WorldWideScience

Sample records for meridian system part

  1. The meridian system and mechanism of acupuncture—A comparative review. Part 1: The meridian system

    Shyang Chang

    2012-12-01

    Full Text Available In traditional Chinese medicine (TCM, acupuncture has been used to heal various diseases and physiologic malfunctions in clinical practice for more than 2500 years. Due to its efficacy, acupuncture has been recommended by the World Health Organization in 1980 as an effective alternative therapy for 43 different disorders. Over the past few decades, various theories of the meridian system and mechanisms have been proposed to explain how acupuncture might work. Most of these mechanisms, however, cannot yet explain conclusively why acupuncture is efficacious in treating so many different diseases. A plausible mechanism has been unavailable until recently. This is the first of a three-part series that aims to provide a comparative review of the aforementioned topics. Part 1 reviews the current indications for acupuncture, basic concepts of TCM, and the essence of the meridian system. To establish a mathematically rigorous framework of TCM, the chaotic wave theory of fractal continuum is proposed. This theory is then applied to characterize the essence of the meridian system. Parts 2 and 3 will review the possible mechanisms of acupuncture analgesia and acupuncture therapies, respectively, based on biochemical, bioelectromagnetic, chaotic wave, and neurophysiologic approaches. It is sincerely hoped that this series of review articles can promote an understanding of the meridian system and acupuncture mechanisms to help patients in a logical and passionate way.

  2. The meridian system and mechanism of acupuncture: a comparative review. Part 3: Mechanisms of acupuncture therapies.

    Chang, Shyang

    2013-06-01

    The human body is a hierarchical organism containing many levels of mutually interacting oscillatory systems. From the viewpoint of traditional Chinese medicine, health is a state of harmony emergent from the interactions of these systems and disease is a state of discord. Hence, human diseases are considered as disturbed functions rather than changed structures. Indeed, the change from normal to abnormal structure may be beneficent rather than maleficent. For example, when one kidney becomes twice the normal size following the destruction of the other kidney, it is good and not bad for us because we might be dead otherwise. Therefore, in Part 3 of this three-part series, emphasis is mainly laid on the acupuncture mechanisms of treating disturbed physiological functions rather than disordered structures. At first, the basic tenets of conventional neuroscience and cardiology are reevaluated so that clear understanding of how nervous and cardiovascular systems work together can be obtained. Then, the general principles of diagnosis and treatment in traditional Chinese medicine from the integrative perspective of complex dynamic systems are proposed. Finally, mechanisms of acupuncture therapies for treating 14 different categories of disorders will be elucidated via the magneto-electric inductive effects of the meridian system. Copyright © 2013. Published by Elsevier B.V.

  3. A birdcage model for the Chinese meridian system: part III. Possible mechanism of magnetic therapy.

    Yung, Kaung-Ti

    2005-01-01

    Based on the electromagnetic model of the transmission line for the channel and the birdcage resonator for the meridian network, we interpret two effects, seemingly incomprehensible in terms of current Western physiology, the lasting effect and the remote effect. For the lasting effect, acupuncture enhances the amplitude of the Qi standing wave, and this increased amplitude is retained and thus is able to sustain a gradual remodeling of the extracellular matrix in interstitial connective tissues, resulting in a lasting therapeutic effect. For the remote effect (acupuncture effect far from the site of needle insertion), our model puts the mechanism of magnetic therapy on an equal footing with that of acupuncture. It may not be a coincidence that accounts of investigators in both acupuncture and magnetotherapy about the depth of the effective site--along cleavage planes between muscles, or between muscle and bone or tendon--are in accord with that of the Huang Di Nei Jing about the course of channels: "they are embedded and travel between interstitial muscles, deep and invisible." A possible magnetic field generated outside the birdcage may be manipulated to produce local areas of higher temperature or very strong fields.

  4. High accurate time system of the Low Latitude Meridian Circle.

    Yang, Jing; Wang, Feng; Li, Zhiming

    In order to obtain the high accurate time signal for the Low Latitude Meridian Circle (LLMC), a new GPS accurate time system is developed which include GPS, 1 MC frequency source and self-made clock system. The second signal of GPS is synchronously used in the clock system and information can be collected by a computer automatically. The difficulty of the cancellation of the time keeper can be overcomed by using this system.

  5. Systems Biology of Meridians, Acupoints, and Chinese Herbs in Disease

    Li-Ling Lin

    2012-01-01

    Full Text Available Meridians, acupoints, and Chinese herbs are important components of traditional Chinese medicine (TCM. They have been used for disease treatment and prevention and as alternative and complementary therapies. Systems biology integrates omics data, such as transcriptional, proteomic, and metabolomics data, in order to obtain a more global and complete picture of biological activity. To further understand the existence and functions of the three components above, we reviewed relevant research in the systems biology literature and found many recent studies that indicate the value of acupuncture and Chinese herbs. Acupuncture is useful in pain moderation and relieves various symptoms arising from acute spinal cord injury and acute ischemic stroke. Moreover, Chinese herbal extracts have been linked to wound repair, the alleviation of postmenopausal osteoporosis severity, and anti-tumor effects, among others. Different acupoints, variations in treatment duration, and herbal extracts can be used to alleviate various symptoms and conditions and to regulate biological pathways by altering gene and protein expression. Our paper demonstrates how systems biology has helped to establish a platform for investigating the efficacy of TCM in treating different diseases and improving treatment strategies.

  6. [Human body meridian spatial decision support system for clinical treatment and teaching of acupuncture and moxibustion].

    Wu, Dehua

    2016-01-01

    The spatial position and distribution of human body meridian are expressed limitedly in the decision support system (DSS) of acupuncture and moxibustion at present, which leads to the failure to give the effective quantitative analysis on the spatial range and the difficulty for the decision-maker to provide a realistic spatial decision environment. Focusing on the limit spatial expression in DSS of acupuncture and moxibustion, it was proposed that on the basis of the geographic information system, in association of DSS technology, the design idea was developed on the human body meridian spatial DSS. With the 4-layer service-oriented architecture adopted, the data center integrated development platform was taken as the system development environment. The hierarchical organization was done for the spatial data of human body meridian via the directory tree. The structured query language (SQL) server was used to achieve the unified management of spatial data and attribute data. The technologies of architecture, configuration and plug-in development model were integrated to achieve the data inquiry, buffer analysis and program evaluation of the human body meridian spatial DSS. The research results show that the human body meridian spatial DSS could reflect realistically the spatial characteristics of the spatial position and distribution of human body meridian and met the constantly changeable demand of users. It has the powerful spatial analysis function and assists with the scientific decision in clinical treatment and teaching of acupuncture and moxibustion. It is the new attempt to the informatization research of human body meridian.

  7. [From Bonghan system to primo vascular system:the thought on the substantial study on meridian points].

    Lin, Dong; Huang, Xiaozhen; Zhuang, Wanyu; Lin, Lili

    2017-01-12

    Through the systematic analysis on the primo vascular system (PVS) in recent years, we believe that in recent years, more and more studies have indicated that PVS is distributed in reticulate structure in every part of body, such as vessels, lymphangions, nerves, brain, spinal cords and internal organs, and it contains a large amount of immunocytes and has involved in the physiological or pathological process of the immunity and circulation in the body. There are the evidences to prove that in morphology and cytobiology. But, nowadays, there is no way to explain its effect characters. On the basis of the study on living matter characteristics, a breakthrough is possibly made through the systematic cooperation even though it is the difficulty to detect the life function effect. It is especially displayed in the substantial study on meridian points. Hence, the study on the law of meridian point effects on the basis of clinical practice has to be focused on in the substantial study on meridian points.

  8. Probing the mystery of Chinese medicine meridian channels with special emphasis on the connective tissue interstitial fluid system, mechanotransduction, cells durotaxis and mast cell degranulation

    Fung Peter

    2009-05-01

    Full Text Available Abstract This article hypothesizes that the Chinese medicine meridian system is a special channel network comprising of skin with abundant nerves and nociceptive receptors of various types, and deeper connective tissues inside the body with the flowing interstitial fluid system. These meridian channels provide efficient migratory tracks mainly due to durotaxis (also including chemotaxis for mast cells, fibroblasts and other cells to migrate and carry out a number of physiological functions. Acupuncture acting on meridian channel causes cytoskeletal remodeling through mechanotransduction, leading to regulation of gene expression and the subsequent production of related proteins. Also, stimulation on cell surface can trigger Ca2+ activities, resulting in a cascade of intra- and inter-cellular signaling. Moreover, nerve endings in the meridian channels interact with mast cells and induce the degranulation of these cells, leading to the release of many specific biomolecules needed for homeostasis, immune surveillance, wound healing and tissue repair. Acupoint along a meridian channel is a functional site to trigger the above functions with specificity and high efficiency.

  9. Defining meridians: a modern basis of understanding.

    Longhurst, John C

    2010-06-01

    Acupuncture, one of the primary methods of treatment in traditional Oriental medicine, is based on a system of meridians. Along the meridians lie acupuncture points or acupoints, which are stimulated by needling, pressure or heat to resolve a clinical problem. A number of methods have been used to identify meridians and to explain them anatomically. Thus, tendinomuscular structures, primo-vessels (Bonghan ducts), regions of increased temperature and low skin resistance have been suggested to represent meridians or as methods to identify them. However, none of these methods have met the criteria for a meridian, an entity that, when stimulated by acupuncture can result in clinical improvement. More recently, modern physiologists have put forward the "neural hypothesis" stating that the clinical influence of acupuncture is transmitted primarily through stimulation of sensory nerves that provide signals to the brain, which processes this information and then causes clinical changes associated with treatment. Although additional research is warranted to investigate the role of some of the structures identified, it seems clear that the peripheral and central nervous system can now be considered to be the most rational basis for defining meridians. The meridian maps and associated acupoints located along them are best viewed as road maps that can guide practitioners towards applying acupuncture to achieve optimal clinical results. Copyright 2010 Korean Pharmacopuncture Institute. Published by .. All rights reserved.

  10. A new definition of an acupuncture meridian.

    Kovich, Fletcher

    2018-05-11

    This article provides a new definition of an acupuncture meridian. It suggests that a meridian consists of a distal tract of tissue that is affected by organ function. In the 1960's, Kim discovered the primo vascular system, and regarded the superficial primo vessels as equating to the meridians. Instead, this article suggests that the superficial primo vessels merely underlie the meridians, in that they enable their creation, which is why some meridians are said to occur along the paths of superficial primo vessels. But the meridians themselves do not have a dedicated anatomical structure; instead they are merely tracts of tissue whose normal function is impeded when the related abdominal organ is stressed. It is hypothesised that the organ information is communicated in electrical waves that may travel through the connective tissue sheaths of the superficial primo vessels. Hence the primo vessels serve as an inadvertent transport for this information, but the organ information is independent of the physiological purpose of the primo vascular system, as are the resultant meridians. Copyright © 2018. Published by Elsevier B.V.

  11. [Identification of meridian-acupoint diagrams and meridian diagrams].

    Shen, Wei-hong

    2008-08-01

    In acu-moxibustion literature, there are two kinds of diagrams, meridian-acupoint diagrams and meridian diagrams. Because they are very similar in outline, and people now have seldom seen the typical ancient meridian diagrams, meridian-acupoint diagrams have been being incorrectly considered to be the meridian diagrams for a long time. It results in confusion in acu-moxibustion academia. The present paper stresses its importance in academic research and introduces some methods for identifying them correctly. The key points for identification of meridian-acupoint diagrams and meridian diagrams are: the legend of diagrams and the drawing style of the ancient charts. In addition, the author makes a detailed explanation about some acu-moxibustion charts which are easily confused. In order to distinguish meridian-acupoint diagrams and meridian diagrams correctly, he or she shoulnd understand the diagrams' intrinsic information as much as possible and make a comprehensive analysis about them.

  12. Investigation of the Lower Resistance Meridian: Speculation on the Pathophysiological Functions of Acupuncture Meridians

    Weisheng Yang

    2014-01-01

    Full Text Available It was pointed out in the two earlier papers of the present author that the meridians are in fact zones in the loose connective tissue containing richer interstitial fluid and thus are lower-resistance passages for diffusion of meridian-signal carriers or mediators. Moreover, a hypothesis, which incorporates the wide variety of functions of the loose connective tissue, the circulatory system, and the nervous system into the meridian function, has been proposed and in the hypothesis the mast cell plays some key roles. In the present paper, considering also the latest knowledge on cell migration along with some existing experimental results, it is further pointed out that meridians ought to be lower-resistance passages for chemotactic migration of cells and mast cells can indeed migrate longitudinally along meridians. Finally, the present paper points out that if we add the last two points to the hypothesis and keep in mind that mast cells have been known very recently to be versatile regulators of inflammation, tissue remodeling, host defense, and homeostasis, the rich pathophysiological functions of the meridian pointed out by the traditional Chinese medicine can be understood quite naturally.

  13. [Analysis on property of meridian supramolecules by biological evolution path].

    Deng, Kaiwen; Tao, Yeqin; Tang, Wenhan; He, Fuyuan; Liu, Wenlong; Shi, Jilian; Yang, Yantao; Zhou, Yiqun; Chang, Xiaorong

    2017-03-12

    With human placed in the whole nature, by following the biologic evolution path, the property of channel structure for "imprinting template" in meridian and zang-fu was explored with supramolecular chemistry. In the history of biologic evolution, each molecule in "molecule society" gradually developed into various highly-ordered supramolecular bodies based on self-identification, self-assembly, self-organization, self-replicating of"imprinting template", and thereby the original biochemical system was established, and finally evolved into human. In the forming process of supramolecular bodies, the channel structure of"imprinting template" in guest supramolecular bodies would be kept by host supramolecular bodies, and communicate with the outside to exchange materials, energy, information, otherwise life phenomenon could not continue, for which it was the chemical nature of biolo-gical supramolecular bodies for body to develop meridian. Therefore, the human was a gigantic and complicated supramolecules body in biological nature, and possessed the supramolecules "imprinting template" at each stage of evolution, for which the meridians were formed. When meridians converged, acupoints appeared; when acupointsconverged, zang-fu appeared. With the promotion of the blood from heart, according to"imprinting template", the guest supramolecular bodies and host meridian produced qi -analysis, which was the qi -phenomenon of guest in meridian. It presented as zang-fu image of physiology and pathology as well as action regularities of medication and acupuncture tolerance, by which current various meridian viewpoints could be explained and propose the hypothesis of meridian supramolecular bodies. The meridian and its phenomenon was decide by its "imprinting template" of supramolecular bodies and self-reaction regularities, which abided through the living nature. This was the substance for meridian biology.

  14. Study on stability of DMS meridian detector.

    Yang, Ning; Huang, Li; Yuan, Jiamin; Zhang, Zhifang; Yang, Zhimin

    2016-05-01

    The stability of meridian detector was the basis to study meridian through conductance method. Ancient documents mentioned that the human body's blood could change with the time and meridians. When qi and blood came, the qi and blood would be full of that place; when qi and blood gone, the local skin shining could fade and recess. It liked the tidal fluctuation, then caused the corresponding acupuncture points conductance value changes. Modern studies had reported that meridian detector instrument the skin area of twelve meridians acupuncture points could change along with time within 24 hours. In this circumstance, whether the conductance values changes in human acupuncture points had statistical significance was vital important. DMS meridian detector instruction was adopt to measure the twelve meridian jingyuan acupuncture point in order to analyze the acupuncture point conductance value changes within one day.

  15. Why the Greenwich Meridian Moved

    2015-08-01

    ellipsoid from a point on its minor axis above the north pole. O = spheroid axis passing through the geocenter, Eq = ground level equipotential surface , Sph...which the geodetic coor- dinates, ϕ and λ, refer. The DoV components (ξ , η) also represent the slopes of the geoid surface with respect to the surface of...illustrated, the shift eastward at Greenwich represents only a lateral transfer of the trace of the geodetic longitude λ = 0 meridian across the surface

  16. Information Models of Acupuncture Analgesia and Meridian Channels

    Chang Hua Zou

    2010-12-01

    Full Text Available Acupuncture and meridian channels have been major components of Chinese and Eastern Asian medicine—especially for analgesia—for over 2000 years. In recent decades, electroacupuncture (EA analgesia has been applied clinically and experimentally. However, there were controversial results between different treatment frequencies, or between the active and the placebo treatments; and the mechanisms of the treatments and the related meridian channels are still unknown. In this study, we propose a new term of infophysics therapy and develop information models of acupuncture (or EA analgesia and meridian channels, to understand the mechanisms and to explain the controversial results, based on Western theories of information, trigonometry and Fourier series, and physics, as well as published biomedical data. We are trying to build a bridge between Chinese medicine and Western medicine by investigating the Eastern acupuncture analgesia and meridian channels with Western sciences; we model the meridians as a physiological system that is mostly constructed with interstices in or between other physiological systems; we consider frequencies, amplitudes and wave numbers of electric field intensity (EFI as information data. Our modeling results demonstrate that information regulated with acupuncture (or EA is different from pain information, we provide answers to explain the controversial published results, and suggest that mechanisms of acupuncture (or EA analgesia could be mostly involved in information regulation of frequencies and amplitudes of EFI as well as neuronal transmitters such as endorphins.

  17. On dermatomes, meridians and points: results of a quasiexperimental study.

    Sánchez-Araujo, Max; Luckert-Barela, Ana J; Sánchez, Nathalia; Torres, Juan; Conde, Jesus Eloy

    2014-02-01

    Traditional Chinese medicine (TCM) meridians and points run vertically, reflecting their function in the Zhang-Fu system (meridian pattern). However, the trunk's spinal nerves show a traverse orientation, or a 'horizontal pattern'. The aim of the present work was to evaluate, via a cognitive quasiexperiment, whether the clinical indications of the points on the trunk are associated with their meridian function or with their innervation and visceral-somatic connection. The points in each dermatome of the trunk were considered crosswise, regardless of their meridians. The clinical indications for each point were differentiated into two mutually exclusive categories: (a) vertical distribution effect (VDE) or 'meridian pattern', when indications were quite different regarding the indications for the other points on the dermatome; and (b) transverse distribution effects (TDE) or 'horizontal pattern', represented by mainly local or segmental indications except for Shu-Mu points. After observing that the proportions between both categories often exceeded 60% in pilot samples, 60% was adopted as the reference value. A total of 22 dermatomes accommodated 148 points with 809 indications, of which 189 indications (23.4%) exhibited VDE features, whereas 620 (76.6%) exhibited TDE features. A TDE/VDE ratio of 3 : 1 implies that the clinical indications for the points of any dermatome on the torso are similar, regardless of their meridians, and suggests that most of the indications for trunk points involve a 'horizontal pattern' due to their neurobiological nature. These findings may help in understanding acupuncture's neurobiology and clarify some confusing results of clinical research, for example, excluding sham acupuncture as an inert intervention for future clinical trials.

  18. An information entropy model on clinical assessment of patients based on the holographic field of meridian

    Wu, Jingjing; Wu, Xinming; Li, Pengfei; Li, Nan; Mao, Xiaomei; Chai, Lihe

    2017-04-01

    Meridian system is not only the basis of traditional Chinese medicine (TCM) method (e.g. acupuncture, massage), but also the core of TCM's basic theory. This paper has introduced a new informational perspective to understand the reality and the holographic field of meridian. Based on maximum information entropy principle (MIEP), a dynamic equation for the holographic field has been deduced, which reflects the evolutionary characteristics of meridian. By using self-organizing artificial neural network as algorithm, the evolutionary dynamic equation of the holographic field can be resolved to assess properties of meridians and clinically diagnose the health characteristics of patients. Finally, through some cases from clinical patients (e.g. a 30-year-old male patient, an apoplectic patient, an epilepsy patient), we use this model to assess the evolutionary properties of meridians. It is proved that this model not only has significant implications in revealing the essence of meridian in TCM, but also may play a guiding role in clinical assessment of patients based on the holographic field of meridians.

  19. Alice Walker’s Womanism in Meridian

    GAN Lin

    2015-01-01

    Meridian is one of Alice Walker’s early work. It tells a story that happened in the American south during the 1960s and early 70s’. It describes the life of the main character, Meridian Hill, a black woman from a southern town, who got out of the oppression of white society, and ends up in participate in Civil Rights Movement. The paper firstly illustrates the soul of womanism—anti-sexism, anti-racism, sisiterhood as well as the maternity love, then analyzes how these theories permeated into the novel—Meridian. The paper paid attention to the function of this novel on the improvement of Alice Walker ’s womanism. In proving that womanism not only permeates into Meridian, but also improved womanism from many perspectives, it comes to the conclusion that Meridian is a novel to improve Alice Walker’s womanism, it serves as the good novel to highlight the African Culture, and made a great contribution for the encouragement of black women to seek for freedom in the society.

  20. Effective acupuncture practice through diagnosis based on distribution of meridian pathways & related syndromes.

    Chen, Yemeng; Zheng, Xin; Li, Hui; Zhang, Qunce; Wang, Tianfang

    2011-01-01

    This article discusses the importance of acupuncture practice utilizing diagnosis and distribution of various meridians and connecting channels based on meridian theory. The meridian system is considered as basic anatomy for acupuncture, so the corresponding pathways and related syndromes of different channels should play a key role in differentiation, known as meridian-related pattern differentiation. Since this doctrine originated in ancient times and was not so well developed in later generations, many acupuncturists are not able to utilize it efficiently. The authors survey how this doctrine was weakened during the past century, especially in acupuncture education for foreigners, and how this important method is currently being reinvigorated. This article also lays out the ways this doctrine can be applied clinically and introduces examples of a variety of indications including some difficult cases, such as whiplash injury, intervertebral disc herniation, oculomotor nerve paralysis, and eczema, etc.

  1. Endocrine system: part 1.

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    2014-05-27

    This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

  2. Loose parts monitoring system

    Wakasa, Kohji; Nishida, Eiichi; Ishii, Kazuo; Yamanaka, Hiroto.

    1987-01-01

    In the loose parts monitoring system (LPMS), installed for integrity monitoring of the nuclear power plants; when there occur foreign metallic objects in the reactor primary system, including a steam generator and the piping, the sounds caused by them moving with the cooling water and thereby getting in contact with various structures are detected. Its purpose is, therefore, to detect any abnormality in the reactor plant system through such abnormal sounds due to loose or fallen supports etc., and so provide this information to the reactor operators. In principle, accelerometers are distributed in such as reactor vessel, steam generator, coolant pumps, etc., so that various sounds are collected and converted into electrical signals, followed by analysis of the data. Described are the LPMS configuration/functions, the course taken in LPMS development, future problems, etc. (Mori, K.)

  3. [Analysis of clinical characteristics of traditional Chinese and Western medicine in Professor Jiang Liangduo's theory of "sanjiao meridian stasis"].

    Wang, Hai-Yan; Jiang, Liang-Duo; Ma, Qing; Xu, Dong; Tang, Shi-Huan; Luo, Zeng-Gang

    2017-12-01

    In the clinical practice, Professor Jiang Liangduo, a national senior Chinese medicine doctor, has created the theory of "sanjiao meridian stasis" from the theory of meridian dialectics and from the overall state. In this paper, the traditional Chinese medicine and Western medicine clinical characteristics of sanjiao meridian stasis theory which is often used by Professor Jiang Liangduo in the treatment of out-patient syndrome differentiation, were first studied and summarized to investigate its inherent regularity. First, the source of data and research methods were introduced, and then the Traditional Chinese Medicine Inheritance Support System was used with the method of data mining to retrospectively analyze the disease characteristics of Chinese and Western medicine in 279 patients with sanjiao meridian stasis diagnosed by Professor Jiang in 2014. Then the following main conclusions were made after research: sanjiao meridian stasis was more common in women as well as young and middle-aged population. Often manifested by prolonged treatment course, red tongue with yellowishfur, with good correlation between modern Western medicine diagnosis and TCM differentiation syndrome. The symptoms of sanjiao meridian stasis syndrome are mostly of heat syndromes, and middle-aged patients are the most common patients with stasis and stasis of sanjiao. Related information of Western medicine diagnosis can help to diagnose the "sanjiao meridian stasis". Copyright© by the Chinese Pharmaceutical Association.

  4. [Science of Meridians, Collaterals and Acupoints--Exploration on teaching method of meridian syndromes].

    Wang, Yinping; Zhang, Zongquan; Wang, Wenlin; Yuan, Limin

    2015-04-01

    Meridian syndromes are the required basic knowledge for mastering Science of Meridians, Collaterals and Acupoints but have not brought the adequate attention on the teaching program. The writers discovered' that the content of this section occupied a decisive role for developing the students' clinical thinking ability and, stimulating their interests to learn classical TCM theories. It's necessary to enhance the importance on meridian syndromes during teaching program. The teaching program was discussed in three aspects, named workshop pattern, competitive pattern and multimedia pattern. This teaching method may improve students' interests in the study on classical TCM theories, deepen the understanding on knowledge and motivate students' learning autonomy so that the teaching quality can be improved.

  5. A primary study on meridian-stretching of injected FDG using PET MPItool

    He Yijie; Tian Jiahe; Chen Yingmao; Yin Dayi; Zhang Jinming; Zhang Shuwen; Shao Mingzhe; Yao Shulin; Ding Weimin; Liu Zilai

    2002-01-01

    Objective: To show the images of tracer-stretching along the acupuncture meridian by use of PET with multipurpose imaging tool (MPItool's) fusion function. Methods: On 5 healthy volunteers, the authors measured the classical acupuncture points accurately with the biophysical measuring method. 18 F-fluorodeoxyglucose (FDG) was injected into the selected points, the others points along the same meridian were labelled with 18 F-FDG applied on the correspondent skin area of 2 . With the same body position, the transmission image and emission image was acquired respectively and fused with MPItool and its 3D display system. Results: The authors clearly showed not only the meridian-stretching images of the tracer, but also figured out the depth of the study points. The depth at SHANGJUXU point was about 3.8 cm and at ZUSANLI point was about 5,0 cm. The depths basically fit the classically documented ones of the correspondent acupuncture points. Conclusions: Using PET MPItool the authors preliminarily demonstrated that the tracer injected at the acupuncture point stretches along the correspondent meridian, and the depths of the meridian and the points (SHANGJUXU, ZUSANLI) detected are almost accordant with the classically documented ones

  6. The existence of propagated sensation along the meridian proved by neuroelectrophysiology

    Xu, Jinsen; Zheng, Shuxia; Pan, Xiaohua; Zhu, Xiaoxiang; Hu, Xianglong

    2013-01-01

    Propagated sensation along the meridian can occur when acupoints are stimulated by acupuncture or electrical impulses. In this study, participants with notable propagated sensation along the dian were given electro-acupuncture at the Jianyu (LI15) acupoint of the large intestine meridian. When participants stated that the sensation reached the back of their hand, regular nervous system action discharge was examined using a physiological recording electrode placed on the superficial branch of the radial nerve. The topographical maps of brain-evoked potential in the primary cortical somatosensory area were also detected. When Guangming (GB37) acupoint in the lower limb and Hegu (LI4) acupoint in the upper limb were stimulated, subjects without propagated sensation along the meridian exhibited a high potential reaction in the corresponding area of the brain cortical so-matosensory area. For subjects with a notable propagated sensation along the meridian, the tion area was larger and extended into the face representative area. These electrophysiological measures directly prove the existence of propagated sensation along the meridian, and the pheral stimulated site is consistent with the corresponding primary cortical somatosensory area, which presents a high potential reaction. PMID:25206574

  7. [Professor ZHAO Jiping's meridian diagnosis and treatment for primary dysmenorrhea].

    Tan, Cheng; Zhang, Chang; Zhang, Jiajia; Wang, Jun

    2016-03-01

    For the treatment of primary dysmenorrhea, professor ZHAO Jiping focuses on meridian diagnosis and inspection, and uses pressing methods to locate the response points along the meridian, including acupoints and aishi points. During the stage of attack, it is essential to press along the spleen meridian, mainly Sanyinjiao (SP 6), Diji (SP 8) and Yinlingquan (SP 9); during the stage of remission, it is essential to press along the bladder meridian and stomach meridian, mainly Ganshu (BL 18), Pishu (BL 20), Weishu (BL 21), Shenshu (BL 23) and Zusanli (ST 36). The differences between deficiency syndrome and excess syndrome lead to the different feelings of doctors and patients. Combined with the results of meridian diagnosis and inspection, the aim of treatment can be achieved by different acupuncture methods. Professor ZHAO pays attention to the treatment of accompanied symptoms and timing of treatment, since the relief of accompanied syndromes and selection of timing are keys to relieving patient's pain.

  8. Electrical impedance along connective tissue planes associated with acupuncture meridians

    Hammerschlag Richard

    2005-05-01

    Full Text Available Abstract Background Acupuncture points and meridians are commonly believed to possess unique electrical properties. The experimental support for this claim is limited given the technical and methodological shortcomings of prior studies. Recent studies indicate a correspondence between acupuncture meridians and connective tissue planes. We hypothesized that segments of acupuncture meridians that are associated with loose connective tissue planes (between muscles or between muscle and bone visible by ultrasound have greater electrical conductance (less electrical impedance than non-meridian, parallel control segments. Methods We used a four-electrode method to measure the electrical impedance along segments of the Pericardium and Spleen meridians and corresponding parallel control segments in 23 human subjects. Meridian segments were determined by palpation and proportional measurements. Connective tissue planes underlying those segments were imaged with an ultrasound scanner. Along each meridian segment, four gold-plated needles were inserted along a straight line and used as electrodes. A parallel series of four control needles were placed 0.8 cm medial to the meridian needles. For each set of four needles, a 3.3 kHz alternating (AC constant amplitude current was introduced at three different amplitudes (20, 40, and 80 μAmps to the outer two needles, while the voltage was measured between the inner two needles. Tissue impedance between the two inner needles was calculated based on Ohm's law (ratio of voltage to current intensity. Results At the Pericardium location, mean tissue impedance was significantly lower at meridian segments (70.4 ± 5.7 Ω compared with control segments (75.0 ± 5.9 Ω (p = 0.0003. At the Spleen location, mean impedance for meridian (67.8 ± 6.8 Ω and control segments (68.5 ± 7.5 Ω were not significantly different (p = 0.70. Conclusion Tissue impedance was on average lower along the Pericardium meridian, but not

  9. The Meridians of Reference of Indian Astronomical Canons

    Mercier, R.

    The canons of Sanskrit astronomy depend on mean motions which are normally postulated to refer to the central meridian of Ujjain. The present work is a statistical analysis of these mean motions designed to discover the optimum position of the meridian, by comparison with modern mean motions. This follows earlier work done by Billard in determining the optimum year.

  10. Endocrine system: part 2.

    Hendry, Charles; Farley, Alistair; McLafferty, Ella; Johnstone, Carolyn

    2014-06-03

    This article, the last in the life sciences series, is the second of two articles on the endocrine system. It discusses human growth hormone, the pancreas and adrenal glands. The relationships between hormones and their unique functions are also explored. It is important that nurses understand how the endocrine system works and its role in maintaining health to provide effective care to patients. Several disorders caused by human growth hormone or that affect the pancreas and adrenal glands are examined.

  11. Principle Study of Head Meridian Acupoint Massage to Stress Release via Grey Data Model Analysis.

    Lee, Ya-Ting

    2016-01-01

    This paper presents the scientific study of the effectiveness and action principle of head meridian acupoint massage by applying the grey data model analysis approach. First, the head massage procedure for massaging the important head meridian acupuncture points including Taiyang, Fengfu, Tianzhu, Fengqi, and Jianjing is formulated in a standard manner. Second, the status of the autonomic nervous system of each subject is evaluated by using the heart rate variability analyzer before and after the head massage following four weeks. Afterward, the physiological factors of autonomic nerves are quantitatively analyzed by using the grey data modeling theory. The grey data analysis can point out that the status of autonomic nervous system is greatly improved after the massage. The order change of the grey relationship weighting of physiological factors shows the action principle of the sympathetic and parasympathetic nerves when performing head massage. In other words, the grey data model is able to distinguish the detailed interaction of the autonomic nervous system and the head meridian acupoint massage. Thus, the stress relaxing effect of massaging head meridian acupoints is proved, which is lacked in literature. The results can be a reference principle for massage health care in practice.

  12. Comparison of Acupuncture Effect on Blood Perfusion between Needling Nonacupoint on Meridian and Needling Nonacupoint off Meridian

    Wei-Bo Zhang

    2013-01-01

    Full Text Available To verify the ancient theory of rather missing the acupoint than missing the meridian, acupuncture at nonacupoint on meridian and acupuncture at nonacupoint off meridian were performed, respectively. The blood perfusion (BP on the calf around bladder meridian area was measured with a laser Doppler perfusion imager before, during, and after acupuncture. The whole scanning field was divided into seven subareas, and mean BP on each area was calculated. The ratio of mean BP between a subarea and a reference subarea was gotten, and then the change rate was calculated as ratio change rate (RCR. The results showed that RCR on bladder meridian area and around Chengshan (BL57 during or after acupuncture at nonacupoint on meridian was significantly higher than that at nonacupoint off meridian, which supports the ancient theory. Such differences may be attributable to some factors that can facilitate the signals transmission and produce a better acupuncture effect, such as richer nerve terminals, blood vessels, and mast cells which can produce stronger signals on the acupoints and the low hydraulic resistance channel along meridians which plays a role of signal transmitting channel to get a better effect of acupuncture.

  13. [Construction of the study platform for Meridians and Acupoints and the application in the flipped classroom].

    Hu, Rong

    2016-11-12

    To construct the study platform for meridians and acupoints by analyzing the status and current problems of teaching Meridians and Acupoints and in accordance with the principles as "knowledge fragmentation, game breakthrough and overall assessment" and observe the application effect in the flipped classroom. Totally two hundred and five 2014 grade bachelor candidates from four classes of the department of acupuncture-moxibustion and tuina were selected from Hunan Junior College of TCM. They were randomized into an observation group (102 cases) and a control group (103 cases). in the observation group, the flipped classroom was performed by adopting the study platform of meridians and acupoints. Additionally, the team cooperation learning and overall assessment were conducted. In the control group, the traditional teaching system was adopted, in which, the mode of "teacher's demonstration-to-discussion in group-to-teachers' assessment" and the operation check at the end of the semester were applied. The learning effect and the self-learning ability were evaluated at the end of semester in the two groups. The satisfaction survey was conducted in the observation group. In the observation group, the drawing of meridian running course and locating the acupoints, as well as the self-learning ability were better than those in the control group, indicating the significant differences (all P flipped classroom and the satisfaction of participation were slightly low. The study platform of learning Meridians and Acupoints was applied in the flipped classroom and has effectively improved the practical manipulation results and self-learning ability. However, the interestingness and interactivity of the platform are expected to be improved. The effective teaching design should be adopted in the flipped classroom to improve the students' desire of participation.

  14. What's the Original Concept of Meridian and Acupuncture Point in Oriental Medicine? - A Perspective of Medical History

    YIN Chang- Shik

    2005-12-01

    Full Text Available Meridian and acupuncture point(MAP is a core theory of acupuncture and essential building blocks of oriental medicine. There still continue theoretic or experimental arguments and controversies on the origination or original concept of MAP, without any definite approval or disapproval of a hypothesis. The theory of MAP is an historic product and has never been outside of historic influences. This study discusses the original concept of meridian and acupuncture point theory and its historical evolution, based on the review of classic literatures on meridian including the mawangdui medical texts of Han dynasty. The concept of MAP served as a empirical reference system in clinical settings irrespective of the anatomical entity of MAP.

  15. Possible role of epidermal keratinocytes in the construction of acupuncture meridians.

    Denda, Mitsuhiro; Tsutsumi, Moe

    2014-04-01

    Acupuncture meridians consist of a network of acupuncture points on the skin, stimulation of which is well established to have a variety of physiological effects. We have previously demonstrated that epidermal keratinocytes contain multiple sensory systems for temperature, mechanical stimuli, electric potentials and other stimuli. These sensory systems generate changes in the calcium-ion concentration in the epidermis, so epidermal keratinocytes can generate spatially-localized electro-physiological patterns in the skin. We have previously demonstrated signaling between epidermal keratinocytes and peripheral nerve systems. Therefore, stimuli sensed by epidermal keratinocytes might be transferred to the unmyelinated nerve fibers that are known to exist in the epidermis and, thence, to the spinal cord and brain. We propose that epidermal keratinocytes form an information-gathering network in the skin and that this network plays a key role in whole-body homeostasis in response to the changing environment. We also hypothesize that this network corresponds to the acupuncture meridians. As supporting examples, we present some striking calcium propagation patterns observed in cultured human keratinocytes after adenosine-triphosphate (ATP) stimulation. These results support the ideas that keratinocytes can generate spatially-restricted signaling patterns after environmental stimulation and that the cultures might be in-vitro models of meridians as an information-gathering network in skin. Copyright © 2014. Published by Elsevier B.V.

  16. Statistical analysis of 4 types of neck whiplash injuries based on classical meridian theory.

    Chen, Yemeng; Zhao, Yan; Xue, Xiaolin; Li, Hui; Wu, Xiuyan; Zhang, Qunce; Zheng, Xin; Wang, Tianfang

    2015-01-01

    As one component of the Chinese medicine meridian system, the meridian sinew (Jingjin, (see text), tendino-musculo) is specially described as being for acupuncture treatment of the musculoskeletal system because of its dynamic attributes and tender point correlations. In recent decades, the therapeutic importance of the sinew meridian has become revalued in clinical application. Based on this theory, the authors have established therapeutic strategies of acupuncture treatment in Whiplash-Associated Disorders (WAD) by categorizing four types of neck symptom presentations. The advantage of this new system is to make it much easier for the clinician to find effective acupuncture points. This study attempts to prove the significance of the proposed therapeutic strategies by analyzing data collected from a clinical survey of various WAD using non-supervised statistical methods, such as correlation analysis, factor analysis, and cluster analysis. The clinical survey data have successfully verified discrete characteristics of four neck syndromes, based upon the range of motion (ROM) and tender point location findings. A summary of the relationships among the symptoms of the four neck syndromes has shown the correlation coefficient as having a statistical significance (P < 0.01 or P < 0.05), especially with regard to ROM. Furthermore, factor and cluster analyses resulted in a total of 11 categories of general symptoms, which implies syndrome factors are more related to the Liver, as originally described in classical theory. The hypothesis of meridian sinew syndromes in WAD is clearly supported by the statistical analysis of the clinical trials. This new discovery should be beneficial in improving therapeutic outcomes.

  17. [Characteristics of infrared radiation of meridians and acupoints].

    Zheng, Juan-Juan; Shen, Xue-Yong; Zhao, Yi

    2010-10-01

    Infrared radiation temperature and characteristics of infrared spectrum of meridians and acupoints are summarized in this article. The infrared radiant track along the running course of meridians might be a ubiquitous phenomenon of the vital activity. The high temperature bands below the meridian lines at the cuticular layer are often taken as the manifestation of the tract. It could be induced by various stimulations on acupoints with warm-needling as the best causative method. High temperature and low resistance are considered as 2 features of the acupoint zone. The adenosine-triphosphate energy metabolism of the acupoint zone is higher than the non-point zone, which indicates that essential physiological and pathological information are carried by infrared radiation temperature of acupoint and infrared spectrum of acupoint. However, it is realized that study on characteristics of infrared radiation only is far from enough to reveal the essence of meridians and acupoints. And much still remains to be done in strengthening basic studies of characteristics of infrared radiation, structure pattern of meridians and acupoints as well as volt-ampere characteristics.

  18. Acupuncture Treatment of Chronic Low Back Pain by Using the Jingjin (Meridian Sinews) Model.

    Legge, David

    2015-10-01

    This case report details the unexpected and sustained relief from chronic low back pain in a patient after a single acupuncture treatment. The treatment administered on that occasion was based on the jingjin (i.e., "meridian sinew") model of traditional acupuncture. Treatments based on the jingjin model involve needling the ah shi (i.e., locally tender) points in myofascial tissue along the jingjin pathway. Tight chains can be needled to treat symptoms that are either close to or at some distance from the site of the needling treatment. In this patient, the points were in the gastrocnemius muscle and the hamstring muscles, which are part of the Bladder jingjin pathway. The patient, a 69-year-old woman, had had back pain for more than 40 years. The relief from the pain occurred within a day after the treatment and, at the time of this report, the relief has persisted for 5 months. This report examines two possible mechanisms for such a result: (1) a local increase in the extensibility of the hamstrings could be responsible or (2) the complex interactions within the central nervous system that are involved in acupuncture treatment could be more important factors. Copyright © 2015. Published by Elsevier B.V.

  19. Review of Evidence Suggesting That the Fascia Network Could Be the Anatomical Basis for Acupoints and Meridians in the Human Body

    Yu Bai

    2011-01-01

    Full Text Available The anatomical basis for the concept of meridians in traditional Chinese medicine (TCM has not been resolved. This paper reviews the evidence supporting a relationship between acupuncture points/meridians and fascia. The reviewed evidence supports the view that the human body's fascia network may be the physical substrate represented by the meridians of TCM. Specifically, this hypothesis is supported by anatomical observations of body scan data demonstrating that the fascia network resembles the theoretical meridian system in salient ways, as well as physiological, histological, and clinical observations. This view represents a theoretical basis and means for applying modern biomedical research to examining TCM principles and therapies, and it favors a holistic approach to diagnosis and treatment.

  20. [Study on characteristics of pharmacological effects of traditional Chinese medicines distributing along lung meridian based on medicinal property combination].

    Gu, Hao; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

    2014-07-01

    Medicinal properties are the basic attribute of traditional Chinese medicines (TCM), while the medicinal property theory is the core theoretical foundation of TCM formula combination. In this particle, authors studied the characteristics of pharmacological effects of property combination of traditional Chinese medicines distributing along meridians, with the aim to introduce the medicinal property combination regularity into the design and optimization process of compound TCMs, and bring the medicinal property theory into full play in guiding the formula combination. In this paper, TCMs distributing along "the lung meridian" was taken for example. The medicinal property combinations of TCMs distributing along "the lung meridian" recorded in Pharmacopeia (2010) was collected and processed. Besides, Chinese journal full-text database (CNKI) was used to collect all of pharmacological study literatures concerning the above TCMs that have been published since 1980. The pharmacological information was also supplemented by reference to Science of Chinese Materia Medica and Clinical Science of Chinese Materia Medica. TCMs distributing along the lung meridian with different properties and tastes showed significant differences in pharmacological effects. For example, mild-sweet-lung medicines could lower blood sugar levels, decrease anoxia and enhance immunity; Mild-bitter-lung medicines showed anti-bacterial, anti-hypertension, anti-oxidation effects; Hot-sweet-lung medicines showed antibechic and anti-bacterial effects. And Hot-bitter-lung medicines showed phlegm eliminating and anti-inflammatory effects. Meanwhile, TCMs distributing along the lung meridian had similar pharmacological characteristics, such as anti-bacterial and anti-inflammatory effects, which is consistent with lung's feature in susceptibility to exogenous pathogenic factors. In this study, authors discovered pharmacological characteristics of different TCMs distributing along the lung meridian, which

  1. Global communication using a constellation of low earth meridian orbits

    Oli, P. V. S.; Nagarajan, N.; Rayan, H. R.

    1993-07-01

    The concept of 'meridian orbits' is briefly reviewed. It is shown that, if a satellite in the meridian orbit makes an odd number of revolutions per day, then the satellite passes over the same set of meridians twice a day. Satellites in such orbits pass over the same portion of the sky twice a day and every day. This enables a user to adopt a programmed mode of tracking, thereby avoiding a computational facility for orbit prediction, look angle generation, and auto tracking. A constellation of 38 or more satellites placed in a 1200 km altitude circular orbit is favorable for global communications due to various factors. It is shown that appropriate phasing in right ascension of the ascending node and mean anomaly results in a constellation, wherein each satellite appears over the user's horizon one satellite after another. Visibility and coverage plots are provided to verify the continuous coverage.

  2. Variation in meroplankton along 78 degrees E Meridian

    Balachandran, T.; Peter, K.J.

    Variations along the meridian 78 degrees E between 8 degrees N and 25 degrees S, based on 43 zooplankton samples were studied. Fish larvae exhibited fluctuations in abundance (26 to 57 specimens/IOSN haul) in the three zones studied (8 degrees N-5...

  3. 78 FR 30331 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

    2013-05-22

    ... Registration; Meridian Medical Technologies By Notice dated March 7, 2012, and published in the Federal Register on March 13, 2013, 78 FR 15974, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis... that the registration of Meridian Medical Technologies to import the basic class of controlled...

  4. 77 FR 31388 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

    2012-05-25

    ... Registration; Meridian Medical Technologies By Notice dated March 23, 2012, and published in the Federal Register on April 2, 2012, 77 FR 19716, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...) and 952(a), and determined that the registration of Meridian Medical Technologies to import the basic...

  5. [Theoretical and clinical application of insomnia caused by "stomach disorder could lead to excess of yang-qiao meridian"].

    Ren, Jian-Ning

    2013-02-01

    To explore the mechanism of insomnia caused by "stomach disorder could lead to excess of yang-qiao meridian" and clinical application of treating insomnia with acupoints in qiao meridian as the main points. From meridian theory, intersection between stomach meridian of Foot-Yangming and yang-qiao meridian is through Chengqi (ST 1). Qiao meridian for sleep is mainly because it is connected with eyes through the Bladder Meridian of Foot-Taiyang. For Stomach Meridian of Foot-Yangming is intersected with the Bladder Meridian of Foot-Taiyang in Jingming (BL 1), and intersected with yin and yang qiao meridian beside the mouth and under the eye, once functional disorder of the stomach, it can affect qi movements of the whole body and give rise to various pathological changes that cause insomnia. Meanwhile examples are given to explain the clinical application of treating subborn insomnia with corresponding acupoint of stomach and yang-qiao meridian.

  6. Core sampling system spare parts assessment

    Walter, E.J.

    1995-01-01

    Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts

  7. [Action mechanism of electroacupuncture at stomach meridian acupoints for oxidative damage in rats with gastric ulcer].

    Yang, Zongbao; Wang, Yadong; Liu, Qiong; Liu, Mi; Chen, Huijuan; Chang, Xiaorong

    2016-06-12

    To observe the effects of electroacupuncture (EA) at stomach meridian acupoints on expression of oxidation damage factors in serum and gastric mucosal cells in rats with gastric ulcer, and to explore the mechanism of EA at stomach meridian acupoints for oxidative damage in rats with gastric ulcer. Forty clean-grade SD rats were randomly divided into a normal group, a model group, a stomach meridian group and a gallbladder meridian group, ten rats in each one. Except the normal group, rats in the remaining groups were applied the restraint-cold stress method to establish the model of gastric ulcer. Rats in the normal group and model group received no treatment; rats in the stomach meridian group were treated with EA at "Liangmen" (ST 21) and "Zusanli" (ST 36); rats in the gallbladder meridian group were treated with EA at "Riyue" (GB 24) and "Yanglingquan" (GB 34). The EA was given for 30 min, once a day for 7 days totally. The change of gastric mucosal morphology was observed by routine light microscope; enzyme linked immunosorbent assay was used to detect the expressions of malondialdehyde (MDA), glutathione peroxidase (GSH-px) and tumor necrosis factor-α (TNF-α), interleukin-2(IL-2), interleukin-6(IL-6) in serum and gastric mucosal cells of rats. After treatment, compared with the model group, the gastric mucosal damage index was decreased in the stomach meridian group and gallbladder meridian group (both P stomach meridian group (all P stomach meridian group rats ( P stomach meridian acupoints is likely to inhibit the expressions of oxidative damage factors to promote the repair of gastric mucosal injury, which indicates the correlation between meridians and zang-fu .

  8. A single point acupuncture treatment at large intestine meridian: a randomized controlled trial in acute tonsillitis and pharyngitis.

    Fleckenstein, Johannes; Lill, Christian; Lüdtke, Rainer; Gleditsch, Jochen; Rasp, Gerd; Irnich, Dominik

    2009-09-01

    One out of 4 patients visiting a general practitioner reports of a sore throat associated with pain on swallowing. This study was established to examine the immediate pain alleviating effect of a single point acupuncture treatment applied to the large intestine meridian of patients with sore throat. Sixty patients with acute tonsillitis and pharyngitis were enrolled in this randomized placebo-controlled trial. They either received acupuncture, or sham laser acupuncture, directed to the large intestine meridian section between acupuncture points LI 8 and LI 10. The main outcome measure was the change of pain intensity on swallowing a sip of water evaluated by a visual analog scale 15 minutes after treatment. A credibility assessment regarding the respective treatment was performed. The pain intensity for the acupuncture group before and immediately after therapy was 5.6+/-2.8 and 3.0+/-3.0, and for the sham group 5.6+/-2.5 and 3.8+/-2.5, respectively. Despite the articulation of a more pronounced improvement among the acupuncture group, there was no significant difference between groups (Delta=0.9, confidence interval: -0.2-2.0; P=0.12; analysis of covariance). Patients' satisfaction was high in both treatment groups. The study was prematurely terminated due to a subsequent lack of suitable patients. A single acupuncture treatment applied to a selected area of the large intestine meridian was no more effective in the alleviation of pain associated with clinical sore throat than sham laser acupuncture applied to the same area. Hence, clinically relevant improvement could be achieved. Pain alleviation might partly be due to the intense palpation of the large intestine meridian. The benefit of a comprehensive acupuncture treatment protocol in this condition should be subject to further trials.

  9. [SONG's theory on mast cells and meridian-acupoint and its research prospect].

    Li, Yongming

    2016-10-12

    The historical origin of researches regarding acupuncture and mast cells (MCs) is reviewed, and the hypothesis that dermal MCs might be correlated with the acupuncture phenomena proposed by SONG Jimei in 1977 is introduced. This hypothesis, for the first time, suggests MCs could be the cellular basis of meridian sensation and arrival of qi ( deqi ) of acupoints. With independent tests of several research institutes, currently sufficient evidences prove the scientific values of SONG 's theory as well as its potential values for the basic research and clinical practice of acupuncture. It is reported recently that MCs might receive signals from central nerve system and acupoint stimulation, showing cross-talk effects, therefore, MCs can be sensitized at acupoints. In this paper, with a review of 40-year research evidence, 15 biological characteristics regarding mast cells and acupuncture phenomena are identified, in the meanwhile, 10 key questions and research direction, including the distribution of MCs in skin and its general relationship with meridian-acupoint, etc. are proposed.

  10. Acupuncture meridians demythified. A study using the radioactive tracer method

    Simon, J.; Esquerre, J.P.; Guiraud, R.; Guiraud, G.; Lazorthes, Y.

    1988-01-01

    Radioactive trajectories can be visualized by injecting a radioactive tracer, technetium 99 m, at the site of acupuncture points. To determine the exact nature of these trajectories we performed several experiments on healthy volunteers, and our results may be summarized as follows. The target organs of technetium 99 m, and notably the thyroid gland, were always visualized. The circulating radioactivity, visible on scintiscans and confirmed by venous blood counts, was not negligible. The radioactive trajectories we observed were often divided at their starting point and did not extend along the whole length of the acupuncture meridians they might have made visible. The radioactive trajectories disappeared after venous blockade to reappear when the blockade was lifted. Finally, the radioactive trajectories obtained were very similar after injection at the acupuncture point and at a control point. These findings indicate a lymphatic and venous drainage of the radioactive tracer at the site of injection followed by transportation through the veins, rather than visualization of acupuncture meridians as suggested by some authors [fr

  11. Acupuncture meridians demythified. A study using the radioactive tracer method

    Simon, J.; Esquerre, J.P.; Guiraud, R.; Guiraud, G.; Lazorthes, Y.

    1988-07-01

    Radioactive trajectories can be visualized by injecting a radioactive tracer, technetium 99 m, at the site of acupuncture points. To determine the exact nature of these trajectories we performed several experiments on healthy volunteers, and our results may be summarized as follows. The target organs of technetium 99 m, and notably the thyroid gland, were always visualized. The circulating radioactivity, visible on scintiscans and confirmed by venous blood counts, was not negligible. The radioactive trajectories we observed were often divided at their starting point and did not extend along the whole length of the acupuncture meridians they might have made visible. The radioactive trajectories disappeared after venous blockade to reappear when the blockade was lifted. Finally, the radioactive trajectories obtained were very similar after injection at the acupuncture point and at a control point. These findings indicate a lymphatic and venous drainage of the radioactive tracer at the site of injection followed by transportation through the veins, rather than visualization of acupuncture meridians as suggested by some authors.

  12. [Study on pharmacologic action characteristics of traditional Chinese medicines distributed along liver meridian based on medicinal properties combinations].

    Guo, Hong-Ling; Gu, Hao; Wang, Yun; Qiao, Yan-Jiang

    2014-07-01

    To establish a characterization system of traditional Chinese medicinal properties in line with modern scientific cognition regularity, in order to reveal properties of traditional Chinese medicines distributed along liver meridian and relations of effects of medicinal properties. By collecting data about traditional Chinese medicinal properties recorded in the Pharmacopoeia of the People's Republic of China (2005 Edition), literature and data about pharmacological effects of traditional Chinese medicines recorded in the Chinese Materia Medica, by using the method of association rules, the authors dug pharmacological effect rules corresponds to relevant medicinal property combinations, with the medicinal property combination of traditional Chinese medicines distributed along liver meridian as the target. It was found that either obvious different pharmacological effects or identical pharmacological characteristics existed in traditional Chinese medicines distributed along liver meridian. With the aim to explore the correlations between traditional Chinese medicine medicinal properties and pharmacological effects, the authors linked the traditional Chinese medicine theory with modern research achievements, in order to provide the ideas and methods for interpreting mechanisms of medicinal properties.

  13. 78 FR 15974 - Importer of Controlled Substances, Notice of Application; Meridian Medical Technologies

    2013-03-13

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Importer of Controlled Substances, Notice of Application; Meridian Medical Technologies Pursuant to Title 21 Code of Federal Regulations 1301.34 (a), this is notice that on January 8, 2013, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...

  14. 77 FR 19716 - Importer of Controlled Substances; Notice of Application Meridian Medical Technologies

    2012-04-02

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Importer of Controlled Substances; Notice of Application Meridian Medical Technologies Pursuant to 21 U.S.C. 958(i), the Attorney General shall, prior to... is notice that on January 4, 2012, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...

  15. Opportunistic replacement of fusion power system parts

    Day, J.A.; George, L.L.

    1981-01-01

    This paper describes a maintenance problem in a fusion power plant. The problem is to specify which life limited parts should be replaced when there is an opportunity. The objective is to minimize the cost rate of replacement parts and of maintenance actions while satisfying a power plant availability constraint. The maintenance policy is to look ahead and replace all parts that will reach their life limits within a time called a screen. Longer screens yield greater system availabilities because more parts are replaced prior to their life limits

  16. From Fragments to a museum display: restoration of a Gautier meridian circle

    Granato, Marcus

    2009-07-01

    The Museu de Astronomia e Ciências Afins (MAST), which opened to the public in 1985, is a research institute of the Brazilian Ministry of Science and Technology. One of its main activities is to preserve its collections, especially the most important one, its collection of scientific instruments, which grants MAST its identity as a museum of science and technology. Among the 2,000 objects in the collection there is a Gautier meridian circle that has a 190-mm diameter objective lens and a focal distance of 2,400 mm, with its axis aligned east-west. It should be noted that this instrument was at great risk of being lost to the collection, as it had been left dismantled since the 1960s, and the top part of the dome that sheltered it had been demolished in the 1980s, leaving just a vestibule and the base of the dome, which was in danger of completely collapsing. The intervention philosophy applied was not to put the instrument back in working order, but to allow it to be viewed and understood by the public within a coherent display space. As for the dome, a shelter was built for the instrument using a metal cover of a similar volume and appearance to the original, but with a different function, i.e. it is no longer designed to permit astronomical investigations, but rather to protect the exhibition space and merge harmoniously with the rest of the listed architectural complex. This paper presents information about the history of this meridian circle and its restoration, as well as about the Imperial Observatório do Rio de Janeiro/Observatório Nacional where this instrument was originally used.

