WorldWideScience

Sample records for mergansers mergus serrator

  1. Migratory patterns and population structure among breeding and wintering red-breasted mergansers (Mergus serrator) and common mergansers (M. merganser)

    Pearce, J.M.; McCracken, K.G.; Christensen, Thomas K.; Zhuravlev, Y.N.

    2009-01-01

    Philopatry has long been assumed to structure populations of waterfowl and other species of birds genetically, especially via maternally transmitted mitochondrial DNA (mtDNA), yet other migratory behaviors and nesting ecology (use of ground vs. cavity sites) may also contribute to population genetic structure. We investigated the effects of migration and nesting ecology on the population genetic structure of two Holarctic waterfowl, the Red-breasted Merganser (Mergus serrator) and Common Merganser (M. merganser), using mtDNA control-region sequence data. Red-breasted Mergansers (a ground-nesting species) exhibited lower levels of population differentiation across their North American range, possibly as a result of post-Pleistocene range expansion and population growth. By contrast, Common Mergansers (a cavity-nesting species) breeding in western and eastern North America were strongly differentiated, as were continental groups in North America and Europe. Our hypothesis that population differentiation of breeding female Common Mergansers results from limited migration during non-breeding periods was not supported, in that equally heterogeneous mtDNA lineages were observed in males and females on several wintering areas. The interspecific differences in mtDNA patterns for these two closely related species may have resulted from factors related to nesting ecology (ground vs. cavity nesting) and responses to historical climate change.

  2. Fall diets of red-breasted merganser (Mergus serrator) and walleye (Sander vitreus) in Sandusky Bay and adjacent waters of western Lake Erie

    Bur, M.T.; Stapanian, M.A.; Bernhardt, G.; Turner, M.W.

    2008-01-01

    Although published studies indicate the contrary, there is concern among many sport anglers that migrating red-breasted mergansers (Mergus serrator) and other waterbirds pose a competitive threat to sport fish species such as walleye (Sander vitreus) in Lake Erie. We quantified the diet of autumn-migrant mergansers and walleye during 1998-2000 in Sandusky Bay and adjacent waters of western Lake Erie. We hypothesized that the diets of both predators would be similar in species composition, but because of different foraging ecologies their diets would differ markedly in size of prey consumed. In addition to predator samples, we used trawl data from the same general area as an index of prey availability. We found that mergansers fed almost exclusively on fish (nine species). Gizzard shad (Dorosoma cepedianum), emerald shiner (Notropis atherinoides) and round goby (Neogobius melanostomus) were consumed in the greatest numbers, most frequently and comprised the greatest biomass. Walleye fed exclusively on fish: gizzard shad, alewife (Alosa psuedoharengus) and emerald shiner were consumed in the greatest numbers, most frequently and comprised the greatest biomass. Diet overlap between mergansers and walleye was 67% by weight and 66% by species frequency. Mean total lengths of gizzard shad, emerald shiner and round goby found in walleye stomachs exceeded those captured in trawls by 47%, on average. Mean total lengths of gizzard shad, emerald shiner and round goby were greater in walleye stomachs than in merganser stomachs. Mean total lengths of emerald shiner and round goby were less in merganser stomachs than in trawls. Our results suggest that although the diets of walleye and mergansers overlapped considerably, mergansers generally consumed smaller fish than walleye. Given the abundance and diversity of prey species available, and the transient nature of mergansers on Lake Erie during migration, we conclude that competition for food between these species is minimal.

  3. Comparative mitochondrial genetics of North American and Eurasian mergansers with an emphasis on the endangered scaly-sided merganser (Mergus squamatus)

    Solovyeva, Diana V.; Pearce, John M.

