WorldWideScience

Sample records for metal ion complexes

  1. Metal Ion Selectivity of Kojate Complexes: A Theoretical Study

    Directory of Open Access Journals (Sweden)

    Sarita Singh

    2013-01-01

    Full Text Available Density functional calculations have been performed on four-coordinate kojate complexes of selected divalent metal ions in order to determine the affinity of the metal ions for the kojate ion. The complexation reactions are characterized by high energies, showing that they are highly exothermic. It is found that Ni(II exhibits the highest affinity for the kojate ion, and this is attributed to the largest amount of charge transfer from the ligand to the metal ion. The Ni(II complex has distorted square planar structure. The HOMOs and LUMOs of the complexes are also discussed. All complexes display a strong band at ~1500 cm−1 corresponding to the stretching frequency of the weakened carbonyl bond. Comparison of the complexation energies for the two steps shows that most of the complexation energy is realized in the first step. The energy released in the second step is about one-third that of the first step.

  2. Extraction of complexes of metal ions with pyridine oxyazo compounds

    International Nuclear Information System (INIS)

    Lobanov, F.I.; Nurtaeva, G.K.; Ergozhin, E.E.

    1983-01-01

    Modern state and prospects of the development of investigas tions in the field of extraction of complexes of metal ions (V, In, Cd, Nb, REE, RU, Ta, U, Zr and others) with pyridine oxyazo compoUnds are analyzed. Application of pyridine oxyazo compounds as extraction-photometric reagents is described. Basic methods of oxyazo compounds preparation are considered along with reagent properties and physical-chemical characteristics. Flow diagrams of ion extraction are presented for the above metals. Mechanisms of complexing reactions for metal ions with pyridine oxyazo compounds and stability of forming complexes are considered in detail. Concrete methods of extraction-photometric separation and element determination permitting to find simultaneously several metal ions with similar properties in the case of their joint presence are described

  3. fusion on metal ion complexation of porphycene

    Indian Academy of Sciences (India)

    Complexation of −′ fused -extended porphycene, namely dinaphthoporphycene was carried out successfully with copper(II) and its solid state structure shows a square-type planar N4-coordination core. The photophysical and electrochemical properties of this complex, along with the nickel(II) complex were also ...

  4. Dimeric Complexes of Tryptophan with M2+ Metal Ions

    NARCIS (Netherlands)

    Dunbar, R. C.; Steill, J. D.; Polfer, N. C.; Oomens, J.

    2009-01-01

    IRMPD spectroscopy using the FELIX free electron laser and a Fourier transform ICR mass spectrometer was used to characterize the structures of electrosprayed dimer complexes M(2+)Trp(2) of tryptophan with a series of eight doubly charged metal ions, including alkaline earths Ca, Sr, and Ba, and

  5. Functionalization of protein crystals with metal ions, complexes and nanoparticles.

    Science.gov (United States)

    Abe, Satoshi; Maity, Basudev; Ueno, Takafumi

    2018-04-01

    Self-assembled proteins have specific functions in biology. With inspiration provided by natural protein systems, several artificial protein assemblies have been constructed via site-specific mutations or metal coordination, which have important applications in catalysis, material and bio-supramolecular chemistry. Similar to natural protein assemblies, protein crystals have been recognized as protein assemblies formed of densely-packed monomeric proteins. Protein crystals can be functionalized with metal ions, metal complexes or nanoparticles via soaking, co-crystallization, creating new metal binding sites by site-specific mutations. The field of protein crystal engineering with metal coordination is relatively new and has gained considerable attention for developing solid biomaterials as well as structural investigations of enzymatic reactions, growth of nanoparticles and catalysis. This review highlights recent and significant research on functionalization of protein crystals with metal coordination and future prospects. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. [Applications of metal ions and their complexes in medicine I].

    Science.gov (United States)

    Nagy, László; Csintalan, Gabriella; Kálmán, Eszter; Sipos, Pál; Szvetnik, Attila

    2003-01-01

    The "inorganic medical chemistry" is a rapidly developing field with enormous potential for applications, which offers new possibilities to the pharmaceutical industry. For example, the titanocene dichloride is already in clinical use, and antimetastatic activity of a range of Ru(III) complexes is also well established. There are ways to minimize the toxicity of Gd(III) complexes and therefore they can be safely injected as MRI contrast agents. The so called "ligand design" allows paramagnetic ions to be targeted to specific organs. Such designed ligands also enable the targeting of radiodiagnostic (99mTc) and radiotherapeutic (186Re) isotopes. There is a significant progress in understanding the coordination chemistry and biochemistry of metal ion(s) containing complexes such as Au antiarthritic and Bi antiulcer drugs. Further, currently developing areas include Mn (SOD mimics), V (insulin mimics), Ru (NO scavengers), Ln-based photosensitizers, metal-targeted organic agents and the Fe overload. The expanding knowledge of the role of metals in biochemistry is expected to provide scope for the design of new drugs in many other areas too, for example neuropharmaceutical and antiaffective agents. Progress in coordination chemistry is strongly dependent on understanding not only the thermodynamics of reactions, but also the kinetics of metal complexes under biologically relevant conditions.

  7. Sorption of heavy metal ions on new metal-ligand complexes chemically derived from Lycopodium clavatum

    Energy Technology Data Exchange (ETDEWEB)

    Pehlivan, E.; Ersoz, M.; Yildiz, S. [Univ. of Selcuk, Konya (Turkey); Duncan, H.J. [Univ. of Glasgow, Scotland (United Kingdom)

    1994-08-01

    Sorption of heavy metal ions from aqueous solution has been investigated as a function of pH using a novel exchanger system whereby Lycopodium clavatum is functionalized with carboxylate and glyoxime metal-ligand complexes. The new ligand exchangers were prepared using a reaction of diaminosporopollenin with various metal-ligand complexes of glyoxime and monocarboxylic acid. The sorptive behavior of these metal-ligand exchangers and the possibilities to remove and to recover selectively heavy metal cations using these systems are discussed on the basis of their chemical natures and their complexing properties.

  8. The Effect of Complex Formation upon the Redox Potentials of Metallic Ions. Cyclic Voltammetry Experiments.

    Science.gov (United States)

    Ibanez, Jorge G.; And Others

    1988-01-01

    Describes experiments in which students prepare in situ soluble complexes of metal ions with different ligands and observe and estimate the change in formal potential that the ion undergoes upon complexation. Discusses student formation and analysis of soluble complexes of two different metal ions with the same ligand. (CW)

  9. Complexation ion-exchange chromatography of some metal ions on papers impregnated with Ti(IV)-based inorganic ion exchangers.

    Science.gov (United States)

    Sharma, S D; Gupta, R

    2000-02-01

    The chromatographic behavior of 40 metal ions is studied on titanium (IV) arsenate, titanium (IV) phosphate-, titanium (IV) molybdate-, titanium(IV) tungstate-, and titanium(IV) selenite-impregnated papers in 0.1M oxalic, citric, and tartaric acid as mobile phases. Similar studies are carried out on Whatman No. 1 papers for comparison. The ion-exchange capacity of these papers is determined, and their selectivity for different cations is discussed. The mechanism of migration is explained in terms of ion-exchange, precipitation, and adsorption. The prediction of elution sequence from RF values is also checked. The average Ri is found to be almost linearly dependent on the charge of the metal ions. The effect of the pKa of complexing acids on average RF values of 3d series metal ions is explained. A number of binary and ternary separations are achieved.

  10. Hydration to the poly(oxyethylene) derivative complexes of alkali metal ions and barium ion in 1,2-dichloroethane

    International Nuclear Information System (INIS)

    Kikuchi, Yoichi; Kubota, Mitsuru; Suzuki, Toshio; Sawada, Kiyoshi.

    1994-01-01

    A series of poly(oxyethylene) derivatives (POE compound) complexes of alkali metal and barium ions were extracted into 1,2-dichloroethane (1,2-DCE) by forming ion-pairs with picrate ion. Water molecules were coextracted into 1,2-DCE with the ion-pairs. The mean number of water molecules bound to the POE compound, X H2O,S , and its complex, X H2O,comp , in water saturated with 1,2-DCE was determined by means of aquametry. The X H2O,S value increases with the increase in the number of the oxyethylene units (EO unit) of the POE compound. The X H2O,comp value decreases in the order Li + >Na + >K + ≅Rb + ≅Cs + in any POE compound systems, and increases with the number of EO units of the POE compounds for a given metal ion. These results are interpreted by the hypothesis that the water molecules bound to the complex are those hydrated to the central metal ion, and the hydrated metal ion is surrounded by the EO chain with a helical conformation in the complex. The large number of water molecules are coordinating to the lithium ion complexes and bring about a serious distortion in the helical structure of the complexes. Because of the ion-pair formation with two picrate ions, the X H2O,comp values of barium ion complexes are smaller than those of potassium ion complexes. (author)

  11. Spectroscopy of metal-ion complexes with peptide-related ligands.

    Science.gov (United States)

    Dunbar, Robert C

    2015-01-01

    With new experimental tools and techniques developing rapidly, spectroscopic approaches to characterizing gas-phase metal ion complexes have emerged as a lively area of current research, with particular emphasis on structural and conformational information. The present review gives detailed attention to the metal-ion complexes of amino acids (and simple derivatives), much of whose study has focused on the question of charge-solvation vs salt-bridge modes of complexation. Alkali metal ions have been most frequently examined, but work with other metal ions is discussed to the extent to which they have been studied. The majority of work has been with simple cationic metal ion complexes, while recent excursions into deprotonated complexes, anionic complexes, and dimer complexes are also of interest. Interest is growing in complexes of small peptides, which are discussed both in the context of possible zwitterion formation as a charge-solvation alternative, and of the alternative metal-ion bond formation to amide nitrogens in structures involving iminol tautomerization. The small amount of work on complexes of large peptides and proteins is considered, as are the structural consequences of solvation of the gas-phase complexes. Spectroscopy in the visible/UV wavelength region has seen less attention than the IR region for structure determination of gas-phase metal-ion complexes; the state of this field is briefly reviewed.

  12. Multiheteromacrocycles that Complex Metal Ions. Sixth Progress Report, 1 May 1979-30 April 1980

    Science.gov (United States)

    Cram, D. J.

    1980-01-15

    Objective is to design synthesize, and evaluate cyclic and polycyclic host organic compounds for their abilities to complex and lipophilize guest metal ions, their complexes, and their clusters. Host organic compounds consist of strategically placed solvating, coordinating, and ion-pairing sites tied together by covalent bonds through hydrocarbon units around cavities shaped to be occupied by guest metal ions or by metal ions plus their ligands. Specificity in complexation is sought by matching the following properties of host and guest: cavity and metal ion sizes; geometric arrangements of binding sites; number of binding sites; character of binding sites; and valences. During this period, hemispherands based on an aryloxy or cyclic urea unit, spherands based on aryloxyl units only, and their complexes with alkali metals and alkaline earths were investigated. An attempt to separate {sup 6}Li and {sup 7}Li by gel permeation chromatography of lithiospherium chloride failed. (DLC)

  13. Structures and energetics of complexation of metal ions with ammonia, water, and benzene: A computational study.

    Science.gov (United States)

    Sharma, Bhaskar; Neela, Y Indra; Narahari Sastry, G

    2016-04-30

    Quantum chemical calculations have been performed at CCSD(T)/def2-TZVP level to investigate the strength and nature of interactions of ammonia (NH3 ), water (H2 O), and benzene (C6 H6 ) with various metal ions and validated with the available experimental results. For all the considered metal ions, a preference for C6 H6 is observed for dicationic ions whereas the monocationic ions prefer to bind with NH3 . Density Functional Theory-Symmetry Adapted Perturbation Theory (DFT-SAPT) analysis has been employed at PBE0AC/def2-TZVP level on these complexes (closed shell), to understand the various energy terms contributing to binding energy (BE). The DFT-SAPT result shows that for the metal ion complexes with H2 O electrostatic component is the major contributor to the BE whereas, for C6 H6 complexes polarization component is dominant, except in the case of alkali metal ion complexes. However, in case of NH3 complexes, electrostatic component is dominant for s-block metal ions, whereas, for the d and p-block metal ion complexes both electrostatic and polarization components are important. The geometry (M(+) -N and M(+) -O distance for NH3 and H2 O complexes respectively, and cation-π distance for C6 H6 complexes) for the alkali and alkaline earth metal ion complexes increases down the group. Natural population analysis performed on NH3 , H2 O, and C6 H6 complexes shows that the charge transfer to metal ions is higher in case of C6 H6 complexes. © 2015 Wiley Periodicals, Inc.

  14. Process for the displacement of cyanide ions from metal-cyanide complexes

    Science.gov (United States)

    Smith, Barbara F.; Robinson, Thomas W.

    1997-01-01

    The present invention relates to water-soluble polymers and the use of such water-soluble polymers in a process for the displacement of the cyanide ions from the metal ions within metal-cyanide complexes. The process waste streams can include metal-cyanide containing electroplating waste streams, mining leach waste streams, mineral processing waste streams, and related metal-cyanide containing waste streams. The metal ions of interest are metals that give very strong complexes with cyanide, mostly iron, nickel, and copper. The physical separation of the water-soluble polymer-metal complex from the cyanide ions can be accomplished through the use of ultrafiltration. Once the metal-cyanide complex is disrupted, the freed cyanide ions can be recovered for reuse or destroyed using available oxidative processes rendering the cyanide nonhazardous. The metal ions are released from the polymer, using dilute acid, metal ion oxidation state adjustment, or competing chelating agents, and collected and recovered or disposed of by appropriate waste management techniques. The water-soluble polymer can then be recycled. Preferred water-soluble polymers include polyethyleneimine and polyethyleneimine having a catechol or hydroxamate group.

  15. Multiheteromacrocycles that complex metal ions. Third progress report, 1 May 1976--30 April 1977

    International Nuclear Information System (INIS)

    Cram, D.J.

    1977-01-01

    The overall objective of this research is to design, synthesize and evaluate cyclic and polycyclic host organic compounds for their abilities to complex and lipophilize guest metal ions, their complexes and clusters. Host organic compounds consist of strategically placed solvating, coordinating and ion-pairing sites tied together by covalent bonds through hydrocarbon units around cavities shaped to be occupied by guest metal ions, or metal ions plus their ligands. Specificity in complexation is sought by matching the following properties of host and guest: cavity and metal ion sizes; geometric arrangements of binding sites; numbers of binding sites; characters of binding sites; and valences. The specific compounds synthesized and their complexing and lipophilizing properties are summarized

  16. Density functional study of isoguanine tetrad and pentad sandwich complexes with alkali metal ions.

    Science.gov (United States)

    Meyer, Michael; Steinke, Thomas; Sühnel, Jürgen

    2007-02-01

    Isoguanine tetraplexes and pentaplexes contain two or more stacked polyads with intercalating metal ions. We report here the results of a density functional study of sandwiched isoguanine tetrad and pentad complexes consisting of two polyads with Na(+), K(+) and Rb(+) ions at the B3LYP level. In comparison to single polyad metal ion complexes, there is a trend towards increased non-planarity of the polyads in the sandwich complexes. In general, the pentad sandwiches have relatively planar polyad structures, whereas the tetrad complexes contain highly non-planar polyad building blocks. As in other sandwich complexes and in metal ion complexes with single polyads, the metal ion-base interaction energy plays an essential role. In iG sandwich structures, this interaction energy is slightly larger than in the corresponding guanine sandwich complexes. Because the base-base interaction energy is even more increased in passing from guanine to isoguanine, the isoguanine sandwiches are thus far the only examples where the base-base interaction energy is larger than the base-metal ion interaction energy. Stacking interactions have been studied in smaller models consisting of two bases, retaining the geometry from the complete complex structures. From the data obtained at the B3LYP and BH&H levels and with Møller-Plesset perturbation theory, one can conclude that the B3LYP method overestimates the repulsion in stacked base dimers. For the complexes studied in this work, this is only of minor importance because the direct inter-tetrad or inter-pentad interaction is supplemented by a strong metal ion-base interaction. Using a microsolvation model, the metal ion preference K(+) approximately Rb(+) > Na(+) is found for tetrad complexes. On the other hand, for pentads the ordering is Rb(+) > K(+) > Na(+). In the latter case experimental data are available that agree with this prediction.

  17. Infrared Spectroscopy of Metal Ion Complexes: Models for Metal Ligand Interactions and Solvation

    Science.gov (United States)

    Duncan, Michael

    2006-03-01

    Weakly bound complexes of the form M^+-Lx (M=Fe, Ni, Co, etc.; L=CO2, C2H2, H2O, benzene, N2) are prepared in supersonic molecular beams by laser vaporization in a pulsed-nozzle cluster source. These species are mass analyzed and size-selected in a reflectron time-of-flight mass spectrometer. Clusters are photodissociated at infrared wavelengths with a Nd:YAG pumped infrared optical parametric oscillator/amplifier (OPO/OPA) laser or with a tunable infrared free-electron laser. M^+-(CO2)x complexes absorb near the free CO2 asymmetric stretch near 2349 cm-1 but with an interesting size dependent variation in the resonances. Small clusters have blue-shifted resonances, while larger complexes have additional bands due to surface CO2 molecules not attached to the metal. M^+(C2H2)n complexes absorb near the C-H stretches in acetylene, but resonances in metal complexes are red-shifted with repect to the isolated molecule. Ni^+ and Co^+ complexes with acetylene undergo intracluster cyclization reactions to form cyclobutadiene. Transition metal water complexes are studied in the O-H stretch region, and partial rotational structure can be measured. M^+(benzene) and M^+(benzene)2 ions (M=V, Ti, Al) represent half-sandwich and sandwich species, whose spectra are measured near the free benzene modes. These new IR spectra and their assignments will be discussed as well as other new IR spectra for similar complexes.

  18. Peptides having antimicrobial activity and their complexes with transition metal ions.

    Science.gov (United States)

    Jeżowska-Bojczuk, Małgorzata; Stokowa-Sołtys, Kamila

    2018-01-01

    Peptide antibiotics are produced by bacterial, mammalian, insect or plant organisms in defense against invasive microbial pathogens. Therefore, they are gaining importance as anti-infective agents. There are a number of antibiotics that require metal ions to function properly. Metal ions play a key role in their action and are involved in specific interactions with proteins, nucleic acids and other biomolecules. On the other hand, it is well known that some antimicrobial agents possess functional groups that enable them interacting with metal ions present in physiological fluids. Some findings support a hypothesis that they may alter the serum metal ions concentration in humans. Complexes usually have a higher positive charge than uncomplexed compounds. This means that they might interact more tightly with polyanionic DNA and RNA molecules. It has been shown that several metal ion complexes with antibiotics promote degradation of DNA. Some of them, such as bleomycin, form stable complexes with redox metal ions and split the nucleic acids chain via the free radicals mechanism. However, this is not a rule. For example blasticidin does not cause DNA damage. This indicates that some peptide antibiotics can be considered as ligands that effectively lower the oxidative activity of transition metal ions. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  19. Effects of complexing compounds on sorption of metal ions to cement

    Energy Technology Data Exchange (ETDEWEB)

    Loevgren, Lars [Umeaa Univ. (Sweden). Inorganic chemistry

    2005-12-15

    This present report is a literature review addressing the effects of complexing ligands on the sorption of radionuclides to solid materials of importance for repositories of radioactive waste. Focus is put on laboratory studies of metal ion adsorption to cement in presence of chelating agents under strongly alkaline conditions. As background information, metal sorption to different mineral and cement phases in ligand free systems is described. Furthermore, surface complexation model (SCM) theories are introduced. According to surface complexation theories these interactions occur at specific binding sites at the particle/water interface. Adsorption of cationic metals is stronger at high pH, and the adsorption of anions occurs preferentially at low pH. The adsorption of ions to mineral surfaces is a result of both chemical bonding and electrostatic attraction between the ions and charged mineral surfaces. By combining uptake data with spectroscopic information the sorption can be explained on a molecular level by structurally sound surface complexation models. Most of the metal sorption studies reviewed are dealing with minerals exhibiting oxygen atoms at their surfaces, mainly oxides of Fe(II,III) and Al(III), and aluminosilicates. Investigations of radionuclides are focused on clay minerals, above all montmorillonite and illite. Which mechanism that is governing the metal ion adsorption to a given mineral is to a large extent depending on the metal adsorbed. For instance, sorption of Ni to montmorillonite can occur by formation of inner-sphere mononuclear surface complexes located at the edges of montmorillonite platelets and by formation of a Ni phyllosilicate phase parallel to montmorillonite layers. Also metal uptake to cement materials can occur by different mechanisms. Cationic metals can both be attached to cement (calcium silicate hydrate, CSH) and hardened cement paste (HCP) by formation of inner-sphere complexes at specific surface sites and by

  20. Metal-ion complexes of functionalised 1,10-Phenanthrolines as hydrolytic synzymes

    NARCIS (Netherlands)

    Weijnen, J.G.J.

    1993-01-01

    In this thesis metal-ion complexes of functionalised 1,10-phenanthroline derivatives have been studied as model systems for hydrolytic metallo-enzymes. Amphiphilic metallo- complexes incorporated into micelles or vesicles and water-soluble complexes in pure aqueous buffer solutions, have

  1. Metal Cation Binding to Gas-Phase Pentaalanine: Divalent Ions Restructure the Complex

    NARCIS (Netherlands)

    Dunbar, R.C.; Steill, J.D.; Polfer, N.C.; Oomens, J.

    2013-01-01

    Ion-neutral complexes of pentaalalanine with several singly- and doubly charged metal ions are examined using conformation analysis by infrared multiple photon dissociation (IRMPD) spectroscopy and density functional theory (DFT) computations. The infrared spectroscopy in the 1500-1800 cm(-1) region

  2. Use of a Silver Ion Selective Electrode for the Determination of Stability Constants of Metal Complexes

    OpenAIRE

    Akio, Yuchi; Hiroko, Wada; Genkichi, Nakagawa

    1985-01-01

    The potential response of a sulfide-based silver ion selective electrode was examined in various metal buffer solutions. In every system tested, the potential response of the electrode was rapid and the electrode potential correctly reflected the free silver ion concentration in the solution. The stability constants of silver complexes with seven ligands were determined. This electrode was used also to measure the free cyanide ion concentration in the solutions containing silver, cyanide and ...

  3. A mononuclear non-heme manganese(IV)-oxo complex binding redox-inactive metal ions.

    Science.gov (United States)

    Chen, Junying; Lee, Yong-Min; Davis, Katherine M; Wu, Xiujuan; Seo, Mi Sook; Cho, Kyung-Bin; Yoon, Heejung; Park, Young Jun; Fukuzumi, Shunichi; Pushkar, Yulia N; Nam, Wonwoo

    2013-05-01

    Redox-inactive metal ions play pivotal roles in regulating the reactivities of high-valent metal-oxo species in a variety of enzymatic and chemical reactions. A mononuclear non-heme Mn(IV)-oxo complex bearing a pentadentate N5 ligand has been synthesized and used in the synthesis of a Mn(IV)-oxo complex binding scandium ions. The Mn(IV)-oxo complexes were characterized with various spectroscopic methods. The reactivities of the Mn(IV)-oxo complex are markedly influenced by binding of Sc(3+) ions in oxidation reactions, such as a ~2200-fold increase in the rate of oxidation of thioanisole (i.e., oxygen atom transfer) but a ~180-fold decrease in the rate of C-H bond activation of 1,4-cyclohexadiene (i.e., hydrogen atom transfer). The present results provide the first example of a non-heme Mn(IV)-oxo complex binding redox-inactive metal ions that shows a contrasting effect of the redox-inactive metal ions on the reactivities of metal-oxo species in the oxygen atom transfer and hydrogen atom transfer reactions.

  4. Theory Meets Experiment: Metal Ion Effects in HCV Genomic RNA Kissing Complex Formation.

    Science.gov (United States)

    Sun, Li-Zhen; Heng, Xiao; Chen, Shi-Jie

    2017-01-01

    The long-range base pairing between the 5BSL3. 2 and 3'X domains in hepatitis C virus (HCV) genomic RNA is essential for viral replication. Experimental evidence points to the critical role of metal ions, especially Mg 2+ ions, in the formation of the 5BSL3.2:3'X kissing complex. Furthermore, NMR studies suggested an important ion-dependent conformational switch in the kissing process. However, for a long time, mechanistic understanding of the ion effects for the process has been unclear. Recently, computational modeling based on the Vfold RNA folding model and the partial charge-based tightly bound ion (PCTBI) model, in combination with the NMR data, revealed novel physical insights into the role of metal ions in the 5BSL3.2-3'X system. The use of the PCTBI model, which accounts for the ion correlation and fluctuation, gives reliable predictions for the ion-dependent electrostatic free energy landscape and ion-induced population shift of the 5BSL3.2:3'X kissing complex. Furthermore, the predicted ion binding sites offer insights about how ion-RNA interactions shift the conformational equilibrium. The integrated theory-experiment study shows that Mg 2+ ions may be essential for HCV viral replication. Moreover, the observed Mg 2+ -dependent conformational equilibrium may be an adaptive property of the HCV genomic RNA such that the equilibrium is optimized to the intracellular Mg 2+ concentration in liver cells for efficient viral replication.

  5. Investigation of the complexation of metal-ions by strong ligands in fresh and marine water.

    Science.gov (United States)

    Pesavento, Maria; Biesuz, Raffaela; Profumo, Antonella; Soldi, Teresa

    2003-01-01

    The detection and investigation of metal ions bound in strong complexes in natural waters is a difficult task, due to low concentration of the metal ions themselves, and also of the strong ligands, which, moreover, are often not of a well-defined composition. Here, a method is proposed for the investigation of the speciation of metal ions in natural waters. It is based on the sorption of metal ions on strongly sorbing ion exchange resins, i.e. complexing resins. For this reason the method is called Resin Titration. It has been shown in previous investigations that the concentration of metal ion totally sorbed by a particular resin, and its reaction coefficient in the solution phase in the presence of the resin, can be determined from the sorption data using a simple relationship. Here, a data treatment (the Ruzic linearization method) is proposed for also determining the concentration of the ligands responsible for the complex in equilibrium with the resin. The method was applied to data obtained by Resin Titration of a freshwater and a seawater. Copper(II) and aluminium(III) were considered, using Chelex 100 as a titrant, due to its strong sorbing properties towards these metal ions. The results were: the total metal concentration in equilibrium with the resin, the side reaction coefficients, and the concentration of ligands. In all these cases the ligands forming very strong complexes were found to be at concentration lower than that of the metals. The Ruzic linearization method allows the determination of the concentration of the ligands forming very strong complexes in equilibrium with Chelex 100. The reaction coefficient was better determined by the calculation method previously proposed for RT. The ligands responsible for the strong complexes were found to be at low concentration, often lower than that of the metal ions considered. The metal in the original sample is partly bound to these ligands, since the complexes are very strong. Only a part of the metal

  6. Evaluation of complexing agents and column temperature in ion chromatographic separation of alkali metals, alkaline earth metals and transition metals ion

    International Nuclear Information System (INIS)

    Kelkar, Anoop; Pandey, Ashish; Name, Anil B.; Das, D.K.; Behere, P.G.; Mohd Afzal

    2015-01-01

    The aim of ion chromatography method development is the resolution of all metal ions of interests. Resolution can be improved by changing the selectivity. Selectivity in chromatography can be altered by changes in mobile phase (eg eluent type, eluent strength) or through changes in stationary phase. Temperature has been used in altering the selectivity of particularly in reversed phase liquid chromatography and ion exchange chromatography. Present paper describe the retention behaviour of alkali metals, alkaline earth metals and transition metal ions on a silica based carboxylate function group containing analyte column. Alkali metals, alkaline earth metals and transition metal ions were detected by ion conductivity and UV-VIS detectors respectively

  7. UV and IR spectroscopy of cold 1,2-dimethoxybenzene complexes with alkali metal ions

    OpenAIRE

    Inokuchi Y; Boyarkin OV; Ebata T; Rizzo TR

    2012-01-01

    We report UV photodissociation (UVPD) and IR UV double resonance spectra of 12 dimethoxybenzene (DMB) complexes with alkali metal ions M+center dot DMB (M = Li Na K Rb and Cs) in a cold 22 pole ion trap. The UVPD spectrum of the Li+ complex shows a strong origin band. For the K+center dot DMB Rb+center dot DMB and Cs+center dot DMB complexes the origin band is very weak and low frequency progressions are much more extensive than that of the Li+ ion. In the case of the Na+center dot DMB comple...

  8. Crystal structures of Dronpa complexed with quenchable metal ions provide insight into metal biosensor development.

    Science.gov (United States)

    Kim, In Jung; Kim, Sangsoo; Park, Jeahyun; Eom, Intae; Kim, Sunam; Kim, Jin-Hong; Ha, Sung Chul; Kim, Yeon Gil; Hwang, Kwang Yeon; Nam, Ki Hyun

    2016-09-01

    Many fluorescent proteins (FPs) show fluorescence quenching by specific metal ions, which can be applied towards metal biosensor development. In this study, we investigated the significant fluorescence quenching of Dronpa by Co(2+) and Cu(2+) ions. Crystal structures of Co(2+) -, Ni(2+) - and Cu(2+) -bound Dronpa revealed previously unseen, unique, metal-binding sites for fluorescence quenching. These metal ions commonly interact with surface-exposed histidine residues (His194-His210 and His210-His212), and interact indirectly with chromophores. Structural analysis of the Co(2+) - and Cu(2+) - binding sites of Dronpa provides insight into FP-based metal biosensor engineering. © 2016 Federation of European Biochemical Societies.

  9. Theory Meets Experiment: Metal Ion Effects in HCV Genomic RNA Kissing Complex Formation

    OpenAIRE

    Sun, Li-Zhen; Heng, Xiao; Chen, Shi-Jie

    2017-01-01

    The long-range base pairing between the 5BSL3. 2 and 3′X domains in hepatitis C virus (HCV) genomic RNA is essential for viral replication. Experimental evidence points to the critical role of metal ions, especially Mg2+ ions, in the formation of the 5BSL3.2:3′X kissing complex. Furthermore, NMR studies suggested an important ion-dependent conformational switch in the kissing process. However, for a long time, mechanistic understanding of the ion effects for the process has been unclear. Rece...

  10. Pesticides Curbing Soil Fertility: Effect of Complexation of Free Metal Ions

    KAUST Repository

    Kaur, Sukhmanpreet

    2017-07-04

    Researchers have suggested that the reason behind infertility is pernicious effect of broad spectrum pesticides on non target, beneficial microorganism of soil. Here, studying the chelating effect of selective organophosphate and carbamate pesticides with essential metal ions, at all possible combinations of three different pH (4 ± 0.05, 7 ± 0.05 and 9 ± 0.05) and three different temperatures (15 ± 0.5°C, 30 ± 0.5°C and 45 ± 0.5°C), shows very fast rate of reaction which further increases with increase of pH and temperature. Carbonyl oxygen of carbamate and phosphate oxygen of organophosphate were found to be common ligating sites among all the complexes. Formed metal complexes were found to be highly stable and water insoluble on interaction with essential metal ions in solvent medium as well as over silica. Density functional theory (DFT) calculations not only reinforced the experimental observations, but, after a wide computational conformational analysis, unraveled the nature of the high stable undesired species that consist of pesticides complexed by metal ions from the soil. All in all, apart from the direct toxicity of pesticides, the indirect effect by means of complexation of free metal ions impoverishes the soil.

  11. Pesticides Curbing Soil Fertility: Effect of Complexation of Free Metal Ions

    Science.gov (United States)

    Kaur, Sukhmanpreet; Kumar, Vijay; Chawla, Mohit; Cavallo, Luigi; Poater, Albert; Upadhyay, Niraj

    2017-07-01

    Researchers have suggested that the reason behind infertility is pernicious effect of broad spectrum pesticides on non target, beneficial microorganism of soil. Here, studying the chelating effect of selective organophosphate and carbamate pesticides with essential metal ions, at all possible combinations of three different pH (4±0.05, 7±0.05 and 9±0.05) and three different temperatures (15±0.5°C, 30±0.5°C and 45±0.5°C), shows very fast rate of reaction which further increases with increase of pH and temperature. Carbonyl oxygen of carbamate and phosphate oxygen of organophosphate were found to be common ligating sites among all the complexes. Formed metal complexes were found to be highly stable and water insoluble on interaction with essential metal ions in solvent medium as well as over silica. Density functional theory (DFT) calculations not only reinforced the experimental observations, but, after a wide computational conformational analysis, unraveled the nature of the high stable undesired species that consist of pesticides complexed by metal ions from the soil. All in all, apart from the direct toxicity of pesticides, the indirect effect by means of complexation of free metal ions impoverishes the soil.

  12. Metal ion cage complexes as imaging agents for cancer cells

    International Nuclear Information System (INIS)

    Di Bartolo, N.; Smith, S.; Sargeson, A.

    2000-01-01

    Full text: Cage ligands are very attractive for use in radiolabelling antibodies. Their synthesis is based around Co(III) octahedral co-ordination chemistry and they may be easily derivatised for attachment to antibodies. They are known to form kinetically inert metal complexes. Copper-64 (t 1/2 = 12.7 h) has been identified as having potential value in diagnostic and therapeutic application. Its positron annihilation radiation is useful for PET imaging, while its beta (E max 578 keV, 37.2 %) emissions may also be suitable for therapy. In the current study, the new hexa-aza-cryptand, 1 -N-(4-amino-benzyl)-3,6,10,13,16,19-hexaaza-bicyclo[6.6.6]eicosane- 1,8-diamine, or SarAr, has been synthesised specifically for radiolabelling antibodies with 64 Cu and a kit formulation has been produced. The resulting radiolabelled immunoconjugate ( 64 Cu-SarArB-72.3) was injected into nude mice bearing LS174t colorectal carcinoma. Clearance of 64 CuSarAr-B72.3 from the liver and kidneys was typical of a whole IgG antibody. Tumour localisation was comparable to similar radiolabelled immunoconjugates (38± 5 % ID/g at 48 hours). Biodistribution studies of 123 I- and 111 In- radiolabelled B72.3 were conducted in the same animal model. MIRDOSE 3 was used to compare target to non-target dose of their analogous therapeutic counterparts ( 90 Y and 131 I respectively) with 64 Cu-SarAr-B72.3. Total body dose for 64 Cu-SarAr-B72.3 was significantly lower (0.09 rad/mCi) than analogous products ( 131 I-B72.3, 2.64 rad/mCi; 90 Y- B72.3, 2.387 rad/mCi) while still providing enough dose to small tumours to be potentially therapeutic. In order to assess therapeutic effect of 64 Cu, a biological study was conducted over a 12 month period. Nude mice bearing tumours between 3.5 - 5.5 mm in length were injected with various doses (0, 10, 20, 30, 40 MBq) of 64 Cu-SarAr-B72.3. Animals were regularly monitored for tumour size, animal mass, behavioural and physical abnormalities (e.g. movement / gait

  13. A Mononuclear Non-Heme Manganese(IV)-Oxo Complex Binding Redox-Inactive Metal Ions

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Junying; Lee, Yong-Min; Davis, Katherine M.; Wu, Xiujuan; Seo, Mi Sook; Cho, Kyung-Bin; Yoon, Heejung; Park, Young Jun; Fukuzumi, Shunichi; Pushkar, Yulia N.; Nam, Wonwoo [Ewha; (Purdue); (Osaka)

    2013-05-29

    Redox-inactive metal ions play pivotal roles in regulating the reactivities of high-valent metal–oxo species in a variety of enzymatic and chemical reactions. A mononuclear non-heme Mn(IV)–oxo complex bearing a pentadentate N5 ligand has been synthesized and used in the synthesis of a Mn(IV)–oxo complex binding scandium ions. The Mn(IV)–oxo complexes were characterized with various spectroscopic methods. The reactivities of the Mn(IV)–oxo complex are markedly influenced by binding of Sc3+ ions in oxidation reactions, such as a ~2200-fold increase in the rate of oxidation of thioanisole (i.e., oxygen atom transfer) but a ~180-fold decrease in the rate of C–H bond activation of 1,4-cyclohexadiene (i.e., hydrogen atom transfer). The present results provide the first example of a non-heme Mn(IV)–oxo complex binding redox-inactive metal ions that shows a contrasting effect of the redox-inactive metal ions on the reactivities of metal–oxo species in the oxygen atom transfer and hydrogen atom transfer reactions.

  14. Polarographic Determination of Composition and Thermodynamic Stability Constant of a Complex Metal Ion.

    Science.gov (United States)

    Marin, Dolores; Mendicuti, Francisco

    1988-01-01

    Describes a laboratory experiment designed to encourage laboratory cooperation among individual undergraduate students or groups. Notes each student contributes results individually and the exchange of data is essential to obtain final results. Uses the polarographic method for determining complex metal ions. (MVL)

  15. Multiheteromacrocycles that Complex Metal Ions. Fourth Progress Report, 1 May 1977 -- 30 April 1978

    Science.gov (United States)

    Cram, D. J.

    1978-01-15

    Results are reported in a program to design, synthesize, and evaluate polycyclic host organic compounds for their abilities to complex and lipophilize guest metal ions. Work during the reporting period was devoted to synthesis and study of cyclohexametaphenylenes and cyclic phosphine oxides. (JRD)

  16. Predicting the stability constants of metal-ion complexes from first principles

    Czech Academy of Sciences Publication Activity Database

    Gutten, Ondrej; Rulíšek, Lubomír

    2013-01-01

    Roč. 52, č. 18 (2013), s. 10347-10355 ISSN 0020-1669 Institutional support: RVO:61388963 Keywords : stability constants * solvation energy * metal-ion complexation * theoretical calculations * DFT methods Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.794, year: 2013

  17. Metal Ion Complexes with HisGly: Comparison with PhePhe and PheGly

    NARCIS (Netherlands)

    Dunbar, R.C.; Oomens, J.; Berden, G.; Lau, J.K.C.; Verkerk, U.H.; Hopkinson, A.C.; Siu, K.W.M.

    2013-01-01

    Gas-phase complexes of five metal ions with the dipeptide HisGly have been characterized by DFT computations and by infrared multiple photon dissociation spectroscopy (IRMPD) using the free electron laser FELIX. Fine agreement is found in all five cases between the predicted IR spectral features of

  18. Theory Meets Experiment: Metal Ion Effects in HCV Genomic RNA Kissing Complex Formation

    Directory of Open Access Journals (Sweden)

    Li-Zhen Sun

    2017-12-01

    Full Text Available The long-range base pairing between the 5BSL3. 2 and 3′X domains in hepatitis C virus (HCV genomic RNA is essential for viral replication. Experimental evidence points to the critical role of metal ions, especially Mg2+ ions, in the formation of the 5BSL3.2:3′X kissing complex. Furthermore, NMR studies suggested an important ion-dependent conformational switch in the kissing process. However, for a long time, mechanistic understanding of the ion effects for the process has been unclear. Recently, computational modeling based on the Vfold RNA folding model and the partial charge-based tightly bound ion (PCTBI model, in combination with the NMR data, revealed novel physical insights into the role of metal ions in the 5BSL3.2-3′X system. The use of the PCTBI model, which accounts for the ion correlation and fluctuation, gives reliable predictions for the ion-dependent electrostatic free energy landscape and ion-induced population shift of the 5BSL3.2:3′X kissing complex. Furthermore, the predicted ion binding sites offer insights about how ion-RNA interactions shift the conformational equilibrium. The integrated theory-experiment study shows that Mg2+ ions may be essential for HCV viral replication. Moreover, the observed Mg2+-dependent conformational equilibrium may be an adaptive property of the HCV genomic RNA such that the equilibrium is optimized to the intracellular Mg2+ concentration in liver cells for efficient viral replication.

  19. Zinc (II) metal ion complexes of Chitosan: Toward heterogeneous ...

    African Journals Online (AJOL)

    The Application of Zn(II)-Chit for the polymerization of VAc yielded PVAc in good yield. The catalyst efficiency of Zn(II)-Chit for the polymerization of VAc was considerably high in terms of induction period and percentage yield of PVAc. Keywords: Chitosan, Zn(II)-Chitosan Complex, Catalyst, Polymerization, Polyvinyl Acetate ...

  20. Multiheteromacrocycles that Complex Metal Ions. Ninth Progress Report (includes results of last three years), 1 May 1980 -- 30 April 1983

    Science.gov (United States)

    Cram, D. J.

    1982-09-15

    The overall objective of this research is to design, synthesize, and evaluate cyclic and polycyclic host organic compounds for the abilities to complex and lipophilize guest metal ions, their complexes, and their clusters. Host organic compounds consist of strategically placed solvating, coordinating, and ion-pairing sites tied together by covalent bonds through hydrocarbon units around cavities shaped to be occupied by guest metal ions, or by metal ions plus their ligands. Specificity in complexation is sought by matching the following properties of host and guest: cavity and metal ion sizes; geometric arrangements of binding sites; numbers of binding sites; characters of binding sites; and valences. The hope is to synthesize new classes of compounds useful in the separation of metal ions, their complexes, and their clusters.

  1. Investigation of complexing ability of ionites with various groups to some heavy and transition metal ions

    Directory of Open Access Journals (Sweden)

    Yedil Yergozhin

    2013-05-01

    Full Text Available The physico-chemical and complexing properties of the sorbent based on chloromethylated styrene and divinylbenzene copolymer with nicotinamide groups and copolymers based on metacryloilaminobenzene acids with 2-methyl-5-vinylpyridineisomers are studied. By potentiometric titration method the constant of polyelectrolytes functional groups ionization, the composition and strength of the resulting complexes with ions of some heavy and transition metals are determined.

  2. Interaction of Metal Ions with Biomolecular Ligands: How Accurate Are Calculated Free Energies Associated with Metal Ion Complexation?

    Czech Academy of Sciences Publication Activity Database

    Gutten, Ondrej; Beššeová, Ivana; Rulíšek, Lubomír

    2011-01-01

    Roč. 115, č. 41 (2011), s. 11394-11402 ISSN 1089-5639 R&D Projects: GA MŠk LC512 Institutional research plan: CEZ:AV0Z40550506 Keywords : metal-ion selectivity * theoretical calculations * stability constants Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.946, year: 2011

  3. Actinide chelation: biodistribution and in vivo complex stability of the targeted metal ions.

    Science.gov (United States)

    Kullgren, Birgitta; Jarvis, Erin E; An, Dahlia D; Abergel, Rebecca J

    2013-01-01

    Because of the continuing use of nuclear fuel sources and heightened threats of nuclear weapon use, the amount of produced and released radionuclides is increasing daily, as is the risk of larger human exposure to fission product actinides. A rodent model was used to follow the in vivo distribution of representative actinides, administered as free metal ions or complexed with chelating agents including diethylenetriamine pentaacetic acid (DTPA) and the hydroxypyridinonate ligands 3,4,3-LI(1,2-HOPO) and 5-LIO(Me-3,2-HOPO). Different metabolic pathways for the different metal ions were evidenced, resulting in intricate ligand- and metal-dependent decorporation mechanisms. While the three studied chelators are known for their unrivaled actinide decorporation efficiency, the corresponding metal complexes may undergo in vivo decomposition and release metal ions in various biological pools. This study sets the basis to further explore the metabolism and in vivo coordination properties of internalized actinides for the future development of viable therapeutic chelating agents.

  4. Using Metal Complex Ion-Molecule Reactions in a Miniature Rectilinear Ion Trap Mass Spectrometer to Detect Chemical Warfare Agents

    Science.gov (United States)

    Graichen, Adam M.; Vachet, Richard W.

    2013-06-01

    The gas-phase reactions of a series of coordinatively unsaturated [Ni(L)n]y+ complexes, where L is a nitrogen-containing ligand, with chemical warfare agent (CWA) simulants in a miniature rectilinear ion trap mass spectrometer were investigated as part of a new approach to detect CWAs. Results show that upon entering the vacuum system via a poly(dimethylsiloxane) (PDMS) membrane introduction, low concentrations of several CWA simulants, including dipropyl sulfide (simulant for mustard gas), acetonitrile (simulant for the nerve agent tabun), and diethyl phosphite (simulant for nerve agents sarin, soman, tabun, and VX), can react with metal complex ions generated by electrospray ionization (ESI), thereby providing a sensitive means of detecting these compounds. The [Ni(L)n]2+ complexes are found to be particularly reactive with the simulants of mustard gas and tabun, allowing their detection at low parts-per-billion (ppb) levels. These detection limits are well below reported exposure limits for these CWAs, which indicates the applicability of this new approach, and are about two orders of magnitude lower than electron ionization detection limits on the same mass spectrometer. The use of coordinatively unsaturated metal complexes as reagent ions offers the possibility of further tuning the ion-molecule chemistry so that desired compounds can be detected selectively or at even lower concentrations.

  5. Development of complexation ion chromatography for the determination of metal ions

    OpenAIRE

    Bashir, Wasim

    2002-01-01

    A simple ion chromatographic method was developed for the determination of Pb(II) in river and polluted water samples. The method was based upon the use of a colourforming complexing eluent and direct visible detection of the eluting Pb(II) complex. Using the combination of a strong cation exchange column and an eluent consisting of 20 mM sodium acetate-acetic acid buffer and 0.2 mM xylenol orange (XO) (~pH = 4.2), Pb(II) was detected at 572 nm eluting in under 6.5 min. The developed method p...

  6. Application of the hybrid complexation-ultrafiltration process for metal ion removal from aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Zeng Jianxian [College of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201 (China) and College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China)], E-mail: zengjianxian@163.com; Ye Hongqi [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China); Hu Zhongyu [College of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201 (China)

    2009-01-30

    Complexation-ultrafiltration process was investigated for mercury and cadmium removal from aqueous solutions by using poly(acrylic acid) sodium salt (PAASS) as a complexing agent. The kinetics of complexation reactions of PAASS with the metal ions were studied under a large excess PAASS and pH 5.5. It takes 25 and 50 min for mercury and cadmium to get the complexation equilibrium, respectively, and the reaction kinetics can be described by a pseudo-first-order equation. Effects of various operating parameters such as loading ratios, pH values, etc. on metal rejection coefficients (R) were investigated. In the process of concentration, membrane fluxes decline slowly and R values are about 1. The concentrated retentates were used further for the decomplexation. The decomplexation ratio of mercury-PAASS complex is about 30%, whereas that of cadmium-PAASS complex reaches 93.5%. After the decomplexation, diafiltration experiments were carried out at pH 2.5. Cadmium can be diafiltrated satisfactorily from the retentate, but for mercury it is the contrary. Selective separation of the both metal ions was studied from a binary solution at pH 5. When mercury, cadmium and PAASS concentrations are 30, 30 and 40 mg L{sup -1}, respectively, mercury is retained by ultrafiltration while almost all cadmium passes through the membrane.

  7. Metal ion complexes with HisGly: comparison with PhePhe and PheGly.

    Science.gov (United States)

    Dunbar, Robert C; Oomens, Jos; Berden, Giel; Lau, Justin Kai-Chi; Verkerk, Udo H; Hopkinson, Alan C; Siu, K W Michael

    2013-06-27

    Gas-phase complexes of five metal ions with the dipeptide HisGly have been characterized by DFT computations and by infrared multiple photon dissociation spectroscopy (IRMPD) using the free electron laser FELIX. Fine agreement is found in all five cases between the predicted IR spectral features of the lowest energy structures and the observed IRMPD spectra in the diagnostic region 1500-1800 cm(-1), and the agreement is largely satisfactory at longer wavelengths from 1000 to 1500 cm(-1). Weak-binding metal ions (K(+), Ba(2+), and Ca(2+)) predominantly adopt the charge-solvated (CS) mode of chelation involving both carbonyl oxygens, an imidazole nitrogen of the histidine side chain, and possibly the amino nitrogen. Complexes with Mg(2+) and Ni(2+) are found to adopt iminol (Im) binding, involving the deprotonated amide nitrogen, with tetradentate chelation. This tetradentate coordination of Ni(II) is the preferred binding mode in the gas phase, against the expectation under condensed-phase conditions that such binding would be sterically unfavorable and overshadowed by other outcomes such as metal ion hydration and formation of dimeric complexes. The HisGly results are compared with corresponding results for the PheAla, PheGly, and PhePhe ligands, and parallel behavior is seen for the dipeptides with N-terminal Phe versus His residues. An exception is the different chelation pattern determined for PhePhe versus HisGly, reflecting the intercalation-type cation binding pocket of the PhePhe ligand. The complexes group into three well-defined spectroscopic patterns: nickel and magnesium, calcium and barium, and potassium. Factors leading to differentiation of these distinct spectroscopic categories are (1) differing propensities for choosing the iminol binding pattern, and (2) single versus double charge on the metal center. Nickel and magnesium ions show similar gas-phase binding behavior, contrasting with their quite different patterns of peptide interaction in

  8. Metal ion-improved complexation countercurrent chromatography for enantioseparation of dihydroflavone enantiomers.

    Science.gov (United States)

    Han, Chao; Wang, Wenli; Xue, Guimin; Xu, Dingqiao; Zhu, Tianyu; Wang, Shanshan; Cai, Pei; Luo, Jianguang; Kong, Lingyi

    2018-01-12

    Cu(II) ion was selected as an additive to improve the enantioseparation efficiency of three dihydroflavone enantiomers in high-speed counter-current chromatography (HSCCC), using hydroxypropyl-β-cyclodextrin (HP-β-CyD) as the chiral selector. The influences of important parameters, including the metal ion, the concentrations of HP-β-CyD and the Cu(II) ion, and the sample size were investigated. Under optimal conditions, three dihydroflavone enantiomers, including (±)-hesperetin, (±)-naringenin, and (±)-farrerol, were successfully enantioseparated. The chiral recognition mechanism was investigated. The enantioseparation was attributed to the different thermodynamic stabilities of the binary complexes of HP-β-CyD and (±)-hesperetin, and Cu(II) ion could enhance this difference by forming ternary complexes with the binary complexes. This Cu(II) ion-improved complexation HSCCC system exhibited improved performance for chiral separation, and therefore it has great application potential in the preparative enantioseparation of other compounds with similar skeletons. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Multiheteromacrocycles that Complex Metal Ions. Second Progress Report, 1 May 1975 -- 30 April 1976

    Science.gov (United States)

    Cram, D. J.

    1976-01-15

    Objective is to develop cyclic and polycyclic host organic compounds to complex and lipophilize metal ions. Macrorings were synthesized: (OCH{sub 2} CH{sub 2} O CH{sub 2}COCH{sub 2} COCH{sub 2}){sub 2} and (OCH{sub 2} CH{sub 2} O CH{sub 2} COCH{sub 2} COCH{sub 2}){sub 3}. The smaller ring complexes divalent metals 10{sup 1+9} times better than the open-chain model CH{sub 3} O CH{sub 2} CO CH{sub 2} COCH{sub 2} O CH{sub 3}, and the order in which metal ions are complexed is Cu{sup 2+}, UO{sub 2}{sup 2+} greater than Ni{sup 2+} greater than Fe{sup 2+}, Co{sup 2+}, Zn{sup 2+}, Cd{sup 2+} greater than Mn{sup 2+}. The UO{sub 2}{sup 2+} and Cu{sup 2+} complexes were isolated and characterized. The larger ring complexes trivalent metals 10{sup 0.9-1.7} times better than the open- chain model compound, and the order is La{sup 3+}, Ce{sup 3+} greater than Cr{sup 3+}. Five other macrocycles were also synthesized, and their binding constants with Na, K, NH{sub 4}, and Cs picrates were measured. Six compounds containing one macroring and two inward-pointing ArOH or ArOCH{sub 3} groups were also prepared and tested for binding of Li, Na, K, Rb, and NH{sub 4} picrates. Racemic compounds containing two binaphthyls and its sulfur analog were prepared. Cage-shaped multiheteromacrocycles containing ten O ligand sites or four S and six O ligand sites were prepared and the binding capability of the first compound for picrates studied. Two ring systems with phosphonate ester groups were also prepared. (DLC)

  10. Molar absorption coefficients and stability constants of Zincon metal complexes for determination of metal ions and bioinorganic applications.

    Science.gov (United States)

    Kocyła, Anna; Pomorski, Adam; Krężel, Artur

    2017-11-01

    Zincon (ZI) is one of the most common chromophoric chelating probes for the determination of Zn 2+ and Cu 2+ ions. It is also known to bind other metal ions. However, literature data on its binding properties and molar absorption coefficients are rather poor, varying among publications or determined only in certain conditions. There are no systematic studies on Zn 2+ and Cu 2+ affinities towards ZI performed under various conditions. However, this widely commercially available and inexpensive agent is frequently the first choice probe for the measurement of metal binding and release as well as determination of affinity constants of other ligands/macromolecules of interest. Here, we establish the spectral properties and the stability of ZI and its complexes with Zn 2+ , Cu 2+ , Cd 2+ , Hg 2+ , Co 2+ , Ni 2+ and Pb 2+ at multiple pH values from 6 to 9.9. The obtained results show that in water solution the MZI complex is predominant, but in the case of Co 2+ and Ni 2+ , M(ZI) 2 complexes are also formed. The molar absorption coefficient at 618 nm for ZnZI and 599nm for CuZI complexes at pH7.4 in buffered (I=0.1M) water solutions are 24,200 and 26,100M -1 cm -1 , respectively. Dissociation constants of those complexes are 2.09×10 -6 and 4.68×10 -17 M. We also characterized the metal-assisted Zincon decomposition. Our results provide new and reassessed optical and stability data that are applicable to a wide range of chemical and bioinorganic applications including metal ion detection, and quantification and affinity studies of ligands of interest. Accurate values of molar absorption coefficients of Zincon complex with Zn 2+ , Cd 2+ , Hg 2+ , Co 2+ , Ni 2+ , Cu 2+ , and Pb 2+ for rapid metal ion quantification are provided. Zincon stability constants with Zn 2+ and Cu 2+ in a wide pH range were determined. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Metal ion complex formation in small lakes of the Western Siberian Arctic zone

    Science.gov (United States)

    Kremleva, Tatiana; Dinu, Marina

    2017-04-01

    The paper is based on joint investigation of the Tyumen State University (Russia, Tyumen) and the Geochemistry and Analytical Chemistry Vernadsky Institute of Russian Academy of Sciences (Moscow, Russia) during 2012-2014 period. It presents the results of research of chemical composition of about 70 small lakes located in the area of tundra and northern taiga of West Siberia (Russia, Yamal-Nenets and Khanty-Mansi Autonomous Districts of the Tyumen region). The investigation includes determination of different parameters of natural water samples: • content of trace elements (Al, Fe, Mn, Cr, Cu, Ni, Zn, Cd, Co, Pb, etc., total more than 60 elements) by emission method with an inductively coupled plasma (ICP-MS) using mass spektrometrometre Element 2 equipment; • content of inorganic and total carbon (TIC and TC) by elemental analysis and the difference between the total and inorganic carbon gives the organic carbon content (TOC); • pH value by potentiometric method; • content of basic ions (Na+, Ca2+, K+, Mg2+, NH4+, Cl-, SO42-, NO3-, PO43-) by ion chromatography. Determination of the chemical composition of samples was conducted in the accredited laboratory according to standard procedures with regular quality control of results. Heavy metals in natural waters can exist in various forms: free (hydrated) ions bound in complexes with organic or inorganic ligands, as well as in the form of suspensions. The form of metal existence has a significant influence on their availability to transport in aquatic organisms. Metal ions associated in stable complexes with organic substances are considered less toxic. From the previous investigations state that the most stable complexes are ligands with organic ions Fe3+, Al3+. The main conclusion of the present research states that if the total content of aluminum, iron and manganese ions (meq/dm3) is equal to or greater than the concentration of dissolved organic carbon (TOC, mg/dm3) in lakes water other heavy metals will

  12. Potentiometric and spectrofluorimetric studies on complexation of tenoxicam with some metal ions.

    Science.gov (United States)

    Mohamed, Horria A; Wadood, Hanaa M A; Farghaly, Othman A

    2002-06-01

    The interaction of tenoxicam with six metal ions, viz. Fe(III), Bi(III), Sb(III), Cr(III), Cd(II) and Al(III) was studied using potentiometric and fluorimetric methods. In the potentiometric method the ionization constant of the ligand and stability constants of the complexes formed have been tabulated at 25+/-0.1 degrees C, ionic strength of NaNO3 in 50% (v/v) aqueous acetonitrile solution was 0.05 mol x dm(-3). Complexes of 1:1 and/or 1:2 and/or 1:3 metal to ligand ratios are formed. The fluorescence of tenoxicam in the presence and absence of the metal ions was studied. The drug can be determined fluorimetrically in 0.5 M HNO3 at an emission wavelength of 450 nm (excitation at 350 nm). The linear range is 0.040-0.2 microg/ml in the absence of Al(III) and 0.016-0.1 microg/ml in the presence of Al(III). Tenoxicam was determined by the proposed method in tablet, suppository and injection. The recovery percent ranged from 98.16 to 102.22%. The effect of 2-aminopyridine on the recovery of tenoxicam was also investigated.

  13. Electrospray droplet exposure to organic vapors: metal ion removal from proteins and protein complexes.

    Science.gov (United States)

    DeMuth, J Corinne; McLuckey, Scott A

    2015-01-20

    The exposure of aqueous nanoelectrospray droplets to various organic vapors can dramatically reduce sodium adduction on protein ions in positive ion mass spectra. Volatile alcohols, such as methanol, ethanol, and isopropanol lead to a significant reduction in sodium ion adduction but are not as effective as acetonitrile, acetone, and ethyl acetate. Organic vapor exposure in the negative ion mode, on the other hand, has essentially no effect on alkali ion adduction. Evidence is presented to suggest that the mechanism by which organic vapor exposure reduces alkali ion adduction in the positive mode involves the depletion of alkali metal ions via ion evaporation of metal ions solvated with organic molecules. The early generation of metal/organic cluster ions during the droplet desolvation process results in fewer metal ions available to condense on the protein ions formed via the charged residue mechanism. These effects are demonstrated with holomyoglobin ions to illustrate that the metal ion reduction takes place without detectable protein denaturation, which might be revealed by heme loss or an increase in charge state distribution. No evidence is observed for denaturation with exposure to any of the organic vapors evaluated in this work.

  14. Chitosan-transition metal ions complexes for selective arsenic(V) preconcentration.

    Science.gov (United States)

    Shinde, Rakesh N; Pandey, A K; Acharya, R; Guin, R; Das, S K; Rajurkar, N S; Pujari, P K

    2013-06-15

    Chitosan is naturally occurring bio-polymer having strong affinity towards transition metal ions. Chitosan complexed with transition metal ions takes up inorganic arsenic anions from aqueous medium. In present work, As(V) sorption in the chitosan complexed with different metal ions like Cu(II), Fe(III), La(III), Mo(VI) and Zr(IV) were studied. Sorptions of As(V) in CuS embedded chitosan, (3-aminopropyl) triethoxysilane (APTS) embedded chitosan, epichlorohydrin (ECH) crosslinked chitosan and pristine chitosan were also studied. (74)As radiotracer was prepared specifically for As(V) sorption studies by irradiation of natural germanium target with 18 MeV proton beam. The sorption studies indicated that Fe(III) and La(III) complexed with chitosan sorbed 95 ± 2% As(V) from aqueous samples in the pH range of 3-9. However, Fe(III)-chitosan showed better sorption efficiency (91 ± 2%) for As(V) from seawater than La(III)-chitosan (80 ± 2%). Therefore, Fe(III)-chitosan was selected to prepare the self-supported membrane and poly(propylene) fibrous matrix supported sorbent. The experimental As(V) sorption capacities of the fibrous and self-supported Fe(III)-chitosan sorbents were found to be 51 and 109 mg g(-1), respectively. These materials were characterized by XRD, SEM and EDXRF, and used for preconcentration of As(V) in aqueous media like tap water, ground water and seawater. To quantify the As(V) preconcentrated in Fe(III)-chitosan, the samples were subjected to instrumental neutron activation analysis (INAA) using reactor neutrons. As(V) separations were carried out using a two compartments permeation cell for the self-supported membrane and flow cell using the fibrous sorbent. The total preconcentration of arsenic content was also explored by converting As(III) to As(V). Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Metal Ion Binding at the Catalytic Site Induces Widely Distributed Changes in a Sequence Specific Protein-DNA Complex.

    Science.gov (United States)

    Sinha, Kaustubh; Sangani, Sahil S; Kehr, Andrew D; Rule, Gordon S; Jen-Jacobson, Linda

    2016-11-08

    Metal ion cofactors can alter the energetics and specificity of sequence specific protein-DNA interactions, but it is unknown if the underlying effects on structure and dynamics are local or dispersed throughout the protein-DNA complex. This work uses EcoRV endonuclease as a model, and catalytically inactive lanthanide ions, which replace the Mg 2+ cofactor. Nuclear magnetic resonance (NMR) titrations indicate that four Lu 3+ or two La 3+ cations bind, and two new crystal structures confirm that Lu 3+ binding is confined to the active sites. NMR spectra show that the metal-free EcoRV complex with cognate (GATATC) DNA is structurally distinct from the nonspecific complex, and that metal ion binding sites are not assembled in the nonspecific complex. NMR chemical shift perturbations were determined for 1 H- 15 N amide resonances, for 1 H- 13 C Ile-δ-CH 3 resonances, and for stereospecifically assigned Leu-δ-CH 3 and Val-γ-CH 3 resonances. Many chemical shifts throughout the cognate complex are unperturbed, so metal binding does not induce major conformational changes. However, some large perturbations of amide and side chain methyl resonances occur as far as 34 Å from the metal ions. Concerted changes in specific residues imply that local effects of metal binding are propagated via a β-sheet and an α-helix. Both amide and methyl resonance perturbations indicate changes in the interface between subunits of the EcoRV homodimer. Bound metal ions also affect amide hydrogen exchange rates for distant residues, including a distant subdomain that contacts DNA phosphates and promotes DNA bending, showing that metal ions in the active sites, which relieve electrostatic repulsion between protein and DNA, cause changes in slow dynamics throughout the complex.

  16. Metal Ion Binding at the Catalytic Site Induces Widely Distributed Changes in a Sequence Specific Protein–DNA Complex

    Science.gov (United States)

    2016-01-01

    Metal ion cofactors can alter the energetics and specificity of sequence specific protein–DNA interactions, but it is unknown if the underlying effects on structure and dynamics are local or dispersed throughout the protein–DNA complex. This work uses EcoRV endonuclease as a model, and catalytically inactive lanthanide ions, which replace the Mg2+ cofactor. Nuclear magnetic resonance (NMR) titrations indicate that four Lu3+ or two La3+ cations bind, and two new crystal structures confirm that Lu3+ binding is confined to the active sites. NMR spectra show that the metal-free EcoRV complex with cognate (GATATC) DNA is structurally distinct from the nonspecific complex, and that metal ion binding sites are not assembled in the nonspecific complex. NMR chemical shift perturbations were determined for 1H–15N amide resonances, for 1H–13C Ile-δ-CH3 resonances, and for stereospecifically assigned Leu-δ-CH3 and Val-γ-CH3 resonances. Many chemical shifts throughout the cognate complex are unperturbed, so metal binding does not induce major conformational changes. However, some large perturbations of amide and side chain methyl resonances occur as far as 34 Å from the metal ions. Concerted changes in specific residues imply that local effects of metal binding are propagated via a β-sheet and an α-helix. Both amide and methyl resonance perturbations indicate changes in the interface between subunits of the EcoRV homodimer. Bound metal ions also affect amide hydrogen exchange rates for distant residues, including a distant subdomain that contacts DNA phosphates and promotes DNA bending, showing that metal ions in the active sites, which relieve electrostatic repulsion between protein and DNA, cause changes in slow dynamics throughout the complex. PMID:27786446

  17. Chemodynamics of metal ion complexation by charged nanoparticles: a dimensionless rationale for soft, core-shell and hard particle types.

    Science.gov (United States)

    Duval, Jérôme F L

    2017-05-17

    Soft nanoparticulate complexants are defined by a spatial confinement of reactive sites and electric charges inside their 3D body. In turn, their reactivity with metal ions differs significantly from that of simple molecular ligands. A revisited form of the Eigen mechanism recently elucidated the processes leading to metal/soft particle pair formation. Depending on e.g. particle size and metal ion nature, chemodynamics of nanoparticulate metal complexes is controlled by metal conductive diffusion to/from the particles, by intraparticulate complex formation/dissociation kinetics, or by both. In this study, a formalism is elaborated to achieve a comprehensive and systematic identification of the rate-limiting step governing the overall formation and dissociation of nanoparticulate metal complexes. The theory covers the different types of spherical particulate complexants, i.e. 3D soft/permeable and core-shell particles, and hard particles with reactive sites at the surface. The nature of the rate-limiting step is formulated by a dynamical criterion involving a power law function of the ratio between particle radius and an intraparticulate reaction layer thickness defined by the key electrostatic, diffusional and kinetic components of metal complex formation/dissociation. The analysis clarifies the intertwined contributions of particle properties (size, soft or hard type, charge, density or number of reactive sites) and aqueous metal ion dehydration kinetics in defining the chemodynamic behavior of nanoparticulate metal complexes. For that purpose, fully parameterized chemodynamic portraits involving the defining features of particulate ligand and metal ion as well as the physicochemical conditions in the local intraparticulate environment, are constructed and thoroughly discussed under conditions of practical interest.

  18. General Synthesis of Transition-Metal Oxide Hollow Nanospheres/Nitrogen-Doped Graphene Hybrids by Metal-Ammine Complex Chemistry for High-Performance Lithium-Ion Batteries.

    Science.gov (United States)

    Chen, Jiayuan; Wu, Xiaofeng; Gong, Yan; Wang, Pengfei; Li, Wenhui; Mo, Shengpeng; Peng, Shengpan; Tan, Qiangqiang; Chen, Yunfa

    2018-02-09

    We present a general and facile synthesis strategy, on the basis of metal-ammine complex chemistry, for synthesizing hollow transition-metal oxides (Co 3 O 4 , NiO, CuO-Cu 2 O, and ZnO)/nitrogen-doped graphene hybrids, potentially applied in high-performance lithium-ion batteries. The oxygen-containing functional groups of graphene oxide play a prerequisite role in the formation of hollow transition-metal oxides on graphene nanosheets, and a significant hollowing process occurs only when forming metal (Co 2+ , Ni 2+ , Cu 2+ , or Zn 2+ )-ammine complex ions. Moreover, the hollowing process is well correlated with the complexing capacity between metal ions and NH 3 molecules. The significant hollowing process occurs for strong metal-ammine complex ions including Co 2+ , Ni 2+ , Cu 2+ , and Zn 2+ ions, and no hollow structures formed for weak and/or noncomplex Mn 2+ and Fe 3+ ions. Simultaneously, this novel strategy can also achieve the direct doping of nitrogen atoms into the graphene framework. The electrochemical performance of two typical hollow Co 3 O 4 or NiO/nitrogen-doped graphene hybrids was evaluated by their use as anodic materials. It was demonstrated that these unique nanostructured hybrids, in contrast with the bare counterparts, solid transition-metal oxides/nitrogen-doped graphene hybrids, perform with significantly improved specific capacity, superior rate capability, and excellent capacity retention. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Can metal ion complexes be used as polarizing agents for solution DNP? A theoretical discussion.