  17. Anatomical study on The Arm Greater Yang Small Intestine Meridian Muscle in Human

    Kyoung-Sik, Park

    2004-06-01

    Full Text Available This study was carried to identify the component of Small Intestine Meridian Muscle in human, dividing the regional muscle group into outer, middle, and inner layer. the inner part of body surface were opened widely to demonstrate muscles, nerve, blood vessels and the others, displaying the inner structure of Small Intestine Meridian Muscle. We obtained the results as follows; 1. Small Intestine Meridian Muscle is composed of the muscle, nerve and blood vessels. 2. In human anatomy, it is present the difference between a term of nerve or blood vessels which control the muscle of Meridian Muscle and those which pass near by Meridian Muscle. 3. The inner composition of meridian muscle in human arm is as follows ; 1 Muscle ; Abd. digiti minimi muscle(SI-2, 3, 4, pisometacarpal lig.(SI-4, ext. retinaculum. ext. carpi ulnaris m. tendon.(SI-5, 6, ulnar collateral lig.(SI-5, ext. digiti minimi m. tendon(SI-6, ext. carpi ulnaris(SI-7, triceps brachii(SI-9, teres major(SI-9, deltoid(SI-10, infraspinatus(SI-10, 11, trapezius(Sl-12, 13, 14, 15, supraspinatus(SI-12, 13, lesser rhomboid(SI-14, erector spinae(SI-14, 15, levator scapular(SI-15, sternocleidomastoid(SI-16, 17, splenius capitis(SI-16, semispinalis capitis(SI-16, digasuicus(SI-17, zygomaticus major(Il-18, masseter(SI-18, auriculoris anterior(SI-19 2 Nerve ; Dorsal branch of ulnar nerve(SI-1, 2, 3, 4, 5, 6, br. of mod. antebrachial cutaneous n.(SI-6, 7, br. of post. antebrachial cutaneous n.(SI-6,7, br. of radial n.(SI-7, ulnar n.(SI-8, br. of axillary n.(SI-9, radial n.(SI-9, subscapular n. br.(SI-9, cutaneous n. br. from C7, 8(SI-10, 14, suprascapular n.(SI-10, 11, 12, 13, intercostal n. br. from T2(SI-11, lat. supraclavicular n. br.(SI-12, intercostal n. br. from C8, T1(SI-12, accessory n. br.(SI-12, 13, 14, 15, 16, 17, intercostal n. br. from T1,2(SI-13, dorsal scapular n.(SI-14, 15, cutaneous n. br. from C6, C7(SI-15, transverse cervical n.(SI-16, lesser occipital n. & great auricular n. from

  18. Intradermal Alcian-Blue Injection Method to Trace Acupuncture Meridians

    Baeckkyoung Sung

    2008-06-01

    Full Text Available Objective : In this article, we report on the intradermal Alcian blue staining method for tracing the meridians of acupuncture. Methods : 1% Alcian blue solution was injected into acupoints by using a 0.5mL insulin syringe with a 31-gauge needle, then the skin was incised and was observed under a stereoscopic microscope. The specimens were examined by using immunohistochemical methods and were observed under a confocal laser scanning microscope. Results : A threadlike structure, which was visualized with Alcian blue, existed in dermis layer and proceeded to hypodermis. In this structure, characteristic alignments of rod- shaped nuclei and 1-2μm sized DNA granules were observed. Furthermore, abundant blood capillary plexuses, peripheral nerve endings, and a corpusclelike structure(about 300μm in diameter were visualized in the skin tissues of acupoints. Conclusion : It was concluded that the specific threadlike and corpuscle-like structures corresponded to superficial Bonghan duct and corpuscle, respectively.

  19. Bioceramic Resonance Effect on Meridian Channels: A Pilot Study

    Ting-Kai Leung

    2015-01-01

    Full Text Available Bioceramic is a kind of material which emits nonionizing radiation and luminescence, induced by visible light. Bioceramic also facilitates the breakup of large clusters of water molecules by weakening hydrogen bonds. Hydrogen bond weakening, which allows water molecules to act in diverse ways under different conditions, is one of the key mechanisms underlying the effects of Bioceramic on biophysical and physical-chemical processes. Herein, we used sound to amplify the effect of Bioceramic and further developed an experimental device for use in humans. Thirteen patients who suffered from various chronic and acute illnesses that severely affected their sleep patterns and life quality were enrolled in a trial of Bioceramic resonance (i.e., rhythmic 100-dB sound waves with frequency set at 10 Hz applied to the skin surface of the anterior chest. According to preliminary data, a “Propagated Sensation along Meridians” (PSM was experienced in all Bioceramic resonance-treated patients but not in any of the nine control patients. The device was believed to enhance microcirculation through a series of biomolecular and physiological processes and to subject the specific meridian channels of Traditional Chinese Medicine (TCM to coherent vibration. This noninvasive technique may offer an alternative to needle acupuncture and other traditional medical practices with clinical benefits.

  20. [Study on meridian tropism of medicinal property theory for Chines medicines by supramolecular chemistry (I)].

    He, Fu-yuan; Deng, Kai-wen; Yang, Yan-tao; Zhou, Yi-qun; Shi, Ji-lian; Liu, Wen-long; Tang, Yu

    2015-04-01

    In this paper, based on the special influence of supramolecular chemistry on the basic theory of Chinese medicines ( CM) , the authors further analyzed the history of meridian tropism and natural origins of CM organisms and explained CM ingredients and the universal regularity of the automatic action of the supramolecular "imprinting templates" hole channel structure. After entering human bodies, CMs, as the aggregation of supramolecular "imprinting templates" , automatically seek supramolecular subjects that are matched with their "imprinting templates" in human meridians and organs for the purpose of self-recognition, self-organization, self-assembly and self-replication, so as to generate specific efficacy in meridians and organs, which is reflected as the meridian tropism phenomena at macro level. This regularity can be studied by in vitro and in vivo experimental studies. In vitro methods are mostly supra molecular structure analysis and kinetic and thermodynamic parameter calculation; Whereas in vivo methods are dominated by the analysis on object component distribution, chromatopharmacodynamic parameters and network chromatopharmacodynamic parameters; Particularly, the acupoint-medicine method can simplify to study the supramolecular subject-object relations. Consequently, CM's'meridian tropism reveals the universal regularity for interactions of macromolecular and micromolecular "imprinting templates" of subjects and objects in natural organisms. As the first barrier for the material base of the CM theory and breakthrough in the modernization of the basic CM theory, meridian tropism plays an important role in studies on basic theories of the basic CM theory.

  1. What Are the Parts of the Nervous System?

    ... Email Print What are the parts of the nervous system? The nervous system consists of two main parts: the central nervous system and the peripheral nervous system: The central nervous system is made up of the brain and ...

  2. [Effects of gap junction blocking on the oxygen partial pressure in acupoints of the bladder meridian].

    Wang, Qi; Yu, Wei-Chang; Jiang, Hong-Zhi; Chen, Sheng-Li; Zhang, Ming-Min; Kong, E-Sheng; Huang, Guang-Ying

    2010-12-01

    To explore the relation between gap junction and meridian phenomenon. The oxygen partial pressure in acupoints [see text for formula] and in their corresponding non-acupoints of the Bladder Meridian was observed with the needle-type tissue oxygen tension sensor in the gap junction blocking goats by 1-Heptanol injection and the Connexin 43 (Cx43) gene knockout mice. (1) The oxygen partial pressure in acupoints of Bladder Meridian on goats was higher than that in non-acupoints after 1-Heptanol injection with significant differences between them (both P oxygen partial pressure in acupoints of Bladder Meridian on goats increased significantly after injecting 1-Heptanol as compare with that either injecting normal saline or injecting nothing with significant differences between them (all P oxygen partial pressure in acupoints of the Bladder Meridian was significantly higher than that in the non-acupoint controls in Cx43 wild type (WT) mice (all P oxygen partial pressure between acupoints and non-acupoint controls showed no significant differences (all P > 0.05). (4) In acupoints, the oxygen partial pressure in Cx43 WT mice was significantly higher than that in Cx43 HT mice (all P 0.05). Gap junction maybe the essential factor in signal transduction of acupuncture.

  3. Anders Celsius’ Contributions to Meridian Arc Measurements and the Establishment of an Astronomical Observatory in Uppsala

    Stempels H. C.

    2011-06-01

    Full Text Available Astronomy has been on the curriculum of Uppsala University from at least the middle of the 15th century. However, since Uppsala also was the ecclesiastical centre of Sweden, the acceptance of new ideas, such as the Copernican heliocentric system, was slow. At the same time, more peripheral universities in the Swedish empire, including Dorpat/Tartu, enjoyed a larger freedom. It was not until the early 18th century that a ‘modern’ astronomy emerged in Uppsala. This effort was to a large extent led by Anders Celsius (1701-1744, who was able to establish good international contacts with astronomers in continental Europe. Celsius participated in De Maupertuis’ expedition to the far north of Sweden, in order to measure the meridian arc and determine the shape of the Earth. This paper explores how Celsius became involved in De Maupertuis’ expedition, and how this effort paved the way to the establishment of a fully equipped astronomical observatory, including an extensive collection of books and instruments, most of which survives up to this day.

  4. [Application of problem-based learning in teaching practice of Science of Meridians and Acupoints].

    Wang, Xiaoyan; Tang, Jiqin; Ying, Zhenhao; Zhang, Yongchen

    2015-02-01

    Science of Meridians and Acupoints is the bridge between basic medicine and clinical medicine of acupuncture and moxibustion. This teaching practice was conducted in reference to the teaching mode of problembased learning (PBL), in association with the clinical design problems, by taking as the students as the role and guided by teachers. In order to stimulate students' active learning enthusiasm, the writers implemented the class teaching in views of the typical questions of clinical design, presentation of study group, emphasis on drawing meridian running courses and acupoint locations, summarization and analysis, as well as comprehensive evaluation so that the comprehensive innovative ability of students and the teaching quality could be improved.

  5. Theoretical basis, application, reliability, and sample size estimates of a Meridian Energy Analysis Device for Traditional Chinese Medicine Research

    Ming-Yen Tsai

    Full Text Available OBJECTIVES: The Meridian Energy Analysis Device is currently a popular tool in the scientific research of meridian electrophysiology. In this field, it is generally believed that measuring the electrical conductivity of meridians provides information about the balance of bioenergy or Qi-blood in the body. METHODS AND RESULTS: PubMed database based on some original articles from 1956 to 2014 and the authoŕs clinical experience. In this short communication, we provide clinical examples of Meridian Energy Analysis Device application, especially in the field of traditional Chinese medicine, discuss the reliability of the measurements, and put the values obtained into context by considering items of considerable variability and by estimating sample size. CONCLUSION: The Meridian Energy Analysis Device is making a valuable contribution to the diagnosis of Qi-blood dysfunction. It can be assessed from short-term and long-term meridian bioenergy recordings. It is one of the few methods that allow outpatient traditional Chinese medicine diagnosis, monitoring the progress, therapeutic effect and evaluation of patient prognosis. The holistic approaches underlying the practice of traditional Chinese medicine and new trends in modern medicine toward the use of objective instruments require in-depth knowledge of the mechanisms of meridian energy, and the Meridian Energy Analysis Device can feasibly be used for understanding and interpreting traditional Chinese medicine theory, especially in view of its expansion in Western countries.

  6. The effects of meridian exercise on anxiety, depression, and self-esteem of female college students in Korea.

    Kim, Kwuy Bun; Cohen, Susan M; Oh, Hye Kyung; Sok, Sohyune R

    2004-01-01

    This study examined the effects of meridian exercise on anxiety, depression, and self-esteem of female college students in Korea. The effects of meridian exercise on anxiety, depression, and self-esteem were statistically significant (t = -7.982, P= .000; t= -8.814, P = .000; t = 9.649, P = .000) between the experimental and control group.

  7. Blue whale sightings in Antarctica west of the Greenwich meridian, Januart 2015

    Geelhoed, S.C.V.; Feij, B.; Franeker, van J.A.; Herr, H.; Janinhoff, N.; McKay, S.J.; Muller, S.; Thomisch, K.; Verdaat, J.P.; Viquerat, S.

    2015-01-01

    During the RV Polarstern PS 89 (ANT-XXX/2) expedition from Cape Town to Atka Bay and back, 20 sightings of 26 individual blue whales (Balaenoptera musculus) were recorded in Antarctic waters west of the Greenwich Meridian between 16-20 January 2015. These observations suggest a more westerly

  8. Autonomous Sensory Meridian Response (ASMR) and Frisson: Mindfully Induced Sensory Phenomena That Promote Happiness

    del Campo, Marisa A.; Kehle, Thomas J.

    2016-01-01

    There are many important phenomena involved in human functioning that are unnoticed, misunderstood, not applied, or do not pique the interest of the scientific community. Among these, "autonomous sensory meridian response" ("ASMR") and "frisson" are two very noteworthy instances that may prove to be therapeutically…

  9. Is There Volume Transmission Along Extracellular Fluid Pathways Corresponding to the Acupuncture Meridians?

    Weibo Zhang

    2017-02-01

    Full Text Available Volume transmission is a new major communication signaling via extracellular fluid (interstitial fluid pathways. It was proposed by the current authors that such pathways can explain the meridian phenomena and acupuncture effects. To investigate whether meridian-like structures exist in fish body and operate via volume transmission in extracellular fluid pathways, we injected alcian blue (AB under anesthesia into Gephyrocharax melanocheir, which has a translucent body. The migration of AB could be seen directly and was recorded by a digital camera. The fish was then embedded and cut transversely to observe the position of tracks in three dimensions. Eight longitudinal threadlike blue tracks were recognized on the fish. The positions of these threadlike tracks were similar to meridians on the human body. Transverse sections showed that these tracks distributed to different layers of distinct subcutaneous loose connective tissues and intermuscular septa. Lymphatic vessels were sometimes associated with the extracellular blue tracks where the migration of AB occurred. Extracellular fluid pathways were found on fish through their transport of AB. These pathways operating via volume transmission appeared to be similar in positions and functions to the acupuncture meridians in Chinese medicine.

  10. Tapping Their Patients' Problems Away? Characteristics of Psychotherapists Using Energy Meridian Techniques

    Gaudiano, Brandon A.; Brown, Lily A.; Miller, Ivan W.

    2012-01-01

    Objective: The objective was to learn about the characteristics of psychotherapists who use energy meridian techniques (EMTs). Methods: We conducted an Internet-based survey of the practices and attitudes of licensed psychotherapists. Results: Of 149 survey respondents (21.4% social workers), 42.3% reported that they frequently use or are inclined…

  11. Radiant Heating and Cooling Systems. Part one

    Kim, Kwan Woo; Olesen, Bjarne W.

    2015-01-01

    The use of radiant heating systems has several thousand years of history.1,2 The early stage of radiant system application was for heating purposes, where hot air from flue gas (cooking, fires) was circulated under floors or in walls. After the introduction of plastic piping water-based radiant...

  12. Radiant Heating and Cooling Systems. Part two

    Kim, Kwan Woo; Olesen, Bjarne W.

    2015-01-01

    Control of the heating and cooling system needs to be able to maintain the indoor temperatures within the comfort range under the varying internal loads and external climates. To maintain a stable thermal environment, the control system needs to maintain the balance between the heat gain...

  13. Planning for rural energy system: Part 2

    Devadas, V.

    2001-01-01

    This paper discusses the central importance of energy inputs in development, and presents the complex interactions within subsystems that contribute a Rural Energy System. This paper also brings about the importance of the primary data for realistic renewable energy planning at the micro level in a given rural system. Factors that render secondary data somewhat inadequate for such applications are discussed. The differences between energy related data from secondary and primary sources in respect of representative villages in Kanyakumari District of Tamil Nadu, India, are detailed. A rural system model for computing the output from various components of a rural system is also presented. This projection is made by making use of a set of technical coefficients, which relate the inputs to the outputs from individual segments of the rural production system. While some of the technical coefficients are developed based on previously published data, a large number have been quantified on the basis of careful survey. The usefulness of the model is discussed. The paper also presents a Linear Programming Model for optimum resource allocation in a rural system. The objective function of the Linear Programming Model is maximizing the revenue of the rural system where in optimum resource allocation is made subject to a number of energy and non-energy related relevant constraints. The model also quantifies the major yields as well as the byproducts of different sectors of the rural economic system. (Author)

  14. The Meanings and Prospects of Primo Vascular System from the Viewpoint of Historical Context

    Jongwook Jeon

    2013-01-01

    Full Text Available The aim of this overview is to evaluate the primo vascular system research in the context of the history of meridian theory and the modern meanings of it. The 12 meridian systems were naturally presupposed in the conventional study of the meridians and acupuncture. But the excavations of Mawang-tui old documents and Sichuan Mianyang wooden puppet revealed the primordial concepts of meridians uncolored by the numerological cosmology of Han era. Further, the meridian map of horse, cow and hawk show another resemblance to the primordial type of meridians. Modern meridian theory has been challenged by the material based scientific theory and the primo vascular theory presents the most radical answer for it. It aims to reveal the anatomical entity of meridians. However, the study of primo vascular system is unexpectedly opening the new horizon of scientific integration of East and West beyond the mere searching for anatomical entity of meridians. Conclusions we have drawn from the historical reviews are, (1 the surface structure of the body reflects the physiopathological changes of inside the body, (2 by stimulating specific sites on the surface, it is possible to acquire therapeutic effects of certain symptoms, and (3 numbers and locations of meridian acupoints are variable among traditional meridian theories.

  15. Automatic diagnostic system for measuring ocular refractive errors

    Ventura, Liliane; Chiaradia, Caio; de Sousa, Sidney J. F.; de Castro, Jarbas C.

    1996-05-01

    Ocular refractive errors (myopia, hyperopia and astigmatism) are automatic and objectively determined by projecting a light target onto the retina using an infra-red (850 nm) diode laser. The light vergence which emerges from the eye (light scattered from the retina) is evaluated in order to determine the corresponding ametropia. The system basically consists of projecting a target (ring) onto the retina and analyzing the scattered light with a CCD camera. The light scattered by the eye is divided into six portions (3 meridians) by using a mask and a set of six prisms. The distance between the two images provided by each of the meridians, leads to the refractive error of the referred meridian. Hence, it is possible to determine the refractive error at three different meridians, which gives the exact solution for the eye's refractive error (spherical and cylindrical components and the axis of the astigmatism). The computational basis used for the image analysis is a heuristic search, which provides satisfactory calculation times for our purposes. The peculiar shape of the target, a ring, provides a wider range of measurement and also saves parts of the retina from unnecessary laser irradiation. Measurements were done in artificial and in vivo eyes (using cicloplegics) and the results were in good agreement with the retinoscopic measurements.

  16. An Examination of Personality Traits Associated with Autonomous Sensory Meridian Response (ASMR)

    Fredborg, Beverley; Clark, Jim; Smith, Stephen D.

    2017-01-01

    Autonomous Sensory Meridian Response (ASMR) is a perceptual condition in which the presentation of particular audio-visual stimuli triggers intense, pleasurable tingling sensations in the head and neck regions, which may spread to the periphery of the body. These triggering stimuli are often socially intimate in nature, and usually involve repetition of movements and/or sounds (e.g., hearing whispering, watching someone brush her hair). Reports of ASMR experiences first appeared in online com...

  17. Autonomous Meridian Sensory Response – from Internet subculture to audiovisual therapy

    Garro, D

    2017-01-01

    ASMR (Autonomous Sensory Meridian Response) is the name given to a pleasant sensation that can be felt most commonly on the scalp and can be triggered by various gentle sounds (like whispers, crinkles or tapping), smooth and repetitive visual stimuli, personal attention (like the touch of a hairdresser or a masseur) or other events. ASMR is often associated with a general feeling of relaxation and peace. Whilst academic research on the sociological, artistic, sensory and cognitive dimensions ...

  18. Autonomous Sensory Meridian Response (ASMR): a flow-like mental state

    Emma L. Barratt; Nick J. Davis

    2015-01-01

    Autonomous Sensory Meridian Response (ASMR) is a previously unstudied sensory phenomenon, in which individuals experience a tingling, static-like sensation across the scalp, back of the neck and at times further areas in response to specific triggering audio and visual stimuli. This sensation is widely reported to be accompanied by feelings of relaxation and well-being. The current study identifies several common triggers used to achieve ASMR, including whispering, personal attention, crisp s...

  19. Sensory determinants of the autonomous sensory meridian response (ASMR): Understanding the triggers

    Barratt, EL; Spence, CJ; Davis, NJ

    2017-01-01

    The autonomous sensory meridian response (ASMR) is an atypical sensory phenomenon involving electrostatic-like tingling sensations in response to certain sensory, primarily audio-visual, stimuli. The current study used an online questionnaire, completed by 130 people who self-reported experiencing ASMR. We aimed to extend preliminary investigations into the experience, and establish key multisensory factors contributing to the successful induction of ASMR through online media. Aspects such as...

  20. On the totality of periodic motions in the meridian plane of a magnetic dipole

    Markellos, V.V.; Halioulias, A.A.

    1977-01-01

    The structure of the periodic solutions of the Stoermer problem, representing the magnetic field of the Earth, is examined by considering the equatorial oscillations of the charged particle and their 'vertical' bifurcations with meridian periodic oscillations. An infinity of new families of simple-periodic oscillations are found to exist in the vicinity of the 'thalweg' and four such new families are actually established by numerical integration. (Auth.)

  1. Patterns of Energy Imbalance of the Meridians in Patients with Temporomandibular Dysfunction.

    Rasera Zotelli, Vera L; Grillo, Cássia M; Bressiani Gil, Maria L; Wada, Ronaldo S; Sato, Jorge E; de Sousa, Maria da Luz R

    2018-02-01

    Temporomandibular dysfunction (TMD) is a set of changes that affects the muscles of mastication, temporomandibular joint, teeth, and associated periodontal and orofacial structures. According to Traditional Chinese Medicine, the imbalance of energy (Qi) circulating in the acupuncture meridians is always the primary etiologic cause of any physical manifestation. The aim of this study was to describe the patterns of Qi imbalance in patients with TMD by means of an objective measurement. The clinical study was conducted at the Piracicaba Dental School (FOP/Unicamp), in Piracicaba-SP, Brazil. We evaluated 40 adult volunteers with TMD. The Qi measurement was carried out by the researcher using the Ryodoraku method using 24 points representing the 12 acupuncture meridians: LU9 (Taiyuan), PC7 (Daling), HT7 (Shemen), SI5 (Yanggu), TE4 (Yangchi), LI5 (Yangxi), SP3 (Taibai), LR3 (Taichong), KI3 (Taixi), BL64 (Jinggu), GB40 (Qiuxu), and ST42 (Chongyang). The average total Qi of 40 volunteers (21.7 μA ± 1.5), was below the normal range (40-60 μA) and was classified as deficiency of Qi (empty). The coupled meridians that showed the highest Qi imbalance were the kidney (29.4 μA ± 2.8) and bladder (13.8 μA ± 1). The Qi planes with greatest imbalance were the Shao Yang and Shao Yin. In conclusion, volunteers with TMD presented a pattern of Qi deficiency, and the most prevalent imbalance patterns identified were in the kidney and bladder coupled meridians and in the energetic planes Shao Yin (heart/kidney) and Shao Yang (triple energizer/gall bladder). Copyright © 2017. Published by Elsevier B.V.

  2. Patterns of Energy Imbalance of the Meridians in Patients with Temporomandibular Dysfunction

    Vera L. Rasera Zotelli

    2018-02-01

    Full Text Available Temporomandibular dysfunction (TMD is a set of changes that affects the muscles of mastication, temporomandibular joint, teeth, and associated periodontal and orofacial structures. According to Traditional Chinese Medicine, the imbalance of energy (Qi circulating in the acupuncture meridians is always the primary etiologic cause of any physical manifestation. The aim of this study was to describe the patterns of Qi imbalance in patients with TMD by means of an objective measurement. The clinical study was conducted at the Piracicaba Dental School (FOP/Unicamp, in Piracicaba-SP, Brazil. We evaluated 40 adult volunteers with TMD. The Qi measurement was carried out by the researcher using the Ryodoraku method using 24 points representing the 12 acupuncture meridians: LU9 (Taiyuan, PC7 (Daling, HT7 (Shemen, SI5 (Yanggu, TE4 (Yangchi, LI5 (Yangxi, SP3 (Taibai, LR3 (Taichong, KI3 (Taixi, BL64 (Jinggu, GB40 (Qiuxu, and ST42 (Chongyang. The average total Qi of 40 volunteers (21.7 μA ± 1.5, was below the normal range (40–60 μA and was classified as deficiency of Qi (empty. The coupled meridians that showed the highest Qi imbalance were the kidney (29.4 μA ± 2.8 and bladder (13.8 μA ± 1. The Qi planes with greatest imbalance were the Shao Yang and Shao Yin. In conclusion, volunteers with TMD presented a pattern of Qi deficiency, and the most prevalent imbalance patterns identified were in the kidney and bladder coupled meridians and in the energetic planes Shao Yin (heart/kidney and Shao Yang (triple energizer/gall bladder.

  3. Trace elements in bottom sediments of the Barents Sea on the standard section "Kola Meridian"

    Lapteva A. M.; Plotitsyna N. F.

    2017-01-01

    The levels of trace metals (Cu, Zn, Ni, Cr, Mn, Co, Pb, Cd, Hg) and arsenic (As) in samples of bottom sediments from the Barents Sea on eight stations of the standard section "Kola Meridian" have been investigated. Trace elements have been determined on atomic absorption spectrophotometer AA-6800 with mercury-hydride attachment HVG-1 of the company Shimadzu (Japan) by the methods of flaming (acetylene – air) and electrothermal atomization. Common and very toxic trace elements incl...

  4. The Human Resources Management System: Part 1.

    Ceriello, Vincent R.

    1982-01-01

    Presents a systematic and disciplined approach to planning for the development and implementation of an information system which will collect, store, maintain, and report human resources data. Discusses guidelines, priorities, training requirements, security, auditing, interface with payroll, and personnel reporting. (CT)

  5. Respiratory system. Part 2: Gaseous exchange.

    McLafferty, Ella; Johnstone, Carolyn; Hendry, Charles; Farley, Alistair

    This article, which isthe last in the life sciences series and the second of two articles on the respiratory system, describes gaseous exchange in the lungs, transport of oxygen and carbon dioxide, and internal and external respiration. The article concludes with a brief consideration of two conditions that affect gas exchange and transport: carbon monoxide poisoning and chronic obstructive pulmonary disease.

  6. Effects of Meridian Acupressure Massage on Body Composition, Edema, Stress, and Fatigue in Postpartum Women.

    Jung, Geum-Sook; Choi, In-Ryoung; Kang, Hee-Young; Choi, Eun-Young

    2017-10-01

    This study aims to investigate the effects of meridian acupressure massage on body composition, edema, stress, and fatigue in postpartum women. A quasi-experimental design with a nonequivalent control group was utilized. The Postpartum Care Center of Women's Hospital in Gwangju City, Republic of Korea. The study group consisted of 39 postpartum women, 19 in the experimental group and 20 in the control group, recruited from the postpartum care center of Women's Hospital in Gwangju city, South Korea. The experimental group was provided with meridian acupressure massage for 90 min daily over 5 days as an experimental therapy. Body composition (body weight, BMI, total body water, ECW ratio, LBM, and body fat) Edema (subjective edema, average girth of the upper limbs, and average girth of the lower limbs), Stress (psychological stress and physical stress), and Fatigue. The experimental group demonstrated a significantly larger decrease compared with the control group in measures of body composition, edema, total subjective stress, psychological stress, and subjective fatigue. Meridian acupressure massage can hasten the return to original body composition after childbirth.

  7. Surveying the Vienna Meridian from Brno to Varaždin

    Miljenko Solarić

    2016-12-01

    Full Text Available The introduction provides a brief overview of using trigonometric chains for determining meridian arc lengths in Europe, as well as their extension to trigonometric networks in order to produce contemporary accurate maps in France. After Ruđer Bošković had visited Croatian-Hungarian Queen and Roman-German Empress Maria Theresa, she ordered Jesuit Joseph Liesganig to survey the meridian from Brno (Soběšice, over Vienna and Graz to Varaždin by establishing and surveying a trigonometric chain. That distance amounts to 320 km, i.e. the difference between latitude of the starting and finishing points of the chain equaled 2° 56' 45.85''. Two baselines were measured directly between Wiener Neustadt and Neunkirchen of 6410.903 Vienna fathom (12 158.175 m and between Seyring and Glizendorf in the Moravian field (Moravské pole, Marchfeld of 6387.862 Vienna fathom (12 114.478 m. Liesganig published previous Vienna Meridian survey results in Philosophical Transactions in London in 1768 and the final results in Latin in Dimensio Graduum Meridiani Viennensis et Hungarici in 1770. His results were quickly criticized and subsequently subjected to validation. Trigonometric point Varaždin is the first and oldest trigonometric point in Croatia.

  8. Full Meridian of Glory Perilous Adventures in the Competition to Measure the Earth

    Murdin, Paul

    2009-01-01

    The Paris Meridian is the name of the line running north-south through the astronomical observatory in Paris. One of the original intentions behind the founding of the Paris Observatory was to determine and measure this line. To that end, the French government financed the Paris Academy of Sciences to do so in the seventeenth to nineteenth centuries employing both astronomers – people who study and measure the stars – and geodesists – people who study and measure the Earth. This book is about what they did and why. Full Meridian of Glory is the first English language presentation of this historical material in its entirety. It is an attractively written story of the scientists who created the Paris Meridian. They collaborated and worked together in alliances, like scientists everywhere; they also split into warring factions. They transcended national and political disputes, as scientists do now, their eyes fixed on ideals of accuracy, truth and objectivity. Yet also when their work served national inter...

  9. Advanced loose parts detection system for nuclear power plants

    Por, G.; Szappanos, G.

    2000-01-01

    The importance of loose part detection is discussed. The consequences of a relatively big (7.7 kg) loose part found in a WWER-440 NPP are discussed. A portable loose part monitoring system is presented, which is based on sequential probability ratio test. (author)

  10. Complement System Part II: Role in Immunity

    Merle, Nicolas S.; Noe, Remi; Halbwachs-Mecarelli, Lise; Fremeaux-Bacchi, Veronique; Roumenina, Lubka T.

    2015-01-01

    The complement system has been considered for a long time as a simple lytic cascade, aimed to kill bacteria infecting the host organism. Nowadays, this vision has changed and it is well accepted that complement is a complex innate immune surveillance system, playing a key role in host homeostasis, inflammation, and in the defense against pathogens. This review discusses recent advances in the understanding of the role of complement in physiology and pathology. It starts with a description of complement contribution to the normal physiology (homeostasis) of a healthy organism, including the silent clearance of apoptotic cells and maintenance of cell survival. In pathology, complement can be a friend or a foe. It acts as a friend in the defense against pathogens, by inducing opsonization and a direct killing by C5b–9 membrane attack complex and by triggering inflammatory responses with the anaphylatoxins C3a and C5a. Opsonization plays also a major role in the mounting of an adaptive immune response, involving antigen presenting cells, T-, and B-lymphocytes. Nevertheless, it can be also an enemy, when pathogens hijack complement regulators to protect themselves from the immune system. Inadequate complement activation becomes a disease cause, as in atypical hemolytic uremic syndrome, C3 glomerulopathies, and systemic lupus erythematosus. Age-related macular degeneration and cancer will be described as examples showing that complement contributes to a large variety of conditions, far exceeding the classical examples of diseases associated with complement deficiencies. Finally, we discuss complement as a therapeutic target. PMID:26074922

  11. Pellet to Part Manufacturing System for CNCs

    Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chesser, Phillip C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lloyd, Peter D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bandari, Yashwanth Kumar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jones, Jason [Hybrid Manufacturing Technologies, Swadlincote (United Kingdom); Gaul, Katherine T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2018-03-14

    Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with Hybrid Manufacturing Technologies to develop a compact prototype composite additive manufacturing head that can effectively extrude injection molding pellets. The head interfaces with conventional CNC machine tools enabling rapid conversion of conventional machine tools to additive manufacturing tools. The intent was to enable wider adoption of Big Area Additive Manufacturing (BAAM) technology and combine BAAM technology with conventional machining systems.

  12. [Characteristics of supramolecular imprinting template on liver meridian tropism of traditional Chinese medicine based on molecular connectivity index].

    Fan, Shi-Qi; Li, Sen; Liu, Jin-Ling; Yang, Jiao; Hu, Chao; Zhu, Jun-Ping; Xiao, Xiao-Qin; Liu, Wen-Long; He, Fu-Yuan

    2017-01-01

    The molecular connectivity index was adopted to explore the characteristics of supramolecular imprinting template of herbs distributed to liver meridian, in order to provide scientific basis for traditional Chinese medicines(TCMs) distributed to liver meridian. In this paper, with "12th five-year plan" national planning textbooks Science of Traditional Chinese Medicine and Chemistry of Traditional Chinese Medicine as the blueprint, literatures and TCMSP sub-databases in TCM pharmacology of northwest science and technology university of agriculture and forestry were retrieved to collect and summarize active constituents of TCM distributed to liver meridian, and calculate the molecular connectivity index. The average molecular connectivity index of ingredients distributed to liver meridian was 9.47, which was close to flavonoid glycosides' (9.17±2.11) and terpenes (9.30±3.62). Therefore, it is inferred that template molecule of liver meridian is similar to physicochemical property of flavonoid glycosides and terpenes, which could be best matched with imprinting template of liver meridian. Copyright© by the Chinese Pharmaceutical Association.

  13. Automated System Marketplace 1993. Part I: Focus on Minicomputers.

    Bridge, Frank R.

    1993-01-01

    The first part of the annual automation marketplace survey examines minicomputer systems in libraries. Highlights include vendor consolidation and acquisitions; system interconnection; networked databases; products related to the Americans with Disabilities Act; multimedia; vendor installations worldwide; academic versus public library…

  14. An expert system for spare parts inventory control

    Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

    1987-01-01

    This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

  15. Space nuclear power systems, Part 2

    El-Genk, M.S.; Hoover, M.D.

    1992-01-01

    This volume, number two of three, contains the reviewed and edited papers were being presented at the Ninth Symposium in Albuquerque, New Mexico, 12--16 January 1992. The objective of the symposium, and hence these volumes, is to summarize the state of knowledge in the area of space nuclear power and propulsion and to provide a forum at which the most recent findings and important new developments can be presented and discussed. Topics included is this volume are: reactor and power systems control; thermionic energy conversion; space missions and power needs; key issues in nuclear and propulsion; nuclear thermal propulsion; manufacturing and processing; thermal management; space nuclear safety; and nuclear testing and production facilities

  16. System-oriented inventory models for spare parts

    Basten, R.J.I.; Houtum, van G.J.J.A.N.

    2014-01-01

    Stocks of spare parts, located at appropriate locations, can prevent long downtimes of technical systems that are used in the primary processes of their users. Since such downtimes are typically very expensive, generally system-oriented service measures are used in spare parts inventory control.

  17. Modern diagnostic systems for loose parts, vibration and leakage monitoring

    Kunze, U.

    1997-01-01

    The modern diagnostic systems for loose parts, vibration and leakage monitoring of Siemens marked improvements in signal detection, ease of operation, and the display of information. The paper gives an overview on: Loose parts monitoring system KUeS '95 - a computer-based system. The knowledge and experience about loose parts detection incorporated into this system can be characterized as ''intelligence''. Vibration monitoring system SUeS '95 - a fully automated system for early detection of changes in the vibration patterns of the reactor coolant system components and reactor pressure vessel internals. Leak detection system FLUeS - a system that detects even small leaks in steam-carrying components and very accurately determines their location. Leaks are detected on the moisture distribution in a sample air column into which the escaping steam locally diffuses. All systems described represent the latest state of technology. Nevertheless a considerable amount of operational experience can be reported. (author). 5 refs, 10 figs

  18. [Antirheumatic substance and meridian tropism of Loranthus parasiticus based on "syndrome-efficacy-analysis of biological samples"].

    Li, Ling-Ling; Wang, Jing; Cui, Ying; Wen, Pu; Guan, Jun; Yang, Shu; Ma, Kai

    2016-05-01

    To study the antirheumatic substance of Loranthus parasiticus and observe the relationship between its in vivo distribution and meridian tropism in rats by establishing adjuvant arthritis models corresponding to effectiveness. All rats except the negative control group were injected with 0.1 mL Freund's complete adjuvant on the left foot. After 8 days, the rats in negative control group and model group were given with normal saline while the rats in positive control group were given with tripterygium glycosides suspension 10 mg•kg-1, and the rats in L. parasiticus treatment groups were given with high(10 g•kg ⁻¹), medium(5 g•kg ⁻¹) and low(2.5 g•kg ⁻¹) dose decoction for 21 days. The left rear ankle joint diameter of rats were measured every 7 days from the 9th day of modeling. On the 22nd day, eyeball blood of part rats in L. parasiticus high-dose group was taken at different time points, and then they were sacrificed to take heart, liver, spleen, lung, kidney, stomach, large intestine, small intestine and brain tissues. For the remaining rats, eyeball blood was taken 30 min after drug treatment, and their left rear ankle joints were taken to detect interleukin (IL)-1β and tumor necrosis factor (TNF)-α levels in serum by ELISA method; rutin, avicularin and quercitrin levels in the tissues of high-dose group were detected by HPLC; pharmacokinetic parameters were analyzed by using DAS 2.0. Our results showed that L. parasiticus decoction could significantly improve the paw edema situation of adjuvant arthritis model rats, and reduce IL-1β and TNF-α levels in rat serum. The in vivo efficacy substance analysis in rats showed that rutin was only present in the stomach with a small amount. AUC0-t of avicularin was stomach > small intestine > kidney, and the duration time in vivo was kidney=stomach > small intestine > lung > heart. AUC0-t of quercitrin was stomach > kidney > liver > heart > lung > spleen > small intestine > brain > large intestine

  19. Comparing complementary alternative treatment for chronic shoulder pain of myofascial origin: Collateral meridian therapy versus local tender area-related meridians therapy.

    Pan, Ru-Yu; Hsu, Yung-Chi; Wong, Chih-Shung; Lin, Shinn-Long; Li, Tsung-Ying; Cherng, Chen-Hwan; Ko, Shan-Chi; Yeh, Chun-Chang

    2016-08-01

    The aim of this study was to compare the short-term outcomes between 2 different treatments for unilateral chronic shoulder pain of myofascial origin, that is, local tender area related meridians (LTARMs) treatment and collateral meridian therapy (CMT), which were performed 6 times over a period of 4 weeks.Seventy patients with unilateral shoulder pain of chronic myofascial origin were enrolled. The patients were randomly assigned to 2 different treatment groups: 1 group received CMT (n = 35) and the other received LTARM (n = 35). Before and after the 2 treatment processes, all patients rated their overall pain intensity on a visual analogue scale (VAS) and a validated 13-question shoulder pain and disability index (SPADI) questionnaire was used to measure shoulder pain and functional impairment after therapy for 4 weeks.After CMT, the pain intensity was reduced after CMT. VAS score is reduced from 5.90 ± 2.07 (a mean of 5.90 and standard deviation of 2.07) to 3.39 ± 1.2. This was verified by the SPADI pain subscale scores (from 0.58 ± 0.193 to 0.33 ± 0.14). The pain-relief effect of CMT was significantly better than that of LTARM (VAS score from 5.78 ± 1.64 to 4.58 ± 1.40; P pain subscale score from 0.58 ± 0.16 to 0.45 ± 0.14, P pain, whereas the VAS scores for moderate pain were even higher in the LTARM group in 75% of patients (P chronic shoulder pain of myofascial origin than the LTARM treatment, where treatment with the former resulted in better functional recovery after 4 weeks than the latter.

  20. Quality assurance in a cask fleet parts control system

    Fernandez, C.; Shappert, L.B.

    1992-01-01

    This paper discusses applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 which are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

  1. Quality assurance in a cask fleet parts control system

    Fernandez, C.; McCreery, P.N.; Shappert, L.B.

    1991-01-01

    Applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

  2. Moxibustion in Early Chinese Medicine and Its Relation to the Origin of Meridians: A Study on the Unearthed Literatures

    Chang Huang

    2017-01-01

    Full Text Available Moxibustion is an integral part of Traditional Chinese Medicine (TCM. It achieved higher level of recognition and had more general application in ancient times than in contemporary life. As the vital historical sources, the records of unearthed literatures offered precious insights to Chinese social life pattern and medical practice in Qin and Han dynasties (221 BC–220 AD. There was no surprise that the bamboo and silk documents excavated from Mawangdui (马王堆 tomb, Hantanpo (旱滩坡 tomb, and other relics had a large amount of texts relevant to moxibustion. This research sorted moxibustion recordings from seven unearthed literatures and discovered that moxibustion had been developed into different modalities and utilized to treat many diseases at that time. In addition, the indications, contraindications of moxibustion, and the method of postmoxibustion care were also discussed. On this basis, some hints were provided to support the hypothesis that the practice of moxibustion led to the discovery of meridians. All our preliminary results in the research have drawn attention for this old therapy and given a new source for its application in clinic and scientific research.

  3. Automatic TLI recognition system. Part 1: System description

    Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

    1994-05-01

    This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

  4. Parts of the Whole: Approaching Education as a System

    Dorothy Wallace

    2009-07-01

    Full Text Available An educational system is a highly coupled complex system of inputs, outputs, sensors and actuators. Using an engineering perspective, this column begins the process of naming and categorizing parts of the system. It then focuses on teachers as one part of a large system, and analyzes the forces that influence how teachers work, and that draw or repel individuals to a teaching career. The growing shortage of qualified teachers can be explained by properties of the system as a whole that determine the context in which teachers do their job.

  5. 湖湘五经配伍"推经治脏"治疗CFS的理论与应用%The Treatment of"Push Meridians to Treat Organs"in Huxiang Five Meridians Compatibility for CFS--Theory and Application

    李武; 彭亮; 刘小卫; 王德军; 杨舟; 于隽; 李铁浪; 章薇

    2015-01-01

    Push meridians to treat organs, which has significant curative effect on CFS, is an important branch of"acupuncture and massage academ-ic school of Huxiang five meridians compatibility", which is guided by theory of"five meridians compatibility"in infantile massage then combined with the characteristics of adult massage, and has developed into adult"big five meridians"that can regulate the each organ's function totally from the thought of Xiangxi Liu's infantile massage five meridians compatibility for the whole regulation of organs' function and the theory of internal or-gans and channels in traditional Chinese medicine.%推经治脏是"湖湘五经配伍针推学术流派"的重要分支,其在小儿推拿"五经配伍"理论指导下结合成人推拿特点,基于湘西刘氏小儿推拿五经配伍对脏腑功能的整体调节思想和传统中医脏腑经络理论发展为成人"大五经"调节脏腑功能,从整体上调节各脏腑功能,对慢性疾病CFS疗效显著.

  6. [Comparison of the compilation features of Science of Meridians and Acupoints among different editions].

    Chen, Xiaojun

    The compilation features of Jingluo Shuxue Xue ( Science of Meridians and Acupoints ) among different editions were summarized and analyzed. Jingluo Xue ( Science of Meridians ) and Shuxue Xue ( Science of Acupoints ) published by Shanghai Scientific and Technical Publishers in 1984 are the pioneer as the textbook for the education of acupuncture discipline for the bachelor degree, but there is the big controversy for the editions in 1996. These two books were combined as one, titled Science of Meridians and Acupoints , 2013 edition, published by China Press of Traditional Chinese Medicine. It is concise and coherent in content and is regarded as the milestone in the history of textbook compilation. This book was re-edited in 2007 without major changes in content. The one in 2009 was revised a lot on the basis of the original several editions, published by Shanghai Scientific and Technical Publishers. But unfortunately, it did not bring the big impacts in China. The edition in 2012, published by China Press of Traditional Chinese Medicine had made the innovations besides integrating the achievements of the previous editions, characterized as preciseness and conciseness. By contrast, the edition in 2012, published by People's Medical Publishing House was accomplished by simple modification on the basis of the editions in 2003 and in 2007, without great innovation. Regarding the on-going publication of the textbooks in "the 13th five-year plan", it is viewed that the new edition of textbook should maintain the general framework of "the 12th five-year plan", based on which, a few questions should be revised appropriately. Additionally, "less words, more illustration" should be the basic principle for the revision of the new edition.

  7. Multiple excitation of supports - Part 2 : Implementation in TUBO system

    Galeao, A.C.N.R.; Barbosa, H.J.C.

    1980-12-01

    From the formulation of multiple excitation support problem, discussed in the first part of this work, and with the use of numerical techniques presented there, we discuss in this second part, the implementation in TUBO system, the follow procedure: Direct integration, Modal overlap, Spectral response emphasizing the aspects related to supports excitation. Finally, we present two numerical examples of TUBO system utilization in the solution of support movement problem. The several implemented computational procedures are compared. (E.G.) [pt

  8. Tolerance and nature of residual refraction in symmetric power space as principal lens powers and meridians change.

    Abelman, Herven; Abelman, Shirley

    2014-01-01

    Unacceptable principal powers in well-centred lenses may require a toric over-refraction which differs in nature from the one where correct powers have misplaced meridians. This paper calculates residual (over) refractions and their natures. The magnitude of the power of the over-refraction serves as a general, reliable, real scalar criterion for acceptance or tolerance of lenses whose surface relative curvatures change or whose meridians are rotated and cause powers to differ. Principal powers and meridians of lenses are analogous to eigenvalues and eigenvectors of symmetric matrices, which facilitates the calculation of powers and their residuals. Geometric paths in symmetric power space link intended refractive correction and these carefully chosen, undue refractive corrections. Principal meridians alone vary along an arc of a circle centred at the origin and corresponding powers vary autonomously along select diameters of that circle in symmetric power space. Depending on the path of the power change, residual lenses different from their prescription in principal powers and meridians are pure cross-cylindrical or spherocylindrical in nature. The location of residual power in symmetric dioptric power space and its optical cross-representation characterize the lens that must be added to the compensation to attain the power in the prescription.

  9. Intelligent control of HVAC systems. Part I: Modeling and synthesis

    Adrian TOADER

    2013-03-01

    Full Text Available This is the first part of a work on intelligent type control of Heating, Ventilating and Air-Conditioning (HVAC systems. The study is performed from the perspective of giving a unitary control method to ensure high energy efficiency and air quality improving. To illustrate the proposed HVAC control technique, in this first part it is considered as benchmark problem a single thermal space HVAC system. The construction of the mathematical model is performed only with a view to obtain a framework of HVAC intelligent control validation by numerical simulations. The latter will be reported in a second part of the study.

  10. Systems engineering: A formal approach. Part 1: System concepts

    Vanhee, K. M.

    1993-03-01

    Engineering is the scientific discipline focused on the creation of new artifacts that are supposed to be of some use to our society. Different types of artifacts require different engineering approaches. However, in all these disciplines the development of a new artifact is divided into stages. Three stages can always be recognized: Analysis, Design, and Realization. The book considers only the first two stages of the development process. It focuses on a specific type of artifacts, called discrete dynamic systems. These systems consist of active components of actors that consume and produce passive components or tokens. Three subtypes are studied in more detail: business systems (like a factory or restaurant), information systems (whether automated or not), and automated systems (systems that are controlled by an automated information system). The first subtype is studied by industrial engineers, the last by software engineers and electrical engineers, whereas the second is a battlefield for all three disciplines. The union of these disciplines is called systems engineering.

  11. Development of an enhanced loose parts monitoring system (LPMS)

    Choi, Y. C.; Park, J. H.; Yoon, D. B.; Choi, K. S.; Sohn, C. H.

    2006-01-01

    LPMS (loose parts monitoring system) is one of the most important structural integrity monitoring systems. It is operated for a early detection of the impacts by loosened or detached metallic, objects on the primary pressure boundary in a nuclear power plant. The impacted parts might cause flow blockage in the fuel channel, prevent the control rod from moving properly, damage the pump impeller, and give rise to cracks on the steam generator tube sheet, etc. In Korea, The LPMS is currently operating in all of the nuclear power plants as a subsystem in the NIMS (NSSS Integrity Monitoring System), However the performances are being deteriorated in both the hardware and software since it was designed in 1980's. In particular the system is not capable of promptly responding to the continuously triggered impacts in a short period failing to monitor the real loose parts. Also the diagnostic tools to estimate the location and the mass or energy of the impact source have not been reflected. Therefore, a new loose parts monitoring system has been developed to improve the capabilities of the current one and ultimately to replace it. An enhanced Loose Parts Monitoring System(LPMS) has been developed by KAERI(Korea Atomic Energy Research Inst.), not only to improve the performance of an on-line signal processing for a monitoring system but also to enhance the evaluation technique of the true impact signals by loose parts. This new system has taken into account the state-of-the-art technology to cover the problems with the conventional system. (authors)

  12. Interstitial Fluid Flow: The Mechanical Environment of Cells and Foundation of Meridians

    Wei Yao

    2012-01-01

    Full Text Available Using information from the deep dissection, microobservation, and measurement of acupoints in the upper and lower limbs of the human body, we developed a three-dimensional porous medium model to simulate the flow field using FLUENT software and to study the shear stress on the surface of interstitial cells (mast cells caused by interstitial fluid flow. The numerical simulation results show the following: (i the parallel nature of capillaries will lead to directional interstitial fluid flow, which may explain the long interstitial tissue channels or meridians observed in some experiments; (ii when the distribution of capillaries is staggered, increases in the velocity alternate, and the velocity tends to be uniform, which is beneficial for substance exchange; (iii interstitial fluid flow induces a shear stress, with magnitude of several Pa, on interstitial cell membranes, which will activate cells and lead to a biological response; (iv capillary and interstitial parameters, such as capillary density, blood pressure, capillary permeability, interstitial pressure, and interstitial porosity, affect the shear stress on cell surfaces. The numerical simulation results suggest that in vivo interstitial fluid flow constitutes the mechanical environment of cells and plays a key role in guiding cell activities, which may explain the meridian phenomena and the acupuncture effects observed in experiments.

  13. Intelligent control of HVAC systems. Part II: perceptron performance analysis

    Ioan URSU

    2013-09-01

    Full Text Available This is the second part of a paper on intelligent type control of Heating, Ventilating, and Air-Conditioning (HVAC systems. The whole study proposes a unified approach in the design of intelligent control for such systems, to ensure high energy efficiency and air quality improving. In the first part of the study it is considered as benchmark system a single thermal space HVAC system, for which it is assigned a mathematical model of the controlled system and a mathematical model(algorithm of intelligent control synthesis. The conception of the intelligent control is of switching type, between a simple neural network, a perceptron, which aims to decrease (optimize a cost index,and a fuzzy logic component, having supervisory antisaturating role for neuro-control. Based on numerical simulations, this Part II focuses on the analysis of system operation in the presence only ofthe neural control component. Working of the entire neuro-fuzzy system will be reported in a third part of the study.

  14. Surveillance systems (PWR) - loose parts monitoring - vibration monitoring - leakage detection

    Schuette, A.; Blaesig, H.

    1982-01-01

    The contribution is engaged in the task and the results of the loose parts monitoring and the vibration monitoring following from the practice at the PWR of Biblis. First a description of both systems - location and type of the sensors used, the treatment of the measurements and the indications - is given. The results of the analysis of some events picked up by the surveillance systems are presented showing applicabilty and benefit of such systems. (orig.)

  15. ALPS, Advanced Loose Parts System for Paks NPP

    Por, G.; Szappanos, G.

    2001-01-01

    Advanced Loose Parts System has two unique features to improve the missed alarm and false alarm rates, which are the major drawbacks of all existing loose parts system. Event selection is based on sequential probability ratio test of whitened signal by auto-regressive modelling, and the classification (as well as localisation) of the events is based on a selflearning artificial intelligence method. Examples of rather good sensitivity of events detection are presented in case of very weak signals, for bursts half-buried in background. Burst found in recorded signals were partly identified having origin in motor operated valve (MOV) vibration. The new feature of the system, namely, automatic recording during start up of main coolant pumps had been successfully tested in this year.(author)

  16. Stratum Corneum Hydration and Skin Surface pH Variation Indicate that Organ Blood Flow Is Regulated by Meridian Activity at Certain Hours

    Li-Fan Chuang

    2014-11-01

    Full Text Available Day and night are regular occurrences in nature, and the organs and tissues in living bodies follow this cycle. The sympathetic nervous system (SNS at various time points regulates organ excitation to maintain healthy functions in the living body. The energy required from basal metabolism can be used to explain living organisms according to the traditional Chinese medicine (TCM concept of relationships between meridian directions and organs at various times (organs “at rest” and organs “in operation”. By monitoring skin reactions after applying a cream, we speculated regular blood flow changes, and established an animated hourglass-shaped trajectory diagram to visualize these changes. A combination of TCM and physiological perspectives were considered to explain how the cardiovascular system produces energy. These two perspectives were applied to interpret the correlation between the SNS and organ metabolism.

  17. [Comprehension and explanation of meridians and collaterals theory in the background of the spread of western medicine into the East in the Ming and Qing Dynasties].

    Li, Su-Yun

    2010-06-01

    In the background of the spread of western medicine into the East in the Ming and Qing Dynasties, Chinese doctors who had accepted western medicine referred to western medical knowledge and began to use the methods of anatomical observation and demonstrating to explain the objective structure of meridians and collaterals. They tried to adopt the artery and vessel explaining the shape of meridian and the blood circle and pulmonary respiration explaining the circulation of Ying-Wei. When the anatomy structures could not perfectly equal to meridians and collaterals, some doctors put forward the gasification feature of meridian to explain the reason. These results suggest that there are difference between meridians and collaterals and pure anatomy concepts, which serves as significant reference and edification for later generations.

  18. Intermodal transport as an integral part of logistics system

    Agnieszka Bitkowska

    2016-06-01

    Full Text Available The experience of companies that are successful in the carriage of goods prove that intermodal transport is now a major factor in determining the success of logistics system. A modern approach to the transport is based on intermodal transport. The article is based on the method of external observation. It presents the essence of intermodal transport and its benefits. It specifies transportation as an integral part of logistics system.

  19. Loose parts monitoring in light water reactor cooling systems

    Santos, A.; Alma, B.J.

    1982-01-01

    The work related to loose monitoring system for light water reactor, developed at GRS - Munique, are described. The basic problems due to the exact localization and detection of the loose part as well the research activities and development necessary aiming to obtain the best techniques in this field. (E.G.) [pt

  20. An Evaluation of the Fitness, Academic, and Self-Esteem Training Program at Meridian School 1984-1985.

    Christie, Samuel G.; Saccone, Peter P.

