WorldWideScience

Sample records for meso-scale modeling rams

  1. Probabilistic, meso-scale flood loss modelling

    Kreibich, Heidi; Botto, Anna; Schröter, Kai; Merz, Bruno

    2016-04-01

    Flood risk analyses are an important basis for decisions on flood risk management and adaptation. However, such analyses are associated with significant uncertainty, even more if changes in risk due to global change are expected. Although uncertainty analysis and probabilistic approaches have received increased attention during the last years, they are still not standard practice for flood risk assessments and even more for flood loss modelling. State of the art in flood loss modelling is still the use of simple, deterministic approaches like stage-damage functions. Novel probabilistic, multi-variate flood loss models have been developed and validated on the micro-scale using a data-mining approach, namely bagging decision trees (Merz et al. 2013). In this presentation we demonstrate and evaluate the upscaling of the approach to the meso-scale, namely on the basis of land-use units. The model is applied in 19 municipalities which were affected during the 2002 flood by the River Mulde in Saxony, Germany (Botto et al. submitted). The application of bagging decision tree based loss models provide a probability distribution of estimated loss per municipality. Validation is undertaken on the one hand via a comparison with eight deterministic loss models including stage-damage functions as well as multi-variate models. On the other hand the results are compared with official loss data provided by the Saxon Relief Bank (SAB). The results show, that uncertainties of loss estimation remain high. Thus, the significant advantage of this probabilistic flood loss estimation approach is that it inherently provides quantitative information about the uncertainty of the prediction. References: Merz, B.; Kreibich, H.; Lall, U. (2013): Multi-variate flood damage assessment: a tree-based data-mining approach. NHESS, 13(1), 53-64. Botto A, Kreibich H, Merz B, Schröter K (submitted) Probabilistic, multi-variable flood loss modelling on the meso-scale with BT-FLEMO. Risk Analysis.

  2. Optogenetic stimulation of a meso-scale human cortical model

    Selvaraj, Prashanth; Szeri, Andrew; Sleigh, Jamie; Kirsch, Heidi

    2015-03-01

    Neurological phenomena like sleep and seizures depend not only on the activity of individual neurons, but on the dynamics of neuron populations as well. Meso-scale models of cortical activity provide a means to study neural dynamics at the level of neuron populations. Additionally, they offer a safe and economical way to test the effects and efficacy of stimulation techniques on the dynamics of the cortex. Here, we use a physiologically relevant meso-scale model of the cortex to study the hypersynchronous activity of neuron populations during epileptic seizures. The model consists of a set of stochastic, highly non-linear partial differential equations. Next, we use optogenetic stimulation to control seizures in a hyperexcited cortex, and to induce seizures in a normally functioning cortex. The high spatial and temporal resolution this method offers makes a strong case for the use of optogenetics in treating meso scale cortical disorders such as epileptic seizures. We use bifurcation analysis to investigate the effect of optogenetic stimulation in the meso scale model, and its efficacy in suppressing the non-linear dynamics of seizures.

  3. LBM estimation of thermal conductivity in meso-scale modelling

    Grucelski, A

    2016-01-01

    Recently, there is a growing engineering interest in more rigorous prediction of effective transport coefficients for multicomponent, geometrically complex materials. We present main assumptions and constituents of the meso-scale model for the simulation of the coal or biomass devolatilisation with the Lattice Boltzmann method. For the results, the estimated values of the thermal conductivity coefficient of coal (solids), pyrolytic gases and air matrix are presented for a non-steady state with account for chemical reactions in fluid flow and heat transfer. (paper)

  4. Implementation of meso-scale radioactive dispersion model for GPU

    Sunarko [National Nuclear Energy Agency of Indonesia (BATAN), Jakarta (Indonesia). Nuclear Energy Assessment Center; Suud, Zaki [Bandung Institute of Technology (ITB), Bandung (Indonesia). Physics Dept.

    2017-05-15

    Lagrangian Particle Dispersion Method (LPDM) is applied to model atmospheric dispersion of radioactive material in a meso-scale of a few tens of kilometers for site study purpose. Empirical relationships are used to determine the dispersion coefficient for various atmospheric stabilities. Diagnostic 3-D wind-field is solved based on data from one meteorological station using mass-conservation principle. Particles representing radioactive pollutant are dispersed in the wind-field as a point source. Time-integrated air concentration is calculated using kernel density estimator (KDE) in the lowest layer of the atmosphere. Parallel code is developed for GTX-660Ti GPU with a total of 1 344 scalar processors using CUDA. A test of 1-hour release discovers that linear speedup is achieved starting at 28 800 particles-per-hour (pph) up to about 20 x at 14 4000 pph. Another test simulating 6-hour release with 36 000 pph resulted in a speedup of about 60 x. Statistical analysis reveals that resulting grid doses are nearly identical in both CPU and GPU versions of the code.

  5. Probabilistic flood damage modelling at the meso-scale

    Kreibich, Heidi; Botto, Anna; Schröter, Kai; Merz, Bruno

    2014-05-01

    Decisions on flood risk management and adaptation are usually based on risk analyses. Such analyses are associated with significant uncertainty, even more if changes in risk due to global change are expected. Although uncertainty analysis and probabilistic approaches have received increased attention during the last years, they are still not standard practice for flood risk assessments. Most damage models have in common that complex damaging processes are described by simple, deterministic approaches like stage-damage functions. Novel probabilistic, multi-variate flood damage models have been developed and validated on the micro-scale using a data-mining approach, namely bagging decision trees (Merz et al. 2013). In this presentation we show how the model BT-FLEMO (Bagging decision Tree based Flood Loss Estimation MOdel) can be applied on the meso-scale, namely on the basis of ATKIS land-use units. The model is applied in 19 municipalities which were affected during the 2002 flood by the River Mulde in Saxony, Germany. The application of BT-FLEMO provides a probability distribution of estimated damage to residential buildings per municipality. Validation is undertaken on the one hand via a comparison with eight other damage models including stage-damage functions as well as multi-variate models. On the other hand the results are compared with official damage data provided by the Saxon Relief Bank (SAB). The results show, that uncertainties of damage estimation remain high. Thus, the significant advantage of this probabilistic flood loss estimation model BT-FLEMO is that it inherently provides quantitative information about the uncertainty of the prediction. Reference: Merz, B.; Kreibich, H.; Lall, U. (2013): Multi-variate flood damage assessment: a tree-based data-mining approach. NHESS, 13(1), 53-64.

  6. Meso-scale modeling of irradiated concrete in test reactor

    Giorla, A.; Vaitová, M.; Le Pape, Y.; Štemberk, P.

    2015-01-01

    Highlights: • A meso-scale finite element model for irradiated concrete is developed. • Neutron radiation-induced volumetric expansion is a predominant degradation mode. • Confrontation with expansion and damage obtained from experiments is successful. • Effects of paste shrinkage, creep and ductility are discussed. - Abstract: A numerical model accounting for the effects of neutron irradiation on concrete at the mesoscale is detailed in this paper. Irradiation experiments in test reactor (Elleuch et al., 1972), i.e., in accelerated conditions, are simulated. Concrete is considered as a two-phase material made of elastic inclusions (aggregate) subjected to thermal and irradiation-induced swelling and embedded in a cementitious matrix subjected to shrinkage and thermal expansion. The role of the hardened cement paste in the post-peak regime (brittle-ductile transition with decreasing loading rate), and creep effects are investigated. Radiation-induced volumetric expansion (RIVE) of the aggregate cause the development and propagation of damage around the aggregate which further develops in bridging cracks across the hardened cement paste between the individual aggregate particles. The development of damage is aggravated when shrinkage occurs simultaneously with RIVE during the irradiation experiment. The post-irradiation expansion derived from the simulation is well correlated with the experimental data and, the obtained damage levels are fully consistent with previous estimations based on a micromechanical interpretation of the experimental post-irradiation elastic properties (Le Pape et al., 2015). The proposed modeling opens new perspectives for the interpretation of test reactor experiments in regards to the actual operation of light water reactors.

  7. Meso-scale modeling of irradiated concrete in test reactor

    Giorla, A. [Oak Ridge National Laboratory, One Bethel Valley Road, Oak Ridge, TN 37831 (United States); Vaitová, M. [Czech Technical University, Thakurova 7, 166 29 Praha 6 (Czech Republic); Le Pape, Y., E-mail: lepapeym@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Road, Oak Ridge, TN 37831 (United States); Štemberk, P. [Czech Technical University, Thakurova 7, 166 29 Praha 6 (Czech Republic)

    2015-12-15

    Highlights: • A meso-scale finite element model for irradiated concrete is developed. • Neutron radiation-induced volumetric expansion is a predominant degradation mode. • Confrontation with expansion and damage obtained from experiments is successful. • Effects of paste shrinkage, creep and ductility are discussed. - Abstract: A numerical model accounting for the effects of neutron irradiation on concrete at the mesoscale is detailed in this paper. Irradiation experiments in test reactor (Elleuch et al., 1972), i.e., in accelerated conditions, are simulated. Concrete is considered as a two-phase material made of elastic inclusions (aggregate) subjected to thermal and irradiation-induced swelling and embedded in a cementitious matrix subjected to shrinkage and thermal expansion. The role of the hardened cement paste in the post-peak regime (brittle-ductile transition with decreasing loading rate), and creep effects are investigated. Radiation-induced volumetric expansion (RIVE) of the aggregate cause the development and propagation of damage around the aggregate which further develops in bridging cracks across the hardened cement paste between the individual aggregate particles. The development of damage is aggravated when shrinkage occurs simultaneously with RIVE during the irradiation experiment. The post-irradiation expansion derived from the simulation is well correlated with the experimental data and, the obtained damage levels are fully consistent with previous estimations based on a micromechanical interpretation of the experimental post-irradiation elastic properties (Le Pape et al., 2015). The proposed modeling opens new perspectives for the interpretation of test reactor experiments in regards to the actual operation of light water reactors.

  8. A three-dimensional meso-scale modeling for helium bubble growth in metals

    Suzudo, T.; Kaburaki, H.; Wakai, E.

    2007-01-01

    A three-dimensional meso-scale computer model using a Monte-Carlo simulation method has been proposed to simulate the helium bubble growth in metals. The primary merit of this model is that it enables the visual comparison between the microstructure observed by the TEM imaging and those by calculations. The modeling is so simple that one can control easily the calculation by tuning parameters. The simulation results are confirmed by the ideal gas law and the capillary relation. helium bubble growth, meso-scale modeling, Monte-Carlo simulation, the ideal gas law and the capillary relation. (authors)

  9. The plastic rotation effect in an isotropic gradient plasticity model for applications at the meso scale

    Poh, Leong Hien; Peerlings, R.H.J.

    2016-01-01

    Although formulated to represent a large system of polycrystals at the macroscopic level, isotropic gradient plasticity models have routinely been adopted at the meso scale. For such purposes, it is crucial to incorporate the plastic rotation effect in order to obtain a reasonable approximation of

  10. Meso-scale effects of tropical deforestation in Amazonia: preparatory LBA modelling studies

    A. J. Dolman

    1999-08-01

    Full Text Available As part of the preparation for the Large-Scale Biosphere Atmosphere Experiment in Amazonia, a meso-scale modelling study was executed to highlight deficiencies in the current understanding of land surface atmosphere interaction at local to sub-continental scales in the dry season. Meso-scale models were run in 1-D and 3-D mode for the area of Rondonia State, Brazil. The important conclusions are that without calibration it is difficult to model the energy partitioning of pasture; modelling that of forest is easier due to the absence of a strong moisture deficit signal. The simulation of the boundary layer above forest is good, above deforested areas (pasture poor. The models' underestimate of the temperature of the boundary layer is likely to be caused by the neglect of the radiative effects of aerosols caused by biomass burning, but other factors such as lack of sufficient entrainment in the model at the mixed layer top may also contribute. The Andes generate patterns of subsidence and gravity waves, the effects of which are felt far into the Rondonian area The results show that the picture presented by GCM modelling studies may need to be balanced by an increased understanding of what happens at the meso-scale. The results are used to identify key measurements for the LBA atmospheric meso-scale campaign needed to improve the model simulations. Similar modelling studies are proposed for the wet season in Rondonia, when convection plays a major role.Key words. Atmospheric composition and structure (aerosols and particles; biosphere-atmosphere interactions · Meterology and atmospheric dynamics (mesoscale meterology

  11. Meso-scale effects of tropical deforestation in Amazonia: preparatory LBA modelling studies

    A. J. Dolman

    Full Text Available As part of the preparation for the Large-Scale Biosphere Atmosphere Experiment in Amazonia, a meso-scale modelling study was executed to highlight deficiencies in the current understanding of land surface atmosphere interaction at local to sub-continental scales in the dry season. Meso-scale models were run in 1-D and 3-D mode for the area of Rondonia State, Brazil. The important conclusions are that without calibration it is difficult to model the energy partitioning of pasture; modelling that of forest is easier due to the absence of a strong moisture deficit signal. The simulation of the boundary layer above forest is good, above deforested areas (pasture poor. The models' underestimate of the temperature of the boundary layer is likely to be caused by the neglect of the radiative effects of aerosols caused by biomass burning, but other factors such as lack of sufficient entrainment in the model at the mixed layer top may also contribute. The Andes generate patterns of subsidence and gravity waves, the effects of which are felt far into the Rondonian area The results show that the picture presented by GCM modelling studies may need to be balanced by an increased understanding of what happens at the meso-scale. The results are used to identify key measurements for the LBA atmospheric meso-scale campaign needed to improve the model simulations. Similar modelling studies are proposed for the wet season in Rondonia, when convection plays a major role.

    Key words. Atmospheric composition and structure (aerosols and particles; biosphere-atmosphere interactions · Meterology and atmospheric dynamics (mesoscale meterology

  12. Coastal Foredune Evolution, Part 2: Modeling Approaches for Meso-Scale Morphologic Evolution

    2017-03-01

    for Meso-Scale Morphologic Evolution by Margaret L. Palmsten1, Katherine L. Brodie2, and Nicholas J. Spore2 PURPOSE: This Coastal and Hydraulics ...managers because foredunes provide ecosystem services and can reduce storm damages to coastal infrastructure, both of which increase the resiliency...MS 2 U.S. Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, Duck, NC ERDC/CHL CHETN-II-57 March 2017 2 models of

  13. Modelling daily sediment yield from a meso-scale catchment, a case study in SW Poland

    Keesstra, S. D.; Schoorl, J.; Temme, A. J. A. M.

    2009-01-01

    For management purposes it is important to be able to assess the sediment yield of a catchment. however, at this moment models designed for estimating sediment yield are only capable to give either very detailed storm-based information or year averages. The storm-based models require input data that are not available for most catchment. However, models that estimate yearly averages, ignore a lot of other detailed information, like daily discharge and precipitation data. There are currently no models available that model sediment yield on the temporal scale of one day and the spatial scale of a meso-scale catchment, without making use of very detailed input data. To fill this scientific and management gap, landscape evolution model LAPSUS has been adapted to model sediment yield on a daily basis. This model has the water balance as a base. To allow calibration with the discharge at the outlet, a subsurface flow module has been added to the model. (Author) 12 refs.

  14. Modelling daily sediment yield from a meso-scale catchment, a case study in SW Poland

    Keesstra, S. D.; Schoorl, J.; Temme, A. J. A. M.

    2009-07-01

    For management purposes it is important to be able to assess the sediment yield of a catchment. however, at this moment models designed for estimating sediment yield are only capable to give either very detailed storm-based information or year averages. The storm-based models require input data that are not available for most catchment. However, models that estimate yearly averages, ignore a lot of other detailed information, like daily discharge and precipitation data. There are currently no models available that model sediment yield on the temporal scale of one day and the spatial scale of a meso-scale catchment, without making use of very detailed input data. To fill this scientific and management gap, landscape evolution model LAPSUS has been adapted to model sediment yield on a daily basis. This model has the water balance as a base. To allow calibration with the discharge at the outlet, a subsurface flow module has been added to the model. (Author) 12 refs.

  15. Quantitative modelling of the closure of meso-scale parallel currents in the nightside ionosphere

    A. Marchaudon

    2004-01-01

    Full Text Available On 12 January 2000, during a northward IMF period, two successive conjunctions occur between the CUTLASS SuperDARN radar pair and the two satellites Ørsted and FAST. This situation is used to describe and model the electrodynamic of a nightside meso-scale arc associated with a convection shear. Three field-aligned current sheets, one upward and two downward on both sides, are observed. Based on the measurements of the parallel currents and either the conductance or the electric field profile, a model of the ionospheric current closure is developed along each satellite orbit. This model is one-dimensional, in a first attempt and a two-dimensional model is tested for the Ørsted case. These models allow one to quantify the balance between electric field gradients and ionospheric conductance gradients in the closure of the field-aligned currents. These radar and satellite data are also combined with images from Polar-UVI, allowing for a description of the time evolution of the arc between the two satellite passes. The arc is very dynamic, in spite of quiet solar wind conditions. Periodic enhancements of the convection and of electron precipitation associated with the arc are observed, probably associated with quasi-periodic injections of particles due to reconnection in the magnetotail. Also, a northward shift and a reorganisation of the precipitation pattern are observed, together with a southward shift of the convection shear. Key words. Ionosphere (auroral ionosphere; electric fields and currents; particle precipitation – Magnetospheric physics (magnetosphere-ionosphere interactions

  16. Meso-Scale Modeling of Spall in a Heterogeneous Two-Phase Material

    Springer, Harry Keo [Univ. of California, Davis, CA (United States)

    2008-07-11

    The influence of the heterogeneous second-phase particle structure and applied loading conditions on the ductile spall response of a model two-phase material was investigated. Quantitative metallography, three-dimensional (3D) meso-scale simulations (MSS), and small-scale spall experiments provided the foundation for this study. Nodular ductile iron (NDI) was selected as the model two-phase material for this study because it contains a large and readily identifiable second- phase particle population. Second-phase particles serve as the primary void nucleation sites in NDI and are, therefore, central to its ductile spall response. A mathematical model was developed for the NDI second-phase volume fraction that accounted for the non-uniform particle size and spacing distributions within the framework of a length-scale dependent Gaussian probability distribution function (PDF). This model was based on novel multiscale sampling measurements. A methodology was also developed for the computer generation of representative particle structures based on their mathematical description, enabling 3D MSS. MSS were used to investigate the effects of second-phase particle volume fraction and particle size, loading conditions, and physical domain size of simulation on the ductile spall response of a model two-phase material. MSS results reinforce existing model predictions, where the spall strength metric (SSM) logarithmically decreases with increasing particle volume fraction. While SSM predictions are nearly independent of applied load conditions at lower loading rates, which is consistent with previous studies, loading dependencies are observed at higher loading rates. There is also a logarithmic decrease in SSM for increasing (initial) void size, as well. A model was developed to account for the effects of loading rate, particle size, matrix sound-speed, and, in the NDI-specific case, the probabilistic particle volume fraction model. Small-scale spall experiments were designed

  17. Meso-Scale Modelling of Deformation, Damage and Failure in Dual Phase Steels

    Sari Sarraf, Iman

    Advanced high strength steels (AHSS), such as dual phase (DP) and transformation induced plasticity (TRIP) steels, offer high ductility, formability, and strength, as well as high strength-to-weight ratio and improved crash resistance. Dual phase steels belong to a family of high strength grades which consist of martensite, responsible for strengthening, distributed in a ductile ferrite matrix which accommodates the deformation throughout the forming process. It has been shown that the predominant damage mechanism and failure in DP steels depends on the ferrite and martensite grain sizes and their morphology, and can range from a mixture of brittle and ductile rupture to completely ductile rupture in a quasi-static uniaxial tension test. In this study, a hybrid finite element cellular automata model, initially proposed by Anton Shterenlikht (2003), was developed to evaluate the forming behaviour and predict the onset of instability and damage evolution in a dual phase steel. In this model, the finite element constitutive model is used to represent macro-level strain gradients and a damage variable, and two different cell arrays are designed to represent the ductile and brittle fracture modes in meso-scale. In the FE part of the model, a modified Rousselier ductile damage model is developed to account for nucleation, growth and coalescence of voids. Also, several rate-dependent hardening models were developed and evaluated to describe the work hardening flow curve of DP600. Based on statistical analysis and simulation results, a modified Johnson-Cook (JC) model and a multiplicative combination of the Voce-modified JC functions were found to be the most accurate hardening models. The developed models were then implemented in a user-defined material subroutine (VUMAT) for ABAQUS/Explicit finite element simulation software to simulate uniaxial tension tests at strain rates ranging from 0.001 1/s to 1000 1/s, Marciniak tests, and electrohydraulic free-forming (EHFF

  18. Meso-scale modelling of the heat conductivity effect on the shock response of a porous material

    Resnyansky, A. D.

    2017-06-01

    Understanding of deformation mechanisms of porous materials under shock compression is important for tailoring material properties at the shock manufacturing of advanced materials from substrate powders and for studying the response of porous materials under shock loading. Numerical set-up of the present work considers a set of solid particles separated by air representing a volume of porous material. Condensed material in the meso-scale set-up is simulated with a viscoelastic rate sensitive material model with heat conduction formulated from the principles of irreversible thermodynamics. The model is implemented in the CTH shock physics code. The meso-scale CTH simulation of the shock loading of the representative volume reveals the mechanism of pore collapse and shows in detail the transition from a high porosity case typical for abnormal Hugoniot response to a moderate porosity case typical for conventional Hugoniot response. Results of the analysis agree with previous analytical considerations and support hypotheses used in the two-phase approach.

  19. Tracer experiment data sets for the verification of local and meso-scale atmospheric dispersion models including topographic effects

    Sartori, E.; Schuler, W.

    1992-01-01

    Software and data for nuclear energy applications are acquired, tested and distributed by several information centres; in particular, relevant computer codes are distributed internationally by the OECD/NEA Data Bank (France) and by ESTSC and EPIC/RSIC (United States). This activity is coordinated among the centres and is extended outside the OECD area through an arrangement with the IAEA. This article proposes more specifically a scheme for acquiring, storing and distributing atmospheric tracer experiment data (ATE) required for verification of atmospheric dispersion models especially the most advanced ones including topographic effects and specific to the local and meso-scale. These well documented data sets will form a valuable complement to the set of atmospheric dispersion computer codes distributed internationally. Modellers will be able to gain confidence in the predictive power of their models or to verify their modelling skills. (au)

  20. A dual theory of price and value in a meso-scale economic model with stochastic profit rate

    Greenblatt, R. E.

    2014-12-01

    The problem of commodity price determination in a market-based, capitalist economy has a long and contentious history. Neoclassical microeconomic theories are based typically on marginal utility assumptions, while classical macroeconomic theories tend to be value-based. In the current work, I study a simplified meso-scale model of a commodity capitalist economy. The production/exchange model is represented by a network whose nodes are firms, workers, capitalists, and markets, and whose directed edges represent physical or monetary flows. A pair of multivariate linear equations with stochastic input parameters represent physical (supply/demand) and monetary (income/expense) balance. The input parameters yield a non-degenerate profit rate distribution across firms. Labor time and price are found to be eigenvector solutions to the respective balance equations. A simple relation is derived relating the expected value of commodity price to commodity labor content. Results of Monte Carlo simulations are consistent with the stochastic price/labor content relation.

  1. A unified bond theory, probabilistic meso-scale modeling, and experimental validation of deformed steel rebar in normal strength concrete

    Wu, Chenglin

    Bond between deformed rebar and concrete is affected by rebar deformation pattern, concrete properties, concrete confinement, and rebar-concrete interfacial properties. Two distinct groups of bond models were traditionally developed based on the dominant effects of concrete splitting and near-interface shear-off failures. Their accuracy highly depended upon the test data sets selected in analysis and calibration. In this study, a unified bond model is proposed and developed based on an analogy to the indentation problem around the rib front of deformed rebar. This mechanics-based model can take into account the combined effect of concrete splitting and interface shear-off failures, resulting in average bond strengths for all practical scenarios. To understand the fracture process associated with bond failure, a probabilistic meso-scale model of concrete is proposed and its sensitivity to interface and confinement strengths are investigated. Both the mechanical and finite element models are validated with the available test data sets and are superior to existing models in prediction of average bond strength (rib spacing-to-height ratio of deformed rebar. It can accurately predict the transition of failure modes from concrete splitting to rebar pullout and predict the effect of rebar surface characteristics as the rib spacing-to-height ratio increases. Based on the unified theory, a global bond model is proposed and developed by introducing bond-slip laws, and validated with testing of concrete beams with spliced reinforcement, achieving a load capacity prediction error of less than 26%. The optimal rebar parameters and concrete cover in structural designs can be derived from this study.

  2. A meso-scale model to study the compressive strength of woven carbon fiber reinforced plastics

    Schormans, J.M.J.; Remmers, J.J.C.; Wilson, W.; Deshpande, V.S.

    2016-01-01

    Modeling kink-band formation in woven composites using a detailed micro-model is numerically expensive. In order to reduce the computational resources, a method to homogenize fiber-tows is proposed which uses a rules of mixture approach. The method is tested by comparing the stiffness and

  3. Meso-scale modeling of air pollution transport/chemistry/deposition and its application

    Kitada, Toshihiro

    2007-01-01

    Transport/chemistry/deposition model for atmospheric trace chemical species is now regarded as an important tool for an understanding of the effects of various human activities, such as fuel combustion and deforestation, on human health, eco-system, and climate and for planning of appropriate control of emission sources. Several 'comprehensive' models have been proposed such as RADM (Chang, et al., 1987), STEM-II (Carmichael, et al., 1986), and CMAQ (Community Multi-scale Air Quality model, e.g., EPA website, 2003); the 'comprehensive' models include not only gas/aerosol phase chemistry but also aqueous phase chemistry in cloud/rain water in addition to the processes of advection, diffusion, wet deposition (mass transfer between aqueous and gas/aerosol phases), and dry deposition. The target of the development of the 'comprehensive' model will be that the model can correctly reproduce mass balance of various chemical species in the atmosphere with keeping adequate accuracy for calculated concentration distributions of chemical species. For the purpose, one of the important problems is a reliable wet deposition modeling, and here, we introduce two types of methods of 'cloud-resolving' and 'non-cloud-resolving' modeling for the wet deposition of pollutants. (author)

  4. Up-scaling of multi-variable flood loss models from objects to land use units at the meso-scale

    H. Kreibich

    2016-05-01

    Full Text Available Flood risk management increasingly relies on risk analyses, including loss modelling. Most of the flood loss models usually applied in standard practice have in common that complex damaging processes are described by simple approaches like stage-damage functions. Novel multi-variable models significantly improve loss estimation on the micro-scale and may also be advantageous for large-scale applications. However, more input parameters also reveal additional uncertainty, even more in upscaling procedures for meso-scale applications, where the parameters need to be estimated on a regional area-wide basis. To gain more knowledge about challenges associated with the up-scaling of multi-variable flood loss models the following approach is applied: Single- and multi-variable micro-scale flood loss models are up-scaled and applied on the meso-scale, namely on basis of ATKIS land-use units. Application and validation is undertaken in 19 municipalities, which were affected during the 2002 flood by the River Mulde in Saxony, Germany by comparison to official loss data provided by the Saxon Relief Bank (SAB.In the meso-scale case study based model validation, most multi-variable models show smaller errors than the uni-variable stage-damage functions. The results show the suitability of the up-scaling approach, and, in accordance with micro-scale validation studies, that multi-variable models are an improvement in flood loss modelling also on the meso-scale. However, uncertainties remain high, stressing the importance of uncertainty quantification. Thus, the development of probabilistic loss models, like BT-FLEMO used in this study, which inherently provide uncertainty information are the way forward.

  5. Up-scaling of multi-variable flood loss models from objects to land use units at the meso-scale

    Kreibich, Heidi; Schröter, Kai; Merz, Bruno

    2016-05-01

    Flood risk management increasingly relies on risk analyses, including loss modelling. Most of the flood loss models usually applied in standard practice have in common that complex damaging processes are described by simple approaches like stage-damage functions. Novel multi-variable models significantly improve loss estimation on the micro-scale and may also be advantageous for large-scale applications. However, more input parameters also reveal additional uncertainty, even more in upscaling procedures for meso-scale applications, where the parameters need to be estimated on a regional area-wide basis. To gain more knowledge about challenges associated with the up-scaling of multi-variable flood loss models the following approach is applied: Single- and multi-variable micro-scale flood loss models are up-scaled and applied on the meso-scale, namely on basis of ATKIS land-use units. Application and validation is undertaken in 19 municipalities, which were affected during the 2002 flood by the River Mulde in Saxony, Germany by comparison to official loss data provided by the Saxon Relief Bank (SAB).In the meso-scale case study based model validation, most multi-variable models show smaller errors than the uni-variable stage-damage functions. The results show the suitability of the up-scaling approach, and, in accordance with micro-scale validation studies, that multi-variable models are an improvement in flood loss modelling also on the meso-scale. However, uncertainties remain high, stressing the importance of uncertainty quantification. Thus, the development of probabilistic loss models, like BT-FLEMO used in this study, which inherently provide uncertainty information are the way forward.

  6. Ensemble modelling of nitrogen fluxes: data fusion for a Swedish meso-scale catchment

    J.-F. Exbrayat

    2010-12-01

    Full Text Available Model predictions of biogeochemical fluxes at the landscape scale are highly uncertain, both with respect to stochastic (parameter and structural uncertainty. In this study 5 different models (LASCAM, LASCAM-S, a self-developed tool, SWAT and HBV-N-D designed to simulate hydrological fluxes as well as mobilisation and transport of one or several nitrogen species were applied to the mesoscale River Fyris catchment in mid-eastern Sweden.

    Hydrological calibration against 5 years of recorded daily discharge at two stations gave highly variable results with Nash-Sutcliffe Efficiency (NSE ranging between 0.48 and 0.83. Using the calibrated hydrological parameter sets, the parameter uncertainty linked to the nitrogen parameters was explored in order to cover the range of possible predictions of exported loads for 3 nitrogen species: nitrate (NO3, ammonium (NH4 and total nitrogen (Tot-N. For each model and each nitrogen species, predictions were ranked in two different ways according to the performance indicated by two different goodness-of-fit measures: the coefficient of determination R2 and the root mean square error RMSE. A total of 2160 deterministic Single Model Ensembles (SME was generated using an increasing number of members (from the 2 best to the 10 best single predictions. Finally the best SME for each model, nitrogen species and discharge station were selected and merged into 330 different Multi-Model Ensembles (MME. The evolution of changes in R2 and RMSE was used as a performance descriptor of the ensemble procedure.

    In each studied case, numerous ensemble merging schemes were identified which outperformed any of their members. Improvement rates were generally higher when worse members were introduced. The highest improvements were achieved for the nitrogen SMEs compiled with multiple linear regression models with R2 selected members, which

  7. Meso-scale Modeling of Block Copolymers Self-Assembly in Casting Solutions for Membrane Manufacture

    Moreno Chaparro, Nicolas

    2016-05-01

    Isoporous membranes manufactured from diblock copolymer are successfully produced at laboratory scale under controlled conditions. Because of the complex phenomena involved, membrane preparation requires trial and error methodologies to find the optimal conditions, leading to a considerable demand of resources. Experimental insights demonstrate that the self-assembly of the block copolymers in solution has an effect on the final membrane structure. Nevertheless, the complete understanding of these multi-scale phenomena is elusive. Herein we use the coarse-grained method Dissipative Particle Dynamics to study the self-assembly of block copolymers that are used for the preparation of the membranes. To simulate representative time and length scales, we introduce a framework for model reduction of polymer chain representations for dissipative particle dynamics, which preserves the properties governing the phase equilibria. We reduce the number of degrees of freedom by accounting for the correlation between beads in fine-grained models via power laws and the consistent scaling of the simulation parameters. The coarse-graining models are consistent with the experimental evidence, showing a morphological transition of the aggregates as the polymer concentration and solvent affinity change. We show that hexagonal packing of the micelles can occur in solution within different windows of polymer concentration depending on the solvent affinity. However, the shape and size dispersion of the micelles determine the characteristic arrangement. We describe the order of crew-cut micelles using a rigid-sphere approximation and propose different phase parameters that characterize the emergence of monodisperse-spherical micelles in solution. Additionally, we investigate the effect of blending asymmetric diblock copolymers (AB/AC) over the properties of the membranes. We observe that the co-assembly mechanism localizes the AC molecules at the interface of A and B domains, and induces

  8. Simulation of atmospheric temperature inversions over greater cairo using the MM5 Meso-Scale atmospheric model

    Kandil, H.A.; Elhadidi, B.M.; Kader, A. A.; Moaty, A.A.; Sherif, A.O.

    2006-01-01

    Air pollution episodes have been recorded in Cairo, during the fall season, since 1999, as a result of specific meteorological conditions combined with large quantity of pollutants created by several ground-based sources. The main reason for the smog-like episodes (black clouds) is adverse weather conditions with low and variable winds, high humidity and strong temperature inversions in the few-hundred meters above the ground. The two important types of temperature inversion affecting the air pollution are surface or ground (radiation) inversion and subsidence (elevated) inversion. The surface temperature inversion is associated with a rapid decrease in the ground surface temperature with the simultaneous existence of warm air in the lower troposphere. The inversion develops at dusk and continues until the surface warms again the following day. Pollutants emitted during the night are caught under this i nversion lid. S ubsidence inversion forms when warm air masses move over colder air masses. The inversion develops with a stagnating high-pressure system (generally associated with fair weather). Under these conditions, the pressure gradient becomes progressively weaker so that winds become light. These light winds greatly reduce the horizontal transport and dispersion of pollutants. At the same time, the subsidence inversion acts as a barrier to the vertical dispersion of the pollutants. In this study, the Penn State/NCAR meso -scale model (MM5) is used to simulate the temperature inversion phenomenon over Greater Cairo region during the fall season of 2004. Accurate computations of the heat transfer at the surface are needed to capture this phenomenon. This can only be achieved by high-resolution simulations in both horizontal and vertical directions. Hence, for accurate simulation of the temperature inversion over Greater Cairo, four nested domains of resolutions of 27 km, 9 km, 3 km and 1 km, respectively, were used in the horizontal planes. Furthermore, 42

  9. Wildfire particulate matter in Europe during summer 2003: meso-scale modeling of smoke emissions, transport and radiative effects

    A. Hodzic

    2007-08-01

    Full Text Available The present study investigates effects of wildfire emissions on air quality in Europe during an intense fire season that occurred in summer 2003. A meso-scale chemistry transport model CHIMERE is used, together with ground based and satellite aerosol optical measurements, to assess the dispersion of fire emissions and to quantify the associated radiative effects. The model has been improved to take into account a MODIS-derived daily smoke emission inventory as well as the injection altitude of smoke particles. The simulated aerosol optical properties are put into a radiative transfer model to estimate (off-line the effects of smoke particles on photolysis rates and atmospheric radiative forcing. We have found that the simulated wildfires generated comparable amounts of primary aerosol pollutants (130 kTons of PM2.5, fine particles to anthropogenic sources during August 2003, and caused significant changes in aerosol optical properties not only close to the fire source regions, but also over a large part of Europe as a result of the long-range transport of the smoke. Including these emissions into the model significantly improved its performance in simulating observed aerosol concentrations and optical properties. Quantitative comparison with MODIS and POLDER data during the major fire event (3–8 August 2003 showed the ability of the model to reproduce high aerosol optical thickness (AOT over Northern Europe caused by the advection of the smoke plume from the Portugal source region. Although there was a fairly good spatial agreement with satellite data (correlation coefficients ranging from 0.4 to 0.9, the temporal variability of AOT data at specific AERONET locations was not well captured by the model. Statistical analyses of model-simulated AOT data at AERONET ground stations showed a significant decrease in the model biases suggesting that wildfire emissions are responsible for a 30% enhancement in mean AOT values during the heat

  10. Regionalization of meso-scale physically based nitrogen modeling outputs to the macro-scale by the use of regression trees

    Künne, A.; Fink, M.; Kipka, H.; Krause, P.; Flügel, W.-A.

    2012-06-01

    In this paper, a method is presented to estimate excess nitrogen on large scales considering single field processes. The approach was implemented by using the physically based model J2000-S to simulate the nitrogen balance as well as the hydrological dynamics within meso-scale test catchments. The model input data, the parameterization, the results and a detailed system understanding were used to generate the regression tree models with GUIDE (Loh, 2002). For each landscape type in the federal state of Thuringia a regression tree was calibrated and validated using the model data and results of excess nitrogen from the test catchments. Hydrological parameters such as precipitation and evapotranspiration were also used to predict excess nitrogen by the regression tree model. Hence they had to be calculated and regionalized as well for the state of Thuringia. Here the model J2000g was used to simulate the water balance on the macro scale. With the regression trees the excess nitrogen was regionalized for each landscape type of Thuringia. The approach allows calculating the potential nitrogen input into the streams of the drainage area. The results show that the applied methodology was able to transfer the detailed model results of the meso-scale catchments to the entire state of Thuringia by low computing time without losing the detailed knowledge from the nitrogen transport modeling. This was validated with modeling results from Fink (2004) in a catchment lying in the regionalization area. The regionalized and modeled excess nitrogen correspond with 94%. The study was conducted within the framework of a project in collaboration with the Thuringian Environmental Ministry, whose overall aim was to assess the effect of agro-environmental measures regarding load reduction in the water bodies of Thuringia to fulfill the requirements of the European Water Framework Directive (Bäse et al., 2007; Fink, 2006; Fink et al., 2007).

  11. Combined meso-scale modeling and experimental investigation of the effect of mechanical damage on the transport properties of cementitious composites

    Raghavan, Balaji; Niknezhad, Davood; Bernard, Fabrice; Kamali-Bernard, Siham

    2016-09-01

    The transport properties of cementitious composites such as concrete are important indicators of their durability, and are known to be heavily influenced by mechanical loading. In the current work, we use meso-scale hygro-mechanical modeling with a morphological 3D two phase mortar-aggregate model, in conjunction with experimentally obtained properties, to investigate the coupling between mechanical loading and damage and the permeability of the composite. The increase in permeability of a cylindrical test specimen at 28% aggregate fraction during a uniaxial displacement-controlled compression test at 85% of the peak load was measured using a gas permeameter. The mortar's mechanical behavior is assumed to follow the well-known compression damaged plasticity (CDP) model with isotropic damage, at varying thresholds, and obtained from different envelope curves. The damaged intrinsic permeability of the mortar evolves according to a logarithmic matching law with progressive loading. We fit the matching law parameters to the experimental result for the test specimen by inverse identification using our meso-scale model. We then subject a series of virtual composite specimens to quasi-static uniaxial compressive loading with varying boundary conditions to obtain the simulated damage and strain evolutions, and use the damage data and the previously identified parameters to determine the evolution of the macroscopic permeability tensor for the specimens, using a network model. We conduct a full parameter study by varying aggregate volume fraction, granulometric distribution, loading/boundary conditions and "matching law" parameters, as well as for different strain-damage thresholds and uniaxial loading envelope curves. Based on this study, we propose Avrami equation-based upper and lower bounds for the evolution of the damaged permeability of the composite.

  12. Simulation of Wind-Driven Snow Redistribution at a High-Elevation Alpine Site Using a Meso-Scale Atmospheric Model

    Vionnet, V.; Martin, E.; Masson, V.; Guyomarc'h, G.; Naaim-Bouvet, F.; Prokop, A.; Durand, Y.; Lac, C.

    2012-12-01

    In alpine regions, blowing snow events strongly influence the temporal and spatial evolution of the snow depth distribution throughout the winter season. We recently developed a new simulation system to gain understanding on the complex processes that drive the redistribution of snow by the wind in complex terrain. This new system couples directly the detailed snow-pack model Crocus with the meso-scale atmospheric model Meso-NH. A blowing snow scheme allows Meso-NH to simulate the transport of snow particles in the atmosphere. We used the coupled system to study a blowing snow event with snowfall that occurred in February 2011 in the Grandes Rousses range (French Alps). Three nested domains at an horizontal resolution of 450, 150 and 50 m allow the model to simulate the complex 3D precipitation and wind fields around our experimental site (2720 m a.s.l.) during this 22-hour event. Wind-induced snow transport is activated over the domains of higher resolution (150 and 50 m). We firstly assessed the ability of the model to reproduce atmospheric flows at high resolution in alpine terrain using a large dataset of observations (meteorological data, vertical profile of wind speed). Simulated blowing snow fluxes are then compared with measurements from SPC and mechanical snow traps. Finally a map of snow erosion and accumulation produced by Terrestrial Laser measurements allows to evaluate the quality of the simulated snow depth redistribution.

  13. Evaluation of high intensity precipitation from 16 Regional climate models over a meso-scale catchment in the Midlands Regions of England

    Wetterhall, F.; He, Y.; Cloke, H.; Pappenberger, F.; Freer, J.; Wilson, M.; McGregor, G.

    2009-04-01

    Local flooding events are often triggered by high-intensity rain-fall events, and it is important that these can be correctly modelled by Regional Climate Models (RCMs) if the results are to be used in climate impact assessment. In this study, daily precipitation from 16 RCMs was compared with observations over a meso-scale catchment in the Midlands Region of England. The RCM data was provided from the European research project ENSEMBLES and the precipitation data from the UK MetOffice. The RCMs were all driven by reanalysis data from the ERA40 dataset over the time period 1961-2000. The ENSEMBLES data is on the spatial scale of 25 x 25 km and it was disaggregated onto a 5 x 5 km grid over the catchment and compared with interpolated observational data with the same resolution. The mean precipitation was generally underestimated by the ENSEMBLES data, and the maximum and persistence of high intensity rainfall was even more underestimated. The inter-annual variability was not fully captured by the RCMs, and there was a systematic underestimation of precipitation during the autumn months. The spatial pattern in the modelled precipitation data was too smooth in comparison with the observed data, especially in the high altitudes in the western part of the catchment where the high precipitation usually occurs. The RCM outputs cannot reproduce the current high intensity precipitation events that are needed to sufficiently model extreme flood events. The results point out the discrepancy between climate model output and the high intensity precipitation input needs for hydrological impact modelling.

  14. Application and comparison of the SCS-CN-based rainfall-runoff model in meso-scale watershed and field scale

    Luo, L.; Wang, Z.

    2010-12-01

    Soil Conservation Service Curve Number (SCS-CN) based hydrologic model, has widely been used for agricultural watersheds in recent years. However, there will be relative error when applying it due to differentiation of geographical and climatological conditions. This paper introduces a more adaptable and propagable model based on the modified SCS-CN method, which specializes into two different scale cases of research regions. Combining the typical conditions of the Zhanghe irrigation district in southern part of China, such as hydrometeorologic conditions and surface conditions, SCS-CN based models were established. The Xinbu-Qiao River basin (area =1207 km2) and the Tuanlin runoff test area (area =2.87 km2)were taken as the study areas of basin scale and field scale in Zhanghe irrigation district. Applications were extended from ordinary meso-scale watershed to field scale in Zhanghe paddy field-dominated irrigated . Based on actual measurement data of land use, soil classification, hydrology and meteorology, quantitative evaluation and modifications for two coefficients, i.e. preceding loss and runoff curve, were proposed with corresponding models, table of CN values for different landuse and AMC(antecedent moisture condition) grading standard fitting for research cases were proposed. The simulation precision was increased by putting forward a 12h unit hydrograph of the field area, and 12h unit hydrograph were simplified. Comparison between different scales show that it’s more effectively to use SCS-CN model on field scale after parameters calibrated in basin scale These results can help discovering the rainfall-runoff rule in the district. Differences of established SCS-CN model's parameters between the two study regions are also considered. Varied forms of landuse and impacts of human activities were the important factors which can impact the rainfall-runoff relations in Zhanghe irrigation district.

  15. Meso-scale wind variability. Final report

    Larsen, S.; Larsen, X.; Vincent, C.; Soerensen, P.; Pinson, P.; Trombe, P.-J.; Madsen, H.; Cutululis, N.

    2011-11-15

    The project has aimed to characterize mesoscale meteorological phenomenon for the North Sea and the Inner Danish waters, and additionally aimed on improving the predictability and quality of the power production from offshore windfarms. The meso-scale meteorology has been characterized with respect to the physical processes, climatology, spectral characteristics and correlation properties based on measurements from wind farms, satellite data (SAR) and mesoscale numerical modeling (WRF). The abilities of the WRF model to characterize and predict relevant mesoscale phenomenon has been proven. Additionally application of statistical forecasting, using a Markov switching approach that can be related to the meteorological conditions, to analyze and short term predict the power production from an offshore wind farms have been documented. Two PhD studies have been conducted in connection with the project. The project has been a cooperative project between Risoe DTU, IMM DTU, DONG Energy, Vattenfall and VESTAS. It is registered as Energinet.dk, project no. 2007-1-7141. (Author)

  16. Evaluation of the performance of a meso-scale NWP model to forecast solar irradiance on Reunion Island for photovoltaic power applications

    Kalecinski, Natacha; Haeffelin, Martial; Badosa, Jordi; Periard, Christophe

    2013-04-01

    Solar photovoltaic power is a predominant source of electrical power on Reunion Island, regularly providing near 30% of electrical power demand for a few hours per day. However solar power on Reunion Island is strongly modulated by clouds in small temporal and spatial scales. Today regional regulations require that new solar photovoltaic plants be combined with storage systems to reduce electrical power fluctuations on the grid. Hence cloud and solar irradiance forecasting becomes an important tool to help optimize the operation of new solar photovoltaic plants on Reunion Island. Reunion Island, located in the South West of the Indian Ocean, is exposed to persistent trade winds, most of all in winter. In summer, the southward motion of the ITCZ brings atmospheric instabilities on the island and weakens trade winds. This context together with the complex topography of Reunion Island, which is about 60 km wide, with two high summits (3070 and 2512 m) connected by a 1500 m plateau, makes cloudiness very heterogeneous. High cloudiness variability is found between mountain and coastal areas and between the windward, leeward and lateral regions defined with respect to the synoptic wind direction. A detailed study of local dynamics variability is necessary to better understand cloud life cycles around the island. In the presented work, our approach to explore the short-term solar irradiance forecast at local scales is to use the deterministic output from a meso-scale numerical weather prediction (NWP) model, AROME, developed by Meteo France. To start we evaluate the performance of the deterministic forecast from AROME by using meteorological measurements from 21 meteorological ground stations widely spread around the island (and with altitudes from 8 to 2245 m). Ground measurements include solar irradiation, wind speed and direction, relative humidity, air temperature, precipitation and pressure. Secondly we study in the model the local dynamics and thermodynamics that

  17. High-frequency and meso-scale winter sea-ice variability in the Southern Ocean in a high-resolution global ocean model

    Stössel, Achim; von Storch, Jin-Song; Notz, Dirk; Haak, Helmuth; Gerdes, Rüdiger

    2018-03-01

    This study is on high-frequency temporal variability (HFV) and meso-scale spatial variability (MSV) of winter sea-ice drift in the Southern Ocean simulated with a global high-resolution (0.1°) sea ice-ocean model. Hourly model output is used to distinguish MSV characteristics via patterns of mean kinetic energy (MKE) and turbulent kinetic energy (TKE) of ice drift, surface currents, and wind stress, and HFV characteristics via time series of raw variables and correlations. We find that (1) along the ice edge, the MSV of ice drift coincides with that of surface currents, in particular such due to ocean eddies; (2) along the coast, the MKE of ice drift is substantially larger than its TKE and coincides with the MKE of wind stress; (3) in the interior of the ice pack, the TKE of ice drift is larger than its MKE, mostly following the TKE pattern of wind stress; (4) the HFV of ice drift is dominated by weather events, and, in the absence of tidal currents, locally and to a much smaller degree by inertial oscillations; (5) along the ice edge, the curl of the ice drift is highly correlated with that of surface currents, mostly reflecting the impact of ocean eddies. Where ocean eddies occur and the ice is relatively thin, ice velocity is characterized by enhanced relative vorticity, largely matching that of surface currents. Along the ice edge, ocean eddies produce distinct ice filaments, the realism of which is largely confirmed by high-resolution satellite passive-microwave data.

  18. Micro- and meso-scale effects of forested terrain

    Dellwik, Ebba; Mann, Jakob; Sogachev, Andrey

    2011-01-01

    scales are the height of the planetary boundary layer and the Monin-Obukhov length, which both are related to the energy balance of the surface. Examples of important micro- and meso-scale effects of forested terrain are shown using data and model results from recent and ongoing experiments. For micro......The height and rotor diameter of modern wind turbines are so extensive, that the wind conditions they encounter often are well above the surface layer, where traditionally it is assumed that wind direction and turbulent fluxes are constant with respect to height, if the surface is homogenous....... Deviations from the requirement of homogeneity are often the focus of micro-scale studies in forested areas. Yet, to explain the wind climate in the relevant height range for turbines, it is necessary to also account for the length scales that are important parameters for the meso-scale flow. These length...

  19. Assessment of surface water resources availability using catchment modeling and the results of tracer studies in the meso-scale Migina Catchment, Rwanda

    Munyaneza, O.; Mukubwa, A.; Maskey, S.; Wenninger, J.; Uhlenbrook, S.

    2013-12-01

    In the last couple of years, different hydrological research projects were undertaken in the Migina catchment (243.2 km2), a tributary of the Kagera river in Southern Rwanda. These projects were aimed to understand hydrological processes of the catchment using analytical and experimental approaches and to build a pilot case whose experience can be extended to other catchments in Rwanda. In the present study, we developed a hydrological model of the catchment, which can be used to inform water resources planning and decision making. The semi-distributed hydrological model HEC-HMS (version 3.5) was used with its soil moisture accounting, unit hydrograph, liner reservoir (for base flow) and Muskingum-Cunge (river routing) methods. We used rainfall data from 12 stations and streamflow data from 5 stations, which were collected as part of this study over a period of two years (May 2009 and June 2011). The catchment was divided into five sub-catchments each represented by one of the five observed streamflow gauges. The model parameters were calibrated separately for each sub-catchment using the observed streamflow data. Calibration results obtained were found acceptable at four stations with a Nash-Sutcliffe Model Efficiency of 0.65 on daily runoff at the catchment outlet. Due to the lack of sufficient and reliable data for longer periods, a model validation (split sample test) was not undertaken. However, we used results from tracer based hydrograph separation from a previous study to compare our model results in terms of the runoff components. It was shown that the model performed well in simulating the total flow volume, peak flow and timing as well as the portion of direct runoff and base flow. We observed considerable disparities in the parameters (e.g. groundwater storage) and runoff components across the five sub-catchments, that provided insights into the different hydrological processes at sub-catchment scale. We conclude that such disparities justify the need

  20. Unifying Inference of Meso-Scale Structures in Networks.

    Tunç, Birkan; Verma, Ragini

    2015-01-01

    Networks are among the most prevalent formal representations in scientific studies, employed to depict interactions between objects such as molecules, neuronal clusters, or social groups. Studies performed at meso-scale that involve grouping of objects based on their distinctive interaction patterns form one of the main lines of investigation in network science. In a social network, for instance, meso-scale structures can correspond to isolated social groupings or groups of individuals that serve as a communication core. Currently, the research on different meso-scale structures such as community and core-periphery structures has been conducted via independent approaches, which precludes the possibility of an algorithmic design that can handle multiple meso-scale structures and deciding which structure explains the observed data better. In this study, we propose a unified formulation for the algorithmic detection and analysis of different meso-scale structures. This facilitates the investigation of hybrid structures that capture the interplay between multiple meso-scale structures and statistical comparison of competing structures, all of which have been hitherto unavailable. We demonstrate the applicability of the methodology in analyzing the human brain network, by determining the dominant organizational structure (communities) of the brain, as well as its auxiliary characteristics (core-periphery).

  1. Unifying Inference of Meso-Scale Structures in Networks.

    Birkan Tunç

    Full Text Available Networks are among the most prevalent formal representations in scientific studies, employed to depict interactions between objects such as molecules, neuronal clusters, or social groups. Studies performed at meso-scale that involve grouping of objects based on their distinctive interaction patterns form one of the main lines of investigation in network science. In a social network, for instance, meso-scale structures can correspond to isolated social groupings or groups of individuals that serve as a communication core. Currently, the research on different meso-scale structures such as community and core-periphery structures has been conducted via independent approaches, which precludes the possibility of an algorithmic design that can handle multiple meso-scale structures and deciding which structure explains the observed data better. In this study, we propose a unified formulation for the algorithmic detection and analysis of different meso-scale structures. This facilitates the investigation of hybrid structures that capture the interplay between multiple meso-scale structures and statistical comparison of competing structures, all of which have been hitherto unavailable. We demonstrate the applicability of the methodology in analyzing the human brain network, by determining the dominant organizational structure (communities of the brain, as well as its auxiliary characteristics (core-periphery.

  2. Onset of meso-scale turbulence in active nematics

    Doostmohammadi, A.; Shendruk, T.N.; Thijssen, K.; Yeomans, J.M.

    2017-01-01

    Meso-scale turbulence is an innate phenomenon, distinct from inertial turbulence, that spontaneously occurs at low Reynolds number in fluidized biological systems. This spatiotemporal disordered flow radically changes nutrient and molecular transport in living fluids and can strongly affect the

  3. Development of a Meso-Scale Fiberoptic Rotation Sensor for a Torsion Actuator.

    Sheng, Jun; Desai, Jaydev P

    2018-01-01

    This paper presents the development of a meso-scale fiberoptic rotation sensor for a shape memory alloy (SMA) torsion actuator for neurosurgical applications. Within the sensor, a rotary head with a reflecting surface is capable of modulating the light intensity collected by optical fibers when the rotary head is coupled to the torsion actuator. The mechanism of light intensity modulation is modeled, followed by experimental model verification. Meanwhile, working performances for different rotary head designs, optical fibers, and fabrication materials are compared. After the calibration of the fiberoptic rotation sensor, the sensor is capable of precisely measuring rotary motion and controlling the SMA torsion actuator with feedback control.

  4. Characterizing the Meso-scale Plasma Flows in Earth's Coupled Magnetosphere-Ionosphere-Thermosphere System

    Gabrielse, C.; Nishimura, T.; Lyons, L. R.; Gallardo-Lacourt, B.; Deng, Y.; McWilliams, K. A.; Ruohoniemi, J. M.

    2017-12-01

    NASA's Heliophysics Decadal Survey put forth several imperative, Key Science Goals. The second goal communicates the urgent need to "Determine the dynamics and coupling of Earth's magnetosphere, ionosphere, and atmosphere and their response to solar and terrestrial inputs...over a range of spatial and temporal scales." Sun-Earth connections (called Space Weather) have strong societal impacts because extreme events can disturb radio communications and satellite operations. The field's current modeling capabilities of such Space Weather phenomena include large-scale, global responses of the Earth's upper atmosphere to various inputs from the Sun, but the meso-scale ( 50-500 km) structures that are much more dynamic and powerful in the coupled system remain uncharacterized. Their influences are thus far poorly understood. We aim to quantify such structures, particularly auroral flows and streamers, in order to create an empirical model of their size, location, speed, and orientation based on activity level (AL index), season, solar cycle (F10.7), interplanetary magnetic field (IMF) inputs, etc. We present a statistical study of meso-scale flow channels in the nightside auroral oval and polar cap using SuperDARN. These results are used to inform global models such as the Global Ionosphere Thermosphere Model (GITM) in order to evaluate the role of meso-scale disturbances on the fully coupled magnetosphere-ionosphere-thermosphere system. Measuring the ionospheric footpoint of magnetospheric fast flows, our analysis technique from the ground also provides a 2D picture of flows and their characteristics during different activity levels that spacecraft alone cannot.

  5. Experimental Study on Meso-Scale Milling Process Using Nanofluid Minimum Quantity Lubrication

    Lee, P. H.; Nam, T. S.; Li, Cheng Jun; Lee, S. W.

    2010-01-01

    This paper present the characteristics of micro- and meso-scale milling processes in which compressed cold air, minimum quantity lubrication (MQL) and MoS 2 nanofluid MQL are used. For process characterization, the micro and meso-scale milling experiments are conducted using desktop meso-scale machine tool system and the surface roughness is measured. The experimental results show that the use of compressed chilly air and nanofluid MQL in the micro- and meso-scale milling processes is effective in improving the surface finish

  6. Green's Kernels and meso-scale approximations in perforated domains

    Maz'ya, Vladimir; Nieves, Michael

    2013-01-01

    There are a wide range of applications in physics and structural mechanics involving domains with singular perturbations of the boundary. Examples include perforated domains and bodies with defects of different types. The accurate direct numerical treatment of such problems remains a challenge. Asymptotic approximations offer an alternative, efficient solution. Green’s function is considered here as the main object of study rather than a tool for generating solutions of specific boundary value problems. The uniformity of the asymptotic approximations is the principal point of attention. We also show substantial links between Green’s functions and solutions of boundary value problems for meso-scale structures. Such systems involve a large number of small inclusions, so that a small parameter, the relative size of an inclusion, may compete with a large parameter, represented as an overall number of inclusions. The main focus of the present text is on two topics: (a) asymptotics of Green’s kernels in domai...

  7. Resolving meso-scale seabed variability using reflection measurements from an autonomous underwater vehicle.

    Holland, Charles W; Nielsen, Peter L; Dettmer, Jan; Dosso, Stan

    2012-02-01

    Seabed geoacoustic variability is driven by geological processes that occur over a wide spectrum of space-time scales. While the acoustics community has some understanding of horizontal fine-scale geoacoustic variability, less than O(10(0)) m, and large-scale variability, greater than O(10(3)) m, there is a paucity of data resolving the geoacoustic meso-scale O(10(0)-10(3)) m. Measurements of the meso-scale along an ostensibly "benign" portion of the outer shelf reveal three classes of variability. The first class was expected and is due to horizontal variability of layer thicknesses: this was the only class that could be directly tied to seismic reflection data. The second class is due to rapid changes in layer properties and/or boundaries, occurring over scales of meters to hundreds of meters. The third class was observed as rapid variations of the angle/frequency dependent reflection coefficient within a single observation and is suggestive of variability at scales of meter or less. Though generally assumed to be negligible in acoustic modeling, the second and third classes are indicative of strong horizontal geoacoustic variability within a given layer. The observations give early insight into possible effects of horizontal geoacoustic variability on long-range acoustic propagation and reverberation. © 2012 Acoustical Society of America

  8. Dynamics of bluff-body-stabilized lean premixed syngas flames in a meso-scale channel

    Lee, Bok Jik

    2016-07-15

    Direct numerical simulations are conducted to investigate the dynamics of lean premixed syngas flames stabilized by a bluff-body in a meso-scale channel at near blow-off conditions, in order to provide fundamental insights into the physical mechanisms responsible for the critical phenomena. Flames in a two-dimensional meso-scale channel with a square flame holder are adopted as the model configuration, and a syngas mixture at an equivalence ratio of 0.5 with the CO:H ratio of 1 is considered. As the inlet velocity is increased, the initially stable steady flames undergo a transition to an unsteady mode of regular asymmetric fluctuation. When the inlet velocity is further increased, the flame is eventually blown off. Between the regular fluctuation mode and blow-off limit, there exists a narrow range of the inlet velocity where the flames exhibit periodic local extinction and recovery. Approaching further to the blow-off limit, the recovery mode fails to occur but the flame survives as a short kernel attached to the base of the bluff-body, until it is completely extinguished as the attached flames are gradually shrunk towards the bluff-body. The results are systematically compared with the hydrogen flame results reported in our earlier study. Examination of the characteristic time scales of relevant processes provided understanding of key mechanisms responsible for the observed differences, thereby allowing improved description of the local extinction and re-ignition dynamics that are critical to flame stabilization.

  9. Prenatal programming of sexual partner preference: the ram model.

    Roselli, C E; Stormshak, F

    2009-03-01

    In our laboratory, the domestic ram is used as an experimental model to study the early programming of neural mechanisms underlying same-sex partner preference. This interest developed from the observation that approximately 8% of domestic rams are sexually attracted to other rams (male-oriented) in contrast to the majority of rams that are attracted to oestrous ewes (female-oriented). One prominent feature of sexual differentiation in many species is the presence of a sexually dimorphic nucleus (SDN) in the preoptic/anterior hypothalamus that is larger in males than in females. Lesion studies in rats and ferrets implicate the SDN in the expression of sexual preferences. We discovered an ovine SDN (oSDN) in the preoptic/anterior hypothalamus that is smaller in male- than in female-oriented rams and similar in size to the oSDN of ewes. Neurones of the oSDN show abundant aromatase expression that is also reduced in male-oriented compared to female-oriented rams. This observation suggests that sexual partner preferences are neurologically hard-wired and could be influenced by hormones. Aromatase-containing neurones constitute a nascent oSDN as early as day 60 of gestation, which becomes sexually dimorphic by day 135 of gestation when it is two-fold larger in males than in females. Exposure of fetal female lambs to exogenous testosterone from days 30-90 of gestation resulted in a masculinised oSDN. These data demonstrate that the oSDN develops prenatally and may influence adult sexual preferences. Surprisingly, inhibition of aromatase activity in the brain of ram foetuses during the critical period did not interfere with defeminisation of adult sexual partner preference or oSDN volume. These results fail to support an essential role for neural aromatase in the sexual differentiation of sheep brain and behaviour. Thus, we propose that oSDN morphology and male-typical partner preferences may instead be programmed through an androgen receptor mechanism not involving

  10. Testicular Damage following Testicular Sperm Retrieval: A Ram Model Study

    Jens Fedder

    2017-01-01

    Full Text Available The aim of this study was to evaluate the possible development of histological abnormalities such as fibrosis and microcalcifications after sperm retrieval in a ram model. Fourteen testicles in nine rams were exposed to open biopsy, multiple TESAs, or TESE, and the remaining four testicles were left unoperated on as controls. Three months after sperm retrieval, the testicles were removed, fixed, and cut into 1/2 cm thick slices and systematically put onto a glass plate exposing macroscopic abnormalities. Tissue from abnormal areas was cut into 3 μm sections and stained for histological evaluation. Pathological abnormalities were observed in testicles exposed to sperm retrieval (≥11 of 14 compared to 0 of 4 control testicles. Testicular damage was found independently of the kind of intervention used. Therefore, cryopreservation of excess sperm should be considered while retrieving sperm.

  11. Performance modeling in critical engineering systems using RAM analysis

    Sharma, Rajiv Kumar; Kumar, Sunand

    2008-01-01

    Reliability, availability and maintainability (RAM) analysis of system is helpful in carrying out design modifications, if any, required to achieve minimum failures or to increase mean time between failures (MTBF) and thus to plan maintainability requirements, optimize reliability and maximize equipment availability. To this effect, the paper presents the application of RAM analysis in a process industry. Markovian approach is used to model the system behavior. For carrying out analysis, transition diagrams for various subsystems are drawn and differential equations associated with them are formulated. After obtaining the steady state solution the corresponding values of reliability and maintainability are estimated at different mission times. The computed results are presented to plant personnel for their active consideration. The results proved helpful to them for analyzing the system behavior and thereby to improve the system performance considerably by adopting and practicing suitable maintenance policies/strategies

  12. Image-based correlation between the meso-scale structure and deformation of closed-cell foam

    Sun, Yongle, E-mail: yongle.sun@manchester.ac.uk [School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom); Zhang, Xun [Henry Moseley X-ray Imaging Facility, School of Materials, The University of Manchester, Upper Brook Street, Manchester M13 9PL (United Kingdom); Shao, Zhushan [School of Civil Engineering, Xi' an University of Architecture & Technology, Xi' an 710055 (China); Li, Q.M. [School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom); State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China)

    2017-03-14

    In the correlation between structural parameters and compressive behaviour of cellular materials, previous studies have mostly focused on averaged structural parameters and bulk material properties for different samples. This study focuses on the meso-scale correlation between structure and deformation in a 2D foam sample generated from a computed tomography slice of Alporas™ foam, for which quasi-static compression was simulated using 2D image-based finite element modelling. First, a comprehensive meso-scale structural characterisation of the 2D foam was carried out to determine the size, aspect ratio, orientation and anisotropy of individual cells, as well as the length, straightness, inclination and thickness of individual cell walls. Measurements were then conducted to obtain the axial distributions of local structural parameters averaged laterally to compression axis. Second, the meso-scale deformation was characterised by cell-wall strain, cell area ratio, digital image correlation strain and local compressive engineering strain. According to the results, the through-width sub-regions over an axial length between the average (lower bound) and the maximum (upper bound) of cell size should be used to characterise the meso-scale heterogeneity of the cell structure and deformation. It was found that the first crush band forms in a sub-region where the ratio of cell-wall thickness to cell-wall length is a minimum, in which the collapse deformation is dominated by the plastic bending and buckling of cell walls. Other morphological parameters have secondary effect on the initiation of crush band in the 2D foam. The finding of this study suggests that the measurement of local structural properties is crucial for the identification of the “weakest” region which determines the initiation of collapse and hence the corresponding collapse load of a heterogeneous cellular material.

  13. Image-based correlation between the meso-scale structure and deformation of closed-cell foam

    Sun, Yongle; Zhang, Xun; Shao, Zhushan; Li, Q.M.

    2017-01-01

    In the correlation between structural parameters and compressive behaviour of cellular materials, previous studies have mostly focused on averaged structural parameters and bulk material properties for different samples. This study focuses on the meso-scale correlation between structure and deformation in a 2D foam sample generated from a computed tomography slice of Alporas™ foam, for which quasi-static compression was simulated using 2D image-based finite element modelling. First, a comprehensive meso-scale structural characterisation of the 2D foam was carried out to determine the size, aspect ratio, orientation and anisotropy of individual cells, as well as the length, straightness, inclination and thickness of individual cell walls. Measurements were then conducted to obtain the axial distributions of local structural parameters averaged laterally to compression axis. Second, the meso-scale deformation was characterised by cell-wall strain, cell area ratio, digital image correlation strain and local compressive engineering strain. According to the results, the through-width sub-regions over an axial length between the average (lower bound) and the maximum (upper bound) of cell size should be used to characterise the meso-scale heterogeneity of the cell structure and deformation. It was found that the first crush band forms in a sub-region where the ratio of cell-wall thickness to cell-wall length is a minimum, in which the collapse deformation is dominated by the plastic bending and buckling of cell walls. Other morphological parameters have secondary effect on the initiation of crush band in the 2D foam. The finding of this study suggests that the measurement of local structural properties is crucial for the identification of the “weakest” region which determines the initiation of collapse and hence the corresponding collapse load of a heterogeneous cellular material.

