, the American Society of Maxillofacial Surgeons (ASMS) has continued to advance to meet its mission of being the premier organization to represent maxillofacial and pediatric plastic surgery in the United States. These advances are focused on education of its members, to include the American Society of Maxillofacial Surgeons basic course, the preconference symposium, the annual meeting, two basic maxillofacial courses per year, advanced maxillofacial courses, a boot camp for craniofacial fellows, a cleft course, quarterly webinars, sponsored fellowships, a visiting professorship, and the ASMS journal. In addition, the ASMS has continued to advance as the premier national organization representing maxillofacial and pediatric plastic surgery in the United States, thereby positioning the organization as a primary advocate for these surgical specialties. Outreach of the ASMS has grown over the past decade and now includes representatives to the American Society of Plastic Surgeons/Plastic Surgery Foundation, the American Board of Plastic Surgeons, the American Medical Association, and most recently a seat as a governor with the American College of Surgeons. The ASMS has also initiated an annual Summer Leadership Seminar to explore topics of relevance in a changing health care environment. The present report outlines the major initiatives of the ASMS over the past 10 years.

Job Prospects for Metallurgical Engineering.

Science.gov (United States)

Basta, Nicholas

1985-01-01

Job prospects in mining, metal-extraction, steel, and refining industries are depressed, but technological discoveries are opening up new fields for metallurgical engineers. Enrollment/employment opportunities and salaries in these areas are discussed a well as the roles of foreign competition, plastics applications, and ceramics research and…

Diagnosis of employee engagement in metallurgical enterprise

Directory of Open Access Journals (Sweden)

B. Gajdzik

2013-01-01

Full Text Available In the theoretical part of the publication an overview of the definitions of employee engagement was conducted together with the analysis of the methods and techniques which influence the professional activity of the employees in the metallurgical enterprise. The practical part discusses the results of diagnosis of engagement in steelworks. Presented theories, as well as the research, fill the information gap concerning the engagement of the employees in metallurgical enterprises. This notion is important due to the fact that modern conditions of human resources management require the engagement of the employees as something commonly accepted and a designation of manufacturing enterprises.

Effect of metallurgical variables on environmental fracture of steels

Energy Technology Data Exchange (ETDEWEB)

Bernstein, I M; Thompson, A W

1976-12-01

The susceptibility of iron alloys, in particular, steels, to hydrogen embrittlement is examined. It is demonstrated by a review of available data on metallurgically well-characterized alloys that the nature and extent of hydrogen susceptibility are sensitive and often predictable functions of such metallurgical variables as composition, grain size, texture, microstructure, and thermal treatment. Specifically, solutes such as carbon and manganese are shown to be capable of leading to a degradation of performance in hydrogen, whereas silicon and titanium are often beneficial additions. Microstructures at equivalent strength levels are ranked in order of susceptibility; generally, a refined substructure gives the best results. The role of heat treatment in controlling the hydrogen-induced crack path and its relationship to thermal embrittlement phenomena are stressed. Finally, possible hydrogen embrittlement mechanisms are assessed in terms of the critical roles of metallurgical variables in the embrittlement.

Biopesticides: State of the Art and Future Opportunities by the American Chemical Society

Science.gov (United States)

This chapter from an American Chemical Society symposium reviews areas including how EPA views the benefits of biopesticides, related laws and legal requirements, biopesticide registration, and biopesticide data requirements.

An Official American Thoracic Society Research Statement

DEFF Research Database (Denmark)

Slatore, Christopher G; Horeweg, Nanda; Jett, James R

2015-01-01

BACKGROUND: Pulmonary nodules are frequently detected during diagnostic chest imaging and as a result of lung cancer screening. Current guidelines for their evaluation are largely based on low-quality evidence, and patients and clinicians could benefit from more research in this area. METHODS......: In this research statement from the American Thoracic Society, a multidisciplinary group of clinicians, researchers, and patient advocates reviewed available evidence for pulmonary nodule evaluation, characterized six focus areas to direct future research efforts, and identified fundamental gaps in knowledge...... demographic and nodule characteristics with patient-level outcomes. Methods to share data from registries are also necessary. CONCLUSIONS: This statement may help researchers to develop impactful and innovative research projects and enable funders to better judge research proposals. We hope...

American Society of Clinical Oncology/College of American Pathologists guideline recommendations for human epidermal growth factor receptor 2 testing in breast cancer

NARCIS (Netherlands)

Wolff, Antonio C.; Hammond, M. Elizabeth H.; Schwartz, Jared N.; Hagerty, Karen L.; Allred, D. Craig; Cote, Richard J.; Dowsett, Mitchell; Fitzgibbons, Patrick L.; Hanna, Wedad M.; Langer, Amy; McShane, Lisa M.; Paik, Soonmyung; Pegram, Mark D.; Perez, Edith A.; Press, Michael F.; Rhodes, Anthony; Sturgeon, Catharine; Taube, Sheila E.; Tubbs, Raymond; Vance, Gail H.; van de Vijver, Marc; Wheeler, Thomas M.; Hayes, Daniel F.

2007-01-01

PURPOSE: To develop a guideline to improve the accuracy of human epidermal growth factor receptor 2 (HER2) testing in invasive breast cancer and its utility as a predictive marker. METHODS: The American Society of Clinical Oncology and the College of American Pathologists convened an expert panel,

American Society for Pain Management Nursing position statement: pain management at the end of life.

Science.gov (United States)

Reynolds, Janice; Drew, Debra; Dunwoody, Colleen

2013-09-01

Pain at the end of life continues to be of great concern as it may be unrecognized or untreated. While nurses have an ethical obligation to reduce suffering at the end of life, barriers remain regarding appropriate and adequate pain management at the end of life. This position statement from the American Society for Pain Management Nursing contains recommendations for nurses, prescribers, and institutions that would improve pain management for this vulnerable population. Copyright © 2013 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

The American Society of Pediatric Hematology/Oncology workforce assessment: Part 1-Current state of the workforce.

Science.gov (United States)

Hord, Jeffrey; Shah, Mona; Badawy, Sherif M; Matthews, Dana; Hilden, Joanne; Wayne, Alan S; Salsberg, Edward; Leavey, Patrick S

2018-02-01

The American Society of Pediatric Hematology/Oncology (ASPHO) recognized recent changes in medical practice and the potential impact on pediatric hematology-oncology (PHO) workforce. ASPHO surveyed society members and PHO Division Directors between 2010 and 2016 and studied PHO workforce data collected by the American Board of Pediatrics and the American Medical Association to characterize the current state of the PHO workforce. The analysis of this information has led to a comprehensive description of PHO physicians, professional activities, and workplace. It is important to continue to collect data to identify changes in composition and needs of the PHO workforce. © 2017 Wiley Periodicals, Inc.

Cermet crucible for metallurgical processing

Science.gov (United States)

Boring, Christopher P.

1995-01-01

A cermet crucible for metallurgically processing metals having high melting points comprising a body consisting essentially of a mixture of calcium oxide and erbium metal, the mixture comprising calcium oxide in a range between about 50 and 90% by weight and erbium metal in a range between about 10 and 50% by weight.

Estimation of metallurgical parameters of flotation process from froth visual features

Directory of Open Access Journals (Sweden)

Mohammad Massinaei

2015-06-01

Full Text Available The estimation of metallurgical parameters of flotation process from froth visual features is the ultimate goal of a machine vision based control system. In this study, a batch flotation system was operated under different process conditions and metallurgical parameters and froth image data were determined simultaneously. Algorithms have been developed for measuring textural and physical froth features from the captured images. The correlation between the froth features and metallurgical parameters was successfully modeled, using artificial neural networks. It has been shown that the performance parameters of flotation process can be accurately estimated from the extracted image features, which is of great importance for developing automatic control systems.

An official American Thoracic Society/European Respiratory Society statement: research questions in COPD

Directory of Open Access Journals (Sweden)

Bartolome R. Celli

2015-06-01

Full Text Available Chronic obstructive pulmonary disease (COPD is a leading cause of morbidity, mortality and resource use worldwide. The goal of this official American Thoracic Society (ATS/European Respiratory Society (ERS Research Statement is to describe evidence related to diagnosis, assessment, and management; identify gaps in knowledge; and make recommendations for future research. It is not intended to provide clinical practice recommendations on COPD diagnosis and management. Clinicians, researchers and patient advocates with expertise in COPD were invited to participate. A literature search of Medline was performed, and studies deemed relevant were selected. The search was not a systematic review of the evidence. Existing evidence was appraised and summarised, and then salient knowledge gaps were identified. Recommendations for research that addresses important gaps in the evidence in all areas of COPD were formulated via discussion and consensus. Great strides have been made in the diagnosis, assessment and management of COPD, as well as understanding its pathogenesis. Despite this, many important questions remain unanswered. This ATS/ERS research statement highlights the types of research that leading clinicians, researchers and patient advocates believe will have the greatest impact on patient-centred outcomes.

Tracking the workforce: the American Society of Clinical Oncology workforce information system.

Science.gov (United States)

Kirkwood, M Kelsey; Kosty, Michael P; Bajorin, Dean F; Bruinooge, Suanna S; Goldstein, Michael A

2013-01-01

In anticipation of oncologist workforce shortages projected as part of a 2007 study, the American Society of Clinical Oncology (ASCO) worked with a contractor to create a workforce information system (WIS) to assemble the latest available data on oncologist supply and cancer incidence and prevalence. ASCO plans to publish findings annually, reporting on new data and tracking trends over time. THE WIS REPORT IS COMPOSED OF THREE SECTIONS: supply, new entrants, and cancer incidence and prevalence. Tabulations of the number of oncologists in the United States are derived mainly from the American Medical Association Physician Masterfile. Information on fellows and residents in the oncology workforce pipeline come from published sources such as Journal of the American Medical Association. Incidence and prevalence estimates are published by the American Cancer Society and National Cancer Institute. The WIS reports a total of 13,084 oncologists working in the United States in 2011. Oncologists are defined as those physicians who designate hematology, hematology/oncology, or medical oncology as their specialty. The WIS compares the characteristics of these oncologists with those of all physicians and tracks emerging trends in the physician training pipeline. Observing characteristics of the oncologist workforce over time allows ASCO to identify, prioritize, and evaluate its workforce initiatives. Accessible figures and reports generated by the WIS can be used by ASCO and others in the oncology community to advocate for needed health care system and policy changes to help offset future workforce shortages.

Tracking the Workforce: The American Society of Clinical Oncology Workforce Information System

Science.gov (United States)

Kirkwood, M. Kelsey; Kosty, Michael P.; Bajorin, Dean F.; Bruinooge, Suanna S.; Goldstein, Michael A.

2013-01-01

Purpose: In anticipation of oncologist workforce shortages projected as part of a 2007 study, the American Society of Clinical Oncology (ASCO) worked with a contractor to create a workforce information system (WIS) to assemble the latest available data on oncologist supply and cancer incidence and prevalence. ASCO plans to publish findings annually, reporting on new data and tracking trends over time. Methods: The WIS report is composed of three sections: supply, new entrants, and cancer incidence and prevalence. Tabulations of the number of oncologists in the United States are derived mainly from the American Medical Association Physician Masterfile. Information on fellows and residents in the oncology workforce pipeline come from published sources such as Journal of the American Medical Association. Incidence and prevalence estimates are published by the American Cancer Society and National Cancer Institute. Results: The WIS reports a total of 13,084 oncologists working in the United States in 2011. Oncologists are defined as those physicians who designate hematology, hematology/oncology, or medical oncology as their specialty. The WIS compares the characteristics of these oncologists with those of all physicians and tracks emerging trends in the physician training pipeline. Conclusion: Observing characteristics of the oncologist workforce over time allows ASCO to identify, prioritize, and evaluate its workforce initiatives. Accessible figures and reports generated by the WIS can be used by ASCO and others in the oncology community to advocate for needed health care system and policy changes to help offset future workforce shortages. PMID:23633965

Kokes Award for the 24th North American Catalysis Society Meeting

Energy Technology Data Exchange (ETDEWEB)

Rioux, Robert M. [Pennsylvania State Univ., University Park, PA (United States)

2016-05-02

The objective of the Richard. J. Kokes Travel Award program is to encourage the participation of students in the biennial North American Catalysis Society (NACS) Meetings. The Kokes Award covers a significant portion of the transportation, lodging, and conference registration costs. Eligible students must be enrolled at a North American university and need to present a paper at the meeting. The Kokes awardee will be required to contribute some time to the organizing committee to assist in meeting operations and to be present at the meeting during the entire time. Similar to the 23rd Kokes Award program, undergraduate students are also eligible for the 24th Kokes Award program.

Study of a metallurgical site in Tuscany (Italy) by radiocarbon dating

International Nuclear Information System (INIS)

Cartocci, A.; Fedi, M.E.; Taccetti, F.; Benvenuti, M.; Chiarantini, L.; Guideri, S.

2007-01-01

Tuscany represents one of the most important ancient mining districts of Italy. Metalworking activities have been present in the area since ancient times and several mining centres have been active in the region since the Etruscan period. Two of the more notable mining locations are the island of Elba and the towns of Populonia and Massa Marittima. In order to reconstruct the development of metallurgical techniques in the past, a multi-disciplinary approach is required, involving both archaeological study and archaeometric analysis of the sites of interest. One of the most complex problems is establishing the chronological history of metallurgical exploitation in ancient sites: archaeological remains are sometimes incomplete and the stratigraphy of archaeological horizons might have been deeply altered. Thus, direct dating of metallurgical slags and other remains of mining and metalworking activities using radiocarbon measurements is particularly useful for developing site chronologies. Charcoal samples from a recent excavation in Populonia were dated by AMS radiocarbon in order to reconstruct the chronological evolution of ancient metallurgical production; results reported here are consistent with archaeological observations

Study of a metallurgical site in Tuscany (Italy) by radiocarbon dating

Energy Technology Data Exchange (ETDEWEB)

Cartocci, A. [Dipartimento di Fisica dell' Universita e I.N.F.N. Sezione di Firenze, via Sansone 1, 50019 Sesto Fiorentino, Florence (Italy); Fedi, M.E. [Dipartimento di Fisica dell' Universita e I.N.F.N. Sezione di Firenze, via Sansone 1, 50019 Sesto Fiorentino, Florence (Italy)]. E-mail: fedi@fi.infn.it; Taccetti, F. [Dipartimento di Fisica dell' Universita e I.N.F.N. Sezione di Firenze, via Sansone 1, 50019 Sesto Fiorentino, Florence (Italy); Benvenuti, M. [Dipartimento di Scienze della Terra dell' Universita di Firenze, via La Pira 4, 50121 Florence (Italy); Chiarantini, L. [Dipartimento di Scienze della Terra dell' Universita di Firenze, via La Pira 4, 50121 Florence (Italy); Guideri, S. [Societa Parchi Val di Cornia S.p.a., via G. Lerario, Piombino, Livorno (Italy)

2007-06-15

Tuscany represents one of the most important ancient mining districts of Italy. Metalworking activities have been present in the area since ancient times and several mining centres have been active in the region since the Etruscan period. Two of the more notable mining locations are the island of Elba and the towns of Populonia and Massa Marittima. In order to reconstruct the development of metallurgical techniques in the past, a multi-disciplinary approach is required, involving both archaeological study and archaeometric analysis of the sites of interest. One of the most complex problems is establishing the chronological history of metallurgical exploitation in ancient sites: archaeological remains are sometimes incomplete and the stratigraphy of archaeological horizons might have been deeply altered. Thus, direct dating of metallurgical slags and other remains of mining and metalworking activities using radiocarbon measurements is particularly useful for developing site chronologies. Charcoal samples from a recent excavation in Populonia were dated by AMS radiocarbon in order to reconstruct the chronological evolution of ancient metallurgical production; results reported here are consistent with archaeological observations.

Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter

CERN Document Server

Shock Waves in Condensed Matter

1986-01-01

The Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter was held in Spokane, Washington, July 22-25, 1985. Two hundred and fifty scientists and engineers representing thirteen countries registered at the conference. The countries represented included the United States of America, Australia, Canada, The People's Repub­ lic of China, France, India, Israel, Japan, Republic of China (Taiwan), United Kingdom, U. S. S. R, Switzerland and West Germany. One hundred and sixty-two technical papers, cov­ ering recent developments in shock wave and high pressure physics, were presented. All of the abstracts have been published in the September 1985 issue of the Bulletin of the American Physical Society. The topical conferences, held every two years since 1979, have become the principal forum for shock wave studies in condensed materials. Both formal and informal technical discussions regarding recent developments conveyed a sense of excitement. Consistent with the past conferences, th...

ACC/AATS/AHA/ASE/ASNC/SCAI/SCCT/STS 2016 Appropriate Use Criteria for Coronary Revascularization in Patients With Acute Coronary Syndromes : A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, and the Society of Thoracic Surgeons.

Science.gov (United States)

Patel, Manesh R; Calhoon, John H; Dehmer, Gregory J; Grantham, James Aaron; Maddox, Thomas M; Maron, David J; Smith, Peter K

2017-04-01

The American College of Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Thoracic Surgeons, and American Association for Thoracic Surgery, along with key specialty and subspecialty societies, have completed a 2-part revision of the appropriate use criteria (AUC) for coronary revascularization. In prior coronary revascularization AUC documents, indications for revascularization in acute coronary syndromes (ACS) and stable ischemic heart disease were combined into 1 document. To address the expanding clinical indications for coronary revascularization, and in an effort to align the subject matter with the most current American College of Cardiology/American Heart Association guidelines, the new AUC for coronary artery revascularization were separated into 2 documents addressing ACS and stable ischemic heart disease individually. This document presents the AUC for ACS. Clinical scenarios were developed to mimic patient presentations encountered in everyday practice and included information on symptom status, presence of clinical instability or ongoing ischemic symptoms, prior reperfusion therapy, risk level as assessed by noninvasive testing, fractional flow reserve testing, and coronary anatomy. This update provides a reassessment of clinical scenarios that the writing group felt to be affected by significant changes in the medical literature or gaps from prior criteria. The methodology used in this update is similar to the initial document but employs the recent modifications in the methods for developing AUC, most notably, alterations in the nomenclature for appropriate use categorization. A separate, independent rating panel scored the clinical scenarios on a scale of 1 to 9. Scores of 7 to 9 indicate that revascularization is considered appropriate for the clinical scenario presented. Scores of 1 to 3 indicate that revascularization is considered rarely appropriate for the clinical scenario, whereas scores in the mid-range (4 to 6

Ethno-Religiosity in Orthodox Christianity: A Source of Solidarity & Multiculturalism in American Society

Directory of Open Access Journals (Sweden)

Chris Durante

2015-03-01

Full Text Available This study will analyze the processes of community organization implemented by Eastern Orthodox Christian ethno-religious groups, and Greek Orthodox Christian communities in particular, to establish themselves in American civil society. It will be argued that the symbiotic relationship formed between ethnicity and religion in this tradition, as well as the democratized grassroots mode of community organization that American civil society fosters, contributes to a strong sense of belonging amongst members of the ethno-religious Orthodox Christian congregations. In turn, this sense of belonging has produced a multi-layered mechanism for solidarity-building in these communities. It will then be suggested that in addition to contributing to America’s religious diversity, the preservation of ethno-linguistic heritage by the various Orthodox Christian churches simultaneously contributes to America’s poly-ethnicity and linguistic diversity as well. Last, it will be argued that the continued survival of ethno-religiosity in American Orthodoxy can either lead to further isolation amongst the separate ethnic congregations, or it can alternatively open avenues for the cultivation of a form of Orthodox Christian multiculturalism that supports neither homogeneity nor isolationism.

Defining refractory migraine: results of the RHSIS Survey of American Headache Society members.

Science.gov (United States)

Schulman, Elliott A; Peterlin, B Lee; Lake, Alvin E; Lipton, Richard B; Hanlon, Alexandra; Siegel, Sherry; Levin, Morris; Goadsby, Peter J; Markley, Herbert G

2009-04-01

To gauge consensus regarding a proposed definition for refractory migraine proposed by Refractory Headache Special Interest Section, and where its use would be most appropriate. Headache experts have long recognized that a subgroup of headache sufferers remains refractory to treatment. Although different groups have proposed criteria to define refractory migraine, the definition remains controversial. The Refractory Headache Special Interest Section of the American Headache Society developed a definition through a consensus process, assisted by a literature review and initial membership survey. A 12-item questionnaire was distributed at the American Headache Society meeting in 2007 during a platform session and at the Refractory Headache Special Interest Section symposium. The same questionnaire was subsequently sent to all American Headache Society members via e-mail. A total of 151 responses from AHS members form the basis of this report. The survey instrument was designed using Survey Monkey. Frequencies and percentages of the survey were used to describe survey responses. American Headache Society members agreed that a definition for refractory migraine is needed (91%) that it should be added to the International Classification of Headache Disorders-2 (86%), and that refractory forms of non-migraine headache disorders should be defined (87%). Responders believed a refractory migraine definition would be of greatest value in selecting patients for clinical drug trials. The current refractory migraine definition requires a diagnosis of migraine, interference with function or quality of life despite modification of lifestyle factors, and adequate trials of acute and preventive medicines with established efficacy. The proposed criteria for the refractory migraine definition require failing 2 preventive medications to meet the threshold for failure. Although 42% of respondents agreed with the working definition of refractory migraine, 43% favored increasing the

TMI-2 Vessel Investigation Project Metallurgical Program

International Nuclear Information System (INIS)

Diercks, D.R.; Neimark, L.A.

1990-01-01

The TMI-2 [Three Mile Island unit 2] Vessel Investigation Project Metallurgical Program at Argonne National Laboratory is a part of the international TMI-2 Vessel Investigation Project being conducted jointly by the U.S. Nuclear Regulatory Commission and the Organization for Economic Co-operation and Development (OECD). The overall project consists of three phases, namely (1) recovery of material samples from the lower head of the TMI-2 reactor, (2) examination and analysis of the lower head samples and the preparation and testing of archive material subjected to a similar thermal history, and (3) procurement, examination, and analysis of companion core material located adjacent to or near the lower head material. The specific objectives of the ANL Metallurgical Program, which accounts for a major portion of Phase 2, are to prepare metallographic and mechanical test specimen blanks from the TMI-2 lower head material, prepare similar test specimen blanks from suitable archive material subjected to the appropriate thermal processing, determine the mechanical properties of the lower vessel head and archive materials under the conditions of the core-melt accident, and assess the lower head integrity and margin-to-failure during the accident. The ANL work consists of three tasks: (1) archive materials program, (2) fabrication of metallurgical and mechanical test specimens from the TMI-2 pressure vessel samples, and (3) mechanical property characterization of TMI-2 lower pressure vessel head and archive material

ORNL evaluation of the ORR-PSF metallurgical experiment and blind test

International Nuclear Information System (INIS)

Stallmann, F.W.

1984-01-01

A methodology is described to evaluate the dosimetry and metallurgical data from the two-year ORR-PSF metallurgical irradiation experiment. The first step is to obtain a three-dimensional map of damage exposure parameter values based on neutron transport calculations and dosimetry measurements which are obtained by means of the LSL-M2 adjustment procedure. Metallurgical test data are then combined with damage parameter, temperature, and chemistry information to determine the correlation between radiation and steel embrittlement in reactor pressure vessels including estimates for the uncertainties. Statistical procedures for the evaluation of Charpy data, developed earlier, are used for this investigation. The data obtained in this investigation provide a benchmark against which the predictions of the PSF Blind Test can be compared. The results of this investigation and the Blind Test comparison are discussed

Energy conservation and efficiency in Giprokoks designs at Ukrainian ferrous-metallurgical enterprises

Energy Technology Data Exchange (ETDEWEB)

M.I. Fal' kov [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15

Energy conditions at Ukrainian ferrous-metallurgical enterprises are analyzed. Measures to boost energy conservation and energy efficiency are proposed: specifically, the introduction of systems for dry slaking of coke; and steam-gas turbines that employ coke-oven gas or a mixture of gases produced at metallurgical enterprises. Such turbines may be built from Ukrainian components.

Utilisation of metallurgical by-products in road construction in the Czech Republic

Science.gov (United States)

Kresta, František

2017-09-01

Metallurgical by-products, primarily blast furnace slag and steel slag, have ranked among important alternative sources of fill as well as of material for the structural layers in highways. Main hazards of metallurgical by-products are closely connected to their chemical and mineralogical composition and they can be resulted in volume changes. Fears from possible deformations similar to the D47 motorway meant that metallurgical by-products were excluded from several public tenders of road construction. Comparison of blast furnace slag, steel slag and other metallurgical by products parameters allow us to define the most hazardous material as steelworks waste. Linear swelling of steelwork waste achieves more than 40% at 75°C and swelling pressure was higher than 1.5 MPa. Compositional heterogeneity of steelworks waste makes it difficult to establish the long-term behaviour of this material. At the present time we cannot ascertain which maximum values can be reached by deformation and what are the swelling pressures acting on the material while the volume changes are in progress.

Cyril Stanley Smith's Translations of Metallurgical Classics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 6. Cyril Stanley Smith's Translations of Metallurgical Classics. Martha Goodway. General Article Volume 11 Issue 6 June 2006 pp 63-66. Fulltext. Click here to view fulltext PDF. Permanent link:

18th Middle Atlantic Regional Meeting, American Chemical Society

International Nuclear Information System (INIS)

Anon.

1985-01-01

The Proceedings of the 18th Middle Atlantic Regional Meeting of the American Chemical Society held May 21-23, 1984, include information about the meeting, e.g. area map and list of exhibitors, and abstracts for most of the 397 papers. A few papers are only title listed. The papers are arranged into sections dealing with analytical chemistry, biochemistry, chemical education, environmental chemistry, fuel chemistry, history of chemistry, industrial and engineering chemistry, inorganic chemistry, photochemistry, physical chemistry, polymer chemistry, and polymeric materials. Sections are also included to highlight undergraduate research and papers by chemical technicians and younger chemists. Separate abstracts have been prepared for 36 papers

Metallurgical Evaluation of the Five-Inch Cylindrical Induction Melter

International Nuclear Information System (INIS)

Imrich, K.J.

2000-01-01

A metallurgical evaluation of the 5-inch cylindrical induction melter (CIM) vessel was performed by the Materials Technology Section to evaluate the metallurgical condition after operating for approximately 375 hours at 1400 to 1500 Degrees Celsius during a 2 year period. Results indicate that wall thinning and significant grain growth occurred in the lower portion of the conical section and the drain tube. No through-wall penetrations were found in the cylindrical and conical sections of the CIM vessel and only one leak site was identified in the drain tube. Failure of the drain tube was associated with a localized over heating and intercrystalline fracture

Standardized Competencies for Parenteral Nutrition Prescribing: The American Society for Parenteral and Enteral Nutrition Model.

Science.gov (United States)

Guenter, Peggi; Boullata, Joseph I; Ayers, Phil; Gervasio, Jane; Malone, Ainsley; Raymond, Erica; Holcombe, Beverly; Kraft, Michael; Sacks, Gordon; Seres, David

2015-08-01

Parenteral nutrition (PN) provision is complex, as it is a high-alert medication and prone to a variety of potential errors. With changes in clinical practice models and recent federal rulings, the number of PN prescribers may be increasing. Safe prescribing of this therapy requires that competency for prescribers from all disciplines be demonstrated using a standardized process. A standardized model for PN prescribing competency is proposed based on a competency framework, the American Society for Parenteral and Enteral Nutrition (A.S.P.E.N.)-published interdisciplinary core competencies, safe practice recommendations, and clinical guidelines. This framework will guide institutions and agencies in developing and maintaining competency for safe PN prescription by their staff. © 2015 American Society for Parenteral and Enteral Nutrition.

TMI-2 Vessel Investigation Project (VIP) Metallurgical Program

International Nuclear Information System (INIS)

Diercks, D.R.; Neimark, L.A.

1990-06-01

The TMI-2 Vessel Investigation Project (VIP) Metallurgical Program is a part of the international TMI-2 Vessel Investigation Project being conducting jointly by the US Nuclear Regulatory Commission and the Organization for Economic Co-operation and Development (OECD). The overall project consists of three phases, namely (1) recovery of material samples from the lower head of the TMI-2 reactor, (2) examination and analysis of the lower head samples and the preparation and testing of archive material subjected to a similar thermal history, and (3) procurement, examination, and analysis of companion core material located adjacent to or near the lower head material. The specific objectives of the ANL Metallurgical Program, which comprises a major portion of Phase 2, are to prepare metallographic and mechanical test specimen blanks from the TMI-2 lower head material, prepare similar test specimen blanks from suitable archive material subjected to the appropriate thermal processing, determine the mechanical properties of the lower vessel head and archive materials under the conditions of the core-melt accident, and assess the lower head integrity and margin-to-failure during the accident. The ANL work consists of three tasks: (1) archive materials program, (2) fabrication of metallurgical and mechanical test specimens from the TMI-2 pressure vessel samples, and (3) mechanical property characterization of TMI-2 lower pressure vessel head and archive material

Metallurgical plasma torches

International Nuclear Information System (INIS)

Shapovalov, V.A.; Latash, Yu.V.

2000-01-01

The technological equipment for the plasma heating of metals, plasma melting and plasma treatment of the surface is usually developed on the basis of are plasma torches using direct or alternating current. The reasons which partly restrict the industrial application of the plasma torches are the relatively short service life of the electrode (cathode) on which the arc is supported, and the contamination of the treated metal with the products of failure of the electrode. The aim of this work was to determine the reasons for the occurrence of negative phenomena observed in the process of service of plasma torches, and propose suitable approaches to the design of metallurgical plasma torches characterised by a long service life

Supercritical water oxidation benchscale testing metallurgical analysis report

International Nuclear Information System (INIS)

Norby, B.C.

1993-02-01

This report describes metallurgical evaluation of witness wires from a series of tests using supercritical water oxidation (SCWO) to process cutting oil containing a simulated radionuclide. The goal of the tests was to evaluate the technology's ability to process a highly chlorinated waste representative of many mixed waste streams generated in the DOE complex. The testing was conducted with a bench-scale SCWO system developed by the Modell Development Corporation. Significant test objectives included process optimization for adequate destruction efficiency, tracking the radionuclide simulant and certain metals in the effluent streams, and assessment of reactor material degradation resulting from processing a highly chlorinated waste. The metallurgical evaluation described herein includes results of metallographic analysis and Scanning Electron Microscopy analysis of witness wires exposed to the SCWO environment for one test series

History of atomic layer deposition and its relationship with the American Vacuum Society

NARCIS (Netherlands)

Parsons, G.N.; Elam, J.W.; George, S.M.; Haukka, S.; Jeon, H.; Kessels, W.M.M.; Leskelä, M.; Poodt, P.; Ritala, M.; Rossnagel, S.M.

2013-01-01

This article explores the history of atomic layer deposition (ALD) and its relationship with the American Vacuum Society (AVS). The authors describe the origin and history of ALD science in the 1960s and 1970s. They also report on how the science and technology of ALD progressed through the 1990s

Towards Representative Metallurgical Sampling and Gold Recovery Testwork Programmes

Directory of Open Access Journals (Sweden)

Simon C. Dominy

2018-05-01

Full Text Available When developing a process flowsheet, the risks in achieving positive financial outcomes are minimised by ensuring representative metallurgical samples and high quality testwork. The quality and type of samples used are as important as the testwork itself. The key characteristic required of any set of samples is that they represent a given domain and quantify its variability. There are those who think that stating a sample(s is representative makes it representative without justification. There is a need to consider both (1 in-situ and (2 testwork sub-sample representativity. Early ore/waste characterisation and domain definition are required, so that sampling and testwork protocols can be designed to suit the style of mineralisation in question. The Theory of Sampling (TOS provides an insight into the causes and magnitude of errors that may occur during the sampling of particulate materials (e.g., broken rock and is wholly applicable to metallurgical sampling. Quality assurance/quality control (QAQC is critical throughout all programmes. Metallurgical sampling and testwork should be fully integrated into geometallurgical studies. Traditional metallurgical testwork is critical for plant design and is an inherent part of geometallurgy. In a geometallurgical study, multiple spatially distributed small-scale tests are used as proxies for process parameters. These will be validated against traditional testwork results. This paper focusses on sampling and testwork for gold recovery determination. It aims to provide the reader with the background to move towards the design, implementation and reporting of representative and fit-for-purpose sampling and testwork programmes. While the paper does not intend to provide a definitive commentary, it critically assesses the hard-rock sampling methods used and their optimal collection and preparation. The need for representative sampling and quality testwork to avoid financial and intangible losses is

LWR surveillance dosimetry improvement program: PSF metallurgical blind test results

International Nuclear Information System (INIS)

Kam, F.B.K.; Maerker, R.E.; Stallmann, F.W.

1984-01-01

The metallurgical irradiation experiment at the Oak Ridge Research Reactor Poolside Facility (ORR-PSF) was designed as a benchmark to test the accuracy of radiation embrittlement predictions in the pressure vessel wall of light water reactors on the basis of results from surveillance capsules. The PSF metallurgical Blind Test is concerned with the simulated surveillance capsule (SSC) and the simulated pressure vessel capsule (SPVC). The data from the ORR-PSF benchmark experiment are the basis for comparison with the predictions made by participants of the metallurgical ''Blind Test''. The Blind Test required the participants to predict the embrittlement of the irradiated specimen based only on dosimetry and metallurgical data from the SSC1 capsule. This exercise included both the prediction of damage fluence and the prediction of embrittlement based on the predicted fluence. A variety of prediction methodologies was used by the participants. No glaring biases or other deficiencies were found, but neither were any of the methods clearly superior to the others. Closer analysis shows a rather complex and poorly understood relation between fluence and material damage. Many prediction formulas can give an adequate approximation, but further improvement of the prediction methodology is unlikely at this time given the many unknown factors. Instead, attention should be focused on determining realistic uncertainties for the predicted material changes. The Blind Test comparisons provide some clues for the size of these uncertainties. In particular, higher uncertainties must be assigned to materials whose chemical composition lies outside the data set for which the prediction formula was obtained. 16 references, 14 figures, 5 tables

Bankruptcy risk forecasting for the metallurgical branch in Romania

Directory of Open Access Journals (Sweden)

P. R. Răchişan

2014-07-01

Full Text Available All investment decisions require a thorough analysis of the retrospective evolution of the entities from the concerned area, in order to estimate the long-term evolution perspectives. In this context, the present study analyzes the evolution of the entities from the Romanian metallurgical sector based on the accounting and financial information published for the period 2008 - 2012 and, in fact, it justifies the situation from the perspective of users (managers, investors, auditors and of the economic environment specific to Romania. Starting from this premise we created a regression model particularly useful in forecasting the evolution of the ability to deal with debt for the entities from the Romanian metallurgical sector.

Elaboration and characterization of metallurgical silicon for photovoltaic applications

International Nuclear Information System (INIS)

Barbouche, M; Hajji, M; Krout, F; Ezzaouia, H

2015-01-01

There is a small quantity of participants in the global market of silicon, mainly from the developed countries. It should be noticed also that production of metallurgical silicon Mg-Si is among the most important steps to produce solar grade silicon and photovoltaic panels. Therefore, in this paper we focused on the growth of Mg-Si by carbothermal reduction of silica. An investigation was made using FT-IR characterization to study the effect of process conditions (temperature, atmosphere, duration) in Mg-Si production. Raman spectroscopy was used to investigate the produced Mg-Si. Based on these results, we established a pilot line production of metallurgical silicon at the 'CRTEn' in Tunisia

TMI-2 Vessel Investigation Project (VIP) Metallurgical Program

International Nuclear Information System (INIS)

Diercks, D.R.; Neimark, L.A.

1991-01-01

The Three Mile Island Unite 2 (TMI-2) Vessel Investigation Project Metallurgical Program is a part of the international TMI-2 Vessel Investigation Project being conducted jointly by the U.S. Nuclear Regulatory Commission and the Organization for Economic Cooperation and Development. The objectives of the metallurgical program are to deduce the temperatures of, determine the mechanical properties of, and assess the integrity of the TMI-2 lower head during the loss-of-coolant accident. Fifteen samples have been removed from the lower head and are being examined. In addition, archive material from the lower head of the Midland nuclear reactor has been procured for conducting supplemental metallurgical evaluations and mechanical property determinations. Evaluations of the microstructure and mechanical properties of the as-received archive material have been completed, and a series of heat treatment experiments has been conducted to develop standard microstructures to be compared with those present in the TMI-2 samples. Results have been obtained from examinations of two of the fifteen TMI-2 lower head samples. These results indicate that one of these two samples, which contained cracks in the weld cladding extending ∼3 mm into the underlying base metal, apparently reached temperatures on the order of 1000 to 1100C during the accident. A preliminary examination of the core debris deposited on this sample has been performed. The other sample, from an area away from the region of core relocation, did not exceed 727C during the accident

Metallurgical applications: fractography

International Nuclear Information System (INIS)

Meny, L.

1978-01-01

The principal metallurgical uses of the scanning electron microscope and the microprobe described here employ images obtained on a CRT from an electron signal or X rays. The various electron signals are the back scattered electrons, secondary electrons and absorbed electrons. The differences in the intensity of thee signals with the acceleration tension E 0 , the inclination angle β, the atomic number Z of the target and any potential applied to the sample give rise to contrasts: atomic number contrast, given by the sample current or the back scattered electrons; topographical contrast, given by the emission of the secondary electrons Δ that vary with α (the angle between the normal to the surface and the direction of the incident beam) [fr

Full-text publication of abstracts presented at meetings of a Latin American scientific society.

Science.gov (United States)

Dicembrino, Manuela; Anderson, Mariana; Vely, Ana Gabriela; Ossorio, María Fabiana; Ferrero, Fernando

2014-12-01

To estimate the proportion of abstracts presented at meetings of the Latin American Society for Pediatric Research that are fully-published, to describe the reasons for not publishing papers, and to assess the impact of funding on the publication rate. Abstracts presented at meetings held between 2005 and 2009 were included. Authors were contacted and invited to take a survey on the publication of their work or the reasons not to do it. Information was collected on 232 (71.4%) of the 325 abstracts presented. Of these, 58.6% were fully-published (136/232). Funded studies (40.0%) had more chances of publication (OR: 2.2; 95% CI: 1.2-3.9). "Lack of time" was the most common reason for failure to publish (35/96). 58.6% of abstracts presented at meetings of the Latin American Society for Pediatric Research, were published as full-text articles; lack of time was the most common reason for failure to publish. Funded research had more chances of being published.

Fuel for domestic and metallurgical uses

Energy Technology Data Exchange (ETDEWEB)

Basu, D.; Chakrabarti, R.K.

1981-02-01

To meet the energy requirements in the domestic and metallurgical sectors CMPDI have taken in hand some developmental projects using coal as a feedback. 4 projects are described - mechanized conversion of coal to domestic coke, formed coke making by Didier-Keihan-Sumitomo process, domestic briquette making based on non-copking coal resources, and smokeless coal blocks utilising inferior grade raw coal and washery by-products.

Development of market strategies of metallurgical enterrprises after restructuring of steel industry

Directory of Open Access Journals (Sweden)

B. Gajdzik

2014-01-01

Full Text Available Before metallurgical enterprises started implementation of marketing activities they had to go through restructuring processes which included all areas of their market activities. Privatised metallurgical enterprises after economic transformation gradually implemented marketing to their business activities. The article presents notions connected with development of marketing strategies from the period of last 20 years. The range of analysis includes categories corresponding with instruments of mix marketing (4P − product, price, place, promotion.

Shared Decision Making in ICUs: An American College of Critical Care Medicine and American Thoracic Society Policy Statement.

Science.gov (United States)

Kon, Alexander A; Davidson, Judy E; Morrison, Wynne; Danis, Marion; White, Douglas B

2016-01-01

Shared decision making is endorsed by critical care organizations; however, there remains confusion about what shared decision making is, when it should be used, and approaches to promote partnerships in treatment decisions. The purpose of this statement is to define shared decision making, recommend when shared decision making should be used, identify the range of ethically acceptable decision-making models, and present important communication skills. The American College of Critical Care Medicine and American Thoracic Society Ethics Committees reviewed empirical research and normative analyses published in peer-reviewed journals to generate recommendations. Recommendations approved by consensus of the full Ethics Committees of American College of Critical Care Medicine and American Thoracic Society were included in the statement. Six recommendations were endorsed: 1) DEFINITION: Shared decision making is a collaborative process that allows patients, or their surrogates, and clinicians to make healthcare decisions together, taking into account the best scientific evidence available, as well as the patient's values, goals, and preferences. 2) Clinicians should engage in a shared decision making process to define overall goals of care (including decisions regarding limiting or withdrawing life-prolonging interventions) and when making major treatment decisions that may be affected by personal values, goals, and preferences. 3) Clinicians should use as their "default" approach a shared decision making process that includes three main elements: information exchange, deliberation, and making a treatment decision. 4) A wide range of decision-making approaches are ethically supportable, including patient- or surrogate-directed and clinician-directed models. Clinicians should tailor the decision-making process based on the preferences of the patient or surrogate. 5) Clinicians should be trained in communication skills. 6) Research is needed to evaluate decision

Proceedings of papers. 3. Balkan Metallurgical Conference; Kniga na trudovi. 3-ta Balkanska konferencija na metalurzite

Energy Technology Data Exchange (ETDEWEB)

Mickovski, Jovan [Faculty of Technology and Metallurgy, St. ' Cyril and Methodius' University, Skopje (Macedonia, The Former Yugoslav Republic of)

2003-07-01

This Conference aims to be a central event in the metallurgy research of Balkan, fulfilling the goals to present the most outstanding relevant developments in modern metallurgy; to inspire high standards of excellence in pure and applied metallurgy research; to attract outstanding scientists to present central lectures on modem metallurgical research, and on the challenges imposed by the needs of society; to inspire the young generation of metallurgists in Balkan and other countries. Following these lines, the 3. Balkan Conference on Metallurgy will provide a unique opportunity for academic and industrial metallurgists from the Balkan countries and wider, to exchange ideas, expertise, and experience on topics related to the theme of the Conference - Balkan Metallurgy in Search for New Ways of Development. The aim of the organizers was to bring together distinguished experts, not only to present their work, but also to discuss the major scientific and technological challenges facing metallurgy in this millennium.The 6 sections of the conference were entitled: Section A: Extractive metallurgy; Section B: Physical metallurgy and materials science - ferrous metals and non ferrous metals; Section C: Management, maintenance control and optimization of metallurgical processes; Section D: New technologies and techniques; Section E: Refractory and powder; Section F: Corrosion and protection of metals. Papers relevant to INIS are indexed separately.

Investigation of metallurgical coatings for automotive applications

Science.gov (United States)

Su, Jun Feng

Metallurgical coatings have been widely used in the automotive industry from component machining, engine daily running to body decoration due to their high hardness, wear resistance, corrosion resistance and low friction coefficient. With high demands in energy saving, weight reduction and limiting environmental impact, the use of new materials such as light Aluminum/magnesium alloys with high strength-weight ratio for engine block and advanced high-strength steel (AHSS) with better performance in crash energy management for die stamping, are increasing. However, challenges are emerging when these new materials are applied such as the wear of the relative soft light alloys and machining tools for hard AHSS. The protective metallurgical coatings are the best option to profit from these new materials' advantages without altering largely in mass production equipments, machinery, tools and human labor. In this dissertation, a plasma electrolytic oxidation (PEO) coating processing on aluminum alloys was introduced in engine cylinder bores to resist wear and corrosion. The tribological behavior of the PEO coatings under boundary and starve lubrication conditions was studied experimentally and numerically for the first time. Experimental results of the PEO coating demonstrated prominent wear resistance and low friction, taking into account the extreme working conditions. The numerical elastohydrodynamic lubrication (EHL) and asperity contact based tribological study also showed a promising approach on designing low friction and high wear resistant PEO coatings. Other than the fabrication of the new coatings, a novel coating evaluation methodology, namely, inclined impact sliding tester was presented in the second part of this dissertation. This methodology has been developed and applied in testing and analyzing physical vapor deposition (PVD)/ chemical vapor deposition (CVD)/PEO coatings. Failure mechanisms of these common metallurgical hard coatings were systematically

American Society of Clinical Oncology/College Of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer.

NARCIS (Netherlands)

Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

2010-01-01

PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

American Society of Clinical Oncology/College of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer.

NARCIS (Netherlands)

Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

2010-01-01

PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

Electronic nicotine delivery systems: a policy statement from the American Association for Cancer Research and the American Society of Clinical Oncology.

Science.gov (United States)

Brandon, Thomas H; Goniewicz, Maciej L; Hanna, Nasser H; Hatsukami, Dorothy K; Herbst, Roy S; Hobin, Jennifer A; Ostroff, Jamie S; Shields, Peter G; Toll, Benjamin A; Tyne, Courtney A; Viswanath, Kasisomayajula; Warren, Graham W

2015-02-01

Combustible tobacco use remains the number one preventable cause of disease, disability, and death in the United States. Electronic nicotine delivery systems (ENDS), which include e-cigarettes, are devices capable of delivering nicotine in an aerosolized form. ENDS use by both adults and youth has increased rapidly, and some have advocated these products could serve as harm-reduction devices and smoking cessation aids. ENDS may be beneficial if they reduce smoking rates or prevent or reduce the known adverse health effects of smoking. However, ENDS may also be harmful, particularly to youth, if they increase the likelihood that nonsmokers or formers smokers will use combustible tobacco products or if they discourage smokers from quitting. The American Association for Cancer Research (AACR) and the American Society of Clinical Oncology (ASCO) recognize the potential ENDS have to alter patterns of tobacco use and affect the public's health; however, definitive data are lacking. AACR and ASCO recommend additional research on these devices, including assessing the health impacts of ENDS, understanding patterns of ENDS use, and determining what role ENDS have in cessation. Key policy recommendations include supporting federal, state, and local regulation of ENDS; requiring manufacturers to register with the FDA and report all product ingredients, requiring childproof caps on ENDS liquids, and including warning labels on products and their advertisements; prohibiting youth-oriented marketing and sales; prohibiting child-friendly ENDS flavors; and prohibiting ENDS use in places where cigarette smoking is prohibited. ©2015 American Association for Cancer Research and American Society of Clinical Oncology.

Utilization of secondary energy resources of metallurgical ...

African Journals Online (AJOL)

... with a heat output of 4200 kW, a working agent R 600, a source of low-potential heat-circulating water: a 460 kW gas engine. The proposed scheme showed high efficiency of power supply of the town in comparison with the gas boiler. Keywords: heat pump; internal combustion engine metallurgical plant; energy efficiency ...

Recognition of American Physiological Society Members Whose Research Publications Had a Significant Impact on the Discipline of Physiology

Science.gov (United States)

Tipton, Charles M.

2013-01-01

Society members whose research publication during the past 125 yr had an important impact on the discipline of physiology were featured at the American Physiological Society (APS)'s 125th Anniversary symposium. The daunting and challenging task of identifying and selecting significant publications was assumed by the Steering Committee of the…

Safety performance indicators in the metallurgical industry using WEB programming

Directory of Open Access Journals (Sweden)

M. Cioca

2017-01-01

Full Text Available Sustainable development has a significant impact today in Romania and worldwide. In this context, risk assessment becomes mandatory for enterprises. This paper analyzes the situation of occupational risks in the metallurgical industry in the European Union, Romania, and the United States and highlights the main causes for work accidents in Romanian metallurgical industry. The analysis covers the period 2010 - 2016. The data collected from Romania is compared to the data related to the European Union and the United States. Moreover, the paper aims to present an occupational risk assessment tool, which is customizable for each area of activity. The last section of the paper discusses the research results and limitations.

The impact of production capacity utilization on metallurgical companies financing

Directory of Open Access Journals (Sweden)

J. Kutáč

2013-01-01

Full Text Available The most important and the most problematic in-house sources of financing of metallurgical companies are profit and depreciations. In the event that the aggregate value of the economic result and depreciations goes over to negative values, then this kind of in-house financing ceases to increase Cash Flow of the company but, on the contrary, it will cause its reduction. It means that this type of financing is to some extent uncertain, particularly in times of crisis, when there are noticeable fluctuations in sales volumes, leading to a significant influence of the volume of production on the amount of profit. The article discusses the impact of production capacity utilization on metallurgical companies financing.

Respiratory health equality in the United States. The American thoracic society perspective.

Science.gov (United States)

Celedón, Juan C; Roman, Jesse; Schraufnagel, Dean E; Thomas, Alvin; Samet, Jonathan

2014-05-01

Because the frequency of major risk factors for respiratory diseases (e.g., tobacco use) differs across demographic groups (defined by socioeconomic status, race/ethnicity, sexual orientation, health care access, occupation, or other characteristics), health disparities are commonly encountered in pediatric and adult pulmonary, critical care, and sleep medicine. As part of its policy on respiratory health disparities, the American Thoracic Society (ATS) Executive Committee created a Health Equality Subcommittee of the Health Policy Committee, with an initial mandate of defining respiratory health equality and, as a subsequent task, providing recommendations to the ATS leadership as to how our society may help attain such equality in the United States. After receiving input from the ATS assemblies and committees, the subcommittee developed this document on respiratory health equality. This document defines respiratory health disparities and respiratory health equality, and expands on a recent ATS and European Respiratory Society policy statement on disparities in respiratory health. Attainment of respiratory health equality requires the ending of respiratory health disparities, which can be achieved only through multidisciplinary efforts to eliminate detrimental environmental exposures while promoting a healthy lifestyle, implementing all components of high-quality health care (prevention, screening, diagnosis, and treatment), and conducting research that will lead to better prevention and management of respiratory diseases for everyone. The ATS recognizes that such efforts must include all stakeholders: members of society at large, governmental and nongovernmental organizations, and other professional societies. The ATS urges all of its members and those of sister societies to work to achieve this laudable goal.

Comparison of Metallurgical and Ultrasonic Inspections of Galvanized Steel Resistance Spot Welds

International Nuclear Information System (INIS)

Potter, Timothy J.; Ghaffari, Bita; Mozurkewich, George; Reverdy, Frederic; Hopkins, Deborah

2006-01-01

Metallurgical examination of galvanized steel resistance spot welds was used to gauge the capabilities of two ultrasonic, non-destructive, scanning techniques. One method utilized the amplitude of the echo from the weld faying surface, while the other used the spectral content of the echo train to map the fused area. The specimens were subsequently sectioned and etched, to distinguish the fused, zinc-brazed, and non-fused areas. The spectral maps better matched the metallurgical maps, while the interface-amplitude method consistently overestimated the weld size

Retail optimization in Romanian metallurgical industry by applying of fuzzy networks concept

Directory of Open Access Journals (Sweden)

Ioana Adrian

2017-01-01

Full Text Available Our article presents possibilities of applying the concept Fuzzy Networks for an efficient metallurgical industry in Romania. We also present and analyze Fuzzy Networks complementary concepts, such as Expert Systems (ES, Enterprise Resource Planning (ERP, Analytics and Intelligent Strategies (SAI. The main results of our article are based on a case study of the possibilities of applying these concepts in metallurgy through Fuzzy Networks. Also, it is presented a case study on the application of the FUZZY concept on the Romanian metallurgical industry.

The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines-Anticoagulation During Cardiopulmonary Bypass.

Science.gov (United States)

Shore-Lesserson, Linda; Baker, Robert A; Ferraris, Victor A; Greilich, Philip E; Fitzgerald, David; Roman, Philip; Hammon, John W

2018-02-01

Despite more than a half century of "safe" cardiopulmonary bypass (CPB), the evidence base surrounding the conduct of anticoagulation therapy for CPB has not been organized into a succinct guideline. For this and other reasons, there is enormous practice variability relating to the use and dosing of heparin, monitoring heparin anticoagulation, reversal of anticoagulation, and the use of alternative anticoagulants. To address this and other gaps, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiologists, and the American Society of Extracorporeal Technology developed an Evidence Based Workgroup. This was a group of interdisciplinary professionals gathered to summarize the evidence and create practice recommendations for various aspects of CPB. To date, anticoagulation practices in CPB have not been standardized in accordance with the evidence base. This clinical practice guideline was written with the intent to fill the evidence gap and to establish best practices in anticoagulation therapy for CPB using the available evidence. To identify relevant evidence, a systematic review was outlined and literature searches were conducted in PubMed using standardized medical subject heading (MeSH) terms from the National Library of Medicine list of search terms. Search dates were inclusive of January 2000 to December 2015. The search yielded 833 abstracts, which were reviewed by two independent reviewers. Once accepted into the full manuscript review stage, two members of the writing group evaluated each of 286 full papers for inclusion eligibility into the guideline document. Ninety-six manuscripts were included in the final review. In addition, 17 manuscripts published before 2000 were included to provide method, context, or additional supporting evidence for the recommendations as these papers were considered sentinel publications. Members of the writing group wrote and developed recommendations based on review of the articles obtained and achieved

American Society of Clinical Oncology position statement on obesity and cancer.