    2011-01-01

    The scaly-sided merganser, Mergus squamatus, is considered one of the most threatened sea duck species in the Palearctic with limited breeding and wintering distribution in China and Russia. To provide information for future conservation efforts, we sequenced a portion of the mitochondrial (mt) DNA control region in four species of mergansers and three additional sea duck taxa to characterize the evolutionary history of the scaly-sided merganser, infer population trends that may have led to its limited geographic distribution, and to compare indices of genetic diversity among species of mergansers. Scaly-sided mergansers exhibit substantially lower levels of mtDNA genetic diversity (h = 0.292, π = 0.0007) than other closely related sea ducks and many other avian taxa. The four haplotypes observed differed by a single base pair suggesting that the species has not experienced a recent population decline but has instead been at a low population level for some time. A phylogenetic analysis placed the scaly-sided merganser basal to North American and European forms of the common merganser, M. merganser. Our inclusion of a small number of male samples doubled the number of mtDNA haplotypes observed, suggesting that additional genetic variation likely exists within the global population if there is immigration of males from unsampled breeding areas.

  4. Gravel bars can be critical for biodiversity conservation: a case study on scaly-sided Merganser in South china.

    Qing Zeng

    Full Text Available Gravel bars are characteristic components of river landscapes and are increasingly recognized as key sites for many waterbirds, though detailed studies on the ecological function of gravel bars for waterbirds are rare. In this study, we surveyed the endangered Scaly-sided Merganser Mergus squamatus along a 40 km river section of Yuan River, in Central China, for three consecutive winters. We derived the landscape metrics of river gravel bars from geo-rectified fine resolution (0.6 m aerial image data. We then built habitat suitability models (Generalized Linear Models-GLMs to study the effects of landscape metrics and human disturbance on Scaly-sided Merganser presence probability. We found that 1 the Scaly-sided Merganser tended to congregate at river segments with more gravel patches; 2 the Scaly-sided Merganser preferred areas with larger and more contiguous gravel patches; and 3 the number of houses along the river bank (a proxy for anthropogenic disturbance had significantly negative impacts on the occurrence of the Scaly-sided Merganser. Our results suggest that gravel bars are vital to the Scaly-sided Merganser as shelters from disturbance, as well as sites for feeding and roosting. Therefore, maintaining the exposure of gravel bars in regulated rivers during the low water period in winter might be the key for the conservation of the endangered species. These findings have important implications for understanding behavioral evolution and distribution of the species and for delineating between habitats of different quality for conservation and management.

  5. Mechanisms of population heterogeneity among molting common mergansers on Kodiak Island, Alaska: Implications for genetic assessments of migratory connectivity

    Pearce, John M.; Zwiefelhofer, Denny; Maryanski, Nate

    2009-01-01

    Quantifying population genetic heterogeneity within nonbreeding aggregations can inform our understanding of patterns of site fidelity, migratory connectivity, and gene flow between breeding and nonbreeding areas. However, characterizing mechanisms that contribute to heterogeneity, such as migration and dispersal, is required before site fidelity and migratory connectivity can be assessed accurately. We studied nonbreeding groups of Common Mergansers (Mergus merganser) molting on Kodiak Island, Alaska, from 2005 to 2007, using banding data to assess rates of recapture, mitochondrial (mt) DNA to determine natal area, and nuclear microsatellite genotypes to assess dispersal. Using baseline information from differentiated mtDNA haplogroups across North America, we were able to assign individuals to natal regions and document population genetic heterogeneity within and among molting groups. Band-recovery and DNA data suggest that both migration from and dispersal among natal areas contribute to admixed groups of males molting on Kodiak Island. A lack of differentiation in the Common Merganser's nuclear, bi-parentally inherited DNA, observed across North America, implies that dispersal can mislead genetic assessments of migratory connectivity and assignments of nonbreeding individuals to breeding areas. Thus multiple and independent data types are required to account for such behaviors before accurate assessments of migratory connectivity can be made.

  6. Introducing MERGANSER: A Flexible Framework for Ecological Niche Modeling

    Klawonn, M.; Dow, E. M.