    This paper reports the results of a pilot program, "Fitness, Academics, and Self-Esteem Training" (FAST), conducted during the 1984/85 school year at Meridian School to test the hypotheses that a program of aerobic exercise with the focus on running, conducted by the classroom teacher, would result in a higher rate of academic achievement, better…

  1. Autonomous Sensory Meridian Response (ASMR: a flow-like mental state

    Emma L. Barratt

    2015-03-01

    Full Text Available Autonomous Sensory Meridian Response (ASMR is a previously unstudied sensory phenomenon, in which individuals experience a tingling, static-like sensation across the scalp, back of the neck and at times further areas in response to specific triggering audio and visual stimuli. This sensation is widely reported to be accompanied by feelings of relaxation and well-being. The current study identifies several common triggers used to achieve ASMR, including whispering, personal attention, crisp sounds and slow movements. Data obtained also illustrates temporary improvements in symptoms of depression and chronic pain in those who engage in ASMR. A high prevalence of synaesthesia (5.9% within the sample suggests a possible link between ASMR and synaesthesia, similar to that of misophonia. Links between number of effective triggers and heightened flow state suggest that flow may be necessary to achieve sensations associated with ASMR.

  2. Sensory determinants of the autonomous sensory meridian response (ASMR): understanding the triggers.

    Barratt, Emma L; Spence, Charles; Davis, Nick J

    2017-01-01

    The autonomous sensory meridian response (ASMR) is an atypical sensory phenomenon involving electrostatic-like tingling sensations in response to certain sensory, primarily audio-visual, stimuli. The current study used an online questionnaire, completed by 130 people who self-reported experiencing ASMR. We aimed to extend preliminary investigations into the experience, and establish key multisensory factors contributing to the successful induction of ASMR through online media. Aspects such as timing and trigger load, atmosphere, and characteristics of ASMR content, ideal spatial distance from various types of stimuli, visual characteristics, context and use of ASMR triggers, and audio preferences are explored. Lower-pitched, complex sounds were found to be especially effective triggers, as were slow-paced, detail-focused videos. Conversely, background music inhibited the sensation for many respondents. These results will help in designing media for ASMR induction.

  3. Sensory determinants of the autonomous sensory meridian response (ASMR: understanding the triggers

    Emma L. Barratt

    2017-10-01

    Full Text Available The autonomous sensory meridian response (ASMR is an atypical sensory phenomenon involving electrostatic-like tingling sensations in response to certain sensory, primarily audio-visual, stimuli. The current study used an online questionnaire, completed by 130 people who self-reported experiencing ASMR. We aimed to extend preliminary investigations into the experience, and establish key multisensory factors contributing to the successful induction of ASMR through online media. Aspects such as timing and trigger load, atmosphere, and characteristics of ASMR content, ideal spatial distance from various types of stimuli, visual characteristics, context and use of ASMR triggers, and audio preferences are explored. Lower-pitched, complex sounds were found to be especially effective triggers, as were slow-paced, detail-focused videos. Conversely, background music inhibited the sensation for many respondents. These results will help in designing media for ASMR induction.

  4. Numerical simulation of the subsolar magnetopause current layer in the sun-earth meridian plane

    Okuda, H.

    1993-01-01

    The formation and stability of the magnetopause current layer near the subsolar point in the sun-earth meridian plane are examined using a 2D electromagnetic particle simulation. For the case of zero IMF, the simulation results show that the current layer remains stable and is essentially the same as in the 1D simulation. The width of the current layer is given by the electron-ion hybrid gyroradius which is much smaller than the ion gyroradius. The current layer is found to remain stable for the northward IMF as well. As in the 1D simulation, the jump of the magnetic field at the current layer for the northward IMF remains small. For the southward IMF, collisionless magnetic reconnection is found to develop, leading to the formation of magnetic islands and density peaking within the current layer.

  5. Autonomous Sensory Meridian Response (ASMR): a flow-like mental state.

    Barratt, Emma L; Davis, Nick J

    2015-01-01

    Autonomous Sensory Meridian Response (ASMR) is a previously unstudied sensory phenomenon, in which individuals experience a tingling, static-like sensation across the scalp, back of the neck and at times further areas in response to specific triggering audio and visual stimuli. This sensation is widely reported to be accompanied by feelings of relaxation and well-being. The current study identifies several common triggers used to achieve ASMR, including whispering, personal attention, crisp sounds and slow movements. Data obtained also illustrates temporary improvements in symptoms of depression and chronic pain in those who engage in ASMR. A high prevalence of synaesthesia (5.9%) within the sample suggests a possible link between ASMR and synaesthesia, similar to that of misophonia. Links between number of effective triggers and heightened flow state suggest that flow may be necessary to achieve sensations associated with ASMR.

  6. Quantum systems related to root systems and radial parts of Laplace operators

    Olshanetsky, M. A.; Perelomov, A. M.

    2002-01-01

    The relation between quantum systems associated to root systems and radial parts of Laplace operators on symmetric spaces is established. From this it follows the complete integrability of some quantum systems.

  7. Trace elements in bottom sediments of the Barents Sea on the standard section "Kola Meridian"

    Lapteva A. M.

    2017-03-01

    Full Text Available The levels of trace metals (Cu, Zn, Ni, Cr, Mn, Co, Pb, Cd, Hg and arsenic (As in samples of bottom sediments from the Barents Sea on eight stations of the standard section "Kola Meridian" have been investigated. Trace elements have been determined on atomic absorption spectrophotometer AA-6800 with mercury-hydride attachment HVG-1 of the company Shimadzu (Japan by the methods of flaming (acetylene – air and electrothermal atomization. Common and very toxic trace elements include Pb, Cd, As, and Hg. It is believed that 90 % of lead, 70–80 % of cadmium, and arsenic, over 30 % of mercury in the atmosphere are of anthropogenic origin, and emissions of these elements in the atmosphere are almost completely manufactured in the Northern Hemisphere. The main sources of income in the Barents Sea are waters of the North Atlantic current and the large-scale atmospheric transport from industrialized Central Europe. As a rule the spatial distribution of trace elements is in good agreement with the granulometric composition of bottom sediments and the content of organic carbon. The contents of most of the listed trace elements in samples of bottom sediments on the standard section "Kola Meridian" in the Norwegian classification are consistent with background levels with the exception of Ni, Cr, and As. Their content in bottom sediments at some stations has met the criteria for "slight" and "moderate" pollution. The obtained results confirm the insignificant levels of contamination of bottom sediments of some trace elements. On the status of stocks of commercial species of aquatic biological resources, the observed levels of contamination of bottom sediments in the investigated areas of the Barents Sea will have no significant effect

  8. Systems reliability Benchmark exercise part 1-Description and results

    Amendola, A.

    1986-01-01

    The report describes aims, rules and results of the Systems Reliability Benchmark Exercise, which has been performed in order to assess methods and procedures for reliability analysis of complex systems and involved a large number of European organizations active in NPP safety evaluation. The exercise included both qualitative and quantitative methods and was structured in such a way that separation of the effects of uncertainties in modelling and in data on the overall spread was made possible. Part I describes the way in which RBE has been performed, its main results and conclusions

  9. KNOWLEDGE-BASED ROBOT VISION SYSTEM FOR AUTOMATED PART HANDLING

    J. Wang

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper discusses an algorithm incorporating a knowledge-based vision system into an industrial robot system for handling parts intelligently. A continuous fuzzy controller was employed to extract boundary information in a computationally efficient way. The developed algorithm for on-line part recognition using fuzzy logic is shown to be an effective solution to extract the geometric features of objects. The proposed edge vector representation method provides enough geometric information and facilitates the object geometric reconstruction for gripping planning. Furthermore, a part-handling model was created by extracting the grasp features from the geometric features.

    AFRIKAANSE OPSOMMING: Hierdie artikel beskryf ‘n kennis-gebaseerde visiesisteemalgoritme wat in ’n industriёle robotsisteem ingesluit word om sodoende intelligente komponenthantering te bewerkstellig. ’n Kontinue wasige beheerder is gebruik om allerlei objekinligting deur middel van ’n effektiewe berekeningsmetode te bepaal. Die ontwikkelde algoritme vir aan-lyn komponentherkenning maak gebruik van wasige logika en word bewys as ’n effektiewe metode om geometriese inligting van objekte te bepaal. Die voorgestelde grensvektormetode verskaf voldoende inligting en maak geometriese rekonstruksie van die objek moontlik om greepbeplanning te kan doen. Voorts is ’n komponenthanteringsmodel ontwikkel deur die grypkenmerke af te lei uit die geometriese eienskappe.

  10. Delivery Systems for Biopharmaceuticals. Part I: Nanoparticles and Microparticles.

    Silva, Ana C; Lopes, Carla M; Lobo, José M S; Amaral, Maria H

    2015-01-01

    Pharmaceutical biotechnology has been showing therapeutic success never achieved with conventional drug molecules. Therefore, biopharmaceutical products are currently well-established in clinic and the development of new ones is expected. These products comprise mainly therapeutic proteins, although nucleic acids and cells are also included. However, according to their sensitive molecular structures, the efficient delivery of biopharmaceuticals is challenging. Several delivery systems (e.g. microparticles and nanoparticles) composed of different materials (e.g. polymers and lipids) have been explored and demonstrated excellent outcomes, such as: high cellular transfection efficiency for nucleic acids, cell targeting, increased proteins and peptides bioavailability, improved immune response in vaccination, and viability maintenance of microencapsulated cells. Nonetheless, important issues need to be addressed before they reach clinics. For example, more in vivo studies in animals, accessing the toxicity potential and predicting in vivo failure of these delivery systems are required. This is the Part I of two review articles, which presents the state of the art of delivery systems for biopharmaceuticals. Part I deals with microparticles and polymeric and lipid nanoparticles.

  11. Waste management - an integral part of environmental management systems

    Hamm, Ulrich

    1998-12-01

    To consider waste as a resource instead of an annoyance with which the management has to cope with, has become an unavoidable task for modern managers. The task the management has to take to secure competitiveness in an environment of rising complexity of production processes and further increasing legal requirements, is to manage waste as much as other recourses are managed. Waste has to be considered an aspect of planning and decision process just as business plans or logistics are. Main themes discussed in this publication comprise waste management, implementation of waste management as an integral part of environmental management systems, and management approach to waste - the results. 4 figs.

  12. Advanced software tools for digital loose part monitoring systems

    Ding, Y.

    1996-01-01

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs

  13. Advanced software tools for digital loose part monitoring systems

    Ding, Y [Institute for Safety Technology (ISTec) GmbH, Garching (Germany)

    1997-12-31

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs.

  14. So, What is Actually the Distance from the Equator to the Pole? – Overview of the Meridian Distance Approximations

    Adam Weintrit

    2013-06-01

    Full Text Available In the paper the author presents overview of the meridian distance approximations. He would like to find the answer for the question what is actually the distance from the equator to the pole - the polar distance. In spite of appearances this is not such a simple question. The problem of determining the polar distance is a great opportunity to demonstrate the multitude of possible solutions in common use. At the beginning of the paper the author discusses some approximations and a few exact expressions (infinite sums to calculate perimeter and quadrant of an ellipse, he presents convenient measurement units of the distance on the surface of the Earth, existing methods for the solution of the great circle and great elliptic sailing, and in the end he analyses and compares geodetic formulas for the meridian arc length.

  15. Modeling multibody systems with uncertainties. Part II: Numerical applications

    Sandu, Corina; Sandu, Adrian; Ahmadian, Mehdi

    2006-01-01

    This study applies generalized polynomial chaos theory to model complex nonlinear multibody dynamic systems operating in the presence of parametric and external uncertainty. Theoretical and computational aspects of this methodology are discussed in the companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part I: Theoretical and Computational Aspects .In this paper we illustrate the methodology on selected test cases. The combined effects of parametric and forcing uncertainties are studied for a quarter car model. The uncertainty distributions in the system response in both time and frequency domains are validated against Monte-Carlo simulations. Results indicate that polynomial chaos is more efficient than Monte Carlo and more accurate than statistical linearization. The results of the direct collocation approach are similar to the ones obtained with the Galerkin approach. A stochastic terrain model is constructed using a truncated Karhunen-Loeve expansion. The application of polynomial chaos to differential-algebraic systems is illustrated using the constrained pendulum problem. Limitations of the polynomial chaos approach are studied on two different test problems, one with multiple attractor points, and the second with a chaotic evolution and a nonlinear attractor set. The overall conclusion is that, despite its limitations, generalized polynomial chaos is a powerful approach for the simulation of multibody dynamic systems with uncertainties

  16. Modeling multibody systems with uncertainties. Part II: Numerical applications

    Sandu, Corina, E-mail: csandu@vt.edu; Sandu, Adrian; Ahmadian, Mehdi [Virginia Polytechnic Institute and State University, Mechanical Engineering Department (United States)

    2006-04-15

    This study applies generalized polynomial chaos theory to model complex nonlinear multibody dynamic systems operating in the presence of parametric and external uncertainty. Theoretical and computational aspects of this methodology are discussed in the companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part I: Theoretical and Computational Aspects .In this paper we illustrate the methodology on selected test cases. The combined effects of parametric and forcing uncertainties are studied for a quarter car model. The uncertainty distributions in the system response in both time and frequency domains are validated against Monte-Carlo simulations. Results indicate that polynomial chaos is more efficient than Monte Carlo and more accurate than statistical linearization. The results of the direct collocation approach are similar to the ones obtained with the Galerkin approach. A stochastic terrain model is constructed using a truncated Karhunen-Loeve expansion. The application of polynomial chaos to differential-algebraic systems is illustrated using the constrained pendulum problem. Limitations of the polynomial chaos approach are studied on two different test problems, one with multiple attractor points, and the second with a chaotic evolution and a nonlinear attractor set. The overall conclusion is that, despite its limitations, generalized polynomial chaos is a powerful approach for the simulation of multibody dynamic systems with uncertainties.

  17. THE STUDY OF DYNAMICS OF CHANGE OF THE ABSCISSA AND ORDINATE OF THE POINT AT THE FAR MERIDIAN SIX DEGREE ZONE IN THE PROJECTION GAUSS-KRUGER

    S. N. Mamedbekov

    2014-01-01

    Full Text Available This paper considers the dynamics of the abscissa and ordinate points in the far zone meridian six degree conformal Gauss-Kruger projection. Performed calculations and graphical representation of the classic formulas of conformal projection. 

  18. Statistical mechanics of homogeneous partly pinned fluid systems.

    Krakoviack, Vincent

    2010-12-01

    The homogeneous partly pinned fluid systems are simple models of a fluid confined in a disordered porous matrix obtained by arresting randomly chosen particles in a one-component bulk fluid or one of the two components of a binary mixture. In this paper, their configurational properties are investigated. It is shown that a peculiar complementarity exists between the mobile and immobile phases, which originates from the fact that the solid is prepared in presence of and in equilibrium with the adsorbed fluid. Simple identities follow, which connect different types of configurational averages, either relative to the fluid-matrix system or to the bulk fluid from which it is prepared. Crucial simplifications result for the computation of important structural quantities, both in computer simulations and in theoretical approaches. Finally, possible applications of the model in the field of dynamics in confinement or in strongly asymmetric mixtures are suggested.

  19. Systems reliability Benchmark exercise part 2-Contributions by the participants

    Amendola, A.

    1986-01-01

    The report describes aims, rules and results of the Systems Reliability Benchmark Exercise, which has been performed in order to assess methods and procedures for reliability analysis of complex systems and involved a large number of European organizations active in NPP safety evaluation. The exercise included both qualitative and quantitative methods and was structured in such a way that separation of the effects of uncertainties in modelling and in data on the overall spread was made possible. This second part of the report is devoted to the documentation of the single contributions by the participant teams (Swedish, GRS, ENEA, NIRA and ENEL, EWE, EdF, Risoe, KWU/IA, ECN, KEMA/KUL, and Framatome contributions)

  20. An examination of the default mode network in individuals with autonomous sensory meridian response (ASMR).

    Smith, Stephen D; Katherine Fredborg, Beverley; Kornelsen, Jennifer

    2017-08-01

    Autonomous Sensory Meridian Response (ASMR) is a perceptual condition in which specific visual and auditory stimuli consistently trigger tingling sensations on the scalp and neck, sometimes spreading to the back and limbs. These triggering stimuli are often social, almost intimate, in nature (e.g., hearing whispering, or watching someone brush her hair), and often elicit a calm and positive emotional state. Surprisingly, despite its prevalence in the general population, no published study has examined the neural underpinnings of ASMR. In the current study, the default mode network (DMN) of 11 individuals with ASMR was contrasted to that of 11 matched controls. The results indicated that the DMN of individuals with ASMR showed significantly less functional connectivity than that of controls. The DMN of individuals with ASMR also demonstrated increased connectivity between regions in the occipital, frontal, and temporal cortices, suggesting that ASMR was associated with a blending of multiple resting-state networks. This atypical functional connectivity likely influences the unique sensory-emotional experiences associated with ASMR.

  1. An Examination of Personality Traits Associated with Autonomous Sensory Meridian Response (ASMR).

    Fredborg, Beverley; Clark, Jim; Smith, Stephen D

    2017-01-01

    Autonomous Sensory Meridian Response (ASMR) is a perceptual condition in which the presentation of particular audio-visual stimuli triggers intense, pleasurable tingling sensations in the head and neck regions, which may spread to the periphery of the body. These triggering stimuli are often socially intimate in nature, and usually involve repetition of movements and/or sounds (e.g., hearing whispering, watching someone brush her hair). Reports of ASMR experiences first appeared in online communities in 2010; since this time, these communities have expanded, with some groups consisting of over 100,000 members. However, despite the apparent prevalence of ASMR, there is currently no research on the personality characteristics that co-occur with this condition. In the current study, 290 individuals with ASMR and 290 matched controls completed the Big Five Personality Inventory (BFI; John et al., 1991); participants with ASMR also completed a questionnaire related to their ASMR phenomenology. Individuals with ASMR demonstrated significantly higher scores on Openness-to-Experience and Neuroticism, and significantly lower levels of Conscientiousness, Extraversion, and Agreeableness compared to matched controls. Further, ratings of subjective ASMR intensity in response to 14 common ASMR stimuli were positively correlated with the Openness-to-Experience and Neuroticism dimensions of the BFI. These results provide preliminary evidence that ASMR is associated with specific personality traits and suggest avenues for further investigation.

  2. Gnomon shadow lengths recorded in the Zhoubi Suanjing: the earliest meridian observations in China?

    Li Yong; Sun Xiaochun

    2009-01-01

    The Zhoubi Suanjing, one of the most important ancient Chinese books on mathematical astronomy, was compiled about 100 BC in the Western Han dynasty (BC 206 - AD 23). We study the gnomon shadow lengths for the 24 solar terms as recorded in the book. Special attention is paid to the so-called law of 'cun qian li', which says the shadow length of a gnomon of 8 chi (about 1.96 m) high will increase (or decrease) 1 cun (1/10 chi) for every 1000 li (roughly 400 km) the gnomon moves northward (or southward). From these data, one can derive the time and location of the observations. The results, however, do not fit historical facts. We suggest that compilers of the Zhoubi Suanjing must have modified the original data according to the law of 'cun qian li'. Through reversing the situation, we recovered the original data, our analysis of which reveals the best possible observation time as 564 BC and the location of observation as 35.78 deg. N latitude. We conclude that this must be the earliest records of solar meridian observations in China. In the meantime, we give the errors of solar altitudes for the 24 solar terms. The average deviation is 5.22 deg., and the mean absolute deviation is 5.52 deg., signifying the accuracy of astronomical calculations from that time.

  3. Observation of intensity of cosmic rays and daily magnetic shifts near meridian 70° in the South America

    Cordaro, E. G.; Gálvez, D.; Laroze, D.

    2016-05-01

    In analysis of experiments carried during September 2008 using secondary cosmic ray detectors located in Chacaltaya (Bolivia) and Niteroi (Brazil), Augusto et al. (2010) showed an increase in the intensity of charged particles which takes place 3 h after sunrise and lasts until 1 h after sunset, furthermore they said that during this period the solar magnetic field lines overtake the Earth‧s surface. These stations are located within the South Atlantic Magnetic Anomaly (SAMA), having both different magnetic rigidities. To reproduce data from the Niteroi and Chacaltaya stations, we record data during the same hours and days using our neutron monitors, muon telescopes and magnetometers within the stations Putre and Los Cerrillos. Our observation stations in Putre and Cerrillos are located at 18°11‧47.8″S, 69°33‧10.9″W at an altitude of 3600 m and 33°29‧42.3″S, 70°42‧59.81″W with 570 m height above sea level, respectively. These stations are located within the South Atlantic Anomaly (SAMA) and are separated approximately 1700 km from each other and 1700 km from the center of the anomaly. Our network is composed furthermore by two auxiliary Cosmic Ray and/or Geomagnetic stations located at different latitudes along 70°W meridian, LARC and O'Higgins stations, which are located within Antarctic territory, covering a broad part of the Southern Hemisphere. Our magnetometer data shows that for each of the components, shifts in the magnetic field intensity for every station (even for those out of the SAMA) lasted between 3 and 4 h after sunrise and 1 and 2 h past sunset, which are the periods when the geomagnetic field is modulated by the transit of the dayside to nightside and nightside to dayside. We believe that, although the magnetometric data indicates the magnetic reconnection for the Chilean region, there is no direct influence from the SAMA other than the lower rigidity cut-off that leads to an increased count rate. Other details about the

  4. Entanglement between noncomplementary parts of many-body systems

    Wichterich, Hannu Christian

    2011-01-01

    This thesis investigates the structure and behaviour of entanglement, the purely quantum mechanical part of correlations, in many-body systems, employing both numerical and analytical techniques at the interface of condensed matter theory and quantum information theory. Entanglement can be seen as a precious resource which, for example, enables the noiseless and instant transmission of quantum information, provided the communicating parties share a sufficient ''amount'' of it. Furthermore, measures of entanglement of a quantum mechanical state are perceived as useful probes of collective properties of many-body systems. For instance, certain measures are capable of detecting and classifying ground-state phases and, particularly, transition (or critical) points separating such phases. Chapters 2 and 3 focus on entanglement in many-body systems and its use as a potential resource for communication protocols. They address the questions of how a substantial amount of entanglement can be established between distant subsystems, and how efficiently this entanglement could be ''harvested'' by way of measurements. The subsequent chapters 4 and 5 are devoted to universality of entanglement between large collections of particles undergoing a quantum phase transition, where, despite the enormous complexity of these systems, collective properties including entanglement no longer depend crucially on the microscopic details. (orig.)

  5. Structural Dynamics in Metal Tris-hydroxyquinolines: Interconversion of Meridianal and Facial Alq3 Isomers

    Ferris, Kim; Sapochak, Linda; Burrows, Paul; Rodovsky, Deanna; Marmolejo, Theresa

    2004-03-01

    While previous work investigating the charge transport properties of Alq3 has indicated that the meridianal (mer) conformation of Alq3 is predominant species, recent work suggesting identification of a facial (fac) form raises again the question of heterogeneity. Electronic structure computations from our group have noted that the energy difference(in parenthesis) between the mer and fac conformations is highly sensitive to basis set description (8.6 kcal/mol//3-21g*/SCF; 6.9 kcal/mol//6-31g*/SCF), electron correlation (6.0 kcal/mol//3-21g*/MP2; 4.7 kcal/mol//6-31g*/MP2), and solvent effects (4.4 kcal/mol/3-21g*/SCF/DMSO). Given these small energy differences, we have conducted a series of Hartree-Fock and first principles electronic structure computations on the interconversion of these structural forms, and will report on the structural and energetic aspects of the transformation. The likely reaction path involves lengthening of the Al-N bond to the point where a pentacoordinate intermediate or transition state would be formed, followed by flipping of the ligand through rotation around the Al-O bond. Following Schmidbauer's earlier work, we note that transformation involving only one ligand will actually lead to a facial isomer. Preliminary characterization of this transition state suggests that the activation energy is approximately 20-25 kcal/mol above the mer conformation. The authors gratefully acknowledge financial support from PNNL Laboratory Directed Research and Development Project and the U.S. Department of Energy, Office of Science, Materials Sciences Division.

  6. Vitiligo: A part of a systemic autoimmune process

    Gopal KVT

    2007-01-01

    Full Text Available Background : Recent clinical and animal experimental studies postulate that the pathogenetic mechanisms of vitiligo could be of systemic origin as vitiligo is associated with ocular and auditory abnormalities as well as other autoimmune disorders.Hence, we studied genetic factors, systemic associations, ocular and auditory abnormalities of vitiligo. Methods: The study group included 150 new cases of various types of vitiligo. One hundred age- and sex-matched nonvitiligo cases were included as controls in the study. A complete family history was taken for all patients. Examination was carried out taking note of the type of vitiligo and approximate percentage of body surface involved. All relevant laboratory investigations, a thorough audiological examination including pure tone audiometry and a complete ophthalmologic examination were carried out in all patients and controls. Statistical analysis was done using the Chi square test. Results: Fifty-four vitiligo patients (36% had a family history of vitiligo. Anemia was present in 30 (20% vitiligo patients but only in five (5% controls, a difference that was statistically significant (c2 = 15.8, P < 0.001. Diabetes mellitus was present in 24 (16% vitiligo patients and only 2 (2% of controls (Chi square, c2 = 12.4, P < 0.001. Hypothyroidism and alopecia areata were present in 18 (12% and 11 (7.4% vitiligo patients respectively and none of the controls. Hypoacusis was seen in 30 (20% vitiligo patients and two (2% controls (c2 = 8.19, P < 0.005. Twenty-four vitiligo patients (16% and five controls (5% had specific ocular abnormalities like uveitis, iris and retinal pigmentary abnormalities (c2 = 7.39, P < 0.001. Conclusion: This study demonstrates statistically significant clinical evidence confirming that vitiligo is a part of systemic autoimmune process.

  7. Blade System Design Study. Part II, final project report (GEC).

    Griffin, Dayton A. (DNV Global Energy Concepts Inc., Seattle, WA)

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its

  8. Benchmarking the performance of fixed-image receptor digital radiography systems. Part 2: system performance metric.

    Lee, Kam L; Bernardo, Michael; Ireland, Timothy A

    2016-06-01

    This is part two of a two-part study in benchmarking system performance of fixed digital radiographic systems. The study compares the system performance of seven fixed digital radiography systems based on quantitative metrics like modulation transfer function (sMTF), normalised noise power spectrum (sNNPS), detective quantum efficiency (sDQE) and entrance surface air kerma (ESAK). It was found that the most efficient image receptors (greatest sDQE) were not necessarily operating at the lowest ESAK. In part one of this study, sMTF is shown to depend on system configuration while sNNPS is shown to be relatively consistent across systems. Systems are ranked on their signal-to-noise ratio efficiency (sDQE) and their ESAK. Systems using the same equipment configuration do not necessarily have the same system performance. This implies radiographic practice at the site will have an impact on the overall system performance. In general, systems are more dose efficient at low dose settings.

  9. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

  10. Configuration Management Program - a part of Integrated Management System

    Mancev, Bogomil; Yordanova, Vanja; Nenkova, Boyka

    2014-01-01

    The recently issued International Atomic Energy Agency (IAEA) publications (GS-R-3, GS-G-3.1 and GS-G-3.5) regarding Management Systems for Facilities and Activities define requirements for creation, introduction, evaluation and continuously improvement of the Management System, which unifies the safety, health, environment, security, quality and economic elements. According to GS-R-3 the Integrated Management System is based on defined processes identified in the enterprises: Managing, Basic and Supporting processes. At implementation of their activities, the organizations often apply other standards in their interrelations with suppliers and the parties concerned - ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007, regarding quality, environment and occupational health and safety management. The integration of the standards of both series ensure the observance of the common management principles that reflect the best practices of management as leadership, participation of the people, process approach, continuously improvement, systematical approach to the management and approach based on facts used at the making decisions. The main objective of the Integrated Management System introduction is to ensure safety considering the influence of all additional impacts taken together. The Integrated Management System is based on the process approach at implementation of the activities in nuclear power plant. The transition to the process oriented approach require long period of time, during which the distribution of the responsibilities is optimized up to the level that will satisfy the requirements, reach and maintain the stipulated objectives. The Configuration Management (CM) is an integrated management process by means of which conformity between design requirements, physical configuration and the plant documentation is ascertained and maintained during the entire life cycle of the facility. Processes within configuration management are not isolated, but are part of

  11. New Delivery Systems for Local Anaesthetics—Part 2

    Edward A. Shipton

    2012-01-01

    Full Text Available Part 2 of this paper deals with the techniques for drug delivery of topical and injectable local anaesthetics. The various routes of local anaesthetic delivery (epidural, peripheral, wound catheters, intra-nasal, intra-vesical, intra-articular, intra-osseous are explored. To enhance transdermal local anaesthetic permeation, additional methods to the use of an eutectic mixture of local anaesthetics and the use of controlled heat can be used. These methods include iontophoresis, electroporation, sonophoresis, and magnetophoresis. The potential clinical uses of topical local anaesthetics are elucidated. Iontophoresis, the active transportation of a drug into the skin using a constant low-voltage direct current is discussed. It is desirable to prolong local anaesthetic blockade by extending its sensory component only. The optimal release and safety of the encapsulated local anaesthetic agents still need to be determined. The use of different delivery systems should provide the clinician with both an extended range and choice in the degree of prolongation of action of each agent.

  12. Radiobiology in clinical radiation therapy part I - Systems and principles

    Hall, Eric J.

    1996-01-01

    Objective: This course is designed for residents in radiation oncology, preparing for their boards. It includes the physics and chemistry of the absorption of radiation, a description of the biological systems used to obtain a quantitative relationship between dose and biological effect, as well as a review of the basic principles in radiation biology that have been established. The biological effects of radiation may result from the direct action, which refers to ionizations in the DNA itself, or the indirect action which is mediated by free radicals. For x or gamma rays, about 70% of the damage is by the indirect action, which can be modified by oxygen and various chemical agents. Radiation-induced DNA damage may lead to carcinogenesis and hereditary effects, which are important in personnel protection, or to cell lethality which is the basis of radiotherapy. Chromosome aberrations and cell lethality appear to result from the interaction of two lesions (probably double strand breaks) which leads to the linear-quadratic relationship. This refers to mitotic death, which is the most common form of radiation induced death. Programmed cell death orApoptosis also occurs which appears to be important in more radiosensitive tumors, and relatively unimportant in radioresistant tumors. A number of quantitative biological test systems have been developed to quantify the effects of radiation as a function of dose. Cells may be cultured in vitro, of normal and neoplastic origin, and survival curves produced with reproductive integrity plotted as a function of dose. Normal tissue systems where reproductive integrity can be scored as an endpoint include skin, gut, colony forming units in the bone marrow, as well as breast, thyroid and testis. The response of some normal tissues depends, not only on the fraction of cells killed, but on the tissue architecture in terms of functional subunits, this will be discussed in Part III. A range of transplantable tumors have been studied

  13. Radiobiology in clinical radiation therapy - Part I: Systems and principles

    Hall, Eric J.

    1997-01-01

    Objective: This course is designed for residents in radiation oncology, preparing for their boards. It begins with the principles of cell and molecular biology as they relate to carcinogenesis, and concentrates on the principles of radiation biology that have been established by the use of quantitative biological systems. Malignant cells are characterized by their capacity for unlimited proliferation; this change from normal cells is the consequence of genetic changes that may include the activation of dominantly acting oncogenes and/or the deletion of recessively acting tumor suppressor genes. The biological effects of radiation may result from the direct action, which refers to ionizations in the DNA itself, or the indirect action which is mediated by free radicals. Radiation-induced DNA damage may lead to carcinogenesis and hereditary effects, which are important in personnel protection, or to cell lethality which is the basis of radiotherapy. Chromosome aberrations and cell lethality appear to result from the interaction of two lesions (probably double strand breaks) which leads to the ubiquitous linear-quadratic relationship. This refers to mitotic death, which is the most common form of radiation induced death. Programmed cell death or Apoptosis also occurs which is important in more radiosensitive tumors, and relatively unimportant in radioresistant tumors. A number of quantitative biological test systems have been developed to quantify the effects of radiation as a function of dose. Cells may be cultured in vitro, of normal and neoplastic origin, and survival curves produced with reproductive integrity plotted as a function of dose. Normal tissue systems where reproductive integrity can be scored as an endpoint include skin, gut, colony forming units in the bone marrow, as well as breast, thyroid and testis. The response of some normal tissues depends, not only on the fraction of cells killed, but on the tissue architecture in terms of functional subunits

  14. Randomised clinical trial: an assessment of acupuncture on specific meridian or specific acupoint vs. sham acupuncture for treating functional dyspepsia.

    Ma, T T; Yu, S Y; Li, Y; Liang, F R; Tian, X P; Zheng, H; Yan, J; Sun, G J; Chang, X R; Zhao, L; Wu, X; Zeng, F

    2012-03-01

    Functional dyspepsia (FD) is a common disease without an established optimal treatment. To determine (i) the effect of acupuncture in relieving FD symptoms and improving life quality; (ii) the effect difference between acupoint and non-acupoint; and (iii) the effect difference among different acupoints. A total of 712 eligible patients were included and randomly assigned to six groups (Group A: specific acupoints of the stomach meridian; Group B: non-specific acupoints of the stomach meridian; Group C: specific acupoints of alarm and transport points; Group D: specific acupoints of the gallbladder meridian; Group E: sham acupuncture of non-acupoints; and Group F: itopride). A treatment period of 4 weeks (continuous five sessions per week), and a follow-up period of 12 weeks were arranged. The outcomes were the (i) patients' response, (ii) symptoms improvement measured using the Symptom Index of Dyspepsia and (iii) quality-of-life improvement based on Nepean Dyspepsia Index. All groups had an improvement in dyspepsia symptoms and the QoL at the end of treatment, and the improvement was sustained for 4 weeks and 12 weeks. The overall response rate was significantly higher in acupuncture group A (70.69%), and lower in sham acupuncture group (34.75%), compared with itopride and other acupuncture groups. Similarly, the difference in symptoms and QoL improvement was significant between group A and the other acupuncture groups. Acupuncture is effective in the treatment of functional dyspepsia, and is superior to non-acupoint puncture. The benefit of acupuncture relies on acupoint specificity. © 2012 Blackwell Publishing Ltd.

  15. On the evaluation of the capacitance of toroidal capacitors with a moon-shape meridian cross section

    Gongora T, A.; Ley-Koo, E.

    1997-01-01

    The toroidal capacitors studied in this paper consist of electrodes with meridian cross sections that are circular arcs meeting at the axis, and separated from each other by two small insulating spheres at their meeting points. The description and analysis of such capacitors is carried out by using bi spherical coordinates. The R-separability of the Laplace equation in these coordinates requires the use of the Green function technique, just like in the related problems of toroidal, spherical-cap-electrode, and bi spherical capacitors (1-3). An overall comparison of the solutions of the four problems is specially instructive. (Author)

  16. Additive Manufacturing of Parts and Tooling in Robotic Systems

    Love, Lonnie J. [ORNL; Hassen, Ahmed A. [ORNL; Chesser, Phillip C. [ORNL; Parsons, Jeremy [Mantaro Networks, Inc.

    2018-04-01

    ORNL worked with Transcend Robotics, LLC to explore additive manufacturing of the two-piece compression body for their ARTI mobile robot platform. Extrusion compression molding was identified as an effective means of manufacturing these parts. ORNL consulted on modifications to the housing design to accommodate the selected manufacturing process. Parts were printed using ORNL's FDM machines for testing and evaluation of the design as a precursor to molding the parts. The assembly and evaluation of the parts proved favorable and minor design changes to improve assembly and performance were identified.The goal is to develop a light weight and rugged two-part robotic enclosure for an unmanned ground vehicle UGV) that will be used in search and rescue applications. The FDM parts fabricated by ORNL allowed Transcend Robotics to assemble a prototype robot and verify that the new parts will meet the performance requirements. ORNL fabricated enclosure parts out of ABS and Nylon 12 materials such that the design could be tested prior to fabricating tooling for compression molding of Nylon 6 with carbon fiber fill. The robot was performance tested and compared with the previous manufacturing techniques and found to have superior performance.

  17. Transactive System: Part II: Analysis of Two Pilot Transactive Systems using Foundational Theory and Metrics

    Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wu, Di [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ren, Huiying [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2018-01-24

    This document is the second of a two-part report. Part 1 reviewed several demonstrations of transactive control and compared them in terms of their payoff functions, control decisions, information privacy, and mathematical solution concepts. It was suggested in Part 1 that these four listed components should be adopted for meaningful comparison and design of future transactive systems. Part 2 proposes qualitative and quantitative metrics that will be needed to compare alternative transactive systems. It then uses the analysis and design principles from Part 1 while conducting more in-depth analysis of two transactive demonstrations: the American Electric Power (AEP) gridSMART Demonstration, which used a double –auction market mechanism, and a consensus method like that used in the Pacific Northwest Smart Grid Demonstration. Ultimately, metrics must be devised and used to meaningfully compare alternative transactive systems. One significant contribution of this report is an observation that the decision function used for thermostat control in the AEP gridSMART Demonstration has superior performance if its decision function is recast to more accurately reflect the power that will be used under for thermostatic control under alternative market outcomes.

  18. Anatomical Features of the Interscapular Area Where Wet Cupping Therapy Is Done and Its Possible Relation to Acupuncture Meridians.

    Ghods, Roshanak; Sayfouri, Nasrin; Ayati, Mohammad Hossein

    2016-12-01

    Although wet cupping has been a treatment for centuries, its mechanism of action is not well understood. Because the anatomical features of the wet-cupping area might play a role in its mechanism, we focus on the features of the interscapular area in which a common type of wet-cupping therapy (WCT), called Hijamat-e-Aam in Iranian medicine, is usually applied and discuss the possible relation of those features to the acupuncture meridians. We gathered and analyzed data from reliable textbooks on modern medicine with a focus on the anatomical features of the interscapular area, topics related to WTC in Iranian medicine, and acupuncture sources obtained by searching PubMed, Google-Scholar, and Science Direct. The interscapular area used for WCT was found to have special features: brown adipose tissue, immediate proximity to sympathetic ganglia, passage of the thoracic duct, two important acupuncture meridians, and proximity to the main vessel divisions carrying blood from the heart and the brain. These features indicate that the interscapular application of WCT not only discharges waste materials through a shifting of blood to the site after application of a traction force but also invigorates the body's metabolism, increases immunity, and regulates blood biochemistry, which are desired therapeutic effects of WCT. Copyright © 2016. Published by Elsevier B.V.

  19. Anatomical Features of the Interscapular Area Where Wet Cupping Therapy Is Done and Its Possible Relation to Acupuncture Meridians

    Roshanak Ghods

    2016-12-01

    Full Text Available Although wet cupping has been a treatment for centuries, its mechanism of action is not well understood. Because the anatomical features of the wet-cupping area might play a role in its mechanism, we focus on the features of the interscapular area in which a common type of wet-cupping therapy (WCT, called Hijamat-e-Aam in Iranian medicine, is usually applied and discuss the possible relation of those features to the acupuncture meridians. We gathered and analyzed data from reliable textbooks on modern medicine with a focus on the anatomical features of the interscapular area, topics related to WTC in Iranian medicine, and acupuncture sources obtained by searching PubMed, Google-Scholar, and Science Direct. The interscapular area used for WCT was found to have special features: brown adipose tissue, immediate proximity to sympathetic ganglia, passage of the thoracic duct, two important acupuncture meridians, and proximity to the main vessel divisions carrying blood from the heart and the brain. These features indicate that the interscapular application of WCT not only discharges waste materials through a shifting of blood to the site after application of a traction force but also invigorates the body’s metabolism, increases immunity, and regulates blood biochemistry, which are desired therapeutic effects of WCT.

  20. Refractive variation under accommodative demand: curvital and scaled torsional variances and covariance across the meridians of the eye.

    van Gool, R D; Harris, W F

    1997-06-01

    Autorefractor measurements were taken on the right eye of 10 students with an external target at vergences -1.00 and -3.00 D. The refractive errors in the form of sphere, cylinder, and axis were converted to vectors h and variance-covariance matrices calculated for different reference meridians. Scatter plots are drawn in symmetric dioptric power space. The profiles of curvital and scaled torsional variances, the scaled torsional fraction, and the scaled torsional-curvital correlation are shown using a polar representation. This form of representation provides a meridional pattern of variation under accommodative demand. The profile for scaled torsional variance is characteristically in the form of a pair of rabbit ears. At both target vergences curvital variance is larger than scaled torsional variance in all the meridians of the eye: the relative magnitudes are quantified by the scaled torsional fraction. An increase in accommodative demand generally results in an increase in variance. The rabbit ears usually become larger but less well divided. The correlation between curvital and torsional powers is usually positive in the first quadrant and negative in the second quadrant. Typical, atypical, and mean typical responses are discussed.

  1. Analysis of Double Meridian Distance for a Closed Traverse Area towards Developing a Contour Map and Land Title

    T. U. Ganiron Jr

    2014-07-01

    Full Text Available This research aimed to analyze double meridian distance for a closed traverse area in developing a land title for a propose gymnasium in Qassim University. Theodolite, leveling rod and steel tape plays an important role in measuring elevations, bearings and distances of the boundaries of a lot. Contour map is necessary to determine the traces of level surfaces of successive elevation. This will enable to identify the type of contour map and type of contour lines necessary for this project. Corel draw software is used to draw contour map and guide to interpret the significance of the variables. It is essential to check the error of closure for interior angles and for both latitude and departure before applying the Double Meridian Distance (DMD method to obtain the total area of the lot. Technical descriptions of the land such as distance, bearing, boundaries and area are necessary to visualize the shape & exact location of the land. Developing a land title will be obtained using the technical descriptions of the lot in preparation for the type of gymnasium necessary for Qassim University.

  2. Bulk-assay calorimeter: Part 1. System design and operation. Part 2. Calibration and testing

    Perry, R.B.; Roche, C.T.; Harkness, A.L.; Winslow, G.H.; Youngdahl, G.A.; Lewis, R.N.; Jung, E.A.

    1982-01-01

    The Bulk-Assay Calorimeter is designed to measure the thermal power emitted by plutonium-containing samples. The sample power range of the instrument is 1.4 to 22.4 W. The instrument package consists of the calorimeter measurement chamber, the control circuit power bin, and the data acquisition system. Two sample preheating chambers and five calorimeter canisters for containing the samples are included. A set of 32 test points which monitor voltages at points within the calorimeter and its control circuitry are accessed by the data acquisition system. The use of the test points is described. System start-up and checkout are described. Sample assay and preheater operation procedures are given. The data acquisition system and data analysis software are described. The calorimeter was calibrated at 23 points with heat sources from 1.4 to 22.4 watts. The combined measurement error varied with sample power from 1.4% to 0.1% over the range of calibration measurements. Circuit diagrams for the calorimeter and schematics for the data acquisition system are included

  3. Aircraft noise prediction program theoretical manual: Rotorcraft System Noise Prediction System (ROTONET), part 4

    Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.

    1995-01-01

    This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.

  4. DYSLIPIDEMIAS AND THEIR ASSOCIATION WITH CHRONIC NON-INFECTIOUS DISEASES (MERIDIAN-RO STUDY

    E. V. Filippov

    2016-01-01

    .1 %. Adverse outcomes of NCD associated with elevated levels of apoB in the MERIDIAN-RO study, which should be considered when assessing the atherogenic dyslipidemia.

  5. [Comparison of the effects of the intervention with electric thermal bian stone and air suction cup on blood perfusion at meridian points].

    Zhao, Pengna; Wang, Yanping; Gu, Feifei; Li, Chaozheng; Wei, Yulong; Wang, Guangjun; Zhang, Weibo

    2018-02-12

    To observe the impacts of the intervention with electric thermal bian stone and air suction cup on blood perfusion (BP) at meridian points and explore the approach of accurate measurement and regulation of meridian qi and blood balance in "precise acupuncture". The laser Doppler line scanner (LDLS) was used to measure BP at bilateral yua n-primary points at the pericardium meridian, the triple energizer meridian, the gallbladder meridian and the liver meridian (small cycle of jueyin to shaoyang meridians) at 31 healthy receptors. The bias ratio of blood perfusion (BPBR) deviated to the reference value was calculated. The electric thermal bian stone and air suction cup were used in the intervention at the he -sea points of the affected meridians in which BPBR was relatively higher at the yuan -primary points. The electric thermal bian stone therapy was used when BPBR was less than -30% and the air suction cupping therapy was used when BPBR was higher than 30%. BP was measured twice before intervention and it was measured separately at the moment after intervention and in 20 min after intervention. The means of BP before and after intervention and the change ratio of blood perfusion (BPCR) before intervention, at the moment after intervention and 20 min after intervention were calculated. 1. After the intervention of electric thermal bian stone, BP mean was increased from (103.51±41.21) PU to (121.97±56.22) PU ( P 0.05), but the change ratio was highly remained. 2. After intervention with air suction cup, BP mean was reduced from (194.83±81.14) PU to (173.88±88.26) PU. Before intervention, at the moment after intervention and 20 min after intervention, separately, BPCR were (7.62±30.49)%, (-12.12±18.20)% and (-14.35±21.25)%. BPCR at the moment after intervention and in 20 min after intervention were significantly different from that before intervention (both P cup is opposite.

  6. Spare parts inventory control under system availability constraints

    Houtum, van G.J.J.A.N.; Kranenburg, A.A.

    2015-01-01

    This book focuses on the tactical planning level for spare parts management. It describes a series of multi-item inventory models and presents exact and heuristic optimization methods, including greedy heuristics that work well for real, life-sized problems. The intended audience consists of

  7. Information Security Management - Part Of The Integrated Management System

    Manea, Constantin Adrian

    2015-07-01

    The international management standards allow their integrated approach, thereby combining aspects of particular importance to the activity of any organization, from the quality management systems or the environmental management of the information security systems or the business continuity management systems. Although there is no national or international regulation, nor a defined standard for the Integrated Management System, the need to implement an integrated system occurs within the organization, which feels the opportunity to integrate the management components into a cohesive system, in agreement with the purpose and mission publicly stated. The issues relating to information security in the organization, from the perspective of the management system, raise serious questions to any organization in the current context of electronic information, reason for which we consider not only appropriate but necessary to promote and implement an Integrated Management System Quality - Environment - Health and Operational Security - Information Security

  8. An Overview of the Asynchronous Digital SystemsPart 3

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  9. An Overview of the Asynchronous Digital SystemsPart 2

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  10. Design of inventory pools in spare part support operation systems

    Mo, Daniel Y.; Tseng, Mitchell M.; Cheung, Raymond K.

    2014-06-01

    The objective of a spare part support operation is to fulfill the part request order with different service contracts in the agreed response time. With this objective to achieve different service targets for multiple service contracts and the considerations of inventory investment, it is not only important to determine the inventory policy but also to design the structure of inventory pools and the order fulfilment strategies. In this research, we focused on two types of inventory pools: multiple inventory pool (MIP) and consolidated inventory pool (CIP). The idea of MIP is to maintain separated inventory pools based on the types of service contract, while CIP solely maintains a single inventory pool regardless of service contract. Our research aims to design the inventory pool analytically and propose reserve strategies to manage the order fulfilment risks in CIP. Mathematical models and simulation experiments would be applied for analysis and evaluation.

  11. PWL approximation of nonlinear dynamical systems, part I: structural stability

    Storace, M; De Feo, O

    2005-01-01

    This paper and its companion address the problem of the approximation/identification of nonlinear dynamical systems depending on parameters, with a view to their circuit implementation. The proposed method is based on a piecewise-linear approximation technique. In particular, this paper describes the approximation method and applies it to some particularly significant dynamical systems (topological normal forms). The structural stability of the PWL approximations of such systems is investigated through a bifurcation analysis (via continuation methods)

  12. Reconfigurable materials handling system incorporating part tracking, routing and scheduling

    Naidu, P

    2006-07-01

    Full Text Available . Transmission range of 10m-30m indoors is common. RFID is a commonly available system which uses either low-cost passive Radio tags, or higher cost active tags, that an RF receiver can then read. An RFID system comprises of a reader, its associated antenna...]. 3. Proposed Tracking System The proposed tracking system consists of a two phases. In the first phase a passive radio frequency (RF) tag is read by a RF reader. In the second phase the information obtained from the reader is wirelessly...

  13. Critical Uses of College Resources. Part I: Personnel Utilization System.

    Vlahos, Mantha

    A Personnel Utilization System has been designed at Broward Community College, which combines payroll, personnel, course, and function information in order to determine the actual duties performed by personnel for the amount of remuneration received. Objectives of the system are (1) to define the tasks being performed by faculty, staff, and…

  14. Modeling ecological and economic systems with STELLA : Part III

    Costanza, Robert; Voinov, Alexey

    2001-01-01

    This special issue contains a group of eight modeling studies covering a range of ecological and economic systems and problems. The models were all developed using Stella®, an icon-based software package specifically designed for dynamic systems modeling. Models included in the special issue were

  15. 105 Developing a Cadastral Information System for Part of Fadaman ...

    Arc. Usman A. Jalam

    Cadastral Information System (CIS) has been made more effective for the monitoring, evaluation and management of ... from air and water pollution, environmental degradation .... method to prepare the land use land cover map. ... research was ended by developing a decision support system created to supply information ...

  16. A/C Interface: Expert Systems: Part II.

    Dessy, Raymond E., Ed.

    1984-01-01

    Discusses working implementations of artificial intelligence systems for chemical laboratory applications. They include expert systems for liquid chromatography, spectral analysis, instrument control of a totally computerized triple-quadrupole mass spectrometer, and the determination of the mineral constituents of a rock sample given the powder…

  17. systemic objective test in medical biochemistry part 1- metabolism

    IICBA01

    and help to develop the imagination and the research. ... introduce STFQs, SMCQs, SSQs, SSQs, ASQs, and SCQs as examples of the systemic ... Asking questions lies on the basic foundation of communication, especially the lecturer- .... Systemic True/False Questions are well suited for testing students' comprehension,.

  18. An Antagonistic Dialogue about Chaordic Systems Thinking: Part I

    Wafler, Toni

    2004-01-01

    This paper explores the added value of chaordic systems Thinking for organizational renewal, which is defined as transformation instead of reformation. The exploration is presented in the form of an antagonistic dialogue between two "voices," which develop commentaries from distinct theoretical inspirations, namely chaordic systems thinking (CST)…

  19. Ammonia-water system : Part I. Thermodynamic properties

    Goomer, N.C.; Dave, S.M.; Sadhukhan, H.K.

    1980-01-01

    The various thermodynamic properties which have direct bearing on design calculations and separation factor calculations for gaseous ammonia water system have been calculated and compiled in tabular form for easy reference. (auth.)

  20. PWL approximation of nonlinear dynamical systems, part II: identification issues

    De Feo, O; Storace, M

    2005-01-01

    This paper and its companion address the problem of the approximation/identification of nonlinear dynamical systems depending on parameters, with a view to their circuit implementation. The proposed method is based on a piecewise-linear approximation technique. In particular, this paper describes a black-box identification method based on state space reconstruction and PWL approximation, and applies it to some particularly significant dynamical systems (two topological normal forms and the Colpitts oscillator)

  1. Space construction system analysis. Part 2: Cost and programmatics

    Vonflue, F. W.; Cooper, W.

    1980-01-01

    Cost and programmatic elements of the space construction systems analysis study are discussed. The programmatic aspects of the ETVP program define a comprehensive plan for the development of a space platform, the construction system, and the space shuttle operations/logistics requirements. The cost analysis identified significant items of cost on ETVP development, ground, and flight segments, and detailed the items of space construction equipment and operations.

  2. Parts of the Whole: Observing the State of the System

    Dorothy Wallace

    2010-01-01

    Full Text Available This column draws on the approach of statistician J. Edwards Deming to analyze sources and consequences of variation in an education system. Educational systems are not immune from the effects of poor statistical control, which makes it difficult for teachers to teach effectively and for managers such as principals to improve on school performance. It is also argued that the need for statistical control in these areas is in tension, if not outright conflict, with our goals for educating students.

  3. Machine Vision System for Color Sorting Wood Edge-Glued Panel Parts

    Qiang Lu; S. Srikanteswara; W. King; T. Drayer; Richard Conners; D. Earl Kline; Philip A. Araman

    1997-01-01

    This paper describes an automatic color sorting system for hardwood edge-glued panel parts. The color sorting system simultaneously examines both faces of a panel part and then determines which face has the "better" color given specified color uniformity and priority defined by management. The real-time color sorting system software and hardware are briefly...

  4. Learning to leverage existing information systems: Part 1. Principles.

    Neil, Nancy; Nerenz, David

    2003-10-01

    The success of performance improvement efforts depends on effective measurement and feedback regarding clinical processes and outcomes. Yet most health care organizations have fragmented rather than integrated data systems. Methods and practical guidance are provided for leveraging available information sources to obtain and create valid performance improvement-related information for use by clinicians and administrators. At Virginia Mason Health System (VMHS; Seattle), a vertically integrated hospital and multispecialty group practice, patient records are paper based and are supplemented with electronic reporting for laboratory and radiology services. Despite growth in the resources and interest devoted to organization-wide performance measurement, quality improvement, and evidence-based tools, VMHS's information systems consist of largely stand-alone, legacy systems organized around the ability to retrieve information on patients, one at a time. By 2002, without any investment in technology, VMHS had developed standardized, clinic-wide key indicators of performance updated and reported regularly at the patient, provider, site, and organizational levels. On the basis of VHMS's experience, principles can be suggested to guide other organizations to explore solutions using their own information systems: for example, start simply, but start; identify information needs; tap multiple data streams; and improve incrementally.

  5. Iron ore sintering. Part 3: Automatic and control systems

    Alejandro Cores

    2015-01-01

    Full Text Available El proceso de sinterización implica un gran número de parámetros, más de quinientos, cada uno de los cuales ejerce una mayor o menor influencia y necesita ser controlado, dentro de los límites posibles, con el fin de optimizar la productividad, la estabilidad del proceso, y la composición y la calidad de la sinterizado producido. Para cumplir con la legislación ambiental, un sistema de control de la contaminación debe monitorizar la composición de las partículas y los gases generados en la planta de sinterización y emitidos a la atmósfera. Los sistemas de automatización y control son herramientas vitales para ayudar a los operadores de la planta en el seguimiento de cada etapa del proceso de producción de sinterizado.

  6. 创伤视角下的《梅丽迪安》%A Study of Meridian from Trauma Theory

    董薇

    2014-01-01

    艾丽丝∙沃克的《梅丽迪安》揭示了在20世纪60年代,种族主义和性别主义带给人们的伤害。从创伤理论视角出发,聚焦小说中的两位女性人物,通过比较分析,探索小说中体现的个人创伤,集体创伤以及创伤的恢复。%Alice Walker’s Meridian reveals the trauma caused by racism and sexism in 1960s.The thesis focus on two female characters to explore the individual,collective and recovery of trauma in the novel.

  7. Monolithic Controlled Delivery Systems: Part I. Basic Characteristics and Mechanisms

    Rumiana Blagoeva

    2006-04-01

    Full Text Available The article considers contemporary systems for controlled delivery of active agents, such as drugs, agricultural chemicals, pollutants and additives in the environment. A useful classification of the available controlled release systems (CRS is proposed according to the type of control (passive, active or self-preprogrammed and according to the main controlling mechanism (diffusion, swelling, dissolution or erosion. Special attention is given to some of the most used CRS - polymer monoliths. The structural and physical-chemical characteristics of CRS as well as the basic approaches to their production are examined. The basic mechanisms of controlled agent release are reviewed in detail and factors influencing the release kinetics are classified according to their importance. The present study can be helpful for understanding and applying the available mathematical models and for developing more comprehensive ones intended for design of new controlled delivery systems.

  8. Ensemble system for Part-of-Speech tagging

    Dell'Orletta, Felice

    2009-01-01

    The paper contains a description of the Felice-POS-Tagger and of its performance in Evalita 2009. Felice-POS-Tagger is an ensemble system that combines six different POS taggers. When evaluated on the official test set, the ensemble system outperforms each of the single tagger components and achieves the highest accuracy score in Evalita 2009 POS Closed Task. It is shown rst that the errors made from the dierent taggers are complementary, and then how to use this complementary behavior to the...

