PENGARUH ORIENTASI PASAR TERHADAP KEUNGGULAN BERSAING MELALUI INOVASI PADA UKM BIDANG FURNITURE DI KOTA SEMARANG

Directory of Open Access Journals (Sweden)

Sendhang Nurseto

2016-02-01

Full Text Available One of the small and medium enterprises in the city of Semarang is the field of furniture and furniture . Furniture or furniture that is often referred to as a product included in the household so that the furniture is not the scarce goods but is needed by the community . Realization of production every year to reach an average of only 90 % of the target . The resulting production also fluctuated every year , almost every year has decreased . The purpose of this study was to determine the effect of market orientation and innovation to compete SMEs lead with furniture in the city of Semarang . The population in this study was 64 furniture craftsman whose products have been exported to SMEs furniture Semarang . Way of selecting a sample ( respondents were used in this study using nonprobability sampling technique. Analysis using quantitative , qualitative analysis , validity , reliability testing , path analysis , descriptive analysis and differential analysis . The results showed t value of the variable effect of market orientation on innovation by 3.690 , the hypothesis 1 ( H1 that the Market Orientation proven positive effect on innovation . T value of the variable effect of market orientation on Competitive Advantage of 2,079 > t Table , hypothesis 2 ( H2 that the positive effect on market orientation Competitive Advantage proven . T value of the variable influence of Innovation for Competitive Advantage 3.332 > t table , the hypothesis 3 ( H3 that innovation has a positive effect on Competitive Advantage proven . Calculated F value of the variable influences Market Orientation and Innovation for Competitive Advantage by 9.396 > F table , hypothesis 4 ( H4 that the Market Orientation and Innovation positive effect on Competitive Advantage proven . Craftsmen will need to improve understanding of market orientation in the face of competition . Owned and increase innovation to improve the ability and skill to produce a better product thus

Fellin Furniture - disainitud kasutamiseks

Index Scriptorium Estoniae

2010-01-01

Viljandis asuvast mööbliettevõttest Fellinn Furniture ja seal valmistatavast mööblist. Kollektsiooni algsed loojad on disainerid Sixten Heidmets ja Sirli Ehari. Disainis on kasutatud elemente, mis võimaldavad toodete väljanägemist kergesti muuta ja hõlpsasti ruumis paigutada. Valmistatakse ka uusi tooteid, mille disainimisele on kaasa aidanud kogu Fellin Furniture meeskond

Internationalisation of the Malaysian Wooden Furniture Industry

OpenAIRE

Zhao, LiXu

2016-01-01

Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

Impact of Imported Chinese Furniture on The Local Furniture Sector in Arusha City, Tanzania: Focusing on the Strategies of Furniture-Makers for Using Indigenous Timber Species

OpenAIRE

OGAWA, Sayaka

2018-01-01

The aim of this paper is to elucidate the strategies used by Tanzanian furnituremakers to deal with price competition from Chinese imported furniture by examining the changes in the local use of timber, which is becoming scarce due to destructive harvesting. Chinese furniture flowing into Tanzania is not only of a fashionable design but it is also cheap because it is constructed from low-quality timber and alternative materials. Small-scale Tanzanian furniture-makers operate their business ba...

Emission of formaldehyde from furniture

DEFF Research Database (Denmark)

Andersen, Helle Vibeke; Klinke, Helene B.; Funch, Lis Winther

The emission of formaldehyde from 20 pieces of furniture, representing a variety of types, was measured in climate chambers. Most tests show low emissions but certain scenarios of furnishing, including furniture with large surface areas in relation to room volume can emit formaldehyde resulting...

METHODS FOR DETERMINING THE AESTHETIC APPEAL OF FURNITURE

Directory of Open Access Journals (Sweden)

Mária Réka ANTAL

2016-03-01

Full Text Available The world of furniture market is getting more and more complex than it was before. In recent years the habits of buying furniture have changed. The fabrication of individual pieces of furniture is increasingly coming to the front. A personal contact is being established between the customer and the furniture, which is a relationship of one product to one customer. In order to satisfy the individual demands, higher prices and higher quality are needed. The competition is beginning at the market and emotion plays an important role in it. Therefore, functionality and aesthetic functions, determinative forms, fashionable style play a very important role in furniture design and production. Some methods are presented such as RMQD or FMEA used for determining aesthetics of furniture.

Survey of metals on antimicrobial and deodorant agents in household Necessities; Mukikei kokinsei kakoseihin no shiyojittai

Energy Technology Data Exchange (ETDEWEB)

Kan, Teruo

1999-11-01

It measured the metal bearing quantity in household necessities in order to clarify use actual condition of the metal system drug. And, it tried the detection of the drug used from detected metal. Too there is the report until now in the investigation of the metallic element in household necessities. However, metals examined this time are silver and zinc, four of copper and aluminum that it says that it has the antimicrobial action and is Key element of inorganic system antimicrobial agent. And, it carried out the analysis by inductive coupling plasma emission analysis method, after the wet digestion of the sample was done. (NEDO)

Furniture for a Technology-Infused School.

Science.gov (United States)

Fickes, Michael

1998-01-01

Discusses how one New Mexico school district weighed the choices in selecting and purchasing computer furniture for its classrooms. The purchasing process is described, as well as the types of, and reasons for, the furniture bought. (GR)

Consumer Behaviour Model on the Furniture Market

Directory of Open Access Journals (Sweden)

BEDNÁRIK, Éva

2010-01-01

Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

75 FR 80528 - Wooden Bedroom Furniture From China

Science.gov (United States)

2010-12-22

... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

Marketing Hardwoods to Furniture Producers

Science.gov (United States)

Steven A. Sinclair; Robert J. Bush; Philip A. Araman

1989-01-01

This paper discusses some of the many problems in developing marketing programs for small wood products manufacturers. It examines the problems of using price as a dominant means for getting and attracting customers. The marketing of hardwood lumber to furniture producers is then used as an example. Data from 36 furniture lumber buyers is presented to illustrate...

DESAIN FURNITURE PADA LABORATORIUM PENDIDIKAN SENI RUPA

Directory of Open Access Journals (Sweden)

Agus Nursalim

2016-04-01

Full Text Available Permasalahan dalam penelitian ini adalah bagaimana membuat desain furniture yang memenuhi standard Antrophometry dan Ergonomy untuk Laboratorium Pendidikan Seni Rupa. Penelitian mengkaji tingkat kenyamanan furniture yang dipakai mahasiswa ketika sedang praktikum di studio. Penelitian dilakukan dengan tujuan untuk mengenai standard kenyamanan pembutan desain furniture yang akan digunakan mahasiswa sebagai perlengkapan praktikum pada laboratorium Pendidikan Seni. Bentuk Penelitian ini adalah penelitian diskriftif dengan metode kwalitatif. Temuan awal dalam penelitian ini adalah: dimensi ergonomics dan antropometrics mahasiswa pendidikan seni rupa memiliki nilai X(mean masih dibawah standard International (rekomendasi: Dreyfuss dalam buku “:The Measure of Man” dengan standard deviasi 1.96 dengan persentil 2.5 dan persentil 97.5 masih dalam batas normal (Data Tabel 4.7 dan Tabel 4.8: dimensi antropomotrics mahasiswa Angkatan 20122013. Centre of grafity atau moment of grafity mahasiswa ketika praktikum dengan duduk bertumpu pada pantat dan daerah kerja normal pada rentang 72.4-87.5. Sedangkan mahasiswa yang melakukan praktikum dengan berdiri bertumpu pada kaki dengan angular motion dan siku bebas bergerak (SBB pada rentang 183.92212.9 (data Tabel 4.2-Tabel 4.5:Data Ergonomi Mahasiswa Angkatan 2012-2013 sesuai dengan rekomendasi C.G. Drury dalam „Journal Apllied Ergonomics’. Vol.13, p.135. masih dalam tingkat nyaman. Hasil temuan ini kemudian digunakan sebagai pertimbangan awal dalam membuat desain Furniture pada studio Pendidikan Seni Rupa. Dengan demikian mahasiswa merasakan kenyamanan dalam melakukan praktikum di Studio Pendidikan Seni Rupa dengan menggunakan furniture yang ada. Untuk itu furniture harus didesain yang adjustable. Kenyamanan Furniture berpengaruh signifikan terhadap prestasi mahasiswa. Desain furniture yang dibuat Adjustable diantaranya etsel untuk melukis, Meja kerja studio dasar, Kursi kerja untuk melukis, meja putar pada

Metals recovery of spent household batteries using a hydrometallurgical process

International Nuclear Information System (INIS)

Souza, K.P.; Tenorio, J.A.S.

2010-01-01

The objective of the work is to study a method for metals recovery from a sample composed by a mixture of the main types of spent household batteries. Segregation of the main metals is investigated using a treatment route consisting of the following steps: manual identified and dismantling, grinding, electric furnace reduction, acid leaching and selective precipitation with sodium hydroxide with and without hydrogen peroxide. Before and after precipitations the solutions had been analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP/OES) and the precipitated analyzed by Scanning Electron Microscopy (SEM) with Spectrometry of Energy Dispersion Spectroscopy (EDS). The results had indicated that the great majority of metals had been precipitated in pHs studied, also had co-precipitation or simultaneous precipitation of metals in some pHs. (author)

Factors influencing the, selection of state office furniture

Science.gov (United States)

R. Bruce Anderson; R. Bruce Anderson

1973-01-01

Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

The Impact of Clustering on the Innovativeness Of Furniture Industry

Directory of Open Access Journals (Sweden)

Grzegorzewska Emilia

2014-06-01

Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

Directory of Open Access Journals (Sweden)

F. Li

2016-06-01

Full Text Available Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i acquirement of prior-knowledge, (ii pole extraction, (iii components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

Pole-Like Street Furniture Decompostion in Mobile Laser Scanning Data

Science.gov (United States)

Li, F.; Oude Elberink, S.; Vosselman, G.

2016-06-01

Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A novel street furniture decomposition method is proposed, which consists of three steps: (i) acquirement of prior-knowledge, (ii) pole extraction, (iii) components separation. For the pole extraction, a novel global pole extraction approach is proposed to handle 3 different cases of street furniture. In the evaluation of results, which involves the decomposition of 27 different instances of street furniture, we demonstrate that our method decomposes mixed classes street furniture into poles and different components with respect to different functionalities.

CEFTA Agreement and Opportunities for Wood Furniture Export of the Republic of Macedonia

OpenAIRE

Ilijana Petrovska; Živka Meloska; Krum Efremov; Kiril Postolov

2016-01-01

This paper is focused on business possibilities of CEFTA 2006 and its influence on export trend of wood furniture from the Republic of Macedonia. First, six categories of wood furniture export are analyzed such as: office furniture, kitchen furniture, bedroom furniture, living and dining room furniture, shop furniture and other furniture, presenting a positive trend in each category, except for living and dining room furniture. The total export of wood furniture shows a positive trend. The se...

Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

Science.gov (United States)

Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

2017-09-01

This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

[Exposure to hazardous chemical substances in furniture industry].

Science.gov (United States)

Pośniak, Małgorzata; Kowalska, Joanna; Makhniashvili, Ivan

2005-01-01

The aim of the study was to assess the exposure to organic solvents in plants of the furniture industry. Studies were conducted in five furniture plants. Hazardous chemicals present in the air at workposts were determined by capillary gas chromatography with mass spectrometry and flame ionization detection. The analysis of air samples collected at the workposts allowed to identify the following chemicals occurring during varnishing and cleaning of furniture surface elements: acetone, butan-2-one, ethyl, isobutyl and methoxypropyl acetate, 4-methylpentan-2-on, toluene, ethylbenzene and xylenes. Indices characteristic of combined exposure ranged from 0.13 to 1.67 and exceeded the limit value at 21% of workposts. The results of the study indicate that chemicals present at representative workposts during the furniture production are harmful to health of workers, especially those involved in varnishing and cleaning of furniture elements.

Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

OpenAIRE

Lidia Martínez Murillo

2007-01-01

Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

78 FR 13626 - Wooden Bedroom Furniture From the People's Republic of China: Initiation of Administrative Review

Science.gov (United States)

2013-02-28

.... Shanghai Fangjia Industry Co., Ltd.... No. Shanghai Hospitality Product Mfg., No. Co., Ltd. Shanghai... Co., Ltd., Artwork Metal & Plastic Co., Ltd., Jibson Industries Ltd., Always Loyal International.... Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

Factors influencing selection of office furniture by corporations and universities

Science.gov (United States)

R. Bruce Anderson

1976-01-01

Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

Dinamika Budaya Material pada Desain Furnitur Kayu di Indonesia

Directory of Open Access Journals (Sweden)

Arianti Ayu Puspita Ayu Puspita

2016-09-01

ABSTRAK   Perubahan kondisi ekonomi hingga abad ke-21, dan meningkatnya kebutuhan furnitur baik dari luar maupun dalam negeri, kemudian perkembangan ilmu desain di Indone sia, secara tidak langsung berhubungan de ngan permasalahan ekologi. Ketersediaan sumber daya alam seperti kayu, semakin berkurang sehingga mendorong industri furnitur di Indonesia untuk menggunakan alternatif berbagai macam kayu solid, kayu olahan hingga kayu limbah. Dari waktu ke waktu, perubahan kondisi sosial, ekonomi, dan gaya hidup, turut berperan pada kemunculan bentuk-bentuk furnitur baru di Indonesia. Pada penelitian ini, transformasi   kebutuhan material kayu pada furnitur akan dikaitkan dengan dinamika sosial budaya yang terjadi dari abad ke-18 hingga abad ke-21 di Indonesia. Tansformasi  akan dilihat berdasarkan perubahan teori Material Cultural Studies, yang kemudian akan menghasilkan kesimpulan bahwa konsep ekologi berperan penting dalam perkembangan desain furnitur kayu di Indonesia.   Kata kunci: transformasi budaya, furnitur, kayu, Indonesia, ekologi

Evaluation of consumers' choice of wooden dining furniture in ...

African Journals Online (AJOL)

Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

Furniture Industry Assessment: Trade Policy and Market Opportunities

OpenAIRE

Lord, Montague J.

1999-01-01

The report analyzes the international competitiveness of furniture industry based on calculations of effective rates of protection and trade indicators. Furniture manufacturing remains one of the most highly protected industries in Egypt. Although the nominal rate of protection (NRP) for that industry was lowered from 50 percent in 1997 to 40 percent, its rate remains the fourth highest of all manufacturing categories. The effective rate of protection (ERP) for the wood furniture industry is ...

The Investigation of Soft Furniture Upholstery Deformational Behaviour

Directory of Open Access Journals (Sweden)

Donata ZUBAUSKIENE

2012-12-01

Full Text Available Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into account the differences of applied materials mechanical properties. Otherwise external view and quality of upholstery may be unacceptable due to obvious visual material excess on soft furniture surfaces, which is called pull-on ease. The aim of this investigation was to determine the dependencies between three different levels of soft furniture upholstery pre-tension and corresponding values of pull-on ease. New testing method presented in this study allows defining soft furniture upholstery deformational behaviour and its regularities in respect to the initial dimensions of upholstery patterns.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3099

POLE-LIKE STREET FURNITURE DECOMPOSTION IN MOBILE LASER SCANNING DATA

OpenAIRE

Li, F.; Oude Elberink, S.; Vosselman, G.

2016-01-01

Automatic semantic interpretation of street furniture has become a popular topic in recent years. Current studies detect street furniture as connected components of points above the street level. Street furniture classification based on properties of such components suffers from large intra class variability of shapes and cannot deal with mixed classes like traffic signs attached to light poles. In this paper, we focus on the decomposition of point clouds of pole-like street furniture. A nove...

OFFICE FURNITURE DESIGN SET: SINTEX (1965-1977

Directory of Open Access Journals (Sweden)

Aida Puente Toraño

2013-07-01

Full Text Available Litton Industries decided to establish one of its divisions in Northern Spain in 1965 called Litton-Cole. They chose Asturias to set up a factory intended to manufacture office furniture with a metallic component. The region had the potential to develop this kind of product due to its industrial base. It was easy to be provided with materials like steel, but above all a specialized workforce from Asturias’ Arms Industry. In the context of Spanish sixties José Antonio Menéndez Hevia was in charge of designing several banks and other public commercial establishments. Due to his connection with the Asturian banking sector, he had the opportunity to design office furniture set for Cole Steel. Cole Steel was the commercial name for the Asturian factory. Menéndez Hevia designed a very thorough set with almost twenty possible combinations that was commercialized under the name of Sintex. The series was successful on a national scale which was aimed at furnishing bank branch offices, but it was also exported to countries like Italy. Thousands of units were sold as part of one of the few Spanish design products manufactured in series at that time. The factory was closed in 1977, but in the general background of Spanish industrial design this series was forgotten, being part of our usual anonymous design history.

THE MARKETING SERVICES ON THE FURNITURE MARKET

Directory of Open Access Journals (Sweden)

Flaviu MEGHIŞAN

2007-01-01

Full Text Available The distribution of furniture has seen profound changes leading to accelerations of the dynamics of the competition environment, these changes being influenced, among other things, by the diversification of offer comprising new services. Today it seems essential to consider the distribution of furniture as an “industry that creates utility”. Indeed, the consumer is analyzed not only as a function of product characteristics, but as a set of utilities and advantages that distributions propose in their strategies of associated services. The services appear, in the same time, as variables which are applied by the distributor in his strategy to differentiate themselves and as utilities associated to the product, utilities which the consumer - as “problem-solver” - integrates in his decision making process. The consumer buys not just a simple product (furniture, but a global product which includes a sum of jointed attributes and utilities (proximity, product line, point of sale concept, information, warranty, etc.. This paper analyzes the services offer from the distribution of furniture as a method to solve the problems of furniture buyer. From this perspective the paper takes into consideration the various profiles of buying behavior, makes a critical analysis of the structure of services involved, defines a new structure of services based on the phases of buying behavior process.

Learning From the Furniture Scale

DEFF Research Database (Denmark)

Hvejsel, Marie Frier; Kirkegaard, Poul Henning

2018-01-01

Given its proximity to the human body, the furniture scale holds a particular potential in grasping the fundamental aesthetic potential of architecture to address its inhabitants by means of spatial ‘gestures’. Likewise, it holds a technical germ in realizing this potential given its immediate...... tangibility allowing experimentation with the ‘principles’ of architectural construction. In present paper we explore this dual tectonic potential of the furniture scale as an epistemological foundation in architectural education. In this matter, we discuss the conduct of a master-level course where we...

Identifying the customer satisfaction factors in furniture market

Directory of Open Access Journals (Sweden)

Majid Azizi

2017-05-01

Full Text Available Purpose – the purpose of this research is to identify the influential factors on customer satisfaction in the Iranian furniture market in order to get acquainted with the fundamental items for planning future sales programs with the purposes of extolling competitive advantages. Design/methodology/approach – A commixture of 6 items and 31 factors were educed from interviewing with 20 experts in furniture designing and manufacturing industry. The collected data from customer need indexes in previous research were also used. Findings – results showed that such factors as economic factors weighting 0.32, product specifications weighting 0.21 and credibility weighting 0.19 were the most important indexes and price weighting 0.195, fame weighting 0.131, quality, durability and resistance weighting 0.116, paying conditions weighting 0.095, designing and decorating in virtual softwares before ordering weighting 0.074, updatedness weighting 0.064 and interaction approach with the weight of 0.42 were the most considerable influential sub-indexes on the satisfaction of the Iranian furniture market customers. Research limitations/implications – by the enhancement of competition throughout the world markets and the inevitable presence of Iran in it, the market activists’ concentration should shift towards paying comprehensive attention to desires and needs of furniture market customers. Practical implications – some important issues on planning suitable manufacturing and marketing programs in furniture market are introduce so that the activists be aware of considering the growing knowledge and awareness of end-users which increases the pressure on the manufacturer side. There are also some solutions in terms of internal and external organizational factors with regard to the complex nature of competitive environment in furniture market. Originality/value – the paper provides an examination of effective factors on customer satisfaction with a

About furniture. Before and after Ptolomaeus Philadelphos' pavilion

Directory of Open Access Journals (Sweden)

Elena Calandra

2010-07-01

Full Text Available The furniture is of primary importance towards the canopies definition, more than the architectonic structure: they  contribute, in fact, in creating and organizing the spaces, so that there is almost no distinction between furniture and structure, as it is possible to observe in the ancient sources of different periods (Herodotus, Euripides, Julius Caesar, Plutarchus, Athenaeus: the pavilions of Xerxes at Plataia, of Ion at Delphi, of Alexander after the Issa battle and at Susa, of Pompey at Pharsalos, as well as the Ptolomaeus's canopy at Alexandria. At the same time, the furniture language is studied, signifying the power and the force of the sovereign through the luxurious materials and surprising the spectators.      At the end, some hypotheses on the final destination of the furniture, after dismantling the Ptolomaeus' canopy, equiped for one year.

Intelligent Furniture Design in the Elderly Based on the Cognitive Situation

Directory of Open Access Journals (Sweden)

Lu Xinhui

2017-01-01

Full Text Available This paper analyzes the present situation of Chinese elderly furniture and the elderly has cognitive characteristics that consciousness experiences and recognitions recede, cognitive fuzzy from Information processing. Expounds the elderly intelligent furniture design elements: functional elements required the elderly furniture is easy and simple to handle; Size and shape elements should be biased towards low, light type, reduce multifunction or fold function; colour collocation should use low lightness and low purity natural materials; Emotional elements design should meet the demand of the elderly social emotion. Introduction of intelligent furniture make up the cognitive decline in the elderly, Furniture judge the elderly demand by the inductor, Supplement by hardware control module to solve the special needs of the elderly life. Build design thinking based on the cognitive process and explore the elderly intelligent furniture design. This paper discusses the design process, for example and concludes the design rules: 1.The Operating Experience Pleasure. It is the height matching of user expectation and furniture function. Pleasure in the design of the operating parts mainly embodies in two aspects. Firstly, the Fitts Law; Secondly, it’s The Movement Optimization. 2.”Unconscious” Design. Intelligent furniture need to delete unnecessary operation module, make it easy to understand, furniture function and cognitive scene match with each other. 3. Modularity Design. Modularization can indirectly regulate the scale and specification of the design. Under the premise of individual character, customization, the compression of the cost, Designer should make the elderly intelligent furniture consistent with the user action.4.Design Consistency. The consistency principle reflected in the appearance, color and operation way consistency.

The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

OpenAIRE

Wang Lin; He Jinfeng; Xu Songjie

2017-01-01

In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber...

China’s wood furniture manufacturing industry: industrial cluster and export competitiveness

OpenAIRE

Yang, hongqiang; Ji, Chunyi; Nie, Ning; Hong, Yinxing

2012-01-01

China is the largest furniture exporter in the world. Its wood furniture industry has become an important part of the country’s forestry economic development. Hence, investigating China’s furniture industry cluster and export competitiveness is favorable for the sustainable development of China’s forestry industry. This study indicates that, under the guidance of the export-oriented strategy of China’s reform and opening up for 30 years, the country’s furniture industry has formed three big i...

Optimization of inventory management in furniture manufacturing

OpenAIRE

Karkauskas, Justinas

2017-01-01

Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

Anthropometric evaluation of the Creches children furniture in Turkey.

Science.gov (United States)

Barli, Onder; Sari, Reyhan Midilli; Elmali, Derya; Aydintan, Erkan

2006-12-01

The dimensions of the living and working space and buildings, the types of material and different riggings should be designed to conform to the users' anthropometric measures. The first requirement to design on ergonomic system is to measure the human being who will work and live in that system. Because of this, anthropometric measures are the most frequently used ergonomic data during the design process. In this research paper, we attempt to organize a new data base of anthropometric data to use in the design of children's equipment and furniture used in crèches. A starting point for research on the proper dimensions of creche furniture is to investigate how the dimensions of furniture reflect the body dimensions and the functional needs of the children using furniture. The anthropometric data of 3, 4 and 5 year-old-children in crèches was used. We report the results of the measurements of 18 anthropometric characteristics of children which constitute a set of basic data for the design of functional spaces and furniture.

Evaluation of consumers' choice of wooden dining furniture in ...

African Journals Online (AJOL)

USER

2010-05-24

May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

The Influence of Furniture on Air Velocity in a Room

DEFF Research Database (Denmark)

Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room. Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set......-up is simulated with one of the inlets where a volume resistance represents the furniture....

Street furniture concept in Pasar Buah and Bukit Gundaling Based on place identity

Science.gov (United States)

Ginting, Nurlisa; Vinky Rahman, N.; Delianur Nasution, Achmad; Nawawiy Loebis, M.; Sinaga, Fitri A.

2018-03-01

Tourism is one of the largest sources of the foreign exchange for a country, that encourage many developers to develop it. Karo District located in the province of North Sumatera, Indonesia, which has many tourist destinations with natural and cultural resources, including Pasar Buah and Bukit Gundaling. To develop Tourism, one of way is with increasing place identity in tourist destinations. Unfortunately, place identity in Pasar Buah and Bukit Gundaling are still lacking, so it needs improvement, one of that is the Street furniture in Pasar Buah and Bukit Gundaling. This study aims to design the concept of the Street furniture planning in Pasar Buah and Bukit Gundaling. The method used is a qualitative method, that is design street furniture using five groups elements of street furniture: decorative element, service furniture, trade furniture, signaling furniture, and advertisement furniture. The result of this study is the concept of the design street furniture of Pasar Buah and Bukit Gundaling, which can use to improve place identity in tourism of Karo District.

Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

Directory of Open Access Journals (Sweden)

Ika Rinawati Dyah

2018-01-01

Full Text Available Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

Science.gov (United States)

Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

2018-02-01

Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

Occupational injuries in the Finnish furniture industry.

Science.gov (United States)

Aaltonen, M V

1996-06-01

The purpose of the study was to determine the types of occupational injuries that occur in the Finnish furniture industry and to see whether they differ as regards production type and company size. During a one-year registration period accident events, the actual and potential severity of the injuries, the causes of the accidents, and the measures needed to prevent such accidents were examined in 18 Finnish furniture factories of different types. An analysis of covariance determined the variables affecting the actual and potential severity of the injuries. The 214 accidents registered were lost-time injuries; two of them resulted in slight partial loss of fingertips. The disabling injury rate was 14.4 per 100 workers per year. Wooden furniture production and kitchen cupboard production in large companies had the highest rate. Accidents involving machines comprised half of the material. Saws were the most common machine type. Forty-two percent of the injuries could have been more severe; one injury could have been fatal. The injured persons and their foremen identified the causal factors of the accidents and the needed safety countermeasures well. Sixty-six percent of the causes and 65% of the safety countermeasures were associated with the actions of the workers and the workplace procedures. Nevertheless, only 6% of the identified safety countermeasures were put into force. It was estimated that, in 1987, 2000 on-site accidents leading to at least first-aid at some health care center occurred in the Finnish furniture industry. Special efforts should be taken to improve safety in furniture production in Finland.

The Application of Industry 4.0 in Customized Furniture Manufacturing Industry

Directory of Open Access Journals (Sweden)

Wang Lin

2017-01-01

Full Text Available In the background of industrial 4.0, this paper analyzes the developmental road about customized furniture factory. Based on the concepts and features of industry 4.0, this paper analyzes the composition of the customized furniture factory, the main operation system and the operation process of the intelligent customized furniture factory. In order to achieve efficient and accurate production targets, intelligent customized furniture factory should be set up through the establishment of cyber physical system( CPS to cover the intelligent network.

Business plan for a Chinese furniture company

OpenAIRE

Wang, Haodi

2016-01-01

Abstract As a popular consumable, marketing costs of furniture are directly related to the benefits of manufacturing enterprise. Nowadays, most furniture manufacturing enterprises still adopt the traditional marketing strategy, which is single-directional, indirect and hierarchical strategy. It is not only difficult to meet the various and individual customers needs but also expensive for enterprises to exploit the market. Meanwhile, it prevents enterprises from following the market needs....

Household dust metal levels in The Sao Paulo metropolitan area

International Nuclear Information System (INIS)

Scapin, Valdirene O.; Scapin, Marcos A.; Sato, Ivone M.

2007-01-01

A study about household dust is being conducted to determine the level of metal contamination in the Sao Paulo Metropolitan Area (SPMA). The SPMA, with 18 million inhabitants, is one of the largest urban areas of the world, with serious environmental problems, due to the great amount of industries, heavy traffic and the disordered growth of population. The pollutants originate from a multiplicity of indoor and outdoor sources. Indoor sources are originated from residual (hair, skin scales), pets, human activities, construction materials, and furnishings as well as biological material (pollen, insect parts).and outdoor pollution, usually from the urban traffic. The pollutant mixture involved in numerous physical and chemical processes and changes its characteristics with time. Its composition and concentration depend on the strengths of indoor sources, the concentration of pollutants outside and the properties of ventilation and air-conditioning systems. It is well recognized that many metals have chronic effects on humans, in particular toddlers, who are at an higher risk compared to adults because they engage in greater hand to-mouth activity and their neurological systems are still developing. The household dust samples were collected from different localities, using vacuum cleaner, and sieved up to particle size -1 ; Mn, 119-369 μg g -1 ; Fe, 372-1464 μg g -1 ; Ni, 33-85 μg g -1 ; Cu, 42-303 μg g -1 ; Zn, 156-1369 μg g -1 and Pb, 26-160 μg g -1 . (author)

Furniture firms shuns CSL for EMS program expansion

Energy Technology Data Exchange (ETDEWEB)

Deans, B

1982-05-31

The R.B. Furniture Company's disappointment in its 10 CSL Industries Inc. energy-management systems is responsible for a decision to install Trimax Controls in the remaining 67 stores. At issue are CSL's service policy of using independent installers and service contractors as well as technical problems with the equipment, although R.B. Furniture concedes it had a 2.5-year payback, a 20% drop in electricity consumption, and generally reliable performance of the CSL system. A CSL official claims its higher equipment costs are the real reason. Interviews with CSL and R.B. Furniture Co. representatives explore the attitudes and problems of both firms. The Trimex system includes a three-year warranty. (DCK)

Furniture Industry in Kenya : Situational Analysis and Strategy

OpenAIRE

Creapo Oy; World Bank Group

2015-01-01

The Government of Kenya recognizes that the performance of the furniture sector is crucial both to employment and growth in the country. The Ministry of Industrialization and Enterprise Development (MOIED) therefore requested an analysis of both the furniture and timber sectors, in order to understand their current state of development, their main constraints, and the interventions necessa...

Analysis of Value Chain Governance: Scenarios to Develop Small-Scale Furniture Producers

Directory of Open Access Journals (Sweden)

Rika Harini Irawati

2011-05-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Furniture industry had shown a long chain of production to consumption, from raw material producers (tree growers, semi-finished producers, finished product producers, and retailers to exporters. Jepara as a centre furniture industry in Indonesia incorporates around 15,000 business units and provide livelihoods to approximately 170,000 workers. This sector contributes about 27% of Jepara‘s people domestic income. Small and medium furniture enterprises (SMEs have significant roles in the furniture industry as production structures are characterized by them. Power and information imbalance throughout the furniture value chain have resulted in problems of uneven distribution of gains among actors of the industry. SME furniture producers have experienced an unfair value added distribution. Hence, development of SMEs is important for strengthening the industry and expected to result in a portion of value added distribution to them.  We are trying to develop scenarios for SME improvement in the furniture industry in Jepara by identifying their problems and implementing Value Chain Analysis (VCA. VCA is an approach to describe SME producer relations with other actors in the industry and the governance type of their relations. Data is collected by interviewing selected SMEs from the association of small scale producers in Jepara to get detailed maps of their value chain. The research will produce future scenarios and intervention points to improve small-scale producer sustainability and better value added distribution among furniture actors. The scenarios will not only benefit selected producers but also the furniture industry of Jepara, and can be adopted for similar industries throughout Indonesia and abroad. Keywords: furniture, value chain, governance, scenario, small-scale

41 CFR 109-25.104 - Acquisition of office furniture and office machines.

Science.gov (United States)

2010-07-01

... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

Customer Relationship within the Furniture Design Market : A qualitative study of how companies within the furniture design market relate to the challenges connected to customer loyalty

OpenAIRE

Wahlström, Marie-Louise; Bergström, Jenny

2010-01-01

Background: The customer relationship is becoming more important for companies within the Swedish furniture design industry due to competition for market shares. The market is getting more crammed while the interest for furniture design amongst people is increasing, therefore furniture design companies need to find effective ways to attract loyal customers. Research has been made to show the importance of collaboration between companies and this is something that can increase the market share...

Proxemic Transitions: Designing Shape-Changing Furniture for Informal Meetings

DEFF Research Database (Denmark)

Grønbæk, Jens Emil; Korsgaard, Henrik; Petersen, Marianne Graves

2017-01-01

Shape-changing interfaces is an emerging field in HCI that explores the qualities of physically dynamic artifacts. At furniture-scale such dynamic artifacts have the potential of changing the ways we collaborate and engage with spaces. In- formed by theories of proxemics, empirical studies...... of informal meetings and design work with shape-changing furniture, we develop the notion of proxemic transitions. We present three design aspects of proxemic transitions: transition speed, step- wise reconfiguration, and situational flexibility. The design aspects focus on how to balance between physical...... between a table and a board surface. These contributions outline important aspects to consider when designing shape-changing furniture....

A comparative study of three different kinds of school furniture.

Science.gov (United States)

Aagaard, Jens; Storr-Paulsen, Annette

1995-05-01

Several studies indicate that the ISO standards for school furniture seem to be inappropriate, and there is increasing evidence that the inclination of the seat should be forward and that it should be possible to adjust the table-top to a certain non-horizontal angle. However, these studies have predominantly used objective measurement methods on adult subjects for short-term experiments in rather artificial surroundings. By means of structured interviews registering the school children's perception of ergonomic comfort, the present study has compared three types of school furniture-the original ISO-standard type, and two different new types characterized by forward slanting seats and tiltable desk-tops, the main difference between the two being approximately 15 cm in the height of the chair as well as the table. The study showed that the highest of the two tilting types was perceived to be significantly better than the two others in terms of table height, chair height, reading position, back-rest, and global assessment. Likewise, the feature of a tiltable table-top was considered overwhelmingly positive independently of the height of the furniture. It is recommended that school authorities, producers of school furniture, and relevant medical personnel consider these results for alternative designs of school furniture. It should be kept in mind, however, that school furniture is only one among many factors in the multifactorial field of the back health of school children.

Competing Explanations in the Evolution of the Danish Furniture Industry

DEFF Research Database (Denmark)

Howells, John

This article assesses the credibility and relative economic importance of the many real and proposed unique development events in the Post-War evolution of the Danish furniture industry by means of available trade and production time series. It finds first, that the Danish industry experienced its...... only exceptional growth event compared to other developed country furniture industries in the 1950s. It is argued that this establishes as the leading causal candidates for the Danish economic specialisation in furniture; subsidised export marketing of Danish Modern style in the US and the War......-undamaged Danish industry’s opportunistic exploitation of recovering European Post-War furniture markets. Second, the apparent prominence of particle board manufacture in today’s industry is a Danish specialisation with its origin in the 1950s growth event. Third, while there is much evidence that IKEA became...

Fungi in carpeting and furniture dust.

Science.gov (United States)

Schober, G

1991-11-01

The qualitative and quantitative species composition of fungi in carpets and upholstered furniture dust found in the living-rooms of nine Dutch dwellings was examined in a pilot study. Numbers of spores of xerophilic fungi did not differ in dust removed from carpeting and upholstery. Spores of hydrophilic species were found to be more predominant on floors (P less than 0.05), whereas meso-hygrophilic spores, largely dominated by allergologically relevant Penicillium species, were significantly more abundant in dust taken from regularly used furniture (P less than 0.05). Our results indicate that growth conditions for fungi in the micro-habitats of furniture differ from those in carpeting. No statistically significant differences in number of viable spores have been found in samples taken from ground-floor level compared with those taken from 1st to 3rd floor level of dwellings. From this study, the need for a micro-topographic analysis of the fungal flora in the human environment has become apparent. Efficient allergological home sanitation in dwellings of allergic patients requires detailed data about the colonization of the various micro-habitats by allergenic fungi.

Consumer perceptions of children’s furniture in Shanghai and Shenzhen, China

OpenAIRE

Chen, Jiao

2013-01-01

China’s high-speed economic growth has accelerated consumers’ disposable income evidently. With the improvement of living standards, people have increasingly been concerned about their life quality, especially when buying consumables like food, toys and clothing as well as durable commodities like furniture for their children. In the past ten years, the Chinese children's furniture market has developed rapidly, making up 9% of total furniture market. However, no studies concerning the analysi...

The Investigation of Soft Furniture Upholstery Deformational Behaviour

OpenAIRE

Donata ZUBAUSKIENE; Eugenija STRAZDIENE; Virginijus URBELIS; Virginija SACEVICIENE

2012-01-01

Textile materials, which are different in fibre content, weave type, density and thickness, as well as multi-layered synthetic leathers, are used in soft furniture upholstery production. Deformation - relaxation behaviour, which depends on mechanical properties of such materials differs significantly, also. From this standpoint substantial problem exists in soft furniture production, because the dimensions of its upholstery patterns, i.e. initial pretention must be adjusted taking into accoun...

Multilevel model of safety climate for furniture industries.

Science.gov (United States)

Rodrigues, Matilde A; Arezes, Pedro M; Leão, Celina P

2015-01-01

Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies' safety conditions were also analyzed. Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies' safety conditions; the organizational scale is the one that best reflects the actual safety conditions. The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups' safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Anthropometric measurements for ergonomic design of students’ furniture in India

Directory of Open Access Journals (Sweden)

Ismail Wilson Taifa

2017-02-01

Full Text Available This paper presents anthropometric measurements regarding engineering students in India. Health survey (ergonomic assessment was carried out to know the health status of all students who have been using poorly designed furniture. The data were measured with the help of various tools. After data collection and analysis, authors came up with exhaustive dimensions for designing adjustable classrooms furniture. Dimensions recommended include; bench surface height, bench depth and width, back rest width and height, backrest angle, desk height, desk depth, width, and desk angle. Therefore, an implementation of these data will help to create comfortability, safety, well-being, suitability, reduce Musculoskeletal disorders, and improve performance of students in terms of attentiveness. Also, it is highly recommended to consider requirements from students in designing classrooms furniture and conduct seminar or workshop to educate students regarding the negative impact towards adapting poor posture in the long usage of classrooms furniture.

Contributions to the deployment of furniture in pole central region Tocantins

Directory of Open Access Journals (Sweden)

Jorge D’ Ambros

2012-09-01

Full Text Available This study was developed in the central region of Tocantins, for the identification and analysis of positive factors, weaknesses, opportunities and threats associated with the furniture supply chain in order to continue the formation of the regional furniture pole. To achieve this objective the methodology used was to listen to local actors and experts in the furniture segment. Seventy-five local actors among industry officials, academic institutions and university representatives were interviewed. They pointed out and analyzed the main points related to the economic, social, political and environmental contributions stemming from the creation of a pole in the region. The tool used was the SWOT Analysis associated with the Method of Judges, and then the variables were subjected to Principal Component Analysis - PCA. The SWOT Matrix proved to be adequate and effective to be used as diagnostic tool along with local actors. The examination of all the factors associated with local furniture production chain helped to understand the activity and indicate actions that affect this arrangement and that will bring economic, social and environmental benefits. According to the experts, the establishment of a furniture industry in the region will favor the employment and income creation, local and regional sustainable development, improvements in business management, raise the standard of quality and productivity of the local furniture industry and improve the quality of population standard of living.

Analisis Strategi Pemasaran Usaha Jasa Bersama Furniture Jalan Setia Budi Medan

OpenAIRE

Silitonga, Natasya Meylani

2014-01-01

A thesis is called “Analysis of the strategy marketing Usaha Jasa Bersama Furniture.” Thebackground of this research is the development of business furniture currently, fueled by rising consumption needs as well as the from the community. And this is heightened by the increasing number of housing are constructed, so that is an opportunity that is very large in proportion to the business of furniture.With the increasing number of competitors, then many consumers, to be able to draw an underta...

Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

Directory of Open Access Journals (Sweden)

Aries Wicaksono

2014-11-01

Full Text Available Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS. PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it is important for information systems running properly.This research aimed to audit the general control and applications control on the expenditure cycle accounting information system at PT. Lagio Furniture. This type of audit is audit around the computer. And then also collecting data through observation and interviews with relevant parties. Results of thereserarch is the expenditure cycle accounting information system at PT. Lagio Furniture was good. But there is still need to be improved in the control plan security, operational management control, and control inputs.

Intensity of rivalry in Czech furniture production industry

OpenAIRE

Lucie Špačková; Pavel Žufan

2012-01-01

The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local) demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of ...