    2015-12-01

    Ecological Niche Modeling (ENM) is a collection of techniques to find a "fundamental niche", the range of environmental conditions suitable for a species' survival in the absence of inter-species interactions, given a set of environmental parameters. Traditional approaches to ENM face a number of obstacles including limited data accessibility, data management problems, computational costs, interface usability, and model validation. The MERGANSER system, which stands for Modeling Ecological Residency Given A Normalized Set of Environmental Records, addresses these issues through powerful data persistence and flexible data access, coupled with a clear presentation of results and fine-tuned control over model parameters. MERGANSER leverages data measuring 72 weather related phenomena, land cover, soil type, population, species occurrence, general species information, and elevation, totaling over 1.5 TB of data. To the best of the authors' knowledge, MERGANSER uses higher-resolution spatial data sets than previously published models. Since MERGANSER stores data in an instance of Apache SOLR, layers generated in support of niche models are accessible to users via simplified Apache Lucene queries. This is made even simpler via an HTTP front end that generates Lucene queries automatically. Specifically, a user need only enter the name of a place and a species to run a model. Using this approach to synthesizing model layers, the MERGANSER system has successfully reproduced previously published niche model results with a simplified user experience. Input layers for the model are generated dynamically using OpenStreetMap and SOLR's spatial search functionality. Models are then run using either user-specified or automatically determined parameters after normalizing them into a common grid. Finally, results are visualized in the web interface, which allows for quick validation. Model results and all surrounding metadata are also accessible to the user for further study.

  7. Hooded mergansers swim in the waters of KSC

    1999-01-01

    A male and two female hooded mergansers swim in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male displays its distinctive fan-shaped, black-bordered crest. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  8. A female hooded merganser swims in the waters of KSC

    1999-01-01

    A female hooded merganser swims solo in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The male is distinguished by a fan-shaped, black-bordered crest and striped breast. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  9. A male hooded merganser swims in the waters of KSC

    1999-01-01

    The distinctive fan-shaped, black-bordered crest and striped breast identify this hooded merganser, swimming in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  10. A merganser swims in the waters of KSC

    1999-01-01

    A young female red-breasted merganser swims in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000- acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  11. Sessile serrated adenoma (SSA) vs. traditional serrated adenoma (TSA).

    Torlakovic, Emina Emilia; Gomez, Jose D; Driman, David K; Parfitt, Jeremy R; Wang, Chang; Benerjee, Tama; Snover, Dale C

    2008-01-01

    The morphologic distinction between various serrated polyps of the colorectum may be challenging. The distinction between sessile serrated adenoma (SSA) and traditional serrated adenoma (TSA) may be difficult using currently available criteria mostly based on cytologic characteristics. We have evaluated 66 serrated polyps including 29 SSA, 18 TSA, and 19 hyperplastic polyps for overall shape of the polyps, architectural features of individual crypts, the presence of eosinophilic cytoplasm, size and distribution of the proliferation and maturation zones, as well as Ki-67 and CK20 expression. The extent of the expression of CK20 and Ki-67 could not distinguish between the 3 types of serrated polyps, but the distribution of their expression was very helpful and differences were statistically significant. The distribution of Ki-67+ cells was the single most helpful distinguishing feature of the serrated polyp type (PTSA had low Ki-67 expression, which was limited to "ectopic crypts" and admixed tubular adenomalike areas. In serrated polyps, ectopic crypt formation (ECF) defined by the presence of ectopic crypts with their bases not seated adjacent to the muscularis mucosae was nearly exclusive to TSA and was found in all cases, while the presence of cytologic atypia and eosinophilia of the cytoplasm were characteristic, but not limited to TSA. No evidence of ECF, but nevertheless abnormal distribution of proliferation zone was characteristic of SSA, whereas HP had neither. The presence of the ECF defines TSA in a more rigorous fashion than previous diagnostic criteria and also explains the biologic basis of exuberant protuberant growth associated with TSA and the lack of such growth in SSA. Recognition of this phenomenon may also help in exploring the genetic and molecular basis for differences between SSA and TSA, because these architectural abnormalities may well be a reflection of abnormalities in genetically programmed mucosal development.