  14. MICRO-SEISMOMETERS VIA ADVANCED MESO-SCALE FABRICATION

    Garcia, Caesar A; Onaran, Guclu; Avenson, Brad; Hall, Neal

    2014-11-07

    The Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) seek revolutionary sensing innovations for the monitoring of nuclear detonations. Performance specifications are to be consistent with those obtainable by only an elite few products available today, but with orders of magnitude reduction in size, weight, power, and cost. The proposed commercial innovation calls upon several technologies including the combination of meso-scale fabrication and assembly, photonics-based displacement / motion detection methods, and the use of digital control electronics . Early Phase II development has demonstrated verified and repeatable sub 2ng noise floor from 3Hz to 100Hz, compact integration of 3-axis prototypes, and robust deployment exercises. Ongoing developments are focusing on low frequency challenges, low power consumption, ultra-miniature size, and low cross axis sensitivity. We are also addressing the rigorous set of specifications required for repeatable and reliable long-term explosion monitoring, including thermal stability, reduced recovery time from mass re-centering and large mechanical shocks, sensitivity stability, and transportability. Successful implementation will result in small, hand-held demonstration units with the ability to address national security needs of the DOE/NNSA. Additional applications envisioned include military/defense, scientific instrumentation, oil and gas exploration, inertial navigation, and civil infrastructure monitoring.

  15. Flame dynamics of a meso-scale heat recirculating combustor

    Vijayan, V.; Gupta, A.K. [Department of Mechanical Engineering, University of Maryland, College Park, MD 20742 (United States)

    2010-12-15

    The dynamics of premixed propane-air flame in a meso-scale ceramic combustor has been examined here. The flame characteristics in the combustor were examined by measuring the acoustic emissions and preheat temperatures together with high-speed cinematography. For the small-scale combustor, the volume to surface area ratio is small and hence the walls have significant effect on the global flame structure, flame location and flame dynamics. In addition to the flame-wall thermal coupling there is a coupling between flame and acoustics in the case of confined flames. Flame-wall thermal interactions lead to low frequency flame fluctuations ({proportional_to}100 Hz) depending upon the thermal response of the wall. However, the flame-acoustic interactions can result in a wide range of flame fluctuations ranging from few hundred Hz to few kHz. Wall temperature distribution is one of the factors that control the amount of reactant preheating which in turn effects the location of flame stabilization. Acoustic emission signals and high-speed flame imaging confirmed that for the present case flame-acoustic interactions have more significant effect on flame dynamics. Based on the acoustic emissions, five different flame regimes have been identified; whistling/harmonic mode, rich instability mode, lean instability mode, silent mode and pulsating flame mode. (author)

  16. Comparison of Hourly Solar Radiation from a Ground–Based Station, Remote Sensing and Weather Forecast Models at a Coastal Site of South Italy (Lamezia Terme)

    Feudo, Teresa Lo; Avolio, Elenio; Gullì, Daniel

    2015-01-01

    The solar radiation is a critical input parameter when working with solar energy and radiation dependent surface processes. In this study, we present preliminary results from an inter-comparison between hourly values from a pyranometer, MSG-SEVIRI sensor and two meso-scale models, WRF and RAMS, i...

  17. Evaluation of planetary boundary layer schemes in meso-scale simulations above the North and Baltic Sea

    Wurps, Hauke; Tambke, Jens; Steinfeld, Gerald; von Bremen, Lueder

    2014-05-01

    The development and design of wind energy converters for offshore wind farms require profound knowledge of the wind profile in the lower atmosphere. Especially an accurate and reliable estimation of turbulence, shear and veer are necessary for the prediction of energy production and loads. Currently existing wind energy turbines in the North Sea have hub heights of around 90 m and upper tip heights around 150 m, which is already higher than the highest measurement masts (e.g. FINO1: 103 m). The next generation of wind turbines will clearly outrange these altitudes, so the interest is to examine the atmosphere's properties above the North Sea up to 300 m. Therefore, besides the Prandtl layer also the Ekman layer has to be taken into account, which implies that changes of the wind direction with height become more relevant. For this investigation we use the Weather Research and Forecasting Model (WRF), a meso-scale numerical weather prediction system. In this study we compare different planetary boundary layer (PBL) schemes (MYJ, MYNN, QNSE) with the same high quality input from ECMWF used as boundary conditions (ERA-Interim). It was found in previous studies that the quality of the boundary conditions is crucially important for the accuracy of comparisons between different PBL schemes. This is due to the fact that the major source of meso-scale simulation errors is introduced by the driving boundary conditions and not by the different schemes of the meso-scale model itself. Hence, small differences in results from different PBL schemes can be distorted arbitrarily by coarse input data. For instance, ERA-Interim data leads to meso-scale RMSE values of 1.4 m/s at 100 m height above sea surface with mean wind speeds around 10 m/s, whereas other Reanalysis products lead to RMSEs larger than 2 m/s. Second, we compare our simulations to operational NWP results from the COSMO model (run by the DWD). In addition to the wind profile, also the turbulent kinetic energy (TKE

  18. Meso-scale magnetic signatures for nuclear reactor steel irradiation embrittlement monitoring

    Suter, J. D., E-mail: pradeep.ramuhalli@pnnl.gov; Ramuhalli, P., E-mail: pradeep.ramuhalli@pnnl.gov; Hu, S.; Li, Y.; Jiang, W.; Edwards, D. J.; Schemer-Kohrn, A. L.; Johnson, B. R. [Pacific Northwest National Laboratory, 902 Battelle Blvd, Richland, WA 99352 (United States); McCloy, J. S., E-mail: john.mccloy@wsu.edu; Xu, K., E-mail: john.mccloy@wsu.edu [Washington State University, PO Box 642920, Pullman, WA 99164 (United States)

    2015-03-31

    Verifying the structural integrity of passive components in light water and advanced reactors will be necessary to ensure safe, long-term operations of the existing U.S. nuclear fleet. This objective can be achieved through nondestructive condition monitoring techniques, which can be integrated with plant operations to quantify the “state of health” of structural materials in real-time. While nondestructive methods for monitoring many classes of degradation (such as fatigue or stress corrosion cracking) are relatively advanced, this is not the case for degradation caused by irradiation. The development of nondestructive evaluation technologies for these types of degradation will require advanced materials characterization techniques and tools that enable comprehensive understanding of nuclear reactor material microstructural and behavioral changes under extreme operating environments. Irradiation-induced degradation of reactor steels causes changes in their microstructure that impacts their micro-magnetic properties. In this paper, we describe preliminary results of integrating advanced material characterization techniques with meso-scale computational models. In the future, this will help to provide an interpretive understanding of the state of degradation in structural materials. Microstructural data are presented from monocrystalline Fe and are correlated with variable-field magnetic force microscopy and micro-magnetic measurements. Ongoing research is focused on extending the measurements and models on thin films to gain insights into the structural state of irradiated materials and the resulting impact on magnetic properties. Preliminary conclusions from these correlations are presented, and next steps described.

  19. A Simplified Model of an Offset Ram Press for Sunflower Oil ...

    This paper presents the theoretical analysis of a simplified model of a ram press. The design of the ram press is based on the classical slider-crank mechanism. A force analysis of the press was performed for several successive positions of the driving lever (handle) and for a range of values of certain dimensionless ...

  20. An interview with James Wilbur, Ph.D. General Manager, Life Sciences, Meso Scale Discovery.

    Wilbur, James

    2004-06-01

    James L. Wilbur, Ph.D. received a Bachelor's degree from the University of California, San Diego and a Ph.D. in Chemistry from Stanford University. After completing an NIH Postdoctoral Fellowship with Professor George M. Whitesides in the Department of Chemistry at Harvard University, he joined IGEN International, Inc., where he held a variety of positions in Research and Development. During that time, he was part of the team that developed the core technology and products for Meso Scale Discovery. He assumed his current position in 2001 when Meso Scale Discovery launched the products discussed here.

  1. Development of an Efficient Meso- scale Multi-phase Flow Solver in Nuclear Applications

    Lee, Taehun [City Univ. (CUNY), NY (United States)

    2015-10-20

    The proposed research aims at formulating a predictive high-order Lattice Boltzmann Equation for multi-phase flows relevant to nuclear energy related application - namely, saturated and sub-cooled boiling in reactors, and liquid- liquid mixing and extraction for fuel cycle separation. An efficient flow solver will be developed based on the Finite Element based Lattice Boltzmann Method (FE- LBM), accounting for phase-change heat transfer and capable of treating multiple phases over length scales from the submicron to the meter. A thermal LBM will be developed in order to handle adjustable Prandtl number, arbitrary specific heat ratio, a wide range of temperature variations, better numerical stability during liquid-vapor phase change, and full thermo-hydrodynamic consistency. Two-phase FE-LBM will be extended to liquid–liquid–gas multi-phase flows for application to high-fidelity simulations building up from the meso-scale up to the equipment sub-component scale. While several relevant applications exist, the initial applications for demonstration of the efficient methods to be developed as part of this project include numerical investigations of Critical Heat Flux (CHF) phenomena in nuclear reactor fuel bundles, and liquid-liquid mixing and interfacial area generation for liquid-liquid separations. In addition, targeted experiments will be conducted for validation of this advanced multi-phase model.

  2. Improvement of Hydrological Simulations by Applying Daily Precipitation Interpolation Schemes in Meso-Scale Catchments

    Mateusz Szcześniak

    2015-02-01

    Full Text Available Ground-based precipitation data are still the dominant input type for hydrological models. Spatial variability in precipitation can be represented by spatially interpolating gauge data using various techniques. In this study, the effect of daily precipitation interpolation methods on discharge simulations using the semi-distributed SWAT (Soil and Water Assessment Tool model over a 30-year period is examined. The study was carried out in 11 meso-scale (119–3935 km2 sub-catchments lying in the Sulejów reservoir catchment in central Poland. Four methods were tested: the default SWAT method (Def based on the Nearest Neighbour technique, Thiessen Polygons (TP, Inverse Distance Weighted (IDW and Ordinary Kriging (OK. =The evaluation of methods was performed using a semi-automated calibration program SUFI-2 (Sequential Uncertainty Fitting Procedure Version 2 with two objective functions: Nash-Sutcliffe Efficiency (NSE and the adjusted R2 coefficient (bR2. The results show that: (1 the most complex OK method outperformed other methods in terms of NSE; and (2 OK, IDW, and TP outperformed Def in terms of bR2. The median difference in daily/monthly NSE between OK and Def/TP/IDW calculated across all catchments ranged between 0.05 and 0.15, while the median difference between TP/IDW/OK and Def ranged between 0.05 and 0.07. The differences between pairs of interpolation methods were, however, spatially variable and a part of this variability was attributed to catchment properties: catchments characterised by low station density and low coefficient of variation of daily flows experienced more pronounced improvement resulting from using interpolation methods. Methods providing higher precipitation estimates often resulted in a better model performance. The implication from this study is that appropriate consideration of spatial precipitation variability (often neglected by model users that can be achieved using relatively simple interpolation methods can

  3. RAMS - Regional Atmospheric Modelling System for decision support system SWD-WJ/RODOS

    Borysiewicz, M.; Potemski, S.; Galkowski, A.; Zelazinska, B.

    1999-01-01

    Presented is report aimed at implementation of RAMS (Regional Atmospheric Modelling System) to the decision support system SWD-WJ/RODOS. A comprehensive analysis has been made of different meteorological codes, both local and regional. RAMS code, developed at Colorado State University and Aster Division of Mission Research Corporation, has been selected for reasons presented in this report. RAMS has been adjusted to Polish conditions. Necessary data as topography and surface characteristics (roughness, land percentage, see surface temperature, land cover, soil type, etc.) have been obtained from US Geological Survey and NOAA ARL, Washington DC. Numerical tests have been performed on two nested grids, one covering large part of Europe, the other one covering Polish territory. RAMS requires meteorological input from global model and/or from local meteorological stations. Use has been made of data from the Institute of Meteorology and Water Management, Warsaw, and from European Center for Medium Range Forecast (ECMWF, Reading). For the later RAMS acted operationally what means that global data were delivered every 12 h from Reading via Internet to Swierk and subsequently 12 h weather forecast was calculated by RAMS. In a separate experiment RAMS forecast has been benchmarked with a forecast by UMPL code operated routinely at Warsaw University. Results of all of those test are presented in the report. Finally, some suggestions concerning further work has been put forward. (author)

  4. Proposed Model for Integrating RAMS Method in the Design Process in Construction

    Saad Al-Jibouri

    2010-05-01

    Full Text Available There is a growing trend in the Netherlands for outsourcing public construction activities to the private sector through the use of integrated contracts. There is also an increasing emphasis from public clients on the use of RAMS and life cycle costing (LCC in the design process of infrastructural projects to improve the performance of designed systems and optimize the project cost. RAMS is an acronym for `reliability, availability, maintainability and safety' and represents a collection of techniques to provide predictions of the performance targets of the required system. Increasingly, RAMS targets are being specified in invitation to tender or contract documents and the parties responsible for the design are required to provide evidence of its application in their design. Recent evidence from practice, complemented with a literature study, has shown that the knowledge and application of RAMS in infrastructural designs are in their infancy compared with other industrial sectors and many designers in construction do not have the necessary knowledge and experience to apply it. This paper describes a proposed model for the integration of RAMS and LCC into the design process in construction. A variation of the model for the application of RAMS in `design, build, finance and maintain' (DBFM contracts that include maintenance requirements is also proposed. The two models involve providing guidelines to simplify the application of RAMs by the designers. The model has been validated for its practicality and usefulness during a workshop by experienced designers. DOI: 10.3763/aedm.2008.0100 Published in the Journal AEDM - Volume 5, Number 4, 2009 , pp. 179-192(14

  5. A CFD Analysis of The Performance of Pin-Fin Laminar Flow Micro/Meso Scale Heat Exchangers

    Dimas, Sotirios

    2005-01-01

    A full three dimensional computational study was carried out using a finite-volume based solver for analyzing the performance of pin-fin based micro/meso scale heat exchangers with air as the working fluid...

  6. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  7. Information processing in micro and meso-scale neural circuits during normal and disease states

    Luongo, Francisco

    Neural computation can occur at multiple spatial and temporal timescales. The sum total of all of these processes is to guide optimal behaviors within the context of the constraints imposed by the physical world. How the circuits of the brain achieves this goal represents a central question in systems neuroscience. Here I explore the many ways in which the circuits of the brain can process information at both the micro and meso scale. Understanding the way information is represented and processed in the brain could shed light on the neuropathology underlying complex neuropsychiatric diseases such as autism and schizophrenia. Chapter 2 establishes an experimental paradigm for assaying patterns of microcircuit activity and examines the role of dopaminergic modulation on prefrontal microcircuits. We find that dopamine type 2 (D2) receptor activation results in an increase in spontaneous activity while dopamine type 1 (D1) activation does not. Chapter 3 of this dissertation presents a study that illustrates how cholingergic activation normally produces what has been suggested as a neural substrate of attention; pairwise decorrelation in microcircuit activity. This study also shows that in two etiologicall distinct mouse models of autism, FMR1 knockout mice and Valproic Acid exposed mice, this ability to decorrelate in the presence of cholinergic activation is lost. This represents a putative microcircuit level biomarker of autism. Chapter 4 examines the structure/function relationship within the prefrontal microcircuit. Spontaneous activity in prefrontal microcircuits is shown to be organized according to a small world architecture. Interestingly, this architecture is important for one concrete function of neuronal microcircuits; the ability to produce temporally stereotyped patterns of activation. In the final chapter, we identify subnetworks in chronic intracranial electrocorticographic (ECoG) recordings using pairwise electrode coherence and dimensionality reduction

  8. TiO$_2$-based Memristors and ReRAM: Materials, Mechanisms and Models (a Review)

    Gale, Ella

    2016-01-01

    The memristor is the fundamental non-linear circuit element, with uses in computing and computer memory. ReRAM (Resistive Random Access Memory) is a resistive switching memory proposed as a non-volatile memory. In this review we shall summarise the state of the art for these closely-related fields, concentrating on titanium dioxide, the well-utilised and archetypal material for both. We shall cover material properties, switching mechanisms and models to demonstrate what ReRAM and memristor sc...

  9. TiO2-based memristors and ReRAM: materials, mechanisms and models (a review)

    Gale, Ella

    2014-10-01

    The memristor is the fundamental nonlinear circuit element, with uses in computing and computer memory. Resistive Random Access Memory (ReRAM) is a resistive switching memory proposed as a non-volatile memory. In this review we shall summarize the state of the art for these closely-related fields, concentrating on titanium dioxide, the well-utilized and archetypal material for both. We shall cover material properties, switching mechanisms and models to demonstrate what ReRAM and memristor scientists can learn from each other and examine the outlook for these technologies.

  10. TiO2-based memristors and ReRAM: materials, mechanisms and models (a review)

    Gale, Ella

    2014-01-01

    The memristor is the fundamental nonlinear circuit element, with uses in computing and computer memory. Resistive Random Access Memory (ReRAM) is a resistive switching memory proposed as a non-volatile memory. In this review we shall summarize the state of the art for these closely-related fields, concentrating on titanium dioxide, the well-utilized and archetypal material for both. We shall cover material properties, switching mechanisms and models to demonstrate what ReRAM and memristor scientists can learn from each other and examine the outlook for these technologies. (invited review)

  11. Meso-scale wrinkled coatings to improve heat transfers of surfaces facing ambient air

    Kakiuchida, Hiroshi; Tajiri, Koji; Tazawa, Masato; Yoshimura, Kazuki; Shimono, Kazuaki; Nakagawa, Yukio; Takahashi, Kazuhiro; Fujita, Keisuke; Myoko, Masumi

    2015-01-01

    Meso-scale (micrometer-to submillimeter-scale) wrinkled surfaces coated on steel sheets used in outdoor storage and transport facilities for industrial low-temperature liquids were discovered to efficiently increase convective heat transfer between ambient air and the surface. The radiative and convective heat transfer coefficients of various wrinkled surfaces, which were formed by coating steel sheets with several types of shrinkable paints, were examined. The convective heat transfer coefficient of a surface colder than ambient air monotonically changed with average height difference and interval distance of the wrinkle undulation, where the proportions were 0.0254 and 0.0054 W/m 2 /K/μm, respectively. With this wrinkled coating, users can lower the possibility of condensation and reduce rust and maintenance cost of facilities for industrial low-temperature liquids. From the point of view of manufacturers, this coating method can be easily adapted to conventional manufacturing processes. - Highlights: • Various wrinkled surfaces were fabricated by a practical process. • Topographical effect on convection was parameterized separately from radiation. • Meso-scale wrinkled coatings increased convective heat transfer with ambient air. • Maintenance cost of outdoor steel sheets due to condensation can be reduced

  12. Meso-Scale Finite Element Analysis of Mechanical Behavior of 3D Braided Composites Subjected to Biaxial Tension Loadings

    Zhang, Chao; Curiel-Sosa, Jose L.; Bui, Tinh Quoc

    2018-04-01

    In many engineering applications, 3D braided composites are designed for primary loading-bearing structures, and they are frequently subjected to multi-axial loading conditions during service. In this paper, a unit-cell based finite element model is developed for assessment of mechanical behavior of 3D braided composites under different biaxial tension loadings. To predict the damage initiation and evolution of braiding yarns and matrix in the unit-cell, we thus propose an anisotropic damage model based on Murakami damage theory in conjunction with Hashin failure criteria and maximum stress criteria. To attain exact stress ratio, force loading mode of periodic boundary conditions which never been attempted before is first executed to the unit-cell model to apply the biaxial tension loadings. The biaxial mechanical behaviors, such as the stress distribution, tensile modulus and tensile strength are analyzed and discussed. The damage development of 3D braided composites under typical biaxial tension loadings is simulated and the damage mechanisms are revealed in the simulation process. The present study generally provides a new reference to the meso-scale finite element analysis (FEA) of multi-axial mechanical behavior of other textile composites.

  13. Design and fabrication of a meso-scale stirling engine and combustor.

    Echekki, Tarek (Sandia National Laboratories, Livermore, CA); Haroldsen, Brent L. (Sandia National Laboratories, Livermore, CA); Krafcik, Karen L. (Sandia National Laboratories, Livermore, CA); Morales, Alfredo Martin (Sandia National Laboratories, Livermore, CA); Mills, Bernice E. (Sandia National Laboratories, Livermore, CA); Liu, Shiling (Sandia National Laboratories, Livermore, CA); Lee, Jeremiah C. (Sandia National Laboratories, Livermore, CA); Karpetis, Adionos N. (Sandia National Laboratories, Livermore, CA); Chen, Jacqueline H. (Sandia National Laboratories, Livermore, CA); Ceremuga, Joseph T. (Sandia National Laboratories, Livermore, CA); Raber, Thomas N. (Sandia National Laboratories, Livermore, CA); Hekmuuaty, Michelle A. (Sandia National Laboratories, Livermore, CA)

    2005-05-01

    Power sources capable of supplying tens of watts are needed for a wide variety of applications including portable electronics, sensors, micro aerial vehicles, and mini-robotics systems. The utility of these devices is often limited by the energy and power density capabilities of batteries. A small combustion engine using liquid hydrocarbon fuel could potentially increase both power and energy density by an order of magnitude or more. This report describes initial development work on a meso-scale external combustion engine based on the Stirling cycle. Although other engine designs perform better at macro-scales, we believe the Stirling engine cycle is better suited to small-scale applications. The ideal Stirling cycle requires efficient heat transfer. Consequently, unlike other thermodynamic cycles, the high heat transfer rates that are inherent with miniature devices are an advantage for the Stirling cycle. Furthermore, since the Stirling engine uses external combustion, the combustor and engine can be scaled and optimized semi-independently. Continuous combustion minimizes issues with flame initiation and propagation. It also allows consideration of a variety of techniques to promote combustion that would be difficult in a miniature internal combustion engine. The project included design and fabrication of both the engine and the combustor. Two engine designs were developed. The first used a cylindrical piston design fabricated with conventional machining processes. The second design, based on the Wankel rotor geometry, was fabricated by through-mold electroforming of nickel in SU8 and LIGA micromolds. These technologies provided the requisite precision and tight tolerances needed for efficient micro-engine operation. Electroformed nickel is ideal for micro-engine applications because of its high strength and ductility. A rotary geometry was chosen because its planar geometry was more compatible with the fabrication process. SU8 lithography provided rapid

  14. Short-term meso-scale variability of mesozooplankton communities in a coastal upwelling system (NW Spain)

    Roura, Álvaro; Álvarez-Salgado, Xosé A.; González, Ángel F.; Gregori, María; Rosón, Gabriel; Guerra, Ángel

    2013-02-01

    The short-term, meso-scale variability of the mesozooplankton community present in the coastal upwelling system of the Ría de Vigo (NW Spain) has been analysed. Three well-defined communities were identified: coastal, frontal and oceanic, according to their holoplankton-meroplankton ratio, richness, and total abundance. These communities changed from summer to autumn due to a shift from downwelling to upwelling-favourable conditions coupled with taxa dependent changes in life strategies. Relationships between the resemblance matrix of mesozooplankton and the resemblance matrices of meteorologic, hydrographic and community-derived biotic variables were determined with distance-based linear models (DistLM, 18 variables), showing an increasing amount of explained variability of 6%, 16.1% and 54.5%, respectively. A simplified model revealed that the variability found in the resemblance matrix of mesozooplankton was mainly described by the holoplankton-meroplankton ratio, the total abundance, the influence of lunar cycles, the upwelling index and the richness; altogether accounting for 64% of the total variability. The largest variability of the mesozooplankton resemblance matrix (39.6%) is accounted by the holoplankton-meroplankton ratio, a simple index that describes appropriately the coastal-ocean gradient. The communities described herein kept their integrity in the studied upwelling and downwelling episodes in spite of the highly advective environment off the Ría de Vigo, presumably due to behavioural changes in the vertical position of the zooplankton.

  15. Study of the Arrangement Effect of Units on the Shear Strength Masonry Walls in Meso-Scale

    M. Sepehrinia

    2016-12-01

    Full Text Available Masonry is one of the oldest building materials which have been used in most heritage structures and new construction. In this study by using a meso-scale finite element model, the behavior of masonry walls is investigated under monotonic loading by Abaqus software. The most important factor in determining the behavior of masonry structures is discontinuity joints which are interface between unit and mortar. In most previous studies cohesive element is used for modeling of interface element. But in this study, by ignoring cohesive elements that represents the interface element between unit and mortar in masonry structures, it can be seen that while reducing the computational requirements, the results are in good agreement with experimental studies. Another important factor in the behavior of masonry walls is the arrangement of masonry units. In this study the overlapping effect of rows of units on the shear strength and failure mode of masonry walls have been investigated. As a result, it was observed that by increasing overlap, shear resistance of masonry walls increased.

  16. Meso-Scale Progressive Damage Behavior Characterization of Triaxial Braided Composites under Quasi-Static Tensile Load

    Ren, Yiru; Zhang, Songjun; Jiang, Hongyong; Xiang, Jinwu

    2018-04-01

    Based on continuum damage mechanics (CDM), a sophisticated 3D meso-scale finite element (FE) model is proposed to characterize the progressive damage behavior of 2D Triaxial Braided Composites (2DTBC) with 60° braiding angle under quasi-static tensile load. The modified Von Mises strength criterion and 3D Hashin failure criterion are used to predict the damage initiation of the pure matrix and fiber tows. A combining interface damage and friction constitutive model is applied to predict the interface damage behavior. Murakami-Ohno stiffness degradation scheme is employed to predict the damage evolution process of each constituent. Coupling with the ordinary and translational symmetry boundary conditions, the tensile elastic response including tensile strength and failure strain of 2DTBC are in good agreement with the available experiment data. The numerical results show that the main failure modes of the composites under axial tensile load are pure matrix cracking, fiber and matrix tension failure in bias fiber tows, matrix tension failure in axial fiber tows and interface debonding; the main failure modes of the composites subjected to transverse tensile load are free-edge effect, matrix tension failure in bias fiber tows and interface debonding.

  17. Reliability and Maintainability model (RAM) user and maintenance manual. Part 2

    Ebeling, Charles E.

    1995-01-01

    This report documents the procedures for utilizing and maintaining the Reliability and Maintainability Model (RAM) developed by the University of Dayton for the NASA Langley Research Center (LaRC). The RAM model predicts reliability and maintainability (R&M) parameters for conceptual space vehicles using parametric relationships between vehicle design and performance characteristics and subsystem mean time between maintenance actions (MTBM) and manhours per maintenance action (MH/MA). These parametric relationships were developed using aircraft R&M data from over thirty different military aircraft of all types. This report describes the general methodology used within the model, the execution and computational sequence, the input screens and data, the output displays and reports, and study analyses and procedures. A source listing is provided.

  18. RAMS Model for Terrestrial Pathways Version 3. 0 (for microcomputers). Model-Simulation

    Niebla, E.

    1989-01-01

    The RAMS Model for Terrestrial Pathways is a computer program for calculation of numeric criteria for land application and distribution and marketing of sludges under the sewage-sludge regulations at 40 CFR Part 503. The risk-assessment models covered assume that municipal sludge with specified characteristics is spread across a defined area of ground at a known rate once each year for a given number of years. Risks associated with direct land application of sludge applied after distribution and marketing are both calculated. The computer program calculates the maximum annual loading of contaminants that can be land applied and still meet the risk criteria specified as input. Software Description: The program is written in the Turbo/Basic programming language for implementation on IBM PC/AT or compatible machines using DOS 3.0 or higher operating system. Minimum core storage is 512K.

  19. Improved analysis and visualization of friction loop data: unraveling the energy dissipation of meso-scale stick-slip motion

    Kokorian, Jaap; Merlijn van Spengen, W.

    2017-11-01

    In this paper we demonstrate a new method for analyzing and visualizing friction force measurements of meso-scale stick-slip motion, and introduce a method for extracting two separate dissipative energy components. Using a microelectromechanical system tribometer, we execute 2 million reciprocating sliding cycles, during which we measure the static friction force with a resolution of \

  20. Diatoms as a fingerprint of sub-catchment contributions to meso-scale catchment runoff

    Klaus, Julian; Wetzel, Carlos E.; Martinez-Carreras, Nuria; Ector, Luc; Pfister, Laurent

    2014-05-01

    In recent years, calls were made for new eco-hydrological approaches to improve understanding of hydrological processes. Recently diatoms, one of the most common and diverse algal groups that can be easily transported by flowing water due to their small size (~10-200 µm), were used to detect the onset and cessation of surface runoff to small headwater streams and constrain isotopic and hydro-chemical hydrograph separation methods. While the method showed its potential in the hillslope-riparian zone-stream continuum of headwater catchments, the behavior of diatoms and their use for hydrological process research in meso-scale catchments remains uncertain. Diatoms can be a valuable support for isotope and hydro-chemical tracer methods when these become ambiguous with increasing scale. Distribution and abundance of diatom species is controlled by various environmental factors (pH, soil type, moisture conditions, exposition to sunlight, etc.). We therefore hypothesize that species abundance and composition can be used as a proxy for source areas. This presentation evaluates the potential for diatoms to trace source-areas in the nested meso-scale Attert River basin (250 km2, Luxembourg, Europe). We sampled diatom populations in streamwater during one flood event in Fall 2011 in 6 sub-catchments and the basin outlet - 17 to 28 samples/catchment for the different sampling locations. Diatoms were classified and counted in every individual sample. In total more than 400 diatom species were detected. Ordination analysis revealed a clear distinction between communities sampled in different sub-catchments. The species composition at the catchment outlet reflects a mixing of the diatom composition originating from different sub-catchments. This data suggests that diatoms indeed can reflect the geographic origin of stream water at the catchment outlet. The centroids of the ordination analysis might be linked to the physiographic characteristics (geology and land use) of the

  1. Utilizing the meso-scale grain boundary stress to estimate the onset of delamination in 2099-T861 aluminium–lithium

    McDonald, Russell J; Beaudoin, Armand J

    2010-01-01

    Aluminium–lithium alloys provide a lower density and higher stiffness alternative to other high strength aluminium alloys. However, many Al–Li alloys exhibit a non-traditional failure mechanism called delamination, which refers to the failure of the elongated grain boundary interface. In this investigation, delaminations were observed after cyclic deformation of both uniaxial and torsion experiments. A cyclically stable rate-independent crystal plasticity framework with kinematic hardening was developed to address many experimental trends of stabilized cyclic plasticity. Utilizing this framework, meso-scale grain boundary interface stresses were estimated with uniform deformation and bi-crystal models. These models are computationally amenable to investigate both orientation dependence and the statistical nature of the grain boundary stresses for a given bulk texture and nominal loading. A coupled shear-normal Findley-based damage parameter was formulated to quantitatively characterize the nucleation of delamination consistently with experimental trends

  2. RAMS - Regional Atmospheric Modelling System for decision support system SWD-WJ/RODOS[34 refs, 26 figs, 4 tabs]; RAMS - numeryczne prognozowanie pogody dla systemu wspomagania decyzji SWD-WJ/RODOS

    Borysiewicz, M; Potemski, S [Inst. of Atomic Energy, Otwock-Swierk (Poland); Galkowski, A [Inst. Fizyki Plazmy i Laserowej Mikrosyntezy, Warsaw (Poland); Zelazinska, B [Inst. of Geophysics, Warsaw University, Warsaw (Poland)

    1999-07-01

    Presented is report aimed at implementation of RAMS (Regional Atmospheric Modelling System) to the decision support system SWD-WJ/RODOS. A comprehensive analysis has been made of different meteorological codes, both local and regional. RAMS code, developed at Colorado State University and Aster Division of Mission Research Corporation, has been selected for reasons presented in this report. RAMS has been adjusted to Polish conditions. Necessary data as topography and surface characteristics (roughness, land percentage, see surface temperature, land cover, soil type, etc.) have been obtained from US Geological Survey and NOAA ARL, Washington DC. Numerical tests have been performed on two nested grids, one covering large part of Europe, the other one covering Polish territory. RAMS requires meteorological input from global model and/or from local meteorological stations. Use has been made of data from the Institute of Meteorology and Water Management, Warsaw, and from European Center for Medium Range Forecast (ECMWF, Reading). For the later RAMS acted operationally what means that global data were delivered every 12 h from Reading via Internet to Swierk and subsequently 12 h weather forecast was calculated by RAMS. In a separate experiment RAMS forecast has been benchmarked with a forecast by UMPL code operated routinely at Warsaw University. Results of all of those test are presented in the report. Finally, some suggestions concerning further work has been put forward. (author)

  3. Compression instrument for tissue experiments (cite) at the meso-scale: device validation - biomed 2011.

    Evans, Douglas W; Rajagopalan, Padma; Devita, Raffaella; Sparks, Jessica L

    2011-01-01

    Liver sinusoidal endothelial cells (LSECs) are the primary site of numerous transport and exchange processes essential for liver function. LSECs rest on a sparse extracellular matrix layer housed in the space of Disse, a 0.5-1LSECs from hepatocytes. To develop bioengineered liver tissue constructs, it is important to understand the mechanical interactions among LSECs, hepatocytes, and the extracellular matrix in the space of Disse. Currently the mechanical properties of space of Disse matrix are not well understood. The objective of this study was to develop and validate a device for performing mechanical tests at the meso-scale (100nm-100m), to enable novel matrix characterization within the space of Disse. The device utilizes a glass micro-spherical indentor attached to a cantilever made from a fiber optic cable. The 3-axis translation table used to bring the specimen in contact with the indentor and deform the cantilever. A position detector monitors the location of a laser passing through the cantilever and allows for the calculation of subsequent tissue deformation. The design allows micro-newton and nano-newton stress-strain tissue behavior to be quantified. To validate the device accuracy, 11 samples of silicon rubber in two formulations were tested to experimentally confirm their Young's moduli. Prior macroscopic unconfined compression tests determined the formulations of EcoFlex030 (n-6) and EcoFlex010 (n-5) to posses Young's moduli of 92.67+-6.22 and 43.10+-3.29 kPa respectively. Optical measurements taken utilizing CITE's position control and fiber optic cantilever found the moduli to be 106.4 kPa and 47.82 kPa.

  4. The Heterotrophic Bacterial Response During the Meso-scale Southern Ocean Iron Experiment (SOFeX)

    Oliver, J. L.; Barber, R. T.; Ducklow, H. W.

    2002-12-01

    Previous meso-scale iron enrichments have demonstrated the stimulatory effect of iron on primary productivity and the accelerated flow of carbon into the surface ocean foodweb. In stratified waters, heterotrophic activity can work against carbon export by remineralizing POC and/or DOC back to CO2, effectively slowing the biological pump. To assess the response of heterotrophic activity to iron enrichment, we measured heterotrophic bacterial production and abundance during the Southern Ocean Iron Experiment (SOFeX). Heterotrophic bacterial processes primarily affect the latter of the two carbon export mechanisms, removal of DOC to the deep ocean. Heterotrophic bacterial production (BP), measured via tritiated thymidine (3H-TdR) and leucine (3H-Leu) incorporation, increased ~40% over the 18-d observation period in iron fertilized waters south of the Polar Front (South Patch). Also, South Patch BP was 61% higher than in the surrounding unfertilized waters. Abundance, measured by flow cytometry (FCM) and acridine orange direct counts (AODC), also increased in the South Patch from 3 to 5 x 108 cells liter-1, a 70% increase. Bacterial biomass increased from ~3.6 to 6.3 μg C liter-1, a clear indication that production rates exceeded removal rates (bactivory, viral lysis) over the course of 18 days. Biomass within the fertilized patch was 11% higher than in surrounding unfertilized waters reflecting a similar trend. This pattern is in contrast to SOIREE where no accumulation of biomass was observed. High DNA-containing (HDNA) cells detected by FCM also increased over time in iron fertilized waters from 20% to 46% relative to the total population suggesting an active subpopulation of cells that were growing faster than the removal rates. In iron fertilized waters north of the Polar Front (North Patch), BP and abundance were ~90% and 80% higher, respectively, than in unfertilized waters. Our results suggest an active bacterial population that responded to iron fertilization

  5. Thermal performance of a meso-scale liquid-fuel combustor

    Vijayan, V.; Gupta, A.K.

    2011-01-01

    Research highlights: → Demonstrated successful combustion of liquid fuel-air mixtures in a novel meso-scale combustor. → Flame quenching was eliminated using heat recirculation in a swiss roll type combustor that also extended the flammability limits. → Liquid fuel was rapidly vaporized with the use of hot narrow channel walls that eliminated the need of a fuel atomizer. → Maximum power density of the combustor was estimated to be about 8.5 GW/m3 and heat load in the range of 50-280W. → Overall efficiency of the combustor was estimated in the range of 12 to 20%. - Abstract: Combustion in small scale devices poses significant challenges due to the quenching of reactions from wall heat losses as well as the significantly reduced time available for mixing and combustion. In the case of liquid fuels there are additional challenges related to atomization, vaporization and mixing with the oxidant in the very short time-scale liquid-fuel combustor. The liquid fuel employed here is methanol with air as the oxidizer. The combustor was designed based on the heat recirculating concept wherein the incoming reactants are preheated by the combustion products through heat exchange occurring via combustor walls. The combustor was fabricated from Zirconium phosphate, a ceramic with very low thermal conductivity (0.8 W m -1 K -1 ). The combustor had rectangular shaped double spiral geometry with combustion chamber in the center of the spiral formed by inlet and exhaust channels. Methanol and air were introduced immediately upstream at inlet of the combustor. The preheated walls of the inlet channel also act as a pre-vaporizer for liquid fuel which vaporizes the liquid fuel and then mixes with air prior to the fuel-air mixture reaching the combustion chamber. Rapid pre-vaporization of the liquid fuel by the hot narrow channel walls eliminated the necessity for a fuel atomizer. Self-sustained combustion of methanol-air was achieved in a chamber volume as small as 32.6 mm 3

  6. Memoria RAM

    Cruz Suárez, Juan Carlos

    2013-01-01

    The present study intends to open a new theoretical means of analysis within the field of comparative memories. Through the metaphorical designation of RAM memory we will try to observe the continuous circulation of social discourses related to the collective memory of a particular community. Thi...

  7. Forecasting wind power production from a wind farm using the RAMS model

    Tiriolo, L.; Torcasio, R. C.; Montesanti, S.

    2015-01-01

    of the ECMWF Integrated Forecasting System (IFS), whose horizontal resolution over Central Italy is about 25 km at the time considered in this paper. Because wind observations were not available for the site, the power curve for the whole wind farm was derived from the ECMWF wind operational analyses available......The importance of wind power forecast is commonly recognized because it represents a useful tool for grid integration and facilitates the energy trading. This work considers an example of power forecast for a wind farm in the Apennines in Central Italy. The orography around the site is complex...... and the horizontal resolution of the wind forecast has an important role. To explore this point we compared the performance of two 48 h wind power forecasts using the winds predicted by the Regional Atmospheric Modeling System (RAMS) for the year 2011. The two forecasts differ only for the horizontal resolution...

  8. Recent developments in the applications of the Regional Atmospheric Modeling System (RAMS) for emergency response planning and operational forecasting at the Kennedy Space Center

    Lyons, W.A.; Tremback, C.J.

    1996-01-01

    The authors will summarize ten years of developing and applying the Regional Atmospheric Modeling System (RAMS) to emergency response and operational dispersion forecasting at the Kennedy Space Center (KSC). RAMS forms the core of two workstation-based operational systems, ERDAS (the Emergency Response Dose Assessment System) and PROWESS (Parallelized RAMS Operational Weather Simulation System) which are undergoing extensive operational testing prior to potential deployment as part of the range forecasting system at KSC. RAMS has been interfaced with HYPACT (the Hybrid Particle and Concentration Transport Model) to produce detailed 3-D dispersion forecasts from a variety of sources including cold spills, routine launch operations, and explosive conflagrations of launch vehicles

  9. Laser Boost of a Small Interstellar Ram Jet to Obtain Operational Velocity. Implications for the DM Rocket/Ram Jet Model

    Walcott Beckwith, Andrew

    2010-05-01

    In other conference research papers, Beckwith obtained a maximum DM mass/energy value of up to 5 TeV, as opposed to 400 GeV for DM, which may mean more convertible power for a dark matter ram jet. The consequences are from assuming that axions are CDM, and KK gravitons are for WDM, then ρWarm-Dark-Matter would dominate not only structure formation in early universe formation, but would also influence the viability of the DM ram jet applications for interstellar travel. The increase in convertible DM mass makes the ram jet a conceivable option. This paper in addition to describing the scientific issues leading to that 5 TeV mass for DM also what are necessary and sufficient laser boost systems which would permit a ram net to become operational.

  10. Study of air pollution in urban and peri-urban area during the Escompte campaign using meso-scale modeling. Impact of dynamics and emission inventories; Etude de la pollution en zone urbaine et peri-urbaine a l'aide d'une modelisation meso-echelle durant la campagne Escompte. Impact de la dynamique et des inventaires d'emission

    Taghavi, S.M.

    2003-11-01

    This work involves the study of the redistribution of photochemical species over urban and peri-urban areas during the ESCOMTE campaign over southern France. This region includes Marseilles, an urban area close to the industrial zone of Fos-Berre, one of the most polluted sites in Europe. The comprehensive R AMS model, version 4.3, coupled on-line with a chemical module including 29 species (MOCA2.2) is used in parallel code. The efficiency of coupling is checked using Amdahl's law (1967). The percentage of parallelization is 96% for the RAMS model and increases to 98% for RAMS-Chimie. A number of sensitivity tests were performed to obtain realistic meteorological fields. In this work, the heterogeneity of the ground humidity depends on the surface texture, and the topography option accurately retrieves the location of mountaintops and valleys. To avoid bias in the chemical results, the meteorological simulation is first validated with surface data, Lidar, Sodar, soundings and airborne measurements for three IOPs (Intensive Observation Periods) which ave contrasting meteorological conditions. Secondly, the redistribution of chemical modeled species (CO, NO{sub x}, SO{sub 2}, O{sub 3}) is validated with surface, aircraft and Lidar data over this region where the circulation is complex (sea breeze associated with northern (Mistral) or southern flow). Use of two way nested grids resolves the problem of lateral boundaries for chemical fields (Taghavi et al, 2004). The location of convective cells and the channelling of Rhone and Durance depend on direction of synoptic flow and play a role in the redistribution of pollutants and their chemical regime. Two emission inventories of varying quality (30% difference in average) are compared (Taghavi et al, 2004), one with a high resolution (I km) and the other with an average resolution. In both cases, ozone plume location and concentration are the same, and thus we conclude a low resolution inventory is satisfactory to

  11. Monte Carlo simulation as a tool to predict blasting fragmentation based on the Kuz Ram model

    Morin, Mario A.; Ficarazzo, Francesco

    2006-04-01

    Rock fragmentation is considered the most important aspect of production blasting because of its direct effects on the costs of drilling and blasting and on the economics of the subsequent operations of loading, hauling and crushing. Over the past three decades, significant progress has been made in the development of new technologies for blasting applications. These technologies include increasingly sophisticated computer models for blast design and blast performance prediction. Rock fragmentation depends on many variables such as rock mass properties, site geology, in situ fracturing and blasting parameters and as such has no complete theoretical solution for its prediction. However, empirical models for the estimation of size distribution of rock fragments have been developed. In this study, a blast fragmentation Monte Carlo-based simulator, based on the Kuz-Ram fragmentation model, has been developed to predict the entire fragmentation size distribution, taking into account intact and joints rock properties, the type and properties of explosives and the drilling pattern. Results produced by this simulator were quite favorable when compared with real fragmentation data obtained from a blast quarry. It is anticipated that the use of Monte Carlo simulation will increase our understanding of the effects of rock mass and explosive properties on the rock fragmentation by blasting, as well as increase our confidence in these empirical models. This understanding will translate into improvements in blasting operations, its corresponding costs and the overall economics of open pit mines and rock quarries.

  12. Integrated Modeling and Experimental Studies at the Meso Scale for Advanced Reactive Materials

    2016-07-01

    CuO) thermite, and the metal/intermetallic system composed of titanium, silicon, and tita - nium, boron. A typical shock compaction experiment is...intense and weak chemical reactions recurring within a time interval of approximately 100 µ s. Similar results were observed for the tita - nium...region where there is only tita - nium (x < xf), from a region where there is only boron (x > xf). Since Y2 = 0 for x < xf, we find that a1 = −D13, b1

  13. Micro-to-Meso Scale Limit for Shape-Memory-Alloy Models with Thermal Coupling

    Benešová, Barbora; Roubíček, Tomáš

    2012-01-01

    Roč. 10, č. 3 (2012), s. 1059-1089 ISSN 1540-3459 R&D Projects: GA ČR GAP201/10/0357 Institutional research plan: CEZ:AV0Z20760514 Keywords : martensitic transformation * relaxation * thermodynamics * gradient young measures Subject RIV: BA - General Mathematics Impact factor: 1.562, year: 2012 http://epubs.siam.org/doi/abs/10.1137/110852176

  14. Meso-scale Modeling of Block Copolymers Self-Assembly in Casting Solutions for Membrane Manufacture

    Moreno Chaparro, Nicolas

    2016-01-01

    Isoporous membranes manufactured from diblock copolymer are successfully produced at laboratory scale under controlled conditions. Because of the complex phenomena involved, membrane preparation requires trial and error methodologies to find

  15. Mucin Aggregation from a Rod-like Meso-Scale Model

    Moreno, N.; Perilla, J.E.; Colina, C.M.; Lísal, Martin

    2015-01-01

    Roč. 113, 9-10 (2015), s. 898-909 ISSN 0026-8976 R&D Projects: GA ČR(CZ) GA13-02938S; GA MŠk LH12020 Grant - others:COLCIENCIAS(CO) 1101-521-28526; DIB-Universidad NC(CO) 1537 Institutional support: RVO:67985858 Keywords : aggregation * coarse-graining * kinetics Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.837, year: 2015

  16. The instability characteristics of lean premixed hydrogen and syngas flames stabilized on meso-scale bluff-body

    Kim, Yu Jeong

    2017-01-05

    Bluff-body flame stabilization has been used as one of main flame stabilization schemes to improve combustion stability in both large and small scale premixed combustion systems. The detailed investigation of instability characteristics is needed to understand flame stability mechanism. Direct numerical simulations are conducted to investigate flame dynamics on the instability of lean premixed hydrogen/air and syngas/air flames stabilized on a meso-scale bluff-body. A two-dimensional channel of 10 mm height and 10 mm length with a square bluff-body stabilizer of 0.5 mm is considered. The height of domain is chosen as an unconfined condition to minimize the effect of the blockage ratio. Flame/flow dynamics are observed by increasing the mean inflow velocity from a steady stable to unsteady asymmetrical instability, followed by blowoff. Detailed observations between hydrogen and syngas flames with a time scale analysis are presented.

  17. CONSTRUCTIVE MODEL OF ADAPTATION OF DATA STRUCTURES IN RAM. PART II. CONSTRUCTORS OF SCENARIOS AND ADAPTATION PROCESSES

    V. I. Shynkarenko

    2016-04-01

    Full Text Available Purpose.The second part of the paper completes presentation of constructive and the productive structures (CPS, modeling adaptation of data structures in memory (RAM. The purpose of the second part in the research is to develop a model of process of adaptation data in a RAM functioning in different hardware and software environments and scenarios of data processing. Methodology. The methodology of mathematical and algorithmic constructionism was applied. In this part of the paper, changes were developed the constructors of scenarios and adaptation processes based on a generalized CPS through its transformational conversions. Constructors are interpreted, specialized CPS. Were highlighted the terminal alphabets of the constructor scenarios in the form of data processing algorithms and the constructor of adaptation – in the form of algorithmic components of the adaptation process. The methodology involves the development of substitution rules that determine the output process of the relevant structures. Findings. In the second part of the paper, system is represented by CPS modeling adaptation data placement in the RAM, namely, constructors of scenarios and of adaptation processes. The result of the implementation of constructor of scenarios is a set of data processing operations in the form of text in the language of programming C#, constructor of the adaptation processes – a process of adaptation, and the result the process of adaptation – the adapted binary code of processing data structures. Originality. For the first time proposed the constructive model of data processing – the scenario that takes into account the order and number of calls to the various elements of data structures and adaptation of data structures to the different hardware and software environments. At the same the placement of data in RAM and processing algorithms are adapted. Constructionism application in modeling allows to link data models and algorithms for

  18. Characterisation of stable isotopes to identify residence times and runoff components in two meso-scale catchments in the Abay/Upper Blue Nile basin, Ethiopia

    Tekleab, S.; Wenninger, J.W.; Uhlenbrook, S.

    2014-01-01

    Measurements of the stable isotopes oxygen-18 (18O) and deuterium (2H) were carried out in two meso-scale catchments, Chemoga (358 km2) and Jedeb (296 km2) south of Lake Tana, Abay/Upper Blue Nile basin, Ethiopia. The region is of paramount importance for the water resources in the Nile basin, as

  19. Identifying residence times and streamflow generation processes using ?18O and ?2H in meso-scale catchments in the Abay/Upper Blue Nile, Ethiopia

    Teklaeb, S.; Wenninger, J.W.; Uhlenbrook, S.

    2013-01-01

    Measurements of the stable isotopes oxygen-18 (18O) and deuterium (2H) were carried out in two meso-scale catchments, Chemoga (358 km2) and Jedeb (296 km2) south of Lake Tana, Abay/Upper Blue Nile basin, Ethiopia. The region is of paramount importance for the water resources in the Nile basin.

  20. Confronting the WRF and RAMS mesoscale models with innovative observations in the Netherlands: Evaluating the boundary layer heat budget

    Steeneveld, G. J.; Tolk, L. F.; Moene, A. F.; Hartogensis, O. K.; Peters, W.; Holtslag, A. A. M.

    2011-12-01

    The Weather Research and Forecasting Model (WRF) and the Regional Atmospheric Mesoscale Model System (RAMS) are frequently used for (regional) weather, climate and air quality studies. This paper covers an evaluation of these models for a windy and calm episode against Cabauw tower observations (Netherlands), with a special focus on the representation of the physical processes in the atmospheric boundary layer (ABL). In addition, area averaged sensible heat flux observations by scintillometry are utilized which enables evaluation of grid scale model fluxes and flux observations at the same horizontal scale. Also, novel ABL height observations by ceilometry and of the near surface longwave radiation divergence are utilized. It appears that WRF in its basic set-up shows satisfactory model results for nearly all atmospheric near surface variables compared to field observations, while RAMS needed refining of its ABL scheme. An important inconsistency was found regarding the ABL daytime heat budget: Both model versions are only able to correctly forecast the ABL thermodynamic structure when the modeled surface sensible heat flux is much larger than both the eddy-covariance and scintillometer observations indicate. In order to clarify this discrepancy, model results for each term of the heat budget equation is evaluated against field observations. Sensitivity studies and evaluation of radiative tendencies and entrainment reveal that possible errors in these variables cannot explain the overestimation of the sensible heat flux within the current model infrastructure.

  1. Development of a portable power system with meso-scale vortex combustor and thermo-electric device

    Shimokuri, D; Hara, T; Ishizuka, S

    2014-01-01

    In this study, a small scale power generation system with a meso-scale vortex combustor has been developed. The system was consisted of a couple of thermo-electric device and a heat medium. The medium was made of duralumin, 40 × 40 × 20 mm and 52 g weight, and the vortex combustion chamber of 7 mm inner diameter was embedded in it. It was found that a stable flame could be established in the narrow 7 mm channel even the mean axial velocity reached 1.2 m/s. And furthermore, the vortex flow significantly enhanced the heat transfer from the burned gas to combustion chamber, and as a result, the medium was heated to 300°C quickly (within 5 minutes) by the combustion of propane / air mixture for 145W input energy. The system could successfully generate 1.98 W (4.3 V and 0.46 A), which corresponded to the energy conversion rate of 0.7 % per unit thermo-electric device

  2. Continuous formation of N-chloro-N,N-dialkylamine solutions in well-mixed meso-scale flow reactors

    Jolley, Katherine E

    2015-01-01

    Summary The continuous flow synthesis of a range of organic solutions of N,N-dialkyl-N-chloramines is described using either a bespoke meso-scale tubular reactor with static mixers or a continuous stirred tank reactor. Both reactors promote the efficient mixing of a biphasic solution of N,N-dialkylamine in organic solvent, and aqueous sodium hypochlorite to achieve near quantitative conversions, in 72–100% in situ yields, and useful productivities of around 0.05 mol/h with residence times from 3 to 20 minutes. Initial calorimetric studies have been carried out to inform on reaction exotherms, rates and safe operation. Amines which partition mainly in the organic phase require longer reaction times, provided by the CSTR, to compensate for low mass transfer rates in the biphasic system. The green metrics of the reaction have been assessed and compared to existing procedures and have shown the continuous process is improved over previous procedures. The organic solutions of N,N-dialkyl-N-chloramines produced continuously will enable their use in tandem flow reactions with a range of nucleophilic substrates. PMID:26734089

  3. Continuous formation of N-chloro-N,N-dialkylamine solutions in well-mixed meso-scale flow reactors

    A. John Blacker

    2015-12-01

    Full Text Available The continuous flow synthesis of a range of organic solutions of N,N-dialkyl-N-chloramines is described using either a bespoke meso-scale tubular reactor with static mixers or a continuous stirred tank reactor. Both reactors promote the efficient mixing of a biphasic solution of N,N-dialkylamine in organic solvent, and aqueous sodium hypochlorite to achieve near quantitative conversions, in 72–100% in situ yields, and useful productivities of around 0.05 mol/h with residence times from 3 to 20 minutes. Initial calorimetric studies have been carried out to inform on reaction exotherms, rates and safe operation. Amines which partition mainly in the organic phase require longer reaction times, provided by the CSTR, to compensate for low mass transfer rates in the biphasic system. The green metrics of the reaction have been assessed and compared to existing procedures and have shown the continuous process is improved over previous procedures. The organic solutions of N,N-dialkyl-N-chloramines produced continuously will enable their use in tandem flow reactions with a range of nucleophilic substrates.

  4. Understanding the shock and detonation response of high explosives at the continuum and meso scales

    Handley, C. A.; Lambourn, B. D.; Whitworth, N. J.; James, H. R.; Belfield, W. J.

    2018-03-01

    The shock and detonation response of high explosives has been an active research topic for more than a century. In recent years, high quality data from experiments using embedded gauges and other diagnostic techniques have inspired the development of a range of new high-fidelity computer models for explosives. The experiments and models have led to new insights, both at the continuum scale applicable to most shock and detonation experiments, and at the mesoscale relevant to hotspots and burning within explosive microstructures. This article reviews the continuum and mesoscale models, and their application to explosive phenomena, gaining insights to aid future model development and improved understanding of the physics of shock initiation and detonation propagation. In particular, it is argued that "desensitization" and the effect of porosity on high explosives can both be explained by the combined effect of thermodynamics and hydrodynamics, rather than the traditional hotspot-based explanations linked to pressure-dependent reaction rates.

  5. Meso-scale on-road vehicle emission inventory approach: a study on Dhaka City of Bangladesh supporting the 'cause-effect' analysis of the transport system.

    Iqbal, Asif; Allan, Andrew; Zito, Rocco

    2016-03-01

    The study aims to develop an emission inventory (EI) approach and conduct an inventory for vehicular sources in Dhaka City, Bangladesh. A meso-scale modelling approach was adopted for the inventory; the factors that influence the emissions and the magnitude of emission variation were identified and reported on, which was an innovative approach to account emissions unlike the conventional inventory approaches. Two techniques for the emission inventory were applied, viz. (i) a combined top-down and bottom-up approach that considered the total vehicle population and the average diurnal on-road vehicle speed profile in the city and (ii) a bottom-up approach that accounted for road link-specific emissions of the city considering diurnal traffic volume and speed profiles of the respective roads. For the bottom-up approach, road link-specific detailed data were obtained through field survey in 2012, where mid-block traffic count of the day, vehicle speed profile, road network and congestion data were collected principally. The emission variances for the change in transport system characteristics (like change in fuel type, AC usage pattern, increased speed and reduced congestion/stopping) were predicted and analysed in this study; congestion influenced average speed of the vehicles, and fuel types in the vehicles were identified as the major stressors. The study performance was considered reasonable when comparing with the limited number of similar studies conducted earlier. Given the increasing trend of private vehicles each year coupled with increasing traffic congestion, the city is under threat of increased vehicular emissions unless a good management strategy is implemented. Although the inventory is conducted for Dhaka and the result may be important locally, the approach adopted in this research is innovative in nature to be followed for conducting research on other urban transport systems.

  6. Ecological relationships of meso-scale distribution in 25 neotropical vertebrate species.

    Michalski, Lincoln José; Norris, Darren; de Oliveira, Tadeu Gomes; Michalski, Fernanda

    2015-01-01

    Vertebrates are a vital ecological component of Amazon forest biodiversity. Although vertebrates are a functionally important part of various ecosystem services they continue to be threatened by anthropogenic impacts throughout the Amazon. Here we use a standardized, regularly spaced arrangement of camera traps within 25km2 to provide a baseline assessment of vertebrate species diversity in a sustainable use protected area in the eastern Brazilian Amazon. We examined seasonal differences in the per species encounter rates (number of photos per camera trap and number of cameras with photos). Generalized linear models (GLMs) were then used to examine the influence of five variables (altitude, canopy cover, basal area, distance to nearest river and distance to nearest large river) on the number of photos per species and on functional groups. GLMs were also used to examine the relationships between large predators [Jaguar (Panthera onca) and Puma (Puma concolor)] and their prey. A total of 649 independent photos of 25 species were obtained from 1,800 camera trap days (900 each during wet and dry seasons). Only ungulates and rodents showed significant seasonal differences in the number of photos per camera. The number of photos differed between seasons for only three species (Mazama americana, Dasyprocta leporina and Myoprocta acouchy) all of which were photographed more (3 to 10 fold increase) during the wet season. Mazama americana was the only species where a significant difference was found in occupancy, with more photos in more cameras during the wet season. For most groups and species variation in the number of photos per camera was only explained weakly by the GLMs (deviance explained ranging from 10.3 to 54.4%). Terrestrial birds (Crax alector, Psophia crepitans and Tinamus major) and rodents (Cuniculus paca, Dasyprocta leporina and M. acouchy) were the notable exceptions, with our GLMs significantly explaining variation in the distribution of all species

  7. Ecological relationships of meso-scale distribution in 25 neotropical vertebrate species.

    Lincoln José Michalski

    Full Text Available Vertebrates are a vital ecological component of Amazon forest biodiversity. Although vertebrates are a functionally important part of various ecosystem services they continue to be threatened by anthropogenic impacts throughout the Amazon. Here we use a standardized, regularly spaced arrangement of camera traps within 25km2 to provide a baseline assessment of vertebrate species diversity in a sustainable use protected area in the eastern Brazilian Amazon. We examined seasonal differences in the per species encounter rates (number of photos per camera trap and number of cameras with photos. Generalized linear models (GLMs were then used to examine the influence of five variables (altitude, canopy cover, basal area, distance to nearest river and distance to nearest large river on the number of photos per species and on functional groups. GLMs were also used to examine the relationships between large predators [Jaguar (Panthera onca and Puma (Puma concolor] and their prey. A total of 649 independent photos of 25 species were obtained from 1,800 camera trap days (900 each during wet and dry seasons. Only ungulates and rodents showed significant seasonal differences in the number of photos per camera. The number of photos differed between seasons for only three species (Mazama americana, Dasyprocta leporina and Myoprocta acouchy all of which were photographed more (3 to 10 fold increase during the wet season. Mazama americana was the only species where a significant difference was found in occupancy, with more photos in more cameras during the wet season. For most groups and species variation in the number of photos per camera was only explained weakly by the GLMs (deviance explained ranging from 10.3 to 54.4%. Terrestrial birds (Crax alector, Psophia crepitans and Tinamus major and rodents (Cuniculus paca, Dasyprocta leporina and M. acouchy were the notable exceptions, with our GLMs significantly explaining variation in the distribution of all

  8. In Situ Decommissioning Sensor Network, Meso-Scale Test Bed - Phase 3 Fluid Injection Test Summary Report

    Serrato, M. G.

    2013-01-01

    The DOE Office of Environmental management (DOE EM) faces the challenge of decommissioning thousands of excess nuclear facilities, many of which are highly contaminated. A number of these excess facilities are massive and robust concrete structures that are suitable for isolating the contained contamination for hundreds of years, and a permanent decommissioning end state option for these facilities is in situ decommissioning (ISD). The ISD option is feasible for a limited, but meaningfull number of DOE contaminated facilities for which there is substantial incremental environmental, safety, and cost benefits versus alternate actions to demolish and excavate the entire facility and transport the rubble to a radioactive waste landfill. A general description of an ISD project encompasses an entombed facility; in some cases limited to the blow-grade portion of a facility. However, monitoring of the ISD structures is needed to demonstrate that the building retains its structural integrity and the contaminants remain entombed within the grout stabilization matrix. The DOE EM Office of Deactivation and Decommissioning and Facility Engineering (EM-13) Program Goal is to develop a monitoring system to demonstrate long-term performance of closed nuclear facilities using the ISD approach. The Savannah River National Laboratory (SRNL) has designed and implemented the In Situ Decommissioning Sensor Network, Meso-Scale Test Bed (ISDSN-MSTB) to address the feasibility of deploying a long-term monitoring system into an ISD closed nuclear facility. The ISDSN-MSTB goal is to demonstrate the feasibility of installing and operating a remote sensor network to assess cementitious material durability, moisture-fluid flow through the cementitious material, and resulting transport potential for contaminate mobility in a decommissioned closed nuclear facility. The original ISDSN-MSTB installation and remote sensor network operation was demonstrated in FY 2011-12 at the ISDSN-MSTB test cube

  9. In Situ Decommissioning Sensor Network, Meso-Scale Test Bed - Phase 3 Fluid Injection Test Summary Report

    Serrato, M. G.

    2013-09-27

    The DOE Office of Environmental management (DOE EM) faces the challenge of decommissioning thousands of excess nuclear facilities, many of which are highly contaminated. A number of these excess facilities are massive and robust concrete structures that are suitable for isolating the contained contamination for hundreds of years, and a permanent decommissioning end state option for these facilities is in situ decommissioning (ISD). The ISD option is feasible for a limited, but meaningfull number of DOE contaminated facilities for which there is substantial incremental environmental, safety, and cost benefits versus alternate actions to demolish and excavate the entire facility and transport the rubble to a radioactive waste landfill. A general description of an ISD project encompasses an entombed facility; in some cases limited to the blow-grade portion of a facility. However, monitoring of the ISD structures is needed to demonstrate that the building retains its structural integrity and the contaminants remain entombed within the grout stabilization matrix. The DOE EM Office of Deactivation and Decommissioning and Facility Engineering (EM-13) Program Goal is to develop a monitoring system to demonstrate long-term performance of closed nuclear facilities using the ISD approach. The Savannah River National Laboratory (SRNL) has designed and implemented the In Situ Decommissioning Sensor Network, Meso-Scale Test Bed (ISDSN-MSTB) to address the feasibility of deploying a long-term monitoring system into an ISD closed nuclear facility. The ISDSN-MSTB goal is to demonstrate the feasibility of installing and operating a remote sensor network to assess cementitious material durability, moisture-fluid flow through the cementitious material, and resulting transport potential for contaminate mobility in a decommissioned closed nuclear facility. The original ISDSN-MSTB installation and remote sensor network operation was demonstrated in FY 2011-12 at the ISDSN-MSTB test cube

  10. No Habitat Selection during Spring Migration at a Meso-Scale Range across Mosaic Landscapes: A Case Study with the Woodcock (Scolopax rusticola.

    Ariñe Crespo

    Full Text Available Success of migration in birds in part depends on habitat selection. Overall, it is still poorly known whether there is habitat selection amongst landbird migrants moving across landscapes. Europe is chiefly covered by agro-forestry mosaic landscapes, so migratory species associated to either agricultural landscapes or woodland habitats should theoretically find suitable stopover sites along migration. During migration from wintering to breeding quarters, woodcocks (Scolopax rusticola tagged with PTT satellite-tracking transmitters were used to test for the hypothesis that migrants associated to agro-forest habitats have no habitat selection during migration, at a meso-scale level. Using a GIS platform we extracted at a meso-scale range habitat cover at stopover localities. Results obtained from comparisons of soil covers between points randomly selected and true stopover localities sites revealed, as expected, the species may not select for particular habitats at a meso-scale range, because the habitat (or habitats required by the species can be found virtually everywhere on their migration route. However, those birds stopping over in places richer in cropland or mosaic habitats including both cropland and forest and with proportionally less closed forest stayed for longer than in areas with lower surfaces of cropland and mosaic and more closed forest. This suggests that areas rich in cropland or mosaic habitat were optimal.

  11. Modelling Regional Surface Energy Exchange and Boundary Layer Development in Boreal Sweden — Comparison of Mesoscale Model (RAMS Simulations with Aircraft and Tower Observations

    Meelis Mölder

    2012-10-01

    Full Text Available Simulation of atmospheric and surface processes with an atmospheric model (RAMS during a period of ten days in August 2001 over a boreal area in Sweden were compared to tower measurements and aircraft measurements of vertical profiles as well as surface fluxes from low altitude flights. The shape of the vertical profiles was simulated reasonably well by the model although there were significant biases in absolute values. Surface fluxes were less well simulated and the model showed considerable sensitivity to initial soil moisture conditions. The simulations were performed using two different land cover databases, the original one supplied with the RAMS model and the more detailed CORINE database. The two different land cover data bases resulted in relatively large fine scale differences in the simulated values. The conclusion of this study is that RAMS has the potential to be used as a tool to estimate boundary layer conditions and surface fluxes and meteorology over a boreal area but also that further improvement is needed.