  9. Ultrasound Vector Flow Imaging: Part II: Parallel Systems

    Jensen, Jørgen Arendt; Nikolov, Svetoslav Ivanov; Yu, Alfred C. H.

    2016-01-01

    The paper gives a review of the current state-of-theart in ultrasound parallel acquisition systems for flow imaging using spherical and plane waves emissions. The imaging methods are explained along with the advantages of using these very fast and sensitive velocity estimators. These experimental...... ultrasound imaging for studying brain function in animals. The paper explains the underlying acquisition and estimation methods for fast 2-D and 3-D velocity imaging and gives a number of examples. Future challenges and the potentials of parallel acquisition systems for flow imaging are also discussed....

  10. Risk Informed Design as Part of the Systems Engineering Process

    Deckert, George

    2010-01-01

    This slide presentation reviews the importance of Risk Informed Design (RID) as an important feature of the systems engineering process. RID is based on the principle that risk is a design commodity such as mass, volume, cost or power. It also reviews Probabilistic Risk Assessment (PRA) as it is used in the product life cycle in the development of NASA's Constellation Program.

  11. Connected Lighting System Interoperability Study Part 1: Application Programming Interfaces

    Gaidon, Clement [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poplawski, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-10-31

    First in a series of studies that focuses on interoperability as realized by the use of Application Programming Interfaces (APIs), explores the diversity of such interfaces in several connected lighting systems; characterizes the extent of interoperability that they provide; and illustrates challenges, limitations, and tradeoffs that were encountered during this exploration.

  12. Progress in passive solar energy systems. Volume 8. Part 1

    Hayes, J.; Andrejko, D.A.

    1983-01-01

    This book presents the papers given at a conference sponsored by the US DOE, the Solar Energy Research Institute, SolarVision, Inc., and the Southern California Solar Energy Society. The topics considered at the conference included sizing solar energy systems for agricultural applications, a farm scale ethanol production plant, the EEC wind energy RandD program, the passive solar performance assessment of an earth-sheltered house, the ARCO 1 MW photovoltaic power plant, the performance of a dendritic web photovoltaic module, second generation point focused concentrators, linear fresnel lens concentrating photovoltaic collectors, photovoltaic conversion efficiency, amorphous silicon thin film solar cells, a photovoltaic system for a shopping center, photovoltaic power generation for the utility industry, spectral solar radiation, and the analysis of insolation data.

  13. Chaotic time series. Part II. System Identification and Prediction

    Bjørn Lillekjendlie

    1994-10-01

    Full Text Available This paper is the second in a series of two, and describes the current state of the art in modeling and prediction of chaotic time series. Sample data from deterministic non-linear systems may look stochastic when analysed with linear methods. However, the deterministic structure may be uncovered and non-linear models constructed that allow improved prediction. We give the background for such methods from a geometrical point of view, and briefly describe the following types of methods: global polynomials, local polynomials, multilayer perceptrons and semi-local methods including radial basis functions. Some illustrative examples from known chaotic systems are presented, emphasising the increase in prediction error with time. We compare some of the algorithms with respect to prediction accuracy and storage requirements, and list applications of these methods to real data from widely different areas.

  14. Engineering Design Handbook. Army Weapon Systems Analysis. Part 2

    1979-10-01

    detecting the target with a given number of looks. Schweitzer (Ref. 21) also studied this same problem of minimum-search policy. In Ref.M21, Schweitzer ...Stephen M. Pollack, "A Simple Model of Search for a Moving Target", Operations Research 18., pp. 883-903 (September.October 1970). 21. Paul J. Schweitzer ... Albert Shapero and Charles Bates, Jr., A Method for Performing Human Engineeriýg Analysis of Wenpoa Systems, WADC Technical Report 59-784, Wright

  15. The Systemic Theory of Living Systems and Relevance to CAM: the Theory (Part III

    José A. Olalde Rangel

    2005-01-01

    Full Text Available Western medical science lacks a solid philosophical and theoretical approach to disease cognition and therapeutics. My first two articles provided a framework for a humane medicine based on Modern Biophysics. Its precepts encompass modern therapeutics and CAM. Modern Biophysics and its concepts are presently missing in medicine, whether orthodox or CAM, albeit they probably provide the long sought explanation that bridges the abyss between East and West. Key points that differentiate Systemic from other systems' approaches are ‘Intelligence’, ‘Energy’ and the objective ‘to survive’. The General System Theory (GST took a forward step by proposing a departure from the mechanistic biological concept—of analyzing parts and processes in isolation—and brought us towards an organismic model. GST examines the system's components and results of their interaction. However, GST still does not go far enough. GST assumes ‘Self-Organization’ as a spontaneous phenomenon, ignoring a causative entity or central controller to all systems: Intelligence. It also neglects ‘Survive’ as the directional motivation common to any living system, and scarcely assigns ‘Energy’ its true inherent value. These three parameters, Intelligence, Energy and Survive, are vital variables to be considered, in our human quest, if we are to achieve a unified theory of life.

  16. Cambrian and ordovician systems around the pacific basin (part 3)

    Kobayashi, Teiichi

    1987-10-25

    This report describes the history of the studies made about old rocks and Cambrian and Ordovician Systems in North America. In last century, development of the Pre-Canbrian stratigraphy and mineral resources was started in Canada, while the New York System was instituted in the middle and east areas of North America, and it was later correlated to the European sequence. Walcott who published many reports including the vental anatomy of trilobites made invaluable contribution on the study of Cambrian geology. The Cambro-Ordovician faunas which distributed in the Appalachian mountains and further westerly beyond the lower Mississipy river were related to the European ones. The systems in the Cordilleran geosyncline was also described. Stratigraphy in the western sites is followed on the Alaskan faunas in the north which were allied to the Siberian faunas and later to the Eastern Asiatic ones. Lastly, Circum-Pacific Cambro-Ordovician belt was taken up. The eastern side of the Circum-Pacific Cambrian belt belonged to Olenellian province, and the other side constituted the Redlichia province. (2 figs, 5 tabs, 101 refs)

  17. Mars Hybrid Propulsion System Trajectory Analysis. Part I; Crew Missions

    Chai, Patrick R.; Merrill, Raymond G.; Qu, Min

    2015-01-01

    NASAs Human spaceflight Architecture team is developing a reusable hybrid transportation architecture in which both chemical and electric propulsion systems are used to send crew and cargo to Mars destinations such as Phobos, Deimos, the surface of Mars, and other orbits around Mars. By combining chemical and electrical propulsion into a single space- ship and applying each where it is more effective, the hybrid architecture enables a series of Mars trajectories that are more fuel-efficient than an all chemical architecture without significant increases in flight times. This paper provides the analysis of the interplanetary segments of the three Evolvable Mars Campaign crew missions to Mars using the hybrid transportation architecture. The trajectory analysis provides departure and arrival dates and propellant needs for the three crew missions that are used by the campaign analysis team for campaign build-up and logistics aggregation analysis. Sensitivity analyses were performed to investigate the impact of mass growth, departure window, and propulsion system performance on the hybrid transportation architecture. The results and system analysis from this paper contribute to analyses of the other human spaceflight architecture team tasks and feed into the definition of the Evolvable Mars Campaign.

  18. Chemoviscosity modeling for thermosetting resin systems, part 3

    Hou, T. H.; Bai, J. M.

    1988-01-01

    A new analytical model for simulating chemoviscosity resin has been formulated. The model is developed by modifying the well established Williams-Landel-Ferry (WLF) theory in polymer rheology for thermoplastic materials. By introducing a relationship between the glass transition temperature (T sub g (t)) and the degree of cure alpha(t) of the resin system under cure, the WLF theory can be modified to account for the factor of reaction time. Temperature-dependent functions of the modified WLF theory parameters C sub 1 (T) and C sub 2 (T) were determined from the isothermal cure data. Theoretical predictions of the model for the resin under dynamic heating cure cycles were shown to compare favorably with the experimental data. This work represents a progress toward establishing a chemoviscosity model which is capable of not only describing viscosity profiles accurately under various cure cycles, but also correlating viscosity data to the changes of physical properties associated with the structural transformations of the thermosetting resin systems during cure.

  19. Transducer-actuator systems and methods for performing on-machine measurements and automatic part alignment

    Barkman, William E.; Dow, Thomas A.; Garrard, Kenneth P.; Marston, Zachary

    2016-07-12

    Systems and methods for performing on-machine measurements and automatic part alignment, including: a measurement component operable for determining the position of a part on a machine; and an actuation component operable for adjusting the position of the part by contacting the part with a predetermined force responsive to the determined position of the part. The measurement component consists of a transducer. The actuation component consists of a linear actuator. Optionally, the measurement component and the actuation component consist of a single linear actuator operable for contacting the part with a first lighter force for determining the position of the part and with a second harder force for adjusting the position of the part. The actuation component is utilized in a substantially horizontal configuration and the effects of gravitational drop of the part are accounted for in the force applied and the timing of the contact.

  20. Space Telecommunications Radio System (STRS) Architecture. Part 1; Tutorial - Overview

    Handler, Louis M.; Briones, Janette C.; Mortensen, Dale J.; Reinhart, Richard C.

    2012-01-01

    Space Telecommunications Radio System (STRS) Architecture Standard provides a NASA standard for software-defined radio. STRS is being demonstrated in the Space Communications and Navigation (SCaN) Testbed formerly known as Communications, Navigation and Networking Configurable Testbed (CoNNeCT). Ground station radios communicating the SCaN testbed are also being written to comply with the STRS architecture. The STRS Architecture Tutorial Overview presents a general introduction to the STRS architecture standard developed at the NASA Glenn Research Center (GRC), addresses frequently asked questions, and clarifies methods of implementing the standard. The STRS architecture should be used as a base for many of NASA s future telecommunications technologies. The presentation will provide a basic understanding of STRS.

  1. Ensemble Bayesian forecasting system Part I: Theory and algorithms

    Herr, Henry D.; Krzysztofowicz, Roman

    2015-05-01

    The ensemble Bayesian forecasting system (EBFS), whose theory was published in 2001, is developed for the purpose of quantifying the total uncertainty about a discrete-time, continuous-state, non-stationary stochastic process such as a time series of stages, discharges, or volumes at a river gauge. The EBFS is built of three components: an input ensemble forecaster (IEF), which simulates the uncertainty associated with random inputs; a deterministic hydrologic model (of any complexity), which simulates physical processes within a river basin; and a hydrologic uncertainty processor (HUP), which simulates the hydrologic uncertainty (an aggregate of all uncertainties except input). It works as a Monte Carlo simulator: an ensemble of time series of inputs (e.g., precipitation amounts) generated by the IEF is transformed deterministically through a hydrologic model into an ensemble of time series of outputs, which is next transformed stochastically by the HUP into an ensemble of time series of predictands (e.g., river stages). Previous research indicated that in order to attain an acceptable sampling error, the ensemble size must be on the order of hundreds (for probabilistic river stage forecasts and probabilistic flood forecasts) or even thousands (for probabilistic stage transition forecasts). The computing time needed to run the hydrologic model this many times renders the straightforward simulations operationally infeasible. This motivates the development of the ensemble Bayesian forecasting system with randomization (EBFSR), which takes full advantage of the analytic meta-Gaussian HUP and generates multiple ensemble members after each run of the hydrologic model; this auxiliary randomization reduces the required size of the meteorological input ensemble and makes it operationally feasible to generate a Bayesian ensemble forecast of large size. Such a forecast quantifies the total uncertainty, is well calibrated against the prior (climatic) distribution of

  2. Diagnosing and curing system freeze-ups: Part II

    Frey, R. [Heating and Plumbing Service, Sparta, NJ (United States)

    1996-02-01

    In our last article, we discussed determination and possible causes leading to frozen pipes in the heating system. We now turn to the matter of dealing with such freeze-ups. There are two major categories of frozen heating systems. The first and worst we can label the {open_quotes}Floridian Flew{close_quotes} type, when the usual occupants have taken off for warmer climates. The second is the {open_quotes}Howcudit {open_quote}B{close_quote} virus,{close_quotes} which occurs to normal people under an unusual Arctic Attack right while they are living there. Regarding the first, I never cease to be amazed how folks can just up and leave their house for three days to three months without making proper arrangements for monitoring the temperature of their home during their absence. There are a frightening number of humanoids out there, who either lack a minimal presence of common sense, or who are terrible gamblers. The amazing thing is that some of these folks wouldn`t even gamble a postage stamp on a magazine sweepstakes, but still will gamble the contents of their home by driving off for two weeks at Disneyland in the middle of January without ever making any provision for assuring that their house doesn`t freeze up while they are away. The {open_quotes}Howcudit {open_quote}B{close_quote}{close_quotes} type is not nearly as devasting as the {open_quotes}Floridian Flew.{close_quotes} Imagine coming home to an icy cold house after flying in from the sunny beaches of some tropical paradise. The oilburner switch is on. The thermostate is set at 60 where we left it, but the needle is buried somewhere down behind the cover, like it is cowering from guilt. {open_quotes}Oh Man! I just checked the bathroom; there is an icicle hanging from the vanity faucet and the toilet bowl is a block of ice.{close_quotes}

  3. The Systemic Theory of Living Systems. Part IV: Systemic Medicine—The Praxis

    José A. Olalde Rangel

    2005-01-01

    Full Text Available This fourth lecture illustrates the praxis and results of Systemic Medicine (SM in various therapeutic applications. SM's success has made it popular throughout Venezuela and Puerto Rico. The treatment of over 300 000 patients by 150 orthodox MD's, trained and qualified in SM, in 35 medical establishments with above average results corroborate its effectiveness as an eCAM in chronic degenerative diseases. Herein we provide a synopsis of results obtained in four such pathologies—the journal's necessary space restrictions somewhat limiting content—as well as clinical and photographic evidence. The validity of any medical theory is substantiated by its degree of effectivity and success. The workability of evidence-based SM corroborates Systemic Theory's transcendence.

  4. Mars Hybrid Propulsion System Trajectory Analysis. Part II; Cargo Missions

    Chai, Patrick R.; Merrill, Raymond G.; Qu, Min

    2015-01-01

    NASA's Human Spaceflight Architecture Team is developing a reusable hybrid transportation architecture in which both chemical and electric propulsion systems are used to send crew and cargo to Mars destinations such as Phobos, Deimos, the surface of Mars, and other orbits around Mars. By combining chemical and electrical propulsion into a single spaceship and applying each where it is more effective, the hybrid architecture enables a series of Mars trajectories that are more fuel-efficient than an all chemical architecture without significant increases in flight times. This paper shows the feasibility of the hybrid transportation architecture to pre-deploy cargo to Mars and Phobos in support of the Evolvable Mars Campaign crew missions. The analysis shows that the hybrid propulsion stage is able to deliver all of the current manifested payload to Phobos and Mars through the first three crew missions. The conjunction class trajectory also allows the hybrid propulsion stage to return to Earth in a timely fashion so it can be reused for additional cargo deployment. The 1,100 days total trip time allows the hybrid propulsion stage to deliver cargo to Mars every other Earth-Mars transit opportunity. For the first two Mars surface mission in the Evolvable Mars Campaign, the short trip time allows the hybrid propulsion stage to be reused for three round-trip journeys to Mars, which matches the hybrid propulsion stage's designed lifetime for three round-trip crew missions to the Martian sphere of influence.

  5. Disaster Management: AN Integral Part of Science & Technology System and Land Administration-Management System

    Ghawana, T.; Zlatanova, S.

    2016-06-01

    Disaster management is a multidisciplinary field, which requires a general coordination approach as well as specialist approaches. Science and Technology system of a country allows to create policies and execution of technical inputs required which provide services for the specific types of disasters management. Land administration and management agencies, as the administrative and management bodies, focus more on the coordination of designated tasks to various agencies responsible for their dedicated roles. They get help from Scientific and technical inputs & policies which require to be implemented in a professional manner. The paper provides an example of such integration from India where these two systems complement each other with their dedicated services. Delhi, the Capital of India, has such a disaster management system which has lot of technical departments of government which are mandated to provide their services as Emergency Service Functionaries. Thus, it is shown that disaster management is a job which is an integral part of Science & Technology system of a country while being implemented primarily with the help of land administration and management agencies. It is required that new policies or mandates for the Science and technology organizations of government should give a primary space to disaster management

  6. Improved Management of Part Safety Classification System for Nuclear Power Plant

    Park, Jin Young; Park, Youn Won; Park, Heung Gyu; Park, Hyo Chan [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    As, in recent years, many quality assurance (QA) related incidents, such as falsely-certified parts and forged documentation, etc., were reported in association with the supply of structures, systems, components and parts to nuclear power plants, a need for a better management of safety classification system was addressed so that it would be based more on the level of parts . Presently, the Korean nuclear power plants do not develop and apply relevant procedures for safety classifications, but rather the safety classes of parts are determined solely based on the experience of equipment designers. So proposed in this paper is a better management plan for safety equipment classification system with an aim to strengthen the quality management for parts. The plan was developed through the analysis of newly introduced technical criteria to be applied to parts of nuclear power plant.

  7. High efficient ammonia heat pump system for industrial process water using the ISEC concept. Part 2

    Olesen, Martin F.; Madsen, Claus; Olsen, Lars

    2014-01-01

    The Isolated System Energy Charging (ISEC) concept allows for a high efficiency of a heat pump system for hot water production. The ISEC concept consists of two water storage tanks, one charged and one discharged. The charged tank is used for the industrial process, while the discharged tank...... is charging. The charging of the tank is done by recirculating water through the condenser and thereby gradually heating the water. The modelling of the system is described in Part I [1]. In this part, Part II, an experimental test setup of the tank system is reported, the results are presented and further...... modelling of the heat pump and tank system is performed (in continuation of Part I). The modelling is extended to include the system performance with different natural refrigerants and the influence of different types of compressors....

  8. [Clinical observation of peptic ulcer treated with acupuncture based on theory of "the compatibility of the five meridians" in Huxiang].

    Li, Cuiying; Li, Jinxiang; Pan, Shimin; Zhang, Xi; Li, Ying

    2017-08-12

    To compare the effects differences for peptic ulcer between acupuncture based on the theory of "the compatibility of the five meridians" in Huxiang and conventional western medication. Sixty patients with peptic ulcer of liver-stomach disharmony type (LSDT) and weakness of spleen and stomach type (WSST) were assigned into an observation group and a control group by block randomization according to syndrome differentiation.Finally,28 cases (17 with LSDT and 11 with WSST) in the observation group,29 cases (18 with LSDT and 11 with WSST) in the control group were included.In the observation group,patients with LSDT were treated with acupuncture at Zhongwan (CV 12),Taichong (LR 3),Xingjian (LR 2),Qimen (LR 14),Zusanli (ST 36),Gongsun (SP 4),Shaofu (HT 8),Jingqu (LU 8),Neiguan (PC 6); those with WSST,at Zhongwan (CV 12),Dadu (SP 2),Taibai (SP 3),Yinlingquan (SP 9),Zusanli (ST 36),Shaofu (HT 8), Taichong (LR 3),Yingu (KI 10),Taixi (KI 3),Taiyuan (LU 9) according to the theory of "the compatibility of the five meridians" in Huxiang .Reinforcing and reducing were according to syndrome differentiation.The treatment was given once a day with needle retained for 30 min,5 days a week,2 days at interval.In the control group,the conventional triple drugs (omeprazole,amoxicillin and clarithromycin) were prescribed orally for Hp positive patients,and omeprazole for Hp negative patients.All the patients were treated for 4 weeks.The clinical syndrome score,ulcer healing under gastroscope,anti-Hp infection and Hp negative conversion ratio rate were observed in the two groups before and after treatment as well as 1 month after treatment.The total effects were evaluated. The syndrome scores after treatment and at 1 month ofter treatment decreased in the two groups (all P 0.05).The scores within the group between the two syndromes showed no significance in the two groups (both P >0.05).The cure rates under gastroscope,anti-Hp infection rates and the total rates had no statistically

  9. Use of Data for Fiscal Management of State Part C Systems

    Greer, Maureen; Kilpatrick, Jamie; McCullough, Katy; Reid, Kellen

    2015-01-01

    "Use of Data for Fiscal Management of State Part C Systems" is designed to increase the knowledge and skills of lead agency staff regarding the use of data for appropriate fiscal management of Part C. This document addresses budget development and management. This document has three sections: (1) Budget Development and Management; (2)…

  10. LOLA SYSTEM: A code block for nodal PWR simulation. Part. I - Simula-3 Code

    Aragones, J M; Ahnert, C; Gomez Santamaria, J; Rodriguez Olabarria, I

    1985-07-01

    Description of the theory and users manual of the SIMULA-3 code, which is part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. SIMULA-3 is the main module of the system, it uses a modified nodal theory, with interface leakages equivalent to the diffusion theory. (Author) 4 refs.

  11. LOLA SYSTEM: A code block for nodal PWR simulation. Part. I - Simula-3 Code

    Aragones, J. M.; Ahnert, C.; Gomez Santamaria, J.; Rodriguez Olabarria, I.

    1985-01-01

    Description of the theory and users manual of the SIMULA-3 code, which is part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. SIMULA-3 is the main module of the system, it uses a modified nodal theory, with interface leakages equivalent to the diffusion theory. (Author) 4 refs

  12. Research advances in treatment of neurological and psychological diseases by acupuncture at the Acupuncture Meridian Science Research Center

    Bombi Lee

    2014-06-01

    Full Text Available Acupuncture is an ancient therapeutic intervention that can be traced back at least 2100 years and is emerging worldwide as one of the most widely used therapies in the field of complementary and alternative medicine. Due to limitations associated with Western medicine's focus on the treatment of diseases rather than on their causes, interests are shifting to complementary and alternative medicines. The Acupuncture and Meridian Science Research Center (AMSRC was established in 2005 to elucidate the neurophysiological mechanisms of acupuncture for neurological diseases based on multidisciplinary research supported by the Korean Ministry of Science and Technology. In the AMSRC, resultant research articles have shown that acupuncture can improve neurological and psychological problems, including Parkinson's disease, pain, and depression, in animal models. Basic research studies suggest its effectiveness in treating various problems such as depression, drug addiction, epilepsy, ischemia, dementia, Parkinson's disease, and pain. We strongly believe that these effects, evident from the AMSRC research results, can play leading roles in the use of acupuncture for treating neurological diseases, based on collaboration among various academic fields such as neurophysiology, molecular genetics, and traditional Korean medicine.

  13. A low-cost machine vision system for the recognition and sorting of small parts

    Barea, Gustavo; Surgenor, Brian W.; Chauhan, Vedang; Joshi, Keyur D.

    2018-04-01

    An automated machine vision-based system for the recognition and sorting of small parts was designed, assembled and tested. The system was developed to address a need to expose engineering students to the issues of machine vision and assembly automation technology, with readily available and relatively low-cost hardware and software. This paper outlines the design of the system and presents experimental performance results. Three different styles of plastic gears, together with three different styles of defective gears, were used to test the system. A pattern matching tool was used for part classification. Nine experiments were conducted to demonstrate the effects of changing various hardware and software parameters, including: conveyor speed, gear feed rate, classification, and identification score thresholds. It was found that the system could achieve a maximum system accuracy of 95% at a feed rate of 60 parts/min, for a given set of parameter settings. Future work will be looking at the effect of lighting.

  14. [Observation on changes of oxygen partial pressure in the deep tissues along the large intestine meridian during acupuncture in healthy subjects].

    Chen, Ming; Hu, Xiang-long; Wu, Zu-xing

    2010-06-01

    To observe changes of the partial oxygen pressure in the deep tissues along the Large Intestine Meridian (LIM) during acupuncture stimulation, so as to reveal the characteristics of energy metabolism in the tissues along the LIM. Thirty-one healthy volunteer subjects were enlisted in the present study. Partial oxygen pressure (POP) in the tissues (at a depth of about 1.5 cm) of acupoints Binao (LI 14), Shouwuli (LI 13), Shousanli (LI 10), 2 non-acupoints [the midpoints between Quchi (LI 11) and LI 14, and between Yangxi (LI 5) and LI 11) of the LIM, and 10 non-meridian points, 1.5-2.0 cm lateral and medial to each of the tested points of the LIM was detected before, during and after electroacupuncture (EA) stimulation of Hegu (LI 4) by using a tissue oxygen tension needle-like sensor. In normal condition, the POP values in the deep tissues along the LIM were significantly higher than those of the non-meridian control points on its bilateral sides. During and after EA of Hegu (LI 4), the POP levels decreased significantly in the deep tissues along the LIM in comparison with pre-EA (P 0.05). POP is significantly higher in the deep tissues along the LIM of healthy subjects under normal conditions, which can be downregulated by EA of Hegu (LI 4), suggesting an increase of both the utilization rate of oxygen and energy metabolism after EA.

  15. Safety parameter display system functions are integrated parts of the KWU KONVOI process information system (SPDS functions are parts of the KWU-PRINS)

    Aleite, W.; Geyer, K.H.

    1984-01-01

    The desirability of having flexible overview as well as extended detail information with pictorial and abstraction features and easy and quick access throughout the large-size control rooms in German plants has been recognized. Developments over the last years now make it possible to add on extensive computer driven VDU-systems to the three German KONVOI NPPs (Isar II, Emsland and Neckarwestheim II) thereby creating the Process Information System ''PRINS''. The new system is driven by multiple computers at different locations controlling about 30 full-graphic, high resolution Video Display Units. They are arranged singly and in three ''mxn - Information Panels'' distributed about the control room and present all thinkable kinds of display formats with more than 1000 separate pictures. The display of only single ''Safety Parameters'' or even complete ''Safety Goal Information'' on single or multiple VDUs in parallel is only one aspect of this computerized part of the entire integrated Information System. (orig./HP)

  16. 16 CFR Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength

    2010-01-01

    ...—Apparatus for Test of Retention System Strength ER10MR98.008 ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Apparatus for Test of Retention System Strength 8 Figure 8 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT...

  17. 14 CFR Appendix I to Part 25 - Installation of an Automatic Takeoff Thrust Control System (ATTCS)

    2010-01-01

    ... Appendix I to Part 25—Installation of an Automatic Takeoff Thrust Control System (ATTCS) I25.1General. (a... crew to increase thrust or power. I25.2Definitions. (a) Automatic Takeoff Thrust Control System (ATTCS... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation of an Automatic Takeoff Thrust...

  18. 32 CFR Appendix D to Part 169a - Commercial Activities Management Information System (CAMIS)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Commercial Activities Management Information... to Part 169a—Commercial Activities Management Information System (CAMIS) Each DoD Component shall... American Standard Code Information Interchange text file format on a MicroSoft-Disk Operating System...

  19. Efficient computation of quasiperiodic oscillations in nonlinear systems with fast rotating parts

    Schilder, Frank; Rübel, Jan; Starke, Jens

    2008-01-01

    We present a numerical method for the investigation of quasiperiodic oscillations in applications modeled by systems of ordinary differential equations. We focus on systems with parts that have a significant rotational speed. An important element of our approach is that it allows us to verify whe...

  20. A statistical approach to guide the management of the anterior part of the sewer system

    Post, J.A.B.

    2016-01-01

    The anterior part of the sewer system consists of a system of gully pots and lateral (house) connections that drain to main sewers. The total length of lateral house connections can be similar to the total length of the sewers they drain to. In addition, there are 7 million gully pots with

  1. Phase-ambiguity resolution for QPSK modulation systems. Part 1: A review

    Nguyen, Tien Manh

    1989-01-01

    Part 1 reviews the current phase-ambiguity resolution techniques for QPSK coherent modulation systems. Here, those known and published methods of resolving phase ambiguity for QPSK with and without Forward-Error-Correcting (FEC) are discussed. The necessary background is provided for a complete understanding of the second part where a new technique will be discussed. An appropriate technique to the Consultative Committee for Space Data Systems (CCSDS) is recommended for consideration in future standards on phase-ambiguity resolution for QPSK coherent modulation systems.

  2. High energy X-ray CT system using a linear accelerator for automobile parts inspection

    Kanamori, T.; Sukita, T.

    1995-01-01

    A high energy X-ray CT system (maximum photon energy: 0.95 MeV) has been developed for industrial use. This system employs a linear accelerator as an X-ray source. It is able to image the cross section of automobile parts and can be applied to a solidification analysis study of the cylinder head in an automobile. This paper describes the features of the system and application results which can be related to solidification analysis of the cylinder head when fabricated from an aluminum casting. Some cross-sectional images are also presented as evidence for nondestructive inspection of automobile parts. (orig.)

  3. REPLACEMENT SPARE PART INVENTORY MONITORING USING ADAPTIVE NEURO FUZZY INFERENCE SYSTEM

    Hartono Hartono

    2016-01-01

    Full Text Available Abstract   The amount of inventory is determined on the basis of the demand. So that users can know the demand forecasts need to be done on the request. This study uses the data to implement a replacement parts on the electronic module production equipment in the telecommunications transmission systems, switching, access and power, ie by replacing the electronic module in the system is trouble  or damaged parts of a good electronic module spare parts inventory, while the faulty electronic modules shipped to the Repair Center for repaired again, so that the results of these improvements can replenish spare part  inventory. Parameters speed on improvement process of electronic module broken (repaired, in the form of an average repair time at the repair centers, in order to get back into the electronic module that is ready for used as spare parts in compliance with the safe supply inventory  warehouse.  This research using the method  of  Adaptive Neuro Fuzzy Inference System (ANFIS in developing a decision support system for inventory control of spare parts available in Warehouse Inventory taking into account several parameters supporters, namely demand, improvement and fulfillment of spare parts and repair time. This study uses a recycling input parameter repair faulty electronic module of the customer to immediately replace the module in inventory warehouse,  do improvements in the Repair Center. So the acceleration restoration factor is very influential as the input spare parts inventory supply in the warehouse and using the Adaptive Neuro-Fuzzy Inference System (ANFIS method.   Keywords: ANFIS, inventory control, replacement

  4. Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

    Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

    This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

  5. Nuclear computerized library for assessing reactor reliability (NUCLARR): User's guide: Part 3, NUCLARR system description

    Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

    1988-06-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 3: NUCLARR System Description, provides an in-depth discussion of the design characteristics and special features of the NUCLARR software. Part 3 also presents the organization of the data base structures and techniques used to manipulate the data

  6. THE PROJECT OF THE EXPERT SYSTEM TO SUPPORTING OF SELECTION OF PARTS AND ASSEMBLIES OF MACHINES

    Sebastian RZYDZIK

    2014-06-01

    Full Text Available This paper the design of the expert system that supports mechanical engineer in the process of selecting the parts and assemblies was presented. In the description of the proposed expert system, was made reference to the general form of such systems, that consist of such components as: user interface, inference engine, knowledge base and database. It also, scenario that describes the steps of the use of the proposed expert system was presented. Finally, an example of the use the expert system during the selection of the components of the drive system was shown.

  7. Closing the Knowledge Gap: Effects of Land Use Conversion on Belowground Carbon near the 100th Meridian

    Waldron, S. E.; Phillips, R. L.; Dell, R.; Suddick, E. C.

    2012-12-01

    Native prairie of the northern Great Plains near the 100th meridian is currently under land use conversion pressure due to high commodity prices. From 2002 to 2007, approximately 303,515 hectares of prairie were converted to crop production in the Prairie Pothole Region (PPR) from Montana to the Dakotas. The spatiotemporal effects of land-use conversion on soil organic matter are still unclear for the PPR. Effects will vary with management, soil properties and time, making regional experiments and simulation modeling necessary. Grassland conservationists are interested in soil carbon data and soil carbon simulation models to inform potential voluntary carbon credit programs. These programs require quantification of changes in soil carbon associated with land-use conversion and management. We addressed this issue by 1) designing a regional-scale experiment, 2) collecting and analyzing soil data, and 3) interviewing producers about land management practices, as required for regional, process-based biogeochemical models. We selected farms at random within a 29,000 km2 area of interest and measured soil properties at multiple depths for native prairie and adjacent annual crop fields. The cores were processed at six different depths (between 0 and 100 cm) for bulk density, pH, texture, total carbon, inorganic carbon, and total nitrogen. We found that the largest difference in soil organic carbon occurred at the 0-10 cm depth, but the magnitude of the effect of land use varied with soil properties and land management. Results from this project, coupled with regional model simulations (Denitrification-Decomposition, DNDC) represent the baseline data needed for future voluntary carbon credit programs and long-term carbon monitoring networks. Enrollment in such programs could help ranchers and farmers realize a new income stream from maintaining their native prairie and the carbon stored beneath it.

  8. An ultraviolet-visible spectrophotometer automation system. Part 3: Program documentation

    Roth, G. S.; Teuschler, J. M.; Budde, W. L.

    1982-07-01

    The Ultraviolet-Visible Spectrophotometer (UVVIS) automation system accomplishes 'on-line' spectrophotometric quality assurance determinations, report generations, plot generations and data reduction for chlorophyll or color analysis. This system also has the capability to process manually entered data for the analysis of chlorophyll or color. For each program of the UVVIS system, this document contains a program description, flowchart, variable dictionary, code listing, and symbol cross-reference table. Also included are descriptions of file structures and of routines common to all automated analyses. The programs are written in Data General extended BASIC, Revision 4.3, under the RDOS operating systems, Revision 6.2. The BASIC code has been enhanced for real-time data acquisition, which is accomplished by CALLS to assembly language subroutines. Two other related publications are 'An Ultraviolet-Visible Spectrophotometer Automation System - Part I Functional Specifications,' and 'An Ultraviolet-Visible Spectrophotometer Automation System - Part II User's Guide.'

  9. Continuous Improvement and Employee Engagement, Part 2: Design, Implementation, and Outcomes of a Daily Management System.

    Maurer, Marsha; Browall, Pamela; Phelan, Cynthia; Sanchez, Sandra; Sulmonte, Kimberlyann; Wandel, Jane; Wang, Allison

    2018-04-01

    A daily management system (DMS) can be used to implement continuous quality improvement and advance employee engagement. It can empower staff to identify problems in the care environment that impact quality or work flow and to address them on a daily basis. Through a DMS, improvement becomes the work of everyone, every day. The authors of this 2-part series describe their work to develop a DMS. Part 2 describes the implementation and outcomes of the program.

  10. Army Contracting Officials Could Have Purchased Husky Mounted Detection System Spare Parts at Lower Prices (Redacted)

    2016-03-31

    system mounted on an armored vehicle . It detects and marks landmines and other buried explosive hazards, and serves an important role in keeping...countries. Figure 1. HMDS Shown on a Husky Vehicle Source: Project Manager Close Combat Systems FOR OFFICIAL USE ONLY FOR OFFICIAL USE ONLY Introduction...Reasonable Prices From Meggitt Aircraft Braking Systems for Sole-Source Commercial Spare Parts,” May 8, 2015 Report No. DODIG-2015-103, “Summary of

  11. Advanced Hard Real-Time Operating System, The Maruti Project. Part 1.

    1997-01-01

    REAL - TIME OPERATING SYSTEM , THE MARUTI PROJECT Part 1 of 2 Ashok K. Agrawala Satish K. Tripathi Department of Computer Science University of Maryland...Hard Real - Time Operating System , The Maruti Project DASG-60-92-C-0055 5b. Program Element # 62301E 6. Author(s) 5c. Project # DRPB Ashok K. Agrawala...SdSA94), a real - time operating system developed at the I3nversity of Maryland, and conducted extensive experiments under various task

  12. Environmental assessment of three egg production systems--Part I: Monitoring system and indoor air quality.

    Zhao, Y; Shepherd, T A; Li, H; Xin, H

    2015-03-01

    To comprehensively assess conventional vs. some alternative laying-hen housing systems under U.S. production conditions, a multi-institute and multi-disciplinary project, known as the Coalition for Sustainable Egg Supply (CSES) study, was carried out at a commercial egg production farm in the Midwestern United States over two single-cycle production flocks. The housing systems studied include a conventional cage house (200,000 hen capacity), an aviary house (50,000 hen capacity), and an enriched colony house (50,000 hen capacity). As an integral part of the CSES project, continual environmental monitoring over a 27-month period described in this paper quantifies indoor gaseous and particulate matter concentrations, thermal environment, and building ventilation rate of each house. Results showed that similar indoor thermal environments in all three houses were maintained through ventilation management and environmental control. Gaseous and particulate matter concentrations of the enriched colony house were comparable with those of the conventional cage house. In comparison, the aviary house had poorer indoor air quality, especially in wintertime, resulting from the presence of floor litter (higher ammonia levels) and hens' activities (higher particulate matter levels) in it. Specifically, daily mean indoor ammonia concentrations had the 95% confidence interval values of 3.8 to 4.2 (overall mean of 4.0) ppm for the conventional cage house; 6.2 to 7.2 (overall mean of 6.7) ppm for the aviary house; and 2.7 to 3.0 (overall mean of 2.8) ppm for the enriched colony house. The 95% confidence interval (overall mean) values of daily mean indoor carbon dioxide concentrations were 1997 to 2170 (2083) ppm for the conventional cage house, 2367 to 2582 (2475) ppm for the aviary house, and 2124 to 2309 (2216) ppm for the enriched colony house. Daily mean indoor methane concentrations were similar for all three houses, with 95% confidence interval values of 11.1 to 11.9 (overall

  13. Formulation, computation and improvement of steady state security margins in power systems. Part II: Results

    Echavarren, F.M.; Lobato, E.; Rouco, L.; Gomez, T.

    2011-01-01

    A steady state security margin for a particular operating point can be defined as the distance from this initial point to the secure operating limits of the system. Four of the most used steady state security margins are the power flow feasibility margin, the contingency feasibility margin, the load margin to voltage collapse, and the total transfer capability between system areas. This is the second part of a two part paper. Part I has proposed a novel framework of a general model able to formulate, compute and improve any steady state security margin. In Part II the performance of the general model is validated by solving a variety of practical situations in modern real power systems. Actual examples of the Spanish power system will be used for this purpose. The same computation and improvement algorithms outlined in Part I have been applied for the four security margins considered in the study, outlining the convenience of defining a general framework valid for the four of them. The general model is used here in Part II to compute and improve: (a) the power flow feasibility margin (assessing the influence of the reactive power generation limits in the Spanish power system), (b) the contingency feasibility margin (assessing the influence of transmission and generation capacity in maintaining a correct voltage profile), (c) the load margin to voltage collapse (assessing the location and quantity of loads that must be shed in order to be far away from voltage collapse) and (d) the total transfer capability (assessing the export import pattern of electric power between different areas of the Spanish system). (author)

  14. Formulation, computation and improvement of steady state security margins in power systems. Part II: Results

    Echavarren, F.M.; Lobato, E.; Rouco, L.; Gomez, T. [School of Engineering of Universidad Pontificia Comillas, C/Alberto Aguilera, 23, 28015 Madrid (Spain)

    2011-02-15

    A steady state security margin for a particular operating point can be defined as the distance from this initial point to the secure operating limits of the system. Four of the most used steady state security margins are the power flow feasibility margin, the contingency feasibility margin, the load margin to voltage collapse, and the total transfer capability between system areas. This is the second part of a two part paper. Part I has proposed a novel framework of a general model able to formulate, compute and improve any steady state security margin. In Part II the performance of the general model is validated by solving a variety of practical situations in modern real power systems. Actual examples of the Spanish power system will be used for this purpose. The same computation and improvement algorithms outlined in Part I have been applied for the four security margins considered in the study, outlining the convenience of defining a general framework valid for the four of them. The general model is used here in Part II to compute and improve: (a) the power flow feasibility margin (assessing the influence of the reactive power generation limits in the Spanish power system), (b) the contingency feasibility margin (assessing the influence of transmission and generation capacity in maintaining a correct voltage profile), (c) the load margin to voltage collapse (assessing the location and quantity of loads that must be shed in order to be far away from voltage collapse) and (d) the total transfer capability (assessing the export import pattern of electric power between different areas of the Spanish system). (author)

  15. A review on fault classification methodologies in power transmission systems: Part-II

    Avagaddi Prasad

    2018-05-01

    Full Text Available The countless extent of power systems and applications requires the improvement in suitable techniques for the fault classification in power transmission systems, to increase the efficiency of the systems and to avoid major damages. For this purpose, the technical literature proposes a large number of methods. The paper analyzes the technical literature, summarizing the most important methods that can be applied to fault classification methodologies in power transmission systems.The part 2 of the article is named “A review on fault classification methodologies in power transmission systems”. In this part 2 we discussed the advanced technologies developed by various researchers for fault classification in power transmission systems. Keywords: Transmission line protection, Protective relaying, Soft computing techniques

  16. Routes to chaos in continuous mechanical systems: Part 2. Modelling transitions from regular to chaotic dynamics

    Krysko, A.V.; Awrejcewicz, J.; Papkova, I.V.; Krysko, V.A.

    2012-01-01

    In second part of the paper both classical and novel scenarios of transition from regular to chaotic dynamics of dissipative continuous mechanical systems are studied. A detailed analysis allowed us to detect the already known classical scenarios of transition from periodic to chaotic dynamics, and in particular the Feigenbaum scenario. The Feigenbaum constant was computed for all continuous mechanical objects studied in the first part of the paper. In addition, we illustrate and discuss different and novel scenarios of transition of the analysed systems from regular to chaotic dynamics, and we show that the type of scenario depends essentially on excitation parameters.

  17. Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

    Fitriana, Rina; Moengin, Parwadi; Riana, Mega

    2016-02-01

    Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

  18. Effectiveness Analysis of a Part-Time Rapid Response System During Operation Versus Nonoperation.

    Kim, Youlim; Lee, Dong Seon; Min, Hyunju; Choi, Yun Young; Lee, Eun Young; Song, Inae; Park, Jong Sun; Cho, Young-Jae; Jo, You Hwan; Yoon, Ho Il; Lee, Jae Ho; Lee, Choon-Taek; Do, Sang Hwan; Lee, Yeon Joo

    2017-06-01

    To evaluate the effect of a part-time rapid response system on the occurrence rate of cardiopulmonary arrest by comparing the times of rapid response system operation versus nonoperation. Retrospective cohort study. A 1,360-bed tertiary care hospital. Adult patients admitted to the general ward were screened. Data were collected over 36 months from rapid response system implementation (October 2012 to September 2015) and more than 45 months before rapid response system implementation (January 2009 to September 2012). None. The rapid response system operates from 7 AM to 10 PM on weekdays and from 7 AM to 12 PM on Saturdays. Primary outcomes were the difference of cardiopulmonary arrest incidence between pre-rapid response system and post-rapid response system periods and whether the rapid response system operating time affects the cardiopulmonary arrest incidence. The overall cardiopulmonary arrest incidence (per 1,000 admissions) was 1.43. Although the number of admissions per month and case-mix index were increased (3,555.18 vs 4,564.72, p times (0.82 vs 0.49/1,000 admissions; p = 0.001) but remained similar during rapid response system nonoperating times (0.77 vs 0.73/1,000 admissions; p = 0.729). The implementation of a part-time rapid response system reduced the cardiopulmonary arrest incidence based on the reduction of cardiopulmonary arrest during rapid response system operating times. Further analysis of the cost effectiveness of part-time rapid response system is needed.

  19. Integration of new nuclear power plants into transmission grids part I: Transmission system issues

    Abi-Samra, N.

    2008-01-01

    Integration of new nuclear plants into a transmission system is a two sided problem. On one side, adding the nuclear plant into an existing grid will change the attributes of that grid: e.g., loading of certain transmission lines will increase; voltages will be affected, etc. On the other side, the grid itself will affect the plant, and the plant needs to be designed to accommodate the specifics of the grid. Based on that, this paper is divided into two parts. Part I addresses the grid issues with the integration of the new plant, with emphasis on the electrical aspects of these issues. Part II of this paper, concentrates on the vulnerability of the plant from grid disturbances. Part II reintroduces a relatively new concept by this author called the Zone of Vulnerability (ZoV) for the new nuclear plants. (authors)

  20. Recursive macro generator for the TAS-86 language. First part: the macro generator language. Second part: system internal logics

    Zraick, Samir

    1970-01-01

    A macro-generator is a translator which is able to interpret and translate a programme written in a macro-language. After a first part presenting the main notions and proposing a brief description of the TAS-86 language, the second part of this research thesis reports the development of the macro-generator language, and notably presents the additional functionalities provided by the macro generator. The development is illustrated by logical flowcharts and programming listings

  1. Mandibular implant-supported overdentures: attachment systems, and number and locations of implants--Part I.

    Warreth, Abdulhadi; Alkadhimi, Aslam Fadel; Sultan, Ahmed; Byrne, Caroline; Woods, Edel

    2015-01-01

    The use of dental implants in replacing missing teeth is an integral part of restorative dental treatment. Use of conventional complete dentures is associated with several problems such as lack of denture stability, support and retention. However, when mandibular complete dentures were used with two or more implants, an improvement in the patients' psychological and social well-being could be seen. There is general consensus that removable implant-supported overdentures (RISOs) with two implants should be considered as the first-choice standard of care for an edentulous mandible. This treatment option necessitates the use of attachment systems that connect the complete denture to the implant. Nevertheless, each attachment system has its inherent advantages and disadvantages, which should be considered when choosing a system. The first part of this article provides an overview on options available to restore the mandibular edentulous arch with dental implants. Different types of attachment systems, their features and drawbacks are also reviewed.

  2. Non-destructive evaluation of welding part of stainless steels by phased array system

    Tatematsu, Nobuhiro; Matsumoto, Eiji

    2009-01-01

    Recently, more accurate and convenient Non-Destructive Evaluation techniques are required for flaw inspection of structural materials. Phased array ultrasonic transducers are expected as such as NDE technique but there are many subjects to be solved. Furthermore, commercial phased array systems with conventional scanning and imaging techniques have not fulfilled their maximum potential. The purpose of this paper is to improve the phased array system to be applicable to the inhomogeneity evaluation of welding part of stainless steels. (author)

  3. Safety study of PCC 2140 and ALILOG 21 used as part of safety measurement systems

    Meriaux, Pierre; Adnot, Serge; Rayrolles, Catherine.

    1978-03-01

    The PCC 2140 and ALILOG 21 equipment may be used at C.E.A. or E.D.F., as part of safety measurement systems. In a study of a similar, but earlier equipment, it was noticed that certain types of failures caused the system to switch to the least sensitive measurement range, which was detrimental to safety. This report analyses failure modes leading to unsafe failures and evaluates the risks ran into taking in account tests during use [fr

  4. 32 CFR Appendix E to Part 247 - DoD Command Newspaper and Magazine Review System

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false DoD Command Newspaper and Magazine Review System... OF DEFENSE (CONTINUED) MISCELLANEOUS DEPARTMENT OF DEFENSE NEWSPAPERS, MAGAZINES AND CIVILIAN ENTERPRISE PUBLICATIONS Pt. 247, App. E Appendix E to Part 247—DoD Command Newspaper and Magazine Review...

  5. Towards an empirical method of usability testing of system parts : a methodological study

    Brinkman, W.P.; Haakma, R.; Bouwhuis, D.G.

    2007-01-01

    Current usability evaluation methods are essentially holistic in nature. However, engineers that apply a component-based software engineering approach might also be interested in understanding the usability of individual parts of an interactive system. This paper examines the efficiency dimension of

  6. An expert system for process planning of sheet metal parts produced

    Process planning of sheet metal part is an important activity in the design of compound die. Traditional methods of carrying out this task are manual, tedious, time-consuming, error-prone and experiencebased. This paper describes the research work involved in the development of an expert system for process planning of ...

  7. 75 FR 68224 - Safety Management Systems for Part 121 Certificate Holders

    2010-11-05

    ... safety audit (LOSA), and an advanced qualification program (AQP) as part of the SMS. The FAA must issue a... the SMS safety assurance process, periodic audits of flight crew performance, such as Line Operations... programs: ASAPs, flight operational quality assurance systems (FOQAs), LOSAs, and advanced qualification...

  8. A new method of 3-D cephalometry Part I: the anatomic Cartesian 3-D reference system.

    Swennen, G.R.J.; Schutyser, F.A.C.; Barth, E.L.; Groeve, P. De; Mey, A. De

    2006-01-01

    The purpose of this study was to present a new innovative three-dimensional (3-D) cephalometric method. Part I deals with the set-up and validation of a voxel-based semi-automatic 3-D cephalometric reference system. The CT data (DICOM 3.0 files) of 20 control patients with normal skeletal

  9. Document control system as an integral part of RA documentation database application

    Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

    2005-01-01

    The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

  10. BEHAVE: fire behavior prediction and fuel modeling system-BURN Subsystem, part 1

    Patricia L. Andrews

    1986-01-01

    Describes BURN Subsystem, Part 1, the operational fire behavior prediction subsystem of the BEHAVE fire behavior prediction and fuel modeling system. The manual covers operation of the computer program, assumptions of the mathematical models used in the calculations, and application of the predictions.

  11. Design of a Loose Part Monitoring System Test-bed using CompactRIO

    Kim, Min-seok; Lee, Kwang-Dae; Lee, Eui-Jong [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    A loose part monitoring system (LPMS) is included in the NSSS integrity monitoring system (NIMS), which serves to detect loose parts in reactor coolant systems (RCS). LPMSs at Nuclear Power Plants (NPPs) in Korea follow the ASME OM standard and acquire data from 18 sensors simultaneously. Data acquisition requires a sampling rate of more than 50KHz along with a 12bit A/D converter. Existing LPMS equipment is composed of several different platforms, such as a digital signal processor (DSP), a field-programmable gate array (FPGA), a micro control unit (MCU), and electric circuit cards. These systems have vulnerabilities, such as discontinuance due to aging and incompatibility issues between different pieces of equipment. This paper suggests CompactRIO as a new platform. We devised a Test-bed using CompactRIO and demonstrate that the proposed method meets the criteria required by the standard. The LPMS provides an alert when an impact event occurs and provides information with which to analyze the location, energy, and mass of the loose parts. LPMSs in NPPs in Korea operate on a variety of platforms. Thus, these systems are vulnerable to discontinuances due to aging and incompatibilities arising from the use of different type of equipment. In order to solve these problems, this paper suggests CompactRIO as a new platform. It is a rugged, reconfigurable, high-performance industrial embedded system. The results of performance tests meet the criteria set by the current standard.

  12. Acupuncture Effect on Pain, Mouth Opening Limitation and on the Energy Meridians in Patients with Temporomandibular Dysfunction: A Randomized Controlled Trial

    Vera LR. Zotelli

    2017-10-01

    Full Text Available Temporomandibular disorders (TMD, recognized as the most common conditions of chronic orofacial pain, have a multifactorial etiology. Acupuncture can help to relieve the pain and discomfort associated with these conditions, because it can rebalance the energy (Qi circulating in the meridians. The aim of the study was to verify the effectiveness of acupuncture in treating the pain; mouth opening limitation, and energy circulating in the meridians of patients with TMD of muscular or mixed origin. This was a controlled, randomized, double-blind clinical trial conducted at the Piracicaba Dental School (FOP/Unicamp, in Piracicaba SP, Brazil. The Treatment Group received acupuncture with real penetration of the needle, and the Placebo Group received a sham treatment without needle penetration. The acupoints used were: ST6, ST7, SI18, GV20, GB20, BL10, and LI4, during treatment performed for four weekly sessions. The TMD and mouth opening were evaluated according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC. The measurements of the energy at the meridians were performed by the Ryodoraku method, before and after acupuncture in all of the sessions in both groups. The results showed no decrease in pain in the Treatment Group when compared with the Placebo Group (p = 0.2261. There was no increase in the oral opening limit in the Treatment Group compared with the Placebo Group (p > 0.05. Regarding the energy levels, after acupuncture, there was a decrease in Yang energy in all sessions (p < 0.05, in both groups, however, only real acupuncture was effective in maintaining the Yin energy average throughout the four sessions, with significant difference between groups (p = 0.0198. In conclusion, volunteers with TMD presented a pattern of energy deficiency and the most prevalent imbalance patterns identified were in the meridians coupled to the kidney and bladder, and in the Shao Yin (heart/kidney and Shao Yang (triple

  13. Consultative Committee for Space Data Systems recommendation for space data system standards: Telecommand. Part 2.1: Command operation procedures

    1991-01-01

    This recommendation contains the detailed specification of the logic required to carry out the Command Operations Procedures of the Transfer Layer. The Recommendation for Telecommand--Part 2, Data Routing Service contains the standard data structures and data communication procedures used by the intermediate telecommand system layers (the Transfer and Segmentation Layers). In particular, it contains a brief description of the Command Operations Procedures (COP) within the Transfer Layer. This recommendation contains the detailed definition of the COP's in the form of state tables, along with definitions of the terms used. It is assumed that the reader of this document is familiar with the data structures and terminology of part 2. In case of conflict between the description of the COP's in part 2 and in this recommendation, the definition in this recommendation will take precedence. In particular, this document supersedes section 4.3.3.1 through 4.3.3.4 of part 2.

  14. Research on the proficient machine system. Theoretical part; Jukutatsu machine system no chosa kenkyu. Rironhen

    NONE

    1996-03-01

    The basic theory of the proficient machine system to be developed was studied. Important proficient techniques in manufacturing industries are becoming extinct because of insufficient succession to next generation. The proficient machine system was proposed to cope with such situation. This machine system includes the mechanism for progress and evolution of techniques and sensibilities to be adaptable to environmental changes by learning and recognizing various motions such as work and process. Consequently, the basic research fields are composed of thought, learning, perception and action. This machine requires not only deigned fixed functions but also introduction of the same proficient concept as human being to be adaptable to changes in situation, purpose, time and machine`s complexity. This report explains in detail the basic concept, system principle, approaching procedure and practical elemental technologies of the proficient machine system, and also describes the future prospect. 133 refs., 110 figs., 7 tabs.

  15. A review of heat pump drying: Part 1 - systems, models and studies

    Colak, Neslihan [Dept. of Food Engineering, Faculty of Engineering, Pamukkale Univ., 20070 Denizli (Turkey); Hepbasli, Arif [Dept. of Mechanical Engineering, Faculty of Engineering, Ege Univ., 35100 Bornova, Izmir (Turkey)

    2009-09-15

    The first heat pump dryer (HPD) patent applications were started in 1973, while recently, there has been a great interest in utilizing HPDs for drying fruits, vegetables and biological materials. This study deals with reviewing heat pump drying studies and consists of two parts. In the first part of this study, historical development of HPDs was briefly given first. Description of these systems was then presented. Finally, studies conducted on HPD were reviewed in terms of process efficiency modeling and progress of quality. (author)

  16. Investigation of novel propulsion systems – the exoskeletal engine concept. Part I

    Iulian JUHASZ

    2010-09-01

    Full Text Available The exoskeletal engine represents a relatively new concept in the world of propulsion systems. It is a drum-rotor engine concept in which conventionally heavy shafts and discs are eliminated and replaced by rotating casings that support the blades in span wise compression. Thus the rotating blades are in compression rather than in tension. The resulting open channel at the engine centreline has an immense potential for the jet noise reduction and can also accommodate an inner combined-cycle thruster such as a ramjet. This is the first part of an article constituted out of two parts.