    Science.gov (United States)

    Luchinat, Claudio; Parigi, Giacomo; Ravera, Enrico

    2014-04-01

    Dynamic nuclear polarization (DNP) can be used to dramatically increase the NMR signal intensities in solutions and solids. DNP is usually performed using nitroxide radicals as polarizing agents, characterized by sharp EPR lines, fast rotation, fast diffusion, and favorable distribution of the unpaired electron. These features make the nitroxide radicals ideally suited for solution DNP. Here, we report some theoretical considerations on the different behavior of some inorganic compounds with respect to nitroxide radicals. The relaxation profiles of slow relaxing paramagnetic metal aqua ions [copper(II), manganese(II), gadolinium(III) and oxovanadium(IV)] and complexes have been re-analyzed according to the standard theory for dipolar and contact relaxation, in order to estimate the coupling factor responsible for the maximum DNP enhancement that can be achieved in solution and its dependence on field, temperature and relative importance of outer-sphere versus inner-sphere relaxation.

  20. The impact of metal transport processes on bioavailability of free and complex metal ions in methanogenic granular sludge

    NARCIS (Netherlands)

    Bartacek, J.; Fermoso, F.G.; Vergeldt, F.; Gerkema, E.; Maca, J.; As, van H.; Lens, P.N.L.

    2012-01-01

    Bioavailability of metals in anaerobic granular sludge has been extensively studied, because it can have a major effect on metal limitation and metal toxicity to microorganisms present in the sludge. Bioavailability of metals can be manipulated by bonding to complexing molecules such as

  1. Coordination kinetics of different metal ions with the amidoximated polyacrylonitrile nanofibrous membranes and catalytic behaviors of their complexes

    Energy Technology Data Exchange (ETDEWEB)

    Li, Fu; Dong, Yong Chun; Kang, Wei Min; Cheng, Bowen; Qu, Xiang; Cui, Guixin [School of Textiles, Tianjin Polytechnic University, Tianjin (China)

    2016-12-15

    Two transition metal ions (Fe{sup 3+} and Cu{sup 2+}) and a rare earth metal ion (Ce{sup 3+}) were selected to coordinate with amidoximated polyacrylonitrile (PAN) nanofibrous membrane for preparing three metal modified PAN nanofibrous membrane complexes (M-AO-n-PANs, M = Fe, Cu, or Ce) as the heterogeneous Fenton catalysts for the dye degradation in water under visible irradiation. The coordination kinetics of three metal ions with modified PAN nanofibrous membranes was studied and the catalytic properties of the resulting complexes were also compared. The results indicated that increasing metal ion concentrations in solution or higher coordination temperature led to a significant increase in metal content, particularly in Fe and Cu contents of the complexes. Their coordination process could be described using Langmuir isotherm and pseudo-second-order kinetic equations. Moreover, Fe-AO-n-PAN had the best photocatalytic efficiency for the dye degradation in acidic medium, but a lower photocatalytic activity than Cu-AO-n-PAN in alkali medium.

  2. Analysis of triacetone triperoxide complexes with alkali metal ions by electrospray and extractive electrospray ionisation combined with ion mobility spectrometry and mass spectrometry.

    Science.gov (United States)

    Hill, Alex R; Edgar, Mark; Chatzigeorgiou, Maria; Reynolds, James C; Kelly, Paul F; Creaser, Colin S

    2015-01-01

    The complexation of triacetone triperoxide (TATP) with a range of alkali metals has been studied by electrospray ionisation-mass spectrometry yield [M+Cat](+) ions for all of the alkali metals. The formation of [2TATP+Li+LiX](+) (X = Br, Cl) sandwich complexes was also observed. Collision cross- sections for the lithium-containing complexes of TATP were measured by travelling wave ion mobility spectrometry mass spectrometry, and compared well with computationally determined structures. Extractive electrospray ionisation (EESI) using a lithium doped electrospray is demonstrated for the detection of TATP vapours desorbed from a metal surface. The limit of detection for EESI was shown to be 20 ng using the [TATP+Li](+) ion.

  3. Solid State Structures of Alkali Metal Ion Complexes Formed by Low-Molecular-Weight Ligands of Biological Relevance.

    Science.gov (United States)

    Aoki, Katsuyuki; Murayama, Kazutaka; Hu, Ning-Hai

    2016-01-01

    This chapter provides structural data, mainly metal binding sites/modes, observed in crystal structures of alkali metal ion complexes containing low-molecular-weight ligands of biological relevance, mostly obtained from the Cambridge Structural Database (the CSD version 5.35 updated to February 2014). These ligands include (i) amino acids and small peptides, (ii) nucleic acid constituents (excluding quadruplexes and other oligonucleotides), (iii) simple carbohydrates, and (iv) naturally occurring antibiotic ionophores. For some representative complexes of these ligands, some details on the environment of the metal coordination and structural characteristics are described.

  4. Metal ion-assisted self-assembly of complexes for controlled and sustained release of minocycline for biomedical applications

    International Nuclear Information System (INIS)

    Zhang, Zhiling; Wang, Zhicheng; Nong, Jia; Nix, Camilla A; Zhong, Yinghui; Ji, Hai-Feng

    2015-01-01

    This study reports the development of novel drug delivery complexes self-assembled by divalent metal ion-assisted coacervation for controlled and sustained release of a hydrophilic small drug molecule minocycline hydrochloride (MH). MH is a multifaceted agent that has demonstrated therapeutic effects in infection, inflammation, tumor, as well as cardiovascular, renal, and neurological disorders due to its anti-microbial, anti-inflammatory, and cytoprotective properties. However, the inability to translate the high doses used in experimental animals to tolerable doses in human patients limits its clinical application. Localized delivery can potentially expose the diseased tissue to high concentrations of MH that systemic delivery cannot achieve, while minimizing the side effects from systemic exposure. The strong metal ion binding-assisted interaction enabled high drug entrapment and loading efficiency, and stable long term release for more than 71 d. Released MH demonstrated potent anti-biofilm, anti-inflammatory, and neuroprotective activities. Furthermore, MH release from the complexes is pH-sensitive as the chelation between minocycline and metal ions decreases with pH, allowing ‘smart’ drug release in response to the severity of pathology-induced tissue acidosis. This novel metal ion binding-mediated drug delivery mechanism can potentially be applied to other drugs that have high binding affinity for metal ions and may lead to the development of new delivery systems for a variety of drugs. (paper)

  5. Redox-inactive metal ions promoted the catalytic reactivity of non-heme manganese complexes towards oxygen atom transfer.

    Science.gov (United States)

    Choe, Cholho; Yang, Ling; Lv, Zhanao; Mo, Wanling; Chen, Zhuqi; Li, Guangxin; Yin, Guochuan

    2015-05-21

    Redox-inactive metal ions can modulate the reactivity of redox-active metal ions in a variety of biological and chemical oxidations. Many synthetic models have been developed to help address the elusive roles of these redox-inactive metal ions. Using a non-heme manganese(II) complex as the model, the influence of redox-inactive metal ions as a Lewis acid on its catalytic efficiency in oxygen atom transfer was investigated. In the absence of redox-inactive metal ions, the manganese(II) catalyst is very sluggish, for example, in cyclooctene epoxidation, providing only 9.9% conversion with 4.1% yield of epoxide. However, addition of 2 equiv. of Al(3+) to the manganese(II) catalyst sharply improves the epoxidation, providing up to 97.8% conversion with 91.4% yield of epoxide. EPR studies of the manganese(II) catalyst in the presence of an oxidant reveal a 16-line hyperfine structure centered at g = 2.0, clearly indicating the formation of a mixed valent di-μ-oxo-bridged diamond core, Mn(III)-(μ-O)2-Mn(IV). The presence of a Lewis acid like Al(3+) causes the dissociation of this diamond Mn(III)-(μ-O)2-Mn(IV) core to form monomeric manganese(iv) species which is responsible for improved epoxidation efficiency. This promotional effect has also been observed in other manganese complexes bearing various non-heme ligands. The findings presented here have provided a promising strategy to explore the catalytic reactivity of some di-μ-oxo-bridged complexes by adding non-redox metal ions to in situ dissociate those dimeric cores and may also provide clues to understand the mechanism of methane monooxygenase which has a similar diiron diamond core as the intermediate.

  6. Calculation of formation constants of single-charged complex ions of bivalent metals in solutions

    International Nuclear Information System (INIS)

    Allakhverdov, G.R.

    1985-01-01

    A new method for calculating formation constants of complexes of bivalent metals in solutions is suggested. The method is based on using relations characterizing concentration dependence of activity factors and theis interrelation with osmotic coefficients. It is shown that the results of formation constant calculations of complexes MX + (M-Mg, Ca, Sr, Ba, Cd, Co, Zn, Ni, Fe, Mn, Cu; X-Cl, Br, I, NOΛ3) performed with a computer using experimental data in the 0.1-0.5 m(m-molality) concentration range, are in satisfactory agreement with literature data obtained by various research methods. It is established that for all metals the stability of halide complexes drops in the MCl + >MBr + >MI + series. In the series of complexes formed by alkaline earth metals, the complexes stability grows with increase of metal atomic number

  7. Synthesis, physico-chemical characterization and biological activity of 2-aminobenzimidazole complexes with different metal ions

    Directory of Open Access Journals (Sweden)

    Podunavac-Kuzmanović Sanja O.

    2004-01-01

    Full Text Available Complexes of 2-aminobenzimidazole (L with nitrates of cobalt(II nickel(II, copper (II, zinc(II and silver(I were synthesized. The molar ratio metal:ligand in the reaction of the complex formation was 1:2. It should be noticed, that the reaction of all the metal salts yielded bis(ligand complexes of the general formula M(L2(NO32 × nH2O (M=Co, Ni Cu, Zn or Ag; n=0, 1, 2 or 6. The complexes were characterized by elemental analysis of the metal, molar conductivity, magnetic susceptibility measurements and IR spectra. Co(II, Ni(II and Cu(II complexes behave as non-electrolytes, whilst Zn(II and Ag(I are 1:1 electrolytes. Cu(II complex has a square-planar stereochemistry, Ag(I complex is linear, whilst the Co(II, Ni(II and Zn(II complexes have a tetrahedral configuration. In all the complexes ligand is coordinated by participation of the pyridine nitrogen of the benzimidazole ring. The antimicrobial activity of the ligand and its complexes against Pseudomonas aeruginosa, Bacillus sp. Staphylococcus aureus and Saccharomyces cerevisiae was investigated. The effect of metal on the ligand antimicrobial activity is discussed.

  8. Cleavage reactions of the complex ions derived from self-complementary deoxydinucleotides and alkali-metal ions using positive ion electrospray ionization with tandem mass spectrometry.

    Science.gov (United States)

    Xiang, Yun; Abliz, Zeper; Takayama, Mitsuo

    2004-05-01

    The dissociation reactions of the adduct ions derived from the four self-complementary deoxydinucleotides, d(ApT), d(TpA), d(CpG), d(GpC), and alkali-metal ions were studied in detail by positive ion electrospray ionization multiple-stage mass spectrometry (ESI-MS(n)). For the [M + H](+) ions of the four deoxydinucleotides, elimination of 5'-terminus base or loss of both of 5'-terminus base and a deoxyribose were the major dissociation pathway. The ESI-MS(n) spectra showed that Li(+), Na(+), and Cs(+) bind to deoxydinucleotides mainly by substituting the H(+) of phosphate group, and these alkali-metal ions preferred to bind to pyrimidine bases rather than purine bases. For a given deoxydinucleotide, the dissociation pathway of [M + K](+) ions differed clearly from that of [M + Li](+), [M + Na](+), and [M + Cs](+) ions. Some interesting and characteristic cleavage reactions were observed in the product-ion spectra of [M + K](+) ions, including direct elimination of deoxyribose and HPO(3) from molecular ions. The fragmentation behavior of the [M + K](+) and [M + W](+) (W = Li, Na, Cs) adduct ions depend upon the sequence of bases, the interaction between alkali-metal ions and nucleobases, and the steric hindrance caused by bases.

  9. Characterization of Anthraquinone-DerivedRedox Switchable Ionophores and Their Complexes with Li+, Na+, K+, Ca+, and Mg+ Metal Ions

    Directory of Open Access Journals (Sweden)

    Vaishali Vyas

    2011-01-01

    Full Text Available Anthraquinone derived redox switchable ionophores 1,5 bis (2-(2-(2-ethoxy ethoxy ethoxyanthracene-9,10-dione (V1 and 1,8-bis(2-(2-(2-ethoxyethoxyethoxy anthracene—9,10-dione (V2 have been used for isolation, extraction and liquid membrane transport studies of Li+, Na+, K+, Ca2+ and Mg2+ metal ions. These isolated complexes were characterized by melting point determination, CV and IR, 1H NMR spectral analysis. Ionophore V2 shows maximum shift in reduction potential (ΔE with Ca(Pic2. The observed sequence for the shifting in reduction potential (ΔE between V2 and their complexes is V2 calcium picrate (42 mV > V2 potassium picrate (33 mV > V2 lithium picrate (25 mV > V2 sodium picrate (18 mV > V2 magnesium picrate (15 mV. These findings are also supported by results of extraction, back extraction and transport studies. Ionophore V2 complexed with KPic and showed much higher extractability and selectivity towards K+ than V1. These synthetic ionophores show positive and negative cooperativity towards alkali and alkaline earth metal ions in reduced and oxidized state. Hence, this property can be used in selective separation and enrichment of metal ions using electrochemically driven ion transport.

  10. Assembling Metal Ions Induced Cyanide-Bridged Heterometallic 1D and Ion-Pair Complexes: Synthesis, Crystal Structures and Magnetic Properties

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Lingqian [Liaocheng Univ., Liaocheng (China); Zhao, Zengdian; Chen, Kexun; Wang, Ping; Zhang, Daopeng [Shandong Univ. of Technology, Zibo (China)

    2013-07-15

    We obtained a heterobimetallic one-dimensional cyanide-bridged Mn(II)-Ni(II) complex and an Co(III)-Ni(II) ion-pair complex with [Ni(CN){sub 4}]{sup 2-} as building block and M(II)-phenanthroline (M = Mn, Co) compounds as assembling segment. The different structural types of complexes 1 and 2 indicate that the property of the metal ions the assembling segment contained have obvious influence on the structure of the cyanide-bridged complex. Investigation over the magnetic properties of complex 1 reveals an overall weak antiferromagnetic coupling between the adjacent Mn(II) ions bridged by the antiferromagnetic [-NC-Ni-CN-] unit. Among of all the molecular magnetism systems, for the well known reasons, cyanide-containing complexes have been widely employed as bridges to assemble homo/hetero-metallic molecular magnetic materials by using the cyanide bridge transferring magnetic coupling between the neighboring paramagnetic ions, in whichsome showed interesting magnetic properties, such as high-Tc magnets, spin crossover materials, single-molecule magnets (SMMs) and single-chain magnets (SCMs)

  11. Ion implantation in metals

    International Nuclear Information System (INIS)

    Vook, F.L.

    1977-02-01

    The application of ion beams to metals is rapidly emerging as a promising area of research and technology. This report briefly describes some of the recent advances in the modification and study of the basic properties of metals by ion implantation techniques. Most of the research discussed illustrates some of the new and exciting applications of ion beams to metals which are under active investigation at Sandia Laboratories, Albuquerque

  12. Roles of metal ion complexation and membrane permeability in the metal flux through lipophilic membranes. Labile complexes at permeation liquid membranes

    NARCIS (Netherlands)

    Zhang, Z.; Buffle, J.; Leeuwen, van H.P.; Wojciechowski, K.

    2006-01-01

    The various physicochemical factors that influence the flux of carrier-transported metal ions through permeation liquid membranes (PLM) are studied systematically. Understanding PLM behavior is important (i) to optimize the application of PLM as metal speciation sensors in environmental media and

  13. Alkali Metal Ion Complexes with Phosphates, Nucleotides, Amino Acids, and Related Ligands of Biological Relevance. Their Properties in Solution.

    Science.gov (United States)

    Crea, Francesco; De Stefano, Concetta; Foti, Claudia; Lando, Gabriele; Milea, Demetrio; Sammartano, Silvio

    2016-01-01

    Alkali metal ions play very important roles in all biological systems, some of them are essential for life. Their concentration depends on several physiological factors and is very variable. For example, sodium concentrations in human fluids vary from quite low (e.g., 8.2 mmol dm(-3) in mature maternal milk) to high values (0.14 mol dm(-3) in blood plasma). While many data on the concentration of Na(+) and K(+) in various fluids are available, the information on other alkali metal cations is scarce. Since many vital functions depend on the network of interactions occurring in various biofluids, this chapter reviews their complex formation with phosphates, nucleotides, amino acids, and related ligands of biological relevance. Literature data on this topic are quite rare if compared to other cations. Generally, the stability of alkali metal ion complexes of organic and inorganic ligands is rather low (usually log K  Na(+) > K(+) > Rb(+) > Cs(+). For example, for citrate it is: log K ML = 0.88, 0.80, 0.48, 0.38, and 0.13 at 25 °C and infinite dilution. Some considerations are made on the main aspects related to the difficulties in the determination of weak complexes. The importance of the alkali metal ion complexes was also studied in the light of modelling natural fluids and in the use of these cations as probes for different processes. Some empirical relationships are proposed for the dependence of the stability constants of Na(+) complexes on the ligand charge, as well as for correlations among log K values of NaL, KL or LiL species (L = generic ligand).

  14. Tunicate-Inspired Gallic Acid/Metal Ion Complex for Instant and Efficient Treatment of Dentin Hypersensitivity.

    Science.gov (United States)

    Prajatelistia, Ekavianty; Ju, Sung-Won; Sanandiya, Naresh D; Jun, Sang Ho; Ahn, Jin-Soo; Hwang, Dong Soo

    2016-04-20

    Dentin hypersensitivity is sharp and unpleasant pains caused by exposed dentinal tubules when enamel outside of the tooth wears away. The occlusion of dentinal tubules via in situ remineralization of hydroxyapatite is the best method to alleviate the symptoms caused by dentin hypersensitivity. Commercially available dental desensitizers are generally effective only on a specific area and are relatively toxic, and their performance usually depends on the skill of the clinician. Here, a facile and efficient dentin hypersensitivity treatment with remarkable aesthetic improvement inspired by the tunicate-self-healing process is reported. As pyrogallol groups in tunicate proteins conjugate with metal ions to heal the torn body armor of a tunicate, the ingenious mechanism by introducing gallic acid (GA) as a cheap, abundant, and edible alternative to the pyrogallol groups of the tunicate combined with a varied daily intake of metal ion sources is mimicked. In particular, the GA/Fe(3+) complex exhibits the most promising results, to the instant ≈52% blockage in tubules within 4 min and ≈87% after 7 d of immersion in artificial saliva. Overall, the GA/metal ion complex-mediated coating is facile, instant, and effective, and is suggested as an aesthetic solution for treating dentin hypersensitivity. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Ion chromatography of transition metals: specific alteration of retention by complexation reactions in the mobile and on the stationary phase

    International Nuclear Information System (INIS)

    Baumgartner, S.

    1992-05-01

    Ion chromatography of mono- and bivalent cations was performed on a conventional cation exchanger. The pH influence of an ethylene-diamine/citrate eluent was significant for the retention of alkaline earth and transition metals, but negligible for alkali ions. This was dealt with from a mechanistic point of view. Mobile phase optimization allowed fast isocratic analysis of mono- and bivalent cations and the separation of the radionuclides Cs-137 and Sr-90. A newly synthesized stationary phase containing iminodiacetate (IDA) function was investigated for cation chromatography using ethylenediamine/citrate eluents, polyhydroxy acid and dipicolinic acid. The column's high selectivity for transition metal ions in comparison to alkali and alkaline earth metals may be governed by the choice of complexing ability and pH of the eluent. Applications verified by atomic absorption spectroscopy include alkaline earth metals in beverages and the determination of Co, Cd and Zn in solutions containing more than 10 14 -fold excess of Na and Mg, such as sea water

  16. Complexation induced phase separation: preparation of composite membranes with a nanometer thin dense skin loaded with metal ions

    KAUST Repository

    Villalobos Vazquez de la Parra, Luis Francisco

    2015-04-21

    We present the development of a facile phase-inversion method for forming asymmetric membranes with a precise high metal ion loading capacity in only the dense layer. The approach combines the use of macromolecule-metal intermolecular complexes to form the dense layer of asymmetric membranes with nonsolvent-induced phase separation to form the porous support. This allows the independent optimization of both the dense layer and porous support while maintaining the simplicity of a phase-inversion process. Moreover, it facilitates control over (i) the thickness of the dense layer throughout several orders of magnitude—from less than 15 nm to more than 6 μm, (ii) the type and amount of metal ions loaded in the dense layer, (iii) the morphology of the membrane surface, and (iv) the porosity and structure of the support. This simple and scalable process provides a new platform for building multifunctional membranes with a high loading of well-dispersed metal ions in the dense layer.

  17. Effect of heavy metal ions and zinc complex on the dynamics of growth of bacteria Pseudomonas

    Directory of Open Access Journals (Sweden)

    A. V. Krysenko

    2012-03-01

    Full Text Available The problem of wastewater treatment is one of the most pressing issues from the beginning of the century. A special roleof the heavy metals in the pollution of the environment is due to their bioaccumulation, transfer through trophic chains, and high toxicity. Currently, advanced technologies for the wastewater treatment had been developed. Natural and cheap biological treatment methods of intensification of the natural processes of organic compounds decomposition by microorganisms under aerobic or anaerobic conditions are promising. Amongimportant processes are nitrification and denitrification. That’s why a great attention is paid to the microorganisms that are capable to realize these processes. The processes of interaction of the heavy metals ions and microorganisms are of great interest not only from the standpoint of basic science, but also as a possible use in biotechnological processes.

  18. Complex Metal Hydrides for hydrogen storage and solid-state ion conductors

    DEFF Research Database (Denmark)

    Payandeh GharibDoust, SeyedHosein

    Renewable energy, such as sun and wind, are sustainable and clean sources of energy for the future but are unevenly distributed both over time and geographically. Therefore, this type of energy must be converted to a form that can be stored and two of the most promising options are hydrogen...... and electricity in batteries. However, both hydrogen and electricity must be stored in a very dense way to be useful, e.g. for mobile applications. Complex metal hydrides have high hydrogen density and have been studied during the past twenty years in hydrogen storage systems. Moreover, they have shown high ionic...... conductivities which promote their application as solid electrolytes in batteries. This dissertation presents the synthesis and characterization of a variety of complex metal hydrides and explores their hydrogen storage properties and ionic conductivity. Five halide free rare earth borohydrides RE(BH4)3, (RE...

  19. New 14-membered octaazamacrocyclic complexes of divalent transition metal ions with their antimicrobial and spectral studies

    Science.gov (United States)

    Singh, D. P.; Kumar, Krishan; Sharma, Chetan

    2010-01-01

    A novel series of macrocyclic complexes of the type [M(C 18H 14N 10S 2)X 2]; where M = Co(II), Ni(II), Cu(II), Zn(II) and Cd(II); X = Cl -, NO 3-, CH 3COO - has been synthesized by [2+2] condensation of thiocarbohydrazide and isatin in the presence of divalent metal salts in methanolic medium. The complexes have been characterized with the help of elemental analyses, conductance measurements, magnetic measurements, electronic, NMR and infrared spectral studies. The low value of molar conductance indicates them to be non-electrolytes. On the basis of various studies a distorted octahedral geometry may be proposed for all of these complexes. These metal complexes were also tested for their in vitro antimicrobial activities against some Gram-positive bacteria viz. Staphylococcus aureus, Bacillus subtilis, and some Gram-negative bacteria Escherichia coli, Pseudomonas aeruginosa and some fungal strains Aspergillus niger, Aspergillus flavus (molds), Candida albicans, Saccharomyces cerevisiae (yeasts). The results obtained were compared with standard antibiotic: Ciprofloxacin and the standard antifungal drug: Amphotericin-B.

  20. A control on hydrophobic and hydrophilic interactions between HEWL and metal Schiff-base complexes comprising of different metal ions and ligands

    Energy Technology Data Exchange (ETDEWEB)

    Koley Seth, Banabithi; Ray, Aurkie; Basu, Samita, E-mail: samita.basu@saha.ac.in

    2015-05-15

    The structural effects of different copper(II) and nickel(II) Schiff base complexes on hen egg white lysozyme (HEWL) have been investigated through steady state and time resolved absorption and fluorescence, and circular dichroism spectroscopy. The Schiff base ligands with N{sub 4} donor atoms show both hydrophobic and hydrophilic interactions, however hydrophilic interaction prevails with ligands having N{sub 2}O{sub 2} donor atoms. Variation of metal ions from Cu{sup 2+} to Ni{sup 2+} with each type of Schiff base ligand increases the probability of hydrophilic over hydrophobic interactions, which supports their significance in regulating the binding affinity between HEWL and metal complexes. On photo-excitation the complexes comprising of Cu{sup 2+} ion instead of Ni{sup 2+} ion and ligands with N{sub 4} donor system rather than N{sub 2}O{sub 2} donor system, increases the probability of intersystem crossing to populate the corresponding triplet state as observed from laser flash photolysis study. The better binding affinity of nickel complexes with different selectivities compared to copper complexes towards HEWL emphasizes the potentiality of less explored nickel complexes in drug–protein interactions. - Highlights: • Ni{sup II} and Cu{sup II} -Schiff base complexes bind hen egg white lysozyme spontaneously. • Both hydrophobic and hydrophilic interactions are effective for N{sub 4} ligands. • For N{sub 2}O{sub 2} ligands the hydrophilic is predominant over hydrophobic interaction. • Binding affinity and selectivity of Ni{sup II}-complexes are better than Cu{sup II}-complexes. • Replacement of Cu{sup 2+} by Ni{sup 2+} in a ligand enhances chance of hydrophilic interaction.

  1. Complex-forming organic ligands in cloud-point extraction of metal ions: a review.

    Science.gov (United States)

    Pytlakowska, K; Kozik, V; Dabioch, M

    2013-06-15

    Cloud-point extraction (CPE), an easy, safe, environmentally friendly, rapid and inexpensive methodology for preconcentration and separation of trace metals from aqueous solutions has recently become an attractive area of research and an alternative to liquid-liquid extraction. Moreover, it provides results comparable to those obtained with other separation techniques and has a greater potential to be explored in improving detection limits and other analytical characteristics over other methods. A few reviews have been published covering different aspects of the CPE procedure and its relevant applications, such as the phenomenon of clouding, the application in the extraction of trace inorganic and organic materials, as well as pesticides and protein substrates from different sources, or incorporation of CPE into an FIA system. This review focuses on general properties of the most frequently used organic ligands in cloud-point extraction and on literature data (from 2000 to 2012) concerning the use of modern techniques in determination of metal ions' content in various materials. The article is divided according to the class of organic ligands to be used in CPE. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Synthesis, Metal Ion Complexation and Computational Studies of Thio Oxocrown Ethers

    Directory of Open Access Journals (Sweden)

    Ahmet Yıldız

    2011-10-01

    Full Text Available The synthesis of some thio-oxocrown ether ligands, B1 (1,4-dithio-12-crown-4, B2 (1,7-dithio-12-crown-4, B3 (1,7-dithio-15-Crown-5, B4 (1,7-dithio-18-crown-6, B5 (1,10-dithio-18-crown-6, B6 (1,10-dithio-21-crown-7, under mild conditions, were reported. The ligands were characterized by FT-IR, 1H NMR and GC-MS spectroscopy. The formation of 1:1 ligand complexes with a variety of metal salts (Ag+, Ca+2, K+, Na+, Mg+2, Zn+2 and Fe+2 were investigated by a conductometric method in a 1:1 dioxane–water system at 25 °C, and the complexation constants (Ke = (ΛMAm -Λ / ((Λ-ΛMaΛbAm [L] and free energy (∆Go= - RT lnKe values are calculated. Details of the specific molecular interactions between the ligands and metals were proposed. We also performed DFT calculations to explain their geometrical properties, charges and frontier molecular orbitals.

  3. Synthesis, Characterization and Spectral Studies of Noble Heterobinuclear Complexes of Transition Metal Ions and their Biological Activity

    Directory of Open Access Journals (Sweden)

    Netra Pal Singh

    2011-01-01

    Full Text Available Some noble heterobinuclear complexes of transition metal ions with bis(salicylaldehydemalonyl-dihydrazone in the presence of 5-nitroindazole Cu(II / Ni(II- chloride of the type [ML1M‘L2Cl2] or [ML1FeL2Cl2]Cl, where M = Ni(II, Cu(II and M' = Mn(II, Co(II, have been prepared. All the complexes have been characterized by IR, UV vis and EPR spectroscopy, elemental analysis, magnetic moment and molar conductance measurement. Spectral studies and magnetic moment measurement in DMF suggest the covalent nature of the complexes, except the [ML1FeL2Cl2]Cl complex which is 1:1 electrolyte. An octahedral geometry is proposed for M‘ and square planer for M for the heterobinuclear complexes. The low value of magnetic moment and overlapping EPR signals are due to spin crossover since both of the metals have unpaired electrons with same molecular symmetry. The lowering of the magnetic moment has been discussed. The biological activity (antifungal and antibacterial of the represented compounds has been studied.

  4. Studies on coordination chemistry and bioactivity of complexes of a tridentate ONS Schiff base with some heavier transition metal ions

    International Nuclear Information System (INIS)

    Tarafder, M.T.H.; Tan Mei Lin; Ali, A.M.

    2003-09-01

    A tridentate Schiff base, S-benzyl-β-N-(2-hydroxyphenyl)methylenedithiocarbazate, (HONSH), with a donor sequence of ONS, was synthesized from the condensation of S-benzyldithiocarbazate (SBDTC) with an equimolar amount of 2-hydroxybenzaldehyde in absolute ethanol. The reactions of HONSH with metal ions [La(III), Ce(IV) and Th(IV)] yielded complexes of compositions, [La(ONS)NO 3 .2H 2 O], [Ce(ONS)(NO 3 ) 2 ] and [Th(ONS) 2 ]. The ligands and the complexes were characterized from elemental analyses and spectroscopic measurements. The metal complexes were found to be active against colon cancer cell lines with the CD 50 values of 27.5, 28.4 and 19.3 μg/ml for the La(III), Ce(FV) and Th(IV) complexes, respectively. The La(IH) complex was found to be very active against leukemic cell lines with the CD 50 value of 6.8 μg/ml. (author)

  5. Complexation humic substances of soils with metal ions as the main way migration of matals from soil to water

    Science.gov (United States)

    Dinu, Marina

    2013-04-01

    Organic matter (OM) of natural waters can bind with the ions metals (IM) entering the system, thus reducing their toxic properties. OM in water consists predominantly (up to 80%) of humic acids (HA), represented by highmolecular, dyed, polyfunctional compounds. The natural-climatic zones feature various ratios of fulvic (FA) and humic acids. An important specific feature of metals as contamination elements is the fact that when they occur in the environment, their potential toxicity and bioavailability depend significantly on their speciation. In recent years, lakes have been continuously enriched in hazardous elements such as Pb, Cd, Al, and Cr on a global (regional) basis. The most important organic ligands are humic matter (HM) washed out from soils in water and metals occur in natural waters as free ions, simple complexes with inorganic and organic ligands, and mineral and organic particles of molecules and ions sorbed on the surface. The occurrence of soluble metal forms in natural waters depends on the presence of organic and inorganic anions. However, direct determinations are rather difficult. The goal was the calculation and analysis of the forms of metals in the system catchment basin, based on the chemical composition of the water body and the structural features of soil humic substances (HS).We used the following analytical techniques - leaching of humic substances from soil and sample preparation (Orlov DS, 1985), the functional characteristics of humic substances - spectral analysis methods, the definition of conditional stability constants of complexes - electrochemical methods of analysis. Our results show thet HAs of selected soil types are different in functions, and these differences effect substantially the complexing process. When analyzing the results obtained in the course of spectrometric investigation of HMs in selected soil types, we determined the following main HA characteristics: (1) predominance of oxygen bearing groups in HM of the

  6. Solution equilibrium of metal ions-binary complexes with 3-(2-ethylamino-1-hydroxyethyl] phenol (Effortil

    Directory of Open Access Journals (Sweden)

    Mohamed Magdy Khalil

    2016-11-01

    Full Text Available Formation of binary complexes of Al(III, Cr(III, Fe(III, Th(IV, UO2(II, Ce(III, La(III, and Gd(III with 3-(2-ethylamino-1-hydroxyethyl] phenol (Effortil were studied potentiometrically at 37.0 °C and I = 0.16 mol dm−3 NaNO3 in aqueous solution. The acid–base properties of Effortil were investigated and discussed. The order of stability of the complexes was investigated and is discussed in terms of the metal ion. The experimental pH titration data were analyzed in order to evaluate the formation constants of various intermediate species formed. The concentration distribution of various species formed in solution was evaluated.

  7. Extraction of different-ligand metal complexes by chlorofOrm in the presence of 15-crown-5 and picpate ion

    International Nuclear Information System (INIS)

    Nazarenko, A.Yu.; Pyatnitskij, I.V.; Nizhnik, Z.Z.

    1983-01-01

    Extraction of complexes of alkaline metals, thallium, silver, strontium and lead by chloroform in the presence of 15-crown-5 and picrate ion is studied The extraction constants are determined spectrophotometrically. It is found that in chloroform the metal- picrate contact ion pairs are formed with the structure diffeping depending on the metal ion radius and charge. The composition of the extracted complexes was determined by equilibrium shift method. At low (less than 5x10 -3 mol/l) 15-crown-5 concentrations singlycharged cations are extracted in the form of the MLA complexes (where L is 15-crown-5, A is picrate) and doubly-charged ones in the form of MLA 2 . At a higher 15-crown-5 concentrations the MLA 2 complex extraction is also observed

  8. Metal Ion Controlled Polymorphism of a Peptide

    DEFF Research Database (Denmark)

    Hemmingsen, Lars Bo Stegeager; Jancso, Attila; Szunyogh, Daniel

    2011-01-01

    , …) in the peptide, and the ligand and structural preferences of the metal ion (in our studies Zn2+, Cd2+, Hg2+, Cu+/2+). Simultaneously, new species such as metal ion bridged ternary complexes or even oligomers may be formed. In recent previous studies we have observed similar polymorphism of zinc finger model...

  9. Application of equilibrium binding model for analysis of conformational transitions in poly(rA)poly(rU) complexes with metal ions

    OpenAIRE

    Sorokin V. A.; Gladchenko G. O.; Usenko E. L.; Egupov S. A.; Blagoi Yu. P.

    2010-01-01

    Aim. The study is aimed at generalization of the previous experimental results on the metal ion (Mg2+, Ni2+, Cd2+) effects on conformation transitions in poly(rA)·poly(rU). The objective was to find out how the type of a metal ion-polynucleotide complex influences the phase transitions and to estimate the constants (K) of ions binding to polymers of different structures. Methods. The K values were obtained upon theoretical and experimental transition temperature fitting by the least-square me...

  10. Quantifying the binding strength of salicylaldoxime-uranyl complexes relative to competing salicylaldoxime-transition metal ion complexes in aqueous solution: a combined experimental and computational study.

    Science.gov (United States)

    Mehio, Nada; Ivanov, Alexander S; Williams, Neil J; Mayes, Richard T; Bryantsev, Vyacheslav S; Hancock, Robert D; Dai, Sheng

    2016-05-31

    The design of new ligands and investigation of UO2(2+) complexations are an essential aspect of reducing the cost of extracting uranium from seawater, improving the sorption efficiency for uranium and the selectivity for uranium over competing ions (such as the transition metal cations). The binding strengths of salicylaldoxime-UO2(2+) complexes were quantified for the first time and compared with the binding strengths of salicylic acid-UO2(2+) and representative amidoxime-UO2(2+) complexes. We found that the binding strengths of salicylaldoxime-UO2(2+) complexes are ∼2-4 log β2 units greater in magnitude than their corresponding salicylic acid-UO2(2+) and representative amidoxime-UO2(2+) complexes; moreover, the selectivity of salicylaldoxime towards the UO2(2+) cation over competing Cu(2+) and Fe(3+) cations is far greater than those reported for salicylic acid and glutarimidedioxime in the literature. The higher UO2(2+) selectivity can likely be attributed to the different coordination modes observed for salicylaldoxime-UO2(2+) and salicylaldoxime-transition metal complexes. Density functional theory calculations indicate that salicylaldoxime can coordinate with UO2(2+) as a dianion species formed by η(2) coordination of the aldoximate and monodentate binding of the phenolate group. In contrast, salicylaldoxime coordinates with transition metal cations as a monoanion species via a chelate formed between phenolate and the oxime N; the complexes are stabilized via hydrogen bonding interactions between the oxime OH group and phenolate. By coupling the experimentally determined thermodynamic constants and the results of theoretical computations, we are able to derive a number of ligand design principles to further improve the UO2(2+) cation affinity, and thus further increase the selectivity of salicylaldoxime derivatives.

  11. Metal Ions Analysis with Capillary Zone Electrophoresis.

    Science.gov (United States)

    Malik, Ashok Kumar; Aulakh, Jatinder Singh; Kaur, Varinder

    2016-01-01

    Capillary electrophoresis has recently attracted considerable attention as a promising analytical technique for metal ion separations. Significant advances that open new application areas for capillary electrophoresis in the analysis of metal species occurred based on various auxiliary separation principles. These are mainly due to complexation, ion pairing, solvation, and micellization interactions between metal analytes and electrolyte additives, which alter the separation selectivity in a broad range. Likewise, many separation studies for metal ions have been concentrated on the use of preelectrophoresis derivatization methodology. Approaches suitable for manipulation of selectivity for different metal species including metal cations, metal complexes, metal oxoanions, and organometallic compounds, are discussed, with special attention paid to the related electrophoretic system variables using illustrative examples.

  12. Novel metal-ion-mediated, complex-imprinted solid-phase microextraction fiber for the selective recognition of thiabendazole in citrus and soil samples.

    Science.gov (United States)

    Lian, Haixian; Hu, Yuling; Li, Gongke

    2014-01-01

    A novel metal-ion-mediated complex-imprinted-polymer-coated solid-phase microextraction (SPME) fiber used to specifically recognize thiabendazole (TBZ) in citrus and soil samples was developed. The complex-imprinted polymer was introduced as a novel SPME coating using a "complex template" constructed with Cu(II) ions and TBZ. The recognition and enrichment properties of the coating in water were significantly improved based on the metal ion coordination interaction rather than relying on hydrogen bonding interactions that are commonly applied for the molecularly imprinting technique. Several parameters controlling the extraction performance of the complex-imprinted-polymer-coated fiber were investigated including extraction solvent, pH value, extraction time, metal ion species, etc. Furthermore, SPME coupled with HPLC was developed for detection of TBZ, and the methods resulted in good linearity in the range of 10.0-150.0 ng/mL with a detection limit of 2.4 ng/mL. The proposed method was applied to the analysis of TBZ in spiked soil, orange, and lemon with recoveries of 80.0-86.9% and RSDs of 2.0-8.1%. This research provides an example to prepare a desirable water-compatible and specifically selective SPME coating to extract target molecules from aqueous samples by introducing metal ions as the mediator. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. A bis(3-hydroxy-4-pyridinone)-EDTA derivative as a strong chelator for M3+ hard metal ions: complexation ability and selectivity.

    Science.gov (United States)

    Gama, Sofia; Dron, Paul; Chaves, Silvia; Farkas, Etelka; Santos, M Amélia

    2009-08-21

    The study of chelating compounds is very important to solve problems related to human metal overload. 3-Hydroxy-3-pyridinones (HP), namely deferiprone, have been clinically used for chelating therapy of Fe and Al over the last decade. A multi-disciplinary search for alternative molecules led us to develop poly-(3-hydroxy-4-pyridinones) to increase metal chelation efficacy. We present herein a complexation study of a new bis-(3-hydroxy-4-pyridinone)-EDTA derivative with a set of M(3+) hard metal ions (M = Fe, Al, Ga), as well as Zn(2+), a biologically relevant metal ion. Thus a systematic aqueous solution equilibrium study was performed using potentiometric and spectroscopic techniques (UV-Vis, NMR methods). These set of results enables the establishment of specific models as well as the determination of thermodynamic stability constants and coordination modes of the metal complexes. The results indicate that this ligand has a higher affinity for chelating to these hard metal ions than deferiprone, and that the coordination occurs mostly through the HP moieties. Furthermore, it was also found that this ligand has a higher selectivity for chelating to M(3+) hard metal ions (M = Fe, Al, Ga) than Zn(2+).

  14. Conformation of Alkali Metal Ion-Benzo-12-Crown-4 Complexes Investigated by UV Photodissociation and UV-UV Hole-Burning Spectroscopy.

    Science.gov (United States)

    Inokuchi, Yoshiya; Nakatsuma, Maki; Kida, Motoki; Ebata, Takayuki

    2016-08-18

    We measure UV photodissociation (UVPD) spectra of benzo-12-crown-4 (B12C4) complexes with alkali metal ions, M(+)·B12C4 (M = Li, Na, K, Rb, and Cs), in the 36300-37600 cm(-1) region. Thanks to the cooling of ions to ∼10 K, all the M(+)·B12C4 complexes show sharp vibronic bands in this region. For UV-UV hole-burning (HB) spectroscopy, we first check if our experimental system works well by observing UV-UV HB spectra of the K(+) complex with benzo-18-crown-6 (B18C6), K(+)·B18C6. In the UV-UV HB spectra of the K(+)·B18C6 complex, gain signals are also observed; these are due to vibrationally hot K(+)·B18C6 complex produced by the UV excitation of cold K(+)·B18C6 complex. Then we apply UV-UV HB spectroscopy to the M(+)·B12C4 complexes, and only one conformer is found for each complex except for the Li(+) complex, which has two conformers. The vibronic structure around the origin band of the UVPD spectra is quite similar for all the complexes, indicating close resemblance of the complex structure. The most stable structures calculated for the M(+)·B12C4 (M = Li, Na, K, Rb, and Cs) complexes also have a similar conformation among them, which coincides with the UVPD results. In these conformers the metal ions are too big to be included in the B12C4 cavity, even for the Li(+) ion. In solution, it was reported that 12-crown-4 (12C4) shows the preference of Na(+) ion among alkali metal ions. From the similarity of the structure for the M(+)·B12C4 complexes, it is suggested that the solvation of free metal ions, not of the M(+)·12C4 complexes, may lead to the selectivity of Na(+) ion for 12C4 in solution.

  15. Effect of − ′ fusion on metal ion complexation of porphycene

    Indian Academy of Sciences (India)

    Complexation of −′ fused -extended porphycene, namely dinaphthoporphycene was carried out successfully with copper(II) and its solid state structure shows a square-type planar N4-coordination core. The photophysical and electrochemical properties of this complex, along with the nickel(II) complex were also ...

  16. Characterization of aquatic humic substances and their metal complexes by immobilized metal-chelate affinity chromatography on iron(III)-loaded ion exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Burba, P.; Jakubowski, B.; Kuckuk, R. [Institut fuer Spektrochemie und Angewandte Spektroskopie e.V., Dortmund (Germany); Kuellmer, K.; Heumann, K.G. [Mainz Univ. (Germany). Inst. fuer Anorganische Chemie und Analytische Chemie

    2000-12-01

    The analytical fractionation of aquatic humic substances (HS) by means of immobilized metal-chelate affinity chromatography (IMAC) on metal-loaded chelating ion exchangers is described. The cellulose HYPHAN, loaded with different trivalent ions, and the chelate exchanger Chelex 100, loaded to 90% of its capacity with Fe(III), were used. The cellulose HYPHAN, loaded with 2% Fe(III), resulted in HS distribution coefficients K{sub d}of up to 10 {sup 3.7} mL/g at pH 4.0 continuously decreasing down to 10 {sup 1.5} at pH 12, which were appropriate for HS fractionation by a pH-depending chromatographic procedure. Similar distribution coefficients K {sub d} were obtained for HS sorption onto Fe(III)-loaded Chelex 100. On the basis of Fe-loaded HYPHAN both, a low-pressure and high-pressure IMAC technique, were developed for the fractionation of dissolved HS applying a buffer-based pH gradient for their gradual elution between pH 4.0 and 12.0. By coupling the Chelex 100 column under high-pressure conditions with an inductively coupled plasma mass spectrometer an on-line characterization of HS metal species could be achieved. Using these fractionation procedures a number of reference HS were characterized. Accordingly, the HA (humic acids) and FA (fulvic acids) studied could be discriminated into up to 6 fractions by applying cellulose HYPHAN, significantly differing in their Cu(II) complexation capacity but hardly in their substructures assessed by conventional FTIR. In the case of using Chelex 100 exchanger resin two major UV active HS fractions were obtained, which significantly differ in their complexation properties for Cu(II) and Pb(II), respectively. (orig.)

  17. Effect of complexes of cyanidin-3-diglucoside-5-glucoside with rutin and metal ions on their antioxidant activities.

    Science.gov (United States)

    Qian, Bing-Jun; Wu, Chou-Fei; Lu, Man-Man; Xu, Wei; Jing, Pu

    2017-10-01

    Studies have enabled a molecular understanding of the anthocyanin copigmentation phenomenon over several decades. However, the effect of combinations of, or even supramolecular assemblies of, anthocyanins with other phenols and/or metal ions on their antioxidative activity was unclear. In this study, anthocyanin complexes of cyanidin-3-diglucoside-5-glucoside (CY3D5G), rutin and Mg(II)/Fe(III) were constructed, analyzed, and evaluated for their antioxidant effects. The CY3D5G-rutin-Fe(III) exhibited supramolecular properties via visible, CD and FTIR spectra among complexes. The interaction of CY3D5G-rutin, CY3D5G-rutin-Mg(II), or CY3D5G-rutin-Fe(III) was synergistic (Pconcentration of the CY3D5G-rutin-Mg(II) was 7.76μmol QE/L and exhibited a synergistic interaction (CI=0.67, Pconcentration than CY3D5G to achieve the same effect on cells. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. METAL COMPLEXES OF SALICYLHYDROXAMIC ACID AND 1,10 ...

    African Journals Online (AJOL)

    Preferred Customer

    Metal complexes which are formed in biological systems between a ligand and a metal ion are in dynamic equilibrium with the free metal ion in a more or less aqueous environment. All biologically important metal ions can form complexes and the number of different chemical species which can be coordinated with these ...

  19. Conducting metal dithiolate complexes

    DEFF Research Database (Denmark)

    Underhill, A. E.; Ahmad, M. M.; Turner, D. J.

    1985-01-01

    Further work on the chemical composition of the one-dimensional metallic metal dithiolene complex Li-Pt(mnt) is reported. The electrical conduction and thermopower properties of the nickel and palladium complexes are reported and compared with those of the platinum compound......Further work on the chemical composition of the one-dimensional metallic metal dithiolene complex Li-Pt(mnt) is reported. The electrical conduction and thermopower properties of the nickel and palladium complexes are reported and compared with those of the platinum compound...

  20. Uranyl Ion Complexes with Long-Chain Aliphatic α,ω-Dicarboxylates and 3d-Block Metal Counterions.

    Science.gov (United States)

    Thuéry, Pierre; Harrowfield, Jack

    2016-03-07

    Twelve new complexes were obtained from reaction of uranyl ions with the aliphatic dicarboxylic acids HOOC-(CH2)n-2-COOH (H2Cn; n = 7-10 and 12) under solvo-hydrothermal conditions, in the presence of 3d-block metal ions (Mn(2+), Fe(3+), Co(2+), Ni(2+), and Cu(2+)) and 2,2'-bipyridine (bipy) or 1,10-phenanthroline (phen). In contrast to previously reported triple-stranded helicates obtained with C9(2-) and C12(2-), all these complexes crystallize as polymeric one-dimensional (1D) or two-dimensional (2D) species. [Fe(bipy)3][(UO2)2(C7)3]·3H2O (1), [Cu(phen)2]2[(UO2)3(C7)4(H2O)2]·2H2O (2), and [Cu(bipy)2]2[(UO2)2(C9)3] (6), in which the 3d cation was reduced in situ, are 1D ladderlike polymers displaying tetra- or hexanuclear rings, of sufficient width to encompass two counterions in 2 and 6. The three complexes [Co(phen)3][(UO2)3(C8)3(O)]·H2O (3), [Ni(phen)3][(UO2)3(C8)3(O)]·H2O (4) and [Co(phen)3][(UO2)3(C9)3(O)]·H2O (5) contain bis(μ3-oxo)-bridged tetranuclear secondary building units, and they crystallize as deeply furrowed 2D assemblies. Depending on the nature of the counterion, C10(2-) gives [Ni(bipy)3][(UO2)2(C10)3]·2H2O (7), a 2D network displaying elongated decanuclear rings containing the counterions, or [Mn(phen)3][(UO2)2(C10)3]·6H2O (8), [Co(phen)3][(UO2)2(C10)3]·7H2O (9), and [Ni(phen)3][(UO2)2(C10)3]·7H2O (10), which consist of 2D assemblies with honeycomb topology; the hexanuclear rings in 8-10 are chairlike and occupied by one counterion and two uranyl groups from neighboring layers. Two complexes of the ligand with the longest chain, C12(2-), are reported. [UO2(C12)(bipy)] (11) is a neutral 1D species in which bipy chelates the uranyl ion and plays an important role in the packing through π-stacking interactions. Two polymeric units, 1D and 2D, coexist in the complex [Ni(bipy)3][(UO2)2(C12)3][UO2(C12)(H2O)2]·H2O (12); the 2D network has the honeycomb topology, but the hexanuclear rings are markedly convoluted, with local features akin to

  1. Oligocyclopentadienyl transition metal complexes

    Energy Technology Data Exchange (ETDEWEB)

    de Azevedo, Cristina G.; Vollhardt, K. Peter C.

    2002-01-18

    Synthesis, characterization, and reactivity studies of oligocyclopentadienyl transition metal complexes, namely those of fulvalene, tercyclopentadienyl, quatercyclopentadienyl, and pentacyclopentadienyl(cyclopentadienyl) are the subject of this account. Thermal-, photo-, and redox chemistries of homo- and heteropolynuclear complexes are described.

  2. Spectrophotometric Study of Ternary Complex Forming Systems of Some Lanthanide Metal Ions with Eriochrome Cyanine R in Presence of Cetylpyridinium Bromide for Microdetermination

    Directory of Open Access Journals (Sweden)

    A. S. Dhepe

    2011-01-01

    Full Text Available Study of coordination compounds of lanthanide elements has received a great attention due to growing applications in science and technology. Number of chromogenic reagents form water soluble colored complexes with lanthanides. Eriochrome cyanine R (ECR a member of triphenylmethane type of dye has been reported to form green colored complexes with lanthanides and has been used for microdetermination of these metal ions. Addition of cationic surfactant, Cetylpyridinium bromide (CPB, a cationic surfactant sensitizes the color reactions of Gd(III, Tb(III, Dy(III, Ho(III and Lu(III with ECR. Formation of water soluble, highly colored ternary complexes with a considerable bathochromic shift of about 50 nm in presence of surfactant has been observed. Optimum reaction conditions and other analytical parameters were also evaluated. Stoichiometric ratio 1:3:3 of Ln: ECR: CPB are responsible for the observed rise in molar absorptivity and sensitivity. Beer’s law was obeyed between 0.50 to 13.00 ppm. Effective photometric range and molar absorptivity of these ternary complexes have been calculated. Effect of some common interfering ions on determination of these lanthanide metal ions was studied. A simple, rapid and highly sensitive spectrophotometeric method has been proposed for the determination of metal ions understudy.

  3. Kinetic simulation of complex decomposition as a tool for the ion chromatographic determination of elemental speciation of less inert metal ions.

    Science.gov (United States)

    Winter, Christian; Seubert, Andreas

    2016-01-15

    Species decomposition is an often occurring artefact during the chromatographic determination of elemental speciation. The decomposition follows a simple path to lower coordinated compounds. Therefore a simulation is developed for those decomposition reactions. The simulation separates the isochronal processes of the separation itself and the ongoing reaction and delivers thermodynamic and kinetic information about the species present in the original sample. This shifts the boundaries of separation based elemental speciation to less inert metal ions which are typically not analyzable by this approach. The less inert gallium monooxalato complex [GaOx](+) is used as example for testing the simulation software as this complex decomposes only to Ga(3+) and both species are retained on cation exchange columns. We extracted thermodynamic and kinetic information from flow rate experiments by the analysis of the peak areas in the chromatogram. The results show that some of our assumptions such as the irreversibility under the applied chromatographic conditions are not ultimately true, but good accordance of simulation and measured data was achieved. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Effects of alkaline earth metal ion complexation on amino acid zwitterion stability: Results from infrared action spectroscopy

    NARCIS (Netherlands)

    Bush, M. F.; Oomens, J.; Saykally, R. J.; Williams, E. R.

    2008-01-01

    The structures of isolated alkaline earth metal cationized amino acids are investigated using infrared multiple photon dissociation (IRMPD) spectroscopy and theory. These results indicate that arginine, glutamine, proline, serine, and valine all adopt zwitterionic structures when complexed with

  5. Ligand 4’-(4-carboxyphenyl)-2,2’:6’,2”-terpyridine grafted with TiO2-complexation with the ions metal transition and application as fluorosensor for Na+ ion

    Science.gov (United States)

    Malau, B.; Zulys, A.

    2017-04-01

    Ligand 4’-(4-Carboxyphenyl)-2,2’:6’,2”-Terpyridine (Hcptpy) has been synthesized using reaction of aldol condensation. The result was white-yellowish precipitate with yield of 62%. The Ligand hcptpy was grafted with TiO2 by mass ratio 0.15 : 1 (wt/wt). The Hcptpy-TiO2 was reacted in complexation reaction with transition metals (Fe, Mn, Ni) by chelating method, with the best mole chelating ratio of 0.15 : 1 (mole/mole). The ligand Hcptpy, Hcptpy-TiO2 and complex assembly M-Hcptpy-TiO2 were characterized by CHN Analyzer, HNMR, FT-IR, UV-VIS, and UV-DRS. The application of this research was to apply it as fluorosensor for sodium metal ion in sodium chloride. The study was conducted by spectrofluorometer. Types of fluoroscent for sodium metal ion detection are Chelation Quenching Effect (on-off signal) and the Chelation Enhanced Fluoroscence effect (off-on signal). The type of on-off signal causes a quenching in fluoroscence intensity, while the off-on signal causes an increase in fluoroscence intensity. The result showed that Hcptpy-TiO2, Ni-Hcptpy-TiO2 were the off-on fluoroscence type with the ability to respond the presence of sodium ion at concentration 3 × 10-10 M and 3 × 10-9M, respectively. While Mn-Hcptpy-TiO2 and Fe-Hcptpy-TiO2 were the on-off signal type with the ability to respond the presence of sodium metal ion at concentration 3 × 10-8 M and 3 × 10-8 M, respectively. The process of sodium metal ions detection was carried out by substitution reaction of metal ion in complex with sodium metal ions.

  6. Cyclopiazonic Acid Is Complexed to a Divalent Metal Ion When Bound to the Sarcoplasmic Reticulum Ca2+-ATPase

    DEFF Research Database (Denmark)

    Laursen, Mette; Bublitz, Maike; Moncoq, Karine

    2009-01-01

    key residues at or near the ATP binding site. A structural comparison to the Na+, K+-ATPase reveals that the Phe(93) side chain occupies the equivalent binding pocket of the CPA site in SERCA, suggesting an important role of this residue in stabilization of the potassium-occluded E2 state of Na+, K+-ATPase.......Abstract: We have determined the structure of the sarco(endo) plasmic reticulum Ca2+-ATPase (SERCA) in an E2.P-i-like form stabilized as a complex with MgF42-, an ATP analog, adenosine 5'-(beta,gamma-methylene) triphosphate (AMPPCP), and cyclopiazonic acid (CPA). The structure determined at 2.......5 angstrom resolution leads to a significantly revised model of CPA binding when compared with earlier reports. It shows that a divalent metal ion is required for CPA binding through coordination of the tetramic acid moiety at a characteristic kink of the M1 helix found in all P-type ATPase structures, which...

  7. Metallic complexes with glyphosate: a review

    International Nuclear Information System (INIS)

    Coutinho, Claudia F.B.; Mazo, Luiz Henrique

    2005-01-01

    We present studies involving metallic ions and the herbicide glyphosate. The metallic complexes of Cu(II), Zn(II), Mn(II), Ni(II), Cd(II), Pb(II), Cr(III), Fe(III), Co(III), ammonium, sodium, Ag(I), alkaline earth metals and of some lanthanides ions are described. The complexes are discussed in terms of their synthesis, identification, stability and structural properties, based on data from the current literature. (author)

  8. Synthesis and spectral studies on complexes of p-dimethyl amino anil of 3-acetyl-4-hydroxy coumarin glyoxal with Pt++, Ir++ and UO22+ metal ions

    International Nuclear Information System (INIS)

    Rastogi, V.K.; Goel, J.P.; Tyagi, B.S.; Saxena, R.C.; Kela, R.K.

    1983-01-01

    Coumarin derivatives have found extensive application in medicine and biology and they are also known for their complex forming tendencies. The preparation and characterisation of complexes of p-dimethyl amino anil of 3-acetyl-4-hydroxy coumarin glyoxal with some third row transition metal ions e.g. Ir 3+ , Pt 4+ and UO 2 2+ metal ions are described. The values of ligand field splitting energy (10 Dq), Racah interelectronic repulsion parameters (B and C), nephelauxetic ratio (β), γ 2 /γ 1 , and L.F.S.E. are calculated. The results are briefly discussed in an attempt to determine the stereochemistry around the cation and the nature of bonding. K(M-O) and K(M-N) stretching force constants have also been worked out. (author)

  9. Unsymmetrical Schiff base (ON) ligand on complexation with some transition metal ions: synthesis, spectral characterization, antibacterial, fluorescence and thermal studies.

    Science.gov (United States)

    Ali, Omyma A M; El-Medani, Samir M; Abu Serea, Maha R; Sayed, Abeer S S

    2015-02-05

    A series of eight metal Schiff base complexes were synthesized by the thermal reaction of Cu(II), Ni(II), Fe(III), Co(II), Zn(II), Hg(II), La(III) or Sm(III) with a Schiff base "L" produced by the condensation of furfuraldehyde and 1,2-diaminobenzene. These compounds were characterized by elemental analysis, UV-Vis, FT-IR, molar conductance, mass spectrometry, thermal and fluorescence studies. The studies suggested the coordination of the ligand L to metal through azomethine imine nitrogen and furan oxygen atoms of Schiff base moiety. Thermogravimetric (TG/DTG) analyses data were studied and indicated high stability for all complexes and suggested the presence of lattice and/or coordinated water molecules in the complexes. Coats-Redfern method has been used to calculate the kinetic and thermodynamic parameters of the metal complexes. The spectral and thermal analysis reveal that all complexes have octahedral geometry except Cu(II) and Ni(II) complexes which can attain a square planner arrangements. The ligand and its complexes exhibited intraligand (π-π(∗)) fluorescence and can potentially serve as photoactive materials. Both the ligand and its complexes have been screened for antibacterial activities. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Application of equilibrium binding model for analysis of conformational transitions in poly(rApoly(rU complexes with metal ions

    Directory of Open Access Journals (Sweden)

    Sorokin V. A.

    2010-09-01

    Full Text Available Aim. The study is aimed at generalization of the previous experimental results on the metal ion (Mg2+, Ni2+, Cd2+ effects on conformation transitions in poly(rA·poly(rU. The objective was to find out how the type of a metal ion-polynucleotide complex influences the phase transitions and to estimate the constants (K of ions binding to polymers of different structures. Methods. The K values were obtained upon theoretical and experimental transition temperature fitting by the least-square method with the root mean square deviation minimized through the procedure of the gradient descent in the multidimensional space. Results. Calcula- tions of diagrams with Mg2+ are shown to permit obtaining satisfactory results if concentration-independent, mean values of constants are used. For Ni2+ and Cd2+ the concentration dependence of K must be taken into account, especially for high ion contents at which compaction of single-stranded poly(rA emerges. It was revealed that the main factor responsible for the differences in diagrams with Ni2+ and Cd2+ is a significant distinction of their constants of binding to poly(rA and poly(rU. Conclusions. The model theory of equilibrium binding is capable to describe adequately conformation transitions in polynucleotides in the presence of metal ions.

  11. Effect on the Inhibitory Activity of Potential Microbes on the Complexation of Methyl Anthranilate Derived Hydrazide with Cu, Ni and Zn (II) Metal Ions

    International Nuclear Information System (INIS)

    Ikram, M.; Rehman, S.; Khan, K.

    2013-01-01

    The hydrazide ligand 2-amino-(N-aminobezoyl)benzohydrazide (ABH) have been synthesized and characterized by 1H-NMR, 13C-NMR, ES+-MS, elemental analyses and infrared studies. The ligand was complexed with Ni(II), Cu(II) and Zn(II) metal ions and were characterized by analytical and spectroscopic methods including elemental analyses, ES+-MS, conductance, infrared, UV-Visible and magnetic susceptibilities studies. Infrared spectra show that the ligand form complexes through -NH2 and carbonyl moieties, the elemental studies suggested the M(ABH)X2 composition of the coordination compounds. The synthesized complexes were studied for their biological activities against gram negative bacteria including Escherichia coli, Salmonella typhi, Enterobacter aerogenes, Proteus vulgaris, Pseudomonas aeruginosa, Gram positive bacterial strains like Staphylococcus aureus and fungus like Candida albican. These activities show that the metal complexes are more active to the tested microbes as compared to neat ligand. (author)

  12. Transition metal complexes of 4’-(p-nitrophenyl)-2,2’:6’,2”-terpyridine as fluorosensor sodium ion

    Science.gov (United States)

    Zulys, A.; Ovika, D. M. A.

    2017-04-01

    Ligand 4’-(p-nitrophenyl)-2,2’:6’,2”-terpyridine has been synthesized using Kröhnke method by aldol condensation reaction. The solid brown precipitate was collected and resulted 40% yield. The ligand was characterized by 1H-NMR spectrometer, IR spectrophotometer, elemental analyzer, UV-Vis spectrometer, and spectrofluorometer. The complexation of ligand was done by chelating method with transition metal (Cu2+, Zn2+). The complex compounds have been confirmed by UV-Vis spectrophotometer from absorbance spectrum data. The data showed a new peak at wavelength 236 nm for Cu2+ complex and 233 nm for Zn2+ complex. The application of ligand 4’-(p-nitrophenyl)-2,2’:6’,2”-terpyridine and complex compounds is as fluorosensor of sodium ion. The intensity of fluorescence was determined by spectrofluorometer. The addition of various concentrations of sodium ion into ligand and complex compounds (Cu2+, Zn2+) changed the intensity of fluorescence. The fluorescence data of ligand showed the on-off type while Cu and Zn complex showed the off-on type. The on-off type fluorescence was indicated by decreasing intensity and the off-on by increasing intensity. Both ligand and complex compound showed a wavelength shift when sodium ion was added into solution.

  13. Stability Constants of Mixed Ligand Complexes of Transition Metal(II Ions with Salicylidene-4-methoxyaniline as Primary Ligand and 5-Bromosalicylidene-4-nitroaniline as Secondary Ligand

    Directory of Open Access Journals (Sweden)

    N. G. Nadkarni

    2011-01-01

    Full Text Available Binary and ternary complexes of the type M-Y and M-X-Y [M = Mn(II, Ni(II, Cu(II and Zn(II; X = salicylidene-4-methoxyaniline and Y=5-bromosalicylidene-4-nitroaniline] have been examined pH-metrically at 27±0.5 °C and at constant ionic strength, μ= 0.1 M (KCl in 75 : 25(v/v 1,4-dioxne-water medium. The stability constants for binary (M-Y and ternary (M-X-Y systems were calculated. The relative stability (Δ log KT values of the ternary complexes with corresponding binary complexes for all the metal(II ions in the present study found to be negative indicating that ternary 1:1:1 (M-X-Y complexes are less stable than binary 1:1 (M-Y complexes. In the ternary system studied, the order of stability constants of mixed ligand complexes with respect to the metal ions was found to be Cu(II > NI(II > Mn(II > Zn(II; which is same as in the corresponding binary (M-Y systems.

  14. Spectroscopic capture and reactivity of a low-spin cobalt(IV)-oxo complex stabilized by binding redox-inactive metal ions.

    Science.gov (United States)

    Hong, Seungwoo; Pfaff, Florian Felix; Kwon, Eunji; Wang, Yong; Seo, Mi-Sook; Bill, Eckhard; Ray, Kallol; Nam, Wonwoo

    2014-09-22

    High-valent cobalt-oxo intermediates are proposed as reactive intermediates in a number of cobalt-complex-mediated oxidation reactions. Herein we report the spectroscopic capture of low-spin (S=1/2) Co(IV)-oxo species in the presence of redox-inactive metal ions, such as Sc(3+), Ce(3+), Y(3+), and Zn(2+), and the investigation of their reactivity in C-H bond activation and sulfoxidation reactions. Theoretical calculations predict that the binding of Lewis acidic metal ions to the cobalt-oxo core increases the electrophilicity of the oxygen atom, resulting in the redox tautomerism of a highly unstable [(TAML)Co(III)(O˙)](2-) species to a more stable [(TAML)Co(IV)(O)(M(n+))] core. The present report supports the proposed role of the redox-inactive metal ions in facilitating the formation of high-valent metal-oxo cores as a necessary step for oxygen evolution in chemistry and biology. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Core-satellites assembly of silver nanoparticles on a single gold nanoparticle via metal ion-mediated complex.

