Variation of heavy metal levels in the tissues of Periophthalmus ...

African Journals Online (AJOL)

Variation of heavy metal levels in the tissues of Periophthalmus papillio from the mangrove swamps of the Bukuma oilfield, Rivers State. ... Generally elevated metal levels in both tissues were recorded at the stations with wellheads, implicating oil-related activities as the main source of contamination. However, the levels in ...

Physico-chemical characteristics and Heavy metal levels in Drinking ...

African Journals Online (AJOL)

Physico-chemical characteristics and Heavy metal levels in Drinking Water ... composition was analysed using X-ray Fluorescence spectroscopy. Majority of the water samples had neutral pH (6.80 – 7.20) few were slightly alkaline and one was acidic. ... Heavy metals (copper and lead), rare earth metals (gallium, rubidium, ...

Separation of palladium from high-level waste using metal ferro cyanide loaded resins

International Nuclear Information System (INIS)

Valsala, T.P.; Joseph, Annie; Yeotikar, R.G.

2005-01-01

High-level waste (HLW) is generated during reprocessing of spent fuel. HLW contains corrosion products, unextracted actinides, process chemicals and fission products. A recent trend is there to consider waste as a source of wealth. Among the fission products separation and recovery of platinum group metals have gained great attention. HLW is a good source of palladium of the platinum group metal. The present study shows the feasibility of ion exchange separation of Pd from HLW. (author)

Distributions and natural levels of related metals in a trophic pathway

International Nuclear Information System (INIS)

Lemons, J.D.

1976-06-01

The first objective was to test the hypothesis that metal distributions and trends in organisms are, in part, a function of metal positions in the periodic table in unpolluted ecosystems. The data have shown that large soil crustal abundance differences of related elements (e.g. alkali metals) are proportionately approximated in higher organisms. Concentration factors for related nutritious and nonessential and toxic metals were determined along a trophic pathway. When the concentration factors were reported as the concentration of a particular metal by itself, all metal concentrations increased along the trophic pathway. The second objective of this study was to test the hypothesis that distributions and natural levels of chemically related nonessential and toxic metals can better be known when the metals are reported as a ratio, in ash, of the nonessential or toxic metal to its chemically related nutritious metal (e.g. strontium/calcium) as the metals are transferred through trophic pathways. The data have shown that when this method of reporting metal abundances in trophic levels is used, nonessential and toxic metals are discriminated against, relative to their chemically related nutritious metal, as the metals are transferred through the trophic pathway levels. The third objective was designed to test the hypothesis that surface deposition of toxic metals upon plants influences the trends of metal abundances through trophic pathways. This study indicates that metal pollution in the form of deposition upon plant surfaces bypasses the discrimination mechanisms in plants, and consequently elevates the total body burden in herbivores. It is likely that there is no herbivore defense for this type of metal exposure, because herbivores have probably come to rely, in part, upon the discriminatory mechanism of plants throughout the course of evolutionary history to keep toxic metal burdens low

Nanorods of a new metal-biomolecule coordination polymer showing novel bidirectional electrocatalytic activity and excellent performance in electrochemical sensing.

Science.gov (United States)

Yang, Jiao; Zhou, Bo; Yao, Jie; Jiang, Xiao-Qing

2015-05-15

Metal organic coordination polymers (CPs), as most attractive multifunctional materials, have been studied extensively in many fields. However, metal-biomolecule CPs and CPs' electrochemical properties and applications were studied much less. We focus on this topic aiming at electrochemical biosensors with excellent performance and high biocompatibility. A new nanoscaled metal-biomolecule CP, Mn-tyr, containing manganese and tyrosine, was synthesized hydrothermally and characterized by various techniques, including XRD, TEM, EDS, EDX mapping, elemental analysis, XPS, and IR. Electrode modified with Mn-tyr showed novel bidirectional electrocatalytic ability toward both reduction and oxidation of H2O2, which might be due to Mn. With the assistance of CNTs, the sensing performance of Mn-tyr/CNTs/GCE was improved to a much higher level, with high sensitivity of 543 mA mol(-1) L cm(-2) in linear range of 1.00×10(-6)-1.02×10(-4) mol L(-1), and detection limit of 3.8×10(-7) mol L(-1). Mn-tyr/CNTs/GCE also showed fast response, high selectivity, high steadiness and reproducibility. The excellent performance implies that the metal-biomolecule CPs are promising candidates for using in enzyme-free electrochemical biosensing. Copyright © 2014 Elsevier B.V. All rights reserved.

trace metal level of human blood from dareta village, anka, nigeria

African Journals Online (AJOL)

BARTH EKWUEME

either (or both) as essential or toxic or show a high ... Death from Lead poisoning has occurred in children at blood Lead levels of 1.25 mg/L or ... intake of Lead: adults, 3 mg per person or 50 µg/kg ... U.U. Udiba, National Research Institute for Chemical Technology, P.M.B 1052, Zaria, .... workers exposed to this metal.

Heavy metal levels in commonly used traditional medicinal plants

International Nuclear Information System (INIS)

Said, S.; Zahir, E.

2010-01-01

In the present study a survey of 24 commonly used medicinal plants of Indian subcontinent origin was carried out to evaluate their levels of heavy metals by electrothermal atomic absorption spectroscopy. The results showed that the highest mean value for Cd (12.06 mu g.g/sup -1/), Cr (24.50 mu g.g/sup -1/), Cu (15.27 mu g.g/sup -1/), Pb (1.30 mu g.g/sup -1/), Fe (885.60 mu g.g/sup -1/), Mn (90.60 mu g.g/sup -1/), Ni (9.99 mu g.g/sup -1/) and Zn (77.15 mu g.g/sup -1/) were found in Lawsonia inermis, Murraya koenigii, Mentha spicata, Beta vulgaris Linn, Mentha spicata, Lagenaria sicerana standl, Lawsonia inermis, Emblica officinalis, respectively. The mean and maximum levels of Cd in plant samples were found higher than the recommended values of the Joint Expert Committee on Food Additives of the Food and Agriculture Organization of the United Nations and the World Health Organization and may constitute a health hazard for consumers. All other heavy metals in medicinal plants were found below the recommended tolerable limits. (author)

Monitoring of heavy metal levels in the major rivers and in residents' blood in Zhenjiang City, China, and assessment of heavy metal elimination via urine and sweat in humans.

Science.gov (United States)

Sheng, Jianguo; Qiu, Wenhui; Xu, Bentuo; Xu, Hui; Tang, Chong

2016-06-01

The coastal areas of China face great challenges, owing to heavy metal contamination caused by rapid industrialization and urbanization. To our knowledge, this study is the first report of the levels of heavy metals in the major rivers of Zhenjiang, one of the most important cities of the Yangtze River Delta in China. In addition, we measured heavy metal levels in the blood of 76 residents of Zhenjiang. The results suggest that the presence of heavy metals in the blood may threaten human health and the distribution appeared to correspond to most highly populated areas and/or areas with high traffic. We also found that the concentration of heavy metals in human blood showed an accumulation effect with increase in age. Moreover, the levels of most heavy metals were lower in participants who regularly exercised than in those who did not. We studied heavy metal levels in the urine and sweat of another 17 volunteers to monitor the elimination of bioaccumulated heavy metal. Heavy metals were found in the urine and sweat of all the 17 participants and were more concentrated in sweat. Induced micturition and sweating appear to be potential methods for the elimination of heavy metals from the human body.

Assessment of Metal Levels In Some Plants From Giresun

Directory of Open Access Journals (Sweden)

Mustafa Türkmen

2017-09-01

Full Text Available The study performed the metal bioaccumulations in seven plant species from Giresun city. A total 140 specimens were collected from two stations (Station A; 40° 48’ N, 38° 19’ E, Station B; 50° 54’ N, 38° 26’ E from March 2012 to September 2012. Plant samples were dissected, homogenized and dried at 105°C for 24 hours. An approximately 0.25 g sample of each plant leaf was digested with Cem Mars 5 microwave oven. After cooling, the residue was transferred to 50 ml volumetric flasks and diluted to level with deionized water. Before analysis, the samples were filtered through a 0.45 µm filter. All samples were analyzed (as mg kg-1 dry weight three times for cobalt chromium, copper, iron, manganese, nickel, lead and zinc by ICP-MS. A logarithmic transformation was done on the data to improve normality. One way ANOVA and Duncan’s multiple range tests were performed to test the differences among metal levels of species. Concentrations of metals in the examined species ranged from 0.05 to 1.80 for cobalt, 0.14 to 3.24 for chromium, 2.33 to 28.1 for copper, 38.9 to 533 for iron, 1.81 to 64.6 for manganese, 0.81 to 18.9 for nickel, 0.32 to 6.22 for lead and 14.3 to 536 for zinc, in mg kg-1 respectively. Iron had the highest concentrations in all examined plant species in both stations except Zn for Sambucus ebulus in Station B. Second highest metal was zinc after iron. On the other hand, cobalt had lowest levels than other metals. The differences among metal levels in plant species were statistically significant. Maximum Provisional Tolerable Weekly Intakes (PTWI in edible plant species were calculated.

Maternal blood metal levels and fetal markers of metabolic function

Energy Technology Data Exchange (ETDEWEB)

Ashley-Martin, Jillian [Perinatal Epidemiology Research Unit, Dalhousie University, Halifax, Nova Scotia (Canada); Dodds, Linda, E-mail: l.dodds@dal.ca [Perinatal Epidemiology Research Unit, Dalhousie University, Halifax, Nova Scotia (Canada); Arbuckle, Tye E. [Health Canada, Ottawa (Canada); Ettinger, Adrienne S. [Yale University, New Haven, CT (United States); Shapiro, Gabriel D. [University of Montreal, Montreal, Quebec (Canada); CHU Sainte-Justine Research Centre, Montreal, Quebec (Canada); Fisher, Mandy [Health Canada, Ottawa (Canada); Taback, Shayne [University of Manitoba, Winnipeg, Manitoba (Canada); Bouchard, Maryse F. [University of Montreal, Montreal, Quebec (Canada); Monnier, Patricia [McGill University, Montreal, Quebec (Canada); Dallaire, Renee [Laval University, Quebec City, Quebec (Canada); Fraser, William D. [University of Montreal, Montreal, Quebec (Canada); CHU Sainte-Justine Research Centre, Montreal, Quebec (Canada)

2015-01-15

Exposure to metals commonly found in the environment has been hypothesized to be associated with measures of fetal growth but the epidemiological literature is limited. The Maternal–Infant Research on Environmental Chemicals (MIREC) study recruited 2001 women during the first trimester of pregnancy from 10 Canadian sites. Our objective was to assess the association between prenatal exposure to metals (lead, arsenic, cadmium, and mercury) and fetal metabolic function. Average maternal metal concentrations in 1st and 3rd trimester blood samples were used to represent prenatal metals exposure. Leptin and adiponectin were measured in 1363 cord blood samples and served as markers of fetal metabolic function. Polytomous logistic regression models were used to estimate odds ratios (OR) and 95% confidence intervals (CI) for the association between metals and both high (≥90%) and low (≤10%) fetal adiponectin and leptin levels. Leptin levels were significantly higher in female infants compared to males. A significant relationship between maternal blood cadmium and odds of high leptin was observed among males but not females in adjusted models. When adjusting for birth weight z-score, lead was associated with an increased odd of high leptin. No other significant associations were found at the top or bottom 10th percentile in either leptin or adiponectin models. This study supports the proposition that maternal levels of cadmium influence cord blood adipokine levels in a sex-dependent manner. Further investigation is required to confirm these findings and to determine how such findings at birth will translate into childhood anthropometric measures. - Highlights: • We determined relationships between maternal metal levels and cord blood adipokines. • Cord blood leptin levels were higher among female than male infants. • Maternal cadmium was associated with elevated leptin in male, not female infants. • No significant associations were observed between metals and

Maternal blood metal levels and fetal markers of metabolic function

International Nuclear Information System (INIS)

Ashley-Martin, Jillian; Dodds, Linda; Arbuckle, Tye E.; Ettinger, Adrienne S.; Shapiro, Gabriel D.; Fisher, Mandy; Taback, Shayne; Bouchard, Maryse F.; Monnier, Patricia; Dallaire, Renee; Fraser, William D.

2015-01-01

Exposure to metals commonly found in the environment has been hypothesized to be associated with measures of fetal growth but the epidemiological literature is limited. The Maternal–Infant Research on Environmental Chemicals (MIREC) study recruited 2001 women during the first trimester of pregnancy from 10 Canadian sites. Our objective was to assess the association between prenatal exposure to metals (lead, arsenic, cadmium, and mercury) and fetal metabolic function. Average maternal metal concentrations in 1st and 3rd trimester blood samples were used to represent prenatal metals exposure. Leptin and adiponectin were measured in 1363 cord blood samples and served as markers of fetal metabolic function. Polytomous logistic regression models were used to estimate odds ratios (OR) and 95% confidence intervals (CI) for the association between metals and both high (≥90%) and low (≤10%) fetal adiponectin and leptin levels. Leptin levels were significantly higher in female infants compared to males. A significant relationship between maternal blood cadmium and odds of high leptin was observed among males but not females in adjusted models. When adjusting for birth weight z-score, lead was associated with an increased odd of high leptin. No other significant associations were found at the top or bottom 10th percentile in either leptin or adiponectin models. This study supports the proposition that maternal levels of cadmium influence cord blood adipokine levels in a sex-dependent manner. Further investigation is required to confirm these findings and to determine how such findings at birth will translate into childhood anthropometric measures. - Highlights: • We determined relationships between maternal metal levels and cord blood adipokines. • Cord blood leptin levels were higher among female than male infants. • Maternal cadmium was associated with elevated leptin in male, not female infants. • No significant associations were observed between metals and

Levels and occupational health risk assessment of trace metals in ...

African Journals Online (AJOL)

The levels of trace metals (Pb, Cu, Ni and Cd) were determined in soils from a major automobile repair workshop located in Uyo, Akwa Ibom State, Nigeria. This was carried out to evaluate the potential occupational risk to operators working in and around the site. The mean of trace metal levels were: lead (14.52 mg/kg); ...

Levels of essential and non-essential metals in Rhamnus prinoides ...

African Journals Online (AJOL)

The objective of this study was to assess the levels of essential and toxic metals in leaf and stem of Rhamnus prinoides which are used for bitterness of local alcoholic beverages in Ethiopia and as traditional medicine in some African countries. Levels of essential metals (Ca, Mg, Cr, Mn, Fe, Co, Ni, Cu and Zn) and toxic ...

Sharptooth catfish shows its metal: a case study of metal contamination at two impoundments in the Olifants River, Limpopo river system, South Africa.

Science.gov (United States)

Jooste, Antoinette; Marr, Sean M; Addo-Bediako, Abraham; Luus-Powell, Wilmien J

2015-02-01

Clarias gariepinus is increasing in importance as a global aquaculture species with a 100 fold increase in production over the past decade but this species still remains one of the most important wild harvested freshwater food fish throughout rural Africa. However, this species has been shown to accumulate metals from contaminated inland waters. In this paper, the metal concentrations in muscle tissue of C. gariepinus from two main-stem impoundments in the Olifants River, Limpopo Basin, were measured and a desktop risk assessment based on the US-EPA methodology completed to evaluate whether long-term consumption of C. gariepinus from these impoundments may pose a health risk to rural communities. Our results show that metals are accumulating in the muscle tissue of C. gariepinus and have appeared to have increased in the last two decades. Risk assessment generated Hazard quotients (HQ) greater than 1 indicate that long term consumption of fish from these impoundments may cause adverse health impacts. We found that lead (HQ=9), antimony (HQ=14), cobalt (HQ=2) and chromium (HQ=1) at one impoundment and lead (HQ=2) at the other impoundment were above acceptable levels for weekly consumption of 150 g C. gariepinus muscle tissue. Copyright © 2014 Elsevier Inc. All rights reserved.

Air quality in the Kootenays: fine particulate (PM10) airborne metals and sulphur dioxide levels, 1993-1999

International Nuclear Information System (INIS)

2000-09-01

Air quality monitoring data collected in the Kootenays over a seven year period from 1993 to 1999 are summarized in an effort to inform the public about air quality in the Kootenays and to assist them in understanding air quality monitoring results. Data includes hourly (TEOM) and weekly (NAPS) data for particulate matter (PM 1 0) airborne metals (arsenic, cadmium, lead and zinc) and sulphur dioxide. Analysis of monitoring data showed that particulate matter levels remained constant in most communities, with Johnson Lake and Slocan reporting the lowest levels, while Golden had the highest values during this period. Trail-Butler Park showed a clear declining trend in PM 1 0. Airborne metals and sulphur dioxide levels have decreased in the Kootenays during the seven year period, with only occasional exceedances of both Level A and B air quality objectives in some communities. The report includes a detailed description of the sampling methodology and the analyzed results for PM 1 0, airborne metals and sulphur dioxide for 10 communities in the region. 6 refs., 1 tab., 16 figs., 1 map

Assessment of heavy metal contamination, levels in topsoil at selected auto-workshops in Accra, Ghana

International Nuclear Information System (INIS)

Ziblim, M. Y.

2015-07-01

The research was conducted to assess the levels of contamination of heavy metals in the topsoil at selected auto-workshops in Accra to determine the anthropogenic and crustal contributions and the human heath risk associated with them. Soil samples collected from four auto-workshops were analysed using Atomic Absorption Spectrometer. Eleven (11) elements: Co, Fe, Cu, Mn, Cr, As, Hg, Zn, Pb, Ni, and Cd were identified in each sample collected from the auto-workshops. Pollution indices; contamintion factor (Cf) index of geoaccumulation (Igeo) and pollution load index (PLI) were used to assess the contamination levels. It revealed the extent of contamination at the auto-workshops for most of the elements which range from low to considerate contamintion. Lead (Pb) recorded the greatest contamination levels at the auto-electrical location. The results from the index of geoccumulation showed no pollution to highly pollution indicting high variations of pollution levels at different locations. The results of the PLI in almost all locations ranged from moderately to extremely polluted. Noncancer effect on children and adults due to exposure to the topsoil were also estimated with some selected metal elements. The hazard quotient (HQ) evaluation, showed ingestion to be the route of exposure to soil dust that results in a higher risk for heavy metals, followed by dermal contact. The effect due to inhalation of resuspended dust particles through the mouth and nose is relatively low. It was observed that, the auto-workshops are generally polluted with heavy metals and therefore posing ill-health effect to the humans and the environment. (au)

The spatial characteristics and pollution levels of metals in urban street dust of Beijing, China

International Nuclear Information System (INIS)

Tang, Rongli; Ma, Keming; Zhang, Yuxin; Mao, Qizheng

2013-01-01

Highlights: ·We explored the pollution characters of metals in street dust of Beijing. ·Area-source pollution and point-source pollution exist simultaneously. ·We identified the spatial autocorrelation intensities and ranges of metals. ·Metal pollution anomalies were identified by cluster and outlier analyses. ·Urban activities strongly influence the distributions of metals. - Abstract: The components and concentrations of metals in street dust are indictors of environmental pollution. To explore the pollution levels of Cd, Cr, Cu, Mn, Ni and Pb in street dust and their spatial distribution characteristics, 220 dust samples were collected in a grid pattern from urban street surfaces in Beijing. Multivariate statistics and spatial analyses were adopted to investigate the associations between metals and to identify their pollution patterns. In comparison with the soil background values, elevated metal concentrations were found, except those for Mn and Ni. The results of the geo-accumulation index (I geo ) and the potential ecological risk index (Er i ) of the metals revealed the following orders: Cd > Cu > Cr > Pb > Ni > Mn and Cd > Cu > Pb > Cr > Ni. Levels of I geo ranging from 0 to 5 were found and about 80% of the samples were below the moderately polluted level. The Er i values of single elements were within the low ecological risk level in most sampling sites. Most of the metals in the street dust of Beijing were statistically significantly correlated. It is hard to clearly identify the sources of each metal in the street dust since local environments are very complex. Cadmium, Cu, Cr, Mn and Pb showed medium spatial autocorrelations within the sampling region. Similar spatial distribution patterns were observed for Cu, Cr and Pb, and these metals had relatively high spatial variabilities and were enriched in the center of the city with several peaks scattered in the suburbs. Metal pollution anomalies were identified by using cluster and outlier analyses

Physicochemical characteristics and heavy metal levels in soil ...

African Journals Online (AJOL)

Distribution pattern of heavy metals in petrol stations, abattoirs, mechanic workshops and hospital incinerator sites were Mn > Zn > Pb > Cd, while for dumpsites Zn > Mn > Pb > Cd. Pollution index indicated that soil qualities varied between slightly contaminated to severely polluted status. This showed that the heavy metal ...

Mutual inductance appliance for measuring the level of a molten metal

International Nuclear Information System (INIS)

Zbinden, Marc.

1982-01-01

The invention concerns an appliance for measuring the level of a molten metal of the kind using the variation of the mutual inductance between two imbricated windings depending on the level of the free area of the molten metal in the range of levels taken up by the windings. It has a particularly significant use in measuring the level of liquid sodium, especially in nuclear facilities where sodium is used as coolant [fr

Physicochemical Characteristics and Levels of Some Heavy Metals ...

African Journals Online (AJOL)

Michael Horsfall

indicated a significant degree of soil contamination for Pd, Cd, Co, Cu and Zn in the soils studied showing a higher ... disposed waste. These metals which are not biodegradable are accumulated in living organisms when released into the environment. Although trace ... heavy metals in Nigerian soils if such solid waste.

Heavy metal levels and solid phase speciation in street dusts of Delhi, India

International Nuclear Information System (INIS)

Banerjee, Anju D.K.

2003-01-01

Although the street dusts of Delhi contain considerably high levels of Cr, Ni, Cu, Cd, Zn and Pb, solid phase speciation results indicate comparatively limited environmental mobility and bioavailability of Ni and Cr. - Street dust samples were collected from three different localities (industrial, heavy traffic and rural) situated in the greater Delhi area of India. The samples analyzed for Cd, Zn, Pb, Ni, Cu, and Cr indicated remarkably high levels of Cr, Ni, and Cu in the industrial area, whilst Pb and Cd did not show any discernible variations between the three localities. A multivariate statistical approach (Principal Component Analysis) was used to define the possible origin of metals in dusts. The street dusts were sequentially extracted so that the solid pools of Cd, Zn, Pb, Ni, Cu, Cr could be partitioned into five operationally defined fractions viz. exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and residual. Metal recoveries in sequential extractions were ±10% of the independently measured total metal concentrations. Cd was the only metal present appreciably (27.16%) in the exchangeable fraction and Cu was the only metal predominantly associated (44.26%) with organic fraction. Zn (45.64%) and Pb (28.26%) were present mainly in the Fe-Mn oxide fraction and the residual fraction was the most dominant solid phase pool of Cr (88.12%) and Ni (70.94%). Assuming that the mobility and bioavailability are related to the solubility of geochemical forms of the metals and decrease in order of extraction, the apparent mobility and potential metal bioavailability for these highly contaminated street dust samples is: Cd>Zn congruent with Pb>Ni>Cu>Cr

Evaluation of levels of select toxic metals in commonly used herbal ...

African Journals Online (AJOL)

Even at low concentrations or levels of exposure, toxic metals have also been reported to pose health risks to man. Aim: To ... Materials/Methods :Herbal medicines (n=8) were purchased from on-the-street vendors and evaluated for levels of five toxic metals (Lead, Nickel, Mercury, Cadmium and Arsenic).Analysis of toxic ...

Toxic metal levels in children residing in a smelting craft village in Vietnam: a pilot biomonitoring study.

Science.gov (United States)

Sanders, Alison P; Miller, Sloane K; Nguyen, Viet; Kotch, Jonathan B; Fry, Rebecca C

2014-02-04

In Vietnam, environmental pollution caused by small-scale domestic smelting of automobile batteries into lead ingot is a growing concern. The village of Nghia Lo is a smelting craft village located roughly 25 km southeast of Hanoi in the Red River Delta. Despite the concern of toxic metal exposure in the village, biomonitoring among susceptible populations, such as children, has not been previously conducted. The aim of this study was to determine the body burden of toxic metals in children residing in a smelting craft village. Twenty children from Nghia Lo, Vietnam, ages 18 months to four years were selected for capillary whole blood and toenail biomonitoring. Whole blood lead levels (BLLs) were measured using a portable lead analyzer, and toenail levels of arsenic, cadmium, chromium, lead, manganese, and mercury were analyzed with inductively coupled plasma-mass spectrometry. The findings show that all of the 20 children had detectable BLLs, and every child had levels that exceeded the Centers for Disease Control and Prevention guideline level of 5 μg/dL. Eighty percent of tested subjects had BLLs higher than 10 μg/dL. Five children (25%) had BLLs greater than 45 μg/dL, the level of recommended medical intervention. In addition to blood lead, all of the children had detectable levels of arsenic, cadmium, chromium, lead, manganese, and mercury in toenail samples. Notably, average toenail lead, manganese, and mercury levels were 157 μg/g, 7.41 μg/g, and 2.63 μg/g respectively, well above levels previously reported in children. Significant Spearman's rank correlations showed that there were relationships between blood and toenail lead levels (r = 0.65, p craft villages in Vietnam are co-exposed to toxic metals. There is an urgent need for mitigation to control metal exposure related to domestic smelting.

Low-level radioactive waste from rare metals processing facilities

International Nuclear Information System (INIS)

Eng, J.; Hendricks, D.W.; Feldman, J.; Giardina, P.A.

1980-01-01

This paper reviews the situations at the existing Teledyne Wah Chang Co., Inc. located at Albany, Oregon, and the former Carborundum Corp./Amax Specialty Metals, Inc., facilities located at Parkersburg, West Virginia, and Akron, New York, in order to show the extent of the radioactivity problem at rare metals processing facilities and the need to identify for radiological review other rare metal and rare earth processing sites

Heat indicators of oxidative stress, inflammation and metal transport show dependence of cadmium pollution history in the liver of female zebrafish.

Science.gov (United States)

Zhu, Qing-Ling; Guo, Sai-Nan; Yuan, Shuang-Shuang; Lv, Zhen-Ming; Zheng, Jia-Lang; Xia, Hu

2017-10-01

Environmental stressors such as high temperature and metal exposure may occur sequentially, simultaneously, previously in aquatic ecosystems. However, information about whether responses to high temperature depend on Cd exposure history is still unknown in fish. Zebrafish were exposed to 0 (group 1), 2.5 (group 2) and 5μg/L (group 3) cadmium (Cd) for 10 weeks, and then each group was subjected to Cd-free water maintained at 26°C and 32°C for 7days respectively. 26 indicators were used to compare differences between 26°C and 32°C in the liver of female zebrafish, including 5 biochemical indicators (activity of Cu/Zn-SOD, CAT and iNOS; LPO; MT protein), 8 molecular indicators of oxidative stress (mRNA levels of Nrf2, Cu/Zn-SOD, CAT, HSF1, HSF2, HSP70, MTF-1 and MT), 5 molecular indicators of inflammation (mRNA levels of IL-6, IL-1β, TNF-α, iNOS and NF-κB), 8 molecular indicators of metal transport (mRNA levels of, ZnT1, ZnT5, ZIP8, ZIP10, ATP7A, ATP7B and CTR1). All biochemical indicators were unchanged in group 1 and changed in group 2 and 3. Contrarily, differences were observed in almost all of molecular indicators of inflammation and metal transport in group 1, about half in group 2, and few in group 3. We also found that all molecular indicators of oxidative stress in group 2 and fewer in group 1 and 3 were significantly affected by heat. Our data indicated that heat indicators of oxidative stress, inflammation and metal transport showed dependence of previous cadmium exposure in the liver of zebrafish, emphasizing metal pollution history should be carefully considered when evaluating heat stress in fish. Copyright © 2017. Published by Elsevier B.V.

Temporal variations of heavy metals levels in Perna viridis, on the Chacopata-Bocaripo lagoon axis, Sucre State, Venezuela.

Science.gov (United States)

Pinto, Rafael; Acosta, Vanessa; Segnini, Mary Isabel; Brito, Leonor; Martínez, Gregorio

2015-02-28

Perna viridis was used as biomonitor to assess heavy metal levels in the Chacopata-Bocaripo lagoon axis, Venezuela, during rain and drought seasons. The mussels were weighed and measured. The metal concentrations were determined by atomic absorption spectrophotometry. For rain period, the order of bioavailability was: Cu>Ni>Mn>Co>Cd>Pb, and for drought: Cu>Mn>Ni>Co>Pb>Cd. The concentrations of Ni, Co, Cd and Pb showed significant differences (P<0.05) in both periods. There was higher metal accumulation during drought season, possibly related to upwelling, since it produces an increase in primary productivity, which translates more food into organisms, making metals bioavailable for mussels. Only Cu and Mn showed significant relationships between the size and metal concentration, during drought period, it may be because of the organisms need for these essential metals in different physiological processes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Prostate tissue metal levels and prostate cancer recurrence in smokers.

Science.gov (United States)

Neslund-Dudas, Christine; Kandegedara, Ashoka; Kryvenko, Oleksandr N; Gupta, Nilesh; Rogers, Craig; Rybicki, Benjamin A; Dou, Q Ping; Mitra, Bharati

2014-02-01

Although smoking is not associated with prostate cancer risk overall, smoking is associated with prostate cancer recurrence and mortality. Increased cadmium (Cd) exposure from smoking may play a role in progression of the disease. In this study, inductively coupled plasma mass spectrometry was used to determine Cd, arsenic (As), lead (Pb), and zinc (Zn) levels in formalin-fixed paraffin embedded tumor and tumor-adjacent non-neoplastic tissue of never- and ever-smokers with prostate cancer. In smokers, metal levels were also evaluated with regard to biochemical and distant recurrence of disease. Smokers (N = 25) had significantly higher Cd (median ppb, p = 0.03) and lower Zn (p = 0.002) in non-neoplastic tissue than never-smokers (N = 21). Metal levels were not significantly different in tumor tissue of smokers and non-smokers. Among smokers, Cd level did not differ by recurrence status. However, the ratio of Cd ppb to Pb ppb was significantly higher in both tumor and adjacent tissue of cases with distant recurrence when compared with cases without distant recurrence (tumor tissue Cd/Pb, 6.36 vs. 1.19, p = 0.009, adjacent non-neoplastic tissue Cd/Pb, 6.36 vs. 1.02, p = 0.038). Tissue Zn levels were also higher in smokers with distant recurrence (tumor, p = 0.039 and adjacent non-neoplastic, p = 0.028). These initial findings suggest that prostate tissue metal levels may differ in smokers with and without recurrence. If these findings are confirmed in larger studies, additional work will be needed to determine whether variations in metal levels are drivers of disease progression or are simply passengers of the disease process.

Factors Affecting the Levels of Heavy Metals in Juices Processed with Filter Aids.

Science.gov (United States)

Wang, Zhengfang; Jackson, Lauren S; Jablonski, Joseph E

2017-06-01

This study investigated factors that may contribute to the presence of arsenic and other heavy metals in apple and grape juices processed with filter aids. Different types and grades of filter aids were analyzed for arsenic, lead, and cadmium with inductively coupled plasma-tandem mass spectrometry. Potential factors affecting the transfer of heavy metals to juices during filtration treatments were evaluated. Effects of washing treatments on removal of heavy metals from filter aids were also determined. Results showed that diatomaceous earth (DE) generally contained a higher level of arsenic than perlite, whereas perlite had a higher lead content than DE. Cellulose contained the lowest level of arsenic among the surveyed filter aids. All samples of food-grade filter aids contained arsenic and lead levels that were below the U.S. Pharmacopeia and National Formulary limits of 10 ppm of total leachable arsenic and lead for food-grade DE filter aids. Two samples of arsenic-rich (>3 ppm) food-grade filter aids raised the level of arsenic in apple and grape juices during laboratory-scale filtration treatments, whereas three samples of low-arsenic (filter aids did not affect arsenic levels in filtered juices. Filtration tests with simulated juices (pH 2.9 to 4.1, Brix [°Bx] 8.2 to 18.1, total suspended solids [TSS] 0.1 to 0.5%) showed that pH or sugar content had no effect on arsenic levels of filtered juices, whereas arsenic content of filtered juice was elevated when higher amounts of filter aid were used for filtration. Authentic unfiltered apple juice (pH 3.6, °Bx 12.9, TSS 0.4%) and grape juice (pH 3.3, °Bx 16.2, TSS 0.05%) were used to verify results obtained with simulated juices. However, body feed ratio did not affect the arsenic content of filtered authentic juices. Washing treatments were effective at reducing arsenic, but not cadmium or lead, concentrations in a DE filter aid. This study identified ways to reduce the amount of arsenic transferred to juices

Levels of trace metals in soil and vegetation along major and minor ...

African Journals Online (AJOL)

... emission couple with waste dispose along the roads remain a threat. The findings in general indicate the levels of metals in soil and plant samples were within the EU limits with the exception of Cd. In addition, the high level of Cd appears to reach pollution levels and metal dynamics up the food chain is highly possible.

Multiplet splitting of x-ray photoemission spectra core levels in magnetic metals

International Nuclear Information System (INIS)

Kowalczyk, S.P.; McFeely, F.R.; Ley, L.; Shirley, D.A.

1975-01-01

The results of high resolution x-ray photoemission studies of the multiplet splitting of the 3s core levels in the 3d transition metals and the 4s, 5s and 4d core levels in the lanthanide metals are reported

Association between Serum Heavy Metals Level and Cancer ...

African Journals Online (AJOL)

2018-06-11

Jun 11, 2018 ... metals level and cancer incidence in Darbandikhan and Kalar area,. Kurdistan region ..... In males, they were lung, leukemia, lymphoma, colorectal, prostate, bladder, ... lead, mercury, and tin activate the estrogen receptor,.

Treatment and conditioning of metallic intermediate level waste

International Nuclear Information System (INIS)

Lidar, Per; Larsson, Arne; Huutoniemi, Tommi; Blank, Eva; Elfwing, Mattias

2014-01-01

In 2011 SKB started an R and D program for evaluating different disposal concepts for LL-LILW. The purpose was to develop alternative repository concepts and conditioning methods for LL-LILW and to evaluate and compare them from a range of parameters. The goal is to present a comparison between identified repository concepts by 2013. The material should be of such a quality that SKB can make decisions of which concepts that are to be further investigated in a safety analysis. As a part of the R and D program for the LL-LILW disposal facility, Studsvik was assigned to investigate whether melting of metallic LL-LILW is technically feasible and, if so, what the requirements are to build and operate such a facility. Specific concern was given to the following metallic components: - Core components and reactor internals from both boiling water reactors (BWRs) and pressurized water reactors (PWRs). - Reactor pressure vessels from PWRs. The paper presents a feasibility study of a melting facility for core components and reactor internals. An overview is given of how such a facility for treatment of intermediate level waste might be designed, constructed and operated and highlights both the possibilities and challenges. A cost estimate and a risk analysis are presented in order to make a conclusion of the technical feasibility of such a facility. Based on the Studsvik authors' experience in operating a low level waste melting facility, their conclusion is presented in the paper, considering cost of constructing and operating such a facility, in conjunction with the radio-logical risks associated with operation and the benefits to disposal and long term safety. Studsvik also investigated alternative techniques for embedding of metallic ILW components. Embedding of radioactive metallic ILW components protects the component from corrosion and leakage of radionuclides from repository to biosphere can thereby be both delayed and decreased. Conditioning by embedding has

No association between pseudotumors, high serum metal-ion levels and metal hypersensitivity in large-head metal-on-metal total hip arthroplasty at 5-7-year follow-up

DEFF Research Database (Denmark)

Hjorth, Mette Holm; Stilling, Maiken; Soballe, Kjeld

2015-01-01

-ion concentrations were measured, metal allergy and atopic dermatitis were evaluated, and the questionnaires of the Oxford Hip Score (OHS), Harris Hip Score (HHS) and the Short-Form Health Survey (SF-36) were completed. RESULTS: Pseudotumors were found in eight patients, but they were asymptomatic and their serum...... pseudotumor formation, serum metal-ion levels, metal patch test reactivity, and atopic dermatitis. However, clinicians should be aware of asymptomatic pseudotumors, and we advise further exploration into the mechanisms involved in the pathogenesis of pseudotumors.......OBJECTIVE: The relationship between metal wear debris, pseudotumor formation and metal hypersensitivity is complex and not completely understood. The purpose of this study was to assess the prevalence of pseudotumor formation in a consecutive series of metal-on-metal (MoM) total hip arthroplasty...

Air quality in the Kootenays: fine particulate (PM{sub 1}0) airborne metals and sulphur dioxide levels, 1993-1999

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Air quality monitoring data collected in the Kootenays over a seven year period from 1993 to 1999 are summarized in an effort to inform the public about air quality in the Kootenays and to assist them in understanding air quality monitoring results. Data includes hourly (TEOM) and weekly (NAPS) data for particulate matter (PM{sub 1}0) airborne metals (arsenic, cadmium, lead and zinc) and sulphur dioxide. Analysis of monitoring data showed that particulate matter levels remained constant in most communities, with Johnson Lake and Slocan reporting the lowest levels, while Golden had the highest values during this period. Trail-Butler Park showed a clear declining trend in PM{sub 1}0. Airborne metals and sulphur dioxide levels have decreased in the Kootenays during the seven year period, with only occasional exceedances of both Level A and B air quality objectives in some communities. The report includes a detailed description of the sampling methodology and the analyzed results for PM{sub 1}0, airborne metals and sulphur dioxide for 10 communities in the region. 6 refs., 1 tab., 16 figs., 1 map.

Trace metal levels in sediments of Pearl Harbor (Hawaii)

International Nuclear Information System (INIS)

Ashwood, T.L.; Olsen, C.R.; Larsen, I.L.; Tamura, T.

1986-09-01

This study was conducted to measure the distribution of lead and other trace metals in the sediments of Pearl Harbon (Hawaii) to determine whether paint chips from vessels of the US Navy's Inactive Fleet have affected the environmental quality of Middle Loch. Sediment cores (ranging from 0.5 to 3.0 m long) were collected from Middle Loch near the Naval Inactive Ships Maintenance Facility and in an area of West Loch that is relatively isolated and unaffected by naval operations. Concentrations of copper, lead, and zinc averaged 180 μg/g, 49 μg/g, and 272 μg/g, respectively, in recent Middle Loch sediments. These concentrations are significantly higher than those in either historical Middle Loch sediments or recent West Loch sediments. However, except for lead, the concentrations in recent Middle Loch sediments are similar to those of older Middle Loch sediments, which indicates that the increase in trace metal contamination began before the onset of Inactive Fleet operations (about 1946). Increased trace metal levels in recent Middle Loch sediments might be expected to result from two potential sources: (1) sewage discharges and (2) paint from inactive vessels. Since paint contains elevated levels of lead and zinc but little copper, the elevated copper levels in Middle Loch sediments tend to implicate sewage as the source of trace metal contamination. Moreover, the lead:zinc ratio of recent Middle Loch sediments (0.18:1) is a factor of 10 lower than that measured in paint (2.1:1), and the Middle Loch lead:zinc ratio is not significantly greater than that measured in recent West Loch sediments (0.21:1). Hence, we suggest that sewage rather than paint is the major source of trace metal contamination of Middle Loch. This is consistent with the findings of a previous study by US navy personnel

Evaluating Heavy Metal Stress Levels in Rice Based on Remote Sensing Phenology.

Science.gov (United States)

Liu, Tianjiao; Liu, Xiangnan; Liu, Meiling; Wu, Ling

2018-03-14

Heavy metal pollution of croplands is a major environmental problem worldwide. Methods for accurately and quickly monitoring heavy metal stress have important practical significance. Many studies have explored heavy metal stress in rice in relation to physiological function or physiological factors, but few studies have considered phenology, which can be sensitive to heavy metal stress. In this study, we used an integrated Normalized Difference Vegetation Index (NDVI) time-series image set to extract remote sensing phenology. A phenological indicator relatively sensitive to heavy metal stress was chosen from the obtained phenological periods and phenological parameters. The Dry Weight of Roots (WRT), which directly affected by heavy metal stress, was simulated by the World Food Study (WOFOST) model; then, a feature space based on the phenological indicator and WRT was established for monitoring heavy metal stress. The results indicated that the feature space can distinguish the heavy metal stress levels in rice, with accuracy greater than 95% for distinguishing the severe stress level. This finding provides scientific evidence for combining rice phenology and physiological characteristics in time and space, and the method is useful to monitor heavy metal stress in rice.

Levels of essential and non-essential metals in the raw seeds and ...

African Journals Online (AJOL)

The levels of metals in raw maize seeds and its processed foods (roasted seed and bread) collected from Shendi, Finote Selam and Debre Tabor (Ethiopia) were determined by flame atomic absorption spectrometry (major metals) and graphite furnace atomic absorption spectrometry (trace and heavy metals) after wet ...

Statistical evaluation of essential/toxic metal levels in the blood of valvular heart disease patients in comparison with controls.

Science.gov (United States)

Ilyas, Asim; Shah, Munir H

2017-05-12

The present study was designed to investigate the role of selected essential and toxic metals in the onset/prognosis of valvular heart disease (VHD). Nitric acid-perchloric acid based wet digestion procedure was used for the quantification of the metals by flame atomic absorption spectrophotometry. Comparative appraisal of the data revealed that average levels of Cd, Co, Cr, Fe, K, Li, Mn and Zn were significantly higher in blood of VHD patients, while the average concentration of Ca was found at elevated level in controls (P < 0.05). However, Cu, Mg, Na, Sr and Pb depicted almost comparable levels in the blood of both donor groups. The correlation study revealed significantly different mutual associations among the metals in the blood of VHD patients compared with the controls. Multivariate statistical methods showed substantially divergent grouping of the metals for the patients and controls. Some significant differences in the metal concentrations were also observed with gender, abode, dietary/smoking habits and occupations of both donor groups. Overall, the study demonstrated that disproportions in the concentrations of essential/toxic metals in the blood are involved in pathogenesis of the disease.

Metal levels in southern leopard frogs from the Savannah River Site: location and body compartment effects.

Science.gov (United States)

Burger, J; Snodgrass, J

2001-06-01

Tadpoles have been proposed as useful bioindicators of environmental contamination; yet, recently it has been shown that metal levels vary in different body compartments of tadpoles. Metals levels are higher in the digestive tract of bullfrog (Rana catesbeiana) tadpoles, which is usually not removed during such analysis. In this paper we examine the heavy metal levels in southern leopard frog (R. utricularia) tadpoles from several wetlands at the Savannah River Site and test the null hypotheses that (1) there are no differences in metal levels in different body compartments of the tadpoles, including the digestive tract; (2) there are no differences in heavy metal levels among different wetlands; and (3) there are no differences in the ratio of metals in the tail/body and in the digestive tract/body as a function of metal or developmental stage as indicated by body weight. Variations in heavy metal levels were explained by wetland and body compartment for all metals and by tadpole weight for selenium and manganese. In all cases, levels of metals were higher in the digestive tract than in the body or tail of tadpoles. Metal levels were highest in a wetland that had been remediated and lowest in a wetland that was never a pasture or remediated (i.e., was truly undisturbed). Although tadpoles are sometimes eaten by fish and other aquatic predators, leopard frogs usually avoid laying their eggs in ponds with such predators. However, avian predators will eat them. These data suggest that tadpoles can be used as bioindicators of differences in metal levels among wetlands and as indicators of potential exposure for higher-trophic-level organisms, but that to assess effects on the tadpoles themselves, digestive tracts should be removed before analysis. Copyright 2001 Academic Press.

Metal tissue levels in Steller sea lion (Eumetopias jubatus) pups

Energy Technology Data Exchange (ETDEWEB)

Holmes, Amie L.; Wise, Sandra S. [Wise Laboratory of Environmental and Genetic Toxicology, University of Southern Maine, 96 Falmouth Street, Portland, ME 04104 (United States); Maine Center for Toxicology and Environmental Health, University of Southern Maine, 96 Falmouth Street, Portland, ME 04104 (United States); Goertz, Caroline E.C. [Wise Laboratory of Environmental and Genetic Toxicology, University of Southern Maine, 96 Falmouth Street, Portland, ME 04104 (United States); Alaska SeaLife Center, 301 Railway Avenue, Seward, AK 99664 (United States); Dunn, J. Lawrence [Department of Research and Veterinary Care, Mystic Aquarium, 55 Coogan Boulevard, Mystic, CT 06355 (United States); Gulland, Frances M.D. [Marine Mammal Center, 1065 Fort Cronkhite, Sausalito, CA 94965 (United States); Gelatt, Tom [National Marine Fisheries Service, Alaska Fisheries Science Center, National Marine Mammal Lab, 7600 Sand Point Way NE, Seattle, WA 98115 (United States); Beckmen, Kimberlee B. [Alaska Department of Fish and Game, 1300 College Road, Fairbanks, AK 99701 (United States); Burek, Kathy [Veterinary Pathology Services, 23834 The Clearing Drive, Eagle River, AK 99577 (United States); Atkinson, Shannon; Bozza, Mary [Alaska SeaLife Center, 301 Railway Avenue, Seward, AK 99664 (United States); Taylor, Robert [Department of Veterinary Integrative Biosciences, Texas A and M University, Highway 60, College Station, TX 77843 (United States); Zheng Tongzhang; Zhang Yawei [School of Epidemiology and Public Health, Yale University, 60 College Street, New Haven, CT 06520 (United States); Aboueissa, AbouEl-Makarim [Department of Mathematics and Statistics, University of Southern Maine, 96 Falmouth Street, Portland, ME 04104 (United States)] (and others)

2008-08-15

The endangered Western population of the Steller sea lion declined for three decades for uncertain reasons. We present baseline data of metal concentrations in pups as a first step towards investigating the potential threat of developmental exposures to contaminants. Seven metals were investigated: arsenic, cadmium, silver, aluminum, mercury, lead and vanadium. Vanadium was detected in only a single blubber sample. Mercury appears to be the most toxicologically significant metal with concentrations in the liver well above the current action level for mercury in fish. The concentrations of aluminum, arsenic, silver, cadmium and lead were present in one-fourth to two-thirds of all samples and were at either comparable or below concentrations previously reported. Neither gender nor region had a significant effect on metal burdens. Future work should consider metal concentrations in juveniles and adults and toxicological studies need to be performed to begin to assess the toxicity of these metals.

Metal tissue levels in Steller sea lion (Eumetopias jubatus) pups.

Science.gov (United States)

Holmes, Amie L; Wise, Sandra S; Goertz, Caroline E C; Dunn, J Lawrence; Gulland, Frances M D; Gelatt, Tom; Beckmen, Kimberlee B; Burek, Kathy; Atkinson, Shannon; Bozza, Mary; Taylor, Robert; Zheng, Tongzhang; Zhang, Yawei; Aboueissa, Abouel-Makarim; Wise, John Pierce

2008-08-01

The endangered Western population of the Steller sea lion declined for three decades for uncertain reasons. We present baseline data of metal concentrations in pups as a first step towards investigating the potential threat of developmental exposures to contaminants. Seven metals were investigated: arsenic, cadmium, silver, aluminum, mercury, lead and vanadium. Vanadium was detected in only a single blubber sample. Mercury appears to be the most toxicologically significant metal with concentrations in the liver well above the current action level for mercury in fish. The concentrations of aluminum, arsenic, silver, cadmium and lead were present in one-fourth to two-thirds of all samples and were at either comparable or below concentrations previously reported. Neither gender nor region had a significant effect on metal burdens. Future work should consider metal concentrations in juveniles and adults and toxicological studies need to be performed to begin to assess the toxicity of these metals.

Metal tissue levels in Steller sea lion (Eumetopias jubatus) pups

International Nuclear Information System (INIS)

Holmes, Amie L.; Wise, Sandra S.; Goertz, Caroline E.C.; Dunn, J. Lawrence; Gulland, Frances M.D.; Gelatt, Tom; Beckmen, Kimberlee B.; Burek, Kathy; Atkinson, Shannon; Bozza, Mary; Taylor, Robert; Zheng Tongzhang; Zhang Yawei; Aboueissa, AbouEl-Makarim

2008-01-01

The endangered Western population of the Steller sea lion declined for three decades for uncertain reasons. We present baseline data of metal concentrations in pups as a first step towards investigating the potential threat of developmental exposures to contaminants. Seven metals were investigated: arsenic, cadmium, silver, aluminum, mercury, lead and vanadium. Vanadium was detected in only a single blubber sample. Mercury appears to be the most toxicologically significant metal with concentrations in the liver well above the current action level for mercury in fish. The concentrations of aluminum, arsenic, silver, cadmium and lead were present in one-fourth to two-thirds of all samples and were at either comparable or below concentrations previously reported. Neither gender nor region had a significant effect on metal burdens. Future work should consider metal concentrations in juveniles and adults and toxicological studies need to be performed to begin to assess the toxicity of these metals

Multiple metals predict prolactin and thyrotropin (TSH) levels in men

Energy Technology Data Exchange (ETDEWEB)

Meeker, John D., E-mail: meekerj@umich.edu [Department of Environmental Health Sciences, University of Michigan School of Public Health, 6635 SPH Tower, 109 S. Observatory St., Ann Arbor, MI 48109 (United States); Rossano, Mary G. [Department of Animal and Food Sciences, University of Kentucky, Lexington, KY (United States); Protas, Bridget [Department of Epidemiology, Michigan State University, East Lansing, MI (United States); Diamond, Michael P.; Puscheck, Elizabeth [Department of Obstetrics and Gynecology, Wayne State University, Detroit, MI (United States); Daly, Douglas [Grand Rapids Fertility and IVF, Grand Rapids, MI (United States); Paneth, Nigel [Department of Obstetrics and Gynecology, Michigan State University, East Lansing, MI (United States); Wirth, Julia J. [Department of Epidemiology, Michigan State University, East Lansing, MI (United States); Department of Obstetrics and Gynecology, Michigan State University, East Lansing, MI (United States)

2009-10-15

Exposure to a number of metals can affect neuroendocrine and thyroid signaling, which can result in adverse effects on development, behavior, metabolism, reproduction, and other functions. The present study assessed the relationship between metal concentrations in blood and serum prolactin (PRL) and thyrotropin (TSH) levels, markers of dopaminergic, and thyroid function, respectively, among men participating in a study of environmental influences on male reproductive health. Blood samples from 219 men were analyzed for concentrations of 11 metals and serum levels of PRL and TSH. In multiple linear regression models adjusted for age, BMI and smoking, PRL was inversely associated with arsenic, cadmium, copper, lead, manganese, molybdenum, and zinc, but positively associated with chromium. Several of these associations (Cd, Pb, Mo) are consistent with limited studies in humans or animals, and a number of the relationships (Cr, Cu, Pb, Mo) remained when additionally considering multiple metals in the model. Lead and copper were associated with non-monotonic decrease in TSH, while arsenic was associated with a dose-dependent increase in TSH. For arsenic these findings were consistent with recent experimental studies where arsenic inhibited enzymes involved in thyroid hormone synthesis and signaling. More research is needed for a better understanding of the role of metals in neuroendocrine and thyroid function and related health implications.

Multiple metals predict prolactin and thyrotropin (TSH) levels in men

International Nuclear Information System (INIS)

Meeker, John D.; Rossano, Mary G.; Protas, Bridget; Diamond, Michael P.; Puscheck, Elizabeth; Daly, Douglas; Paneth, Nigel; Wirth, Julia J.

2009-01-01

Exposure to a number of metals can affect neuroendocrine and thyroid signaling, which can result in adverse effects on development, behavior, metabolism, reproduction, and other functions. The present study assessed the relationship between metal concentrations in blood and serum prolactin (PRL) and thyrotropin (TSH) levels, markers of dopaminergic, and thyroid function, respectively, among men participating in a study of environmental influences on male reproductive health. Blood samples from 219 men were analyzed for concentrations of 11 metals and serum levels of PRL and TSH. In multiple linear regression models adjusted for age, BMI and smoking, PRL was inversely associated with arsenic, cadmium, copper, lead, manganese, molybdenum, and zinc, but positively associated with chromium. Several of these associations (Cd, Pb, Mo) are consistent with limited studies in humans or animals, and a number of the relationships (Cr, Cu, Pb, Mo) remained when additionally considering multiple metals in the model. Lead and copper were associated with non-monotonic decrease in TSH, while arsenic was associated with a dose-dependent increase in TSH. For arsenic these findings were consistent with recent experimental studies where arsenic inhibited enzymes involved in thyroid hormone synthesis and signaling. More research is needed for a better understanding of the role of metals in neuroendocrine and thyroid function and related health implications.

Blood metal levels and metal-influenced immune functions of harbour seals in captivity

International Nuclear Information System (INIS)

Kakuschke, Antje; Valentine-Thon, Elizabeth; Griesel, Simone; Rosenberger, Tanja; Mundry, Roger; Siebert, Ursula; Prange, Andreas

2008-01-01

Immunological blood parameters and the effects of environmental pollutants on the immune system are important to assess the health status of seals. Animals living permanently in seal centres are useful for development and validation of diagnostic tools for free-ranging animals. In this study, parameters of cellular immunity as well as metal concentrations in blood and metal influence on cell proliferation of seven seals from a seal centre were investigated repeatedly using multi-element analysis and a lymphocyte proliferation assay. The metal concentrations, except for tin and chromium, were in general comparable to those of free-ranging animals of the North Sea. The unstimulated and mitogen-stimulated lymphocyte proliferation showed strong intra- and inter-individual variability, which reflected variability in activation of the immune status. Furthermore, both immunosuppressive and stimulative influences of metals on lymphocytes were found. Summarising, the methods used in this investigation provided useful information on these animals, and their application to free-ranging animals can be recommended

Blood metal levels and metal-influenced immune functions of harbour seals in captivity

Energy Technology Data Exchange (ETDEWEB)

Kakuschke, Antje [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany)], E-mail: antje.kakuschke@gkss.de; Valentine-Thon, Elizabeth [Department of Immunology, Laboratory Center Bremen, Friedrich-Karl-Strasse 22, 28205 Bremen (Germany); Griesel, Simone [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Rosenberger, Tanja [Seal Centre Friedrichskoog e.V., 25718 Friedrichskoog (Germany); Mundry, Roger [Research and Technology Centre Westcoast (FTZ), University of Kiel, Hafentoern 1, 25761 Buesum (Germany); Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, 04103 Leipzig (Germany); Siebert, Ursula [Research and Technology Centre Westcoast (FTZ), University of Kiel, Hafentoern 1, 25761 Buesum (Germany); Prange, Andreas [GKSS Research Centre, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany)

2008-04-15

Immunological blood parameters and the effects of environmental pollutants on the immune system are important to assess the health status of seals. Animals living permanently in seal centres are useful for development and validation of diagnostic tools for free-ranging animals. In this study, parameters of cellular immunity as well as metal concentrations in blood and metal influence on cell proliferation of seven seals from a seal centre were investigated repeatedly using multi-element analysis and a lymphocyte proliferation assay. The metal concentrations, except for tin and chromium, were in general comparable to those of free-ranging animals of the North Sea. The unstimulated and mitogen-stimulated lymphocyte proliferation showed strong intra- and inter-individual variability, which reflected variability in activation of the immune status. Furthermore, both immunosuppressive and stimulative influences of metals on lymphocytes were found. Summarising, the methods used in this investigation provided useful information on these animals, and their application to free-ranging animals can be recommended.