  12. Serrated adenoma of stomach: A premalignancy?

    Divya Achutha Ail

    2015-01-01

    Full Text Available Serrated adenoma is a newly described entity in the group of gastric adenomas. Until date only 20 cases of gastric serrated adenoma have been reported. It is an important entity to be diagnosed accurately as it has a very high-risk of malignant transformation, especially those located in the cardia of stomach. Serrated adenoma associated with adenocarcinoma is more frequent in the elderly, but pure serrated adenoma is common in the young, in whom follow-up is mandatory. Gastric serrated adenoma has distinct location, definite histomorphology and characteristic Ki-67 immunohistochemical staining. Ki-67 staining helps to differentiated pure serrated adenoma from those associated with adenocarcinoma. We present a young adult male, incidentally detected to have gastric serrated adenoma.

  13. Damage caused by Tetranychus Merganser Bondreaux (Acari: Tetranychidae on Nopal Verdura Opuntia Ficus-Indica (L. Miller during winter

    J. Lima-Espíndola

    2017-09-01

    Full Text Available The spider mite Tetranychus merganser occurs in some crops in Mexico and USA. This mite could be considered a potential pest in countries like Japan. In this work we recorded the damages that T. merganser causes to the nopal verdura (prickly pear vegetable crop in one of the principal cactus crop regions of Mexico.

  14. MERGANSER: an empirical model to predict fish and loon mercury in New England lakes.

    Shanley, James B; Moore, Richard; Smith, Richard A; Miller, Eric K; Simcox, Alison; Kamman, Neil; Nacci, Diane; Robinson, Keith; Johnston, John M; Hughes, Melissa M; Johnston, Craig; Evers, David; Williams, Kate; Graham, John; King, Susannah

    2012-04-17

    MERGANSER (MERcury Geo-spatial AssessmeNtS for the New England Region) is an empirical least-squares multiple regression model using mercury (Hg) deposition and readily obtainable lake and watershed features to predict fish (fillet) and common loon (blood) Hg in New England lakes. We modeled lakes larger than 8 ha (4404 lakes), using 3470 fish (12 species) and 253 loon Hg concentrations from 420 lakes. MERGANSER predictor variables included Hg deposition, watershed alkalinity, percent wetlands, percent forest canopy, percent agriculture, drainage area, population density, mean annual air temperature, and watershed slope. The model returns fish or loon Hg for user-entered species and fish length. MERGANSER explained 63% of the variance in fish and loon Hg concentrations. MERGANSER predicted that 32-cm smallmouth bass had a median Hg concentration of 0.53 μg g(-1) (root-mean-square error 0.27 μg g(-1)) and exceeded EPA's recommended fish Hg criterion of 0.3 μg g(-1) in 90% of New England lakes. Common loon had a median Hg concentration of 1.07 μg g(-1) and was in the moderate or higher risk category of >1 μg g(-1) Hg in 58% of New England lakes. MERGANSER can be applied to target fish advisories to specific unmonitored lakes, and for scenario evaluation, such as the effect of changes in Hg deposition, land use, or warmer climate on fish and loon mercury.

  15. Porous Anodic Aluminum Oxide with Serrated Nanochannels

    Li, Dongdong; Zhao, Liang; Lu, Jia G.

    2010-03-01

    Self-assembled nanoporous anodic aluminum oxide (AAO) membrane with straight channels has long been an important tool in synthesizing highly ordered and vertically aligned quasi-1D nanostructures for various applications. Recently shape-selective nanomaterials have been achieved using AAO as a template. It is envisioned that nanowires with multi-branches will significantly increase the active functional sites for applications as sensors, catalysts, chemical cells, etc. Here AAO membranes with serrated nanochannels have been successfully fabricated via a two-step annodization method. The serrated channels with periodic intervals are aligned at an angle of ˜25^circ along the stem channels. The formation of the serrated channels is attributed to the evolution of oxygen gas bubbles and the resulted plastic deformation in oxide membrane. In order to reveal the inside channel structure, Platinum are electrodeposited into the AAO template. The as-synthesized serrated Pt nanowires demonstrate a superior electrocatalytic activity. This is attributed to the enhanced electric field strength around serrated tips as shown in the electric field simulation by COMOSL. Moreover, hierarchical serrated/straight hybrid structures can be constructed using this simple and novel self assembly technique.