    Science.gov (United States)

    Choi, Inhee; Song, Hyeon Don; Lee, Suseung; Yang, Young In; Kang, Taewook; Yi, Jongheop

    2012-07-25

    We report core-satellites (Au-Ag) coupled plasmonic nanoassemblies based on bottom-up, high-density assembly of molecular-scale silver nanoparticles on a single gold nanoparticle surface, and demonstrate direct observation and quantification of enhanced plasmon coupling (i.e., intensity amplification and apparent spectra shift) in a single particle level. We also explore metal ion sensing capability based on our coupled plasmonic core-satellites, which enabled at least 1000 times better detection limit as compared to that of a single plasmonic nanoparticle. Our results demonstrate and suggest substantial promise for the development of coupled plasmonic nanostructures for ultrasensitive detection of various biological and chemical analytes.

  16. Polymer-Supported Optically Active fac(S)-Tris(thiotato)rhodium(III) Complex for Sulfur-Bridging Reaction With Precious Metal Ions.

    Science.gov (United States)

    Aizawa, Sen-Ichi; Tsubosaka, Soshi

    2016-01-01

    The optically active mixed-ligand fac(S)-tris(thiolato)rhodium(III) complexes, ΔL -fac(S)-[Rh(aet)2 (L-cys-N,S)](-) (aet = 2-aminoethanethiolate, L-cys = L-cysteinate) () and ΔLL -fac(S)-[Rh(aet)(L-cys-N,S)2 ](2-) were newly prepared by the equatorial preference of the carboxyl group in the coordinated L-cys ligand. The amide formation reaction of with 1,10-diaminodecane and polyallylamine gave the diamine-bridged dinuclear Rh(III) complex and the single-chain polymer-supported Rh(III) complex with retention of the ΔL configuration of , respectively. These Rh(III) complexes reacted with Co(III) or Co(II) to give the linear-type trinuclear structure with the S-bridged Co(III) center and the two Δ-Rh(III) terminal moieties. The polymer-supported Rh(III) complex was applied not only to the CD spectropolarimetric detection and determination of a trace of precious metal ions such as Au(III), Pt(II), and Pd(II) but also to concentration and extraction of these metal ions into the solid polymer phase. Chirality 28:85-91, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  17. Synthesis, characterization and cytotoxicity of rare earth metal ion complexes of N,N‧-bis-(2-thiophenecarboxaldimine)-3,3‧-diaminobenzidene, Schiff base ligand

    Science.gov (United States)

    Shakir, Mohammad; Abbasi, Ambreen; Faraz, Mohammad; Sherwani, Asif

    2015-12-01

    Lanthanide complexes of La3+, Pr3+, Nd3+, Gd3+, Er3+ of general formula [Ln2 L(H2O)4(NO3)4](NO3)2·2H2O have been synthesized from Schiff base, N,N‧-bis-(2-thiophenecarboxaldimine)-3,3‧-diaminobenzidene. The complexes were characterized by elemental analysis, molar conductance, UV-Vis, fluorescence, FT-IR,1H NMR, mass spectroscopy, EDX, SEM and thermal analysis. FT-IR spectral data suggested that ligand coordinate with metal ions through azomethine nitrogen and uncondensed amino group. Molar conductance data revealed 1:2 electrolytic nature of complexes. From the analytical data, the stoichiometry of the complexes was found to be 1:2 (ligand:metal). Thephysico-chemical data suggested eight coordination number for Ln(III)Schiffbase complexes. SEM analysis shows morphological changes in the surfaces of complexes as compared to free ligand. Thermal decomposition profiles were consistent with proposed formulations. The anticancer activity of the complexes and theSchiffbase ligand has been studied towards human cervical cancer celllines (HeLa) and human breast cancer cell lines (MCF-7) and it was found that complexes exhibited greater activity than theSchiffbase.

  18. Coordination of cassava starch to metal ions and thermolysis of ...

    African Journals Online (AJOL)

    Cassava starch formed Werner-type complexes with ions of metals from the transition groups. This was proven by conductivity and electron paramagnetic resonance measurements. The coordination of starch to central metal ions influenced the thermal decomposition of starch. As a rule complexes started to decompose at ...

  19. COORDINATION OF CASSAVA STARCH TO METAL IONS AND ...

    African Journals Online (AJOL)

    a

    ABSTRACT. Cassava starch formed Werner-type complexes with ions of metals from the transition groups. This was proven by conductivity and electron paramagnetic resonance measurements. The coordination of starch to central metal ions influenced the thermal decomposition of starch. As a rule complexes started to ...

  20. Evaluation of Stability of Complexes of Inner Transition Metal Ions with 2-Oxo-1-pyrrolidine Acetamide and Role of Systematic Errors

    Directory of Open Access Journals (Sweden)

    Sangita Sharma

    2011-01-01

    Full Text Available BEST FIT models were used to study the complexation of inner transition metal ions like Y(III, La(III, Ce(III, Pr(III, Nd(III, Sm(III, Gd(III, Dy(III and Th(IV with 2-oxo-1-pyrrolidine acetamide at 30 °C in 10%, 20, 30, 40, 50% and 60% v/v dioxane-water mixture at 0.2 M ionic strength. Irving Rossotti titration method was used to get titration data. Calculations were carried out with PKAS and BEST Fortran IV computer programs. The expected species like L, LH+, ML, ML2 and ML(OH3, were obtained with SPEPLOT. Stability of complexes has increased with increasing the dioxane content. The observed change in stability can be explained on the basis of electrostatic effects, non electrostatic effects, solvating power of solvent mixture, interaction between ions and interaction of ions with solvents. Effect of systematic errors like effect of dissolved carbon dioxide, concentration of alkali, concentration of acid, concentration of ligand and concentration of metal have also been explained here.

  1. Structure of the I-SceI nuclease complexed with its dsDNA target and three catalytic metal ions

    DEFF Research Database (Denmark)

    Prieto, Jesús; Redondo, Pilar; Merino, Nekane

    2016-01-01

    Saccharomyces cerevisiae has been purified after overexpression in Escherichia coli and its crystal structure has been determined in complex with its target DNA. In order to evaluate the number of ions that are involved in the cleavage process, thus determining the catalytic mechanism, crystallization......Homing endonucleases are highly specific DNA-cleaving enzymes that recognize and cleave long stretches of DNA. The engineering of these enzymes provides instruments for genome modification in a wide range of fields, including gene targeting. The homing endonuclease I-SceI from the yeast...... coefficient suggested the presence of two protein-DNA complexes in the asymmetric unit. The crystals diffracted to a resolution limit of 2.9 Å using synchrotron radiation. From the anomalous data, it was determined that three cations are involved in catalysis and it was confirmed that I-SceI follows a two...

  2. Potentiometric studies on ternary complexes involving some divalent transition metal ions, gallic acid and biologically abundant aliphatic dicarboxylic acids in aqueous solutions

    Directory of Open Access Journals (Sweden)

    Abdelatty Mohamed Radalla

    2015-06-01

    Full Text Available Formation of binary and ternary complexes of the divalent transition metal ions, Cu2+, Ni2+, Co2+ and Zn2+ with gallic acid and the biologically important aliphatic dicarboxylic acids (adipic, succinic, malic, malonic, maleic, tartaric and oxalic acids were investigated by means of the potentiometric technique at 25 °C and I = 0.10 mol dm−3 NaNO3. The acid-base properties of the ligands were investigated and discussed. The acidity constants of gallic acid and aliphatic dicarboxylic acids were determined and used for determining the stability constants of the binary and ternary complexes formed in the aqueous medium under the above experimental conditions. The formation of the different 1:1 and 1:2 binary complexes and 1:1:1 ternary complexes are inferred from the corresponding potentiometric pH-metric titration curves. The ternary complex formation was found to occur in a stepwise manner. The stability constants of these binary and ternary systems were calculated. The values of Δ log K, percentage of relative stabilization (%R.S. and log X were evaluated and discussed. The concentration distribution of the various complex species formed in solution was evaluated and discussed. The mode of chelation of ternary complexes formed was ascertained by conductivity measurements.

  3. Metal ion binding with dehydroannulenes – Plausible two ...

    Indian Academy of Sciences (India)

    WINTEC

    has highest interaction energy of –50∙6 kcal/mol at. B3LYP/6-311++G** level and is 128∙0 kcal/mol more than 1′-K+ complex. Understandably, the binding energy of metal complexes decreases with increase in the size of the metal ion, in accordance with ear- lier results.16,21. Placement of the metal ions at the centroid of ...

  4. Relaxation theory of the electronic spin of a complexed paramagnetic metal ion in solution beyond the Redfield limit

    Science.gov (United States)

    Fries, Pascal H.; Belorizky, Elie

    2007-05-01

    The relaxation of the electronic spin S of a paramagnetic metal ion with fully quenched orbital angular momentum in its ground state is investigated in an external magnetic field through a systematic study of the time correlation functions governing the evolution of the statistical operator (density matrix). Let ω0 be the Larmor angular frequency of S. When the relaxation is induced by a time-fluctuating perturbing Hamiltonian ℏH1(t ) of time correlation τc, it is demonstrated that after a transient period the standard Redfield approximation is relevant to calculate the evolution of the populations of the spin states if ∥H1∥2τc2/(1+ω02τc2)≪1 and that this transient period becomes shorter than τc at sufficiently high field for a zero-field splitting perturbing Hamiltonian. This property, proven analytically and confirmed by numerical simulation, explains the surprising success of several simple expressions of the longitudinal electronic relaxation rate 1/T1e derived from the Redfield approximation well beyond its expected validity range ∥H1∥τc≪1. It has favorable practical consequences on the interpretation of the paramagnetic relaxation enhancement of nuclei used for structural and dynamic studies.

  5. Metal ion sequestration: An exciting dimension for molecularly ...

    African Journals Online (AJOL)

    Metal ion sequestration: An exciting dimension for molecularly imprinted polymer technology. DMS Mosha, LL Mkayula. Abstract. The use of a tight binding macrocyclic ligand to complex a metal ion so that this serves as receptee on the Molecularly Imprinted Polymer (MIP) receptor as described here affords a sequestration ...

  6. Interaction of Hydroxyproline with Bivalent Metal Ions in Chemical ...

    African Journals Online (AJOL)

    NICO

    The stability constants of the ML and ML2 complex species of some metal ions, namely beryllium(II) and cobalt(II), with hydroxyproline were ... metal ions have several significant applications in biological systems.3–20 Beryllium is one ... 1 filter paper for chromatography was used for the purpose of electrophoresis. An Elico ...

  7. Studies on coordination chemistry and bioactivity of metal complexes of some nitrogen-sulfur donor ligands: Section A: hydraziniumdithiocarbazate and its complexes. Section B: complexes of Ni2+ and Cu2+ ions with s-picolyldithiocarbazate

    International Nuclear Information System (INIS)

    Tarafder, M.T.H.; Liza bt Abdullah; Crouse, Karen A.; Ali, A.M.

    2003-08-01

    Two new nitrogen - sulphur donor ligands, hydraziniumdithiocarbazate(HzDTC) and S-picolyldithiocarbazate(SPDTC), along with three novel Schiff bases were prepared. Complexes of some of HzDTC with nickel(II), zinc(II), and those of SPDTC with nickel(II) and copper(II) were prepared and characterized by a variety of physico- chemical techniques. The ligand, HzDTC, was a potential bidentate and uninegatively charged providing terminal amino and thiolate bindings with the metal ions, while SPDTC coordinates via the pyridine nitrogen and the thiolate anion. All of the compounds were tested against four pathogenic bacteria and fungi. HzDTC was found to be very effective antimicrobial than its complexes. The complexes of SPDTC and the Schiff bases of HzDTC were more antifungal. None of the compounds were effective anti- cancer agents except for [Ni(HzDTCA)Cl.H 2 O], which was moderately active against CEM- SS (Human cell T- lymphoblastic) leukemic cells. (author)

  8. Metal ion adsorption characteristics of tea leaves

    OpenAIRE

    Takao, Hiromitsu; Kawahigashi, Tatsuo

    2016-01-01

    [Abstract] For effective use of tea leaves, this study experimentally evaluated metal ion adsorption by tea leaves. The experiment described herein was conducted by measuring the ionic solution at a constant density using a fluorescence X-ray device. The metallic ion concentration in the solution and the fluorescence X-ray output intensity showed good correlation. Tea leaves were put into solution adjusted with density of an already-known metallic ion. Then the decrease of the metal ion was m...

  9. Effect of adsorbed metals ions on the transport of Zn- and Ni-EDTA complexes in a sand and gravel aquifer

    Science.gov (United States)

    Kent, D.B.; Davis, J.A.; Anderson, L.C.D.; Rea, B.A.; Coston, J.A.

    2002-01-01

    Adsorption, complexation, and dissolution reactions strongly influenced the transport of metal ions complexed with ethylenediaminetetraacetic acid (EDTA) in a predominantly quartz-sand aquifer during two tracer tests conducted under mildly reducing conditions at pH 5.8 to 6.1. In tracer test M89, EDTA complexes of zinc (Zn) and nickel (Ni), along with excess free EDTA, were injected such that the lower portion of the tracer cloud traveled through a region with adsorbed manganese (Mn) and the upper portion of the tracer cloud traveled through a region with adsorbed Zn. In tracer test S89, Ni- and Zn-EDTA complexes, along with excess EDTA complexed with calcium (Ca), were injected into a region with adsorbed Mn. The only discernable chemical reaction between Ni-EDTA and the sediments was a small degree of reversible adsorption leading to minor retardation. In the absence of adsorbed Zn, the injected Zn was displaced from EDTA complexes by iron(III) [Fe(III)] dissolved from the sediments. Displacement of Zn by Fe(III) on EDTA became increasingly thermodynamically favorable with decreasing total EDTA concentration. The reaction was slow compared to the time-scale of transport. Free EDTA rapidly dissolved aluminum (Al) from the sediments, which was subsequently displaced slowly by Fe. In the portion of tracer cloud M89 that traveled through the region contaminated with adsorbed Zn, little displacement of Zn complexed with EDTA was observed, and Al was rapidly displaced from EDTA by Zn desorbed from the sediments, in agreement with equilibrium calculations. In tracer test S89, desorption of Mn dominated over the more thermodynamically favorable dissolution of Al oxyhydroxides. Comparison with results from M89 suggests that dissolution of Al oxyhydroxides in coatings on these sediment grains by Ca-EDTA was rate-limited whereas that by free EDTA reached equilibrium on the time-scale of transport. Rates of desorption are much faster than rates of dissolution of Fe

  10. Formation of Mixed-Ligand Complexes of Pd2+ with Nucleoside 5'-Monophosphates and Some Metal-Ion-Binding Nucleoside Surrogates

    Directory of Open Access Journals (Sweden)

    Oleg Golubev

    2014-10-01

    Full Text Available Formation of mixed-ligand Pd2+ complexes between canonical nucleoside 5'-monophosphates and five metal-ion-binding nucleoside analogs has been studied by 1H-NMR spectroscopy to test the ability of these nucleoside surrogates to discriminate between unmodified nucleobases by Pd2+-mediated base pairing. The nucleoside analogs studied included 2,6-bis(3,5-dimethylpyrazol-1-yl-, 2,6-bis(1-methylhydrazinyl- and 6-(3,5-dimethylpyrazol-1-yl-substituted 9-(β-d-ribofuranosylpurines 1–3, and 2,4-bis(3,5-dimethylpyrazol-1-yl- and 2,4-bis(1-methylhydrazinyl-substituted 5-(β-d-ribofuranosyl-pyrimidines 4–5. Among these, the purine derivatives 1-3 bound Pd2+ much more tightly than the pyrimidine derivatives 4, 5 despite apparently similar structures of the potential coordination sites. Compounds 1 and 2 formed markedly stable mixed-ligand Pd2+ complexes with UMP and GMP, UMP binding favored by 1 and GMP by 2. With 3, formation of mixed-ligand complexes was retarded by binding of two molecules of 3 to Pd2+.

  11. Some transition metal ions complexes of tricine (Tn and amino acids: pH-titration, synthesis and antimicrobial activity

    Directory of Open Access Journals (Sweden)

    M.E. Zayed

    2014-12-01

    Full Text Available Equilibrium studies have been carried out on complex formation of M(II (M = Co(II, Cu(II and Zn(II with tricine (Tn and L = amino acids in aqueous solution, at 25 °C and ionic strength of I = 0.1 M (NaNO3. The ternary complexes of amino acids are formed by simultaneous reactions. The concentration distribution of the complexes is evaluated. The solid complexes of [M(II–Tn–Histidine (Hist] have been synthesized and characterized by elemental analysis, infrared, magnetic and conductance measurements. The synthesized complexes have been screened for their antibacterial activities and the complexes show a significant antibacterial activity against four bacterial species: Staphylococcus aureus (Gram +ve, Streptococcus pyogenesr (Gram +ve, Serratia marcescens (Gram −ve and Escherichia coli (Gram −ve. The activity increases by increasing the concentration of the complexes.

  12. An Animal Model Using Metallic Ions to Produce Autoimmune Nephritis

    Directory of Open Access Journals (Sweden)

    Roxana Ramírez-Sandoval

    2015-01-01

    Full Text Available Autoimmune nephritis triggered by metallic ions was assessed in a Long-Evans rat model. The parameters evaluated included antinuclear autoantibody production, kidney damage mediated by immune complexes detected by immunofluorescence, and renal function tested by retention of nitrogen waste products and proteinuria. To accomplish our goal, the animals were treated with the following ionic metals: HgCl2, CuSO4, AgNO3, and Pb(NO32. A group without ionic metals was used as the control. The results of the present investigation demonstrated that metallic ions triggered antinuclear antibody production in 60% of animals, some of them with anti-DNA specificity. Furthermore, all animals treated with heavy metals developed toxic glomerulonephritis with immune complex deposition along the mesangium and membranes. These phenomena were accompanied by proteinuria and increased concentrations of urea. Based on these results, we conclude that metallic ions may induce experimental autoimmune nephritis.

  13. Electrochemical analysis of metal complexes

    NARCIS (Netherlands)

    Jong, de H.G.

    1987-01-01

    The present study is concerned with the electroanalytical chemistry of complexes of metals with large ligands. The main purpose was to develop quantitative descriptions of the voltammetric current-potential relation of metal complex systems with different diffusion coefficients of the

  14. Solution properties of metal ion complexes formed with the antiviral and cytostatic nucleotide analogue 9-[2-(phosphonomethoxy)ethyl]-2-amino-6-dimethylaminopurine (PME2A6DMAP)

    Czech Academy of Sciences Publication Activity Database

    Gómez-Coca, R. B.; Sigel, A.; Operschall, B. P.; Holý, Antonín; Sigel, H.

    2014-01-01

    Roč. 92, č. 8 (2014), s. 771-780 ISSN 0008-4042 Institutional support: RVO:61388963 Keywords : acyclic nucleoside phosphonates * antivirals * intramolecular equilibria * metal-ion complexes * nucleotide analogues * stability constants Subject RIV: CC - Organic Chemistry Impact factor: 1.061, year: 2014

  15. Use of the ion exchange method for the determination of stability constants of trivalent metal complexes with humic and fulvic acids--part I: Eu3+ and Am3+ complexes in weakly acidic conditions.

    Science.gov (United States)

    Wenming, Dong; Hongxia, Zhang; Meide, Huang; Zuyi, Tao

    2002-06-01

    The conditional stability constants for tracer concentrations of Eu(III) and Am(III) with a red earth humic acid (REHA), a red earth fulvic acid (REFA) and a fulvic acid from weathered coal (WFA) were determined at pH 5.2-6.4 (such values are similar to those in non-calcareous soils) in the presence of HAc/NaAc or NaNO3 by using the cation exchange method. It was found that 1:1 complexes were predominately formed in weakly acidic conditions. The total exchangeable proton capacities and the degrees of dissociation of these humic substances were determined by using a potentiometric titration method. The key parameters necessary for the experimental determination of the conditional stability constants of metal ions with humic substances in weakly acidic conditions by using the cation exchange method were discussed. The conditional stability constants of 1:1 complexes obtained in this paper were compared with the literature data of Am(III) determined by using the ion exchange method and the solvent extraction method and with the stability constants of 1:1 complexes of UO2(2+) and Th4+ with the same soil humic substances. These results indicate the great stability of bivalent UO2(2+), trivalent Eu3+, Am3+ and tetravalent Th4+ complexes with humic and fulvic acids in weakly acidic conditions.

  16. Use of the ion exchange method for the determination of stability constants of trivalent metal complexes with humic and fulvic acids--Part I: Eu{sup 3+} and Am{sup 3+} complexes in weakly acidic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Dong Wenming E-mail: dongwm@lzu.edu.cn; Zhang Hongxia; Huang Meide; Tao Zuyi

    2002-06-01

    The conditional stability constants for tracer concentrations of Eu(III) and Am(III) with a red earth humic acid (REHA), a red earth fulvic acid (REFA) and a fulvic acid from weathered coal (WFA) were determined at pH 5.2-6.4 (such values are similar to those in non-calcareous soils) in the presence of HAc/NaAc or NaNO{sub 3} by using the cation exchange method. It was found that 1 : 1 complexes were predominately formed in weakly acidic conditions. The total exchangeable proton capacities and the degrees of dissociation of these humic substances were determined by using a potentiometric titration method. The key parameters necessary for the experimental determination of the conditional stability constants of metal ions with humic substances in weakly acidic conditions by using the cation exchange method were discussed. The conditional stability constants of 1 : 1 complexes obtained in this paper were compared with the literature data of Am(III) determined by using the ion exchange method and the solvent extraction method and with the stability constants of 1 : 1 complexes of UO{sub 2}{sup 2+} and Th{sup 4+} with the same soil humic substances. These results indicate the great stability of bivalent UO{sub 2}{sup 2+}, trivalent Eu{sup 3+}, Am{sup 3+} and tetravalent Th{sup 4+} complexes with humic and fulvic acids in weakly acidic conditions.

  17. Selective complexation of the uranyl ion using modified polymeric supports

    International Nuclear Information System (INIS)

    Roundhill, D.M.

    1993-01-01

    We have recently examined the complexation properties of aminomethylenebis(phosphonic acids) towards selected trivalent metal ions, and have found that they form highly stable complexes with these oxophilic metal centers. These metal complexes were found resistant to metal ion dissociation in acidic media and present in aqueous solution as both 1:1 and 1:2 (metal ion:ligand, M:L) species. The uranyl ion, although structurally different from simple M 3+ ions because of its linear geometry, possesses a similar +3 to +4 charge at the metal center. Because of the high positive charge on uranium in the ion UO 2 2+ , and because of the potential capacity of the axial oxygens on this ion to form intramolecular hydrogen bonds with a proton on the ligand, there is a good possibility that the uranyl ion will form stable complexes having 1:1,1:2 and 1:3 (M:L) stoichometries with aminomethylenebis(phosphonates) as ligand. There is considerable precedent that a phosphonate group will form strong complexes with the UO 2 , 2+ ion, and there is the additional possibility that the amino moiety on these ligands will provide further selectivity for complexation via hydrogen bonding. Furthermore, these ligands are simple and inexpensive to synthesize, thus making them potentially useful for application in large scale batch separation processes. To test these concepts, we have measured the stability and protonation constants of the different complexes formed in aqueous solution. From this data we can evaluate the potential for compounds of this type to be useful as uranyl ion sequestering agents

  18. Studies in stability constants of schiff base hydrazone complexes with transition metal ions. Effect of ligand on seed germination

    Science.gov (United States)

    Meshram, U. P.; Pethe, G. B.; Yaul, A. R.; Khobragade, B. G.; Narwade, M. L.

    2017-10-01

    Spectrophotometric investigation of Cu (II), Ni(II), Co(II), and Fe(III) complexes with 2,4-dihydroxyacetophonone 2,4-dichlorobenzoylhydrazone (H2L1) and 2,4-didydroxy-5-nitroacetophenone 2,4-dichlorobenzoylhydrazone (H2L2) shows 1: 1 and 1: 2 complex formation between the pH range of 3.0 to 6.0 and also studied by jobs variation method at 0.1 M ionic strength at 30 ± 1°C specrtophotometrically. The conditional stability constants are determined for 1: 1 complexes. Effect of H2L1 and H2L2 ligand and its complexes on seed germination is studied.

  19. Formation of aqueous complexes of metal ions formed during the reprocessing of nuclear fuels with ortho-phenanthroline and dibutylphosphate

    International Nuclear Information System (INIS)

    Musikas, C.; Le Marois, G.; Racinoux, J.

    1979-01-01

    In this work the formation of aqueous complexes of metalions (lanthanides, actinides) was investigated that occurs during reprocessing of nuclear combustibles with ortho-phenanthroline and dibutylphosphate. Complexes with different ligand numbers and solubility are formed. Cationic and anionic forms according to the DBP concentration in the extraction solution. Acid-base titrations, absorption spectra and solubility determinations were used for the characterization. (RB) [de

  20. Enhanced Structural Support of Metal Sites as Nodes in Metal-Organic Frameworks Compared to Metal Complexes

    OpenAIRE

    Das, Sanjit

    2013-01-01

    Metal-organic frameworks are a new class of crystalline, porous solid-state materials with metal ions periodically linked by organic linkers. This gives rise to one-, two- or three-dimensional structures. Here, we compare the stability of similar metal sites toward external ligand (solvent) induced disruption of the coordination environment in metal complexes and in metal-organic frameworks. Our experimental results show that a metal site as node of a metal-organic framework retains much high...

  1. Effect of sulphate and chloride ions on the solvent extraction of some metal ions with liquid cation exchangers

    International Nuclear Information System (INIS)

    Shibata, Junji; Nishimura, Sanji

    1977-01-01

    The extraction of the metal ions from sulphate and chloride solutions with Versatic Acid 911 and di(2-ethyl hexyl) phosphoric acid in benzene was investigated in order to clarify the effect of sulphate and chloride ions on the extraction. Sulphate and chloride ions are not extracted into the organic phase, and they affect metal extraction only by forming the complexes with metal ions in the aqueous phase. The extent of the effect on metal extraction is determined by the kind of metal ions and anionic ligands, and the concentration of ligand ions. Therefore, the difference in extraction behaviour may be explained by the complexing ability of the various anionic ligands present in the aqueous phase. Formation constants of the complexes between metal ions and anionic ligands were computed from these distribution data. (auth.)

  2. Metal complexes of phosphinic acids

    International Nuclear Information System (INIS)

    Das, P.N.M.; Kuchen, W.; Keck, H.; Haegele, G.

    1977-01-01

    Pr(III), Nd(III) and Eu(III) complexes of dimethyldithiophosphinic acid have been prepared. Their properties and structures have been studied using elemental analysis, molecular weight determination, IR, UV, mass, NMR, magnetic studies, etc. It is found that these metals form neutral complexes of the type ML 3 where L is a deprotonated bidentate dimethyldithiophosphinic acid molecule. The coordination number exhibited by these metals in this case is six. Octahedral structures have been assigned to these complexes. (author)

  3. Designer ligands: The search for metal ion selectivity

    Directory of Open Access Journals (Sweden)

    Perry T. Kaye

    2011-03-01

    Full Text Available The paper reviews research conducted at Rhodes University towards the development of metal-selective ligands. The research has focused on the rational design, synthesis and evaluation of novel ligands for use in the formation of copper complexes as biomimetic models of the metalloenzyme, tyrosinase, and for the selective extraction of silver, nickel and platinum group metal ions in the presence of contaminating metal ions. Attention has also been given to the development of efficient, metal-selective molecular imprinted polymers.

  4. Synthesis, Spectral Analysis and Preliminary in Vitro Evaluation of Some Tetrapyrrolic Complexes with 3d Metal Ions

    Directory of Open Access Journals (Sweden)

    Radu Socoteanu

    2015-08-01

    Full Text Available In this paper, two tetrapyrrolic complexes, Zn(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin and Cu(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin were synthesized, and characterized from a spectral and biological point of view. The study provided data concerning the behavior of identical external substituents vs. two different core insertions. Some of the properties of the proposed tetrapyrrolic structures were highlighted, having photodynamic therapy of cancer as a targeted biomedical application. Elemental analysis, NMR, FTIR and UV-Vis data in various solvents were provided. A preliminary in vitro study on normal and cancer cultured cells was carried out for biocompatibility assessment in dark conditions. The preliminary in vitro study performed on human peripheral mononuclear cells exposed to tetrapyrrolic compounds (2 µM showed that the proposed compounds had a convenient cytotoxic profile on human normal peripheral blood mononuclear cells under dark conditions. Meanwhile, the investigated compounds reduced the number of metabolically active breast tumor MCF-7 cells, with the exception of Zn(II complex-containing a symmetrical ligand. Accordingly, preliminary in vitro data suggest that the proposed tetrapyrrolic compounds are good candidates for PDT, as they limit tumor expansion even under dark conditions, whilst sparing normal cells.

  5. Amorphization of metals by ion implantation and ion beam mixing

    International Nuclear Information System (INIS)

    Rauschenbach, B.; Heera, V.

    1988-01-01

    Amorphous metallic systems can be formed either by high-fluence ion implantation of glassforming species or by irradiation of layered metal systems with inert gas ions. Both techniques and experimental examples are presented. Empirical rules are discussed which predict whether a given system can be transformed into an amorphous phase. Influence of temperature, implantation dose and pre-existing crystalline metal composition on amorphization is considered. Examples are given of the implantation induced amorphous structure, recrystallization and formation of quasicrystalline structures. (author)

  6. Synthesis and Characterization of Templated Ion Exchange Resins for the Selective Complexation of Actinide Ions

    Energy Technology Data Exchange (ETDEWEB)

    Uy, O. Manual

    2001-03-01

    The purpose of this research is to develop a polymeric extractant for the selective complexation of uranyl ions (and subsequently other actinyl and actinide ions) from aqueous solutions (lakes, streams, waste tanks and even body fluids). Chemical insights into what makes a good complexation site will be used to synthesize reagents tailor-made for the complexation of uranyl and other actinide ions. These insights, derived from studies of molecular recognition include ion coordination number and geometry, ionic size and ionic shape, as well as ion to ligand thermodynamic affinity. Selectivity for a specific actinide ion will be obtained by providing the polymers with cavities lined with complexing ligands so arranged as to match the charge, coordination number, coordination geometry, and size of the actinide metal ion. These cavity-containing polymers will be produced by using a specific ion (or surrogate) as a template around which monomeric complexing ligands will be polymerized. The complexing ligands will be ones containing functional groups known to form stable complexes with a specific ion and less stable complexes with other cations. Prior investigator's approaches for making templated resins for metal ions have had marginal success. We have extended and amended these methodologies in our work with Pb(II) and uranyl ion, by changing the order of the steps, by the inclusion of sonication, by using higher complex loading, and the selection of functional groups with better complexation constants. This has resulted in significant improvements to selectivity. The unusual shape of the uranyl ion suggests that this approach will result in even greater selectivities than already observed for Pb(II). Preliminary data obtained for uranyl templated polymers shows unprecedented selectivity and has resulted in the first ion selective electrode for uranyl ion.

  7. The surface chemistry of divalent metal carbonate minerals; a critical assessment of surface charge and potential data using the charge distribution multi-site ion complexation model

    NARCIS (Netherlands)

    Wolthers, M.; Charlet, L.; Van Cappellen, P.

    2008-01-01

    The Charge Distribution MUltiSite Ion Complexation or CD–MUSIC modeling approach is used to describe the chemical structure of carbonate mineralaqueous solution interfaces. The new model extends existing surface complexation models of carbonate minerals, by including atomic scale information on

  8. Heavy metal ions are potent inhibitors of protein folding.

    Science.gov (United States)

    Sharma, Sandeep K; Goloubinoff, Pierre; Christen, Philipp

    2008-07-25

    Environmental and occupational exposure to heavy metals such as cadmium, mercury and lead results in severe health hazards including prenatal and developmental defects. The deleterious effects of heavy metal ions have hitherto been attributed to their interactions with specific, particularly susceptible native proteins. Here, we report an as yet undescribed mode of heavy metal toxicity. Cd2+, Hg2+ and Pb2+ proved to inhibit very efficiently the spontaneous refolding of chemically denatured proteins by forming high-affinity multidentate complexes with thiol and other functional groups (IC(50) in the nanomolar range). With similar efficacy, the heavy metal ions inhibited the chaperone-assisted refolding of chemically denatured and heat-denatured proteins. Thus, the toxic effects of heavy metal ions may result as well from their interaction with the more readily accessible functional groups of proteins in nascent and other non-native form. The toxic scope of heavy metals seems to be substantially larger than assumed so far.

  9. Complex metal hydrides

    DEFF Research Database (Denmark)

    Ley, Morten Brix

    2014-01-01

    og batterier de to mest lovende energibærere til mobile applikationer. Komplekse metalhydrider er blevet undersøgt i vid udstrækning over de sidste tyve år, siden de gravimetrisk og volumetrisk kan indeholde store mængder brint. Derfor er metal borhydrider velegnet til faststofopbevaring af brint...

  10. Separation of metal ions from aqueous solutions

    Science.gov (United States)

    Almon, Amy C.

    1994-01-01

    A process and apparatus for quantitatively and selectively separating metal ions from mixtures thereof in aqueous solution. The apparatus includes, in combination, a horizontal electrochemical flow cell containing flow bulk electrolyte solution and an aqueous, metal ion-containing solution, the cell containing a metal mesh working electrode, a counter electrode positioned downstream from the working electrode, an independent variable power supply/potentiostat positioned outside of the flow cell and connected to the electrodes, and optionally a detector such as a chromatographic detector, positioned outside the flow cell. This apparatus and its operation has significant application where trace amounts of metal ions are to be separated.

  11. Using Ion Exchange Chromatography to Separate and Quantify Complex Ions

    Science.gov (United States)

    Johnson, Brian J.

    2014-01-01

    Ion exchange chromatography is an important technique in the separation of charged species, particularly in biological, inorganic, and environmental samples. In this experiment, students are supplied with a mixture of two substitution-inert complex ions. They separate the complexes by ion exchange chromatography using a "flash"…

  12. Interaction of Hydroxyproline with Bivalent Metal Ions in Chemical ...

    African Journals Online (AJOL)

    Arecent technique involving the use of paper electrophoresis is described for the study of equilibria in binary complex systems in solution. The stability constants of the ML and ML2 complex species of some metal ions, namely beryllium(II) and cobalt(II), with hydroxyproline were determined in 0.1 mol L–1 perchloric acid ...

  13. Speciation and stability of methylene blue-metal-thiocyanate ion ...

    African Journals Online (AJOL)

    The relative stabilities indicate that cobalt is preferred to other two metals in the speciation of ternary complexes comparable with similar complexes in biosystems. This study also provides a method for the spectrophotometric determination of Co(II) and Zn(II) ions at nanogram levels at 25 oC and an ionic strength of 0.15 M.

  14. Use of the ion exchange method for the determination of stability constants of trivalent metal complexes with humic and fulvic acids II. Tb3+, Yb3+ and Gd3+ complexes in weakly alkaline conditions

    International Nuclear Information System (INIS)

    Dong Wenming; Li Weijuan; Tao Zuyi

    2002-01-01

    The conditional stability constants for tracer concentrations of Tb(III), Yb(III), and Gd(III) with three soil humic acids, three soil fulvic acids and a fulvic acid from weathered coal were determined at pH 9.0-9.1 (these values are similar to those in calcareous soils) in the presence of NaHCO 3 by using the anion exchange method. It was found that 1 : 1 and 1 : 2 complexes were simultaneously formed in the weakly alkaline conditions. The conditional stability constants of these 1 : 1 and 1 : 2 complexes were calculated from the distribution coefficients of rare earth elements at various concentrations of humate or fulvate. The stability constants indicate the very high stability of trivalent Tb 3+ , Yb 3+ and Gd 3+ complexes with humic substances in weakly alkaline conditions. The key parameters necessary for the experimental determination of the conditional stability constants of metal ions with humic substances in the presence of NaHCO 3 by using an anion exchange method were discussed. The conditional stability constants of these 1 : 1 and 1 : 2 complexes were compared in this paper. It was found that stabilities of Tb 3+ 1 : 1 and 1 : 2 complexes with humic acid are greater than the corresponding ones with fulvic acid from the same soil. In addition, the effect of the presence of Ca 2+ as a competitor on the stabilities of 1 : 1 and 1 : 2 complexes of Yb was examined and no pronounced change of stabilities of 1 : 1 complex was found, even though Ca 2+ is in a 10 3 excess to Yb 3+

  15. Fe- and Cu-complex formation with artificial ligands investigated by ultra-high resolution Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR-MS: Implications for natural metal-organic complex studies

    Directory of Open Access Journals (Sweden)

    Hannelore Waska

    2016-07-01

    Full Text Available In recent years, electrospray-ionization mass spectrometry (ESI-MS has been increasingly used to complement the bulk determination of metal-ligand equilibria, for example via competitive ligand exchange-adsorptive cathodic stripping voltammetry (CLE-ACSV. However, ESI-MS speciation analyses may be impacted by instrumental artefacts such as reduction reactions, fragmentation, and adduct formation at the ESI source, changes in the ionization efficiencies of the detected species in relation to sample matrix, and peak overlaps in response to increasing sample complexity. In our study, equilibria of the known artificial ligands citrate, ethylenediaminetetraacetic acid (EDTA, 1-nitroso-2-naphthol (NN, and salicylaldoxime (SA with iron (Fe and copper (Cu were investigated by ultra-high resolution ESI-MS, Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR-MS, under a variety of sample matrix and ionization settings. The acquired mass spectra were compared with metal-ligand equilibrium data from the literature as well as an adapted speciation model. Overall, the mass spectra produced representative species mentioned in previous reports and predicted by the speciation calculations, such as Fe(Cit, Cu(Cit2, Fe(EDTA, Cu(EDTA, Fe(NN3, and Cu(SA2. The analyses furthermore revealed new species which had been hypothesized but not measured directly using other methods, for example ternary complexes of citrate with Fe and Cu, Cu(SA monomers, and the dimer Fe(SA2. Finally, parallel measurements of a Cu+SA calibration series and a Cu+SA+EDTA competition series indicated that FT-ICR-MS can produce linear responses and low detection limits analogous to those of ACSV. We propose that ultra-high resolution FT-ICR-MS can be used as a representative tool to study interactions of trace metals with artificial as well as natural, unknown ligands at the molecular level.

  16. Novel metals and metal complexes as platforms for cancer therapy.

    Science.gov (United States)

    Frezza, Michael; Hindo, Sarmad; Chen, Di; Davenport, Andrew; Schmitt, Sara; Tomco, Dajena; Dou, Q Ping

    2010-06-01

    Metals are essential cellular components selected by nature to function in several indispensable biochemical processes for living organisms. Metals are endowed with unique characteristics that include redox activity, variable coordination modes, and reactivity towards organic substrates. Due to their reactivity, metals are tightly regulated under normal conditions and aberrant metal ion concentrations are associated with various pathological disorders, including cancer. For these reasons, coordination complexes, either as drugs or prodrugs, become very attractive probes as potential anticancer agents. The use of metals and their salts for medicinal purposes, from iatrochemistry to modern day, has been present throughout human history. The discovery of cisplatin, cis-[Pt(II) (NH(3))(2)Cl(2)], was a defining moment which triggered the interest in platinum(II)- and other metal-containing complexes as potential novel anticancer drugs. Other interests in this field address concerns for uptake, toxicity, and resistance to metallodrugs. This review article highlights selected metals that have gained considerable interest in both the development and the treatment of cancer. For example, copper is enriched in various human cancer tissues and is a co-factor essential for tumor angiogenesis processes. However the use of copper-binding ligands to target tumor copper could provide a novel strategy for cancer selective treatment. The use of nonessential metals as probes to target molecular pathways as anticancer agents is also emphasized. Finally, based on the interface between molecular biology and bioinorganic chemistry the design of coordination complexes for cancer treatment is reviewed and design strategies and mechanisms of action are discussed.

  17. Structural Metals in the Group I Intron: A Ribozyme with a Multiple Metal Ion Core

    Energy Technology Data Exchange (ETDEWEB)

    Stahley,M.; Adams, P.; Wang, J.; Strobel, S.

    2007-01-01

    Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg2+ and K+ ions. Five of the metals bind within 12 Angstroms of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.

  18. Effective charge of energetic ions in metals

    International Nuclear Information System (INIS)

    Kitagawa, M.; Brandt, W.

    1983-01-01

    The effective charge of energetic ion, as derived from stopping power of metals, is calculated by use of a dielectronic-response function method. The electronic distribution in the ion is described through the variational principle in a statistical approximation. The dependences of effective charge on the ion velocity, atomic number and r/sub s/-value of metal are derived at the low-velocity region. The effective charge becomes larger than the real charge of ion due to the close collisions. We obtain the quasi-universal equation of the fractional effective electron number of ion as a function of the ratio between the ionic size and the minimum distance approach. The comparsion between theoretical and experimental results of the effective charge is performed for the cases of N ion into Au, C and Al. We also discuss the equipartition rule of partially ionized ion at the high-velocity region

  19. Metal ion mediated photolysis reactions of riboflavin: A kinetic study.

    Science.gov (United States)

    Ahmad, Iqbal; Anwar, Zubair; Ahmed, Sofia; Sheraz, Muhammad Ali; Khattak, Saif-Ur-Rehman

    2017-08-01

    The effect of metal ion complexation on the photolysis of riboflavin (RF) using various metal ions (Ag + , Ni 2+ , Co 2+ , Fe 2+ , Ca 2+ , Cd 2+ , Cu 2+ , Mn 2+ , Pb 2+ , Mg 2+ , Zn 2+ , Fe 3+ ) has been studied. Ultraviolet and visible spectral and fluorimetric evidence has been obtained to confirm the formation of metal-RF complexes. The kinetics of photolysis of RF in metal-RF complexes at pH7.0 has been evaluated. The apparent first-order rate constant (k obs ) for the photolysis of RF and the formation of lumichrome (LC) and lumiflavin (LF) (0.001M phosphate buffer) and LC, LF and cyclodehydroriboflavin (CDRF) (0.2-0.4M phosphate buffer) have been determined. The values of k obs indicate that the rate of photolysis of RF is promoted by divalent and trivalent metal ions. The second-order rate constants (k' ) for the interaction of metal ions with RF are in the order: Zn 2+ >Mg 2+ >Pb 2+ >Mn 2+ >Cu 2+ >Cd 2+ >Fe 2+ >Ca 2+ >Fe 3+ >Co 2+ >Ni 2+ >Ag + . In phosphate buffer (0.2-0.4M), an increase in the metal ion concentration leads to a decrease in the formation of LC compared to that of CDRF by different pathways. The photoproducts of RF have been identified and RF and the photoproducts have simultaneously been assayed by a multicomponent spectrometric method. The mode of photolysis of RF in metal-RF complexes has been discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Heavy metal ion adsorption onto polypyrrole-impregnated porous carbon.

    Science.gov (United States)

    Choi, Moonjung; Jang, Jyongsik

    2008-09-01

    Polypyrrole-impregnated porous carbon was readily synthesized using vapor infiltration polymerization of pyrrole monomers. The results show that the functionalized polymer layer was successfully coated onto the pore surface of carbon without collapse of mesoporous structure. The modified porous carbon exhibited an improved complexation affinity for heavy metal ions such as mercury, lead, and silver ions due to the amine group of polypyrrole. The introduced polypyrrole layer could provide the surface modification to be applied for heavy metal ion adsorbents. Especially, polymer-impregnated porous carbon has an enhanced heavy metal ion uptake, which is 20 times higher than that of adsorbents with amine functional groups. Furthermore, the relationship between the coated polymer amount and surface area was also investigated in regard to adsorption capacity.

  1. Investigation of metal ions sorption of brown peat moss powder

    Science.gov (United States)

    Kelus, Nadezhda; Blokhina, Elena; Novikov, Dmitry; Novikova, Yaroslavna; Chuchalin, Vladimir

    2017-11-01

    For regularities research of sorptive extraction of heavy metal ions by cellulose and its derivates from aquatic solution of electrolytes it is necessary to find possible mechanism of sorption process and to choice a model describing this process. The present article investigates the regularities of aliovalent metals sorption on brown peat moss powder. The results show that sorption isotherm of Al3+ ions is described by Freundlich isotherm and sorption isotherms of Na+ i Ni2+ are described by Langmuir isotherm. To identify the mechanisms of brown peat moss powder sorption the IR-spectra of the initial brown peat moss powder samples and brown peat moss powder samples after Ni (II) sorption were studied. Metal ion binding mechanisms by brown peat moss powder points to ion exchange, physical adsorption, and complex formation with hydroxyl and carboxyl groups.

  2. Encapsulation of Metal Cations by the PhePhe Ligand: A Cation-pi Ion Cage

    NARCIS (Netherlands)

    Dunbar, R. C.; Steill, J. D.; Oomens, J.

    2011-01-01

    Structures and binding thermochemistry are investigated for protonated PhePhe and for complexes of PhePhe with the alkaline-earth ions Ba2+ and Ca2+, the alkali-metal ions Li+, Na+, K+, and Cs+, and the transition-metal ion Ag+. The two neighboring aromatic side chains open the possibility of a

  3. Chirality-induced conformational preferences in peptide-metal ion binding revealed by IR spectroscopy

    NARCIS (Netherlands)

    Dunbar, R.C.; Steill, J.D.; Oomens, J.

    2011-01-01

    Chirality reversal of a residue in a peptide can change its mode of binding to a metal ion, as shown here experimentally by gas-phase IR spectroscopy of peptide−metal ion complexes. The binding conformations of Li+, Na+, and H+ with the ll and dl stereoisomers of PhePhe were compared through IR ion

  4. Chirality-Induced Conformational Preferences in Peptide-Metal Ion Binding Revealed by IR Spectroscopy

    NARCIS (Netherlands)

    Dunbar, R. C.; Steill, J. D.; Oomens, J.

    2011-01-01

    Chirality reversal of a residue in a peptide can change its mode of binding to a metal ion, as shown here experimentally by gas-phase IR spectroscopy of peptide metal ion complexes. The binding conformations of Li+, Na+, and H+ with the LL and DL stereoisomers of PhePhe were compared through IR ion

  5. Encapsulation of metal cations by the PhePhe ligand: a cation-pi ion cage

    NARCIS (Netherlands)

    Dunbar, R.C.; Steill, J.D.; Oomens, J.

    2011-01-01

    Structures and binding thermochemistry are investigated for protonated PhePhe and for complexes of PhePhe with the alkaline-earth ions Ba2+ and Ca2+, the alkali-metal ions Li+, Na+, K+, and Cs+, and the transition-metal ion Ag+. The two neighboring aromatic side chains open the possibility of a

  6. Schiff base transition metal complexes for Suzuki–Miyaura cross ...

    Indian Academy of Sciences (India)

    RASHEEDA M ANSARI

    2017-08-19

    Aug 19, 2017 ... Abstract. Schiff base ligand and its complex with iron (Fe), cobalt (Co), nickel (Ni) and copper (Cu) ions were synthesized using 4-aminoacetophenone and salicylaldehyde and characterized. FTIR spectrum shows that bidentate coordination of metal ions with ligand where O, N are electron donating sites of ...

  7. Schiff base transition metal complexes for Suzuki–Miyaura cross ...

    Indian Academy of Sciences (India)

    Schiff base ligand and its complex with iron (Fe), cobalt (Co), nickel (Ni) and copper (Cu) ions were synthesized using 4-aminoacetophenone and salicylaldehyde and characterized. FTIR spectrum shows that bidentate coordination of metal ions with ligand where O, N are electron donating sites of azomethine group.

  8. Schiff base transition metal complexes for Suzuki–Miyaura cross

    Indian Academy of Sciences (India)

    Schiff base ligand and its complex with iron (Fe), cobalt (Co), nickel (Ni) and copper (Cu) ions were synthesized using 4-aminoacetophenone and salicylaldehyde and characterized. FTIR spectrum shows that bidentate coordination of metal ions with ligand where O, N are electron donating sites of azomethine group.

  9. Transition Metal Complexes and Catalysis

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 9. Transition Metal Complexes and Catalysis. Balaji R Jagirdar. General Article Volume 4 Issue 9 ... Author Affiliations. Balaji R Jagirdar1. Department of Inorganic & Physical Chemistry, Indian Institute of Science, Bangalore 560 012, India.

  10. Synthesis and Characterization of 2-(Hydroxyimino-1-(phenylpropylidenethiocarbonohydrazide and its Metal Complexes with Co(II, Ni(II and Cu(II Ions

    Directory of Open Access Journals (Sweden)

    A. Venkatchallam

    2009-01-01

    Full Text Available Synthesis and characterization of 2-(hydroxyimino-1-(phenyl propylidene thiocarbonohydrazide (called ‘HPTCHOPD’ was studied. The synthesized compound having the molecular formula C10H13N5OS, where in isonitrosopropiophenone is reacted with thiocarbonohydrazide in presence of sodium acetate in ethanol-water mixture. The yield which is comprises effecting the reaction in the presence of sodium acetate. Also the present work report a process for producing metal complexes having the formula ML2 and (ML2 Cl, wherein M is the divalent metal cation, like cobalt (Co+2, nickel (Ni+2 and copper (Cu+2. The compound HPTCHOPD is admixed with a basic divalent compound that is halide, mainly chloride of Co+2, Ni+2 and Cu+2 in presence of methanol-water mixture. The metal complexes so produced are characterized on the basis of spectral, elemental and magnetic analysis; reveal interesting geometries and bonding features. The data suggested square planar geometry for Co+2 complex, a distorted tetrahedral/square planar-octahedral geometry for Ni+2 complex and a bridged structure for Cu+2 complex.

  11. Upgraded vacuum arc ion source for metal ion implantation

    International Nuclear Information System (INIS)

    Nikolaev, A. G.; Oks, E. M.; Savkin, K. P.; Yushkov, G. Yu.; Brown, I. G.

    2012-01-01

    Vacuum arc ion sources have been made and used by a large number of research groups around the world over the past twenty years. The first generation of vacuum arc ion sources (dubbed ''Mevva,'' for metal vapor vacuum arc) was developed at Lawrence Berkeley National Laboratory in the 1980s. This paper considers the design, performance parameters, and some applications of a new modified version of this kind of source which we have called Mevva-V.Ru. The source produces broad beams of metal ions at an extraction voltage of up to 60 kV and a time-averaged ion beam current in the milliampere range. Here, we describe the Mevva-V.Ru vacuum arc ion source that we have developed at Tomsk and summarize its beam characteristics along with some of the applications to which we have put it. We also describe the source performance using compound cathodes.

  12. ION EXCHANGE SOFTENING: EFFECTS ON METAL CONCENTRATIONS

    Science.gov (United States)

    A corrosion control pipe loop study to evaluate the effect of ion exchange water softening on metal leaching from household plumbing materials was conducted on two different water qualities having different pH's and hardness levels. The results showed that removing hardness ions ...

  13. Affinity capillary electrophoresis and density functional theory employed for the characterization of hexaarylbenzene-based receptor complexation with alkali metal ions

    Czech Academy of Sciences Publication Activity Database

    Ehala, Sille; Toman, Petr; Rathore, R.; Makrlík, E.; Kašička, Václav

    2011-01-01

    Roč. 32, č. 9 (2011), s. 981-987 ISSN 0173-0835 R&D Projects: GA ČR(CZ) GA203/08/1428; GA ČR(CZ) GA203/09/0675; GA ČR(CZ) GAP205/10/2280; GA AV ČR 1ET400500402 Institutional research plan: CEZ:AV0Z40550506; CEZ:AV0Z40500505 Keywords : affinity capillary electrophoresis * alkali metal ions * binding constant Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 3.303, year: 2011

  14. Stability of complex coacervate core micelles containing metal coordination polymer

    NARCIS (Netherlands)

    Yan, Y.; Keizer, de A.; Cohen Stuart, M.A.; Drechsler, M.; Besseling, N.A.M.

    2008-01-01

    We report on the stability of complex coacervate core micelles, i.e., C3Ms (or PIC, BIC micelles), containing metal coordination polymers. In aqueous solutions these micelles are formed between charged-neutral diblock copolymers and oppositely charged coordination polymers formed from metal ions and

  15. Biological activities of some Fluoroquinolones-metal complexes ...

    African Journals Online (AJOL)

    Background: Metal ions play a vital role in the design of more biologically active drugs. Aim: The paper reviewed the antimicrobial, toxicological and DNA cleavage studies of some synthesized metal complexes of fluoroquinolone antibiotics. Materials and Methods: Literature searches were done using scientific databases.

  16. Investigations on Green Preparation of Heavy Metal Saponin Complexes

    Directory of Open Access Journals (Sweden)

    Maher Abed el Aziz

    2017-04-01

    Full Text Available Green preparation of heavy metal saponin complexes has been successfully optimized by direct combination between crude extract of Olea Europaea and Citrus Aurantium with divalent heavy metals, Pb2+ and Cd2+. The main operating factors affecting preparation process were investigated and evaluated in terms of setting time, heavy metal ion concentration, crude extract concentration, and pH value of the medium. Saponin complexes had been prepared using the optimum concentrations of heavy metal ions (120 ppm and optimum concentration of crude extract (600 ppm in the slightly alkaline medium. The presence of saponin in plants was confirmed by chemical tests and UV/Vis analysis. Amount of prepared saponine complexes has the order: (Pb/Olive > (Cd/Olive > (Pb/Citrus > (Cd/Citrus. In this process, saponins was isolated and heavy metals were eliminated by a simple, faster and without a huge amount of solvents. The process itself seems to be green isolation of saponins from plants, green removal of heavy metal from aqueous waste streams or green preparation of heavy metal saponin complexes. The process exhibits several advantages and hence benefits, among of them are shorter setting time, higher volume reduction factor and no chemical or solvents used. Direct combination between heavy metals solution and plant extract solution to prepare saponin complex could be considered three in one process. During preparation of the complex, saponin isolated or extracted by heavy metals and the heavy metal eliminated or removed by saponin solution.

  17. Smart responsive microcapsules capable of recognizing heavy metal ions.

    Science.gov (United States)

    Pi, Shuo-Wei; Ju, Xiao-Jie; Wu, Han-Guang; Xie, Rui; Chu, Liang-Yin

    2010-09-15

    Smart responsive microcapsules capable of recognizing heavy metal ions are successfully prepared with oil-in-water-in-oil double emulsions as templates for polymerization in this study. The microcapsules are featured with thin poly(N-isopropylacrylamide-co-benzo-18-crown-6-acrylamide) (P(NIPAM-co-BCAm)) membranes, and they can selectively recognize special heavy metal ions such as barium(II) or lead(II) ions very well due to the "host-guest" complexation between the BCAm receptors and barium(II) or lead(II) ions. The stable BCAm/Ba(2+) or BCAm/Pb(2+) complexes in the P(NIPAM-co-BCAm) membrane cause a positive shift of the volume phase transition temperature of the crosslinked P(NIPAM-co-BCAm) hydrogel to a higher temperature, and the repulsion among the charged BCAm/Ba(2+) or BCAm/Pb(2+) complexes and the osmotic pressure within the P(NIPAM-co-BCAm) membranes result in the swelling of microcapsules. Induced by recognizing barium(II) or lead(II) ions, the prepared microcapsules with P(NIPAM-co-BCAm) membranes exhibit isothermal and significant swelling not only in outer and inner diameters but also in the membrane thickness. The proposed microcapsules in this study are highly attractive for developing smart sensors and/or carriers for detection and/or elimination of heavy metal ions. Copyright 2010 Elsevier Inc. All rights reserved.

  18. [Metal ions: important co-players in aseptic loosening].

    Science.gov (United States)

    Cadosch, D; Schlett, C L; Gautschi, O P; Frei, H C; Filgueira, L

    2010-08-01

    The aims of this review were to discuss the different mechanisms of biocorrosion of orthopaedic metal implants in the human body, as well as the effects of the released metal ions on bone metabolism and the immune system in regard to their involvement in the pathophysiological mechanisms of aseptic loosening and metal hypersensitivity. Implant failure due to aseptic loosening is thought to occur in about 10-15% of cases. A review of the literature (using PubMed with the search terms: biocorrosion, metal ions and bone metabolism) was performed. Additionally, we discuss our research results in the field of aseptic loosening. Despite a great effort in developing new implants, metal devices used in orthopaedic and trauma surgery remain prone to biocorrosion by several mechanisms including the direct corrosion by osteoclasts, leading to the production of significant amounts of wear particles and metal ions. In addition to the well documented increased osteolytic activity caused by large (in the nanometer range) wear particles, increasing evidence strongly suggests that the released metal ions contribute to the pathophysiological mechanism of aseptic loosening. Metal ions stimulate both the immune system and bone metabolism through a series of direct and indirect pathways leading to an increased osteolytic activity at the bone-implant interface. To date, revision surgery remains the only option for the treatment of a failed orthopaedic implant caused by aseptic loosening. A better understanding of the complex pathophysiological mechanisms (including the effects caused by the released metal ions) of aseptic loosening may have a significant potential in developing novel implants and therapies in order to reduce the incidence of this complication. Georg Thieme Verlag KG Stuttgart, New York.

  19. Metal vapor vacuum arc ion sources

    International Nuclear Information System (INIS)

    Brown, I.G.; Dickinson, M.R.; Galvin, J.E.; Godechot, X.; MacGill, R.A.

    1990-06-01

    We have developed a family of metal vapor vacuum are (MEVVA) high current metal ion sources. The sources were initially developed for the production of high current beams of metal ions for heavy ion synchrotron injection for basic nuclear physics research; more recently they have also been used for metal ion implantation. A number of different embodiments of the source have been developed for these specific applications. Presently the sources operate in a pulsed mode, with pulse width of order 1 ms and repetition rate up to 100 pps. Beam extraction voltage is up to 100 kV, and since the ions produced in the vacuum arc plasma are in general multiply ionized the ion energy is up to several hundred keV. Beam current is up to several Amperes peak and around 10 mA time averaged delivered onto target. Nearly all of the solid metals of the Periodic Table have been use to produce beam. A number of novel features have been incorporated into the sources, including multiple cathodes and the ability to switch between up to 18 separate cathode materials simply and quickly, and a broad beam source version as well as miniature versions. here we review the source designs and their performance. 45 refs., 7 figs

  20. Studies on complexation of a tridentate ONS Schiff base with lighter and heavier metals ions, and investigation into their biological properties

    International Nuclear Information System (INIS)

    Tarafder, M.T.H.; Ali, A.M.; Juan, W.D.; Crouse, K.A.; Silong, S.

    1999-05-01

    Several new complexes of a tridentate ONS Schiff base derived from the condensation of S-benzyldithiocarbazate with salicylaldehyde have been characterised by elemental analyses, molar conductivity measurements, infrared, and electronic spectral studies. The tridentate Schiff base (HONSH) behaves as a dinegatively charged ligand coordinating through the thiolo sulphur, the azomethine nitrogen atom and the hydroxyl oxygen atom. It forms mono-ligand complexes of the general formula, [M(ONS)X], [M = Ni(II), Cu(II), Cr(III), Sb(III), Zn(II), Zr(IV) or U(VI) and X = H 2 O, Cl]. The ligand produced bis-chelated complex with Th(IV) of composition, [Th(ONS) 2 ]. Square-planar structures were proposed for the Ni(II) and Cu(II) complexes. Antimicrobial tests indicated that the Schiff base and five of the metal complexes of Cu(II), Ni(II), U(VI), Zn(II) and Sb(III) were found to be strongly active against bacteria. Ni(II) and Sb(III) complexes were the most effective against Pseudomonas aeruginosa (gram negative) while the Cu(II) complex proved to be the best against Bacillus cereus (gram positive bacteria). Antifungal activities were also noted with the Schiff base and the U(VI) complex. These compounds have shown results against Candida albicans fungi. But none of these compounds were effective against Aspergillus ochraceous fungi. (author)

  1. Metal ions as inflammatory initiators of osteolysis.

    Science.gov (United States)

    Magone, Kevin; Luckenbill, Daniel; Goswami, Tarun

    2015-05-01

    Osteolysis and aseptic loosening currently contribute 75 % of implant failures. Furthermore, with over four million joint replacements projected to be performed in the United States annually, osteolysis and aseptic loosening may continue to pose a significant morbidity. This paper reviews the osteolysis cascade leading to osteoclast activation and bone resorption at the biochemical level. Additionally, the metal ion release mechanism from metallic implants is elucidated. Even though metal ions are not the predominating initiator of osteolysis, they do increase the concentration of key inflammatory cytokines that stimulate osteoclasts and prove to be a contributor to osteolysis and aseptic loosening. Osteolysis is a competitive mechanism among a number of biological reactions, which includes debris release, macrophage and osteoclast activation, an inflammatory response as well as metal ion release. Pharmacological therapy for component loosening has also been reviewed. A non-surgical treatment of osteolysis has not been found in the literature and thus may become an area of future research. Even though this research is warranted, comprehensively understanding the immune response to orthopedic implants and their metallic ions, and thus, creating improved prostheses appears to be the most cost-effective approach to decrease the morbidity related to osteolysis and to design implants with greater longevity. The ionic forms, cytokines, toxicity, gene expression, biological effects, and hypersensitivity responses of metallic elements from metal implants are summarized as well.

  2. Studies on mixed ligand complexes of lanthanide (III) ions

    International Nuclear Information System (INIS)

    Rajendran, G.; Usha Devi, K.G.

    2002-01-01

    As part of our research programme, we have prepared and characterized a few nitrato, thiocyanato and perchlorato complexes of lanthanide(III) ions with ligands, viz., a Schiff base derived from p-anisidine and vanillin and diphenyl sulphoxide. The complexes were characterized by the measurement of electrical conductances and magnetic susceptibilities, molecular mass and metal percentage and spectral analysis. The thermal decompositions were studied by TG and DTG techniques. The thiocyanato complexes were prepared by substitution method from nitrato complexes. p-Anisidine-vanillin (HDDA) and diphenyl sulphoxide (DPSO) are coordinated to the metal ion in unidentate fashion. All the anions were involved in coordination in these complexes. Thus they were found to have non- electrolytic behaviour with composition [Ln(HDDA) 2 (DPSO)X 3 ] where X = NO 3 ) or SCN perchlorato complexes were prepared from metal perchlorate as done in the case of nitrato complexes. They were found to have electrical conductance which corresponds to 1 : 1 electrolyte. Hence one of the perchlorate ions is outside the coordination sphere. The composition of this complex is found to be [Ln(HDDA) 3 (DPSO)(ClO 4 ) 2 ]ClO 4 . (author)

  3. Mixed metal complexes of isoniazid and ascorbic acid: chelation ...

    African Journals Online (AJOL)

    Novel mixed complexes of isoniazid and ascorbic acid have been synthesized and characterized using infrared, electronic absorption data, elemental analysis, molar conductivity, melting point, thin layer chromatography and solubility. The metal ions involved in the complex formation are Cu2+, Zn2+ and Cd2+. The melting ...

  4. Ion beam analysis of metal ion implanted surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evans, P.J.; Chu, J.W.; Johnson, E.P.; Noorman, J.T. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Sood, D.K. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Ion implantation is an established method for altering the surface properties of many materials. While a variety of analytical techniques are available for the characterisation of implanted surfaces, those based on particle accelerators such as Rutherford backscattering (RBS) and nuclear reaction analysis (NRA) provide some of the most useful and powerful for this purpose. Application of the latter techniques to metal ion implantation research at ANSTO will be described with particular reference to specific examples from recent studies. Where possible, the information obtained from ion beam analysis will be compared with that derived from other techniques such as Energy Dispersive X-ray (EDX) and Auger spectroscopies. 4 refs., 5 figs.

  5. Neutralization by metal ions of the toxicity of sodium selenide.

    Directory of Open Access Journals (Sweden)

    Marc Dauplais

    Full Text Available Inert metal-selenide colloids are found in animals. They are believed to afford cross-protection against the toxicities of both metals and selenocompounds. Here, the toxicities of metal salt and sodium selenide mixtures were systematically studied using the death rate of Saccharomyces cerevisiae cells as an indicator. In parallel, the abilities of these mixtures to produce colloids were assessed. Studied metal cations could be classified in three groups: (i metal ions that protect cells against selenium toxicity and form insoluble colloids with selenide (Ag⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺ and Zn²⁺, (ii metal ions which protect cells by producing insoluble metal-selenide complexes and by catalyzing hydrogen selenide oxidation in the presence of dioxygen (Co²⁺ and Ni²⁺ and, finally, (iii metal ions which do not afford protection and do not interact (Ca²⁺, Mg²⁺, Mn²⁺ or weakly interact (Fe²⁺ with selenide under the assayed conditions. When occurring, the insoluble complexes formed from divalent metal ions and selenide contained equimolar amounts of metal and selenium atoms. With the monovalent silver ion, the complex contained two silver atoms per selenium atom. Next, because selenides are compounds prone to oxidation, the stabilities of the above colloids were evaluated under oxidizing conditions. 5,5'-dithiobis-(2-nitrobenzoic acid (DTNB, the reduction of which can be optically followed, was used to promote selenide oxidation. Complexes with cadmium, copper, lead, mercury or silver resisted dissolution by DTNB treatment over several hours. With nickel and cobalt, partial oxidation by DTNB occurred. On the other hand, when starting from ZnSe or FeSe complexes, full decompositions were obtained within a few tens of minutes. The above properties possibly explain why ZnSe and FeSe nanoparticles were not detected in animals exposed to selenocompounds.

  6. TDPAC studies on metal-complex ferrimagnets

    Energy Technology Data Exchange (ETDEWEB)

    Ohkubo, Yoshitaka [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.; Abe, Shizuko; Okada, Takuya [and others

    1997-03-01

    TDPAC spectra of {sup 117}In (left-arrow {sup 117}Cd) and {sup 111}Cd (left-arrow {sup 111m}Cd) in the mixed metal complex N(C{sub 4}H{sub 9}){sub 4}(M(II)Fe(III)(C{sub 2}O{sub 4}){sub 3})(M=Fe,Ni), the related substraces and LiNbO{sub 3} have been studied. In this paper, pure potassium iron (III) oxalate was prepared and mixed metal complexes were synthesized by changing amount of reagents and the order added, then observed by TDPAC. 2 mol%Cd was dispersed throughout potassium iron oxalate and potassium nickel oxalate, formulating M(II){sub 0.98}Cd(II){sub 0.02}C{sub 2}O{sub 4}{center_dot}2H{sub 2}O (M=Fe, Ni) with the same crystal structure. The formation reaction of mixed metal complex-Fe(II) was faster than that of iron oxalate. Its mixed metal complex-Ni(II) was slower than that of iron oxalate. The rate of quadrupole oscillation was obtained by {omega}{sub Q}({sup 117}In)=67.3 Mrad/s and {omega}{sub Q}({sup 111}Cd)=29.7 Mrad/s of which values were determined by TDPAC spectra of {sup 117}In and {sup 111}Cd in LiNbO{sub 3} at 4K. The value showed pure ion bond of oxygen coordinated with {sup 117}In and {sup 111}Cd. 0.08 {eta} was determined by TDPAC spectrum of {sup 111}Cd(left-arrow {sup 111m}Cd). The rate of {omega}{sub Q} of mixed metal oxalate complex was larger than 2.3, indicating 5s and 5p orbital electron took part in bond of oxygen of oxalic acid or approaching oxygen ion to In nucleus depend on the structual relaxation in decaying of {sup 117}In(left-arrow {sup 117}Cd). (S.Y.)