Role of extrinsic arbuscular mycorrhizal fungi in heavy metal-contaminated wetlands with various soil moisture levels.

Science.gov (United States)

Zheng, S; Wang, C; Shen, Z; Quan, Y; Liu, X

2015-01-01

This study presents an efficient heavy metal (HM) control method in HM-contaminated wetlands with varied soil moisture levels through the introduction of extrinsic arbuscular mycorrhizal fungi (AMF) into natural wetland soil containing indigenous AMF species. A pot culture experiment was designed to determine the effect of two soil water contents (5-8% and 25-30%), five extrinsic AMF inoculants (Glomus mosseae, G. clarum, G. claroideum, G. etunicatum, and G. intraradices), and HM contamination on root colonization, plant growth, and element uptake of common reed (Phragmites australis (Cav.) Trin. ex Steudel) plantlets in wetland soils. This study showed the prevalence of mycorrhizae in the roots of all P. australis plantlets, regardless of extrinsic AMF inoculations, varied soil moisture or HM levels. It seems that different extrinsic AMF inoculations effectively lowered HM concentrations in the aboveground tissues of P. australis at two soil moisture levels. However, metal species, metal concentrations, and soil moisture should also be very important factors influencing the elemental uptake performance of plants in wetland ecosystems. Besides, the soil moisture level significantly influenced plant growth (including height, and shoot and root dry weight (DW)), and extrinsic AMF inoculations differently affected shoot DW.

Seasonal variations in the level of heavy metals in the water of minor rivers

Directory of Open Access Journals (Sweden)

I. L. Sukhodolska

2017-01-01

presence of nickel in the surface water. For the investigated rivers, the most significant factors in the water’s chemical composition are physiographic (foremost, the character of the soil cover, intensivity of erosion, extent of forest and swamp cover and anthropogenous impact. In the rivers of Rivne region high concentrations of heavy metals are the consequence of the long-term aggradation of abiotic and biotic substances of the water ecosystem. There is a tendency for a reduction in the concentration of most metals in the abiotic substances of the water reservoir during the vegetative season and an increase after the end of this season. This research shows that the high level of contamination of the water of Rivne region’s minor rivers by the investigated heavy metal components is caused primarily by anthropogenic factors.

Leachate and Pollution Levels of Heavy Metals in the Groundwater near Municipal Solid Waste Landfill Site of Mashhad, Iran

Directory of Open Access Journals (Sweden)

Borhan Mansouri

2014-06-01

Full Text Available Background: The purpose of this study is to investigate the concentration of metals (lead, cadmium, chromium, copper, and nickel in the landfill leachate and heavy metals in wells downstream of municipal solid waste landfill site in the city of Mashhad. Methods: In both winter and summer seasons in 2009 samples were collected from five wells that were in landfill downstream in Mashhad. Results: Among heavy metals, nickel concentration in summer and lead concentration in winter had the highest levels. The results showed that the mean concentration of heavy metals in the studied wells was below the national standards of drinking water of Iran, WHO, and the United States. Pearson correlation coefficients also indicated that there was a significant correlation among the studied metals in the wells. Conclusion: Cd and Cu concentrations in all of the wells (except Pb in winter and Ni in summer did not pose any significant water quality problems since these concentrations were below the standards acceptable levels of drinking water.

Is metal contamination responsible for increasing aneuploidy levels in the Manila clam Ruditapes philippinarum?

KAUST Repository

Piló, D.

2016-11-03

The present study assessed the metal genotoxicity potential at chromosome-level in the bivalve Ruditapes philippinarum collected along different areas of the Tagus estuary. Higher levels of aneuploidy on gill cells were detected at the most sediment contaminated area both in May (31.7%) and October (36.0%) when compared to a less contaminated area over the same periods (20.3% and 29.0% respectively). Interestingly, metal bioaccumulation in gills was higher in the specimens collected at the least contaminated area with the exception of Pb. Indeed, the multivariate analysis revealed a stronger relation between aneuploidy and sediment contamination than between aneuploidy and the bioaccumulation of the metals. The temporal and spatial inconsistency found for the bioaccumulation of metals in R. philippinarum and the positive correlation between sediment contamination and aneuploidy at the most contaminated area suggest that these chromosome-level effects might be due to chronic metal contamination occurring in the Tagus estuary, rather than a direct result of the temporal variation of bioavailable contaminants. The vertical transmission phenomenon of bivalve aneuploidy levels may then be perpetuating those levels on clams from the most contaminated area. The present results shed light about the effect of metal toxicity at the chromosome-level in species inhabiting chronic contaminated areas and highlight the use of aneuploidy as an effective tool to identify persistent contamination in worldwide transitional waters.

ESTIMATION OF HEAVY METAL LEVELS IN GREEN LEAFY VEGETABLES PURCHASED FROM SUCEAVA

Directory of Open Access Journals (Sweden)

Ancuța Elena PRISACARU

2017-12-01

Full Text Available In the present study the levels of five important heavy metals were identified in vegetable samples purchased from Suceava local markets. The concentrations of Cadmium (Cd, Lead (Pb, Iron (Fe, Zinc (Zn and Copper (Cu were analysed using a mass spectrometer with inductively coupled plasma (ICP-MS from the Instrumental Analysis Laboratory within the Faculty of Food Engineering Suceava. The mean levels of heavy metals examined in spinach (Spinacia oleracea, ramsons (Allium ursinum, lettuce (Lactuca sativa, orache (Atriplex hortensis and nettle (Urtica dioica were found to be in the order: Fe (13.52 µg/g > Cu (4.83 µg/g > Zn (3.623 µg/g > Cd (1.890 µg/g> Pb (0.290 µg/g. The highest concentration of heavy metal was identified in the case of Fe (51.333 µg/g in ramsons, whereas the lowest amount was identified for Pb (0.227 µg/g orache. The estimated daily intake for Cd is above 60 µg/kg b.w./day. The levels of the other metals are lower than the safe limits predicted by the FAO/WHO.

[Transfer characteristic and source identification of soil heavy metals from water-level-fluctuating zone along Xiangxi River, three-Gorges Reservoir area].

Science.gov (United States)

Xu, Tao; Wang, Fei; Guo, Qiang; Nie, Xiao-Qian; Huang, Ying-Ping; Chen, Jun

2014-04-01

Transfer characteristics of heavy metals and their evaluation of potential risk were studied based on determining concentration of heavy metal in soils from water-level-fluctuating zone (altitude:145-175 m) and bank (altitude: 175-185 m) along Xiangxi River, Three Gorges Reservoir area. Factor analysis-multiple linear regression (FA-MLR) was employed for heavy metal source identification and source apportionment. Results demonstrate that, during exposing season, the concentration of soil heavy metals in water-level-fluctuation zone and bank showed the variation, and the concentration of soil heavy metals reduced in shallow soil, but increased in deep soil at water-level-fluctuation zone. However, the concentration of soil heavy metals reduced in both shallow and deep soil at bank during the same period. According to the geoaccumulation index,the pollution extent of heavy metals followed the order: Cd > Pb > Cu > Cr, Cd is the primary pollutant. FA and FA-MLR reveal that in soils from water-level-fluctuation zone, 75.60% of Pb originates from traffic, 62.03% of Cd is from agriculture, 64.71% of Cu and 75.36% of Cr are from natural rock. In soils from bank, 82.26% of Pb originates from traffic, 68.63% of Cd is from agriculture, 65.72% of Cu and 69.33% of Cr are from natural rock. In conclusion, FA-MLR can successfully identify source of heavy metal and compute source apportionment of heavy metals, meanwhile the transfer characteristic is revealed. All these information can be a reference for heavy metal pollution control.

Prostate cancer outcome and tissue levels of metal ions

Science.gov (United States)

Sarafanov, A.G.; Todorov, T.I.; Centeno, J.A.; MacIas, V.; Gao, W.; Liang, W.-M.; Beam, C.; Gray, Marion A.; Kajdacsy-Balla, A.

2011-01-01

BACKGROUNDThere are several studies examining prostate cancer and exposure to cadmium, iron, selenium, and zinc. Less data are available on the possible influence of these metal ions on prostate cancer outcome. This study measured levels of these ions in prostatectomy samples in order to examine possible associations between metal concentrations and disease outcome.METHODSWe obtained formalin fixed paraffin embedded tissue blocks of prostatectomy samples of 40 patients with PSA recurrence, matched 1:1 (for year of surgery, race, age, Gleason grading, and pathology TNM classification) with tissue blocks from 40 patients without recurrence (n = 80). Case–control pairs were compared for the levels of metals in areas adjacent to tumors. Inductively coupled plasma-mass spectrometry (ICP-MS) was used for quantification of Cd, Fe, Zn, and Se.RESULTSPatients with biochemical (PSA) recurrence of disease had 12% lower median iron (95 µg/g vs. 111 µg/g; P = 0.04) and 21% lower zinc (279 µg/g vs. 346 µg/g; P = 0.04) concentrations in the normal-appearing tissue immediately adjacent to cancer areas. Differences in cadmium (0.489 µg/g vs. 0.439 µg/g; 4% higher) and selenium (1.68 µg/g vs. 1.58 µg/g; 5% higher) levels were not statistically significant in recurrence cases, when compared to non-recurrences (P = 0.40 and 0.21, respectively).CONCLUSIONSThere is an association between low zinc and low iron prostate tissue levels and biochemical recurrence in prostate cancer. Whether these novel findings are a cause or effect of more aggressive tumors, or whether low zinc and iron prostatic levels raise implications for therapy, remains to be investigated. 

Interspecific and locational differences in metal levels in edible fish tissue from Saudi Arabia

KAUST Repository

Burger, Joanna

2014-07-06

Metal levels in fish have been extensively studied, but little data currently exists for the Middle East. We examined the levels of metals and metalloids (aluminum, arsenic, copper, manganese, selenium, zinc, and mercury) in the flesh of 13 fish species collected from three fishing sites and a local fish market in Jeddah, Saudi Arabia. We tested the following null hypotheses: (1) there are no interspecific differences in metal levels, (2) there are no differences in metal levels in fishes between market and fishing sites, (3) there are no size-related differences in metal levels, and (4) there are no differences in selenium:mercury molar ratio among different fish species. There were significant interspecific differences in concentrations for all metals. There was an order of magnitude difference in the levels of aluminum, arsenic, mercury, manganese, and selenium, indicating wide variation in potential effects on the fish themselves and on their predators. Fishes from Area II, close to a large commercial port, had the highest levels of arsenic, mercury, and selenium, followed by market fishes. Mercury was positively correlated with body size in 6 of the 13 fish species examined. Mercury was correlated positively with arsenic and selenium, but negatively with aluminum, cobalt, copper, manganese, and zinc. Selenium:mercury molar ratios varied significantly among species, with Carangoides bajad, Cephalopholis argus, Variola louti, and Ephinephelus tauvina having ratios below 10:1. These findings can be used in risk assessments, design of mercury reduction plans, development of fish advisories to protect public health, and future management decision-making.

BPEO/BPM in recycling of low level waste metal in the UK - 16210

International Nuclear Information System (INIS)

Dodd, Kevin; Robinson, Joe; Lindberg, Maria

2009-01-01

Best Practicable Environmental Option (BPEO) and Best Practicable Means (BPM) are concepts well established in the nuclear industry to help guide and inform waste management decision making. The recycling of contaminated metal waste in the UK is not well established, with the majority of waste disposed of at the Low Level Waste Repository (LLWR) at Drigg. This paper presents an overview of the Strategic BPEO study completed by Studsvik examining the options for low level metal waste management and a subsequent BPM study completed in support of a proposed metals recycling service. The environmental benefits of recycling metals overseas is further examined through the application of life cycle analysis to the metals recycling process. The methodologies used for both studies are discussed and the findings of these studies presented. These indicate that recycling contaminated metal is the preferred option, using overseas facilities until UK facilities are available. The BPM for metals recycling is discussed in detail and indicates that a tool box for processing metal waste is required to ensure BPM is applied on a case by case basis. This is supported by effective management of waste transport and waste acceptance criteria. Whilst the transport of contaminated metal overseas for treatment adds to the environmental burden of metals recycling, this when compared with the production of virgin metal, is shown to remain beneficial. The results of the Studsvik studies demonstrate the benefits of recycling metals, the options available for such a service and challenges that remain. (authors)

Fermi level pinning in metal/Al{sub 2}O{sub 3}/InGaAs gate stack after post metallization annealing

Energy Technology Data Exchange (ETDEWEB)

Winter, R.; Krylov, I.; Cytermann, C.; Eizenberg, M. [Department of Materials Science and Engineering, Technion—Israel Institute of Technology, Haifa 32000 (Israel); Tang, K.; Ahn, J.; McIntyre, P. C. [Department of Materials Science and Engineering, Stanford University, Stanford, California 94305 (United States)

2015-08-07

The effect of post metal deposition annealing on the effective work function in metal/Al{sub 2}O{sub 3}/InGaAs gate stacks was investigated. The effective work functions of different metal gates (Al, Au, and Pt) were measured. Flat band voltage shifts for these and other metals studied suggest that their Fermi levels become pinned after the post-metallization vacuum annealing. Moreover, there is a difference between the measured effective work functions of Al and Pt, and the reported vacuum work function of these metals after annealing. We propose that this phenomenon is caused by charging of indium and gallium induced traps at the annealed metal/Al{sub 2}O{sub 3} interface.

Levels of selected metals in leaves of Cannabis sativa L. cultivated in Ethiopia.

Science.gov (United States)

Zerihun, Agalu; Chandravanshi, Bhagwan Singh; Debebe, Ayalew; Mehari, Bewketu

2015-01-01

Cannabis sativa L. is one of the illicit drug bearing plants. Cannabis products are the most widely trafficked drugs worldwide. The highest levels of cannabis production in the world take place in the African continent. A small volume of cannabis is produced in rural areas of Ethiopia, of which a small portion is exported to neighboring countries and the majority is consumed at home. The literature survey revealed that there is no report on the metal contents in cannabis cultivated in Ethiopia. The main objective of this study is to determine the level of selected metals in leaves of Cannabis sativa L. cultivated in Ethiopia. Cannabis sativa L. samples were collected from Metema (Amhara Region), Mekelle (Tigray Region), Sheshemene (Oromia Region) and Butajira (South Nations Nationality and Peoples (SNNP) Region) of Ethiopia. After proper sample pretreatment, the volumes of reagents used, digestion temperature and digestion time were optimized and using the optimized conditions the levels of metals were determined by flame atomic absorption spectrometry. The accuracy of the optimized procedure was evaluated by analyzing the digest of the spiked samples with standard solution and the percentage recoveries varied from 88 to 103%. The levels of metals determined (µg/g dry weight) were in the ranges Ca (657-1,511), Zn (321-380), Ni (124-172), Cu (122-176), Cd (3-10), Pb (8-10), and Cr (4-8). Zn was with the highest concentration among trace metals. A statistical analysis of variance (ANOVA) at 95% confidence level indicated that there is a significant difference in the levels of all the metals between the four sample means except Pb. The results indicate that the content of Pb and Cd exceeds the permissible amount for medicinal plants which form the raw materials for the finished products set by World Health Organization (WHO).

Determination of the levels of heavy metal (Cu, Fe, Ni, Pb and Cd ...

African Journals Online (AJOL)

MICHAEL HORSFALL

consumption or animal feed. This because the ingestion level of these metals are far above ... shown that the extent of soil pollution by heavy metals some of which were soil micronutrients is very alarming ... terrestrial foods grown in contaminated soil contain high level of Cd. Lead has no known beneficial effect to man ( ...

Physicochemical Characteristics and Heavy Metal Levels in Soil ...

African Journals Online (AJOL)

ADOWIE PERE

weathering of mineral; the anthropogenic sources are associated mainly with ... al., 2013 reported high levels of Cd, Zn, Ni, Cr and. Pb from soil .... Determination of trace elements (Zn and Mn): 5 g of the dried ..... vehicles constitute principal source of Pb. Lead ..... Interaction between metals and soil organic matter in various.

The role of the excited impurity levels on the metal-non metal transition

International Nuclear Information System (INIS)

Silva, M.S.F. da; Makler, S.S.; Anda, E.V.

1983-01-01

The electronic density of states for the impurity bands in doped semiconductors is calculated using the Green function method. The system is described by a Hamiltonian with local Coulomb interactions represented in a tight binding basis composed by two orbitals per site. The electronic correlation is treated in the CPA approximation. To calculate the configurational average for this structural disordered system a diagrammatic scheme is developed. It represents an extension of the Matsubara and Toyozawa method for the case of two hybridized bands in the presence of electronic correlation. The excited levels shown to play a crutial role in the understanding of the metal-non metal transition. This work represents an improvement of a previous result. The particular case of Si:P is analyzed. (Author) [pt

The Study of Quantum Interference in Metallic Photonic Crystals Doped with Four-Level Quantum Dots

Directory of Open Access Journals (Sweden)

Hatef Ali

2010-01-01

Full Text Available Abstract In this work, the absorption coefficient of a metallic photonic crystal doped with nanoparticles has been obtained using numerical simulation techniques. The effects of quantum interference and the concentration of doped particles on the absorption coefficient of the system have been investigated. The nanoparticles have been considered as semiconductor quantum dots which behave as a four-level quantum system and are driven by a single coherent laser field. The results show that changing the position of the photonic band gap about the resonant energy of the two lower levels directly affects the decay rate, and the system can be switched between transparent and opaque states if the probe laser field is tuned to the resonance frequency. These results provide an application for metallic nanostructures in the fabrication of new optical switches and photonic devices.

Interspecific and locational differences in metal levels in edible fish tissue from Saudi Arabia

KAUST Repository

Burger, Joanna; Gochfeld, Michael; Batang, Zenon B.; Mannalamkunnath Alikunhi, Nabeel; Aljahdali, Ramzi; Al-Jebreen, Dalal; Aziz, Mohammed A. M.; Al-Suwailem, Abdulaziz M.

2014-01-01

species collected from three fishing sites and a local fish market in Jeddah, Saudi Arabia. We tested the following null hypotheses: (1) there are no interspecific differences in metal levels, (2) there are no differences in metal levels in fishes between

Heavy metal levels in the liver and muscle tissues of the four commercial fishes from Lake Balik, Kızılırmak Delta (Samsun, Turkey

Directory of Open Access Journals (Sweden)

Levent Bat

2015-12-01

Full Text Available Objective: To determine the levels of some heavy metals in the liver and edible tissues of four fish species [Mugil cephalus L., 1758 (M. cephalus, Cyprinus carpio L., 1758 (C. carpio, Perca fluviatilis L., 1758 (P. fluviatilis and Stizostedion lucioperca L., 1758 (S. lucioperca] collected from Lake Balik, Kizilirmak Delta (Samsun for analysis of Cu, Co, Pb, Zn, Cd, Mn, Ni and Fe. These metals were chosen because at higher concentrations there might be toxic to the fish and by extension humans that depends on such fish as food. Methods: The concentrations of the metals were carried out by the flame atomic absorption spectrophotometer (UNICAM 929. Results: Large differences in heavy metal levels were observed between liver and muscle tissues within each fish. The results showed that the Fe concentrations were the highest and Cd concentrations were the lowest in livers and edible tissues of the four species. The muscles of C. carpio accumulated significant higher levels of Co, Zn and Ni than other species. Cu was higher in the muscles of S. lucioperca than those in other species, while M. cephalus showed more of Mn and Fe levels. The muscles of P. fluviatilis accumulated significant higher levels of Pb and Cd than other species. However, the liver of M. cephalus accumulated significant higher levels of Co, Mn and Fe than other species. The level of Cd was the highest in the liver of P. fluviatilis, while S. lucioperca showed more of Cu and Pb, and the higher levels of Zn and Ni was measured in the liver of C. carpio. Conclusions: The metal levels obtained were compared with the maximum permitted levels in food of the Turkish Food Codex and Commission Regulation (EC. The results of this study showed that estimated daily and weekly intakes of selected metals via consumption of fish were below the permissible tolerable daily intake and provisional tolerable weekly intake values established by Food and Agriculture Organization/World Health

Responses of wild small mammals to a pollution gradient: Host factors influence metal and metallothionein levels

International Nuclear Information System (INIS)

Fritsch, Clementine; Cosson, Richard P.; Coeurdassier, Michael; Raoul, Francis; Giraudoux, Patrick; Crini, Nadia; Vaufleury, Annette de; Scheifler, Renaud

2010-01-01

We investigated how host factors (species, age, gender) modulated Cd, Pb, Zn, and Cu concentrations, metallothionein levels (MTs) and their relationships in 7 sympatric small mammal species along a pollution gradient. Cd concentrations in liver and kidneys increased with age in all species. Age effect on other metals and MTs differs among species. Gender did not influence metal and MT levels except in the bank vole. Three patterns linking internal metal concentrations and MTs were observed along the gradient: a low metal accumulation with a (i) high (wood mouse) or (ii) low (bank vole) level of MTs accompanied by a slight or no increase of MTs with Cd accumulation; (iii) an elevated metal accumulation with a sharp increase of MTs (common and pygmy shrews). In risk assessment and biomonitoring perspectives, we conclude that measurements of MTs and metals might be associated because they cannot be interpreted properly when considered separately. - Age more than gender and species more than trophic group influence metallic trace element and metallothionein levels and their relationships in wild small mammals exposed to metals.

Assessing Metal Levels in Children from the Mechanistic Indicators of Childhood Asthma(MICA) study

Science.gov (United States)

Toxic and essential metals levels can be used as health indicators. Here, we quantitatively compare and contrast toxic and essential metals levels in vacuum dust, urine, and fingernail samples of 109 children in Detroit, Michigan as part of The Mechanistic Indicators of Childhood...

Mineral and heavy metal levels of some fruits grown at the roadsides.

Science.gov (United States)

Hamurcu, Mehmet; Ozcan, Mehmet Musa; Dursun, Nesim; Gezgin, Sait

2010-06-01

The rate of heavy metal pollution of some minor fruit samples growing at the roadsides in Turkey were determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Pb, Zn and Cu were found at the high levels in the fruit samples. The results showed that the average level of Cu changed between 0.27 mg/kg (Sample 11) and 0.05 mg/kg (Sample 15), Cr 0.32 mg/kg (Sample 14) and 0.18 mg/kg (Sample 13), Ni 0.68 mg/kg (Sample 12) and 0.26 g/kg (Sample 15), Pb 2.86 mg/kg (Sample 12) and 1.54 mg/kg (Sample 4) and Se 12.96 mg/kg (Sample 14) and 5.42 mg/kg (Sample 7). The levels of Cu, Cd and Cr in samples do not appear to reach pollution levels. Copyright 2010 Elsevier Ltd. All rights reserved.

Influence of joint application of heavy metals on level of each metal accumulated in the periwinkle Tympanotonus fuscatus (Gastropoda: Potamididae)

International Nuclear Information System (INIS)

Otitoloju, A.A.; Don-Pedro, K.N.

2006-01-01

Most laboratory assessments on toxicity and bioaccumulation of heavy metals have been concentrated on the accumulation of these metal ions when exposed singly to the test organisms. However, under the natural environmental settings, the metals are never present in isolation and may interact with each other, therefore justifying the need to study the influence of joint application of metals on accumulated levels in exposed animals. In this study, exposure of the periwinkle Tympanotonus fuscatus to sublethal concentrations (equivalent to 0.1 and 0.01 of 96 h LC 5 0) of heavy metals revealed that they were bioaccumulative varying amounts, depending on the type of metal, exposure period and concentration in the test media. while Zn and Pb ions accumulation increased steadily with exposure time, the amounts of Cu accumulated fluctuated regularly over the 30-day experimental period. The levels of Zn, Cu and Cd bioaccumulated over the 30-day experimental period were reduced by over 2-6 folds (with bioaccumulation radio values ranging from 0.15 to 0.81) when compared to concentrations of the respective metals accumulated during single bioaccumulation studies. However, Pb concentrations accumulated during the joint action studies increased nearly 2-fold (bioaccumulation ratio range 1.36 to 2.0-fold). (author) [es

Metal accumulation in earthworms inhabiting floodplain soils

International Nuclear Information System (INIS)

Vijver, Martina G.; Vink, Jos P.M.; Miermans, Cornelis J.H.; Gestel, Cornelis A.M. van

2007-01-01

The main factors contributing to variation in metal concentrations in earthworms inhabiting floodplain soils were investigated in three floodplains differing in inundation frequency and vegetation type. Metal concentrations in epigeic earthworms showed larger seasonal variations than endogeic earthworms. Variation in internal levels between sampling intervals were largest in earthworms from floodplain sites frequently inundated. High and low frequency flooding did not result in consistent changes in internal metal concentrations. Vegetation types of the floodplains did not affect metal levels in Lumbricus rubellus, except for internal Cd levels, which were positively related to the presence of organic litter. Internal levels of most essential metals were higher in spring. In general, no clear patterns in metal uptake were found and repetition of the sampling campaign will probably yield different results. - Metal levels in earthworms show large variation among sites, among seasons and among epigeic and endogeic species

Serum Lipids and Lipoproteins Levels and Selected Trace Metals In ...

African Journals Online (AJOL)

This study aim to determine the serum levels of trace metals and correlate same with serum levels of lipoproteins (an established marker of HBP) in newly diagnosed hypertensives (NDH) A total of 50 NDH subjects (24 males and 26 females) attending Ladoke Akintola University of Technology Teaching Hospital, Osogbo ...

Selected trace metal levels in common vegetables grown in NWFP, Pakistan

International Nuclear Information System (INIS)

Masud, K.; Jaffar, M.

1998-01-01

Seventeen vegetables procured from local markets of Peshawar and its suburbs were analyzed using wet digestion atomic absorption method for Fe, Pb, As, Hg, Cd, Cr, and Ni. The families investigated were: Cucurbitaceae, Solanaceae, Cruciferae, Liliaceae, Araceae, Leguminosae, Malvaceae, Umbelliferae and Zingiberaceae. The heavy metal data are reported at 99%(- + 2S) confidence level for triplicate measurements on sub samples of a given sample with an overall reproducibility of 2% compared with standard material samples. Comparison of averages through t-test indicates that each vegetable group is distinctly different from the other in terms of metal content. Maximum iron was present in garlic, at 4.585 mu g/g, dry weight (edible part-stem) of the Liliacease family. Arsenic was found to be below detection limit in all the vegetable groups. Lead levels were quite low, maximum concentration (0.0200 mu g/g, dry weight) was found in karaila (edible part-fruit). Mercury levels were relatively higher, with maximum concentration (2.590 mu g/g, dry weight) in gem (edible part-stem). The levels of nickel were moderately higher, being maximum (2.375 mu g/g dry weight) in karaila. The overall content of trace metals appeared to be within laid down internationally for safe human consumption, with only a few exceptions. (author)

Local, atomic-level elastic strain measurements of metallic glass thin films by electron diffraction

Energy Technology Data Exchange (ETDEWEB)

Ebner, C. [Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna (Austria); Sarkar, R. [Department of Materials Science and Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Rajagopalan, J. [Department of Materials Science and Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Department of Mechanical and Aerospace Engineering, School for Engineering of Matter Transport and Energy, Arizona State University, Tempe 85287 (United States); Rentenberger, C., E-mail: christian.rentenberger@univie.ac.at [Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna (Austria)

2016-06-15

A novel technique is used to measure the atomic-level elastic strain tensor of amorphous materials by tracking geometric changes of the first diffuse ring of selected area electron diffraction patterns (SAD). An automatic procedure, which includes locating the centre and fitting an ellipse to the diffuse ring with sub-pixel precision is developed for extracting the 2-dimensional strain tensor from the SAD patterns. Using this technique, atomic-level principal strains from micrometre-sized regions of freestanding amorphous Ti{sub 0.45}Al{sub 0.55} thin films were measured during in-situ TEM tensile deformation. The thin films were deformed using MEMS based testing stages that allow simultaneous measurement of the macroscopic stress and strain. The calculated atomic-level principal strains show a linear dependence on the applied stress, and good correspondence with the measured macroscopic strains. The calculated Poisson’s ratio of 0.23 is reasonable for brittle metallic glasses. The technique yields a strain accuracy of about 1×10{sup −4} and shows the potential to obtain localized strain profiles/maps of amorphous thin film samples. - Highlights: • A TEM method to measure elastic strain in metallic glass films is proposed. • Method is based on tracking geometric changes in TEM diffraction patterns. • An automatic procedure is developed for extracting the local strain tensor. • Atomic-level strain in amorphous TiAl film was analysed during in-situ deformation. • Capability of the method to obtain micrometer scale strain profiles/maps is shown.

Heavy metals bioaccumulation in selected tissues of red swamp crayfish: An easy tool for monitoring environmental contamination levels.

Science.gov (United States)

Goretti, E; Pallottini, M; Ricciarini, M I; Selvaggi, R; Cappelletti, D

2016-07-15

In this paper we explored the heavy metal bioaccumulation (Cd, Cu, Pb and Zn) in Procambarus clarkii, a crayfish recently suggested as a potential bioindicator for metals pollution in freshwater systems. The present study is focused on crayfishes populations caught in a heavily polluted industrial and in a reference sites (Central Italy), though the results are generalized with a thorough analysis of literature metadata. In agreement with the literature, the hepatopancreas (Hep, detoxification tissues) of the red swamp crayfish showed a higher concentration of heavy metals in comparison to the abdominal muscle (AbM, not detoxification tissues) in the sites under scrutiny. Hep/AbM concentration ratio was dependent on the specific metal investigated and on its sediment contamination level. Specifically we found that Hep/AbM ratio decreases as follows: Cd (11.7)>Cu (5.5)>Pb (3.6)>Zn (1.0) and Pb (4.34)>Cd (3.66)>Zn (1.69)>Cu (0.87) for the industrial and reference sites, respectively. The analysis of our bioaccumulation data as well as of literature metadata allowed to elaborate a specific contamination index (Toxic Contamination Index, TCI), dependent only on the bioaccumulation data of hepatopancreas and abdominal muscle. In the industrial site, TCI expressed values much higher than the unit for Cd and Cu, confirming that these metals were the main contaminants; in contrast for lower levels of heavy metals, as those observed in the reference site for Cu, Zn and Pb, the index provided values below unit. TCI is proposed as a useful and easy tool to assess the toxicity level of contaminated sites by heavy metals in the environmental management. Copyright © 2016. Published by Elsevier B.V.

Water quality characteristics and pollution levels of heavy metals in ...

African Journals Online (AJOL)

The main aim of this study was to assess the level of water quality of Lake Haiq, Ethiopia with respect to selected physical ... gated using standard analytical procedures. the level of the studied heavy metals (Pb, Cd, Cu and Zn) was determined using the .... no known discharge and hence used as reference site. Sampling ...

Development of technique for quantifying gamma emitters in metal waste. New technique of precise and automatic measurements for confirmation of clearance level of metal waste

International Nuclear Information System (INIS)

Hattori, Takatoshi

2002-01-01

A New technique of precise and automatic measurements of gamma emitters in metal waste has been developed using 3D non-contact shape measurement and monte-carlo calculation techniques in order to confirm that specific radioactivity level of metal waste satisfies the clearance level and furthermore the surface contamination level of the metal waste is below the legal standard level. The technique can give a calibration factor every measurement target automatically and realize an automatic correction for reduction of background count rate in gamma measurements due to self-shield effect of the measurement target. The accuracy of the present method has been made clear using mock-metal wastes with various types of shape, number and size. Assuming the goal of the detection limit for practical use is 25OBq in radioactivity, a concept of the practical gamma monitor has been designed so as to be able to confirm both the clearance level and surface contamination level simultaneously and to cope with the metal waste at a speed of 2-10 ton a day. (author)

Levels of trace metals in water and sediment from Tyume River and ...

African Journals Online (AJOL)

Levels of trace metals (Cd, Pb, Co, Zn Cu and Ni) were determined in water and sediment ... mg/l) and Pb (0.021 ± 0.004 to 0.035 ± 0.001 mg/l) were found in the river water, ... Key words: trace metals, water, sediment, farmland, Tyume River

Interaction between electrons and tunneling levels in metallic glasses

International Nuclear Information System (INIS)

Black, J.L.; Gyorffy, B.L.

1978-01-01

A simple model in which the conduction electrons of a metallic glass experience a local time-dependent potential due to two-level tunneling states is considered. The model exhibits interesting divergent behavior which is quite different from that predicted by an earlier ''s-d Kondo'' model

Levels of some heavy Metals in Cocoyam (Colocasia esculentum ...

African Journals Online (AJOL)

CEDEN

Dept. of Chemistry, University of Uyo, Akwa Ibom State, Nigeria. 3Dept. of Plant Science and Biotechnology. University of Port Harcourt, Nigeria. ABSTRACT: The levels of some heavy metals in soil samples and tubers of cocoyam. (Colocasia esculentum) grown on soil receiving paint wastes (PWS) has been investigated.

What Are Normal Metal Ion Levels After Total Hip Arthroplasty? A Serologic Analysis of Four Bearing Surfaces.

Science.gov (United States)

Barlow, Brian T; Ortiz, Philippe A; Boles, John W; Lee, Yuo-Yu; Padgett, Douglas E; Westrich, Geoffrey H

2017-05-01

The recent experiences with adverse local tissue reactions have highlighted the need to establish what are normal serum levels of cobalt (Co), chromium (Cr), and titanium (Ti) after hip arthroplasty. Serum Co, Cr, and Ti levels were measured in 80 nonconsecutive patients with well-functioning unilateral total hip arthroplasty and compared among 4 bearing surfaces: ceramic-on-ceramic (CoC); ceramic-on-polyethylene (CoP); metal-on-polyethylene (MoP), and dual mobility (DM). The preoperative and most recent University of California, Los Angeles (UCLA) and Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores were compared among the different bearing surfaces. No significant difference was found among serum Co and Cr levels between the 4 bearing surface groups (P = .0609 and P = .1577). Secondary analysis comparing metal and ceramic femoral heads demonstrated that the metal group (MoP, modular dual mobility (Stryker Orthopedics, Mahwah, NJ) [metal]) had significant higher serum Co levels compared with the ceramic group (CoC, CoP, MDM [ceramic]) (1.05 mg/L ± 1.25 vs 0.59 mg/L ± 0.24; P = .0411). Spearman coefficient identified no correlation between metal ion levels and patient-reported outcome scores. No serum metal ion level differences were found among well-functioning total hip arthroplasty with modern bearing couples. Significantly higher serum Co levels were seen when comparing metal vs ceramic femoral heads in this study and warrants further investigation. Metal ion levels did not correlate with patient-reported outcome measures. Copyright © 2016 Elsevier Inc. All rights reserved.

Energy level alignment at hybridized organic-metal interfaces from a GW projection approach

Science.gov (United States)

Chen, Yifeng; Tamblyn, Isaac; Quek, Su Ying

Energy level alignments at organic-metal interfaces are of profound importance in numerous (opto)electronic applications. Standard density functional theory (DFT) calculations generally give incorrect energy level alignments and missing long-range polarization effects. Previous efforts to address this problem using the many-electron GW method have focused on physisorbed systems where hybridization effects are insignificant. Here, we use state-of-the-art GW methods to predict the level alignment at the amine-Au interface, where molecular levels do hybridize with metallic states. This non-trivial hybridization implies that DFT result is a poor approximation to the quasiparticle states. However, we find that the self-energy operator is approximately diagonal in the molecular basis, allowing us to use a projection approach to predict the level alignments. Our results indicate that the metallic substrate reduces the HOMO-LUMO gap by 3.5 4.0 eV, depending on the molecular coverage/presence of Au adatoms. Our GW results are further compared with those of a simple image charge model that describes the level alignment in physisorbed systems. Syq and YC acknowledge Grant NRF-NRFF2013-07 and the medium-sized centre program from the National Research Foundation, Singapore.

Detecting the heavy metal tolerance level in ectomycorrhizal fungi in vitro

Energy Technology Data Exchange (ETDEWEB)

Ray, P.; Tiwari, R.; Reddy, U.G.; Adholeya, A. [India Habitat Center, New Delhi (India). Energy & Resources Institute

2005-04-01

Eight isolates of ectomycorrhizal fungi namely, Laccaria fraterna (EM-1083), Laccaria laccata (EM-1191), Pisolithus tinctorius (EM-1081), Pisolithus tinctorius (EM-1293), Scleroderma cepa (EM-1233), Scleroderma flavidum (EM-1235), Scleroderma verucosum, (EM-1283) and Hysterangium incarceratum (EM-1185) were grown on specially designed cocktail media prepared by adding various concentrations of different heavy metals namely Al, As, Cd, Cr, Ni and Pb. The heavy metals were selected keeping in view their relative abundance in coal ash and potential toxicity. The fungal isolates were grown on such designed cocktail media. The colony diameter was used for the measurement of the fungal growth. Total heavy metal accumulated in the mycelia was assayed by atomic absorption spectrophotometry. In relation to metal tolerance ability in general, Hysterangium incarceratum (EM-1185) showed maximum tolerance with respect to growth, Laccaria fraterna (EM-1083) and Pisolithus tinctorius (EM-1293) also showed considerable tolerance to the heavy metals tested. In relation to metal uptake in particular, Pisolithus tinctorius (EM-1293), has reported maximum uptake of Al (34642.58 ppm), Cd (302.12 ppm) and Pb (3501.96 ppm). In Laccaria fraterna (EM-1083), As (130.57 ppm) and Cr (402.38 ppm) uptake was recorded maximum; and Hysterangium incarceratum (EM-1185) has recorded maximum Ni (2648.59 ppm) uptake among the three suitable isolates documented here.

Microstructure, Properties and Atomic Level Strain in Severely Deformed Rare Metal Niobium

Directory of Open Access Journals (Sweden)

Lembit KOMMEL

2012-12-01

Full Text Available The mechanical and physical properties relationship from atomic level strain/stress causes dislocation density and electrical conductivity relationship, as well as crystallites deformation and hkl-parameter change in the severely deformed pure refractory rare metal Nb at ambient temperature and during short processing times. The above mentioned issues are discussed in this study. For ultrafine-grained and nanocrystalline microstructure forming in metal the equal-channel angular pressing and hard cyclic viscoplastic deformation were used. The flat deformation and heat treatment at different parameters were conducted as follows. The focused ion beam method was used for micrometric measures samples manufacturied under nanocrystalline microstructure study by transmission electron microscope. The microstructure features of metal were studied under different orientations by X-ray diffraction scattering method, and according to the atomic level strains, dislocation density, hkl-parameters and crystallite sizes were calculated by different computation methods. According to results the evolutions of atomic level strains/stresses, induced by processing features have great influence on the microstructure and advanced properties forming in pure Nb. Due to cumulative strain increase the tensile stress and hardness were increased significantly. In this case the dislocation density of Nb varies from 5.0E+10 cm–2 to 2.0E+11 cm–2. The samples from Nb at maximal atomic level strain in the (110 and (211 directions have the maximal values of hkl-parameters, highest tensile strength and hardness but minimal electrical conductivity. The crystallite size was minimal and relative atomic level strain maximal in (211 orientation of crystal. Next, flat deformation and heat treatment increase the atomic level parameters of severely deformed metal.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3091

Impact of the global economic crisis on metal levels in particulate matter (PM) at an urban area in the Cantabria Region (Northern Spain)

International Nuclear Information System (INIS)

Arruti, A.; Fernandez-Olmo, I.; Irabien, A.

2011-01-01

Air pollution by particulate matter is well linked with anthropogenic activities; the global economic crisis that broke out in the last year may be a proper indicator of this close relationship. Some economic indicators show the regional effects of the crisis on the Cantabria Region. The present work aims to evaluate the impact of the economic crisis on PM10 levels and composition at the major city of the region, Santander. Some metals linked to anthropogenic activities were measured at Santander and studied by Positive Matrix Factorization; this statistical analysis allowed to identify three main factors: urban background, industrial and molybdenum-related factor. The main results show that the temporal trend of the levels of the industrial tracers found in the present study are well agree with the evolution of the studied economic indicators; nevertheless, the urban background tracers and PM10 concentration levels are not well correlated with the studied economic indicators. - Highlights: → The impact of the crisis is higher on the PM-bound metal levels than on the PM levels. → The crisis effects on the trace metal associated to the urban background are negligible. → The temporal trend of the industrial trace metals levels and the studied economic indicators is similar. → The crisis effects on the main industrial tracer levels in PM2.5 and PM10 are similar. - The study presents an evaluation of the economic crisis impact on PM levels and composition at a coastal urban area in the Region of Cantabria (Northern Spain).

Association of urinary metals levels with type 2 diabetes risk in coke oven workers

International Nuclear Information System (INIS)

Liu, Bing; Feng, Wei; Wang, Jing; Li, Yaru; Han, Xu; Hu, Hua; Guo, Huan; Zhang, Xiaomin; He, Meian

2016-01-01

Background: Studies indicated that occupationally exposed to metals could result in oxidative damage and inflammation and increase cardiovascular diseases risk. However, epidemiological studies about the associations of metals exposure with diabetes risk among coke oven workers were limited. Objectives: This study aims to investigate the potential associations of 23 metals levels with the risk of diabetes among coke oven workers. Methods: The analysis was conducted in a cross-sectional study including 1493 participants. Urinary metals and urinary polycyclic aromatic hydrocarbons (PAHs) metabolites levels were determined by inductively coupled plasma mass spectrometer and gas chromatograph-mass spectrometer respectively. Multivariate logistic regression was used to investigate the associations of urinary metal levels with diabetes risk with adjustment for potential confounding factors including gender, age, BMI, education, smoking, drinking, physical activity, hypertension, hyperlipidemia and urinary PAHs metabolites levels. Results: Compared with the normoglycemia group, the levels of urinary copper, zinc, arsenic, selenium, molybdenum, and cadmium were significantly higher in the diabetes group (all p < 0.05). Participants with the highest tertile of urinary copper and zinc had 2.12 (95%CI: 1.12–4.01) and 5.43 (95%CI: 2.61–11.30) fold risk of diabetes. Similar results were found for hyperglycemia risk. Besides, participants with the highest tertile of manganese, barium, and lead had 1.65(1.22–2.23), 1.60(1.19–2.16) and 1.45(1.05–1.99) fold risk of hyperglycemia when compared with the lowest tertlie. Conclusion: The results indicated that the urinary copper and zinc levels were positively associated with the risk of diabetes and hyperglycemia among coke oven workers. Urinary manganese, barium and lead levels were also associated with increased risk of hyperglycemia independently of other traditional risk factors. These findings need further validation

Heavy Metals Levels in Fish Samples from North Central Nigerian ...

African Journals Online (AJOL)

MBI

2014-12-24

Dec 24, 2014 ... Most aquatic organisms are capable of accumulating heavy metals to concentrations ... This indicates that the fish samples could be used to monitor Mn and Cr pollution levels .... was carried out to remove any organic plastic.

Nuclide, metal and non metal levels in percolated water from soils fertilized with phosphogypsum

International Nuclear Information System (INIS)

Silva, Camilla Bof; Knupp, Eliana Aparecida Nonato; Palmieri, Helena E.L.; Jacomino, Vanusa Maria Feliciano; Taddei, Maria Helena; Ciqueira, Maria Celia

2009-01-01

Systematic generation of residues is more and more worrying in today.s world; adequate storage and reutilization are of great importance. Since generation of residues has become impossible to avoid, the possibility of reuse must be studied and researched. An example of these residues is phosphogypsum, which is generated in phosphoric acid production at the rate of around 4.8 tons for each ton of phosphoric acid produced. Many studies seek to reuse phosphogypsum in agriculture as a source of calcium and sulfur, potassium or aluminum, especially in soils from Brazil's cerrado regions. Though phosphogypsum is mainly composed of dehydrated calcium sulfate, it can have high levels of heavy metals, non metals (As and Se), fluorides and natural radionuclides. Thus, its uncontrolled use as a soil conditioner can lead to contamination of underground water. (author)

Physico-chemical characteristics and Heavy metal levels in Drinking ...

African Journals Online (AJOL)

Physico-chemical characteristics and Heavy metal levels in Drinking Water sources in Sokoto metropolis in North-western Nigeria. ... Tap water samples had similar conductivity values (180 -190μS/m), sachet water samples had conductivity values ranging from 80μS/m to 260μS/m while well water samples had highest ...

Iron plaque formation and heavy metal uptake in Spartina alterniflora at different tidal levels and waterlogging conditions.

Science.gov (United States)

Xu, Yan; Sun, Xiangli; Zhang, Qiqiong; Li, Xiuzhen; Yan, Zhongzheng

2018-05-30

Tidal flat elevation in the estuarine wetland determines the tidal flooding time and flooding frequency, which will inevitably affect the formation of iron plaque and accumulations of heavy metals (HMs) in wetland plants. The present study investigated the formation of iron plaque and HM's (copper, zinc, lead, and chromium) accumulation in S. alterniflora, a typical estuarine wetland species, at different tidal flat elevations (low, middle and high) in filed and at different time (3, 6, 9, 12 h per day) of waterlogging treatment in greenhouse conditions. Results showed that the accumulation of copper, zinc, lead, and chromium in S. alterniflora was proportional to the exchangeable fraction of these metals in the sediments, which generally increased with the increase of waterlogging time, whereas the formations of iron plaque in roots decreased with the increase of waterlogging time. Under field conditions, the uptake of copper and zinc in the different parts of the plants generally increased with the tidal levels despite the decrease in the metals' exchangeable fraction with increasing tidal levels. The formation of iron plaque was found to be highest in the middle tidal positions and significantly lower in low and high tidal positions. Longer waterlogging time increased the metals' accumulation but decreased the formation of iron plaque in S. alterniflora. The binding of metal ions on iron plaque helped impede the uptake and accumulation of copper and chromium in S. alterniflora. Copyright © 2018 Elsevier Inc. All rights reserved.

The levels of heavy metals in water and all aquatic in Ismailia canal, (Egypt) compared with the international permissible limits and accumulative studies for these metals in biota

International Nuclear Information System (INIS)

Saleh, H.M.; Moloukhia, H.; Belacy, N.; Abd El-Rahman, G.A.

2011-01-01

The concentration of Pb, Cd, Cu, Zu, Ni, Fe and Mn were determined in water, and in different organs of fishes, bivalves, snails and plants in Ismailia canal, Egypt. Moreover, accumulation of the investigated heavy metals by aquatic biota in Ismailia canal and the concentration factor values for this accumulation were calculated to qualify the degree of pollution and compare these levels with the international permissible limits. Results showed that Pb, Cd, Cu and Zn were exceeded the permissible limits especially in the industrial area of Abu- Zaabal, Kalubia governorate. The relative order of heavy metal levels in the canal water was: Fe>Mn>Pb>Zn>Ni>Cd>Cu.Accumulation of heavy metals by the aquatic biota was determined. The accumulation of heavy metals by common snails, namely physa acuta and biomphalaria alexandrina and the bivalve oyster Caelatura (caelatura) companyoi was found mainly in the edible parts (soft parts), whereas, the accumulation by their shells, which are mainly formed of calcium carbonate was via adsorption and surface complexation, since all the accumulated heavy metals were released by adding 0.1 M HCl for few minutes . Moreover, accumulation of heavy metals by common plants namely water hyacinth plant (Eichhornia crassipes) and freshwater weeds were determined. It was found that the accumulation of heavy metals was higher in roots than in leaves. On the other hand, the accumulation of heavy metals by common fish namely, Oreochromis niloticus (Nile Tilapia) was measured in its organs : muscles, liver, gills and gonads. It was found that there is variation of distribution of heavy metals among fish organs. Since the high accumulation of heavy metals among the investigated biota, they can be used as biological indicator for pollution of heavy metals in aquatic ecosystem . The average values and standard deviation for all measurements were determined. Data obtained were compared with the permissible concentrations of the environmental protection

[Pollution Level and Health Risk Assessment of Heavy Metals in Atmospheric PM₂.₅ in Nanjing Before and After the Youth Olympic Games].

Science.gov (United States)

Zhang, Heng; Zhou, Zi-qiang; Zhao, Hai-yan; Xiong, Zheng-qin

2016-01-15

The influence of human activities on the atmospheric environment has attracted people's attention. This study reported the dynamic changes in PM₂.₅ concentration, its heavy metal compositions and health risk assessment from April to September, 2014 in Nanjing when the Youth Olympic Games ( YOG) was held. The results showed that the mass levels of PM₂.₅ ranged from 26.39 to 80.31 µg · m⁻³ from April to September. The mass levels of PM₂.₅ met the level II standard of ambient air quality in China (24 h average concentration, 75 µg · m⁻³) in months of April, May and July while met the level I standard (24 h average concentration, 35 µg · m⁻³) in August during the YOG. The average mass concentration of PM₂.₅ reached 76.14 µg · m⁻¹ after the YOG, showing resilience of air pollution. The variations of heavy metals were not consistent with each other throughout the observation period. Principal component analysis indicated that emission sources significantly affected the variations of PM₂.₅ and its heavy metals. PM₂.₅ and all of the heavy metals decreased to their minimum values during the YOG, indicating the effectiveness of those temporary measures for reducing atmospheric pollutant before and during the YOG. The health risks of Cd, Cu, Ni and Pb in PM₂.₅ via breathing and dermal contact exposure were all within the acceptable ranges, but potential carcinogenic risk existed for Cr in PM₂.₅. There was potential non-carcinogenic health risk for adult males via breathing of Mn and greater non-carcinogenic health risk for children via dermal contact exposures to all these 6 heavy metals.

Children exposure to trace levels of heavy metals at the north zone of Kifissos River

International Nuclear Information System (INIS)

Evrenoglou, Lefkothea; Partsinevelou, Sofia Aikaterini; Stamatis, Panagiotis; Lazaris, Andreas; Patsouris, Eustratios; Kotampasi, Chrysanthi; Nicolopoulou-Stamati, Polyxeni

2013-01-01

This study evaluates the exposure level of primary school children at three different towns in northern Attica, near the banks of the Kifissos River, defining referential values of toxic heavy metals. Concentrations of five toxic metals (arsenic, cadmium, mercury, lead and nickel) were analyzed in water samples from the Kifissos River as well as in the scalp hair of children aged 11 to 12 years old living in the study area. Chronic low-level toxicity of lead and cadmium came into view in recent years as a problem of our civilization. Exposure to concentrations of arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb) poses a potential threat to humans and can cause effects on children's renal and dopaminergic systems without clear evidence of a threshold, a fact that reinforces the need to control all the potential heavy metal emissions into the environment in order to protect children's health. The results were analyzed with the IBM SPSS Statistics 20 for Windows. The possible influence of sex and area was examined. Statistical differences were observed by t-test between the log-transformed hair concentrations of lead (p = 0.021), arsenic (p = 0.016) and nickel (p = 0.038) in children's scalp hair from the municipalities of Kifisia and Kryoneri. ANOVA one-way test confirmed the difference of Pb concentration in hair between girls and boys from the municipality of Kifisia (p = 0.038). The t-test confirms the difference of heavy metal concentrations in river samples between the municipalities Kifisia and Philadelphia in comparison with the samples from Kryoneri. The observations suggest that children living at the municipality of Kifisia are exposed to higher concentrations of heavy metals than the others. Despite all the confounding factors, hair can be used as a biomarker in order to determine the exposure to heavy metals, according to standardized protocols. - Highlights: ► The study area was the north zone of the Kifissos River which is characterized by

Children exposure to trace levels of heavy metals at the north zone of Kifissos River

Energy Technology Data Exchange (ETDEWEB)

Evrenoglou, Lefkothea [Department of Sanitary Engineering and Environmental Health, National School of Public Health, 11521 Athens (Greece); Partsinevelou, Sofia Aikaterini, E-mail: partsi@hol.gr [Department of Sanitary Engineering and Environmental Health, National School of Public Health, 11521 Athens (Greece); Stamatis, Panagiotis; Lazaris, Andreas; Patsouris, Eustratios; Kotampasi, Chrysanthi [Department of Pathology, Medical School of Athens,11527 Athens (Greece); Nicolopoulou-Stamati, Polyxeni, E-mail: pnicolopouloustamati@gmail.com [Department of Pathology, Medical School of Athens,11527 Athens (Greece)

2013-01-15

This study evaluates the exposure level of primary school children at three different towns in northern Attica, near the banks of the Kifissos River, defining referential values of toxic heavy metals. Concentrations of five toxic metals (arsenic, cadmium, mercury, lead and nickel) were analyzed in water samples from the Kifissos River as well as in the scalp hair of children aged 11 to 12 years old living in the study area. Chronic low-level toxicity of lead and cadmium came into view in recent years as a problem of our civilization. Exposure to concentrations of arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb) poses a potential threat to humans and can cause effects on children's renal and dopaminergic systems without clear evidence of a threshold, a fact that reinforces the need to control all the potential heavy metal emissions into the environment in order to protect children's health. The results were analyzed with the IBM SPSS Statistics 20 for Windows. The possible influence of sex and area was examined. Statistical differences were observed by t-test between the log-transformed hair concentrations of lead (p = 0.021), arsenic (p = 0.016) and nickel (p = 0.038) in children's scalp hair from the municipalities of Kifisia and Kryoneri. ANOVA one-way test confirmed the difference of Pb concentration in hair between girls and boys from the municipality of Kifisia (p = 0.038). The t-test confirms the difference of heavy metal concentrations in river samples between the municipalities Kifisia and Philadelphia in comparison with the samples from Kryoneri. The observations suggest that children living at the municipality of Kifisia are exposed to higher concentrations of heavy metals than the others. Despite all the confounding factors, hair can be used as a biomarker in order to determine the exposure to heavy metals, according to standardized protocols. - Highlights: ► The study area was the north zone of the Kifissos River which is

Energy-level alignment at metal-organic and organic-organic interfaces

NARCIS (Netherlands)

Veenstra, Sjoerd; Jonkman, H.T.

2003-01-01

This article reports on the electronic structure at interfaces found in organic semiconductor devices. The studied organic materials are C-60 and poly (para-phenylenevinylene) (PPV)-like oligomers, and the metals are polycrystalline Au and Ag. To measure the energy levels at these interfaces,

Alleviation of fermi-level pinning effect at metal/germanium interface by the insertion of graphene layers

International Nuclear Information System (INIS)

Baek, Seung-heon Chris; Seo, Yu-Jin; Oh, Joong Gun; Albert Park, Min Gyu; Bong, Jae Hoon; Yoon, Seong Jun; Lee, Seok-Hee; Seo, Minsu; Park, Seung-young; Park, Byong-Guk

2014-01-01

In this paper, we report the alleviation of the Fermi-level pinning on metal/n-germanium (Ge) contact by the insertion of multiple layers of single-layer graphene (SLG) at the metal/n-Ge interface. A decrease in the Schottky barrier height with an increase in the number of inserted SLG layers was observed, which supports the contention that Fermi-level pinning at metal/n-Ge contact originates from the metal-induced gap states at the metal/n-Ge interface. The modulation of Schottky barrier height by varying the number of inserted SLG layers (m) can bring about the use of Ge as the next-generation complementary metal-oxide-semiconductor material. Furthermore, the inserted SLG layers can be used as the tunnel barrier for spin injection into Ge substrate for spin-based transistors.