Science.gov (United States)

Ligibel, Jennifer A; Alfano, Catherine M; Courneya, Kerry S; Demark-Wahnefried, Wendy; Burger, Robert A; Chlebowski, Rowan T; Fabian, Carol J; Gucalp, Ayca; Hershman, Dawn L; Hudson, Melissa M; Jones, Lee W; Kakarala, Madhuri; Ness, Kirsten K; Merrill, Janette K; Wollins, Dana S; Hudis, Clifford A

2014-11-01

Rates of obesity have increased significantly over the last three decades in the United States and globally. In addition to contributing to heart disease and diabetes, obesity is a major unrecognized risk factor for cancer. Obesity is associated with worsened prognosis after cancer diagnosis and also negatively affects the delivery of systemic therapy, contributes to morbidity of cancer treatment, and may raise the risk of second malignancies and comorbidities. Research shows that the time after a cancer diagnosis can serve as a teachable moment to motivate individuals to adopt risk-reducing behaviors. For this reason, the oncology care team--the providers with whom a patient has the closest relationships in the critical period after a cancer diagnosis--is in a unique position to help patients lose weight and make other healthy lifestyle changes. The American Society of Clinical Oncology is committed to reducing the impact of obesity on cancer and has established a multipronged initiative to accomplish this goal by 1) increasing education and awareness of the evidence linking obesity and cancer; 2) providing tools and resources to help oncology providers address obesity with their patients; 3) building and fostering a robust research agenda to better understand the pathophysiology of energy balance alterations, evaluate the impact of behavior change on cancer outcomes, and determine the best methods to help cancer survivors make effective and useful changes in lifestyle behaviors; and 4) advocating for policy and systems change to address societal factors contributing to obesity and improve access to weight management services for patients with cancer. © 2014 by American Society of Clinical Oncology.

Symposium for Alfred Wolf's 75th birthday at American Chemical Society meeting

International Nuclear Information System (INIS)

1998-01-01

This report contains abstracts from the symposium presented by the Division of Nuclear Chemistry and Technology of the American Chemical Society. Sessions covered the following topics: Therapeutic radionuclides--Making the right choice; Aspects of nuclear science; Nuclear structure with large gamma-ray detector arrays and their auxiliary devices; Thirty years of research in nuclear dynamics--From fission to the quark-gluon plasma; Chelated metal ions for diagnosis and therapy; Radiochemistry--Basic and applied; and Applications of small accelerators in science and industry

American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee Report on Electronic Brachytherapy

International Nuclear Information System (INIS)

Park, Catherine C.; Yom, Sue S.; Podgorsak, Matthew B.; Harris, Eleanor; Price, Robert A.; Bevan, Alison; Pouliot, Jean; Konski, Andre A.; Wallner, Paul E.

2010-01-01

The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.

Promoting Employee Health Through an American Cancer Society Program, The CEOs Challenge, Washington State, 2013-2015.

Science.gov (United States)

Harris, Jeffrey R; Parrish, Amanda T; Kohn, Marlana; Hammerback, Kristen; McMillan, Becca; Hannon, Peggy A

2015-12-17

Evidence-based practices in the workplace can increase levels of healthy eating, cancer screening, physical activity, and tobacco cessation but are underused, even in large workplaces. This report summarizes an evaluation of the first year of The CEOs Challenge, a program developed by the American Cancer Society to promote implementation and maintenance of health-promoting, evidence-based workplace practices by large companies. Use of 17 evidence-based practices by 17 companies in the Washington State Chapter of the American Cancer Society's CEOs Against Cancer network was assessed via survey and scored from 0 to 100. Companies received a written report of their baseline performance, followed by at least quarterly consultations with American Cancer Society staff members trained to assist in implementation of these practices. Follow-up performance was measured at 1 year. At baseline, implementation scores were 54.8 for cancer screening, 46.5 for healthy eating, 59.8 for physical activity, and 68.2 for tobacco cessation. At follow-up, scores increased by 19.6 for cancer screening, 19.4 for healthy eating, 16.0 for physical activity, and 9.4 points for tobacco cessation. The CEOs Challenge is a promising approach to chronic disease prevention via the workplace. It brings together one of the nation's largest health-promoting voluntary agencies with the nation's largest employers to promote evidence-based practices targeted at the most common causes of disease and death. The program increased the adoption of these practices and was well-accepted.

Gerald J. Marks, M.D., FACS (1925-), founder of the Society of American Gastrointestinal Endoscopic Surgeons (SAGES).

Science.gov (United States)

Yeo, Theresa P; Cowan, Scott W; Yeo, Charles J

2018-03-01

This historical vignette describes the professional career of Gerald J. Marks, the founder of the Society of American Gastrointestinal and Endoscopic Surgeons and the International Federation of Societies of Endoscopic Surgeons. Dr. Marks is also the founding Associate Editor of Surgical Endoscopy, which celebrated its 30th anniversary in 2017. Dr. Marks is a renowned colorectal surgeon, an accomplished watercolor artist, and a fascinating personality.

American Society for Pain Management Nursing Position Statement: Pain Management in Patients with Substance Use Disorders

OpenAIRE

Oliver, June; Coggins, Candace; Compton, Peggy; Hagan, Susan; Matteliano, Deborah; Stanton, Marsha; St. Marie, Barbara; Strobbe, Stephen; Turner, Helen N.

2012-01-01

The American Society for Pain Management Nursing (ASPMN) has updated its position statement on managing pain in patients with substance use disorders. This position statement is endorsed by the International Nurses Society on Addictions (IntNSA) and includes clinical practice recommendations based on current evidence. It is the position of ASPMN and IntNSA that every patient with pain, including those with substance use disorders, has the right to be treated with dignity, respect, and high qu...

Early Women Sociologist and the American Sociological Society: the Patterns of Exclusion and Participation

Directory of Open Access Journals (Sweden)

Mary Jo Deegan

2012-12-01

Full Text Available American sociology owes a significant debt to early women professionals. Although discriminatedagainst as full colleagues, they nonetheless contributed to sociological thoughtand participated in professional activities. Evidence of both the barriers and opportunitiesaffecting these early female leaders is found in the records of the American SociologicalSociety during its founding years; i.e., from 1906-1931. Analysis of this information, aswell as personal documents of sociologists working during this period, reveals that womendid participate within a restricted range of “expertise”, often associated with traditionalsex roles. Jane Addams was a significant figure in these early years and was a leader withinthe separate, more institutionally limited female sociologist’s network.

Modern recycling methods in metallurgical industry

Directory of Open Access Journals (Sweden)

M. Maj

2010-04-01

Full Text Available The contamination of environment caused by increased industrial activities is the main topic of discussions in Poland and in the world. The possibilities of waste recovery and recycling vary in different sectors of the industry, and the specific methods, developed and improved all the time, depend on the type of the waste. In this study, the attention has been focussed mainly on the waste from metallurgical industry and on the available techniques of its recycling

The beryllium production at Ulba metallurgical plant (Ust-Kamenogrsk, Kazakhstan)

Energy Technology Data Exchange (ETDEWEB)

Dvinskykh, E.M.; Savchuk, V.V.; Tuzov, Y.V. [Ulba Metallurgical Plant (Zavod), Ust-Kamenogorsk, Abay prospect 102 (Kazakhstan)

1998-01-01

The Report includes data on beryllium production of Ulba metallurgical plant, located in Ust-Kamenogorsk (Kazakhstan). Beryllium production is showed to have extended technological opportunities in manufacturing semi-products (beryllium ingots, master alloys, metallic beryllium powders, beryllium oxide) and in production of structural beryllium and its parts. Ulba metallurgical plant owns a unique technology of beryllium vacuum distillation, which allows to produce reactor grades of beryllium with a low content of metallic impurities. At present Ulba plant does not depend on raw materials suppliers. The quantity of stored raw materials and semi-products will allow to provide a 25-years work of beryllium production at a full capacity. The plant has a satisfactory experience in solving ecological problems, which could be useful in ITER program. (author)

Conceptual design for treatment of mining and metallurgical wastewaters which contains arsenic and antimony

Directory of Open Access Journals (Sweden)

Željko Kamberović

2012-12-01

Full Text Available This paper presents a preliminary design for treatment of mining and metallurgical wastewaters (MMW from the basin of antimony “Zajača“, which contains high concentrations of arsenic and antimony. MMW have been investigated in laboratory, due to large difference in concentrations of pollutants. Metallurgical wastewaters were treated using iron (II-sulfate and lime milk used to adjust the pH value at 7. After chemical treatment of metallurgical wastewater and its joining with mining wastewater, residual amount of arsenic in water was below maximum allowed concentrations, while the concentration of antimony, remained above the maximum allowed value. The final phase of purification process was performed using ion exchange resin. After treatment of MMW, they can be used as technical water in the smelting process of secondary raw lead materials.

Microwave-assisted grinding of metallurgical coke; Molienda asistida con microondas de un coque metalurgico

Energy Technology Data Exchange (ETDEWEB)

Ruisanchez, E.; Juarez-Perez, E. J.; Arenillas, A.; Bermudez, J. M.; Menendez, J. A.

2014-10-01

Metallurgical cokes are composed of graphitic carbon (s2p2) and different inorganic compounds with very different capacities to absorb microwave radiation. Moreover, due to the electric conductivity shown by the metallurgical cokes, microwave radiation produces electric arcs or microplasmas, which gives rise to hot spots. Therefore, when these cokes are irradiated with microwaves some parts of the particle experiment a rapid heating, while some others do not heat at all. As a result of the different expansion and stress caused by thermal the shock, small cracks and micro-fissures are produced in the particle. The weakening of the coke particles, and therefore an improvement of its grind ability, is produced. This paper studies the microwave-assisted grinding of metallurgical coke and evaluates the grinding improvement and energy saving. (Author)

Proceedings of the 48. conference of metallurgists : international symposium on process control applications in mining and metallurgical plants

Energy Technology Data Exchange (ETDEWEB)

Shang, H. [Laurentian Univ., Sudbury, ON (Canada). School of Engineering; Ryan, L. [Barrick Gold Corp., Toronto, ON (Canada); Kennedy, S. [Barrick Gold Corp., Dar Es Salaam (Tanzania, United Republic of)] (eds.)

2009-07-01

This international symposium on process control applications in mining and metallurgical plants was held to promote economic and sustainable production practices in Canadian industry applications. Topics related to process control in mining and metallurgical plants included expert systems, model-based control technology, as well as recent advances in simulation, monitoring, and optimization techniques. Methods of improving the process and energy efficiency of mining and metallurgical plants were discussed along with technologies designed to improve monitoring accuracy. The symposium was divided into the following 5 sessions: (1) expert system, control, and performance monitoring, (2) flotation, (3) metallurgical processes, modelling, (4) mining applications, and (5) monitoring, analysis. The symposium featured 23 presentations, of which 2 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance

Directory of Open Access Journals (Sweden)

B. Gajdzik

2014-04-01

Full Text Available The content of this publication consists of notions connected with Total Productive Maintenance (TPM in metallurgical enterprise. The basic areas of devices condition management through Autonomous and Professional Maintenance are described here. Mentioned areas of activities are performed in metallurgical enterprise ArcelorMittal Poland within pillars of World Class Manufacturing (WCM. The aims of UR programs are to maintain the basic functionality of the devices and decrease the number of failures in order to reach improvement of production efficiency.

Christianity and Eugenics: The Place of Religion in the British Eugenics Education Society and the American Eugenics Society, c.1907-1940.

Science.gov (United States)

Baker, Graham J

2014-05-01

Historians have regularly acknowledged the significance of religious faith to the eugenics movement in Britain and the USA. However, much of this scholarship suggests a polarised relationship of either conflict or consensus. Where Christian believers participated in the eugenics movement this has been represented as an abandonment of 'orthodox' theology, and the impression has been created that eugenics was a secularising force. In contrast, this article explores the impact of religious values on two eugenics organisations: the British Eugenics Education Society, and the American Eugenics Society. It is demonstrated that concerns over religion resulted in both these organisations modifying and tempering the public work that they undertook. This act of concealing and minimising the visibly controversial aspects of eugenics is offered as an addition to the debate over 'mainline' versus 'reform' eugenics.

Mining-metallurgical projects for the production of uranium concentrates

International Nuclear Information System (INIS)

Ajuria-Garza, S.

1983-01-01

This report presents an overall view of a complete project for a mining-metallurgical complex for the production of uranium concentrates. Relevant aspects of each important topic are discussed as parts of an integrated methodology. The principal project activities are analyzed and the relationships among the various factors affecting the design are indicated. A list of 96 principal activities is proposed as an example. These activities are distributed in eight groups: initial evaluations preliminary feasibility studies, project engineering, construction, industrial operation, decommissioning and post-decommissioning activities. The environmental impact and the radiological risks due to the construction and operation of the mining metallurgical complex are analyzed. The principles of radiological protection and the regulations, standards and recommendations for radiological protection in uranium mines and mills are discussed. This report is also a guide to the specialized literature: a bibliography with 765 references is included. (author)

Developing a research agenda for the American Society of Colon and Rectal Surgeons: results of a delphi approach.

Science.gov (United States)

Burt, Caroline G; Cima, Robert R; Koltun, Walter A; Littlejohn, Charles E; Ricciardi, Rocco; Temple, Larissa K; Rothenberger, David A; Baxter, Nancy N

2009-05-01

By use of a systematic approach, the aim of this project was to survey a group of colorectal specialists and reach a consensus on the research questions of highest importance in terms of clinical care. A modified Delphi process was performed. In Round 1 research questions were solicited from members of The American Society of Colon and Rectal Surgeons. A review group categorized the results, combined similar questions, and presented them to The American Society of Colon and Rectal Surgeons membership in Round 2 for prioritizing according to importance. In Round 3 the 50 questions with the highest scores in Round 2 were reranked by The American Society of Colon and Rectal Surgeons membership to produce the 20 highest-priority research questions. A total of 203 respondents in Round 1 submitted 746 questions. The review team reduced these to 105 individual questions encompassing 21 topics in colorectal surgical practice. In Rounds 2 and 3, 399 and 360 respondents, respectively, prioritized the questions presented. The final 20 items included 14 questions related to colorectal cancer, and 6 were on benign disease topics. The research agenda produced by this study reflects the clinical issues of greatest importance to colorectal surgeons. The results are of potential benefit to researchers, funding organizations, medical journals, and ultimately, patients.

Increase in female faculty in American Society for Gastrointestinal Endoscopy-sponsored programming over time.

Science.gov (United States)

Enestvedt, Brintha K; DeVivo, Rebecca S; Schmitt, Colleen M; Calderwood, Audrey H

2018-04-01

Female representation in medicine is increasing across all levels of medical training, yet women hold fewer senior leadership positions than men. National recognition, including participation as faculty in society-sponsored programs, is one component of academic advancement. The aim of this study was to characterize female representation among faculty in courses sponsored by the American Society for Gastrointestinal Endoscopy (ASGE). We performed a retrospective review of demographic data, including faculty gender and role, year, and program type, from the ASGE database of its sponsored programs between 2009 and 2014. Female faculty rates were compared with the rate of female membership in the ASGE and by faculty role and course type over time. Between 2009 and 2014 there were a total of 2020 ASGE course faculty positions of which women comprised 19%. There was a significant increase in the proportion of women that served as course faculty over time (P < .0005). Female faculty participation exceeded the ASGE female domestic membership rate in all years. Women were more likely to serve as course directors than lecturers (25% vs 18%, P = .004) and to participate in smaller courses (P = .0003). We found an increase in female participation in ASGE programming over time, suggesting that specialty societies are making efforts to improve female representation at the national level. Future work should evaluate whether or not these opportunities translate into leadership roles for women within their own institutions or lead to promotions for women over time. Copyright © 2018 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

American Society of Radiation Oncology Recommendations for Documenting Intensity-Modulated Radiation Therapy Treatments

International Nuclear Information System (INIS)

Holmes, Timothy; Das, Rupak; Low, Daniel; Yin Fangfang; Balter, James; Palta, Jatinder; Eifel, Patricia

2009-01-01

Despite the widespread use of intensity-modulated radiation therapy (IMRT) for approximately a decade, a lack of adequate guidelines for documenting these treatments persists. Proper IMRT treatment documentation is necessary for accurate reconstruction of prior treatments when a patient presents with a marginal recurrence. This is especially crucial when the follow-up care is managed at a second treatment facility not involved in the initial IMRT treatment. To address this issue, an American Society for Radiation Oncology (ASTRO) workgroup within the American ASTRO Radiation Physics Committee was formed at the request of the ASTRO Research Council to develop a set of recommendations for documenting IMRT treatments. This document provides a set of comprehensive recommendations for documenting IMRT treatments, as well as image-guidance procedures, with example forms provided.

Overview of the ANS [American Nuclear Society] mathematics and computation software standards

International Nuclear Information System (INIS)

Smetana, A.O.

1991-01-01

The Mathematics and Computations Division of the American Nuclear Society sponsors the ANS-10 Standards Subcommittee. This subcommittee, which is part of the ANS Standards Committee, currently maintains four ANSI/ANS software standards. These standards are: Recommended Programming Practices to Facilitate the Portability of Scientific Computer Programs, ANS-10.2; Guidelines for the Documentation of Computer Software, ANS-10.3; Guidelines for the Verification and Validation of Scientific and Engineering Computer Programs for the Nuclear Industry, ANS-10.4; and Guidelines for Accommodating User Needs in Computer Program Development, ANS-10.5. 5 refs

NASA/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1991

International Nuclear Information System (INIS)

Tiwari, S.N.

1991-09-01

In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spent 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society of Engineering Education supervises the programs. The objects were the following: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate and exchange ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of the participants' institutions; and (4) to contribute to the research objectives of the NASA center

Control and metallurgical examination on safety injection piping

International Nuclear Information System (INIS)

Thebault, Y.; Grandjean, Y.; Gauthier, V.; Lambert, B.; Debustcher, B.

1998-01-01

From 1992 until 1997, cracking phenomena by thermal fatigue regarding safety injection piping were evidenced on several PWR 900 MW reactors. These events led EDF to the implementation of a first maintenance programme. In December 1996, a new leak occurred on an EDF 900 MW PWR in operation and was located on a safety injection pipe. In site inspections and metallurgical examinations carried out in the EDF hot Laboratory evidenced defects inside the pipe, out of the welding areas. These degradations are the consequence of a fatigue cracking phenomenon with thermal cycling linked to permanent tensile stresses. Following this incident, a programme of non destructive testing was implemented on all the EDF 900 MW plants. These inspections exhibited the same defects on other PWR 900 MW units. The results of the metallurgical examinations and also in site inspection results allowed EDF to understand the phenomenon and to validate an inspection programme on the one hand and a modification of the design of the circuits on the other hand. (authors)

Efficiency of Polish metallurgical industry based on data envelopment analysis

Directory of Open Access Journals (Sweden)

J. Baran

2016-04-01

Full Text Available The main purpose of this paper is to compare the technical efficiency of 12 sectors manufacturing basic metals and metal products in Poland. This article presents the use of Data Envelopment Analysis models, to determine overall technical efficiency, pure technical efficiency and scale efficiency of metallurgical branches in Poland. The average technical efficiency of metallurgical industry in Poland was quite high. The analysis gives a possibility to create a ranking of sectors. Three branches were found to be fully efficient: manufacture of basic iron and steel and of ferroalloys, manufacture of basic precious and other non - ferrous metals and manufacture of tubes, pipes, hollow profiles and related fittings, of steel. The results point out the reasons of the inefficiency and provide improving directions for the inefficient sectors.

American Society of Clinical Oncology/College of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer (unabridged version).

NARCIS (Netherlands)

Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

2010-01-01

PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

Validation of the American Society for Reproductive Medicine guidelines/recommendations in white European men presenting for couple's infertility.

Science.gov (United States)

Ventimiglia, Eugenio; Capogrosso, Paolo; Boeri, Luca; Ippolito, Silvia; Scano, Roberta; Moschini, Marco; Gandaglia, Giorgio; Papaleo, Enrico; Montorsi, Francesco; Salonia, Andrea

2016-10-01

To retrospectively validate the American Society for Reproductive Medicine (ASRM) guidelines/recommendations concerning endocrine evaluation in a cohort of white European men presenting for couple's infertility. Retrospective study. Academic reproductive medicine outpatient clinic. Cohort of 1,056 consecutive infertile men (noninterracial infertile couples). Testicular volume was assessed with a Prader orchidometer. Serum hormones were measured (8-10 a.m.) in all cases. Hypogonadism was defined as total T Society definition. Semen analysis values were assessed based on the 2010 World Health Organisation reference criteria. ASRM indications for endocrine assessment in infertile men (sperm concentration Society classification criteria. Conversely, 37 (23.7%) out of 156 patients with biochemical hypogonadism would have been overlooked. The overall predictive accuracy, sensitivity, and specificity of the ASRM guidelines was 58%, 76%, and 39%, respectively. Our nomogram was not reliable enough to predict hypogonadism, despite demonstrating a significantly higher predictive accuracy (68%) than the ASRM guidelines. The current findings show that the ASRM guidelines/recommendations for male infertility workup may not be suitable for application in white European infertile men. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

Science.gov (United States)

Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

2010-03-15

The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site. Copyright 2010. Published by Elsevier Inc.

Economic statistics for the extractive and metallurgical industries for 1974/1975

Energy Technology Data Exchange (ETDEWEB)

Medaets, J

1977-11-01

Statistical data are presented for the extractive industries (coal, ore, quarries etc); coke and agglomerates manufacture; metallurgical industries; and the related hydrology. (In French and in Dutch)

Electric arc spraying for restoration and repair of metallurgical equipment parts

Directory of Open Access Journals (Sweden)

В’ячеслав Олександрович Роянов

2016-07-01

Full Text Available It has been shown that the electric arc spraying with the use of powder wires can be used to repair and restore parts of metallurgical equipment. The technology of spraying parts by means of the cored wire Steelcored M8TUV; T462MMIN5 and combinations of steel and aluminum wires to restore shaft-gears, shaft-beams, cranes axles for the foundry of the Moldavian Metallurgical Plant has been introduced. The composition of the flux-cored wires MMP-2,3 developed at the Department of Equipment and welding production technology of PSTU that provides the required hardness and adhesion of the coating and the substrate have been shown and the results of the coatings properties studies have been published. Studies have shown matching properties of the coatings to be used for details of the metallurgical equipment working under difficult conditions, including the rolls of rolling mills. Cored wire was used for pilot plating of the rolls surface of the skin-rolling stand at the cold-rolling mill at Illich Steel and Iron Works, Mariupol. Residual coating thickness ranged from 15 to 25 microns. Strip sized 0,9 × 1025 mm has been rolled, the squeezing is equal to 0,8...1,0%.

Hypoglycemia and diabetes: a report of a workgroup of the American Diabetes Association and the Endocrine Society.

Science.gov (United States)

Seaquist, Elizabeth R; Anderson, John; Childs, Belinda; Cryer, Philip; Dagogo-Jack, Samuel; Fish, Lisa; Heller, Simon R; Rodriguez, Henry; Rosenzweig, James; Vigersky, Robert

2013-05-01

To review the evidence about the impact of hypoglycemia on patients with diabetes that has become available since the past reviews of this subject by the American Diabetes Association and The Endocrine Society and to provide guidance about how this new information should be incorporated into clinical practice. Five members of the American Diabetes Association and five members of The Endocrine Society with expertise in different aspects of hypoglycemia were invited by the Chair, who is a member of both, to participate in a planning conference call and a 2-day meeting that was also attended by staff from both organizations. Subsequent communications took place via e-mail and phone calls. The writing group consisted of those invitees who participated in the writing of the manuscript. The workgroup meeting was supported by educational grants to the American Diabetes Association from Lilly USA, LLC and Novo Nordisk and sponsorship to the American Diabetes Association from Sanofi. The sponsors had no input into the development of or content of the report. The writing group considered data from recent clinical trials and other studies to update the prior workgroup report. Unpublished data were not used. Expert opinion was used to develop some conclusions. Consensus was achieved by group discussion during conference calls and face-to-face meetings, as well as by iterative revisions of the written document. The document was reviewed and approved by the American Diabetes Association's Professional Practice Committee in October 2012 and approved by the Executive Committee of the Board of Directors in November 2012 and was reviewed and approved by The Endocrine Society's Clinical Affairs Core Committee in October 2012 and by Council in November 2012. The workgroup reconfirmed the previous definitions of hypoglycemia in diabetes, reviewed the implications of hypoglycemia on both short- and long-term outcomes, considered the implications of hypoglycemia on treatment outcomes

Growing the science of agronomy by growing the profession: a Message from the President of the American Society of Agronomy

Science.gov (United States)

We often refer to the American Society of Agronomy (ASA) as being both a scientific and professional society. Membership within the organization includes a wide range of people from diverse regions and cultures of the world working with complex and diverse cropping systems. Yet members are unified...

Comparison of current practices of cardiopulmonary perfusion technology in Iran with American Society of Extracorporeal Technology's standards.

Science.gov (United States)

Faravan, Amir; Mohammadi, Nooredin; Alizadeh Ghavidel, Alireza; Toutounchi, Mohammad Zia; Ghanbari, Ameneh; Mazloomi, Mehran

2016-01-01

Standards have a significant role in showing the minimum level of optimal optimum and the expected performance. Since the perfusion technology staffs play an the leading role in providing the quality services to the patients undergoing open heart surgery with cardiopulmonary bypass machine, this study aimed to assess the standards on how Iranian perfusion technology staffs evaluate and manage the patients during the cardiopulmonary bypass process and compare their practice with the recommended standards by American Society of Extracorporeal Technology. In this descriptive study, data was collected from 48 Iranian public hospitals and educational health centers through a researcher-created questionnaire. The data collection questionnaire assessed the standards which are recommended by American Society of Extracorporeal Technology. Findings showed that appropriate measurements were carried out by the perfusion technology staffs to prevent the hemodilution and avoid the blood transfusion and unnecessary blood products, determine the initial dose of heparin based on one of the proposed methods, monitor the anticoagulants based on ACT measurement, and determine the additional doses of heparin during the cardiopulmonary bypass based on ACT or protamine titration. It was done only in 4.2% of hospitals and health centers. Current practices of cardiopulmonary perfusion technology in Iran are inappropriate based on the standards of American Society of Cardiovascular Perfusion. This represents the necessity of authorities' attention to the validation programs and development of the caring standards on one hand and continuous assessment of using these standards on the other hand.

The American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies Joint Committee recommendations for education and training in ultrasound-guided interventional pain procedures.

Science.gov (United States)

Narouze, Samer N; Provenzano, David; Peng, Philip; Eichenberger, Urs; Lee, Sang Chul; Nicholls, Barry; Moriggl, Bernhard

2012-01-01

The use of ultrasound in pain medicine for interventional axial, nonaxial, and musculoskeletal pain procedures is rapidly evolving and growing. Because of the lack of specialty-specific guidelines for ultrasonography in pain medicine, an international collaborative effort consisting of members of the Special Interest Group on Ultrasonography in Pain Medicine from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies developed the following recommendations for education and training in ultrasound-guided interventional pain procedures. The purpose of these recommendations is to define the required skills for performing ultrasound-guided pain procedures, the processes for appropriate education, and training and quality improvement. Training algorithms are outlined for practice- and fellowship-based pathways. The previously published American Society of Regional Anesthesia and Pain Medicine and European Society of Regional Anaesthesia and Pain Therapy education and teaching recommendations for ultrasound-guided regional anesthesia served as a foundation for the pain medicine recommendations. Although the decision to grant ultrasound privileges occurs at the institutional level, the committee recommends that the training guidelines outlined in this document serve as the foundation for educational training and the advancement of the practice of ultrasonography in pain medicine.

Clinical Utilization of Repeated Open Application Test Among American Contact Dermatitis Society Members.

Science.gov (United States)

Brown, Gabrielle E; Botto, Nina; Butler, Daniel C; Murase, Jenny E

2015-01-01

The repeated open application test (ROAT) provides useful information regarding allergens in suspected cases of allergic contact dermatitis; however, standardized methodology has not been established. The aim of this study was to assess how ROAT is used in clinical and research settings. We distributed a survey regarding ROAT practice to the American Contact Dermatitis Society and conducted a literature review of ROAT utilization in research. A total of 67 American Contact Dermatitis Society members participated in the survey. Respondents most frequently recommend application of leave-on products twice daily (46.0%) and rinse-off products once daily (43.5%). The most commonly used anatomical sites include the forearm (38.7%) and antecubital fossa (32.3%). Most respondents continue ROAT for 1 (49.2%) or 2 weeks (31.7%). Literature review of 32 studies (26 leave-on, 6 rinse-off) revealed that application frequency is most common at twice daily for both leave-on (96.2%) and rinse-off (50.0%) products. The most common anatomical site is the forearm (62.5%), with an overall study duration of 3 to 4 weeks (65.6%). When comparing ROAT clinical and research practice, the majority trend was consistent for leave-on product application frequency and anatomical site, but not for rinse-off product application frequency, or overall duration. Further research is needed to determine best practice recommendations.

Overview of space nuclear technologies and the American Nuclear Society

International Nuclear Information System (INIS)

Singleterry, R.C. Jr.

2000-01-01

The American Nuclear Society (ANS) has seen an aspect of the universe where nuclear technology is the best energy source available for power, transportation, etc. The National Aeronautics and Space Administration (NASA) has been exploiting this aspect of the universe by sending machines and humans into it and exploring, colonizing, industrializing, developing, inhabiting, etc. Space is the final frontier, and nuclear technology is the best suited for today's or the next century's space exploration and development. Many aspects of nuclear technology and its uses in space will be needed. ANS encompasses these and many more aspects of nuclear technology, and all have some role to play in the exploration and development of space. It should be ANS's intent to be an advisory body to NASA on the nuclear aspects of space exploration

An Official American Thoracic Society Research Statement : Current Challenges Facing Research and Therapeutic Advances in Airway Remodeling

NARCIS (Netherlands)

Prakash, Y S; Halayko, Andrew J; Gosens, Reinoud; Panettieri Jr., Reynold A; Camoretti-Mercado, Blanca; Penn, Raymond B; Burgess, Janette K

2017-01-01

BACKGROUND: Airway remodeling (AR) is a prominent feature of asthma and other obstructive lung diseases that is minimally affected by current treatments. The goals of this Official American Thoracic Society (ATS) Research Statement are to discuss the scientific, technological, economic, and

Upgraded metallurgical-grade silicon solar cells with efficiency above 20%

Energy Technology Data Exchange (ETDEWEB)

Zheng, P.; Rougieux, F. E.; Samundsett, C.; Yang, Xinbo; Wan, Yimao; Macdonald, D. [Research School of Engineering, College of Engineering and Computer Science, The Australian National University, Canberra, Australian Capital Terrritory 2601 (Australia); Degoulange, J.; Einhaus, R. [Apollon Solar, 66 Cours Charlemagne, Lyon 69002 (France); Rivat, P. [FerroPem, 517 Avenue de la Boisse, Chambery Cedex 73025 (France)

2016-03-21

We present solar cells fabricated with n-type Czochralski–silicon wafers grown with strongly compensated 100% upgraded metallurgical-grade feedstock, with efficiencies above 20%. The cells have a passivated boron-diffused front surface, and a rear locally phosphorus-diffused structure fabricated using an etch-back process. The local heavy phosphorus diffusion on the rear helps to maintain a high bulk lifetime in the substrates via phosphorus gettering, whilst also reducing recombination under the rear-side metal contacts. The independently measured results yield a peak efficiency of 20.9% for the best upgraded metallurgical-grade silicon cell and 21.9% for a control device made with electronic-grade float-zone silicon. The presence of boron-oxygen related defects in the cells is also investigated, and we confirm that these defects can be partially deactivated permanently by annealing under illumination.

Post-failure metallurgical investigation of KNK steam generator tube damage

Energy Technology Data Exchange (ETDEWEB)

Lorenz, H; Herberg, G

1975-07-01

In September 1973 the sodium-cooled reactor KNK was shut down due to a steam generator tube damage. Failure location and results of the metallurgical examination of the damage are described. The cause of the damage is discussed. (author)

The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines for Cardiopulmonary Bypass--Temperature Management During Cardiopulmonary Bypass.

Science.gov (United States)

Engelman, Richard; Baker, Robert A; Likosky, Donald S; Grigore, Alina; Dickinson, Timothy A; Shore-Lesserson, Linda; Hammon, John W

2015-08-01

In order to improve our understanding of the evidence-based literature supporting temperature management during adult cardiopulmonary bypass, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiology and the American Society of ExtraCorporeal Technology tasked the authors to conduct a review of the peer-reviewed literature, including: 1) optimal site for temperature monitoring, 2) avoidance of hyperthermia, 3) peak cooling temperature gradient and cooling rate, and 4) peak warming temperature gradient and rewarming rate. Authors adopted the American College of Cardiology/American Heart Association method for development clinical practice guidelines, and arrived at the following recommendations: CLASS I RECOMMENDATIONS: a)The oxygenator arterial outlet blood temperature is recommended to be utilized as a surrogate for cerebral temperature measurement during CPB. (Class I, Level C) b)To monitor cerebral perfusate temperature during warming, it should be assumed that the oxygenator arterial outlet blood temperature under-estimates cerebral perfusate temperature. (Class I, Level C) c)Surgical teams should limit arterial outlet blood temperature to<37°C to avoid cerebral hyperthermia. (Class 1, Level C) d)Temperature gradients between the arterial outlet and venous inflow on the oxygenator during CPB cooling should not exceed 10°C to avoid generation of gaseous emboli. (Class 1, Level C) e)Temperature gradients between the arterial outlet and venous inflow on the oxygenator during CPB rewarming should not exceed 10°C to avoid out-gassing when blood is returned to the patient. (Class 1, Level C) CLASS IIa a)Pulmonary artery or nasopharyngeal temperature recording is reasonable for weaning and immediate post-bypass temperature measurement. (Class IIa, Level C)b)Rewarming when arterial blood outlet temperature ≥30° C: i.To achieve the desired temperature for separation from bypass, it is reasonable to maintain a temperature gradient between

IFM – SCIENTIFIC CENTRE OF THE DEVELOPMENT OF THE UKRAINIAN METALLURGICAL INDUSTRY

Directory of Open Access Journals (Sweden)

BOLSHAKOV V. I.

2017-01-01

Full Text Available The history of creation and development of the Institute of ferrous metallurgy of the Ukrainian Academy of Sciences named after Z. I. Nekrasov is regarded in the article. IFM has become the scientific centre of the development of the metallurgical industry of Ukraine. Researches of the outstanding scientists show their significant contribution in the development of the metallurgical science and implementation of their achievements in the production of the metallurgical industry of Ukraine. Analysis of publications. History of the Institute of the ferrous metallurgy is regarded in the fundamental works devoted to the development of the metallurgical industry in Ukraine and in the works published to the jubilee dates of the prominent scientists academicians Z. I. Nekrasov, V. I. Bol’shakov and others. The purpose of the article is to analyze the process of the creation of the Institute and the stages of its development in the 20th and 21st centuries and to define the influence of the economic and political situation in the country upon this process? To regard the role of the outstanding scientists and influence of their achievements on the development of the metallurgical industry of Ukraine. The history of IFM began in 1939 when it was organized in Kharkiv as a part of the Academy of Sciences of Ukraine. At the beginning of the Great Patriotic war the Institute was moved to Ufa – the capital of Bashkiria. During the war the scientists of the Institute tried to increase the output of metal and special steels for the defence industry. In 1943 the Institute moved to Moscow and then to Kiev. In 1952 it was decided to move the Institute to Dnepropetrovsk. In order to combine the scientific researches and production of metal. Z. I. Nekrasov was elected Director of the Institute. The departments of the Indtitute were headed by academicians Z. I. Nekrasov, A. P. Chekmariov, K. F. Starodubov, Correspondence Members of the Ukrainian Academy of Sciences

Promoting Ocean Literacy through American Meteorological Society Programs

Science.gov (United States)

Passow, Michael; Abshire, Wendy; Weinbeck, Robert; Geer, Ira; Mills, Elizabeth

2017-04-01

American Meteorological Society Education Programs provide course materials, online and physical resources, educator instruction, and specialized training in ocean, weather, and climate sciences (https://www.ametsoc.org/ams/index.cfm/education-careers/education-program/k-12-teachers/). Ocean Science literacy efforts are supported through the Maury Project, DataStreme Ocean, and AMS Ocean Studies. The Maury Project is a summer professional development program held at the US Naval Academy designed to enhance effective teaching of the science, technology, engineering, and mathematics of oceanography. DataStreme Ocean is a semester-long course offered twice a year to participants nationwide. Created and sustained with major support from NOAA, DS Ocean explores key concepts in marine geology, physical and chemical oceanography, marine biology, and climate change. It utilizes electronically-transmitted text readings, investigations and current environmental data. AMS Ocean Studies provides complete packages for undergraduate courses. These include online textbooks, investigations manuals, RealTime Ocean Portal (course website), and course management system-compatible files. It can be offered in traditional lecture/laboratory, completely online, and hybrid learning environments. Assistance from AMS staff and other course users is available.

Qualifications versus useful knowledge in metallurgical enterprise

Directory of Open Access Journals (Sweden)

B. Gajdzik

2014-01-01

Full Text Available The article presents notions connected with resource structure of useful knowledge packages in metallurgical enterprise. Dependence between building competence of employees and using knowledge for the need of better efficiency of the enterprise was discussed here. ArcelorMittal Poland enterprise served as case study here due to the fact that it strives at World Class Management by putting emphasis on bringing areas of business activity to perfection through participation and involvement of employees.

Implementing an innovated preservation technology: The American Society of Transplant Surgeons' (ASTS) Standards Committee White Paper on Ex Situ Liver Machine Perfusion.

Science.gov (United States)

Quintini, Cristiano; Martins, Paulo N; Shah, Shimul; Killackey, Mary; Reed, Alan; Guarrera, James; Axelrod, David A

2018-05-23

The pervasive shortage of deceased donor liver allografts contributes to significant waitlist mortality despite efforts to increase organ donation. Ex vivo liver perfusion appears to enhance preservation of donor organs, extending viability and potentially evaluating function in organs previously considered too high risk for transplant. These devices pose novel challenges for organ allocation, safety, training, and finances. This white paper describes the American Society of Transplant Surgeons' belief that organ preservation technology is a vital advance, but its use should not change fundamental aspects of organ allocation. Additional data elements need to be collected, made available for organ assessment by transplant professionals to allow determination of organ suitability in the case of reallocation and incorporated into risk adjustment methodology. Finally, further work is needed to determine the optimal strategy for management and oversight of perfused organs prior to transplantation. © 2018 The American Society of Transplantation and the American Society of Transplant Surgeons.

Effects of mechanical activation on the carbothermal reduction of chromite with metallurgical coke

Directory of Open Access Journals (Sweden)

Kenan Yıldız

2010-06-01

Full Text Available The carbothermal reduction of mechanically activated chromite with metallurgical coke under an argon atmosphere was investigated at temperatures between 1100 and 1400°C and the effects of the mechanical activation on chromite structure were analyzed by x-ray diffraction (XRD and scanning electron microscopy (SEM. An increase in specific surface area resulted in more contact points. The activation procedure led to amorphization and structural disordering in chromite and accelerated the degree of reduction and metalization in the mixture of chromite and metallurgical coke. Carbothermal reduction products were analzed by using scanning electron microscopy (SEM/EDS.

Radioactivity of raw materials, metallurgical and casting products

International Nuclear Information System (INIS)

Hons, J.

2000-01-01

At present, the radioactive contamination of metallurgical products and initial materials represent a potential obstacle in foreign and domestic trade. It is of course an undesirable threat o the living environment on the one side and, at the same time, a new incorrectly used means for suppressing competition and forming a protection 'umbrella' of the national market to desirable imports on the other hand

Making contact for contact dermatitis: a survey of the membership of the American Contact Dermatitis Society.

Science.gov (United States)

Nezafati, Kaveh A; Carroll, Bryan; Storrs, Frances J; Cruz, Ponciano D

2013-01-01

The American Contact Dermatitis Society (ACDS) is the principal organization representing the subspecialty of contact dermatitis in the United States. The aim of this study was to characterize ACDS members with respect to demographic characteristics, patch-test practices, and sentiments regarding the Society and its journal Dermatitis. We conducted cross-sectional postal and online surveys of ACDS members. More than a third of ACDS members responded to the survey, 92% of whom practice dermatology, and most of whom are community practitioners. Responders manage patients with allergic and irritant dermatitis at a similar frequency. On average, they patch test 4 patients per week using 66 allergens per patient, which often include customized trays. Almost half of these practitioners learned patch testing from their residency programs. Most of the responders read and value the Society journal, value the Contact Allergen Management Program database, and attend society meetings. The ACDS is comprised overwhelmingly of dermatologists who are primarily community-based, young relative to the start of their practices, and use the Society's resources for continuing education.

Radiation protection aspects in the metallurgical examination of irradiated fuel elements

International Nuclear Information System (INIS)

Janardhanan, S.; Pillai, P.M.B.; Jacob, John; Kutty, K.N.; Wattamwar, S.B.; Mehta, S.K.

1981-01-01

The operational safety requirements of hot cell facilities for metallurgical examination of irradiated natural and enriched uranium fuel elements are highlighted. The cell shielding is designed for handling activities equivalent of 10 2 to 10 5 curies of gamma energy of 1.3 Mev. A brief outline of the built-in design features relevant to safety assessment is also incorporated. Reference is made to some salient features of Radiometallurgy Cells at Trombay. Metallurgical operations include investigations on cladding failure of irradiated material structure and specimen preparation from hot fuel element. The radiation protection aspects presented in this paper show that handling low irradiated fuel elements in these beta-gamma cells do not cause serious operational safety problems. The procedures followed and the containment provided would adequately restrict exposure of operational staff to acceptable limits. (author)

Official American Thoracic Society technical standards: spirometry in the occupational setting.

Science.gov (United States)

Redlich, Carrie A; Tarlo, Susan M; Hankinson, John L; Townsend, Mary C; Eschenbacher, William L; Von Essen, Susanna G; Sigsgaard, Torben; Weissman, David N

2014-04-15

This document addresses aspects of the performance and interpretation of spirometry that are particularly important in the workplace, where inhalation exposures can affect lung function and cause or exacerbate lung diseases, such as asthma, chronic obstructive pulmonary disease, or fibrosis. Issues that previous American Thoracic Society spirometry statements did not adequately address with respect to the workplace were identified for systematic review. Medline 1950-2012 and Embase 1980-2012 were searched for evidence related to the following: training for spirometry technicians; testing posture; appropriate reference values to use for Asians in North America; and interpretative strategies for analyzing longitudinal change in lung function. The evidence was reviewed and technical recommendations were developed. Spirometry performed in the work setting should be part of a comprehensive workplace respiratory health program. Effective technician training and feedback can improve the quality of spirometry testing. Posture-related changes in FEV1 and FVC, although small, may impact interpretation, so testing posture should be kept consistent and documented on repeat testing. Until North American Asian-specific equations are developed, applying a correction factor of 0.88 to white reference values is considered reasonable when testing Asian American individuals in North America. Current spirometry should be compared with previous tests. Excessive loss in FEV1 over time should be evaluated using either a percentage decline (15% plus loss expected due to aging) or one of the other approaches discussed, taking into consideration testing variability, worker exposures, symptoms, and other clinical information. Important aspects of workplace spirometry are discussed and recommendations are provided for the performance and interpretation of workplace spirometry.

Christianity and Eugenics: The Place of Religion in the British Eugenics Education Society and the American Eugenics Society, c.1907–1940

Science.gov (United States)

Baker, Graham J.

2014-01-01

Historians have regularly acknowledged the significance of religious faith to the eugenics movement in Britain and the USA. However, much of this scholarship suggests a polarised relationship of either conflict or consensus. Where Christian believers participated in the eugenics movement this has been represented as an abandonment of ‘orthodox’ theology, and the impression has been created that eugenics was a secularising force. In contrast, this article explores the impact of religious values on two eugenics organisations: the British Eugenics Education Society, and the American Eugenics Society. It is demonstrated that concerns over religion resulted in both these organisations modifying and tempering the public work that they undertook. This act of concealing and minimising the visibly controversial aspects of eugenics is offered as an addition to the debate over ‘mainline’ versus ‘reform’ eugenics. PMID:24778464

Methodological Approaches to Ensuring Innovative Development of Metallurgical Enterprises on the Basis of Principles of Economic Nationalism

Directory of Open Access Journals (Sweden)

Denysov Kostyantyn V.

2017-01-01

Full Text Available The economic, energy and environmental aspects of the activities of metallurgical enterprises are analyzed in the context of the need to ensure their sustainable development. The high energy intensity of the production process, the low efficiency and irrational structure of capital expenditures for environmental protection, the dominance of material costs in the final cost of finished products at the expense of labor and social contributions are indicated. There proved the low effectiveness of the previous measures of the industrial policy of the metallurgical industry innovative development that were not in compliance with the requirements of the WTO and led to taking compensatory measures against the Ukrainian steel on world markets. The potential of economic nationalism as a system for ensuring the innovative development of the metallurgical industry is considered. There determined the priorities of the industrial policy for the development of metallurgical enterprises based on the principles of economic nationalism and taking into account the global trends in the development of trade and economic relations and Ukraine’s commitments to the WTO.

The American Society for Clinical Pathology's 2015 Wage Survey of Medical Laboratories in the United States.

Science.gov (United States)

Garcia, Edna; Fisher, Patrick B

2017-05-01

To inform the pathology and laboratory field of the most recent national wage data from the American Society for Clinical Pathology (ASCP). Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2015 wage survey was conducted through collaboration between the ASCP's Institute of Science, Technology, and Policy in Washington, DC, and the ASCP Board of Certification in Chicago, Illinois. Electronic survey invitations were sent to individuals who are currently practicing in the field. Data reveal increased salaries since 2013 for all staff-level laboratory professionals surveyed except phlebotomists and pathologists' assistants. Laboratory assistants and phlebotomists, regardless of level, continue to have lower salaries while pathologists' assistants and administration personnel have higher salaries than the rest of the laboratory professions surveyed. Survey results put emphasis on strategic recruitment and retention by laboratory training programs and institutions that hire laboratory professionals. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

DIFFERENCES OF COMMITMENT BETWEEN GENERATIONS X AND Y – A STUDY IN A METALLURGICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Fábio Teodoro Tolfo Ribas

2015-06-01

Full Text Available The way each generation acts in society and in organizations is always a matter of study and appreciation (LOMBARDIA; STEIN & PIN, 2008. Thus, this study aimed to examine the organizational commitment in its affetctive, instrumental and normative dimensions in different generational groups (X and Y of Metallurgical Industry in the city of Caxias do Sul (RS. The research is descriptive and quantitative in nature. To reach its objective it uses a validated questionnaire, based on Ribas 2010, with 96 professional of the administrative sector. The results identify that the respondents have very similar approaches regarding affective, instrumental and normative commitment perceptions. Still, it was noticed that the highest means for both generations, were obtained in the construct of affective commitment. The clearest difference emerged in the focus of instrumental commitment, which determines the individual’s need to remain in business.

The American Society of Clinical Oncology's Efforts to Support Global Cancer Medicine

Science.gov (United States)

El-Saghir, Nagi S.; Cufer, Tanja; Cazap, Eduardo; de Guzman, Roselle; Othieno-Abinya, Nicholas Anthony; Sanchez, Jose Angel; Pyle, Doug

2016-01-01

Despite much progress in the management of malignant diseases, the number of new cases and cancer-related deaths continues to rise around the world. More than half of new cases occur in economically developing countries, where more than two thirds of cancer deaths are expected. However, implementation of all necessary steps to accomplish the dissemination of state-of-the-art prevention, diagnosis, and management will require increased allocation of resources, and, more importantly, harmonization of the efforts of hundreds of national and international public health agencies, policy-setting bodies, governments, pharmaceutical companies, and philanthropic organizations. More than 30% of the members of the American Society of Clinical Oncology (ASCO) reside and practice outside US borders, and more than half of attendees at all of the scientific congresses and symposia organized by ASCO are international. As cancer has become an increasingly global disease, ASCO has evolved as a global organization. The ASCO Board of Directors currently includes members from France, Brazil, and Canada. In 2013, the ASCO Board of Directors identified a number of strategic priorities for the future. Recognizing the importance of non-US members to the society, their first strategic priority was improving the society's service to non-US members and defining these members' identity in the international oncology community. This article reviews current ASCO activities in the international arena and its future plans in global oncology. PMID:26578614

Electronic Publishing and The American Astronomical Society

Science.gov (United States)

Milkey, R. W.

1999-12-01

Electronic Publishing has created, and will continue to create, new opportunities and challenges for representing scientific work in new media and formats. The AAS will position itself to take advantage of these, both for newly created works and for improved representation of works already published. It is the view of the AAS that we hold the works that we publish in trust for our community and are obligated to protect the integrity of these works and to assure that they continue to be available to the research community. Assignment of copyright to the AAS by the author plays a central role in the preservation of the integrity and accessability of the literature published by the American Astronomical Society. In return for such assignment the AAS allows the author to freely use the work for his/her own purpose and to control the grant of permission to third parties to use such materials. The AAS retains the right to republish the work in whatever format or medium, and to retain the rights after the author's death. Specific advantages to this approach include: Assurance of the continued availability of the materials to the research and educational communities; A guarantee of the intellectual integrity of the materials in the archive; Stimulation of the development of new means of presentation or of access to the archival literature; and Provision of a uniformity of treatment for copyright issues and to relieve the individual authors of much of the administrative work.

Maintaining the competitiveness of the American fisheries society journals: an assessment based on influence and cost-effectiveness

Science.gov (United States)

Hewitt, David A.; Link, Jason S.; Steinich, Dave R.; Wahl, David H.; Mather, Martha E.

2009-01-01

Recent changes in the landscape of scientific publishing prompted the Publications Overview Committee of the American Fisheries Society (AFS) to review the Society's portfolio of scientific journals. We evaluated journals based on metrics in two categories: (1) citation-based measures of the influence of a journal on the scientific literature, and (2) measures of the cost-effectiveness of a journal (citation rate adjusted for subscription cost). Over the long-term, we found that ecology journals had far stronger citation-based influence than fisheries and aquatic sciences journals, and that journals publishing primarily basic research had stronger influence than journals publishing applied research (including four AFS journals and Fisheries magazine). In evaluating the current status of fisheries and aquatic sciences journals, we found that metrics of influence and cost-effectiveness provided considerably different portrayals of journals relative to their peers. In terms of citation-based influence, we found that the AFS journal Transactions of the American Fisheries Society (TAFS) and Fisheries magazine were competitive with highly regarded peer fisheries journals, but that North American Journal of Aquaculture (NAJA) and Journal of Aquatic Animal Health (JAAH) were less influential than their peers. The citation-based influence of North American Journal of Fisheries Management (NAJFM) was intermediate between TAFS/Fisheries and NAJA/JAAH. For journals like NAJFM and NAJA, we expect that much of the scientific influence on policy and management is not captured by citations in the primary literature, and alternative methods of evaluation may be needed. All of the AFS journals ranked highly with regard to cost-effectiveness because their subscription costs are low, and these rankings are in accordance with membership needs and the strategic mission of AFS to provide broad and timely dissemination of scientific information. We conclude by suggesting

American Fisheries Society 136th Annual Meeting Lake Placid, NY 10-14 September, 2006

Science.gov (United States)

Einhouse, D.; Walsh, M.G.; Keeler, S.; Long, J.M.

2005-01-01

The New York Chapter of the American Fisheries Society and the New York State Department of Environmental Conservation invite you to experience the beauty of New York's famous Adirondack Park as the American Fisheries Society (AFS) convenes its 136th Annual Meeting in the legendary Olympic Village of Lake Placid, NY, 10-14 September 2006. Our meeting theme "Fish in the Balance" will explore the interrelation between fish, aquatic habitats, and man, highlighting the challenges facing aquatic resource professionals and the methods that have been employed to resolve conflicts between those that use or have an interest in our aquatic resources. As fragile as it is beautiful, the Adirondack Region is the perfect location to explore this theme. Bordered by Mirror Lake and its namesake, Lake Placid, the Village of Lake Placid has small town charm, but all of the conveniences that a big city would provide. Whether its reliving the magic of the 1980 hockey team's "Miracle on Ice" at the Lake Placid Olympic Center, getting a panoramic view of the Adirondack high peaks from the top of the 90 meter ski jumps, fishing or kayaking in adjacent Mirror Lake, hiking a mountain trail, or enjoying a quiet dinner or shopping excursion in the various shops and restaurants that line Main Street, Lake Placid has something for everyone.