  7. Study of the Interactions Between Transition Metal Ions and Peptides by CALIFORNIUM-252 Plasma Desorption Mass Spectrometry

    Science.gov (United States)

    Hu, Zhaohong

    This dissertation focuses on the study of interactions between transition metal ions (Cu(II), Zn(II), Pd(II), Pt(II)) and peptides (bradykinins and angiotensins). Chapter I provides an overview on the fundamental issues related to and techniques used for studying transition metal ion -peptide/protein complexes. It also reviews different mass spectroscopic techniques used for metal ion-peptide studies. Chapter II delineates the principle of ^{252 }Cf-PDMS instrumentation and the sample preparation methods utilized for this dissertation research. In order to study metal ion-peptide complexes with PDMS, it is essential to define the relationship between complex structures identified from PD mass spectra and complexes formed in solution phase. Chapter III includes the studies of the effects of solution conditions on the detection of metal ion-peptide complexes in PDMS. Solution pH is the most important factor for determining the formation of a complex. Reaction time, reactant concentration, and reaction temperature all display distinct influences on PDMS results. It demonstrates that the PDMS results are closely correlated with the complexes pre-formed in aqueous solution. Chapter IV provides ample spectroscopic data on peptides and their metal ion complexes. The metal ion -containing molecular ions observed provide information on numbers of metal ion-binding sites in a peptide and metal ion-affinity of the peptide. By analyzing fragmentation patterns, amino acid residues and functional groups involved in metal ion binding in a peptide can be identified.

  8. Role of metal ions in the destruction of TATP: theoretical considerations.

    Science.gov (United States)

    Dubnikova, Faina; Kosloff, Ronnie; Oxley, Jimmie C; Smith, James L; Zeiri, Yehuda

    2011-09-29

    The safe decomposition of solid TATP (triacetone triperoxide) explosive is examined theoretically. The route to destruction starts with formation of metal complexes between a metal ion and the TATP molecule. The second step is decomposition of the molecules into stable final products. We examined the structure and stability of both metal ion (including Na(+), Cu(+), Cu(2+), Co(2+), and Zn(2+)) and proton complexes with TATP using quantum chemical calculations at the DFT-PBE0 level of theory. In addition, for each ion complex, we determined the initial steps in the pathway to decomposition together with the associated transition states. We find that the products of decomposition, in particular, acetone, are also stabilized by ion metal complexes. In agreement with experiment, we find the best candidates for metal ion induced decomposition are Cu(2+) and Zn(2+).

  9. Removal and recovery of metal ions from process and waste streams using polymer filtration

    International Nuclear Information System (INIS)

    Jarvinen, G.D.; Smith, B.F.; Robison, T.W.; Kraus, K.M.; Thompson, J.A.

    1999-01-01

    Polymer Filtration (PF) is an innovative, selective metal removal technology. Chelating, water-soluble polymers are used to selectively bind the desired metal ions and ultrafiltration is used to concentrate the polymer-metal complex producing a permeate with low levels of the targeted metal ion. When applied to the treatment of industrial metal-bearing aqueous process streams, the permeate water can often be reused within the process and the metal ions reclaimed. This technology is applicable to many types of industrial aqueous streams with widely varying chemistries. Application of PF to aqueous streams from nuclear materials processing and electroplating operations will be described

  10. Adsorption of Heavy Metal Ions from Aqueous Solutions by Bentonite Nanocomposites.

    Science.gov (United States)

    Ma, Jing; Su, Guojun; Zhang, Xueping; Huang, Wen

    2016-08-01

    A series of bentonite nanocomposites have been synthesized by modifying bentonite with hexadecyltrimethylammonium bromide (CTMAB) and the common complexing agents, complexone (ethylene diamine tetraacetic acid, EDTA) or mercaptocomplexant (2-Mercaptobenzothiazole, MBT). These adsorbents are used to remove heavy metal ions (Cu(2+), Zn(2+), Mn(2+),Co(2+)). The Bent-CTMAB-MBT adsorbed metal ions are higher than Bent-CTMAB-EDTA under the same ion concentration in AAS. Compared with the single ion system, the adsorption of the mixed ion system of Cu(2+), Zn(2+), Mn(2+), Co(2+) had decreased differently. In the mixed system, the adsorption of Mn(2+) is significantly lower, but the adsorption of Cu(2+) was highest. The adsorption sequence of these four metal ions was Cu(2+) > Zn(2+) > Co(2+) > Mn(2+), and the selective adsorption was closely related to the hydration energy of heavy metal ions. We could remove more metal ions in different stages with the adsorption sequence.

  11. New Proton-Ionizable, Calixarene-Based Ligands for Selective Metal Ion Separations

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, Richard A.

    2012-06-04

    The project objective was the discovery of new ligands for performing metal ion separations. The research effort entailed the preparation of new metal ion complexing agents and polymers and their evaluation in metal ion separation processes of solvent extraction, synthetic liquid membrane transport, and sorption. Structural variations in acyclic, cyclic, and bicyclic organic ligands were used to probe their influence upon the efficiency and selectivity with which metal ion separations can be performed. A unifying feature of the ligand structures is the presence of one (or more) side arm with a pendent acidic function. When a metal ion is complexed within the central cavity of the ligand, ionization of the side arm(s) produces the requisite anion(s) for formation of an overall electroneutral complex. This markedly enhances extraction/transport efficiency for separations in which movement of aqueous phase anions of chloride, nitrate, or sulfate into an organic medium would be required. Through systematic structural variations, new ligands have been developed for efficient and selective separations of monovalent metal ions (e.g., alkali metal, silver, and thallium cations) and of divalent metal ion species (e.g., alkaline earth metal, lead, and mercury cations). Research results obtained in these fundamental investigations provide important insight for the design and development of ligands suitable for practical metal ion separation applications.

  12. Lability of nanoparticulate metal complexes in electrochemical speciation analysis

    DEFF Research Database (Denmark)

    van Leeuwen, Herman P.; Town, Raewyn M.

    2016-01-01

    equilibrium with the reduced concentration of the electroactive free M2+ in its diffusion layer. Since the metal ion binding sites are confined to the NP body, the conventional reaction layer in the form of a layer adjacent to the electrode surface is immaterial. Instead an intraparticulate reaction zone may...... of the electrochemical technique is crucial in the lability towards the electrode surface. In contrast, for nanoparticulate complexes it is the dynamics of the exchange of the electroactive metal ion with the surrounding medium that governs the effective lability towards the electrode surface.......Lability concepts are elaborated for metal complexes with soft (3D) and hard (2D) aqueous nanoparticles. In the presence of a non-equilibrium sensor, e.g. a voltammetric electrode, the notion of lability for nanoparticulate metal complexes, M-NP, reflects the ability of the M-NP to maintain...

  13. Current Status of the Daejeon Ion Accelerator Complex at KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Sung-Ryul; Chang, Dae-Sik; Hwang, Churl-Kew; Lee, Seok-Kwan; Jin, Jeong-Tae; Oh, Byung-Hoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The Daejeon ion accelerator complex (DIAC) is being constructed at Korea atomic energy research institute (KAERI) in order to fulfill an increasing demand for heavy ion beam facilities for various purposes including structural material study, biological research and nanomaterial treatment. The accelerators in the DIAC are designed to produce heavy ion beams with energies up to 1 MeV/u and beam currents up to 300 μA. [1–4] In this article, current status of the DIAC construction is presented and discussed. The DIAC facilities are designed to handle stable non-radioactive beams. According to user demand, the separated two ECR sources (i.e., an 18 GHz KEK – the high energy accelerator research organization ECR ion source with a metal oven and a 14.5 GHz KAERI ECR ion source) together with low energy beam transport line (LEBT) can supply linacs with both metal and non-metal ions. From the successful full-power test results, we confirmed that the IH and RFQ linacs work properly and then they are ready to accelerate heavy ions up to 1.09 MeV/nucleon. Since all tests and reorganization of the integrated control system were successful, it is supposed that the DIAC is now ready for beam tuning. Presently, construction of radiation shielded walls and radiation safety licensing are now in progress.

  14. Analysis of Supercritical-Extracted Chelated Metal Ions From Mixed Organic-Inorganic Samples

    Science.gov (United States)

    Sinha, Mahadeva P. (Inventor)

    1996-01-01

    Organic and inorganic contaminants of an environmental sample are analyzed by the same GC-MS instrument by adding an oxidizing agent to the sample to oxidize metal or metal compounds to form metal ions. The metal ions are converted to chelate complexes and the chelate complexes are extracted into a supercritical fluid such as CO2. The metal chelate extract after flowing through a restrictor tube is directly injected into the ionization chamber of a mass spectrometer, preferably containing a refractory metal filament such as rhenium to fragment the complex to release metal ions which are detected. This provides a fast, economical method for the analysis of metal contaminants in a sample and can be automated. An organic extract of the sample in conventional or supercritical fluid solvents can be detected in the same mass spectrometer, preferably after separation in a supercritical fluid chromatograph.

  15. Application of monocarboxylic acids for the extraction of metal ions-literature survey

    International Nuclear Information System (INIS)

    Brzozka, Z.; Rozycki, C.

    1980-01-01

    In the paper there is presented a literature review concerning the application of monocarboxylic acids for extraction of metal ions. The following problems are discussed: characteristic of monocarboxylic acids and their mixtures, the equilibria between the acid solution in organic solvent and aqueous phase, the mechanism of acid partition, complexes of carboxylic acids and metal ions in aqueous phase, mechanism of extraction by means of carboxylic acids as well as the problems concerning the extraction of individual metal ions. Data about the extraction of metal ions are presented in table. The 138 references are given. (author)

  16. Development of an Electrochemical Metal-Ion Biosensor Using Self-Assembled Peptide Nanofibrils

    DEFF Research Database (Denmark)

    Viguier, Bruno; Zor, Kinga; Kasotakis, Emmanouil

    2011-01-01

    This article describes the combination of self-assembled peptide nanofibrils with metal electrodes for the development of an electrochemical metal-ion biosensor. The biological nanofibrils were immobilized on gold electrodes and used as biorecognition elements for the complexation with copper ion...

  17. Dinuclear metal complexes derived from a bis-chelating heterocyclic ...

    African Journals Online (AJOL)

    The analytical data indicate that the metal to ligand ratio is 2:1 in all the complexes. The coordination of triethylamine, water and chloride ion are observed in the Co(II), Zn(II) and Ni(II) complexes. The absence of ionizable or coordinated chloride in Cu(II) complex is a notable feature. Octahedral geometry for Co(II), Zn(II) and ...

  18. Thiophilic metal ion rescue of phosphorothioate interference within the Tetrahymena ribozyme P4-P6 domain.

    OpenAIRE

    Basu, S; Strobel, S A

    1999-01-01

    Divalent metal ions are essential for the folding and catalytic activities of many RNAs. A commonly employed biochemical technique to identify metal-binding sites in RNA is the rescue of Rp alpha-phosphorothioate (PS) interference by the addition of soft divalent metal ions. To access the ability of such experiments to accurately identify metal-ion coordinations within a complex RNA fold, we report metal-rescue results from the Tetrahymena group I intron P4-P6 domain, where the location and c...

  19. Fluorescence signalling of the transition metal ions: Design strategy ...

    Indian Academy of Sciences (India)

    on fluorescence signalling systems for the transition metal ions. It is shown that even simple fluorophore-spacer-receptor systems can display excellent off-on fluorescence signalling towards the quenching metal ions when the fluorophore ...

  20. Polyatomic ions from a high current ion implanter driven by a liquid metal ion source

    Science.gov (United States)

    Pilz, W.; Laufer, P.; Tajmar, M.; Böttger, R.; Bischoff, L.

    2017-12-01

    High current liquid metal ion sources are well known and found their first application as field emission electric propulsion thrusters in space technology. The aim of this work is the adaption of such kind of sources in broad ion beam technology. Surface patterning based on self-organized nano-structures on, e.g., semiconductor materials formed by heavy mono- or polyatomic ion irradiation from liquid metal (alloy) ion sources (LMAISs) is a very promising technique. LMAISs are nearly the only type of sources delivering polyatomic ions from about half of the periodic table elements. To overcome the lack of only very small treated areas by applying a focused ion beam equipped with such sources, the technology taken from space propulsion systems was transferred into a large single-end ion implanter. The main component is an ion beam injector based on high current LMAISs combined with suited ion optics allocating ion currents in the μA range in a nearly parallel beam of a few mm in diameter. Different types of LMAIS (needle, porous emitter, and capillary) are presented and characterized. The ion beam injector design is specified as well as the implementation of this module into a 200 kV high current ion implanter operating at the HZDR Ion Beam Center. Finally, the obtained results of large area surface modification of Ge using polyatomic Bi2+ ions at room temperature from a GaBi capillary LMAIS will be presented and discussed.

  1. The role of metal ion-ligand interactions during divalent metal ion adsorption.

    Science.gov (United States)

    Eldridge, Daniel S; Crawford, Russell J; Harding, Ian H

    2015-09-15

    A suite of seven different divalent metal ions (Ca(II), Cd(II), Cu(II), Mg(II), Ni(II), Pb(II), Zn(II)) was adsorbed from solution onto two Fe2O3 samples, quartz SiO2 and three different amphoteric polystyrene latices (containing amine and carboxyl functional groups). For the metal oxides, a high correlation was observed between the pH at which 50% of the metal was removed from solution (pH50) and the first hydrolysis constant for the metal ion (pK1). For the polystyrene latices, a much higher correlation was observed between the pH50 and pKc (equilibrium constant describing metal-carboxyl affinity) as opposed to pK1. These observations provide evidence of a strong relationship that exists between a metal's affinity for a particular ligand in solution and for that metal ion's affinity for the same ligand present as part of an adsorbing surface. The isoelectric point of the amphoteric latex surface can be increased by decreasing the carboxyl content of the latex surface. For all 7 metal ions, this resulted in a substantial decrease, for any given pH, in adsorption. We suggest that this may be partly due to the decreased carboxyl content, but is dominantly attributable to the presence of less favorable electrostatic conditions. This, in turn, demonstrates that electrostatics play a controlling role in metal ion adsorption onto amphoteric latex surfaces and, in addition to the nature of the metal ion, also controls the pH at which adsorption takes place. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  2. Kinetics of the reactions of hydrated electrons with metal complexes

    International Nuclear Information System (INIS)

    Korsse, J.

    1983-01-01

    The reactivity of the hydrated electron towards metal complexes is considered. Experiments are described involving metal EDTA and similar complexes. The metal ions studied are mainly Ni 2+ , Co 2+ and Cu 2+ . Rates of the reactions of the complexes with e - (aq) were measured using the pulse radiolysis technique. It is shown that the reactions of e - (aq) with the copper complexes display unusually small kinetic salt effects. The results suggest long-range electron transfer by tunneling. A tunneling model is presented and the experimental results are discussed in terms of this model. Results of approximate molecular orbital calculations of some redox potentials are given, for EDTA chelates as well as for series of hexacyano and hexaquo complexes. Finally, equilibrium constants for the formation of ternary complexes are reported. (Auth./G.J.P.)

  3. Heavy metal ion uptake properties of polystyrene-supported ...

    Indian Academy of Sciences (India)

    Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion ...

  4. Engineering of microorganisms towards recovery of rare metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Kuroda, Kouichi; Ueda, Mitsuyoshi [Kyoto Univ. (Japan). Div. of Applied Life Sciences

    2010-06-15

    The bioadsorption of metal ions using microorganisms is an attractive technology for the recovery of rare metal ions as well as removal of toxic heavy metal ions from aqueous solution. In initial attempts, microorganisms with the ability to accumulate metal ions were isolated from nature and intracellular accumulation was enhanced by the overproduction of metal-binding proteins in the cytoplasm. As an alternative, the cell surface design of microorganisms by cell surface engineering is an emerging strategy for bioadsorption and recovery of metal ions. Cell surface engineering was firstly applied to the construction of a bioadsorbent to adsorb heavy metal ions for bioremediation. Cell surface adsorption of metal ions is rapid and reversible. Therefore, adsorbed metal ions can be easily recovered without cell breakage, and the bioadsorbent can be reused or regenerated. These advantages are suitable for the recovery of rare metal ions. Actually, the cell surface display of a molybdate-binding protein on yeast led to the enhanced adsorption of molybdate, one of the rare metal ions. An additional advantage is that the cell surface display system allows high-throughput screening of protein/peptide libraries owing to the direct evaluation of the displayed protein/peptide without purification and concentration. Therefore, the creation of novel metal-binding protein/ peptide and engineering of microorganisms towards the recovery of rare metal ions could be simultaneously achieved. (orig.)

  5. Spectrophotometric study of some metal ions using some Schiff's bases

    International Nuclear Information System (INIS)

    Elnager, Nawal Mohomed Ibrahim

    2000-05-01

    In this work two schiff bases namely N,N Bis(benzoyl acetone)-o-phenylene diamine (NNBBPD) and N,N Bis(benzoyl acetone)-isopropylene diamine (NNBBAID) were prepared by direct coupling of benzoyl acetone with o-phenylene and isopropylene diamine respectively. The two reagents were identified by IR spectra, thin layer chromatography (TLC) and determination of the percentage of nitrogen contents (N%). It is found that the two reagents form coloured chelates with Fe (II), Fe (III), Cu (II), U (VI), Ni (II) and Co (II). The two reagents were used for the determination of Fe (II), Fe (III) and U (VI). The formulate of these metal ion complexes were obtained using continuous variations, mole ratio and slope ratio methods. Effect of two micelles, namely sodium n-dodecyl sulphate (SDS) and hexadecyl pyridinum broinide monohydrate (HPB) on metal ion complexes were studied. It is found that both of them increase the solubility and the absorbances of the metal ion complexes with variable effects of the absorption maxima. Calibration curves for Fe (II), Fe (II) and U (VI) were obtained in optimum conditions of pH and micelles solutions. (Author)

  6. Structural systematics of some metal complexes with 4,5 ...

    Indian Academy of Sciences (India)

    dafone in dimethyl formamide at 402 nm is found to be quenched in these reported dafone complexes (1-4). Keywords. Transition metal ions; imine ligand; crystal structure; fluorescence. 1. Introduction. Design and synthesis of coordination compounds of different nuclearity ... hydroxide (E Merck, India), cobalt(II) perchlorate.

  7. Rhodium complexes of a chelating ligand with imidazol-2-ylidene and pyridin-2-ylidene donors: the effect of C-metalation of nicotinamide groups on uptake of hydride ion.

    Science.gov (United States)

    McSkimming, Alex; Ball, Graham E; Bhadbhade, Mohan M; Colbran, Stephen B

    2012-02-20

    Rhodium complexes of the imidazolylidene (C-im) N-heterocyclic carbene (NHC) ligand, C-im-pyH(+), bearing a nicotinamide cation substituent (pyH(+)) have been targeted for ligand-centered uptake and delivery of hydride ion. This work reveals that rhodium(I) complexes such as [Rh(C-im-pyH(+))(COD)X][PF(6)] (1, a: X = Cl, b: X = I) undergo facile C-metalation of the nicotinamide ring to afford rhodium complexes of a novel chelate ligand, C,C'-im-py, with coordinated imidazolylidene (C(im)) and pyridylidene (C(py)) NHC-donors. Seven examples were characterized and include rhodium(III) monomers of the general formula [Rh(C,C'-im-py)L(x)I(2)](z+) (2: z = 1, L = H(2)O or solvent, x = 2; 3, 5, 7: z = 0, L = carboxylate, x = 1) and novel rhodium(II) dimers, the anti/syn-isomers of [Rh(2)(C,C'-im-py)(2)(μOAc)(2)I(2)] (4-anti/syn). The NMR data, backed by DFT calculations, is consistent with attribution of the C,C'-im-py ligand as a bis(carbene) donor. Single crystal X-ray diffraction studies are reported for 2, 3, 4-anti, 4-syn and 7. Consistently, within the each complex, the Rh-C(im) bond length is shorter than the Rh-C(py) bond length, which is the opposite trend to that expected based on simple electronic considerations. It is proposed that intramolecular steric interactions imposed by different rings in the rigid C,C'-im-py chelate ligand dictate the observed Rh-C(NHC) bond lengths. Attempts to add hydride to the C-metalated nicotinamide ring in 3 were unsuccessful. The redox behavior of 3 and 4 and, for comparison, an analogous bis(imidazolylidene)rhodium(III) monomer (8), were characterized by cyclic voltammetry, electron paramagnetic resonance (EPR), and UV-vis spectroelectrochemistry. In 3 and 4, the C-metalated nicotinamide ring is found to exhibit a one-electron reduction process at far lower potential (-2.34 V vs. Fc(+)/Fc in acetonitrile) than the two-electron nicotinamide cation-dihydronicotinamide couple found for the corresponding nonmetalated ring (-1.24 V

  8. Some aspects of metallic ion chemistry and dynamics in the mesosphere and thermosphere

    Science.gov (United States)

    Mathews, J. D.

    1987-01-01

    The relationship between the formation of sporadic layers of metallic ion and the dumping of these ions into the upper mesosphere is discussed in terms of the tidal wind, classical (i.e., windshear) and other more complex, perhaps highly nonlinear layer formation mechanisms, and a possible circulation mechanism for these ions. Optical, incoherent scatter radar, rocket, and satellite derived evidence for various layer formation mechanisms and for the metallic ion circulation system is reviewed. The results of simple one dimensional numerical model calculations of sporadic E and intermediate layer formation are presented along with suggestions for more advanced models of intense or blanketing sporadic E. The flux of metallic ions dumped by the tidal wind system into the mesosphere is estimated and compared with estimates of total particle flux of meteoric origin. Possible effects of the metallic ion flux and of meteoric dust on D region ion chemistry are discussed.

  9. Activation of Methane by Gaseous Metal Ions

    Czech Academy of Sciences Publication Activity Database

    Schröder, Detlef

    2010-01-01

    Roč. 49, č. 5 (2010), s. 850-851 ISSN 1433-7851 Grant - others:European Research Council(XE) AdG HORIZOMS Institutional research plan: CEZ:AV0Z40550506 Keywords : C-C coupling * C-H bond activation * gas-phase reactions * metal ions * methane Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 12.730, year: 2010

  10. IDENTIFICATION OF CATALYTIC METAL ION LIGANDS IN RIBOZYMES

    Science.gov (United States)

    Frederiksen, John K.; Piccirilli, Joseph A.

    2012-01-01

    Site-bound metal ions participate in the catalytic mechanisms of many ribozymes. Understanding these mechanisms therefore requires knowledge of the specific ligands on both substrate and ribozyme that coordinate these catalytic metal ions. A number of different structural and biochemical strategies have been developed and refined for identifying metal ion binding sites within ribozymes, and for assessing the catalytic contributions of the metal ions bound at those sites. We review these approaches and provide examples of their application, focusing in particular on metal ion rescue experiments and their roles in the construction of the transition state models for the Tetrahymena group I and RNase P ribozymes. PMID:19651216

  11. Metal ion separations using reactive membranes

    International Nuclear Information System (INIS)

    Way, J.D.

    1993-01-01

    A membrane is a barrier between two phases. If one component of a mixture moves through the membrane faster than another mixture component, a separation can be accomplished. Membranes are used commercially for many applications including gas separations, water purification, particle filtration, and macromolecule separations (Abelson). There are two points to note concerning this definition. First, a membrane is defined based on its function, not the material used to make the membrane. Secondly, a membrane separation is a rate process. The separation is accomplished by a driving force, not by equilibrium between phases. Liquids that are immiscible with the feed and product streams can also be used as membrane materials. Different solutes will have different solubilities and diffusion coefficients in a liquid. The product of the diffusivity and the solubility is known as the permeability coefficient, which is proportional to the solute flux. Differences in permeability coefficient will produce a separation between solutes at constant driving force. Because the diffusion coefficients in liquids are typically orders of magnitude higher than in polymers, a larger flux can be obtained. Further enhancements can be accomplished by adding a nonvolatile complexation agent to the liquid membrane. One can then have either coupled or facilitated transport of metal ions through a liquid membrane. The author describes two implementations of this concept, one involving a liquid membrane supported on a microporous membrane, and the other an emulsion liquid membrane, where separation occurs to internal receiving phases. Applications and costing studies for this technology are reviewed, and a brief summary of some of the problems with liquid membranes is presented

  12. Three Metal Ions Participate in the Reaction Catalyzed by T5 Flap Endonuclease*S⃞

    Science.gov (United States)

    Syson, Karl; Tomlinson, Christopher; Chapados, Brian R.; Sayers, Jon R.; Tainer, John A.; Williams, Nicholas H.; Grasby, Jane A.

    2008-01-01

    Protein nucleases and RNA enzymes depend on divalent metal ions to catalyze the rapid hydrolysis of phosphate diester linkages of nucleic acids during DNA replication, DNA repair, RNA processing, and RNA degradation. These enzymes are widely proposed to catalyze phosphate diester hydrolysis using a “two-metal-ion mechanism.” Yet, analyses of flap endonuclease (FEN) family members, which occur in all domains of life and act in DNA replication and repair, exemplify controversies regarding the classical two-metal-ion mechanism for phosphate diester hydrolysis. Whereas substrate-free structures of FENs identify two active site metal ions, their typical separation of >4 Å appears incompatible with this mechanism. To clarify the roles played by FEN metal ions, we report here a detailed evaluation of the magnesium ion response of T5FEN. Kinetic investigations reveal that overall the T5FEN-catalyzed reaction requires at least three magnesium ions, implying that an additional metal ion is bound. The presence of at least two ions bound with differing affinity is required to catalyze phosphate diester hydrolysis. Analysis of the inhibition of reactions by calcium ions is consistent with a requirement for two viable cofactors (Mg2+ or Mn2+). The apparent substrate association constant is maximized by binding two magnesium ions. This may reflect a metal-dependent unpairing of duplex substrate required to position the scissile phosphate in contact with metal ion(s). The combined results suggest that T5FEN primarily uses a two-metal-ion mechanism for chemical catalysis, but that its overall metallobiochemistry is more complex and requires three ions. PMID:18697748

  13. Ion-induced effects on metallic nanoparticles

    International Nuclear Information System (INIS)

    Klimmer, Andreas

    2010-01-01

    This work deals with the ion-irradiation of metallic nanoparticles in combination with various substrates. Particle diameters were systematically varied within the range of 2.5-14 nm, inter-particle distances range from 30-120 nm. Irradiations were performed with various inert gas ions with energies of 200 keV, resulting in an average ion range larger than the particle dimensions and therefore the effects of irradiation are mainly due to creation of structural defects within the particles and the underlying substrate as well. The main part of this work deals with ion-induced burrowing of metallic nanoparticles into the underlying substrate. The use of micellar nanoparticles with sharp size distribution combined with AFM and TEM analysis allows a much more detailed look at this effect than other works on that topic so far. With respect to the particle properties also a detailed look on the effect of irradiation on the particle structure would be interesting, which might lead to a deliberate influence on magnetic properties, for example. Within the context of this work, first successful experiments were performed on FePt particles, showing a significant reduction of the ordering temperature leading to the magnetically interesting, ordered L1 0 phase. (orig.)

  14. Sensitive metal ions (II) determination with resonance Raman method

    Science.gov (United States)

    Yu, Zhi; Bracero, Lucas A.; Chen, Lei; Song, Wei; Wang, Xu; Zhao, Bing

    2013-03-01

    In this paper, a new proposal for the quantitative evaluation of divalent metal ions (M2+) is developed by the use of the competitive resonance Raman (RR)-based method. Upon excitation with light of the appropriate wavelength (532 nm), a strong electric field is generated that couples with the resonance of the complex (zincon-M2+), increasing the character signals of these complexes, resulting in sensitive detection. Herein, the RR probe, zincon-M2+ complex that the RR intensity gets lower with the decreasing of the M2+ concentration, which leads to the transformation of the Raman information. As a result, by using the proposed RR-based method, we could find the liner calibration curves of Cu2+ and Ni2+, which show the potential in quantitative evaluation of an unknown sample. In addition, the abundant fingerprint information shows that RR leads to the successful analysis of a blended solution, which contains two ions: Cu2+ and Ni2+.

  15. Transparent monolithic metal ion containing nanophase aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Risen, W. M., Jr.; Hu, X.; Ji, S.; Littrell, K.

    1999-12-01

    The formation of monolithic and transparent transition metal containing aerogels has been achieved through cooperative interactions of high molecular weight functionalized carbohydrates and silica precursors, which strongly influence the kinetics of gelation. After initial gelation, subsequent modification of the ligating character of the system, coordination of the group VIII metal ions, and supercritical extraction afford the aerogels. The structures at the nanophase level have been probed by photon and electron transmission and neutron scattering techniques to help elucidate the basis for structural integrity together with the small entity sizes that permit transparency in the visible range. They also help with understanding the chemical reactivities of the metal-containing sites in these very high surface area materials. These results are discussed in connection with new reaction studies.

  16. Alkali metal ion templated transition metal formate framework materials: synthesis, crystal structures, ion migration, and magnetism.

    Science.gov (United States)

    Eikeland, Espen; Lock, Nina; Filsø, Mette; Stingaciu, Marian; Shen, Yanbin; Overgaard, Jacob; Iversen, Bo Brummerstedt

    2014-10-06

    Four transition metal formate coordination polymers with anionic frameworks, namely, Na[Mn(HCOO)3], K[Mn(HCOO)3], Na2[Cu3(HCOO)8], and K2[Cu5(HCOO)12], were synthesized using a mild solution chemistry approach. Multitemperature single-crystal (100-300 K) and powder X-ray diffraction studies of the compounds reveal structures of large diversity ranging from cubic chiral Na-Mn formate to triclinic Na-Cu formate. The structural variety is caused by the nature of the transition metals, the alkali metal ion templation, and the versatility of the formate group, which offers metal-metal coordination through three different O-C-O bridging modes (syn-syn, syn-anti, anti-anti) in addition to metal-metal bridging via a single oxygen atom. The two manganese(II) compounds contain mononuclear, octahedrally coordinated moieties, but the three-dimensional connectivity between the manganese octahedra is very different in the two structures. The two copper frameworks, in contrast, consist of binuclear and mononuclear moieties (Na-Cu formate) and trinuclear and mononuclear moieties (K-Cu formate), respectively. Procrystal electron density analysis of the compounds indicates one-dimensional K(+)-ion conductivity in K-Mn and K-Cu, and the nature of the proposed potassium ion migration is compared with results from similar analysis on known Na(+) and K(+) ion conductors. K-Mn and Na-Mn were tested as cathode materials, but this resulted in poor reversibility due to low conductivity or structural collapse. The magnetic properties of the compounds were studied by vibrating sample magnetometric measurements, and their thermal stabilities were determined by thermogravimetric analysis and differential thermal analysis. Despite structural differences, the metal formates that contain the same transition metal have similar magnetic properties and thermal decomposition pathways, that is, the nature of the transition metal controls the compound properties.

  17. Spectrophotometric determination of some metal ions using hydrazones

    International Nuclear Information System (INIS)

    Mohammed, M. S.

    2000-05-01

    In this research many starting materials were prepared, like methyl salicylate and salicylic acid hydrazide from which different derivatives of hydrazones were synthesized by coupling with carbonyl compounds like benzil monoxime and benzil mono hydrazone which are prepared and others like salicylaldehyde and benzoin. The hydrazones that were synthesized are salicylaldehyde salicylic acid hydrazone, benzoin salicylic acid hydrazone, benzil mono hydrazone salicylic acid hydrazone and benzil monoxime salicylic acid hydrazone. These reagents were determined by different methods, IR spectrophotometric determination, the nitrogen content method and melting point determination. These hydrazones act as ligands for determination of some metal ions by making different coloured complexes that were prepared for eight hydrazones with eight metal ions U (VI), Fe (II), Fe (III), Co (II), V (II), Mo (VI), Ni (II) and Cu (II). These complexes were determined by ultraviolet and visible spectrophotometer (UV/VIS) to detect their absorbance and wavelengths (λ max). The two hydrazones salicylaldehyde salicylic acid-hydrazone and benzoin salicylic acid hydrazone, were selected for determination of five metal ions (Fe (II), Fe (III), U (VI), Ni (II) and Cu (II)), using two micelles sodium n-dodecyl sulphate and pyridinium hexa decyl bromide mono hydrate. Their absorbance and wavelengths were detected using UV/VIS spectrophotometer. (Author)

  18. THE ROLES OF METAL IONS IN REGULATION BY RIBOSWITCHES

    OpenAIRE

    Ferré-D'Amaré, Adrian; Winkler, Wade C.

    2011-01-01

    Metal ions are required by all organisms in order to execute an array of essential molecular functions. They play a critical role in many catalytic mechanisms and structural properties. Proper homeostasis of ions is critical; levels that are aberrantly low or high are deleterious to cellular physiology. To maintain stable intracellular pools, metal ion-sensing regulatory (metalloregulatory) proteins couple metal ion concentration fluctuations with expression of genes encoding for cation trans...

  19. Metallic complexes with glyphosate: a review; Complexos metalicos com o herbicida glifosato: revisao

    Energy Technology Data Exchange (ETDEWEB)

    Coutinho, Claudia F.B.; Mazo, Luiz Henrique [Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. de Quimica]. E-mail: claudiabreda@iqsc.usp.br

    2005-11-15

    We present studies involving metallic ions and the herbicide glyphosate. The metallic complexes of Cu(II), Zn(II), Mn(II), Ni(II), Cd(II), Pb(II), Cr(III), Fe(III), Co(III), ammonium, sodium, Ag(I), alkaline earth metals and of some lanthanides ions are described. The complexes are discussed in terms of their synthesis, identification, stability and structural properties, based on data from the current literature. (author)

  20. Factors governing the metal coordination number in metal complexes from Cambridge Structural Database analyses.

    Science.gov (United States)

    Dudev, Minko; Wang, Jonathan; Dudev, Todor; Lim, Carmay

    2006-02-02

    The metal coordination number (CN) is a key determinant of the structure and properties of metal complexes. It also plays an important role in metal selectivity in certain metalloproteins. Despite its central role, the preferred CN for several metal cations remains ambiguous, and the factors determining the metal CN are not fully understood. Here, we evaluate how the CN depends on (1) the metal's size, charge, and charge-accepting ability for a given set of ligands, and (2) the ligand's size, charge, charge-donating ability, and denticity for a given metal by analyzing the Cambridge Structural Database (CSD) structures of metal ions in the periodic table. The results show that for a given ligand type, the metal's size seems to affect its CN more than its charge, especially if the ligand is neutral, whereas, for a given metal type, the ligand's charge and charge-donating ability appear to affect the metal CN more than the ligand's size. Interestingly, all 98 metal cations surveyed could adopt more than than one CN, and most of them show an apparent preference toward even rather than odd CNs. Furthermore, as compared to the preferred metal CNs observed in the CSD, those in protein binding sites generally remain the same. This implies that the protein matrix (excluding amino acid residues in the metal's first and second coordination shell) does not impose severe geometrical restrictions on the bound metal cation.

  1. Metal-citrate complex transport in Kineococcus radiotolerans.

    Science.gov (United States)

    Huta, Brian P; Miller, Nigel H; Robertson, Eleanor L; Doyle, Robert P

    2018-03-01

    The growth of an organism is highly dependent on the acquisition of carbon and metals, and availability of these nutrients in the environment affects its survival. Organisms can obtain both nutrients simultaneously through proteins of the CitMHS superfamily. Bioinformatic studies suggested a CitMHS gene (Accession number ABS03965.1) in Kineococcus radiotolerans. Radio flux assays following 14-C radiolabelled citrate, either free or complexed to a variety of metal ions, in K. radiotolerans demonstrated internalization of the citrate when bound to select metal ions only, primarily in the form of calcium-citrate. A pH response was also observed, consistent with a permease (ATP independent) mechanism as noted for other CitMHS family members, with greater uptake at pH 7 compared to pH 10. These results confirm the ability of K. radiotolerans to transport complexed citrate. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Role of ammonium ion and transition metals in the formation of secondary organic aerosol and metallo-organic complex within fog processed ambient deliquescent submicron particles collected in central part of Indo-Gangetic Plain.

    Science.gov (United States)

    Singh, Dharmendra Kumar; Gupta, Tarun

    2017-08-01

    In this study we observed the role of ammonium ion (NH 4 + ) and transition metals (Fe, Mn, Cr, and Cu) present in ambient submicron particles in stabilizing and enhancing the yield of water soluble organic carbon (WSOC). A good correlation of WSOC with transition metals and NH 4 + was found (R 2  = 0.87 and 0.71), respectively within foggy episode collected ambient PM 1 (particles having aerodynamic diameter ≤1.0 μm) suggesting plausibleness of alternate oxidation (primarily various carbonyls into their respective organic acids, esters and other derivatives.) and aging mechanisms. Molar concentration of ammonium ion was observed to be exceeded over and above to require in neutralizing the sulphate and nitrate which further hints its role in the neutralization, stabilization and enhancement of subset of WSOC such as water soluble organic acids. Transition metals were further apportioned using enrichment factor analysis. The source of Fe, Mn, and Cr was found to be crustal and Cu was tagged to anthropogenic origin. This study also described the plausible role of significant predictors (Fe and Cu) in the secondary organic aerosol (SOA) formation through effect of Fenton chemistry. Mass-to-charge ratio of identified oxalic acid from our published recent field study (carried out from same sampling location) was used for understanding the possible metallo-organic complex with Fe supports the substantial role of Fe in SOA formation in the deliquescent submicron particles facilitated by aqueous-phase chemistry. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Polyoxometalate coordinated transition metal complexes as ...

    Indian Academy of Sciences (India)

    Keywords. Heptamolybdate type polyoxometalate cluster anion; transition metal coordination complexes; ... industrial chemistry. This oxidation can be divided into three categories: (i) the cleavage of the C=C bond by using the surface of the metal oxide, e.g., osmium or .... supported cobalt complexes (catalysts 1 and 2) pro-.

  4. metal complexes of copper(ii)

    African Journals Online (AJOL)

    Catalytic activity of polymer metal complexes was studied by Vinodkumar and Mathew [3]. Antimicrobial activities of Cu(II), Co(II), Zn (II) Pb (II) oligomer metal complexes was studied by Kaya et al. [4-6]. Thermal ... tetrahydrofuran, methanol, N,N-dimethylformamide, ethanol, dimethylsulfoxide, nitrobenzene, chloroform, ethyl ...

  5. Macrocyclic metal complexes for metalloenzyme mimicry and sensor development.

    Science.gov (United States)

    Joshi, Tanmaya; Graham, Bim; Spiccia, Leone

    2015-08-18

    Examples of proteins that incorporate one or more metal ions within their structure are found within a broad range of classes, including oxidases, oxidoreductases, reductases, proteases, proton transport proteins, electron transfer/transport proteins, storage proteins, lyases, rusticyanins, metallochaperones, sporulation proteins, hydrolases, endopeptidases, luminescent proteins, iron transport proteins, oxygen storage/transport proteins, calcium binding proteins, and monooxygenases. The metal coordination environment therein is often generated from residues inherent to the protein, small exogenous molecules (e.g., aqua ligands) and/or macrocyclic porphyrin units found, for example, in hemoglobin, myoglobin, cytochrome C, cytochrome C oxidase, and vitamin B12. Thus, there continues to be considerable interest in employing macrocyclic metal complexes to construct low-molecular weight models for metallobiosites that mirror essential features of the coordination environment of a bound metal ion without inclusion of the surrounding protein framework. Herein, we review and appraise our research exploring the application of the metal complexes formed by two macrocyclic ligands, 1,4,7-triazacyclononane (tacn) and 1,4,7,10-tetraazacyclododecane (cyclen), and their derivatives in biological inorganic chemistry. Taking advantage of the kinetic inertness and thermodynamic stability of their metal complexes, these macrocyclic scaffolds have been employed in the development of models that aid the understanding of metal ion-binding natural systems, and complexes with potential applications in biomolecule sensing, diagnosis, and therapy. In particular, the focus has been on "coordinatively unsaturated" metal complexes that incorporate a kinetically inert and stable metal-ligand moiety, but which also contain one or more weakly bound ligands, allowing for the reversible binding of guest molecules via the formation and dissociation of coordinate bonds. With regards to mimicking

  6. Structures and physical properties of gaseous metal cationized biological ions.

    Science.gov (United States)

    Burt, Michael B; Fridgen, Travis D

    2012-01-01

    Metal chelation can alter the activity of free biomolecules by modifying their structures or stabilizing higher energy tautomers. In recent years, mass spectrometric techniques have been used to investigate the effects of metal complexation with proteins, nucleobases and nucleotides, where small conformational changes can have significant physiological consequences. In particular, infrared multiple photon dissociation spectroscopy has emerged as an important tool for determining the structure and reactivity of gas-phase ions. Unlike other mass spectrometric approaches, this method is able to directly resolve structural isomers using characteristic vibrational signatures. Other activation and dissociation methods, such as blackbody infrared radiative dissociation or collision-induced dissociation can also reveal information about the thermochemistry and dissociative pathways of these biological ions. This information can then be used to provide information about the structures of the ionic complexes under study. In this article, we review the use of gas-phase techniques in characterizing metal-bound biomolecules. Particular attention will be given to our own contributions, which detail the ability of metal cations to disrupt nucleobase pairs, direct the self-assembly of nucleobase clusters and stabilize non-canonical isomers of amino acids.

  7. Metal Complexation with Chitosan and its Grafted Copolymer

    International Nuclear Information System (INIS)

    Abo-Hussen, A.A.; Elkholy, S.S.; Elsabee, M.Z.

    2005-01-01

    The adsorption of M (II); Co (II), Ni (If), Cu (II), Zn (II) and Cd (II) from aqueous solutions by chitosan flakes and beads have been studied. The maximum up-take of M (II) ions on chitosan beads was greater than on flakes. Batch adsorption experiments were carried out as a function of ph, agitation period and initial concentration of the metal ions. A ph of 6.0 was found to be optimum for M (II) adsorption on chitosan flakes and beads. The uptake of the ions was determined from the changes in its concentration, as measured by ultraviolet and visible spectroscopy. The metal ions uptake of chitosan grafted with vinyl pyridine (VP) is higher than that of the chitosan. The experimental data of the adsorption equilibrium from M (II)-solutions correlated well with the Langmuir and Freundlich equations. Several spectroscopic methods have been used to study the formation of the polymer/metal cation complex. The cation coordination is accompanied by proton displacement off the polymer or by fixation of a hydroxide ion in aqueous solutions. The largest ionic displacement is observed with Cu (II) and Zn (II) demonstrating the largest affinity of chitosan for these ions. The FT-IR spectral of the complexes show that both the amino and hydroxyl groups of chitosan participated in the chelation process. The ESR spectra of Cu-complex show an absorption at gi 2.06, g// = 2.23, A// x 10-4 (cm-1) = 160 and G = 3.8 indicating the formation of square planar structure. The adsorption of M (II) ions followed the sequence Cu (II) > Zn (II) > Cd (II) > Ni (II) > Co (II), this order seems to be independent on the size and the physical form of chitosan. SEM shows small membranous structure on the surface of chitosan flakes as compared to Cu (Il)- chitosan complex. EDTA was used for the desorption studies

  8. Electrospray Ionization Mass Spectrometry: From Cluster Ions to Toxic metal Ions in Biology

    Energy Technology Data Exchange (ETDEWEB)

    Lentz, Nicholas B. [Iowa State Univ., Ames, IA (United States)

    2007-01-01

    This dissertation focused on using electrospray ionization mass spectrometry to study cluster ions and toxic metal ions in biology. In Chapter 2, it was shown that primary, secondary and quarternary amines exhibit different clustering characteristics under identical instrument conditions. Carbon chain length also played a role in cluster ion formation. In Chapters 3 and 4, the effects of solvent types/ratios and various instrumental parameters on cluster ion formation were examined. It was found that instrument interface design also plays a critical role in the cluster ion distribution seen in the mass spectrum. In Chapter 5, ESI-MS was used to investigate toxic metal binding to the [Gln11]-amyloid β-protein fragment (1-16). Pb and Cd bound stronger than Zn, even in the presence of excess Zn. Hg bound weaker than Zn. There are endless options for future work on cluster ions. Any molecule that is poorly ionized in positive ion mode can potentially show an increase in ionization efficiency if an appropriate anion is used to produce a net negative charge. It is possible that drug protein or drug/DNA complexes can also be stabilized by adding counter-ions. This would preserve the solution characteristics of the complex in the gas phase. Once in the gas phase, CID could determine the drug binding location on the biomolecule. There are many research projects regarding toxic metals in biology that have yet to be investigated or even discovered. This is an area of research with an almost endless future because of the changing dynamics of biological systems. What is deemed safe today may show toxic effects in the future. Evolutionary changes in protein structures may render them more susceptible to toxic metal binding. As the understanding of toxicity evolves, so does the demand for new toxic metal research. New instrumentation designs and software make it possible to perform research that could not be done in the past. What was undetectable yesterday will

  9. Heavy metal ion uptake properties of polystyrene-supported ...

    Indian Academy of Sciences (India)

    Unknown

    at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich's equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water. Keywords. Uptake properties; heavy metal ion; selectivity; recyclability. 1.

  10. Systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions

    Science.gov (United States)

    Cooks, Robert Graham; Li, Anyin; Luo, Qingjie

    2017-08-01

    The invention generally relates to systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions. In certain aspects, the invention provides methods that involve providing a metal and a solvent. The methods additionally involve applying voltage to the solvated metal to thereby produce solvent droplets including ions of the metal containing compound, and directing the solvent droplets including the metal ions to a target. In certain embodiments, once at the target, the metal ions can react directly or catalyze reactions.

  11. [Metal ion concentrations in patients with metal-metal bearings in prostheses].

    Science.gov (United States)

    Kretzer, J P; Van Der Straeten, C; Sonntag, R; Müller, U; Streit, M; Moradi, B; Jäger, S; Reinders, J

    2013-08-01

    Increased wear leads to elevated systemic and local metal ion concentrations for patients treated with metal-on-metal bearings. The local metal ion content in the close environment of the joint replacement (e.g. joint aspirate or tissue) is several times higher compared to the systemic metal content (e.g. in blood or serum). As a result of increased metal ion levels, local and systemic effects, such as osteolysis, pseudotumors, sensitization or in rare cases toxicity may occur. Although the definition of a specific threshold to define clinical problems is difficult due to a lack of sensitivity, the systemic metal concentration is frequently measured clinically. Currently a threshold for cobalt and chromium between 4 µg/l and 7 µg/l is under debate. Very high levels (≥ 20 µg/l) or a steady increase over time should be a warning sign; however, metal ion levels should not be interpreted as a single diagnostic tool but rather in the entire context of the clinical, radiological and cross-sectional imaging, metal artefact reduction sequence (MARS) magnetic resonance imaging (MRI), ultrasound and computed tomography (CT) findings.

  12. Transition metal complexes of an isatinic quinolyl hydrazone

    Directory of Open Access Journals (Sweden)

    Seleem Hussein S

    2011-06-01

    Full Text Available Abstract Background The importance of the isatinic quinolyl hydrazones arises from incorporating the quinoline ring with the indole ring in the same compound. Quinoline ring has therapeutic and biological activities. On the other hand, isatin (1H-indole-2,3-dione and its derivatives exhibit a wide range of biological activities. Also, the indole ring occurs in Jasmine flowers and Orange blossoms. Recently, the physiological and biological activities of quinolyl hydrazones arise from their tendency to form metal chelates with transition metal ions. In this context, we have reported to isolate, characterize and study the biological activity of some transition metal complexes of an isatinic quinolyl hydrazone; 3-[2-(4-methyl quinolin-2-ylhydrazono] indolin-2-one. Results Mono- and binuclear as well as dimeric chelates were obtained from the reaction of a new isatinic quinolyl hydrazone with Fe(III, Co(II, Ni(II, Cu(II, VO(II and Pd(II ions. The ligand showed a variety of modes of bonding viz. (NNO2-, (NO- and (NO per each metal ion supporting its ambidentate and flexidentate characters. The mode of bonding and basicity of the ligand depend mainly on the type of the metal cation and its counter anion. All the obtained Pd(II- complexes have the preferable square planar geometry (D4h- symmetry and depend mainly on the mole ratio (M:L. Conclusion The effect of the type of the metal ion for the same anion (Cl- is obvious from either structural diversity of the isolated complexes (Oh, Td and D4h or the various modes of bonding. The isatinic hydrazone uses its lactim form in all complexes (Cl- except complex 5 (SO42- in which it uses its lactam form. The obtained Pd(II- complexes (dimeric, mono- and binuclear are affected by the mole ratio (M:L and have the square planar (D4h geometry. Also, the antimicrobial activity is highly influenced by the nature of the metal ion and the order for S. aureus bacteria is as follows: Nickel(II > Vanadyl(II > Cobalt

  13. Interaction of antihypertensive drug amiloride with metal ions in micellar medium using fluorescence spectroscopy

    International Nuclear Information System (INIS)

    Gujar, Varsha; Pundge, Vijaykumar; Ottoor, Divya

    2015-01-01

    Steady state and life time fluorescence spectroscopy have been employed to study the interaction of antihypertensive drug amiloride with biologically important metal ions i.e. Cu 2+ , Fe 2+ , Ni 2+ and Zn 2+ in various micellar media (anionic SDS (sodium dodecyl sulfate), nonionic TX-100 (triton X-100) and cationic CTAB (cetyl trimethyl ammonium bromide)). It was observed that fluorescence properties of drug remain unaltered in the absence of micellar media with increasing concentration of metal ions. However, addition of Cu 2+ , Fe 2+ and Ni 2+ caused fluorescence quenching of amiloride in the presence of anionic micelle, SDS. Binding of drug with metal ions at the charged micellar interface could be the possible reason for this pH-dependent metal-mediated fluorescence quenching. There were no remarkable changes observed due to metal ions addition when drug was present in cationic and nonionic micellar medium. The binding constant and bimolecular quenching constant were evaluated and compared for the drug–metal complexes using Stern–Volmer equation and fluorescence lifetime values. - Highlights: • Interaction of amiloride with biologically important metal ions, Fe 2+ , Cu 2+ , Ni 2+ and Zn 2+ . • Monitoring the interaction in various micelle at different pH by fluorescence spectroscopy. • Micelles acts as receptor, amiloride as transducer and metal ions as analyte in the present system. • Interaction study provides pH dependent quenching and binding mechanism of drug with metal ions

  14. Alkali metal complexes of the Dipeptides PheAla and AlaPhe : IRMPD spectroscopy

    NARCIS (Netherlands)

    Polfer, N. C.; Oomens, J.; Dunbar, R. C.

    2008-01-01

    Complexes of PheAla and AlaPhe with alkali metal ions Na+ and K+ are generated by electroscopy ionization, isolated in the Fourier-transform ion cyclotron resonance (FT-ICR) ion trapping mass spectrometer, and investigated by infrared multiple-photon dissociation (IRMPD) using light from the FELIX

  15. The roles of metal ions in regulation by riboswitches.

    Science.gov (United States)

    Ferré-D'Amaré, Adrian R; Winkler, Wade C

    2011-01-01

    Metal ions are required by all organisms in order to execute an array of essential molecular functions. They play a critical role in many catalytic mechanisms and structural properties. Proper homeostasis of ions is critical; levels that are aberrantly low or high are deleterious to cellular physiology. To maintain stable intracellular pools, metal ion-sensing regulatory (metalloregulatory) proteins couple metal ion concentration fluctuations with expression of genes encoding for cation transport or sequestration. However, these transcriptional-based regulatory strategies are not the only mechanisms by which organisms coordinate metal ions with gene expression. Intriguingly, a few classes of signal-responsive RNA elements have also been discovered to function as metalloregulatory agents. This suggests that RNA-based regulatory strategies can be precisely tuned to intracellular metal ion pools, functionally akin to metal-loregulatory proteins. In addition to these metal-sensing regulatory RNAs, there is a yet broader role for metal ions in directly assisting the structural integrity of other signal-responsive regulatory RNA elements. In this chapter, we discuss how the intimate physicochemical relationship between metal ions and nucleic acids is important for the structure and function of metal ion- and metabolite-sensing regulatory RNAs.

  16. Synthesis and characterization of templated ion exchange resins for the selective complexation of actinide ions. 1998 annual progress report

    International Nuclear Information System (INIS)

    Murray, G.M.; Uy, O.M.

    1998-01-01

    'The purpose of this research is to develop polymeric extractants for the selective complexation of uranyl ions (and subsequently other actinyl and actinide ions) from aqueous solutions (lakes, streams, waste tanks and body fluids). Selectivity for a specific actinide ion is obtained by providing polymers with cavities lined with complexing ligands so arranged as to match the charge, coordination number, coordination geometry, and size of the actinide metal ion. These cavity-containing polymers will be produced using a specific actinide ion (or surrogate) as a template around which monomeric complexing ligands will be polymerized. The polymers will provide useful sequestering agents for removing actinide ions from wastes and will form the basis for a variety of analytical techniques for actinide determinations.'

  17. Metal complexes and solvent extraction properties of isonitrosoacetophenone 2-aminobenzoylhydrazone.

    Science.gov (United States)

    Gup, Ramazan; Giziroğlu, Emrah

    2006-11-01

    Three types of copper complexes as well as an oximate-bridged nickel complex with isonitrosoacetophenone 2-aminobenzoylhydrazone (H(2)L) have been prepared in ethanolic solution and characterized by elemental analyses, IR, (1)H NMR, UV-vis and magnetic susceptibility measurement. IR spectra show the ligand coordinates as a neutral, monoanionic and dianionic O,N,N-tridentate acylhydrazoneoxime ligand depending reaction conditions and metal salts employed. The elemental analyses results, spectroscopic and magnetic data are consistent with the formation of mononuclear copper complexes and binuclear complexes with both copper and nickel. The effects of varying pH and solvent on the absorption behavior of both ligand and complexes have been investigated. The extraction ability of acylhydrazoneoxime ligand has been examined by the liquid-liquid extraction of selected transition metal [Cu(2+), Ni(2+), Co(2+), Cr(3+), Hg(2+), Zn(2+), Cd(2+) and Mn(2+)] cations. The ligand shows strong binding ability toward copper(II) ion.

  18. Studies On Some Acid Divalent-Metal Nitrilotriacetate Complexes

    Directory of Open Access Journals (Sweden)

    N. E. Milad

    2000-10-01

    Full Text Available IR and 1H-NMR studies on nitrilotriacetic acid (H3NTA suggest that the acid exists in the zwitterion form, which allows the existence of intermolecular hydrogen bonding. A tetrahedral structure is established for eleven (1:1 anhydrous acid-metal (II nitrilotriacetates complexes. The ten Dq values for the colored complexes were determined spectrophotometrically. The pKa values for the eleven acid metal complexes [M(HNTA].(OH23] were determined and compared with the corresponding pKa values of the [M(OH2n]+2 ions and also with the log β1 values of the corresponding [M(NTA]- complexes. X-ray diffraction studies on the ligand and on eight of these complexes are described.

  19. Complexes of natural carbohydrates with metal cations

    International Nuclear Information System (INIS)

    Alekseev, Yurii E; Garnovskii, Alexander D; Zhdanov, Yu A

    1998-01-01

    Data on the interaction of natural carbohydrates (mono-, oligo-, and poly-saccharides, amino sugars, and natural organic acids of carbohydrate origin) with metal cations are surveyed and described systematically. The structural diversity of carbohydrate metal complexes, caused by some specific features of carbohydrates as ligands, is demonstrated. The influence of complex formation on the chemical properties of carbohydrates is discussed. It is shown that the formation of metal complexes plays an important role in the configurational and conformational analysis of carbohydrates. The practical significance of the coordination interaction in the series of carbohydrate ligands is demonstrated. The bibliography includes 571 references.

  20. Degradation of metal-nitrilotriacetate complexes by Chelatobacter heintzii

    Energy Technology Data Exchange (ETDEWEB)

    Bolton, H. Jr.; Girvin, D.C.; Plymale, A.E.; Harvey, S.D.; Workman, D.J. [Pacific Northwest Lab., Richland, WA (United States)

    1996-03-01

    Nitrilotriacetic acid (NTA) is a synthetic chelating agent that can form strong water-soluble complexes with a wide range of radionuclide and metal ions and has been used to decontaminate nuclear reactors and in the processing of nuclear materials. The codisposal of NTA or other synthetic chelating agents with radionuclides may result in increased dispersal of radionuclides in soil and subsurface environments. Understanding the influence of aqueous geochemistry on NTA degradation is essential to predict the mobility and fate of inorganic contaminant-NTA complexes in the subsurface. Chelatobacter heintzii (ATCC 29600) was shown to degrade {sup 14}C-labeled NTA to {sup 14}CO{sub 2} with first-order kinetics at concentrations ranging from 0.05 to 5.23 {mu}M (0.01-1 {mu}g of NTA mL{sup -1}). The degradation of various metal-NTA complexes was investigated under conditions in which NTA was predominantly present as the metal-NTA complex, and the order for the rates of degradation is given. The degradability of the various metal-NTA complexes was not related to their thermodynamic stability constants, but was related to the lability of the various metal-NTA complexes or the relative rates of formation of HNTA{sup 2-}. 58 refs., 5 figs., 2 tabs.

  1. Heavy metal ion uptake properties of polystyrene-supported ...

    Indian Academy of Sciences (India)

    Unknown

    concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich's equation. The resins are recyclable and ...

  2. Blood metal ion concentrations in metal-on-metal total hip arthroplasty.

    Science.gov (United States)

    Ohtsuru, Tadahiko; Morita, Yuji; Murata, Yasuaki; Shimamoto, Shuji; Munakata, Yutaro; Kato, Yoshiharu

    2017-05-01

    The hip placement with a metal-on-metal (MOM) bearing has been used for both surface replacement and total hip arthroplasty (THA). Use of MOM bearing for hip replacement reduces the wear compared to conventional bearings. We prospectively assessed 30 patients who underwent unilateral MOM THA. A control group of 30 patients who underwent metal-on-polyethylene THA using the implants as the other group, except for bearing, were accessed. Blood samples were collected preoperatively and at 3- , 6- , 9- , 12- , 15- , 18- , and 24-month intervals. Changes in mean blood metal ion concentration were compared between the MOM and metal-on-polyethylene groups. A statistically significant positive correlation was observed between blood cobalt and chromium concentrations in all of the patients. The mean blood ion concentrations of the MOM were significantly higher than those of the metal-on-polyethylene. A statistically significant negative correlation was found between maximum blood cobalt concentration and cup version angle. The maximum blood chromium concentrations in the patients who had larger cup version angles were more likely to decrease. We considered that cup version angle is one of the factors that have the greatest effect on blood metal ion concentration, and the target cup version angle that did not induce an increase in blood metal ion concentrations was approximately 20°.

  3. Sorption of metal ions on synthetic organo-inorganic ion exchanger polyacrylonitrile-Ti(IV) tungstophosphate

    International Nuclear Information System (INIS)

    Haidary, A.; Ahmadi, S. J.; Asadi, M. R.; Asgharizadeh, F.; Ashtari, P.

    2010-01-01

    In this study two Polyacrylonitrile-Ti(IV) tungstophosphate organo-inorganic ion exchangers with different molar ratios have been synthesized. These ion exchangers have been characterized by fourier transform-IR, X- ray diffraction, thermal gravimetric, scanning electron microscopy and CHNSO techniques and their cation exchange capacity bas been measured by continuous method. Distribution coefficients (K d ) for metal ions and radionuclides were determined by batch method and with these ion exchangers, separation of metal ions was achieved on a glass column.

  4. Plasma immersion ion implantation for reducing metal ion release

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, C.; Garcia, J. A.; Maendl, S.; Pereiro, R.; Fernandez, B.; Rodriguez, R. J. [Centro de Ingenieria Avanzada de Superficies AIN, 31191, Cordovilla-Pamplona (Spain); Leibniz-Institut fuer Oberflaechenmodifizierung, 04318 Leipzig (Germany); Universidad de Oviedo, Departamento Quimica Fisica y Analitica (Spain); Centro de Ingenieria Avanzada de Superficies AIN, 31191, Cordovilla-Pamplona (Spain)

    2012-11-06

    Plasma immersion ion implantation of Nitrogen and Oxygen on CoCrMo alloys was carried out to improve the tribological and corrosion behaviors of these biomedical alloys. In order to optimize the implantation results we were carried experiments at different temperatures. Tribocorrosion tests in bovine serum were used to measure Co, Cr and Mo releasing by using Inductively Coupled Plasma Mass Spectrometry analysis after tests. Also, X-ray Diffraction analysis were employed in order to explain any obtained difference in wear rate and corrosion tests. Wear tests reveals important decreases in rate of more than one order of magnitude for the best treatment. Moreover decreases in metal release were found for all the implanted samples, preserving the same corrosion resistance of the unimplanted samples. Finally this paper gathers an analysis, in terms of implantation parameters and achieved properties for industrial implementation of these treatments.

  5. The role of metal complexes in nuclear reactor decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Prince, A.A.M.; Raghavan, P.S.; Gopalan, R. [Madras Christian College, Tambaram, Chennai (India); Velmurugan, S.; Narasimhan, S.V. [Bhabha Atomic Research Center (BARC) (IN). Water and Steam Chemistry Lab. (WSCL)

    2006-07-15

    Chemical decontamination is the process of removal of radioactivity from corrosion products formed on structural materials in the nuclear reactors. These corrosion products cause problems for the operation and maintenance of the plants. Removal of the radioactive contaminants can be achieved by dissolving the oxide from the system surface using organic complexing agents in low concentrations known as dilute chemical decontamination (DCD) formulations. These organic complexing agents attack the oxide surface and form metal complexes, which further accelerate the dissolution process. The stability of the complexes plays an important role in dissolving the radioactive contaminated oxides. In addition, the DCD process is operated through ion exchange resins for the removal of the dissolved metal ions and radioactive nuclides. In the present study, the kinetics of dissolution of various model corrosion products such as magnetite (Fe{sub 3}O{sub 4}), hematite ({alpha}-Fe{sub 2}O{sub 3}) and maghemite ({gamma}-Fe{sub 2}O{sub 3}) have been studied in the presence of complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), hydroxyethylethylenediaminepentaacetic acid (HEEDTA), and 2,6 pyridinedicarboxylic acid (PDCA). The reductive roles of metal complexes and organic reducing agents are discussed. (orig.)

  6. Backscattering of light ions from metal surfaces

    International Nuclear Information System (INIS)

    Verbeek, H.

    1975-07-01

    When a metal target is bombarded with light ions some are implanted and some are reflected from the surface or backscattered from deeper layers. This results in an energy distribution of the backscattered particles which reaches from zero to almost the primary energy. The number of the backscattered particles and their energy, angular, and charge distributions depends largely on the energy and the ion target combination. For high energies (i.e., greater than50 keV for protons) particles are backscattered in a single collision governed by the Rutherford cross section. Protons and He-ions with energies of 100 keV to several MeV are widely used for thin film analysis. For lower energies multiple collisions and the screening of the Coulomb potential have to be taken into account, which makes the theoretical treatment more difficult. This energy region is, however, of special interest in the field of nuclear fusion research. Some recent results for energies below 20 keV are discussed in some detail. (auth)

  7. Nanodiamonds act as Trojan horse for intracellular delivery of metal ions to trigger cytotoxicity.

    Science.gov (United States)

    Zhu, Ying; Zhang, Yu; Shi, Guosheng; Yang, Jinrong; Zhang, Jichao; Li, Wenxin; Li, Aiguo; Tai, Renzhong; Fang, Haiping; Fan, Chunhai; Huang, Qing

    2015-02-05

    Nanomaterials hold great promise for applications in the delivery of various molecules with poor cell penetration, yet its potential for delivery of metal ions is rarely considered. Particularly, there is limited insight about the cytotoxicity triggered by nanoparticle-ion interactions. Oxidative stress is one of the major toxicological mechanisms for nanomaterials, and we propose that it may also contribute to nanoparticle-ion complexes induced cytotoxicity. To explore the potential of nanodiamonds (NDs) as vehicles for metal ion delivery, we used a broad range of experimental techniques that aimed at getting a comprehensive assessment of cell responses after exposure of NDs, metal ions, or ND-ion mixture: 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, Trypan blue exclusion text, optical microscope observation, synchrotron-based scanning transmission X-ray microscopy (STXM) and micro X-ray fluorescence (μXRF) microscopy, inductively coupled plasma-mass spectrometry (ICP-MS), reactive oxygen species (ROS) assay and transmission electron microscopy (TEM) observation. In addition, theoretical calculation and molecular dynamics (MD) computation were used to illustrate the adsorption properties of different metal ion on NDs as well as release profile of ion from ND-ion complexes at different pH values. The adsorption capacity of NDs for different metal ions was different, and the adsorption for Cu2+ was the most strong among divalent metal ions. These different ND-ion complexes then had different cytotoxicity by influencing the subsequent cellular responses. Detailed investigation of ND-Cu2+ interaction showed that the amount of released Cu2+ from ND-Cu2+ complexes at acidic lysosomal conditions was much higher than that at neutral conditions, leading to the elevation of intracellular ROS level, which triggered cytotoxicity. By theoretical approaches, we demonstrated that the functional carbon surface and cluster structures of NDs made them

  8. Metallophore mapping in complex matrices by metal isotope coded profiling of organic ligands.

    Science.gov (United States)

    Deicke, Michael; Mohr, Jan Frieder; Bellenger, Jean-Philippe; Wichard, Thomas

    2014-12-07

    Metal isotope coded profiling (MICP) introduces a universal discovery platform for metal chelating natural products that act as metallophores, ion buffers or sequestering agents. The detection of cation and oxoanion complexing ligands is facilitated by the identification of unique isotopic signatures created by the application of isotopically pure metals.