  12. Comparison of hourly surface downwelling solar radiation estimated from MSG-SEVIRI and forecast by the RAMS model with pyranometers over Italy

    Federico, Stefano; Torcasio, Rosa Claudia; Sanò, Paolo; Casella, Daniele; Campanelli, Monica; Fokke Meirink, Jan; Wang, Ping; Vergari, Stefania; Diémoz, Henri; Dietrich, Stefano

    2017-06-01

    In this paper, we evaluate the performance of two global horizontal solar irradiance (GHI) estimates, one derived from Meteosat Second Generation (MSG) and another from the 1-day forecast of the Regional Atmospheric Modeling System (RAMS) mesoscale model. The horizontal resolution of the MSG-GHI is 3 × 5 km2 over Italy, which is the focus area of this study. For this paper, RAMS has the horizontal resolution of 4 km.The performances of the MSG-GHI estimate and RAMS-GHI 1-day forecast are evaluated for 1 year (1 June 2013-31 May 2014) against data of 12 ground-based pyranometers over Italy spanning a range of climatic conditions, i.e. from maritime Mediterranean to Alpine climate.Statistics for hourly GHI and daily integrated GHI are presented for the four seasons and the whole year for all the measurement sites. Different sky conditions are considered in the analysisResults for hourly data show an evident dependence on the sky conditions, with the root mean square error (RMSE) increasing from clear to cloudy conditions. The RMSE is substantially higher for Alpine stations in all the seasons, mainly because of the increase of the cloud coverage for these stations, which is not well represented at the satellite and model resolutions. Considering the yearly statistics computed from hourly data for the RAMS model, the RMSE ranges from 152 W m-2 (31 %) obtained for Cozzo Spadaro, a maritime station, to 287 W m-2 (82 %) for Aosta, an Alpine site. Considering the yearly statistics computed from hourly data for MSG-GHI, the minimum RMSE is for Cozzo Spadaro (71 W m-2, 14 %), while the maximum is for Aosta (181 W m-2, 51 %). The mean bias error (MBE) shows the tendency of RAMS to over-forecast the GHI, while no specific behaviour is found for MSG-GHI.Results for daily integrated GHI show a lower RMSE compared to hourly GHI evaluation for both RAMS-GHI 1-day forecast and MSG-GHI estimate. Considering the yearly evaluation, the RMSE of daily integrated GHI is at least 9

  13. Evaluación de la representación de un sistema convectivo de mesoescala utilizando el modelo RAMS The representation of a mesoscale convective system using RAMS model

    Juan José Ruiz

    2006-12-01

    Full Text Available En este trabajo se evalúa la capacidad del modelo RAMS en representar un sistema convectivo en mesoescala asociado con la ocurrencia de una intensa corriente en chorro en capas bajas. Para realizar la verificación y debido a las limitaciones de la red observacional operativa, se propone aquí la utilización de productos derivados de sensores remotos de microondas pasivas y activas. También se efectúa un análisis del entorno en escala sinóptica de este evento, con énfasis en el análisis de la evolución de la inestabilidad convectiva y la convergencia en capas bajas. El modelo representa correctamente la circulación de mayor escala, y también simula adecuadamente la precipitación total acumulada. No obstante en las resoluciones utilizadas el modelo presenta dificultad en representar la estructura interna del sistema convectivo. Se considera que la estrategia adoptada para analizar el desempeño del modelo, es útil para identificar los mayores problemas en la reproducción de la distribución de precipitación asociada al sistema convectivo y su ubicación y consecuentemente, para establecer pautas para una mejora de la predicción de los mismos.This work concentrates in the evaluation of RAMS model's representation of a mesoscale convective system associated with a strong low level jet event. Diverse products derived from satellite data are used to measure precipitation amounts and to characterize the system internal structure. The synoptic environment associated to system genesis and growing stages is also analyzed through the description of mechanisms favoring both, convective instability and low level convergence. RAMS model correctly represents the environmental conditions where the system develops, the accumulated precipitation fields and precipitation rates at particular moments when precipitation radar data were available. However the model fails to capture the stratiform precipitation area behind the convective one. It is

  14. Electrical Characteristics, Electrode Sheath and Contamination Layer Behavior of a Meso-Scale Premixed Methane-Air Flame Under AC/DC Electric Fields

    Chen, Qi; Yan, Limin; Zhang, Hao; Li, Guoxiu

    2016-05-01

    Electrical characteristics of a nozzle-attached meso-scale premixed methane-air flame under low-frequency AC (0-4300 V, 0-500 Hz) and DC (0-3300 V) electric fields were studied. I-V curves were measured under different experimental conditions to estimate the magnitude of the total current 100-102 μA, the electron density 1015-1016 m-3 and further the power dissipation ≤ 0.7 W in the reaction zone. At the same time, the meso-scale premixed flame conductivity 10-4-10-3 Ω-1·m-1 as a function of voltage and frequency was experimentally obtained and was believed to represent a useful order-of magnitude estimate. Moreover, the influence of the collision sheath relating to Debye length (31-98 μm) and the contamination layer of an active electrode on measurements was discussed, based on the combination of simulation and theoretical analysis. As a result, the electrode sheath dimension was evaluated to less than 0.5 mm, which indicated a complex effect of the collision sheath on the current measurements. The surface contamination effect of an active electrode was further analyzed using the SEM imaging method, which showed elements immigration during the contamination layer formation process. supported by National Natural Science Foundation of China (No. 51376021), and the Fundamental Research Fund for Major Universities (No. 2013JBM079)

  15. Alpha particle induced soft errors in NMOS RAMs: a review

    Carter, P.M.; Wilkins, B.R.

    1987-01-01

    The paper aims to explain the alpha particle induced soft error phenomenon using the NMOS dynamic random access memory (RAM) as a model. It discusses some of the many techniques experimented with by manufacturers to overcome the problem, and gives a review of the literature covering most aspects of soft errors in dynamic RAMs. Finally, the soft error performance of current dynamic RAM and static RAM products from several manufacturers are compared. (author)

  16. Numerical simulation of tropical-temperate troughs over Southern Africa using the CSU RAMS model

    Van den Heever, SC

    1997-08-01

    Full Text Available ) and the wet (1981) late summer case studies has been examined. Model simulations reveal that the tropical-temperate troughs form when an upper westerly wave coincides with an easterly, wave or depression in lower levels. These systems occur preferentially over...

  17. Multivariate analysis and extraction of parameters in resistive RAMs using the Quantum Point Contact model

    Roldán, J. B.; Miranda, E.; González-Cordero, G.; García-Fernández, P.; Romero-Zaliz, R.; González-Rodelas, P.; Aguilera, A. M.; González, M. B.; Jiménez-Molinos, F.

    2018-01-01

    A multivariate analysis of the parameters that characterize the reset process in Resistive Random Access Memory (RRAM) has been performed. The different correlations obtained can help to shed light on the current components that contribute in the Low Resistance State (LRS) of the technology considered. In addition, a screening method for the Quantum Point Contact (QPC) current component is presented. For this purpose, the second derivative of the current has been obtained using a novel numerical method which allows determining the QPC model parameters. Once the procedure is completed, a whole Resistive Switching (RS) series of thousands of curves is studied by means of a genetic algorithm. The extracted QPC parameter distributions are characterized in depth to get information about the filamentary pathways associated with LRS in the low voltage conduction regime.

  18. SQL-RAMS

    Alfaro, Victor O.; Casey, Nancy J.

    2005-01-01

    SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS -- a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the File-Maker Pro software system and was constructed in modules that could act as standalone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight into a particular workstatus document, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enables rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks, which in the past required administrator intervention. Additionally, many of the design limitations have been corrected, allowing for a robust application that is user centric.

  19. Analysis of Low-Carbon Economy Efficiency of Chinese Industrial Sectors Based on a RAM Model with Undesirable Outputs

    Ming Meng

    2017-03-01

    Full Text Available Industrial energy and environment efficiency evaluation become especially crucial as industrial sectors play a key role in CO2 emission reduction and energy consumption. This study adopts the additive range-adjusted measure data envelope analysis (RAM-DEA model to estimate the low-carbon economy efficiency of Chinese industrial sectors in 2001–2013. In addition, the CO2 emission intensity mitigation target for each industrial sector is assigned. Results show that, first, most sectors are not completely efficient, but they have experienced and have improved greatly during the period. These sectors can be divided into four categories, namely, mining, light, heavy, and electricity, gas, and water supply industries. The efficiency is diverse among the four industrial categories. The average efficiency of the light industry is the highest among the industries, followed by those of the mining and the electricity, gas, and water supply industries, and that of the heavy industry is the lowest. Second, the electricity, gas, and water supply industry shows the biggest potential for CO2 emission reduction, thus containing most of the sectors with large CO2 emission intensity mitigation targets (more than 45%, followed by the mining and the light industries. Therefore, the Chinese government should formulate diverse and flexible policy implementations according to the actual situation of the different sectors. Specifically, the sectors with low efficiency should be provided with additional policy support (such as technology and finance aids to improve their industrial efficiency, whereas the electricity, gas, and water supply industry should maximize CO2 emission reduction.

  20. Direct Radiative Impacts of Central American Biomass Burning Smoke Aerosols: Analysis from a Coupled Aerosol-Radiation-Meteorology Model RAMS-AROMA

    Wang, J.; Christopher, S. A.; Nair, U. S.; Reid, J. S.; Prins, E. M.

    2005-12-01

    Considerable efforts including various field experiments have been carried out in the last decade for studying the regional climatic impact of smoke aerosols produced by biomass burning activities in Africa and South America. In contrast, only few investigations have been conducted for Central American Biomass Burning (CABB) region. Using a coupled aerosol-radiation-meteorology model called RAMS-AROMA together with various ground-based observations, we present a comprehensive analysis of the smoke direct radiative impacts on the surface energy budget, boundary layer evolution, and e precipitation process during the CABB events in Spring 2003. Quantitative estimates are also made regarding the transboundary carbon mass to the U.S. in the form of smoke particles. Buult upon the Regional Atmospheric Modeling System (RAMS) mesoscale model, the RAMS AROMA has several features including Assimilation and Radiation Online Modeling of Aerosols (AROMA) algorithms. The model simulates smoke transport by using hourly smoke emission inventory from the Fire Locating and Modeling of Burning Emissions (FLAMBE) geostationary satellite database. It explicitly considers the smoke effects on the radiative transfer at each model time step and model grid, thereby coupling the dynamical processes and aerosol transport. Comparison with ground-based observation show that the simulation realistically captured the smoke transport timeline and distribution from daily to hourly scales. The effects of smoke radiative extinction on the decrease of 2m air temperature (2mT), diurnal temperature range (DTR), and boundary layer height over the land surface are also quantified. Warming due to smoke absorption of solar radiation can be found in the lower troposphere over the ocean, but not near the underlying land surface. The increase of boundary layer stability produces a positive feedback where more smoke particles are trapped in the lower boundary layer. These changes in temperature, surface

  1. Model study of meteorology and photochemical air pollution over un urban area in south-eastern France (ESCOMPTE campaign).

    Taghavi, M.; Cautenet, S.

    2003-04-01

    The ESCOMPTE Campaign has been conducted over Southern France (Provence region including the Marseille, Aix and Toulon cities and the Fos-Berre industrial center) in June and July of 2001. In order to study the redistribution of the pollutants emitted by anthropic and biogenic emissions and their impact on the atmospheric chemistry, we used meso-scale modeling (RAMS model, paralleled version 4.3, coupled on line with chemical modules : MOCA2.2 (Poulet et al, 2002) including 29 gaseous species). The hourly high resolution emissions were obtained from ESCOMPTE database (Ponche et al, 2002). The model was coupled with the dry deposition scheme (Walmsley and Weseley,1996). In this particular case of complex circulation (sea breeze associated with topography), the processes involving peaks of pollution were strongly non linear, and the meso scale modeling coupled on line with chemistry module was an essential step for a realistic redistribution of chemical species. Two nested grids satisfactorily describe the synoptic dynamics and the sea breeze circulations. The ECMWF meteorological fields provide the initial and boundary conditions. Different events characterized by various meteorological situations were simulated. Meteorological fields retrieved by modeling, also Modeled ozone, NOx, CO and SO2 concentrations, were compared with balloons, lidars, aircrafts and surface stations measurements. The chemistry regimes were explained according to the distribution of plumes. The stratified layers were examined.

  2. Sharma, Dr Ram Swaroop

    Home; Fellowship. Fellow Profile. Elected: 1989 Section: Earth & Planetary Sciences. Sharma, Dr Ram Swaroop Ph.D. (Basel), FNA. Date of birth: 10 July 1937. Specialization: Metamorphic Petrology, Mineralogy and Precambrian Geology Address: 70/36, Pratapnagar, Sector 7, Sanganer (RHB), Jaipur 302 033, Rajasthan

  3. RAMS (Risk Analysis - Modular System) methodology

    Stenner, R.D.; Strenge, D.L.; Buck, J.W. [and others

    1996-10-01

    The Risk Analysis - Modular System (RAMS) was developed to serve as a broad scope risk analysis tool for the Risk Assessment of the Hanford Mission (RAHM) studies. The RAHM element provides risk analysis support for Hanford Strategic Analysis and Mission Planning activities. The RAHM also provides risk analysis support for the Hanford 10-Year Plan development activities. The RAMS tool draws from a collection of specifically designed databases and modular risk analysis methodologies and models. RAMS is a flexible modular system that can be focused on targeted risk analysis needs. It is specifically designed to address risks associated with overall strategy, technical alternative, and `what if` questions regarding the Hanford cleanup mission. RAMS is set up to address both near-term and long-term risk issues. Consistency is very important for any comparative risk analysis, and RAMS is designed to efficiently and consistently compare risks and produce risk reduction estimates. There is a wide range of output information that can be generated by RAMS. These outputs can be detailed by individual contaminants, waste forms, transport pathways, exposure scenarios, individuals, populations, etc. However, they can also be in rolled-up form to support high-level strategy decisions.

  4. The Development of Male-Oriented Behavior in Rams

    Roselli, Charles E.; Reddy, Radhika; Kaufman, Katherine

    2011-01-01

    The sheep offers a unique mammalian model in which to study paradoxical same-sex sexual partner preferences. Variations in sexual partner preferences occur spontaneously with as many as 8% of rams in a population exhibiting a sexual preference for other rams (male-oriented). The current review presents an overview and update of the male-oriented ram model and discusses several theories that have been invoked to explain same sex preferences in this species. Although our understanding of the bi...

  5. Stable carbon and nitrogen isotope variation in the northern lampfish and Neocalanus, marine survival rates of pink salmon, and meso-scale eddies in the Gulf of Alaska

    Kline, Thomas C., Jr.

    2010-10-01

    Northern lampfish (NLF), Stenobrachius leucopsarus (Myctophidae), the dominant pelagic fish taxon of the subarctic North Pacific Ocean, were sampled opportunistically in MOCNESS tows made on continental slope waters of the Gulf of Alaska (GOA) as well as in deep areas of Prince William Sound (PWS) during 1997-2006. The overall mean whole-body lipid-corrected stable carbon isotope value of NLF from the GOA was -21.4 (SD = 0.7) whereas that from PWS was -19.5 (SD = 0.9). This pattern is similar to that observed for late feeding stage Neocalanus cristatus copepods thus confirming a mean cross-shelf carbon stable isotope gradient. As well, there was a statistically significant positive correlation between the considerable temporal variation in the monthly mean carbon stable isotope composition of GOA Neocalanus and GOA NLF ( r = 0.69, P food chain length whereas carbon stable isotopes reflect organic carbon production. The carbon stable isotope values of NLF, measured in May, were positively correlated to marine survival rate of PWS hatchery salmon cohorts entering the marine environment the same year ( r = 0.84, P < 0.001). The carbon stable isotope values for Neocalanus in May were also positively correlated to salmon marine survival ( r = 0.82, P < 0.001). Processes thus manifested through the carbon stable isotope value of biota from the continental slope more closely predicted marine survival rate than that of the salmon themselves. The incipient relationships suggested by the correlations are consistent with the hypothesis that exchange between coastal and oceanic waters in the study area is driven by meso-scale eddies. These eddies facilitate the occurrence of slope phytoplankton blooms as well as drive oceanic zooplankton subsidies into coastal waters. The strong as well as more significant correlations of salmon marine survival rate to NLF as well as slope Neocalanus carbon stable isotope values point to processes taking place at the slope (i.e., interactions

  6. HyRAM V1.0 User Guide

    Groth, Katrina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zumwalt, Hannah Ruth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Andrew Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-03-01

    Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen release and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.

  7. Climate change impact on the discharge in meso-scale catchments and consequences for the hydropower-production in Switzerland

    Rössler, Ole; Hänggi, Pascal; Köplin, Nina; Meyer, Rapahel; Schädler, Bruno; Weingartner, Rolf

    2013-04-01

    The potential effect of climate change on hydrology is the acceleration of the hydrological cycle that in turn will likely cause changes in the discharge regime. As a result, socio-economic systems (e.g., tourism, hydropower industry) may be drastically affected. In this study, we comprehensively analyzed the effect of climate change on different hydrological components like mean and low-flow levels, and drought stress in mesoscale catchments of Switzerland. In terms of mean flows approx. 200 catchments in Switzerland were simulated for the reference period 1984-2005 using the hydrological model PREVAH and projection for near (2025-2046) and far future (2074-2095) are based on delta-change values of 10 ENSEMBLES regional climate models assuming A1B emission scenario (CH2011 climate scenario data sets). We found seven distinct response types of catchments, each exhibiting a characteristic annual cycle of hydrologic change. A general pattern observed for all catchments, is the clearly decreasing summer runoff. Hence, within a second analysis of future discharge a special focus was set on summer low flow in a selection of 29 catchments in the Swiss Midlands. Low flows are critical as they have great implications on water usage and biodiversity. We re-calibrated the hydrological model PREVAH with a focus on base-flow and gauged discharge and used the aforementioned climate data sets and simulation time periods. We found low flow situations to be very likely to increase in both, magnitude and duration, especially in central and western Switzerland plateau. At third, the drought stress potential was analyzed by simulating the soil moisture level under climate change conditions in a high mountain catchment. We used the distributed hydrological model WaSiM-ETH for this aspect as soil characteristics are much better represented in this model. Soil moisture in forests below 2000 m a.s.l. were found to be affected at most, which might have implication to their function as

  8. Water supply sustainability and adaptation strategies under anthropogenic and climatic changes of a meso-scale Mediterranean catchment.

    Collet, Lila; Ruelland, Denis; Estupina, Valérie Borrell; Dezetter, Alain; Servat, Eric

    2015-12-01

    Assessing water supply sustainability is crucial to meet stakeholders' needs, notably in the Mediterranean. This region has been identified as a climate change hot spot, and as a region where water demand is continuously increasing due to population growth and the expansion of irrigated areas. The Hérault River catchment (2500 km2, France) is a typical example and a negative trend in discharge has been observed since the 1960s. In this context, local stakeholders need to evaluate possible future changes in water allocation capacity in the catchment, using climate change, dam management and water use scenarios. A modelling framework that was already calibrated and validated on this catchment over the last 50 years was used to assess whether water resources could meet water demands at the 2030 horizon for the domestic, agricultural and environmental sectors. Water supply sustainability was evaluated at the sub-basin scale according to priority allocations using a water supply capacity index, frequency of unsatisfactory years as well as the reliability, resilience and sustainability metrics. Water use projections were based on the evolution of population, per-unit water demand, irrigated areas, water supply network efficiency, as well as on the evaluation of a biological flow. Climate projections were based on an increase in temperature up to 2°C and a decrease in daily precipitation by 20%. Adaptation strategies considered reducing per-unit water demand for the domestic sector and the importation of water volume for the agricultural sector. The dissociated effects of water use and climatic constraints on water supply sustainability were evaluated. Results showed that the downstream portions would be the more impacted as they are the most exploited ones. In the domestic sector, sustainability indicators would be more degraded by climate change scenarios than water use constraints. In the agricultural sector the negative impact of water use scenarios would be

  9. Combined influence of meso-scale circulation and bathymetry on the foraging behaviour of a diving predator, the king penguin (Aptenodytes patagonicus)

    Scheffer, Annette; Trathan, Philip N.; Edmonston, Johnnie G.; Bost, Charles-André

    2016-02-01

    Investigating the responses of marine predators to environmental features is of key importance for understanding their foraging behaviour and reproductive success. In this study we examined the foraging behaviour of king penguins breeding at Kerguelen (southern Indian Ocean) in relation to oceanographic and bathymetric features within their foraging ambit. We used ARGOS and Global Positioning System tracking together with Time-Depth-Temperature-Recorders (TDR) to follow the at-sea movements of incubating and brooding king penguins. Combining the penguin behaviour with oceanographic data at the surface through satellite data and at depth through in-situ recordings by the TDRs enabled us to explore how these predators adjusted their horizontal and vertical foraging movements in response to their physical environment. Relating the observed behaviour and oceanographic patterns to local bathymetry lead to a comprehensive picture of the combined influence of bathymetry and meso-scale circulation on the foraging behaviour of king penguins. During both breeding stages king penguins foraged in the area to the south-east of Kerguelen, where they explored an influx of cold waters of southern origin interacting with the Kerguelen Plateau bathymetry. Foraging in the Polar Front and at the thermocline was associated with high prey capture rates. However, foraging trip orientation and water mass utilization suggested that bathymetrically entrained cold-water features provided the most favourable foraging locations. Our study explicitly reports the exploration of bathymetry-related oceanographic features by foraging king penguins. It confirms the presence of Areas of Ecological Significance for marine predators on the Kerguelen Plateau, and suggests the importance of further areas related to the cold-water flow along the shelf break of the Kerguelen Plateau.

  10. Hydraulic ram analysis = Analyse du bélier hydraulique

    Verspuy, C.; Tijsseling, A.S.

    1993-01-01

    A simple mathematical model describing the operation of a hydraulic ram is presented. Predictions of the model are compared with measurements done in an earlier stage of the project. The model is used to perform a parameter variation study.

  11. Using Oblivious RAM in Genomic Studies

    Karvelas, Nikolaos P.; Peter, Andreas; Katzenbeisser, Stefan; Garcia-Alfaro, Joaquin; Navarro-Aribas, Guillermo; Hartenstein, Hannes; Herrera-Joancomarti, Jordi

    2017-01-01

    Since the development of tree-based Oblivious RAMs by Shi et al. it has become apparent that privacy preserving outsourced storage can be practical. Although most current constructions follow a client-server model, in many applications, such as Genome Wide Association Studies (GWAS), it is desirable

  12. Externally Verifiable Oblivious RAM

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  13. Study of seasonal sexual activity variations in Algerian rams: Sexual ...

    benia

    2013-10-09

    Oct 9, 2013 ... testosterone in sheep, even for Rembi rams, in our .... Blood samples were then transported to the laboratory, centrifuged at 3000 rpm/min for 20 min. ... homogeneity of the data was assessed and conformed to the model.

  14. Atomistic mechanisms of ReRAM cell operation and reliability

    Pandey, Sumeet C.

    2018-01-01

    We present results from first-principles-based modeling that captures functionally important physical phenomena critical to cell materials selection, operation, and reliability for resistance-switching memory technologies. An atomic-scale description of retention, the low- and high-resistance states (RS), and the sources of intrinsic cell-level variability in ReRAM is discussed. Through the results obtained from density functional theory, non-equilibrium Green’s function, molecular dynamics, and kinetic Monte Carlo simulations; the role of variable-charge vacancy defects and metal impurities in determining the RS, the LRS-stability, and electron-conduction in such RS is reported. Although, the statistical electrical characteristics of the oxygen-vacancy (Ox-ReRAM) and conductive-bridging RAM (M-ReRAM) are notably different, the underlying similar electrochemical phenomena describing retention and formation/dissolution of RS are being discussed.

  15. Laser-propelled ram accelerator

    Sasoh, A. [Tohoku Univ., Sendai (Japan). Inst. of Fluid Science

    2000-11-01

    The concept of 'laser-propelled ram accelerator (L-RAMAC)' is proposed. Theoretically it is capable of achieving a higher launch speed than that by a chemical ram accelerator because a higher specific energy can be input to the propellant gas. The laser beam is supplied through the muzzle, focused as an annulus behind the base of the projectile. The performance of L-RAMAC is analized based on generalized Rankine-Hugoniot relations, suggesting that a superorbital muzzle speed is achievable out of this device. (orig.)

  16. A RAM: Realidade e Utopia

    Pereira, Carlos Santos

    2003-01-01

    Evoluções tecnológicas recentes, nomeadamente em matéria de electrónica e de informática, e a busca de conceitos operacionais adaptados às novas tecnologias estão a revolucionar a arte da guerra. O êxito da “Tempestade no Deserto”, em 1991 e das sucessivas intervenções militares dos EUA nos anos seguintes mais reforçaram a ideia de que se estava perante uma verdadeira revolução – É a Revolução nos Assuntos Militares (RAM). Na realidade, a RAM é um fenómeno comple...

  17. A Long-term Slip Model for the San Ramón Fault, Santiago de Chile, from Tectonically Reconcilable Boundary Conditions

    Aron, F.; Estay, N.; Cembrano, J. M.; Yanez, G. A.

    2016-12-01

    We constructed a 3D Boundary Elements model simulating subduction of the Nazca plate underneath South America, from 29° to 38° S, to compute long-term surface deformation and slip rates on crustal faults imbedded in the upper-plate wedge of the Andean orogen. We tested our model on the San Ramón Fault (SRF), a major E-dipping, thrust structure limiting the western front of the Main Cordillera with surface expression along the entire, 40 km long, extension of the Santiago de Chile basin. Long-lived thrusting has produced more than 2 km of differential uplift of the mountains. Given its proximity to the country's largest city, this potentially seismogenic fault —dormant during historic times— has drawn increasing public attention. We used earthquake hypocenters captured over a one-year seismic deployment, 2D resistivity profiles, and published geologic cross-sections to determine the geometry of the SRF. The base of the lithosphere and plate interface surfaces were defined based on average Andean values and the Slab1.0 model. The simulation reproduces plate convergence and mechanic decoupling of the lithospheric plates across the subduction seismic cycle using mixed boundary conditions. Relative plate motion is achieved prescribing uniform, far-field horizontal displacement over the depth extension of both the oceanic and continental lithospheric plates. Long-term deformation is carried out in two steps. First, the modeled surfaces are allowed to slip freely emulating continuous slip on the subduction megathrust; subsequently, zero displacement is prescribed on the locking zone of the megathrust down to 40 km depth, while keeping the rest of the surfaces traction free, mimicking interseismic conditions. Long-term slip rate fields obtained for the SRF range between 0.1 and 1% the plate convergence rate, with maximum values near the surface. Interestingly, at an estimated 76-77 mm/yr relative plate motion velocity, those rates agree well with what has been

  18. Mohan Ram, Prof. Holenarasipur Yoganarasimham

    Mohan Ram, Prof. Holenarasipur Yoganarasimham Ph.D. (Delhi), FNA, FNASc, FNAAS Council Service: 1983-88; Vice-President: 1986-88. Date of birth: 24 September 1930. Specialization: Plant Growth & Development and Economic Botany Address: No. 174, SFS DDA Flats, Mukherjee Nagar, Delhi 110 009, U.T.

  19. Time-bin quantum RAM

    Moiseev, E. S.; Moiseev, S. A.

    2016-11-01

    We have proposed a compact scheme of quantum random access memory (qRAM) based on the impedance matched multi-qubit photon echo quantum memory incorporated with the control four-level atom in two coupled QED cavities. A set of matching conditions for basic physical parameters of the qRAM scheme that provides an efficient quantum control of the fast single photon storage and readout has been found. In particular, it has been discovered that the efficient qRAM operations are determined by the specific properties of the excited photonic molecule coupling the two QED cavities. Herein, the maximal efficiency of the qRAM is realized when the cooperativity parameter of the photonic molecule equals to unity that can be experimentally achievable. We have also elaborated upon the new quantum address scheme where the multi-time-bin photon state is used for the control of the four-level atom during the readout of the photonic qubits from the quantum memory. The scheme reduces the required number of logical elements to one. Experimental implementation by means of current quantum technologies in the optical and microwave domains is also discussed.

  20. RAM-efficient external memory sorting

    Arge, Lars; Thorup, Mikkel

    2013-01-01

    In recent years a large number of problems have been considered in external memory models of computation, where the complexity measure is the number of blocks of data that are moved between slow external memory and fast internal memory (also called I/Os). In practice, however, internal memory time...... often dominates the total running time once I/O-efficiency has been obtained. In this paper we study algorithms for fundamental problems that are simultaneously I/O-efficient and internal memory efficient in the RAM model of computation....

  1. Simple quasi-analytical holonomic homogenization model for the non-linear analysis of in-plane loaded masonry panels: Part 1, meso-scale

    Milani, G.; Bertolesi, E.

    2017-07-01

    A simple quasi analytical holonomic homogenization approach for the non-linear analysis of masonry walls in-plane loaded is presented. The elementary cell (REV) is discretized with 24 triangular elastic constant stress elements (bricks) and non-linear interfaces (mortar). A holonomic behavior with softening is assumed for mortar. It is shown how the mechanical problem in the unit cell is characterized by very few displacement variables and how homogenized stress-strain behavior can be evaluated semi-analytically.

  2. Assessment of surface water resources availability using catchment modeling and the results of tracer studies in the meso-scale Migina Catchment, Rwanda

    Munyaneza, O.; Mukubwa, A.; Maskey, S.; Wenninger, J.W.; Uhlenbrook, S.

    2013-01-01

    In the last couple of years, different hydrological research projects were undertaken in the Migina catchment (243.2 km2), a tributary of the Kagera river in Southern Rwanda. These projects were aimed to understand hydrological processes of the catchment using analytical and experimental approaches

  3. HyRAM Testing Script.

    Parkins, Owen

    2014-12-01

    The testing script is to provide a method of inspections to HyRAM (v1.0.0.244 Alpha) application features. This document will lead participants through the use of the application to make sure the application performs as designed. If a feature of the application becomes non-working, this script will relay useful information back to the designers of the application so that the feature can be fixed. This is essential to keep the application updated and performing as designed so that the users of this program can be satisfied. There will be frequent updates of this document to ensure proper testing of future application versions.

  4. Structure and properties of a model conductive filament/host oxide interface in HfO2-based ReRAM

    Padilha, A. C. M.; McKenna, K. P.

    2018-04-01

    Resistive random-access memory (ReRAM) is a promising class of nonvolatile memory capable of storing information via its resistance state. In the case of hafnium oxide-based devices, experimental evidence shows that a conductive oxygen-deficient filament is formed and broken inside of the device by oxygen migration, leading to switching of its resistance state. However, little is known about the nature of this conductive phase, its interface with the host oxide, or the associated interdiffusion of oxygen, presenting a challenge to understanding the switching mechanism and device properties. To address these problems, we present atomic-scale first-principles simulations of a prototypical conductive phase (HfO), the electronic properties of its interface with HfO2, as well as stability with respect to oxygen diffusion across the interface. We show that the conduction-band offset between HfO and HfO2 is 1.3 eV, smaller than typical electrode-HfO2 band offsets, suggesting that positive charging and band bending should occur at the conductive filament-HfO2 interface. We also show that transfer of oxygen across the interface, from HfO2 into HfO, costs around 1.2 eV per atom and leads to a gradual opening of the HfO band gap, and hence disruption of the electrical conductivity. These results provide invaluable insights into understanding the switching mechanism for HfO2-based ReRAM.

  5. Minsk ja RAM 7 / Evelyn Müürsepp

    Müürsepp, Evelyn

    2005-01-01

    Minskis toimunud RAM 7-st (Reapproaching New Media. Models of Collaboration / Ümberhinnates uut meediat. Koostöömudelid". Korraldajad Tatjana Dushina ja Denis Romanovski üritavad luua uue meedia keskust Valgevene kunstiakadeemiasse. Eestit esindasid Evelin Müürsepp ja John Grzinich (modereeris vabade ülikoolide kursust). Osalemisest fotomängus "FotoOhota"

  6. Applications of the Regional Atmospheric Modeling System (RAMS) to provide input to photochemical grid models for the Lake Michigan Ozone Study (LMOS)

    Lyons, W.A.; Tremback, C.J.; Pielke, R.A. [ASTeR, Inc., Ft. Collins, CO (United States); Eastman, J.L. [Colorado State Univ., Ft. Collins, CO (United States)

    1994-12-31

    In spite of stringent emission controls, numerous exceedances of the US ozone air quality standard have continued in the Lake Michigan region, especially during the very hot summers of 1987 and 1988. Analyses revealed that exceedances of the 120 PPB hourly standard were 400% more likely at monitors located within 20 km of the lakeshore. While the role of Lake Michigan in exacerbating regional air quality problems has been investigated for almost 20 years, the relative impacts of various phenomena upon regional photochemical air quality have yet to be quantified. In order to design a defensible regional emission control policy, LMOS sponsored the development of a comprehensive regional photochemical modeling system. This is comprised of an emission model, an advanced regional photochemical model, and a prognostic meteorological model.

  7. Impact of Micro-to Meso-scale Fractures on Sealing Behavior of Argillaceous Cap Rocks For CO2 Sequestration

    Evans, James [Utah State Univ., Logan, UT (United States)

    2016-08-01

    This multi-disciplinary project evaluated seal lithologies for the safety and security of long-term geosequestration of CO2. We used integrated studies to provide qualitative risk for potential seal failure; we integrated data sets from outcrop, core, geochemical analysis, rock failure properties from mechanical testing, geophysical wireline log analysis, and geomechanical modeling to understand the effects of lithologic heterogeneity and changing mechanical properties have on the mechanical properties of the seal. The objectives of this study were to characterize cap rock seals using natural field analogs, available drillhole logging data and whole-rock core, geochemical and isotopic analyses. Rock deformation experiments were carried out on collected samples to develop better models of risk estimation for potential cap rock seal failure. We also sampled variably faulted and fractured cap rocks to examine the impacts of mineralization and/or alteration on the mechanical properties. We compared CO2 reacted systems to non-CO2 reacted seal rock types to determine response of each to increased pore fluid pressures and potential for the creation of unintentional hydrofractures at depth.

  8. Improving a spatial rainfall product using a data-mining approach and its effect on the hydrological response of a meso-scale catchment.

    Oriani, F.; Stisen, S.; Demirel, C.

    2017-12-01

    The spatial representation of rainfall is of primary importance to correctly study the uncertainty of basin recharge and its propagation to the surface and underground circulation. We consider here the daily grid rainfall product provided by the Danish Meteorological Institute as input to the National Water Resources Model of Denmark. Due to a drastic reduction in the rain gauge network (from approximately 500 stations in the period 1996-2006, to 250 in the period 2007-2014), the grid rainfall product, based on the interpolation of these data, is much less reliable. The research is focused on the Skjern catchment (1,050 km2 western Jutland), where we can dispose of the complete rain-gauge database from the Danish Hydrological Observatory and compute the distributed hydrological response at the 1-km scale.To give a better estimation of the gridded rainfall input, we start from ground measurements by simulating the missing data with a stochastic data-mining approach, then we compute again the grid interpolation. To maximize the predictive power of the technique, combinations of station time-series that are the most informative to each other are selected on the basis of their correlation and available historical data. Then, the missing data inside these time-series are simulated together using the direct sampling technique (DS) [1, 2]. DS simulates a datum by sampling the historical record of the same stations where a similar data pattern occurs, preserving their complex statistical relation. The simulated data are reinjected in the whole dataset and used as well as conditioning data to progressively fill up the gaps in other stations.The results show that the proposed methodology, tested on the period 1995-2012, can increase the realism of the grid rainfall product by regenerating the missing ground measurements. The hydrological response is analyzed considering the observations at 5 hydrological stations. The presented methodology can be used in many regions to

  9. The neurobiology of sexual partner preferences in rams.

    Roselli, Charles E; Stormshak, Fred

    2009-05-01

    The question of what causes a male animal to seek out and choose a female as opposed to another male mating partner is unresolved and remains an issue of considerable debate. The most developed biologic theory is the perinatal organizational hypothesis, which states that perinatal hormone exposure mediates sexual differentiation of the brain. Numerous animal experiments have assessed the contribution of perinatal testosterone and/or estradiol exposure to the development of a male-typical mate preference, but almost all have used hormonally manipulated animals. In contrast, variations in sexual partner preferences occur spontaneously in domestic rams, with as many as 8% of the population exhibiting a preference for same-sex mating partners (male-oriented rams). Thus, the domestic ram is an excellent experimental model to study possible links between fetal neuroendocrine programming of neural mechanisms and adult sexual partner preferences. In this review, we present an overview of sexual differentiation in relation to sexual partner preferences. We then summarize results that test the relevance of the organizational hypothesis to expression of same-sex sexual partner preferences in rams. Finally, we demonstrate that the sexual differentiation of brain and behavior in sheep does not depend critically on aromatization of testosterone to estradiol.

  10. The Neurobiology of Sexual Partner Preferences in Rams

    Roselli, Charles E.; Stormshak, Fred

    2009-01-01

    The question of what causes a male animal to seek out and choose a female as opposed to another male mating partner is unresolved and remains an issue of considerable debate. The most developed biologic theory is the perinatal organizational hypothesis, which states that perinatal hormone exposure mediates sexual differentiation of the brain. Numerous animal experiments have assessed the contribution of perinatal testosterone and/or estradiol exposure to the development of a male-typical mate preference, but almost all have used hormonally manipulated animals. In contrast, variations in sexual partner preferences occur spontaneously in domestic rams, with as many as 8% of the population exhibiting a preference for same-sex mating partners (male-oriented rams). Thus, the domestic ram is an excellent experimental model to study possible links between fetal neuroendocrine programming of neural mechanisms and adult sexual partner preferences. In this review, we present an overview of sexual differentiation in relation to sexual partner preferences. We then summarize results that test the relevance of the organizational hypothesis to expression of same-sex sexual partner preferences in rams. Finally, we demonstrate that the sexual differentiation of brain and behavior in sheep do not depend critically on aromatization of testosterone to estradiol. PMID:19446078

  11. Ram and Buck Breeding Soundness Examination

    Ahmed TIBARY

    2018-06-01

    Full Text Available Male breeding soundness examination (BSE is an important component of sheep and goat farming. BSE is best performed 2 months before the breeding season and is based on clinical and physical examination as well as sperm abnormalities detection. Rams are classified based on physical examination and semen evaluation finding in one of 4 categories: Unsatisfactory, questionable, satisfactory, and excellent. The satisfactory rams will achieve good reproductive performance if joined to ewes at a ratio of 1:50 for 60 days. However exceptional rams are expected to achieve good reproductive performance at a ratio of 1 ram to 100 ewes. For Buck, scrotal circumference should be at least 25 cm for breeds weighing more than 40 kg. Buck is deemed satisfactory breeder if he passes the physical examination, and has an ejaculate with at least 50% progressively motile spermatozoa and less than 30% total sperm abnormalities. This paper reviews factors affecting fertility, sperm production and quality as well as libido and mating ability in the ram. Details of genital examination and semen evaluation and interpretation of results are discussed. Classification of rams according to their reproductive potential is presented. Specific recommendations, when available for the buck, are highlighted. The main genital diseases are presented. The most frequent culling reason for ram is epididymitis due to Brucella ovis. Systematic culling of rams with epididymitis improves flock lambing rates by 10 to 15%. Overall, the examination of the reproductive capacity in the ram and the buck is an important tool for improvement of flocks/herds fertility and prevention of contagious or hereditary diseases.

  12. Modelling the internal boundary layer over the lower fraser valley, British Columbia

    Batchvarova, E. [National Inst. of Meteorology and Hydrology, Sofia (Bulgaria); Steyn, D. [Univ. of British Columbia, Dept. of Geography, Vancouver (Canada); Cai, X. [Univ. of Birmingham, School of Geography, Edgbaston (United Kingdom); Gryning, S.E. [Risoe National Lab., Roskilde (Denmark); Baldi, M. [Inst. for Atmospheric Physics, IFA-CNR, Rome (Italy)

    1997-10-01

    In this study we use the very extensive data-set on temporal and spatial structure of the internal boundary layer on the Lower Faser Valley, Canada, collected during the so-called Pacific `93 field campaign, to study the ability of the simple applied model by Gryning and Batchvarova (1996) and the CSU-RAMS meso-scale model summarised in Pielke et al. (1992) to describe the development and variability of the internal boundary layer depth during the course of a day. Given the complexity of topography, coastline and land-use in the Lower Fraser Valley region, both models perform remarkably well. The simple applied model performs extremely well, given its simplicity. It is clear that correct specification of spatially resolved surface sensible heat flux and wind field are crucial to the success of this model which can be operated at very fine spatial resolution. The 3D model performs extremely well, though it too must capture the local wind field correctly for complete success. Its limited horizontal resolution results in strongly smoothed internal boundary layer height fields. (LN)

  13. Energy-Saving RAM-Power Tap

    Bruner, Alan Roy

    1987-01-01

    Reverse-flow HEXFET(R) minimizes voltage drop and power dissipation. HEXFET(R) scheme reduces voltage drop by approximately 80 percent. Design for power tap for random-access memory (RAM) has potential application in digital systems.

  14. Investigating EMIC Wave Dynamics with RAM-SCB-E

    Jordanova, V. K.; Fu, X.; Henderson, M. G.; Morley, S.; Welling, D. T.; Yu, Y.

    2017-12-01

    The distribution of ring current ions and electrons in the inner magnetosphere depends strongly on their transport in realistic electric (E) and magnetic (B) fields and concurrent energization or loss. To investigate the high variability of energetic particle (H+, He+, O+, and electron) fluxes during storms selected by the GEM Surface Charging Challenge, we use our kinetic ring current model (RAM) two-way coupled with a 3-D magnetic field code (SCB). This model was just extended to include electric field calculations, making it a unique, fully self-consistent, anisotropic ring current-atmosphere interactions model, RAM-SCB-E. Recently we investigated electromagnetic ion cyclotron (EMIC) instability in a local plasma using both linear theory and nonlinear hybrid simulations and derived a scaling formula that relates the saturation EMIC wave amplitude to initial plasma conditions. Global dynamic EMIC wave maps obtained with our RAM-SCB-E model using this scaling will be presented and compared with statistical models. These plasma waves can affect significantly both ion and electron precipitation into the atmosphere and the subsequent patterns of ionospheric conductance, as well as the global ring current dynamics.

  15. FPS-RAM: Fast Prefix Search RAM-Based Hardware for Forwarding Engine

    Zaitsu, Kazuya; Yamamoto, Koji; Kuroda, Yasuto; Inoue, Kazunari; Ata, Shingo; Oka, Ikuo

    Ternary content addressable memory (TCAM) is becoming very popular for designing high-throughput forwarding engines on routers. However, TCAM has potential problems in terms of hardware and power costs, which limits its ability to deploy large amounts of capacity in IP routers. In this paper, we propose new hardware architecture for fast forwarding engines, called fast prefix search RAM-based hardware (FPS-RAM). We designed FPS-RAM hardware with the intent of maintaining the same search performance and physical user interface as TCAM because our objective is to replace the TCAM in the market. Our RAM-based hardware architecture is completely different from that of TCAM and has dramatically reduced the costs and power consumption to 62% and 52%, respectively. We implemented FPS-RAM on an FPGA to examine its lookup operation.

  16. RAMS data collection under Arctic conditions

    Barabadi, Abbas; Tobias Gudmestad, Ove; Barabady, Javad

    2015-01-01

    Reliability, availability, maintainability and supportability analysis is an important step in the design and operation of production processes and technology. Historical data such as time between failures and time to repairs play an important role in such analysis. The data must reflect the conditions that equipment has experienced during its operating time. To have a precise understanding of the conditions experienced, all influence factors on the failure and repair processes of a production facility in Arctic environment need to be identified and collected in the database. However, there is a lack of attention to collect the effect of influence factors in the reliability, availability, maintainability and supportability database. Hence, the aim of this paper is to discuss the challenges of the available methods of data collection and suggest a methodology for data collection considering the effect of environmental conditions. Application of the methodology will make the historical RAMS data of a system more applicable and useful for the design and operation of the system in different types of operational environments. - Highlights: • The challenges related to use of the available RAMS data is discussed. • It is important to collect information about operational condition in RAMS data. • A methodology for RAMS data collection considering environment condition is suggested. • Information about influence factors will make the result of RAMS analysis more applicable

  17. Beta irradiation as a method of the static MOS RAM memories processing and circuit design verification

    Wislowski, J.; Jagusztyn, M.

    1985-01-01

    1K NMOS RAM's in plastic packages were investigated after beta irradiation up to 100 Gy (Si) total dose. The memory samples differed as regards processing details and circuit design. Radioisotope beta sources were used for irradiation as the most safe and least expensive. A new version of the model of radiation-induced functional degradation of MOS RAM's has been proposed. 19 refs., 8 figs., 5 tabs. (author)

  18. Testing the importance of accurate meteorological input fields and parameterizations in atmospheric transport modelling using DREAM - Validation against ETEX-1

    Brandt, J.; Bastrup-Birk, A.; Christensen, J.H.

    1998-01-01

    A tracer model, the DREAM, which is based on a combination of a near-range Lagrangian model and a long-range Eulerian model, has been developed. The meteorological meso-scale model, MM5V1, is implemented as a meteorological driver for the tracer model. The model system is used for studying...

  19. A rate-dependent multi-scale crack model for concrete

    Karamnejad, A.; Nguyen, V.P.; Sluys, L.J.

    2013-01-01

    A multi-scale numerical approach for modeling cracking in heterogeneous quasi-brittle materials under dynamic loading is presented. In the model, a discontinuous crack model is used at macro-scale to simulate fracture and a gradient-enhanced damage model has been used at meso-scale to simulate

  20. National RAM transport regulations implementation in Russia

    Gubanov, V.A.

    1995-01-01

    A brief review is given of the main provisions of the state regulation and safety assurance of RAM transport in Russia. This appears to be useful to various persons and organisations abroad, concerned with such transport in Russia. Two aspects of the system are presented - regulatory documents (normative-technical documentation) and regulatory and control activities of state organisations. (Author)

  1. Rumenolith formation in a Bapedi ram

    Rhoda Leask

    2012-04-01

    Full Text Available During a routine flock visit, a farmer observed that one of the eight tooth Bapedi rams had been losing body condition despite being separated from the flock and fed supplementary feed. The ram’s body condition score was assessed as 2 out of 5 (one point less than the average of the rest of the rams and the teeth appeared normal with no excessive wear. The rumen was assessed by auscultation, palpation and ballottement where a foreign body (approximately 20 cm × 5 cm – 10 cm was clearly palpated and ballotted. A rumenotomy was performed and a large mass of tightly compacted foreign matter and plant material was removed. The mass consisted of synthetic fibre, plant material and calcium phosphate (50.5%. It appeared to have formed as the result of the ingestion of a synthetic fibre which formed the nidus of a concretion. This was probably the result of deficient nutrition, with the rams eating the synthetic fibre in an attempt to increase feed intake. The ram recovered uneventfully after the rumenotomy was performed and supplementary feeding.

  2. Perfectly Secure Oblivious RAM without Random Oracles

    Damgård, Ivan Bjerre; Meldgaard, Sigurd Torkel; Nielsen, Jesper Buus

    2011-01-01

    We present an algorithm for implementing a secure oblivious RAM where the access pattern is perfectly hidden in the information theoretic sense, without assuming that the CPU has access to a random oracle. In addition we prove a lower bound on the amount of randomness needed for implementing...

  3. Semen Characteristics of the West African Dwarf Rams in The ...

    WAD) rams in Makurdi. Semen samples were collected from five rams twice a week by electroejaculation method over a period of two months (September to October). The ejaculate volume, concentration, mass activity, progressive motility, the ...

  4. SPRAYTRAN USER'S GUIDE: A GIS-BASED ATMOSPHERIC SPRAY DROPLET DISPERSION MODELING SYSTEM

    The offsite drift of pesticide from spray operations is an ongoing source of concern. The SPRAY TRANsport (SPRAYTRAN) system, documented in this report, incorporates the near-field spray application model, AGDISP, into a meso-scale atmospheric transport model. The AGDISP model ...

  5. A comparison of RAM importance measures

    Atwood, C.L.; Wolford, A.J.; Wright, R.E.

    1989-01-01

    In this paper measures of importance of components and cut sets of a system are reviewed. The measures considered are based on reliability, availability, and maintainability, the three elements of the acronym RAM. They follow the approaches of Fussell and Vesely and of Birnbaum. A new Birnbaum-type unmaintainability importance measure is proposed. The measures are compared in a simple example, and the appropriate use of unmaintainability importance is discussed

  6. Experimental and numerical investigation of ram extrusion of bread dough

    Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

    2016-10-01

    An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

  7. State-Transition-Aware Spilling Heuristic for MLC STT-RAM-Based Registers

    Yuanhui Ni

    2017-01-01

    Full Text Available Multilevel Cell Spin-Transfer Torque Random Access Memory (MLC STT-RAM is a promising nonvolatile memory technology to build registers for its natural immunity to electromagnetic radiation in rad-hard space environment. Unlike traditional SRAM-based registers, MLC STT-RAM exhibits unbalanced write state transitions due to the fact that the magnetization directions of hard and soft domains cannot be flipped independently. This feature leads to nonuniform costs of write states in terms of latency and energy. However, current SRAM-targeting register allocations do not have a clear understanding of the impact of the different write state-transition costs. As a result, those approaches heuristically select variables to be spilled without considering the spilling priority imposed by MLC STT-RAM. Aiming to address this limitation, this paper proposes a state-transition-aware spilling cost minimization (SSCM policy, to save power when MLC STT-RAM is employed in register design. Specifically, the spilling cost model is first constructed according to the linear combination of different state-transition frequencies. Directed by the proposed cost model, the compiler picks up spilling candidates to achieve lower power and higher performance. Experimental results show that the proposed SSCM technique can save energy by 19.4% and improve the lifetime by 23.2% of MLC STT-RAM-based register design.

  8. Methodology for assessing the safety of Hydrogen Systems: HyRAM 1.1 technical reference manual

    Groth, Katrina; Hecht, Ethan; Reynolds, John Thomas; Blaylock, Myra L.; Erin E. Carrier

    2017-03-01

    The HyRAM software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM is designed to facilitate the use of state-of-the-art science and engineering models to conduct robust, repeatable assessments of hydrogen safety, hazards, and risk. HyRAM is envisioned as a unifying platform combining validated, analytical models of hydrogen behavior, a stan- dardized, transparent QRA approach, and engineering models and generic data for hydrogen installations. HyRAM is being developed at Sandia National Laboratories for the U. S. De- partment of Energy to increase access to technical data about hydrogen safety and to enable the use of that data to support development and revision of national and international codes and standards. This document provides a description of the methodology and models contained in the HyRAM version 1.1. HyRAM 1.1 includes generic probabilities for hydrogen equipment fail- ures, probabilistic models for the impact of heat flux on humans and structures, and computa- tionally and experimentally validated analytical and first order models of hydrogen release and flame physics. HyRAM 1.1 integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing hydrogen hazards (thermal effects from jet fires, overpressure effects from deflagrations), and assessing impact on people and structures. HyRAM is a prototype software in active development and thus the models and data may change. This report will be updated at appropriate developmental intervals.

  9. Integrating RAMS engineering and management with the safety life cycle of IEC 61508

    Lundteigen, Mary Ann; Rausand, Marvin; Utne, Ingrid Bouwer

    2009-01-01

    This article outlines a new approach to reliability, availability, maintainability, and safety (RAMS) engineering and management. The new approach covers all phases of the new product development process and is aimed at producers of complex products like safety instrumented systems (SIS). The article discusses main RAMS requirements to a SIS and presents these requirements in a holistic perspective. The approach is based on a new life cycle model for product development and integrates this model into the safety life cycle of IEC 61508. A high integrity pressure protection system (HIPPS) for an offshore oil and gas application is used to illustrate the approach.

  10. Dose calculation for atmospheric releases from a nuclear accident using RAMS/HYPACT

    Tamura, Junji; Tomita, Kenichi; Homma, Toshimitsu

    2004-01-01

    This paper describes the investigation of uncertainties in the structure of the atmospheric dispersion/deposition model used in the probabilistic accident consequence assessment code, OSCAAR. To investigate these uncertainties, we have introduced the more sophisticated computer codes, RAMS and HYPACT, which were widely used in the research field of atmospheric phenomena. In this work, the capabilities of the HYPACT model were extended for use in accident consequence assessments. The preliminary comparison between the predictions by OSCAAR and those by RAMS/HYPACT were conducted for both individual and collective consequences in terms of probabilistic results. (author)

  11. Effect of breed and age on sexual behaviour of rams.

    Simitzis, Panagiotis E; Deligeorgis, Stelios G; Bizelis, Joseph A

    2006-05-01

    The objective of this study was to highlight the problems that arise during the reproduction between thin-tailed rams and fat-tailed ewes. At the same time, particular emphasis laid on the influence of sheep breed, sheep age, time after ram introduction and day of the ewe estrus cycle on ram and ewe sexual behaviour. Rams were subjected to sexual performance tests by being individually exposed to 12 ewes for 3 h daily, 19 consecutive days. The 16 rams of the experiment were separated according to their age (9 and 21 months old) and breed (Chios and Karagouniki), and the 96 ewes of Chios fat-tailed breed, were divided by age (9 and 21 months old). The main characteristics of courtship behaviour, like sniffing, nudging, flehmen response and following were recorded and studied in detail. Mature Chios rams, which were the only one with previous experience of Chios ewes, exhibited higher rates of sexual interest per ewe than the other rams (P nudged more young than mature ewes (P behaviour when they courted with Chios fat-tailed ewes in comparison with Chios rams (P behaviour components decreased (P < 0.001). Finally, the effect of the day of the experiment was only significant in the case of sniffing, which increased during the first 2 days and then declined and stabilized (P < 0.01). As it was demonstrated, ram age and ram breed played a fundamental role in the exhibition of sexual interest elements.

  12. Radiation-hardened nonvolatile MNOS RAM

    Wrobel, T.F.; Dodson, W.H.; Hash, G.L.; Jones, R.V.; Nasby, R.D.; Olson, R.J.

    1983-01-01

    A radiation hardened nonvolatile MNOS RAM is being developed at Sandia National Laboratories. The memory organization is 128 x 8 bits and utilizes two p-channel MNOS transistors per memory cell. The peripheral circuitry is constructed with CMOS metal gate and is processed with standard Sandia rad-hard processing techniques. The devices have memory retention after a dose-rate exposure of 1E12 rad(Si)/s, are functional after total dose exposure of 1E6 rad(Si), and are dose-rate upset resistant to levels of 7E8 rad(Si)/s

  13. CEPRAM: Compression for Endurance in PCM RAM

    González Alberquilla, Rodrigo; Castro Rodríguez, Fernando; Piñuel Moreno, Luis; Tirado Fernández, Francisco

    2017-01-01

    We deal with the endurance problem of Phase Change Memories (PCM) by proposing Compression for Endurance in PCM RAM (CEPRAM), a technique to elongate the lifespan of PCM-based main memory through compression. We introduce a total of three compression schemes based on already existent schemes, but targeting compression for PCM-based systems. We do a two-level evaluation. First, we quantify the performance of the compression, in terms of compressed size, bit-flips and how they are affected by e...

  14. The modification and application of RAMS computer code. Final report

    McKee, T.B.

    1995-01-01

    The Regional Atmospheric Modeling System (RAMS) has been utilized in its most updated form, version 3a, to simulate a case night from the Atmospheric Studies in COmplex Terrain (ASCOT) experimental program. ASCOT held a wintertime observational campaign during February, 1991 to observe the often strong drainage flows which form on the Great Plains and in the canyons embedded within the slope from the Continental Divide to the Great Plains. A high resolution (500 m grid spacing) simulation of the 4-5 February 1991 case night using the more advanced turbulence closure now available in RAMS 3a allowed greater analysis of the physical processes governing the drainage flows. It is found that shear interaction above and within the drainage flow are important, and are overpredicted with the new scheme at small grid spacing (< ∼1000 m). The implication is that contaminants trapped in nighttime stable flows such as these, will be mixed too strongly in the vertical reducing predicted ground concentrations. The HYPACT code has been added to the capability at LANL, although due to the reduced scope of work, no simulations with HYPACT were performed

  15. Ferroelectric materials for FeRAMs; FeRAM yo kyoyudentai zairyo

    Miyasaka, Y [NEC Corp., Tokyo (Japan)

    1998-10-01

    Studies to utilize bistable spontaneous polarization of ferroelectric materials for non-volatile memory have already been started in the 1950`s. Recently, a possibility was indicated on a high-speed non-volatile RAM (FeRAM) with memory cell configuration combined with switching transistors as in DRAMs. This situation has led to performing very active studies on ferroelectric materials and electrode materials used in ferroelectric film cell capacitors. This paper summarizes the above research and development circumstances, as well as their future problems. On the other hand of having shown excellent fatigue resistance in the SrBi2Ta209(SBT) system, improvement has progressed steadily on the Pb(ZR, Ti)03 (abbreviated to PZT) system, which retains the mainstream position as the ferroelectric material for FeRAMs. Aiming at realizing a high integration FeRAM in the future will require discussions on property changes due to use of lower temperature and micronization in film formation, further improvement in relation with degradation such as in imprint, and elucidation of the mechanism. 31 refs., 3 figs.

  16. SeaRAM: an evaluation of the safety of RAM transport by sea

    McConnell, P.; Sorenson, K.B.; Carter, M.H.; Keane, M.P.; Keith, V.F.; Heid, R.J.

    1995-01-01

    SeaRAM is a multi-year Department of Energy (DOE) project designed to validate the safety of shipping radioactive materials (RAM) by sea. The project has an ultimate goal of developing and demonstrating analytic tools for performing comprehensive analyses to evaluate the risks to humans and the environment due to sea transport of plutonium, vitrified high-level waste (VHLW), and spent fuel associated with reprocessing and research reactors. To achieve this end, evaluations of maritime databases and structural an thermal analyses of particular severe collision and fire accidents have been and will continue to be conducted. Program management for SeaRAM is based at the DOE's Office of Environmental Restoration. Technical activities for the project are being conducted at Sandia National Laboratories (SNL). Several private organizations are also involved in providing technical support, notably Engineering Computer Optecnomics, Inc. (ECO). The technical work performed for SeaRAM also supports DOE participation in an International Atomic Energy Agency (IAEA) Cooperative Research Program (CRP) entitled Accident Severity at Sea During Transport of Radioactive Material. This paper discusses activities performed during the first year of the project

  17. A simple parameterization of aerosol emissions in RAMS

    Letcher, Theodore

    Throughout the past decade, a high degree of attention has been focused on determining the microphysical impact of anthropogenically enhanced concentrations of Cloud Condensation Nuclei (CCN) on orographic snowfall in the mountains of the western United States. This area has garnered a lot of attention due to the implications this effect may have on local water resource distribution within the Region. Recent advances in computing power and the development of highly advanced microphysical schemes within numerical models have provided an estimation of the sensitivity that orographic snowfall has to changes in atmospheric CCN concentrations. However, what is still lacking is a coupling between these advanced microphysical schemes and a real-world representation of CCN sources. Previously, an attempt to representation the heterogeneous evolution of aerosol was made by coupling three-dimensional aerosol output from the WRF Chemistry model to the Colorado State University (CSU) Regional Atmospheric Modeling System (RAMS) (Ward et al. 2011). The biggest problem associated with this scheme was the computational expense. In fact, the computational expense associated with this scheme was so high, that it was prohibitive for simulations with fine enough resolution to accurately represent microphysical processes. To improve upon this method, a new parameterization for aerosol emission was developed in such a way that it was fully contained within RAMS. Several assumptions went into generating a computationally efficient aerosol emissions parameterization in RAMS. The most notable assumption was the decision to neglect the chemical processes in formed in the formation of Secondary Aerosol (SA), and instead treat SA as primary aerosol via short-term WRF-CHEM simulations. While, SA makes up a substantial portion of the total aerosol burden (much of which is made up of organic material), the representation of this process is highly complex and highly expensive within a numerical

  18. Error analysis and prevention of cosmic ion-induced soft errors in static CMOS RAMS

    Diehl, S.E.; Ochoa, A. Jr.; Dressendorfer, P.V.; Koga, R.; Kolasinski, W.A.

    1982-06-01

    Cosmic ray interactions with memory cells are known to cause temporary, random, bit errors in some designs. The sensitivity of polysilicon gate CMOS static RAM designs to logic upset by impinging ions has been studied using computer simulations and experimental heavy ion bombardment. Results of the simulations are confirmed by experimental upset cross-section data. Analytical models have been extended to determine and evaluate design modifications which reduce memory cell sensitivity to cosmic ions. A simple design modification, the addition of decoupling resistance in the feedback path, is shown to produce static RAMs immune to cosmic ray-induced bit errors

  19. Windsock memory COnditioned RAM (CO-RAM) pressure effect: Forced reconnection in the Earth's magnetotail

    Vörös, Z.; Facskó, G.; Khodachenko, M.; Honkonen, I.; Janhunen, P.; Palmroth, M.

    2014-08-01

    Magnetic reconnection (MR) is a key physical concept explaining the addition of magnetic flux to the magnetotail and closed flux lines back-motion to the dayside magnetosphere. This scenario elaborated by Dungey (1963) can explain many aspects of solar wind-magnetosphere interaction processes, including substorms. However, neither the Dungey model nor its numerous modifications were able to explain fully the onset conditions for MR in the tail. In this paper, we introduce new onset conditions for forced MR in the tail. We call our scenario the "windsock memory conditioned ram pressure effect." Our nonflux transfer-associated forcing is introduced by a combination of the large-scale windsock motions exhibiting memory effects and solar wind dynamic pressure actions on the nightside magnetopause during northward oriented interplanetary magnetic field (IMF). Using global MHD Grand Unified Magnetosphere Ionosphere Coupling Simulation version 4 simulation results, upstream data from Wind, magnetosheath data from Cluster 1 and distant tail data from the two-probe Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun mission, we show that the simultaneous occurrence of vertical windsock motions of the magnetotail and enhanced solar wind dynamic pressure introduces strong nightside disturbances, including enhanced electric fields and persistent vertical cross-tail shear flows. These perturbations, associated with a stream interaction region in the solar wind, drive MR in the tail during episodes of northward oriented interplanetary magnetic field (IMF). We detect MR indirectly, observing plasmoids in the tail and ground-based signatures of earthward moving fast flows. We also consider the application to solar system planets and close-in exoplanets, where the proposed scenario can elucidate some new aspects of solar/stellar wind-magnetosphere interactions.

  20. Membangun Sistem Linux Mandrake Minimal Menggunakan Inisial Disk Ram

    Wagito, Wagito

    2006-01-01

    Minimal Linux system is commonly used for special systems like router, gateway, Linux installer and diskless Linux system. Minimal Linux system is a Linux system that use a few facilities of all Linux capabilities. Mandrake Linux, as one of Linux distribution is able to perform minimal Linux system. RAM is a computer resource that especially used as main memory. A part of RAM's function can be changed into disk called RAM disk. This RAM disk can be used to run the Linux system. This ...

  1. Ramón Cote Baraibar

    Juan Gustavo Cobo Borda

    2005-05-01

    Full Text Available Hijo de poeta, como María Mercedes Carranza y Santiago Mutis, Ramón Cote nació en Cúcuta el 19 de mayo de 1963- Su primer libro fue publicado en 1984 por ediciones Arnao, de Madrid, donde se graduó en historia del arte en la Universidad Complutense. Al instalarse en Colombia, se dedicó a la publicidad. Ha publicado ensayos sobre poesía colombiana en revistas como ínsula, y en 1992, con el título de  |Diez de ultramar publicó una muestra de joven poesía latinoamericana que abarcaba nombres como José Luis Rivas, Coral Bracho, Raúl Zurita, Fabio Morabito, Yolanda Pantin y Eduardo Chirinos. Entre la nueva poesía colombiana, su voz es una de las más reconocibles. Vale la pena, entonces, repasar la totalidad de su trayectoria.

  2. Radiation Level Changes at RAM Package Surfaces

    Opperman, Erich [Washington Savannah River Company; Hawk, Mark B [ORNL; Kapoor, Ashok [U.S. Department of Energy, Office of Packaging and Transportation; Natali, Ronald [R. B. Natali Consulting, Inc.

    2010-01-01

    This paper will explore design considerations required to meet the regulations that limit radiation level variations at external surfaces of radioactive material (RAM) packages. The radiation level requirements at package surfaces (e.g. TS-R-1 paragraphs 531 and 646) invoke not only maximum radiation levels, but also strict limits on the allowable increase in the radiation level during transport. This paper will explore the regulatory requirements by quantifying the amount of near surface movement and/or payload shifting that results in a 20% increase in the radiation level at the package surface. Typical IP-2, IP-3, Type A and Type B packaging and source geometries will be illustrated. Variations in surface radiation levels are typically the result of changes in the geometry of the surface due to an impact, puncture or crush event, or shifting and settling of radioactive contents.

  3. Fire effects in Pinus uncinata Ram plantations

    Adrián Cardil Forradellas

    2016-04-01

    Full Text Available Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU. PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future.Area of study: Cabdella fire (February 2012, in Lleida province, is one of the several wildland fires occurred in 2012 (winter season in the Central Pyrenees. Fire affected a large PU plantation (102 ha located at 1.800-2,100 meters above the sea.Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height.Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume.Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior.Abbreviations used: PU: Pinus uncinata Ram.

  4. Performance of growing Yankasa rams Fed graded levels of ...

    A feeding trial which lasted eight (8) weeks was carried out to determine the intake and nutrient digestibility by growing Yankasa rams fed graded levels of Tamarindus indica leaves. Twelve Yankasa rams with average liveweight of 17.40kg were randomly allocated to three treatments of four replicates in a Randomized ...

  5. Seasonal variation in semen quality of Dorper rams using different ...

    Seasonal variation in semen quality of Dorper rams using different collection ... libitum throughout the trial, and all rams being fed a 2.5 kg maintenance diet per day. ... quality collected by the AV versus the EE collection method was recorded.

  6. Design and verification of a self-timed RAM

    Nielsen, Lars Skovby; Staunstrup, Jørgen

    1995-01-01

    This paper describes a self-timed static RAM. A single bit RAM is described in the design language SYNCHRONIZED TRANSITIONS and using the verification tools supporting this language, it is shown that the design is speed-independent. Furthermore, a transistor level implementation of the design...

  7. Radioactive material (RAM) accident/incident data analysis program

    Emerson, E.L.; McClure, J.D.

    1985-03-01

    This report describes the development of the Radioactive Material Transportation Accident/Incident Data Base (RAM-AIDB), which contains information on the occurrences of transportation accidents and incidents, for radioactive materials (RAM) that are involved in the process of transportation, loading and unloading operation, or temporary storage. These transportation operations are in support of the nuclear fuel cycle for electrical energy generation. This study analyzes in some detail basic accident/incident statistical data, RAM packaging accident response data, and the health effects associated with RAM transport accidents/incidents. This report presents a summary of US RAM transport accident/incident experience for the period 1971 through December 1981. In addition, a sample annual summary of accident/incident experience is presented for the calendar year 1981

  8. De las Greguerias: Ah, Ramón, Ramón...

    Luis Navarro

    1964-11-01

    Full Text Available Yo me pregunto qué hará a hora Ramón detrás del biombo irreversible de la muerte. Me lo figuro de espaldas a la pared, con el rostro de simulada contrición y en las manos un blok sobre el que escribe eternamente, renglón tras renglón, las palabras de castigo: "No volveré a hacer burla de las cosas trascendentes". Lope, Quevedo, Goya, Solana y el Marqués de Bradomin, liberados ya de sus respectivos sambenitos en el tiempo metafísico de los muertos, intercederán por el castigado colocando en la terrible Balanza de los Cielos, a favor de Ramón, los libros ejemplares en que este habla de aquellos. Dirán al unísono: todos hablaron de mí, pero ninguno me conoció; solo Ramón.