  17. DEVELOPMENT OF THE AUTOMATED ROAD TRAFFIC CONTROL SYSTEMS IN MINSK AS PART OF THE INTELLECTUAL CITY TRANSPORT SYSTEM

    D. V. Kapskiy

    2017-01-01

    Full Text Available The results of the analysis of Minsk city transport system performance. It is shown that the growth of car ownership has caused a number of problems, among which the low-speed communication, bad driving modes, the presence of elevated levels of congestion and accidents. The corresponding figures for accidents in Minsk and some cities in the world that allow to characterize the transport system of the city of Minsk, as satisfactory. To improve the system and improve the quality of traffic necessary to create intelligent transport system of the city of Minsk. Intelligent Transportation System, being a global trend, enables dramatically improve road quality. Automated traffic control system and other subsystems as part of the Intelligent Transportation Systems are tools for achieving the goals for improving the safety and comfort of road users. It is proposed as a base for its creation to choose an automated traffic control system, which has a corresponding functional, structural, organizational and institutional provisions for its development. The technological requirements for the functioning of an integrated system, which relate to the level of efficiency, including accidents on sections of the road network included in the created system. Modernization of the automated traffic control system and its transformation into an intelligent transport system will reduce emergency, economic and environmental, and social costs in the road traffic is not less than 15 % from their current level, despite the steady growth of car ownership in the city. It is planned to create a complete intelligent transportation system.

  18. A case study of packaging waste collection systems in Portugal - Part II: Environmental and economic analysis.

    Pires, Ana; Sargedas, João; Miguel, Mécia; Pina, Joaquim; Martinho, Graça

    2017-03-01

    An understanding of the environmental impacts and costs related to waste collection is needed to ensure that existing waste collection schemes are the most appropriate with regard to both environment and cost. This paper is Part II of a three-part study of a mixed packaging waste collection system (curbside plus bring collection). Here, the mixed collection system is compared to an exclusive curbside system and an exclusive bring system. The scenarios were assessed using life cycle assessment and an assessment of costs to the waste management company. The analysis focuses on the collection itself so as to be relevant to waste managers and decision-makers who are involved only in this step of the packaging life cycle. The results show that the bring system has lower environmental impacts and lower economic costs, and is capable of reducing the environmental impacts of the mixed system. However, a sensitivity analysis shows that these results could differ if the curbside collection were to be optimized. From economic and environmental perspectives, the mixed system has few advantages. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Advanced Power Electronic Interfaces for Distributed Energy Systems Part 1: Systems and Topologies

    Kramer, W.; Chakraborty, S.; Kroposki, B.; Thomas, H.

    2008-03-01

    This report summarizes power electronic interfaces for DE applications and the topologies needed for advanced power electronic interfaces. It focuses on photovoltaic, wind, microturbine, fuel cell, internal combustion engine, battery storage, and flywheel storage systems.

  20. Instability of automotive air conditioning system with a variable displacement compressor. Part 1. Experimental investigation

    Tian, Changqing; Dou, Chunpeng; Yang, Xinjiang; Li, Xianting [Department of Building Science, School of Architecture, Tsinghua University, Beijing 100084 (People' s Republic of China)

    2005-11-01

    A test system is built first in order to investigate the instability of the automotive air conditioning (AAC) system with a variable displacement compressor (VDC), and hunting phenomena caused by the large external disturbance in the AAC system with a VDC and a thermal expansion valve, and in the AAC system with a VDC and a fixed-area throttling device are investigated experimentally in part 1 of this paper. The experimental results indicate that there also exist the hunting phenomena in the AAC system with a fixed-area throttling device. The system stability is found to be dependent on the direction of the external disturbance, and the system is apt to cause hunting when the condensing pressure decreases excessively since it may cause two-phase state at the throttling device inlet and make a large disturbance to the system. The piston stroke length will oscillate only when the oscillation amplitudes of forces acting on the wobble plate are great enough, otherwise the piston stroke length will be kept invariable, and then the system instability rule is also suitable for the AAC system with a fixed displacement compressor. From the experimental results, it is concluded that the two-phase flow at the throttling device inlet or at the evaporator outlet is the necessary condition but not sufficient condition for system hunting. Finally, a new concept, conservative stable region, is proposed based on the experimental results and theoretical analysis. (author)

  1. Trends in Energy Management Technology - Part 3: State of Practiceof Energy Management, Control, and Information Systems

    Yee, Gaymond; Webster, Tom

    2004-02-01

    In this report, the third in a series, we provide an evaluation of several products that exemplify the current state of practice of Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the federal sector. The first report [1] covered enabling technologies for emerging energy management systems. The second report [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. Part 4 of this series will discuss applications software from a user's perspective. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of reports provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

  2. Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

    Hanley, G. M.

    1980-01-01

    The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

  3. Four-part choral synthesis system for investigating intonation in a cappella choral singing.

    Howard, David M; Daffern, Helena; Brereton, Jude

    2013-10-01

    Accurate tuning is an important aspect of singing in harmony in the context of a choir or vocal ensemble. Tuning and 'pitch drift' are concerning factors in performance for even the most accomplished professional choirs when singing a cappella (unaccompanied). In less experienced choirs tuning often lacks precision, typically because individual singers have not developed appropriate listening skills. In order to investigate accuracy of tuning in ensemble singing situations, a chorally appropriate reference is required against which frequency measurements can be made. Since most basic choral singing involves chords in four parts, a four-part reference template is used in which the fundamental frequencies of the notes in each chord can be accurately set. This template can now be used in experiments where three of the reference parts are tuned in any musical temperament (tuning system), in this case equal and just temperaments, and played over headphones to a singer to allow her/his tuning strategy to be investigated. This paper describes a practical implementation of a four-part choral synthesis system in Pure Data (Pd) and its use in an investigation of tuning of notes by individual singers using an exercise originally written to explore pitch drift in a cappella choral singing.

  4. Markov chain-based mass estimation method for loose part monitoring system and its performance

    Sung-Hwan Shin

    2017-10-01

    Full Text Available A loose part monitoring system is used to identify unexpected loose parts in a nuclear reactor vessel or steam generator. It is still necessary for the mass estimation of loose parts, one function of a loose part monitoring system, to develop a new method due to the high estimation error of conventional methods such as Hertz's impact theory and the frequency ratio method. The purpose of this study is to propose a mass estimation method using a Markov decision process and compare its performance with a method using an artificial neural network model proposed in a previous study. First, how to extract feature vectors using discrete cosine transform was explained. Second, Markov chains were designed with codebooks obtained from the feature vector. A 1/8-scaled mockup of the reactor vessel for OPR1000 was employed, and all used signals were obtained by impacting its surface with several solid spherical masses. Next, the performance of mass estimation by the proposed Markov model was compared with that of the artificial neural network model. Finally, it was investigated that the proposed Markov model had matching error below 20% in mass estimation. That was a similar performance to the method using an artificial neural network model and considerably improved in comparison with the conventional methods.

  5. State space model extraction of thermohydraulic systemsPart I: A linear graph approach

    Uren, K.R.; Schoor, G. van

    2013-01-01

    Thermohydraulic simulation codes are increasingly making use of graphical design interfaces. The user can quickly and easily design a thermohydraulic system by placing symbols on the screen resembling system components. These components can then be connected to form a system representation. Such system models may then be used to obtain detailed simulations of the physical system. Usually this kind of simulation models are too complex and not ideal for control system design. Therefore, a need exists for automated techniques to extract lumped parameter models useful for control system design. The goal of this first paper, in a two part series, is to propose a method that utilises a graphical representation of a thermohydraulic system, and a lumped parameter modelling approach, to extract state space models. In this methodology each physical domain of the thermohydraulic system is represented by a linear graph. These linear graphs capture the interaction between all components within and across energy domains – hydraulic, thermal and mechanical. These linear graphs are analysed using a graph-theoretic approach to derive reduced order state space models. These models capture the dominant dynamics of the thermohydraulic system and are ideal for control system design purposes. The proposed state space model extraction method is demonstrated by considering a U-tube system. A non-linear state space model is extracted representing both the hydraulic and thermal domain dynamics of the system. The simulated state space model is compared with a Flownex ® model of the U-tube. Flownex ® is a validated systems thermal-fluid simulation software package. - Highlights: • A state space model extraction methodology based on graph-theoretic concepts. • An energy-based approach to consider multi-domain systems in a common framework. • Allow extraction of transparent (white-box) state space models automatically. • Reduced order models containing only independent state

  6. The camera of the fifth H.E.S.S. telescope. Part I: System description

    Bolmont, J., E-mail: bolmont@in2p3.fr [LPNHE, Université Pierre et Marie Curie Paris 6, Université Denis Diderot Paris 7, CNRS/IN2P3, 4 Place Jussieu, F-75252 Paris Cedex 5 (France); Corona, P.; Gauron, P.; Ghislain, P.; Goffin, C.; Guevara Riveros, L.; Huppert, J.-F.; Martineau-Huynh, O.; Nayman, P.; Parraud, J.-M.; Tavernet, J.-P.; Toussenel, F.; Vincent, D.; Vincent, P. [LPNHE, Université Pierre et Marie Curie Paris 6, Université Denis Diderot Paris 7, CNRS/IN2P3, 4 Place Jussieu, F-75252 Paris Cedex 5 (France); Bertoli, W.; Espigat, P.; Punch, M. [APC, AstroParticule et Cosmologie, Université Paris Diderot, CNRS/IN2P3, CEA/Irfu, Observatoire de Paris, Sorbonne Paris Cité, 10, rue Alice Domon et Léonie Duquet, F-75205 Paris Cedex 13 (France); Besin, D.; Delagnes, E.; Glicenstein, J.-F. [CEA Saclay, DSM/IRFU, F-91191 Gif-Sur-Yvette Cedex (France); and others

    2014-10-11

    In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S. (High Energy Stereoscopic System) array reached their tenth year of operation in Khomas Highlands, Namibia, a fifth telescope took its first data as part of the system. This new Cherenkov detector, comprising a 614.5 m{sup 2} reflector with a highly pixelized camera in its focal plane, improves the sensitivity of the current array by a factor two and extends its energy domain down to a few tens of GeV. The present part I of the paper gives a detailed description of the fifth H.E.S.S. telescope's camera, presenting the details of both the hardware and the software, emphasizing the main improvements as compared to previous H.E.S.S. camera technology.

  7. Evaluation of a computer aided X-ray fluorographic system: part 1 - system analysis

    Burch, S.F.; Cocking, S.J.

    1982-02-01

    A computer aided, X-ray fluorographic (CAF) system has been assembled for application in non-destructive testing. The fluorographic hardware comprises a rare earth phosphor viewed with a low-light level SIT (Silicon intensifier target) TV camera, suitable for real time imaging in an industrial environment. A digital image processor allows integration to reduce noise and hence increase the thickness sensitivity. It also provides image modification for optimum visual detection of defects. Measurements of the resolution of the system and the noise on the fluorographic images are presented. Observations of wire type IQIs gave subjective thickness sensitivities of 2 to 4% for steel specimens up to 9mm thick. The observed noise was caused primarily by the camera rather than by the fundamental limit expected from X-ray photon statistics. The present system has, in practical applications, shown a capability to detect small (0.5mm) volumetric defects in castings. Further developments of the system are also discussed. It is concluded that a micro-focus X-ray set should be used with the existing hardware to investigate projection magnification fluoroscopy. (author)

  8. A fully automated fast analysis system for capillary gas chromatography. Part 1. Automation of system control

    Snijders, H.M.J.; Rijks, J.P.E.M.; Bombeeck, A.J.; Rijks, J.A.; Sandra, P.; Lee, M.L.

    1992-01-01

    This paper is dealing with the design, the automation and evaluation of a high speed capillary gas chromatographic system. A combination of software and hardware was developed for a new cold trap/reinjection device that allows selective solvent eliminating and on column sample enrichment and an

  9. Investigation of Acupuncture Sensation Patterns under Sensory Deprivation Using a Geographic Information System

    Beissner, Florian; Marzolff, Irene

    2012-01-01

    The study of acupuncture-related sensations, like deqi and propagated sensations along channels (PSCs), has a long tradition in acupuncture basic research. The phenomenon itself, however, remains poorly understood. To study the connection between PSC and classical meridians, we applied a geographic information system (GIS) to analyze sketches of acupuncture sensations from healthy volunteers after laser acupuncture. As PSC can be subtle, we aimed at reducing the confounding impact of external stimuli by carrying out the experiment in a floatation tank under restricted environmental stimulation. 82.4% of the subjects experienced PSC, that is, they had line-like or 2-dimensional sensations, although there were some doubts that these were related to the laser stimulation. Line-like sensations on the same limb were averaged to calculate sensation mean courses, which were then compared to classical meridians by measuring the mean distance between the two. Distances ranged from 0.83 cm in the case of the heart (HT) and spleen (SP) meridian to 6.27 cm in the case of the kidney (KI) meridian. Furthermore, PSC was observed to “jump” between adjacent meridians. In summary, GIS has proven to be a valuable tool to study PSC, and our results suggest a close connection between PSC and classical meridians. PMID:23243458

  10. Environmental systems analysis of biogas systems-Part I: Fuel-cycle emissions

    Boerjesson, Pal; Berglund, Maria

    2006-01-01

    Fuel-cycle emissions of carbon dioxide (CO 2 ), carbon oxide (CO), nitrogen oxides (NO x ), sulphur dioxide (SO 2 ), hydrocarbons (HC), methane (CH 4 ), and particles are analysed from a life-cycle perspective for different biogas systems based on six different raw materials. The gas is produced in large- or farm-scale biogas plants, and is used in boilers for heat production, in turbines for co-generation of heat and electricity, or as a transportation fuel in light- and heavy-duty vehicles. The analyses refer mainly to Swedish conditions. The levels of fuel-cycle emissions vary greatly among the biogas systems studied, and are significantly affected by the properties of the raw material digested, the energy efficiency of the biogas production, and the status of the end-use technology. For example, fuel-cycle emission may vary by a factor of 3-4, and for certain gases by up to a factor of 11, between two biogas systems that provide an equivalent energy service. Extensive handling of raw materials, e.g. ley cropping or collection of waste-products such as municipal organic waste, is often a significant source of emissions. Emission from the production phase of the biogas exceeds the end-use emissions for several biogas systems and for specific emissions. Uncontrolled losses of methane, e.g. leakages from stored digestates or from biogas upgrading, increase the fuel-cycle emissions of methane considerably. Thus, it is necessary to clearly specify the biogas production system and end-use technology being studied in order to be able to produce reliable and accurate data on fuel-cycle emission

  11. System for verifiable CT radiation dose optimization based on image quality. part II. process control system.

    Larson, David B; Malarik, Remo J; Hall, Seth M; Podberesky, Daniel J

    2013-10-01

    To evaluate the effect of an automated computed tomography (CT) radiation dose optimization and process control system on the consistency of estimated image noise and size-specific dose estimates (SSDEs) of radiation in CT examinations of the chest, abdomen, and pelvis. This quality improvement project was determined not to constitute human subject research. An automated system was developed to analyze each examination immediately after completion, and to report individual axial-image-level and study-level summary data for patient size, image noise, and SSDE. The system acquired data for 4 months beginning October 1, 2011. Protocol changes were made by using parameters recommended by the prediction application, and 3 months of additional data were acquired. Preimplementation and postimplementation mean image noise and SSDE were compared by using unpaired t tests and F tests. Common-cause variation was differentiated from special-cause variation by using a statistical process control individual chart. A total of 817 CT examinations, 490 acquired before and 327 acquired after the initial protocol changes, were included in the study. Mean patient age and water-equivalent diameter were 12.0 years and 23.0 cm, respectively. The difference between actual and target noise increased from -1.4 to 0.3 HU (P process control chart identified several special causes of variation. Implementation of an automated CT radiation dose optimization system led to verifiable simultaneous decrease in image noise variation and SSDE. The automated nature of the system provides the opportunity for consistent CT radiation dose optimization on a broad scale. © RSNA, 2013.

  12. 32 CFR Appendix F to Part 505 - Example of a System of Records Notice

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Example of a System of Records Notice F Appendix... AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. F Appendix F to Part 505—Example of a... number, for example, A0025-55, where “A” indicates “Army,” the next number represents the publication...

  13. Burnout in boiling heat transfer. Part III. High-quality forced-convection systems

    Bergles, A.E.

    1979-01-01

    This is the final part of a review of burnout during boiling heat transfer. The status of burnout in high-quality forced-convection systems is reviewed, and recent developments are summarized in detail. A general guide to the considerable literature is given. Parametric effects and correlations for water in circular and noncircular ducts are presented. Other topics discussed include transients, steam-generator applications, correlations for other fluids, fouling, and augmentation

  14. Verification and validation as an integral part of the development of digital systems for nuclear applications

    Straker, E.A.; Thomas, N.C.

    1983-01-01

    The nuclear industry's current attitude toward verification and validation (V and V) is realized through the experiences gained to date. On the basis of these experiences, V and V can effectively be applied as an integral part of digital system development for nuclear electric power applications. An overview of a typical approach for integrating V and V with system development is presented. This approach represents a balance between V and V as applied in the aerospace industry and the standard practice commonly applied within the nuclear industry today

  15. DOE/NASA SIMS Prototype Solar System, no. 4. Part 1: Market analysis. Part 2: Modular manufacturing cost estimate

    1979-01-01

    The findings of the IIT Research Institute (IITRI) market study of the SIMS Prototype System 4, a hot water (DHW) system are documented. The feasibility of prepackaging currently available solar heating components into modular subsystems for site assembly is addressed. A documented design and installation procedure and a performance test report were prepared. The potential markets and applications for this particular system in the nonfederal market are profiled by assessing the needs and requirements of potential users and specifiers, by characterizing the nature of the market and the competitive environment, by identifying the barriers to commercial acceptance, and by estimating the size of the potential market.

  16. Route planning module as a part of Supply Chain Management system

    Michal Košíček

    2012-01-01

    Full Text Available Today, the demand for creating a systematic approach for managing sales, ordering, and logistics has increased. Supply Chain Management (SCM is one of the responses to problems that have arose with the need for managing complex supply chains. Nowadays, most of the activities of Supply Chain Management is realized or supported with computing technologies. Route planning is an important part of Supply Chain Management related to both procurement and distribution. Route planning systems specify the sequences in which the selected transport vehicles should supply the demand points by requested quantities of goods at the right time. The paper is focused on the analysis of a route planning system which could be used as a part of Supply Chain Management information system or as a standalone application. It describes basic techniques and frameworks of transportation problems as well as important functional requirements, considering recent trends in the field of distribution planning. As a result, functional specification of basic features and other components of system are provided. The paper is a result of a joint initiative of the authors and a vendor of business information systems.

  17. Theory and applications for optimization of every part of a photovoltaic system

    Redfield, D.

    1978-01-01

    A general method is presented for quantitatively optimizing the design of every part and fabrication step of an entire photovoltaic system, based on the criterion of minimum cost/Watt for the system output power. It is shown that no element or process step can be optimized properly by considering only its own cost and performance. Moreover, a fractional performance loss at any fabrication step within the cell or array produces the same fractional increase in the cost/Watt of the entire array, but not of the full system. One general equation is found to be capable of optimizing all parts of a system, although the cell and array steps are basically different from the power-handling elements. Applications of this analysis are given to show (1) when Si wafers should be cut to increase their packing fraction; and (2) what the optimum dimensions for solar cell metallizations are. The optimum shadow fraction of the fine grid is shown to be independent of metal cost and resistivity as well as cell size. The optimum thicknesses of both the fine grid and the bus bar are substantially greater than the values in general use, and the total array cost has a major effect on these values. By analogy, this analysis is adaptable to other solar energy systems.

  18. Wireless Power Transfer System for Rotary Parts Telemetry of Gas Turbine Engine

    Xiaoming He

    2018-04-01

    Full Text Available A novel wireless power transfer approach for the rotary parts telemetry of a gas turbine engine is proposed. The advantages of a wireless power transfer (WPT system in the power supply for the rotary parts telemetry of a gas turbine engine are introduced. By simplifying the circuit of the inductively-coupled WPT system and developing its equivalent circuit model, the mathematical expressions of transfer efficiency and transfer power of the system are derived. A mutual inductance model between receiving and transmitting coils of the WPT system is presented and studied. According to this model, the mutual inductance between the receiving and the transmitting coils can be calculated at different axial distances. Then, the transfer efficiency and transfer power can be calculated as well. Based on the test data, the relationship of the different distances between the two coils, the transfer efficiency, and transfer power is derived. The proper positions where the receiving and transmitting coils are installed in a gas turbine engine are determined under conditions of satisfying the transfer efficiency and transfer power that the telemetry system required.

  19. Modeling Multibody Systems with Uncertainties. Part I: Theoretical and Computational Aspects

    Sandu, Adrian; Sandu, Corina; Ahmadian, Mehdi

    2006-01-01

    This study explores the use of generalized polynomial chaos theory for modeling complex nonlinear multibody dynamic systems in the presence of parametric and external uncertainty. The polynomial chaos framework has been chosen because it offers an efficient computational approach for the large, nonlinear multibody models of engineering systems of interest, where the number of uncertain parameters is relatively small, while the magnitude of uncertainties can be very large (e.g., vehicle-soil interaction). The proposed methodology allows the quantification of uncertainty distributions in both time and frequency domains, and enables the simulations of multibody systems to produce results with 'error bars'. The first part of this study presents the theoretical and computational aspects of the polynomial chaos methodology. Both unconstrained and constrained formulations of multibody dynamics are considered. Direct stochastic collocation is proposed as less expensive alternative to the traditional Galerkin approach. It is established that stochastic collocation is equivalent to a stochastic response surface approach. We show that multi-dimensional basis functions are constructed as tensor products of one-dimensional basis functions and discuss the treatment of polynomial and trigonometric nonlinearities. Parametric uncertainties are modeled by finite-support probability densities. Stochastic forcings are discretized using truncated Karhunen-Loeve expansions. The companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part II: Numerical Applications' illustrates the use of the proposed methodology on a selected set of test problems. The overall conclusion is that despite its limitations, polynomial chaos is a powerful approach for the simulation of multibody systems with uncertainties

  20. Nanoparticles and the blood coagulation system. Part I: benefits of nanotechnology.

    Ilinskaya, Anna N; Dobrovolskaia, Marina A

    2013-05-01

    Nanotechnology is proven to provide certain benefits in drug delivery by improving solubility, increasing uptake to target sites and changing pharmacokinetics profiles of traditional drugs. Since properties of many materials change tremendously at the nanoscale levels, nanotechnology is also being explored in various industrial applications. As such, nanoparticles are rapidly entering various areas of industry, biology and medicine. The benefits of using nanotechnology for industrial and biomedical applications are often tempered by concerns about the safety of these new materials. One such area of concern includes their effect on the immune system. While nanoparticle interactions with various constituents of the immune system have been reviewed before, little attention was given to nanoparticle effects on the blood coagulation system. Nanoparticle interface with the blood coagulation system may lead to either benefits to the host or adverse reactions. This article reviews recent advances in our understanding of nanoparticle interactions with plasma coagulation factors, platelets, endothelial cells and leukocytes. Part I is focused on desirable interactions between nanoparticles and the coagulation system, and discusses benefits of using nanotechnology to intervene in coagulation disorders. Undesirable interactions posing safety concerns are covered in part II, which will be published in the June issue of Nanomedicine.

  1. Human Factors and Data Fusion as Part of Control Systems Resilience

    David I. Gertman

    2009-05-01

    Human performance and human decision making is counted upon as a crucial aspect of overall system resilience. Advanced control systems have the potential to provide operators and asset owners a wide range of data, deployed at different levels that can be used to support operator situation awareness. However, the sheer amount of data available can make it challenging for operators to assimilate information and respond appropriately. This paper reviews some of the challenges and issues associated with providing operators with actionable state awareness and argues for the over arching importance of integrating human factors as part of intelligent control systems design and implementation. It is argued that system resilience is improved by implementing human factors in operations and maintenance. This paper also introduces issues associated with resilience and data fusion and highlights areas in which human factors including field studies hold promise.

  2. Active materials for automotive adaptive forward lighting Part 1: system requirements vs. material properties

    Keefe, Andrew C.; Browne, Alan L.; Johnson, Nancy L.

    2011-04-01

    Adaptive Frontlighting Systems (AFS in GM usage) improve visibility by automatically optimizing the beam pattern to accommodate road, driving and environmental conditions. By moving, modifying, and/or adding light during nighttime, inclement weather, or in sharp turns, the driver is presented with dynamic illumination not possible with static lighting systems The objective of this GM-HRL collaborative research project was to assess the potential of active materials to decrease the cost, mass, and packaging volume of current electric stepper-motor AFS designs. Solid-state active material actuators, if proved suitable for this application, could be less expensive than electric motors and have lower part count, reduced size and weight, and lower acoustic and EMF noise1. This paper documents Part 1 of the collaborative study, assessing technically mature, commercially available active materials for use as actuators. Candidate materials should reduce cost and improve AFS capabilities, such as increased angular velocity on swivel. Additional benefits to AFS resulting from active materials actuators were to be identified as well such as lower part count. In addition, several notional approaches to AFS were documented to illustrate the potential function, which is developed more fully in Part 2. Part 1 was successful in verifying the feasibility of using two active materials for AFS: shape memory alloys, and piezoelectrics. In particular, this demonstration showed that all application requirements including those on actuation speed, force, and cyclic stability to effect manipulation of the filament assembly and/or the reflector could be met by piezoelectrics (as ultrasonic motors) and SMA wire actuators.

  3. Licensing systems and inspection of nuclear installations in NEA Member countries. Part 1, Description of licensing systems

    1977-01-01

    This study provides an assessment of the legislative and regulatory provisions applicable and of the practices followed in the countries concerned and is divided into two separate sections. This document is the first part only. It contains the description of national licensing and inspection systems for nuclear installations in the twenty OECD countries which have specific regulations in this field. Each analysis has been presented following a plan which is as standardised as possible so as to facilitate comparison between the national systems. Part II, which is not included in this document, contains the diagrams illustrating the steps in the licensing procedure and the duties of the bodies involved as well as certain additional documents. It also includes a table showing the sequence of the main steps in the licensing process in the countries covered by this Study

  4. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

  5. A new system for sodium flux growth of bulk GaN. Part I: System development

    Von Dollen, Paul; Pimputkar, Siddha; Alreesh, Mohammed Abo; Albrithen, Hamad; Suihkonen, Sami; Nakamura, Shuji; Speck, James S.

    2016-12-01

    Though several methods exist to produce bulk crystals of gallium nitride (GaN), none have been commercialized on a large scale. The sodium flux method, which involves precipitation of GaN from a sodium-gallium melt supersaturated with nitrogen, offers potentially lower cost production due to relatively mild process conditions while maintaining high crystal quality. We successfully developed a novel apparatus for conducting crystal growth of bulk GaN using the sodium flux method which has advantages with respect to prior reports. A key task was to prevent sodium loss or migration from the growth environment while permitting N2 to access the growing crystal. We accomplished this by implementing a reflux condensing stem along with a reusable capsule containing a hermetic seal. The reflux condensing stem also enabled direct monitoring of the melt temperature, which has not been previously reported for the sodium flux method. Furthermore, we identified and utilized molybdenum and the molybdenum alloy TZM as a material capable of directly containing the corrosive sodium-gallium melt. This allowed implementation of a crucible-free system, which may improve process control and potentially lower crystal impurity levels. Nucleation and growth of parasitic GaN ("PolyGaN") on non-seed surfaces occurred in early designs. However, the addition of carbon in later designs suppressed PolyGaN formation and allowed growth of single crystal GaN. Growth rates for the (0001) Ga face (+c-plane) were up to 14 μm/h while X-ray omega rocking (ω-XRC) curve full width half-max values were 731″ for crystals grown using a later system design. Oxygen levels were high, >1019 atoms/cm3, possibly due to reactor cleaning and handling procedures.

  6. Functional consequences of structural differences in stingray sensory systems. Part I: mechanosensory lateral line canals.

    Jordan, Laura K; Kajiura, Stephen M; Gordon, Malcolm S

    2009-10-01

    Short range hydrodynamic and electrosensory signals are important during final stages of prey capture in elasmobranchs (sharks, skates and rays), and may be particularly useful for dorso-ventrally flattened batoids with mouths hidden from their eyes. In stingrays, both the lateral line canal and electrosensory systems are highly modified and complex with significant differences on ventral surfaces that relate to feeding ecology. This study tests functional hypotheses based on quantified differences in sensory system morphology of three stingray species, Urobatis halleri, Myliobatis californica and Pteroplatytrygon violacea. Part I investigates the mechanosensory lateral line canal system whereas part II focuses on the electrosensory system. Stingray lateral line canals include both pored and non-pored sections and differ in branching complexity and distribution. A greater proportion of pored canals and high pore numbers were predicted to correspond to increased response to water flow. Behavioral experiments were performed to compare responses of stingrays to weak water jets mimicking signals produced by potential prey at velocities of 10-20 cm s(-1). Bat rays, M. californica, have the most complex and broadly distributed pored canal network and demonstrated both the highest response rate and greater response intensity to water jet signals. Results suggest that U. halleri and P. violacea may rely on additional sensory input, including tactile and visual cues, respectively, to initiate stronger feeding responses. These results suggest that stingray lateral line canal morphology can indicate detection capabilities through responsiveness to weak water jets.

  7. System description and analysis. Part 1: Feasibility study for helicopter/VTOL wide-angle simulation image generation display system

    1977-01-01

    A preliminary design for a helicopter/VSTOL wide angle simulator image generation display system is studied. The visual system is to become part of a simulator capability to support Army aviation systems research and development within the near term. As required for the Army to simulate a wide range of aircraft characteristics, versatility and ease of changing cockpit configurations were primary considerations of the study. Due to the Army's interest in low altitude flight and descents into and landing in constrained areas, particular emphasis is given to wide field of view, resolution, brightness, contrast, and color. The visual display study includes a preliminary design, demonstrated feasibility of advanced concepts, and a plan for subsequent detail design and development. Analysis and tradeoff considerations for various visual system elements are outlined and discussed.

  8. AUTOMOTIVE DIESEL MAINTENANCE L. UNIT XII, PART I--MAINTAINING THE FUEL SYSTEM (PART II), CUMMINS DIESEL ENGINE, PART II--UNIT INSTALLATION (ENGINE).

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM AND THE PROCEDURES FOR DIESEL ENGINE INSTALLATION. TOPICS ARE FUEL FLOW CHARACTERISTICS, PTG FUEL PUMP, PREPARATION FOR INSTALLATION, AND INSTALLING ENGINE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH…

  9. AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XI, PART I--MAINTAINING THE FUEL SYSTEM (PART I), CUMMINS DIESEL ENGINES, PART II--UNIT REPLACEMENT (ENGINE).

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF DIFFERENCES BETWEEN TWO AND FOUR CYCLE ENGINES, THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM, AND THE PROCEDURES FOR DIESEL ENGINE REMOVAL. TOPICS ARE (1) REVIEW OF TWO CYCLE AND FOUR CYCLE CONCEPT, (2) SOME BASIC CHARACTERISTICS OF FOUR CYCLE ENGINES,…

  10. Moving-part-free microfluidic systems for lab-on-a-chip

    Luo, J K; Fu, Y Q; Du, X Y; Flewitt, A J; Milne, W I; Li, Y; Walton, A J

    2009-01-01

    Microfluidic systems are part of an emerging technology which deals with minute amounts of liquids (biological samples and reagents) on a small scale. They are fast, compact and can be made into a highly integrated system to deliver sample purification, separation, reaction, immobilization, labelling, as well as detection, thus are promising for applications such as lab-on-a-chip and handheld healthcare devices. Miniaturized micropumps typically consist of a moving-part component, such as a membrane structure, to deliver liquids, and are often unreliable, complicated in structure and difficult to be integrated with other control electronics circuits. The trend of new-generation micropumps is moving-part-free micropumps operated by advanced techniques, such as electrokinetic force, surface tension/energy, acoustic waves. This paper reviews the development and advances of relevant technologies, and introduces electrowetting-on-dielectrics and acoustic wave-based microfluidics. The programmable electrowetting micropump has been realized to dispense and manipulate droplets in 2D with up to 1000 addressable electrodes and electronics built underneath. The acoustic wave-based microfluidics can be used not only for pumping, mixing and droplet generation but also for biosensors, suitable for single-mechanism-based lab-on-a-chip applications

  11. Joint Thesaurus. Part I (A-L) + Part II (M-Z)[International Nuclear Information System. Energy Technology Data Exchange

    NONE

    2004-04-01

    This is the 1st revision of the INIS/ETDE Joint Thesaurus. It contains 20 953 valid descriptors and 8 600 forbidden terms. It was last updated in December 2003. The Joint Thesaurus contains the controlled terminology for indexing all information within the subject scope of both INIS (International Nuclear Information System) and ETDE (Energy Technology Data Exchange) information systems. The terminology is intended for use in subject description for input or retrieval of information in those systems. The thesaurus is a terminological control device used in translating from the natural language of documents, indexers or users into a more constrained system language It is also a controlled and dynamic vocabulary of semantically and generically related terms which covers a specific domain of knowledge. The domain of knowledge covered by this Thesaurus includes physics (in particular, plasma physics, atomic and molecular physics, and especially nuclear and high-energy physics), chemistry, materials, earth sciences, radiation biology, radioisotope effects and kinetics, applied life sciences, radiology and nuclear medicine, isotope and radiation source technology, radiation protection, radiation applications, engineering, instrumentation, fossil fuels, synthetic fuels, renewable energy sources, advanced energy systems, fission and fusion reactor technology, safeguards and inspection, waste management, environmental aspects of the production and consumption of energy from nuclear and non-nuclear sources, energy efficiency and energy conservation, economics and sociology of energy production and use, energy policy, and nuclear law. The terms in the Thesaurus are listed alphabetically, and with each alphabetic entry a word block containing the terms associated with the particular entry is displayed. In the word block, terms that have a hierarchical relationship to the entry are identified by the symbols BT and NT, for Broader Term and Narrower Term. Those with an affinitive

  12. Analysis of grid connected solar PV system in the Southeastern Part of Bangladesh

    Ariful Islam; Fatema Akther Shima; Akhera Khanam

    2013-01-01

    Bangladesh is a potential site of implementing renewable energy system to reduce the severe power crisis throughout the year. According to this, Chittagong is the southeastern part of Bangladesh is also a potential site for implementing renewable energy system such as grid-connected photovoltaic (PV) system. Financial viability and green-house gas emission reduction of solar PV as an electricity generation source are assessed for 500 kW grid connected solar PV system at University of Chittagong, Chittagong. Homer simulation soft-ware and monthly average solar radiation data from NASA is used for this task. In the proposed system monthly electricity generation varies between 82.65 MW h and 60.3 MW h throughout the year with a mean value of 68.25 MW h depending on the monthly highest and lowest solar radiation data. It is found that per unit electricity production cost is US$ 0.20 based on project lifetime 25 years. The IRR, equity payback and benefit-cost ratio shows favorable condition for development of the proposed solar PV system in this site. A minimum 664 tones of green-house gas emissions can be reduced annually utilizing the proposed system. (authors)

  13. Development of computer program for simulation of an ice bank system operation, Part I: Mathematical modelling

    Halasz, Boris; Grozdek, Marino; Soldo, Vladimir [Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 5, 10 000 Zagreb (Croatia)

    2009-09-15

    Since the use of standard engineering methods in the process of an ice bank performance evaluation offers neither adequate flexibility nor accuracy, the aim of this research was to provide a powerful tool for an industrial design of an ice storage system allowing to account for the various design parameters and system arrangements over a wide range of time varying operating conditions. In this paper the development of a computer application for the prediction of an ice bank system operation is presented. Static, indirect, cool thermal storage systems with external ice on coil building/melting were considered. The mathematical model was developed by means of energy and mass balance relations for each component of the system and is basically divided into two parts, the model of an ice storage system and the model of a refrigeration unit. Heat transfer processes in an ice silo were modelled by use of empirical correlations while the performance of refrigeration unit components were based on manufacturers data. Programming and application design were made in Fortran 95 language standard. Input of data is enabled through drop down menus and dialog boxes, while the results are presented via figures, diagrams and data (ASCII) files. In addition, to demonstrate the necessity for development of simulation program a case study was performed. Simulation results clearly indicate that no simple engineering methods or rule of thumb principles could be utilised in order to validate performance of an ice bank system properly. (author)

  14. THE USE OF PASSIVE SOLAR HEATING SYSTEMS AS PART OF THE PASSIVE HOUSE

    Bryzgalin Vladislav Viktorovich

    2018-05-01

    Full Text Available Subject: systems of passive solar heating, which can, without the use of engineering equipment, capture and accumulate the solar heat used for heating buildings. Research objectives: study of the possibility to reach the passive house standard (buildings with near zero energy consumption for heating in climatic conditions of Russia using the systems of passive solar heating in combination with other solutions for reduction of energy costs of building developed in the past. Materials and methods: search and analysis of literature, containing descriptions of various passive solar heating systems, examples of their use in different climatic conditions and the resulting effect obtained from their use; analysis of thermophysical processes occurring in these systems. Results: we revealed the potential of using the solar heating systems in the climatic conditions of parts of the territories of the Russian Federation, identified the possibility of cheaper construction by the passive house standard with the use of these systems. Conclusions: more detailed analysis of thermophysical and other processes that take place in passive solar heating systems is required for creation of their computational models, which will allow us to more accurately predict their effectiveness and seek the most cost-effective design solutions, and include them in the list of means for achieving the passive house standard.

  15. Arts and cultural activity: A vital part of the health and care system.

    Cann, Paul L

    2017-06-01

    This article discusses how the arts and cultural activities are a vital part of a health and care system and have potential to fulfil the theme of active ageing. The changing nature of care provision in response to demographic change, fiscal pressure and increasingly consumerist attitudes on the part of care users, is considered. Selected examples of how participation in arts and cultural activities increases not only well-being but also health outcomes are then outlined. The article highlights the potential of 'cultural commissioning' and within that 'arts on prescription' - public funding of arts-related activities for people with care needs - and advocates investment in arts and cultural activities to better meet the demands of health, social care and aged care. Concluding remarks are made, and a way forward is suggested. © 2017 AJA Inc.

  16. Literature study regarding fire protection in nuclear power plants. Part 2: Fire detection and -extinguishing systems

    Isaksson, S.

    1996-01-01

    This literature study has been made on behalf of the Swedish Nuclear Power Inspectorate. The aim is to describe different aspects of fire protection in nuclear power plants. Detection and extinguishing systems in Swedish nuclear power plants have only to a limited extent been designed after functional demands, such as a maximum acceptable damage or a maximum time to detect a fire. The availability of detection systems is difficult to assess, partly because of lack of statistics. The user interface is very important in complex systems as nuclear plants. An extinguishing system designed according to the insurance companies' regulations will only fulfill the basic demands. It should be noted that normal sprinkler design does not aim for extinguishing fires, the objective is to control fire until manual extinguishment is possible. There is a great amount of statistics on wet and dry pipe sprinkler systems, while statistics are more scarce for deluge systems. The statistics on the reliability of gaseous extinguishing systems have been found very scarce. A drawback of these systems is that they are normally designed for one shot only. There are both traditional and more recent extinguishing systems that can replace halons. From now on there will be a greater need for a thorough examination of the properties needed for the individual application and a quantification of the acceptable damage. There are several indications on the importance of a high quality maintenance program as well as carefully developed routines for testing and surveillance to ensure the reliability of detection and extinguishing systems. 78 refs, 8 figs, 10 tabs

  17. Groundwater recharge through wells in open loop geothermal system: problems and solutions - part 1

    Giovanni Pietro Beretta

    2017-07-01

    Full Text Available In the two parts of this article, the problems related to the management of water wells as part of a low-enthalpy geothermal power plant by means of heat pumps (open loop system are described. In many cases, in absence of discharge in surface water and/or to ensure the conservation of the resource from a quantitative point of view, a doublet system constituted by a pumping and a recharge well is provided. The clogging phenomenon often occurs in this kind of plant, affecting wells with different functions and different thermal potential related to water withdrawal and reinjection into the ground. This phenomenon is due to the presence of air bubbles, suspended solids, bacterial growth and to the chemical-physical reactions that are described in the text. Besides acknowledging the activities for recharge wells management to avoid the fracturing of the drain and the cementation, is also suggested the procedure of in situ tests that are used to properly determine the optimal well discharge, which determines the efficiency and effectiveness of the geothermal system and its economic performance.It is finally shown a regional regulation on the water quality used in an open loop.

  18. Delivery systems for biopharmaceuticals. Part II: Liposomes, Micelles, Microemulsions and Dendrimers.

    Silva, Ana C; Lopes, Carla M; Lobo, José M S; Amaral, Maria H

    2015-01-01

    Biopharmaceuticals are a generation of drugs that include peptides, proteins, nucleic acids and cell products. According to their particular molecular characteristics (e.g. high molecular size, susceptibility to enzymatic activity), these products present some limitations for administration and usually parenteral routes are the only option. To avoid these limitations, different colloidal carriers (e.g. liposomes, micelles, microemulsions and dendrimers) have been proposed to improve biopharmaceuticals delivery. Liposomes are promising drug delivery systems, despite some limitations have been reported (e.g. in vivo failure, poor long-term stability and low transfection efficiency), and only a limited number of formulations have reached the market. Micelles and microemulsions require more studies to exclude some of the observed drawbacks and guarantee their potential for use in clinic. According to their peculiar structures, dendrimers have been showing good results for nucleic acids delivery and a great development of these systems during next years is expected. This is the Part II of two review articles, which provides the state of the art of biopharmaceuticals delivery systems. Part II deals with liposomes, micelles, microemulsions and dendrimers.

  19. Waste Isolation Pilot Plant (WIPP) conceptual design report. Part I: executive summary. Part II: facilities and system

    1977-06-01

    The pilot plant is developed for ERDA low-level contact-handled transuranic waste, ERDA remote-handled intermediate-level transuranic waste, and for high-level waste experiments. All wastes placed in the WIPP arrive at the site processed and packaged; no waste processing is done at the WIPP. All wastes placed into the WIPP are retrievable. The proposed site for WIPP lies 26 miles east of Carlsbad, New Mexico. This document includes the executive summary and a detailed description of the facilities and systems

  20. Joint optimisation of spare part inventory, maintenance frequency and repair capacity for k-out-of-N systems

    de Smidt-Destombes, Karin S.; van der Heijden, Matthijs C.; van Harten, Aart

    2009-01-01

    To achieve a high system availability at minimal costs, relevant decisions include the choice of preventive maintenance frequency, spare part inventory levels and spare part repair capacity. We develop heuristics for the joint optimisation of these variables for (a) a single k-out-of-N system under

  1. 49 CFR Appendix H to Part 40 - DOT Drug and Alcohol Testing Management Information System (MIS) Data Collection Form

    2010-10-01

    ..., App. H Appendix H to Part 40—DOT Drug and Alcohol Testing Management Information System (MIS) Data... 49 Transportation 1 2010-10-01 2010-10-01 false DOT Drug and Alcohol Testing Management Information System (MIS) Data Collection Form H Appendix H to Part 40 Transportation Office of the Secretary...

  2. Small UAS-Based Wind Feature Identification System Part 1: Integration and Validation

    Leopoldo Rodriguez Salazar

    2016-12-01

    Full Text Available This paper presents a system for identification of wind features, such as gusts and wind shear. These are of particular interest in the context of energy-efficient navigation of Small Unmanned Aerial Systems (UAS. The proposed system generates real-time wind vector estimates and a novel algorithm to generate wind field predictions. Estimations are based on the integration of an off-the-shelf navigation system and airspeed readings in a so-called direct approach. Wind predictions use atmospheric models to characterize the wind field with different statistical analyses. During the prediction stage, the system is able to incorporate, in a big-data approach, wind measurements from previous flights in order to enhance the approximations. Wind estimates are classified and fitted into a Weibull probability density function. A Genetic Algorithm (GA is utilized to determine the shaping and scale parameters of the distribution, which are employed to determine the most probable wind speed at a certain position. The system uses this information to characterize a wind shear or a discrete gust and also utilizes a Gaussian Process regression to characterize continuous gusts. The knowledge of the wind features is crucial for computing energy-efficient trajectories with low cost and payload. Therefore, the system provides a solution that does not require any additional sensors. The system architecture presents a modular decentralized approach, in which the main parts of the system are separated in modules and the exchange of information is managed by a communication handler to enhance upgradeability and maintainability. Validation is done providing preliminary results of both simulations and Software-In-The-Loop testing. Telemetry data collected from real flights, performed in the Seville Metropolitan Area in Andalusia (Spain, was used for testing. Results show that wind estimation and predictions can be calculated at 1 Hz and a wind map can be updated at 0.4 Hz

  3. Utilizing product configuration systems for supporting the critical parts of the engineering processes

    Kristjansdottir, Katrin; Shafiee, Sara; Hvam, Lars

    2016-01-01

    Engineering-To-Order (ETO) companies have to respond to increasing demands to provide highly customized and complex products with high quality at competitive prices. In order to respond to those challenges ETO companies have started to implement product configuration systems (PCS) to increase...... to be supported with the PCSs is not described in the current literature. This paper aims to pursue that research opportunity by presenting a framework, which aims to identifying the critical parts of the engineering processes in order to identify where it most beneficial to implement a PCSs and how to prioritize...

  4. A Study of Future Communications Concepts and Technologies for the National Airspace System - Part IV

    Ponchak, Denise S.; Apaza, Rafael D.; Wichgers, Joel M.; Haynes, Brian; Roy, Aloke

    2015-01-01

    The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present the final results describing the communications challenges and opportunities that have been identified as part of the study.

  5. Investigation of novel propulsion systems – the exoskeletal engine concept. Part II

    Iulian JUHASZ

    2011-06-01

    Full Text Available The exoskeletal engine represents a relatively new concept in the world of propulsion systems. It is a drum-rotor engine concept in which conventionally heavy shafts and discs are eliminated and replaced by rotating casings that support the blades in span wise compression. Thus the rotating blades are in compression rather than in tension. The resulting open channel at the engine centerline has immense potential for jet noise reduction and can also accommodate an inner combined-cycle thruster such as a ramjet. This is the second part of the article.

  6. Radiation pre-vulcanization of transitional layer of all-steel load meridian tyre and performance tests of the tyre products

    Zhang Benshang; Zhu Chengshen; Ying Shizhou; Liu Kebo; Li Zhaopeng; Li Kunhao; Zhang Hongna; Zhao Meihong; Yang Mingcheng

    2012-01-01

    In this article, natural rubber is chosen as transitional layer of all-steel load meridian tyre, which is pre-vulcanized by 500 keV E-beam irradiation of up to 60 kGy. The results show that the Green strength of transitional layer increases with the dose, reaching four times at 60 kGy as much as the control (without irradiation). The viscosity of transitional layer increases rapidly below about 29 kGy, but changes little at higher doses. The final mechanical properties do not differ significantly from those of the control. However, thickness of the natural rubber transitional layer for an average single tire can be reduced by 1 mm (or 1.5 kg), without obvious adverse effect on the tyre performance. (authors)

  7. Increase of COP for heat transformer in water purification systems. Part I - Increasing heat source temperature

    Siqueiros, J.; Romero, R.J.

    2007-01-01

    The integration of a water purification system in a heat transformer allows a fraction of heat obtained by the heat transformer to be recycled, increasing the heat source temperature. Consequently, the evaporator and generator temperatures are also increased. For any operating conditions, keeping the condenser and absorber temperatures and also the heat load to the evaporator and generator, a higher value of COP is obtained when only the evaporator and generator temperatures are increased. Simulation with proven software compares the performance of the modeling of an absorption heat transformer for water purification (AHTWP) operating with water/lithium bromide, as the working fluid-absorbent pair. Plots of enthalpy-based coefficients of performance (COP ET ) and the increase in the coefficient of performance (COP) are shown against absorber temperature for several thermodynamic operating conditions. The results showed that proposed (AHTWP) system is capable of increasing the original value of COP ET more than 120%, by recycling part of the energy from a water purification system. The proposed system allows to increase COP values from any experimental data for water purification or any other distillation system integrated to a heat transformer, regardless of the actual COP value and any working fluid-absorbent pair

  8. Transactive System: Part I: Theoretical Underpinnings of Payoff Functions, Control Decisions, Information Privacy, and Solution Concepts

    Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Laurentiu D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2018-01-17

    new transactive energy system design with demonstrable guarantees on stability and performance. Specifically, the goals are to (1) establish a theoretical basis for evaluating the performance of different transactive systems, (2) devise tools to address canonical problems that exemplify challenges and scenarios of transactive systems, and (3) provide guidelines for design of future transactive systems. This report, Part 1 of a two part series, advances the above-listed research objectives by reviewing existing transactive systems and identifying a theoretical foundation that integrates payoff functions, control decisions, information privacy, and mathematical solution concepts.

  9. Lacrimal drainage-associated lymphoid tissue (LDALT): a part of the human mucosal immune system.

    Knop, E; Knop, N

    2001-03-01

    Mucosa-associated lymphoid tissue (MALT) specifically protects mucosal surfaces. In a previous study of the human conjunctiva, evidence was also found for the presence of MALT in the lacrimal sac. The present study, therefore, aims to investigate its morphology and topographical distribution in the human lacrimal drainage system. Lacrimal drainage systems (n = 51) obtained from human cadavers were investigated by clearing flat wholemounts or by serial sections of tissue embedded in paraffin, OCT compound, or epoxy resin. These were further analyzed by histology, immunohistochemistry, and electron microscopy. All specimens showed the presence of lymphocytes and plasma cells as a diffuse lymphoid tissue in the lamina propria, together with intraepithelial lymphocytes and occasional high endothelial venules (HEV). It formed a narrow layer along the canaliculi that became thicker in the cavernous parts. The majority of lymphocytes were T cells, whereas B cells were interspersed individually or formed follicular centers. T cells were positive for CD8 and the human mucosa lymphocyte antigen (HML-1). Most plasma cells were positive for IgA and the overlying epithelium expressed its transporter molecule secretory component (SC). Basal mucous glands were present in the lacrimal canaliculi and in the other parts accompanied by alveolar and acinar glands, all producing IgA-rich secretions. Primary and secondary lymphoid follicles possessing HEV were present in about half of the specimens. The term lacrimal drainage-associated lymphoid tissue (LDALT) is proposed here to describe the lymphoid tissue that is regularly present and belongs to the common mucosal immune system and to the secretory immune system. It is suggested that it may form a functional unit together with the lacrimal gland and conjunctiva, connected by tear flow, lymphocyte recirculation, and probably the neural reflex arc, and play a major role in preserving ocular surface integrity.

  10. Landscape Planning and Ecological Networks. Part A. A Rural System in Nuoro, Sardinia

    Andrea De Montis

    2014-05-01

    Full Text Available Urban-rural landscape planning research is nowadays focusing on strategies and tools that support practitioners in designing integrated spaces starting from the analysis of local areas, where human and natural pressures interfere. A prominent framework is provided by the ecological networks, whose design regards the combination of a set of green areas or patches (the nodes interconnected through environmental corridors (the edges. Ecological networks are useful for biodiversity protection and enhancement, as they are able to counteract fragmentation, and to create or strengthen relations and exchanges among otherwise isolated elements. Biodiversity evolution, indeed, depends on the quantity and quality of spatial cohesion of natural areas.  In this paper, we aim at designing an ecological network for the periurban area on the town of Nuoro in central Sardinia. The narrative unfolds in two parts. Part A is presented in this paper and includes its methodological premises, i.e. biodiversity conservation and ecological network analysis and design, and the introductory elements of a spatial analysis on a pilot ecological network of one hundred patches. We locate patches by focusing on the ecosystems supported by the target vegetal species holm oak (Quercus ilex and cultivated or wild olive (Olea europaea var. sativa, O. europaea var. sylverstis. These are very common plants species in the municipality and some animal species are active as seed dispersal. The reminder, i.e. Part B, of the essay is presented in an homonymous paper that focuses on the illustration of the network analysis conceived as a monitoring system and, in future perspective, as a planning support system.

  11. MACHINE LEARNING IMPLEMENTATION FOR THE CLASSIFICATION OF ATTACKS ON WEB SYSTEMS. PART 2

    K. Smirnova

    2017-11-01

    Full Text Available The possibility of applying machine learning for the classification of malicious requests to aWeb application is considered. This approach excludes the use of deterministic analysis systems (for example, expert systems,and is based on the application of a cascade of neural networks or perceptrons on an approximate model to the real humanbrain. The main idea of the work is to enable to describe complex attack vectors consisting of feature sets, abstract terms forcompiling a training sample, controlling the quality of recognition and classifying each of the layers (networks participatingin the work, with the ability to adjust not the entire network, but only a small part of it, in the training of which a mistake orinaccuracy crept in. The design of the developed network can be described as a cascaded, scalable neural network.When using neural networks to detect attacks on web systems, the issue of vectorization and normalization of features isacute. The most commonly used methods for solving these problems are not designed for the case of deliberate distortion ofthe signs of an attack.The proposed approach makes it possible to obtain a neural network that has been studied in more detail by small features,and also to eliminate the normalization issues in order to avoid deliberately bypassing the intrusion detection system. Byisolating one more group of neurons in the network and teaching it to samples containing various variants of circumvention ofthe attack classification, the developed intrusion detection system remains able to classify any types of attacks as well as theiraggregates, putting forward more stringent measures to counteract attacks. This allows you to follow the life cycle of theattack in more detail: from the starting trial attack to deliberate sophisticated attempts to bypass the system and introducemore decisive measures to actively counteract the attack, eliminating the chances of a false alarm system.

  12. Hydrochemical zonation of the western part of Göksu Delta aquifer system, Southern Turkey

    Dokuz, U. E.; Çelik, M.; Arslan, Ş.; Engin, H.

    2012-04-01

    In general, coastal areas are preferred places for human settlement, especially at places where infrastructure routes benefit from rivers, streets, or harbours. As a result, these areas usually suffer from rising population and endure increasingly high demand on natural resources like water. Göksu Delta, located in southern Turkey, is one of the important wetland areas of Turkey at the Mediterranean coast. It is divided into two parts by Göksu River. The western part of the delta, which is the subject matter of this study, hosts fertile agricultural fields, touristic places and a Special Environmental Protection Area. These properties of the region lead to a water-dependent ecosystem where groundwater has widely been used for agricultural and domestic purposes. When the exploitation of groundwater peaked in the middle of 1990s, the groundwater levels dropped and seawater intruded. General Directorate of State Hydraulic Works tried to stop seawater intrusion by building irrigation channels connected to Göksu River and banned drilling of new wells for groundwater exploitation, although it is hard to control the drilling of wells without official permit. Geological studies show that the delta is composed of terrestrial sediments including clay to coarse sand deposited during Quaternary. The heterogeneous sediments of Göksu Delta cause hydrogeological features of the aquifer systems to be heterogeneous and anisotropic. Hydrogeological investigations, therefore, indicate mainly two different aquifers, shallow and deep, separated by an aquitard. The shallow aquifer is under unconfined to confined conditions from north to south while the deep aquifer is under confined conditions. This study focuses on hydrogeochemical zonation in terms of hydrochemical processes that affect the Göksu Delta aquifer systems. For this purpose, hydrogeochemical and isotopic studies are conducted to understand the salinisation and softening processes of groundwater. The physicochemical

  13. Lapabot: a compact telesurgical robot system for minimally invasive surgery: part II. Telesurgery evaluation.

    Park, Jun Woo; Lee, Duck Hee; Kim, Young Woo; Lee, Byeong Han; Jo, Yung Ho

    2012-05-01

    As described in Part I, the Lapabot was developed considering telesurgery from the initial design stage. The robot configuration is based on the master-slave structure in which the operator can be separated spatially from the patient. The distributed control architecture communicating through high-speed network enables remote control of surgical robot manipulators. In this work, we added network communication modules using user datagram protocol/internet protocol for implementation of the telesurgical system. For a stable network environment, a dedicated research network was adopted. To characterize the network environment, a data packet sender and a repeater whose packet length and packet structure are similar to those of the real data packet were developed. The developed system was evaluated through in-vitro and in-vivo experiments. With the developed system, we have successfully performed remote control of the Lapabot. The roundtrip time delay for the control signal ranged from 1.4 to 4.1 ms. The total time delay for the operator including image signal acquisition and transmission delays was under 333 ms. It did not impede surgical procedures. Initial evaluation results demonstrate the feasibility of the developed telesurgical system.

