Sound amplification at a rectangular T-junction with merging mean flows

Science.gov (United States)

Du, Lin; Holmberg, Andreas; Karlsson, Mikael; Åbom, Mats

2016-04-01

This paper reports a numerical study on the aeroacoustic response of a rectangular T-junction with merging mean flows. The primary motivation of the work is to explain the high sound amplification, recently seen experimentally, when introducing a small merging bias flow. The acoustic results are found solving the compressible Linearized Navier-Stokes Equations (LNSEs) in the frequency domain, where the base flow is first obtained using RANS with a k-ε turbulence model. The model predicts the measured scattering data well, including the amplitude and Strouhal number for the peak amplification, if the effect of eddy viscosity damping is included. It is found that the base flow changes significantly with the presence of a small bias flow. Compared to pure grazing flow a strong unstable shear layer is created in the downstream main duct starting from the T-junction trailing edge. This means that the main region of vortex-sound interaction is moved away from the junction to a downstream region much larger than the junction width. To analyze the sound amplification in this region Howe's energy corollary and the growth of acoustic density are used.

A Novel Histogram Region Merging Based Multithreshold Segmentation Algorithm for MR Brain Images

Directory of Open Access Journals (Sweden)

Siyan Liu

2017-01-01

Full Text Available Multithreshold segmentation algorithm is time-consuming, and the time complexity will increase exponentially with the increase of thresholds. In order to reduce the time complexity, a novel multithreshold segmentation algorithm is proposed in this paper. First, all gray levels are used as thresholds, so the histogram of the original image is divided into 256 small regions, and each region corresponds to one gray level. Then, two adjacent regions are merged in each iteration by a new designed scheme, and a threshold is removed each time. To improve the accuracy of the merger operation, variance and probability are used as energy. No matter how many the thresholds are, the time complexity of the algorithm is stable at O(L. Finally, the experiment is conducted on many MR brain images to verify the performance of the proposed algorithm. Experiment results show that our method can reduce the running time effectively and obtain segmentation results with high accuracy.

Determination of Onramp Weaving Length for Resolving Merging Dilemma

Directory of Open Access Journals (Sweden)

Chiu Liu

2012-03-01

Full Text Available It is physically known that onramp merging may turn out to be difficult if the onramp (weaving/merging length is too short because a driver under certain driving circumstances may find that either merging ahead or merging behind a neighboring vehicle on the adjacent highway lane cannot be completed. Various existing guidelines or design manuals provide no clear physical understanding and explanations to the design onramp weaving length but often based on evolved empirical experiences. By integrating human factors, vehicle dynamic characteristics, roadway surface condition, and the onramp weaving design into a single unified analytic framework, the onramp length required for a driver to merge into the highway traffic successfully is determined exactly with formulas and physical solutions to avoid the merging dilemma and enhance driving safety at highway interchanges. The design onramp weaving length is examined and evaluated with various foreseeable merging scenarios and physical examples. This analytic framework sheds light on the understanding of the onramp weaving the first time strictly on a physical human-vehicle-roadway interaction setting. Practitioners can easily apply these user friendly formulae and equations derived from the unified framework to calculate the onramp weaving length to resolve the merging dilemma and enhance driving safety for any highway interchanges.

Merging history of three bimodal clusters

Science.gov (United States)

Maurogordato, S.; Sauvageot, J. L.; Bourdin, H.; Cappi, A.; Benoist, C.; Ferrari, C.; Mars, G.; Houairi, K.

2011-01-01

We present a combined X-ray and optical analysis of three bimodal galaxy clusters selected as merging candidates at z ~ 0.1. These targets are part of MUSIC (MUlti-Wavelength Sample of Interacting Clusters), which is a general project designed to study the physics of merging clusters by means of multi-wavelength observations. Observations include spectro-imaging with XMM-Newton EPIC camera, multi-object spectroscopy (260 new redshifts), and wide-field imaging at the ESO 3.6 m and 2.2 m telescopes. We build a global picture of these clusters using X-ray luminosity and temperature maps together with galaxy density and velocity distributions. Idealized numerical simulations were used to constrain the merging scenario for each system. We show that A2933 is very likely an equal-mass advanced pre-merger ~200 Myr before the core collapse, while A2440 and A2384 are post-merger systems (~450 Myr and ~1.5 Gyr after core collapse, respectively). In the case of A2384, we detect a spectacular filament of galaxies and gas spreading over more than 1 h-1 Mpc, which we infer to have been stripped during the previous collision. The analysis of the MUSIC sample allows us to outline some general properties of merging clusters: a strong luminosity segregation of galaxies in recent post-mergers; the existence of preferential axes - corresponding to the merging directions - along which the BCGs and structures on various scales are aligned; the concomitance, in most major merger cases, of secondary merging or accretion events, with groups infalling onto the main cluster, and in some cases the evidence of previous merging episodes in one of the main components. These results are in good agreement with the hierarchical scenario of structure formation, in which clusters are expected to form by successive merging events, and matter is accreted along large-scale filaments. Based on data obtained with the European Southern Observatory, Chile (programs 072.A-0595, 075.A-0264, and 079.A-0425

Time-varying mixed logit model for vehicle merging behavior in work zone merging areas.

Science.gov (United States)

Weng, Jinxian; Du, Gang; Li, Dan; Yu, Yao

2018-08-01

This study aims to develop a time-varying mixed logit model for the vehicle merging behavior in work zone merging areas during the merging implementation period from the time of starting a merging maneuver to that of completing the maneuver. From the safety perspective, vehicle crash probability and severity between the merging vehicle and its surrounding vehicles are regarded as major factors influencing vehicle merging decisions. Model results show that the model with the use of vehicle crash risk probability and severity could provide higher prediction accuracy than previous models with the use of vehicle speeds and gap sizes. It is found that lead vehicle type, through lead vehicle type, through lag vehicle type, crash probability of the merging vehicle with respect to the through lag vehicle, crash severities of the merging vehicle with respect to the through lead and lag vehicles could exhibit time-varying effects on the merging behavior. One important finding is that the merging vehicle could become more and more aggressive in order to complete the merging maneuver as quickly as possible over the elapsed time, even if it has high vehicle crash risk with respect to the through lead and lag vehicles. Copyright © 2018 Elsevier Ltd. All rights reserved.

Image Segmentation of Cattle Muzzle Using Region Merging Statistical Technic

Directory of Open Access Journals (Sweden)

Jullend Gatc

2015-12-01

Full Text Available Making an identification system that able to assist in obtaining, recording and organizing information is the first step in developing any kind of recording system. Nowadays, many recording systems were developed with artificial markers although it has been proved that it has many limitations. Biometrics use of animals provides a solution to these restrictions. On a cattle, biometric features contained in the cattle muzzle that can be used as a pattern recognition sample. Pattern recognition methods can be used for the development of cattle identification system utilizing biometric found on the cattle muzzle using digital image processing techniques. In this study, we proposed cattle muzzle identification method using segmentation Statistical Region Merging (SRM. This method aims to identify specific patterns found on the cattle muzzle by separating the object pattern (foreground from unnecessary information (background This method is able to identified individual cattle based on the pattern of it muzzle. Based on our evaluation, this method can provide good performance results. This method good performance can be seen from the precision and recall : 87% and the value of ROC : 0.976. Hopefully this research can be used to help identify cattle accurately on the recording process.

Computer-assisted segmentation of CT images by statistical region merging for the production of voxel models of anatomy for CT dosimetry

Czech Academy of Sciences Publication Activity Database

Caon, M.; Sedlář, Jiří; Bajger, M.; Lee, G.

2014-01-01

Roč. 37, č. 2 (2014), s. 393-403 ISSN 0158-9938 Institutional support: RVO:67985556 Keywords : Voxel model * Image segmentation * Statistical region merging * CT dosimetry Subject RIV: JD - Computer Applications, Robotics Impact factor: 0.882, year: 2014 http://library.utia.cas.cz/separaty/2014/ZOI/sedlar-0428537.pdf

In-depth analysis of drivers' merging behavior and rear-end crash risks in work zone merging areas.

Science.gov (United States)

Weng, Jinxian; Xue, Shan; Yang, Ying; Yan, Xuedong; Qu, Xiaobo

2015-04-01

This study investigates the drivers' merging behavior and the rear-end crash risk in work zone merging areas during the entire merging implementation period from the time of starting a merging maneuver to that of completing the maneuver. With the merging traffic data from a work zone site in Singapore, a mixed probit model is developed to describe the merging behavior, and two surrogate safety measures including the time to collision (TTC) and deceleration rate to avoid the crash (DRAC) are adopted to compute the rear-end crash risk between the merging vehicle and its neighboring vehicles. Results show that the merging vehicle has a bigger probability of completing a merging maneuver quickly under one of the following situations: (i) the merging vehicle moves relatively fast; (ii) the merging lead vehicle is a heavy vehicle; and (iii) there is a sizable gap in the adjacent through lane. Results indicate that the rear-end crash risk does not monotonically increase as the merging vehicle speed increases. The merging vehicle's rear-end crash risk is also affected by the vehicle type. There is a biggest increment of rear-end crash risk if the merging lead vehicle belongs to a heavy vehicle. Although the reduced remaining distance to work zone could urge the merging vehicle to complete a merging maneuver quickly, it might lead to an increased rear-end crash risk. Interestingly, it is found that the rear-end crash risk could be generally increased over the elapsed time after the merging maneuver being triggered. Copyright © 2015 Elsevier Ltd. All rights reserved.

Merging {DBMs} Efficiently

DEFF Research Database (Denmark)

David, Alexandre

2005-01-01

In this paper we present different algorithms to reduce the number of DBMs in federations by merging them. Federations are unions of DBMs and are used to represent non-convex zones. Inclusion checking between DBMs is a limited technique to reduce the size of federations and how to choose some DBMs...... to merge them into a larger one is a combi-natorial problem. We present a number of simple but efficient techniques to avoid searching the combinations while still being able to merge any number of DBMs...

Merge of terminological resources

DEFF Research Database (Denmark)

Henriksen, Lina; Braasch, Anna

2012-01-01

In our globalized world, the amount of cross-national communication increases rapidly, which also calls for easy access to multi-lingual high quality terminological resources. Sharing of terminology resources is currently becoming common practice, and efficient strategies for integration...... – or merging – of terminology resources are strongly needed. This paper discusses prerequisites for successful merging with the focus on identification of candidate duplicates of a subject domain found in the resources to be merged, and it describes automatic merging strategies to be applied to such duplicates...... in electronic terminology resources. Further, some perspectives of manual, supplementary assessment methods supporting the automatic procedures are sketched. Our considerations are primarily based on experience gained in the IATE and EuroTermBank projects, as merging was a much discussed issue in both projects....

Comparing the Global and Merged with the Local and Separate: On a Downside to the Integration of Regions and Nations

Directory of Open Access Journals (Sweden)

Oded Stark

2015-12-01

Full Text Available This paper looks at the integration of regions and nations through the prism of the merger of populations (societies. The paper employs a particular index of social stress. Stylized examples of the merging of two populations suggest that with integration, the social stress index will increase. The examples form the basis for the development of new formulas for calculating the social stress of an integrated population as a function of the levels of social stress of the constituent populations when apart. The formulas reveal that the social stress of an integrated population is higher than the sum of the levels of social stress of the constituent populations when apart. This raises the distinct possibility that the merging of populations may be a social liability: integration may fail to give the populace a sense of improved wellbeing.

Preparation for electron ring - plasma ring merging experiments in RECE-MERGE

International Nuclear Information System (INIS)

Taggart, D.; Sekiguchi, A.; Fleischmann, H.H.

1986-01-01

The formation of a mixed-CT using relativistic electron rings and gun-produced plasma rings by MERGE-ing them axially is simulated. This process is similar to the axial stacking of relativistic electron rings in RECE-Christa. The results of their first plasm production experiment are reported here. After study of the gun-produced plasma's properties is completed, the gun will be mounted at the downstream end of the vacuum tank and the source of relativistic electron rings will be at the upstream end. The two rings, formed at opposite ends of the tank, will be translated axially and merged

Triadic split-merge sampler

Science.gov (United States)

van Rossum, Anne C.; Lin, Hai Xiang; Dubbeldam, Johan; van der Herik, H. Jaap

2018-04-01

In machine vision typical heuristic methods to extract parameterized objects out of raw data points are the Hough transform and RANSAC. Bayesian models carry the promise to optimally extract such parameterized objects given a correct definition of the model and the type of noise at hand. A category of solvers for Bayesian models are Markov chain Monte Carlo methods. Naive implementations of MCMC methods suffer from slow convergence in machine vision due to the complexity of the parameter space. Towards this blocked Gibbs and split-merge samplers have been developed that assign multiple data points to clusters at once. In this paper we introduce a new split-merge sampler, the triadic split-merge sampler, that perform steps between two and three randomly chosen clusters. This has two advantages. First, it reduces the asymmetry between the split and merge steps. Second, it is able to propose a new cluster that is composed out of data points from two different clusters. Both advantages speed up convergence which we demonstrate on a line extraction problem. We show that the triadic split-merge sampler outperforms the conventional split-merge sampler. Although this new MCMC sampler is demonstrated in this machine vision context, its application extend to the very general domain of statistical inference.

Music and social bonding: "self-other" merging and neurohormonal mechanisms.

Science.gov (United States)

Tarr, Bronwyn; Launay, Jacques; Dunbar, Robin I M

2014-01-01

It has been suggested that a key function of music during its development and spread amongst human populations was its capacity to create and strengthen social bonds amongst interacting group members. However, the mechanisms by which this occurs have not been fully discussed. In this paper we review evidence supporting two thus far independently investigated mechanisms for this social bonding effect: self-other merging as a consequence of inter-personal synchrony, and the release of endorphins during exertive rhythmic activities including musical interaction. In general, self-other merging has been experimentally investigated using dyads, which provide limited insight into large-scale musical activities. Given that music can provide an external rhythmic framework that facilitates synchrony, explanations of social bonding during group musical activities should include reference to endorphins, which are released during synchronized exertive movements. Endorphins (and the endogenous opioid system (EOS) in general) are involved in social bonding across primate species, and are associated with a number of human social behaviors (e.g., laughter, synchronized sports), as well as musical activities (e.g., singing and dancing). Furthermore, passively listening to music engages the EOS, so here we suggest that both self-other merging and the EOS are important in the social bonding effects of music. In order to investigate possible interactions between these two mechanisms, future experiments should recreate ecologically valid examples of musical activities.

Observations and Simulations of Formation of Broad Plasma Depletions Through Merging Process

Science.gov (United States)

Huang, Chao-Song; Retterer, J. M.; Beaujardiere, O. De La; Roddy, P. A.; Hunton, D.E.; Ballenthin, J. O.; Pfaff, Robert F.

2012-01-01

Broad plasma depletions in the equatorial ionosphere near dawn are region in which the plasma density is reduced by 1-3 orders of magnitude over thousands of kilometers in longitude. This phenomenon is observed repeatedly by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite during deep solar minimum. The plasma flow inside the depletion region can be strongly upward. The possible causal mechanism for the formation of broad plasma depletions is that the broad depletions result from merging of multiple equatorial plasma bubbles. The purpose of this study is to demonstrate the feasibility of the merging mechanism with new observations and simulations. We present C/NOFS observations for two cases. A series of plasma bubbles is first detected by C/NOFS over a longitudinal range of 3300-3800 km around midnight. Each of the individual bubbles has a typical width of approx 100 km in longitude, and the upward ion drift velocity inside the bubbles is 200-400 m/s. The plasma bubbles rotate with the Earth to the dawn sector and become broad plasma depletions. The observations clearly show the evolution from multiple plasma bubbles to broad depletions. Large upward plasma flow occurs inside the depletion region over 3800 km in longitude and exists for approx 5 h. We also present the numerical simulations of bubble merging with the physics-based low-latitude ionospheric model. It is found that two separate plasma bubbles join together and form a single, wider bubble. The simulations show that the merging process of plasma bubbles can indeed occur in incompressible ionospheric plasma. The simulation results support the merging mechanism for the formation of broad plasma depletions.

A tangent subsolar merging line

International Nuclear Information System (INIS)

Crooker, N.U.; Siscoe, G.L.; Toffoletto, F.R.

1990-01-01

The authors describe a global magnetospheric model with a single subsolar merging line whose position is determined neither locally by the relative orientations and strengths of the merging fields nor globally by the orientation of a separator line--the governing parameters of most previous models--but by the condition of tangential contact between the external field and the magnetopause. As in previous models, the tilt of the merging line varies with IMF orientation, but here it also depends upon the ratio of Earth's magnetic flux that leaks out of the magnetopause to IMF flux that penetrates in. In the limiting case treated by Alekseyev and Belen'kaya, with no leakage of Earth's field and total IMF penetration, the merging line forms a great circle around a spherical magnetosphere where undeviated IMF lines lie tangent to its surface. This tangent merging line lies perpendicular to the IMF. They extend their work to the case of finite leakage and partial penetration, which distort the IMF into a draped pattern, thus changing the locus of tangency to the sphere. In the special case where the penetrating IMF flux is balanced by an equal amount of Earth flux leakage, the tangent merging line bisects the angle between the IMF and Earth's northward subsolar field. This result is identical to the local merging line model result for merging fields with equal magnitude. Here a global flux balance condition replaces the local equal magnitude condition

Merging By Decentralized Eventual Consistency Algorithms

Directory of Open Access Journals (Sweden)

Ahmed-Nacer Mehdi

2015-12-01

Full Text Available Merging mechanism is an essential operation for version control systems. When each member of collaborative development works on an individual copy of the project, software merging allows to reconcile modifications made concurrently as well as managing software change through branching. The collaborative system is in charge to propose a merge result that includes user’s modifications. Theusers now have to check and adapt this result. The adaptation should be as effort-less as possible, otherwise, the users may get frustrated and will quit the collaboration. This paper aims to reduce the conflicts during the collaboration and im prove the productivity. It has three objectives: study the users’ behavior during the collaboration, evaluate the quality of textual merging results produced by specific algorithms and propose a solution to improve the r esult quality produced by the default merge tool of distributed version control systems. Through a study of eight open-source repositories totaling more than 3 million lines of code, we observe the behavior of the concurrent modifications during t he merge p rocedure. We i dentified when th e ex isting merge techniques under-perform, and we propose solutions to improve the quality of the merge. We finally compare with the traditional merge tool through a large corpus of collaborative editing.

Electron-ion recombination in merged beams

International Nuclear Information System (INIS)

Wolf, A.; Habs, D.; Lampert, A.; Neumann, R.; Schramm, U.; Schuessler, T.; Schwalm, D.

1993-01-01

Detailed studies of recombination processes between electrons and highly charged ions have become possible by recent improvements of merged-beams experiments. We discuss in particular measurements with stored cooled ion beams at the Test Storage Ring (TSR) in Heidelberg. The cross section of dielectronic recombination was measured with high energy resolution for few-electron systems up to the nuclear charge of Cu at a relative energy up to 2.6 keV. At low energy (∼0.1 eV) total recombination rates of several ions were measured and compared with calculated radiative recombination rates. Laser-stimulated recombination of protons and of C 6+ ions was investigated as a function of the photon energy using visible radiation. Both the total recombination rates and the stimulated recombination spectra indicate that in spite of the short interaction time in merged beams, also collisional capture of electrons into weakly bound levels (related to three-body recombination) could be important

Merging daily sea surface temperature data from multiple satellites using a Bayesian maximum entropy method

Science.gov (United States)

Tang, Shaolei; Yang, Xiaofeng; Dong, Di; Li, Ziwei

2015-12-01

Sea surface temperature (SST) is an important variable for understanding interactions between the ocean and the atmosphere. SST fusion is crucial for acquiring SST products of high spatial resolution and coverage. This study introduces a Bayesian maximum entropy (BME) method for blending daily SSTs from multiple satellite sensors. A new spatiotemporal covariance model of an SST field is built to integrate not only single-day SSTs but also time-adjacent SSTs. In addition, AVHRR 30-year SST climatology data are introduced as soft data at the estimation points to improve the accuracy of blended results within the BME framework. The merged SSTs, with a spatial resolution of 4 km and a temporal resolution of 24 hours, are produced in the Western Pacific Ocean region to demonstrate and evaluate the proposed methodology. Comparisons with in situ drifting buoy observations show that the merged SSTs are accurate and the bias and root-mean-square errors for the comparison are 0.15°C and 0.72°C, respectively.

Interaction region

International Nuclear Information System (INIS)

Anon.

1982-01-01

The Interaction Region Group addressed the basic questions of how to collide the SLC beams, how to maximize and monitor the luminosity, and how to minimize the detector backgrounds at the interaction region. In practice, five subgroups evolved to study these questions. The final focus group provided three alternative designs to acheive the 1 to 2 micron beam spot size required by the SLC, as well as studying other problems including: eta, eta' matching from the collider arcs, the implementation of soft bends near the interaction region, beam emittance growth, and magnet tolerances in the final focus. The beam position monitor group proposed two devices, a strip line monitor, and a beamstrahlung monitor, to bring the beams into collision. The luminosity monitor group reviewed the possible QED processes that would be insensitive to weak interaction (Z 0 ) effects. The beam dumping group proposed locations for kicker and septum magnets in the final focus that would achieve a high dumping efficiency and would meet the desired beam tolerances at the Moller scattering target in the beam dump line. Working with the Polarization Group, the Moller experiment was designed into the beam dump beam line. A beam dump was proposed that would maintain radiation backgrounds (penetrating muons) at acceptible levels. The detector backgrounds group proposed soft-bend and masking configurations to shield the detector from synchrotron radiation from the hard/soft bends and from the final focus quadrupoles and evaluated the effectiveness of these designs for the three final focus optics designs. Backgrounds were also estimated from: large angle synchrotron radiation, local and distant beam-gas interactions, 2-photon interactions, and from neutrons and backscattered photons from the beamstrahlung dump

Team Climate Inventory with a merged organization.

Science.gov (United States)

Dackert, Ingrid; Brenner, Sten-Olof; Johansson, Curt R

2002-10-01

The present study examines the team climate for innovation in work teams within a newly merged organization. Four teams working at a regional head office of a Social Insurance organization answered the Team Climate Inventory. The results were compared to those of a study by Agrell and Gustafson of more stable teams. The comparison showed that participative safety and support for innovation were rated lower and that vision was rated higher in the newly merged teams. The 38-item original inventory was used and based on the results, a 1999 proposed shortened version of 14 items by Kivimäki and Elovainio was compared with the original one. Analysis indicated that the short version can be a valid alternative to the original version but that further testing of the short version is needed.

Music and social bonding: ‘self-other’ merging and neurohormonal mechanisms

Directory of Open Access Journals (Sweden)

Bronwyn eTarr

2014-09-01

Full Text Available It has been suggested that a key function of music during its development and spread amongst human populations was its capacity to create and strengthen social bonds amongst interacting group members. However, the mechanisms by which this occurs have not been fully discussed. In this paper we review evidence supporting two thus far independently investigated mechanisms for this social bonding effect: self-other merging as a consequence of inter-personal synchrony, and the release of endorphins during exertive rhythmic activities including musical interaction. In general, self-other merging has been experimentally investigated using dyads, which provide limited insight into large-scale musical activities. Given that music can provide an external rhythmic framework that facilitates synchrony, explanations of social bonding during group musical activities should include reference to endorphins, which are released during synchronised exertive movements. Endorphins (and the Endogenous Opioid System (EOS in general are involved in social bonding across primate species, and are associated with a number of human social behaviours (e.g. laughter, synchronised sports, as well as musical activities (e.g. singing and dancing. Furthermore, passively listening to music engages the EOS, so here we suggest that both self-other merging and the EOS are important in the social bonding effects of music. In order to investigate possible interactions between these two mechanisms, future experiments should recreate ecologically valid examples of musical activities.

Merging of magnetic fields with field-aligned plasma flow components

International Nuclear Information System (INIS)

Mitchell, H.G. Jr.; Kan, J.R.

1978-01-01

The Sonnerup merging model for an incompressible plasma is extended to allow a flow component along the field lines in the inflow regions. Solutions are found to exist as long as the difference between the quantities B. V for the two inflow regions does not exceed a critical magnitude dependent on the inflow field magnitudes and plasma densities. All such solutions satisfy Vasyliunas' definition of merging, but some classes of solution have radically altered geometries, i.e. geometries in which the inflow regions are much smaller than the outflow regions. The necessary but not sufficient condition for these unusual geometries is that the field-aligned flow component in at least one inflow region be super-Alfvenic. A solution for the case of a vacuum field in one inflow region is obtained in which any flow velocity is allowed in the non-vacuum inflow region, although super-Alfvenic flow can still result in an unusual geometry. For symmetric configurations, the usual geometry, that of Petschek and Sonnerup, is retained as long as both field-aligned flow components in the inflow regions are less than twice the inflow Alfven speed. For the case of a vacuum field on one side and fields approximating the boundary between the solar wind and the earth's dayside magnetosphere, the usual geometry is retained for flow less than about 2.5 times the local Alfven speed. (author)

Merging and Splitting of Plasma Spheroids in a Dusty Plasma

Science.gov (United States)

Mikikian, Maxime; Tawidian, Hagop; Lecas, Thomas

2012-12-01

Dust particle growth in a plasma is a strongly disturbing phenomenon for the plasma equilibrium. It can induce many different types of low-frequency instabilities that can be experimentally observed, especially using high-speed imaging. A spectacular case has been observed in a krypton plasma where a huge density of dust particles is grown by material sputtering. The instability consists of well-defined regions of enhanced optical emission that emerge from the electrode vicinity and propagate towards the discharge center. These plasma spheroids have complex motions resulting from their mutual interaction that can also lead to the merging of two plasma spheroids into a single one. The reverse situation is also observed with the splitting of a plasma spheroid into two parts. These results are presented for the first time and reveal new behaviors in dusty plasmas.

Modeling the Compression of Merged Compact Toroids by Multiple Plasma Jets

Science.gov (United States)

Thio, Y. C. Francis; Knapp, Charles E.; Kirkpatrick, Ron; Rodgers, Stephen L. (Technical Monitor)

2000-01-01

A fusion propulsion scheme has been proposed that makes use of the merging of a spherical distribution of plasma jets to dynamically form a gaseous liner. The gaseous liner is used to implode a magnetized target to produce the fusion reaction in a standoff manner. In this paper, the merging of the plasma jets to form the gaseous liner is investigated numerically. The Los Alamos SPHINX code, based on the smoothed particle hydrodynamics method is used to model the interaction of the jets. 2-D and 3-D simulations have been performed to study the characteristics of the resulting flow when these jets collide. The results show that the jets merge to form a plasma liner that converge radially which may be used to compress the central plasma to fusion conditions. Details of the computational model and the SPH numerical methods will be presented together with the numerical results.

Merged neutral beams

Energy Technology Data Exchange (ETDEWEB)

Osterwalder, Andreas [Ecole Polytechnique Federale de Lausanne (EPFL), Institute for Chemical Sciences and Engineering, Lausanne (Switzerland)

2015-12-15

A detailed description of a merged beam apparatus for the study of low energy molecular scattering is given. This review is intended to guide any scientist who plans to construct a similar experiment, and to provide some inspiration in describing the approach we chose to our goal. In our experiment a supersonic expansion of paramagnetic particles is merged with one of polar molecules. A magnetic and an electric multipole guide are used to bend the two beams onto the same axis. We here describe in detail how the apparatus is designed, characterised, and operated. (orig.)

Automatic generation of data merging program codes.

OpenAIRE

Hyensook, Kim; Oussena, Samia; Zhang, Ying; Clark, Tony

2010-01-01

Data merging is an essential part of ETL (Extract-Transform-Load) processes to build a data warehouse system. To avoid rewheeling merging techniques, we propose a Data Merging Meta-model (DMM) and its transformation into executable program codes in the manner of model driven engineering. DMM allows defining relationships of different model entities and their merging types in conceptual level. Our formalized transformation described using ATL (ATLAS Transformation Language) enables automatic g...

DETECTION OF FLUX EMERGENCE, SPLITTING, MERGING, AND CANCELLATION OF NETWORK FIELD. I. SPLITTING AND MERGING

Energy Technology Data Exchange (ETDEWEB)

Iida, Y.; Yokoyama, T. [Department of Earth and Planetary Science, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Hagenaar, H. J. [Lockheed Martin Advanced Technology Center, Org. ADBS, Building 252, 3251 Hanover Street, Palo Alto, CA 94304 (United States)

2012-06-20

Frequencies of magnetic patch processes on the supergranule boundary, namely, flux emergence, splitting, merging, and cancellation, are investigated through automatic detection. We use a set of line-of-sight magnetograms taken by the Solar Optical Telescope (SOT) on board the Hinode satellite. We found 1636 positive patches and 1637 negative patches in the data set, whose time duration is 3.5 hr and field of view is 112'' Multiplication-Sign 112''. The total numbers of magnetic processes are as follows: 493 positive and 482 negative splittings, 536 positive and 535 negative mergings, 86 cancellations, and 3 emergences. The total numbers of emergence and cancellation are significantly smaller than those of splitting and merging. Further, the frequency dependence of the merging and splitting processes on the flux content are investigated. Merging has a weak dependence on the flux content with a power-law index of only 0.28. The timescale for splitting is found to be independent of the parent flux content before splitting, which corresponds to {approx}33 minutes. It is also found that patches split into any flux contents with the same probability. This splitting has a power-law distribution of the flux content with an index of -2 as a time-independent solution. These results support that the frequency distribution of the flux content in the analyzed flux range is rapidly maintained by merging and splitting, namely, surface processes. We suggest a model for frequency distributions of cancellation and emergence based on this idea.

OPTICAL-NEAR-INFRARED COLOR GRADIENTS AND MERGING HISTORY OF ELLIPTICAL GALAXIES

International Nuclear Information System (INIS)

Kim, Duho; Im, Myungshin

2013-01-01

It has been suggested that merging plays an important role in the formation and the evolution of elliptical galaxies. While gas dissipation by star formation is believed to steepen metallicity and color gradients of the merger products, mixing of stars through dissipation-less merging (dry merging) is believed to flatten them. In order to understand the past merging history of elliptical galaxies, we studied the optical-near-infrared (NIR) color gradients of 204 elliptical galaxies. These galaxies are selected from the overlap region of the Sloan Digital Sky Survey (SDSS) Stripe 82 and the UKIRT Infrared Deep Sky Survey (UKIDSS) Large Area Survey (LAS). The use of optical and NIR data (g, r, and K) provides large wavelength baselines, and breaks the age-metallicity degeneracy, allowing us to derive age and metallicity gradients. The use of the deep SDSS Stripe 82 images makes it possible for us to examine how the color/age/metallicity gradients are related to merging features. We find that the optical-NIR color and the age/metallicity gradients of elliptical galaxies with tidal features are consistent with those of relaxed ellipticals, suggesting that the two populations underwent a similar merging history on average and that mixing of stars was more or less completed before the tidal features disappeared. Elliptical galaxies with dust features have steeper color gradients than the other two types, even after masking out dust features during the analysis, which can be due to a process involving wet merging. More importantly, we find that the scatter in the color/age/metallicity gradients of the relaxed and merging feature types decreases as their luminosities (or masses) increase at M > 10 11.4 M ☉ but stays large at lower luminosities. Mean metallicity gradients appear nearly constant over the explored mass range, but a possible flattening is observed at the massive end. According to our toy model that predicts how the distribution of metallicity gradients

AUTOMATIC LUNG NODULE DETECTION BASED ON STATISTICAL REGION MERGING AND SUPPORT VECTOR MACHINES

Directory of Open Access Journals (Sweden)

Elaheh Aghabalaei Khordehchi

2017-06-01

Full Text Available Lung cancer is one of the most common diseases in the world that can be treated if the lung nodules are detected in their early stages of growth. This study develops a new framework for computer-aided detection of pulmonary nodules thorough a fully-automatic analysis of Computed Tomography (CT images. In the present work, the multi-layer CT data is fed into a pre-processing step that exploits an adaptive diffusion-based smoothing algorithm in which the parameters are automatically tuned using an adaptation technique. After multiple levels of morphological filtering, the Regions of Interest (ROIs are extracted from the smoothed images. The Statistical Region Merging (SRM algorithm is applied to the ROIs in order to segment each layer of the CT data. Extracted segments in consecutive layers are then analyzed in such a way that if they intersect at more than a predefined number of pixels, they are labeled with a similar index. The boundaries of the segments in adjacent layers which have the same indices are then connected together to form three-dimensional objects as the nodule candidates. After extracting four spectral, one morphological, and one textural feature from all candidates, they are finally classified into nodules and non-nodules using the Support Vector Machine (SVM classifier. The proposed framework has been applied to two sets of lung CT images and its performance has been compared to that of nine other competing state-of-the-art methods. The considerable efficiency of the proposed approach has been proved quantitatively and validated by clinical experts as well.