Influence of way of finishing furniture segments on amount emissions VOCs

Directory of Open Access Journals (Sweden)

Petr Čech

2010-01-01

Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

The Business of: School Furniture: Innovative Designs for Tomorrow's Learning

Science.gov (United States)

Lacey, Kylie

2013-01-01

As instruction shifts to a learner-centric, individualized approach with a focus on small group activities, heavy furniture that small hands cannot move on their own have become less desirable. The most popular pieces are lightweight, portable, and colorful. The Smith System furniture company encourages schools to select chairs and desks in their…

Intensity of rivalry in Czech furniture production industry

Directory of Open Access Journals (Sweden)

Lucie Špačková

2012-01-01

Full Text Available The paper focuses on furniture production industry in the Czech Republic and evaluates the influence of competition forces within this industry. These forces have a direct impact on success of competitive strategies of the firms. Furniture production industry is a typical branch occupied by numerous small and medium-sized firms. Small firms aim on satisfying domestic (or rather local demand, medium-sized and big firms are much more aiming on exports. The methodical sources for evaluation of rivalry represent particular influences defined by Porter in his model of five competitive forces. Main influences identified by Porter, which are increasing the intensity of competition in the furniture production industry in the Czech Republic include low industry concentration, relatively low diversity of competitors, decline in sales, low (or none switching costs, and existing excessive capacity within the industry. Further development will be most significantly influenced by a growing concentration of the bigger Czech producers on domestic market and overall economic development.

The Influence of Furniture on Air Velocity in a Room:an isothermal case

OpenAIRE

Nielsen, J. R.; Nielsen, Peter V.; Svidt, Kjeld

1998-01-01

Using isothermal full-scale experiments and 3-dimensional CFD simulations it is investigated how normal office furniture influences the air movements in a mixing ventilated room.Two different types of inlets are used in the experiments and a set-up with normal office furniture is made. The set-up is simulated with one of the inlets where a volume resistance represents the furniture.

Upgrading Wood-Based Industries: Harnessing the Social Network of Small-Scale Furniture Producers and Their Institutions

Directory of Open Access Journals (Sweden)

Melati ,

2011-05-01

Full Text Available Furniture is a major export commodity in Indonesia with a total value of USD 1.96 million in 2007.  Jepara District is one of the key location for wood furniture production with 15,271 furniture related business units employing 176,469 workers.  However, inefficiencies and power imbalances throughout the furniture value chain have resulted in overharvesting and uneven distribution of gains among the industry’s actors.  In contrast to price-setting international furniture retailers, small-scale producers enjoy the least value from their products.  In order to increase added value and competitiveness, small-scale furniture producers have made efforts to upgrade by harnessing their social network and institutions.  This paper describes small-scale furniture producers’ efforts to upgrade by utilising their social network and institutions in Jepara.  Data was collected through in-depth interviews with members of the small-scale furniture producers’ association.  The research provides insight into the nature of social networks and information flow and develops future scenarios to upgrade.  The scenarios will not only benefit the furniture industry in Jepara, but may also be adopted for similar industries throughout Indonesia and the world, and potentially improve many people’s economies and livelihoods.Keywords: wood-based industry, furniture, small-scale, social network, institution

STRATEGI PENINGKATAN DAYA SAING INDUSTRI FURNITURE ROTAN INDONESIA DI KAWASAN ASEAN DAN TIONGKOK

Directory of Open Access Journals (Sweden)

Rudi Eko Setyawan

2016-11-01

Full Text Available Competitiveness of a country’s export commodities is one of the indicators used to measure its economic progress. This study aims to analyze the competitiveness of Indonesian rattan furniture in China and the ASEAN region, along with the influencing factors and to conclude appropriate strategies to improve its competitiveness. The analysis was conducted by utilizing Diamond's Porter, Normalized Revealed Comparative Advantage (NRCA, and panel data regression. The results showed that the competitiveness of Indonesian rattan furniture in the ASEAN region and China, in the period of 2001 to 2014, is fluctuated with small level of competitiveness. This notion can be seen from all of the positive NRCA index values. In the Fixed Effects Model (FEM, the independent variables that significantly influence NRCA include the export prices and volumes, global prices of rattan furniture and raw rattan, the number of rattan industries, production of real rattan, production value of rattan, investment of rattan industry, direct labor of rattan industry, interest rate of Bank loans, implementation of ACFTA and violation policy of raw and semi-finished rattan exports. To increase the competitiveness of Indonesian rattan furniture, the government is urged to establish a development or training center for the innovative designs and improvement of quality standard of Indonesian rattan furniture. This is also supported by a guarantee of rattan raw material availability and technological improvement of rattan processing industry. Thus, the third step to perform is the improvement of infrastructure and distribution chain, improvement of market information systems, and strengthening of brand image of rattan furniture in Indonesia.Keywords:  competitiveness of rattan furniture, diamond's porter, normalized revealed comparative advantage, fixed effect model ABSTRAKDaya saing komoditas ekspor negara merupakan salah satu indikator yang digunakan untuk mengukur kemajuan

Revision of EU Ecolabel and EU Green Public Procurement criteria for furniture products: Preliminary Report

OpenAIRE

DONATELLO SHANE; MOONS HANS; CORDELLA MAURO; KOWALSKA MALGORZATA AGATA; KAPS RENATA BARBARA; WOLF Oliver; HIDALGO Carme; FUENTES Natalia

2014-01-01

The EU is responsible for around 20% of global furniture production and the many "ecolabel schemes" of potential relevance to furniture products have been briefly reviewed. Screening of 109 publications relating to the life cycle impacts of furniture products revealed several general trends, namely that material production and processing where the dominant sources of environmental impacts associated with furniture products. A comprehensive review of the use of hazardous substances and mixture...

The green marketing of modern office furniture

Institute of Scientific and Technical Information of China (English)

林凡青

2015-01-01

Green marketing is referred to as the mainstream of marketing in the 21st century, it mainly discusses the enterprise how to deal with the growing consumer demand for environmentally friendly products. Green marketing is an extension of the traditional marketing and the development, in the traditional marketing concept, through the coordination of enterprises, customers, competitors to gain maximum profits, and green marketing is more than the ecological environment factors included. Furniture enterprises through to carry out green marketing strategy, sales of green furniture products, the corresponding measures to guide the sustainable consumption and satisfy the consumer, to achieve economic interests, the interests of the consumers, the environment is unified.

Design of indoor furniture with acoustic insulation and noise reduction function

Science.gov (United States)

Chen, Ziqiang; Lyu, Jianhua; Chen, Ming

2018-05-01

In this article, the current status of noise pollution research is analyzed and indoor noise pollution hazard on human body is discussed taking noise pollution as entry point to better understand people's needs in this concern, and it comes to the conclusion that indoor furniture with noise insulation function is required; In addition, the design status and necessity of indoor furniture with noise insulation function are expounded and the material property, structure design essentials and form design are analyzed according to sound transmission principles. In the end, design case study is presented to provide an effective way for design of indoor furniture with acoustic insulation function that meets people's needs.

Classroom Furniture: The Mod Squad

Science.gov (United States)

Raths, David

2012-01-01

This is the first article in a six-part series on the elements of a collaborative classroom: furniture, social media, video/web conferencing tools, collaborative software, interactive devices, and mobile devices. With most universities facing tight budgets, convincing administrators to invest in expensive new classrooms is a challenge. Many higher…

RFID- TEKNIIKAN MAHDOLLISTAMAT TYÖAIKASÄÄSTÖT HUONEKALUTEOLLISUUDESSA : - CASE INCAP FURNITURE OY

OpenAIRE

Taskinen, Jarkko

2009-01-01

Opinnäytetyön tarkoituksena oli selvittää RFID- tekniikan eli radiotaajuudella toimivan etätunnistamisen mahdollistamia työaikasäästöjä huonekaluteollisuudessa. Toimeksiantaja oli Incap Furniture Oy. Incap Furniture Oy on yksi suurimmista mäntyhuonekalusopimusvalmistajista maailmassa. Pääasiakas on Ikea. Incap Furniture Oy on aloittanut projektin, jonka tarkoitus on tutkia RFID- tekniikan mahdollisuuksia ja hyötyjä tehtaiden toiminnassa. Opinnäytetyö oli osa projektia. Opinnäyt...

DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

Directory of Open Access Journals (Sweden)

Basworo Ardi Pramono

2012-07-01

Full Text Available Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dikembangkan dengan mengimplementasikan beberapa komponen  teknologi utama yaitu Augmented Reality (AR, engine 3D ke dalam aplikasi.  Keseluruhan komponen tersebut dirancang agar dapat  menghadirkan suasana belanja yang menarik di hadapan user secara digital. Dengan demikian user dapat mencoba apakah furniture yang di beli cocok dengan ruangan. Dengan menggunakan FSM, user dapat mencoba model 3D furniture, memilih model furniture hingga mengambil foto ruangannya dengan hasil visualisasi model furniture 3D yang disukai untuk selanjutnya dapat disimpan.

Investigation of Miter Corner Joint Strength of Case Furniture from Particleboard

Directory of Open Access Journals (Sweden)

Valdas NORVYDAS

2012-12-01

Full Text Available Most pieces of case furniture (kitchen and bathroom furniture, cabinets, wardrobes, tables and etc. are made of 18 mm thick wood particle boards finished with various coatings. This three-layered constructional material is obtained by bonding wood particles of different fractions with synthetic resins using heating. The exploitation duration and quality of case furniture is determined by the mechanical properties of wood particle boards and the construction of joints of wood-based panels. On a frequent basis, pieces of case furniture with non-dismantable and dismantable construction are joined by using multidowel glued joints and cam connecting fittings intended for furniture, respectively. Wood-based panels can be joined with mitre joints whose mechanical properties have not undergone testing and comparison with regular joints when applying insertable wooden dowels or furniture connecting fittings. During the testing of particle board properties it was established that joining wood-based panels in this way ensures most efficient use of mechanical characteristics of the particleboard. In addition to the properties of the mitre joint, the tests also allowed determining the bending strength, tensile strength and bonding strength of the constructional material, and providing an original method for testing board properties, which can be successfully applied to the prediction of properties of the mitre joint. Tests were performed by using a universal tensile testing machine P-0.5. Joints were bonded by applying PVA dispersion. The surface of boards was veneered by using mahogany veneer and urea formaldehyde resin. It was found that mitre joints of wood particle boards can withstand loads that are higher from 2 to 4 times, in comparison to glued doweled joints or joints constructed with cam connecting fittings.DOI: http://dx.doi.org/10.5755/j01.ms.18.4.3095

Factors related to furniture anchoring: a method for reducing harm during earthquakes.

Science.gov (United States)

Haraoka, Tomoko; Hayasaka, Shinya; Murata, Chiyoe; Yamaoka, Taiji; Ojima, Toshiyuki

2013-02-01

Fatalities and injuries during an earthquake can be reduced by taking preemptive measures before-hand, and furniture anchoring is an important safety measure for all residents. This study sought to clarify the factors associated with furniture anchoring within the home. A self-administered mail survey was completed from July to August 2010 by 3500 men and women between the ages of 20 and 69 years who were chosen at random from an official government resident registry of 2 cities in Japan. Of the 1729 valid responses, 37.1% reported furniture anchoring. An association with furniture anchoring was observed for having viewed earthquake intensity maps or damage predictions (odds ratio [OR] 1.92, 95% C1 1.54-2.39), expressing concern about a future earthquake (OR 2.07, 95% C1 1.36-3.15), feelings of urgency (OR 1.90, 95% CI 1.47-2.45), accuracy of the government disaster preparedness information (OR 1.68, 95% CI 1.17-2.42), knowledge of the meaning of emergency earthquake warnings (OR 1.67, 95% CI 1.12-2.48), and participation in voluntary disaster preparedness activities (OR 1.40, 95% C1 1.12-1.75). Furniture anchoring was found to be associated with risk awareness, risk perception, disaster preparedness information provided by government to residents, knowledge of earthquakes, participation in voluntary disaster preparedness activities, nonwooden structures, and marital status. An increase in furniture anchoring is important and can be achieved through education and training in daily life.

Audit Sistem Informasi Akuntansi Siklus Pengeluaran pada PT. Lagio Furniture

OpenAIRE

Wicaksono, Aries

2014-01-01

Rapid technological developments make the whole thing easier. Many companies also take advantage of these technological developments. Similarly, the corporate accounting system that uses the benefits of information technology in the form of Accounting Information Systems (AIS). PT. Lagio Furniture is amanufacturing company that produces furniture for the premium class. Information system is an important part that helps the company's operations become more effective and efficient, therefore it...

Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

Directory of Open Access Journals (Sweden)

Seyed Mohammad Mousavi

2018-06-01

Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

Value Criteria for School Furniture

Science.gov (United States)

Spellman, Walter

2012-01-01

Making furniture decisions can involve many factors, and they vary from institution to institution. For fixtures, furnishings and equipment, comparing initial cost with the cost of ownership over a life cycle can be more challenging. It may be the functionality of the furnishings that provides the greatest return on investment. In this article,…

Determination of effective criteria on development of RTA Furniture Industry in Iran

Directory of Open Access Journals (Sweden)

hosein omidi

2016-06-01

Full Text Available Ready to assemble furniture industry in Iran has not been considered by practitioners and investors as it is known in the other countries. While, it is possible to achive the many competitive advantage, if this industry develop in Iran. With regard to this issue, the goal of this study is to introduce the potential market for ready to assemble furniture and determination and prioritize of the effective criteria on development of Iran ready to assemble furniture industry. For this purpose, after preliminary investigation and interview with some of the furniture producers and relevant experts, the identified criteria were divided into five major groups as Economic, Management, Marketing & Sales, Technical-Technological and Infrastructure and as well as 42 sub-criteria. The hierarchy of these criteria was designed and then the weighting values of criteria and sub-criteria were determined using Analytical Hierarchy Process (AHP by expert choice software. The results indicated that the management and marketing & sales criteria have the highest weighting values at the first level. In addition, among the effective sub-criteria, the criteria as marketing innovation, design innovation, operations management, logistics management, raw materials innovation and product promotion, have the highest priorities for development of ready to assemble furniture industry in Iran.

Identifying future competitive business strategies for the U.S. furniture industry: Benchmarking and paradigm shifts

Science.gov (United States)

Albert Schuler; Urs Buehlmann

2003-01-01

This paper describes benchmarking activities undertaken to provide a basis for comparing the U.S. wood furniture industry with other nations that have a globally competitive furniture manufacturing industry. The second part of this paper outlines and discusses strategies that have the potential to help the U.S. furniture industry survive and thrive in a global business...

The Influence of Office Furniture on the Air Movement in a Mixing Ventilated Room

DEFF Research Database (Denmark)

Nielsen, June Richther

Isothermal and thermal experiments and simulations form the basis of the investigations in this thesis. It is mainly the isothermal case that is studied. The examinations concern how normal office furniture influences the air movements in a mixing ventilated room. Especially, the jet under...... whereas the two last-mentioned inlets are simulated 3-dimensional. In the isothermal simulations a furniture volume is used to represent the physical furniture and in the thermal case a furniture volume together with a volume source is used. The investigations of the isothermal experiments and simulations...... by the thermal forces in the room. The thermal case needs more investigation because only two experiments and the corresponding simulations are the base of the investigations....

Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

OpenAIRE

Ika Rinawati Dyah; Sriyanto; Puspita Sari Diana; Cantya Prayodha Andana

2018-01-01

Furniture is one of Indonesia’s main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical mater...

Retouching without Touching : Creating the illusion of recoloured furniture through light projection

NARCIS (Netherlands)

van Adrichem, F.; van Bommel, M.; Vasques Dias, M.

2017-01-01

In this article an alternative method for recolouring discoloured furniture is presented. The focus is on two discoloured pieces of furniture: an Amsterdam School buffet and a Rococo marquetry commode that both have lost their bright colours due to fading (figures 1, 2). The buffet was dyed with a

41 CFR 101-25.104 - Acquisition of office furniture and office machines.

Science.gov (United States)

2010-07-01

... furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines... machines. The acquisition of new items shall be limited to those requirements which are considered...

Ergonomic suitability of educational furniture and possible health implications in a university setting

Science.gov (United States)

Odunaiya, Nse A; Owonuwa, Dolapo D; Oguntibeju, Oluwafemi O

2014-01-01

Ergonomically unsuitable school furniture is frequently considered one of the major causes of severe posture problems in adulthood. This study was designed to determine the ergonomic suitability of educational furniture in the lecture theaters at the University of Ibadan to serve as a case study. Sample of convenience was used to select participants for this study. The lecture theaters were selected based on their capacity, design, and dimension. A total of 240 students (120 males and 120 females) participated in this study. The ergonomic suitability of lecture theaters was determined by analyzing the mismatches between student anthropometric dimensions and furniture dimensions, and also by analyzing the design and orientation of the lecture theaters. The data were analyzed using descriptive statistics of mean, standard deviation, range, and median. The results showed that there was a significant difference in height between males and females but no significant difference between other anthropometric variables measured. About 20% of the participants had a fitting seat height, while seat height was unsuitable for the remaining 80.4%. On the other hand, 23.3% had a fitting seat depth, while it was unsuitable for 76.7% of the participants, and 99.6% of the participants had fitting desk clearance but 0.4% found it unsuitable. A total of 25.8% of the participants had a fitting desk height, while 74.2% of the students found it unsuitable. It was concluded that the furniture in the lecture theaters at the university studied was not ergonomically suitable for the students. Hence it is recommended that further studies, including more universities across a wide spectrum of society, should be performed to determine the effect of furniture on student health, and the need to adopt the use of adjustable furniture in lecture theaters to prevent health hazards that may occur secondary to the use of unsuitable furniture. PMID:24511247

A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

OpenAIRE

Siti Suhaily,; Mohammad Jawaid,; H. P. S. Abdul Khalil,; A. Rahman Mohamed; , F. Ibrahim

2012-01-01

This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and te...

Characteristic and Preferences of Green Consumer Stratification As Bases to Formulating Marketing Strategies of Ecolabel-Certified Furniture

OpenAIRE

Ririn Wulandari; Budi Suharjo; Agus W. Soehadi; Herry Purnomo

2012-01-01

International furniture markets certify ecolabel has been growing, but the domestic market has not yet developed. Unfortunate, because these products have two advantages that ensure environmental sustainability and promote a furniture market. This study was expected to open and developed the domestic market for ecolabel-certified furniture. The aim of this study was to develop marketing strategies for ecolabel-certified furniture on each of green consumer stratifications. Consumer stratificat...

Utilization of Anthropometry in the Sphere of Sitting and Bed Furniture

Directory of Open Access Journals (Sweden)

Kateřina Dvouletá

2014-01-01

Full Text Available Dimensions of furniture shall respond to current anthropometrical dimensions and ergonomic requirements which are recommended typological group of products. With relevance to the changes of population’s height and enlargement of body proportions (according to the last measuring from 1985, it is necessary to revise the majority of dimensions of human – furniture and standards (based on updated measuring of 375 men and women. The proper furniture designing will be dependent on that.The aim is a statistical evaluation of data from the anthropometrical measuring, acquired within the NIS grant and creating optimal dimensions of sitting and lying furniture so that they respond to the needs of current population. Graphical simulations created in ergonomic software Tecnomatix Jack are intended to illustrate the dimension requirements. The result are processed in a form of charts which are classified XS–XL. The outputs are compared to data in professional literature and standards. According to preliminary results, the optimal dimensions were designed and those will be further specified and verified. For future, it will be necessary to state the dimensions approximatively to expected population growth.

Establishing an online store in the furniture retail business : Case study of Lähdesmäki Oy

OpenAIRE

Kareno, Justus

2013-01-01

This thesis describes the process of establishing an online store for a Finnish furniture retailer. The development of electronic commerce as a means of business is introduced as the force driving furniture retailers to establish an online presence. The theory of electronic commerce is presented and analyzed in terms of differences compared to sales via a conventional store. The development of electronic furniture retailing is analyzed by researching furniture retailers in Finland and th...

78 FR 17140 - Upholstered Furniture Fire Safety Technology; Meeting and Request for Comments

Science.gov (United States)

2013-03-20

... retardant (FR) chemicals, specialty fibers/fabrics without FR chemicals, inherently fire resistant materials... Furniture Fire Safety Technology; Meeting and Request for Comments AGENCY: Consumer Product Safety... Commission (CPSC, Commission, or we) is announcing its intent to hold a meeting on upholstered furniture fire...

A research on the effect of global trends in Turkish kitchen furniture sector

Directory of Open Access Journals (Sweden)

Ersin Uçar

2017-11-01

Full Text Available Through survey results, this study evaluated global trends’ effects on Turkish kitchen furniture production. The level of knowledge and difficulties of catching up with and implementing developmental trends in the Turkish kitchen furniture sector has been seen as having a structure equivalent to world standards because the level of material and technological development has been determined by four criteria: consumer demand, housing plans, technology inadequacy, and material inadequacy. According to the results, findings in this framework, consumer demand was most influential (45.4% in capturing and implementing enterprises’ trends. Evaluation results on kitchen furniture projects implemented by Turkish enterprises within the last 5 years showed that they mostly worked with models with one-lid views in cabinet-door applications (41.6%. As a result, world trends reflect the direct influence of Turkish kitchen furniture manufacturers on cabinet-door models and color preferences for kitchen units.

78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

Science.gov (United States)

2013-06-12

....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

Supply chain improvements through clustering: Relationships and competitive collaboration in the Norwegian furniture industry

OpenAIRE

Lindholm, Jorunn; Rødstøl, Anna With

2015-01-01

Master's thesis in Firm management There is an on-going debate regarding what Norway will do when the country can no longer rely as heavily on the oil as a source of wealth and prosperity. As there is a tradition for designing and making furniture in Norway, and the furniture industry is not dependent on favourable natural conditions, this industry could represent an alternative. As the Norwegian furniture manufacturing companies are producing in one world’s most high waged countries, ...

Integrating Energy and Environmental Management in Wood Furniture Industry

Science.gov (United States)

Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

Integrating energy and environmental management in wood furniture industry.

Science.gov (United States)

Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

75 FR 339 - Wooden Bedroom Furniture From the People's Republic of China: Rescission of Antidumping Duty New...

Science.gov (United States)

2010-01-05

... Republic of China: Rise Furniture Clarification Regarding Withdrawal of Review'' (November 24, 2009... Bedroom Furniture from the People's Republic of China: 2009 New Shipper Review of Rise Furniture Co., Ltd... From the People's Republic of China: Rescission of Antidumping Duty New Shipper Review AGENCY: Import...

Household hazardous waste

DEFF Research Database (Denmark)

Fjelsted, Lotte; Christensen, Thomas Højlund

2007-01-01

.) comprised 15-25% and foreign items comprised 10-20%. Water-based paint was the dominant part of the paint waste. The chemical composition of the paint waste and the paint-like waste was characterized by an analysis of 27 substances in seven waste fractions. The content of critical substances was tow......'Paint waste', a part of the 'household hazardous waste', amounting to approximately 5 tonnes was collected from recycling stations in two Danish cities. Sorting and analyses of the waste showed paint waste comprised approximately 65% of the mass, paint-like waste (cleaners, fillers, etc...... and the paint waste was less contaminated with heavy metals than was the ordinary household waste. This may suggest that households no longer need to source-segregate their paint if the household waste is incinerated, since the presence of a small quantity of solvent-based paint will not be harmful when...

The Level of Utilization of Secondary Timber Species among Furniture Producers

OpenAIRE

Antwi-Boasiako, Charles; Boadu, Kwadwo Boakye

2016-01-01

Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS) that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and ...

The Amish furniture cluster in Ohio: competitive factors and wood use estimates

Science.gov (United States)

Matthew Bumgardner; Robert Romig; William Luppold

2008-01-01

This paper is an assessment of wood use by the Amish furniture cluster located in northeastern Ohio. The paper also highlights the competitive and demographic factors that have enabled cluster growth and new business formation in a time of declining market share for the overall U.S. furniture industry. Several secondary information sources and discussions with local...

Measurement and human exposure assessment of brominated flame retardants in household products from South China.

Science.gov (United States)

Chen, She-Jun; Ma, Yun-Juan; Wang, Jing; Tian, Mi; Luo, Xiao-Jun; Chen, Da; Mai, Bi-Xian

2010-04-15

Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required. 2009 Elsevier B.V. All rights reserved.

FEA analysis and design optimization for a multifunctional piece of furniture

Directory of Open Access Journals (Sweden)

Haraga Georgeta

2017-01-01

Full Text Available The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with a solid modelling for the creation of the desired piece of multifunctional furniture is used in this case, the automatic generation of the finite element meshes. Getting more accurate results for the mesh refinement process can be made by changing parameters. The article outlines the developed model for analysing the supporting structure of the armchair. This model provides simulating of the different loads and checking the raised stresses and deformation in the structures analysed. The main objective of this research is to evaluate strength of wooden cedar armchair for a person weighing 140 kg and for this the finite element analysis (FEA has been used. Multifunctional furniture is the answer to the challenges contemporary lifestyle, creativity in design activities that require optimal space utilization and reducing costs.

Bamboo as sustainable material for furniture design in disaster and remote areas in Indonesia

Science.gov (United States)

Sofiana, Yunida; Wahidiyat, Mita; Caroline, Octaviana Sylvia

2018-03-01

Bamboo has been known as a sustainable material for architecture, but only used on a small scale for furniture. However, even though it a sustainable resource, many people considered Bamboo as outcast material for furniture because of its appearance. Evidently, the use of bamboo is often used to make simple tools with similar traditional designs for everyday life. The tradition of using bamboo was not further explored with respect to the ongoing development of creative design and function in the era of today’s modern technology. In retrospect to the above issues, this study is aimed to introduce the used of bamboo for material furniture in disaster and remote areas in Indonesia to increases their quality of life. It uses a research by a method of collecting data through surveys, literature review, interviews and training to determine the types of bamboo used for material furniture in disaster and remote territories. The results of this study is intended to show that the use of bamboo can be further developed into furniture for disaster and remote territory to create higher values of the products and increase the quality of life.

Flexibility in Modular Furniture Systems in Open Offices, Famagusta, North Cyprus

OpenAIRE

E. Farjami; La. Mohammadzadeh Afshar; Li. Mohammadzade Afshar; A. Taran

2014-01-01

Nowadays, flexibility introduced as a modern technology in furniture systems especially in interior planning design. According to results, the most important impact of these systems can be seen on open plan design that makes workspaces comfortable and increases the productivity of employees besides making good relationship between them. Briefly, there are some factors along with new systems in furniture design help create inappropriate space to make working better and easier while it has modu...

FEA analysis and design optimization for a multifunctional piece of furniture

OpenAIRE

Haraga Georgeta; Goanță Adrian Mihai

2017-01-01

The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA) application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with...

The global wood furniture value chain: what prospects for upgrading by developing countries? The case of South Africa

OpenAIRE

Kaplinsky, Raphael; Memedovic, Olga; Morris, Mike; Readman, Jeff

2003-01-01

Because of its resource and labour intensity, the wood furniture sector presents an opportunity for developing countries and their firms to participate effectively in the global economy. This paper begins with a brief description of the global wood furniture industry and highlights the importance of exports wood furniture products for developing countries and emerging and transitional economies. The paper then maps the wood furniture value chain and opens-up the nature of the buying function,...

The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

Science.gov (United States)

R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

2003-01-01

The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

Science.gov (United States)

2012-01-10

... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

Sustainable Furniture that Grows with End-Users

NARCIS (Netherlands)

Bosch, T.; Verploegen, K.; Grösser, S.N.; Rhijn, G. van

2017-01-01

Economically and environmentally it might be more responsible or even feasible to combine products and services to elongate product lifetime. Gispen, a major office furniture producer in the Netherlands, has embraced circular economic principles to create new business, extend product life time and

Kesiapan Produsen Mebel di Jepara dalam Menghadapi Sertifikasi Ekolabel (Readiness in Jepara Furniture Manufacturers in Confront of Ecolabel Certification

Directory of Open Access Journals (Sweden)

Herry Purnomo

2012-01-01

Full Text Available Furniture is a big 4 of Indonesia’s export commodities with palm oil, textiles, and rubber outside the oil and gas.Value-added is enjoyed by tens of millions of people involved in the value chain. But, the business is experiencingsevere challenges to the issue of certification and forest products (green or certified furniture and the scarcityof wood. Certified furniture is intended for preservation of forest resources, the healthy processing of furnituremaking as well as improving the welfare of artisans. From the supply side of certified furniture, large producershave been prepared while small producers are not ready. From the demand side, domestic consumers only wantto pay less for certified furniture, while British and Norway consumers are 16% 7.5% respectively. The increasein willingness to pay is lower than the certified furniture prices increased between 6–30%., Certification can bedone by a third party accredited by the Tropical Forest Trust (TFT, Indonesian Ecolabel Institute (LEI, orForest Stewardship Council (FSC. When the increase in production costs are higher than the desire of consumersto pay, then the certified furniture becomes difficult to be realized. Need specific strategies to market certifiedfurniture. This article is a case study in Jepara furniture craftsmen who accounted for 10% of national exports.Keywords: furniture certified, certification, forests, supply, demand, Jepara

Ergonomic and anthropometric consideration for library furniture in an Iranian public university.

Science.gov (United States)

Osquei-Zadeh, R; Ghamari, J; Abedi, M; Shiri, H

2012-01-01

In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. 267 (120 female and 147 male) students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into "small," "medium," and "tall" groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

Science.gov (United States)

Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

2015-01-01

Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

Directory of Open Access Journals (Sweden)

Radu Marginean

2013-12-01

Full Text Available he global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as such suffers serious structural mutations. Analyzing a series of macroeconomic indices from the European furniture industry led to the result that during the late years there has been a positive trend within the furniture industry in matters of production, however, with concern to trading, the situation is more complicated. There is a behaviour difference in the furniture industry between emergent countries and EU developed states and based on the performed analysis, a SWOT analysis at sectorial level crystallized, in which we propose ways of growth in the European furniture industry.

Wood Identification of 18th Century Furniture. Interpreting Wood Naming Inventoires

Directory of Open Access Journals (Sweden)

Rocio Astrid BERNAL

2011-09-01

Full Text Available The 18th century Portuguese church furniture represents an extraordinary richness recognised worldwide, which demands safeguarding and valorisation. The identification of the wood of furniture artworks is the most important component for its comprehension and preservation. In this work wood anatomical characters of an 18th century Portuguese decorative furniture set from the Colegiada de São Martinho de Cedofeita, in Porto, were analysed to identify the woods used for manufacturing and to clarify their common names. Furthermore, the objectives were to recognise some of the criteria for choice of wood as well as the source of each wood. The woods identified from 16 fragments belong to Apuleia sp., Acacia sp., Neolamarckia sp. and Castanea sativa. Apuleia sp. and Acacia sp. woods most likely arrived from Brazil, while the Neolamarckia sp. woods likely arrived from India and the C. sativa woods from Portugal. The results are in accordance with the known Portuguese colonial sea routes of the 15th -18th centuries. Interestingly the terms found in the inventories can refer to finishing methods instead to the name of the woods, as for instance “oil wood” can refer to “oiled wood” or “linseed oiled wood”. The species choice may be related to the mechanical properties of the wood as well as the original tree size. Two large planks of Acacia sp. were used for the top of the “Portuguese arcaz”, and Apuleia sp. was found on main structural elements of this set of furniture, suggesting that wood colour was also important. Woods from Neolamarckia sp. and C. sativa, were also identified, being Castanea wood present only in the most recent pieces of the furniture set.

The Level of Utilization of Secondary Timber Species among Furniture Producers

Directory of Open Access Journals (Sweden)

Charles Antwi-Boasiako

2016-06-01

Full Text Available Background and Purpose: Inadequate supply of wood raw material is one of the major obstacles for the global furniture industry’s growth. Several secondary timbers/Lesser-Utilized-Species (LUS that could substitute the scarce traditional timbers for furniture production exist in tropical forests. However, the industry continuously faces persistent timber shortages. The extent to which manufacturers utilize LUS as alternatives is unclear, which this study sought to ascertain. Materials and Methods: Data were collected from 300 Timber Firms from Ghana primarily through questionnaires using the stratified random sampling technique. Results: Continuous decline and non-availability of preferred traditional timbers and competition from imported furniture were the main challenges confronting the furniture industry. Data obtained indicated that most manufacturers (85% hardly use any LUS; 44% of these mentioned lack of information on their properties and prospective uses and 32% attributed it to non-availability on the domestic timber markets. However, 22% of these producers rely on traditionally ‘well-known’ timbers (e.g. mixed red wood, Guarea cedrata and Tectona grandis owing to their strength properties, 20% due to their strength and durability and 14% because of their strength and aesthetic properties. Many LUS (with prospects for furniture-making available in great quantities in many tropical forests could substitute the over-dependent timbers. However, information on their properties and uses are hardly available to local producers, which affects their popularity among timber suppliers and manufacturers. Conclusion: To improve on the level of utilization of secondary timbers, wood workers must be supplied with comprehensive information about their properties and economic values. This will contribute to reducing pressure on the primary timbers, ensuring consistent supply of timber and keeping the sector operational.

Factors and methods of analysis and estimation of furniture making enterprises competitiveness

Directory of Open Access Journals (Sweden)

Vitaliy Aleksandrovich Zhigarev

2015-06-01

Full Text Available Objective to describe the author39s methodology for estimating the furnituremaking enterprises competitiveness with a view to carry out the economic evaluation of the efficiency of furniture production the evaluation of the internal component of the furniture production efficiency the identification of factors influencing the efficiency of furnituremaking companies and areas for improving it through improvements in product range production and sales policy of the enterprise. The research subject is modern methods and principles of competitiveness management applicable in a rapidly changing market environment. Methods in general the research methodology consists of six stages differentiated by methods objectives and required outcomes. The first stage of the research was to study the nature of demand within the target market of a furnituremaking enterprise. The second stage was to study the expenditures of a furnituremaking enterprise for implementing individual production and sales strategies. The third stage was to study competition in the market. The fourth stage was the analysis of possibilities of a furnituremaking enterprise in producing and selling furniture in terms of factor values combinations. The fifth stage was the reexamination of the demand with a view to its distribution according to the factor space. The final sixth stage was processing of data obtained at the previous stages and carrying out the necessary calculations. Results in general the above methodology of economic evaluation of the efficiency of furniture production based on the previously developed model gives the managers of enterprises an algorithm for assessing both market and firmlevel component of the furniture production efficiency allowing the subsequent identification and evaluation of the efficiency factors and the development of measures to improve the furniture production and sale efficiency as well as the assortment rationalization production and sales policy

Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

Directory of Open Access Journals (Sweden)

Hasan Alizadeh

2014-11-01

Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

Directory of Open Access Journals (Sweden)

Tomas Baltuška

2016-04-01

Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

Opportunities for development of local forest markets: the case of Amish furniture manufacturing

Science.gov (United States)

Matt Bumgardner; Gary Graham; Charles. Goebel

2012-01-01

A dramatic decline in the production of hardwood furniture in the United States has had profound impacts on employment and hardwood markets. Against this backdrop, the Amish-based furniture manufacturing cluster in Ohio has expanded and hardwood lumber consumption by the cluster is significant. Recent research suggests that 71 percent of firms in the cluster expanded...

Aim for Wow-ability when Selecting Student Center Furniture.

Science.gov (United States)

Payne, Jill M.

2003-01-01

Advises colleges to keep in mind several qualities when purchasing furniture for student centers: durability, cleanability, repairability, flexibility, storability, credibility, sustainability, comfort, affordability, and "wowability." (EV)

46 CFR 169.323 - Furniture and furnishings.

Science.gov (United States)

2010-10-01

... of fire resistant materials. (b) Existing solid wooden furniture may be retained on existing vessels. (c) Draperies must be fabricated of fire resistant fabrics. (d) Rugs and carpets must be of wool or other material having equivalent fire resistant qualities. (e) Trash receptacles must be constructed of...

Impairment of nasal mucociliary clearance in woodworkers in the furniture industry

Science.gov (United States)

Black, A.; Evans, J. C.; Hadfield, Esme H.; Macbeth, R. G.; Morgan, A.; Walsh, M.

1974-01-01

Black, A., Evans, J. C., Hadfield, Esme H., Macbeth, R. G., Morgan, A., and Walsh, M. (1974).British Journal of Industrial Medicine,31, 10-17. Impairment of nasal mucociliary clearance in woodworkers in the furniture industry. Measurements of mucociliary clearance from the anterior end of the middle turbinate were made using technetium-99m-labelled particles in nine woodworkers from the furniture industry and in 12 controls, none of whom had been occupationally exposed to wood dust. Clearance rates in the controls ranged from 1·9 to 18·5 mm min-1 with a mean of 6·8. These values are in good agreement with measurements reported elsewhere for normal subjects. Only one of the woodworkers had a clearance rate which fell within the normal range and he had been occupationally exposed for the shortest period (6 years). In four woodworkers clearance was very slow (furniture industry for more than 10 years. PMID:4821406

75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

Science.gov (United States)

2010-11-26

... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

Science.gov (United States)

2010-02-05

... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

Ergonomic and Anthropometric Consideration for Library Furniture in an Iranian Public University

Directory of Open Access Journals (Sweden)

R Osquei-Zadeh

2011-12-01

Full Text Available Background: In our competing educational world, students spend a considerable part of their daily life, studying at library furniture. Not surprisingly, due to lack of proper anthropometric databases, these products have typically been ill fitted for the intended user populations. Objective: To verify the optimum anthropometric match of library furniture within an academic environment, through a combined qualitative and quantitative approach. Methods: 267 (120 female and 147 male students, were subjected to 11 standard anthropometric measurements. In line with the measurements, subjective evaluations were also considered through detailed fitting trials on selected groups of participants. Results: Combinational equations defined the unacceptable furniture dimensions according to elbow and sitting popliteal heights, mainly for smaller and taller divisions of the studied population, which were systematically comparable along with subjective and objective outcomes. In brief, if we classified studied students into “small,” “medium,” and “tall” groups, the design dimensions should be altered by -5.1, -2.2, and +1.6 cm for chair seat height; and by -8.3, -5.4, and +1.1 cm for table height, for each student group, respectively. Conclusion: The furniture size to be used by Iranian students should be changed to fit their anthropometric measures.

THE PARTICULARITIES OF THE COST CALCULATION METHOD ON COMMANDS IN FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Felicia Sabou

2014-10-01

Full Text Available The paper present the importance of the method on commands in cost calculation and the particularities of the cost calculation method on commands in the furniture industry. This paper presents a hypotetical study on the method on commands, considering the observations made during 2013-2014, on how it is organized and managed accounts management using method on commands.By presenting this hypothetical model about the accounting in management accounting using the method on commands, the paper contributes to the correct application of this method in practice, specifically in management accounting in companies from the furniture industry. In my opinion the method on commands is an appropriate method for achieving management accounting for companies that have as main activity the production of furniture. When applying the method on commands in cost calculation and in management accounting, the companies must to consider the particularities of the cost calculation, in the furniture industry, like: technical and economic factors from this sector, the technical details of each command, the codification of the commands, planning materials and labor costs for each command, monitoring and recording production costs, registration of the direct costs, distribution of the indirect costs on commands, registration of the indirect costs and registration in management accounting.

Measurement and human exposure assessment of brominated flame retardants in household products from South China

International Nuclear Information System (INIS)

Chen Shejun; Ma Yunjuan; Wang Jing; Tian Mi; Luo Xiaojun; Chen Da; Mai Bixian

2010-01-01

Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (<111 ng/g) than those for octa- and deca-BDE commercially derived PBDEs, with maximum values of 15,107 and 1,603,343 ng/g, respectively, in all the household products. Our findings suggest the recycling of old electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required.

Measurement and human exposure assessment of brominated flame retardants in household products from South China

Energy Technology Data Exchange (ETDEWEB)

Chen Shejun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Ma Yunjuan [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Zhuhai Environmental Moniorting Center, Zhuhai 519000 (China); Wang Jing; Tian Mi [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Luo Xiaojun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Chen Da [Department of Environmental and Aquatic Animal Health, Virginia Institute of Marine Science, College of William and Mary, Gloucester Point, VA 23062 (United States); Mai Bixian, E-mail: nancymai@gig.ac.cn [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China)

2010-04-15

Brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and decabromodiphenyl ethane (DBDPE) were examined in household products in the Pearl River Delta, South China, including electronic appliances, furniture and upholstery, car interiors, and raw materials for electronics. The concentrations of PBDEs derived from penta-BDE mixture were much lower (<111 ng/g) than those for octa- and deca-BDE commercially derived PBDEs, with maximum values of 15,107 and 1,603,343 ng/g, respectively, in all the household products. Our findings suggest the recycling of old electronic products and their reuse might be also a potential important source of discontinued PBDEs to the environment. DBDPE was found in 20.0% of all the samples, ranging from 311 to 268,230 ng/g. PBDE congener profiles in both the household products and raw materials suggest that some less brominated BDEs in the environment may be derived from the decomposition of higher brominated PBDEs in PBDE-containing products in process of the manufacturing, use and/or recycling. Human exposure to PBDEs from household products via inhalation ranged from 175 to 612 pg/kg bw day, accounting for a small proportion of the total daily exposure via indoor inhalation. Despite the low deleterious risk associated with household products with regard to PBDEs, they are of special concern because of the relatively higher exposures observed for young children and further work is required.