Review of metal-matrix encapsulation of solidified radioactive high-level waste

International Nuclear Information System (INIS)

Jardine, L.J.; Steindler, M.J.

1978-05-01

Literature describing previous and current work on the encapsulation of solidified high-level waste forms in a metal matrix was reviewed. Encapsulation of either stabilized calcine pellets or glass beads in alloys by casting techniques was concluded to be the most developed and direct approach to fabricating solid metal-matrix waste forms. Further characterizations of the physical and chemical properties of metal-matrix waste forms are still needed to assess the net attributes of metal-encapsulation alternatives. Steady-state heat transfer properties of waste canisters in air and water environments were calculated for four reference waste forms: (1) calcine, (2) glass monoliths, (3) metal-encapsulated calcine, and (4) metal-encapsulated glass beads. A set of criteria for the maximum allowable canister centerline and surface temperatures and heat generation rates per canister at the time of shipment to a Federal repository was assumed, and comparisons were made between canisters of these reference waste forms of the shortest time after reactor discharge that canisters could be filled and the subsequent ''interim'' storage times prior to shipment to a Federal repository for various canister diameters and waste ages. A reference conceptual flowsheet based on existing or developing technology for encapsulation of stabilized calcine pellets is discussed. Conclusions and recommendations are presented

Surface core-level shifts for simple metals

DEFF Research Database (Denmark)

Aldén, Magnus; Skriver, Hans Lomholt; Johansson, Börje

1994-01-01

screening, whereby a SCLS becomes equivalent to the surface segregation energy of a core-ionized atom, a quantity we obtain by separate bulk and surface impurity calculations. The results are in good agreement with experiment in most of those cases where the data originates from single-crystal measurements....... We discuss the surface shifts of the electrostatic potentials and the band centers in order to trace the microscopic origin of the SCLS in the simple metals and find that the anomalous subsurface core-level shifts in beryllium are caused by charge dipoles, which persist several layers into the bulk...

The possibility to use the Eichhornia crassipes plant in the estimation of heavy metal levels in the Almendares river, Havana Cuba

International Nuclear Information System (INIS)

Columbie, I.; Olivares, S.; Lima, L.; De La Rosa, D.

2005-01-01

The possibility to use the Eichhornia crassipes plant in the estimation of heavy metal levels in the Almendares river were evaluated in this paper. Concentration of Cd, Pb, Zn, Cu, Co, Cr and Ni in macrophyte Eichhornia crassipes (Water Jacint) were evaluated at 15 stations during the dry season of 2003 and 2004. In Eichhornia crassipes roots and in the bioavailable fraction of the sediments followed the some spatial trend, showing elevated metal concentration's at the some stations. Highly significant correlation were found for these elements in Eichhornia crassipes roots and in the organic fraction of the sediments, which means that the concentrations of these elements in Eichhornia crassipes are indicative of the bioavailable concentrations in sediments. Three main sources of heavy metal pollution were identified in the basin due to the high concentration of most of the studied metals in the sampling stations, the secondary smelter Antillana de Acero, an important provincial landfill in the street 100 and the Mordazo tributary river. The obtained results show that Eichhornia crassipes could be an interesting monitor of the heavy metal pollution in Almendares River

34 level of heavy metals in soil and some vegetables irrigated

African Journals Online (AJOL)

Level of lead (Pb) ranged from ... human health are mercury, cadmium, lead, arsenic, ... and store these nutrients. ... through the displacement of essential metals from their native binding sites or through ligand interactions (Stiborova, 1988).

Solubility of heavy metals added to MSW

International Nuclear Information System (INIS)

Lo, H.M.; Lin, K.C.; Liu, M.H.; Pai, T.Z.; Lin, C.Y.; Liu, W.F.; Fang, G.C.; Lu, C.; Chiang, C.F.; Wang, S.C.; Chen, P.H.; Chen, J.K.; Chiu, H.Y.; Wu, K.C.

2009-01-01

This paper aims to investigate the six heavy metal levels (Cd, Cr, Cu, Pb, Ni and Zn) in municipal solid waste (MSW) at different pHs. It intends to provide the baseline information of metals solubility in MSW co-disposed or co-digested with MSW incinerator ashes in landfill or anaerobic bioreactors or heavy metals contaminated in anaerobic digesters. One milliliter (equal to 1 mg) of each metal was added to the 100 ml MSW and the batch reactor test was carried out. The results showed that higher HNO 3 and NaOH were consumed at extreme pH of 1 and 13 compared to those from pH 2 to 11 due to the comparably higher buffer capacity. Pb was found to have the least soluble level, highest metal adsorption (%) and highest partitioning K d (l g -1 ) between pH 3 and 12. In contrast, Ni showed the highest soluble level, lowest metal adsorption (%) and lowest K d (l g -1 ) between pH 4 and 12. Except Ni and Cr, other four metals seemed to show the amphibious properties as comparative higher solubility was found in the acidic and basic conditions

Solubility of heavy metals added to MSW

Energy Technology Data Exchange (ETDEWEB)

Lo, H.M. [Department of Environmental Engineering and Management, Chaoyang University of Technology, 168 Gifong E. Road, Wufong, Taichung County 41349, Taiwan (China)], E-mail: hmlo@cyut.edu.tw; Lin, K.C. [Department of Occupational Safety and Health, Chung Shan Medical University, 110, Sec. 1, Jiangguo N. Rd., Taichung 402, Taiwan (China); Liu, M.H.; Pai, T.Z. [Department of Environmental Engineering and Management, Chaoyang University of Technology, 168 Gifong E. Road, Wufong, Taichung County 41349, Taiwan (China); Lin, C.Y. [Department of Soil and Water Conservation, Chung Hsing University, 250 Kuokuang Road, Taichung 402, Taiwan (China); Liu, W.F. [Department of Electronical Engineering, Feng Chia University, 100 Wenhwa Road, Taichung 407, Taiwan (China); Fang, G.C. [Department of Environmental Engineering, Hungkuang University, 34 Chung-Chie Road, Sha Lu, Taichung 433, Taiwan (China); Lu, C. [Department of Environmental Engineering, Chung Hsing University, 250 Kuokuang Road, Taichung 402, Taiwan (China); Chiang, C.F. [Department of Health Risk Management, China Medical University, No. 91 Hsueh-Shih Road, Taichung 40402, Taiwan (China); Wang, S.C.; Chen, P.H.; Chen, J.K.; Chiu, H.Y.; Wu, K.C. [Department of Environmental Engineering and Management, Chaoyang University of Technology, 168 Gifong E. Road, Wufong, Taichung County 41349, Taiwan (China)

2009-01-15

This paper aims to investigate the six heavy metal levels (Cd, Cr, Cu, Pb, Ni and Zn) in municipal solid waste (MSW) at different pHs. It intends to provide the baseline information of metals solubility in MSW co-disposed or co-digested with MSW incinerator ashes in landfill or anaerobic bioreactors or heavy metals contaminated in anaerobic digesters. One milliliter (equal to 1 mg) of each metal was added to the 100 ml MSW and the batch reactor test was carried out. The results showed that higher HNO{sub 3} and NaOH were consumed at extreme pH of 1 and 13 compared to those from pH 2 to 11 due to the comparably higher buffer capacity. Pb was found to have the least soluble level, highest metal adsorption (%) and highest partitioning K{sub d} (l g{sup -1}) between pH 3 and 12. In contrast, Ni showed the highest soluble level, lowest metal adsorption (%) and lowest K{sub d} (l g{sup -1}) between pH 4 and 12. Except Ni and Cr, other four metals seemed to show the amphibious properties as comparative higher solubility was found in the acidic and basic conditions.

Evidence for declining levels of heavy-metals in the Severn Estuary and Bristol Channel, U.K. and their spatial distribution in sediments

International Nuclear Information System (INIS)

Duquesne, Sabine; Newton, Lyn C.; Giusti, Lorenzo; Marriott, Susan B.; Staerk, Hans-Joachim; Bird, David J.

2006-01-01

Levels of heavy-metals (Cd, Cu, Cr, Ni, Pb and Zn) in suspended particulate and in surface and subsurface sediments were determined at seven locations in the Severn Estuary and Bristol Channel. Sediment metal concentrations were highest at sites close to industrial centres but levels have decreased significantly over the last 30 years so that they are now close to, or meet, environmental quality guidelines. The greatest metal concentrations in deposited sediments were usually associated with the finest particulates at locations with muddy sediments, but this was not always true at sites with predominantly sandy sediments. The metals bound to suspended particulates at all sites were remarkably consistent, presumably reflecting the mixing capacity of this macro-tidal estuary. The re-exposure of older, more contaminated sediments could explain the observed differences between deposited and suspended material. Sediment redistribution due to strong seasonal currents might also explain the differences between winter and summer samples. - Heavy-metal contamination in Severn Estuary sediments is declining but shows seasonal variation and depends on location and sediment type

Metal-induced stress in bivalves living along a gradient of Cd contamination: relating sub-cellular metal distribution to population-level responses

International Nuclear Information System (INIS)

Perceval, Olivier; Couillard, Yves; Pinel-Alloul, Bernadette; Giguere, Anik; Campbell, Peter G.C.

2004-01-01

The use of biomarkers to assess the impacts of contaminants on aquatic ecosystems has noticeably increased over the past few years. Few of these studies, however, have contributed to the prediction of ecologically significant effects (i.e., at the population or community levels). The present field study was designed to evaluate the potential of metallothionein (MT) and sub-cellular metal partitioning measurements for predicting toxic effects at higher levels of the biological organization in freshwater bivalves (Pyganodon grandis) chronically exposed to Cd. For that purpose, we quantitatively sampled P. grandis populations in the littoral zone of nine lakes on the Precambrian Canadian Shield during two consecutive summers (1998 and 1999); lakes were characterized by contrasting Cd levels but similar trophic status. We tested relationships between the population status of P. grandis (i.e., growth parameters, density, biomass, secondary production, turnover ratio and cumulative fecundity) and (i) ambient Cd concentrations, (ii) sub-organismal responses (MT concentrations in the gill cytosol of individuals and Cd concentrations in three metal-ligand pools identified as M-HMW, the high molecular weight pool, M-MT, the metallothionein-like pool and M-LMW, the low molecular weight pool) and (iii) ecological confounding factors (food resources, presence of host fishes for the obligatory parasitic larval stage of P. grandis). Our results show that littoral density, live weight, dry viscera biomass, production and cumulative fecundity decreased with increasing concentrations of the free-cadmium ion in the environment (Pearson's r ranging from -0.63 to -0.78). On the other hand, theoretical maximum shell lengths (L ∞ ) in our populations were related to both the dissolved Ca concentration and food quality (sestonic C and N concentrations). Overall, Cd concentrations in the gill cytosolic HMW pool of the individual molluscs were the biomarker response that was most

Metal accumulation in the smooth toadfish, Tetractenos glaber, in estuaries around Sydney, Australia

International Nuclear Information System (INIS)

Alquezar, Ralph; Markich, Scott J.; Booth, David J.

2006-01-01

This study determined the metal levels in sediments and tissues of a common estuarine fish, Tetractenos glaber (smooth toadfish), from two metal contaminated and two reference estuaries near Sydney, Australia. Metal levels were highest in sediments and fish from contaminated estuaries. Gonads contained the highest metal levels followed by muscle, gill and liver. Metal accumulation was gender-dependant (e.g. male gonads were >20 times higher in As than females; female gills were >30 times higher than males for Pb). Cadmium, Pb and Ni levels in fish tissues reflected sediment levels, indicating sediment and/or dietary metal uptake. Levels of As, Co, Cd and Pb in gills showed similar patterns to other tissues, suggesting that metals may have been taken up by gills through contaminated water. Similar metal patterns in tissues and sediments suggest more than one uptake pathway. This study indicates that multiple factors influence metal accumulation in fish. - Metal levels in toadfish tissues reflect sediment metal levels and show gender differences

Trace metals and vitamin levels in Nigerian patients with sensory ...

African Journals Online (AJOL)

The significance of the higher levels of magnesium in the patients is unclear and needs further investigation. Further studies with larger sample sizes are needed to confirm this observation. Keywords: ataxia, trace metals, vitamins, Nigerians Nigerian Journal of Health and Biomedical Sciences Vol. 4(2) 2005: 156–160 ...

Subcellular partitioning profiles and metallothionein levels in indigenous clams Moerella iridescens from a metal-impacted coastal bay

Energy Technology Data Exchange (ETDEWEB)

Wang, Zaosheng, E-mail: zswang@iue.ac.cn [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, 1799 Jimei Boulevard, Xiamen 361021 (China); State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Feng, Chenglian; Ye, Chun [State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); Wang, Youshao [State Key Laboratory of Tropical Oceanography, South China Sea Institute of Oceanology, Chinese Academy of Sciences, Guangzhou 510301 (China); Yan, Changzhou, E-mail: czyan@iue.ac.cn [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, 1799 Jimei Boulevard, Xiamen 361021 (China); Li, Rui; Yan, Yijun; Chi, Qiaoqiao [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, 1799 Jimei Boulevard, Xiamen 361021 (China)

2016-07-15

Highlights: • Subcellular partitioning profile of metals were investigated in biomonitor organism. • Cu, Zn and Cd levels in main fraction of HSP increase along accumulation gradients. • Despite MTs as the major binding pool, detoxification of Cd and Pb was incomplete. • Induced MTs were sequentially correlated with Cu, Zn and Cd levels in HSP fraction. • Intracellular metal fates highlighted the metabolic availability within organism. - Abstract: In this study, the effect of environmental metal exposure on the accumulation and subcellular distribution of metals in the digestive gland of clams with special emphasis on metallothioneins (MTs) was investigated. Specimens of indigenous Moerella iridescens were collected from different natural habitats in Maluan Bay (China), characterized by varying levels of metal contamination. The digestive glands were excised, homogenized and six subcellular fractions were separated by differential centrifugation procedures and analyzed for their Cu, Zn, Cd and Pb contents. MTs were quantified independently by spectrophotometric measurements of thiols. Site-specific differences were observed in total metal concentrations in the tissues, correlating well with variable environmental metal concentrations and reflecting the gradient trends in metal contamination. Concentrations of the non-essential Cd and Pb were more responsive to environmental exposure gradients than were tissue concentrations of the essential metals, Cu and Zn. Subcellular partitioning profiles for Cu, Zn and Cd were relatively similar, with the heat-stable protein (HSP) fraction as the dominant metal-binding compartment, whereas for Pb this fraction was much less important. The variations in proportions and concentrations of metals in this fraction along with the metal bioaccumulation gradients suggested that the induced MTs play an important role in metal homeostasis and detoxification for M. iridescens in the metal-contaminated bay. Nevertheless

Combined effects of temperature changes and metal contamination at different levels of biological organization in yellow perch

International Nuclear Information System (INIS)

Grasset, Julie; Ollivier, Élodie; Bougas, Bérénice; Yannic, Glenn; Campbell, Peter G.C.; Bernatchez, Louis; Couture, Patrice

2016-01-01

Highlights: • Yellow perch were exposed to a combination of heat and metal (Cd or Ni) stress. • Kidney metal accumulation was greatly enhanced at higher temperatures. • Elevated temperatures negatively affected several indicators of condition and metabolic capacities. • Exposure to Ni stimulated gonad development. • Metal stress modified the normal response of antioxidant capacities and apoptosis to heat stress. - Abstract: In this study, we measured the effects of temperature (9 °C, 20 °C, and 28 °C), metal contamination (cadmium and nickel) and their interaction on yellow perch (Perca flavescens) using liver enzymatic and transcriptomic endpoints and biometric indices. Kidney metal concentrations increased with a rise of temperature. The biometric indices analysed (Fulton condition factor, pyloric cæca, hepatosomatic and gonadosomatic indices) generally decreased with an increase of temperature but not with metal contamination. At the enzymatic level, the activity of superoxide dismutase (SOD), involved in antioxidant response, was affected by both temperature and metal contamination, whereas the activity of glucose-6-phosphate dehydrogenase (G6PDH), involved in energy accumulation but also in antioxidant response, was only affected by metal exposure. The response of perch to the stressors at the transcriptional level differed from the metabolic response. In particular, the transcription level of the cco and g6pdh genes sharply decreased with increasing temperature, while the activities of the corresponding enzymes remained stable. The normal response of the transcription level of the apoptotic gene (diablo) to heat stress was also altered in metal-contaminated fish. The combination of metal and temperature stresses also modified the response of antioxidant metabolism induced by these stressors individually. This study contributes to a better understanding of the influences of natural stressors like temperature on biomarkers commonly used in

Combined effects of temperature changes and metal contamination at different levels of biological organization in yellow perch

Energy Technology Data Exchange (ETDEWEB)

Grasset, Julie [Institut National de la Recherche Scientifique (INRS), Centre Eau Terre Environnement, 490 de la Couronne, Québec, QC G1K 9A9 (Canada); Institut de Biologie Intégrative et des Systèmes (IBIS), Université Laval, Québec, QC G1V 0A6 (Canada); Ollivier, Élodie [Institut National de la Recherche Scientifique (INRS), Centre Eau Terre Environnement, 490 de la Couronne, Québec, QC G1K 9A9 (Canada); Bougas, Bérénice [Institut de Biologie Intégrative et des Systèmes (IBIS), Université Laval, Québec, QC G1V 0A6 (Canada); Yannic, Glenn [Laboratoire d’Écologie Alpine, UMR CNRS 5553, Université de Savoie Mont Blanc, 73376 Le Bourget-du-lac (France); Campbell, Peter G.C. [Institut National de la Recherche Scientifique (INRS), Centre Eau Terre Environnement, 490 de la Couronne, Québec, QC G1K 9A9 (Canada); Bernatchez, Louis [Institut de Biologie Intégrative et des Systèmes (IBIS), Université Laval, Québec, QC G1V 0A6 (Canada); Couture, Patrice, E-mail: patrice.couture@ete.inrs.ca [Institut National de la Recherche Scientifique (INRS), Centre Eau Terre Environnement, 490 de la Couronne, Québec, QC G1K 9A9 (Canada)

2016-08-15

Highlights: • Yellow perch were exposed to a combination of heat and metal (Cd or Ni) stress. • Kidney metal accumulation was greatly enhanced at higher temperatures. • Elevated temperatures negatively affected several indicators of condition and metabolic capacities. • Exposure to Ni stimulated gonad development. • Metal stress modified the normal response of antioxidant capacities and apoptosis to heat stress. - Abstract: In this study, we measured the effects of temperature (9 °C, 20 °C, and 28 °C), metal contamination (cadmium and nickel) and their interaction on yellow perch (Perca flavescens) using liver enzymatic and transcriptomic endpoints and biometric indices. Kidney metal concentrations increased with a rise of temperature. The biometric indices analysed (Fulton condition factor, pyloric cæca, hepatosomatic and gonadosomatic indices) generally decreased with an increase of temperature but not with metal contamination. At the enzymatic level, the activity of superoxide dismutase (SOD), involved in antioxidant response, was affected by both temperature and metal contamination, whereas the activity of glucose-6-phosphate dehydrogenase (G6PDH), involved in energy accumulation but also in antioxidant response, was only affected by metal exposure. The response of perch to the stressors at the transcriptional level differed from the metabolic response. In particular, the transcription level of the cco and g6pdh genes sharply decreased with increasing temperature, while the activities of the corresponding enzymes remained stable. The normal response of the transcription level of the apoptotic gene (diablo) to heat stress was also altered in metal-contaminated fish. The combination of metal and temperature stresses also modified the response of antioxidant metabolism induced by these stressors individually. This study contributes to a better understanding of the influences of natural stressors like temperature on biomarkers commonly used in

Do high levels of diffuse and chronic metal pollution in sediments of Rhine and Meuse floodplains affect structure and functioning of terrestrial ecosystems?

International Nuclear Information System (INIS)

Rozema, Jelte; Notten, Martje J.M.; Aerts, Rien; Gestel, Cornelis A.M. van; Hobbelen, Peter H.F.; Hamers, Timo H.M.

2008-01-01

This paper (re)considers the question if chronic and diffuse heavy metal pollution (cadmium, copper, lead and zinc) affects the structure and functioning of terrestrial ecosystems of Biesbosch National Park, the floodplain area of rivers Meuse and Rhine. To reach this aim, we integrated the results of three projects on: 1. the origin, transfer and effects of heavy metals in a soil-plant-snail food chain; 2. the impact of bioavailability on effects of heavy metals on the structure and functioning of detritivorous communities; 3. the risk assessment of heavy metals for an herbivorous and a carnivorous small mammal food chain. Metal pollution levels of the Biesbosch floodplain soils are high. The bioavailability of metals in the soils is low, causing low metal levels in plant leaves. Despite this, metal concentrations in soil dwelling detritivores and in land snails at polluted locations are elevated in comparison to animals from 'non-polluted' reference sites. However, no adverse effects on ecosystem structure (species richness, density, biomass) and functioning (litter decomposition, leaf consumption, reproduction) have been found. Sediment metal pollution may pose a risk to the carnivorous small mammal food chain, in which earthworms with elevated metal concentrations are eaten by the common shrew. Additional measurements near an active metal smelter, however, show reduced leaf consumption rates and reduced reproduction by terrestrial snails, reflecting elevated metal bioavailability at this site. Since future management may also comprise reintroduction of tidal action in the Biesbosch area, changes in metal bioavailability, and as a consequence future ecosystem effects, cannot be excluded

Levels of essential and toxic metals in fenugreek seeds (Trigonella Foenum-Graecum L. cultivated in different parts of Ethiopia

Directory of Open Access Journals (Sweden)

Mebrahtu Hagos

Full Text Available Summary The levels of the major (Ca, K, Na, Mg, trace (Fe, Cr, Ni, Zn, Mn, Cu, Co, and toxic (Pb, Cd metals in the seeds of fenugreek cultivated in different regions of Ethiopia were determined by flame atomic absorption spectrophotometry (FAAS. Wet ashing was used to digest 0.5 g of fenugreek seed flour using 1.5 mL of HNO3 and HClO4 acid mixtures (5:1 ratio, 30 min pre-digestion time, 45 min total digestion time and a temperature of 150 °C. Thirteen elements were determined, obtaining concentrations in the following ranges: Ca (15353-36771 mg kg-1 > Fe (6041-18584 mg kg-1 ≈ K (6789-11517 mg kg-1 > Pb (615-2624 mg kg-1 > Na (201-1559 mg kg-1 > Cd (285-464 mg kg-1 > Cr (3-552 mg kg-1 > Ni (31-108 mg kg-1 > Mg (31-102 mg kg-1 > Zn (15-33 mg kg-1 > Mn (16-28 mg kg-1 > Cu (ND-35 mg kg-1 > Co (4-15 mg kg-1. A statistical analysis of variance (ANOVA at the 95% confidence level revealed there were significant differences between the mean metal contents of fourteen sample means, except for Zn. Pearson’s correlation revealed weak positive or negative linear relationships, which implies that the presence of one metal did not affect the presence of the other metals within the plant, except for a few metals. The study showed that fenugreek seeds were a good source of essential metals. However, they also contained large amounts of the toxic metals Cd and Pb and therefore should not be consumed daily.

Levels of micronutrients and heavy metals in cord blood and ...

African Journals Online (AJOL)

The basis of the impact of HAP on maternal and fetal health was assessed by determining the levels of teratogenic heavy metals [Lead (Pb), Mercury (Hg)] and micronutrients associated with DNA methylation [Zinc (Zn), Iodine (I), vitamins B6 and B12, folic acid and homocysteine] in cord blood of babies and maternal blood ...

Macrocyclic receptor showing extremely high Sr(II)/Ca(II) and Pb(II)/Ca(II) selectivities with potential application in chelation treatment of metal intoxication.

Science.gov (United States)

Ferreirós-Martínez, Raquel; Esteban-Gómez, David; Tóth, Éva; de Blas, Andrés; Platas-Iglesias, Carlos; Rodríguez-Blas, Teresa

2011-04-18

Herein we report a detailed investigation of the complexation properties of the macrocyclic decadentate receptor N,N'-Bis[(6-carboxy-2-pyridil)methyl]-4,13-diaza-18-crown-6 (H(2)bp18c6) toward different divalent metal ions [Zn(II), Cd(II), Pb(II), Sr(II), and Ca(II)] in aqueous solution. We have found that this ligand is especially suited for the complexation of large metal ions such as Sr(II) and Pb(II), which results in very high Pb(II)/Ca(II) and Pb(II)/Zn(II) selectivities (in fact, higher than those found for ligands widely used for the treatment of lead poisoning such as ethylenediaminetetraacetic acid (edta)), as well as in the highest Sr(II)/Ca(II) selectivity reported so far. These results have been rationalized on the basis of the structure of the complexes. X-ray crystal diffraction, (1)H and (13)C NMR spectroscopy, as well as theoretical calculations at the density functional theory (B3LYP) level have been performed. Our results indicate that for large metal ions such as Pb(II) and Sr(II) the most stable conformation is Δ(δλδ)(δλδ), while for Ca(II) our calculations predict the Δ(λδλ)(λδλ) form being the most stable one. The selectivity that bp18c6(2-) shows for Sr(II) over Ca(II) can be attributed to a better fit between the large Sr(II) ions and the relatively large crown fragment of the ligand. The X-ray crystal structure of the Pb(II) complex shows that the Δ(δλδ)(δλδ) conformation observed in solution is also maintained in the solid state. The Pb(II) ion is endocyclically coordinated, being directly bound to the 10 donor atoms of the ligand. The bond distances to the donor atoms of the pendant arms (2.55-2.60 Å) are substantially shorter than those between the metal ion and the donor atoms of the crown moiety (2.92-3.04 Å). This is a typical situation observed for the so-called hemidirected compounds, in which the Pb(II) lone pair is stereochemically active. The X-ray structures of the Zn(II) and Cd(II) complexes show that

Trace metal levels in soils and vegetation from some tin mining ...

African Journals Online (AJOL)

Samples of soil and vegetation from some tin mining areas of Nigeria were analysed for lead, zinc, copper and cadmium content. The levels of Pb and Zn were found to be high in some samples. The mean levels of metal in the vegetation were: 86.6+ 36.0, 49.6+ 28.3, 12.6+4.8 and 1.4+0.8 µgg-1 dry weight for Pb, Zn, Cu ...

Trace Metal Levels in Raw and Heat Processed Nigerian Staple ...

African Journals Online (AJOL)

The levels of some trace metals (Fe, Zn, Cu, Ni, Cd) were quantitatively determined in raw and heat processed staple food cultivars (yam, cassava, cocoyam and maize) from oil producing areas of part of the Niger Delta and compared with a non-oil producing area of Ebonyi State as control. The survey was conducted to ...

The Severity of Autism Is Associated with Toxic Metal Body Burden and Red Blood Cell Glutathione Levels

Energy Technology Data Exchange (ETDEWEB)

Adams, J B; Mitchell, I J [Division of Basic Medical Sciences, Southwest College of Naturopathic Medicine, Tempe, AZ 85282 (United States); Baral, M; Bradstreet, J [Department of Pediatric Medicine, Southwest College of Naturopathic Medicine, Tempe, AZ 85282 (United States); Geis, E; Ingram, J; Hensley, A; Zappia, I; Gehn, E; Mitchell, K [Autism Research Institute, San Diego, CA 92116-2599 (United States); Newmark, S [Center for Integrative Pediatric Medicine, Tucson, AZ 85711 (United States); Rubin, R A [Department of Mathematics, Whittier College, Whittier, CA 90601-4413 (United States); Bradstreet, J [International Child Development Resource Center, Phoenix, AZ (United States); El-Dahrn, J M [Department of Pediatrics, Tulane University School of Medicine, New Orleans, LA 70112 (United States)

2009-07-01

This study investigated the relationship of children's autism symptoms with their toxic metal body burden and red blood cell (RBC) glutathione levels. In children ages 38 years, the severity of autism was assessed using four tools: ADOS, PDD-BI, ATEC, and SAS. Toxic metal body burden was assessed by measuring urinary excretion of toxic metals, both before and after oral dimercaptosuccinic acid (DMSA). Multiple positive correlations were found between the severity of autism and the urinary excretion of toxic metals. Variations in the severity of autism measurements could be explained, in part, by regression analyses of urinary excretion of toxic metals before and after DMSA and the level of RBC glutathione (adjusted R2 of 0.220.45, P<.005 in all cases). This study demonstrates a significant positive association between the severity of autism and the relative body burden of toxic metals.

The Severity of Autism Is Associated with Toxic Metal Body Burden and Red Blood Cell Glutathione Levels

International Nuclear Information System (INIS)

Adams, J.B.; Mitchell, I.J.; Baral, M.; Bradstreet, J.; Geis, E.; Ingram, J.; Hensley, A.; Zappia, I.; Gehn, E.; Mitchell, K.; Newmark, S.; Rubin, R.A.; Bradstreet, J.; El-Dahrn, J.M.

2009-01-01

This study investigated the relationship of children's autism symptoms with their toxic metal body burden and red blood cell (RBC) glutathione levels. In children ages 38 years, the severity of autism was assessed using four tools: ADOS, PDD-BI, ATEC, and SAS. Toxic metal body burden was assessed by measuring urinary excretion of toxic metals, both before and after oral dimercaptosuccinic acid (DMSA). Multiple positive correlations were found between the severity of autism and the urinary excretion of toxic metals. Variations in the severity of autism measurements could be explained, in part, by regression analyses of urinary excretion of toxic metals before and after DMSA and the level of RBC glutathione (adjusted R2 of 0.220.45, P<.005 in all cases). This study demonstrates a significant positive association between the severity of autism and the relative body burden of toxic metals.

First-time demonstration of measuring concrete prestress levels with metal packaged fibre optic sensors

Science.gov (United States)

Mckeeman, I.; Fusiek, G.; Perry, M.; Johnston, M.; Saafi, M.; Niewczas, P.; Walsh, M.; Khan, S.

2016-09-01

In this work we present the first large-scale demonstration of metal packaged fibre Bragg grating sensors developed to monitor prestress levels in prestressed concrete. To validate the technology, strain and temperature sensors were mounted on steel prestressing strands in concrete beams and stressed up to 60% of the ultimate tensile strength of the strand. We discuss the methods and calibration procedures used to fabricate and attach the temperature and strain sensors. The use of induction brazing for packaging the fibre Bragg gratings and welding the sensors to prestressing strands eliminates the use of epoxy, making the technique suitable for high-stress monitoring in an irradiated, harsh industrial environment. Initial results based on the first week of data after stressing the beams show the strain sensors are able to monitor prestress levels in ambient conditions.

Probing the role of metal cations on the aggregation behavior of amyloid β-peptide at a single molecule level by AFM

International Nuclear Information System (INIS)

Xie, Yang; Wang, Jianhua; Liu, Chundong

2016-01-01

With the development of nanotechnology, understanding of intermolecular interactions on a single molecule level by atomic force spectroscopy (AFM) has played an important role in molecular biology and biomedical science. In recent years, some research suggested that the presence of metal cations is an important regulator in the processes of misfolding and aggregation of the amyloid β-protein (Aβ), which may be an important etiological factor of Alzheimer’s disease. However, the knowledge on the principle of interactions between Aβ and metal cations at the single molecule level is still poor understood. In this paper, the amyloid β-protein (Aβ) was fabricated on substrate of mixed thiol-modified gold nanoparticles using self-assembled monolayer method and the adhesion force in the longitudinal direction between metal cations and Aβ42 were investigated by AFM. The role of metal ions on Aβ aggregation is discussed from the perspective of single molecular force. The force results showed that the specific adhesion force F_i and the nonspecific force F_0 between a single Aβ–Aβ pair in control experiment were calculated as 42 ± 3 and 80 pN, respectively. However, F_i between a single Aβ–Aβ pair in the presence of Cu"2"+, Zn"2"+, Ca"2"+ and Al"3"+ increased dramatically to 84 ± 6, 89 ± 3, 73 ± 5, 95 ± 5 pN successively, which indicated that unbinding between Aβ proteins is accelerated in the presence of metal cations. What is more, the imaging results showed that substoichiometric copper cations accelerate the formation of fibrils within 3 days. The combined atomic force spectroscopy and imaging analysis indicate that metal cations play a role in promoting the aggregating behavior of Aβ42.

Probing the role of metal cations on the aggregation behavior of amyloid β-peptide at a single molecule level by AFM

Science.gov (United States)

Xie, Yang; Wang, Jianhua; Liu, Chundong

2016-09-01

With the development of nanotechnology, understanding of intermolecular interactions on a single molecule level by atomic force spectroscopy (AFM) has played an important role in molecular biology and biomedical science. In recent years, some research suggested that the presence of metal cations is an important regulator in the processes of misfolding and aggregation of the amyloid β-protein (Aβ), which may be an important etiological factor of Alzheimer's disease. However, the knowledge on the principle of interactions between Aβ and metal cations at the single molecule level is still poor understood. In this paper, the amyloid β-protein (Aβ) was fabricated on substrate of mixed thiol-modified gold nanoparticles using self-assembled monolayer method and the adhesion force in the longitudinal direction between metal cations and Aβ42 were investigated by AFM. The role of metal ions on Aβ aggregation is discussed from the perspective of single molecular force. The force results showed that the specific adhesion force F i and the nonspecific force F 0 between a single Aβ-Aβ pair in control experiment were calculated as 42 ± 3 and 80 pN, respectively. However, F i between a single Aβ-Aβ pair in the presence of Cu2+, Zn2+, Ca2+ and Al3+ increased dramatically to 84 ± 6, 89 ± 3, 73 ± 5, 95 ± 5 pN successively, which indicated that unbinding between Aβ proteins is accelerated in the presence of metal cations. What is more, the imaging results showed that substoichiometric copper cations accelerate the formation of fibrils within 3 days. The combined atomic force spectroscopy and imaging analysis indicate that metal cations play a role in promoting the aggregating behavior of Aβ42.

Probing the role of metal cations on the aggregation behavior of amyloid β-peptide at a single molecule level by AFM

Energy Technology Data Exchange (ETDEWEB)

Xie, Yang; Wang, Jianhua, E-mail: wjh@cqu.edu.cn; Liu, Chundong [Chongqing University, Key Laboratory of Biorheological Science and Technology, Ministry of Education, College of Bioengineering (China)

2016-09-15

With the development of nanotechnology, understanding of intermolecular interactions on a single molecule level by atomic force spectroscopy (AFM) has played an important role in molecular biology and biomedical science. In recent years, some research suggested that the presence of metal cations is an important regulator in the processes of misfolding and aggregation of the amyloid β-protein (Aβ), which may be an important etiological factor of Alzheimer’s disease. However, the knowledge on the principle of interactions between Aβ and metal cations at the single molecule level is still poor understood. In this paper, the amyloid β-protein (Aβ) was fabricated on substrate of mixed thiol-modified gold nanoparticles using self-assembled monolayer method and the adhesion force in the longitudinal direction between metal cations and Aβ42 were investigated by AFM. The role of metal ions on Aβ aggregation is discussed from the perspective of single molecular force. The force results showed that the specific adhesion force F{sub i} and the nonspecific force F{sub 0} between a single Aβ–Aβ pair in control experiment were calculated as 42 ± 3 and 80 pN, respectively. However, F{sub i} between a single Aβ–Aβ pair in the presence of Cu{sup 2+}, Zn{sup 2+}, Ca{sup 2+} and Al{sup 3+} increased dramatically to 84 ± 6, 89 ± 3, 73 ± 5, 95 ± 5 pN successively, which indicated that unbinding between Aβ proteins is accelerated in the presence of metal cations. What is more, the imaging results showed that substoichiometric copper cations accelerate the formation of fibrils within 3 days. The combined atomic force spectroscopy and imaging analysis indicate that metal cations play a role in promoting the aggregating behavior of Aβ42.

Bromate and trace metal levels in bread loaves from outlets within Ile-Ife Metropolis, Southwestern Nigeria

Directory of Open Access Journals (Sweden)

J.A.O. Oyekunle

2014-01-01

Full Text Available Bread loaves randomly sampled from nine outlets and bakeries within Ile-Ife were analysed to determine their safety levels for human consumption with respect to bromate and trace metal contents. Bromate determination was carried out via spectrophotometric method while trace metals in the digested bread samples were profiled using Flame Atomic Absorption Spectrophotometer. Bromate levels in the analyzed bread samples ranged from 2.051 ± 0.011 μg/g to 66.224 ± 0.014 μg/g while the trace metal levels were of the order: 0.03–0.10 μg/g Co = 0.03–0.10 μg/g Pb < 0.23–0.46 μg/g Cu < 2.23–6.63 μg/g Zn < 25.83–75.53 μg/g Mn. This study revealed that many bread bakers around Ile-Ife had not fully complied with the bromate-free rule stipulated by NAFDAC contrary to the “bromate free” inscribed on the labels of the bread. The bread samples contained both essential and toxic trace metals to levels that could threaten the health of consumers over prolonged regular consumption.

Volume reduction of low-level contaminated metal waste by melting: selection of method and conceptual plan

International Nuclear Information System (INIS)

Copeland, G.L.; Heestand, R.L.; Mateer, R.S.

1978-06-01

A review of the literature and prior experience led to selection of induction melting as the most promising method for volume reduction of low-level transuranic contaminated metal waste. The literature indicates that melting with the appropriate slags significantly lowers the total contamination level of the metals by preferentially concentrating contaminants in the smaller volume of slag. Surface contamination not removed to the slag is diluted in the ingot and is contained uniformly in the metal. This dilution and decontamination offers the potential of lower cost disposal such as shallow burial rather than placement in a national repository. A processing plan is proposed as a model for economic analysis of the collection and volume reduction of contaminated metals. Further development is required to demonstrate feasibility of the plan

Evaluation of Levels, Sources and Health Hazards of Road-Dust Associated Toxic Metals in Jalalabad and Kabul Cities, Afghanistan.

Science.gov (United States)

Jadoon, Waqar Azeem; Khpalwak, Wahdatullah; Chidya, Russel Chrispine Garven; Abdel-Dayem, Sherif Mohamed Mohamed Ali; Takeda, Kazuhiko; Makhdoom, Masood Arshad; Sakugawa, Hiroshi

2018-01-01

This study was designed to investigate selected road-dust associated heavy metals, their relations with natural and anthropogenic sources, and potential human and environmental health risks. For this purpose, 42 and 36 road-dusts samples were collected from Jalalabad and Kabul cities (Afghanistan), respectively. The following elements were found in descending concentrations: Mn, Zn, Pb, Ni, Cu, Cr, Co, and Cd in Jalalabad; and Mn, Zn, Ni, Cu, Cr, Pb, Co, and Cd in Kabul. Except for Ni, all the elemental contents were less than the Canadian permissible limits in residential/parkland soils. Principle Component Analysis and enrichment of Cd, Cu, Ni, Pb, and Zn pointed to anthropogenic sources, whereas Co, Cr, and Mn indicated crustal inputs. Broadly, Cd monomial risk index ([Formula: see text]) was considerable; however, one site each in both cities showed high risk ([Formula: see text] ≥ 350). The potential ecological risk (RI) is mostly low; however, at some sites, the risk was considerable. Ingestion appeared to be the main exposure route (99%) for heavy metals and contributed > 90% to noncancerous (all residents), as well as 92% (children) and 75-89% (adults) cancerous risks. The noncancerous risks of all metals and their integrated risks for all residents were within acceptable levels. Moreover, potential cancer risks in children from Ni and Cr were slightly higher than the US-EPA safe levels but were within acceptable levels for adults. This study found higher risks to children and therefore recommends proper management and ways to control metals pollution load in these areas to decrease human health and RIs.

Is metal contamination responsible for increasing aneuploidy levels in the Manila clam Ruditapes philippinarum?

KAUST Repository

Piló , D.; Carvalho, Susana; Pereira, P.; Gaspar, M.B.; Leitã o, A.

2016-01-01

The present study assessed the metal genotoxicity potential at chromosome-level in the bivalve Ruditapes philippinarum collected along different areas of the Tagus estuary. Higher levels of aneuploidy on gill cells were detected at the most sediment

Influence of heavy metals in non-anthropized soils with high levels of primordial radionuclides

International Nuclear Information System (INIS)

Bezerra, Jairo Dias; Amaral, Romilton dos Santos; Santos Junior, Jose Araujo dos; Rocha, Edilson Accioly; Oliveira, Jose Valdez Monterazo de; Bispo, Rodrigo Cesar Bezerra

2011-01-01

High concentrations of heavy metals in the ecosystem depend naturally geological formation in each area of the planet and of anthropic activities that contribute to contamination of soil, water sources and food produced in these areas. In this context, we highlight the importance in the study of As, Cr and Ba because of the level of toxicity, availability and chemical speciation that have. The study area was chosen to present agricultural activity and milk production on a large scale. This area is located in the rugged region of the state of Pernambuco, in the town of stone, where the arable soil was monitored aiming to determine the levels of these metals. Analyses were performed by the technique of neutron activation analysis coupled with the high-resolution gamma spectrometry. Were analyzed twenty-three soil samples collected from the horizon C. The results obtained varied from values smaller that (0.2 to 6.7) mg.kg -1 for As; (12.1 to 65.5) mg.kg -1 for Cr and (443 a 1,497) mg.kg -1 for Ba. Comparing them with the values established by CONAMA Resolution 420/2009, it was found that the concentrations of Ba are 100% above the value of prevention, and approximately 91% of values above the intervention value. The As and Cr showed 100% of results below the value of prevention. Whereas the study area has no industrial activity, high concentrations are determined for the Ba from natural processes. For the levels found evidence of a possible contamination of water sources and food produced in this region. (author)

Mobile plant for encapsulating of solid high-level radioactive waste in metal matrix

International Nuclear Information System (INIS)

Sobolev, I.A.; Arustamov, A.Eh.; Shiryaev, V.V.; Ozhovan, M.I.; Semenov, K.N.; Kachalov, M.B.

1993-01-01

Technology for disposal of spent radionuclide sources of ionizing radiation into the standard well-type storage facilities is considered. Universal mobile facility, providing for incorporation of high-level solid wastes into metallic matrices, is proposed. The facility consists of separate moduli, assembled on a transport platform. Electrical meter, wherein the matrix metal (lead and its alloys) is melted and heated up to 600-800 C constitutes the basic modulus in the facility. 4 refs., 4 figs

Heavy Metals in Seafood and Farm Produce from Uyo, Nigeria; Levels and health implications

Directory of Open Access Journals (Sweden)

Orish E. Orisakwe

2015-05-01

Full Text Available Objectives: This study aimed to obtain representative data on the levels of heavy metals in seafood and farm produce consumed by the general population in Uyo, Akwa Ibom State, Nigeria, a region known for the exploration and exploitation of crude oil. Methods: In May 2012, 25 food items, including common types of seafood, cereals, root crops and vegetables, were purchased in Uyo or collected from farmland in the region. Dried samples were ground, digested and centrifuged. Levels of heavy metals (lead, cadmium, nickel, cobalt and chromium were analysed using an atomic absorption spectrophotometer. Average daily intake and target hazard quotients (THQ were estimated. Results: Eight food items (millet, maize, periwinkle, crayfish, stock fish, sabina fish, bonga fish and pumpkin leaf had THQ values over 1.0 for cadmium, indicating a potential health risk in their consumption. All other heavy metals had THQ values below 1.0, indicating insignificant health risks. The total THQ for the heavy metals ranged from 0.389 to 2.986. There were 14 items with total THQ values greater than 1.0, indicating potential health risks in their consumption. Conclusion: The regular consumption of certain types of farm produce and seafood available in Uyo, Akwa Ibom State, Nigeria, is likely adding to the body burden of heavy metals among those living in this region.

Trace metal uptake by garden herbs and vegetables.

Science.gov (United States)

Shariatpanahi, M; Anderson, A C; Mather, F

1986-12-01

In many regions of Iran, crops are irrigated with municipal and industrial wastewater that contain a variety of metals. The purpose of this study was to simulate the level of metals that may be presented to plants over a growing season in a controlled laboratory setting. Cadmium, lead, arsenic, chromium, mercury, nickel, copper, zinc, and selenium were applied to plants at the high rate of 200 g metal/ha/wk. The following plants were examined for metal accumulation and effects on yield: garden cress (Lipidium sativum), leek (Allium porrum L.), basil (Ocimum basilicum L.), mint (Mentha arvensis L.), onion (Allium capa L.), radish (Raphanus sativus L.), and tarragon (Artemisia draculus L.). All plants showed significant uptake of all metals when compared to control (p=0.05), and growth was significantly reduced (p=0.05). Cadmium and chromium levels of 85±7.4 and 47.6±8.9 μg/g); selenium levels were highest in tarragon (16.5±5.8 μg/g). Zinc levels were similar (p=0.05) in all species tested, as were mercury and lead. The remaining metals (nickel and copper) showed significant differences in uptake, depending on plant species.

High level leaching of heavy metals from colorful ceramic foodwares: a potential risk to human.

Science.gov (United States)

Aderemi, Taiwo Adedoyin; Adenuga, Adeniyi Abiodun; Oyekunle, John Adekunle Oyedele; Ogunfowokan, Aderemi Okunola

2017-07-01

Ceramic foodwares are among the products used by people on daily basis without being cautious of exposures to heavy metals through possible leaching from the glaze ceramics. This study investigated the levels of heavy metals found in some commonly used ceramic foodwares in Nigeria with the aim of determining levels of human exposures through the use of the ceramics. To achieve this, acid digestion was carried out for the total metal concentrations and leaching tests were done using 4% acetic acid as a leaching agent. Metal concentrations were quantified using flame atomic absorption spectrometry (FAAS) and particle-induced X-ray emission spectrometry (PIXES) analysis. All the ceramic foodwares studied were found to contain varied amounts of heavy metals in their glazes, with concentrations in the range of 26.45-2071.46, 5.20-547.00, 1.24-2681.02, 2590.00-8848.40, 6.42-654.66, 112.69-649.95, 63.38-2518.51, and 3786.51-8249.44 μg g -1 for Pb, Cd, Zn, As, Cu, Cr, Mn, and Fe, respectively. Concentrations of the metals leached from the ceramics were in the range of 0.11-0.97, 0.01-0.28, 0.00-4.19, 1.93-15.00, 0.01-0.41, 0.09-0.60, 0.01-2.14, and 0.01-11.53 mgL -1 for Pb, Cd, Zn, As, Cu, Cr, Mn, and Fe, respectively. Comparing the ratio of the metals leached from the ceramic wares with those of the metal oxides in the ceramics, it was noticeable that not all the metals detected in the ceramic samples were domiciled in the glaze but in the clay materials used for the ceramics.

Pore-level determination of spectral reflection behaviors of high-porosity metal foam sheets

Science.gov (United States)

Li, Yang; Xia, Xin-Lin; Ai, Qing; Sun, Chuang; Tan, He-Ping

2018-03-01

Open cell metal foams are currently attracting attention and their radiative behaviors are of primary importance in high temperature applications. The spectral reflection behaviors of high-porosity metal foam sheets, bidirectional reflectance distribution function (BRDF) and directional-hemispherical reflectivity were numerically investigated. A set of realistic nickel foams with porosity from 0.87 to 0.97 and pore density from 10 to 40 pores per inch were tomographied to obtain their 3-D digital cell network. A Monte Carlo ray-tracing method was employed in order to compute the pore-level radiative transfer inside the network within the limit of geometrical optics. The apparent reflection behaviors and their dependency on the textural parameters and strut optical properties were comprehensively computed and analysed. The results show a backward scattering of the reflected energy at the foam sheet surface. Except in the cases of large incident angles, an energy peak is located almost along the incident direction and increases with increasing incident angles. Through an analytical relation established, the directional-hemispherical reflectivity can be related directly to the porosity of the foam sheet and to the complex refractive index of the solid phase as well as the specularity parameter which characterizes the local reflection model. The computations show that a linear decrease in normal-hemispherical reflectivity occurs with increasing porosity. The rate of this decrease is directly proportional to the strut normal reflectivity. In addition, the hemispherical reflectivity increases as a power function of the incident angle cosine.

Scoping evaluation of the technical capabilities of DOE sites for disposal of hazardous metals in mixed low-level waste

International Nuclear Information System (INIS)

Gruebel, M.M.; Waters, R.D.; Langkopf, B.S.

1997-05-01

A team of analysts designed and conducted a scoping evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of the hazardous metals in mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Eight hazardous metals were evaluated: arsenic, barium, cadmium, chromium, lead, mercury, selenium, and silver. The analysis considered transport only through the groundwater pathway. The results are reported as site-specific estimates of maximum concentrations of each hazardous metal in treated mixed low-level waste that do not exceed the performance measures established for the analysis. Also reported are site-specific estimates of travel times of each hazardous metal to the point of compliance

Plant growth and development vs. high and low levels of plant-beneficial heavy metal ions

Directory of Open Access Journals (Sweden)

Namira Arif

2016-11-01

Full Text Available Heavy metals (HMs exists in the environment in both forms as essential and non-essential. These HM ions enter in soil biota from various sources like natural and anthropogenic. Essential HMs such as cobalt (Co, copper (Cu, iron (Fe, manganese (Mn, molybdenum (Mo, nickel (Ni, and zinc (Zn plays a beneficial role in plant growth and development. At optimum level these beneficial elements improves the plant’s nutritional level and also several mechanisms essential for the normal growth and better yield of plants. The range of their optimality for land plants is varied. Plant uptake heavy metals as a soluble component or solubilized them by root exudates. While their presence in excess become toxic for plants that switches the plant’s ability to uptake and accumulate other nonessential elements. The increased amount of HMs within the plant tissue displays direct and indirect toxic impacts. Such direct effects are the generation of oxidative stress which further aggravates inhibition of cytoplasmic enzymes and damage to cell structures. Although, indirect possession is the substitution of essential nutrients at plant’s cation exchange sites. These ions readily influence role of various enzymes and proteins, arrest metabolism, and reveal phytotoxicity. On account of recent advancements on beneficial HMs ions Co, Cu, Fe, Mn, Mo, Ni, and Zn in soil-plant system, the present paper: overview the sources of HMs in soils and their uptake and transportation mechanism, here we have discussed the role of metal transporters in transporting the essential metal ions from soil to plants. The role played by Co, Cu, Fe, Mn, Mo, Ni, and Zn at both low and high level on the plant growth and development and the mechanism to alleviate metal toxicity at high level have been also discussed. At the end, on concluding the article we have also discussed the future perspective in respect to beneficial HM ions interaction with plant at both levels.

Literature survey on metal waste form for metallic waste from electrorefiners for the electrometallurgical treatment of spent metallic fuels

International Nuclear Information System (INIS)

Nishimura, Tomohiro

2003-01-01

This report summarizes the recent results of the metal waste form development activities at the Argonne National Laboratory in the USA for high-level radioactive metallic waste (stainless-steel (SS) cladding hulls, zirconium (Zr), noble-metal fission products (NMFPs), etc.) from electrorefiners for the electrometallurgical treatment of spent metallic fuels. Their main results are as follows: (1) SS- 15 wt.% Zr- ∼4 wt.% NMFPs alloy was selected as the metal waste form, (2) metallurgical data, properties, long-term corrosion data, etc. of the alloy have been collected, (3) 10-kg ingots have been produced in hot tests and a 60-kg production machine is under development. The following research should be made to show the feasibility of the metal waste form in Japan: (1) degradation assessment of the metal waste form in Japanese geological repository environments, and (2) clarification of the maximum allowable contents of NMFPs. (author)

Bioavailability of particulate metal to zebra mussels: Biodynamic modelling shows that assimilation efficiencies are site-specific

Energy Technology Data Exchange (ETDEWEB)

Bourgeault, Adeline, E-mail: bourgeault@ensil.unilim.fr [Cemagref, Unite de Recherche Hydrosystemes et Bioprocedes, 1 rue Pierre-Gilles de Gennes, 92761 Antony (France); FIRE, FR-3020, 4 place Jussieu, 75005 Paris (France); Gourlay-France, Catherine, E-mail: catherine.gourlay@cemagref.fr [Cemagref, Unite de Recherche Hydrosystemes et Bioprocedes, 1 rue Pierre-Gilles de Gennes, 92761 Antony (France); FIRE, FR-3020, 4 place Jussieu, 75005 Paris (France); Priadi, Cindy, E-mail: cindy.priadi@eng.ui.ac.id [LSCE/IPSL CEA-CNRS-UVSQ, Avenue de la Terrasse, 91198 Gif-sur-Yvette (France); Ayrault, Sophie, E-mail: Sophie.Ayrault@lsce.ipsl.fr [LSCE/IPSL CEA-CNRS-UVSQ, Avenue de la Terrasse, 91198 Gif-sur-Yvette (France); Tusseau-Vuillemin, Marie-Helene, E-mail: Marie-helene.tusseau@ifremer.fr [IFREMER Technopolis 40, 155 rue Jean-Jacques Rousseau, 92138 Issy-Les-Moulineaux (France)

2011-12-15

This study investigates the ability of the biodynamic model to predict the trophic bioaccumulation of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) in a freshwater bivalve. Zebra mussels were transplanted to three sites along the Seine River (France) and collected monthly for 11 months. Measurements of the metal body burdens in mussels were compared with the predictions from the biodynamic model. The exchangeable fraction of metal particles did not account for the bioavailability of particulate metals, since it did not capture the differences between sites. The assimilation efficiency (AE) parameter is necessary to take into account biotic factors influencing particulate metal bioavailability. The biodynamic model, applied with AEs from the literature, overestimated the measured concentrations in zebra mussels, the extent of overestimation being site-specific. Therefore, an original methodology was proposed for in situ AE measurements for each site and metal. - Highlights: > Exchangeable fraction of metal particles did not account for the bioavailability of particulate metals. > Need for site-specific biodynamic parameters. > Field-determined AE provide a good fit between the biodynamic model predictions and bioaccumulation measurements. - The interpretation of metal bioaccumulation in transplanted zebra mussels with biodynamic modelling highlights the need for site-specific assimilation efficiencies of particulate metals.

Metals and dioxins on the air in a cement plant; Niveles ambientales de metales y dioxinas en las proximidades de una planta cementera

Energy Technology Data Exchange (ETDEWEB)

Domingo, J. L.

2001-07-01

In May 2000, the levels of a number of metals (As, Cd, Pb, Hg, Zn, Co, Cu, Mn, Sn, Tl, Cr, Ni, and V) were determined in soil and herbage samples taken from 16 sites in the vicinity of a cement plant (Sta. Margarita i els Monjos, Barcelona). During 2000, metal concentrations were also analyzed quarterly in filters from three stations placed near the facility. In soil and herbage samples, Mn and Zn showed the highest levels. However, most metal concentrations were similar or even lower than previously reported values for other areas in Catalonia. On the other hand, the levels of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) were also determined in 4 soil and 16 herbage samples. In comparison with the concentrations found in other places, the present levels are rather low. The current results show that the cement plant has a low impact on the metal and PCDD/PCDF levels in the environment under influence of the facility. (Author) 19 refs.

Levels of heavy metals and essential minerals in hair samples of children with autism in Oman: a case-control study.