Strategic Mobility 21. Collaborative Regional Web Portal Design, Development and Documentation

National Research Council Canada - National Science Library

Mallon, Lawrence G; Carson, Steve

2007-01-01

...: a regional planning interface that makes data, models, and analyses available to all stakeholders in an interactive and configurable manner. An underlying theme of this report is the merging of Web 2.0 and knowledge management technologies with Service Oriented Architecture.

Interactive segmentation techniques algorithms and performance evaluation

CERN Document Server

He, Jia; Kuo, C-C Jay

2013-01-01

This book focuses on interactive segmentation techniques, which have been extensively studied in recent decades. Interactive segmentation emphasizes clear extraction of objects of interest, whose locations are roughly indicated by human interactions based on high level perception. This book will first introduce classic graph-cut segmentation algorithms and then discuss state-of-the-art techniques, including graph matching methods, region merging and label propagation, clustering methods, and segmentation methods based on edge detection. A comparative analysis of these methods will be provided

Aeroacoustics of T-junction merging flow.

Science.gov (United States)

Lam, G C Y; Leung, R C K; Tang, S K

2013-02-01

This paper reports a numerical study of the aeroacoustics of merging flow at T-junction. The primary focus is to elucidate the acoustic generation by the flow unsteadiness. The study is conducted by performing direct aeroacoustic simulation approach, which solves the unsteady compressible Navier-Stokes equations and the perfect gas equation of state simultaneously using the conservation element and solution element method. For practical flows, the Reynolds number based on duct width is usually quite high (>10(5)). In order to properly account for the effects of flow turbulence, a large eddy simulation methodology together with a wall modeling derived from the classical logarithm wall law is adopted. The numerical simulations are performed in two dimensions and the acoustic generation physics at different ratios of side-branch to main duct flow velocities VR (=0.5,0.67,1.0,2.0) are studied. Both the levels of unsteady interactions of merging flow structures and the efficiency of acoustic generation are observed to increase with VR. Based on Curle's analogy, the major acoustic source is found to be the fluctuating wall pressure induced by the flow unsteadiness occurred in the downstream branch. A scaling between the wall fluctuating force and the efficiency of the acoustic generation is also derived.

Merged ozone profiles from four MIPAS processors

Science.gov (United States)

Laeng, Alexandra; von Clarmann, Thomas; Stiller, Gabriele; Dinelli, Bianca Maria; Dudhia, Anu; Raspollini, Piera; Glatthor, Norbert; Grabowski, Udo; Sofieva, Viktoria; Froidevaux, Lucien; Walker, Kaley A.; Zehner, Claus

2017-04-01

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) was an infrared (IR) limb emission spectrometer on the Envisat platform. Currently, there are four MIPAS ozone data products, including the operational Level-2 ozone product processed at ESA, with the scientific prototype processor being operated at IFAC Florence, and three independent research products developed by the Istituto di Fisica Applicata Nello Carrara (ISAC-CNR)/University of Bologna, Oxford University, and the Karlsruhe Institute of Technology-Institute of Meteorology and Climate Research/Instituto de Astrofísica de Andalucía (KIT-IMK/IAA). Here we present a dataset of ozone vertical profiles obtained by merging ozone retrievals from four independent Level-2 MIPAS processors. We also discuss the advantages and the shortcomings of this merged product. As the four processors retrieve ozone in different parts of the spectra (microwindows), the source measurements can be considered as nearly independent with respect to measurement noise. Hence, the information content of the merged product is greater and the precision is better than those of any parent (source) dataset. The merging is performed on a profile per profile basis. Parent ozone profiles are weighted based on the corresponding error covariance matrices; the error correlations between different profile levels are taken into account. The intercorrelations between the processors' errors are evaluated statistically and are used in the merging. The height range of the merged product is 20-55 km, and error covariance matrices are provided as diagnostics. Validation of the merged dataset is performed by comparison with ozone profiles from ACE-FTS (Atmospheric Chemistry Experiment-Fourier Transform Spectrometer) and MLS (Microwave Limb Sounder). Even though the merging is not supposed to remove the biases of the parent datasets, around the ozone volume mixing ratio peak the merged product is found to have a smaller (up to 0.1 ppmv

The 2003 Merged Model for Vietnam

DEFF Research Database (Denmark)

Jensen, Henning Tarp; Tarp, Finn

This monograph documents the 2003 Merged Model for Vietnam. The initialization and calibration of the model is based on a financial 2003 SAM framework and an auxiliary 2002-3 data set. The recursive nature of the solution of the Merged Model is discussed with reference to the four main sectors...

Merging startup experiments on the UTST spherical tokamak

International Nuclear Information System (INIS)

Yamada, Takuma; Kamio, Shuji; Imazawa, Ryota

2010-01-01

The University of Tokyo Spherical Tokamak (UTST) was constructed to explore the formation of ultrahigh-beta spherical tokamak (ST) plasmas using double null plasma merging. The main feature of the UTST is that the poloidal field coils are located outside the vacuum vessel to demonstrate startup in a reactor-relevant situation. Initial operations used partially completed power supplies to investigate the appropriate conditions for plasma merging. The plasma current of the merged ST reached 100 kA when the central solenoid coil was used to assist plasma formation. Merging of two ST plasmas through magnetic reconnection was successfully observed using two-dimensional pickup coil arrays, which directly measure the toroidal and axial magnetic fields inside the UTST vacuum vessel. The resistivity of the current sheet was found to be anomalously high during merging. (author)

Modeling cooperative driving behavior in freeway merges.

Science.gov (United States)

2011-11-01

Merging locations are major sources of freeway bottlenecks and are therefore important for freeway operations analysis. Microscopic simulation tools have been successfully used to analyze merging bottlenecks and to design optimum geometric configurat...

On-the Fly Merging of Attitude Solutions

DEFF Research Database (Denmark)

Jørgensen, Peter Siegbjørn; Jørgensen, John Leif; Denver, Troelz

2008-01-01

Recent advances in autonomous attitude determination instrumentation enable even small satellites flying fully autonomous multi head star trackers providing full accurate and robust attitude information. Each sensor provides the full attitude information but for robustness and optimal usage...... of the available information, i.e. optimal accuracy, methods for merging such data should be investigated. The need for and desirability of attitude merging depends on the mission objective and available resources. To enable real-time attitude control and reduce requirements on download budget, on-board merging...... of attitude data will often be advantageous. This should be weighted against the need for post observation reconstruction of attitudes, especially needed when end products are sensitive to optimal attitude reconstruction. Instrument integrated merging algorithms will reduce the complexity of on-board AOCS...

Aeromagnetic map compilation: procedures for merging and an example from Washington

Directory of Open Access Journals (Sweden)

C. Finn

2000-06-01

Full Text Available Rocks in Antarctica and offshore have widely diverse magnetic properties. Consequently, aeromagnetic data collected there can improve knowledge of the geologic, tectonic and geothermal characteristics of the region. Aeromagnetic data can map concealed structures such as faults, folds and dikes, ascertain basin thickness and locate buried volcanic, as well as some intrusive and metamorphic rocks. Gridded, composite data sets allow a view of continental-scale trends that individual data sets do not provide and link widely-separated areas of outcrop and disparate geologic studies. Individual magnetic surveys must be processed so that they match adjacent surveys prior to merging. A consistent representation of the Earth's magnetic field (International Geomagnetic Reference Field (IGRF must be removed from each data set. All data sets need to be analytically continued to the same flight elevation with their datums shifted to match adjacent data. I advocate minimal processing to best represent the individual surveys in the merged compilation. An example of a compilation of aeromagnetic surveys from Washington illustrates the utility of aeromagnetic maps for providing synoptic views of regional tectonic features.

The half-wave rectifier response of the magnetosphere and antiparallel merging

Science.gov (United States)

Crooker, N. U.

1980-01-01

In some ways the magnetosphere behaves as if merging occurs only when the interplanetary magnetic field (IMF) is southward, and in other ways it behaves as if merging occurs for all IMF orientations. An explanation of this duality is offered in terms of a geometrical antiparallel merging model which predicts merging for all IMF orientations but magnetic flux transfer to the tail only for southward IMF. This is in contrast to previous models of component merging, where merging and flux transfer occur together for nearly all IMF orientations. That the problematic duality can be explained by the model is compelling evidence that antiparallel merging should be seriously considered in constructing theories of the merging process.

Experiments on CT plasma merging in the CTCC-1

International Nuclear Information System (INIS)

Watanabe, K.; Ikegami, K.; Nishikawa, M.; Ozaki, A.; Satomi, N.; Uyama, T.

1982-01-01

A compact toroid (CT) plasma merging experiment has been tried preliminarily in the CTCC-1 experiment as a method for further-heating of CT, on producing two CT plasmas in the flux conserver successively. Two CT plasmas were observed really to merge with each other in the flux conserver. In the merging process, it is found that the field reconnection of surface magnetic field lines of CT is completed until 30 μs after the second CT injection, but magnetic field lines around the center of CT merge slowly, taking about 100 μs. Experimental results indicate that merging of CT results in doubled addition of toroidal fluxes and no-addition of poloidal fluxes

Merging and splitting of Bose-Einstein condensates into two translating traps

International Nuclear Information System (INIS)

Sun, B; Pindzola, M S

2009-01-01

We investigate the process of merging and splitting Bose-Einstein condensates into two slowly translating traps, analogous to a dual input atomic beam splitter. With the help of direct three-dimensional numerical simulations, we explore the dependence of population distributions on the initial relative phase and the trap moving speed. For non-interacting Bose-Einstein condensates, we find that our numerical results are in good agreement with a simple theoretical prediction. However, for interacting Bose-Einstein condensates, our results show striking differences with the non-interacting case: the Bose-Einstein condensates are always split towards 50:50 in the slow translation regime. This bosonic anti-bunching effect is interpreted as a consequence of complicated flow patterns due to atomic interactions.

Solar wind stream interaction regions throughout the heliosphere

Science.gov (United States)

Richardson, Ian G.

2018-01-01

This paper focuses on the interactions between the fast solar wind from coronal holes and the intervening slower solar wind, leading to the creation of stream interaction regions that corotate with the Sun and may persist for many solar rotations. Stream interaction regions have been observed near 1 AU, in the inner heliosphere (at ˜ 0.3-1 AU) by the Helios spacecraft, in the outer and distant heliosphere by the Pioneer 10 and 11 and Voyager 1 and 2 spacecraft, and out of the ecliptic by Ulysses, and these observations are reviewed. Stream interaction regions accelerate energetic particles, modulate the intensity of Galactic cosmic rays and generate enhanced geomagnetic activity. The remote detection of interaction regions using interplanetary scintillation and white-light imaging, and MHD modeling of interaction regions will also be discussed.

Seamless-merging-oriented parallel inverse lithography technology

International Nuclear Information System (INIS)

Yang Yiwei; Shi Zheng; Shen Shanhu

2009-01-01

Inverse lithography technology (ILT), a promising resolution enhancement technology (RET) used in next generations of IC manufacture, has the capability to push lithography to its limit. However, the existing methods of ILT are either time-consuming due to the large layout in a single process, or not accurate enough due to simply block merging in the parallel process. The seamless-merging-oriented parallel ILT method proposed in this paper is fast because of the parallel process; and most importantly, convergence enhancement penalty terms (CEPT) introduced in the parallel ILT optimization process take the environment into consideration as well as environmental change through target updating. This method increases the similarity of the overlapped area between guard-bands and work units, makes the merging process approach seamless and hence reduces hot-spots. The experimental results show that seamless-merging-oriented parallel ILT not only accelerates the optimization process, but also significantly improves the quality of ILT.

A Numerical Study of Vortex and Precipitating Cloud Merging in Middle Latitudes

Institute of Scientific and Technical Information of China (English)

PING Fan; LUO Zhe-Xian; JU Jian-Hua

2006-01-01

@@ We mainly focus on the study of precipitating cloud merging associated with vortex merging. The vortex and precipitating cloud merging are simulated by the cloud resolving model from 0000 21 to 1800 23 July 2003. The results show that the model well simulates vortex circulation associated with precipitating clouds. It is also proven that the vortex merging follows the precipitating cloud merging although vortices show the spatial and temporal differences. The convection vorticity vector is introduced to describe the merging processes. Two merging cases are identified during the 42-h simulation and are studied.

Merging and energy exchange between optical filaments

Energy Technology Data Exchange (ETDEWEB)

Georgieva, D. A., E-mail: dgeorgieva@tu-sofia.bg [Faculty of Applied Mathematics and Computer Science, Technical University of Sofia, 8 Kliment Ohridski Blvd., 1000 Sofia (Bulgaria); Kovachev, L. M. [Institute of Electronics, Bulgarian Academy of Sciences, 72 Tzarigradcko Chaussee Blvd., 1784 Sofia (Bulgaria)

2015-10-28

We investigate nonlinear interaction between collinear femtosecond laser pulses with power slightly above the critical for self-focusing P{sub cr} trough the processes of cross-phase modulation (CPM) and degenerate four-photon parametric mixing (FPPM). When there is no initial phase difference between the pulses we observe attraction between pulses due to CPM. The final result is merging between the pulses in a single filament with higher power. By method of moments it is found that the attraction depends on the distance between the pulses and has potential character. In the second case we study energy exchange between filaments. This process is described through FPPM scheme and requests initial phase difference between the waves.

Solar wind interaction with comet 67P: Impacts of corotating interaction regions

Science.gov (United States)

Edberg, N. J. T.; Eriksson, A. I.; Odelstad, E.; Vigren, E.; Andrews, D. J.; Johansson, F.; Burch, J. L.; Carr, C. M.; Cupido, E.; Glassmeier, K.-H.; Goldstein, R.; Halekas, J. S.; Henri, P.; Koenders, C.; Mandt, K.; Mokashi, P.; Nemeth, Z.; Nilsson, H.; Ramstad, R.; Richter, I.; Wieser, G. Stenberg

2016-02-01

We present observations from the Rosetta Plasma Consortium of the effects of stormy solar wind on comet 67P/Churyumov-Gerasimenko. Four corotating interaction regions (CIRs), where the first event has possibly merged with a coronal mass ejection, are traced from Earth via Mars (using Mars Express and Mars Atmosphere and Volatile EvolutioN mission) to comet 67P from October to December 2014. When the comet is 3.1-2.7 AU from the Sun and the neutral outgassing rate ˜1025-1026 s-1, the CIRs significantly influence the cometary plasma environment at altitudes down to 10-30 km. The ionospheric low-energy (˜5 eV) plasma density increases significantly in all events, by a factor of >2 in events 1 and 2 but less in events 3 and 4. The spacecraft potential drops below -20 V upon impact when the flux of electrons increases. The increased density is likely caused by compression of the plasma environment, increased particle impact ionization, and possibly charge exchange processes and acceleration of mass-loaded plasma back to the comet ionosphere. During all events, the fluxes of suprathermal (˜10-100 eV) electrons increase significantly, suggesting that the heating mechanism of these electrons is coupled to the solar wind energy input. At impact the magnetic field strength in the coma increases by a factor of 2-5 as more interplanetary magnetic field piles up around the comet. During two CIR impact events, we observe possible plasma boundaries forming, or moving past Rosetta, as the strong solar wind compresses the cometary plasma environment. We also discuss the possibility of seeing some signatures of the ionospheric response to tail disconnection events.

Cluster Physics with Merging Galaxy Clusters

Directory of Open Access Journals (Sweden)

Sandor M. Molnar

2016-02-01

Full Text Available Collisions between galaxy clusters provide a unique opportunity to study matter in a parameter space which cannot be explored in our laboratories on Earth. In the standard LCDM model, where the total density is dominated by the cosmological constant ($Lambda$ and the matter density by cold dark matter (CDM, structure formation is hierarchical, and clusters grow mostly by merging.Mergers of two massive clusters are the most energetic events in the universe after the Big Bang,hence they provide a unique laboratory to study cluster physics.The two main mass components in clusters behave differently during collisions:the dark matter is nearly collisionless, responding only to gravity, while the gas is subject to pressure forces and dissipation, and shocks and turbulenceare developed during collisions. In the present contribution we review the different methods used to derive the physical properties of merging clusters. Different physical processes leave their signatures on different wavelengths, thusour review is based on a multifrequency analysis. In principle, the best way to analyze multifrequency observations of merging clustersis to model them using N-body/HYDRO numerical simulations. We discuss the results of such detailed analyses.New high spatial and spectral resolution ground and space based telescopeswill come online in the near future. Motivated by these new opportunities,we briefly discuss methods which will be feasible in the near future in studying merging clusters.

Individual Subjective Initiative Merge Model Based on Cellular Automaton

Directory of Open Access Journals (Sweden)

Yin-Jie Xu

2013-01-01

Full Text Available The merge control models proposed for work zones are classified into two types (Hard Control Merge (HCM model and Soft Control Merge (SCM model according to their own control intensity and are compared with a new model, called Individual Subjective Initiative Merge (ISIM model, which is based on the linear lane-changing probability strategy in the merging area. The attention of this paper is paid to the positive impact of the individual subjective initiative for the whole traffic system. Three models (ISIM, HCM, and SCM are established and compared with each other by two order parameters, that is, system output and average vehicle travel time. Finally, numerical results show that both ISIM and SCM perform better than HCM. Compared with SCM, the output of ISIM is 20 vehicles per hour higher under the symmetric input condition and is more stable under the asymmetric input condition. Meanwhile, the average travel time of ISIM is 2000 time steps less under the oversaturated input condition.

A TALE OF TWO NARROW-LINE REGIONS: IONIZATION, KINEMATICS, AND SPECTRAL ENERGY DISTRIBUTIONS FOR A LOCAL PAIR OF MERGING OBSCURED ACTIVE GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Hainline, Kevin N.; Hickox, Ryan C.; Chen, Chien-Ting; Carroll, Christopher M.; Jones, Mackenzie L.; Zervos, Alexandros S. [Department of Physics and Astronomy, Dartmouth College, Hanover, NH 03755 (United States); Goulding, Andrew D. [Department Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States)

2016-05-20

We explore the gas ionization and kinematics, as well as the optical-IR spectral energy distributions for UGC 11185, a nearby pair of merging galaxies hosting obscured active galactic nuclei (AGNs), also known as SDSS J181611.72+423941.6 and J181609.37+423923.0 (J1816NE and J1816SW, z ≈ 0.04). Due to the wide separation between these interacting galaxies (∼23 kpc), observations of these objects provide a rare glimpse of the concurrent growth of supermassive black holes at an early merger stage. We use BPT line diagnostics to show that the full extent of the narrow-line emission in both galaxies is photoionized by an AGN, and confirm the existence of a 10 kpc-scale ionization cone in J1816NE, while in J1816SW the AGN narrow-line region is much more compact (1–2 kpc) and relatively undisturbed. Our observations also reveal the presence of ionized gas that nearly spans the entire distance between the galaxies, which is likely in a merger-induced tidal stream. In addition, we carry out a spectral analysis of the X-ray emission using data from XMM-Newton . These galaxies represent a useful pair to explore how the [O iii] luminosity of an AGN is dependent on the size of the region used to explore the extended emission. Given the growing evidence for AGN “flickering” over short timescales, we speculate that the appearances and impacts of these AGNs may change multiple times over the course of the galaxy merger, which is especially important given that these objects are likely the progenitors of the types of systems commonly classified as “dual AGNs.”.

Satellite and gauge rainfall merging using geographically weighted regression

Directory of Open Access Journals (Sweden)

Q. Hu

2015-05-01

Full Text Available A residual-based rainfall merging scheme using geographically weighted regression (GWR has been proposed. This method is capable of simultaneously blending various satellite rainfall data with gauge measurements and could describe the non-stationary influences of geographical and terrain factors on rainfall spatial distribution. Using this new method, an experimental study on merging daily rainfall from the Climate Prediction Center Morphing dataset (CMOROH and gauge measurements was conducted for the Ganjiang River basin, in Southeast China. We investigated the capability of the merging scheme for daily rainfall estimation under different gauge density. Results showed that under the condition of sparse gauge density the merging rainfall scheme is remarkably superior to the interpolation using just gauge data.

Merging airborne and carborne radiometric data for surveying the Deir Az-Zor area, Syria

International Nuclear Information System (INIS)

Jubeli, Y.M.; Aissa, M.; Al-Hent, R.

1997-01-01

To complete the radiometric map of Syria, and to estimate the natural background radiation levels for environmental monitoring, a carborne survey was undertaken over the Deir Az-Zor area. This area was not covered by a previous airborne survey, except for peripheral regions in the south and west. To complete the radiometric map, results of the carborne and airborne surveys had to be merged. This paper presents the merging procedure which was used after normalizing the two data sets to match each other. No anomalies suitable for radioelement exploration were found. However, the overall radiometric maps resulting from the present work were consistent with the maps of the areas covered by the airborne survey. (author)

What was the Initial Mass of Merging Black Holes in GW150914 ?

Science.gov (United States)

Tagawa, Hiromichi; Umemura, Masayuki

Recently, the Laser Interferometer Gravitational-Wave Observatory (LIGO) has detected the gravitational wave (GW) event, GW150914, as a result of the merger of a ~30 M ⊙ black hole (BH) binary. So far, the merger of stellar-mass BHs has been thought to result from the evolution of binary stars. Here, we propose a novel path of the merger stemming from non-binary isolated stars. In our previous studies, we have found that multiple non-binary stellar-mass BHs whose separations are larger than 1000 AU can merge with each other under the gas-rich environments through the gas dynamical friction and three-body interaction. In this case, a considerable amount of gas can accrete onto BHs before the merger, that is, the initial mass of BHs can be lower than 30 M ⊙. To explore this possibility, we perform post-Newtonian N-body simulations on mergers of accreting stellar-mass BHs. Based on our simulations, we find that the BH merger in GW150914 from smaller seed BHs is likely to occur in galactic nuclear regions or dense interstellar cloud cores. Furthermore, we roughly estimate event rates to be ~0.4 yr-1 in galactic nuclear regions and ~8 yr-1 in dense interstellar cloud cores.

Modeling merging behavior at lane drops : [tech transfer summary].

Science.gov (United States)

2015-02-01

A better understanding of the merging behavior of drivers will lead : to the development of better lane-drop traffic-control plans and : strategies, which will provide better guidance to drivers for safer : merging.

Wavelength-Adaptive Dehazing Using Histogram Merging-Based Classification for UAV Images

Directory of Open Access Journals (Sweden)

Inhye Yoon

2015-03-01

Full Text Available Since incoming light to an unmanned aerial vehicle (UAV platform can be scattered by haze and dust in the atmosphere, the acquired image loses the original color and brightness of the subject. Enhancement of hazy images is an important task in improving the visibility of various UAV images. This paper presents a spatially-adaptive dehazing algorithm that merges color histograms with consideration of the wavelength-dependent atmospheric turbidity. Based on the wavelength-adaptive hazy image acquisition model, the proposed dehazing algorithm consists of three steps: (i image segmentation based on geometric classes; (ii generation of the context-adaptive transmission map; and (iii intensity transformation for enhancing a hazy UAV image. The major contribution of the research is a novel hazy UAV image degradation model by considering the wavelength of light sources. In addition, the proposed transmission map provides a theoretical basis to differentiate visually important regions from others based on the turbidity and merged classification results.

Wavelength-adaptive dehazing using histogram merging-based classification for UAV images.

Science.gov (United States)

Yoon, Inhye; Jeong, Seokhwa; Jeong, Jaeheon; Seo, Doochun; Paik, Joonki

2015-03-19

Since incoming light to an unmanned aerial vehicle (UAV) platform can be scattered by haze and dust in the atmosphere, the acquired image loses the original color and brightness of the subject. Enhancement of hazy images is an important task in improving the visibility of various UAV images. This paper presents a spatially-adaptive dehazing algorithm that merges color histograms with consideration of the wavelength-dependent atmospheric turbidity. Based on the wavelength-adaptive hazy image acquisition model, the proposed dehazing algorithm consists of three steps: (i) image segmentation based on geometric classes; (ii) generation of the context-adaptive transmission map; and (iii) intensity transformation for enhancing a hazy UAV image. The major contribution of the research is a novel hazy UAV image degradation model by considering the wavelength of light sources. In addition, the proposed transmission map provides a theoretical basis to differentiate visually important regions from others based on the turbidity and merged classification results.

Merging of airborne gravity and gravity derived from satellite altimetry: Test cases along the coast of greenland

DEFF Research Database (Denmark)

Olesen, Arne Vestergaard; Andersen, Ole Baltazar; Tscherning, C.C.

2002-01-01

for the use of gravity data especially, when computing geoid models in coastal regions. The presence of reliable marine gravity data for independent control offers an opportunity to study procedures for the merging of airborne and satellite data around Greenland. Two different merging techniques, both based......The National Survey and Cadastre - Denmark (KMS) has for several years produced gravity anomaly maps over the oceans derived from satellite altimetry. During the last four years, KMS has also conducted airborne gravity surveys along the coast of Greenland dedicated to complement the existing...... onshore gravity coverage and fill in new data in the very-near coastal area, where altimetry data may contain gross errors. The airborne surveys extend from the coastline to approximately 100 km offshore, along 6000 km of coastline. An adequate merging of these different data sources is important...

Application studies of spherical tokamak plasma merging

International Nuclear Information System (INIS)

Ono, Yasushi; Inomoto, Michiaki

2012-01-01

The experiment of plasma merging and heating has long history in compact torus studies since Wells. The study of spherical tokamak (ST), starting from TS-3 plasma merging experiment of Tokyo University in the late 1980s, is followed by START of Culham laboratory in the 1900s, TS-4 and UTST of Tokyo University and MAST of Culham laboratory in the 2000s, and last year by VEST of Soul University. ST has the following advantages: 1) plasma heating by magnetic reconnection at a MW-GW level, 2) rapid start-up of high beta plasma, 3) current drive/flux multiplication and distribution control of ST plasma, 4) fueling and helium-ash exhaust. In the present article, we emphasize that magnetic reconnection and plasma merging phenomena are important in ST plasma study as well as in plasma physics. (author)

Cosmic Collisions The Hubble Atlas of Merging Galaxies

CERN Document Server

Christensen, Lars Lindberg; Martin, Davide

2009-01-01

Lars Lindberg Christensen, Raquel Yumi Shida & Davide De Martin Cosmic Collisions: The Hubble Atlas of Merging Galaxies Like majestic ships in the grandest night, galaxies can slip ever closer until their mutual gravitational interaction begins to mold them into intricate figures that are finally, and irreversibly, woven together. It is an immense cosmic dance, choreographed by gravity. Cosmic Collisions contains a hundred new, many thus far unpublished, images of colliding galaxies from the NASA/ESA Hubble Space Telescope. It is believed that many present-day galaxies, including the Milky Way, were assembled from such a coalescence of smaller galaxies, occurring over billions of years. Triggered by the colossal and violent interaction between the galaxies, stars form from large clouds of gas in firework bursts, creating brilliant blue star clusters. The importance of these cosmic encounters reaches far beyond the stunning Hubble images. They may, in fact, be among the most important processes that shape ...

Heating properties of merging/reconnection startup of high-beta ST

International Nuclear Information System (INIS)

Ono, Yasushi

2005-01-01

The high-power reconnection heating of spherical tokamak (ST) has been studied in the TS-3 experiment by use of axial merging of two STs. In this method, the merging/magnetic reconnection transformed a part of magnetic energy of merging STs into their thermal energy within short reconnection time. Our present low-field merging (0.3-0.5kG, R∼0.2m) attained the maximum heating power of 4-10MW and increased the beta-values of STs by factor 2-3 transiently. The ion heating energy was found to increase inversely with the q-value (B t component) of two STs. The most probable cause for this dependence is fast reconnection speed/ outflow speed due to large anomalous resistivity of current sheet in low-q state. After merging startup, decrease in beta was observed especially in low-q STs, indicating that the final beta value of ST increased with the q-value. (author)

Synchrotron Radiation in eRHIC Interaction Region

CERN Document Server

Beebe-Wang, Joanne; Montag, Christoph; Rondeau, Daniel J; Surrow, Bernd

2005-01-01

The eRHIC currently under study at BNL consists of an electron storage ring added to the existing RHIC complex. The interaction region of this facility has to provide the required low-beta focusing while accommodating the synchrotron radiation generated by beam separation close to the interaction point. In the current design, the synchrotron radiation caused by 10GeV electrons bent by low-beta triplet magnets will be guided through the interaction region and dumped 5m downstream. However, it is unavoidable to stop a fraction of the photons at the septum where the electron and ion vacuum system are separated. In order to protect the septum and minimize the backward scattering of the synchrotron radiation, an absorber and collimation system will be employed. In this paper, we first present the overview of the current design of the eRHIC interaction region with special emphasis on the synchrotron radiation. Then the initial design of the absorber and collimation system, including their geometrical and physical p...

Reconnection and merging of positive streamers in air

Energy Technology Data Exchange (ETDEWEB)

Nijdam, S; Geurts, C G C; Van Veldhuizen, E M; Ebert, U, E-mail: s.nijdam@tue.n [Department of Applied Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands)

2009-02-21

Pictures show that streamer or sprite discharge channels emerging from the same electrode sometimes seem to reconnect or merge though their heads carry electric charge of the same polarity; one might therefore suspect that reconnections are an artefact of the two-dimensional projection in the pictures. Here we use stereo photography to investigate the full three-dimensional structure of such events. We analyse reconnection, possibly an electrostatic effect in which a late thin streamer reconnects to an earlier thick streamer channel, and merging, a suggested photoionization effect in which two simultaneously propagating streamer heads merge into one new streamer. We use four different anode geometries (one tip, two tips, two asymmetric protrusions in a plate and a wire), placed 40 mm above a flat cathode plate in ambient air. A positive high voltage pulse is applied to the anode, creating a positive corona discharge. This discharge is studied with a fast ICCD camera, in many cases combined with optics to enable stereoscopic imaging. We find that reconnections as defined above occur frequently. Merging on the other hand was only observed at a pressure of 25 mbar and a tip separation of 2 mm, i.e. for a reduced tip distance of p{center_dot}d = 50 {mu}m bar. In this case the full width at half maximum of the streamer channel is more than 10 times as large as the tip separation. At higher pressures or with a wire anode, merging was not observed.