76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

Science.gov (United States)

2011-10-24

... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

Sistem Dinamis Industri Furniture Indonesia Dari Perspektif Supply Chain Management Yang Berkelanjutan

OpenAIRE

Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

2010-01-01

This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

Sistem Dinamis Industri Furniture Indonesia dari Perspektif Supply Chain Management yang Berkelanjutan

OpenAIRE

Widodo, Kuncoro Harto; Arbita, Kharies Pramudya Dwi; Abdullah, Aang

2012-01-01

This research aims to predict and describe the sustainability of Indonesian furniture development by considering 3 as- pects: economical revenue, social, and envieronment, as the main aspects in a sustainable supply chain. This research was started by identifying the basic model of supply chain of furniture industry. We, then, identified the potency and weaknesses from either internal or external, by using SWOT (strength, weakness, opportunity, threat) analysis. We used modeling and simulatio...

Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

Science.gov (United States)

Furniture Industry Research Association, Stevenage (England).

A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

Electrolytic recuperation of heavy metals and chlorine from fly-ashes and washwater of a household incinerator

Energy Technology Data Exchange (ETDEWEB)

Maes, H.; Carpels, M.; Elslander, H.; Van Houtven, D.; Vereecken, J.; Kinnaer, L.; Hermans, N.; Gielen, C.; Van Kerckhoven, M.; Raats, L. [Vlaamse Instelling voor Technologisch Onderzoek (VITO), Mol (Belgium)

1995-12-31

The treatment and processing of the residues which result from the household incineration process were investigated in a study conducted in Belgium. Incineration produces large amounts of solid residue, particularly fly-ash, which contains a large degree of heavy metals. Also, the large amount of acid washwater flow which comes from the gas washer is highly concentrated with chlorine, and heavy metals. Presently, both the fly-ash and the wastewater are dumped at disposal sites. Two objectives for waste management were presented. The first was to improve the fly-ash for potential use as, for example, filler in road surfaces. The second was to reduce the wastewater flow and to use neutralizing reagents or an electro-chemical treatment on the washwater, in order to recuperate the chlorine. The fly-ash was treated by leaching with the acid washwater. The leached heavy metals were recuperated by electrolysis. It was concluded, however, that electrolytic recuperation of heavy metals from fly ash was not economically feasible. 2 refs., 7 tabs., 8 figs.

Application of E-commerce based Internet Plus Strategy in the Chinese Furniture industry with analysis on case study and business model canvas

OpenAIRE

Cheng, Yun

2016-01-01

Furniture is one of the most important necessities in people’s daily life. The development of furniture industry can also be regarded as the progress of society. China is the world’s biggest furniture manufacturer and exporter. After the rapid development in past few decades, the production, technology and quality of furniture has already mature. However, the traditional marketing models are showing disadvantages. It is important for furniture companies to explore profitable marketing models ...

FORMULATING ULTRA-LOW-VOC WOOD FURNITURE COATINGS

Science.gov (United States)

The article discusses the formulation of ultra-low volatile organic compound (VOC) wood furniture coatings. The annual U.S. market for wood coatings is about 240, 000 cu m (63 million gal). In this basis, between 57 and 91 million kg (125 and 200 million lb) of VOCs are emitted i...

Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

Science.gov (United States)

de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

2012-01-01

The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

FINANCIAL LIQUIDITY OF THE FURNITURE INDUSTRY COMPANIES IN POLAND IN 2006–2013

Directory of Open Access Journals (Sweden)

Zbigniew Gołaś

2015-12-01

Full Text Available The aim of the study was to present the diversity and conditions of companies’ liquidity in the Polish furniture industry. In the analysis, the statistical data, CSO, 2006–2013 for the furniture manufacturing enterprise sector (Chapter 31 manufacturing, PKD 2007 was used. The carried out analysis showed that the furniture industry companies in Poland in the years 2006–2013 in general had the ability to meet their current liabilities. Current and quick liquidity developed for them on a stable and positive level, coinciding with the recommendations of the theory of fi nance. However, from the working capital cycle’s point of view, the assessment of liquidity furniture manufacturing sector is clearly less favourable, and it results from relatively long collecting dues cycles ranging close to 60 days. The less favourable assessment comes from the fact that the long collecting dues cycles have eff ects on exceeding duration of the recovery measures’ applications, which in turn, may turn into a build-up of the payment backlogs, and thus into reductions of the ability to fi nance business and into the risk of production’s reduction

Desain Dan Implementasi Augmented Reality Berbasis Web Pada Aplikasi Furniture Shopping Manager Sebagai Alat Bantu Belanja Online

OpenAIRE

Pramono, Basworo Ardi

2012-01-01

Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya. FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online. Aplikasi FSM dikembang...

DESAIN DAN IMPLEMENTASI AUGMENTED REALITY BERBASIS WEB PADA APLIKASI FURNITURE SHOPPING MANAGER SEBAGAI ALAT BANTU BELANJA ONLINE

OpenAIRE

Basworo Ardi Pramono

2012-01-01

Dalam penulisan jurnal ini akan dibahas mengenai pengembangan aplikasi Furniture Shopping Manager (FSM) sebagai suatu alat bantu yang dapat dimanfaatkan oleh para pemilik situs atau toko furniture secara online dalam menjual produknya.  FSM dirancang sebagai sebuah aplikasi berbasis web yang terintegrasi ke dalam suatu situs belanja online dengan fitur-fitur yang diharapkan dapat memberikan pengalaman yang baru, unik dan menarik dalam kegiatan belanja furniture online.   Aplikasi FSM dike...

Development of an ergonomics guideline for the furniture manufacturing industry.

Science.gov (United States)

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Evaluation of Airborne MDF Dust Concentration in Furniture Factories

Directory of Open Access Journals (Sweden)

Renilson Luiz Teixeira

2017-10-01

Full Text Available ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF. The experiment was developed in the MDF cutting sector of three furniture factories located in the city of Lavras/MG. The results showed that the mean concentrations of total dust suspended in these three furniture factories were above the tolerance limit set by the American Conference of Governmental Industrial Hygienists (ACGIH, giving evidence of a serious problem in these companies related to this type of risk agent.

Wood Dust in Joineries and Furniture Manufacturing: An Exposure Determinant and Intervention Study.

Science.gov (United States)

Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

2017-05-01

To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop, implement, and evaluate a cost-effective and practicable intervention to reduce dust exposures. Personal inhalable dust (n = 201) was measured in 99 workers from 10 joineries and 3 furniture-making factories. To assess exposure determinants, full-shift video exposure monitoring (VEM) was conducted in 19 workers and task-based VEM in 32 workers (in 7 joineries and 3 furniture factories). We assessed the efficacy of vacuum extraction on hand tools and the use of vacuum cleaners instead of sweeping and dry wiping under laboratory conditions. These measures were subsequently implemented in three joinery workshops with 'high' (>4 mg m-3) and one with 'low' (joinery and furniture making were 2.5 mg m-3 [geometric standard deviations (GSD) 2.5] and 0.6 mg m-3 (GSD 2.3), respectively. In joinery workers cleaning was associated with a 3.0-fold higher (P joineries, a borderline statistically significant (P joinery workers and (to a lesser extent) furniture makers with frequent use of hand tools and cleaning being key drivers of exposure. Vacuum extraction on hand tools and alternative cleaning methods reduced workplace exposures substantially, but may be insufficient to achieve compliance with current occupational exposure limits. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Vitaliy A. Zhigarev

2015-01-01

Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

A REVIEW OF OIL PALM BIOCOMPOSITES FOR FURNITURE DESIGN AND APPLICATIONS: POTENTIAL AND CHALLENGES

Directory of Open Access Journals (Sweden)

Siti Suhaily,

2012-07-01

Full Text Available This review considers the potential and challenges of using agro-based oil palm biomasses, including the trunk, frond, empty fruit bunch, and palm press fiber biocomposites, for furniture applications. Currently, design and quality rather than price are becoming the primary concern for consumers when buying new furniture. Within this context, this paper focuses on the design of innovative, sustainable furniture from agro-based biocomposites to meet the needs of future population growth and technology. This research also discusses the need for biocomposite materials that do not depend on the growth of populations, but on the growth and development of the economy. This study focuses on globally available agro-based biocomposites, especially those from oil palm biomass: plywood, medium density fiberboard (MDF, wood plastic composite (WPC, laminated veneer lumber (LVL, oriented strand board (OSB, hardboards, and particleboard. Additional positive aspects of biocomposites are their environmentally friendly character, high quality, competitive design, and capacity to improve the value proposition of high-end products. These attributes increase the demand for agro-based biocomposite furniture on the international market.

Ikea success in chinese furniture

OpenAIRE

Yihong, Li

2007-01-01

This thesis will focus on the market exploiting and development of IKEA in China, analysis the characteristics of Chinese market and the supply-demand of the IKEA products in China. It also analyze the main Chinese consumers’ behaviour and evaluating the furniture retail market in China. IKEA is a successful case to open the china market recent years. The main goal is to acquire this information in order to provide the overseas retailers with a good starting point for creating an effective bu...

Changes and development of product line : Case: P. Rotola-Pukkila Oy's products, furniture trends and competitors

OpenAIRE

Rotola-Pukkila, Ida

2016-01-01

The purpose of this thesis is to study what kinds of changes and developments have been done in furniture manufacturer P. Rotola-Pukkila Oy’s Timantti and Laatupaneeli products and colour options between the years 1970−2016. Another objective is to study the trends on furniture and interior design field, as well as to study how the company’s products compete on the market. Concepts related to company’s history, products, collections and colour options as well as the history of furniture f...

Mr Drage, Mr Everyman, and the creation of a mass market for domestic furniture in interwar Britain

OpenAIRE

Peter Scott

2007-01-01

This paper examines strategies used by durable goods retailers to create a mass market in interwar Britain, via a case-study of domestic furniture. Interwar demand for new furniture witnessed particularly rapid growth - mainly owing to the extension of the market to lower-income groups. A number of innovative national retailers eveloped liberal HP facilities to bring furniture within the economic reach of these groups, while sophisticated national advertising campaigns were used to both legit...

STUDY ABOUT A FURNITURE COMPANY THAT USES NEW TECHNOLOGIES AND COMPUTERIZED EQUIPMENT

Directory of Open Access Journals (Sweden)

PUSTIANU Monica

2015-05-01

Full Text Available In Romania, there are companies that uses new technologies and computerized equipment leading to obtaining high quality products and profit. Furniture industry has continuously developed due to high demand for diversified products for all age groups. Romanian goods shall be delivered both in the country and abroad. The tapestries furniture made in our country, classical or modern, by leather in different colours or with textile coating materials fashionable chosen is already enjoying much attention from the external and internal customers. The workforce employed in the furniture manufacturing industry is qualified, managed to shape the wood into complex and elegant products that are able to give full satisfaction to all consumers SWOT analysis is defined as a complex research of economic aspects, technical, sociological, legal and managerial aspects that characterize the activity of a company and allows the formulation of an opinion on the past and present condition of the company. SWOT analysis may be carried out both at the level of functional areas of the company: financial, commercial, production, human resources, research and development, management and at the level of firm as a whole. By this analysis was obtained a clear picture of the current state of the analysed company, helping to knowledge and understanding of the general context in which the company operates. Key words: quality, furniture, management, production, analysis, SWOT

75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

Science.gov (United States)

2010-07-29

... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

AN ASSESMENT OF CURRENT EMPLOYMENT NEEDS IN THE ROMANIAN FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Cristinel Petrişor CONSTANTIN

2015-12-01

Full Text Available The paper presents the results of an exploratory survey among Romanian companies from the furniture industry. The study aimed to identify: (1 respondents’ opinions regarding the main competences that a candidate needs to prove in order to be hired; (2 attitudes regarding the competences of the graduates from the Wood Engineering Faculty, Transilvania University of Brasov; and (3 main current employment needs of Romanian furniture industry. The results indicated that the highest importance in the selection of employees is given to transversal competences such as: orientation to quality; learning capacity; and availability for self-development, team working; and involvement in meeting customers’ requirements. The interviewed representatives of the studied companies mainly need skilled workers in the furniture industry but also engineers able to manage the company’s processes, or to design certain processes and products. The results of the present study may be used by the Wood Engineering Faculty in their attempt to adapt the academic curriculum and course contents; and give their graduates a chance to acquire relevant competences which may enhance their employability.

77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

Science.gov (United States)

2012-08-27

... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

Science.gov (United States)

2010-12-30

..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

Science.gov (United States)

2011-08-11

..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

Science.gov (United States)

2011-11-03

... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

Science.gov (United States)

2010-04-14

... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

The structural analysis of small and medium size furniture ...

African Journals Online (AJOL)

STORAGESEVER

2008-12-17

Dec 17, 2008 ... furniture enterprises in Turkey based on production, capacity use and .... has important structural, organizational and technological deficiencies, but it has .... the equipment they need change in compliance with the order they ...

Importance of Logistics Processes for Customer Service and Firm Performance: Evidence from Furniture Industry of Pakistan

Directory of Open Access Journals (Sweden)

Imran Qadir

2017-11-01

Full Text Available Research Question: This study examines the relationship between logistics processes, customer service and firm performance in the furniture industry of Pakistan. Motivation: Furniture industry in Pakistan comprises small and medium enterprises wherein production is mainly labor intensive. Therefore, the current study also investigates the mediating role of manufacturing flexibility for the relationship of logistics processes and customer service. The paper applies the logistics models developed by Bowesox (1974, Green et al.(2008, and Tracey (1998 to furniture industry. Idea: The core idea of the paper is to measure the effects of logistics process on customer service and the performance of furniture manufacturing firms. The study takes the logistics process as an independent variable, the customer service as the first dependent variable and manufacturing performance as a moderating variable. Data: Primary data on logistics, customer service, manufacturing flexibility and firm performance were conveniently collected through a questionnaire from owners/managers of 61 furniture manufacturing firms. Tool: Descriptive statistics, correlation and regression analyses were run to draw the results. Findings: Logistics processes positively affect customer service and firm performance. Customer service also exerts a positive effect on firm performance while the moderating role of manufacturing flexibility was not supported for the relationship of logistics processes and customer service. Contribution: Through efficiency in logistics processes, furniture manufacturing firms can serve customers in a superior way to ultimately achieve improved firm performance. The framework being restricted to efficiency of logistics processes only constitutes an important limitation of the study.

Transitioning Wood Furniture Products towards Sustainability

OpenAIRE

Lu, Lei; Zhang, WeiGuang; Zhang, WeiQing

2008-01-01

Wood Furniture Products (WFPs) play a significant role in both the global economy and the transition of society towards sustainability. This paper begins with a brief description of the industry and highlights the current challenges and compelling measures of WFPs from a systems perspective through the lens of the Framework for Strategic Sustainable Development (FSSD) and by applying backcasting from sustainability principles (SPs). An examination of the challenges and opportunities of WFPs i...

Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

OpenAIRE

Lidia Martínez Murillo

2007-01-01

Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

How clustering dynamics influence lumber utilization patterns in the Amish-based furniture industry in Ohio

Science.gov (United States)

Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

2011-01-01

Preliminary studies have suggested that the Amish-based furniture and related products manufacturing cluster located in and around Holmes County, Ohio, uses sizeable quantities of hardwood lumber. The number of firms within the cluster has grown even as the broader domestic furniture manufacturing sector has contracted. The present study was undertaken in 2008 (spring/...

Aspects of the furniture industry in Ireland

OpenAIRE

Heanue, Kevin

2009-01-01

This dissertation examines aspects of networking, industrial organisation, innovation, and industrial agglomeration in the Irish furniture manufacturing industry. With its focus on firm behaviour, industrial organisation and industrial structure the research is located within the tradition of industrial economics. Based on heterodox economic perspectives and utilising a variety of methods (albeit principally case study based), the dissertation provides new theoretical and empirical knowle...

Ergonomic suitability of kitchen furniture regarding height accessibility.

Science.gov (United States)

Hrovatin, Jasna; Prekrat, Silvana; Oblak, Leon; Ravnik, David

2015-03-01

It is possible to significantly ease kitchen chores with properly sized and appropriately arranged cupboards. In designing kitchen furniture and the optimal depth and the height of storage capacities, accessibility should be taken into consideration. It is known that the optimal storage zone is between 800 and 1100 mm and that there is reduced visibility and accessibility at the level between 1400 and 1700 mm, which is even more prominent for the elderly. This suggests that wall cabinets are not recommended for the elderly. The aim of this study was to determine to what extent kitchens manufactured by Slovenian furniture manufacturers are suitable for users of different age groups with regard to the accessibility of goods stored in the cupboards. Furthermore, based on the measurement analysis, recommendations are provided for designing kitchen furniture that would meet the needs of the elderly. The study, carried out using a computer simulation model, analyzed the products of three Slovenian kitchen manufacturers. The cross section of accessibility in the wall cabinets was determined for different age groups of men and women. The results show that the efficacy of the volume in wall cabinets higher than 600 mm, in comparison to places where objects are easily reachable, is 30% lower for women, thus indicating the inefficiency of storage space in wall cabinets. In terms of accessibility, existing kitchens are not optimal for the elderly, and a model with a deeper worktop and wall cabinets lowered onto the worktop is proposed. Accessibility in such wall cabinets is increased by up to 70% if the body is moved forward by 30°.

78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

Science.gov (United States)

2013-10-02

... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

Does Saudi school furniture meet ergonomics requirements?

Science.gov (United States)

Ramadan, Mohamed Zaki

2011-01-01

The goal of this research was to study the effect of adjustable imported desk and chair combinations available in the market on student performance. Six sets of chairs and tables within three different activities (reading, writing, and looking to the blackboard) were the independent variables. Evaluation of back force at 5th lumbar vertebrae and the 1st sacrum (L5/S1), subjective measures of discomfort, and the mismatch between student body dimension and classroom furniture analysis were measured. A total of 124 young male students (first through sixth-grade) participated in this experiment. The results revealed too low or too high chair and table heights relative to the students' body dimensions increased the stresses acting at L5/S1 as well as discomfort ratings. This study indicated there was a high level of body mismatch in desk-chair combinations even with the adjustable imported furniture available in the local market. Anthropometric data of Saudi students should be collected from different regions in the Kingdom and then design and development of desk-chair combinations could follow the development of a standard procedure to adapt to the needs of Saudi school children.

76 FR 57713 - Wooden Bedroom Furniture From the People's Republic of China: Amended Final Results of...

Science.gov (United States)

2011-09-16

... appearance on behalf of Liberty Furniture Industries Inc. (``Liberty'') on August 17, 2011. The law firm also... Department: (1) Left out the word ``Dongguan'' when it listed the entity ``Dongguan Cambridge Furniture Co., Ltd., Glory Oceanic Co., Ltd.'' (``Cambridge'') in the rate table of the Final Results; (2) did not...

Investigating the Effective Index on Customers Choice in Buying Furniture

Directory of Open Access Journals (Sweden)

Hossein Rangavar

2014-05-01

Full Text Available The competitive world today, with increasing customers satisfaction and expanding the definition of hosting and its direct connection with quality of products is essential. Thus not only the current customers stay fixed but also it increases. The purpose of this study was to investigate and ranking the crucial indicators that influence the choice of furniture by customers. Because of this, the studied indexes are classified in 6 group: quality, beauty, design, creating a suitable atmosphere for selling the goods, selling conditions and advertising. Population consisted of three major commercial areas in Tehran (Delawaran, Hassan Abad and Yaftabad. Statistical sample consisted a number of 100 people. A questionnaire was developed to gather data. Reliability of the questionnaires has been approved through Cronbach's Alpha coefficient (0.921. Investigation of effective indexes was done by chi-square method and in order to final ranking the indexes, friedman analyses have been used. The results obtained of ranking showed the chief factor in customers choice is under category of beauty due to this elegancy role in customers point of view. After elegancy, according to the classified elements studied in this research, raw material in making furniture, wood production’s price, ergonomy, customers satisfaction for his last purchase and immediate delivery, respectively, are the most important effective index in buying furniture by consumer.

Development of Modular Outdoor Furniture Product Using Lightweight Concrete for Public Parks in Surabaya

Science.gov (United States)

Mulyono, Grace; Thamrin, Diana; Antoni

2017-09-01

The development of public parks into green city facilities in Surabaya has triggered the need of outdoor furniture designs that can resist the tropical wet and dry weather conditions while also having a certain mobility to support flexible park arrangement. However, present furniture designs made of concrete material are generally heavy and immovable. Flexible designs are needed for various activities that can take place at the same time such as sitting and playing, and to support changes in arrangement to keep the green open spaces attractive from time to time. This research develops the idea of a modular outdoor furniture design using cellular lightweight concrete (CLC) as the main material as a result from observing its resistance towards weather change and its relative light weight. It starts with analysis of problems, formulation of design concept, creation of design alternatives, selection of design, calculation of mouldings, adaptation of design to the mouldings and production of a scaled mock-up using CLC. Findings of this research reveal that the modular design along with the CLC material used not only support the flexibility of change in function and arrangement but also make these furniture resistant to the hot and humid weather of Surabaya.

A producer survey on Turkish furniture industry

OpenAIRE

Öğün, Emir Polat

1996-01-01

Ankara : The Department of Management and Graduate School of Business Administration of Bilkent Univ., 1996. Thesis (Master's) -- Bilkent University, 1996. Includes bibliographical references leaves 79-80. Turkish furniture industry has been growing steadily since the liberalization of Turkish economy in early 1980’s. However, the industry faces some technological and economical problems which affects the competitiveness of the firms in the global market. The major problems ...

Use of design as competitive advantage in the furniture industry at Santa Maria/RS

Directory of Open Access Journals (Sweden)

Leoni Pentiado Godoy

2012-08-01

Full Text Available This article shows the contribution of innovative and proactive professional design to increase the competitiveness of the supply chain sector. Thus, the question that motivates the study were: how the design as a strategy, aligned to quality, can act as a competitive to micro and small enterprise in the furniture sector? The study conducted individual interviews with furniture industry managers and used questionnaires to furniture consumers in Santa Maria, located in the center of Rio Grande do Sul State. The research has shown that the search for mechanisms that create competition between companies is increasingly intense and the race for innovative methods to achieve efficiency has great importance. The design adds value to product in terms of aesthetics, ergonomics, comfort and functionality, besides being a very important element in the rationalization of production

Bending stress modeling of dismountable furniture joints applied with a use of finite element method

Directory of Open Access Journals (Sweden)

Milan Šimek

2009-01-01

Full Text Available Presented work focuses on bending moment stress modeling of dismountable furniture joints with a use of Finite Element Method. The joints are created from Minifix and Rondorfix cams combined with non-glued wooden dowels. Laminated particleboard 18 mm of thickness is used as a connected material. The connectors were chosen such as the most applied kind in furniture industry for the case furniture. All gained results were reciprocally compared to each other and also in comparison to experimental testing by the mean of stiffness. The non-linear numerical model of chosen joints was successfully created using the software Ansys Workbench. The detailed analysis of stress distribution in the joint was achieved with non-linear numerical simulation. A relationship between numerical si­mu­la­tion and experimental testing was showed by comparison stiffness tangents. A numerical simulation of RTA joint loads also demonstrated the important role of non-glued dowels in the tested joints. The low strength of particleboard in the tension parallel to surface (internal bond is the most likely the cause of the joint failure. Results are applicable for strength designing of furniture with the aid of Computer Aided Engineering.

Metalúrgica Longra (1920-1993 : ancoragem para um estudo sob os regimes de acção

Directory of Open Access Journals (Sweden)

M. Otília P. Lage

2007-01-01

Full Text Available Built upon two levels – the factual and the critically referential –, this history of Longra Steelworks (Metalúrgica da Longra – M.L.: workshop, factory, company – congregates a diversified plurality of discourses united in empirical and theoretical research, a documentary corpus necessary for the factory’s structural approach. Appearing in 1920, in a rural space (Felgueiras, in 1970 is one of Portugal’s leading companies in the office furniture and industrial furniture design sector.

Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

Directory of Open Access Journals (Sweden)

Jegatheswaran Ratnasingam

2016-04-01

Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

Marketing Strategy Analysis for Small and Medium Scale Business Enterprise (SMEs) for Home Industry Furniture in Leilem, the Regency of Minahasa

Science.gov (United States)

Pangemanan, S. A.; Walukow, I. M.

2018-01-01

Leilem is a small village located in Minahasa Regency. This village is well known for furniture products made of Timber. Eventhough the village has been producing various furniture products with high quality since many decades ago, it has not been able to compete with other new entries such furniture from Java, Synthetic Ratan, Plywood and plastic based furniture. The monotonous design and the finishing works done on the furniture have been some of the major issues in the decline of home furniture. The research explores problems and challenges faced by the furniture home Industry. It will also aim at identifying the internal and external factors that prevent the home industry to compete and survive. In the end the research will develop the strategic positioning of the home industry in the midst of competition. The research methodology employs descriptive analysis in which data are collected through observation, interview, and questionnaire. This methodology is combined with IFE (Internal Factor Evaluation) and EFE (External Factor Evaluation) Matrix, SPACE Matrix and SWOT Analysis and QSPM (Quantitative Strategic Planning Matrix). The sample is 66 business people, of 823 craftsmen who are working in this business. The result shows this home industry is very competitive in terms of consistency, but in terms of promotion, product quality, price, product diversification, design training of furniture, management and economic scale, it is lagging behind. The home industry should be able to develop marketing networking, improve design and product quality, promotion and cost control, product diversification and these can only be done by intensive training in managing business and investment.

Realization of FRC interior and exterior furniture

Science.gov (United States)

Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

2017-09-01

This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

Analisis Praktik Corporate Social Responsibility Perusahaan Furniture di Kabupaten Jepara

Directory of Open Access Journals (Sweden)

Aida Nahar

2015-12-01

Full Text Available Corporate social responsibility (CSR is a transparent business practices, which are based on ethical values, with particular attention to employees, communities and the environment, and designed to meet the wishes of the shareholders and the public in general. Effort to understand and analyze the practice of CSR in a company is interesting, considering the practice of CSR is not a uniform practice and its implementation is highly dependent on the unique characteristics inherent in the company. The purpose of this study is to investigate to find out the practice of Corporate Social Responsibility by furniture companies in Jepara. Data collection methods used in this study were interviews, direct observation, and analysis of company documents. Data were analyzed by triangulation and interpretation. From the research conducted it can be concluded that the comapany’s motivation in implementing CSR undertaken by the company from Jepara regency furniture is the company’s commitment and enhance the reputation of the company. While the practice of CSR that have been made furniture enterprises in Jepara regency consists of several fields, namely a. economy, including internal and external sectors. Internal sector is focused on training programs for employees. The external sector was focused on facilitating the community development patterns, community groups, and cooperatives. b. Social areas, including the provision of public facilities (infrastructure development, social welfare, education and sports. c. Environment areas, including sustainable water supply.

AN INVESTIGATION ON THE CUSTOMER RELATIONSHIP MANAGEMENT IN FURNITURE STORES

Directory of Open Access Journals (Sweden)

İlker Akyüz

2004-11-01

Full Text Available The most valuable thing for corporations is customers in today’s competitive environment. The evaluation obtained with suitable methodology is important vitally in the success of customer relationship management systems applied for the continuous customer satisfaction and devotion. Continuous customer satisfaction, development of communication skills with customers, caring with customers’ desires and compliments before and after sale just in sale time, development of the quality of services being offered to the customers is dependent on the determining customer problems closely and giving customer focused services. In this study, it was tried to reveal the customer relationship management, communication with customer, customer focused sale offered before, after and just in sale time in some furniture stores located in Trabzon. It was found that the furniture stores in Trabzon have been generally trying to give customer focused sale services

Assessment of office furniture and knowledge of work ergonomics ...

African Journals Online (AJOL)

Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

Analysis of the most relevant anthropometric dimensions for school furniture selection based on a study with students from one Chilean region.

Science.gov (United States)

Castellucci, H I; Arezes, P M; Molenbroek, J F M

2015-01-01

Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

DEMONSTRATION OF NO-VOC/NO-HAP WOOD FURNITURE COATING SYSTEM

Science.gov (United States)

The United States Environmental Protection Agency has contracted with AeroVironment Environmental Services, Inc. and its subcontractor, Adhesives Coating Co., to develop and demonstrate a no-VOC (volatile organic compound)/no-HAP (hazardous air pollutant) wood furniture coating s...

Radiation technology in finishing process improves health, safety and environment (HSE) in the furniture manufacturing industry

International Nuclear Information System (INIS)

Ahmad Shakri Mat Seman

1999-01-01

In furniture manufacturing, processes like cross cutting, molding, planning, shaping, turning, assembling and finishing are involved. The most significant types of negative impact of these processes are such as dust emission, noise, hazardous work, health risk, emission of organic solvent, toxic chemicals emission and chemical waste. In the finishing process, a number of negative effects that will cause health, safety and environmental (HSE) performance. This article highlights the environmental problems in the furniture finishing processes and how the radiation technology can reduce these negative impacts. The drawbacks that hamper the manufacturers from adopting this technology are also discussed. The objective of the paper is to create the awareness among the industrialist and consumers on the HSE hazardous in furniture finishing and steps can be taken to improve

Explaining the Criteria of Designing Urban Furniture and Landscape, with a Cultural-social Design Approach

Directory of Open Access Journals (Sweden)

Marzieh Allahdadi

2017-09-01

Full Text Available Attention to the deep relationship between human personality and the place in which he lives causes the place to play a crucial role in cultural transformations and prevalence of human life style and formation of values, connections and human activities. Cities are not just a place of transit, but they are also environments that must have mutual communications with the inhabitants in order to realize the meaning of citizen, as there is a distinction between the status of citizenship and urbanization. Urban furniture is one of the elements of urban space that its quantity, beauty and durability play a major role in achieving a healthy and favorable city and satisfies the needs of citizens in terms of performance and beauty. Accordingly, the present study, using descriptive-analytical method and with data collection tools including library and documentary studies, examines the concept of product ecology and answers to the questions whether urban furniture can start or support social interaction or positively affect the roles of citizens? In this paper, the relationship between social-cultural design in urban furniture and the disturbances regarding uneven distribution of elements are identified, and finally the criteria of designing urban furniture and landscape are expressed with a social-design approach.

A research on the preferences of material and size in the Turkish kitchen furniture industry

Directory of Open Access Journals (Sweden)

Tuncer Dilik

2017-11-01

Full Text Available This study intended to investigate the interaction developing rapidly through the impact of globalization experienced in every field on the material and size preferences of the kitchen furniture sector. The results of the survey conducted on the Turkish kitchen furniture manufacturers were evaluated within the framework of the international kitchen trends. As a result it was seen that the most preferred kitchen area was between 8 and 11 m2 regarding the distribution of the kitchen areas in Turkey. A tendency of using MDF in the production of the kitchen cabinets was observed with 61.8% in relation with the body material preferred to be used in the kitchen furniture sector. The preferred body sizes of the kitchen cabinet was determined by considering the width and height preferences of both the upper and lower cabinets, the size of 61-90 cm seemed to be the most preferred sizes both for the upper and lower cabinets. According to the height, 72 cm size was found to be the most preferred size. While the most preferred size among the cellar cabinets was determined to be smaller than 60 cm, its height was revealed to be bigger than 200 cm. The most preferred kitchen furniture base was detected to be 12 cm.

Proposal for the Award of a Blanket Order for the Supply of Office Furniture

CERN Document Server

1999-01-01

This document concerns the award of a blanket order for the supply of office furniture. Following a market survey carried out among 87 firms in seventeen Member States, a call for tenders (IT-2590/SPL) was sent on 5 November 1998 to nine firms in four Member States. By the closing date, CERN had received seven tenders. The Finance Committee is invited to agree to the negotiation of a contract for the supply of office furniture with the company A+Z Bürosysteme (DE), the lowest bidder complying with the specification, up to a total amount of 1 600 000 Swiss francs, not subject to revision until 30 March 2000, for an initial period of three years, with an option to renew the contract for two further one-year periods. A+Z Bürosysteme has declared the following origin of the furniture covered by this adjudication proposal: DE - 90% and CH - 10%.

Household Hazardous Waste

Science.gov (United States)

... waste collection" near your zip code in the Earth 911 database Exit for more information. Contact your ... lemon juice in one pint of mineral or vegetable oil and wipe furniture. Rug Deodorizer Liberally sprinkle ...

POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

Science.gov (United States)

This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

Source emission and model evaluation of formaldehyde from composite and solid wood furniture in a full-scale chamber

Science.gov (United States)

Liu, Xiaoyu; Mason, Mark A.; Guo, Zhishi; Krebs, Kenneth A.; Roache, Nancy F.

2015-12-01

This paper describes the measurement and model evaluation of formaldehyde source emissions from composite and solid wood furniture in a full-scale chamber at different ventilation rates for up to 4000 h using ASTM D 6670-01 (2007). Tests were performed on four types of furniture constructed of different materials and from different manufacturers. The data were used to evaluate two empirical emission models, i.e., a first-order and power-law decay model. The experimental results showed that some furniture tested in this study, made only of solid wood and with less surface area, had low formaldehyde source emissions. The effect of ventilation rate on formaldehyde emissions was also examined. Model simulation results indicated that the power-law decay model showed better agreement than the first-order decay model for the data collected from the tests, especially for long-term emissions. This research was limited to a laboratory study with only four types of furniture products tested. It was not intended to comprehensively test or compare the large number of furniture products available in the market place. Therefore, care should be taken when applying the test results to real-world scenarios. Also, it was beyond the scope of this study to link the emissions to human exposure and potential health risks.

Attitudes of U.S. retailers toward China, Canada, and the United States as manufacturing sources for furniture: an assessment of competitive priorities

Science.gov (United States)

Urs Buehlmann; Matthew Bumgardner; Torsten Lihra; Mary Frye

2006-01-01

While much has been written regarding the declining global competitiveness of U.S. furniture manufacturing and the subsequent loss of domestic market share and jobs, less is known about the role of retailers in furniture importing. This study investigated the attitudes of U.S. furniture retailers toward China, Canada, and the United States as manufacturing sources for...

A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

OpenAIRE

and Shalihuddin Djalal Tandjung, Muh. Hisjam Adi Djoko Guritno

2012-01-01

Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM) model is proposed as an approach for solutions fo...

Foreign subsidiary development of furniture industry in the context of global recession: case of Vietnam

OpenAIRE

Hoang, Ngoc

2014-01-01

Wooden furniture industry is a traditional low-technology based and labor intensive industry (Kaplinsky & Readman, 2000), which is highly recommended for global outsourcing. Besides, the raising of “China plus one” manufacturing strategy made Southeast Asian countries became new investment destinations. In case of Vietnam, the largest exporter of wood products in Southeast Asian, wooden furniture industry is highly export-oriented with a fast growing rate especially since 2008 (MARD, 2012). W...

Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

NARCIS (Netherlands)

Flore, F.M.W.

2013-01-01

After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

The Creation Of Furniture Products Design From Stem Waste Of Sugar Palm Tree (Arenga Pinnata

Directory of Open Access Journals (Sweden)

I Wayan Seriyoga Parta

2017-11-01

Full Text Available Sugar Palm tree (Arenga Pinnata is one of potential natural resources that can be used as a based material of furniture products. But, this sugar palm tree potential hasn’t exploited maximally and only throws away as a waste that contaminates the environment. On the other side, woods that have been used as based material of furniture products are getting rare and expensive. Based on that problem, this research is aimed to design new furniture products models that exploite the stem waste as a prominent based material.  This research uses experiment method with steps: 1 finding and formulating concepts of furniture products design creation based on analysis towards the stem waste of sugar palm tree characteristics; 2 implementing of finding concepts to become furniture products models from stem waste of sugar palm tree. As a result of the research, it is found “tube” concept and tatah carved concept as a right concept to be applied in creation of furniture products from stem waste of sugar palm tree. Implementing of “tube” concept and tatah carved concept is made successfully in shape of some furniture products design such as:  table model, chair model and wardrobe model. Realization of these designs has concerned with the use of sugar palm tree as a prominent based material. According to the result of evaluation, all of these designs are deserved to be made. So, it is concluded that to anticipate the qualified wood as a based material of furniture products, we can use stem waste of sugar palm tree as alternative based material. Pohon aren (Arenga Pinnata merupakan salah satu sumber daya alam yang potensial digunakan sebagai bahan baku produk mebel. Akan tetapi, potensi batang pohon aren itu belum dimanfaatkan secara maksimal dan hanya terbuang menjadi limbah yang mengotori lingkungan. Di sisi lain, kayu yang selama ini dimanfaatkan sebagai bahan baku produk mebel keberadaannya makin langka dan mahal. Bertolak dari permasalahan itu

Perceptions of firms within a cluster regarding the cluster's function and success: Amish furniture manufacturing in Ohio

Science.gov (United States)

Matthew S. Bumgardner; Gary W. Graham; P. Charles Goebel; Robert L. Romig

2011-01-01

The Amish-based furniture manufacturing cluster in and around Holmes County, OH, is home to some 400 shops and has become an important regional driver of demand for hardwood products. The cluster has expanded even as the broader domestic furniture industry has declined. Clustering dynamics are seen as important to the success, but little information has been available...

Ergonomic Based Design and Survey of Elementary School Furniture

Science.gov (United States)

Maheshwar; Jawalkar, Chandrashekhar S.

2014-01-01

This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

OpenAIRE

Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

1983-01-01

This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

U.S. Competitiveness Study: How Furniture and Cabinet Manufacturers Compare

Science.gov (United States)

Urs Buehlmann; Matthew Bumgardner; Al Schuler; Rich Christianson

2003-01-01

A disturbing 37.2%, of the 341 manufacturing executives participating in the U.S. Wood Competitiveness Survey either strongly agreed or agreed "that by the end of the decade, little will remain of domestic wood furniture and other wood products manufacturing in the United States."

Prevent Tipping Furniture from Injuring or Killing Young Children

Science.gov (United States)

... more upsetting than the sudden death of a child — killed by a piece of a furniture, appliance or a television falling on them. “It can happen in a ... be secured. Check with home improvement stores or child retail stores and ask experts what they ... television and computer equipment low to the ground. Do ...

Analysis of black japanned furniture by XRF

Energy Technology Data Exchange (ETDEWEB)

Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P., E-mail: valter.felix@ifrj.edu.br, E-mail: renato.freitas@ifrj.edu.br, E-mail: annalecastro@hotmail.com [Instituto Federal do Rio de Janeiro (LISCOMP/IFRJ-CPAR), Paracambi, RJ (Brazil). Lab. de Instrumentação e Simulação Computacional; Pereira, Marcelo O.; Carvalho, Cristiano S.; Silva, Fabricio L., E-mail: marcelocefetrj@gmail.com [Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (CEFET), Nova Iguaçu, RJ (Brazil)

2017-07-01

Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

Analysis of black japanned furniture by XRF

International Nuclear Information System (INIS)

Felix, Valter de S.; Oliveira, Ana L.C. de; Freitas, Renato P.

2017-01-01

Currently, X-ray fluorescence (XRF) is the most employed technique to characterize Cultural Heritage artifacts. The increasing use of this technique in this research field is due to technological developments that occurred during the last decade, which enabled the construction of easy to handle, XRF portable systems that allow fast, non-destructive and in situ analyses. One of the most common applications of XRF is the characterization of inorganic pigments in works of art, polychrome sculptures, etc. The information obtained in this type of analysis is essential for a better knowledge of the history of the work of art and for restorers and conservators who can choose better intervention methods. In this paper, a European black Japanned furniture dated between the eighteenth and the nineteenth centuries was analyzed by XRF. The analyses were carried out in situ using a portable XRF system, Tracer IV model from Bruker, which has a Rh anode. The analyses allowed concluding that the pigments in the polychrome are: lamp black, vermilion, brown ochre, Prussian blue and green earth. In addition to the polychrome in high relief, the furniture has golden regions where gold was identified mixed with lead-based historical pigments. The results obtained, besides helping to confirm the authenticity of the artifact, were also useful for restorers to choose suitable methods to intervene the work of art, which has recently undergone restoration. (author)

problems in spinning in kolfe house-hold utencil factory abstract ...

African Journals Online (AJOL)

Kolfe House-Hold Utensil Factory in Addis Ababa, is producing different types of utensils for house-hold use from commercial aluminium. Deep drawing or/and spinning are the methods used for shaping this metal to desired shape and size, though some small parts are cast too. One of their products is kettle, which is.

Incense and Joss Stick Making in Small Household Factories, Thailand

Directory of Open Access Journals (Sweden)

S Siripanich

2014-07-01

Full Text Available Background: Incense and joss stick are generally used in the world. Most products were made in small household factories. There are many environmental and occupational hazards in these factories. Objective: To evaluate the workplace environmental and occupational hazards in small household incense and joss stick factories in Roi-Et, Thailand. Methods: Nine small household factories in rural areas of Roi-Et, Thailand, were studied. Dust concentration and small aerosol particles were counted through real time exposure monitoring. The inductively coupled plasma optical emission spectrometry (ICP-OES was used for quantitative measurement of heavy metal residue in incense products. Results: Several heavy metals were found in dissolved dye and joss sticks. Those included barium, manganese, and lead. Rolling and shaking processes produced the highest concentration of dust and aerosols. Only 3.9 % of female workers used personal protection equipment. Conclusion: Dust and chemicals were major threats in small household incense and joss stick factories in Thailand. Increasing awareness towards using personal protection equipment and emphasis on elimination of environmental workplace hazards should be considered to help the workers of this industry.