  9. Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

    Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

    2017-09-01

    Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

  10. Modelling of rate effects at multiple scales

    Pedersen, R.R.; Simone, A.; Sluys, L. J.

    2008-01-01

    , the length scale in the meso-model and the macro-model can be coupled. In this fashion, a bridging of length scales can be established. A computational analysis of  a Split Hopkinson bar test at medium and high impact load is carried out at macro-scale and meso-scale including information from  the micro-scale.......At the macro- and meso-scales a rate dependent constitutive model is used in which visco-elasticity is coupled to visco-plasticity and damage. A viscous length scale effect is introduced to control the size of the fracture process zone. By comparison of the widths of the fracture process zone...

  11. Investigation of advanced propulsion technologies: The RAM accelerator and the flowing gas radiation heater

    Bruckner, A. P.; Knowlen, C.; Mattick, A. T.; Hertzberg, A.

    1992-01-01

    The two principal areas of advanced propulsion investigated are the ram accelerator and the flowing gas radiation heater. The concept of the ram accelerator is presented as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerothermodynamics research. The ram accelerator is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled in a stationary tube filled with a tailored combustible gas mixture. Combustion on and behind the projectile generates thrust which accelerates it to very high velocities. The acceleration can be tailored for the 'soft launch' of instrumented models. The distinctive reacting flow phenomena that have been observed in the ram accelerator are relevant to the aerothermodynamic processes in airbreathing hypersonic propulsion systems and are useful for validating sophisticated CFD codes. The recently demonstrated scalability of the device and the ability to control the rate of acceleration offer unique opportunities for the use of the ram accelerator as a large-scale hypersonic ground test facility. The flowing gas radiation receiver is a novel concept for using solar energy to heat a working fluid for space power or propulsion. Focused solar radiation is absorbed directly in a working gas, rather than by heat transfer through a solid surface. Previous theoretical analysis had demonstrated that radiation trapping reduces energy loss compared to that of blackbody receivers, and enables higher efficiencies and higher peak temperatures. An experiment was carried out to measure the temperature profile of an infrared-active gas and demonstrate the effect of radiation trapping. The success of this effort validates analytical models of heat transfer in this receiver, and confirms the potential of this approach for achieving high efficiency space power and propulsion.

  12. MEMBANGUN SISTEM LINUX MANDRAKE MINIMAL MENGGUNAKAN INISIAL DISK RAM

    Wagito, Wagito

    2009-01-01

            Minimal Linux system is commonly used for special systems like router, gateway, Linux installer and diskless Linux system. Minimal Linux system is a Linux system that use a few facilities of all Linux capabilities. Mandrake Linux, as one of Linux distribution is able to perform minimal Linux system.         RAM is a computer resource that especially used as main memory. A  part of RAM’s function can be changed into disk called RAM disk. This RAM disk can be used to run the Linux syste...

  13. Recombination-assisted megaprimer (RAM) cloning

    Mathieu, Jacques; Alvarez, Emilia; Alvarez, Pedro J.J.

    2014-01-01

    No molecular cloning technique is considered universally reliable, and many suffer from being too laborious, complex, or expensive. Restriction-free cloning is among the simplest, most rapid, and cost-effective methods, but does not always provide successful results. We modified this method to enhance its success rate through the use of exponential amplification coupled with homologous end-joining. This new method, recombination-assisted megaprimer (RAM) cloning, significantly extends the application of restriction-free cloning, and allows efficient vector construction with much less time and effort when restriction-free cloning fails to provide satisfactory results. The following modifications were made to the protocol:•Limited number of PCR cycles for both megaprimer synthesis and the cloning reaction to reduce error propagation.•Elimination of phosphorylation and ligation steps previously reported for cloning methods that used exponential amplification, through the inclusion of a reverse primer in the cloning reaction with a 20 base pair region of homology to the forward primer.•The inclusion of 1 M betaine to enhance both reaction specificity and yield. PMID:26150930

  14. The rapid mode of calcium uptake into heart mitochondria (RaM): comparison to RaM in liver mitochondria.

    Buntinas, L; Gunter, K K; Sparagna, G C; Gunter, T E

    2001-04-02

    A mechanism of Ca(2+) uptake, capable of sequestering significant amounts of Ca(2+) from cytosolic Ca(2+) pulses, has previously been identified in liver mitochondria. This mechanism, the Rapid Mode of Ca(2+) uptake (RaM), was shown to sequester Ca(2+) very rapidly at the beginning of each pulse in a sequence [Sparagna et al. (1995) J. Biol. Chem. 270, 27510-27515]. The existence and properties of RaM in heart mitochondria, however, are unknown and are the basis for this study. We show that RaM functions in heart mitochondria with some of the characteristics of RaM in liver, but its activation and inhibition are quite different. It is feasible that these differences represent different physiological adaptations in these two tissues. In both tissues, RaM is highly conductive at the beginning of a Ca(2+) pulse, but is inhibited by the rising [Ca(2+)] of the pulse itself. In heart mitochondria, the time required at low [Ca(2+)] to reestablish high Ca(2+) conductivity via RaM i.e. the 'resetting time' of RaM is much longer than in liver. RaM in liver mitochondria is strongly activated by spermine, activated by ATP or GTP and unaffected by ADP and AMP. In heart, RaM is activated much less strongly by spermine and unaffected by ATP or GTP. RaM in heart is strongly inhibited by AMP and has a biphasic response to ADP; it is activated at low concentrations and inhibited at high concentrations. Finally, an hypothesis consistent with the data and characteristics of liver and heart is presented to explain how RaM may function to control the rate of oxidative phosphorylation in each tissue. Under this hypothesis, RaM functions to create a brief, high free Ca(2+) concentration inside mitochondria which may activate intramitochondrial metabolic reactions with relatively small amounts of Ca(2+) uptake. This hypothesis is consistent with the view that intramitochondrial [Ca(2+)] may be used to control the rate of ADP phosphorylation in such a way as to minimize the probability of

  15. A fully operational 1-kb variable threshold Josephson RAM

    Kurosawa, I.; Nakagawa, H.; Aoyagi, M.; Kosaks, S.; Takada, S.

    1991-01-01

    This paper describes the first fully operational Josephson RAM in LSI level integration. The chip was designed as a 4-b x 256-word data RAM unit for a 4-b Josephson computer, The variable threshold memory cell and the relating memory architecture were used. They are so simple in structure that the fabrication is satisfied by the current Josephson junction technology. A directly coupled driver gate for a resistive bit line applies an accurate and stable driving current to the memory cell array. The RAM chip was fabricated with a 3-μm Nb/Al-oxide/Nb junction technology. For obtaining reliable RAM chips, a plasma-enhanced CVD silicon dioxide layer was introduced for insulation between the ground plane and the base electrode. The thermal uniformity of the wafer was improved during the oxidation process for making a tunnel barrier in this work

  16. Performance and carcass characteristics of Yankasa ram fed with ...

    Remember me ... and 50% maize and wheat offal mixture, were better when compared to the control (B0) and other test diet in terms of performance and carcass characteristics. ... Key words: Performance, carcass, biscuit waste, Yankasa ram.

  17. Proteomics analysis of ram sperm by heavy ion radiation

    He Yuxuan; Li Hongyan; Zhang Hong

    2013-01-01

    The objective of this study was to investigate the proteome changes induced by heavy ion radiation using irradiated ram sperm by a two-dimensional electrophoresis (2-DE) analysis. The 2D gels were stained with Coomassie Brilliant Blue. Differentially expressed proteins were detected by PDQuest 8.0 software and subjected to ion trap mass spectrometer equipped with a surveyor HPLC system, and differential protein spots were identified. Results showed there are five differential protein spots in irradiated sperm gels, four up-regulated protein spots and one spot missed. The differentially expressed protein spots were identified to be two up-regulated proteins including enolase, and enolase 1. It was concluded there was proteome changes induced by heavy ion radiation in ram sperm, which may be useful to clarify the physiology state of ram sperm in heavy ion radiation and provide a theoretical basis for radiation ram breeding. (authors)

  18. Fire effects in Pinus uncinata Ram plantations

    Cardil Forradellas, A.; Molina Terrén, D.M.; Oliveres, J.; Castellnou, M.

    2016-07-01

    Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU). PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future. Area of study: Cabdella fire (February 2012), in Lleida province, is one of the several wildland fires occurred in 2012 (winter season) in the Central Pyrenees. Fire affected a large PU plantation (102 ha) located at 1.800-2,100 meters above the sea. Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height. Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume. Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior. (Author)

  19. The ram effect: New insights into neural modulation of the gonadotropic axis by male odors and socio-sexual interactions.

    CLAUDE eFABRE NYS

    2015-04-01

    Full Text Available Reproduction in mammals is controlled by the hypothalamo-pituitary-gonadal (HPG axis under the influence of external and internal factors such as photoperiod, stress, nutrition, and social interactions. Sheep are seasonal breeders and stop mating when day length is increasing (anestrus. However, interactions with a sexually active ram during this period can override the steroid negative feedback responsible for the anoestrus state, stimulate LH secretion and eventually reinstate cyclicity. This is known as the ram effect and research into the mechanisms underlying it is shedding new light on HPG axis regulation. The first step in the ram effect is increased LH pulsatile secretion in anestrus ewes exposed to a sexually active male or only to its fleece, the latter finding indicating a pheromone-like effect. Estradiol secretion increases in all ewes and this eventually induces a LH surge and ovulation, just as during the breeding season. An exception is a minority of ewes that exhibit a precocious LH surge (within 4h with no prior increase in estradiol. The main olfactory system and the cortical nucleus of the amygdala are critical brain structures in mediating the ram effect since it is blocked by their inactivation. Sexual experience is also important since activation (increased c-fos expression in these and other regions is greatly reduced in sexually naïve ewes. In adult ewes kisspeptin neurons in both arcuate and preoptic regions and some preoptic GnRH neurons are activated 2h after exposure to a ram. Exposure to rams also activates noradrenergic neurons in the locus coeruleus and A1 nucleus and increased noradrenalin release occurs in the posterior preoptic area. Pharmacological modulation of this system modifies LH secretion in response to the male or his odor. Together these results show that the ram effect can be a fruitful model to promote both a better understanding of the neural and hormonal regulation of the HPG axis in general and

  20. Geographic Resolution Issues in RAM Transport Risk Analysis

    Mills, G.S.; Neuhauser, K.S.

    2000-01-01

    Transport risk analyses based on the RADTRAN code have been met with continual demands for increased spatial resolution of variations in population densities and other parameters employed in the calculation of risk estimates for transport of radioactive material (RAM). With the advent of geographic information systems (GISs) large quantities of data required to describe transport routes, which may extend to hundreds of kilometers, with high resolution (e.g. 1 km segments) can be handled without inordinate expense. This capability has raised a question concerning the maximum resolution of available input data and compatibility with RADTRAN computational models. Quantitative examinations are presented of spatial resolution issues in the calculation of incident-free doses and accident dose risks. For incident-free calculations, the effect of decreasing route-segment length on accuracy, in view of the model employed, is examined, and means of reducing total data input to the RADTRAN calculations, without loss of meaningful resolution of population concentrations, are presented. In the case of accident-risk calculations, the ability to detail population density under very large dispersal plumes permits comparison of plume modelling to actual data. In both types of calculations, meaningful limits to geographic extent are suggested. (author)

  1. Radiation response of two Harris semiconductor radiation hardened 1k CMOS RAMs

    Abare, W.E.; Huffman, D.D.; Moffett, G.E.

    1982-01-01

    This paper describes the testing of two types 1K CMOS static RAMs in various transient and steady state ionizing radiation environments. Type HM 6551R (256x4 bits) and type HM 6508R (1024x1 bit) RAMs were evaluated. The RAMs are radiation hardened versions of Harris' commercial RAMs. A brief description of the radiation hardened process is presented

  2. PREPARATION OF TEASER RAMS BY LATERAL DEVIATION OF PREPUCE AND PENIS

    Rashid Ahmad

    2003-01-01

    For oestrus detection in sheep while in flocks, limited exposure is given to rams with tied apron in front of their prepucial opening. For better and un-feared use of rams for oestrus detection and for effect of , ram exposure on postpartum reproductive characteristics of ewes, rams before the attainment of puberty and those sexually mature (adult rams) were operated for lateral deviation of prepuce and penis. The operations were successful, no post operative complications were recorded and t...

  3. Soil loss risk and habitat quality in streams of a meso-scale river basin Risco de perda de solo e qualidade do habitat numa bacia hidrográfica de meso-escala

    Alexandre Marco da Silva

    2007-08-01

    Full Text Available Soil loss expectation and possible relationships among soil erosion, riparian vegetation and water quality were studied in the São José dos Dourados River basin, State of São Paulo, Brazil. Through Geographic Information System (GIS resources and technology, Soil Loss Expectation (SLE data obtained using the Universal Soil Loss Equation (USLE model were analyzed. For the whole catchment area and for the 30 m buffer strips of the streams of 22 randomly selected catchments, the predominant land use and habitat quality were studied. Owing mainly to the high soil erodibility, the river basin is highly susceptible to erosive processes. Habitat quality analyses revealed that the superficial water from the catchments is not chemically impacted but suffers physical damage. A high chemical purity is observed since there are no urban areas along the catchments. The water is physically poor because of high rates of sediment delivery and the almost nonexistence of riparian vegetation.Expectativa de perda de solo e possíveis relações entre erosão, vegetação ripária e qualidade da água foram estudados na bacia do rio São José dos Dourados (SP. Através de recursos de geoprocessamento e da Equação Universal de Perda de Solos, os dados sobre expectativa de perda de solo foram levantados. Para a área de drenagem total e a faixa tampão dos corpos d'água de 22 sub-bacias aleatoriamente selecionadas, analisou-se a cobertura do solo predominante e qualidade do habitat. Devido principalmente à alta erodibilidade do solo, a área estudada é altamente suscetível ao processo erosivo. As análises de qualidade da água revelaram que as águas superficiais das sub-bacias estão quimicamente não impactadas, mas fisicamente degradadas. A alta pureza química deve-se, possivelmente, à ausência de áreas urbanizadas ao longo das sub-bacias e as alterações nas características físicas são, possivelmente, decorrentes das altas taxas de transfer

  4. MHD simulations of ram pressure stripping of a disc galaxy

    Ramos-Martínez, Mariana; Gómez, Gilberto C.; Pérez-Villegas, Ángeles

    2018-05-01

    The removal of the interstellar medium (ISM) of disc galaxies through ram pressure stripping (RPS) has been extensively studied in numerous simulations. Nevertheless, the role of magnetic fields (MFs) on the gas dynamics in this process has been hardly studied, although the MF influence on the large-scale disc structure is well established. With this in mind, we present a 3D magnetohydrodynamic simulation of face-on RPS of a disc galaxy to study the impact of the galactic MF in the gas stripping. The main effect of including a galactic MF is a flared disc. When the intracluster medium wind hits this flared disc, oblique shocks are produced at the interaction interface, where the ISM is compressed, generating a gas inflow from large radii towards the central regions of the galaxy. This inflow is observed for {˜ } 150 {Myr} and may supply the central parts of the galaxy with material for star formation while the outskirts of the disc are being stripped of gas, thus the oblique shocks can induce and enhance the star formation in the remaining disc. We also observed that the MF alters the shape and structure of the swept gas, giving a smooth appearance in the magnetized case and clumpier and filamentary-like morphology in the hydro case. Finally, we estimated the truncation radius expected for our models using the Gunn-Gott criterion and found that that is in agreement with the simulations.

  5. Ram Pressure Stripping Made Easy: An Analytical Approach

    Köppen, J.; Jáchym, P.; Taylor, R.; Palouš, J.

    2018-06-01

    The removal of gas by ram pressure stripping of galaxies is treated by a purely kinematic description. The solution has two asymptotic limits: if the duration of the ram pressure pulse exceeds the period of vertical oscillations perpendicular to the galactic plane, the commonly used quasi-static criterion of Gunn & Gott is obtained which uses the maximum ram pressure that the galaxy has experienced along its orbit. For shorter pulses the outcome depends on the time-integrated ram pressure. This parameter pair fully describes the gas mass fraction that is stripped from a given galaxy. This approach closely reproduces results from SPH simulations. We show that typical galaxies follow a very tight relation in this parameter space corresponding to a pressure pulse length of about 300 Myr. Thus, the Gunn & Gott criterion provides a good description for galaxies in larger clusters. Applying the analytic description to a sample of 232 Virgo galaxies from the GoldMine database, we show that the ICM provides indeed the ram pressures needed to explain the deficiencies. We also can distinguish current and past strippers, including objects whose stripping state was unknown.

  6. RAM, an RGDS analog, exerts potent anti-melanoma effects in vitro and in vivo.

    Maria Simona Aguzzi

    Full Text Available Peptides containing the RGD sequence are under continuous investigation given their ability to control cell adhesion and apoptosis. Since small peptides are quickly metabolized and degraded in vivo, developing analogs resistant to serum-induced degradation is a challenging task. RGD analogs developed so far are known as molecules mostly inhibiting cell adhesion; this feature may reduce cell proliferation and tumor development but may not induce regression of tumors or metastases already formed. In the current study, carried out in melanoma in vitro and in vivo models, we show that RAM, an RGD-non-peptide Analog-Molecule, strongly inhibits cells adhesion onto plastic, vitronectin, fibronectin, laminin and von Willebrand Factor while it does not inhibit cell adhesion onto collagen IV, similarly to the RGDS template peptide. It also strongly inhibits in vitro cell proliferation, migration and DNA-synthesis, increases melanoma cells apoptosis and reduces survivin expression. All such effects were observed in collagen IV seeded cells, therefore are most likely independent from the anti adhesive properties. Further, RAM is more stable than the template RGDS; in fact it maintains its anti-proliferation and anti-adhesion effects after long serum exposure while RGDS almost completely loses its effects upon serum exposure. In a mouse metastatic melanoma in vivo model, increasing doses of RAM significantly reduce up to about 80% lung metastases development, while comparable doses of RGDS are less potent. In conclusion these data show that RAM is a potent inhibitor of melanoma growth in vitro, strongly reduces melanoma metastases development in vivo and represents a novel candidate for further in vivo investigations in the cancer treatment field.

  7. Rational mapping (RAM) of in-core data

    Bonalumi, R.A.; Kherani, N.P.

    1985-01-01

    A unique processing of in-core flux detector data is described and demonstrated, such that the detailed in-core power distribution can be derived with great accuracy by combining a speciall ''smoothed-out'' set of in-core data with neutron diffusion theory. Rational Mapping (RAM) is designed in such a way that erratic detector signals are recognized very efficiently and can be eliminated from the experimental data set: This is achieved by modal expansion of the difference between theoretical fluxes and experimental fluxes at the detector sites. Sensitivity studies have shown that RAM is quite stable, does not absorb the ''wild'' detector error in the mapping procedure, and results in mapped fluxes with errors about three times smaller than would be obtained by direct interpolation of detector readings. A new method is described to infer corrections to theoretical core parameters based on the difference between the RAM fluxes and the theoretical fluxes

  8. Meso-scale atmospheric events promote phytoplankton blooms in ...

    The Bay of Bengal is considered to be a low productive region compared to the Arabian Sea based on conventional seasonal observations. Such seasonal observations are not representative of a calendar year since the conventional approach might miss episodic high productive events associated with extreme ...

  9. La Palabra de Ramón Frediani: Las Retenciones

    Marcelo Coser

    2008-04-01

    Full Text Available En el marco del programa "Prisma Económico" del Instituto de Economía y Finanzas (IEF, Marcelo Coser, su conductor, consulta al Profesor Ramón Osvaldo Frediani, docente de la asignatura “Economía Regional y Urbana” e investigadordel Instituto. Durante la nota, Ramón Frediani nos da sus conceptos sobre las debatidas retenciones y los propósitos que éstas persiguen, brindando su visión respecto al accionar del Gobierno Nacional.

  10. RAM R-200 - A Portable Ruggedized Radiation Monitoring System

    Wengrowicz, U.; Mazor, T.; Assido, H.; Kadmon, Y.; Tirosh, D.; Shani, G.

    1999-01-01

    RAM R-200, a new generation of ruggedized portable radiation-monitoring systems, is presented. The system which is a result of interdisciplinary research, was developed at the NRCN in collaboration with Ben-Gurion University. It consists of RAM R-200 - a portable radiation meter, and a variety of external probes for wide range gamma radiation fields and beta-gamma contamination detection and measurement. The meter or each one of the external probes can be used as a portable system or a stand-alone radiation measurement station. All the system's components were specially designed to meet severe environmental conditions

  11. Using SST and land cover data from EO Missions for improved mesoscale modelling of the coastal zone

    Karagali, Ioanna; Floors, Rogier Ralph; Lea, Guillaume

    was to evaluate the uncertainty of the modelled wind in the coastal zone and further improve it. Moreover LIDAR measurements were used to evaluate the wind speed retrieval from high resolution SAR systems (Sentinel-1 and TerraSAR-X). The WRF model used a high-resolution satellite SST reanalysis product from...... be implemented in the meso-scale model to better represent the actual conditions in the study area. Such improvements are expected to strengthen the model’s ability to represent land- sea and air-sea interactions, the atmospheric stability and the local topographic features that partly affect the coastal zone......Existing wind measurements in near-shore and offshore areas are sparse and scarce, therefore simulations from state-of-the-art meso-scale models are used for wind resource predictions. In coastal and near-shore areas, models are inaccurate and uncertain, mainly because of numerical approximations...

  12. PREPARATION OF TEASER RAMS BY LATERAL DEVIATION OF PREPUCE AND PENIS

    Rashid Ahmad

    2003-07-01

    Full Text Available For oestrus detection in sheep while in flocks, limited exposure is given to rams with tied apron in front of their prepucial opening. For better and un-feared use of rams for oestrus detection and for effect of , ram exposure on postpartum reproductive characteristics of ewes, rams before the attainment of puberty and those sexually mature (adult rams were operated for lateral deviation of prepuce and penis. The operations were successful, no post operative complications were recorded and these rams exhibited normal libido and were found efficient for oestrus detection in ewes.

  13. Prevalence of gastrointestinal parasites of rams brought into ...

    In an effort to gain a better understanding into the role played by food animals in the epidemiology of gastrointestinal parasites, we assessed the prevalence of gastrointestinal parasites in different breeds of rams brought into Abeokuta during a festive season by ... The only protozoan parasite identified was Eimeria spp.

  14. Timber management planning with timber ram and goal programming

    Richard C. Field

    1978-01-01

    By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

  15. Performance and carcass characteristics of Yankasa ram fed with ...

    Administrator

    2011-05-30

    May 30, 2011 ... were randomly assign to the 5 dietary treatment with four rams per treatment. ... estimate dry matter intake (g/d /W 0.7 kg), daily mean life weight gain ... 1.78%) and rib eye area (6.06 and 8.29) which were obtained from the ...

  16. Measurement and analysis of the water hammer in ram pump

    This paper presents the results of experimental research of the phenomena occurring in water ram during a single cycle of its operation. Apart from a brief introduction and description of the test stand and data recording system, the work includes a broad interpretation of the obtained results. Based on the pressure ...

  17. Detecting danger labels with RAM-based neural networks

    Jørgensen, T.M.; Christensen, S.S.; Andersen, A.W.

    1996-01-01

    An image processing system for the automatic location of danger labels on the back of containers is presented. The system uses RAM-based neural networks to locate and classify labels after a pre-processing step involving specially designed non-linear edge filters and RGB-to-HSV conversion. Result...

  18. A realization of the RAM digital filter. [Random Access Memory

    Zohar, S.

    1976-01-01

    The digital filtering algorithm of W. D. Little, which employs a large RAM to obtain high speed, is implemented in a simple hardware configuration. The nonrecursive version of this filter is compared to the counting digital filter and found to be competitive for low-order filters up to order 7 (8 coefficients).

  19. The sexual cycle of the Impala ram Aepyceros melampus Lichtenstein

    The sexual cycle of the Impala ram Aepyceros melampus Lichtenstein. J.D. Skinner. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors ...

  20. Design and analysis of hydraulic ram water pumping system

    Hussin, N. S. M.; Gamil, S. A.; Amin, N. A. M.; Safar, M. J. A.; Majid, M. S. A.; Kazim, M. N. F. M.; Nasir, N. F. M.

    2017-10-01

    The current pumping system (DC water pump) for agriculture is powered by household electricity, therefore, the cost of electricity will be increased due to the higher electricity consumption. In addition, the water needs to be supplied at different height of trees and different places that are far from the water source. The existing DC water pump can pump the water to 1.5 m height but it cost money for electrical source. The hydraulic ram is a mechanical water pump that suitable used for agriculture purpose. It can be a good substitute for DC water pump in agriculture use. The hydraulic ram water pumping system has ability to pump water using gravitational energy or the kinetic energy through flowing source of water. This project aims to analyze and develop the water ram pump in order to meet the desired delivery head up to 3 meter height with less operation cost. The hydraulic ram is designed using CATIA software. Simulation work has been done using ANSYS CFX software to validate the working concept. There are three design were tested in the experiment study. The best design reached target head of 3 m with 15% efficiency and flow rate of 11.82l/min. The results from this study show that the less diameter of pressure chamber and higher supply head will create higher pressure.

  1. Semen characteristics of pubertal Yankasa rams fed Zingiber ...

    Ginger (Zingiber officinale) is consumed by humans and has been reported to possess medicinal uses. It possesses androgenic property with significant increase on male reproductive parameters. This study assessed the reproductive performance of Yankasa rams fed diets supplemented with different levels of ginger ...

  2. Reproductive indices of Merino rams fed sun-cured Leucaena ...

    Reproductive indices of Merino rams fed sun-cured Leucaena leucocephala forage. I.V. Nsahlai, B.K. Byebwa, M.L.K. Bonsi. Abstract. (South African J of Animal Science, 2000, 30, Supplement 1: 111-112). Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  3. Architecture of the sperm whale forehead facilitates ramming combat

    Olga Panagiotopoulou

    2016-04-01

    Full Text Available Herman Melville’s novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L. sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the “spermaceti organ” and “junk,” that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the

  4. Architecture of the sperm whale forehead facilitates ramming combat.

    Panagiotopoulou, Olga; Spyridis, Panagiotis; Mehari Abraha, Hyab; Carrier, David R; Pataky, Todd C

    2016-01-01

    Herman Melville's novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L.) sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the "spermaceti organ" and "junk," that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the spermaceti organ would

  5. The behavioral component of the ram effect: the influence of ram sexual behavior on the induction of estrus in anovulatory ewes.

    Perkins, A; Fitzgerald, J A

    1994-01-01

    The objective of this study was to test whether the sexual behavior of the ram affects the ram effect. Rams exhibiting either high (HP) or low (LP) levels of sexual performance (on the basis of serving capacity tests) were exposed to 89 anestrous ewes for 28 d. Thirty-two anestrous ewes were not exposed to rams. The objective of this study was to compare the efficacy of estrus induction by HP (n = 4) vs LP (n = 4) rams. Plasma progesterone concentration was used as an index of ovarian activity. Groups of ewes were exposed to either an HP or an LP ram in a .32-ha pasture. Courtship behaviors of rams were recorded for 6 h on the initial day of exposure and for 30-min periods on alternate days thereafter. A greater percentage of ewes exposed to HP rams ovulated (95%) compared with ewes exposed to LP rams (78%) (P sexual behavior. These data imply that in addition to a pheromone the sexual behavior of the ram may be important in initiating ovarian cycle activity.

  6. The collaborative effect of ram pressure and merging on star formation and stripping fraction

    Bischko, J. C.; Steinhauser, D.; Schindler, S.

    2015-04-01

    Aims: We investigate the effect of ram pressure stripping (RPS) on several simulations of merging pairs of gas-rich spiral galaxies. We are concerned with the changes in stripping efficiency and the time evolution of the star formation rate. Our goal is to provide an estimate of the combined effect of merging and RPS compared to the influence of the individual processes. Methods: We make use of the combined N-body/hydrodynamic code GADGET-2. The code features a threshold-based statistical recipe for star formation, as well as radiative cooling and modeling of galactic winds. In our simulations, we vary mass ratios between 1:4 and 1:8 in a binary merger. We sample different geometric configurations of the merging systems (edge-on and face-on mergers, different impact parameters). Furthermore, we vary the properties of the intracluster medium (ICM) in rough steps: the speed of the merging system relative to the ICM between 500 and 1000 km s-1, the ICM density between 10-29 and 10-27 g cm-3, and the ICM direction relative to the mergers' orbital plane. Ram pressure is kept constant within a simulation time period, as is the ICM temperature of 107 K. Each simulation in the ICM is compared to simulations of the merger in vacuum and the non-merging galaxies with acting ram pressure. Results: Averaged over the simulation time (1 Gyr) the merging pairs show a negligible 5% enhancement in SFR, when compared to single galaxies under the same environmental conditions. The SFRs peak at the time of the galaxies first fly-through. There, our simulations show SFRs of up to 20 M⊙ yr-1 (compared to 3 M⊙ yr-1 of the non-merging galaxies in vacuum). In the most extreme case, this constitutes a short-term (<50 Myr) SFR increase of 50 % over the non-merging galaxies experiencing ram pressure. The wake of merging galaxies in the ICM typically has a third to half the star mass seen in the non-merging galaxies and 5% to 10% less gas mass. The joint effect of RPS and merging, according

  7. Identification of sexually low-response rams using a libido test and ...

    higher levels of sex-like behaviour with their pen mates. (monosexual groups) during rearing than did normal rams. These workers thus suggested that the poor performance of such rams when exposed to an oestrous ewe was due to their inability to interpret sexual cues correctly. Working with. Karakul rams, Le Roux and ...

  8. THE ROLE OF RAM PRESSURE STRIPPING IN THE QUENCHING OF CLUSTER STAR FORMATION

    Book, Laura G.; Benson, Andrew J.

    2010-01-01

    Recent observations of galaxy clusters have shown that environmental effects apparently associated with the cluster begin to lower the star formation rates of galaxies at distances as great as three times the cluster virial radius. These observations may indicate preprocessing of cluster galaxies in groups or in the cluster core for galaxies on highly elliptical orbits, but may also imply that the environmental effects due to the cluster are directly affecting galaxies on their first infall. To explore these issues, we investigate different models of ram pressure stripping (RPS) as it acts on satellite galaxies in clusters and compare to observations of the radial star formation gradient in clusters. We calculate the location of the accretion shock around model clusters and use this as the radius of onset of RPS in the GALFORM semi-analytic model of galaxy formation. Comparison of the results of our model and previously considered, simpler ram pressure models with recent observations indicates that current data are unable to strongly discriminate between models of RPS due to the complex interplay of preprocessing effects at work. However, future observations of a larger sample of clusters will likely be able to place stronger constraints on the process of RPS and its role in shaping radial trends in and around clusters.

  9. Experimental Results and Issues on Equalization for Nonlinear Memory Channel: Pre-Cursor Enhanced Ram-DFE Canceler

    Yuan, Lu; LeBlanc, James

    1998-01-01

    This thesis investigates the effects of the High Power Amplifier (HPA) and the filters over a satellite or telemetry channel. The Volterra series expression is presented for the nonlinear channel with memory, and the algorithm is based on the finite-state machine model. A RAM-based algorithm operating on the receiver side, Pre-cursor Enhanced RAM-FSE Canceler (PERC) is developed. A high order modulation scheme , 16-QAM is used for simulation, the results show that PERC provides an efficient and reliable method to transmit data on the bandlimited nonlinear channel. The contribution of PERC algorithm is that it includes both pre-cursors and post-cursors as the RAM address lines, and suggests a new way to make decision on the pre-addresses. Compared with the RAM-DFE structure that only includes post- addresses, the BER versus Eb/NO performance of PERC is substantially enhanced. Experiments are performed for PERC algorithms with different parameters on AWGN channels, and the results are compared and analyzed. The investigation of this thesis includes software simulation and hardware verification. Hardware is setup to collect actual TWT data. Simulation on both the software-generated data and the real-world data are performed. Practical limitations are considered for the hardware collected data. Simulation results verified the reliability of the PERC algorithm. This work was conducted at NMSU in the Center for Space Telemetering and Telecommunications Systems in the Klipsch School of Electrical and Computer Engineering Department.

  10. GASP. IX. Jellyfish galaxies in phase-space: an orbital study of intense ram-pressure stripping in clusters

    Jaffé, Yara L.; Poggianti, Bianca M.; Moretti, Alessia; Gullieuszik, Marco; Smith, Rory; Vulcani, Benedetta; Fasano, Giovanni; Fritz, Jacopo; Tonnesen, Stephanie; Bettoni, Daniela; Hau, George; Biviano, Andrea; Bellhouse, Callum; McGee, Sean

    2018-06-01

    It is well known that galaxies falling into clusters can experience gas stripping due to ram pressure by the intra-cluster medium. The most spectacular examples are galaxies with extended tails of optically bright stripped material known as `jellyfish'. We use the first large homogeneous compilation of jellyfish galaxies in clusters from the WINGS and OmegaWINGS surveys, and follow-up MUSE observations from the GASP MUSE programme to investigate the orbital histories of jellyfish galaxies in clusters and reconstruct their stripping history through position versus velocity phase-space diagrams. We construct analytic models to define the regions in phase-space where ram-pressure stripping is at play. We then study the distribution of cluster galaxies in phase-space and find that jellyfish galaxies have on average higher peculiar velocities (and higher cluster velocity dispersion) than the overall population of cluster galaxies at all cluster-centric radii, which is indicative of recent infall into the cluster and radial orbits. In particular, the jellyfish galaxies with the longest gas tails reside very near the cluster cores (in projection) and are moving at very high speeds, which coincides with the conditions of the most intense ram pressure. We conclude that many of the jellyfish galaxies seen in clusters likely formed via fast (˜1-2 Gyr), incremental, outside-in ram-pressure stripping during first infall into the cluster in highly radial orbits.

  11. Experimental and numerical modeling of chloride diffusivity in hardened cement concrete considering the aggregate shapes and exposure-duration effects

    Wu Jie

    Full Text Available This paper presents an experimental and numerical model describing the effects of the aggregate shapes and exposure duration of chloride diffusion into cement-based materials. A simple chloride diffusion test was performed on a concrete specimen composed of a mixture of cement mortar with crushed granites and round gravels. A simulation was done and the numerical model developed was applied to the matrix at the meso-scale level and the chloride diffusivity was investigated at 30, 60, and 90 days. The experimental and simulation results showed that the aggregate shape and the exposure duration of chloride diffusing into concrete are of high significance. It was indicated that the model with crushed granite presents a good resistance against chloride ingress, while the model with rounded gravels shows some sensitivity to the chloride penetration. It was also found out that when the time dependence of the diffusion coefficient is not taken into account, the diffusion rate will be overestimated. The meso-scale model developed in this study also provides a new method applied in the analysis of the chloride and water transport that causes damage to concrete considering the particle inclusion and the diffusion duration. Keywords: Meso-scale modeling, Chloride diffusivity, Concrete, Effects of aggregates shape and exposure duration, FEM

  12. SIMULATIONS NUMERIQUES DE L'ATMOSPHERE URBAINE AVEC LE MODELE SUBMESO :
    APPLICATION A LA CAMPAGNE CLU-ESCOMPTE SUR L'AGGLOMERATION DE MARSEILLE

    Leroyer , Sylvie

    2006-01-01

    In view of understanding and forecasting pollutant dispersion in urban areas, high resolution numerical simulations are performed. The aim is to reproduce atmospheric characteristics above complex urbanised site. An accurate method is developed to implement numerical simulations of the urban atmosphere based on three complementary tools, optimized on Marseille agglomeration example: the atmospheric Large Eddy Simulation model SUBMESO and the soil model for sub-meso scales, urban, SM2-U, and t...

  13. Hydric characterisation of rammed earth samples for different lime concentrations

    Soudani, Lucile; Fabbri, Antonin; Woloszyn, Monika; Grillet, Anne-Cécile; Morel, Jean-Claude

    2018-04-01

    The rehabilitation of ancient rammed earth houses, as well as the use of earthen materials in modern constructions, are a growing matter of concern, especially in area such as Rhône-Alpes, France, where 40% of old constructions are in rammed earth. A current pathology observed for this type of construction is related to the rising damps, for which the water from the ground is absorbed by the wall. This situation leads to a very saturated state. As it has been proven that the compressive strength is altered by the presence of water in the pores, a better understanding on high relative humidity range is necessary to be able to predict the mechanical behavior of buildings and thus ensure a better risk assessment. The present study describes experimental results of the water uptake experiments and moisture storage at high relative humidities.

  14. RAtional Mapping (RAM) of in-core data

    Bonalumi, R.A.; Kherani, N.P.

    1983-01-01

    The paper describes and demonstrates a unique processing of in-core flux detector data, such that the detailed in-core power distribution can be derived with great accuracy by combining a specially 'smoothed-out' set of in-core data with neutron diffusion theory. RAM is designed in such a way that erratic detector signals are recognized very efficiently and can be eliminated from the experimental data set: this is achieved by modal expansion of the difference between theoretical fluxes and experimental fluxes at the detector sites. Sensitivity studies have shown that RAM is quite stable, does not absorb the 'wild' detector errors in the mapping procedure and results in mapped fluxes with errors about three times smaller than would be obtained by direct interpolation of detector readings

  15. Consideraciones sobre Infortunios de Alonso Ramírez

    Leonor Taiano

    2010-12-01

    Full Text Available This article attempts to provide new perspectives for approaching the study of Infortunios de Alonso Ramírez. Several researches about the text have given to Sigüenza y Góngora a character of strangeness to it, which would reduce him to the role of mere amanuensis, indicating that the discursive elaboration belongs to Ramirez. In view of that, I have performed a textual analysis, supported on the book's title and the final passage of the account, that I consider important elements that can offer a new perception on this issue. I base my research, additionally, on the study of its context of publication under the patronage of the New Spain viceroy, as well as the similarities of Infortunios de Alonso Ramírez with other contemporary texts.

  16. PLC based control system for RAM assembly test facility

    Kulkarni, S.S.; Kumar, Vinaya; Chandra, Umesh

    1994-01-01

    The flexibility, expandability, ease of programming and diagnostic features makes the programmable logic controller (PLC) suitable for a variety of control applications in engineering system test facilities. A PLC based control system for RAM assembly test facility (RATF) and for testing the related hydraulic components is being developed and installed at BARC. This paper describes the approach taken for meeting the control requirements and illustrates the PLC software that has been developed. (author). 1 fig

  17. A 1K shadow RAM for circumvention applications

    Murray, J.R.

    1991-01-01

    This paper reports that circumvention applications require a memory that retains data through radiation (total dose and transient) and loss of power. Various memory technologies have been reviewed and none, as yet, can meet, these requirements. However, if complementary metal oxide silicon (CMOS) and silicon nitride oxide silicon (SNOS) memories are combined in a shadow RAM (random access memory) configuration, the requirements can be fulfilled

  18. Automatic track counting with an optic RAM-based instrument

    Staderini, E.M.; Castellano, Alfredo

    1986-01-01

    A new image sensor, the optic RAM, is now used in a microprocessor controlled instrument to read and digitize images from CR39 solid state nuclear track detectors. The system performs image analysis, filtering, tracks counting and evaluation in a fully automatic way, not requiring an optic microscope, nor photographic or television devices. The proposed system is a very compact and low power device. (author)

  19. The effect of cushion-ram pulsation on hot stamping

    Landgrebe, Dirk; Rautenstrauch, Anja; Kunke, Andreas; Polster, Stefan; Kriechenbauer, Sebastian; Mauermann, Reinhard

    2016-10-01

    Hot stamping is an important technology for manufacturing high-strength components. This technology offers the possibility to achieve significant weight reductions. In this study, cushion-ram pulsation (CRP), a new technology for hot stamping on servo-screw presses, was investigated and applied for hot stamping. Compared to a conventional process, the tests yielded a significantly higher drawing depth. In this paper, the CRP technology and the first test results with hot stamping were described in comparison to the conventional process.

  20. Ram-pressure feeding of supermassive black holes.

    Poggianti, Bianca M; Jaffé, Yara L; Moretti, Alessia; Gullieuszik, Marco; Radovich, Mario; Tonnesen, Stephanie; Fritz, Jacopo; Bettoni, Daniela; Vulcani, Benedetta; Fasano, Giovanni; Bellhouse, Callum; Hau, George; Omizzolo, Alessandro

    2017-08-16

    When a supermassive black hole at the centre of a galaxy accretes matter, it gives rise to a highly energetic phenomenon: an active galactic nucleus. Numerous physical processes have been proposed to account for the funnelling of gas towards the galactic centre to feed the black hole. There are also several physical processes that can remove gas from a galaxy, one of which is ram-pressure stripping by the hot gas that fills the space between galaxies in galaxy clusters. Here we report that six out of a sample of seven 'jellyfish' galaxies-galaxies with long 'tentacles' of material that extend for dozens of kiloparsecs beyond the galactic disks-host an active nucleus, and two of them also have galactic-scale ionization cones. The high incidence of nuclear activity among heavily stripped jellyfish galaxies may be due to ram pressure causing gas to flow towards the centre and triggering the activity, or to an enhancement of the stripping caused by energy injection from the active nucleus, or both. Our analysis of the galactic position and velocity relative to the cluster strongly supports the first hypothesis, and puts forward ram pressure as another possible mechanism for feeding the central supermassive black hole with gas.

  1. The RAM +L analysis methodology: the refinery plants case study; Analise RAM +L: um estudo integrado de varias unidades de producao de uma refinaria

    Calixto, Eduardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES); Bretas, Rogerio [PETROBRAS S.A., Betim, MG (Brazil). Refinaria Gabriel Passos (REGAP)

    2008-07-01

    The RAM (Reliability, Availability and Maintainability) main objective is assess the system and equipment performance in order to identify the critical issues to implement system's improvements. The first step is define equipment failure modes and it's PDF as well as repair time for each failure mode. The second step is modeling system regarding diagram block logic dependency among equipment and its failures which cause system production losses. The third step is simulating model in defined period of time in order to identify critical equipment to propose system improvement. Despite being having been used constantly to assess system performances, those methodology do not consider the logistic complex assumptions in so many cases to huge systems and it RDB logic do not represent the real effect in production losses. Even if that good enough to perform system analysis it's not quite enough to complex system with logistic resources regarding system's products efficiency. By the other way round, in logistic complex system analysis methodologies, equipment failures details are not regarded in so many times, showing that there's a necessary improvement in those analysis. Therefore, the RAM + L analysis is a methodology which regards all equipment failures issues as well as logistic assumptions being a more realistic analysis. The refinery case study Will be propose to demonstrate a new vision of two recognized methodologies regarding a complex system with over than 200 equipment comprising two tanks, two pumps and five Unit Plants as Vacuum Distillation, Atmospheric Distillation, Hydrogen Generation, Diesel Hydrotreating Unit and DEA. (author)

  2. Impact of two chemistry mechanisms fully coupled with mesoscale model on the atmospheric pollutants distribution

    Arteta, J.; Cautenet, S.; Taghavi, M.; Audiffren, N.

    time on SGI 3800 with 30 processors). Simplified mechanisms are really important to study cases for which an online coupling is necessary between meso-scale and chemistry models (clouds or aerosols plumes impacts, highly variable meteorology).

  3. SeaRAM: A US DOE study of maritime risk assessment data and methods of analysis. Annex 7

    Ammerman, D J; Koski, J A; Sprung, J L [Sandia National Laboratories, Albuquerque, NM (United States)

    2001-07-01

    This annex describes ship collision and fire frequencies, a model of ship penetration depths during ship collisions, finite element calculations that examine the crush forces applied to a RAM cask during ship collisions, shipboard fire tests, modeling of these tests using a computational fluid dynamics code, a simple bulkhead fire spread model that is based on the fire test modeling, a probabilistic ship multi-hold fire spread model, modeling of the release of spent fuel radionuclides to the environment from a Type-B spent fuel transportation cask, and illustrative estimates of the consequences that such a radioactive release might cause. (author)

  4. SeaRAM: A US DOE study of maritime risk assessment data and methods of analysis. Annex 7

    Ammerman, D.J.; Koski, J.A.; Sprung, J.L.

    2001-01-01

    This annex describes ship collision and fire frequencies, a model of ship penetration depths during ship collisions, finite element calculations that examine the crush forces applied to a RAM cask during ship collisions, shipboard fire tests, modeling of these tests using a computational fluid dynamics code, a simple bulkhead fire spread model that is based on the fire test modeling, a probabilistic ship multi-hold fire spread model, modeling of the release of spent fuel radionuclides to the environment from a Type-B spent fuel transportation cask, and illustrative estimates of the consequences that such a radioactive release might cause. (author)

  5. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis

    DYKES, A.A.

    2000-01-01

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O and M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis

  6. Alpha-particle-induced soft errors in high speed bipolar RAM

    Mitsusada, Kazumichi; Kato, Yukio; Yamaguchi, Kunihiko; Inadachi, Masaaki

    1980-01-01

    As bipolar RAM (Random Access Memory) has been improved to a fast acting and highly integrated device, the problems negligible in the past have become the ones that can not be ignored. The problem of a-particles emitted from the radioactive substances in semiconductor package materials should be specifically noticed, which cause soft errors. The authors have produced experimentally the special 1 kbit bipolar RAM to investigate its soft errors. The package used was the standard 16 pin dual in-line type, with which the practical system mounting test and a-particle irradiation test have been performed. The results showed the occurrence of soft errors at the average rate of about 1 bit/700 device hour. It is concluded that the cause was due to the a-particles emitted from the package materials, and at the same time, it was found that the rate of soft error occurrence was able to be greatly reduced by shielding a-particles. The error rate significantly increased with the decrease of the stand-by current of memory cells and with the accumulated charge determined by time constant. The mechanism of soft error was also investigated, for which an approximate model to estimate the error rate by means of the effective noise charge due to a-particles and of the amount of reversible charges of memory cells is shown to compare it with the experimental results. (Wakatsuki, Y.)

  7. Resistive RAM: Simulation and Modeling for Reliable Design

    García Redondo, Fernando

    2017-01-01

    Las tecnologías emergentes de resistencia variable o resistencia-commutativa, Resistive-Switching (RS) technologies, están consideradas como una de las alternativas más prometedoras para el futuro de aplicaciones electrónicas de almacenamiento y sistemas de computación. Características tales como su no-volatilidad, alta densidad de integración, bajo consumo, así como su compatibilidad con circuitos CMOS tradicionales, despierta el interés de fabricantes de dispositivos, diseñadores de circuit...

  8. Effects of breed and ram exposure on Spring estrous behavior and Summer fertility in domestic ewes

    Nugent, Russell A., III

    1987-01-01

    The present studies were conducted to check the effects of acute ram introduction into a flock of anestrus ewes in Virginia. Ewes were bled via jugular venipuncture twice weekly and serum samples were radioimmunoassayed for progesterone (P4) content as an indicator of estrous activity. All rams were fitted with crayon equipped marking harnesses for use as an indicator of mating behavior in ewes. The first study tested the effects of introduction of vasectomized rams in...

  9. Effect of heterologous seminal plasma and semen extenders on motility of frozen-thawed ram spermatozoa

    G.A. Mataveia

    2010-05-01

    Full Text Available Ram seminal plasma increases the fertility of frozen-thawed ram spermatozoa deposited into the cervix. The aim of the current study was to compare the effect of ram seminal plasma to that of bull seminal plasma, dog prostatic fluid, protein-free TALP, TrilEq (Triladyl with 0.5 mℓ of Equex STM paste added to each 100 mℓ and heat-treated skim milk on longevity and percentages of progressively motile and aberrantly motile frozen-thawed ram spermatozoa. Three ejaculates from each of 6 rams were extended in TrilEq, pooled and frozen in straws as a single batch per ram. One hundred and eight straws (3 straws from each ram for each fluid were thawed in random order. Once thawed, a straw was emptied into a tube with 0.85mℓ of the appropriate fluid at 37 °C and kept at that temperature for 6 h. Motility was assessed at x200 magnification immediately (time zero and 2, 4 and 6 h after thawing. Progressive motility decreased from each time to the next (P < 0.05 and was 39.0% (0 h, 26.0% (2 h, 19.6% (4 h and 12.6% (6 h; SEM 1.24, n=108 for each group. Ram seminal plasma resulted in higher progressive motility than bull seminal plasma, lower than milk, and similar to the other fluids. Ram seminal plasma resulted in lower aberrant motility than protein-free TALP and similar aberrant motility to other fluids. The effect of ram seminal plasma and dog prostatic fluid was very similar. The effect of ram seminal plasma on the fertility of frozen-thawed ram spermatozoa deposited into the cervix is not due an exceptionally beneficial effect on the motility of spermatozoa.

  10. Characterization of Malaysian Trichoderma isolates using random amplified microsatellites (RAMS).

    Siddiquee, Shafiquzzaman; Tan, Soon Guan; Yusuf, Umi Kalsom; Fatihah, Nur Hasan Nudin; Hasan, Md Mainul

    2012-01-01

    Trichoderma species are commercially applied as biocontrol agents against numerous plant pathogenic fungi due to their production of antifungal metabolites, competition for nutrients and space, and mycoparasitism. However, currently the identification of Trichoderma species from throughout the world based on micro-morphological descriptions is tedious and prone to error. The correct identification of Trichoderma species is important as several traits are species-specific. The Random Amplified Microsatellites (RAMS) analysis done using five primers in this study showed different degrees of the genetic similarity among 42 isolates of this genus. The genetic similarity values were found to be in the range of 12.50-85.11% based on a total of 76 bands scored in the Trichoderma isolates. Of these 76 bands, 96.05% were polymorphic, 3.95% were monomorphic and 16% were exclusive bands. Two bands (250 bp and 200 bp) produced by primer LR-5 and one band (250 bp) by primer P1A were present in all the Trichoderma isolates collected from healthy and infected oil palm plantation soils. Cluster analysis based on UPGMA of the RAMS marker data showed that T. harzianum, T. virens and T. longibrachiatum isolates were grouped into different clades and lineages. In this study we found that although T. aureoviride isolates were morphologically different when compared to T. harzianum isolates, the UPGMA cluster analysis showed that the majority isolates of T. aureoviride (seven from nine) were closely related to the isolates of T. harzianum.

  11. Differential gene expression by RamA in ciprofloxacin-resistant Salmonella Typhimurium.

    Jie Zheng

    Full Text Available Overexpression of ramA has been implicated in resistance to multiple drugs in several enterobacterial pathogens. In the present study, Salmonella Typhimurium strain LTL with constitutive expression of ramA was compared to its ramA-deletion mutant by employing both DNA microarrays and phenotype microarrays (PM. The mutant strain with the disruption of ramA showed differential expression of at least 33 genes involved in 11 functional groups. The study confirmed at the transcriptional level that the constitutive expression of ramA was directly associated with increased expression of multidrug efflux pump AcrAB-TolC and decreased expression of porin protein OmpF, thereby conferring multiple drug resistance phenotype. Compared to the parent strain constitutively expressing ramA, the ramA mutant had increased susceptibility to over 70 antimicrobials and toxic compounds. The PM analysis also uncovered that the ramA mutant was better in utilization of 10 carbon sources and 5 phosphorus sources. This study suggested that the constitutive expression of ramA locus regulate not only multidrug efflux pump and accessory genes but also genes involved in carbon metabolic pathways.

  12. Design of a 16 kbit superconducting latching/SFQ hybrid RAM

    Nagasawa, Shuichi; Hasegawa, Haruhiro; Hashimoto, Tatsunori; Suzuki, Hideo; Miyahara, Kazunori; Enomoto, Youichi

    1999-01-01

    We have designed a 16 kbit superconducting latching/SFQ hybrid (SLASH) RAM, which enables high-frequency clock operation up to 10 GHz. The 16 kbit SLASH RAM consists of four 4x4 matrix arrays of 256 bit RAM blocks, block decoders, latching block drivers, latching block senses, impedance matched lines and the powering circuits. The 256 bit RAM block is composed of a 16x16 matrix array of vortex transitional memory cells, latching drivers, SFQ NOR decoders and latching sense circuits. We have also designed and implemented an SFQ NOR decoder that is composed of magnetically coupled multi-input OR gates and RSFQ inverters. (author)

  13. DETERMINATION OF PREDICTION EQUATIONS TO ESTIMATE BODY CONDITION SCORE FROM BODY SIZE AND TESTICULAR TRAITS OF YANKASA RAMS

    A. Yakubu

    2014-10-01

    Full Text Available The study was aimed to develop prediction models using stepwise multiple linear regressionanalysis for estimating the body condition score (BCS from the body weight (BW, testicular length(TL, testicular diameter (TD and scrotal circumference (SC of indigenous Yankasa rams. Data wereobtained from 120 randomly selected rams with approximately two and half years of age, from differentextensively managed herds in Nasarawa State, Nigeria. Although pairwise phenotypic correlationsindicated strong association (P<0.01 among the measured variables, there was collinearity problembetween BW and SC as revealed by the variance inflation factors (VIF and tolerance valves (T. TheVIT was higher than 10 (VIF = 19.45 and 16.65 for BW and SC, respectively. The Twas smaller than0.1 (T = 0.05 and 0.06 in BW and SC, respectively. BW was retained among the collinear variables, andwas singly accounted for 83.7% of the variation in BCS. However, a slight improvement was obtainedfrom the prediction of BCS from BW and TL [coefficient of determination (R2, adjusted R2 and rootmean squares error (RMSE were 85.3%, 85.1% and 0.305, respectively]. The prediction of the BCS ofYankasa rams from BW and testicular measurements could therefore be a potential tool for sustainableproduction and improvement of small ruminants in Nigeria.

  14. Reversible harmless interruption of testicular blood supply in the ram

    van Vliet, J.; De Ruiter-Bootsma, A.L.; Oei, Y.H.; Hoekstra, A.; De Rooij, D.G.; Wensing, C.J.

    1987-01-01

    An effective method of interrupting testicular blood flow temporarily and repeatedly in the ram has been developed. Blockade of flow has been achieved mechanically by an inflatable occluder placed around the testicular artery at the level of the spermatic cord. The effect of the blockade on total testicular blood supply was investigated using Doppler flowmetry and a percutaneous Xenon-133 injection method. With both approaches, the blood flow changes after inflation or deflation of the occluders could be estimated satisfactorily. A substantial decrease of testicular blood flow was achieved in eight of the 10 testes with inflated occluders. However, there were indications that in the remaining two testes blockade of the arterial flow was not complete. After deflation of the occluders, blood flow was restored rapidly and completely in all testes. Macro- and microscopic examinations revealed no long-term damage to the testis after blood flow interruptions lasting 30 or 60 minutes

  15. High-speed nonvolatile CMOS/MNOS RAM

    Derbenwick, G.F.; Dodson, W.D.; Sokel, R.J.

    1979-01-01

    A bulk silicon technology for a high-speed static CMOS/MNOS RAM has been developed. Radiation-hardened, high voltage CMOS circuits have been fabricated for the memory array driving circuits and the enhancement-mode p-channel MNOS memory transistors have been fabricated using a native tunneling oxide with a 45 nm CVD Si 3 N 4 insulator deposited at 750 0 C. Read cycle times less than 350 ns and write cycle times of 1 μs are projected for the final 1Kx1 design. The CMOS circuits provide adequate speed for the write and read cycles and minimize the standby power dissipation. Retention times well in excess of 30 min are projected

  16. First Exploratory Study on the Ageing of Rammed Earth Material

    Bui, Quoc-Bao; Morel, Jean-Claude

    2014-01-01

    Rammed earth (RE) is attracting renewed interest throughout the world thanks to its “green” characteristics in the context of sustainable building. In this study, the ageing effects on RE material are studied on the walls which have been constructed and exposed for 22 years to natural weathering. First, mechanical characteristics of the “old” walls were determined by two approaches: in-situ dynamic measurements on the walls; laboratory tests on specimens which had been cut from the walls. Then, the walls’ soil was recycled and reused for manufacturing of new specimens which represented the initial state. Comparison between the compressive strength, the Young modulus of the walls after 22 years on site and that of the initial state enables to assess the ageing of the studied walls. PMID:28787920

  17. NGC 4438: Ram pressure sweeping of a tidally disrupted galaxy

    Hibbard, J.E.; Vangorkom, J.H.

    1990-01-01

    NGC 4438 is the highly HI deficient peculiar spiral in the center of the Virgo cluster. Observations are given of the neutral hydrogen emission obtained with the Very Large Array (VLA) in the D-array configuration. These observations map out the total HI as determined from single dish measurements, and show the hydrogen to be confined to a region about one third the size of the optical disk and displaced to the side of the galaxy opposite M87. The hydrogen content of the galaxy is over an order of magnitude less than that expected for a galaxy of its type. The data suggest that the HI deficiency is a result of ram pressure stripping of the gas in the outer regions of the galaxy by the hot intracluster medium after being tidally perturbed

  18. Design of a ram accelerator mass launch system

    Aarnio, Michael; Armerding, Calvin; Berschauer, Andrew; Christofferson, Erik; Clement, Paul; Gohd, Robin; Neely, Bret; Reed, David; Rodriguez, Carlos; Swanstrom, Fredrick

    1988-01-01

    The ram accelerator mass launch system has been proposed to greatly reduce the costs of placing acceleration-insensitive payloads into low earth orbit. The ram accelerator is a chemically propelled, impulsive mass launch system capable of efficiently accelerating relatively large masses from velocities of 0.7 km/sec to 10 km/sec. The principles of propulsion are based on those of a conventional supersonic air-breathing ramjet; however the device operates in a somewhat different manner. The payload carrying vehicle resembles the center-body of the ramjet and accelerates through a stationary tube which acts as the outer cowling. The tube is filled with premixed gaseous fuel and oxidizer mixtures that burn in the vicinity of the vehicle's base, producing a thrust which accelerates the vehicle through the tube. This study examines the requirement for placing a 2000 kg vehicle into a 500 km circular orbit with a minimum amount of on-board rocket propellant for orbital maneuvers. The goal is to achieve a 50 pct payload mass fraction. The proposed design requirements have several self-imposed constraints that define the vehicle and tube configurations. Structural considerations on the vehicle and tube wall dictate an upper acceleration limit of 1000 g's and a tube inside diameter of 1.0 m. In-tube propulsive requirements and vehicle structural constraints result in a vehicle diameter of 0.76 m, a total length of 7.5 m and a nose-cone half angle of 7 degrees. An ablating nose-cone constructed from carbon-carbon composite serves as the thermal protection mechanism for atmospheric transit.

  19. NGC 3312: A victim of ram pressure sweeping

    Mcmahon, P.M.; Richter, O.G.; Vangorkom, J.H.; Ferguson, H.C.

    1990-01-01

    Researchers are undertaking a volume limited survey of the Hydra I cluster in neutral hydrogen using the National Radio Astronomy Observatory's Very Large Array (VLA). The main purpose is to study the effects of a dense environment on the gaseous component of the galaxies. Observational evidence has been accumulating recently that ram pressure sweeping does occur in the centers of clusters, but it is possible that tidal interactions play a role as well. Results of high resolution HI imaging of NGC 3312, the large peculiar spiral near the cluster center are presented. Hydra I (= A1060) is the nearest rich cluster beyond Virgo and, as such, presents a unique opportunity to do a complete survey of a cluster. It is similar to the Virgo cluster in many of its general physical characteristics, such as size, x ray luminosity, velocity dispersion, and galaxy content (high spiral fraction). However, Hydra I appears to be more regular and relaxed. This is evident in the x ray distribution in its central region, which is radially symmetric and centered on the dominant galaxy, NGC 3311, a cD-like elliptical. The observed x ray luminosity implies a central gas density of 4.5 x 10 to the 3rd power cm(-3). Gallagher (1978) argued from optical images of NGC 3312 that this galaxy might be an ideal candidate to directly study effects of the ram pressure process; it might currently be undergoing stripping of its interstellar medium. The researchers' data are consistent with this suggestion, but other origins of the peculiar appearance cannot yet be ruled out

  20. Effect of semen extender and storage temperature on ram sperm motility over time

    Storage of ram semen for long period of time depends on a number of factors, including type of extender and storage temperature. A study compared the effect of semen extender and storage temperature on motility of ram semen stored for 72 h. Semen collected via electroejaculator from 5 mature Katahd...

  1. Uudised : Hortus Musicus Moskvas. TPÜ naiskoor koorikonkursil. RAM samal laval Mark Knopfleriga. "Tuuleveskid. Kerkokell" / Joosep Sang

    Sang, Joosep

    2000-01-01

    Hortus Musicus esines 23. ja 24. nov. Moskvas. TPÜnaiskoor võitis II preemia XVII rahvusvahelisel F.Schuberti nim. koorikonkursil Austrias. RAM esineb 8. dets. Helsingis Hartwall Areenas heategevuskontserdil. RAM esineb 6. dets. Estonia kontserdisaalis kavaga "Tuuleveskid. Kerkokell"

  2. RANGE RAM: a long-term planning method for managing grazing lands

    Henricus C. Jansen

    1976-01-01

    Range RAM (Resource Allocation Method) is a computerized planning method designed to assist range managers in developing and selecting alternatives in spatial and temporal allocation of resources. The technique is applicable at the frest or district management levels, or their equivalents. Range RAM can help formulate plans that maximize the production of range outputs...

  3. The Effect of Central American Smoke Aerosols on the Air Quality and Climate over the Southeastern United States: First Results from RAMS-AROMA

    Wang, J.; Christopher, S. A.; Nair, U. S.; Reid, J.; Prins, E. M.; Szykman, J.

    2004-12-01

    Observation shows that smoke aerosols from biomass burning activities in Central America can be transported to the Southeastern United States (SEUS). In this study, the Regional Atmospheric Modeling System - Assimilation and Radiation Online Modeling of Aerosols (RAMS-AROMA) is used to investigate the effect of transported smoke aerosols on climate and air quality over the SEUS. AROMA is an aerosol transport model with capabilities of online integration of aerosol radiation effects and online assimilation of satellite-derived aerosol and emission products. It is assembled within the RAMS, so two-way interactions between aerosol fields and other meteorology fields are achieved simultaneously during each model time step. RAMS-AROMA is a unique tool that can be used to examine the aerosol radiative impacts on the surface energy budget and atmospheric heating rate and to investigate how atmospheric thermal and dynamical processes respond to such impacts and consequently affect the aerosol distribution (so called feedbacks). First results regarding air quality effects and radiative forcing of transported smoke aerosols will be presented from RAMS-AROMA based on assimilation of smoke emission products from the Fire Locating and Modeling of Burning Emissions (FLAMBE) project and aerosol optical thickness data derived from the MODIS instrument on the Terra and Aqua satellites. Comparisons with PM2.5 data collected from the EPA observation network and the aerosol optical thickness data from the DOE Atmosphere Radiation Measurements in the Southern Great Plains (ARM SGP) showed that RAMS-AROMA can predict the timing and spatial distribution of smoke events very well, with an accuracy useful for air quality forecasts. The smoke radiative effects on the surface temperature and atmospheric heating rate as well as their feedbacks will also be discussed.

  4. Numerical models for fluid-grains interactions: opportunities and limitations

    Esteghamatian, Amir; Rahmani, Mona; Wachs, Anthony

    2017-06-01

    In the framework of a multi-scale approach, we develop numerical models for suspension flows. At the micro scale level, we perform particle-resolved numerical simulations using a Distributed Lagrange Multiplier/Fictitious Domain approach. At the meso scale level, we use a two-way Euler/Lagrange approach with a Gaussian filtering kernel to model fluid-solid momentum transfer. At both the micro and meso scale levels, particles are individually tracked in a Lagrangian way and all inter-particle collisions are computed by a Discrete Element/Soft-sphere method. The previous numerical models have been extended to handle particles of arbitrary shape (non-spherical, angular and even non-convex) as well as to treat heat and mass transfer. All simulation tools are fully-MPI parallel with standard domain decomposition and run on supercomputers with a satisfactory scalability on up to a few thousands of cores. The main asset of multi scale analysis is the ability to extend our comprehension of the dynamics of suspension flows based on the knowledge acquired from the high-fidelity micro scale simulations and to use that knowledge to improve the meso scale model. We illustrate how we can benefit from this strategy for a fluidized bed, where we introduce a stochastic drag force model derived from micro-scale simulations to recover the proper level of particle fluctuations. Conversely, we discuss the limitations of such modelling tools such as their limited ability to capture lubrication forces and boundary layers in highly inertial flows. We suggest ways to overcome these limitations in order to enhance further the capabilities of the numerical models.

  5. Comparison of sexual performance and testicular characteristics of melatonin treated Kivircik and Charollais rams during the non-breeding season

    M. Cevik

    Full Text Available ABSTRACT This study was conducted to investigate the effects of melatonin implantation on basic testicular characteristics and reproductive performance of Kivircik and Charollais rams and ewes during the non-breeding season. In this study, 8 Kivircik and 6 Charollais rams were used. Rams were implanted with 54 mg melatonin according to the manufacturer's instructions. At melatonin implantation and at ram introduction the reproductive performance and testicular characteristics were evaluated. Throughout the experimental period, rams were permanently kept outdoors under conditions of natural day length and at ambient temperature. The effects of exogenous melatonin treatments on the reproductive performances of rams and ewes, estrus response, pregnancy rate, litter size and twinning rate of ewes were evaluated in all groups. Libido values were significantly higher in Charollais rams compared to Kivircik rams (P<0.001. Testicular volume (TV was increased in both ram breeds. Scrotal length (SL was also increased in both Kivircik and Charollais rams (P<0.01. In conclusion, we showed that the treatment of rams with slow release melatonin implants increased scrotal diameters and testicular volumes in both Kivircik and Charollais rams. Furthermore, melatonin implantation improved the reproductive performances of ewes naturally mated with these melatonin implanted rams during non-breeding season.

  6. Preference of redear sunfish on zebra mussels and rams-horn snails

    French, John R. P.; Morgan, Michael N.