Opting out or denying discrimination? How the framework of free choice in American society influences perceptions of gender inequality.

Science.gov (United States)

Stephens, Nicole M; Levine, Cynthia S

2011-10-01

American women still confront workplace barriers (e.g., bias against mothers, inflexible policies) that hinder their advancement at the upper levels of organizations. However, most Americans fail to recognize that such gender barriers still exist. Focusing on mothers who have left the workforce, we propose that the prevalent American assumption that actions are a product of choice conceals workplace barriers by communicating that opportunities are equal and that behavior is free from contextual influence. Study 1 reveals that stay-at-home mothers who view their own workplace departure as an individual choice experience greater well-being but less often recognize workplace barriers and discrimination as a source of inequality than do mothers who do not view their workplace departure as an individual choice. Study 2 shows that merely exposing participants to a message that frames actions in terms of individual choice increases participants' belief that society provides equal opportunities and that gender discrimination no longer exists. By concealing the barriers that women still face in the workplace, this choice framework may hinder women's long-term advancement in society.

State, market and civil society: Latin American development in comparative perspective

Directory of Open Access Journals (Sweden)

Menno Vellinga

2010-06-01

Full Text Available In the 1980s Latin America made a radical break with the model of development that had been pursued by most countries on the continent for the last fifty years and implemented a new development strategy, defined along neo-liberal lines. These changes have taken place under conditions of increasing globalization, e.g. they had to be realized increasingly within globally defined parameters and structures. The relationship between the state, the market and civil society was redefined. The traditional structures of interest representation of groups and classes, their legitimacy and effectiveness underwent significant changes in many countries. In this article we will explore the nature of these changes and their consequences for state reform and the relation to problems of national development. We will do so in a comparative perspective, including experiences from South East Asia. The debate about the relationship between state, market and civil society has received a new impetus from the 2008 crisis of the international financial system and the widely spread criticism of the workings of the market capitalism that it has generated. For Latin American development the conclusions of this debate and their possible translation into concrete policies are of the utmost importance.

Symposium for Alfred Wolf's 75th birthday at American Chemical Society meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-04-02

This report contains abstracts from the symposium presented by the Division of Nuclear Chemistry and Technology of the American Chemical Society. Sessions covered the following topics: Therapeutic radionuclides--Making the right choice; Aspects of nuclear science; Nuclear structure with large gamma-ray detector arrays and their auxiliary devices; Thirty years of research in nuclear dynamics--From fission to the quark-gluon plasma; Chelated metal ions for diagnosis and therapy; Radiochemistry--Basic and applied; and Applications of small accelerators in science and industry.

Radiation protection aspects in the metallurgical examination of irradiated fuel elements

Energy Technology Data Exchange (ETDEWEB)

Janardhanan, S.; Pillai, P.M.B.; Jacob, J.; Kutty, K.N.; Wattamwar, S.B.; Mehta, S.K. (Bhabha Atomic Research Centre, Bombay (India). Health Physics Div.)

The operational safety requirements of hot cell facilities for metallurgical examination of irradiated natural and enriched uranium fuel elements are highlighted. The cell shielding is designed for handling activities equivalent of 10/sup 2/ to 10/sup 5/ curies of gamma energy of 1.3 Mev. A brief outline of the built-in design features relevant to safety assessment is also incorporated. Reference is made to some salient features of Radiometallurgy Cells at Trombay. Metallurgical operations include investigations on cladding failure of irradiated material structure and specimen preparation from hot fuel element. The radiation protection aspects presented in this paper show that handling low irradiated fuel elements in these beta-gamma cells do not cause serious operational safety problems. The procedures followed and the containment provided would adequately restrict exposure of operational staff to acceptable limits.

Arsenic precipitation from metallurgical effluents

International Nuclear Information System (INIS)

Navarro, P.; Vargas, C.; Araya, E.; Martin, I.; Alguacil, F. J.

2004-01-01

In the mining-metallurgical companies different liquid effluents are produced, which can contain a series of dissolved elements that are considered dangerous from an environmental point of view. One of these elements is the arsenic, especially in the state of oxidation +5 that can be precipitated as calcium or iron arsenate. To fulfil the environmental requests it should have in solution a content of arsenic lower than 0,5 mg/l and the obtained solid product should be very stable under the condition in which it will be stored. this work looks for the best conditions of arsenic precipitation, until achieving contents in solution lower than such mentioned concentration. Also, the stability of the precipitates was studied. (Author) 7 refs

Analytical control in metallurgical processes

International Nuclear Information System (INIS)

Coedo, A.G.; Dorado, M.T.; Padilla, I.

1998-01-01

This paper illustrates the role of analysis in enabling metallurgical industry to meet quality demands. For example, for the steel industry the demands by the automotive, aerospace, power generation, tinplate packaging industries and issue of environment near steel plants. Although chemical analysis technology continues to advance, achieving improved speed, precision and accuracy at lower levels of detection, the competitiveness of manufacturing industry continues to drive property demands at least at the same rate. Narrower specification ranges, lower levels of residual elements and economic pressures prescribe faster process routes, all of which lead to increased demands on the analytical function. These damands are illustrated by examples from several market sectors in which customer issues are considered together with ther analytical implications. (Author) 5 refs

Disillusionment of the American Dream——On An American Tragedy

Institute of Scientific and Technical Information of China (English)

管秀丽

2008-01-01

Theodore Dreiser is now regarded as one of the pre-eminent American realistic novelists of the first half of the twentieth century.an anatomist of the American Dream.In his great work An American Tragedy,Dreis- er exposes and criticizes mercilessly the corruption and black side of American society.The disillusionment of the American Dream is an important theme of the fiction.This paper illustrates "An American Tragedy" is the re- flection of disillusionment of the American Dream in the perspectives of the tragedy of a mortal,the tragedy of American society,and the tragedy of the American Dream.

Analytical study of getting clinker from metallurgical wastes

Directory of Open Access Journals (Sweden)

Володимир Петрович Кравченко

2016-07-01

Full Text Available The opportunities to get clinker (cement on the basis of 2-component mixtures of raw materials: waste slag + limestone (less than 10mm fraction unsuitable for sinter production and being a technological waste of preparing raw materials for steel production have been investigated. Chemical compositions of waste slag and limestone wastes were investigated in the central laboratory at the Illych plant. The waste slag was got at the «Ilyich» plant while waste limestone - less than 10 mm fraction - was got in the dumps of the mine group in Komsomolsk. Taking into account chemical composition fluctuations of the waste dump slags and limestone within a few percent, the optimal ratio of raw materials is 55-65% limestone waste, while it is 35-45% waste slag. The clinker quality is evaluated by its hydraulic module, which is equal to: m = 2,37 and is determined on the basis of the chemical composition of the 2-component raw material mixture. For this method of clinker production, the value of the hydraulic module is rather high; and the possibility of obtaining high-quality clinker of metallurgical wastes has been confirmed. The offered method for producing clinker makes it possible to utilize metallurgical wastes and to get substantial ecological and economic benefits

Meeting American Geriatrics Society Competencies: Are Residents Meeting Expectations for Quality Care of Older Adults?

Science.gov (United States)

Bynum, Debra L; Wilson, Lindsay A; Ong, Thuan; Callahan, Kathryn E; Dalton, Thomas; Ohuabunwa, Ugochi

2015-09-01

In order to determine how often internal medicine and family medicine residents performed specific actions related to the geriatric competencies established by the American Geriatrics Society (AGS) when caring for older hospitalized adults, a cross-sectional anonymous survey of residents at the University of North Carolina, University of Washington, Wake Forest University, Duke University, and Emory University was undertaken. Data on frequency of self-reported behaviors were analyzed, with comparisons made for different levels of training, institution, and program. A total of 375 residents responded for an overall response rate of 48%. Residents reported that they often do not demonstrate all of the AGS recommended core competencies when caring for older adults in the hospital setting. Residents report more frequently performing activities that are routinely integrated into hospital systems such as reviewing medication lists, working with an interdisciplinary team, evaluating for inappropriate bladder catheters, and evaluating for pressure ulcers. There were no consistent differences between institutions and only minor differences noted between Family Medicine and Internal Medicine residents. Operationalizing core competencies by integrating them into hospital systems' quality process indicators may prompt more consistent high-quality care and ensure systems support residents' competence. © 2015, Copyright the Authors Journal compilation © 2015, The American Geriatrics Society.

Thermo-ecological cost (TEC evaluation of metallurgical processes

Directory of Open Access Journals (Sweden)

W. Stanek

2015-01-01

Full Text Available Metallurgy represents a complex production system of fuel and mineral non-renewable resources transformation. The effectiveness of resource management in metallurgical chains depends on the applied ore grade and on the irreversibility of components of the system. TEC can be applied to measure the influence of metallurgy on the depletion of natural resources. The paper discusses the possibility of application of TEC in metallurgy and presents illustrative example concerning blast-furnace process.

Control of innovation activity in a competitive metallurgical business

Science.gov (United States)

Bogdanov, S. V.

2010-12-01

Certain competitive advantages of a manufacturer on a goods market can be provided if one creates conditions for bifurcation development of an innovation process in metallurgical business under conditions of market uncertainty of a demand for goods of a specified consumer quality and determines the technical-and-economic versions of stable operation of a production system for performing orders of metal product consumers.

An official American Thoracic Society workshop report: stem cells and cell therapies in lung biology and diseases.

Science.gov (United States)

Weiss, Daniel J; Chambers, Daniel; Giangreco, Adam; Keating, Armand; Kotton, Darrell; Lelkes, Peter I; Wagner, Darcy E; Prockop, Darwin J

2015-04-01

The University of Vermont College of Medicine and the Vermont Lung Center, in collaboration with the NHLBI, Alpha-1 Foundation, American Thoracic Society, European Respiratory Society, International Society for Cell Therapy, and the Pulmonary Fibrosis Foundation, convened a workshop, "Stem Cells and Cell Therapies in Lung Biology and Lung Diseases," held July 29 to August 1, 2013 at the University of Vermont. The conference objectives were to review the current understanding of the role of stem and progenitor cells in lung repair after injury and to review the current status of cell therapy and ex vivo bioengineering approaches for lung diseases. These are all rapidly expanding areas of study that both provide further insight into and challenge traditional views of mechanisms of lung repair after injury and pathogenesis of several lung diseases. The goals of the conference were to summarize the current state of the field, discuss and debate current controversies, and identify future research directions and opportunities for both basic and translational research in cell-based therapies for lung diseases. This conference was a follow-up to four previous biennial conferences held at the University of Vermont in 2005, 2007, 2009, and 2011. Each of those conferences, also sponsored by the National Institutes of Health, American Thoracic Society, and Respiratory Disease Foundations, has been important in helping guide research and funding priorities. The major conference recommendations are summarized at the end of the report and highlight both the significant progress and major challenges in these rapidly progressing fields.

Cost estimation and management over the life cycle of metallurgical ...

African Journals Online (AJOL)

This study investigates whether all expected costs over the life cycle of metallurgical research projects are included in initial, normal and fi nal cost estimates, and whether these costs are managed throughout a project's life cycle since there is not enough emphasis on the accurate estimation of costs and their management ...

Highlights of the metallurgical behaviour of CANDU pressure tubes

International Nuclear Information System (INIS)

Price, E.G.

1984-10-01

This paper is an overview of the service induced metallurgical changes that take place in Zircaloy-2 and Zr-2.5 wt. percent Nb pressure tubes in CANDU reactors. It incorporates the findings of an evaluation program, that followed a significant pressure tube failure at Ontario Hydro's Pickering Nuclear Generating Station, and also provides valid reasons for continued confidence in the current CANDU design

Joint American Nuclear Society and Health Physics Society Conference: Applicability of Radiation Response Models to Low Dose Protection Standards.

Science.gov (United States)

Glines, Wayne M; Markham, Anna

2018-05-01

Seventy-five years after the Hanford Site was initially created as the primary plutonium production site for atomic weapons development under the Manhattan Project, the American Nuclear Society and the Health Physics Society are sponsoring a conference from 30 September through 3 October 2018, in Pasco, Washington, titled "Applicability of Radiation Response Models to Low Dose Protection Standards." The goal of this conference is to use current scientific data to update the approach to regulating low-level radiation doses; i.e., to answer a quintessential question of radiation protection-how to best develop radiation protection standards that protect human populations against detrimental effects while allowing the beneficial uses of radiation and radioactive materials. Previous conferences (e.g., "Wingspread Conference," "Arlie Conference") have attempted to address this question; but now, almost 20 y later, the key issues, goals, conclusions, and recommendations of those two conferences remain and are as relevant as they were then. Despite the best efforts of the conference participants and increased knowledge and understanding of the science underlying radiation effects in human populations, the bases of current radiation protection standards have evolved little. This 2018 conference seeks to provide a basis and path forward for evolving radiation protection standards to be more reflective of current knowledge and understanding of low dose response models.

The Big Chill: Changes in American Politics and Society from the Late 1960s to the Present.

Science.gov (United States)

Webster, David S.

This essay looks at three kinds of changes in American society over the period from the late 1960s to the mid-1990s. First, data from the Cooperative Institutional Research Program (CIRP) are used to measure trends in college freshmen's political identification, materialism, concern for law and order, and concern for helping others. In all these…

Executive Summary of the American College of Surgeons/Surgical Infection Society Surgical Site Infection Guidelines-2016 Update.

Science.gov (United States)

Ban, Kristen A; Minei, Joseph P; Laronga, Christine; Harbrecht, Brian G; Jensen, Eric H; Fry, Donald E; Itani, Kamal M F; Dellinger, E Patchen; Ko, Clifford Y; Duane, Therese M

Guidelines regarding the prevention, detection, and management of surgical site infections (SSIs) have been published previously by a variety of organizations. The American College of Surgeons (ACS)/Surgical Infection Society (SIS) Surgical Site Infection (SSI) Guidelines 2016 Update is intended to update these guidelines based on the current literature and to provide a concise summary of relevant topics.

Simulation model for planning metallurgical treatment of large-size billets

International Nuclear Information System (INIS)

Timofeev, M.A.; Echeistova, L.A.; Kuznetsov, V.G.; Semakin, S.V.; Krivonogov, A.B.

1989-01-01

The computerized simulation system ''Ritm'' for planning metallurgical treatment of billets is developed. Three principles, specifying the organization structure of the treatment cycle are formulated as follows: a cycling principle, a priority principle and a principle of group treatment. The ''Ritm'' software consists of three independent operating systems: preparation of source data, simulation, data output

Position of the American Dietetic Association, School Nutrition Association, and Society for Nutrition Education: Comprehensive School Nutrition Services

Science.gov (United States)

Briggs, Marilyn; Mueller, Constance G.; Fleischhacker, Sheila

2010-01-01

It is the position of the American Dietetic Association (ADA), School Nutrition Association (SNA), and Society for Nutrition Education (SNE) that comprehensive, integrated nutrition services in schools, kindergarten through grade 12, are an essential component of coordinated school health programs and will improve the nutritional status, health,…

Real time information management for improving productivity in metallurgical complexes

International Nuclear Information System (INIS)

Bascur, O.A.; Kennedy, J.P.

1999-01-01

Applying the latest information technologies in industrial plants has become a serious challenge to management and technical teams. The availability of real time and historical operations information to identify the most critical part of the processing system from mechanical integrity is a must for global plant optimization. Expanded use of plant information on the desktop is a standard tool for revenue improvement, cost reduction, and adherence to production constraints. The industrial component desktop supports access to information for process troubleshooting, continuous improvement and innovation by plant and staff personnel. Collaboration between groups enables the implementation of an overall process effectiveness index based on losses due to equipment availability, production and product quality. The key to designing technology is to use the Internet based technologies created by Microsoft for its marketplace-office automation and the Web. Time derived variables are used for process analysis, troubleshooting and performance assessment. Connectivity between metallurgical complexes, research centers and their business system has become a reality. Two case studies of large integrated mining/metallurgical complexes are highlighted. (author)

LWR surveillance dosimetry improvement program: PSF metallurgical blind test results

International Nuclear Information System (INIS)

Kam, F.B.K.; Stallmann, F.W.; Guthrie, G.; McElroy, W.N.

1985-01-01

The ORR-PSF benchmark experiment was designed to simulate the surveillance capsule-pressure vessel configuration in power reactors and to test the validity of procedures which determine the radiation damage in the vessel from test results in the surveillance capsule. The PSF metallurgical blind test was initiated to give participants an opportunity to test their current embrittlement prediction methodologies. Experimental results were withheld from the participants except for the type of information which is normally contained in surveillance reports. Preliminary analysis of the PSF metallurgical blind test results shows that: (1) current prediction methodologies, as used by the PSF Blind Test participants, are adequate, falling within +- 20 0 C of the measured values for Δ NDT. None of the different methods is clearly superior; (2) the proposed revision of Reg. Guide 1.99 (Rev. 2) gives a better representation of the fluence and chemistry dependency of Δ NDT than the current version (Rev. 1); and (3) fluence rate effects can be seen but not quantified. Fluence spectral effects are too small to be detectable in this experiment. (orig.)

Assessing Clinical Microbiology Practice Guidelines: American Society for Microbiology Ad Hoc Committee on Evidence-Based Laboratory Medicine Practice Guidelines Assessment.

Science.gov (United States)

Nachamkin, Irving; Kirn, Thomas J; Westblade, Lars F; Humphries, Romney

2017-11-01

As part of the American Society for Microbiology (ASM) Evidence-Based Laboratory Medicine Practice Guidelines Committee of the Professional Practice Committee, an ad hoc committee was formed in 2014 to assess guidelines published by the committee using an assessment tool, Appraisal of Guidelines for Research Evaluation II (AGREE II). The AGREE II assessment helps reviewers determine whether published guidelines are robust, transparent, and clear in presenting practice recommendations in a standardized manner. Identifying strengths and weaknesses of practice guidelines by ad hoc assessments helps with improving future guidelines through the participation of key stakeholders. This minireview describes the development of the ad hoc committee and results from their review of several ASM best practices guidelines and a non-ASM practice guideline from the Emergency Nurses Association. Copyright © 2017 American Society for Microbiology.

Continuous moisture measurement in metallurgical coke with automatic charge correction

International Nuclear Information System (INIS)

Watzke, H.; Mehlhose, D.

1981-01-01

A process control system has been developed for automatic batching of the coke amount necessary for metallurgical processes taking into account the moisture content. The measurement is performed with a neutron moisture gage consisting of an Am-Be neutron source and a BF 3 counter. The output information of the counter is used for computer-controlled batching

Production capacity of metallurgical enterprises in modular structure of management accounting

Directory of Open Access Journals (Sweden)

Zambrzhitskaia E.S.

2017-01-01

Full Text Available This article is the result of constant research in development of management accounting at modern Russian metallurgical works. The required steps of renovation are presented for the modernization of management accounting system in the case of production capacity. The necessary factors with defined values are systematized for modern enterprises. The main ones are those which are regulate the measure of the payload of production capacity. For the purposes of effective management accounting at metallurgical enterprises it is suggested to use the system of controlling parameters which were formulated for the enterprise for production of rolls. Later in the article the necessary changes to the modular structure of management accounting business are described and expanded with new structural element – “Management of production capacity”. The suggested methodical approach will allow the company management to respond quickly to rapidly changing external environment and, as a consequence, to make effective management decisions.

Application of logistic principles in metallurgical production

Directory of Open Access Journals (Sweden)

D. Malindžák

2012-07-01

Full Text Available Metallurgical production processes (MPP consist of continuous and discrete types of technology operation, transport, manipulation and storing processes regards the flow of material and also the equipment and machines. Other specifics are: long production cycles, great inertia, tree structure of production processes (from roots up to the leaves, high level of investments etc. These characteristics resulted in some specifics of production logistics. This article deals with these specifics and explains it using the conditions of production processes of continuous slab casting, their heating in push furnaces at rolling temperature and rolling itself in hot wideband steel mill.

Quality of some Nigerian coals as a blending stock in metallurgical ...

African Journals Online (AJOL)

Lafia- Obi/foreign coals blends possess lower ash and better rheological properties compared to Chikila/foreign coal composites which have high ash and poor rheological properties. These together suggest that amongst the two Nigerian coals, Lafia-Obi is superior for blending with the foreign ones in metallurgical coke ...

An Official American Thoracic Society Workshop Report 2015. Stem Cells and Cell Therapies in Lung Biology and Diseases.

Science.gov (United States)

Wagner, Darcy E; Cardoso, Wellington V; Gilpin, Sarah E; Majka, Susan; Ott, Harald; Randell, Scott H; Thébaud, Bernard; Waddell, Thomas; Weiss, Daniel J

2016-08-01

The University of Vermont College of Medicine, in collaboration with the NHLBI, Alpha-1 Foundation, American Thoracic Society, Cystic Fibrosis Foundation, European Respiratory Society, International Society for Cellular Therapy, and the Pulmonary Fibrosis Foundation, convened a workshop, "Stem Cells and Cell Therapies in Lung Biology and Lung Diseases," held July 27 to 30, 2015, at the University of Vermont. The conference objectives were to review the current understanding of the role of stem and progenitor cells in lung repair after injury and to review the current status of cell therapy and ex vivo bioengineering approaches for lung diseases. These are all rapidly expanding areas of study that both provide further insight into and challenge traditional views of mechanisms of lung repair after injury and pathogenesis of several lung diseases. The goals of the conference were to summarize the current state of the field, discuss and debate current controversies, and identify future research directions and opportunities for both basic and translational research in cell-based therapies for lung diseases. This 10th anniversary conference was a follow up to five previous biennial conferences held at the University of Vermont in 2005, 2007, 2009, 2011, and 2013. Each of those conferences, also sponsored by the National Institutes of Health, American Thoracic Society, and respiratory disease foundations, has been important in helping guide research and funding priorities. The major conference recommendations are summarized at the end of the report and highlight both the significant progress and major challenges in these rapidly progressing fields.

American Society for Microbiology resources in support of an evidence-based approach to teaching microbiology.

Science.gov (United States)

Merkel, Susan M

2016-08-01

Numerous national reports have addressed the need for changing how science courses in higher education are taught, so that students develop a deeper understanding of critical concepts and the analytical and cognitive skills needed to address future challenges. This review presents some evidence-based approaches to curriculum development and teaching. Results from discipline-based education research indicate that it is critically important for educators to formulate learning goals, provide frequent and authentic assessments and actively engage students in their learning. Professional societies can play a role in helping to put these changes into practice. To this end, the American Society for Microbiology has developed a number of educational programs and resources, which are described here to encourage the implementation of student-centered learning in microbiology education. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

American Society for Radiation Oncology (ASTRO) and American College of Radiology (ACR) Practice Guideline for the Performance of High-Dose-Rate Brachytherapy

International Nuclear Information System (INIS)

Erickson, Beth A.; Demanes, D. Jeffrey; Ibbott, Geoffrey S.; Hayes, John K.; Hsu, I-Chow J.; Morris, David E.; Rabinovitch, Rachel A.; Tward, Jonathan D.; Rosenthal, Seth A.

2011-01-01

High-Dose-Rate (HDR) brachytherapy is a safe and efficacious treatment option for patients with a variety of different malignancies. Careful adherence to established standards has been shown to improve the likelihood of procedural success and reduce the incidence of treatment-related morbidity. A collaborative effort of the American College of Radiology (ACR) and American Society for Therapeutic Radiation Oncology (ASTRO) has produced a practice guideline for HDR brachytherapy. The guideline defines the qualifications and responsibilities of all the involved personnel, including the radiation oncologist, physicist and dosimetrists. Review of the leading indications for HDR brachytherapy in the management of gynecologic, thoracic, gastrointestinal, breast, urologic, head and neck, and soft tissue tumors is presented. Logistics with respect to the brachytherapy implant procedures and attention to radiation safety procedures and documentation are presented. Adherence to these practice guidelines can be part of ensuring quality and safety in a successful HDR brachytherapy program.

The American Society for Clinical Pathology's 2014 vacancy survey of medical laboratories in the United States.

Science.gov (United States)

Garcia, Edna; Ali, Asma M; Soles, Ryan M; Lewis, D Grace

2015-09-01

To determine the extent and distribution of workforce shortages within the nation's medical laboratories. Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2014 Vacancy Survey was conducted through collaboration between American Society for Clinical Pathology's Institute of Science, Technology, and Policy in Washington, DC, and the Evaluation, Measurement, and Assessment Department and Board of Certification in Chicago, Illinois. Data were collected via an Internet survey that was distributed to individuals who were able to report on staffing and certifications for their laboratories. Data reveal increased overall vacancy rates since 2012 for all departments surveyed except cytology and cytogenetics. Also, results show higher anticipated retirement rates for both staff and supervisors. Overall certification rates are highest among laboratory personnel in cytogenetics, hematology/coagulation, and flow cytometry departments and lowest among phlebotomy, specimen processing, and anatomic pathology. Factors such as retirement and the improving economy are driving the need for more laboratory professionals. Recruitment of qualified laboratory professionals in the workforce and students in laboratory programs will be the key in fulfilling the higher vacancies revealed from the survey results in 2014. Copyright© by the American Society for Clinical Pathology.

American Orthopaedic Society for Sports Medicine

Science.gov (United States)

... Upcoming Meetings Online Education Archived Meetings Faculty Resources Sports Medicine Fellowships Traveling Fellowship Submit an Abstract Submit ... Support AOSSM Research Publications Toggle American Journal of Sports Medicine Sports Health: A Multidisciplinary Approach Orthopaedic Journal ...

Adjuvant and Salvage Radiation Therapy After Prostatectomy: American Society for Radiation Oncology/American Urological Association Guidelines

Energy Technology Data Exchange (ETDEWEB)

Valicenti, Richard K., E-mail: Richard.valicenti@ucdmc.ucdavis.edu [Department of Radiation Oncology, University of California, Davis School of Medicine, Davis, California (United States); Thompson, Ian [Department of Urology, University of Texas Health Science Center at San Antonio, San Antonio, Texas (United States); Albertsen, Peter [Division of Urology, University of Connecticut Health Center, Farmington, Connecticut (United States); Davis, Brian J. [Department of Radiation Oncology, Mayo Medical School, Rochester, Minnesota (United States); Goldenberg, S. Larry [Department of Urologic Sciences, University of British Columbia, Vancouver, British Columbia (Canada); Wolf, J. Stuart [Department of Urology, University of Michigan, Ann Arbor, Michigan (United States); Sartor, Oliver [Department of Medicine and Urology, Tulane Medical School, New Orleans, Louisiana (United States); Klein, Eric [Glickman Urological Kidney Institute, Cleveland Clinic, Cleveland, Ohio (United States); Hahn, Carol [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Roach, Mack [Department of Radiation Oncology, University of California, San Francisco, San Francisco, California (United States); Faraday, Martha M. [Four Oaks, Inc (United States)

2013-08-01

Purpose: The purpose of this guideline was to provide a clinical framework for the use of radiation therapy after radical prostatectomy as adjuvant or salvage therapy. Methods and Materials: A systematic literature review using PubMed, Embase, and Cochrane database was conducted to identify peer-reviewed publications relevant to the use of radiation therapy after prostatectomy. The review yielded 294 articles; these publications were used to create the evidence-based guideline statements. Additional guidance is provided as Clinical Principles when insufficient evidence existed. Results: Guideline statements are provided for patient counseling, use of radiation therapy in the adjuvant and salvage contexts, defining biochemical recurrence, and conducting a restaging evaluation. Conclusions: Physicians should offer adjuvant radiation therapy to patients with adverse pathologic findings at prostatectomy (ie, seminal vesicle invastion, positive surgical margins, extraprostatic extension) and salvage radiation therapy to patients with prostate-specific antigen (PSA) or local recurrence after prostatectomy in whom there is no evidence of distant metastatic disease. The offer of radiation therapy should be made in the context of a thoughtful discussion of possible short- and long-term side effects of radiation therapy as well as the potential benefits of preventing recurrence. The decision to administer radiation therapy should be made by the patient and the multidisciplinary treatment team with full consideration of the patient's history, values, preferences, quality of life, and functional status. The American Society for Radiation Oncology and American Urological Association websites show this guideline in its entirety, including the full literature review.

Adjuvant and Salvage Radiation Therapy After Prostatectomy: American Society for Radiation Oncology/American Urological Association Guidelines

International Nuclear Information System (INIS)

Valicenti, Richard K.; Thompson, Ian; Albertsen, Peter; Davis, Brian J.; Goldenberg, S. Larry; Wolf, J. Stuart; Sartor, Oliver; Klein, Eric; Hahn, Carol; Michalski, Jeff; Roach, Mack; Faraday, Martha M.

2013-01-01

Purpose: The purpose of this guideline was to provide a clinical framework for the use of radiation therapy after radical prostatectomy as adjuvant or salvage therapy. Methods and Materials: A systematic literature review using PubMed, Embase, and Cochrane database was conducted to identify peer-reviewed publications relevant to the use of radiation therapy after prostatectomy. The review yielded 294 articles; these publications were used to create the evidence-based guideline statements. Additional guidance is provided as Clinical Principles when insufficient evidence existed. Results: Guideline statements are provided for patient counseling, use of radiation therapy in the adjuvant and salvage contexts, defining biochemical recurrence, and conducting a restaging evaluation. Conclusions: Physicians should offer adjuvant radiation therapy to patients with adverse pathologic findings at prostatectomy (ie, seminal vesicle invastion, positive surgical margins, extraprostatic extension) and salvage radiation therapy to patients with prostate-specific antigen (PSA) or local recurrence after prostatectomy in whom there is no evidence of distant metastatic disease. The offer of radiation therapy should be made in the context of a thoughtful discussion of possible short- and long-term side effects of radiation therapy as well as the potential benefits of preventing recurrence. The decision to administer radiation therapy should be made by the patient and the multidisciplinary treatment team with full consideration of the patient's history, values, preferences, quality of life, and functional status. The American Society for Radiation Oncology and American Urological Association websites show this guideline in its entirety, including the full literature review

News Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

Science.gov (United States)

2011-05-01

Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

Process for converting coal into liquid fuel and metallurgical coke

Science.gov (United States)

Wolfe, Richard A.; Im, Chang J.; Wright, Robert E.

1994-01-01

A method of recovering coal liquids and producing metallurgical coke utilizes low ash, low sulfur coal as a parent for a coal char formed by pyrolysis with a volatile content of less than 8%. The char is briquetted and heated in an inert gas over a prescribed heat history to yield a high strength briquette with less than 2% volatile content.

Results of high-energy transurethral microwave thermotherapy in patients categorized according to the American Society of Anesthesiologists operative risk classification

NARCIS (Netherlands)

D'Ancona, F. C.; van der Bij, A. K.; Francisca, E. A.; Kho, H.; Debruyne, F. M.; Kiemeney, L. A.; de la Rosette, J. J.

1999-01-01

To evaluate the relation between the American Society of Anesthesiologists (ASA) classification and response to transurethral microwave thermotherapy (TUMT) in patients with lower urinary tract symptoms and benign prostatic hyperplasia (BPH). Two hundred forty-seven patients with symptomatic BPH

Does gender bias influence awards given by societies?

Science.gov (United States)

Holmes, Mary Anne; Asher, Pranoti; Farrington, John; Fine, Rana; Leinen, Margaret S.; LeBoy, Phoebe

2011-11-01

AGU is a participant in a U.S. National Science Foundation (NSF)-funded project called Advancing Ways of Awarding Recognition in Disciplinary Societies (AWARDS), which seeks to examine whether gender bias affects selection of recipients of society awards. AGU is interested in learning why there is a higher proportion of female recipients of service and education awards over the past 2 decades. Combined with a lower rate of receipt of research awards, these results suggest that implicit (subconscious) bias in favor of male candidates still influences awardee selection. Six other professional societies (American Chemical Society, American Mathematical Society, American Society of Anesthesiologists, Mathematical Association of America, Society for Neuroscience, and Society for Industrial and Applied Mathematics) are participating in the project. Volunteers from each participant society attended an Association for Women in Science (AWIS)-sponsored workshop in May 2010 to examine data and review literature on best practices for fair selection of society awardees. A draft proposal for implementing these practices will be brought before the AGU Council and the Honors and Recognition Committee at their upcoming meetings.

Centralised process control of the metallurgical operation at Roessing, South West Africa/Namibia

International Nuclear Information System (INIS)

Thomas, R.; Erlank, B.

1987-01-01

A Honeywell TDC 2000 central process control system was installed at Roessing in 1984. The system controls the metallurgical operations from crushing to the finished product of uranium oxide and manufacture of sulphuric acid. The operation was previously controlled from nine separate local control rooms. The paper briefly reviews the design and commissioning of the control system on an operating plant and discusses the impact on manpower organisation and training needs. Development of the process control system during its first two years of operation is reviewed and a summary is given of the current status of computer control at Roessing. The impact of the new system on overall plant operation and performance efficiency is also briefly described. In conclusion, future developments of computer control and overall optimisation of metallurgical operations are reviewed

The American Society for Radiation Oncology's 2010 core physics curriculum for radiation oncology residents.

Science.gov (United States)

Xiao, Ying; Bernstein, Karen De Amorim; Chetty, Indrin J; Eifel, Patricia; Hughes, Lesley; Klein, Eric E; McDermott, Patrick; Prisciandaro, Joann; Paliwal, Bhudatt; Price, Robert A; Werner-Wasik, Maria; Palta, Jatinder R

2011-11-15

In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years. Copyright © 2011 Elsevier Inc. All rights reserved.

Discipline behaviors of Chinese American and European American mothers.

Science.gov (United States)

Hulei, Elaine; Zevenbergen, Andrea A; Jacobs, Sue C

2006-09-01

In any society, parenting beliefs are a reflection of that society's cultural values and traditions (J. U. Ogbu, 1981). Verbosity, a parenting behavior considered dysfunctional in European American culture, may not be problematic in Chinese culture. The authors recruited 31 Chinese American and 30 European American mothers and used questionnaires to measure parenting behaviors and child behavior problems. The Chinese American mothers also completed a questionnaire assessing their acculturation level. The Chinese American mothers had higher levels of verbosity than did the European American mothers; however, there were no differences between the groups in child behavior problems. The results also revealed higher levels of laxness in the Chinese American mothers compared to the European American mothers. Acculturation level did not predict verbosity or laxness levels. Results suggest that the effectiveness of a parenting style should be defined relative to cultural context.

University papers in American Nuclear Society (ANS) transactions with enrollment and degrees-III

International Nuclear Information System (INIS)

Duffey, D.; Wiggins, P.F.

1986-01-01

Statistics on nuclear engineering course offerings, enrollment, degrees, and papers published in the American Nuclear Society (ANS) Transactions were presented in 1966 at a conference at the University of West Virginia and in several subsequent publications. Since the 1970s, enrollment and degree data have been compiled by the US Department of Energy and its predecessors. These are the latest statistics. Universities, with perhaps 300 professors of nuclear engineering, continue to contribute substantially to the Transactions. Identification of nuclear engineering at universities is suffering because of reduced enrollment and much less graduate research support. This and the foreign student situation deserve serious attention by those concerned with nuclear engineering in university, government, and industrial communities

The Politics of Identity: Re-Examining the Appetite for Affirmative Action Policies in Higher Education among African-Americans in a Post-Racial Society

Science.gov (United States)

White, Tarsha D.

2014-01-01

Broad inferences have been made that the election of a Black American President indicates that America now functions in a post-racist society. This optimism has fueled a major discussion for changes in American policies which directly affect minorities; in particular, those related to affirmative action in higher education are under attack. Due to…

A thermo-metallurgical constitutive law of steels for structural mechanics

International Nuclear Information System (INIS)

Waeckel, Francois

1994-01-01

The aim of this work is to include the metallurgical behaviour of steels (and specifically their phases transformations) into thermo-mechanical studies. For this, a new model of aniso-thermal phase transformations during the cooling stage is proposed. Developed in the thermodynamics framework of simple materials with memory variables, its originality lies in the choice of the temperature time derivative T as independent variable. The identification and the transformation rates computation use the C.C.T. diagrams which are considered as families of particular solutions of evolution equations. The validation shows ability of the model to simulate all C.C.T. deductible tests. Furthermore, for some tests not included into the C.C.T., the numerical results remain good and the model, from which evolution equation form has been let free, allows to incorporate them to the identification data without modifying the C.C.T. simulation accuracy. Lastly, to take into account structural transformations mechanical effects, some currently used models have been introduced, together with the metallurgical model, in a finite element code. They allow whole quenching or welding simulations (up to residual stresses) as demonstrated by application examples. (author) [fr

Slow-release granisetron (APF530) versus palonosetron for chemotherapy-induced nausea/vomiting: analysis by American Society of Clinical Oncology emetogenicity criteria.

Science.gov (United States)

Raftopoulos, Harry; Boccia, Ralph; Cooper, William; O'Boyle, Erin; Gralla, Richard J

2015-09-01

APF530 is a novel sustained-release formulation of granisetron. In a Phase III trial, APF530 500 mg was noninferior to palonosetron 0.25 mg in preventing acute chemotherapy-induced nausea and vomiting (CINV) after moderately (MEC) or highly emetogenic chemotherapy (HEC) and delayed CINV after MEC, but not superior in preventing delayed CINV after HEC. Emetogenicity was classified by Hesketh criteria; this reanalysis uses newer American Society of Clinical Oncology criteria. Complete responses (no emesis or rescue medication) after cycle one were reanalyzed after reclassification of MEC and HEC by American Society of Clinical Oncology criteria. APF530 maintained noninferiority to palonosetron. Single-dose APF530 is a promising alternative to palonosetron for preventing acute and delayed CINV after MEC or HEC. The Clinicaltrials.gov identifier for this study is NCT00343460.

Metallurgical behavior of fine fractions of copper sulfide minerals in a combined process of modified flotation and agitated bio leaching

International Nuclear Information System (INIS)

Ibanez, J. P.; Ipinza, J.; Collao, N.; Ahlborn, G.

2007-01-01

The metallurgical behaviour of fine fraction of copper sulfide minerals of Compania Minera Quebrada Blanca S. A. was studied by concentration through flotation in aqueous media modified by alcohol followed by bio leaching of the concentrates. By using a 1% v/v of methanol, the metallurgical recovery of copper reaches 88%, while the iron recovery was 43%, the weight recovery was 18%, which indicates a high selectivity. these concentrates were then bio leached with and without nutrient medium, reaching 80% of copper recovery after 10 and 17 days, respectively. then, it is possible to conclude that this concentration-bio leaching metallurgical process is a promising route for copper recovery from the fine fraction of sulfide minerals. (Author) 24 refs

American Society of Clinical Oncology Policy Statement Update: Genetic and Genomic Testing for Cancer Susceptibility.

Science.gov (United States)

Robson, Mark E; Bradbury, Angela R; Arun, Banu; Domchek, Susan M; Ford, James M; Hampel, Heather L; Lipkin, Stephen M; Syngal, Sapna; Wollins, Dana S; Lindor, Noralane M

2015-11-01

The American Society of Clinical Oncology (ASCO) has long affirmed that the recognition and management of individuals with an inherited susceptibility to cancer are core elements of oncology care. ASCO released its first statement on genetic testing in 1996 and updated that statement in 2003 and 2010 in response to developments in the field. In 2014, the Cancer Prevention and Ethics Committees of ASCO commissioned another update to reflect the impact of advances in this area on oncology practice. In particular, there was an interest in addressing the opportunities and challenges arising from the application of massively parallel sequencing-also known as next-generation sequencing-to cancer susceptibility testing. This technology introduces a new level of complexity into the practice of cancer risk assessment and management, requiring renewed effort on the part of ASCO to ensure that those providing care to patients with cancer receive the necessary education to use this new technology in the most effective, beneficial manner. The purpose of this statement is to explore the challenges of new and emerging technologies in cancer genetics and provide recommendations to ensure their optimal deployment in oncology practice. Specifically, the statement makes recommendations in the following areas: germline implications of somatic mutation profiling, multigene panel testing for cancer susceptibility, quality assurance in genetic testing, education of oncology professionals, and access to cancer genetic services. © 2015 by American Society of Clinical Oncology.

American Society for Radiation Oncology (ASTRO) and American College of Radiology (ACR) Practice Guideline for the Transperineal Permanent Brachytherapy of Prostate Cancer

International Nuclear Information System (INIS)

Rosenthal, Seth A.; Bittner, Nathan H.J.; Beyer, David C.; Demanes, D. Jeffrey; Goldsmith, Brian J.; Horwitz, Eric M.; Ibbott, Geoffrey S.; Lee, W. Robert; Nag, Subir; Suh, W. Warren; Potters, Louis

2011-01-01

Transperineal permanent prostate brachytherapy is a safe and efficacious treatment option for patients with organ-confined prostate cancer. Careful adherence to established brachytherapy standards has been shown to improve the likelihood of procedural success and reduce the incidence of treatment-related morbidity. A collaborative effort of the American College of Radiology (ACR) and American Society for Therapeutic Radiation Oncology (ASTRO) has produced a practice guideline for permanent prostate brachytherapy. The guideline defines the qualifications and responsibilities of all the involved personnel, including the radiation oncologist, physicist and dosimetrist. Factors with respect to patient selection and appropriate use of supplemental treatment modalities such as external beam radiation and androgen suppression therapy are discussed. Logistics with respect to the brachtherapy implant procedure, the importance of dosimetric parameters, and attention to radiation safety procedures and documentation are presented. Adherence to these practice guidelines can be part of ensuring quality and safety in a successful prostate brachytherapy program.

European Respiratory Society statement

DEFF Research Database (Denmark)

Miravitlles, Marc; Dirksen, Asger; Ferrarotti, Ilaria

2017-01-01

lung disease. A large proportion of individuals affected remain undiagnosed and therefore without access to appropriate care and treatment.The most recent international statement on AATD was published by the American Thoracic Society and the European Respiratory Society in 2003. Since then there has...

American Chemical Society Student Affiliates Chapters: More Than Just Chemistry Clubs

Science.gov (United States)

Montes, Ingrid; Collazo, Carmen

2003-10-01

Chemistry educators often examine and implement various instructional techniques, such as mentoring programs, to advance learning objectives and to equip students with analytical and technical skills, as well as the skills required of chemical science professionals. Student organizations, such as an American Chemical Society Student Affiliates (SA) chapter, can create a learning environment for undergraduates by engaging them in activities that develop communication, teamwork and inquiry, analysis, and problem-solving skills within a real-world setting. The environment is student-based, has personal meaning for the learner, emphasizes a process-and-product orientation, and emphasizes evaluation. Participation in SAs enhance the traditional chemistry curriculum, complementing the learning goals and meeting learning objectives that might not otherwise be addressed in the curriculum. In this article we discuss how SA chapters enhance the educational experience of undergraduate chemical science students, help develop new chemistry professionals, and shape enthusiastic and committed future chemical science leaders.

Pain: metaphor, body, and culture in Anglo-American societies between the eighteenth and twentieth centuries.

Science.gov (United States)

Bourke, Joanna

2014-10-02

This article explores the relationship between metaphorical languages, body, and culture, and suggests that such an analysis can reveal a great deal about the meaning and experience of pain in Anglo-American societies between the eighteenth and twentieth centuries. It uses concepts within embodied cognition to speculate on how historians can write a history of sensation. Bodies are actively engaged in the linguistic processes and social interactions that constitute painful sensations. Language is engaged in a dialogue with physiological bodies and social environments. And culture collaborates in the creation of physiological bodies and metaphorical systems.

Problems of Journalism; Proceedings of the 1975 Annual Convention of the American Society of Newspaper Editors (Washington, D.C., April 16-18, 1975).

Science.gov (United States)

American Society of Newspaper Editors, Easton, PA.

This document reports the 1975 proceedings of the American Society of Newspaper Editors (ASNE) convention held in Washington, D.C., April 16-18. The contents include a list of officers and directors, past presidents of the society, and a copy of the ASNE Code of Ethics. Also contained in the document are reports on such individual sessions as…

Laboratory compliance with the American Society of Clinical Oncology/college of American Pathologists guidelines for human epidermal growth factor receptor 2 testing: a College of American Pathologists survey of 757 laboratories.

Science.gov (United States)

Nakhleh, Raouf E; Grimm, Erin E; Idowu, Michael O; Souers, Rhona J; Fitzgibbons, Patrick L

2010-05-01

To ensure quality human epidermal growth receptor 2 (HER2) testing in breast cancer, the American Society of Clinical Oncology/College of American Pathologists guidelines were introduced with expected compliance by 2008. To assess the effect these guidelines have had on pathology laboratories and their ability to address key components. In late 2008, a survey was distributed with the HER2 immunohistochemistry (IHC) proficiency testing program. It included questions regarding pathology practice characteristics and assay validation using fluorescence in situ hybridization or another IHC laboratory assay and assessed pathologist HER2 scoring competency. Of the 907 surveys sent, 757 (83.5%) were returned. The median laboratory accessioned 15 000 cases and performed 190 HER2 tests annually. Quantitative computer image analysis was used by 33% of laboratories. In-house fluorescence in situ hybridization was performed in 23% of laboratories, and 60% of laboratories addressed the 6- to 48-hour tissue fixation requirement by embedding tissue on the weekend. HER2 testing was performed on the initial biopsy in 40%, on the resection specimen in 6%, and on either in 56% of laboratories. Testing was validated with only fluorescence in situ hybridization in 47% of laboratories, whereas 10% of laboratories used another IHC assay only; 13% used both assays, and 12% and 15% of laboratories had not validated their assays or chose "not applicable" on the survey question, respectively. The 90% concordance rate with fluorescence in situ hybridization results was achieved by 88% of laboratories for IHC-negative findings and by 81% of laboratories for IHC-positive cases. The 90% concordance rate for laboratories using another IHC assay was achieved by 80% for negative findings and 75% for positive cases. About 91% of laboratories had a pathologist competency assessment program. This survey demonstrates the extent and characteristics of HER2 testing. Although some American Society of

Choosing wisely in headache medicine: the American Headache Society's list of five things physicians and patients should question.

Science.gov (United States)

Loder, Elizabeth; Weizenbaum, Emma; Frishberg, Benjamin; Silberstein, Stephen

2013-01-01

In an effort to draw attention to tests and procedures associated with low-value care in headache medicine, the American Headache Society (AHS) joined the Choosing Wisely initiative of the American Board of Internal Medicine Foundation. The AHS president appointed an ad hoc "Choosing Wisely" task force of the AHS. The committee surveyed AHS members to develop a candidate list of items for the AHS "Top 5" list of low-value care in headache medicine. Through a process of literature review and consensus, the final list of five items was chosen. Draft recommendations went through several rounds of revision and a process of outside review. The AHS Board of Directors approved the final list of "Five Things." The five recommendations approved by the AHS Board of Directors are: (1) don't perform neuroimaging studies in patients with stable headaches that meet criteria for migraine; (2) don't perform computed tomography imaging for headache when magnetic resonance imaging is available, except in emergency settings; (3) don't recommend surgical deactivation of migraine trigger points outside of a clinical trial; (4) don't prescribe opioid- or butalbital-containing medications as a first-line treatment for recurrent headache disorders; and (5) don't recommend prolonged or frequent use of over-the-counter pain medications for headache. We recommend that headache medicine specialists and other physicians who evaluate and treat headache disorders should use this list when discussing care with patients. © 2013 American Headache Society.

Achieving Speaker Gender Equity at the American Society for Microbiology General Meeting.

Science.gov (United States)

Casadevall, Arturo

2015-08-04

In 2015, the American Society for Microbiology (ASM) General Meeting essentially achieved gender equity, with 48.5% of the oral presentations being given by women. The mechanisms associated with increased female participation were (i) making the Program Committee aware of gender statistics, (ii) increasing female representation among session convener teams, and (iii) direct instruction to try to avoid all-male sessions. The experience with the ASM General Meeting shows that it is possible to increase the participation of female speakers in a relatively short time and suggests concrete steps that may be taken to achieve this at other meetings. Public speaking is very important for academic advancement in science. Historically women have been underrepresented as speakers in many scientific meetings. This article describes concrete steps that were associated with achieving gender equity at a major meeting. Copyright © 2015 Casadevall.

Preschool Multiple-Breath Washout Testing. An Official American Thoracic Society Technical Statement.

Science.gov (United States)

Robinson, Paul D; Latzin, Philipp; Ramsey, Kathryn A; Stanojevic, Sanja; Aurora, Paul; Davis, Stephanie D; Gappa, Monika; Hall, Graham L; Horsley, Alex; Jensen, Renee; Lum, Sooky; Milla, Carlos; Nielsen, Kim G; Pittman, Jessica E; Rosenfeld, Margaret; Singer, Florian; Subbarao, Padmaja; Gustafsson, Per M; Ratjen, Felix

2018-03-01

Obstructive airway disease is nonuniformly distributed throughout the bronchial tree, although the extent to which this occurs can vary among conditions. The multiple-breath washout (MBW) test offers important insights into pediatric lung disease, not available through spirometry or resistance measurements. The European Respiratory Society/American Thoracic Society inert gas washout consensus statement led to the emergence of validated commercial equipment for the age group 6 years and above; specific recommendations for preschool children were beyond the scope of the document. Subsequently, the focus has shifted to MBW applications within preschool subjects (aged 2-6 yr), where a "window of opportunity" exists for early diagnosis of obstructive lung disease and intervention. This preschool-specific technical standards document was developed by an international group of experts, with expertise in both custom-built and commercial MBW equipment. A comprehensive review of published evidence was performed. Recommendations were devised across areas that place specific age-related demands on MBW systems. Citing evidence where available in the literature, recommendations are made regarding procedures that should be used to achieve robust MBW results in the preschool age range. The present work also highlights the important unanswered questions that need to be addressed in future work. Consensus recommendations are outlined to direct interested groups of manufacturers, researchers, and clinicians in preschool device design, test performance, and data analysis for the MBW technique.

Magnetic spherules from the soils near the slag dump of the Nizhniy Tagil metallurgical plant

Directory of Open Access Journals (Sweden)

A. B. Makarov

2017-12-01

Full Text Available Magnetic spherules, which are widespread in soils, can have different origins, but spherules with cosmic origin are the most studied. At that, functioning of numerous industrial enterprises of metallurgical profile, thermal power stations, and motor transport can be their origin. According to the data of previous researchers, spherical magnetic particles in soils can serve as an indicator for quantitative assessment of erosion-accumulative phenomena. The authors studied magnetic spherules, isolated from soil samples taken near the dump of blast furnace and metallurgical slags of a large Nizhny Tagil metallurgical plant located on the left bank of the Olkhovka river, functioning since 1949. The way the dump forms is by draining slag along the slope. Consequently, adjacent territories are exposed to a significant dust load, associated with increased concentrations of a number of heavy metals: chromium, iron, manganese, vanadium, copper and zinc. The study of magnetic spherules performed for samples of soils taken at a distance of 50 and 100 m to the west of the dump showed that the content of magnetic fraction in them was 15.1 and 11.7% respectively, of the mineral part of the samples. The authors studied magnetic spherules on a scanning microscope JEOL JSM 6390LV, an at that provide their morphology and the chemical composition of magnetic spherules (18 analyzes and aggregates on their surface (5 analyzes. Based on the presence of characteristic impurity elements, there are the following varieties: zinc, manganese, vanadium, determined by the peculiarities of metallurgical processes. Low concentrations of spherules in soils do not allow considering them as a significant source of pollution of natural environment, only a slight increase in the content of heavy metals characteristic for them is possible.

Insurrections, Bank and Private Contracts: How Society shaped the Constitutional Order during the American Revolution

Directory of Open Access Journals (Sweden)

Matteo Battistini

2014-12-01

Full Text Available Looking at the revolutionary context of Pennsylvania, the essay analyzes the continuous movement of rebellions during the American Revolution in order to highlight the process of institutionalization of the constitutional order, namely the changeable power relationship that shaped society. The essay reconstructs: 1 the battle for free trade and freedom of property and the resulting rising of the mercantile class as a national elite; 2 the mercantile political project of ordering society by creating a national system of public credit based upon the institution of the public debt and the foundation of the first national bank; 3 the vicissitudes of the bank by analyzing Dissertations of Government, the Affairs of the Bank and Paper Money (1786, one of the most underrated pamphlets of Thomas Paine. By this way, the essay shows how the principle of popular sovereignty and the language of rebellion were intended to be institutionalized as part of the constitutional order that was formalized in 1787-88.

QEM*SEM: a necessary tool in the metallurgical evaluation of ore bodies

International Nuclear Information System (INIS)

Creelman, R.A.; Gottlieb, P.; Sutherland, D.; Jackson, R.