THE STRATEGIC RELEVANCE OF TECHNOLOGY-RELATED VARIABLES TO THE COMPETITIVENESS OF SMALL - TO MEDIUM-SIZED FURNITURE MANUFACTURERS

Directory of Open Access Journals (Sweden)

Lourens, A. S.

2012-11-01

Full Text Available SMMEs can make a critical and positive economic contribution to South Africa, and small- to medium-sized furniture manufacturers (SM/FMs have the potential to contribute to economic growth, job creation, and GDP. However, the furniture industry has not stayed abreast of technological advances. To survive in an environment of increasing competition and imports, competitive strategies must be devised. One such strategy is for technology adoption and implementation that can provide solutions for the furniture industry to improve speed, quality, variety, flexibility, and productivity, resulting in improved competitiveness. However, the adoption of technology means that its acquisition and application must be managed strategically, as the use of technology involves far more than simply taking it into account during the business-plan

Utilization trend of wood species utilized in furniture industry in ...

African Journals Online (AJOL)

The utilization trend of four commonly used wood species and two lesser used wood species that are used for furniture making was examined. The wood species are Mansonia altissima (Mansonia), Khaya ivorensis (Khaya), Cordia millenii (Cordia) and Tectona grandis (Teak) as commonly used wood species; Aningeria ...

Gathering structured reflection in the furniture business by Trend Mapping

DEFF Research Database (Denmark)

Frei, Andrea Erika; Eriksen, Kaare Riise

2015-01-01

Setting up the direction for new product designs in the furniture business can be more or less structured and in many situations the idea for new design concepts, constructions, details, coloring or choice of material are directed by random input from retailers or external designers or from...

Prioritization of Wood Species Utilized for Furniture Making in ...

African Journals Online (AJOL)

The preference for wood species varied among the three cities and among the three scales of furniture factories. However, Mansonia altissima was most preferred in the three cities with rates of 99.0%, 97.4% and 97.7% in Lagos, Ibadan and Benin respectively. 39 wood species were compiled from the lists of the three cities ...

Carel Breytspraak Sr., Purveyor to his Majesty King Louis Napoleon. Breytspraak furniture from the collection of the Royal Palace in Amsterdam

Directory of Open Access Journals (Sweden)

Paul van Duin

2013-06-01

Full Text Available In 1808, King Louis Napoleon had the town hall of Amsterdam converted to Royal Palace. Besides making the necessary architectural alterations, he ordered hundreds of pieces of furniture and other ornamental objects from local furniture makers, upholsterers, decorators and other suppliers. This collection of Empire furniture, which is still preserved in the palace, is today the largest of its kind outside France. Between 2005 and 2009, these pieces of furniture were restored as part of the wider restoration of the entire palace, a gigantic operation that involved hundreds of restoration experts. A furniture committee made sure that quality and looks remained uniform. During the process the restoration experts and researchers made a full study of the furniture, documenting finds and findings, supplemented with research into the origins, the makers, use, techniques and material. This is unique for the Netherlands. The data, recorded in documentation and restoration reports, offer fresh insights in especially the construction and manufacturing process of Dutch Empire furniture. The discoveries are illustrated by a number of purveyances by Carel Breytspraak Sr. (1769-1810, the best paid furniture maker of the king. The 100 chairs he made for the Grand dining room of the palace are an example of pre-modern serial production. This may be inferred from the varying quality of the wood that was used and from the varying thickness of the seat stretchers, among other things. Furthermore, it turned out that the chairs still had the original stuffing, which was reused after having been restored. One chair still had the original upholstery from the days of Louis Napoleon and this was used as the basis for the current upholstery. The chairs are typical examples of furniture made after French decoration prints, which were undoubtedly provided by the king’s architects. The roll-top desk that Breytspraak made for the king’s bedroom is one of the most unique

Effectiveness of low cost adapted school furniture on the functional performance of a child with cerebral palsy

Directory of Open Access Journals (Sweden)

Marco Aurélio Teixeira Piovezanni

2014-06-01

Full Text Available Individuals with cerebral palsy present an atypical motor function, characteristic altered postures in movement coordination and muscle tone. This causes limitations in their ability to perform functional activities. In this context, the introduction of assistive technology is vital to the objective of augmenting their ability to function productively and be included in society. It is common for individuals with cerebral palsy to have difficulty maintaining body dynamics, especially with seated posture. The objective of this study is to produce an adapted school desk and adapted school chair with low cost materials and to study their efficacy in adjusting the writing motor skills of a child with cerebral palsy. This stydi’s case is a boy who has been diagnosed with diplegic cerebral palsy. The collection and registration of data was done in three stages, with the child positioned in adapted furniture, regular school furniture and again in the furniture adapted to establish a comparison. Data analysis was through nonparametrical statistical tests. There was no statistical significance and was verified inconsistency in the data presented, because cannot be said for sure wich furniture was more effective in carrying while performing a proposed task and even if there was learning motor with its repetition. This fact does not invalidate the adequacy of school furniture to the student with cerebral palsy, because is an important factor facilitate control and postural stability to the individual, which interferes with fine motor skills of these individuals, influencing their performance in school activities.

College and Community in Partnership: The Furniture College at Letterfrack.

Science.gov (United States)

Rosenfeld, Stuart A.

2001-01-01

A community economic development organization in rural Ireland partnered with a technical college to build a college to teach furniture design and manufacturing, with an emphasis on entrepreneurship and new production technologies. The college has been successful in attracting good students and helping them find employment. A research and…

Business Challenges and Design: Theory and Practice in the Furniture Industry in the Republic of Croatia

OpenAIRE

Radović, Romina

2013-01-01

Background: A systematic and continuous product policy management is important for a company's competitiveness and the question is to what extent and in what way companies engaged in the furniture manufacturing sector actually apply them. Objectives: The objective of this paper is to explore to what extent the design profession is involved in the product policy and teams which define market properties of products in the furniture industry. Methods: In order to achieve the objectives of this p...

Spatial Determinants on Export marketing activity in Marshallian Districts: An investigation of the Danish Furniture Industry

DEFF Research Database (Denmark)

Andersen, Poul Houman

2002-01-01

The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?......The purpose of the contribution is investigate the role of localised districts on the organisation of export activities in small and medium-sized furniture producers. To what extent do local environments influence the export activities taken on by firms?...

A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

Directory of Open Access Journals (Sweden)

Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

2012-06-01

Full Text Available Wooden furniture industry is an important industry sector in Indonesia, because many people’s welfare relyon this industry sector and the industry has a big social and environmental impacts. Many wooden furnitureindustries in Indonesia, especially in Central Java Province face problems related to the sustainability. The relationbetween wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

Achievements of the ITB's--Furniture and Timber Industry Training Board

Science.gov (United States)

Industrial Training International, 1974

1974-01-01

The Furniture and Industry Training Board set out in 1965 to find a means of successfully implementing management training in small firms. The author describes research efforts undertaken by the Board which led to the development of the training program now in use--management development based on company appraisal. (AJ)

Use of Augmented Reality in the furniture industry

OpenAIRE

Carvalho, Elizabeth, Simão; Maçães, Gustavo; Brito, Paulo; Varajão, Isabel; Sousa, Nuno

2011-01-01

The architects conceive the interior visual aspect of a house based on sketches and drawings. These drawing schemes are perfectly understandable by technicians that are responsible for their implementation, but to the client, most of the time, they seem somewhat unrealistic and ungraspable in terms of visual model. This issue is especially sensitive when the inner components are actually pieces of different kinds of furniture and other decoration stuff. The ideal situatio...

Analysis of successful rate factors for small and medium enterprises in furniture manufacturing sector in Klaten Regency - Central Java, Indonesia

Science.gov (United States)

Budhi Utomo, R.; Lasminiasih; Prajaka, S.

2018-03-01

Small and Medium Enterprises (SMEs) are business activities that can expand the level of employment rate and provide economic services to the wider community and can play a role in the process of equalizing and improving people’s income, stimulating economic growth as well as realizing national stabilities. The aim of this study is to identify the factors of the success rate for Small and Medium Enterprises (SMEs) in furniture manufacturing sector in Klaten regency, Central Java, Indonesia. The method employed in this study was descriptive qualitative by also employing quantitative analysis of which the data were collected through observations, interviews and by administering questionnaires. The results seemed to indicate that the furniture business in Klaten is still experiencing difficulties in managing its various aspects of business, namely in terms of marketing (either directly or indirectly or by making the best use media of technology) and managing capital. All this time, the SMEs in furniture manufacturing sector in Klaten have been utilizing a very simple system in producing tables, chairs, wardrobes and any other furniture products which are then distributed to be sold by larger furniture companies. This condition makes the SMEs unable to be independent in running their business.

Metals recovery of spent household batteries using a hydrometallurgical process; Recuperacao de metais de sucatas de pilhas e baterias pos-consumo utilizando processamento hidrometalurgico

Energy Technology Data Exchange (ETDEWEB)

Souza, K.P.; Tenorio, J.A.S., E-mail: kprovazi@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Engenharia Metalurgica e de Materiais

2010-07-01

The objective of the work is to study a method for metals recovery from a sample composed by a mixture of the main types of spent household batteries. Segregation of the main metals is investigated using a treatment route consisting of the following steps: manual identified and dismantling, grinding, electric furnace reduction, acid leaching and selective precipitation with sodium hydroxide with and without hydrogen peroxide. Before and after precipitations the solutions had been analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP/OES) and the precipitated analyzed by Scanning Electron Microscopy (SEM) with Spectrometry of Energy Dispersion Spectroscopy (EDS). The results had indicated that the great majority of metals had been precipitated in pHs studied, also had co-precipitation or simultaneous precipitation of metals in some pHs. (author)

On the necessity of improving the environmental impacts of furniture and appliances in net-zero energy buildings.

Science.gov (United States)

Hoxha, Endrit; Jusselme, Thomas

2017-10-15

There is now clear evidence regarding the extensive use of furniture and appliances in daily human life, but there is less evidence of their impact on the environment. Responding to this gap in knowledge, this study focuses on an assessment of the environmental impacts of furniture and appliances as used in highly energy efficient buildings. Their primary energy, non-renewable energy and global warming potential indicators have been assessed by extending the boundaries of the Life Cycle Assessment (LCA) study beyond the building itself. In conclusion, we found that furniture and appliances were responsible for around 30% of greenhouse gas emissions and non-renewable energy consumption and 15% of primary energy consumption comparing to the overall impacts of the building. Since embodied impacts represent the largest values, the process for labelling the appliances' energy efficiency should encompass a life-cycle point of view, not just a usage point of view as the case currently. Among office appliances, computer equipment was ranked as the highest impacting element, especially laptops and monitors. As for domestic appliances, refrigerators and electric ovens had the biggest impacts. Concerning furniture, the greatest impacts were from office and kitchen cabinets. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

Science.gov (United States)

Bleda, Andrés L.; Jara, Antonio J.; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F.

2012-01-01

The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain. PMID:22778653

Evaluation of the impact of furniture on communications performance for ubiquitous deployment of Wireless Sensor Networks in smart homes.

Science.gov (United States)

Bleda, Andrés L; Jara, Antonio J; Maestre, Rafael; Santa, Guadalupe; Gómez Skarmeta, Antonio F

2012-01-01

The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT) and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

Evaluation of the Impact of Furniture on Communications Performance for Ubiquitous Deployment of Wireless Sensor Networks in Smart Homes

Directory of Open Access Journals (Sweden)

Antonio F. Gómez Skarmeta

2012-05-01

Full Text Available The extensions of the environment with the integration of sensing systems in any space, in conjunction with ubiquitous computing are enabling the so-called Smart Space Sensor Networks. This new generation of networks are offering full connectivity with any object, through the Internet of Things (IoT and/or the Web, i.e., the Web of Things. These connectivity capabilities are making it feasible to sense the behaviours of people at home and act accordingly. These sensing systems must be integrated within typical elements found at home such as furniture. For that reason, this work considers furniture as an interesting element for the transparent location of sensors. Furniture is a ubiquitous object, i.e., it can be found everywhere at home or the office, and it can integrate and hide the sensors of a network. This work addresses the lack of an exhaustive study of the effect of furniture on signal losses. In addition an easy-to-use tool for estimating the robustness of the communication channel among the sensor nodes and gateways is proposed. Specifically, the losses in a sensor network signal due to the materials found within the communication link are evaluated. Then, this work proposes a software tool that gathers the obtained results and is capable of evaluating the impact of a given set of materials on the communications. This tool also provides a mechanism to optimize the sensor network deployments during the definition of smart spaces. Specifically, it provides information such as: maximum distances between sensor nodes, most suitable type of furniture to integrate sensors, or battery life of sensor nodes. This tool has been validated empirically in the lab, and it is currently being used by several enterprise partners of the Technological Centre of Furniture and Wood in the southeast of Spain.

Household batteries: Evaluation of collection methods

Energy Technology Data Exchange (ETDEWEB)

Seeberger, D.A.

1992-12-31

While it is difficult to prove that a specific material is causing contamination in a landfill, tests have been conducted at waste-to-energy facilities that indicate that household batteries contribute significant amounts of heavy metals to both air emissions and ash residue. Hennepin County, MN, used a dual approach for developing and implementing a special household battery collection. Alternative collection methods were examined; test collections were conducted. The second phase examined operating and disposal policy issues. This report describes the results of the grant project, moving from a broad examination of the construction and content of batteries, to a description of the pilot collection programs, and ending with a discussion of variables affecting the cost and operation of a comprehensive battery collection program. Three out-of-state companies (PA, NY) were found that accept spent batteries; difficulties in reclaiming household batteries are discussed.

Household batteries: Evaluation of collection methods

Energy Technology Data Exchange (ETDEWEB)

Seeberger, D.A.

1992-01-01

While it is difficult to prove that a specific material is causing contamination in a landfill, tests have been conducted at waste-to-energy facilities that indicate that household batteries contribute significant amounts of heavy metals to both air emissions and ash residue. Hennepin County, MN, used a dual approach for developing and implementing a special household battery collection. Alternative collection methods were examined; test collections were conducted. The second phase examined operating and disposal policy issues. This report describes the results of the grant project, moving from a broad examination of the construction and content of batteries, to a description of the pilot collection programs, and ending with a discussion of variables affecting the cost and operation of a comprehensive battery collection program. Three out-of-state companies (PA, NY) were found that accept spent batteries; difficulties in reclaiming household batteries are discussed.

Analysis of school furniture used in computer classrooms

OpenAIRE

Jiří Tauber

2011-01-01

With the respect to the fast development of new computer technologies, it is unconditionally necessary that school furniture reflected this trend and adapted to it. Our use of computer technologies and utilities in teaching is increasing. Therefore, it is necessary to improve school desks so that they would be fit for new computer technology. Creation of a compact set of information relative to the issue concerned, which would comprise of needs and requirements for individual pieces of furnit...

Physical and chemical evaluation of furniture waste briquettes

OpenAIRE

Moreno Caballero, Ana Isabel; Font, Rafael; Conesa, Juan A.

2016-01-01

Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified m...

[The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

Science.gov (United States)

Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

2016-10-20

Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

40 CFR 63.4890 - What emission limits must I meet?

Science.gov (United States)

2010-07-01

... organic HAP-free coating technology can be used on the metal furniture components. The request must be... Standards for Hazardous Air Pollutants: Surface Coating of Metal Furniture Emission Limitations § 63.4890... emission limit for specific metal furniture components or type of components for which you believe the...

Comparative Analysis of Household Waste Composition in the Different Districts of Stockholm

OpenAIRE

Miafodzyeva, Sviatlana; Brandt, Nils

2011-01-01

Separating household waste into fractions at the place where it was generated is one of the most popular methods of collection household waste in most European countries. In 1994 a producer responsibility ordinance for packaging was introduced in Sweden. This ordinance mandates householders to sort out packaging waste, clean the waste and sort different package materials – paper, plastic, glass and metal in assigned recycling bins. Household’s participation is mandatory but in practice it is ...

Marketing low-grade hardwoods for furniture stock - a new approach

Science.gov (United States)

Hugh W. Reynolds; Charles J. Gatchell

1979-01-01

A hardwood shortage of high-grade lumber exists while there is a surplus of low-grade hardwood timber. Two things are needed for the surplus to correct the shortage: a new manufacturing system and a new marketing technique. Utilization research at the Princeton Forestry Sciences Laboratory has developed the new system for converting low-grade hardwood for furniture use...

Survey the environmental effects of the household batteries on decreasing of compost quality

International Nuclear Information System (INIS)

Davari, A.; Sharifan, Hamid Reza

2008-01-01

The household batteries consisted the heavy metals are one of the important pollutant for Environment. whereas Iran has no environmental policy for them and without environmental planning they input to urban waste solid so this study has surveyed effect of the household batteries in urban waste solid to decreasing of compost quality that produced in Karaj composting. For this research has sampled of compost production then analyzed for assess the heavy metal. In the laboratory the samples were grind then hair sieve to convert them to similar pieces. For the measuring metal concentration first they should be extract and finally measure by adsorption atomic spectroscope. The result show high concentration of heavy metal such as Ni, Cd, Zn, Hg, etc. that there were in produced compost. So major cause of law quality of this compost refer to concentration of heavy metals. Findings were in contrary to standard concentration for agriculture soil. It's obvious the heavy metals concentration depend to quantity of consumption the kinds of batteries

IKEA heats and cools with urban wase water. First energy saving furniture centre in Berlin-Lichtenberg; IKEA heizt und kuehlt mit staedtischem Abwasser. Erstes Energiespar-Einrichtungshaus in Berlin-Lichtenberg

Energy Technology Data Exchange (ETDEWEB)

Genath, Bernd

2010-11-15

In May 2010, the district major of Berlin-Lichtenberg (Federal Republic of Germany), Christina Emmrich, and the future boss of the Swedish furniture furniture IKEA, Jutta Iskalla, symbolically laid the foundation for the meanwhile 46th IKEA furniture store in Germany with a unique building engineering: The urban waste water heats and cools the office rooms and salesrooms via heat pump. The furniture centre is to be opened in December 2010.

STRUCTURAL EFFECTS AND MUTATIONS CAUSED BY THE ECONOMIC CRISIS ON FURNITURE TRADE AT THE EUROPEAN UNION LEVEL

OpenAIRE

Radu Marginean

2013-01-01

The global economic crisis had most negative effects on the entire economic sphere and especially in what the consuming industry is concerned, which may be considered “luxurious”, the way in which we may talk about the furniture industry. Along times of economic crisis at social level, a decrease in financial power at microeconomic, individual level is felt. Under conditions of social decrease in buying capacity, the request for commercial furniture is in rapid fall and thus the industry as s...

Emission of Metals from Pelletized and Uncompressed Biomass Fuels Combustion in Rural Household Stoves in China

Science.gov (United States)

Zhang, Wei; Tong, Yindong; Wang, Huanhuan; Chen, Long; Ou, Langbo; Wang, Xuejun; Liu, Guohua; Zhu, Yan

2014-07-01

Effort of reducing CO2 emissions in developing countries may require an increasing utilization of biomass fuels. Biomass pellets seem well-suited for residential biomass markets. However, there is limited quantitative information on pollutant emissions from biomass pellets burning, especially those measured in real applications. In this study, biomass pellets and raw biomass fuels were burned in a pellet burner and a conventional stove respectively, in rural households, and metal emissions were determined. Results showed that the emission factors (EFs) ranged 3.20-5.57 (Pb), 5.20-7.58 (Cu), 0.11-0.23 (Cd), 12.67-39.00 (As), 0.59-1.31 mg/kg (Ni) for pellets, and 0.73-1.34 (Pb), 0.92-4.48 (Cu), 0.08-0.14 (Cd), 7.29-13.22 (As), 0.28-0.62 (Ni) mg/kg for raw biomass. For unit energy delivered to cooking vessels, the EFs ranged 0.42-0.77 (Pb), 0.79-1.16 (Cu), 0.01-0.03 (Cd), 1.93-5.09 (As), 0.08-0.19 mg/MJ (Ni) for pellets, and 0.30-0.56 (Pb), 0.41-1.86 (Cu), 0.04-0.06 (Cd), 3.25-5.49 (As), 0.12-0.26 (Ni) mg/MJ for raw biomass. This study found that moisture, volatile matter and modified combustion efficiency were the important factors affecting metal emissions. Comparisons of the mass-based and task-based EFs found that biomass pellets produced higher metal emissions than the same amount of raw biomass. However, metal emissions from pellets were not higher in terms of unit energy delivered.

Evaluation of service conditions of the machines within the furniture joinery

OpenAIRE

Łukasz Zalejski; Noga Mariusz; Wojtysiak Marcin; Foszmanowicz Krzysztof

2015-01-01

The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM) rate, evaluation of the level of materialized technology using Parker's scale.

Macroergonomic analysis of an assembly sector of a furniture company.

Science.gov (United States)

Cristiane, A A Z; Danielle, M D; Vanessa, C B

2012-01-01

From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

A SUSTAINABLE SUPPLY CHAIN MODEL OF RELATIONSHIP BETWEEN WOOD SUPPLIER AND FURNITURE INDUSTRY IN INDONESIA

Directory of Open Access Journals (Sweden)

Muh. Hisjam Adi Djoko Guritno and Shalihuddin Djalal Tandjung

2012-06-01

between wood suppliers and furniture industry is studied in this paper. A sustainable supply chain management (s-SCM model is proposed as an approach for solutions for the problems. The approach is chosen due to the characteristics of the problems that related to economic, social, and environmental problems. This aim of this paper is to determine how much supply teak wood must be provided by PP to satisfy furniture industry demand, how much production capacity that must be increased and how large forest area that must be planted in order to achieve environmental and social goals without sacrificing economical goals much. Goal programming (GP is chosen for solving the problems, because the goals are to maximize the total benefit,minimize the total loss and anticipate the conflicts between goals. Numerical trial based on observation in teak wooden furniture industry in Central Java was used to illustrate our findings. Using pareto efficient principle, the model can satisfy all goals that need to be achieved. Numerical results can be used by decision makers in teak wood industry to analyze the trade-off among several set of alternative solutions.

PERFORMANCE ANALYSIS ON FREIGHT TRANSPORTATION IN FURNITURE INDUSTRY, A CASE STUDY IN BANTUL, YOGYAKARTA, INDONESIA

Directory of Open Access Journals (Sweden)

C. H. Soekamto

2012-06-01

Full Text Available The Supply Chain Management is a new philosophy encouraging internal and external integration which encompass all the aspects, from the supplier until down to the customers. Transportation plays a major role in achieving efficiency and effectiveness because the role of transportation in the Supply Chain is as the intermediary help to distribute the physical goods from one entity to another entity.  For this reason, the objective of this research is to analyse and measure the effectiveness and efficiency of inbound and outbound logistics in the furniture industry in Bantul, Yogyakarta. Firstly, the author will try to draw the supply chain mapping in order to gain more understanding about the entities in the supply chain.  Secondly, performance of the transportation modes that will be used to move the furniture will be assessed through questionnaire. Thirdly, the author will try to analyse the response if rail transportation is proposed as an alternative transportation mode to move the goods. Lastly, conclusion and recommendation regarding the issue will be derived as implied in the result from data analysis. Keywords: Supply chain management, transportation, performance, furniture industry.

EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

OpenAIRE

GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

2014-01-01

In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

Household hazardous waste in municipal landfills: contaminants in leachate

International Nuclear Information System (INIS)

Slack, R.J.; Gronow, J.R.; Voulvoulis, N.

2005-01-01

Household hazardous waste (HHW) includes waste from a number of household products such as paint, garden pesticides, pharmaceuticals, photographic chemicals, certain detergents, personal care products, fluorescent tubes, waste oil, heavy metal-containing batteries, wood treated with dangerous substances, waste electronic and electrical equipment and discarded CFC-containing equipment. Data on the amounts of HHW discarded are very limited and are hampered by insufficient definitions of what constitutes HHW. Consequently, the risks associated with the disposal of HHW to landfill have not been fully elucidated. This work has focused on the assessment of data concerning the presence of hazardous chemicals in leachates as evidence of the disposal of HHW in municipal landfills. Evidence is sought from a number of sources on the occurrence in landfill leachates of hazardous components (heavy metals and xenobiotic organic compounds [XOC]) from household products and the possible disposal-to-emissions pathways occurring within landfills. This review demonstrates that a broad range of xenobiotic compounds occurring in leachate can be linked to HHW but further work is required to assess whether such compounds pose a risk to the environment and human health as a result of leakage/seepage or through treatment and discharge

Prediction of fire growth on furniture using CFD

Science.gov (United States)

Pehrson, Richard David

A fire growth calculation method has been developed that couples a computational fluid dynamics (CFD) model with bench scale cone calorimeter test data for predicting the rate of flame spread on compartment contents such as furniture. The commercial CFD code TASCflow has been applied to solve time averaged conservation equations using an algebraic multigrid solver with mass weighted skewed upstream differencing for advection. Closure models include k-e for turbulence, eddy breakup for combustion following a single step irreversible reaction with Arrhenius rate constant, finite difference radiation transfer, and conjugate heat transfer. Radiation properties are determined from concentrations of soot, CO2 and H2O using the narrow band model of Grosshandler and exponential wide band curve fit model of Modak. The growth in pyrolyzing area is predicted by treating flame spread as a series of piloted ignitions based on coupled gas-fluid boundary conditions. The mass loss rate from a given surface element follows the bench scale test data for input to the combustion prediction. The fire growth model has been tested against foam-fabric mattresses and chairs burned in the furniture calorimeter. In general, agreement between model and experiment for peak heat release rate (HRR), time to peak HRR, and total energy lost is within +/-20%. Used as a proxy for the flame spread velocity, the slope of the HRR curve predicted by model agreed with experiment within +/-20% for all but one case.

Produce yellow-poplar furniture dimension at minimum cost by using YELLOPOP

Science.gov (United States)

David G. Marten; David G. Marten

1986-01-01

Describes a computer program called YELLOPOP that determines the least-cost combination of lumber grades required to produce a given cutting order of furniture dimension parts. If the least-cost mix is not available, YELLOPOP can be used to determine the next best alternative. The steps involved in using the program are also described.

Evaluation of service conditions of the machines within the furniture joinery

Directory of Open Access Journals (Sweden)

Łukasz Zalejski

2015-12-01

Full Text Available The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, characteristics of the Total Productive Maintenance (TPM rate, evaluation of the level of materialized technology using Parker's scale.

Removal or transport of office furniture and PCs

CERN Multimedia

TS Department

2008-01-01

The TS/FM Group wishes to remind users that requests for the removal or transport of office furniture must be made using the EDH ‘Transport request’ form. Please select the "Removals" category from the drop-down menu to indicate the nature of the request. Requests for the transport of PCs from your office to Bldg. 513 or back must also be made using the EDH ‘Transport request’ form. In this case select the "PC transport" category from the drop-down menu. TS/FM Group Tel. 160239

Household Income Composition and Household Goods

OpenAIRE

Voynov, Ivan

2005-01-01

The paper focuses on the change in household income composition and the factors that determine it. The results bring additional knowledge about household poverty dynamics. Based on the collective approach to the family and the cooperative game theory it is constructed theoretical model of household income composition change. The change in income composition is a result from bargaining between household members in attempt to defend the most suitable for them income source. Decisive influence i...

Bellus Furniture lõi edetabelis platsi puhtaks võimsa kasvuga / Aarne Mäe

Index Scriptorium Estoniae

Mäe, Aarne, 1967-

2006-01-01

Äripäeva koostatud Lääne-Viru ettevõtjate TOP-is troonis esikohal Haljalas tegutsev pehmemööbli firma Bellus Furniture, järgnesid Vest-Woodi puidutööstus Rakveres ja Kunda tsemenditehas. Lisa: Pingerida

Pleural mesothelioma: Case-report of uncommon occupational asbestos exposure in a small furniture industry.

Science.gov (United States)

Oddone, Enrico; Imbriani, Marcello

2016-01-01

The relationship between asbestos exposure and malignant mesothelioma is no longer disputed, although it is not always easy to trace past occupational exposure. This report describes a case of uncommon asbestos exposure of a small furniture industry worker, who subsequently died of pleural malignant mesothelioma, to stress the crucial importance of a full reconstruction of the occupational history, both for legal and compensation purposes. Sarcomatoid pleural mesothelioma was diagnosed in a 70-year-old man, who was previously employed as a carpenter in a small furniture industry. He worked for about 6 years in the small factory, was exposed to asbestos during the assembly of the furniture inspired by classical architecture, in which asbestos cement tubes were used to reproduce classical columns. During this production process no specific work safety measures were applied, nor masks or local aspirators. No extra-professional exposure to asbestos was identified. This mesothelioma case was investigated by the Public Prosecutor's assignment that commissioned expert evidence on the legal accountability for the disease. Despite its uncommon expositive circumstance, the length of latency (about 30 years), the duration of exposure, the clinical and histochemical features are all consistent with literature evidence, accounting for the occupational origin of this malignancy. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Sales Application Online of Design Furniture on Mitra Karya Furniture

Directory of Open Access Journals (Sweden)

Maimunah

2016-02-01

Full Text Available The development of the business world characterized by the increasing number of established companies, both of which are engaged in industry, trade and services. The role of computers use in a company or organization is not a layman anymore but is a must. With the computerized system in the company or organization, all the processes ranging from data processing to making reports and another important documents can be neatly arranged so that can facilitate the process of data storage and retrieval. The sales processing system are running still manually. They are still using flyers to find consumers so that ineffective and inefficient. The sales program is the design research proposed of information systems. By utilizing the technology of computer and internet in order word is to try making the facility of sales better. By creating an online sales system to make the working process does not spread the time so that the sale can run well and be good service. The designs created by using Dreamweaver CS5 and using the MySQL for database so the database stored neatly. The main function of the online sales system is to assist in facilitating the resources to get the latest product sales at MitraKarsa Furniture, so that the customer can buy the latest products easily, anytime and anywhere they want to.

DEVELOPMENT OF ENTERPRISE RESOURCE PLANNING APPLICATIONS TO HELP RESOURCES MANAGEMENT OF FURNITURE COMPANY USING TECHNOLOGY WINDOWS COMMUNICATION FOUNDATION

Directory of Open Access Journals (Sweden)

Didiek S Wiyono

2013-09-01

Full Text Available Furniture companies need the latest information of its resources to maintain efficiency and productivity. ERP can be used as a tool to manage the existing resources on furniture company and can quickly display the suitable information. The study was conducted to design a simple ERP application that can help resource management on the furniture company. ERP application built with object-oriented methods. The implementation is using web technology as the user interface, Windows Communication Foundation (WCF as the application interface with other systems, and HTTP / HTTPS as the transport protocol to access the application. The results of study is a simple ERP application which consist of order management, production, inventory, purchasing, and reporting. ERP applications can be accessible to users through the web. For the purposes of integration, has built 72 services of WCF that can be accessed by other applications even though using different platforms. Keywords: erp, web, windows communication foundation, integration

Waste generation and utilisation in micro-sized furniture-manufacturing enterprises in Turkey.

Science.gov (United States)

Top, Y

2015-01-01

The number of small-scale businesses within most national economies is generally high, especially in developing countries. Often these businesses have a weak economic status and limited environmental awareness. The type and amount of waste produced, and the recycling methods adopted by these businesses during their operation can have negative effects on the environment. This study investigated the types of waste generated and the recycling methods adopted in micro-sized enterprises engaged in the manufacture of furniture. An assessment was also made of whether the characteristics of the enterprise had any effect on the waste recycling methods that were practised. A survey was conducted of 31 enterprises in the furniture industry in Gumushane province, Turkey, which is considered a developing economy. Surveys were undertaken via face-to-face interviews. It was found that medium-density fibreboard (MDF), and to a lesser extent, chipboard, were used in the manufacture of furniture, and two major types of waste in the form of fine dust and small fragments of board are generated during the cutting of these boards. Of the resulting composite board waste, 96.9% was used for heating homes and workplaces, where it was burnt under conditions of incomplete combustion. Enterprises were found to have adopted other methods to utilise their wastes in addition to using them as fuel. Such enterprises include those operating from a basement or first floor of a building in the cities, those continuing production throughout the year, those in need for capital and those enterprises not operating a dust-collection system. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

International Nuclear Information System (INIS)

González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

2011-01-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

2011-12-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

Science.gov (United States)

González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

2011-12-01

The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

Perancangan Modular Furniture untuk Food Truck Penjual Makanan Indonesia

OpenAIRE

Sherly de Yong, Chetlyne Stefany Soekanto I Gusti Ngurah Ardana

2016-01-01

Food and beverage industry growth in Indonesia continues to develop, and need to be traded in location with dense occupants so that the business can be profitable. This has resulted in the emergence of the mobile system, as selling methods are much in demand today. Food vendors are mobile, requiring a furniture design that can support the activity of cooking and selling on a vehicle. By using Kembel design method, through the process of understanding, compressing, processing the data using de...

26 CFR 1.911-4 - Determination of housing cost amount eligible for exclusion or deduction.

Science.gov (United States)

2010-04-01

..., nonrefundable fees paid for securing a leasehold, rental of furniture and accessories, household repairs, and..., improvements, and other costs that are capital expenditures; (ii) The cost of purchased furniture or... the individual's dependents, or as part of a tax equalization plan; the fair market value of...

Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

Science.gov (United States)

Shirk, Gary M.

1984-01-01

Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

Science.gov (United States)

Moodley, Sagren

2002-01-01

Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

Sustainable Competitive Advantage (SCA Analysis of Furniture Manufacturers in Malaysia: Normalized Scaled Critical Factor Index (NSCFI Approach

Directory of Open Access Journals (Sweden)

Tasmin Rosmaini

2016-06-01

Full Text Available The purpose of this paper is to investigate Malaysian furniture industry via Sustainable competitive advantages (SCA approach. In this case study, sense and respond method and Normalized Scaled Critical Factor Index (NSCFI are used to specify the distribution of companies’ resources for different criteria and detect the attributes which are critical based on expectation and experience of companies’ employs. Moreover, this study evaluates Malaysian furniture business strategy according to manufacturing strategy in terms of analyzer, prospector and defender. Finally, SCA risk levels are presented to show how much company’s resource allocations support their business strategy.

Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

Directory of Open Access Journals (Sweden)

Carlos Mario Gutiérrez Aguilar

2017-10-01

Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

Ergo-effects of designed school furniture and sitting positions on students behaviour and Musculo-Skeletal Disorder in Nigerian tertiary institutions

Directory of Open Access Journals (Sweden)

A. I Musa

2011-07-01

Full Text Available Improper design of school furniture is one of the contributing factors to back pain among students as indicated in some studies. In the case of designing school furniture where sitting constitutes a considerable time in the school, seat becomes important for comfort. This study is carried out in three selected institutions in Nigeria to determine level of musculoskeletal disorder in students’ and the furniture that they use. 720 questionnaires with 240 students (120 boys and 120 girls drawn from each participating institutions were administered and 675 responses were received. The results show that the number of students having MSD, accounted for 93.75%. However, the distributions of pain in the body parts in each school were different. The musculoskeletal pain, mostly concentrated on neck, right shoulders right elbow right wrist right hand, upper back and lower back. The result also reveals that most of the students are sitting on chairs with seat that are too high and too deep or too shallow and of tables that are too high. However, it is recommended that further study on effect of designed school furniture and sitting position in larger sample of students’ representative in Nigeria tertiary institutions should be carried out in order to reduce the effect of body pains.

Local government household battery collection programs: Costs and benefits

Energy Technology Data Exchange (ETDEWEB)

Shapek, Raymond A [Department of Public Administration, University of Central Florida, Orlando, FL (United States)

1995-10-01

Nearly three billion dry-cell household batteries are discarded in the municipal waste stream annually. While the mercury content of newer batteries has been reduced, older batteries and the accumulated total of mercury and cadmium, as well as other metals in the newer batteries still constitute a potential health risk. Many communities have initiated collection programs to remove this source of contamination from the municipal waste stream, but most have not. Fourteen states have enacted legislation regulating the disposal of household batteries, while nine states require the collection of rechargeable batteries. This article describes the potential health risks associated with continued disposal and incineration of household dry-cell batteries, reviews a sampling of existing municipal collection programs in US communities, and examines the costs and benefits and program options of collection programs

Wood Dust in Joineries and Furniture Manufacturing : An Exposure Determinant and Intervention Study

NARCIS (Netherlands)

Douwes, Jeroen; Cheung, Kerry; Prezant, Bradley; Sharp, Mark; Corbin, Marine; McLean, Dave; 't Mannetje, Andrea; Schlunssen, Vivi; Sigsgaard, Torben; Kromhout, Hans; LaMontagne, Anthony D; Pearce, Neil; McGlothlin, James D

Objectives: To assess wood dust exposures and determinants in joineries and furniture manufacturing and to evaluate the efficacy of specific interventions on dust emissions under laboratory conditions. Also, in a subsequent follow-up study in a small sample of joinery workshops, we aimed to develop,

Use of lasers in the furniture industry

Science.gov (United States)

Wieloch, Grzegorz; Pohl, Piotr

1995-03-01

One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

Directory of Open Access Journals (Sweden)

Abdullah Cemil Ilçe

2015-05-01

Full Text Available The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL board that could be used in the furniture sector. Eastern beech (Fagus orientalis L. veneer papels (A and hollow polycarbonate boards (B, both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR and polychloroprene (PCR adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB, medium density fiberboards (MDF, and okoume plywoods (PW. According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

The strategic positioning as determining of the future of a furniture industry: education case

Directory of Open Access Journals (Sweden)

Cleber da Costa Webber

2016-12-01

Full Text Available This case presents a turning-point in the history of the company Expolight, a family company that is several years in the market working in the commercial furniture segment. In the state of Rio Grande do Sul, which is one of the leading furniture manufacturers poles of Brazil, being the products of this region recognized for their high quality. The case presents a decision point where the company needs to choose between keeping their market position, or accept the challenge of a new client, taking into consideration the investments and risks involved. The purpose of this Educational Case is to promote discussion and reflection on topics such as entrepreneurship, strategic management, innovation management and marketing, exercising decision-making based on the data presented. It also has element to the debate on globalization, partnerships and organizational culture.

Identifying and prioritizing indicators and effective solutions to optimization the use of wood in construction classical furniture by using AHP (Case study of Qom

Directory of Open Access Journals (Sweden)

Mohammad Ghofrani

2017-02-01

Full Text Available AbstractThe aim of this study was to identify and prioritize the indicators and provide effective solutions to optimize the use of wood in construction classical furniture using the analytic hierarchy process (case study in Qom. For this purpose, studies and results of other researchers and interviews with experts, the factors affecting the optimization of wood consumption were divided into 4 main categories and 23 sub-indicators. The importance of the sub after getting feedback furniture producers were determined by AHP. The results show that the original surface design and human resources are of great importance. In addition, among 23 sub-effective optimization of the use of wood in construction classical furniture, ergonomics, style, skill training and inlaid in classical furniture industry in order to weight the value of 0/247, 0/181, 0/124 and 0/087 are of paramount importance and the method of use of force specialist solutions were a priority.

Knowledge as a Critical Resource in Innovation among Small Furniture Companies in Indonesia: An Exploration

Directory of Open Access Journals (Sweden)

Marina van Geenhuizen

2005-09-01

Full Text Available The furniture industry makes a significant contribution to the Indonesian economy but is exposed to an intensifying competitive environment and to emerging shortages of raw material. These circumstances have prompted small furniture manufacturers in the district of Jepara to undertake several types of innovation. It appears that of all first ranked innovations, product innovation is the largest category. In the overall pattern of innovations, market innovation and logistics innovation are also important, a situation that can be explained by the typical character and current circumstances of the furniture industry in this area. The innovation process concerned mainly relies on traditional knowledge sources, namely in-house learning-by-doing and experimentation, and buyers (customers. However, the manufacturers show willingness to use other knowledge sources in the near future, particularly more formal and globally oriented ones, such as exhibitions, research institutions, and the Internet. What tends to hamper such progress is that the manufacturers’ capability to access these knowledge sources is limited by financial obstacles and to a smaller extent by complexity and language obstacles. The paper concludes with a few policy recommendations and potential directions of future research. One of the policy recommendations aims at a combination of the traditional way of knowledge generation through in-house learning-by-doing and experimentation with knowledge from modern and formal sources.

Associations between flame retardant applications in furniture foam, house dust levels, and residents' serum levels.