  9. Integrated Microanalytical System for Simultaneous Voltammetric Measurements of Free Metal Ion Concentrations in Natural Waters

    OpenAIRE

    Noël, Stéphane; Tercier-Waeber, Mary-Lou; Lin, Lin; Buffle, Jacques; Guenat, Olivier; Koudelka-Hep, Milena

    2007-01-01

    A complexing gel integrated microelectrode (CGIME) for direct measurements of free metal ion concentrations in natural waters has been developed. It is prepared by the successive deposition of microlayers of a chelating resin, an antifouling agarose gel and Hg on a 100-interconnected Ir-based microelectrode array. The trace metals of interest are in a first step accumulated on the chelating resin in proportion to their free ion concentration in solution, then released in acidic solution and d...

  10. A biosystem for removal of metal ions from water

    Energy Technology Data Exchange (ETDEWEB)

    Kilbane, J.J. II.

    1990-01-01

    The presence of heavy metal ions in ground and surface waters constitutes a potential health risk and is an environmental concern. Moreover, processes for the recovery of valuable metal ions are of interest. Bioaccumulation or biosorption is not only a factor in assessing the environmental risk posed by metal ions; it can also be used as a means of decontamination. A biological system for the removal and recovery of metal ions from contaminated water is reported here. Exopolysaccharide-producing microorganisms, including a methanotrophic culture, are demonstrated to have superior metal binding ability, compared with other microbial cultures. This paper describes a biosorption process in which dried biomass obtained from exopolysaccharide-producing microorganisms is encapsulated in porous plastic beads and is used for metal ion binding and recovery. 22 refs., 13 figs.

  11. The introduction to the chemistry of second-sphere complexes of metals in solutions

    International Nuclear Information System (INIS)

    Mironov, V.E.; Isaev, I.D.

    1986-01-01

    Investigation data on the chemistry of second-sphere complexes of metal ions (alkali, alkaline earth, transition, rare earth and other metals) in solutions are generalized. Modern representations about the processes of their formation, investigation methods, thermodynamics, structure, the nature of forces to form them are described. Perspectives of the development of the chemistry of second-sphere complexes in solutions are given

  12. Reactivity of olefin and allyl ligands in π-complexes of metals

    International Nuclear Information System (INIS)

    Kukushkin, Yu.N.

    1987-01-01

    The data on reactivity of olefin and allyl ligands in transition metal (Ru, W) π-complexes, published up to 1984 are presented. Metal ion coordination of olefins causes their appreciable reactivity change. Transformations of π-olefin ligands into σ-alkyl ones, interaction of π-complexes with oxygen nucleophilic reagents, amines, halogenides and pseudohalogenides are considered

  13. Metal ion effects on enolase activity

    International Nuclear Information System (INIS)

    Lee, M.E.; Nowak, T.

    1986-01-01

    Most metal binding studies with yeast enolase suggest that two metals per monomer are required for catalytic activity. The functions of metal I and metal II have not been unequivocally defined. In a series of kinetic experiments where the concentration of MgII is kept constant at subsaturating levels (1mM), the addition of MnII or of ZnII gives a hyperbolic decrease in activity. The final velocity of these mixed metal systems is the same velocity obtained with either only MnII or ZnII respectively. The concentration of MnII (40 μM) or of Zn (2μM) which gives half maximal effect in the presence of (1mM) MgII is approximately the same as the Km' value for MnII (9μM) or ZnII (3μM) respectively. Direct binding of MnII to enolase in the absence and presence of MgII shows that MnII and MgII compete for the same metal site on enolase. In the presence of 2-phosphoglycerate (2-PGA) and MgII, only a single site is occupied by MnII. Results suggest MnII at site I and MgII at site II. PRR and high resolution 1 H and 31 P NMR studies of enzyme-ligand complexes containing MnII and MgII and MnII are consistent with this model. 31 P measurements allow a measure of the equilibrium constant (0.36) for enolase. Saturation transfer measurements yield net rate constants (k/sub f/ = 0.49s -1 ; k/sub r/ = 1.3s -1 ) for the overall reaction. These values are smaller than k/sub cat/ (38s -1 ) measured under analogous conditions. The cation at site I appears to determine catalytic activity

  14. Coordination ability determined transition metal ions substitution of Tb in Tb-Asp fluorescent nanocrystals and a facile ions-detection approach.

    Science.gov (United States)

    Duan, Jiazhi; Ma, Baojin; Liu, Feng; Zhang, Shan; Wang, Shicai; Kong, Ying; Du, Min; Han, Lin; Wang, Jianjun; Sang, Yuanhua; Liu, Hong

    2018-04-11

    Although the synthesis and fluorescent properties of lanthanide-amino acid complex nanostructures have been investigated extensively, limited studies have been reported on metal ions' substitution ability for the lanthanide ions in the complex and their effect on the fluorescent property. In this study, taking biocompatible Tb-aspartic acid (Tb-Asp) complex nanocrystals as a model, the substitution mechanism of metal ions, particularly transition metals, for Tb ions in Tb-Asp nanocrystals and the change in the fluorescent property of the Tb-Asp nanocrystals after substitution were systematically investigated. The experimental results illustrated that metal ions with higher electronegativity, higher valence, and smaller radius possess stronger ability for Tb ions' substitution in Tb-Asp nanocrystals. Based on the effect of substituting ions' concentration on the fluorescent property of Tb-Asp, a facile method for copper ions detection with high sensitivity was proposed by measuring the fluorescent intensity of Tb-Asp nanocrystals' suspensions containing different concentrations of copper ions. The good biocompatibility, great convenience of synthesis and sensitive detection ability make Tb-Asp nanocrystals a very low cost and effective material for metal ions detection, which also opens a new door for practical applications of metal-Asp coordinated nanocrystals.

  15. Potentiometric, spectrometric, thermal and conductimetric studies on some 3-phenyl-4-(arylazo)-5-pyrazolones and their complexes with divalent cobalt metal ion

    Science.gov (United States)

    Hassib, H. B.; Abdel-Latif, S. A.

    2003-09-01

    3-phenyl-4-arylazo-5-pyrazolones (I-IV) have been synthesized and characterized by elemental, infrared (IR), ultraviolet and visible spectra (UV-Vis), proton nuclear magnetic resonance ( 1H NMR) and Mass spectra. It has been proved that these compounds exhibit a keto-enol tautomerism in solution. The donor character of the substituent increases the enol form. The ionization constants of the investigated ligands have been determined potentiometrically and found to decrease in the order OCH 3(IV)>CH 3(III)>H(I)>Cl(II). The Co(II) complexes of the investigated 3-phenyl-4-arylazo-5-pyrazolones (I-IV) have been prepared and characterized by elemental and thermal analyses as well as by IR, UV-Vis, electronic transition, potentiometric, conductimetric and magnetic measurements. The data suggest octahedral geometry for Co(II) (1:1) complexes and tetrahedral for Co(II) (2:3) complexes.

  16. Recent Advances in Antimicrobial Hydrogels Containing Metal Ions and Metals/Metal Oxide Nanoparticles

    Directory of Open Access Journals (Sweden)

    Fazli Wahid

    2017-11-01

    Full Text Available Recently, the rapid emergence of antibiotic-resistant pathogens has caused a serious health problem. Scientists respond to the threat by developing new antimicrobial materials to prevent or control infections caused by these pathogens. Polymer-based nanocomposite hydrogels are versatile materials as an alternative to conventional antimicrobial agents. Cross-linking of polymeric materials by metal ions or the combination of polymeric hydrogels with nanoparticles (metals and metal oxide is a simple and effective approach for obtaining a multicomponent system with diverse functionalities. Several metals and metal oxides such as silver (Ag, gold (Au, zinc oxide (ZnO, copper oxide (CuO, titanium dioxide (TiO2 and magnesium oxide (MgO have been loaded into hydrogels for antimicrobial applications. The incorporation of metals and metal oxide nanoparticles into hydrogels not only enhances the antimicrobial activity of hydrogels, but also improve their mechanical characteristics. Herein, we summarize recent advances in hydrogels containing metal ions, metals and metal oxide nanoparticles with potential antimicrobial properties.

  17. Structural analysis of inter-genus complexes of V-antigen and its regulator and their stabilization by divalent metal ions.

    Science.gov (United States)

    Basu, Abhishek; Das, Atanu; Mondal, Abhisek; Datta, Saumen

    2016-03-01

    Gram-negative bacteria like Yersinia, Pseudomonas, and Aeromonas need type III secretion system (T3SS) for their pathogenicity. V-antigen and its regulator are essential for functioning of T3SS. There is significant functional conservation amongst V-antigen and its regulator belonging to the Ysc family. In this study, we have structurally characterized the inter-genus complexes of V-antigen and its regulator. ConSurf analysis demonstrates that V-antigens belonging to the Ysc family show high structural identity predominantly confined to the two long helical regions. The regulator of V-antigen shows high conservation in its first intramolecular coiled-coil domain, responsible for interaction with V-antigen. ∆LcrG(1-70) localizes within the groove formed by long helices of LcrV, as observed in PcrV-∆PcrG(13-72) interaction. Inter-genus complexes of LcrV-PcrG and PcrV-LcrG exhibited elongated conformation and 1:1 heterodimeric state like the native complex of PcrV-PcrG and LcrV-LcrG. Both native and inter-genus complexes showed rigid tertiary structure, solvent-exposed hydrophobic patches, and cooperative melting behavior with high melting temperature. LcrV-PcrG and PcrV-LcrG showed nanomolar affinity of interaction, identical to PcrV-PcrG interaction, but stronger than LcrV-LcrG interaction. Calcium (a secretion blocker of T3SS) propels all the complexes towards a highly monodisperse form. Calcium and magnesium increase the helicity of the native and inter-genus complexes, and causes helix-helix stabilization. Stabilization of helices leads to a slight increase in the melting temperature by 1.5-2.0 °C. However, calcium does not alter the affinity of interaction of V-antigen and its regulator, emphasizing the effect of divalent of cations at the structural level without any regulatory implications. Therefore, the structural conservation of these inter-genus complexes could be the basis for their functional complementation.

  18. New Catalytic DNA Biosensors for Radionuclides and Metal ions

    International Nuclear Information System (INIS)

    Lu, Yi

    2003-01-01

    The goals of the project are to develop new catalytic DNA biosensors for simultaneous detection and quantification of bioavailable radionuclides and metal ions, and apply the sensors for on-site, real-time assessment of concentration, speciation and stability of the individual contaminants during and after bioremediation. A negative selection strategy was tested and validated. In vitro selection was shown to yield highly active and specific transition metal ion-dependent catalytic DNA/RNA. A fluorescence resonance energy transfer (FRET) study of in vitro selected DNA demonstrated that the trifluorophore labeled system is a simple and powerful tool in studying complex biomolecules structure and dynamics, and is capable of revealing new sophisticated structural changes. New fluorophore/quenchers in a single fluorosensor yielded improved signal to noise ratio in detection, identification and quantification of metal contaminants. Catalytic DNA fluorescent and colorimetric sensors were shown useful in sensing lead in lake water and in leaded paint. Project results were described in two papers and two patents, and won an international prize

  19. Metal ion binding with dehydroannulenes – Plausible two ...

    Indian Academy of Sciences (India)

    WINTEC

    Abstract. Theoretical investigations have been carried out at B3LYP/6-311++G** level of theory to study the binding interaction of various metal ions, Li+, Na+ and K+ with dehydroannulene systems. The present study reveals that alkali metal ions bind strongly to dehydroannulenes and the passage through the central.

  20. Chromatography Of Metal Ions On Wood Cellulose Impregnated ...

    African Journals Online (AJOL)

    Adsorption chromatography of some heavy metal ions on wood cellulose of saw dust (wood waste dust) modified with hydrochloric acid, urea and thiourea was studied. Atomic absorption spectrophotometry (AAS) was used to determine the initial concentration of solutions of Zn2+, Cu2+, Ni2+, Pb2+, and Fe3+ metal ions.

  1. In vitro cytotoxicity of metallic ions released from dental alloys

    NARCIS (Netherlands)

    Milheiro, A.; Nozaki, K.; Kleverlaan, C.J.; Muris, J.; Miura, H.; Feilzer, A.J.

    2016-01-01

    The cytotoxicity of a dental alloy depends on, but is not limited to, the extent of its corrosion behavior. Individual ions may have effects on cell viability that are different from metals interacting within the alloy structure. We aimed to investigate the cytotoxicity of individual metal ions in

  2. Fluorescence signalling of the transition metal ions: Design strategy ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Transition metal ions are notorious for their fluorescence quenching abilities. In this paper, we discuss the design strategies for the development of efficient off-on fluorescence signalling systems for the transition metal ions. It is shown that even simple fluorophore-spacer-receptor systems can display excellent.

  3. Cesium ion bombardment of metal surfaces

    International Nuclear Information System (INIS)

    Tompa, G.S.

    1986-01-01

    The steady state cesium coverage due to cesium ion bombardment of molybdenum and tungsten was studied for the incident energy range below 500 eV. When a sample is exposed to a positive ion beam, the work function decreases until steady state is reached with a total dose of less than ≅10 16 ions/cm 2 , for both tungsten and molybdenum. A steady state minimum work function surface is produced at an incident energy of ≅100 eV for molybdenum and at an incident energy of ≅45 eV for tungsten. Increasing the incident energy results in an increase in the work function corresponding to a decrease in the surface coverage of cesium. At incident energies less than that giving the minimum work function, the work function approaches that of cesium metal. At a given bombarding energy the cesium coverage of tungsten is uniformly less than that of molybdenum. Effects of hydrogen gas coadsorption were also examined. Hydrogen coadsorption does not have a large effect on the steady state work functions. The largest shifts in the work function due to the coadsorption of hydrogen occur on the samples when there is no cesium present. A theory describing the steady-state coverage was developed is used to make predictions for other materials. A simple sticking and sputtering relationship, not including implantation, cannot account for the steady state coverage. At low concentrations, cesium coverage of a target is proportional to the ratio of (1 - β)/γ where β is the reflection coefficient and γ is the sputter yield. High coverages are produced on molybdenum due to implantation and low backscattering, because molybdenum is lighter than cesium. For tungsten the high backscattering and low implantation result in low coverages

  4. Coprecipitation of alkali metal ions with calcium carbonate

    International Nuclear Information System (INIS)

    Okumura, Minoru; Kitano, Yasushi

    1986-01-01

    The coprecipitation of alkali metal ions Li + , Na + , K + and Rb + with calcium carbonate has been studied experimentally and the following results have been obtained: (1) Alkali metal ions are more easily coprecipitated with aragonite than with calcite. (2) The relationship between the amounts of alkali metal ions coprecipitated with aragonite and their ionic radii shows a parabolic curve with a peak located at Na + which has approximately the same ionic radius as Ca 2+ . (3) However, the amounts of alkali metal ions coprecipitated with calcite decrease with increasing ionic radius of alkali metals. (4) Our results support the hypothesis that (a) alkali metals are in interstitial positions in the crystal structure of calcite and do not substitute for Ca 2+ in the lattice, but (b) in aragonite, alkali metals substitute for Ca 2+ in the crystal structure. (5) Magnesium ions in the parent solution increase the amounts of alkali metal ions (Li + , Na + , K + and Rb + ) coprecipitated with calcite but decrease those with aragonite. (6) Sodium-bearing aragonite decreases the incorporation of other alkali metal ions (Li + , K + and Rb + ) into the aragonite. (author)

  5. Photochemical Stability and Photostabilizing Efficiency of Poly(methyl methacrylate Based on 2-(6-Methoxynaphthalen-2-ylpropanoate Metal Ion Complexes

    Directory of Open Access Journals (Sweden)

    Emad Yousif

    2015-06-01

    Full Text Available The photostabilization of poly(methyl methacrylate (PMMA films having 2-(6-methoxynaphthalen-2-ylpropanoate and Sn(II, Ni(II, Zn(II and Cu(II complexes was investigated. The production of PMMA films containing such complexes (0.5% by weight was carried out by the casting method using chloroform. The photostabilization activities of the compounds were determined by monitoring the hydroxyl index with irradiation time. The quantum yield of the chain scission (Φcs for the complexes in PMMA films and the changes in the viscosity average molecular weight of PMMA with irradiation time were evaluated. The rate of photostabilization for PMMA in the presence of the additives was found to follow the order NiL2 > CuL2 > ZnL2 > SnL2 (L, ligand. Depending on the structure of the additive, such as a peroxide decomposer, UV absorption or a radical scavenger for the photostabilizer, several mechanisms are suggested.

  6. Which metal or ion? Identification of metals and ions in protein structures

    Czech Academy of Sciences Publication Activity Database

    Dohnálek, Jan

    2014-01-01

    Roč. 70, Supplement /August/ (2014), C1484 ISSN 0108-7673. [Congress and General Assembly of the International Union of Crystallography /23./ - IUCr 2014. 05.08.2014-12.08.2014, Montreal] R&D Projects: GA MŠk(CZ) EE2.3.30.0029; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:61389013 Keywords : metal s * ions * structure validation Subject RIV: CE - Biochemistry

  7. Neutralizing mutations of carboxylates that bind metal 2 in T5 flap endonuclease result in an enzyme that still requires two metal ions.

    Science.gov (United States)

    Tomlinson, Christopher G; Syson, Karl; Sengerová, Blanka; Atack, John M; Sayers, Jon R; Swanson, Linda; Tainer, John A; Williams, Nicholas H; Grasby, Jane A

    2011-09-02

    Flap endonucleases (FENs) are divalent metal ion-dependent phosphodiesterases. Metallonucleases are often assigned a "two-metal ion mechanism" where both metals contact the scissile phosphate diester. The spacing of the two metal ions observed in T5FEN structures appears to preclude this mechanism. However, the overall reaction catalyzed by wild type (WT) T5FEN requires three Mg(2+) ions, implying that a third ion is needed during catalysis, and so a two-metal ion mechanism remains possible. To investigate the positions of the ions required for chemistry, a mutant T5FEN was studied where metal 2 (M2) ligands are altered to eliminate this binding site. In contrast to WT T5FEN, the overall reaction catalyzed by D201I/D204S required two ions, but over the concentration range of Mg(2+) tested, maximal rate data were fitted to a single binding isotherm. Calcium ions do not support FEN catalysis and inhibit the reactions supported by viable metal cofactors. To establish participation of ions in stabilization of enzyme-substrate complexes, dissociation constants of WT and D201I/D204S-substrate complexes were studied as a function of [Ca(2+)]. At pH 9.3 (maximal rate conditions), Ca(2+) substantially stabilized both complexes. Inhibition of viable cofactor supported reactions of WT, and D201I/D204S T5FENs was biphasic with respect to Ca(2+) and ultimately dependent on 1/[Ca(2+)](2). By varying the concentration of viable metal cofactor, Ca(2+) ions were shown to inhibit competitively displacing two catalytic ions. Combined analyses imply that M2 is not involved in chemical catalysis but plays a role in substrate binding, and thus a two-metal ion mechanism is plausible.

  8. Neutralizing Mutations of Carboxylates That Bind Metal 2 in T5 Flap Endonuclease Result in an Enzyme That Still Requires Two Metal Ions*

    Science.gov (United States)

    Tomlinson, Christopher G.; Syson, Karl; Sengerová, Blanka; Atack, John M.; Sayers, Jon R.; Swanson, Linda; Tainer, John A.; Williams, Nicholas H.; Grasby, Jane A.

    2011-01-01

    Flap endonucleases (FENs) are divalent metal ion-dependent phosphodiesterases. Metallonucleases are often assigned a “two-metal ion mechanism” where both metals contact the scissile phosphate diester. The spacing of the two metal ions observed in T5FEN structures appears to preclude this mechanism. However, the overall reaction catalyzed by wild type (WT) T5FEN requires three Mg2+ ions, implying that a third ion is needed during catalysis, and so a two-metal ion mechanism remains possible. To investigate the positions of the ions required for chemistry, a mutant T5FEN was studied where metal 2 (M2) ligands are altered to eliminate this binding site. In contrast to WT T5FEN, the overall reaction catalyzed by D201I/D204S required two ions, but over the concentration range of Mg2+ tested, maximal rate data were fitted to a single binding isotherm. Calcium ions do not support FEN catalysis and inhibit the reactions supported by viable metal cofactors. To establish participation of ions in stabilization of enzyme-substrate complexes, dissociation constants of WT and D201I/D204S-substrate complexes were studied as a function of [Ca2+]. At pH 9.3 (maximal rate conditions), Ca2+ substantially stabilized both complexes. Inhibition of viable cofactor supported reactions of WT, and D201I/D204S T5FENs was biphasic with respect to Ca2+ and ultimately dependent on 1/[Ca2+]2. By varying the concentration of viable metal cofactor, Ca2+ ions were shown to inhibit competitively displacing two catalytic ions. Combined analyses imply that M2 is not involved in chemical catalysis but plays a role in substrate binding, and thus a two-metal ion mechanism is plausible. PMID:21734257

  9. Facile Synthesis of ZnS/N,S Co-doped Carbon Composite from Zinc Metal Complex for High-Performance Sodium-Ion Batteries.

    Science.gov (United States)

    Jing, Mingjun; Chen, Zhengu; Li, Zhi; Li, Fangyi; Chen, Mengjie; Zhou, Minjie; He, Binhong; Chen, Liang; Hou, Zhaohui; Chen, Xiaobo

    2018-01-10

    ZnS coated on N,S co-doped carbon (ZnS/NSC) composite has been prepared utilizing zinc pyrithione (C 10 H 8 N 2 O 2 S 2 Zn) as raw material via calcination. Through activation using Na 2 CO 3 salt, ZnS nanoparticles encapsulated in NSC (denoted as A-ZnS/NSC) with mixed-crystal structure has also been obtained, which reveals much larger specific surface area and more bridges between ZnS and NSC. Based on the existence of bridges (C-S-Zn and S-O-Zn bonds) and the modification of carbon from N,S co-doping, the A-ZnS/NSC composite as an anode for sodium-ion batteries (SIBs) displays significantly enhanced electrochemical performances with a high reversible specific capacity of 516.6 mA h g -1 (at 100 mA g -1 ), outstanding cycling stability (96.9% capacity retention after 100 cycles at 100 mA g -1 ), and high rate behavior (364.9 mA h g -1 even at 800 mA g -1 ).

  10. Metal ion transport in eukaryotic microorganisms: insights from Saccharomyces cerevisiae.

    Science.gov (United States)

    Eide, D J

    2000-01-01

    Metal ions such as iron, copper, manganese, and zinc are essential nutrients for all eukaryotic microorganisms. Therefore, these organisms possess efficient uptake mechanisms to obtain these nutrients from their extracellular environment. Metal ions must also be transported into intracellular organelles where they function as catalytic and structural cofactors for compartmentalized enzymes. Thus, intracellular transport mechanisms are also present. When present in high levels, metal ions can also be toxic, so their uptake and intracellular transport is tightly regulated at both transcriptional and post-transcriptional levels to limit metal ion overaccumulation and facilitate storage and sequestration. Remarkable molecular insight into these processes has come from recent studies of the yeast Saccharomyces cerevisiae. This organism, which is the primary subject of this chapter, serves as a useful paradigm to understand metal ion metabolism in other eukaryotic microbes.

  11. A 13C and 1H NMR spectroscopic investigation of the structure of the iminium ion with a dipolar form in metal complexes of 2-N-substituted N-confused porphyrins.

    Science.gov (United States)

    Chang, Wen-Pin; Lin, Wen-Chain; Chen, Jyh-Horung; Wang, Shin-Shin; Tung, Jo-Yu

    2012-11-21

    The crystal structures of chloro(2-aza-2-ethoxycarbonylmethyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′N′′) zinc(II) [Zn(2-NCH2COOC2H5NCTPP)Cl; 4], (2-aza-2-ethoxycarbonylmethyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′N′′) palladium(II) [Pd(2-NCH2COOC2H5NCTPP); 5], bromo(2-aza-2-ethoxycarbonylmethyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′N′′) manganese(III) [Mn(2-NCH2COOC2H5NCTPP)Br; 6], [2-aza-(3′-phenoxypropyl)-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′N′′] nickel(II) [Ni(2-NCH2CH2CH2OC6H5NCTPP); 7] and chloro(2-aza-2-methoxycarbonylmethyl-5,10,15,20-tetraphenyl-21-carbaporphyrinato-N,N′N′′) zinc(II) [Zn(2-NCH2COOCH3NCTPP)Cl; 8] have been established. The g value of 9.54, which was measured from the parallel polarization of the X-band EPR spectra in CHCl3 at 4 K, is consistent with the high spin mononuclear manganese(III) centre (S = 2) in 6. The magnitude of the axial (D) zero-field splitting (ZFS) for the mononuclear Mn(III) centre in 6 was determined approximately to be 1.63 cm(−1) by paramagnetic susceptibility measurements. The NMR spectroscopic investigation of the iminium ion with a dipolar canonical contribution to the metal complexes 5–7, Pd(2-NCH2C6H5NCTPP) (10) and Ni(2-NCH2C6H5NCTPP) (11) in CDCl3 is reported. A resonance between the dipolar canonical form II and covalent canonical form I exists for complexes 5–7, 10 and 11 in CDCl3. To develop the correlations between δ13C [C(3)], δ1H [H(3)] and the canonical form II in 5–7, 10 and 11, this work thoroughly examines the 13C and 1H NMR of N+=CH(Ar) fragment on seven metal complexes of 2-N substituted N-confused porphyrin. According to these results, the 13C [C(3)] and 1H [H(3)] chemical shifts of the N+=CH(Ar) fragment at 20 °C in CDCl3 are separately located at 152.6 ± 0.5 and 8.30 ± 0.15 ppm respectively for the iminium ion. This exists as a dipolar canonical form II for complexes 5–7, 10 and 11, and the N–CH(Ar) group

  12. DNA as sensors and imaging agents for metal ions.

    Science.gov (United States)

    Xiang, Yu; Lu, Yi

    2014-02-17

    Increasing interest in detecting metal ions in many chemical and biomedical fields has created demands for developing sensors and imaging agents for metal ions with high sensitivity and selectivity. This review covers recent progress in DNA-based sensors and imaging agents for metal ions. Through both combinatorial selection and rational design, a number of metal-ion-dependent DNAzymes and metal-ion-binding DNA structures that can selectively recognize specific metal ions have been obtained. By attachment of these DNA molecules with signal reporters such as fluorophores, chromophores, electrochemical tags, and Raman tags, a number of DNA-based sensors for both diamagnetic and paramagnetic metal ions have been developed for fluorescent, colorimetric, electrochemical, and surface Raman detection. These sensors are highly sensitive (with a detection limit down to 11 ppt) and selective (with selectivity up to millions-fold) toward specific metal ions. In addition, through further development to simplify the operation, such as the use of "dipstick tests", portable fluorometers, computer-readable disks, and widely available glucose meters, these sensors have been applied for on-site and real-time environmental monitoring and point-of-care medical diagnostics. The use of these sensors for in situ cellular imaging has also been reported. The generality of the combinatorial selection to obtain DNAzymes for almost any metal ion in any oxidation state and the ease of modification of the DNA with different signal reporters make DNA an emerging and promising class of molecules for metal-ion sensing and imaging in many fields of applications.

  13. A computational study of adsorption of divalent metal ions on graphene oxide

    Directory of Open Access Journals (Sweden)

    Somphob Thompho

    2017-12-01

    Full Text Available Adsorption of divalent metal ions (Pb2+,Cd2+, Zn2+,Cu2+ on graphene oxide (GO was studied using density functional theory (DFT. Adsorption geometries and energies, as well as the nature of the binding energy, were calculated for the interaction of divalent metal ions with oxygen-containing groups on the surface of GO. The configurations of the complexes were modeled by placing the divalent metal ions above the center and perpendicular to the surface. Binding of Cu2+ to the GO sheet was predicted to be much stronger than that for other divalent metal ions. Calculated results show good agreement with experimental observations and provide useful information for environmental pollution cleanup.

  14. Alkali metal ion battery with bimetallic electrode

    Science.gov (United States)

    Boysen, Dane A; Bradwell, David J; Jiang, Kai; Kim, Hojong; Ortiz, Luis A; Sadoway, Donald R; Tomaszowska, Alina A; Wei, Weifeng; Wang, Kangli

    2015-04-07

    Electrochemical cells having molten electrodes having an alkali metal provide receipt and delivery of power by transporting atoms of the alkali metal between electrode environments of disparate chemical potentials through an electrochemical pathway comprising a salt of the alkali metal. The chemical potential of the alkali metal is decreased when combined with one or more non-alkali metals, thus producing a voltage between an electrode comprising the molten the alkali metal and the electrode comprising the combined alkali/non-alkali metals.

  15. Label-free histamine detection with nanofluidic diodes through metal ion displacement mechanism.

    Science.gov (United States)

    Ali, Mubarak; Ramirez, Patricio; Duznovic, Ivana; Nasir, Saima; Mafe, Salvador; Ensinger, Wolfgang

    2017-02-01

    We design and characterize a nanofluidic device for the label-free specific detection of histamine neurotransmitter based on a metal ion displacement mechanism. The sensor consists of an asymmetric polymer nanopore fabricated via ion track-etching technique. The nanopore sensor surface having metal-nitrilotriacetic (NTA-Ni 2+ ) chelates is obtained by covalent coupling of native carboxylic acid groups with N α ,N α -bis(carboxymethyl)-l-lysine (BCML), followed by exposure to Ni 2+ ion solution. The BCML immobilization and subsequent Ni 2+ ion complexation with NTA moieties change the surface charge concentration, which has a significant impact on the current-voltage (I-V) curve after chemical modification of the nanopore. The sensing mechanism is based on the displacement of the metal ion from the NTA-Ni 2+ chelates. When the modified pore is exposed to histamine solution, the Ni 2+ ion in NTA-Ni 2+ chelate recognizes histamine through a metal ion coordination displacement process and formation of stable Ni-histamine complexes, leading to the regeneration of metal-free NTA groups on the pore surface, as shown in the current-voltage characteristics. Nanomolar concentrations of the histamine in the working electrolyte can be detected. On the contrary, other neurotransmitters such as glycine, serotonin, gamma-aminobutyric acid, and dopamine do not provoke significant changes in the nanopore electronic signal due to their inability to displace the metal ion and form a stable complex with Ni 2+ ion. The nanofluidic sensor exhibits high sensitivity, specificity and reusability towards histamine detection and can then be used to monitor the concentration of biological important neurotransmitters. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Towards metals analysis using corona discharge ionization ion mobility spectrometry.

    Science.gov (United States)

    Jafari, Mohammad T; Saraji, Mohammad; Sherafatmand, Hossein

    2016-02-25

    For the first time, the capability of corona discharge ionization ion mobility spectrometry (CD-IMS) in the determination of metal complex was evaluated. The extreme simplicity of dispersive liquid-liquid microextraction (DLLME) coupled to the high sensitivity of CD-IMS measurement could make this combination really useful for simple, rapid, and sensitive determination of metals in different samples. In this regard, mercury, as a model metal, was complexed with diethyldithiocarbamate (DEDTC), and then extracted into the carbon tetrachloride using DLLME. Some parameters affecting the extraction efficiency, including the type and volume of the extraction solvent, the type and volume of the disperser solvent, the concentration of the chelating agent, salt addition and, pH were exhaustively investigated. Under the optimized condition, the enrichment factor was obtained to be 142. The linear range of 0.035-10.0 μg mL(-1) with r(2) = 0.997 and the detection limit of 0.010 μg mL(-1) were obtained. The relative standard deviation values were calculated to be lower than 4% and 8% for intra-day and inter-day, respectively. Finally, the developed method was successfully applied for the extraction and determination of mercury in various real samples. The satisfactory results revealed the capability of the proposed method in trace analysis without tedious derivatization or hydride generation. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Sorption of Molecular Oxygen by Metal-Ion Exchanger Nanocomposites

    Science.gov (United States)

    Krysanov, V. A.; Plotnikova, N. V.; Kravchenko, T. A.

    2018-03-01

    Kinetic features are studied of the chemisorption and reduction of molecular oxygen from water by metal-ion exchanger nanocomposites that differ in the nature of the dispersed metal and state of oxidation. In the Pd equilibrium sorption coefficient for oxygen dissolved in water ranges from 20 to 50, depending on the nature and oxidation state of the metal component.

  18. Characterization of Metal Ion ­ Colloid Interaction: Impact On Colloid-facilitated Transport

    Science.gov (United States)

    Specht, C. H.; Schmitt, D.; Kaulisch, E.-M.; Frimmel, F. H.

    It is generally accepted, that metal transport in natural aquatic systems strongly de- pends on the metal binding form. Besides complex formation with well defined inor- ganic and organic ligands, the interaction with colloidal particles and soil material is one of the most important reactions of metal ions in aquatic systems. Mobile colloids compete with the stationary soil matrix for binding of metal ions and might facili- tate their transport. Important representatives for mineral and organic colloids are clay minerals and natural organic matter (NOM), respectively. In this work, the interaction of metal ions with clay minerals and NOM is characterized by coupling of asymmetric flow field-flow fractionation AF4 to inductively coupled plasma ­ mass spectrometry (ICPMS). A method for separating mineral from organic colloids is presented, which allows to quantify the amount of metals being bound to either colloid. For different metal ions (Cu, Zn, Pb, Pt) and a metalloid (As) a different extent of binding to either colloid was found.The information obtained from the AF4-ICPMS measurements was useful for the understanding of the observations from column experiments which were conducted to quantify the colloid-facilitated metal transport. In column experiments, the transport of the mineral colloids itself and the influence of NOM onto the colloid transport were investigated. Furthermore, the dependance of colloid transport from the ionic strength and the pH value was elucidated. In order to get information about the co-transport of metal ions by organic and mineral colloids, metal ions were adsorbed onto the colloidal material and a distribution coef- ficient of the metal ions between the colloidal phase and the solution was determined. The colloidal suspension containing both, "free" and adsorbed metal ions were then injected onto the column. The direct metal breakthrough caused by colloidal trans- port was detected at the column outlet. The results clearly

  19. Degradation of metal-nitrilotriacetate complexes by nitrilotriacetate monooxygenase

    Energy Technology Data Exchange (ETDEWEB)

    Xun, L.; Reeder, R.B. [Washington State Univ. at Tri-Cities, Richland, WA (United States)]|[Pacific Northwest National Lab., Richland, WA (United States); Plymale, A.E.; Girvin, D.C.; Bolton, H. Jr. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-05-01

    Studies of metal-NTA complex degradation using NTA monooxygenase (NTA-Mo) can provide a mechanistic understanding of NTA degradatioon and lead to approaches to remediate recalcitrant metal-NTA complexes (e.g., NiNTA{sup -}). NTA can exist in aqueous systems as various species depending upon the pH and types and concentrations of ions present (e.g., HNTA{sup 2-}, CaNTA{sup -}, MgNTA{sup -}). An understanding of the aqueous speciation of NTA is necessary to determine the substrate range of NTA complexes degraded by NTA-Mo. The protonated form of NTA (HNTA{sup 2-}) and CaNTA{sup -} were not degraded by NTA-Mo, while MgNTA{sup -}, MnNTA{sup -}, CoNTA{sup -}, FeNTA{sup -}, NiNTA{sup -}, and ZnNTA{sup -} were degraded with similar K{sub m}`s. This is surprising because these metal-NTA complexes have different rates of biodegradation by whole cells. This suggests that biodegradation of various metal-NTA complexes is limited by the rate of transport into the cell and that NTA-Mo may be useful for degrading metal-NTA complexes recalcitrant to degradation by whole cells. In mixed systems containing both substrate (MgNTA{sup -}) and nonsubstrate (CaNTA{sup -}), aqueous speciation modeling was able to provide the substrate concentration, which correlated well with the rate data (r{sup 2} = 0.95). This demonstrates that aqueous speciation modeling can be used to predict the rate of NTA degradation by NTA-Mo for complex systems containing multiple species. 21 refs., 3 tabs.

  20. Metal complexes as antibacterial agents: Synthesis, characterization and antibacterial activity of some 3d metal complexes of sulphadimidine

    Directory of Open Access Journals (Sweden)

    Adedibu Clement Tella

    2010-06-01

    Full Text Available Metal complexes of Sulphadimidine(SAD were synthesized.The complexes were formulated as [Co(SAD2Cl2], [Cu(SAD2 (H2O2], [Ni (SAD2 Cl2 H2O], [Cd (SAD2 Br2], [Fe (SAD3](H­2O­3 and [Mn (SAD2Cl2] characterized by elemental Analysis, conductivity, IR , UV-Vis, Magnet moment and 1H-NMR and Mass spectroscopies. Co(II, Mn (II,  and Ni(II sulphadimidine complexes consist of metal ion which coordinates through amino nitrogen of the terminal NH2 group and oxygen of sulfonamidic group of the two molecules of sulphadimidine ligand and two halide ions to form octahedral structure while Cd(II coordinates with sulphadimidine through amino nitrogen of the terminal NH2 group with two bromine ions to complete tetrahedral structure. In Cu(II sulphadimidine complex, copper ion coordinates through both pyrimidinic nitrogen (heterocyclic nitrogen and sulfonamidic nitrogen of the two molecules of sulphadimidine. Fe(III coordinates to three molecules of sulphadimidine through heterocyclic nitrogen (pyrimidinic nitrogen and sulfonamidic nitrogen,with three molecules of water outside the coordination sphere. Both Fe(III and Cu(II complexes exhibit octahedral geometry. The antibacterial activity of the complexes and the ligands was investigated against Esherichia coli,  Staphylococcus aureus and Klebsiella pneumonia .  The data obtained revealed that the complexes showed greater activity against the three micro-organisms when compared to parent compound. Stability constant of the complexes were evaluated for the metal salts, the order of stability constant b was found to be Cu (II > Fe (III >Ni(II> Co (II > Cd (II.The values of stability constant (b was found to be log 6.31, 5.93, 5.29, 4.63 and 3.92, respectively. The stability constant data revealed that this ligand may be used as antidote or chelating agent for medical treatment of metals overload or poisoning.

  1. Initiation of protein association in tofu formation by metal ions.

    Science.gov (United States)

    Arii, Yasuhiro; Takenaka, Yasuyuki

    2014-01-01

    Magnesium and calcium ions are important factors in making tofu. However, the molecular role of these ions remains unclear in tofu formation. We have previously shown that magnesium chloride concentration-dependent produced silken tofu-like (SP) and regular tofu-like (RP) precipitates, but was an inconsequential factor for the retention of tofu. We investigated in this present study, the effect of various metal chlorides on the metal chloride concentration-dependent changes in tofu formation. These changes occurred in a similar manner to that of the magnesium ion, in which SP formation was followed by RP formation. It is interesting that the midpoint concentration for the formation of SP and RP represented a good correlation with the stability constant of EDTA. This correlation demonstrated the possibility that metal ions would interact with the carboxyl groups of soy proteins. We consider from these results that metal ions were the initiators of protein association in tofu formation.

  2. Validation of ion chromatography for the determination of transition metal ions along with alkali, alkaline earth metal elements for uranium oxide fuel

    International Nuclear Information System (INIS)

    Kelkar, Anoop; Prakash, Amrit; Afzal, Mohd.; Panakkal, J.P.

    2009-02-01

    The present report describes the use of Ion chromatography (IC) methods with spectrophotometric and direct conductivity detection for the determination of transition metal elements and alkali alkaline earth metal ions in UO 2 pellets. Transmet analytical column and Metrosep- cation 1-2 column were used for the separation of transition metal elements and alkali and alkaline earth metal elements respectively. Oxalic acid and mixture of pyridine 2,6-dicarboxylic acid (PDCA), Na 2 SO 4 and NaCl were used as mobile phase for the separation of transition metal ions and monitored after post - column reaction with 4,2-pyridylazo resorcinol (PAR) at 520nm spectrophotometrically. In the determination of alkali and alkaline earth metal ions the interference of transition metals are removed by complexing them with PDCA. Mixture of tartaric acid and PDCA employed in the separation of alkali and alkaline earth metal ions and monitored on direct conductivity detector. Mobile phase composition was optimised for the base line separation. Calibration plots of Fe 3+ , Cu 2+ , Ni 2+ , Co 2+ , Cd 2+ , Mn 2+ , Li + , Na + , K + , Mg 2+ , Ca 2+ and Sr 2+ were linear over a wide dynamic range with regression coefficient better than 0.999. Detection limit of above ions were between 5-30ppb. To prevent the overloading of the cation exchange column, uranium matrix was removed from UO 2 sample by solvent extraction with 30% TBP - TOPO/CCl 4 . Ten sintered UO2 pellets of same lot were analysed and R.S.D. ±10% was obtained. These methods were validated by analysis of ILCE standards of UO 2 . (author)

  3. Novel forward osmosis process to effectively remove heavy metal ions

    KAUST Repository

    Cui, Yue

    2014-10-01

    In this study, a novel forward osmosis (FO) process for the removal of heavy metal ions from wastewater was demonstrated for the first time. The proposed FO process consists of a thin-film composite (TFC) FO membrane made from interfacial polymerization on a macrovoid-free polyimide support and a novel bulky hydroacid complex Na4[Co(C6H4O7)2]·r2H2O (Na-Co-CA) as the draw solute to minimize the reverse solute flux. The removal of six heavy metal solutions, i.e., Na2Cr2O7, Na2HAsO4, Pb(NO3)2, CdCl2, CuSO4, Hg(NO3)2, were successfully demonstrated. Water fluxes around 11L/m2/h (LMH) were harvested with heavy metals rejections of more than 99.5% when employing 1M Na-Co-CA as the draw solution to process 2000ppm(1 ppm=1 mg/L) heavy metal solutions at room temperature. This FO performance outperforms most nanofiltration (NF) processes. In addition, the high rejections were maintained at 99.5% when a more concentrated draw solution (1.5M) or feed solution (5000ppm) was utilized. Furthermore, rejections greater than 99.7% were still achieved with an enhanced water flux of 16.5LMH by operating the FO process at 60°C. The impressive heavy metal rejections and satisfactory water flux under various conditions suggest great potential of the newly developed FO system for the treatment of heavy metal wastewater. © 2014 Elsevier B.V.

  4. Divalent metal complexes of 4-amino-N-pyrimidin-2-ylbenzene ...

    African Journals Online (AJOL)

    In all the complexes the metal ions coordinate through pyrimidinic nitrogen and sulphonamidic nitrogen of the two molecules of APS. The suggested structure for Cd(II) complex of APS is tetrahedral, while that of Cu(II), Mn(II) and Ni(II) APS complexes is octahedral. The inner coordination spheres were occupied by two water ...

  5. Catalysis using hydrous metal oxide ion exchanges

    Science.gov (United States)

    Dosch, Robert G.; Stephens, Howard P.; Stohl, Frances V.

    1985-01-01

    In a process which is catalyzed by a catalyst comprising an active metal on a carrier, said metal being active as a catalyst for the process, an improvement is provided wherein the catalyst is a hydrous, alkali metal or alkaline earth metal titanate, zirconate, niobate or tantalate wherein alkali or alkaline earth metal cations have been exchanged with a catalytically effective amount of cations of said metal.

  6. Synthesis, Characterization and Metal Ion Detection of Novel Fluoroionophores Based on Heterocyclic Substituted Alanines

    Directory of Open Access Journals (Sweden)

    M. Manuela M Raposo

    2007-10-01

    Full Text Available The synthesis of new fluorescent probes containing the thiophene andbenzoxazole moieties combined with an alanine residue is described. The resulting highlyfluorescent heterocyclic alanine derivatives respond via a quenching effect, withparamagnetic Cu(II and Ni(II metal ions and with diamagnetic Hg(II, as shown by theabsorption and steady-state fluorescence spectroscopy studies. The formation ofmononuclear or dinuclear metal complexes was postulated based on the presence of thefree carboxylic acid as binding site and also with the interaction with the donor atoms inthe chromophore. Interaction with other important biological metal ions such as Zn(II,Ca(II and Na(I was also explored.

  7. Metallic ion release from biocompatible cobalt-based alloy

    Directory of Open Access Journals (Sweden)

    Dimić Ivana D.

    2014-01-01

    Full Text Available Metallic biomaterials, which are mainly used for the damaged hard tissue replacements, are materials with high strength, excellent toughness and good wear resistance. The disadvantages of metals as implant materials are their susceptibility to corrosion, the elastic modulus mismatch between metals and human hard tissues, relatively high density and metallic ion release which can cause serious health problems. The aim of this study was to examine metallic ion release from Co-Cr-Mo alloy in artificial saliva. In that purpose, alloy samples were immersed into artificial saliva with different pH values (4.0, 5.5 and 7.5. After a certain immersion period (1, 3 and 6 weeks the concentrations of released ions were determined using Inductively Coupled Plasma - Mass Spectrophotometer (ICP-MS. The research findings were used in order to define the dependence between the concentration of released metallic ions, artificial saliva pH values and immersion time. The determined released metallic ions concentrations were compared with literature data in order to describe and better understand the phenomenon of metallic ion release from the biocompatible cobalt-based alloy. [Projekat Ministarstva nauke Republike Srbije, br. III 46010 i br. ON 174004

  8. Rhodamine spirolactam sensors operated by sulfur-cooperated metal complexation

    Science.gov (United States)

    Heo, Gisuk; Lee, Dahye; Kim, Chi Gwan; Do, Jung Yun

    2018-01-01

    New rhodamine Schiff base sensors were developed to improve selective sensing by introducing sulfide, ester, and dithiocarbonate groups, as well as using ketones coupled to rhodamine-hydrazine. Metal sensing proceeded through the 1:1 complexation of the metal ion for most sensors in the presence of Cu2 + and Hg2 +. A sensor carrying a dithiocarbonate group responded selectively to Hg2 + showing a strong colorimetric change and intense fluorescence. The association constants of the sensors were determined from a linear plot performed at micro-molar concentrations to afford values in the range of 104. Sensing was interrupted at the initial time of Hg2 + exposure due to the isomerization of imine and preferential metal bonding of two dithiocarbonate groups regardless of the main structure of rhodamine. The sensors exhibited the reversible and reproducible performance for Hg2 + sensing.

  9. Progress in metal ion separation and preconcentration : an overview.

    Energy Technology Data Exchange (ETDEWEB)

    Bond, A. H.

    1998-05-19

    A brief historical perspective covering the most mature chemically-based metal ion separation methods is presented, as is a summary of the recommendations made in the 1987 National Research Council (NRC) report entitled ''Separation and Purification: Critical Needs and Opportunities''. A review of Progress in Metal Ion Separation and Preconcentration shows that advances are occurring in each area of need cited by the NRC. Following an explanation of the objectives and general organization of this book, the contents of each chapter are briefly summarized and some future research opportunities in metal ion separations are presented.

  10. Progress in metal ion separation and preconcentration: an overview

    International Nuclear Information System (INIS)

    Bond, A. H.

    1998-01-01

    A brief historical perspective covering the most mature chemically-based metal ion separation methods is presented, as is a summary of the recommendations made in the 1987 National Research Council (NRC) report entitled ''Separation and Purification: Critical Needs and Opportunities''. A review of Progress in Metal Ion Separation and Preconcentration shows that advances are occurring in each area of need cited by the NRC. Following an explanation of the objectives and general organization of this book, the contents of each chapter are briefly summarized and some future research opportunities in metal ion separations are presented

  11. Sugar-metal ion interactions: The coordination behavior of cesium ion with lactose, D-arabinose and L-arabinose

    Science.gov (United States)

    Jiang, Ye; Xue, Junhui; Wen, Xiaodong; Zhai, Yanjun; Yang, Limin; Xu, Yizhuang; Zhao, Guozhong; Kou, Kuan; Liu, Kexin; Chen, Jia'er; Wu, Jinguang

    2016-04-01

    The novel cesium chloride-lactose complex (CsCl·C12H22O10 (Cs-Lac), cesium chloride-D-arabinose and L-arabinose complexes (CsCl·C5H10O5, Cs-D-Ara and Cs-L-Ara) have been synthesized and characterized using X-ray diffraction, FTIR, FIR, THz and Raman spectroscopies. Cs+ is 9-coordinated to two chloride ions and seven hydroxyl groups from five lactose molecules in Cs-Lac. In the structures of CsCl-D-arabinose and CsCl-L-arabinose complexes, two kinds of Cs+ ions coexist in the structures. Cs1 is 10-coordinated with two chloride ions and eight hydroxyl groups from five arabinose molecule; Cs2 is 9-coordinated to three chloride ions and six hydroxyl groups from five arabinose molecules. Two coordination modes of arabinose coexist in the structures. α-D-arabinopyranose and α-L-arabinopyranose appear in the structures of Cs-D-Ara and Cs-L-Ara complexes. FTIR and Raman results indicate variations of hydrogen bonds and the conformation of the ligands after complexation. FIR and THz spectra also confirm the formation of Cs-complexes. Crystal structure, FTIR, FIR, THz and Raman spectra provide detailed information on the structure and coordination of hydroxyl groups to metal ions in the cesium chloride-lactose, cesium chloride-D- and L-arabinose complexes.

  12. Features of proteolytic properties of tetraphenylporphyrin complex with lanthanide group metals

    Science.gov (United States)

    Tobolkina, Elena A.; Skripnikova, Tatiana A.; Starikova, Anna A.; Shumilova, Galina I.; Pendin, Andrey A.

    2018-01-01

    Demetallation of metalloporphyrin molecules is one of the essential degradation reactions in photosynthesis. The effect of metalloporphyrin nature on removal of central metals from tetraphenylporphyrin complexes based on lanthanide group metals (Dy, Er, Lu, Ho) has been studied. pH values, at which the metal ions leave the metalloporphyrin complex were established using two-phase spectrophotometric titration with potentiometric pH-control. The pH values decrease with the increase of atomic numbers of lanthanide groups, as well as with increase of 4f-electrons. The reaction of an extra ligand exchange for the hydroxide ion was studied. For Dy-, Er- and Ho-tetraphenylporphyrin complexes one particle of extra ligand coordinates with one porphyrin complex. A complex with dimeric particles can be formed for the system of Lu-tetraphenylporphyrin. Constants of the ion exchange reactions were calculated.

  13. Metal ion removal from aqueous solution using physic seed hull.

    Science.gov (United States)

    Mohammad, Masita; Maitra, Saikat; Ahmad, Naveed; Bustam, Azmi; Sen, T K; Dutta, Binay K

    2010-07-15

    The potential of physic seed hull (PSH), Jantropha curcas L. as an adsorbent for the removal of Cd(2+) and Zn(2+) metal ions from aqueous solution has been investigated. It has been found that the amount of adsorption for both Cd(2+) and Zn(2+) increased with the increase in initial metal ions concentration, contact time, temperature, adsorbent dosage and the solution pH (in acidic range), but decreased with the increase in the particle size of the adsorbent. The adsorption process for both metal ions on PSH consists of three stages-a rapid initial adsorption followed by a period of slower uptake of metal ions and virtually no uptake at the final stage. The kinetics of metal ions adsorption on PSH followed a pseudo-second-order model. The adsorption equilibrium data were fitted in the three adsorption isotherms-Freundlich, Langmuir and Dubinin-Radushkevich isotherms. The data best fit in the Langmuir isotherm indication monolayer chemisorption of the metal ions. The adsorption capacity of PSH for both Zn(2+) and Cd(2+) was found to be comparable with other available adsorbents. About 36-47% of the adsorbed metal could be leached out of the loaded PSH using 0.1M HCl as the eluting medium. 2010 Elsevier B.V. All rights reserved.

  14. Catalytic metal ions and enzymatic processing of DNA and RNA.

    Science.gov (United States)

    Palermo, Giulia; Cavalli, Andrea; Klein, Michael L; Alfonso-Prieto, Mercedes; Dal Peraro, Matteo; De Vivo, Marco

    2015-02-17

    CONSPECTUS: Two-metal-ion-dependent nucleases cleave the phosphodiester bonds of nucleic acids via the two-metal-ion (2M) mechanism. Several high-resolution X-ray structures portraying the two-metal-aided catalytic site, together with mutagenesis and kinetics studies, have demonstrated a functional role of the ions for catalysis in numerous metallonucleases. Overall, the experimental data confirm the general mechanistic hypothesis for 2M-aided phosphoryl transfer originally reported by Steitz and Steitz ( Proc. Natl. Acad. Sci. U.S.A. 1993 , 90 ( 14 ), 6498 - 6502 ). This seminal paper proposed that one metal ion favors the formation of the nucleophile, while the nearby second metal ion facilitates leaving group departure during RNA hydrolysis. Both metals were suggested to stabilize the enzymatic transition state. Nevertheless, static X-ray structures alone cannot exhaustively unravel how the two ions execute their functional role along the enzymatic reaction during processing of DNA or RNA strands when moving from reactants to products, passing through metastable intermediates and high-energy transition states. In this Account, we discuss the role of multiscale molecular simulations in further disclosing mechanistic insights of 2M-aided catalysis for two prototypical enzymatic targets for drug discovery, namely, ribonuclease H (RNase H) and type II topoisomerase (topoII). In both examples, first-principles molecular simulations, integrated with structural data, emphasize a cooperative motion of the bimetal motif during catalysis. The coordinated motion of both ions is crucial for maintaining a flexible metal-centered structural architecture exquisitely tailored to accommodate the DNA or RNA sugar-phosphate backbone during phosphodiester bond cleavage. Furthermore, our analysis of RNase H and the N-terminal domain (PAN) of influenza polymerase shows that classical molecular dynamics simulations coupled with enhanced sampling techniques have contributed to describe

  15. Interactions between metal cations with H2 in the M - H2 complexes ...

    Indian Academy of Sciences (India)

    Interaction; metal cation–dihydrogen complexes; well depth; binding energy; PECs; energy components; DHDF; CCSD(T); SAPT; NBO. 1. Introduction. Interactions between metal cations and neutral molecu- les play important roles in a variety of contexts including gas storage in solid materials, ion solvation, laser plas-.

  16. Interaction of antihypertensive drug amiloride with metal ions in micellar medium using fluorescence spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Gujar, Varsha; Pundge, Vijaykumar; Ottoor, Divya, E-mail: divya@chem.unipune.ac.in

    2015-05-15

    Steady state and life time fluorescence spectroscopy have been employed to study the interaction of antihypertensive drug amiloride with biologically important metal ions i.e. Cu{sup 2+}, Fe{sup 2+}, Ni{sup 2+} and Zn{sup 2+} in various micellar media (anionic SDS (sodium dodecyl sulfate), nonionic TX-100 (triton X-100) and cationic CTAB (cetyl trimethyl ammonium bromide)). It was observed that fluorescence properties of drug remain unaltered in the absence of micellar media with increasing concentration of metal ions. However, addition of Cu{sup 2+}, Fe{sup 2+} and Ni{sup 2+} caused fluorescence quenching of amiloride in the presence of anionic micelle, SDS. Binding of drug with metal ions at the charged micellar interface could be the possible reason for this pH-dependent metal-mediated fluorescence quenching. There were no remarkable changes observed due to metal ions addition when drug was present in cationic and nonionic micellar medium. The binding constant and bimolecular quenching constant were evaluated and compared for the drug–metal complexes using Stern–Volmer equation and fluorescence lifetime values. - Highlights: • Interaction of amiloride with biologically important metal ions, Fe{sup 2+}, Cu{sup 2+}, Ni{sup 2+} and Zn{sup 2+}. • Monitoring the interaction in various micelle at different pH by fluorescence spectroscopy. • Micelles acts as receptor, amiloride as transducer and metal ions as analyte in the present system. • Interaction study provides pH dependent quenching and binding mechanism of drug with metal ions.

  17. Adaptation of intertidal biofilm communities is driven by metal ion and oxidative stresses

    KAUST Repository

    Zhang, Weipeng

    2013-11-11

    Marine organisms in intertidal zones are subjected to periodical fluctuations and wave activities. To understand how microbes in intertidal biofilms adapt to the stresses, the microbial metagenomes of biofilms from intertidal and subtidal zones were compared. The genes responsible for resistance to metal ion and oxidative stresses were enriched in both 6-day and 12-day intertidal biofilms, including genes associated with secondary metabolism, inorganic ion transport and metabolism, signal transduction and extracellular polymeric substance metabolism. In addition, these genes were more enriched in 12-day than 6-day intertidal biofilms. We hypothesize that a complex signaling network is used for stress tolerance and propose a model illustrating the relationships between these functions and environmental metal ion concentrations and oxidative stresses. These findings show that bacteria use diverse mechanisms to adapt to intertidal zones and indicate that the community structures of intertidal biofilms are modulated by metal ion and oxidative stresses.

  18. Determination of Heavy Metal Ions in Tobacco and Tobacco Additives

    African Journals Online (AJOL)

    NJD

    aminophenyl)-porphyrin, heavy metal ions. 1. Introduction ..... Application. This method was applied to the determination of Co, Ni, Sn,. Hg, Pb and Cd in the glycerol, tobacco leaf, tobacco sauce and cigarette samples. The samples were prepared ...

  19. Synthesis, characterization, anti-microbial, DNA binding and cleavage studies of Schiff base metal complexes

    Directory of Open Access Journals (Sweden)

    Poomalai Jayaseelan

    2016-09-01

    Full Text Available A novel Schiff base ligand has been prepared by the condensation between butanedione monoxime with 3,3′-diaminobenzidine. The ligand and metal complexes have been characterized by elemental analysis, UV, IR, 1H NMR, conductivity measurements, EPR and magnetic studies. The molar conductance studies of Cu(II, Ni(II, Co(II and Mn(II complexes showed non-electrolyte in nature. The ligand acts as dibasic with two N4-tetradentate sites and can coordinate with two metal ions to form binuclear complexes. The spectroscopic data of metal complexes indicated that the metal ions are complexed with azomethine nitrogen and oxyimino nitrogen atoms. The binuclear metal complexes exhibit octahedral arrangements. DNA binding properties of copper(II metal complex have been investigated by electronic absorption spectroscopy. Results suggest that the copper(II complex bind to DNA via an intercalation binding mode. The nucleolytic cleavage activities of the ligand and their complexes were assayed on CT-DNA using gel electrophoresis in the presence and absence of H2O2. The ligand showed increased nuclease activity when administered as copper complex and copper(II complex behave as efficient chemical nucleases with hydrogen peroxide activation. The anti-microbial activities and thermal studies have also been studied. In anti-microbial activity all complexes showed good anti-microbial activity higher than ligand against gram positive, gram negative bacteria and fungi.

  20. Adhesive, abrasive and oxidative wear in ion-implanted metals

    International Nuclear Information System (INIS)

    Dearnaley, G.

    1985-01-01

    Ion implantation is increasingly being used to provide wear resistance in metals and cemented tungsten carbides. Field trials and laboratory tests indicate that the best performance is achieved in mild abrasive wear. This can be understood in terms of the classification of wear modes (adhesive, abrasive, oxidative etc.) introduced by Burwell. Surface hardening and work hardenability are the major properties to be enhanced by ion implantation. The implantation of nitrogen or dual implants of metallic and interstitial species are effective. Recently developed techniques of ion-beam-enhanced deposition of coatings can further improve wear resistance by lessening adhesion and oxidation. In order to support such hard coatings, ion implantation of nitrogen can be used as a preliminary treatment. There is thus emerging a versatile group of related hard vacuum treatments involving intense beams of nitrogen ions for the purpose of tailoring metal surfaces to resist wear. (Auth.)

  1. Complexometric determination: Part I - EDTA and complex formation with the Cu2+ ion

    Directory of Open Access Journals (Sweden)

    Rajković Miloš B.

    2002-01-01

    Full Text Available Compounds forming very stable complexes - chelates, have a wide field of application in analytical chemistry. The most famous group of these compounds are complexons. Complexons represent organic polyaminocarbonic acids as for example ethylenediaminetetraacetic acid (EDTA and its salts. The EDTA molecule has six coordinative sites. It is a hexadentate ligands i.e. it has two binding nitrogen atoms and four oxygen atoms from carboxyl groups and it forms complexes with almost all metal ions. EDTA as a tetraprotonic acid, H4Y disociates through four steps, yielding the ions HsY-, H2Y2-, HY3- and Y4-. Which of the EDTA forms will be encountered in a solution, depends on the pH. Due to the poor solubility of EDTA in pure water, as well as in most organic solvents, the disodium salt of EDTA Na2H2Y-2H2O, under the commercial name complexon III, is utilized for analytical determinations. In water, EDTA forms soluble, stabile chelate complexes with all cations, at the molar ratio 1:1, regardless of the charge of the metal ion. In contrast to other equilibria, which are mainly defined by Le Chatellier's principle, equilibria related to metal-EDTA complex formation are also dependent on the influence of the secondary equilibria of EDTA complex formation. Complexing reactions, which are equilibrium reactions, are simultaneously influenced by the following factors: solution pH and the presence of complexing agents which may also form a stabile complex with metal ions. The secondary reaction influence may be viewed and monitored through conditional stability constants. In the first part of the paper, the reaction of the formation of the Cu2+-ion complex with EDTA is analyzed beginning from the main reaction through various influences of secondary reactions on the complex Cu2+-EDTA: pH effect, complexation effect and hydrolysis effect. The equations are given for conditional stability constants, which include equilibrium reactions under actual conditions.

  2. A versatile MOF-based trap for heavy metal ion capture and dispersion

    OpenAIRE

    Peng, Yaguang; Huang, Hongliang; Zhang, Yuxi; Kang, Chufan; Chen, Shuangming; Song, Li; Liu, Dahuan; Zhong, Chongli

    2018-01-01

    Current technologies for removing heavy metal ions are typically metal ion specific. Herein we report the development of a broad-spectrum heavy metal ion trap by incorporation of ethylenediaminetetraacetic acid into a robust metal-organic framework. The capture experiments for a total of 22 heavy metal ions, covering hard, soft, and borderline Lewis metal ions, show that the trap is very effective, with removal efficiencies of >99% for single-component adsorption, multi-component adsorption, ...

  3. Liquid metal field-emission ion sources and their applications

    International Nuclear Information System (INIS)

    Prewett, P.D.; Jefferies, D.K.

    1980-01-01

    The study of ion emission from liquid metal surfaces under the action of high electric fields has led to the development of ion sources of exceptionally high brightness. The design and operating characteristics of commercially manufactured sources of gallium and gold ions are described. Preliminary focusing and scanning experiments have produced spots estimated to be approximately 0.5 μm diameter at currents approximately 0.2 nA using an electrostatic ion optical system. A focused Ga + beam has been used as an ion microprobe for imaging and for elemental mapping of surfaces by SIMS. (author)

  4. [Detection of metal ions in hair after metal-metal hip arthroplasty].

    Science.gov (United States)

    Hernandez-Vaquero, D; Rodríguez de la Flor, M; Fernandez-Carreira, J M; Sariego-Muñiz, C

    2014-01-01

    There is an increase in the levels of metals in the serum and urine after the implantation of some models of metal-metal hip prosthesis. It has recently been demonstrated that there is an association between these levels and the levels found in hair. The aim of this study is to determine the presence of metals in hair, and to find out whether these change over time or with the removal of the implant. The levels of chromium, cobalt and molybdenum were determined in the hair of 45 patients at 3, 4, 5, and 6 years after a hip surface replacement. The mean age was 57.5 years, and two were female. Further surgery was required to remove the replacement and implant a new model with metal-polyethylene friction in 11 patients, 5 of them due to metallosis and a periarticular cyst. The mean levels of metals in hair were chromium 163.27 ppm, cobalt 61.98 ppm, and molybdenum 31.36 ppm, much higher than the levels found in the general population. A decrease in the levels of chromium (43.8%), molybdenum (51.1%), and cobalt (91.1%) was observed at one year in the patients who had further surgery to remove the prosthesis. High concentrations of metals in the hair are observed in hip replacements with metal-metal friction, which decrease when that implant is removed. The determination of metal ions in hair could be a good marker of the metal poisoning that occurs in these arthroplasty models. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.

  5. Effect of surface modification of microfiltration membrane on capture of toxic heavy metal ions.

    Science.gov (United States)

    Madaeni, Sayed Siavash; Heidary, Farhad

    2012-01-01

    A novel complexing membrane containing 8-hydroxyquinoline groups was used for the removal of heavy metal ions (Cd2+ and Ni2+) from aqueous solution. The functionalized membranes were characterized by FTIR-ATR, SEM and EDAX for the presence of functional groups, the physical structure of the membranes and the analysis of the particles deposited on the membrane, respectively. The influence of 8-hydroxyquinoline concentration, feed concentration, pH and temperature of the solution on capture capability was studied. The modified membrane showed a higher affinity to Cd2+ cations than to Ni2+. The metal ion rejection was increased with an increase in concentration of 8-hydroxyquinoline from 0.5 to 2.0 wt%. However at a ligand concentration higher than 2.0 wt%, no significant change was observed in the metal rejection. The experimental results revealed that the metal rejection was decreased with an increase in metal ion concentration in the feed. Moreover the rejection depended on feed pH and is higher for elevated pH. By changing the temperature in the range of 23-28 degrees C, no considerable effect on metal rejection was observed. However, a higher temperature resulted in a decline in metal rejection. For filtration of a mixture of the two metal ions, the retention was similar to that of the single cations, i.e. Cd > Ni but with smaller absolute rejections.

  6. Laccase Immobilization by Chelated Metal Ion Coordination Chemistry

    Directory of Open Access Journals (Sweden)

    Qingqing Wang

    2014-09-01

    Full Text Available In this work, amidoxime polyacrylonitrile (AOPAN nanofibrous membrane was prepared by a reaction between PAN nanofibers and hydroxylamine hydrochloride. The AOPAN nanofibrous membranes were used for four metal ions (Fe3+, Cu2+, Ni2+, Cd2+ chelation under different conditions. Further, the competition of different metal ions coordinating with AOPAN nanofibrous membrane was also studied. The AOPAN chelated with individual metal ion (Fe3+, Cu2+, Ni2+, Cd2+ and also the four mixed metal ions were further used for laccase (Lac immobilization. Compared with free laccase, the immobilized laccase showed better resistance to pH and temperature changes as well as improved storage stability. Among the four individual metal ion chelated membranes, the stability of the immobilized enzymes generally followed the order as Fe–AOPAN–Lac > Cu–AOPAN–Lac > Ni–AOPAN–Lac > Cd–AOPAN–Lac. In addition, the immobilized enzyme on the carrier of AOPAN chelated with four mixed metal ions showed the best properties.