Reconnection and merging of positive streamers in air

International Nuclear Information System (INIS)

Nijdam, S; Geurts, C G C; Van Veldhuizen, E M; Ebert, U

2009-01-01

Pictures show that streamer or sprite discharge channels emerging from the same electrode sometimes seem to reconnect or merge though their heads carry electric charge of the same polarity; one might therefore suspect that reconnections are an artefact of the two-dimensional projection in the pictures. Here we use stereo photography to investigate the full three-dimensional structure of such events. We analyse reconnection, possibly an electrostatic effect in which a late thin streamer reconnects to an earlier thick streamer channel, and merging, a suggested photoionization effect in which two simultaneously propagating streamer heads merge into one new streamer. We use four different anode geometries (one tip, two tips, two asymmetric protrusions in a plate and a wire), placed 40 mm above a flat cathode plate in ambient air. A positive high voltage pulse is applied to the anode, creating a positive corona discharge. This discharge is studied with a fast ICCD camera, in many cases combined with optics to enable stereoscopic imaging. We find that reconnections as defined above occur frequently. Merging on the other hand was only observed at a pressure of 25 mbar and a tip separation of 2 mm, i.e. for a reduced tip distance of p·d = 50 μm bar. In this case the full width at half maximum of the streamer channel is more than 10 times as large as the tip separation. At higher pressures or with a wire anode, merging was not observed.

Super magnets for interaction regions

International Nuclear Information System (INIS)

Biallas, G.; Fowler, W.; Diebold, R.

1977-01-01

The feasibility of using superconducting magnets in the beam interaction regions of particle accelerators is discussed. These higher field magnets can be shorter, leaving more room for detectors, but also must have a large aperture and magnetic shielding. The ''kissing geometry'' was investigated, and design and scaling considerations are given. A rough estimate of the cost of such superconducting magnets is given as an aid to the selection of interaction geometry

Plan Merging : Experimental results

NARCIS (Netherlands)

De Weerdt, M.M.; Van der Krogt, R.P.J.; Zutt, J.

2003-01-01

In this paper we discuss the results of a plan merging algorithm. This algorithm coordinates the plans of multiple, autonomous agents, each able to independently find a plan. This algorithm is evaluated using realistic data from a taxi company. We show that when we allow passengers to be a few

Integrating multisensor satellite data merging and image reconstruction in support of machine learning for better water quality management.

Science.gov (United States)

Chang, Ni-Bin; Bai, Kaixu; Chen, Chi-Farn

2017-10-01

Monitoring water quality changes in lakes, reservoirs, estuaries, and coastal waters is critical in response to the needs for sustainable development. This study develops a remote sensing-based multiscale modeling system by integrating multi-sensor satellite data merging and image reconstruction algorithms in support of feature extraction with machine learning leading to automate continuous water quality monitoring in environmentally sensitive regions. This new Earth observation platform, termed "cross-mission data merging and image reconstruction with machine learning" (CDMIM), is capable of merging multiple satellite imageries to provide daily water quality monitoring through a series of image processing, enhancement, reconstruction, and data mining/machine learning techniques. Two existing key algorithms, including Spectral Information Adaptation and Synthesis Scheme (SIASS) and SMart Information Reconstruction (SMIR), are highlighted to support feature extraction and content-based mapping. Whereas SIASS can support various data merging efforts to merge images collected from cross-mission satellite sensors, SMIR can overcome data gaps by reconstructing the information of value-missing pixels due to impacts such as cloud obstruction. Practical implementation of CDMIM was assessed by predicting the water quality over seasons in terms of the concentrations of nutrients and chlorophyll-a, as well as water clarity in Lake Nicaragua, providing synergistic efforts to better monitor the aquatic environment and offer insightful lake watershed management strategies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Why healthcare providers merge.

Science.gov (United States)

Postma, Jeroen; Roos, Anne-Fleur

2016-04-01

In many OECD countries, healthcare sectors have become increasingly concentrated as a result of mergers. However, detailed empirical insight into why healthcare providers merge is lacking. Also, we know little about the influence of national healthcare policies on mergers. We fill this gap in the literature by conducting a survey study on mergers among 848 Dutch healthcare executives, of which 35% responded (resulting in a study sample of 239 executives). A total of 65% of the respondents was involved in at least one merger between 2005 and 2012. During this period, Dutch healthcare providers faced a number of policy changes, including increasing competition, more pressure from purchasers, growing financial risks, de-institutionalisation of long-term care and decentralisation of healthcare services to municipalities. Our empirical study shows that healthcare providers predominantly merge to improve the provision of healthcare services and to strengthen their market position. Also efficiency and financial reasons are important drivers of merger activity in healthcare. We find that motives for merger are related to changes in health policies, in particular to the increasing pressure from competitors, insurers and municipalities.

Merged reality for everyone

OpenAIRE

Carvalho, Fausto de; Morgado, Leonel

2017-01-01

This article addresses some interesting challenges and business opportunities within the promising merged reality ecosystem, which offers the vision of bringing together virtual, augmented and physical realities, seamlessly. The article also links the current status of this field with exploratory research and development work carried out by Altice Labs. Altice Labs info:eu-repo/semantics/publishedVersion

Interpreting quantum discord through quantum state merging

International Nuclear Information System (INIS)

Madhok, Vaibhav; Datta, Animesh

2011-01-01

We present an operational interpretation of quantum discord based on the quantum state merging protocol. Quantum discord is the markup in the cost of quantum communication in the process of quantum state merging, if one discards relevant prior information. Our interpretation has an intuitive explanation based on the strong subadditivity of von Neumann entropy. We use our result to provide operational interpretations of other quantities like the local purity and quantum deficit. Finally, we discuss in brief some instances where our interpretation is valid in the single-copy scenario.

Observations in the Earth's magnetotail relating to magnetic merging

International Nuclear Information System (INIS)

Hones, E.W. Jr.

1976-01-01

For more than a decade there has been growing conviction that the burst of energy from a solar flare is first stored in magnetic fields and is then released rapidly by magnetic field annihilation (magnetic merging). There has also been recognition that magnetic merging may be responsible for the energy release manifested in auroral phenomena at the Earth. The most substantial evidence that magnetic merging does indeed occur in the Earth's magnetosphere and causes the auroral phenomena is provided by recent observations, in the magnetotail, of very rapid (approximately 500 km s -1 ) tailward, then earthward, flow of plasma during magnetospheric substorms. The observations, made with the Vela and IMP satellites, reveal also that the component of the tail magnetic field perpendicular to the tail neutral sheet changes polarity at the time of the reversal of plasma flow. These features are interpreted as indicative of passage of a magnetic neutral line, at which magnetic merging is proceeding, past the observing satellite. This paper describes an example of such observations made with IMP 6. It is anticipated that such systematic measurements of the plasma, energetic particles and magnetic field in the neighborhood of the passing neutral line on many such occasions will provide a general understanding of the magnetic merging process which can be applied to studies of solar flares and other astrophysical phenomena. (Auth.)

HARMONIOUS INTERACTION AMONG ETHNICAL COMMUNITIES IN REGIONAL DEVELOPMENT

Directory of Open Access Journals (Sweden)

Sismudjito .

2013-12-01

Full Text Available This research was conducted in 13 villages of Secanggang district, North Sumatra Province-Indonesia. This study describes the capacity and condition of harmonious interaction among ethnical communities in regional development, which focuses on villager motivation as intervening variables. Motivation is a very important instrument in bridging the concepts of harmony among communities towards regional development. Development of a region is implemented through harmonious interaction among various ethnic communities that can serve motivation as an intervening variable. This study uses a combination of qualitative (exploratory and quantitative method.  There is one factor that plays a role as a determinant factor in causing successful development. The interaction, either directly or indirectly, generates assimilation between ethnical cultures.

Colliding winds: Interaction regions with strong heat conduction

International Nuclear Information System (INIS)

Imamura, J.N.; Chevalier, R.A.

1984-01-01

The interaction of fast stellar wind with a slower wind from previous mass loss gives rise to a region of hot, shocked gas. We obtain self-similar solutions for the interaction region under the assumptions of constant mass loss rate and wind velocity for the two winds, conversion of energy in the shock region, and either isothermal electrons and adiabatic ions or isothermal electrons ad ions in the shocked region. The isothermal assumption is intended to show the effects of strog heat conduction. The solutions have no heat conduction through the shock waves and assume that the electron and ion temperatures are equilibriated in the shock waves. The one-temperature isothermal solutions have nearly constant density through the shocked region, while the two-temperature solutions are intermediate between the one-temperature adiabatic and isothermal solutions. In the two-temperature solutions, the ion temperature goes to zero at the point where the gas comoves with the shocked region and the density peaks at this point. The solution may qualitatively describe the effects of heat conduction on interaction regions in the solar wind. It will be important to determine whether the assumption of no thermal waves outside the shocked region applies to shock waves in the solar wind

Controlling inclusive cross sections in parton shower + matrix element merging

Energy Technology Data Exchange (ETDEWEB)

Plaetzer, Simon

2012-11-15

We propose an extension of matrix element plus parton shower merging at tree level to preserve inclusive cross sections obtained from the merged and showered sample. Implementing this constraint generates approximate next-to-leading order (NLO) contributions similar to the LoopSim approach. We then show how full NLO, or in principle even higher order, corrections can be added consistently, including constraints on inclusive cross sections to account for yet missing parton shower accuracy at higher logarithmic order. We also show how NLO accuracy below the merging scale can be obtained.

Controlling inclusive cross sections in parton shower + matrix element merging

International Nuclear Information System (INIS)

Plaetzer, Simon

2012-11-01

We propose an extension of matrix element plus parton shower merging at tree level to preserve inclusive cross sections obtained from the merged and showered sample. Implementing this constraint generates approximate next-to-leading order (NLO) contributions similar to the LoopSim approach. We then show how full NLO, or in principle even higher order, corrections can be added consistently, including constraints on inclusive cross sections to account for yet missing parton shower accuracy at higher logarithmic order. We also show how NLO accuracy below the merging scale can be obtained.

Spheromak Merging Experiments on SSX

Science.gov (United States)

Brown, M. R.; Kornack, T. W.; Sollins, P. K.; Luh, W. J.

1997-11-01

Spheromak merging experiments are underway at the Swarthmore Spheromak Experiment (SSX) at Swarthmore College. The spheromaks are formed by identical magnetized plasma guns and equilibrium is established in close fitting 0.5 m diameter copper flux conservers. Partial merging is achieved through openings in the back wall. We observe the formation of a reconnection boundary layer at the interface of the two spheromaks using a linear probe array. The characteristic scale of the flux reversal is about 1 cm (consistent with the diffusion scale δ_diff, the ion Larmor radius ρi and the ion inertial length c/ω_pi). Movies of the formation and evolution of the layer will be presented. Correlations between reconnection events and pulses of soft x-rays and energetic particles will be presented if available. Plans for 2D and 3D imaging of the layer will also be discussed.

An eMERGE Clinical Center at Partners Personalized Medicine

Directory of Open Access Journals (Sweden)

Jordan W. Smoller

2016-01-01

Full Text Available The integration of electronic medical records (EMRs and genomic research has become a major component of efforts to advance personalized and precision medicine. The Electronic Medical Records and Genomics (eMERGE network, initiated in 2007, is an NIH-funded consortium devoted to genomic discovery and implementation research by leveraging biorepositories linked to EMRs. In its most recent phase, eMERGE III, the network is focused on facilitating implementation of genomic medicine by detecting and disclosing rare pathogenic variants in clinically relevant genes. Partners Personalized Medicine (PPM is a center dedicated to translating personalized medicine into clinical practice within Partners HealthCare. One component of the PPM is the Partners Healthcare Biobank, a biorepository comprising broadly consented DNA samples linked to the Partners longitudinal EMR. In 2015, PPM joined the eMERGE Phase III network. Here we describe the elements of the eMERGE clinical center at PPM, including plans for genomic discovery using EMR phenotypes, evaluation of rare variant penetrance and pleiotropy, and a novel randomized trial of the impact of returning genetic results to patients and clinicians.

Structure-preservingness, internal merge, and the strict locality of triads

NARCIS (Netherlands)

Koster, J.; Karimi, S.; Samiian, V.; Wilkins, W.

2007-01-01

This paper examines Emonds’ Structure Preserving Hypothesis, and suggests that the insight behind this hypothesis survives reformulation in terms of recent minimalist theory: each structure created by internal merge can also, independently, be created by external merge. As before, this makes

Correlation order, merging and diversification

NARCIS (Netherlands)

Dhaene, J.; Denuit, M.; Vanduffel, S.

2009-01-01

We investigate the influence of the dependence between random losses on the shortfall and on the diversification benefit that arises from merging these losses. We prove that increasing the dependence between losses, expressed in terms of correlation order, has an increasing effect on the shortfall,

The Astrophysics of Merging Black Holes

Science.gov (United States)

Schnittman, Jeremy D.

2011-01-01

When two supermassive black holes (SMBHs) approach within 1-10 mpc, gravitational wave (GW) losses begin to dominate the evolution of the binary, pushing the system to merge in a relatively small time. During this final inspiral regime, the system will emit copious energy in GWs, which should be directly detectable by pulsar timing arrays and space-based interferometers. At the same time, any gas or stars in the immediate vicinity of the merging 5MBHs can get heated and produce bright electromagnetic (EM) counterparts to the GW signals. We present here a number of possible mechanisms by which simultaneous EM and GW signals will yield valuable new information about galaxy evolution, accretion disk dynamics, and fundamental physics in the most extreme gravitational fields.

Capacity of Freeway Merge Areas with Different On-Ramp Traffic Flow

Directory of Open Access Journals (Sweden)

Jinxing Shen

2015-06-01

Full Text Available This paper is aimed at investigating the influence of different types of traffic flows on the capacity of freeway merge areas. Based on the classical gap-acceptance model, two calculating models were established specifically considering randomly arriving vehicles and individual difference in driving behaviours. Monte-Carlo simulation was implemented to reproduce the maximum traffic volume on the designed freeway merge area under different situations. The results demonstrated that the proposed calculating models have better performance than the conventional gap-acceptance theory on accurately predicting the capacity of freeway merge areas. The findings of research could be helpful to improve the microscopic traffic flow simulation model from a more practical perspective and support the designing of freeway merge areas as well.

Can survival prediction be improved by merging gene expression data sets?

Directory of Open Access Journals (Sweden)

Haleh Yasrebi

Full Text Available BACKGROUND: High-throughput gene expression profiling technologies generating a wealth of data, are increasingly used for characterization of tumor biopsies for clinical trials. By applying machine learning algorithms to such clinically documented data sets, one hopes to improve tumor diagnosis, prognosis, as well as prediction of treatment response. However, the limited number of patients enrolled in a single trial study limits the power of machine learning approaches due to over-fitting. One could partially overcome this limitation by merging data from different studies. Nevertheless, such data sets differ from each other with regard to technical biases, patient selection criteria and follow-up treatment. It is therefore not clear at all whether the advantage of increased sample size outweighs the disadvantage of higher heterogeneity of merged data sets. Here, we present a systematic study to answer this question specifically for breast cancer data sets. We use survival prediction based on Cox regression as an assay to measure the added value of merged data sets. RESULTS: Using time-dependent Receiver Operating Characteristic-Area Under the Curve (ROC-AUC and hazard ratio as performance measures, we see in overall no significant improvement or deterioration of survival prediction with merged data sets as compared to individual data sets. This apparently was due to the fact that a few genes with strong prognostic power were not available on all microarray platforms and thus were not retained in the merged data sets. Surprisingly, we found that the overall best performance was achieved with a single-gene predictor consisting of CYB5D1. CONCLUSIONS: Merging did not deteriorate performance on average despite (a The diversity of microarray platforms used. (b The heterogeneity of patients cohorts. (c The heterogeneity of breast cancer disease. (d Substantial variation of time to death or relapse. (e The reduced number of genes in the merged data

NON-LINEAR MODELING OF THE RHIC INTERACTION REGIONS

International Nuclear Information System (INIS)

TOMAS, R.; FISCHER, W.; JAIN, A.; LUO, Y.; PILAT, F.

2004-01-01

For RHIC's collision lattices the dominant sources of transverse non-linearities are located in the interaction regions. The field quality is available for most of the magnets in the interaction regions from the magnetic measurements, or from extrapolations of these measurements. We discuss the implementation of these measurements in the MADX models of the Blue and the Yellow rings and their impact on beam stability

Modelling of lane-changing behaviour integrating with merging effect before a city road bottleneck

Science.gov (United States)

Lv, Wei; Song, Wei-guo; Fang, Zhi-ming; Ma, Jian

2013-10-01

Merging behaviour is a compulsive action in a discretionary lane-changing traffic system, especially in a system with a bottleneck. This paper aims to investigate the generic lane-changing behaviour considering the merging effect before a city road bottleneck. Thus firstly the merging behaviour is distinguished from other generic lane-changing behaviour. Combining discretionary lane-changing and compulsive merging, we developed an integrative traffic model, in which a method to calculate the lane-changing probability and the merging probability was proposed. A simulation scenario derived from real life was conducted to validate the proposed programming algorithm. Finally, a discussion on the simulation findings shows that the merging influence can be expanded and the merging behaviour can increase the probability of local traffic jamming in its affected area of the adjacent lane. The distribution of the merging distance provides fundamental insights for actual traffic management. The result of the clearance time implies the position of the incident point has a significant effect on the clearing time and it is important to ensure the end (exit) of the road is unimpeded in traffic evacuation.

The FCC-ee Interaction Region Magnet Design

CERN Document Server

Koratzinos, Michael; Blondel, Alain; Bogomyagkov, Anton; Holzer, Bernhard; Oide, Katsunobu; Sinyatkin, Sergey; Zimmermann, Frank; van Nugteren, Jeroen

2016-01-01

The design of the region close to the interaction point of the FCC-ee experiments is especially challenging. The beams collide at an angle (+-15 mrad) in the high-field region of the detector solenoid. Moreover, the very low vertical beta_y* of the machine necessitates that the final focusing quadrupoles have a distance from the IP (L*) of around 2 m and therefore are inside the main detector solenoid. The beams should be screened from the effect of the detector magnetic field, and the emittance blow-up due to vertical dispersion in the interaction region should be minimized, while leaving enough space for detector components. Crosstalk between the two final focus quadrupoles, only about 6 cm apart at the tip, should also be minimized.

Optimization approaches to mpi and area merging-based parallel buffer algorithm

Directory of Open Access Journals (Sweden)

Junfu Fan

Full Text Available On buffer zone construction, the rasterization-based dilation method inevitably introduces errors, and the double-sided parallel line method involves a series of complex operations. In this paper, we proposed a parallel buffer algorithm based on area merging and MPI (Message Passing Interface to improve the performances of buffer analyses on processing large datasets. Experimental results reveal that there are three major performance bottlenecks which significantly impact the serial and parallel buffer construction efficiencies, including the area merging strategy, the task load balance method and the MPI inter-process results merging strategy. Corresponding optimization approaches involving tree-like area merging strategy, the vertex number oriented parallel task partition method and the inter-process results merging strategy were suggested to overcome these bottlenecks. Experiments were carried out to examine the performance efficiency of the optimized parallel algorithm. The estimation results suggested that the optimization approaches could provide high performance and processing ability for buffer construction in a cluster parallel environment. Our method could provide insights into the parallelization of spatial analysis algorithm.

Learning to merge search results for efficient Distributed Information Retrieval

NARCIS (Netherlands)

Tjin-Kam-Jet, Kien; Hiemstra, Djoerd

2010-01-01

Merging search results from different servers is a major problem in Distributed Information Retrieval. We used Regression-SVM and Ranking-SVM which would learn a function that merges results based on information that is readily available: i.e. the ranks, titles, summaries and URLs contained in the

Merging Mixture Components for Cell Population Identification in Flow Cytometry

Directory of Open Access Journals (Sweden)

Greg Finak

2009-01-01

Full Text Available We present a framework for the identification of cell subpopulations in flow cytometry data based on merging mixture components using the flowClust methodology. We show that the cluster merging algorithm under our framework improves model fit and provides a better estimate of the number of distinct cell subpopulations than either Gaussian mixture models or flowClust, especially for complicated flow cytometry data distributions. Our framework allows the automated selection of the number of distinct cell subpopulations and we are able to identify cases where the algorithm fails, thus making it suitable for application in a high throughput FCM analysis pipeline. Furthermore, we demonstrate a method for summarizing complex merged cell subpopulations in a simple manner that integrates with the existing flowClust framework and enables downstream data analysis. We demonstrate the performance of our framework on simulated and real FCM data. The software is available in the flowMerge package through the Bioconductor project.

Simulations of Bunch Merging in a Beta Beam Decay Ring

CERN Document Server

Heinrich, Daniel Christopher; Chance, Antoine

2011-01-01

To further study neutrino oscillation properties a Beta Beam facility has been proposed. Beta decaying ions with high kinetic energy are stored in a storage ring ("Decay Ring") with straight sections to create pure focused (anti) electron neutrino beams. However to reach high sensitivity to neutrino oscillation parameters in the experiment the bunched beam intensity and duty cycle in the DR have to be optimized. The first CERN-based scenario, using 6He and 18Ne as neutrino sources, has been studied using a bunch merging RF scheme. Two RF cavities at different frequencies are used to capture newly injected bunches and then merge them into the stored bunches. It was shown that this scheme could satisfy the requirements on intensity and duty cycle set by the experiment. This merging scheme has now been revised with new simulation software providing new results for 6He and 18Ne. Furthermore bunch merging has been studied for the second CERN-based scenario using 8Li and 8B.

Evolution and interaction of large interplanetary streams

International Nuclear Information System (INIS)

Whang, Y.C.; Burlaga, L.F.

1985-02-01

A computer simulation for the evolution and interaction of large interplanetary streams based on multi-spacecraft observations and an unsteady, one-dimensional MHD model is presented. Two events, each observed by two or more spacecraft separated by a distance of the order of 10 AU, were studied. The first simulation is based on the plasma and magnetic field observations made by two radially-aligned spacecraft. The second simulation is based on an event observed first by Helios-1 in May 1980 near 0.6 AU and later by Voyager-1 in June 1980 at 8.1 AU. These examples show that the dynamical evolution of large-scale solar wind structures is dominated by the shock process, including the formation, collision, and merging of shocks. The interaction of shocks with stream structures also causes a drastic decrease in the amplitude of the solar wind speed variation with increasing heliocentric distance, and as a result of interactions there is a large variation of shock-strengths and shock-speeds. The simulation results shed light on the interpretation for the interaction and evolution of large interplanetary streams. Observations were made along a few limited trajectories, but simulation results can supplement these by providing the detailed evolution process for large-scale solar wind structures in the vast region not directly observed. The use of a quantitative nonlinear simulation model including shock merging process is crucial in the interpretation of data obtained in the outer heliosphere

Comparative study of the electron density profiles in the compact torus plasma merging experiments

International Nuclear Information System (INIS)

Hayashiya, Hitoshi; Asaka, Takeo; Katsurai, Makoto

2003-01-01

Following two previous papers on the comparative studies of the electron density distributions for a single compact torus (CT) and a spherical tokamak (ST), and for the a single ST and a merged ST, a comparative study on the dynamics of the electron density profile and after the CT and ST plasma merging process was performed. The sharpness of the peak in the electron density profile around the mid-plane just after the merging of CT with a low safety factor (q value) such as RFP or spheromak is found to be related to the speed of the magnetic axis during the plasma merging process. It is also found that the electron density gradient near the plasma edge in a high q ST is larger than that of a low q CT. High q ST is found to be provided with the magnetic structure which is able to sustain a large thermal pressure by a strong j x B force. Despite these differences in the electron density profile between CT and ST during merging, the confinement characteristics evaluated from the number of electrons confined within the magnetic separatrix after the completion of the merging is almost similar between in the merging CT and in the merging ST. For all configurations, the electron density profiles after the completion of the merging are analogous to those of the corresponding single configuration produced without the merging process. (author)

Merging Digital Surface Models Implementing Bayesian Approaches

Science.gov (United States)

Sadeq, H.; Drummond, J.; Li, Z.

2016-06-01

In this research different DSMs from different sources have been merged. The merging is based on a probabilistic model using a Bayesian Approach. The implemented data have been sourced from very high resolution satellite imagery sensors (e.g. WorldView-1 and Pleiades). It is deemed preferable to use a Bayesian Approach when the data obtained from the sensors are limited and it is difficult to obtain many measurements or it would be very costly, thus the problem of the lack of data can be solved by introducing a priori estimations of data. To infer the prior data, it is assumed that the roofs of the buildings are specified as smooth, and for that purpose local entropy has been implemented. In addition to the a priori estimations, GNSS RTK measurements have been collected in the field which are used as check points to assess the quality of the DSMs and to validate the merging result. The model has been applied in the West-End of Glasgow containing different kinds of buildings, such as flat roofed and hipped roofed buildings. Both quantitative and qualitative methods have been employed to validate the merged DSM. The validation results have shown that the model was successfully able to improve the quality of the DSMs and improving some characteristics such as the roof surfaces, which consequently led to better representations. In addition to that, the developed model has been compared with the well established Maximum Likelihood model and showed similar quantitative statistical results and better qualitative results. Although the proposed model has been applied on DSMs that were derived from satellite imagery, it can be applied to any other sourced DSMs.

MERGING DIGITAL SURFACE MODELS IMPLEMENTING BAYESIAN APPROACHES

Directory of Open Access Journals (Sweden)

H. Sadeq

2016-06-01

Full Text Available In this research different DSMs from different sources have been merged. The merging is based on a probabilistic model using a Bayesian Approach. The implemented data have been sourced from very high resolution satellite imagery sensors (e.g. WorldView-1 and Pleiades. It is deemed preferable to use a Bayesian Approach when the data obtained from the sensors are limited and it is difficult to obtain many measurements or it would be very costly, thus the problem of the lack of data can be solved by introducing a priori estimations of data. To infer the prior data, it is assumed that the roofs of the buildings are specified as smooth, and for that purpose local entropy has been implemented. In addition to the a priori estimations, GNSS RTK measurements have been collected in the field which are used as check points to assess the quality of the DSMs and to validate the merging result. The model has been applied in the West-End of Glasgow containing different kinds of buildings, such as flat roofed and hipped roofed buildings. Both quantitative and qualitative methods have been employed to validate the merged DSM. The validation results have shown that the model was successfully able to improve the quality of the DSMs and improving some characteristics such as the roof surfaces, which consequently led to better representations. In addition to that, the developed model has been compared with the well established Maximum Likelihood model and showed similar quantitative statistical results and better qualitative results. Although the proposed model has been applied on DSMs that were derived from satellite imagery, it can be applied to any other sourced DSMs.

Scaled beam merging experiment for heavy ion inertial fusion

Directory of Open Access Journals (Sweden)

P. A. Seidl

2003-09-01

Full Text Available Transverse beam combining is a cost-saving option employed in many designs for heavy ion fusion drivers. However, the resultant transverse phase space dilution must be minimized so as not to sacrifice focusability at the target. A prototype combining experiment has been completed employing four 3-mA Cs^{+} beams injected at 160 keV. The focusing elements upstream of the merge consist of four quadrupoles and a final combined-function element (quadrupole and dipole. Following the merge, the resultant single beam is transported in a single alternating gradient channel where the subsequent evolution of the distribution function is diagnosed. The results are in fair agreement with particle-in-cell simulations. They indicate that for some heavy ion fusion driver designs, the phase space dilution from merging is acceptable.

Merging H/W/Z + 0 and 1 jet at NLO with no merging scale: a path to parton shower + NNLO matching

CERN Document Server

Hamilton, Keith; Oleari, Carlo; Zanderighi, Giulia

2013-01-01

We consider the POWHEG generator for a H/W/Z boson plus one jet, augmented with the recently proposed MiNLO method for the choice of scales and the inclusion of Sudakov form factors. Within this framework, the generator covers all the transverse-momentum region of the H/W/Z boson, i.e. no generation cuts are needed to obtain a finite result. By construction, the generator achieves NLO accuracy for distributions involving a finite (and relatively large) transverse momentum of the boson. We examine the conditions under which also the totally inclusive distributions (e.g. the boson rapidity distribution) achieve NLO accuracy. We find that a minimal modification of the MiNLO prescription is sufficient to achieve such accuracy. We thus construct a NLO generator for H/W/Z boson plus one jet production such that it smoothly merges into a NLO single boson production in the small transverse-momentum region. We notice that, by simply reweighting the boson rapidity distribution to NNLO predictions, we achieve a NNLO acc...

A Split-and-Merge-Based Uterine Fibroid Ultrasound Image Segmentation Method in HIFU Therapy.

Directory of Open Access Journals (Sweden)

Menglong Xu

Full Text Available High-intensity focused ultrasound (HIFU therapy has been used to treat uterine fibroids widely and successfully. Uterine fibroid segmentation plays an important role in positioning the target region for HIFU therapy. Presently, it is completed by physicians manually, reducing the efficiency of therapy. Thus, computer-aided segmentation of uterine fibroids benefits the improvement of therapy efficiency. Recently, most computer-aided ultrasound segmentation methods have been based on the framework of contour evolution, such as snakes and level sets. These methods can achieve good performance, although they need an initial contour that influences segmentation results. It is difficult to obtain the initial contour automatically; thus, the initial contour is always obtained manually in many segmentation methods. A split-and-merge-based uterine fibroid segmentation method, which needs no initial contour to ensure less manual intervention, is proposed in this paper. The method first splits the image into many small homogeneous regions called superpixels. A new feature representation method based on texture histogram is employed to characterize each superpixel. Next, the superpixels are merged according to their similarities, which are measured by integrating their Quadratic-Chi texture histogram distances with their space adjacency. Multi-way Ncut is used as the merging criterion, and an adaptive scheme is incorporated to decrease manual intervention further. The method is implemented using Matlab on a personal computer (PC platform with Intel Pentium Dual-Core CPU E5700. The method is validated on forty-two ultrasound images acquired from HIFU therapy. The average running time is 9.54 s. Statistical results showed that SI reaches a value as high as 87.58%, and normHD is 5.18% on average. It has been demonstrated that the proposed method is appropriate for segmentation of uterine fibroids in HIFU pre-treatment imaging and planning.

Network Interactions in the Great Altai Region

Directory of Open Access Journals (Sweden)

Lev Aleksandrovich Korshunov

2017-12-01

Full Text Available To improve the efficiency and competitiveness of the regional economy, an effective interaction between educational institutions in the Great Altai region is needed. The innovation growth can enhancing this interaction. The article explores the state of network structures in the economy and higher education in the border territories of the countries of Great Altai. The authors propose an updated approach to the three-level classification of network interaction. We analyze growing influence of the countries with emerging economies. We define the factors that impede the more stable and multifaceted regional development of these countries. Further, the authors determine indicators of the higher education systems and cooperation systems at the university level between the Shanghai Cooperation Organization countries (SCO and BRICS countries, showing the international rankings of the universities in these countries. The teaching language is important to overcome the obstacles in the interregional cooperation. The authors specify the problems of the development of the universities of the SCO and BRICS countries as global educational networks. The research applies basic scientific logical methods of analysis and synthesis, induction and deduction, as well as the SWOT analysis method. We have indentified and analyzed the existing economic and educational relations. To promote the economic innovation development of the border territories of the Great Altai, we propose a model of regional network university. Modern universities function in a new economic environment. Thus, in a great extent, they form the technological and social aspects of this environment. Innovative network structures contribute to the formation of a new network institutional environment of the regional economy, which impacts the macro- and microeconomic performance of the region as a whole. The results of the research can help to optimize the regional economies of the border

Gasdynamics and star formation in interacting and merging galaxies

International Nuclear Information System (INIS)

Olson, K.M.; Kwan, J.