    1995-01-01

    We tested prey preferences of adult (200- to 222-mm long) redear sunfish (Lepomis microlophus) on two size classes of zebra mussels (Dreissena polymorpha) and two-ridge rams-horns (Helisoma anceps) in experimental aquaria. We also tested physical limitations on consuming these mollusks and determined prey bioenergetic profitability. Redear sunfish strongly preferred rams-horns over zebra mussels, but they displayed no size preference for either prey. Ingestion was not physically limited since both prey species up to 15-mm long fit within the pharyngeal gapes of redear sunfish. Rams-horns were more bioenergetically profitable than zebra mussels and ingestion of rams-horn shell fragments was about three times less than zebra mussels. Rams-horns were somewhat more resistant to shell-crushing, but all size ranges of both prey species tested were crushable by redear sunfish. These studies suggested that the redear sunfish should not be considered a panacea for biological control of zebra mussels.

  7. Jellyfish: Observational Properties of Extreme Ram-Pressure Stripping Events in Massive Galaxy Clusters

    Conor, McPartland; Ebeling, Harald; Roediger, Elke

    2015-08-01

    We investigate the physical origin and observational signatures of extreme ram-pressure stripping (RPS) in 63 massive galaxy clusters at z=0.3-0.7, based on data in the F606W passband obtained with the Advanced Camera for Surveys aboard the Hubble Space Telescope. Using a training set of a dozen ``jellyfish" galaxies identified earlier in the same imaging data, we define quantitative morphological criteria to select candidate galaxies which are similar to known cases of RPS. Considering a sample of 16 ``jellyfish" galaxies (10 of which we present for the first time), we visually derive estimates of the projected direction of motion based on dynamical features such as apparent compression shocks and debris trails. Our findings suggest that the observed events occur primarily at large distances from the cluster core and involve infall trajectories featuring high impact parameters. Simple models of cluster growth show that such trajectories are consistent with two scenarios: 1) galaxy infall along filaments; and 2) infall at high velocities (≥1000 km/s) characteristic of cluster mergers. The observed distribution of events is best described by timescales of ˜few Myr in agreement with recent numerical simulations of RPS. The broader areal coverage of the Hubble Frontier Fields should provide an even larger sample of RPS events to determine the relative contributions of infall and cluster mergers. Prompted by the discovery of several jellyfish galaxies whose brightness in the F606W passband rivals or exceeds that of the respective brightest cluster galaxy, we attempt to constrain the luminosity function of galaxies undergoing RPS. The observed significant excess at the bright end compared to the luminosity functions of blue cluster members strongly suggests enhanced star formation, thus challenging theoretical and numerical studies according to which RPS merely displaces existing star-forming regions. In-depth studies of individual objects will help test our

  8. Effect of Non-linear Velocity Loss Changes in Pumping Stage of Hydraulic Ram Pumps on Pumping Discharge Rate

    Reza Fatahialkouhi

    2018-03-01

    Full Text Available The ram pump is a device which pumps a portion of input discharge to the pumping system in a significant height by using renewable energy of water hammer. The complexities of flow hydraulic on one hand and on the other hand the use of simplifying assumptions in ram pumps have caused errors in submitted analytical models for analyzing running cycle of these pumps. In this study it has been tried to modify the governing analytical model on hydraulic performance of these pumps in pumping stage. In this study by creating a logical division, the cycle of the ram pump was divided into three stages of acceleration, pumping and recoil and the governing equations on each stage of cycling are presented by using method of characteristics. Since the closing of impulse valve is nonlinear, velocity loss in pumping stage is considered nonlinearly. Also the governing equations in pumping stage were modified by considering disc elasticity of impulse valve and changing volume of the pump body when the water hammer phenomenon is occurred. In order to evaluate results and determine empirical factors of the proposed analytical model, a physical model of the ram pump is made with internal diameter of 51 mm. Results of this study are divided into several parts. In the first part, loss coefficients of the impulse valve were measured experimentally and empirical equations of drag coefficient and friction coefficient of the impulse valve were submitted by using nonlinear regression. In the second part, results were evaluated by using experimental data taken from this study. Evaluation of statistical error functions showed that the proposed model has good accuracy for predicting experimental observations. In the third part, in order to validate the results in pumping stage, the analytical models of Lansford and Dugan (1941 and Tacke (1988 were used and the error functions resulted from prediction of experimental observations were investigated through analytical models of

  9. Continuous exposure to sexually active rams extends estrous activity in ewes in spring.

    Abecia, J A; Chemineau, P; Flores, J A; Keller, M; Duarte, G; Forcada, F; Delgadillo, J A

    2015-12-01

    Sexual activity in sheep is under photoperiodic control, which is the main environmental factor responsible for the seasonality of reproduction. However, other natural environmental factors such as presence of conspecifics can slightly influence the timing of onset and offset of the breeding season. In goats, we have found that the continuous presence of bucks that were rendered sexually active out of season by previous exposure to long days, prevented goats from displaying seasonal anestrus, which suggests that the relative contribution of photoperiod in controlling seasonal anestrus should be reevaluated in small ruminant species. The aim of this study was to assess whether the presence of sexually active rams that had been stimulated by artificial photoperiod and melatonin implants, reduces seasonal anestrus in sheep, by prolonging ovulatory activity in spring. Ewes were assigned to one of two groups (n = 16 and 15), which were housed in two separate barns, and kept in contact, either with the treated or the control rams between March and July. Vasectomized rams were either exposed to 2 months of long days followed by the insertion of three subcutaneous melatonin implants (treated rams, n = 8), or exposed to natural light conditions (control rams, n = 2). Estrus was monitored daily, and weekly plasma progesterone analyses indicated ovulatory activity. Ewes that were exposed to treated rams exhibited a higher proportion of monthly estrus than ewes exposed to the control rams (P ewes (one ewe was not considered because of the presence of persistent CL) exposed to stimulated rams exhibited estrous behavior in a cyclic manner. In contrast, all ewes exposed to control rams stopped estrous activity for a period of time during the study, such that this group exhibited a significantly longer anestrous season (mean ± standard error of the mean 89 ± 9 days) than did the ewes housed with treated rams (26 ± 10 days; P ewes housed with treated rams, 13 of

  10. Impact of Intraseasonal Oscillations on the Tropical Cyclone Activity Over the Gulf of Mexico and Western Caribbean Sea in GFDL HiRAM

    Gao, Kun; Chen, Jan-Huey; Harris, Lucas M.; Lin, Shian-Jiann; Xiang, Baoqiang; Zhao, Ming

    2017-12-01

    The tropical cyclones (TCs) that form over the warm waters in the Gulf of Mexico region pose a major threat to the surrounding coastal communities. Skillful subseasonal prediction of TC activity is important for early preparedness and reducing the TC damage in this region. In this study, we evaluate the performance of a 25 km resolution Geophysical Fluid Dynamics Laboratory (GFDL) High Resolution Atmospheric Model (HiRAM) in simulating the modulation of the TC activity in the Gulf of Mexico and western Caribbean Sea by the intraseasonal oscillation (ISO) based on multiyear retrospective seasonal predictions. We demonstrate that the HiRAM faithfully captures the observed influence of ISO on TC activity over the region of interest, including the formation of tropical storms and (major) hurricanes, as well as the landfalling storms. This is likely because of the realistic representation of the large-scale anomalies associated with boreal summer ISO over Northeast Pacific in HiRAM, especially the enhanced (reduced) moisture throughout the troposphere during the convectively enhanced (suppressed) phase of ISO. The reasonable performance of HiRAM suggests its potential for the subseasonal prediction of regional TC risk.

  11. Heart rate patterns during courtship and mating in rams and in estrous and nonestrous ewes ().

    Orihuela, A; Omaña, J C; Ungerfeld, R

    2016-02-01

    The aim of this study was to compare the heart rate (HR) patterns in rams mated with estrous or nonestrous ewes and in mated estrous and nonestrous ewes () during courtship and mating. For this purpose, HR and behavior were recorded using a radio telemetry recording system and a closed-circuit television system with video recording, respectively. Rams were joined with either an estrous ( = 10) or a nonestrous ( = 10) ewe that was restrained in a stanchion by the neck. Data were continuously recorded until each ram performed 3 ejaculations. Eight days later, the HR of the 10 estrous and 10 nonestrous ewes was recorded during mating. Although the time between entrance into the yard and the first ejaculation was similar across rams, rams that mounted estrous ewes were faster at attaining their second (3min5s ± 17 s vs. 5min28s ± 18 s) and third (7min58s ± 45 s vs. 12 min ± 1min14s) ejaculations (all ewes. In all cases, HR reached maximum values immediately after each ejaculation and the HR pattern was similar across ejaculations (first, second, and third). Although HR was similar between estrous and nonestrous ewes before mating, nonestrous ewes had higher HR ( ewes displayed shorter interejaculation periods but HR did not differ between groups of rams during any ejaculation (first, second, or third), 2) HR for both groups of rams peaked shortly after each ejaculation, and 3) HR increased more in nonestrous than in estrous ewes while mating.

  12. Aspects of Toxoplasma Infection on the Reproductive System of Experimentally Infected Rams (Ovis Aries

    Welber Daniel Zanetti Lopes

    2009-01-01

    Full Text Available Eight reproductive rams with no prior reproductive disease were distributed into three groups of infection with T. gondii: GI, 3 rams, 2.0×105 P strain oocysts; GII, 3 rams, 1.0×106 RH strain tachyzoites; GIII, 2 control rams. Clinical parameters were measured and serological evaluations (IIF were performed. Presence of the parasite in the semen was investigated by PCR and bioassay techniques. The rams presented clinical alterations (hyperthermia and apathy related to toxoplasmosis in both groups infected with Toxoplasma gondii. All the inoculated rams responded to antigenic stimulus, producing antibodies against T. gondii from postinoculation day 5 onwards. In ovine groups I and II, the greatest titers observed were 1 : 4096 and 1 : 8192, respectively. In semen samples collected from these two groups, the presence of T. gondii was detected by bioassay and PCR. This coccidian was isolated (bioassay and PCR in tissue pools (testicles, epididymis, seminal vesicle, and prostrate from two rams infected presenting oocysts and in one presenting tachyzoites.

  13. Shear Ram Verification Test Protocol (VTP) Best Practices

    Lindley, Roy A. [Argonne National Lab. (ANL), Argonne, IL (United States); Braun, Joseph C. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    A blowout preventer (BOP) is a critical component used on subsea oil and gas wells during drilling, completion, and workover operations on the U. S. outer continental shelf (OCS). The purpose of the BOP is to seal oil and gas wells, and in the case of an emergency well-control event, to prevent the uncontrolled release of hydrocarbons. One of the most important components of the BOP is the hydraulically operated blind shear ram (BSR) that shears drilling-related components, such as drill pipes, casings, tubings, and wire-related tools that may have been placed in the well. In addition to shearing these components, the BSR must form a seal to keep hydrocarbons within the well bore, even when under the highest well-fluid pressures expected. The purpose of this document is for Argonne National Laboratory (ANL) to provide an independent view, based on current regulations, and best practices for testing and confirming the operability and suitability of BSRs under realistic (or actual) well conditions.

  14. Fort St. Vrain fuel-handling system RAM analysis

    Azizi, S.M.; Berg, G.E.; Burton, J.H.; Durand, R.E.; Larson, E.M.; Pepe, D.J.; Rutherford, P.D.; Novachek, F.J.

    1989-01-01

    Public Service of Company of Colorado (PSC) is planning to decommission its Fort St. Vrain plant in 1990. This requires removal of 1,500 separate assemblies from the core. With the low historical availability of the fuel-handling system (FHS), defueling time was estimated at 36 months. With plant expenses of approximately $1.6 million per month during defueling, this would mean a schedule cost of $58 million. With their contractor, Rockwell International, PSC embarked on a reliability, availability, and maintainability (RAM) analysis to reduce projected defueling time. Key elements included (a) estimating availability of the FHS using a limited historical record, (b) assessing the defueling critical path, and (c) proposing and evaluating design/operational improvements. The most cost-effective improvements are being implemented and are expected to provide a reduction of >18 months in schedule and a net savings of $20 to 25 million. The paper describes the FHS design and operation, major problems associated with fuel-handling operations, and results and recommendations

  15. Geographic resolution issues in RAM transportation risk analysis

    Mills G, Scott; Neuhauser, Sieglinde

    2000-01-01

    Over the years that radioactive material (RAM) transportation risk estimates have been calculated using the RADTRAN code, demand for improved geographic resolution of route characteristics, especially density of population neighboring route segments, has led to code improvements that provide more specific route definition. With the advent of geographic information systems (GISs), the achievable resolution of route characteristics is theoretically very high. The authors have compiled population-density data in 1-kilometer increments for routes extending over hundreds of kilometers without impractical expenditures of time. Achievable resolution of analysis is limited, however, by the resolution of available data. U.S. Census data typically have 1-km or better resolution within densely-populated portions of metropolitan areas but census blocks are much larger in rural areas. Geographic resolution of accident-rate data, especially for heavy/combination trucks, are typically tabulated on a statewide basis. These practical realities cause one to ask what level(s) of resolution may be necessary for meaningful risk analysis of transportation actions on a state or interstate scale

  16. Asymmetric Star Formation Efficiency Due to Ram Pressure Stripping

    Paulina Troncoso Iribarren

    2016-12-01

    Full Text Available Previous works have shown that a dense cluster environment affects satellite galaxy properties and accelerates or truncates their evolutionary processes. In this work, we use the EAGLE simulation to study this effect, dissecting the galaxies in two halves: the one that is falling directly to the cluster (leading half and the one behind (trailing half. Considering all galaxies within the virial radius of the most massive groups and clusters of the simulation ( M h a l o > 10 13 . 8 [ M ⊙ ] , we find that on average the leading half presents an enhancement of the star formation rate with respect to the trailing half. We conclude that galaxies falling into the intra-cluster medium experience a boost in star-formation in their leading half due to ram pressure. Sparse observations of jellyfish galaxies have revealed visually the enhancement of the star formation in the leading half. In order to confirm this effect statistically using observations, different cases must be investigated using the simulation as a test dataset.

  17. A Minimum Leakage Quasi-Static RAM Bitcell

    Adam Teman

    2011-05-01

    Full Text Available As SRAMs continue to grow and comprise larger percentages of the area and power consumption in advanced systems, the need to minimize static currents becomes essential. This brief presents a novel 9T Quasi-Static RAM Bitcell that provides aggressive leakage reduction and high write margins. The quasi-static operation method of this cell, based on internal feedback and leakage ratios, minimizes static power while maintaining sufficient, albeit depleted, noise margins. This paper presents the concept of the novel cell, and discusses the stability of the cell under hold, read and write operations. The cell was implemented in a low-power 40 nm TSMC process, showing as much as a 12× reduction in leakage current at typical conditions, as compared to a standard 6T or 8T bitcell at the same supply voltage. The implemented cell showed full functionality under global and local process variations at nominal and low voltages, as low as 300 mV.

  18. Truck transport of RAM: Risk effects of avoiding metropolitan areas

    Mills, G.S.; Neuhauser, K.S.

    1997-11-01

    In the transport of radioactive material (RAM), e.g., spent nuclear fuel (SNF), stakeholders are generally most concerned about risks in high population density areas along transportation routes because of the perceived high consequences of potential accidents. The most significant portions of a transcontinental route and an alternative examined previously were evaluated again using population density data derived from US Census Block data. This method of characterizing population that adjoins route segments offers improved resolution of population density variations, especially in high population density areas along typical transport routes. Calculated incident free doses and accident dose risks for these routes, and the rural, suburban and urban segments are presented for comparison of their relative magnitudes. The results indicate that modification of this route to avoid major metropolitan areas through use of non-Interstate highways increases total risk yet does not eliminate a relatively small urban component of the accident dose risk. This conclusion is not altered by improved resolution of route segments adjoining high density populations

  19. Continuum-Kinetic Models and Numerical Methods for Multiphase Applications

    Nault, Isaac Michael

    This thesis presents a continuum-kinetic approach for modeling general problems in multiphase solid mechanics. In this context, a continuum model refers to any model, typically on the macro-scale, in which continuous state variables are used to capture the most important physics: conservation of mass, momentum, and energy. A kinetic model refers to any model, typically on the meso-scale, which captures the statistical motion and evolution of microscopic entitites. Multiphase phenomena usually involve non-negligible micro or meso-scopic effects at the interfaces between phases. The approach developed in the thesis attempts to combine the computational performance benefits of a continuum model with the physical accuracy of a kinetic model when applied to a multiphase problem. The approach is applied to modeling a single particle impact in Cold Spray, an engineering process that intimately involves the interaction of crystal grains with high-magnitude elastic waves. Such a situation could be classified a multiphase application due to the discrete nature of grains on the spatial scale of the problem. For this application, a hyper elasto-plastic model is solved by a finite volume method with approximate Riemann solver. The results of this model are compared for two types of plastic closure: a phenomenological macro-scale constitutive law, and a physics-based meso-scale Crystal Plasticity model.

  20. A Study of the Failure of Joints in Composite Material Fuel Cells Due to Hydraulic Ram Loading

    1976-06-01

    H co PSw Z QW <H W CO 33 PS4 o CO O CM \\ Q> 00 vO m CO CM N ra Figure VI.B.l THICKNESS MODEL 55 it acts upon on the membrane, gives the force to be...ability of the joint to carry the loads created by hydraulic ram loading. It would also make the manufacturing procedure easier, less time consuming , and...70 less expensive. Cutting holes and channels in a composite plate not only alters the behavior and load carrying capa- bility of the plate, but it is

  1. Predicted congestions never occur. On the gap between transport modeling and human behavior

    Harald FREY

    2011-01-01

    Full Text Available This paper presents an introduction to meso-scale transport modeling and issues of human behaviour in transport systems. Along with other examples of the human ability to learn in transport systems we look at the comparison of real life data and the prediction of modeling tools for the closure of Vienna’s inner ring road during the 2008 European Football Championship (EURO 2008. Some light is shed on the scientific question, whether currently used modeling tools are able to adequately reproduce the real-life behaviour of human beings in the transport system and should be used for transport policy decision making.

  2. Investigation on MCU Clustering Methodologies for Cross-Section Estimation of RAMs

    Bosser, A; Tsiligiannis, G; Javanainen, A; Kettunen, H; Puchner, H; Saigne, F; Virtanen, A; Wrobel, F; Dilillo, L

    2015-01-01

    During irradiation testing of RAMs, various failure scenarios may occur which may generate different characteristic Multiple Cell Upset (MCU) error patterns. This work proposes a method based on spatial and temporal criteria to identify them.

  3. The influence of exercising rams on the lambing performance of a ...

    obtained in body mass between the exercised and non-exercised rams. ... Several aspects of male fertility, viz. testis size, mating behaviour, libido ... no differences in the feeding status existed due to a possible difference in .... output in cattle.

  4. C-RAM: breaking mobile device memory barriers using the cloud

    Pamboris, A; Pietzuch, P

    2015-01-01

    ?Mobile applications are constrained by the available memory of mobile devices. We present C-RAM, a system that uses cloud-based memory to extend the memory of mobile devices. It splits application state and its associated computation between a mobile device and a cloud node to allow applications to consume more memory, while minimising the performance impact. C-RAM thus enables developers to realise new applications or port legacy desktop applications with a large memory footprint to mobile ...

  5. Radiation immune RAM semiconductor technology for the 80's. [Random Access Memory

    Hanna, W. A.; Panagos, P.

    1983-01-01

    This paper presents current and short term future characteristics of RAM semiconductor technologies which were obtained by literature survey and discussions with cognizant Government and industry personnel. In particular, total ionizing dose tolerance and high energy particle susceptibility of the technologies are addressed. Technologies judged compatible with spacecraft applications are ranked to determine the best current and future technology for fast access (less than 60 ns), radiation tolerant RAM.

  6. The use of silicon devices (diodes, RAMs, etc.) for alpha particle detection

    Agosteo, S.; Foglio Para, A.

    1993-01-01

    Silicon electronic devices (diodes, random access memories (RAMs), etc.) can be employed in alpha particle detection and spectroscopy with a good energy resolution. The detection mechanisms are first discussed; the performances of these devices operating in the pulse and in the current mode are then described starting from the pioneering works of the last decade. Some peculiar applications of RAMs are finally reported. (author). 7 refs, 5 figs, 1 tab

  7. the effect of freezing method on the survival of ram spermatozoa

    Sci.2l, 351. SALAIIiON, S., 1970. The survival of ram spermatozoa following pellet freezing below-79oC. Aust- .1. hiol..n'r. 13. 459. SALAMON, S. & BRANDON, M.R., l97l . Effect of compcition of thawing solution on sunrival of ram spernntozoa iroznn by the pellet method. Aust. J. biol. Sci. 24,355. SALAMON, S. & VISSER, D., ...

  8. Consignor's part and multimodality of the packages of RAM

    Grenier, M.

    1993-01-01

    One of the essential principles of Safety in transport of RAM as it was carried on, until the present days, is that the safety comes firstly from the packaging, and not from a special consideration of the mode of transport or anything else. A natural consequence was that the packaging remains the same, whatever is the used mode of transport, another that the transport mode does not take part, otherly than by its normal safety in the carriage itself in the protection against the radioactive hazard. Some recent actions, nevertheless, could be considered as putting some doubt on the implementation of this principles in the regulations and sometimes on these principles themselves. However, these latter come from the fact that the safety of the transport lays essentially in the hands of the consignor. He is indeed the only one who knows well enough the material and who is able to assess the adequation of the packaging and to warrant it to the Competent Authority when necessary. Besides, the packaging is the only direct grasp he has on the shipment, outside the special case of exclusive use. This situation is not completely incompatible with a new possible graduation of the packaging according to the transport mode, under the condition that this graduation be unidimensional which means the same in every field of testing. The consignor must, then, select the packaging corresponding to the most demanding of the possible modes. It is certainly much more difficult to adapt the mode of transport to the shipped materials themselves. All the transport has then to be in the hands of the consignor. That perhaps, can be relevant to industrial nuclear transport (eg: irradiated fuels, wastes), but not to the carriage of radioactive materials in general, which is the scope of IAEA regulations. (author)

  9. EXPERIMENTAL STUDIES AND NUMERICAL ANALYSIS FOR THE DEFORMATIONSTRENGTH CHARACTERISTICS OF RAMMED MICRO-PILES WITH A BROADENED AGGREGATE BASE

    V. S. Alekhin

    2016-01-01

    Full Text Available Objectives. Experimental and theoretical determination of dependencies of strength characteristics of bored micropiles with a pedestal formed by rammed rubble on: casing diameter, fraction, and volume of crushed stone for collapsing macroporous clays. Method. Laboratory and field experiments were carried out; numerical calculations in two-dimensional and threedimensional arrangement for the determination of strain-stress analysis of the foundation using a MIDAS GTS_NX software system, implementing the finite element method and developed for complex geotechnical problems; some recommendations for implementation are provided. Results The dependence of the load-bearing capacity of bored micropiles on a broadened base of rammed aggregate with vertical loading is determined. At the maximum broadening diameter of 3.5 of the micropiles shaft the load-bearing capacity of the subsoil is increased by between 1.8 and 6 times compared with micropiles without broadening depending on the diameter of the pile shaft. During the experimental and numerical studies of the dependencies of deformation-strength parameters of the deep foundation works consisting of a bored micropile with a broadened base, namely the pile diameter, aggregate particle size and volume, seal diameter of the subsoil soil half-space, as well as the development of the theory of formation of the end broadening geometry of rammed aggregate in the form of an ellipsoid of revolution were established. Conclusion The full-scale measurements of the broadening of bored micropiles showed that their shape is close to an ellipsoid of revolution, and the ratio of semi-axes is directly dependent on the characteristics of soil and gravel volume, which was taken into account in the construction of the finite element model in the numerical simulation experiment.The results of numerical studies of the bored micropile loading with broadened base on the MIDAS GTS show good agreement with the results of the

  10. The Magellanic Stream System. I. Ram-Pressure Tails and the Relics of the Collision Between the Magellanic Clouds

    Hammer, F.; Yang, Y. B.; Flores, H.; Puech, M.; Fouquet, S.

    2015-11-01

    We have analyzed the Magellanic Stream (MS) using the deepest and the most resolved H i survey of the Southern Hemisphere (the Galactic All-Sky Survey). The overall Stream is structured into two filaments, suggesting two ram-pressure tails lagging behind the Magellanic Clouds (MCs), and resembling two close, transonic, von Karman vortex streets. The past motions of the Clouds appear imprinted in them, implying almost parallel initial orbits, and then a radical change after their passage near the N(H i) peak of the MS. This is consistent with a recent collision between the MCs, 200-300 Myr ago, which has stripped their gas further into small clouds, spreading them out along a gigantic bow shock, perpendicular to the MS. The Stream is formed by the interplay between stellar feedback and the ram pressure exerted by hot gas in the Milky Way (MW) halo with n h = 10-4 cm-3 at 50-70 kpc, a value necessary to explain the MS multiphase high-velocity clouds. The corresponding hydrodynamic modeling provides the currently most accurate reproduction of the whole H i Stream morphology, of its velocity, and column density profiles along L MS. The “ram pressure plus collision” scenario requires tidal dwarf galaxies, which are assumed to be the Cloud and dSph progenitors, to have left imprints in the MS and the Leading Arm, respectively. The simulated LMC and SMC have baryonic mass, kinematics, and proper motions consistent with observations. This supports a novel paradigm for the MS System, which could have its origin in material expelled toward the MW by the ancient gas-rich merger that formed M31.

  11. THE MAGELLANIC STREAM SYSTEM. I. RAM-PRESSURE TAILS AND THE RELICS OF THE COLLISION BETWEEN THE MAGELLANIC CLOUDS

    Hammer, F.; Yang, Y. B.; Flores, H.; Puech, M.; Fouquet, S., E-mail: francois.hammer@obspm.fr [GEPI, Observatoire de Paris, CNRS, 5 Place Jules Janssen, Meudon F-92195 (France)

    2015-11-10

    We have analyzed the Magellanic Stream (MS) using the deepest and the most resolved H i survey of the Southern Hemisphere (the Galactic All-Sky Survey). The overall Stream is structured into two filaments, suggesting two ram-pressure tails lagging behind the Magellanic Clouds (MCs), and resembling two close, transonic, von Karman vortex streets. The past motions of the Clouds appear imprinted in them, implying almost parallel initial orbits, and then a radical change after their passage near the N(H i) peak of the MS. This is consistent with a recent collision between the MCs, 200–300 Myr ago, which has stripped their gas further into small clouds, spreading them out along a gigantic bow shock, perpendicular to the MS. The Stream is formed by the interplay between stellar feedback and the ram pressure exerted by hot gas in the Milky Way (MW) halo with n{sub h} = 10{sup −4} cm{sup −3} at 50–70 kpc, a value necessary to explain the MS multiphase high-velocity clouds. The corresponding hydrodynamic modeling provides the currently most accurate reproduction of the whole H i Stream morphology, of its velocity, and column density profiles along L{sub MS}. The “ram pressure plus collision” scenario requires tidal dwarf galaxies, which are assumed to be the Cloud and dSph progenitors, to have left imprints in the MS and the Leading Arm, respectively. The simulated LMC and SMC have baryonic mass, kinematics, and proper motions consistent with observations. This supports a novel paradigm for the MS System, which could have its origin in material expelled toward the MW by the ancient gas-rich merger that formed M31.

  12. Expression of basal cell marker revealed by RAM11 antibody during epithelial regeneration in rabbits.

    Tadeusz Cichocki

    2010-06-01

    Full Text Available RAM11 is a mouse monoclonal anti-rabbit macrophage antibody recognizing connective tissue and vascular macrophages. Our previous report showed that RAM11 reacted with basal cells of stratified squamous epithelia of rabbit skin, oral mucosa and esophagus. The aim of the present study was to follow the appearance of RAM11 immunoreactivity in basal cells of regenerating oral epithelium in rabbits. No RAM11 immunostaining was observed in the regenerating epithelium examined on days 1 and 3 of wound healing. A weak immunofluorescence first appeared on day 7 in single basal cells and 32% of RAM11- positive basal cells were observed on day 14. These findings indicate that expression of the antigen recognized by RAM11 antibody is a transient event in the differentiation of oral keratinocytes which not always occurs during epithelial repair, although it is a constant feature of epithelial turnover in mature epithelium. Therefore this antigen can be regarded as basal cell marker only in mature stratified squamous epithelia.

  13. Characterization of Time-Dependent Behavior of Ramming Paste Used in an Aluminum Electrolysis Cell

    Orangi, Sakineh; Picard, Donald; Alamdari, Houshang; Ziegler, Donald; Fafard, Mario

    2015-12-01

    A new methodology was proposed for the characterization of time-dependent behavior of materials in order to develop a constitutive model. The material used for the characterization was ramming paste, a porous material used in an aluminum electrolysis cell, which is baked in place under varying loads induced by the thermal expansion of other components of the cell. In order to develop a constitutive model representing the paste mechanical behavior, it was necessary to get some insight into its behavior using samples which had been baked at different temperatures ranging from 200 to 1000 °C. Creep stages, effect of testing temperature on the creep, creep-recovery, as well as nonlinear creep were observed for designing a constitutive law. Uniaxial creep-recovery tests were carried out at two temperatures on the baked paste: ambient and higher. Results showed that the shape of creep curves was similar to a typical creep; recovery happened and the creep was shown to be nonlinear. Those experimental observations and the identification of nonlinear parameters of developed constitutive model demonstrated that the baked paste experiences nonlinear viscoelastic-viscoplastic behavior at different temperatures.

  14. Implementing earth observation and advanced satellite based atmospheric sounders for water resource and climate modelling

    Boegh, E.; Dellwik, Ebba; Hahmann, Andrea N.

    2010-01-01

    This paper discusses preliminary remote sensing (MODIS) based hydrological modelling results for the Danish island Sjælland (7330 km2) in relation to project objectives and methodologies of a new research project “Implementing Earth observation and advanced satellite based atmospheric sounders....... For this purpose, a) internal catchment processes will be studied using a Distributed Temperature Sensing (DTS) system, b) Earth observations will be used to upscale from field to regional scales, and c) at the largest scale, satellite based atmospheric sounders and meso-scale climate modelling will be used...

  15. A ram-pressure threshold for star formation

    Whitworth, A. P.

    2016-05-01

    In turbulent fragmentation, star formation occurs in condensations created by converging flows. The condensations must be sufficiently massive, dense and cool to be gravitationally unstable, so that they start to contract; and they must then radiate away thermal energy fast enough for self-gravity to remain dominant, so that they continue to contract. For the metallicities and temperatures in local star-forming clouds, this second requirement is only met robustly when the gas couples thermally to the dust, because this delivers the capacity to radiate across the full bandwidth of the continuum, rather than just in a few discrete spectral lines. This translates into a threshold for vigorous star formation, which can be written as a minimum ram pressure PCRIT ˜ 4 × 10-11 dyne. PCRIT is independent of temperature, and corresponds to flows with molecular hydrogen number density n_{{H_2.FLOW}} and velocity vFLOW satisfying n_{{H_2.FLOW}} v_{FLOW}^2≳ 800 cm^{-3} (km s^{-1})^2. This in turn corresponds to a minimum molecular hydrogen column density for vigorous star formation, N_{{H_2.CRIT}} ˜ 4 × 10^{21} cm^{-2} (ΣCRIT ˜ 100 M⊙ pc-2), and a minimum visual extinction AV, CRIT ˜ 9 mag. The characteristic diameter and line density for a star-forming filament when this threshold is just exceeded - a sweet spot for local star formation regions - are 2RFIL ˜ 0.1 pc and μFIL ˜ 13 M⊙ pc-2. The characteristic diameter and mass for a prestellar core condensing out of such a filament are 2RCORE ˜ 0.1 pc and MCORE ˜ 1 M⊙. We also show that fragmentation of a shock-compressed layer is likely to commence while the convergent flows creating the layer are still ongoing, and we stress that, under this circumstance, the phenomenology and characteristic scales for fragmentation of the layer are fundamentally different from those derived traditionally for pre-existing layers.

  16. Kinematics of ram filter feeding and beat-glide swimming in the northern anchovy Engraulis mordax.

    Carey, Nicholas; Goldbogen, Jeremy A

    2017-08-01

    In the dense aquatic environment, the most adept swimmers are streamlined to reduce drag and increase the efficiency of locomotion. However, because they open their mouth to wide gape angles to deploy their filtering apparatus, ram filter feeders apparently switch between diametrically opposite swimming modes: highly efficient, streamlined 'beat-glide' swimming, and ram filter feeding, which has been hypothesized to be a high-cost feeding mode because of presumed increased drag. Ram filter-feeding forage fish are thought to play an important role in the flux of nutrients and energy in upwelling ecosystems; however, the biomechanics and energetics of this feeding mechanism remain poorly understood. We quantified the kinematics of an iconic forage fish, the northern anchovy, Engraulis mordax , during ram filter feeding and non-feeding, mouth-closed beat-glide swimming. Although many kinematic parameters between the two swimming modes were similar, we found that swimming speeds and tailbeat frequencies were significantly lower during ram feeding. Rather than maintain speed with the school, a speed which closely matches theoretical optimum filter-feeding speeds was consistently observed. Beat-glide swimming was characterized by high variability in all kinematic parameters, but variance in kinematic parameters was much lower during ram filter feeding. Under this mode, body kinematics are substantially modified, and E. mordax swims more slowly and with decreased lateral movement along the entire body, but most noticeably in the anterior. Our results suggest that hydrodynamic effects that come with deployment of the filtering anatomy may limit behavioral options during foraging and result in slower swimming speeds during ram filtration. © 2017. Published by The Company of Biologists Ltd.

  17. Recognition of a heritage in danger: rammed-earth architecture in Lyon city, France

    Alex, Dorothée

    2018-04-01

    Historically, man has built with what he had underfoot: if the earthen construction is a tradition of 11 000 years old, the technique of the rammed earth (earth rammed in a formwork) is relatively new since it appeared for the first time in Tunisia in 814 BC. Exported in France, rammed earth is established mainly in Rhône-Alpes Region which has an ideal soil, rich in gravel, sand, silt and clay. Traditionally associated with the rural world, rammed earth heritage is also present in urban centers. The city of Lyon is one of the rare European cities to concentrate a large proportion of rammed earth buildings: the inventories made show that they are present in almost all the districts as well as in the suburban areas. This high density could be explained by the phenomenon of rural exodus experienced by Lyon during the nineteenth century. The agricultural populations, attracted by the prosperity of the city, then settled at the doors of this city, bringing their know-how by building with the cheaper and easier material available: earth. Rammed earth buildings are therefore located on bounder areas between the countryside and the city. They are thus found on lands that were once outside the city walls. With the advent of the industrial era at the end of the 19th century and the appearance of concrete, rammed earth constructions gradually disappeared. The constructions that we see today are therefore prior to 1900. Varied, ranging from detached houses to the 6-storey buildings, they stand as a testimony to a know-how that finds a particular resonance today, while the environmental and economic concerns are at the forefront. Little known, they constitute a heritage in danger that should be rediscovered.

  18. Modeling Organizational Cognition

    Secchi, Davide; Cowley, Stephen

    2018-01-01

    This article offers an alternative perspective on organizational cognition based on e-cognition whereby appeal to systemic cognition replaces the traditional computational model of the mind that is still extremely popular in organizational research. It uses information processing, not to explore...... inner processes, but as the basis for pursuing organizational matters. To develop a theory of organizational cognition, the current work presents an agent-based simulation model based on the case of how individual perception of scientific value is affected by and affects organizational intelligence...... units' (e.g., research groups', departmental) framing of the notorious impact factor. Results show that organizational cognition cannot be described without an intermediate meso scale - called here social organizing - that both filters and enables the many kinds of socially enabled perception, action...

  19. THE CONVERSION OF LATE-TYPE INTO EARLY-TYPE DWARF GALAXIES BY RAM-PRESSURE STRIPPING IN THE FORNAX CLUSTER

    De Rijcke, S.; Van Hese, E.; Buyle, P.

    2010-01-01

    We put to the test the hypothesis that the Fornax cluster dwarf galaxies are mostly a relatively recently acquired population, of which the star-forming, late-type members are converted into quiescent, early-type ones by ram-pressure stripping while being on orbits that plunge inside the inner few hundred kiloparsecs of the cluster. We construct dynamical models with different anisotropy profiles for the dwarf galaxy population and show that only extremely radially anisotropic orbital distributions are in agreement with the available morphological, positional, and kinematical data, especially with the radially increasing late-to-early-type ratio. This corroborates the idea that the Fornax cluster dwarfs are an infall population and that environmental factors, in this case ram-pressure stripping, play a prominent role in converting late-type dwarfs into early-type ones.

  20. The electromagnetic Ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

    Bostick, W. H.; Nardi, V.

    1985-08-01

    Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield as spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam which is generated simultaneously with the deuteron beam is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev E 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by ser action near the centers of active galaxies.

  1. Electromagnetic ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

    Bostick, W.H.; Nardi, V.

    1985-01-01

    Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield a spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam, which is generated simultaneously with the deuteron beam, is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by action near the centers of active galaxies

  2. RAM analysis of earth pressure balance tunnel boring machines: A case study

    Hasel Amini Khoshalan

    2015-12-01

    Full Text Available Earth pressure balance tunnel boring machines (EPB-TBMs are favorably applied in urban tunneling projects. Despite their numerous advantages, considerable delays and high maintenance cost are the main disadvantages these machines suffer from. Reliability, availability, and maintainability (RAM analysis is a practical technique that uses failure and repair dataset obtained over a reasonable time for dealing with proper machine operation, maintenance scheduling, cost control, and improving the availability and performance of such machines. In the present study, a database of failures and repairs of an EBP-TBM was collected in line 1 of Tabriz subway project over a 26-month interval of machine operation. In order to model the reliability of the TBM, this machine was divided into five distinct subsystems including mechanical, electrical, hydraulic, pneumatic, and water systems in a series configuration. According to trend and serial correlation tests, the renewal processes were applied, for analysis of all subsystems. After calculating the reliability and maintainability functions for all subsystems, it was revealed that the mechanical subsystem with the highest failure frequency has the lowest reliability and maintainability. Similarly, estimating the availability of all subsystems indicated that the mechanical subsystem has a relatively low availability level of 52.6%, while other subsystems have acceptable availability level of 97%. Finally, the overall availability of studied machine was calculated as 48.3%.

  3. Investigating Phase Transform Behavior in Indium Selenide Based RAM and Its Validation as a Memory Element

    Swapnil Sourav

    2016-01-01

    Full Text Available Phase transform properties of Indium Selenide (In2Se3 based Random Access Memory (RAM have been explored in this paper. Phase change random access memory (PCRAM is an attractive solid-state nonvolatile memory that possesses potential to meet various current technology demands of memory design. Already reported PCRAM models are mainly based upon Germanium-Antimony-Tellurium (Ge2Sb2Te5 or GST materials as their prime constituents. However, PCRAM using GST material lacks some important memory attributes required for memory elements such as larger resistance margin between the highly resistive amorphous and highly conductive crystalline states in phase change materials. This paper investigates various electrical and compositional properties of the Indium Selenide (In2Se3 material and also draws comparison with its counterpart mainly focusing on phase transform properties. To achieve this goal, a SPICE model of In2Se3 based PCRAM model has been reported in this work. The reported model has been also validated to act as a memory cell by associating it with a read/write circuit proposed in this work. Simulation results demonstrate impressive retentivity and low power consumption by requiring a set pulse of 208 μA for a duration of 100 μs to set the PCRAM in crystalline state. Similarly, a reset pulse of 11.7 μA for a duration of 20 ns can set the PCRAM in amorphous state. Modeling of In2Se3 based PCRAM has been done in Verilog-A and simulation results have been extensively verified using SPICE simulator.

  4. PERFORMANCE OF FAT-TAILED RAMS FED COMPLETE FEED BASED OIL PALM FRONDS

    A. Hamidah

    2014-10-01

    Full Text Available The aim of this experiment was to evaluate the performance of fat-tailed rams fed complete feedbased oil palm fronds (OPF. This experiment was arranged in Completely Randomized Design (CRDwith 5 treatments and 4 replications i.e. 0, 25, 50, 75 and 100% of OPF substituting fields grass incomplete feed for A, B, C, D and E treatments, respectively. Twenty fat-tailed rams were fed twice at08.00 and 14.00 with pellet of complete feed for 4 months. The result of this experiment showed thatOPF significantly influenced nutrient consumption, average daily gain (ADG and feed efficiency ratio(FER. Oil palm fronds significantly affected (P<0.05 fat-tailed rams’s dry matter intake (DMI, organicmatter intake (OMI, crude protein intake (CPI, ADG and FER. The highest DMI, OMI, CPI, ADG, andFER of fat-tailed rams was in C treatment and significantly different from the others. It was concludedthat C treatment was the best treatment which can give the best fat-tailed rams performance. The OPFcan be used to replace the field grass as feed up to 75% proportion in complete feed and could increasethe performance and productivity of fat-tailed rams.

  5. PERFORMANCE OF FAT-TAILED RAMS FED COMPLETE FEED BASED OIL PALM FRONDS

    A. Hamidah

    2011-09-01

    Full Text Available The aim of this experiment was to evaluate the performance of fat-tailed rams fed complete feed based oil palm fronds (OPF. This experiment was arranged in Completely Randomized Design (CRD with 5 treatments and 4 replications i.e. 0, 25, 50, 75 and 100% of OPF substituting fields grass in complete feed for A, B, C, D and E treatments, respectively. Twenty fat-tailed rams were fed twice at 08.00 and 14.00 with pellet of complete feed for 4 months. The result of this experiment showed that OPF significantly influenced nutrient consumption, average daily gain (ADG and feed efficiency ratio (FER. Oil palm fronds significantly affected (P<0.05 fat-tailed rams’s dry matter intake (DMI, organic matter intake (OMI, crude protein intake (CPI, ADG and FER. The highest DMI, OMI, CPI, ADG, and FER of fat-tailed rams was in C treatment and significantly different from the others. It was concluded that C treatment was the best treatment which can give the best fat-tailed rams performance. The OPF can be used to replace the field grass as feed up to 75% proportion in complete feed and could increase the performance and productivity of fat-tailed rams.

  6. A Theory for Stability and Buzz Pulsation Amplitude in Ram Jets and an Experimental Investigation Including Scale Effects

    Trimpi, Robert L

    1956-01-01

    From a theory developed on a quasi-one-dimensional-flow basis, it is found that the stability of the ram jet is dependent upon the instantaneous values of mass flow and total pressure recovery of the supersonic diffuser and immediate neighboring subsonic diffuser. Conditions for stable and unstable flow are presented. The theory developed in the report is in agreement with the experimental data of NACA-TN-3506 and NACA-RM-L50K30. A simple theory for predicting the approximate amplitude of small pressure pulsation in terms of mass-flow decrement from minimum-stable mass flow is developed and found to agree with experiments. Cold-flow tests at a Mach number of 1.94 of ram-jet models having scale factors of 3.15:1 and Reynolds number ratios of 4.75:1 with several supersonic diffuser configurations showed only small variations in performance between geometrically similar models. The predominant variation in steady-flow performance resulted from the larger boundary layer in the combustion chamber of the low Reynolds number models. The conditions at which buzz originated were nearly the same for the same supersonic diffuser (cowling-position angle) configurations in both large and small diameter models. There was no appreciable variation in stability limits of any of the models when the combustion-chamber length was increased by a factor of three. The unsteady-flow performance and wave patterns were also similar when considered on a reduced-frequency basis determined from the relative lengths of the model. The negligible effect of Reynolds number on stability of the off-design configurations was not anticipated in view of the importance of boundary layer to stability, and this result should not be construed to be generally applicable. (author)

  7. Ageing of fibre reinforced polymer composite selected as a bearing material for Rams of 540 MWe fuelling machine

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2006-01-01

    Fibre-reinforced-polymer-composite material has been suggested as a bearing material to overcome tribological problems witnessed during the testing of Ram assembly of the 540 MWe fuelling machine at RTD. After successful trials at B-Ram the composite material has been adapted for B-RAM, C-Ram and RDB head at fuelling machines being tested at RTD, Hall 7 and at Tarapur. Laboratory evaluations were also carried out at Tribology Lab RTD to study effect of radiation on the composite. Paper deals with the various aspects of life prediction of this material in term of wear and radiation damage. (author)

  8. A study of environmental radon levels in rammed earth dwellings in the south west of Western Australia

    Walsh, M.; Jennings, P.

    2002-01-01

    Indoor radon and thoron progeny Equilibrium Equivalent Concentrations (EEC) were measured with a portable 'Radon Sniffer' in 10 rammed earth dwellings and 10 conventional dwellings in Margaret River in the South West of Western Australia. Natural background gamma radiation was also measured within the dwellings. The results of this study show that the mean indoor radon progeny concentrations in rammed earth and non-rammed earth dwellings was 24 Bq m -3 EEC and 9.3 Bq m -3 EEC respectively. The mean indoor thoron progeny concentrations in rammed earth and non-rammed earth dwellings was 3.9 Bq m -3 EEC and 0.8 Bq m -3 EEC respectively. The ranges of combined indoor radon and thoron progeny concentrations in rammed earth and non-rammed earth dwellings were between 2.1 and 76 Bq m -3 EEC and 2.0 and 27 Bq m -3 EEC respectively. The mean annual effective radiation dose equivalents from combined indoor radon and thoron progeny concentrations EEC using UNSCEAR's (1982) conversion factors in rammed earth and non-rammed earth dwellings were 4.1 mSv y -1 and 2.2 mSv y -1 respectively. Copyright (2002) Australasian Radiation Protection Society Inc

  9. Multi-scale modeling and analysis of convective boiling: towards the prediction of CHF in rod bundles

    Niceno, B.; Sato, Y.; Badillo, A.; Andreani, M.

    2010-01-01

    In this paper we describe current activities on the project Multi-Scale Modeling and Analysis of convective boiling (MSMA), conducted jointly by the Paul Scherrer Institute (PSI) and the Swiss Nuclear Utilities (Swissnuclear). The long-term aim of the MSMA project is to formulate improved closure laws for Computational Fluid Dynamics (CFD) simulations for prediction of convective boiling and eventually of the Critical Heat Flux (CHF). As boiling is controlled by the competition of numerous phenomena at various length and time scales, a multi-scale approach is employed to tackle the problem at different scales. In the MSMA project, the scales on which we focus range from the CFD scale (macro-scale), bubble size scale (meso-scale), liquid micro-layer and triple interline scale (micro-scale), and molecular scale (nano-scale). The current focus of the project is on micro- and meso- scales modeling. The numerical framework comprises a highly efficient, parallel DNS solver, the PSI-BOIL code. The code has incorporated an Immersed Boundary Method (IBM) to tackle complex geometries. For simulation of meso-scales (bubbles), we use the Constrained Interpolation Profile method: Conservative Semi-Lagrangian 2nd order (CIP-CSL2). The phase change is described either by applying conventional jump conditions at the interface, or by using the Phase Field (PF) approach. In this work, we present selected results for flows in complex geometry using the IBM, selected bubbly flow simulations using the CIP-CSL2 method and results for phase change using the PF approach. In the subsequent stage of the project, the importance of effects of nano-scale processes on the global boiling heat transfer will be evaluated. To validate the models, more experimental information will be needed in the future, so it is expected that the MSMA project will become the seed for a long-term, combined theoretical and experimental program

  10. Nb multilayer planarization technology for a subnanosecond Josephson 1K-bit RAM

    Nagasawa, S.; Wada, Y.; Tsuge, H.; Hidaka, M.; Ishida, I.; Tahara, S.

    1989-01-01

    Nb multilayer planarization technology has been developed. This planarization technology consists of an etch-back technique using 2000-molecular weight polystyrene and SiO/sub 2/ for the junction layer and wiring layers, and a tapered edge etching technique for contact between individual wiring layers. A Josephson 1K-bit random access memory (RAM) has been fabricated using this planarization technology. Excellent planarity, wherein level differences in all step areas are reduced to less than 1/20th of their original value, was achieved in the multilayer structure of the RAM. Moreover, appropriate RAM operations, with 570ps minimum access time and 13mW power dissipation, were confirmed

  11. Array-level stability enhancement of 50 nm AlxOy ReRAM

    Iwasaki, Tomoko Ogura; Ning, Sheyang; Yamazawa, Hiroki; Takeuchi, Ken

    2015-12-01

    ReRAM's low voltage and low current programmability are attractive features to solve the scaling issues of conventional floating gate Flash. However, read instability in ReRAM is a critical issue, due to random telegraph noise (RTN), sensitivity to disturb and retention. In this work, the array-level characteristics of read stability in 50 nm AlxOy ReRAM are investigated and a circuit technique to improve stability is proposed and evaluated. First, in order to quantitatively assess memory cell stability, a method of stability characterization is defined. Next, based on this methodology, a proposal to improve read stability, called ;stability check loop; is evaluated. The stability check loop is a stability verification procedure, by which, instability improvement of 7×, and read error rate improvement of 40% are obtained.

  12. GTL Based Internet of Things Enable Processor Specific RAM Design on 65nm FPGA

    Moudgil, Aditi; Garg, Kanika; Pandey, Bishwajeet

    2015-01-01

    In this work, we are making Energy Efficient Internet of Things (IoTs) Enable RAM. In order to make it energy efficient, we are using Gunning Transceiver Logic (GTL) IO Standard and Gunning Transceiver Logic Plus (GTLP). We are using the 4 different members of GTL and GTLP IO standards family...... and searching the most energy efficient among them. We observed that when we use 3.6 GHz operating frequency, there is 90.2% reduction in I/O power when we used GTL instead of GTLP_DCI. We are inserting 128-bit IP address in RAM to make internet of things enable RAM. Finally, we are operating our IOTs Enable...

  13. Transport of RAM in tanks: how to fit into the IAEA safety philosophy

    Schulz-Forberg, B.; Ulrich, A.

    1983-01-01

    The transport of radioactive materials (RAM) in tanks will become a field of increasing interest. Especially for substances with low radioactive hazard but may be with subsidary risks which can overrule the RAM-philosophy. The IAEA should pay attention to the problem whether to take over a more active part in the non-nuclear field of transport regulations by influencing and using the outcome of RAM transport conditions or to incorporate some or all provisions for tank transport in their own regulations. The necessity to solve the problems of shipments of substances with low radioactive hazards but high chemical hazards is highlighted by the requirements for UF 6 -cylinders. Up to now UF 6 is listed in class 7 only, but the IAEA requirements for large UF 6 cylinders don't come up to the level of requirements needed for the toxic and corrosive nature of UF 6 . 5 references

  14. Progress of ram acceleration with ISL's RAMAC 30

    Seiler, F.; Patz, G.; Smeets, G.; Srulijes, J. [French-German Res. Inst., Saint-Louis (France)

    2000-11-01

    G. Smeets (1988) published a new concept for a ram accelerator with guiding tube rails for firing rail stabilized projectiles. This concept replaces fin stabilized projectiles accelerated in a cylindrical bore. The rail tube idea offers some advantages, e.g., no sabot is necessary as required for fin guided projectiles, simple projectile geometry, and possibility of varying the inner tube geometry. This principle was tested in 1993 and 1994 in rail tube version I and is now again under investigation since the beginning of 1997 in our RAMAC 30 in version II. In the rail tube concept, circular and finless projectiles are guided in a ram-tube equipped with five inner rails. At the moment we use a ram-section with a length of about 4.8 meters. A conventional powder gun serves as pre-accelerator. In the gun tube with a length of 2.8 meters, projectiles of about 150 grams are accelerated to a muzzle velocity of approximately 1800 m/s which is the initial velocity at the entrance of the ram-section. For successful operating a ram accelerator, the heat release must be limited to avoid ''thermal choking'' followed by an ''unstart''. This choking phenomenon will be investigated in detail in this paper from the gasdynamic point of view in order to predict the right mixture for the given flow conditions around the ram projectile. Moreover, to avoid a firing failure, the material point of view must also be considered. Some recent firings have been done using aluminium, titanium and steel as test materials and its behaviour is discussed herein in detail. The first outcome is for example, for a given projectile geometry and a given gas mixture with a steel cowling no ignition occurs, whereas with aluminium or titanium as combustor surface material the ignition starts well followed by a projectile acceleration. (orig.)

  15. Review of radiation effects on ReRAM devices and technology

    Gonzalez-Velo, Yago; Barnaby, Hugh J.; Kozicki, Michael N.

    2017-08-01

    A review of the ionizing radiation effects on resistive random access memory (ReRAM) technology and devices is presented in this article. The review focuses on vertical devices exhibiting bipolar resistance switching, devices that have already exhibited interesting properties and characteristics for memory applications and, in particular, for non-volatile memory applications. Non-volatile memories are important devices for any type of electronic and embedded system, as they are for space applications. In such applications, specific environmental issues related to the existence of cosmic rays and Van Allen radiation belts around the Earth contribute to specific failure mechanisms related to the energy deposition induced by such ionizing radiation. Such effects are important in non-volatile memory as the current leading technology, i.e. flash-based technology, is sensitive to the total ionizing dose (TID) and single-event effects. New technologies such as ReRAM, if competing with or complementing the existing non-volatile area of memories from the point of view of performance, also have to exhibit great reliability for use in radiation environments such as space. This has driven research on the radiation effects of such ReRAM technology, on both the conductive-bridge RAM as well as the valence-change memories, or OxRAM variants of the technology. Initial characterizations of ReRAM technology showed a high degree of resilience to TID, developing researchers’ interest in characterizing such resilience as well as investigating the cause of such behavior. The state of the art of such research is reviewed in this article.

  16. Performance analysis of STT-RAM with cross shaped free layer using Heusler alloys

    Bharat Kumary, Tangudu; Ghosh, Bahniman; Awadhiya, Bhaskar; Verma, Ankit Kumar

    2016-01-01

    We have investigated the performance of a spin transfer torque random access memory (STT-RAM) cell with a cross shaped Heusler compound based free layer using micromagnetic simulations. We have designed a free layer using a Cobalt based Heusler compound. Simulation results clearly show that the switching time from one state to the other state has been reduced, also it has been found that the critical switching current density (to switch the magnetization of the free layer of the STT RAM cell) is reduced.

  17. Optical RAM-enabled cache memory and optical routing for chip multiprocessors: technologies and architectures

    Pleros, Nikos; Maniotis, Pavlos; Alexoudi, Theonitsa; Fitsios, Dimitris; Vagionas, Christos; Papaioannou, Sotiris; Vyrsokinos, K.; Kanellos, George T.

    2014-03-01

    The processor-memory performance gap, commonly referred to as "Memory Wall" problem, owes to the speed mismatch between processor and electronic RAM clock frequencies, forcing current Chip Multiprocessor (CMP) configurations to consume more than 50% of the chip real-estate for caching purposes. In this article, we present our recent work spanning from Si-based integrated optical RAM cell architectures up to complete optical cache memory architectures for Chip Multiprocessor configurations. Moreover, we discuss on e/o router subsystems with up to Tb/s routing capacity for cache interconnection purposes within CMP configurations, currently pursued within the FP7 PhoxTrot project.

  18. Growth and Carcass Physical Components of Thin Tail Rams Fed on Different Levels of Rice Bran

    Rianto, E; Lindasari, E; Purbowati, E

    2006-01-01

    This experiment was aimed to investigate the effect of rice bran supplementation on live weight gain (LWG), the proportion of carcass meat, bone and fat of Thin Tail Rams. Twelve thin tail rams, aged about 12 months, weighed 20.95 ± 1.52 kg (CV = 7.26%) were allocated into a Randomized Block Design with 2 blocks and 3 treatments. The treatments applied were levels of rice bran supplementation, i.e. Napier grass ad libitum without rice bran (T1), Napier grass ad libitum and 200 g rice bran (T2...

  19. Software for dimensioning of hydraulic ram; Software para dimensionamento de carneiro hidraulico

    Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina, CE (Brazil); Borges, Grace Anne Pontes [Faculdade de Tecnologia de Sao Paulo (FATEC), Sao Paulo, SP (Brazil). Dept. de Processamento de Dados; Borges, Everton Pontes [Centro Federal de Educacao Tecnologica do Rio Grande do Norte, Natal, RN (Brazil). Curso Tecnologia em Automacao Industrial

    2004-07-01

    The search for new renewable energy sources sometimes takes us always from existing solutions applications. The hydraulic ram is equipment developed in 1796, used to water pumping, without using electricity energy and can be used for small rural producer in places where the conventional electricity grid access is limited. The objective of this work is Software introducing, developed to help a commercial hydraulic ram dimensioning, which isn't necessary previous hydraulic knowledge, and can also be used as a didactic resource at technicians and technologists courses in subjects as hydraulics or irrigation. (author)

  20. Purification of beta-acetylglucosaminase and beta-galactosidase from ram testis.

    Caygill, J C; Roston, C P; Jevons, F R

    1966-02-01

    1. The presence of beta-galactosidase (EC 3.2.1.23) in an acetic acid extract of ram testis is reported. Some properties of the crude enzyme preparation were studied. 2. The purification of beta-acetylglucosaminase (EC 3.2.1.30) and of beta-galactosidase from the ram-testis extract by ammonium sulphate precipitation and chromatography on a CM-cellulose column is described. 3. The final purifications of the separated enzymes achieved were for the beta-acetylglucosaminase 35 times and for the beta-galactosidase 99 times. 4. The possibility of using DEAE-cellulose and Sephadex G-200 to purify the enzymes was investigated.

  1. Design of data transportation based on dual-port RAM in IMS system

    Zhang Guohui; Li Yongping

    2010-01-01

    Ion mobility spectroscopy (IMS) is a rugged, portable, sensitive, low cost, field instrumental technique capable of trace organic detection and monitoring for environmental pollutants, pesticides, explosives, narcotics, and other analytes, hence it is of great significance to social security and stability. High rate data transmission mechanism between DSP processor and ARM core is required in the electronic system of IMS. After careful comparison of UART and dual port RAM, a new design based on dual port RAM that can be applied to other similar systems. (authors)

  2. Integrated approach for combining sustainability and safety into a RAM analysis, RAM2S (Reliability, Availability, Maintainability, Sustainability and Safety) towards greenhouse gases emission targets

    Alvarenga, Tobias V. [Det Norske Veritas (DNV), Hovik, Oslo (Norway)

    2009-07-01

    This paper aims to present an approach to integrate sustainability and safety concerns on top of a typical RAM Analysis to support new enterprises to find alternatives to align themselves to the greenhouse gases emission targets, measured as CO{sub 2} (carbon dioxide) equivalent. This approach can be used to measure the impact of the potential CO{sub 2} equivalent emission levels mainly related to new enterprises with high CO{sub 2} content towards environment and production, as per example, the extraction of oil and gas from the Brazilian Pre-salt layers. In this sense, this integrated approach, combining Sustainability and Safety into a RAM analysis, RAM2S (Reliability, Availability, Maintainability, Sustainability and Safety), can be used to assess the impact of CO{sub 2} 'production' along the entire enterprise life-cycle, including the impact of possible facility shutdown due to emission restrictions limits, as well as due to the occurrence of additional failures modes related to CO{sub 2} corrosion capabilities. Thus, at the end, this integrated approach would allow companies to find out a more cost-effective alternative to adapt their business into the global warming reality, overcoming the inherent threats of greenhouse gases. (author)

  3. Development of a 1 D hybrid HTC model using CFD simulations for the analysis of direct contact condensation as the driving force for water hammers

    Ceuca, Christian Sabin; Macian-Juan, Rafael [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Nukleartechnik

    2013-03-15

    A Hybrid Heat Transfer Coefficient module has been developed based on two Surface Renewal Theory models using CFD simulations. The validation of the model has been done on a meso-scale computational grid for CFD simulations and on a macro-scale computational grid for System Code analysis. The CFD simulation was performed for a stratified co-current two phase flow between saturated steam and sub-cooled water while the System Code analysis was performed for a Condensation Induced Water Hammer experiment. (orig.)

  4. Role of the GRAS transcription factor ATA/RAM1 in the transcriptional reprogramming of arbuscular mycorrhiza in Petunia hybrida.

    Rich, Mélanie K; Courty, Pierre-Emmanuel; Roux, Christophe; Reinhardt, Didier

    2017-08-08

    Development of arbuscular mycorrhiza (AM) requires a fundamental reprogramming of root cells for symbiosis. This involves the induction of hundreds of genes in the host. A recently identified GRAS-type transcription factor in Petunia hybrida, ATA/RAM1, is required for the induction of host genes during AM, and for morphogenesis of the fungal endosymbiont. To better understand the role of RAM1 in symbiosis, we set out to identify all genes that depend on activation by RAM1 in mycorrhizal roots. We have carried out a transcript profiling experiment by RNAseq of mycorrhizal plants vs. non-mycorrhizal controls in wild type and ram1 mutants. The results show that the expression of early genes required for AM, such as the strigolactone biosynthetic genes and the common symbiosis signalling genes, is independent of RAM1. In contrast, genes that are involved at later stages of symbiosis, for example for nutrient exchange in cortex cells, require RAM1 for induction. RAM1 itself is highly induced in mycorrhizal roots together with many other transcription factors, in particular GRAS proteins. Since RAM1 has previously been shown to be directly activated by the common symbiosis signalling pathway through CYCLOPS, we conclude that it acts as an early transcriptional switch that induces many AM-related genes, among them genes that are essential for the development of arbuscules, such as STR, STR2, RAM2, and PT4, besides hundreds of additional RAM1-dependent genes the role of which in symbiosis remains to be explored. Taken together, these results indicate that the defect in the morphogenesis of the fungal arbuscules in ram1 mutants may be an indirect consequence of functional defects in the host, which interfere with nutrient exchange and possibly other functions on which the fungus depends.

  5. Modeling Time-Dependent Behavior of Concrete Affected by Alkali Silica Reaction in Variable Environmental Conditions.

    Alnaggar, Mohammed; Di Luzio, Giovanni; Cusatis, Gianluca

    2017-04-28

    Alkali Silica Reaction (ASR) is known to be a serious problem for concrete worldwide, especially in high humidity and high temperature regions. ASR is a slow process that develops over years to decades and it is influenced by changes in environmental and loading conditions of the structure. The problem becomes even more complicated if one recognizes that other phenomena like creep and shrinkage are coupled with ASR. This results in synergistic mechanisms that can not be easily understood without a comprehensive computational model. In this paper, coupling between creep, shrinkage and ASR is modeled within the Lattice Discrete Particle Model (LDPM) framework. In order to achieve this, a multi-physics formulation is used to compute the evolution of temperature, humidity, cement hydration, and ASR in both space and time, which is then used within physics-based formulations of cracking, creep and shrinkage. The overall model is calibrated and validated on the basis of experimental data available in the literature. Results show that even during free expansions (zero macroscopic stress), a significant degree of coupling exists because ASR induced expansions are relaxed by meso-scale creep driven by self-equilibriated stresses at the meso-scale. This explains and highlights the importance of considering ASR and other time dependent aging and deterioration phenomena at an appropriate length scale in coupled modeling approaches.

  6. A Novel Nondestructive Bit-Line Discharging Scheme for Deep Submicrometer STT-RAM

    Zeinali, Behzad; Madsen, Jens Kargaard; Raghavan, Praveen

    . In this paper, we propose a novel non-destructive self-reference sensing scheme for STT-RAM. The proposed technique overcomes the large bit-to-bit variation of MTJ resistance. In the proposed scheme, the stored value in the STTRAM cell preserves, hence, the long write-back operation is eliminated. Besides...

  7. Evaluation of semen extenders for short-term storage of ram semen at 4° C

    Preliminary studies found that progressive motility of ram sperm declined ~75% when stored at 4° C for 24 h, and continued to decline over time when using extenders supplemented with 5% egg yolk. The current study evaluated the effects of different combinations of extenders, ethylene glycol (EG), eg...

  8. CRYOPRESERVATION OF RAM SPERM FROM AUTOCHTHONOUS BREEDS DURING A NON-MATING SEASON

    Milko SABEV

    2007-07-01

    Full Text Available It is possible to collect and successfully cryopreserve ejaculates in a non-mating season from rams of the autochthonous breeds Karakachan, Cooper-red Shumen and Karnobat-local, raised in Bulgaria. Studies are in progress aiming the elaboration of optimal cryoprotective extenders and freezing technology.

  9. Comparing interfertility data with random amplified microsatellites DNA (RAMS) studies in Ganoderma Karst. Taxonomy.

    Nudin, Nur Fatihah Hasan; S, Siddiquee

    2012-03-01

    The taxonomy of the causal pathogen of basal stem rot of oil palms, Ganoderma is somewhat problematic at present. In order to determine the genetic distance relationship between G. boninense isolates and non-boninense isolates, a random amplified microsatellites DNA (RAMS) technique was carried out. The result was then compared with interfertility data of G. boninense that had been determined in previous mating studies to confirm the species of G. boninense. Dendrogram from cluster analysis based on UPGMA of RAMS data showed that two major clusters, I and II which separated at a genetic distance of 0.7935 were generated. Cluster I consisted of all the biological species G. boninense isolates namely CNLB, GSDK 3, PER 71, WD 814, GBL 3, GBL 6, OC, GH 02, 170 SL and 348781 while all non-boninense isolates namely G. ASAM, WRR, TFRI 129, G. RES, GJ, and CNLM were grouped together in cluster II. Although the RAMS markers showed polymorphisms in all the isolates tested, the results obtained were in agreement with the interfertility data. Therefore, the RAMS data could support the interfertility data for the identification of Ganoderma isolates.

  10. Ramón y Cajal erroneously identified as Camillo Golgi on a souvenir postage stamp.

    Triarhou, Lazaros C; del Cerro, Manuel

    2012-01-01

    Focusing on a philatelic oddity that erringly identifies a picture of Santiago Ramón y Cajal as that of Camillo Golgi, this brief article examines official and unofficial stamp issues honoring the two great neuroanatomists, one from Spain and the other from Italy, who were early Nobel Prize winners in Physiology or Medicine.

  11. An energy and cost efficient majority-based RAM cell in quantum-dot cellular automata

    Milad Bagherian Khosroshahy

    Full Text Available Nanotechnologies, notably quantum-dot cellular automata, have achieved major attentions for their prominent features as compared to the conventional CMOS circuitry. Quantum-dot cellular automata, particularly owning to its considerable reduction in size, high switching speed and ultra-low energy consumption, is considered as a potential alternative for the CMOS technology. As the memory unit is one of the most essential components in a digital system, designing a well-optimized QCA random access memory (RAM cell is an important area of research. In this paper, a new five-input majority gate is presented which is suitable for implementing efficient single-layer QCA circuits. In addition, a new RAM cell with set and reset capabilities is designed based on the proposed majority gate, which has an efficient and low-energy structure. The functionality, performance and energy consumption of the proposed designs are evaluated based on the QCADesigner and QCAPro tools. According to the simulation results, the proposed RAM design leads to on average 38% lower total energy dissipation, 25% smaller area, 20% lower cell count, 28% lower delay and 60% lower QCA cost as compared to its previous counterparts. Keywords: Quantum-dot cellular automata (QCA, Majority gate, Random access memory (RAM, Energy efficiency

  12. CMOS/SOS RAM transient radiation upset and ''inversion'' effect investigation

    Nikiforov, A.Y.; Poljakov, I.V.