  7. Enhancement of metal bioleaching from contaminated sediment using silver ion.

    Science.gov (United States)

    Chen, Shen-Yi; Lin, Jih-Gaw

    2009-01-30

    A silver-catalyzed bioleaching process was used to remove heavy metals from contaminated sediment in this study. The effects of silver concentration added on the performance of bioleaching process were investigated. High pH reduction rate was observed in the bioleaching process with silver ion. The silver ion added in the bioleaching process was incorporated into the lattice of the initial sulfide through a cationic interchange reaction. This resulted in the short lag phase and high metal solubilization in the bioleaching process. The maximum pH reduction rate and the ideal metal solubilization were obtained in the presence of 30 mg/L of silver ion. When the added silver ion was greater than 30 mg/L, the rates of pH reduction and metal solubilization gradually decreased. The solubilization efficiencies of heavy metals (Cu, Zn, Mn, Ni and Cr) were relatively high in the silver-enhanced bioleaching process, except Pb. No apparent effect of silver ion on the growth of sulfur-oxidizing bacteria was found in the bioleaching. These results indicate that the kinetics of metal solubilization can be enhanced by the addition of silver ion.

  8. On the capacity to the complexing of alkaline earth metal and magnesium chromates

    International Nuclear Information System (INIS)

    Orekhov, O.L.

    1978-01-01

    Considered is the capacity to the complexing of magnesium chromates and alkaline earth metal chromates with ammonium chromates in aqueous solutions. It has been established that the complexing of alkaline earth metal and magnesium chromates is effected by a nature of initial salts as well as their solubilities and the presence of crystallization water. Capacity of magnesium ions and alkaline rare earth metals to the complexing decreases in a series of Mg-Ca-Sr-Ba. Ca complexes exceed magnesium derivatives in respect of stability

  9. Fixation of metallic sulfosalicylate complexes on an anionic exchange resin

    International Nuclear Information System (INIS)

    Cahuzac, S.

    1969-06-01

    Since sulfosalicylate ions have acid-base properties, sulfosalicylate complexes have an apparent stability which varies with the ph. As a result, the fixation of sulfo-salicylates on an anionic exchange resin depends on the ph of the solution in equilibrium with the resin. This research has been aimed at studying the influence of the ph on the fixation on an anionic exchange resin (Dowex 1 x 4) of sulfosalicylate anions on the one hand, and of metallic sulfosalicylate complexes on the other hand. In the first part of this work, a determination has been made, by frontal analysis of the distribution of sulfosalicylate ions in the resin according to the total sulfosalicylate I concentration in the aqueous solution in equilibrium with the resin. The exchange constants of these ions between the resin and the solution have been calculated. In the second part, a study has been made of the fixation of anionic sulfosalicylate complexes of Fe(III), Al(III), Cr(III), Cu(II), Ni(II), Co(II), Zn(II), Mn(II), Cd(II), Fe(II) and UO 2 2+ . By measuring the partition coefficients of these different elements between the resin and the solution it has been possible to give interpretation for the modes of fixation of the metallic ions, and to calculate their exchange constant between the resin and the solution. The relationship has been established for each metallic element studied, between its partition coefficient, the ph and the total concentration of the complexing agent in solution. Such a relationship makes it possible to predict, for given conditions, the nature of the species in solution and in the resin, as well as the partition coefficient of a metallic, element. Finally, in the third part of the work, use has been made of results obtained previously, to carry out some separations (Ni 2+ - Co 2+ ; Ni 2+ - Co 2+ - Cu 2+ ; UO 2 2+ - Fe 3+ ; UO 2 2+ - Cr 3+ ; UO 2 2+ - Cu 2+ ; UO 2 2+ - Ni 2+ ; UO 2 2+ - Co 2+ ; UO 2 2+ - Mn 2+ and UO 2 2+ - Cd 2+ ), as well as the purification

  10. Chemical Speciation of Some metal ions in Groundwaters of Yola ...

    African Journals Online (AJOL)

    Chemical speciation of some metal ions in groundwaters of Yola area using geochemical model were carried out to determine the water quality of the area using the PHREEQC speciation model. The study findings based on model calculations indicated that free Na+, Ca2+, Mg2+ and K+ ions are present and the ...

  11. Electrical properties of polymer modified by metal ion implantation

    International Nuclear Information System (INIS)

    Wu Yuguang; Zhang Tonghe; Zhang Huixing; Zhang Xiaoji; Deng Zhiwei; Zhou Gu

    2000-01-01

    Polyethylene terephthalate (PET) has been modified by Ag, Cr, Cu and Si ion implantation with a dose range from 1x10 16 to 2x10 17 ions cm -2 using a metal vapor vacuum arc (MEVVA) source. The electrical properties of PET have been changed after metal ion implantation. The resistivity of implanted PET decreased obviously with an increase of ion dose. When metal ion dose of 2x10 17 cm -2 was selected, the resistivity of PET could be less than 10 Ω cm, but when Si ions are implanted, the resistivity of PET would be up to several hundred Ω cm. The results show that the conductive behavior of a metal ion implanted sample is obviously different from Si implantation one. The changes of the structure and composition have been observed with transmission electron microscope (TEM) and X-ray diffraction (XRD). The surface structure is varying after ion implantation and it is believed that the change would cause the improvement of the conductive properties. The mechanism of electrical conduction will be discussed

  12. Effect of ion beam irradiation on metal particle doped polymer ...

    Indian Academy of Sciences (India)

    that the surface roughness increases after ion beam irradiation. Keywords. Composite materials; ion beam irradiation; dielectric properties; X-ray diffraction. 1. Introduction. Various metal fillers were incorporated in polymers to pro- duce novel functionalized composites, which have found extensive applications, such as ...

  13. The kinetics and thermodynamics of adsorption of heavy metal ions ...

    African Journals Online (AJOL)

    Titanium-Pillared and Un-Pillared bentonite clays were studied in order to evaluate the thermodynamics and kinetics of heavy metal ion removal from aqueous solutions. The results showed that the maximum sorption of Cu, Cd, Hg and Pb ions occurred within 30 minutes. A pseudo-second order kinetic model was used to ...

  14. Sorption of toxic metal ions in aqueous environment using ...

    African Journals Online (AJOL)

    2012-03-08

    Mar 8, 2012 ... efficient sorbents for divalent heavy metal ions in aqueous environments as their efficiencies exceeded those of chitosan microspheres, ion-imprinted composites, ..... field strength of 1.67 kV/cm. Under these optimised condi- ..... extraction on modified multiwalled carbon nanotubes. Cent. Eur. J. Chem.

  15. Quantum ion-acoustic wave oscillations in metallic nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Afshin, E-mail: a.moradi@kut.ac.ir [Department of Engineering Physics, Kermanshah University of Technology, Kermanshah, Iran and Department of Nano Sciences, Institute for Studies in Theoretical Physics and Mathematics (IPM), Tehran (Iran, Islamic Republic of)

    2015-05-15

    The low-frequency electrostatic waves in metallic nanowires are studied using the quantum hydrodynamic model, in which the electron and ion components of the system are regarded as a two-species quantum plasma system. The Poisson equation as well as appropriate quantum boundary conditions give the analytical expressions of dispersion relations of the surface and bulk quantum ion-acoustic wave oscillations.

  16. Two-photon-induced reduction of metal ions for fabricating three-dimensional electrically conductive metallic microstructure

    Science.gov (United States)

    Tanaka, Takuo; Ishikawa, Atsushi; Kawata, Satoshi

    2006-02-01

    We developed techniques for fabricating three-dimensional metallic microstructures using two-photon-induced metal-ion reduction. In this process, ions in a metal-ion aqueous solution were directly reduced by a tightly focused femtosecond pulsed laser to fabricate arbitrary three-dimensional structures. A self-standing metallic microstructure with high electrical conductivity was demonstrated.

  17. 18-Electron rule inspired Zintl-like ions composed of all transition metals.

    Science.gov (United States)

    Zhou, Jian; Giri, Santanab; Jena, Purusottam

    2014-10-07

    Zintl phase compounds constitute a unique class of compounds composed of metal cations and covalently bonded multiply charged cluster anions. Potential applications of these materials in solution chemistry and thermoelectric materials have given rise to renewed interest in the search for new Zintl ions. Up to now these ions have been mostly composed of group 13, 14, and 15 post-transition metal elements and no Zintl ions composed of all transition metal elements are known. Using gradient corrected density functional theory we show that the 18-electron rule can be applied to design a new class of Zintl-like ions composed of all transition metal atoms. We demonstrate this possibility by using Ti@Au12(2-) and Ni@Au6(2-) di-anions as examples of Zintl-like ions. Predictive capability of our approach is demonstrated by showing that FeH6(4-) in an already synthesized complex metal hydride, Mg2FeH6, is a Zintl-like ion, satisfying the 18-electron rule. We also show that novel Zintl phase compounds can be formed by using all transition metal Zintl-like ions as building blocks. For example, a two-dimensional periodic structure of Na2[Ti@Au12] is semiconducting and nonmagnetic while a one-dimensional periodic structure of Mg[Ti@Au12] is metallic and ferromagnetic. Our results open the door to the design and synthesis of a new class of Zintl-like ions and compounds with potential for applications.

  18. Competition of dipositive metal ions for Fe (III) binding sites in chelation therapy of Iron Load

    International Nuclear Information System (INIS)

    Rehmani, Fouzia S.

    2005-01-01

    Iron overload is a condition in which excessive iron deposited in the liver, kidney and spleen of human beings in the patients of beta thalassemia and sickle cell anemia. Instead of its importance iron could be toxic when in excess, it damages the tissues. For the treatment of iron overload, a drug desferrioxamine mesylate has been used. It is linear trihydroxamic acid, a natural siderophore produced by streptomyces which removes the extra iron from body. Salicylhydroxamate type siderphore. In present research salicylhydroxamate was used for the complexation with dipositive metal ions which are available in biological environments such as Mn (II), Co (II), Ni (II) and Cu (II). The aim of our work was to study the competition reactions between Fe (III) and other dipositive ions; to calculate the thermodynamic data of chelation of these metal ions complexes with hydroxamate by computer program and comparison with hydroxamate complexes. (author)

  19. Adsorption of heavy metal ions on molybdenum and molybdenum trioxide from dilute aqueous solution

    International Nuclear Information System (INIS)

    Utsunomiya, Taizo; Hoshino, Yoshio; Sakabe, Ken-ichi

    1984-01-01

    The adsorption of heavy metal ions such as Co(II), Cu(II) and Pb(II) on molybdenum powder has been investigated by the batch technique as a function of soaking time, concentration of heavy metal ions and coexisting salts, pH etc. Molybdenum trioxide was also used as an adsorbent for a comparison to discuss the adsorption mechanism. The amount of these heavy metal ions adsorbed was highly pH and coexisting salts dependent. These adsorbents have features of selective adsorption for Pb(II) and large adsorption rate. The adsorption of heavy metal ions on these adsorbents proceeds independently or concurrently by following complex mechanism; (1) cation exchange reaction by hydroxyl radical on the surface of Mo and MoO 3 is predominant for most of heavy metal ions except Pb(II) [Co(II), Mn(II), Fe(III), Ni(II), Zn(II), Cd(II) and Sr(II)], (2) reduction (electron exchange reaction) to low ionic or metallic state after cation exchange reaction [Cu(II) and Ag(I) on Mo] and (3) formation of a compound [Pb(II) on both Mo and MoO 3 ]. (author)

  20. Selective removal of heavy metal ions by disulfide linked polymer networks.

    Science.gov (United States)

    Ko, Dongah; Lee, Joo Sung; Patel, Hasmukh A; Jakobsen, Mogens H; Hwang, Yuhoon; Yavuz, Cafer T; Hansen, Hans Chr Bruun; Andersen, Henrik R

    2017-06-15

    Heavy metal contaminated surface water is one of the oldest pollution problems, which is critical to ecosystems and human health. We devised disulfide linked polymer networks and employed as a sorbent for removing heavy metal ions from contaminated water. Although the polymer network material has a moderate surface area, it demonstrated cadmium removal efficiency equivalent to highly porous activated carbon while it showed 16 times faster sorption kinetics compared to activated carbon, owing to the high affinity of cadmium towards disulfide and thiol functionality in the polymer network. The metal sorption mechanism on polymer network was studied by sorption kinetics, effect of pH, and metal complexation. We observed that the metal ions-copper, cadmium, and zinc showed high binding affinity in polymer network, even in the presence of competing cations like calcium in water. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Biosensor and chemical sensor probes for calcium and other metal ions

    Science.gov (United States)

    Vo-Dinh, Tuan; Viallet, Pierre

    1996-01-01

    The present invention relates to chemical sensor and biosensor probes for measuring low concentration of metals and metal ions in complex samples such as biological fluids, living cells, and environmental samples. More particularly the present invention relates to a gel-based Indo-1 and Fura-2 chemical sensor probes for the measurement of low concentrations of calcium, cadmium, magnesium and the like. Also disclosed is a detector device using the sensors of the present invention.

  2. DETERMINATION OF METAL IONS RELEASED BY STAINLESS ...

    African Journals Online (AJOL)

    The amounts of cobalt, iron, manganese, nickel and chromium ions released from new and reused stainless steel arch bar used for maxillomandibular fixation was determined in Hank's solutions of different hydrogen and chloride ions concentrations, whole blood serum and phosphate buffered saline (PBS) in vitro, over a ...

  3. Comprehensive and Reproducible Phosphopeptide Enrichment Using Iron Immobilized Metal Ion Affinity Chromatography (Fe-IMAC) Columns

    NARCIS (Netherlands)

    Ruprecht, Benjamin; Koch, Heiner; Medard, Guillaume; Mundt, Max; Kuster, Bernhard; Lemeer, Simone

    Advances in phosphopeptide enrichment methods enable the identification of thousands of phosphopeptides from complex samples. Current offline enrichment approaches using TiO2, Ti, and Fe immobilized metal ion affinity chromatography (IMAC) material in batch or microtip format are widely used, but

  4. A novel metal ion source for preparing hard coatings

    International Nuclear Information System (INIS)

    Feng, Y.C.; Wong, S.P.

    1999-01-01

    A novel metal ion source, Electron Beam Evaporation Metal Ion Source, has been developed for material modifications. This ion source is based on the electron beam evaporation technology. It can provide gaseous, solid or gaseous and solid mixed intense ion beams for preparing a variety of thin films. In this ion source, a focusing electron beam is used to bombard and vaporize the metal or other solid element within same chamber where the metal or solid atoms are ionized and plasma medium from which ions are extracted is formed by arc discharge. A small aperture diameter extraction system is used for extracting the ion beam from this source. Ion beams of a series of elements, which include C, W, Ta, Mo, Cr, Ti, B, Cu, Ni, Al, Ar, N, C+N, Ti+N, Cr+N, etc., have been extracted. The source has a 3.6 cm extraction diameter. The beam energy ranges from 0.3 to 4 keV for single charge state ions, and the maximum beam current extractable is over 90 mA. The source has been used for preparing hard coatings. The films of carbon nitride and titanium nitride have been synthesized by direct deposition with C+N and Ti+N mixed ion beams. The results have shown to exhibit very high hardness value for carbon nitride films. The microhardness is up to HK 5800 kgf/mm 2 . In comparison with other methods, it is also to exhibit higher hardness value for titanium nitride coating. The highest hardness value obtained for titanium nitride is about 3000 kgf/mm 2 . The AES profile shows that there is a good intermixture between coating and substrate for both films. The principle, structure and performance of this ion source will be described. The preliminary results for forming hard coatings are also presented in this article

  5. Dansyl-naphthalimide dyads as molecular probes: effect of spacer group on metal ion binding properties.

    Science.gov (United States)

    Shankar, Balaraman H; Ramaiah, Danaboyina

    2011-11-17

    Interaction of a few dansyl-naphthalimide conjugates 1a-e linked through polymethylene spacer groups with various metal ions was investigated through absorption, fluorescence, NMR, isothermal calorimetric (ITC), and laser flash photolysis techniques. The characteristic feature of these dyads is that they exhibit competing singlet-singlet energy transfer (SSET) and photoinduced electron transfer (PET) processes, both of which decrease with the increase in spacer length. Depending on the spacer group, these dyads interact selectively with divalent Cu(2+) and Zn(2+) ions, as compared to other mono- and divalent metal ions. Jobs plot analysis showed that these dyads form 2:3 complexes with Cu(2+) ions, while 1:1 complexes were observed with Zn(2+) ions. The association constants for the Zn(2+) and Cu(2+) complexes were determined and are found to be in the order 10(3)-10(5) M(-1). Irrespective of the length of the spacer group, these dyads interestingly act as fluorescence ratiometric molecular probes for Cu(2+) ions by altering the emission intensity of both dansyl and naphthalimide chromophores. In contrast, only the fluorescence intensity of the naphthalimide chromophore of the lower homologues (n = 1-3) was altered by Zn(2+) ions. (1)H NMR and ITC measurements confirmed the involvement of both sulfonamide and dimethylamine groups in the complexation with Cu(2+) ions, while only the latter group was involved with Zn(2+) ions. Laser excitation of the dyads 1a-e showed formation of a transient absorption which can be attributed to the radical cation of the naphthalimide chromophore, whereas only the triplet excited state of the dyads 1a-e was observed in the presence of Cu(2+) ions. Uniquely, the complexation of 1a-e with Cu(2+) ions affects both PET and SSET processes, while only the PET process was partially inhibited by Zn(2+) ions in the lower homologues (n = 1-3) and the higher homologues exhibited negligible changes in their emission properties. Our results

  6. Accumulation of some metal ions on Bacillus licheniformis

    International Nuclear Information System (INIS)

    Hafez, M.B.; El-Desouky, W.; Fouad, A.

    2001-01-01

    Pure species of Bacillus licheniformis was used to remove ions from aqueous and simulated waste solutions. Metal ion accumulation on B. licheniformis was fast. Maximum uptake occurred at pH 4± 0.5 and at 25 ± 3 deg C. One gram of dry B. licheniformis was found to accumulate 115 mg cerium, 34 mg copper and 11 mg cobalt from aqueous solutions. The presence of certain foreign ions such as calcium, sodium and potassium decreased the uptake of ions by B. licheniformis, while citrate and EDTA prevent the uptake. Electron microscopic investigations showed that cerium (III), copper (II) and cobalt (II) accumulated extracellulary around the surface wall of B. licheniformis cells. A bio-adsorption mechanism between the metal ions and B. licheniformis cell wall was proposed. (author)

  7. Colour interceptions, thermal stability and surface morphology of polyester metal complexes

    International Nuclear Information System (INIS)

    Zohdy, M.H.

    2005-01-01

    Chelating copolymers via grafting of acrylic acid (AAc) and acrylamide (AAm/AAc) comonomer mixture onto polyester micro fiber fabrics (PETMF) using gamma-radiation technique were prepared. The prepared graft chains (PETMF-g-AAc) and (PETMF-g-PAAc/PAAm) acted as chelating sites for some selected transition metal ions. The prepared graft copolymers and their metal complexes were characterized using thermogravimetric analysis (TGA), colour parameters and surface morphology measurements. The colour interception and strength measurements showed that the metal complexation is homogeneously distributed. The results showed that the thermal stability of PETMF was improved after graft copolymerization and metal complexes. Moreover, the degree of grafting enhanced the thermal stability values of the grafted and complexed copolymers up to 25% of magnitude, on the other hand the activation energy of the grafted-copolymer with acrylic acid increased up to 80%. The SEM observation gives further supports to the homogenous distribution of grafting and metal complexation

  8. Metal complex modified azo polymers for multilevel organic memories

    Science.gov (United States)

    Ma, Yong; Chen, Hong-Xia; Zhou, Feng; Li, Hua; Dong, Huilong; Li, You-Yong; Hu, Zhi-Jun; Xu, Qing-Feng; Lu, Jian-Mei

    2015-04-01

    Multilevel organic memories have attracted considerable interest due to their high capacity of data storage. Despite advances, the search for multilevel memory materials still remains a formidable challenge. Herein, we present a rational design and synthesis of a class of polymers containing an azobenzene-pyridine group (PAzo-py) and its derivatives, for multilevel organic memory storage. In this design, a metal complex (M(Phen)Cl2, M = Cu, Pd) is employed to modify the HOMO-LUMO energy levels of azo polymers, thereby converting the memory state from binary to ternary. More importantly, this approach enables modulating the energy levels of azo polymers by varying the coordination metal ions. This makes the achievement of high performance multilevel memories possible. The ability to tune the bandgap energy of azo polymers provides new exciting opportunities to develop new materials for high-density data storage.Multilevel organic memories have attracted considerable interest due to their high capacity of data storage. Despite advances, the search for multilevel memory materials still remains a formidable challenge. Herein, we present a rational design and synthesis of a class of polymers containing an azobenzene-pyridine group (PAzo-py) and its derivatives, for multilevel organic memory storage. In this design, a metal complex (M(Phen)Cl2, M = Cu, Pd) is employed to modify the HOMO-LUMO energy levels of azo polymers, thereby converting the memory state from binary to ternary. More importantly, this approach enables modulating the energy levels of azo polymers by varying the coordination metal ions. This makes the achievement of high performance multilevel memories possible. The ability to tune the bandgap energy of azo polymers provides new exciting opportunities to develop new materials for high-density data storage. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00871a

  9. Stability constants of the Europium complexes with the chloride ions

    International Nuclear Information System (INIS)

    Jimenez R, M.; Solache R, M.; Rojas H, A.

    2000-01-01

    The stability constants of lanthanides complexes with chloride ions which were determined at the same ionic force but in different media, are significantly different. It does not exist a systematic study over these stability constants. The purpose of this work is to determine the stability constants of the europium complexes with chloride ions at 303 K, by the solvents extraction method. (Author)

  10. Determination of the total concentration and speciation of metal ions in river, estuarine and seawater samples.

    Science.gov (United States)

    Alberti, Giancarla; Biesuz, Raffaela; Pesavento, Maria

    2008-12-01

    Different natural water samples were investigated to determine the total concentration and the distribution of species for Cu(II), Pb(II), Al(III) and U(VI). The proposed method, named resin titration (RT), was developed in our laboratory to investigate the distribution of species for metal ions in complex matrices. It is a competition method, in which a complexing resin competes with natural ligands present in the sample to combine with the metal ions. In the present paper, river, estuarine and seawater samples, collected during a cruise in Adriatic Sea, were investigated. For each sample, two RTs were performed, using different complexing resins: the iminodiacetic Chelex 100 and the carboxylic Amberlite CG50. In this way, it was possible to detect different class of ligands. Satisfactory results have been obtained and are commented on critically. They were summarized by principal component analysis (PCA) and the correlations with physicochemical parameters allowed one to follow the evolution of the metals along the considered transect. It should be pointed out that, according to our findings, the ligands responsible for metal ions complexation are not the major components of the water system, since they form considerably weaker complexes.

  11. Spontaneous Phase Transfer-Mediated Selective Removal of Heavy Metal Ions Using Biocompatible Oleic Acid.

    Science.gov (United States)

    Chang, Jeehan; Yoo, Sooyeon; Lee, Wooju; Kim, Dongchoul; Kang, Taewook

    2017-12-01

    Here, we propose an environmentally benign removal technique for heavy metal ions based on selective and spontaneous transfer to oleic acid. The ions can be removed via (1) the selective and rapid complexation with the carboxylic end of oleic acid at an oleic acid/water interface, and (2) the diffusion of such complex into the oleic acid layer. A wide variety of heavy metal ions such as Cu 2+ , Pb 2+ , Zn 2+ , and Ni 2+ can be selectively removed over K + and Na + . For example, the concentration of Cu 2+ is reduced to below 1.3 ppm within 24 h, which corresponds to the level of Cu 2+ permitted by the Environmental Protection Agency. The addition of ethylenediamine ligand to the metal ion solutions is also shown to enhance the phase transfer. The removal efficiency is increased by up to 6 times when compared with that in the absence of the ligand and follows the order, Cu 2+ (99%) > Pb 2+ (96%) > Zn 2+ (95%) > Ni 2+ (65%). Moreover, the removal time can be shortened from 24 h to 1 h. The effect of an emulsion induced by a mechanical agitation on the removal of heavy metal ion is also studied.

  12. The Gellyfish: An In-Situ Equilibrium-Based Sampler for Determining Multiple Free Metal Ion Concentrations in Marine Ecosystems

    Science.gov (United States)

    Dong, Zhao; Lewis, Christopher G.; Burgess, Robert M.; Shine, James P.

    2016-01-01

    Free metal ions are usually the most bioavailable and toxic metal species to aquatic organisms, but they are difficult to measure due to their extremely low concentrations in the marine environment. Many of the current methods for determining free metal ions are complicated, time-consuming, and can only measure one metal at a time. We developed a new version of the ‘Gellyfish’, an in-situ equilibrium-based sampler, with significantly reduced equilibration time and the capability of measuring multiple free metal ions simultaneously. By calibrating the Gellyfish to account for its uptake of cationic metal complexes and validating them in multi-metal competition experiments, we were able to determine free metal ion concentrations previously collected over ten months at five locations in Boston Harbor for Cu, Zn, Pb, Ni, and Cd. This work generated one of the largest free metal ion datasets and demonstrated the applicability of the Gellyfish as an easy-to-use and inexpensive tool for monitoring free ion concentrations of metal mixtures in marine ecosystems. PMID:25598362

  13. Metal ions potentiate microglia responsiveness to endotoxin.

    Science.gov (United States)

    Rachmawati, Dessy; Peferoen, Laura A N; Vogel, Daphne Y S; Alsalem, Inás W A; Amor, Sandra; Bontkes, Hetty J; von Blomberg, B Mary E; Scheper, Rik J; van Hoogstraten, Ingrid M W

    2016-02-15

    Oral metal exposure has been associated with diverse adverse reactions, including neurotoxicity. We showed previously that dentally applied metals activate dendritic cells (MoDC) via TLR4 (Ni, Co, Pd) and TLR3 (Au). It is still unknown whether the low levels of dental metals reaching the brain can trigger local innate cells or prime them to become more responsive. Here we tested whether dentally applied metals (Cr, Fe, Co, Ni, Cu, Zn, Au, Hg) activate primary human microglia in vitro and, as a model, monocytic THP-1-cells, in high non-toxic as well as near-physiological concentrations. In addition the effects of 'near-physiological' metal exposure on endotoxin (LPS) responsiveness of these cells were evaluated. IL-8 and IL-6 production after 24h was used as read out. In high, non-toxic concentrations all transition metals except Cr induced IL-8 and IL-6 production in microglia, with Ni and Co providing the strongest stimulation. When using near-physiological doses (up to 10× the normal plasma concentration), only Zn and Cu induced significant IL-8 production. Of note, the latter metals also markedly potentiated LPS responsiveness of microglia and THP-1 cells. In conclusion, transition metals activate microglia similar to MoDCs. In near-physiological concentrations Zn and Cu are the most effective mediators of innate immune activation. A clear synergism between innate responses to Zn/Cu and LPS was observed, shedding new light on the possible relation between oral metal exposure and neurotoxicity. Copyright © 2015. Published by Elsevier B.V.

  14. Potentiometric and spectroscopic study of the interaction of 3d transition metal ions with inositol hexakisphosphate

    Science.gov (United States)

    Veiga, Nicolás; Macho, Israel; Gómez, Kerman; González, Gabriel; Kremer, Carlos; Torres, Julia

    2015-10-01

    Among myo-inositol phosphates, the most abundant in nature is the myo-inositol hexakisphosphate, InsP6. Although it is known to be vital to cell functioning, the biochemical research into its metabolism needs chemical and structural analysis of all the protonation, complexation and precipitation processes that it undergoes in the biological media. In view of its high negative charge at physiological level, our group has been leading a thorough research into the InsP6 chemical and structural behavior in the presence of the alkali and alkaline earth metal ions essential for life. The aim of this article is to extend these studies, dealing with the chemical and structural features of the InsP6 interaction with biologically relevant 3d transition metal ions (Fe(II), Fe(III), Mn(II), Co(II), Ni(II), Cu(II) and Zn(II)), in a non-interacting medium and under simulated physiological conditions. The metal-complex stability constants were determined by potentiometry, showing under ligand-excess conditions the formation of mononuclear species in different protonation states. Under metal ion excess, polymetallic species were detected for Fe(II), Fe(III), Zn(II) and Cu(II). Additionally, the 31P NMR and UV-vis spectroscopic studies provided interesting structural aspects of the strong metal ion-InsP6 interaction.

  15. Metal ion coupled protein folding and allosteric motions

    Science.gov (United States)

    Wang, Wei

    2014-03-01

    Many proteins need the help of cofactors for their successful folding and functioning. Metal ions, i.e., Zn2+, Ca2+, and Mg2+ etc., are typical biological cofactors. Binding of metal ions can reshape the energy landscapes of proteins, thereby modifying the folding and allosteric motions. For example, such binding may make the intrinsically disordered proteins have funneled energy landscapes, consequently, ensures their spontaneous folding. In addition, the binding may activate certain biological processes by inducing related conformational changes of regulation proteins. However, how the local interactions involving the metal ion binding can induce the global conformational motions of proteins remains elusive. Investigating such question requires multiple models with different details, including quantum mechanics, atomistic models, and coarse grained models. In our recent work, we have been developing such multiscale methods which can reasonably model the metal ion binding induced charge transfer, protonation/deprotonation, and large conformational motions of proteins. With such multiscale model, we elucidated the zinc-binding induced folding mechanism of classical zinc finger and the calcium-binding induced dynamic symmetry breaking in the allosteric motions of calmodulin. In addition, we studied the coupling of folding, calcium binding and allosteric motions of calmodulin domains. In this talk, I will introduce the above progresses on the metal ion coupled protein folding and allosteric motions. We thank the finacial support from NSFC and the 973 project.

  16. Adsorption of heavy metal ions by sawdust of deciduous trees.

    Science.gov (United States)

    Bozić, D; Stanković, V; Gorgievski, M; Bogdanović, G; Kovacević, R

    2009-11-15

    The adsorption of heavy metal ions from synthetic solutions was performed using sawdust of beech, linden and poplar trees. The adsorption depends on the process time, pH of the solution, type of ions, initial concentration of metals and the sawdust concentration in suspension. The kinetics of adsorption was relatively fast, reaching equilibrium for less than 20 min. The adsorption equilibrium follows Langmuir adsorption model. The ion exchange mechanism was confirmed assuming that the alkali-earth metals from the adsorbent are substituted by heavy metal ions and protons. On lowering the initial pH, the adsorption capacity decreased, achieving a zero value at a pH close to unity. The maximum adsorption capacity (7-8 mg g(-1) of sawdust) was achieved at a pH between 3.5 and 5 for all the studied kinds of sawdust. The initial concentration of the adsorbate and the concentration of sawdust strongly affect the process. No influence of particles size was evidenced. A degree of adsorption higher than 80% can be achieved for Cu(2+) ions but it is very low for Fe(2+) ions, not exceeding 10%.

  17. Adsorption of heavy metal ions by sawdust of deciduous trees

    International Nuclear Information System (INIS)

    Bozic, D.; Stankovic, V.; Gorgievski, M.; Bogdanovic, G.; Kovacevic, R.

    2009-01-01

    The adsorption of heavy metal ions from synthetic solutions was performed using sawdust of beech, linden and poplar trees. The adsorption depends on the process time, pH of the solution, type of ions, initial concentration of metals and the sawdust concentration in suspension. The kinetics of adsorption was relatively fast, reaching equilibrium for less than 20 min. The adsorption equilibrium follows Langmuir adsorption model. The ion exchange mechanism was confirmed assuming that the alkali-earth metals from the adsorbent are substituted by heavy metal ions and protons. On lowering the initial pH, the adsorption capacity decreased, achieving a zero value at a pH close to unity. The maximum adsorption capacity (7-8 mg g -1 of sawdust) was achieved at a pH between 3.5 and 5 for all the studied kinds of sawdust. The initial concentration of the adsorbate and the concentration of sawdust strongly affect the process. No influence of particles size was evidenced. A degree of adsorption higher than 80% can be achieved for Cu 2+ ions but it is very low for Fe 2+ ions, not exceeding 10%.

  18. 40 CFR 721.4596 - Diazo substituted carbomonocyclic metal complex.

    Science.gov (United States)

    2010-07-01

    ... metal complex. 721.4596 Section 721.4596 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.4596 Diazo substituted carbomonocyclic metal complex. (a) Chemical... as a diazo substituted carbomonocyclic metal complex (PMN P-94-1039) is subject to reporting under...

  19. 40 CFR 721.10104 - Halophosphate mixed metal complex (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halophosphate mixed metal complex... Specific Chemical Substances § 721.10104 Halophosphate mixed metal complex (generic). (a) Chemical... as halophosphate mixed metal complex (PMN P-04-254) is subject to reporting under this section for...

  20. Ion conducting fluoropolymer carbonates for alkali metal ion batteries

    Science.gov (United States)

    DeSimone, Joseph M.; Pandya, Ashish; Wong, Dominica; Balsara, Nitash P.; Thelen, Jacob; Devaux, Didier

    2017-09-05

    Liquid or solid electrolyte compositions are described that comprise a homogeneous solvent system and an alkali metal salt dissolved in said solvent system. The solvent system may comprise a fluoropolymer, having one or two terminal carbonate groups covalently coupled thereto. Batteries containing such electrolyte compositions are also described.

  1. Influence of acetate ions on aluminium, gallium and indium complexing with lumogallion

    International Nuclear Information System (INIS)

    Pyatnitskij, I.V.; Boryak, A.K.; Kolomiets, L.L.

    1986-01-01

    The comparative investigation of Al, Ga and In complexing with lumogallion (LG) in the absence and in the presence of acetate ions is performed. The influence of acetate ion concentration of optical density of solutions of formed complexes as well as the pH value effect on their light absorption is studied. It has been found that in the absence of acetate ions stability of the metal complexes with LG is decreased in the Ga>In-Al series, whereas the introduction of acetate ions leads to inversion (Ga>Al>In) in the above series. The latter is explained by In binding into colorless acetate complex at pH<5. In the region of higher pH value the LG competitive ness increases due to concentration increase of coordinating dye anions and in these conditions the In coloured complex with lumogallion is formed also in the presence of acetate ions. The composition of formed complexes is established depending on pH value and acetate ion concentration. Electron absorption spectra of coloured complexes are presented

  2. Metallic ion release after knee prosthesis implantation: a prospective study.

    Science.gov (United States)

    Lons, Adrien; Putman, Sophie; Pasquier, Gilles; Migaud, Henri; Drumez, Elodie; Girard, Julien

    2017-12-01

    Metal-on-metal (MoM) hip replacement bearings produce metallic ions that can cause health complications. Metallic release also occurs with other materials, but data on metallic ion levels after knee arthroplasty are sparse. We postulate that knee replacement generates elevating metallic ions (chromium (Cr), cobalt (Co) and titanium (Ti)) during the first year after implantation. This ongoing prospective study included all patients who underwent the same type of knee arthroplasty between May and December 2013. Cr, Co and Ti levels were measured in whole blood at pre-operation and one-year follow-up (6 and 12 months). Clinical and radiographic data (range of motion, Oxford, International Knee Society (IKS) and satisfaction scores) were recorded. In 90 patients, preoperative Cr, Co and Ti metallic ion levels were respectively 0.45 μg/l, 0.22 μg/l, 2.94 μg/l and increased to 1.27 μg/l, 1.41 μg/l, 4.08 μg/l (p < 0.0001) at last one-year follow-up. Mean Oxford and IKS scores rose, respectively, from 45.9 (30-58) and 24.9 (12-52) to 88.3 (0-168) and 160.8 (93-200) (p < 0.001). After the implantation of knee arthroplasty, we found significant blood elevation of Cr, Co and Ti levels one year after implantation exceeding the normal values. This metallic ion release could lead to numerous effects: allergy, hypersensitivity, etc.

  3. Interaction of beta-amyloid(1-40) peptide with pairs of metal ions: An electrospray ion trap mass spectrometric model study.

    Science.gov (United States)

    Drochioiu, Gabi; Manea, Marilena; Dragusanu, Mihaela; Murariu, Manuela; Dragan, Ecaterina Stela; Petre, Brandusa Alina; Mezo, Gabor; Przybylski, Michael

    2009-09-01

    The stoichiometries and the affinity toward simple and paired metal ions of synthetic amyloid-beta(1-40) peptide (Abeta1-40) were investigated by electrospray ion trap mass spectrometry (ESI-MS), circular dichroism (CD), and atomic force microscopy (AFM). The results lead to the working hypothesis that pH-dependent metal binding to Abeta1-40 may induce conformational changes, which affect the affinity toward other metals. A significant copper and zinc binding to Abeta1-40 peptide at pH 5.5 was found, whereas nickel ions commonly bind to each molecule of beta-amyloid peptide. Some complexes of Abeta1-40 with more than one nickel ion were identified by ESI-MS. In addition, nickel ions proved to enhance Abeta oligomerization. On increasing pH, up to 12 ions of zinc may bind to a single Abeta molecule. Under the same pH and concentration conditions, the binding pattern of the independent copper and silver ions to Abeta1-40 was different from that of the equimolecular mixture of the two metal ions. One might assume that some conformational changes due to water loss altered the capacity of Abeta peptide to bind certain heavy metal ions. As a consequence, copper-silver interaction with the binding process to Abeta1-40 became highly complex. A competition between silver and nickel ions for Abeta1-40 binding sites at high pH was also observed. New strategies were proposed to identify the characteristic signals for some important metal ion-peptide complexes in the spectra recorded at high pH or high concentrations of metal ions. To explain the formation of such a large number of high metal ion-Abeta complexes, we took into consideration the participation of both histidine residues and free amino groups as well as carboxylate ones in the binding process. Finally, CD and AFM studies supported the mass spectrometric data.

  4. Preparation of polyelectrolyte-modified membranes for heavy metal ions removal.

    Science.gov (United States)

    Mokhter, M A; Lakard, S; Magnenet, C; Euvrard, M; Lakard, B

    2017-10-01

    Polyethersulfone membranes were modified by polyelectrolyte (PE) multilayers, made of poly(allylamine hydrochloride) with poly(styrene sulfonate), to remove Cu 2+ , Zn 2+ and Ni 2+ heavy metal cations from aqueous solutions in a wide range of metal concentration (50-1200 ppm). After characterization of the modified membranes, the efficiency of the process was estimated for single heavy metal ions solution leading to high rejection rates (>90% for 50 ppm) and good adsorption capacities (7.0-8.5 mg cm -2 ) whatever the metal ion tested. The stability in time of the modified membranes was proved by repeating successive filtrations with the same membrane. The filtration process was also used with mixed solutions composed of Cu 2+ , Zn 2+ and Ni 2+ ions. The rejection rates obtained for these ternary systems were very similar to the ones obtained for the single metal solutions, showing that the filtration process is still efficient for mixed solutions and can be applied for the decontamination of complex solutions. The long-term stability of the modified membranes was also demonstrated for mixed solutions. The high efficiency of the filtration process and the good adsorption capacities of the modified membranes are due to the ability of the PEs used to complex all the metallic dications tested in this study.

  5. Metal ammine complexes for hydrogen storage

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Sørensen, Rasmus Zink; Johannessen, Tue

    2005-01-01

    The hopes of using hydrogen as an energy carrier are severely dampened by the fact that there is still no safe, high-density method available for storing hydrogen. We investigate the possibility of using metal ammine complexes as a solid form of hydrogen storage. Using Mg(NH3)(6)Cl-2 as the example......, we show that it can store 9.1% hydrogen by weight in the form of ammonia. The storage is completely reversible, and by combining it with an ammonia decomposition catalyst, hydrogen can be delivered at temperatures below 620 K....

  6. Ion beam modification of metals: Compositional and microstructural changes

    Science.gov (United States)

    Was, Gary S.

    Ion implantation has become a highly developed tool for modifying the structure and properties of metals and alloys. In addition to direct implantation, a variety of other ion beam techniques such as ion beam mixing, ion beam assisted deposition and plasma source ion implantation have been used increasingly in recent years. The modifications constitute compositional and microstructural changes in the surface of the metal. This leads to alterations in physical properties (transport, optical, corrosion, oxidation), as well as mechanical properties (strength, hardness, wear resistance, fatigue resistance). The compositional changes brought about by ion bombardment are classified into recoil implantation, cascade mixing, radiation-enhanced diffusion, radiation-induced segregation, Gibbsian adsorption and sputtering which combine to produce an often complicated compositional variation within the implanted layer and often, well beyond. Microstructurally, the phases present are often altered from what is expected from equilibrium thermodynamics giving rise to order-disorder transformations, metastable (crystalline, amorphous or quasicrystalline) phase formation and growth, as well as densification, grain growth, formation of a preferred texture and the formation of a high density dislocation network. All these effects need to be understood before one can determine the effect of ion bombardment on the physical and mechanical properties of metals. This paper reviews the literature in terms of the compositional and microstructural changes induced by ion bombardment, whether by direct implantation, ion beam mixing or other forms of ion irradiation. The topics are introduced as well as reviewed, making this a more pedogogical approach as opposed to one which treats only recent developments. The aim is to provide the tools needed to understand the consequent changes in physical and mechanical properties.

  7. Interaction of Different Divalent Metal Ions with Lipid Bilayer: Impact on the Encapsulation of Doxorubicin by Lipid Bilayer and Lipoplex Mediated Deintercalation.

    Science.gov (United States)

    Das, Anupam; Adhikari, Chandan; Chakraborty, Anjan

    2017-03-02

    In this article, we investigate the influence of different metal ions (Ca 2+ , Mg 2+ , and Zn 2+ ) on binding of an anticancer drug doxorubicin (DOX) to DMPC bilayer and lipoplex mediated deintercalation of DOX from DOX-DNA complex. Our study reveals that lipid bilayer in the presence of different metal ions displays much higher binding affinity toward DOX than bare lipid bilayer does. Further, this affinity for a particular metal ion increases linearly with metal ion concentration. The steady state and time-resolved fluorescence studies reveal that binding of DOX with lipid bilayer in the presence of different metal ions varies in the order of Ca 2+ > Mg 2+ > Zn 2+ . The rotational relaxation of DOX in the presence of different metal ions takes place in the same order. We explain these phenomena in the light of alteration of the physical properties brought about by metal ions. Moreover, we find that binding pattern of metal ions with lipid head groups influences the intake of DOX in lipid bilayer. We exploit the binding of DOX with bilayer to study the deintercalation of DOX from DOX-DNA complex. We observe that with increase in metal ion concentration the deintercalation increases. Among all metal ions, Ca 2+ appears to be most effective in deintercalation compared to other metal ions. The time-resolved fluorescence anisotropy and circular dichroism measurements indicate that in the presence of Ca 2+ , lipid bilayer offer strongest interaction with DNA while the same is weakest for Zn 2+ . This explains the highest percentage of deintercalation of DOX from drug-DNA complex in the presence of Ca 2+ . Overall the present study demonstrates a new strategy that binding of drug molecules with lipid bilayer and deintercalation of the same from drug-DNA complex can be tuned by modulation of lipid bilayer with different metal ions and their concentration.

  8. Structural and thermal characterization of ternary complexes of piroxicam and alanine with transition metals: Uranyl binary and ternary complexes of piroxicam. Spectroscopic characterization and properties of metal complexes

    Science.gov (United States)

    Mohamed, Gehad G.

    2005-12-01

    Ternary Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and UO 2(II) complexes with piroxicam (Pir) drug (H 2L 1) and dl-alanine (Ala) (HL 2) and also the binary UO 2(II) complex with Pir were studied. The structures of the complexes were elucidated using elemental, IR, molar conductance, magnetic moment, diffused reflectance and thermal analyses. The UO 2(II) binary complex was isolated in 1:2 ratio with the formula [UO 2(H 2L) 2](NO 3) 2. The ternary complexes were isolated in 1:1:1 (M:H 2L 1:L 2) ratios. The solid complexes were isolated in the general formulae [M(H 2L)(L 2)(Cl) n(H 2O) m]· yH 2O (M = Fe(III) ( n = 2, m = 0, y = 1), Co(II) ( n = 1, m = 1, y = 2) and Ni(II) ( n = 1, m = 1, y = 0)); [M(H 2L)(L 2)](X) z· yH 2O (M = Cu(II) (X = AcO, z = 1, y = 0), Zn(II) (X = AcO, z = 1, y = 3) and UO 2(II) (X = NO 3, z = 1, y = 2)). Pir behaves as a neutral bidentate ligand coordinated to the metal ions via the pyridine-N and carbonyl-O groups, while Ala behaves as a uninegatively bidentate ligand coordinated to the metal ions via the deprotonated carboxylate-O and amino-N. The magnetic and reflectance spectral data show that the complexes have octahedral geometry except Cu(II) and Zn(II) complexes have tetrahedral structures. The thermal decomposition of the complexes was discussed in relation to structure, and the thermodynamic parameters of the decomposition stages were evaluated.

  9. Complementary metal ion specificity of the metal-citrate transporters CitM and CitH of Bacillus subtilis

    NARCIS (Netherlands)

    Krom, BP; Warner, JB; Konings, WN; Lolkema, JS; Warner, Jessica B.

    2000-01-01

    Citrate uptake in Bacillus subtilis is stimulated by a wide range of divalent metal ions. The metal ions were separated into two groups based on the expression pattern of the uptake system. The two groups correlated with the metal ion specificity of two homologous B, subtilis secondary citrate

  10. Ion exchange of some transition metal cations on hydrated titanium dioxide in aqueous ammonia solutions

    International Nuclear Information System (INIS)

    Bilewicz, A.; Narbutt, J.; Dybczynski, R.

    1992-01-01

    The adsorption of transition metal cations on hydrated titanium dioxide in complexing ammonia and amine solutions has been studied as a function of ammonia (amine) concentration. The relationships between the distribution coefficients and ammonia concentration as well as the effects of various amines on sorption of transition metals indicate that a coordinate bond is formed between the metal ions and the hydroxy groups of the sorbent. The distribution coefficients of silver(I) and cobalt(II), which form strong ammonia complexes in aqueous solutions, decrease with increasing concentration of ammonia already at concentrations exceeding 10 -3 *mol*dm -3 . Cations of zinc, manganese and mercury which form much weaker ammonia complexes do not exhibit any effect of ammonia concentration in the whole range investigated. In the case of sorption of macroamounts of ammonia or amine complexes of silver, the molecular sieve effect plays an important role. The differences in the affinity of hydrated titanium dioxide for ammonia solvates of various transition metal ions can serve as a tool for effective separation of these ions in ammonia solutions. (author) 10 refs.; 4 figs.; 1 tab

  11. A possible role of alkali metal ions in the synthesis of pure-silica molecular sieves

    OpenAIRE

    Goepper, Michelle; Li, Hong-Xin; Davis, Mark E.

    1992-01-01

    Pure-silica ZSM-12 is synthesized in the presence and absence of alkali metal ions; addition of alkali metal ions at constant hydroxide ion concentration increases the crystallization rate of ZSM-12, and it is suggested that alkali metal ions participate in both the nucleation and crystal growth processes.

  12. Radiation hardening of metals irradiated by heavy ions

    International Nuclear Information System (INIS)

    Didyk, A.Yu.; Skuratov, V.A.; Mikhajlova, N.Yu.; Regel', V.R.

    1988-01-01

    The damage dose dependence in the 10 -4 -10 -2 dpa region of radiation hardening of Al, V, Ni, Cu irradiated by xenon ions with 124 MeV energy is investigated using the microhardness technique and transmission electron microscope. It is shown that the pure metals radiation hardening is stimulated for defects clusters with the typical size less than 5 nm, as in the case of neutron and the light charge ion irradiation

  13. A versatile MOF-based trap for heavy metal ion capture and dispersion.

    Science.gov (United States)

    Peng, Yaguang; Huang, Hongliang; Zhang, Yuxi; Kang, Chufan; Chen, Shuangming; Song, Li; Liu, Dahuan; Zhong, Chongli

    2018-01-15

    Current technologies for removing heavy metal ions are typically metal ion specific. Herein we report the development of a broad-spectrum heavy metal ion trap by incorporation of ethylenediaminetetraacetic acid into a robust metal-organic framework. The capture experiments for a total of 22 heavy metal ions, covering hard, soft, and borderline Lewis metal ions, show that the trap is very effective, with removal efficiencies of >99% for single-component adsorption, multi-component adsorption, or in breakthrough processes. The material can also serve as a host for metal ion loading with arbitrary selections of metal ion amounts/types with a controllable uptake ratio to prepare well-dispersed single or multiple metal catalysts. This is supported by the excellent performance of the prepared Pd 2+ -loaded composite toward the Suzuki coupling reaction. This work proposes a versatile heavy metal ion trap that may find applications in the fields of separation and catalysis.

  14. Focused ion beam lithography for rapid prototyping of metallic films

    Energy Technology Data Exchange (ETDEWEB)

    Osswald, Patrick; Kiermaier, Josef; Becherer, Markus; Schmitt-Landsiedel, Doris [Lehrstuhl fuer Technische Elektronik, TU Muenchen, Munich (Germany)

    2010-07-01

    We present FIB-lithography methods for rapid and cost-effective prototyping of metal structures covering the deep-submicron- to the millimeter-range in a single lithography cycle. Focused ion beam (FIB) systems are widely used in semiconductor industry and research facilities for both analytical testing and prototyping. A typical application is to apply electrical contact to micron-sized sensors/particles by FIB induced metal deposition. However, as for E-beam lithography, patterning times for large area bonding pads are unacceptably long, resulting in cost-intensive prototyping. In this work, we optimized FIB lithography processing for negative and positive imaging mode to form metallic structures for large-areas down do the sub-100 nm range. For negative lithography features are defined by implanting Ga{sup +}-ions into a commercial photo resist, without affecting the underlying structures by impinging ions. The structures are highly suitable for following lift-off processing due to the undercut of the resist.Metallic feature size of down to 150 nm are achievable. For positive lithography a PMMA resist is exposed in FIB irradiation. Due to the very low dose (3.10{sup 12} ions/cm{sup 2}) the writing time for an e.g. 100 {mu}m x 100 {mu}m square is approx. 15 seconds. The developed resist is used for subsequent wet chemical etching, obtaining a 100 nm resolution in metal layers.

  15. Albumin as marker for susceptibility to metal ions in metal-on-metal hip prosthesis patients.

    Science.gov (United States)

    Facchin, F; Catalani, S; Bianconi, E; Pasquale, D De; Stea, S; Toni, A; Canaider, S; Beraudi, A

    2017-04-01

    Metal-on-metal (MoM) hip prostheses are known to release chromium and cobalt (Co), which negatively affect the health status, leading to prosthesis explant. Albumin (ALB) is the main serum protein-binding divalent transition metals. Its binding capacity can be affected by gene mutations or modification of the protein N-terminal region, giving the ischaemia-modified albumin (IMA). This study evaluated ALB, at gene and protein level, as marker of individual susceptibility to Co in MoM patients, to understand whether it could be responsible for the different management of this ion. Co was measured in whole blood, serum and urine of 40 MoM patients. A mutational screening of ALB was performed to detect links between mutations and metal binding. Finally, serum concentration of total ALB and IMA were measured. Serum total ALB concentration was in the normal range for all patients. None of the subjects presented mutations in the investigated gene. Whole blood, serum and urine Co did not correlate with serum total ALB or IMA, although IMA was above the normal limit in most subjects. The individual susceptibility is very important for patients' health status. Despite the limited results of this study, we provide indications on possible future investigations on the toxicological response to Co.

  16. Adsorption of Metallic Ions onto Chitosan : Equilibrium and Kinetic Studies

    OpenAIRE

    Benavente, Martha

    2008-01-01

    Equilibrium isotherms and the adsorption kinetics of heavy metals onto chitosan were studied experimentally. Chitosan, a biopolymer produced from crustacean shells, has applications in various areas, particularly in drinking water and wastewater treatment due to its ability to remove metallic ions from solutions. The adsorption capacity of chitosan depends on a number of parameters: deacetylation degree, molecular weight, particle size and crystallinity. The purpose of this work was to study ...

  17. Metal ion binding to iron oxides

    NARCIS (Netherlands)

    Hiemstra, T.; Riemsdijk, van W.H.; Benedetti, M.F.; Ponthieu, M.

    2006-01-01

    The biogeochemistry of trace elements (TE) is largely dependent upon their interaction with heterogeneous ligands including metal oxides and hydrous oxides of iron. The modeling of TE interactions with iron oxides has been pursued using a variety of chemical models. The objective of this work is to

  18. DETERMINATION OF METAL IONS RELEASED BY STAINLESS ...

    African Journals Online (AJOL)

    Preferred Customer

    Also taking into account the fact that, in body conditions implant corrosion products are disseminated and eventually eliminated. The result that SS arch bar used in orthodontic appliances corrode in bio-fluids over an extended time interval is of great clinical significance in evaluating their bio-compatibility, the levels of metal.

  19. Preparation and characterisation of some transition metal complexes of niacinamide (vitamin b3)

    International Nuclear Information System (INIS)

    Hasan, M.M.; Hossain, M.E.; Halim, M.E.

    2015-01-01

    Niacinamide forms metal complexes of general formula (M(C/sub 6/H/sub 6/N/sub 2/O)2)Cl/sub 2/; where M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) in the aqueous medium. The complexes were formulated by comparing the experimental and calculated data for C, H, N and metal. The prepared complexes were characterized by different physicochemical methods. The UV-vis, FTIR spectral analysis and thermo gravimetric analysis (TGA). TGA of these complexes have been discussed. Magnetic susceptibility values indicate that all complexes except Zn complex are paramagnetic in nature. The redox properties of the metal ions in the Mn, Cu and Zn complexes have been discussed from the cyclic voltammetric studies. In all cases the systems are quasi reversible. (author)

  20. Data mining of metal ion environments present in protein structures.

    Science.gov (United States)

    Zheng, Heping; Chruszcz, Maksymilian; Lasota, Piotr; Lebioda, Lukasz; Minor, Wladek

    2008-09-01

    Analysis of metal-protein interaction distances, coordination numbers, B-factors (displacement parameters), and occupancies of metal-binding sites in protein structures determined by X-ray crystallography and deposited in the PDB shows many unusual values and unexpected correlations. By measuring the frequency of each amino acid in metal ion-binding sites, the positive or negative preferences of each residue for each type of cation were identified. Our approach may be used for fast identification of metal-binding structural motifs that cannot be identified on the basis of sequence similarity alone. The analysis compares data derived separately from high and medium-resolution structures from the PDB with those from very high-resolution small-molecule structures in the Cambridge Structural Database (CSD). For high-resolution protein structures, the distribution of metal-protein or metal-water interaction distances agrees quite well with data from CSD, but the distribution is unrealistically wide for medium (2.0-2.5A) resolution data. Our analysis of cation B-factors versus average B-factors of atoms in the cation environment reveals substantial numbers of structures contain either an incorrect metal ion assignment or an unusual coordination pattern. Correlation between data resolution and completeness of the metal coordination spheres is also found.

  1. Ions, isotopes, and metal cyanides: Observational and laboratory studies

    Science.gov (United States)

    Savage, Chandra Shannon

    2004-11-01

    Chemistry in the interstellar medium is very different from the processes which take place in terrestrial settings. Environments such as circumstellar envelopes, molecular clouds, and comets contain diverse and complex chemical networks. The low temperatures (10 50 K) and densities (1 10 6 cm-3) allow normally unstable molecules to exist in significant quantities. At these temperatures, the rotational energy levels of molecules are populated, and thus these species can be detected by millimeter-wave radio astronomy. The detection and quantification of interstellar molecules, including metal cyanides and molecular ions, is the basis of this dissertation work. While conducting observations of CN and 13CN to determine the 12C/13C ratio throughout the Galaxy, it was found that the ratios in photon- dominated regions (PDRs) were much higher than those in nearby molecular clouds. This can be explained by isotope-selective photodissociation, in which the 12CN molecules are self-shielded. However, the chemistry in these regions is poorly understood, and other processes may be occurring. In order to understand one of the chemical networks present in PDRs, observations of HCO+, HOC +, and CO+ were made toward several of these sources. Previous studies indicated that the HCO+/HOC+ ratio was much lower in PDRs, due to the presence of CO+. The new observations indicate that there is a strong correlation between CO + and HOC+ abundances, which suggests that other molecular ions which have not been detected in molecular clouds may be present in PDRs. There is a significant obstacle to the detection of new interstellar molecular ions, however. The laboratory spectra are virtually unknown for many of these species, due to their inherent instability. Thus, techniques which can selectively detect ionic spectra must be utilized. One such method is velocity modulation, which incorporates an AC electrical discharge to produce and detect ions. Previously, velocity modulation spectroscopy

  2. Synthesis, spectral, thermal, potentiometric and antimicrobial studies of transition metal complexes of tridentate ligand

    Directory of Open Access Journals (Sweden)

    Sarika M. Jadhav

    2014-01-01

    Full Text Available A series of metal complexes of Cu(II, Ni(II, Co(II, Fe(III and Mn(II have been synthesized with newly synthesized biologically active tridentate ligand. The ligand was synthesized by condensation of dehydroacetic acid (3-acetyl-6-methyl-(2H pyran-2,4(3H-dione or DHA, o-phenylene diamine and fluoro benzaldehyde and characterized by elemental analysis, molar conductivity, magnetic susceptibility, thermal analysis, X-ray diffraction, IR, 1H-NMR, UV–Vis spectroscopy and mass spectra. From the analytical data, the stoichiometry of the complexes was found to be 1:2 (metal:ligand with octahedral geometry. The molar conductance values suggest the non-electrolyte nature of metal complexes. The IR spectral data suggest that the ligand behaves as a dibasic tridentate ligand with ONN donor atoms sequence towards central metal ion. Thermal behaviour (TG/DTA and kinetic parameters calculated by the Coats–Redfern and Horowitz–Metzger method suggest more ordered activated state in complex formation. To investigate the relationship between stability constants of metal complexes and antimicrobial activity, the dissociation constants of Schiff bases and stability constants of their binary metal complexes have been determined potentiometrically in THF–water (60:40% solution at 25 ± 1 °C and at 0.1 M NaClO4 ionic strength. The potentiometric study suggests 1:1 and 1:2 complexation. Antibacterial and antifungal activities in vitro were performed against Staphylococcus aureus, Escherichia coli and Aspergillus niger, Trichoderma, respectively. The stability constants of the metal complexes were calculated by the Irving–Rosotti method. A relation between the stability constant and antimicrobial activity of complexes has been discussed. It is observed that the activity enhances upon complexation and the order of antifungal activity is in accordance with stability order of metal ions.

  3. Performance of the CERN Heavy Ion production complex

    CERN Document Server

    Manglunki, D; Bartosik, H; Bellodi, G; Blas, A; Bohl, T; Carli, C; Carlier, E; Cettour Cave, S; Cornelis, K; Damerau, H; Efthymiopoulos, I; Findlay, A; Gilardoni, S; Hancock, S; Jowett, JM; Kuchler, D; Maury, S; O'Neil, M; Papaphilippou, Y; Pasinelli, S; Scrivens, R; Tranquille, G; Vandorpe, B; Wehrle, U; Wenninger, J

    2012-01-01

    The second LHC ion run took place at 1.38 A TeV/c per beam in autumn 2011; more than 100 inverse microbarns were accumulated by each of the experiments. In addition, the LHC injector chain delivered primary Pb and secondary Be ion beams to fixed target experiments in the SPS North Area. This paper presents the current performance of the heavy ion production complex, and prospects to further improve it in the near future.

  4. Immobilization of Metal Hexacyanoferrate Ion-Exchangers for the Synthesis of Metal Ion Sorbents—A Mini-Review

    Directory of Open Access Journals (Sweden)

    Thierry Vincent

    2015-11-01

    Full Text Available Metal hexacyanoferrates are very efficient sorbents for the recovery of alkali and base metal ions (including radionuclides such as Cs. Generally produced by the direct reaction of metal salts with potassium hexacyanoferrate (the precursors, they are characterized by ion-exchange and structural properties that make then particularly selective for Cs(I, Rb(I and Tl(I recovery (based on their hydrated ionic radius consistent with the size of the ion-exchanger cage, though they can bind also base metals. The major drawback of these materials is associated to their nanometer or micrometer size that makes them difficult to recover in large-size continuous systems. For this reason many techniques have been designed for immobilizing these ion-exchangers in suitable matrices that can be organic (mainly polymers and biopolymers or inorganic (mineral supports, carbon-based matrices. This immobilization may proceed by in situ synthesis or by entrapment/encapsulation. This mini-review reports some examples of hybrid materials synthesized for the immobilization of metal hexacyanoferrate, the different conditionings of these composite materials and, briefly, the parameters to take into account for their optimal design and facilitated use.

  5. Breast milk metal ion levels in a young and active patient with a metal-on-metal hip prosthesis.

    Science.gov (United States)

    Nelis, Raymond; de Waal Malefijt, Jan; Gosens, Taco

    2013-01-01

    Metal-on-metal resurfacing arthroplasty of the hip has been used increasingly over the last 10 years in younger active patients. The dissolution of the metal wear particles results in measurable increases in cobalt and chromium ions in the serum and urine of patients with a metal-on-metal bearing. We measured the cobalt, chromium, and molybdenum ion levels in urine; serum; and breast milk in a young and active patient with a metal-on-metal hip prosthesis after a pathologic fracture of the femoral neck. Metal-on-metal hip prosthesis leads to increasing levels of molybdenum in breast milk in the short-term follow-up. There are no increasing levels of chromium and cobalt ions in breast milk. Besides the already known elevated concentrations in serum of chromium and cobalt after implantation of a metal-on-metal hip prosthesis, we found no increasing levels of chromium and cobalt in urine. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Adsorption of heavy metals ions on portulaca oleracea plants

    International Nuclear Information System (INIS)

    Naqvi, R.R.

    2005-01-01

    The aim of this study is to report the ability of portulaca oleracea (Fershi in Urdu) biomass grown in uncontaminated soils to adsorb or uptake lead, cadmium, arsenic, cobalt and copper from aqueous solutions. In order to help understand the metal binding mechanism, laboratory experiments performance to determine optimal binding, and binding capacity for each of the above mentioned metals. These experiments were carried out for the mass of crushed portulaca stems. Portulaca is a plant that grows abundantly in temperature climate in the area of Quetta Balochistan. It has reddish stem and thick succulent leaves. This plant has been found to be good adsorbent for heavy metals ions. (author)

  7. Engineering Metal Ion Coordination to Regulate Amyloid Fibril Assembly And Toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Dong, J.; Canfield, J.M.; Mehta, A.K.; Shokes, J.E.; Tian, B.; Childers, W.S.; Simmons, J.A.; Mao, Z.; Scott, R.A.; Warncke, K.; Lynn, D.G.

    2009-06-02

    Protein and peptide assembly into amyloid has been implicated in functions that range from beneficial epigenetic controls to pathological etiologies. However, the exact structures of the assemblies that regulate biological activity remain poorly defined. We have previously used Zn{sup 2+} to modulate the assembly kinetics and morphology of congeners of the amyloid {beta} peptide (A{beta}) associated with Alzheimer's disease. We now reveal a correlation among A{beta}-Cu{sup 2+} coordination, peptide self-assembly, and neuronal viability. By using the central segment of A{beta}, HHQKLVFFA or A{beta}(13-21), which contains residues H13 and H14 implicated in A{beta}-metal ion binding, we show that Cu{sup 2+} forms complexes with A{beta}(13-21) and its K16A mutant and that the complexes, which do not self-assemble into fibrils, have structures similar to those found for the human prion protein, PrP. N-terminal acetylation and H14A substitution, Ac-A{beta}(13-21)H14A, alters metal coordination, allowing Cu{sup 2+} to accelerate assembly into neurotoxic fibrils. These results establish that the N-terminal region of A{beta} can access different metal-ion-coordination environments and that different complexes can lead to profound changes in A{beta} self-assembly kinetics, morphology, and toxicity. Related metal-ion coordination may be critical to the etiology of other neurodegenerative diseases.

  8. Selective chelation-supercritical fluid extraction of metal ions from waste materials

    International Nuclear Information System (INIS)

    Wai, C.N.; Laintz, K.E.; Yonker, C.R.

    1993-01-01

    The removal of toxic organics, metals, and radioisotopes from solids or liquids is a major concern in the treatment of industrial and nuclear wastes. For this reason, developing methods for selective separation of toxic metals and radioactive materials from solutions of complex matrix is an important problem in environmental research. Recent developments indicate supercritical fluids are good solvents for organic compounds. Many gases become supercritical fluids under moderate temperatures and pressures. For example, the critical temperature and pressure of carbon dioxide are 31 degrees C and 73 atm, respectively. The high diffusivity, low viscosity, and T-P dependence of solvent strength are some attractive properties of supercritical fluid extraction (SFE). Since CO 2 offers the additional benefits of stability and non-toxicity, the SFE technique avoids generation of organic liquid waste and exposure of personnel to toxic solvents. While direct extraction of metal ions by supercritical fluids is highly inefficient, these ions when complexed with organic ligands become quite soluble in supercritical fluids. Specific ligands can be used to achieve selective extraction of metal ions in this process. After SFE, the fluid phase can be depressurized for precipitation of the metal chelates and recycled. The ligand can also be regenerated for repeated use. The success of this selective chelation-supercritical fluid extraction (SC-SFE) process depends on a number of factors including the efficiencies of the selective chelating agents, solubilities of metal chelates in supercritical fluids, rate of extraction, ease of regeneration of the ligands, etc. In this report, the authors present recent results on the studies of the solubilities of metal chelates in supercritical CO 2 , experimental ions from aqueous solution, and the development of selective chelating agents (ionizable crown ethers) for the extraction of lanthanides and actinides

  9. Traveling-wave ion mobility mass spectrometry of protein complexes

    DEFF Research Database (Denmark)

    Salbo, Rune; Bush, Matthew F; Naver, Helle

    2012-01-01

    The collision cross-section (Ω) of a protein or protein complex ion can be measured using traveling-wave (T-wave) ion mobility (IM) mass spectrometry (MS) via calibration with compounds of known Ω. The T-wave Ω-values depend strongly on instrument parameters and calibrant selection. Optimization...