1990-01-01

The effects of various parameters on the interaction of two galaxies and on the gas cloud collisions which are induced to occur are considered by examining several simulations of an interaction with different impact parameters, similar to the simulations described by Olson and Kwan (1990). The results of the present calculations are consistent with those obtained earlier by Olson and Kwan. They show that the interaction of two galaxies can lead to an increase in the rate at which gas clouds collide, and that these collisions are of sufficient kinetic energy to disrupt the clouds and prevent the buildup of a large number of massive clouds. It was found that, as the inclination of the interaction is increased, the perturbation of the cloud system is decreased. It was also found that unbound orbits produce a smaller perturbation than bound orbits, and that decreasing the mass of the perturbing galaxy decreases the perturbation. 21 refs

TIDAL INTERACTIONS IN MERGING WHITE DWARF BINARIES

International Nuclear Information System (INIS)

Piro, Anthony L.

2011-01-01

The recently discovered system J0651 is the tightest known detached white dwarf (WD) binary. Since it has not yet initiated Roche-lobe overflow, it provides a relatively clean environment for testing our understanding of tidal interactions. I investigate the tidal heating of each WD, parameterized in terms of its tidal Q parameter. Assuming that the heating can be radiated efficiently, the current luminosities are consistent with Q 1 ∼ 7 x 10 10 and Q 2 ∼ 2 x 10 7 , for the He and C/O WDs, respectively. Conversely, if the observed luminosities are merely from the cooling of the WDs, these estimated values of Q represent the upper limits. A large Q 1 for the He WD means its spin velocity will be slower than that expected if it was tidally locked, which, since the binary is eclipsing, may be measurable via the Rossiter-McLaughlin effect. After one year, gravitational wave emission shifts the time of eclipses by 5.5 s, but tidal interactions cause the orbit to shrink more rapidly, changing the time by up to an additional 0.3 s after a year. Future eclipse timing measurements may therefore infer the degree of tidal locking.

Geographically weighted regression based methods for merging satellite and gauge precipitation

Science.gov (United States)

Chao, Lijun; Zhang, Ke; Li, Zhijia; Zhu, Yuelong; Wang, Jingfeng; Yu, Zhongbo

2018-03-01

Real-time precipitation data with high spatiotemporal resolutions are crucial for accurate hydrological forecasting. To improve the spatial resolution and quality of satellite precipitation, a three-step satellite and gauge precipitation merging method was formulated in this study: (1) bilinear interpolation is first applied to downscale coarser satellite precipitation to a finer resolution (PS); (2) the (mixed) geographically weighted regression methods coupled with a weighting function are then used to estimate biases of PS as functions of gauge observations (PO) and PS; and (3) biases of PS are finally corrected to produce a merged precipitation product. Based on the above framework, eight algorithms, a combination of two geographically weighted regression methods and four weighting functions, are developed to merge CMORPH (CPC MORPHing technique) precipitation with station observations on a daily scale in the Ziwuhe Basin of China. The geographical variables (elevation, slope, aspect, surface roughness, and distance to the coastline) and a meteorological variable (wind speed) were used for merging precipitation to avoid the artificial spatial autocorrelation resulting from traditional interpolation methods. The results show that the combination of the MGWR and BI-square function (MGWR-BI) has the best performance (R = 0.863 and RMSE = 7.273 mm/day) among the eight algorithms. The MGWR-BI algorithm was then applied to produce hourly merged precipitation product. Compared to the original CMORPH product (R = 0.208 and RMSE = 1.208 mm/hr), the quality of the merged data is significantly higher (R = 0.724 and RMSE = 0.706 mm/hr). The developed merging method not only improves the spatial resolution and quality of the satellite product but also is easy to implement, which is valuable for hydrological modeling and other applications.

Temporal-spatial structure of magnetic merging at the magnetopause inferred from 557.7-nm all-sky images

Directory of Open Access Journals (Sweden)

N. C. Maynard

2004-09-01

Full Text Available We demonstrate that high-resolution 557.7-nm all-sky images are useful tools for investigating the spatial and temporal evolution of merging on the dayside magnetopause. Analysis of ground and satellite measurements leads us to conclude that high-latitude merging events can occur at multiple sites simultaneously and vary asynchronously on time scales of 30s to 3min. Variations of 557.7nm emissions were observed at a 10s cadence at Ny-Ålesund on 19 December 2001, while significant changes in the IMF clock angle were reaching the magnetopause. The optical patterns are consistent with a scenario in which merging occurs around the rim of the high-latitude cusp at positions dictated by the IMF clock angle. Electrons energized at merging sites represent plausible sources for 557.7nm emissions in the cusp. Polar observations at the magnetopause have directly linked enhanced fluxes of ≥0.5keV electrons with merging. Spectra of electrons responsible for some of the emissions, measured during a DMSP F15 overflight, exhibit "inverted-V" features, indicating further acceleration above the ionosphere. SuperDARN spectral width boundaries, characteristic of open-closed field line transitions, are located at the equatorward edge of the 557.7nm emissions. Optical data suggest that with IMF BY>0, the Northern Hemisphere cusp divides into three source regions. When the IMF clock angle was ~150° structured 557.7-nm emissions came from east of the 13:00 MLT meridian. At larger clock angles the emissions appeared between 12:00 and 13:00 MLT. No significant 557.7-nm emissions were detected in the prenoon MLT sector. MHD simulations corroborate our scenario, showing that with the observed large dipole-tilt and IMF clock angles, merging sites develop near the front and eastern portions of the high-altitude cusp rim in the Northern Hemisphere and near the western part of the cusp rim in the Southern Hemisphere.

Sea-ice, clouds and atmospheric conditions in the arctic and their interactions as derived from a merged C3M data product

Science.gov (United States)

Nag, Bappaditya

The polar regions of the world constitute an important sector in the global energy balance. Among other effects responsible for the change in the sea-ice cover like ocean circulation and ice-albedo feedback, the cloud-radiation feedback also plays a vital role in modulation of the Arctic environment. However the annual cycle of the clouds is very poorly represented in current global circulation models. This study aimed to explore the atmospheric conditions in the Arctic on an unprecedented spatial coverage spanning 70°N to 80°N through the use of a merged data product, C3MData (derived from NASA's A-Train Series). The following three topics provide outline on how this dataset can be used to accomplish a detailed analysis of the Arctic environment and provide the modelling community with first information to update their models aimed at better forecasts. (1)The three properties of the Arctic climate system to be studied using the C3MData are sea-ice, clouds, and the atmospheric conditions. The first topic is to document the present states of the three properties and also their time evolutions or their seasonal cycles. (2)The second topic is aimed at the interactions or the feedbacks processes among the three properties. For example, the immediate alteration in the fluxes and the feedbacks arising from the change in the sea-ice cover is investigated. Seasonal and regional variations are also studied. (3)The third topics is aimed at the processes in native spatial resolution that drive or accompany with sea ice melting and sea ice growth. Using a composite approach based on a classification due to surface type, it is found that limitation of the water vapour influx from the surface due to change in phase at the surface featuring open oceans or marginal sea-ice cover to complete sea-ice cover is a major determinant in the modulation of the atmospheric moisture. The impact of the cloud-radiative effects in the Arctic is found to vary with sea-ice cover and seasonally

Modeling merging behavior at lane drops.

Science.gov (United States)

2015-02-01

In work-zone configurations where lane drops are present, merging of traffic at the taper presents an operational concern. In : addition, as flow through the work zone is reduced, the relative traffic safety of the work zone is also reduced. Improvin...

Fused cerebral organoids model interactions between brain regions.

Science.gov (United States)

Bagley, Joshua A; Reumann, Daniel; Bian, Shan; Lévi-Strauss, Julie; Knoblich, Juergen A

2017-07-01

Human brain development involves complex interactions between different regions, including long-distance neuronal migration or formation of major axonal tracts. Different brain regions can be cultured in vitro within 3D cerebral organoids, but the random arrangement of regional identities limits the reliable analysis of complex phenotypes. Here, we describe a coculture method combining brain regions of choice within one organoid tissue. By fusing organoids of dorsal and ventral forebrain identities, we generate a dorsal-ventral axis. Using fluorescent reporters, we demonstrate CXCR4-dependent GABAergic interneuron migration from ventral to dorsal forebrain and describe methodology for time-lapse imaging of human interneuron migration. Our results demonstrate that cerebral organoid fusion cultures can model complex interactions between different brain regions. Combined with reprogramming technology, fusions should offer researchers the possibility to analyze complex neurodevelopmental defects using cells from neurological disease patients and to test potential therapeutic compounds.

Studies on Plasmoid Merging using Compact Toroid Injectors

Science.gov (United States)

Allfrey, Ian; Matsumoto, Tadafumi; Roche, Thomas; Gota, Hiroshi; Edo, Takahiro; Asai, Tomohiko; Sheftman, Daniel; Osin Team; Dima Team

2017-10-01

C-2 and C-2U experiments have used magnetized coaxial plasma guns (MCPG) to inject compact toroids (CTs) for refueling the long-lived advanced beam-driven field-reversed configuration (FRC) plasma. This refueling method will also be used for the C-2W experiment. To minimize momentum transfer from the CT to the FRC two CTs are injected radially, diametrically opposed and coincident in time. To improve understanding of the CT characteristics TAE has a dedicated test bed for the development of CT injectors (CTI), where plasmoid merging experiments are performed. The test bed has two CTIs on axis with both axial and transverse magnetic fields. The 1 kG magnetic fields, intended to approximate the magnetic field strength and injection angle on C-2W, allow studies of cross-field transport and merging. Both CTIs are capable of injecting multiple CTs at up to 1 kHz. The resulting merged CT lives >100 μs with a radius of 25 cm. More detailed results of CT parameters will be presented.

Comparison of online and offline based merging methods for high resolution rainfall intensities

Science.gov (United States)

Shehu, Bora; Haberlandt, Uwe

2016-04-01

Accurate rainfall intensities with high spatial and temporal resolution are crucial for urban flow prediction. Commonly, raw or bias corrected radar fields are used for forecasting, while different merging products are employed for simulation. The merging products are proven to be adequate for rainfall intensities estimation, however their application in forecasting is limited as they are developed for offline mode. This study aims at adapting and refining the offline merging techniques for the online implementation, and at comparing the performance of these methods for high resolution rainfall data. Radar bias correction based on mean fields and quantile mapping are analyzed individually and also are implemented in conditional merging. Special attention is given to the impact of different spatial and temporal filters on the predictive skill of all methods. Raw radar data and kriging interpolation of station data are considered as a reference to check the benefit of the merged products. The methods are applied for several extreme events in the time period 2006-2012 caused by different meteorological conditions, and their performance is evaluated by split sampling. The study area is located within the 112 km radius of Hannover radar in Lower Saxony, Germany and the data set constitutes of 80 recording stations in 5 min time steps. The results of this study reveal how the performance of the methods is affected by the adjustment of radar data, choice of merging method and selected event. Merging techniques can be used to improve the performance of online rainfall estimation, which gives way to the application of merging products in forecasting.

Total ozone trends from 1979 to 2016 derived from five merged observational datasets - the emergence into ozone recovery

Science.gov (United States)

Weber, Mark; Coldewey-Egbers, Melanie; Fioletov, Vitali E.; Frith, Stacey M.; Wild, Jeannette D.; Burrows, John P.; Long, Craig S.; Loyola, Diego

2018-02-01

We report on updated trends using different merged datasets from satellite and ground-based observations for the period from 1979 to 2016. Trends were determined by applying a multiple linear regression (MLR) to annual mean zonal mean data. Merged datasets used here include NASA MOD v8.6 and National Oceanic and Atmospheric Administration (NOAA) merge v8.6, both based on data from the series of Solar Backscatter UltraViolet (SBUV) and SBUV-2 satellite instruments (1978-present) as well as the Global Ozone Monitoring Experiment (GOME)-type Total Ozone (GTO) and GOME-SCIAMACHY-GOME-2 (GSG) merged datasets (1995-present), mainly comprising satellite data from GOME, the Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY), and GOME-2A. The fifth dataset consists of the monthly mean zonal mean data from ground-based measurements collected at World Ozone and UV Data Center (WOUDC). The addition of four more years of data since the last World Meteorological Organization (WMO) ozone assessment (2013-2016) shows that for most datasets and regions the trends since the stratospheric halogen reached its maximum (˜ 1996 globally and ˜ 2000 in polar regions) are mostly not significantly different from zero. However, for some latitudes, in particular the Southern Hemisphere extratropics and Northern Hemisphere subtropics, several datasets show small positive trends of slightly below +1 % decade-1 that are barely statistically significant at the 2σ uncertainty level. In the tropics, only two datasets show significant trends of +0.5 to +0.8 % decade-1, while the others show near-zero trends. Positive trends since 2000 have been observed over Antarctica in September, but near-zero trends are found in October as well as in March over the Arctic. Uncertainties due to possible drifts between the datasets, from the merging procedure used to combine satellite datasets and related to the low sampling of ground-based data, are not accounted for in the trend

Computing and visualizing time-varying merge trees for high-dimensional data

Energy Technology Data Exchange (ETDEWEB)

Oesterling, Patrick [Univ. of Leipzig (Germany); Heine, Christian [Univ. of Kaiserslautern (Germany); Weber, Gunther H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morozov, Dmitry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Scheuermann, Gerik [Univ. of Leipzig (Germany)

2017-06-03

We introduce a new method that identifies and tracks features in arbitrary dimensions using the merge tree -- a structure for identifying topological features based on thresholding in scalar fields. This method analyzes the evolution of features of the function by tracking changes in the merge tree and relates features by matching subtrees between consecutive time steps. Using the time-varying merge tree, we present a structural visualization of the changing function that illustrates both features and their temporal evolution. We demonstrate the utility of our approach by applying it to temporal cluster analysis of high-dimensional point clouds.

Program Merges SAR Data on Terrain and Vegetation Heights

Science.gov (United States)

Siqueira, Paul; Hensley, Scott; Rodriguez, Ernesto; Simard, Marc

2007-01-01

X/P Merge is a computer program that estimates ground-surface elevations and vegetation heights from multiple sets of data acquired by the GeoSAR instrument [a terrain-mapping synthetic-aperture radar (SAR) system that operates in the X and bands]. X/P Merge software combines data from X- and P-band digital elevation models, SAR backscatter magnitudes, and interferometric correlation magnitudes into a simplified set of output topographical maps of ground-surface elevation and tree height.

Sparse Reconstruction of the Merging A520 Cluster System

Energy Technology Data Exchange (ETDEWEB)

Peel, Austin [Département d’Astrophysique, IRFU, CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette (France); Lanusse, François [McWilliams Center for Cosmology, Department of Physics, Carnegie Mellon University, Pittsburgh, PA 15213 (United States); Starck, Jean-Luc, E-mail: austin.peel@cea.fr [Université Paris Diderot, AIM, Sorbonne Paris Cité, CEA, CNRS, F-91191 Gif-sur-Yvette (France)

2017-09-20

Merging galaxy clusters present a unique opportunity to study the properties of dark matter in an astrophysical context. These are rare and extreme cosmic events in which the bulk of the baryonic matter becomes displaced from the dark matter halos of the colliding subclusters. Since all mass bends light, weak gravitational lensing is a primary tool to study the total mass distribution in such systems. Combined with X-ray and optical analyses, mass maps of cluster mergers reconstructed from weak-lensing observations have been used to constrain the self-interaction cross-section of dark matter. The dynamically complex Abell 520 (A520) cluster is an exceptional case, even among merging systems: multi-wavelength observations have revealed a surprising high mass-to-light concentration of dark mass, the interpretation of which is difficult under the standard assumption of effectively collisionless dark matter. We revisit A520 using a new sparsity-based mass-mapping algorithm to independently assess the presence of the puzzling dark core. We obtain high-resolution mass reconstructions from two separate galaxy shape catalogs derived from Hubble Space Telescope observations of the system. Our mass maps agree well overall with the results of previous studies, but we find important differences. In particular, although we are able to identify the dark core at a certain level in both data sets, it is at much lower significance than has been reported before using the same data. As we cannot confirm the detection in our analysis, we do not consider A520 as posing a significant challenge to the collisionless dark matter scenario.

Simulations of Merging Helion Bunches on the AGS Injection Porch

Energy Technology Data Exchange (ETDEWEB)

Gardner, C. J. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

2014-08-29

During the setup of helions for the FY2014 RHIC run it was discovered that the standard scheme for merging bunches on the AGS injection porch required an injection kicker pulse shorter than what was available. To overcome this difficulty, K. Zeno proposed and developed an interesting and unusual alternative which uses RF harmonic numbers 12, 4, 2 (rather than the standard 8, 4, 2) to merge 8 helion bunches into 2. In this note we carry out simulations that illustrate how the alternative scheme works and how it compares with the standard scheme. This is done in Sections 13 and 14. A scheme in which 6 bunches are merged into 1 is simulated in Section 15. This may be useful if more helions per merged bunch are needed in future runs. General formulae for the simulations are given in Sections 9 through 12. For completeness, Sections 1 through 8 give a derivation of the turn-by-turn equations of longitudinal motion at constant magnetic field. The derivation is based on the work of MacLachlan. The reader may wish to skip over these Sections and start with Section 9.

Simulations of Merging Helion Bunches on the AGS Injection Porch

International Nuclear Information System (INIS)

Gardner, C. J.

2014-01-01

During the setup of helions for the FY2014 RHIC run it was discovered that the standard scheme for merging bunches on the AGS injection porch required an injection kicker pulse shorter than what was available. To overcome this difficulty, K. Zeno proposed and developed an interesting and unusual alternative which uses RF harmonic numbers 12, 4, 2 (rather than the standard 8, 4, 2) to merge 8 helion bunches into 2. In this note we carry out simulations that illustrate how the alternative scheme works and how it compares with the standard scheme. This is done in Sections 13 and 14. A scheme in which 6 bunches are merged into 1 is simulated in Section 15. This may be useful if more helions per merged bunch are needed in future runs. General formulae for the simulations are given in Sections 9 through 12. For completeness, Sections 1 through 8 give a derivation of the turn-by-turn equations of longitudinal motion at constant magnetic field. The derivation is based on the work of MacLachlan. The reader may wish to skip over these Sections and start with Section 9.

MERGE-ETL: An Optimisation Equilibrium Model with Two Different Endogeneous Technological Learning Formulations

Energy Technology Data Exchange (ETDEWEB)

Bahn, O.; Kypreos, S.

2002-07-01

In MERGE-ETL, endogenous technological progress is applied to eight energy technologies: six power plants (integrated coal gasification with combined cycle, gas turbine with combined cycle, gas fuel cell, new nuclear designs, wind turbine and solar photovoltaic) and two plants producing hydrogen (from biomass and solar photovoltaic). Furthermore, compared to the original MERGE model, we have introduced two new power plants (using coal and gas) with CO{sub 2} capture and disposal into depleted oil and gas reservoirs. The difficulty with incorporating endogenous technological progress in MERGE comes from the resulting formulation of the MERGE-ETL model. Indeed, technological learning is related to increasing returns to adoption, and the mathematical formulation of MERGE-ETL corresponds then to a (non-linear and) non-convex optimisation problem. To solve MERGE-ETL, we have devised a three-step heuristic approach, where we search for the global optimum in an iterative way. We use in particular for this a linearisation, following mixed integer programming techniques, of the bottom-up part of MERGE-ETL. To study the impacts of modelling endogenous technological change in MERGE, we have considered several scenarios related to technological learning and carbon control. The latter corresponds to a 'soft landing' of world energy related CO{sub 2} emissions to a level of 10 Gt C by 2050, and takes into account the recent (2001) Marrakech Agreements for CO{sub 2} emission limits by 2010. Notice that our baseline scenario (without emission control and endogenous technological change) is consistent, in particular in terms of population and CO{sub 2} emissions, with the IPCC B2 scenario. Our numerical application with MERGE-ETL shows that technological learning yields an increase of primary energy use and of electricity generation. Indeed, energy production, and in particular electricity generation, become less expensive over-time. Energy (electricity, but also non

Droplets formation and merging in two-phase flow microfluidics.

Science.gov (United States)

Gu, Hao; Duits, Michel H G; Mugele, Frieder

2011-01-01

Two-phase flow microfluidics is emerging as a popular technology for a wide range of applications involving high throughput such as encapsulation, chemical synthesis and biochemical assays. Within this platform, the formation and merging of droplets inside an immiscible carrier fluid are two key procedures: (i) the emulsification step should lead to a very well controlled drop size (distribution); and (ii) the use of droplet as micro-reactors requires a reliable merging. A novel trend within this field is the use of additional active means of control besides the commonly used hydrodynamic manipulation. Electric fields are especially suitable for this, due to quantitative control over the amplitude and time dependence of the signals, and the flexibility in designing micro-electrode geometries. With this, the formation and merging of droplets can be achieved on-demand and with high precision. In this review on two-phase flow microfluidics, particular emphasis is given on these aspects. Also recent innovations in microfabrication technologies used for this purpose will be discussed.

The collaborative effect of ram pressure and merging on star formation and stripping fraction

Science.gov (United States)

Bischko, J. C.; Steinhauser, D.; Schindler, S.

2015-04-01

Aims: We investigate the effect of ram pressure stripping (RPS) on several simulations of merging pairs of gas-rich spiral galaxies. We are concerned with the changes in stripping efficiency and the time evolution of the star formation rate. Our goal is to provide an estimate of the combined effect of merging and RPS compared to the influence of the individual processes. Methods: We make use of the combined N-body/hydrodynamic code GADGET-2. The code features a threshold-based statistical recipe for star formation, as well as radiative cooling and modeling of galactic winds. In our simulations, we vary mass ratios between 1:4 and 1:8 in a binary merger. We sample different geometric configurations of the merging systems (edge-on and face-on mergers, different impact parameters). Furthermore, we vary the properties of the intracluster medium (ICM) in rough steps: the speed of the merging system relative to the ICM between 500 and 1000 km s-1, the ICM density between 10-29 and 10-27 g cm-3, and the ICM direction relative to the mergers' orbital plane. Ram pressure is kept constant within a simulation time period, as is the ICM temperature of 107 K. Each simulation in the ICM is compared to simulations of the merger in vacuum and the non-merging galaxies with acting ram pressure. Results: Averaged over the simulation time (1 Gyr) the merging pairs show a negligible 5% enhancement in SFR, when compared to single galaxies under the same environmental conditions. The SFRs peak at the time of the galaxies first fly-through. There, our simulations show SFRs of up to 20 M⊙ yr-1 (compared to 3 M⊙ yr-1 of the non-merging galaxies in vacuum). In the most extreme case, this constitutes a short-term (<50 Myr) SFR increase of 50 % over the non-merging galaxies experiencing ram pressure. The wake of merging galaxies in the ICM typically has a third to half the star mass seen in the non-merging galaxies and 5% to 10% less gas mass. The joint effect of RPS and merging, according

PEAR: a fast and accurate Illumina Paired-End reAd mergeR.

Science.gov (United States)

Zhang, Jiajie; Kobert, Kassian; Flouri, Tomáš; Stamatakis, Alexandros

2014-03-01

The Illumina paired-end sequencing technology can generate reads from both ends of target DNA fragments, which can subsequently be merged to increase the overall read length. There already exist tools for merging these paired-end reads when the target fragments are equally long. However, when fragment lengths vary and, in particular, when either the fragment size is shorter than a single-end read, or longer than twice the size of a single-end read, most state-of-the-art mergers fail to generate reliable results. Therefore, a robust tool is needed to merge paired-end reads that exhibit varying overlap lengths because of varying target fragment lengths. We present the PEAR software for merging raw Illumina paired-end reads from target fragments of varying length. The program evaluates all possible paired-end read overlaps and does not require the target fragment size as input. It also implements a statistical test for minimizing false-positive results. Tests on simulated and empirical data show that PEAR consistently generates highly accurate merged paired-end reads. A highly optimized implementation allows for merging millions of paired-end reads within a few minutes on a standard desktop computer. On multi-core architectures, the parallel version of PEAR shows linear speedups compared with the sequential version of PEAR. PEAR is implemented in C and uses POSIX threads. It is freely available at http://www.exelixis-lab.org/web/software/pear.

Navier-Stokes structure of merged layer flow on the spherical nose of a space vehicle

Science.gov (United States)

Jain, A. C.; Woods, G. H.

1988-01-01

Hypersonic merged layer flow on the forepart of a spherical surface of a space vehicle has been investigated on the basis of the full steady-state Navier-Stokes equations using slip and temperature jump boundary conditions at the surface and free-stream conditions far from the surface. The shockwave-like structure was determined as part of the computations. Using an equivalent body concept, computations were carried out under conditions that the Aeroassist Flight Experiment (AFE) Vehicle would encounter at 15 and 20 seconds in its flight path. Emphasis was placed on understanding the basic nature of the flow structure under low density conditions. Particular attention was paid to the understanding of the structure of the outer shockwave-like region as the fluid expands around the sphere. Plots were drawn for flow profiles and surface characteristics to understand the role of dissipation processes in the merged layer of the spherical nose of the vehicle.

Unravelling merging behaviors and electrostatic properties of CVD-grown monolayer MoS2 domains

International Nuclear Information System (INIS)

Hao, Song; Yang, Bingchu; Gao, Yongli

2016-01-01

The presence of grain boundaries is inevitable for chemical vapor deposition (CVD)-grown MoS 2 domains owing to various merging behaviors, which greatly limits its potential applications in novel electronic and optoelectronic devices. It is therefore of great significance to unravel the merging behaviors of the synthesized polygon shape MoS 2 domains. Here we provide systematic investigations of merging behaviors and electrostatic properties of CVD-grown polycrystalline MoS 2 crystals by multiple means. Morphological results exhibit various polygon shape features, ascribed to polycrystalline crystals merged with triangle shape MoS 2 single crystals. The thickness of triangle and polygon shape MoS 2 crystals is identical manifested by Raman intensity and peak position mappings. Three merging behaviors are proposed to illustrate the formation mechanisms of observed various polygon shaped MoS 2 crystals. The combined photoemission electron microscopy and kelvin probe force microscopy results reveal that the surface potential of perfect merged crystals is identical, which has an important implication for fabricating MoS 2 -based devices.

Interlayer magnetoresistance in multilayer Dirac electron systems: motion and merging of Dirac cones

OpenAIRE

Assili, Mohamed; Haddad, Sonia

2013-01-01

We theoretically study the effect of the motion and the merging of Dirac cone on the interlayer magnetoresistance in multilayer graphene like systems. This merging, which could be induced by a uniaxial strain, gives rise in monolayer Dirac electron system to a topological transition from a semi-metallic phase to an insulating phase where Dirac points disappear. Based on a universal Hamiltonian proposed to describe the motion and the merging of Dirac points in two dimensional Dirac electron cr...

Superconducting magnets, cryostats, and cryogenics for the interaction region of the SSC

International Nuclear Information System (INIS)

Jayakumar, R.J.; Abramovich, S.; Zhmad, A.

1993-10-01

The Superconducting Super Collider (SSC) has two counterrotating 20-TeV proton beams that will be made to collide at specific interaction points to carry out high energy physics experiments. The Collider ring has two sites, West and East, for such Interaction Regions (IRs), and the conceptual design of the East Interaction Region is underway. The East IR, in the present stage of design, has two interaction points, the requirements for which have been specified in terms of distance L* to the nearest magnet and the beam luminosity. Based on these requirements, the optics for transition from arc regions or utility regions to the IR and for focusing the beams have been obtained. The optical arrangement consists of a tuning section of quadrupoles, the strength of which is adjusted to obtain the required beta squeeze; a pair of bending dipoles to reduce the beam separation from the nominal 900 mm to 450 mm; an achromat section of quadrupoles, which consist of two cold masses in one cryostnother pair of dipoles to bring the beams together at the required crossing angle; and a set of final focus quads facing the interaction point. The optics is symmetric about the interaction point, and the two interaction points are separated by a hinge region consisting of superconducting dipoles and quadrupoles similar to the arc region. In the regions where the beams are vertically bent and straightened out by dipoles, the beam traverses warm regions provided for placing beam collimators. The superconducting magnets, including the final focus quadrupoles, operate with supercritical He at 4 atm and a nominal temperature of 4.15 K. In this paper, descriptions of the magnets, the cryostats, and cryo bypasses around the warm region and interaction points are provided. Also discussed are the cooling requirements and design for the final focus quadrupole, which receives significant heat load from beam radiation

Virtual microscopy: merging of computer mediated communication and intuitive interfacing

Science.gov (United States)

de Ridder, Huib; de Ridder-Sluiter, Johanna G.; Kluin, Philip M.; Christiaans, Henri H. C. M.

2009-02-01

Ubiquitous computing (or Ambient Intelligence) is an upcoming technology that is usually associated with futuristic smart environments in which information is available anytime anywhere and with which humans can interact in a natural, multimodal way. However spectacular the corresponding scenarios may be, it is equally challenging to consider how this technology may enhance existing situations. This is illustrated by a case study from the Dutch medical field: central quality reviewing for pathology in child oncology. The main goal of the review is to assess the quality of the diagnosis based on patient material. The sharing of knowledge in social face-to-face interaction during such meeting is an important advantage. At the same time there is the disadvantage that the experts from the seven Dutch academic medical centers have to travel to the review meeting and that the required logistics to collect and bring patient material and data to the meeting is cumbersome and time-consuming. This paper focuses on how this time-consuming, nonefficient way of reviewing can be replaced by a virtual collaboration system by merging technology supporting Computer Mediated Collaboration and intuitive interfacing. This requires insight in the preferred way of communication and collaboration as well as knowledge about preferred interaction style with a virtual shared workspace.

Automatic beam centering at the SSC interaction regions

International Nuclear Information System (INIS)

Joestlein, H.

1984-01-01

In the SSC interaction regions, the two colliding beams, each only a few microns in size, will have to be centered and maintained in good alignment over many hours, in order to provide the maximum possible luminosity and to minimize off-center beam-beam focussing effects. It is unlikely that sufficiently good alignment can be achieved without some kind of active feedback system, based on the beam-beam interaction rate. This memo describes such a system. In the proposed scheme, one of the beams is moved continuously and in a circular fashion about its mean transverse position. The radius of this motion is approximately 0.01 of the rms beam size at the interaction point. The motion is achieved with two sets of crossed high frequency dipole magnets, one on each side of the interaction region, suitably phased. As a consequence of this motion, the beam-beam interaction rate is modulated in synchronism with the beam motion when the beams are not centered on one another. The amplitude and phase of this modulation yields information on the magnitude and direction of the misalignment between the beams, allowing continuous display and automatic correction of any misalignment

Galaxies interactions and induced star formation

CERN Document Server

Kennicutt Jr, Robert C; Barnes, JE

1998-01-01

The papers that make up this volume present a comprehensive review of the field of galaxy interaction. Galaxies are dynamic forces that evolve, interact, merge, blaze and reshape. This book offers a historical perspective and studies such topics as induced star formation.