Science.gov (United States)

Hammel, Stephanie C; Hoffman, Kate; Lorenzo, Amelia M; Chen, Albert; Phillips, Allison L; Butt, Craig M; Sosa, Julie Ann; Webster, Thomas F; Stapleton, Heather M

2017-10-01

Polyurethane foam (PUF) in upholstered furniture frequently is treated with flame retardant chemicals (FRs) to reduce its flammability and adhere to rigorous flammability standards. For decades, a commercial mixture of polybrominated diphenyl ethers (PBDEs) called PentaBDE was commonly applied to foam to fulfill these regulations; however, concerns over toxicity, bioaccumulation, and persistence led to a global phase-out in the mid-2000s. Although PentaBDE is still detected in older furniture, other FR compounds such as tris(1,3-dichloroisopropyl) phosphate (TDCIPP) and Firemaster® 550 (FM550) have been increasingly used as replacements. While biomonitoring studies suggest exposure is widespread, the primary sources of exposure are not clearly known. Here, we investigated the relationships between specific FR applications in furniture foam and human exposure. Paired samples of furniture foam, house dust and serum samples were collected from a cohort in North Carolina, USA and analyzed for FRs typically used in PUF. In general, the presence of a specific FR in the sofa of a home was associated with an increase in the concentration of that FR in house dust. For example, the presence of PentaBDE in sofas was associated with significantly higher levels of BDE-47, a major component of PentaBDE, in house dust (10 β =6.4, phouse dust when FM550 was identified in the sofa foam (p<0.01). These relationships were modified by dust loading rates in the living room and the ratio of sofa size to room size. Interestingly, levels of TDCIPP and tris(1-chloro-2-isopropyl) phosphate (TCIPP) were also higher in dust with detections in sofa foam; however, these associations were not statistically significant and may suggest there are other prominent sources of these compounds in the home. In addition, the presence of PentaBDE in sofa foam was associated with significantly higher levels of BDE-47 in serum (p<0.01). These results suggest that FR applications in sofas are likely major

The Importance of Methodology Evaluation of School Furniture for Czech Children with Mobility Disability in Relation to Children’s Anthropometry

Directory of Open Access Journals (Sweden)

Martin Zach

2014-01-01

Full Text Available The paper presents results of research conducted under the support of the IGA LDF MENDELU project, id. No. 32/2010 (Anthropometry in Disabled Children in Relation to Furniture and the NIS MPO ČR FR-TI1/050 project (Information System for the Support of Research, Development, Innovation and Furniture Quality. It gives an account of theoretical and methodological foundations, introduces the project’s research objectives. Its major objective is to familiarise professional public with the results of the conducted research the focus of which was to determine requirements for furniture designated for children with mobility restrictions. The defined requirements then constitute the grounds of school furniture assessment methodology. These requirements are divided into three levels that are somehow interconnected. Application of the methodology as a whole is highly wide and can be directed at all educational institutions in the Czech Republic with the pupils from the target group. The evaluation outcome is a report of each evaluated product. The questions raised also belong to a broader context of the issue at hand, related to the project of protection and safety standards establishment in relation to health status of children and youth, in the context of the “Long-term programme of the improvement of health status of the Czech Republic population – Health for everybody in the 21st century” paper, objective 4: HEALTH OF YOUTH – TO BUILD CONDITIONS FOR YOUNG PEOPLE TO BECOME HEALTHIER AND APTER TO FULFILL THEIR ROLE IN THE SOCIETY BY 2020. It is recommended to make a proper definition of the dimensional characteristics of children and update their measurements for furniture design in the Czech Republic constantly (including revision of technical regulations and innovation dimensions in the literature. This can be considered as an opportunity to improve the health of future generations.

The study of postural workload in assembly of furniture upholstery

OpenAIRE

Marek Lasota Andrzej; Hankiewicz Krzysztof

2017-01-01

The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs) which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS) with sampling. The results indicated that posture code ...

Reconstruction of Furniture Production as Potential and Reputable Intellectual Property Rights (IPR Creative Design Model

Directory of Open Access Journals (Sweden)

husen hendriyana

2017-10-01

Full Text Available Along with recent rapid development of science, technology, art and culture, through research institutions from the central to the local level, the government seriously activates enhancement and protection of the intellectual products of the nation. Such as protection of intellectual property rights against irresponsible plagiarism. This is due to that the appearance, process, or invention steps of the creative furniture designer in the society or in the academic environment have the potential and the opportunity to be registered as Intellectual Properties (IP or gain Intellectual Property Rights (IPR. Besides aiming to lift up the state or institutions achievement and attainment of intellectual property rights internationally, the added value also can be developed in the direction of economic upgrade. Research on furniture products designs have been numerously carried out with various objects and cases, yet the diversity of the subject character and creative processes still have not well defined so they enrich the model of creative process design. This study aims to identify, classify and formulate a potential furniture design model of creative process and IPR standard, through methods PAR. The results of this study are (1 prototype of furniture design products, (2 the creative process model and the construction methods process of furniture design with a concept or a specific theme; (3 Registration of IPR; (4 Scientific manuscript. Seiring dengan perkembangan ilmu pengetahuan, teknologi, seni dan budaya yang marak dewasa ini, melalui lembaga penelitian dari tingkat pusat sampai ketingkat daerah, pemerintah semakin serius menggalangkan peningkatan dan perlindungan terhadap produk intelektual anak bangsa. Salah satu contoh di antaranya adalah perlindungan terhadap hak kekayaan intelektual dari perilaku plagiarism yang tidak bertanggung jawab. Hal ini tiada lain bahwa, bentuk, proses, maupun invention steps dari para pelaku kreatif desain mebel

APPLICATION OF NEAR INFRARED SPECTROSCOPY AND EXPLORATORY DATA ANALYSIS FOR THE IDENTIFICATION OF WOODS IN THE FURNITURE INDUSTRY

Directory of Open Access Journals (Sweden)

Lucas Ferreira Bastos

2012-07-01

Full Text Available The paper aimed to investigate the application of infrared spectroscopy and exploratory data analysis to distinguish the different types of natural woods, contributing to the control of the origin of the materials used in the furniture industry. The near infrared spectroscopy (NIR was used for the characterization of 44 samples of 19 different types of wood, and the principal component analysis (PCA to discriminate. The proposed methodology was efficient in the separation of some samples, but further studies should be performed for the diffusion of this methodology in the routine of the furniture industry.

The ABCs of Cost Allocation in the Wood Products Industry: Applications in the Furniture Industry

OpenAIRE

Quesada-Pineda, Henry J.

2010-01-01

Discusses the basics of cost accounting and explains the strengths and weaknesses of two cost accounting techniques - the direct method and the activity-based costing method - using simple examples and applications to the furniture industry.

An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

Directory of Open Access Journals (Sweden)

Lourens, A.S.

2013-05-01

Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed.

Science.gov (United States)

Heo, Hyeon Su; Park, Hyun Ju; Park, Young-Kwon; Ryu, Changkook; Suh, Dong Jin; Suh, Young-Woong; Yim, Jin-Heong; Kim, Seung-Soo

2010-01-01

The amount of waste furniture generated in Korea was over 2.4 million tons in the past 3 years, which can be used for renewable energy or fuel feedstock production. Fast pyrolysis is available for thermo-chemical conversion of the waste wood mostly into bio-oil. In this work, fast pyrolysis of waste furniture sawdust was investigated under various reaction conditions (pyrolysis temperature, particle size, feed rate and flow rate of fluidizing medium) in a fluidized-bed reactor. The optimal pyrolysis temperature for increased yields of bio-oil was 450 degrees C. Excessively smaller or larger feed size negatively affected the production of bio-oil. Higher flow and feeding rates were more effective for the production of bio-oil, but did not greatly affect the bio-oil yields within the tested ranges. The use of product gas as the fluidizing medium had a potential for increased bio-oil yields.

Learner Support Requirements for Online Workplace Training in the South African Furniture Industry

Science.gov (United States)

MacDonald, Iain S.; Bullen, Mark; Kozak, Robert A.

2010-01-01

A qualitative research project was conducted to evaluate the suitability of e-learning as a means of delivering training to workplace learners in the South African furniture manufacturing sector. Twenty learners participated in a three-month pilot e-learning course and were monitored throughout. While the study was designed primarily to…

The Negro in the Furniture Industry. The Racial Policies of American Industry Series.

Science.gov (United States)

Fulmer, William E.

This is the twenty-eighth of a series of studies conducted to determine variances in industrial employment practices of Negroes and to develop appropriate hiring policies. This particular study sought to examine current racial employment policies in the furniture industry within the context of the industry's structure and history. Interviews with…

Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

Science.gov (United States)

Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

Current situation of used household batteries in Iran and appropriate management policies.

Science.gov (United States)

Zand, A Daryabeigi; Abduli, M A

2008-11-01

Used household batteries are considered as hazardous wastes in many countries due to the potential environmental and human health risks associated with the heavy metals present in batteries. This article presents the current situation of waste household batteries and policies in Iran. Iran with more than 70 million people is a developing country where latest technologies like cell phones and laptops are in widespread use and battery consumption increases accordingly. The household battery demand in Iran has rapidly grown since 2001 and it is expected to increase more quickly in next years, due to increasing technological development. Based on the available data, more than 9800 metric tons of household batteries were imported into Iran in recent decade, with the market value of about US$ 42.6 million. At present, there is no program available in Iran regarding to collection, separation, recycling or safe disposal of used batteries. Therefore, almost all of the spent household are discarded into municipal solid waste (MSW) and sent to sanitary landfills. Appropriate policies to meet safe disposal of household batteries in Iran is also discussed in this investigation.

77 FR 52311 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

Science.gov (United States)

2012-08-29

... Furniture Co., Ltd. Zhangjiagang Zheng Yan Decoration Co., Ltd. Zhangjiang Sunwin Arts & Crafts Co., Ltd.... Trendex Industries Limited Wan Bao Chen Group Hong Kong Co., Ltd. World Design International Co., Ltd...

E3 Success Story - Getting Insight Into Our Organization and Processes at Beachley Furniture Co., Inc.

Science.gov (United States)

Beachley Furniture contacted the U.S. EPA to participate in the Green Suppliers Network (GSN) program which is a collaborative venture among industry, EPA, and the Manufacturing Extension Partnership (MEP) program.

Performance of Color Camera Machine Vision in Automated Furniture Rough Mill Systems

Science.gov (United States)

D. Earl Kline; Agus Widoyoko; Janice K. Wiedenbeck; Philip A. Araman

1998-01-01

The objective of this study was to evaluate the performance of color camera machine vision for lumber processing in a furniture rough mill. The study used 134 red oak boards to compare the performance of automated gang-rip-first rough mill yield based on a prototype color camera lumber inspection system developed at Virginia Tech with both estimated optimum rough mill...

Furniture and Timber Training Board, Fourth Year's Scheme; Training Grants Scheme, 1969-70.

Science.gov (United States)

British Furniture and Timber Training Board, Wembly (England).

This booklet explains what training grants are offered by the Furniture and Timber Training Board of Great Britain, indicates how to claim them, and outlines the Board's training philosophy. Foldouts present conditions which apply in whole or in part to the Training Grants Scheme, followed by guidelines for completing forms. The main section…

Certificação florestal e o mercado moveleiro nacional Forest certification and furniture national market

Directory of Open Access Journals (Sweden)

Ricardo Ribeiro Alves

2009-06-01

Full Text Available O objetivo deste trabalho foi avaliar a inserção da certificação florestal no mercado moveleiro nacional. Para a realização deste estudo, utilizaram-se dados do Conselho de Manejo Florestal (FSC Brasil e dados obtidos por meio de questionários aplicados às empresas moveleiras que possuíam produtos certificados. A certificação mostrou-se presente nas empresas do Estado de São Paulo e da Região Sul, principalmente entre aquelas ligadas à exportação. As empresas da indústria moveleira voltadas para o mercado interno não demonstraram maior interesse na certificação florestal em função da baixa exigência dos clientes.The objective of this work was to evaluate the insertion of forest certification in the national furniture market. The data used for the accomplishment of the present study came from the Forest Stewardship Council (FSC Brazil and the questionnaires applied to the furniture companies with certified products. Companies in the State of São Paulo and in the South Region presented certification, mainly the exporting companies. The furniture companies intended to provide the domestic market did not demonstrate great interest in forest certification because customers did not demand it.

Categorical ERP Repetition Effects for Human and Furniture Items in 7-Month-Old Infants

Science.gov (United States)

Peykarjou, Stefanie; Wissner, Julia; Pauen, Sabina

2017-01-01

Behavioural and recent neural evidence indicates that young infants discriminate broad stimulus categories. However, little is known about the categorical perception of humans represented as full bodies with heads and their discrimination from inanimate objects. This study compares infants' brain processing of human and furniture pictures, probing…

77 FR 21536 - Wooden Bedroom Furniture From the People's Republic of China: Final Rescission of Antidumping...

Science.gov (United States)

2012-04-10

..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as..., wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character...

76 FR 7534 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

Science.gov (United States)

2011-02-10

..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden...

MODELING BILL-OF-MATERIAL WITH TREE DATA STRUCTURE: CASE STUDY IN FURNITURE MANUFACTURER

Directory of Open Access Journals (Sweden)

Toni Prahasto

2012-02-01

Full Text Available This paper presents a modeling of Bill-of-Material with tree data structure. The BOM represents wooden furniture products. The management of BOM is incorporated into an MRP software which is specially built for a furniture manufacturer. The tree data structure is approached with an object oriented programming to provide the creation and modification of the data. The tree object is designed so that a downstream programmer can create an application with high productivity, using the BOM object of course. Legality of the development is ensured by adapting open source resources, i.e. MySQL database engine, PHP server script, and client-side Javascript. The BOM object is used extensively in the MRP software that is being developed. A couple of screenshots are presented to demonstrate the ease of creation and manipulation of Bill-of-Material. The proper approach of modeling BOM with tree structure allows the programmer to reach high productivity during the development of the aforementioned MRP customized software. Keyword : Modeling, Bill of Material, Tree Data Structure

New productive technologies for wood and furniture industry; Nuevas tecnologias productivas para el sector de la madera y del mueble

Energy Technology Data Exchange (ETDEWEB)

Sojo Calvo, F. J.

2012-07-01

During recent years, the wood industry and furniture industry have declined sharply, up to 46,5% of the total employment. These companies have always had a familiar character, their cost structure has enabled them to stay afloat during the crisis while larger companies have succumbed. The main problems that threaten their viability are the fall of the construction sector in the case of wood and the increasing imports in the case of furniture. The Industrial Observatory of the Wood Industry has made available two tools to put the latest technology available to the companies. (Author)

Microfabricated Formaldehyde Gas Sensors

Directory of Open Access Journals (Sweden)

Karen C. Cheung

2009-11-01

Full Text Available Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power gas detection. This paper reviews recent work including silicon microhotplates for metal oxide-based detection, enzyme-based electrochemical sensors, and nanowire-based sensors. This paper also investigates the promise of polymer-based sensors for low-temperature, low-power operation.

Household Finance

OpenAIRE

Campbell, John

2006-01-01

The welfare benefits of financial markets depend in large part on how effectively households use these markets. The study of household finance is challenging because household behavior is difficult to measure accurately, and because households face constraints that are not captured by textbook models, including fixed costs, uninsurable income risk, borrowing constraints, and contracts that are non-neutral with respect to inflation. Evidence on participation, diversification, and the exercise ...

Furniture and Equipment in Schools: A Purchasing Guide. Managing School Facilities, Guide 7.

Science.gov (United States)

Wadsworth, Alison

This document offers advice on the processes that should be followed when schools in the United Kingdom buy their furniture and equipment (F&E). Sections 1 and 2 examine the first steps, prior to purchasing, such as curriculum analysis and market exploration; and sections 3 and 4 explore the importance of creating a clear specification for…

NONPROCESS SOLVENT USE IN THE FURNITURE REFINISHING AND REPAIR INDUSTRY: EVALUATION OF ALTERNATIVE CHEMICAL STRIPPERS

Science.gov (United States)

The report gives results of an evaluation of the feasibility of using alternatives to high volatile organic compound/hazardous air pollutant (VOC/HAP) solvent-based, chemical strippers that are currently used in the furniture repair and refinishing industry to remove both traditi...

Levels of PM2.5/PM10 and associated metal(loid)s in rural households of Henan Province, China.

Science.gov (United States)

Wu, Fuyong; Wang, Wei; Man, Yu Bon; Chan, Chuen Yu; Liu, Wenxin; Tao, Shu; Wong, Ming Hung

2015-04-15

Although a majority of China's rural residents use solid fuels (biomass and coal) for household cooking and heating, clean energy such as electricity and liquid petroleum gas is becoming more popular in the rural area. Unfortunately, both solid fuels and clean energy could result in indoor air pollution. Daily respirable particulate matter (PM≤10 μm) and inhalable particulate matter (PM≤2.5 μm) were investigated in kitchens, sitting rooms and outdoor area in rural Henan during autumn (Sep to Oct 2012) and winter (Jan 2013). The results showed that PM (PM2.5 and PM10) and associated metal(loid)s varied among the two seasons and the four types of domestic energy used. Mean concentrations of PM2.5 and PM10 in kitchens during winter were 59.2-140.4% and 30.5-145.1% higher than those during autumn, respectively. Similar with the trends of PM2.5 and PM10, concentrations of As, Pb, Zn, Cd, Cu, Ni and Mn in household PM2.5 and PM10 were apparently higher in winter than those in autumn. The highest mean concentrations of PM2.5 and PM10 (368.5 and 588.7 μg m(-3)) were recorded in sitting rooms in Baofeng during winter, which were 5.7 and 3.9 times of corresponding health based guidelines for PM2.5 and PM10, respectively. Using coal can result in severe indoor air pollutants including PM and associated metal(loid)s compared with using crop residues, electricity and gas in rural Henan Province. Rural residents' exposure to PM2.5 and PM10 would be roughly reduced by 13.5-22.2% and 8.9-37.7% via replacing coal or crop residues with electricity. The present study suggested that increased use of electricity as domestic energy would effectively improve indoor air quality in rural China. Copyright © 2015 Elsevier B.V. All rights reserved.

Lack of conformity between Indian classroom furniture and student dimensions: proposed future seat/table dimensions.

Science.gov (United States)

Savanur, C S; Altekar, C R; De, A

2007-10-01

Children spend one-quarter of a day in school. Of this, 60-80% of time is spent in the classroom. Classroom features, such as workspace and personal space play an important role in children's growth and performance as this age marks the period of anatomical, physiological and psychological developments. Since the classroom is an influential part of a student's life the present study focused on classroom furniture in relation to students' workspace and personal space requirements and standards and was conducted in five schools at Mumbai, India. Dimensions of 104 items of furniture (chairs and desks) were measured as were 42 anthropometric dimensions of 225 students from grade six to grade nine (age: 10-14 years). Questionnaire responses of 292 students regarding the perceived adequacy of their classroom furniture were collected. Results indicated that the seat and desk heights (450 mm, 757 mm respectively) were higher than the comparable students' anthropometric dimensions and that of the recommendations of Bureau of Indian Standards (BIS) (340 + 3 mm, 380 + 3 mm seat-heights, 580 + 3 mm 640 + 3 mm desk-heights) as well as Time-Saver Standards (TSS) (381.0 mm seat-height and 660.4 mm desk-height). The depth of the seats and the desks (299 mm, 319 mm, respectively) were less than comparable students' anthropometric dimensions and the recommendations of BIS (IS 4837: 1990). Students reported discomfort in shoulder, wrist, knee and ankle regions. Based on the students' anthropometric data, proposed future designs with fixed table-heights and adjustable seat-heights along with footrests were identified.

assessment of environmental impacts in comfortable furniture production process using life cycle assessment (LCA technique

Directory of Open Access Journals (Sweden)

hejhar abbasi

2016-12-01

Full Text Available Furniture industry releases annually a large amount of volatile organic compound to the environment due to the use of adhesives, textiles, paints and coating materials. There are some different methods to measure the load of pollutions and the environmental impacts. Life cycle assessment (LCA is one of the best techniques. LCA is a technique in which all environmental impacts related to a product assessed all over its life cycle, from cradle to grave, and ultimately can be used to improve the production process and to prevent unsuitable environmental impacts. In summary, it can be concluded that the use of this technique is the basis for sustainable development and improving social, economic, and environmental indices. This study focused on the collecting of a comprehensive life cycle inventory data for comfortable furniture in two different production processes (B1 and B2 located in Tehran province, and analyzed the environmental impacts during the production process as gate to gate investigation. The results revealed that emissions in production process B1 were higher than that of production process B2. The reason for this is that basic operations such as sawing and frame assembling along with final operation have been done in the same unit for case B1. Textile production and usage, and polyurethane foam were identified as the main hotspots, respectively. Moreover, the results showed that comfortable furniture production process has the highest effects on ecosystem quality, human health, and resources (fossil fuels and mines, respectively.

Household Chemical Emergencies

Science.gov (United States)

... Content Home Be Informed Household Chemical Emergencies Household Chemical Emergencies Although the risk of a chemical accident ... reduce the risk of injury. Before a Household Chemical Emergency It is critical to store household chemicals ...

76 FR 9747 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

Science.gov (United States)

2011-02-22

..., stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

Co-brand strategy of evaluation of visual images in furniture design: Jimmy S.P.A. and STRAUSS as examples

Science.gov (United States)

Chen, Tien-Li; Pan, Fang-Ming; Tsai, Jen-Hui

2013-03-01

This study aimed to investigate the correlation of the image associated by the design Co-Brand (Jimmy S.P.A. and STRAUSS) and the impression perceived by subject of viewers. Visual images were used to examine the merit of the evaluation. The best result is provided using an object as an appropriate evaluation method. There are a lot of factors which influence to evaluation of a design. This study is limited to distinguish the appearance from Jimmy's picture books transform furniture and so on. Co-Brand of Jimmy S.P.A. and STRAUSS is not easy because there are not from the same cultural, and industry background and applying different marketing strategy, it is a way to combine the two brands by designing, used questionnaire of SD (Semantic differential evaluation) evaluation method to test out the perception of viewers, the objective of this study is to investigate and appraised the Co-Brands use by of the image in furniture from patrons. SD evaluation result showed, if design cannot understand the perception image of Jimmy S.P.A and STRAUSS with viewers mind, furniture design also can't transmit feeling with design.

User Requirements of Furniture Influenced by a Move to a Senior Housing

Directory of Open Access Journals (Sweden)

Oskar Jonsson

2012-08-01

Full Text Available User-centred design approaches within the field of furniture design for old people involves an act of embracing and balancing various end-user needs and assessing their relative importance for the product experience. It is often assumed that older people’s physiological needs dominate their other needs. In the present study, three focus group interviews were carried out with the exploratory purpose of gaining an understanding of how people feel and think about changes when moving to and living in an apartment in senior housing, outside the housing market, and what impact this has on their opinions of furniture and other interior products. Twelve people aged 59–93 took part. The outcomes of the focus group interviews point to demands on products that support the physical, psychological and social changes that relocation and aging may bring, and correspond to an independent and self-determinant identity. User requirements related to usability and affective product experience for the design of totally new or improved products are proposed. The paper discusses the complexity in the research assignment to communicate and bring end-user knowledge and experiences to life, and suggests that designers will benefit from carrying out or being involved in user-centred research.

STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA

Directory of Open Access Journals (Sweden)

Apriyanti Apriyanti

2014-07-01

Full Text Available The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a base form marketing alliance that, enclose: product or sevice alliance, promotional alliance, logistic alliance and pricing collaborations. This examination intend to give alternative of formulation strategi that will be used by company in make alliance strategy.To reach the purpose in order to get exact strategy formulation is used by analisis tool that are SWOT Matric, BCG Matric, and QSP Matric. With first base by identifying external factor and internal factors. The result of alliance strategy analysis formulation at furniture company according analysis result of SWOT Matric, BCG Matric, and QSP Matric are recommended 4 strategy that is done by each company with step priority application as follow: I Strategic service alliance, II Strategic opportunity alliance, III Strategic pricing collaboration and IV Strategic promotional alliance.

GIS DATA COLLECTION FOR PEDESTRIAN FACILITIES AND FURNITURE USING MAPINR FOR ANDROID

Directory of Open Access Journals (Sweden)

N. Naharudin

2016-09-01

Full Text Available Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

GIS Data Collection for Pedestrian Facilities and Furniture Using Mapinr for Android

Science.gov (United States)

Naharudin, N.; Ahamad, M. S. S.; Sadullah, A. F. M.

2016-09-01

Mobile GIS is introduced to reduce the time taken in completing the field data collection procedure. With the expansion of technology today, mobile GIS is not far behind. It can be integrated with the high-end innovation tools like smartphones. Spatial data capture which deemed to be the toughest stage of a GIS project is made simple with this method. Many studies had demonstrated the usage of mobile GIS in collecting spatial data and this paper discusses how it can be applied in capturing the GPS location of pedestrian furniture and facilities. Although some of the spatial data are available from local agencies, still a more detailed data is needed to create a better data model for this study. This study uses a free android application, MAPinr, which is available on the Google PlayStore to collect spatial data on site. It adopted the GNSS and cellular network positioning to locate the position of the required data. As the application allows the captured data to be exported to a GIS platform, the geometric error of the data was improved. In the end, an authenticated spatial dataset comprising pedestrian facilities and furniture in point and line form will be produced and later be used in a pedestrian network analysis study.

Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

Science.gov (United States)

Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

2018-03-22

Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

Creativity Enhancement in Lithuanian Furniture Manufacturing Business According to International Business Development

Directory of Open Access Journals (Sweden)

Rita Zybartaitė

2014-04-01

Full Text Available This article analyzes Lithuanian furniture manufacturing business perceptions towards creativity, and creativityenhancement behavior according to its international development. Firstly article focuses on international business development,substantiate need of creativity for international business development, outline creativity influencing factors which operateat individual, team and organizational levels and recommendations how to enhance creativity in methodical way. Secondly,article describes a problem of empirical research, methodology of used methods and instruments, and presents results of surveyresearch.

76 FR 52867 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Adoption of Control...

Science.gov (United States)

2011-08-24

... Large Appliance and Metal Furniture Coatings AGENCY: Environmental Protection Agency (EPA). ACTION... Technology (RACT) for sources covered by EPA's Control Techniques Guidelines (CTG) standards for large appliance and metal furniture coatings. These amendments will reduce emissions of volatile organic compound...

76 FR 52917 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Adoption of Control...

Science.gov (United States)

2011-08-24

... Large Appliance and Metal Furniture Coatings AGENCY: Environmental Protection Agency (EPA). ACTION... to adopt Reasonably Available Control Technology (RACT) for sources covered by EPA's Control Techniques Guidelines (CTG) standards for large appliance and metal furniture coatings. In the Final Rules...

The fate of Spanish furniture on the art market as reflection of its social valuation

Directory of Open Access Journals (Sweden)

Caruana Moyano, Sonsoles

2011-06-01

Full Text Available In Spain furniture did not begin to be dealt with as material for scholarly research —with notable exceptions— until the 1970s. Likewise at that time a new form of art sales appeared on the national scene in addition to antique and art dealers: auctions, invented in England 200 years earlier. Thus the scholarly and the commercial came together: rigorous publications, thorough studies and catalogues of furniture which encouraged the appearance of new pieces, in many instances via the channel of the art market- that in turn nourished serious studies. Consequently furniture began to be valued in the broadest sense of the term, leading to its conservation, its dissemination and fixing its monetary worth.

El mueble no comenzó a ser tratado en España como objeto de estudio científico —salvo honrosas excepciones— hasta la década de 1970. En ese momento irrumpe además en el panorama nacional una nueva forma de venta de arte, al margen de anticuarios y marchantes: las subastas, nacidas dos siglos atrás en Inglaterra. Así, lo académico y lo comercial se aúnan: publicaciones rigurosas, estudios concienzudos y catálogos de mobiliario, favorecen la aparición de nuevas piezas en muchas ocasiones a través del canal del mercado del arte, que, a su vez, nutren dichos estudios. Se aprende a valorar, en el sentido más amplio del término, el mobiliario. Lo que lleva a su conservación, su divulgación y también, por qué no, a establecer su valor pecuniario.

78 FR 8493 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

Science.gov (United States)

2013-02-06

... business because it has English and French customers. Because of this, we will treat Foliot Furniture Inc... electronically via Import Administration's Antidumping and Countervailing Duty Centralized Electronic Service...://www.trade.gov/ia/ . The signed Preliminary Decision Memorandum and the electronic versions of the...

75 FR 9869 - Initiation of Administrative Review of the Antidumping Duty Order on Wooden Bedroom Furniture...

Science.gov (United States)

2010-03-04

... Plastic Co., Ltd.,* Jibson Industries, Ltd.,* Always Loyal International * Baigou Crafts Factory of... Faith Limited * Brother Furniture Manufacture Co., Ltd. * C.F. Kent Co., Inc. C.F. Kent Hospitality, Inc... Company Limited * Dongguan Chunsan Wood Products Co., Ltd.,* Trendex Industries Ltd.* [[Page 9872...

CRITICAL DEVELOPMENT OF COSTING METHODS USED IN THE FURNITURE INDUSTRY, IN THE CONTEXT OF ECONOMIC REALITY SPECIAL XXI CENTURY

Directory of Open Access Journals (Sweden)

Ene Dumitru

2010-12-01

Full Text Available In the current economic downturn in the furniture industry companies, to face competition, requires new costing methods to succeed, in a flexible manner, fructifying market information, inside to find levers to identify places, resource intensive activities and then cost reduction opportunities. New methods of management cost excess the accounting and economics scope Current economic situation requires this work and converts the cost information into the main tool of insurance competitiveness and profitability of the company. Applying the standard cost in single cost model is a viable business solutions of enterprises in the furniture industry to face strong competition from European Union, specifically in the context of complex economic XXI century.

Assessing the match between female primary students’ anthropometric dimensions and furniture dimensions in Hamadan schools in 2013

Directory of Open Access Journals (Sweden)

R. Heidarimoghadam

2015-04-01

Conclusion: Despite differences in the body dimensions of primary school students, there is no regularity in using of school furniture. Overall, the dimensions of existing benches and desks are not matched with the anthropometric dimensions of students.

Plastics from household waste as a source of heavy metal pollution: An inventory study using INAA as the analytical technique

International Nuclear Information System (INIS)

Bode, P.; De Bruin, M.; Aalbers, Th.G.; Meyer, P.J.

1990-01-01

An inventory study to the levels of cadmium in the plastic component of household waste was carried out utilizing INAA as the analytical technique. In a 2-h irradiation, 2-d decay, and 1-h measurement, protocol adequate sensitivities could be obtained for Cd, but also for a group of other metals: Cr, Co, Ni, Cu, Sr, Zn, As, Se, Mo, Sn, Sb, Ba, and Hg. Red-, orange-, and yellow-colored plastics either contain Cd at high levels (over 1000 mg/kg) or have relatively low Cd concentrations (<50 mg/kg). High concentrations were also occasionally found for Sr,Se,Ba,Sb, and Hg. INAA appeared very well to be routinely usable for such analysis because of the absence of a destruction step, adequate sensitivity, high accuracy, and multielement results

76 FR 13667 - Commercial Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe...

Science.gov (United States)

2011-03-14

... Furniture Group, Inc., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Including...., Formerly Known as Falcon Products, Inc., Shelby Williams, Howe and Thonet, Chicago, IL; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of...

Concerning the deterioration of furniture: factors in decay and preventive conservation

Directory of Open Access Journals (Sweden)

Ordóñez Goded, Cristina

2011-06-01

Full Text Available This article outlines some of the principle factors in the deterioration of furniture (lighting, relative humidity, temperature, biodegradation and the human element and presents the type of maintenance work that can be carried out for their preservation denominated “preventive conservation.” These methods, while not eliminating the natural ageing of furniture, at least manage to slow down the decay of their constituent materials. Among the most important are the maintenance of optimal environmental conditions in the place where the works are located, their periodical inspection to check for possible biological infestation and their cleaning at regular intervals.

Tras una exposición sobre algunos de los principales factores de deterioro del mobiliario (iluminación, humedad relativa, temperatura, biodegradación y elemento humano, este artículo refiere brevemente al conjunto de intervenciones de mantenimiento que pueden llevarse a cabo de cara a su preservación, denominadas “de conservación preventiva”. Se habla de labores que, si bien no evitan el natural envejecimiento de los muebles, sí pueden retardar la degradación de sus materiales constitutivos. Entre ellas podríamos destacar el mantenimiento de unas condiciones ambientales óptimas del lugar en el que se encuentran ubicadas las obras, la revisión periódica de éstas con el fin de comprobar si existe o no infestación biológica, la limpieza regular de las mismas, etc.

The investigation of the relationship between the job satisfaction and job performance of employees in furniture sector

Directory of Open Access Journals (Sweden)

Türkay Türkoğlu

2017-04-01

Full Text Available Manpower and performance of employees in furniture industry plays an important role in the quality of the products. It is necessary to ensure the job satisfaction of employees to achieve their high performance. “The Minnesota Job Satisfaction Scale” and “the Job Performance Scale” were used as data collection tools in the study. Therefore, questionnaire form was conducted on 362 employees of furniture sector. Obtained data was analyzed in SPSS program by means of Correlation and Regression Analyses, t-test and ANOVA. The result of the study shows that there is a strong relationship between job satisfaction and employees performance. While there were significant differences in job satisfaction and job performance in term of some employees’ demographic characteristics such as gender, age, educational status and seniority, it wasn’t found significant difference in marital status.

Do animals and furniture items elicit different brain responses in human infants?

Science.gov (United States)

Jeschonek, Susanna; Marinovic, Vesna; Hoehl, Stefanie; Elsner, Birgit; Pauen, Sabina

2010-11-01

One of the earliest categorical distinctions to be made by preverbal infants is the animate-inanimate distinction. To explore the neural basis for this distinction in 7-8-month-olds, an equal number of animal and furniture pictures was presented in an ERP-paradigm. The total of 118 pictures, all looking different from each other, were presented in a semi-randomized order for 1000ms each. Infants' brain responses to exemplars from both categories differed systematically regarding the negative central component (Nc: 400-600ms) at anterior channels. More specifically, the Nc was enhanced for animals in one subgroup of infants, and for furniture items in another subgroup of infants. Explorative analyses related to categorical priming further revealed category-specific differences in brain responses in the late time window (650-1550ms) at right frontal channels: Unprimed stimuli (preceded by a different-category item) elicited a more positive response as compared to primed stimuli (preceded by a same-category item). In sum, these findings suggest that the infant's brain discriminates exemplars from both global domains. Given the design of our task, we conclude that processes of category identification are more likely to account for our findings than processes of on-line category formation during the experimental session. Copyright © 2009 Elsevier B.V. All rights reserved.

Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

Directory of Open Access Journals (Sweden)

Jegatheswaran Ratnasingam

2015-12-01

Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

Predictors of monoterpene exposure in the Danish furniture industry.

Science.gov (United States)

Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

2012-04-01

Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a

Influence of Machine Exploitation Effectiveness on Furniture Production Quality Level

Directory of Open Access Journals (Sweden)

Stasiak-Betlejewska Renata

2015-12-01

Full Text Available One of the most important factors determining the company‘s capacity to produce high quality products is the level of machinery operation effectiveness. Companies having modern machinery are characterized by high productivity. To obtain a high quality product, the equipment should be properly used, without any failure, which contributes significantly to the exploitation level increase. The modernity level and the exploitation effectiveness level for chosen machine producing furniture components in relation to the product quality level were analysed in the paper. As a result of the research findings analysis, proposals for corrective actions with regard to machinery maintenance and production processes were presented.

The furniture of the library of the Glasgow School of Art by Charles Rennie Mackintosh (1868-1928) [dissertation

OpenAIRE

Bell, John; Bell, Simon

1991-01-01

This dissertation, which encompasses the set of furniture and light fittings designed for use in Glasgow School of Art library has been produced in response to the desire for the complete recording and analysis of that space.

Essays on household time allocation decisions in a collective household model

OpenAIRE

Silvennoinen, Heidi

2008-01-01

This thesis considers the consequences of traditional division of labour in households in a setting where spouses are allowed to have distinct preferences. This approach leads to different results compared to the traditional unitary approach and is better equipped to take into consideration gender related issues of household decision making. The thesis consists of three theoretical essays where the household production theory is applied in the collective household model. The first essay ...

Flooring-systems and their interaction with furniture and humans

DEFF Research Database (Denmark)

Frier, Christian; Pedersen, Lars; Andersen, Lars Vabbersgaard

2017-01-01

Flooring-system designs may be sensitive in terms of their vibrational performance due the risk that serviceability-limit-state problems may be encountered. For evaluating the vibrational performance of a flooring system at the design stage, decisions must be made by the engineer in charge...... of computations. Passive humans and/or furniture are often present on a floor. Typically, these masses and their way of interacting with the floor mass are ignored in predictions of vibrational behaviour of the flooring system. Utilizing a shell finite-element model, the paper explores and quantifies how non......-structural mass can influence central parameters describing the dynamic behaviour of the flooring system with focus on elevated non-structural mass. © 2017 The Authors. Published by Elsevier Ltd....

Cigarette Fires Involving Upholstered Furniture in Residences: The Role that Smokers, Smoker Behavior, and Fire Standard Compliant Cigarettes Play

Science.gov (United States)

Butry, David T.; Thomas, Douglas S.

2017-01-01

Residential structure fires pose a significant risk to life and property. A major source of these fires is the ignition of upholstered furniture by cigarettes. It has long been established that cigarettes and other lighted tobacco products could ignite upholstered furniture and were a leading cause of fire deaths in residences. In recent years, states have adopted fire standard compliant cigarettes (‘FSC cigarettes’) that are made with a wrapping paper that contains regularly spaced bands, which increases the likelihood of self-extinguishment. This paper measures the effectiveness of FSC cigarettes on the number of residential fires involving upholstered furniture, and the resulting fatalities, injuries, and extent of flame spread, while accounting for the under-reporting of fire incidents. In total, four models were estimated using fire department data from 2002 to 2011. The results provide evidence that FSC cigarettes, on average, reduced the number of residential fires by 45 %, reduced fatalities by 23 %, and extent of flame spread by 27 % in 2011. No effect on injuries was found. Within each state, effectiveness is moderated by the number of smokers and their consumption patterns. In general, FSC cigarettes are more effective in places with a large smoking population who engage in heavier smoking. There is a very limited effect on the lightest of smokers, suggesting behavioral differences between heavy and light smokers that influence fire risk. PMID:28751788

Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

Science.gov (United States)

David Nicholls; Matthew Bumgardner

2007-01-01

This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

Science.gov (United States)

David Nicholls; Matthew Bumgardner

2007-01-01

This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

76 FR 53409 - Wooden Bedroom Furniture From the People's Republic of China: Corrected Notice of Court Decision...

Science.gov (United States)

2011-08-26

... International Ltd. (``Evergreen'') and Jayaraja Furniture (``Jayayraja'') from the surrogate financial ratio..., Nizamuddin and Swaran) to derive the financial ratios pursuant to the lower Court's order in Dorbest II.\\14... Department also recalculated the surrogate financial ratios applied to Dorbest, and re-included the financial...

Metals Exposures of Residents Living Near the Akaki River in Addis Ababa, Ethiopia: A Cross-Sectional Study

Directory of Open Access Journals (Sweden)

Ellen Yard

2015-01-01

Full Text Available Background. The Akaki River in Ethiopia has been found to contain elevated levels of several metals. Our objectives were to characterize metals exposures of residents living near the Akaki River and to assess metal levels in their drinking water. Methods. In 2011, we conducted a cross-sectional study of 101 households in Akaki-Kality subcity (near the Akaki River and 50 households in Yeka subcity (distant to the Akaki River. One willing adult in each household provided urine, blood, and drinking water sample. Results. Urinary molybdenum (p<0.001, tungsten (p<0.001, lead (p<0.001, uranium (p<0.001, and mercury (p=0.049 were higher in Akaki-Kality participants compared to Yeka participants. Participants in both subcities had low urinary iodine; 45% met the World Health Organization (WHO classification for being at risk of moderate iodine deficiency. In Yeka, 47% of households exceeded the WHO aesthetic-based reference value for manganese; in Akaki-Kality, only 2% of households exceeded this value (p<0.001. There was no correlation between metals levels in water samples and clinical specimens. Conclusions. Most of the exposures found during this investigation seem unlikely to cause acute health effects based on known toxic thresholds. However, toxicity data for many of these metals are very limited.

National Alcohol Survey of households in Trinidad and Tobago (NASHTT: Alcohol use in households

Directory of Open Access Journals (Sweden)

R.G. Maharaj

2017-04-01

Full Text Available Abstract Background To determine the patterns of alcohol use among households in Trinidad and Tobago (T&T and to estimate the association between alcohol use and negative psychological, social, or physical events experienced by the household. Methods A convenience sample of 1837 households across T&T. We identified bivariate correlates of alcohol use, and heavy episodic drinking using chi-square and t-test analyses and used multivariable logistic regression to estimate adjusted associations between household alcohol use and experiences within the past 12 months adjusted for sociodemographic covariates. Results One thousand five hundred two households had complete data for all variables (82% response rate. Nearly two thirds (64% of households included alcohol users; 57% of household that consumed alcohol also reported heavy episodic drinking. Households that reported alcohol consumption were significantly more likely to report illnesses within the households, relationship problems, and behavioral and antisocial problems with children. Among households where a member was employed, those who consumed alcohol were nearly twice as likely (OR = 1.98; 95% confidence interval (CI 1.03, 3.82 to have a household member call in sick to work and 2.9 times as likely (OR = 2.9; CI 1.19, 7.04 to have a household member suffer work related problems compared with households who reported not consuming alcohol. Conclusions Approximately two thirds of households in T&T reported using alcohol. These households were more likely to report psychological, physical, and social problems. These findings would support efforts to enforce current policies, laws, and regulations as well as new strategies to reduce the impact of harmful alcohol consumption on households in T&T.