  10. Chromium and cobalt ion concentrations in blood and serum following various types of metal-on-metal hip arthroplasties

    DEFF Research Database (Denmark)

    Jantzen, Christopher; Jørgensen, Henrik L; Duus, Benn R

    2013-01-01

    Widely different metal ion concentrations in blood and serum have been reported with metal-on-metal (MoM) implants. We reviewed the literature on blood and serum ion concentrations of chromium (Cr) and cobalt (Co) following various MoM hip arthroplasties.......Widely different metal ion concentrations in blood and serum have been reported with metal-on-metal (MoM) implants. We reviewed the literature on blood and serum ion concentrations of chromium (Cr) and cobalt (Co) following various MoM hip arthroplasties....

  11. Effects of Alkali-Metal Ions and Counter Ions in Sn-Beta-Catalyzed Carbohydrate Conversion.

    Science.gov (United States)

    Elliot, Samuel G; Tolborg, Søren; Madsen, Robert; Taarning, Esben; Meier, Sebastian

    2018-02-26

    Alkali-metal ions have recently been shown to strongly influence the catalytic behavior of stannosilicates in the conversion of carbohydrates. An effect of having alkali-metal ions present is a pronounced increase in selectivity towards methyl lactate. Mechanistic details of this effect have remained obscure and are herein addressed experimentally through kinetic experiments and isotope tracking. The presence of alkali-metal ions has a differential effect in competing reaction pathways and promotes the rate of carbon-carbon bond breakage of carbohydrate substrates, but decreases the rates of competing dehydration pathways. Further addition of alkali-metal ions inhibits the activity of Sn-Beta in all major reaction pathways. The alkali-metal effects on product distribution and on the rate of product formation are similar, thus pointing to a kinetic reaction control and to irreversible reaction steps in the main pathways. Additionally, an effect of the accompanying basic anions is shown, supposedly facilitating the cation exchange and eliciting a different concentration-dependent effect to that of neutral alkali-metal salts. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Host Materials for Transition-Metal Ions

    Science.gov (United States)

    1989-09-01

    Phys. 5cr. 25 (1982), 924. J4. L. DiSiplo, E. Tondello, G. De~ichelis, and L. Oleari , Slater-Condon Parameters for Atoms and Ions of the Second...Bnm* Frequently, the point-charge crystal-field components, Anm, indicate the correct phase relations and are used to determine the phases reported in...745. 5. W. L. Bond, Measurement of the Refractive Indices of Several Crystals, J. Appl. Phys. 36 (1965), 1674. 6. G. Burns, E. A. Geiss, B. A

  13. Critical survey of stability constants of EDTA complexes critical evaluation of equilibrium constants in solution stability constants of metal complexes

    CERN Document Server

    Anderegg, G

    2013-01-01

    Critical Survey of Stability Constants of EDTA Complexes focuses on the computations, values, and characteristics of stability constants. The book emphasizes that for a critical discussion of experimentally determined stability constants, it is important to consider the precision of the values that manifests the self-consistency of the constant, taking into consideration the random errors. The publication reviews the stability constants of metal complexes. The numerical calculations affirm the reactions and transformations of metal ions when exposed to varying conditions. The text also present

  14. Synthesis, photophysical and metal ion signalling behaviour of mono

    Indian Academy of Sciences (India)

    Unknown

    Fluorescence decay behaviour of the systems suggests a through-space nature of PET. The systems exhi- bit off–on fluorescence signalling in the aprotic media in the presence of several metal ions, some of which are well known for their fluorescence quenching abilities. Diazacrown derivative, II, appears to be a somewhat ...

  15. Utilization of Plant Refuses as Component of Heavy Metal Ion ...

    African Journals Online (AJOL)

    The ability of the fabricated sensors to detect the presence of heavy metals was analyzed using electrochemical methods like cyclic voltammetry and differential pulse anodic stripping voltammetry. Results showed that the fabricated electrode were able to detect the presence of mercury and lead ions in aqueous solutions ...

  16. Removal of metal ions using dead-end filtration

    African Journals Online (AJOL)

    2005-07-03

    Jul 3, 2005 ... Surfactants due to their high selectivity properties have been used in enhancing membrane filtration for the removal of metal ions in aqueous solutions. Natural surfactants are preferred to synthetic surfactants because the synthetic surfactants have the disadvantage of introducing secondary pollutants into ...

  17. Equilibrium and kinetics studies of metal ion adsorption on dyed ...

    African Journals Online (AJOL)

    Batch equilibration studies were conducted to determine the nature of adsorption of Zn (II) and Cu (II) onto dyed coconut pollens. The nature of adsorption of metal ions was explained using the Langmuir equation. The calculated values of equilibrium parameter indicated favourable adsorption by the adsorbents. Also the ...

  18. Effect of metal ion doping on the photocatalytic activity of ...

    Indian Academy of Sciences (India)

    The activity can be enhanced by the increasing of concentration of the doped metal ions. TiAlPO-5 (4, 8, 12 atom % of Ti) showed the highest photocatalytic activity among all the compounds and its activity was compared to that of Degussa P25 (TiO2). The activity of photocatalysts was correlated with the diffuse reflectance ...

  19. Equilibrium and kinetics studies of metal ion adsorption on dyed ...

    African Journals Online (AJOL)

    GREGO

    2007-04-02

    Apr 2, 2007 ... Batch equilibration studies were conducted to determine the nature of adsorption of Zn (II) and Cu (II) onto dyed coconut pollens. The nature of adsorption of metal ions was explained using the Langmuir equation. The calculated values of equilibrium parameter indicated favourable adsorption by the.

  20. Ion exchangers as adsorbents for removing metals from aquatic media.

    Science.gov (United States)

    Khan, Meraj A; Bushra, Rani; Ahmad, Anees; Nabi, Syed A; Khan, Dilwar A; Akhtar, Arshia

    2014-02-01

    A polyaniline-based composite cation-exchange material was synthesized by way of sol-gel method and studied to explore its analytical and environmental applications. It was characterized by using instrumental analyses [Fourier transform infrared (spectrometer), X-ray, thermogravimetric analysis/differential thermal analysis, standard electron microscopy, and transmission electron microscopy]. Physicochemical studies, such as ion-exchange capacity, pH titrations, and chemical stability, along with effect of eluent concentration and elution, were also performed to exploit the ion-exchange capabilities. pH titration studies showed that the material presents monofunctional strong cation-exchange behavior. This nanocomposite material is semicrystalline in nature and exhibits improved thermal and chemical stability. The partition coefficient studies of different metal ions in the material were performed in demineralised water and different surfactant media, and it was found to be selective for Pb(II) and Hg(II) ions. To exploit the usefulness of the material as an adsorbent, some important quantitative binary separations of metal ions were performed on polyaniline Zr(IV) molybdophosphate columns. This composite cation exchanger can be applied for the treatment of polluted water to remove heavy metals.

  1. Broad-beam, high current, metal ion implantation facility

    International Nuclear Information System (INIS)

    Brown, I.G.; Dickinson, M.R.; Galvin, J.E.; Godechot, X.; MacGill, R.A.

    1990-07-01

    We have developed a high current metal ion implantation facility with which high current beams of virtually all the solid metals of the Periodic Table can be produced. The facility makes use of a metal vapor vacuum arc ion source which is operated in a pulsed mode, with pulse width 0.25 ms and repetition rate up to 100 pps. Beam extraction voltage is up to 100 kV, corresponding to an ion energy of up to several hundred keV because of the ion charge state multiplicity; beam current is up to several Amperes peak and around 10 mA time averaged delivered onto target. Implantation is done in a broad-beam mode, with a direct line-of-sight from ion source to target. Here we describe the facility and some of the implants that have been carried out using it, including the 'seeding' of silicon wafers prior to CVD with titanium, palladium or tungsten, the formation of buried iridium silicide layers, and actinide (uranium and thorium) doping of III-V compounds. 16 refs., 6 figs

  2. Do soft drinks affect metal ions release from orthodontic appliances?

    Science.gov (United States)

    Mikulewicz, Marcin; Wołowiec, Paulina; Loster, Bartłomiej W; Chojnacka, Katarzyna

    2015-01-01

    The effect of orange juice and Coca Cola(®) on the release of metal ions from fixed orthodontic appliances. A continuous flow system designed for in vitro testing of orthodontic appliances was used. Orange juice/Coca Cola(®) was flowing through the system alternately with artificial saliva for 5.5 and 18.5h, respectively. The collected samples underwent a multielemental ICP-OES analysis in order to determine the metal ions release pattern in time. The total mass of ions released from the appliance into orange juice and Coca Cola(®) (respectively) during the experiment was calculated (μg): Ni (15.33; 37.75), Cr (3.604; 1.052), Fe (48.42; ≥ 156.1), Cu (57.87, 32.91), Mn (9.164; 41.16), Mo (9.999; 30.12), and Cd (0.5967; 2.173). It was found that orange juice did not intensify the release of metal ions from orthodontic appliances, whereas Coca Cola(®) caused increased release of Ni ions. Copyright © 2015 Elsevier GmbH. All rights reserved.

  3. Production and sympathetic cooling of complex molecular ions

    International Nuclear Information System (INIS)

    Zhang, Chaobo

    2008-01-01

    This thesis reports on experimental and theoretical studies of the sympathetic cooling of complex molecular ions demonstrating that this general method for cooling atomic and molecular ions is reliable and efficient. For this purpose, complex molecular ions and barium ions have been confined simultaneously in a linear Paul trap. The complex molecular ions are generated in an electrospray ionization system and transferred to the trap via a 2 m long octopole ion guide. These molecular ions are pre-cooled by room temperature helium buffer gas so that they can be captured by the trap. The atomic barium ions are loaded from a barium evaporator oven and are laser-cooled by a 493 nm cooling laser and a 650 nm repumping laser. Due to the mutual Coulomb interaction among these charged particles, the kinetic energy of the complex molecular ions can be reduced significantly. In our experiments we have demonstrated the sympathetic cooling of various molecules (CO 2 , Alexa Fluor 350, glycyrrhetinic acid, cytochrome c) covering a wide mass range from a few tens to 13000 amu. In every case the molecular ions could be cooled down to millikelvin temperatures. Photo-chemical reactions of the 138 Ba + ions in the ( 2 P 1/2 ) excited state with gases such as O 2 , CO 2 , or N 2 O, could be observed. If the initial 138 Ba + ion ensemble is cold, the produced 138 BaO + ions are cold as well, with a similar temperature as the laser-cooled barium ions (a few tens of millikelvin). The back-reaction of 138 BaO + ions with neutral CO to 138 Ba + is possible and was observed in our experiments as well. A powerful molecular dynamics (MD) simulation program has been developed. With this program dynamic properties of ion ensembles, such as sympathetic interactions or heating effects, have been investigated and experimental results have been analyzed to obtain, for example, ion numbers and temperatures. Additionally, the feasibility of nondestructive spectroscopy via an optical dipole excitation

  4. Production and sympathetic cooling of complex molecular ions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Chaobo

    2008-06-24

    This thesis reports on experimental and theoretical studies of the sympathetic cooling of complex molecular ions demonstrating that this general method for cooling atomic and molecular ions is reliable and efficient. For this purpose, complex molecular ions and barium ions have been confined simultaneously in a linear Paul trap. The complex molecular ions are generated in an electrospray ionization system and transferred to the trap via a 2 m long octopole ion guide. These molecular ions are pre-cooled by room temperature helium buffer gas so that they can be captured by the trap. The atomic barium ions are loaded from a barium evaporator oven and are laser-cooled by a 493 nm cooling laser and a 650 nm repumping laser. Due to the mutual Coulomb interaction among these charged particles, the kinetic energy of the complex molecular ions can be reduced significantly. In our experiments we have demonstrated the sympathetic cooling of various molecules (CO{sub 2}, Alexa Fluor 350, glycyrrhetinic acid, cytochrome c) covering a wide mass range from a few tens to 13000 amu. In every case the molecular ions could be cooled down to millikelvin temperatures. Photo-chemical reactions of the {sup 138}Ba{sup +} ions in the ({sup 2}P{sub 1/2}) excited state with gases such as O{sub 2}, CO{sub 2}, or N{sub 2}O, could be observed. If the initial {sup 138}Ba{sup +} ion ensemble is cold, the produced {sup 138}BaO{sup +} ions are cold as well, with a similar temperature as the laser-cooled barium ions (a few tens of millikelvin). The back-reaction of {sup 138}BaO{sup +} ions with neutral CO to {sup 138}Ba{sup +} is possible and was observed in our experiments as well. A powerful molecular dynamics (MD) simulation program has been developed. With this program dynamic properties of ion ensembles, such as sympathetic interactions or heating effects, have been investigated and experimental results have been analyzed to obtain, for example, ion numbers and temperatures. Additionally, the

  5. The use of new chemically modified cellulose for heavy metal ion adsorption.

    Science.gov (United States)

    Fakhre, Nabil A; Ibrahim, Bnar M

    2018-02-05

    We have developed a simple one-step method to synthesize novel supramolecular polysaccharide composite from cellulose (CEL) and dibenzo-18-crown 6 using ceric ammonium nitrate as initiator. The [CEL+DB18C6] composites obtained retain properties of their components, namely superior mechanical strength (from CEL), excellent adsorption capability for heavy metal ions from DB18C6. More importantly, the [CEL+DB18C6] composites exhibit truly supramolecular properties. By itself CEL and DB18C6 can adsorb heavy metals. However, adsorption capability of the composite was substantially and synergistically enhanced by adding DB18C6 to CEL. That is, the removal percentage value for Cd 2+ , Zn 2+ , Ni 2+ , Pb 2+ and Cu 2+ by [CEL+DB18C6] composites are much higher than removal percentage values of individual CEL and DB18C6 composites. It seems that DB18C6 synergistically interact with CEL to form more stable complexes with heavy metals, and as a consequence, the [CEL+DB18C6] composite can adsorb relatively larger amount heavy metals. The adsorption parameters, such as pH, adsorbent dose, contact time, initial metal ion concentration and temperature were optimized. Desorption studies revealed that the regeneration of modified cellulose saturated with these metallic ions depends on the type and concentration of the regenerating solution (NH 4 Cl, HNO 3 , NaCl and CaCl 2 ). Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Comparison of molecular mechanics-Poisson-Boltzmann surface area (MM-PBSA) and molecular mechanics-three-dimensional reference interaction site model (MM-3D-RISM) method to calculate the binding free energy of protein-ligand complexes: Effect of metal ion and advance statistical test

    Science.gov (United States)

    Pandey, Preeti; Srivastava, Rakesh; Bandyopadhyay, Pradipta

    2018-03-01

    The relative performance of MM-PBSA and MM-3D-RISM methods to estimate the binding free energy of protein-ligand complexes is investigated by applying these to three proteins (Dihydrofolate Reductase, Catechol-O-methyltransferase, and Stromelysin-1) differing in the number of metal ions they contain. None of the computational methods could distinguish all the ligands based on their calculated binding free energies (as compared to experimental values). The difference between the two comes from both polar and non-polar part of solvation. For charged ligand case, MM-PBSA and MM-3D-RISM give a qualitatively different result for the polar part of solvation.

  7. Cementation of silver ions on metallic copper

    International Nuclear Information System (INIS)

    Jaskula, M.

    2009-01-01

    The silver cementation on metallic copper was investigated in the presence or absence of oxygen. The influence of sulphuric acid and copper sulphate concentration on the silver cement morphology was studied in details, and results were linked with the previously determined kinetics data of the process. The morpgology of silver depopsit was found to be independent of the prosence of oxygen in the system in as well as the sulphuric acide concentration. Contrary, the concentration of copper sulphate strongly influenced the morphology of silver deposite. Two-stage mechanism of cementation was proposed. (authors).

  8. Selective removal of heavy metal ions by disulfide linked polymer networks

    DEFF Research Database (Denmark)

    Ko, Dongah; Sung Lee, Joo; Patel, Hasmukh A.

    2017-01-01

    Heavy metal contaminated surface water is one of the oldest pollution problems, which is critical to ecosystems and human health. We devised disulfide linked polymer networks and employed as a sorbent for removing heavy metal ions from contaminated water. Although the polymer network material has...... a moderate surface area, it demonstrated cadmium removal efficiency equivalent to highly porous activated carbon while it showed 16 times faster sorption kinetics compared to activated carbon, owing to the high affinity of cadmium towards disulfide and thiol functionality in the polymer network. The metal...... sorption mechanism on polymer network was studied by sorption kinetics, effect of pH, and metal complexation. We observed that the metal ions―copper, cadmium, and zinc showed high binding affinity in polymer network, even in the presence of competing cations like calcium in water....

  9. Very broad beam metal ion source for large area ion implantation application

    International Nuclear Information System (INIS)

    Brown, I.; Anders, S.; Dickinson, M.R.; MacGill, R.A.; Yao, X.

    1993-01-01

    The authors have made and operated a very broad beam version of vacuum arc ion source and used it to carry out high energy metal ion implantation of a particularly large substrate. A multiple-cathode vacuum arc plasma source was coupled to a 50 cm diameter beam extractor (multiple aperture, accel-decel configuration) operated at a net extraction voltage of up to 50 kV. The metal ion species chosen were Ni and Ta. The mean ion charge state for Ni and Ta vacuum arc plasmas is 1.8 and 2.9, respectively, and so the mean ion energies were up to about 90 and 145 keV, respectively. The ion source was operated in a repetitively pulsed mode with pulse length 250 μs and repetition rate several pulses per second. The extracted beam had a gaussian profile with FWHM about 35 cm, giving a nominal beam area of about 1,000 cm 2 . The current of Ni or Ta metal ions in the beam was up to several amperes. The targets for the ion implantation were a number of 24-inch long, highly polished Cu rails from an electromagnetic rail gun. The rails were located about 80 cm away from the ion source extractor grids, and were moved across a diameter of the vessel in such a way as to maximize the uniformity of the implant along the rail. The saturation retained dose for Ta was limited to about 4 x 10 16 cm -2 because of the rather severe sputtering, in accordance with the theoretical expectations for these implantation conditions. Here they describe the ion source, the implantation procedure, and the kinds of implants that can be produced in this way

  10. Modification of medical metals by ion implantation of copper

    Science.gov (United States)

    Wan, Y. Z.; Xiong, G. Y.; Liang, H.; Raman, S.; He, F.; Huang, Y.

    2007-10-01

    The effect of copper ion implantation on the antibacterial activity, wear performance and corrosion resistance of medical metals including 317 L of stainless steels, pure titanium, and Ti-Al-Nb alloy was studied in this work. The specimens were implanted with copper ions using a MEVVA source ion implanter with ion doses ranging from 0.5 × 10 17 to 4 × 10 17 ions/cm 2 at an energy of 80 keV. The antibacterial effect, wear rate, and inflexion potential were measured as a function of ion dose. The results obtained indicate that copper ion implantation improves the antibacterial effect and wear behaviour for all the three medical materials studied. However, corrosion resistance decreases after ion implantation of copper. Experimental results indicate that the antibacterial property and corrosion resistance should be balanced for medical titanium materials. The marked deteriorated corrosion resistance of 317 L suggests that copper implantation may not be an effective method of improving its antibacterial activity.

  11. Method for removing metal ions from solution with titanate sorbents

    Science.gov (United States)

    Lundquist, Susan H.; White, Lloyd R.

    1999-01-01

    A method for removing metal ions from solution comprises the steps of providing titanate particles by spray-drying a solution or slurry comprising sorbent titanates having a particle size up to 20 micrometers, optionally in the presence of polymer free of cellulose functionality as binder, said sorbent being active towards heavy metals from Periodic Table (CAS version) Groups IA, IIA, IB, IIB, IIIB, and VIII, to provide monodisperse, substantially spherical particles in a yield of at least 70 percent of theoretical yield and having a particle size distribution in the range of 1 to 500 micrometers. The particles can be used free flowing in columns or beds, or entrapped in a nonwoven, fibrous web or matrix or a cast porous membrane, to selectively remove metal ions from aqueous or organic liquid.

  12. Electron spin resonance of radicals and metal complexes

    International Nuclear Information System (INIS)

    1993-01-01

    The materials are a collection of extended synopsis of papers presented at the conference sessions. The broad area of magnetic techniques applications has been described as well as their spectra interpretation methods. The ESR, NMR, ENDOR and spin echo were applied for studying the radiation and UV induced radicals in chemical and biological systems. Also in the study of complexes of metallic ions (having the paramagnetic properties) and their interaction with the matrix, the magnetic techniques has been commonly used. They are also very convenient tool for the study of reaction kinetics and mechanism as well as interaction of paramagnetic species with themselves and crystal lattice or with the surface as for thee catalytic processes

  13. Ion spectra of the metal vapor vacuum arc ion source with compound and alloy cathodes

    Science.gov (United States)

    Sasaki, Jun; Brown, Ian G.

    1990-01-01

    In metal vapor vacuum arc (MEVVA) ion sources, vacuum arc plasma with cathodes of single, pure elements has been utilized for the production of metal ions. In this study, we have investigated the charge state distributions of ions produced in vacuum arc plasmas in a MEVVA ion source for the case when the cathode is an alloy or a compound material. The ion charge state spectra were analyzed by means of a time-of-flight apparatus. We have compared the ion spectra for a cathode of an alloy or a compound material with its constituent elements: TiC/TiN/TiO2/Ti/C, SiC/Si/C, WC/W/C U/UN/(UN-ZrC)/Zr/C, and brass/Zn/Cu. We find that the MEVVA produces ions of all constituent elements in the compound and the alloy cathodes. The charge state distribution of each element differs, however, from the charge state distribution obtained in the vacuum arc with a cathode made of the pure, single constituent element. Fractional values of the total ion numbers of each constituent element in the extracted beam depart from the stoichiometry of the elements in the cathode material. In an operation with a TiC cathode, we irradiated a 304 stainless-steel plate with the extracted beam. Results from glow-discharge spectroscopy (GDS) of the surface show that both titanium and carbon are implanted in the substrate after the irradiation.

  14. Preparation and properties of chitosan-metal complex: Some factors influencing the adsorption capacity for dyes in aqueous solution.

    Science.gov (United States)

    Rashid, Sadia; Shen, Chensi; Yang, Jing; Liu, Jianshe; Li, Jing

    2018-04-01

    Chitosan-metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to be further studied. Thus, this study investigates the factors affecting the adsorption ability of chitosan-metal complex adsorbents, including various kinds of metal centers, different metal salts and crosslinking degree. The results show that the chitosan-Fe(III) complex prepared by sulfate salts exhibited the best adsorption efficiency (100%) for various dyes in very short time duration (10min), and its maximum adsorption capacity achieved 349.22mg/g. The anion of the metal salt which was used in preparation played an important role to enhance the adsorption ability of chitosan-metal complex. SO 4 2- ions not only had the effect of crosslinking through electrostatic interaction with amine group of chitosan polymer, but also could facilitate the chelation of metal ions with chitosan polymer during the synthesis process. Additionally, the pH sensitivity and the sensitivity of ionic environment for chitosan-metal complex were analyzed. We hope that these factors affecting the adsorption of the chitosan-metal complex can help not only in optimizing its use but also in designing new chitosan-metal based complexes. Copyright © 2017. Published by Elsevier B.V.

  15. Metal ion levels and lymphocyte counts

    DEFF Research Database (Denmark)

    Penny, Jeannette Ø; Varmarken, Jens-Erik; Ovesen, Ole

    2013-01-01

    . RESULTS: The T-lymphocyte counts for both implant types declined over the 2-year period. This decline was statistically significant for CD3(+)CD8(+) in the THA group, with a regression coefficient of -0.04 × 10(9)cells/year (95% CI: -0.08 to -0.01). Regression analysis indicated a depressive effect...... of cobalt ions in particular on T-cells with 2-year whole-blood cobalt regression coefficients for CD3+ of -0.10 (95% CI: -0.16 to -0.04) × 10(9) cells/parts per billion (ppb), for CD3+CD4+ of -0.06 (-0.09 to -0.03) × 10(9) cells/ppb, and for CD3(+)CD8(+) of -0.02 (-0.03 to -0.00) × 10(9) cells...

  16. Four new metal complexes with the amino acid deoxyalliin

    Energy Technology Data Exchange (ETDEWEB)

    Massabni, Antonio C.; Corbi, Pedro P. [UNESP, Araraquara, SP (Brazil). Inst. de Quimica]. E-mail: massabni@iq.unesp.br; Melnikov, Petr [Universidade Federal do Mato Grosso do Sul, Campo Grande, MS (Brazil). Centro de Ciencias Exatas e Tecnologia; Zacharias, Marisa A. [Instituto Nacional de Pesquisas Espaciais (INPE), Cachoeira Paulista, SP (Brazil); Rechenberg, Hercilio R. [Sao Paulo Univ., SP (Brazil). Inst. de Fisica

    2005-07-15

    The solid complexes [Co(C{sub 6}H{sub 10}NO{sub 2}S){sub 2}], [Ni(C{sub 6}H{sub 10}NO{sub 2}S){sub 2}], [Cu(C{sub 6}H{sub 1})0NO{sub 2}S){sub 2}] and [Fe(C{sub 6}H{sub 10}NO{sub 2}S){sub 2}] were obtained from the reaction of cobalt(II), nickel(II), copper(II) and iron(II) salts with the potassium salt of the amino acid deoxyalliin (S-allyl-L-cysteine). Electronic absorption spectra of the complexes are typical of octahedral structures. Infrared spectroscopy confirms the ligand coordination to the metal ions through (COO{sup -}) and (NH{sub 2}) groups. EPR spectrum of the Cu(II) complex indicates a slight distortion of its octahedral symmetry. Moessbauer parameters permitted to identify the presence of iron(II) and iron(III) species in the same sample, both of octahedral geometry. Thermal decomposition of the complexes lead to the formation of CoO, NiO, CuO and Fe{sub 2}O{sub 3} as final products. The compounds show poor solubility in water and in the common organic solvents. (author)

  17. synthesis and characterisation of some metal complexes of hybrid

    African Journals Online (AJOL)

    a

    KEY WORDS: Aminophosphines, Metal complexes, Cobalt(II) complex, Crystal structure. INTRODUCTION. Transition metal complexes of tertiary phosphines have been extensively studied owing to the donor-acceptor properties of the phosphorus atom which provides enhanced coordination abilities of the ligands thus ...

  18. Comparison of metal ion concentrations and implant survival after total hip arthroplasty with metal-on-metal versus metal-on-polyethylene articulations

    OpenAIRE

    Dahlstrand, Henrik; Stark, André; Wick, Marius C; Anissian, Lucas; Hailer, Nils P; Weiss, Rüdiger J

    2017-01-01

    Background and purpose Large metal-on-metal (MoM) articulations are associated with metal wear and corrosion, leading to increased metal ion concentrations and unacceptable revision rates. There are few comparative studies of 28-mm MoM articulations with conventional metal-on-polyethylene (MoP) couplings. We present a long-term follow-up of a randomized controlled trial comparing MoM versus MoP 28-mm articulations, focused on metal ions and implant survival. Patients and methods 85 patients w...

  19. Synthesis, Characterization and Metal Ion Detection of Novel Fluoroionophores Based on Heterocyclic Substituted Alanines

    Science.gov (United States)

    Costa, Susana P. G.; Oliveira, Elisabete; Lodeiro, Carlos; Raposo, M. Manuela M.

    2007-01-01

    The synthesis of new fluorescent probes containing the thiophene and benzoxazole moieties combined with an alanine residue is described. The resulting highly fluorescent heterocyclic alanine derivatives respond via a quenching effect, with paramagnetic Cu(II) and Ni(II) metal ions and with diamagnetic Hg(II), as shown by the absorption and steady-state fluorescence spectroscopy studies. The formation of mononuclear or dinuclear metal complexes was postulated based on the presence of the free carboxylic acid as binding site and also with the interaction with the donor atoms in the chromophore. Interaction with other important biological metal ions such as Zn(II), Ca(II) and Na(I) was also explored. PMID:28903216

  20. Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent.

    Science.gov (United States)

    Jo, Se-Hee; Park, Chanhun; Yi, Sung Chul; Kim, Dukjoon; Mun, Sungyong

    2011-08-19

    A three-zone carousel process, in which Cu(II)-imprinted polymer (Cu-MIP) and a buffer solution were employed as adsorbent and eluent respectively, has been developed previously for continuous separation of Cu²⁺ (product) from Mn²⁺ and Co²⁺ (impurities). Although this process was reported to be successful in the aforementioned separation task, the way of using a buffer solution as eluent made it inevitable that the product stream included the buffer-related metal ions (i.e., the constituent metal ions of the buffer solution) as well as copper ions. For a more perfect recovery of copper ions, it would be necessary to improve the previous carousel process such that it can remove the buffer-related metal ions from copper ions while maintaining the previous function of separating copper ions from the other 2 impure heavy-metal ions. This improvement was made in this study by proposing a four-zone carousel process based on the following strategy: (1) the addition of one more zone for performing the two-step re-equilibration tasks and (2) the use of water as the eluent of the washing step in the separation zone. The operating conditions of such a proposed process were determined on the basis of the data from a series of single-column experiments. Under the determined operating conditions, 3 runs of carousel experiments were carried out. The results of these experiments revealed that the feed-loading time was a key parameter affecting the performance of the proposed process. Consequently, the continuous separation of copper ions from both the impure heavy-metal ions and the buffer-related metal ions could be achieved with a purity of 91.9% and a yield of 92.8% by using the proposed carousel process based on a properly chosen feed-loading time. Copyright © 2011 Elsevier B.V. All rights reserved.

  1. Kinetic study of heavy metal ions removal by ion exchange in batch conical air spouted bed

    Directory of Open Access Journals (Sweden)

    T.M. Zewail

    2015-03-01

    Full Text Available Spouted bed contactor is a hybrid of fixed and fluidized bed contactors, which retains the advantages of each with good hydrodynamic conditions. The aim of the present study is to investigate the performance of a batch conical air spouted vessel for heavy metal removal by strong cation exchange resins (AMBERJET 1200 Na. The effect of various parameters such as type of heavy metal ions (Ni+2 and Pb+2, contact time, superficial air velocity and initial heavy metal ion concentration on % heavy metal ion removal has been investigated. It has been found that under optimum conditions 98% and 99% removal of Ni+2 and Pb+2 were achieved respectively. Several kinetic models were used to test the experimental data and to examine the controlling mechanism of the sorption process. The present results of Ni+2 and Pb+2 well fit pseudo second order kinetic model with a high correlation coefficient. Both film diffusion and intra-particle diffusion contribute to the ion exchange process. The present study revealed that spouted bed vessel may provide an effective alternative for conducting ion exchange reactions.

  2. Ion conducting polymers and polymer blends for alkali metal ion batteries

    Science.gov (United States)

    DeSimone, Joseph M.; Pandya, Ashish; Wong, Dominica; Vitale, Alessandra

    2017-08-29

    Electrolyte compositions for batteries such as lithium ion and lithium air batteries are described. In some embodiments the compositions are liquid compositions comprising (a) a homogeneous solvent system, said solvent system comprising a perfluropolyether (PFPE) and polyethylene oxide (PEO); and (b) an alkali metal salt dissolved in said solvent system. In other embodiments the compositions are solid electrolyte compositions comprising: (a) a solid polymer, said polymer comprising a crosslinked product of a crosslinkable perfluropolyether (PFPE) and a crosslinkable polyethylene oxide (PEO); and (b) an alkali metal ion salt dissolved in said polymer. Batteries containing such compositions as electrolytes are also described.

  3. In vitro cytotoxicity of metallic ions released from dental alloys.

    Science.gov (United States)

    Milheiro, Ana; Nozaki, Kosuke; Kleverlaan, Cornelis J; Muris, Joris; Miura, Hiroyuki; Feilzer, Albert J

    2016-05-01

    The cytotoxicity of a dental alloy depends on, but is not limited to, the extent of its corrosion behavior. Individual ions may have effects on cell viability that are different from metals interacting within the alloy structure. We aimed to investigate the cytotoxicity of individual metal ions in concentrations similar to those reported to be released from Pd-based dental alloys on mouse fibroblast cells. Metal salts were used to prepare seven solutions (concentration range 100 ppm-1 ppb) of the transition metals, such as Ni(II), Pd(II), Cu(II), and Ag(I), and the metals, such as Ga(III), In(III), and Sn(II). Cytotoxicity on mouse fibroblasts L929 was evaluated using the MTT assay. Ni, Cu, and Ag are cytotoxic at 10 ppm, Pd and Ga at 100 ppm. Sn and In were not able to induce cytotoxicity at the tested concentrations. Transition metals were able to induce cytotoxic effects in concentrations similar to those reported to be released from Pd-based dental alloys. Ni, Cu, and Ag were the most cytotoxic followed by Pd and Ga; Sn and In were not cytotoxic. Cytotoxic reactions might be considered in the etiopathogenesis of clinically observed local adverse reactions.

  4. Adsorptive Removal of Metal Ions from Water using Functionalized Biomaterials.

    Science.gov (United States)

    Deshpande, Kanchanmala

    2017-01-01

    Synthesis and modification of cost-effective sorbents for removing heavy metals from water resources is an area of significance. It had been reported that materials with biological origins, such as agricultural and animal waste, are excellent alternatives to conventional adsorbents due to their higher affinity, capacity and selectivity towards metal ions. These properties of biomaterials help to reduce or detoxify metal ions concentration in contaminated water to acceptable regulatory standards. Synthesis of novel, efficient, cost effective, eco-friendly biomaterials for heavy metal adsorption from water is still an area of challenge. In this comprehensive review, acompilation of patents as well as published articles is carried out to outline the properties of different biomaterials based on their precursors along withdetailed description of biomaterial morphology and various surface modification approaches. A detailed study of the performance of adsorbents and the role of physical and chemical modification in terms of enhancing their potential for metal adsorption from water is compiled here. The factors affecting adsorption behavior i.e., capacity and affinity of e biomaterials is also compiled. This paper presents a concise review of reported studies on the synthesis and modification of biomaterials, their use for heavy metal removal from waters and future prospects of this technology. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  5. Liquid metal alloy ion sources—An alternative for focussed ion beam technology

    International Nuclear Information System (INIS)

    Bischoff, Lothar; Mazarov, Paul; Bruchhaus, Lars; Gierak, Jacques

    2016-01-01

    Today, Focused Ion Beam (FIB) processing is nearly exclusively based on gallium Liquid Metal Ion Sources (LMIS). But, many applications in the μm- or nm range could benefit from ion species other than gallium: local ion implantation, ion beam mixing, ion beam synthesis, or Focused Ion Beam Lithography (IBL). Therefore, Liquid Metal Alloy Ion Sources (LMAIS) represent a promising alternative to expand the remarkable application fields for FIB. Especially, the IBL process shows potential advantages over, e.g., electron beam or other lithography techniques: direct, resistless, and three-dimensional patterning, enabling a simultaneous in-situ process control by cross-sectioning and inspection. Taking additionally into account that the used ion species influences significantly the physical and chemical nature of the resulting nanostructures—in particular, the electrical, optical, magnetic, and mechanic properties leading to a large potential application area which can be tuned by choosing a well suited LMAIS. Nearly half of the elements of the periodic table are recently available in the FIB technology as a result of continuous research in this area during the last forty years. Key features of a LMAIS are long life-time, high brightness, and stable ion current. Recent developments could make these sources feasible for nano patterning issues as an alternative technology more in research than in industry. The authors will review existing LMAIS, LMIS other than Ga, and binary and ternary alloys. These physical properties as well as the fabrication technology and prospective domains for modern FIB applications will similarly be reviewed. Other emerging ion sources will be also presented and their performances discussed.

  6. Infrared Multiple-Photon Dissociation spectroscopy of group II metal complexes with salicylate

    Energy Technology Data Exchange (ETDEWEB)

    Ryan P. Dain; Gary Gresham; Gary S. Groenewold; Jeffrey D. Steill; Jos Oomens; Michael J. van Stipdonk

    2011-07-01

    Ion-trap tandem mass spectrometry with collision-induced dissociation, and the combination of infrared multiple-photon dissociation (IRMPD) spectroscopy and density functional theory (DFT) calculations were used to characterize singly-charged, 1:1 complexes of Ca2+, Sr2+ and Ba2+ with salicylate. For each metal-salicylate complex, the CID pathways are: (a) elimination of CO2 and (b) formation of [MOH]+ where M=Ca2+, Sr2+ or Ba2+. DFT calculations predict three minima for the cation-salicylate complexes which differ in the mode of metal binding. In the first, the metal ion is coordinated by O atoms of the (neutral) phenol and carboxylate groups of salicylate. In the second, the cation is coordinated by phenoxide and (neutral) carboxylic acid groups. The third mode involves coordination by the carboxylate group alone. The infrared spectrum for the metal-salicylate complexes contains a number of absorptions between 1000 – 1650 cm-1, and the best correlation between theoretical and experimental spectra for the structure that features coordination of the metal ion by phenoxide and the carbonyl group of the carboxylic acid group, consistent with calculated energies for the respective species.

  7. Ion beam mixing isotopic metal bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Fell, C.J. [Newcastle Univ., NSW (Australia). Dept. of Physics; Kenny, M.J. [CSIRO, Lindfield, NSW (Australia). Div. of Applied Physics

    1993-12-31

    In order to obtain an insight into the mechanisms of ion-solid interactions, bilayer targets can be prepared from two different isotopes. A mixing study SIMS is to be carried out using specially grown monocrystalline bilayers of {sup 58}Ni / {sup 60}Ni. An important aspect of the work is the preparation of high quality single-crystal thin films. The Ni layers will be grown on the (110) surface of pure Ni and verified for crystallinity using Reflection High-Energy Electron Diffraction and Rutherford Backscattering channelling analysis. The Pd bilayers will be grown on a Pd (100) surface. RHEED will be used to confirm the two-dimensional crystallinity of the surface before and after deposition of each layer, and channelling used to confirm bulk film crystallinity. Single crystal substrates are currently being prepared. Analysis of the Ni (110) surface using RHEED at 9 kV shows a streak spacing which corresponds to a lattice spacing of 2.47 {+-} 0.09 Angstroms. 9 refs., 1 fig.

  8. Metal ion-mediated agonism and agonist enhancement in melanocortin MC1 and MC4 receptors

    DEFF Research Database (Denmark)

    Holst, Birgitte; Elling, Christian E; Schwartz, Thue W

    2002-01-01

    all MC receptors, are parts of the site. It is concluded that the function of the MC1 and MC4 receptors can be positively modulated by metal ions acting both as partial agonists and as potentiators for other agonists, including the endogenous peptide ligand alpha-MSH at Zn(II) concentrations......An endogenous metal-ion site in the melanocortin MC1 and MC4 receptors was characterized mainly in transiently transfected COS-7 cells. ZnCl(2) alone stimulated signaling through the Gs pathway with a potency of 11 and 13 microm and an efficacy of 50 and 20% of that of alpha...... of the metal ion appeared to be additive, because the maximal cAMP response for alpha-MSH in the presence of Zn(II) was 60% above the maximal response for the peptide alone. The affinity of Zn(II) could be increased through binding of the metal ion in complex with small hydrophobic chelators. The binding...

  9. Reaction of Non-Symmetric Schiff Base Metallo-Ligand Complexes Possessing an Oxime Function with Ln Ions

    Directory of Open Access Journals (Sweden)

    Jean-Pierre Costes

    2018-03-01

    Full Text Available The preparation of non-symmetric Schiff base ligands possessing one oxime function that is associated to a second function such as pyrrole or phenol function is first described. These ligands, which possess inner N4 or N3O coordination sites, allow formation of cationic or neutral non-symmetric CuII or NiII metallo-ligand complexes under their mono- or di-deprotonated forms. In presence of Lanthanide ions the neutral complexes do not coordinate to the LnIII ions, the oxygen atom of the oxime function being only hydrogen-bonded to a water molecule that is linked to the LnIII ion. This surprising behavior allows for the isolation of LnIII ions by non-interacting metal complexes. Reaction of cationic NiII complexes possessing a protonated oxime function with LnIII ions leads to the formation of original and dianionic (Gd(NO352− entities that are well separated from each other. This work highlights the preparation of well isolated mononuclear LnIII entities into a matrix of diamagnetic metal complexes. These new complexes complete our previous work dealing with the complexing ability of the oxime function toward Lanthanide ions. It could open the way to the synthesis of new entities with interesting properties, such as single-ion magnets for example.

  10. Enhancing glycan isomer separations with metal ions and positive and negative polarity ion mobility spectrometry-mass spectrometry analyses

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Xueyun; Zhang, Xing; Schocker, Nate; Renslow, Ryan S.; Orton, Daniel J.; Khamsi, Jamal; Ashmus, Roger A.; Almeida, Igor C.; Tang, Keqi; Costello, Catherine E; Smith, Richard D.; Michael, Katja; Baker, Erin M.

    2016-09-07

    Glycomics has become an increasingly important field of research since glycans play critical roles in biology processes ranging from molecular recognition and signaling to cellular communication. Glycans often conjugate with other biomolecules such as proteins and lipids, and alter their properties and functions, so understanding the effect glycans have on cellular systems is essential. However the analysis of glycans is extremely difficult due to their complexity and structural diversity (i.e., the number and identity of monomer units, and configuration of their glycosidic linkages and connectivities). In this work, we coupled ion mobility spectrometry with mass spectrometry (IMS-MS) to characterize glycan standards and biologically important isomers of synthetic αGal-containing O-glycans including glycotopes of the protozoan parasite Trypanosoma cruzi, which is the causative agent of Chagas disease. IMS-MS results showed significant differences for the glycan structural isomers when analyzed in positive and negative polarity and complexed with different metal cations. These results suggest specific metal ions or ion polarities could be used to target and baseline separate glycan isomers of interest with IMS-MS.

  11. Alkali metal complexes of 6-methyl-2-pyridone: simple formulae, but not so simple structures.

    Science.gov (United States)

    Clegg, William; Tooke, Duncan M

    2013-12-01

    Reaction of 6-methyl-2-pyridone (Hmhp) with Na or K metal, or with Rb or Cs 2-ethylhexoxide, in an appropriate single or mixed solvent, yields a series of solvated polymeric complexes with the empirical formulae M(mhp)(H2O)2 [(1), M = Na; (2), M = K], M(mhp)(H2O) [(3), M = Rb; (4), M = Cs] and Cs(mhp)(ROH) [(5), R = Me; (6), R = Et]. All of the products have been crystallographically characterized and show sheet polymeric structures, except for a double-chain structure for (2). In all of the structures, mhp(-) and solvent molecules function as bridging ligands; two metal ions are bridged (μ2) by each solvent molecule in (1), (5) and (6), while (2) contains both μ2 and μ3 triple bridges, and (3) and (4) display highly unusual μ4 quadruple bridging of metal ions by water molecules. The pyridonate O atom bridges two or three metal ions in each case. Nitrogen is also involved in coordination to the heavier metals; it bonds to a single ion in (3) and (4), but has an almost unprecedented bridging role in (5) and (6). As a result of the extensive bridging by ligands, coordination numbers between 6 and 8 are achieved for the metal ions. In each structure, all solvent OH groups form hydrogen bonds to pyridonate O and, in some cases, N atoms. With one exception, these are the first reported pyridonate complexes of the alkali metals Na-Cs that do not also include transition metals.

  12. Removal of heavy metal ions from wastewaters using dendrimer-functionalized multi-walled carbon nanotubes.

    Science.gov (United States)

    Iannazzo, Daniela; Pistone, Alessandro; Ziccarelli, Ida; Espro, Claudia; Galvagno, Signorino; Giofré, Salvatore V; Romeo, Roberto; Cicero, Nicola; Bua, Giuseppe D; Lanza, Giuseppe; Legnani, Laura; Chiacchio, Maria A

    2017-06-01

    Dendrimer-functionalized multi-walled carbon nanotubes (MWCNT) for heavy metal ion removal from wastewaters were developed. Triazole dendrimers (TD) were built directly onto the carbon nanotube surface by successive click chemistry reactions affording the zero- and first-generation dendrimer-functionalized MWCNT (MWCNT-TD1 and MWCNT-TD2). The Moedritzer-Irani reaction carried out on the amino groups present on the MWCNT-TD2 sample gave the corresponding α-aminophosphonate nanosystem MWCNT-TD2P. Both MWCNT-TD2 and MWCNT-TD2P nanosystems have been characterized by physical, chemical, and morphological analyses. Their chelating abilities towards the toxic metal ions Pb 2+ , Hg 2+ , and Ni 2+ and the harmless Ca 2+ ion have been experimentally evaluated in the two different sets of experiments and at the salt concentrations of 1 mg/mL or 1 μg/mL by inductively coupled plasma mass spectrometry (ICP-MS). The results of these studies pointed out the interesting chelating behavior for the phosphonated nanosystem towards the Hg 2+ ion. The complexation mode of the best chelating system MWCNT-TD2P with mercury was investigated through density functional theory (DFT) calculations, suggesting a chelation mechanism involving the two oxygen atoms of the phosphate group. The synthesized dendrimers, supported on the multi-walled carbon nanotubes, have shown the potential to be used for the selective toxic metal ion removal and recovery.

  13. Investigation of metal ion extraction and aggregate formation combining acidic and neutral organophosphorous reagents

    Energy Technology Data Exchange (ETDEWEB)

    Braatz, A.D.; Nilsson, M. [Department of Chemical Engineering and Materials Science, 916 Engineering Tower, University of California-Irvine, Irvine, CA 92697-2575 (United States); Ellis, R.; Antonio, M. [Chemical Science and Engineering Division, Argonne National Laboratory, Building 200 9700 South Cass Ave, Argonne, IL 60439-4831 (United States)

    2013-07-01

    In the present study, we investigate how varying mixtures of tri-n-butyl phosphate (TBP) and dibutyl phosphate (HDBP) results in enhanced extraction of lanthanum(III), La{sup 3+}, and dysprosium(III), Dy{sup 3+}. Water and metal ion extraction were carefully monitored as a function of TBP:HDBP mole ratio.In addition to these techniques, EXAFS was used to determine the coordination environment of the metal ion in this system. To produce the necessary signal, a concentration of 1.25*10{sup -3} M La{sup 3+} and Dy{sup 3+} was used. Although previous studies of synergistic extraction of metal cations using combinations of neutral and acidic reagents explain the enhanced extraction by increased dehydration of the metal ion and the formation of mixed extractant complexes, our evidence for the increased water extraction coupled with the aggregate formation suggests a reverse micellar aspect to synergism in the system containing TBP and HDBP. It is quite possible that both of these phenomena contribute to our system behavior. The EXAFS data shows that, based on coordination numbers alone, several possible structures may exist. From this study, we cannot provide a definitive answer as to the nature of extraction in this system or the exact complex formed during extraction.

  14. Clean and efficient extraction of copper ions and deposition as metal

    OpenAIRE

    Elsentriecy, Hassan H.; Jalbout, Abraham F.; Gervasio, Dominic F.

    2015-01-01

    A simple, clean and efficient one-pot process is offered as an alternative to the conventional complex processing presently used to extract copper ions from copper containing materials, like copper concentrate or slag, and to form copper metal. The alternative process uses a eutectic molten salt of potassium chloride, sodium chloride and zinc chloride as the reaction fluid which is recyclable, low in cost, environmentally benign, low melting (melting point 204°), high boiling (vapor pressure ...

  15. Metal ion coordination inR'andT'state hybrid hemoglobins as ...

    Indian Academy of Sciences (India)

    EPR examinations of these hybrids show that both in 4R state-[Cu(II)-Fe(II)] and state-[Cu(II)-Ni(II)] hybrids at neutral pH and in the absence of IHP, CuPPIX, irrespective of the subunit in which it is present, has a mixed-metal ion environment: Species 1, a five-coordinated Cu2+ complex with strong proximal histidine bond ...

  16. Colorimetric determination of the fluoride ion - application to uranium metal and to uranous fluoride

    International Nuclear Information System (INIS)

    Hering, H.; Hure, J.; Legrand, S.

    1949-12-01

    In the determination described for fluoride in U metal, the U is brought into H 2 SO 4 solution by anodic oxidation, the fluo-silicic acid is distilled by entrainment in water vapor, and the F ion is determined in the distillate by using the fact that it complexes Zr and thus prevents the formation of the Zr-alizarin S lake. For F ion in UF 4 , the compound is dissolved in a Na 2 CO 3 -H 2 O 2 mixture, and F is determined in the solution by the colorimetric method described. (author)

  17. Architectural design criteria for f-block metal ion sequestering agents. 1998 annual progress report

    International Nuclear Information System (INIS)

    Dixon, D.A.; Hay, B.P.; Paine, R.T.; Raymond, K.N.; Rogers, R.D.; Roundhill, D.M.

    1998-01-01

    'The objective of this project is to provide a means to optimize ligand architecture for f-block metal recognition. The authors strategy builds on an innovative and successful molecular modeling approach in developing polyether ligand design criteria for the alkali and alkaline earth cations. The hypothesis underlying this proposal is that differences in metal ion binding with multidentate ligands bearing the same number and type of donor groups are primarily attributable to intramolecular steric factors. They propose quantifying these steric factors through the application of molecular mechanics models. The research involves close integration of theoretical and experimental chemistry. The experimental work entails synthesizing novel ligands and experimentally determining structures and binding constants for metal ion complexation by series of ligands in which architecture is systematically varied. The theoretical work entails using electronic structure calculations to parameterize a molecular mechanics force field for a range of metal ions and ligand types. The resulting molecular mechanics force field will be used to predict low energy structures for unidentate, bidentate, and multidentate ligands and their metal complexes through conformational searches. Results will be analyzed to assess the relative importance of several steric factors including optimal M-L length, optimal geometry at the metal center, optimal geometry at the donor atoms (complementarity), and conformation prior to binding (preorganization). An accurate set of criteria for the design of ligand architecture will be obtained from these results. These criteria will enable researchers to target ligand structures for synthesis and thereby dramatically reduce the time and cost associated with metal-specific ligand development.'

  18. Polymer filtration systems for dilute metal ion recovery

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.F.; Robison, T.W.; Jarvinen, G.D.

    1998-12-01

    Scientists at Los Alamos National Laboratory have developed a metal recovery system that meets the global treatment demands for all kinds of industrial and metal-processing streams. The Polymer Filtration (PF) System--a process that is easily operated and robust--offers metal-finishing businesses a convenient and inexpensive way to recover and recycle metal ions in-house, thus reducing materials costs, waste removal costs, and industrial liability. As a valuable economic and environmental asset, the PF System has been named a winner of a 1995 R and D 100 Award. These awards are presented annually by R and D Magazine to the one hundred most significant technical innovations of the year. The PF System is based on the use of water-soluble metal-binding polymers and on advanced ultrafiltration membranes. Customers for this technology will receive new soluble polymers, especially formulated for their waste stream, and the complete PF processing unit: a reaction reservoir, pumps, plumbing, controls, and the advanced ultrafiltration membranes, all in a skid mounted frame. Metal-bearing waste water is treated in the reaction reservoir, where the polymer binds with the metal ions under balanced acid/base conditions. The reservoir fluid is then pumped through the ultrafiltration system--a cartridge packed with ultrafiltration membranes shaped in hollow fibers. As the fluid travels inside the fiber, water and other small molecules--simple salts such as calcium and sodium, for example--pass through the porous membrane walls of the fibers and are discharged through the outlet as permeate. The polymer-bound metal, which is too large to pass through the pores, is both purified and concentrated inside the hollow fibers and is returned to the fluid reservoir for further waste water treatment.

  19. Electron emission during multicharged ion-metal surface interactions

    International Nuclear Information System (INIS)

    Zeijlmans van Emmichoven, P.A.; Havener, C.C.; Hughes, I.G.; Overbury, S.H.; Robinson, M.T.; Zehner, D.M.; Meyer, F.W.

    1992-01-01

    The electron emission during multicharged ion-metal surface interactions will be discussed. The interactions lead to the emission of a significant number of electrons. Most of these electrons have energies below 30 eV. For incident ions with innershell vacancies the emission of Auger electrons that fill these vacancies has been found to occur mainly below the surface. We will present recently measured electron energy distributions which will be used to discuss the mechanisms that lead to the emission of Auger and of low-energy electrons

  20. Wear properties of metal ion implanted 4140 steel

    International Nuclear Information System (INIS)

    Evans, P.J.; Paoloni, F.J.

    1994-01-01

    AISI type 4140 (high tensile) steel has been implanted with tungsten and titanium using a metal vapour vacuum arc ion source. Doses in the range (1-5)x10 16 ionscm -2 were implanted to a depth of approximately 30nm. The relative wear resistance between non-implanted and implanted specimens has been estimated using pin-on-disc and abrasive wear tests. Implantation of titanium decreased the area of wear tracks by a factor of 5 over unimplanted steel. In some cases the steel was also hardened by a liquid carburization treatment before implantation. Abrasion tests revealed a further improvement in wear resistance on this material following ion irradiation. ((orig.))

  1. Development of carbon and metallic nano particle composite materials for the determination of uranium and other heavy metal ions

    International Nuclear Information System (INIS)

    Sahoo, S.; Dey, M.K.; Satpati, A.K.; Reddy, A.V.R.

    2014-01-01

    Carbon and metallic nano particle based composite materials were developed and characterised for the determination of heavy metal ions and uranium in trace concentration levels. Composite material were electrodeposited on the substrate electrode and applied for the electrochemical determination of metal ions. Electrodeposition parameters to synthesise the composite material and the analytical parameters for determination were optimised. (author)

  2. Metal ion toxins and brain aquaporin-4 expression: an overview

    Directory of Open Access Journals (Sweden)

    Adriana eXimenes-Da-Silva

    2016-06-01

    Full Text Available Metal ions such as iron, zinc, and manganese are essential to metabolic functions, protein synthesis, neurotransmission, and antioxidant neuroprotective mechanisms. Conversely, non-essential metals such as mercury and lead are sources of human intoxication due to occupational activities or environmental contamination. Essential or non-essential metal accumulation in the central nervous system (CNS results in changes in blood-brain barrier (BBB permeability, as well as triggering microglia activation and astrocyte reactivity and changing water transport through the cells, which could result in brain swelling. Aquaporin-4 is the main water channel in the CNS, is expressed in astrocyte foot processes in brain capillaries and along the circumventricular epithelium in the ventricles, and has important physiological functions in maintaining brain osmotic homeostasis and supporting brain excitability through regulation of the extracellular space. Some evidence has pointed to a role of AQP4 during metal intoxication in the brain, where it may act in a dual form as a neuroprotector or a mediator of the development of oxidative stress in neurons and astrocytes, resulting in brain swelling and neuronal damage. This mini-review presents the way some metal ions affect changes in AQP4 expression in the CNS and discuss the ways in which water transport in brain cells can be involved in brain damage.

  3. Early Transition Metal Alkyl and Tetrahydroborate Complexes.

    Science.gov (United States)

    Jensen, James Allen

    1988-06-01

    An investigation of early transition metal alkyl and tetrahydroborate complexes as catalytic models and ceramic precursors has been initiated. The compounds MX _2 (dmpe)_2, dmpe = 1,2-bis(dimethylphosphino)ethane, for M = Ti, V, Cr, and X = Br, I, BH_4, have been prepared. These complexes are paramagnetic and have been shown by X-ray crystallography to have trans-octahedral structures. The BH_4^{-} groups in Ti(BH_4)_2(dmpe) _2 bond to the metal in a bidentate manner. This structure is in marked contrast to the structure of the vanadium analogue, V(BH_4)_2 (dmpe)_2, which displays two unidentate BH_4^{-} groups. Alkylation of Ti(BH_4)_2 (dmpe)_2 with LiMe results in the complex TiMe_2(dmpe) _2 which is diamagnetic in both solution and solid state. Single crystal X-ray and neutron diffraction studies show that there may be strong Ti-C pi -bonding. A tetragonal compression along the C -Ti-C bond vector accounts for the observed diamegnetism. A series of complexes of the formula Ti(BH _4)_3(PR_3)_2 has been prepared where PR_3 = PMe_3, PEt_3, PMe_3Ph, and P(OMe)_3 . The X-ray crystal structure of Ti(BH _4)_3(PMe_3)_2 reveals a pseudo trigonal bipyramidal geometry in which two BH_4^{-} groups display an unusual "side-on" bonding mode. The "side-on" ligation mode has been attributed to a Jahn-Teller distortion of the orbitally degenerate d^1 ground state. In contrast, the non-Jahn-Teller susceptible vanadium analogue, V(BH_4)_3 (PMe_3)_2, possesses a nearly ideal D_{rm 3h} >=ometry with three bidentate tetrahydroborate groups. Addition of excess PMe_3 to V(BH_4)_3(PMe _3)_2water forms the vanadium(III) oxo dimer (V(BH_4)_2 (PMe_3)_2]_2 [mu-O) which has been structurally characterized. The compound Ti(CH_2CMe _3)_4 can be prepared by addition of Ti(OEt)_4 to LiCH_2 CMe_3. Sublimation of Ti(CH _2CMe_3)_4 over a substrate heated to 250^ circC results in the chemical vapor deposition of amorphous TiC thin films. This CVD approach has been extended to the Group 4 borides: Ti

  4. The Corrosion Protection of Metals by Ion Vapor Deposited Aluminum

    Science.gov (United States)

    Danford, M. D.

    1993-01-01

    A study of the corrosion protection of substrate metals by ion vapor deposited aluminum (IVD Al) coats has been carried out. Corrosion protection by both anodized and unanodized IVD Al coats has been investigated. Base metals included in the study were 2219-T87 Al, 7075-T6 Al, Titanium-6 Al-4 Vanadium (Ti-6Al-4V), 4130 steel, D6AC steel, and 4340 steel. Results reveal that the anodized IVD Al coats provide excellent corrosion protection, but good protection is also achieved by IVD Al coats that have not been anodized.

  5. Selective extraction of metal ions with polymeric extractants by ion exchange/redox

    Science.gov (United States)

    Alexandratos, Spiro D.

    1987-01-01

    The specification discloses a method for the extraction of metal ions having a reduction potential of above about +0.3 from an aqueous solution. The method includes contacting the aqueous solution with a polymeric extractant having primary phosphinic acid groups, secondary phosphine oxide groups, or both phosphinic acid and phosphine oxide groups.

  6. Kinetic modeling of metal ion transport for desorption of Pb(II) ion ...

    African Journals Online (AJOL)

    The kinetics of desorption of lead (II) ion from metal loaded adsorbent of mercaptoacetic acid modified and unmodified oil palm (Elaeis guineensis) fruit fiber was studied using different solutions, at different contact times. At the end of 25 minutes, 79.19%, 75.99%, 57.14%, 50.56% and 32.72% of Pb2+ were desorbed using ...

  7. Gas phase hydrogen/deuterium exchange of arginine and arginine dipeptides complexed with alkali metals.

    Science.gov (United States)

    Mertens, Laura A; Marzluff, Elaine M

    2011-08-25

    The hydrogen/deuterium (H/D) exchange of protonated and alkali-metal cationized Arg-Gly and Gly-Arg peptides with D(2)O in the gas phase was studied using electrospray ionization quadropole ion trap mass spectrometry. The Arg-Gly and Gly-Arg alkali metal complexes exchange significantly more hydrogens than protonated Arg-Gly and Gly-Arg. We propose a mechanism where the peptide shifts between a zwitterionic salt bridge and nonzwitterionic charge solvated conformations. The increased rate of H/D exchange of the alkali metal complexes is attributed to the peptide metal complexes' small energy difference between the salt-bridge conformation and the nonzwitterionic charge-solvated conformation. Implications for the applicability of this mechanism to other zwitterionic systems are discussed. © 2011 American Chemical Society

  8. Influence of activated carbon surface acidity on adsorption of heavy metal ions and aromatics from aqueous solution

    International Nuclear Information System (INIS)

    Sato, Sanae; Yoshihara, Kazuya; Moriyama, Koji; Machida, Motoi; Tatsumoto, Hideki

    2007-01-01

    Adsorption of toxic heavy metal ions and aromatic compounds onto activated carbons of various amount of surface C-O complexes were examined to study the optimum surface conditions for adsorption in aqueous phase. Cadmium(II) and zinc(II) were used as heavy metal ions, and phenol and nitrobenzene as aromatic compounds, respectively. Activated carbon was de-ashed followed by oxidation with nitric acid, and then it was stepwise out-gassed in helium flow up to 1273 K to gradually remove C-O complexes introduced by the oxidation. The oxidized activated carbon exhibited superior adsorption for heavy metal ions but poor performance for aromatic compounds. Both heavy metal ions and aromatics can be removed to much extent by the out-gassed activated carbon at 1273 K. Removing C-O complexes, the adsorption mechanisms would be switched from ion exchange to Cπ-cation interaction for the heavy metals adsorption, and from some kind of oxygen-aromatics interaction to π-π dispersion for the aromatics

  9. Chromatography of metal ions with a triazine chelating resin

    Energy Technology Data Exchange (ETDEWEB)

    Wang, W.N.

    1979-05-01

    The synthesis, characterization, and some analytical applications of a new triazine resin are described. Separation of group IB, IIB, VIB, and VIIB metal ions from group VIII metal ions is achieved by this PDT-4 resin. Calcium(II) and magnesium(II) are taken up at pH = 6, 0.1 M acetate and are eluted at pH = 6, 0.1 M sodium nitrate. Copper(II) is retained at pH = 6, 0.1 M acetate and pH = 1 hydrochloric acid and is eluted subsequently by 5 M perchloric acid. Molybdenum(VI) is sorbed selectively from 0.1 N sulfuric acid or hydrochloric acid and is eluted in a tight band by 0.1 N sodium hydroxide. Numerous rapid column chromatographic separations are reported using this new resin, including analysis of NBS standard samples.

  10. Chromatography of metal ions with a triazine chelating resin

    International Nuclear Information System (INIS)

    Wang, W.N.

    1979-05-01

    The synthesis, characterization, and some analytical applications of a new triazine resin are described. Separation of group IB, IIB, VIB, and VIIB metal ions from group VIII metal ions is achieved by this PDT-4 resin. Calcium(II) and magnesium(II) are taken up at pH = 6, 0.1 M acetate and are eluted at pH = 6, 0.1 M sodium nitrate. Copper(II) is retained at pH = 6, 0.1 M acetate and pH = 1 hydrochloric acid and is eluted subsequently by 5 M perchloric acid. Molybdenum(VI) is sorbed selectively from 0.1 N sulfuric acid or hydrochloric acid and is eluted in a tight band by 0.1 N sodium hydroxide. Numerous rapid column chromatographic separations are reported using this new resin, including analysis of NBS standard samples

  11. Multiply charged metal ions in high current pulsed vacuum arcs

    Science.gov (United States)

    Yushkov, G. Yu.; Nikolaev, A. G.; Frolova, V. P.; Oks, E. M.; Rousskikh, A. G.; Zhigalin, A. S.

    2017-12-01

    We show that vacuum arc plasma discharges with a current of several kiloamperes and duration of a few microseconds can generate multiply charged metal ions with charge states greater than 10+. The physical mechanism behind this is discussed, suggesting an optimum arc current for higher charge states depending on the pulse duration and cathode material. Measurements of ion mass-to-charge ratio and images taken with nanosecond resolution suggest that, higher charge state ions are produced at characteristic distances of ˜10 mm from the cathode as the arc current peaks, and the process responsible for their generation is additional ionization as the discharge is pinched by its self-magnetic field. The maximum and mean ion charge states reveal a considerable increase for the all cathode materials studied: magnesium, aluminum, zirconium, tin, tantalum, gold, lead, and bismuth. For bismuth ions, the maximum charge state reaches a record-breaking value of 17+ and the mean of the charge state distribution is 12.6+. The results obtained are of interest for vacuum arc discharge physics and for ion beam technologies.

  12. Extraction of metal ions using chemically modified silica gel: a PIXE analysis.

    Science.gov (United States)

    Jal, P K; Dutta, R K; Sudarshan, M; Saha, A; Bhattacharyya, S N; Chintalapudi, S N; K Mishra, B

    2001-08-30

    Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.

  13. Adsorption of heavy metal ions by activated charcoal

    International Nuclear Information System (INIS)

    Fujikawa, Mitsuo

    1978-01-01

    The adsorption effect was measured for several kinds of heavy metal ions, Pb 2+ , Cd 2+ , Cu 2+ and Zn 2+ by passing them through activated charcoal beds and changing the pH values of solutions. The test procedure is to keep the pH value of solution more than 10 at first, filter heavy metal hydroxide deposit, measure the remaining ion concentration in filtrate, and also test the influence of the addition of alkali to each kind of ions. The individual test procedure for each kind of ions is explained. As for the Cd ions, after the detailed experimental procedure is explained, the adsorption characteristic line is shown as the relation between the adsorption quantity and the equilibrium concentration of Cd 2+ . The similar test procedure and the adsorption characteristic lines are shown and evaluated about Pb 2+ , Cu 2+ and Zn 2+ . These lines are all linear, but have different adsorption quantity and inclination in relation to heavy metal ion concentration. Concerning the influence of pH to adsorption, the characteristics of pH increase are presented, when alkali is added by various quantities to Zn 2+ , Cu 2+ , Pb 2+ and Cd 2+ . The pH of Pb 2+ increased to about 10 by adding 0.4 cc alkali and saturates, but the pH of the other ions did not saturate by adding less than 1.5 cc alkali. When the water containing heavy metals are treated, Cd 2+ , Pb 2+ , Cu 2+ and Zn 2+ are removed almost satisfactorily by passing them through active charcoal filters and keeping pH at 10. The experimental concentrations are 0.05 ppm at pH 10 in Cd, 0.86 ppm at 10.3 in Pb, 0 ppm at pH 9.6 in Cu, 0.06 ppm at pH 8.8 and 12.4 ppm at pH 9.8 in Zn. (Nakai, Y.)

  14. Lithium metal doped electrodes for lithium-ion rechargeable chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Gao; Battaglia, Vince; Wang, Lei

    2016-09-13

    An embodiment of the invention combines the superior performance of a polyvinylidene difluoride (PVDF) or polyethyleneoxide (POE) binder, the strong binding force of a styrene-butadiene (SBR) binder, and a source of lithium ions in the form of solid lithium metal powder (SLMP) to form an electrode system that has improved performance as compared to PVDF/SBR binder based electrodes. This invention will provide a new way to achieve improved results at a much reduced cost.

  15. Gas porosity in metals and alloys irradiated by helium ions

    International Nuclear Information System (INIS)

    Kalin, B.A.; Korshunov, S.N.; Chernov, I.I.