Droplets Formation and Merging in Two-Phase Flow Microfluidics

Directory of Open Access Journals (Sweden)

Hao Gu

2011-04-01

Full Text Available Two-phase flow microfluidics is emerging as a popular technology for a wide range of applications involving high throughput such as encapsulation, chemical synthesis and biochemical assays. Within this platform, the formation and merging of droplets inside an immiscible carrier fluid are two key procedures: (i the emulsification step should lead to a very well controlled drop size (distribution; and (ii the use of droplet as micro-reactors requires a reliable merging. A novel trend within this field is the use of additional active means of control besides the commonly used hydrodynamic manipulation. Electric fields are especially suitable for this, due to quantitative control over the amplitude and time dependence of the signals, and the flexibility in designing micro-electrode geometries. With this, the formation and merging of droplets can be achieved on-demand and with high precision. In this review on two-phase flow microfluidics, particular emphasis is given on these aspects. Also recent innovations in microfabrication technologies used for this purpose will be discussed.

Particle image velocimetry measurements of the flow in the converging region of two parallel jets

Energy Technology Data Exchange (ETDEWEB)

Wang, Huhu, E-mail: huhuwang@tamu.edu; Lee, Saya, E-mail: sayalee@tamu.edu; Hassan, Yassin A., E-mail: y-hassan@tamu.edu

2016-09-15

Highlights: • The flow behaviors in the converging region were non-intrusively investigated using PIV. • The PIV results using two measuring scales and LDV data matched very well. • Significant momentum transfer was observed in the merging region right after the merging point. • Instantaneous vector field revealed characteristic interacting patterns of the jets. - Abstract: The interaction between parallel jets plays a critical role in determining the characteristics of the momentum and heat transfer in the flow. Specifically for next generation VHTR, the output temperature will be about 900 °C, and any thermal oscillations will create safety issues. The mixing variations of the coolants in the reactor core may influence these power oscillations. Numerous numerical tools such as computational fluid dynamics (CFD) simulations have been used to support the reactor design. The validation of CFD method is important to ensure the fidelity of the calculations. This requires high-fidelity, qualified benchmark data. Particle image velocimetry (PIV), a non-intrusive measuring technique, was used to provide benchmark data for resolving a simultaneous flow field in the converging region of two submerged parallel jets issued from rectangular channels. The jets studied in this work had an equal discharge velocity at room temperature. The turbulent characteristics including the distributions of mean velocities, turbulence intensities, Reynolds stresses and z-component vorticity were studied. The streamwise mean velocity measured by PIV and LDV were compared, and they agreed very well.

Optimized distributed systems achieve significant performance improvement on sorted merging of massive VCF files.

Science.gov (United States)

Sun, Xiaobo; Gao, Jingjing; Jin, Peng; Eng, Celeste; Burchard, Esteban G; Beaty, Terri H; Ruczinski, Ingo; Mathias, Rasika A; Barnes, Kathleen; Wang, Fusheng; Qin, Zhaohui S

2018-06-01

Sorted merging of genomic data is a common data operation necessary in many sequencing-based studies. It involves sorting and merging genomic data from different subjects by their genomic locations. In particular, merging a large number of variant call format (VCF) files is frequently required in large-scale whole-genome sequencing or whole-exome sequencing projects. Traditional single-machine based methods become increasingly inefficient when processing large numbers of files due to the excessive computation time and Input/Output bottleneck. Distributed systems and more recent cloud-based systems offer an attractive solution. However, carefully designed and optimized workflow patterns and execution plans (schemas) are required to take full advantage of the increased computing power while overcoming bottlenecks to achieve high performance. In this study, we custom-design optimized schemas for three Apache big data platforms, Hadoop (MapReduce), HBase, and Spark, to perform sorted merging of a large number of VCF files. These schemas all adopt the divide-and-conquer strategy to split the merging job into sequential phases/stages consisting of subtasks that are conquered in an ordered, parallel, and bottleneck-free way. In two illustrating examples, we test the performance of our schemas on merging multiple VCF files into either a single TPED or a single VCF file, which are benchmarked with the traditional single/parallel multiway-merge methods, message passing interface (MPI)-based high-performance computing (HPC) implementation, and the popular VCFTools. Our experiments suggest all three schemas either deliver a significant improvement in efficiency or render much better strong and weak scalabilities over traditional methods. Our findings provide generalized scalable schemas for performing sorted merging on genetics and genomics data using these Apache distributed systems.

Regional cooperation in transportation planning.

Science.gov (United States)

2012-02-01

As Floridas urbanized areas grow and merge, : neighboring jurisdictions experience interrelated : problems and opportunities, and regional : cooperation becomes an imperative. In the : transportation sector, Floridas metropolitan : planning org...

PROCEEDINGS OF THE WORKSHOP ON LHC INTERACTION REGION CORRECTION SYSTEMS

International Nuclear Information System (INIS)

FISCHER, W.; WEI, J.

1999-01-01

The Workshop on LHC Interaction Region Correction Systems was held at Brookhaven National Laboratory, Upton, New York, on 6 and 7 May 1999. It was attended by 25 participants from 5 institutions. The performance of the Large Hadron Collider (LHC) at collision energy is limited by the field quality of the interaction region quadrupoles and dipoles. In three sessions the workshop addressed the field quality of the these magnets, reviewed the principles and efficiency of global and local correction schemes and finalized a corrector layout. The session on Field Quality Issues, chaired by J. Strait (FNAL), discussed the progress made by KEK and FNAL in achieving the best possible field quality in the interaction region quadrupoles. Results of simulation studies were presented that assess the effects of magnetic field errors with simulation studies. Attention was given to the uncertainties in predicting and measuring field errors. The session on Global Correction, chaired by J.-P. Koutchouk (CERN), considered methods of reducing the nonlinear detuning or resonance driving terms in the accelerator one-turn map by either sorting or correcting. The session also discussed the crossing angle dependence of the dynamic aperture and operational experience from LEP. The session on Local Correction, chaired by T. Taylor (CERN), discussed the location, strength and effectiveness of multipole correctors in the interaction regions for both proton and heavy ion operation. Discussions were based on technical feasibility considerations and dynamic aperture requirements. The work on linear corrections in the interaction regions was reviewed

2013 NOAA Coastal California TopoBathy Merge Project

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This project merged recently collected topographic, bathymetric, and acoustic elevation data along the entire California coastline from approximately the 10 meter...

A Prospect for Evolutionary Adequacy: Merge and the Evolution and Development of Human Language

Directory of Open Access Journals (Sweden)

Koji Fujita

2009-09-01

Full Text Available Biolinguistic minimalism seeks a deeper explanation of the design, development and evolution of human language by reducing its core domain to the bare minimum including the set-formation operation Merge. In an attempt to open an avenue of research that may lead to an evolutionarily adequate theory of language, this article makes the following proposals: (i Merge is the elementary combinatorial device that requires no more decomposition; (ii the precursor to Merge may be found in the uniquely human capacity for hierarchical object manipulation; (iii the uniqueness of the human lexicon may also be captured in terms of Merge. Empirical validations of these proposals should constitute one major topic for the biolinguistic program.

Unravelling merging behaviors and electrostatic properties of CVD-grown monolayer MoS{sub 2} domains

Energy Technology Data Exchange (ETDEWEB)

Hao, Song; Yang, Bingchu, E-mail: bingchuyang@csu.edu.cn [College of Physics and Electronics, Institute of Super Microstructure and Ultrafast Process in Advanced Materials, Central South University, 605 South Lushan Road, Changsha 410012 (China); Hunan Key Laboratory for Super-Microstructure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha 410012 (China); Gao, Yongli [College of Physics and Electronics, Institute of Super Microstructure and Ultrafast Process in Advanced Materials, Central South University, 605 South Lushan Road, Changsha 410012 (China); Hunan Key Laboratory for Super-Microstructure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha 410012 (China); Department of Physics and Astronomy, University of Rochester, Rochester, New York 14534 (United States)

2016-08-28

The presence of grain boundaries is inevitable for chemical vapor deposition (CVD)-grown MoS{sub 2} domains owing to various merging behaviors, which greatly limits its potential applications in novel electronic and optoelectronic devices. It is therefore of great significance to unravel the merging behaviors of the synthesized polygon shape MoS{sub 2} domains. Here we provide systematic investigations of merging behaviors and electrostatic properties of CVD-grown polycrystalline MoS{sub 2} crystals by multiple means. Morphological results exhibit various polygon shape features, ascribed to polycrystalline crystals merged with triangle shape MoS{sub 2} single crystals. The thickness of triangle and polygon shape MoS{sub 2} crystals is identical manifested by Raman intensity and peak position mappings. Three merging behaviors are proposed to illustrate the formation mechanisms of observed various polygon shaped MoS{sub 2} crystals. The combined photoemission electron microscopy and kelvin probe force microscopy results reveal that the surface potential of perfect merged crystals is identical, which has an important implication for fabricating MoS{sub 2}-based devices.

Transient and intermittent magnetic reconnections in TS-3/UTST merging startup experiments

International Nuclear Information System (INIS)

Ono, Y.; Imazawa, R.; Imanaka, H.; Hayamizu, T.; Inomoto, M.; Sato, M.; Kawamori, E.; Ejiri, A.; Takase, Y.; Asai, T.; Takahashi, T.

2007-01-01

The high-power reconnection heating has been developed in the TS-3 merging experiments, leading us to a new pulsed high-beta spherical tokamak (ST) formation. Two ST plasmas were produced inductively by two or four PF coils without using any central solenoid (CS) coil and were merged together for MW-GW reconnection heating. The magnetic reconnection transformed the magnetic energy of reconnecting magnetic field through the outflow kinetic energy finally to the ion thermal energy, increasing the plasma beta of ST up to 0.5. A new finding is that ejection of current sheet (or plasmoid) causes high-speed merging/ reconnection as well as high-power heating. In the high-q ST merging, the sheet resistivity was almost classical due to the sheet thickness much longer than ion gyroradius. Large inflow flux and low current-sheet dissipation resulted in flux pileup followed by rapid growth of the current sheet. When the flux pileup exceeded a critical limit, the sheet was ejected mechanically from the squeezed X-point area. The reconnection (outflow) speed was slow during the flux pileup and was fast during the ejection, indicating that intermittent reconnection similar to the solar flare increased the averaged reconnection speed. These transient effects enable us to have the fast reconnection as well as the high-power reconnection heating, even if the merging high-q tokamaks have low current-sheet resistivity. (author)

Automated cloud screening of AVHRR imagery using split-and-merge clustering

Science.gov (United States)

Gallaudet, Timothy C.; Simpson, James J.

1991-01-01

Previous methods to segment clouds from ocean in AVHRR imagery have shown varying degrees of success, with nighttime approaches being the most limited. An improved method of automatic image segmentation, the principal component transformation split-and-merge clustering (PCTSMC) algorithm, is presented and applied to cloud screening of both nighttime and daytime AVHRR data. The method combines spectral differencing, the principal component transformation, and split-and-merge clustering to sample objectively the natural classes in the data. This segmentation method is then augmented by supervised classification techniques to screen clouds from the imagery. Comparisons with other nighttime methods demonstrate its improved capability in this application. The sensitivity of the method to clustering parameters is presented; the results show that the method is insensitive to the split-and-merge thresholds.

Practical improvements and merging of POWHEG simulations for vector boson production

International Nuclear Information System (INIS)

Aliolo, Simone; Hamilton, Keith; Re, Emanuele

2011-10-01

In this article we generalise POWHEG next-to-leading order parton shower (NLOPS) simulations of vector boson production and vector boson production in association with a single jet, to give matrix element corrected MENLOPS simulations. In so doing we extend and provide, for the first time, an exact and faithful implementation of the MENLOPS formalism in hadronic collisions. We also consider merging the resulting event samples according to a phase space partition defined in terms of an effective jet clustering scale. The merging scale is restricted such that the component generated by the associated production simulation does not impact on the NLO accuracy of inclusive vector boson production observables. The dependence of the predictions on the unphysical merging scale is demonstrated. Comparisons with Tevatron and LHC data are presented. (orig.)

Practical improvements and merging of POWHEG simulations for vector boson production

Energy Technology Data Exchange (ETDEWEB)

Aliolo, Simone [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Hamilton, Keith [Istituto Nazionale di Fisica Nucleare, Milan (Italy); Re, Emanuele [Durham Univ. (United Kingdom). Dept. of Physics

2011-10-15

In this article we generalise POWHEG next-to-leading order parton shower (NLOPS) simulations of vector boson production and vector boson production in association with a single jet, to give matrix element corrected MENLOPS simulations. In so doing we extend and provide, for the first time, an exact and faithful implementation of the MENLOPS formalism in hadronic collisions. We also consider merging the resulting event samples according to a phase space partition defined in terms of an effective jet clustering scale. The merging scale is restricted such that the component generated by the associated production simulation does not impact on the NLO accuracy of inclusive vector boson production observables. The dependence of the predictions on the unphysical merging scale is demonstrated. Comparisons with Tevatron and LHC data are presented. (orig.)

Creating an Excellence Oriented Post-merged Organisational ...

African Journals Online (AJOL)

This article specifically focuses on the importance of a structured approach to the implementation of employee engagement strategies in creating a post-merged organisational culture of excellent work performance. Theoretical insights from existing literature illustrate how a structured approach to the implementation of ...

Interaction Region Design for a Ring-Ring LHeC

CERN Document Server

Thompson, L N S; Bernard, N R; Fitterer, M; Holzer, B; Klein, M; Kostka, P

2011-01-01

tively low energy and moderately high intensity provides high luminosity TeV-scale e-p collisions at one of the LHC interaction points, running simultaneously with existing experiments. Two designs are studied; an electron ring situated in the LHC tunnel, and an electron linac. The focus of this paper is on the ring design. Designing an e-p machine presents interesting accelerator physics and design challenges, particularly when considering the interaction region. These include coupled optics, beam separation and unconventional mini-beta focusing schemes. Designs are constrained by an array of interdependent factors, including beam-beam interaction, detector dimensions and acceptance, luminosity and synchrotron radiation. Methods of addressing these complex issues are discussed. The current designs for the LHeC Ring-Ring interaction region and long straight section are presented and discussed, in the context of the project goals and design challenges encountered. Future developments and work are also discusse...

LP MOON MERGED TELEMETRY DATA V1.0

Data.gov (United States)

National Aeronautics and Space Administration — The Lunar Prospector merged telemetry data set is a result of comparing the two Lunar Prospector telemetry data streams and selecting one of them. The Lunar...

Toolsets for Airborne Data (TAD): Customized Data Merging Function

Science.gov (United States)

Benson, A.; Peeters, M. C.; Perez, J.; Parker, L.; Chen, G.

2013-12-01

NASA has conducted airborne tropospheric chemistry studies for about three decades. These field campaigns have generated a great wealth of observations, including a wide range of the trace gases and aerosol properties. The ASDC Toolset for Airborne Data (TAD) is being designed to meet the user community needs for manipulating aircraft data for scientific research on climate change and air quality relevant issues. Prior to the actual toolset development, a comprehensive metadata database was created to compensate for the absence of standardization of the ICARTT data format in which the data is stored. This database tracks the Principal Investigator-provided metadata, and links the measurement variables to a common naming system that was developed as a part of this project. This database is used by the data merging module. Most aircraft data reported during a single flight is not on a consistent time base and is difficult to intercompare. This module provides the user with the ability to merge original data measurements from multiple data providers into a specified time interval or common time base. The database development, common naming scheme and data merge module development will be presented.

Algorithm 426 : Merge sort algorithm [M1

NARCIS (Netherlands)

Bron, C.

1972-01-01

Sorting by means of a two-way merge has a reputation of requiring a clerically complicated and cumbersome program. This ALGOL 60 procedure demonstrates that, using recursion, an elegant and efficient algorithm can be designed, the correctness of which is easily proved [2]. Sorting n objects gives

Inclusive cross sections in ME+PS merging

International Nuclear Information System (INIS)

Plaetzer, Simon

2013-07-01

We discuss an extension of matrix element plus parton shower merging at leading and next-to-leading order. The algorithm does preserve inclusive cross sections at the respective input order. This constraint avoids potentially large logarithmic contributions, which would require approximate (N)NLO contributions to cancel against.

Merging Satellite Precipitation Products for Improved Streamflow Simulations

Science.gov (United States)

Maggioni, V.; Massari, C.; Barbetta, S.; Camici, S.; Brocca, L.

2017-12-01

Accurate quantitative precipitation estimation is of great importance for water resources management, agricultural planning and forecasting and monitoring of natural hazards such as flash floods and landslides. In situ observations are limited around the Earth, especially in remote areas (e.g., complex terrain, dense vegetation), but currently available satellite precipitation products are able to provide global precipitation estimates with an accuracy that depends upon many factors (e.g., type of storms, temporal sampling, season, etc.). The recent SM2RAIN approach proposes to estimate rainfall by using satellite soil moisture observations. As opposed to traditional satellite precipitation methods, which sense cloud properties to retrieve instantaneous estimates, this new bottom-up approach makes use of two consecutive soil moisture measurements for obtaining an estimate of the fallen precipitation within the interval between two satellite overpasses. As a result, the nature of the measurement is different and complementary to the one of classical precipitation products and could provide a different valid perspective to substitute or improve current rainfall estimates. Therefore, we propose to merge SM2RAIN and the widely used TMPA 3B42RT product across Italy for a 6-year period (2010-2015) at daily/0.25deg temporal/spatial scale. Two conceptually different merging techniques are compared to each other and evaluated in terms of different statistical metrics, including hit bias, threat score, false alarm rates, and missed rainfall volumes. The first is based on the maximization of the temporal correlation with a reference dataset, while the second is based on a Bayesian approach, which provides a probabilistic satellite precipitation estimate derived from the joint probability distribution of observations and satellite estimates. The merged precipitation products show a better performance with respect to the parental satellite-based products in terms of categorical

Merging of gamma radiographic and ultrasonic inspection data: bibliographical survey

International Nuclear Information System (INIS)

Gautier, S.

1995-01-01

This paper presents a number of experimental data processing notions with the aim of developing an NDT method based on merging ultrasonic and gamma radiographic data. We first review the industrial context concerned and, before moving on to specific data merging problems, we discuss the difficulties of reconstruction using only one type of data (radiographic or ultrasonic). The main part of the report begins with a brief reminder of gamma radiation and ultrasonic wave propagation principles. Certain imaging and reconstruction methods conventionally used for each type of measurement are also presented. Reconstruction problems are then directly approached in algebraic form. For the type of problem studied, the inspection data alone cannot lead to satisfactory reconstructions and we evidence the need to regulate the problem by introducing deductive information on the object to be reconstructed. The Bayes' approach provides a self-consistent means of integrating both the data information and the deductive information. It is based on probabilistic models of the variables involved, notably those of the object sought. We discuss at some length certain models of images used in gamma radiography (independent variable fields, variables having a Markov-type structure) and the Bernoulli-Gauss-type models used for ultrasonic trace deconvolution. Finally, we outline data merging paths. A formal Bayes' framework is used to present two merging approaches, after which we briefly describe our projects for the processing of already available experimental data. (author)

Drivers' Visual Characteristics when Merging onto or Exiting an Urban Expressway.

Directory of Open Access Journals (Sweden)

Ying Cheng

Full Text Available The aim of this study is to examine drivers' visual and driving behavior while merging onto or exiting an urban expressway with low and high traffic densities. The analysis was conducted according to three periods (approaching, merging or exiting, and accelerating or decelerating. A total of 10 subjects (8 males and 2 females with ages ranging from 25 to 52 years old (M = 30.0 years old participated in the study. The research was conducted in a natural driving situation, and the drivers' eye movements were monitored and recorded using an eye tracking system. The results show that the influence of traffic density on the glance duration and scan duration is more significant when merging than when exiting. The results also demonstrate that the number of glances and the mean glance duration are mainly related to the driving task (e.g., the merging period. Therefore, drivers' visual search strategies mainly depend on the current driving task. With regard to driving behavior, the variation tendencies of the duration and the velocity of each period are similar. These results support building an automated driving assistant system that can automatically identify gaps and accelerate or decelerate the car accordingly or provide suggestions to the driver to do so.

Study of flow behaviors of droplet merging and splitting in microchannels using Micro-PIV measurement

Science.gov (United States)

Li, Yi; Liu, Zhaomiao

2017-01-01

Droplet merging and splitting are important droplet manipulations in droplet-based microfluidics. However, the fundamental flow behaviors of droplets were not systematically studied. Hence, we designed two different microstructures to achieve droplet merging and splitting respectively, and quantitatively compared different flow dynamics in different microstructures for droplet merging and splitting via micro-particle image velocimetry (micro-PIV) experiments. Some flow phenomena of droplets different from previous studies were observed during merging and splitting using a high-speed microscope. It was also found the obtained instantaneous velocity vector fields of droplets have significant influence on the droplets merging and splitting. For droplet merging, the probability of droplets coalescence (η) in a microgroove is higher (50% T-junction microchannel (15% < η < 50%), and the highest coalescence efficiency (η = 92%) comes at the two-phase flow ratio e of 0.42 in the microgroove. Moreover, compared with a cylinder obstacle, Y-junction bifurcation can split droplets more effectively and the droplet flow during splitting is steadier. The results can provide better understanding of droplet behaviors and are useful for the design and applications of droplet-based microfluidics. PMID:28890680

Study of flow behaviors of droplet merging and splitting in microchannels using Micro-PIV measurement.

Science.gov (United States)

Shen, Feng; Li, Yi; Liu, Zhaomiao; Li, XiuJun

2017-04-01

Droplet merging and splitting are important droplet manipulations in droplet-based microfluidics. However, the fundamental flow behaviors of droplets were not systematically studied. Hence, we designed two different microstructures to achieve droplet merging and splitting respectively, and quantitatively compared different flow dynamics in different microstructures for droplet merging and splitting via micro-particle image velocimetry (micro-PIV) experiments. Some flow phenomena of droplets different from previous studies were observed during merging and splitting using a high-speed microscope. It was also found the obtained instantaneous velocity vector fields of droplets have significant influence on the droplets merging and splitting. For droplet merging, the probability of droplets coalescence ( η ) in a microgroove is higher (50% < η < 92%) than that in a T-junction microchannel (15% < η < 50%), and the highest coalescence efficiency ( η = 92%) comes at the two-phase flow ratio e of 0.42 in the microgroove. Moreover, compared with a cylinder obstacle, Y-junction bifurcation can split droplets more effectively and the droplet flow during splitting is steadier. The results can provide better understanding of droplet behaviors and are useful for the design and applications of droplet-based microfluidics.

Tweek: Merging 2D and 3D Interaction in Immersive Environments

Directory of Open Access Journals (Sweden)

Patrick L Hartling

2003-06-01

Full Text Available Developers of virtual environments (VEs face an oftendifficult problem: users must have some way to interact with the virtual world. The application designers must determine how to map available inputs (button presses, hand gestures, etc. to actions within the VE. As a result, interaction within a VE is perhaps the most limiting factor for the development of complex virtual reality (VR applications. For example, interactions with large amounts of data, alphanumeric information, or abstract operations may not map well to current VR interaction methods, which are primarily spatial. Instead, twodimensional (2D interaction could be more effective. Current practices often involve the development of customized interfaces for each application. The custom interfaces try to match the capabilities of the available input devices. To address these issues, we have developed a middleware tool called Tweek. Tweek presents users with an extensible 2D Java graphical user interface (GUI that communicates with VR applications. Using this tool, developers are free to create a GUI that provides extended capabilities for interacting with a VE. This paper covers in detail the design of Tweek and its use with VR Juggler, an open source virtual reality development tool.

Interlayer magnetoresistance in multilayer Dirac electron systems: motion and merging of Dirac cones

International Nuclear Information System (INIS)

Assili, M; Haddad, S

2013-01-01

We theoretically study the effect of the motion and the merging of Dirac cones on the interlayer magnetoresistance in multilayer graphene-like systems. This merging, which can be induced by a uniaxial strain, gives rise in a monolayer Dirac electron system to a topological transition from a semi-metallic phase to an insulating phase whereby Dirac points disappear. Based on a universal Hamiltonian, proposed to describe the motion and the merging of Dirac points in two-dimensional Dirac electron crystals, we calculate the interlayer conductivity of a stack of deformed graphene-like layers using the Kubo formula in the quantum limit where only the contribution of the n = 0 Landau level is relevant. A crossover from a negative to a positive interlayer magnetoresistance is found to take place as the merging is approached. This sign change of the magnetoresistance can also result from a coupling between the Dirac valleys, which is enhanced as the magnetic field amplitude increases. Our results describe the behavior of the magnetotransport in the organic conductor α-(BEDT) 2 I 3 and in a stack of deformed graphene-like systems. The latter can be simulated by optical lattices or microwave experiments in which the merging of Dirac cones can be observed. (paper)

Interlayer magnetoresistance in multilayer Dirac electron systems: motion and merging of Dirac cones

Science.gov (United States)

Assili, M.; Haddad, S.

2013-09-01

We theoretically study the effect of the motion and the merging of Dirac cones on the interlayer magnetoresistance in multilayer graphene-like systems. This merging, which can be induced by a uniaxial strain, gives rise in a monolayer Dirac electron system to a topological transition from a semi-metallic phase to an insulating phase whereby Dirac points disappear. Based on a universal Hamiltonian, proposed to describe the motion and the merging of Dirac points in two-dimensional Dirac electron crystals, we calculate the interlayer conductivity of a stack of deformed graphene-like layers using the Kubo formula in the quantum limit where only the contribution of the n = 0 Landau level is relevant. A crossover from a negative to a positive interlayer magnetoresistance is found to take place as the merging is approached. This sign change of the magnetoresistance can also result from a coupling between the Dirac valleys, which is enhanced as the magnetic field amplitude increases. Our results describe the behavior of the magnetotransport in the organic conductor α-(BEDT)2I3 and in a stack of deformed graphene-like systems. The latter can be simulated by optical lattices or microwave experiments in which the merging of Dirac cones can be observed.

Interlayer magnetoresistance in multilayer Dirac electron systems: motion and merging of Dirac cones.

Science.gov (United States)

Assili, M; Haddad, S

2013-09-11

We theoretically study the effect of the motion and the merging of Dirac cones on the interlayer magnetoresistance in multilayer graphene-like systems. This merging, which can be induced by a uniaxial strain, gives rise in a monolayer Dirac electron system to a topological transition from a semi-metallic phase to an insulating phase whereby Dirac points disappear. Based on a universal Hamiltonian, proposed to describe the motion and the merging of Dirac points in two-dimensional Dirac electron crystals, we calculate the interlayer conductivity of a stack of deformed graphene-like layers using the Kubo formula in the quantum limit where only the contribution of the n = 0 Landau level is relevant. A crossover from a negative to a positive interlayer magnetoresistance is found to take place as the merging is approached. This sign change of the magnetoresistance can also result from a coupling between the Dirac valleys, which is enhanced as the magnetic field amplitude increases. Our results describe the behavior of the magnetotransport in the organic conductor α-(BEDT)2I3 and in a stack of deformed graphene-like systems. The latter can be simulated by optical lattices or microwave experiments in which the merging of Dirac cones can be observed.

LINEAR AND NONLINEAR CORRECTIONS IN THE RHIC INTERACTION REGIONS

International Nuclear Information System (INIS)

PILAT, F.; CAMERON, P.; PTITSYN, V.; KOUTCHOUK, J.P.

2002-01-01

A method has been developed to measure operationally the linear and non-linear effects of the interaction region triplets, that gives access to the multipole content through the action kick, by applying closed orbit bumps and analyzing tune and orbit shifts. This technique has been extensively tested and used during the RHIC operations in 2001. Measurements were taken at 3 different interaction regions and for different focusing at the interaction point. Non-linear effects up to the dodecapole have been measured as well as the effects of linear, sextupolar and octupolar corrections. An analysis package for the data processing has been developed that through a precise fit of the experimental tune shift data (measured by a phase lock loop technique to better than 10 -5 resolution) determines the multipole content of an IR triplet

Observations and Modeling of Merging Galaxy Clusters

Science.gov (United States)

Golovich, Nathan Ryan

of two individual merging clusters. Each are largely bimodal mergers occurring in the plane of the sky. We build on the dynamical analyses of Dawson (2013b) and Ng et al. (2015) in order to constrain the merger speeds, timescales, and geometry for these two systems, which are among a gold sample earmarked for further follow up. Findings: MACS J1149.5+2223 has a previously unidentified southern subcluster involved in a major merger with the well-studied northern subcluster. We confirm the system to be among the most massive clusters known, and we study the dynamics of the merger. MACS J1149.5+2223 appears to be a more evolved system than the Bullet Cluster observed near apocenter. ZwCl 0008.8+5215 is a less massive but a bimodal system with two radio relics and a cool-core "bullet" analogous to the namesake of the Bullet Cluster. These two systems occupy different regions of merger phase space with the pericentric relative velocities of ˜2800 km s-1 and ˜1800 km s-1 for MACS J1149.5+2223 and ZwCl 0008.8+5215, respectively. The time since pericenter for the observed states are ˜1.2 Gyr and ˜0.8 Gyr, respectivel. In the ensemble analysis, we confirm that radio relic selection is an efficient trigger for the identification of major mergers. In particular, 28 of the 29 systems exhibit galaxy substructure aligned with the radio relics and the disturbed intra-cluster medium. Radio relics are typically aligned within 20° of the axis connecting the two galaxy subclusters. Furthermore, when radio relics are aligned with substructure, the line of sight velocity difference between the two subclusters is small compared with the infall velocity. This strongly implies radio relic selection is an efficient selector of systems merging in the plane of the sky. While many of the systems are complex with several simultaneous merging subclusters, these systems generally only contain one radio relic. Systems with double radio relics uniformly suggest major mergers with two dominant

Self-interacting dark matter

Science.gov (United States)

Mavromatos, Nick E.; Argüelles, Carlos R.; Ruffini, Remo; Rueda, Jorge A.

Self-interacting dark matter (SIDM) is a hypothetical form of dark matter (DM), characterized by relatively strong (compared to the weak interaction strength) self-interactions (SIs), which has been proposed to resolve a number of issues concerning tensions between simulations and observations at the galactic or smaller scales. We review here some recent developments discussed at the 14th Marcel Grossmann Meeting (MG14), paying particular attention to restrictions on the SIDM (total) cross-section from using novel observables in merging galactic structures, as well as the rôle of SIDM on the Milky Way halo and its central region. We report on some interesting particle-physics inspired SIDM models that were discussed at MG14, namely the glueball DM, and a right-handed neutrino DM (with mass of a few tens of keV, that may exist in minimal extensions of the standard model (SM)), interacting among themselves via vector bosons mediators in the dark sector. A detailed phenomenology of the latter model on galactic scales, as well as the potential role of the right handed neutrinos in alleviating some of the small-scale cosmology problems, namely the discrepancies between observations and numerical simulations within standard ΛCDM and ΛWDM cosmologies are reported.

Experimental evidence for collisional shock formation via two obliquely merging supersonic plasma jets

Energy Technology Data Exchange (ETDEWEB)

Merritt, Elizabeth C., E-mail: emerritt@lanl.gov; Adams, Colin S. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); University of New Mexico, Albuquerque, New Mexico 87131 (United States); Moser, Auna L.; Hsu, Scott C., E-mail: scotthsu@lanl.gov; Dunn, John P.; Miguel Holgado, A. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Gilmore, Mark A. [University of New Mexico, Albuquerque, New Mexico 87131 (United States)

2014-05-15

We report spatially resolved measurements of the oblique merging of two supersonic laboratory plasma jets. The jets are formed and launched by pulsed-power-driven railguns using injected argon, and have electron density ∼10{sup 14} cm{sup −3}, electron temperature ≈1.4 eV, ionization fraction near unity, and velocity ≈40 km/s just prior to merging. The jet merging produces a few-cm-thick stagnation layer, as observed in both fast-framing camera images and multi-chord interferometer data, consistent with collisional shock formation [E. C. Merritt et al., Phys. Rev. Lett. 111, 085003 (2013)].