STRATEGI ALIANSI DALAM MENGHADAPI GLOBALISASI (STUDY PADA PERUSAHAAN FURNITURE DI KABUPATEN JEPARA)

OpenAIRE

Apriyanti Apriyanti

2014-01-01

The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can’t fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

Strategi Aliansi dalam Menghadapi Globalisasi (Study pada Perusahaan Furniture di Kabupaten Jepara)

OpenAIRE

Apriyanti, Apriyanti

2014-01-01

The problem that is faced by furniture entrepreneur at Jepara is limitation of production capacity and limitation of design that have had. So produce can't fulfi the buyer demand in at a certain time. This case can be anticipated by make an alliance strategy between several companies, where this solution is main alternative to face the problem. This strategy model was proposed by Michael Yoshino and Rosabeth Kanter where alliance strategy can be happen in various form, which in fact it is a b...

76 FR 28000 - Procurement List Proposed Additions and Deletions

Science.gov (United States)

2011-05-13

... Contracting Activity: GSA/FSS Household and Industrial Furniture, Arlington, VA. Coverage: A-List for the... Development of Growth & Educational Services, Inc., Pomona, CA. Contracting Activity: General Services...

Optimization of a furniture factory layout

Directory of Open Access Journals (Sweden)

Tadej Kanduč

2015-03-01

Full Text Available This paper deals with the problem of optimizing a factory floor layout in a Slovenian furniture factory. First, the current state of the manufacturing system is analyzed by constructing a discrete event simulation (DES model that reflects the manufacturing processes. The company produces over 10,000 different products, and their manufacturing processes include approximately 30,000 subprocesses. Therefore, manually constructing a model to include every subprocess is not feasible. To overcome this problem, a method for automated model construction was developed to construct a DES model based on a selection of manufacturing orders and relevant subprocesses. The obtained simulation model provided insight into the manufacturing processes and enable easy modification of model parameters for optimizing the manufacturing processes. Finally, the optimization problem was solved: the total distance the products had to traverse between machines was minimized by devising an optimal machine layout. With the introduction of certain simplifications, the problem was best described as a quadratic assignment problem. A novel heuristic method based on force-directed graph drawing algorithms was developed. Optimizing the floor layout resulted in a significant reduction of total travel distance for the products.

Use of Computer Simulation in Designing and Evaluating a Proposed Rough Mill for Furniture Interior Parts

Science.gov (United States)

Philip A. Araman

1977-01-01

The design of a rough mill for the production of interior furniture parts is used to illustrate a simulation technique for analyzing and evaluating established and proposed sequential production systems. Distributions representing the real-world random characteristics of lumber, equipment feed speeds and delay times are programmed into the simulation. An example is...

78 FR 23495 - Approval and Promulgation of Air Quality Implementation Plans; Illinois; Small Container...

Science.gov (United States)

2013-04-19

... technology (RACT) policy. DATES: This final rule is effective on May 20, 2013. ADDRESSES: EPA has established... repair coatings used by a can, coil, vinyl, metal furniture and magnet wire coating operation, provided..., including can, coil, vinyl, metal furniture, and magnet wire coatings. (4) Illinois EPA and ACA agree that...

Farm Households Food Production and Households' Food Security ...

African Journals Online (AJOL)

Food is an important basic human need for survival, growth, and good health. Most rural households in Tanzania, Kahama district inclusive produce the food they consume. Despite this reality, a number of households in the district suffer from food insecurity. However, there are inequalities across the districtfs ecological ...

[From mandatory to participatory prevention: a model applied to the upholstered furniture industry].

Science.gov (United States)

Di Leone, G; Trani, G; Falco, S; Attimonelli, Rossella; Carino, M; Lagravinese, D

2008-01-01

The Italian 2006-2008 National Health Plan emphasizes synergy and cooperation between the agencies formally involved in the prevention of occupational risks, in agreement with social partners. The so-called 'triangle of the sofa industry' is an interregional geographic area south-west of Bari, Italy. In 2003 this area produced 16% of the world-wide upholstered furniture output, with more than 500 plants of varying size. The aim was to set up a network of communication and cooperation between the competent Agencies and Regions in order to address the rising trend of upper limb work-related musculoskeletal disorders. The first step of the National Health Service Unit in Bari was to assess risk via a Ministerial research project and implement various information campaigns involving institutions, occupational physicians, private companies and public opinion. In a subsequent phase a synergy between the local Departmenst ofPrevention of the different Regions, the Italian Institute for Insurance Occupational Accidents and Disease (INAIL), the trade unions and the upholstered furniture industry Association was established. New joint experimental projects (cutting tools, ergonomic table for assemblers, instruments for isokinetic evaluation) were launched together with training programmes for management, safety technicians and workers. This kind of 'participatory prevention' is more appropriate for the goal of a collaborative effort in order to assist the companies, which is a modern interpretation of the mission of public health prevention operators.

DIAGNOSIS OF BANKRUPTCY RISK IN THE FURNITURE INDUSTRY USING THE CANON-HOLDER AND ALTMAN MODELS

Directory of Open Access Journals (Sweden)

Radu MĂRGINEAN

2015-06-01

Full Text Available The financial and economic crisis that started in 2008 caused negative effects felt by the entire European economy, affecting more or less all of the world's economies. This paper aims to study the diagnosis of bankruptcy risk using the Canon-Holder and Altman methods, from a theoretical point of view and with practical examples on a company in the furniture industry in Romania. In a context of economic uncertainty, the relevance of such an analysis designed to quantify the risk of bankruptcy for companies is the default. The financial data used is real and descriptively analyzed, we analyzed a period of eight years, between 2006-2013. As a method of analysis complementary to the financial analysis of the background of companies, the diagnosis of bankruptcy risk using the score method, using the specific models known in the specialty literature, brings relevant information concerning the problem of risk assessment. We concluded in the case study the opportunity of such an analysis for the furniture industry through the results obtained in the case studies, the method is a useful tool, especially for the practitioners in the sector.

Environmental impact of household activity in Spain

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Choliz, Julio; Duarte, Rosa; Mainar, Alfredo [Department of Economic Analysis University of Zaragoza Gran Via 2, 50005, Zaragoza (Spain)

2007-04-20

The objective of this paper is to analyse the environmental impacts of the Spanish economy by way of water and atmospheric pollution on the basis of a Spanish Accounting Matrix for 1999. Only households were taken as an exogenous account. The pollution measures are estimated for seven categories of pollution: three atmospheric pollutants (CO{sub 2}, NO{sub x} and SO{sub x}) and four indicators for water (waste water, nitrogen, metals and biological oxygen demand (BOD)). The environmental data base was obtained from the Spanish Statistical Institute. The analysis reveals that pollution in Spain is closely linked to food production, energy, extractive industries and paper manufacturing. We show that services, taken as a whole, are major polluters, though this is due to the volume of household expenditure they represent rather than their pollution potential as such. We also show that the Spanish economy avoids a great deal of pollution by importing inputs, which pollute where they are produced. Finally, the study also provides per capita pollution values for the aforementioned seven pollutants. (author)

Household activity-travel behavior : implementation of within-household interactions

NARCIS (Netherlands)

Anggraini, R.

2009-01-01

Although the importance of households as a decision making unit has been recognized in seminal work in activity-based analysis of transport demand, most comprehensivemodels have relied on individual activity-travel patterns. The transformation of thesemodels to household level models and the

Households and food security: lessons from food secure households in East Africa.

NARCIS (Netherlands)

Silvestri, Silvia; Douxchamps, Sabine; Kristjanson, Patti; Förch, Wiebke; Radeny, Maren; Mutie, Lanetta; Quiros, F.C.; Herrero, M.; Ndungu, Anthony; Claessens, L.F.G.

2015-01-01

Background
What are the key factors that contribute to household-level food security? What lessons can we learn from food secure households? What agricultural options and management strategies are likely to benefit female-headed households in particular? This paper addresses these questions

DSM energy saving pilot project report. Furniture Plant Teika, Riga, Latvia

International Nuclear Information System (INIS)

Ananevski, V.; Kalejs, M.; Hercogs, J.; Blumbergs, U.

1995-07-01

The purpose of this pilot project was to carry out energy audit into the furniture plant TEIKA and energy saving measures. Another aim was to transfer the Danish know how and experience obtained through the Danish effort in Latvian industries consumers. Therefore great attention is paid to energy mapping in order to show possibilities of the Danish methodisms. This report is a part of the Joint Latvian - Danish Project Demand Side Management and Energy Saving. It is a results of collaborative efforts between a Latvian team, consisting of the specialists from Latvenergo and on the other hand a Danish team, which was represented by the Danish Power Consult company NESA. (EG)

Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

Science.gov (United States)

Matthew Bumgardner; David Nicholls; Valerie Barber

2009-01-01

In recent decades. red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade lumber containing numerous visual...

Estimating household food waste in Denmark:case study of single family households

DEFF Research Database (Denmark)

Edjabou, Vincent Maklawe Essonanawe; Petersen, C.; Scheutz, Charlotte

and determine potential improvements. In Denmark, although many sorting campaigns involving household waste has been conducted, little attention has been placed on food waste. Comparison of recent studies made for examples in Austria, and the UK suggests that quantity and material composition of food waste vary...... waste and non-avoidable vegetable food waste. Furthermore, avoidable vegetable and animal food waste were the primary source of household food waste. Statistical analysis found a positive linear relationship between household size and the amount of the household food waste suggesting the amount...

26 CFR 1.861-4 - Compensation for labor or personal services.

Science.gov (United States)

2010-04-01

...), nonrefundable fees paid for securing a leasehold, rental of furniture and accessories, household repairs... ascertainable fair market value when granted. The stock options permit J to purchase 100 shares of Company Q...

Efficient Intra-Household Allocations

DEFF Research Database (Denmark)

Browning, Martin

demands must satisfy a symmetry and rank condition on the Slutsky matrix. We also present some further results on the effects on demands of variables that do nor modify preferences but that do affect how decisions are made. We apply our theory to a series of surveys of household expendityres from Canada......The neo-classical theory of demand applies to individuals yet in empirical work it is usually taken as valid for households with many members. This paper explores what the theory of individuals implies for households with many members. This paper explores what the theory of individuals implies...... for households which have more than one member. We make minimal assumptions about how the individual members of the household resolve conflicts. All we assume is that however decisions are made, outcomes are efficient. We refer to this as the collective setting. We show that in the collective setting household...

Household Wealth in China

Science.gov (United States)

Xie, Yu; Jin, Yongai

2015-01-01

With new nationwide longitudinal survey data now available from the China Family Panel Studies (CFPS), we study the level, distribution, and composition of household wealth in contemporary China. We find that the wealth Gini coefficient of China was 0.73 in 2012. The richest 1 percent owned more than one-third of the total national household wealth, while the poorest 25 percent owned less than 2 percent. Housing assets, which accounted for over 70 percent, were the largest component of household wealth. Finally, the urban-rural divide and regional disparities played important roles in household wealth distribution, and institutional factors significantly affected household wealth holdings, wealth growth rate, and wealth mobility. PMID:26435882

Family and household demography

NARCIS (Netherlands)

Willekens, F.J.C.; Zeng, Yi

2009-01-01

Households are groups of people that co-reside and share some resources. Families are households of related individuals. Household and family demography is the study of these primary social groups or social units, and in particular of group membership and the relationships between members of the

A new approach of the design process for replacing wooden parts of furniture

Directory of Open Access Journals (Sweden)

Ciupan Cornel

2017-01-01

Full Text Available Based on different design processes for innovative products, the paper presents a new approach of the process. The new method studies the problem of replacing the wooden components of the resistance structure of furniture with other materials. This is a reverse engineering process, that starts with the entire component, following a series of steps to the part drawings, ready for manufacturing. The method was validated by redesigning some parts of the upholstered products manufactured by TAPARO Company, by replacing the wooden parts of the resistance structure of sofas with composite material.

Study of educational furniture conformity with students anthropometric dimensions of Isfahan university of medical sciences

Directory of Open Access Journals (Sweden)

mehdi Sadeghi

2010-02-01

Full Text Available Musculoskeletal disorders, early fatigue induced by static work and the same symptoms are caused by inappropriate designed tools, equipment, building and workplace. Inadequate educational furniture is taken to be the reason of severe posture problems such as low back pain, spinal disorders, fatigue, shoulder and neck pain, and disturbance circulation in legs. So ergonomic design of educational furniture should be carefully considered. Materials and Methods: The present research was a cross-sectional study. Samples included desks and chairs (n=150 chosen from reading rooms of dormitories and faculties of Isfahan university of medical sciences Isfahan- Iran. In the study 2 parameters from desk and 5 parameters from chairs were assessed using a tape-measure and a set-sqare. Data were analyzed by SPSS ver 10 software. Results: Comparing the results from the mean of measured values (for seating height, desk height and desk clearance indicated a significant difference between them (p<0. 00. Conclusion: Findings of the study showed that existing standard in Iran about chairs and tables for educational institutions should be reviewed. Also the most important problem with chairs and desks are seating height and desk surface height respectively. These two parameters didn’t match with anthropometric dimensions of the sudents of Isfahan university of medical sciences.

Tisettanta case study: the interoperation of furniture production companies

Science.gov (United States)

Amarilli, Fabrizio; Spreafico, Alberto

This chapter presents the Tisettanta case study, focusing on the definition of the possible innovations that ICT technologies can bring to the Italian wood-furniture industry. This sector is characterized by industrial clusters composed mainly of a few large companies with international brand reputations and a large base of SMEs that manufacture finished products or are specialized in the production of single components/processes (such as the Brianza cluster, where Tisettanta operates). In this particular business ecosystem, ICT technologies can bring relevant support and improvements to the supply chain process, where collaborations between enterprises are put into action through the exchange of business documents such as orders, order confirmation, bills of lading, invoices, etc. The analysis methodology adopted in the Tisettanta case study refers to the TEKNE Methodology of Change (see Chapter 2), which defines a framework for supporting firms in the adoption of the Internetworked Enterprise organizational paradigm.

Impact of the Financial Crisis of 2008 on Furniture Industry in the Czech Republic and Development of Tangible Fixed Assets in 2005– 2012 and its Possible Renewal

Directory of Open Access Journals (Sweden)

Tomáš Najbrt

2016-01-01

Full Text Available This paper is focused on furniture firms in the Czech Republic during the period 2005–2012, which covers the year of the crisis. The aim was to assess the given economic situation of the manufacturing businesses comparing some of the economic indicators such as tangible fixed assets, revenue from own production and services, pre-tax profit and labor costs. The study was conducted in the Czech Republic using the data provided by the Czech Statistical Office. Results for the specified period and selected groups of micro furniture companies are shown; dependence of economic indicators within the given time period is also analyzed. The analysis has shown that the smallest of the firms were least affected by the economic crisis; moreover, the medium-sized of the companies exhibit tangible assets growth and certain degree of inertia in years 2008 and 2009. Finally, possibilities how the micro furniture companies could proceed when purchasing new technologies are outlined.

Households' portfolio choices

NARCIS (Netherlands)

Hochgürtel, S.

1998-01-01

This thesis presents four topics on households' portfolio choices. Empirically, households do not hold well-diversified wealth portfolios. In particular, they refrain from putting their savings into risky assets. We explore several ways that might help explaining this observation. Using Dutch

Art Deco Furniture Designs in Republican Era: Selahattin Refik Sırmalı and the Study Room of Atatürk

Directory of Open Access Journals (Sweden)

Çiler Buket Tosun

2014-12-01

Full Text Available This study presents the works of Selahattin Refik who played an active role in the Republican Era Architecture through his modern practices in interior architecture and furniture design. Practicing the most recent and popular art of his time, Art Deco, Refik also received the appreciation of Atatürk, and was influential in the first twenty years of the Republic. This study focuses on his interior and furniture designs for the ‘Study Room’ designed for Ataturk at the ‘Ataturk Museum House which is the first Official Residence of the President of the Republic of Turkey. Pioneering original Art Deco practices of our country, the ‘Study Room’ has been an implementation that illustrates not only the originality and competency of Selahattin Refik in practicing the modern art of the era but also the reflection of the modern identity of the Republic on interior designs.

Competition for the Elements of the City Environment for Irkutsk’s Public Spaces: Street Furniture, Street Design

Directory of Open Access Journals (Sweden)

Tatyana Danilova

2016-10-01

Full Text Available The article reviews the contest «Street furniture. Street design», which was held this summer by manufacturing company «PalpNord», International research laboratory of study and design of the urban environment «Urban Planning School» and the Union of Architects of Russia. The winners and their projects are also listed in the article.

Correlates of Intra-Household ITN Use in Liberia: A Multilevel Analysis of Household Survey Data.

Science.gov (United States)

Babalola, Stella; Ricotta, Emily; Awantang, Grace; Lewicky, Nan; Koenker, Hannah; Toso, Michael

2016-01-01

Malaria is a major cause of morbidity and mortality in Liberia. At the same time, insecticide-treated net (ITN) ownership and use remain low. Access is a key determinant of ITN use but it is not the only one; prior studies have identified factors that affect the use of ITNs in households with at least one ITN. These factors operate at the individual, household, and community levels. However, studies have generally not assessed the psychosocial or ideational determinants of ITN use. Using 2014 household survey data, this manuscript examines the socio-demographic, ideational, household, and community factors associated with household member use of ITNs in Liberia. Multilevel modeling was used to assess fixed effects at the individual, household, and community levels, and random effects at the household and cluster levels. The data showed significant residual clustering at the household level, indicating that there were unmeasured factors operating at this level that are associated with ITN use. The association of age with ITN use was moderated by sex such that men, older children, and teenagers were less likely to sleep under an ITN compared to women and children under five years old. Female caregivers' perceived severity of malaria, perceived self-efficacy to detect a complicated case of malaria, and exposure to the "Take Cover" communication campaign were positively associated with ITN use by members of her household. The association with household size was negative, while the relationship with the number of ITNs was positive. Programs should seek to achieve universal coverage (that is, one ITN for every two household members) and promote the notion that everyone needs to sleep under an ITN every night. Programs should also seek to strengthen perceived severity of malaria and educate intended audience groups on the signs of malaria complications. Given the significance of residual clustering at the household level, interventions that engage men as heads of

Children's recognition of dangerous household products: child development and poisoning risk.

Science.gov (United States)

Schwebel, David C; Wells, Hayley; Johnston, Anna

2015-03-01

Preliterate children may be poisoned because they fail to distinguish safe versus hazardous household products. Study 1: A total of 228 children aged 18-54 months completed four tasks assessing ability to recognize product safety. Study 2: A total of 68 children aged 17-31 months chose products to drink from pairs of dangerous versus beverage bottles. Study 3: A total of 119 children aged 18-42 months sorted 12 objects into toys, things you can drink, and things that are bad/dangerous. Left alone, children frequently touched dangerous household products. Children frequently misidentified poisonous products as safe. Some developmental trends emerged. The following packaging features apparently helped children recognize danger: black bottle color; opaque packaging; salient symbols like insects; lack of pointy spouts; squared, not round, bottles; and metal, not plastic, containers. Developing cognition helps preliterate children distinguish safe from dangerous household products. Multiple aspects of product packaging may reduce child poisoning risk if implemented by industry or policy. © The Author 2014. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Household financial behavior

NARCIS (Netherlands)

Brounen, Dirk; Koedijk, Kees; Pownall, Rachel

2016-01-01

Greater personal responsibility toward financial decision-making is being advocated on a global basis. Individuals and households are encouraged to take a more active approach to personal finance. In this paper, we examine behavioral factors, which lead households toward savings and financial

Incarceration in the household: academic outcomes of adolescents with an incarcerated household member.

Science.gov (United States)

Nichols, Emily Bever; Loper, Ann Booker

2012-11-01

The United States has the highest incarceration rate in the world, yet there is relatively little information on how the removal of these adults from households impacts the youth who are left behind. This study used a child-centered lens to examine the impact of incarceration on the school outcomes of youth who resided with a family member or family associate who was incarcerated prior to the youth's 18th birthday. We used data from 11 waves of the National Longitudinal Survey of Youth: Child and Young Adult (n = 3,338, 53 % female). Initial analyses indicated that youth who experienced a household members' incarceration evidenced more socioeconomic challenges, more frequent home adversities, and lower cognitive skills relative to youth who did not experience a household members' incarceration. Results also revealed that youth who had experienced a household member's incarceration were more likely to report extended absence from school and were less likely to graduate from high school relative to those youth who did not experience a household members' incarceration. Counter to our hypotheses, results revealed the incarceration of an extended family member being in the household was the only relation significantly associated with worse school outcomes. Plausibly, families who allow non-immediate criminally involved individuals to reside in the household are experiencing a more pervasive chaotic home environment than those with a parent or sibling incarcerated. Our study suggests that efforts to address the needs of children with incarcerated parents need to be widened to those who experience the loss of any household member due to incarceration.

Procurement Opportunitites in: Afghanistan and the Central Asian States (CAS)

Science.gov (United States)

2012-08-01

barriers) Furniture (office and household) Prefabricated Structures (CONEXs, containerized housing units, re-locatable buildings) Office Supplies... Concrete Foundation and Structure Road Support Activities Minor Building Renovation Water and Sewer Line and Related Construction Heavy and Civil

Households and the Welfare State

OpenAIRE

Gustavo Ventura

2012-01-01

Consider the following facts. First, with dramatic changes in the household and family structure in every major industrialized country during the last couple of decades, today's households are very far from traditional breadwinner husband and housekeeper wife paradigm. Second, average households face significant uninsurable idiosyncratic risk and countries differ significantly on their social insurance expenditure. Third, since mid 1980s, household income inequality has been rising, generatin...

Contact allergy to finished woods in furniture and furnishings: a small allergic contact dermatitis epidemic to western red cedar in sauna interior decoration.

Science.gov (United States)

Huilaja, L; Kubin, M E; Riekki, R

2016-01-01

Allergic contact dermatitis caused by wood dust remains uncommon and most cases are occupational. Contact allergy to finished wooden products is even more rare and only few cases of contact dermatitis to wooden furnishings and furniture are described. During 2012-2014 surprisingly many patients with dermatitis associated to sauna baths were referred to our clinic. We report three novel cases with allergic contact dermatitis to western red cedar due to exposure during sauna baths. Three cases of non-occupational contact dermatitis to western red cedar were confirmed by patch testing. Allergic contact dermatitis to interior decoration or furniture is a rarity, but can be induced by novel exposures, like western red cedar in sauna interior decoration. © 2015 European Academy of Dermatology and Venereology.

Hardwood lumber widths and grades used by the furniture and cabinet industries: Results of a 14-mill survey

Science.gov (United States)

Jan Wiedenbeck; John Brown; Neal Bennett; Everette Rast

2003-01-01

Data on red oak lumber width, length, and grade were collected at 14 furniture and cabinet industry rough mills to identify relationships among these lumber attributes and the degree to which they differ from mill to mill. Also, this information is needed to formulate valid lumber size distributions that will improve the quality of theresults obtained in mill and...

IMPACTS OF DIFFERENT JOINT ANGLES AND ADHESIVES ON DIAGONAL TENSION PERFORMANCES OF BOX-TYPE FURNITURE

Directory of Open Access Journals (Sweden)

Musa Atar

2010-02-01

Full Text Available The goal of this study was to determine the effects of different joint angles and adhesives on diagonal tension performances of the box-type furniture made from solid wood and medium density fiberboard (MDF. After drilling joints of 75º, 78º, 81º, 84º, and 87º degrees on Oriental beech, European oak, Scotch pine, and MDF samples, a diagonal tensile test was applied on corners glued with polyvinyl acetate (PVAc and polyurethane (D-VTKA = Desmodur-Vinyl Trieketonol Acetate according to ASTM D 1037 standard. With reference to the obtained results, the highest tensile strength was obtained in European oak with PVAc glue and joint angle of 84º, while the lowest value was obtained in MDF with D-VTKA glue and joint angle of 75º. Considering the interaction of wood, adhesive, and joint angle, the highest tensile strength was obtained in European oak with joint angle of 81º and D-VTKA glue (1.089 N.mm-2, whereas the lowest tensile strength was determined in MDF with joint angle of 75º and PVAc glue (0.163 N.mm-2. Therefore, PVAc as glue and 81º as joint angle could be suggested to obtain some advantageous on the dovetail joint process for box-type furniture made from both solid wood and MDF.

Household Factors Associated with Self-Harm in Johannesburg, South African Urban-Poor Households.

Directory of Open Access Journals (Sweden)

Nisha Naicker

Full Text Available Low and middle income countries bear the majority burden of self-harm, yet there is a paucity of evidence detailing risk-factors for self-harm in these populations. This study aims to identify environmental, socio-economic and demographic household-level risk factors for self-harm in five impoverished urban communities in Johannesburg, South Africa.Annual serial cross-sectional surveys were undertaken in five impoverished urban communities in Johannesburg for the Health, Environment and Development (HEAD study. Logistic regression analysis using the HEAD study data (2006-2011 was conducted to identify household-level risk factors associated with self-harm (defined as a self-reported case of a fatal or non-fatal suicide attempt within the household during the preceding year. Stepwise multivariate logistic regression analysis was employed to identify factors associated with self-harm.A total of 2 795 household interviews were conducted from 2006 to 2011. There was no significant trend in self-harm over time. Results from the final model showed that self-harm was significantly associated with households exposed to a violent crime during the past year (Adjusted Odds Ratio (AOR 5.72; 95% CI 1.64-19.97; that have a member suffering from a chronic medical condition (AOR 8.95; 95% 2.39-33.56 and households exposed to indoor smoking (AOR 4.39; CI 95% 1.14-16.47.This study provides evidence on household risk factors of self-harm in settings of urban poverty and has highlighted the potential for a more cost-effective approach to identifying those at risk of self-harm based on household level factors.

Understanding Inflation and Revising National Price Data

International Development Research Centre (IDRC) Digital Library (Canada)

Pete

In parallel, official inflation statistics attribute inflation to other expenditure items. Whereas ..... Finally, instead of using a fixed-based index, other methods employ non-fixed bases for ...... Furniture and Household Maintenance. 7.9. 3.9. 8.18.

Promoting household energy conservation

International Nuclear Information System (INIS)

Steg, Linda

2008-01-01

It is commonly assumed that households must change their behaviour to reduce the problems caused by increasing levels of fossil energy use. Strategies for behaviour change will be more effective if they target the most important causes of the behaviour in question. Therefore, this paper first discusses the factors influencing household energy use. Three barriers to fossil fuel energy conservation are discussed: insufficient knowledge of effective ways to reduce household energy use, the low priority and high costs of energy savings, and the lack of feasible alternatives. Next, the paper elaborates on the effectiveness and acceptability of strategies aimed to promote household energy savings. Informational strategies aimed at changing individuals' knowledge, perceptions, cognitions, motivations and norms, as well as structural strategies aimed at changing the context in which decisions are made, are discussed. This paper focuses on the psychological literature on household energy conservation, which mostly examined the effects of informational strategies. Finally, this paper lists important topics for future research

The Effect of Differences Between User’ Characteristics and Socio-Economic Status on the Brand Furniture Preference

OpenAIRE

Arslan, Ali Rıza; DORUK, Şemsettin; BURDURLU, Erol

2009-01-01

The effect of product properties produced by physical production process and the brand created over communication and the brand perception on user (customer) demand is known reality. The brand behavior according as the brand perception changing owing to the customer properties. In this study, the effect of some user characteristics like age, sex, marital status, occupation, income state, residence, property state of their house on brand furniture preference was examined. A relevant questionna...

Urban household energy consumption in Thailand

Energy Technology Data Exchange (ETDEWEB)

Pongsapich, Amara; Wongsekiarttirat, Wathana (Chulalongkorn Univ., Bangkok (Thailand). Social Research Inst.)

1994-05-01

This study was aimed at developing a better understanding of urban household energy consumption in Thailand through a series of in-depth household energy surveys. Households in urban areas used electricity, LPG, charcoal and fuelwood. Traditional biomass fuels such as husk and dung, as well as kerosene, were essentially not used in urban households. Nearly all households used electricity and most households used LPG. Some households used more than one fuel for cooking, particularly LPG and charcoal. There was a great difference in electricity used between the households in Bangkok and other urban areas. Most households in the study areas used LPG stove or burners for cooking. But charcoal stoves were also used by many households for specific culinary purposes. Electric rice-cookers are widely used for convenience. The study suggests that the number of households using charcoal stoves will decrease gradually and fuelwood use will disappear. Saturation rates for refrigerators and colour television sets were very high and air conditioners were common in Bangkok. Some users may be unaware of the benefits of LPG as a cooking fuel. To improve indoor air quality and cooking safety and reduce pressures on forests from commercial fuelwood use, measures to promote LPG should be undertaken. The government should also provide information about efficient appliances and electricity conservation. (Author)

Household food waste

NARCIS (Netherlands)

Wahlen, S.; Winkel, Thomas

2017-01-01

Food waste is debated not only in the light of sustainable consumption in research and policy, but also in the broader public. This article focuses on food waste in household contexts, what is widely believed the end of the food chain. However, household food waste is far more complex and intricate

Meeting the EU recycling targets by introducing a 2-compartment bin to households

DEFF Research Database (Denmark)

Jensen, Morten Bang; Scheutz, Charlotte; Møller, Jacob

A Danish municipality has introduced a 2-compartment bin in the waste collection scheme, this bin should increase recycling of dry household recyclables. An excessive waste sorting campaign was conducted and the efficiency of the bin assessed. The waste sorting campaign yielded a full waste...... targets can be fulfilled, there is still room for improvement (increase source separation), especially for hard plastic and metals....

Anthropometric evaluations and assessment of school furniture design in Nigeria: A case study of secondary schools in rural area of Odeda, Nigeria

Directory of Open Access Journals (Sweden)

Adekunle Ibrahim Musa

2011-01-01

Full Text Available This study was carried out on 621 schoolboys with age range of 12-17 years in Junior and Senior Secondary Schools in Odeda area of Odeda local government in Ogun State, Nigeria. Different anthropometric data were collected from these boys. It was observed from the results that all anthropometric dimensions of the school children increase with their age. Moreover, there exists a little difference between mean values of different anthropometric dimensions between the boys of 12-13 years (2.9% to 8.8%, 14-15 years (1.3% to 9.9%, and 16-17 years (1.4% to 5.5%. But the said differences become much higher (16.2% to 42.4% when the same were compared between the children of 12 years and 17 years. Therefore, it can be said that the design of furniture for the children of 12 years will not match the children of 17 years. If single furniture is designed by considering dimensions of the children from 12 years to 17years, it will also not suit the children of all age groups. Therefore, in the present investigation, all the students have been divided into three combined age groups, e.g., 12-13 years, 14-15 years, and 16-17 years, and the percentile values (5th, 50th and 95th of anthropometric measures, which will be helpful for designing of the classroom furniture.

40 CFR 52.478 - Rules and Regulations.

Science.gov (United States)

2010-07-01

... truck manufacturing; (2) Coating of cans, coils, paper, fabric and vinyl, metal furniture, large... batch processes in the synthetic organic chemical manufacturing industry; (7) Volatile organic storage; (8) Wood furniture coatings; (9) Offset lithography; (10) Clean-up solvents. [64 FR 57781, Oct. 27...

INVESTIGATION OF THE EFFECTS OF DIFFERENT EDGE JOINT ELEMENTS ON DIAGONAL TENSILE STRENGTH IN FURNITURE EDGE JOINTS

Directory of Open Access Journals (Sweden)

Arif GÜRAY

2002-01-01

Full Text Available In this work, the diagonal tensile strength of furniture edge joints such as wooden dowel, minifix, and alyan screw was investigated in panel-constructed boards for Suntalam and MDF Lam. For this purpose, a diagonal tensile strength test was applied to the 72 samples. According to the results, the maximum diagonal tensile strength was found to be in MDF Lam boards that jointed with alyan screw.

Pengaruh Jumlah Tenaga Kerja, Bahan Baku, dan Teknologi terhadap Produksi Industri Furniture di Kota Denpasar

OpenAIRE

Natha, Ketut Suardikha; Prianata, Rahadian

2014-01-01

The development of a regional development is a process to raise the level of welfare of society. Another reason why the economic growth and development is undertaken is to be able to stimulate sectors of the economy that is growing, one of which is the industrial sector. The industrial sector is one of the few other sectors are growing rapidly in the area of ??Denpasar. One industry that is growing and is now pretty much in demand is the furniture industry. This research was conducted in the ...

How do household characteristics affect appliance usage? Application of conditional demand analysis to Japanese household data

International Nuclear Information System (INIS)

Matsumoto, Shigeru

2016-01-01

Although both appliance ownership and usage patterns determine residential electricity consumption, it is less known how households actually use their appliances. In this study, we conduct conditional demand analyses to break down total household electricity consumption into a set of demand functions for electricity usage, across 12 appliance categories. We then examine how the socioeconomic characteristics of the households explain their appliance usage. Analysis of micro-level data from the Nation Survey of Family and Expenditure in Japan reveals that the family and income structure of households affect appliance usage. Specifically, we find that the presence of teenagers increases both air conditioner and dishwasher use, labor income and nonlabor income affect microwave usage in different ways, air conditioner usage decreases as the wife's income increases, and microwave usage decreases as the husband's income increases. Furthermore, we find that households use more electricity with new personal computers than old ones; this implies that the replacement of old personal computers increases electricity consumption. - Highlights: •We conduct conditional demand analyses to study household appliance usage. •Micro-level data from the National Survey of Family and Expenditure in Japan are analyzed. •We show how household characteristics determine appliance usage. •High-income households use specific appliances less intensively than low-income households. •The replacement of old TVs and PCs lead to greater electricity consumption.

Chemical composition of material fractions in Danish household waste

DEFF Research Database (Denmark)

Riber, Christian; Petersen, Claus; Christensen, Thomas Højlund

2009-01-01

batches of 80-1200 tonnes of unsorted household waste was incinerated and the content of the waste determined from the content of the outputs from the incinerator. The indirect method is believed to better represent the small but highly contaminated material fractions (e,g., batteries) than the direct...... like paper, cardboard anti organic fractions. The single fraction contributing most to the total energy content is the non-recyclable plastic fraction, contributing 21% of the energy content and 60% of the chlorine content, although this fraction comprises less than 7% by weight. Heavy metals originate...... mainly from inert fractions, primarily batteries....

Utilization of household organic compost in zinc adsorption system

Science.gov (United States)

Cundari, Lia; Isvaringga, Nyiayu Dita; Arinda, Yesica Maharani

2017-11-01

Zinc (Zn) is one of the heavy metals which is polluted to the environment in an amount greater than 15 mg/L [1]. Zinc contamination caused by the disposal of industrial waste such as batteries, electroplating, paint and other industries. One of the Zinc recovery technique that is relatively inexpensive, simple, high effectiveness and efficiency, and can be regenerated is adsorption using compost. This study has been carried out the preparation of compost from organic household waste and cow manure and its application to Zinc recovery. In this research, the raw material of compost is varied. There is an organic household waste (A1) and a mixture of organic household waste and cow manure with ratio 7:6 (A2). Decomposition of A1 and A2 with addition Effective Microorganism (EM4) requires 21 days, with 3 times inversion. Zinc adsorption is done by using a compost variation of 0.5 g, 1 g, and 2 g in every 100 and 200 mg/L Zn concentration solution. The batch process is applied to analyze the capacity of adsorption. Determination of capacity of adsorption based on the Langmuir, Freundlich, and Temkin isotherm model. Direct observation and spectrophotometry are applied in research methodology. The results show that compost A1 and A2 have fulfilled Indonesian Standart of compost and have the ability to reduce Zinc concentration to 94-96%. It indicates highly recommended biosorbent that can be applied to Zinc adsorption.

Household vehicles energy consumption 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

Household Vehicles Energy Consumption 1994 reports on the results of the 1994 Residential Transportation Energy Consumption Survey (RTECS). The RTECS is a national sample survey that has been conducted every 3 years since 1985. For the 1994 survey, more than 3,000 households that own or use some 6,000 vehicles provided information to describe vehicle stock, vehicle-miles traveled, energy end-use consumption, and energy expenditures for personal vehicles. The survey results represent the characteristics of the 84.9 million households that used or had access to vehicles in 1994 nationwide. (An additional 12 million households neither owned or had access to vehicles during the survey year.) To be included in then RTECS survey, vehicles must be either owned or used by household members on a regular basis for personal transportation, or owned by a company rather than a household, but kept at home, regularly available for the use of household members. Most vehicles included in the RTECS are classified as {open_quotes}light-duty vehicles{close_quotes} (weighing less than 8,500 pounds). However, the RTECS also includes a very small number of {open_quotes}other{close_quotes} vehicles, such as motor homes and larger trucks that are available for personal use.

The Furniture Industry In Londrina A Indústria de Móveis em Londrina

Directory of Open Access Journals (Sweden)

Marcia Regina Gabardo da Câmara

2004-11-01

Full Text Available The Brazilian furniture industry is organized in clusters. Cluster is an agglomerate of located companies in a certain area that you/they develop their activities in an articulate way and with a logic in common and whose dynamics depends on the fact that those companies accomplish similar activities, use specific labor and raw materials, etc. inducing interaction and synergy, due to articulated performance, they provide to the group of companies competitive advantages that are reflected in an differentiated performance. The companies agglomerated geographically, mainly SMEs - small and medium enterprises - present success - greater competitiveness, generation of jobs, technological innovations, etc. In the area of Londrina - PR, there is a geographical agglomerate of companies producing of pieces of furniture, with prominence for the residential pieces of furniture and of office. The study tried to identify if the geographical gathering of furniture companies in the area corresponds or not to a cluster. A great potential was verified for the development of the same, due to the proximity with customers and suppliers and in relation to the available infrastructure of services. However, any form of cooperative action was not verified among companies or enter companies to develop complementary activities, it was not also verified any institution or support association for the companies. It is concluded that in the area of Londrina, the cluster is incipient because in spite of the gathering of companies, due to the low vertical links and absence of horizontal and multilateral links that characterize more advanced clusters, the synergetic effects of the gathering are not verified.A indústria moveleira brasileira está organizada em clusters. Cluster é um aglomerado de empresas localizadas em uma determinada região que desenvolvem suas atividades de forma articulada e com uma lógica em comum e cuja dinâmica pode ser determinada pelo fato dessas

Rural Households

DEFF Research Database (Denmark)

Bruun, Ole

2013-01-01

dependency on state institutions under the Vietnamese transition to a market society. It discusses present poverty definitions and measures by comparing survey data with the formal economic categorization of rural households. Both the overall characteristics of rural society and qualitative data indicate...... that the reforms have set in motion a process by which a mix of new opportunities and increasing pressures creates new winners and losers. Second, the chapter draws attention to the nature of interactions between households, local communities and the Vietnamese state. This shows both potentials and limitations...

Environmental performance of household waste management in Europe - An example of 7 countries.

Science.gov (United States)

Andreasi Bassi, Susanna; Christensen, Thomas H; Damgaard, Anders

2017-11-01

An attributional life cycle assessment (LCA) of the management of 1ton of household waste was conducted in accordance with ISO 14044:2006 and the ILCD Handbook for seven European countries, namely Germany, Denmark, France, UK, Italy, Poland and Greece, representing different household waste compositions, waste management practices, technologies, and energy systems. National data were collected from a range of sources regarding household waste composition, household sorting efficiency, collection, waste treatments, recycling, electricity and heat composition, and technological efficiencies. The objective was to quantify the environmental performance in the different countries, in order to analyze the sources of the main environmental impacts and national differences which affect the results. In most of the seven countries, household waste management provides environmental benefits when considering the benefits of recycling of materials and recovering and utilization of energy. Environmental benefits come from paper recycling and, to a lesser extent, the recycling of metals and glass. Waste-to-energy plants can lead to an environmental load (as in France) or a saving (Germany and Denmark), depending mainly on the composition of the energy being substituted. Sensitivity analysis and a data quality assessment identified a range of critical parameters, suggesting from where better data should be obtained. The study concluded that household waste management is environmentally the best in European countries with a minimum reliance on landfilling, also induced by the implementation of the Waste Hierarchy, though environmental performance does not correlate clearly with the rate of material recycling. From an environmental point of view, this calls for a change in the waste management paradigm, with less focus on where the waste is routed and more of a focus on the quality and utilization of recovered materials and energy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Household Consumption, Investment and Life Insurance

DEFF Research Database (Denmark)

Bruhn, Kenneth; Steffensen, Mogens

2011-01-01

This paper develops a continuous-time Markov model for utility optimization of households. The household optimizes expected future utility from consumption by controlling consumption, investments and purchase of lifeinsurance for each person in the household. The optimal controls are investigated...... in the special case of a two-person household, and we present graphics illustrating how differences between the two persons affect the controls....