    1987-01-01

    Experimental studies of the development of gas porosity in metals and alloys during irradiation with helium ions up to high doses and during post-irradiation annealings, are reviewed. The main theoretical problems of the mechanisms of bubble formation and growth, the regularities and peculiarities of bubble development in a thin near-the surface layer during the introduction of helium with the energy of tens of kiloelectron volt, are considered

  16. Coordination diversity of new mononucleating hydrazone in 3d metal complexes: Synthesis, characterization and structural studies

    Directory of Open Access Journals (Sweden)

    RAJESH S. BALIGAR

    2006-12-01

    Full Text Available The mononucleating hydrazone ligand LH3, a condensation product of salicyloylhydrazine and (2-formylphenoxyacetic acid, was synthesized and its coordination behavior with first row transition metal(II ions was investigated by isolating and elucidating the structure of the complexes using elemental analysis, conductivity and magnetic susceptibility measurements, as well as IR, 1H-NMR, electronic and EPR spectral techniques. The ligand forms mononuclear metal(II complexes of the type [CoLH(H2O2], [NiLH(H2O2, [CuLH] and [ZnLH]. The ligand field parameters, Dq, B and b values, in the case of the cobalt and nickel complexes support not only the octahedral geometry around the metal ion, but also imply the covalent nature of the bonding in the complexes. The EPR study revealed the presence of a spin exchange interaction in the solid copper complex and the covalent nature of the bonding. The 1H-NMR study of the zinc(II complex indicated the non-involvement of the COOH group in the coordination. The physico-chemical study supports for the presence of octahedral geometry around cobalt(II, nickel(II and tetrahedral geometry around copper(II and zinc(II ions.

  17. Towards the role of metal ions in the structural variability of proteins: CdII speciation of a metal ion binding loop motif

    DEFF Research Database (Denmark)

    Jancsó, Attila; Szunyogh, Dániel; Gyurcsik, Béla

    2011-01-01

    A de novo designed dodecapeptide (HS), inspired by the metal binding loops of metal-responsive transcriptional activators, was synthesized. The aim was to create a model system for structurally promiscuous and intrinsically unstructured proteins, and explore the effect of metal ions on their stru...... the peptide is exchanging between a number of structures also in its metal ion bound state(s), as indicated by NMR and PAC data. © 2011 The Royal Society of Chemistry....

  18. In situ NMR measurement of macromolecule-bound metal ion concentrations.

    Science.gov (United States)

    Kozlyuk, Natalia; Sengupta, Suvrajit; Lupták, Andrej; Martin, Rachel W

    2016-04-01

    Many nucleic acids and proteins require divalent metal ions such as Mg(2+) and Ca(2+) for folding and function. The lipophilic alignment media frequently used as membrane mimetics also bind these divalent metals. Here we demonstrate the use of (31)P NMR spectrum of a metal ion chelator (deoxycytidine diphosphate) to measure the bound [Mg(2+)] and [Ca(2+)] in situ for several biological model systems at relatively high divalent ion concentrations (1-10 mM). This method represents a general approach to measuring divalent metal ion binding in NMR samples where the amount and type of metal ion added to the system is known.

  19. Complex Metal Hydrides for Hydrogen, Thermal and Electrochemical Energy Storage

    Directory of Open Access Journals (Sweden)

    Kasper T. Møller

    2017-10-01

    Full Text Available Hydrogen has a very diverse chemistry and reacts with most other elements to form compounds, which have fascinating structures, compositions and properties. Complex metal hydrides are a rapidly expanding class of materials, approaching multi-functionality, in particular within the energy storage field. This review illustrates that complex metal hydrides may store hydrogen in the solid state, act as novel battery materials, both as electrolytes and electrode materials, or store solar heat in a more efficient manner as compared to traditional heat storage materials. Furthermore, it is highlighted how complex metal hydrides may act in an integrated setup with a fuel cell. This review focuses on the unique properties of light element complex metal hydrides mainly based on boron, nitrogen and aluminum, e.g., metal borohydrides and metal alanates. Our hope is that this review can provide new inspiration to solve the great challenge of our time: efficient conversion and large-scale storage of renewable energy.

  20. Adhesive and abrasive wear mechanisms in ion implanted metals

    International Nuclear Information System (INIS)

    Dearnaley, G.

    1985-01-01

    The distinction between adhesive and abrasive wear processes was introduced originally by Burwell during the nineteen-fifties, though some authors prefer to classify wear according to whether it is mild or severe. It is argued here that, on the basis of the performance of a variety of ion implanted metal surfaces, exposed to different modes of wear, the Burwell distinction is a valid one which, moreover, enables us to predict under which circumstances a given treatment will perform well. It is shown that, because wear rates under abrasive conditions are very sensitive to the ratio of the hardness of the surface to that of the abrasive particles, large increases in working life are attainable as a result of ion implantation. Under adhesive wear conditions, the wear rate appears to fall inversely as the hardness increases, and it is advantageous to implant species which will create and retain a hard surface oxide or other continuous film in order to reduce metal-metal contact. By the appropriate combination of physico-chemical changes in an implanted layer it has been possible to reduce wear rates by up to three orders of magnitude. Such rates compensate for the shallow depths achievable by ion implantation. (orig.)

  1. Superhydrogels of nanotubes capable of capturing heavy-metal ions.

    Science.gov (United States)

    Song, Shasha; Wang, Haiqiao; Song, Aixin; Hao, Jingcheng

    2014-01-01

    Self-assembly regulated by hydrogen bonds was successfully achieved in the system of lithocholic acid (LCA) mixed with three organic amines, ethanolamine (EA), diethanolamine (DEA), and triethanolamine (TEA), in aqueous solutions. The mixtures of DEA/LCA exhibit supergelation capability and the hydrogels consist of plenty of network nanotubes with uniform diameters of about 60 nm determined by cryogenic TEM. Interestingly, the sample with the same concentration in a system of EA and LCA is a birefringent solution, in which spherical vesicles and can be transformed into nanotubes as the amount of LCA increases. The formation of hydrogels could be driven by the delicate balance of diverse noncovalent interactions, including electrostatic interactions, hydrophobic interactions, steric effects, van der Waals forces, and mainly hydrogen bonds. The mechanism of self-assembly from spherical bilayer vesicles into nanotubes was proposed. The dried hydrogels with nanotubes were explored to exhibit the excellent capability for capturing heavy-metal ions, for example, Cu(2+), Co(2+), Ni(2+), Pb(2+), and Hg(2+). The superhydrogels of nanotubes from the self-assembly of low-molecular-weight gelators mainly regulated by hydrogen bonds used for the removal of heavy-metal ions is simple, green, and high efficiency, and provide a strategic approach to removing heavy-metal ions from industrial sewage. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Mixed Metal Complexes of Isoniazid and Ascorbic Acid: Chelation ...

    African Journals Online (AJOL)

    HP

    these ligands and their metal complexes have revealed the bi-dentate coordination of isoniazid ligand to ... of the drugs on coordination with a metal is enhanced ..... James, O.O., Nwinyi, C.O. and. Allensela, M.A. (2008). Cobalt(II) complexes of mixed antibiotics: Synthesis,. Characterization, antimicrobial potential and their.

  3. Synthesis and characterization of some metal complexes of a Schiff ...

    African Journals Online (AJOL)

    dione-2-imine-N-. 2-propionate (IDIP) ... coordination to metals [25, 27], particularly, Schiff bases and their metal complexes have been shown to exhibit ..... The values show that the manganese and cobalt complexes are high spin, the iron ...

  4. DNA interactions and biocidal activity of metal complexes of ...

    Indian Academy of Sciences (India)

    Narendrula Vamsikrishna

    cancer agents, and the binding between DNA and metal complexes were used in understanding the interaction between the drugs and DNA. In general, the tumour cells can be smashed by stopping the replication of the unnatural DNA. Using Schiff base transition metal complex in particular, affected DNA may be dented by.

  5. Higher coordination numbers of metals in isolated complexes

    International Nuclear Information System (INIS)

    Wells, A.F.

    1988-01-01

    The material pertaining to island complexes with polydentate ligands where transition and rare earth metals have coordination numbers from 7 to 10 is generalized. The coordination of different ligands in the complexes of these metals depending on the chemical composition and structure of chelating ligand, as well as characteristics of the central atom, is considered

  6. 40 CFR 721.4594 - Substituted azo metal complex dye.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted azo metal complex dye. 721... Substances § 721.4594 Substituted azo metal complex dye. (a) Chemical substance and significant new uses... dye (PMN P-94-499) is subject to reporting under this section for the significant new uses described...

  7. Lability of nanoparticulate metal complexes in electrochemical speciation analysis

    NARCIS (Netherlands)

    Leeuwen, van Herman P.; Town, Raewyn M.

    2016-01-01

    Lability concepts are elaborated for metal complexes with soft (3D) and hard (2D) aqueous nanoparticles. In the presence of a non-equilibrium sensor, e.g. a voltammetric electrode, the notion of lability for nanoparticulate metal complexes, M-NP, reflects the ability of the M-NP to maintain

  8. Dipicolinate complexes of main group metals with hydrazinium cation

    Indian Academy of Sciences (India)

    Unknown

    Some new coordination complexes of hydrazinium main group metal dipicolinate hydrates of formulae ... dipicolinate dianions and non-coordinating hydrazinium cations. Conductance measurements ... group metals, and the ability of dip2– to function as a tridentate ligand, we expect to find anionic complexes of the type ...

  9. Unravelling metal mobility under complex contaminant signatures.

    Science.gov (United States)

    de Souza Machado, Anderson Abel; Spencer, Kate L; Zarfl, Christiane; O'Shea, Francis T

    2018-05-01

    Metals are concerning pollutants in estuaries, where contamination can undergo significant remobilisation driven by physico-chemical forcing. Environmental concentrations of metals in estuarine sediments are often higher than natural backgrounds, but show no contiguity to potential sources. Thus, better understanding the metal mobility in estuaries is essential to improve identification of pollution sources and their accountability for environmental effects. This study aims to identify the key biogeochemical drivers of metal mobilisation on contaminated estuarine sediments through (1) evaluation of the potential mobilisation under controlled conditions, and (2) investigation of the relevance of metal mobilisation for in situ pollution levels in an area with multiple contaminant sources. Sediments from a saltmarsh adjacent to a coastal landfill, a marina, and a shipyard on the Thames Estuary (Essex, UK) were exposed in the laboratory (24h, N=96, 20°C) to water under various salinity, pH, and redox potential. Major cations, Fe(II), and trace metal concentrations were analysed in the leachate and sediment. Salinity, pH and redox had a significant effect on metal mobilisation (pmetal spatial distribution. However, physicochemical parameters explained up to 97% of geochemically normalized metal concentrations in sediments. Organic matter and pH were dominant factors for most of the metal concentrations at the sediment surface. At subsurface, major cations (Ca, Na, Mg and K) were determinant predictors of metal concentrations. Applying the empirical model obtained in the laboratory to geochemical conditions of the studied saltmarsh it was possible to demonstrate that Fe mobilisation regulates the fate of this (and other) metal in that area. Thus, present results highlight the importance of metal mobility to control sediment pollution and estuarine fate of metals. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Plasmon hybridization in complex metallic nanostructures

    Science.gov (United States)

    Hao, Feng

    With Plasmon Hybridization (PH) and Finite-Difference Time-Domain (FDTD) method, we theoretically investigated the optical properties of some complex metallic nanostructures (coupled nanoparticle/wire, nanostars, nanorings and combined ring/disk nanocavity systems). We applied the analytical formulism of PH studying the plasmonic coupling of a spherical metallic nanoparticle and an infinite long cylindrical nanowire. The plasmon resonance of the coupled system is shown shifted in frequency, which highly depends on the polarization of incident light relative to the geometry of the structure. We also showed the nanoparticle serves as an efficient antenna coupling the electromagnetic radiation into the low-energy propagating wire plasmons. We performed an experimental and theoretical analysis of the optical properties of gold nanorings with different sizes and cross sections. For light polarized parallel to the ring, the optical spectrum sensitively depends on the incident angle. When light incidence is normal to the ring, two dipolar resonance is observed. As the incident light is titled, some previously dark mulipolar plasmon resonances will be excited as a consequence of the retardation. The concept of plasmon hybridization is combined with the power of brute-force numerical methods to understand the plasmonic properties of some very complicated nanostructures. We showed the plasmons of a gold nanostar are a result of hybridization of the plasmons of the core and the tips of the particle. The core serves as a nanoantenna, dramatically enhanced the optical spectrum and the field enhancement of the nanostar. We also applied this method analyzing the plasmonic modes of a nanocavity structure composed of a nanodisk with a surrounding minoring. For the concentric combination, we showed the nature of the plasmon modes can be understood as the plasmon hybrization of an individual ring and disk. The interation results in a blueshifted and broadened superradiant antibonding

  11. H-D exchange and other reactions of saturated hydrocarbons in solutions of transition metal complexes

    International Nuclear Information System (INIS)

    Shilov, A.E.; Shteinman, A.A.

    1975-01-01

    Heating methane, ethane and other paraffins with solutions of chlorides of Pt(II) or Pt(IV) in heavy water there was H-D exchange of D 2 O with RH molecule. The reaction was inhibited by chloride ions and accompanied by reduction of metal compounds. The investigation of kinetics and mechanism of these reactions has shown that alkyl derivatives of transition metals are the intermediates, the reaction rate increases with electron accepting properties of metal complexes and electron donating properties of C-H containing compounds. C-H bond was found to be activated to some reactions of substitution and dehydrogenation as well. (K.A.)

  12. Synthesis, structure and reactivity of rare-earth metal complexes containing anionic phosphorus ligands.

    Science.gov (United States)

    Li, Tianshu; Kaercher, Sabrina; Roesky, Peter W

    2014-01-07

    A comprehensive review of structurally characterized rare-earth metal complexes containing anionic phosphorus ligands is presented. Since rare-earth elements form hard ions and phosphorus is considered as a soft ligand, the rare-earth metal phosphorus coordination is regarded as a less favorite combination. Three classes of phosphorus ligands, (1) the monoanionic organophosphide ligands (PR2(-)) bearing one negative charge on the phosphorus atom; (2) the dianionic phosphinidene (PR(2-)) and P(3-) ligands; and (3) the pure inorganic polyphosphide ligands (Pn(x-)), are included here. Particular attention has been paid to the synthesis, structure, and reactivity of the rare-earth metal phosphides.

  13. Metallacyclopentadienes: structural features and coordination in transition metal complexes

    International Nuclear Information System (INIS)

    Dolgushin, Fedor M; Yanovsky, Aleksandr I; Antipin, Mikhail Yu

    2004-01-01

    Results of structural studies of polynuclear transition metal complexes containing the metallacyclopentadiene fragment are overviewed. The structural features of the complexes in relation to the nature of the substituents in the organic moiety of the metallacycles, the nature of the transition metals and their ligand environment are analysed. The main structural characteristics corresponding to different modes of coordination of metallacyclopentadienes to one or two additional metal centres are revealed.

  14. Investigation of heavy metal removal from motorway stormwater using inorganic ion exchange

    International Nuclear Information System (INIS)

    Pitcher, Sarah

    2002-01-01

    Stormwater runoff from motorway surfaces contains toxic heavy metals that are not sufficiently removed by current treatment systems. This research has investigated the potential use of inorganic ion exchange materials to further reduce the levels of dissolved heavy metals. Candidate materials (synthetic/natural zeolites, clay/modified clay, hydrotalcite, lignite) were tested by a shaking procedure (mixed 5 mg dm -3 of each heavy metals, shaken for 10 min) and analysed by atomic absorption spectrometry. The synthetic zeolites MAP and Y showed 100% heavy metal removal and were investigated further by a series of batch experiments. The zeolites exhibited a selectivity sequence Pb > Cu > Cd ∼ Zn. Zeolite MAP has a high capacity for heavy metal uptake (4.5 meq g -1 ), but is not practical for use in a treatment facility owing to its low particle size (3 μm). However, large zeolite pellets (∼ 2 mm) were found to have a low heavy metal uptake (∼ 44 %) due to diffusion limitations. Selected materials (zeolites MAP, Y, mordenite, and carbon-based lignite) were tested in actual and spiked motorway stormwater. The synthetic zeolites effectively remove heavy metals (∼ 100 %) but change the environmental chemistry of the stormwater by releasing high concentrations of sodium, removing calcium ions and increasing the solution pH. The presence of other dissolved contaminants in motorway stormwater inhibited the uptake of heavy metals by the natural zeolite mordenite (34 % less removal). Alkali/alkaline-earth metals (Na, Ca) in solution compete for exchange sites in lignite and mordenite, reducing the heavy metal uptake. Chloride in solution forms complexes with cadmium, severely reducing its uptake by zeolite Y. The presence of dissolved road salt is a potentially serious concern as it causes previously exchanged heavy metals to be re-eluted, especially zinc and cadmium. Zeolite MAP as an exchanger is relatively unaffected by road salt. There is potential for the use of

  15. Metal negative ion production by a planar magnetron sputter type radio frequency ion source

    Science.gov (United States)

    Yoshioka, K.; Kanda, S.; Kasuya, T.; Wada, M.

    2017-08-01

    A planar magnetron sputter type ion source has been operated to investigate metal negative ion production. Radio frequency power at 13.56 MHz was directly supplied to the planar target made of 2 mm thick Cu disk to maintain plasma discharge and induce DC self-bias to the target for sputtering. Beam profile was obtained and the peak of negative ion beam profile was shifted to 6 mm as the beam traversed the 32 mT magnetic field in the region of the plasma grid. Extraction of Cu- beam was performed and the Cu- beam current was found consisted of two components: Cu-(surface) and Cu-(volume). Negative ion spectra were observed to measure the ratio of the surface component to the volume component. The surface component of Cu- occupied 67% of the total beam at the maximum, while it decreased the fraction down to about 50% as the source pressure was increased.

  16. Removal Process of Heavy Metal Ions from Squid Gut Wastes with Dilute Suluric Acid Leaching and Electrowinning Methods

    OpenAIRE

    嶋影, 和宜; 平井, 伸治; 戸田, 茂雄; 山本, 浩

    2003-01-01

    In order to remove heavy metal ions contained in organic squid gut waste, a novel process has been developed with both dilute suluric acid leaching and electrowinning methods. This process was consisted of three procedures, which are the elimination of greasy component in squid gut wastes, the dissolution of heavy metal ions and the electro-deposition of heavy metal ions. Heavy metal ions contained in organic squid gut wastes are zinc, cadmium and copper ions. Heavy metal ions are leached eas...

  17. Synthesis, spectral, thermal and antimicrobial studies of some new tri metallic biologically active ceftriaxone complexes

    Science.gov (United States)

    Ali, Alaa E.

    2011-01-01

    Iron, cobalt, nickel and copper complexes of ceftriaxone were prepared in 1:3 ligand:metal ratio to examine the ligating properties of the different moieties of the drug. The complexes were found to have high percentages of coordinated water molecules. The modes of bonding were discussed depending on the infrared spectral absorption peaks of the different allowed vibrations. The Nujol mull electronic absorption spectra and the magnetic moment values indicated the Oh geometry of the metal ions in the complexes. The ESR spectra of the iron, cobalt, and copper complexes were determined and discussed. The thermal behaviors of the complexes were studied by TG and DTA techniques. The antimicrobial activities of the complexes were examined and compared to that of the ceftriaxone itself.

  18. Extraction of metal ions by neutral β-diphosphoramides

    International Nuclear Information System (INIS)

    Madic, C.

    1990-01-01

    The extracting ability of β-diphosphoramides of the type R-N[P(O)(NMe 2 ) 2 ] 2 with R=-CH 3 (NIPA), -C 12 H 25 (ODIPA), or -C 16 H 33 (OHDIPA) for metal ions such as lanthanides, uranyl, and the transuranium elements Am(III) and Pu(IV) has been studied. Extraction yields depend on the nature of the ligand, the organic diluent (nitromethane, kerosene, tert-butylbenzene), the concentration of nitric acid in the aqueous phase, and the ligand-to-metal ratio, Q. The results show that the bidentate phosphoramides are very efficient extractants for all of the metals studied, even at low ratios Q. The presence of nitric acid generally enhances the extraction yields. On the other hand, selectivity is rather poor with these ligands. A particular effort has been made to determine the nature of extracted species by NMR spectroscopy

  19. A Speciation Study on the Perturbing Effects of Iron Chelators on the Homeostasis of Essential Metal Ions.

    Science.gov (United States)

    Crisponi, Guido; Nurchi, Valeria Marina; Crespo-Alonso, Miriam; Sanna, Gavino; Zoroddu, Maria Antonietta; Alberti, Giancarla; Biesuz, Raffaela

    2015-01-01

    A number of reports have appeared in literature calling attention to the depletion of essential metal ions during chelation therapy on β-thalassaemia patients. We present a speciation study to determine how the iron chelators used in therapy interfere with the homeostatic equilibria of essential metal ions. This work includes a thorough analysis of the pharmacokinetic properties of the chelating agents currently in clinical use, of the amounts of iron, copper and zinc available in plasma for chelation, and of all the implied complex formation constants. The results of the study show that a significant amount of essential metal ions is complexed whenever the chelating agent concentration exceeds the amount necessary to coordinate all disposable iron--a frequently occurring situation during chelation therapy. On the contrary, copper and zinc do not interfere with iron chelation, except for a possible influence of copper on iron speciation during deferiprone treatment.

  20. Magnetic nanoparticle based solid-phase extraction of heavy metal ions: A review on recent advances.

    Science.gov (United States)

    Hemmati, Maryam; Rajabi, Maryam; Asghari, Alireza

    2018-02-06

    This review (with 151 refs) focuses on recent progress that has been made in magnetic nanoparticle-based solid phase extraction (SPE), pre-concentration and speciation of heavy metal ions. In addition, it discusses applications to complex real samples such as environmental, food, and biological matrices. The introduction addresses current obstacles and limitations associated with established SPE approaches and discusses the present state of the art in different formats of off-line and on-line SPE. The next section covers magnetized inorganic nanomaterials for use in SPE, with subsections on magnetic silica, magnetic alumina and titania, and on magnetic layered double oxides. A further section treats magnetized carbonaceous nanomaterials for use in SPE, with subsections on magnetic graphene and/or graphene oxides, magnetic carbon nanotubes and magnetic carbon nitrides. We then discuss the progress made in SPE based on the use of magnetized organic polymers (mainly non-imprinted and ion-imprinted polymer). This is followed by shorter sections on the use of magnetized metal organic frameworks, magnetized ionic liquids and magnetized biosorbents. All sections include discussions of the nanomaterials in terms of selectivity, sorption capacity, mechanisms of sorption and common routes for material synthesis. A concluding section addresses actual challenges and discusses perspective routes towards further improvements. Graphical abstract An overview on booster nanomaterials (ionic liquids, inorganic, organic and biological materials, and metal-organic frameworks) for use in magnetic nanoparticle-based solid-phase extraction of heavy metal ions.

  1. Sensitivity to Heavy-Metal Ions of Unfolded Fullerene Quantum Dots

    Directory of Open Access Journals (Sweden)

    Erica Ciotta

    2017-11-01

    Full Text Available A novel type of graphene-like quantum dots, synthesized by oxidation and cage-opening of C60 buckminsterfullerene, has been studied as a fluorescent and absorptive probe for heavy-metal ions. The lattice structure of such unfolded fullerene quantum dots (UFQDs is distinct from that of graphene since it includes both carbon hexagons and pentagons. The basic optical properties, however, are similar to those of regular graphene oxide quantum dots. On the other hand, UFQDs behave quite differently in the presence of heavy-metal ions, in that multiple sensitivity to Cu2+, Pb2+ and As(III was observed through comparable quenching of the fluorescent emission and different variations of the transmittance spectrum. By dynamic light scattering measurements and transmission electron microscope (TEM images we confirmed, for the first time in metal sensing, that this response is due to multiple complexation and subsequent aggregation of UFQDs. Nonetheless, the explanation of the distinct behaviour of transmittance in the presence of As(III and the formation of precipitate with Pb2+ require further studies. These differences, however, also make it possible to discriminate between the three metal ions in view of the implementation of a selective multiple sensor.

  2. The New Role for an Old Kinase: Protein Kinase CK2 Regulates Metal Ion Transport

    Directory of Open Access Journals (Sweden)

    Adam J. Johnson

    2016-12-01

    Full Text Available The pleiotropic serine/threonine protein kinase CK2 was the first kinase discovered. It is renowned for its role in cell proliferation and anti-apoptosis. The complexity of this kinase is well reflected by the findings of past decades in terms of its heterotetrameric structure, subcellular location, constitutive activity and the extensive catalogue of substrates. With the advent of non-biased high-throughput functional genomics such as genome-wide deletion mutant screening, novel aspects of CK2 functionality have been revealed. Our recent discoveries using the model organism Saccharomyces cerevisiae and mammalian cells demonstrate that CK2 regulates metal toxicity. Extensive literature search reveals that there are few but elegant works on the role of CK2 in regulating the sodium and zinc channels. As both CK2 and metal ions are key players in cell biology and oncogenesis, understanding the details of CK2’s regulation of metal ion homeostasis has a direct bearing on cancer research. In this review, we aim to garner the recent data and gain insights into the role of CK2 in metal ion transport.

  3. SYNTHESIS AND CHARACTERIZATION OF SALICYLALDAZINE AND ITS METAL (II) COMPLEXES DERIVED FROM METAL (II) CHLORIDES

    OpenAIRE

    Jamila wazir

    2016-01-01

    The salicylaldazine (ligand) and its metal (II) complexes like copper (II), nickel (II), zinc (II), cobalt (II) and manganese (II) complexes has been synthesized and characterized by different techniques using FTIR, UV-VIS spectroscopy. The ligand (salicylaldazine) is synthesized by the condensation reaction of salicylaldehyde and hydrazine sulfate. The salicylaldazine metal (II) complexes like Cu (II) , Ni(II), Zn (II), Co(II), Mn(II) were prepared by using metal (II) chloride in dioxane. Th...

  4. Heavy metal ions adsorption from mine waters by sawdust

    Directory of Open Access Journals (Sweden)

    G. Bogdanović

    2009-10-01

    Full Text Available In this work the results on the batch and column adsorption of copper and some associated ions by employing linden and poplar sawdust as a low-cost adsorbent are presented. The mine water from a local abandoned copper mine, as well as synthetic solutions of those ions which are the main constituents of the mine water were both used as a model-system in this study. The adsorption ability of the chosen sawdust to adsorb heavy metal ions is considered as a function of the initial pH of the solution and kind of metal ions. At lower pH of solutions the adsorption percentage (AD % decreases leading to a zero AD % at pH < 1.1. Maximum AD % is achieved at 3.5 < pH < 5. It was found that poplar and linden sawdust have both almost equal adsorption capacities against copper ions. The highest AD % ( ≈80% was achieved for Cu2+, while for Fe2+ it was slightly above 10%. The other considered ions (Zn2+ and Mn2+ were within this interval. The results obtained in the batch mode were verified through the column test by using the real mine water originating from an acid mine drainage (AMD of the copper mine „Cerovo“, RTB Bor. The breakthrough curves are presented as a function of the aqueous phase volume passed through the column allowing having an insight into the column adsorption features. Breakthrough points were determined for copper, manganese and zinc ions. A very high adsorption degree – higher than 99% was achieved in these experiments for all mentioned ions. After completing the adsorption, instead of desorption, the loaded sawdust was drained, dried and burned; the copper bearing ash was then leached with a controlled volume of sulphuric acid solution to concentrate copper therein. The obtained leach solution had the concentration of copper higher than 15 g dm-3 and the amount of H2SO4 high enough to serve as a supporting electrolyte suitable to be treated by the electrowinning for recovery of copper. The technology process based on the column

  5. Molecular modeling of metal complexation by a fluoroquinolone antibiotic.

    Science.gov (United States)

    Aristilde, Ludmilla; Sposito, Garrison

    2008-11-01

    An understanding of the factors controlling the chemodynamics of fluoroquinolone antibiotics in different environmental matrices is a necessary prerequisite to the assessment of their potential impact on nontarget organisms in soils and receiving waters. Of particular interest are the complexes formed between fluoroquinolones and metal cations, which are believed to be important in the mechanism of sequestration of the antibiotic by minerals and natural organic matter. The structures of these complexes have not been fully resolved by conventional spectroscopy; therefore, molecular simulations may provide useful complementary insights. We present results from apparently the first molecular dynamics simulations of a widely used fluoroquinolone antibiotic, ciprofloxacin (Cipro), in aqueous complexes with five metal cations typically found in soils and surface waters: Ca2+, Mg2+, Fe2+, Na+, and K+. The interatomic potential functions employed in the simulations were validated by comparison with available structural data for solid-phase Cipro-hexahydrate and for the metal cations in aqueous solution. Although no comprehensive structural data on the aqueous complexes appear to be available, properties of the metal complexes predicted by our simulations agree with available data for solid-phase metal-Cipro complexes. Our results indicate that the ionic potential of the metal cation controls the stability of the complex formed and that the hydration number of the metal cation in aqueous solution determines its coordination number with O atoms in the metal-Cipro complex. In respect to environmental chemodynamics, our results imply that Cipro will form two configurations of bidendate chelates with metal centers on exposed surfaces of mineral oxides, water-bridged surface complexes with exchangeable cations in clay mineral interlayers, and cation-bridged complexes with functional groups in natural organic matter.

  6. Transition metal complexes of neocryptolepine analogues. Part I: Synthesis, spectroscopic characterization, and invitro anticancer activity of copper(II) complexes

    Science.gov (United States)

    Emam, Sanaa Moustafa; El Sayed, Ibrahim El Tantawy; Nassar, Nagla

    2015-03-01

    New generation of copper(II) complexes with aminoalkylaminoneocryptolepine as bidentate ligands has been synthesized and it is characterized by elemental analyses, magnetic moment, spectra (IR, UV-Vis, 1H NMR and ESR) and thermal studies. The IR data suggest the coordination modes for ligands which behave as a bidentate with copper(II) ion. Based on the elemental analysis, magnetic studies, electronic and ESR data, binuclear square planar geometry was proposed for complexes 7a, 7b, square pyramidal for 9a, 9b and octahedral for 8a, 8b, 10a, 10b. The molar conductance in DMF solution indicates that all complexes are electrolyte except 7a and 7b. The ESR spectra of solid copper(II) complexes in powder form showed an axial symmetry with 2B1g as a ground state and hyperfine structure. The thermal stability and degradation of the ligands and their metal complexes were studied employing DTA and TG methods. The metal-free ligands and their copper(II) complexes were tested for their in vitro anticancer activity against human colon carcinoma (HT-29). The results showed that the synthesized copper(II) complexes exhibited higher anticancer activity than their free ligands. Of all the studied copper(II) complexes, the bromo-substituted complex 9b exhibited high anticancer activity at low micromolar inhibitory concentrations (IC50 = 0.58 μM), compared to the other complexes and the free ligands.

  7. A simple alkali-metal and noble gas ion source for SIMS equipments with mass separation of the primary ions

    International Nuclear Information System (INIS)

    Duesterhoeft, H.; Pippig, R.

    1986-01-01

    An alkali-metal ion source working without a store of alkali-metals is described. The alkali-metal ions are produced by evaporation of alkali salts and ionization in a low-voltage arc discharge stabilized with a noble gas plasma or in the case of small alkali-metal ion currents on the base of the well known thermic ionization at a hot tungsten wire. The source is very simple in construction and produces a stable ion current of 0.3 μA for more than 100 h. It is possible to change the ion species in a short time. This source is applicable to all SIMS equipments using mass separation for primary ions. (author)

  8. [Metal ions restrain the elimination of 4-tert-octylphenol by delta-MnO2].

    Science.gov (United States)

    Li, Fei-Li; Mou, Hua-Qian

    2013-06-01

    The effect of metal ions on elimination of 4-t-OP by synthetic delta-MnO2 suspension at pH 4.0 was studied. Experiments indicated that the removal of 4-t-OP by delta-MnO2 achieved 100% at reaction time of 150 min. However, the removal of 4-t-OP by delta-MnO2 was restrained when metal ions were added, and the higher concentration of metal ion was, the stronger the inhibition produced. Additionally, there were apparent differences among the inhibitory effect of the tested metal ions. Firstly, Pb2+ and Mn2+ had the strongest effect at pH 4.0, followed by the transition metal ions, then the alkaline earth ions, while the alkali metal ions had little influence on the removal of 4-t-OP by delta-MnO2. Also comparing the adsorption results of metal ions by delta-MnO2, Pb2+ showed the greatest attraction with delta-MnO2, and among the other metal ions, transition metal ions were adsorbed a little more strongly on delta-MnO2 than alkaline earth metal ions. Consequences showed that the inhibitory effects of metal ions were due to their occupying reactive sites on delta-MnO2 surface, which competed with 4-t-OP. Moreover, the dissimilar suppressions were contributed by the different adsorption capacities, surface structure change of MnO2 and the difference of free metal ion percentage in solution as well as metal ions radii.

  9. Non-Native Metal Ion Reveals the Role of Electrostatics in Synaptotagmin 1-Membrane Interactions.

    Science.gov (United States)

    Katti, Sachin; Nyenhuis, Sarah B; Her, Bin; Srivastava, Atul K; Taylor, Alexander B; Hart, P John; Cafiso, David S; Igumenova, Tatyana I

    2017-06-27

    C2 domains are independently folded modules that often target their host proteins to anionic membranes in a Ca 2+ -dependent manner. In these cases, membrane association is triggered by Ca 2+ binding to the negatively charged loop region of the C2 domain. Here, we used a non-native metal ion, Cd 2+ , in lieu of Ca 2+ to gain insight into the contributions made by long-range Coulombic interactions and direct metal ion-lipid bridging to membrane binding. Using X-ray crystallography, NMR, Förster resonance energy transfer, and vesicle cosedimentation assays, we demonstrate that, although Cd 2+ binds to the loop region of C2A/B domains of synaptotagmin 1 with high affinity, long-range Coulombic interactions are too weak to support membrane binding of individual domains. We attribute this behavior to two factors: the stoichiometry of Cd 2+ binding to the loop regions of the C2A and C2B domains and the impaired ability of Cd 2+ to directly coordinate the lipids. In contrast, electron paramagnetic resonance experiments revealed that Cd 2+ does support membrane binding of the C2 domains in full-length synaptotagmin 1, where the high local lipid concentrations that result from membrane tethering can partially compensate for lack of a full complement of divalent metal ions and specific lipid coordination in Cd 2+ -complexed C2A/B domains. Our data suggest that long-range Coulombic interactions alone can drive the initial association of C2A/B with anionic membranes and that Ca 2+ further augments membrane binding by the formation of metal ion-lipid coordination bonds and additional Ca 2+ ion binding to the C2 domain loop regions.

  10. Electrochemical study of the increased antioxidant capacity of flavonoids through complexation with iron(II) ions

    International Nuclear Information System (INIS)

    Porfírio, Demóstenes Amorim; Ferreira, Rafael de Queiroz; Malagutti, Andréa Renata; Valle, Eliana Maíra Agostini

    2014-01-01

    Highlights: • Metal-Flavonoid complexes exhibit greater antioxidant capacity than the free flavonoid;. • Voltammetric profile is an additional information for determining antioxidant capacity;. • Pyrogallol group is a stronger complex-forming group than the catechol;. • Morin, quercetin and fisetin increased their antioxidant capacity in 15%, 32% and 28%, respectively. - Abstract: Flavonoids are polyphenolic compounds that act as natural antioxidants in the human body through various mechanisms, with an emphasis on suppressing reactive oxygen species (ROS) formation by inhibiting enzymes, the direct capture of ROS, and the regulation/protection of antioxidant defenses. Additionally, flavonoids can coordinate with transition metals to catalyze electron transport and promote free radical capture. Recently, metal ion chelation mechanisms have generated considerable interest, as experimental data show that flavonoids in metal complexes exhibit greater antioxidant activity than free flavonoids. However, few studies have correlated the complexing properties of flavonoids with their antioxidant capacity. Thus, the aim of this study was to use the CRAC (Ceric Reducing Antioxidant Capacity) electrochemical assay to measure the antioxidant capacity of five free flavonoids and Fe 2+ -flavonoid complexes. In addition, the interactions between the flavonoids and Fe 2+ were analyzed based on the oxidation peaks formed in their cyclic voltammograms

  11. THEORETICAL STUDY ON 15-CROWN-5 COMPLEX WITH SOME METAL CATIONS

    Directory of Open Access Journals (Sweden)

    Yahmin Yahmin

    2012-06-01

    Full Text Available The capability of 15-crown-5 ethers to form complexes with some metal cations (Li+, Na+, K+, Zn2+, Cd2+ and Hg2+ was investigated by an ab initio quantum mechanical method. The calculations were performed at the RHF/lanl2mb level of theory. The interaction energies were used to evaluate the metal binding capability of the crown ether. The effect of nature of the metal on the binding properties was also studied. The results of the calculations showed that the interaction energy of the complexes increased in proportion with the ratio of ion charge, electronegativity and ionization potential to the cation diameter. In addition, based on the extraction distribution coefficient in the gas phase, it is found that the 15-crown-5 could not extract metal cations investigated.

  12. Antimicrobial and thermal properties of metal complexes of grafted fabrics with acrylic acid by gamma irradiation

    International Nuclear Information System (INIS)

    Hassan, M.S.; Attia, R.M.; Zohdy, M.H.; Khalil, E.M.

    2009-01-01

    Cotton, cotton/ ET blend and PET fabrics were treated against microbial effect by radiation -induced grafting of acrylic acid followed by metal complexation with some divalent transition metal ions like Co (l l), Ni(l l) and Cu(l l).The microbial resistance was evaluated by testing the mechanical properties of the treated fabrics after burring for one and two weeks in a moist soil reach with microorganisms. Also, the structural damage of the fabrics caused by biodegradation was examined by scanning electron microscope (SEM). Moreover, the effect of this treatment on the thermal decomposition behaviour was investigated by thermogravimetric analysis (TGA). On the basis of microbial studies, it was found that the metal complexation of the grafted fabrics with acrylic acid enhanced the microbial resistance of the fabrics and the microbial resistance could be arranged according to the complexed metal ions as follows: copper> nickel> cobalt. Also, the thermal stability of different fabrics could be arranged as follow: grafted fabrics complexes with Cu (l l) grafted fabrics complexes with Co (l l)

  13. Antimicrobial and Thermal Properties of Metal Complexes of Grafted Fabrics with Acrylic Acid by Gamma Irradiation

    International Nuclear Information System (INIS)

    Hassan, M.S.; Attia, R.M.; Zohdy, M.H.

    2008-01-01

    Cotton, cotton/PET blend and PET fabrics were treated against microbial effect by radiation - induced grafting of acrylic acid followed by metal complexation with some divalent transition metal ions Co (II), Ni (II) and Cu (II). The microbial resistance was evaluated by testing the mechanical properties of the treated fabrics after burring for one and two weeks in a moist soil reach with microorganisms. Also, the growth of microorganisms was examined by scanning electron microscope (SEM). Moreover, the effect of this treatment on the thermal decomposition behavior was investigated by thermogravimetric analysis (TGA). On the basis of microbial studies, it was found that the metal complexation of the grafted fabrics with acrylic acid enhanced the antimicrobial resistance of the fabrics and the antimicrobial resistance could be arranged according to the metal ions as follows: copper> nickel> cobalt. Also, the thermal stability of different fabrics could be arranged as follow: grafted fabrics complexed with Cu (II) > grafted fabrics complexed with Ni (II) > grafted fabrics complexed with Co (II)

  14. Visualization of complex DNA damage along accelerated ions tracks

    Science.gov (United States)

    Kulikova, Elena; Boreyko, Alla; Bulanova, Tatiana; Ježková, Lucie; Zadneprianetc, Mariia; Smirnova, Elena

    2018-04-01

    The most deleterious DNA lesions induced by ionizing radiation are clustered DNA double-strand breaks (DSB). Clustered or complex DNA damage is a combination of a few simple lesions (single-strand breaks, base damage etc.) within one or two DNA helix turns. It is known that yield of complex DNA lesions increases with increasing linear energy transfer (LET) of radiation. For investigation of the induction and repair of complex DNA lesions, human fibroblasts were irradiated with high-LET 15N ions (LET = 183.3 keV/μm, E = 13MeV/n) and low-LET 60Co γ-rays (LET ≈ 0.3 keV/μm) radiation. DNA DSBs (γH2AX and 53BP1) and base damage (OGG1) markers were visualized by immunofluorecence staining and high-resolution microscopy. The obtained results showed slower repair kinetics of induced DSBs in cells irradiated with accelerated ions compared to 60Co γ-rays, indicating induction of more complex DNA damage. Confirming previous assumptions, detailed 3D analysis of γH2AX/53BP1 foci in 15N ions tracks revealed more complicated structure of the foci in contrast to γ-rays. It was shown that proteins 53BP1 and OGG1 involved in repair of DNA DSBs and modified bases, respectively, were colocalized in tracks of 15N ions and thus represented clustered DNA DSBs.

  15. Hydration number of alkali metal ions determined by insertion in a conducting polymer

    DEFF Research Database (Denmark)

    Skaarup, Steen

    2008-01-01

    In aqueous solutions, the alkali metals ions are associated with a number of H2O molecules. A distinction is made between a primary solvent shell, (or inner solvation shell), consisting of H2O molecules directly coordinated to the metal ion, and a secondary (or outer) solvation shell, consisting....... The solvation of alkali metal ions has been discussed for many years without a clear consensus. This work presents a systematic study of the hydration numbers of the 5 alkali metal ions, using the electrochemical insertion of the ions in a conducting polymer (polypyrrole containing the large immobile anion DBS...

  16. Extended X-ray absorption fine structure investigation of adsorption and separation phenomena of metal ions in organic resin.

    Science.gov (United States)

    Ikeda, Atsushi; Yaita, Tsuyoshi; Okamoto, Yoshihiro; Shiwaku, Hideaki; Suzuki, Shinichi; Suzuki, Tatsuya; Fujii, Yasuhiko

    2007-11-01

    Analytical technique using organic resins has already been well-developed, and its applications are employed in various fields; nevertheless, the chemical phenomena occurring inside the resin remain unclear for the most part. In the present study, we apply EXAFS spectroscopy to elucidate the adsorption and separation phenomena of metal ions by organic resin. That is, the chemical species of trivalent lanthanides (Ln(III)) adsorbed in a tertiary pyridine resin from hydrochloric acid and nitric acid solutions have been determined by EXAFS. The results in HCl solutions suggest that Ln(III) ions are partly dehydrated in the resin phase, enabling the pyridine groups of the resin and chloride ions to coordinate to the Ln(III) ions in their primary coordination sphere. On the other hand, Ln(III) ions are tightly coordinated by several nitrate ions in HNO3 solutions and they keep forming the nitrate complex even in the resin phase. The lighter Ln of Nd tends to form an anionic nitrate complex, [Nd(NO3)4.nH2O]-, in the resin phase, while the middle Ln of Sm exists as a cationic nitrate complex, [Sm(NO3)2.nH2O]+, for the most part. On the basis of these EXAFS results, the adsorption and separation mechanisms of the pyridine resin in HCl solutions are interpreted as the direct coordination of pyridine groups to metal ions, while the mechanisms in HNO3 solutions are mainly dominated by the anion-exchange reaction between the protonated pyridine groups and the anionic nitrate complexes of Ln(III). The obtained results demonstrate that the hydration of metal ions weakens, and instead, other complexations are enhanced in the resin phase.

  17. Endonuclease active site plasticity allows DNA cleavage with diverse alkaline Earth and transition metal ions.

    Science.gov (United States)

    Vasu, Kommireddy; Saravanan, Matheshwaran; Nagaraja, Valakunja

    2011-09-16

    A majority of enzymes show a high degree of specificity toward a particular metal ion in their catalytic reaction. However, Type II restriction endonuclease (REase) R.KpnI, which is the first member of the HNH superfamily of REases, exhibits extraordinary diversity in metal ion dependent DNA cleavage. Several alkaline earth and transition group metal ions induce high fidelity and promiscuous cleavage or inhibition depending upon their concentration. The metal ions having different ionic radii and co-ordination geometries readily replace each other from the enzyme's active site, revealing its plasticity. Ability of R.KpnI to cleave DNA with both alkaline earth and transition group metal ions having varied ionic radii could imply utilization of different catalytic site(s). However, mutation of the invariant His residue of the HNH motif caused abolition of the enzyme activity with all of the cofactors, indicating that the enzyme follows a single metal ion catalytic mechanism for DNA cleavage. Indispensability of His in nucleophile activation together with broad cofactor tolerance of the enzyme indicates electrostatic stabilization function of metal ions during catalysis. Nevertheless, a second metal ion is recruited at higher concentrations to either induce promiscuity or inhibit the DNA cleavage. Regulation of the endonuclease activity and fidelity by a second metal ion binding is a unique feature of R.KpnI among REases and HNH nucleases. The active site plasticity of R.KpnI opens up avenues for redesigning cofactor specificities and generation of mutants specific to a particular metal ion.

  18. Metal-ion dependent catalytic properties of Sulfolobus solfataricus class II α-mannosidase

    DEFF Research Database (Denmark)

    Nielsen, Jonas Willum; Poulsen, Nina Rødtness; Johnsson, Anna Margit Susanne

    2012-01-01

    residues. Recently, evidence has accumulated that class II α-mannosidase is active in complex with a range of divalent metal ions. In the present work, with employment of the class II α-mannosidase, ManA, from the hyperthermophilic archaeon Sulfolobus solfataricus, we explored the influence of the divalent...

  19. FIRST-ROW TRANSITION METAL COMPLEXES OF OMEPRAZOLE AS ANTI-ULCERATIVE DRUGS

    Directory of Open Access Journals (Sweden)

    Suman Malik

    2010-12-01

    Full Text Available Omeprazole (OME is a proton pump inhibitor (PPI. PPIs have enabled to improve the treatment of various acid-peptic disorders. OME is a weak base and it can form several complexes with transition and non-transition metal ions. In the present paper, we are describing series of transition metal complexes of omeprazole i.e., 5-methoxy-2[(4methoxy-3, 5dimethyl-2-pyridinyl methylsulfinyl]-1H-benzimidazole with CuII, MnII, CoII, NiII, FeII, ZnII and HgII. These complexes were characterized by elemental analysis, molar conductivity, IR, NMR, magnetic susceptibility, UV-visible spectral studies, ESR, SEM and X-ray diffraction. Based on the above studies, the ligand behaves as bidentate O, N donor and forms coordinate bonds through C=N and S=O groups. The complexes were found to non-electrolytic in nature on the basis of low values of molar conductivity. Analytical data and stoichiometry analysis suggest ligand to metal ratio of 2:1 for all the complexes. Electronic spectra and magnetic susceptibility measurements reveal octahedral geometry for Mn(II,Co(II, Ni(II,Fe(II and Cu(II complexes and tetrahedral for Hg(II and Zn(II complexes. Ligands and their metal complexes have been screened for their antibacterial and antifungal activities against bacteria Pseudomonas, Staphylococcus aureus and fungi Aspergillus niger and A. flavous.

  20. Structural and Spectral Properties of Curcumin and Metal- Curcumin Complex Derived from Turmeric (Curcuma longa)

    Science.gov (United States)

    Bich, Vu Thi; Thuy, Nguyen Thi; Binh, Nguyen Thanh; Huong, Nguyen Thi Mai; Yen, Pham Nguyen Dong; Luong, Tran Thanh

    Structural and spectral properties of curcumin and metal- curcumin complex derived from turmeric (Curcuma longa) were studied by SEM and vibrational (FTIR and Raman) techniques. By comparison between curcumin commercial, fresh turmeric and a yellow powder obtained via extraction and purification of turmeric, we have found that this insoluble powder in water is curcumin. The yellow compound could complex with certain ion metal and this metal-curcumin coloring complex is water soluble and capable of producing varying hues of the same colors and having antimicrobial, cytotoxicity activities for use in foodstuffs and pharmacy. The result also demonstrates that Micro-Raman spec-troscopy is a valuable non-destructive tool and fast for investigation of a natural plant even when occurring in low concentrations.

  1. Synthesis and characterization of transition metal complexes ...

    African Journals Online (AJOL)

    Basing on the above data, Fe(II) and Co(II) complexes of HMCFCH and HMPFCH have been assigned a dimeric octahedral geometry. VO(II) complexes of HMCFCH and HMPFCH have been assigned sulfate bridged dimeric square pyramidal geometry. Mn(II) complex of HMCFCH has been assigned a dimeric octahedral ...

  2. Modification of solid surface by intense pulsed light-ion and metal-ion beams

    Science.gov (United States)

    Nakagawa, Y.; Ariyoshi, T.; Hanjo, H.; Tsutsumi, S.; Fujii, Y.; Itami, M.; Okamoto, A.; Ogawa, S.; Hamada, T.; Fukumaru, F.

    1989-03-01

    Metal surfaces of Al, stainless-steel and Ti were bombarded with focused intense pulsed proton and carbon ion beams (energy ˜ 80 keV, current density ≲ 1000 A/cm 2, pulse width ˜ 300 ns). Thin titanium carbide layers were produced by carbon-ion irradiation on the titanium surface. The observed molten surface structures and recrystallized layer (20 μm depth) indicated that the surfaces reached high temperatures as a result of the irradiation. The implantation of intense pulsed metal ion beams (Al +, ˜ 20 A/cm 2) with simultaneous deposition of anode metal vapor on Ti and Fe made a mixed layer of AlTi and AlFe of about 0.5 μm depth. Ti and B multilayered films evaporated on glass substrates were irradiated by intense pulsed proton beams of relatively lower current density (10-200 A/cm 2). Ti films containing B atoms above 10 at.% were obtained. When the current density was about 200 A/cm 2 diffraction peaks of TiB 2 appeared.

  3. Formation of negative ions on a metal surface

    International Nuclear Information System (INIS)

    Amersfoort, P.W. van.

    1987-01-01

    In this thesis a fundamental study of the charge exchange process of positive ions on the converter surface is presented. Beams of hydrogen ad cesium ions are scattered from a thoroughly cleaned W(110) surface, under ultra-high vacuum conditions. The cesium coverage of the surface is a controlled parameter. Ch. 2 deals with the negative-ion formation probability for hydrogen atoms. The influence of coabsorption of hydrogen is studied in Ch. 3. These measurements are important for understanding the formation process in plasma sources, because the converter surface is expected to be strongly contaminated with hydrogen. The charge state of scattered cesium particles is investigated in Ch. 4. Knowledge of this parameter is essential for Ch. 5, in which a model study of adsorption of cesium on a metal surface in contact with a plasma is presented. Finally, the negative-ion formation process in a plasma environment is studied in Ch. 6. Measurements done on a hollow-cathode discharge equipped with a novel type of converter, a porous tungsten button, are discussed. Liquid cesium diffuses through this button towards the side in contact with the plasma. (Auth.)

  4. Metal-organic frameworks for lithium ion batteries and supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Ke, Fu-Sheng; Wu, Yu-Shan; Deng, Hexiang, E-mail: hdeng@whu.edu.cn

    2015-03-15

    Porous materials have been widely used in batteries and supercapacitors attribute to their large internal surface area (usually 100–1000 m{sup 2} g{sup −1}) and porosity that can favor the electrochemical reaction, interfacial charge transport, and provide short diffusion paths for ions. As a new type of porous crystalline materials, metal-organic frameworks (MOFs) have received huge attention in the past decade due to their unique properties, i.e. huge surface area (up to 7000 m{sup 2} g{sup −1}), high porosity, low density, controllable structure and tunable pore size. A wide range of applications including gas separation, storage, catalysis, and drug delivery benefit from the recent fast development of MOFs. However, their potential in electrochemical energy storage has not been fully revealed. Herein, the present mini review appraises recent and significant development of MOFs and MOF-derived materials for rechargeable lithium ion batteries and supercapacitors, to give a glimpse into these potential applications of MOFs. - Graphical abstract: MOFs with large surface area and high porosity can offer more reaction sites and charge carriers diffusion path. Thus MOFs are used as cathode, anode, electrolyte, matrix and precursor materials for lithium ion battery, and also as electrode and precursor materials for supercapacitors. - Highlights: • MOFs have potential in electrochemical area due to their high porosity and diversity. • We summarized and compared works on MOFs for lithium ion battery and supercapacitor. • We pointed out critical challenges and provided possible solutions for future study.

  5. N-acyl thioureas - selective ligands for complexing of heavy metals and noble metals

    International Nuclear Information System (INIS)

    Schuster, M.

    1992-01-01

    Acyl thioureas are complexing agents for heavy metals that are easily produced and very stable. Their favourable toxicological data make them particularly suitable for industrial applications, e.g. detoxification of metallic process solutions or solvent extraction of metals. (orig.) [de

  6. Low jitter metal vapor vacuum arc ion source for electron beam ion trap injections

    International Nuclear Information System (INIS)

    Holland, Glenn E.; Boyer, Craig N.; Seely, John F.; Tan, J.N.; Pomeroy, J.M.; Gillaspy, J.D.

    2005-01-01

    We describe a metal vapor vacuum arc (MeVVA) ion source containing eight different cathodes that are individually selectable via the control electronics which does not require moving components in vacuum. Inside the vacuum assembly, the arc plasma is produced by means of a 30 μs pulse (26 kV,125 A) delivering 2.4 mC of charge to the cathode sample material. The trigger jitter is minimized ( 9 ions/cm 2 , measured by an unbiased Faraday cup positioned 20 cm from the extractor grid, at discharge rates up to 5 Hz. The electronic triggering of the discharge is via a fiber optic interface. We present the design, fabrication details, and performance of this MeVVA, recently installed on the National Institute of Standards and Technology electron beam ion trap (EBIT)

  7. Reactivity of monoolefin ligand in transition metal complexes

    International Nuclear Information System (INIS)

    Rybinskaya, M.I.

    1978-01-01

    The main tendencies in the coordinated olefin ligand property changes are discussed in the transition metal complexes in comparison with free olefins. The review includes the papers published from 1951 up to 1976. It has been shown that in complexes with transition metal cations olefin π-base acquires the ability to react with nucleophylic reagents. Olefin π-acids in complexes with zero valent metals are easily subjected to electrophylic reagent action. At coordination with transition metal cations the olefin properties are generally preserved, while in the zero-valent metal complexes the nonsaturated ligand acquires the properties of a saturated compounds. The ability of transition metal cations in complexes to intensify reactions of nucleophylic bimolecular substitution of vinyl halogen is clearly detected in contrast to the zero valent metal complexes. It has been shown that investigations of the coordinated olefin ligand reactivity give large possibilities in the further development of the organic synthesis. Some reactions are taken as the basis of important industrial processes

  8. Measuring free metal ion concentrations in situ in natural waters using the Donnan Membrane Technique

    NARCIS (Netherlands)

    Kalis, E.J.J.; Weng, L.P.; Dousma, F.; Temminghoff, E.J.M.; Riemsdijk, van W.H.

    2006-01-01

    Metal toxicity is not related to the total but rather to the free or labile metal ion concentration. One of the techniques that can be used to measure several free metal ion concentrations simultaneously is the Donnan Membrane Technique (DMT) in combination with the inductively coupled plasma-mass

  9. PHENOL OXIDATION USING NATURAL ZEOLITE SUPPORTED METAL ION CATALYST

    Directory of Open Access Journals (Sweden)

    Sri Wardhani

    2010-06-01

    Full Text Available Phenol which contained in waste water has to be reduced and it could be done by oxygen oxidation.  In order to increase the rate of reaction it was needed a catalyst. In this research the capability of various catalysts, namely zeolite-Zn(II, zeolite-Cu(II and zeolite-Co(IIin oxidation of phenol has been investigated. The aim of this research was to study the type of metal ion catalyst towards the percentage of oxidated phenol. The oxidation process were carried out in an aqueous phenol of 100 ppm with oxygen flow rate of 200 mL/min. in the presence of catalysts with 0.2M of initial impregnation concentration. The capabilities of catalysts were performed by calculating the activation energy and it was done at two different temperatures, i.e. 70 and 90 oC. The percentage of oxidated phenol was determinated by measuring its concentration using UV-VIS spectrophotometer. In addition, the impregnated metal was calculated by measuring the ion concentration remains in the filtrate solution and it was determined using Atomic Absorption Spectrophotometer. The results showed that metal ion types affected the catalytic activity. The order of phenol oxidationactivity decreased as Co(II > Cu(II > Zn(II. The surface characteristics of catalysts were supported by pore volume and pore diameter i.e 0.009 cm3/g and 16.59 Å for Zn(II whereas specific surface area was 10.32 m2/g for Zn(II, 0.004 cm3/g and 24.37 Å for Cu(II whereas specific surface area was 3.57 m2/g for Cu(II, 0.001 cm3/g and 19.63 Å for Co(II whereas specific surface area was 10.26m2/g for Co(II.   Keywords: phenol,natural zeolite, catalyst, oxidation

  10. Local coordination of polyvalent metal ions in molten halide mixtures

    International Nuclear Information System (INIS)

    Akdeniz, Z.; Tosi, M.P.

    1989-07-01

    Ample experimental evidence is available in the literature on the geometry and the stability of local coordination for polyvalent metal ions in molten mixtures of their halides with alkali halides. Recent schemes for classifying this evidence are discussed. Dissociation of tetrahedral halocomplexes in good ionic systems can be viewed as a classical Mott problem of bound-state stability in a conducting matrix. More generally, structural coordinates can be constructed from properties of the component elements, to separate out systems with long-lived fourfold or sixfold coordination and to distinguish between these. (author). 11 refs, 1 fig

  11. Studies on the dryolysis reactions of metal ions

    International Nuclear Information System (INIS)

    Baes, C.F. Jr.

    1977-01-01

    Research is reported on metallic ions produced in solutions at low concentrations as mononuclear hydrolysis products. The method for studying the mononuclear species is to measure the solubility of the oxide or hydroxide solid phase that is stable under the conditions of interest. Column solubility measurements of Al(OH) 3 (Gibbsite) in NaCl solution as a function of pH, temperature, and ionic strength are being conducted in order to better establish the stability of the intermediate species Al(OH) 2 + and Al(OH) 3 (aq)

  12. Comparison of some preconcentration methods for certain metal ions in human milk and yogurts

    Directory of Open Access Journals (Sweden)

    E. Ibitoye

    2003-06-01

    Full Text Available Five samples each of yogurts and human milk were separately collected, deproteinized, pre-concentrated differently with 1% 8-hydroxyquinoline, 1% ammonium pyrrolidine-dithiocarbamate (APDC and extracted with methyl-isobutylketone (MIBK. Activated carbon powder in HNO3 was also used. The extracts obtained were analyzed using atomic absorption spectrometry for some metal ions. In yogurts, the powdered activated carbon in HNO3 exhibited the highest complexing ability with values of 0.04–0.17, 335–476, 1.52–3.82, 0.08–0.27, 0.09–0.28, 1.31–8.78 and 888–12693 mg/L concentration for Zn2+, Mg2+, Mn2+, Cr3+, Cu2+, Fe3+ and Ca2+, respectively. The concentrations of Zn2+, Mg2+, Mn2+, Cr3+, Cu2+, Fe3+ and Ca2+ ions were determined to be in the range of 0.02–0.03, 1.10–9.47, 0.05–0.11, 0.02–3.08, 0.01–0.87, 0.47–18.08, <0.01–278 mg/L, respectively, for APDC/MIBK extraction method. The complexing ability of APDC/MIBK appeared to be the lowest. The Co3+ and Cd2+ ions were only detected by activated carbon pre-concentration method. A more or less similar trend was obtained for human milk samples. For all samples, the complexing ability of each of the complexing agents varied from one metal ion to another.

  13. Isolation of humic acid from oxidized lignite and complexation with metal cations

    Directory of Open Access Journals (Sweden)

    Ćatović Benjamin

    2017-01-01

    Full Text Available Lignite is brown coal, which in its composition contains humic acids. Humic acids are produced by coal combustion, which leads to the enrichment of coal humic acids. Lignite, from the opet pit mine Šikulje, lignite ore „Kreka“, Bosnia and Herzegovina, was fragmented and sieved to the appropriate size and used as a base material. The isolation of humic acid was carried out from pre-oxidized and dried lignite after which it was refined. Identification thus obtained humic acids was carried out by FTIR spectroscopy and its characterization of UV analysis which is determined by optical density of isolated humic acid and its complexation with metal cations. Data obtained by FTIR spectroscopic analysis of isolated humic acids show no significant structural and chemical difference in relation to the spectrum obtained for standard humic acids (Sigma Aldrich. UV analysis showed that isolated and standard humic acid have E4/E6 ratio in an appropriate range of 3–5, which indicates the presence of a large number of aliphatic structure. Based on the degree of humification was found that the isolated humic acids belong to the type B standard while humic acids belong to type A. The most important property of the humic substances is the ability to interact with the metal ions forming soluble or insoluble complexes which possess different chemical and biological properties and stability. The nature of the complex between humic acid and metal cation derived from the heterogeneous, polyelectric and polydispersive character humic acids that occurs due to the presence of a large number of functional groups. Complexation of humic acid is carried out with different concentrations of metal nitrate solutions and at different pH values. Different amounts of humic acids were used for the complexation. The amount of the free metal ions was measured with the ICP-OES methode. The data were also statistically analyzed with ANOVA. The results showed that increasing the p

  14. Dominance of metallothionein in metal ion buffering in yeast capable of synthesis of (gamma EC)nG isopeptides.

    Science.gov (United States)

    Yu, W; Santhanagopalan, V; Sewell, A K; Jensen, L T; Winge, D R

    1994-08-19

    The relationship of yeast metallothionein (MT) and (gamma EC)nG isopeptides (phytochelatins) in metal ion buffering was assessed. The effect of constitutive expression of yeast metallothionein (MT) genes on accumulation of metal-(gamma EC)nG isopeptide (phytochelatin) complexes was analyzed in Candida glabrata and Schizosaccharomyces pombe cultures incubated in the presence of cadmium salts. Constitutive expression of the Saccharomyces cerevisiae MT (CUP1) gene inhibited the accumulation of metal-phytochelatin complexes in both C. glabrata and S. pombe. Intracellular Cd(II) sequestration occurred by formation of CdMT complexes. Phytochelatin (gamma EC)nG complexes appear to function in metal buffering in cells when MT genes are not present or expressed. A third condition in which metal-(gamma EC)nG complexes are observed is when constitutively expressed MT does not accumulate. We observed that C. glabrata lacking the AMT1 gene necessary for copper induction of the MT genes expressed MTII constitutively, but this expression does not lead to CdMTII accumulation. Only Cd-(gamma EC)nG complexes accumulate. Likewise, metal exposed cultures of S. cerevisiae (cup1) transformed with C. glabrata MTII under the constitutive ADH1 promoter resulted in constitutive expression of MTII and accumulation of CuMTII complexes but no CdMTII complexes. The inability of constitutively expressed C. glabrata MTII to buffer Cd(II) ions may arise in part from an inherent kinetic lability of CdMTII complexes. Incubation of ZnMTII with a metallochromic chelator, 4-(2-pyridylazo)resorcinol resulted in greater Zn(II) loss than Zn(II) complexes with CUP1 MT and C. glabrata MTI. C. glabrata MTII appears to be the first MT described which forms an unstable Cd(II) complex.

  15. Metal ion interaction of an oligopeptide fragment representing the regulatory metal binding site of a CueR protein

    DEFF Research Database (Denmark)

    Jancsó, Attila; Szokolai, Hajnalka; Roszahegyi, Livia

    2013-01-01

    Metalloregulatory proteins of the MerR family are transcriptional activators that sense/control the concentration of various metal ions inside bacteria.1 The Cu+ efflux regulator CueR, similarly to other MerR proteins, possesses a short multiple Cys-containing metal binding loop close to the C......-terminus. CueR has a high selectivity for Cu+, Ag+ and Au+, but exhibits no transcriptional activity for the divalent ions Hg2+ and Zn2+.2 The two Cys- residues of the metal binding loop were shown to settle M+ ions into a linear coordination environment but other factors may also play a role in the recognition...... of cognate metal ions.2 Nevertheless, it is an interesting question whether the same sequence, when removed from the protein, shows a flexibility to adopt different coordination environments and may efficiently bind metal ions having preferences for larger coordination numbers....

  16. The controlled release of insulin-mimetic metal ions by the multifunction of chitosan.

    Science.gov (United States)

    Kofuji, Kyoko; Qian, Chun-Jun; Murata, Yoshifumi; Kawashima, Susumu

    2005-06-01

    Vanadium, which is an insulin-mimetic metal ion, was efficiently adsorbed on chitosan (CS). The adsorption of vanadium on CS was affected by the vanadium/CS ratio and the initial concentration of vanadium in preparative medium under constant pH condition. The vanadium-CS complex was able to control vanadium release. Moreover, a consistent control of vanadium release was achieved by incorporation of the vanadium-CS complex into a CS gel. After implantation of the CS gel retaining the vanadium-CS complex into diabetic mice, insulin-mimetic efficacy was confirmed by observation of a steady reduction in blood glucose levels. The sustained vanadium release also contributed to minimization of the side-effects. Thus, CS gel retaining the vanadium-CS complex appears promising as a vehicle for vanadium with long-term action and a low toxicity leading to its clinical use.

  17. New trends for metal complexes with anticancer activity

    NARCIS (Netherlands)

    Bruijnincx, P.C.A.; Sadler, Peter J.

    2008-01-01

    Medicinal inorganic chemistry can exploit the unique properties of metal ions for the design of new drugs. This has, for instance, led to the clinical application of chemotherapeutic agents for cancer treatment, such as cisplatin. The use of cisplatin is, however, severely limited by its toxic

  18. Bovine Serum Albumin Metal Complexes for Mimic of SOD

    Indian Academy of Sciences (India)

    Proteins are well-known for efficiency and selecti- vity that few other natural or artificial molecules can match,24,25 whether in catalysis or molecular recogni- tion. Owing to 35 cysteine residues, human serum albu- min (HSA) is facile to be combined with metal ions. The serum albumin is readily available, non-antigenic.

  19. 3d-METAL COMPLEXES WITH BARBITURIC ACID DERIVATIVES

    Directory of Open Access Journals (Sweden)

    T. V. Koksharova

    2015-04-01

    Full Text Available The various aspects of the 3d-metal complexes with barbiturates and uric acid chemistry such as composition, structure, physicochemical properties, possible fields of application – have been illustrated in this review

  20. Thiosemicarbazone complexes of the platinum metals. A story of ...

    Indian Academy of Sciences (India)

    Unknown

    membered chelate rings; molecular modelling; five-membered chelate ring. 1. Introduction. The chemistry of transition metal complexes of thiosemicarbazones has been receiving considerable attention largely because of their pharmacological ...