Attractor merging crisis in chaotic business cycles

International Nuclear Information System (INIS)

Chian, Abraham C.-L.; Borotto, Felix A.; Rempel, Erico L.; Rogers, Colin

2005-01-01

A numerical study is performed on a forced-oscillator model of nonlinear business cycles. An attractor merging crisis due to a global bifurcation is analyzed using the unstable periodic orbits and their associated stable and unstable manifolds. Characterization of crisis can improve our ability to forecast sudden major changes in economic systems

Merging symmetry projection methods with coupled cluster theory: Lessons from the Lipkin model Hamiltonian

Energy Technology Data Exchange (ETDEWEB)

Wahlen-Strothman, J. M. [Rice Univ., Houston, TX (United States); Henderson, T. H. [Rice Univ., Houston, TX (United States); Hermes, M. R. [Rice Univ., Houston, TX (United States); Degroote, M. [Rice Univ., Houston, TX (United States); Qiu, Y. [Rice Univ., Houston, TX (United States); Zhao, J. [Rice Univ., Houston, TX (United States); Dukelsky, J. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia; Scuseria, G. E. [Rice Univ., Houston, TX (United States)

2018-01-03

Coupled cluster and symmetry projected Hartree-Fock are two central paradigms in electronic structure theory. However, they are very different. Single reference coupled cluster is highly successful for treating weakly correlated systems, but fails under strong correlation unless one sacrifices good quantum numbers and works with broken-symmetry wave functions, which is unphysical for finite systems. Symmetry projection is effective for the treatment of strong correlation at the mean-field level through multireference non-orthogonal configuration interaction wavefunctions, but unlike coupled cluster, it is neither size extensive nor ideal for treating dynamic correlation. We here examine different scenarios for merging these two dissimilar theories. We carry out this exercise over the integrable Lipkin model Hamiltonian, which despite its simplicity, encompasses non-trivial physics for degenerate systems and can be solved via diagonalization for a very large number of particles. We show how symmetry projection and coupled cluster doubles individually fail in different correlation limits, whereas models that merge these two theories are highly successful over the entire phase diagram. Despite the simplicity of the Lipkin Hamiltonian, the lessons learned in this work will be useful for building an ab initio symmetry projected coupled cluster theory that we expect to be accurate in the weakly and strongly correlated limits, as well as the recoupling regime.

Orbit correction system for the SSC interaction regions

International Nuclear Information System (INIS)

Nosochkov, Y.; Pilat, F.; Ritson, D.M.

1994-01-01

In this paper we review our design of the orbit correction system for the SSC interaction regions, and discuss the principles of the local orbit correction at the IP. copyright 1994 American Institute of Physics

Genesis of dwarf galaxies in interacting system

International Nuclear Information System (INIS)

Duc, Pierre-Alain

1995-01-01

This research thesis addresses the study of interacting and merging galaxies, and more particularly the associated stellar formation episodes. The author first reports an analysis of the central regions of these objects by studying a specific class among them, i.e. galaxies discovered by the IRAS satellite which are ultra-luminous in the far infrared. The author presents results obtained by optical and infrared imagery and spectroscopy of a complete sample of objects located in the southern hemisphere. In the second part, the author focusses on outside regions of interacting galaxies, discusses the observation of filaments formed under the influence of tidal forces acting during galactic collisions, and of condensations which are as luminous as dwarf galaxies. Then a multi-wavelength study of several neighbouring systems revealed the existence of a specific class of objects, the tidal dwarf galaxies, which are formed from stellar and gaseous material snatched from the disk of interacting galaxies. Gas-rich tidal dwarf galaxies contain, like dwarf irregular galaxies or blue compact galaxies, newly formed stars. But, in opposition with these ones, they are richer in heavy elements: this is one of the consequences of a specific mode of galactic formation based on a cosmic recycling [fr

Cold pool organization and the merging of convective updrafts in a Large Eddy Simulation

Science.gov (United States)

Glenn, I. B.; Krueger, S. K.

2016-12-01

Cold pool organization is a process that accelerates the transition from shallow to deep cumulus convection, and leads to higher deep convective cloud top heights. The mechanism by which cold pool organization enhances convection remains not well understood, but the basic idea is that since precipitation evaporation and a low equivalent potential temperature in the mid-troposphere lead to strong cold pools, the net cold pool effect can be accounted for in a cumulus parameterization as a relationship involving those factors. Understanding the actual physical mechanism at work will help quantify the strength of the relationship between cold pools and enhanced deep convection. One proposed mechanism of enhancement is that cold pool organization leads to reduced distances between updrafts, creating a local environment more conducive to convection as updrafts entrain parcels of air recently detrained by their neighbors. We take this hypothesis one step further and propose that convective updrafts actually merge, not just exchange recently processed air. Because entrainment and detrainment around an updraft draws nearby air in or pushes it out, respectively, they act like dynamic flow sources and sinks, drawing each other in or pushing each other away. The acceleration is proportional to the inverse square of the distance between two updrafts, so a small reduction in distance can make a big difference in the rate of merging. We have shown in previous research how merging can be seen as collisions between different updraft air parcels using Lagrangian Parcel Trajectories (LPTs) released in a Large Eddy Simulation (LES) during a period with organized deep convection. Now we use a Eulerian frame of reference to examine the updraft merging process during the transition from shallow to organized deep convection. We use a case based on the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA) for our LES. We directly measure the rate of entrainment and the properties

Merged Land and Ocean Surface Temperature, Version 3.5

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The historical Merged Land-Ocean Surface Temperature Analysis (MLOST) is derived from two independent analyses, an Extended Reconstructed Sea Surface Temperature...

Developing merged CDIO based curricula for diploma (B.Eng.) IT study programs at DTU

DEFF Research Database (Denmark)

Nyborg, Mads; Probst, Christian W.; Stassen, Flemming

2015-01-01

innovation strategy. In this paper we describe the process of developing new, merged B.Eng curricula in the IT field (Diploma IT), as part of the merger between DTU Lyngby and IHK. Particular attention will be given to the following subjects: • The design process used to develop the new merged study programs......) merged with the Technical University of Denmark (DTU Lyngby). The goal of the merger was to educate ever more innovative diploma engineers to fulfill the needs by Danish industry through combining a practice-oriented development environment and a research-oriented environment. Merging a university...... institutions represented before the merger well 3500 B.Eng. students. The goal of the merger was to combine the best of the existing educations rooted in a practice-oriented development environment and a research-oriented environment. At the same time, the merger was supposed to contribute to the national...

Using Spatial Semantics and Interactions to Identify Urban Functional Regions

Directory of Open Access Journals (Sweden)

Yandong Wang

2018-03-01

Full Text Available The spatial structures of cities have changed dramatically with rapid socio-economic development in ways that are not well understood. To support urban structural analysis and rational planning, we propose a framework to identify urban functional regions and quantitatively explore the intensity of the interactions between them, thus increasing the understanding of urban structures. A method for the identification of functional regions via spatial semantics is proposed, which involves two steps: (1 the study area is classified into three types of functional regions using taxi origin/destination (O/D flows; and (2 the spatial semantics for the three types of functional regions are demonstrated based on point-of-interest (POI categories. To validate the existence of urban functional regions, we explored the intensity of interactions quantitatively between them. A case study using POI data and taxi trajectory data from Beijing validates the proposed framework. The results show that the proposed framework can be used to identify urban functional regions and promotes an enhanced understanding of urban structures.

Sampling, Splitting and Merging in Coinductive Stream Calculus

NARCIS (Netherlands)

M. Niqui (Milad); J.J.M.M. Rutten (Jan); C. Bolduc; J. Desharnais; B. Ktari

2010-01-01

textabstractWe study various operations for partitioning, projecting and merging streams of data. These operations are motivated by their use in dataflow programming and the stream processing languages. We use the framework of \\emph{stream calculus} and \\emph{stream circuits} for defining and

Sampling, splitting and merging in coinductive stream calculus

NARCIS (Netherlands)

M. Niqui (Milad); J.J.M.M. Rutten (Jan)

2009-01-01

htmlabstractWe study various operations for partitioning, projecting and merging streams of data. These operations are motivated by their use in dataflow programming and the stream processing languages. We use the framework of stream calculus and stream circuits for defining and proving properties

Intermittent magnetic reconnection in TS-3 merging experiment

International Nuclear Information System (INIS)

Ono, Y.; Hayashi, Y.; Ii, T.; Tanabe, H.; Ito, S.; Kuwahata, A.; Ito, T.; Kamino, Y.; Yamada, T.; Inomoto, M.

2011-01-01

Ejection of current sheet with plasma mass causes impulsive and intermittent magnetic reconnection in the TS-3 spherical tokamak (ST) merging experiment. Under high guide toroidal field, the sheet resistivity is almost classical due to the sheet thickness much longer than the ion gyroradius. Large inflow flux and low current-sheet resistivity result in flux and plasma pileup followed by rapid growth of the current sheet. When the pileup exceeds a critical limit, the sheet is ejected mechanically from the squeezed X-point area. The reconnection (outflow) speed is slow during the flux/plasma pileup and is fast during the ejection, suggesting that intermittent reconnection similar to the solar flare increases the averaged reconnection speed. These transient effects enable the merging tokamaks to have the fast reconnection as well as the high-power reconnection heating, even when their current-sheet resistivity is low under high guide field.

Enhanced automation of ECCS at Temelin: the merging of Eastern and Western philosophies

International Nuclear Information System (INIS)

Burnett, T.; Sykora, M.

1997-01-01

After years of separate development, the Eastern and Western concept of safety is now being merged. A significant issue in this process is the philosophy of automation versus operator action for control of safety systems. The paper discusses some aspects of this issue and presents enhancements made at Temelin which merge the Eastern and Western philosophies. (author)

Vertical vs. Horizontal Integration: Pre-emptive Merging.

OpenAIRE

Colangelo, Giuseppe

1995-01-01

Preemption plays a crucial role in arms merger decisions. The author studies whether and under which circumstances preemptive merging occurs in vertically related industries. He finds that vertical mergers often preempt horizontal mergers and are dominant outcomes. Preempting the threat of a detrimental horizontal integration may be the main reason for vertically integrating. Copyright 1995 by Blackwell Publishing Ltd.

THE FORNAX DWARF GALAXY AS A REMNANT OF RECENT DWARF-DWARF MERGING IN THE LOCAL GROUP

International Nuclear Information System (INIS)

Yozin, C.; Bekki, K.

2012-01-01

We present results from the first numerical analysis to support the hypothesis, first proposed in Coleman et al., that the Fornax dwarf galaxy was formed from the minor merging of two dwarfs about 2 Gyr ago. Using orbits for the Fornax dwarf that are consistent with the latest proper motion measurements, our dynamical evolution models show that the observed asymmetric shell-like substructures can be formed from the remnant of a smaller dwarf during minor merging. These models also predict the formation of diffuse stellar streams. We discuss how these stellar substructures depend on model parameters of dwarf-dwarf merging, and how the intermediate-age subpopulations found in the vicinity of these substructures may be formed from gas accretion in past merger events. We also suggest that one of Fornax's globular clusters originates from a merged dwarf companion, and demonstrate where as yet undetected tidal streams or H I gas formed from the dwarf merging may be found in the outer halo of the Galaxy.

The importance of executive leadership in creating a post-merged organisational culture conducive to effective performance management

Directory of Open Access Journals (Sweden)

Gary W. Paul

2013-01-01

Full Text Available Orientation: Focus was placed on the important role of executive management in creating a post-merged organisational culture conducive to effective performance management.Research purpose: To develop a theoretical model from the insights gleaned from the literature study, interviews with senior human resource (HR practitioners at participating institutions and the empirical study. Based on the empirical findings, this model was refined and resulted in the eight-step integrated post-merged organisational culture creation model.Motivation for the study: The negligible attention given to the design of mechanisms supportive of post-merged organisational culture creation emphasised the need for this study. The high percentage of merger failures attributable to ineffective post-merged organisational culture integration further contributed.Research design, approach and method: A quantitative study was conducted at three merged South African higher education institutions, namely Nelson Mandela Metropolitan University, Cape Peninsula University of Technology and Durban University of Technology. Respondents occupied the following functional categories: executive management, senior and line management, HR practitioners and non-HR or non-management.Main findings: Respondents perceived the role of executive management to be the most important step of the theoretical model which formed the basis for the empirical survey questionnaire. This step, which obtained the highest summated mean score in all three institutions and across all functional categories, was depicted as Step 5 of the model.Practical/managerial implications: The refined eight-step integrated post-merged organisational culture creation model will significantly enhance the creation of a post-merged organisational culture conducive to effective performance management.Contribution/value-add: This study addressed the void regarding a model to guide the creation of a post-merged organisational

Estimation of Airline Benefits from Avionics Upgrade under Preferential Merge Re-sequence Scheduling

Science.gov (United States)

Kotegawa, Tatsuya; Cayabyab, Charlene Anne; Almog, Noam

2013-01-01

Modernization of the airline fleet avionics is essential to fully enable future technologies and procedures for increasing national airspace system capacity. However in the current national airspace system, system-wide benefits gained by avionics upgrade are not fully directed to aircraft/airlines that upgrade, resulting in slow fleet modernization rate. Preferential merge re-sequence scheduling is a best-equipped-best-served concept designed to incentivize avionics upgrade among airlines by allowing aircraft with new avionics (high-equipped) to be re-sequenced ahead of aircraft without the upgrades (low-equipped) at enroute merge waypoints. The goal of this study is to investigate the potential benefits gained or lost by airlines under a high or low-equipped fleet scenario if preferential merge resequence scheduling is implemented.

Coronal mass ejection and stream interaction region characteristics and their potential geomagnetic effectiveness

International Nuclear Information System (INIS)

Lindsay, G.M.; Russell, C.T.; Luhmann, J.G.

1995-01-01

Previous studies have indicated that the largest geomagnetic storms are caused by extraordinary increases in the solar wind velocity and/or southward interplanetary magnetic field (IMF) produced by coronal mass ejections (CMEs) and their associated interplanetary shocks. However, much more frequent small to moderate increases in solar wind velocity and compressions in the IMF can be caused by either coronal mass ejections or fast/slow stream interactions. This study examines the relative statistics of the magnitudes of disturbances associated with the passage of both interplanetary coronal mass ejections and stream interaction regions, using an exceptionally continuous interplanetary database from the Pioneer Venus Orbiter at 0.7 AU throughout most of solar cycle 21. It is found that both stream interaction and CMEs produce magnetic fields significantly larger than the nominal IMF. Increases in field magnitude that are up to 2 and 3 times higher than the ambient field are observed for stream interaction regions and CMEs, respectively. Both stream interactions and CMEs produce large positive and negative Β z components at 0.7 AU, but only CMEs produce Β z magnitudes greater than 35 nT. CMEs are often associated with sustained periods of positive or negative Β z whereas stream interaction regions are more often associated with fluctuating Β z . CMEs tend to produce larger solar wind electric fields than stream interactions. Yet stream interactions tend to produce larger dynamic pressures than CMEs. Dst predictions based on solar wind duskward electric field and dynamic pressure indicate that CMEs produce the largest geomagnetic disturbances while the low-speed portion of stream interaction regions are least geomagnetically effective. Both stream interaction regions and CMEs contribute to low and moderate levels of activity with relative importance determined by their solar-cycle-dependent occurrence rates

Mining CANDELS for Tidal Features to Constrain Major Merging During Cosmic Noon

Science.gov (United States)

McIntosh, Daniel H.; Mantha, Kameswara; Ciaschi, Cody; Evan, Rubyet A.; Fries, Logan B.; Landry, Luther; Thompson, Scott E.; Snyder, Gregory; Guo, Yicheng; Ceverino, Daniel; Häuβler, Boris; Primack, Joel; Simons, Raymond C.; Zheng, Xianzhong; Cosmic Assembly Near-Infrared Deep Extragalactic Legacy Survey (CANDELS) Team

2018-01-01

The role of major merging in the rapid buildup and development of massive galaxies at z>1 remains an open question. New theories and observations suggest that non-merging processes like violent disk instabilities may be more vital than previously thought at assembling bulges, producing clumps, and inducing morphological disturbances that may be misinterpreted as the product of major merging. We will present initial results on a systematic search for hallmark tidal indicators of major merging in a complete sample of nearly 6000 massive z>1 galaxies from CANDELS (Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey), the premiere HST/WFC3 Treasury program. We have visually inspected published GALFIT F160W residual (image-model) maps and produced a comprehensive new catalog of Sersic residual characteristics based on a variety of natural features and poor-fit artifacts. Using this catalog, we find the frequency of galaxies with tidal signatures is very small in CANDELS data. Accounting for the brief time scale associated with faint transient tidal features, our preliminary finding indicates that merger fractions derived from the CANDELS morphological classification efforts are substantially overestimated. We are using the database of residual classifications as a baseline to (1) produce improved multi-component residual maps using GALFIT_M, (2) automatically extract and quantify plausible tidal indicators and substructures (clumps vs. multiple nuclei), (3) develop a new deep-learning classification pipeline to robustly identify merger indicators in imaging data, and (4) inform the systematic analyses of synthetic mock (CANDELized) images from zoom-in hydrodynamic simulations to thoroughly quantify the impacts of cosmological dimming, and calibrate the observability timescale of tidal feature detections. Our study will ultimately yield novel constraints on merger rates at z>1 and a definitive census of massive high-noon galaxies with tidal and double

Design of the large hadron electron collider interaction region

Science.gov (United States)

Cruz-Alaniz, E.; Newton, D.; Tomás, R.; Korostelev, M.

2015-11-01

The large hadron electron collider (LHeC) is a proposed upgrade of the Large Hadron Collider (LHC) within the high luminosity LHC (HL-LHC) project, to provide electron-nucleon collisions and explore a new regime of energy and luminosity for deep inelastic scattering. The design of an interaction region for any collider is always a challenging task given that the beams are brought into crossing with the smallest beam sizes in a region where there are tight detector constraints. In this case integrating the LHeC into the existing HL-LHC lattice, to allow simultaneous proton-proton and electron-proton collisions, increases the difficulty of the task. A nominal design was presented in the the LHeC conceptual design report in 2012 featuring an optical configuration that focuses one of the proton beams of the LHC to β*=10 cm in the LHeC interaction point to reach the desired luminosity of L =1033 cm-2 s-1 . This value is achieved with the aid of a new inner triplet of quadrupoles at a distance L*=10 m from the interaction point. However the chromatic beta beating was found intolerable regarding machine protection issues. An advanced chromatic correction scheme was required. This paper explores the feasibility of the extension of a novel optical technique called the achromatic telescopic squeezing scheme and the flexibility of the interaction region design, in order to find the optimal solution that would produce the highest luminosity while controlling the chromaticity, minimizing the synchrotron radiation power and maintaining the dynamic aperture required for stability.

ISOON + SOLIS: Merging the Data Products

Science.gov (United States)

Radick, R.; Dalrymple, N.; Mozer, J.; Wiborg, P.; Harvey, J.; Henney, C.; Neidig, D.

2005-05-01

The combination of AFRL's ISOON and NSO's SOLIS offers significantly greater capability than the individual instruments. We are working toward merging the SOLIS and ISOON data products in a single central facility. The ISOON system currently includes both an observation facility and a remote analysis center (AC). The AC is capable of receiving data from both the ISOON observation facility as well as external sources. It archives the data and displays corrected images and time-lapse animations. The AC has a large number of digital tools that can be applied to solar images to provide quantitative information quickly and easily. Because of its convenient tools and ready archival capability, the ISOON AC is a natural place to merge products from SOLIS and ISOON. We have completed a preliminary integration of the ISOON and SOLIS data products. Eventually, we intend to distribute viewing stations to various users and academic institutions, install the AC software tools at a number of user locations, and publish ISOON/SOLIS data products jointly on a common web page. In addition, SOLIS data products, separately, are and will continue to be fully available on the NSO,s Digital Library and SOLIS web pages, and via the Virtual Solar Observatory. This work is being supported by the National Science Foundation and the Air Force Office of Scientific Research.

The importance of executive leadership in creating a post-merged organisational culture conducive to effective performance management

Directory of Open Access Journals (Sweden)

Gary W. Paul

2013-01-01

Research purpose: To develop a theoretical model from the insights gleaned from the literature study, interviews with senior human resource (HR practitioners at participating institutions and the empirical study. Based on the empirical findings, this model was refined and resulted in the eight-step integrated post-merged organisational culture creation model. Motivation for the study: The negligible attention given to the design of mechanisms supportive of post-merged organisational culture creation emphasised the need for this study. The high percentage of merger failures attributable to ineffective post-merged organisational culture integration further contributed. Research design, approach and method: A quantitative study was conducted at three merged South African higher education institutions, namely Nelson Mandela Metropolitan University, Cape Peninsula University of Technology and Durban University of Technology. Respondents occupied the following functional categories: executive management, senior and line management, HR practitioners and non-HR or non-management. Main findings: Respondents perceived the role of executive management to be the most important step of the theoretical model which formed the basis for the empirical survey questionnaire. This step, which obtained the highest summated mean score in all three institutions and across all functional categories, was depicted as Step 5 of the model. Practical/managerial implications: The refined eight-step integrated post-merged organisational culture creation model will significantly enhance the creation of a post-merged organisational culture conducive to effective performance management. Contribution/value-add: This study addressed the void regarding a model to guide the creation of a post-merged organisational culture conducive to effective performance management in higher education institutions as well as merged corporate organisations.

Regional Analysis of Energy, Water, Land and Climate Interactions

Science.gov (United States)

Tidwell, V. C.; Averyt, K.; Harriss, R. C.; Hibbard, K. A.; Newmark, R. L.; Rose, S. K.; Shevliakova, E.; Wilson, T.

2014-12-01

Energy, water, and land systems interact in many ways and are impacted by management and climate change. These systems and their interactions often differ in significant ways from region-to-region. To explore the coupled energy-water-land system and its relation to climate change and management a simple conceptual model of demand, endowment and technology (DET) is proposed. A consistent and comparable analysis framework is needed as climate change and resource management practices have the potential to impact each DET element, resource, and region differently. These linkages are further complicated by policy and trade agreements where endowments of one region are used to meet demands in another. This paper reviews the unique DET characteristics of land, energy and water resources across the United States. Analyses are conducted according to the eight geographic regions defined in the 2014 National Climate Assessment. Evident from the analyses are regional differences in resources endowments in land (strong East-West gradient in forest, cropland and desert), water (similar East-West gradient), and energy. Demands likewise vary regionally reflecting differences in population density and endowment (e.g., higher water use in West reflecting insufficient precipitation to support dryland farming). The effect of technology and policy are particularly evident in differences in the energy portfolios across the eight regions. Integrated analyses that account for the various spatial and temporal differences in regional energy, water and land systems are critical to informing effective policy requirements for future energy, climate and resource management. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Dynamics of vortex interactions in two-dimensional flows

DEFF Research Database (Denmark)

Juul Rasmussen, J.; Nielsen, A.H.; Naulin, V.

2002-01-01

The dynamics and interaction of like-signed vortex structures in two dimensional flows are investigated by means of direct numerical solutions of the two-dimensional Navier-Stokes equations. Two vortices with distributed vorticity merge when their distance relative to their radius, d/R-0l. is below...... a critical value, a(c). Using the Weiss-field, a(c) is estimated for vortex patches. Introducing an effective radius for vortices with distributed vorticity, we find that 3.3 ... is effectively producing small scale structures and the relation to the enstrophy "cascade" in developed 2D turbulence is discussed. The influence of finite viscosity on the merging is also investigated. Additionally, we examine vortex interactions on a finite domain, and discuss the results in connection...

Merging formation of FRC and its application to high-beta ST formation

International Nuclear Information System (INIS)

Ono, Y.; Inomoto, M.; Ueda, Y.; Matsuyama, T.; Ohshima, Y.; Katsurai, M.

2001-01-01

Merging formation of field-reversed configuration (FRC) explored not only a new scenario of highly-efficient FRC formation/amplification experiment but also a new boundary research between FRC, spheromak and spherical tokamak (ST). A new finding is that the produced FRC is transformed stably into an ultra-high-β ST by applying external toroidal field B t,ext . The toroidal field was observed to vanish around magnetic axis after the B t,ext application to the FRC, indicating formation of diamagnetic ST. The hollow current profile of FRC was maintained during the equilibrium transition, eliminating a need for the difficult hollow-current-formation process of start-up discharge of high-β ST. The energy-conversion effect of merging transformed the force-free merging spheromaks with paramagnetic current into the FRC with diamagnetic current and the further application of B t,ext did the FRC into the ultra-high-β (>60%)/diamagnetic ST, indicating the close relationship between FRC and ST in second stability. (author)

Second order chromaticity of the interaction regions in the collider

International Nuclear Information System (INIS)

Sen, T.; Syphers, M.J.

1993-01-01

The collider in the SSC has large second order chromaticity (ξ 2 ) with the interaction regions (IRs) contributing substantially to it. The authors calculate the general expression for ξ 2 in a storage ring and find that it is driven by the first order chromatic beta wave. Specializing to the interaction regions, they show that ξ 2 is a minimum when the phase advance (Δμ IP -IP) between adjacent interaction points is an odd multiple of π/2 and both IRs are identical. In this case the first order chromatic beta wave is confined within the IRs. Conversely, ξ 2 is large either if δμ IP -IP = (2n + 1)π/2 and the two IRs are very far from equality or if the two IRs are equal but Δμ IP -IP = nπ

On the merging rates of envelope-deprived components of binary systems which can give rise to supernova events

Science.gov (United States)

Tornambe, Amedeo

1989-08-01

Theoretical rates of mergings of envelope-deprived components of binary systems, which can give rise to supernova events are described. The effects of the various assumptions on the physical properties of the progenitor system and of its evolutionary behavior through common envelope phases are discussed. Four cases have been analyzed: CO-CO, He-CO, He-He double degenerate mergings and He star-CO dwarf merging. It is found that, above a critical efficiency of the common envelope action in system shrinkage, the rate of CO-CO mergings is not strongly sensitive to the efficiency. Below this critical value, no CO-CO systems will survive for times larger than a few Gyr. In contrast, He-CO dwarf systems will continue to merge at a reasonable rate up to 20 Gyr, and more, also under extreme conditions.

Design of the large hadron electron collider interaction region

Directory of Open Access Journals (Sweden)

E. Cruz-Alaniz

2015-11-01

Full Text Available The large hadron electron collider (LHeC is a proposed upgrade of the Large Hadron Collider (LHC within the high luminosity LHC (HL-LHC project, to provide electron-nucleon collisions and explore a new regime of energy and luminosity for deep inelastic scattering. The design of an interaction region for any collider is always a challenging task given that the beams are brought into crossing with the smallest beam sizes in a region where there are tight detector constraints. In this case integrating the LHeC into the existing HL-LHC lattice, to allow simultaneous proton-proton and electron-proton collisions, increases the difficulty of the task. A nominal design was presented in the the LHeC conceptual design report in 2012 featuring an optical configuration that focuses one of the proton beams of the LHC to β^{*}=10  cm in the LHeC interaction point to reach the desired luminosity of L=10^{33}  cm^{-2} s^{-1}. This value is achieved with the aid of a new inner triplet of quadrupoles at a distance L^{*}=10  m from the interaction point. However the chromatic beta beating was found intolerable regarding machine protection issues. An advanced chromatic correction scheme was required. This paper explores the feasibility of the extension of a novel optical technique called the achromatic telescopic squeezing scheme and the flexibility of the interaction region design, in order to find the optimal solution that would produce the highest luminosity while controlling the chromaticity, minimizing the synchrotron radiation power and maintaining the dynamic aperture required for stability.

Muon collider interaction region design

Directory of Open Access Journals (Sweden)

Y. I. Alexahin

2011-06-01

Full Text Available Design of a muon collider interaction region (IR presents a number of challenges arising from low β^{*}<1  cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV center-of-mass muon collider IR is presented. It can provide an average luminosity of 10^{34}  cm^{-2} s^{-1} with an adequate protection of magnet and detector components.

“ABBA” REVISITED: MERGING THE HORIZONS OF HISTORY AND ...

African Journals Online (AJOL)

ture of metaphors in terms of their rhetorical functions. The New Rhetoric pro- ... between literal and metaphorical in favour of the merging of another two ho- .... cently in The Dictionary of Classical Hebrew of the Hebrew Bible and the Dead.

Merging Children's Oncology Group Data with an External Administrative Database Using Indirect Patient Identifiers: A Report from the Children's Oncology Group.

Directory of Open Access Journals (Sweden)

Yimei Li

Full Text Available Clinical trials data from National Cancer Institute (NCI-funded cooperative oncology group trials could be enhanced by merging with external data sources. Merging without direct patient identifiers would provide additional patient privacy protections. We sought to develop and validate a matching algorithm that uses only indirect patient identifiers.We merged the data from two Phase III Children's Oncology Group (COG trials for de novo acute myeloid leukemia (AML with the Pediatric Health Information Systems (PHIS. We developed a stepwise matching algorithm that used indirect identifiers including treatment site, gender, birth year, birth month, enrollment year and enrollment month. Results from the stepwise algorithm were compared against the direct merge method that used date of birth, treatment site, and gender. The indirect merge algorithm was developed on AAML0531 and validated on AAML1031.Of 415 patients enrolled on the AAML0531 trial at PHIS centers, we successfully matched 378 (91.1% patients using the indirect stepwise algorithm. Comparison to the direct merge result suggested that 362 (95.7% matches identified by the indirect merge algorithm were concordant with the direct merge result. When validating the indirect stepwise algorithm using the AAML1031 trial, we successfully matched 157 out of 165 patients (95.2% and 150 (95.5% of the indirectly merged matches were concordant with the directly merged matches.These data demonstrate that patients enrolled on COG clinical trials can be successfully merged with PHIS administrative data using a stepwise algorithm based on indirect patient identifiers. The merged data sets can be used as a platform for comparative effectiveness and cost effectiveness studies.

ENHANCED OFF-CENTER STELLAR TIDAL DISRUPTIONS BY SUPERMASSIVE BLACK HOLES IN MERGING GALAXIES

International Nuclear Information System (INIS)

Liu, F. K.; Chen, Xian

2013-01-01

Off-center stellar tidal disruption flares have been suggested to be a powerful probe of recoiling supermassive black holes (SMBHs) out of galactic centers due to anisotropic gravitational wave radiations. However, off-center tidal flares can also be produced by SMBHs in merging galaxies. In this paper, we computed the tidal flare rates by dual SMBHs in two merging galaxies before the SMBHs become self-gravitationally bounded. We employ an analytical model to calculate the tidal loss-cone feeding rates for both SMBHs, taking into account two-body relaxation of stars, tidal perturbations by the companion galaxy, and chaotic stellar orbits in triaxial gravitational potential. We show that for typical SMBHs with masses 10 7 M ☉ , the loss-cone feeding rates are enhanced by mergers up to Γ ∼ 10 –2 yr –1 , about two orders of magnitude higher than those by single SMBHs in isolated galaxies and about four orders of magnitude higher than those by recoiling SMBHs. The enhancements are mainly due to tidal perturbations by the companion galaxy. We suggest that off-center tidal flares are overwhelmed by those from merging galaxies, making the identification of recoiling SMBHs challenging. Based on the calculated rates, we estimate the relative contributions of tidal flare events by single, binary, and dual SMBH systems during cosmic time. Our calculations show that the off-center tidal disruption flares by un-bound SMBHs in merging galaxies contribute a fraction comparable to that by single SMBHs in isolated galaxies. We conclude that off-center tidal disruptions are powerful tracers of the merging history of galaxies and SMBHs.

pp Interaction Regions. [Superconducting super collider

Energy Technology Data Exchange (ETDEWEB)

Diebold, R.; Johnson, D.E.