    1996-01-01

    The Complementary Metal-Oxide-Semiconductor/Silicon-on-Sapphire Random Access Memory (CMOS/SOS RAM) transient upset and inversion effect were investigated with pulsed laser, pulsed voltage generator and low-intensity light simulators. It was found that the inversion of information occurs due to memory cell photocurrents simultaneously with the power supply voltage drop transfer to memory cells outputs

  13. On the sexual cycle of mature bachelor bontebok rams at the ...

    On the sexual cycle of mature bachelor bontebok rams at the Bontebok National Park, Swellendam. J.D. Skinner, H.M. Dott, V de Vos, R.P. Millar. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO ...

  14. SSTL based thermal and power efficient RAM design on 28nm FPGA for spacecraft

    Kalia, Kartik; Pandey, Bishwajeet; Hussain, D. M.A.

    2016-01-01

    In this paper, an approach is made to design a Thermal and Power efficient RAM for that reason we have used DDR4L memory and six different members of SSTL I/Os standards on 28nm technology. Every spacecraft requires most energy efficient electronic system and for that very purpose we have designe...

  15. A new procedure for static RAM evaluation under x-ray pulses

    Marec, R.; Gaillard, R.; Mary, P.; Fairbank, X.; Ferrant, R.; Palau, J.M.; Gasiot, J.

    1994-01-01

    An original method, to identify the initial patterns that are the most favorable to obtain upsets under X-ray pulses, has been developed on Static RAMs in the standby mode. The results obtained with these initial patterns are interesting in order to analyze the radiation induced failures

  16. Species-specific nested PCR as a diagnostic tool for Brucella ovis infection in rams

    L.F. Costa

    2013-02-01

    Full Text Available The aim of the present study was to evaluate a species-specific nested PCR based on a previously described species-specific PCR for detection of B. ovis in semen and urine samples of experimentally infected rams. The performance of the species-specific nested PCR was compared with the results of a genus-specific PCR. Fourteen rams were experimentally infected with the Brucella ovis REO 198 strain and samples of semen and urine were collected every week up to 180 days post infection. Out of 83 semen samples collected, 42 (50.6% were positive for the species-specific nested PCR, and 23 (27.7% were positive for the genus-specific PCR. Out of 75 urine samples, 49 (65.3% were positive for the species-specific nested PCR, whereas 11 (14.6% were genus-specific PCR positive. Species-specific nested PCR was significantly more sensitive (P<0.001 than the genus-specific PCR in semen and urine from experimentally infected rams. In conclusion, the species-specific nested PCR developed in this study may be used as a diagnostic tool for the detection of B. ovis in semen and urine samples from suspected rams.

  17. Effect of adaptation and heat stress on reproductive performances of fat-tail Awassi rams in eastern mediterranean

    Abi Saab, S.; Darwish, W.Y.; Aad, P.; Sleiman, F.T.; Kallassy, N.; Aad, Y.

    2011-01-01

    The Awassi fat-tail sheep is desired in the Middle East and Sahara for its hardiness and resistance. In this region, the adaptability of Awassi rams to elevated heat stress is controversial. The objective of this study was to assess the effect of ambient or testicular 43 deg C heat on semen characteristics. 12 Awassi rams of 1.2 to 2 years were allowed an initial adaptation period (P0), followed by two experimental phases (P1 and P2), each including a period of heat stress (HS1 and HS2) followed by a period of recovery from heat stress (R1and R2). Heat stress conditions were considered when ambient temperature (Group 2) or testicular environment (Group 3) reached 42 to 44 deg C. Control animals (Group 1) were exposed to ambient environmental conditions. Temperature-humidity index (THI) as a relationship of ambient temperature, wet and dry humidity effect along with respiration and pulse rate, body temperature and live body weight (BW) were measured weekly as adaptation parameters. Reproductive parameters assessed included scrotum circumference and testicular volume measured twice per heat stress period, whereas semen volume density,concentration and motility were measured twice weekly. Data were analyzed using the mixed procedure of SAS under a time series analysis model, with treatment and time nested within period as main effects, and treatment by time within period as interaction terms. Treatment means were separated using Fisher protected LSD. Results showed a THI of 25.7 during therest periods (R1 and R2), 30 during HS1 and 28 during HS2. BW decreased with ambient stress, whereas respiration rate increased during heat stress periods (HS1 and HS2). Testes volume decreased with both ambient and testicular heat stress, whereas testicular circumference was not affected by these conditions. Semen concentration decreased whereas semen volume increased with ambient but not testicular heat stress. Spermatozoa abnormalities increased in R1 following heat stress (HS1

  18. Reproductive performance of postpartum ewes treated with insulin or progesterone hormones in association with ram effect.

    Ferreira-Silva, J C; Basto, Srl; Tenório Filho, F; Moura, M T; Silva Filho, M L; Oliveira, Mal

    2017-08-01

    The reproductive performance of postpartum Santa Inês (SI) and Morada Nova (MN) ewes treated with insulin or progesterone hormones in association with ram effect was evaluated. Ewes from SI (n = 69) and MN (n = 69) breeds were randomly allocated to three groups of each breed (T1-ram effect only; T2-ram effect + insulin; T3-ram effect + progesterone). Progesterone concentrations (ηg/ml; mean ± SD) before and after introduction of rams (n = 6) were 0.51 ± 0.22 and 3.78 ± 0.68 (T1), 0.65 ± 0.21 and 3.77 ± 0.78 (T2) and 0.52 ± 0.21 and 3.84 ± 0.84 (T3) in SI ewes and 0.74 ± 0.19 and 3.71 ± 0.56 (T1), 0.70 ± 0.21 and 3.79 ± 0.75 (T2) and 0.81 ± 0.14 and 3.87 ± 0.80 (T3) in MN ewes, respectively. Thus, lower progesterone concentrations were found before the introduction of rams (p ewes and at 64 (T1), 40 (T2) and 44 (T3) hr in MN ewes. The mean number of ovulations was similar between groups (p > .05), was 1.3 ± 0.51 (T1), 1.5 ± 0.54 (T2) and 1.6 ± 0.51 (T3) in SI ewes and 1.3 ± 0.51 (T1), 1.6 ± 0.51 (T2) and 1.6 ± 0.51 (T3) in MN ewes. In conclusion, the ram effect alone is effective at inducing and synchronizing oestrus in sheep under postpartum anoestrus, irrespective of hormone treatments. © 2017 Blackwell Verlag GmbH.

  19. Experimental and simulation study of the effects of cosmic particles on CMOS/SOS RAMs

    Worley, E.; Williams, R.; Groninger, J.

    1990-01-01

    Van De Graaff particle accelerator data was taken on three different CMOS/SOS RAM cells. The resulting LET upset thresholds were then used to calculate the deposited charge needed to upset the cells. Detailed SPICE simulations of the various cells were used to determine the collected charge required for upset. A comparison of the two values indicated that the charge needed to upset the cells was greater than the deposited charge, thus confirming Rollins' results. Shorter channel lengths and higher power supply voltages caused the ratio, M, of upset charge to deposited charge to increase. As a result of this multiplication factor, actual devices are more likely to upset (i.e., upset at lower energy) than expected from an analysis of only the collected charge. A mixed mode simulator was then used to model the charge collection process. This simulator study showed that the M factor is a very fluid number which is dependent on minority carrier lifetime, drain voltage, and the switching dynamics of the cell in addition to the dependence on mobility ratio and channel length. Parasitic bipolar gain at high injection levels appears to be the primary mechanism allowing collected charge to be greater than deposited charge. In conclusion, the simulator and experimental data show that, as floating body static memory transistors are down scaled, the particle energy needed to upset the cell is reduced because of the enhanced parasitic bipolar gain effect as well as a reduction in the node capacitance. This result is shown by simulation to also apply to fully depleted SOI transistors

  20. Jellyfish: the origin and distribution of extreme ram-pressure stripping events in massive galaxy clusters

    McPartland, Conor; Ebeling, Harald; Roediger, Elke; Blumenthal, Kelly

    2016-01-01

    We investigate the observational signatures and physical origin of ram-pressure stripping (RPS) in 63 massive galaxy clusters at z = 0.3-0.7, based on images obtained with the Hubble Space Telescope. Using a training set of a dozen `jellyfish' galaxies identified earlier in the same imaging data, we define morphological criteria to select 211 additional, less obvious cases of RPS. Spectroscopic follow-up observations of 124 candidates so far confirmed 53 as cluster members. For the brightest and most favourably aligned systems, we visually derive estimates of the projected direction of motion based on the orientation of apparent compression shocks and debris trails. Our findings suggest that the onset of these events occurs primarily at large distances from the cluster core (>400 kpc), and that the trajectories of the affected galaxies feature high-impact parameters. Simple models show that such trajectories are highly improbable for galaxy infall along filaments but common for infall at high velocities, even after observational biases are accounted for, provided the duration of the resulting RPS events is ≲500 Myr. We thus tentatively conclude that extreme RPS events are preferentially triggered by cluster mergers, an interpretation that is supported by the disturbed dynamical state of many of the host clusters. This hypothesis implies that extreme RPS might occur also near the cores of merging poor clusters or even merging groups of galaxies. Finally, we present nine additional `jellyfish" galaxies at z > 0.3 discovered by us, thereby doubling the number of such systems known at intermediate redshift.

  1. Development and application of a coupled bio-geochmical and hydrological model for point and non-point source river water pollution

    Pohlert, T.

    2007-12-01

    The aim of this paper is to present recent developments of an integrated water- and N-balance model for the assessment of land use changes on water and N-fluxes for meso-scale river catchments. The semi-distributed water-balance model SWAT was coupled with algorithms of the bio-geochemical model DNDC as well as the model CropSyst. The new model that is further denoted as SWAT-N was tested with leaching data from a long- term lysimeter experiment as well as results from a 5-years sampling campaign that was conducted at the outlet of the meso-scale catchment of the River Dill (Germany). The model efficiency for N-load as well as the spatial representation of N-load along the river channel that was tested with results taken from longitudinal profiles show that the accuracy of the model has improved due to the integration of the aforementioned process-oriented models. After model development and model testing, SWAT-N was then used for the assessment of the EU agricultural policy (CAP reform) on land use change and consequent changes on N-fluxes within the Dill Catchment. giessen.de/geb/volltexte/2007/4531/

  2. Tyrosine hydroxylase in the ventral tegmental area of rams with high or low libido-A role for dopamine.

    Kramer, A C; Mirto, A J; Austin, K J; Roselli, C E; Alexander, B M

    2017-12-01

    Dopamine synthesis in the ventral tegmental area (VTA) is necessary for the reinforcement of sexual behavior. The objective of this study determined if sexual stimuli initiates reward, and whether reward is attenuated in sexually inactive rams. Sexually active rams were exposed to urine from estrous (n=4) or ovariectomized (n=3) ewes with inactive rams (n=3) exposed to urine from estrous ewes. Following exposure, rams were exsanguinated and brains perfused. Alternating sections of the VTA were stained for Fos related antigens (FRA), tyrosine hydroxylase, and dopamine beta-hydroxylase activity. Forebrain tissue, mid-sagittal ventral to the anterior corpus callosum, was stained for dopamine D 2 receptors. Concentrations of cortisol was determined prior to and following exposure. Exposure to ovariectomized-ewe urine in sexually active rams did not influence (P=0.6) FRA expression, but fewer (PSexually inactive rams had fewer (Psexually active rams following exposure to estrous ewe urine. VTA neurons staining positive for dopamine beta-hydroxylase did not differ by sexual activity (P=0.44) or urine exposure (P=0.07). Exposure to stimulus did not influence (P=0.46) numbers of forebrain neurons staining positive for dopamine D2 receptors in sexually active rams, but fewer (P=0.04) neurons stain positive in inactive rams. Serum concentrations of cortisol did not differ (P≥0.52) among rams prior to or following stimulus. In conclusion sexual inactivity is unlikely due to stress, but may be partially a result of decreased tyrosine hydroxylase and/or the response to dopamine. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Effects of Agricultural Byproducts in Ration on Productive and Reproductive Performance of Saidi Rams

    G. A. Megahed

    2006-01-01

    Full Text Available The influence of selected agricultural byproducts supplementation to feed rations on the ram's body gain, reproductive performance, and subsequent fertility were investigated. Forty Saidi rams were divided into 4 groups (n = 10. Group 1 (control was fed 500 g/head/day concentrate feed mixtures (CFM plus wheat straw ad libitum. Groups 2, 3 and 4 were fed 500 g/head/day CFM plus corn cobs or sugar cane tops or sugar cane bagasse (these roughages were treated with 1% urea, respectively. Serum testosterone, glucose and total cholesterol levels were determined and semen evaluations were carried out every 15 days. Testicular size, scrotal circumference and body weight were recorded each month. At the end of the experiment, 12 rams were allowed to mount 114 healthy ewes to evaluate the pregnancy rate for each group. The results have shown that the body weight, daily body gain, testicular size and scrotal circumference increased (p p p < 0.01 as compared with group 1 (1.76 ± 0.09 ng/ml. Moreover, supplementation of treated agricultural byproducts had a significant improving effects on the semen quality. The semen volume increased, along with individual motility and live sperm percentages. Pregnancy rate in this study indicated that rams of groups 2, 3 and 4 yielded a higher pregnancy rate (83.33%, 86.67% and 81.48%, respectively than group 1 (74.07%. Agricultural byproducts such as corn cobs, sugar cane tops and sugar cane bagasse treated with 1% urea had a beneficial effect on the daily body gain and improved the reproductive performance and subsequent fertility of Saidi rams, compared to wheat straw.

  4. Optical RAM row access using WDM-enabled all-passive row/column decoders

    Papaioannou, Sotirios; Alexoudi, Theoni; Kanellos, George T.; Miliou, Amalia; Pleros, Nikos

    2014-03-01

    Towards achieving a functional RAM organization that reaps the advantages offered by optical technology, a complete set of optical peripheral modules, namely the Row (RD) and Column Decoder (CD) units, is required. In this perspective, we demonstrate an all-passive 2×4 optical RAM RD with row access operation and subsequent all-passive column decoding to control the access of WDM-formatted words in optical RAM rows. The 2×4 RD exploits a WDM-formatted 2-bit-long memory WordLine address along with its complementary value, all of them encoded on four different wavelengths and broadcasted to all RAM rows. The RD relies on an all-passive wavelength-selective filtering matrix (λ-matrix) that ensures a logical `0' output only at the selected RAM row. Subsequently, the RD output of each row drives the respective SOA-MZI-based Row Access Gate (AG) to grant/block the entry of the incoming data words to the whole memory row. In case of a selected row, the data word exits the row AG and enters the respective CD that relies on an allpassive wavelength-selective Arrayed Waveguide Grating (AWG) for decoding the word bits into their individual columns. Both RD and CD procedures are carried out without requiring any active devices, assuming that the memory address and data word bits as well as their inverted values will be available in their optical form by the CPU interface. Proof-of-concept experimental verification exploiting cascaded pairs of AWGs as the λ-matrix is demonstrated at 10Gb/s, providing error-free operation with a peak power penalty lower than 0.2dB for all optical word channels.

  5. LES-based generation of high-frequency fluctuation in wind turbulence obtained by meteorological model

    Tamura, Tetsuro; Kawaguchi, Masaharu; Kawai, Hidenori; Tao, Tao

    2017-11-01

    The connection between a meso-scale model and a micro-scale large eddy simulation (LES) is significant to simulate the micro-scale meteorological problem such as strong convective events due to the typhoon or the tornado using LES. In these problems the mean velocity profiles and the mean wind directions change with time according to the movement of the typhoons or tornadoes. Although, a fine grid micro-scale LES could not be connected to a coarse grid meso-scale WRF directly. In LES when the grid is suddenly refined at the interface of nested grids which is normal to the mean advection the resolved shear stresses decrease due to the interpolation errors and the delay of the generation of smaller scale turbulence that can be resolved on the finer mesh. For the estimation of wind gust disaster the peak wind acting on buildings and structures has to be correctly predicted. In the case of meteorological model the velocity fluctuations have a tendency of diffusive variation without the high frequency component due to the numerically filtering effects. In order to predict the peak value of wind velocity with good accuracy, this paper proposes a LES-based method for generating the higher frequency components of velocity and temperature fields obtained by meteorological model.

  6. On the robustness of bucket brigade quantum RAM

    Arunachalam, Srinivasan; Gheorghiu, Vlad; Jochym-O'Connor, Tomas; Mosca, Michele; Varshinee Srinivasan, Priyaa

    2015-12-01

    We study the robustness of the bucket brigade quantum random access memory model introduced by Giovannetti et al (2008 Phys. Rev. Lett.100 160501). Due to a result of Regev and Schiff (ICALP ’08 733), we show that for a class of error models the error rate per gate in the bucket brigade quantum memory has to be of order o({2}-n/2) (where N={2}n is the size of the memory) whenever the memory is used as an oracle for the quantum searching problem. We conjecture that this is the case for any realistic error model that will be encountered in practice, and that for algorithms with super-polynomially many oracle queries the error rate must be super-polynomially small, which further motivates the need for quantum error correction. By contrast, for algorithms such as matrix inversion Harrow et al (2009 Phys. Rev. Lett.103 150502) or quantum machine learning Rebentrost et al (2014 Phys. Rev. Lett.113 130503) that only require a polynomial number of queries, the error rate only needs to be polynomially small and quantum error correction may not be required. We introduce a circuit model for the quantum bucket brigade architecture and argue that quantum error correction for the circuit causes the quantum bucket brigade architecture to lose its primary advantage of a small number of ‘active’ gates, since all components have to be actively error corrected.

  7. Growth performance and hematology of Djallonké rams fed haulms of four varieties of groundnut (Arachis hypogaea L.

    Terry Ansah

    2017-12-01

    Full Text Available The study was conducted to assess the chemical composition of the haulms of 4 dual-purpose groundnut (Arachis hypogaea L. varieties and their effects on the growth and hematology of Djallonké rams. The groundnut varieties were ICGV 97049 (Obolo, ICGX SM 87057 (Yenyawoso, RMP 12 (Azivivi and Manipinta. Rams (live weight 15.0 ± 3.0 kg were randomly assigned to 4 sole groundnut haulm meal (GHM treatments, with 4 rams each in an individual pen per treatment (total n = 16 rams. Samples of the groundnut haulms were milled and analyzed for crude protein (CP, neutral detergent fiber (NDF and acid detergent fiber (ADF. The CP concentration was higher (P  0.05 when the Djallonké rams were fed the haulms. However, significant differences were observed in final live weight and average daily live weight gain. Rams fed the Yenyawoso variety had higher (P < 0.05 final live weight and average daily live weight gain compared with those fed Obolo and Azivivi varieties. Consumption of any of the 4 varieties of groundnut haulms by Djallonké rams did not have any harmful effect on their red and white blood cell numbers and hemoglobin concentration. The study revealed that the different varieties of groundnut haulms differ in nutrient composition and also affect the growth performance of the rams. The Yenyawoso variety may be used as a sole diet for fattening Djallonké rams.

  8. Kinetic Monte-Carlo modeling of hydrogen retention and re-emission from Tore Supra deposits

    Rai, A.; Schneider, R.; Warrier, M.; Roubin, P.; Martin, C.; Richou, M.

    2009-01-01

    A multi-scale model has been developed to study the reactive-diffusive transport of hydrogen in porous graphite [A. Rai, R. Schneider, M. Warrier, J. Nucl. Mater. (submitted for publication). http://dx.doi.org/10.1016/j.jnucmat.2007.08.013.]. The deposits found on the leading edge of the neutralizer of Tore Supra are multi-scale in nature, consisting of micropores with typical size lower than 2 nm (∼11%), mesopores (∼5%) and macropores with a typical size more than 50 nm [C. Martin, M. Richou, W. Sakaily, B. Pegourie, C. Brosset, P. Roubin, J. Nucl. Mater. 363-365 (2007) 1251]. Kinetic Monte-Carlo (KMC) has been used to study the hydrogen transport at meso-scales. Recombination rate and the diffusion coefficient calculated at the meso-scale was used as an input to scale up and analyze the hydrogen transport at macro-scale. A combination of KMC and MCD (Monte-Carlo diffusion) method was used at macro-scales. Flux dependence of hydrogen recycling has been studied. The retention and re-emission analysis of the model has been extended to study the chemical erosion process based on the Kueppers-Hopf cycle [M. Wittmann, J. Kueppers, J. Nucl. Mater. 227 (1996) 186].

  9. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    Saleh, Mohamed Nasr

    2016-01-08

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  10. Micro-mechanics based damage mechanics for 3D Orthogonal Woven Composites: Experiment and Numerical Modelling

    Saleh, Mohamed Nasr; Lubineau, Gilles; Potluri, Prasad; Withers, Philip; Soutis, Constantinos

    2016-01-01

    Damage initiation and evolution of three-dimensional (3D) orthogonal woven carbon fibre composite (3DOWC) is investigated experimentally and numerically. Meso-scale homogenisation of the representative volume element (RVE) is utilised to predict the elastic properties, simulate damage initiation and evolution when loaded in tension. The effect of intra-yarns transverse cracking and shear diffused damage on the in-plane transverse modulus and shear modulus is investigated while one failure criterion is introduced to simulate the matrix damage. The proposed model is based on two major assumptions. First, the effect of the binder yarns, on the in-plane properties, is neglected, so the 3DOWC unit cell can be approximated as a (0o/90o) cross-ply laminate. Second, a micro-mechanics based damage approach is used at the meso-scale, so damage indicators can be correlated, explicitly, to the density of cracks within the material. Results from the simulated RVE are validated against experimental results along the warp (0o direction) and weft (90o direction). This approach paves the road for more predictive models as damage evolution laws are obtained from micro mechanical considerations and rely on few well-defined material parameters. This largely differs from classical damage mechanics approaches in which the evolution law is obtained by retrofitting experimental observations.

  11. Role of the GRAS transcription factor ATA/RAM1 in the transcriptional reprogramming of arbuscular mycorrhiza in Petunia hybrida

    Rich, Melanie K.; Courty, Pierre-Emmanuel; Roux, Christophe; Reinhardt, Didier

    2017-01-01

    Background Development of arbuscular mycorrhiza (AM) requires a fundamental reprogramming of root cells for symbiosis. This involves the induction of hundreds of genes in the host. A recently identified GRAS-type transcription factor in Petunia hybrida, ATA/RAM1, is required for the induction of host genes during AM, and for morphogenesis of the fungal endosymbiont. To better understand the role of RAM1 in symbiosis, we set out to identify all genes that depend on activation by RAM1 in mycorr...

  12. Identification of Spanish isolates of Rhizoctonia solani from potato by anastomosis grouping, ITS-RFLP and RAMS-fingerprinting

    A.M. Elbakali

    2003-08-01

    Full Text Available Anastomosis grouping, restriction fragment length polymorphism (RFLP of the ITS regions including the 5.85 rDNA, and random amplified microsatellites (RAMS were used to characterize isolates of Rhizoctonia solani collected from Spain and Finland. There was a high similarity between the results obtained with the three techniques. RAMS markers revealed more genetic variation among isolates of R. solani than RFLP. The anastomosis group (AG–3 isolates were clearly separated from isolates belonging to other AGs by RAMS, RFLPs and anastomosis grouping. Almost all the isolates sampled from potato belonged to AG–3. No differences were observed between Spanish and Finnish AG–3 isolates.

  13. Condições hidrográficas na plataforma continental ao largo de Ubatuba: variações sazonais e em média escala Hydrographic conditions on the continental shelf off Ubatuba: seasonal and meso-scale variability

    Belmiro Mendes de Castro Filho

    1987-01-01

    estruturas térmica e halina, tem provavelmente um importante papel na troca de massas de água entre a costa e o talude, contribuindo para o enriquecimento das águas da plataforma continental através dos movimentos ascendentes que ocorrem em seu núcleo.Hydrographic conditions on the continental shelf offshore of Ubatuba have shown different water mass distributions for summer (December, 1985 and winter (July, 1986. Two physical domains were identified: inner shelf and outer shelf, both separated by a front particularly well defined during the winter, The inner shelf has a two layer vertical stratification during summer, with a strong thermocline at mid-depths. During winter this region shows almost no stratification, During summer the upper layer (depths smaller than 20 m is filled with Coastal Water (CW, which interacts with Tropical Water (TW offshore. South Atlantic Central Water (SACA predominates in the lower layer during surrmer. Vertical interaction between CW and SACA is restricted to a band near the coast. During winter SACA does not penetrate towards the coast in the lower layer and, as a consequence, the inner shelf shows the presence of CW only. For winter interactions between CW and SACA are observed only across the front that separates inner and outer shelf. For this season there is also a noticeable intrusion of TW towards the coast on the upper layer of the outer shelf. A descriptive model for the wind driven seasonal circulation of the inner shelf is sugested, based on: 1 the water mass distributions observed and: 2 meteorological conditions from a coastal station located southward of Ubatuba, The outer shelf dynamics seems to suffer strong influence from the Brazil Current. Eddies or meanders with characteristics of frontal eddies, have been observed on both seasons on the outer shelf. These eddies should play an important role on the water mass exchange between the shelf and the slope, contributing for the enrichment of shelf waters by the upward

  14. MODERN METHODS OF DESIGN AND ARRANGEMENT OF RAMMING PILES IN PUNCHED HOLES

    ZOTSENKO N. L.

    2015-10-01

    Full Text Available Problem statement. Ramming piles in punched holes (RPPH differ of high degree of use of supporting capacity of base because of forming in it a compacted zone at the expense of displacement of soil in the volume rammer and compacted material of expansion. The method of their construction almost exclude excavation and formwork, reducing the consumption of concrete, metal, accelerates zero cycle compared to the foundations raised and excavation and immersion into the soil of precast elements. The expansion of the normative base, their design and construction should be for further implementation of of natural objects. The correctness of the geomechanical model of plane and spatial version of finite element method (FEM should be proved for the calculation of cooperative work of RPPH as part of grillages with base. The most effective kinds of equipment and technological schemes of construction of RPPH should be noticed. Conclusions. The paper presents the main regulations on the design and the arrangement RPPH, corresponding of construction norms of Ukraine. The results of experimental and theoretical studies conducted by the authors for over thirty years, and the experience of the use of these piles on the objects of civil engineering, industrial and agricultural construction made their base. The use of the elastoplastic model with the criterion of Mohr-Coulomb strength for designing of the system "grillage -RPPH- soil" was substantiated. The designing in plane and spatial problems of FEM is proved that in the distance between the axes of adjacent piles up to five diameters is a correct choice of a flat version and simplifying of calculating scheme to the conventional strip foundation. An improved. The method of calculating of RPPH as part of grillages ribbon, where as the width of the foundation was taken a diameter of the broadening of the pile, and the depth of its inception corresponds to the bottom of it. The supporting layer of base under the

  15. Santiago Ramón y Cajal and the Spanish school of neurology.

    Andres-Barquin, Pedro J

    2002-11-01

    Advances in neurology are now possible thanks to the endeavours of a few scientists who in the past laid firm foundations for the study of the nervous system. Santiago Ramón y Cajal (1852-1934) was one such pioneer of brain exploration and is acknowledged as the founder of modern neuroscience. He described the structure and organisation of virtually all parts of the nervous system and developed theories, including the neuron doctrine and the law of functional polarisation, that are the cornerstones of neuroscience. In addition to devoting his life to research, Ramón y Cajal was a dedicated teacher and mentor and created a school that greatly contributed to the flourishing of neurology.

  16. Doctor Ramón Luis Miranda Torres, su relación con las neurociencias

    Hodelín Tablada,Ricardo

    2005-01-01

    Objetivo: en el presente trabajo se reseña la relación del doctor Ramón Luis Miranda con las neurociencias, dirigido a destacar su inclinación por estas disciplinas. Desarrollo: conocido en la historiografía médica como el médico de José Martí el apóstol cubano el doctor Ramón Luis Miranda Torres, se destacó en otros aspectos poco divulgados, por lo que opinamos que no se le ha otorgado su verdadera dimensión. Nacido en la ciudad de Matanzas, Cuba, estudió medicina en Francia y desde sus años...

  17. An automatic analyzer of solid state nuclear track detectors using an optic RAM as image sensor

    Staderini, E.M.; Castellano, A.

    1986-01-01

    An optic RAM is a conventional digital random access read/write dynamic memory device featuring a quartz windowed package and memory cells regularly ordered on the chip. Such a device is used as an image sensor because each cell retains data stored in it for a time depending on the intensity of the light incident on the cell itself. The authors have developed a system which uses an optic RAM to acquire and digitize images from electrochemically etched CR39 solid state nuclear track detectors (SSNTD) in the track count rate up to 5000 cm -2 . On the digital image so obtained, a microprocessor, with appropriate software, performs image analysis, filtering, tracks counting and evaluation. (orig.)

  18. Purification of β-acetylglucosaminase and β-galactosidase from ram testis

    Caygill, J. C.; Roston, Christine P. J.; Jevons, F. R.

    1966-01-01

    1. The presence of β-galactosidase (EC 3.2.1.23) in an acetic acid extract of ram testis is reported. Some properties of the crude enzyme preparation were studied. 2. The purification of β-acetylglucosaminase (EC 3.2.1.30) and of β-galactosidase from the ram-testis extract by ammonium sulphate precipitation and chromatography on a CM-cellulose column is described. 3. The final purifications of the separated enzymes achieved were for the β-acetylglucosaminase 35 times and for the β-galactosidase 99 times. 4. The possibility of using DEAE-cellulose and Sephadex G-200 to purify the enzymes was investigated. PMID:5949569

  19. Molecular characterization of 93 genotypes of cocoa (Theobroma cacao L. with random amplified microsatellites RAMs

    Yacenia Morillo C.

    2014-12-01

    Full Text Available Random amplified microsatellite (RAMs markers six were used to characterize 93 genotypes of cocoa in Tumaco (Colombia. Hundred twenty seven bands were generated. The number of polymorphic loci varied between 11 and 25 for the AG and TG primers, respectively. This study differentiated the 93 genotypes into six groups with a 0.53 similarity, 0.28 mean heterozygosity (He for the population, and 0.12±0.02 genetic differentiation coefficient or Fst. A significant level of genetic diversity was evident in the T. cacao genotypes. This resource would benefit selection programs of individual trees or plant breeding programs. The genotypes clustered in a large proportion in accordance with the collection zone. This characteristic was associated with collection zones and along the rivers in the municipality of Tumaco. The RAM technique proved to be a useful tool for the determination of genetic diversity in Theobroma species.

  20. Microprocessor- and LSI-based CAMAC RAM controllers in a modular multiparameter instrumentation system

    Skarda, V.

    1982-01-01

    This contribution deals with the main features and with the hardware modifications of RAM controllers in the dual-port accessed CAMAC memory modules that have been applied in a modular multichannel analyzer instrumentation system. The modules described in this paper are fully compatible with the CAMAC standard EUR 4100 and with the COMPEX draft proposal of the ESONE Study Group, as well. Special attention is paid to the possible application of modern LSI bipolar circuits. (orig.)

  1. Cryopreservation of ram semen in extenders containing soybean lecithin as cryoprotectant and hyaluronic acid as antioxidant.

    Najafi, A; Najafi, M H; Zanganeh, Z; Sharafi, M; Martinez-Pastor, F; Adeldust, H

    2014-12-01

    A soybean lecithin-based extender supplemented with hyaluronic acid (HA) was assayed for effectiveness to improve the quality of frozen-thawed ram semen. HA has not been tested yet in an extender containing soybean lecithin for freezing ram semen. Thus, the aim of this study was to analyse the effects of soybean lecithin at 1% or 1.5% along with HA at 0, 0.5 and 1 mg ml(-1) in a Tris-based extender on the motion characteristics, membrane integrity (HOST), viability, GSH peroxidase (GSH-PX) activity, lipid peroxidation and acrosomal status after freezing-thawing. Semen was collected from four Mehraban rams during the breeding season and frozen in the six lecithin×HA extenders. The extender containing 1.5% lecithin supplemented with no HA yielded higher total motility (52.5%±1.6), viability (55.8%±1.6) and membrane integrity (44.5%±1.7), but the effects of the lecithin concentration did not reach signification. Linearity-related parameters, ALH, BCF, lipid peroxidation, GSH-PX activity, morphology and acrosomal status were not affected by the extender composition. In general, adding HA significantly decreased sperm velocity (1 mg ml(-1) HA), total motility (only with 1.5% lecithin), viability (1 mg ml(-1) HA for 1% lecithin; both concentrations for 1.5% lecithin) and membrane integrity. In conclusion, adding HA to the freezing extender supplemented with soybean lecithin failed to improve quality-related variables in ram semen. Increasing the lecithin content could have a positive effect, but further studies are needed. © 2014 Blackwell Verlag GmbH.

  2. Origin of the OFF state variability in ReRAM cells

    Salaoru, Iulia; Khiat, Ali; Li, Qingjiang; Prodromakis, Themistoklis; Berdan, Radu; Papavassiliou, Christos

    2014-01-01

    This work exploits the switching dynamics of nanoscale resistive random access memory (ReRAM) cells with particular emphasis on the origin of the observed variability when cells are consecutively cycled/programmed at distinct memory states. It is demonstrated that this variance is a common feature of all ReRAM elements and is ascribed to the formation and rupture of conductive filaments that expand across the active core, independently of the material employed as the active switching core, the causal physical switching mechanism, the switching mode (bipolar/unipolar) or even the unit cells' dimensions. Our hypothesis is supported through both experimental and theoretical studies on TiO 2 and In 2 O 3  : SnO 2 (ITO) based ReRAM cells programmed at three distinct resistive states. Our prototypes employed TiO 2 or ITO active cores over 5 × 5 µm 2 and 100 × 100 µm 2 cell areas, with all tested devices demonstrating both unipolar and bipolar switching modalities. In the case of TiO 2 -based cells, the underlying switching mechanism is based on the non-uniform displacement of ionic species that foster the formation of conductive filaments. On the other hand, the resistive switching observed in the ITO-based devices is considered to be due to a phase change mechanism. The selected experimental parameters allowed us to demonstrate that the observed programming variance is a common feature of all ReRAM devices, proving that its origin is dependent upon randomly oriented local disorders within the active core that have a substantial impact on the overall state variance, particularly for high-resistive states. (paper)

  3. A propósito de José Luis Brea: del archivo a la RAM

    Fernando Broncano

    2014-06-01

    Full Text Available The philosopher José Luis Brea proposes a notion of memory spread around a network of connections, which reveals a conception of culture based on a RAM structure and contrary to the culture of archive. The underwent changes in the classification of disciplines caused by individual’s attitudes deriving from the new media hyperconnectivity environment will be reviewed here and the relevance in the present humanities of concepts such as exile, frontier and question without answer.

  4. Steady state gamma testing of a 4K NMOS dynamic RAM

    Coleman, D.W.; Temkin, B.M.

    1976-01-01

    Samples of the Texas Instruments TMS4060JL, 4096 bit dynamic random-access memory (4K RAM) were tested in the ionizing environment of a 137 Ce source. Irradiated in an active condition, the devices were observed to fail at 1 x 10 3 rads (Si). Twenty-four hours after irradiation, 4 of the 5 devices tested were again functional. The devices were not powered and were at room temperature during the 24 hour anneal period

  5. Nano-Ionic Solid State Resistive Memories (Re-RAM): A Review.

    Sahoo, Satyajeet; Prabaharan, S R S

    2017-01-01

    Nano-ionic devices based on modest to fast ion conductors as active materials intrigued a revolution in the field of nano solid state resistive memories (the so-called Re-RAM) ever since HP labs unveiled the first solid state memristor device based on titanium dioxide (TiO2). This has brought impetus to the practical implementation of fourth missing element called “Memristor” correlating charge (q) and flux (φ) based on the conceptual thought by Chua in 1971 completing a missing gap between the passive electronic components (R, C and L). It depicts various functional features as memory element in terms of ionic charge transport in solid state by virtue of external electric flux variations. Consequently, a new avenue has been found by manipulating the ionic charge carriers creating a fast switching resistive random access memory (Re-RAM) or the so-called Memristors. The recent research has led to low power, faster switching speed, high endurance and high retention time devices that can be scaled down the order of few nanometers dimension and the 3D stacking is employed that significantly reduces the die area. This review is organized to provide the progress hitherto accomplished in the materials arena to make memristor devices with respect to current research attempts, different stack structures of ReRAM cells using various materials as well as the application of memristive system. Different synthesis approaches to make nano-ionic conducting metal oxides, the fabrication methods for ReRAM cells and its memory performance are reviewed comprehensively.

  6. Rammed earth walls strengthened with polyester fabric strips: Experimental analysis under in-plane cyclic loading

    Miccoli, L.; Müller, U.; Pospíšil, Stanislav

    2017-01-01

    Roč. 149, September (2017), s. 29-36 ISSN 0950-0618 R&D Projects: GA MŠk(CZ) LO1219 Keywords : rammed earth * pseudo-dynamic loads * shear-compression tests * strengthening * polyester fabric strips Subject RIV: JM - Building Engineering OBOR OECD: Construction engineering, Municipal and structural engineering Impact factor: 3.169, year: 2016 http://www.sciencedirect.com/science/article/pii/S0950061817310000

  7. A graphite based STT-RAM cell with reduction in switching current

    Varghani, Ali; Peiravi, Ali

    2015-01-01

    Spin Transfer Torque Random Access Memory (STT-RAM) is a serious candidate for “universal memory” because of its non-volatility, fast access time, high density, good scalability, high endurance and relatively low power dissipation. However, problems with low write speed and large write current are important existing challenges in STT-RAM design and there is a tradeoff between them and data retention time. In this study, a novel STT-RAM cell structure which uses perfect graphite based Magnetic Tunnel Junction (MTJ) is proposed. First, the cross-section of the structure is selected to be an ellipse of 45 nm and 180 nm dimensions and a six-layer graphite is used as tunnel barrier. By passing a lateral current with a short pulse width (before applying STT current and independent of it) through four middle graphene layers of the tunnel barrier, a 27% reduction in the amplitude of the switching current (for fast switching time of 2 ns) or a 58% reduction in its pulse width is achieved without any reduction in data retention time. Finally, the effect of downscaling of technology on the proposed structure is evaluated. A reduction of 31.6% and 9% in switching current is achieved for 90 and 22 nm cell width respectively by passing sufficient current (100 µA with 0.1 ns pulse width) through the tunnel barrier. Simulations are done using Object Oriented Micro Magnetic Framework (OOMMF). - Highlights: • A new STT-RAM cell structure which uses perfect graphite based MTJ is proposed. • The amplitude of the switching current or its pulsewidth can be reduced without any sacrifice of data retention time. • The proposed design is down-scalable from 90 nm to 22 nm. • Micromagnetic simulations are done with OOMMF

  8. Project and construction of a sequential counter with RAM chips random events

    Bertini, J.

    1985-01-01

    The project and construction of an electronic system to observe random events, which frequency is registered in successive time intervals with predetermined duration time are presented. The system was developed to study decay of radioactive nuclei with half lives is between 10 -6 s and 10 4 s. The chip MOS RAM - 2114 - 2 which is slow and cheap was used. The register time is twc=200ns. (M.C.K.) [pt

  9. Is prnt a pseudogene? Identification of ram Prt in testis and ejaculated spermatozoa.

    Jorge Pimenta

    Full Text Available A hallmark of prion diseases or transmissible spongiform encephalopaties is the conversion of the cellular prion protein (PrP(C, expressed by the prion gene (prnp, into an abnormally folded isoform (PrP(Sc with amyloid-like features that causes scrapie in sheep among other diseases. prnp together with prnd (which encodes a prion-like protein designated as Doppel, and prnt (that encodes the prion protein testis specific--Prt with sprn (shadow of prion protein gene, that encodes Shadoo or Sho genes, constitute the "prion gene complex". Whereas a role for prnd in the proper functioning of male reproductive system has been confirmed, the function of prnt, a recently discovered prion family gene, comprises a conundrum leading to the assumption that ruminant prnt is a pseudogene with no protein expression. The main objective of the present study was to identify Prt localization in the ram reproductive system and simultaneously to elucidate if ovine prnt gene is transcribed into protein-coding RNA. Moreover, as Prt is a prnp-related protein, the amyloid propensity was also tested for ovine and caprine Prt. Recombinant Prt was used to immunize BALB/c mice, and the anti-Prt polyclonal antibody (APPA immune response was evaluated by ELISA and Western Blot. When tested by indirect immunofluorescence, APPA showed high avidity to the ram sperm head apical ridge subdomain, before and after induced capacitation, but did not show the same behavior against goat spermatozoa, suggesting high antibody specificity against ovine-Prt. Prt was also found in the testis when assayed by immunohistochemistry during ram spermatogenesis, where spermatogonia, spermatocytes, spermatids and spermatozoa, stained positive. These observations strongly suggest ovine prnt to be a translated protein-coding gene, pointing to a role for Prt protein in the ram reproductive physiology. Besides, caprine Prt appears to exhibit a higher amyloid propensity than ovine Prt, mostly associated

  10. Incentives for use of inelastic analysis in RAM transport container design

    Ammerman, D.J.; Heinstein, M.W.

    1992-01-01

    The use of inelastic analysis methods instead of the traditional elastic analysis methods in the design of radioactive material (RAM) transport packagings leads to a better understanding of the response ofthe package to mechanical loadings. Thus, better assessment of the containment, thermal protection, and shielding integrity of the package after a structural accident event can be made. A more accurate prediction of the package response can lead to enhanced safety and also allow for a more efficient use of materials, possibly leading to a package with higher capacity and/or lower weight. This paper discusses the incentives for using inelastic analysis in the design of RAM shipping packages. Inelastic analysis provides an improved knowledge of the package behavior. It must be demonstrated that the use of inelastic analysis provides a better design to overcome the difficulties associated with this type of analysis. In this paper, comparisons between elastic and inelastic analyses are made to illustrate the differences in the two analysis techniques for two different types of packages. One is a package to transport a large quantity of RAM by rail with lead gamma shielding,and the other is a package to transport RAM by truck with depleteduranium gamma shielding. Analyses of the center-of-gravity-over-corner impacts will be compared for each package. The comparisons indicate thata package designed to just meet the elastic design criteria will actually undergo some yielding in the locations of highest stress. This results in two consequences in the predicted behavior of the cask. First,the overprediction of the stiffness of these yielded regions by theelastic analysis technique results in an underestimation of the stresses in other portions of the structure. Secondly, in an inelastic analysis, the yielding of a portion of a structure causes the force in thatregion to rise less rapidly than forces in adjacent regions

  11. System Verification Through Reliability, Availability, Maintainability (RAM) Analysis & Technology Readiness Levels (TRLs)

    Emmanuel Ohene Opare, Jr.; Charles V. Park

    2011-06-01

    The Next Generation Nuclear Plant (NGNP) Project, managed by the Idaho National Laboratory (INL), is authored by the Energy Policy Act of 2005, to research, develop, design, construct, and operate a prototype fourth generation nuclear reactor to meet the needs of the 21st Century. A section in this document proposes that the NGNP will provide heat for process heat applications. As with all large projects developing and deploying new technologies, the NGNP is expected to meet high performance and availability targets relative to current state of the art systems and technology. One requirement for the NGNP is to provide heat for the generation of hydrogen for large scale productions and this process heat application is required to be at least 90% or more available relative to other technologies currently on the market. To reach this goal, a RAM Roadmap was developed highlighting the actions to be taken to ensure that various milestones in system development and maturation concurrently meet required availability requirements. Integral to the RAM Roadmap was the use of a RAM analytical/simulation tool which was used to estimate the availability of the system when deployed based on current design configuration and the maturation level of the system.

  12. Androgen radioimmunoassay in the ram: results of direct plasma testosterone and dehydroepiandrosterone measurement and physiological evaluation

    Garnier, D.-H.; Cotta, Y.; Terqui, M.

    1978-01-01

    Different radioimmunoassays of testosterone (T) dehydroepiandrosterone (DHA) and 5 α-dihydrotestosterone (5 α-DHT) were investigated for ram plasma. Specificity of the antisera, lack of noticeable binding in plasma, very low levels of other androgens allow direct plasma RIA for DHA and T by the double antibody technique. The levels obtained by this simplified method are in agreement with those found after extraction alone, after extraction and celite chromatography and after quantification with a completely different technique such as gas chromatography. The within assay variabilities for T and DHA were 4.7 p. 100 and 4.6 p. 100 respectively but vary with the level of steroid in plasma. The inter assay variabilities of T were 9.5 p. 100 and 3.2 p. 100 for 1.5 and 11.6 ng/ml of plasma respectively. The antiserum for 5 α-DHT have a specificity such that, even after celite chromatography some androgens (5 β-DHT) may interfere. However determinations of 5 α/5 β-DHT amounts are possible. The physiological validations of direct plasma T and DHA RIA were studied in various conditions. The DHA plasma variations are similar to those of T in Ram from birth to puberty, but the levels are lower. DHA plasma levels show a seasonal variation as does testosterone. Variations within 24 hrs of these two androgens were in synchrony. The direct plasma T and DHA assays are useful and inexpensive tools to characterize ram testicular function

  13. Developing Criteria for Lumbar Spine Magnetic Resonance Imaging (MRI) Using RAND Appropriateness Method (RAM)

    Keshtkaran, Ali; Bagheri, Mohammad Hadi; Ostovar, Rahim; Salari, Hedayat; Farokhi, Majid Reza; Esfandiari, Atefeh; Yousefimanesh, Hossein

    2012-01-01

    Studies show that a large proportion of healthcare offered may be inappropriate or unnecessary. Magnetic resonance imaging (MRI) is a new and expensive diagnostic technology which has been increasingly used all over the world. Moreover, this trend has been more rapidly increasing in Iran. Low back pain is a common disorder all over the world and MRI technique is one of the several ways to assess its cause. The present study aims to develop scenarios for lumbar spine MRI. In the present study, the RAND Appropriateness Method (RAM) was used in order to reach consensus regarding developing scenarios for lumbar spine MRI. We generated scenarios from valid clinical guidelines as well as the experts’ opinion. The panel members included nine specialists from various medical specialties that had scored scenarios in two rounds, the first of which was without interaction, while the second one was with interaction. We extracted 97 scenarios for the lumbar spine MRI in the scenario extracting phase of the study and the panel members added 18 scenarios. After implementation of two rounds, the scenarios were categorized into three ranges. Sixty seven (58%) of the scenarios were considered as appropriate, 45 (39%) as uncertain, and three (2.6%) as inappropriate. RAM is useful for identifying stakeholder views in settings with limited resources. Since RAM has precise instructions for consensus developing, a large number of scenarios were considered as uncertain. Therefore, more research has to be conducted on the issue

  14. Discovery of Ram-pressure Stripped Gas around an Elliptical Galaxy in Abell 2670

    Sheen, Yun-Kyeong; Kim, Minjin; Smith, Rory; Yi, Sukyoung K.; Jaffé, Yara; Duc, Pierre-Alain; Nantais, Julie; Candlish, Graeme; Demarco, Ricardo; Treister, Ezequiel

    2017-01-01

    Studies of cluster galaxies are increasingly finding galaxies with spectacular one-sided tails of gas and young stars, suggestive of intense ram-pressure stripping. These so-called “jellyfish” galaxies typically have late-type morphology. In this paper, we present Multi Unit Spectroscopic Explorer (MUSE) observations of an elliptical galaxy in Abell 2670 with long tails of material visible in the optical spectra, as well as blobs with tadpole-like morphology. The spectra in the central part of the galaxy reveal a stellar component as well as ionized gas. The stellar component does not have significant rotation, while the ionized gas defines a clear star-forming gas disk. We argue, based on deep optical images of the galaxy, that the gas was most likely acquired during a past wet merger. It is possible that the star-forming blobs are also remnants of the merger. In addition, the direction and kinematics of the one-sided ionized tails, combined with the tadpole morphology of the star-forming blobs, strongly suggests that the system is undergoing ram pressure from the intracluster medium. In summary, this paper presents the discovery of a post-merger elliptical galaxy undergoing ram-pressure stripping.

  15. The effect of reactive ion etch (RIE) process conditions on ReRAM device performance

    Beckmann, K.; Holt, J.; Olin-Ammentorp, W.; Alamgir, Z.; Van Nostrand, J.; Cady, N. C.

    2017-09-01

    The recent surge of research on resistive random access memory (ReRAM) devices has resulted in a wealth of different materials and fabrication approaches. In this work, we describe the performance implications of utilizing a reactive ion etch (RIE) based process to fabricate HfO2 based ReRAM devices, versus a more unconventional shadow mask fabrication approach. The work is the result of an effort to increase device yield and reduce individual device size. Our results show that choice of RIE etch gas (SF6 versus CF4) is critical for defining the post-etch device profile (cross-section), and for tuning the removal of metal layers used as bottom electrodes in the ReRAM device stack. We have shown that etch conditions leading to a tapered profile for the device stack cause poor electrical performance, likely due to metal re-deposition during etching, and damage to the switching layer. These devices exhibit nonlinear I-V during the low resistive state, but this could be improved to linear behavior once a near-vertical etch profile was achieved. Device stacks with vertical etch profiles also showed an increase in forming voltage, reduced switching variability and increased endurance.

  16. An energy and cost efficient majority-based RAM cell in quantum-dot cellular automata

    Khosroshahy, Milad Bagherian; Moaiyeri, Mohammad Hossein; Navi, Keivan; Bagherzadeh, Nader

    Nanotechnologies, notably quantum-dot cellular automata, have achieved major attentions for their prominent features as compared to the conventional CMOS circuitry. Quantum-dot cellular automata, particularly owning to its considerable reduction in size, high switching speed and ultra-low energy consumption, is considered as a potential alternative for the CMOS technology. As the memory unit is one of the most essential components in a digital system, designing a well-optimized QCA random access memory (RAM) cell is an important area of research. In this paper, a new five-input majority gate is presented which is suitable for implementing efficient single-layer QCA circuits. In addition, a new RAM cell with set and reset capabilities is designed based on the proposed majority gate, which has an efficient and low-energy structure. The functionality, performance and energy consumption of the proposed designs are evaluated based on the QCADesigner and QCAPro tools. According to the simulation results, the proposed RAM design leads to on average 38% lower total energy dissipation, 25% smaller area, 20% lower cell count, 28% lower delay and 60% lower QCA cost as compared to its previous counterparts.

  17. Low-power non-volatile spintronic memory: STT-RAM and beyond

    Wang, K L; Alzate, J G; Khalili Amiri, P

    2013-01-01

    The quest for novel low-dissipation devices is one of the most critical for the future of semiconductor technology and nano-systems. The development of a low-power, universal memory will enable a new paradigm of non-volatile computation. Here we consider STT-RAM as one of the emerging candidates for low-power non-volatile memory. We show different configurations for STT memory and demonstrate strategies to optimize key performance parameters such as switching current and energy. The energy and scaling limits of STT-RAM are discussed, leading us to argue that alternative writing mechanisms may be required to achieve ultralow power dissipation, a necessary condition for direct integration with CMOS at the gate level for non-volatile logic purposes. As an example, we discuss the use of the giant spin Hall effect as a possible alternative to induce magnetization reversal in magnetic tunnel junctions using pure spin currents. Further, we concentrate on magnetoelectric effects, where electric fields are used instead of spin-polarized currents to manipulate the nanomagnets, as another candidate solution to address the challenges of energy efficiency and density. The possibility of an electric-field-controlled magnetoelectric RAM as a promising candidate for ultralow-power non-volatile memory is discussed in the light of experimental data demonstrating voltage-induced switching of the magnetization and reorientation of the magnetic easy axis by electric fields in nanomagnets. (paper)

  18. A graphite based STT-RAM cell with reduction in switching current

    Varghani, Ali; Peiravi, Ali

    2015-10-01

    Spin Transfer Torque Random Access Memory (STT-RAM) is a serious candidate for "universal memory" because of its non-volatility, fast access time, high density, good scalability, high endurance and relatively low power dissipation. However, problems with low write speed and large write current are important existing challenges in STT-RAM design and there is a tradeoff between them and data retention time. In this study, a novel STT-RAM cell structure which uses perfect graphite based Magnetic Tunnel Junction (MTJ) is proposed. First, the cross-section of the structure is selected to be an ellipse of 45 nm and 180 nm dimensions and a six-layer graphite is used as tunnel barrier. By passing a lateral current with a short pulse width (before applying STT current and independent of it) through four middle graphene layers of the tunnel barrier, a 27% reduction in the amplitude of the switching current (for fast switching time of 2 ns) or a 58% reduction in its pulse width is achieved without any reduction in data retention time. Finally, the effect of downscaling of technology on the proposed structure is evaluated. A reduction of 31.6% and 9% in switching current is achieved for 90 and 22 nm cell width respectively by passing sufficient current (100 μA with 0.1 ns pulse width) through the tunnel barrier. Simulations are done using Object Oriented Micro Magnetic Framework (OOMMF).

  19. The Effects of Ram Pressure on the Cold Clouds in the Centers of Galaxy Clusters

    Li, Yuan; Ruszkowski, Mateusz; Tremblay, Grant

    2018-02-01

    We discuss the effect of ram pressure on the cold clouds in the centers of cool-core galaxy clusters, and in particular, how it reduces cloud velocity and sometimes causes an offset between the cold gas and young stars. The velocities of the molecular gas in both observations and our simulations fall in the range of 100–400 km s‑1, which is much lower than expected if they fall from a few tens of kiloparsecs ballistically. If the intracluster medium (ICM) is at rest, the ram pressure of the ICM only slightly reduces the velocity of the clouds. When we assume that the clouds are actually “fluffier” because they are co-moving with a warm-hot layer, the velocity becomes smaller. If we also consider the active galactic nucleus wind in the cluster center by adding a wind profile measured from the simulation, the clouds are further slowed down at small radii, and the resulting velocities are in general agreement with the observations and simulations. Because ram pressure only affects gas but not stars, it can cause a separation between a filament and young stars that formed in the filament as they move through the ICM together. This separation has been observed in Perseus and also exists in our simulations. We show that the star-filament offset, combined with line-of-sight velocity measurements, can help determine the true motion of the cold gas, and thus distinguish between inflows and outflows.

  20. Effect of Freezing on Spermatozoa from Tigaie Rams Belonging to the Mountain Ecotype

    Vasile Miclea

    2011-05-01

    Full Text Available Our aim was to study the influence of freezing on the viability and frequency of abnormalities in frozen ram spermatozoa. Sperm was collected form 20 rams belonging to the mountain ecotype of the Tigaie breed using the artificial vagina technique and volume and motility were assessed. Afterward it was diluted with Tryladil (1:4 supplemented with 20% egg yolk and heated at 37°C. Subsequently the temperature decreased at a rate of 0.2°C/minute until reaching 4°C and an equilibration time of 2 hours followed. During this time the diluted sperm was packaged in 0.25 ml straws. After sealing these were kept 6 cm above liquid nitrogen level for 13 minutes (- 120°C and then plunged into nitrogen. Volume, motility and concentration were assessed before freezing. After thawing sperm morphology was assessed using Hancock’s method and at the same time the endurance (at 10, 30 and 60 minutes and HOST tests were performed. The highest motility (0.40 was graded at 30 minutes. It could be correlated with the increased percentage of HOST positive spermatozoa, 27.78%. The percentage of abnormal spermatozoa was also high (47.89%, 38.44% of them having acrosome flaws. Cryopreservation has a negative effect on the characteristics of sperm cells from Tigaie rams belonging to the mountain ecotype.

  1. A Ramón Valdés, In Memoriam.

    Joan Prat

    2012-06-01

    Full Text Available I. Cuando Verena Stolcke y poco después Aurelio Díaz me invitaron a participar en este acto de homenaje y memoria a Ramón Valdés del Toro pensé, en primer lugar,que prepararía algo sobre el papel de Ramón en los inicios de la Antropología española.Comencé a escribirlo pero resultaba un texto demasiado erudito, aburrido y difícil de digerir. En esta situación de stand by agradecí un correo electrónico de Verena en el que se nos instaba a “intervenir a vuestro aire en torno a vuestros recuerdos personales del magisterio y de la obra de Ramón”. Respiré aliviado ya que esto me resultaba mucho más cómodo y gratificante. En las líneas que siguen no he dedicado mucho esfuerzo a disimular el tono coloquial que tuvo la intervención oral.

  2. Discovery of Ram-pressure Stripped Gas around an Elliptical Galaxy in Abell 2670

    Sheen, Yun-Kyeong; Kim, Minjin [Korea Astronomy and Space Science Institute, 776, Daedeokdae-ro, Yuseong-gu, Daejeon, 34055 (Korea, Republic of); Smith, Rory; Yi, Sukyoung K. [Department of Astronomy, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul, 03722 (Korea, Republic of); Jaffé, Yara [European Southern Observatory, Alonso de Cordova 3107, Vitacura, Casilla 19001, Santiago de Chile (Chile); Duc, Pierre-Alain [Laboratoire AIM Paris-Saclay, CEA/Irfu/SAp CNRS Universite Paris Diderot, F-91191 Gif-sur-Yvette Cedex (France); Nantais, Julie [Departamento de Ciencias Físicas, Universidad Andres Bello, Fernandez Concha 700, 7591538 Las Condes, Santiago (Chile); Candlish, Graeme [Instituto de Física y Astronomía, Universidad de Valparaíso, Gran Bretaña 1111, Valparaíso (Chile); Demarco, Ricardo [Departamento de Astronomía, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Treister, Ezequiel, E-mail: yksheen@kasi.re.kr [Instituto de Astrofísica, Facultad de Física, Pontificia Universidad Católica de Chile, Casilla 306, Santiago (Chile)

    2017-05-01

    Studies of cluster galaxies are increasingly finding galaxies with spectacular one-sided tails of gas and young stars, suggestive of intense ram-pressure stripping. These so-called “jellyfish” galaxies typically have late-type morphology. In this paper, we present Multi Unit Spectroscopic Explorer (MUSE) observations of an elliptical galaxy in Abell 2670 with long tails of material visible in the optical spectra, as well as blobs with tadpole-like morphology. The spectra in the central part of the galaxy reveal a stellar component as well as ionized gas. The stellar component does not have significant rotation, while the ionized gas defines a clear star-forming gas disk. We argue, based on deep optical images of the galaxy, that the gas was most likely acquired during a past wet merger. It is possible that the star-forming blobs are also remnants of the merger. In addition, the direction and kinematics of the one-sided ionized tails, combined with the tadpole morphology of the star-forming blobs, strongly suggests that the system is undergoing ram pressure from the intracluster medium. In summary, this paper presents the discovery of a post-merger elliptical galaxy undergoing ram-pressure stripping.

  3. Quality assurance requirements in the testing of packages to be used for safe transportation of RAM

    Vieru, Gheorghe; Nistor, Viorica; Mihaiu, Ramona

    2010-01-01

    The quality of the Type A, B or C packages used for transport and storage of Radioactive Material (RAM) has to be proved by performing qualification tests in accordance with the Transport Regulations, within the Reliability and Testing Laboratory, Institute for Nuclear Research (INR) Pitesti, where has designed and developed a new Romanian Testing Facility. The qualifications testing are performed under a strict quality assurance programme based on the specific procedures prior approved by the Romanian Nuclear Regulatory Body CNCAN (National Commission for Nuclear Activity Control). This paper describe the quality assurance programme in accordance with the quality management system developed in order to meet the requirements provided by the national regulations as well as to the requirements of the IAEA's safety standard TS-R-1 related to testing of packages to be used for transport of RAM and also provides an overview of the new Romanian Testing Facilities for RAM Packages, developed by the INR's Reliability and Testing Laboratory within an Excellence Scientific Contract. (authors)

  4. PROPOSAL FOR BUILD A TEST STAND TO THE STUDY WATER RAM BASED ON THE RECOMMENDATIONS CONSTRUCTION

    Dariusz GRYGO

    2016-05-01

    Full Text Available The main aim of this article was developed of a test stand to a study physics phenomena accruing at work in a ram water based on the construction recommendations. The experience gained by a number of attempts allowed to the developed construction recommendations that allowed to adjust the test stand to perform various studies of physics phenomena occurring at the work of water ram and easy adaptions to the new requirements. The article includes: the review of the test stands on which performed the study in the history and in the present times, description of the construction recommendations of the universal test stand and the proposal of the test stand developed based on the construction recommendations. Motivation to take up this issue follows from the interest of devices that work in an unconventional way, devices used a renewable energy that can be used in household e.g. to improve their energy balance, delivery water to houses, drinking water for animals, fields irrigation, etc. Analysis of the literature of the water ram, test stands and their performance shown that it is small and typically old development in popular science form. In times of intensive search new sources of renewable energy reactivation of this type equipment may be highly probable.

  5. Interaction of milk proteins and Binder of Sperm (BSP) proteins from boar, stallion and ram semen.

    Plante, Geneviève; Lusignan, Marie-France; Lafleur, Michel; Manjunath, Puttaswamy

    2015-08-15

    Mammalian semen contains a family of closely related proteins known as Binder of SPerm (BSP proteins) that are added to sperm at ejaculation. BSP proteins extract lipids from the sperm membrane thereby extensively modifying its composition. These changes can ultimately be detrimental to sperm storage. We have demonstrated that bovine BSP proteins interact with major milk proteins and proposed that this interaction could be the basis of sperm protection by milk extenders. In the present study, we investigated if homologous BSP proteins present in boar, stallion and ram seminal plasma display a similar affinity for the milk proteins in order to assess whether the mechanism of sperm protection by milk for these species could be general. Skim milk was incubated with seminal plasma proteins (boar, stallion and ram), chromatographed on a Sepharose CL-4B column and protein fractions were analyzed by immunoblotting. Boar, stallion and ram BSP proteins displayed affinity for a milk protein fraction (F1) mainly composed of α-lactalbumin, β-lactoglobulin, and κ-casein. They also had affinity for another milk protein fraction (F2) composed mostly of casein micelles. However, stallion BSP showed higher affinity for the fraction (F1). These results further extend our view that the association of BSP proteins with milk proteins could be a general feature of the mechanism of mammalian sperm protection by milk to prevent detrimental effect of prolonged exposure of sperm to seminal plasma.

  6. Position sensitive regions in a generic radiation sensor based on single event upsets in dynamic RAMs

    Darambara, D.G.; Spyrou, N.M.

    1997-01-01

    Modern integrated circuits are highly complex systems and, as such, are susceptible to occasional failures. Semiconductor memory devices, particularly dynamic random access memories (dRAMs), are subject to random, transient single event upsets (SEUs) created by energetic ionizing radiation. These radiation-induced soft failures in the stored data of silicon based memory chips provide the foundation for a new, highly efficient, low cost generic radiation sensor. The susceptibility and the detection efficiency of a given dRAM device to SEUs is a complicated function of the circuit design and geometry, the operating conditions and the physics of the charge collection mechanisms involved. Typically, soft error rates measure the cumulative response of all sensitive regions of the memory by broad area chip exposure in ionizing radiation environments. However, this study shows that many regions of a dynamic memory are competing charge collection centres having different upset thresholds. The contribution to soft fails from discrete regions or individual circuit elements of the memory device is unambiguously separated. Hence the use of the dRAM as a position sensitive radiation detector, with high spatial resolution, is assessed and demonstrated. (orig.)

  7. Meso-scale atmospheric events promote phytoplankton blooms in the coastal Bay of Bengal

    Maneesha, K.; Sarma, V.V.S.S.; Reddy, N.P.C.; Sadhuram, Y.; Murty, T.V.R.; Sarma, V.V.; DileepKumar, M.

    mixing does not cool SST in the post monsoon north Bay of Bengal; Atmos. Sci. Letts. 9 1–6. Senjyu T and Watanabe T 1999 A sudden temperature decrease along the Sanin coast induced by a typhoon; Umi to Sora 75 1–8 (in Japanese with English abstract...

  8. The diffusion of radioactive gases in the meso-scale (20 km-400 km)

    Wippermann, F.

    1974-01-01

    The term ''Mesoscale'' refers to distances between 20 km and 400 km from the source; in defining this range, the structure of atmospheric turbulence is taken into account. To arrive at an evaluation of diffusion in the mesoscale, quantitative methods from the microscale (source distance 400 km) are extrapolated into the mesoscale. In the first case a table is given to read off the minimum factor by which the concentration is reduced in the mesoscale as the source distance increases to obtain the diffusion for the worst possible case, the existence of a mixing-layer topped by a temperature inversion, was assumed. For this it was essential, first of all, to determine the source distance xsub(D) beyond which the diffusing gases are completely mixed within the mixing-layer of thickness D. To make allowance for all possible thicknesses of this mixing-layer, a measurement carried out at ground level at only 10 km from the source can be used to calculate the correct concentrations in the mixing-layer; the dilution factors will then be related to this value. Possible ways of an improved incorporation of certain factors in the diffusion estimate, such as the topography of the earth's surface, the roughness of terrain, the vertical profiles of wind and exchange coefficients and the effects of non-stability are given in the last section

  9. Investigation of porous concrete through macro and meso-scale testing

    Agar Ozbek, A.S.; Weerheijm, J.; Schlangen, H.E.J.G.

    2010-01-01

    In designing a porous concrete, containing a high volume of air pores, the effects of its mesoscale phases on its macro level properties have to be known. For this purpose, porous concretes having different aggregate gradings and cement paste compositions were investigated through macro-scale

  10. Generic framework for meso-scale assessment of climate change hazards in coastal environments

    Appelquist, Lars Rosendahl

    2013-01-01

    coastal environments worldwide through a specially designed coastal classification system containing 113 generic coastal types. The framework provides information on the degree to which key climate change hazards are inherent in a particular coastal environment, and covers the hazards of ecosystem......This paper presents a generic framework for assessing inherent climate change hazards in coastal environments through a combined coastal classification and hazard evaluation system. The framework is developed to be used at scales relevant for regional and national planning and aims to cover all...... and computing requirements, allowing for application in developing country settings. It is presented as a graphical tool—the Coastal Hazard Wheel—to ease its application for planning purposes....

  11. Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy.