Science.gov (United States)

Al-Farsi, Yahya M; Waly, Mostafa I; Al-Sharbati, Marwan M; Al-Shafaee, Mohammed A; Al-Farsi, Omar A; Al-Khaduri, Maha M; Gupta, Ishita; Ouhtit, Allal; Al-Adawi, Samir; Al-Said, Mona F; Deth, Richard C

2013-02-01

Toxic levels of heavy metals and low levels of essential minerals have been suggested to play a critical role in the pathogenesis of autism spectrum disorders (ASD). This study documents the levels of heavy metals and essential minerals in hair samples of children with ASD in Muscat, the urbanized capital of Oman, Muscat. The study included 27 children with ASD and 27 matched non-ASD controls. Parental interviews were held and dietary intake questionnaires completed in conjunction with the collection of hair samples. Analysis of heavy metals and essential minerals was carried out by inductively coupled plasma mass spectrometry. Chi-square analysis and non-parametric Fisher's exact tests were used to assess statistical significance. Children with ASD had significantly higher levels of all 11 analyzed heavy metals in their hair samples (P minerals sulfur, sodium, magnesium, potassium, zinc, and iron, but lower levels of calcium and copper in their hair samples. This study corroborates data from previous studies in different parts of the world indicating the presence of elevated levels of heavy metals and selective depletion of essential minerals in the hair of children with ASD.

Concentration Levels, Pollution Characteristics and Potential Ecological Risk of Dust Heavy Metals in the Metropolitan Area of Beijing, China.

Science.gov (United States)

Xiong, Qiulin; Zhao, Wenji; Zhao, Jiayin; Zhao, Wenhui; Jiang, Lei

2017-09-30

This study aims to investigate the concentration levels, pollution characteristics and the associated potential ecological risks of the heavy metals found in dust in the metropolitan area of Beijing, China during the winter. Dust samples were collected at 49 different spatial locations of Beijing's metropolitan area from November 2013 to January 2014, in which the concentration levels of Cd, Cr, Pb, Cu, Zn, Ni, Co, V, Bi and Mo were measured by Elan DRC II type inductively coupled plasma mass spectrometry (ICP-MS). Test results showed that the concentrations of dust heavy metals Pb, Cr, Cu and Zn in the urban areas (147.1 mg·kg -1 , 195.9 mg·kg -1 , 239.2 mg·kg -1 and 713.2 mg·kg -1 ) were significantly higher than those in the suburbs (91.6 mg·kg -1 , 125.1 mg·kg -1 , 131.9 mg·kg -1 and 514.5 mg·kg -1 ). Enrichment factors and the geo-accumulation index were used to describe the pollution characteristics of dust heavy metals in urban and suburban areas. Results indicated that Zn and Cu were moderately polluting in both urban and suburban areas, Cd was severely polluting in urban areas and heavily polluting in the suburbs. Furthermore, potential ecological risk assessment revealed that the degrees of ecological harm of dust heavy metals were very strong in both urban and suburban areas, but especially in urban areas. The potential ecological risk of heavy metal Cd, whose single factor of ecological damage was extremely strong, accounted for about 90% of the total ecological risk.

Levels of essential and potentially toxic trace metals in Antarctic macro algae

International Nuclear Information System (INIS)

Farias, Silvia; Arisnabarreta, Sebastian Perez; Vodopivez, Cristian; Smichowski, Patricia

2002-01-01

Eleven species of Antarctic algae were examined for their accumulation ability in the uptake of different metals and metalloids from the Antarctic aquatic environment. Macro algae were collected during the 2000 austral summer season at Jubany Station (Argentinean base) around Potter Cove, King George Island. The elements quantified were: As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Se, Sr, V, and Zn. An optimized microwave-assisted digestion procedure was used to digest the samples and the elements were determined by inductively coupled plasma optical emission spectrometry. A wide range of metal retention capacity among the different species was observed. The highest levels of trace elements were found in Monostroma hariotii and Phaeurus antarcticus, with concentrations up to 3095 μg g -1 for Fe. On the basis of the levels of trace elements observed in Monostroma hariotii and its wide distribution in the Antarctic Peninsula, this organism accomplishes a number of prerequisites to be considered as an adequate biomonitor for future studies

Metal levels in blood, muscle and liver of water snakes (Nerodia spp.) from New Jersey, Tennessee and South Carolina

Energy Technology Data Exchange (ETDEWEB)

Burger, Joanna [Division of Life Sciences, Nelson Biological Lab., Rutgers Univ., 604 Allison Road, Piscataway, New Jersey (United States)]|[Consortium for Risk Evaluation with Stakeholder Participation and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States)]. E-mail: burger@biology.rutgers.edu; Campbell, Kym Rouse [Consortium for Risk Evaluation with Stakeholder Participation, and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States)]|[Biological Research Associates, 3910 U.S. Highway 301 North, Suite 180, Tampa, Florida 33619 (United States); Murray, Stephanie; Jeitner, Christian; Burke, Sean [Div. of Life Sciences, Nelson Biological Lab., Rutgers Univ., 604 Allison Road, Piscataway, New Jersey (United States)]|[Consortium for Risk Evaluation with Stakeholder Participation, and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States); Campbell, Todd S. [Consortium for Risk Evaluation with Stakeholder Participation, and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States)]|[Dept. of Biology, Box 3F, Univ. of Tampa, 401 West Kennedy Boulevard, Tampa, Florida 33606-1490 (United States); Gaines, Karen F. [Consortium for Risk Evaluation with Stakeholder Participation, and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States)]|[Savannah River Ecology Lab., Univ. of Georgia, P.A. Drawer E, Aiken, South Carolina 29802 (United States)]|[Dept. of Biology, Univ. of South Dakota, 414 E. Clark St., Vermillion, South Dakota 57069 (United States); Shukla, Tara; Gochfeld, Michael [Consortium for Risk Evaluation with Stakeholder Participation, and Environmental and Occupational Health Sciences Inst., Piscataway, New Jersey (United States)]|[Environmental and Occupational Medicine, UMDNJ Robert Wood Johnson Medical School, Piscataway, New Jersey (United States)

2007-02-15

Reptiles, particularly snakes, could serve as bioindicators of contamination because some are comparatively long-lived, exhibit different trophic levels, and are at the top of their food chains. We test the null hypothesis that there are no differences in the concentrations of heavy metals in the blood, muscle and liver of water snakes (Nerodia spp.) from rivers in New Jersey, Tennessee and South Carolina. While the former site is in an urban/suburban area, the latter two sites are relatively rural and are located on Department of Energy sites. For the snakes from New Jersey, there were significant differences in metal concentrations among tissues for all metals, the highest levels for arsenic and selenium were in liver and kidney, for cadmium were in the liver, for chromium and lead were in skin, and for mercury and manganese were in the muscle. Body length was not correlated with metal levels, and there were more significant correlations for skin with internal tissues than for blood with other tissues. There were more significant correlations for mercury than for other metals. In comparing metal levels among states, levels were generally higher for snakes collected from South Carolina. These data indicate that, since water snakes accumulate contaminants differentially as a function of location, they can be useful bioindicators of environmental exposure to contaminants. Moreover, because of their wide geographical distribution and use of varying trophic compartments, this genus can be useful for cross-site comparisons.

Studies of corrosion in metallic container for storage of high level radioactive wastes

International Nuclear Information System (INIS)

Azkarate, I.; Madina, V.; Insausti, M.

1999-01-01

The metallic container is one of the most important barriers that, along with engineered and natural barriers, will isolate high level nuclear waste in saline and granite geological formations from the geosphere. However, general and localized corrosion modes such as stress corrosion cracking (SCC), pitting, crevice corrosion and hydrogen damage can be active under disposal conditions, so the corrosion behaviour of the metal container material must be carefully studied. Several metals and their alloys have been proposed for the fabrication of nuclear waste containers including carbon steels, stainless steels, titanium and titanium alloys and copper and copper-base alloys. Carbon steels and copper alloys are considered for the two rock formations, titanium is considered for salt environments and the stainless steel only in the case of a granite formation. (Author)

Heavy metal pollution in coastal areas of South China: A review

International Nuclear Information System (INIS)

Wang, Shuai-Long; Xu, Xiang-Rong; Sun, Yu-Xin; Liu, Jin-Ling; Li, Hua-Bin

2013-01-01

Highlights: • Heavy metal contamination in coastal areas of South China has been reviewed. • Heavy metal levels were closely related to economic development in past decades. • Heavy metal levels from Hong Kong continually decreased from the early 1990s. • Higher concentrations of heavy metals were found in mollusk. • Levels of heavy metals in part of seafood exceeded the safety limit. -- Abstract: Coastal areas of South China face great challenges due to heavy metal contamination caused by rapid urbanization and industrialization. In this paper, more than 90 articles on levels, distributions, and sources of heavy metals in sediments and organisms were collected to review the status of heavy metal pollution along coastal regions of South China. The results show that heavy metal levels were closely associated with local economic development. Hong Kong and the Pearl River Estuary were severely contaminated by heavy metals. However, concentrations of heavy metals in sediments from Hong Kong have continually decreased since the early 1990s. High levels of heavy metals were found in biota from Lingdingyang in Guangdong province. Mollusks had higher concentrations of heavy metals than other species. Human health risk assessments suggested that levels of heavy metals in some seafood from coastal areas of South China exceeded the safety limit

Surface shift of the occupied and unoccupied 4f levels of the rare-earth metals

DEFF Research Database (Denmark)

Aldén, Magnus; Johansson, Börje; Skriver, Hans Lomholt

1995-01-01

The surface energy shifts of the occupied and unoccupied 4f levels for the lanthanide metals have been calculated from first principles by means of a Green’s-function technique within the tight-binding linear muffin-tin orbitals method. We use the concept of complete screening to identify...... the occupied and unoccupied 4f energy level shifts as the surface segregation energy of a 4fn-1 and 4fn+1 impurity atom, respectively, in a 4fn host metal. The calculations include both initial- and final-state effects and give values that are considerably lower than those measured on polycrystalline samples...... as well as those found in previous initial-state model calculations. The present theory agrees well with very recent high-resolution, single-crystal film measurements for Gd, Tb, Dy, Ho, Er, Tm, and Lu. We furthermore utilize the unique possibility offered by the lanthanide metals to clarify the roles...

Evaluation of Heavy Metal Contamination Levels of Balok River Sediments in Pahang, Malaysia Based on Geo accumulation Index and Supported with Enrichment Factor

International Nuclear Information System (INIS)

Mohd Zahari Abdullah; Nur Rashidah Abd Manap; Ahmad Saat; Zaini Hamzah; Mohd Tahir Abas

2015-01-01

This study was conducted in order to assess the level of metal pollution in river sediment samples, which indirectly representing the general quality of the Balok River. The samples of river sediment have been collected at nine sampling stations from the particular river. The total content of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn were measured using inductively coupled plasma optical emission spectrometer (ICP-OES) after an acid extraction. The mean concentrations (mg/kg) were found at 0.49, 16.16, 42.93, 24.31, 2734.69, 155.61, 16.04, 29.31, 50.71 and 159.40 for the respective metals. The assessment of the river quality was done based on the information showed by the enrichment factor (EF) and geo accumulation index (I geo ). Analysis of the I geo indexes clearly indicate that most of the sediment samples analyzed in this study contained the selected heavy metals in the levels of unpolluted to moderately pollute. Based on the low EF values recorded in this study, it can be concluded that the Balok River sediments is not significantly contaminated with the studied heavy metals. (author)

Conceptual design studies for the liquid metal target META:LIC

International Nuclear Information System (INIS)

Class, A.G.; Fazio, C.; Fetzer, J.R.; Gordeev, S.

2014-01-01

When the construction of ESS (European Spallation Source) in Sweden was initiated, the target station concept selection group decided to reevaluate a variety of target designs to respect new developments in their selection process. The META:LIC (MEgawatt TArget:Lead bIsmuth Cooled) target concept was developed following an extensive analysis of existing and new proposed designs and reached the level of proof of principle within only 2 years. ESS selected META:LIC as comparative target option for licensing purposes during the design update phase of ESS. The present work describes the design motivation of META:LIC referring to properties and design features of other targets. Therefore, META:LIC design is an evolutionary target which incorporates the extensive experience of liquid metal targets. The modular LBE (Lead Bismuth Eutectic) target concept with focus on the target module is introduced. Both, a window target option for the start of operation and a windowless option with extended lifetime are foreseen. Thermohydraulic simulations show that adequate window cooling can be realized. The stability of the free surface in the windowless option has been shown. Robust target module instrumentation based on free surface levels and the MEGAPIE experience is proposed for target control. Since the META:LIC concept foresees a horizontal extraction for both moderators and target from the monolith a safety concept based on the SNS and JSNS experience is proposed

First determination of the levels of platinum group metals in Manta birostris (manta ray) caught along the Ghanaian coastline.

Science.gov (United States)

Essumang, D K

2010-06-01

Tissues from Manta birostris caught by fishermen from Dixcove in the western part of Ghana were analyzed for their Platinum, palladium and rhodium concentrations (PGM). The use of chondrichthyan fish has permitted the study of trace levels of Platinum group metals (PGMs) which have travelled very far into the sea. The analysis showed that Ghana's coastline is fairly polluted with these platinum group metals (PGMs). PGM concentration in manta ray recorded a range of (0.15-0.85) microg/g for Pt, (0.033-0.67) microg/g for Pd and (0.007-0.145) microg/g for Rh. Comparing these values to the UK dietary intake of 0.2 microg/day for Pt and Rh and 1.0 microg/day for Pd, its indicates that the values obtained from the analysis for Pt was above the required level. This is the first study to show the accumulation of PGM in chondrichthyan fish, although the sources of this pollution are not clear as manta birostris is migratory and therefore need to be investigated further. The presence of the PGM is very significant, since manta ray meat is consumed in Ghana. This may presents a health risk, due to a possible accumulation of PGMs in humans.

Bacterial metal resistance genes and metal bioavailability in contaminated sediments

International Nuclear Information System (INIS)

Roosa, Stéphanie; Wattiez, Ruddy; Prygiel, Emilie; Lesven, Ludovic; Billon, Gabriel; Gillan, David C.

2014-01-01

In bacteria a metal may be defined as bioavailable if it crosses the cytoplasmic membrane to reach the cytoplasm. Once inside the cell, specific metal resistance systems may be triggered. In this research, specific metal resistance genes were used to estimate metal bioavailability in sediment microbial communities. Gene levels were measured by quantitative PCR and correlated to metals in sediments using five different protocols to estimate dissolved, particle-adsorbed and occluded metals. The best correlations were obtained with czcA (a Cd/Zn/Co efflux pump) and Cd/Zn adsorbed or occluded in particles. Only adsorbed Co was correlated to czcA levels. We concluded that the measurement of czcA gene levels by quantitative PCR is a promising tool which may complement the classical approaches used to estimate Cd/Zn/Co bioavailability in sediment compartments. - Highlights: • Metal resistance genes were used to estimate metal bioavailability in sediments. • Gene levels were correlated to metals using 5 different metal extraction protocols. • CzcA gene levels determined by quantitative PCR is a promising tool for Cd/Zn/Co. - Capsule Bacterial czcA is a potential biomarker of Cd, Zn and Co bioavailability in aquatic sediments as shown by quantitative PCR and sequential metal extraction

Metals in edible seaweed.

Science.gov (United States)

Rubio, C; Napoleone, G; Luis-González, G; Gutiérrez, A J; González-Weller, D; Hardisson, A; Revert, C

2017-04-01

The concentration levels of 20 metals were analyzed by ICP-OES in edible seaweed (Chondrus, Eisenia, Gelidium, Himanthalia, Laminaria, Palmaria, Porphyra, Undaria), from two origins (Asia vs EU) according to their cultivation practices (conventional vs organic). Red seaweed showed higher concentrations of trace and toxic elements. Porphyra may be used as a potential bioindicator for metals. Significant differences were found between the Asian vs European mean contents. The mean Cd level from the conventional cultivation (0.28 mg/kg) was two points higher than the organic cultivation (0.13 mg/kg). A daily consumption of seaweed (4 g/day) contributes to the dietary intake of metals, mainly Mg and Cr. The average intakes of Al, Cd and Pb were 0.064, 0.001 and 0.0003 mg/day, respectively. Based on obtained results, this study suggests that exposure to the toxic metals analyzed (Al, Cd and Pb) through seaweed consumption does not raise serious health concerns, but other toxic metals should be monitored. Copyright © 2017. Published by Elsevier Ltd.

The levels of certain heavy metals in marine organisms from Aguada Bay (Goa)

Digital Repository Service at National Institute of Oceanography (India)

Singbal, S.Y.S.; George, M.D.; Topgi, R.S.; Noronha, R.J.

The levels of manganese, iron, cobalt, nickel, copper, zinc and mercury have been measured in marine organisms from Aguada Bay which is one of the major fishing zones in Goa, India. The concentration of metals varied from species to species...

Heavy metal and selenium levels in feathers of young egrets and herons from Hong Kong and Szechuan, China.

Science.gov (United States)

Burger, J; Gochfeld, M

1993-09-01

Several species of herons and egrets frequently nest in colonies in areas where humans also concentrate. Since the birds feed on intermediate-sized fish that themselves concentrate pollutants, they can be used not only to assess the levels of contaminants in avian tissues but as indicators of contaminants in the environment. The concentration of heavy metals and selenium in the breast feathers of fledgling black-crowned night herons Nycticorax nycticorax and Chinese pond herons Ardeola bacchus from the Tu Jing Yan heronry outside Chengdu, Szechuan Province in China; and from fledgling black-crowned night heron, little egret Egretta garzetta, great egret Egretta alba and cattle egret Bubulcus ibis from the Mai Po heronry in Hong Kong, were determined. Breast feathers were also collected from adult great egrets in Hong Kong. Adult great egrets had significantly higher levels of all heavy metals than did young great egrets. There were no significant interspecific differences in metal levels among the young at Szechuan China, except for chromium (pond herons had higher levels). There were significant differences among the young nesting at Hong Kong for all metals examined. Great egrets had lower, and night herons had higher, levels of lead than the other young. Night herons also had the highest levels of cadmium, manganese, and selenium compared to the other young. Great egret chicks had the lowest mercury levels, while little egret had the highest levels. Lead levels for all the birds in both Hong Kong and Szechuan were among the highest in the world, and this was attributed to the continued use of leaded gasoline.

Levels of essential and non-essential metals in ginger (Zingiber officinale) cultivated in Ethiopia.

Science.gov (United States)

Wagesho, Yohannes; Chandravanshi, Bhagwan Singh

2015-01-01

Ginger (Zingiber officinale Roscoe) is a common condiment for various foods and beverages and widely used worldwide as a spice. Its extracts are used extensively in the food, beverage, and confectionary industries in the production of products such as marmalade, pickles, chutney, ginger beer, ginger wine, liquors, biscuits, and other bakery products. In Ethiopia, it is among the important spices used in every kitchen to flavor stew, tea, bread and local alcoholic drinks. It is also chiefly used medicinally for indigestion, stomachache, malaria, fevers, common cold, and motion sickness. The literature survey revealed that there is no study conducted on the determination of metals in ginger cultivated in Ethiopia. Hence it is worthwhile to determine the levels of essential and non-essential metals in ginger cultivated in Ethiopia. The levels of essential (Ca, Mg, Fe, Zn, Cu, Co, Cr, Mn, and Ni) and non-essential (Cd and Pb) metals in ginger (Zingiber officinale Roscoe) cultivated in four different regions of Ethiopia and the soil where it was grown were determined by flame atomic absorption spectrometry. 0.5 g of oven dried ginger and soil samples were digested using 3 mL of HNO3 and 1 mL of HClO4 at 210°C for 3 h and a mixture of 6 mL aqua-regia and 1.5 mL H2O2 at 270°C for 3 h, respectively. The mean metal concentration (μg/g dry weight basis) ranged in the ginger and soil samples, respectively, were: Ca (2000-2540, 1770-3580), Mg (2700-4090, 1460-2440), Fe (41.8-89.0, 21700-46900), Zn (38.5-55.2, 255-412), Cu (1.1-4.8, 3.80-33.9), Co (2.0-7.6, 48.5-159), Cr (6.0-10.8, 110-163), Mn (184-401, 1760-6470), Ni (5.6-8.4, 14.1-79.3) and Cd (0.38-0.97, 0.24-1.1). The toxic metal Pb was not detected in both the ginger and soil samples. There was good correlation between some metals in ginger and soil samples while poor correlation between other metals (Fe, Ni, Cu). This study revealed that Ethiopian gingers are good source of essential metals and free from toxic

Lithium inclusion in indium metal-organic frameworks showing increased surface area and hydrogen adsorption

Directory of Open Access Journals (Sweden)

Mathieu Bosch

2014-12-01

Full Text Available Investigation of counterion exchange in two anionic In-Metal-Organic Frameworks (In-MOFs showed that partial replacement of disordered ammonium cations was achieved through the pre-synthetic addition of LiOH to the reaction mixture. This resulted in a surface area increase of over 1600% in {Li [In(1,3 − BDC2]}n and enhancement of the H2 uptake of approximately 275% at 80 000 Pa at 77 K. This method resulted in frameworks with permanent lithium content after repeated solvent exchange as confirmed by inductively coupled plasma mass spectrometry. Lithium counterion replacement appears to increase porosity after activation through replacement of bulkier, softer counterions and demonstrates tuning of pore size and properties in MOFs.

Measurement of radioactivity and heavy metal levels in edible vegetables and their impact on Kuala Selangor communities of Peninsular Malaysia

International Nuclear Information System (INIS)

Asaduzzaman, Kh.; Khandaker, M.U.; Amin, Y.M.; Zainuddin, Z.; Farook, M.S.; Bradley, D.A.

2015-01-01

Vegetable is an essential daily diet item for the people of Malaysia. This work addressed the radiation and heavy metal exposure scenarios through the consumption of vegetables. Kuala Selangor is located in Sungai Selangor estuary in the west coast of Peninsular Malaysia, which is susceptible to pollution load due to the presence of large-scale industrial and human activities. Radioactivity and heavy metals level in human diet is of particular concern for the assessment of possible radiological and chemical hazards to human health. Therefore, a comprehensive study was carried out to determine the radioactivity levels ( 226 Ra, 228 Ra and 40 K) and heavy metal concentrations (Cr, As, Cd, Mn, Mg, Al, Sr, Rb, Sb, Ba, Hg, Fe, Ni, Zn, Cu, Bi and Pb) in 10 varieties of vegetable collected from different farmlands in Kuala Selangor region. The committed doses for 226 Ra, 228 Ra and 40 K due to consumption of vegetables were found 16.6±1.3, 23.6±1.7 and 58±5 μSv y -1 , respectively, with a total of 98±8 μSv y -1 . This dose imposes no significant threat to human health. The estimated cancer risk shows that probability of increase in cancer risk from daily intake of vegetables is only a minor fraction of International Commission on Radiological Protection values. The concentrations of heavy metal were below the daily intake recommended by the international organisations. (authors)

Effect of Internal Heteroatoms on Level Alignment at Metal/Molecular Monolayer/Si Interfaces

NARCIS (Netherlands)

Alon, Hadas; Garrick, Rachel; Pujari, Sidharam P.; Toledano, Tal; Sinai, Ofer; Kedem, Nir; Bendikov, Tatyana; Baio, Joe E.; Weidner, Tobias; Zuilhof, Han; Cahen, David; Kronik, Leeor; Sukenik, Chaim N.; Vilan, Ayelet

2018-01-01

Molecular monolayers at metal/semiconductor heterointerfaces affect electronic energy level alignment at the interface by modifying the interface's electrical dipole. On a free surface, the molecular dipole is usually manipulated by means of substitution at its external end. However, at an interface

Magnesium and trace metals: risk factors for coronary heart disease - associations between blood levels and angiographic findings

International Nuclear Information System (INIS)

Manthey, J.; Stoeppler, M.; Morgenstern, W.; Nussel, E.; Opherk, D.; Weintraut, A.; Wesch, H.; Kubler, W.

1981-01-01

A deficiency or an excessive intake of metals with cardiovascular effects is suspected to be involved in the pathogenesis of coronary heart disease (CHD) and sudden death. Therefore, in 106 patients undergoing coronary arteriography, serum levels of six essential metals (magnesium, chromium, copper, manganese, selenium and zinc) and whole blood concentrations of two elements without known essential function (cadmium and lead) were measured using atomic absorption spectrophotometry, including the flameless technique, or neutron activation analysis. Our results suggest that a deficiency of magnesium but not of the other metals studied may be present in patients with severe CHD; elevated serum copper and manganese levels do not play a role in the development of CHD in the sample of patients studied; and cigarette smoking may be associated with increased serum cadmium levels, which may explain in part the contribution of smoking to the risk of sudden death in patients with CHD

Free-Standing Metal Oxide Nanoparticle Superlattices Constructed with Engineered Protein Containers Show in Crystallo Catalytic Activity.

Science.gov (United States)

Lach, Marcel; Künzle, Matthias; Beck, Tobias

2017-12-11

The construction of defined nanostructured catalysts is challenging. In previous work, we established a strategy to assemble binary nanoparticle superlattices with oppositely charged protein containers as building blocks. Here, we show that these free-standing nanoparticle superlattices are catalytically active. The metal oxide nanoparticles inside the protein scaffold are accessible for a range of substrates and show oxidase-like and peroxidase-like activity. The stable superlattices can be reused for several reaction cycles. In contrast to bulk nanoparticle-based catalysts, which are prone to aggregation and difficult to characterize, nanoparticle superlattices based on engineered protein containers provide an innovative synthetic route to structurally defined heterogeneous catalysts with control over nanoparticle size and composition. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tissue metal levels in Muskrat (Ondatra zibethica) collected near the Sudbury (Ontario) ore-smelters; prospects for biomonitoring marsh pollution

Energy Technology Data Exchange (ETDEWEB)

Parker, G.H

2004-05-01

An examination of tissue metal levels in Sudbury-area muskrat (Ondatra zibethica) revealed that animals collected in the vicinity of the local ore-smelters contained elevated burdens of Cd and Ni in their liver and kidneys. Respective tissue concentrations averaged 2-fold and 3- to 6-fold higher than background values and are believed to reflect accumulations resulting from food chain contamination in regional marshes, including that reportedly characterizing Typha latifolia stands--their primary food source--and adherent sediments which may be consumed inadvertently while feeding. No evidence of site-influence or enhanced tissue metal levels was seen for Cu, Pb or Zn. While Cd : Ni accumulations were positively correlated in both the liver (r=0.78) and the kidneys (r=0.65), between-tissue comparisons indicated that hepatic : renal burdens were significantly correlated (r=0.75) only in the case of Ni. With the exception of 30-35% lower hepatic Zn levels in females relative to males within the Sudbury population, tissue metal levels did not vary according to sex or age class at either site. Our findings substantiate the potential of muskrat to serve as useful bioindicators/monitors of metal pollution in semi-aquatic environments. - Muskrats appear to be useful bioindicators of metal pollution in semi-aquatic environments.

Tissue metal levels in Muskrat (Ondatra zibethica) collected near the Sudbury (Ontario) ore-smelters; prospects for biomonitoring marsh pollution

International Nuclear Information System (INIS)

Parker, G.H.

2004-01-01

An examination of tissue metal levels in Sudbury-area muskrat (Ondatra zibethica) revealed that animals collected in the vicinity of the local ore-smelters contained elevated burdens of Cd and Ni in their liver and kidneys. Respective tissue concentrations averaged 2-fold and 3- to 6-fold higher than background values and are believed to reflect accumulations resulting from food chain contamination in regional marshes, including that reportedly characterizing Typha latifolia stands--their primary food source--and adherent sediments which may be consumed inadvertently while feeding. No evidence of site-influence or enhanced tissue metal levels was seen for Cu, Pb or Zn. While Cd : Ni accumulations were positively correlated in both the liver (r=0.78) and the kidneys (r=0.65), between-tissue comparisons indicated that hepatic : renal burdens were significantly correlated (r=0.75) only in the case of Ni. With the exception of 30-35% lower hepatic Zn levels in females relative to males within the Sudbury population, tissue metal levels did not vary according to sex or age class at either site. Our findings substantiate the potential of muskrat to serve as useful bioindicators/monitors of metal pollution in semi-aquatic environments. - Muskrats appear to be useful bioindicators of metal pollution in semi-aquatic environments

The effect of motion patterns on edge-loading of metal-on-metal hip resurfacing.

Science.gov (United States)

Mellon, S J; Kwon, Y-M; Glyn-Jones, S; Murray, D W; Gill, H S

2011-12-01

The occurrence of pseudotumours (soft tissue masses relating to the hip joint) following metal-on-metal hip resurfacing arthroplasty (MoMHRA) has been associated with high serum metal ion levels and consequently higher than normal bearing wear. We investigated the relationship between serum metal ion levels and contact stress on the acetabular component of MoMHRA patients for two functional activities; gait and stair descent. Four subjects with MoMHRA, who had their serum metal ion levels measured, underwent motion analysis followed by CT scanning. Their motion capture data was combined with published hip contact forces and finite element models representing 14% (peak force) and 60% (end of stance) of the gait cycle and 52% (peak force) of stair descent activity were created. The inclination angle of the acetabular component was increased by 10° in 1° intervals and the contact stresses were determined at each interval for each subject. When the inclination angle was altered in such a way as to cause the hip contact force to pass through the edge of the acetabular component edge-loading occurred. Edge-loading increased the contact stress by at least 50%; the maximum increase was 108%. Patients with low serum metal ion levels showed no increase in contact stress at peak force during gait or stair descent. Patients with high serum metal ion levels exhibited edge-loading with an increase to the inclination angle of their acetabular components. The increase in inclination angle that induced edge-loading for these subjects was less than the inter-subject variability in the angle of published hip contact forces. The results of this study suggest that high serum metal ion levels are the result of inclination angle influenced edge-loading but that edge-loading cannot be attributed to inclination angle alone and that an individual's activity patterns can reduce or even override the influence of a steep acetabular component and prevent edge-loading. Copyright © 2011 IPEM

Screening heavy metals levels in hair of sanitation workers by X-ray fluorescence analysis

International Nuclear Information System (INIS)

Md Khudzari, Jauharah; Wagiran, Husin; Hossain, I.; Ibrahim, Noorddin

2013-01-01

This work presents a study of human hair as a bio-indicator for detection of heavy metals as part of environmental health surveillance programs project to develop a subject of interest in the biomedical and environmental sciences. A total of 34 hair samples were analyzed that consisting of 29 samples from sanitation workers and five samples from students. The hair samples were prepared and treated in accordance to the International Atomic Energy Agency (IAEA) recommendations. The concentrations of heavy metals were analyzed using the energy dispersive X-ray fluorescence (EDXRF) technique by X-50 Mobile X-ray Fluorescence (XRF) at Oceanography Institute, Universiti Malaysia Terengganu. The performance of EDXRF analyzer was tested by Standard Reference Material (SRM 2711) Montana Soil which was in good agreement with certified value within 14% deviations except for Hg. While seven heavy metals: Mn, Fe, Ni, Cu, Zn, Se, and Sb were detected in both groups, three additional elements, i.e. As, Hg and Pb, were detected only in sanitation workers group. For sanitation workers group, the mean concentration of six elements, Mn, Fe, Cu, Zn, Se, and Sb, shows elevated concentration as compared to the control samples concentration. Results from both groups were compared and discussed in relation to their respective heavy metals concentrations. - Highlights: ► We determine heavy metals in hair sample of sanitation workers and control group. ► 7 heavy metals, Mn, Fe, Ni, Cu, Zn, Se, and Sb, were detected in both groups. ► Additional elements of As, Hg and Pb were discovered only in sanitation workers. ► Generally, mean concentration of sanitation workers show elevation in comparison. ► We report results in relation to their respective heavy metals concentrations.

Renormalization of Molecular Quasiparticle Levels at Metal-Molecule Interfaces: Trends across Binding Regimes

DEFF Research Database (Denmark)

Thygesen, Kristian Sommer; Rubio, Angel

2009-01-01

a microscopic model of the metal-molecule interface, we illustrate the basic features of this renormalization mechanism through systematic GW, Hartree-Fock, and Kohn-Sham calculations for the molecular energy levels as function of the model parameters. We identify two different polarization mechanisms: (i...

Year-to-year correlations in blood metal levels among individuals of two species of North American sea ducks

International Nuclear Information System (INIS)

Wayland, M.; Alisauskas, R.T.; Kellett, D.; Traylor, J.; Swoboda, C.; Neugebauer, E.; Mehl, K.

2007-01-01

Sea duck populations have declined in North America. Contaminants, especially metals, have been listed as possible contributing factors. Sea ducks are long-lived. Thus, individuals chronically exposed to elevated metal levels may be at greatest risk. Information about long-term exposure (≥1 year) of individuals to metals is absent. To address this information gap, we examined year-to-year correlations among individual White-Winged Scoters and King Eiders in levels of blood cadmium, lead, mercury and selenium. Positive correlations (r ≥ 0.43), were found in six, five, five and two of seven correlations for cadmium, selenium, lead and mercury. Thus, certain individuals of these species may be exposed over two or more years to higher levels of cadmium, selenium and lead (but apparently not mercury) than other individuals. Single blood samples are appropriate metrics of exposure for studies that examine long-term effects of certain metals on these birds. - Some individuals of two species of sea ducks experience greater long-term (≥1 year) exposure to cadmium, selenium and lead compared to other individuals

Model shows future cut in U.S. ozone levels

International Nuclear Information System (INIS)

Anon.

1991-01-01

A joint U.S. auto-oil industry research program says modeling shows that changing gasoline composition can reduce ozone levels for Los Angeles in 2010 and for New York City and Dallas-Fort Worth in 2005. The air quality modeling was based on vehicle emissions research data released late last year (OGJ, Dec. 24, 1990, p. 20). The effort is sponsored by the big three auto manufacturers and 14 oil companies. Sponsors the cars and small trucks account for about one third of ozone generated in the three cities studied but by 2005-10 will account for only 5-9%

Transition-metal impurities in semiconductors and heterojunction band lineups

Science.gov (United States)

Langer, Jerzy M.; Delerue, C.; Lannoo, M.; Heinrich, Helmut

1988-10-01

The validity of a recent proposal that transition-metal impurity levels in semiconductors may serve as a reference in band alignment in semiconductor heterojunctions is positively verified by using the most recent data on band offsets in the following lattice-matched heterojunctions: Ga1-xAlxAs/GaAs, In1-xGaxAsyP1-y/InP, In1-xGaxP/GaAs, and Cd1-xHgxTe/CdTe. The alignment procedure is justified theoretically by showing that transition-metal energy levels are effectively pinned to the average dangling-bond energy level, which serves as the reference level for the heterojunction band alignment. Experimental and theoretical arguments showing that an increasingly popular notion on transition-metal energy-level pinning to the vacuum level is unjustified and must be abandoned in favor of the internal-reference rule proposed recently [J. M. Langer and H. Heinrich, Phys. Rev. Lett. 55, 1414 (1985)] are presented.

Heavy metal pollution in coastal areas of South China: a review.

Science.gov (United States)

Wang, Shuai-Long; Xu, Xiang-Rong; Sun, Yu-Xin; Liu, Jin-Ling; Li, Hua-Bin

2013-11-15

Coastal areas of South China face great challenges due to heavy metal contamination caused by rapid urbanization and industrialization. In this paper, more than 90 articles on levels, distributions, and sources of heavy metals in sediments and organisms were collected to review the status of heavy metal pollution along coastal regions of South China. The results show that heavy metal levels were closely associated with local economic development. Hong Kong and the Pearl River Estuary were severely contaminated by heavy metals. However, concentrations of heavy metals in sediments from Hong Kong have continually decreased since the early 1990 s. High levels of heavy metals were found in biota from Lingdingyang in Guangdong province. Mollusks had higher concentrations of heavy metals than other species. Human health risk assessments suggested that levels of heavy metals in some seafood from coastal areas of South China exceeded the safety limit. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Wide-Range Tunable Level-Keeper Using Vertical Metal-Oxide-Semiconductor Field-Effect Transistors for Current-Reuse Systems

Science.gov (United States)

Tanoi, Satoru; Endoh, Tetsuo

2012-04-01

A wide-range tunable level-keeper using vertical metal-oxide-semiconductor field-effect transistors (MOSFETs) is proposed for current-reuse analog systems. The design keys for widening tunable range of the operation are a two-path feed-back and a vertical MOSFET with back-bias-effect free. The proposed circuit with the vertical MOSFETs shows the 1.23-V tunable-range of the input level with the 2.4-V internal-supply voltage (VDD) in the simulation. This tunable-range of the proposed circuit is 4.7 times wider than that of the conventional. The achieved current efficiency of the proposed level-keeper is 66% at the 1.2-V output with the 2.4-V VDD. This efficiency of the proposed circuit is twice higher than that of the traditional voltage down converter.

Heavy metals levels in muscle, gonads and gills of Brazilian fishes using SRTXRF

International Nuclear Information System (INIS)

Calza, Cristiane; Pereira, Marcelo O.; Lopes, Ricardo Tadeu; Anjos, Marcelino Jose dos; Araujo, Francisco Gerson

2005-01-01

This work evaluated heavy metals levels in selected tissues of G. brasiliensis, O. hepsetus, H. luetkeni and H. affinis collected at the Paraiba do Sul River, Brazil. The muscle analysis was performed to evaluate the possible transfer of heavy metals to human beings through fish consumption; gonads were used to study the possible transfer and/or influence of metals, through the reproductive processes, to later generations of fishes; and gills are considered the primary action site for most metals, which are absorbed through fish breathing and/or ionic exchanges. The digestion procedure of samples was performed with HNO 3 65% in Teflon bombs, with heating at about 120 deg C. The analysis, using Total Reflection X-Ray Fluorescence with Synchrotron Radiation (SRTXRF), was performed at the LNLS (Brazilian Synchrotron Light Laboratory) using white beam and a Si(Li) detector with resolution of 165 eV. The elements identified were: Ti, Cr, Mn, Fe, Co, Cu, Zn, Rb, Sr, Ba and Pb. Fe and Zn exhibited the highest concentrations in the four species investigated. Comparing the results with the Brazilian Food Legislation Cr, Cu, Zn and Pb exceeded the maximum permissible limits in fish tissues. (author)

Heavy metals levels in muscle, gonads and gills of Brazilian fishes using SRTXRF

Energy Technology Data Exchange (ETDEWEB)

Calza, Cristiane; Pereira, Marcelo O.; Lopes, Ricardo Tadeu [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Instrumentacao Nuclear]. E-mail: ccalza@lin.ufrj.br; ricardo@lin.ufrj.br; Anjos, Marcelino Jose dos [Universidade do Estado, Rio de Janeiro, RJ (Brazil). Inst. de Fisica]. E-mail: marcelin@lin.ufrj.br; Araujo, Francisco Gerson [Universidade Federal Rural do Rio de Janeiro, RJ (Brazil). Lab. de Ecologia de Peixes]. E-mail: gerson@uffrj.br

2005-07-01

This work evaluated heavy metals levels in selected tissues of G. brasiliensis, O. hepsetus, H. luetkeni and H. affinis collected at the Paraiba do Sul River, Brazil. The muscle analysis was performed to evaluate the possible transfer of heavy metals to human beings through fish consumption; gonads were used to study the possible transfer and/or influence of metals, through the reproductive processes, to later generations of fishes; and gills are considered the primary action site for most metals, which are absorbed through fish breathing and/or ionic exchanges. The digestion procedure of samples was performed with HNO{sub 3} 65% in Teflon bombs, with heating at about 120 deg C. The analysis, using Total Reflection X-Ray Fluorescence with Synchrotron Radiation (SRTXRF), was performed at the LNLS (Brazilian Synchrotron Light Laboratory) using white beam and a Si(Li) detector with resolution of 165 eV. The elements identified were: Ti, Cr, Mn, Fe, Co, Cu, Zn, Rb, Sr, Ba and Pb. Fe and Zn exhibited the highest concentrations in the four species investigated. Comparing the results with the Brazilian Food Legislation Cr, Cu, Zn and Pb exceeded the maximum permissible limits in fish tissues. (author)

Metal contamination in harbours impacts life-history traits and metallothionein levels in snails.

Directory of Open Access Journals (Sweden)

Maria Alexandra Bighiu

Full Text Available Harbours with limited water exchange are hotspots of contaminant accumulation. Antifouling paints (AF contribute to this accumulation by leaching biocides that may affect non-target species. In several leisure boat harbours and reference areas in the Baltic Sea, chronic exposure effects were evaluated using caging experiments with the snail Theodoxus fluviatilis. We analysed variations in ecologically relevant endpoints (mortality, growth and reproduction in concert with variation in metallothionein-like proteins (MTLP levels. The latter is a biomarker of exposure to metals, such as copper (Cu and zinc (Zn, which are used in AF paints as active ingredient and stabilizer, respectively. In addition, environmental samples (water, sediment were analysed for metal (Cu and Zn and nutrient (total phosphorous and nitrogen concentrations. All life-history endpoints were negatively affected by the exposure, with higher mortality, reduced growth and lower fecundity in the harbours compared to the reference sites. Metal concentrations were the key explanatory variables for all observed adverse effects, suggesting that metal-driven toxicity, which is likely to stem from AF paints, is a source of anthropogenic stress for biota in the harbours.

Polarization-induced renormalization of molecular levels at metallic and semiconducting surfaces

DEFF Research Database (Denmark)

García Lastra, Juan Maria; Rostgaard, Carsten; Rubio, A.

2009-01-01

On the basis of first-principles G0W0 calculations we systematically study how the electronic levels of a benzene molecule are renormalized by substrate polarization when physisorbed on different metallic and semiconducting surfaces. The polarization-induced reduction in the energy gap between oc...... find that error cancellations lead to remarkably good agreement between the G0W0 and Kohn-Sham energies for the occupied orbitals of the adsorbed molecule....

Low level control of metal belt CVT considering shift dynamics and ratio valve on-off characteristics

International Nuclear Information System (INIS)

Kim, Tal Chol; Kim, Hyun Soo

2000-01-01

In this paper, low level control algorithms of a metal belt CVT are suggested. A feedforward PID control algorithm is adopted for line pressure based on a steady state relationship between the input duty and the line pressure. Experimental results show that feedforward PID control of the line pressure guarantees a fast response while reducing the pressure undershoot which may result in belt slip. For ratio control, a fuzzy logic is suggested by considering the CVT shift dynamics and on-off characteristics of the ratio control valve. It is found from experimental results that a desired speed ratio can be achieved at steady state in spite of the fluctuating primary pressure. It is expected that the low level control algorithms for the line pressure and speed ratio suggested in this study can be implemented in a prototype CVT

Determination of Heavy Metal Levels in Various Industrial Waste Waters

Directory of Open Access Journals (Sweden)

Mustafa Şahin Dündar

2012-06-01

Full Text Available Important part of the environmetal pollution consists of waste water and water pollution. The water polluted by anthropogenical, industrial, and agricultural originated sources are defined as waste waters which are the main pollution sources for reservoirs, rivers, lakes, and seas. In this work, waste waters of leather, textile, automotive side, and metal plating industries were used to determine the levels of Cu, Zn, Cr, Pb and Ni by using Flame Atomic Absorption Spectrometer. As a result, highest mean levels of copper in supernatants of plating and textile industries were observed as 377,18 ng ml-1, respectively 103 ng ml-1 lead and 963,6 ng ml-1 nickel in plating industry, 1068,2 ng ml-1 zinc and 14557,1 ng ml-1 chromium in plating and leather industries were determined.

Levels of metals and semimetals in sedimentary cores in Bertioga Channel, Brazil

Science.gov (United States)

Sartoretto, J. R.; Salaroli, A.; Figueira, R. C.

2013-05-01

The Baixada Santista is one of the most exploited and populated regions of São Paulo state. During the last decades, due to intense industrialization the Baixada Santista has passed through a strong process of environmental degradation. Metals in sediments are persistent, present toxicity in varied concentrations and may be deposited reaching biota habitats. In this context, high concentrations of metals represent environmental concern to costal management. Bertioga Channel is part of this complex system and is known mainly by a wide adjacent mangrove area. The channel is 25 km long, connecting the upstream region of Santos estuary to the adjacent ocean through an inlet located at the city of Bertioga. Urban development generates the concern of potential waste influx from surrounding streams, generating deposits and contaminating surface sediments along the channel, which may lead to adjacent coastal issues. The objective of this study was to characterize the concentration of the following metals at Bertioga Channel sediments: Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sc, V and Zn. Five sediment cores were sampled along the channel and analyzed. Determination of metals concentration was based on methods SW 846 US EPA 3050B and EPA 7471. High As concentrations were observed at all cores, with considerable concentration similarity between the first and second sampling points. Analytical results showed that cores Bertioga 4 and Bertioga 5 have accumulated high quantity of metals and semimetals, mainly As, Cd and Cr. Normalization of concentration values showed low contamination at the cores. Nevertheless, As and Hg values indicated moderate to significant contamination at a few sampling points. Despite of the low probability of contamination demonstrated by the normalized values, increasing at the sediment surface of Enrichment Factor (ER), Pollution Load Index (PLI) and Sediment Pollution Index (SPI) parameters were observed. Results indicate that industrialization

Levels of Platinum Group Metals in Selected Species (Sarotherodon melanotheron, Chonophorus lateristriga, Macrobrachium vollenhovenii and Crassostrea tulipa in Some Estuaries and Lagoons Along the Coast of Ghana

Directory of Open Access Journals (Sweden)

D. K. Essumang

2010-01-01

Full Text Available The use of some biota as bioindicators of heavy metal pollution has been demonstrated as particularly adequate due to their capacity of bioconcentration. This study evaluated the levels of platinum group metals (PGMs in some selected species along the coastal belt of Ghana, using the neutron activation analysis (NAA method. The result was processed to evaluate pollution indices in order to map the distribution of the metals in those species in the lagoons and estuaries along the costal belt of Ghana. The analysis showed significant levels of all PGMs in blackchin tilapia (Sarotherodon melanotheron Cichlidae, brown goby (Chonophorus lateristriga Gobiidae, shrimp (Macrobrachium vollenhovenii Palaemonidae, and mangrove oysters (Crassostrea tulipa Ostreidae in the lagoons and river Pra estuary. However, the oysters showed an elevated mean concentration of 0.13 μ/g (dry weight Pd. From the pollution indices, most of the sampling sites registered mean contamination factor (CF values between 1.20 and 3.00 for Pt, Pd, and Rh. The pollution load index (PLI conducted also gave an average pollution index between 0.79 and 2.37, indicating progressive contamination levels. The results revealed that anthropogenic sources, industrial and hospital effluent, etc., together with vehicular emissions, could be the contributing factors to the deposition of PGMs along the Ghanaian coast.

Measurement of radioactivity and heavy metal levels in edible vegetables and their impact on Kuala Selangor communities of Peninsular Malaysia.

Science.gov (United States)

Asaduzzaman, Kh; Khandaker, M U; Amin, Y M; Zainuddin, Z; Farook, M S; Bradley, D A

2015-11-01

Vegetable is an essential daily diet item for the people of Malaysia. This work addressed the radiation and heavy metal exposure scenarios through the consumption of vegetables. Kuala Selangor is located in Sungai Selangor estuary in the west coast of Peninsular Malaysia, which is susceptible to pollution load due to the presence of large-scale industrial and human activities. Radioactivity and heavy metals level in human diet is of particular concern for the assessment of possible radiological and chemical hazards to human health. Therefore, a comprehensive study was carried out to determine the radioactivity levels ((226)Ra, (228)Ra and (40)K) and heavy metal concentrations (Cr, As, Cd, Mn, Mg, Al, Sr, Rb, Sb, Ba, Hg, Fe, Ni, Zn, Cu, Bi and Pb) in 10 varieties of vegetable collected from different farmlands in Kuala Selangor region. The committed doses for (226)Ra, (228)Ra and (40)K due to consumption of vegetables were found 16.6±1.3, 23.6±1.7 and 58±5 µSv y(-1), respectively, with a total of 98±8 µSv y(-1). This dose imposes no significant threat to human health. The estimated cancer risk shows that probability of increase in cancer risk from daily intake of vegetables is only a minor fraction of International Commission on Radiological Protection values. The concentrations of heavy metal were below the daily intake recommended by the international organisations. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Bioavailability of particulate metal to zebra mussels: biodynamic modelling shows that assimilation efficiencies are site-specific.

Science.gov (United States)

Bourgeault, Adeline; Gourlay-Francé, Catherine; Priadi, Cindy; Ayrault, Sophie; Tusseau-Vuillemin, Marie-Hélène

2011-12-01

This study investigates the ability of the biodynamic model to predict the trophic bioaccumulation of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) in a freshwater bivalve. Zebra mussels were transplanted to three sites along the Seine River (France) and collected monthly for 11 months. Measurements of the metal body burdens in mussels were compared with the predictions from the biodynamic model. The exchangeable fraction of metal particles did not account for the bioavailability of particulate metals, since it did not capture the differences between sites. The assimilation efficiency (AE) parameter is necessary to take into account biotic factors influencing particulate metal bioavailability. The biodynamic model, applied with AEs from the literature, overestimated the measured concentrations in zebra mussels, the extent of overestimation being site-specific. Therefore, an original methodology was proposed for in situ AE measurements for each site and metal. Copyright © 2011 Elsevier Ltd. All rights reserved.

Studying religious music at the grassroots level: a look into the discourse practices of Christian metal bands online

Directory of Open Access Journals (Sweden)

Henna Jousmäki

2013-01-01

Full Text Available Religious issues are studied in various ways, most prominently by sociologists of religion. This paper suggests that in today’s world of globally intersecting webs of people, places, ideas and action, scholars and readers interested in religion will find themselves benefiting from cross-disciplinary approaches which help them to conceptualize and describe today’s phenomena at different levels. This paper describes how the emerging discipline of the sociology of language and religion may be applied to studying Christian metal bands’ discourse online. Although previous studies give a good idea of the structures, practices and tendencies in and related to Christian metal, little is reported on what happens at the very micro-level of Christian metal – for example, how they represent themselves to their audiences, what they sing about, and what else they say and, importantly, how they say it. To fill this gap, Christian metal bands’ online presence is examined with a particular interest in how the bands utilize online spaces to build up Christian metal identity and culture with the help of textual, discursive, and multimodal resources. This includes a look at the online self-representation of Christian metal bands, a more detailed investigation of the uses of the Bible on bands’ websites, as well as perspectives on an important part of Christian metal; namely the lyrics.

A three year study of metal levels in skin biopsies of whales in the Gulf of Mexico after the Deepwater Horizon oil crisis.

Science.gov (United States)

Wise, John Pierce; Wise, James T F; Wise, Catherine F; Wise, Sandra S; Gianios, Christy; Xie, Hong; Walter, Ron; Boswell, Mikki; Zhu, Cairong; Zheng, Tongzhang; Perkins, Christopher; Wise, John Pierce

2018-02-01

In response to the explosion of the Deepwater Horizon and the massive release of oil that followed, we conducted three annual research voyages to investigate how the oil spill would impact the marine offshore environment. Most investigations into the ecological and toxicological impacts of the Deepwater Horizon Oil crisis have mainly focused on the fate of the oil and dispersants, but few have considered the release of metals into the environment. From studies of previous oil spills, other marine oil industries, and analyses of oil compositions, it is evident that metals are frequently encountered. Several metals have been reported in the MC252 oil from the Deepwater Horizon oil spill, including the nonessential metals aluminum, arsenic, chromium, nickel, and lead; genotoxic metals, such as these are able to damage DNA and can bioaccumulate in organisms resulting in persistent exposure. In the Gulf of Mexico, whales are the apex species; hence we collected skin biopsies from sperm whales (Physeter macrocephalus), short-finned pilot whales (Globicephala macrorhynchus), and Bryde's whales (Balaenoptera edeni). The results from our three-year study of monitoring metal levels in whale skin show (1) genotoxic metals at concentrations higher than global averages previously reported and (2) patterns for MC252-relevant metal concentrations decreasing with time from the oil spill. Copyright © 2017 Elsevier Inc. All rights reserved.

Declining metal levels at Foundry Cove (Hudson River, New York): Response to localized dredging of contaminated sediments

International Nuclear Information System (INIS)

Mackie, Joshua A.; Natali, Susan M.; Levinton, Jeffrey S.; Sanudo-Wilhelmy, Sergio A.

2007-01-01

This study examines the effectiveness of remediating a well-recognized case of heavy metal pollution at Foundry Cove (FC), Hudson River, New York. This tidal freshwater marsh was polluted with battery-factory wastes (1953-1979) and dredged in 1994-1995. Eight years after remediation, dissolved and particulate metals (Cd, Co, Cu, Pb, Ni, and Ag) were found to be lower than levels in the lower Hudson near New York City. Levels of metals (Co, Ni, Cd) on suspended particles were comparatively high. Concentrations of surface sediment Cd throughout the marsh system remain high, but have decreased both in the dredged and undredged areas: Cd was 2.4-230 mg/kg dw of sediment in 2005 vs. 109-1500 mg/kg in the same area in 1983. The rate of tidal export of Cd from FC has decreased by >300-fold, suggesting that dredging successfully stemmed a major source of Cd to the Hudson River. - Dredging of a hotspot of metal-contaminated sediment is associated with a recognizable local and river-wide decline in cadmium in the Hudson River, New York

Heavy metal pollution disturbs immune response in wild ant populations

International Nuclear Information System (INIS)

Sorvari, Jouni; Rantala, Liisa M.; Rantala, Markus J.; Hakkarainen, Harri; Eeva, Tapio

2007-01-01

Concern about the effects of environmental contaminants on immune function in both humans and wildlife is growing and practically nothing is known about this impact on terrestrial invertebrates, even though they are known to easily accumulate pollutants. We studied the effect of industrial heavy metal contamination on immune defense of a free-living wood ant (Formica aquilonia). To find out whether ants show an adapted immune function in a polluted environment, we compared encapsulation responses between local and translocated colonies. Local colonies showed higher heavy metal levels than the translocated ones but the encapsulation response was similar between the two groups, indicating that the immune system of local ants has not adapted to high contamination level. The encapsulation response was elevated in moderate whereas suppressed in high heavy metal levels suggesting higher risk for infections in heavily polluted areas. - Heavy metal pollution affects immune function in ants

Effects of sex on the levels of metals and metalloids in the hair of a group of healthy Spanish adolescents (13 to 16 years old).

Science.gov (United States)

Peña-Fernández, Antonio; Del Carmen Lobo-Bedmar, Maria; González-Muñoz, Maria José

2017-10-01

Human biomonitoring can be a reliable tool to protect the health of the citizens of major urban environments. Human hair may be an invaluable specimen to determine chronic exposure to any environmental contaminant in an individual, especially in the young population. However, different factors including a lack of studies that have established reference values for metals and metalloids (trace elements) in human scalp hair make the use of this matrix controversial. A monitoring study was performed to establish possible normal or tentative reference values of Al, As, Be, Cd, Cr, Cu, Hg, Mn, Pb, Sn, Ti, Tl and Zn in adolescents' (aged 13-16) hair who have lived since birth in Alcalá de Henares, Madrid region (Spain). Strict inclusion criteria were followed to study the effect of sex on the hair metal content, and the levels of the above contaminants were also studied in park topsoils from Alcalá de Henares. Scalp hair samples were collected from 96 healthy adolescents (28 boys and 68 girls), and reference values were calculated following the recommendations of the International Union of Pure and Applied Chemistry. The levels of Cd, Cu, Pb, Sn and Zn in hair of adolescents from Alcalá de Henares show a sex dependency, being significantly higher in female participants. Sex should be a factor taken into account when developing future reference values and hair metal content. Soil metal contamination was not correlated with the levels found in hair. To conclude, the values of metals and metalloids here analysed and discussed could be considered as tentative reference values for Spanish adolescents aged 13-16 years living in the Madrid region, and may be used to identify the level of exposure of adolescents in this Spanish region to the various metals and metalloids.