1984-01-01

This group served as the interface between experimenters and accelerator physicists. A start was made on a portfolio of IR's, building on previous studies including the Reference Designs Study (RDS). The group also looked at limits on time structure and luminosity, the clustering of IR's, external beams of secondary particles from the IR's, and various operational issues connected with the IR's. Designs were developed for interaction regions for RDS-B (individual cryostats for two 5-T rings, separated by 60 cm vertically). For a fixed geometry, the quadrupoles have been tuned over a range to give a factor of 100 variation in ..beta..* (1 to 100 m) and thus in luminosity; an even larger variation may well be possible. Variation of the minimum ..beta..* with free space between the quadrupole triplets, for a quad strength of 280 T/m and under the constraint of fixed chromaticity, showed a factor of five decrease in maximum luminosity in going from a high luminosity region with +-20 m free space to a small-angle region with +-100 m. Similar variants of the RDS-A IR were also found.

A cluster merging method for time series microarray with production values.

Science.gov (United States)

Chira, Camelia; Sedano, Javier; Camara, Monica; Prieto, Carlos; Villar, Jose R; Corchado, Emilio

2014-09-01

A challenging task in time-course microarray data analysis is to cluster genes meaningfully combining the information provided by multiple replicates covering the same key time points. This paper proposes a novel cluster merging method to accomplish this goal obtaining groups with highly correlated genes. The main idea behind the proposed method is to generate a clustering starting from groups created based on individual temporal series (representing different biological replicates measured in the same time points) and merging them by taking into account the frequency by which two genes are assembled together in each clustering. The gene groups at the level of individual time series are generated using several shape-based clustering methods. This study is focused on a real-world time series microarray task with the aim to find co-expressed genes related to the production and growth of a certain bacteria. The shape-based clustering methods used at the level of individual time series rely on identifying similar gene expression patterns over time which, in some models, are further matched to the pattern of production/growth. The proposed cluster merging method is able to produce meaningful gene groups which can be naturally ranked by the level of agreement on the clustering among individual time series. The list of clusters and genes is further sorted based on the information correlation coefficient and new problem-specific relevant measures. Computational experiments and results of the cluster merging method are analyzed from a biological perspective and further compared with the clustering generated based on the mean value of time series and the same shape-based algorithm.

Merged Real Time GNSS Solutions for the READI System

Science.gov (United States)

Santillan, V. M.; Geng, J.

2014-12-01

Real-time measurements from increasingly dense Global Navigational Satellite Systems (GNSS) networks located throughout the western US offer a substantial, albeit largely untapped, contribution towards the mitigation of seismic and other natural hazards. Analyzed continuously in real-time, currently over 600 instruments blanket the San Andreas and Cascadia fault systems of the North American plate boundary and can provide on-the-fly characterization of transient ground displacements highly complementary to traditional seismic strong-motion monitoring. However, the utility of GNSS systems depends on their resolution, and merged solutions of two or more independent estimation strategies have been shown to offer lower scatter and higher resolution. Towards this end, independent real time GNSS solutions produced by Scripps Inst. of Oceanography and Central Washington University (PANGA) are now being formally combined in pursuit of NASA's Real-Time Earthquake Analysis for Disaster Mitigation (READI) positioning goals. CWU produces precise point positioning (PPP) solutions while SIO produces ambiguity resolved PPP solutions (PPP-AR). The PPP-AR solutions have a ~5 mm RMS scatter in the horizontal and ~10mm in the vertical, however PPP-AR solutions can take tens of minutes to re-converge in case of data gaps. The PPP solutions produced by CWU use pre-cleaned data in which biases are estimated as non-integer ambiguities prior to formal positioning with GIPSY 6.2 using a real time stream editor developed at CWU. These solutions show ~20mm RMS scatter in the horizontal and ~50mm RMS scatter in the vertical but re-converge within 2 min. or less following cycle-slips or data outages. We have implemented the formal combination of the CWU and SCRIPPS ENU displacements using the independent solutions as input measurements to a simple 3-element state Kalman filter plus white noise. We are now merging solutions from 90 stations, including 30 in Cascadia, 39 in the Bay Area, and 21

HR competencies at a merged Higher Education Institution

Directory of Open Access Journals (Sweden)

Cecile M. Schultz

2010-06-01

Research purposes: The aim of this study was to determine the HR competencies at a merged higher education institution. Other objectives were to establish the satisfaction of academics, administrative staff and management regarding the HR competencies and the importance thereof. Motivation for the study: Human resource professionals require assistance by providing HR competencies necessary to add value at a merged higher education institution. Research designs, approaches and methods: A quantitative research design was employed as the research strategy. The questionnaire was based on the literature, the business plan and the HR balanced scorecard report. The target population was 1363 permanent staff on one campus and the response rate was 28%. A principal factor analysis, spider charts and box plots were utilised for data analysis. The results indicated business knowledge, HR practices, personal skills and management skills as the vital HR competencies. Practical implications: Staff were not satisfied with the current HR competencies and consequently this necessitated attention to improve the deficient areas. Contribution: This study shows that limited research was done with regard to HR competencies in the South African higher education backdrop.

Interaction study of rice stripe virus proteins reveals a region of the nucleocapsid protein (NP) required for NP self-interaction and nuclear localization.

Science.gov (United States)

Lian, Sen; Cho, Won Kyong; Jo, Yeonhwa; Kim, Sang-Min; Kim, Kook-Hyung

2014-04-01

Rice stripe virus (RSV), which belongs to the genus Tenuivirus, is an emergent virus problem. The RSV genome is composed of four single-strand RNAs (RNA1-RNA4) and encodes seven proteins. We investigated interactions between six of the RSV proteins by yeast-two hybrid (Y2H) assay in vitro and by bimolecular fluorescence complementation (BiFC) in planta. Y2H identified self-interaction of the nucleocapsid protein (NP) and NS3, while BiFC revealed self-interaction of NP, NS3, and NCP. To identify regions(s) and/or crucial amino acid (aa) residues required for NP self-interaction, we generated various truncated and aa substitution mutants. Y2H assay showed that the N-terminal region of NP (aa 1-56) is necessary for NP self-interaction. Further analysis with substitution mutants demonstrated that additional aa residues located at 42-47 affected their interaction with full-length NP. These results indicate that the N-terminal region (aa 1-36 and 42-47) is required for NP self-interaction. BiFC and co-localization studies showed that the region required for NP self-interaction is also required for NP localization at the nucleus. Overall, our results indicate that the N-terminal region (aa 1-47) of the NP is important for NP self-interaction and that six aa residues (42-47) are essential for both NP self-interaction and nuclear localization. Copyright © 2014 Elsevier B.V. All rights reserved.

Cascading Constrained 2-D Arrays using Periodic Merging Arrays

DEFF Research Database (Denmark)

Forchhammer, Søren; Laursen, Torben Vaarby

2003-01-01

We consider a method for designing 2-D constrained codes by cascading finite width arrays using predefined finite width periodic merging arrays. This provides a constructive lower bound on the capacity of the 2-D constrained code. Examples include symmetric RLL and density constrained codes...

Resource Based Multi Agent Plan Merging : Framework and application

NARCIS (Netherlands)

De Weerdt, M.M.; Van der Krogt, R.P.J.; Witteveen, C.

2003-01-01

We discuss a resource-based planning framework where agents are able to merge plans by exchanging resources. In this framework, plans are specified as structured objects composed of resource consuming and resource producing processes (actions). A plan itself can also be conceived as a process

«Resource type» regions in the modern Russian economy

Directory of Open Access Journals (Sweden)

Levin Sergey, N.

2015-06-01

Full Text Available Despite the officially declared intention to form universal rules of the liberal type, development was based on the formation of a "hybrid" institutional environment in the "post-Soviet" transformation of the Russian economy. "Hybrid" institutional environment is characterized, firstly, with the prevalence of forms of interaction between authorities and business that are uncharacteristic for liberal market economy, and their "merging" with each other, secondly, with sustainable regional fragmentation. As a result regional institutional systems, based on different configurations of network linkages between business and authorities, appeared and embedded into unified «power vertical». «Resource type» regions occupy special position in the modern Russian economy. Their economies are based on the export-oriented industries as well as raw resources extracting and mining industries. We distinguish the following discrete structural alternatives of their development in a globalizing economy: "enclave dual economy" and integrated regional economy. The first option is institutionally reinforces the social and economic gap from developed countries. The second one provides diversification and development of regional and national economies. We use comparative characteristic of Kemerovo region and Krasnoyarsk region to carry out analysis of options of "resource type" regions development. We selected indicators and elaborated estimation algorithm to figure out the type of regional economic development.

Particle acceleration during merging-compression plasma start-up in the Mega Amp Spherical Tokamak

Science.gov (United States)

McClements, K. G.; Allen, J. O.; Chapman, S. C.; Dendy, R. O.; Irvine, S. W. A.; Marshall, O.; Robb, D.; Turnyanskiy, M.; Vann, R. G. L.

2018-02-01

Magnetic reconnection occurred during merging-compression plasma start-up in the Mega Amp Spherical Tokamak (MAST), resulting in the prompt acceleration of substantial numbers of ions and electrons to highly suprathermal energies. Accelerated field-aligned ions (deuterons and protons) were detected using a neutral particle analyser at energies up to about 20 keV during merging in early MAST pulses, while nonthermal electrons have been detected indirectly in more recent pulses through microwave bursts. However no increase in soft x-ray emission was observed until later in the merging phase, by which time strong electron heating had been detected through Thomson scattering measurements. A test-particle code CUEBIT is used to model ion acceleration in the presence of an inductive toroidal electric field with a prescribed spatial profile and temporal evolution based on Hall-MHD simulations of the merging process. The simulations yield particle distributions with properties similar to those observed experimentally, including strong field alignment of the fast ions and the acceleration of protons to higher energies than deuterons. Particle-in-cell modelling of a plasma containing a dilute field-aligned suprathermal electron component suggests that at least some of the microwave bursts can be attributed to the anomalous Doppler instability driven by anisotropic fast electrons, which do not produce measurable enhancements in soft x-ray emission either because they are insufficiently energetic or because the nonthermal bremsstrahlung emissivity during this phase of the pulse is below the detection threshold. There is no evidence of runaway electron acceleration during merging, possibly due to the presence of three-dimensional field perturbations.

HTS power leads for the BTEV interaction region

Energy Technology Data Exchange (ETDEWEB)

Feher, S.; Carcagno, R.; Orris, D.; Page, T.; Pischalnikov, Y.; Rabehl, R.; Sylvester, C.; Tartaglia, M.; Tompkins, J.C.; /Fermilab

2005-05-01

A new Interaction Region (IR) for the BTEV experiment was planned to be built at Fermilab. This IR would have required new superconducting quadrupole magnets and many additional power circuits for their operation. The new ''low beta'' quadrupole magnet design was based upon the Fermilab LHC quadrupole design, and would have operated at 9.56 kA in 4.5 K liquid helium. The use of conventional power leads for these circuits would have required substantially more helium for cooling than is available from the cryogenic plant, which is already operating close to its limit. To decrease the heat load and helium cooling demands, the use of HTS power leads was necessary. In developing specifications for HTS leads for the BTEV interaction region, several 6 kA HTS leads produced by American Superconductor Corporation (ASC) have been tested at over-current conditions. Final design requirements were to be based on these test results. This paper summarizes the test results and describes the design requirements for the 9.65 kA HTS power leads.

HTS power leads for the BTEV interaction region

International Nuclear Information System (INIS)

Feher, S.; Carcagno, R.; Orris, D.; Page, T.; Pischalnikov, Y.; Rabehl, R.; Sylvester, C.; Tartaglia, M.; Tompkins, J.C.

2005-01-01

A new Interaction Region (IR) for the BTEV experiment was planned to be built at Fermilab. This IR would have required new superconducting quadrupole magnets and many additional power circuits for their operation. The new ''low beta'' quadrupole magnet design was based upon the Fermilab LHC quadrupole design, and would have operated at 9.56 kA in 4.5 K liquid helium. The use of conventional power leads for these circuits would have required substantially more helium for cooling than is available from the cryogenic plant, which is already operating close to its limit. To decrease the heat load and helium cooling demands, the use of HTS power leads was necessary. In developing specifications for HTS leads for the BTEV interaction region, several 6 kA HTS leads produced by American Superconductor Corporation (ASC) have been tested at over-current conditions. Final design requirements were to be based on these test results. This paper summarizes the test results and describes the design requirements for the 9.65 kA HTS power leads

Plasma shape reconstruction of merging spherical tokamak based on modified CCS method

Science.gov (United States)

Ushiki, Tomohiko; Inomoto, Michiaki; Itagaki, Masafumi; McNamara, Steven

2017-10-01

The merging start-up method is the one of the CS-free start-up schemes that has the advantage of high plasma temperature and density because it involves reconnection heating and compression processes. In order to achieve optimal merging operations, the initial two STs should have identical plasma currents and shapes, and then move symmetrically toward the center of the device with appropriate velocity. Furthermore, from the viewpoint of the compression effect, controlling the plasma major radius is also important. To realize the active feedback control of the plasma currents, the positions, and the shapes of the two initial STs and to optimize the plasma parameters described above, accurate estimation of the plasma boundary shape is highly important. In the present work, the Modified-CCS method is demonstrated to reconstruct the plasma boundary shapes as well as the eddy current profiles in the UTST (The University of Tokyo) and ST40 device (Tokamak Energy Ltd). The present research results demonstrate the effectiveness of the M-CCS method in the reconstruction analyses of ST merging.

InterCUBE: a study into merging action and interaction spaces

NARCIS (Netherlands)

Salem, B.I.; Peeters, H.; Baranauskas, C.; Palanque, P.

2007-01-01

We describe the development of a novel tangible interface we call the InterCUBE, a cube-shaped device with no external buttons or widgets. We study the implications of such a shape in terms of interactions, notably the degrees of freedom available and the manipulations possible. We also explain and

Merging research orientation with professional apprenticeship training through PBL

DEFF Research Database (Denmark)

Willert, Søren

2012-01-01

The paper discusses an ongoing process of merging two university-based teaching traditions. The two traditions are alike in that both share a basic commitment to PBL-related values. Differences refer (as stated in the paper’s title) to one tradition being relatively more research oriented, whereas...

The interaction of counter-rotating strained vortex pairs with a third vortex

International Nuclear Information System (INIS)

Higgins, Keith; Ooi, Andrew; Chong, M S; Ruetten, Markus

2009-01-01

The vortex dynamics caused by the interaction of counter-rotating Burgers vortex pairs with a third Burgers vortex in a straining flow is investigated numerically. These interactions blend vortex merging and cancellation effects, and the aim is to investigate how the third vortex might influence the evolution of the vortex pair. Many different choices of initial conditions for the pair and third vortex exist, so attention is restricted to a class of initial conditions in which the vortex pair initially moves in the general direction of vortex 3, and the distance from vortex 3 to the line of free propagation of the vortex pair is the 'offset' parameter δ. A series of calculations with 0≤δ≤4 reveals three types of intermediate-time vortex dynamics that are called merging, swapping and switching. The evolution of the vortex core separation and core vorticity level diagnostics are used to determine the points of transition from merging to swapping and switching. In the longer term, vortex merging, cancellation and straining reduces the three vortices to a single vortex. Other diagnostics of interest are also monitored, including the spatial distributions of the rate of viscous dissipation and terms contributing to the vorticity transport equation. During the merging phase for the case with δ=0, double-peak and double-trough structures are observed in the dissipation-rate contours. In addition, the diffusion of vorticity dominates the vortex-stretching effect near vortex 1 during its absorbtion by vortex 3. Finally, the dynamics of the three vortices are also examined by computing a co-rotating angular velocity and stream function. A series of peaks in the co-rotating angular velocity is found to be associated with the conservation of angular momentum and interactions with a 'ghost' vortex in the co-rotating stream function.

High resolution radar-rain gauge data merging for urban hydrology: current practice and beyond

Science.gov (United States)

Ochoa Rodriguez, Susana; Wang, Li-Pen; Bailey, Andy; Willems, Patrick; Onof, Christian

2017-04-01

In this work a thorough test is conducted of radar-rain gauge merging techniques at urban scales, under different climatological conditions and rain gauge density scenarios. The aim is to provide guidance regarding the suitability and application of merging methods at urban scales, which is lacking at present. The test is conducted based upon two pilot locations, i.e. the cities of Edinburgh (254 km^2) and Birmingham (431 km^2), for which a total of 96 and 84 tipping bucket rain gauges were respectively available, alongside radar QPEs, dense runoff records and urban drainage models. Three merging techniques, namely Mean Field Bias (MFB) adjustment, kriging with external (KED) and Bayesian (BAY) combination, were selected for testing on grounds of performance and common use. They were initially tested as they were originally formulated and as they are reportedly commonly applied using typically available radar and rain gauge data. Afterwards, they were tested in combination with two special treatments which were identified as having the potential to improve merging applicability for urban hydrology: (1) reduction of temporal sampling errors in radar QPEs through temporal interpolation and (2) singularity-based decomposition of radar QPEs prior to merging. These treatments ultimately aim at improving the consistency between radar and rain gauge records, which has been identified as the chief factor affecting merging performance and is particularly challenging at the fine spatial-temporal resolutions required for urban applications. The main findings of this study are the following: - All merging methods were found to improve the applicability of radar QPEs for urban hydrological applications, but the degree of improvement they provide and the added value of radar information vary for each merging method and are also a function of climatological conditions and rain gauge density scenarios. - Overall, KED displayed the best performance, with BAY being a close second

Simulating merging binary black holes with nearly extremal spins

International Nuclear Information System (INIS)

Lovelace, Geoffrey; Scheel, Mark A.; Szilagyi, Bela

2011-01-01

Astrophysically realistic black holes may have spins that are nearly extremal (i.e., close to 1 in dimensionless units). Numerical simulations of binary black holes are important tools both for calibrating analytical templates for gravitational-wave detection and for exploring the nonlinear dynamics of curved spacetime. However, all previous simulations of binary-black-hole inspiral, merger, and ringdown have been limited by an apparently insurmountable barrier: the merging holes' spins could not exceed 0.93, which is still a long way from the maximum possible value in terms of the physical effects of the spin. In this paper, we surpass this limit for the first time, opening the way to explore numerically the behavior of merging, nearly extremal black holes. Specifically, using an improved initial-data method suitable for binary black holes with nearly extremal spins, we simulate the inspiral (through 12.5 orbits), merger and ringdown of two equal-mass black holes with equal spins of magnitude 0.95 antialigned with the orbital angular momentum.

The Institutional Models of Participants Interaction as Instrument for Regional Development

Directory of Open Access Journals (Sweden)

Bogdan Nataliia M.

2017-11-01

Full Text Available The article is aimed at studying the processes of interaction of participants at the regional level. The necessity of search and development of directions of cooperation of participants in process of realization of tasks of both sectoral and regional development has been proved. A peculiar philosophy of cooperation has been formulated, it has been proved that it should not appear as some legal formality. The objectives of cooperation within in terms its broad understanding have been defined, taking into consideration the conception of classical marketing complex (4P. The basic theories of cooperation have been reviewed, on the basis of analyzing these it has been found that an intensifying precisely the non-economic conditions of cooperation at regional level is necessary, and also that cooperation and interaction in region should be considered with understanding of function of different parties to the discussed forms of cooperation. A characterization of forms of both intra- and inter-sectoral cooperation of the participants, operating at the regional level, has been developed. The importance of the institutional forms of cooperation in relation to the processes of solving common problems of both the sectoral and the regional development has been substantiated.

On the merging rates of envelope-deprived components of binary systems which can give rise to supernova events

International Nuclear Information System (INIS)

Tornambe, Amedo

1989-01-01

We derive theoretical rates of mergings of envelope-deprived components of binary systems, which can give rise to supernova events. The effects of the various assumptions one is forced to make on the physical properties of the progenitor system and of its evolutionary behaviour through common envelope phases are discussed. Four cases have been analysed: CO-CO, He-CO, He-He double degenerate mergings and He star-CO dwarf merging. (author)

High-power heating experiment of spherical tokamaks by use of plasma merging

International Nuclear Information System (INIS)

Ueda, Yoshinobu; Ono, Yasushi

1999-01-01

High-power heating of spherical tokamaks (STs) has been investigated experimentally by use of plasma merging effect. When two STs were coaxially collided, thermal energy of a colliding ST was injected into a target ST during short reconnection time (Alfven time). Though the thermal energy increment increased with decreasing plasma q value, thermal energy loss during the following relaxation, tended to be smaller with increasing q. The produced high-β STs had hallower current profiles and weaker paramagnetic toroidal field than those of single STs. Those heating properties indicate the plasma merging to be a promising initial heating method of ST plasmas. (author)

Conference: Seeing two black holes merge (with gravitational waves!) | 14 September | Uni Dufour

CERN Multimedia

2016-01-01

GW150914: the first direct observation of gravitational waves from the inspiral and merger of two black holes - Conference by Prof. Bruce Allen, Albert Einstein Institute Hannover.   "Seeing two black holes merge (with gravitational waves!)" Uni Dufour - Auditorium U300 Wednesday, 14 September at 7 p.m.   Bruce Allen. (Photo: ©F. Vinken/MPG) Abstract: On 14 September 2015, the advanced LIGO gravitational wave instruments detected the gravitational wave signal emitted as two black holes, about one billion light years away from Earth, made a final few orbits around each other then merged together. This was big news around the world, because scientists have tried to make such observations for more than half a century. Before they merged, the two black holes were about 29 and 36 times as massive as the sun; after the merger was complete, a single black hole about 62 times the sun's mass was left behind. I'll describe what black holes are, how they (...

Estimate-Merge-Technique-based algorithms to track an underwater ...

Indian Academy of Sciences (India)

D V A N Ravi Kumar

2017-07-04

Jul 4, 2017 ... In this paper, two novel methods based on the Estimate Merge Technique ... mentioned advantages of the proposed novel methods is shown by carrying out Monte Carlo simulation in .... equations are converted to sequential equations to make ... estimation error and low convergence time) at feasibly high.

Multi-Instrument Manager Tool for Data Acquisition and Merging of Optical and Electrical Mobility Size Distributions

International Nuclear Information System (INIS)

Tritscher, Torsten; Kykal, Carsten; Bischof, Oliver F; Koched, Amine; Filimundi, Eric; Han, Hee-Siew; Johnson, Tim; Elzey, Sherrie; Avenido, Aaron

2015-01-01

Electrical mobility classification (EC) followed by Condensation Particle Counter (CPC) detection is the technique combined in Scanning Mobility Particle Sizers(SMPS) to retrieve nanoparticle size distributions in the range from 2.5 nm to 1 μm. The detectable size range of SMPS systems can be extended by the addition of an Optical Particle Sizer(OPS) that covers larger sizes from 300 nm to 10 μm. This optical sizing method reports an optical equivalent diameter, which is often different from the electrical mobility diameter measured by the standard SMPS technique. Multi-Instrument Manager (MIM TM ) software developed by TSI incorporates algorithms that facilitate merging SMPS data sets with data based on optical equivalent diameter to compile single, wide-range size distributions. Here we present MIM 2.0, the next-generation of the data merging tool that offers many advanced features for data merging and post-processing. MIM 2.0 allows direct data acquisition with OPS and NanoScan SMPS instruments to retrieve real-time particle size distributions from 10 nm to 10 μm, which we show in a case study at a fireplace. The merged data can be adjusted using one of the merging options, which automatically determines an overall aerosol effective refractive index. As a result an indirect and average characterization of aerosol optical and shape properties is possible. The merging tool allows several pre-settings, data averaging and adjustments, as well as the export of data sets and fitted graphs. MIM 2.0 also features several post-processing options for SMPS data and differences can be visualized in a multi-peak sample over a narrow size range. (paper)

Generation of high harmonic free electron laser with phase-merging effect

Energy Technology Data Exchange (ETDEWEB)

Li, Heting, E-mail: liheting@ustc.edu.cn; Jia, Qika; Zhao, Zhouyu

2017-03-01

An easy-to-implement scheme is proposed to produce the longitudinal electron bunch density modulation with phase-merging phenomenon. In this scheme an electron bunch is firstly transversely dispersed in a modified dogleg to generate the exact dependence of electron energy on the transverse position, then it is modulated in a normal modulator. After travelling through a modified chicane with specially designed transfer matrix elements, the density modulation with phase-merging effect is generated which contains high harmonic components of the seed laser. We present theoretical analysis and numerical simulations for seeded soft x-ray free-electron laser. The results demonstrate that this technique can significantly enhance the frequency up-conversion efficiency and allow a seeded FEL operating at very high harmonics.

Is merging and acquisition profitable?

International Nuclear Information System (INIS)

Skjeret, Frode; Soergard, Lars

2002-01-01

This report deals with mergers and acquisitions in the electricity sector in Norway. The background is the fact that the profitability of these activities proves to be low. In buying, it is typically the selling shareholder who profits from the transaction, while the buying company does not really earn much. This result appears to be a robust result both in different countries, between sectors and independent of methodology. The report provides theoretical justification for merging and buying up and empirical evaluations of the effects of company integration. It is asserted that what can be learned in general from the literature may also occur in the European power sector. Furthermore, the report discusses the challenges faced by the companies if they want to expand through mergers and acquisitions

Tactile interactions activate mirror system regions in the human brain.

Science.gov (United States)

McKyton, Ayelet

2011-12-07

Communicating with others is essential for the development of a society. Although types of communications, such as language and visual gestures, were thoroughly investigated in the past, little research has been done to investigate interactions through touch. To study this we used functional magnetic resonance imaging. Twelve participants were scanned with their eyes covered while stroking four kinds of items, representing different somatosensory stimuli: a human hand, a realistic rubber hand, an object, and a simple texture. Although the human and the rubber hands had the same overall shape, in three regions there was significantly more blood oxygen level dependent activation when touching the real hand: the anterior medial prefrontal cortex, the ventral premotor cortex, and the posterior superior temporal cortex. The last two regions are part of the mirror network and are known to be activated through visual interactions such as gestures. Interestingly, in this study, these areas were activated through a somatosensory interaction. A control experiment was performed to eliminate confounds of temperature, texture, and imagery, suggesting that the activation in these areas was correlated with the touch of a human hand. These results reveal the neuronal network working behind human tactile interactions, and highlight the participation of the mirror system in such functions.

Resource cost results for one-way entanglement distillation and state merging of compound and arbitrarily varying quantum sources

International Nuclear Information System (INIS)

Boche, H.; Janßen, G.

2014-01-01

We consider one-way quantum state merging and entanglement distillation under compound and arbitrarily varying source models. Regarding quantum compound sources, where the source is memoryless, but the source state an unknown member of a certain set of density matrices, we continue investigations begun in the work of Bjelaković et al. [“Universal quantum state merging,” J. Math. Phys. 54, 032204 (2013)] and determine the classical as well as entanglement cost of state merging. We further investigate quantum state merging and entanglement distillation protocols for arbitrarily varying quantum sources (AVQS). In the AVQS model, the source state is assumed to vary in an arbitrary manner for each source output due to environmental fluctuations or adversarial manipulation. We determine the one-way entanglement distillation capacity for AVQS, where we invoke the famous robustification and elimination techniques introduced by Ahlswede. Regarding quantum state merging for AVQS we show by example that the robustification and elimination based approach generally leads to suboptimal entanglement as well as classical communication rates

Merging aeromagnetic data collected at different levels: the GEOMAUD survey

Directory of Open Access Journals (Sweden)

D. Damaske

1999-06-01

Full Text Available As part of the German GEOMAUD-expedition an aeromagnetic survey was carried out in Central Queen Maud Land. The helicopter-borne survey was designed in a conventional form of a regional survey with a spacing of profile-lines of 4.4 km. Due to terrain considerations - surveying from the coast across the mountain ranges to the high altitudes of the polar plateau - the survey was split into two sections flown at different constant levels. Over the coastal part survey elevation was 570 m (above sea level while for the mountain section 2845 m was chosen. Both survey parts were processed separately. The low level section was upward continued before merging with the high level section. Though this leads to a homogeneous magnetic anomaly map, in some applications it may be more advantageous to present the anomalies of the magnetic field in original survey levels as a simple combined map because small scale features are preserved and can be used in recognizing magnetic units and patterns for geological/geophysical interpretation.

Thiazoloisoindigo: a Building Block that Merges the Merits of Thienoisoindigo and Diazaisoindigo for Conjugated Polymers.

Science.gov (United States)

Wan, Xiaobo; Li, Chenchen; Wang, Xiao; Hio-Ieng, Un; Peng, Jiawei; Lan, Zhenggang; Cai, Mian; Pei, Jian; Wang, Jieyu

2018-04-24

Thiazoloisoindigo, a novel structural variation of isoindigo, is for the first time utilized to synthesize conjugated polymers. Polymer based on thiazoloisoindigo merges the advantages of the one based on thienoisoindigo and diazaisoindigo: It not only exhibits a greatly red shifted UV-vis absorption to the near-infrared region due to its strong tendency to form quinoidal structures, similar to that based on thienoisoindigo, but also shows excellent ambipolar mobility (hole 3.93 and electron 1.07 cm2 V-1 s-1, respectively) in organic field-effect transistors (OFETs), superior than that based on diazaisoindigo, showing the strong electron-withdrawing capability of thiazoloisoindigo. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Network Interaction of Universities in Higher Education System of Ural Macro-Region

Directory of Open Access Journals (Sweden)

Garold Efimovich Zborovsky

2017-06-01

Full Text Available The subject-matter of the analysis are the characteristics and forms of cooperation between universities of Ural Federal District on the basis of their typology. The purpose of the article is to substantiate the necessity and possibility of network interaction between universities of the macro-region. We prove the importance and potential effectiveness of universities network interaction in the terms of socio-economic uncertainty of the development of Ural Federal District and its higher education. Networking interaction and multilateral cooperation are considered as a new type of inter-universities relations, which can be activated and intensified by strengthening the relations of universities with stakeholders. The authors examine certain concrete forms and formats of network interaction and cooperation between universities and discuss selected cases of new type of relations. In it, they see the real and potential innovation of higher school nonlinear development processes. The statements of the article allow to confirm the hypothesis about the reality of strengthening the network interaction in macro-region. It can transform higher education in the driver of socio-economic development of Ural Federal District; ensure the competitiveness of higher education of the macro-region in the Russian and global educational space; enhance its role in the society; become one of the most significant elements of nonlinear models of higher education development in the country. The authors’ research is based on the interdisciplinary methodology including the potential of theoretical sociology, sociology of higher education, economic sociology, management theory, regional economics. The results of the study can form the basis for the improvement of the Ural Federal District’s educational policy.

More than the sum of its parts? A merged satellite product from MODIS and AMSR2 sea ice concentration

Science.gov (United States)

Ludwig, V. S.; Istomina, L.; Spreen, G.