    Hirsch, M; Catchpole-Smith, S; Patel, R; Marrow, P; Li, Wenqi; Tuck, C; Sharples, S D; Clare, A T

    2017-09-01

    Developments in additive manufacturing technology are serving to expand the potential applications. Critical developments are required in the supporting areas of measurement and in process inspection to achieve this. CM247LC is a nickel superalloy that is of interest for use in aerospace and civil power plants. However, it is difficult to process via selective laser melting (SLM) as it suffers from cracking during rapid cooling and solidification. This limits the viability of CM247LC parts created using SLM. To quantify part integrity, spatially resolved acoustic spectroscopy (SRAS) has been identified as a viable non-destructive evaluation technique. In this study, a combination of optical microscopy and SRAS was used to identify and classify the surface defects present in SLM-produced parts. By analysing the datasets and scan trajectories, it is possible to correlate morphological information with process parameters. Image processing was used to quantify porosity and cracking for bulk density measurement. Analysis of surface acoustic wave data showed that an error in manufacture in the form of an overscan occurred. Comparing areas affected by overscan with a bulk material, a change in defect density from 1.17% in the bulk material to 5.32% in the overscan regions was observed, highlighting the need to reduce overscan areas in manufacture.

  12. Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy

    Hirsch, M.; Catchpole-Smith, S.; Patel, R.; Marrow, P.; Li, Wenqi; Tuck, C.; Sharples, S. D.; Clare, A. T.

    2017-09-01

    Developments in additive manufacturing technology are serving to expand the potential applications. Critical developments are required in the supporting areas of measurement and in process inspection to achieve this. CM247LC is a nickel superalloy that is of interest for use in aerospace and civil power plants. However, it is difficult to process via selective laser melting (SLM) as it suffers from cracking during rapid cooling and solidification. This limits the viability of CM247LC parts created using SLM. To quantify part integrity, spatially resolved acoustic spectroscopy (SRAS) has been identified as a viable non-destructive evaluation technique. In this study, a combination of optical microscopy and SRAS was used to identify and classify the surface defects present in SLM-produced parts. By analysing the datasets and scan trajectories, it is possible to correlate morphological information with process parameters. Image processing was used to quantify porosity and cracking for bulk density measurement. Analysis of surface acoustic wave data showed that an error in manufacture in the form of an overscan occurred. Comparing areas affected by overscan with a bulk material, a change in defect density from 1.17% in the bulk material to 5.32% in the overscan regions was observed, highlighting the need to reduce overscan areas in manufacture.

  13. Thermal Upgrading of 9977 Radioactive Material (Ram) Type B Package

    Gupta, N.; Abramczyk, G.

    2012-01-01

    The 9977 package is a radioactive material package that was originally certified to ship Heat Sources and RTG contents up to 19 watts and it is now being reviewed to significantly expand its contents in support of additional DOE missions. Thermal upgrading will be accomplished by employing stacked 3013 containers, a 3013 aluminum spacer and an external aluminum sleeve for enhanced heat transfer. The 7th Addendum to the original 9977 package Safety Basis Report describing these modifications is under review for the DOE certification. The analyses described in this paper show that this well-designed and conservatively analyzed package can be upgraded to carry contents with decay heat up to 38 watts with some simple design modifications. The Model 9977 package has been designed as a replacement for the Department of Transportation (DOT) Fissile Specification 6M package. The 9977 package is a very versatile Type B package which is certified to transport and store a wide spectrum of radioactive materials. The package was analyzed quite conservatively to increase its usefulness and store different payload configurations. Its versatility is evident from several daughter packages such as the 9978 and H1700, and several addendums where the payloads have been modified to suit the Shipper's needs without additional testing.

  14. Un discurso de Ramón y Cajal sobre El Quijote

    González Quirós, José Luis

    2006-04-01

    Full Text Available The article is a brief study to a lecture by Santiago Ramon y Cajal, entitled Psichology of Don Quixote and Quixotism. It is a rather unknown text, as well as one of the main works regarding the topic produced at the time of the 3rd centennary of Don Quixote. The lecture was commissioned by the Medical College of San Carlos, and was read on May 9th, 1905. The existing editions contain quite a few printing errors. Our analysis sets out Cajal’s ideas regarding the situation of Spanish science and the necessary measures that need to be taken. We also put these ideas in comparison with those of Unamuno and Ortega, the two main Spanish authors to write about the same topic in the same years. We emphasize the agreement between Unamuno and Cajal, as well as the radical difference we can find between Ortega’s and Cajal’s approaches to the subject of science.El artículo es un breve análisis del discurso de Santiago Ramón y Cajal titulado Psicología de Don Quijote y el quijotismo, un texto poco conocido que fue una de las piezas principales producida en torno al tema con motivo del III centenario del Quijote. El discurso de Ramón y Cajal le fue encargado por el Colegio Médico de San Carlos, y se pronunció en Madrid el día 9 de Mayo de 1905. Las ediciones existentes contienen algunas erratas e inexactitudes. Nuestro análisis expone las ideas de Ramón y Cajal en relación con la situación de la ciencia española y con los remedios que es necesario poner en práctica y con el espíritu que debe animarlos para poner luego en relación las ideas de Ramón y Cajal con las de Unamuno y Ortega, los dos principales autores españoles que escribieron sobre el tema en aquellos mismos años, subrayando la coincidencia entre Unamuno y Ramón y Cajal y la llamativa distancia de Ortega con las ideas de nuestro histólogo en relación con la ciencia.

  15. Variabilidad genética de Hartón del Valle mediante RAM Genetic variability of Harton del Valle by RAM

    Ana M Piedrahíta

    2008-01-01

    Full Text Available El Hartón del Valle (HV hace parte de las siete razas criollas de ganado bovino colombiano y de acuerdo con los criterios de la FAO está considerado como vulnerable. Para estudiar su variabilidad genética fueron muestreados 33 individuos HV y tres animales de la raza Holstein, como control externo. Se extrajo ADN utilizando el método de Salting Out y las muestras fueron analizadas mediante la técnica molecular RAM (Randon amplified microsatellites. Se utilizaron los cebadores CGA, CCA, TG, y CT. El valor promedio de heterocigosidad esperada fue de 0.26 y el F ST fue 0.39 ± 0.03. Con el índice de Dice-Nei Li y agrupando con el método UPGMA se distinguieron dos grupos: uno integrado por dos hatos de conservación y el otro por cuatro fincas que han compartido reproductores.Harton del Valle (HV breed belong to the seven Creole breeds of the Colombian bovine livestock, according to FAO criteria it is considered as vulnerable. To study its genetical variability, 33 HV animals and three and 3 animals of Holstein breed as a external control were sampled. Simples of DNA were isolated using the Salting Out method and RAM (Random amplified microsatellites technique was used. CGA, CCA, TG and CT primers were used. The mean value of expected heterocigozity was 0.26 and F ST fue 0.39 ± 0.03. Using Dice-Nei Li index and UPGMA clustering method, two groups were distinguished: the first one integrated for two conservation herds and other one by tour faros that have been sharing breeding bulls.

  16. Ram booster

    Brand, Vance D. (Inventor); Morgan, Walter Ray (Inventor)

    2011-01-01

    The present invention is a space launch system and method to propel a payload bearing craft into earth orbit. The invention has two, or preferably, three stages. The upper stage has rocket engines capable of carrying a payload to orbit and provides the capability of releasably attaching to the lower, or preferably, middle stage. Similar to the lower stage, the middle stage is a reusable booster stage that employs all air breathing engines, is recoverable, and can be turned-around in a short time between missions.

  17. GAS DEPLETION IN LOCAL GROUP DWARFS ON ∼250 kpc SCALES: RAM PRESSURE STRIPPING ASSISTED BY INTERNAL HEATING AT EARLY TIMES

    Nichols, Matthew; Bland-Hawthorn, Joss

    2011-01-01

    A recent survey of the Galaxy and M31 reveals that more than 90% of dwarf galaxies within 270 kpc of their host galaxy are deficient in H I gas. At such an extreme radius, the coronal halo gas is an order of magnitude too low to remove H I gas through ram pressure stripping for any reasonable orbit distribution. However, all dwarfs are known to have an ancient stellar population (∼> 10 Gyr) from early epochs of vigorous star formation which, through heating of H I, could allow the hot halo to remove this gas. Our model looks at the evolution of these dwarf galaxies analytically as the host-galaxy dark matter halo and coronal halo gas build up over cosmic time. The dwarf galaxies-treated as spherically symmetric, smooth distributions of dark matter and gas-experience early star formation, which sufficiently heats the gas, allowing it to be removed easily through tidal stripping by the host galaxy, or ram pressure stripping by a tenuous hot halo (n H = 3 x 10 -4 cm -3 at 50 kpc). This model of evolution is able to explain the observed radial distribution of gas-deficient and gas-rich dwarfs around the Galaxy and M31 if the dwarfs fell in at high redshift (z ∼ 3-10).

  18. Stiffness and Poisson ratio in longitudinal compression of fiber yarns in meso-FE modelling of composite reinforcement forming

    Wang, D.; Naouar, N.; Vidal-Salle, E.; Boisse, P.

    2018-05-01

    In meso-scale finite element modeling, the yarns of the reinforcement are considered to be solids made of a continuous material in contact with their neighbors. The present paper consider the mechanical behavior of these yarns that can happen for some loadings of the reinforcement. The yarns present a specific mechanical behavior when under longitudinal compression because they are made up of a large number of fibers, Local buckling of the fibers causes the compressive stiffness of the continuous material representing the yarn to be much weaker than when under tension. In addition, longitudinal compression causes an important transverse expansion. It is shown that the transverse expansion can be depicted by a Poisson ratio that remained roughly constant when the yarn length and the compression strain varied. Buckling of the fibers significantly increases the transverse dimensions of the yarn which leads to a large Poisson ratio (up to 12 for a yarn analyzed in the present study). Meso-scale finite element simulations of reinforcements with binder yarns submitted to longitudinal compression showed that these improvements led to results in good agreement with micro-CT analyses.

  19. Benchmarking of wind farm scale wake models in the EERA - DTOC project

    Réthoré, Pierre-Elouan; Hansen, Kurt Schaldemose; Barthelmie, R.J.

    2013-01-01

    -flow to combine wind farm (micro) and cluster (meso) scale wake models. For this purpose, a benchmark campaign is organized on the existing wind farm wake models available within the project, in order to identify which model would be the most appropriate for this coupling. A number of standardized wake cases......Designing offshore wind farms next to existing or planned wind farm clusters has recently become a common practice in the North Sea. These types of projects face unprecedented challenges in term of wind energy siting. The currently ongoing European project FP7 EERA - DTOC (Design Tool for Offshore...... wind farm Clusters) is aiming at providing a new type of model work-flow to address this issue. The wake modeling part of the EERA - DTOC project is to improve the fundamental understanding of wind turbine wakes and modeling. One of these challenges is to create a new kind of wake modeling work...

  20. Synergizing two NWP models to improve hub-height wind speed forecasts

    Liu, H. [Ortech International, Mississauga, ON (Canada); Taylor, P. [York Univ., Toronto, ON (Canada)

    2010-07-01

    This PowerPoint presentation discussed some of the methods used to optimize hub-height wind speed forecasts. Statistical and physical forecast paradigms were considered. Forecast errors are often dictated by phase error, while refined NWP modelling is limited by data availability. A nested meso-scale NWP model was combined with a physical model to predict wind and power forecasts. Maps of data sources were included as well as equations used to derive predictions. Data from meteorological masts located near the Great Lakes were used to demonstrate the model. The results were compared with other modelling prediction methods. Forecasts obtained using the modelling approach can help operators in scheduling and trading procedures. Further research is being conducted to determine if the model can be used to improve ramp forecasts. tabs., figs.

  1. Remote sensing applied to numerical modelling. [water resources pollution

    Sengupta, S.; Lee, S. S.; Veziroglu, T. N.; Bland, R.

    1975-01-01

    Progress and remaining difficulties in the construction of predictive mathematical models of large bodies of water as ecosystems are reviewed. Surface temperature is at present the only variable than can be measured accurately and reliably by remote sensing techniques, but satellite infrared data are of sufficient resolution for macro-scale modeling of oceans and large lakes, and airborne radiometers are useful in meso-scale analysis (of lakes, bays, and thermal plumes). Finite-element and finite-difference techniques applied to the solution of relevant coupled time-dependent nonlinear partial differential equations are compared, and the specific problem of the Biscayne Bay and environs ecosystem is tackled in a finite-differences treatment using the rigid-lid model and a rigid-line grid system.

  2. Reassessment of LRF radioimmunoassay in the plasma and hypothalamic extracts of rats and rams

    Caraty, A.; Reviers, M.-M. de; Pelletier, J.; Dubois, M.P.

    1980-01-01

    A highly sensitive and specific radioimmunoassay for LRF was applied to the measurement of endogenous LRF in various hypothalamic extracts. Specific antiserum was obtained by injecting LRF conjugated to human serum albumin with glutaraldehyde. Thyrotropin-releasing hormone, lysine vasopressin, oxytocin, noradrenaline, LH, FSH and cortical extracts did not appear to affect the assay, and the maximum cross-reaction observed with the LRF analogs tested was 8.5% with LRF 2-10. The best detection limit (0.4 pg/tube) was usually obtained when the labelled LRF had been purified by polyacrylamide gel electrophoresis. Within and between-assay coefficients of variation were 8.0 and 12.6% respectively (from B/Bo=20 to 80%). Synthetic LRF administered to rams by intravenous injection was readily detectable in the peripheral plasma. However, the direct measurement of plasma endogenous LRF may give misleading results due to non-specific interference by plasma factors. No endogenous LRF could be detected in plasma methanol or acetone extracts obtained from rats and rams in various physiological conditions. The inhibition curves parallel to the synthetic LRF curve were obtained by diluting the crude hypothalamic extracts of rams and rats, and a good correlation (r=0,997) with the Ramirez-McCann bioassay resulted, indicating that using radioimmunoassay to determine hypothalamic LRF content may be fruitful in studying hypothalamo-pituitary gonad interactions. The LRF content of rat and ovine hypothalami ranged from 2-8 to 20-80 ng of LRF, respectively

  3. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  4. SeaRAM: A DOE evaluation of maritime accident risk assessment data and methods

    Sprung, J.L.; Ammerman, D.J.; Koski, J.A.

    1998-03-01

    The SeaRAM Program conducted for the US Department of Energy by Sandia National Laboratories has developed estimates of the frequencies of occurrence of ship fires and ship collisions, the fraction of all ship fires and ship collisions that might be sufficiently severe to challenge the integrity of a Type B spent fuel transportation cask, the magnitude of the radioactive source terms that might be released from a Type B spent fuel transportation cask due to loss of cask integrity, and the magnitude of the radiological consequences that might be caused by the radioactive release

  5. The TN-RAM - a new cask for shipping high activity irradiated hardware

    Neider, T.; Hanson, A.S.

    1993-01-01

    Transnuclear, Inc. has developed a Type B(U) radioactive material transport packaging designed specifically for the transport of dry, irradiated, non-fuel bearing components (NFBC). The TN-RAM is a transport cask in the configuration of a right circular cylinder, fabricated from lead and stainless steel, with wood-filled impact limiters attached at both ends. The lead and stainless steel construction of the lid, walls, and bottom provides a shielding effectiveness of approximately 7.1 inches (18 cm) lead equivalent. (J.P.N.)

  6. SeaRAM: A DOE evaluation of maritime accident risk assessment data and methods

    Sprung, J.L.; Ammerman, D.J.; Koski, J.A.

    1998-03-01

    The SeaRAM Program conducted for the US Department of Energy by Sandia National Laboratories has developed estimates of the frequencies of occurrence of ship fires and ship collisions, the fraction of all ship fires and ship collisions that might be sufficiently severe to challenge the integrity of a Type B spent fuel transportation cask, the magnitude of the radioactive source terms that might be released from a Type B spent fuel transportation cask due to loss of cask integrity, and the magnitude of the radiological consequences that might be caused by the radioactive release.

  7. The Literary Criticism and Memoirs of Juan Ramón Jiménez

    Allen W. Phillips

    1983-01-01

    Full Text Available Equally as demanding of others as he was of himself, Juan Ramón Jiménez conceived of literary criticism as a serious and exacting task. The critic and the poet, standing side by side, are devoted to complementary activities of mutual enrichment. However fragmentary and partial the critical opinions of Juan Ramón may be (also outspoken and polemical in nature, they are invaluable as a personal historical and aesthetic guide to about fifty or sixty years of Hispanic literary development (1900-1960. Not to take them into account is to fail to recognize a highly important aspect of his total artistic personality. These varied critical texts are a product of a first rate intelligence and the sensibility of a writer of consummate discrimination who was endowed not only with an excellent memory but also a very special talent for appreciating the authentic. Juan Ramón as a critic is quick to praise (San Juan, Bécquer, Dario, Unamuno and Machado and at the same time strong in his censure of certain contemporaries. Several recently collected volumes of miscellaneous critical materials have resolved the bibliographical muddle for the initial study of this fundamental aspect of the poet, but still particularly important are the expressionistic portraits of Españoles de tres mundos , longer tributes to Valle, Ortega and Villaespesa as well as the extensive lectures delivered in his latter years. Examination of these pages gives us an historical and creative overview of the period in which he lived and worked in addition to original considerations about the evolution of Hispanic poetry. Of course, one of the constant focal points of his literary criticism was the modernist epoch of his early days, a movement or attitude which he considered to be a modern twentieth century renaissance. Together with detailed study of these two areas of historical and aesthetic nature, in the ensuing pages some conclusions are pointed out as to the essence of poetry

  8. Mentira y Verdad en tres Novelas de Sergio Ramírez: Algunos Procedimientos de Verosimilitud

    Rodríguez Sancho, Javier

    2013-01-01

    Con base en la narrativa del nicaragüense Sergio Ramírez, se efectúa un análisis sobre algunos procedimientos de verosimilitud utilizados por el escritor en tres de sus novelas: Tiempo de fulgor (1970); ¿Te dio miedo la sangre? (1977) y Un baile de máscaras (1995). La evaluación de los textos busca comprender los niveles en que el escritor hace uso de ciertos procedimientos de verosimilitud para contarnos algunas mentiras verdaderas como él mismo lo ha llamado, en su ensayo: Mentiras verdader...

  9. Santiago Ramón y Cajal and three-dimensional cinema.

    Santarén, Juan Fernández

    2015-01-01

    In this article, I present and comment on two unpublished letters written by the Spanish engineer Carlos Mendizábal Brunet to Santiago Ramón y Cajal informing him of the development of a new device for three-dimensional cinema and asking for his approval. Fortunately, the answers given by Cajal to these two letters have also been preserved, and they reveal his interest in three-dimensional cinema; in the letters, he reported that he himself had designed a prototype capable of creating on a screen a feeling of 3-D relief, a subject about which he was always passionate.

  10. Trayectos de lectura de Espacio, de Juan Ramón Jiménez

    Luján Atienza, Ángel Luis

    2013-01-01

    El estudio de Espacio, de Juan Ramón Jiménez, a partir de la teoría cognitiva de las metáforas conceptuales y la fusión de dominios conceptuales (blending), en confluencia con la filosofía heideggeriana, descubre en el poema dos movimientos contradictorios: el de la fuga y de la búsqueda de un centro, que se pueden poner en relación con dos trayectos de lectura y dos tendencias hermenéuticas: la modernista y la post-modernista. En este contexto se tratan de explicar las paradojas y complejida...

  11. Experimental investigation of the flow near the ram element in the brush turbine

    Schmirler M.

    2015-01-01

    Full Text Available The paper focuses on the investigating of the parameters of the fluid flow around the brush turbine ram element. The flow field was evaluated qualitatively by observing changes in density using a Schlieren method. It was also evaluated the influence of the element geometry on the total aerodynamic force of the element. The aerodynamic force was measured directly using a special aerodynamic balance. The aim of the project was to find the simplest element geometry with a maximum force effect and achieve an increase in overall efficiency and reduce the manufacturing costs.

  12. Test CMOS/SOS RAM for transient radiation upset comparative research and failure analysis

    Nikiforov, A.Y.; Poljakov, I.V.

    1995-01-01

    The test Complementary Metal-Oxide-Semiconductor/Silicon-on-Sapphire Random Access Memory (CMOS/SOS RAM) with eight types of memory cells was designed and tested at high dose rates with a flash X-ray machine and laser simulator. The memory cell (MC) design with additional transistors and RC-chain was found to be upset free up to 2 x 10 12 rad(Si)/s. An inversion effect was discovered in which almost 100% logic upset was observed in poorly protected memory cell arrays at very high dose rates

  13. Development and realization of the new state system of account and control of RAM and RAW

    Gubanov, V.; Shilko, V.; Syssoev, M.; Ershov, V.; Yanovskaya, N.

    1998-01-01

    In the article the principles of organization, organizational structure and main functions of the automated system of the state account and control of radioactive material (RAM) and waste (RAW), which is developed now in Russia, are presented. On the base of analysis the existing ( >) system the acute necessity in automation of processes of an account and control DA and DAI, based on use of modern information technologies is shown. There are presented a structure and content of normative - legal, program and information parts of the system and milestones of designing it. (author)

  14. Serum testosterone level and affecting factors in Syrian Awassi ram lambs

    Zarkawi, M.

    2004-01-01

    Results showed that testosterone exists in the blood of ram lams as early as the first month of age with no significant difference between single and twin births. This level, however, increased gradually with advancing age of ram lambs, indicating that the gonads (testes) of these growing lambs were active in secreting testosterone hormone after birth, but the rate of secretion differed with age of the lambs. A sharp increase in testosterone level was recorded at age of 8 months in twin births (5.32 ± 20.99 nmol/l) and in single births (7.26 ± 3.29 nmol/l). Throughout the study period, mean testosterone serum level was 3.29 ± 2.73 and 2.54 ± 2.15 nmol/l for single and twin births, respectively, as compared with an overall mean of 3.00 ± 2.49 nmol/l. However, the monthly difference in testosterone level between single and twin births was not significant (P>0.05) throughout the study period (10 months). Results also indicated an increase in live weight of lambs with advancing age, and live weight in single births was higher, but not significantly, than in twin births throughout the study period. Results of the study showed a sharp increase in the mean live weight of single births at age of 8 months (48.5 ± 10.8 kg) as compared with an overall live weight of the lambs (35.8 ± 15.2 and 32.7 ± 15.4 kg for single and twin births, respectively). A positive and significant correlation (r= 0.95, P>0.0001) was found between serum testosterone level and lamb live weight during the first 10 months of their age. Finally and for the first time, normal serum testosterone levels in Syrian Awassi ram lambs were determined during early stages. It was concluded, based on both, testosterone level and lamb live weight, that puberty in Awassi ram lambs could be reached at 8 months of age with a mean live weight of around 47 kg. Type of birth, lamb birth weight or weaning weight had no significant effect on testosterone level. (author)

  15. Genetic variability of Harton del Valle by RAM Variabilidad genética de Hartón del Valle mediante RAM

    Alvarez Franco Luz Angela

    2008-03-01

    Full Text Available Harton del Valle (HV breed belong to the seven Creole breeds of the Colombian bovine livestock, according to FAO criteria it is considered as vulnerable. To study its genetical variability, 33 HV animals and three and 3 animals of Holstein breed as a external control were sampled. Simples of DNA were isolated using the Salting Out method and RAM (Random amplified microsatellites technique was used. CGA, CCA, TG and CT primers were used. The mean value of expected heterocigozity was 0.26 and FST fue 0.39 ± 0.03. Using Dice–Nei Li index and UPGMA clustering method, two groups were distinguished: the first one integrated for two conservation herds and other one by tour faros that have been sharing breeding bulls.El Hartón del Valle (HV hace parte de las siete razas criollas de ganado bovino colombiano y de acuerdo con los criterios de la FAO está considerado como vulnerable. Para estudiar su variabilidad genética fueron muestreados 33 individuos HV y tres animales de la raza Holstein, como control externo. Se extrajo ADN utilizando el método de Salting Out y las muestras fueron analizadas mediante la técnica molecular RAM (Randon amplified microsatellites. Se utilizaron los cebadores CGA, CCA, TG, y CT. El valor promedio de heterocigosidad esperada fue de 0.26 y el FST fue 0.39 ± 0.03. Con el índice de Dice–Nei Li y agrupando con el método UPGMA se distinguieron dos grupos: uno integrado por dos hatos de conservación y el otro por cuatro fincas que han compartido reproductores.

  16. Seasonal variations of melatonin in ram seminal plasma are correlated to those of testosterone and antioxidant enzymes

    Muiño-Blanco Teresa

    2010-06-01

    Full Text Available Abstract Background Some breeds of sheep are highly seasonal in terms of reproductive capability, and these changes are regulated by photoperiod and melatonin secretion. These changes affect the reproductive performance of rams, impairing semen quality and modifying hormonal profiles. Also, the antioxidant defence systems seem to be modulated by melatonin secretion, and shows seasonal variations. The aim of this study was to investigate the presence of melatonin and testosterone in ram seminal plasma and their variations between the breeding and non-breeding seasons. In addition, we analyzed the possible correlations between these hormones and the antioxidant enzyme defence system activity. Methods Seminal plasma from nine Rasa Aragonesa rams were collected for one year, and their levels of melatonin, testosterone, superoxide dismutase (SOD, glutathione reductase (GRD, glutathione peroxidase (GPX and catalase (CAT were measured. Results All samples presented measurable quantities of hormones and antioxidant enzymes. Both hormones showed monthly variations, with a decrease after the winter solstice and a rise after the summer solstice that reached the maximum levels in October-November, and a marked seasonal variation (P Conclusions These results show the presence of melatonin and testosterone in ram seminal plasma, and that both hormones have seasonal variations, and support the idea that seasonal variations of fertility in the ram involve interplay between melatonin and the antioxidant defence system.

  17. Delayed puberty caused by hyperthyroidism in ram lambs is not a result of suppression in body growth.

    Chandrasekhar, Y; D'Occhio, M J; Setchell, B P

    1986-03-01

    Over a period of 8 weeks ram lambs (16 weeks old) were made hyperthyroidal (serum thyroxine approximately equal to 150 ng/ml, compared with control approximately equal to 48 ng/ml) by daily subcutaneous injections of thyroxine or maintained at a constant body weight by restriction of the feed intake. Hyperthyroidal and restricted-intake lambs remained at a constant body weight during the period of treatment whilst control rams gained body weight. Testicular growth was normal in restricted-intake lambs but was suppressed in hyperthyroidal animals. Hyperthyroidism, but not feed restriction, was also associated with decrease in LH pulse frequency (1.3 +/- 0.3/12 h compared with controls 4.8 +/- 0.9/12 h. Hyperthyroidal lambs showed normal LH responses to exogenous LHRH. After cessation of treatment testicular growth continued to be suppressed for up to 16 weeks in previously hyperthyroidic rams; thereafter testes began to increase in size but at 30 weeks after treatment were still smaller than those of control rams. It is concluded that elevated thyroxine concentrations directly influence sexual maturation in ram lambs through actions at hypothalamic and/or higher brain centres which control LH secretion. Transient hyperthyroidism during sexual maturation may cause permanent impairment of sexual development.

  18. Effects of Aflatoxin on Liver and Protective Effectiveness of Esterified Glucomannan in Merino Rams

    Fatma Colakoglu

    2012-01-01

    Full Text Available The effects of total aflatoxin (AF given orally on liver in Merino rams were studied. In addition, this study was conducted in order to evaluate the efficacy of an esterified glucomannan (EG for protection against aflatoxicosis. One-year-old 32 Merino rams were divided into four equal groups. The control group (C was fed with the commercial feed. The AF group was fed with commercial feed plus 250 μg/day of total AF. The EG group was fed with commercial feed plus 2 g/day of EG. The AF + EG group was fed with commercial feed plus 250 μg/day of total AF and 2 g/day of EG. After feeding period, tissue samples were taken from the liver in order to perform histological analyses. Vacuolar degeneration with small and large droplets and hydropic degeneration in hepatocytes were observed in the AF group. The ceroid pigmentation was observed in macrophages in groups or one by one. It was observed that the fat rate in hepatocytes was 2.6% in the C group, 35.5% in the AF group, 2.9% in the EG group, and 9.6% in the AF + EG group. In conclusion, the adverse effects caused by aflatoxicosis on the liver could be ameliorated by adding EG to the ration.

  19. The ties that bind? Galactic magnetic fields and ram pressure stripping

    Tonnesen, Stephanie; Stone, James, E-mail: stonnes@astro.princeton.edu, E-mail: jstone@astro.princeton.edu [Department of Astrophysics, Princeton University, Peyton Hall, Princeton, NJ 08544 (United States)

    2014-11-10

    One process affecting gas-rich cluster galaxies is ram pressure stripping (RPS), i.e., the removal of galactic gas through direct interaction with the intracluster medium (ICM). Galactic magnetic fields may have an important impact on the stripping rate and tail structure. We run the first magnetohydrodynamic (MHD) simulations of RPS that include a galactic magnetic field, using 159 pc resolution throughout our entire domain in order to resolve mixing throughout the tail. We find very little difference in the total amount of gas removed from the unmagnetized and magnetized galaxies, although a magnetic field with a radial component will initially accelerate stripped gas more quickly. In general, we find that magnetic fields in the disk lead to slower velocities in the stripped gas near the disk and faster velocities farther from the disk. We also find that magnetic fields in the galactic gas lead to larger unmixed structures in the tail. Finally, we discuss whether ram pressure stripped tails can magnetize the ICM. We find that the total magnetic energy density grows as the tail lengthens, likely through turbulence. There are μG-strength fields in the tail in all of our MHD runs, which survive to at least 100 kpc from the disk (the edge of our simulated region), indicating that the area-filling factor of magnetized tails in a cluster could be large.

  20. The Ties that Bind? Galactic Magnetic Fields and Ram Pressure Stripping

    Tonnesen, Stephanie; Stone, James

    2014-11-01

    One process affecting gas-rich cluster galaxies is ram pressure stripping (RPS), i.e., the removal of galactic gas through direct interaction with the intracluster medium (ICM). Galactic magnetic fields may have an important impact on the stripping rate and tail structure. We run the first magnetohydrodynamic (MHD) simulations of RPS that include a galactic magnetic field, using 159 pc resolution throughout our entire domain in order to resolve mixing throughout the tail. We find very little difference in the total amount of gas removed from the unmagnetized and magnetized galaxies, although a magnetic field with a radial component will initially accelerate stripped gas more quickly. In general, we find that magnetic fields in the disk lead to slower velocities in the stripped gas near the disk and faster velocities farther from the disk. We also find that magnetic fields in the galactic gas lead to larger unmixed structures in the tail. Finally, we discuss whether ram pressure stripped tails can magnetize the ICM. We find that the total magnetic energy density grows as the tail lengthens, likely through turbulence. There are μG-strength fields in the tail in all of our MHD runs, which survive to at least 100 kpc from the disk (the edge of our simulated region), indicating that the area-filling factor of magnetized tails in a cluster could be large.

  1. Effects of supplemental humic acid on ruminal fermentation and blood variables in rams

    Nurten Galip

    Full Text Available In this study, we particularly aimed to research the effect of supplemental humic acid on ruminal fermentation and blood variables in rams. A trial was conducted to evaluate the effect of humic acid (HA on protozoa count, percentages of different protozoa types and blood parameters. Three male Kivircik rams with ruminal cannula were used in a Latin square design, during 22 days periods (15 days for adaptation, 7 days for collection. They received 0 control group (CG, 5 g/day or 10 g/day of HA (HA5, HA10, assay groups. HA were added to the ration with grain diet. Ration was consisted of 5% grain diet and 95 % alfalfa hay. Rumen contents collected before, 3h and 6h after morning feeding on days 1 and 7 in each collection period were analyzed. Blood samples were also collected the same days. No significant difference in biochemical and hematological parameters (except eosinophils levels, P<0.05, variables of ruminal fluid (except sodium levels before feeding and species of rumen protozoa organism (except the percentage Epidinium spp. were evidenced with the addition of HA. In conclusion, we think that they might have been true the widely use in animal food of humates which don’t have any negative effect on biochemical and hematological parameters in particular.

  2. GAS LOSS BY RAM PRESSURE STRIPPING AND INTERNAL FEEDBACK FROM LOW-MASS MILKY WAY SATELLITES

    Emerick, Andrew; Low, Mordecai-Mark Mac [Department of Astronomy, Columbia University, New York, NY (United States); Grcevich, Jana [Department of Astrophysics, American Museum of Natural History, New York, NY (United States); Gatto, Andrea [Max-Planck-Institute für Astrophysik, Garching, bei München (Germany)

    2016-08-01

    The evolution of dwarf satellites in the Milky Way (MW) is affected by a combination of ram pressure stripping (RPS), tidal stripping, and internal feedback from massive stars. We investigate gas loss processes in the smallest satellites of the MW using three-dimensional, high-resolution, idealized wind tunnel simulations, accounting for gas loss through both ram pressure stripping and expulsion by supernova feedback. Using initial conditions appropriate for a dwarf galaxy like Leo T, we investigate whether or not environmental gas stripping and internal feedback can quench these low-mass galaxies on the expected timescales, shorter than 2 Gyr. We find that supernova feedback contributes negligibly to the stripping rate for these low star formation rate galaxies. However, we also find that RPS is less efficient than expected in the stripping scenarios we consider. Our work suggests that although RPS can eventually completely strip these galaxies, other physics is likely at play to reconcile our computed stripping times with the rapid quenching timescales deduced from observations of low-mass MW dwarf galaxies. We discuss the roles additional physics may play in this scenario, including host-satellite tidal interactions, cored versus cuspy dark matter profiles, reionization, and satellite preprocessing. We conclude that a proper accounting of these physics together is necessary to understand the quenching of low-mass MW satellites.

  3. Study of the effects of breed on some innate immunity parameters in rams

    Genova Krasimira

    2013-09-01

    Full Text Available Investigations were carried out on 26 rams from the breeds Karakachan and Copper-Red Shoumen. The non-specific immune parameters, phagocytic activity of leukocytes, bactericidal activity of phagocytes systems (oxygen-dependent and oxygen independent and total plasma protein level were evaluated. Phagocytic response was evaluated against S. aureus 209-P with a certain percentage of active phagocytes (phagocytic index and the number of absorbed particles per one phagocytic cells (phagocyte number. Phagocytosis completion index was defined as the percentage of the microbial cells that have been destroyed by phagocytes after incubation. State of the oxygen-dependent bactericidal systems of phagocytes was assessed in vitro using the NBT test, which reflects the ability of superoxide restore NBT in diphormazane. NBT test was evaluated by the degree of reduction in spontaneous and stimulated reactions, taking into account the intracellular deposits diphormazane. Our studies and results shows that the rams from the two local Bulgarian breeds have a high activity of innate immune parameters and that’s may be useful and important in the breeding programs as an indicator of resistance and highly tolerance to oxidative stress.

  4. RAM investigation of coal-fired thermal power plants: A case study

    D. Bose

    2012-04-01

    Full Text Available Continuous generation of electricity of a power plant depends on the higher availability of its components/equipments. Higher availability of the components/equipments is inherently associated with their higher reliability and maintainability. This paper investigates the reliability, availability and maintainability (RAM characteristics of a 210 MW coal-fired thermal power plant (Unit-2 from a thermal power station in eastern region of India. Critical mechanical subsystems with respect to failure frequency, reliability and maintainability are identified for taking necessary measures for enhancing availability of the power plant and the results are compared with Unit-1 of the same Power Station. Reliability-based preventive maintenance intervals (PMIs at various reliability levels of the subsystems are estimated also for performing their preventive maintenance (PM. The present paper highlights that in the Unit-2, Economizer (ECO & Furnace Wall Tube (FWT exhibits lower reliability as compared to the other subsystems and Economizer (ECO & Baffle Wall Tube (BWT demands more improvement in maintainability. Further, it has been observed that FSH followed Decreasing Failure Rate (DFR and Economizer (ECO is the most critical subsystem for both the plants. RAM analysis is very much effective in finding critical subsystems and deciding their preventive maintenance program for improving availability of the power plant as well as the power supply.

  5. Characterizing material properties of cement-stabilized rammed earth to construct sustainable insulated walls

    Rishi Gupta

    2014-01-01

    Full Text Available Use of local materials can reduce the hauling of construction materials over long distances, thus reducing the greenhouse gas emissions associated with transporting such materials. Use of locally available soils (earth for construction of walls has been used in many parts of the world. Owing to the thermal mass of these walls and the potential to have insulation embedded in the wall section has brought this construction material/technology at the forefront in recent years. However, the mechanical properties of the rammed earth and the parameters required for design of steel reinforced walls are not fully understood. In this paper, the author presents a case study where full-scale walls were constructed using rammed earth to understand the effect of two different types of shear detailing on the structural performance of the walls. The mechanical properties of the material essential for design such as compressive strength of the material including effect of coring on the strength, pull out strength of different rebar diameters, flexural performance and out-of-plane bending on walls was studied. These results are presented in this case study.

  6. The Influence Of Loam Type And Cement Content On The Compressive Strength Of Rammed Earth

    Narloch P. L.

    2015-03-01

    Full Text Available Currently, a worldwide dynamic rise of interest in using soil as a construction material can be observed. This trend is evident in the rapid rise of the amount of standards that deal with soil techniques. In 2012 the number of standards was larger by one third than five years prior. To create a full standardization of the rammed earth technique it is necessary to take into account the diversity of used soil and stabilizing additives. The proportion of the components, the process of element production and the research methods must also be made uniform. The article describes the results of research on the compressive strength of rammed earth samples that differed from each other with regards to the type of loam used for the mixture and the amount of the stabilizer. The stabilizer used was Portland cement CEM I 42.5R. The research and the analysis of the results were based on foreign publications, the New Zealand standard NZS 4298:1998, the American Standard NMAC14.7.4 and archival Polish Standards from the 1960’s that dealt with earth material.

  7. Interface engineered HfO2-based 3D vertical ReRAM

    Hudec, Boris; Wang, I-Ting; Lai, Wei-Li; Chang, Che-Chia; Hou, Tuo-Hung; Jančovič, Peter; Fröhlich, Karol; Mičušík, Matej; Omastová, Mária

    2016-01-01

    We demonstrate a double-layer 3D vertical resistive random access memory (ReRAM) stack implementing a Pt/HfO 2 /TiN memory cell. The HfO 2 switching layer is grown by atomic layer deposition on the sidewall of a SiO 2 /TiN/SiO 2 /TiN/SiO 2 multilayer pillar. A steep vertical profile was achieved using CMOS-compatible TiN dry etching. We employ in situ TiN bottom interface engineering by ozone, which results in (a) significant forming voltage reduction which allows for forming-free operation in AC pulsed mode, and (b) non-linearity tuning of low resistance state by current compliance during Set operation. The vertical ReRAM shows excellent read and write disturb immunity between vertically stacked cells, retention over 10 4 s and excellent switching stability at 400 K. Endurance of 10 7 write cycles was achieved using 100 ns wide AC pulses while fast switching speed using pulses of only 10 ns width is also demonstrated. The active switching region was evaluated to be located closer to the bottom interface which allows for the observed high endurance. (paper)

  8. Behaviour and kinematics of continuous ram filtration in bowhead whales (Balaena mysticetus)

    Simon, Malene Juul; Johnson, Mark; Madsen, Peter Teglberg

    2009-01-01

    Balaenid whales perform long breath-hold foraging dives despite a high drag from their ram filtration of zooplankton. To maximize the volume of prey acquired in a dive with limited oxygen supplies, balaenids must either filter feed only occasionally when prey density is particularly high, or they......Balaenid whales perform long breath-hold foraging dives despite a high drag from their ram filtration of zooplankton. To maximize the volume of prey acquired in a dive with limited oxygen supplies, balaenids must either filter feed only occasionally when prey density is particularly high......, or they must swim at slow speeds while filtering to reduce drag and oxygen consumption. Using digital tags with three-axis accelerometers, we studied bowhead whales feeding off West Greenland and present here, to our knowledge, the first detailed data on the kinematics and swimming behaviour of a balaenid...... whale filter feeding at depth. Bowhead whales employ a continuous fluking gait throughout the bottom phase of foraging dives, moving at very slow speeds (less than 1 m s-1), allowing them to filter feed continuously at depth. Despite the slow speeds, the large mouth aperture provides a water filtration...

  9. Spiking Neural Networks Based on OxRAM Synapses for Real-Time Unsupervised Spike Sorting.

    Werner, Thilo; Vianello, Elisa; Bichler, Olivier; Garbin, Daniele; Cattaert, Daniel; Yvert, Blaise; De Salvo, Barbara; Perniola, Luca

    2016-01-01

    In this paper, we present an alternative approach to perform spike sorting of complex brain signals based on spiking neural networks (SNN). The proposed architecture is suitable for hardware implementation by using resistive random access memory (RRAM) technology for the implementation of synapses whose low latency (spike sorting. This offers promising advantages to conventional spike sorting techniques for brain-computer interfaces (BCI) and neural prosthesis applications. Moreover, the ultra-low power consumption of the RRAM synapses of the spiking neural network (nW range) may enable the design of autonomous implantable devices for rehabilitation purposes. We demonstrate an original methodology to use Oxide based RRAM (OxRAM) as easy to program and low energy (Spike Timing Dependent Plasticity. Real spiking data have been recorded both intra- and extracellularly from an in-vitro preparation of the Crayfish sensory-motor system and used for validation of the proposed OxRAM based SNN. This artificial SNN is able to identify, learn, recognize and distinguish between different spike shapes in the input signal with a recognition rate about 90% without any supervision.

  10. Observing RAM Pressure Stripping and Morphological Transformation in the Coma Cluster

    Gregg, Michael; West, Michael

    2017-07-01

    The two largest spirals in the Coma cluster, NGC4911 and NGC4921, are being vigorously ram-pressure stripped by the hot intracluster medium. Our HST ACS and WFC3 images have revealed galactic scale shock fronts, giant "Pillars of Creation", rivulets of dust, and spatially coherent star formation in these grand design spirals. We have now obtained HST WFC3 imaging of five additional large Coma spirals to search for and investigate the effects of ram pressure stripping across the wider cluster environment. The results are equally spectacular as the first two examples. The geometry of the interactions in some cases allows an estimation of the various time scales involved, including gas flows out of the disk leading to creation of the ICM, and the attendant triggered star formation in the galaxy disks. The global star formation patterns yield insights into the spatial and temporal ISM-ICM interactions driving cluster galaxy evolution and ultimately transforming morphologies from spiral to S0. These processes were much more common in the early Universe when the intergalactic and intracluster components were initially created from stripping and destruction of member galaxies.

  11. Effects of experimental Trypanosoma congolense infection on sperm morphology in Yankasa rams

    Oluyinka O. Okubanjo

    2015-10-01

    Full Text Available The objective of the study was to determine the effect of T. congolense on the sperm morphology of Yankasa rams (YKR. Nine YKR aged 24-30 months-old were assigned into two groups of 6 infected and 3 uninfected control and were monitored for 7 weeks. The infected group of YKR was each inoculated with 1 x 106 T. congolense through the jugular vein, while the control group remained uninfected. The entire infected group developed trypanosomosis post infection (pi characterized by sperm morphological abnormalities in the semen. There were significant (P<0.001 increases in the mean percentage of acrosomal, head, middle piece and tail abnormalities. Proximal and distal droplets as well detached heads were also significantly (P<0.001 increased post infection (pi. Acrosomal abnormalities, distal droplet and tail abnormalities increased from week 1 pi till the end of the study, while head abnormalities and detached heads increased from week 2 pi. Middle piece abnormalities and proximal droplets increased from week 3 and 4 pi till the end of the study respectively. The high incidence of morphological defects caused by T. congolense is capable of causing infertility from the first week pi thereby making the rams unfit for breeding at the end of the study.

  12. Effects of supplemental humic acid on ruminal fermentation and blood variables in rams

    Umit Polat

    2010-11-01

    Full Text Available In this study, we particularly aimed to research the effect of supplemental humic acid on ruminal fermentation and blood variables in rams. A trial was conducted to evaluate the effect of humic acid (HA on protozoa count, percentages of different protozoa types and blood parameters. Three male Kivircik rams with ruminal cannula were used in a Latin square design, during 22 days periods (15 days for adaptation, 7 days for collection. They received 0 control group (CG, 5 g/day or 10 g/day of HA (HA5, HA10, assay groups. HA were added to the ration with grain diet. Ration was consisted of 5 % grain diet and 95 % alfalfa hay. Rumen contents collected before and, 3h and 6h after morning feeding on days 1 and 7 in each collection period were analyzed. Blood samples were also collected the same days. No significant difference in biochemical and hematological parameters (except eosinophils levels, P, variables of ruminal fluid (except sodium levels before feeding and species of rumen protozoa organism (except the percentage Epidinium spp. were evidenced with the addition of HA. In conclusion, we think that they might have been true the widely use in animal food of humates which don’t have any negative effect on biochemical and hematological parameters in particular. 

  13. Diversas obras de Maricarmen Sánchez de Ramírez, en Venezuela

    Editorial, Equipo Editorial

    1981-02-01

    Full Text Available This paper deals with three important works of the Madrid born Venezuelan architect, Mari Carmen Sánchez de Ramírez. The first, and the only one completed at present, are seven onefamily dwellings grouped together in one volumetric and structural unit. The second is a tall office building, triangular in shape and composed of a thirty-two story tower, a ground floor public area and a ten floor mechanically operated parking garage. Third and last is the Multi-purpose Complex, located on the coast. It is made up of commercial areas, residential areas, offices, parking facilities and public areas.

    En este trabajo se recogen tres interesantes obras de la arquitecto venezolana, nacida en Madrid, Maricarmen Sánchez de Ramírez. La primera, única realizada hasta la fecha, trata de la agrupación de siete viviendas unifamiliares en una misma unidad volumétrica y estructural. La segunda corresponde a un alto edificio de oficinas, de sección triangular, y compuesto por una torre de 32 niveles, un cuerpo bajo de espacios públicos y un estacionamiento mecánico de 10 plantas de altura. La tercera y última comprende un complejo multiuso, situado en la costa, formado por zonas comerciales, áreas de vivienda, oficinas, estacionamiento y espacios públicos.

  14. A grid-independent EMMS/bubbling drag model for bubbling and turbulent fluidization

    Luo, Hao; Lu, Bona; Zhang, Jingyuan

    2017-01-01

    The EMMS/bubbling drag model takes the effects of meso-scale structures (i.e. bubbles) into modeling of drag coefficient and thus improves coarse-grid simulation of bubbling and turbulent fluidized beds. However, its dependence on grid size has not been fully investigated. In this article, we adopt...... a two-step scheme to extend the EMMS/bubbling model to the sub-grid level. Thus the heterogeneity index, HD, which accounts for the hydrodynamic disparity between homogeneous and heterogeneous fluidization, can be correlated as a function of both local voidage and slip velocity. Simulations over...... a periodic domain show the new drag model is less sensitive to grid size because of the additional dependence on local slip velocity. When applying the new drag model to simulations of realistic bubbling and turbulent fluidized beds, we find grid-independent results are easier to obtain for high...

  15. Single port-assisted fully laparoscopic abdominoperineal resection (APR) with immediate V-RAM flap reconstruction of the perineal defect.

    Ali, Sayid

    2012-09-01

    Abdominoperineal resection (APR) of anorectal cancers after neoadjuvant chemoradiotherapy may incur significant perineal morbidity. While vertical rectus abdominis muscle (V-RAM) flaps can fill the pelvic resection space with health tissue, their use has previously been described predominantly in association with laparotomy. Here, we describe a means of combination laparoscopic APR with V-RAM flap reconstruction that allows structural preservation of the entire abdominal wall throughout the oncological resection and of the deep parietal layers after V-RAM donation. Furthermore, a single port access device used at the end colostomy site allows a second senior surgeon assist with an additional two working instruments for the purpose of improved pelvic tissue retraction, especially useful in obese patients.

  16. Recurrent 3-day cycles of water deprivation for over a month depress mating behaviour but not semen characteristics of adult rams.

    Khnissi, S; Lassoued, N; Rekik, M; Ben Salem, H

    2016-02-01

    This study aimed to investigate the effect of water deprivation (WD) on reproductive traits of rams. Ten mature rams were used and allocated to two groups balanced for body weight. Control (C) rams had free access to drinking water, while water-restricted rams (WD) were deprived from water for 3 consecutive days and early on the morning of day 4, they had ad libitum access to water for 24 h, similar to C animals. The experiment lasted 32 days, that is eight 4-day cycles of water deprivation and subsequent watering. Feed and water intake were significantly affected by water deprivation; in comparison with C rams, WD rams reduced their feed intake by 18%. During the watering day of the deprivation cycle, WD rams consumed more water than C rams on the same day (11.8 (SD = 3.37) and 8.4 (SD = 1.92) l respectively; p water deprivation. However, testosterone levels were lowered as a result of water deprivation and average values were 10.9 and 6.2 (SEM 1.23) ng/ml for C and WD rams respectively (p cycles 5 and 8 of water deprivation. Several mating behaviour traits were modified as a result of water deprivation. When compared to controls, WD rams had a more prolonged time to first mount attempt (p Water deprivation may have practical implications reducing the libido and therefore the serving capacity of rams under field conditions. Journal of Animal Physiology and Animal Nutrition © 2015 Blackwell Verlag GmbH.

  17. A WARM MOLECULAR HYDROGEN TAIL DUE TO RAM-PRESSURE STRIPPING OF A CLUSTER GALAXY

    Sivanandam, Suresh; Rieke, Marcia J.; Rieke, George H.

    2010-01-01

    We have discovered a remarkable warm (130-160 K) molecular hydrogen tail with a H 2 mass of approximately 4 x 10 7 M sun extending 20 kpc from a cluster spiral galaxy, ESO 137-001, in Abell 3627. At least half of this gas is lost permanently to the intracluster medium, as the tail extends beyond the tidal radius of the galaxy. We also detect a hot (400-550 K) component in the tail that is approximately 1% of the mass. The large H 2 line to IR continuum luminosity ratio in the tail indicates that star formation is not a major excitation source and that the gas is possibly shock-heated. This discovery confirms that the galaxy is currently undergoing ram-pressure stripping, as also indicated by its previously discovered X-ray and Hα tails. We estimate that the galaxy is losing its warm H 2 gas at a rate of ∼2-3 M sun yr -1 . The true mass-loss rate is likely higher if we account for cold molecular gas and atomic gas. We predict that the galaxy will lose most of its gas in a single pass through the core and place a strong upper limit on the ram-pressure timescale of 1 Gyr. We also study the star-forming properties of the galaxy and its tail. We identify most of the previously discovered external Hα sources within the tail in our 8 μm data but not in our 3.6 μm data; IRS spectroscopy of the region containing these Hα sources also reveals aromatic features typically associated with star formation. From the positions of these H II regions, it appears that star formation is not occurring throughout the molecular hydrogen tail but only immediately downstream of the galaxy. Some of these H II regions lie outside the tidal radius of the galaxy, indicating that ram-pressure stripping can be a source of intracluster stars.

  18. Programming scheme based optimization of hybrid 4T-2R OxRAM NVSRAM

    Majumdar, Swatilekha; Kingra, Sandeep Kaur; Suri, Manan

    2017-09-01

    In this paper, we present a novel single-cycle programming scheme for 4T-2R NVSRAM, exploiting pulse engineered input signals. OxRAM devices based on 3 nm thick bi-layer active switching oxide and 90 nm CMOS technology node were used for all simulations. The cell design is implemented for real-time non-volatility rather than last-bit, or power-down non-volatility. Detailed analysis of the proposed single-cycle, parallel RRAM device programming scheme is presented in comparison to the two-cycle sequential RRAM programming used for similar 4T-2R NVSRAM bit-cells. The proposed single-cycle programming scheme coupled with the 4T-2R architecture leads to several benefits such as- possibility of unconventional transistor sizing, 50% lower latency, 20% improvement in SNM and ∼20× reduced energy requirements, when compared against two-cycle programming approach.

  19. En femenino: Apuntes sobre la obra de Esperanza Barroso y Raquel Ramírez

    Andrés Leonardo Caballero Piza

    2016-03-01

    Full Text Available El siguiente artículo proporciona algunas coordenadas de interpretación para la obra de las artistas santandereanas Esperanza Barroso y Raquel Ramírez, desde los conceptos de currículo oculto y micropolítica, y desde diversas fuentes documentales de carácter historiográfico (catálogos, folletos, recortes de prensa y entrevistas. Mediante el concepto de currículo oculto se reconstruye de forma general el ámbito en que fueron educadas ambas artistas, mientras que con el de micropolítica se inscriben sus obras en las preocupaciones del arte colombiano de los setentas, que giraron en torno de los modos de representación del cuerpo desde el deseo individual, la emancipación subjetiva y las restricciones jurídicas del Estado.

  20. Quality and freezing qualities of first and second ejaculates collected from endangered Gulf Coast Native rams.

    Nel-Themaat, L; Harding, G D; Chandler, J E; Chenevert, J F; Damiani, P; Fernandez, J M; Humes, P E; Pope, C E; Godke, R A

    2006-10-01

    The Gulf Coast Native sheep, or Louisiana Native sheep, is an endangered previously feral domestic sheep population of European origin that has been under natural selection pressure for reproductive survival in their transplanted range while roaming in the southern Gulf Coast Region of the United States. This sheep population has an increased natural resistance to internal parasites, breeds year-around and has a greater percentage of live lambs as compared with other breeds of sheep raised in similar environments. To preserve the genetic diversity of this important feral sheep population, semen was collected by electro-ejaculation and subjected to cryopreservation for subsequent storage in a genome resource bank. Unrelated rams (n=5) were collected 3 days-a-week, allowing at least 2 days of rest between collections. Two ejaculates were obtained from each ram per collection day, with the second collection conducted 10min after the first ejaculation. Semen was processed using the standard Salamon cryopreservation procedure in a Tris-yolk-glycerol extender, frozen in 0.5ml plastic straws using liquid nitrogen (LN(2)) vapor and stored in LN(2). Each ejaculate was evaluated for volume, sperm concentration/ml (x10(9)/ml), number of spermatozoa/ejaculate (x10(9)), sperm progressive motility (%) for pre-cooled semen, cooled semen and semen after thawing. For the five rams, each semen variable for the first ejaculate was compared with that of the second ejaculate collected 10min later. The mean semen volume, sperm concentration and number of spermatozoa per ejaculate obtained from the first ejaculate were significantly greater (P< or =0.01) than those of the second ejaculate (comparisons being 1.62 and 1.06; 3.2 and 1.5; 5.4 and 1.8, respectively). Overall, the mean motility of pre-cooled (22 degrees Celsius), cooled (5 degrees Celsius) and frozen (-196 degrees Celsius) post-thawed spermatozoa was less (P< or =0.01) in the first ejaculate (71.5, 64.8 and 34.1%, respectively

  1. Ramón Torres Méndez y la pintura de tipos y costumbres

    Efraín Sánchez Cabra

    1991-09-01

    Full Text Available En 1940, al anunciar la publicación de 37 "escenas de costumbres" de Ramón Torres Méndez, la revista Cromos lo presentó como "el pintor más famoso de Colombia". A juzgar por casi un siglo de testimonios, Cromos no exageraba. Hasta mediados del siglo XX las "escenas de costumbres" de Torres Méndez fueron uno de los recursos más frecuentemente utilizados en los periódicos y revistas locales para la ilustración de relatos de viajes, descripciones de tradiciones y costumbres bogotanas y aun para la publicidad de industrias y casas comerciales. Hasta mediados del presente siglo, los escasos críticos y comentaristas del arte nacional fueron unánimes en situar a Torres Méndez como el pintor más notable de la Nueva Granada en el siglo XIX.

  2. Beyond disciplinary borders. H. A. Lorentz and S. Ramón y Cajal.

    Fernández Santarén, J; Kox, A J; Sánchez-Ron, J M

    2014-01-01

    Science is a multidisciplinary enterprise. Mathematics, physics, chemistry, biology, geology, and many other, perhaps not so " basic ", but not less interesting disciplines form what we call " science ". The task of history of science is to recover and put order in the past of such disciplines. Although, on most the occasions, those histories are limited by the territories of the different sciences, we know that their frontiers are not impermeable, that there are relationships between them. However, it is not frequent to find studies dealing with those relationships, especially dealing with relations among scientists belonging to different fields. In the present paper, we study a case in which two outstanding scientists, a physicist and a histologist (or neuroscientist, as we would say today), the Dutchman Hendrik A. Lorentz and the Spanish Santiago Ramón y Cajal, maintained a, albeit brief, relation. Both being such prominent scientific figures, of worldwide stature, the relation they maintained deserves to be known.

  3. Effect of suction on the mechanical characteristics of uniformly compacted rammed earth

    El Hajjar, A.; Chauhan, P.; Prime, N.; Plé, O.

    2018-04-01

    Rammed earth, in the current environmental situation, is an alternative construction technique which can help in reducing energy and raw material consumption owing to its “sustainable” characteristics. To fully understand its behavior and properties, recent scientific investigations consider it as a compacted unsaturated material with suction as its one of the main sources of strength. Eathern constructions face, over their lifetime, variations in the suction state which have a significant impact on their mechanical characteristics. In the present contribution, unconfined compression tests are performed, with and without unload-reload cycles, on homogeneously compacted samples subjected to various suction conditions. This study shows that both the unconfined compressive strength and Young modulus reduce with the reduction of suction states. Suction also seems to influence the amount of plastic strains and damage phenomenon. Indeed, the soils analyzed are slightly active and shows both plasticity behavior and damage phenomenon.

  4. Novel Power Reduction Technique for ReRAM with Automatic Avoidance Circuit for Wasteful Overwrite

    Takaya Handa

    2012-01-01

    Full Text Available Low-power operations can be great advantageous for ReRAM devices. However, wasteful overwriting such as the SET operation to low-resistance state (LRS device and the RESET operation to high-resistance state (HRS device causes not only an increase in power but also the degradation of the write cycles due to repeatedly rewriting. Thus, in this paper, we proposed a novel automatic avoidance circuit for dealing with wasteful overwriting that uses a sense amplifier and estimated the energy consumption reduction rate by conducting a circuit simulation. As a result, this circuit helped to reliably avoid the wasteful overwriting operation to reduce about 99% and 97% of wasteful energy using VSRC and CSRC, respectively.

  5. Ramón J. Sender tra verità e finzione, con epilogo cinematografico

    Arianna Fiore

    2015-12-01

    Full Text Available The Spanish cultural renaissance of the first three decades of the 20th century was interrupted in 1936, when intellectuals abandoned their aesthetic ambitions to describe war. However, some writers were immune to the aesthetic charm of the period. Ramón J. Sender in the 20s used a testimonial style in his journalistic collaborations and in the 30s approached reality for militant purposes, thus anticipating the hybridization of reality and fiction. He narrated the Casas Viejas anarchist revolt in his news reports (1933 and in two narrative reworks, Casas viejas (1933 and Viaje a la aldea del crimen (1934. Fifty years later, the meeting of fiction and reality and the hybridity of genres will also characterize the narrative approach adopted by cinema in narrating the same facts.

  6. Response of PMHS to high- and low-speed oblique and lateral pneumatic ram impacts.

    Rhule, Heather; Suntay, Brian; Herriott, Rodney; Amenson, Tara; Stricklin, Jim; Bolte, John H

    2011-11-01

    In ISO Technical Report 9790 (1999) normalized lateral and oblique thoracic force-time responses of PMHS subjected to blunt pendulum impacts at 4.3 m/s were deemed sufficiently similar to be grouped together in a single biomechanical response corridor. Shaw et al. (2006) presented results of paired oblique and lateral thoracic pneumatic ram impact tests to opposite sides of seven PMHS at sub-injurious speed (2.5 m/s). Normalized responses showed that oblique impacts resulted in more deflection and less force, whereas lateral impacts resulted in less deflection and more force. This study presents results of oblique and lateral thoracic impacts to PMHS at higher speeds (4.5 and 5.5 m/s) to assess whether lateral relative to oblique responses are different as observed by Shaw et al. or similar as observed by ISO. Twelve PMHS were impacted by a 23 kg pneumatic ram with a 152.4 mmx304.8 mm rectangular face plate at the level of the xyphoid process in either the pure lateral or 30° anterior-to-lateral oblique direction. Because these tests were potentially injurious, only one test per subject was conducted. Normalized responses demonstrate similar characteristics for both lateral and oblique impacts, indicating that it may be reasonable to combine lateral and oblique responses together at these higher speeds to define characteristic PMHS response as was done by ISO. The small number of tests conducted indicates that less chest compression may be required to obtain serious thoracic injury in oblique impacts as compared to lateral impacts at speeds of 4.5 or 5.5 m/s.

  7. Histopathological changes and inflammatory response induced by Tityus discrepans scorpion venom in rams.

    D'Suze, G; Salazar, V; Díaz, P; Sevcik, C; Azpurua, H; Bracho, N

    2004-12-15

    Anesthetized rams envenomed s.c. with 40 microg/kg Tityus discrepans scorpion venom developed fasciculation, hypothermia, polyuria, pulmonary wet rales, tachypnea, respiratory distress and arrhythmia. Rams developed a cascade of inflammation reactions, characterized by activation of macrophages, fibroblasts and neutrophils, neutrophil infiltration and aggregation, vasculitis, arteritis and abundant fibrin deposition. At the inoculation site, venom was detected by immunohistochemistry in the extra cellular matrix, lymphatic vessels' and venules' lumen, inside macrophages and surrounding nerves. Extra cellular matrix was degraded at the inoculation site perhaps by activated neutrophils. Envenoming produced hepatocytes with Mallory body-like vacuoles which may be due to the increased plasmatic levels of TNF-alpha and IL6. Venom produced degranulation and vacuolization of acinary cells as well as interstitial swelling and necrosis. Necrosis of the Langerhan's islets occurred occasionally. Lungs showed the most deleterious effects developing wall collapse and necrosis, diffuse injury of the alveolar capillary barrier, interstitial and alveolar fibrin deposits with strong neutrophil infiltration. Massive infiltration of lymphocytes and macrophage occurred in the intestinal submucose, to the point that it modified villi and intestinal folding morphology. Envenomation developed a marked leukocyte aggregation surrounding nerves at the inoculation site. This study reveals that beyond its neurotoxicity, Tityus venom produces a severe and widespread inflammatory syndrome, expressed as histopathological changes at the site of inoculation, as well as in remote organs such as pancreas, lungs, intestine and liver. Our results suggest that not all remote targets are directly affected by the venom but that, as proposed earlier, are modified by inflammation by products produced elsewhere.

  8. Evaluating pasture and soil allowance of manganese for Kajli rams grazing in semi-arid environment.

    Khan, Zafar Iqbal; Ahmad, Kafeel; Ashraf, Muhammad; Naqvi, Syed Ali Hassan; Seidavi, Alireza; Akram, Nudrat Aisha; Laudadio, Vito; Tufarelli, Vincenzo

    2015-03-01

    The current research on the manganese (Mn) transfer from soil to plant as well as to grazing Kajli rams in the form of sampling periods was carried out under semi-arid environmental conditions. Forage, soil and blood plasma samples were collected during 4 months of the year after a 1-month interval, and Mn concentrations were assessed after wet digestion using an atomic absorption spectrophotometer. Results showed that Mn concentration in soil ranged from 48.28 to 59.44 mg/kg, with incoherent augment and decline across sampling periods, and effect of sampling period on soil Mn was also found to be significant (P soil appeared higher than the critical value and sufficient for forage crop requirement. The Mn concentration in forage ranged between 24.8 and 37.2 mg/kg, resulting deficient based on the requirement allowance of Mn for livestock grazing animals, therein with almost unchanged forage Mn concentration. The Mn values in blood plasma of rams varied from 0.066 to 0.089 mg/l, with a consistent increase based on sampling period, and the effect of sampling periods on plasma Mn was found to be highly significant (P soil and plant species amassing capability on the transport of Mn in the soil-plant-animal system. Results indicated a much higher accumulation rate at the sampling characterized by vegetation dominated by legumes in comparison to grasses, crop residues and mixed pasture and a pronounced seasonal supply of Mn at the four sampling period of grazing land of diverse botanical composition.

  9. Carmen de Burgos y Ramón Gómez de la Serna

    Ubach Medina, Antonio

    2010-06-01

    Full Text Available Carmen de Burgos, born in the southern province of Almería, arrives to Madrid at the beginning of the 20th century. She has decided to maintain her independence after an unhappy marriage and to earn her bread with her writings. She also uses them to promote different social issues, her idea of literature and the young writers who are starting their careers. Ramón Gómez de la Serna, twenty years her younger, meets her in 1908, when he is starting his career. Carmen represents the ideal woman he describes in his conference titled “The New Literature”. Along the next twenty years they share their lives, travels and writing in a rich partnership that ends suddenly in 1929 after the short flirt of Carmen’s daughter with the writer.

    Carmen de Burgos, proveniente de la sureña provincia de Almería, llega a Madrid a principios del s. XX, decidida a mantener su independencia tras un desdichado matrimonio y a ganarse la vida escribiendo, apoyando una serie de causas sociales, su idea de la literatura y los jóvenes valores. Ramón Gómez de la Serna, veinte años más joven que ella, la conoce en 1908, cuando comienza su carrera literaria. Carmen encarna el ideal de mujer que describe en su conferencia sobre “La nueva literatura”. Durante veinte años comparten vida, viajes y escritura en una fructífera compañía que termina bruscamente en 1929 tras la relación fugaz de la hija de Carmen con el escritor.

  10. Embedding complex hydrology in the regional climate system – Dynamic coupling across different modelling domains

    Butts, Michael; Drews, Martin; Larsen, Morten Andreas Dahl

    2014-01-01

    the atmosphere and the groundwater via the land surface and can represent the lateral movement of water in both the surface and subsurface and their interactions, not normally accounted for in climate models. Meso-scale processes are important for climate in general and rainfall in particular. Hydrological......To improve our understanding of the impacts of feedback between the atmosphere and the terrestrial water cycle including groundwater and to improve the integration of water resource management modelling for climate adaption we have developed a dynamically coupled climate–hydrological modelling...... impacts are assessed at the catchment scale, the most important scale for water management. Feedback between groundwater, the land surface and the atmosphere occurs across a range of scales. Recognising this, the coupling was developed to allow dynamic exchange of water and energy at the catchment scale...

  11. PC-version of RAM6-code for calculation of parameters of the effective logarithmic boundary condition at the absorbent rod surface in reactor

    Le Van Ngoc; Ngo Dang Nhan

    1990-01-01

    The RAM-6 code for calculation of parameters of the effective logarithmic boundary condition at the absorbent rod surface in reactor is suitably modofied to work on IBM PC, the instructions for its usage are presented and capabilities of the personal cpmputer oriented RAM-6 code are demonstrated. (author). 4 refs, 5 tabs, 2 figs

  12. Temporal concentrations of cortisol and LH in virgin ewes acutely exposed to rams during the transition into the breeding season.