  14. Migration to the ICD-10 coding system: A primer for spine surgeons (Part 1).

    Rahmathulla, Gazanfar; Deen, H Gordon; Dokken, Judith A; Pirris, Stephen M; Pichelmann, Mark A; Nottmeier, Eric W; Reimer, Ronald; Wharen, Robert E

    2014-01-01

    On 1 October 2015, a new federally mandated system goes into effect requiring the replacement of the International Classification of Disease-version 9-Clinical Modification (ICD-9-CM) with ICD-10-CM. These codes are required to be used for reimbursement and to substantiate medical necessity. ICD-10 is composite with as many as 141,000 codes, an increase of 712% when compared to ICD-9. Execution of the ICD-10 system will require significant changes in the clinical administrative and hospital-based practices. Through the transition, diminished productivity and practice revenue can be anticipated, the impacts of which the spine surgeon can minimizeby appropriate education and planning. The advantages of the new system include increased clarity and more accurate definitions reflecting patient condition, information relevant to ambulatory and managed care encounters, expanded injury codes, laterality, specificity, precise data for safety and compliance reporting, data mining for research, and finally, enabling pay-for-performance programs. The disadvantages include the cost per physician, training administrative staff, revenue loss during the learning curve, confusion, the need to upgrade hardware along with software, and overall expense to the healthcare system. With the deadline rapidly approaching, gaps in implementation result in delayed billing, delayed or diminished reimbursements, and absence of quality and outcomes data. It is thereby essential for spine surgeons to understand their role in transitioning to this new environment. Part I of this article discusses the background, coding changes, and costs as well as reviews the salient features of ICD-10 in spine surgery.

  15. [Melatonin: its role in the system of neurohumoral regulation in man. Part 2].

    Baksheev, V I; Kolomoets, N M

    2011-01-01

    Part 2 of this review concerns the application of melatonin (Mt) to the treatment of aged patients with cardiovascular diseases and other pathology with reference to its genoprotective and anticarcinogenic action. Effects of Mt on the cardiovascular system are underlain by its antioxidative, vasodilating, and sedative activities, the ability to regulate the heart rate and inhibit platelet aggregation. Certain authors report negative correlation between Mt production and blood cholesterol level. Mt was shown to protect from cardiac lesions associated with ischemia and reperfusion. Mt inhibits carcinogenesis and is active at systemic, tissue, cellular and subcellular levels. At the systemic level, Mt decreases hormonal production, stimulates immune activity, and prevents the development of metabolic syndrome. It inhibits cell proliferation and promotes apoptosis of tumour cells but suppresses it the nervous tissue. Mt activates telomerase. It decreases expression of oncogens and interferes with the action of mutagens and clastogens at the genetic level. Extensive studies of Mt protective action in nervous diseases are underway with special reference to spinal cord, brain, neuron and glial cell lesions; experimental cerebral stroke, Parkinson's and Alzheimer's diseases. Similar studies concern the role of Mt in the protection against ionizing radiation, the development of renal pathology, and ophthalmology (glaucoma, cataract). Mt is shown to influence practically all organ systems by inhibiting mutagenesis and maintaining correlation between circadian rhythms of different biological processes throughout human evolution.

  16. Design mobile satellite system architecture as an integral part of the cellular access digital network

    Chien, E. S. K.; Marinho, J. A.; Russell, J. E., Sr.

    1988-01-01

    The Cellular Access Digital Network (CADN) is the access vehicle through which cellular technology is brought into the mainstream of the evolving integrated telecommunications network. Beyond the integrated end-to-end digital access and per call network services provisioning of the Integrated Services Digital Network (ISDN), the CADN engenders the added capability of mobility freedom via wireless access. One key element of the CADN network architecture is the standard user to network interface that is independent of RF transmission technology. Since the Mobile Satellite System (MSS) is envisioned to not only complement but also enhance the capabilities of the terrestrial cellular telecommunications network, compatibility and interoperability between terrestrial cellular and mobile satellite systems are vitally important to provide an integrated moving telecommunications network of the future. From a network standpoint, there exist very strong commonalities between the terrestrial cellular system and the mobile satellite system. Therefore, the MSS architecture should be designed as an integral part of the CADN. This paper describes the concept of the CADN, the functional architecture of the MSS, and the user-network interface signaling protocols.

  17. Environmental systems analysis of biogas systems-Part II: The environmental impact of replacing various reference systems

    Boerjesson, Pal; Berglund, Maria

    2007-01-01

    This paper analyses the overall environmental impact when biogas systems are introduced and replace various reference systems for energy generation, waste management and agricultural production. The analyses are based on Swedish conditions using a life-cycle perspective. The biogas systems included are based on different combinations of raw materials and final use of the biogas produced (heat, power and transportation fuel). A general conclusion is that biogas systems normally lead to environmental improvements, which in some cases are considerable. This is often due to indirect environmental benefits of changed land use and handling of organic waste products (e.g. reduced nitrogen leaching, emissions of ammonia and methane), which often exceed the direct environmental benefits achieved when fossil fuels are replaced by biogas (e.g. reduced emissions of carbon dioxide and air pollutants). Such indirect benefits are seldom considered when biogas is evaluated from an environmental point of view. The environmental impact from different biogas systems can, however, vary significantly due to factors such as the raw materials utilised, energy service provided and reference system replaced

  18. The deployment of decentralised energy systems as part of the housing growth programme in the UK

    Williams, Jo

    2010-01-01

    The housing growth programme could offer an opportunity for accelerating the deployment of decentralised renewable energy systems (DRES) in the UK. The Government hopes to leverage private sector investment into DRES as part of new housing projects. The aim of this paper is to assess whether current regulatory and funding frameworks are sufficient to achieve this. The question is explored by drawing on the experience of developers, local authorities, energy utilities and service companies operating in the largest housing growth region in the UK-Thames Gateway. Their experience suggests that the current low intervention approach will be insufficient to generate the shift required in both industries. In order to be more successful economic and regulatory instruments should focus on producers (house-builders and energy providers) rather than consumers (households). Tighter regulation is needed to ensure that producers have a responsibility to install DRES as part of new developments, to enable connection to the grid, to ensure a sustained financial return from investment and revenue is spent on the expansion of new renewable energy infrastructure. This regulatory framework must be under-pinned by substantial funds focused on producers. Greater intervention is needed if DRES is to be included in new housing development.

  19. Toward a new payment system for inpatient rehabilitation. Part II: Reimbursing providers.

    Saitto, Carlo; Marino, Claudia; Fusco, Danilo; Arcà, Massimo; Perucci, Carlo A

    2005-09-01

    The major fault with existing reimbursement systems lies in their failure to discriminate for the effectiveness of stay, both when paying per day and when paying per episode of treatment. We sought to define an average length of effective stay and recovery trends by impairment category, to design a prospective payment system that takes into account costs and expected recovery trends, and to compare the calculated reimbursement with the predicted costs estimated in a previous study (Saitto C, Marino C, Fusco D, et al. A new prospective payment system for inpatient rehabilitation. Part I: predicting resource consumption. Med Care. 2005;43:844-855). We considered all rehabilitation admissions from 5 Italian inpatient facilities during a 12-month period for which total cost of care had already been estimated and daily cost predicted through regression model. We ascertained recovery trends by impairment category through repeated MDS-PAC schedules and factorial analysis of functional status. We defined effective stay and daily resource consumption by impairment category and used these parameters to calculate reimbursement for the admission. We compared our reimbursement with predicted cost through regression analysis and evaluated the goodness of fit through residual analysis. We calculated reimbursement for 2079 admissions. The r(2) values for the reimbursement to cost correlation ranged from 0.54 in the whole population to 0.56 for "multiple trauma" to 0.85 for "other medical disorders." The best fit was found in the central quintiles of the cost and severity distributions. For each impairment category, we determined the number of days of effective hospital stay and the trends of functional gain. We demonstrated, at least within the Italian health care system, the feasibility of a reimbursement system that matches costs with functional recovery. By linking reimbursement to effective stay adjusted for trends of functional gain, we suggest it is possible to avoid both

  20. Assessment of the greenhouse gas emissions from cogeneration and trigeneration systems. Part I: Models and indicators

    Chicco, Gianfranco; Mancarella, Pierluigi

    2008-01-01

    The diffusion of cogeneration and trigeneration plants as local generation sources could bring significant energy saving and emission reduction of various types of pollutants with respect to the separate production of electricity, heat and cooling power. The advantages in terms of primary energy saving are well established. However, the potential of combined heat and power (CHP) and combined cooling heat and power (CCHP) systems for reducing the emission of hazardous greenhouse gases (GHG) needs to be further investigated. This paper presents and discusses a novel approach, based upon an original indicator called trigeneration CO 2 emission reduction (TCO 2 ER), to assess the emission reduction of CO 2 and other GHGs from CHP and CCHP systems with respect to the separate production. The indicator is defined in function of the performance characteristics of the CHP and CCHP systems, represented with black-box models, and of the GHG emission characteristics from conventional sources. The effectiveness of the proposed approach is shown in the companion paper (Part II: Analysis techniques and application cases) with application to various cogeneration and trigeneration solutions

  1. Imaging of systemic lupus erythematosus. Part I: CNS, cardiovascular, and thoracic manifestations

    Goh, Y.P.; Naidoo, P.; Ngian, G.S.

    2013-01-01

    Systemic lupus erythematosus (SLE) is a chronic, multisystem autoimmune disease that has a relapsing and remitting course. It has a wide range of non-specific symptoms with various organ manifestations. In 1982, the American College of Rheumatology (ACR) published the revised criteria for the classification of SLE. The diagnosis of SLE may be made if four or more of the 11 ACR criteria are present, either serially or simultaneously, during any interval of observation. Whilst the diagnosis of SLE is based on clinical and laboratory features, with no universally accepted radiological diagnostic criteria, imaging is nonetheless useful for diagnosing specific organ manifestations, monitoring disease progression, and identifying complications secondary to immunosuppressive therapy. In this review, we describe the spectrum of radiological findings of SLE in various organ systems and compile a list of organ manifestations including the most frequently occurring diseases as well as the rare but not-to-be-missed diseases. This review aims to serve as a concise reference tool in an endeavour to assist clinicians and radiologists in the diagnosis and monitoring of this disease. This pictorial review presents the various radiological findings of CNS, cardiovascular and thoracic manifestation of SLE. The gastrointestinal, renal and musculoskeletal systems will be covered in part II.

  2. A One-Component, Fast-Cure, and Economical Epoxy Resin System Suitable for Liquid Molding of Automotive Composite Parts

    Yiru Wang

    2018-04-01

    Full Text Available Imidazole cured epoxy resin systems were evaluated for one-component, fast-curing resins for liquid molding of automotive composite parts according to industry requirements. It was demonstrated that an epoxy resin-1-(cyanoethyl-2-ethyl-4-methylimidazol(EP-1C2E4MIM system would cure in a few minutes at 120 °C, while exhibiting acceptable pot life, viscosity profiles, and low water absorption. Moreover, this system yielded high Tg parts with mechanical properties similar to the amine-epoxy systems, which are the mainstream two-component epoxy resin systems for automobiles.

  3. The Systemic Products as a Source of Competitive Advantage on Healthcare Sector Example. Part II

    Izabela SZTANGRET

    2015-12-01

    Full Text Available In the healthcare sector, different healthcare providers, such as home care, primary care, pharmacies and hospital clinics but also a financial institution, collaborate in order to increase values for patients, such as better health state, more complex services, high quality of services, and increased feeling of safety. By creating a value, flexible networks health care providers and additional actors create value through collaboration. The purpose of this article is to identify the specific character of systemic healthcare product, created in synergy relations of medical enntities in the area of new way of meeting customers’ needs. Critical analysis of literature in the field of studied category is conducted in the article; furthermore qualitative method of empirical studies (case study and quantitative (online questionnaire is applied for practical illustration of described processes and phenomena. The article is a second part of the stud.

  4. STEVENS–JOHNSON SYNDROME — TOXIC EPIDERMAL NECTROLYSIS IN CHILDREN. PART II. SYSTEM, LOCAL TREATMENT

    V.F. Zhernosek

    2011-01-01

    Full Text Available The second part of the article concerning Stevens–Johnson syndrome — toxic epidermal necrolysis (SJS–TEN is devoted to the treatment of this disease. The modern approaches to the use of systemic agents — antibacterial, antiviral, analgesics and sedatives, and anticoagulants are discussed in detail. Regulations of the drugs use depending on the patient state and the etiology of SJS–TEN are marked out. The basic principles of the fluid therapy for rehydration and dehydration prevention are shown in the article. Particular attention is paid to the local therapy — treatment of mucous membranes and skin lesions.Key words: Stevens-Johnson syndrome, toxic epidermal necrolysis, children, antibiotic therapy, topical treatment.

  5. THE PRECAMBRIAN HISTORY OF THE ORIGIN AND EVOLUTION OF THE SOLAR SYSTEM AND EARTH. PART 1

    M. I. Kuz’min

    2014-01-01

    Full Text Available The paper provides a review of early stages of development the Solar System and the geological history of Earth with reference to the latest data on the origin of the Solar System and the formation of the first continental rocks and results of studies of zircon, the oldest mineral so far dated on Earth. The formation of the Solar System from a gas-and-dust nebula is estimated to have begun 4.568 billion years ago. Ice was formed 1.5 million years later; it concentrated at the periphery of the system and served as the material for the largest planets, Jupiter and Saturn. In the central areas of the system, asteroids with diameters of about 10 km were formed. Their small bodies were composed of the basic material of the solar nebula, as evidenced by carbonaceous chondrite, CI, which composition is similar to the composition of the Sun, with the exception of hydrogen, helium, and volatile components that served as the main material for peripheral planets of the Solar System. Due to collision and partial merger of such small bodies, the formation of embryos of the terrestrial planets was initiated. Gravity made such embryos to cluster into larger bodies. After 7 million years, large asteroids and planet Mars were formed. It took 11 million years to form Planet Earth with a mass of 63 %, and 30 million years to form 93 % of its mass. Almost from the beginning of the formation of the Earth, short-lived radionuclides, 26Al and 60Fe, caused warming up of the small planetary bodies which led to the formation of their cores. During the initial stages, small magma reservoirs were formed, and molten iron particles gathered in the centres of the planetary bodies. As suggested by the ratio of 182W/184W, the major part of the core was formed within 20 million years, while its full mass accumulated completely within the next 50 million years. In 30–40 million years after the creation of the Solar System, the Earth collided with a cosmic body which mass was

  6. MACHINE LEARNING IMPLEMENTATION FOR THE CLASSIFICATION OF ATTACKS ON WEB SYSTEMS. PART 1

    K. Smirnova

    2017-08-01

    Full Text Available The possibility of applying machine learning is considered for the classification of malicious requests to a Web application. This approach excludes the use of deterministic analysis systems (for example, expert systems, and based on the application of a cascade of neural networks or perceptrons on an approximate model to the real human brain. The main idea of the work is to enable to describe complex attack vectors consisting of feature sets, abstract terms for compiling a training sample, controlling the quality of recognition and classifying each of the layers (networks participating in the work, with the ability to adjust not the entire network, But only a small part of it, in the training of which a mistake or inaccuracy crept in.  The design of the developed network can be described as a cascaded, scalable neural network.  The developed system of intrusion detection uses a three-layer neural network. Layers can be built independently of each other by cascades. In the first layer, for each class of attack recognition, there is a corresponding network and correctness is checked on this network. To learn this layer, we have chosen classes of things that can be classified uniquely as yes or no, that is, they are linearly separable. Thus, a layer is obtained not just of neurons, but of their microsets, which can best determine whether is there some data class in the query or not. The following layers are not trained to recognize the attacks themselves, they are trained that a set of attacks creates certain threats. This allows you to more accurately recognize the attacker's attempts to bypass the defense system, as well as classify the target of the attack, and not just its fact. Simple layering allows you to minimize the percentage of false positives.

  7. Performance evaluations of continuous glucose monitoring systems: precision absolute relative deviation is part of the assessment.

    Obermaier, Karin; Schmelzeisen-Redeker, Günther; Schoemaker, Michael; Klötzer, Hans-Martin; Kirchsteiger, Harald; Eikmeier, Heino; del Re, Luigi

    2013-07-01

    Even though a Clinical and Laboratory Standards Institute proposal exists on the design of studies and performance criteria for continuous glucose monitoring (CGM) systems, it has not yet led to a consistent evaluation of different systems, as no consensus has been reached on the reference method to evaluate them or on acceptance levels. As a consequence, performance assessment of CGM systems tends to be inconclusive, and a comparison of the outcome of different studies is difficult. Published information and available data (as presented in this issue of Journal of Diabetes Science and Technology by Freckmann and coauthors) are used to assess the suitability of several frequently used methods [International Organization for Standardization, continuous glucose error grid analysis, mean absolute relative deviation (MARD), precision absolute relative deviation (PARD)] when assessing performance of CGM systems in terms of accuracy and precision. The combined use of MARD and PARD seems to allow for better characterization of sensor performance. The use of different quantities for calibration and evaluation, e.g., capillary blood using a blood glucose (BG) meter versus venous blood using a laboratory measurement, introduces an additional error source. Using BG values measured in more or less large intervals as the only reference leads to a significant loss of information in comparison with the continuous sensor signal and possibly to an erroneous estimation of sensor performance during swings. Both can be improved using data from two identical CGM sensors worn by the same patient in parallel. Evaluation of CGM performance studies should follow an identical study design, including sufficient swings in glycemia. At least a part of the study participants should wear two identical CGM sensors in parallel. All data available should be used for evaluation, both by MARD and PARD, a good PARD value being a precondition to trust a good MARD value. Results should be analyzed and

  8. An Explicit Formulation of Singularity-Free Dynamic Equations of Mechanical Systems in Lagrangian Form---Part Two: Multibody Systems

    Pål Johan From

    2012-04-01

    Full Text Available This paper presents the explicit dynamic equations of multibody mechanical systems. This is the second paper on this topic. In the first paper the dynamics of a single rigid body from the Boltzmann--Hamel equations were derived. In this paper these results are extended to also include multibody systems. We show that when quasi-velocities are used, the part of the dynamic equations that appear from the partial derivatives of the system kinematics are identical to the single rigid body case, but in addition we get terms that come from the partial derivatives of the inertia matrix, which are not present in the single rigid body case. We present for the first time the complete and correct derivation of multibody systems based on the Boltzmann--Hamel formulation of the dynamics in Lagrangian form where local position and velocity variables are used in the derivation to obtain the singularity-free dynamic equations. The final equations are written in global variables for both position and velocity. The main motivation of these papers is to allow practitioners not familiar with differential geometry to implement the dynamic equations of rigid bodies without the presence of singularities. Presenting the explicit dynamic equations also allows for more insight into the dynamic structure of the system. Another motivation is to correct some errors commonly found in the literature. Unfortunately, the formulation of the Boltzmann-Hamel equations used here are presented incorrectly. This has been corrected by the authors, but we present here, for the first time, the detailed mathematical details on how to arrive at the correct equations. We also show through examples that using the equations presented here, the dynamics of a single rigid body is reduced to the standard equations on a Lagrangian form, for example Euler's equations for rotational motion and Euler--Lagrange equations for free motion.

  9. Quantum-chemical studies of quasi-one-dimensional electron systems. Part 2. Cumulenes and origin of the forbidden zone

    Yuriy Kruglyak

    2015-06-01

    Full Text Available This review is devoted to the basic problem in quantum theory of quasi-one-dimensional electron systems like polyenes (Part 1 and cumulenes (Part 2 – physical origin of the forbidden zone in these and analogous 1D electron systems due to two possible effects – Peierls instability (bond alternation and Mott instability (electron correlation. Both possible contradiction and coexistence of the Mott and Peierls instabilities are summerized on the basis of the Kiev quantum chemistry team research projects.

  10. Artificial groundwater recharge as integral part of a water resources system in a humid environment

    Kupfersberger, Hans; Stadler, Hermann

    2010-05-01

    In Graz, Austria, artificial groundwater recharge has been operated as an integral part of the drinking water supply system for more than thirty years. About 180 l/s of high quality water from pristine creeks (i.e. no pre-treatment necessary) are infiltrated via sand and lawn basins and infiltration trenches into two phreatic aquifers to sustain the extraction of approximately 400 l/s. The remaining third of drinking water for roughly 300.000 people is provided by a remote supply line from the East alpine karst region Hochschwab. By this threefold model the water supply system is less vulnerable to external conditions. In the early 1980's the infiltration devices were also designed as a hydraulic barrier against riverbank infiltration from the river Mur, which at that time showed seriously impaired water quality due to upstream paper mills. This resulted into high iron and manganese groundwater concentrations which lead to clogging of the pumping wells. These problems have been eliminated in the meantime due to the onsite purification of paper mill effluents and the construction of many waste water treatment plants. The recharge system has recently been thoroughly examined to optimize the operation of groundwater recharge and to provide a basis for further extension. The investigations included (i) field experiments and laboratory analyses to improve the trade off between infiltration rate and elimination capacities of the sand filter basins' top layer, (ii) numerical groundwater modelling to compute the recovery rate of the recharged water, the composition of the origin of the pumped water, emergency scenarios due to the failure of system parts, the transient capture zones of the withdrawal wells and the coordination of recharge and withdrawal and (iii) development of an online monitoring setup combined with a decision support system to guarantee reliable functioning of the entire structure. Additionally, the depreciation, maintenance and operation costs of the

  11. The advanced EctoSys electrolysis as an integral part of a ballast water treatment system.

    Echardt, J; Kornmueller, A

    2009-01-01

    A full-scale 500 m(3)/h ballast water treatment system was tested according to the landbased type approval procedure of the International Maritime Organization (IMO). The system consists of disc filters followed by the advanced EctoSys electrolysis as an integral part for disinfection. The test water quality exceeded by far the minimum requirements for type approval testing. Due to the properties of the special electrodes used together with the striking disinfection effect, the disinfectants assumed to be produced inline by the EctoSys cell in river water were hydroxyl radicals, while in brackish water additionally chlorine and consequently the more stable bromine were formed. In river water, no residual oxidants could be detected in accordance with the assumed production of not responding, highly-reactive and short-living hydroxyl radicals. Accordingly, disinfection byproduct (DBP) formation was very low and close to the limit of quantification in river water. While in brackish water, initial residual oxidant concentrations were maximum 2 mg/L as chlorine and mostly brominated DBP (especially bromoform and bromate) were found. Overall considering this worst case test approach, the DBP concentrations of the treated effluents were below or in the range of the WHO Drinking Water Guideline values and therefore evaluated as acceptable for discharge to the environment. The stringent discharge standard by IMO concerning viable organisms was fully met in river and brackish water, proving the disinfection efficiency of the EctoSys electrolysis against smaller plankton and bacteria.

  12. Phase-ambiguity resolution for QPSK modulation systems. Part 2: A method to resolve offset QPSK

    Nguyen, Tien Manh

    1989-01-01

    Part 2 presents a new method to resolve the phase-ambiguity for Offset QPSK modulation systems. When an Offset Quaternary Phase-Shift-Keyed (OQPSK) communications link is utilized, the phase ambiguity of the reference carrier must be resolved. At the transmitter, two different unique words are separately modulated onto the quadrature carriers. At the receiver, the recovered carrier may have one of four possible phases, 0, 90, 180, or 270 degrees, referenced to the nominally correct phase. The IF portion of the channel may cause a phase-sense reversal, i.e., a reversal in the direction of phase rotation for a specified bit pattern. Hence, eight possible phase relationships (the so-called eight ambiguous phase conditions) between input and output of the demodulator must be resolved. Using the In-phase (I)/Quadrature (Q) channel reversal correcting property of an OQPSK Costas loop with integrated symbol synchronization, four ambiguous phase conditions are eliminated. Thus, only four possible ambiguous phase conditions remain. The errors caused by the remaining ambiguous phase conditions can be corrected by monitoring and detecting the polarity of the two unique words. The correction of the unique word polarities results in the complete phase-ambiguity resolution for the OQPSK system.

  13. Stalking. Part II: Victims' problems with the legal system and therapeutic considerations.

    Abrams, K M; Robinson, G E

    1998-06-01

    This paper is the second of 2 parts reviewing the topic of stalking. It focuses on victims difficulties with the legal system and the psychotherapeutic tasks for victims and therapists. Computerized literature searches were used to identify relevant papers from psychiatric and legal journals. Publications by victims' and women's organizations provided additional information. Victims suffer emotional consequences from being stalked. Additional stress is caused by the legal system's lack of understanding of the causes and consequences of stalking and inadequate and unenforced laws. The treatment of victims requires a comprehensive approach, including education, supportive psychotherapy, and discussion of practical measures. Therapists may overidentify with the patient's powerlessness or hesitate to take on a case out of fear of the stalker. Female therapists may protect themselves against the realization of their own vulnerability by blaming the victim, while male therapists may feel defensive or overprotective. Stalking is a crime with major mental health consequences which is often poorly understood by society. Therapists need to be aware of the victim's emotional reactions, the types of legal and practical supports available, and the possible biases of society. Further education and research should be encouraged.

  14. Indirect adaptive fuzzy wavelet neural network with self- recurrent consequent part for AC servo system.

    Hou, Runmin; Wang, Li; Gao, Qiang; Hou, Yuanglong; Wang, Chao

    2017-09-01

    This paper proposes a novel indirect adaptive fuzzy wavelet neural network (IAFWNN) to control the nonlinearity, wide variations in loads, time-variation and uncertain disturbance of the ac servo system. In the proposed approach, the self-recurrent wavelet neural network (SRWNN) is employed to construct an adaptive self-recurrent consequent part for each fuzzy rule of TSK fuzzy model. For the IAFWNN controller, the online learning algorithm is based on back propagation (BP) algorithm. Moreover, an improved particle swarm optimization (IPSO) is used to adapt the learning rate. The aid of an adaptive SRWNN identifier offers the real-time gradient information to the adaptive fuzzy wavelet neural controller to overcome the impact of parameter variations, load disturbances and other uncertainties effectively, and has a good dynamic. The asymptotical stability of the system is guaranteed by using the Lyapunov method. The result of the simulation and the prototype test prove that the proposed are effective and suitable. Copyright © 2017. Published by Elsevier Ltd.

  15. Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part I - Methodology

    Balli, Ozgur; Aras, Haydar; Hepbasli, Arif

    2010-01-01

    This paper consists of two parts. Part 1 deals with the thermodynamic and thermoeconomic methodology of a trigeneration (TRIGEN) system with a rated output of 6.5 MW gas-diesel engine while the application of the methodology is presented in Part 2. The system has been installed in the Eskisehir Industry Estate Zone in Turkey. Thermodynamic methodology includes the relations and performance parameters for energy and exergy analysis, while thermoeconomic methodology covers the cost balance relations, cost of products and thermodynamic inefficiencies, relative cost difference and exergoeconomic factor.

  16. Avoid the Pitfalls: Benefits of Formal Part C Data System Governance. Revised

    Mauzy, Denise; Bull, Bruce; Gould, Tate

    2016-01-01

    Since the initial authorizing legislation for Part C of the Individuals with Disabilities Education Act (IDEA) in 1986, the scope and complexity of data collected by Part C programs have significantly increased. Formal governance establishes responsibility for Part C data and enables program staff to improve the effectiveness of data processes and…

  17. Factors Affecting Part-Time Faculty Job Satisfaction in the Colorado Community College System

    Cashwell, Allison L.

    2009-01-01

    How do part-time faculty members in community colleges view their roles? Data from part-time faculty responses regarding their experiences in higher education vary. Valadez and Antony (2001) analyzed data from 6,811 part-time faculty collected from the National Center for Education Statistics' (NCES) 1992-1993 National Survey of Postsecondary…

  18. Formulating autism systemically: Part 2 - A 12-year prospective case study.

    Brewerton, Nicky; Robson, Katrina; Crittenden, Patricia M

    2017-07-01

    This prospective case study illustrates the ideas on the developmental origins of some cases of autism that were described in Part 1 of this article. We explored and found support for several systemic hypotheses regarding the experience of 'Graeme' and his mother. Graeme's story is told prospectively from the age of 3 until 15. Three independent sources of information are reported: hypotheses from the literature and case review in Part 1 of this article, the school's experience, and observations from the assessments of attachment when Graeme was turning 6. These three streams of information are integrated here. The review of the literature and clinical cases gives us a wide-angle lens, empirically supporting our focus on danger in relationships. The school's experience describes working with a child with undiagnosed autism. The assessments of attachment both provide information about family members' psychological strategies for protection from danger and also include the mother's childhood history of family threat. Their synthesis permits us to construct a developmental history, from Graeme's mother's childhood history of being triangulated into her parents' hidden marital discord to it's repetition for Graeme in her own marriage. New observations included mum's postural/gestural communication to Graeme and her possible ambivalence about males. Strikingly, Graeme was a case study (Attachment & Family Therapy, ch. 6) before he was diagnosed with autism. That presentation focused on Graeme's feeling of rejection by his father. In the same book, an interpersonal formulation of autism was offered (ch. 3), but it was not connected to Graeme, showing that when one lacks crucial information, the clinical formulation is distorted. The crucial information in this case was the mother's psychological history. Our case suggests that filling the blind spot in the research on autism with information about family functioning over at least two generations might change the

  19. A Study of Future Communications Concepts and Technologies for the National Airspace System-Part III

    Ponchak, Denise S.; Apaza, Rafael D.; Wichgersm Joel M.; Haynes, Brian; Roy, Aloke

    2014-01-01

    The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is investigating current and anticipated wireless communications concepts and technologies that the National Airspace System (NAS) may need in the next 50 years. NASA has awarded three NASA Research Announcements (NAR) studies with the objective to determine the most promising candidate technologies for air-to-air and air-to-ground data exchange and analyze their suitability in a post-NextGen NAS environment. This paper will present progress made in the studies and describe the communications challenges and opportunities that have been identified as part of the study. NASA's NextGen Concepts and Technology Development (CTD) Project integrates solutions for a safe, efficient and high-capacity airspace system through joint research efforts and partnerships with other government agencies. The CTD Project is one of two within NASA's Airspace Systems Program and is managed by the NASA Ames Research Center. Research within the CTD Project is in support the 2011 NASA Strategic Plan Sub-Goal 4.1: Develop innovative solutions and advanced technologies, through a balanced research portfolio, to improve current and future air transportation. The focus of CTD is on developing capabilities in traffic flow management, dynamic airspace configuration, separation assurance, super density operations and airport surface operations. Important to its research is the development of human/automation information requirements and decisionmaking guidelines for human-human and human-machine airportal decision-making. Airborne separation, oceanic intrail climb/descent and interval management applications depend on location and intent information of surrounding aircraft. ADS-B has been proposed to provide the information exchange, but other candidates such as satellite-based receivers, broadband or airborne internet, and cellular communications are possible candidate's.

  20. Support system for welded part inspection using X-ray. Simplified inspection system which does not need skilled workers

    Suga, Yasuo

    1995-01-01

    X-ray radiography has the excellent ability for operation and recording, accordingly, it has been used widely in industrial fields, but for deciding the presence of defects and their kinds and shapes from X-ray films, skilled workers are required. Recently because of the shortage of skilled workers and the increase of inspection efficiency, the necessity of its automation increased. The images of the films of the X-ray inspection of welded part are photographed with a CCD camera, and these are taken in a personal computer as the image data, then image processing is applied to them, and defect images are extracted automatically. Further, the technique of displaying the images so that inspectors can recognize them easily is devised. These procedures were examined. The constitution of the system the way of thinking in developing the system, the acquiring of high contrast images, the emphasis of defect images, the elimination of noise the treatment of emphasizing nuclear defect images, the elimination of background and the extraction of defect images, the results of the processing and image display are reported. The order of processes, the kind of a filter used and so on can be changed according to the purpose, the kind of welding and the image quality of films. (K.I.)

  1. 78 FR 68107 - Order Exempting Broker-Dealers Participating in the Proposed Global Offering of Meridian Energy...

    2013-11-13

    ...''), Deutsche Bank AG, New Zealand Branch/Craigs Investment Partners Limited, Goldman Sachs New Zealand and... and Australia, and installment and partly paid structures have been used in numerous other transactions in New Zealand and Australia in recent years. Conclusion It is therefore ordered, that Joint Lead...

  2. The endocrine system controlling sexual reproduction in animals: Part of the evolutionary ancient but well conserved immune system?

    De Loof, Arnold; Schoofs, Liliane; Huybrechts, Roger

    2016-01-15

    Drastic changes in hormone titers, in particular of steroid hormones, are intuitively interpreted as necessary and beneficial for optimal functioning of animals. Peaks in progesterone- and estradiol titers that accompany the estrus cycle in female vertebrates as well as in ecdysteroids at each molt and during metamorphosis of holometabolous insects are prominent examples. A recent analysis of insect metamorphosis yielded the view that, in general, a sharp rise in sex steroid hormone titer signals that somewhere in the body some tissue(s) is undergoing programmed cell death/apoptosis. Increased steroid production is part of this process. Typical examples are ovarian follicle cells in female vertebrates and invertebrates and the prothoracic gland cells, the main production site of ecdysteroids in larval insects. A duality emerges: programmed cell death-apoptosis is deleterious at the cellular level, but it may yield beneficial effects at the organismal level. Reconciling both opposites requires reevaluating the probable evolutionary origin and role of peptidic brain hormones that direct steroid hormone synthesis. Do e.g. Luteinizing Hormone in vertebrates and Prothoracicotropic Hormone (PTTH: acting through the Torso receptor) in insects still retain an ancient role as toxins in the early immune system? Does the functional link of some neuropeptides with Ca(2+)-induced apoptosis make sense in endocrine archeology? The endocrine system as a remnant of the ancient immune system is undoubtedly counterintuitive. Yet, we will argue that such paradigm enables the logical framing of many aspects, the endocrine one inclusive of both male and female reproductive physiology. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. A ballistics module as a part of the fire control system

    Branka R. Luković

    2013-10-01

    Full Text Available This article presents a ballistics module as a part of the fire control system of weapons for fire support (mortars, artillery weapons and rocket launchers. The software is "open" with the prominence of autonomy work. It can be modulated and adapted on the user demand. Moreover, it is independent of the hardware base. Introduction: The fire control system is based on a ballistic module (BM which determines the firing data for each weapon tool in the battery. Ballistic calculations, for the given position of the target in relation to the position of tools in the given weather conditions, determine firing data (elevation, direction, timing and locating devices so that the missile seems to cause the desired effect. This paper gives the basic information about the features the BM performs and the manner of their implementation in the fire control system without going into algorithmic solution procedures. Ballistic problem in the fire control system: Ballistic calculation is based on a trajectory calculation of all kinds of projectiles (current, time-fuze, illuminating, smoke, with conventional propulsion, rocket, with built-in gas generator, etc.. Instead of previous solutions, where a trajectory calculation of the fire control system was done by approximate methods, in this BM the trajectory calculation is made by the same model with the same data as for a weapon and ammunition in the process of creating a firing table. The data used in the fire control system are made simultaneously with the preparation of firing tables for a particular tool and associated ammunition,. A modified model of particle, standardized at the NATO level, is also used. Taking into account the meteorological situation, before the trajectory calculation is done, a relative position of the target in relation to the position of the tool should be determined. A selection or loading check is carried out (possibility of reaching a given target as well as the point at which the

  4. Testing the potential of geochemical techniques for identifying hydrological systems within landslides in partly weathered marls

    Bogaard, T. A.; Buma, J. T.; Klawer, C. J. M.

    2004-03-01

    This paper's objective is to determine how useful geochemistry can be in landslide investigations. More specifically, what additional information can be gained by analysing the cation exchange capacity (CEC) and cation composition in respect to the hydrological system of a landslide area in clayey material. Two cores from the Boulc-Mondorès landslide (France) and one core from the Alvera landslide (Italy) were analysed. The NH 4Ac and NaCl laboratory techniques are tested. The geochemical results are compared with the core descriptions and interpreted with respect to their usefulness. Both analysis techniques give identical results for CEC, and are plausible on the basis of the available clay content information. The determination of the exchangeable cations was more difficult, since part of the marls dissolved. With the ammonium-acetate method more of the marls are dissolved than with the sodium-chloride method. The NaCl method is preferred for the determination of the cation fractions at the complex, be it that this method has the disadvantage that the sodium fraction cannot be determined. To overcome this problem, it is recommended to try other displacement fluids. In the Boulc-Mondorès example, the subsurface information that can be extracted from CEC analyses was presented. In the Boulc-Mondorès cores deviant intervals of CEC could be identified. These are interpreted as weathered layers (and preferential flow paths) that may develop or have already developed into slip surfaces. The major problem of the CEC analyses was to explain the origin of the differences found in the core samples. Both Alvera and Boulc-Mondorès examples show transitions in cation composition with depth. It was shown that the exchangeable caution fractions can be useful in locating boundaries between water types, especially the boundary between the superficial, rain-fed hydrological system and the lower, regional groundwater system. This information may be important for landslide

  5. Multisource inverse-geometry CT. Part I. System concept and development

    De Man, Bruno, E-mail: deman@ge.com; Harrison, Dan; Yin, Zhye [CT Systems and Applications Laboratory, GE Global Research, Niskayuna, New York 12309 (United States); Uribe, Jorge [Functional Imaging Laboratory, GE Global Research, Niskayuna, New York 12309 (United States); Baek, Jongduk [School of Integrated Technology, Yonsei University, Incheon 406-840 (Korea, Republic of); Longtin, Randy; Roy, Jaydeep; Frutschy, Kristopher [Mechanical Systems Technologies, GE Global Research, Niskayuna, New York 12309 (United States); Waters, Bill [Design and Development Shops, GE Global Research, Niskayuna, New York 12309 (United States); Wilson, Colin; Inzinna, Lou; Neculaes, V. Bogdan [High Energy Physics Laboratory, GE Global Research, Niskayuna, New York 12309 (United States); Short, Jonathan [Detector Laboratory, GE Global Research, Niskayuna, New York 12309 (United States); Reynolds, Joseph [High Frequency Power Electronics Laboratory, GE Global Research, Niskayuna, New York 12309 (United States); Senzig, Bob [Molecular Imaging and Computed Tomography, GE Healthcare, Waukesha, Wisconsin 53188 (United States); Pelc, Norbert [Department of Radiology, Stanford University, Stanford, California 94305 (United States)

    2016-08-15

    Purpose: This paper presents an overview of multisource inverse-geometry computed tomography (IGCT) as well as the development of a gantry-based research prototype system. The development of the distributed x-ray source is covered in a companion paper [V. B. Neculaes et al., “Multisource inverse-geometry CT. Part II. X-ray source design and prototype,” Med. Phys. 43, 4617–4627 (2016)]. While progress updates of this development have been presented at conferences and in journal papers, this paper is the first comprehensive overview of the multisource inverse-geometry CT concept and prototype. The authors also provide a review of all previous IGCT related publications. Methods: The authors designed and implemented a gantry-based 32-source IGCT scanner with 22 cm field-of-view, 16 cm z-coverage, 1 s rotation time, 1.09 × 1.024 mm detector cell size, as low as 0.4 × 0.8 mm focal spot size and 80–140 kVp x-ray source voltage. The system is built using commercially available CT components and a custom made distributed x-ray source. The authors developed dedicated controls, calibrations, and reconstruction algorithms and evaluated the system performance using phantoms and small animals. Results: The authors performed IGCT system experiments and demonstrated tube current up to 125 mA with up to 32 focal spots. The authors measured a spatial resolution of 13 lp/cm at 5% cutoff. The scatter-to-primary ratio is estimated 62% for a 32 cm water phantom at 140 kVp. The authors scanned several phantoms and small animals. The initial images have relatively high noise due to the low x-ray flux levels but minimal artifacts. Conclusions: IGCT has unique benefits in terms of dose-efficiency and cone-beam artifacts, but comes with challenges in terms of scattered radiation and x-ray flux limits. To the authors’ knowledge, their prototype is the first gantry-based IGCT scanner. The authors summarized the design and implementation of the scanner and the authors presented

  6. Testing the potential of geochemical techniques in identifying hydrological systems within landslides in partly weathered marls

    Bogaard, T. A.

    2003-04-01

    This paper’s objectives are twofold: to test the potential of cation exchange capacity (CEC) analysis for refinement of the knowledge of the hydrological system in landslide areas; and to examine two laboratory CEC analysis techniques on their applicability to partly weathered marls. The NH4Ac and NaCl laboratory techniques are tested. The geochemical results are compared with the core descriptions and interpreted with respect to their usefulness. Both analysis techniques give identical results for CEC, and are plausible on the basis of the available clay content information. The determination of the exchangeable cations was more difficult, since part of the marls dissolved. With the ammonium-acetate method more of the marls are dissolved than with the sodium-chloride method. This negatively affects the results of the exchangeable cations. Therefore, the NaCl method is to be preferred for the determination of the cation fractions at the complex, be it that this method has the disadvantage that the sodium fraction cannot be determined. To overcome this problem it is recommended to try and use another salt e.g. SrCl2 as displacement fluid. Both Alvera and Boulc-Mondorès examples show transitions in cation composition with depth. It was shown that the exchangeable cation fractions can be useful in locating boundaries between water types, especially the boundary between the superficial, rain fed hydrological system and the lower, regional ground water system. This information may be important for landslide interventions since the hydrological system and the origin of the water need to be known in detail. It is also plausible that long-term predictions of slope stability may be improved by knowledge of the hydrogeochemical evolution of clayey landslides. In the Boulc-Mondorès example the subsurface information that can be extracted from CEC analyses was presented. In the Boulc-Mondorès cores deviant intervals of CEC could be identified. These are interpreted as

  7. The University Münster Model Surgery System for Orthognathic Surgery. Part II -- KD-MMS.

    Ehmer, Ulrike; Joos, Ulrich; Ziebura, Thomas; Flieger, Stefanie; Wiechmann, Dirk

    2013-01-04

    Model surgery is an integral part of the planning procedure in orthognathic surgery. Most concepts comprise cutting the dental cast off its socket. The standardized spacer plates of the KD-MMS provide for a non-destructive, reversible and reproducible means of maxillary and/or mandibular plaster cast separation. In the course of development of the system various articulator types were evaluated with regard to their capability to provide a means of realizing the concepts comprised of the KD-MMS. Special attention was dedicated to the ability to perform three-dimensional displacements without cutting of plaster casts. Various utilities were developed to facilitate maxillary displacement in accordance to the planning. Objectives of this development comprised the ability to implement the values established in the course of two-dimensional ceph planning. The system - KD-MMS comprises a set of hardware components as well as a defined procedure. Essential hardware components are red spacer and blue mounting plates. The blue mounting plates replace the standard yellow SAM mounting elements. The red spacers provide for a defined leeway of 8 mm for three-dimensional movements. The non-destructive approach of the KD-MMS makes it possible to conduct different model surgeries with the same plaster casts as well as to restore the initial, pre-surgical situation at any time. Thereby, surgical protocol generation and gnathologic splint construction are facilitated. The KD-MMS hardware components in conjunction with the defined procedures are capable of increasing efficiency and accuracy of model surgery and splint construction. In cases where different surgical approaches need to be evaluated in the course of model surgery, a significant reduction of chair time may be achieved.

  8. Severity scoring in the critically ill: part 2: maximizing value from outcome prediction scoring systems.

    Breslow, Michael J; Badawi, Omar

    2012-02-01

    Part 2 of this review of ICU scoring systems examines how scoring system data should be used to assess ICU performance. There often are two different consumers of these data: lCU clinicians and quality leaders who seek to identify opportunities to improve quality of care and operational efficiency, and regulators, payors, and consumers who want to compare performance across facilities. The former need to know how to garner maximal insight into their care practices; this includes understanding how length of stay (LOS) relates to quality, analyzing the behavior of different subpopulations, and following trends over time. Segregating patients into low-, medium-, and high-risk populations is especially helpful, because care issues and outcomes may differ across this severity continuum. Also, LOS behaves paradoxically in high-risk patients (survivors often have longer LOS than nonsurvivors); failure to examine this subgroup separately can penalize ICUs with superior outcomes. Consumers of benchmarking data often focus on a single score, the standardized mortality ratio (SMR). However, simple SMRs are disproportionately affected by outcomes in high-risk patients, and differences in population composition, even when performance is otherwise identical, can result in different SMRs. Future benchmarking must incorporate strategies to adjust for differences in population composition and report performance separately for low-, medium- and high-acuity patients. Moreover, because many ICUs lack the resources to care for high-acuity patients (predicted mortality >50%), decisions about where patients should receive care must consider both ICU performance scores and their capacity to care for different types of patients.

  9. Risk from a pressurized toxic gas system: Part 2, Dispersal consequences

    Brereton, S.J.; Martin, D.; Lane, S.G.; Altenbach, T.J.

    1995-04-01

    During the preparation of a Safety Analysis Report at the Lawrence Livermore National Laboratory, we studied the release of chlorine from a compressed gas experimental apparatus. This paper presents the second part in a series of two papers on this topic. The first paper focuses on the frequency of an unmitigated release from the system; this paper discusses the consequences of the release. The release of chlorine from the experimental apparatus was modeled as an unmitigated blowdown through a 0.25 inch (0.0064 m) outside diameter tube. The physical properties of chlorine were considered as were the dynamics of the fluid flow problem. The calculated release rate was used as input for the consequence assessment. Downwind concentrations as a function of time were evaluated and then compared to suggested guidelines. For comparison purposes, a typical water treatment plant was briefly studied. The lower hazard presented by the LLNL operation becomes evident when its release is compared to the release of material from a water treatment plant, a hazard which is generally accepted by the public

  10. Pulmonary haptoglobin (pHp) is part of the surfactant system in the human lung.

    Abdullah, Mahdi; Goldmann, Torsten

    2012-11-20

    Since the existence of pHp was demonstrated, it has been shown that this molecule and its receptor CD163 are regulated by different stimuli. Furthermore, a comparably fast secretion of pHp was described as well as the immuno-stimulatory effects. The intention of this study was to elucidate the role of pHp in the human lungs further. Here we show, by means of confocal microscopy and immune-electron-microscopy, a clear co-localization of pHp with surfactant protein-B in lamellar bodies of alveolar epithelial cells type II. These results are underlined by immunohistochemical stainings in differently fixed human lung tissues, which show pHp in vesicular and released form. The images of the released form resemble the intended position of surfactant in the human alveolus. pHp is secreted by Alveolar epithelial cells type II as previously shown. Moreover, pHp is co-localized with Surfactant protein-B. We conclude that the presented data shows that pHp is a native part of the surfactant system in the human lung. http://www.diagnosticpathology.diagnomx.eu/vs/2563584738239912.

  11. Building an outpatient imaging center: A case study at genesis healthcare system, part 2.

    Yanci, Jim

    2006-01-01

    In the second of 2 parts, this article will focus on process improvement projects utilizing a case study at Genesis HealthCare System located in Zanesville, OH. Operational efficiency is a key step in developing a freestanding diagnostic imaging center. The process improvement projects began with an Expert Improvement Session (EIS) on the scheduling process. An EIS session is a facilitated meeting that can last anywhere from 3 hours to 2 days. Its intention is to take a group of people involved with the problem or operational process and work to understand current failures or breakdowns in the process. Recommendations are jointly developed to overcome any current deficiencies, and a work plan is structured to create ownership over the changes. A total of 11 EIS sessions occurred over the course of this project, covering 5 sections: Scheduling/telephone call process, Pre-registration, Verification/pre-certification, MRI throughput, CT throughput. Following is a single example of a project focused on the process improvement efforts. All of the process improvement projects utilized a quasi methodology of "DMAIC" (Define, Measure, Analyze, Improve, and Control).

  12. LOLA SYSTEM: A code block for nodal PWR simulation. Part. II - MELON-3, CONCON and CONAXI Codes

    Aragones, J M; Ahnert, C; Gomez Santamaria, J; Rodriguez Olabarria, I

    1985-07-01

    Description of the theory and users manual of the MELON-3, CONCON and CONAXI codes, which are part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. These auxiliary codes, provide some of the input data for the main module SIMULA-3; these are, the reactivity correlations constants, the albe does and the transport factors. (Author) 7 refs.

  13. Author's Response to Commentaries on: "An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics"

    Molenaar, Peter C. M.

    2015-01-01

    In this article, Peter Molenaar responds to three commentaries (this issue) on his article, "An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics." He addresses aspects of relational developmental systems (RDS) mentioned and questions raised in each of the…

  14. 10 CFR Appendix III to Part 960 - Application of the System and Technical Guidelines During the Siting Process

    2010-01-01

    ... 960—Application of the System and Technical Guidelines During the Siting Process 1. This appendix... 10 Energy 4 2010-01-01 2010-01-01 false Application of the System and Technical Guidelines During the Siting Process III Appendix III to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE...

  15. 7 CFR 1951.232 - Water and waste disposal systems which have become part of an urban area.

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Water and waste disposal systems which have become... Water and waste disposal systems which have become part of an urban area. A water and/or waste disposal.... The following will be forwarded to the Administrator, Attention: Water and Waste Disposal Division...

  16. LOLA SYSTEM: A code block for nodal PWR simulation. Part. II - MELON-3, CONCON and CONAXI Codes

    Aragones, J. M.; Ahnert, C.; Gomez Santamaria, J.; Rodriguez Olabarria, I.

    1985-01-01

    Description of the theory and users manual of the MELON-3, CONCON and CONAXI codes, which are part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. These auxiliary codes, provide some of the input data for the main module SIMULA-3; these are, the reactivity correlations constants, the albe does and the transport factors. (Author) 7 refs

  17. 33 CFR 149.419 - Can the water supply for the helicopter deck fire protection system be part of a fire water system?

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Can the water supply for the... § 149.419 Can the water supply for the helicopter deck fire protection system be part of a fire water system? (a) The water supply for the helicopter deck fire protection system required under § 149.420 or...

  18. “PROCESS”: A systems code for fusion power plants—Part 1: Physics

    Kovari, M., E-mail: michael.kovari@ccfe.ac.uk; Kemp, R.; Lux, H.; Knight, P.; Morris, J.; Ward, D.J.

    2014-12-15

    Highlights: • PROCESS is a fusion reactor systems code. • It optimises a figure of merit subject to constraints chosen by the user. • CCFE are working to make the assumptions and equations explicit and public. • The PROCESS homepage is (www.ccfe.ac.uk/powerplants.aspx). - Abstract: PROCESS is a reactor systems code – it assesses the engineering and economic viability of a hypothetical fusion power station using simple models of all parts of a reactor system, from the basic plasma physics to the generation of electricity. It has been used for many years, but details of its operation have not been previously published. This paper describes some of its capabilities. PROCESS is usually used in optimisation mode, in which it finds a set of parameters that maximise (or minimise) a figure of merit chosen by the user, while being consistent with the inputs and the specified constraints. Because the user can apply all the physically relevant constraints, while allowing a large number of parameters to vary, it is in principle only necessary to run the code once to produce a self-consistent, physically plausible reactor model. The scope of PROCESS is very wide and goes well beyond reactor physics, including conversion of heat to electricity, buildings, and costs, but this paper describes only the plasma physics and magnetic field calculations. The capabilities of PROCESS in plasma physics are limited, as its main aim is to combine engineering, physics and economics. A model is described which shows the main plasma features of an inductive ITER scenario. Significant differences between the PROCESS results and the published scenario include the bootstrap current and loop voltage. The PROCESS models for these are being revised. Two new models for DEMO have been obtained. The first, DEMO A, is intended to be “conservative” in that it might be possible to build it using the technology of the near future. For example, since current drive technologies are not yet

  19. The past that was differs little from the past that was not: Pictographs and Petroglyphs in Cormac McCarthys Blood Meridian or the Evening Redness in the West

    Dilg, Cami Ann

    2017-01-01

    This literary analysis expands the scholarly canon concerning Cormac McCarthy’s regional writing by identifying the purpose of pictographs and petroglyphs in Blood Meridian or the Evening Redness in the West (1985). Not only do pictographs and petroglyphs tie the narrative to place, but they create a commentary regarding the erasure of Native American histories in the United States. These images record Native American memory and presence in the landscape, and by referencing them, McCarthy con...

  20. Examining the Electric Fields of the Evening Equatorial Ionosphere When the Solar Terminator is Aligned and Not Aligned with the Magnetic Meridian

    Eccles, J. V.

    2014-12-01

    The electric field structure of the equatorial ionosphere near sunset has implications on the development of plasma irregularities. The details of the development of the electric fields are examined using a global ionosphere-electrodynamics model. The results of simulations of simplified conditions show the influence of the arrangement of the solar terminator with the magnetic meridian. The relationships of the Curl-Free mechanism, the Hall Current Divergence mechanism, and the role of the Equatorial Electorjet region control the magnitude and timing of the Prereversal Enhancement of the zonal electric field as well as its altitude profile above the F region bottomside. Realistic conditions for 'equinox' and 'solstice' solar terminator arrangments are presented. The stability of the low-latitude ionosphere has a demonstrated relationship with the solar terminator alignment [Tsunoda, JGR, 1981]. The profile of the vertical and zonal electric field below the bottomside is then examined using the global model to explore the controlling elements of the electric field structure and the growth rates of the Rayleigh-Taylor instability and Collisional Shear instability.Tsunoda, R. T. (1985), Control of the seasonal and longitudinal occurrence of equatorial scintillations by the longitudinal gradient in integrated E region Pedersen conductivity, J. Geophys. Res., 90(A1),447-456, doi:10.1029/JA090iA01p00447.

  1. Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems. Part 1, Bulk Phase. Part 1; Bulk Phase

    Roman, Monsi C.; Mittelman, Marc W.

    2010-01-01

    The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the mid 1980s, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in open, semi-closed and closed loop life support system. The biofilm and biodeterioration studies that were performed during the design and test periods will be presented in

  2. Routes to chaos in continuous mechanical systems. Part 1: Mathematical models and solution methods

    Awrejcewicz, J.; Krysko, V.A.; Papkova, I.V.; Krysko, A.V.

    2012-01-01

    In this work chaotic dynamics of continuous mechanical systems such as flexible plates and shallow shells is studied. Namely, a wide class of the mentioned objects is analyzed including flexible plates and cylinder-like panels of infinite length, rectangular spherical and cylindrical shells, closed cylindrical shells, axially symmetric plates, as well as spherical and conical shells. The considered problems are solved by the Bubnov–Galerkin and higher approximation Ritz methods. Convergence and validation of those methods are studied. The Cauchy problems are solved mainly by the fourth Runge-Kutta method, although all variants of the Runge-Kutta methods are considered. New scenarios of transition from regular to chaotic orbits are detected, analyzed and discussed. First part of the paper is devoted to the validation of results obtained. This is why the same infinite length problem is reduced to that of a finite dimension through the FDM (Finite Difference Method) with the approximation order of O(c 2 ), BGM (Bubnov–Galerkin Method) or RM (Ritz Method) with higher approximations. We pay attention not only to convergence of the mentioned methods regarding the number of partitions of the interval [0, 1] in the FDM or regarding the number of terms in the series applied either in the BGM or RM methods, but we also compare the results obtained via the mentioned different approaches. Furthermore, a so called practical convergence of different Runge-Kutta type methods are tested starting from the second and ending with the eighth order. Second part of the work is devoted to a study of routes to chaos in the so far mentioned mechanical objects. For this purpose the so-called “dynamical charts” are constructed versus control parameters {q 0 , ω p }, where q 0 denotes the loading amplitude, and ω p is the loading frequency. The charts are constructed through analyses of frequency power spectra and the largest Lyapunov exponent (LE). Analysis of the mentioned charts

  3. Building a Culture of Continuous Improvement and Employee Engagement Using a Daily Management System Part 1: Overview.