Radioactive metals disposal and recycling impact modelling

International Nuclear Information System (INIS)

Kemp, N.W.; Lunn, R.J.; Belton, V.; Kockar, I.

2014-01-01

Screening life cycle assessment models developed to investigate hypothetical disposal and recycling options for the Windscale Advanced Gas-cooled Reactor heat exchangers were used to generate more complex models addressing the main UK radioactive metals inventory. Both studies show there are significant environmental advantages in the metals recycling promoted by the current low level waste disposal policies, strategies and plans. Financial benefits from current metals treatment options are supported and offer even greater benefits when applied to the UK radioactive metals inventory as a whole. (authors)

Level of heavy metals in soils and lemon grass in Jos, Bukuru and ...

African Journals Online (AJOL)

Level of heavy metals in soils and lemon grass in Jos, Bukuru and environs, Nigeria. SJ Salami, EA Akande, DM Zachariah. Abstract. No Abstract. Global Journal of Pure and Applied Sciences Vol. 13 (2) 2007: pp. 193-196. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT ...

Core-level spectra and binding energies of transition metal nitrides by non-destructive x-ray photoelectron spectroscopy through capping layers

Energy Technology Data Exchange (ETDEWEB)

Greczynski, G., E-mail: grzgr@ifm.liu.se [Thin Film Physics Division, Department of Physics (IFM), Linköping University, SE-581 83 Linköping (Sweden); Primetzhofer, D. [Department of Physics and Astronomy, The Ångström Laboratory, Uppsala University, P.O. Box 516, SE-751 20 Uppsala (Sweden); Lu, J.; Hultman, L. [Thin Film Physics Division, Department of Physics (IFM), Linköping University, SE-581 83 Linköping (Sweden)

2017-02-28

values. These spectra-modifying effects of Ar{sup +} ion bombardment increase with increasing the metal atom mass due to an increasing nitrogen-to-metal sputter yield ratio. The superior quality of the XPS spectra obtained in a non-destructive way from capped TMN films is evident from that numerous metal peaks, including Ti 2p, V 2p, Zr 3d, and Hf 4f, exhibit pronounced satellite features, in agreement with previously published spectra from layers grown and analyzed in situ. In addition, the N/metal concentration ratios are found to be 25–90% higher than those obtained from the corresponding ion-etched surfaces, and in most cases agree very well with the RBS and ToF-E ERDA values. The N 1 s BE:s extracted from capped TMN films, thus characteristic of a native surface, show a systematic trend, which contrasts with the large BE spread of literature “reference” values. Hence, non-destructive core level XPS employing capping layers provides an opportunity to obtain high-quality spectra, characteristic of virgin in situ grown and analyzed TMN films, although with larger versatility, and allows for extracting core level BE values that are more reliable than those obtained from sputter-cleaned N-deficient surfaces. Results presented here, recorded from a consistent set of binary TMN’s grown under the same conditions and analyzed in the same instrument, provide a useful reference for future XPS studies of multinary materials systems allowing for true deconvolution of complex core level spectra.

Core-level spectra and binding energies of transition metal nitrides by non-destructive x-ray photoelectron spectroscopy through capping layers

International Nuclear Information System (INIS)

Greczynski, G.; Primetzhofer, D.; Lu, J.; Hultman, L.

2017-01-01

spectra-modifying effects of Ar + ion bombardment increase with increasing the metal atom mass due to an increasing nitrogen-to-metal sputter yield ratio. The superior quality of the XPS spectra obtained in a non-destructive way from capped TMN films is evident from that numerous metal peaks, including Ti 2p, V 2p, Zr 3d, and Hf 4f, exhibit pronounced satellite features, in agreement with previously published spectra from layers grown and analyzed in situ. In addition, the N/metal concentration ratios are found to be 25–90% higher than those obtained from the corresponding ion-etched surfaces, and in most cases agree very well with the RBS and ToF-E ERDA values. The N 1 s BE:s extracted from capped TMN films, thus characteristic of a native surface, show a systematic trend, which contrasts with the large BE spread of literature “reference” values. Hence, non-destructive core level XPS employing capping layers provides an opportunity to obtain high-quality spectra, characteristic of virgin in situ grown and analyzed TMN films, although with larger versatility, and allows for extracting core level BE values that are more reliable than those obtained from sputter-cleaned N-deficient surfaces. Results presented here, recorded from a consistent set of binary TMN’s grown under the same conditions and analyzed in the same instrument, provide a useful reference for future XPS studies of multinary materials systems allowing for true deconvolution of complex core level spectra.

Evaluation of heavy metals level (arsenic, nickel, mercury and lead effecting on health in drinking water resource of Kohgiluyeh county using geographic information system (GIS

Directory of Open Access Journals (Sweden)

Abdolazim Alinejad

2016-08-01

Full Text Available This study was conducted to determine the amount of heavy metals (Arsenic, Nickel, Mercury, and Lead in drinking water resource of Kohgiluyeh County using Geographic Information System (GIS. This cross-sectional study was conducted on drinking water resource of Kohgiluyeh County (33 water supplies and 4 heavy metals in 2013. 264 samples were analyzed in this study. The experiments were performed at the laboratory of Water and Wastewater Company based on Standard Method. The Atomic Adsorption was used to evaluate the amount of heavy metals. The results were mapping by Geographic Information System software (GIS 9.3 after processing of parameters. Finally, the data were analyzed by SPSS 16 and Excel 2007. The maximum amount of each heavy metal and its resource were shown as follow: Nickel or Ni (Source of w12, 124ppb, Arsenic or As (w33, 42 ppb, Mercury or Hg (w22 and w30, 96ppb, Lead or Pb (w21, 1553ppb. Also, the GIS maps showed that Lead in the central region was very high, Mercury and Arsenic in the northern region were high and Nickel in the eastern and western regions was high. The Kriging method and Gauss model were introduced as best method for interpolation of these metals. Since the concentration of these heavy metals was higher than standard levels in most drinking water supplies in Kohgiluyeh County and these high levels of heavy metals can cause the adverse effects on human health; therefore, the environmental and geological studies are necessary to identify the pollution resource and elimination and removal of heavy metals

The effect of platform switching on the levels of metal ion release from different implant–abutment couples

Science.gov (United States)

Alrabeah, Ghada O; Knowles, Jonathan C; Petridis, Haralampos

2016-01-01

The improved peri-implant bone response demonstrated by platform switching may be the result of reduced amounts of metal ions released to the surrounding tissues. The aim of this study was to compare the levels of metal ions released from platform-matched and platform-switched implant–abutment couples as a result of accelerated corrosion. Thirty-six titanium alloy (Ti-6Al-4V) and cobalt–chrome alloy abutments were coupled with titanium cylinders forming either platform-switched or platform-matched groups (n=6). In addition, 18 unconnected samples served as controls. The specimens were subjected to accelerated corrosion by static immersion in 1% lactic acid for 1 week. The amount of metal ions ion of each test tube was measured using inductively coupled plasma mass spectrometry. Scanning electron microscope (SEM) images and energy dispersive spectroscopy X-ray analyses were performed pre- and post-immersion to assess corrosion at the interface. The platform-matched groups demonstrated higher ion release for vanadium, aluminium, cobalt, chrome, and molybdenum compared with the platform-switched groups (Pabutment size or connection (Pabutment platform surfaces. In conclusion, implant–abutment couples underwent an active corrosion process resulting in metal ions release into the surrounding environment. The highest amount of metal ions released was recorded for the platform-matched groups, suggesting that platform-switching concept has a positive effect in reducing the levels of metal ion release from the implant–abutment couples. PMID:27357323

Mechanics of metal-catecholate complexes: The roles of coordination state and metal types

Science.gov (United States)

Xu, Zhiping

2013-01-01

There have been growing evidences for the critical roles of metal-coordination complexes in defining structural and mechanical properties of unmineralized biological materials, including hardness, toughness, and abrasion resistance. Their dynamic (e.g. pH-responsive, self-healable, reversible) properties inspire promising applications of synthetic materials following this concept. However, mechanics of these coordination crosslinks, which lays the ground for predictive and rational material design, has not yet been well addressed. Here we present a first-principles study of representative coordination complexes between metals and catechols. The results show that these crosslinks offer stiffness and strength near a covalent bond, which strongly depend on the coordination state and type of metals. This dependence is discussed by analyzing the nature of bonding between metals and catechols. The responsive mechanics of metal-coordination is further mapped from the single-molecule level to a networked material. The results presented here provide fundamental understanding and principles for material selection in metal-coordination-based applications. PMID:24107799

Characterization, source identification and apportionment of selected metals in TSP in an urban atmosphere.

Science.gov (United States)

Shah, Munir H; Shaheen, N; Jaffar, M

2006-03-01

To understand the metal distribution characteristics in the atmosphere of urban Islamabad, total suspended particulate (TSP) samples were collected on daily 12 h basis, at Quaid-i-Azam University campus, using high volume sampler. The TSP samples were treated with HNO(3)/HClO(4) based wet digestion method for the quantification of eight selected metals; Fe, Zn, Pb, Mn, Cr, Co, Ni and Cd by FAAS method. The monitoring period ran from June 2001 to January 2002, with a total of 194 samples collected on cellulose filters. Effects of different meteorological conditions such as temperature, relative humidity, wind speed and wind direction on selected metal levels were interpreted by means of multivariate statistical approach. Enhanced metal levels for Fe (930 ng/m(3)), Zn (542 ng/m(3)) and Pb (210 ng/m(3)) were found on the mean scale while Mn, Cr, Co and Ni emerged as minor contributors. Statistical correlation study was also conducted and a strong correlation was observed between Pb-Cr (r=0.611). The relative humidity showed some significant influence on atmospheric metal distribution while other meteorological parameters showed weak relationship with TSP metal levels. Regarding the origin of sources of heavy metals in TSP, the statistical procedure identified three source profiles; automobile emissions, industrial/metallurgical units, and natural soil dust. The metal levels were also compared with those reported for other parts of the world which showed that the metal levels in urban atmosphere of Islamabad are in exceedence than those of European industrial and urban sites while comparable with some Asian sites.

Surface shift of the occupied and unoccupied 4f levels of the rare-earth metals

Science.gov (United States)

Aldén, M.; Johansson, B.; Skriver, H. L.

1995-02-01

The surface energy shifts of the occupied and unoccupied 4f levels for the lanthanide metals have been calculated from first principles by means of a Green's-function technique within the tight-binding linear muffin-tin orbitals method. We use the concept of complete screening to identify the occupied and unoccupied 4f energy level shifts as the surface segregation energy of a 4fn-1 and 4fn+1 impurity atom, respectively, in a 4fn host metal. The calculations include both initial- and final-state effects and give values that are considerably lower than those measured on polycrystalline samples as well as those found in previous initial-state model calculations. The present theory agrees well with very recent high-resolution, single-crystal film measurements for Gd, Tb, Dy, Ho, Er, Tm, and Lu. We furthermore utilize the unique possibility offered by the lanthanide metals to clarify the roles played by the initial and the different final states of the core-excitation process, permitted by the fact that the so-called initial-state effect is identical upon 4f removal and 4f addition. Surface energy and work function calculations are also reported.

Levels of trace metals in water and sediment from Tyume River and ...

African Journals Online (AJOL)

Higher levels of Cd (0.038 ± 0.004 to 0.044 ± 0.003 mg/l) and Pb (0.021 ± 0.004 to 0.035 ± 0.001 mg/l) were found in the river water, which may be detrimental to the “health” of the aquatic ecosystem and the rural communities that utilise the river water for ... Key words: trace metals, water, sediment, farmland, Tyume River

Effects of the interleukin-6 (IL-6) polymorphism on toxic metal and trace element levels in placental tissues

International Nuclear Information System (INIS)

Kayaalti, Zeliha; Tekin, Deniz; Aliyev, Vugar; Yalcin, Serap; Kurtay, Guelay; Soeylemezoglu, Tuelin

2011-01-01

The placenta is a crucial organ of fetal origin that functions in providing nutrients to the fetus from the mother. During pregnancy, the need for essential micronutrients, such as Fe and Zn, increases due to the requirements of the growing fetus. Maternal Fe deficiency induces an increase in Cu levels and can also affect cytokine levels in the placenta. On the other hand, Cu deficiency, although not as common, can also have destructive effects on the fetus. Interleukin-6 (IL-6) is a pleiotropic cytokine with a wide range of biological activities, including such as immune responses, acute-phase reactions, and inflammation. The placenta produces a significant amount of IL-6 during pregnancy. The effects of the IL-6 -174 G/C single nucleotide polymorphism (SNP) on IL-6 gene transcription and on plasma cytokine levels were assessed in the present study. We investigated the association between the IL-6 -174 G/C polymorphism and trace element/toxic metal levels in placental tissues. For the purposes of this study, 95 healthy volunteers were evaluated. Presence of the IL-6 polymorphism was determined using the standard polymerase chain reaction (PCR)-restriction fragment length polymorphism (RFLP) technique, and metal levels were analyzed by atomic absorption spectrometry (AAS). Based on our data, there were no significant associations between the IL-6 -174 G/C polymorphism and Pb, Cd, Fe, or Zn levels in the placental tissues (p > 0.05), but a statistically significant association was detected between the polymorphism and Cu levels (p = 0.016). We determined that the mean Cu levels in the placental tissues from individuals with GG, GC and CC genotypes were 5.62 ± 1.98, 6.22 ± 3.22 and 8.00 ± 1.32 ppm, respectively, whereas the overall mean Cu level from the placental tissues was 5.98 ± 2.51 ppm. - Highlights: → We studied between the association of IL-6 polymorphism and metal levels in the placenta tissues. → It was the first report evaluating the association

Evaluation of the effect of divalent metal transporter 1 gene polymorphism on blood iron, lead and cadmium levels

Energy Technology Data Exchange (ETDEWEB)

Kayaaltı, Zeliha, E-mail: kayaalti@ankara.edu.tr; Akyüzlü, Dilek Kaya; Söylemezoğlu, Tülin

2015-02-15

Divalent metal transporter 1 (DMT1), a member of the proton-coupled metal ion transporter family, mediates transport of ferrous iron from the lumen of the intestine into the enterocyte and export of iron from endocytic vesicles. It has an affinity not only for iron but also for other divalent cations including manganese, cobalt, nickel, cadmium, lead, copper, and zinc. DMT1 is encoded by the SLC11a2 gene that is located on chromosome 12q13 in humans and express four major mammalian isoforms (1A/+IRE, 1A/-IRE, 2/+IRE and 2/-IRE). Mutations or polymorphisms of DMT1 gene may have an impact on human health by disturbing metal trafficking. To study the possible association of DMT1 gene with the blood levels of some divalent cations such as iron, lead and cadmium, a single nucleotide polymorphism (SNP) (IVS4+44C/A) in DMT1 gene was investigated in 486 unrelated and healthy individuals in a Turkish population by method of polymerase chain reaction–restriction fragment length polymorphism (PCR–RFLP). The genotype frequencies were found as 49.8% homozygote typical (CC), 38.3% heterozygote (CA) and 11.9% homozygote atypical (AA). Metal levels were analyzed by dual atomic absorption spectrometer system and the average levels of iron, lead and cadmium in the blood samples were 446.01±81.87 ppm, 35.59±17.72 ppb and 1.25±0.87 ppb, respectively. Individuals with the CC genotype had higher blood iron, lead and cadmium levels than those with AA and CA genotypes. Highly statistically significant associations were detected between IVS4+44 C/A polymorphism in the DMT1 gene and iron and lead levels (p=0.001 and p=0.036, respectively), but no association was found with cadmium level (p=0.344). This study suggested that DMT1 IVS4+44 C/A polymorphism is associated with inter-individual variations in blood iron, lead and cadmium levels. - Highlights: • DMT1 IVS4+44 C/A polymorphism is associated with inter-individual variations in blood iron, cadmium and lead levels. �

Evaluation of the effect of divalent metal transporter 1 gene polymorphism on blood iron, lead and cadmium levels

International Nuclear Information System (INIS)

Kayaaltı, Zeliha; Akyüzlü, Dilek Kaya; Söylemezoğlu, Tülin

2015-01-01

Divalent metal transporter 1 (DMT1), a member of the proton-coupled metal ion transporter family, mediates transport of ferrous iron from the lumen of the intestine into the enterocyte and export of iron from endocytic vesicles. It has an affinity not only for iron but also for other divalent cations including manganese, cobalt, nickel, cadmium, lead, copper, and zinc. DMT1 is encoded by the SLC11a2 gene that is located on chromosome 12q13 in humans and express four major mammalian isoforms (1A/+IRE, 1A/-IRE, 2/+IRE and 2/-IRE). Mutations or polymorphisms of DMT1 gene may have an impact on human health by disturbing metal trafficking. To study the possible association of DMT1 gene with the blood levels of some divalent cations such as iron, lead and cadmium, a single nucleotide polymorphism (SNP) (IVS4+44C/A) in DMT1 gene was investigated in 486 unrelated and healthy individuals in a Turkish population by method of polymerase chain reaction–restriction fragment length polymorphism (PCR–RFLP). The genotype frequencies were found as 49.8% homozygote typical (CC), 38.3% heterozygote (CA) and 11.9% homozygote atypical (AA). Metal levels were analyzed by dual atomic absorption spectrometer system and the average levels of iron, lead and cadmium in the blood samples were 446.01±81.87 ppm, 35.59±17.72 ppb and 1.25±0.87 ppb, respectively. Individuals with the CC genotype had higher blood iron, lead and cadmium levels than those with AA and CA genotypes. Highly statistically significant associations were detected between IVS4+44 C/A polymorphism in the DMT1 gene and iron and lead levels (p=0.001 and p=0.036, respectively), but no association was found with cadmium level (p=0.344). This study suggested that DMT1 IVS4+44 C/A polymorphism is associated with inter-individual variations in blood iron, lead and cadmium levels. - Highlights: • DMT1 IVS4+44 C/A polymorphism is associated with inter-individual variations in blood iron, cadmium and lead levels. �

Effect of multiple metal resistant bacteria from contaminated lake sediments on metal accumulation and plant growth

International Nuclear Information System (INIS)

Li, Kefeng; Ramakrishna, Wusirika

2011-01-01

Naturally occurring bacteria play an important role in bioremediation of heavy metal pollutants in soil and wastewater. This study identified high levels of resistance to zinc, cesium, lead, arsenate and mercury in eight copper resistant Pseudomonas strains previously isolated from Torch Lake sediment. These strains showed variable susceptibility to different antibiotics. Furthermore, these metal resistant strains were capable of bioaccumulation of multiple metals and solubilization of copper. Bacterial strains TLC 3-3.5-1 and TLC 6-6.5-1 showed high bioaccumulation ability of Zn (up to 15.9 mg/g dry cell) and Pb (80.7 mg/g dry cell), respectively. All the strains produced plant growth promoting indole-3-acetic acid (IAA), iron chelating siderophore and solubilized mineral phosphate and metals. The effect of bacterial inoculation on plant growth and copper uptake by maize (Zea mays) and sunflower (Helianthus annuus) was investigated using one of the isolates (Pseudomonas sp. TLC 6-6.5-4) with higher IAA production and phosphate and metal soubilization, which resulted in a significant increase in copper accumulation in maize and sunflower, and an increase in the total biomass of maize. The multiple metal-resistant bacterial isolates characterized in our study have potential applications for remediation of metal contaminated soils in combination with plants and metal contaminated water.

Effect of multiple metal resistant bacteria from contaminated lake sediments on metal accumulation and plant growth

Energy Technology Data Exchange (ETDEWEB)

Li, Kefeng [Department of Biological Sciences, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931 (United States); Ramakrishna, Wusirika, E-mail: wusirika@mtu.edu [Department of Biological Sciences, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931 (United States)

2011-05-15

Naturally occurring bacteria play an important role in bioremediation of heavy metal pollutants in soil and wastewater. This study identified high levels of resistance to zinc, cesium, lead, arsenate and mercury in eight copper resistant Pseudomonas strains previously isolated from Torch Lake sediment. These strains showed variable susceptibility to different antibiotics. Furthermore, these metal resistant strains were capable of bioaccumulation of multiple metals and solubilization of copper. Bacterial strains TLC 3-3.5-1 and TLC 6-6.5-1 showed high bioaccumulation ability of Zn (up to 15.9 mg/g dry cell) and Pb (80.7 mg/g dry cell), respectively. All the strains produced plant growth promoting indole-3-acetic acid (IAA), iron chelating siderophore and solubilized mineral phosphate and metals. The effect of bacterial inoculation on plant growth and copper uptake by maize (Zea mays) and sunflower (Helianthus annuus) was investigated using one of the isolates (Pseudomonas sp. TLC 6-6.5-4) with higher IAA production and phosphate and metal soubilization, which resulted in a significant increase in copper accumulation in maize and sunflower, and an increase in the total biomass of maize. The multiple metal-resistant bacterial isolates characterized in our study have potential applications for remediation of metal contaminated soils in combination with plants and metal contaminated water.

Determination of Heavy Metals in Freshwater Fishes of the Tigris River in Baghdad

Directory of Open Access Journals (Sweden)

Montazer Mensoor

2018-06-01

Full Text Available The presence of heavy metals in freshwater fish represents a global public health issue. The current study aimed to determine the heavy metal concentration and toxicity in some freshwater fish species collected from the Tigris River in Baghdad. Out of the many fish species in Iraq, the current study selected the Genus Barbus as it represents the most popular fish food in Iraq. The sample included twenty fishes and the selected sample locations covered two industrial areas in Baghdad (one north of Baghdad and one south of Baghdad. The levels of heavy metals were determined by using an atomic absorption spectrophotometer (AAS. The results showed that concentrations of heavy metals in the sampled fishes exceeded the acceptable levels for food sources for human consumption. The results of this study showed high levels of cadmium and chromium levels in the tissues of the selected fish sample. Cd and Cr were among the highest concentrations and both exceeded the World Health Organization and Food and Agriculture Organization of the United Nations acceptable levels for heavy metals in fishes.

Heavy metal and natural radionuclide levels in urban soils from Cienfuegos city, Cuba

International Nuclear Information System (INIS)

Diaz Rizo, Oscar; Quintana Miranda, Eduardo; D Alessandro Rodriguez, Katia; Lopez Pino, Neivy; Arado Lopez, Juana O.; Alonso Hernandez, Carlos M.; Cartas Aguila, Hector

2013-01-01

Concentrations of heavy metals and natural radionuclides in topsoil (0-10cm) from Cienfuegos city, Cuba, were determined by using X-ray fluorescence analysis and gamma ray spectrometry, respectively. The measured results of heavy metals show that the mean concentrations of Ni, Cu, Zn and Pb in the studied soil samples are higher than their corresponding background values. The calculated results of integrated pollution index of heavy metals indicate that the studied soils present severely heavy metal contamination. The concentrations of 226Ra, 232Th and 40K in the studied soil samples range from 8.3 to 32.7, 3.7 to 10.7 and 129 to 356 Bq.kg-1 with an average of 22.6, 6.3 and 272 Bq.kg-1 , respectively, which are similar than the average concentrations reported for South-central Cuban soils. The air absorbed dose rate and the annual effective dose equivalent received by the local residents due to the natural radionuclides in soil are lesser than the worldwide established limits. A significantly positive 232Th-Cu and 232Th-Zn correlations were determined, indicating the possible presence of these elements pollution source in the area.(author)

Metals in coastal zones impacted with urban and industrial wastes: Insights on the metal accumulation pattern in fish species

Science.gov (United States)

La Colla, Noelia S.; Botté, Sandra E.; Marcovecchio, Jorge E.

2018-05-01

The pollution of aquatic environments is a worldwide problem of difficult solution since these areas are used for the disposal and dilution of anthropogenic wastes. This study evaluated the concentrations of Cd, Cu, Ni and Zn in the gills, liver and muscle tissues of six economically important fish species from the Bahía Blanca estuary in Argentina, a coastal environment that is under anthropogenic pressure. Metal contents in 147 fish samples were determined by digestion and a subsequent analysis with an ICP OES. The concentrations (μg/g, wet weight) of each metal in the fish tissues ranged from below the limit of detection for the four metals to 5.2 in the case of Cd, 340 for Cu, 20 for Ni, and 101 for Zn. The results suggested that metal burden in fishes varied with the species and metal elements, with Cd, Cu and Zn mean maximum accumulation towards the liver tissue. Ni showed a high number of samples with concentrations below the limit of detection. Among species, Cynoscion guatucupa was found to have the highest concentrations of Cu and Zn in the liver tissues, whereas the gills and liver tissues of Mustelus schmitti showed the lowest levels of Ni and Zn. As regards the human health risks, two samples of muscle tissue belonging to C. guatucupa reached to Cd levels that exceeded the permissible levels for human consumption. Moreover, the estimated daily intakes calculated suggest that people would not experience significant health risks from the intake of individual metals through fish consumption.

Comparison of void strengthening in fcc and bcc metals: Large-scale atomic-level modelling

International Nuclear Information System (INIS)

Osetsky, Yu.N.; Bacon, D.J.

2005-01-01

Strengthening due to voids can be a significant radiation effect in metals. Treatment of this by elasticity theory of dislocations is difficult when atomic structure of the obstacle and dislocation is influential. In this paper, we report results of large-scale atomic-level modelling of edge dislocation-void interaction in fcc (copper) and bcc (iron) metals. Voids of up to 5 nm diameter were studied over the temperature range from 0 to 600 K. We demonstrate that atomistic modelling is able to reveal important effects, which are beyond the continuum approach. Some arise from features of the dislocation core and crystal structure, others involve dislocation climb and temperature effects

Partially filled Landau level at even denominators: A vortex metal with a Berry phase

Science.gov (United States)

You, Yizhi

2018-04-01

We develop a vortex metal theory for a partially filled Landau level at ν =1/2 n whose ground state contains a composite Fermi surface formed by the vortex of electrons. In the projected Landau-level limit, the composite Fermi surface contains a -π/n Berry phase. Such a fractional Berry phase is a consequence of Landau-level projection which produces the Girvin-MacDonald-Platzman [S. M. Girvin, A. H. MacDonald, and P. M. Platzman, Phys. Rev. B 33, 2481 (1986), 10.1103/PhysRevB.33.2481] guiding center algebra and embellishes an anomalous velocity to the equation of motion for the vortex metal. Further, we investigate a particle-hole symmetric bilayer system with ν1=1/2 n and ν2=1 -1/2 n at each layer, and demonstrate that the -π/n Berry phase on the composite Fermi surface leads to the suppression of 2 kf backscattering between the particle-hole partner bilayer, which could be a smoking gun to detect the fractional Berry phase. We also mention various instabilities and competing orders in such bilayer systems, including a Z4 n topological order phase driven by quantum criticality.

Observation of coherent population transfer in a four-level tripod system with a rare-earth-metal-ion-doped crystal

International Nuclear Information System (INIS)

Goto, Hayato; Ichimura, Kouichi

2007-01-01

Coherent population transfer in a laser-driven four-level system in a tripod configuration is experimentally investigated with a rare-earth-metal-ion-doped crystal (Pr 3+ :Y 2 SiO 5 ). The population transfers observed here indicate that a main process inducing them is not optical pumping, which is an incoherent process inducing population transfer. Moreover, numerical simulation, which well reproduces the experimental results, also shows that the process inducing the observed population transfers is similar to stimulated Raman adiabatic passage (STIRAP) in the sense that this process possesses characteristic features of STIRAP

Constrained-DFT method for accurate energy-level alignment of metal/molecule interfaces

KAUST Repository

Souza, A. M.

2013-10-07

We present a computational scheme for extracting the energy-level alignment of a metal/molecule interface, based on constrained density functional theory and local exchange and correlation functionals. The method, applied here to benzene on Li(100), allows us to evaluate charge-transfer energies, as well as the spatial distribution of the image charge induced on the metal surface. We systematically study the energies for charge transfer from the molecule to the substrate as function of the molecule-substrate distance, and investigate the effects arising from image-charge confinement and local charge neutrality violation. For benzene on Li(100) we find that the image-charge plane is located at about 1.8 Å above the Li surface, and that our calculated charge-transfer energies compare perfectly with those obtained with a classical electrostatic model having the image plane located at the same position. The methodology outlined here can be applied to study any metal/organic interface in the weak coupling limit at the computational cost of a total energy calculation. Most importantly, as the scheme is based on total energies and not on correcting the Kohn-Sham quasiparticle spectrum, accurate results can be obtained with local/semilocal exchange and correlation functionals. This enables a systematic approach to convergence.

Constrained-DFT method for accurate energy-level alignment of metal/molecule interfaces

KAUST Repository

Souza, A. M.; Rungger, I.; Pemmaraju, C. D.; Schwingenschlö gl, Udo; Sanvito, S.

2013-01-01

We present a computational scheme for extracting the energy-level alignment of a metal/molecule interface, based on constrained density functional theory and local exchange and correlation functionals. The method, applied here to benzene on Li(100), allows us to evaluate charge-transfer energies, as well as the spatial distribution of the image charge induced on the metal surface. We systematically study the energies for charge transfer from the molecule to the substrate as function of the molecule-substrate distance, and investigate the effects arising from image-charge confinement and local charge neutrality violation. For benzene on Li(100) we find that the image-charge plane is located at about 1.8 Å above the Li surface, and that our calculated charge-transfer energies compare perfectly with those obtained with a classical electrostatic model having the image plane located at the same position. The methodology outlined here can be applied to study any metal/organic interface in the weak coupling limit at the computational cost of a total energy calculation. Most importantly, as the scheme is based on total energies and not on correcting the Kohn-Sham quasiparticle spectrum, accurate results can be obtained with local/semilocal exchange and correlation functionals. This enables a systematic approach to convergence.

Levels of selected essential and non-essential metals in seeds of korarima (Aframomum corrorima cultivated in Ethiopia

Directory of Open Access Journals (Sweden)

Birhanu Mekassa

2015-06-01

Full Text Available SummaryThe levels of essential (Ca, Mg, Fe, Zn, Cu, Co, Cr, Mn and Ni and non-essential (Cd and Pb metals were determined by flame atomic absorption spectrometry in samples of korarima (Aframomum corrorima seeds and the corresponding soils collected from southern and southwestern Ethiopia. A wet digestion procedure involving the use of 3 mL of HNO3 (69-72% and 1 mL of HClO4 (70% were used to solubilize the metals from the korarima seed samples, and a modified aqua regia (HCl:HNO3 reagent with added hydrogen peroxide (6 mL of aqua regia and 1.5 mL of H2O2 was used for the soil samples. The levels of the nutrients in the korarima seed samples were in the following ranges: Ca (1794-2181; Mg (1626-2067; Mn (141-180; Fe (37-46; Zn (12-18; Ni (6.6-8.5; Cu (5.8-8.3; Cr (3.8-5.8 and Co (2.0-2.3 in µg g–1, respectively. The concentration of non-essential cadmium was in the range from 0.9-1 µg g–1 while that of lead was below the detection limit of the method. There was good correlation between the levels of some metals (Ni, Fe, Cd, Ca, Cu, Mg in the korarima seeds and soil samples but poor correlation between other metals (Cr, Zn, Mn, Co.

A multi-level code for metallurgical effects in metal-forming processes

Energy Technology Data Exchange (ETDEWEB)

Taylor, P.A.; Silling, S.A. [Sandia National Labs., Albuquerque, NM (United States). Computational Physics and Mechanics Dept.; Hughes, D.A.; Bammann, D.J.; Chiesa, M.L. [Sandia National Labs., Livermore, CA (United States)

1997-08-01

The authors present the final report on a Laboratory-Directed Research and Development (LDRD) project, A Multi-level Code for Metallurgical Effects in metal-Forming Processes, performed during the fiscal years 1995 and 1996. The project focused on the development of new modeling capabilities for simulating forging and extrusion processes that typically display phenomenology occurring on two different length scales. In support of model fitting and code validation, ring compression and extrusion experiments were performed on 304L stainless steel, a material of interest in DOE nuclear weapons applications.

Microbial community composition and functions are resilient to metal pollution along two forest soil gradients.

Science.gov (United States)

Azarbad, Hamed; Niklińska, Maria; Laskowski, Ryszard; van Straalen, Nico M; van Gestel, Cornelis A M; Zhou, Jizhong; He, Zhili; Wen, Chongqing; Röling, Wilfred F M

2015-01-01

Despite the global importance of forests, it is virtually unknown how their soil microbial communities adapt at the phylogenetic and functional level to long-term metal pollution. Studying 12 sites located along two distinct gradients of metal pollution in Southern Poland revealed that functional potential and diversity (assessed using GeoChip 4.2) were highly similar across the gradients despite drastically diverging metal contamination levels. Metal pollution level did, however, significantly impact bacterial community structure (as shown by MiSeq Illumina sequencing of 16S rRNA genes), but not bacterial taxon richness and community composition. Metal pollution caused changes in the relative abundance of specific bacterial taxa, including Acidobacteria, Actinobacteria, Bacteroidetes, Chloroflexi, Firmicutes, Planctomycetes and Proteobacteria. Also, a group of metal-resistance genes showed significant correlations with metal concentrations in soil. Our study showed that microbial communities are resilient to metal pollution; despite differences in community structure, no clear impact of metal pollution levels on overall functional diversity was observed. While screens of phylogenetic marker genes, such as 16S rRNA genes, provide only limited insight into resilience mechanisms, analysis of specific functional genes, e.g. involved in metal resistance, appears to be a more promising strategy. © FEMS 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Embedding of solid high-level wastes into metal and non-metal matrices

International Nuclear Information System (INIS)

Geel, J. van; Eschrich, H.; Dobbels, F.; Favre, P.; Sterner, H.

1980-03-01

The primary objective of embedding solidification high-level waste forms of high specific activity into a matrix material is to obtain final waste composites with moderate inner temperatures, even at large waste loadings per meter cylinder length. Secondary objectives are to produce a non-porous, crack-free composite product with a durability superior to that of the embedded waste form itself. The temperature distribution in composite material composed of vitreous beads embedded into a metal matrix (vitromets) are compared with that in a vitreous block, of equal heat generation per meter height, during short- and long-term storage. It was found that for storage under water, inner temperatures below 100 0 C are assured in vitromets, produced from short-cooled high-level wastes, and containing high waste loadings per metercanister height. The chemical and mechanical stability, as well as the thermal conductivity have been examined for vitromets containing various matrix materials whereby emphasis is imparted to lead- and aluminum alloys. The corrosion of lead- and aluminum alloys in distilled water, brine solution and dry salt has been examined at temperatures up to 230 0 C and pressures up to 3.5 MPa. Some lead alloys were found to exhibit superior corrosion resistance in these chemical environments than certain reference borosilicate glasses. The deformation behavior of vitromets under axial compression has been investigated at different temperatures and varying height diameter ratios. The maturity of the vitromet production is finally demonstrated by presenting process data from hot-laboratory scale and cold semi-industrial scale production units. (author)

Levels of heavy metals in liver and kidney of dogs from urban environment

Directory of Open Access Journals (Sweden)

M. Esposito

2012-04-01

Full Text Available Lead, cadmium and mercury were detected in liver and kidney tissue of dogs from an urban habitat. Samples were digested in a microwave system and analyzed by atomic absorption spectroscopy. Results of the current study showed that at least one of the three heavy metals was detected in tissues of all examined dogs. These findings make us suppose that humans are exposed to the same heavy metals similar to those of dogs that are exposed since they share the same environment. Mercury concentrations detected in kidney of household dogs were higher than stray dogs, therefore the involvement of pet food in exposure to mercury can be supposed.

Additive Manufacturing: Reproducibility of Metallic Parts

Directory of Open Access Journals (Sweden)

Konda Gokuldoss Prashanth

2017-02-01

Full Text Available The present study deals with the properties of five different metals/alloys (Al-12Si, Cu-10Sn and 316L—face centered cubic structure, CoCrMo and commercially pure Ti (CP-Ti—hexagonal closed packed structure fabricated by selective laser melting. The room temperature tensile properties of Al-12Si samples show good consistency in results within the experimental errors. Similar reproducible results were observed for sliding wear and corrosion experiments. The other metal/alloy systems also show repeatable tensile properties, with the tensile curves overlapping until the yield point. The curves may then follow the same path or show a marginal deviation (~10 MPa until they reach the ultimate tensile strength and a negligible difference in ductility levels (of ~0.3% is observed between the samples. The results show that selective laser melting is a reliable fabrication method to produce metallic materials with consistent and reproducible properties.

Seabird feathers as monitors of the levels and persistence of heavy metal pollution after the Prestige oil spill

International Nuclear Information System (INIS)

Moreno, Rocio; Jover, Lluis; Diez, Carmen; Sanpera, Carola

2011-01-01

We measured heavy metal concentrations in yellow-legged gulls (n = 196) and European shags (n = 189) in order to assess the temporal pattern of contaminant exposure following the Prestige oil spill in November 2002. We analysed Pb, Cu, Zn, Cr, Ni and V levels in chick feathers sampled at four colonies during seven post-spill years (2003-2009), and compared results with pre-spill levels obtained from feathers of juvenile shag corpses (grown in spring/summer 2002). Following the Prestige wreck, Cu (4.3-10 μg g -1 ) and Pb concentrations (1.0-1.4 μg g -1 ) were, respectively, between two and five times higher than pre-spill levels (1.5-3.6 and 0.1-0.4 μg g -1 ), but returned to previous background concentrations after three years. Our study highlights the suitability of chick feathers of seabirds for assessing the impact of oil spills on heavy metal contamination, and provides the best evidence to date on the persistence of oil pollution after the Prestige incident. - Highlights: → Seabirds as sentinel species of levels and persistence of heavy metal pollution after oil spills. → Pb, Cu, Zn, Cr, Ni, V in chick feathers of Phalacrocorax aristotelis and Larus michahellis. → Chronic oil pollution in the marine food web for at least three years after the Prestige oil spill. - Monitoring heavy metal in seabird feathers indicated chronic oil pollution in the marine food web for at least three years after the Prestige oil spill.

Fatal Cobalt Toxicity after a Non-Metal-on-Metal Total Hip Arthroplasty

Directory of Open Access Journals (Sweden)

Rinne M. Peters

2017-01-01

Full Text Available This case illustrates the potential for systemic cobalt toxicity in non-metal-on-metal bearings and its potentially devastating consequences. We present a 71-year-old male with grinding sensations in his right hip following ceramic-on-ceramic total hip arthroplasty (THA. After diagnosing a fractured ceramic liner, the hip prosthesis was revised into a metal-on-polyethylene bearing. At one year postoperatively, X-rays and MARS-MRI showed a fixed reversed hybrid THA, with periarticular densities, flattening of the femoral head component, and a pattern of periarticular metal wear debris and pseudotumor formation. Before revision could take place, the patient was admitted with the clinical picture of systemic cobalt toxicity, supported by excessively high serum cobalt and chromium levels, and ultimately died. At autopsy dilated cardiomyopathy as cause of death was hypothesized. A third body wear reaction between ceramic remnants and the metal femoral head very likely led to excessive metal wear, which contributed systemic cobalt toxicity leading to neurotoxicity and heart failure. This case emphasizes that fractured ceramic-on-ceramic bearings should be revised to ceramic-on-ceramic or ceramic-on-polyethylene bearings, but not to metal-on-polyethylene bearings. We aim to increase awareness among orthopedic surgeons for clinical clues for systemic cobalt intoxication, even when there is no metal-on-metal bearing surface.

Cadmium-mediated resistance to metals and antibiotics in a cyanobacterium

Energy Technology Data Exchange (ETDEWEB)

Singh, S.P.; Pandey, A.K.

1982-01-01

Cadmium-resistant strains of the cyanobacterium Nostoc calcicola were isolated through the step-wise transfer of the organism to higher levels of the metal. One of the Cd-resistant strains (CDsup(r)-10) showed cross-resistance to antibiotics like neomycin (1 ..mu..g/ml), chloramphenicol (3 ..mu..g/ml) but not to streptomycin. The Cd-resistant strain also tolerated elevated levels of metals such as zinc 20 ppm) and mercury (1 ppm). The stability of the metal-resistance required the presence of Cd/sup 2 +/ ions in the growth medium. It is suggested that metal resistance may also be determined by gene(s) on the antibiotic resistance plasmids in cyanobacteria.

Heavy metals in soils along unpaved roads in south west Cameroon: Contamination levels and health risks.

Science.gov (United States)

Ngole-Jeme, Veronica M

2016-04-01

Soils enriched with heavy metals from vehicular emission present a significant exposure route of heavy metals to individuals using unpaved roads. This study assessed the extent of Cd, Cr, Co, Cu, Ni, Pb and Zn contamination of soils along unpaved roads in Cameroon, and the health risks presented by incidental ingestion and dermal contact with the soils using metal contamination factor (CF) pollution load index, hazard quotients (HQ) and chronic hazard index (CHI). CF values obtained (0.9-12.2) indicate moderate to high contamination levels. HQ values for Cr, Cd and Pb exceeded the reference doses. Moderate health hazard exists for road users in the areas with intense anthropogenic activities and high average daily traffic (ADT) volume according to CHI values (1-4) obtained. The economy and quality of life in cities with unpaved roads could be threatened by health challenges resulting from long-term exposure to heavy metal derived from high ADT volumes.

Biomonitoring levels of airborne metals around Urmia Lake using deciduous trees and evaluation of their tolerance for greenbelt development.

Science.gov (United States)

Mohammadi, Amir; Mokhtari, Mehdi; Arani, Asghar Mosleh; Taghipour, Hassan; Hajizadeh, Yaghoub; Fallahzadeh, Hossein

2018-05-16

In the northwest of Iran, the dust of salty and toxic metals possibly caused due to drying Urmia Lake is threatening the health of surrounding communities. This study aimed to employ leaves of local deciduous trees for biomonitoring of toxic elements and to evaluate air pollution tolerance of the trees for greenbelt application. Sampling from leaves of four dominant tree species including Vitis vinifera, Juglans regia, Ulmus umbraculifera, and Popolus alba was carried out from gardens in two radial distances (5 and 10 km) around the Urmia Lake accounting for 16 sites. The concentration of metals in the leaves were extracted according to method USEPA method 3050B and measured by ICP AES technique. According to the levels of air pollution tolerance index (APTI), Popolus alba showed to be more sensitive to air pollution and can be applied for biomonitoring. The ranks of heavy metals and sodium concentrations in the leaves gained in the order of Na > Zn > Cu > Ni > Pb > As > Cd. The mean enrichment factor for the elements was calculated from 1 to 3, suggesting minor enrichment for them. As, Pb, and Na with similar spatial distribution were dominantly observed in northwest and center-east of the Urmia Lake. Potential ecological risk (PER) index showed a moderate risk in 6% of sampling zones, where Cd and As were identified as responsible pollutants. Principle component and correlation analysis between the elements depicted human sources such as industrial activity and road traffic for Cd, Cu, Ni, Pb, and Zn, whereas As and Na were most likely originated from the aerosols of Urmia Lake. Our findings showed that Popolus alba can be applied as a local biomonitor and Vitis vinifera with moderate tolerance can be used as a good air pollutant sink in greenbelt development around the drying Urmia Lake in the northwest of Iran.

Parkinson Disease Protein DJ-1 Binds Metals and Protects against Metal-induced Cytotoxicity*

Science.gov (United States)

Björkblom, Benny; Adilbayeva, Altynai; Maple-Grødem, Jodi; Piston, Dominik; Ökvist, Mats; Xu, Xiang Ming; Brede, Cato; Larsen, Jan Petter; Møller, Simon Geir

2013-01-01

The progressive loss of motor control due to reduction of dopamine-producing neurons in the substantia nigra pars compacta and decreased striatal dopamine levels are the classically described features of Parkinson disease (PD). Neuronal damage also progresses to other regions of the brain, and additional non-motor dysfunctions are common. Accumulation of environmental toxins, such as pesticides and metals, are suggested risk factors for the development of typical late onset PD, although genetic factors seem to be substantial in early onset cases. Mutations of DJ-1 are known to cause a form of recessive early onset Parkinson disease, highlighting an important functional role for DJ-1 in early disease prevention. This study identifies human DJ-1 as a metal-binding protein able to evidently bind copper as well as toxic mercury ions in vitro. The study further characterizes the cytoprotective function of DJ-1 and PD-mutated variants of DJ-1 with respect to induced metal cytotoxicity. The results show that expression of DJ-1 enhances the cells' protective mechanisms against induced metal toxicity and that this protection is lost for DJ-1 PD mutations A104T and D149A. The study also shows that oxidation site-mutated DJ-1 C106A retains its ability to protect cells. We also show that concomitant addition of dopamine exposure sensitizes cells to metal-induced cytotoxicity. We also confirm that redox-active dopamine adducts enhance metal-catalyzed oxidation of intracellular proteins in vivo by use of live cell imaging of redox-sensitive S3roGFP. The study indicates that even a small genetic alteration can sensitize cells to metal-induced cell death, a finding that may revive the interest in exogenous factors in the etiology of PD. PMID:23792957

Heavy metals in sea turtles

Energy Technology Data Exchange (ETDEWEB)

Witkowski, S.A. (Millersville State College, PA); Frazier, J.G.

1982-07-01

Bone and barnacle samples from sea turtles (Hepidochelys olivacea) in Ecuador were analyzed for manganese, iron, copper, zinc and lead. Analysis was performed by flame atomic absorption spectroscopy. Results show that zinc and iron levels in bone and barnacles were greater than copper, manganese and lead levels. The significance of the findings is difficult to interpret because so little is known about baseline levels and physiological effects of heavy metals in the animals. (JMT)

Levels of potentially toxic metals in water, sediment and peat from Wonderfonteinspruit, North West Province, South Africa.

Science.gov (United States)

Nsaka, Ntumba C; McCrindle, Robert I; Ambushe, Abayneh A

2018-04-30

Environmental monitoring of the levels of potentially toxic metals is of importance because of possible adverse effects on living species. This study was conducted to assess the levels of Cd, Cr, Cu, Hg, Mn, Pb, U and V in water, sediment and peat samples collected from the region of Wonderfonteinspruit. Water samples were simply filtered and acidified with HNO 3 prior to analysis. Sediment and peat were oven-dried, ground, sieved and mineralised using a microwave digestion system. Concentrations of the selected elements in all samples were determined by inductively coupled plasma-mass spectrometry. A Zeeman mercury analyser was also used for quantification of Hg in the same sediment and peat samples. The method validation was carried out using SRM 1643e water and BCR 320R sediment certified reference materials. The results showed no significant difference at 95% level of confidence between the certified and measured values after using the Student's t-test. The levels of Cd, Cr, Cu, Pb, V and U found in rivers and dams were lower than the tentative South African water quality range guideline for domestic and irrigation purposes. However, water from dams and certain rivers was unsuitable for irrigation and domestic use.

Heavy metals, PAHs and toxicity in stormwater wet detention ponds

DEFF Research Database (Denmark)

Wium-Andersen, Tove; Nielsen, Asbjørn Haaning; Hvitved-Jacobsen, Thorkild

2011-01-01

Concentrations of 6 different heavy metals and total Polycyclic Aromatic Hydrocarbons (PAH) were determined in stormwater runoff and in the pond water of two Danish wet detention ponds. The pond water samples were analyzed for toxic effects, using the algae Selenastrum capricornutum as a test...... organism. Stormwater and pond water from a catchment with light industry showed high levels of heavy metals, especially zinc and copper. The pond water showed high toxic effects and copper were found to be the main toxicant. Additionally, a large part of the copper was suspected to be complex bound......, reducing the potential toxicity of the metal. Another catchment (residential) produced stormwater and pond water with moderate concentration of heavy metals. The pond water occasionally showed toxic effects but no correlation between heavy metals and toxicity was identified. PAHs concentrations were...

Metal spectra as indicators of development

Science.gov (United States)

Graedel, T. E.; Cao, J.

2010-01-01

We have assembled extensive information on the cycles of seven industrial metals in 49 countries, territories, or groups of countries, drawn from a database of some 200,000 material flows, and have devised analytical approaches to treat the suite of metals as composing an approach to a national “materials metabolism.” We demonstrate that in some of the more developed countries, per capita metal use is more than 10 times the global average. Additionally, countries that use more than the per capita world average of any metal do so for all metals, and vice versa, and countries that are above global average rates of use are very likely to be above global average rates at all stages of metal life cycles from fabrication onward. We show that all countries are strongly dependent on international trade to supply the spectrum of nonrenewable resources that modern technology requires, regardless of their level of development. We also find that the rate of use of the spectrum of metals stock is highly correlated to per capita gross domestic product, as well as to the Human Development Index and the Global Competitiveness Innovation Index. The implication is that as wealth and technology increase in developing countries, strong demand will be created not for a few key resources, but across the entire spectrum of the industrial metals. Long-term metal demand can be estimated given gross domestic product projections; the results suggest overall metal flow into use in 2050 of 5–10 times today’s level should supplies permit. PMID:21098309

Minor and trace metals levels in human milk in north western cities of Libya

International Nuclear Information System (INIS)

Mahabbis, M. T.; Elkubat, M. S.; Kut, H. M.

2009-01-01

Levels of twelve minor and trace metals were determined by using (AAS, ES and ICP/MS) in breast milk obtained from 60 women living in north western cities of Libya. Samples were collected at one week up to two years after delivery. Women with age>21 years old to an age of <43 years old were investigated. (Author)

Effect of heavy metals on the level of vitamin E, total lipid and glycogen reserves in the liver of common carp (Cyprinus carpio L.

Directory of Open Access Journals (Sweden)

Vinodhini Rajamanickam

2008-06-01

Full Text Available The aim of this study is to examine some changes in the biochemical profile of the liver tissue of common carp (Cyprinus carpio L. exposed to a sublethal concentration of heavy metal mixture (cadmium, chromium, nickel and lead. The biochemical profile, specifically glycogen, total lipid and vitamin E content in the liver tissue was examined and compared to that of the control group. The exposed group showed a marked decline in glycogen and vitamin E reserves. Conversely an increase in total lipid in comparison to control was observed. The result reflects the sensitivity of these biochemical parameters to the effects of sublethal levels of combined heavy metals for this the widely consumed freshwater fish.

Temporal trends (1989–2011) in levels of mercury and other heavy metals in feathers of fledgling great egrets nesting in Barnegat Bay, NJ

International Nuclear Information System (INIS)

Burger, Joanna

2013-01-01

There is an abundance of data for levels of metals from a range of species, but relatively few long-term time series from the same location. In this paper I examine the levels of arsenic, cadmium, chromium, lead, manganese, mercury and selenium in feathers from fledgling great egrets (Ardea alba) collected at nesting colonies in Barnegat Bay, New Jersey from 1989 to 2011. The primary objectives were to test the null hypotheses that (1) There were no temporal differences in metal levels in feathers of fledgling great egrets, and (2) Great egrets nesting in different areas of Barnegat Bay (New Jersey) did not differ in metal levels. There were significant yearly variations in levels of all heavy metals in feathers of fledgling great egret, but levels decreased significantly from 1989 to 2011 only for lead (1470 ppb to 54.3 ppb), cadmium (277 ppb to 30.5 ppb), and manganese (only since 1996; 2669 ppb to 329 ppb)). Although mercury levels decreased from 2003–2008 (6430 ppb to 1042 ppb), there was no pattern before 2003, and levels increased after 2008 to 2610 ppb in 2011. Lead, cadmium, chromium, manganese and mercury were higher in feathers from great egrets nesting in the northern part of the bay, and selenium was highest in feathers from mid-bay. The lack of a temporal decline in mercury levels in feathers of great egrets is cause for concern, since the high levels in feathers from some years (means as high as 6430 ppb) are in the range associated with adverse effects (5000 ppb for feathers). -- Highlights: ► Metals were monitored in feathers of great egrets from Barnegat Bay, New Jersey. ► Levels of cadmium and lead decreased significantly from 1989–2011. ► Mercury levels in feathers from great egrets did not decline from 1989–2011. ► Metal levels were generally higher in great egrets and black-crowned night heron feathers than in snowy egrets

Background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean): An approach based on 133Cs normalization and lead isotope measurements

International Nuclear Information System (INIS)

Roussiez, Vincent; Ludwig, Wolfgang; Probst, Jean-Luc; Monaco, Andre

2005-01-01

This paper presents an attempt to reach natural background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean). To correct for the grain-size effect, normalization procedures based on a clay mineral indicator element are commonly used, after a first grain size separation by sieving. In our study, we tested the applicability of this method with respect to commonly used normalizer elements, and found that stable Cs shows the best ability to reflect the fine sediment fraction. Background levels were successfully reached for Co, Cr, Cu, Ni and Pb, compared to various literature references. Nevertheless, in the case of lead, the normalized data depicted a general enrichment in all samples, and the natural levels could only be reached when concentrations were corrected for the atmospheric contribution by analysing lead isotope ratios. Also for Zn, a general enrichment was found in our samples, although less important. - Among several potential normalizers, stable Cs ( 133 Cs) depicted the best ability to correct for the grain-size effect of shelf sediments and was used to estimate regional background levels of heavy metals

Apparatus for controlling coolant level in a liquid-metal-cooled nuclear reactor

International Nuclear Information System (INIS)

Jones, R.D.

1978-01-01

A liquid-metal-cooled fast-breeder reactor which has a thermal liner spaced inwardly of the pressure vessel and includes means for passing bypass coolant through the annulus between the thermal liner and the pressure vessel to insulate the pressure vessel from hot outlet coolant includes control ports in the thermal liner a short distance below the normal operating coolant level in the reactor and an overflow nozzle in the pressure vessel below the control ports connected to an overflow line including a portion at an elevation such that overflow coolant flow is established when the coolant level in the reactor is above the top of the coolant ports. When no makeup coolant is added, bypass flow is inwardly through the control ports and there is no overflow; when makeup coolant is being added, coolant flow through the overflow line will maintain the coolant level

Apparatus for controlling coolant level in a liquid-metal-cooled nuclear reactor

Science.gov (United States)

Jones, Robert D.

1978-01-01

A liquid-metal-cooled fast-breeder reactor which has a thermal liner spaced inwardly of the pressure vessel and includes means for passing bypass coolant through the annulus between the thermal liner and the pressure vessel to insulate the pressure vessel from hot outlet coolant includes control ports in the thermal liner a short distance below the normal operating coolant level in the reactor and an overflow nozzle in the pressure vessel below the control ports connected to an overflow line including a portion at an elevation such that overflow coolant flow is established when the coolant level in the reactor is above the top of the coolant ports. When no makeup coolant is added, bypass flow is inwardly through the control ports and there is no overflow; when makeup coolant is being added, coolant flow through the overflow line will maintain the coolant level.