Under-reported income of Russian households

Directory of Open Access Journals (Sweden)

Yaroslav Murashov

2016-03-01

Full Text Available In the proposed paper, an attempt is made to estimate the proportion of unstated income for Russian households based on micro data. An overview of microeconomic approaches to estimating the scale of under-reported income is provided. These approaches are weakly represented in the national literature, so their strengths and weaknesses are also analyzed. A theoretical model of household consumer behavior is described that allows the size of under-reported income to be estimated. The structure of household incomes and expenditures is studied based on an RLMS sample for 2012. The model is estimated using household subsamples based on the type of household and household income. The estimation technique utilizes regression variables and random effects. The resulting subsample estimates were applied to the general population and compared with those obtained by other researchers using alternative methods and other data. A comparison is made to estimates of under-reported income developed for British households.

Technical changes and the rate of profit in the Canadian wood, furniture, and paper industries

OpenAIRE

M Webber; S Tonkin

1988-01-01

In this paper the rate of profit is examined and the components of changes in the rate of profit are identified in the wood, furniture, and paper industries of Canada for the years 1952 to 1981. The rate of profit in the wood industry generally rose, until a dramatic fall since 1979 onwards; this fall was largely due to a collapse of market prices and to the effects of that collapse on the technical composition of capital (via changes in the rate of capacity utilization). Profit rates in the ...

Essays in Household Finance

DEFF Research Database (Denmark)

Hanspal, Tobin

This Ph.D. thesis, entitled Essays in Household Finance, analyzes the determinants and implications of investment biases, personal experiences in financial markets, and financing disruptions on households, individual investors, and entrepreneurs and small business owners. The first essay...... on risk taking is the potential bias resulting from inertia and inattention, which has been shown to be endemic in household finance. If individuals are inert or inattentive, it is difficult to establish whether changes in risk taking are caused by personal experiences or whether the change in risk taking...

Atmospheric trace metal concentrations in Suspended Particulate ...

African Journals Online (AJOL)

The air particulate samples were collected from the kitchens, living rooms and outdoor environment of five households in the community. The quantification of the trace metals was done using Atomic Absorption spectrometry method, employing HNO based wet digestion. High baseline concentration of SPMwere obtained ...

Recent trend in family households in Beijing.

Science.gov (United States)

Guo, Z; Guo, L

1997-01-01

This study examined trends in household size and age structure in Beijing, China, in 1995. Data were reliably obtained from the 1% sample survey of China. Findings indicate that the average size of a family household was 3.15 persons, that is, 0.050 persons fewer than the 3.20 from the 1990 Census. Children aged 0-14 years in each household averaged 0.04 fewer children during 1990-95. 80% of the decline in household size was due to decreases in the number of children. The percentage of single-family and single-person households declined. Three-person households were the only size group that increased (23.2-40.7%). The household headship (HH) rate for males increased dramatically between the ages of 20 and 30 years and stabilized after 35 years. The HH rate for women grew slowly and continuously until age 50 years and then stabilized. The gender gap in HH appeared at an early age and remained thereafter. The HH rate declined at older ages. The HH rate in Beijing, compared to the national rate, suggests relative gender equity in Beijing. As a child ages, the percentage of three-generation households declines and the percentage of two-generation households rises. As a child becomes an adult, the percentages of single-person households and single-couple households increase. Single-couple households decreased among the middle-aged. 67.4% of the elderly lived in two- or three-generation households. 31.4% of elderly lived in single-person/couple households. The percentage of elderly living with their children declined by 2 points during 1990-95.

Guided exploration of physically valid shapes for furniture design

KAUST Repository

Umetani, Nobuyuki

2012-07-01

Geometric modeling and the physical validity of shapes are traditionally considered independently. This makes creating aesthetically pleasing yet physically valid models challenging. We propose an interactive design framework for efficient and intuitive exploration of geometrically and physically valid shapes. During any geometric editing operation, the proposed system continuously visualizes the valid range of the parameter being edited. When one or more constraints are violated after an operation, the system generates multiple suggestions involving both discrete and continuous changes to restore validity. Each suggestion also comes with an editing mode that simultaneously adjusts multiple parameters in a coordinated way to maintain validity. Thus, while the user focuses on the aesthetic aspects of the design, our computational design framework helps to achieve physical realizability by providing active guidance to the user. We demonstrate our framework on plankbased furniture design with nail-joint and frictional constraints. We use our system to design a range of examples, conduct a user study, and also fabricate a physical prototype to test the validity and usefulness of the system. © 2012 ACM 0730-0301/2012/08- ART86.

77 FR 64510 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Science.gov (United States)

2012-10-22

... Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for Metal Furniture Surface... Furniture Surface Coating (Renewal). ICR Numbers: EPA ICR Number 1952.05, OMB Control Number 2060-0518. ICR... instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting...

77 FR 64512 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Science.gov (United States)

2012-10-22

... Activities; Submission to OMB for Review and Approval; Comment Request; NSPS for Metal Furniture Coating... Furniture Coating (40 CFR Part 60, Subpart EE) (Renewal) ICR Numbers: EPA ICR Number 0649.11, OMB Control... needed to review instructions; develop, acquire, install, and utilize technology and systems for the...

Comparative Analysis of Households' Socioeconomic and ...

African Journals Online (AJOL)

This study analysed the socioeconomic and demographic characteristics of ... In order to improve households' food security status in both rural and urban areas, ... as reduction in household size through birth control, and increase in household ...

Effective Indices in Site Selection of Furniture Industry from Point of View of Suppliers in North Khorasan Province: Application of AHP Method

Directory of Open Access Journals (Sweden)

Ali Darijani

2012-01-01

Full Text Available Adequate conducting studies on site selection will have economic impact on performance of industrial firm; besides the effects of social, environmental, cultural and economic in their area. Also, the regional characteristics as key factors in determining where to locate the problem is that it creates incentives for public, private and cooperative sectors for investing on that place. Determining the effective indices in furniture industry to set sellers' view is the aim of this study that conducted in North Khorasan province, Iran in 2010. After reviewing literatures and interviews, the effecting factors were identified and classified into five main groups; "materials and products", "infrastructure", "mortal", "economic" and "rules and regulations". Value of weighted indices determined by getting comments from experienced furniture sellers as well as using Analytical Hierarchy Process (AHP applied and flexible technique by Expert Choice software. The results showed that materials, distance to market, existing invertors indices with value-weighted 0.126, 0.114 and 0.099, respectively had highest priority.

Household energy transition in Hong Kong

Energy Technology Data Exchange (ETDEWEB)

Hills, Peter (Hong Kong Univ. (Hong Kong). Centre of Urban Planning and Environmental Management)

1994-05-01

A household energy survey in Hong Kong confirmed that domestic energy consumption is dominated by modern fuels. Household spending on fuels typically amounts to less than 3% of monthly income. Delivered energy use per household per month averages 1.77 GJ and per capita use 0.37 GJ. Electricity accounts for more than half of fuel expenditure and energy use. Patterns of fuel choice and use are quite consistent across income levels, although electricity use rises with higher household incomes. Many households use a combination of kerosene, gas and electricity (rice cookers) for cooking, which appears to reflect culinary practices more than fuel prices, perceived safety or availability. Electrical appliance saturation is high already, and air conditioning use is growing rapidly. Household electricity consumption may increase substantially during the 1990s as higher comfort levels lead to increased heating and cooling demand and space standards in public housing units improve. (Author)

Assessment of occupational exposure to wood dust in the Polish furniture industry

Directory of Open Access Journals (Sweden)

Małgorzata Szewczyńska

2017-02-01

Full Text Available Background: Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Material and Methods: Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Results: Total dust concentrations were 0.84–13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34–22.13 mg/m3. Respirable fraction concentrations were 0.38–4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. Conclusions: The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1:45–60

[Assessment of occupational exposure to wood dust in the Polish furniture industry].

Science.gov (United States)

Szewczyńska, Małgorzata; Pośniak, Małgorzata

2017-02-28

Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Essays in household finance

NARCIS (Netherlands)

Djordjevic, Ljubica

2015-01-01

Household finance is a young and vibrant research field that continuously attracts public attention. There may be very few matters that people care so much about as their personal finance. Recent rise of academic interest in household finance is to a great extent due to households’ more active role

Household consumption and environment. 2011 edition

International Nuclear Information System (INIS)

2011-01-01

This report presents and comments numerous data and indicators concerning the constraints and impacts on the environment related to household consumption and behaviour. After a presentation of context indicators (household number and size, household consumption expenses) and of some global indicators (water and carbon footprint of household consumption), several specific aspects are addressed: housing (electric and electronic equipment, water, space and energy consumption, renewable energies, CO 2 emissions), transport (general statistics on travels, CO 2 and pollutant emissions related to motor cars), food (water print and carbon print related to household food, consumption of bio-agriculture products and of conditioned beverages), and wastes (production and composition, electronic and electric equipment wastes, waste treatment)

Influence of household demographic and socio-economic factors on household expenditure on tobacco in six New Independent States

Directory of Open Access Journals (Sweden)

Gotsadze George

2007-08-01

Full Text Available Abstract Background To identify demographic and socio-economic factors that are associated with household expenditure on tobacco in Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Russian Federation, and Tajikistan. Methods Secondary analysis of the data available through the World Bank Living Standards Monitoring Survey conducted in aforementioned countries in 1995–2000. The role of different variables (e.g. mean age of household members, household area of residence, household size, share of adult males, share of members with high education in determining household expenditure on tobacco (defined as tobacco expenditure share out of total monthly HH consumption was assessed by using multiple regression analysis. Results Significant differences were found between mean expenditure on tobacco between rich and poor – in absolute terms the rich spend significantly more compared with the poor. Poor households devote significantly higher shares of their monthly HH consumption for tobacco products. Shares of adult males were significantly associated with the share of household consumption devoted for tobacco. There was a significant negative association between shares of persons with tertiary education within the HH and shares of monthly household consumption devoted for tobacco products. The correlation between household expenditures on tobacco and alcohol was found to be positive, rather weak, but statistically significant. Conclusion Given the high levels of poverty and high rates of smoking in the New Independent States, these findings have important policy implications. They indicate that the impact and opportunity costs of smoking on household finances are more significant for the poor than for the rich. Any reductions in smoking prevalence within poor households could have a positive economic impact.

5 CFR 2634.305 - Liabilities.

Science.gov (United States)

2010-01-01

... Administrative Personnel OFFICE OF GOVERNMENT ETHICS GOVERNMENT ETHICS EXECUTIVE BRANCH FINANCIAL DISCLOSURE... vehicle, household furniture, or appliances, provided that the loan does not exceed the purchase price of...,000, secured by family automobile purchased for $16,200. 6. Loan balance of $10,500, secured by...

Prediction of Composition and Emission Characteristics of Articles in Support of Exposure Assessment

Science.gov (United States)

The risk to humans from chemicals in consumer products is dependent on both hazard and exposure. The prediction and quantification of near-field (i.e., indoor) chemical exposure from household articles such as furniture and building materials is an ongoing effort. As opposed to (...

40 CFR 63.4881 - Am I subject to this subpart?

Science.gov (United States)

2010-07-01

... themselves: household, office, institutional, laboratory, hospital, public building, restaurant, barber and... conducted in an operation that is subject to the wood furniture manufacturing NESHAP in subpart JJ of this... janitorial, building, and facility maintenance operations. (4) Surface coating of only small items such as...

EPHECT I: European household survey on domestic use of consumer products and development of worst-case scenarios for daily use.

Science.gov (United States)

Dimitroulopoulou, C; Lucica, E; Johnson, A; Ashmore, M R; Sakellaris, I; Stranger, M; Goelen, E

2015-12-01

Consumer products are frequently and regularly used in the domestic environment. Realistic estimates for product use are required for exposure modelling and health risk assessment. This paper provides significant data that can be used as input for such modelling studies. A European survey was conducted, within the framework of the DG Sanco-funded EPHECT project, on the household use of 15 consumer products. These products are all-purpose cleaners, kitchen cleaners, floor cleaners, glass and window cleaners, bathroom cleaners, furniture and floor polish products, combustible air fresheners, spray air fresheners, electric air fresheners, passive air fresheners, coating products for leather and textiles, hair styling products, spray deodorants and perfumes. The analysis of the results from the household survey (1st phase) focused on identifying consumer behaviour patterns (selection criteria, frequency of use, quantities, period of use and ventilation conditions during product use). This can provide valuable input to modelling studies, as this information is not reported in the open literature. The above results were further analysed (2nd phase), to provide the basis for the development of 'most representative worst-case scenarios' regarding the use of the 15 products by home-based population groups (housekeepers and retired people), in four geographical regions in Europe. These scenarios will be used for the exposure and health risk assessment within the EPHECT project. To the best of our knowledge, it is the first time that daily worst-case scenarios are presented in the scientific published literature concerning the use of a wide range of 15 consumer products across Europe. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Sewage sludge pyrolysis - the distribution of heavy metals

Energy Technology Data Exchange (ETDEWEB)

Kistler, R.; Widmer, F.; Brunner, P.

1986-01-01

The paper informs about the heavy metal contents of sewage sludges and discusses the origin of household, industry and surface sewerage of the respective heavy metals. The study aimed at assessing whether and in how far heavy metal volatility may be checked by reducing the temperature during sewage sludge pyrolysis. The testing equipment used was made of glass/silica glass. Instead of in particles heavy metals were precipitated in the gaseous state. Except from mercury heavy metals are retained by the ashes up to temperatures from 450 to 555/sup 0/C. Due to the persistence of mercury care should be taken to keep the sewerage clear of it from the very beginning. Emissions caused by reactor materials can be avoided by choosing appropriate pyrolysis reactors.

[Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

Science.gov (United States)

Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

2008-01-01

In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

7 CFR 273.1 - Household concept.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Household concept. 273.1 Section 273.1 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE FOOD STAMP AND FOOD DISTRIBUTION PROGRAM CERTIFICATION OF ELIGIBLE HOUSEHOLDS § 273.1 Household concept...

Advanced oxidation-based treatment of furniture industry wastewater.

Science.gov (United States)

Tichonovas, Martynas; Krugly, Edvinas; Grybauskas, Arturas; Jankūnaitė, Dalia; Račys, Viktoras; Martuzevičius, Dainius

2017-07-16

The paper presents a study on the treatment of the furniture industry wastewater in a bench scale advanced oxidation reactor. The researched technology utilized a simultaneous application of ozone, ultraviolet radiation and surface-immobilized TiO 2 nanoparticle catalyst. Various combinations of processes were tested, including photolysis, photocatalysis, ozonation, catalytic ozonation, photolytic ozonation and photocatalytic ozonation were tested against the efficiency of degradation. The efficiency of the processes was primarily characterized by the total organic carbon (TOC) analysis, indicating the remaining organic material in the wastewater after the treatment, while the toxicity changes in wastewater were researched by Daphnia magna toxicity tests. Photocatalytic ozonation was confirmed as the most effective combination of processes (99.3% of TOC reduction during 180 min of treatment), also being the most energy efficient (4.49-7.83 MJ/g). Photocatalytic ozonation and photolytic ozonation remained efficient across a wide range of pH (3-9), but the pH was an important factor in photocatalysis. The toxicity of wastewater depended on the duration of the treatment: half treated water was highly toxic, while fully treated water did not possess any toxicity. Our results indicate that photocatalytic ozonation has a high potential for the upscaling and application in industrial settings.

Household demographic determinants of Ebola epidemic risk.

Science.gov (United States)

Adams, Ben

2016-03-07

A salient characteristic of Ebola, and some other infectious diseases such as Tuberculosis, is intense transmission among small groups of cohabitants and relatively limited indiscriminate transmission in the wider population. Here we consider a mathematical model for an Ebola epidemic in a population structured into households of equal size. We show that household size, a fundamental demographic unit, is a critical factor that determines the vulnerability of a community to epidemics, and the effort required to control them. Our analysis is based on the household reproduction number, but we also consider the basic reproduction number, intrinsic growth rate and final epidemic size. We show that, when other epidemiological parameters are kept the same, all of these quantifications of epidemic growth and size are increased by larger households and more intense within-household transmission. We go on to model epidemic control by case detection and isolation followed by household quarantine. We show that, if household quarantine is ineffective, the critical probability with which cases must be detected to halt an epidemic increases significantly with each increment in household size and may be a very challenging target for communities composed of large households. Effective quarantine may, however, mitigate the detrimental impact of large household sizes. We conclude that communities composed of large households are fundamentally more vulnerable to epidemics of infectious diseases primarily transmitted by close contact, and any assessment of control strategies for these epidemics should take into account the demographic structure of the population. Copyright © 2015 Elsevier Ltd. All rights reserved.

Current status of circularity for aluminum from household waste in Austria.

Science.gov (United States)

Warrings, R; Fellner, J

2018-02-20

Aluminum (Al) represents the metal with the highest consumption growth in the last few decades. Beside its increasing usage in the transport (lightweight construction of vehicles) and building sector, Al is used ever more frequently for household goods like packaging material, which represents a readily available source for secondary aluminum due to its short lifetime. The present paper investigates the extent to which this potential source for recycling of Al is already utilized in Austria and highlights areas for future improvements. Thereto a detailed material flow analysis for Al used in packaging & household non-packaging in 2013 was conducted. In practice, all Al flows starting from market entrance through waste collection and processing until its final recycling or disposal have been investigated. The results indicate that about 25,100 t/a (2.96 kg/cap/a) of Al packaging & household non-packaging arose as waste. At present about 9800 t/a, or 39%, are recycled as secondary Al, of which 26% is regained from separate collection and sorting, 8% from bottom ash and 5% from mechanical treatment. The type of Al packaging & household non-packaging affects the recycling rate: 82% of the total recycled quantities come from rigid packaging & household non-packaging, while only 3% of the total recycled Al derives from flexible materials. A significant amount of Al was lost during thermal waste treatment due to oxidation (10%) and insufficient recovery of Al from both waste incineration bottom ash and municipal solid waste treated in mechanical biological treatment plants (49%). Overall it can be concluded that once Al ends up in commingled waste the recovery of Al becomes less likely and its material quality is reduced. Although Austria can refer to a highly developed recycling system, the Austrian packaging industry, collection and recovery systems and waste management need to increase their efforts to comply with future recycling targets. Copyright © 2018

THE IMPACT OF CREDIT AND CAPITAL SUPPORTS ON ECONOMIC BEHAVIOR OF FARM HOUSEHOLDS: A HOUSEHOLD ECONOMIC APPROACH

Directory of Open Access Journals (Sweden)

Bernardus Bala de Rosari

2014-07-01

Full Text Available This research aimed at analysing the demand and allocation of credit and capital supports by farm household and impact on production, consumption, and investment. The research was conducted in East Nusa Tenggara Timur (ENT Province, one of targeted region of credit and capital supports policy of the government. Data collection was conducted from April to June 2013 by sampling for 178 households of farmers in Kupang District and Timor Tengah Selatan (TTS District. The result of this research showed that the allocation of credit and capital supports caused increaseof cattle production, consumption expenditure, and investment. The usage of credit and capital supports was depend on economical situation of the household itself. The decision of farm household on using credit and capital supports had impact on overall economical behavior of household, i.e. production, consumption and investment behavior. The transmission use was reciprocally interacted. Finally, the policy of credit and capital supports scheme for farmers should be adjusted with the context of farm household economics.

Characterization of household waste in Greenland

International Nuclear Information System (INIS)

Eisted, Rasmus; Christensen, Thomas H.

2011-01-01

The composition of household waste in Greenland was investigated for the first time. About 2 tonnes of household waste was sampled as every 7th bag collected during 1 week along the scheduled collection routes in Sisimiut, the second largest town in Greenland with about 5400 inhabitants. The collection bags were sorted manually into 10 material fractions. The household waste composition consisted primarily of biowaste (43%) and the combustible fraction (30%), including anything combustible that did not belong to other clean fractions as paper, cardboard and plastic. Paper (8%) (dominated by magazine type paper) and glass (7%) were other important material fractions of the household waste. The remaining approximately 10% constituted of steel (1.5%), aluminum (0.5%), plastic (2.4%), wood (1.0%), non-combustible waste (1.8%) and household hazardous waste (1.2%). The high content of biowaste and the low content of paper make Greenlandic waste much different from Danish household waste. The moisture content, calorific value and chemical composition (55 elements, of which 22 were below detection limits) were determined for each material fraction. These characteristics were similar to what has been found for material fractions in Danish household waste. The chemical composition and the calorific value of the plastic fraction revealed that this fraction was not clean but contained a lot of biowaste. The established waste composition is useful in assessing alternative waste management schemes for household waste in Greenland.

Sistemas de información geográfica para evaluar la disponibilidad de puntos limpios en la provincia de Castellón

OpenAIRE

Moliner Santisteve, Enrique; Muñoz Marzá, Carlos; Garraín Cordero, Daniel; Vidal, Rosario

2010-01-01

Ponencia presentada en el XIV Congreso Internacional de Ingeniería de Proyectos celebrado en Madrid, 30 de junio, 1 y 2 de julio de 2010 The civic amenity sites are facilities for selective collection where citizens have to remove those special domestic wastes that require to be managed apart from other household waste (furniture, rubble, electrical appliances, household oils, etc.). The availability of civic amenity sites is usually limited to the most populated regions, while sm...

Household energy consumption and expenditures, 1990

International Nuclear Information System (INIS)

1993-01-01

This report, Household Energy Consumption and Expenditures 1990, is based upon data from the 1990 Residential Energy Consumption Survey (RECS). Focusing on energy end-use consumption and expenditures of households, the 1990 RECS is the eighth in a series conducted since 1978 by the Energy Information Administration (EIA). Over 5,000 households were surveyed, providing information on their housing units, housing characteristics, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information provided represents the characteristics and energy consumption of 94 million households nationwide

Determinants of Household Food Security in Urban Areas

Directory of Open Access Journals (Sweden)

Sarah Ayu Mutiah

2017-03-01

Full Text Available Food security at household level is a very important precondition to foster the national and regional food security. Many people migrate to urban areas in the hope of improving their welfare. Generally people think that in the city there are more opportunities, but the opposite is true. The problem is more complex in the city especially for people who do not have adequate skills and education. This study aims to address whether  age of household head, household size, education level of household head, income, and distribution of subsidized rice policy affect the food security of urban poor households in Purbalingga district. A hundred respondents were selected from four top villages in urban areas of Purbalingga with the highest level of poverty. Using binary logistic regression, this study finds significant positive effect of education of household head and household income and significant negative effect of household size and raskin on household food security, while age of household head has no significant effect on household food security. The results imply the need for increased awareness of family planning, education, improved skills, and increased control of the implementation of subsidized rice for the poor.

9708 INTRAHOUSEHOLD ALLOCATION, HOUSEHOLD HEADSHIP ...

African Journals Online (AJOL)

Mimi

agricultural production, education, healthcare and other household needs [17]. ... to various assets within the household depends on age, gender and power ..... Omilola B Patterns and Trends of Child and Maternal Nutrition Inequalities in.

UK Household Portfolios

OpenAIRE

Banks, James; Smith, Sarah

2000-01-01

This paper presents a detailed analysis of the composition of household portfolios, using both aggregate and micro-data. Among the key findings are that: Most household wealth is held in the form of housing and pensions. Over time, there has been a shift away from housing towards financial assets, driven largely by the growth in life and pension funds. Liquid financial wealth (excluding life and pension funds) is not predominantly held in risky form. By far the most commonly held asset is an ...

The household energy transition in India and China

International Nuclear Information System (INIS)

Pachauri, Shonali; Jiang, Leiwen

2008-01-01

Both India and China are countries in energy transition. This paper compares the household energy transitions in these nations through the analysis of both aggregate statistics and nationally representative household surveys. The two countries differ sharply in several respects. Residential energy consumption in China is twice that in India, in aggregate terms. In addition, Chinese households have almost universal access to electricity, while in India almost half of rural households and 10% of urban households still lack access. On aggregate, urban households in China also derive a larger share of their total energy from liquid fuels and grids (77%) as compared to urban Indian households (65%). Yet, at every income level, Indians derive a slightly larger fraction of their total household energy needs from liquid and grid sources of energy than Chinese with comparable incomes. Despite these differences, trends in energy use and the factors influencing a transition to modern energy in both nations are similar. Compared with rural households, urban households in both nations consume a disproportionately large share of commercial energy and are much further along in the transition to modern energy. However, total energy consumption in rural households exceeds that in urban households, because of a continued dependence on inefficient solid fuels, which contribute to over 85% of rural household energy needs in both countries. In addition to urbanisation, key drivers of the transition in both nations include income, energy prices, energy access and local fuel availability. (author)

The Determinants of Agricultural Productivity and Rural Household ...

African Journals Online (AJOL)

Rahel

Key Words: Labor productivity, Land productivity; Rural household income, Rural ... household labor ratio of rural household farmers, given fixed level of inputs ... because households are rarely practicing dominated by a subsistence.

Food waste from Danish households: Generation and composition

DEFF Research Database (Denmark)

Edjabou, Maklawe Essonanawe; Petersen, Claus; Scheutz, Charlotte

2016-01-01

Sustainable solutions for reducing food waste require a good understanding of food waste generation and composition, including avoidable and unavoidable food waste. We analysed 12 tonnes of residual household waste collected from 1474 households, without source segregation of organic waste. Food...... waste was divided into six fractions according to avoidability, suitability for home-composting and whether or not it was cooked, prepared or had been served within the household. The results showed that the residual household waste generation rate was 434 ± 18 kg per household per year, of which 183...... ± 10 kg per year was food waste. Unavoidable food waste amounted to 80 ± 6 kg per household per year, and avoidable food waste was 103 ± 9 kg per household per year. Food waste mass was influenced significantly by the number of occupants per household (household size) and the housing type. The results...

Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

DEFF Research Database (Denmark)

Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

2017-01-01

Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings....

Household composition and psychological health

DEFF Research Database (Denmark)

Joensen, Lene Eide; Willaing, Ingrid; Holt, Richard I G

2017-01-01

AIMS: 1) To explore the effect of household composition on the psychological health of adults with diabetes by comparing those living with other adult(s) including a partner with those living with neither partner nor other adult(s); 2) to examine potential mediation of social support...... in the association between household composition and psychological health. METHODS: The study is part of the DAWN2 study conducted in 17 countries. The population comprised 8596 people with diabetes (PWD). Multiple regression models (linear and binary) were applied. RESULTS: People living with 'other adult...... to the other household composition groups. The association between household composition and psychological health was not mediated by diabetes-specific social support. CONCLUSIONS: The study indicates the psychological vulnerability of respondents living without a partner but with other adult(s). Appropriate...

Information content of household-stratified epidemics

Directory of Open Access Journals (Sweden)

T.M. Kinyanjui

2016-09-01

Full Text Available Household structure is a key driver of many infectious diseases, as well as a natural target for interventions such as vaccination programs. Many theoretical and conceptual advances on household-stratified epidemic models are relatively recent, but have successfully managed to increase the applicability of such models to practical problems. To be of maximum realism and hence benefit, they require parameterisation from epidemiological data, and while household-stratified final size data has been the traditional source, increasingly time-series infection data from households are becoming available. This paper is concerned with the design of studies aimed at collecting time-series epidemic data in order to maximize the amount of information available to calibrate household models. A design decision involves a trade-off between the number of households to enrol and the sampling frequency. Two commonly used epidemiological study designs are considered: cross-sectional, where different households are sampled at every time point, and cohort, where the same households are followed over the course of the study period. The search for an optimal design uses Bayesian computationally intensive methods to explore the joint parameter-design space combined with the Shannon entropy of the posteriors to estimate the amount of information in each design. For the cross-sectional design, the amount of information increases with the sampling intensity, i.e., the designs with the highest number of time points have the most information. On the other hand, the cohort design often exhibits a trade-off between the number of households sampled and the intensity of follow-up. Our results broadly support the choices made in existing epidemiological data collection studies. Prospective problem-specific use of our computational methods can bring significant benefits in guiding future study designs.

Information content of household-stratified epidemics.

Science.gov (United States)

Kinyanjui, T M; Pellis, L; House, T

2016-09-01

Household structure is a key driver of many infectious diseases, as well as a natural target for interventions such as vaccination programs. Many theoretical and conceptual advances on household-stratified epidemic models are relatively recent, but have successfully managed to increase the applicability of such models to practical problems. To be of maximum realism and hence benefit, they require parameterisation from epidemiological data, and while household-stratified final size data has been the traditional source, increasingly time-series infection data from households are becoming available. This paper is concerned with the design of studies aimed at collecting time-series epidemic data in order to maximize the amount of information available to calibrate household models. A design decision involves a trade-off between the number of households to enrol and the sampling frequency. Two commonly used epidemiological study designs are considered: cross-sectional, where different households are sampled at every time point, and cohort, where the same households are followed over the course of the study period. The search for an optimal design uses Bayesian computationally intensive methods to explore the joint parameter-design space combined with the Shannon entropy of the posteriors to estimate the amount of information in each design. For the cross-sectional design, the amount of information increases with the sampling intensity, i.e., the designs with the highest number of time points have the most information. On the other hand, the cohort design often exhibits a trade-off between the number of households sampled and the intensity of follow-up. Our results broadly support the choices made in existing epidemiological data collection studies. Prospective problem-specific use of our computational methods can bring significant benefits in guiding future study designs. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Size of households and income disparities.

Science.gov (United States)

Kuznets, S

1981-01-01

The author examines "the relation between differentials in size of households, (preponderantly family households including one-person units) and disparities in income per household, per person, or per some version of consuming unit." The analysis is based on data for the United States, the Federal Republic of Germany, Israel, Taiwan, the Philippines, and Thailand. excerpt

ANALISIS PENGUKURAN PRODUKTIVITAS PADA CV. CITRA JEPARA FURNITURE

Directory of Open Access Journals (Sweden)

Darminto Pujotomo

2012-02-01

Full Text Available CV. Citra Jepara adalah perusahaan furnitur ekspor. Pada masa itu, perusahaan hanya melihat level keuntungan untuk mengkaji perusahaan telah berjalan lebih baik atau kebalikannya. Hasil persepsi membuat perusahaan hanya sedikit memperhatikan efisiensi pemakaian sumber daya yang dimiliki (input sehingga perusahaan membutuhkan biaya besar untuk melakukan aktivitas perusahaan.Penelitian ini mempelajari evaluasi produktivitas perusahaan dan pengukuran serta hubungan antara level produktivitas dengan level profitabilitas (kemampuan perusahaan untuk menciptakan laba yang dapat dicapai oleh perusahaan.Hasil penelitian ini tentang pengukuran produktivitas parsial memperlihatkan level produktivitas berubah-ubah dan masih memerlukan usaha peningkatan produktivitas parsial terutama dalam pemakaian masing-masing input dengan efisien. Level Total Factor Productivity selama perioda pengukuran memperlihatkan level pertumbuhan positif. Ini melukiskan perusahaan sukses dalam mengelola input tenaga kerja dan modal kolektif yang dimiliki. Level Total Productivity selama perioda pengukuran menunjukkan level pertumbuhan yang berubah-ubah. Ini melukiskan perusahaan itu belum dapat mengelola input yang dimiliki keseluruhan dengan sukses. Untuk melukiskan hubungan antara produktivitas total dengan profitabilitas dari hasil penelitian bisa diketahui faktor produktivitas (0,998 mempunyai pengaruh lebih besar dibandingkan pemulihan harga (0,457 untuk peningkatan profitabilitas perusahaan selama kurun waktu satu tahun perioda pengukuran. Diperlukan usaha untuk meningkatkan profitabilitas perusahaan untuk periode mendatang disertai usaha untuk meningkatkan produktivitas yang memusatkan pada peningkatan produktivitas material dan produktivitas modal sebagai input yang sangat mempengaruhi profitabilitas perusahaan dengan cara berkelanjutkan dan berkesinambungan. Kata kunci: pengukuran evaluasi dan produktivitas, profitabilitas    CV. Citra Jepara is an export furniture

Effects ok ikea's entry into a furniture production cluster

Directory of Open Access Journals (Sweden)

Vasco Eiriz

2016-04-01

Full Text Available The entry of a multinational into a cluster, a geographic agglomeration in a given place or region of predominantly small and medium enterprises specialized in a given industry or related industries, impacts the incumbent in the cluster. Aiming to identify the main effects of a multinational entry on the firms’ strategy in a cluster, it was analyzed the entry of IKEA, a Swedish multinational, into the cluster of furniture production in Paços de Ferreira and Paredes, in Portugal. In this study, the data collection technique to access primary data was a survey. The sample has small enterprises, which is similar to the structure of firms in the studied cluster. Results show that more than half the sample thinks that the entry of the multinational had not affected them. However, the firms that acknowledge a significant impact, assess that impact as negative. The competitiveness factors that have improved more significantly after IKEA’s entry were new product development and exporting strategies. The main responses of incumbent firms to the multinational entry were internationalization and the development of generic strategies of differentiation and focus based on differentiation.

Wood fuels consumption in households in Montenegro

Directory of Open Access Journals (Sweden)

Glavonjić Branko D.

2013-01-01

Full Text Available The paper presents the results of researching wood fuels consumption in households in Montenegro in the heating season 2011/2012. The research was conducted in the period October-November 2012 on the sample of 5% of the total number of households which stated to use solid fuels for heating purposes in the 2011 census. Results of the conducted researches on the presence and amounts of fuels consumed in households in Montenegro showed that total firewood consumption in the heating season 2011/2012 (both urban and rural households was 703,571 m3. Wood consumption is the lowest in the households in the municipalities in the coastal zone, it is somewhat higher in central zone and the highest in the zone on the north of Montenegro. Average wood consumption in households in the coastal zone municipalities is 3.79 m3, in the central zone it is 5.02 m3 and on the north of Montenegro it is 6.74 m3/household. Observed on the level of Montenegro, average firewood consumption per household was 5.49 m3 and as such it best represents relatively low consumption level in the coastal zone and high consumption level on the north of Montenegro. Compared to the neighboring countries, average firewood consumption per household in Montenegro in the amount of 5.49 m3 is significantly lower than the average consumption in Serbia which is 7.3 m3/household as well as in Slovenia in the amount of 6.5 m3.

Characterization of household waste in Greenland

DEFF Research Database (Denmark)

Eisted, Rasmus; Christensen, Thomas Højlund

2011-01-01

The composition of household waste in Greenland was investigated for the first time. About 2tonnes of household waste was sampled as every 7th bag collected during 1week along the scheduled collection routes in Sisimiut, the second largest town in Greenland with about 5400 inhabitants....... The collection bags were sorted manually into 10 material fractions. The household waste composition consisted primarily of biowaste (43%) and the combustible fraction (30%), including anything combustible that did not belong to other clean fractions as paper, cardboard and plastic. Paper (8%) (dominated...... by magazine type paper) and glass (7%) were other important material fractions of the household waste. The remaining approximately 10% constituted of steel (1.5%), aluminum (0.5%), plastic (2.4%), wood (1.0%), non-combustible waste (1.8%) and household hazardous waste (1.2%). The high content of biowaste...

Household pesticide usage in the United States.

Science.gov (United States)

Savage, E P; Keefe, T J; Wheeler, H W; Mounce, L; Helwic, L; Applehans, F; Goes, E; Goes, T; Mihlan, G; Rench, J; Taylor, D K

1981-01-01

A total of 10,000 U.S. households in 25 standard metropolitan statistical areas and 25 counties were included in the United States. More than 8,200 households granted an interview. Nine of every ten households in the United States used some types of pesticide in their house, garden, or yard. Households in the southeastern United States used the most pesticides. Although more than 500 different pesticide formulations were used by the sampled households, 15 pesticides accounted for 65.5% of all pesticides reported in this study. Thirteen of these 15 pesticides were insecticides, one was a herbicide, and one was a rodenticide.

Farm Households Food Production and Households' Food Security ...

African Journals Online (AJOL)

insecurity existed among households in the study areas based on the recommended average DEC/AE, of 2200 kcal and ... An International Journal of Basic and Applied Research. 41 ... population, for example, eating of less preferred foods.

Household food insecurity and child health.

Science.gov (United States)

Schmeer, Kammi K; Piperata, Barbara A

2017-04-01

Food insecurity, the lack of consistent access to sufficient quality and quantity of food, affects an estimated 800 million people around the world. Although household food insecurity is generally associated with poor child nutrition and health in the USA, we know less about household food insecurity and child health in developing countries. Particularly lacking is research assessing how associations between household food insecurity and children's health outcomes may differ by child age and among children beyond age 5 years in low-income settings. We use data from a population-based sample of households with children ages 3-11 years (N = 431) in León, Nicaragua to consider how household food insecurity is associated with three measures of child health: illness, anaemia and low height-for-age. Our results provide new evidence that even mild household food insecurity is detrimental to children's health; and that child age conditions the associations between household food insecurity and child health. We find that food insecurity is especially harmful to health during early childhood, but continues to have significant associations with health into middle childhood (up to ages 7-8 years). We discuss the potential implications of these results for future child health research and policies in low-income countries. © 2016 John Wiley & Sons Ltd. © 2016 John Wiley & Sons Ltd.

Determinants of Corporate Performance: A Study on Furniture Companies in Jepara Indonesia

Directory of Open Access Journals (Sweden)

Amron A.

2015-03-01

Full Text Available The aims of this research were to analyze corporate performance through learning orientation, leader’s characteristics, market orientation, and innovation in furniture industries in Jepara, Indonesia. The samples in this research were 110 small and medium enterprises. Based on SEM analysis results, the seven research hypothesis used were; (1 learning orientation has significant effect on corporate performance; (2 learning orientation has significant effect on innovation; (3 leader’s characteristics do not have significant effect on corporate performance; (4 leader’s characteristics have significant effect on innovation; (5 market orientation has significant effect on innovation; (6 market orientation has significant effect on corporate performance; (7 Innovation does not have significant effect on corporate performance. After the test and analysis, it was found that five out of the seven hypotheses were accepted and two out of them were rejected.

Car use within the household

DEFF Research Database (Denmark)

de Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

2013-01-01

In this paper we study the demand for car kilometres in two-car households, focusing on the substitution between cars in response to fuel price changes. We use a large sample of detailed Danish data on two-car households to estimate—for each car owned by the household—own and cross-price effects...... of increases in fuel costs per kilometre. The empirical results show that failure to capture substitution between cars within the household can result in substantial misspecification biases. Ignoring substitution, we estimate fuel price elasticities of –0.81 and -0.65 for the primary and secondary cars...... efficient car, finding partial support for the underlying hypothesis. More importantly, the results of this extended model emphasize the importance of behavioural differences related to the position of the most fuel efficient car in the household, suggesting that households’ fuel efficiency choices...

The study of postural workload in assembly of furniture upholstery

Directory of Open Access Journals (Sweden)

Marek Lasota Andrzej

2017-01-01

Full Text Available The productivity of the workers is affected by the Work-related Musculoskeletal Disorders (WRMSDs which common cause of health problems, sick leave and it can result in decreased quality of work and increased absenteeism. The objective of this study is to evaluate and investigate the postural workload of sewing machine operators in the assembly of upholstery in furniture factory by using the Ovako Working Posture Analysing System (OWAS with sampling. The results indicated that posture code 2111 (back code: 2 – bent forward; arms code: 1 – both below the shoulder joint; legs code: 1 – sitting position; load code: – 1 less than 10 kg was the most common working posture rating 38.1%; 63.9% of positions displayed non-neutral back postures and 52% received harmful action categories. The performed assembly tasks have an influence on harmless and harmful action categories. This study is crucial on assembly, and in the future work allows develop a framework for assessment the physical risk of WRMSDs in assembly.

Leaching of TCIPP from furniture foam is rapid and substantial.

Science.gov (United States)

Stubbings, William A; Harrad, Stuart

2018-02-01

A series of laboratory experiments were conducted, in which waste furniture polyurethane foam samples containing tris (1-chloro-2-propyl) phosphate (TCIPP) were contacted with a range of leaching fluids, formulated to simulate the composition of landfill leachate. Leaching was examined under a number of different scenarios, such as: dissolved humic matter concentration, pH, and temperature, as well as the effect of agitation, and waste:leaching fluid contact duration. In addition to single batch (no replenishment of leaching fluid), serial batch (draining of leachate and replenishment with fresh leaching fluid at various time intervals) experiments were conducted. Leaching of TCIPP from PUF appears to be a first order process. Concentrations of TCIPP in leachate generated by the experiments in this study ranged from 13 mg L -1 to 130 mg L -1 . In serial batch leaching experiments, >95% of TCIPP was depleted from PUF after 168 h total contact with leaching fluid. Our experiments indicate leaching is potentially a very significant pathway of TCIPP emissions to the environment. Copyright © 2017. Published by Elsevier Ltd.