2017-12-01

Arctic sea ice concentration (SIC), the fraction of a grid cell that is covered by sea ice, is relevant for a multitude of branches: physics (heat/momentum exchange), chemistry (gas exchange), biology (photosynthesis), navigation (location of pack ice) and others. It has been observed from passive microwave (PMW) radiometers on satellites continuously since 1979, providing an almost 40-year time series. However, the resolution is limited to typically 25 km which is good enough for climate studies but too coarse to properly resolve the ice edge or to show leads. The highest resolution from PMW sensors today is 5 km of the AMSR2 89 GHz channels. Thermal infrared (TIR) and visible (VIS) measurements provide much higher resolutions between 1 km (TIR) and 30 m (VIS, regional daily coverage). The higher resolutions come at the cost of depending on cloud-free fields of view (TIR and VIS) and daylight (VIS). We present a merged product of ASI-AMSR2 SIC (PMW) and MODIS SIC (TIR) at a nominal resolution of 1 km. This product benefits from both the independence of PMW towards cloud coverage and the high resolution of TIR data. An independent validation data set has been produced from manually selected, cloud-free Landsat VIS data at 30 m resolution. This dataset is used to evaluate the performance of the merged SIC dataset. Our results show that the merged product resolves features which are smeared out by the PMW data while benefitting from the PMW data in cloudy cases and is thus indeed more than the sum of its parts.

Distributed Merge Trees

Energy Technology Data Exchange (ETDEWEB)

Morozov, Dmitriy; Weber, Gunther

2013-01-08

Improved simulations and sensors are producing datasets whose increasing complexity exhausts our ability to visualize and comprehend them directly. To cope with this problem, we can detect and extract significant features in the data and use them as the basis for subsequent analysis. Topological methods are valuable in this context because they provide robust and general feature definitions. As the growth of serial computational power has stalled, data analysis is becoming increasingly dependent on massively parallel machines. To satisfy the computational demand created by complex datasets, algorithms need to effectively utilize these computer architectures. The main strength of topological methods, their emphasis on global information, turns into an obstacle during parallelization. We present two approaches to alleviate this problem. We develop a distributed representation of the merge tree that avoids computing the global tree on a single processor and lets us parallelize subsequent queries. To account for the increasing number of cores per processor, we develop a new data structure that lets us take advantage of multiple shared-memory cores to parallelize the work on a single node. Finally, we present experiments that illustrate the strengths of our approach as well as help identify future challenges.

Threshold couplings of phase-conjugate mirrors with two interaction regions.

Science.gov (United States)

Beli, M; Petrovi, M; Sandfuchs, O; Kaiser, F

1998-03-01

Using the grating-action method, we determine the threshold coupling strengths of three generic examples of phase-conjugate mirrors with two interaction regions: the cat conjugator, the mutually incoherent beam coupler, and the interconnected ring mirror.

High-power laser delocalization in plasmas leading to long-range beam merging

Energy Technology Data Exchange (ETDEWEB)

Nakatsutsumi, M; Marques, J R; Antici, P; Bourgeois, N; Romagnani, L; Audebert, P; Fuchs, J [UPMC, CEA, CNRS, LULI, Ecole Polytech, F-91128 Palaiseau (France); Nakatsutsumi, M; Kodama, R [Osaka Univ, Grad Sch Engn, Suita, Osaka 5650871 (Japan); Antici, P [Univ Roma La Sapienza, Dipartimento SBAI, I-00161 Rome (Italy); Feugeas, J L; Nicolai, P [Univ Bordeaux 1, CNRS, CEA, Ctr Lasers Intenses and Applicat, F-33405 Talence (France); Lin, T [Fox Chase Canc Ctr, Philadelphia, PA 19111 (United States)

2010-07-01

Attraction and fusion between co-propagating light beams, mutually coherent or not, can take place in nonlinear media as a result of the beam power modifying the refractive index of the medium. In the context of high-power light beams, induced modifications of the beam patterns could potentially impact many topics, including long-range laser propagation, the study of astrophysical colliding blast waves and inertial confinement fusion. Here, through experiments and simulations, we show that in a fully ionized plasma, which is a nonlinear medium, beam merging can take place for high-power and mutually incoherent beams that are initially separated by several beam diameters. This is in contrast to the usual assumption that this type of interaction is limited to beams separated by only one beam diameter. This effect, which is orders of magnitude more significant than Kerr-like nonlinearity in gases, demonstrates the importance of potential cross-talk amongst multiple beams in plasma. (authors)

ESO's Two Observatories Merge

Science.gov (United States)

2005-02-01

On February 1, 2005, the European Southern Observatory (ESO) has merged its two observatories, La Silla and Paranal, into one. This move will help Europe's prime organisation for astronomy to better manage its many and diverse projects by deploying available resources more efficiently where and when they are needed. The merged observatory will be known as the La Silla Paranal Observatory. Catherine Cesarsky, ESO's Director General, comments the new development: "The merging, which was planned during the past year with the deep involvement of all the staff, has created unified maintenance and engineering (including software, mechanics, electronics and optics) departments across the two sites, further increasing the already very high efficiency of our telescopes. It is my great pleasure to commend the excellent work of Jorge Melnick, former director of the La Silla Observatory, and of Roberto Gilmozzi, the director of Paranal." ESO's headquarters are located in Garching, in the vicinity of Munich (Bavaria, Germany), and this intergovernmental organisation has established itself as a world-leader in astronomy. Created in 1962, ESO is now supported by eleven member states (Belgium, Denmark, Finland, France, Germany, Italy, The Netherlands, Portugal, Sweden, Switzerland, and the United Kingdom). It operates major telescopes on two remote sites, all located in Chile: La Silla, about 600 km north of Santiago and at an altitude of 2400m; Paranal, a 2600m high mountain in the Atacama Desert 120 km south of the coastal city of Antofagasta. Most recently, ESO has started the construction of an observatory at Chajnantor, a 5000m high site, also in the Atacama Desert. La Silla, north of the town of La Serena, has been the bastion of the organization's facilities since 1964. It is the site of two of the most productive 4-m class telescopes in the world, the New Technology Telescope (NTT) - the first major telescope equipped with active optics - and the 3.6-m, which hosts HARPS

Merging the Internet and Hypermedia in the English Language Arts.

Science.gov (United States)

Reed, W. Michael; Wells, John G.

1997-01-01

Discussion of hypermedia and computer-mediated communication focuses on a project that merges a language arts Internet resource with a hypermedia-based knowledge construction approach to learning. Highlights include constructing a HyperCard-based program on Shakespeare's "Hamlet," gophers and search engines, downloading, collaborative…

IMPROVEMENT OF INTERACTION BETWEEN CREDIT INSTITUTIONS AND ENTREPRENEURSHIP ORGANIZATIONS AT REGIONAL LEVEL

Directory of Open Access Journals (Sweden)

A. V. Russavskaya

2011-01-01

Full Text Available Interaction between credit and entrepreneurship organizations aimed at implementation of regional development programs should be improved according to the following main directions: better accessibility to financial resources; broader spectrum of consultancy, particularly business planning related services rendered to the business; more active cooperation with venture funds. Current regional crediting mechanisms are described for Kaluga Region as example.

Merging in-silico and in vitro salivary protein complex partners using the STRING database: A tutorial.

Science.gov (United States)

Crosara, Karla Tonelli Bicalho; Moffa, Eduardo Buozi; Xiao, Yizhi; Siqueira, Walter Luiz

2018-01-16

Protein-protein interaction is a common physiological mechanism for protection and actions of proteins in an organism. The identification and characterization of protein-protein interactions in different organisms is necessary to better understand their physiology and to determine their efficacy. In a previous in vitro study using mass spectrometry, we identified 43 proteins that interact with histatin 1. Six previously documented interactors were confirmed and 37 novel partners were identified. In this tutorial, we aimed to demonstrate the usefulness of the STRING database for studying protein-protein interactions. We used an in-silico approach along with the STRING database (http://string-db.org/) and successfully performed a fast simulation of a novel constructed histatin 1 protein-protein network, including both the previously known and the predicted interactors, along with our newly identified interactors. Our study highlights the advantages and importance of applying bioinformatics tools to merge in-silico tactics with experimental in vitro findings for rapid advancement of our knowledge about protein-protein interactions. Our findings also indicate that bioinformatics tools such as the STRING protein network database can help predict potential interactions between proteins and thus serve as a guide for future steps in our exploration of the Human Interactome. Our study highlights the usefulness of the STRING protein database for studying protein-protein interactions. The STRING database can collect and integrate data about known and predicted protein-protein associations from many organisms, including both direct (physical) and indirect (functional) interactions, in an easy-to-use interface. Copyright © 2017 Elsevier B.V. All rights reserved.

A Merging Algorithm for Aerosol Size Distribution from Multiple Instruments

Czech Academy of Sciences Publication Activity Database

Ondráček, Jakub; Ždímal, Vladimír; Smolík, Jiří; Lazaridis, M.

2009-01-01

Roč. 199, 1-4 (2009), s. 219-233 ISSN 0049-6979 Grant - others:MTKD(XE) CT-2004-513849 Institutional research plan: CEZ:AV0Z40720504 Keywords : aerosols * merging particle size distribution * multilognormal model Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.676, year: 2009

Data merging of infrared and ultrasonic images for plasma facing components inspection

International Nuclear Information System (INIS)

Richou, M.; Durocher, A.; Medrano, M.; Martinez-Ona, R.; Moysan, J.; Riccardi, B.

2009-01-01

For steady-state magnetic thermonuclear fusion devices which need large power exhaust capability, actively cooled plasma facing components have been developed. In order to guarantee the integrity of these components during the required lifetime, their thermal and mechanical behaviour must be assessed. Before the procurement of the ITER Divertor, the examination of the heat sink to armour joints with non-destructive techniques is an essential topic to be addressed. Defects may be localised at different bonding interfaces. In order to improve the defect detection capability of the SATIR technique, the possibility of merging the infrared thermography test data coming from SATIR results with the ultrasonic test data has been identified. The data merging of SATIR and ultrasonic results has been performed on Carbon Fiber Composite (CFC) monoblocks with calibrated defects, identified by their position and extension. These calibrated defects were realised with machining, with 'stop-off' or by a lack of CFC activation techniques, these last two representing more accurately a real defect. A batch of 56 samples was produced to simulate each possibility of combination with regards to interface location, position and extension and way of realising the defect. The use of a data merging method based on Dempster-Shafer theory improves significantly the detection sensibility and reliability of defect location and size.

High-Resolution Imaging of Colliding and Merging Galaxies

Science.gov (United States)

Whitmore, Brad

1991-07-01

We propose to obtain high-resolution images, using the WF/PC, of two colliding and merging galaxies (i.e., NGC 4038/4039 = "The Antennae" and NGC 7252 ="Atoms-for-Peace Galaxy". Our goal is to use HST to make critical observations of each object in order to gain a better understanding of the various phases of the merger process. Our primary objective is to determine whether globular clusters are formed during mergers\\?

HTS Power Leads for the BTeV Interaction Region

CERN Document Server

Feher, Sandor; Orris, Darryl; Pishchalnikov, Yu M; Rabehl, Roger Jon; Sylvester, C D; Tartaglia, M; Tompkins, John

2005-01-01

A new Interaction Region for the BTEV experiment is planned to be built soon at Fermilab. This IR will require new superconducting quadrupole magnets and many additional power circuits for their operation. The new "low beta" quadupole magnet design is based upon the Fermilab LHC quadrupole design, and will operate at 9.56 kA in 4.5 K liquid helium. The use of conventional power leads for these circuits would require substantially more helium for cooling than is available from the cryogenic plant, which is already operating close to its limit. To decrease the heat load and helium cooling demands, the use of HTS power leads is necessary. Fermilab is in the process of procuring HTS leads for this new interaction region. Several 6 kA HTS leads produced by American Superconductor Corporation have been tested at over-current conditions. Based on the test results, design requirements are being developed for procuring the HTS current leads. This paper summarizes the test results and describes the design requirements ...

Evolution and merging of binaries with compact objects

International Nuclear Information System (INIS)

Bethe, Hans A.; Brown, Gerald E.; Lee, Chang-Hwan

2007-01-01

In the light of recent observations in which short γ-ray bursts are interpreted as arising from black-hole(BH), neutron-star(NS) or NS-NS mergings we would like to review our research on the evolution of compact binaries, especially those containing NS's. These were carried out with predictions for LIGO in mind, but are directly applicable to short γ-ray bursts in the interpretation above. Most important in our review is that we show that the standard scenario for evolving NS-NS binaries always ends up with a low-mass BH (LMBH), NS binary. Bethe and Brown [1998, Astrophys. J. 506, 780] showed that this fate could be avoided if the two giants in the progenitor binary burned He at the same time, and that in this way the binary could avoid the common envelope evolution of the NS with red giant companion which sends the first born NS into a BH in the standard scenario. The burning of He at the same time requires, for the more massive giants such as the progenitors of the Hulse-Taylor binary NS that the two giants be within 4% of each other in zero age main sequence (ZAMS) mass. Applying this criterion to all binaries results in a factor ∼5 of LMBH-NS binaries as compared with NS-NS binaries. Although this factor is substantially less than the originally claimed factor of 20 which Bethe and Brown (1998) estimated, largely because a careful evolution has been carried through here, our factor 5 is augmented by a factor of ∼8 arising from the higher rate of star formation in the earlier Galaxy from which the BH-NS binaries came from. Furthermore, here we calculate the mergers for short-hard gamma-ray bursts, whereas Bethe and Brown's factor 20 included a factor of 2 for the higher chirp masses in a BH-NS binary as compared with NS-NS one. In short, we end up with an estimate of factor ∼40 over that calculated with NS-NS binary mergers in our Galaxy alone. Our total rate is estimated to be about one merging of compact objects per year. Our scenario of NS-NS binaries

Improving aerosol interaction with clouds and precipitation in a regional chemical weather modeling system

Science.gov (United States)

Zhou, C.; Zhang, X.; Gong, S.; Wang, Y.; Xue, M.

2016-01-01

A comprehensive aerosol-cloud-precipitation interaction (ACI) scheme has been developed under a China Meteorological Administration (CMA) chemical weather modeling system, GRAPES/CUACE (Global/Regional Assimilation and PrEdiction System, CMA Unified Atmospheric Chemistry Environment). Calculated by a sectional aerosol activation scheme based on the information of size and mass from CUACE and the thermal-dynamic and humid states from the weather model GRAPES at each time step, the cloud condensation nuclei (CCN) are interactively fed online into a two-moment cloud scheme (WRF Double-Moment 6-class scheme - WDM6) and a convective parameterization to drive cloud physics and precipitation formation processes. The modeling system has been applied to study the ACI for January 2013 when several persistent haze-fog events and eight precipitation events occurred.The results show that aerosols that interact with the WDM6 in GRAPES/CUACE obviously increase the total cloud water, liquid water content, and cloud droplet number concentrations, while decreasing the mean diameters of cloud droplets with varying magnitudes of the changes in each case and region. These interactive microphysical properties of clouds improve the calculation of their collection growth rates in some regions and hence the precipitation rate and distributions in the model, showing 24 to 48 % enhancements of threat score for 6 h precipitation in almost all regions. The aerosols that interact with the WDM6 also reduce the regional mean bias of temperature by 3 °C during certain precipitation events, but the monthly means bias is only reduced by about 0.3 °C.

Improving aerosol interaction with clouds and precipitation in a regional chemical weather modeling system

Directory of Open Access Journals (Sweden)

C. Zhou

2016-01-01

Full Text Available A comprehensive aerosol–cloud–precipitation interaction (ACI scheme has been developed under a China Meteorological Administration (CMA chemical weather modeling system, GRAPES/CUACE (Global/Regional Assimilation and PrEdiction System, CMA Unified Atmospheric Chemistry Environment. Calculated by a sectional aerosol activation scheme based on the information of size and mass from CUACE and the thermal-dynamic and humid states from the weather model GRAPES at each time step, the cloud condensation nuclei (CCN are interactively fed online into a two-moment cloud scheme (WRF Double-Moment 6-class scheme – WDM6 and a convective parameterization to drive cloud physics and precipitation formation processes. The modeling system has been applied to study the ACI for January 2013 when several persistent haze-fog events and eight precipitation events occurred.The results show that aerosols that interact with the WDM6 in GRAPES/CUACE obviously increase the total cloud water, liquid water content, and cloud droplet number concentrations, while decreasing the mean diameters of cloud droplets with varying magnitudes of the changes in each case and region. These interactive microphysical properties of clouds improve the calculation of their collection growth rates in some regions and hence the precipitation rate and distributions in the model, showing 24 to 48 % enhancements of threat score for 6 h precipitation in almost all regions. The aerosols that interact with the WDM6 also reduce the regional mean bias of temperature by 3 °C during certain precipitation events, but the monthly means bias is only reduced by about 0.3 °C.

Radiation damage considerations in a high luminosity collider: The interaction region

International Nuclear Information System (INIS)

Lee, D.M.

1992-01-01

The interaction region in a high luminosity collider will be a source of radiation for all components in the vicinity and will place stringent requirements on their design. The major components in the vicinity and will place stingent requirements on their design. The major components in the vicinity of the interaction region are the physics detectors that surround the beam pipe and the focusing quadrupole magnets nearby. We will present the radiation levels in such a physics detector and the power in the forward direction that will be deposited in the forward calorimeters and quad magnets. The implications of the levels on a variety of detector components and electronics will be presented. The calculational techniques and limitation will be reviewed

Preparation of Phased and Merged Safety Analysis Reports for New DOE Nuclear Facilities

International Nuclear Information System (INIS)

BISHOP, G.E.

2000-01-01

The Spent Nuclear Fuels Project (SNFP) is charged with moving to storage 2,100 metric tons of spent nuclear fuel elements left over from plutonium production at DOE'S Hanford site in Washington state. Two new facilities, the Cold Vacuum Drying Facility (CVDF) and the Canister Storage Building (CSB) are in final construction. In order to meet aggressive schedule commitments, the SNFP chose to prepare the safety analysis reports (SAR's) in phases that covered only specific portions of each facility's design as it was built. Each SAR also merged the preliminary and final safety analysis reports into a single SAR, thereby covering all aspects of design, construction, and operation for that portion (phase) of the facility. A policy of ''NRC equivalency'' was also implemented in parallel with this effort, with the goal of achieving a rigor of safety analysis equivalent to that of NRC-licensed fuel processing facilities. DOE Order 5480.23. ''Nuclear Safety Analysis Reports'' allows preparation of both a phased and a merged SAR to accelerate construction schedules. However, project managers must be aware that such acceleration is not guaranteed. Managers considering this approach for their project should be cognizant of numerous obstacles that will be encountered. Merging and phasing SAR's will create new, unique, and unanticipated difficulties which may actually slow construction unless expeditiously and correctly managed. Pitfalls to be avoided and good practices to be implemented in preparing phased and merged SAR's are presented. The value of applying NRC requirements to the DOE safety analysis process is also discussed. As of December, 1999, the SNFP has completed and approved a SAR for the CVDF. Approval of the SAR for the CSB is pending

Merged SAGE II, Ozone_cci and OMPS ozone profile dataset and evaluation of ozone trends in the stratosphere

Directory of Open Access Journals (Sweden)

V. F. Sofieva

2017-10-01

Full Text Available In this paper, we present a merged dataset of ozone profiles from several satellite instruments: SAGE II on ERBS, GOMOS, SCIAMACHY and MIPAS on Envisat, OSIRIS on Odin, ACE-FTS on SCISAT, and OMPS on Suomi-NPP. The merged dataset is created in the framework of the European Space Agency Climate Change Initiative (Ozone_cci with the aim of analyzing stratospheric ozone trends. For the merged dataset, we used the latest versions of the original ozone datasets. The datasets from the individual instruments have been extensively validated and intercompared; only those datasets which are in good agreement, and do not exhibit significant drifts with respect to collocated ground-based observations and with respect to each other, are used for merging. The long-term SAGE–CCI–OMPS dataset is created by computation and merging of deseasonalized anomalies from individual instruments. The merged SAGE–CCI–OMPS dataset consists of deseasonalized anomalies of ozone in 10° latitude bands from 90° S to 90° N and from 10 to 50 km in steps of 1 km covering the period from October 1984 to July 2016. This newly created dataset is used for evaluating ozone trends in the stratosphere through multiple linear regression. Negative ozone trends in the upper stratosphere are observed before 1997 and positive trends are found after 1997. The upper stratospheric trends are statistically significant at midlatitudes and indicate ozone recovery, as expected from the decrease of stratospheric halogens that started in the middle of the 1990s and stratospheric cooling.

2013 NOAA Coastal California TopoBathy Merge Project Digital Elevation Model (DEM)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This project merged recently collected topographic, bathymetric, and acoustic elevation data along the entire California coastline from approximately the 10 meter...

Will the urge to merge continue?

International Nuclear Information System (INIS)

Gobert, W.A.

2001-01-01

A review of oil and gas markets was presented along with mergers and acquisitions activity. The objective of the exercise was to determine if the current trend of mergers within the oil industry will continue. The review of oil and gas markets included a historical look at crude oil and natural gas prices as well as on industry activity as a whole. A series of economic indicator graphs demonstrate that buyers wallets are full, oil and gas prices have beat the estimates, purchase prices have inflated and shareholders continue to sell at a discount. This information has led the author to conclude that the trend to merge will definitely continue. 2 tabs., 18 figs

Beam-scanning system for determination of beam profiles and form factors in merged-beam experiments

International Nuclear Information System (INIS)

Keyser, C.J.; Froelich, H.R.; Mitchell, J.B.A.; McGowan, J.W.

1979-01-01

A beam-scanning system for a merged electron-ion beam experiment is described. This system is used to determine the horizontal and vertical beam profiles and the form factors at three different locations along the axis of the beams. Design details of the wedge-shaped scanners and the electronic circuit for obtaining beam profiles and form factors are described. The form factor derivation for merged beams is given and an expression in terms of measured quantities is derived. (author)

Machine constraints for experiments in an intermediate luminosity interaction region

International Nuclear Information System (INIS)

Groom, D.

1989-05-01

We summarize existing information about the luminosity as a function of clear space between the interaction point and the front of the final-focus triplet, and about the minimum beam pipe dimensions (stay-clear dimensions) in the region. 7 refs., 4 figs., 1 tab

Merging of independent condensates: disentangling the Kibble-Zurek mechanism

Science.gov (United States)

Ville, Jean-Loup; Aidelsburger, Monika; Saint-Jalm, Raphael; Nascimbene, Sylvain; Beugnon, Jerome; Dalibard, Jean

2017-04-01

An important step in the study of out-of-equilibrium physics is the Kibble-Zurek theory which describes a system after a quench through a second-order phase transition. This was studied in our group with a temperature quench across the normal-to-superfluid phase transition in an annular trap geometry, inducing the formation of supercurrents. Their magnitude and direction were detected by measuring spiral patterns resulting from the interference of the ring-shaped condensate with a central reference disk. According to the KZ mechanism domains of phase are created during the quench, with a characteristic size depending of its duration. In our case this results in a stochastic formation of supercurrents depending on the relative phases of the domains. As a next step of this study, we now design ourselves the patches thanks to our tunable trapping potential. We control both the number of condensates to be merged (from one to twelve) and their merging time. We report an increase of the vorticity in the ring for an increased number of patches compatible with a random phase model. We further investigate the time required by the phase to homogenize between two condensates.

Characteristics of merging at the magnetopause inferred from dayside 557.7-nm all-sky images: IMF drivers of poleward moving auroral forms

Directory of Open Access Journals (Sweden)

N. C. Maynard

2006-11-01

Full Text Available We combine in situ measurements from Cluster with high-resolution 557.7 nm all-sky images from South Pole to investigate the spatial and temporal evolution of merging on the dayside magnetopause. Variations of 557.7 nm emissions were observed at a 6 s cadence at South Pole on 29 April 2003 while significant changes in the Interplanetary Magnetic Field (IMF clock angle were reaching the magnetopause. Electrons energized at merging sites are the probable sources for 557.7 nm cusp emissions. At the same time Cluster was crossing the pre-noon cusp in the Northern Hemisphere. The combined observations confirm results of a previous study that merging events can occur at multiple sites simultaneously and vary asynchronously on time scales of 10 s to 3 min (Maynard et al., 2004. The intensity of the emissions and the merging rate appear to vary with changes in the IMF clock angle, IMF BX and the dynamic pressure of the solar wind. Most poleward moving auroral forms (PMAFs reflect responses to changes in interplanetary medium rather than to local processes. The changes in magnetopause position required by increases in dynamic pressure are mediated by merging and result in the generation of PMAFs. Small (15–20% variations in dynamic pressure of the solar wind are sufficient to launch PMAFs. Changes in IMF BX create magnetic flux compressions and rarefactions in the solar wind. Increases (decreases in IMF BX strengthens |B| near northern (southern hemisphere merging sites thereby enhancing merging rates and triggering PMAFs. When correlating responses in the two hemispheres, the presence of significant IMF BX also requires that different lag-times be applied to ACE measurements acquired ~0.1 AU upstream of Earth. Cluster observations set lag times for merging at Northern Hemisphere sites; post-noon optical emissions set times of Southern Hemisphere merging. All-sky images and magnetohydrodynamic simulations indicate that merging occurs in multiple

BNFL/Siemens to merge?

International Nuclear Information System (INIS)

Anon.

1997-01-01

Negotiations are being conducted on the creation of a joint venture between British Nuclear Fuels Limited (BNFL) and the German company Siemens. The venture would merge Siemens' nuclear fuel, engineering and construction services businesses with BNFL's Magnox and AGR fuel fabrication business which is based at Springfields in Lancashire. It would incorporate Siemens' share of Nuclear Power International, a joint venture with the French company Framatone which is developing the European Pressurised Water Reactor project, and its US subsidiary Siemens' Power Corp. BNFL's mixed oxide (MOX) fuel fabrication business, its stake in the Dutch-German-UK uranium enrichment company Urenco and its nuclear waste reprocessing business would not be involved. There is already speculation that Siemens' greater input will lead to it taking a majority stake in what will be the world's second largest nuclear fuel manufacturer. Reaction to the news is reported. This has been muted in the United Kingdom, mixed in Germany and adverse in France because of the implications for the Siemens' Framatone collaboration. (UK)

Mining MaNGA for Merging Galaxies: A New Imaging and Kinematic Technique from Hydrodynamical Simulations

Science.gov (United States)

Nevin, Becky; Comerford, Julia M.; Blecha, Laura

2018-06-01

Merging galaxies play a key role in galaxy evolution, and progress in our understanding of galaxy evolution is slowed by the difficulty of making accurate galaxy merger identifications. Mergers are typically identified using imaging alone, which has its limitations and biases. With the growing popularity of integral field spectroscopy (IFS), it is now possible to use kinematic signatures to improve galaxy merger identifications. I use GADGET-3 hydrodynamical simulations of merging galaxies with the radiative transfer code SUNRISE, the later of which enables me to apply the same analysis to simulations and observations. From the simulated galaxies, I have developed the first merging galaxy classification scheme that is based on kinematics and imaging. Utilizing a Linear Discriminant Analysis tool, I have determined which kinematic and imaging predictors are most useful for identifying mergers of various merger parameters (such as orientation, mass ratio, gas fraction, and merger stage). I will discuss the strengths and limitations of the classification technique and then my initial results for applying the classification to the >10,000 observed galaxies in the MaNGA (Mapping Nearby Galaxies at Apache Point) IFS survey. Through accurate identification of merging galaxies in the MaNGA survey, I will advance our understanding of supermassive black hole growth in galaxy mergers and other open questions related to galaxy evolution.

Aerosol-Cloud Interactions and Cloud Microphysical Properties in the Asir Region of Saudi Arabia

Science.gov (United States)

Kucera, P. A.; Axisa, D.; Burger, R. P.; Li, R.; Collins, D. R.; Freney, E. J.; Buseck, P. R.

2009-12-01

In recent advertent and inadvertent weather modification studies, a considerable effort has been made to understand the impact of varying aerosol properties and concentration on cloud properties. Significant uncertainties exist with aerosol-cloud interactions for which complex microphysical processes link the aerosol and cloud properties. Under almost all environmental conditions, increased aerosol concentrations within polluted air masses will enhance cloud droplet concentration relative to that in unperturbed regions. The interaction between dust particles and clouds are significant, yet the conditions in which dust particles become cloud condensation nuclei (CCN) are uncertain. In order to quantify this aerosol effect on clouds and precipitation, a field campaign was launched in the Asir region, located adjacent to the Red Sea in the southwest region of Saudi Arabia. Ground measurements of aerosol size distributions, hygroscopic growth factors, CCN concentrations as well as aircraft measurements of cloud hydrometeor size distributions were observed in the Asir region in August 2009. The presentation will include a summary of the analysis and results with a focus on aerosol-cloud interactions and cloud microphysical properties observed during the convective season in the Asir region.

Data merging of infrared and ultrasonic images for plasma facing components inspection

Energy Technology Data Exchange (ETDEWEB)

Richou, M. [CEA, IRFM, F-13108 Saint Paul-lez-Durance (France)], E-mail: marianne.richou@cea.fr; Durocher, A. [CEA, IRFM, F-13108 Saint Paul-lez-Durance (France); Medrano, M. [Association EURATOM - CIEMAT, Avda. Complutense 22, 28040 Madrid (Spain); Martinez-Ona, R. [Tecnatom, 28703 S. Sebastian de los Reyes, Madrid (Spain); Moysan, J. [LCND, Universite de la Mediterranee, F-13625 Aix-en-Provence (France); Riccardi, B. [Fusion For Energy, 08019 Barcelona (Spain)

2009-06-15

For steady-state magnetic thermonuclear fusion devices which need large power exhaust capability, actively cooled plasma facing components have been developed. In order to guarantee the integrity of these components during the required lifetime, their thermal and mechanical behaviour must be assessed. Before the procurement of the ITER Divertor, the examination of the heat sink to armour joints with non-destructive techniques is an essential topic to be addressed. Defects may be localised at different bonding interfaces. In order to improve the defect detection capability of the SATIR technique, the possibility of merging the infrared thermography test data coming from SATIR results with the ultrasonic test data has been identified. The data merging of SATIR and ultrasonic results has been performed on Carbon Fiber Composite (CFC) monoblocks with calibrated defects, identified by their position and extension. These calibrated defects were realised with machining, with 'stop-off' or by a lack of CFC activation techniques, these last two representing more accurately a real defect. A batch of 56 samples was produced to simulate each possibility of combination with regards to interface location, position and extension and way of realising the defect. The use of a data merging method based on Dempster-Shafer theory improves significantly the detection sensibility and reliability of defect location and size.

Merging Library and Computing Services at Kenyon College: A Progress Report.

Science.gov (United States)

Oden, Robert A., Jr.; Temple, Daniel B.; Cottrell, Janet R.; Griggs, Ronald K.; Turney, Glen W.; Wojcik, Frank M.

2001-01-01

Describes the evolution and progress toward a uniquely integrated library and computer services unit at Kenyon College. Discusses its focus on constituencies; merging of the divisions; benefits for students, faculty, administrative units, and the institution; meeting challenges; and generalizing from the model. (EV)

People, soil and manioc interactions in the upper Amazon region

NARCIS (Netherlands)

Peña Venegas, C.P.

2015-01-01

Abstract

Clara Patricia Peña Venegas (2015). People, soil and manioc interactions in the upper Amazon region. PhD thesis, Wageningen University, The Netherlands, with summaries in English and Dutch, 210 pp.

The presence of anthropogenic soils, or Amazonian Dark