    Maurer, Marsha; Canacari, Elena; Eng, Kimberly; Foley, Jane; Phelan, Cynthia; Sulmonte, Kimberlyann; Wandel, Jane

    2018-03-01

    A daily management system (DMS) can be used to implement continuous quality improvement and advance employee engagement. It can empower staff to identify problems in the care environment that impact quality or workflow and to address them on a daily basis. Through DMS, improvement becomes the work of everyone, every day. The authors of this 2-part series describe their work to develop a DMS. Part 1 describes the background and organizing framework of the program.

  4. A Framework for Developing and Sustaining a Part C Finance System. NECTAC Notes. Issue No. 23

    Greer, Maureen; Taylor, Anne; Andrews, Susan D. Mackey

    2007-01-01

    Typically, Federal entitlement statutes reflect a traditional program approach, with separate program funds attached to the legislative intent. The Part C provisions of Public Law (PL) 99-457, the Individuals with Disabilities Education Act (IDEA), however, were envisioned by Congress in an unprecedented manner. Part C legislation was designed to…

  5. MIGRE: an Expert System as an aid for loose part diagnosis and mechanical shocks interpretation in nuclear plant

    Monnier, B.; Puyal, C.; Fernandes, A.; Martin, C.

    1990-01-01

    This paper presents an application of the expert system technique to one of the functions which participate to the surveillance of the primary circuit of water-pressurized reactors: the detection of loose parts and the interpretation of mechanical shocks. First, we describe the domain of expertise and the context in which this expert system will be used. Then we deal with the principles and the different levels involved in the knowledge modeling and with the structure of the expert system

  6. Control of uncertain systems by feedback linearization with neural networks augmentation. Part II. Controller validation by numerical simulation

    Adrian TOADER

    2010-09-01

    Full Text Available The paper was conceived in two parts. Part I, previously published in this journal, highlighted the main steps of adaptive output feedback control for non-affine uncertain systems, having a known relative degree. The main paradigm of this approach was the feedback linearization (dynamic inversion with neural network augmentation. Meanwhile, based on new contributions of the authors, a new paradigm, that of robust servomechanism problem solution, has been added to the controller architecture. The current Part II of the paper presents the validation of the controller hereby obtained by using the longitudinal channel of a hovering VTOL-type aircraft as mathematical model.

  7. SPRINT 4 C, instant programming system. Part I: the language; Part II: the system (implemented on the CAE 90-40)

    Cavadia, Izvoras Cristian

    1969-01-01

    SPRINT 4 C is an original system intended for real-time operation on present day computers. It takes into account the specific properties of this kind of process and may be used without any special programming knowledge. Man and machine are continuously interacting since after each statement the system is executing all the computations made possible by the current set of previously introduced definitions. Syntax and semantic errors are detected as soon as they appear. The incorrect statement is eliminated, thus allowing for corrections or improvements. The computation is evolutive, i. e. all the already existing expressions, and/or all those to be defined later, may be used to create new structures. The statements may be read in through the typewriter, the card reader or the paper tape reader attached to the computer, the results being printed on the typewriter or on the line printer. The I/O device connections are possible at any time by means of typed commands. The two modes: 'parameter modification' and 'computation proceeding' allow the user to study the mathematical structure behaviour for different sets of data and then to go on developing the structure by adding new expressions. (author) [fr

  8. Adaptación española del "International Affective Picture System" (IAPS: tercera parte

    Javier Moltó

    2013-10-01

    Full Text Available Este trabajo proporciona los valores normativos españoles de las 358 imágenes que forman los conjuntos 15 a 20 del International Affective Picture System (IAPS. En este estudio participaron 811 estudiantes universitarios (521 mujeres que evaluaron las imágenes en las dimensiones emocionales de valencia, activación y dominancia. Las correlaciones entre las evaluaciones estadounidenses y las españolas en todas las dimensiones fueron altamente significativas y, como en Estados Unidos, la distribución de las imágenes en el espacio bidimensional afectivo definido por las dimensiones de valencia y activación adoptó la típica forma de boomerang. Los resultados confirmaron, asimismo, las diferencias de género encontradas en Estados Unidos en las evaluaciones de las imágenes aversivas. Estos resultados son totalmente consistentes con los obtenidos en la primera y segunda parte de la adaptación española, y demuestran que la estandarización del IAPS en nuestro país ha sido adecuada. Por último, se ratificaron las pequeñas diferencias transculturales encontradas en las evaluaciones de activación y dominancia: los españoles tendieron a asignar a las imágenes mayores puntuaciones en activación y menores en dominancia que los estadounidenses. Estos datos apoyan los estereotipos culturales de estos países y sugieren que el IAPS podría ser un indicador fiable de diferencias transculturales en la disposición emocional.

  9. Generating Vegetation Leaf Area Index Earth System Data Record from Multiple Sensors. Part 1; Theory

    Ganguly, Sangram; Schull, Mitchell A.; Samanta, Arindam; Shabanov, Nikolay V.; Milesi, Cristina; Nemani, Ramakrishna R.; Knyazikhin, Yuri; Myneni, Ranga B.

    2008-01-01

    The generation of multi-decade long Earth System Data Records (ESDRs) of Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation absorbed by vegetation (FPAR) from remote sensing measurements of multiple sensors is key to monitoring long-term changes in vegetation due to natural and anthropogenic influences. Challenges in developing such ESDRs include problems in remote sensing science (modeling of variability in global vegetation, scaling, atmospheric correction) and sensor hardware (differences in spatial resolution, spectral bands, calibration, and information content). In this paper, we develop a physically based approach for deriving LAI and FPAR products from the Advanced Very High Resolution Radiometer (AVHRR) data that are of comparable quality to the Moderate resolution Imaging Spectroradiometer (MODIS) LAI and FPAR products, thus realizing the objective of producing a long (multi-decadal) time series of these products. The approach is based on the radiative transfer theory of canopy spectral invariants which facilitates parameterization of the canopy spectral bidirectional reflectance factor (BRF). The methodology permits decoupling of the structural and radiometric components and obeys the energy conservation law. The approach is applicable to any optical sensor, however, it requires selection of sensor-specific values of configurable parameters, namely, the single scattering albedo and data uncertainty. According to the theory of spectral invariants, the single scattering albedo is a function of the spatial scale, and thus, accounts for the variation in BRF with sensor spatial resolution. Likewise, the single scattering albedo accounts for the variation in spectral BRF with sensor bandwidths. The second adjustable parameter is data uncertainty, which accounts for varying information content of the remote sensing measurements, i.e., Normalized Difference Vegetation Index (NDVI, low information content), vs. spectral BRF (higher

  10. the GFCE-Meridian Good Practice Guide on Critical Information Infrastructure Protection for governmental policy-makers

    Luiijf, H.A.M.; Schie, T.C.C. van; Ruijven, T.W.J. van; Huistra, A.W.W.

    2016-01-01

    Critical Information Infrastructure Protection (CIIP) is a complex but important topic for nations. Nations at large critically depend on Critical Infrastructure (CI) services such as energy supply, telecommunications, financial systems, drinking water, and governmental services. Critical

  11. Policy challenges for the pediatric rheumatology workforce: Part II. Health care system delivery and workforce supply.

    Henrickson, Michael

    2011-01-01

    The United States pediatric population with chronic health conditions is expanding. Currently, this demographic comprises 12-18% of the American child and youth population. Affected children often receive fragmented, uncoordinated care. Overall, the American health care delivery system produces modest outcomes for this population. Poor, uninsured and minority children may be at increased risk for inferior coordination of services. Further, the United States health care delivery system is primarily organized for the diagnosis and treatment of acute conditions. For pediatric patients with chronic health conditions, the typical acute problem-oriented visit actually serves as a barrier to care. The biomedical model of patient education prevails, characterized by unilateral transfer of medical information. However, the evidence basis for improvement in disease outcomes supports the use of the chronic care model, initially proposed by Dr. Edward Wagner. Six inter-related elements distinguish the success of the chronic care model, which include self-management support and care coordination by a prepared, proactive team. United States health care lacks a coherent policy direction for the management of high cost chronic conditions, including rheumatic diseases. A fundamental restructure of United States health care delivery must urgently occur which places the patient at the center of care. For the pediatric rheumatology workforce, reimbursement policies and the actions of health plans and insurers are consistent barriers to chronic disease improvement. United States reimbursement policy and overall fragmentation of health care services pose specific challenges for widespread implementation of the chronic care model. Team-based multidisciplinary care, care coordination and self-management are integral to improve outcomes. Pediatric rheumatology demand in the United States far exceeds available workforce supply. This article reviews the career choice decision-making process

  12. Policy challenges for the pediatric rheumatology workforce: Part II. Health care system delivery and workforce supply

    Henrickson Michael

    2011-08-01

    Full Text Available Abstract The United States pediatric population with chronic health conditions is expanding. Currently, this demographic comprises 12-18% of the American child and youth population. Affected children often receive fragmented, uncoordinated care. Overall, the American health care delivery system produces modest outcomes for this population. Poor, uninsured and minority children may be at increased risk for inferior coordination of services. Further, the United States health care delivery system is primarily organized for the diagnosis and treatment of acute conditions. For pediatric patients with chronic health conditions, the typical acute problem-oriented visit actually serves as a barrier to care. The biomedical model of patient education prevails, characterized by unilateral transfer of medical information. However, the evidence basis for improvement in disease outcomes supports the use of the chronic care model, initially proposed by Dr. Edward Wagner. Six inter-related elements distinguish the success of the chronic care model, which include self-management support and care coordination by a prepared, proactive team. United States health care lacks a coherent policy direction for the management of high cost chronic conditions, including rheumatic diseases. A fundamental restructure of United States health care delivery must urgently occur which places the patient at the center of care. For the pediatric rheumatology workforce, reimbursement policies and the actions of health plans and insurers are consistent barriers to chronic disease improvement. United States reimbursement policy and overall fragmentation of health care services pose specific challenges for widespread implementation of the chronic care model. Team-based multidisciplinary care, care coordination and self-management are integral to improve outcomes. Pediatric rheumatology demand in the United States far exceeds available workforce supply. This article reviews the career

  13. Relative translucency of six all-ceramic systems. Part II: core and veneer materials.

    Heffernan, Michael J; Aquilino, Steven A; Diaz-Arnold, Ana M; Haselton, Debra R; Stanford, Clark M; Vargas, Marcos A

    2002-07-01

    STATEMENT OF PROBLEM All-ceramic core materials with various strengthening compositions have a range of translucencies. It is unknown whether translucency differs when all-ceramic materials are fabricated similarly to the clinical restoration with a veneered core material. This study compared the translucency of 6 all-ceramic materials veneered and glazed at clinically appropriate thicknesses. Core specimens (n = 5 per group) of Empress dentin, Empress 2 dentin, In-Ceram Alumina, In-Ceram Spinell, In-Ceram Zirconia, and Procera AllCeram were fabricated as described in Part I of this study and veneered with their corresponding dentin porcelain to a final thickness of 1.47 +/- 0.01 mm. These specimens were compared with veneered Vitadur Alpha opaque dentin (as a standard), a clear glass disc (positive control), and a high-noble metal-ceramic alloy (Porc. 52 SF) veneered with Vitadur Omega dentin (negative control). Specimen reflectance was measured with an integrating sphere attached to a spectrophotometer across the visible spectrum (380 to 700 nm); 0-degree illumination and diffuse viewing geometry were used. Measurements were repeated after a glazing cycle. Contrast ratios were calculated from the luminous reflectance (Y) of the specimens with a black (Yb) and a white backing (Yw) to give Yb/Yw with CIE illuminant D65 and a 2-degree observer function (0.0 = transparent, 1.0 = opaque). One-way analysis of variance and Tukey's multiple-comparison test were used to analyze the data (P<.05). Significant differences in contrast ratios were found among the ceramic systems tested when they were veneered (P<.0001) and after the glazing cycle (P<.0001). Significant changes in contrast ratios (P<.0001) also were identified when the veneered specimens were glazed. Within the limitations of this study, a range of translucency was identified in the veneered all-ceramic systems tested. Such variability may affect their ability to match natural teeth. The glazing cycle resulted

  14. On solution of Maxwell's equations in axisymmetric domains with edges. Part I: Theoretical aspects

    Nkemzi, Boniface

    2003-10-01

    In this paper we present the basic mathematical tools for treating boundary value problems for the Maxwell's equations in three-dimensional axisymmetric domains with reentrant edges by means of partial Fourier analysis. We consider the decomposition of the classical and regularized time-harmonic three-dimensional Maxwell's equations into variational equations in the plane meridian domain of the axisymmetric domain and define suitable weighted Sobolev spaces for their treatment. The trace properties of these spaces on the rotational axis and some properties of the solutions are proved, which are important for further numerical treatment, e.g. by the finite-element method. Particularly, a priori estimates of the solutions of the reduced system are given and the asymptotic behavior of these solutions near reentrant corners of the meridian domain is explicitly described by suitable singular functions. (author)

  15. Loose parts, vibration and leakage monitoring methods and systems to increase availability, transparency and lifetime of power plants

    Streicher, V.; Jax, P.; Ruthrof, K.

    1987-01-01

    This paper deals with three stand-alone-systems as an aid to check the mechanical integrity of the primary circuit of nuclear power plants. The main goals of these systems are early detection of faults and malfunctions, the facilitation of fault clearance, the avoidance of sequential damage and reduction of inspection time and cost. Obviously the proper application of the systems as well as the measures they induce and make possible increase the availability of the plant and contribute to lifetime extension. In order to detect, identify and pinpoint the changes in component structure such as loosened connections, broken parts or components, loose or loosened particles, fatigued materials, cracks and leaks, specialized monitoring systems were developed by KWU (Kraftwerk Union AG) during the last ten years. Requirements concerning vibration, loose parts and leakage monitoring are part of German guidelines and safety standards. Therefore systems for these applications are implemented in most of the nuclear power plants in Western Germany. This paper presents newly developed, microprocessor-based systems for loose parts monitoring, vibration monitoring and leakage monitoring and also includes specific case histories for the different topics

  16. The estimation possibility of cleaning from radionuclides for the coast parts of drainage system by the soil fractionating method

    Karlin, Y.V.; Chuikov, V.Y.; Belianina, N.G.; Barinov, A.S.

    1996-01-01

    In this paper is considered the possibility of the cleaning from the radionuclides for the coast parts of the drainage system at the Moscow SIA open-quotes Radonclose quotes by the soil fractionating treatment. It is showed that this method cannot to be used for the cleaning of the soils near water flowing (a river, a spring or a open drainage system) because the most part of the soil size-fractions is the fine fractions and the main contaminant radionuclide ( 137 Cs) is distributed among the different soil components homogeneously

  17. An expert system for process planning of sheet metal parts produced ...

    Sachin Salunkhe

    set of production rules and frames for process planning of axisymmetric deep ... parameters for design of stamping die for manufacturing of circular cup with ..... proper sequence of operations to manufacture sheet metal part correctly and ...

  18. Monitoring of the thermal deformations on polymer parts using a vision system

    Dalla Costa, Giuseppe; Madruga, Daniel González; De Chiffre, Leonardo

    2017-01-01

    Dimensional measurements in production environment are affected by non‐controlled temperature conditions. In the case of polymer parts the high thermal expansion coefficient leads to significant dimensional changes. In order to achieve high accuracy in dimensional measurements, thermal deformatio...

  19. Environmental assessment of three egg production systems–Part I: Monitoring system and indoor air quality

    Zhao, Y.; Shepherd, T. A.; Li, H.; Xin, H.

    2015-01-01

    To comprehensively assess conventional vs. some alternative laying-hen housing systems under U.S. production conditions, a multi-institute and multi-disciplinary project, known as the Coalition for Sustainable Egg Supply (CSES) study, was carried out at a commercial egg production farm in the Midwestern United States over two single-cycle production flocks. The housing systems studied include a conventional cage house (200,000 hen capacity), an aviary house (50,000 hen capacity), and an enriched colony house (50,000 hen capacity). As an integral part of the CSES project, continual environmental monitoring over a 27-month period described in this paper quantifies indoor gaseous and particulate matter concentrations, thermal environment, and building ventilation rate of each house. Results showed that similar indoor thermal environments in all three houses were maintained through ventilation management and environmental control. Gaseous and particulate matter concentrations of the enriched colony house were comparable with those of the conventional cage house. In comparison, the aviary house had poorer indoor air quality, especially in wintertime, resulting from the presence of floor litter (higher ammonia levels) and hens’ activities (higher particulate matter levels) in it. Specifically, daily mean indoor ammonia concentrations had the 95% confidence interval values of 3.8 to 4.2 (overall mean of 4.0) ppm for the conventional cage house; 6.2 to 7.2 (overall mean of 6.7) ppm for the aviary house; and 2.7 to 3.0 (overall mean of 2.8) ppm for the enriched colony house. The 95% confidence interval (overall mean) values of daily mean indoor carbon dioxide concentrations were 1997 to 2170 (2083) ppm for the conventional cage house, 2367 to 2582 (2475) ppm for the aviary house, and 2124 to 2309 (2216) ppm for the enriched colony house. Daily mean indoor methane concentrations were similar for all three houses, with 95% confidence interval values of 11.1 to 11.9 (overall

  20. Event Processing and Variable Part of Sample Period Determining in Combined Systems Using GA

    Strémy, Maximilián; Závacký, Pavol; Jedlička, Martin

    2011-01-01

    This article deals with combined dynamic systems and usage of modern techniques in dealing with these systems, focusing particularly on sampling period design, cyclic processing tasks and related processing algorithms in the combined event management systems using genetic algorithms.

  1. Automated process control system for heat-treating nuclear power station parts

    Afanasiadi, N.G.; Demin, V.P.; Launin, B.N.

    1984-01-01

    The basic factors determining the need for an automated process control system (APCS) are discussed, as are system requirements. The basic tasks solved by the system are discussed. The functional scheme for a decentralized, two-level APCS is given

  2. Method for evaluating the system instrumentation for loose part detection in the primary cooling circuit of French PWRs

    Gerardin, J.P.; Donnette, J.E.

    1995-05-01

    The purpose of the loose part detection system is to trigger an alarm whenever it is warranted, to localize, and to provide information on the type of loose part involved and the damages it may provoke. It is therefore indispensable to have efficient instrumentation, beginning with the sensors which must provide us with a response to all mechanical impacts in natural trapping areas (reactor vessel and steam generator water box). A series of mass- and energy-calibrated impacts have been generated on 45 points in the primary cooling system of a nuclear plant unit in the startup phase. This test provided insights into the relationship between sensor signals and various impact parameters such as velocity of impact or loose part mass. Once these parameters were known, it was possible to define a method for evaluating the detection threshold of sensors depending on the way they are mounted. (author)

  3. Meeting the challenge of managed care - Part III: Information systems for radiation oncology practice

    Kijewski, Peter

    1997-01-01

    Purpose: This course will review topics to be considered when defining an information systems plan for a department of radiation oncology. A survey of available systems will be presented. Computer information systems can play an important role in the effective administration and operation of a department of radiation oncology. Tasks such as 1) scheduling for physicians, patients, and rooms, 2) charge collection and billing, 3) administrative reporting, and 4) treatment verification can be carried out efficiently with the assistance of computer systems. Operating a department without a state of art computer system will become increasingly difficult as hospitals and healthcare buyers increasingly rely on computer information technology. Communication of the radiation oncology system with outside systems will thus further enhance the utility of the computer system. The steps for the selection and installation of an information system will be discussed: 1) defining the objectives, 2) selecting a suitable system, 3) determining costs, 4) setting up maintenance contracts, and 5) planning for future upgrades

  4. IUPAC-NIST Solubility Data Series. 95. Alkaline Earth Carbonates in Aqueous Systems. Part 2. Ca

    Vanderdeelen, Jan

    2012-06-01

    The alkaline earth carbonates are an important class of minerals. This article is part of a volume in the IUPAC-NIST Solubility Data Series that compiles and critically evaluates solubility data of the alkaline earth carbonates in water and in simple aqueous electrolyte solutions. Part 1 outlined the procedure adopted in this volume, and presented the beryllium and magnesium carbonates. Part 2, the current paper, compiles and critically evaluates the solubility data of calcium carbonate. The chemical forms included are the anhydrous CaCO3 types calcite, aragonite, and vaterite, the monohydrate monohydrocalcite (CaCO3. H2O), the hexahydrate ikaite (CaCO3.6H2O), and an amorphous form. The data were analyzed with two model variants, and thermodynamic data of each form consistent with each of the models and with the CODATA key values for thermodynamics are presented.

  5. IUPAC-NIST Solubility Data Series. 95. Alkaline Earth Carbonates in Aqueous Systems. Part 2. Ca

    De Visscher, Alex; Vanderdeelen, Jan

    2012-01-01

    The alkaline earth carbonates are an important class of minerals. This article is part of a volume in the IUPAC-NIST Solubility Data Series that compiles and critically evaluates solubility data of the alkaline earth carbonates in water and in simple aqueous electrolyte solutions. Part 1 outlined the procedure adopted in this volume, and presented the beryllium and magnesium carbonates. Part 2, the current paper, compiles and critically evaluates the solubility data of calcium carbonate. The chemical forms included are the anhydrous CaCO 3 types calcite, aragonite, and vaterite, the monohydrate monohydrocalcite (CaCO 3 · H 2 O), the hexahydrate ikaite (CaCO 3 ·6H 2 O), and an amorphous form. The data were analyzed with two model variants, and thermodynamic data of each form consistent with each of the models and with the CODATA key values for thermodynamics are presented.

  6. IUPAC-NIST Solubility Data Series. 95. Alkaline Earth Carbonates in Aqueous Systems. Part 2. Ca

    De Visscher, Alex; Vanderdeelen, Jan [Department of Chemical and Petroleum Engineering, and Centre for Environmental Engineering Research and Education (CEERE), Schulich School of Engineering, University of Calgary, Calgary, Alberta, T2N 1N4 (Canada); Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, B-9000 Ghent (Belgium)

    2012-06-15

    The alkaline earth carbonates are an important class of minerals. This article is part of a volume in the IUPAC-NIST Solubility Data Series that compiles and critically evaluates solubility data of the alkaline earth carbonates in water and in simple aqueous electrolyte solutions. Part 1 outlined the procedure adopted in this volume, and presented the beryllium and magnesium carbonates. Part 2, the current paper, compiles and critically evaluates the solubility data of calcium carbonate. The chemical forms included are the anhydrous CaCO{sub 3} types calcite, aragonite, and vaterite, the monohydrate monohydrocalcite (CaCO{sub 3}{center_dot} H{sub 2}O), the hexahydrate ikaite (CaCO{sub 3}{center_dot}6H{sub 2}O), and an amorphous form. The data were analyzed with two model variants, and thermodynamic data of each form consistent with each of the models and with the CODATA key values for thermodynamics are presented.

  7. Aesthetic Education of Primary School Pupils as an Integral Part of the National System of Continuous Art Education in Japan

    Kuchai, Tetiana

    2014-01-01

    The article examines aesthetic education of primary school pupils as an integral part of the national system of continuous art education in Japan. One of the most important traditional means of aesthetic education in Japan, according to L. Tsaryova is considered nature. Analysis of the scientific literature by domestic and foreign scientists…

  8. An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems.

    Bouwman, R.; Young, K.; Lazzari, B.; Ravaglia, V.; Broeders, M.J.M.; Engen, R. van

    2009-01-01

    According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does

  9. 33 CFR Appendix E to Part 157 - Specifications for the Design, Installation and Operation of a Part Flow System for Control of...

    2010-07-01

    ... established by the Administration and which shall at least contain all the provisions of these Specifications. 2.2The part flow concept is based on the principle that the observation of a representative part... arrangements acceptable to the Administration. 3.3The display of the part flow shall be arranged in a sheltered...

  10. Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio wing. Part 2: Appendices

    Mcgehee, C. R.

    1986-01-01

    This is Part 2-Appendices of a study conducted under Drones for Aerodynamic and Structural Testing (DAST) Program to accomplish the final design and hardware fabrication for four active control systems compatible with and ready for installation in the NASA Aeroelastic Research Wing No. 2 (ARW-2) and Firebee II drone flight test vehicle. The wing structure was designed so that Active Control Systems (ACS) are required in the normal flight envelope by integrating control system design with aerodynamics and structure technologies. The DAST ARW-2 configuration uses flutter suppression, relaxed static stability, and gust and maneuver load alleviation ACS systems, and an automatic flight control system. Performance goals and criteria were applied to individual systems and the systems collectively to assure that vehicle stability margins, flutter margins, flying qualities, and load reductions were achieved.

  11. Benchmarking the performance of fixed-image receptor digital radiographic systems part 1: a novel method for image quality analysis.

    Lee, Kam L; Ireland, Timothy A; Bernardo, Michael

    2016-06-01

    This is the first part of a two-part study in benchmarking the performance of fixed digital radiographic general X-ray systems. This paper concentrates on reporting findings related to quantitative analysis techniques used to establish comparative image quality metrics. A systematic technical comparison of the evaluated systems is presented in part two of this study. A novel quantitative image quality analysis method is presented with technical considerations addressed for peer review. The novel method was applied to seven general radiographic systems with four different makes of radiographic image receptor (12 image receptors in total). For the System Modulation Transfer Function (sMTF), the use of grid was found to reduce veiling glare and decrease roll-off. The major contributor in sMTF degradation was found to be focal spot blurring. For the System Normalised Noise Power Spectrum (sNNPS), it was found that all systems examined had similar sNNPS responses. A mathematical model is presented to explain how the use of stationary grid may cause a difference between horizontal and vertical sNNPS responses.

  12. Quantifying the role of fire in the Earth systemPart 1: Improved global fire modeling in the Community Earth System Model (CESM1)

    F. Li; S. Levis; D. S. Ward

    2013-01-01

    Modeling fire as an integral part of an Earth system model (ESM) is vital for quantifying and understanding fire–climate–vegetation interactions on a global scale and from an Earth system perspective. In this study, we introduce to the Community Earth System Model (CESM) the new global fire parameterization proposed by Li et al. (2012a, b), now with a more realistic representation of the anthropogenic impacts on fires, with a parameterization of peat fires, and with other minor modifications....

  13. Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

    2013-04-12

    preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

  14. Automatic Color Sorting System for Hardwood Edge-Glued Panel Parts

    Richard W. Conners; D.Earl Kline; Philip A. Araman

    1996-01-01

    The color sorting of edge-glued panel parts is becoming more important in the manufacture of hardwood products. Consumers, while admiring the natural appearance of hardwoods, do not like excessive color variation across product surfaces. Color uniformity is particularly important today because of the popularity of lightly stained products. Unfortunately, color sorting...

  15. Scope Oriented Thermoeconomic analysis of energy systems. Part II: Formation Structure of Optimality for robust design

    Piacentino, Antonio; Cardona, Ennio

    2010-01-01

    This paper represents the Part II of a paper in two parts. In Part I the fundamentals of Scope Oriented Thermoeconomics have been introduced, showing a scarce potential for the cost accounting of existing plants; in this Part II the same concepts are applied to the optimization of a small set of design variables for a vapour compression chiller. The method overcomes the limit of most conventional optimization techniques, which are usually based on hermetic algorithms not enabling the energy analyst to recognize all the margins for improvement. The Scope Oriented Thermoeconomic optimization allows us to disassemble the optimization process, thus recognizing the Formation Structure of Optimality, i.e. the specific influence of any thermodynamic and economic parameter in the path toward the optimal design. Finally, the potential applications of such an in-depth understanding of the inner driving forces of the optimization are discussed in the paper, with a particular focus on the sensitivity analysis to the variation of energy and capital costs and on the actual operation-oriented design.

  16. Heating, Ventilation and Air-Conditioning Systems, Part of Indoor Air Quality Design Tools for Schools

    The main purposes of a Heating, Ventilation, and Air-Conditioning system are to help maintain good indoor air quality through adequate ventilation with filtration and provide thermal comfort. HVAC systems are among the largest energy consumers in schools.

  17. Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints

    Costantino, Francesco; Di Gravio, Giulio; Tronci, Massimo

    2013-01-01

    Inventory management of spare parts is one of the most critical issues in the aeronautical industry, given the required level of system availability related to the strategic importance and high stocking costs of the components. Even if a large number of spare parts increases warehousing costs, every single shortage have a greater impact: the adoption of best-in-class inventory management techniques becomes crucial. On these considerations, the paper presents an innovative model of spare parts allocation for the Italian Air Force with the aim of minimizing backorders and, at the same time, ensuring an availability of 99% depending on the actual flight plan. The model, solved by a marginal analysis, considers an original configuration of features combining different skills of maintenance centers in a hierarchical multi-echelon, multi-item, multi-indenture structure. A real case is provided in order to analyze the solving method and the results. -- Highlights: •We studied a problem of allocations for spare parts of aeronautical systems. •The model presents different repair capabilities of maintenance centers. •The model fits constraints on budget and on total operational availability. •The model is solved by a marginal analysis with a backorder/price ratio. •A numerical example shows a spare parts allocation with relative considerations

  18. Advanced Hard Real-Time Operating System, the Maruti Project. Part 2.

    1997-01-01

    Real - Time Operating System , The Maruti Project DASG-60-92-C-0055 5b. Program Element # 62301E 6. Author(s...The maruti hard real - time " operating system . A CM SIGOPS, Operating Systems Review. 23:90-106, July 1989. 254 !1 110) C. L. Liu and J. Layland...February 14, 1995 Abstract The Maruti Real - Time Operating System was developed for applications that must meet hard real-time constraints. In order

  19. Convergent piecewise affine systems : analysis and design Part II: discontinuous case

    Pavlov, A.V.; Pogromski, A.Y.; Wouw, van de N.; Nijmeijer, H.; Rooda, J.E.

    2005-01-01

    In this paper convergence properties of piecewise affine (PWA) systems with discontinuous right-hand sides are studied. It is shown that for discontinuous PWA systems existence of a common quadratic Lyapunov function is not sufficient for convergence. For discontinuous bimodal PWA systems necessary

  20. Proposed Framework which Uses Object Oriented Principles in Relational Systems: Structure and Formating (Part 2

    Catalin STRIMBEI

    2006-01-01

    Full Text Available Our approach tries to overcome the limitations of so called “flat nature” of relational systems, in the actual context of actual relational database theories, database systems technologies and object oriented methodologies by proposing an MDA framework to map an object oriented (UML formalized model to object-relational structures of today’s database systems.

  1. Space station systems analysis study. Part 2, Volume 2. [technical report

    1977-01-01

    Specific system options are defined and identified for a cost effective space station capable of orderly growth with regard to both function and orbit location. Selected program options are analyzed and configuration concepts are developed to meet objectives for the satellite power system, earth servicing, space processing, and supporting activities. Transportation systems are analyzed for both LEO and GEO orbits.

  2. Development of ITER PRM and standard parts catalogues in CATIA V5 for tritium-containing systems and components

    Lazar, Alin; Brad, Sebastian; Zamfirache, Marius; Soare, Sorin; Sofalca, Nicolae; Vijulie, Mihai

    2006-01-01

    CATIA V5 is a software chosen to perform the design and integration within ITER of both systems: fluid and mechanical systems. The broad range of applications provides the ability to develop the design process from the functional 2D design (P and ID) to the 3D plant layouts and detailed design. The 2D symbols for the equipment and piping components were developed in accordance with EN ISO 10628 standard, ISO 3511 (part I, II and IV) standard and DIN 28401 standard and considering the classification and settings done by FZK-team in the PRM-FZK-TLK in order to ensure compliance with the established design standards. These symbols were inserted in 2D catalogues linked with the main catalogue installed in PRM-FZK-TLK on CATIA SERVER at TLK-FZK and intensively tested in Piping and Instrumentation Diagrams. The 3D part for the equipment, instruments and piping components was developed according to the specifications, industrial conventions, terminology and literature available in library, internet and practice. All parts were parametrically built in order to allow the designer to modify the part geometry according to the design. The 3D parts were typed in accordance with IKARUS-Project Instructions by FZK team, inserted in 3D test catalogues and tested in Equipment and Systems workbench. The elements of P and ID, pipes, piping parts, instruments and equipment carry attribute information such as fluid type, pressure rating, insulation or material. The list of attributes is defined in the PRM and consists of the standard industrial attributes implemented by default in CATIA V5 and project specific attributes defined by Project Administration. 2D logical design and 3D Piping models are logically related through the common functions definition in the PRM. The task, TW5-TTFD-TPI-51, was performed collaboratively by MEdC/ICIT and FZK/TLK. (authors)

  3. Revised hydrogeologic framework of the Floridan aquifer system in Florida and parts of Georgia, Alabama, and South Carolina

    Williams, Lester J.; Kuniansky, Eve L.

    2015-04-08

    The hydrogeologic framework for the Floridan aquifer system has been revised throughout its extent in Florida and parts of Georgia, Alabama, and South Carolina. The updated framework generally conforms to the original framework established by the U.S. Geological Survey in the 1980s, except for adjustments made to the internal boundaries of the Upper and Lower Floridan aquifers and the individual higher and contrasting lower permeability zones within these aquifers. The system behaves as one aquifer over much of its extent; although subdivided vertically into two aquifer units, the Upper and Lower Floridan aquifers. In the previous framework, discontinuous numbered middle confining units (MCUI–VII) were used to subdivide the system. In areas where less-permeable rocks do not occur within the middle part of the system, the system was previously considered one aquifer and named the Upper Floridan aquifer. In intervening years, more detailed data have been collected in local areas, resulting in some of the same lithostratigraphic units in the Floridan aquifer system being assigned to the Upper or Lower Floridan aquifer in different parts of the State of Florida. Additionally, some of the numbered middle confining units are found to have hydraulic properties within the same order of magnitude as the aquifers. A new term “composite unit” is introduced for lithostratigraphic units that cannot be defined as either a confining or aquifer unit over their entire extent. This naming convention is a departure from the previous framework, in that stratigraphy is used to consistently subdivide the aquifer system into upper and lower aquifers across the State of Florida. This lithostratigraphic mapping approach does not change the concept of flow within the system. The revised boundaries of the Floridan aquifer system were mapped by considering results from local studies and regional correlations of lithostratigraphic and hydrogeologic units or zones. Additional zones within

  4. PART I – USUAL PROBLEMS OF OPTIMIZING THE ACTION SYSTEMS OFTHE BAND TRANSPORTERS

    Nicoleta-Maria MIHUT

    2012-05-01

    Full Text Available Most of the systems of electric action are non-linear systems, including the continuous transportsystems with band, that could be brought by linearization and negligence at the linear system. The latest news inthe field of static convertors, of the new transfer schemes of electric energy, make possible the analysis of theaction systems of the continuous transport installations with band as linearisable systems. For the linearisableaction systems described by state equations, there are two consecrated calculation methods of the optimaltrajectory of the system, the variational calculation and the Euler-Lagrange algorithm, as the latter one isconsidered by the specialty literature as an optimum generator, and the first one as an extremum generator. Butthe two methods need conditions reviewed enough in the Euler-Lagrange conditions

  5. Human error probability evaluation as part of reliability analysis of digital protection system of advanced pressurized water reactor - APR 1400

    Varde, P. V.; Lee, D. Y.; Han, J. B.

    2003-03-01

    A case of study on human reliability analysis has been performed as part of reliability analysis of digital protection system of the reactor automatically actuates the shutdown system of the reactor when demanded. However, the safety analysis takes credit for operator action as a diverse mean for tripping the reactor for, though a low probability, ATWS scenario. Based on the available information two cases, viz., human error in tripping the reactor and calibration error for instrumentations in protection system, have been analyzed. Wherever applicable a parametric study has also been performed

  6. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics, appendixes

    Hanley, G. M.

    1979-01-01

    Appendixes for Volume 2 (Part 2) of a seven volume Satellite (SPS) report are presented. The document contains two appendixes. The first is a SPS work breakdown structure dictionary. The second gives SPS cost estimating relationships and contains the cost analyses and a description of cost elements that comprise the SPS program.

  7. Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants

    Langenberg, Donald W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2012-12-01

    This report describes a typical LPMS, emphasizing its application to the RCS of a modern NPP. The report also examines the versatility of AE monitoring technology by describing several nuclear applications other than loose parts monitoring, as well as some non-nuclear applications. In addition, LPMS implementation requirements are outlined, and LPMS suppliers are identified. Finally, U.S. export controls applicable to LPMSs are discussed.

  8. Traffic Information Systems for Smart Mobility as part of Smart Cities

    Suske, David; Touko Tcheumadjeu, Louis Calvin; Sohr, Alexander; Xiaoxu, Bei

    2016-01-01

    The unlimited and unrestricted mobility of people and goods in urban areas is one of the key factors for economic and social development of the city. Today with the availability of smart technologies and various intelligent transportation and telematics solutions the Smart Mobility as part of a Smart City is possible to maintain the mobility ecosystem in the city. But to make the urban mobility smart by assuring the sustainability, safety, low emission and comfort in urban transport new mobil...

  9. Systems Analysis of Technologies for Energy Recovery from Waste. Part I. Gasification followed by Catalytic Combustion, PEM Fuel Cells and Solid Oxide Fuel Cells for Stationary Applications in Comparison with Incineration. Part - II. Catalytic combustion - Experimental part

    Assefa, Getachew; Frostell, Bjoern [Royal Inst. of Technology, Stockholm (Sweden). Div. of Industrial Ecology; Jaeraas, Sven; Kusar, Henrik [Royal Inst. of Technology, Stockholm (Sweden). Div. of Chemical Technology

    2005-02-01

    This project is entitled 'Systems Analysis: Energy Recovery from waste, catalytic combustion in comparison with fuel cells and incineration'. Some of the technologies that are currently developed by researchers at the Royal Institute of Technology include catalytic combustion and fuel cells as downstream units in a gasification system. The aim of this project is to assess the energy turnover as well as the potential environmental impacts of biomass/waste-to-energy technologies. In second part of this project economic analyses of the technologies in general and catalytic combustion and fuel cell technologies in particular will be carried out. Four technology scenarios are studied: (1) Gasification followed by Low temperature fuel cells (Proton Exchange Membrane (PEM) fuel cells) (2) Gasification followed by high temperature fuel cells (Solid Oxide Fuel Cells (SOFC) (3) Gasification followed by catalytic combustion and (4) Incineration with energy recovery. The waste used as feedstock is an industrial waste containing parts of household waste, paper waste, wood residues and poly ethene. In the study compensatory district heating is produced by combustion of biofuel. The power used for running the processes in the scenarios will be supplied by the waste-to-energy technologies themselves while compensatory power is assumed to be produced from natural gas. The emissions from the system studied are classified and characterised using methodology from Life Cycle Assessment in to the following environmental impact categories: Global Warming Potential, Acidification Potential, Eutrophication Potential and finally Formation of Photochemical Oxidants. Looking at the result of the four technology chains in terms of the four impact categories with impact per GWh electricity produced as a unit of comparison and from the perspective of the rank each scenario has in all the four impact categories, SOFC appears to be the winner technology followed by PEM and CC as second

  10. Systems Analysis of Technologies for Energy Recovery from Waste. Part I. Gasification followed by Catalytic Combustion, PEM Fuel Cells and Solid Oxide Fuel Cells for Stationary Applications in Comparison with Incineration. Part - II. Catalytic combustion - Experimental part

    Assefa, Getachew; Frostell, Bjoern; Jaeraas, Sven; Kusar, Henrik

    2005-02-01

    This project is entitled 'Systems Analysis: Energy Recovery from waste, catalytic combustion in comparison with fuel cells and incineration'. Some of the technologies that are currently developed by researchers at the Royal Institute of Technology include catalytic combustion and fuel cells as downstream units in a gasification system. The aim of this project is to assess the energy turnover as well as the potential environmental impacts of biomass/waste-to-energy technologies. In second part of this project economic analyses of the technologies in general and catalytic combustion and fuel cell technologies in particular will be carried out. Four technology scenarios are studied: (1) Gasification followed by Low temperature fuel cells (Proton Exchange Membrane (PEM) fuel cells) (2) Gasification followed by high temperature fuel cells (Solid Oxide Fuel Cells (SOFC) (3) Gasification followed by catalytic combustion and (4) Incineration with energy recovery. The waste used as feedstock is an industrial waste containing parts of household waste, paper waste, wood residues and poly ethene. In the study compensatory district heating is produced by combustion of biofuel. The power used for running the processes in the scenarios will be supplied by the waste-to-energy technologies themselves while compensatory power is assumed to be produced from natural gas. The emissions from the system studied are classified and characterised using methodology from Life Cycle Assessment in to the following environmental impact categories: Global Warming Potential, Acidification Potential, Eutrophication Potential and finally Formation of Photochemical Oxidants. Looking at the result of the four technology chains in terms of the four impact categories with impact per GWh electricity produced as a unit of comparison and from the perspective of the rank each scenario has in all the four impact categories, SOFC appears to be the winner technology followed by PEM and CC as second and third

  11. Systems and complexity thinking in general practice: part 1 - clinical application.

    Sturmberg, Joachim P

    2007-03-01

    Many problems encountered in general practice cannot be sufficiently explained within the Newtonian reductionist paradigm. Systems and complexity thinking - already widely adopted in most nonmedical disciplines - describes and explores the contextual nature of questions posed in medicine, and in general practice in particular. This article briefly describes the framework underpinning systems and complexity sciences. A case study illustrates how systems and complexity thinking can help to better understand the contextual nature of patient presentations, and how different approaches will lead to different outcomes.

  12. Proposed Framework which Uses Object Oriented Principles in Relational Systems: Structure and Formating (Part 2)

    Catalin STRIMBEI

    2006-01-01

    Our approach tries to overcome the limitations of so called “flat nature†of relational systems, in the actual context of actual relational database theories, database systems technologies and object oriented methodologies by proposing an MDA framework to map an object oriented (UML formalized) model to object-relational structures of today’s database systems.

  13. Microelectronic Status Analysis and Secondary Part Procureability Assessment of the HAWK Weapon System

    Maddux, Gary

    2000-01-01

    The MT Division, Engineering Directorate (ED), RDEC, AMCOM has the mission and function of providing microelectronic technology assessments, and producibility and supportability analyses for the HAWK weapon system...

  14. Microelectronic Status Analysis and Secondary Part Procureability Assessment of the HAWK Weapon System

    Maddux, Gary

    1999-01-01

    The Industrial Operations Division (IOD), SEPD, RDEC, AMCOM has the mission and function of providing microelectronic technology assessments, and producibility and supportability analyses for the HAWK weapon system...

  15. Static and transient characteristics of the shaft seal system for helium gas circulator (Part 1)

    Morohoshi, S.; Saki, K.; Nemoto, M.; Taniguchi, S.; Sugimoto, A.; Kojima, M.

    1982-01-01

    A development program of the shaft seal system for the helium circulator supported by water lubricated bearings is presented. A seal system simulating tester and a computer program which can simulate the transient characteristics of a buffer gas seal system were newly introduced, and an investigation was performed experimentally and analytically of the characteristics of water and gas seals and of the buffer gas seal system including the control system. Main results are as follows: (1) Water seals were especially investigated in detail, and it was found that turbulence in water flow through seal clearance and deformation of seal components affected the leakage characteristics of water seals. They should be considered not only to make safety design but also to get optimum design of the seal system. (2) The calculation method for transient response of the buffer gas seal system including the control system was developed. This digital simulating method can well simulate transients encountered in the tester, and it would make a powerful tool for developing a safe seal system under steady state operation conditions and at depressurization accidents in a reactor

  16. Connected Lighting Systems Efficiency Study$-$ PoE Cable Energy Losses, Part 1

    Tuenge, Jason [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelly, Karsten [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poplawski, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-11-30

    First report in a study of the efficiency of connected lighting systems. The report summarizes the results of an exploratory study investigating power losses in Ethernet cables used between PoE switches and luminaires in PoE connected lighting systems. Testing was conducted at the Pacific Northwest National Laboratory (PNNL) Connected Lighting Test Bed in September 2017. The results were analyzed to explore the impact of cable selection on PoE lighting system energy efficiency, as well as the effectiveness of guidelines recently introduced by the American National Standards Institute (ANSI) C137 Lighting Systems Committee.

  17. Recent changes in sediment redistribution in the upper parts of the fluvial system of European Russia: regional aspects

    O. P. Yermolaev

    2015-03-01

    Full Text Available Quantitative assessments of soil loss from cultivated land and sediment redistribution along pathways from cultivated fields to river channels have been undertaken using a range of different methods and techniques, including erosion models, detailed studies of sediment redistribution in representative catchments, monitoring of gully head retreat and evaluation of sediment deposition in ponds and small reservoirs. Most of the sediment eroded from arable land is deposited between the lower portions of the cultivated slopes and the river channels. Less than 15% of the eroded sediment is delivered to the river channels. Sediment redistribution rates in the upper parts of the fluvial system have declined during the last 25 years in both the western and eastern parts of the Russian Plain, because of a major reduction of surface runoff during snowmelt and a reduction of the area of arable land in some parts of the study area.

  18. State — Region — Field — Enterprise: Framework of Economics System Stability of Russia Part 2

    Georgy Borisovich Kleiner

    2015-09-01

    Full Text Available In the article, the factors of a stability of the Russian economy are investigated from the systematic positions as a multilevel, multisubject and multidimensional socio-economic system. The concept of economics system stability as abilities to keep prerequisites for growth with the support and effective use of system structure of economy is formulated. The leading role of all economic subjects of different levels (including government as a subject of the international relations, regions as the subjects of Federation, enterprises as economic entities in economic stability is shown. The need of "extension" of a network of subjects due to strengthening of the subjectivity of economic fields is emphasized. Research of an internal basic system structure of an economic subject and external structure of its immediate environment in socioeconomic, administrative-and-managerial, and market spaces with the use of the results of the new theory of economic systems leads to a conclusion of similarity of these structures. It is shown that each of these system complexes includes (together with a subject four systems of various types — object, environmental, processed, and designed. The system environment of a subject in the administrative-and-managerial space of inter-level interactions has the same structure. It gives the chance to reduce a problem of subjects’ resistance to a question of balance of system structures of the complexes forming an internal filling and an external environment of subjects. The method of balance index of similar complexes is given. Recommendations on a choice of the measures of economic policy for providing economics system stability of Russia during the crisis are formulated. It is shown that such policy has to be developed with the principles of a subject-preservation, system balance of internal filling and external environment of subjects, a corporate solidarity of subjects despite their level in the administrative

  19. State — Region — Field— Enterprise: Framework of Economics System Stability of Russia Part 1

    Georgy Borisovich Kleyner

    2015-06-01

    Full Text Available In the article, the factors of a stability of the Russian economy are investigated from the systematic positions as a multilevel, multisubject and multidimensional socio-economic system. The concept of economics system stability as abilities to keep prerequisites for growth with the support and effective use of system structure of economy is formulated. The leading role of all economic subjects of different levels (including government as a subject of the international relations, regions as subjects of Federation, enterprises as economic entities in economic stability is shown. The need of «extension» of a network of subjects due to strengthening of the subjectivity of economic fields is emphasized. Research of an internal basic system structure of an economic subject and external structure of its immediate environment in socioeconomic, administrative-and-managerial, and market spaces with the use of the results of the new theory of economic systems leads to a conclusion of similarity of these structures. It is shown that each of these system complexes includes (together with a subject four systems of various types — object, environmental, processed, and designed. The system environment of a subject in the administrative-and-managerial space of inter-level interactions has the same structure. It gives the chance to reduce a problem of subjects’ resistance to a question of balance of system structures of the complexes forming an internal filling and an external environment of subjects. The method of balance index of similar complexes is given. Recommendations on a choice of the measures of economic policy for providing economics system stability of Russia during the crisis are formulated. It is shown that such policy has to be developed with the principles of a subject-preservation, system balance of internal filling and external environment of subjects, a corporate solidarity of subjects despite their level in the administrative hierarchy

  20. AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT X, AUTOMATIC TRANSMISSIONS--HYDRAULIC SYSTEMS (PART II).

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO PROVIDE A SUMMARY OF MAINTENANCE PROCEDURES FOR AUTOMATIC TRANSMISSIONS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) CHECKING THE HYDRAULIC SYSTEM, (2) SERVICING THE HYDRAULIC SYSTEM, (3) EXAMINING THE RANGE CONTROL VALVE, (4) EXAMINING THE LOCK-UP AND FLOW VALVE, (5) EXAMINING THE MAIN REGULATOR…

  1. Visible Parts, Invisible Whole: Swedish Technology Student Teachers' Conceptions about Technological Systems

    Hallström, Jonas; Klasander, Claes

    2017-01-01

    Technological systems are included as a component of national technology curricula and standards for primary and secondary education as well as corresponding teacher education around the world. Little is known, however, of how pupils, students, and teachers conceive of technological systems. In this article we report on a study investigating…

  2. 32 CFR Appendix B to Part 323 - Criteria for New and Altered Record Systems

    2010-07-01

    .... The addition of peripheral devices such as tape devices, disk devices, card readers, printers, and similar devices to an existing ADP system constitute an amendment if system security is preserved. e... maintenance of the system” caption. 5. Changes that alter the computer environment (such as changes to...

  3. Computer-Assisted Career Guidance Systems: A Part of NCDA History

    Harris-Bowlsbey, JoAnn

    2013-01-01

    The first computer-assisted career planning systems were developed in the late 1960s and were based soundly on the best of career development and decision-making theory. Over the years, this tradition has continued as the technology that delivers these systems' content has improved dramatically and as they have been universally accepted as…

  4. Regenerating an Arsenic Removal Iron-Based Adsorptive Media System, Part 2: Performance and Cost

    The replacement of exhausted, adsorptive media used to remove arsenic from drinking water accounts for approximately 80% of the total operational and maintenance (O/M) costs of this commonly used small system technology. The results of three, full scale system studies of an on-s...

  5. 14 CFR Appendix M to Part 25 - Fuel Tank System Flammability Reduction Means

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel Tank System Flammability Reduction... 25—Fuel Tank System Flammability Reduction Means M25.1Fuel tank flammability exposure requirements. (a) The Fleet Average Flammability Exposure of each fuel tank, as determined in accordance with...

  6. 14 CFR Appendix E to Part 43 - Altimeter System Test and Inspection

    2010-01-01

    ... associated computing systems, or which incorporate air data correction internally, may be tested in a manner...) Automatic Pressure Altitude Reporting Equipment and ATC Transponder System Integration Test. The test must...). Measure the automatic pressure altitude at the output of the installed ATC transponder when interrogated...

  7. High efficient ammonia heat pump system for industrial process water using the ISEC concept. Part 1

    Rothuizen, Erasmus Damgaard; Madsen, C.; Elmegaard, Brian

    2014-01-01

    The purpose of the Isolated System Energy Charging (ISEC) is to provide a high-efficient ammonia heat pump system for hot water production. The ISEC concept uses two storage tanks for the water, one discharged and one charged. The charged tank is used for the industrial process while the discharged...... tank, is charging. Charging is done by circulating the water in the tank through the condenser several times and thereby gradually heats the water. This result in a lower condensing temperature than if the water was heated in one step. A dynamic model of the system, implemented in Dymola, is used...... to investigate the performance of the ISEC system. The ISEC concept approaches the efficiency of a number of heat pumps in series and the COP of the system may reach 6.8, which is up to 25 % higher than a conventional heat pump heating water in one step....

  8. Bioregenerative Life Support System Research as part of the DLR EDEN Initiative

    Bamsey, Matthew; Schubert, Daniel; Zabel, Paul; Poulet, Lucie; Zeidler, Conrad

    In 2011, the DLR Institute of Space Systems launched a research initiative called EDEN - Evolution and Design of Environmentally-closed Nutrition-Sources. The research initiative focuses on bioregenerative life support systems, especially greenhouse modules, and technologies for future crewed vehicles. The EDEN initiative comprises several projects with respect to space research, ground testing and spin-offs. In 2014, EDEN’s new laboratory officially opened. This new biological cleanroom laboratory comprises several plant growth chambers incorporating a number of novel controlled environment agriculture technologies. This laboratory will be the nucleus for a variety of plant cultivation experiments within closed environments. The utilized technologies are being advanced using the pull of space technology and include such items as stacked growth systems, PAR-specific LEDs, intracanopy lighting, aeroponic nutrient delivery systems and ion-selective nutrient sensors. The driver of maximizing biomass output per unit volume and energy has much application in future bioregenerative life support systems but can also provide benefit terrestrially. The EDEN laboratory also includes several specially constructed chambers for advancing models addressing the interaction between bioregenerative and physical-chemical life support systems. The EDEN team is presently developing designs for containerized greenhouse modules. One module is planned for deployment to the German Antarctic Station, Neumayer III. The shipping container based system will provide supplementation to the overwintering crew’s diet, provide psychological benefit while at the same time advancing the technology and operational readiness of harsh environment plant production systems. In addition to hardware development, the EDEN team has participated in several early phase designs such as for the ESA Greenhouse Module for Space System and for large-scale vertical farming. These studies often utilize the

  9. Computer program system for evaluation of FP nuclear data for JENDL. Smooth part

    Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Watanabe, Takashi; Iijima, Shungo

    1997-12-01

    This report describes computer programs used to evaluate nuclear data of fission product (FP) nuclides stored in an evaluated nuclear data library JENDL, especially in the smooth part above the resonance region. Many programs were used for determination of nuclear model parameters, calculation of nuclear data, handling of experimental and/or calculated data, and so on. Among them, reported here are programs for determination of level density parameters (ENSDFRET, LVLPLOT, LEVDES), for making sets of JCL and input data for the theoretical calculation program CASTHY (JOBSETTER, INDES/CASTHY), and for conversion of format of CASTHY output files to the ENDF format (CTOB2). (author). 51 refs.

  10. Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part II - An application

    Balli, Ozgur; Aras, Haydar; Hepbasli, Arif

    2010-01-01

    The paper is Part 2 of the study on the thermodynamic and thermoeconomic analyses of trigeneration system with a gas-diesel engine. In Part 1, thermodynamic and thermoeconomic methodologies for such a comprehensive analysis were provided, while this paper applies the developed methodology to an actual TRIGEN system with a rated output of 6.5 MW gas-diesel engine installed in the Eskisehir Industry Estate Zone, Turkey. Energy and exergy efficiencies, equivalent electrical efficiency, the Public Utility Regulatory Policies Act (PURPA) efficiency, fuel energy saving ratio, fuel exergy saving ratio and other thermodynamic performance parameters are determined for the TRIGEN system. The efficiencies of energy, exergy, PURPA and equivalent electrical efficiency of the entire system are found to be 58.97%, 36.13%, 45.7% and 48.53%, respectively. For the whole system and its components, exergetic cost allocations and various exergoeconomic performance parameters are calculated using the exergoeconomic analysis based on specific exergy costing method (SPECO). The specific unit exergetic cost of the net electrical power, heat energy in the Factory Heating Center (FHC) heating, heat energy in the Painting Factory Heating (PFH) and chilled water in the absorption chiller (ACh) produced by the TRIGEN system are obtained to be 45.94 US$/GJ, 29.98 US$/GJ, 42.42 US$/GJ and 167.52 US$/GJ, respectively.