    McCosh, R B; Berry, E M; Wehrman, M E; Redden, R R; Hallford, D M; Berardinelli, J G

    2015-03-01

    The objectives of this study were to determine if exposing seasonally anovular ewes to rams would alter patterns of cortisol concentrations, and if these changes are associated with changes in characteristics of LH concentrations. Seasonally anestrous ewes were assigned to be exposed to rams (RE; n=11) or wethers (NE; n=12). Blood samples were collected at 15-min intervals beginning 120 min before introduction of males (time=0 min), and continued for 360 min after male exposure. Characteristics of cortisol and LH concentrations included: mean and baseline concentrations, pulse amplitude, duration, frequency, and time to first pulse. Mean and baseline cortisol concentrations, and cortisol pulse amplitude, frequency, and time to first pulse after male exposure did not differ between RE and NE ewes. Cortisol pulse duration was longer (Pewes than in NE ewes. Mean LH and LH pulse amplitude, duration, and time to first pulse after male exposure did not differ between RE and NE ewes. Baseline LH concentrations and LH pulse frequency were greater (Pewes. In RE ewes, but not NE ewes, LH pulse frequency tended to increase (P=0.06) as pulse frequency of cortisol decreased. In conclusion, exposing ewes to mature rams during the transition into the breeding season increased LH pulse frequency which hastened ovulatory activity. However, the results do not support the hypothesis that changes in cortisol concentrations plays a significant role in the 'ram effect'. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Negative effect of combined cysteine and glutathione in soy lecithin-based extender on post-thawed ram spermatozoa.

    Zhandi, Mahdi; Sharafi, Mohsen

    2015-09-01

    This study was conducted to evaluate the effect of combined cysteine and glutathione in soy lecithin-based semen extender on post-thawed ram sperm quality. A total of 28 ejaculates were collected twice a week (from four rams) during breeding season. In each replicate, semen samples (n = 4, one ejaculate for each ram) were pooled and divided into three equal parts, and each part was diluted with one of following extender: (1) soy lecithin-based extender containing no cysteine and no glutathione (C0-G0), (2) soy lecithin-based extender containing cysteine (5 mM) and glutathione (5 mM) (C5-G5), and (3) soy lecithin-based extender containing cysteine (10 mM) and glutathione (10 mM) (C10-G10). After freeze-thawing process, motility and velocity parameters, plasma membrane integrity and functionality, mitochondrial activity, and apoptosis features of spermatozoa were evaluated. The obtained results showed that total and progressive motility, plasma membrane integrity and functionality, and live post-thawed spermatozoa was lower in C10-G10 extender compared to C0-G0 and C5-G5 extenders (P 0.05). In conclusion, it seems that high concentration of combined cysteine and glutathione in soy lecithin-based semen extender has a detrimental effect of post-thawed ram sperm quality.

  14. Uudised : Kaheksas "Credo". RAM alustab hooaega. šoti naistrio Eestis. Kingitus operetisõpradele / Joosep Sang

    Sang, Joosep

    2001-01-01

    Tallinnas toimuvast VIII rahvusvahelisest õigeusu vaimuliku muusika festivalist "Credo". RAM esineb 23. ja 26. sept. kavaga "Päikese- ja kuuvarjutuse palvelaul". šoti trio esineb Tallinnas ja Tartus ning annab õpitoa Viljandis. 12. sept. esitleti Estonia talveaias K. Karaski CD-plaati "Bajadeer"

  15. 76 FR 65317 - 60-Day Notice of Proposed Information Collection: DS-4184, Risk Management and Analysis (RAM)

    2011-10-20

    ..., Risk Management and Analysis (RAM) ACTION: Notice of request for public comments. SUMMARY: The... of 1995. Title of Information Collection: Risk Analysis and Management. OMB Control Number: None.... Methodology: The State Department, is implementing a Risk Analysis and Management Program to vet potential...

  16. The Two Populations of Kisspeptin Neurons Are Involved in the Ram-Induced LH Pulsatile Secretion and LH Surge in Anestrous Ewes.

    Fabre-Nys, Claude; Cognié, Juliette; Dufourny, Laurence; Ghenim, Meriem; Martinet, Stephanie; Lasserre, Olivier; Lomet, Didier; Millar, Robert P; Ohkura, Satoshi; Suetomi, Yuta

    2017-11-01

    Exposure to a ram during spring stimulates luteinizing hormone (LH) secretion and can induce ovulation in sexually quiescent ewes ("ram effect"). Kisspeptin (Kiss) present in the arcuate nucleus (ARC) and the preoptic area (POA) is a potent stimulators of LH secretion. Our aim was to investigate whether Kiss neurons mediate the increase in LH secretion during the ram effect. With double immunofluorescent detection, we identified Kiss neurons (Kiss IR) activated (Fos IR) by exposure to a ram for 2 hours (M2) or 12 hours (M12) or to ewes for 2 hours (C). The density of cells Kiss + Fos IR and the proportion of Kiss IR cells that were also Fos IR cells were higher in M2 and M12 than in C in ARC (P populations of Kiss neurons are involved in the ram-induced pulsatile LH secretion and in the LH surge. Copyright © 2017 Endocrine Society.

  17. The Effects of Ram-pressure Stripping and Supernova Winds on the Tidal Stirring of Disky Dwarfs: Enhanced Transformation into Dwarf Spheroidals

    Kazantzidis, Stelios; Mayer, Lucio; Callegari, Simone; Dotti, Massimo; Moustakas, Leonidas A.

    2017-01-01

    A conclusive model for the formation of dwarf spheroidal (dSph) galaxies still remains elusive. Owing to their proximity to the massive spirals Milky Way (MW) and M31, various environmental processes have been invoked to explain their origin. In this context, the tidal stirring model postulates that interactions with MW-sized hosts can transform rotationally supported dwarfs, resembling present-day dwarf irregular (dIrr) galaxies, into systems with the kinematic and structural properties of dSphs. Using N -body+SPH simulations, we investigate the dependence of this transformation mechanism on the gas fraction, f _g_a_s, in the disk of the progenitor dwarf. Our numerical experiments incorporate for the first time the combined effects of radiative cooling, ram-pressure stripping, star formation, supernova (SN) winds, and a cosmic UV background. For a given orbit inside the primary galaxy, rotationally supported dwarfs with gas fractions akin to those of observed dIrrs ( f _g_a_s ≳ 0.5), demonstrate a substantially enhanced likelihood and efficiency of transformation into dSphs relative to their collisionless ( f _g_a_s = 0) counterparts. We argue that the combination of ram-pressure stripping and SN winds causes the gas-rich dwarfs to respond more impulsively to tides, augmenting their transformation. When f _g_a_s ≳ 0.5, disky dwarfs on previously unfavorable low-eccentricity or large-pericenter orbits are still able to transform. On the widest orbits, the transformation is incomplete; the dwarfs retain significant rotational support, a relatively flat shape, and some gas, naturally resembling transition-type systems. We conclude that tidal stirring constitutes a prevalent evolutionary mechanism for shaping the structure of dwarf galaxies within the currently favored CDM cosmological paradigm.

  18. The Effects of Ram-pressure Stripping and Supernova Winds on the Tidal Stirring of Disky Dwarfs: Enhanced Transformation into Dwarf Spheroidals

    Kazantzidis, Stelios; Mayer, Lucio; Callegari, Simone; Dotti, Massimo; Moustakas, Leonidas A.

    2017-02-01

    A conclusive model for the formation of dwarf spheroidal (dSph) galaxies still remains elusive. Owing to their proximity to the massive spirals Milky Way (MW) and M31, various environmental processes have been invoked to explain their origin. In this context, the tidal stirring model postulates that interactions with MW-sized hosts can transform rotationally supported dwarfs, resembling present-day dwarf irregular (dIrr) galaxies, into systems with the kinematic and structural properties of dSphs. Using N-body+SPH simulations, we investigate the dependence of this transformation mechanism on the gas fraction, f gas, in the disk of the progenitor dwarf. Our numerical experiments incorporate for the first time the combined effects of radiative cooling, ram-pressure stripping, star formation, supernova (SN) winds, and a cosmic UV background. For a given orbit inside the primary galaxy, rotationally supported dwarfs with gas fractions akin to those of observed dIrrs (f gas ≳ 0.5), demonstrate a substantially enhanced likelihood and efficiency of transformation into dSphs relative to their collisionless (f gas = 0) counterparts. We argue that the combination of ram-pressure stripping and SN winds causes the gas-rich dwarfs to respond more impulsively to tides, augmenting their transformation. When f gas ≳ 0.5, disky dwarfs on previously unfavorable low-eccentricity or large-pericenter orbits are still able to transform. On the widest orbits, the transformation is incomplete; the dwarfs retain significant rotational support, a relatively flat shape, and some gas, naturally resembling transition-type systems. We conclude that tidal stirring constitutes a prevalent evolutionary mechanism for shaping the structure of dwarf galaxies within the currently favored CDM cosmological paradigm.

  19. The Effects of Ram-pressure Stripping and Supernova Winds on the Tidal Stirring of Disky Dwarfs: Enhanced Transformation into Dwarf Spheroidals

    Kazantzidis, Stelios [Section of Astrophysics, Astronomy and Mechanics, Department of Physics, National and Kapodistrian University of Athens, 15784 Zografos, Athens (Greece); Mayer, Lucio [Center for Theoretical Astrophysics and Cosmology, Institute for Computational Science, University of Zürich, CH-8057 Zürich (Switzerland); Callegari, Simone [Anthropology Institute and Museum, University of Zürich, CH-8057 Zürich (Switzerland); Dotti, Massimo [Università degli Studi di Milano-Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Moustakas, Leonidas A., E-mail: skazantzidis@phys.uoa.gr [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2017-02-10

    A conclusive model for the formation of dwarf spheroidal (dSph) galaxies still remains elusive. Owing to their proximity to the massive spirals Milky Way (MW) and M31, various environmental processes have been invoked to explain their origin. In this context, the tidal stirring model postulates that interactions with MW-sized hosts can transform rotationally supported dwarfs, resembling present-day dwarf irregular (dIrr) galaxies, into systems with the kinematic and structural properties of dSphs. Using N -body+SPH simulations, we investigate the dependence of this transformation mechanism on the gas fraction, f {sub gas}, in the disk of the progenitor dwarf. Our numerical experiments incorporate for the first time the combined effects of radiative cooling, ram-pressure stripping, star formation, supernova (SN) winds, and a cosmic UV background. For a given orbit inside the primary galaxy, rotationally supported dwarfs with gas fractions akin to those of observed dIrrs ( f {sub gas} ≳ 0.5), demonstrate a substantially enhanced likelihood and efficiency of transformation into dSphs relative to their collisionless ( f {sub gas} = 0) counterparts. We argue that the combination of ram-pressure stripping and SN winds causes the gas-rich dwarfs to respond more impulsively to tides, augmenting their transformation. When f {sub gas} ≳ 0.5, disky dwarfs on previously unfavorable low-eccentricity or large-pericenter orbits are still able to transform. On the widest orbits, the transformation is incomplete; the dwarfs retain significant rotational support, a relatively flat shape, and some gas, naturally resembling transition-type systems. We conclude that tidal stirring constitutes a prevalent evolutionary mechanism for shaping the structure of dwarf galaxies within the currently favored CDM cosmological paradigm.

  20. Solar particle induced upsets in the TDRS-1 attitude control system RAM during the October 1989 solar particle events

    Croley, D.R.; Garrett, H.B.; Murphy, G.B.; Garrard, T.L.

    1995-01-01

    The three large solar particle events, beginning on October 19, 1989 and lasting approximately six days, were characterized by high fluences of solar protons and heavy ions at 1 AU. During these events, an abnormally large number of upsets (243) were observed in the random access memory of the attitude control system (ACS) control processing electronics (CPE) on-board the geosynchronous TDRS-1 (Telemetry and Data Relay Satellite). The RAM unit affected was composed of eight Fairchild 93L422 memory chips. The Galileo spacecraft, launched on October 18, 1989 (one day prior to the solar particle events) observed the fluxes of heavy ions experienced by TDRS-1. Two solid-state detector telescopes on-board Galileo, designed to measure heavy ion species and energy, were turned on during time periods within each of the three separate events. The heavy ion data have been modeled and the time history of the events reconstructed to estimate heavy ion fluences. These fluences were converted to effective LET spectra after transport through the estimated shielding distribution around the TDRS-1 ACS system. The number of single event upsets (SEU) expected was calculated by integrating the measured cross section for the Fairchild 93L422 memory chip with average effective LET spectrum. The expected number of heavy ion induced SEU's calculated was 176. GOES-7 proton data, observed during the solar particle events, were used to estimate the number of proton-induced SEU's by integrating the proton fluence spectrum incident on the memory chips, with the two-parameter Bendel cross section for proton SEU's. The proton fluence spectrum at the device level was gotten by transporting the protons through the estimated shielding distribution. The number of calculated proton-induced SEU's was 72, yielding a total of 248 predicted SEU's, very close to the 243 observed SEU's

  1. Solar Particle Induced Upsets in the TDRS-1 Attitude Control System RAM During the October 1989 Solar Particle Events

    Croley, D. R.; Garrett, H. B.; Murphy, G. B.; Garrard,T. L.

    1995-01-01

    The three large solar particle events, beginning on October 19, 1989 and lasting approximately six days, were characterized by high fluences of solar protons and heavy ions at 1 AU. During these events, an abnormally large number of upsets (243) were observed in the random access memory of the attitude control system (ACS) control processing electronics (CPE) on-board the geosynchronous TDRS-1 (Telemetry and Data Relay Satellite). The RAM unit affected was composed of eight Fairchild 93L422 memory chips. The Galileo spacecraft, launched on October 18, 1989 (one day prior to the solar particle events) observed the fluxes of heavy ions experienced by TDRS-1. Two solid-state detector telescopes on-board Galileo, designed to measure heavy ion species and energy, were turned on during time periods within each of the three separate events. The heavy ion data have been modeled and the time history of the events reconstructed to estimate heavy ion fluences. These fluences were converted to effective LET spectra after transport through the estimated shielding distribution around the TDRS-1 ACS system. The number of single event upsets (SEU) expected was calculated by integrating the measured cross section for the Fairchild 93L422 memory chip with average effective LET spectrum. The expected number of heavy ion induced SEU's calculated was 176. GOES-7 proton data, observed during the solar particle events, were used to estimate the number of proton-induced SEU's by integrating the proton fluence spectrum incident on the memory chips, with the two-parameter Bendel cross section for proton SEU'S. The proton fluence spectrum at the device level was gotten by transporting the protons through the estimated shielding distribution. The number of calculated proton-induced SEU's was 72, yielding a total of 248 predicted SEU'S, very dose to the 243 observed SEU'S. These calculations uniquely demonstrate the roles that solar heavy ions and protons played in the production of SEU

  2. Caracterización de las Reacciones Adversas a Medicamentos (RAMs observadas en una institución asistencial de III nivel de complejidad

    D Arroyo Monterrosa

    2015-07-01

    Full Text Available Resumen – Las Reacciones Adversas a Medicamentos (RAMs constituyen un problema de salud pública, acerca del cual han tomado intervención los organismos de Farmacovigilancia de cada país, no solo mediante su notificación sino también por su prevención y educación en el uso de los medicamentos. Objetivo: Documentar retrospectivamente los reportes de RAMs generados en una Clínica de IV nivel en Barranquilla (Atl., Col. Metodología: Se incluyeron todas los reportes de RAMs identificadas por el personal clínico teniendo en cuenta que el proceso en tiempo real al momento de producirse el informe y el actuar del Químico Farmacéutico. Resultado: En un lapso de 15 meses se reportaron 94 RAMs, con un promedio 6,27±4,35 RAMs por cada mes El género femenino fue quien más presentó RAMs (55,32 %, el grupo etario con mayor reporte fue el de 18-44 años (42,55 %. Las RAM de mayor reporte fueron en cuanto a Gravedad, las Moderadas (58,51%, causalidad las Probadas 37,23% y Evitabilidad las Prevenibles 57,45%. Los fármacos con mayor número de RAM fueron los Anti-infecciosos Vía General 31,9%. El personal de Salud que más reportó RAM fueron las Enfermeras (35,11%. Conclusiones: El alto número de RAM referentes a los antiinfecciosos es posiblemente como una consecuencia a sus amplias indicaciones y alto uso, generando un gran espacio de oportunidad de aprendizaje para el Comité de Infecciones para promover su uso seguro.

  3. Positive effects of melatonin treatment on the reproductive performance of young border leicester rams mated to merino ewes in spring: preliminary observations.

    Kleemann, D O; Kelly, J M; Arney, L J; Farley, I L; Tilbrook, A J; Walker, S K

    2014-12-01

    Poor reproductive performance of Merino ewe flocks when mated to Border Leicester rams during spring may be due to seasonality of the Border Leicester breed. Two approaches were taken to test this assumption. Six young (12 months old) or six mixed-age (12, 24 and ≥36 months old) Border Leicester rams were either treated or not treated with melatonin implants (2 × 2 design) 6 weeks before the four groups of rams were each put with approximately 300 Merino ewes for an 8-week mating period. Implants were inserted in early September (experiment 1). The second approach was to yard or not yard ewes and mixed-age rams on several occasions during the first 3 weeks of the mating period (experiment 2). Pregnancy rate and twinning percentage were assessed by ultrasonography. In experiment 1, melatonin treatment in young rams increased (p pregnancy rate from 5.0% to 92.6%, but mixed-age rams did not respond (90.7% vs 89.5% for melatonin and non-melatonin treatments, respectively). Twinning rate was similar (p > 0.05) for ewes mated to either melatonin or non-melatonin-treated young rams (36.8% vs 40.0%, respectively), whereas melatonin significantly improved (p melatonin treatment, scrotal circumference was greater (p pregnancy rate compared with non-yarded counterparts (89.5% vs 65.5%). Twinning rate was not affected (37.7% vs 36.1%, respectively). In summary, melatonin treatment of Border Leicester rams significantly improved flock reproductive performance in spring due to improved pregnancy rates with young rams and improved litter size with mixed-age rams. © 2014 Commonwealth of Australia.

  4. A risk-based model for maintenance decision support of civil structures using RAMS

    Viana Da Rocha, T. C.; Stipanovic, I.; Hartmann, A.; Bakker, J.

    2017-01-01

    As a cornerstone of transportation asset management, risk-based approaches have been used to support maintenance decisions of civil structures. However, ambiguous and subjective risk criteria and inconsistency on the use of risk-based approaches can lead to a fuzzy understanding of the risks

  5. Comparison of HuRAM+ and HERA for Development of Data Worksheet for Simulator based HERA Databank

    Choi, Sunyoung; Jung, Wondea

    2013-01-01

    We also compared the existing HERA methods and HERA database to select essential data fields. We performed a preliminary study to see the possibility to induce the operator's emergency operating procedure (EOP) noncompliance behaviors under a simulated emergency. The purpose of this paper is to compare the HuRAM + and HERA to obtain an insight into the construction of a data worksheet for a qualitative HERA. In this paper, we performed a case study for applying simulator training data to HuRAM + and HERA. With this insight, as well as the results of the researches mentioned above, we have a plan to develop a systematic and qualitative HERA and a data worksheet for the work. In this paper, we compared HuRAM + and HERA to obtain an insight into the construction of a data worksheet for a qualitative HERA and performed a case study. HERA requires a burden to analyze and input an event data due to too many data fields even though it is well designed to estimate Heaps. It is somewhat more convenient to input data into the HuRAM + ; however, it is difficult to analyze the organization and safety culture factors. We are now trying to develop the framework of a data worksheet for a qualitative HERA based on simulator training data. The purpose of our data worksheet is to provide key information for HEP estimation and to enhance the understanding of an operators' behavior under an off-normal plant status. We aim less encumbered means of obtaining the needed data for HERA by changing the existing data worksheet framework of HuRAM + and HERA and by reducing data fields that require reading the between the lines

  6. Subsequent influences of feeding intact green seaweed Ulva lactuca to growing lambs on the seminal and testicular characteristics in rams.

    Samara, E M; Okab, A B; Abdoun, K A; El-Waziry, A M; Al-Haidary, A A

    2013-12-01

    The present experiment was designed to investigate the subsequent influences of supplementing different levels of intact green seaweed Ulva lactuca (0%, 3%, and 5% DM) to growing sexually immature lambs during the growth period (74 d) on the seminal and testicular characteristics of sexually mature rams. Ulva lactuca was manually collected, adequately prepared, and then incorporated into lambs' diets. Eighteen male 3-mo-old lambs of the Awassi breed with a mean BW of 22.57 kg (SD = 1.08) were randomly assigned into treatments. The obtained results indicate that offering Ulva lactuca at the level of 3% or 5% DM to lambs during the growth period had no subsequent impacts (P > 0.05) on liver and kidney functions as well as blood water balance in rams, thereby suggesting that Ulva lactuca can be safely supplemented to lambs during growing. However, our findings point out that feeding a lamb diet supplemented with intact Ulva lactuca failed to demonstrate any subsequent benefit (P > 0.05) on the growth performance, thermoregulatory responses, and plasma oxidative status in rams. Above all, it was clearly evident that supplementing intact Ulva lactuca to lambs had demonstrated subsequent negative influences (P Ulva lactuca during the growth period compared to control rams. The deleterious impacts of feeding intact Ulva lactuca on spermatogenesis and germ cell loss were proven to be attributed to the dysfunction of Sertoli cells. Collectively, these results provide novel insights on the subsequent influences of dietary supplementation of intact Ulva lactuca to lambs. The consistent evidence of profound negative impacts on seminal and testicular characteristics as well as the resulting data of no improvement of subsequent growth, thermoregulation, and plasma oxidative status in rams prompts us to tentatively recommend the avoidance of feeding intact Ulva lactuca to lambs.

  7. Prototyping global Earth System Models at high resolution: Representation of climate, ecosystems, and acidification in Eastern Boundary Currents

    Dunne, J. P.; John, J. G.; Stock, C. A.

    2013-12-01

    The world's major Eastern Boundary Currents (EBC) such as the California Current Large Marine Ecosystem (CCLME) are critically important areas for global fisheries. Computational limitations have divided past EBC modeling into two types: high resolution regional approaches that resolve the strong meso-scale structures involved, and coarse global approaches that represent the large scale context for EBCs, but only crudely resolve only the largest scales of their manifestation. These latter global studies have illustrated the complex mechanisms involved in the climate change and acidification response in these regions, with the CCLME response dominated not by local adjustments but large scale reorganization of ocean circulation through remote forcing of water-mass supply pathways. While qualitatively illustrating the limitations of regional high resolution studies in long term projection, these studies lack the ability to robustly quantify change because of the inability of these models to represent the baseline meso-scale structures of EBCs. In the present work, we compare current generation coarse resolution (one degree) and a prototype next generation high resolution (1/10 degree) Earth System Models (ESMs) from NOAA's Geophysical Fluid Dynamics Laboratory in representing the four major EBCs. We review the long-known temperature biases that the coarse models suffer in being unable to represent the timing and intensity of upwelling-favorable winds, along with lack of representation of the observed high chlorophyll and biological productivity resulting from this upwelling. In promising contrast, we show that the high resolution prototype is capable of representing not only the overall meso-scale structure in physical and biogeochemical fields, but also the appropriate offshore extent of temperature anomalies and other EBC characteristics. Results for chlorophyll were mixed; while high resolution chlorophyll in EBCs were strongly enhanced over the coarse resolution

  8. Meso- and Micro-scale Modelling in China: Wind atlas analysis for 12 meteorological stations in NE China (Dongbei)

    Mortensen, Niels Gylling; Yang, Z.; Hansen, Jens Carsten

    As part of the “Meso-Scale and Micro-Scale Modelling in China” project, also known as the CMA component of the Sino-Danish Wind Energy Development Programme (WED), microscale modelling and analyses have been carried out for 12 meteorological stations in NE China. Wind speed and direction data from...... the twelve 70-m masts have been analysed using the Wind Atlas Analysis and Application Program (WAsP 10). The wind-climatological inputs are the observed wind climates derived from the WAsP Climate Analyst. Topographical inputs are elevation maps constructed from SRTM 3 data and roughness length maps...... constructed from Google Earth satellite imagery. The maps have been compared to Chinese topographical maps and adjusted accordingly. Summaries are given of the data measured at the 12 masts for the reference period 2009. The main result of the microscale modelling is an observational wind atlas for NE China...

  9. Model Calculations of Changes in Tropospheric Ozone Over Europe and the Role of Surface Sources and Aircraft Emissions

    Hov, Oe [Bergen Univ. (Norway)

    1996-01-01

    This conference paper deals with a study of the impact of various sources of NO{sub x} on the ozone production in the free troposphere. A comprehensive two-dimensional zonally averaged chemistry/transport model and a three-dimensional meso-scale chemical transport (MCT) model are used in the study. Using the two-dimensional model, three surches of NO{sub x} in the upper troposphere were examined covering NO{sub x} produced by lightening, NO{sub x} (and NO{sub y}) brought to the upper troposphere from the planetary boundary layer by rapid vertical transport processes, and NO{sub x} emitted from aircraft. 4 refs.

  10. Energy efficiency of growing ram lambs fed concentrate-based diets with different roughage sources.

    Galvani, D B; Pires, A V; Susin, I; Gouvêa, V N; Berndt, A; Chagas, L J; Dórea, J R R; Abdalla, A L; Tedeschi, L O

    2014-01-01

    Poor-quality roughages are widely used as fiber sources in concentrate-based diets for ruminants. Because roughage quality is associated with the efficiency of energy use in forage-based diets, the objective of this study was to determine whether differing the roughage source in concentrate-based diets could change the energy requirements of growing lambs. Eighty-four 1/2 Dorper × 1/2 Santa Inês ram lambs (18.0 ± 3.3 kg BW) were individually penned and divided into 2 groups according to primary source of dietary roughage: low-quality roughage (LQR; sugarcane bagasse) or medium-quality roughage (MQR; coastcross hay). Diets were formulated to be isonitrogenous (2.6% N) and to meet 20% of physically effective NDF. After a 10-d ad libitum adaptation period, 7 lambs from each group were randomly selected and slaughtered (baseline). Twenty-one lambs in each diet group were fed ad libitum and slaughtered at 25, 35, or 45 kg BW. The remaining 28 lambs (14 from each diet group) were submitted to 1 of 2 levels of feed restriction: 70% or 50% of the ad libitum intake. Retentions of body fat, N, and energy were determined. Additionally, 6 ram lambs (44.3 ± 5.6 kg BW) were kept in metabolic cages and used in a 6 × 6 Latin square experiment designed to establish the ME content of the 2 diets at the 3 levels of DM intake. There was no effect of intake level on diet ME content, but it was greater in the diet with LQR than in the diet with MQR (3.18 vs. 2.94 Mcal/kg, respectively; P energy concentrations (kcal/kg of empty BW) because of a larger visceral fat deposition (P source of forage in a concentrate-based diet for growing lambs did not change NEm and the efficiency of ME use for maintenance, which averaged 71.6 kcal/kg(0.75) of shrunk BW and 0.63, respectively. On the other hand, the greater nonfibrous carbohydrate content of the diet with LQR resulted in a 17% better efficiency of ME use for gain (P energy retention as fat (P < 0.01). This increased nutritional

  11. Fos Expression in the Olfactory Pathway of High- and Low-Sexually Performing Rams Exposed to Urine from Estrous or Ovariectomized Ewes

    Mirto, AJ; Austin, KJ; Uthlaut, VA; Roselli, CE; Alexander, BM

    2015-01-01

    Exposure to estrous ewe urine stimulates investigation and mounting activity in sexually active but not sexually inactive rams. It was hypothesized sexual indifference may result from an inability to detect olfactory cues or an interruption of the pathway from detection of the olfactory stimulus to the motor response. Sexually active (n=4) and inactive (n=3) rams were exposed to urine from estrous ewes. An additional group of sexually active rams (n=3) were exposed to urine from ovariectomized ewes. Rams were exsanguinated following 1 h of exposure to stimulus. Neural activity was determined in tissues of interest by the presence of fos and fos-related proteins detected by immunohistochemistry procedures. Sexually active rams exposed to urine from ovariectomized ewes had more (P ≤ 0.05) fos-positive cells in the olfactory bulb, but fewer (P = 0.03) fos-positive cells in the cortical amygdala compared to sexually active rams exposed to urine from estrous ewes. Sexually inactive rams had similar (P ≥ 0.13) numbers of fos positive neurons in the olfactory bulb and medial amygdala but fewer (P ≤ 0.04) in the central amygdala, bed nucleus of the stria terminalis and the medial preoptic area compared to sexually active rams exposed to urine from estrous ewes. Sexual inactivity was not associated with decreased hypothalamic function since fos activity was similar (P ≥ 0.14) among groups in the suprachiasmatic and ventral medial nucleus. Sexual inactivity is not likely due to an impaired ability to detect or process olfactory stimuli by the main olfactory bulb and medial-cortical amygdala. Sexually inactive rams may have reduced attentiveness to sexual stimuli and/or decreased responsiveness of regions in the brain which regulate reproductive behaviors. PMID:28348447

  12. Quasi-open loop hydraulic ram incremental actuator with power conserving properties

    Raymond, E.T.; Robinson, C.W.

    1982-01-01

    An electric stepping motor, operated by command signals from a computer or a microprocessor, rotates a rotary control member of a distributor valve, for sequencing hydraulic pressure and hence flow to the cylinders of an axial piston hydraulic machine. A group of the cylinders are subjected to pressure and flow and the remaining cylinders are vented to a return line. Rotation of the rotary control valve member sequences pressurization by progressively adding a cylinder to the forward edge to the pressurized group and removing a cylinder from the trailing edge of the pressurized group. The double ended pistons of each new pressurized group function to drive a wobble plate into a new position of equilibrium and then hold it in such position until another change in the makeup of the pressurized group. These pistons also displace hydraulic fluid from the opposite cylinder head which serves as the output of a pumping element. An increment of displacement of the wobble plate occurs in direct response to each command pulse that is received by the stepping motor. Wobble plate displacement drives the rotary valve of the hydraulic power transfer unit, causing it to transfer hydraulic fluid from a first expansible chamber on one side of a piston in a hydraulic ram to a second expansible chamber on the opposite side of the piston. Reverse drive of the hydraulic power transfer unit reverses the direction of transfer of hydraulic fluid between the two expansible chambers

  13. Historias de dictadura. Primeros cuentos de Sergio Ramírez

    María del Pilar Ríos

    2017-07-01

    Full Text Available Los primeros textos del escritor nicaragüense Sergio Ramírez presentan algunos elementos que conforman, a manera de mosaico, los principales rasgos de la vida individual y social durante la larga dictadura somocista (1936 – 1979. Poder, violencia, dependencia política, social y económica son algunas de las problemáticas que asoman y su tratamiento se acentúa o modifica entre una publicación y otra más allá del orden de aparición. Asimismo, en el marco de las luchas por la liberación encabezadas por el Frente Sandinista de Liberación Nacional (FSLN, se cuestiona la función del arte y del intelectual. Propongo una serie de cuentos incluidos en Cuentos (1963, Nuevos Cuentos (1969 y Charles Atlas también muere (1976 en la que reviso, en primera instancia, la postura en torno al arte y al intelectual que exponen mediante la autofiguración del autor. Luego, exploro algunos elementos que conforman esos mundos narrativos y que funcionan como denuncia político-social al mismo tiempo que imaginan y reivindican una nueva nación en sintonía con los postulados presentes en las luchas revolucionarias.

  14. The effect of cargo on the crush loading of RAM transportation packages in ship collisions

    Radloff, H.D.; Ammerman, D.J.

    1998-03-01

    Recent intercontinental radioactive material shipping campaigns have focused public and regulatory attention on the safety of transport of this material by ocean-going vessels. One major concern is the response of the vessel and onboard radioactive material (RAM) packages during a severe ship-to-ship collision. These collisions occur at velocities less than the velocity obtained in the Type B package regulatory impact event and the bow of the striking ship is less rigid than the unyielding target used in those tests (Ammerman and Daidola, 1996). This implies that ship impact is not a credible scenario for damaging the radioactive material packages during ship collisions. It is possible, however, for these collisions to generate significant amounts of crush force by the bow of the impacting ship overrunning the package. It is the aim of this paper to determine an upper bound on the magnitude of this crush force taking into account the strength of the radioactive material carrying vessel and any other cargo that may be stowed in the same hold as the radioactive material

  15. The MONOS memory transistor: application in a radiation-hard nonvolatile RAM

    Brown, W.D.

    1985-01-01

    The MONOS (metal-oxide-nitride-oxide-silicon) device is a prime candidate for use as the nonvolatile memory element in a radiation-hardened RAM (random-access memory). The endurance, retention and radiation properties of MONOS memory transistors have been studied as a function of post nitride deposition annealing. Following the nitride layer deposition, all devices were subjected to an 800 0 C oxidation step and some were then annealed at 900 0 C in nitrogen. The nitrogen anneal produces an increase in memory window size of approximately 40%. The memory window center of the annealed devices is shifted toward more positive voltages and is more stable with endurance cycling. Endurance cycling to 10 9 cycles produces a 20% increase in memory window size and a 60% increase in decay rate. For a radiation total dose of 10 6 rads (Si), the memory window size is essentially unchanged and the decay rate increases approximately 13%. A combination of 10 9 cycles and 10 6 rads (Si) reduces the decades of retention (in sec) from 6.3 to 4.3 for a +- 23-V 16-μsec write/erase pulse. (author)

  16. ramón de la sagra: early spanish socialism and educational reform

    Antón Costa Rico

    2008-04-01

    Full Text Available The present contribution analyses the figure of the ideologist, social theoretician, economist and international comparative education scholar, Ramón de la Sagra (1798-1871. Originally from Galicia and having begun his university studies in Santiago, he soon moved to Madrid, where he would become one of the founders of the Ateneo. University professor and naturalist in Havana. Observer of social reforms in the U.S.A. (1835. Later, he travelled through Europe comparing various attempts at social reform. Writer. Scholar and propagator, as well as a keen attender at intellectual salons, alongside Arhens, Cousin, Hippolyte Colins, Engels, or Proudhon (with whom he was involved in a variety of social undertakings in Paris between 1848 to 1849, as well as other well-known characters in the field of political economy and of social theory. Liberal Spanish member of parliament. Promoter of the first infant schools in Madrid (1839-1842. An idealistic reformer: an attractive and complex figure. One of the most outstanding Spanish intellectuals of the 19th Century but until now largely unknown.

  17. Juan Ramón Jiménez and Nietzsche

    John P. Devlin

    1983-01-01

    Full Text Available The young Juan Ramón Jiménez shared the enthusiasm for the writings of Nietzsche prevalent among his contemporaries. More significant are the interest in and affinity with Nietzsche which persisted into the poet's maturity. Jiménez found in Nietzsche not only a man of ideas but a poet who claimed to be a potent spiritual force. Both writers held that the modern age could recover a sense of spiritual integrity through the will of the individual to live and interpret human existence as an aesthetic phenomenon. Nietzsche's views on the nature of art and the role of the artist helped to sustain Jiménez' exalted and elitist view of poetry and the poet's mission. Jiménez felt an ethical kinship with the philosopher who asserted the absolute uniqueness of the creative individual, the end of whose existence was self-realization through his art. Nietzsche's doctrine of heroic vitalism as an antidote to chronic spiritual malaise corresponds to Jiménez' revitalized vision of the poetic word proclaimed in the Diario and elaborated in subsequent verse and prose writings.

  18. Enhanced production of prodigiosin by Serratia marcescens MO-1 using ram horn peptone

    Esabi Basaran Kurbanoglu

    2015-06-01

    Full Text Available This work addresses the production of prodigiosin from ram horn peptone (RHP using MO-1, a local isolate in submerged culture. First, a novel gram-negative and rod-shaped bacterial strain, MO-1, was isolated from the body of the grasshopper (Poecilemon tauricola Ramme 1951, which was collected from pesticide-contaminated fields. Sequence analysis of 16S rDNA classified the microbe as Serratia marcescens. The substrate utilization potential (BIOLOG and fatty acid methyl ester profile (FAME of S. marcescens were also determined. The effect of RHP on the production of prodigiosin by S. marcescens MO-1 was investigated, and the results showed that RHP supplementation promoted the growth of MO-1 and increased the production of prodigiosin. A concentration of 0.4% (w/v RHP resulted in the greatest yield of prodigiosin (277.74 mg/L after 48 h when mannitol was used as the sole source of carbon. The pigment yield was also influenced by the types of carbon sources and peptones. As a result, RHP was demonstrated to be a suitable substrate for prodigiosin production. These results revealed that prodigiosin could be produced efficiently by S. marcescens using RHP.

  19. Enhanced production of prodigiosin by Serratia marcescens MO-1 using ram horn peptone.

    Kurbanoglu, Esabi Basaran; Ozdal, Murat; Ozdal, Ozlem Gur; Algur, Omer Faruk

    2015-06-01

    This work addresses the production of prodigiosin from ram horn peptone (RHP) using MO-1, a local isolate in submerged culture. First, a novel gram-negative and rod-shaped bacterial strain, MO-1, was isolated from the body of the grasshopper (Poecilemon tauricola Ramme 1951), which was collected from pesticide-contaminated fields. Sequence analysis of 16S rDNA classified the microbe as Serratia marcescens. The substrate utilization potential (BIOLOG) and fatty acid methyl ester profile (FAME) of S. marcescens were also determined. The effect of RHP on the production of prodigiosin by S. marcescens MO-1 was investigated, and the results showed that RHP supplementation promoted the growth of MO-1 and increased the production of prodigiosin. A concentration of 0.4% (w/v) RHP resulted in the greatest yield of prodigiosin (277.74 mg/L) after 48 h when mannitol was used as the sole source of carbon. The pigment yield was also influenced by the types of carbon sources and peptones. As a result, RHP was demonstrated to be a suitable substrate for prodigiosin production. These results revealed that prodigiosin could be produced efficiently by S. marcescens using RHP.

  20. Block RAM-based architecture for real-time reconfiguration using Xilinx® FPGAs

    Rikus le Roux

    2015-07-01

    Full Text Available Despite the advantages dynamic reconfiguration adds to a system, it only improves system performance if the execution time exceeds the configuration time. As a result, dynamic reconfiguration is only capable of improving the performance of quasi-static applications. In order to improve the performance of dynamic applications, researchers focus on improving the reconfiguration throughput. These approaches are mostly limited by the bus commonly used to connect the configuration controller to the memory, which contributes to the configuration time. A method proposed to ameliorate this overhead is an architecture utilizing localised block RAM (BRAM connected to the configuration controller to store the configuration bitstream. The aim of this paper is to illustrate the advantages of the proposed architecture, especially for reconfiguring real-time applications. This is done by validating the throughput of the architecture and comparing this to the maximum theoretical throughput of the internal configuration access port (ICAP. It was found that the proposed architecture is capable of reconfiguring an application within a time-frame suitable for real-time reconfiguration. The drawback of this method is that the BRAM is extremely limited and only a discrete set of configurations can be stored. This paper also proposes a method on how this can be mitigated without affecting the throughput.

  1. Knitted radar absorbing materials (RAM) based on nickel–cobalt magnetic materials

    Teber, Ahmet; Unver, Ibrahim; Kavas, Huseyin; Aktas, Bekir; Bansal, Rajeev

    2016-01-01

    There has been a long-standing interest in the development of flexible, lightweight, thin, and reconfigurable radar absorbing materials (RAM) for military applications such as camouflaging ground-based hardware against airborne radar observation. The use of polymeric Polyacrylonitrile (PAN) fabrics as a host matrix for magnetic metal nano-particles (either at the yarn-stage or after weaving the fabric) for shielding and absorbing applications has been described in the literature. In our experimental investigation, the relative concentrations of Nickel and Cobalt as well as the coating time are varied with a view to optimizing the microwave absorption characteristics of the resulting PAN-based composite material in the radar-frequency bands (X, K_u, and K). It is found that the PAN samples with the shortest coating time have the best return losses (under −20 dB return loss over a moderate bandwidth). - Graphical abstract: Here, we added the graphical abstract that provides summary the contents of the article in a concise pictorial form. - Highlights: • Flexible lightweight, thin, reconfigurable radar absorbing materials are proposed. • Polyacrylonitrile (PAN) fabrics are coated with nickel, cobalt magnetic materials. • The coating times affects microwave constitutive parameters and absorption. • Microwave absorption measurements were done via transmission line technique. • Microwave absorption is due to dielectric losses rather than magnetic losses.

  2. Effects of diluting medium and holding time on sperm motility analysis by CASA in ram

    Somayeh Mostafapor

    2014-06-01

    Full Text Available The aim of this study was to evaluate the effects of dilution rate and holding time on various motility parameters using computer-assisted sperm analysis (CASA. The semen samples were collected from three Ghezel rams. Samples were diluted in seminal plasma (SP, phosphate-buffered saline (PBS containing 1% bovine serum albumin (BSA and Bioexcell. The motility parameters that computed and recorded by CASA include curvilinear velocity (VCL, straight line velocity (VSL, average path velocity (VAP, straightness (STR, linearity (LIN, amplitude of lateral head displacement (ALH, and beat cross frequency (BCF. In all diluters, there was a decrease in the average of all three parameters of sperms movement velocity as the time passed, but density of this decrease was more intensive in SP. The average of ALH between diluters indicated a significant difference, as it was more in Bioexcell in comparison with the similar amount in SP and PBS. The average of LIN in the diluted sperms in Bioexcell was less than two other diluters in all three times. The motility parameters of the diluted sperms in Bioexcell and PBS indicated an important and considerable difference with the diluted sperms in SP. According to the gained results, the Bioexcell has greater ability in preserving motility of sperm in comparison with the other diluters but as SP is considered as physiological environment for sperm. It seems that the evaluation of the motility parameters in Bioexcell and PBS cannot be an accurate and comparable evaluation with SP.

  3. Mitigation of cesium and cobalt contamination on the surfaces of RAM packages

    Krumhansl, J.; Bonhomme, F.; McConnell, P.; Kapoor, A.

    2004-01-01

    Techniques for mitigating the adsorption of 137 Cs and 60 Co on metal surfaces (e.g., RAM packages) exposed to contaminated water (e.g., spent-fuel pools) has been developed and experimentally verified. The techniques are also effective in removing some of the 60 Co and 137 Cs that may have been adsorbed on the surfaces after removal from the contaminated water. The principle for the 137 Cs mitigation technique is based upon ion-exchange processes. In contrast, 60 Co contamination primarily resides in minute particles of CRUD that become lodged on cask surfaces. CRUD is an insoluble Fe-Ni-Cr oxide that forms colloidal-sized particles as stainless steels corrode. Because of the similarity between Ni +2 and Co +2 , CRUD is able to scavenge and retain traces of cobalt as it forms. A number of organic compounds have a great specificity for combining with nickel and cobalt. Ongoing research is investigating the effectiveness of chemical complexing agent, EDTA, with regard to its ability to dissolve the host phase (CRUD) thereby liberating the entrained 60Co into a solution where it can be rinsed away

  4. Effects of diluting medium and holding time on sperm motility analysis by CASA in ram.

    Mostafapor, Somayeh; Farrokhi Ardebili, Farhad

    2014-01-01

    The aim of this study was to evaluate the effects of dilution rate and holding time on various motility parameters using computer-assisted sperm analysis (CASA). The semen samples were collected from three Ghezel rams. Samples were diluted in seminal plasma (SP), phosphate-buffered saline (PBS) containing 1% bovine serum albumin (BSA) and Bioexcell. The motility parameters that computed and recorded by CASA include curvilinear velocity (VCL), straight line velocity (VSL), average path velocity (VAP), straightness (STR), linearity (LIN), amplitude of lateral head displacement (ALH), and beat cross frequency (BCF). In all diluters, there was a decrease in the average of all three parameters of sperms movement velocity as the time passed, but density of this decrease was more intensive in SP. The average of ALH between diluters indicated a significant difference, as it was more in Bioexcell in comparison with the similar amount in SP and PBS. The average of LIN in the diluted sperms in Bioexcell was less than two other diluters in all three times. The motility parameters of the diluted sperms in Bioexcell and PBS indicated an important and considerable difference with the diluted sperms in SP. According to the gained results, the Bioexcell has greater ability in preserving motility of sperm in comparison with the other diluters but as SP is considered as physiological environment for sperm. It seems that the evaluation of the motility parameters in Bioexcell and PBS cannot be an accurate and comparable evaluation with SP.

  5. Knitted radar absorbing materials (RAM) based on nickel–cobalt magnetic materials

    Teber, Ahmet, E-mail: aht10003@engr.uconn.edu [Department of Electrical and Computer Engineering, University of Connecticut, Storrs, CT 06269 (United States); Unver, Ibrahim, E-mail: iunver@gtu.edu.tr [Department of Physics, Gebze Technical University, Kocaeli 41400 (Turkey); Kavas, Huseyin, E-mail: huseyin.kavas@medeniyet.edu.tr [Department of Physics, Istanbul Medeniyet University, Istanbul 34000 (Turkey); Aktas, Bekir, E-mail: aktas@gtu.edu.tr [Department of Physics, Gebze Technical University, Kocaeli 41400 (Turkey); Bansal, Rajeev, E-mail: rajeev@engr.uconn.edu [Department of Electrical and Computer Engineering, University of Connecticut, Storrs, CT 06269 (United States)

    2016-05-15

    There has been a long-standing interest in the development of flexible, lightweight, thin, and reconfigurable radar absorbing materials (RAM) for military applications such as camouflaging ground-based hardware against airborne radar observation. The use of polymeric Polyacrylonitrile (PAN) fabrics as a host matrix for magnetic metal nano-particles (either at the yarn-stage or after weaving the fabric) for shielding and absorbing applications has been described in the literature. In our experimental investigation, the relative concentrations of Nickel and Cobalt as well as the coating time are varied with a view to optimizing the microwave absorption characteristics of the resulting PAN-based composite material in the radar-frequency bands (X, K{sub u}, and K). It is found that the PAN samples with the shortest coating time have the best return losses (under −20 dB return loss over a moderate bandwidth). - Graphical abstract: Here, we added the graphical abstract that provides summary the contents of the article in a concise pictorial form. - Highlights: • Flexible lightweight, thin, reconfigurable radar absorbing materials are proposed. • Polyacrylonitrile (PAN) fabrics are coated with nickel, cobalt magnetic materials. • The coating times affects microwave constitutive parameters and absorption. • Microwave absorption measurements were done via transmission line technique. • Microwave absorption is due to dielectric losses rather than magnetic losses.

  6. Un narrador insolidario: el caso de Junta de acreedores de julio Ramón Ribeyro

    Jorge Valenzuela Garcés

    2011-05-01

    Full Text Available Se analiza al narrador en el cuento “Junta de acreedores” de Julio Ramón Ribeyro incluido en su primer libro Los gallinazos sin plumas. Nuestro propósito es probar que, por lo menos, en este cuento, el autor se aleja de la prédica neorrealista que la crítica le ha atribuido hasta ahora. Cuestionandoeste lugar común, proponemos una nueva lectura que descubre en el texto la defensa implícita de un sistema que valora positivamente la fortaleza de aquellos que saben adaptarse al cambio, frente a los que son vistos como incapaces de tal adaptación (las llamadas víctimas sociales reivindicadas por los neorrealistas. Finalmente se trabaja con un conceptoque críticos como James Higgins utilizan para juzgar los cuentos de Ribeyro: la inhumanidad del sistema. Aquí observamos cómo este concepto entra en crisis al ser aplicado al cuento, sobre todo cuando constatamos que en él,a través del narrador, hay una burla irónica contra el comportamiento de los más débiles. Palabras claves: Ribeyro, neorrealismo, narrador, inhumanidad del sistema.

  7. Molecular characterization with random amplified microsatellites (RAMs of Inchi (Caryodendron orinocense K.

    Ana Cruz Morillo Coronado

    2015-01-01

    Full Text Available The Inchi or Cacay (Caryodendron orinocense Karsten is one of the most promising species of the Amazon and Orinoco Colombian. The main product of Cacay are its almonds, from extracted oil cosmetic, phytotherapeutic and food applications, also has a high content of antioxidants such as Omega 3, 6 and 9 and vitamins like A and E. There are no studies on the molecular characterization of this plant genetic resource; therefore the objective of this research was to characterize the genetic diversity using Random Amplified Microsatellite markers (RAMs. The similarity analysis to 0.50 formed four groups according to geographical location, being materials from Putumayo, Cacayal 19, Pauna and Castilla lowest similarity. Estimated heterozygosity values were 0.16 and 0.28 for the primers CGA and GT, respectively. The percentage of polymorphic loci ranged from 55% for the primer CGA and 90% for the GT. The average Fst value for the 27 materials studied was 0.35, showing the space-temporal dynamics of materials Caryodendron tend toward genetic differentiation, due to their own evolutionary processes and domestication incidence.

  8. SIGNIFICANT ENHANCEMENT OF H{sub 2} FORMATION IN DISK GALAXIES UNDER STRONG RAM PRESSURE

    Henderson, Benjamin; Bekki, Kenji [ICRAR, M468, The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009 (Australia)

    2016-05-10

    We show for the first time that H{sub 2} formation on dust grains can be enhanced in disk galaxies under strong ram pressure (RP). We numerically investigate how the time evolution of H i and H{sub 2} components in disk galaxies orbiting a group/cluster of galaxies can be influenced by the hydrodynamical interaction between the gaseous components of the galaxies and the hot intracluster medium. We find that compression of H i caused by RP increases H{sub 2} formation in disk galaxies before RP rapidly strips H i, cutting off the fuel supply and causing a drop in H{sub 2} density. We also find that the level of this H{sub 2} formation enhancement in a disk galaxy under RP depends on the mass of its host cluster dark matter halo, the initial positions and velocities of the disk galaxy, and the disk inclination angle with respect to the orbital plane. We demonstrate that dust growth is a key factor in the evolution of the H i and H{sub 2} mass in disk galaxies under strong RP. We discuss how the correlation between H{sub 2} fractions and surface gas densities of disk galaxies evolves with time in the galaxies under RP. We also discuss whether galaxy-wide star formation rates (SFRs) in cluster disk galaxies can be enhanced by RP if the SFRs depend on H{sub 2} densities.

  9. TSKT-ORAM: A Two-Server k-ary Tree Oblivious RAM without Homomorphic Encryption

    Jinsheng Zhang

    2017-09-01

    Full Text Available This paper proposes TSKT-oblivious RAM (ORAM, an efficient multi-server ORAM construction, to protect a client’s access pattern to outsourced data. TSKT-ORAM organizes each of the server storages as a k-ary tree and adopts XOR-based private information retrieval (PIR and a novel delayed eviction technique to optimize both the data query and data eviction process. TSKT-ORAM is proven to protect the data access pattern privacy with a failure probability of 2 - 80 when system parameter k ≥ 128 . Meanwhile, given a constant-size local storage, when N (i.e., the total number of outsourced data blocks ranges from 2 16 – 2 34 , the communication cost of TSKT-ORAM is only 22–46 data blocks. Asymptotic analysis and practical comparisons are conducted to show that TSKT-ORAM incurs lower communication cost, storage cost and access delay in practical scenarios than the compared state-of-the-art ORAM schemes.

  10. Hindu Nationalism and the (Not So Easy Art of Being OutragedThe Ram Setu Controversy

    Christophe Jaffrelot

    2008-12-01

    Full Text Available Hindu nationalists have become experts in the art of being outraged after the crystallization of the Hindutva ideology in the 1920s. Articulating a deep rooted inferiority complex, they have tried hard to denounce the disrespectful behaviour of the minorities they feared most – especially the Muslims – in order to mobilize new followers. Such a process was likely to trigger riots and to polarise society along communal lines – and eventually to translate into votes. However, a purely instrumentalist interpretation of the Hindu nationalist use of outrage would be too simplistic. The use of sacred symbols is not that easy, as evident from the case of the Ram Setu movement. It shows that the Sangh Parivar finds it more difficult to mobilize followers when the culprits are not Muslims. It also shows that the exploitation of the outrage is more complicated when its instigators are born Hindus. In any case, the holy character of the outraged symbol is not enough: it has to be historical; and it has to be useful too.

  11. A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts

    Hao, Wenfeng; Liu, Ye; Huang, Xinrong; Liu, Yinghua; Zhu, Jianguo

    2018-06-01

    In this work, the elastic constants of 3D four directional cylindrical braided composite shafts were predicted using analytical and numerical methods. First, the motion rule of yarn carrier of 3D four directional cylindrical braided composite shafts was analyzed, and the horizontal projection of yarn motion trajectory was obtained. Then, the geometry models of unit-cells with different braiding angles and fiber volume contents were built up, and the meso-scale models of 3D cylindrical braided composite shafts were obtained. Finally, the effects of braiding angles and fiber volume contents on the elastic constants of 3D braided composite shafts were analyzed theoretically and numerically. These results play a crucial role in investigating the mechanical properties of 3D 4-directional braided composites shafts.

  12. Ethylene glycol, but not DMSO, could replace glycerol inclusion in soybean lecithin-based extenders in ram sperm cryopreservation.

    Najafi, Abouzar; Daghigh-Kia, Hossein; Dodaran, Hossein Vaseghi; Mehdipour, Mahdieh; Alvarez-Rodriguez, Manuel

    2017-02-01

    The aim of this study was to evaluate the effects of glycerol, ethylene glycol or DMSO in a soybean lecithin extender for freezing ram semen. In this study, 20 ejaculates were collected from four Ghezel rams and diluted with soybean lecithin extender with glycerol (7%), ethylene glycol (3%, 5% and 7%) or DMSO (3%, 5% and 7%). Sperm motility (CASA), membrane integrity (HOS test), viability, total abnormality, mitochondrial activity (Rhodamine 123) and apoptotic features (Annexin V/Propidium iodide) were assessed after thawing. There was no significant difference between glycerol and ethylene glycol at different concentrations (3% and 5%) regarding sperm total and progressive motility, viability, and membrane integrity. The least percentages of mitochondrial functionality were observed in samples frozen with all different DMSO concentrations tested (Plecithin extender. We propose that glycerol in a soybean lecithin based extender could be replaced by ethylene glycol at 3% or 5% concentrations. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Protective effects of Opuntia ficus-indica extract on ram sperm quality, lipid peroxidation and DNA fragmentation during liquid storage.

    Allai, Larbi; Druart, Xavier; Öztürk, Mehmet; BenMoula, Anass; Nasser, Boubker; El Amiri, Bouchra

    2016-12-01

    The present study aimed to assess the phenolic composition of the acetone extract from Opuntia ficus indica cladodes (ACTEX) and its effects on ram semen variables, lipid peroxidation and DNA fragmentation during liquid storage at 5°C for up to 72h in skim milk and Tris egg yolk extenders. Semen samples from five rams were pooled extended with Tris-egg yolk (TEY) or skim milk (SM) extenders containing ACTEX (0%, 1%, 2%, 4% and 8%) at a final concentration of 0.8×10 9 sperm/ml and stored for up to 72h at 5°C. The sperm variables were evaluated at different time periods (8, 24, 48 and 72h). Sperm total motility and viability were superior in TEY than in SM whereas the progressive motility, membrane integrity, abnormality and spontaneous lipid peroxidation were greater in SM compared to TEY (P<0.05). The results also indicated that the inclusion of 1% ACTEX in the SM or TEY extender increased the sperm motility, viability, membrane integrity, and decreased the abnormality, lipids peroxidation up to 72h in storage compared to control group. Similarly, even at 72h of storage, 1% ACTEX can efficiently decrease the negative effects of liquid storage on sperm DNA fragmentation (P<0.05). In conclusion, SM and TEY supplemented with 1% of ACTEX can improve the quality of ram semen. Further studies are required to identify the active components in ACTEX involved in its effect on ram sperm preservation. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. THE PROPORTION OF X AND Y SPERM, VIABILITY AND MOTILITY OF RAM SPERMATOZOA AFTER SEPARATED WITH WHITE EGG ALBUMIN

    Moh Takdir

    2017-02-01

    The aim of this research was to determine the proportion, viability and motility of X and Y ram spermatozoa separated with egg white albumin. Sperm samples derived from Garut ram, which was collected by using an artificial vagina. Observations were made on spermatozoa fraction above and below each medium fraction treatment. There are treatment egg white albumin as separation medium, each medium consisting of fractions top and bottom fraction with different concentration: 1 P0 = sperma before separation (control; 2 P1 = 10% above fraction + 30% lower fraction; P2 = 25% + 45%; P3 = 25% + 75%. Data proportion of X and Y, viability and motility were analyzed statistically by Completely Randomized Design patern in the direction followed by Duncan’s Multiple Range Test for data with a real difference. Separation with egg white albumin affect significantly increased the proportion of spermatozoa X and Y (P≤0.05, but tends to decrease the viability and motility of spermatozoa.The proportion of spermatozoa X and Y was highest in treatment P3,76.76% of spermatozoa X (fraction above 25% and 79.81% spermatozoa Y (75% lower fraction, with an average viability obtained respectively 68,9% (fraction above and 59,7% (bottom fraction, motility 77,5% (fraction above dan 84,0% (bottom fraction. It was concluded that the egg white albumin is very effective in changing the proportions of X and Y ram sperm with the quality of spermatozoa after separation feasible for applications insemination or processed into frozen semen.   (Keywords: Garut ram, White egg albumin, Spermatozoa X and Y

  15. The New S-RAM Air Variable Compressor/Expander for Heat Pump and Waste Heat to Power Application

    Dehoff, Ryan R [ORNL; Jestings, Lee [S-RAM Dynamics; Conde, Ricardo [S-RAM Dynamics

    2016-05-23

    S-RAM Dynamics (S-RAM) has designed an innovative heat pump system targeted for commercial and industrial applications. This new heat pump system is more efficient than anything currently on the market and utilizes air as the refrigerant instead of hydrofluorocarbon (HFC) refrigerants, leading to lower operating costs, minimal environmental costs or concerns, and lower maintenance costs. The heat pumps will be manufactured in the United States. This project was aimed at determining the feasibility of utilizing additive manufacturing to make the heat exchanger device for the new heat pump system. ORNL and S-RAM Dynamics collaborated on determining the prototype performance and subsequently printing of the prototype using additive manufacturing. Complex heat exchanger designs were fabricated using the Arcam electron beam melting (EBM) powder bed technology using Ti-6Al-4V material. An ultrasonic welding system was utilized in order to remove the powder from the small openings of the heat exchanger. The majority of powder in the small chambers was removed, however, the amount of powder remaining in the heat exchanger was a function of geometry. Therefore, only certain geometries of heat exchangers could be fabricated. SRAM Dynamics evaluated a preliminary heat exchanger design. Although the results of the additive manufacturing of the heat exchanger were not optimum, a less complex geometry was demonstrated. A sleeve valve was used as a demonstration piece, as engine designs from S-RAM Dynamics require the engine to have a very high density. Preliminary designs of this geometry were successfully fabricated using the EBM technology.

  16. Intake and ingestive behavior of rams fed with increasing inclusions of babassu endocarp meal I in their diet (Orbignya spp.)

    Sá,Hemilly Cristina Menezes de; Borges,Iran; Macedo Junior,Gilberto de Lima; Neiva,José Neuman Miranda; Silva,Veridiana Basoni; Sousa,Jhone Tallison Lira de

    2014-01-01

    The objective of this work was to investigate the ingestive behavior of sheep fed with different inclusions of babassu endocarp meal I. The animals receive isofibrous, isoenergetic and isonitrogenous diets containing the by-product in increasing levels of inclusion (zero; 7,5%; 15%; 22,5%). Twenty rams were used in this study and distributed in four treatments with five repetitions each. The ingestive behavior was conducted over a period of 24 hours, with visual observations at 5 minutes inte...

  17. Multi-Scale Modelling of Deformation and Fracture in a Biomimetic Apatite-Protein Composite: Molecular-Scale Processes Lead to Resilience at the μm-Scale.

    Dirk Zahn

    Full Text Available Fracture mechanisms of an enamel-like hydroxyapatite-collagen composite model are elaborated by means of molecular and coarse-grained dynamics simulation. Using fully atomistic models, we uncover molecular-scale plastic deformation and fracture processes initiated at the organic-inorganic interface. Furthermore, coarse-grained models are developed to investigate fracture patterns at the μm-scale. At the meso-scale, micro-fractures are shown to reduce local stress and thus prevent material failure after loading beyond the elastic limit. On the basis of our multi-scale simulation approach, we provide a molecular scale rationalization of this phenomenon, which seems key to the resilience of hierarchical biominerals, including teeth and bone.

  18. Some Observational and Modeling Studies of the Atmospheric Boundary Layer at Mississippi Gulf Coast for Air Pollution Dispersion Assessment

    Anjaneyulu Yerramilli

    2008-12-01

    Full Text Available Coastal atmospheric conditions widely vary from those over inland due to the land-sea interface, temperature contrast and the consequent development of local circulations. In this study a field meteorological experiment was conducted to measure vertical structure of boundary layer during the period 25-29 June, 2007 at three locations Seabee base, Harrison and Wiggins sites in the Mississippi coast. A GPS Sonde along with slow ascent helium balloon and automated weather stations equipped with slow and fast response sensors were used in the experiment. GPS sonde were launched at three specific times (0700 LT, 1300 LT and 1800 LT during the experiment days. The observations indicate shallow boundary layer near the coast which gradually develops inland. The weather research and forecasting (WRF meso-scale atmospheric model and a Lagrangian particle dispersion model (HYSPLIT are used to simulate the lower atmospheric flow and dispersion in a range of 100 km from the coast for 28-30 June, 2007. The simulated meteorological parameters were compared with the experimental observations. The meso-scale model results show significant temporal and spatial variations in the meteorological fields as a result of development of sea breeze flow, its coupling with the large scale flow field and the ensuing alteration in the mixing depth across the coast. Simulated ground-level concentrations of SO2 from four elevated point sources located along the coast indicate diurnal variation and impact of the local sea-land breeze on the direction of the plume. Model concentration levels were highest during the stable morning condition and during the sea-breeze time in the afternoon. The highest concentrations were found up to 40 km inland during sea breeze time. The study illustrates the application of field meteorological observations for the validation of WRF which is coupled to HYSPLIT for dispersion assessment in the coastal region.

  19. Influence of sexual behavior of Dorper rams treated with glutamate and/or testosterone on reproductive performance of anovulatory ewes.

    Calderón-Leyva, Guadalupe; Meza-Herrera, Cesar A; Rodriguez-Martinez, Rafael; Angel-García, Oscar; Rivas-Muñoz, Raymundo; Delgado-Bermejo, Juan V; Véliz-Deras, Francisco G

    2018-01-15

    The aim of this study was to determine if exogenous administration of glutamate and (or) testosterone to male rams during the season of reproductive arrest is able to re-activate male sexual behavior and, later on, to promote through the male effect, both sexual and reproductive competence of anovulatory nulliparous ewes. Therefore, an experiment was performed under long-day photoperiods (spring; photo-reproductive arrest, 26°N). Dorper rams were randomly divided into four homogeneous experimental groups (n = 5 males each) regarding live weight (LW), body condition score (BCS), scrotal circumference (SC) and odor intensity (OI). Then, groups were treated with: i) GG (7 mg kg -1  LW of glutamate, every 4d × 30d, im.), ii) GGT (7 mg kg -1  LW of glutamate every 4d × 30d im + 25 mg of testosterone propionate, every 3d × 15d, im.), iii) GT (25 mg of testosterone propionate every 3d × 15d, im, and iv) GC (1 mL of saline, every 4d × 30d, im.). Thereafter, Dorper rams, (n = 4 per group) were selected and exposed to Dorper anovulatory-nulliparous ewes divided in four groups (n = 14 ewes each), and all the appetitive (ASB) and consummatory (CSB) sexual behaviors and indicators of sexual rest (ISR) were registered during the first 48 h of this male-to-females contact. Thereafter, males continued the male-to-female contact for another 8 d, in order to quantify the ewe's sexual and reproductive response through the male effect. During the sexual behavior tests, the GGT rams showed the highest ASB + CSB frequencies (P ewes exposed to treated rams, the glutamate + testosterone treated males induced not only an increased (P ewes. To conclude, whereas the GG and GGT treatments generated encouraging sexual and reproductive outcomes, our results are also thought-provoking from a comparative sexual behavior perspective while may embrace potential applications to other animal industries. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Marine biodiversity at the end of the world: Cape Horn and Diego Ramírez islands

    Ballesteros, Enric; Bell, Tom W.; Giddens, Jonatha; Henning, Brad; Hüne, Mathias; Muñoz, Alex; Salinas-de-León, Pelayo; Sala, Enric

    2018-01-01

    The vast and complex coast of the Magellan Region of extreme southern Chile possesses a diversity of habitats including fjords, deep channels, and extensive kelp forests, with a unique mix of temperate and sub-Antarctic species. The Cape Horn and Diego Ramírez archipelagos are the most southerly locations in the Americas, with the southernmost kelp forests, and some of the least explored places on earth. The giant kelp Macrocystis pyrifera plays a key role in structuring the ecological communities of the entire region, with the large brown seaweed Lessonia spp. forming dense understories. Kelp densities were highest around Cape Horn, followed by Diego Ramírez, and lowest within the fjord region of Francisco Coloane Marine Park (mean canopy densities of 2.51 kg m-2, 2.29 kg m-2, and 2.14 kg m-2, respectively). There were clear differences in marine communities among these sub-regions, with the lowest diversity in the fjords. We observed 18 species of nearshore fishes, with average species richness nearly 50% higher at Diego Ramírez compared with Cape Horn and Francisco Coloane. The number of individual fishes was nearly 10 times higher at Diego Ramírez and 4 times higher at Cape Horn compared with the fjords. Dropcam surveys of mesophotic depths (53–105 m) identified 30 taxa from 25 families, 15 classes, and 7 phyla. While much of these deeper habitats consisted of soft sediment and cobble, in rocky habitats, echinoderms, mollusks, bryozoans, and sponges were common. The southern hagfish (Myxine australis) was the most frequently encountered of the deep-sea fishes (50% of deployments), and while the Fueguian sprat (Sprattus fuegensis) was the most abundant fish species, its distribution was patchy. The Cape Horn and Diego Ramírez archipelagos represent some of the last intact sub-Antarctic ecosystems remaining and a recently declared large protected area will help ensure the health of this unique region. PMID:29364902