Risk Assessment of Heavy Metal Pollution in Soils of Gejiu Tin Ore and Other Metal Deposits of Yunnan Province

Science.gov (United States)

Yang, Shuran; Danek, Tomas; Cheng, Xianfeng; Huang, Qianrui

2017-12-01

This paper aims to study three main metal mining areas in Yunnan Province, to summarize and analyze the heavy metal pollution situation in each mining area, and to assess the ecological risk of the mining areas. The results showed that heavy metal pollution existed in different regions of the three mining areas with pollution elements of Cd, As, Cu, Pb, Zn. Risk level, besides Zhen Yuan mining area (class C), for the other two areas was class D, with Beichang mining area in Lanping as the most serious polluted mining area.

High level waste containing granules coated and embedded in metal as an alternative to HLW glasses

International Nuclear Information System (INIS)

Neumann, W.

1980-01-01

Simulated high level waste containing granules were overcoated with pyrocarbon or nickel respectively. The coatings were performed by the use of chemical vapour deposition in a fluidized bed. The coated granules were embedded in an aluminium-silicon-alloy to improve the dissipation of radiation induced heat. The metal-granules-composites obtained were of improved product stability related to the high level waste containing glasses. (orig.) [de

Economic comparison of management modes for contaminated metal scrap

International Nuclear Information System (INIS)

Janberg, K.

1987-01-01

This report presents an economic study of the three following management modes for contaminated metal scrap: - decontamination of scrap metal followed by release, - direct melting of scrap metal, followed by release or restricted reuse, - super-compaction followed by disposal as radioactive waste. The present study, which refers to conditions prevailing in Germany, includes reviews of the contaminated scrap arisings, of experience with scrap management and of the licensing conditions for metal recycling. The results obtained during the treatment of more than 140 t of contaminated scrap metal show that: - super-compaction is the best procedure for all mixed metallic wastes of small dimensions and complex geometries, as decontamination is very costly in such a case and the melting would lead to undefined metallurgical products; - decontamination is recommendable for simple geometries and activities higher than the regulatory upper limit for melting in an industrial foundry (74 Bq/g); - direct melting for lower activity levels is gaining in competitiveness and has a good chance to be the best solution, in particular when the free use levels will be reduced below the currently accepted levels in Germany

Assessment of annual air pollution levels with PM1, PM2.5, PM10 and associated heavy metals in Algiers, Algeria.

Science.gov (United States)

Talbi, Abdelhamid; Kerchich, Yacine; Kerbachi, Rabah; Boughedaoui, Ménouèr

2018-01-01

Concentrations of particulate matter less than 1  μm, 2.5  μm, 10 μm and their contents of heavy metals were investigated in two different stations, urban and roadside at Algiers (Algeria). Sampling was conducted during two years by a high volume samplers (HVS) equipped with a cascade impactor at four levels stage, for one year sampling. The characterization of the heavy metals associated to the particulate matter (PM) was carried out by X-Ray Fluorescence analysis (XRF). The annual average concentration of PM 1 , PM 2.5 and PM 10 in both stations were 18.24, 32.23 and 60.01 μg m -3 respectively. The PM 1 , PM 2.5 and PM 10 concentrations in roadside varied from 13.46 to 25.59 μg m -3 , 20.82-49.85 μg m -3 and 45.90-77.23 μg m -3 respectively. However in the urban station, the PM 1 , PM 2.5 and PM 10 concentrations varied from 10.45 to 26.24 μg m -3 , 18.53-47.58 μg m -3 and 43.8-91.62 μg m -3 . The heavy metals associated to the PM were confirmed by Scanning Electron Microscopy-Energy Dispersive X-Ray analyses (SEM-EDX). The different spots of PM 2.5 analysis by SEM-EDX shows the presence of nineteen elements with anthropogenic and natural origins, within the heavy metal detected, the lead was found with maximum of 5% (weight percent). In order to determine the source contributions of PM levels at the two sampling sites sampling, principal compound analysis (PCA) was applied to the collected data. Statistical analysis confirmed anthropogenic source with traffic being a significant source and high contribution of natural emissions. At both sites, the PM 2.5 /PM 10 ratio is lower than that usually recorded in developed countries. The study of the back-trajectories of the air masses starting from Sahara shows that desert dust influences the concentration and the composition of the PM measured in Algiers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Abrasive blasting, a technique for the industrial decontamination of metal components and concrete blocks from decommissioning to unconditional release levels

International Nuclear Information System (INIS)

Gills, R.; Lewandowski, P.; Ooms, B.; Reusen, N.; Van Laer, W.; Walthery, R.

2007-01-01

When decommissioning nuclear installations, large quantities of metal components are produced as well as significant amounts of other radioactive materials, which mostly show low surface contamination. Having been used or having been brought for a while in a controlled area marks them as 'suspected material'. In view of the very high costs for radioactive waste processing and disposal, alternatives have been considered, and much effort has gone to recycling through decontamination, melting and unconditional release of metals. In a broader context, recycling of materials can considered to be a first order ecological priority in order to limit the quantities of radioactive wastes for final disposal and to reduce the technical and economic problems involved with the management of radioactive wastes. It will help as well to make economic use of primary material and to conserve natural resources of basic material for future generations. In a demonstration programme, Belgoprocess has shown that it is economically interesting to decontaminate metal components to unconditional release levels using dry abrasive blasting techniques, the unit cost for decontamination being only 30 % of the global cost for radioactive waste treatment, conditioning, storage and disposal. As a result, an industrial dry abrasive blasting unit was installed in the Belgoprocess central decontamination infrastructure. At the end of December 2006, more than 1,128 Mg of contaminated metal has been treated as well as 313 Mg of concrete blocks. The paper gives an overview of the experience relating to the decontamination of metal material and concrete blocks at the decommissioning of the Eurochemic reprocessing plant in Dessel, Belgium as well from the decontamination of concrete containers by abrasive blasting. (authors)

High levels of heavy metal accumulation in dental calculus of smokers: a pilot inductively coupled plasma mass spectrometry study.

Science.gov (United States)

Yaprak, E; Yolcubal, I; Sinanoğlu, A; Doğrul-Demiray, A; Guzeldemir-Akcakanat, E; Marakoğlu, I

2017-02-01

Various trace elements, including toxic heavy metals, may exist in dental calculus. However, the effect of environmental factors on heavy metal composition of dental calculus is unknown. Smoking is a major environmental source for chronic toxic heavy metal exposition. The aim of this study is to compare toxic heavy metal accumulation levels in supragingival dental calculus of smokers and non-smokers. A total of 29 supragingival dental calculus samples were obtained from non-smoker (n = 14) and smoker (n = 15) individuals. Subjects with a probability of occupational exposure were excluded from the study. Samples were analyzed by inductively coupled plasma mass spectrometry in terms of 26 metals and metalloids, including toxic heavy metals. Toxic heavy metals, arsenic (p 0.05). Within the limitations of this study, it can be concluded that the elementary composition of dental calculus may be affected by environmental factors such as tobacco smoke. Therefore, dental calculus may be utilized as a non-invasive diagnostic biological material for monitoring chronic oral heavy metal exposition. However, further studies are required to evaluate its diagnostic potential. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Review of heavy metal accumulation on aquatic environment in Northern East Mediterrenean Sea part I: some essential metals.

Science.gov (United States)

Yılmaz, Ayşe Bahar; Yanar, Alper; Alkan, Ela Nur

2017-03-01

All pollutants can reach the aquatic environments and the levels of heavy metals in upper members of the food web like fish can reach values many times higher than those found in aquatic environment or in sediments. Although heavy metals are essential or non-essential, all heavy metals are potentially harmful to humans and most organisms at some level of exposure and absorption. Marine organisms are good indicators for long-term monitoring of metal accumulation. The present review study is for evaluation of the data from previous studies about the toxic effects of selected heavy metals, like essential metals (copper, zinc, iron, chromium, and manganese), on seawater, sediment, and in different tissues of aquatic animals (demersal and bentic fish, invertabres) collected from different areas in Northern East Mediterrenean Sea since the 1990s. Some concern arose from previous studies, particularly in terms of safety for human consumption. For this purpose, 86 articles and 4 theses were examined and information was collected on the table to open a forward-looking view of the pollution of studied area. In previous studies, the variations in feeding habits, habitats, and the level of copper found in edible muscles of the demersal fish species (deep water fish species, carnivore) such as Mullus barbatus barbatus, Solea lascaris, Sparus aurata were always higher than those found in pelagic (omnivore) Mugil cephalus, Liza aurata. Results show discrepancies caused by many factors; thus, more work must be done carefully.

Assessment of Heavy Metals Level of River Kaduna at Kaduna ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management ... status and the implications of the heavy metal pollution on human health and the environment. ... metals discharged into the river especially from the industries and municipal ...

Sediment baseline study of levels and sources of polycyclic aromatic hydrocarbons and heavy metals in Lake Nicaragua

DEFF Research Database (Denmark)

Scheibye, Katrine; Weisser, Johan Juhl; Borggaard, Ole K.

2014-01-01

Selected metals and polycyclic aromatic hydrocarbons (PAHs) were analyzed in sediment samples from 24 sites in Lake Nicaragua sampled May 2010 to provide a baseline of pollution levels. Cu exceeded the Consensus-Based Sediment Quality Guideline (CBSQG) Threshold Effect Concentrations (TECs) at 21...... showed that the CBSQG TECs were exceeded by naphthalene at five sites. The sum concentrations of the 16 US EPA priority PAHs (∑PAH16) ranged from 0.01mgkg(-1)dw to 0.64mgkg(-1)dw. The highest ∑PAH16 concentration was found upstream in River Mayales and the PAH composition revealed a heavy PAH fraction (e....... This study concluded that areas of Lake Nicaragua represent an important pollution baseline for future studies in this lake and other tropical lakes....

Measurement of highly enriched uranium metal buttons with the high-level neutron coincidence counter operating in the active mode

International Nuclear Information System (INIS)

Foley, J.E.

1980-10-01

The portable High-Level Neutron Coincidence Counter is used in the active mode with the addition of AmLi neutron sources to assay the 235 U content of highly enriched metal pieces or buttons. It is concluded that the portable instrument is a practical instrument for assaying uranium metal buttons with masses in the range 1.5 to 4 kg

Heavy metal levels, physicochemical properties and microbial ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management ... out to assess the microbial, physicochemical and heavy metal characteristics of soil samples from five different waste collection sites within the University of Benin, Benin City and evaluated using standard analytical and classical microbiological methods.

Effects of heavy-metal-contaminated soil on growth, phenology and biomass turnover of Hieracium piloselloides

International Nuclear Information System (INIS)

Ryser, Peter; Sauder, Wendy R.

2006-01-01

The effects of low levels of heavy metals on plant growth, biomass turnover and reproduction were investigated for Hieracium pilosella. Plants were grown for 12 weeks on substrates with different concentrations of heavy metals obtained by diluting contaminated soils with silica sand. To minimize effects of other soil factors, the substrates were limed, fertilized, and well watered. The more metal-contaminated soil the substrate contained, the lower the leaf production rate and the plant mass were, and the more the phenological development was delayed. Flowering phenology was very sensitive to metals. Leaf life span was reduced at the highest and the lowest metal levels, the latter being a result of advanced seed ripening. Even if the effect of low metal levels on plant growth may be small, the delayed and reduced reproduction may have large effects at population, community and ecosystem level, and contribute to rapid evolution of metal tolerance. - Flowering phenology shows a very sensitive response to heavy metal contamination of soils

Characteristics of a Sensitive Well Showing Pre-Earthquake Water-Level Changes

Science.gov (United States)

King, Chi-Yu

2018-04-01

Water-level data recorded at a sensitive well next to a fault in central Japan between 1989 and 1998 showed many coseismic water-level drops and a large (60 cm) and long (6-month) pre-earthquake drop before a rare local earthquake of magnitude 5.8 on 17 March 1997, as well as 5 smaller pre-earthquake drops during a 7-year period prior to this earthquake. The pre-earthquake changes were previously attributed to leakage through the fault-gouge zone caused by small but broad-scaled crustal-stress increments. These increments now seem to be induced by some large slow-slip events. The coseismic changes are attributed to seismic shaking-induced fissures in the adjacent aquitards, in addition to leakage through the fault. The well's high-sensitivity is attributed to its tapping a highly permeable aquifer, which is connected to the fractured side of the fault, and its near-critical condition for leakage, especially during the 7 years before the magnitude 5.8 earthquake.

The electronic structure and metal-insulator transitions in vanadium oxides

International Nuclear Information System (INIS)

Mossanek, Rodrigo Jose Ochekoski

2010-01-01

The electronic structure and metal-insulator transitions in vanadium oxides (SrVO_3, CaVO_3, LaVO_3 and YVO_3) are studied here. The purpose is to show a new interpretation to the spectra which is coherent with the changes across the metal-insulator transition. The main experimental techniques are the X-ray photoemission (PES) and X-ray absorption (XAS) spectroscopies. The spectra are interpreted with cluster model, band structure and atomic multiplet calculations. The presence of charge-transfer satellites in the core-level PES spectra showed that these vanadium oxides cannot be classified in the Mott-Hubbard regime. Further, the valence band and core-level spectra presented a similar behavior across the metal insulator transition. In fact, the structures in the spectra and their changes are determined by the different screening channels present in the metallic or insulating phases. The calculated spectral weight showed that the coherent fluctuations dominate the spectra at the Fermi level and give the metallic character to the SrVO_3 and CaVO_3 compounds. The vanishing of this charge fluctuation and the replacement by the Mott-Hubbard screening in the LaVO_3 and YVO_3 systems is ultimately responsible for the opening of a band gap and the insulating character. Further, the correlation effects are, indeed, important to the occupied electronic structure (coherent and incoherent peaks). On the other hand, the unoccupied electronic structure is dominated by exchange and crystal field effects (t2g and eg sub-bands of majority and minority spins). The optical conductivity spectrum was obtained by convoluting the removal and addition states. It showed that the oxygen states, as well as the crystal field and exchange effects are necessary to correctly compare and interpret the experimental results. Further, a correlation at the charge-transfer region of the core-level and valence band optical spectra was observed, which could be extended to other transition metal oxides

Heavy metal levels in kiwifruit orchard soils and trees and its potential health risk assessment in Shaanxi, China.

Science.gov (United States)

Guo, Jing; Yue, Tianli; Li, Xiaotong; Yuan, Yahong

2016-07-01

Concentrations of five heavy metals (Cr, Cu, Cd, Hg, and Pb) in orchard soils and kiwifruit tissues (root, twig, leave, fruit) collected from Shaanxi province in China were measured, and the potential health risk for human through the fruit consumption was assessed. The orchard soils were in no pollution for Cr, Cu, Hg, and Pb, with their pollution index (PI) ≤1, while 10.0 % of the soil samples were under Cd contamination. Furthermore, kiwifruit tended to have a higher Cd and Hg accumulation (as indicated by Biological Accumulation Coefficient) from soil and have a higher Cu and Hg translocation (as reflected by Biological Transfer Coefficient) to aboveground parts. From the human health point of view, the DIM and HRI values for all the fruit samples were within the safe limits, while for Cr, Cu, Cd, Hg, and Pb, about 22.5, 12.5, 52.5, 15.0, and 47.5 % of the fruit samples exceeded the national maximum permissible levels, respectively. These results showed that, although there was no possible health risk to consumers due to intake of studied kiwifruit fruits under the current consumption rate, the regular survey of heavy metal pollution levels should be performed for the kiwifruit in Shaanxi province and a strict management program should be established to reduce the amount of chemical fertilizers and pesticides used in fruit production in order to prevent the potential health risk.

Reduced work function of graphene by metal adatoms

Energy Technology Data Exchange (ETDEWEB)

Legesse, Merid; Mellouhi, Fedwa El; Bentria, El Tayeb; Madjet, Mohamed E. [Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Doha (Qatar); Fisher, Timothy S. [School of Mechanical Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907 (United States); Kais, Sabre [Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Doha (Qatar); Department of Chemistry and Physics, Purdue University, West Lafayette, IN 46323 (United States); College of Science and Engineering, Hamad Bin Khalifa University, Doha (Qatar); Alharbi, Fahhad H., E-mail: falharbi@qf.org.qa [Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Doha (Qatar); College of Science and Engineering, Hamad Bin Khalifa University, Doha (Qatar)

2017-02-01

Highlights: • Using DFT, the maximum reduction of graphene workfunction is investigated. This is important for many applications. • The calculations show that the adatoms prefer to relax at hollow sites. • The transfer of electrons from the adatoms to graphene shifts up the Fermi level. So, graphene becomes metallic. • For those dopants that have been used experimentally, the calculations agree with the experimental data. • We found that 8% doping by Cs reduces the work function to 2.05 eV. - Abstract: In this paper, the work function of graphene doped by different metal adatoms and at different concentrations is investigated. Density functional theory is used to maximize the reduction of the work function. In general, the work function drops significantly before reaching saturation. For example in the case of Cs doping, the work function saturates at 2.05 eV with a modest 8% doping. The adsorption of different concentrations on metal adatoms on graphene is also studied. Our calculations show that the adatoms prefer to relax at hollow sites. The transfer of electron from metallic dopants to the graphene for all the studied systems shifts the Fermi energy levels above the Dirac-point and the doped graphenes become metallic. The value of Fermi energy shifts depends on the type of metallic dopants and its concentrations. A detail analysis of the electronic structure in terms of band structure and density of states, absorption energy, and charge transfer for each adatom-graphene system is presented.

Reduced work function of graphene by metal adatoms

International Nuclear Information System (INIS)

Legesse, Merid; Mellouhi, Fedwa El; Bentria, El Tayeb; Madjet, Mohamed E.; Fisher, Timothy S.; Kais, Sabre; Alharbi, Fahhad H.

2017-01-01

Highlights: • Using DFT, the maximum reduction of graphene workfunction is investigated. This is important for many applications. • The calculations show that the adatoms prefer to relax at hollow sites. • The transfer of electrons from the adatoms to graphene shifts up the Fermi level. So, graphene becomes metallic. • For those dopants that have been used experimentally, the calculations agree with the experimental data. • We found that 8% doping by Cs reduces the work function to 2.05 eV. - Abstract: In this paper, the work function of graphene doped by different metal adatoms and at different concentrations is investigated. Density functional theory is used to maximize the reduction of the work function. In general, the work function drops significantly before reaching saturation. For example in the case of Cs doping, the work function saturates at 2.05 eV with a modest 8% doping. The adsorption of different concentrations on metal adatoms on graphene is also studied. Our calculations show that the adatoms prefer to relax at hollow sites. The transfer of electron from metallic dopants to the graphene for all the studied systems shifts the Fermi energy levels above the Dirac-point and the doped graphenes become metallic. The value of Fermi energy shifts depends on the type of metallic dopants and its concentrations. A detail analysis of the electronic structure in terms of band structure and density of states, absorption energy, and charge transfer for each adatom-graphene system is presented.

Blood and urinary levels of metals and metalloids in the general adult population of Northern France: The IMEPOGE study, 2008-2010.

Science.gov (United States)

Nisse, Catherine; Tagne-Fotso, Romuald; Howsam, Mike; Richeval, Camille; Labat, Laurence; Leroyer, Ariane

2017-04-01

The assessment of human chemical risks related to occupational or environmental exposure to pollutants requires the use of both accurate exposure indicators and reference values. The objective of this study was to evaluate the blood and urinary levels of various metals and metalloids in a sample of adults aged 20-59 years of the general population of Northern France, a formerly heavily industrialised area that retains some industrial activity. A cross-sectional study was conducted between 2008 and 2010, enrolling 2000 residents of Northern France. The quota method was used to guarantee the representativeness of the participants on a sex, age, social category and smoking status basis, according to the census done by the French National Institute of Statistics and Economic Studies. The levels of 14 metals: aluminium (Al), antimony (Sb), total arsenic (As), beryllium (Be), cadmium (Cd), cobalt (Co), chromium (Cr), mercury (Hg), manganese (Mn), nickel (Ni), lead (Pb), thallium (Tl), vanadium (V) and zinc (Zn) were quantified by ICP-MS in urine and blood samples. A total of 982 men and 1018 women participated, allowing the analysis of 1992 blood and 1910 urine samples. Some metal(loid)s were detected in over 99% of the blood (Cd, Co, Mn, Ni, Pb) and urine (As, Co, Pb, Zn) samples and the remaining metals in 84-99% of the samples, with the exception of blood V (19%), blood Be (57%) and urine Be (58%). Mean blood levels of Pb and Zn were significantly higher in men, and Mn, Co and Cr in women. In urine, mean Pb, Tl and Sb concentrations were significantly higher in men, and Al and Co in women. Current smokers had significantly higher mean levels of blood Cd and Pb and lower blood Co, Mn and Hg. In urine (adjusted on urinary creatinine), the smokers had higher mean levels of Cd, Pb, V and Zn and lower mean levels of As, Co, and Hg. Overall, the mean urinary levels of most metal(loid)s found in the general population of Northern France were higher than those found in the

Household dust metal levels in The Sao Paulo metropolitan area

International Nuclear Information System (INIS)

Scapin, Valdirene O.; Scapin, Marcos A.; Sato, Ivone M.

2007-01-01

A study about household dust is being conducted to determine the level of metal contamination in the Sao Paulo Metropolitan Area (SPMA). The SPMA, with 18 million inhabitants, is one of the largest urban areas of the world, with serious environmental problems, due to the great amount of industries, heavy traffic and the disordered growth of population. The pollutants originate from a multiplicity of indoor and outdoor sources. Indoor sources are originated from residual (hair, skin scales), pets, human activities, construction materials, and furnishings as well as biological material (pollen, insect parts).and outdoor pollution, usually from the urban traffic. The pollutant mixture involved in numerous physical and chemical processes and changes its characteristics with time. Its composition and concentration depend on the strengths of indoor sources, the concentration of pollutants outside and the properties of ventilation and air-conditioning systems. It is well recognized that many metals have chronic effects on humans, in particular toddlers, who are at an higher risk compared to adults because they engage in greater hand to-mouth activity and their neurological systems are still developing. The household dust samples were collected from different localities, using vacuum cleaner, and sieved up to particle size -1 ; Mn, 119-369 μg g -1 ; Fe, 372-1464 μg g -1 ; Ni, 33-85 μg g -1 ; Cu, 42-303 μg g -1 ; Zn, 156-1369 μg g -1 and Pb, 26-160 μg g -1 . (author)

Heavy metal jako subkultura

OpenAIRE

KOUTNÁ, Daniela

2016-01-01

This bachelor thesis deals with heavy metal subculture. Its aim is to introduce the most important branches and to show broadness of heavy metal. This bachelor thesis describes development and history, briefly shows Czech heavy metal history alongside with the biggest and most popular Czech heavy metal festivals. It shows the most dressing concerns of society against this style.

Hydroponics reducing effluent's heavy metals discharge.

Science.gov (United States)

Rababah, Abdellah; Al-Shuha, Ahmad

2009-01-01

This paper investigates the capacity of Nutrient Film Technique (NFT) to control effluent's heavy metals discharge. A commercial hydroponic system was adapted to irrigate lettuces with primary treated wastewater for studying the potential heavy metals removal. A second commercial hydroponic system was used to irrigate the same type of lettuces with nutrient solution and this system was used as a control. Results showed that lettuces grew well when irrigated with primary treated effluent in the commercial hydroponic system. The NFT-plant system heavy metals removal efficiency varied amongst the different elements, The system's removal efficiency for Cr was more than 92%, Ni more than 85%, in addition to more than 60% reduction of B, Pb, and Zn. Nonetheless, the NFT-plants system removal efficiencies for As, Cd and Cu were lower than 30%. Results show that lettuces accumulated heavy metals in leaves at concentrations higher than the maximum acceptable European and Australian levels. Therefore, non-edible plants such as flowers or pyrethrum are recommended as value added crops for the proposed NFT.

Leachability of heavy metals from scrap dirt sampled at two scrap iron and metal recycling facilities

DEFF Research Database (Denmark)

Jensen, Dorthe Lærke; Holm, Peter Engelund; Christensen, Thomas Højlund

2000-01-01

Column and batch leaching experiments were performed to quantify leaching of heavy metals (Pb, Cu, Cd and Zn) from scrap dirt representing different activities at two iron scrap and metal recycling facilities. The scrap dirt is often found directly upon the bare unprotected soil at recycling...... battery salvage locations was different, showing lower pH and signi®cant leaching of lead (up to 8000 mg Pb l±1), cadmium (up to 40 mg Cd l±1), and zinc (up to 2000 mg Zn l±1). The column and batch leaching experiments gave comparable results at the order of magnitude level, and both approaches are......, at that level, useful for evaluation of leaching potentials from scrap dirt. The experiments showed that scrap dirt at recycling facilities constitutes only a modest leaching problem, but a long-term soil pollution problem from a land-use perspective. Leaching experiments with compost solution indicated...

Source of atmospheric heavy metals in winter in Foshan, China.

Science.gov (United States)

Tan, Ji-Hua; Duan, Jing-Chun; Ma, Yong-Liang; Yang, Fu-Mo; Cheng, Yuan; He, Ke-Bin; Yu, Yong-Chang; Wang, Jie-Wen

2014-09-15

Foshan is a ceramics manufacturing center in the world and the most polluted city in the Pearl River Delta (PRD) in southern China measured by the levels of atmospheric heavy metals. PM2.5 samples were collected in Foshan in winter 2008. Among the 22 elements and ions analyzed, 7 heavy metals (Zn, V, Mn, Cu, As, Cd and Pb) were studied in depth for their levels, spatiotemporal variations and sources. The ambient concentrations of the heavy metals were much higher than the reported average concentrations in China. The levels of Pb (675.7 ± 378.5 ng/m(3)), As (76.6 ± 49.1 ng/m(3)) and Cd (42.6 ± 45.2 ng/m(3)) exceeded the reference values of NAAQS (GB3095-2012) and the health guidelines of the World Health Organization. Generally, the levels of atmospheric heavy metals showed spatial distribution as: downtown site (CC, Chancheng District)>urban sites (NH and SD, Nanhai and Shunde Districts)>rural site (SS, Shanshui District). Two sources of heavy metals, the ceramic and aluminum industries, were identified during the sampling period. The large number of ceramic manufactures was responsible for the high levels of atmospheric Zn, Pb and As in Chancheng District. Transport from an aluminum industry park under light north-west winds contributed high levels of Cd to the SS site (Shanshui District). The average concentration of Cd under north-west wind was 220 ng/m(3), 20.5 times higher than those under other wind directions. The high daily maximum enrichment factors (EFs) of Cd, Pb, Zn, As and Cu at all four sites indicated extremely high contamination by local emissions. Back trajectory analysis showed that the heavy metals were also closely associated with the pathway of air mass. A positive matrix factorization (PMF) method was applied to determine the source apportionment of these heavy metals. Five factors (industry including the ceramic industry and coal combustion, vehicle emissions, dust, transportation and sea salt) were identified and industry was the most

X-ray microanalysis of chromatin-bound period 4 metals in Glenodinium foliaceum: A binucleate dinoflagellate

International Nuclear Information System (INIS)

Sigee, D.C.; Kearns, L.P.

1981-01-01

Each vegetative cell of the dinoflagellate Glenodinium foliaceum possesses two distinct types of nucleus, both of which have high levels of chromatinbound Period 4 (Periodic Table) metal elements. The typical dinoflagellate (dinocaryotic) nucleus has chromatin which differs from the atypical (supernumerary) nucleus in its high degree of condensation and in the related high levels of P, Ca, and Transition metals Fe, Ni, Cu, and Zn. The complete absence of detectable Fe and Ni in the supernumerary chromatin represents a major difference which may relate to differences in phyllogenetic origin of the two nuclei. The two types of chromatin show close similarities a the molecular level, including the possession of 40 atoms of Period 4 elements per 100 atoms of P-of which approximately half are Ca atoms, and half Transition metals. In both cases, the levels of Ca and Zn show a high correlation with the level of P, suggesting a direct association of these particular metal atoms with nucleic acid phosphate groups. The close similarity in metal binding at the molecular level suggests that the association of Period 4 elements with the two types of chromatin is unrelated to any differences in chromatin proteins-such as the presence or absence of histones. (author)

levels of heavy metals in gubi dam water bauchi, nigeria

African Journals Online (AJOL)

Ada

copper and lead were always highest in the suspended materials which indicate the dominant role played by ... essential. However, at high concentrations, these trace metals become toxic (Nurnberg, 1982). Heavy metals in .... mobilization of cobalt minerals into the dam. .... Interaction between sediments and fresh water ...

Carbon and nitrogen stable isotopes and metal concentration in food webs from a mining-impacted coastal lagoon

International Nuclear Information System (INIS)

Marin-Guirao, Lazaro; Lloret, Javier; Marin, Arnaldo

2008-01-01

Two food webs from the Mar Menor coastal lagoon, differing in the distance from the desert-stream through which mining wastes were discharged, were examined by reference to essential (Zn and Cu) and non-essential (Pb and Cd) metal concentrations and stable isotopes content (C and N). The partial extraction technique applied, which reflects the availability of metals to organisms after sediment ingestion, showed higher bioavailable metal concentrations in sediments from the station influenced by the mining discharges, in agreement with the higher metal concentrations observed in organisms, which in many cases exceeded the regulatory limits established in Spanish legislation concerning seafood. Spatial differences in essential metal concentrations in the fauna suggest that several organisms are exposed to metal levels above their regulation capacity. Differences in isotopic composition were found between both food webs, the wadi-influenced station showing higher δ 15 N values and lower δ 13 C levels, due to the discharge of urban waste waters and by the entrance of freshwater and allochthonous marsh plants. The linear-regressions between trophic levels (as indicated by δ 15 N) and the metal content indicated that biomagnification does not occur. In the case of invertebrates, since the 'handle strategy' of the species and the physiological requirements of the organisms, among other factors, determine the final concentration of a specific element, no clear relationships between trophic level and the metal content are to be expected. For their part, fish communities did not show clear patterns in the case of any of the analyzed metals, probably because most fish species have similar metal requirements, and because biological factors also intervened. Finally, since the study deals with metals, assumptions concerning trophic transfer factors calculation may not be suitable since the metal burden originates not only from the prey but also from adsorption over the body

Carbon and nitrogen stable isotopes and metal concentration in food webs from a mining-impacted coastal lagoon

Energy Technology Data Exchange (ETDEWEB)

Marin-Guirao, Lazaro [Departamento de Ecologia e Hidrologia, Facultad de Biologia, Universidad de Murcia, 30100-Murcia (Spain)], E-mail: lamarin@um.es; Lloret, Javier; Marin, Arnaldo [Departamento de Ecologia e Hidrologia, Facultad de Biologia, Universidad de Murcia, 30100-Murcia (Spain)

2008-04-01

Two food webs from the Mar Menor coastal lagoon, differing in the distance from the desert-stream through which mining wastes were discharged, were examined by reference to essential (Zn and Cu) and non-essential (Pb and Cd) metal concentrations and stable isotopes content (C and N). The partial extraction technique applied, which reflects the availability of metals to organisms after sediment ingestion, showed higher bioavailable metal concentrations in sediments from the station influenced by the mining discharges, in agreement with the higher metal concentrations observed in organisms, which in many cases exceeded the regulatory limits established in Spanish legislation concerning seafood. Spatial differences in essential metal concentrations in the fauna suggest that several organisms are exposed to metal levels above their regulation capacity. Differences in isotopic composition were found between both food webs, the wadi-influenced station showing higher {delta}{sup 15}N values and lower {delta}{sup 13}C levels, due to the discharge of urban waste waters and by the entrance of freshwater and allochthonous marsh plants. The linear-regressions between trophic levels (as indicated by {delta}{sup 15}N) and the metal content indicated that biomagnification does not occur. In the case of invertebrates, since the 'handle strategy' of the species and the physiological requirements of the organisms, among other factors, determine the final concentration of a specific element, no clear relationships between trophic level and the metal content are to be expected. For their part, fish communities did not show clear patterns in the case of any of the analyzed metals, probably because most fish species have similar metal requirements, and because biological factors also intervened. Finally, since the study deals with metals, assumptions concerning trophic transfer factors calculation may not be suitable since the metal burden originates not only from the prey but

[The umbilical blood levels of lead and some other toxic metals as a biomarker of environment-induced exposure].

Science.gov (United States)

Privalova, L I; Malykh, O L; Matiukhina, G V; Gnezdilova, S V

2007-01-01

Groups of pregnant women, which made up in Revda, Pervouralsk, Krasnouralsk, and Verkh-Isetsky District of Yekaterinburg, were studied. Tests of umbilical blood samples (UB) for the levels of calcium, iron, chromium, manganese, zinc, nickel, cadmium, lead, arsenic, copper, and mercury have established that the mean concentration of lead and the proportion of samples with elevated UB lead concentrations depend on how close the residential area is located to the major industrial source of emission of this toxic metal into ambient air. This correlation is less marked for other metals or it is not found. The particular position of lead is likely to be explained by the fact that it is entirely foreign to an organism and by the comparative unimportance of a contribution of the sources of exposure to this metal, which are unassociated with man-caused environmental and food pollution. As far as other metals are concerned, the situation is complicated by the fact that they are not only toxic, but when upon minor exposures, also essential biotrace elements with controlled and interdependent toxic kinetics. It is also shown that when a pregnant woman takes a complex of biological protectors promoting a reduction in her body's levels of lead, its concentrations in her body, its UB concentration is much lower than such a bioprophylactic effect is absent.

Roadside soils show low plant available zinc and copper concentrations

International Nuclear Information System (INIS)

Morse, Natalie; Walter, M. Todd; Osmond, Deanna; Hunt, William

2016-01-01

Vehicle combustion and component wear are a major source of metal contamination in the environment, which could be especially concerning where road ditches are actively farmed. The objective of this study was to assess how site variables, namely age, traffic (vehicles day"−"1), and percent carbon (%C) affect metal accumulation in roadside soils. A soil chronosequence was established with sites ranging from 3 to 37 years old and bioavailable, or mobile, concentrations of Zinc (Zn) and Copper (Cu) were measured along major highways in North Carolina using a Mehlich III extraction. Mobile Zn and Cu concentrations were low overall, and when results were scaled via literature values to “total metal”, the results were still generally lower than previous roadside studies. This could indicate farming on lands near roads would pose a low plant toxicity risk. Zinc and Cu were not correlated with annual average traffic count, but were positively correlated with lifetime traffic load (the product of site age and traffic count). This study shows an often overlooked variable, site age, should be included when considering roadside pollution accumulation. Zinc and Cu were more strongly associated with %C, than traffic load. Because vehicle combustion is also a carbon source, it is not obvious whether the metals and carbon are simply co-accumulating or whether the soil carbon in roadside soils may facilitate previously overlooked roles in sequestering metals on-site. - Highlights: • Low plant available zinc and copper concentrations in roadside soils of the southeast U.S. • Metals from vehicular traffic may not be adversely affecting plants in roadside environment. • Traffic volume and site age better predictor of metal pollution than traffic volume alone. - Mobile concentrations of Zn and Cu in roadside soils were below toxic levels. Zn and Cu concentrations were better correlated with lifetime vehicle load, as opposed to traffic volume.

Heavy metals burden in Kidney and heart tissues of Scarus ...

African Journals Online (AJOL)

Levels of selected heavy metals (Pb, Co, Cu, Ni, Zn, Mn and Cd) in the heart and kidney tissues of parrot fish, collected from the Arabian Gulf, Eastern Province of Saudi Arabia, were determined by wet-digestion based atomic absorption method. The results showed that accumulation pattern of analyzed metals in the kidney ...

Level of heavy metals in some edible and poisonous macrofungi from Batman of South East Anatolia, Turkey.

Science.gov (United States)

Yesil, Omer Faruk; Yildiz, Abdunnasir; Yavuz, Omer

2004-07-01

The macrofungi specimens were collected and identified from locations around Batman province of Turkey. A group of 21 macrofungi were collected from 29 different locations and analysed for the heavy metal contents. The highest Pb and Cu levels were found in Russula rubroalba while the highest Cd level was determined for the species Agaricus xanthodermus. Fe level was maximum for the species Funalia trogii; Mn for Mycena personsii; Zn level was for Morchella esculenta and Co level was for the species Agaricus xanthodermus. The lowest Cd, Cu, Mn and Zn contents were found in Inotus hispidus.

Sub-chronic toxicological studies of transition metal complexes of ...

African Journals Online (AJOL)

However, Naproxen metal complexes showed comparatively lower side effects than naproxen. Hematological report suggested that naproxen was in process of initiating inflammation which was justified by decreasing the mean value hemoglobin and hematocrit level and increasing the white blood cells level. There were ...

Assessment of the toxicity level of an industrial eco-system for its hazardous metals

International Nuclear Information System (INIS)

Husaini, S.N.; Matiullah; Arif, M.

2011-01-01

Pakistan is an agricultural country, yet it is facing a serious threat due to the shortage of water resources and degradation of the agricultural land by the pollution of industrial effluents. A limited number of the current industries are equipped with proper operating treatment plants. Generally, the untreated effluents are disposed off to the open environment which is used for irrigation purposes. Therefore, vegetables and crops grown around the industrial areas is a major potential source of metal poisoning which pose a serious risk to the general public. Hence, study of the toxicity level in vegetables and crops is highly desirable. In this regard, systematic studies have been carried out to determine concentration levels of toxic elements in the samples of vegetables, crops, effluents and soil collected from the industrial areas of the Faisalabad. After processing, these samples were analyzed using neutron activation analysis and atomic absorption spectrometric techniques. The highest concentrations of toxic metals were observed for As (2.73 ± 0.34) in cabbage, Cd (1.5 ± 0.1), Ni (5.1 ± 0.9) and Pb (4.3 ± 0.2) in corn, Co (0.65 ± 0.02), and Sb (0.09 ± 0.01) in carrot, Cr (9.63 ± 1.3), Mn (46.5 ± 4.2) and Se (1.03 ± 0.1) in millet, Cu (11.3 ± 1.1) in tomato vegetables and crop samples. Although, the observed toxicity levels in vegetables and crop samples were higher than those grown in non-industrial areas, yet these toxicity levels are within the safe recommended limits. (author)

The relationships between heavy metal (Cd, Cr, Cu, Fe, Pb, Zn) levels and the size of six Mediterranean fish species

International Nuclear Information System (INIS)

Canli, Mustafa; Atli, Gueluezar

2003-01-01

Significant relationships between metal concentrations and fish size were negative. - Heavy metal (Cd, Cr, Cu, Fe, Pb, Zn) concentrations in the muscle, gill and liver of six fish species (Sparus auratus, Atherina hepsetus, Mugil cephalus, Trigla cuculus, Sardina pilchardus and Scomberesox saurus) from the northeast Mediterranean Sea were measured and the relationships between fish size (length and weight) and metal concentrations in the tissues were investigated by linear regression analysis. Metal concentrations (as μg/g d.w.) were highest in the liver, except for iron in the gill of Scomberesox saurus and lowest in the muscle of all the fish species. Highest concentrations of Cd (4.50), Cr (17.1) and Pb (41.2) were measured in liver tissues of T. cuculus, Sardina pilchardus and A. hepsetus, respectively. The liver of M. cephalus showed strikingly high Cu concentrations (202.8). The gill of Scomberesox saurus was the only tissue that showed highest (885.5) iron concentrations. Results of linear regression analysis showed that, except in a few cases, significant relationships between metal concentrations and fish size were negative. Highly significant (P<0.001) negative relationships were found between fish length and Cr concentrations in the liver of A. hepsetus and M. cephalus, and Cr concentrations in the gill of T. cuculus. Cr and Pb concentrations in the liver and Cu concentrations in all the tissues of Scomberesox saurus also showed very significant (P<0.001) negative relationships. Negative relationships found here were discussed

Metal detector technology data base

Energy Technology Data Exchange (ETDEWEB)

Porter, L.K.; Gallo, L.R.; Murray, D.W.

1990-08-01

The tests described in this report were conducted to obtain information on the effects target characteristics have on portal type metal detector response. A second purpose of the tests was to determine the effect of detector type and settings on the detection of the targets. Although in some cases comparison performance of different types and makes of metal detectors is found herein, that is not the primary purpose of the report. Further, because of the many variables that affect metal detector performance, the information presented can be used only in a general way. The results of these tests can show general trends in metal detection, but do little for making accurate predictions as to metal detector response to a target with a complex shape such as a handgun. The shape of an object and its specific metal content (both type and treatment) can have a significant influence on detection. Thus it should not be surprising that levels of detection for a small 100g stainless steel handgun are considerably different than for detection of the 100g stainless steel right circular cylinder that was used in these tests. 7 figs., 1 tab.

Adsorption preference for divalent metal ions by Lactobacillus casei JCM1134.

Science.gov (United States)

Endo, Rin; Aoyagi, Hideki

2018-05-09

The removal of harmful metals from the intestinal environment can be inhibited by various ions which can interfere with the adsorption of target metal ions. Therefore, it is important to understand the ion selectivity and adsorption mechanism of the adsorbent. In this study, we estimated the adsorption properties of Lactobacillus casei JCM1134 by analyzing the correlation between its maximum adsorption level (q max ) for seven metals and their ion characteristics. Some metal ions showed altered adsorption levels by L. casei JCM1134 as culture growth time increased. Although it was impossible to identify specific adsorption components, adsorption of Sr and Ba may depend on capsular polysaccharide levels. The maximum adsorption of L. casei JCM1134 (9 h of growth in culture) for divalent metal ions was in the following order: Cu 2+  > Ba 2+  > Sr 2+  > Cd 2+  > Co 2+  > Mg 2+  > Ni 2+ . The q max showed a high positive correlation with the ionic radius. Because this tendency is similar to adsorption occurring through an ion exchange mechanism, it was inferred that an ion exchange mechanism contributed greatly to adsorption by L. casei JCM1134. Because the decrease in the amount of adsorption due to prolonged culture time was remarkable for metals with a large ion radius, it is likely that the adsorption components involved in the ion exchange mechanism decomposed over time. These results and analytical concept may be helpful for designing means to remove harmful metals from the intestinal tract.

Heavy metal levels in soil samples from highly industrialized Lagos ...

African Journals Online (AJOL)

Anyakora

2013-09-05

Sep 5, 2013 ... The effect of heavy metals on the environment is of serious concern and threatens life in all forms. Environmental ... have affected the quality of soil due to contamination of soil with heavy metals and the consequent effects on the ..... tested for remediation of chromium-contaminated soils. (Collen, 2003).

Determination of Levels of Essential and Toxic Heavy Metals in ...

African Journals Online (AJOL)

The concentrations of trace essential metals (Co, Cu, Fe, Mn, Ni and Zn) and toxic heavy metals (Cd and Pb) in lentil samples collected from Dejen (East Gojjam), Boset (East Shewa) and Molale (North Shewa), Ethiopia, were determined by flame atomic absorption spectrometry. A wet digestion procedure, using mixtures of ...

Experiments of a 100 kV-level pulse generator based on metal-oxide varistor

Science.gov (United States)

Cui, Yan-cheng; Wu, Qi-lin; Yang, Han-wu; Gao, Jing-ming; Li, Song; Shi, Cheng-yu

2018-03-01

This paper introduces the development and experiments of a 100 kV-level pulse generator based on a metal-oxide varistor (MOV). MOV has a high energy handling capacity and nonlinear voltage-current (V-I) characteristics, which makes it useful for high voltage pulse shaping. Circuit simulations based on the measured voltage-current characteristics of MOV verified the shaping concept and showed that a circuit containing a two-section pulse forming network (PFN) will result in better defined square pulse than a simple L-C discharging circuit. A reduced-scale experiment was carried out and the result agreed well with simulation prediction. Then a 100 kV-level pulse generator with multiple MOVs in a stack and a two-section pulse forming network (PFN) was experimented. A pulse with a voltage amplitude of 90 kV, rise time of about 50 ns, pulse width of 500 ns, and flat top of about 400 ns was obtained with a water dummy load of 50 Ω. The results reveal that the combination of PFN and MOV is a practical way to generate high voltage pulses with better flat top waveforms, and the load voltage is stable even if the load's impedance varies. Such pulse generator can be applied in many fields such as surface treatment, corona plasma generation, industrial dedusting, and medical disinfection.

Determination of Carrier Polarity in Fowler-Nordheim Tunneling and Evidence of Fermi Level Pinning at the Hexagonal Boron Nitride/Metal Interface.

Science.gov (United States)

Hattori, Yoshiaki; Taniguchi, Takashi; Watanabe, Kenji; Nagashio, Kosuke

2018-04-11

Hexagonal boron nitride (h-BN) is an important insulating substrate for two-dimensional (2D) heterostructure devices and possesses high dielectric strength comparable to SiO 2 . Here, we report two clear differences in their physical properties. The first one is the occurrence of Fermi level pinning at the metal/h-BN interface, unlike that at the metal/SiO 2 interface. The second one is that the carrier of Fowler-Nordheim (F-N) tunneling through h-BN is a hole, which is opposite to an electron in the case of SiO 2 . These unique characteristics are verified by I- V measurements in the graphene/h-BN/metal heterostructure device with the aid of a numerical simulation, where the barrier height of graphene can be modulated by a back gate voltage owing to its low density of states. Furthermore, from a systematic investigation using a variety of metals, it is confirmed that the hole F-N tunneling current is a general characteristic because the Fermi levels of metals are pinned in the small energy range around ∼3.5 eV from the top of the conduction band of h-BN, with a pinning factor of 0.30. The accurate energy band alignment at the h-BN/metal interface provides practical knowledge for 2D heterostructure devices.

Metal concentrations in Unio pictorum mancus (Mollusca, Lamellibranchia from of 12 Northern Italian lakes in relation to their trophic level

Directory of Open Access Journals (Sweden)

Paolo LODIGIANI

2003-08-01

Full Text Available This research aims to test the reliability of environmental monitoring by bioaccumulators of pollutants; that is to establish a positive relationship between the pollutant concentrations in the bioaccumulator and those in the water in which it lives. To this end we analysed the contents of Al, Cu, Zn, Fe, Mn and Ca in the soft tissues and shell of Unio pictorum mancus. The filtered water samples from the mussel habitat were analysed for the same metals. The mussels were collected from 15 stations settled in 12 Northern Italian lakes during the first two weeks of July 2001. These results were obtained: a metal concentrations varied widely with mussel size and among stations; b a significant positive correlation between the concentration of calcium in the water and in the mussel tissues, but no relationship emerged for the other metals; c no relationship between the metal concentrations in the tissues and those in the shell was found; d there was a certain tendency for Mn, Fe and Zn concentrations in the soft tissues to increase with shell size; e the sequence of the decreasing metal concentrations arranged for the tissues was similar to that of the shell, but rather different from that in the water; and f the concentration factor values of the trace metals were high for the shell and soft tissues. In highly productive lakes large size mussels dominated, whereas small mussels were more abundant in low productive lakes. Although the metal concentrations in the water of productive lakes were greater than in low productive ones, the metal concentrations in the tissues of the mussels from the latter were generally higher than those in the mussels from the former. We propose some hypotheses to explain this paradox. Finally, our results show that the metal concentrations in the mussels do not reflect the metal concentrations in the water in which they live. It follows that this commonly used but oversimplified monitoring system cannot be recommended. On

levels of essential and non-essential metals in ethiopian ouzo

African Journals Online (AJOL)

Preferred Customer

Key words/phrases: Alcoholic beverage, Ethiopia, essential metal, non-essential metal, ouzo. * Author to whom all correspondence should ... ing the attention of scientists and policy makers as a vital part of food security strategies and ... Canadian Government indicated that it had detected ethyl carbamate, C3H7NO2, which ...

Electric field mapping inside metallized film capacitors

DEFF Research Database (Denmark)

Nielsen, Dennis Achton; Popok, Vladimir; Pedersen, Kjeld

2015-01-01

(s) they suffered from accelerated testing. We have prepared film capacitors for analysis by micro-sectioning and verified the quality of the preparation procedure using optical and atomic force microscopy. The potential distribution in the layer structure (alternating 7 µm thick dielectric and 50-100 nm thick...... and durability and serves as verification that failure- and degradation mechanisms remain the same at different stress levels during accelerated testing. In this work we have used Kelvin probe force microscopy (KPFM) to analyze metallized film capacitors with the purpose of determining the degradation mechanism...... metal) of a new capacitor was used as reference. KPFM measurements on the degraded capacitors showed a change in contact potential difference from -0.61V on the reference capacitor to 3.2V on the degraded ones, indicating that corrosion of the metallization had happened. Studies also showed that some...

Plasmon tsunamis on metallic nanoclusters.

Science.gov (United States)

Lucas, A A; Sunjic, M

2012-03-14

A model is constructed to describe inelastic scattering events accompanying electron capture by a highly charged ion flying by a metallic nanosphere. The electronic energy liberated by an electron leaving the Fermi level of the metal and dropping into a deep Rydberg state of the ion is used to increase the ion kinetic energy and, simultaneously, to excite multiple surface plasmons around the positively charged hole left behind on the metal sphere. This tsunami-like phenomenon manifests itself as periodic oscillations in the kinetic energy gain spectrum of the ion. The theory developed here extends our previous treatment (Lucas et al 2011 New J. Phys. 13 013034) of the Ar(q+)/C(60) charge exchange system. We provide an analysis of how the individual multipolar surface plasmons of the metallic sphere contribute to the formation of the oscillatory gain spectrum. Gain spectra showing characteristic, tsunami-like oscillations are simulated for Ar(15+) ions capturing one electron in distant collisions with Al and Na nanoclusters.

Assessing for Cardiotoxicity from Metal-on-Metal Hip Implants with Advanced Multimodality Imaging Techniques.

Science.gov (United States)

Berber, Reshid; Abdel-Gadir, Amna; Rosmini, Stefania; Captur, Gabriella; Nordin, Sabrina; Culotta, Veronica; Palla, Luigi; Kellman, Peter; Lloyd, Guy W; Skinner, John A; Moon, James C; Manisty, Charlotte; Hart, Alister J

2017-11-01

High failure rates of metal-on-metal (MoM) hip implants prompted regulatory authorities to issue worldwide safety alerts. Circulating cobalt from these implants causes rare but fatal autopsy-diagnosed cardiotoxicity. There is concern that milder cardiotoxicity may be common and underrecognized. Although blood metal ion levels are easily measured and can be used to track local toxicity, there are no noninvasive tests for organ deposition. We sought to detect correlation between blood metal ions and a comprehensive panel of established markers of early cardiotoxicity. Ninety patients were recruited into this prospective single-center blinded study. Patients were divided into 3 age and sex-matched groups according to implant type and whole-blood metal ion levels. Group-A patients had a ceramic-on-ceramic [CoC] bearing; Group B, an MoM bearing and low blood metal ion levels; and Group C, an MoM bearing and high blood metal-ion levels. All patients underwent detailed cardiovascular phenotyping using cardiac magnetic resonance imaging (CMR) with T2*, T1, and extracellular volume mapping; echocardiography; and cardiac blood biomarker sampling. T2* is a novel CMR biomarker of tissue metal loading. Blood cobalt levels differed significantly among groups A, B, and C (mean and standard deviation [SD], 0.17 ± 0.08, 2.47 ± 1.81, and 30.0 ± 29.1 ppb, respectively) and between group A and groups B and C combined. No significant between-group differences were found in the left atrial or ventricle size, ejection fraction (on CMR or echocardiography), T1 or T2* values, extracellular volume, B-type natriuretic peptide level, or troponin level, and all values were within normal ranges. There was no relationship between cobalt levels and ejection fraction (R = 0.022, 95% confidence interval [CI] = -0.185 to 0.229) or T2* values (R = 0.108, 95% CI = -0.105 to 0.312). Using the best available technologies, we did not find that high (but not extreme) blood cobalt and chromium levels

A metallic metal oxide (Ti5O9)-metal oxide (TiO2) nanocomposite as the heterojunction to enhance visible-light photocatalytic activity.

Science.gov (United States)

Li, L H; Deng, Z X; Xiao, J X; Yang, G W

2015-01-26

Coupling titanium dioxide (TiO2) with other semiconductors is a popular method to extend the optical response range of TiO2 and improve its photon quantum efficiency, as coupled semiconductors can increase the separation rate of photoinduced charge carriers in photocatalysts. Differing from normal semiconductors, metallic oxides have no energy gap separating occupied and unoccupied levels, but they can excite electrons between bands to create a high carrier mobility to facilitate kinetic charge separation. Here, we propose the first metallic metal oxide-metal oxide (Ti5O9-TiO2) nanocomposite as a heterojunction for enhancing the visible-light photocatalytic activity of TiO2 nanoparticles and we demonstrate that this hybridized TiO2-Ti5O9 nanostructure possesses an excellent visible-light photocatalytic performance in the process of photodegrading dyes. The TiO2-Ti5O9 nanocomposites are synthesized in one step using laser ablation in liquid under ambient conditions. The as-synthesized nanocomposites show strong visible-light absorption in the range of 300-800 nm and high visible-light photocatalytic activity in the oxidation of rhodamine B. They also exhibit excellent cycling stability in the photodegrading process. A working mechanism for the metallic metal oxide-metal oxide nanocomposite in the visible-light photocatalytic process is proposed based on first-principle calculations of Ti5O9. This study suggests that metallic metal oxides can be regarded as partners for metal oxide photocatalysts in the construction of heterojunctions to improve photocatalytic activity.

Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

Directory of Open Access Journals (Sweden)

Yang Guan

2014-07-01

Full Text Available Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1 Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2 The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3 The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4 The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies.

Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

Science.gov (United States)

Guan, Yang; Shao, Chaofeng; Ju, Meiting

2014-01-01

Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

Uptake of heavy metals by Typha capensis from wetland sites polluted by effluent from mineral processing plants: implications of metal-metal interactions.

Science.gov (United States)

Zaranyika, M F; Nyati, W

2017-10-01

The aim of the present work was to demonstrate the existence of metal-metal interactions in plants and their implications for the absorption of toxic elements like Cr. Typha capensis , a good accumulator of heavy metals, was chosen for the study. Levels of Fe, Cr, Ni, Cd, Pb, Cu and Zn were determined in the soil and roots, rhizomes, stems and leaves of T. capensis from three Sites A, B and C polluted by effluent from a chrome ore processing plant, a gold ore processing plant, and a nickel ore processing plant, respectively. The levels of Cr were extremely high at Site A at 5415 and 786-16,047 μg g -1 dry weight in the soil and the plant, respectively, while the levels of Ni were high at Site C at 176 and 24-891 μg g -1 in the soil and the plant, respectively. The levels of Fe were high at all three sites at 2502-7500 and 906-13,833 μg g -1 in the soil and plant, respectively. For the rest of the metals, levels were modest at 8.5-148 and 2-264 μg g -1 in the soil and plant, respectively. Pearson's correlation analysis confirmed mutual synergistic metal-metal interactions in the uptake of Zn, Cu, Co, Ni, Fe, and Cr, which are attributed to the similarity in the radii and coordination geometry of the cations of these elements. The implications of such metal-metal interactions (or effects of one metal on the behaviour of another) on the uptake of Cr, a toxic element, and possible Cr detoxification mechanism within the plant, are discussed.