1989-01-01

The QEM*SEM system for automated image analysis of mineral samples is described. Details of the equipment are given together with information on the methods of measurement. Finally some practical applications are described where QEM*SEM has been used for the solution of metallurgical problems. 14 refs., 1 fig

SECI model and facilitation in change management in metallurgical enterprise

Directory of Open Access Journals (Sweden)

K. Grzybowska

2013-04-01

Full Text Available Organisational change management is not efficient without gaining and sharing knowledge by the members of the enterprise. Both in the conditions of relative organisational stability and in organisational chaos resulting from dynamic introduction and management of changes there is a constant need of improvement and of shaping competences and distribution of knowledge in the enterprise. The publication presents key programs of building knowledge conducted in a metallurgical enterprise.

Effect of metallurgical variables on void swelling

International Nuclear Information System (INIS)

Johnston, W.G.; Lauritzen, T.; Rosolowski, J.H.; Turkalo, A.M.

1976-01-01

The mechanism of void swelling is reviewed briefly and the anticipated effects of metallurgical variables are described. Experimental results showing the effects of metallurgical variables are reviewed, most of the work being done by simulation methods employing charged particle bombardments to simulate reactor damage. Although the early emphasis was on structural variables such as grain size, cold work and precipitates to control swelling, it now seems that the practical reduction of swelling will be achieved by modifying alloy composition. Void swelling is strongly influenced by the relative amounts of Fe, Cr, and Ni in an alloy; the amount of swelling can be varied by three orders of magnitude by changing the relative amounts of the three elements in an austenitic ternary alloy. The effect of composition on swelling of a simple ferritic alloy will also be described. The swelling of a simple austenitic alloy of Fe, Cr, and Ni can be reduced by certain minor element additions. The most effective swelling inhibitors are Si, Ti, Zr, and Nb, and combinations of Si and Ti are synergetic. Swelling reductions of two orders of magnitude have been achieved with combined additions. Predictions of swelling in commercial solid solution alloys are made on the basis of the present knowledge of the effects of major composition and minor element additions. The predictions agree with experimental results. For more complex commercial alloys, predictions are made for the effects on swelling of heat treatments that cause changes in matrix composition. In some cases, heat treatment is expected to change the peak swelling by more than a factor of ten, and to shift the peak swelling temperature by almost 100 0 C. Sensitivity of swelling to detailed matrix composition places emphasis on the need for developing understanding of the stability of structure and local composition in an irradiation environment

The definition of chronic lung disease in patients undergoing cardiac surgery: a comparison between the Society of Thoracic Surgeons and the American Thoracic Society/European Respiratory Society Classifications.

Science.gov (United States)

Henry, L; Holmes, S D; Lamberti, J; Halpin, L; Hunt, S; Ad, N

2012-12-01

Early and late outcomes following cardiac surgery may be adversely affected in patients with chronic lung disease (CLD) and the presence of CLD is definition dependent. The purpose of this study was to compare the Society of Thoracic Surgeons (STS) definitions for CLD to the modified American Thoracic Society (ATS)/European Respiratory Society (ERS) definitions in diagnosing and classifying CLD among a cohort of cardiac surgery patients. A prospectively-designed study whereby high risk patients for CLD presenting for non-emergent cardiac surgery and had a history of asthma, a 10 or more pack year history of smoking or a persistent cough were included. All patients underwent spirometry testing within two weeks of surgery. The presence and severity of CLD was coded two times: 1) STS definitions with spirometry; 2) ATS/ERS guidelines. The rate of misclassification was determined using concordance and discordance rates. Sensitivity analysis of the STS spirometry definitions was calculated against the ATS/ERS definitions and respective classifications. The discordant rate for the STS spirometry driven definitions versus the ATS/ERS definitions was 21%. Forty patients (21%) classified as no CLD by the STS spirometry definition were found to have CLD by the ATS/ERS definition. The STS classification had 68% sensitivity (84/124) when identifying any CLD and only 26% sensitivity (14/54) when identifying moderate CLD. The current STS spirometry driven definitions for CLD did not perform as well as the ATS/ERS definitions in diagnosing and classifying the degree of CLD. Consideration should be given to using the ATS/ERS definitions.

Test and Analysis of Metallurgical Converter Equipment

Directory of Open Access Journals (Sweden)

Shan Pang

2013-05-01

Full Text Available Oxygen top-blow converter is the main equipment in steel making, and its work reliability decides the security and economy of steel production. Therefore, how to design and test analysis of convertor has been an important subject of industry research. Geometric modelling and structure analysis of converter tilting device by using Pro/E program .The design Principle, basic design structure were analyzed in detail. The computer simulation software of metallurgical converter equipment and how to use it were introduced .It developed by VC++ software. The position of barycentre and moment curve in No.3 and No.4 are calculated. The converter acceleration down dip can be resolved by comparing the moment curve and center curve.

A comparison of the metallurgical behaviour of dispersion fuels with uranium silicides and U6Fe as dispersants

International Nuclear Information System (INIS)

Nazare, S.

1984-01-01

In the past few years metallurgical studies have been carried out to develop fuel dispersions with U-densities up to 7.0 Mg U m -3 . Uranium silicides have been considered to be the prime candidates as dispersants; U 6 Fe being a potential alternative on account of its higher U-density. The objective of this paper is to compare the metallurgical behaviour of these two material combinations with regard to the following aspects: (1) preparation of the compounds U 3 Si, U 3 Si 2 and U 6 Fe; (2) powder metallurgical processing to miniature fuel element plates; (3) reaction behaviour under equilibrium conditions in the relevant portions of the ternary U-Si-Al and U-Fe-Al systems; (4) dimensional stability of the fuel plates after prolonged thermal treatment; (5) thermochemical behaviour of fuel plates at temperatures near the melting point of the cladding. Based on this data, the possible advantages of each fuel combination are discussed. (author)

Participation of women in neurochemistry societies.

Science.gov (United States)

Lees, Marjorie B

2002-11-01

Women have made important scientific contributions to the field of neurochemistry, and they have also been leaders in neurochemical societies throughout the world. Here I discuss women's involvement and leadership in six neurochemistry societies: American Society for Neurochemistry, Argentine Society for Neurochemistry, International Society for Neurochemistry, European Society for Neurochemistry, Japanese Society for Neurochemistry, and Asian-Pacific Society for Neurochemistry. The number of women who have been active in these societies and the level of their activity vary considerably. Neurochemical societies in the Western hemisphere, i.e., the American and the Argentine Society for Neurochemistry, have much greater numbers of women who have held office, been on council, or engaged in other leadership activities than in the rest of the world. The limited participation of women in the Japanese Neurochemistry Society relates to Japanese cultural views and was not unexpected. However, the relatively few women leaders in the International Society for Neurochemistry was a surprise. The European Society had a somewhat better record of female participation than did the International Society. The reasons for these differences are partly cultural, but factors related to when each society was formed, how it is organized, and how elections are structured undoubtedly play a role. Further analysis of these observations would be of interest from a sociological and a women's studies point of view.

Project development for mining-metallurgical complexes for production of uranium concentrates - an analysis and a methodology

International Nuclear Information System (INIS)

Ajuria G, S.; Blanco P, B.; Pena A, J.; Manzanera Q, C.

1978-10-01

Activities comprising the development of a project for a mining-metallurgical complex for production of uranium concentrates, from sampling and evaluation of an orebody until plant start-up, are analyzed. The analysis of the orebody, characterization of the ore, bench scale and pilot plant metallurgical studies, environmental studies and economic analyses of the project are described. The mining project and mine preparation and engineering and construction of the plant are reviewed in less detail. The estimated time lapse for the development of a typical project under ideal conditions is 66 months. A bar diagram is included showing an approximate timetable for each activity. (author)

Validation of a prediction model that allows direct comparison of the Oxford Knee Score and American Knee Society clinical rating system.

Science.gov (United States)

Maempel, J F; Clement, N D; Brenkel, I J; Walmsley, P J

2015-04-01

This study demonstrates a significant correlation between the American Knee Society (AKS) Clinical Rating System and the Oxford Knee Score (OKS) and provides a validated prediction tool to estimate score conversion. A total of 1022 patients were prospectively clinically assessed five years after TKR and completed AKS assessments and an OKS questionnaire. Multivariate regression analysis demonstrated significant correlations between OKS and the AKS knee and function scores but a stronger correlation (r = 0.68, p Society of Bone & Joint Surgery.

Correlation Between the Efficiency of Machinery and Equipment and the Productivity of Workers and its Effect on the Performance of a Metallurgical Undertaking

Directory of Open Access Journals (Sweden)

Kulawik, A.

2007-01-01

Full Text Available In this paper the example of procedure of life and objectify work effectiveness analysis in metallurgical enterprise were presented. Besides, on the example of chosen units of metallurgical enterprise, results of analysis - based on methodic proposed in the article - were discussed.

American Brachytherapy Society consensus report for accelerated partial breast irradiation using interstitial multicatheter brachytherapy.

Science.gov (United States)

Hepel, Jaroslaw T; Arthur, Douglas; Shaitelman, Simona; Polgár, Csaba; Todor, Dorin; Zoberi, Imran; Kamrava, Mitchell; Major, Tibor; Yashar, Catheryn; Wazer, David E

To develop a consensus report for the quality practice of accelerated partial breast irradiation (APBI) using interstitial multicatheter brachytherapy (IMB). The American Brachytherapy Society Board appointed an expert panel with clinical and research experience with breast brachytherapy to provide guidance for the current practice of IMB. This report is based on a comprehensive literature review with emphasis on randomized data and expertise of the panel. Randomized trials have demonstrated equivalent efficacy of APBI using IMB compared with whole breast irradiation for select patients with early-stage breast cancer. Several techniques for placement of interstitial catheters are described, and importance of three-dimensional planning with appropriate optimization is reviewed. Optimal target definition is outlined. Commonly used dosing schemas include 50 Gy delivered in pulses of 0.6-0.8 Gy/h using pulsed-dose-rate technique and 34 Gy in 10 fractions, 32 Gy in eight fractions, or 30 Gy in seven fractions using high-dose-rate technique. Potential toxicities and strategies for toxicity avoidance are described in detail. Dosimetric constraints include limiting whole breast volume that receives ≥50% of prescription dose to 0.75 (>0.85 preferred), V 150  < 45 cc, and V 200  < 14 cc. Using an optimal implant technique coupled with optimal planning and appropriate dose constraints, a low rate of toxicity and a good-to-excellent cosmetic outcome of ≥90% is expected. IMB is an effective technique to deliver APBI for appropriately selected women with early-stage breast cancer. This consensus report has been created to assist clinicians in the appropriate practice of APBI using IMB. Copyright © 2017 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

The American Society for Radiation Oncology’s 2010 Core Physics Curriculum for Radiation Oncology Residents

International Nuclear Information System (INIS)

Xiao Ying; De Amorim Bernstein, Karen; Chetty, Indrin J.; Eifel, Patricia; Hughes, Lesley; Klein, Eric E.; McDermott, Patrick; Prisciandaro, Joann; Paliwal, Bhudatt; Price, Robert A.; Werner-Wasik, Maria; Palta, Jatinder R.

2011-01-01

Purpose: In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Methods and Materials: Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. Results: The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. Conclusions: The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years.

Comparative metallurgical study of thick hard coatings without cobalt

International Nuclear Information System (INIS)

Clemendot, F.; Van Duysen, J.C.; Champredonde, J.

1992-07-01

Wear and corrosion of stellite type hard coatings for valves of the PWR primary system raise important problems of contamination. Substitution of these alloys by cobalt-free hard coatings (Colmonoy 4 and 4.26, Cenium 36) should allow to reduce this contamination. A comparative study (chemical, mechanical, thermal, metallurgical), as well as a corrosion study of these coatings were carried out. The results of this characterization show that none of the studied products has globally characteristics as good as those of grade 6 Stellite currently in service

Metallurgical sessions. Second ALAMET congress (held in) Buenos Aires, Argentina, 6-10 May 1991

International Nuclear Information System (INIS)

1991-01-01

This congress was held in Buenos Aires, Argentine Republic, on May 6-10, 1991, gathering experts from all over the world. The present volume includes the papers presented at the Metallurgical Sessions - II. ALAMET Congress [es

Primary Prevention of Cervical Cancer: American Society of Clinical Oncology Resource-Stratified Guideline

Directory of Open Access Journals (Sweden)

Silvina Arrossi

2017-10-01

Full Text Available Purpose: To provide resource-stratified (four tiers, evidence-based recommendations on the primary prevention of cervical cancer globally. Methods: The American Society of Clinical Oncology convened a multidisciplinary, multinational panel of oncology, obstetrics/gynecology, public health, cancer control, epidemiology/biostatistics, health economics, behavioral/implementation science, and patient advocacy experts. The Expert Panel reviewed existing guidelines and conducted a modified ADAPTE process and a formal consensus-based process with additional experts (consensus ratings group for one round of formal ratings. Results: Existing sets of guidelines from five guideline developers were identified and reviewed; adapted recommendations formed the evidence base. Five systematic reviews, along with cost-effectiveness analyses, provided evidence to inform the formal consensus process, which resulted in agreement of ≥ 75%. Recommendations: In all resource settings, two doses of human papillomavirus vaccine are recommended for girls age 9 to 14 years, with an interval of at least 6 months and possibly up to 12 to 15 months. Individuals with HIV positivity should receive three doses. Maximal and enhanced settings: if girls are age ≥ 15 years and received their first dose before age 15 years, they may complete the series; if no doses were received before age 15 years, three doses should be administered; in both scenarios, vaccination may be through age 26 years. Limited and basic settings: if sufficient resources remain after vaccinating girls age 9 to 14 years, girls who received one dose may receive additional doses between age 15 and 26 years. Maximal, enhanced, and limited settings: if ≥ 50% coverage in the priority female target population, sufficient resources, and cost effectiveness, boys may be vaccinated to prevent other noncervical human papillomavirus–related cancers and diseases. Basic settings: vaccinating boys is not recommended

Primary Prevention of Cervical Cancer: American Society of Clinical Oncology Resource-Stratified Guideline.

Science.gov (United States)

Arrossi, Silvina; Temin, Sarah; Garland, Suzanne; Eckert, Linda O'Neal; Bhatla, Neerja; Castellsagué, Xavier; Alkaff, Sharifa Ezat; Felder, Tamika; Hammouda, Doudja; Konno, Ryo; Lopes, Gilberto; Mugisha, Emmanuel; Murillo, Rául; Scarinci, Isabel C; Stanley, Margaret; Tsu, Vivien; Wheeler, Cosette M; Adewole, Isaac Folorunso; de Sanjosé, Silvia

2017-10-01

To provide resource-stratified (four tiers), evidence-based recommendations on the primary prevention of cervical cancer globally. The American Society of Clinical Oncology convened a multidisciplinary, multinational panel of oncology, obstetrics/gynecology, public health, cancer control, epidemiology/biostatistics, health economics, behavioral/implementation science, and patient advocacy experts. The Expert Panel reviewed existing guidelines and conducted a modified ADAPTE process and a formal consensus-based process with additional experts (consensus ratings group) for one round of formal ratings. Existing sets of guidelines from five guideline developers were identified and reviewed; adapted recommendations formed the evidence base. Five systematic reviews, along with cost-effectiveness analyses, provided evidence to inform the formal consensus process, which resulted in agreement of ≥ 75%. In all resource settings, two doses of human papillomavirus vaccine are recommended for girls age 9 to 14 years, with an interval of at least 6 months and possibly up to 12 to 15 months. Individuals with HIV positivity should receive three doses. Maximal and enhanced settings: if girls are age ≥ 15 years and received their first dose before age 15 years, they may complete the series; if no doses were received before age 15 years, three doses should be administered; in both scenarios, vaccination may be through age 26 years. Limited and basic settings: if sufficient resources remain after vaccinating girls age 9 to 14 years, girls who received one dose may receive additional doses between age 15 and 26 years. Maximal, enhanced, and limited settings: if ≥ 50% coverage in the priority female target population, sufficient resources, and cost effectiveness, boys may be vaccinated to prevent other noncervical human papillomavirus-related cancers and diseases. Basic settings: vaccinating boys is not recommended. It is the view of the American Society of Clinical Oncology that

Possibilities of Formation of Dioxins and Furans in Metallurgical Processes as well as Methods of their Reduction

Directory of Open Access Journals (Sweden)

Holtzer, M.

2007-01-01

Full Text Available The metallurgical industry, among others, generates various kinds of wastes: gaseous, dusts, wastes and sewage. Special attention of the European Union is directed towards the elimination or significant reduction of the gaseous-dust contamination emissions including the most hazardous compounds, such as dioxins and furans. In the article the sources of dioxins and furans in metallurgical industry are described along with the reduction methods of these pollutants. Particularly the activities recommended as the Best Available Techniques (BAT in order to reduce the PCDD/PCDF emission from sintering processes, non-ferrous metallurgy and foundry engineering have been presented.

Genitourinary syndrome of menopause: new terminology for vulvovaginal atrophy from the International Society for the Study of Women's Sexual Health and the North American Menopause Society.

Science.gov (United States)

Portman, David J; Gass, Margery L S

2014-10-01

In 2012, the Board of Directors of the International Society for the Study of Women's Sexual Health (ISSWSH) and the Board of Trustees of The North American Menopause Society (NAMS) acknowledged the need to review current terminology associated with genitourinary tract symptoms related to menopause. The 2 societies cosponsored a terminology consensus conference, which was held in May 2013. Members of the consensus conference agreed that the term genitourinary syndrome of menopause (GSM) is a medically more accurate, all-encompassing, and publicly acceptable term than vulvovaginal atrophy. GSM is defined as a collection of symptoms and signs associated with a decrease in estrogen and other sex steroids involving changes to the labia majora/minora, clitoris, vestibule/introitus, vagina, urethra and bladder. The syndrome may include but is not limited to genital symptoms of dryness, burning, and irritation; sexual symptoms of lack of lubrication, discomfort or pain, and impaired function; and urinary symptoms of urgency, dysuria and recurrent urinary tract infections. Women may present with some or all of the signs and symptoms, which must be bothersome and should not be better accounted for by another diagnosis. The term was presented and discussed at the annual meeting of each society. The respective Boards of NAMS and ISSWSH formally endorsed the new terminology--genitourinary syndrome of menopause (GSM)--in 2014.

The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

OpenAIRE

Mohammed Sabbar Abdulbaqi

2017-01-01

Saul Bellow (1915 –2005) is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976). He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956) in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand an...

The two faces of coal : uncertainty the common prospect for metallurgical and thermal coal

International Nuclear Information System (INIS)

Zlotnikov, D.

2010-01-01

Although the methods of producing thermal and metallurgical coal are the same, metallurgical coal is destined to cross the world for steel manufacturing and thermal coal is destined for power plants close to where it was mined. This article discussed the factors influencing the price of these 2 coals. The production of thermal coal can remain steady during an economic crisis because coal-fired power plants generally provide low-cost-base-load electricity that remains stable during economic cycles. However, the demand for metallurgical coal is more volatile during an economic crisis because it is directly related to the demand for steel products in the construction and automotive industry, which are very sensitive to the state of the economy. There have been recent indications that Canada's export market for thermal coal is on the rise. In 2008, China became a net importer of coking coal. China's need for more coal to fuel its growing economy despite the global economic slowdown has meant that producers are diverting excess supply from European markets to China. Higher-end thermal coal offers low sulphur content and higher energy content, both desirable traits for power utilities facing strict emissions control. In addition to having huge reserves of very high-quality coal that is becoming increasingly important to China, Canada has the advantage of having the available transportation capacity in its west coast terminals and on its rail network. 3 figs.

2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

Science.gov (United States)

Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

2016-12-01

Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

Some results of medical researches at Ulba Metallurgical Plant

Energy Technology Data Exchange (ETDEWEB)

Artemieva, G.I.; Novikov, V.G.; Savchuk, V.V. [Ulba Metallurgical Plant, Ust-Kamenogorsk (Kazakhstan)

1998-01-01

The results of 45-years medical researches at beryllium production of Ulba Metallurgical Plant are summarized in this report. Statistic data on different kinds of occupational diseases, related to beryllium production and the dynamics of changing occupational diseases with the development of beryllium production, are given there. Data on average duration of life of occupational disease patients are presented in the report. It includes the description of problems, related to berylliosis diagnosis. Issues, connected to beryllium production effect on health of man, located nearby beryllium production are also discussed there as well. (author)

The American University of Beirut

DEFF Research Database (Denmark)

Bertelsen, Rasmus Gjedssø

2016-01-01

with American society through its board of trustees. American civil society has been a major financial partner since the missionary days to modern day foundation philanthropy. American business has supported the university and recruited its graduates. American government has supported the university financially...... and politically. The chapter compares the transnational relations of the AUB, the other classical American overseas universities with missionary roots in the Middle East (AUC and LAU), the more than 20 American higher education institutions founded in China around 1900 (which did not survive the Korean War...

Regional distribution of the metallurgical industry in the Czech Republic

OpenAIRE

T. Sadilek

2017-01-01

The aim of the article is to present the regional distribution of the metallurgical industry in the Czech Republic and to describe the specific factors which determine the localization of the industry in Czech regions. In order to achieve that goal, traditional tools of regional analysis are used, such as concentration analysis, used in business-to-business marketing, which does not describe the absolute size of the industry, but its relative size, focusing on the relation between the employe...

NASA/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1985. [Space Stations and Their Environments

Science.gov (United States)

Chilton, R. G. (Editor); Williams, C. E. (Editor)

1986-01-01

The 1985 NASA/ASEE Summer Faculty Fellowship Research Program was conducted by Texas A&M University and the Johnson Space Center. The ten week program was operated under the auspices of the American Society for Engineering Education (ASEE). The faculty fellows spent the time at JSC engaged in research projects commensurate with their interests and background and worked in collaboration with NASA/JSC colleagues. This document is a compilation of the final reports of their research during the summer of 1985.

Recognition of American Physiological Society members whose research publications had a significant impact on the discipline of physiology.

Science.gov (United States)

Tipton, Charles M

2013-03-01

Society members whose research publication during the past 125 yr had an important impact on the discipline of physiology were featured at the American Physiological Society (APS)'s 125th Anniversary symposium. The daunting and challenging task of identifying and selecting significant publications was assumed by the Steering Committee of the History of Physiology Interest Group, who requested recommendations and rationales from all Sections, select Interest Groups, and active senior APS members. The request resulted in recommendations and rationales from nine Sections, one Interest Group, and 28 senior members, identifying 38 publications and 43 members for recognition purposes. The publication recommendations included 5 individuals (Cournand, Erlanger, Gasser, Hubel, and Wiesel) whose research significantly contributed to their selection for the Nobel Prize in Medicine or Physiology, 4 individuals who received multiple recommendations [i.e., Cannon (3), Curran (2), Fenn (3), and Hamilton (2)], and 11 members who had been APS Presidents. Of the recommended articles, 33% were from the American Journal of Physiology, with the earliest being published in 1898 (Cannon) and the latest in 2007 (Sigmund). For the brief oral presentations, the History of Physiology Steering Committee selected the first choices of the Sections or Interest Group, whereas rationales and representation of the membership were used for the presentations by senior members.

AUTOMATION OF OPERATIONAL CONTROL OF DATA FLOWS OF THE METALLURGICAL ENTERPRISE ORGANIZATIONAL STRUCTURE

Directory of Open Access Journals (Sweden)

A. N. Chichko

2006-01-01

Full Text Available New method for creation of models of operative control of enterprise is offered. The computer variant of the organizational structure, based on analysis of the charging dynamics of control units, is offered and illustrated at the example of one of organizational structures of Belorussian metallurgical works.

The American Society of Pediatric Hematology/Oncology workforce assessment: Part 2-Implications for fellowship training.

Science.gov (United States)

Leavey, P J; Hilden, J M; Matthews, D; Dandoy, C; Badawy, S M; Shah, M; Wayne, A S; Hord, J

2018-02-01

The American Society of Pediatric Hematology/Oncology (ASPHO) solicited information from division directors and fellowship training program directors to capture pediatric hematology/oncology (PHO) specific workforce data of 6 years (2010-2015), in response to an increase in graduating fellows during that time. Observations included a stable number of physicians and advanced practice providers (APPs) in clinical PHO, an increased proportion of APPs hired compared to physicians, and an increase in training-level first career positions. Rapid changes in the models of PHO care have significant implications to current and future trainees and require continued analysis to understand the evolving discipline of PHO. © 2017 Wiley Periodicals, Inc.

American Society for Pain Management nursing position statement: pain management in patients with substance use disorders.

Science.gov (United States)

Oliver, June; Coggins, Candace; Compton, Peggy; Hagan, Susan; Matteliano, Deborah; Stanton, Marsha; St Marie, Barbara; Strobbe, Stephen; Turner, Helen N

2012-10-01

The American Society for Pain Management Nursing (ASPMN) has updated its position statement on managing pain in patients with substance use disorders. This position statement is endorsed by the International Nurses Society on Addictions (IntNSA) and includes clinical practice recommendations based on current evidence. It is the position of ASPMN and IntNSA that every patient with pain, including those with substance use disorders, has the right to be treated with dignity, respect, and high-quality pain assessment and management. Failure to identify and treat the concurrent conditions of pain and substance use disorders will compromise the ability to treat either condition effectively. Barriers to caring for these patients include stigmatization, misconceptions, and limited access to providers skilled in these two categories of disorders. Topics addressed in this position statement include the scope of substance use and related disorders, conceptual models of addiction, ethical considerations, addiction risk stratification, and clinical recommendations.

Metallurgical flow recognition by random signal analysis of stress wave emissions

International Nuclear Information System (INIS)

Woodward, B.

1973-01-01

The present study involves detailed random signal analysis of individual 'bursts' of emission with objective of 'reading' their frequency spectra to identify specific metallurgical mechanisms. Mild steel unnotched testpieces were used in the early stages of development of this research. From a fracture mechanics point of view this research could lead to a powerful nondestructive testing device allowing identification of interior, instead of only surface, deformation mechanisms. (author)

Image Guided Cervical Brachytherapy: 2014 Survey of the American Brachytherapy Society

Energy Technology Data Exchange (ETDEWEB)

Grover, Surbhi, E-mail: Surbhi.grover@uphs.upenn.edu [Department of Radiation Oncology, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania (United States); Harkenrider, Matthew M. [Department of Radiation Oncology, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Cho, Linda P. [Department of Radiation Oncology, Brigham & Women' s Hospital/Dana-Farber Cancer Institute, Boston, Massachusetts (United States); Erickson, Beth [Department Radiation Oncology, Froedtert Hospital and Medical College of Wisconsin, Milwaukee, Wisconsin (United States); Small, Christina [Department of Public Health Sciences, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Small, William [Department of Radiation Oncology, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Viswanathan, Akila N. [Department of Radiation Oncology, Brigham & Women' s Hospital/Dana-Farber Cancer Institute, Boston, Massachusetts (United States)

2016-03-01

Purpose: To provide an update of the 2007 American brachytherapy survey on image-based brachytherapy, which showed that in the setting of treatment planning for gynecologic brachytherapy, although computed tomography (CT) was often used for treatment planning, most brachytherapists used point A for dose specification. Methods and Materials: A 45-question electronic survey on cervical cancer brachytherapy practice patterns was sent to all American Brachytherapy Society members and additional radiation oncologists and physicists based in the United States between January and September 2014. Responses from the 2007 survey and the present survey were compared using the χ{sup 2} test. Results: There were 370 respondents. Of those, only respondents, not in training, who treat more than 1 cervical cancer patient per year and practice in the United States, were included in the analysis (219). For dose specification to the target (cervix and tumor), 95% always use CT, and 34% always use MRI. However, 46% use point A only for dose specification to the target. There was a lot of variation in parameters used for dose evaluation of target volume and normal tissues. Compared with the 2007 survey, use of MRI has increased from 2% to 34% (P<.0001) for dose specification to the target. Use of volume-based dose delineation to the target has increased from 14% to 52% (P<.0001). Conclusion: Although use of image-based brachytherapy has increased in the United States since the 2007 survey, there is room for further growth, particularly with the use of MRI. This increase may be in part due to educational initiatives. However, there is still significant heterogeneity in brachytherapy practice in the United States, and future efforts should be geared toward standardizing treatment.

Tweeting the Meeting: Twitter Use at The American Society of Breast Surgeons Annual Meeting 2013-2016.

Science.gov (United States)

Attai, Deanna J; Radford, Diane M; Cowher, Michael S

2016-10-01

Twitter social media is being used to disseminate medical meeting information. Meeting attendees and other interested parties have the ability to follow and participate in conversations related to meeting content. We analyzed Twitter activity generated from the 2013-2016 American Society of Breast Surgeons Annual Meetings. The Symplur Signals database was used to determine number of tweets, tweets per user, and impressions for each meeting. The number of unique physicians, patients/caregivers/advocates, and industry participants was determined. Physician tweeters were cross-referenced with membership and attendance rosters. Tweet transcripts were analyzed for content and tweets were categorized as either scientific, social, administrative, industry promotion, or irrelevant. From 2013 to 2016, the number of tweets increased by 600 %, the number of Twitter users increased by 450 %, and the number of physician tweeters increased by 457 %. The number of impressions (tweets × followers) increased from more than 3.5 million to almost 20.5 million, an increase of 469 %. The majority of tweets were informative (70-80 %); social tweets ranged from 13 to 23 %. A small percentage (3-6 %) of tweets were related to administrative matters. There were very few industry or irrelevant tweets. Twitter social media use at the American Society of Breast Surgeons annual meeting showed a substantial increase during the time period evaluated. The use of Twitter during professional meetings is a tremendous opportunity to share information. The authors feel that medical conference organizers should encourage Twitter participation and should be educating attendees on the proper use of Twitter.

Nuclear reactor pressure vessel surveillance capsule examinations. Application of American Society for Testing and Materials Standards

International Nuclear Information System (INIS)

Perrin, J.S.

1978-01-01

A series of pressure vessel surveillance capsules is installed in each commercial nuclear power plant in the United States. A capsule typically contains neutron dose meters, thermal monitors, tensile specimens, and Charpy V-notch impact specimens. In order to determine property changes of the pressure vessel resulting from irradiation, surveillance capsules are periodically removed during the life of a reactor and examined. There are numerous standards, regulations, and codes governing US pressure vessel surveillance capsule programmes. These are put out by the US Nuclear Regulatory Commission, the Boiler and Pressure Vessel Committee of the American Society of Mechanical Engineers, and the American Society for Testing and Materials (ASTM). A majority of the pertinent ASTM standards are under the jurisdiction of ASTM Committee E-10 on Nuclear Applications and Measurements of Radiation Effects. The standards, regulations, and codes pertaining to pressure vessel surveillance play an important role in ensuring reliability of the nuclear pressure vessels. ASTM E 185-73 is the Standard Recommended Practice for Surveillance Tests for Nuclear Reactors. This standard recommends procedures for both the irradiation and subsequent testing of surveillance capsules. ASTM E 185-73 references many additional specialized ASTM standards to be followed in specific areas of a surveillance capsule examination. A key element of surveillance capsule programmes is the Charpy V-notch impact test, used to define curves of fracture behaviour over a range of temperatures. The data from these tests are used to define the adjusted reference temperature used in determining pressure-temperature operating curves for a nuclear power plant. (author)

Measures to restore metallurgical mine wasteland using ecological restoration technologies: A case study at Longnan Rare Earth Mine

Science.gov (United States)

Rao, Yunzhang; Gu, Ruizhi; Guo, Ruikai; Zhang, Xueyan

2017-01-01

Whereas mining activities produce the raw materials that are crucial to economic growth, such activities leave extensive scarring on the land, contributing to the waste of valuable land resources and upsetting the ecological environment. The aim of this study is therefore to investigate various ecological technologies to restore metallurgical mine wastelands. These technologies include measures such as soil amelioration, vegetation restoration, different vegetation planting patterns, and engineering technologies. The Longnan Rare Earth Mine in the Jiangxi Province of China is used as the case study. The ecological restoration process provides a favourable reference for the restoration of a metallurgical mine wasteland.

Explosion bonding of dissimilar materials for fabricating APS front end components: Analysis of metallurgical and mechanical properties and UHV applications

International Nuclear Information System (INIS)

Li, Yuheng; Shu, Deming; Kuzay, T.M.

1994-01-01

The front end beamline section contains photon shutters and fixed masks. These components are made of OFHC copper and GlidCOP AL-15. Stainless steels (304 or 316) are also used for connecting photon shutters and fixed masks to other components that operate in the ultrahigh vacuum system. All these dissimilar materials need to be joined together. However, bonding these dissimilar materials is very difficult because of their different mechanical and thermal properties and incompatible metallurgical properties. Explosion bonding is a bonding method in which the controlled energy of a detonating explosive is used to create a metallurgical bond between two or more similar or dissimilar materials. No intermediate filler metal, for example, a brazing compound or soldering alloy, is needed to promote bonding, and no external heat need be applied. A study of the metallurgical and mechanical properties and YGV applications of GlidCop AL-15, OFHC copper, and 304 stainless steel explosion-bonded joints has been done. This report contains five parts: an ultrasonic examination of explosion-bonded joints and a standard setup; mechanical-property and thermal-cycle tests of GlidCop AL-15/304 stainless steel explosion-bonded joints; leak tests of a GlidCop AL-15/304 stainless steel explosion-bonded interfaces for UHV application; metallurgical examination of explosion-bonded interfaces and failure analysis, and discussion and conclusion

Metallurgical bond between magnesium AZ91 alloy and aluminium plasma sprayed coatings

Czech Academy of Sciences Publication Activity Database

Kubatík, Tomáš František; Pala, Zdeněk; Neufuss, Karel; Vilémová, Monika; Mušálek, Radek; Stoulil, J.; Slepička, P.; Chráska, Tomáš

2015-01-01

Roč. 282, November (2015), s. 163-170 ISSN 0257-8972 R&D Projects: GA ČR(CZ) GP14-31538P Institutional support: RVO:61389021 Keywords : Plasma spraying * AZ91 magnesium alloy * Aluminium * Metallurgical bond * X-ray diffraction Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 2.139, year: 2015 http://www.sciencedirect.com/science/article/pii/S0257897215303297

Study of the Metallurgical Aspects of Steel Micro-Alloying by Titan

Directory of Open Access Journals (Sweden)

Kijac, J.

2006-01-01

Full Text Available The metal properties upgrading applying it’s alloying with the simultaneous limitation of the impurities represents a prospective possibility of the metallurgical production further development. The interaction of the alloying substance active element with oxygen in metal and adjacent multiphase environment occurs under the actual conditions. Present paper is oriented particularly to the thermodynamic aspects of deoxygenation by titan in process of production of micro alloyed low carbon steel in two plants (oxygen converter 1-OC1 and 2-OC2 with the different effect of micro-alloy exploitation. Analysis of the effect of the metallurgical factors on the titan smelting loss in micro-alloyed steel production points at the need to master the metal preparation for the alloying and especially has got the decisive effect upon the oxidizing ability and rate of the slag phase availability. When comparing the micro-alloying matter yield among the individual production units, disclosed have been better results obtained in plant OC 2. Confirmed has been the effect of the slag amount (average amount of 7,3 t at OC 1 and 5,83 t at OC 2 and its quality during the steel tapping as one among the most significant factors affecting the alloying process and which also represent its oxidizing potential.

Conservation of mining and metallurgic arachaeologic wooden objects by impregnation and radiation curing

International Nuclear Information System (INIS)

Schaudy, R.; Slais, E.; Eibner, C.

1983-05-01

The conservation of mining and metallurgic archaeologic wooden objects of different grade of destruction by impregnation with radiation-curable impregnating agents followed by in-situ-curing with gamma rays is described. Dry objects have been consolidated after cautious cleaning, whereas wet findings had to be freezedried first. The results are discussed. (Author) [de

Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys

International Nuclear Information System (INIS)

Chirita, G.; Soares, D.; Cruz, D.; Silva, F. S.; Stefanescu, I.

2008-01-01

This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting)

The American Society for Radiation Oncology's 2010 Core Physics Curriculum for Radiation Oncology Residents

Energy Technology Data Exchange (ETDEWEB)

Xiao Ying, E-mail: ying.xiao@jefferson.edu [Thomas Jefferson University Hospital, Philadelphia, PA (United States); De Amorim Bernstein, Karen [Montefiore Medical Center, Bronx, NY (United States); Chetty, Indrin J. [Henry Ford Health System, Detroit, MI (United States); Eifel, Patricia [M. D. Anderson Cancer Center, Houston, TX (United States); Hughes, Lesley [Cooper University Hospital, Camden, NJ (United States); Klein, Eric E. [Washington University, Saint Louis, MO (United States); McDermott, Patrick [William Beaumont Hospital, Royal Oak, MI (United States); Prisciandaro, Joann [University of Michigan, Ann Arbor, MI (United States); Paliwal, Bhudatt [University of Wisconsin, Madison, WI (United States); Price, Robert A. [Fox Chase Cancer Center, Philadelphia, PA (United States); Werner-Wasik, Maria [Thomas Jefferson University Hospital, Philadelphia, PA (United States); Palta, Jatinder R. [University of Florida, Gainesville, FL (United States)

2011-11-15

Purpose: In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Methods and Materials: Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. Results: The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. Conclusions: The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years.

Atopic Dermatitis Guideline. Position Paper from the Latin American Society of Allergy, Asthma and Immunology

Directory of Open Access Journals (Sweden)

Jorge Sánchez

2014-06-01

Full Text Available As in other regions, the incidence of atopic dermatitis in Latin America has been increasing in recent years. Although there are several clinical guidelines, many of their recommendations cannot be universal since they depend on the characteristics of each region. Thus, we decided to create a consensus guideline on atopic dermatitis applicable in Latin America and other tropical regions, taking into account socio-economic, geographical, cultural and health care system characteristics. The Latin American Society of Allergy Asthma and Immunology (SLAAI conducted a systematic search for articles related to the pathophysiology, diagnosis and treatment of dermatitis using various electronic resources such as Google, Pubmed, EMBASE (Ovid and Cochrane data base. We have also looked for all published articles in Latin America on the subject using LILACS (Latin American and Caribbean Literature on Health Sciences database. Each section was reviewed by at least two members of the committee, and the nal version was subsequently approved by all of them, using the Delphi methodology for consensus building. Afterward, the nal document was shared for external evaluation with physicians, specialists (allergists, dermatologists and pediatricians, patients and academic institutions such as universities and scienti c societies related to the topic. All recommendations made by these groups were taken into account for the nal drafting of the document. There are few original studies conducted in Latin America about dermatitis; however, we were able to create a practical guideline for Latin America taking into account the particularities of the region. Moreover, the integral management was highlighted including many of the recommendations from different participants in the health care of this disease (patients, families, primary care physicians and specialists. This practical guide presents a concise approach to the diagnosis and management of atopic dermatitis that

Atopic dermatitis guideline. Position paper from the Latin American Society of Allergy, Asthma and Immunology.

Science.gov (United States)

Sánchez, Jorge; Páez, Bruno; Macías, A; Olmos, C; de Falco, A

2014-01-01

As in other regions, the incidence of atopic dermatitis in Latin America has been increasing in recent years. Although there are several clinical guidelines, many of their recommendations cannot be universal since they depend on the characteristics of each region. Thus, we decided to create a consensus guideline on atopic dermatitis applicable in Latin America and other tropical regions, taking into account socio-economic, geographical, cultural and health care system characteristics. The Latin American Society of Allergy Asthma and Immunology (SLAAI) conducted a systematic search for articles related to the pathophysiology, diagnosis and treatment of dermatitis using various electronic resources such as Google, Pubmed, EMBASE (Ovid) and Cochrane data base. We have also looked for all published articles in Latin America on the subject using LILACS (Latin American and Caribbean Literature on Health Sciences) database. Each section was reviewed by at least two members of the committee, and the final version was subsequently approved by all of them, using the Delphi methodology for consensus building. Afterward, the final document was shared for external evaluation with physicians, specialists (allergists, dermatologists and pediatricians), patients and academic institutions such as universities and scientific societies related to the topic. All recommendations made by these groups were taken into account for the final drafting of the document. There are few original studies conducted in Latin America about dermatitis; however, we were able to create a practical guideline for Latin America taking into account the particularities of the region. Moreover, the integral management was highlighted including many of the recommendations from different participants in the health care of this disease (patients, families, primary care physicians and specialists). This practical guide presents a concise approach to the diagnosis and management of atopic dermatitis that can be

Wear and corrosion performance of metallurgical coatings in sodium

International Nuclear Information System (INIS)

Johnson, R.N.; Farwick, D.G.

1980-01-01

The friction, wear, and corrosion performance of several metallurgical coatings in 200 to 650 0 C sodium are reviewed. Emphasis is placed on those coatings which have successfully passed the qualification tests necessary for acceptance in breeder reactor environments. Tests include friction, wear, corrosion, thermal cycling, self-welding, and irradiation exposure under as-prototypic-as-possible service conditions. Materials tested were coatings of various refractory metal carbides in metallic binders, nickel-base and cobalt-base alloys and intermetallic compounds such as the aluminides and borides. Coating processes evaluated included plasma spray, detonation gun, sputtering, spark-deposition, and solid-state diffusion

Publications Rates for Podium and Poster Presentations from the American Orthopaedic Foot & Ankle Society.

Science.gov (United States)

Williams, Benjamin R; Kunas, Grace C; Deland, Jonathan T; Ellis, Scott J

2017-01-01

National orthopaedic meetings are used to disseminate current research through podium and poster abstract presentations. Not all of these abstracts go on to full-text journal publication. The purpose of this study was to determine the publication rates of podium and poster presentations from the American Orthopaedic Foot & Ankle Society (AOFAS) annual meetings between 2008 and 2012. All accepted podium and poster abstracts from the 2008-2012 AOFAS annual meetings were compiled from the AOFAS office, Physician Resource Center website, and hardcopy meeting programs. PubMed and Google Scholar searches were performed for journal publications using key words in the presentation abstracts and authors' names. Full-text journal publication rates for the presentations were calculated per year, as were the most common journals of publication. Overall full-text publication rate was 73.7% for podium presentations and 55.8% for posters. Podium presentations were published in a journal significantly more often than posters ( P poster presentations, respectively ( P = .124). The most common journal for podium and poster publications was Foot & Ankle International. Podium abstracts were significantly more likely to be published compared to posters. The AOFAS overall full-text journal publication rate was one of the higher reported rates compared with other national orthopedic society meetings, which have ranged from 34% to 73%.

Using social media to create a professional network between physician-trainees and the American Society of Nephrology.

Science.gov (United States)

Shariff, Afreen I; Fang, Xiangming; Desai, Tejas

2013-07-01

Twitter is the fastest growing social media network. It offers participants the ability to network with other individuals. Medical societies are interested in helping individuals network to boost recruitment, encourage collaboration, and assist in job placement. We hypothesized that the American Society of Nephrology (ASN) successfully used Twitter to create a network between participants and itself to stay connected with its members. Tweets from 3 Twitter networking sessions during Kidney Week 2011 were analyzed for content. These messages were used to create a network between all participants of the networking sessions. The network was analyzed for strength and influence by calculating clustering coefficients (CC) and eigenvector centrality (EC) scores, respectively. Eight moderators and 9 trainees authored 376 Twitter messages. Most tweets by trainees (64%) and moderators (61%) discussed 1 of 3 themes: networking, education, or navigating Kidney Week 2011. A total of 25 online network connections were established during the 3 sessions; 20% were bidirectional. The CC for the network was 0.300. All moderators formed at least 1 connection, but 7 of the 9 trainees failed to make any connections. ASN made 5 unidirectional and 0 bidirectional connections with a low EC of 0.108. ASN was unable to form powerful connections with trainees through Twitter, but medical societies should not be discouraged by the results reported in this investigation. As societies become more familiar with Twitter and understand the mechanisms to develop connections, these societies will have a greater influence within increasingly stronger networks. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Metallurgical aspects of corrosion resistance of aluminium alloys

Energy Technology Data Exchange (ETDEWEB)

Reboul, M.C. [Pechiney Voreppe Research Centre France (France); CNRS-INP Grenoble, SIMAP-INP Grenoble, Universite France, Saint Martin d' Heres Cedex (France); Baroux, B. [SIMAP-INP, Grenoble University, 1130 rue de la piscine, Saint Martin d' Heres Cedex (France)

2011-03-15

Aluminium is the second most often used metal after steel. In this paper, the most current uses of aluminium alloys are first summarised. Then, their different corrosion modes, i.e. pitting, crevice, filiform, galvanic and structural corrosion (including inter-granular, exfoliation and stress corrosion cracking) are reviewed, with particular attention paid to metallurgical factors controlling the corrosion process. For each mode, some instances of possible in-service failure are given, followed by the discussion of the involved mechanisms and the presentation of appropriate solutions to prevent corrosion. Last, passivity and polarisation behaviour are discussed with reference to stainless steels. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments

OpenAIRE

Shim, Kyu-Sang; Oh, Soram; Kum, KeeYeon; Kim, Yu-Chan; Jee, Kwang-Koo; Chang, Seok Woo

2017-01-01

The aim of this study was to investigate the effect of thermomechanical treatment on mechanical and metallurgical properties of nickel-titanium (NiTi) rotary instruments. Eight kinds of NiTi rotary instruments with sizes of ISO #25 were selected: ProFile, K3, and One Shape for the conventional alloy; ProTaper NEXT, Reciproc, and WaveOne for the M-wire alloy; HyFlex CM for the controlled memory- (CM-) wire; and TF for the R-phase alloy. Torsional fracture and cyclic fatigue fracture tests were...

Key Lake Mining Corporation metallurgical complex

International Nuclear Information System (INIS)

Lendrum, F.C.

1984-02-01

The Key Lake uranium mine is located in Saskatchewan, 550 km northeast of Saskatoon. It began operations in 1983, and is licensed and regulated by both Saskatchewan government agencies and the Canadian Atomic Energy Control Board. This report examines the metallurgical processes used at the mill and discusses the spills that occurred in the first four months the mine was in operation. It finds that all spills of an acidic nature in the mill were small amounts in the CCD or solution pretreatment sections. Contingency procedures are in place and sumps are capable of handling spills. The only major change in design contemplated will be converting the secondary crushing from the use of an impact crusher to the use of a semi-autogeneous grinding mill. The monitoring program set out by the AECB and Saskatchewan Environment is thorough. It monitors effluents and water pathways, and includes aquatic biota and sediments. Air monitoring is also required by Saskatchewan Environment

An examination of gender differences in the American Fisheries Society peer-review process

Science.gov (United States)

Handley, Grace; Frantz, Cynthia M; Kocovsky, Patrick; DeVries, Dennis R.; Cooke, Steven J.; Claussen, Julie

2015-01-01

This study investigated the possibility of gender differences in outcomes throughout the peer review process of American Fisheries Society (AFS) journals. For each manuscript submitted to four AFS journals between January 2003 and December 2010, we collated information regarding the gender and nationality of authors, gender of associate editor, gender of reviewers, reviewer recommendations, associate editor's decision, and publication status of the manuscript. We used hierarchical linear modeling to test for differences in manuscript decision outcomes associated with author, reviewer, and associate editor gender. Gender differences were present at some but not every stage of the review process and were not equal among the four journals. Although there was a small gender difference in decision outcomes, we found no evidence of bias in editors’ and reviewers’ recommendations. Our results support the conclusion that the current single-blind review system does not result in bias against female authors within AFS journals.

Highly sensitive luminescence method of scandium determination in the products of metallurgical reprocessing

International Nuclear Information System (INIS)

Matveets, M.A.; Akhmetova, S.D.

1988-01-01

Highly sensitive reaction of scandium with 1,10-phenanthroline and eosin is used for the development of luminescence method of its determination in metallurgical products. The effect of interfering elements is eliminated by scandium extraction with monocarboxylic acids. The method permits to determine scandium content from 5 x 10 -5 % (Sr 0.15 - 0.25)

Automatic Processing of Metallurgical Abstracts for the Purpose of Information Retrieval. Final Report.

Science.gov (United States)

Melton, Jessica S.

Objectives of this project were to develop and test a method for automatically processing the text of abstracts for a document retrieval system. The test corpus consisted of 768 abstracts from the metallurgical section of Chemical Abstracts (CA). The system, based on a subject indexing rational, had two components: (1) a stored dictionary of words…

The Role of the Small Private College in Creating a Moral, Spiritual Climate in American Society. CASC Newsletter Supplements, 1976-77.

Science.gov (United States)

Hatfield, Mark

The capacity of American institutions to preserve and convey basic values to new generations has substantially diminished, suggests this former U.S. Senator from Oregon. His opinion is that the small private college can help create a moral and spiritual climate in society. The range of topics discussed includes: college preservation of values;…

Cultural macroevolution on neighbor graphs : vertical and horizontal transmission among Western North American Indian societies.

Science.gov (United States)

Towner, Mary C; Grote, Mark N; Venti, Jay; Borgerhoff Mulder, Monique

2012-09-01

What are the driving forces of cultural macroevolution, the evolution of cultural traits that characterize societies or populations? This question has engaged anthropologists for more than a century, with little consensus regarding the answer. We develop and fit autologistic models, built upon both spatial and linguistic neighbor graphs, for 44 cultural traits of 172 societies in the Western North American Indian (WNAI) database. For each trait, we compare models including or excluding one or both neighbor graphs, and for the majority of traits we find strong evidence in favor of a model which uses both spatial and linguistic neighbors to predict a trait's distribution. Our results run counter to the assertion that cultural trait distributions can be explained largely by the transmission of traits from parent to daughter populations and are thus best analyzed with phylogenies. In contrast, we show that vertical and horizontal transmission pathways can be incorporated in a single model, that both transmission modes may indeed operate on the same trait, and that for most traits in the WNAI database, accounting for only one mode of transmission would result in a loss of information.

Current Ketamine Practice: Results of the 2016 American Society of Pain Management Nursing Survey on Ketamine.

Science.gov (United States)

Klaess, Cynthia C; Jungquist, Carla R

2018-06-01

Ketamine is increasingly utilized for a variety of pain management challenges. Audience comments from a ketamine presentation at the 2015 American Society of Pain Management Nursing (ASPMN) Conference reflected wide variation in ketamine practices as well as barriers to use. The goal was to gain a greater understanding of ASPMN member practice patterns and barriers related to ketamine as adjunctive therapy for pain management. A questionnaire survey design was used. Respondents represented 35 states and 2 countries. The participants were 146 respondents from ASPMN membership (1,485 members). The survey was distributed by ASPMN on SurveyMonkey. Practice setting and ketamine administration practices were assessed with areas for comments. Results were reviewed using frequencies to describe responses and formatted into tables. Comments were individually reviewed and grouped into common themes. Administration of ketamine as an analgesic was reported by 63% of respondents. Continuous intravenous ketamine infusions were the most common route of administration (65%); however, wide variability in dosing and length of therapy was reported. A wide variety of practices and challenges related to ketamine utilization were noted. Numerous studies have indicated the analgesic benefits of ketamine in pain management. The lack of practice standardization has created challenges to its consistent use and outcome measurement. Additionally, the off-label use of ketamine for pain management creates its own unique challenges. However, given the current national climate with intense focus on pain management, interdisciplinary practitioners have an ideal opportunity to evaluate ketamine's use in a comprehensive approach to pain management. Copyright © 2018 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

American Meteor Society Fireball reporting system and mobile application

Science.gov (United States)

Hankey, M.

2014-07-01

The American Meteor Society (AMS) founded in 1911 pioneered the visual study of meteors and has collected data relating to meteor observations and bright fireballs for over 100 years. In December 2010, the online fireball reporting system was upgraded to an interactive application that utilizes Google Maps and other programmatic methods to pinpoint the observer's location, azimuth and elevation values with a high degree of precision. The AMS has collected 10s of 1000s of witness reports relating to 100s of events each year since the new application was released. Three dimensional triangulation methods that average the data collected from witnesses have been developed that can determine the start and end points of the meteor with an accuracy of web application. Users can file a new report directly on the phone or update the values submitted through a web report. After web users complete their fireball report online, they are prompted to download the app and update their observation with the more precise data provided by the sensors in the mobile device. The mobile app also provides an accurate means for the witness to report the elapsed time of the fireball. To log this value, the user drags the device across the sky where they saw the fireball. This process is designed to require no button click or user interaction to start and stop the time recording. A count down initiates the process and once the user's phone crosses the plane of azimuth for the end point of the fireball the velocity timer automatically stops. Users are asked to log the recording three times in an effort to minimize error. The three values are then averaged into a final score. Once enough witnesses have filed reports, elapsed time data collected from the mobile phone can be used to determine the velocity of the fireball. With the velocity, trajectory solution and RA/DEC the AMS can plot orbital estimates for significant fireball events reported to the society. Our hope is that overtime this

Metallurgical Characterization of Reduced Activation Martensitic Steel F-82H Modified

International Nuclear Information System (INIS)

Fernandez, P.; Lapena, J.; Lancha, A.M.; Gomez-Briceno, D.; Schirra, M.