  11. Moving alcohol prevention research forward-Part I: introducing a complex systems paradigm.

    Apostolopoulos, Yorghos; Lemke, Michael K; Barry, Adam E; Lich, Kristen Hassmiller

    2018-02-01

    The drinking environment is a complex system consisting of a number of heterogeneous, evolving and interacting components, which exhibit circular causality and emergent properties. These characteristics reduce the efficacy of commonly used research approaches, which typically do not account for the underlying dynamic complexity of alcohol consumption and the interdependent nature of diverse factors influencing misuse over time. We use alcohol misuse among college students in the United States as an example for framing our argument for a complex systems paradigm. A complex systems paradigm, grounded in socio-ecological and complex systems theories and computational modeling and simulation, is introduced. Theoretical, conceptual, methodological and analytical underpinnings of this paradigm are described in the context of college drinking prevention research. The proposed complex systems paradigm can transcend limitations of traditional approaches, thereby fostering new directions in alcohol prevention research. By conceptualizing student alcohol misuse as a complex adaptive system, computational modeling and simulation methodologies and analytical techniques can be used. Moreover, use of participatory model-building approaches to generate simulation models can further increase stakeholder buy-in, understanding and policymaking. A complex systems paradigm for research into alcohol misuse can provide a holistic understanding of the underlying drinking environment and its long-term trajectory, which can elucidate high-leverage preventive interventions. © 2017 Society for the Study of Addiction.

  12. Fault Detection and Isolation for a Supermarket Refrigeration System - Part Two

    Yang, Zhenyu; Rasmussen, Karsten B.; Kieu, Anh T.

    2011-01-01

    be isolated by using a bank of UIOs. Thereby, a complete FDI approach is proposed by combining the Extended-Kalman-Filter (EKF) and UIO methods, after an extensive comparison of KF-, EKF- and UIO-based FDI methods is carried out. The simulation tests show that the complete FDI approach has a good......The Fault Detection and Isolation (FDI) using the Unknown Input Observer (UIO) for a supermarket refrigeration system is investigated. The original system's state $T_{goods}$ (temp. of the goods) is regarded as a system unknown input in this study, so that the FDI decision is not disturbed...

  13. Technical-economic modelling of an aluminium high pressure die casting system for automotive parts fabrication

    Faura, F.

    1997-01-01

    In the present paper a technical-economic model for an aluminium high pressure die casting system has been developed. In order to obtain the necessary data for correlations utilized by the model, has been analyzed the production systems of companies that use these processes. This has allowed to determine the most important technological variables that affect to the economical aspect of the process. A computer application has been developed which allows to explore easily the influence of different system parameters. (Author) 12 refs

  14. Landscape Planning and Ecological Networks. Part B. A Rural System in Nuoro, Sardinia

    Andrea De Montis

    2014-05-01

    Full Text Available This paper represents the continuation, i.e. Part B, of an homonymous paper aiming at designing an ecological network for the periurban area on the town of Nuoro in central Sardinia. While in Part A we illustrate the methodological premises and introduce a spatial network analysis-based study of a pilot ecological network, in this paper we apply a complex network analysis approach to the construction and characterization of the dynamics of the ecological network of Nuoro.  We are interested in monitoring the performance of the ecological network evolving from a real to a hypothetical scenario, where the two target vegetal species (holm oak and cultivated or wild olive are present in each patch. We focus on global network properties and on three different centrality measures: degree, clustering coefficient, and betweenness centrality. We also take into account the influence of the intensity of the connection (i.e. the weight by introducing the corresponding weighted centrality measures. Through thematic mapping we illustrate the pattern of each centrality indicator throughout the entire pilot set of patches. In this way, we demonstrate how spatial network analysis is useful to monitor the performance of the network and to support decision-making, management, and planning.

  15. Salary administration as part of employee incentive system at industrial enterprises

    Sagandykov Michail

    2017-01-01

    Full Text Available The article analyses the financial staff incentives at industrial enterprises. The paper concludes that the incentive system should be developed taking into account the developed staff motivation. The only efficient target of influence is the existing staff motivation components. A 3-element employee incentive framework for industrial enterprises is suggested. The article presents the critical analysis of the existing payroll systems of several industrial enterprises, elicits the common flaws of the incentive payments, and develops requirements for such systems. The paper also provides an industrial enterprise needs matrix and an incentive payment types matrix required to build up a rational monetary staff incentive system. These matrices can be adapted for any industrial enterprise with regard to its long-term objectives.

  16. Status report of the baseline collimation system of CLIC. Part I

    Resta-Lopez, J.; Dalena, B.; Fernandez-Hernando, J.L.; Jackson, F.; Schulte, D.; Seryi, A.; Tomas, R.

    2011-01-01

    Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the opti...

  17. Status report of the baseline collimation system of CLIC. Part II

    Resta-Lopez, J.; Dalena, B.; Fernandez-Hernando, J.L.; Jackson, F.; Schulte, D.; Seryi, A.; Tomas, R.

    2011-01-01

    Important efforts have recently been dedicated to the characterisation and improvement of the design of the post-linac collimation system of the Compact Linear Collider (CLIC). This system consists of two sections: one dedicated to the collimation of off-energy particles and another one for betatron collimation. The energy collimation system is further conceived as protection system against damage by errant beams. In this respect, special attention is paid to the optimisation of the energy collimator design. The material and the physical parameters of the energy collimators are selected to withstand the impact of an entire bunch train. Concerning the betatron collimation section, different aspects of the design have been optimised: the transverse collimation depths have been recalculated in order to reduce the collimator wakefield effects while maintaining a good efficiency in cleaning the undesired beam halo; the geometric design of the spoilers has been reviewed to minimise wakefields; in addition, the opti...

  18. Microelectronic Status Analysis and Secondary Part Procureability Assessment of the ATACMS-BAT Weapon System

    Maddux, Gary

    2000-01-01

    The MT Division, Engineering Directorate (ED), RDEC, AMCOM has the mission and function of providing microelectronic technology assessments, and producibility and supportability analyses for the ATACMS-BAT weapon system...

  19. The fossil hydrothermal system from Volta Grande, Lavras do Sul, RS. Part 2: Geochemical of chlorites

    Mexias, A.S.; Formoso, M.L.L.; Mattos, I.C.; Gomes, M.E.B.; Meunier, A.; Beaufort, D.

    1990-01-01

    Chlorites related to propylitic phyllic processes in Fossil Hydrothermal System of Volta Grande/RS, quite similar to porphyry copper type deposit, were studied. Electron probe analysis in chlorites and chemical total rock analysis made the study of macro and micro system possible. The geochemical study of the micro system enable to characterize the inactive and active flow regimes of hydrothermal process in propylitic and phyllic, respectively. Geo-thermometric data, at least qualitatively, indicate that the phyllic alteration is the same or slightly higher than propylitic alteration. The detailed study of the composition of chlorites in micro system permitted to know the diadochic replacement of elements, especially in chloritization of biotite, in which the mobility of Al 3+ (at least in mineral scale) is possible under constant volume and Ti 4+ . The rocks were analysed by absorption spectroscopy, X-ray fluorescence analysis and gravimetry. (author)

  20. Methods of solving of the optimal stabilization problem for stationary smooth control systems. Part I

    G. Kondrat'ev

    1999-10-01

    Full Text Available In this article some ideas of Hamilton mechanics and differential-algebraic Geometry are used to exact definition of the potential function (Bellman-Lyapunov function in the optimal stabilization problem of smooth finite-dimensional systems.

  1. A catchment-scale irrigation systems model for sugarcane Part 1 ...

    2008-03-28

    Mar 28, 2008 ... Keywords: ACRUCane, irrigation systems, water management, crop modelling, hydrology, water ... vide all the necessary decision support information in an inte- .... Root growth is simulated using a methodology described by.

  2. Occupational health crossing borders part 2: Comparison of 18 occupational health systems across the globe.

    Radon, Katja; Ehrenstein, Vera; Nowak, Dennis; Bigaignon-Cantineau, Janine; Gonzalez, Maria; Vellore, Arun Dev; Zamora, Veronica Enzina; Gupta, Neeraj; Huang, Lirong; Kandkers, Salamat; Lanza, Ana María Menchú; Garcia, Leila Posenato; Patsis, Keti Stylianos; Rojas, Ana Maria Sanchez; Shoma, Ashraf; Verbeek, Jos

    2010-01-01

    Occupational health and safety (OHS) is considered one of the most important factors for a sustainable development; however, it is often considered a luxury by decision-makers. This article compares OHS systems of 18 countries at different stages of development. In an international summer school, structure of the national OHS system, definition of occupational accidents and diseases, procedures for compensation claims, outcome (expressed as incidence of occupational accidents) and training opportunities were presented. National OHS systems ranged from non-existent to systems implemented almost 200 years ago. Priorities, incidence of occupational accidents and training opportunities varied. Common problems included the lack of OHS service for small enterprises and in rural areas. International training programs like this summer school might enhance the exchange about OHS opportunities around the globe and contribute to improved workers health. (c) 2009 Wiley-Liss, Inc.

  3. Modelling of hybrid energy system - Part I: Problem formulation and model development

    Gupta, Ajai; Saini, R.P.; Sharma, M.P. [Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667 (India)

    2011-02-15

    A well designed hybrid energy system can be cost effective, has a high reliability and can improve the quality of life in remote rural areas. The economic constraints can be met, if these systems are fundamentally well designed, use appropriate technology and make use effective dispatch control techniques. The first paper of this tri-series paper, presents the analysis and design of a mixed integer linear mathematical programming model (time series) to determine the optimal operation and cost optimization for a hybrid energy generation system consisting of a photovoltaic array, biomass (fuelwood), biogas, small/micro-hydro, a battery bank and a fossil fuel generator. The optimization is aimed at minimizing the cost function based on demand and potential constraints. Further, mathematical models of all other components of hybrid energy system are also developed. This is the generation mix of the remote rural of India; it may be applied to other rural areas also. (author)

  4. Space station system analysis study. Part 3: Documentation. Volume 2: Technical report. [structural design and construction

    1977-01-01

    An analysis of construction operation is presented as well as power system sizing requirements. Mission hardware requirements are reviewed in detail. Space construction base and design configurations are also examined.

  5. 40 CFR 270.16 - Specific part B information requirements for tank systems.

    2010-07-01

    ... (CONTINUED) SOLID WASTES (CONTINUED) EPA ADMINISTERED PERMIT PROGRAMS: THE HAZARDOUS WASTE PERMIT PROGRAM... systems in which ignitable, reactive, or incompatible wastes are to be stored or treated, a description of...

  6. Mobile satellite business networks: A part of the European mobile system

    deMateo, M. L.; Jongejans, A.; Loisy, C.; VanHimbeeck, C.; Marchal, J. P.; Borella, A.; Sartori, M.

    1995-01-01

    The European Space Agency (ESA) is presently procuring an L-band payload EMS, to be embarked on the ITALSAT-2 satellite due for launch in early 1996, in order to promote a regional European mobile system. One of the Land Mobile Communication systems supported by EMS is the MSBN (Mobile Satellite Business Network) voice and data system which will offer the services of a business network on a seamless European coverage. This paper will first recall the characteristics of the MSBN system, which is based on quasi-synchronized CDMA (Code Division Multiple Access) techniques in both directions, and then describe the CDMA receivers implementation. Main validation test results will also be reported confirming predicted performances.

  7. The standard calibration instrument automation system for the atomic absorption spectrophotometer. Part 3: Program documentation

    Ryan, D. P.; Roth, G. S.

    1982-04-01

    Complete documentation of the 15 programs and 11 data files of the EPA Atomic Absorption Instrument Automation System is presented. The system incorporates the following major features: (1) multipoint calibration using first, second, or third degree regression or linear interpolation, (2) timely quality control assessments for spiked samples, duplicates, laboratory control standards, reagent blanks, and instrument check standards, (3) reagent blank subtraction, and (4) plotting of calibration curves and raw data peaks. The programs of this system are written in Data General Extended BASIC, Revision 4.3, as enhanced for multi-user, real-time data acquisition. They run in a Data General Nova 840 minicomputer under the operating system RDOS, Revision 6.2. There is a functional description, a symbol definitions table, a functional flowchart, a program listing, and a symbol cross reference table for each program. The structure of every data file is also detailed.

  8. Bioactivity of marine organisms: Part 7- Effect of seaweed extract on central nervous system

    Kamat, S.Y.; Wahidullah, S.; DeSouza, L.; Naik, C.G.; Ambiye, V.; Bhakuni, D.S.; Jain, S.; Goel, A.K.; Srimal, R.C.

    Alcohol extracts of marine algae (Rhodophyceae, Phaeophyceae and Chlorophyceae) was screened for their effect on central nervous system. Of 69 species investigated 8 appeared biologically active, 6 being CNS stimulant, sites and dates of collection...

  9. Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

    Interbartolo, Michael

    2009-01-01

    Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

  10. Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

    Georgi Georgiev

    2005-04-01

    Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

  11. Metrological Array of Cyber-Physical Systems. Part 10. Foundations of Objective Qualimetry

    Svyatoslav YATSYSHYN

    2015-07-01

    Full Text Available Contemporary trend of Cyber-Physical Systems evolution considers as promising line the metrology science development ability for estimation the quality of final or intermediate product. The reliability and perfection of smart and flexible operation of mentioned systems could be permanently improved if determination of critical characteristics would be performed correctly, and particular coordinated assessment would be non-correlatively fulfilled. Last is guaranteed at applying thermodynamic principles of coordinates’ choice.

  12. Influence of health systems in malaria case management as part of malaria control in Tanzania

    Masanja, Irene M.

    2013-01-01

    The World Health Organization report in 2007, declared that, it will not be possible to achieve national and international health goals without greater investments in health systems. It is a known fact that today, the advancement in science has led to a better understanding of aetiologies and risk factors of most diseases burden in the world. However, the capacity to deliver these innovations to the population that needs them the most is severely handicapped by fragile and poor health systems...

  13. Devising an energy saving technology for a biogas plant as a part of the cogeneration system

    Чайковська, Євгенія Євстафіївна

    2015-01-01

    The paper suggests an operation technology for a biogas plant that allows setting a heating medium temperature at the inlet to the heat exchanger built in a digester and measuring the heating medium temperature at the outlet. An integrated system for assessing the varied temperature of digestion (that is based on mathematical and logical modeling within the cogeneration system) secures a continuous gas outlet, a timely unloading of fermented mash and loading of a fresh matter. For this purpos...

  14. Phase diagrams of the Fe-rich part of the Fe-W system under high pressure

    Yamane, T.; Kang, Y.S.; Minamino, Y.; Araki, H.; Hiraki, A.; Miyamoto, Y.

    1995-01-01

    Phase diagrams of the Fe-rich part of the Fe-W system under high pressure (1.2 and 2.2 GPa) were established by a reaction-diffusion method and calculated with thermodynamic and volumetric data. When high pressure is applied, the γ region extends and the α region contracts. As a result of increasing pressure, eutectoid and peritectoid reactions appear. (orig.)

  15. Optical orthogonal code-division multiple-access system - Part 2: Multibits/sequence-period OOCDMA

    Kwon, Hyuck M.

    1994-08-01

    In a recently proposed optical orthogonal code division multiple-access (OOCDMA) system, one bit of user's data is transmitted per sequence-period, and a threshold is employed for the final bit decision. In this paper, a system that can transmit multibits per sequence-period is introduced, and avalanche photodiode (APD) noise, thermal noise, and interference, are included. This system, derived by exploiting orthogonal properties of the OOCDMA code sequence and using a maximum search (instead of a threshold) in the final decision, is log(sub 2) F times higher in throughput, where F is sequence-period. For example, four orders of magnitude are better in bit error probability at - 56 dBW received laser power, with F = 1000 chips, 10 'marks' in a sequence, and 10 users of 30 Mb/s data rate for one-bit/sequence-period and 270 Mb/s data rate for multibits/sequence-period system. Furthermore, an exact analysis is performed for the log(sub 2)F bits/sequence-period system with a hard-limiter placed before the receiver, and its performance is compared to the performance without hard-limiter, for the chip-synchronous case. The improvement from using a hard-limiter is significant in the log(sub 2)F bits/sequence-period OCCDMA system.

  16. Kaiser Permanente's performance improvement system, part 2: developing a value framework.

    Schilling, Lisa; Deas, Dennis; Jedlinsky, Maile; Aronoff, Deborah; Fershtman, Juliette; Wali, Abdul

    2010-12-01

    In 2008, Kaiser Permanente began phased implementation of a nationwide performance improvement (PI) system. The aim was to improve performance by providing consistent, highly meaningful performance measurement, increase PI skills in staff at all levels, develop organizational capabilities, and provide support for making improvements in medical centers and across regions. Evaluating the PI System: The intermediate results of the PI system were assessed in the 22 medical centers in four of the eight Kaiser Permanente regions. Implementation for 3 of these medical centers occurred in January 2008 through November 2008, with implementation for the remaining 19 medical centers occurring from September 2008 through September 2009. The 22 medical centers that were evaluated achieved a 61% improvement in selected capabilities, and improvement advisors (IAs) successfully completed 84% of initial PI projects. For each dollar invested, estimates suggested an average return on investment of $2.36. Critical factors include adequate dedicated time for PI activities by staff with necessary expertise, expert support to operations, alignment of projects with regional and national strategic priorities, and close working relationships between PI staff and operational management. Involving finance leaders in improvement planning, prioritization, and oversight is important. These elements can be adapted to smaller systems and single hospitals. The initial evaluation of the Kaiser Permanente PI system indicated that (1) IAs successfully led projects in conjunction with frontline teams, (2) organizational capabilities increased, and (3) the investment in PI infrastructure and staff was sound. Expansion throughout the entire Kaiser Permanente system is under way.

  17. Dermatology in the Darwin anniversary. Part 2: Evolution of the skin-associated immune system.

    Wölfle, Ute; Martin, Stefan; Emde, Matthias; Schempp, Christoph

    2009-10-01

    The present review highlights the evolution of the skin-associated immune system from the invertebrates to the vertebrates and man. In the invertebrates a non-specific humoral immune response dominates. It includes antimicrobial peptides, oxidases, lysozyme, agglutinins, coagulins and melanin. The cellular immune system initially consists of undifferentiated mesenchymal stem cells. Later migrating phagocytes and natural killer cells occur. From the fishes on, dendritic cells are present, linking innate and adaptive immune responses. In addition to this unspecific but highly effective immune system, the specific immune response, based on genetic recombination, is present in the vertebrates starting with the chondral fishes. The adaptive immune system possesses unlimited numbers of highly specific antibodies and T-cell receptors, increasingly tissue specific MHC restriction, and cellular memory. Elements of the skin-associated adaptive immune system are first detectable in the teleost fishes in the form of intraepithelial IgM positive lymphocytes and dendritic cells. Moving up to mammals and man, the skin-associated immune system became more and more complex and effective.

  18. Kaiser Permanente's performance improvement system, Part 1: From benchmarking to executing on strategic priorities.

    Schilling, Lisa; Chase, Alide; Kehrli, Sommer; Liu, Amy Y; Stiefel, Matt; Brentari, Ruth

    2010-11-01

    By 2004, senior leaders at Kaiser Permanente, the largest not-for-profit health plan in the United States, recognizing variations across service areas in quality, safety, service, and efficiency, began developing a performance improvement (PI) system to realizing best-in-class quality performance across all 35 medical centers. MEASURING SYSTEMWIDE PERFORMANCE: In 2005, a Web-based data dashboard, "Big Q," which tracks the performance of each medical center and service area against external benchmarks and internal goals, was created. PLANNING FOR PI AND BENCHMARKING PERFORMANCE: In 2006, Kaiser Permanente national and regional continued planning the PI system, and in 2007, quality, medical group, operations, and information technology leaders benchmarked five high-performing organizations to identify capabilities required to achieve consistent best-in-class organizational performance. THE PI SYSTEM: The PI system addresses the six capabilities: leadership priority setting, a systems approach to improvement, measurement capability, a learning organization, improvement capacity, and a culture of improvement. PI "deep experts" (mentors) consult with national, regional, and local leaders, and more than 500 improvement advisors are trained to manage portfolios of 90-120 day improvement initiatives at medical centers. Between the second quarter of 2008 and the first quarter of 2009, performance across all Kaiser Permanente medical centers improved on the Big Q metrics. The lessons learned in implementing and sustaining PI as it becomes fully integrated into all levels of Kaiser Permanente can be generalized to other health care systems, hospitals, and other health care organizations.

  19. Fuel cell-gas turbine hybrid system design part II: Dynamics and control

    McLarty, Dustin; Brouwer, Jack; Samuelsen, Scott

    2014-05-01

    Fuel cell gas turbine hybrid systems have achieved ultra-high efficiency and ultra-low emissions at small scales, but have yet to demonstrate effective dynamic responsiveness or base-load cost savings. Fuel cell systems and hybrid prototypes have not utilized controls to address thermal cycling during load following operation, and have thus been relegated to the less valuable base-load and peak shaving power market. Additionally, pressurized hybrid topping cycles have exhibited increased stall/surge characteristics particularly during off-design operation. This paper evaluates additional control actuators with simple control methods capable of mitigating spatial temperature variation and stall/surge risk during load following operation of hybrid fuel cell systems. The novel use of detailed, spatially resolved, physical fuel cell and turbine models in an integrated system simulation enables the development and evaluation of these additional control methods. It is shown that the hybrid system can achieve greater dynamic response over a larger operating envelope than either individual sub-system; the fuel cell or gas turbine. Results indicate that a combined feed-forward, P-I and cascade control strategy is capable of handling moderate perturbations and achieving a 2:1 (MCFC) or 4:1 (SOFC) turndown ratio while retaining >65% fuel-to-electricity efficiency, while maintaining an acceptable stack temperature profile and stall/surge margin.

  20. Human – Computer Systems Interaction Backgrounds and Applications 2 Part 1

    Kulikowski, Juliusz; Mroczek, Teresa

    2012-01-01

    The main contemporary human-system interaction (H-SI) problems consist in design and/or improvement of the tools for effective exchange of information between individual humans or human groups and technical systems created for humans aiding in reaching their vital goals. This book is a second issue in a series devoted to the novel in H-SI results and contributions reached for the last years by many research groups in European and extra-European countries. The preliminary (usually shortened) versions of the chapters  were presented as conference papers at the 3rd International Conference on H-SI held in Rzeszow, Poland, in 2010. A  large number of valuable papers  selected for publication caused a necessity to publish the book in two volumes. The given, 1st Volume  consists of sections devoted to: I. Decision Supporting Systems, II. Distributed Knowledge Bases and WEB Systems and III. Impaired Persons  Aiding Systems. The decision supporting systems concern various application areas, like enterprises mana...

  1. Implementation HR information systempart of a unified information environment of MPEI

    I. M. Krepkov

    2016-01-01

    Full Text Available The article is devoted to the unified information environment of National Research University “Moscow Power Engineering Institute” (MPEI, and its most important component – the HR information system. The article describes the architecture of the unified information space of MPEI. The main objective of the development of the HR information system – to provide access to users, including other information systems, to actual information about employees of MPEI.HR information system are based on many years of operating experience of the previous system and the like, are available on the market today, taking into account the decisions of personnel. The earlier HR information system was developed in 1995–1997 and used until mid-2015. In the process of its using it has accumulated a large number of «patches» and requests for revision that was stopped by limitations in the platform and solutions architecture. Comparative analysis of 1C and SAP products showed that the cost of implementation, configuration and maintenance of these products is higher than developing new solutions. Package of Microsoft technology software was chosen as a platform. These technologies have proven themselves in the development of similar projects, and vendor solutions for a long time support all key processes of information systems. Important is the presence of the selected software Microsoft FSTEC certificates (Federal Service for Technical and Export Control, which support the use of these products for storing and processing information in accordance with the laws of the Russian Federation. The MPEI has already implemented a number of systems on the Microsoft platform – postgraduate register, an Internet portal, etc. The use of technology of one supplier facilitates the integration processes and products into a unified information environment. The article details the technical and hardware specifications of the HR information system. The result of the work on

  2. The theory of dissipative structures of the kinetic system for defects of nonlinear physical system 'metal+loading+irradiation'. Part 3

    Tarasov, V.A.; Borikov, T.L.; Kryzhanovskaya, T.V.; Chernezhenko, S.A.; Rusov, V.D.

    2007-01-01

    The kinetic system for defects of physical nonlinear system 'metal + load + irradiation' is specified [1, 2, 3]. Developing the approaches offered in [4], where distinctions of mechanisms of radiating creep and areas of their applicability are formalized (depending on external parameters) for fuel and constructional metals, division of kinetic systems for defects of constructional and fuel metals is carrying out. Thus the accent on the autocatalytic features of kinetic system for defects of reactor fuel metals, resulting from the exoenergic autocatalytic character of nuclear fission reactions being the main point defect source is done. In this part of the article the basic attention is given to the kinetic of sink drains for point defects. For kinetic systems of sinks-sources new approaches for the task of boundary conditions are offered. The possible structure of the computer program modelling kinetic system for defects of nonlinear physical system 'metal + load + irradiation' is considered

  3. V773 Cas, QS Aql, AND BR Ind: ECLIPSING BINARIES AS PARTS OF MULTIPLE SYSTEMS

    Zasche, P.; Juryšek, J.; Nemravová, J.; Wolf, M.; Korčáková, D. [Astronomical Institute, Charles University in Prague, Faculty of Mathematics and Physics, CZ-180 00, Praha 8, V Holešovičkách 2 (Czech Republic); Uhlař, R. [Private Observatory, Pohoří 71, CZ-254 01, Jílové u Prahy (Czech Republic); Svoboda, P. [Private Observatory, Výpustky 5, CZ-614 00, Brno (Czech Republic); Hoňková, K. [Variable Star and Exoplanet Section of Czech Astronomical Society, Vsetínská 941/78, CZ-757 01, Valašské Meziříčí (Czech Republic); Mašek, M.; Prouza, M. [Institute of Physics, The Czech Academy of Sciences, Na Slovance 1999/2, CZ-182 21, Praha (Czech Republic); Čechura, J.; Šlechta, M., E-mail: zasche@sirrah.troja.mff.cuni.cz [Astronomical Institute, The Czech Academy of Sciences, CZ-251 65, Ondřejov (Czech Republic)

    2017-01-01

    Eclipsing binaries remain crucial objects for our understanding of the universe. In particular, those that are components of multiple systems can help us solve the problem of the formation of these systems. Analysis of the radial velocities together with the light curve produced for the first time precise physical parameters of the components of the multiple systems V773 Cas, QS Aql, and BR Ind. Their visual orbits were also analyzed, which resulted in slightly improved orbital elements. What is typical for all these systems is that their most dominant source is the third distant component. The system V773 Cas consists of two similar G1-2V stars revolving in a circular orbit and a more distant component of the A3V type. Additionally, the improved value of parallax was calculated to be 17.6 mas. Analysis of QS Aql resulted in the following: the inner eclipsing pair is composed of B6V and F1V stars, and the third component is of about the B6 spectral type. The outer orbit has high eccentricity of about 0.95, and observations near its upcoming periastron passage between the years 2038 and 2040 are of high importance. Also, the parallax of the system was derived to be about 2.89 mas, moving the star much closer to the Sun than originally assumed. The system BR Ind was found to be a quadruple star consisting of two eclipsing K dwarfs orbiting each other with a period of 1.786 days; the distant component is a single-lined spectroscopic binary with an orbital period of about 6 days. Both pairs are moving around each other on their 148 year orbit.

  4. Antenna Parts and Waveguide Transmission Line of Short Pulse Radar System Design

    M. E. Golubcov

    2014-01-01

    Full Text Available The main point of this research was работы являлось to create a stand to explore the application of short pulse radio signals in radar. The stand consists of antenna and waveguide elements. Each element out to guarantee operation in X-band with 10 percent working bank and 5 percent instantaneous bandwidth and the power output gotta be 1.5 kW. The form of the antenna beam patten need to be similar to cosecant pattern Side-lobe level need to be less than -25 dB. Background level got to be at least -30 dB. Wave friction, which is radiated from the antenna aperture, got to simultaneous formed in a space.As the most easily realizing variant of such antenna cutting parabolic mirror antenna with offset irradiator was chosen. The irradiator phase centre is shifted from the focal point of the paraboloid to form a cosecant pattern. Method of physical optics is used for the analysis of antennas. Calculating pattern of horn irradiator and mirror antenna which were met the requirements was received. The construction choice was limited by the preproduction possibilities, mass and dimensions. Mirror antenna consists of skeleton framing with mirroring elements which are fixing on it. Mirroring plane is multiplex and consists off rectangular planes made by hydroforming method. Antenna was tested and adjusted at the antenna darkroom after fabricating. The results were meted requirements.Besides the mirror antenna and the horn antenna waveguide elements, waveguide bends and rotating joints were calculated, manufactured and researched. All calculations included the manufacturers tolerances, technological corner R etc. As the construction base of rotating joint coaxial waveguide was chosen. The decision on the one hand: let keep the axial symmetry of excited wave at rotating part of the waveguide, on the other hand there’s no necessary to apply resonant rings, which are plug into dielectric beads for the transition from rotating ring part to

  5. Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part III

    Barnes, Bruce W.; Sessions, Alaric M.; Beyon, Jeffrey; Petway, Larry B.

    2014-01-01

    Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. The existing power system was analyzed to rank components in terms of inefficiency, power dissipation, footprint and mass. Design considerations and priorities are compared along with the results of each design iteration. Overall power system improvements are summarized for design implementations.

  6. Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part II

    Crasner, Aaron I.; Scola,Salvatore; Beyon, Jeffrey Y.; Petway, Larry B.

    2014-01-01

    Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Thermal modeling software was used to run steady state thermal analyses, which were used to both validate the designs and recommend further changes. Analyses were run on each redesign, as well as the original system. Thermal Desktop was used to run trade studies to account for uncertainty and assumptions about fan performance and boundary conditions. The studies suggested that, even if the assumptions were significantly wrong, the redesigned systems would remain within operating temperature limits.

  7. Large picture archiving and communication systems of the world--Part 2.

    Bauman, R A; Gell, G; Dwyer, S J

    1996-11-01

    A survey of 82 institutions worldwide was done in 1995 to identify large picture archiving and communication systems (PACS) in clinical operation. A continuing strong trend toward the creation and operation of large PACS was identified. In the 15 months since the first such survey the number of clinical large PACS went from 13 to 23, almost a doubling in that short interval. New systems were added in Asia, Europe, and North America. A strong move to primary interpretation from soft copy was identified, and filmless radiology has become a reality. Workstations for interpretation reside mainly within radiology, but one-third of reporting PACS have more than 20 workstations outside of radiology. Fiber distributed data interface networks were the most numerous, but a variety of networks was reported to be in use. Replies on various display times showed surprisingly good, albeit diverse, speeds. The planned archive length of many systems was 60 months, with usually more than 1 year of data on-line. The main large archive and off-line storage media for these systems were optical disks and magneto-optical disks. Compression was not used before interpretation in most cases, but many systems used 2.5:1 compression for on-line, interpreted cases and 10:1 compression for longer-term archiving. A move to digital imaging and communication in medicine interface usage was identified.

  8. Disintegration of power grid as part of the task of increasing functionality of electric system

    Mukatov Bekzhan

    2017-01-01

    operation is inevitable with reduced reliability or, otherwise, with incomplete functionality where functionality is the set of functions provided by the power system and the quality of their performance. With the mass input of distributed small generation in grids of almost all voltage classes it is necessary to solve the problem of ensuring stability in previously passive distribution networks. The traditional approach based on the “struggle” to maintain synchronism between power plants in the distribution networks is associated with a number of difficulties, which causes to apply another approach to control modes in distribution networks. Complication of the power grid, automatic devices, increase in possible variations of modes, and tendency to maximize the use of production assets lead to an increase in the complexity of tasks solved by dispatch centers. In this regard, it is important to note that availability of cascade failures in power systems speaks of the urgency of the task of ensuring the survivability of energy supply systems both globally and locally. The paper shows how disintegration of the power grid can solve the task of ensuring the functionality of traditional power systems and help to create favorable conditions for distributed small generation integration into the integrated electric power system.

  9. Human – Computer Systems Interaction Backgrounds and Applications 2 Part 2

    Kulikowski, Juliusz; Mroczek, Teresa

    2012-01-01

    This volume of the book contains a collection of chapters selected from the papers which originally (in shortened form) have been presented at the 3rd International Conference on Human-Systems Interaction held in Rzeszow, Poland, in 2010. The chapters are divided into five sections concerning: IV. Environment monitoring and robotic systems, V. Diagnostic systems, VI. Educational Systems, and VII. General Problems. The novel concepts and realizations of humanoid robots, talking robots and orthopedic surgical robots, as well as those of direct brain-computer interface  are examples of particularly interesting topics presented in Sec. VI. In Sec. V the problems of  skin cancer recognition, colonoscopy diagnosis, and brain strokes diagnosis as well as more general problems of ontology design for  medical diagnostic knowledge are presented. Example of an industrial diagnostic system and a concept of new algorithm for edges detection in computer-analyzed images  are also presented in this Section. Among the edu...

  10. Ocean thermal energy conversion (OTEC) power system development. Preliminary design report, Appendices, Part 1 (Final)

    1978-12-04

    The objective of this project is the development of a preliminary design for a full-sized, closed cycle, ammonia power system module for the 100 MWe OTEC demonstration plant. In turn, this demonstration plant is to demonstrate, by 1984, the operation and performance of an Ocean Thermal Power Plant having sufficiently advanced heat exchanger design to project economic viability for commercial utilization in the late 1980's and beyond. Included in this power system development are the preliminary designs for a proof-of-concept pilot plant and test article heat exchangers which are scaled in such a manner as to support a logically sequential, relatively low-cost development of the full-scale power system module. The conceptual designs are presented for the demonstration plant power module, the proof-of-concept pilot plant, and for a pair of test article heat exchangers. Costs associated with the design, development, fabrication, checkout, delivery, installation, and operation are included. The accompanying design and producibilty studies on the full-scale power system module project the performance/economics for the commercial plant. This section of the report contains appendices on the developed computer models, water system dynamic studies, miscellaneous performance analysis, materials and processes, detailed equipment lists, turbine design studies, tube cleaner design, ammonia leak detection, and heat exchanger design supporting data. (WHK)

  11. The exchange of radiotherapy data as part of an electronic patient-referral system

    Lomax, Antony; Grossmann, Martin; Cozzi, Luca; Tercier, Pierre-Alain; Boehringer, Terence; Schneider, Uwe; Logean, Marianne; Volken, Werner; Ratib, Osman; Miralbell, Raymond

    2000-01-01

    Purpose: To describe the implementation and use of an electronic patient-referral system as an aid to the efficient referral of patients to a remote and specialized treatment center. Methods and Materials: A system for the exchange of radiotherapy data between different commercial planning systems and a specially developed planning system for proton therapy has been developed through the use of the PAPYRUS diagnostic image standard as an intermediate format. To ensure the cooperation of the different TPS manufacturers, the number of data sets defined for transfer has been restricted to the three core data sets of CT, VOIs, and three-dimensional dose distributions. As a complement to the exchange of data, network-wide application-sharing (video-conferencing) technologies have been adopted to provide methods for the interactive discussion and assessment of treatments plans with one or more partner clinics. Results: Through the use of evaluation plans based on the exchanged data, referring clinics can accurately assess the advantages offered by proton therapy on a patient-by-patient basis, while the practicality or otherwise of the proposed treatments can simultaneously be assessed by the proton therapy center. Such a system, along with the interactive capabilities provided by video-conferencing methods, has been found to be an efficient solution to the problem of patient assessment and selection at a specialized treatment center, and is a necessary first step toward the full electronic integration of such centers with their remotely situated referral centers

  12. Preliminary Analysis of Hunan Acupuncture-massotherapy Academic School' "FIve Meridian Compatibility"Acupuncture for Treatment of Peptic Ulcer%湖湘针推学术流派"五经配伍"针刺治疗消化性溃疡浅析

    李翠英; 李金香; 潘诗敏; 张曦; 李莹

    2017-01-01

    The main academic thought of Hunan acupuncture-massotherapy academic school is "five meridian compatibility", which achieves the purpose of regulating viscera through "needling meridians and treating viscera"."Five meridian compatibility" combines five-element generation and inhibition theory and meridian-viscera relationship theory andtreats peptic ulcer by needling five meridians, regulating five zang organs and using five elements theory to provide a new idea for clinical acupuncture treatment of splenogastric diseases.%湖湘针推学术流派的主要学术思想为"五经配伍",主张通过"针经治脏"以达到调和脏腑的目的."五经配伍"结合了五行助制、经-脏相关理论,通过针五经、调五脏、和五行来论治消化性溃疡,以期为临床针刺治疗脾胃病提供新的思路.

  13. Tuberculosis of the genitourinary system-Urinary tract tuberculosis: Renal tuberculosis-Part I

    Suleman Merchant

    2013-01-01

    Full Text Available Tuberculosis (TB remains a worldwide scourge and its incidence appears to be increasing due to various factors, such as the spread of human immunodeficiency virus (HIV and acquired immunodeficiency syndrome (AIDS. The insidious onset and non-specific constitutional symptoms of genitourinary tuberculosis (GUTB often lead to delayed diagnosis and rapid progression to a non-functioning kidney. Due to hematogenous dissemination of TB, there is a potential risk of involvement of the contralateral kidney too. Imaging plays an important role in the making of a timely diagnosis and in the planning of treatment, and thus helps to avoid complications such as renal failure. Imaging of GUTB still remains a challenge, mainly on account of the dearth of literature, especially related to the use of the newer modalities such as magnetic resonance imaging (MRI. This two-part article is a comprehensive review of the epidemiology, pathophysiology, and imaging findings in renal TB. Various imaging features of GUTB are outlined, from the pathognomonic lobar calcification on plain film, to finer early changes such as loss of calyceal sharpness and papillary necrosis on intravenous urography (IVU; to uneven caliectasis and urothelial thickening, in the absence of renal pelvic dilatation, as well as the hitherto unreported ′lobar caseation′ on ultrasonography (USG. Well-known complications of GUTB such as sinus tracts, fistulae and amyloidosis are described, along with the relatively less well-known complications such as tuberculous interstitial nephritis (TIN, which may remain hidden because of its ′culture negative′ nature and thus lead to renal failure. The second part of the article reviews the computed tomography (CT and MRI features of GUTB and touches upon future imaging techniques along with imaging of TB in transplant recipients and in immunocompromised patients.

  14. Tuberculosis of the genitourinary system-Urinary tract tuberculosis: Renal tuberculosis-Part I

    Merchant, Suleman; Bharati, Alpa; Merchant, Neesha

    2013-01-01

    Tuberculosis (TB) remains a worldwide scourge and its incidence appears to be increasing due to various factors, such as the spread of human immunodeficiency virus (HIV) and acquired immunodeficiency syndrome (AIDS). The insidious onset and non-specific constitutional symptoms of genitourinary tuberculosis (GUTB) often lead to delayed diagnosis and rapid progression to a non-functioning kidney. Due to hematogenous dissemination of TB, there is a potential risk of involvement of the contralateral kidney too. Imaging plays an important role in the making of a timely diagnosis and in the planning of treatment, and thus helps to avoid complications such as renal failure. Imaging of GUTB still remains a challenge, mainly on account of the dearth of literature, especially related to the use of the newer modalities such as magnetic resonance imaging (MRI). This two-part article is a comprehensive review of the epidemiology, pathophysiology, and imaging findings in renal TB. Various imaging features of GUTB are outlined, from the pathognomonic lobar calcification on plain film, to finer early changes such as loss of calyceal sharpness and papillary necrosis on intravenous urography (IVU); to uneven caliectasis and urothelial thickening, in the absence of renal pelvic dilatation, as well as the hitherto unreported ‘lobar caseation’ on ultrasonography (USG). Well-known complications of GUTB such as sinus tracts, fistulae and amyloidosis are described, along with the relatively less well-known complications such as tuberculous interstitial nephritis (TIN), which may remain hidden because of its ‘culture negative’ nature and thus lead to renal failure. The second part of the article reviews the computed tomography (CT) and MRI features of GUTB and touches upon future imaging techniques along with imaging of TB in transplant recipients and in immunocompromised patients

  15. Optical timing receiver for the NASA laser ranging system. Part I. Constant-fraction discriminator

    Leskovar, B.; Lo, C.C.

    1975-01-01

    Position-resolution capabilities of the NASA laser ranging system are essentially determined by time-resolution capabilities of its optical timing receiver. The optical timing receiver consists of a fast photoelectric device, primarily a standard of microchannel-plate-type photomultiplier or an avalanche photodiode detector, a timing discriminator, a high-precision time-interval digitizer, and a signal-processing system. The time-resolution capabilities of the receiver are determined by the photoelectron time spread of the photoelectric device, the time walk and resolution characteristics of the timing discriminator, and the time-interval digitizer. It is thus necessary to evaluate available fast photoelectronic devices with respect to their time-resolution capabilities, and to design a very low time walk timing discriminator and a high-precision time digitizer which will be used in the laser ranging system receiver. (auth)

  16. Development project of an automatic sampling system for part time unmanned pipeline terminals

    Moreira, Gullherme O.; De Almelda, Marcio M. G.; Ramos, Ricardo R. [Petrobas, (Brazil); Potten, Gary [Cameron Measurement Systems, (United States)

    2010-07-01

    The Sao Paulo - Brasilia Pipeline (OSBRA) is a highly automated pipeline using a SCADA system which operates from a control room. A new quality management system standard was established for transportation and storage operations. The products had to be sampled on an automatic basis. This paper reports the development of an automatic sampling system (ASS) in accordance with the new quality control standard. The prototype was developed to be implemented through a human-machine interface (HMI) from the control room SCADA screens. A technical cooperation agreement(TCA) was drawn up for development of this new ASS product. The TCA was a joint cooperation between the Holding, the Operator and the cooperators. The prototype will be on-field tested at Senador Canedo tank farm to SPEC requirements. The current performance of the ASS establishes reasonable expectations for further successful development.

  17. Geophysical data collection using an interactive personal computer system. Part 1. ; Experimental monitoring of Suwanosejima volcano

    Iguchi, M. (Kyoto Univerdity, Kyoto (Japan). Disaster Prevention Reserach Institute)

    1991-10-15

    In the article, a computer-communication system was developed in order to collect geophysical data from remote volcanos via a public telephpne network. This system is composed of a host presonal computer at an observatory and several personal computers as terminals at remote stations. Each terminal acquires geophysical data, such as seismic, intrasonic, and ground deformation date. These gara are stored in the terminals temporarily, and transmitted to the host computer upon command from host computer. Experimental monitoring was conducted between Sakurajima Volcanological Observatory and several statins in the Satsunan Islands and southern Kyushu. The seismic and eruptive activities of Suwanosejima volcano were monitored by this system. Consequently, earthquakes and air-shocks accompanied by the explosive activity were observed. B-type earthquakes occurred prio to the relatively prolonged eruptive activity. Intermittent occurrences of volcanic tremors were also clearly recognized from the change in mean amplitubes of seismic waves. 7 refs., 10 figs., 2 tabs.

  18. Consensus Guidelines for the Treatment of Atopic Dermatitis in Korea (Part II): Systemic Treatment.

    Kim, Jung Eun; Kim, Hyun Jeong; Lew, Bark-Lynn; Lee, Kyung Ho; Hong, Seung Phil; Jang, Yong Hyun; Park, Kui Young; Seo, Seong Jun; Bae, Jung Min; Choi, Eung Ho; Suhr, Ki Beom; Lee, Seung Chul; Ko, Hyun Chang; Park, Young Lip; Son, Sang Wook; Seo, Young Jun; Lee, Yang Won; Cho, Sang Hyun; Park, Chun Wook; Roh, Joo Young

    2015-10-01

    Since the treatment guidelines for atopic dermatitis (AD) were issued by the Korean Atopic Dermatitis Association (KADA) work group in 2006, there have been further advances in the systemic treatment of AD. We aimed to establish updated evidence- and experience-based systemic treatment guidelines for Korean AD. We compiled a database of references from relevant systematic reviews and guidelines regarding the systemic management of AD, including antihistamines, antimicrobials, systemic immunomodulators, allergen-specific immunotherapy, phototherapy, adjunctive treatment, and complementary and alternative medicines. Evidence for each statement was graded and classified based on the strength of the recommendation. Thirty-nine council members of KADA participated in the three rounds of votes and expert consensus recommendations were established. The use of antihistamines is recommended to relieve pruritus and to prevent exacerbation due to scratching in AD patients. Infection should be controlled as needed and long-term medication should be avoided. For moderate to severe AD patients, concomitant active treatments with systemic immunomodulators are indicated. Cyclosporine is the first choice among systemic immunomodulators and others should be considered as second-line alternatives. Allergen-specific immunotherapy could be effective in AD patients with aeroallergen hypersensitivity. Phototherapy can be useful for moderate to severe AD patients and narrow-band ultraviolet B is the most effective option. Complementary and alternative medicines cannot be recommended for treating AD. We expect these recommendations to be a reference guide for physicians and AD patients in choosing the appropriate treatment to improve quality of life and decrease unnecessary social medical costs.

  19. Global optimization for overall HVAC systems - Part I problem formulation and analysis

    Lu Lu; Cai Wenjian; Chai, Y.S.; Xie Lihua

    2005-01-01

    This paper presents the global optimization technologies for overall heating, ventilating and air conditioning (HVAC) systems. The objective function of global optimization and constraints are formulated based on mathematical models of the major components. All these models are associated with power consumption components and heat exchangers for transferring cooling load. The characteristics of all the major components are briefly introduced by models, and the interactions between them are analyzed and discussed to show the complications of the problem. According to the characteristics of the operating components, the complicated original optimization problem for overall HVAC systems is transformed and simplified into a compact form ready for optimization

  20. Metrological Array of Cyber-Physical Systems. Part 3. Smart Energy-Efficient House

    Ihor HNES

    2015-04-01

    Full Text Available Smart energy-efficient houses as the components of Cyber-Physical Systems are developed intensively. The main stream of progress consists in the research of Smart houses’ energy supply. By this option the mentioned objects are advancing from passive houses through net-zero energy houses to active houses that are capable of sharing their own accumulated energy with other components of Cyber-Physical Systems. We consider the problems of studying the metrology models and measuring the heat dissipation in such houses trying to apply network and software achievements as well as the new types of devices with improved characteristics.

  1. Validation of the learning transfer system inventory in the South African context (Part 1

    W J Coetsee

    2006-10-01

    Full Text Available The purpose of this study was to validate the Learning Transfer System Inventory (LTSI in the South African context. The sample used in this study was a convenience sample of 240 employees working for a Banking group. Exploratory factor analysis of the LTSI was used to determine if an interpretable factor structure of latent transfer system constructs when applied in the South African context could be identified. From the results it appears that the factor structure of the LTSI, as revealed by means of the exploratory approach, appears differently in the South African context.

  2. Studies on classifying Indian coals. Part II. A new system for grading and pricing

    Tumuluri, S.G.; Shrikhande, S.K.; Rao, S.K.; Haque, R.

    1985-07-01

    The new system is self-complete through grading to pricing. It grades non-coking coal by moisture and ash contents. Coking coal is graded by GKLT coke type and ash content. Volatile matter content is used as a supporting indexer, where necessary. Through the grade data, a coal is evaluated into a single numeral which depicts the coaly matter content and its nature or effectiveness. This value, called effective coaly matter, is converted to a relative rupee value or price index/price. Pragmatics and versatility of the system are discussed.

  3. New handling systems as technical support for the working process. Part 6. Feeding devices

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  4. 15 CFR Supplement No. 7 to Part 742 - Description of Major Weapons Systems

    2010-01-01

    ... Major Weapons Systems (1) Battle Tanks: Tracked or wheeled self-propelled armored fighting vehicles with...) Armored Combat Vehicles: Tracked, semi-tracked, or wheeled self-propelled vehicles, with armored..., including versions of these aircraft which perform specialized electronic warfare, suppression of air...

  5. Testing the potential of geochemical techniques in identifying hydrological systems within landslides in partly weathered marls

    Bogaard, T.A.; Buma, J.T.; Klawer, C.J.M.

    2004-01-01

    This paper’s objective is to determine how useful geochemistry can be in landslide investigations. More specifically, what additional information can be gained by analysing the cation exchange capacity (CEC) and cation composition in respect to the hydrological system of a landslide area in clayey

  6. Experiments with the Sun Java Real-Time System -- Part 2

    Auguston, Mikhail; Cook, Thomas S; Drusinsky, Doron; Michael, James B; Otani, Thomas W; Shing, Man-Tak

    2007-01-01

    In the authors' first report on the Sun Java Real-Time System (RTS), they concluded that it is preferable to use real-time Java threads that use heap memory rather than no-heap real-time threads (NHRTTs...

  7. 22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

    2010-04-01

    ... an assembled article ready for its intended use. Only ammunition, fuel or another energy source is...-item without which the end-item is inoperable. (Example: Airframes, tail sections, transmissions, tank..., operating systems and support software for design, implementation, test, operation, diagnosis and repair. A...

  8. 6 CFR Appendix C to Part 5 - DHS Systems of Records Exempt From the Privacy Act

    2010-01-01

    ... in section 2(9) of the Homeland Security Act of 2002) and “critical infrastructure” (as defined in 42... infrastructure and the availability of a viable national security and emergency preparedness communications infrastructure; (4) activities detrimental to the security of transportation and transportation systems; (5...

  9. An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics

    Molenaar, Peter C. M.

    2015-01-01

    The main theme of this paper concerns the persistent critique of Gilbert Gottlieb on developmental behavior genetics and my reactions to this critique, the latter changing from rejection to complete acceptation. Concise characterizations of developmental behavior genetics, developmental systems theory (to which Gottlieb made essential…

  10. Functional food monitoring as part of the new Dutch dietary monitoring system

    Rompelberg CJM; Jager M; Bakker MI; Buurma-Rethans EJM; Ocke MC; CVG

    2006-01-01

    Good data on functional food consumption necessary for an adequate Dutch nutrition policy are lacking. This lack may be overcome in future by including functional food monitoring in the new dietary monitoring system in the Netherlands. One specific form of monitoring could be an Internet-based

  11. Regenerating an Arsenic Removal Iron-Based Adsorptive Media System, Part 1: The Regeneration Process

    Adsorptive media technology is a frequently used method of removing arsenic by small water systems because of its simplicity and efficiency. Current practice is to replace the media when it no longer reduces arsenic below the USEPA drinking water maximum contaminant level (MCL) ...

  12. Identifying and locating surface defects in wood: Part of an automated lumber processing system

    Richard W. Conners; Charles W. McMillin; Kingyao Lin; Ramon E. Vasquez-Espinosa

    1983-01-01

    Continued increases in the cost of materials and labor make it imperative for furniture manufacturers to control costs by improved yield and increased productivity. This paper describes an Automated Lumber Processing System (ALPS) that employs computer tomography, optical scanning technology, the calculation of an optimum cutting strategy, and 1 computer-driven laser...

  13. 32 CFR Appendix B to Part 324 - System of Records Notice

    2010-07-01

    ..., punctuation, and spaces. 2. Security classification. Self explanatory. (DoD does not publish this caption... birth, etc.); and any description of proof of identity for verification purposes required for personal... verification. If appropriate, the individual may be referred to the system manager or another DFAS official who...

  14. Imaging of systemic lupus erythematosus. Part II: Gastrointestinal, renal, and musculoskeletal manifestations

    Goh, Y.P.; Naidoo, P.; Ngian, G.-S.

    2013-01-01

    Systemic lupus erythematosus (SLE) is a chronic, multisystem autoimmune disease that has a relapsing and remitting course. It has a wide range of presentations with various organ manifestations. In this review, we have compiled the radiological findings of gastrointestinal, renal, and musculoskeletal manifestations of SLE.

  15. Modeling the global society-biosphere-climate system : Part 2: Computed scenarios

    Alcamo, J.; Van Den Born, G.J.; Bouwman, A.F.; De Haan, B.J.; Klein Goldewijk, K.; Klepper, O.; Krabec, J.; Leemans, R.; Olivier, J.G.J.; Toet, A.M.C.; De Vries, H.J.M.; Van Der Woerd, H.J.

    1994-01-01

    This paper presents scenarios computed with IMAGE 2.0, an integrated model of the global environment and climate change. Results are presented for selected aspects of the society-biosphere-climate system including primary energy consumption, emissions of various greenhouse gases, atmospheric

  16. Network fault response of wind power plants in distribution systems during reverse power flows. Part II

    Boemer, J.C.; Gibescu, M.; vd Meijden, M.A.M.M.; Rawn, B.G.; Kling, W.L.

    2013-01-01

    Abstract—The ability of wind power park modules to control their response to transmission network faults allows for specification of new control features directed at stabilising the power system response during and after disturbances. However, the ‘effectiveness’ of these features in situations

  17. DISTURBANCES IN THE POWER SUPPLY NETWORK OF BUCHAREST SUBWAY SYSTEM (PART 1

    Alexandru Ionuț CHIUȚĂ

    2011-05-01

    Full Text Available In the present study it is exposed the problem of disturbances in the main power supply of Bucharest Subway (underground system, the cause and their action, as well as the measures taken to limit the disturbances produced. All this is reflected in the measurements made using oscilloscope Fluke installed at the dispatch point, following to be then processed.

  18. Hybrid fuel cell/diesel generation total energy system, part 2

    Blazek, C. F.

    1982-11-01

    Meeting the Goldstone Deep Space Communications Complex (DGSCC) electrical and thermal requirements with the existing system was compared with using fuel cells. Fuel cell technology selection was based on a 1985 time frame for installation. The most cost-effective fuel feedstock for fuel cell application was identified. Fuels considered included diesel oil, natural gas, methanol and coal. These fuel feedstocks were considered not only on the cost and efficiency of the fuel conversion process, but also on complexity and integration of the fuel processor on system operation and thermal energy availability. After a review of fuel processor technology, catalytic steam reformer technology was selected based on the ease of integration and the economics of hydrogen production. The phosphoric acid fuel cell was selected for application at the GDSCC due to its commercial readiness for near term application. Fuel cell systems were analyzed for both natural gas and methanol feedstock. The subsequent economic analysis indicated that a natural gas fueled system was the most cost effective of the cases analyzed.

  19. PUMN: part I of the WINERY radiation damage computer simulation system

    Kuspa, J.P.; Edwards, D.R.; Tsoulfanidis, N.

    1976-01-01

    Results of computer work to simulate the response of crystalline materials to radiation are presented. To organize this and future work into a long range program of investigation, the WINERY Radiation Damage Computer Simulation System is proposed. The WINERY system is designed to solve the entire radiation damage problem from the incident radiation to the property changes which occur in the material, using a set of interrelated computer programs. One portion of the system, the PUMN program, has been used to obtain important radiation damage results with Fe 3 Al crystal. PUMN simulates the response of the atoms in a crystal to a knock-on atom. It yields the damage configuration of the crystal by considering the dynamic interaction of all the atoms of the computational cell, up to 1000 atoms. The PUMN program provides the WINERY system with results for the number of displacements, N/sub d/, due to knock-on atoms with various energies. The values of N/sub d/ for Fe 3 Al were obtained at two different energies, 100 and 500 eV, for a variety of initial directions. These values are to be used to form a table of results for use in WINERY

  20. Robotic exploration of the solar system part I : the golden age 1957-1982

    Ulivi, Paolo

    2007-01-01

    This fascinating book is a detailed history of unmanned missions that have explored our solar system. The subject is treated wherever possible from an engineering and scientific standpoint and includes technical descriptions of the spacecraft, their mission designs and their instrumentations.