Metal-phthalocyanine ordered layers on Au(110): Metal-dependent adsorption energy

Energy Technology Data Exchange (ETDEWEB)

Massimi, Lorenzo, E-mail: lorenzo.massimi@uniroma1.it; Angelucci, Marco; Gargiani, Pierluigi; Betti, Maria Grazia [Dipartimento di Fisica, Università di Roma La “Sapienza,” 00185 Roma (Italy); Montoro, Silvia [IFIS Litoral, CONICET-UNL, Laboratorio de Fisica de Superficies e Interfaces, Güemes 3450, Santa Fe (Argentina); Mariani, Carlo, E-mail: carlo.mariani@uniroma1.it [Dipartimento di Fisica, CNISM, Università di Roma La “Sapienza,” 00185 Roma (Italy)

2014-06-28

Iron-phthalocyanine and cobalt-phthalocyanine chains, assembled along the Au(110)-(1×2) reconstructed channels, present a strong interaction with the Au metallic states, via the central metal ion. X-ray photoemission spectroscopy from the metal-2p core-levels and valence band high-resolution ultraviolet photoelectron spectroscopy bring to light signatures of the interaction of the metal-phthalocyanine single-layer with gold. The charge transfer from Au to the molecule causes the emerging of a metal-2p core level component at lower binding energy with respect to that measured in the molecular thin films, while the core-levels associated to the organic macrocycle (C and N 1s) are less influenced by the adsorption, and the macrocycles stabilize the interaction, inducing a strong interface dipole. Temperature Programmed Desorption experiments and photoemission as a function of temperature allow to estimate the adsorption energy for the thin-films, mainly due to the molecule-molecule van der Waals interaction, while the FePc and CoPc single-layers remain adsorbed on the Au surface up to at least 820 K.

Relation between heavy metals level in soil and some economic ...

African Journals Online (AJOL)

Ekpo

Soil sample with the depth of (0-15cm), cassava leaves and, ... and P111. The high concentrations of trace metals recorded in the leaves of the plant species may be due to ... average temperature is between 250C and 360C ... the traditional land tenure system and the major crops ..... Historical records of metals pollution.

Metal Nitrides for Plasmonic Applications

DEFF Research Database (Denmark)

Naik, Gururaj V.; Schroeder, Jeremy; Guler, Urcan

2012-01-01

Metal nitrides as alternatives to metals such as gold could offer many advantages when used as plasmonic material. We show that transition metal nitrides can replace metals providing equally good optical performance for many plasmonic applications.......Metal nitrides as alternatives to metals such as gold could offer many advantages when used as plasmonic material. We show that transition metal nitrides can replace metals providing equally good optical performance for many plasmonic applications....

Variability and exposure classification of urinary levels of non-essential metals aluminum, antimony, barium, thallium, tungsten and uranium in healthy adult men.

Science.gov (United States)

Wang, Yi-Xin; Pan, An; Feng, Wei; Liu, Chong; Huang, Li-Li; Ai, Song-Hua; Zeng, Qiang; Lu, Wen-Qing

2017-12-21

Arsenic, cadmium and lead are well-known toxic metals, and there are substantial studies on variability of these metals in urine to optimize design of exposure assessment. For urinary levels of other nonessential metals such as aluminum (Al), antimony (Sb), barium (Ba), thallium (Tl), tungsten (W) and uranium (U), however, their within-individual and between-individual variability are unclear. Therefore, we collected 529 samples from 11 healthy adult men on 8 days during a 3-month period. We measured urinary metals and creatinine (Cr) levels, assessed the reproducibility using intraclass correlation coefficients (ICCs), and performed sensitivity and specificity analyses to assess how well 1, 2 or 3 specimens could classify exposure. Al, Sb, Ba, W and U levels measured from spot samples varied greatly over days and months (Cr-adjusted ICCs = 0.01-0.14). Serial measures of Tl levels measured from spot samples had fair-to-good reproducibility over 5 consecutive days (Cr-adjusted ICC = 0.40), but worsened when the specimens were collected months apart (Cr-adjusted ICC = 0.16). To identify men who were highly exposed (top 33%) based on their 3-month averages, tests of single spot samples and tests of first-morning voids had high specificities (0.73-0.85) but relatively low sensitivities (0.27-0.60). Collection of repeated urine specimens from each individual improved the classification.

Physicochemical Characteristics and Trace Metal Levels of Locally ...

African Journals Online (AJOL)

Michael Horsfall

Results from this study showed that the industrial and human activities in this study ... health hazard to their well water, and are therefore fit for their domestic activities. ... Bangladesh were natural levels of arsenic in ground ... This problem of.

Heavy metal levels in Sokoto metropolis as a result of local ...

African Journals Online (AJOL)

new user

2013-08-01

Aug 1, 2013 ... and geological factors) or human activities (industrial and agricultural activities) ... mulation of heavy metal; aluminium, cadmium, chromium iron, copper .... Traditional utensils: potentials sources of poisoning by heavy metals.

New Fe i Level Energies and Line Identifications from Stellar Spectra. II. Initial Results from New Ultraviolet Spectra of Metal-poor Stars

Energy Technology Data Exchange (ETDEWEB)

Peterson, Ruth C. [SETI Institute and Astrophysical Advances, 607 Marion Place, Palo Alto, CA 94301 (United States); Kurucz, Robert L. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Ayres, Thomas R., E-mail: peterson@ucolick.org [Center for Astrophysics and Space Astronomy, University of Colorado, 389 UCB, Boulder, CO 80309-0389 (United States)

2017-04-01

The Fe i spectrum is critical to many areas of astrophysics, yet many of the high-lying levels remain uncharacterized. To remedy this deficiency, Peterson and Kurucz identified Fe i lines in archival ultraviolet and optical spectra of metal-poor stars, whose warm temperatures favor moderate Fe i excitation. Sixty-five new levels were recovered, with 1500 detectable lines, including several bound levels in the ionization continuum of Fe i. Here, we extend the previous work by identifying 59 additional levels, with 1400 detectable lines, by incorporating new high-resolution UV spectra of warm metal-poor stars recently obtained by the Hubble Space Telescope Imaging Spectrograph. We provide gf values for these transitions, both computed as well as adjusted to fit the stellar spectra. We also expand our spectral calculations to the infrared, confirming three levels by matching high-quality spectra of the Sun and two cool stars in the H -band. The predicted gf values suggest that an additional 3700 Fe i lines should be detectable in existing solar infrared spectra. Extending the empirical line identification work to the infrared would help confirm additional Fe i levels, as would new high-resolution UV spectra of metal-poor turnoff stars below 1900 Å.

Current Status of Trace Metal Pollution in Soils Affected by Industrial Activities

Science.gov (United States)

Kabir, Ehsanul; Ray, Sharmila; Kim, Ki-Hyun; Yoon, Hye-On; Jeon, Eui-Chan; Kim, Yoon Shin; Cho, Yong-Sung; Yun, Seong-Taek; Brown, Richard J. C.

2012-01-01

There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (I geo), calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution. PMID:22645468

Current Status of Trace Metal Pollution in Soils Affected by Industrial Activities

Directory of Open Access Journals (Sweden)

Ehsanul Kabir

2012-01-01

Full Text Available There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (Igeo, calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution.

Geostatistical exploration of dataset assessing the heavy metal contamination in Ewekoro limestone, Southwestern Nigeria

Directory of Open Access Journals (Sweden)

Kehinde D. Oyeyemi

2017-10-01

Full Text Available The dataset for this article contains geostatistical analysis of heavy metals contamination from limestone samples collected from Ewekoro Formation in the eastern Dahomey basin, Ogun State Nigeria. The samples were manually collected and analysed using Microwave Plasma Atomic Absorption Spectrometer (MPAS. Analysis of the twenty different samples showed different levels of heavy metals concentration. The analysed nine elements are Arsenic, Mercury, Cadmium, Cobalt, Chromium, Nickel, Lead, Vanadium and Zinc. Descriptive statistics was used to explore the heavy metal concentrations individually. Pearson, Kendall tau and Spearman rho correlation coefficients was used to establish the relationships among the elements and the analysis of variance showed that there is a significant difference in the mean distribution of the heavy metals concentration within and between the groups of the 20 samples analysed. The dataset can provide insights into the health implications of the contaminants especially when the mean concentration levels of the heavy metals are compared with recommended regulatory limit concentration.

A HOT URANUS ORBITING THE SUPER METAL-RICH STAR HD 77338 AND THE METALLICITY-MASS CONNECTION

International Nuclear Information System (INIS)

Jenkins, J. S.; Hoyer, S.; Jones, M. I.; Rojo, P.; Day-Jones, A. C.; Ruiz, M. T.; Jones, H. R. A.; Tuomi, M.; Barnes, J. R.; Pavlenko, Y. V.; Pinfield, D. J.; Murgas, F.; Ivanyuk, O.; Jordán, A.

2013-01-01

We announce the discovery of a low-mass planet orbiting the super metal-rich K0V star HD 77338 as part of our ongoing Calan-Hertfordshire Extrasolar Planet Search. The best-fit planet solution has an orbital period of 5.7361 ± 0.0015 days and with a radial velocity semi-amplitude of only 5.96 ± 1.74 ms –1 , we find a minimum mass of 15.9 +4.7 -5.3 M ⊕ . The best-fit eccentricity from this solution is 0.09 +0.25 -0.09 , and we find agreement for this data set using a Bayesian analysis and a periodogram analysis. We measure a metallicity for the star of +0.35 ± 0.06 dex, whereas another recent work finds +0.47 ± 0.05 dex. Thus HD 77338b is one of the most metal-rich planet-host stars known and the most metal-rich star hosting a sub-Neptune-mass planet. We searched for a transit signature of HD 77338b but none was detected. We also highlight an emerging trend where metallicity and mass seem to correlate at very low masses, a discovery that would be in agreement with the core accretion model of planet formation. The trend appears to show that for Neptune-mass planets and below, higher masses are preferred when the host star is more metal-rich. Also a lower boundary is apparent in the super metal-rich regime where there are no very low mass planets yet discovered in comparison to the sub-solar metallicity regime. A Monte Carlo analysis shows that this low-mass planet desert is statistically significant with the current sample of 36 planets at the ∼4.5σ level. In addition, results from Kepler strengthen the claim for this paucity of the lowest-mass planets in super metal-rich systems. Finally, this discovery adds to the growing population of low-mass planets around low-mass and metal-rich stars and shows that very low mass planets can now be discovered with a relatively small number of data points using stable instrumentation.

Reference binding energies of transition metal carbides by core-level x-ray photoelectron spectroscopy free from Ar+ etching artefacts

Science.gov (United States)

Greczynski, G.; Primetzhofer, D.; Hultman, L.

2018-04-01

We report x-ray photoelectron spectroscopy (XPS) core level binding energies (BE's) for the widely-applicable groups IVb-VIb transition metal carbides (TMCs) TiC, VC, CrC, ZrC, NbC, MoC, HfC, TaC, and WC. Thin film samples are grown in the same deposition system, by dc magnetron co-sputtering from graphite and respective elemental metal targets in Ar atmosphere. To remove surface contaminations resulting from exposure to air during sample transfer from the growth chamber into the XPS system, layers are either (i) Ar+ ion-etched or (ii) UHV-annealed in situ prior to XPS analyses. High resolution XPS spectra reveal that even gentle etching affects the shape of core level signals, as well as BE values, which are systematically offset by 0.2-0.5 eV towards lower BE. These destructive effects of Ar+ ion etch become more pronounced with increasing the metal atom mass due to an increasing carbon-to-metal sputter yield ratio. Systematic analysis reveals that for each row in the periodic table (3d, 4d, and 5d) C 1s BE increases from left to right indicative of a decreased charge transfer from TM to C atoms, hence bond weakening. Moreover, C 1s BE decreases linearly with increasing carbide/metal melting point ratio. Spectra reported here, acquired from a consistent set of samples in the same instrument, should serve as a reference for true deconvolution of complex XPS cases, including multinary carbides, nitrides, and carbonitrides.

Processing and Prolonged 500 C Testing of 4H-SiC JFET Integrated Circuits with Two Levels of Metal Interconnect

Science.gov (United States)

Spry, David J.; Neudeck, Philip G.; Chen, Liangyu; Lukco, Dorothy; Chang, Carl W.; Beheim, Glenn M.; Krasowski, Michael J.; Prokop, Norman F.

2015-01-01

Complex integrated circuit (IC) chips rely on more than one level of interconnect metallization for routing of electrical power and signals. This work reports the processing and testing of 4H-SiC junction field effect transistor (JFET) prototype IC's with two levels of metal interconnect capable of prolonged operation at 500 C. Packaged functional circuits including 3- and 11-stage ring oscillators, a 4-bit digital to analog converter, and a 4-bit address decoder and random access memory cell have been demonstrated at 500 C. A 3-stage oscillator functioned for over 3000 hours at 500 C in air ambient. Improved reproducibility remains to be accomplished.

Estimation of metal uptake in plant parts of roadside grown maize at selected growth stages

OpenAIRE

Anongo, M'ember C.; Uyovbisere, Edward O.; Ekong, Nsima J.

2015-01-01

Health risk assessment of heavy metals in roadside grown foodcrops consumed by humans is a very good technique because such assessment would provide information about any threat regarding heavy metal contamination. Plant and corresponding soil samples were collected for trace metal analysis to ascertain potential health risks. The non-significant differences of lead (Pb) and cadmium (Cd) levels among the selected growth stages shows that the levels of Pb and Cd in the foodcrops were not influ...

HEAVY METALS LEVELS IN LARUS DOMINICANUS. CASE STUDY: COROA GRANDE MANGROVE, SEPETIBA BAY, RIO DE JANEIRO, BRAZIL

Directory of Open Access Journals (Sweden)

Aldo Pacheco Ferreira

2011-01-01

Full Text Available Samples of liver and kidney of Kelp gull (Larus dominicanus collected on Sepetiba Bay, Rio de Janeiro, Brazil, were analysed for their copper, zinc, cadmium, lead, chromium and nickel content. All the analyses were made using the inductively coupled plasma optical spectrometry method (ICP-OES. The investigation focused on the variability of the elements content in kidney and liver from a number of sampling seabirds and over different seasons. The results were interpreted using the analysis of variance test (ANOVA. This has revealed differences in concentration for the majority of elements with regard to organs, and how different sampling metals and organs are related to each other. Results indicate relatively high trace etalcontamination in L. dominicanus, showing potential power of idespread biological and mutagenic adverse effects in trophic levels, and herefore, signalling risk to human health.

Aldehyde dehydrogenase expression in Metaphire posthuma as a bioindicator to monitor heavy metal pollution in soil.

Science.gov (United States)

Panday, Raju; Bhatt, Padam Shekhar; Bhattarai, Tribikram; Shakya, Kumudini; Sreerama, Lakshmaiah

2016-11-21

Soil contamination and associated pollution plays a detrimental role in soil flora and fauna. Soil is processed and remodeled by subterranean earthworms, accordingly are referred to as soil chemical engineers. These worms, besides processing carbon and nitrogen, serve as minors for processing metals. In heavy metal contaminated soils, they accumulate heavy metals, which in turn cause altered gene expression, including aldehyde dehydrogenase (ALDH) enzymes. This study explores the possibility of ALDH expression in earthworms as a novel biomarker for the heavy metal contamination of soil. Earthworms cultured in contaminated soils accumulated significantly higher levels of Pb and Cd. Similarly, significantly higher levels of ALDH enzyme activities were observed in earthworms cultured in soils contaminated with Pb and Cd. The ALDH activity was found to be highest in worms cultured in 5 ppm heavy metal contaminated soils. Although, ALDH activities decreased as the heavy metal concentration in soil increased, they were significantly higher when compared to control worms cultured in uncontaminated soils. The accumulation of heavy metal in earthworms measured after 28 days decreased as the heavy metal concentration in soil increased. Levels of ALDH expression correlated with total Pb and Cd concentration in the earthworm tissue. This study showed that the ALDH activity in earthworms could potentially be used as a biomarker to show heavy metal pollution in soil.

Breeding performance of blue tits (Cyanistes caeruleus) and great tits (Parus major) in a heavy metal polluted area

Energy Technology Data Exchange (ETDEWEB)

Eeva, T., E-mail: tapio.eeva@utu.f [Section of Ecology, University of Turku, FIN-20014 Turku (Finland); Ahola, M.; Lehikoinen, E. [Section of Ecology, University of Turku, FIN-20014 Turku (Finland)

2009-11-15

We compared heavy metal levels, calcium levels, breeding parameters and condition of nestling and adult Cyanistes caeruleus and Parus major along a heavy metal pollution gradient. Both species started laying earlier and showed inferior nestling growth and smaller fledging probability in the polluted areas, which are phenologically advanced in spring due to sparse forests. The major inter-specific difference in the responses was that the clutch size and hatching success were decreased in the polluted area in P. major, but not in C. caeruleus. Heavy metal profiles in nestling feces were relatively similar in the two species, though Ni and Pb levels were higher in C. caeruleus than in P. major. However, the latter species showed markedly higher fecal calcium concentrations. Lower calcium levels and higher levels of some heavy metals in C. caeruleus suggest that in Ca-deficient environments this species might be more susceptible to negative pollution effects than P. major. - Breeding performance in two Parid species near a Cu smelter.

Breeding performance of blue tits (Cyanistes caeruleus) and great tits (Parus major) in a heavy metal polluted area

International Nuclear Information System (INIS)

Eeva, T.; Ahola, M.; Lehikoinen, E.

2009-01-01

We compared heavy metal levels, calcium levels, breeding parameters and condition of nestling and adult Cyanistes caeruleus and Parus major along a heavy metal pollution gradient. Both species started laying earlier and showed inferior nestling growth and smaller fledging probability in the polluted areas, which are phenologically advanced in spring due to sparse forests. The major inter-specific difference in the responses was that the clutch size and hatching success were decreased in the polluted area in P. major, but not in C. caeruleus. Heavy metal profiles in nestling feces were relatively similar in the two species, though Ni and Pb levels were higher in C. caeruleus than in P. major. However, the latter species showed markedly higher fecal calcium concentrations. Lower calcium levels and higher levels of some heavy metals in C. caeruleus suggest that in Ca-deficient environments this species might be more susceptible to negative pollution effects than P. major. - Breeding performance in two Parid species near a Cu smelter.

A method for the experimental determination of surface photoemission core-level shifts for 3d transition metals

NARCIS (Netherlands)

Shamsutdinov, N.R.; Sloof, W.G.; Böttger, A.J.

2005-01-01

A method is presented to determine the photoelectron surface core-level shift (SCLS) of 3d transition metals using x-ray photoelectron spectroscopy. The experimental difficulties arising from the relatively large broadening of photoemission lines in the 3d transition series can be overcome by the

Effects of alkali metal cations on phospho-enzyme levels and [3H] ouabain binding to (Na+ + K+)-ATPase.

Science.gov (United States)

Han, C S; Tobin, T; Akera, T; Brody, T M

1976-05-13

The effects of several alkali metal cations on the relationship between steady state phospho-enzyme levels and initial velocity and equilibrium levels of [3H]-ouabain binding to (Na+ + K+)-ATPase (ATP phosphohydrolase EC 3.6.1.3.) were examined. Only Na+ increased both phospho-enzyme and [3H] ouabain binding levels above those observed in the presence of Mg2+ alone. While Na+ stimulated phosphorylation with an apparent Km of about 1 mM, its stimulation of [3H] ouabain binding was biphasic, the lower Km for stimulation corresponding to the Km for formation of phospho-enzyme. Among the other alkali metal cations, potassium, rubidium and lithium were at least eight times more effect in reducing phospho-enzyme levels than in reducing [3H] ouabain binding. This discrepancy is not due to the stability of the enzyme-ouabain complex, nor to any action on the rates of formation or dissociation of the enzyme-ouabain complex. The data thus suggest that [3H] ouabain interacts with the K+, Rb+ or Li+ -enzyme complexes. For Li+, this hypothesis is further supported by the observation that Li+ can cirectly increase the equilibrium level of [3H] ouabain binding to this enzyme under certain conditions.

Size dependence of structural, magnetic, and electrical properties in corundum-type Ti2O3 nanoparticles showing insulator–metal transition

OpenAIRE

Yoshihiro Tsujimoto; Yoshitaka Matsushita; Shan Yu; Kazunari Yamaura; Tetsuo Uchikoshi

2015-01-01

Corundum-type Ti2O3 has been investigated over the last half century because it shows unusual insulator–metal (I-M) transition over a broad temperature range (420–550 K). In this work, we successfully synthesized Ti2O3 nanoparticles (20, 70, 300 nm in size) by the low-temperature reduction between precursors of rutile-type TiO2 and the reductant CaH2, in a non-topotactic manner. The reaction time required for obtaining the reduced phase increases with increasing the particle size. Synchrotron...

Surface Functionalization of g-C 3 N 4 : Molecular-Level Design of Noble-Metal-Free Hydrogen Evolution Photocatalysts

KAUST Repository

Chen, Yin; Lin, Bin; Yu, Weili; Yang, Yong; Bashir, Shahid M.; Wang, Hong; Takanabe, Kazuhiro; Idriss, Hicham; Basset, Jean-Marie

2015-01-01

A stable noble-metal-free hydrogen evolution photocatalyst based on graphite carbon nitride (g-C3N4) was developed by a molecular-level design strategy. Surface functionalization was successfully conducted to introduce a single nickel active site

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments.

Science.gov (United States)

Krami, Loghman Khoda; Amiri, Fazel; Sefiyanian, Alireza; Shariff, Abdul Rashid B Mohamed; Tabatabaie, Tayebeh; Pradhan, Biswajeet

2013-12-01

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF(G)) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF(G) techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF(G) technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.

The role of heavy metals and polychlorinated biphenyls (PCBs) in the oncogenesis of head and neck tumors and thyroid diseases: a pilot study.

Science.gov (United States)

Petrosino, V; Motta, G; Tenore, G; Coletta, M; Guariglia, A; Testa, D

2018-04-01

Previous literature has highlighted the mechanisms of molecular toxicity induced by substances such as arsenic, cadmium, chromium, nickel, lead, barium and PCBs. The research was carried out on 20 volunteers, all the patients gave their consent to the research: the aim of the study was to evaluate the presence of metals and PCBs in these different matrices (blood and hair), correlating the biochemical data to pathological conditions present, and also to the area in which patients resided. Various quantitative determinations were carried out on samples of blood and hair for 14 heavy metals and on blood samples for 12 PCBs. For the 11 patients the results indicated that blood levels for half of the 14 displayed heavy metals measured considerably higher compared to the reference values, whilst the levels measured in hair evidenced some positive values significantly higher than the maximum reference. Of the 12 PCBs assayed in blood some showed higher positive values compared to the maximum tabular reference (although there is no clear reference quantified in the WHO-2005 report). In the 9 healthy patients heavy metals in the blood were within the expected target range, with those showing positive results (≤ 3 out of 14 heavy metals for each patient) having values only slightly higher than the reference maximum. The levels of 14 heavy metals measured in hair were below thresholds, and levels for the 12 PCBs measured in blood showed negativity or positivity with values close to the minimum benchmarks. The analyses carried out on biological matrices have uncovered important and significant differences between healthy and unhealthy subjects, both qualitative and quantitative differences with respect to heavy metals and PCBs. All patients with head and neck cancer enlisted for the study had heavy metal and PCB blood levels at least twice the maximum reference level. The levels of heavy metals in hair were at least double the maximum reference. In contrast, all healthy

Predicting dietborne metal toxicity from metal influxes

Science.gov (United States)

Croteau, M.-N.; Luoma, S.N.

2009-01-01

Dietborne metal uptake prevails for many species in nature. However, the links between dietary metal exposure and toxicity are not well understood. Sources of uncertainty include the lack of suitable tracers to quantify exposure for metals such as copper, the difficulty to assess dietary processes such as food ingestion rate, and the complexity to link metal bioaccumulation and effects. We characterized dietborne copper, nickel, and cadmium influxes in a freshwater gastropod exposed to diatoms labeled with enriched stable metal isotopes. Metal influxes in Lymnaea stagnalis correlated linearly with dietborne metal concentrations over a range encompassing most environmental exposures. Dietary Cd and Ni uptake rate constants (kuf) were, respectively, 3.3 and 2.3 times higher than that for Cu. Detoxification rate constants (k detox) were similar among metals and appeared 100 times higher than efflux rate constants (ke). Extremely high Cu concentrations reduced feeding rates, causing the relationship between exposure and influx to deviate from linearity; i.e., Cu uptake rates leveled off between 1500 and 1800 nmol g-1 day-1. L. stagnalis rapidly takes up Cu, Cd, and Ni from food but detoxifies the accumulated metals, instead of reducing uptake or intensifying excretion. Above a threshold uptake rate, however, the detoxification capabilities of L. stagnalis are overwhelmed.

[Pollution Evaluation and Risk Assessment of Heavy Metals from Atmospheric Deposition in the Parks of Nanjing].

Science.gov (United States)

Wang, Cheng; Qian, Xin; Li, Hui-ming; Sun, Yi-xuan; Wang, Jin-hua

2016-05-15

Contents of heavy metals involving As, Cd, Cr, Cu, Ni, Pb and Zn from atmospheric deposition in 10 parks of Nanjing were analyzed. The pollution level, ecological risk and health risk were evaluated using Geoaccumulation Index, Potential Ecological Risk Index and the US EPA Health Risk Assessment Model, respectively. The results showed that the pollution levels of heavy metals in Swallow Rock Park, Swallow Rock Park and Mochou Lake Park were higher than the others. Compared to other cities such as Changchun, Wuhan and Beijing, the contents of heavy metals in atmospheric deposition of parks in Nanjing were higher. The evaluation results of Geoaccumulation Index showed that Pb was at moderate pollution level, Zn and Cu were between moderate and serious levels, while Cd was between serious and extreme levels. The ecological risk level of Cd was high. The assessment results of Health Risk Assessment Model indicated that there was no non-carcinogenic risk for all the seven heavy metals. For carcinogenic risk, the risks of Cd, Cr and Ni were all negligible (Risk < 1 x 10⁻⁶), whereas As had carcinogenic risk possibility but was considered to be acceptable (10⁻⁶ < Risk < 10⁻⁴).

Metal levels in flathead sole (Hippoglossoides elassodon) and great sculpin (Myoxocephalus polyacanthocephalus) from Adak Island, Alaska: Potential risk to predators and fishermen

International Nuclear Information System (INIS)

Burger, Joanna; Gochfeld, Michael; Jeitner, Christian; Burke, Sean; Stamm, Timothy

2007-01-01

Increasingly there is a need to assess the contaminant levels in fish as indicators of the health and well-being of both the fish and their consumers, including humans. This paper examines the levels of arsenic, cadmium, chromium, lead, manganese, mercury, and selenium in the kidney, liver, and muscle of great sculpin and flathead sole from Adak Island in the Aleutian Islands, Alaska. Both species are consumed by the local Aleuts and others. There were significant differences in the levels of heavy metals as a function of tissue for both fish species; the liver of sculpin and sole generally had the highest levels of most metals, except for arsenic, lead, and selenium. Sole had significantly higher mean levels of arsenic in kidney (32,384 vs. 531 ppb, wet weight), liver (18,954 vs. 2532 ppb), and muscle (19,452 vs. 1343 ppb) than did sculpin. Sole also had higher mean levels of cadmium (230 vs. 63 ppb), lead (1236 vs. 48 ppb), mercury (150 vs. 107 ppb), and selenium (5215 vs. 1861 ppb) in kidney than did sculpin. There were significant correlations among weight and length measurements for both species. However, except for mercury, there were few significant correlations among tissue types for most metals. Only mercury and manganese levels were significantly correlated with size for sculpin (but not for sole). Levels of arsenic, lead, and mercury may pose a risk to predators that consume them, and arsenic and mercury may pose a risk to human consumers

Changes in soluble metal concentrations induced by variable water table levels as response to liming and Phragmites australis growth in metal-polluted wetland soils: Management effectiveness

NARCIS (Netherlands)

Gonzalez Alcaraz, M.N.; van Gestel, C.A.M.

2016-01-01

This study aimed to assess the effectiveness of liming and Phragmites australis growth for the management of metal-polluted wetland soils under fluctuating water table levels. Soil columns (20 cm in diameter and 60 cm high) were constructed with two soil types (pH ~ 6.4 and pH ~ 3.1) and four

Accumulation and effects of metals in caged carp and resident roach along a metal pollution gradient

International Nuclear Information System (INIS)

Reynders, H.; Bervoets, L.; Gelders, M.; Coen, W.M. de; Blust, R.

2008-01-01

Metal accumulation and effects on plasma Ca 2+ , alanine transaminase (ALT) and fish condition factor were examined in caged carp (Cyprinus carpio) and resident roach (Rutilus rutilus) at four locations along the Grote Nete River system (Belgium). Cadmium and zinc accumulation were found in carp and roach, with highest concentrations at the most contaminated site (dissolved Cd: 1.82 μg/l, Zn: 967 μg/l). On the tissue level, highest cadmium concentrations were measured in kidneys of carp and roach, followed by gills, intestine and liver, while low concentrations were observed in carcass and muscle. For zinc, a similar pattern was observed (intestine > kidney > gills > liver > carcass > muscle). Comparison between species showed higher cadmium concentrations in feral roach, while zinc levels were lower, owing to the high zinc concentrations in control carp. Furthermore, comparison of metal concentrations between two sampling periods (2005 and 2000-2001) revealed a drastic decrease in cadmium concentration in gills, liver and muscle of roach, similar to the reduction in waterborne cadmium concentrations, while differences for zinc were much less pronounced. In addition to metal accumulation, increased metallothionein concentrations (∼ 2x) were found in carp and roach, while no metal-related effects were found on ALT, Ca 2+ or condition factor. However, negative effects on fish community structure, as assessed by the index of biotic integrity (IBI), were found along the pollution gradient and indicated long-term adverse effects of metal pollution

Accumulation and effects of metals in caged carp and resident roach along a metal pollution gradient

Energy Technology Data Exchange (ETDEWEB)

Reynders, H. [Department of Biology, Research Unit Ecophysiology, Biochemistry and Toxicology, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium)], E-mail: hans.reynders@ua.ac.be; Bervoets, L.; Gelders, M.; Coen, W.M. de; Blust, R. [Department of Biology, Research Unit Ecophysiology, Biochemistry and Toxicology, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp (Belgium)

2008-02-25

Metal accumulation and effects on plasma Ca{sup 2+}, alanine transaminase (ALT) and fish condition factor were examined in caged carp (Cyprinus carpio) and resident roach (Rutilus rutilus) at four locations along the Grote Nete River system (Belgium). Cadmium and zinc accumulation were found in carp and roach, with highest concentrations at the most contaminated site (dissolved Cd: 1.82 {mu}g/l, Zn: 967 {mu}g/l). On the tissue level, highest cadmium concentrations were measured in kidneys of carp and roach, followed by gills, intestine and liver, while low concentrations were observed in carcass and muscle. For zinc, a similar pattern was observed (intestine > kidney > gills > liver > carcass > muscle). Comparison between species showed higher cadmium concentrations in feral roach, while zinc levels were lower, owing to the high zinc concentrations in control carp. Furthermore, comparison of metal concentrations between two sampling periods (2005 and 2000-2001) revealed a drastic decrease in cadmium concentration in gills, liver and muscle of roach, similar to the reduction in waterborne cadmium concentrations, while differences for zinc were much less pronounced. In addition to metal accumulation, increased metallothionein concentrations ({approx} 2x) were found in carp and roach, while no metal-related effects were found on ALT, Ca{sup 2+}or condition factor. However, negative effects on fish community structure, as assessed by the index of biotic integrity (IBI), were found along the pollution gradient and indicated long-term adverse effects of metal pollution.

Determining site-specific background level with geostatistics for remediation of heavy metals in neighborhood soils

OpenAIRE

Tammy M. Milillo; Gaurav Sinha; Joseph A. Gardella Jr.

2017-01-01

The choice of a relevant, uncontaminated site for the determination of site-specific background concentrations for pollutants is critical for planning remediation of a contaminated site. The guidelines used to arrive at concentration levels vary from state to state, complicating this process. The residential neighborhood of Hickory Woods in Buffalo, NY is an area where heavy metal concentrations and spatial distributions were measured to plan remediation. A novel geostatistics based decision ...

Cleaning of dismantled metals by electropolishing

International Nuclear Information System (INIS)

Wei, T.Y.; Chung, Z.J.; Lu, D.L.; Hsieh, J.C.

1995-01-01

A project of cleaning dismantled metals is going on at INER. The test work has been performed. Results showed that the activity decreased from 45 microSv/h to background level after 20 minutes electrolytic polishing. These cleaned metals could be reused through melting and fabricating. These metals could also be classified as BRC waste to facilitate the waste management if they can pass the identification and be admitted by the government authority. In order to achieve the planned target, some electro-decontamination facilities have been established. An automatic electropolishing facility with six cells was designed to clean the contaminated metals in plate type with dimensions less than 50 cm x 50 cm. Another automatic electropolishing facility was specially designed for treating the contaminated pipes. In addition, mobile electropolishing facilities were also established for large pieces of metal and some fixed equipment. In this cleaning project, a practical recycling and treatment method for electrolyte has been developed in order to comply with the requirement of secondary waste minimization

Heavy metal tolerance in populations of Agrostis tenuis Sibth and other grasses

Energy Technology Data Exchange (ETDEWEB)

Gregory, R P.G.; Bradshaw, A D

1965-01-01

Populations of Agrostis tenuis can be found growing on a variety of different mine workings in conditions of metal contamination toxic to most higher plants. Samples of such populations together with samples of populations taken from ordinary pastures were tested for tolerance to high concentrations of copper, nickel, lead and zinc by measuring the effect of these metals on the rooting of tillers. The soils in which the populations were originally growing were analyzed for each of the four metals and the tolerances of the populations have been related to the levels of the metals in the soils. In general, the mine populations show remarkable tolerance to the particular metals present in high quantities in the soils of their original habitats: the pasture populations do not show this tolerance. The tolerance is specific, for, except in the case of zinc and nickel, tolerance to one metal is not accompanied by tolerance to any other. There must, therefore, be three specific tolerances in the one species. Individual tolerances can however occur together and this can be related to the occurrence of the two metals together in toxic quantities in the soil. The tolerances must be genetically controlled but the physiological mechanism involved is not clear. A number of other species were also shown to have populations tolerant to high levels of zinc. 27 references, 7 figures, 6 tables.

Spatiotemporal Analysis of Heavy Metal Water Pollution in Transitional China

Directory of Open Access Journals (Sweden)

Huixuan Li

2015-07-01

Full Text Available China’s socioeconomic transitions have dramatically accelerated its economic growth in last three decades, but also companioned with continuous environmental degradation. This study will advance the knowledge of heavy metal water pollution in China from a spatial–temporal perspective. Specifically, this study addressed the following: (1 spatial patterns of heavy metal water pollution levels were analyzed using data of prefecture-level cities from 2004 to 2011; and (2 spatial statistical methods were used to examine the underlying socioeconomic and physical factors behind water pollution including socioeconomic transitions (industrialization, urbanization, globalization and economic development, and environmental characteristic (natural resources, hydrology and vegetation coverage. The results show that only Cr pollution levels increased over the years. The individual pollution levels of the other four heavy metals, As, Cd, Hg, and Pb, declined. High heavy metal water pollution levels are closely associated with both anthropogenic activities and physical environments, in particular abundant mineral resources and industrialization prosperity. On the other hand, economic development and urbanization play important roles in controlling water pollution problems. The analytical findings will provide valuable information for policy-makers to initiate and adjust protocols and strategies for protecting water sources and controlling water pollution; thus improving the quality of living environments.

Concentration levels and spatial distribution of sulphur and metals in fine-grained sediments in western Finland

Directory of Open Access Journals (Sweden)

M. ÅSTRÖM

2008-12-01

Full Text Available On the coastal plains of Finland, widespread Holocene marine and lacustrine sediments have developed into acid sulphate soil as a result of extensive artificial drainage for agricultural purposes. This has caused a variety of environmental problems. The aim of this study was to determine the concentration levels and spatial distribution of sulphur, carbon and metals [titanium, vanadium, chromium, manganese (Mn, iron, cobalt (Co, nickel (Ni, copper (Cu, zinc (Zn] in these sediments, in order to increase the geochemical understanding of the parent materials from which acid sulphate soil develops. Sediment samples were collected at 317 sites from a depth of 1.5–3 m. While the sediments have high S (sulphide concentrations (median = 0.54% and thus a strong acidification potential, they carry transition metals mainly in smallsized silicates close to “background concentrations” far below contamination limits. The previously documented extensive release of Co, Cu, Mn, Ni and Zn from oxidised and acidified layers of these sediments (i.e. acid sulphate soil is thus not explained by anomalously high natural or anthropogenic metal concentrations of the soils/sediments, but by an inherent highly mobile metal pool. Spatial-distribution maps highlight areas of elevated S and Mn concentrations, where it is likely that ditching and subsequent oxidation will result in an exceptionally large release of protons and Mn respectively.;

Determination of Metal Levels in Shamma (Smokeless Tobacco) with Inductively Coupled Plasma Mass Spectrometry (ICP-MS) in Najran, Saudi Arabia

Science.gov (United States)

Brima, Eid Ibrahim

2016-10-01

Objective: The use of Shamma (smokeless tobacco) by certain groups is giving rise to health problems, including cancer, in parts of Saudi Arabia. Our objective was to determine metals levels in Shamma using inductively coupled plasma mass spectrometry (ICP-MS). Methods: Thirty-three samples of Shamma (smokeless tobacco) were collected, comprising four types: brown Shamma (n = 14.0), red Shamma (n = 9.0), white Shamma (n = 4.0), and yellow Shamma (n = 6.0). All samples were collected randomly from Shamma users in the city of Najran. Levels of 11 elements (Al, As, Cd, Co, Cr, Cu, Li, Mn, Ni, Pb, and Zn) were determined by ICP-MS. Results: A mixed standard (20 ppb) of all elements was used for quality control, and average recoveries ranged from 74.7% to 112.2%. The highest average concentrations were found in the following order: Al (598.8–812.2 μg/g), Mn (51.0–80.6 μg/g), and Ni (23.2–53.3 μg/g) in all four Shamma types. The lowest concentrations were for As (0.7–1.0 μg/g) and Cd (0.0–0.06 μg/g). Conclusions: The colour of each Shamma type reflects additives mixed into the tobacco. Cr and Cu were showed significant differences (P awareness about the safety and health effects of Shamma, which is clearly a source of oral exposure to metals. Creative Commons Attribution License

Assessment of heavy metals in Egretta thula: case study: Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil.

Science.gov (United States)

Ferreira, A P

2011-02-01

This study focuses on metals analysis in kidney and liver tissues of Egretta thula which were collected prostrate or newly dead in Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil, between March 2005 and October 2008. Kidney and liver were collected and analysed to evaluate heavy metal pollution. High values and widest range were detected for all metals in liver and kidney tissues. Geometric mean differences from metals concentrations for Zn, Cd, Ni, Pb, Cu, and Cr, respectively, were found in both organs. Results from linear regression analysis were non-significant in kidney (r = -0.79975, P = 0.10428), and in liver (r = -0.53193, P = 0.35618). With ANOVA analysis for metal accumulation differences (kidney*liver), at the 0.05 level, the results were significantly different (F = 33.17676, P = 0.00000; F = 12.47880, P = 0.00000). These results indicate that Sepetiba Bay shows worrying levels of metals in this study with E. thula, showing potential power of widespread biological and mutagenic adverse effects in trophic levels, and therefore, signalling risk to human health.

Assessment of heavy metals in Egretta thula: case study: Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

AP Ferreira

Full Text Available This study focuses on metals analysis in kidney and liver tissues of Egretta thula which were collected prostrate or newly dead in Coroa Grande mangrove, Sepetiba Bay, Rio de Janeiro, Brazil, between March 2005 and October 2008. Kidney and liver were collected and analysed to evaluate heavy metal pollution. High values and widest range were detected for all metals in liver and kidney tissues. Geometric mean differences from metals concentrations for Zn, Cd, Ni, Pb, Cu, and Cr, respectively, were found in both organs. Results from linear regression analysis were non-significant in kidney (r = -0.79975, P = 0.10428, and in liver (r = -0.53193, P = 0.35618. With ANOVA analysis for metal accumulation differences (kidney*liver, at the 0.05 level, the results were significantly different (F = 33.17676, P = 0.00000; F = 12.47880, P = 0.00000. These results indicate that Sepetiba Bay shows worrying levels of metals in this study with E. thula, showing potential power of widespread biological and mutagenic adverse effects in trophic levels, and therefore, signalling risk to human health.

Study of the levels of air pollution by heavy metals on an urban site of Algiers using neutron activation analysis (NAA)

International Nuclear Information System (INIS)

Khodja, Z.; Nedjar, A.; Azli, T.; Zergoug, Z.; Mouhouche, F.; Belamri, M.; Omari, L.; Lakhdar, C.C.

2010-01-01

Today, the high threshold reached by air pollution makes us become aware of the importance of the problem and the dangers which it represents for the health of the living beings and man in particular. The list of the atmospheric pollutants is long. To traditional usual but always real pollutants such as dust, SO 2 , Nox, CO, heavy metals, etc came to be added gradually to other substances such as gases for greenhouse effect: C0 2 , the CH 4 , the N 2 0, CFC, HFC, PFC and SF 6 and other substances such as ozone, the organochlorinated ones (dioxanes and furans), the HAP (Polycyclic Aromatic Hydrocarbons), etc. In Algeria, the lack of relative data to air quality makes that the impact of this form of pollution on the environment very badly known. The sources of pollution are numerous and the harmful effects are already perceived, but their direct relationship or indirect with the environmental pollution is not established. It is in this context and in continuity with work under development at the Nuclear Research Center of Algiers that we propose by this study the levels of air pollution by the fine particles and more particularly by heavy metals on the level of an urban site of Algiers with force directly exposed population density with the transmitting sources of pollution. We have used a nuclear method: neutron activation analysis technique (NAA), for the detection of traces of heavy metals in our samples of filters collected throughout one year at a rate of approximately a sample per week. One will note that this pollution varies considerably according to the components, in particular for Chromium (Cr), Iron (Fe), Mercury (Hg) and Cobalt (Co). The results were compared with other results obtained with other techniques and show a better sensitivity.

Analysis of metal contents in Portland Type V and MTA-based cements.

Science.gov (United States)

Dorileo, Maura Cristiane Gonçales Orçati; Bandeca, Matheus Coelho; Pedro, Fábio Luis Miranda; Volpato, Luiz Evaristo Ricci; Guedes, Orlando Aguirre; Dalla Villa, Ricardo; Tonetto, Mateus Rodrigues; Borges, Alvaro Henrique

2014-01-01

The aim of this study was to determine, by Atomic Absorption Spectrometry (AAS), the concentration levels of 11 metals in Type V gray and structural white PC, ProRoot MTA, and MTA Bio. Samples, containing one gram of each tested cement, were prepared and transferred to a 100 mL Teflon tube with a mixture of 7.0 mL of nitric acid and 21 mL of hydrochloric acid. After the reaction, the mixture was filtered and then volumed to 50 mL of distilled water. For each metal, specific patterns were determined from universal standards. Arsenic quantification was performed by hydride generator. The analysis was performed five times and the data were statistically analyzed at 5% level of significance. Only the cadmium presented concentration levels of values lower than the quantification limit of the device. The AAS analysis showed increased levels of calcium, nickel, and zinc in structural white PC. Type V PC presented the greatest concentration levels of arsenic, chromium, copper, iron, lead, and manganese (P cements, and the lowest concentration levels were observed in Portland cements, while the highest were observed in ProRoot MTA. Both PC and MTA-based cements showed evidence of metals inclusion.

Alkali metal and alkali metal hydroxide intercalates of the layered transition metal disulfides

International Nuclear Information System (INIS)

Kanzaki, Y.; Konuma, M.; Matsumoto, O.

1981-01-01

The intercalation reaction of some layered transition metal disulfides with alkali metals, alkali metal hydroxides, and tetraalkylammonium hydroxides were investigated. The alkali metal intercalates were prepared in the respective metal-hexamethylphosphoric triamide solutions in vaccuo, and the hydroxide intercalates in aqueous hydroxide solutions. According to the intercalation reaction, the c-lattice parameter was increased, and the increase indicated the expansion of the interlayer distance. In the case of alkali metal intercalates, the expansion of the interlayer distance increased continuously, corresponding to the atomic radius of the alkali metal. On the other hand, the hydroxide intercalates showed discrete expansion corresponding to the effective ionic radius of the intercalated cation. All intercalates of TaS 2 amd NbS 2 were superconductors. The expansion of the interlayer distance tended to increase the superconducting transition temperature in the intercalates of TaS 2 and vice versa in those of NbS 2 . (orig.)

Trace metal distributions in Posidonia oceanica and sediments from Taranto Gulf (Ionian Sea, Southern Italy

Directory of Open Access Journals (Sweden)

A. DI LEO

2013-03-01

Full Text Available Distribution of metals (Hg, Pb, Sn, Cu, Cd and Zn was determined in sediments and in different tissues of Posidonia oceanica collected from San Pietro Island, Taranto Gulf (Ionian Sea, Southern Italy. In seagrass, results, compared with metal concentrations in sediments, showed that the highest concentrations of Hg, Pb, Sn and Cu were found in the roots, while in the green leaves were found the highest levels of Cd and Zn. Instead the lowest metal concentrations were found in the basal part of the leaf. Levels of  metals in the leaves were similar to those found by other authors in uncontaminated areas of the Mediterranean Sea. Mercury levels in roots were correlated to levels in sediments. This could demonstrate the plant memorizes sediments contamination . This study reinforces the usefulness and the relevance of Posidonia oceanica as an indicator of spatial metal contamination and an interesting tool for environmental quality evaluation.

Healthy looking hospital nurses showing vitamin d deficiency: correlation of vitamin d levels with their levels of parathhyroid hormone and bone turnover markers

International Nuclear Information System (INIS)

Nasim, A.; Salim, B.; Niazi, S.; Fatima, N.

2015-01-01

To evaluate the correlation of low vitamin D levels with parathyroid hormone (PTH) levels and bone turn over markers among apparently healthy hospital nurses. Methods: Screening was done on 50 recruited healthy female nursing staff, aged between 18 to 35 years, for vitamin D levels. Among them 31 were found to be deficient in vitamin D. These 31 nurses were selected for further evaluation in trance. Their vitamin D levels were calculated by using the electrochemiluminescence immunoassay. Blood samples were drawn to estimate serum PTH levels accordingly. Samples were also collected from these recruited subjects to evaluate their bone turn over markers, including, osteocalcin, procollagen type 1 N propeptide and Beta-Crosslaps. Results: Out of 50 subjects, 31 subjects were found to have Vitamin D levels below 50 nmol/l. Out of these 31 subjects, 13 subjects, 41.9%, showed vitamin D levels below 20 nmol/l. Among these 13 subjects, all had significantly raised PTH levels (p-value: <0.001, r-value: -0.781). In rest of all the subjects, including those having Vitamin D levels above 20nmol/l, inordinately, PTH levels were normal. No reciprocity was found between low Vitamin D and raised PTH levels with bone turnover markers, except with P1NP (r-value 0.022). Conclusion: PTH levels show a steep augmentation in serum, when vitamin D levels hit the trough below 20 nmol/l. These are the subjects who should be treated prior to the development of complications of bone resorption. Moreover we could not find any significant correlation of Vitamin D and PTH with any bone turnover marker except P1NP. (author)

Effect of mining on heavy metal concentration in soils from the vicinity of Itakpe iron ore mine in kogi state, nigeria

International Nuclear Information System (INIS)

Amune, C.O.M.; Kakulu, S.

2013-01-01

The effects of mining oil from 1takpe iron ore mining area in Kogi State, Nigeria were studied through the determination of the heavy metals (Cd, Cu, Mg, Ni. Ph and Zn) using flame atomic absorption spectroscopy. Soil samples were collected during the dry and rainy seasons. Significant levels of heavy metals were found. Median topsoil concentrations (0-15 cm) for Ed, Cu, Mg, Ni, Pb and Zn were 0.16+0.02, 0.151-0.03, 0.041+0.03, 0.110.02, 0.07+0.(0 1, 0.04+0.04, micro/g, respectively. The heavy metal concentrations of control soil were relatively lower than those in the 1takpe mining environment soil and within levels of total metal contamination nation in the normal soil content intervals and maximum allowable limits of heavy metals in soils. Correlations analysis shows that heavy metals were closely correlated with each other except for Pb, indicating the studied metals are from the same pollutant resource. This shows, mining as contributing to the metallic levels in the 1takpe mining site. (author)

Accumulation of heavy metals by lettuce (lactuca sativa l.) irrigated with different levels of wastewater of Quetta City

International Nuclear Information System (INIS)

Achakzai, A.K.K.

2011-01-01

Heavy metal contamination of soils resulting from irrigation by wastewater is causing major concern due to the potential health risk involved. This study was therefore designed to investigate the heavy metal ions viz., Cu/sup 2/sup +/, Fe/sup 2+/, Mn/sup 2+/, Zn/sup 2+/, Pb/sup 2+/, Ni/sup 2+ and Cd/sup 2+/ concentrations by lettuce (Lactuca sativa L.) grown in pots. This leafy vegetable was irrigated with 5 different concentrations of wastewater collected from 3 different localities viz., Chiltan town, Chiltan Ghee Mill (oil industry) and Zarghoon town of Quetta city. Tap water was used as background water. Plant samples were analyzed for their heavy metal contents using Atomic Absorption Spectroscopy (AAS). Results showed that localities, treatments and their interactions (except Cu/sup 2+/ and Pb/sup 2+/) generally exhibited highly significant (P=0.01) influence on the accumulation of heavy metals. The maximum values of 9.71; 509.06; 32.47; 94.38; 8.58; 5.05 and 7.45 mg kg/sup -1/ for Cu/sup 2+/, total Fe/sup 2+/, Mn/sup 2+/, Zn/sup 2+/, Ni/sup 2+/,Pb/sup 2+/, and Cd/sup 2+/ respectively, were generally obtained in highest concentration of effluents. While maximum values of 9.02; 4.47 and 7.90 mg kg-1 of Cu/sup 2+/, Ni/sup 2+/ and Cd/sup 2+/ were obtained for Chiltan ghee mill effluents. However, maximum values i.e., 435.96 and 80.47 mg kg-1 of total Fe and Zn/sup 2+/ were recorded for Chiltan town. The highest values of 30.09 and 6.32 mg kg-1 for Mn/sup 2+/ and Pb/sup 2+/ were noted in Zarghoon town, respectively. On the basis of grand mean values,the magnitude of heavy metals detected for various metals is in order: Fe > Zn >Mn> Cu >Pb> Cd > Ni. Results further demonstrated that the total concentrations of Cu/sup 2+/, Fe/sup 2+/, Mn/sup 2+/, Zn/sup 2+/ and Ni/sup 2+/ are within the recommended international standards set by WHO/FAO, but could be reached to toxic level either by the consecutive use of effluents or by increased dietary pattern of the consumers

Metal Matrix Composite Solar Cell Metallization

Directory of Open Access Journals (Sweden)

Wilt David M.

2017-01-01

Full Text Available Advanced solar cells are moving to ever thinner formats in order to save mass and in some cases improve performance. As cells are thinned, the possibility that they may fracture or cleave due to mechanical stresses is increased. Fractures of the cell can degrade the overall device performance if the fracture propagates through the contact metallization, which frequently occurs. To address this problem, a novel semiconductor metallization system based on multi-walled carbon nanotube (CNT reinforcement, termed metal matrix composite (MMC metallization is under investigation. Electro-mechanical characterization of MMC films demonstrate their ability to provide electrical conductivity over >40 micron wide cracks in the underlying semiconductor, with the carbon nanotubes bridging the gap. In addition, these materials show a “self-healing” behaviour, electrically reconnecting at ~30 microns when strained past failure. Triple junction (TJ space cells with MMC metallization demonstrated no loss in Jsc after intentional fracture, whereas TJ cells with conventional metallization suffer up to 50% Jsc loss.

Functional and compositional responses in soil microbial communities along two metal pollution gradients: does the level of historical pollution affect resistance against secondary stress?

NARCIS (Netherlands)

Azarbad, H.; Niklinska, M.; Nikiel, K.; van Straalen, N.M.; Röling, W.F.M.

2015-01-01

We examined how the exposure to secondary stressors affected the functional and compositional responses of microbial communities along two metal pollution gradients in Polish forests and whether responses were influenced by the level of metal pollution. Basal respiration rate and community

Effects of metal pollution on earthworm communities in a contaminated floodplain area: Linking biomarker, community and functional responses

International Nuclear Information System (INIS)

Gestel, Cornelis A.M. van; Koolhaas, Josee E.; Hamers, Timo; Hoppe, Maarten van; Roovert, Martijn van; Korsman, Cora; Reinecke, Sophie A.

2009-01-01

Effects on earthworms in the contaminated floodplain area the Biesbosch, the Netherlands, were determined at different levels of organization using a combination of field and laboratory tests. The species Lumbricus rubellus, collected from different polluted sites in the Biesbosch, showed reduced values for the biomarker neutral red retention time (NRRT), mainly explained by high metal concentrations in the soil and the resulting high internal copper concentrations in the earthworms. Organic pollutant levels in earthworms were low and did not explain reduced NRRTs. Earthworm abundance and biomass were not correlated with pollutant levels in the soil. Litterbag decomposition and bait-lamina feeding activity, measures of the functional role of earthworms, were not affected by metal pollution and did not show any correlation with metal concentrations in soil or earthworms nor with NRRT. Effects at the biochemical level therefore did not result in a reduced functioning of earthworm communities. - Metal pollution in floodplain soils does affect earthworm biomarker response but not their activity in decomposition processes

Effects of metal pollution on earthworm communities in a contaminated floodplain area: Linking biomarker, community and functional responses

Energy Technology Data Exchange (ETDEWEB)

Gestel, Cornelis A.M. van [Institute of Ecological Science, VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands)], E-mail: kees.van.gestel@falw.vu.nl; Koolhaas, Josee E. [Institute of Ecological Science, VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Hamers, Timo [Institute of Environmental Studies, VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Hoppe, Maarten van; Roovert, Martijn van; Korsman, Cora [Institute of Ecological Science, VU University, De Boelelaan 1085, 1081 HV Amsterdam (Netherlands); Reinecke, Sophie A. [Department of Botany and Zoology, University of Stellenbosch, Private bag X1, Matieland 7602 (South Africa)

2009-03-15

Effects on earthworms in the contaminated floodplain area the Biesbosch, the Netherlands, were determined at different levels of organization using a combination of field and laboratory tests. The species Lumbricus rubellus, collected from different polluted sites in the Biesbosch, showed reduced values for the biomarker neutral red retention time (NRRT), mainly explained by high metal concentrations in the soil and the resulting high internal copper concentrations in the earthworms. Organic pollutant levels in earthworms were low and did not explain reduced NRRTs. Earthworm abundance and biomass were not correlated with pollutant levels in the soil. Litterbag decomposition and bait-lamina feeding activity, measures of the functional role of earthworms, were not affected by metal pollution and did not show any correlation with metal concentrations in soil or earthworms nor with NRRT. Effects at the biochemical level therefore did not result in a reduced functioning of earthworm communities. - Metal pollution in floodplain soils does affect earthworm biomarker response but not their activity in decomposition processes.