1999-12-01

During 1995-1998 within of research and development programs on reduced ferritic/martensitic steels for fusion, metallurgical characterization of 8Cr-2WVTa steel, denominated F-28H modified, have been carried out. The work has focused on studying the microstructural and mechanical (tensile, creep, low cycle fatigue and charpy) characteristics of as-received state and aged material in the temperature range 300 degree centigrade to 600 degree centigrade for periods up to 5000 h. (Author) 45 refs

Fatigue analysis of a structure with welds considering metallurgical discontinuities

International Nuclear Information System (INIS)

Cabrillat, M.T.; Lejeail, Y.

1995-01-01

Within the frameworks of a creep-fatigue experimental program, called EVASION, thermo-mechanical tests were conducted on two mock-ups, the first one was fully machined and the second one welded and then machined (in order to eliminate geometrical discontinuities, thus only leaving metallurgical discontinuities). These two mock-ups were submitted to exactly the same loading history. Plastic analyses with a correct description of mechanical properties and fatigue strength of materials are conducted and compared with experimental results in order to highlight the influence of the weld. (author). 3 refs., 4 figs., 3 tabs

“Abandon All Hope Ye Who Enter Here”: The Critique Of Consumer Society In American Psycho and Fight Club

OpenAIRE

Liktor, Coşkun

2016-01-01

This article explores the politics of two films, namely American Psycho (Mary Harron, 2000) and Fight Club (David Fincher, 1999), both of which portray a privileged, white collar protagonist suffering from a personality disorder that leads him to commit violent acts. Set in the late 20th century America characterized by rampant consumerism, stark materialism and fierce competition, both films suggest that it is the debilitating impact of the commodifed, commodity-driven consumer society that ...

The new totalitarian society

Directory of Open Access Journals (Sweden)

Vlajki Emil

2011-01-01

Full Text Available The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout history. For instance, the Inquisition, which, contrary to what happened at scholastic universities, severely berated rational thinking in practice. Catholicism helped carry out genocide against the Jews, and Orthodoxy is in a certain manner tied in with Stalinism. The new totalitarian society is anchored in American Protestantism. On the whole, Christian rationalism is a sphere of science, techniques and technologies efficiently employed to promote the West to the status of a society of plenty and the conception of human rights, which turn into their opposite and irrational behavior of the worst kind. An example of such inhumanity is the attack against Yugoslavia/Serbia in 1999.

Standardizing Clinically Meaningful Outcome Measures Beyond HbA1c for Type 1 Diabetes: A Consensus Report of the American Association of Clinical Endocrinologists, the American Association of Diabetes Educators, the American Diabetes Association, the Endocrine Society, JDRF International, The Leona M. and Harry B. Helmsley Charitable Trust, the Pediatric Endocrine Society, and the T1D Exchange.

Science.gov (United States)

Agiostratidou, Gina; Anhalt, Henry; Ball, Dana; Blonde, Lawrence; Gourgari, Evgenia; Harriman, Karen N; Kowalski, Aaron J; Madden, Paul; McAuliffe-Fogarty, Alicia H; McElwee-Malloy, Molly; Peters, Anne; Raman, Sripriya; Reifschneider, Kent; Rubin, Karen; Weinzimer, Stuart A

2017-12-01

To identify and define clinically meaningful type 1 diabetes outcomes beyond hemoglobin A 1c (HbA 1c ) based upon a review of the evidence, consensus from clinical experts, and input from researchers, people with type 1 diabetes, and industry. Priority outcomes include hypoglycemia, hyperglycemia, time in range, diabetic ketoacidosis (DKA), and patient-reported outcomes (PROs). While priority outcomes for type 1 and type 2 diabetes may overlap, type 1 diabetes was the focus of this work. A Steering Committee-comprising representatives from the American Association of Clinical Endocrinologists, the American Association of Diabetes Educators, the American Diabetes Association, the Endocrine Society, JDRF International, The Leona M. and Harry B. Helmsley Charitable Trust, the Pediatric Endocrine Society, and the T1D Exchange-was the decision-making body for the Type 1 Diabetes Outcomes Program. Their work was informed by input from researchers, industry, and people with diabetes through Advisory Committees representing each stakeholder group. Stakeholder surveys were used to identify priority outcomes. The outcomes prioritized in the surveys were hypoglycemia, hyperglycemia, time in range, DKA, and PROs. To develop consensus on the definitions of these outcomes, the Steering Committee relied on published evidence, their clinical expertise, and feedback from the Advisory Committees. The Steering Committee developed definitions for hypoglycemia, hyperglycemia, time in range, and DKA in type 1 diabetes. The definitions reflect their assessment of the outcome's short- and long-term clinical impact on people with type 1 diabetes. Knowledge gaps to be addressed by future research were identified. The Steering Committee discussed PROs and concluded that further type 1 diabetes-specific development is needed. The Steering Committee recommends use of the defined clinically meaningful outcomes beyond HbA 1c in the research, development, and evaluation of type 1 diabetes

Nuclear criticality safety experiments, calculations, and analyses - 1958 to 1982. Volume 2. Summaries. Complilation of papers from the Transactions of the American Nuclear Society

International Nuclear Information System (INIS)

Koponen, B.L.; Hampel, V.E.

1982-01-01

This compilation contains 688 complete summaries of papers on nuclear criticality safety as presented at meetings of the American Nuclear Society (ANS). The selected papers contain criticality parameters for fissile materials derived from experiments and calculations, as well as criticality safety analyses for fissile material processing, transport, and storage. The compilation was developed as a component of the Nuclear Criticality Information System (NCIS) now under development at the Lawrence Livermore National Laboratory. The compilation is presented in two volumes: Volume 1 contains a directory to the ANS Transaction volume and page number where each summary was originally published, the author concordance, and the subject concordance derived from the keyphrases in titles. Volume 2 contains-in chronological order-the full-text summaries, reproduced here by permission of the American Nuclear Society from their Transactions, volumes 1-41

Nuclear criticality safety experiments, calculations, and analyses - 1958 to 1982. Volume 2. Summaries. Complilation of papers from the Transactions of the American Nuclear Society

Energy Technology Data Exchange (ETDEWEB)

Koponen, B.L.; Hampel, V.E.

1982-10-21

This compilation contains 688 complete summaries of papers on nuclear criticality safety as presented at meetings of the American Nuclear Society (ANS). The selected papers contain criticality parameters for fissile materials derived from experiments and calculations, as well as criticality safety analyses for fissile material processing, transport, and storage. The compilation was developed as a component of the Nuclear Criticality Information System (NCIS) now under development at the Lawrence Livermore National Laboratory. The compilation is presented in two volumes: Volume 1 contains a directory to the ANS Transaction volume and page number where each summary was originally published, the author concordance, and the subject concordance derived from the keyphrases in titles. Volume 2 contains-in chronological order-the full-text summaries, reproduced here by permission of the American Nuclear Society from their Transactions, volumes 1-41.

Magnetohydrodynamic research in fusion blanket engineering and metallurgical processing

International Nuclear Information System (INIS)

Tokuhiro, A.

1991-11-01

A review of recent research activities in liquid metal magnetohydrodynamics (LM-MHDs) is presented in this article. Two major reserach areas are discussed. The first topic involves the thermomechanical design issues in a proposed tokamak fusion reactor. The primary concerns are in the magneto-thermal-hydraulic performance of a self-cooled liquid metal blanket. The second topic involves the application of MHD in material processing in the metallurgical and semiconductor industries. The two representative applications are electromagnetic stirring (EMS) of continuously cast steel and the Czochralski (CZ) method of crystal growth in the presence of a magnetic field. (author) 24 figs., 10 tabs., 136 refs

Minutes of the 45. meeting of the American society of therapeutic radiology and oncology (Astro)

International Nuclear Information System (INIS)

Racadot, S.; Mazeron, J.J.

2003-01-01

The forty fifth meeting of the American Society of Therapeutic Radiology and Oncology (ASTRO) held at the center of congress in Salt Lake city in october 2003. 542 scientific works have been presented, whom 221 orally. Escalation of radiation doses in prostate cancers have been studied. Fractionation and hormones therapy in prostate cancers are reported. The bladder cancers made the object of information, the bronchi cancer ( non at small cells and at small cells) have been analysed. Cancers of the ORL sphere, mammary gland and brain metastases were presented. The radiotherapy as a palliative treatment of bone metastases made the object of a report. The receptors of the epidermoid growth factor has been shown as an important factor to predict the tumor response to irradiation. (N.C.)

Changing Anthropology, Changing Society

Science.gov (United States)

Varughese, Heather

2009-01-01

Fifty years after the founding of the field of medical anthropology, the Society for Medical Anthropology of the American Anthropological Association held its first independent meeting on September 24-27, 2009, at Yale University. PMID:20027281

Obtaining of dense and highly porous ceramic materials from metallurgical slag

OpenAIRE

Fidancevska E.; Mangutova B.; Milosevski D.; Milosevski M.; Bossert J.

2003-01-01

Glass-ceramics in a dense and highly porous form can be obtained from metallurgical slag and waste glass of TV monitors. Using polyurethane foam as pore creator, a highly porous system with porosity of 65 ± 5 %, E-modulus and flexural strength of 8 ± 3 GPa and 13 ± 3.5 MPa respectively can be obtained. This porous material had durability (mass loss) of 0.03 % in 0.1 M HCl that is identical with the durability of a dense composite.

ASCO 2007: “Translating Research into Practice”. Report from the 34th Annual Meeting of the American Society of Clinical Oncology

Directory of Open Access Journals (Sweden)

Camillo Porta

2011-12-01

Full Text Available This year, for the 34th time in its history, the mastodontic machinery of the American Society of Clinical Oncology (ASCO once again welcomed thousand of members and participants from all over the world to the Society’s annual meeting, which, this year, took place in the ample and well-appointed, McCormick’s Convention Center in Chicago, Illinois...

46 CFR 188.10-59 - Recognized classification society.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Recognized classification society. 188.10-59 Section 188... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-59 Recognized classification society. This term means the American Bureau of Shipping or other classification society...

Effect of glass-ceramic-processing cycle on the metallurgical properties of candidate alloys for actuator housings

Energy Technology Data Exchange (ETDEWEB)

Weirick, L.J.

1982-01-01

This report summarizes the results from an investigation on the effect of a glass ceramic processing cycle on the metallurgical properties of metal candidates for actuator housings. The cycle consists of a 980/sup 0/C sealing step, a 650/sup 0/C crystallization step and a 475/sup 0/C annealing step. These temperatue excursions are within the same temperature regime as annealing and heat treating processes normally employed for metals. Therefore, the effect of the processing cycle on metallurgical properties of microstructure, strength, hardness and ductility were examined. It was found that metal candidates which are single phase or solid solution alloys (such as 21-6-9, Hastelloy C-276 and Inconel 625) were not affected whereas multiphase or precipitation hardened alloys (such as Inconel 718 and Titanium ..beta..-C) were changed by the processing cycle for the glass ceramic.

International association for the study of lung cancer/american thoracic society/european respiratory society international multidisciplinary classification of lung adenocarcinoma.

Science.gov (United States)

Travis, William D; Brambilla, Elisabeth; Noguchi, Masayuki; Nicholson, Andrew G; Geisinger, Kim R; Yatabe, Yasushi; Beer, David G; Powell, Charles A; Riely, Gregory J; Van Schil, Paul E; Garg, Kavita; Austin, John H M; Asamura, Hisao; Rusch, Valerie W; Hirsch, Fred R; Scagliotti, Giorgio; Mitsudomi, Tetsuya; Huber, Rudolf M; Ishikawa, Yuichi; Jett, James; Sanchez-Cespedes, Montserrat; Sculier, Jean-Paul; Takahashi, Takashi; Tsuboi, Masahiro; Vansteenkiste, Johan; Wistuba, Ignacio; Yang, Pan-Chyr; Aberle, Denise; Brambilla, Christian; Flieder, Douglas; Franklin, Wilbur; Gazdar, Adi; Gould, Michael; Hasleton, Philip; Henderson, Douglas; Johnson, Bruce; Johnson, David; Kerr, Keith; Kuriyama, Keiko; Lee, Jin Soo; Miller, Vincent A; Petersen, Iver; Roggli, Victor; Rosell, Rafael; Saijo, Nagahiro; Thunnissen, Erik; Tsao, Ming; Yankelewitz, David

2011-02-01

Adenocarcinoma is the most common histologic type of lung cancer. To address advances in oncology, molecular biology, pathology, radiology, and surgery of lung adenocarcinoma, an international multidisciplinary classification was sponsored by the International Association for the Study of Lung Cancer, American Thoracic Society, and European Respiratory Society. This new adenocarcinoma classification is needed to provide uniform terminology and diagnostic criteria, especially for bronchioloalveolar carcinoma (BAC), the overall approach to small nonresection cancer specimens, and for multidisciplinary strategic management of tissue for molecular and immunohistochemical studies. An international core panel of experts representing all three societies was formed with oncologists/pulmonologists, pathologists, radiologists, molecular biologists, and thoracic surgeons. A systematic review was performed under the guidance of the American Thoracic Society Documents Development and Implementation Committee. The search strategy identified 11,368 citations of which 312 articles met specified eligibility criteria and were retrieved for full text review. A series of meetings were held to discuss the development of the new classification, to develop the recommendations, and to write the current document. Recommendations for key questions were graded by strength and quality of the evidence according to the Grades of Recommendation, Assessment, Development, and Evaluation approach. The classification addresses both resection specimens, and small biopsies and cytology. The terms BAC and mixed subtype adenocarcinoma are no longer used. For resection specimens, new concepts are introduced such as adenocarcinoma in situ (AIS) and minimally invasive adenocarcinoma (MIA) for small solitary adenocarcinomas with either pure lepidic growth (AIS) or predominant lepidic growth with ≤ 5 mm invasion (MIA) to define patients who, if they undergo complete resection, will have 100% or near 100

Multidimensional Diagnostic Criteria for Chronic Pain: Introduction to the ACTTION-American Pain Society Pain Taxonomy (AAPT).

Science.gov (United States)

Dworkin, Robert H; Bruehl, Stephen; Fillingim, Roger B; Loeser, John D; Terman, Gregory W; Turk, Dennis C

2016-09-01

A variety of approaches have been used to develop diagnostic criteria for chronic pain. The published evidence of the reliability and validity of existing diagnostic criteria is limited, and these criteria have typically not been used in clinical practice. The availability of a widely accepted, consistently applied, and evidence-based taxonomy of diagnostic criteria would improve the quality of clinical research on chronic pain and would be of great value in clinical practice. To address the need for evidence-based diagnostic criteria for the major chronic pain conditions, the Analgesic, Anesthetic, and Addiction Clinical Trial Translations, Innovations, Opportunities, and Networks (ACTTION) public-private partnership with the US Food and Drug Administration and the American Pain Society (APS) have collaborated on the development of the ACTTION-APS Pain Taxonomy (AAPT). AAPT provides a multidimensional framework that is applied systematically in the development of diagnostic criteria. This article (1) describes the background and rationale for AAPT; (2) presents the AAPT taxonomy and the specific conditions for which diagnostic criteria have been developed (to be published separately); (3) briefly reviews the 5 dimensions that constitute the AAPT multidimensional framework and describes the 7 accompanying articles that discuss these dimensions and other important issues involving AAPT; and (4) provides an overview of next steps, specifically, the general processes by which the initial set of diagnostic criteria (for which the evidence base has been drawn from the literature, systematic reviews, and secondary analyses of existing databases) will undergo additional assessments of reliability and validity. To address the need for evidence-based diagnostic criteria for the major chronic pain conditions, the AAPT provides a multidimensional framework that is applied systematically in the development of diagnostic criteria. The long-term objective of AAPT is to advance

Validation of the Society of Critical Care Medicine and American Society for Parenteral and Enteral Nutrition Recommendations for Caloric Provision to Critically Ill Obese Patients: A Pilot Study.

Science.gov (United States)

Mogensen, Kris M; Andrew, Benjamin Y; Corona, Jasmine C; Robinson, Malcolm K

2016-07-01

The Society of Critical Care Medicine (SCCM) and American Society for Parenteral and Enteral Nutrition (ASPEN) recommend that obese, critically ill patients receive 11-14 kcal/kg/d using actual body weight (ABW) or 22-25 kcal/kg/d using ideal body weight (IBW), because feeding these patients 50%-70% maintenance needs while administering high protein may improve outcomes. It is unknown whether these equations achieve this target when validated against indirect calorimetry, perform equally across all degrees of obesity, or compare well with other equations. Measured resting energy expenditure (MREE) was determined in obese (body mass index [BMI] ≥30 kg/m(2)), critically ill patients. Resting energy expenditure was predicted (PREE) using several equations: 12.5 kcal/kg ABW (ASPEN-Actual BW), 23.5 kcal/kg IBW (ASPEN-Ideal BW), Harris-Benedict (adjusted-weight and 1.5 stress-factor), and Ireton-Jones for obesity. Correlation of PREE to 65% MREE, predictive accuracy, precision, bias, and large error incidence were calculated. All equations were significantly correlated with 65% MREE but had poor predictive accuracy, had excessive large error incidence, were imprecise, and were biased in the entire cohort (N = 31). In the obesity cohort (n = 20, BMI 30-50 kg/m(2)), ASPEN-Actual BW had acceptable predictive accuracy and large error incidence, was unbiased, and was nearly precise. In super obesity (n = 11, BMI >50 kg/m(2)), ASPEN-Ideal BW had acceptable predictive accuracy and large error incidence and was precise and unbiased. SCCM/ASPEN-recommended body weight equations are reasonable predictors of 65% MREE depending on the equation and degree of obesity. Assuming that feeding 65% MREE is appropriate, this study suggests that patients with a BMI 30-50 kg/m(2) should receive 11-14 kcal/kg/d using ABW and those with a BMI >50 kg/m(2) should receive 22-25 kcal/kg/d using IBW. © 2015 American Society for Parenteral and Enteral Nutrition.

Fifth joint meeting of the American Urological Association and the Japanese Urological Association International Affiliate Society Meeting at the 105th Annual Meeting of the American Urological Association.

Science.gov (United States)

Myers, Robert P; Seki, Narihito; Gotoh, Momokazu; Chai, Toby C; Kaplan, Steven A; Inoue, Keiji; Trachtenberg, John; Kikuchi, Eiji; Nishiyama, Hiroyuki; Chang, Sam S; Lee, Cheryl; Muto, Satoru; Ito, Kazuto; Andriole, Gerald L; Eto, Masatoshi; Sumitomo, Makoto; Kamba, Tomomi; Wood, Chrsitopher G; Margulis, Vitaly; Naito, Seiji; Egawa, Shin

2010-08-01

We are heartily grateful for the warm support of all of the people concerned, including the moderators and panelists of both societies for giving us the opportunity to hold the 5(th) American Urological Association/Japanese Urological Association (AUA/JUA) International Affiliate Society Meeting, held once again at the 105th Annual Meeting of the American Urological Association (29 May-3 June 2010, San Francisco, California, USA). The year of 2010 is a memorable one, being the start of reciprocal collaborations between the AUA and the JUA. The JUA, in collaboration with the AUA, is promoting an academic exchange program whereby outstanding and promising Japanese and American junior faculty members will be given the opportunity to work in the USA and Japan for 1 month. The program not only allows the sharing of knowledge and experience, but also is designed to foster a closer alliance between the AUA and JUA, and assists in identifying future leaders within both organizations. The AUA and JUA will have an exhibit booth at each other's annual meeting, promoting our new joint activities. Both the JUA and AUA will organize educational courses in Hawaii in 2011. With all of these activities, the JUA hopes it will provide greater opportunities for young Japanese urologists to participate in educational projects in the USA. We would like to thank Professor Anton J. Bueschen, President of AUA, Professor Robert C Flanigan, Secretary General of AUA and the staff of the AUA and JUA for supporting our program. At the same time, we need the support of all the members and their valuable suggestions. We look forward to further participation of AUA members to this meeting. Seiji Naito md, President of JUA Shin Egawa md, Chairman of the International Committee of JUA.

The Department of Energy/American Chemical Society Summer School in Nuclear and Radiochemistry at San Jose State University

International Nuclear Information System (INIS)

Kinard, W.F.; Silber, H.B.

2005-01-01

A Summer School in Nuclear Chemistry sponsored by the U. S. Department of Energy and the American Chemical Society has been held at San Jose State University for the past 20 years. The intent of the program is to introduce outstanding college students to the field of nuclear and radiochemistry with the goal that some of these students will consider careers on nuclear science. The program features radiochemistry experiments along with radiation safety training, guest lectures by well known nuclear scientists and field trips to nuclear chemistry facilities in the San Francisco area. (author)

46 CFR 42.05-60 - Recognized classification society.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Recognized classification society. 42.05-60 Section 42... FOREIGN VOYAGES BY SEA Definition of Terms Used in This Subchapter § 42.05-60 Recognized classification society. The term recognized classification society means the American Bureau of Shipping or other...

46 CFR 90.10-35 - Recognized classification society.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Recognized classification society. 90.10-35 Section 90... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 90.10-35 Recognized classification society. The term recognized classification society means the American Bureau of Shipping or other...

Bio-alteration of metallurgical wastes by Pseudomonas aeruginosa in a semi flow-through reactor.

Science.gov (United States)

van Hullebusch, Eric D; Yin, Nang-Htay; Seignez, Nicolas; Labanowski, Jérôme; Gauthier, Arnaud; Lens, Piet N L; Avril, Caroline; Sivry, Yann

2015-01-01

Metallurgical activities can generate a huge amount of partially vitrified waste products which are either landfilled or recycled. Lead Blast Furnace (LBF) slags are often disposed of in the vicinity of metallurgical plants, and are prone to weathering, releasing potentially toxic chemical components into the local environment. To simulate natural weathering in a slag heap, bioweathering of these LBF slags was studied in the presence of a pure heterotrophic bacterial strain (Pseudomonas aeruginosa) and in a semi-flow through reactor with intermittent leachate renewal. The evolution of water chemistry, slag composition and texture were monitored during the experiments. The cumulative bulk release of dissolved Fe, Si, Ca and Mg doubled in the presence of bacteria, probably due to the release of soluble complexing organic molecules (e.g. siderophores). In addition, bacterial biomass served as the bioadsorbent for Pb, Fe and Zn as 70-80% of Pb and Fe, 40-60% of Zn released are attached to and immobilized by the bacterial biomass. Copyright © 2014 Elsevier Ltd. All rights reserved.

Metallurgical characterization of pulsed current gas tungsten arc, friction stir and laser beam welded AZ31B magnesium alloy joints

International Nuclear Information System (INIS)

Padmanaban, G.; Balasubramanian, V.

2011-01-01

This paper reports the influences of welding processes such as friction stir welding (FSW), laser beam welding (LBW) and pulsed current gas tungsten arc welding (PCGTAW) on mechanical and metallurgical properties of AZ31B magnesium alloy. Optical microscopy, scanning electron microscopy, transmission electron microscopy and X-Ray diffraction technique were used to evaluate the metallurgical characteristics of welded joints. LBW joints exhibited superior tensile properties compared to FSW and PCGTAW joints due to the formation of finer grains in weld region, higher fusion zone hardness, the absence of heat affected zone, presence of uniformly distributed finer precipitates in weld region.

An American Paradox: Hunger in an Affluent Society

Science.gov (United States)

McGovern, George S.

1974-01-01

Nutritionally vulnerable mothers and children, American Indians and Alaskan Natives, migrant laborers, and the elderly are described as the hungry in America. Additional and more effective government food programs are proposed as the solution. (DE)

An Official American Thoracic Society Research Statement: Implementation Science in Pulmonary, Critical Care, and Sleep Medicine.

Science.gov (United States)

Weiss, Curtis H; Krishnan, Jerry A; Au, David H; Bender, Bruce G; Carson, Shannon S; Cattamanchi, Adithya; Cloutier, Michelle M; Cooke, Colin R; Erickson, Karen; George, Maureen; Gerald, Joe K; Gerald, Lynn B; Goss, Christopher H; Gould, Michael K; Hyzy, Robert; Kahn, Jeremy M; Mittman, Brian S; Mosesón, Erika M; Mularski, Richard A; Parthasarathy, Sairam; Patel, Sanjay R; Rand, Cynthia S; Redeker, Nancy S; Reiss, Theodore F; Riekert, Kristin A; Rubenfeld, Gordon D; Tate, Judith A; Wilson, Kevin C; Thomson, Carey C

2016-10-15

Many advances in health care fail to reach patients. Implementation science is the study of novel approaches to mitigate this evidence-to-practice gap. The American Thoracic Society (ATS) created a multidisciplinary ad hoc committee to develop a research statement on implementation science in pulmonary, critical care, and sleep medicine. The committee used an iterative consensus process to define implementation science and review the use of conceptual frameworks to guide implementation science for the pulmonary, critical care, and sleep community and to explore how professional medical societies such as the ATS can promote implementation science. The committee defined implementation science as the study of the mechanisms by which effective health care interventions are either adopted or not adopted in clinical and community settings. The committee also distinguished implementation science from the act of implementation. Ideally, implementation science should include early and continuous stakeholder involvement and the use of conceptual frameworks (i.e., models to systematize the conduct of studies and standardize the communication of findings). Multiple conceptual frameworks are available, and we suggest the selection of one or more frameworks on the basis of the specific research question and setting. Professional medical societies such as the ATS can have an important role in promoting implementation science. Recommendations for professional societies to consider include: unifying implementation science activities through a single organizational structure, linking front-line clinicians with implementation scientists, seeking collaborations to prioritize and conduct implementation science studies, supporting implementation science projects through funding opportunities, working with research funding bodies to set the research agenda in the field, collaborating with external bodies responsible for health care delivery, disseminating results of implementation

EXPERIENCE AND PROSPECTS OF MASTER’S DEGREE TRAINING OF ENGINEERING STAFF IN THE FIELD OF METALLURGICAL SCIENCE

Directory of Open Access Journals (Sweden)

V. M. Konstantinov

2016-01-01

Full Text Available The experience of training for MBA in engineering and technologies for specialties “Materials Science in Mechanical Engineering” at the department was analyzed. Efficiency of the practical-focused Master’s degree program for engineering staff of the machine-building and metallurgical enterprises was emphasized. Some ways to increase efficiency of master training of engineering experts in the field of metallurgical science and heat treatment are offered. Need of more active interaction with engineering services of the production enterprise during implementation of the master thesis was proved. Need of domination of requirements of the production enterprise is highlighted in master preparation program. The algorithm of interaction of department and technical service of the production enterprise during training of the factory expert in the correspondence practical-focused Master’s degree program is offered.

Obtaining of dense and highly porous ceramic materials from metallurgical slag

Directory of Open Access Journals (Sweden)

Fidancevska E.

2003-01-01

Full Text Available Glass-ceramics in a dense and highly porous form can be obtained from metallurgical slag and waste glass of TV monitors. Using polyurethane foam as pore creator, a highly porous system with porosity of 65 ± 5 %, E-modulus and flexural strength of 8 ± 3 GPa and 13 ± 3.5 MPa respectively can be obtained. This porous material had durability (mass loss of 0.03 % in 0.1 M HCl that is identical with the durability of a dense composite.

The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

Directory of Open Access Journals (Sweden)

Mohammed Sabbar Abdulbaqi

2017-12-01

Full Text Available Saul Bellow (1915 –2005 is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976. He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956 in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand and the husband and wife on the other hand. The study aims to recognize to what extent materialism represents a dispersed element for the family unit.

Hispanic immigrants and bilingual education after proposition 227 : a case study of attitudes about language and culture in American Society

OpenAIRE

小林, ひろみ

2009-01-01

Public criticism of bilingual education or bilingualism in the United States has been growing since the early 1990s. As part of the argument against bilingual education, Hispanic immigrants have been portrayed as a monolithic group clinging to their own language and culture and reluctant to assimilate into American society. Proposition 227, which officially ended bilingual education programs in California public schools, was passed on June 2, 1998. Race and ethnicity were reflected in the ...

First Mining workshop of Mining and metallurgical of MERCOSUR

International Nuclear Information System (INIS)

1994-01-01

In the city of Montevideo, capital of the Oriental Republic of Uruguay, at 23 days of September 1994, under the First Meeting of Mercosur Mining Metallurgical, meet representatives of the mining sector in the countries signed the Treaty of Asuncion , attended as observers, authorities of the Republic of Bolivia and Ecuador and representatives of the productive labor, legislative and research. The primary objective is to integrate the mining sectors of those countries, taking into account the specificity of the mining, given by the resource it uses, the need for high-risk investment with slow recoveries of capital and infrastructure problems, taking into account leverage and its remarkable impact on the development of regional economies.

Morphology, chemistry and distribution of neoformed spherulites in agricultural land affected by metallurgical point-source pollution

NARCIS (Netherlands)

Leguedois, S.; Oort, van F.; Jongmans, A.G.; Chevalier, P.

2004-01-01

Metal distribution patterns in superficial soil horizons of agricultural land affected by metallurgical point-source pollution were studied using optical and electron microscopy, synchrotron radiation and spectroscopy analyses. The site is located in northern France, at the center of a former entry

Readability of sports medicine-related patient education materials from the American Academy of Orthopaedic Surgeons and the American Orthopaedic Society for Sports Medicine.

Science.gov (United States)

Ganta, Abhishek; Yi, Paul H; Hussein, Khalil; Frank, Rachel M

2014-04-01

Although studies have revealed high readability levels of orthopedic patient education materials, no study has evaluated sports medicine-related patient education materials. We conducted a study to assess the readability of sports medicine-related patient education materials from the American Academy of Orthopaedic Surgeons (AAOS) and the American Orthopaedic Society for Sports Medicine (AOSSM). All sports medicine patient education articles available online in 2012 from the AAOS and the AOSSM, including the Stop Sports Injuries Campaign (STOP), were identified, and their readability was assessed with the Flesch-Kinkaid (FK) readability test. Mean overall FK grade level of the 170 articles reviewed (104 from AAOS, 36 from AOSSM, 30 from STOP) was 10.2. Mean FK levels for the 3 sources were 9.5 (AAOS), 11.0 (AOSSM), and 11.5 (STOP) (P = .16). Fifteen (8.8%) of the 170 articles had a readability level at or below eighth grade (average reading level of US adults); only 2 (1.2%) of the 170 articles were at or below the recommended sixth-grade level. The majority of sports medicine-related patient education materials from AAOS and AOSSM had reading levels higher than recommended, indicating that the majority of the patient population may find it difficult to comprehend these articles.

Metallurgical Design and Development of NASA Crawler/Transporter Tread Belt Shoe Castings

Science.gov (United States)

Parker, Donald S.

2006-01-01

The NASA Crawler/Transporters (CT-1 and CT-2) used to transport the Space Shuffles are one of the largest tracked vehicles in existence today. Two of these machines have been used to move space flight vehicles at Kennedy Space Center since the Apollo missions of the 1960's and relatively few modifications have been made to keep them operational. In September of 2003 during normal Crawler/Transporter operations cracks were observed along the roller pad surfaces of several tread belt shoes. Further examination showed 20 cracked shoes on CT-1 and 40 cracked shoes on CT-2 and a formal failure analysis investigation was undertaken while the cracked shoes were replaced. Six shoes were cross-sectioned with the fracture surfaces exposed and it was determined that the cracks were due to fatigue that initiated on the internal casting web channels at pre-existing casting defects and propagated through thickness both transgranularly and intergranularly between internal shrinkage cavities, porosity, and along austenitic and ferritic grain boundaries. The original shoes were cast during the 1960's using a modified 861330 steel with slightly higher levels of chromium, nickel and molybdenum followed by heat treatment to achieve a minimum tensile strength of 11 Oksi. Subsequent metallurgical analysis of the tread belt shoes after multiple failures showed excessive internal defects, alloy segregation, a nonuniform ferritic/ bainitic/martensitic microstructure, and low average tensile properties indicative of poor casting and poor heat-treatment. As a result, NASA funded an initiative to replace all of the tread belt shoes on both crawler/transporters along with a redesign of the alloy, manufacturing, and heat-treatment to create a homogeneous cast structure with uniform mechanical and metallurgical properties. ME Global, a wholly owned subsidiary of ME Elecmetal based in Minneapolis, MN was selected as manufacturing and design partner to develop the new shoes and this paper

Perspectives regarding the use of metallurgical slags as secondary metal resources - A review of bioleaching approaches.

Science.gov (United States)

Potysz, Anna; van Hullebusch, Eric D; Kierczak, Jakub

2018-05-05

Smelting activity by its very nature produces large amounts of metal-bearing waste, often called metallurgical slag(s). In the past, industry used to dispose of these waste products at dumping sites without the appropriate environmental oversight. Once there, ongoing biogeochemical processes affect the stability of the slags and cause the release of metallic contaminants. Rather than viewing metallurgical slags as waste, however, such deposits should be viewed as secondary metal resources. Metal bioleaching is a "green" treatment route for metallurgical slags, currently being studied under laboratory conditions. Metal-laden leachates obtained at the bioleaching stage have to be subjected to further recovery operations in order to obtain metal(s) of interest to achieve the highest levels of purity possible. This perspective paper considers the feasibility of the reuse of base-metal slags as secondary metal resources. Special focus is given to current laboratory bioleaching approaches and associated processing obstacles. Further directions of research for development of more efficient methods for waste slag treatment are also highlighted. The optimized procedure for slag treatment is defined as the result of this review and should include following steps: i) slag characterization (chemical and phase composition and buffering capacity) following the choice of initial pH, ii) the choice of particle size, iii) the choice of the liquid-to-solid ratio, iv) the choice of microorganisms, v) the choice of optimal nutrient supply (growth medium composition). An optimal combination of all these parameters will lead to efficient extraction and generation of metal-free solid residue. Copyright © 2018 Elsevier Ltd. All rights reserved.

Who's making global civil society: philanthropy and US empire in world society.

Science.gov (United States)

Vogel, Ann

2006-12-01

Theories of US hegemony commonly ignore the role of American philanthropy in the contemporary transformations of world society and the globalization of capitalism. In this essay, I suggest that the philanthropic foundation, and with it the institution of philanthropy, is being invigorated by the expansion of its domestic role to foreign activities and to globally framed activities within the USA. I propose that US philanthropy exports American understandings of democracy and simultaneously organizes global reflexivity through citizenship education for the US populace. I offer a preliminary theoretical interpretation of the empirical patterns of international grant-making activities by US foundations, considering John W. Meyer's concept of 'instrumental culture' and some arguments made by Foucauldian 'governmentality' scholars. I emphasize the need to conceptualize the cultural-symbolic and organizational dimensions of hegemony and suggest further sociological analysis of philanthropic activities as integral to current politically and economically led transformations of societies around the globe.

Effective recruitment method for the marketing department of a metallurgical enterprise

Directory of Open Access Journals (Sweden)

E. Jaba

2014-04-01

Full Text Available This paper presents some solutions to recruit staff for the Marketing Department of a metallurgical enterprise. Our goal is to present the psychological characteristics of a certain category of employees on a sample of 107 employees and to evaluate the relationship between the motivation to work and those characteristics. In order to realize such evaluation we used the linear mixed effects model in the statistical software program R. The results showed that a significant effect on work motivation have factors like work climate and the employee agreeability.

A multi-level code for metallurgical effects in metal-forming processes

Energy Technology Data Exchange (ETDEWEB)

Taylor, P.A.; Silling, S.A. [Sandia National Labs., Albuquerque, NM (United States). Computational Physics and Mechanics Dept.; Hughes, D.A.; Bammann, D.J.; Chiesa, M.L. [Sandia National Labs., Livermore, CA (United States)

1997-08-01

The authors present the final report on a Laboratory-Directed Research and Development (LDRD) project, A Multi-level Code for Metallurgical Effects in metal-Forming Processes, performed during the fiscal years 1995 and 1996. The project focused on the development of new modeling capabilities for simulating forging and extrusion processes that typically display phenomenology occurring on two different length scales. In support of model fitting and code validation, ring compression and extrusion experiments were performed on 304L stainless steel, a material of interest in DOE nuclear weapons applications.

Summary of presentations from the 46th Annual Meeting of the American Society of Clinical Oncology: focus on non-small cell lung cancer (2010).

Science.gov (United States)

Stinchcombe, Thomas E; Baggstrom, Maria Q; Somaiah, Neeta; Simon, George R; Govindan, Ramaswamy

2011-01-01

The promising results of crizotinib in molecularly selected patients with advanced non-small cell lung cancer (NSCLC) whose tumor cells had a novel fusion protein involving anaplastic lymphoma kinase presented at the 2010 American Society of Clinical Oncology reinforce once again the importance of understanding molecular heterogeneity of lung cancer and careful patient selection. Several other important issues were the subject of presentations related to lung cancer at the recently concluded American Society of Clinical Oncology annual meeting. The articles covered a wide variety of topics including optimal staging techniques to detect mediastinal nodal involvement, the role of platinum-based doublet chemotherapy in the management of elderly patients with advanced NSCLC, use of maintenance therapy with gemcitabine, and the impact of early introduction of organized palliative care in improving the quality of life of patients with advanced NSCLC. This report provides a brief overview of the presentations related to lung cancer that are relevant to clinical practice and future research.

Autoimmune Retinopathy: Current Concepts and Practices (An American Ophthalmological Society Thesis).

Science.gov (United States)

Sen, H Nida; Grange, Landon; Akanda, Marib; Fox, Austin

2017-08-01

To elicit and evaluate opinions in the diagnosis and management of nonparaneoplastic autoimmune retinopathy (npAIR) among members of the American Uveitis Society (AUS) and to further the development of consensus and criteria in the diagnosis and management of npAIR. We hypothesize that despite lack of any clear guidelines, a general consensus in the clinical diagnosis and treatment of npAIR exists among uveitis experts. A literature review was performed and a panel of uveitis experts was consulted to formulate a survey regarding the diagnosis and management of npAIR. An online survey of 10 questions was developed, and a link was distributed through the AUS membership discussion list. We defined "general consensus" as meaning that a majority (>50%) of the respondents provided the same answer to a question. Fifty-four members of the AUS responded to the survey. Thirty-eight members (70.4%) see one to three AIR patients per year. Greater than 50% consensus was reached on most items, particularly items relating to diagnostic features and tests (up to 96% consensus). The diagnosis and management of npAIR is challenging, as standardized clinical and laboratory diagnostic criteria have yet to be established. The results of this study support the presence of consensus regarding certain aspects of npAIR, but also indicate the need for developing clear clinical diagnostic criteria and treatment guidelines.

American Thoracic Society member survey on climate change and health.

Science.gov (United States)

Sarfaty, Mona; Bloodhart, Brittany; Ewart, Gary; Thurston, George D; Balmes, John R; Guidotti, Tee L; Maibach, Edward W

2015-02-01

The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed a random sample of ATS members to assess their perceptions of, clinical experiences with, and preferred policy responses to climate change. An e-mail containing an invitation from the ATS President and a link to an online survey was sent to 5,500 randomly selected U.S. members; up to four reminder e-mails were sent to nonrespondents. Responses were received from members in 49 states and the District of Columbia (n = 915); the response rate was 17%. Geographic distribution of respondents mirrored that of the sample. Survey estimates' confidence intervals were ±3.5% or smaller. Results indicate that a large majority of ATS members have concluded that climate change is happening (89%), that it is driven by human activity (68%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (65%). A majority of respondents indicated they were already observing health impacts of climate change among their patients, most commonly as increases in chronic disease severity from air pollution (77%), allergic symptoms from exposure to plants or mold (58%), and severe weather injuries (57%). A larger majority anticipated seeing these climate-related health impacts in the next 2 decades. Respondents indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. Overall, ATS members are observing that human health is already adversely affected by climate change and support responses to address this situation.

Validation of the Infectious Diseases Society of America/American Thoracic Society criteria to predict severe community-acquired pneumonia caused by Streptococcus pneumoniae.

Science.gov (United States)

Kontou, Paschalina; Kuti, Joseph L; Nicolau, David P

2009-10-01

Severe community-acquired pneumonia (CAP) is usually defined as pneumonia that requires intensive care unit (ICU) admission; the primary pathogen responsible for ICU admission is Streptococcus pneumoniae. In this study, the 2007 Infectious Diseases Society of America/American Thoracic Society (IDSA/ATS) consensus criteria for ICU admission were compared with other severity scores in predicting ICU admission and mortality. We retrospectively studied 158 patients with pneumococcal CAP (1999-2003). Clinical and laboratory features at the emergency department were recorded and used to calculate the 2007 IDSA/ATS rule, the 2001 ATS rule, 2 modified 2007 IDSA/ATS rules, the Pneumonia Severity Index (PSI), and the CURB (confusion, urea, respiratory rate, blood pressure) score. The sensitivity, specificity, positive predictive value, and negative predictive value (NPV) were assessed for the various indices. We also determined the criteria that were independently predictive of ICU admission and of mortality in our population. The 2007 IDSA/ATS criteria performed as well as the 2001 ATS rule in predicting ICU admission both demonstrated high sensitivity (90%) and NPV (97%). For the prediction of mortality, the best tool proved to be the PSI score (sensitivity, 95%; NPV, 99%). The variables associated with ICU admission in this patient population included tachypnea, confusion, Pao(2)/Fio(2) ratio of 250 or lower, and hypotension requiring fluid resuscitation. Mechanical ventilation and PSI class V were independently associated with mortality. This study confirms the usefulness of the new criteria in predicting severe CAP. The 2001 ATS criteria seem an attractive alternative because they are simple and as effective as the 2007 IDSA/ATS criteria.

An official American Thoracic Society/International Society for Heart and Lung Transplantation/Society of Critical Care Medicine/Association of Organ and Procurement Organizations/United Network of Organ Sharing Statement: ethical and policy considerations in organ donation after circulatory determination of death.

Science.gov (United States)

Gries, Cynthia J; White, Douglas B; Truog, Robert D; Dubois, James; Cosio, Carmen C; Dhanani, Sonny; Chan, Kevin M; Corris, Paul; Dark, John; Fulda, Gerald; Glazier, Alexandra K; Higgins, Robert; Love, Robert; Mason, David P; Nakagawa, Thomas A; Shapiro, Ron; Shemie, Sam; Tracy, Mary Fran; Travaline, John M; Valapour, Maryam; West, Lori; Zaas, David; Halpern, Scott D

2013-07-01

Donation after circulatory determination of death (DCDD) has the potential to increase the number of organs available for transplantation. Because consent and management of potential donors must occur before death, DCDD raises unique ethical and policy issues. To develop an ethics and health policy statement on adult and pediatric DCDD relevant to critical care and transplantation stakeholders. A multidisciplinary panel of stakeholders was convened to develop an ethics and health policy statement. The panel consisted of representatives from the American Thoracic Society, Society of Critical Care Medicine, International Society for Heart and Lung Transplantation, Association of Organ Procurement Organizations, and the United Network of Organ Sharing. The panel reviewed the literature, discussed important ethics and health policy considerations, and developed a guiding framework for decision making by stakeholders. A framework to guide ethics and health policy statement was established, which addressed the consent process, pre- and post mortem interventions, the determination of death, provisions of end-of-life care, and pediatric DCDD. The information presented in this Statement is based on the current evidence, experience, and clinical rationale. New clinical research and the development and dissemination of new technologies will eventually necessitate an update of this Statement.

Municipal solid waste disposal by using metallurgical technologies and equipments

Energy Technology Data Exchange (ETDEWEB)

Cai, Jiuju; Sun, Wenqiang [State Environmental Protection Key Laboratory of Eco-industry, Institute of Thermal and Environmental Engineering, Northeastern University, Shenyang 110819 (China)

2012-07-01

Pyrolysis of municipal solid waste can take full advantage of energy and resource and avoid producing hazardous material during this period. In combination with mature metallurgical technologies of coking by coke oven, regenerative flame furnace technology and melting by electric arc furnace, technologies of regenerative fixed bed pyrolysis technology for household waste, co-coking technology for waste plastic and blend coal, and incineration ash melting technology by electric arc technology for medical waste were respectively developed to improve current unsatisfied sorting status of waste. The investigation results of laboratory experiments, semi-industrial experiments and industrial experiments as well as their economic benefits and environmental benefits for related technologies were separately presented.

The Influence of Biblical Culture on American Spiritual Civilization

Institute of Scientific and Technical Information of China (English)

李惠子

2014-01-01

Biblical culture is deeply rooted into current American society and culture,widely impacting every aspect of American people’s life.Through discussing about the historical accumulation of biblical culture reflected in America’s societal and spiritual civilization,this essay analyses the importance and function of biblical culture from the aspect of society inheritance,value,literature creation and customs etc.,helping us to further understand and study American society and culture.

The Influence of Biblical Culture on American Spiritual Civilization

Institute of Scientific and Technical Information of China (English)

李惠子

2014-01-01

Biblical culture is deeply rooted into current American society and culture, widely impacting every aspect of American people’s life. Through discussing about the historical accumulation of biblical culture reflected in America’s societal and spiritual civilization, this essay analyses the importance and function of biblical culture from the aspect of society inheritance, value, literature creation and customs etc., helping us to further understand and study American society and culture.

Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels

Directory of Open Access Journals (Sweden)

Fritz Klocke

2011-01-01

Full Text Available In this experimental study, the cutting performance of ball-end mills in high-speed dry-hard milling of powder metallurgical steels was investigated. The cutting performance of the milling tools was mainly evaluated in terms of cutting length, tool wear, and cutting forces. Two different types of hardened steels were machined, the cold working steel HS 4-2-4 PM (K490 Microclean/66 HRC and the high speed steel HS 6-5-3 PM (S790 Microclean/64 HRC. The milling tests were performed at effective cutting speeds of 225, 300, and 400 m/min with a four fluted solid carbide ball-end mill (0 = 6, TiAlN coating. It was observed that by means of analytically optimised chipping parameters and increased cutting speed, the tool life can be drastically enhanced. Further, in machining the harder material HS 4-2-4 PM, the tool life is up to three times in regard to the less harder material HS 6-5-3 PM. Thus, it can be assumed that not only the hardness of the material to be machined plays a vital role for the high-speed dry-hard cutting performance, but also the microstructure and thermal characteristics of the investigated powder metallurgical steels in their hardened state.

America's Scholarly Societies Raise Their Flags Abroad.

Science.gov (United States)

McMurtrie, Beth

2000-01-01

Reports that greater numbers of scholarly societies, though American in name, are increasingly international in membership and outlook. Suggests that this trend has been driven by the expanding global outlook of scholars, the collapse of communism, and growth of the Internet. Efforts to encourage local professional societies, fears of American…

Metals, words and gods. Early knowledge of metallurgical skills in Europe, and reflections in terminology

Directory of Open Access Journals (Sweden)

Solin Paliga

1993-12-01

Full Text Available How can metallurgical terminology - specifically names of metals - support ar­ chaeological investigation? Can comparative linguistics and archaeology co-operate in order to identify the emergence and development of metallurgical skills? How did Neolithic and Bronze Age man imagine the taming of nature in order to achieve metal artifacts? Such questions -and many others -may arise whenever we try to investigate the beginnings and making of civilization. It is clear that the various aspects connected to archaeometallurgy cannot be analyzed separately from other aspects of human life, like agriculture, trade, urbanization, religious beliefs, early writing systems, pottery techniques, a.o. The earliest known (or identifiable names of metals do reflect a cer­ tain ideology and a certain way of 'seeing' metals as imbued with magic powers. It is certain that colours and reflections - specific to metals - made early man interpret them as divine (Biek and Bayley 1979; Muşu 1981, chapter Symphony of colours, a first attempt in reconstructing pre-Greek names of colours.

[Hygienic assessment of metal-lurgical slag crushed stone for its use in road-building].

Science.gov (United States)

Tikhomirov, Iu P; Ippolitova, V P; Bezrokov, M E

2010-01-01

The increasing amount of industrial waste generates a need for its use as recycled materials. The paper presents the results of hygienic assessment of metallurgic slag crushed stone to be added to natural materials in highway building. The research program has included the measurement of content of water-soluble forms of metals, the evaluation of the acute toxicity of waste after oral administration to mice and rats, the study of the toxicity of waste by biotesting and the activity of natural radionuclides. The slag crushed stone virtually lacks water-soluble elements when it contains a high level of bulk forms of metals. According to acute toxicity for warm-blooded animals, the slag crushed stone belongs to Hazard Class IV by GOST 12.1.007-76 (low hazard substances). The biotesting on hydrocoles, the slag crushed stone is also referred to as Class IV (low hazard substances). In terms of the level of natural radionuclides, the slag crushed stone poses no hazard to the environment. The performed studies give grounds to recommend metallurgical slag crushed stone to be added to natural materials for highway building.

Women otolaryngologist representation in specialty society membership and leadership positions.

Science.gov (United States)

Choi, Sukgi S; Miller, Robert H

2012-11-01

To determine the proportion of female otolaryngologists in leadership positions relative to their number in the specialty, their membership in various otolaryngology organizations, and age. Cross-sectional analyses of otolaryngology organization membership with a subgroup analysis on female membership and leadership proportion comparing 5-year male/female cohort groups. Information on the number of members and leaders was obtained from various specialty societies by direct communication and from their Web sites between June and December 2010. The number of female and male otolaryngologists and their age distribution in 5-year age groups was obtained from the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS). Statistical analyses were used to determine whether women had proportional membership and leadership representation in various specialty societies. Additionally, female representation in other leadership roles was analyzed using the male/female ratio within the 5-year cohort groups. Female otolaryngologists were found to constitute approximately 11% of practicing otolaryngologists. The American Society of Pediatric Otolaryngology had a higher proportion of female members (22%) compared to five other societies. When the gender composition within each organization was taken into account, female representation in specialty society leadership positions was proportionate to their membership across all societies. When gender and age were considered, women have achieved proportionate representation in each of the specialty societies' leadership positions. There was also proportionate representation of females as program directors, American Board of Otolaryngology directors, Residency Review Committee members, and journal editors/editorial board members. Finally, fewer female chairs or chiefs of departments/divisions were seen, but when age was taken into consideration, this difference was no longer significant. Women have achieved parity in

Study on the effect of heat treatment and gasification on the carbon structure of coal chars and metallurgical cokes using fourier transform Raman spectroscopy

Energy Technology Data Exchange (ETDEWEB)

S. Dong; P. Alvarez; N. Paterson; D.R. Dugwell; R. Kandiyoti [Imperial College London, London (United Kingdom). Department of Chemical Engineering

2009-03-15

Differences in the development of carbon structures between coal chars and metallurgical cokes during high-temperature reactions have been investigated using Raman spectroscopy. These are important to differentiate between different types of carbons in dust recovered from the top gas of the blast furnace. Coal chars have been prepared from a typical injectant coal under different heat-treatment conditions. These chars reflected the effect of peak temperature, residence time at peak temperature, heating rate and pressure on the evolution of their carbon structures. The independent effect of gasification on the development of the carbon structure of a representative coal char has also been studied. A similar investigation has also been carried out to study the effect of heat-treatment temperature (from 1300 to 2000{sup o}C) and gasification on the carbon structure of a typical metallurgical coke. Two Raman spectral parameters, the intensity ratio of the D band to the G band (I{sub D}/I{sub G}) and the intensity ratio of the valley between D and G bands to the G band (I{sub V}/I{sub G}), have been found useful in assessing changes in carbon structure. An increase in I{sub D}/I{sub G} indicates the growth of basic graphene structural units across the temperature range studied. A decrease in I{sub V}/I{sub G} appears to suggest the elimination of amorphous carbonaceous materials and ordering of the overall carbon structure. The Raman spectral differences observed between coal chars and metallurgical cokes are considered to result from the difference in the time-temperature history between the raw injectant coal and the metallurgical coke and may lay the basis for differentiation between metallurgical coke fines and coal char residues present in the dust carried over the top of the blast furnace. 41 refs., 17 figs., 3 tabs.

Vapor Pressure and Predicted Stability of American Contact Dermatitis Society Core Allergens

Science.gov (United States)

Jou, Paul C.; Siegel, Paul D.; Warshaw, Erin M.