Household energy requirement and value patterns

International Nuclear Information System (INIS)

Vringer, Kees; Aalbers, Theo; Blok, Kornelis

2007-01-01

For an effective consumer energy policy, it is important to know why some households require more energy than others. The aim of the study described here was to examine whether there is a relationship between the total household energy requirement, on one hand, and value patterns, the motivation to save energy or the problem perception of climate change, on the other. To examine these relationships, we held a consumer survey among 2304 respondent households. We did not find significant differences in the energy requirement of groups of households with different value patterns, taking into account the differences in the socio-economic situation of households. Only for the 'motivation to save energy' we did find that the least motivated group requires 10 GJ more energy than the average and most motivated groups; this is about 4% of the total household energy requirement. This means that a self-regulating energy policy, solely based on the fact that a strategy of internalising environmental responsibility will not be effective in saving energy. There are indications that a social dilemma is one of the reasons why people's consumption patterns do not conform to their value patterns, problem perception or motivation to save energy

ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS

Energy Technology Data Exchange (ETDEWEB)

Kramer, Klaas Jan; Homan, Greg; Brown, Rich; Worrell, Ernst; Masanet, Eric

2009-04-15

The term ?household carbon footprint? refers to the total annual carbon emissions associated with household consumption of energy, goods, and services. In this project, Lawrence Berkeley National Laboratory developed a carbon footprint modeling framework that characterizes the key underlying technologies and processes that contribute to household carbon footprints in California and the United States. The approach breaks down the carbon footprint by 35 different household fuel end uses and 32 different supply chain fuel end uses. This level of end use detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the carbon footprint of California households. The modeling framework was applied to estimate the annual home energy and supply chain carbon footprints of a prototypical California household. A preliminary assessment of parameter uncertainty associated with key model input data was also conducted. To illustrate the policy-relevance of this modeling framework, a case study was conducted that analyzed the achievable carbon footprint reductions associated with the adoption of energy efficient household and supply chain technologies.

Household factors influencing participation in bird feeding activity

DEFF Research Database (Denmark)

Davies, Zoe G.; Fuller, Richard A.; Dallimer, Martin

2012-01-01

whether and how the socioeconomic background of a household influences participation in food provision for wild birds, the most popular and widespread form of human-wildlife interaction. A majority of households feed birds (64% across rural and urban areas in England, and 53% within five British study...... cities). House type, household size and the age of the head of the household were all important predictors of bird feeding, whereas gross annual household income, the occupation of the head of the household, and whether the house is owned or rented were not. In both surveys, the prevalence of bird...... a week. The proportion of households regularly feeding birds was positively related to the age of the head of the household, but declined with gross annual income. As concerns grow about the lack of engagement between people and the natural environment, such findings are important if conservation...

Household electricity demand profiles

DEFF Research Database (Denmark)

Marszal, Anna Joanna; Heiselberg, Per Kvols; Larsen, Olena Kalyanova

2016-01-01

Highlights •A 1-min resolution household electricity load model is presented. •Model adapts a bottom-up approach with single appliance as the main building block. •Load profiles are used to analyse the flexibility potential of household appliances. •Load profiles can be applied in other domains, .......g. building energy simulations. •The demand level of houses with different number of occupants is well captured....

The use of income information of census enumeration area as a proxy for the household income in a household survey.

Science.gov (United States)

Gomes, Fabio S; Vasconcellos, Mauricio Tl; Anjos, Luiz A

2009-09-22

Some of the Census Enumeration Areas' (CEA) information may help planning the sample of population studies but it can also be used for some analyses that require information that is more difficult to obtain at the individual or household level, such as income. This paper verifies if the income information of CEA can be used as a proxy for household income in a household survey. A population-based survey conducted from January to December 2003 obtained data from a probabilistic sample of 1,734 households of Niterói, Rio de Janeiro, Brazil. Uniform semi-association models were adjusted in order to obtain information about the agreement/disagreement structure of data. The distribution of nutritional status categories of the population of Niterói according to income quintiles was performed using both CEA- and household-level income measures and then compared using Wald statistics for homogeneity. Body mass index was calculated using body mass and stature data measured in the households and then used to define nutritional status categories according to the World Health Organization. All estimates and statistics were calculated accounting for the structural information of the sample design and a significance level lower than 5% was adopted. The classification of households in the quintiles of household income was associated with the classification of these households in the quintiles of CEA income. The distribution of the nutritional status categories in all income quintiles did not differ significantly according to the source of income information (household or CEA) used in the definition of quintiles. The structure of agreement/disagreement between quintiles of the household's monthly per capita income and quintiles of the head-of-household's mean nominal monthly income of the CEA, as well as the results produced by these measures when they were associated with the nutritional status of the population, showed that the CEA's income information can be used when income

The use of income information of census enumeration area as a proxy for the household income in a household survey

Directory of Open Access Journals (Sweden)

Vasconcellos Mauricio TL

2009-09-01

Full Text Available Abstract Background Some of the Census Enumeration Areas' (CEA information may help planning the sample of population studies but it can also be used for some analyses that require information that is more difficult to obtain at the individual or household level, such as income. This paper verifies if the income information of CEA can be used as a proxy for household income in a household survey. Methods A population-based survey conducted from January to December 2003 obtained data from a probabilistic sample of 1,734 households of Niterói, Rio de Janeiro, Brazil. Uniform semi-association models were adjusted in order to obtain information about the agreement/disagreement structure of data. The distribution of nutritional status categories of the population of Niterói according to income quintiles was performed using both CEA- and household-level income measures and then compared using Wald statistics for homogeneity. Body mass index was calculated using body mass and stature data measured in the households and then used to define nutritional status categories according to the World Health Organization. All estimates and statistics were calculated accounting for the structural information of the sample design and a significance level lower than 5% was adopted. Results The classification of households in the quintiles of household income was associated with the classification of these households in the quintiles of CEA income. The distribution of the nutritional status categories in all income quintiles did not differ significantly according to the source of income information (household or CEA used in the definition of quintiles. Conclusion The structure of agreement/disagreement between quintiles of the household's monthly per capita income and quintiles of the head-of-household's mean nominal monthly income of the CEA, as well as the results produced by these measures when they were associated with the nutritional status of the population

Household hazardous waste disposal to landfill: Using LandSim to model leachate migration

International Nuclear Information System (INIS)

Slack, Rebecca J.; Gronow, Jan R.; Hall, David H.; Voulvoulis, Nikolaos

2007-01-01

Municipal solid waste (MSW) landfill leachate contains a number of aquatic pollutants. A specific MSW stream often referred to as household hazardous waste (HHW) can be considered to contribute a large proportion of these pollutants. This paper describes the use of the LandSim (Landfill Performance Simulation) modelling program to assess the environmental consequences of leachate release from a generic MSW landfill in receipt of co-disposed HHW. Heavy metals and organic pollutants were found to migrate into the zones beneath a model landfill site over a 20,000-year period. Arsenic and chromium were found to exceed European Union and US-EPA drinking water standards at the unsaturated zone/aquifer interface, with levels of mercury and cadmium exceeding minimum reporting values (MRVs). The findings demonstrate the pollution potential arising from HHW disposal with MSW. - Aquatic pollutants linked to the disposal of household hazardous waste in municipal landfills have the potential to exist in soil and groundwater for many years

Condições de produção vocal de vendedores de móveis e eletrodomésticos: correlação entre questões de saúde, hábitos e sintomas vocais Vocal production conditions for furniture and household appliance salespeople: correlation between health issues and vocal symptoms and habits

Directory of Open Access Journals (Sweden)

Léslie Piccolotto Ferreira

2008-12-01

Full Text Available OBJETIVO: analisar as condições de produção vocal, considerando saúde geral, hábitos vocais, assim como seus sintomas e possíveis causas, em vendedores de móveis e eletrodomésticos. MÉTODOS: foram selecionados 100 vendedores de móveis e eletrodomésticos, de ambos os sexos, em seu próprio local de trabalho, para responderem 16 questões que pesquisou dados pessoais, saúde geral, hábitos e sintomas vocais. Os dados foram analisados com auxílio do programa Statistical Package for Social Sciences, em sua versão 13.0. RESULTADOS: 66 homens e 34 mulheres, com idade média de 24 anos e tempo médio de profissão de 8,5 anos apontaram em maior número os distúrbios de saúde geral, relacionados às questões emocionais (31%, alterações no sono (27% e problemas digestivos (25%; as alterações auditivas, como coceira no ouvido (36%, intolerância a sons altos (29%, e dificuldade para ouvir (20%. Quanto aos hábitos relacionados à voz, fizeram referência a falar muito (83%, tomar gelado (73% e tomar café (68%. Os sintomas mais apontados foram garganta e boca seca (30%, cansaço ao falar (22% e pigarro (18%. As possíveis causas para a ocorrência dos sintomas foram uso intenso da voz (49%, presença de poeira (27% e de ar condicionado (23%. Apenas quatro deles relataram ter alteração de voz. CONCLUSÃO: os vendedores pesquisados percebem a presença dos sintomas vocais, mas não os relacionam com alterações de voz, assim como desconhecem os cuidados com a mesma. Necessitam, portanto, de ações de promoção de saúde e prevenção de alterações vocais, com o objetivo de sensibilizá-los com relação a essas questões.PURPOSE: to analyze the vocal production conditions for furniture and household appliance salespeople, considering the aspects of general health, vocal habits, as well as vocal symptoms and their possible causes. METHODS: 100 furniture and household appliance salespeople of both genders were selected in their

FOOD ACQUISITION AND INTRA-HOUSEHOLD CONSUMPTION PATTERNS: A STUDY OF LOW AND MIDDLE INCOME URBAN HOUSEHOLDS IN DELHI, INDIA.

Science.gov (United States)

Pradhan, Mr; Taylor, Fc; Agrawal, S; Prabhakaran, D; Ebrahim, S

2013-12-01

Food habits and choices in India are shifting due to many factors: changing food markets, fast urbanization, food price inflation, uncertain food production and unequal distribution during the past decade. This study aims to explore food acquisition and intra-household consumption patterns in urban low and middle income (LMI) households in Delhi. Twenty households were randomly selected from the Center for Cardio-metabolic Risk Reduction in South Asia (CARRS) surveillance study. Data were derived from 20 questionnaires administered to women responsible for food preparation, four key-informant-interviews, and 20 in-depth interviews with household heads during September-November 2011. STATA and ATLAS.ti software were used for data analysis. Half of the households spent at least two-thirds of their income on food. The major expenditures were on vegetables (22% of total food expenditure), milk and milk products (16%), and cereal and related products (15%). Income, food prices, food preferences, and seasonal variation influenced food expenditure. Adults usually ate two to three times a day while children ate more frequently. Eating sequence was based on the work pattern within the household and cultural beliefs. Contrary to previous evidence, there was no gender bias in intra-household food distribution. Women considered food acquisition, preparation and distribution part of their self-worth and played a major role in food related issues in the household. Women's key roles in food acquisition, preparation and intra household food consumption should be considered in formulating food policies and programs.

Knowledge Management as a Determining Factor in the Retention of Professionals in the Industry: A Case Study in an Organization in the Furniture Industry

Directory of Open Access Journals (Sweden)

Osmarina Pedro Garcia Garcia

2017-01-01

Full Text Available This study investigates which one(s of the knowledge management factor(s, via the tacit and/ or explicit way, are crucial in retaining professionals in a company in the furniture industry. The research was exploratory, with lifting procedure, and qualitative and quantitative approach. Data were collected from June to August 2014 in a furniture industry of Francisco Beltrão/PR, through a questionnaire applied to 224 employees of administrative, industrial and commercial areas, as follows: 11 managers, 44 responsible for the area and 169 operational employees. The Likert scale detected the frequency of respondents’ views. To provide consistency to the findings, the data obtained Multivariate Analysis statistical treatment, developed in the free R software. We applied the Main Component Analysis, Factorial Analysis, Correspondence Analysis, Correlation Analysis and Chi-squared Test separately for tacit and explicit ways. After the analysis, we concluded that through the factors shown in the study, both pathways influence the retention of employees of the surveyed company.

Division of household tasks and financial management

NARCIS (Netherlands)

Antonides, G.

2011-01-01

Both the standard economic model and bargaining theory make predictions about financial management and the division of household labor between household partners. Using a large Internet survey, we have tested several predictions about task divisions reported by Dutch household partners. The division

Household energy and consumption and expenditures, 1990

International Nuclear Information System (INIS)

1993-01-01

The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990

Characterization of household food waste in Denmark

DEFF Research Database (Denmark)

Edjabou, Vincent Maklawe Essonanawe; Petersen, C.; Scheutz, Charlotte

This paper presents a methodology and the results of compositional analysis of food waste from Danish families living in single-family houses. Residual household waste was sampled and manually sorted from 211 single-family houses in the suburb of Copenhagen. The main fractions contributing...... to the household food waste were avoidable vegetable food waste and non-avoidable vegetable food waste. Statistical analysis found a positive linear relationship between household size and the amount of the household food waste....

Preliminary study on the gamma radiation on the furniture carpet beetle Anthrenus flavipes LeConte (Coleoptera : Dermestidae)

International Nuclear Information System (INIS)

Hamad, B.Sh.; Khalaf, M.Z.; Jumaa, H.M.; Yasseen, N.H.; Al-Taweel, A.A.

2006-01-01

Preliminary study on the possibility of using gamma radiation to induce sexual sterility in males of the furniture carpet beetle A. Flavipes was carried out as a part of programme aiming to use SIT in controlling this pest. Results indicated that the induction of complete sterility in males was occurred by irradiated them as adults (24 hours old) by 100, 130 and 150 Gy. Furthermore, Results also showed that there was reducing in average number eggs laid by female that mated with irradiated male in comparison with females that matted with normal males

Feedback on household electricity consumption

DEFF Research Database (Denmark)

Grønhøj, Alice; Thøgersen, John

2011-01-01

In this paper, we present results from a project aiming to develop a new feedback technology to support sustainable living in private households. Against the backdrop of a review of the relevant literature and based on qualitative family interviews and registration of the households' electricity ...

Household medical waste disposal policy in Israel.

Science.gov (United States)

Barnett-Itzhaki, Zohar; Berman, Tamar; Grotto, Itamar; Schwartzberg, Eyal

2016-01-01

Large amounts of expired and unused medications accumulate in households. This potentially exposes the public to hazards due to uncontrolled use of medications. Most of the expired or unused medications that accumulate in households (household medical waste) is thrown to the garbage or flushed down to the sewage, potentially contaminating waste-water, water resources and even drinking water. There is evidence that pharmaceutical active ingredients reach the environment, including food, however the risk to public health from low level exposure to pharmaceuticals in the environment is currently unknown. In Israel, there is no legislation regarding household medical waste collection and disposal. Furthermore, only less than 14 % of Israelis return unused medications to Health Maintenance Organization (HMO) pharmacies. In this study, we investigated world-wide approaches and programs for household medical waste collection and disposal. In many countries around the world there are programs for household medical waste collection. In many countries there is legislation to address the issue of household medical waste, and this waste is collected in hospitals, clinics, law enforcement agencies and pharmacies. Furthermore, in many countries, medication producers and pharmacies pay for the collection and destruction of household medical waste, following the "polluter pays" principle. Several approaches and methods should be considered in Israel: (a) legislation and regulation to enable a variety of institutes to collect household medical waste (b) implementing the "polluter pays" principle and enforcing medical products manufactures to pay for the collection and destruction of household medical waste. (c) Raising awareness of patients, pharmacists, and other medical health providers regarding the health and environmental risks in accumulation of drugs and throwing them to the garbage, sink or toilet. (d) Adding specific instructions regarding disposal of the drug, in the

Electricity saving in households-A social cognitive approach

International Nuclear Information System (INIS)

Thogersen, John; Gronhoj, Alice

2010-01-01

We propose a conceptual framework for understanding the (lack of) energy saving efforts of private households based on Bandura's (1986) social cognitive theory. Results from applying this framework on a sample of Danish private electricity consumers are presented and it is concluded (a) that households' electricity consumption depends on both structural and motivational factors, (b) that their electricity saving effort depends on the strength of their internalized norms or self-expectations and on self-efficacy related factors, and (c) that there are predictable patterns of interaction among household members that influence their electricity consumption. The results suggest two approaches to promote electricity saving in households: (1) to change the socio-structural environment to be more facilitating for energy saving and empower householders to be more effective in their striving towards this goal through improved feedback about their household's electricity consumption and (2) social norms marketing, communicating social expectations and others' successful electricity saving achievements. - Research highlights: →A combination of survey and meter reading data is used to analyze energy saving in households. →Up to two adults from each household answered the questionnaire. →Dyadic data analysis is used to investigate interactions between household members. →Both structural and motivational factors account for households' electricity consumption. →Electricity saving efforts depends on internalized norms, self-efficacy and social interaction.

[The family. The poorest households with female heads].

Science.gov (United States)

Acosta Diaz, F

1992-01-01

Data from the household questionnaire of the 1987 Mexican Fertility and Health Survey were the basis for an analysis of the characteristics of households headed by women. 14.1% of households were headed by women in 1987, of which 14% were in rural and 86% in urban areas. 41.9% of the households headed by women contained only a woman and her children. Child care responsibilities are the main determinant of discrimination in the labor market for these women and oblige them to accept jobs that are not adequately paid. The social disadvantage of households headed by women is also related to their age and marital and educational status. Among male and female household heads respectively, 16.3% and 36.5% were over age 60, 16.4% and 27.5% were illiterate, and 92.7% and 8.4% were married or in union. 15.5% of the female heads were single, 24.7% were divorced or separated, and 51.4% were widows. Among employed female household heads, 49.2% were salaried, 36.5% were self-employed, and 10.1% were domestic workers. 63.8% of female and 46.3% of male household heads earned one minimum salary or less per month. The average size of households headed by women was 3.9 members, compared to 5.4 for households headed by men.

Electricity saving in households-A social cognitive approach

Energy Technology Data Exchange (ETDEWEB)

Thogersen, John, E-mail: jbt@asb.d [Aarhus University, School of Business and Social Sciences, Department of Marketing, Haslegaardsvej 10, DK-8210 Aarhus (Denmark); Gronhoj, Alice, E-mail: alg@asb.d [Aarhus University, School of Business and Social Sciences, Department of Marketing, Haslegaardsvej 10, DK-8210 Aarhus (Denmark)

2010-12-15

We propose a conceptual framework for understanding the (lack of) energy saving efforts of private households based on Bandura's (1986) social cognitive theory. Results from applying this framework on a sample of Danish private electricity consumers are presented and it is concluded (a) that households' electricity consumption depends on both structural and motivational factors, (b) that their electricity saving effort depends on the strength of their internalized norms or self-expectations and on self-efficacy related factors, and (c) that there are predictable patterns of interaction among household members that influence their electricity consumption. The results suggest two approaches to promote electricity saving in households: (1) to change the socio-structural environment to be more facilitating for energy saving and empower householders to be more effective in their striving towards this goal through improved feedback about their household's electricity consumption and (2) social norms marketing, communicating social expectations and others' successful electricity saving achievements. - Research highlights: {yields}A combination of survey and meter reading data is used to analyze energy saving in households. {yields}Up to two adults from each household answered the questionnaire. {yields}Dyadic data analysis is used to investigate interactions between household members. {yields}Both structural and motivational factors account for households' electricity consumption. {yields}Electricity saving efforts depends on internalized norms, self-efficacy and social interaction.

Food acquisition and intra-household consumption patterns: a study of low and middle income urban households in Delhi, India

Directory of Open Access Journals (Sweden)

MR Pradhan

2013-12-01

Full Text Available Background: Food habits and choices in India are shifting due to many factors: changing food markets, fast urbanization, food price inflation, uncertain food production and unequal distribution during the past decade. This study aims to explore food acquisition and intra-household consumption patterns in urban low and middle income (LMI households in Delhi. Methods: Twenty households were randomly selected from the Center for Cardio-metabolic Risk Reduction in South Asia (CARRS surveillance study. Data were derived from 20 questionnaires administered to women responsible for food preparation, four key-informant-interviews, and 20 in-depth interviews with household heads during September-November 2011. STATA and ATLAS.ti software were used for data analysis. Results: Half of the households spent at least two-thirds of their income on food. The major expenditures were on vegetables (22% of total food expenditure, milk and milk products (16%, and cereal and related products (15%. Income, food prices, food preferences, and seasonal variation influenced food expenditure. Adults usually ate two to three times a day while children ate more frequently. Eating sequence was based on the work pattern within the household and cultural beliefs. Contrary to previous evidence, there was no gender bias in intra-household food distribution. Women considered food acquisition, preparation and distribution part of their self-worth and played a major role in food related issues in the household. Conclusion: Women’s key roles in food acquisition, preparation and intra household food consumption should be considered in formulating food policies and programs. 

Food acquisition and intra-household consumption patterns: a study of low and middle income urban households in Delhi, India

Directory of Open Access Journals (Sweden)

MR Pradhan .

2013-12-01

Full Text Available Background: Food habits and choices in India are shifting due to many factors: changing food markets, fast urbanization, food price inflation, uncertain food production and unequal distribution during the past decade. This study aims to explore food acquisition and intra-household consumption patterns in urban low and middle income (LMI households in Delhi. Methods: Twenty households were randomly selected from the Center for Cardio-metabolic Risk Reduction in South Asia (CARRS surveillance study. Data were derived from 20 questionnaires administered to women responsible for food preparation, four key-informant-interviews, and 20 in-depth interviews with household heads during September-November 2011. STATA and ATLAS.ti software were used for data analysis. Results: Half of the households spent at least two-thirds of their income on food. The major expenditures were on vegetables (22% of total food expenditure, milk and milk products (16%, and cereal and related products (15%. Income, food prices, food preferences, and seasonal variation influenced food expenditure. Adults usually ate two to three times a day while children ate more frequently. Eating sequence was based on the work pattern within the household and cultural beliefs. Contrary to previous evidence, there was no gender bias in intra-household food distribution. Women considered food acquisition, preparation and distribution part of their self-worth and played a major role in food related issues in the household. Conclusion: Women’s key roles in food acquisition, preparation and intra household food consumption should be considered in formulating food policies and programs.  

Anticipatory child fostering and household economic security in Malawi

Directory of Open Access Journals (Sweden)

Lauren Bachan

2014-04-01

Full Text Available Background: While there is a rich literature on the practice of child fostering in sub-Saharan Africa, little is known about how fostering impacts receiving households, as few studies consider household conditions both before and after fostering. Despite the fact that circumstancessurrounding fostering vary, the literature's key distinction of fostering is often drawn along the simple line of whether or not a household is fostering a child. This paper argues that anticipation of fostering responsibilities, in particular, is a useful dimension to distinguish fostering experiences for receiving households. Objective: This paper examines the relationship between receiving a foster child and subsequent changes in household wealth. Particular emphasis is placed on how these changes are conditioned by differing levels of anticipation of the fostering event. Methods: This study uses data from Tsogolo la Thanzi (TLT, a longitudinal survey in Balaka, Malawi. Using data from 1754 TLT respondents, fixed effects pooled time-series models are estimated to assess whether and how receiving a foster child changes household wealth. Results: This paper demonstrates the heterogeneity of fostering experiences for receiving households.The results show that households that anticipate fostering responsibilities experience a greater increase in household wealth than both households that do not foster and those that are surprised by fostering. Conclusions: Households that anticipate fostering responsibilities exhibit the greatest increase in householdwealth. While fostering households that do not anticipate fostering responsibilities may not experience these gains, there is no evidence to indicate that such households are negatively impacted relative to households that do not foster. This finding suggests that additional childcare responsibilities may not be as detrimental to African households as some researchers have feared.

Income differentiation of households in the CR

Directory of Open Access Journals (Sweden)

Jana Stávková

2011-01-01

Full Text Available The Czech Republic has recently experienced phases of economic growth and periods of economic crisis, this fact affects the standard of living and household behaviour and affects the formation of life-style. This paper deals with the income situation of households. The main source of data is EU SILC survey from the years 2005 to 2008.The result of the enquiry and processing of primary data is information about the average income per household member, the poverty level and the number of households at risk of poverty. For the formulation of income differentiation is used Gini coefficient. Attention is paid to factors that affect income inequality (the number of household members, social group, age. Information, about the income situation of households, is amended by following indicators of material deprivation. The paper also analyses the impact of social transfers on income inequality. The analysis and subsequent solving of the problem of income inequality may be contributed with further analysis of empirical data of this type.

75 FR 10739 - Combustible Dust

Science.gov (United States)

2010-03-09

...; telephone: (202) 693- 1999. General and technical information. Contact Mat Chibbaro, P.E., Fire Protection..., fertilizer, tobacco, paper, soap, rubber, drugs, dried blood, dyes, certain textiles, and metals (such as... manufacturing, textile manufacturing, furniture manufacturing, metal processing, fabricated metal products and...

75 FR 3881 - Combustible Dust

Science.gov (United States)

2010-01-25

..., rubber, drugs, dried blood, dyes, certain textiles, and metals (such as aluminum and magnesium..., furniture manufacturing, metal processing, fabricated metal products and machinery manufacturing, pesticide... standard that will comprehensively address the fire and explosion hazards of combustible dust. The Agency...

75 FR 32142 - Combustible Dust

Science.gov (United States)

2010-06-07

.... Contact Mat Chibbaro, P.E., Fire Protection Engineer, Office of Safety Systems, OSHA Directorate of..., and metals (such as aluminum and magnesium). Industries that may have combustible dust hazards include..., chemical manufacturing, textile manufacturing, furniture manufacturing, metal processing, fabricated metal...

Changing Age and Household Patterns

DEFF Research Database (Denmark)

Højbjerg Jacobsen, Rasmus; Hougaard Jensen, Svend E.

2014-01-01

finances by almost 1% of GDP on the yearly budget. While the net fiscal effect of changing household structures is minor, the gross effects are substantial. In a future characterized by population ageing, public finances may be adversely affected by changes in both age and household structures, thus...

Sharing family and household:

DEFF Research Database (Denmark)

Winther, Ida Wentzel

Keynote: Family relationships are normatively assumed to be characterized by ‘sharing’, such as living together in the same home, occupying the same place, sharing stuff, blood and biology, spending special and ordinary time together, and consequently creating shared biographical experiences....... In that way, families are thrown into togetherness. At the same time, we see families in varying forms where 'sharing' is lived and contested differently. In Denmark, many children live in nuclear families, and many live in different variations of more than one household. For those who share household...... and family, 'sharing' will be a basic condition. No matter what, they should share life circumstances, more stories, more places and spaces, more households families with both kin and non-kin. This keynote addresses the particular of children’s experiences of living apart and/or living together in sharing...

Spending time and money within the household

DEFF Research Database (Denmark)

Browning, Martin; Gørtz, Mette

We consider theoretically and empirically the allocation of time and money within the household. The novelty of our empirical work is that we have a survey which provides information on both time use and the allocation of some goods within the household, for the same households. We can consider...

Effects of household dynamics on resource consumption and biodiversity.

Science.gov (United States)

Liu, Jianguo; Daily, Gretchen C; Ehrlich, Paul R; Luck, Gary W

2003-01-30

Human population size and growth rate are often considered important drivers of biodiversity loss, whereas household dynamics are usually neglected. Aggregate demographic statistics may mask substantial changes in the size and number of households, and their effects on biodiversity. Household dynamics influence per capita consumption and thus biodiversity through, for example, consumption of wood for fuel, habitat alteration for home building and associated activities, and greenhouse gas emissions. Here we report that growth in household numbers globally, and particularly in countries with biodiversity hotspots (areas rich in endemic species and threatened by human activities), was more rapid than aggregate population growth between 1985 and 2000. Even when population size declined, the number of households increased substantially. Had the average household size (that is, the number of occupants) remained static, there would have been 155 million fewer households in hotspot countries in 2000. Reduction in average household size alone will add a projected 233 million additional households to hotspot countries during the period 2000-15. Rapid increase in household numbers, often manifested as urban sprawl, and resultant higher per capita resource consumption in smaller households pose serious challenges to biodiversity conservation.

Households And Bio-Resources In Plateau State Nigeria

International Nuclear Information System (INIS)

Dasogot, A.D.

2002-01-01

The paper examines household dynamics as variables for bio-resource or biomass resource potentials and utilisation. Information was collected from 250 randomly selected households in five villages of the State, mainly using questionnaire administered on household heads, and a direct measurement/observation about what households have, do or say concerning the study problem. It was shown that insignificant quantity were utilised for various purposes like cooking and heating, but the bio-resources generated met both domestic and income needs of the households. It was concluded that beneficial use (compost, biogas or generation of electricity) should be found for the largely unused bio-resources and household dynamics should be integrated into bio-resource energy planning

Household location choices: implications for biodiversity conservation.

Science.gov (United States)

Peterson, M Nils; Chen, Xiaodong; Liu, Jianguo

2008-08-01

Successful conservation efforts require understanding human behaviors that directly affect biodiversity. Choice of household location represents an observable behavior that has direct effects on biodiversity conservation, but no one has examined the sociocultural predictors of this choice relative to its environmental impacts. We conducted a case study of the Teton Valley of Idaho and Wyoming (U.S.A.) that (1) explored relationships between sociodemographic variables, environmental attitudes, and the environmental impact of household location choices, (2) assessed the potential for small household sizes in natural areas to multiply the environmental impacts of household location decisions, and (3) evaluated how length of residency predicted the environmental attitudes of people living in natural areas. We collected sociodemographic data, spatial coordinates, and land-cover information in a survey of 416 households drawn from a random sample of Teton Valley residents (95% compliance rate). Immigrants (respondents not born in the study area) with the lowest education levels and least environmentally oriented attitudes lived in previously established residential areas in disproportionately high numbers, and older and more educated immigrants with the most environmentally oriented attitudes lived in natural areas in disproportionately high numbers. Income was not a significant predictor of household location decisions. Those living in natural areas had more environmental impact per person because of the location and because small households (educated, and potentially growing more environmentally oriented, these patterns are troubling for biodiversity conservation. Our results demonstrate a need for environmentalists to make household location decisions that reflect their environmental attitudes and future research to address how interactions between education level, environmental attitudes, population aging, and household location choices influence biodiversity

Individual and Household Willingness to Pay for Public Goods

OpenAIRE

John Quiggin

1998-01-01

The issue of whether willingness to pay (WTP) for the benefits generated by a public good should be elicited on an individual or on a household basis is addressed. Differences between individual and household WTP may arise when members of the household are mutually altruistic. It is shown that, for general specifications of altruism, household WTP is less than the sum of household members' individual WTP. Implications for the choice between household and individual measures of WTP are conside...

Household energy consumption and expenditures 1993

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-05

This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

Determinants of Vulnerability to Livelihood Insecurity at Household ...

African Journals Online (AJOL)

USER

Household Economic Approach of measuring vulnerability. The Household ... external and internal sides as proposed by Conway and Chambers (1989): ... education and occupation of the household head, dependency ratio, exposure.

Flame retardants in UK furniture increase smoke toxicity more than they reduce fire growth rate.

Science.gov (United States)

McKenna, Sean T; Birtles, Robert; Dickens, Kathryn; Walker, Richard G; Spearpoint, Michael J; Stec, Anna A; Hull, T Richard

2018-04-01

This paper uses fire statistics to show the importance of fire toxicity on fire deaths and injuries, and the importance of upholstered furniture and bedding on fatalities from unwanted fires. The aim was to compare the fire hazards (fire growth and smoke toxicity) using different upholstery materials. Four compositions of sofa-bed were compared: three meeting UK Furniture Flammability Regulations (FFR), and one using materials without flame retardants intended for the mainland European market. Two of the UK sofa-beds relied on chemical flame retardants to meet the FFR, the third used natural materials and a technical weave in order to pass the test. Each composition was tested in the bench-scale cone calorimeter (ISO 5660) and burnt as a whole sofa-bed in a sofa configuration in a 3.4 × 2.25 × 2.4 m 3 test room. All of the sofas were ignited with a No. 7 wood crib; the temperatures and yields of toxic products are reported. The sofa-beds containing flame retardants burnt somewhat more slowly than the non-flame retarded EU sofa-bed, but in doing so produced significantly greater quantities of the main fire toxicants, carbon monoxide and hydrogen cyanide. Assessment of the effluents' potential to incapacitate and kill is provided showing the two UK flame retardant sofa-beds to be the most dangerous, followed by the sofa-bed made with European materials. The UK sofa-bed made only from natural materials (Cottonsafe ® ) burnt very slowly and produced very low concentrations of toxic gases. Including fire toxicity in the FFR would reduce the chemical flame retardants and improve fire safety. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?

Directory of Open Access Journals (Sweden)

Małgorzata Pawlaczyk-Łuszczyńska

2016-06-01

Full Text Available Background: The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL. Material and Methods: Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20–57 years, directly employed in the manufacture of furniture. The actual workers’ hearing threshold levels (HTLs were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Results: Workers under study were exposed to noise at daily noise exposure levels of 82.7–94.8 dB (mean: 90.9 dB for a period of 3–14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers’ HTLs at 3000–6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg and lower (≤ 78 mm Hg diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. Conclusions: The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3:337–351

[Do hearing threshold levels in workers of the furniture industry reflect their exposure to noise?].

Science.gov (United States)

Pawlaczyk-Łuszczyńska, Małgorzata; Dudarewicz, Adam; Czaja, Norman; Bortkiewicz, Alicja

The aim of the study was to analyze the hearing status of employees of a furniture factory with respect to their exposure to noise and the presence of additional risk factors of noise-induced hearing loss (NIHL). Noise measurements, questionnaire survey and assessment of hearing, using pure tone audiometry, were carried out in 50 male workers, aged 20-57 years, directly employed in the manufacture of furniture. The actual workers' hearing threshold levels (HTLs) were compared with the predictions calculated according to PN-ISO 1999:2000 based on age, gender and noise exposure. Workers under study were exposed to noise at daily noise exposure levels of 82.7-94.8 dB (mean: 90.9 dB) for a period of 3-14 years. In all subjects, mean HTL at 500 Hz, 1000 Hz, 2000 Hz and 4000 Hz did not exceed 25 dB. Nevertheless, high frequency notches were found in 11% of audiograms. The actual workers' HTLs at 3000-6000 Hz were similar to those predicted using PN-ISO 1999:2000. There were statistical significant differences between HTLs in subgroups of people with higher (> 78 mm Hg) and lower (≤ 78 mm Hg) diastolic blood pressure, smokers and non-smokers, and those working with organic solvents. Hearing loss was more evident in subjects affected by the additional risk factors specified above. The results confirm the need to consider, in addition to noise, also some other NIHL risk factors, such as tobacco smoking, elevated blood pressure, and co-exposure to organic solvents when estimating the risk of NIHL and developing the hearing conservation programs for workers. Med Pr 2016;67(3):337-351. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

The influence of household pets on the composition and quantity of allergenic mite fauna within Irish homes: a preliminary investigation.

Science.gov (United States)

Clarke, D; Dix, E; Liddy, S; Gormally, M; Byrne, M

2016-03-01

Allergenic mites are responsible for inducing hypersensitive reactions in genetically predisposed people worldwide. Mites in dust from 30 Irish homes with pets (dogs, n = 23; cats, n = 7) were compared with those in 30 homes without pets. House dust mites constituted 78% of all mites recorded, with Dermatophagoides pteronyssinus (Acariformes: Pyroglyphidae) representing 57-72% of mites in furniture and mattresses in both home types compared with only 22% of mites in pet beds. Although storage mites accounted for just 13% of all mites recorded, they represented 46% of mites recorded in pet beds. Median levels of the dust mite allergen Der p 1 (µg/g) in dust samples from mattresses in homes without pets were significantly greater than in mattresses from homes with pets, reflecting the greater densities of D. pteronyssinus found in the former home category. Mite species richness was greater in homes with pets (17 species) than in homes without pets (13 species). This suggests that although the presence of pets can result in a wider variety of epidemiologically important mite species within households, increased competition among mite species may result in a more balanced mite fauna in the home, inhibiting the dominance of any one species and hence lowering allergen-associated risks. © 2015 The Royal Entomological Society.

Heat treatment of the common furniture beetle Anobium punctatum (Coleoptera: Anobiidae), at temperature between 45 degrees and 54 degrees C. under dry and humid conditions

DEFF Research Database (Denmark)

Hansen, Lise Stengaard; Jensen, Karl-Martin Vagn

1998-01-01

The combinations of exposure times and temperatures (45 degrees to 54 degrees C.) without addition of moisture necessary to obtain 100 per cent mortality were determined on all stages of commn furniture beetle, Anobium punctatum. Lethal combinations vary from minutes at 46 degrees to 5 minutes...

Sources of household salt in South Africa.

Science.gov (United States)

Jooste, Pieter L

2005-01-01

Marketing of non-iodized salt through unconventional distribution channels is one of the factors weakening the national salt iodization program in South Africa. The aim of this study was therefore to quantify the various sources of household salt, and to relate this information to socio-economic status. Questionnaire information was collected by personal interview during home visits from a multistage, cluster, probability sample of 2164 adults representative of the adult population. Nationally 77.7% of households obtained their table salt from the typical food shops distributing iodized salt. However, in the nine different provinces between 8 and 37.3% of households used unconventional sources, distributing mainly non-iodized salt, to obtain their household salt. These alternative sources include distributors of agricultural salt, small general dealer shops called spaza shops, in peri-urban and rural townships, street vendors and salt saches placed in the packaging of maize meal bags. Country-wide around 30% of low socio-economic households obtained their salt from unconventional sources compared to less than 5% in high socio-economic households, emphasizing the vulnerability of low socio-economic groups to the use of non-iodized salt. Intervention strategies should mobilize all role players involved in unconventional marketing channels of household salt to provide only iodized salt to consumers, as required by law.

Heavy metals speciation in solid household waste incineration residues and contribution to the interpretation of volatilization processes; Speciation des metaux lourds dans les residus solides d'usines d'incineration d'ordures menageres et contribution a l'interpretation des processus de vaporisation

Energy Technology Data Exchange (ETDEWEB)

Gagnepain, B.

1998-07-01

Different types of solid residues of incineration plants have at first been analyzed by complementary techniques. Relative tendencies to the heavy metals speciation have been established. On the one hand, the chemical trapping of heavy metals by ashes as well as their respective mobilities have been characterized by the sequential extraction method. On the other hand, morphology of ashes, localization, repartition and chemical environment of heavy metals have been studied by X-ray microanalysis. It has been shown that Cd and Zn are highly leachable, Cr, Ni and Cu are trapped in ashes and Pb, As have intermediary behaviours with a slow mobility. Concentration gradients of heavy metals in terms of the ashes granulometry have been deduced. An experimental device for studying the vaporization of heavy metals in a fluidized bed (simulation of the heavy metals release during the incineration of household wastes) has been perfected. Experiments have been carried out in conditions (temperature, gaseous atmosphere, residence time) near those of the real processes. A model, coupling the mass and heat transfers with a thermodynamic anticipation of the heavy metals behaviour has been developed and has allowed to exploit these obtained results. (O.M.)

Intrahousehold allocation, household headship and nutrition of ...

African Journals Online (AJOL)

This paper aims to establish whether there is a significant difference in nutritional status of children in male-headed households, de jure female-headed households and de facto female-headed households. The study uses a sample of 199 children aged 6 to 60 months, of mothers in reproductive age, derived from 499 ...

A Picture of Subsidized Households 2009

Data.gov (United States)

Department of Housing and Urban Development — Picture of Subsidized Households describes the nearly 5 million households living in HUD-subsidized housing in the United States for the year 2009. Picture 2009...

House prices and household mobility in the Netherlands : Empirical analyses of financial characteristics of the household

NARCIS (Netherlands)

Steegmans, J.W.A.M.

2017-01-01

The dissertation studies the role of financial household characteristics in the determination of house prices and household mobility in the Dutch owner-occupied housing market. We investigate how various financial characteristics -- in particular income, wealth, housing equity, and prospective

The natural gas - alternative decision for households consumption

International Nuclear Information System (INIS)

Manoilova, T.; Tzaleva, E.; Boshnakova, V.

2002-01-01

Some expectations for households future fuel and energy consumption changes have been presented. The main reasons, motivating the households gasification implementation and its influence over the sectors energy consumption have been analysed. Some improvements of household consumption structure expectation are developed with the view to environment harmful emissions decrease. An example of household natural gas consumption structure by processes is developed. (authors)

Capitalization of Local Products through Agro- Household

Directory of Open Access Journals (Sweden)

Ramona Ciolac

2010-10-01

Full Text Available In every household there are many family activities that provide the necessary income or living foods. Some activities are related to cultivation of land, others for breeding other means services provided by the vilagers. The products of the own household must cover 40% of meals offered to tourists. These products are produced by the householder work in their household, the tourist having the opportunity to observe how the products are produced and participate effectively in this production. Specific rural household products can be recovered through tourism by both indirect and direct ways. Both variants can generate increased profitability and interest of the tourist business activity and impose a sense of satisfaction for quality benefit, issues that may be, in turn, assumptions favorable to the extension of this work.