Semi-metallic polymers

DEFF Research Database (Denmark)

Bubnova, Olga; Khan, Zia Ullah; Wang, Hui

2014-01-01

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report...... that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being...... a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics....

Heavy metal levels in dune sands from Matanzas urban resorts and Varadero beach (Cuba): Assessment of contamination and ecological risks.

Science.gov (United States)

Díaz Rizo, Oscar; Buzón González, Fran; Arado López, Juana O; Denis Alpízar, Otoniel

2015-12-30

Concentrations of chromium (Cr), nickel (Ni), copper (Cu), zinc (Zn) and lead (Pb) in dune sands from six urban and suburban Matanzas (Cuba) resorts and Varadero beach were estimated by X-ray fluorescence analysis. Ranges of metal contents in dune sands show a strong variation across the studied locations (in mg/kg(-1)): 20-2964 for Cr, 17-183 for Ni, 17-51 for Cu, 18-88 for Zn and 5-29 for Pb. The values of contamination factors and contamination degrees how that two of the studied Matanzas's resorts (Judio and Chirry) are strongly polluted. The comparison with Sediment Quality Guidelines shows that dune sands from Judio resort represent a serious risk for humans, due to polluted Cr and Ni levels, while sands from the rest of the studied resorts, including Varadero beach, do not represent any risk for public use. Copyright © 2015 Elsevier Ltd. All rights reserved.

Environmental Health Risks Due to Anthropogenic Metals in Mtoni ...

African Journals Online (AJOL)

MARS) and analysis was carried out using a High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS). Sandy particles were dominant, with < 6% of OM in estuary and < 9% in tributaries. Metal levels showed neither ...

Heavy metals in red crabs, Chaceon quinquedens, from the Gulf of Mexico.

Science.gov (United States)

Perry, Harriet; Isphording, Wayne; Trigg, Christine; Riedel, Ralf

2015-12-30

The red crab, Chaceon quinquedens, is distributed in deep waters of the Gulf of Mexico (GOM) and is most abundant in an area associated with sediment deposition from the Mississippi River. Sediment geochemistry and biological and ecological traits of red crabs favor accumulation of contaminants. Red crabs, sediment, and bottom water samples were taken from three distinct geographic locations representing areas with differing exposure to contaminant laden effluents from the Mississippi River. Inductively coupled plasma spectrophotometry and atomic absorption spectrophotometry were employed to determine levels of heavy metals in red crab muscle tissue. Ion site partitioning was used to determine metal speciation in sediments. Red crabs showed evidence of heavy metal bioaccumulation in all sample areas with high variability in contaminant levels in individual crabs for some metals. Bioavailability of metals in sediment did not always result in accumulation in muscle tissue. Copyright © 2015 Elsevier Ltd. All rights reserved.

Physicochemical Characteristics and Heavy Metal Levels in Water ...

African Journals Online (AJOL)

MICHAEL

installations and automobiles, petrochemical industries, the glass factory and other product industries. Mining as well as other domestic activities contributes to heavy metal concentration and sediment load within an environment. This is the case with the Ashaka and Ughelli rivers where oil exploratory activities have led to ...

Cavitation instabilities between fibres in a metal matrix composite

DEFF Research Database (Denmark)

Tvergaard, Viggo

2016-01-01

induced by bonding to the ceramics that only show elastic deformation. In an MMC the stress state in the metal matrix is highly non-uniform, varying between regions where shear stresses are dominant and regions where hydrostatic tension is strong. An Al–SiC whisker composite with a periodic pattern......Short fibre reinforced metal matrix composites (MMC) are studied here to investigate the possibility that a cavitation instability can develop in the metal matrix. The high stress levels needed for a cavitation instability may occur in metal–ceramic systems due to the constraint on plastic flow...... of transversely staggered fibres is here modelled by using an axisymmetric cell model analysis. First the critical stress level is determined for a cavitation instability in an infinite solid made of the Al matrix material. By studying composites with different distributions and aspect ratios of the fibres...

Determination of the Levels of some Heavy Metals in Urban Run

African Journals Online (AJOL)

The heavy metals in urban road sediments take their origin from sources such as vehicles, road wear, activities of roadside artisans (battery charging, vehicle repairs, iron-bending, vehicle painting and panel beating) and emissions and /or discharges fi'om industries. The metals come mainly from vehicular activities such as ...

Effects of heavy metal pollution on red wood ant (Formica s. str.) populations

International Nuclear Information System (INIS)

Eeva, T.; Sorvari, J.; Koivunen, V.

2004-01-01

We studied the species composition, mound population densities, relative abundance and colony sizes of red wood ants along a well known air pollution gradient of a copper smelter in Southwest Finland. The dominant species, Formica aquilonia, was further studied for heavy metal (Al, Cu, Cd, Ni, Zn, As, Pb, Hg) levels and morphological characters (body mass, head width, labial gland disease) of workers. We found five species belonging to Formica s. str., and two of them showed changes in their relative abundance, which could not be explained by natural habitat differences. Nest mound volumes were 34% smaller in the polluted area, suggesting that smaller colonies can be maintained there. The heavy metal levels in F. aquilonia workers were higher in the polluted area for all metals, except Hg. The largest relative differences between the study areas (polluted/unpolluted) were found for As (4.1), Ni (2.4), Cu (2.1) and Pb (1.8). Morphological characters of workers were not related to the heavy metal levels. Our data showed that red wood ants can tolerate relatively high amounts of heavy metals and maintain reproducing colonies even in a heavily polluted area, but on the basis of smaller colony sizes, pollution stress may also cause trade-offs in reproduction. - Capsule: Five species of red wood ants vary in their sensitivity to heavy metal pollution but all of them had smaller colonies in a polluted area

Contrasting levels of heavy metals in the feathers of urban pigeons from close habitats suggest limited movements at a restricted scale

International Nuclear Information System (INIS)

Frantz, Adrien; Pottier, Marie-Anne; Karimi, Battle; Corbel, Hélène; Aubry, Emmanuel; Haussy, Claudy; Gasparini, Julien; Castrec-Rouelle, Maryse

2012-01-01

Despite restrictions in emissions, heavy metals may remain a major environmental issue due to their numerous sources and their persistence. Here, we assessed current levels of 4 metals (Copper, Cadmium, Lead, Zinc) in the feathers of 91 feral pigeons (Columba livia) from 7 sites in the urbanized region of Paris. Elements were detected in all pigeons, indicating that metals persist in urbanized areas. The ratio between metal concentrations in the feathers vs. in the environment calculated using data from other studies was 2–90 times higher for cadmium than for other metals, underlying its ecological importance. Concentrations in the feathers depended on locality, suggesting that pigeons remain in local habitats at this restricted scale, as expected from previous observations. Overall, our study suggests that urban feral pigeons may represent a good model system for metal biomonitoring. Highlights: ► We measured the concentrations of 4 heavy metals in pigeon feathers through Paris. ► Cadmium, Copper, Lead and Zinc were present in pigeons from all 7 sites. ► Metals thus still persist in the city though their emissions have been reduced. ► Metal concentrations in the feathers depended on the local origin of the pigeons. ► These differences suggest limited pigeon movements at a very restricted scale. - Concentrations of metals in the feathers of Parisian feral pigeons (Columba livia) strongly differ at a restricted spatial scale, suggesting limited movements in urban areas.

MetalS(3), a database-mining tool for the identification of structurally similar metal sites.

Science.gov (United States)

Valasatava, Yana; Rosato, Antonio; Cavallaro, Gabriele; Andreini, Claudia

2014-08-01

We have developed a database search tool to identify metal sites having structural similarity to a query metal site structure within the MetalPDB database of minimal functional sites (MFSs) contained in metal-binding biological macromolecules. MFSs describe the local environment around the metal(s) independently of the larger context of the macromolecular structure. Such a local environment has a determinant role in tuning the chemical reactivity of the metal, ultimately contributing to the functional properties of the whole system. The database search tool, which we called MetalS(3) (Metal Sites Similarity Search), can be accessed through a Web interface at http://metalweb.cerm.unifi.it/tools/metals3/ . MetalS(3) uses a suitably adapted version of an algorithm that we previously developed to systematically compare the structure of the query metal site with each MFS in MetalPDB. For each MFS, the best superposition is kept. All these superpositions are then ranked according to the MetalS(3) scoring function and are presented to the user in tabular form. The user can interact with the output Web page to visualize the structural alignment or the sequence alignment derived from it. Options to filter the results are available. Test calculations show that the MetalS(3) output correlates well with expectations from protein homology considerations. Furthermore, we describe some usage scenarios that highlight the usefulness of MetalS(3) to obtain mechanistic and functional hints regardless of homology.

Chemistry-driven structural alterations in short-term retrieved ceramic-on-metal hip implants: Evidence for in vivo incompatibility between ceramic and metal counterparts.

Science.gov (United States)

Zhu, Wenliang; Pezzotti, Giuseppe; Boffelli, Marco; Chotanaphuti, Thanainit; Khuangsirikul, Saradej; Sugano, Nobuhiko

2017-08-01

Ceramic-on-metal (CoM) hip implants were reported to experience lower wear rates in vitro as compared to metal-on-metal (MoM) bearings, thus hinting metal-ion release at lower levels in vivo. In this article, we show a spectroscopic study of two short-term retrieval cases of zirconia-toughened alumina (ZTA) femoral heads belonging to CoM hip prostheses, which instead showed poor wear performances in vivo. Metal contamination and abnormally high fractions of tetragonal-to-monoclinic (t→m) polymorphic transformation of the zirconia phase could be found on both ZTA heads, which contrasted with the optimistic predictions of in vitro experiments. At the molecular scale, incorporation of metal ions into the ceramic lattices could be recognized as due to frictionally assisted phenomena occurring at the ceramic surface. Driven by abnormal friction, diffusion of metal ions induced lattice shrinkage in the zirconia phases, while residual stress fields became stored at the surface of the femoral head. Diffusional alterations destabilized the chemistry of the ceramic surface and resulted in an abnormal increase in t→m phase transformation in vivo. Frictionally driven metal transfer to the ceramic lattice thus hinders the in vivo performance of CoM prostheses. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1469-1480, 2017. © 2016 Wiley Periodicals, Inc.

On the road to metallic nanoparticles by rational design: bridging the gap between atomic-level theoretical modeling and reality by total scattering experiments

Science.gov (United States)

Prasai, Binay; Wilson, A. R.; Wiley, B. J.; Ren, Y.; Petkov, Valeri

2015-10-01

The extent to which current theoretical modeling alone can reveal real-world metallic nanoparticles (NPs) at the atomic level was scrutinized and demonstrated to be insufficient and how it can be improved by using a pragmatic approach involving straightforward experiments is shown. In particular, 4 to 6 nm in size silica supported Au100-xPdx (x = 30, 46 and 58) explored for catalytic applications is characterized structurally by total scattering experiments including high-energy synchrotron X-ray diffraction (XRD) coupled to atomic pair distribution function (PDF) analysis. Atomic-level models for the NPs are built by molecular dynamics simulations based on the archetypal for current theoretical modeling Sutton-Chen (SC) method. Models are matched against independent experimental data and are demonstrated to be inaccurate unless their theoretical foundation, i.e. the SC method, is supplemented with basic yet crucial information on the length and strength of metal-to-metal bonds and, when necessary, structural disorder in the actual NPs studied. An atomic PDF-based approach for accessing such information and implementing it in theoretical modeling is put forward. For completeness, the approach is concisely demonstrated on 15 nm in size water-dispersed Au particles explored for bio-medical applications and 16 nm in size hexane-dispersed Fe48Pd52 particles explored for magnetic applications as well. It is argued that when ``tuned up'' against experiments relevant to metals and alloys confined to nanoscale dimensions, such as total scattering coupled to atomic PDF analysis, rather than by mere intuition and/or against data for the respective solids, atomic-level theoretical modeling can provide a sound understanding of the synthesis-structure-property relationships in real-world metallic NPs. Ultimately this can help advance nanoscience and technology a step closer to producing metallic NPs by rational design.The extent to which current theoretical modeling alone can

Heavy metal levels and physical parameters of drainage ways and ...

African Journals Online (AJOL)

The results show that in the gold mining area of Tarkwa, Hg levels decreased downstream from 5.40 (x10-3) mg/l to 2.80 (x10-3) mg/l. Arsenic levels, in contrast, ranged from 6.70 to 9.00 mg/l with no indication of any gradient. Iron levels, like Hg, decreased downstream, varying from 6.25 through 5.38 to 3.50 mg/l.

Effect of heavy metals on growth and heavy metal content of Allium porrum L. and Pisum sativum L

Energy Technology Data Exchange (ETDEWEB)

Gruenhage, L.; Jaeger, H.J.

1985-01-01

The effects of cadmium, lead, zinc and copper, singly and in combination, on yield, heavy metal content and the mineral composition of Allium porrum L. and Pisum sativum L. have been investigated. The Cd, Pb, Zn and Cu concentrations of shoots and roots of Allium porrum increased with increasing heavy metal contamination of soil. However, no visible symptoms of heavy metal toxicity were recognized. The dry matter production was reduced as a function of heavy metal concentration and combination. The mechanisms of combinations were mostly synergistic. The correlation between pollutant contents (nmol/shoot) and yield was higher than the correlation between heavy metal concentrations of soil or shoots (ppm) and yield. Results of regression analyses showed that the inhibition of copper translocation caused by Cd, Pb and Zn was responsible for the yield depressions. The antagonism between Cd and N-deficiency showed that the level of N-supply was without negative effects on yield depressions of Pisum sativum caused by Cd. In contrast to this, the N-form played an important role in Cd-toxicity as the synergism between Cd and NH4 illustrated. K-deficiency as well as acidic nutrient solution (pH=4) diminished the root/shoot-barrier for Cd and therefore Cd-translocation from roots to shoots increased. Concerning calcium, magnesium and iron the decrease of ion uptake caused by Cd was statistically significant higher than yield depression.

Durability of metals from archaeological objects, metal meteorites, and native metals

International Nuclear Information System (INIS)

Johnson, A.B. Jr.; Francis, B.

1980-01-01

Metal durability is an important consideration in the multi-barrier nuclear waste storage concept. This study summarizes the ancient metals, the environments, and factors which appear to have contributed to metal longevity. Archaeological and radiochemical dating suggest that human use of metals began in the period 6000 to 7000 BC. Gold is clearly the most durable, but many objects fashioned from silver, copper, bronze, iron, lead, and tin have survived for several thousand years. Dry environments, such as tombs, appear to be optimum for metal preservation, but some metals have survived in shipwrecks for over a thousand years. The metal meteorites are Fe-base alloys with 5 to 60 wt% Ni and minor amounts of Co, I, and S. Some meteoritic masses with ages estimated to be 5,000 to 20,000 years have weathered very little, while other masses from the same meteorites are in advanced stages of weathering. Native metals are natural metallic ores. Approximately five million tonnes were mined from native copper deposits in Michigan. Copper masses from the Michigan deposits were transported by the Pleistocene glaciers. Areas on the copper surfaces which appear to represent glacial abrasion show minimal corrosion. Dry cooling tower technology has demonstrated that in pollution-free moist environments, metals fare better at temperatures above than below the dewpoint. Thus, in moderate temperature regimes, elevated temperatures may be useful rather than detrimental for exposures of metal to air. In liquid environments, relatively complex radiolysis reactions can occur, particularly where multiple species are present. A dry environment largely obviates radiolysis effects

Durability of metals from archaeological objects, metal meteorites, and native metals

Energy Technology Data Exchange (ETDEWEB)

Johnson, A.B. Jr.; Francis, B.

1980-01-01

Metal durability is an important consideration in the multi-barrier nuclear waste storage concept. This study summarizes the ancient metals, the environments, and factors which appear to have contributed to metal longevity. Archaeological and radiochemical dating suggest that human use of metals began in the period 6000 to 7000 BC. Gold is clearly the most durable, but many objects fashioned from silver, copper, bronze, iron, lead, and tin have survived for several thousand years. Dry environments, such as tombs, appear to be optimum for metal preservation, but some metals have survived in shipwrecks for over a thousand years. The metal meteorites are Fe-base alloys with 5 to 60 wt% Ni and minor amounts of Co, I, and S. Some meteoritic masses with ages estimated to be 5,000 to 20,000 years have weathered very little, while other masses from the same meteorites are in advanced stages of weathering. Native metals are natural metallic ores. Approximately five million tonnes were mined from native copper deposits in Michigan. Copper masses from the Michigan deposits were transported by the Pleistocene glaciers. Areas on the copper surfaces which appear to represent glacial abrasion show minimal corrosion. Dry cooling tower technology has demonstrated that in pollution-free moist environments, metals fare better at temperatures above than below the dewpoint. Thus, in moderate temperature regimes, elevated temperatures may be useful rather than detrimental for exposures of metal to air. In liquid environments, relatively complex radiolysis reactions can occur, particularly where multiple species are present. A dry environment largely obviates radiolysis effects.

Investigation of heavy metals in sweets from different shop of peshawar city

International Nuclear Information System (INIS)

Noor, S.; Wajid, A.; Shah, J.; Peerzada, N.

2007-01-01

A study was carried out to determine the contents of heavy metals in sweets by Atomic Absorption Spectrophotometry. Six varieties of sweets, including Gulab Jamun, Rasgula, Patesa white chum chum, colored chumchum and Basin Ka laddoo, from eight shops of Peshawar were analyzed. The metals investigated were Fe, Ni, Cu, Mn, Ph and Cd. The level of Fe 6.11+- 0.15-17.65+- 0.16ppm and Mn 5.32 +- 0.06-10.84+- 0.05 ppm was found to be highest. The overall concentration of metals showed that metal load in sweets of all shops seem to be in the limits offered by RDA for respective metals. (author)

Investigation of heavy metals content in medicinal plant, eclipta alba L

International Nuclear Information System (INIS)

Hussain, I.; Khan, H.

2010-01-01

Heavy metal such as Cr, Fe, Zn, Mn, Ni, Pb, Cu and Cd were investigated in a= medicinally important plant, Eclipta alba L. as well as in the soil it was grown using atomic absorption spectrophotometer. The plant samples were collected from their natural habitat at three different locations of Peshawar Pakistan. The whole plant materials (roots, stems and leaves) were found to contain all heavy metals except Cd, which corresponds to their concentration in the soil it was grown. Among all the heavy metals, Fe was found to be at the highest level (8.95 to 27.7 mg/kg) followed by Mn (0.44 to 14.0 mg/kg) and Zn (1.04 to 4.50 mg/kg), while the rest of metals were at low concentration. The present study showed that E. alba L. is suitable for the control of environmental pollutants such as heavy metals, however, for medicinal purposes; it should be collected from those areas which are not contaminated with heavy metals. The purpose of the current study was to standardize various indigenous medicinal plants for heavy metals contamination and to make awareness among the public regarding its safer use and collection areas, containing high level of heavy metals and their adverse health affects. (author)

Effect of heavy metals ondecolorization of reactive brilliant red by newly isolated microorganisms

International Nuclear Information System (INIS)

Nosheen, S.; Arshad, M.

2011-01-01

This study involves aerobic decolorisation of reactive azo dye reactive brilliant red 2KBP by newly isolated microbial strains (two bacterial and one fungal strain) in presence of heavy metals including cobalt chloride, ferric chloride, zinc sulphate, copper sulphate and nickel chloride. Many heavy metals are necessary for microbial growth and are required in very small amounts however at higher levels they become toxic. So was the objective of present work to check the effect of concentration of heavy metals on the potential of microbial strains to decolorize azo dyes. All the heavy metals under consideration were added in range of 0.5 gl-1-2.5gl/sup -1/. All heavy metals showed inhibitory effect on decolorization capacity of bacterial as well as fungal strain .At optimum conditions bacterial strains named as B1 and B2 removed 84% and 78% while fungal strain decolorized 90.4% of dye. Cobalt and nickel showed greater inhibitors on% decolorization of dyes than Zinc and iron. Fungal strain showed greater negative effect. Heavy metals might affect enzyme activities and thus reducing removal of dye. (author)

Peroxide reduction by a metal-dependent catalase in Nostoc punctiforme (cyanobacteria).

Science.gov (United States)

Hudek, L; Torriero, A A J; Michalczyk, A A; Neilan, B A; Ackland, M L; Bräu, Lambert

2017-05-01

This study investigated the role of a novel metal-dependent catalase (Npun_R4582) that reduces hydrogen peroxide in the cyanobacterium Nostoc punctiforme. Quantitative real-time PCR showed that npun_R4582 relative mRNA levels were upregulated by over 16-fold in cells treated with either 2 μM added Co, 0.5 μM added Cu, 500 μM Mn, 1 μM Ni, or 18 μM Zn. For cells treated with 60 μM H 2 O 2 , no significant alteration in Npun_R4582 relative mRNA levels was detected, while in cells treated with Co, Cu, Mn, Ni, or Zn and 60 μM peroxide, relative mRNA levels were generally above control or peroxide only treated cells. Disruption or overexpression of npun_R4582 altered sensitivity to cells exposed to 60 μM H 2 O 2 and metals for treatments beyond the highest viable concentrations, or in a mixed metal solution for Npun_R4582 - cells. Moreover, overexpression of npun_R4582 increased cellular peroxidase activity in comparison with wild-type and Npun_R4582 - cells, and reduced peroxide levels by over 50%. The addition of cobalt, manganese, nickel, and zinc increased the capacity of Npun_R4582 to reduce the rate or total levels of peroxide produced by cells growing under photooxidative conditions. The work presented confirms the function of NpunR4582 as a catalase and provides insights as to how cells reduce potentially lethal peroxide levels produced by photosynthesis. The findings also show how trace elements play crucial roles as enzymatic cofactors and how the role of Npun_R4582 in hydrogen peroxide breakdown is dependent on the type of metal and the level available to cells.

Metals and Nicotine Level in Preparations of Rubisco Purified from Cuban Tobacco Varieties, for Chronic Renal Insufficiency Patients

International Nuclear Information System (INIS)

Geada, D.; Ares, D.; Del Castillo, N.; Valdes, R.; Gonzalez, M.; Rodriguez, D.; Ferro, W.; Gomez, L.; Padilla, S.; Roman, M. R.; Hidalgo, A.; Zamora, A.

2003-01-01

Full Text: Foods are the major source of metals accumulation in the humans. Plants contain large quantities of Rubisco to attain reasonable rates of photosynthesis, and thus, is the most abundant protein on Earth. Rubisco could be used as additive in nutrition for people with renal insufficiency, comatose state and severely restrict Na and K because the absence of these metals can greatly reduce the frequency of haemodialysis. Our purpose was to measure the metal levels and estimate the potential intake of copper, iron, zinc and manganese in patients under haemodialysis treatment and coma. Additionally we also studied sodium, potassium, calcium and magnesium quantities. Intakes of these metals were estimated, attending to the quantity of protein by person, from their daily diets and compared with the Provisional Tolerable Weekly Intakes (PTWI) as established by the FAO/WHO and the US Recommended Daily Allowances (RDA) or the US Safe and Adequate Daily Dietary Intakes (ESADDI). All the determinations of these metals were done using atomic absorption spectrometry and none of them exceeds PTWI, RDA and ESADDI values; nevertheless they were higher than the values previously obtained. The highest metal value, respect the daily allowances, was obtained for iron. Lowest values were reported for sodium, potassium and copper which support the protein use as a nutritional supplement. On the other hand, nicotine is a very harmful alkaloid in tobacco plants and the LD 50 oral is 40mg in humans. The nicotine contents were analyzed by gas chromatography and it does not exceed the 7ug/ml

Variation in levels and removal efficiency of heavy and trace metals ...

African Journals Online (AJOL)

The general abundance distribution pattern for metals was Zn > Cu > Pb > Cr > Ni > As > Co > Cd > Hg. The removal efficiency ranged from 1.5% for Hg at Zandvliet WWTP plant during winter to 98.27% for Cu at Athlone WWTP treatment plant during summer. The final effluent concentration for most of the metals were within ...

Assessment of complex water pollution with heavy metals and Pyrethroid pesticides on transcript levels of metallothionein and immune related genes.

Science.gov (United States)

Ghazy, Haneen A; Abdel-Razek, Mohamed A S; El Nahas, Abeer F; Mahmoud, Shawky

2017-09-01

Alteration of immunological function of an aquatic organism can be used as an indicator for evaluating the direct effect of exposure to pollutants. The aim of this work is to assess the impact of complex water pollution with special reference to Pyrethroid pesticides and heavy metals on mRNA transcript levels of Metallothionine and some immune related genes of Nile tilapia (Oreochromas Niloticus). Residues of six heavy metals and six Pyrethroid were assessed in water as well as fish tissues at three different sites of Lake Burullus, located at Northern Egypt. Variations of water physicochemical properties associated with different levels of heavy metals at the three different sections were recorded. Tissue residues of Fe, Mn and Zn, Cu, Ni exceed water levels in contrast to elevated water level of Pb. All assessed Pyrethroids are detected in fish tissue samples with higher concentration (3-42 folds) than that found in water samples especially Cypermethrin. Significant down-regulation of expression levels of metallothionein (MT) at the three sections of the lake was observed. The expression of immune related genes (IgM) and inflammatory cytokines (TNF, IL.8 and IL.1) were affected. IgM and TNF were significantly down-regulated at eastern and western section of the lake; meanwhile the expression of IL8 is down regulated at the three sections of the lack. IL1 was significantly up-regulated at eastern and middle sections. We conclude that, variable gene expression of MT and immune-related genes at the three sections of the lack impose different response to complex water pollution in relation to variable aquatic environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Performance modeling of concrete/metal barriers used in low-level waste disposal

International Nuclear Information System (INIS)

Shuman, R.; Chau, Nam; Icenhour, A.S.; Godbee, H.W.; Tharp, M.L.

1993-01-01

Low-Level radioactive wastes generated in government and commercial operations involving nuclear materials need to be isolated from the environment almost in perpetuity. An increasing number of disposal sites are using concrete/metal barriers (so called ''engineered'' barriers) to isolate these wastes from the environment. Two major concerns hamper the use of engineered barriers; namely, the lack of ability to reliably predict the service life of these barriers and to estimate the confidence level of the service life predicted. Computer codes (SOURCE1 and SOURCE2) for estimating the long-term (centuries to millennia) service life of these barriers are presented. These codes use mathematical models (based on past observations, currently accepted data, and established theories) to predict behavior into the future. Processes modeled for concrete degradation include sulfate attack, calcium hydroxide leaching, and reinforcement corrosion. The loss of structural integrity due to cracking is also modeled. Mechanisms modeled for nuclide leaching include advection and diffusion. The coupled or linked effects of these models are addressed in the codes. Outputs from the codes are presented and analyzed

Bioinspired metal-cell wall-metal sandwich structure on an individual bacterial cell scaffold.

Science.gov (United States)

Zhang, Xiaoliang; Yu, Mei; Liu, Jianhua; Li, Songmei

2012-08-25

Pd nanoparticles were introduced to individual Bacillus cells and dispersedly anchored on both the inside and outside of the cell walls. The anchored nanoparticles served as "seeds" to drive the formation of double metallic layers forming a metal-cell wall-metal sandwich structure at the single-cell level.

Electron spectroscopy in the X-ray range for occupied and free levels and the application to transition metal silicides

International Nuclear Information System (INIS)

Speier, W.

1988-03-01

Intermetallic compounds of transition metals are investigated by means of XPS, Bremsstrahlung Isochromate Spectroscopy and XAS. Occupied and free levels are characterized and moreover a systematic overview over the electronic structure of the transition element silicides is given. (BHO)

Metal decontamination for waste minimization using liquid metal refining technology

International Nuclear Information System (INIS)

Joyce, E.L. Jr.; Lally, B.; Ozturk, B.; Fruehan, R.J.

1993-01-01

The current Department of Energy Mixed Waste Treatment Project flowsheet indicates that no conventional technology, other than surface decontamination, exists for metal processing. Current Department of Energy guidelines require retrievable storage of all metallic wastes containing transuranic elements above a certain concentration. This project is in support of the National Mixed Low Level Waste Treatment Program. Because of the high cost of disposal, it is important to develop an effective decontamination and volume reduction method for low-level contaminated metals. It is important to be able to decontaminate complex shapes where surfaces are hidden or inaccessible to surface decontamination processes and destruction of organic contamination. These goals can be achieved by adapting commercial metal refining processes to handle radioactive and organic contaminated metal. The radioactive components are concentrated in the slag, which is subsequently vitrified; hazardous organics are destroyed by the intense heat of the bath. The metal, after having been melted and purified, could be recycled for use within the DOE complex. In this project, we evaluated current state-of-the-art technologies for metal refining, with special reference to the removal of radioactive contaminants and the destruction of hazardous organics. This evaluation was based on literature reports, industrial experience, plant visits, thermodynamic calculations, and engineering aspects of the various processes. The key issues addressed included radioactive partitioning between the metal and slag phases, minimization of secondary wastes, operability of the process subject to widely varying feed chemistry, and the ability to seal the candidate process to prevent the release of hazardous species

Analysis of heavy metal lead (Pb) levels with Aas in cow's milk by giving cumin (Cuminum cyminum L.), white turmeric (Curcuma zedoaria Rosc.) and mango turmeric (Curcuma mangga Val.).

Science.gov (United States)

Nurdin, E; Putra, D P; Amelia, T

2013-11-01

The aim of this study was to determine the effect of giving Cumin (Cuminum cyminum L.), White Turmeric (Curcuma zedoaria Rosc.) and Mango Turmeric (Curcuma mango Val.) on levels of heavy metals lead (Pb) in cow's milk produced. The study was conducted in West Java with experimental method in 16 Fries Holland dairy cows with lactation period of 2-4 months and lactation months of 3-4 months. The design used is simple randomized design with 4 treatments such as Group A (control/no treatment), Group B (Cumin 0.03% body weight), Group C (White Turmeric 0.02% body weight) and Group D (Mango Turmeric 0.06% body weight). Measurement of Pb levels in milk using the method of wet destruction, while Pb measurements on faeces using wet ashing method, by means of Atomic Absorption Spectrophotometry. Based on the researsch results showed that administration of Cumin, White Turmeric and Mango Turmeric have very real effect on reducing levels of heavy metals lead (Pb) in cow's milk produced, with a consecutive decrease 98.36, 99.33 and 99.37% and the very real effect on elevated levels of Pb in faeces by 68.01, 64.52 and 80.54%. Mango Turmeric is the best treatment of three treatment in decreasing lead level in milk.

Certain antioxidant enzymes of Allium cepa as biomarkers for the detection of toxic heavy metals in wastewater

International Nuclear Information System (INIS)

Fatima, Riffat A.; Ahmad, Masood

2005-01-01

The utility of antioxidant enzymes, viz glutathione-S-transferase (GST), glutathione reductase (GR), superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), glutathione peroxidase (GPX), monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR), as biomarkers of heavy metal pollution in water was investigated using the Allium cepa (onion) system. These antioxidant enzymes were assayed in onion bulbs exposed to certain heavy metals taken separately, the test metals taken in combination as well as the industrial wastewater especially found to contain these metals. GST exhibited significantly enhanced activity upon treatment with individual heavy metals. However, GR, SOD and CAT did not show such a pronounced increase in activities. At higher heavy metal concentrations, GR, SOD and CAT showed a steep decline while GST activity still showed a rise. Moreover, APX, GPX and MDHAR also exhibited remarkable induction with increase in the concentration of individual heavy metals. However, there was no significant change in DHAR activity with respect to the controls. Metabolites like ascorbate (ASC) and glutathione (GSH) exhibited significant decline with increase in the concentration of individual heavy metals while the level of H 2 O 2 continued to display the rise up to a heavy metal concentration of 100 μM, after which it showed a gradual decline. A. cepa bulbs treated with wastewater sample showed enzyme activity profiles similar to that shown with heavy metals, thereby suggesting the presence of heavy metals in the test wastewater. Atomic absorption spectrophotometry also detected large amounts of Cd, Cr, Cu, Hg, Pb and Zn in the test water sample. The metal mixture, containing the amounts of heavy metals equivalent to those found in the wastewater, resulted in steep declines in GR, SOD and CAT activities in A. cepa while GST showed a rise. However, when this metal mixture was diluted to 2000-fold, GR, SOD and CAT also showed enhanced

Growth, composition and metal removal potential of a Phormidium bigranulatum-dominated mat at elevated levels of cadmium

Energy Technology Data Exchange (ETDEWEB)

Kumar, Dhananjay [Plant Molecular Biology and Plant Physiology Lab, Lab no. 114, School of Life Sciences, Jawaharlal Nehru University, New Delhi 110 067 (India); Yadav, Arpana [Laboratory of Algal Biology, Department of Botany, Banaras Hindu University, Varanasi 221 005 (India); Gaur, J.P., E-mail: gaurjp@yahoo.co.in [Laboratory of Algal Biology, Department of Botany, Banaras Hindu University, Varanasi 221 005 (India)

2012-07-15

Prompted by the fact that interaction of metals with cyanobacterial mats has been little studied, the present study evaluates the response of a cyanobacterial mat, dominated by Phormidium bigranulatum, to elevated concentrations of Cd{sup 2+} in the medium. The mat failed to grow at 7 {mu}M of Cd{sup 2+} when the metal as also the mat inoculum were simultaneously added to the medium right in the beginning of the experiment due to marked sensitivity of P. bigranulatum, the main constituent of the mat, to high concentrations of Cd{sup 2+}. However, the mat previously grown in Cd{sup 2+}-free medium for a time period of 1-4 weeks grew successfully when exposed to media containing very high concentrations of Cd{sup 2+}. Four-week-old mat could grow at 250 {mu}M of Cd{sup 2+}, which has been found toxic to many cyanobacteria and algae by previous researchers. Greater tolerance of older mats to Cd{sup 2+} may be due to greater proportion of exopolysaccharides, which are well known to sequester metal ions extracellularly, in them. Whereas the relative proportion of P. bigranulatum declined at high concentrations of the test metal that of green algae increased due most likely to their tolerance to Cd{sup 2+}. Air bubbles were seen entrapped in the mat due obviously to photosynthetic activity. Elevated concentrations of Cd{sup 2+} reduced the number of air bubbles in the mat. Decline in number of air bubbles at high concentrations of metal ions was more prominent in the case of younger mat than in the older one. The present study also evaluated changes in species composition of mats of different age that were subsequently grown in Cd{sup 2+} enriched culture medium. Younger mats showed change in species composition at very low concentrations of Cd{sup 2+}, but older mats showed little changes even at very high concentrations of the test metal. Hence older mats more strongly resisted to changes in its species composition than the younger ones upon exposure to high

Statistical Analysis Of Heavy Metals Concentration In Watermelon Plants Irrigated By Wastewater

Science.gov (United States)

Khanjani, M. J.; Maghsoudi moud, A. A.; Saffari, V. R.; Hashamipor, S. M.; Soltanizadeh, M.

2008-01-01

Concentration of heavy metals in vegetables irrigated by urban wastewater is a cause of serious concern due to the potentials health problems of consuming contaminated produce. In this study it is tried to model the concentration of heavy metals (Cd, Cr, Cu, Fe,…) as a function of their concentration in watermelon roots and stems. Our study shows there is a good relationship between them for most of collected data. By measuring the concentration in root and stem of watermelon plant samples before harvesting, the concentration of heavy metal in watermelon's fruit can be estimated by presented mathematical models. This study shows the concentrations of heavy metals in fruits, roots and stems of watermelon plants are very high and in dangerous level when irrigated by municipal waste water.

Urbanization increased metal levels in lake surface sediment and catchment topsoil of waterscape parks

Energy Technology Data Exchange (ETDEWEB)

Li, Hong-Bo [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Yu, Shen, E-mail: syu@iue.ac.cn [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Li, Gui-Lin [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Liu, Yi; Yu, Guang-Bin [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Deng, Hong [Department of Environmental Sciences, Tiantong National Station of Forest Ecosystem, Key Laboratory of Urbanization and Ecological Restoration, East China Normal University, Shanghai 200062 (China); Wu, Sheng-Chun [State Key Laboratory in Marine Pollution, Biology and Chemistry Department, City University of Hong Kong, Hong Kong (China); Wong, Ming-Hung [Croucher Institute for Environmental Sciences, Hong Kong Baptist University, Hong Kong (China)

2012-08-15

Lake surface sediment is mainly derived from topsoil in its catchment. We hypothesized that distribution of anthropogenic metals would be homogenous in lake surface sediment and the lake's catchment topsoil. Anthropogenic metal distributions (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) in fourteen waterscape parks were investigated in surface sediments and catchment topsoils and possible source homogeneity was tested using stable Pb isotopic ratio analysis. The parks were located along an urbanization gradient consisting of suburban (SU), developing urban (DIU), developed urban (DDU), and central urban core (CUC) areas in Shanghai, China. Results indicated that surface lake sediments and catchment topsoils in the CUC parks were highly contaminated by the investigated anthropogenic metals. Total metal contents in surface sediment and topsoil gradually increased along the urbanization gradient from the SU to CUC areas. Generally, the surface sediments had greater total metal contents than their catchment topsoils. These results suggest that urbanization drives the anthropogenic metal enrichment in both surface sediment and its catchment topsoil in the waterscape parks. Soil fine particles (< 63 {mu}m) and surface sediments had similar enrichment ratios of metals, suggesting that surface runoff might act as a carrier for metals transporting from catchment to lake. Stable Pb isotope ratio analysis revealed that the major anthropogenic Pb source in surface sediment was coal combustion as in the catchment topsoil. Urbanization also correlated with chemical fractionation of metals in both surface sediment and catchment topsoil. From the SU to the CUC parks, amounts of labile metal fractions increased while the residual fraction of those metals remained rather constant. In short, urbanization in Shanghai drives anthropogenic metal distribution in environmental matrices and the sources were homogenous. -- Highlights: Black-Right-Pointing-Pointer Obvious

Urbanization increased metal levels in lake surface sediment and catchment topsoil of waterscape parks

International Nuclear Information System (INIS)

Li, Hong-Bo; Yu, Shen; Li, Gui-Lin; Liu, Yi; Yu, Guang-Bin; Deng, Hong; Wu, Sheng-Chun; Wong, Ming-Hung

2012-01-01

Lake surface sediment is mainly derived from topsoil in its catchment. We hypothesized that distribution of anthropogenic metals would be homogenous in lake surface sediment and the lake's catchment topsoil. Anthropogenic metal distributions (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) in fourteen waterscape parks were investigated in surface sediments and catchment topsoils and possible source homogeneity was tested using stable Pb isotopic ratio analysis. The parks were located along an urbanization gradient consisting of suburban (SU), developing urban (DIU), developed urban (DDU), and central urban core (CUC) areas in Shanghai, China. Results indicated that surface lake sediments and catchment topsoils in the CUC parks were highly contaminated by the investigated anthropogenic metals. Total metal contents in surface sediment and topsoil gradually increased along the urbanization gradient from the SU to CUC areas. Generally, the surface sediments had greater total metal contents than their catchment topsoils. These results suggest that urbanization drives the anthropogenic metal enrichment in both surface sediment and its catchment topsoil in the waterscape parks. Soil fine particles (< 63 μm) and surface sediments had similar enrichment ratios of metals, suggesting that surface runoff might act as a carrier for metals transporting from catchment to lake. Stable Pb isotope ratio analysis revealed that the major anthropogenic Pb source in surface sediment was coal combustion as in the catchment topsoil. Urbanization also correlated with chemical fractionation of metals in both surface sediment and catchment topsoil. From the SU to the CUC parks, amounts of labile metal fractions increased while the residual fraction of those metals remained rather constant. In short, urbanization in Shanghai drives anthropogenic metal distribution in environmental matrices and the sources were homogenous. -- Highlights: ► Obvious urbanization effect on metal

Pollution Characteristics and Health Risk Assessment of Airborne Heavy Metals Collected from Beijing Bus Stations.

Science.gov (United States)

Zheng, Xiaoxia; Zhao, Wenji; Yan, Xing; Shu, Tongtong; Xiong, Qiulin; Chen, Fantao

2015-08-17

Airborne dust, which contains high levels of toxic metals, is recognized as one of the most harmful environment component. The purpose of this study was to evaluate heavy metals pollution in dustfall from bus stations in Beijing, and to perform a risk assessment analysis for adult passengers. The concentrations of Cd, Co, Cr, Cu, Mo, Ni, Pb, V and Zn were determined by inductively coupled plasma mass spectroscopy (ICP-MS). The spatial distribution, pollution level and potential health risk of heavy metals were analyzed by Geographic Information System (GIS) mapping technology, geo-accumulation index and health risk assessment model, respectively. The results indicate that dust samples have elevated metal concentrations, especially for Cd, Cu, Pb and Zn. The nine metals can be divided into two categories in terms of spatial distribution and pollution level. Cd, Cr, Cu, Mo, Pb and Zn reach contaminated level and have similar spatial patterns with hotspots distributed within the Fifth Ring Road. While the hot spot areas of Co and V are always out of the Fifth Ring Road. Health risk assessment shows that both carcinogenic and non-carcinogenic risks of selected metals were within the safe range.

Pollution Characteristics and Health Risk Assessment of Airborne Heavy Metals Collected from Beijing Bus Stations

Directory of Open Access Journals (Sweden)

Xiaoxia Zheng

2015-08-01

Full Text Available Airborne dust, which contains high levels of toxic metals, is recognized as one of the most harmful environment component. The purpose of this study was to evaluate heavy metals pollution in dustfall from bus stations in Beijing, and to perform a risk assessment analysis for adult passengers. The concentrations of Cd, Co, Cr, Cu, Mo, Ni, Pb, V and Zn were determined by inductively coupled plasma mass spectroscopy (ICP-MS. The spatial distribution, pollution level and potential health risk of heavy metals were analyzed by Geographic Information System (GIS mapping technology, geo-accumulation index and health risk assessment model, respectively. The results indicate that dust samples have elevated metal concentrations, especially for Cd, Cu, Pb and Zn. The nine metals can be divided into two categories in terms of spatial distribution and pollution level. Cd, Cr, Cu, Mo, Pb and Zn reach contaminated level and have similar spatial patterns with hotspots distributed within the Fifth Ring Road. While the hot spot areas of Co and V are always out of the Fifth Ring Road. Health risk assessment shows that both carcinogenic and non-carcinogenic risks of selected metals were within the safe range.

Assessing soil heavy metal pollution in the water-level-fluctuation zone of the Three Gorges Reservoir, China.

Science.gov (United States)

Ye, Chen; Li, Siyue; Zhang, Yulong; Zhang, Quanfa

2011-07-15

The water-level-fluctuation zone (WLFZ) between the elevations of 145-175 m in China's Three Gorges Reservoir has experienced a novel hydrological regime with half a year (May-September) exposed in summer and another half (October-April) submerged in winter. In September 2008 (before submergence) and June 2009 (after submergence), soil samples were collected in 12 sites in the WLFZ and heavy metals (Hg, As, Cr, Cd, Pb, Cu, Zn, Fe, and Mn) were determined. Enrichment factor (EF), factor analysis (FA), and factor analysis-multiple linear regression (FA-MLR) were employed for heavy metal pollution assessment, source identification, and source apportionment, respectively. Results demonstrate spatial variability in heavy metals before and after submergence and elements of As, Cd, Pb, Cu, and Zn are higher in the upper and low reaches. FA and FA-MLR reveal that As and Cd are the primary pollutants before submergence, and over 45% of As originates from domestic sewage and 59% of Cd from industrial wastes. After submergence, the major contaminants are Hg, Cd, and Pb, and traffic exhaust contributes approximately 81% to Hg and industrial effluent accounts about 36% and 73% for Cd and Pb, respectively. Our results suggest that increased shipping and industrial wastes have deposited large amounts of heavy metals which have been accumulated in the WLFZ during submergence period. Copyright © 2011 Elsevier B.V. All rights reserved.

Naturally-assisted metal phytoextraction by Brassica carinata: Role ofroot exudates

Energy Technology Data Exchange (ETDEWEB)

Quartacci, Mike F., E-mail: mfquart@agr.unipi.i [Dipartimento di Chimica e Biotecnologie Agrarie, Universita di Pisa, Via del Borghetto 80, 56124 Pisa (Italy); Irtelli, Barbara [Dipartimento di Chimica e Biotecnologie Agrarie, Universita di Pisa, Via del Borghetto 80, 56124 Pisa (Italy); Gonnelli, Cristina; Gabbrielli, Roberto [Dipartimento di Biologia Vegetale, Sezione di Ecologia e Fisiologia Vegetale, Universita di Firenze, Via Micheli 1, 50121 Firenze (Italy); Navari-Izzo, Flavia [Dipartimento di Chimica e Biotecnologie Agrarie, Universita di Pisa, Via del Borghetto 80, 56124 Pisa (Italy)

2009-10-15

Due to relatively high chelant dosages and potential environmental risks it is necessary to explore different approaches in the remediation of metal-contaminated soils. The present study focussed on the removal of metals (As, Cd, Cu, Pb and Zn) from a multiple metal-contaminated soil by growing Brassica carinata plants in succession to spontaneous metallicolous populations of Pinus pinaster, Plantago lanceolata and Silene paradoxa. The results showed that the growth of the metallicolous populations increased the extractable metal levels in the soil, which resulted in a higher accumulation of metals in the above-ground parts of B. carinata. Root exudates of the three metallicolous species were analysed to elucidate their possible role in the enhanced metal availability. The presence of metals stimulated the exudation of organic and phenolic acids as well as flavonoids. It was suggested that root exudates played an important role in solubilising metals in soil and in favouring their uptake by roots. - Phytoextraction of metals is enhanced in Brassica carinata grown in succession to metallicolous populations of spontaneous species.

Naturally-assisted metal phytoextraction by Brassica carinata: Role ofroot exudates

International Nuclear Information System (INIS)

Quartacci, Mike F.; Irtelli, Barbara; Gonnelli, Cristina; Gabbrielli, Roberto; Navari-Izzo, Flavia

2009-01-01

Due to relatively high chelant dosages and potential environmental risks it is necessary to explore different approaches in the remediation of metal-contaminated soils. The present study focussed on the removal of metals (As, Cd, Cu, Pb and Zn) from a multiple metal-contaminated soil by growing Brassica carinata plants in succession to spontaneous metallicolous populations of Pinus pinaster, Plantago lanceolata and Silene paradoxa. The results showed that the growth of the metallicolous populations increased the extractable metal levels in the soil, which resulted in a higher accumulation of metals in the above-ground parts of B. carinata. Root exudates of the three metallicolous species were analysed to elucidate their possible role in the enhanced metal availability. The presence of metals stimulated the exudation of organic and phenolic acids as well as flavonoids. It was suggested that root exudates played an important role in solubilising metals in soil and in favouring their uptake by roots. - Phytoextraction of metals is enhanced in Brassica carinata grown in succession to metallicolous populations of spontaneous species.

Visualizing Metal Content and Intracellular Distribution in Primary Hippocampal Neurons with Synchrotron X-Ray Fluorescence.

Directory of Open Access Journals (Sweden)

Robert A Colvin

Full Text Available Increasing evidence suggests that metal dyshomeostasis plays an important role in human neurodegenerative diseases. Although distinctive metal distributions are described for mature hippocampus and cortex, much less is known about metal levels and intracellular distribution in individual hippocampal neuronal somata. To solve this problem, we conducted quantitative metal analyses utilizing synchrotron radiation X-Ray fluorescence on frozen hydrated primary cultured neurons derived from rat embryonic cortex (CTX and two regions of the hippocampus: dentate gyrus (DG and CA1. Comparing average metal contents showed that the most abundant metals were calcium, iron, and zinc, whereas metals such as copper and manganese were less than 10% of zinc. Average metal contents were generally similar when compared across neurons cultured from CTX, DG, and CA1, except for manganese that was larger in CA1. However, each metal showed a characteristic spatial distribution in individual neuronal somata. Zinc was uniformly distributed throughout the cytosol, with no evidence for the existence of previously identified zinc-enriched organelles, zincosomes. Calcium showed a peri-nuclear distribution consistent with accumulation in endoplasmic reticulum and/or mitochondria. Iron showed 2-3 distinct highly concentrated puncta only in peri-nuclear locations. Notwithstanding the small sample size, these analyses demonstrate that primary cultured neurons show characteristic metal signatures. The iron puncta probably represent iron-accumulating organelles, siderosomes. Thus, the metal distributions observed in mature brain structures are likely the result of both intrinsic neuronal factors that control cellular metal content and extrinsic factors related to the synaptic organization, function, and contacts formed and maintained in each region.

Synergistic influence of phosphorylation and metal ions on tau oligomer formation and coaggregation with α-synuclein at the single molecule level

Directory of Open Access Journals (Sweden)

Nübling Georg

2012-07-01

Full Text Available Abstract Background Fibrillar amyloid-like deposits and co-deposits of tau and α-synuclein are found in several common neurodegenerative diseases. Recent evidence indicates that small oligomers are the most relevant toxic aggregate species. While tau fibril formation is well-characterized, factors influencing tau oligomerization and molecular interactions of tau and α-synuclein are not well understood. Results We used a novel approach applying confocal single-particle fluorescence to investigate the influence of tau phosphorylation and metal ions on tau oligomer formation and its coaggregation with α-synuclein at the level of individual oligomers. We show that Al3+ at physiologically relevant concentrations and tau phosphorylation by GSK-3β exert synergistic effects on the formation of a distinct SDS-resistant tau oligomer species even at nanomolar protein concentration. Moreover, tau phosphorylation and Al3+ as well as Fe3+ enhanced both formation of mixed oligomers and recruitment of α-synuclein in pre-formed tau oligomers. Conclusions Our findings provide a new perspective on interactions of tau phosphorylation, metal ions, and the formation of potentially toxic oligomer species, and elucidate molecular crosstalks between different aggregation pathways involved in neurodegeneration.

How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells.

Science.gov (United States)

Guerrero, Antonio; Marchesi, Luís F; Boix, Pablo P; Ruiz-Raga, Sonia; Ripolles-Sanchis, Teresa; Garcia-Belmonte, Germà; Bisquert, Juan

2012-04-24

Electronic equilibration at the metal-organic interface, leading to equalization of the Fermi levels, is a key process in organic optoelectronic devices. How the energy levels are set across the interface determines carrier extraction at the contact and also limits the achievable open-circuit voltage under illumination. Here, we report an extensive investigation of the cathode energy equilibration of organic bulk-heterojunction solar cells. We show that the potential to balance the mismatch between the cathode metal and the organic layer Fermi levels is divided into two contributions: spatially extended band bending in the organic bulk and voltage drop at the interface dipole layer caused by a net charge transfer. We scan the operation of the cathode under a varied set of conditions, using metals of different work functions in the range of ∼2 eV, different fullerene acceptors, and several cathode interlayers. The measurements allow us to locate the charge-neutrality level within the interface density of sates and calculate the corresponding dipole layer strength. The dipole layer withstands a large part of the total Fermi level mismatch when the polymer:fullerene blend ratio approaches ∼1:1, producing the practical alignment between the metal Fermi level and the charge-neutrality level. Origin of the interface states is linked with fullerene reduced molecules covering the metal contact. The dipole contribution, and consequently the band bending, is highly sensitive to the nature and amount of fullerene molecules forming the interface density of states. Our analysis provides a detailed picture of the evolution of the potentials in the bulk and the interface of the solar cell when forward voltage is applied or when photogeneration takes place.

[Concentrations and pollution assessment of soil heavy metals at different water-level altitudes in the draw-down areas of the Three Gorges Reservoir].

Science.gov (United States)

Wang, Ye-Chun; Lei, Bo; Yang, San-Ming; Zhang, Sheng

2012-02-01

To investigate the effect of 175 m trial impounding (2008 and 2009) of the Three Gorges Reservoir on soil heavy metals, three draw-down areas with similar geological environment and history of land-use in Zhongxian County were chosen. Altogether 36 surface soil samples (including 0-10 cm and 10-20 cm soil layer) from water-level altitude of 160 m and 170 m were obtained, and their heavy metals concentrations (As, Cd, Cr, Cu, Ni, Pb and Zn) were measured by the X-ray fluorescence spectrometric method. Geoaccumulation index (I(geo)) and Håkanson potential ecological risk index were applied to assess the heavy metals pollution status and potential ecological risk, respectively. Results indicated that although the inundation period of 160 m was 224 d longer than that of 170 m, significant difference in concentrations of heavy metals were not found between the two water-level altitudes. Except for Cd, most of the heavy metals highly related with each other positively. According to the geoaccumulation index, the pollution extent of the heavy metals followed the order: As > Cd > Cu > Ni > Zn = Pb > Cr. The I(geo) value of As, Cd and Cu were 0.45, 0.39 and 0.06, respectively, indicating that the soil was only lightly polluted by these heavy metals. Håkanson single potential ecological risk index followed the order: Cd > As > Cu > Pb > Ni > Cr > Zn. Cd with E(i) values of 59.10, had a medium potential for ecological risk,while As, Cr, Cu, Pb, Ni and Zn only had a light potential. Consequently, although As, Cd and Cu were the major heavy metals with potential ecological risk for surface soil pollution in the draw-down areas in Zhongxian County, the Three Gorges Reservoir.

Influence of mineralogical and heavy metal composition on natural radionuclide concentrations in the river sediments

International Nuclear Information System (INIS)

Suresh, G.; Ramasamy, V.; Meenakshisundaram, V.; Venkatachalapathy, R.; Ponnusamy, V.

2011-01-01

The natural radiation level has been determined for the sediment samples of the Ponnaiyar River with an aim of evaluating the radiation hazard. The mineralogical characterizations of the sediments have been carried out using the Fourier Transform Infrared (FTIR) spectroscopic technique. The relative distribution of major minerals is determined by calculating extinction coefficient. The concentration and spatial distribution of heavy metals (Pb, Cr, Cu, Zn and Ni) have been studied to understand the heavy metal contamination and its level of toxicity. To evaluate the potential toxicity, heavy metal concentrations are compared with different toxicological and geological reference values. The comparison results suggest that the present metals create an adverse effect on the aquatic ecosystems associated with this river. To assess the sediment contamination due to the studied heavy metals, the Pollution Load Index (PLI) is calculated. Multivariate Statistical analyses (Pearson Correlation, Cluster and Factor analysis) were carried out between the parameters obtained from radioactivity, mineralogical and geochemical analysis to know the existing relations. Obtained results showed that the effect of mineralogy on level of radioactivity should be significant. However, mineralogy effect on heavy metal composition in the sediments should be limited, indicating that other factors such as vicinity of the pollution sources are more important. Also, the influence of mineralogical characterization on level of radioactivity is significant, whereas the influence of the heavy metal composition on level of radioactivity should be limited. - Highlights: →Sediments radioactivity, mineralogical and heavy metal characterization have been analyzed. → Absorbed dose rate, PLI and kaolinite increase towards the river mouth. → Influence of minerals and heavy metals on level of radioactivity is assessed.