2018-01-01

Background Accurate patch testing is reliant on proper preparation of patch test allergens. The stability of patch test allergens is dependent on several factors including vapor pressure (VP). Objective This investigation reviews the VP of American Contact Dermatitis Society Core Allergens and compares stability predictions based on VP with those established through clinical testing. Methods Standard references were accessed for determining VP in millimeters of mercury and associated temperature in degrees celsius. If multiple values were listed, VP at temperatures that most approximate indoor storage conditions (20°C and 25°C) were chosen. For mixes, the individual component with the highest VP was chosen as the overall VP, assuming that the most volatile substance would evaporate first. Antigens were grouped into low (≤0.001 mm Hg), moderate (0.001 mm Hg), and high (≥1 mm Hg) volatility using arbitrary cutoff values. Conclusions This review is consistent with previously reported data on formaldehyde, acrylates, and fragrance material instability. Given lack of testing data, VP can be useful in predicting patch test compound stability. Measures such as air-tight multidose reagent containers, sealed single-application dispensers, preparation of patches immediately before application, and storage at lower temperatures may remedy some of these issues. PMID:27427821

New Strategies and Challenges in Lung Proteomics and Metabolomics. An Official American Thoracic Society Workshop Report.

Science.gov (United States)

Bowler, Russell P; Wendt, Chris H; Fessler, Michael B; Foster, Matthew W; Kelly, Rachel S; Lasky-Su, Jessica; Rogers, Angela J; Stringer, Kathleen A; Winston, Brent W

2017-12-01

This document presents the proceedings from the workshop entitled, "New Strategies and Challenges in Lung Proteomics and Metabolomics" held February 4th-5th, 2016, in Denver, Colorado. It was sponsored by the National Heart Lung Blood Institute, the American Thoracic Society, the Colorado Biological Mass Spectrometry Society, and National Jewish Health. The goal of this workshop was to convene, for the first time, relevant experts in lung proteomics and metabolomics to discuss and overcome specific challenges in these fields that are unique to the lung. The main objectives of this workshop were to identify, review, and/or understand: (1) emerging technologies in metabolomics and proteomics as applied to the study of the lung; (2) the unique composition and challenges of lung-specific biological specimens for metabolomic and proteomic analysis; (3) the diverse informatics approaches and databases unique to metabolomics and proteomics, with special emphasis on the lung; (4) integrative platforms across genetic and genomic databases that can be applied to lung-related metabolomic and proteomic studies; and (5) the clinical applications of proteomics and metabolomics. The major findings and conclusions of this workshop are summarized at the end of the report, and outline the progress and challenges that face these rapidly advancing fields.

Selection of human capital in metallurgical companies using information technology (IT

Directory of Open Access Journals (Sweden)

I. Iancu

2013-10-01

Full Text Available Personnel selection is a process that takes place in a company in order to have better business performance and competitive advantage. Nowadays, companies have realized the importance of human capital as a necessity for survival in today’s competitive market. There are several methods for selecting staff, but this paper seeks to demonstrate that this selection can be done with the help of an expert system. Metallurgical companies face even greater challenges for managing personnel selection. This research will discover and test the key elements of management personnel selection and implementation of an expert system.

The American Society of Shoulder and Elbow Therapists' consensus statement on rehabilitation following arthroscopic rotator cuff repair.

Science.gov (United States)

Thigpen, Charles A; Shaffer, Michael A; Gaunt, Bryce W; Leggin, Brian G; Williams, Gerald R; Wilcox, Reg B

2016-04-01

This is a consensus statement on rehabilitation developed by the American Society of Shoulder and Elbow Therapists. The purpose of this statement is to aid clinical decision making during the rehabilitation of patients after arthroscopic rotator cuff repair. The overarching philosophy of rehabilitation is centered on the principle of the gradual application of controlled stresses to the healing rotator cuff repair with consideration of rotator cuff tear size, tissue quality, and patient variables. This statement describes a rehabilitation framework that includes a 2-week period of strict immobilization and a staged introduction of protected, passive range of motion during weeks 2-6 postoperatively, followed by restoration of active range of motion, and then progressive strengthening beginning at postoperative week 12. When appropriate, rehabilitation continues with a functional progression for return to athletic or demanding work activities. This document represents the first consensus rehabilitation statement developed by a multidisciplinary society of international rehabilitation professionals specifically for the postoperative care of patients after arthroscopic rotator cuff repair. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Psychological Aspects of European Cosmology in American Society: African and European Cultures.

Science.gov (United States)

Baldwin, Joseph A.

1985-01-01

Discusses the Eurocentric nature of the United States social reality, and investigates psychological and mental health implications for the African-American community. Outlines the basic themes, emphases and criteria of Euro-American cosmology and describes how it can come to dominate the Afro-American's self-consciousness. Suggests ways to…

Evaluation of American Indian Science and Engineering Society Intertribal Middle School Science and Math Bowl Project

Energy Technology Data Exchange (ETDEWEB)

AISES, None

2013-09-25

The American Indian Science and Engineering Society (AISES) has been funded under a U.S. Department of Energy (DOE) grant (Grant Award No. DE-SC0004058) to host an Intertribal Middle-School Science and Math Bowl (IMSSMB) comprised of teams made up of a majority of American Indian students from Bureau of Indian Education-funded schools and public schools. The intent of the AISES middle school science and math bowl is to increase participation of American Indian students at the DOE-sponsored National Science Bowl. Although national in its recruitment scope, the AISES Intertribal Science and Math Bowl is considered a “regional” science bowl, equivalent to the other 50 regional science bowls which are geographically limited to states. Most regional bowls do not have American Indian student teams competing, hence the AISES bowl is meant to encourage American Indian student teams to increase their science knowledge in order to participate at the national level. The AISES competition brings together teams from various American Indian communities across the nation. Each team is provided with funds for travel to and from the event, as well as for lodging and meals. In 2011 and 2012, there were 10 teams participating; in 2013, the number of teams participating doubled to 20. Each Science and Math Bowl team is comprised of four middle school — grades 6 through 8 — students, one alternate, and a teacher who serves as advisor and coach — although in at least two cases, the coach was not a teacher, but was the Indian Education Coordinator. Each team member must have at least a 3.0 GPA. Furthermore, the majority of students in each team must be comprised of American Indian, Alaska Native or Native Hawaiian students. Under the current DOE grant, AISES sponsored three annual middle school science bowl competitions over the years 2011, 2012 and 2013. The science and math bowls have been held in late March concurrently with the National American Indian Science and

Powder metallurgical high performance materials. Proceedings. Volume 4: late papers

Energy Technology Data Exchange (ETDEWEB)

Kneringer, G; Roedhammer, P; Wildner, H [eds.

2001-07-01

This is the fourth volume (late papers) of the 15th International Plansee seminar 2001 which general theme was 'Powder metallurgical high performance materials'. The seminar looked beyond the refractory metals and cemented carbides, which remain as its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. This volume 4 contains papers dealing with high performance P/M metals (ITER and fusion reactors, solid targets, materials microstructure, novel alloys, etc.), P/M hard materials ( production and characterization, tungsten carbides, titanium carbides, microstructural design, coatings composition and performance, etc.) and general topics. From 37 papers 24 correspond to INIS subject scope and they were indexed separately. (nevyjel)

Characterization of Nanocarbon Copper Composites Manufactured in Metallurgical Synthesis Process

Science.gov (United States)

Knych, Tadeusz; Kwaśniewski, Paweł; Kiesiewicz, Grzegorz; Mamala, Andrzej; Kawecki, Artur; Smyrak, Beata

2014-08-01

Currently, there is a worldwide search for new forms of materials with properties that are significantly improved in comparison to materials currently in use. One promising research direction lies in the synthesis of metals containing modern carbon materials ( e.g., graphene, nanotubes). In this article, the research results of metallurgical synthesis of a mixture of copper and two different kinds of carbon (activated carbon and multiwall carbon nanotubes) are shown. Samples of copper-carbon nanocomposite were synthesized by simultaneously exposing molten copper to an electrical current while vigorously stirring and adding carbon while under an inert gas atmosphere. The article contains research results of density, hardness, electrical conductivity, structure (TEM), and carbon decomposition (SIMS method) for the obtained materials.

Powder metallurgical high performance materials. Proceedings. Volume 4: late papers

International Nuclear Information System (INIS)

Kneringer, G.; Roedhammer, P.; Wildner, H.

2001-01-01

This is the fourth volume (late papers) of the 15th International Plansee seminar 2001 which general theme was 'Powder metallurgical high performance materials'. The seminar looked beyond the refractory metals and cemented carbides, which remain as its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. This volume 4 contains papers dealing with high performance P/M metals (ITER and fusion reactors, solid targets, materials microstructure, novel alloys, etc.), P/M hard materials ( production and characterization, tungsten carbides, titanium carbides, microstructural design, coatings composition and performance, etc.) and general topics. From 37 papers 24 correspond to INIS subject scope and they were indexed separately. (nevyjel)

Optimization Review: Bunker Hill Mining and Metallurgical Complex Superfund Site, Central Treatment Plant (CTP), Kellogg, Shoshone County, Idaho

Science.gov (United States)

The Bunker Hill Mining and Metallurgical Complex Superfund Site includes all areas of the Coeur d’Alene Basin where mining-related contamination occurred and encompasses a 21-square mile “Box” along Interstate 90 surrounding the former smelter complex.

THE MODELS OF THE MANAGEMENT OPTIMIZATION OF THE ORGANIZATIONAL STRUCTURES OF RUP “BELORUSSIAN METALLURGICAL WORKS”

Directory of Open Access Journals (Sweden)

A. N. Chichko

2006-01-01

Full Text Available The new approach to the mathematic modeling and optimization of interrelation of the control units of the metallurgical enterprise organizational structures is offered. The mathematical model of the organizational structure based on temporary characteristics of control units loading is offered at the example of one of the organizational structures BMZ.

Cryogenic treatment of steel: from concept to metallurgical understanding

DEFF Research Database (Denmark)

Villa, Matteo; Somers, Marcel A. J.

2017-01-01

, the metallurgical understanding of the microstructural changes involved in cryogenic treatment of steel has remained poor. It is believed that the improvement in wear resistance is promoted by an enhanced precipitation of carbides during tempering, but no explanation has been given as to how this enhanced......Subjecting steel to cryogenic treatment to improve its properties was conceived in the 30ies of the previous century. The proof of concept that properties, in particular wear resistance, can indeed be improved importantly, was reported in the next decades. Despite many investigations...... precipitation can be obtained. In the last six years, the authors have applied in situ magnetometry, synchrotron X-Ray Diffraction and dilatometry to enlighten the phase transitions occurring in steels at cryogenic temperatures and to point out the connection between different treatment parameters...

FINDING WAYS OF RECYCLING DUST OF ARC STEEL FURNACES AT THE BELARUSIAN METALLURGIC PLANT

Directory of Open Access Journals (Sweden)

A. V. Demin

2015-01-01

Full Text Available The first part examines the theoretical possibility of recycling dust of arc steel furnaces. The different modes of dust disposal depending on the task of recycling are discussed: recycling at minimal cost; recycling with a maximum extraction of iron; recycling with maximum extraction of zinc. The results of laboratory studies providing information on the technical feasibility of recycling dust formed at the Belarusian metallurgic plant are provided.

Investigations for decision making on an old tailing pond of a former experimental metallurgical plant

International Nuclear Information System (INIS)

Razikov, Z.A.; Pavljuk, L.M.; Bezzubov, N.I.

2002-01-01

Investigations are described on an abandoned tailing pond of a former experimental metallurgical plant which operated during the period 1945-1950. The aim of these investigations was to explore radiological hazards arising from the tailing pond for the population and to obtain data for decision making on redeployment or dumping of the pond. Methods used, results obtained and conclusions drawn are outlined. (author)

Metallurgical Laboratory Hazardous Waste Management Facility groundwater monitoring report: Third quarter 1993

International Nuclear Information System (INIS)

1993-12-01

During third quarter 1993, samples from AMB groundwater monitoring wells at the Metallurgical Laboratory Hazardous Waste Management Facility were analyzed for certain heavy metals, indicator parameters, radionuclides, volatile organic compounds, and other constituents. Eight parameters exceeded standards during the quarter. As in previous quarters, tetrachloroethylene and trichloroethylene exceeded final Primary Drinking Water Standards; and aluminum, iron, lead, manganese, pH, and total organic halogens exceeded the Savannah River Site Flag 2 criteria in one or more of the wells. Groundwater flow direction and rate in the water-table unit were similar to previous quarters

Success of an International Learning Health Care System in Hematopoietic Cell Transplantation: The American Society of Blood and Marrow Transplantation Clinical Case Forum.

Science.gov (United States)

Barba, Pere; Burns, Linda J; Litzow, Mark R; Juckett, Mark B; Komanduri, Krishna V; Lee, Stephanie J; Devlin, Sean M; Costa, Luciano J; Khan, Shakila; King, Andrea; Klein, Andreas; Krishnan, Amrita; Malone, Adriana; Mir, Muhammad; Moravec, Carina; Selby, George; Roy, Vivek; Cochran, Melissa; Stricherz, Melisa K; Westmoreland, Michael D; Perales, Miguel-Angel; Wood, William A

2016-03-01

The American Society for Blood and Marrow Transplantation (ASBMT) Clinical Case Forum (CCF) was launched in 2014 as an online secure tool to enhance interaction and communication among hematopoietic cell transplantation (HCT) professionals worldwide through the discussion of challenging clinical care issues. After 14 months, we reviewed clinical and demographical data of cases posted in the CCF from January 29, 2014 to March 18, 2015. A total of 137 cases were posted during the study period. Ninety-two cases (67%) were allogeneic HCT, 29 (21%) were autologous HCT, and in 16 (12%), the type of transplantation (autologous versus allogeneic) was still under consideration. The diseases most frequently discussed included non-Hodgkin lymphoma (NHL; n = 30, 22%), acute myeloid leukemia (n = 23, 17%), and multiple myeloma (MM; n = 20, 15%). When compared with the US transplantation activity reported by the US Department of Health and Human Services, NHL and acute lymphoblastic leukemia cases were over-represented in the CCF, whereas MM was under-represented (P educational and research perspectives. Copyright © 2016 American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

The American Dream

OpenAIRE

Önnerth, Lars; Neubert, Mikkel; Omerbasic, Dejan; Heyman, Minch; Kimberly, Marie; Nielsen, Lyngbo; Mynte, Anne; Hørlyck Kaastrup, Markus

2015-01-01

This study examines the phenomenon that is the American Dream and its effect on the working and upper class citizens in American society. To give context to the American dream and its origin, we have made use of professor Jim Cullen’s book “The American Dream: A Short Story of an Idea that Shaped a Nation” from 2003. We have identified what we decided to call the “the traditional dream” and “the modern dream”, both representing different outlooks on lives and ethical standards. We have done t...

View from the Top: Perspectives on Women in Gastroenterology from Society Leaders.

Science.gov (United States)

Schmitt, Colleen M; Allen, John I

2016-06-01

Women are making great strides at all levels of medicine, including gastroenterology. The proportion of women members in gastroenterology societies has increased nearly 2-fold and the percent of women trainees is 36%. Although there continue to be challenges for women in academic and community practice, the American Gastroenterological Association, American Society of Gastrointestinal Endoscopy, and other gastroenterology societies have dedicated substantial resources to foster careers of women in gastroenterology and develop women as leaders in our societies. This article outlines ongoing challenges for women in gastroenterology and some key initiatives addressing barriers to success. Copyright © 2016 Elsevier Inc. All rights reserved.

An Experimental Copyright Moratorium: Study of a Proposed Solution to the Copyright Photocopying Problem. Final Report to the American Society for Testing and Materials (ASTM).

Science.gov (United States)

Heilprin, Laurence B.

The Committee to Investigate Copyright Problems (CICP), a non-profit organization dedicated to resolving the conflict known as the "copyright photocopying problem" was joined by the American Society for Testing and Materials (ASTM), a large national publisher of technical and scientific standards, in a plan to simulate a long-proposed…

Prevalence and interest in the practice of scratch testing for contact urticaria: a survey of the American contact dermatitis society members.

Science.gov (United States)

Orb, Quinn; Millsop, Jillian Wong; Harris, KaLynne; Powell, Douglas

2014-01-01

Contact urticaria (CU) is the development of a wheal and flare on the skin after topical exposure to a particular chemical or compound. It can be diagnosed through a variety of techniques. Many chemicals that cause a type IV allergy can also cause CU. The incidence of CU to these chemicals is unknown. The aim of this study was to evaluate the opinions of the American Contact Dermatitis Society members regarding CU and scratch testing. We distributed an electronic survey to the American Contact Dermatitis Society members regarding observed prevalence of CU, frequency of scratch testing in clinical practice, and interest in learning about scratch testing in diagnosing CU and other skin contact conditions. We distributed 508 surveys and received 133 responses. Seventeen percent reported that CU was extremely rare, 32% reported that CU was rare, and 38.9% reported that CU was infrequent. Alternatively, 10.7% believed that CU was common, and 1.5% believed that CU was extremely common. A minority, 19.1%, performed scratch testing on patients with suspected CU. Most respondents, 54.6%, were interested in learning about scratch testing. Additional education regarding scratch testing could increase comfort and use of scratch testing in clinical practice. Further studies are needed to evaluate the prevalence of CU in the general population and better guide the use of testing for dermatologic patients.

Marks in Latin-American radiology

International Nuclear Information System (INIS)

Souza Almeida, S. de.

1987-01-01

An historical retrospective of Latin-American radiology is shortly presented. Several radiologic societies as well as personalities, scientists and doctors are reported emphasizing their contribuition to radiologic Latin-American culture. (M.A.C.) [pt

Atypical subtrochanteric and diaphyseal femoral fractures: report of a task force of the American Society for Bone and Mineral Research

DEFF Research Database (Denmark)

Shane, Elizabeth; Burr, David; Ebeling, Peter R

2010-01-01

Reports linking long-term use of bisphosphonates (BPs) with atypical fractures of the femur led the leadership of the American Society for Bone and Mineral Research (ASBMR) to appoint a task force to address key questions related to this problem. A multidisciplinary expert group reviewed pertinent...... published reports concerning atypical femur fractures, as well as preclinical studies that could provide insight into their pathogenesis. A case definition was developed so that subsequent studies report on the same condition. The task force defined major and minor features of complete and incomplete...

Native American youth and justice

Directory of Open Access Journals (Sweden)

Dr.Sc. Laurence A. French

2012-12-01

Full Text Available Youth and delinquency issues have long been problematic among Native Americans groups both on- and off-reservation. This phenomenon is further complicated by the cultural diversity among American Indians and Alaska Natives scattered across the United States. In address these issues, the paper begins with a historical overview of Native American youth. This history presents the long tradition of federal policies that, how well intended, have resulted in discriminatory practices with the most damages attacks being those directed toward the destruction of viable cultural attributes – the same attributes that make Native Americans unique within United States society. Following the historical material, the authors contrast the pervasive Native American aboriginal ethos of harmony with that of Protestant Ethic that dominates the ethos of the larger United States society. In addition to providing general information on Native American crime and delinquency, the paper also provides a case study of Native American justice within the Navajo Nation, the largest tribe, in both size and population, in the United States. The paper concludes with a discussion of issues specific to Native American youth and efforts to address these problems.

Survey of International Members of the American Thoracic Society on Climate Change and Health.

Science.gov (United States)

Sarfaty, Mona; Kreslake, Jennifer; Ewart, Gary; Guidotti, Tee L; Thurston, George D; Balmes, John R; Maibach, Edward W

2016-10-01

The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed international members of the society to assess perceptions, clinical experiences, and preferred policy responses related to global climate change. A recruitment email was sent by the ATS President in October 2015 to 5,013 international members. Subsequently, four reminder emails were sent to nonrespondents. Responses were received from 489 members in 68 countries; the response rate was 9.8%. Half of respondents reported working in countries in Asia (25%) or Europe (25%), with the remainder in South America (18%), North America (Canada and Mexico) (18%), Australia or New Zealand (9%), and Africa (6%). Survey estimate confidence intervals were ± 5% or smaller. A high percentage of international ATS survey respondents judged that climate change is happening (96%), that it is driven by human activity (70%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (80%). A majority of respondents also indicated they are already observing health impacts of climate change among their patients; most commonly as increases in chronic disease severity from air pollution (88%), allergic symptoms from exposure to plants or mold (72%), and severe weather injuries (69%). An even larger majority anticipated seeing these climate-related health impacts in the next two decades. Respondents further indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. International ATS respondents, like their counterparts in the U.S., observed that human health is already adversely affected by climate change, and support responses to address this situation.

Metallurgical source-contribution analysis of PM10 annual average concentration: A dispersion modeling approach in moravian-silesian region

Directory of Open Access Journals (Sweden)

P. Jančík

2013-10-01

Full Text Available The goal of the article is to present analysis of metallurgical industry contribution to annual average PM10 concentrations in Moravian-Silesian based on means of the air pollution modelling in accord with the Czech reference methodology SYMOS´97.

Proceedings of the 2013 Meeting of the Australasian Section of the American Oil Chemists Society (AAOCS

Directory of Open Access Journals (Sweden)

Karen Murphy

2013-12-01

Full Text Available The Australasian section of the American Oil Chemists Society (AAOCS held their biennial meeting in Newcastle, Australia from 6 to 8 November, 2013. Over 150 scientists, researchers and industry representatives gathered for three days of talks and discussions on a variety of lipid related topics. The AAOCS awarded its inaugural AAOCS Award for Scientific Excellence in Lipid Research to Dr Allan Green from the Commonwealth Scientific and Industrial Research Organisation (CSIRO. Dr Green is deputy chief of the CSIRO Division of Plant Industry and has been active in lipid research for several decades. His main research focus is on plant breeding and genetic engineering techniques to develop improved oilseeds with enhanced human nutritional value and novel industrial uses. Refer to “AAOCS Award for Scientific Excellence in Lipid Research” for more detail of his contributions [1].

Interventional spine and pain procedures in patients on antiplatelet and anticoagulant medications: guidelines from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

Science.gov (United States)

Narouze, Samer; Benzon, Honorio T; Provenzano, David A; Buvanendran, Asokumar; De Andres, José; Deer, Timothy R; Rauck, Richard; Huntoon, Marc A

2015-01-01

Interventional spine and pain procedures cover a far broader spectrum than those for regional anesthesia, reflecting diverse targets and goals. When surveyed, interventional pain and spine physicians attending the American Society of Regional Anesthesia and Pain Medicine (ASRA) 11th Annual Pain Medicine Meeting exhorted that existing ASRA guidelines for regional anesthesia in patients on antiplatelet and anticoagulant medications were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors necessitated separate guidelines for pain and spine procedures. In response, ASRA formed a guidelines committee. After preliminary review of published complication reports and studies, committee members stratified interventional spine and pain procedures according to potential bleeding risk as low-, intermediate-, and high-risk procedures. The ASRA guidelines were deemed largely appropriate for the low- and intermediate-risk categories, but it was agreed that the high-risk targets required an intensive look at issues specific to patient safety and optimal outcomes in pain medicine. The latest evidence was sought through extensive database search strategies and the recommendations were evidence-based when available and pharmacology-driven otherwise. We could not provide strength and grading of these recommendations as there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations.

American Contact Dermatitis Society Contact Allergy Management Program: An Epidemiologic Tool to Quantify Ingredient Usage.

Science.gov (United States)

Scheman, Andrew; Severson, David

2016-01-01

The usage prevalence of ingredients in topical products is important to dermatologists and industry. To determine the prevalence of methylisothiazolinone (MI) in various types of consumer products The Contact Allergy Management Program (CAMP) database was mapped and sorted in spreadsheet format to determine the prevalence of MI in various types of consumer products. Methylisothiazolinone was found in 13.2% of 4660 total products in CAMP. High usage of MI was seen in dishwashing products (64%), shampoos (53%), bathroom/kitchen/all-purpose cleaners (47%), hair conditioners (45%), hair dyes (43%), laundry additives/fresheners/softeners (30%), soaps/cleansers (29%), and surface cleaners/disinfectants (27%). Of the products containing MI, MI alone (without methylchloroisothiazolinone) was most common in makeup products (100%), cleaning/dish/laundry products (>99%), moisturizers (82%), shaving products (78%), sunscreens (71%), and antiaging products (67%). The American Contact Dermatitis Society's CAMP is a valuable tool to collect epidemiologic data on the incidence of specific ingredient usage in various types of topical products.

Graphic Narratives and Cancer Prevention: A Case Study of an American Cancer Society Comic Book.

Science.gov (United States)

Krakow, Melinda

2017-05-01

As the interest in graphic medicine grows, health communicators have started engaging readers with compelling visual and textual accounts of health and illness, including via comic books. One context where comics have shown promise is cancer communication. This brief report presents an early example of graphic medicine developed by the American Cancer Society. "Ladies … Wouldn't It Be Better to Know?" is a comic book produced in the 1960s to provide the public with lay information about the Pap test for cervical cancer prevention and detection. An analysis of a key narrative attribute, plot development, illustrates the central role that perceived barriers played in this midcentury public health message, a component that remains a consideration of cancer communication design today. This case study of an early graphic narrative identifies promising cancer message features that can be used to address and refute barriers to cervical cancer screening and connects contemporary research with historical efforts in public health communication.

THE PROFITABILITY AND LIQUIDITY UNDER THE INFLUENCE OF THE FINANCING POLICY IN THE METALLURGICAL INDUSTRY OF EU 28

Directory of Open Access Journals (Sweden)

DOBROTĂ GABRIELA

2014-12-01

Full Text Available In the context of the problems of the economic system, the use of the capital and his structure represent important elements in the process of the financial decisions. The aim of this paper is to identify the influence of funding policy on rentability in metallurgical industry, dimensioned with the help of a set of relevant indicators, determined on the base of some aggregated data for a significant sample of very large firms from EU 28. Also, the paper present the situation of liquidity, reflected through the cash- flow and liquidity ratio, in the metallurgical industry of EU 28, being used dates for the period 2004 – 2013, for the mentioned sample. The conclusion of the realised study is that a funding policy well-founded, correlated with the efficient management of expenses and proactive risk management can positively influence the profitability and liquidity.

Cross-cultural examination of the structure of the Revised American Pain Society Patient Outcome Questionnaire (APS-POQ-R).

Science.gov (United States)

Botti, Mari; Khaw, Damien; Jørgensen, Emmy Brandt; Rasmussen, Bodil; Hunter, Susan; Redley, Bernice

2015-08-01

This study investigated the cross-cultural factor stability and internal consistency of the Revised American Pain Society Patient Outcome Questionnaire (APS-POQ-R), a measure of the quality of postoperative pain management used internationally. We conducted exploratory factor analysis (EFA) of APS-POQ-R data from 2 point prevalence studies comprising 268 and 311 surveys of Danish and Australian medical-surgical patients, respectively. Parallel analysis indicated 4- and 3-factor solutions for Danish and Australian patients, respectively, which accounted for 58.1% and 52.9% of variance. Internal consistency was unsatisfactory among both Danish (Cronbach α = .54) and Australian (Cronbach α = .63) cohorts. There was a high degree of between-group similarity in item-factor loadings of variables coded as "pain experience," but not "pain management." This finding reflected cross-cultural differences in ratings of treatment satisfaction. For Danish patients, satisfaction was associated with the degree of pain severity and activity interference, whereas for Australian patients, satisfaction was associated with their perceived ability to participate in treatment. To facilitate further cross-cultural comparison, we compared our findings with past research conducted in the United States and Iceland. EFA supported the construct validity of the APS-POQ-R as a measure of "pain experience" but indicated that items measuring "pain management" may vary cross-culturally. Findings highlighted the need for further validation of the APS-POQ-R internationally. This study revealed the APS-POQ-R as a valid measure of postoperative pain experience for Danish and Australian patients. Measures of patients' perception of pain management were not robust to group differences in treatment expectations and demonstrated cross-cultural instability. Results highlighted the difficulties in establishing stable cross-cultural, cross-population subscales for the APS-POQ-R. Copyright © 2015

Evaluation of powder metallurgical processing routes for multi-component niobium silicide-based high-temperature alloys

Energy Technology Data Exchange (ETDEWEB)

Seemueller, Hans Christoph Maximilian

2016-03-22

Niobium silicide-based composites are potential candidates to replace nickel-base superalloys for turbine applications. The goal of this work was to evaluate the feasibility and differences in ensuing properties of various powder metallurgical processing techniques that are capable of manufacturing net-shape turbine components. Two routes for powder production, mechanical alloying and gas atomization were combined with compaction via hot isostatic pressing and powder injection molding.

The identification of zones of amplification of disruptions in network supply chains of metallurgic products

Directory of Open Access Journals (Sweden)

M. Kramarz

2015-01-01

Full Text Available An increase in the number of participants in a supply chain and network relations results in an increase in the complexity of the entire logistic and production system. Consequently, there appear additional potential sources of disruptions in material flows. The aim of the research presented in the article is to identify the zones of amplification of disruptions in network supply chains of metallurgic products.

Process of optimization of district heat production by utilizing waste energy from metallurgical processes

Science.gov (United States)

Konovšek, Damjan; Fužir, Miran; Slatinek, Matic; Šepul, Tanja; Plesnik, Kristijan; Lečnik, Samo

2017-07-01

In a consortium with SIJ (Slovenian Steel Group), Metal Ravne, the local community of Ravne na Koro\\vskem and the public research Institut Jožef Stefan, with its registered office in Slovenia, Petrol Energetika, d.o.o. set up a technical and technological platform of an innovative energy case for a transition of steel industry into circular economy with a complete energy solution called »Utilization of Waste Heat from Metallurgical Processes for District Heating of Ravne na Koro\\vskem. This is the first such project designed for a useful utilization of waste heat in steel industry which uses modern technology and innovative system solutions for an integration of a smart, efficient and sustainable heating and cooling system and which shows a growth potential. This will allow the industry and cities to make energy savings, to improve the quality of air and to increase the benefits for the society we live in. On the basis of circular economy, we designed a target-oriented co-operation of economy, local community and public research institute to produce new business models where end consumers are put into the centre. This innovation opens the door for steel industry and local community to a joint aim that is a transition into efficient low-carbon energy systems which are based on involvement of natural local conditions, renewable energy sources, the use of waste heat and with respect for the principles of sustainable development.

Assisted reproductive technology in the United States: 2001 results generated from the American Society for Reproductive Medicine/Society for Assisted Reproductive Technology registry.

Science.gov (United States)

2007-06-01

To summarize the procedures and outcomes of assisted reproductive technologies (ART) that were initiated in the United States in 2001. Data were collected electronically using the Society for Assisted Reproductive Technology (SART) Clinic Outcome Reporting System software and submitted to the American Society for Reproductive Medicine/SART Registry. Three hundred eighty-five clinics submitted data on procedures performed in 2001. Data were collated after November 2002 [corrected] so that the outcomes of all pregnancies would be known. Incidence of clinical pregnancy, ectopic pregnancy, abortion, stillbirth, and delivery. Programs reported initiating 108,130 cycles of ART treatment. Of these, 79,042 cycles involved IVF (with and without micromanipulation), with a delivery rate per retrieval of 31.6%; 340 were cycles of gamete intrafallopian transfer, with a delivery rate per retrieval of 21.9%; 661 were cycles of zygote intrafallopian transfer, with a delivery rate per retrieval of 31.0%. The following additional ART procedures were also initiated: 8,147 fresh donor oocyte cycles, with a delivery rate per transfer of 47.3%; 14,509 frozen ET procedures, with a delivery rate per transfer of 23.5%; 3,187 frozen ETs employing donated oocytes or embryos, with a delivery rate per transfer of 27.4%; and 1,366 cycles using a host uterus, with a delivery rate per transfer of 38.7%. In addition, 112 cycles were reported as combinations of more than one treatment type, 8 cycles as research, and 85 as embryo banking. As a result of all procedures, 29,585 deliveries were reported, resulting in 41,168 neonates. In 2001, there were more programs reporting ART treatment and a significant increase in reported cycles compared with 2000.

Partnerships in Health Promotion for Black Americans. Proceedings of the Annual Meeting of the National Society of Allied Health (Virginia Beach, VA, March 29-30, 1985).

Science.gov (United States)

Douglas, Harry E., III, Comp.

This conference report of the National Society of Allied Health focusses on the theme of health promotion for black Americans, with emphasis on creating cooperative partnerships to address the various social and environmental conditions adversely affecting minority group health status. The keynote speaker provided an historical perspective on…

Fast determination of impurities in metallurgical grade silicon for photovoltaics by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Hampel, J.; Boldt, F.M.; Gerstenberg, H.; Hampel, G.; Kratz, J.V.; Reber, S.; Wiehl, N.

2011-01-01

Standard wafer solar cells are made of near-semiconductor quality silicon. This high quality material makes up a significant part of the total costs of a solar module. Therefore, new concepts with less expensive so called solar grade silicon directly based on physiochemically upgraded metallurgical grade silicon are investigated. Metallurgical grade silicon contains large amounts of impurities, mainly transition metals like Fe, Cr, Mn, and Co, which degrade the minority carrier lifetime and thus the solar cell efficiency. A major reduction of the transition metal content occurs during the unidirectional crystallization due to the low segregation coefficient between the solid and liquid phase. A further reduction of the impurity level has to be done by gettering procedures applied to the silicon wafers. The efficiency of such cleaning procedures of metallurgical grade silicon is studied by instrumental neutron activation analysis (INAA). Small sized silicon wafers of approximately 200 mg with and without gettering step were analyzed. To accelerate the detection of transition metals in a crystallized silicon ingot, experiments of scanning whole vertical silicon columns with a diameter of approximately 1 cm by gamma spectroscopy were carried out. It was demonstrated that impurity profiles can be obtained in a comparably short time. Relatively constant transition metal ratios were found throughout an entire silicon ingot. This led to the conclusion that the determination of several metal profiles might be possible by the detection of only one 'leading element'. As the determination of Mn in silicon can be done quite fast compared to elements like Fe, Cr, and Co, it could be used as a rough marker for the overall metal concentration level. Thus, a fast way to determine impurities in photovoltaic silicon material is demonstrated. - Highlights: → We demonstrate a fast way to determine impurities in photovoltaic silicon by NAA. → We make first experiments of locally

American Society of Clinical Oncology guidance statement: the cost of cancer care.

Science.gov (United States)

Meropol, Neal J; Schrag, Deborah; Smith, Thomas J; Mulvey, Therese M; Langdon, Robert M; Blum, Diane; Ubel, Peter A; Schnipper, Lowell E

2009-08-10

Advances in early detection, prevention, and treatment have resulted in consistently falling cancer death rates in the United States. In parallel with these advances have come significant increases in the cost of cancer care. It is well established that the cost of health care (including cancer care) in the United States is growing more rapidly than the overall economy. In part, this is a result of the prices and rapid uptake of new agents and other technologies, including advances in imaging and therapeutic radiology. Conventional understanding suggests that high prices may reflect the costs and risks associated with the development, production, and marketing of new drugs and technologies, many of which are valued highly by physicians, patients, and payers. The increasing cost of cancer care impacts many stakeholders who play a role in a complex health care system. Our patients are the most vulnerable because they often experience uneven insurance coverage, leading to financial strain or even ruin. Other key groups include pharmaceutical manufacturers that pass along research, development, and marketing costs to the consumer; providers of cancer care who dispense increasingly expensive drugs and technologies; and the insurance industry, which ultimately passes costs to consumers. Increasingly, the economic burden of health care in general, and high-quality cancer care in particular, will be less and less affordable for an increasing number of Americans unless steps are taken to curb current trends. The American Society of Clinical Oncology (ASCO) is committed to improving cancer prevention, diagnosis, and treatment and eliminating disparities in cancer care through support of evidence-based and cost-effective practices. To address this goal, ASCO established a Cost of Care Task Force, which has developed this Guidance Statement on the Cost of Cancer Care. This Guidance Statement provides a concise overview of the economic issues facing stakeholders in the cancer

Metallurgical characterization of M-Wire nickel-titanium shape memory alloy used for endodontic rotary instruments during low-cycle fatigue.

Science.gov (United States)

Ye, Jia; Gao, Yong

2012-01-01

Rotary instruments made of a new nickel-titanium (NiTi) alloy (M-Wire) have shown improved cyclic fatigue resistance and mechanical properties compared with those made of conventional superelastic NiTi wires. The objective of this study was to characterize microstructural changes of M-Wire throughout the cyclic fatigue process under controlled strain amplitude. The average fatigue life was calculated from 30 M-Wire samples that were subjected to a strain-controlled (≈ 4%) rotating bend fatigue test at room temperature and rotational speed of 300 rpm. Microstructural evolution of M-Wire has been investigated by different metallurgical characterization techniques, including differential scanning calorimetry, Vickers microhardness, and transmission electron microscopy at 4 different stages (as-received state, 30%, 60%, and 90% of average fatigue life). During rotating bend fatigue test, no statistically significant difference (P > .05) was found on austenite finish temperatures between as-received M-Wire and fatigued samples. However, significant differences (P Wire are expected to have higher strength and wear resistance than similar instruments made of conventional superelastic NiTi wires because of its unique nano-crystalline martensitic microstructure. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The American Society of Colon and Rectal Surgeons Clinical Practice Guidelines for the Treatment of Colon Cancer.

Science.gov (United States)

Vogel, Jon D; Eskicioglu, Cagla; Weiser, Martin R; Feingold, Daniel L; Steele, Scott R

2017-10-01

The American Society of Colon and Rectal Surgeons is dedicated to ensuring high-quality patient care by advancing the science, prevention, and management of disorders and diseases of the colon, rectum, and anus. The Clinical Practice Guidelines Committee is composed of society members who are chosen because they have demonstrated expertise in the specialty of colon and rectal surgery. This committee was created to lead international efforts in defining quality care for conditions related to the colon, rectum, and anus. This is accompanied by developing Clinical Practice Guidelines based on the best available evidence. These guidelines are inclusive and not prescriptive. Their purpose is to provide information on which decisions can be made, rather than to dictate a specific form of treatment. These guidelines are intended for the use of all practitioners, health care workers, and patients who desire information about the management of the conditions addressed by the topics covered in these guidelines. It should be recognized that these guidelines should not be deemed inclusive of all proper methods of care or exclusive of methods of care reasonably directed to obtaining the same results. The ultimate judgment regarding the propriety of any specific procedure must be made by the physician in light of all the circumstances presented by the individual patient.

Residual life assessment of French PWR vessel head penetrations through metallurgical analysis

International Nuclear Information System (INIS)

Pichon, C.; Boudot, R.; Benhamou, C.; Gelpi, A.

1994-01-01

In September 1991, a vessel head penetration was found leaking at Bugey 3 plant during the hydrotest included in the framework of decennial In Service Inspections. Non destructive examinations performed afterwards on several other plants have shown some cracked penetrations. Destructive expertise confirmed quickly that again this new problem is related to stress corrosion cracking of Alloy 600 used as base material. During the last 15 years, similar cracking have been met in steam generator tubes and secondly in pressurizer instrumentation tubes. In spite of all the work performed since that time an extension appears to be necessary for explaining the features of this new event; however material sensitivity, stress and temperature still remain the key parameters governing the behavior of Alloy 600 in PWR environment. In this paper, only the material sensitivity of vessel head penetrations is examined through metallurgical analysis in relation with SCC tests. On the basis of vessel head field experience in combination with thermomechanical process used for fabrication of original bars criteria for a sensitivity ranking of penetrations are proposed. Metallurgical investigations and SCC tests were carried out to support this sensitivity ranking. The final aim is to use such information among those quoted above for assessment of vessel heads residual life. This document is an overview of the work performed in France concerning the material sensitivity of forged Alloy 600. It represents an important part of the assessments and investigations undertaken in France on the stress corrosion cracking phenomenon affecting the reactor vessel head penetrations in PWR's

Recommended Amount of Sleep for a Healthy Adult: A Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society

OpenAIRE

Watson, Nathaniel F.; Badr, M. Safwan; Belenky, Gregory; Bliwise, Donald L.; Buxton, Orfeu M.; Buysse, Daniel; Dinges, David F.; Gangwisch, James; Grandner, Michael A.; Kushida, Clete; Malhotra, Raman K.; Martin, Jennifer L.; Patel, Sanjay R.; Quan, Stuart F.; Tasali, Esra

2015-01-01

Sleep is essential for optimal health. The American Academy of Sleep Medicine (AASM) and Sleep Research Society (SRS) developed a consensus recommendation for the amount of sleep needed to promote optimal health in adults, using a modified RAND Appropriateness Method process. The recommendation is summarized here. A manuscript detailing the conference proceedings and evidence supporting the final recommendation statement will be published in SLEEP and the Journal of Clinical Sleep Medicine.

The American brachytherapy society survey of brachytherapy practice for carcinoma of the cervix in the United States.

Science.gov (United States)

Nag, S; Orton, C; Young, D; Erickson, B

1999-04-01

The purpose of this study was to survey the brachytherapy practice for cervical cancer in the United States. The Clinical Research Committee of the American Brachytherapy Society (ABS) performed a retrospective survey of individual physicians of the ABS and American Society of Therapeutic Radiologists and Oncologists regarding the details of the brachytherapy techniques they personally used in the treatment of cervical cancer patients for the year 1995. The replies (some of which may have been an estimate only) were tabulated. The scope of this survey did not allow us to verify the data by chart audits. A total of about 3500 questionnaires were mailed out; 521 responses were received. Of these responders, 206 (40%) did not perform any brachytherapy for carcinoma of the cervix in 1995. Of the other 315 responders reporting a total of 4892 patients treated in 1995, 88% used low dose rate (LDR) while 24% used high dose rate (HDR). There was a wide variation in the doses used. For LDR treatments, the median total external beam radiation therapy (EBRT) dose was 45 and 50 Gy and the LDR dose was 42 and 45 Gy for early and advanced cancers, respectively. For HDR treatments, the median EBRT dose was 48 and 50 Gy and the median HDR dose was 29 and 30 Gy for early and advanced cancers, respectively. The median dose per fraction was 6 Gy for a median of five fractions. Interstitial brachytherapy was used as a component of the treatment in 6% of the patients by 21% of responders. Very few responders treated with pulsed or medium dose rates. This retrospective survey showed the current brachytherapy practice pattern in the treatment of cervical cancer in the United States and can serve as a basis for future prospective national brachytherapy data registry. There was wide variation in the practice pattern, emphasizing the urgent need for consensus on these issues. Copyright 1999 Academic Press.

Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society on the Recommended Amount of Sleep for a Healthy Adult: Methodology and Discussion.

Science.gov (United States)

Watson, Nathaniel F; Badr, M Safwan; Belenky, Gregory; Bliwise, Donald L; Buxton, Orfeu M; Buysse, Daniel; Dinges, David F; Gangwisch, James; Grandner, Michael A; Kushida, Clete; Malhotra, Raman K; Martin, Jennifer L; Patel, Sanjay R; Quan, Stuart F; Tasali, Esra

2015-08-01

The American Academy of Sleep Medicine and Sleep Research Society recently released a Consensus Statement regarding the recommended amount of sleep to promote optimal health in adults. This paper describes the methodology, background literature, voting process, and voting results for the consensus statement. In addition, we address important assumptions and challenges encountered during the consensus process. Finally, we outline future directions that will advance our understanding of sleep need and place sleep duration in the broader context of sleep health. © 2015 Associated Professional Sleep Societies, LLC.

Science and Society Colloquium

CERN Multimedia

Randi, J

1991-01-01

Mr. Randi will give an update of his lecture to the American Physical Society on the occasion of his award of the 1989 Forum Prize. The citation said: "for his unique defense of Science and the scientific method in many disciplines, including physics, against pseudoscience, frauds and charlatans. His use of scientific techniques has contributed to refuting suspicious and fraudulent claims of paranormal results. He has contributed significantly to public understanding of important issues where science and society interact". He is a professional magician and author of many books. He worked with John Maddox, the Editor of Nature to investigate the claims of "water with memory".

Computational benchmark problems: a review of recent work within the American Nuclear Society Mathematics and Computation Division

International Nuclear Information System (INIS)

Dodds, H.L. Jr.

1977-01-01

An overview of the recent accomplishments of the Computational Benchmark Problems Committee of the American Nuclear Society Mathematics and Computation Division is presented. Solutions of computational benchmark problems in the following eight areas are presented and discussed: (a) high-temperature gas-cooled reactor neutronics, (b) pressurized water reactor (PWR) thermal hydraulics, (c) PWR neutronics, (d) neutron transport in a cylindrical ''black'' rod, (e) neutron transport in a boiling water reactor (BWR) rod bundle, (f) BWR transient neutronics with thermal feedback, (g) neutron depletion in a heavy water reactor, and (h) heavy water reactor transient neutronics. It is concluded that these problems and solutions are of considerable value to the nuclear industry because they have been and will continue to be useful in the development, evaluation, and verification of computer codes and numerical-solution methods

3-D Modelling of Electromagnetic, Thermal, Mechanical and Metallurgical Couplings in Metal Forming Processes

International Nuclear Information System (INIS)

Chenot, Jean-Loup; Bay, Francois

2007-01-01

The different stages of metal forming processes often involve - beyond the mechanical deformations processes - other physical coupled problems, such as heat transfer, electromagnetism or metallurgy. The purpose of this paper is to focus on problems involving electromagnetic couplings. After a brief recall on electromagnetic modeling, we shall then focus on induction heating processes and present some results regarding heat transfer, as well as mechanical couplings. A case showing coupling for metallurgic microstructure evolution will conclude this paper

1997 NASA-ODU American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program

Science.gov (United States)

Tiwari, Surendra N. (Compiler); Young, Deborah B. (Compiler)

1998-01-01

Since 1964, the National Aeronautics and Space Administration (NASA) has supported a program of summer faculty fellowships for engineering and science educators. In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spend 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society for Engineering Education supervises the programs. Objectives of the program are as follows: (1) To further the professional knowledge of qualified engineering and science faculty members, (2) To stimulate and exchange ideas between participants and NASA; (3) To enrich and refresh the research and teaching activities of participants' institutions; and (4) To contribute to the research objectives of the NASA center. Program description is as follows: College or university faculty members will be appointed as Research Fellows to spend 10 weeks in cooperative research and study at the NASA Langley Research Center. The Fellow will devote approximately 90 percent of the time to a research problem and the remaining time to a study program. The study program will consist of lectures and seminars on topics of interest or that are directly relevant to the Fellows' research topics. The lectures and seminar leaders will be distinguished scientists and engineers from NASA, education, and industry.

Readability of patient education materials on the American Orthopaedic Society for Sports Medicine website.

Science.gov (United States)

Eltorai, Adam E M; Han, Alex; Truntzer, Jeremy; Daniels, Alan H

2014-11-01

The recommended readability of patient education materials by the American Medical Association (AMA) and National Institutes of Health (NIH) should be no greater than a sixth-grade reading level. However, online resources may be too complex for some patients to understand, and poor health literacy predicts inferior health-related quality of life outcomes. This study evaluated whether the American Orthopaedic Society for Sports Medicine (AOSSM) website's patient education materials meet recommended readability guidelines for medical information. We hypothesized that the readability of these online materials would have a Flesch-Kincaid formula grade above the sixth grade. All 65 patient education entries of the AOSSM website were analyzed for grade level readability using the Flesch-Kincaid formula, a widely used and validated tool to evaluate the text reading level. The average (standard deviation) readability of all 65 articles was grade level 10.03 (1.44); 64 articles had a readability score above the sixth-grade level, which is the maximum level recommended by the AMA and NIH. Mean readability of the articles exceeded this level by 4.03 grade levels (95% CI, 3.7-4.4; P reading level of US adults. Mean readability of the articles exceeded this level by 2.03 grade levels (95% CI, 1.7-2.4; P online AOSSM patient education materials exceeds the readability level recommended by the AMA and NIH, and is above the average reading level of the majority of US adults. This online information may be of limited utility to most patients due to a lack of comprehension. Our study provides a clear example of the need to improve the readability of specific education material in order to maximize the efficacy of multimedia sources.

The American Society for Radiation Oncology's 2015 Core Physics Curriculum for Radiation Oncology Residents

International Nuclear Information System (INIS)

Burmeister, Jay; Chen, Zhe; Chetty, Indrin J.; Dieterich, Sonja; Doemer, Anthony; Dominello, Michael M.; Howell, Rebecca M.; McDermott, Patrick; Nalichowski, Adrian; Prisciandaro, Joann; Ritter, Tim; Smith, Chadd; Schreiber, Eric; Shafman, Timothy; Sutlief, Steven; Xiao, Ying

2016-01-01

Purpose: The American Society for Radiation Oncology (ASTRO) Physics Core Curriculum Subcommittee (PCCSC) has updated the recommended physics curriculum for radiation oncology resident education to improve consistency in teaching, intensity, and subject matter. Methods and Materials: The ASTRO PCCSC is composed of physicists and physicians involved in radiation oncology residency education. The PCCSC updated existing sections within the curriculum, created new sections, and attempted to provide additional clinical context to the curricular material through creation of practical clinical experiences. Finally, we reviewed the American Board of Radiology (ABR) blueprint of examination topics for correlation with this curriculum. Results: The new curriculum represents 56 hours of resident physics didactic education, including a 4-hour initial orientation. The committee recommends completion of this curriculum at least twice to assure both timely presentation of material and re-emphasis after clinical experience. In addition, practical clinical physics and treatment planning modules were created as a supplement to the didactic training. Major changes to the curriculum include addition of Fundamental Physics, Stereotactic Radiosurgery/Stereotactic Body Radiation Therapy, and Safety and Incidents sections, and elimination of the Radiopharmaceutical Physics and Dosimetry and Hyperthermia sections. Simulation and Treatment Verification and optional Research and Development in Radiation Oncology sections were also added. A feedback loop was established with the ABR to help assure that the physics component of the ABR radiation oncology initial certification examination remains consistent with this curriculum. Conclusions: The ASTRO physics core curriculum for radiation oncology residents has been updated in an effort to identify the most important physics topics for preparing residents for careers in radiation oncology, to reflect changes in technology and practice since

Occupational exposure in South African metallurgical plants and industries involving naturally occurring radionuclides

International Nuclear Information System (INIS)

Kruger, I.D.

2002-01-01

South Africa has a very large mining and minerals processing industry exploiting a variety of ores and minerals containing elevated levels of NORM. The industry employs more than 300,000 persons. Doses have been assessed to workers in the mining industry in South Africa. In the gold mining industry radon measurements have been performed since the early 1970s. Regulations have been in force since 1990. The mean annual dose to underground gold mine workers, mostly from radon progeny, is about 5 mSv with maximum doses exceeding 20 mSv. The maximum annual dose to surface workers in gold mines is 5 mSv. In South African coal mines the mean annual dose from inhalation of radon decay products has been estimated from limited radon concentration measurements to be about 0.6 mSv. In the phosphoric acid and fertilizer production industry the doses to the workers do not exceed 6 mSv/y. There are 3 mineral sands operations in South Africa, for which the maximum annual dose to workers is 3 mSv. One open pit copper mine contains elevated levels of U, which is extracted as a by-product. The maximum annual doses to workers are 5 mSv for workers in the mine and 20 mSv for workers in the metallurgical plant. Worker doses in the metallurgical plant have since been reduced with the introduction of radiation protection measures

Study of ecologo-biological reactions of common flax to finely dispersed metallurgical wastes

Science.gov (United States)

Zakharova, O.; Gusev, A.; Skripnikova, E.; Skripnikova, M.; Krutyakov, Yu; Kudrinsky, A.; Mikhailov, I.; Senatova, S.; Chuprunov, C.; Kuznetsov, D.

2015-11-01

Study was carried out on the influence of metallurgic industrial sludge on morphometric and biochemical indicators as well as productivity of common flax under laboratory and field conditions. In laboratory settings negative influence on seed germinating ability and positive influence on sprouts biomass production in water medium were observed. In sand medium suppression of biological productivity under the influence of sludge together with photosynthetic system II (FS II) activity stimulation were registered. Biochemical study showed peroxidase activity decrease in laboratory, while activity of polyphenol oxidase, superoxide dismutase and catalase were given a mild boost under the influence of sludge. In the field trial, positive influence of sludge on flax photosynthetic apparatus was shown. Positive influence of sludge on vegetation and yield indicators was observed. The analysis of heavy metals content showed excess over maximum allowable concentration (MAC) of copper and zinc in control plants, it may point to the background soil pollution. In the plants from the trial groups receiving 0.5 and 2 ton/ha heavy metals content below the control values was registered. Application of 4 ton/ha led to the maximum content of copper and zinc in the plants among the trial groups. The analysis of soils from the test plots indicated no excess over maximum allowable concentrations of heavy metals. Thus, further study of possibilities of using metallurgic industrial sludge as a soil stimulator in flax cultivation at the application rate of 0.5 t/ha seems promising.

Attitudes toward Family Obligations among American Adolescents with Asian, Latin American, and European Backgrounds.

Science.gov (United States)

Fuligni, Andrew J.; Tseng, Vivian; Lam, May

1999-01-01

Examined attitudes toward family obligations in American tenth and twelfth graders from Filipino, Chinese, Mexican, Central and South American, and European backgrounds. Found that even within a society emphasizing adolescent autonomy and independence, youths from families with collectivistic traditions retain their parents' familial values and…

Application of Six Sigma Using DMAIC Methodology in the Process of Product Quality Control in Metallurgical Operation

Directory of Open Access Journals (Sweden)

Girmanová Lenka

2017-12-01

Full Text Available The Six Sigma DMAIC can be considered a guide for problem solving and product or process improvement. The majority of companies start to implement Six Sigma using the DMAIC methodology. The paper deals with application of Six Sigma using the DMAIC methodology in the process of product quality control. The case study is oriented on the field of metallurgical operations. The goal of the Six Sigma project was to ensure the required metallurgic product quality and to avoid an increase in internal costs associated with poor product quality. In this case study, a variety of tools and techniques like flow chart, histogram, Pareto diagram, analysis of FMEA (Failure Mode and Effect Analysis data, cause and effect diagram, logical analysis was used. The Sigma level has improved by approximately 13%. The achieved improvements have helped to reduce the quantity of defective products and the processing costs (technology for re-adjusting. Benefits resulting from the DMAIC implementation can be divided into three levels: the qualitative, economic and safety level.

Numerical computation of fluid flow in different nonferrous metallurgical reactors

International Nuclear Information System (INIS)

Lackner, A.

1996-10-01

Heat, mass and fluid flow phenomena in metallurgical reactor systems such as smelting cyclones or electrolytic cells are complex and intricately linked through the governing equations of fluid flow, chemical reaction kinetics and chemical thermodynamics. The challenges for the representation of flow phenomena in such reactors as well as the transfers of these concepts to non-specialist modelers (e.g. plant operators and management personnel) can be met through scientific flow visualization techniques. In the first example the fluid flow of the gas phase and of concentrate particles in a smelting cyclone for copper production are calculated three dimensionally. The effect of design parameters (length and diameter of reactor, concentrate feeding tangentially or from the top, ..) and operating conditions are investigated. Single particle traces show, how to increase particle retention time before the particles reach the liquid film flowing down the cyclone wall. Cyclone separators are widely used in the metallurgical and chemical industry for collection of large quantities of dust. Most of the empirical models, which today are applied for the design, are lacking in being valid in the high temperature region. Therefore the numerical prediction of the collection efficiency of dust particles is done. The particle behavior close to the wall is considered by applying a particle restitution model, which calculates individual particle restitution coefficients as functions of impact velocity and impact angle. The effect of design parameters and operating are studied. Moreover, the fluid flow inside a copper refining electrolysis cell is modeled. The simulation is based on density variations in the boundary layer at the electrode surface. Density and thickness of the boundary layer are compared to measurements in a parametric study. The actual inhibitor concentration in the cell is calculated, too. Moreover, a two-phase flow approach is developed to simulate the behavior of

Determining sulfur in metallurgical coke by the X-ray fluorescent method

Energy Technology Data Exchange (ETDEWEB)

Sofilic, T.; Kesic-Racan, M.; Sindler, M.; Sokolean, D.

1979-01-01

A method is described of X-ray fluorescent analysis for current determination of sulfur in the concentration range of 0.5-1.16% in metallurgical coke. To do this, the analyzed material (coke) is ground to a particle size of 200 mu and mixed in a 1:1 ratio with an organic binder (soluble starch). The mixture is briquetted in meshes of a certain size under a pressure of 25 tons/cm/sub 2/. The tablets obtained are analyzed in a Phillips spectrometer with a Cr anticathode. The presence is noted of a linear dependence between the S content and the instrument reading; the correlation factor is 0.91; the mean detection error, 0.0596.

Utilizing of the metallurgical slag for production of cementless concrete mixtures

Directory of Open Access Journals (Sweden)

D. Baricová

2012-10-01

Full Text Available In process of pig iron, steel and cast iron production besides main product, also secondary products are formed, that have character of secondary raw materials and industrial wastes. The most abundant secondary product originating in the metallurgical process is furnace slag. Total amount of accured slag, also its chemical, mineralogical, physical – chemical properties and similarity with natural stones predestinate its utilisation in different fields of industry. The contribution deals with production of cementless concrete mixtures, where the main parts were formed by blast furnace granulated slag grinded and different gravel slag from blast furnace, oxygen converter and electric arc furnace. As activators of solidification different kinds of water glass were tested.

THE GODFATHER AND THE AMERICAN DREAM

Directory of Open Access Journals (Sweden)

Goksu Gigi Akkan

2017-01-01

Full Text Available This paper tries to demonstrate how The Godfather by Francis Ford Coppola challenges the myth of the American Dream. The thesis of the paper is that The Godfather is not a film seeking to re-establish American norms and ideals, but that it tries to break down and shed light on the corrupt side of the modern American society through the myth of “the American Dream”. The structure of the paper is so that first, what other academics and critiques have to say about Coppola’s attempt to criticize the American society and ideals will be visited, as this will give the reader a clearer understanding of the film’s meaning and message. Then, analyses of how certain characters are built and how their presence and attributes contribute to the film’s meaning will be conducted, topped off with the usage of props.

The 2012 Hormone Therapy Position Statement of The North American Menopause Society

Science.gov (United States)

2012-01-01

Objective This position statement aimed to update the evidence-based position statement published by The North American Menopause Society (NAMS) in 2010 regarding recommendations for hormone therapy (HT) for postmenopausal women. This updated position statement further distinguishes the emerging differences in the therapeutic benefit-risk ratio between estrogen therapy (ET) and combined estrogen-progestogen therapy (EPT) at various ages and time intervals since menopause onset. Methods An Advisory Panel of expert clinicians and researchers in the field of women’s health was enlisted to review the 2010 NAMS position statement, evaluate new evidence, and reach consensus on recommendations. The Panel’s recommendations were reviewed and approved by the NAMS Board of Trustees as an official NAMS position statement. Results Current evidence supports the use of HT for perimenopausal and postmenopausal women when the balance of potential benefits and risks is favorable for the individual woman. This position statement reviews the effects of ET and EPT on many aspects of women’s health and recognizes the greater safety profile associated with ET. Conclusions Recent data support the initiation of HT around the time of menopause to treat menopause-related symptoms and to prevent osteoporosis in women at high risk of fracture. The more favorable benefit-risk ratio for ET allows more flexibility in extending the duration of use compared with EPT, where the earlier appearance of increased breast cancer risk precludes a recommendation for use beyond 3 to 5 years. PMID:22367731

Shared Decision Making in Intensive Care Units: An American College of Critical Care Medicine and American Thoracic Society Policy Statement

Science.gov (United States)

Kon, Alexander A.; Davidson, Judy E.; Morrison, Wynne; Danis, Marion; White, Douglas B.

2015-01-01

Objectives Shared decision-making (SDM) is endorsed by critical care organizations, however there remains confusion about what SDM is, when it should be used, and approaches to promote partnerships in treatment decisions. The purpose of this statement is to define SDM, recommend when SDM should be used, identify the range of ethically acceptable decision-making models, and present important communication skills. Methods The American College of Critical Care Medicine (ACCM) and American Thoracic Society (ATS) Ethics Committees reviewed empirical research and normative analyses published in peer-reviewed journals to generate recommendations. Recommendations approved by consensus of the full Ethics Committees of ACCM and ATS were included in the statement. Main Results Six recommendations were endorsed: 1) Definition: Shared decision-making is a collaborative process that allows patients, or their surrogates, and clinicians to make health care decisions together, taking into account the best scientific evidence available, as well as the patient’s values, goals, and preferences. 2) Clinicians should engage in a SDM process to define overall goals of care (including decisions regarding limiting or withdrawing life-prolonging interventions) and when making major treatment decisions that may be affected by personal values, goals, and preferences. 3) Clinicians should use as their “default” approach a SDM process that includes three main elements: information exchange, deliberation, and making a treatment decision. 4) A wide range of decision-making approaches are ethically supportable including patient- or surrogate-directed and clinician-directed models. Clinicians should tailor the decision-making process based on the preferences of the patient or surrogate. 5) Clinicians should be trained in communication skills. 6) Research is needed to evaluate decision-making strategies. Conclusions Patient and surrogate preferences for decision-making roles regarding value

Integrated Multimotor Electrical DC Drive for Metallurgical Rolling Table

Directory of Open Access Journals (Sweden)

Gała Marek

2015-06-01

Full Text Available A drive system of a section of a metallurgical rolling table consisting of six dc motors, 2220 amperes of total current, fed from a single ABB reversible thyristor converter has been described in this paper. Autonomous excitation circuits of the motors are fed from independent thyristor converters working in the so called MULTIFEX system linked with a supervisory high power converter. There are presented schemes of the DSL communication realized by FEX excitation cards of the motors using the SDSC card of the DCS-800-S02 converter and logic control system based on a PLC controller. The parameterization of the DCS-800 converter and the DCF 803 excitation systems was conducted using the DriveWindow software tool. Significant waveforms of voltages, currents and the estimated motor velocity are described and presented for the idle run as well as during transporting sheets discharged from a pusher furnace.

The Power of Women in Three American Indian Societies.

Science.gov (United States)

Kidwell, Clara Sue

1978-01-01

The persistence of the Indian woman's biological function and role in the society has provided a sense of security and stability in the changing Indian world, and their flexibility in adapting to other roles has been a survival factor in processes of acculturation. (Author/EB)

American Thoracic Society and National Heart, Lung, and Blood Institute Implementation Research Workshop Report.

Science.gov (United States)

Bender, Bruce G; Krishnan, Jerry A; Chambers, David A; Cloutier, Michelle M; Riekert, Kristin A; Rand, Cynthia S; Schatz, Michael; Thomson, Carey C; Wilson, Sandra R; Apter, Andrea; Carson, Shannon S; George, Maureen; Gerald, Joe K; Gerald, Lynn; Goss, Christopher H; Okelo, Sande O; Mularski, Richard A; Nguyen, Huong Q; Patel, Minal R; Szefler, Stanley J; Weiss, Curtis H; Wilson, Kevin C; Freemer, Michelle

2015-12-01

To advance implementation research (IR) in respiratory, sleep, and critical care medicine, the American Thoracic Society and the Division of Lung Diseases from the NHLBI cosponsored an Implementation Research Workshop on May 17, 2014. The goals of IR are to understand the barriers and facilitators of integrating new evidence into healthcare practices and to develop and test strategies that systematically target these factors to accelerate the adoption of evidence-based care. Throughout the workshop, presenters provided examples of IR that focused on the rate of adoption of evidence-based practices, the feasibility and acceptability of interventions to patients and other stakeholders who make healthcare decisions, the fidelity with which practitioners use specific interventions, the effects of specific barriers on the sustainability of an intervention, and the implications of their research to inform policies to improve patients' access to high-quality care. During the discussions that ensued, investigators' experience led to recommendations underscoring the importance of identifying and involving key stakeholders throughout the research process, ensuring that those who serve as reviewers understand the tenets of IR, managing staff motivation and turnover, and tackling the challenges of scaling up interventions across multiple settings.

Interests diffusion on a semantic multiplex. Comparing Computer Science and American Physical Society communities

Science.gov (United States)

D'Agostino, Gregorio; De Nicola, Antonio

2016-10-01

Exploiting the information about members of a Social Network (SN) represents one of the most attractive and dwelling subjects for both academic and applied scientists. The community of Complexity Science and especially those researchers working on multiplex social systems are devoting increasing efforts to outline general laws, models, and theories, to the purpose of predicting emergent phenomena in SN's (e.g. success of a product). On the other side the semantic web community aims at engineering a new generation of advanced services tailored to specific people needs. This implies defining constructs, models and methods for handling the semantic layer of SNs. We combined models and techniques from both the former fields to provide a hybrid approach to understand a basic (yet complex) phenomenon: the propagation of individual interests along the social networks. Since information may move along different social networks, one should take into account a multiplex structure. Therefore we introduced the notion of "Semantic Multiplex". In this paper we analyse two different semantic social networks represented by authors publishing in the Computer Science and those in the American Physical Society Journals. The comparison allows to outline common and specific features.

An official American thoracic society workshop report: developing performance measures from clinical practice guidelines.

Science.gov (United States)

Kahn, Jeremy M; Gould, Michael K; Krishnan, Jerry A; Wilson, Kevin C; Au, David H; Cooke, Colin R; Douglas, Ivor S; Feemster, Laura C; Mularski, Richard A; Slatore, Christopher G; Wiener, Renda Soylemez

2014-05-01

Many health care performance measures are either not based on high-quality clinical evidence or not tightly linked to patient-centered outcomes, limiting their usefulness in quality improvement. In this report we summarize the proceedings of an American Thoracic Society workshop convened to address this problem by reviewing current approaches to performance measure development and creating a framework for developing high-quality performance measures by basing them directly on recommendations from well-constructed clinical practice guidelines. Workshop participants concluded that ideally performance measures addressing care processes should be linked to clinical practice guidelines that explicitly rate the quality of evidence and the strength of recommendations, such as the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) process. Under this framework, process-based performance measures would only be developed from strong recommendations based on high- or moderate-quality evidence. This approach would help ensure that clinical processes specified in performance measures are both of clear benefit to patients and supported by strong evidence. Although this approach may result in fewer performance measures, it would substantially increase the likelihood that quality-improvement programs based on these measures actually improve patient care.

Silver recovery from zinc metallurgical sludge – analysis of solutions

Directory of Open Access Journals (Sweden)

Pietrzyk Stanisław

2017-01-01

Full Text Available During the hydrometallurgical process of zinc production, conducted in the ZGH “Bolesław” S.A. in Bukowno [Mine and Metallurgical Plant], about 40,000 tons of sludge is generated. After dehydration in the Larox filter presses, sludge contains ca. 16-18% of Zn, 20-25% of Fe, and 200-300 ppm of Ag. Next, sludge is transported to the Olkusz concentrator for flotation to obtain concentrate enriched with Ag (1,000-1,500 ppm. The concentrate is then sent to the HC “Miasteczko Śląskie” [zinc smelter], while the flotation tailings are subjected to recycling in waelz kiln in Bukowno to regain mainly Zn and Pb, in the form of oxides (also sent later to the HC “Miasteczko Śląskie”.

Ti₃SiC₂ Synthesis by Powder Metallurgical Methods

OpenAIRE

Kero, Ida; Antti, Marta-Lena; Odén, Magnus

2007-01-01

Titanium silicon carbide MAX phase was synthesised by a powder metallurgical method from ball milled TiC/Si powders of two different compositions, with TiC/Si ratios of 3:2 and 3:2.2 respectively. The cold pressed samples were analysed by dilatometry under flowing argon or sintered under vacuum for different times. The sintered samples were evaluated using x-ray diffraction (XRD). This study showed that titanium carbide was always present as a secondary phase and silicon carbide accompanied t...

The ACTTION-American Pain Society Pain Taxonomy (AAPT): an evidence-based and multidimensional approach to classifying chronic pain conditions.

Science.gov (United States)

Fillingim, Roger B; Bruehl, Stephen; Dworkin, Robert H; Dworkin, Samuel F; Loeser, John D; Turk, Dennis C; Widerstrom-Noga, Eva; Arnold, Lesley; Bennett, Robert; Edwards, Robert R; Freeman, Roy; Gewandter, Jennifer; Hertz, Sharon; Hochberg, Marc; Krane, Elliot; Mantyh, Patrick W; Markman, John; Neogi, Tuhina; Ohrbach, Richard; Paice, Judith A; Porreca, Frank; Rappaport, Bob A; Smith, Shannon M; Smith, Thomas J; Sullivan, Mark D; Verne, G Nicholas; Wasan, Ajay D; Wesselmann, Ursula

2014-03-01

Current approaches to classification of chronic pain conditions suffer from the absence of a systematically implemented and evidence-based taxonomy. Moreover, existing diagnostic approaches typically fail to incorporate available knowledge regarding the biopsychosocial mechanisms contributing to pain conditions. To address these gaps, the Analgesic, Anesthetic, and Addiction Clinical Trial Translations Innovations Opportunities and Networks (ACTTION) public-private partnership with the U.S. Food and Drug Administration and the American Pain Society (APS) have joined together to develop an evidence-based chronic pain classification system called the ACTTION-APS Pain Taxonomy. This paper describes the outcome of an ACTTION-APS consensus meeting, at which experts agreed on a structure for this new taxonomy of chronic pain conditions. Several major issues around which discussion revolved are presented and summarized, and the structure of the taxonomy is presented. ACTTION-APS Pain Taxonomy will include the following dimensions: 1) core diagnostic criteria; 2) common features; 3) common medical comorbidities; 4) neurobiological, psychosocial, and functional consequences; and 5) putative neurobiological and psychosocial mechanisms, risk factors, and protective factors. In coming months, expert working groups will apply this taxonomy to clusters of chronic pain conditions, thereby developing a set of diagnostic criteria that have been consistently and systematically implemented across nearly all common chronic pain conditions. It is anticipated that the availability of this evidence-based and mechanistic approach to pain classification will be of substantial benefit to chronic pain research and treatment. The ACTTION-APS Pain Taxonomy is an evidence-based chronic pain classification system designed to classify chronic pain along the following dimensions: 1) core diagnostic criteria; 2) common features; 3) common medical comorbidities; 4) neurobiological, psychosocial

American Missionary Universities in China and the Middle East and American Philanthropy

DEFF Research Database (Denmark)

Bertelsen, Rasmus Gjedssø

2014-01-01

This article investigates the interacting soft power of two important categories of American transnational actors: American missionary universities in China and the Middle East and American religious, foundation and individual philanthropy. These transnational actors have had and have soft power...... in the host societies. The universities and their philanthropic donors have strengthened US national soft power regarding milieu goals of elite attraction to education, language and liberal norms. However, US national soft power concerning possession goals of acceptance of foreign policies in China...

MEXICAN-AMERICAN STUDY PROJECT. ADVANCE REPORT 9, THE SPANISH AMERICANS OF NEW MEXICO--A DISTINCTIVE HERITAGE.

Science.gov (United States)

GONZALEZ, NANCIE L.

USING NEW MEXICO AS A BASIS TO TRACE THE SPANISH-AMERICAN AND MEXICAN-AMERICAN HERITAGE, THE AUTHOR STATES THAT ANY STIGMA PLACED ON THE LATTER GROUP IS ONE OF CLASS DISTINCTION. THERE IS EVIDENCE THAT ACCULTURATION AND ASSIMILATION OF BOTH GROUPS INTO THE ANGLO-AMERICAN SOCIETY IS PROCEEDING STEADILY, AND THAT THE WORLD WARS AND THE KOREAN…

Reporting of Uncertainty at the 2013 Annual Meeting of the American Society for Radiation Oncology

International Nuclear Information System (INIS)

Lee, W. Robert

2014-01-01

Purpose: The annual meeting of the American Society for Radiation Oncology (ASTRO) is designed to disseminate new scientific findings and technical advances to professionals. Best practices of scientific dissemination require that some level of uncertainty (or imprecision) is provided. Methods and Materials: A total of 279 scientific abstracts were selected for oral presentation in a clinical session at the 2013 ASTRO Annual Meeting. A random sample of these abstracts was reviewed to determine whether a 95% confidence interval (95% CI) or analogous measure of precision was provided for time-to-event analyses. Results: A sample of 140 abstracts was reviewed. Of the 65 abstracts with Kaplan-Meier or cumulative incidence analyses, 6 included some measure of precision (6 of 65 = 9%; 95% CI, 2-16). Of the 43 abstracts reporting ratios for time-to-event analyses (eg, hazard ratio, risk ratio), 22 included some measure of precision (22 of 43 = 51%; 95% CI, 36-66). Conclusions: Measures of precision are not provided in a significant percentage of abstracts selected for oral presentation at the Annual Meeting of ASTRO

The American Geriatrics Society/National Institute on Aging Bedside-to-Bench Conference: Research Agenda on Delirium in Older Adults

Science.gov (United States)

Mikhailovich, Anna

2015-01-01

The American Geriatrics Society, with support from the National Institute on Aging and the John A. Hartford Foundation, held its seventh Bedside-to-Bench research conference, entitled “Delirium in Older Adults: Finding Order in the Disorder” on February 9–11, 2014, to provide participants with opportunities to learn about cutting-edge research developments, draft recommendations for future research involving translational efforts, and opportunities to network with colleagues and leaders in the field. This meeting was the first of three conferences that will address delirium, sleep disorders, and voiding difficulties and urinary incontinence, emphasizing, whenever possible, the relationships and potentially shared clinical and pathophysiological features between these common geriatric syndromes. PMID:25834932

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1987, volume 2

Science.gov (United States)

Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

1987-01-01

The 1987 Johnson Space Center (JCS) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of ASEE. The basic objectives of the program are: to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA; to enrich and refresh the research and teaching activities of participants' institutions; and to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports on the research projects done by the faculty fellows during the summer of 1987.

American Brachytherapy Society recommendations for reporting morbidity after prostate brachytherapy

International Nuclear Information System (INIS)

Nag, Subir; Ellis, Rodney J.; Merrick, Gregory S.; Bahnson, Robert; Wallner, Kent; Stock, Richard

2002-01-01

Purpose: To standardize the reporting of brachytherapy-related prostate morbidity to guide ongoing clinical practice and future investigations. Methods: Members of the American Brachytherapy Society (ABS) with expertise in prostate brachytherapy performed a literature review and, guided by their clinical experience, formulated specific recommendations for reporting on morbidity related to prostate brachytherapy. Results: The ABS recommends using validated, patient-administered health-related quality-of-life instruments for the determination of baseline and follow-up data regarding bowel, urinary, and sexual function. Both actuarial and crude incidences should be reported, along with the temporal resolution of specific complications, and correlated with the doses to the normal tissues. The International Prostate Symptom Score is recommended to assess urinary morbidity, and any dysuria, gross hematuria, urinary retention, incontinence, or medication use should be quantified. Likewise, the ''Sexual Health Inventory for Men,'' which includes the specific erectile questions of the International Index of Erectile Function, is the preferred instrument for reporting sexual function, and the loss of sexual desire, incidence of hematospermia, painful orgasm (orgasmalgia), altered orgasm intensity, decreased ejaculatory volume, use of erectile aids, and use of hormones for androgen deprivation should be quantified. The ABS recommends adoption of the Radiation Therapy Oncology Group/European Organization for Research and Treatment of Cancer acute and late radiation morbidity scoring scheme for reporting rectal morbidity and noting the incidence of rectal steroid, laser, or antidiarrheal use. Conclusion: It is important to focus on health-related quality-of-life issues in the treatment of prostate cancer, because the control rates are very similar between appropriate treatment modalities. The ABS recommends using the International Prostate Symptom Score, International Index of

Production of metallurgical cokes from some Turkish lignites using sulphite liquor binders

Energy Technology Data Exchange (ETDEWEB)

Yanik, J.; Saglam, M.; Yuksel, M. (Ege University, Izmir (Turkey). Dept. of Chemistry)

1990-04-01

Soma and Tuncbilek lignites were briquetted at 80{degree}C under 0-100 MPa, using varying amounts of sulphite liquor binders. The briquettes were then carbonized at 950{degree}C, and the resulting formed cokes were examined. The effects of the type and concentration of binders, and of the briquetting pressure, on the strength and porosity of the formcokes were investigated. As a result of these experiments, optimal briquetting conditions were established. It was also stated that formcokes made from both Turkish lignite samples under optimal briquetting conditions could be used for metallurgical purposes, particularly in non-ferrous metallurgy. 17 refs., 1 fig., 4 tabs.

American Society for Metabolic and Bariatric Surgery estimation of metabolic and bariatric procedures performed in the United States in 2016.

Science.gov (United States)

English, Wayne J; DeMaria, Eric J; Brethauer, Stacy A; Mattar, Samer G; Rosenthal, Raul J; Morton, John M

2018-03-01

Bariatric surgery, despite being the most successful long-lasting treatment for morbid obesity, remains underused as only approximately 1% of all patients who qualify for surgery actually undergo surgery. To determine if patients in need are receiving appropriate therapy, the American Society for Metabolic and Bariatric Surgery created a Numbers Taskforce to specify annual rate of use for obesity treatment interventions. The objective of this study was to determine metabolic and bariatric procedure trends since 2011 and to provide the best estimate of the number of procedures performed in the United States in 2016. United States. We reviewed data from the Metabolic and Bariatric Surgery Accreditation and Quality Improvement Program, National Surgical Quality Improvement Program, Bariatric Outcomes Longitudinal Database, and Nationwide Inpatient Sample. In addition, data from industry and outpatient centers were used to estimate outpatient center activity. Data from 2016 were compared with the previous 5 years of data. Compared with 2015, the total number of metabolic and bariatric procedures performed in 2016 increased from approximately 196,000 to 216,000. The sleeve gastrectomy trend is increasing, and it continues to be the most common procedure. The gastric bypass and gastric band trends continued to decrease as seen in previous years. The percentage of revision procedures and biliopancreatic diversion with duodenal switch procedures increased slightly. Finally, intragastric balloons placement emerged as a significant contributor to the cumulative total number of procedures performed. There is increasing use of metabolic and bariatric procedures performed in the United States from 2011 to 2016, with a nearly 10% increase noted from 2015 to 2016. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Topical, geospatial, and temporal diffusion of the 2015 North American Menopause Society position statement on nonhormonal management of vasomotor symptoms.

Science.gov (United States)

Carpenter, Janet S; Laine, Tei; Harrison, Blake; LePage, Meghan; Pierce, Taran; Hoteling, Nathan; Börner, Katy

2017-10-01

We sought to depict the topical, geospatial, and temporal diffusion of the 2015 North American Menopause Society position statement on the nonhormonal management of menopause-associated vasomotor symptoms released on September 21, 2015, and its associated press release from September 23, 2015. Three data sources were used: online news articles, National Public Radio, and Twitter. For topical diffusion, we compared keywords and their frequencies among the position statement, press release, and online news articles. We also created a network figure depicting relationships across key content categories or nodes. For geospatial diffusion within the United States, we compared locations of the 109 National Public Radio (NPR) stations covering the statement to 775 NPR stations not covering the statement. For temporal diffusion, we normalized and segmented Twitter data into periods before and after the press release (September 12, 2015 to September 22, 2015 vs September 23, 2015 to October 3, 2015) and conducted a burst analysis to identify changes in tweets from before to after. Topical information diffused across sources was similar with the exception of the more scientific terms "vasomotor symptoms" or "vms" versus the more colloquial term "hot flashes." Online news articles indicated media coverage of the statement was mainly concentrated in the United States. NPR station data showed similar proportions of stations airing the story across the four census regions (Northeast, Midwest, south, west; P = 0.649). Release of the statement coincided with bursts in the menopause conversation on Twitter. The findings of this study may be useful for directing the development and dissemination of future North American Menopause Society position statements and/or press releases.

American Society of Clinical Oncology Summit on Addressing Obesity Through Multidisciplinary Provider Collaboration: Key Findings and Recommendations for Action.

Science.gov (United States)

Ligibel, Jennifer A; Alfano, Catherine M; Hershman, Dawn L; Merrill, Janette K; Basen-Engquist, Karen; Bloomgarden, Zachary T; Demark-Wahnefried, Wendy; Dixon, Suzanne; Hassink, Sandra G; Jakicic, John M; Morton, John Magaña; Okwuosa, Tochi M; Powell-Wiley, Tiffany M; Rothberg, Amy E; Stephens, Mark; Streett, Sarah E; Wild, Robert A; Westman, Eric A; Williams, Ronald J; Wollins, Dana S; Hudis, Clifford A

2017-11-01

Given the increasing evidence that obesity increases the risk of developing and dying from malignancy, the American Society of Clinical Oncology (ASCO) launched an Obesity Initiative in 2013 that was designed to increase awareness among oncology providers and the general public of the relationship between obesity and cancer and to promote research in this area. Recognizing that the type of societal change required to impact the obesity epidemic will require a broad-based effort, ASCO hosted the "Summit on Addressing Obesity through Multidisciplinary Collaboration" in 2016. This meeting was held to review current challenges in addressing obesity within the respective health care provider communities and to identify priorities that would most benefit from a collective and cross-disciplinary approach. Efforts focused on four key areas: provider education and training; public education and activation; research; and policy and advocacy. Summit attendees discussed current challenges in addressing obesity within their provider communities and identified priorities that would most benefit from multidisciplinary collaboration. A synopsis of recommendations to facilitate future collaboration, as well as examples of ongoing cooperative efforts, provides a blueprint for multidisciplinary provider collaboration focused on obesity prevention and treatment. © 2017 The Obesity Society.

Production of highly porous glass-ceramics from metallurgical slag, fly ash and waste glass

OpenAIRE

Mangutova Bianka V.; Fidancevska Emilija M.; Milosevski Milosav I.; Bossert Joerg H.

2004-01-01

Glass-ceramics composites were produced based on fly-ash obtained from coal power stations, metallurgical slag from ferronickel industry and waste glass from TV monitors, windows and flasks. Using 50% waste flask glass in combination with fly ash and 20% waste glass from TV screens in combination with slag, E-modulus and bending strength values of the designed systems are increased (system based on fly ash: E-modulus from 6 to 29 GPa, and bending strength from 9 to 75 MPa). The polyurethane f...

3D Model Studies on the Effect of Bed and Powder Type Upon Radial Static Pressure and Powder Distribution in Metallurgical Shaft Furnaces

Directory of Open Access Journals (Sweden)

Panic B.

2017-09-01

Full Text Available The flow of gases in metallurgical shaft furnaces has a decisive influence on the course and process efficiency. Radial changes in porosity of the bed cause uneven flow of gas along the radius of the reactor, which sometimes is deliberate and intentional. However, holdup of solid particles in descending packed beds of metallurgical shaft furnaces can lead to unintentional changes in porosity of the bed along the radial reactor. Unintentional changes in porosity often disrupt the flow of gas causing poor performance of the furnace. Such disruptions of flow may occur in the blast furnace due to high level of powder content in gas caused by large amount of coal dust/powder insufflated as fuel substitute. The paper describes the model test results of radial distribution of static pressure and powder hold up within metallurgical reactor. The measurements were carried out with the use of 3D physical model of two-phase flow gas-powder in the moving (descending packed bed. Sinter or blast furnace pellets were used as packed bed while carbon powder or iron powder were used as the powder. Wide diversity within both static pressure distribution and powder distribution along the radius of the reactor were observed once the change in the type of powder occurred.

Engagement of the medical-technology sector with society.

Science.gov (United States)

Williams, David; Edelman, Elazer R; Radisic, Milica; Laurencin, Cato; Untereker, Darrel

2017-04-12

The medical-technology sector must educate society in an unbiased rational way about the successes and benefits of biotechnology innovation. Copyright © 2017, American Association for the Advancement of Science.

[Diagnostic criteria for Menière's disease. Consensus document of the Bárány Society, the Japan Society for Equilibrium Research, the European Academy of Otology and Neurotology (EAONO), the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS) and the Korean Balance Society].

Science.gov (United States)

Lopez-Escamez, José A; Carey, John; Chung, Won-Ho; Goebel, Joel A; Magnusson, Måns; Mandalà, Marco; Newman-Toker, David E; Strupp, Michael; Suzuki, Mamoru; Trabalzini, Franco; Bisdorff, Alexandre

2016-01-01

This paper presents diagnostic criteria for Menière's disease jointly formulated by the Classification Committee of the Bárány Society, The Japan Society for Equilibrium Research, the European Academy of Otology and Neurotology (EAONO), the Equilibrium Committee of the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS) and the Korean Balance Society. The classification includes 2 categories: definite Menière's disease and probable Menière's disease. The diagnosis of definite Menière's disease is based on clinical criteria and requires the observation of an episodic vertigo syndrome associated with low-to medium-frequency sensorineural hearing loss and fluctuating aural symptoms (hearing, tinnitus and/or fullness) in the affected ear. Duration of vertigo episodes is limited to a period between 20 min and 12h. Probable Menière's disease is a broader concept defined by episodic vestibular symptoms (vertigo or dizziness) associated with fluctuating aural symptoms occurring in a period from 20 min to 24h. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

Inventory management in a metallurgical of the automotive industry

Directory of Open Access Journals (Sweden)

Marcos Antonio Maia de Oliveira

2015-12-01

Full Text Available This article aims to analyze the importance of inventory management in a metallurgical company, located in Santo André city, in Grande São Paulo, since the inventory management is crucial within a company that wants to survive nowadays, by studying the main features and trends in the methods used for inventory control. In this case study the basic concepts for good control were considered, showing tools currently used in the market, providing data for material purchase, sales control, parts in stock, future orders, MRP, storage space, among others once many companies have high and unnecessary cost of stock for not being aware of the real importance of this control. It is felt that the logistics of the company should invest in technology by purchasing the MRP system, visiting fairs and attending seminars. This way, the company will have better inventory control thus consequently decrease the purchase of materials.

Arsenic precipitation from metallurgical effluents; Precipitacion de arsenico desde efluentes metalurgicos

Energy Technology Data Exchange (ETDEWEB)

Navarro, P.; Vargas, C.; Araya, E.; Martin, I.; Alguacil, F. J.

2004-07-01

In the mining-metallurgical companies different liquid effluents are produced, which can contain a series of dissolved elements that are considered dangerous from an environmental point of view. One of these elements is the arsenic, especially in the state of oxidation +5 that can be precipitated as calcium or iron arsenate. To fulfil the environmental requests it should have in solution a content of arsenic lower than 0,5 mg/l and the obtained solid product should be very stable under the condition in which it will be stored. this work looks for the best conditions of arsenic precipitation, until achieving contents in solution lower than such mentioned concentration. Also, the stability of the precipitates was studied. (Author) 7 refs.

Historical Review of the Correlation of Ballistic and Metallurgical Characteristics of Domestic Armor at Watertown Arsenal

Science.gov (United States)

1945-12-07

really under- stood. It was learned, then that pearlitic and bainitic microstructures imparted poor impact toughness to steels , pearlitic structures...having a more detrimental effect than bainitic structures, and that a steel could show little or no free ferrite and still pofssess poor shock resistance...arsenal for metallurgical study. The studies at the arsenal revealed that presence of bainitic structures in the core of low alloy NS type steels

Tales from the hundred year history of the American Physical Society

Science.gov (United States)

Lustig, H.

1999-05-01

The tale to be told on this occasion - a tale only slightly out of school - is that of the punctuated evolution of the APS in pursuing its hundred years old mission, "the advancement and diffusion of the knowledge of physics". For long periods this goal was pursued, singlemindedly and impressively, through scientfic meetings and the Society's journals. However, within a year of its founding, the APS,in concert with other scientific societies, had already "lobbied" successfully for the establishment of the Bureau of Standards. But then all was quiet on the public front until after World War II. Since that time there have been three waves of forays into the public arena. The first, which spanned the "McCarthy period", was in defense of the freedom of scientists to practice their profession across national boundaries; of the right to announce the results of their research even if they trod on powerful toes (the Astin case); and of individual physicists, such as E.U. Condon and J.Robert Oppenheimer,who had been unfairly accused and badly treated. The second wave occurred in the late sixties and early seventies when, initially much pushed by activist members, the Society's leadership came to grips with broad social issues, such as segregation in the South, the Equal Rights Amendment, and, eventually, arms control and nuclear weapons. The third immersion in public affairs, which is still very much in progress, can be characterized as worrying and speaking out on what physics can do for the country (provide authoritative studies on nuclear energy, renewables, directed energy weapons, etc.) and what the country can do for physics (provide more money). Although lobbying for better funding is still a relatively minor occupation of the Society, it raises the question how physics -an elitist pursuit -can be truthfully and effectively "sold" in a democratic and egalitarian society.

The new totalitarian society

OpenAIRE

Vlajki Emil

2011-01-01

The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout hi...

Powder metallurgical processing of magnetostrictive materials based on rare earth-iron intermetallic compounds

International Nuclear Information System (INIS)

Malekzadeh, M.

1978-01-01

Procedures are described for fabrication of high density rare earth-iron magnetostrictive compounds by powder metallurgical techniques. The fabrication involves a sequence of steps which includes preparing the pre-alloyed compounds, pulverizing them into a fine powder, compacting in suitable sizes and shapes, and sintering. Samples prepared by these procedures are carefully characterized by scanning electron microscopy, x-ray diffraction, dilatometry, and magnetic measurements. Process steps are found to exert important influences upon densities, microstructure and magnetic properties attained after densification. Investigations on a number of these process steps, including milling time and medium, sintering, and magnetic powder alignment are described

Metallurgical study and phase diagram calculations of the Zr-Nb-Fe-(Sn,O) system

International Nuclear Information System (INIS)

Toffolon, C.

2000-01-01

The Framatome M5 TM Zr-Nb-O alloy with small amounts of Fe is of interest for nuclear applications (PWR fuel cladding).The behaviour of this kind of alloy for in-service conditions strongly depends on the microstructure. Therefore, a metallurgical study of alloys of the Zr-Nb-Fe-(O-Sn) system has been developed in order to study the influence of chemical composition variabilities of Nb, Fe and O and thermal treatments on the resultant microstructure. In order to get some insight on the physical metallurgy of Zr-Nb-Fe-(Sn,O) alloys and to minimize the experiments, it is useful to build a thermodynamic database. With this object, it was necessary to re-optimize and to calculate the low order binary systems such as Fe-Nb and Nb-Sn in order to assess the Zr-Nb-Fe-(Sn,O) system. Then, the experimental studies concerned: the influence of small variations in Nb and O contents on the α/β transus temperatures. A comparison between experimental results and thermodynamic predictions showed a good agreement; the precipitation kinetics of βNb and intermetallic phases in the α phase domain. These experiments showed that the kinetics depends on the initial metallurgical conditions; the determination of the crystallographic structure and the stoichiometry of the ternary Zr-Nb-Fe intermetallic compounds as a function of the temperature. Finally, these experimental data were used to propose a first assessment of the Zr-Nb-Fe(O∼1200 ppm) system. (author)

Nickel-based gadolinium alloy for neutron adsorption application in ram packages

International Nuclear Information System (INIS)

Robino, C.; McConnell, P.; Mizia, R.

2004-01-01

This paper will outline the results of a metallurgical development program that is investigating the alloying of gadolinium into a nickel-chromium-molybdenum alloy matrix. Gadolinium has been chosen as the neutron absorption alloying element due to its high thermal neutron absorption cross section and low solubility in the expected U.S. repository environment. The nickel-chromium-molybdenum alloy family was chosen for its known corrosion performance, mechanical properties, and weldability. The workflow of this program includes chemical composition definition, primary and secondary melting studies, ingot conversion processes, properties testing, and national consensus codes and standards work. The microstructural investigation of these alloys shows that the gadolinium addition is not soluble in the primary austenite metallurgical phase and is present in the alloy as gadolinium-rich second phase. This is similar to what is observed in a stainless steel alloyed with boron. The mechanical strength values are similar to those expected for commercial Ni-Cr-Mo alloys. The alloys have been corrosion tested in simulated Yucca Mountain aqueous chemistries with acceptable results. The initial results of weldability tests have also been acceptable. Neutronic testing in a moderated critical array has generated favorable results. An American Society for Testing and Materials material specification has been issued for the alloy and a Code Case has been submitted to the American Society of Mechanical Engineers for code qualification. The ultimate goal is acceptance of the alloy for use at the Yucca Mountain repository

Metallurgical and acoustical characterization of a hydroformed, 304 stainless steel, Caribbean-style musical pan

International Nuclear Information System (INIS)

Murr, L.E.; Gaytan, S.M.; Lopez, M.I.; Bujanda, D.E.; Martinez, E.Y.; Whitmyre, G.; Price, H.

2008-01-01

We report herein the metallurgical and acoustical characterization of hydroformed 304 stainless steel, Caribbean pans. These pans were fully tuned to chromatic tones and compared to a manufactured, low-carbon, Caribbean steel pan standard. Hydroformed platforms had a Vickers microindentation hardness of HV 345, which was reduced by annealing during pan fabrication to HV 270. Skirts welded to the hydroformed head had a microindentation hardness of HV 440. Microstructural characterization by light optical metallography and transmission electron microscopy illustrated microstructures (including grain structures) characteristic of these pan microindentation hardnesses

76 FR 63531 - German-American Day, 2011

Science.gov (United States)

2011-10-12

... Atlantic to seize the promise of the American dream. The same spirit that guided intrepid settlers to help... society, generations of German Americans have helped make America what it is today. The bonds of...

Recommendations for a Standardized Pulmonary Function Report. An Official American Thoracic Society Technical Statement.

Science.gov (United States)

Culver, Bruce H; Graham, Brian L; Coates, Allan L; Wanger, Jack; Berry, Cristine E; Clarke, Patricia K; Hallstrand, Teal S; Hankinson, John L; Kaminsky, David A; MacIntyre, Neil R; McCormack, Meredith C; Rosenfeld, Margaret; Stanojevic, Sanja; Weiner, Daniel J

2017-12-01

The American Thoracic Society committee on Proficiency Standards for Pulmonary Function Laboratories has recognized the need for a standardized reporting format for pulmonary function tests. Although prior documents have offered guidance on the reporting of test data, there is considerable variability in how these results are presented to end users, leading to potential confusion and miscommunication. A project task force, consisting of the committee as a whole, was approved to develop a new Technical Standard on reporting pulmonary function test results. Three working groups addressed the presentation format, the reference data supporting interpretation of results, and a system for grading quality of test efforts. Each group reviewed relevant literature and wrote drafts that were merged into the final document. This document presents a reporting format in test-specific units for spirometry, lung volumes, and diffusing capacity that can be assembled into a report appropriate for a laboratory's practice. Recommended reference sources are updated with data for spirometry and diffusing capacity published since prior documents. A grading system is presented to encourage uniformity in the important function of test quality assessment. The committee believes that wide adoption of these formats and their underlying principles by equipment manufacturers and pulmonary function laboratories can improve the interpretation, communication, and understanding of test results.

Lolita - the American nightmare

OpenAIRE

GRISELDA (ABAZAJ) DANGLLI

2012-01-01

This article deals with the analysis of Lolita seen through the lenses of the American society and norms of today. We will see that many observations of the American way of behaving and social norms still hold true even nowadays years after this novel was written. Nabokov, on the other hand, never accepted the fact that this novel probed into the very depths of American life and that his intentions were purely aesthetic. Nevertheless, the phenomenon of pedophilia, obvious in the book, is a po...

A Survey of the American Society of Anesthesiologists Regarding Environmental Attitudes, Knowledge, and Organization.

Science.gov (United States)

Ard, John L; Tobin, Katherine; Huncke, Tessa; Kline, Richard; Ryan, Susan M; Bell, Charlotte

2016-04-01

Our planet is in the midst of an environmental crisis. Government and international agencies such as the Intergovernmental Panel on Climate Change urge radical and transformative change at every level of how we conduct our personal and professional lives. The health care industry contributes to climate change. According to a study from the University of Chicago, the health care sector accounts for 8% of the United States' total greenhouse gas emissions. In an effort to understand the current state of environmental practice, attitudes, and knowledge among anesthesiologists in the United States, we conducted a survey of American anesthesiologists regarding environmental sustainability. The environmental survey was sent out by e-mail to a random sampling of 5200 members of the American Society of Anesthesiologists. This process was repeated a second time. A total of 2189 anesthesiologists of 5200 responded to the survey, a 42% response rate. Of the survey respondents, 80.1% (confidence interval, 78.2%-81.9%) were interested in recycling. Respondents reported recycling in 27.7% of operating rooms where they work. The majority of respondents (67%; confidence interval, 64%-69%) reported there was insufficient information on how to recycle intraoperatively. Respondents supported sustainability practices such as reprocessing equipment, using prefilled syringes, and donating unused equipment and supplies. The affirmative response rate was 48.4% for reprocessing equipment, 56.6% for using prefilled syringes, and 65.1% for donating equipment and supplies to medical missions. Questions about hospital-wide organization of sustainability programs elicited many "I don't know" responses. Eighteen percent of responders indicated the presence of a sustainability or "green" task force. A total of 12.6% of responders indicated the presence of a mandate from hospital leadership to promote sustainability programs. Two important conclusions drawn from the survey data are a lack of

Powder metallurgical high performance materials. Proceedings. Volume 2: P/M hard materials

Energy Technology Data Exchange (ETDEWEB)

Kneringer, G; Roedhammer, P; Wildner, H [eds.

2001-07-01

The proceedings of these seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15{sup th} Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

Powder metallurgical high performance materials. Proceedings. Volume 2: P/M hard materials

International Nuclear Information System (INIS)

Kneringer, G.; Roedhammer, P.; Wildner, H.

2001-01-01

The proceedings of these seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15 th Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

Asian American Giving to US Higher Education

Science.gov (United States)

Tsunoda, Kozue

2010-01-01

Asian Americans have had significant impacts on and within mainstream US society, and their great efforts and gifts in the name of charitable causes are no exception. This study aims to examine perceptions within American university development offices about Asian American giving to US higher education. The article begins with a literature review…

Americanization of Non-American Storiesin Disney Films

Directory of Open Access Journals (Sweden)

Beta Setiawati

2016-06-01

Full Text Available The study is intended to know the Disney’s animation films characteristics which are adapted from non American stories that contain Americanization in order to be American popular culture products. This qualitative and library research is carried out within the field of American Studies. Disney’s animated films which are regarded as artifacts in order to identify American society and culture is used as her primary data. She then compares those Disney films with the original stories to discover the changes in making those stories become American popular products. She furthermore uses the sources such as books, magazines, journals, articles, and also internet data for her secondary data. The result of this study shows that most of folk narratives which were used in Disney films were adapted from other countries’ stories. However, Disney intentionally adapts foreign countries’ stories in its animated films by using Disney formula to blow up the sale of its products. Since Disney is one of the most powerful media conglomerates in the world, it works endlessly to set out world entertainment. Disney formula in its animated films which has dominated those adapted films are only intended to obtain as much profit as possible without paying attention to the values in children entertainment.

Creating a segregated medical profession: African American physicians and organized medicine, 1846-1910.

Science.gov (United States)

Baker, Robert B; Washington, Harriet A; Olakanmi, Ololade; Savitt, Todd L; Jacobs, Elizabeth A; Hoover, Eddie; Wynia, Matthew K; Blanchard, Janice; Boulware, L Ebony; Braddock, Clarence; Corbie-Smith, Giselle; Crawley, LaVera; LaVeist, Thomas A; Maxey, Randall; Mills, Charles; Moseley, Kathryn L; Williams, David R

2009-06-01

An independent panel of experts, convened by the American Medical Association (AMA) Institute for Ethics, analyzed the roots of the racial divide within American medical organizations. In this, the first of a 2-part report, we describe 2 watershed moments that helped institutionalize the racial divide. The first occurred in the 1870s, when 2 medical societies from Washington, DC, sent rival delegations to the AMA's national meetings: an all-white delegation from a medical society that the US courts and Congress had formally censured for discriminating against black physicians; and an integrated delegation from a medical society led by physicians from Howard University. Through parliamentary maneuvers and variable enforcement of credentialing standards, the integrated delegation was twice excluded from the AMA's meetings, while the all-white society's delegations were admitted. AMA leaders then voted to devolve the power to select delegates to state societies, thereby accepting segregation in constituent societies and forcing African American physicians to create their own, separate organizations. A second watershed involved AMA-promoted educational reforms, including the 1910 Flexner report. Straightforwardly applied, the report's population-based criterion for determining the need for phySicians would have recommended increased training of African American physicians to serve the approximately 9 million African Americans in the segregated south. Instead, the report recommended closing all but 2 African American medical schools, helping to cement in place an African American educational system that was separate, unequal, and destined to be insufficient to the needs of African Americans nationwide.

Report from the Latin American Spondyloarthritis Society for Education and Research in Immunology and Medicine organization 2012 workshop.

Science.gov (United States)

Bautista-Molano, Wilson; Toloza, Sergio; Gutiérrez, Marwin; Uribe, Carlos Vinicio Caballero; Pineda, Carlos; Londoño, John; Santos, Pedro; Jaimes, Diego; Diaz, Mario; Chalem, Phillipe; Villota, Orlando; Sierra, Rita; Puche, William; Salas, José; Yara, José; Hamilton, Gordon; Pardo, Carlos; Mercado, Beatriz; Valle-Oñate, Rafael

2013-09-01

The first annual meeting of the Latin American Spondyloarthritis Society for Education and Research in Immunology and Medicine (LASSERIM) was held in Bogotá, Colombia, in September 2012 and was attended by key opinion leaders, researchers, and rheumatologists. The meeting included presentations and discussions from renowned speakers during 2 days and a coaching leadership exercise led by an expert in the field followed by an open forum. Two groups defined a priori discussed the establishment of a professional network and organization to be involved in the identification, assessment, and effective resolution of health care issues in Latin America.A broad spectrum of topics were discussed but focused on the following: pharmacoeconomics in general rheumatology, spondyloarthritis and chronic back pain, therapeutic interventions in rheumatoid arthritis, ultrasonography in spondyloarthritis, impact of social media in medicine and global trends in leadership, quality of life, and innovation. A special workshop on coaching in health care and coaching as a tool to implement LASSERIM goals was part of the 2-day conference.LASSERIM will be working in the future on education, research, and innovation in the field of rheumatology and immunology. A special focus will be on spondyloarthritis, by promoting research, open discussions, and by conducting carefully planned research studies to impact on the quality of life of patients and doctors from Latin American countries.

Oxide nano-rod array structure via a simple metallurgical process

International Nuclear Information System (INIS)

Nanko, M; Do, D T M

2011-01-01

A simple method for fabricating oxide nano-rod array structure via metallurgical process is reported. Some dilute alloys such as Ni(Al) solid solution shows internal oxidation with rod-like oxide precipices during high-temperature oxidation with low oxygen partial pressure. By removing a metal part in internal oxidation zone, oxide nano-rod array structure can be developed on the surface of metallic components. In this report, Al 2 O 3 or NiAl 2 O 4 nano-rod array structures were prepared by using Ni(Al) solid solution. Effects of Cr addition into Ni(Al) solid solution on internal oxidation were also reported. Pack cementation process for aluminizing of Ni surface was applied to prepare nano-rod array components with desired shape. Near-net shape Ni components with oxide nano-rod array structure on their surface can be prepared by using the pack cementation process and internal oxidation,

An American Thoracic Society Official Research Statement: Future Directions in Lung Fibrosis Research.

Science.gov (United States)

White, Eric S; Borok, Zea; Brown, Kevin K; Eickelberg, Oliver; Guenther, Andreas; Jenkins, R Gisli; Kolb, Martin; Martinez, Fernando J; Roman, Jesse; Sime, Patricia

2016-04-01

Pulmonary fibrosis encompasses a group of lung-scarring disorders that occur owing to known or unknown insults and accounts for significant morbidity and mortality. Despite intense investigation spanning decades, much remains to be learned about the natural history, pathophysiology, and biologic mechanisms of disease. To identify the most pressing research needs in the lung fibrosis community and to provide a roadmap of priorities to investigators, funding agencies, patient advocacy groups, and other interested stakeholders. An ad hoc international working group of the American Thoracic Society with experience in clinical, translational, and bench-based research in fibrotic lung diseases was convened. The group used an iterative consensus process to identify successes and challenges in pulmonary fibrosis research. The group identified five main priority areas in which substantial resources should be invested to advance our understanding and to develop novel therapies for patients with pulmonary fibrosis. These priorities include develop newer models of human lung fibrosis, engage current and new stakeholders to provide sustained funding for the initiatives, create a global infrastructure for storing patient-derived materials, establish collaborative preclinical and clinical research networks in fibrotic lung disease, and create a global lung fibrosis initiative that unites these multifaceted efforts into a single virtual umbrella structure. Despite recent advances in the treatment of some forms of lung fibrosis, many gaps in knowledge about natural history, pathophysiology, and treatment remain. Investment in the research priorities enumerated above will help address these shortcomings and enhance patient care worldwide.

American Society of Clinical Oncology Strategic Plan for Increasing Racial and Ethnic Diversity in the Oncology Workforce.

Science.gov (United States)

Winkfield, Karen M; Flowers, Christopher R; Patel, Jyoti D; Rodriguez, Gladys; Robinson, Patricia; Agarwal, Amit; Pierce, Lori; Brawley, Otis W; Mitchell, Edith P; Head-Smith, Kimberly T; Wollins, Dana S; Hayes, Daniel F

2017-08-01

In December 2016, the American Society of Clinical Oncology (ASCO) Board of Directors approved the ASCO Strategic Plan to Increase Racial and Ethnic Diversity in the Oncology Workforce. Developed through a multistakeholder effort led by the ASCO Health Disparities Committee, the purpose of the plan is to guide the formal efforts of ASCO in this area over the next three years (2017 to 2020). There are three primary goals: (1) to establish a longitudinal pathway for increasing workforce diversity, (2) to enhance ASCO leadership diversity, and (3) to integrate a focus on diversity across ASCO programs and policies. Improving quality cancer care in the United States requires the recruitment of oncology professionals from diverse backgrounds. The ASCO Strategic Plan to Increase Racial and Ethnic Diversity in the Oncology Workforce is designed to enhance existing programs and create new opportunities that will move us closer to the vision of achieving an oncology workforce that reflects the demographics of the US population it serves.

Hedonism And Materialism As Negative Effects Of Social Changes In American Society Potrayed In The Novel This Side Of Paradise Written By F. Scott Fitzgerald

OpenAIRE

Elysia, Irene Nyssa

2015-01-01

Judul skripsi ini adalah ‘HEDONISM AND MATERIALISM AS NEGATIVE EFFECTS OF SOCIAL CHANGES IN AMERICAN SOCIETY POTRAYED IN THE NOVEL THIS SIDE OF PARADISE WRITTEN BY F. SCOTT FITZGERALD’. Sesuai dengan judulnya, skripsi ini membahas tentang fenomena hedonisme dan materialisme yang terjadi di Amerika pada awal tahun 1920an, sebagai dampak negatif dari Perang Dunia I. Fenomena ini dapat dibuktikan dari gambaran yang dipaparkan oleh Scott melalui novel ini, yaitu tentang kondisi masyarakat terutam...

Interventional Spine and Pain Procedures in Patients on Antiplatelet and Anticoagulant Medications (Second Edition): Guidelines From the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

Science.gov (United States)

Narouze, Samer; Benzon, Honorio T; Provenzano, David; Buvanendran, Asokumar; De Andres, José; Deer, Timothy; Rauck, Richard; Huntoon, Marc A

2018-04-01

The American Society of Regional Anesthesia and Pain Medicine (ASRA) 2012 survey of meeting attendees showed that existing ASRA anticoagulation guidelines for regional anesthesia were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors required separate guidelines for pain and spine procedures. In response, a guidelines committee was formed. After preliminary review of published complications reports and studies, the committee stratified interventional spine and pain procedures according to potential bleeding risk: low-, intermediate-, and high-risk procedures. The ASRA regional anesthesia anticoagulation guidelines were largely deemed appropriate for the low- and intermediate-risk categories, but the high-risk category required further investigation. The first guidelines specific to interventional spine and pain procedures were published in 2015. Recent reviews evaluating bleeding complications in patients undergoing specific interventional pain procedures, the development of new regional anesthesia and acute pain guidelines, and the development of new anticoagulants and antiplatelet medications necessitate complementary updated guidelines. The authors desired coordination with the authors of the recently updated regional and acute pain anticoagulation guidelines. The latest evidence was sought through extensive database search strategies and the recommendations were evidence based when available and pharmacology driven otherwise. We could not provide strength and grading of these recommendations because there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations. This publication is intended as a living document to be updated

Metallurgical Effects of Shunting Current on Resistance Spot-Welded Joints of AA2219 Sheets

Science.gov (United States)

Jafari Vardanjani, M.; Araee, A.; Senkara, J.; Jakubowski, J.; Godek, J.

2016-08-01

Shunting effect is the loss of electrical current via the secondary circuit provided due to the existence of previous nugget in a series of welding spots. This phenomenon influences on metallurgical aspects of resistance spot-welded (RSW) joints in terms of quality and performance. In this paper RSW joints of AA2219 sheets with 1 mm thickness are investigated metallurgically for shunted and single spots. An electro-thermal finite element analysis is performed on the RSW process of shunted spot and temperature distribution and variation are obtained. These predictions are then compared with experimental micrographs. Three values of 5 mm, 20 mm, and infinite (i.e., single spot) are assumed for welding distance. Numerical and experimental results are matching each other in terms of nugget and HAZ geometry as increasing distance raised nugget size and symmetry of HAZ. In addition, important effect of shunting current on nugget thickness, microstructure, and Copper segregation on HAZ grain boundaries were discovered. A quantitative analysis is also performed about the influence of welding distance on important properties including ratio of nugget thickness and diameter ( r t), ratio of HAZ area on shunted and free side of nugget ( r HA), and ratio of equivalent segregated and total amount of Copper, measured in sample ( r Cu) on HAZ. Increasing distance from 5 mm to infinite, indicated a gain of 111.04, -45.55, and -75.15% in r t, r HA, and r Cu, respectively, while obtained ratios for 20 mm welding distance was suitable compared to single spot.

An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

2016-07-15

Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

The European Society of Regional Anaesthesia and Pain Therapy/American Society of Regional Anesthesia and Pain Medicine Recommendations on Local Anesthetics and Adjuvants Dosage in Pediatric Regional Anesthesia.

Science.gov (United States)

Suresh, Santhanam; Ecoffey, Claude; Bosenberg, Adrian; Lonnqvist, Per-Anne; de Oliveira, Gildasio S; de Leon Casasola, Oscar; de Andrés, José; Ivani, Giorgio

2018-02-01

Dosage of local anesthetics (LAs) used for regional anesthesia in children is not well determined. In order to evaluate and come to a consensus regarding some of these controversial topics, The European Society of Regional Anaesthesia and Pain Therapy (ESRA) and the American Society of Regional Anesthesia and Pain Medicine (ASRA) developed a Joint Committee Practice Advisory on Local Anesthetics and Adjuvants Dosage in Pediatric Regional Anesthesia. Representatives from both ASRA and ESRA composed the joint committee practice advisory. Evidence-based recommendations were based on a systematic search of the literature. In cases where no literature was available, expert opinion was elicited. Spinal anesthesia with bupivacaine can be performed with a dose of 1 mg/kg for newborn and/or infant and a dose of 0.5 mg/kg in older children (>1 year of age). Tetracaine 0.5% is recommended for spinal anesthesia (dose, 0.07-0.13 mL/kg). Ultrasound-guided upper-extremity peripheral nerve blocks (eg, axillary, infraclavicular, interscalene, supraclavicular) in children can be performed successfully and safely using a recommended LA dose of bupivacaine or ropivacaine of 0.5 to 1.5 mg/kg. Dexmedetomidine can be used as an adjunct to prolong the duration of peripheral nerve blocks in children. High-level evidence is not yet available to guide dosage of LA used in regional blocks in children. The ASRA/ESRA recommendations intend to provide guidance in order to reduce the large variability of LA dosage currently observed in clinical practice.

M-Area and Metallurgical Laboratory Hazardous Waste Management Facilities Groundwater Monitoring and Corrective-Action Report, First and Second Quarters 1999, Volume III

International Nuclear Information System (INIS)

Chase, J.

1999-01-01

This report describes the groundwater monitoring and corrective-action program at the M-Area Hazardous Waste Management Facility (HWMF) and the Metallurgical Laboratory (Met Lab) HWMF at the Savannah River Site (SRS) during the first and second quarters 1999

Screening Out Controversy: Human Genetics, Emerging Techniques of Diagnosis, and the Origins of the Social Issues Committee of the American Society of Human Genetics, 1964-1973.

Science.gov (United States)

Mitchell, M X

2017-05-01

In the years following World War II, and increasingly during the 1960s and 1970s, professional scientific societies developed internal sub-committees to address the social implications of their scientific expertise (Moore, Disrupting Science: Social Movements, American Scientists, and the Politics of the Military, 1945-1975. Princeton: Princeton University Press, 2008). This article explores the early years of one such committee, the American Society of Human Genetics' "Social Issues Committee," founded in 1967. Although the committee's name might suggest it was founded to increase the ASHG's public and policy engagement, exploration of the committee's early years reveals a more complicated reality. Affronted by legislators' recent unwillingness to seek the expert advice of human geneticists before adopting widespread neonatal screening programs for phenylketonuria (PKU), and feeling pressed to establish their relevance in an increasingly resource-scarce funding environment, committee members sought to increase the discipline's expert authority. Painfully aware of controversy over abortion rights and haunted by the taint of the discipline's eugenic past, however, the committee proceeded with great caution. Seeking to harness interest in and assert professional control over emerging techniques of genetic diagnosis, the committee strove to protect the society's image by relegating ethical and policy questions about their use to the individual consciences of member scientists. It was not until 1973, after the committee's modest success in organizing support for a retrospective public health study of PKU screening and following the legalization of abortion on demand, that the committee decided to take a more publicly engaged stance.

November 2017 Arizona thoracic society notes

Directory of Open Access Journals (Sweden)

Robbins RA

2017-11-01

Full Text Available No abstract available. Article truncated after 150 words. The November 2017 Arizona Thoracic Society meeting was held on Wednesday, November 15, 2017 at the HonorHealth Rehabilitation Hospital beginning at 6:30 PM. This was a dinner meeting with a lecture followed by case presentations. There were 15 in attendance representing the pulmonary, critical care, sleep, allergy, infectious disease and radiology communities. At the beginning of the meeting several issues were discussed: 1. CME offered by the Southwest Journal of Pulmonary and Critical Care Medicine (SWJPCC is currently offered to only the Southwest state thoracic societies and the Mayo Clinic. After discussion it was felt that this restriction of access was no longer appropriate and CME credits should be available to all. 2. Efforts continue to obtain CME for the Arizona Thoracic Society meetings. Our Chapter Representative, Dr. Gerry Schwartzberg, is approaching this with the American Thoracic Society. Locally, HonorHealth sent out a survey on CME needs. Members were encouraged …

April 2014 Arizona thoracic society notes

Directory of Open Access Journals (Sweden)

Robbins RA

2014-04-01

Full Text Available No abstract available. Article truncated at 150 words. The April 2014 Arizona Thoracic Society meeting was held on Wednesday, 4/23/2014 at Scottsdale Shea Hospital beginning at 6:30 PM. There were 15 in attendance representing the pulmonary, critical care, sleep, pathology and radiology communities. It was announced that there will be a wine tasting with the California, New Mexico and Colorado Thoracic Societies at the American Thoracic Society International Meeting. The tasting will be led by Peter Wagner and is scheduled for the Cobalt Room in the Hilton San Diego Bayfront on Tuesday, May 20, from 4-8 PM. Guideline development was again discussed. The consensus was to await publication of the IDSA Cocci Guidelines and respond appropriately. George Parides, Arizona Chapter Representative, gave a presentation on Hill Day. Representatives of the Arizona, New Mexico and Washington Thoracic Societies met with their Congressional delegations, including Rep. David Schweikert, to discuss the Cigar Bill, NIH funding, and the Medicare Sustainable Growth ...

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 2

Science.gov (United States)

Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

1989-01-01

The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 2

Science.gov (United States)

Bannerot, Richard B.; Goldstein, Stanley H.

1989-01-01

The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JCS. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 1

Science.gov (United States)

Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

1989-01-01

The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 1

Science.gov (United States)

Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

1989-01-01

The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 2

Science.gov (United States)

Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

1992-01-01

The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document contains reports 13 through 24.

National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 1

Science.gov (United States)

Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

1992-01-01

The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports 1 through 12.

Ethnic Minority Psychological Associations and the Society of Counseling Psychology: Greater Connections

Science.gov (United States)

Lau, Michael Y.; Forrest, Linda; Delgado-Romero, Edward A.

2012-01-01

This article provides a summary of the Major Contribution on the Ethnic Minority Psychological Associations (Asian American Psychological Association, The Association of Black Psychologists, National Latina/o Psychological Association, Society of Indian Psychologists, and American Psychological Association Division 45) and their connections to…

Metallurgical Characterization of a Weld Bead Coating Applied by the PTA Process on the D2 Tool Steel

Directory of Open Access Journals (Sweden)

Ali Tahaei

Full Text Available Abstract In this investigation, a nickel-base powder mixed with tungsten carbide particles was applied by Plasma Transferred Arc welding (PTA on the surface of the D2 cold work tool steel to improve surface quality and to extend its lifetime during applications. The Design of Experiment (DoE method was applied to obtain the appropriate combination of hardfacing parameters and to run the minimum number of tests. Current, travel speed and preheat were considered as variable parameters. These parameters are important to reach a final layer with an appropriate bead geometry accompanied with good metallurgical properties. All samples were prepared for metallurgical investigations and the effect of process parameters on the weld bead geometry was considered. For each experiment run, weld bead geometry parameters were measured including dilution, penetration and reinforcement. Microstructures and the distribution of tungsten carbide particles after welding were analyzed by Optical Microscopy (OM and Scanning Electron Microscopy (SEM equipped with an EDS microprobe. In addition, hardness tests were performed to evaluate the mechanical properties of the weld bead layers. Finally, among all the experiments, the best sample with appropriate bead geometry and microstructure was selected.

ECOLOGICAL MANAGEMENT IN THE MINING AND METALLURGICAL MARAMURES AREA

Directory of Open Access Journals (Sweden)

Viorel POP

2015-04-01

Full Text Available The paper is part of the interdisciplinary recent concerns of "environmental management", looking to determine the damages caused by pollution, remediation expenditures, and benefits that may arise through the application of remediation techniques and decontamination technologies in the mining and metallurgical Maramureş area. Large areas of land were diverted from their original destination (pastures, arable land, forests being now covered with ponds and dumps of mine or flotation tailings, deposits that are insufficiently protected, and have become sources of pollution to surrounding areas. All Eastern European countries have in common major environmental problems, the most serious being due to mining, metallurgy and chemistry. In the relationship of "economic-ecological" equilibrium, should be considered both economic criteria, as well as ecological ones. Pollution as the deterioration of environment, requires costs for rehabilitation of degraded areas, and for environmental protection, costs for new technologies, non polluting ones. The assessment foundation of environmental damages, is necessary for establishing the priority directions in the allocation of funds for projects to protect and rehabilitate the environment.

Comparison of Performance Characteristics of American College of Radiology TI-RADS, Korean Society of Thyroid Radiology TIRADS, and American Thyroid Association Guidelines.

Science.gov (United States)

Middleton, William D; Teefey, Sharlene A; Reading, Carl C; Langer, Jill E; Beland, Michael D; Szabunio, Margaret M; Desser, Terry S

2018-05-01

The American College of Radiology (ACR) Thyroid Imaging Reporting and Data System (TI-RADS) provides guidelines to practitioners who interpret sonographic examinations of thyroid nodules. The purpose of this study is to compare the ACR TI-RADS system with two other well-established guidelines. The ACR TI-RADS, the Korean Society of Thyroid Radiology (KSThR) Thyroid Imaging Reporting and Data System (TIRADS), and the American Thyroid Association guidelines were compared using 3422 thyroid nodules for which pathologic findings were available. The composition, echogenicity, margins, echogenic foci, and size of the nodules were assessed to determine whether a recommendation would be made for fine-needle aspiration or follow-up sonography when each system was used. The biopsy yield of malignant findings, the yield of follow-up, and the percentage of malignant and benign nodules that would be biopsied were determined for all nodules and for nodules 1 cm or larger. The percentage of nodules that could not be classified was 0%, 3.9%, and 13.9% for the ACR TI-RADS, KSThR TIRADS, and ATA guidelines, respectively. The biopsy yield of malignancy was 14.2%, 10.2%, and 10.0% for nodules assessed by the ACR TI-RADS, KSThR TIRADS, and ATA guidelines, respectively. The percentage of malignant nodules that were biopsied was 68.2%, 78.7%, and 75.9% for the ACR TI-RADS, the KSThR TIRADS, and the ATA guidelines, respectively, whereas the percentage of malignant nodules that would be either biopsied or followed was 89.2% for the ACR TI-RADS. The percentage of benign nodules that would be biopsied was 47.1%, 79.7%, and 78.1% for the ACR TI-RADS, the KSThR TIRADS, and the ATA guidelines, respectively. The percentage of benign nodules that would be either biopsied or followed was 65.2% for the ACR TI-RADS. The ACR TI-RADS performs well when compared with other well-established guidelines.

Determination of Japanese buyer valuation of metallurgical coal characteristics by hedonic modeling

Energy Technology Data Exchange (ETDEWEB)

Koerner, R.J. [Griffith University, Brisbane, Qld. (Australia). Graduate School of Management

2001-09-01

Considerable efforts have been devoted by econometric researchers to understanding Japanese steel mill (JSM) metallurgical coal valuation policies, and whether such policies disadvantage coal exporters. Much of this research has employed the hedonic regression modeling technique of Rosen and examines the significance of coal quality in establishing market price. This article discusses shortcomings in some such modeling studies, and presents results of additional hedonic modeling to buttress findings of previous work suggesting that cross-cultural bargaining factors rather than coal quality explain lower prices for Australian coals in Japanese market settlements. Policy changes that might be effective in ameliorating bilateral market distortions arising from oligopsony characteristics exhibited in JSM contract settlements are then explored. 29 refs., 2 figs., 2 tabs.

Pb pollution from leaded gasoline in South America in the context of a 2000-year metallurgical history.

Science.gov (United States)

Eichler, Anja; Gramlich, Gabriela; Kellerhals, Thomas; Tobler, Leonhard; Schwikowski, Margit

2015-03-01

Exploitation of the extensive polymetallic deposits of the Andean Altiplano in South America since precolonial times has caused substantial emissions of neurotoxic lead (Pb) into the atmosphere; however, its historical significance compared to recent Pb pollution from leaded gasoline is not yet resolved. We present a comprehensive Pb emission history for the last two millennia for South America, based on a continuous, high-resolution, ice core record from Illimani glacier. Illimani is the highest mountain of the eastern Bolivian Andes and is located at the northeastern margin of the Andean Altiplano. The ice core Pb deposition history revealed enhanced Pb enrichment factors (EFs) due to metallurgical processing for silver production during periods of the Tiwanaku/Wari culture (AD 450-950), the Inca empires (AD 1450-1532), colonial times (AD 1532-1900), and tin production at the beginning of the 20th century. After the 1960s, Pb EFs increased by a factor of 3 compared to the emission level from metal production, which we attribute to gasoline-related Pb emissions. Our results show that anthropogenic Pb pollution levels from road traffic in South America exceed those of any historical metallurgy in the last two millennia, even in regions with exceptional high local metallurgical activity.

Pb pollution from leaded gasoline in South America in the context of a 2000-year metallurgical history

Science.gov (United States)

Eichler, Anja; Gramlich, Gabriela; Kellerhals, Thomas; Tobler, Leonhard; Schwikowski, Margit

2015-01-01

Exploitation of the extensive polymetallic deposits of the Andean Altiplano in South America since precolonial times has caused substantial emissions of neurotoxic lead (Pb) into the atmosphere; however, its historical significance compared to recent Pb pollution from leaded gasoline is not yet resolved. We present a comprehensive Pb emission history for the last two millennia for South America, based on a continuous, high-resolution, ice core record from Illimani glacier. Illimani is the highest mountain of the eastern Bolivian Andes and is located at the northeastern margin of the Andean Altiplano. The ice core Pb deposition history revealed enhanced Pb enrichment factors (EFs) due to metallurgical processing for silver production during periods of the Tiwanaku/Wari culture (AD 450–950), the Inca empires (AD 1450–1532), colonial times (AD 1532–1900), and tin production at the beginning of the 20th century. After the 1960s, Pb EFs increased by a factor of 3 compared to the emission level from metal production, which we attribute to gasoline-related Pb emissions. Our results show that anthropogenic Pb pollution levels from road traffic in South America exceed those of any historical metallurgy in the last two millennia, even in regions with exceptional high local metallurgical activity. PMID:26601147

Embryo transfer techniques: an American Society for Reproductive Medicine survey of current Society for Assisted Reproductive Technology practices.

Science.gov (United States)

Toth, Thomas L; Lee, Malinda S; Bendikson, Kristin A; Reindollar, Richard H

2017-04-01

To better understand practice patterns and opportunities for standardization of ET. Cross-sectional survey. Not applicable. Not applicable. An anonymous 82-question survey was emailed to the medical directors of 286 Society for Assisted Reproductive Technology member IVF practices. A follow-up survey composed of three questions specific to ET technique was emailed to the same medical directors. Descriptive statistics of the results were compiled. The survey assessed policies, protocols, restrictions, and specifics pertinent to the technique of ET. There were 117 (41%) responses; 32% practice in academic settings and 68% in private practice. Responders were experienced clinicians, half of whom had performed Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Widespread pollution of the South American atmosphere predates the industrial revolution by 240 years

Science.gov (United States)

Uglietti, Chiara; Gabrielli, Paolo; Cooke, Colin; Vallelonga, Paul; Thompson, Lonnie

2015-04-01

In the Southern Hemisphere, evidence for preindustrial atmospheric pollution is restricted to a few geological archives of low temporal resolution that record trace element deposition originating from past mining and metallurgical operations in South America. Therefore the timing and the spatial impact of these activities on the past atmosphere remain poorly constrained. Here we present an annually resolved ice-core record (793-1989 AD) from the high altitude drilling site of Quelccaya (Peru) that archives preindustrial and industrial variations in trace elements. During the pre-colonial period (i.e., pre-1532 AD), the deposition of trace elements was mainly dominated by the fallout of aeolian dust and of ash from occasional volcanic eruptions indicating that metallurgic production during the Inca Empire (1438-1532 AD) had a negligible impact on the South American atmosphere. In contrast, a widespread anthropogenic signal is evident after 1540 AD, which corresponds with the beginning of colonial mining and metallurgy in Peru and Bolivia, 240 years prior to the Industrial Revolution. This shift was due to a major technological transition for silver extraction in South America (1572 AD), from lead-based smelting to mercury amalgamation, which precipitated a massive increase in mining activities. However, deposition of toxic trace metals during the Colonial era was still several factors lower than 20th century pollution that was unprecedented over the entirety of human history.

Widespread pollution of the South American atmosphere predates the industrial revolution by 240 y.

Science.gov (United States)

Uglietti, Chiara; Gabrielli, Paolo; Cooke, Colin A; Vallelonga, Paul; Thompson, Lonnie G

2015-02-24

In the Southern Hemisphere, evidence for preindustrial atmospheric pollution is restricted to a few geological archives of low temporal resolution that record trace element deposition originating from past mining and metallurgical operations in South America. Therefore, the timing and the spatial impact of these activities on the past atmosphere remain poorly constrained. Here we present an annually resolved ice core record (A.D. 793-1989) from the high-altitude drilling site of Quelccaya (Peru) that archives preindustrial and industrial variations in trace elements. During the precolonial period (i.e., pre-A.D. 1532), the deposition of trace elements was mainly dominated by the fallout of aeolian dust and of ash from occasional volcanic eruptions, indicating that metallurgic production during the Inca Empire (A.D. 1438-1532) had a negligible impact on the South American atmosphere. In contrast, a widespread anthropogenic signal is evident after around A.D. 1540, which corresponds with the beginning of colonial mining and metallurgy in Peru and Bolivia, ∼240 y before the Industrial Revolution. This shift was due to a major technological transition for silver extraction in South America (A.D. 1572), from lead-based smelting to mercury amalgamation, which precipitated a massive increase in mining activities. However, deposition of toxic trace metals during the Colonial era was still several factors lower than 20th century pollution that was unprecedented over the entirety of human history.

Emissions from pre-Hispanic metallurgy in the South American atmosphere.

Directory of Open Access Journals (Sweden)

François De Vleeschouwer

Full Text Available Metallurgical activities have been undertaken in northern South America (NSA for millennia. However, it is still unknown how far atmospheric emissions from these activities have been transported. Since the timing of metallurgical activities is currently estimated from scarce archaeological discoveries, the availability of reliable and continuous records to refine the timing of past metal deposition in South America is essential, as it provides an alternative to discontinuous archives, as well as evidence for global trace metal transport. We show in a peat record from Tierra del Fuego that anthropogenic metals likely have been emitted into the atmosphere and transported from NSA to southern South America (SSA over the last 4200 yrs. These findings are supported by modern time back-trajectories from NSA to SSA. We further show that apparent anthropogenic Cu and Sb emissions predate any archaeological evidence for metallurgical activities. Lead and Sn were also emitted into the atmosphere as by-products of Inca and Spanish metallurgy, whereas local coal-gold rushes and the industrial revolution contributed to local contamination. We suggest that the onset of pre-Hispanic metallurgical activities is earlier than previously reported from archaeological records and that atmospheric emissions of metals were transported from NSA to SSA.

Emissions from pre-Hispanic metallurgy in the South American atmosphere.

Science.gov (United States)

De Vleeschouwer, François; Vanneste, Heleen; Mauquoy, Dmitri; Piotrowska, Natalia; Torrejón, Fernando; Roland, Thomas; Stein, Ariel; Le Roux, Gaël

2014-01-01

Metallurgical activities have been undertaken in northern South America (NSA) for millennia. However, it is still unknown how far atmospheric emissions from these activities have been transported. Since the timing of metallurgical activities is currently estimated from scarce archaeological discoveries, the availability of reliable and continuous records to refine the timing of past metal deposition in South America is essential, as it provides an alternative to discontinuous archives, as well as evidence for global trace metal transport. We show in a peat record from Tierra del Fuego that anthropogenic metals likely have been emitted into the atmosphere and transported from NSA to southern South America (SSA) over the last 4200 yrs. These findings are supported by modern time back-trajectories from NSA to SSA. We further show that apparent anthropogenic Cu and Sb emissions predate any archaeological evidence for metallurgical activities. Lead and Sn were also emitted into the atmosphere as by-products of Inca and Spanish metallurgy, whereas local coal-gold rushes and the industrial revolution contributed to local contamination. We suggest that the onset of pre-Hispanic metallurgical activities is earlier than previously reported from archaeological records and that atmospheric emissions of metals were transported from NSA to SSA.

NMR investigation of boron impurities in refined metallurgical grade silicon

Energy Technology Data Exchange (ETDEWEB)

Grafe, Hans-Joachim; Loeser, Wolfgang; Schmitz, Steffen; Sakaliyska, Miroslava [Leibniz Institute for Solid State and Materials Research (IFW), Dresden (Germany); Wurmehl, Sabine [Leibniz Institute for Solid State and Materials Research (IFW), Dresden (Germany); Institute for Solid State Physics, Technische Universitaet Dresden (Germany); Eisert, Stefan; Reichenbach, Birk; Mueller, Tim [Adensis GmbH, Dresden (Germany); Acker, Joerg; Rietig, Anja; Ducke, Jana [Department of Chemistry, Faculty for Natural Sciences, Brandenburg Technical University Cottbus-Senftenberg, Senftenberg (Germany)

2015-09-15

The nuclear magnetic resonance (NMR) method was applied for tracking boron impurities in the refining process of metallurgical grade (MG) silicon. From the NMR signal of the {sup 11}B isotope at an operating temperature 4.2 K, the boron concentration can be estimated down to the order of 1-10 wppm B. After melting and resolidification of MG-Si alloyed with Ca and Ti, a major fraction of B impurities remains in the Si solid solution as inferred from the characteristic NMR frequency. The alloying element Ti does not form substantial fractions of TiB{sub 2}. Acid leaching of crushed powders of MG-Si alloyed with Ca and Ti can diminish the initial impurity content of B suggesting its accumulation in the grain boundary phases. NMR signals of TiB{sub 2} at 4.2 K and room temperature (RT), and of poly-Si with different B doping at 4.2 K. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Friction, adhesion and corrosion performance of metallurgical coatings in HTGR-helium

International Nuclear Information System (INIS)

Engel, R.; Kleemann, W.

1981-01-01

The friction-, adhesion-, thermal cycling- and corrosion performance of several metallurgical coating systems have been tested in a simulated HTGR-test atmosphere at elevated temperatures. The coatings were applied to a solid solution strengthened Ni-based superalloy. Component design requires coatings for the protection of mating surfaces, since under reactor operating conditions, contacting surfaces of metallic components under high pressures are prone to friction and wear damage. The coatings will have to protect the metal surface for 30 years up to 950 0 C in HTGR-helium. The materials tested were various refractory carbides with or without metallic binders and intermetallic compounds. The coatings evaluated were applied by plasma spraying-, detonation gun- and chemical vapor deposition techniques. These yielded two types of coatings which employ different mechanisms to improve the tribiological properties and maintain coating integrity. (Auth.)

Method of purifying metallurgical grade silicon employing reduced pressure atmospheric control

Science.gov (United States)

Ingle, W. M.; Thompson, S. W.; Chaney, R. E. (Inventor)

1979-01-01

A method in which a quartz tube is charged with chunks of metallurgical grade silicon and/or a mixture of such chunks and high purity quartz sand, and impurities from a class including aluminum, boron, as well as certain transition metals including nickel, iron, and manganese is described. The tube is then evacuated and heated to a temperature within a range of 800 C to 1400 C. A stream of gas comprising a reactant, such as silicon tetrafluoride, is continuously delivered at low pressures through the charge for causing a metathetical reaction of impurities of the silicon and the reactant to occur for forming a volatile halide and leaving a residue of silicon of an improved purity. The reactant which included carbon monoxide gas and impurities such as iron and nickel react to form volatile carbonyls.

Orlando Magic: report from the 57th meeting of the American Society of Haematology, 5-7 December 2015, Orlando, USA.

Science.gov (United States)

Mazzarella, Luca

2016-01-01

The 57th American Society of Haematology (ASH) meeting held in Orlando, FL was certainly the year when myeloma management changed for good, with a plethora of newly Food and Drug Administration (FDA)-approved drugs showing impressive outcome improvements and the introduction of new techniques for disease monitoring. Also, chimeric antigen receptor (CAR) T cells continued their triumphal march, consolidating their success in lymphoma and chronic lymhocytic leukaemia (CLL) and venturing into new fields such as again multiple myeloma. Some experimental drugs showed long-awaited results (midostaurin in FLT3-mutated acute myeloid leukaemia (AML)) and some brand new drugs showed promising results in the clinic after extensive preclinical studies, such as those targeting new epigenetic factors (histone methyltransferases) and apoptosis.

Globalization and State–Society Relations in Africa

African Journals Online (AJOL)

sulaiman.adebowale

2008-10-20

Oct 20, 2008 ... Department of African and African American Studies, Pennsylvania State .... higher taxes and state provision of greater public services (Findlay and Wellisz ... the impacts of new globalization on state–society relations in Africa is placed ... In any case, the experience of Africa's incorporation into the global.

American brachytherapy society recommends no change for prostate permanent implant dose prescriptions using iodine-125 or palladium-103

International Nuclear Information System (INIS)

Rivard, M.J.; Butler, W.M.; Merrick, G.S.; Devlin, P.M.; Hayes, J.K.; Hearn, R.A.; Lief, E.P.; Meigooni, A.S.; Williamson, J.F.

2008-01-01

Purpose - In 2004, the American Association of Physicists in Medicine (AAPM) issued a report outlining recommended 125 I and 103 Pd datasets for consistency in calculating brachytherapy dose distributions. In 2005, to aid evaluating the clinical impact of implementing these datasets, the AAPM assessed the historical dependence of how prescribed doses differed from administered doses for 125 I and 103 Pd for permanent implantation of the prostate. Consequently, the American Brachytherapy Society (ABS) considered the nature of these changes towards issuing recommended dose prescriptions for 125 I and 103 Pd interstitial brachytherapy implants for mono-therapy and standard boosts. Methods and materials - An investigation was performed of the 2005 AAPM analysis to determine changes in administered dose while affixing prescribed dose using 2004 AAPM 125 I and 103 Pd brachytherapy dosimetry datasets for prostate implants. For 125 I and 103 Pd, administered dose would change by +1.4% and +4.2%, respectively. The biological and societal impact of changing prescribed dose was considered. Results - Based on the need for clinical constancy and in recognition of overall uncertainties, the ABS recommends immediate implementation of the 2004 AAPM consensus brachytherapy dosimetry datasets and no changes to 125 I and 103 Pd dose prescriptions at this time. Conclusions - Radiation oncologists should continue to prescribe mono-therapy doses of 145 Gy and 125 Gy for 125 I and 105 Pd, respectively, and standard boost doses of 100-110 Gy and 90-100 Gy for 125 I and 103 Pd, respectively. (authors)

Hormonal Replacement in Hypopituitarism in Adults: An Endocrine Society Clinical Practice Guideline.

Science.gov (United States)

Fleseriu, Maria; Hashim, Ibrahim A; Karavitaki, Niki; Melmed, Shlomo; Murad, M Hassan; Salvatori, Roberto; Samuels, Mary H

2016-11-01

To formulate clinical practice guidelines for hormonal replacement in hypopituitarism in adults. The participants include an Endocrine Society-appointed Task Force of six experts, a methodologist, and a medical writer. The American Association for Clinical Chemistry, the Pituitary Society, and the European Society of Endocrinology co-sponsored this guideline. The Task Force developed this evidence-based guideline using the Grading of Recommendations, Assessment, Development, and Evaluation system to describe the strength of recommendations and the quality of evidence. The Task Force commissioned two systematic reviews and used the best available evidence from other published systematic reviews and individual studies. One group meeting, several conference calls, and e-mail communications enabled consensus. Committees and members of the Endocrine Society, the American Association for Clinical Chemistry, the Pituitary Society, and the European Society of Endocrinology reviewed and commented on preliminary drafts of these guidelines. Using an evidence-based approach, this guideline addresses important clinical issues regarding the evaluation and management of hypopituitarism in adults, including appropriate biochemical assessments, specific therapeutic decisions to decrease the risk of co-morbidities due to hormonal over-replacement or under-replacement, and managing hypopituitarism during pregnancy, pituitary surgery, and other types of surgeries.

White Racist Ideology and the Myth of a Postracial Society

Science.gov (United States)

Colin, Scipio A. J., III

2010-01-01

When America's so-called postracial society is not viewed and assessed through the prism of white racism, the authentic lived realities of people of color become quite clear. There will be some who will reject the use of the term "white racism," but the facts are that "(1) racism permeates the roots of American society and is reflected in all its…

The American Society for Radiation Oncology's 2015 Core Physics Curriculum for Radiation Oncology Residents

Energy Technology Data Exchange (ETDEWEB)

Burmeister, Jay, E-mail: burmeist@karmanos.org [Department of Oncology, Karmanos Cancer Center/Wayne State University, Detroit, Michigan (United States); Chen, Zhe [Department of Therapeutic Radiology, Yale University, New Haven, Connecticut (United States); Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Dieterich, Sonja [Department of Radiation Oncology, University of California – Davis, Sacramento, California (United States); Doemer, Anthony [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Dominello, Michael M. [Department of Oncology, Karmanos Cancer Center/Wayne State University, Detroit, Michigan (United States); Howell, Rebecca M. [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); McDermott, Patrick [Department of Radiation Oncology, Beaumont Health, Royal Oak, Michigan (United States); Nalichowski, Adrian [Karmanos Cancer Center, Detroit, Michigan (United States); Prisciandaro, Joann [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Ritter, Tim [VA Ann Arbor Healthcare and the University of Michigan, Ann Arbor, Michigan (United States); Smith, Chadd [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Schreiber, Eric [Department of Radiation Oncology, University of North Carolina, Chapel Hill, North Carolina (United States); Shafman, Timothy [21st Century Oncology, Fort Myers, Florida (United States); Sutlief, Steven [Department of Radiation Oncology, University of California – San Diego, La Jolla, California (United States); Xiao, Ying [Department of Radiation Oncology, Thomas Jefferson University, Philadelphia, Pennsylvania (United States)

2016-07-15

Purpose: The American Society for Radiation Oncology (ASTRO) Physics Core Curriculum Subcommittee (PCCSC) has updated the recommended physics curriculum for radiation oncology resident education to improve consistency in teaching, intensity, and subject matter. Methods and Materials: The ASTRO PCCSC is composed of physicists and physicians involved in radiation oncology residency education. The PCCSC updated existing sections within the curriculum, created new sections, and attempted to provide additional clinical context to the curricular material through creation of practical clinical experiences. Finally, we reviewed the American Board of Radiology (ABR) blueprint of examination topics for correlation with this curriculum. Results: The new curriculum represents 56 hours of resident physics didactic education, including a 4-hour initial orientation. The committee recommends completion of this curriculum at least twice to assure both timely presentation of material and re-emphasis after clinical experience. In addition, practical clinical physics and treatment planning modules were created as a supplement to the didactic training. Major changes to the curriculum include addition of Fundamental Physics, Stereotactic Radiosurgery/Stereotactic Body Radiation Therapy, and Safety and Incidents sections, and elimination of the Radiopharmaceutical Physics and Dosimetry and Hyperthermia sections. Simulation and Treatment Verification and optional Research and Development in Radiation Oncology sections were also added. A feedback loop was established with the ABR to help assure that the physics component of the ABR radiation oncology initial certification examination remains consistent with this curriculum. Conclusions: The ASTRO physics core curriculum for radiation oncology residents has been updated in an effort to identify the most important physics topics for preparing residents for careers in radiation oncology, to reflect changes in technology and practice since

Defining New Roles for Scientific Professional Organizations in Society?

Science.gov (United States)

Robock, A.; Byrne, J.

2007-12-01

The obfuscation of authentic science information in North America has reached epidemic proportions. The global warming debate is a classic example - there are a virtual unanimity and overwhelming evidence from scientific community that the Earth is warming rapidly and humans are an important cause, but there is confusion in the media and the public, partly as a result of disinformation campaigns by greenhouse gas polluters. Should the role of scientists in informing the public change in response to this? What should be the role of scientific societies, such as the American Geophysical Union, the American Meteorological Society, or the American Association for the Advancement of Science? Should we continue doing what we are doing, or be more proactive in using new technology to educate the public on important scientific issues? Should we devote resources to television advertisements? Should we support ads in the print media? This talk will discuss the pros and cons of individual and group actions in making the case in public for science, and suggest some new directions.

Conflict of interest and professional medical associations: the North American Spine Society experience.

Science.gov (United States)

Schofferman, Jerome A; Eskay-Auerbach, Marjorie L; Sawyer, Laura S; Herring, Stanley A; Arnold, Paul M; Muehlbauer, Eric J

2013-08-01

Recently the financial relationships between industry and professional medical associations have come under increased scrutiny because of the concern that industry ties may create real or perceived conflicts of interest. Professional medical associations pursue public advocacy as well as promote medical education, develop clinical practice guidelines, fund research, and regulate professional conduct. Therefore, the conflicts of interest of a professional medical association and its leadership can have more far-reaching effects on patient care than those of an individual physician. Few if any professional medical associations have reported their experience with implementing strict divestment and disclosure policies, and among the policies that have been issued, there is little uniformity. We describe the experience of the North American Spine Society (NASS) in implementing comprehensive conflicts of interest policies. A special feature article. We discuss financial conflicts of interest as they apply to professional medical associations rather than to individual physicians. We describe the current policies of disclosure and divestment adopted by the NASS and how these policies have evolved, been refined, and have had no detrimental impact on membership, attendance at annual meetings, finances, or leadership recruitment. No funding was received for this work. The authors report no potential conflict-of-interest-associated biases in the text. The NASS has shown that a professional medical association can manage its financial relationships with industry in a manner that minimizes influence and bias. The NASS experience can provide a template for other professional medical associations to help manage their own possible conflicts of interest issues. Copyright © 2013 Elsevier Inc. All rights reserved.

The american brachytherapy society recommendations for permanent prostate brachytherapy postimplant dosimetric analysis

International Nuclear Information System (INIS)

Nag, Subir; Bice, William; Wyngaert, Keith de; Prestidge, Bradley; Stock, Richard; Yu Yan

2000-01-01

Purpose: The purpose of this report is to establish guidelines for postimplant dosimetric analysis of permanent prostate brachytherapy. Methods: Members of the American Brachytherapy Society (ABS) with expertise in prostate dosimetry evaluation performed a literature review and supplemented with their clinical experience formulated guidelines for performing and analyzing postimplant dosimetry of permanent prostate brachytherapy. Results: The ABS recommends that postimplant dosimetry should be performed on all patients undergoing permanent prostate brachytherapy for optimal patient care. At present, computed tomography (CT)-based dosimetry is recommended, based on availability cost and the ability to image the prostate as well as the seeds. Additional plane radiographs should be obtained to verify the seed count. Until the ideal postoperative interval for CT scanning has been determined, each center should perform dosimetric evaluation of prostate implants at a consistent postoperative interval. This interval should be reported. Isodose displays should be obtained at 50%, 80%, 90%, 100%, 150%, and 200% of the prescription dose and displayed on multiple cross-sectional images of the prostate. A dose-volume histogram (DVH) of the prostate should be performed and the D 90 (dose to 90% of the prostate gland) reported by all centers. Additionally, the D 80, D 100, the fractional V 80, V 90, V 100, V 150, and V 200, (i.e., the percentage of prostate volume receiving 80%, 90%, 100%, 150%, and 200% of the prescribed dose, respectively), the rectal, and urethral doses should be reported and ultimately correlated with clinical outcome in the research environment. On-line real-time dosimetry, the effects of dose heterogeneity, and the effects of tissue heterogeneity need further investigation. Conclusion: It is essential that postimplant dosimetry should be performed on all patients undergoing permanent prostate brachytherapy. Guidelines were established for the performance

Official Program and Abstracts of the 15. Meeting of the Latin-American Association of Biology and Nuclear Medicine Societies (ALASBIMN 97); Iberoamerican Congress of Nuclear Medicine

International Nuclear Information System (INIS)

1997-01-01

This issue contains 117 abstracts of lectures and poster sessions of the 15th Meeting of the Latin-American Association of Biology and Nuclear Medicine Societies (ALASBIMN 97) and Iberoamerican Congress of Nuclear Medicine, held in Lima, Peru, from 26 to 30 October 1997. The key subjects addressed are nuclear medicine and diagnostic techniques on brain, liver, lungs, heart, osteo-articular, cardiology, oncology, endocrinology, radiopharmaceuticals, medical physics, SPECT and their applications in diagnostic medicine. (APC)

Cancer statistics for African Americans, 2013.

Science.gov (United States)

DeSantis, Carol; Naishadham, Deepa; Jemal, Ahmedin

2013-05-01

In this article, the American Cancer Society estimates the number of new cancer cases and deaths for African Americans and compiles the most recent data on cancer incidence, mortality, survival, and screening prevalence based upon incidence data from the National Cancer Institute, the Centers for Disease Control and Prevention, and the North American Association of Central Cancer Registries and mortality data from the National Center for Health Statistics. It is estimated that 176,620 new cases of cancer and 64,880 deaths will occur among African Americans in 2013. From 2000 to 2009, the overall cancer death rate among males declined faster among African Americans than whites (2.4% vs 1.7% per year), but among females, the rate of decline was similar (1.5% vs 1.4% per year, respectively). The decrease in cancer death rates among African American males was the largest of any racial or ethnic group. The reduction in overall cancer death rates since 1990 in men and 1991 in women translates to the avoidance of nearly 200,000 deaths from cancer among African Americans. Five-year relative survival is lower for African Americans than whites for most cancers at each stage of diagnosis. The extent to which these disparities reflect unequal access to health care versus other factors remains an active area of research. Overall, progress in reducing cancer death rates has been made, although more can and should be done to accelerate this progress through ensuring equitable access to cancer prevention, early detection, and state-of-the-art treatments. Copyright © 2013 American Cancer Society, Inc.

Powder metallurgical high performance materials. Proceedings. Volume 1: high performance P/M metals

International Nuclear Information System (INIS)

Kneringer, G.; Roedhammer, P.; Wildner, H.

2001-01-01

The proceedings of this sequence of seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15th Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

Powder metallurgical high performance materials. Proceedings. Volume 1: high performance P/M metals

Energy Technology Data Exchange (ETDEWEB)

Kneringer, G; Roedhammer, P; Wildner, H [eds.

2001-07-01

The proceedings of this sequence of seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15th Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

American Indian Education Opportunities Program. Supplement 9

Science.gov (United States)

Molin, Paulette F.

1997-01-01

Activities of the American Indian Educational Opportunities Program (AIEOP) at Hampton University for this reporting period included the establishment of a student chapter of the American Indian Science & Engineering Society (AISES), a move to new office space, hosting events on campus for visiting students from the American Indian Education Program of Oxon Hill, Maryland and Onondaga Community College in Syracuse, New York, collaboration with the Multicultural Leadership Team at NASA Langley Research Center for a Native American elder to serve as a speaker, participation in Native American conferences and other events, and continuing efforts to recruit and retain American Indian students.

Readings on American Society. The Audio-Lingual Literary Series II.

Science.gov (United States)

Imamura, Shigeo; Ney, James W.

This text contains 11 lessons based on an adaptation of the 1964 essay "Automation: Road to Lifetime Jobs" by A.H. Raskin and 14 lessons based on an adaptation of John Fischer's 1948 essay "Unwritten Rules of American Politics." The format of the book and the lessons is the same as that of the other volumes of "The Audio-Lingual Literary Series."…

Shielding Gas and Heat Input Effects on the Mechanical and Metallurgical Characterization of Gas Metal Arc Welding of Super Martensitic Stainless Steel (12Cr5Ni2Mo) Joints

Science.gov (United States)

Prabakaran, T.; Prabhakar, M.; Sathiya, P.

This paper deals with the effects of shielding gas mixtures (100% CO2, 100% Ar and 80 % Ar + 20% CO2) and heat input (3.00, 3.65 and 4.33kJ/mm) on the mechanical and metallurgical characteristics of AISI 410S (American Iron and Steel Institute) super martensitic stainless steel (SMSS) by gas metal arc welding (GMAW) process. AISI 410S SMSS with 1.2mm diameter of a 410 filler wire was used in this study. A detailed microstructural analysis of the weld region as well as the mechanical properties (impact, microhardness and tensile tests at room temperature and 800∘C) was carried out. The tensile and impact fracture surfaces were further analyzed through scanning electron microscope (SEM). 100% Ar shielded welds have a higher amount of δ ferrite content and due to this fact the tensile strength of the joints is superior to the other two shielded welds.

American Society for Radiation Oncology (ASTRO) 2012 Workforce Study: The Radiation Oncologists' and Residents' Perspectives

International Nuclear Information System (INIS)

Pohar, Surjeet; Fung, Claire Y.; Hopkins, Shane; Miller, Robert; Azawi, Samar; Arnone, Anna; Patton, Caroline; Olsen, Christine

2013-01-01

Purpose: The American Society for Radiation Oncology (ASTRO) conducted the 2012 Radiation Oncology Workforce Survey to obtain an up-to-date picture of the workforce, assess its needs and concerns, and identify quality and safety improvement opportunities. The results pertaining to radiation oncologists (ROs) and residents (RORs) are presented here. Methods: The ASTRO Workforce Subcommittee, in collaboration with allied radiation oncology professional societies, conducted a survey study in early 2012. An online survey questionnaire was sent to all segments of the radiation oncology workforce. Respondents who were actively working were included in the analysis. This manuscript describes the data for ROs and RORs. Results: A total of 3618 ROs and 568 RORs were surveyed. The response rate for both groups was 29%, with 1047 RO and 165 ROR responses. Among ROs, the 2 most common racial groups were white (80%) and Asian (15%), and the male-to-female ratio was 2.85 (74% male). The median age of ROs was 51. ROs averaged 253.4 new patient consults in a year and 22.9 on-treatment patients. More than 86% of ROs reported being satisfied or very satisfied overall with their career. Close to half of ROs reported having burnout feelings. There was a trend toward more frequent burnout feelings with increasing numbers of new patient consults. ROs' top concerns were related to documentation, reimbursement, and patients' health insurance coverage. Ninety-five percent of ROs felt confident when implementing new technology. Fifty-one percent of ROs thought that the supply of ROs was balanced with demand, and 33% perceived an oversupply. Conclusions: This study provides a current snapshot of the 2012 radiation oncology physician workforce. There was a predominance of whites and men. Job satisfaction level was high. However a substantial fraction of ROs reported burnout feelings. Perceptions about supply and demand balance were mixed. ROs top concerns reflect areas of attention for the

Manganese Ores from South Sulawesi: Their Potential Uses as Raw Materials for Metallurgical Industry

Directory of Open Access Journals (Sweden)

Sufriadin Sufriadin

2017-03-01

Full Text Available Characterization of manganese ores from Barru and Bone regencies of South Sulawesi has been conducted with the aim at clarification of their mineralogical and chemical composition for their potential uses as the raw materials for metallurgical industry. Mineralogical properties of the ores analyzed by means of optical microscopy and X-ray diffractometry (XRD show that samples from Barru consist mainly of rhodochrosite (MnCO3 with less cryptomelane, groutite, bixbyite, and todorokite. Goethite, calcite and small amount of quartz present as impurities. Manganese ore samples from Bone are predominantly composed of pyrolusite (MnO2 with subordinate ramsdellite and hollandite. Barite, quartz, hematite and clay are present as gangue minerals. Chemical compositions determined by using XRF method revealed that Barru samples contain higher in MnO (average is 40.07 wt% than the Bone samples (average is 34.36 wt%. Similarly, Fe2O3 and CaO are also higher in Barru than those of the Bone samples. In contrast, concentrations of SiO2 and total alkali (K2O + Na2O are lower in the Barru samples. The average P2O5 content of samples in both areas is low (<0.2 wt%. Relatively higher grade of Fe2O3 in the Barru ore implies that it has potential application for ferromanganese production; whereas the elevated SiO2 content of the Bone ore is a good indication for silicomanganese manufacture. However, both ores may not favorable to be directly used as raw materials in metallurgical uses. Prior to be used, the ores should be treated by applying physical beneficiation in order to reduce deleterious elements.

Economic statistics for the mining and metallurgical industries: 1990. Statistique economique des industries extractives et metallurgiques annee 1990

Energy Technology Data Exchange (ETDEWEB)

Rzonzef, L.

1991-01-01

Provides economic statistics for the Belgian mining and metallurgical industries in 1990. The review is divided into 4 parts: the extractive industries (including an analysis of the coal market and mines, quarries and associated industries); coke and briquette making; metallurgy (i.e. blast furnaces, steel making, rolling mills and manpower and materials consumption in the steel industry); and the extraction of sand from the Belgian continental shelf. 17 tabs.

Attitudes Regarding Labial Hypertrophy and Labiaplasty: A Survey of Members of the Society of Gynecologic Surgeons and the North American Society for Pediatric and Adolescent Gynecology.

Science.gov (United States)

Westermann, Lauren B; Oakley, Susan H; Mazloomdoost, Donna; Crisp, Catrina C; Kleeman, Steven D; Benbouajili, Janine M; Pauls, Rachel N

2016-01-01

The aim of this study was to describe gynecologists' attitudes toward labial hypertrophy and explore possible differences among providers for pediatric/adolescent patients. This was an institutional review board-approved, cross-sectional survey of physician attendees at 2 national meetings in 2014: the Society of Gynecologic Surgeons (SGS) and the North American Society for Pediatric and Adolescent Gynecology (NASPAG). The survey was designed to query demographics and impressions regarding labial hypertrophy and labiaplasty. Three hundred sixty-five surveys were completed (response rate, 50%); 268 were analyzed: 55% from SGS and 45% from NASPAG. Most were older than 41 years; 170 (63%) were women, and 93 (35%) were men. More men than women attended SGS (60%); however, women were the majority at NASPAG (94%).Most respondents believed labial hypertrophy to be infrequently reported and "a condition that impacts body image." Common symptoms were "discomfort with exercise" and "dissatisfaction with appearance naked." The majority felt this to impact sexual function "in some cases," citing "self-esteem" and "comfort" most often.Concerning therapies for provided labial hypertrophy, 83% of practitioners provide reassurance, whereas 77% would offer labiaplasty. Expertise with labiaplasty varied; 28% felt "very comfortable," and 11% felt "very uncomfortable."Provider preference for treatment differed based on meeting attendance. After logistic regression controlling for sex and age, attendance at SGS remained associated with offering labiaplasty (P = 0.001; odds ratio, 4.1; 95% confidence interval, 1.8-9.3), whereas NASPAG attendance was associated with providing reassurance (P = 0.008; odds ratio, 0.30; 95% confidence interval, 0.10-0.70). Although the majority surveyed view labial hypertrophy to be bothersome, gynecologists caring for our youngest patients are more likely to provide reassurance. Consensus guidelines are needed to aid practitioners in appropriate management

75 FR 64611 - Italian American Heritage and Culture Month, 2010

Science.gov (United States)

2010-10-19

.... As we honor the long history and vast contributions of Italian Americans, let us recommit to... society and steer the course of our history. During Italian American Heritage and Culture Month, we... Culture Month. I call upon all Americans to learn more about the history of Italian Americans, and to...