  16. Hyper-Methylated Loci Persisting from Sessile Serrated Polyps to Serrated Cancers.

    Andrew, Angeline S; Baron, John A; Butterly, Lynn F; Suriawinata, Arief A; Tsongalis, Gregory J; Robinson, Christina M; Amos, Christopher I

    2017-03-02

    Although serrated polyps were historically considered to pose little risk, it is now understood that progression down the serrated pathway could account for as many as 15%-35% of colorectal cancers. The sessile serrated adenoma/polyp (SSA/P) is the most prevalent pre-invasive serrated lesion. Our objective was to identify the CpG loci that are persistently hyper-methylated during serrated carcinogenesis, from the early SSA/P lesion through the later cancer phases of neoplasia development. We queried the loci hyper-methylated in serrated cancers within our rightsided SSA/Ps from the New Hampshire Colonoscopy Registry, using the Illumina Infinium Human Methylation 450 k panel to comprehensively assess the DNA methylation status. We identified CpG loci and regions consistently hyper-methylated throughout the serrated carcinogenesis spectrum, in both our SSA/P specimens and in serrated cancers. Hyper-methylated CpG loci included the known the tumor suppressor gene RET (p = 5.72 x 10-10), as well as loci in differentially methylated regions for GSG1L, MIR4493, NTNG1, MCIDAS, ZNF568, and RERG. The hyper-methylated loci that we identified help characterize the biology of SSA/P development, and could be useful as therapeutic targets, or for future identification of patients who may benefit from shorter surveillance intervals.

  17. Cyclooxygenase-2 overexpression is common in serrated and non-serrated colorectal adenoma, but uncommon in hyperplastic polyp and sessile serrated polyp/adenoma

    Kirkner Gregory J

    2008-01-01

    Full Text Available Abstract Background Cyclooxygenase-2 (COX-2, PTGS2 plays an important role in colorectal carcinogenesis. COX-2 overexpression in colorectal cancer is inversely associated with microsatellite instability (MSI and the CpG island methylator phenotype (CIMP. Evidence suggests that MSI/CIMP+ colorectal cancer may arise through the serrated tumorigenic pathway through various forms of serrated neoplasias. Therefore, we hypothesized that COX-2 may play a less important role in the serrated pathway. Methods By immunohistochemistry, we assessed COX-2 expression in 24 hyperplastic polyps, 7 sessile serrated polyp/adenomas (SSA, 5 mixed polyps with SSA and adenoma, 27 traditional serrated adenomas, 515 non-serrated adenomas (tubular adenoma, tubulovillous adenoma and villous adenoma, 33 adenomas with intramucosal carcinomas, 96 adenocarcinomas with serration (corkscrew gland and 111 adenocarcinomas without serration. Results Strong (2+ COX-2 overexpression was more common in non-serrated adenomas (28% = 143/515 than in hyperplastic polyps (4.2% = 1/24, p = 0.008 and serrated polyps (7 SSAs and 5 mixed polyps (0% = 0/12, p = 0.04. Furthermore, any (1+/2+ COX-2 overexpression was more frequent in non-serrated adenomas (60% = 307/515 than in hyperplastic polyps (13% = 3/24, p Conclusion COX-2 overexpression is infrequent in hyperplastic polyp, SSA and mixed polyp with SSA and adenoma, compared to non-serrated and serrated adenoma. COX-2 overexpression becomes more frequent as tumors progress to higher grade neoplasias. Our observations suggest that COX-2 may play a less significant role in the serrated pathway of tumorigenesis; however, COX-2 may still play a role in later stage of the serrated pathway.

  18. MERGANSER - An Empirical Model to Predict Fish and Loon Mercury in New England Lakes

    MERGANSER (MERcury Geo-spatial AssessmeNtS for the New England Region) is an empirical least-squares multiple regression model using mercury (Hg) deposition and readily obtainable lake and watershed features to predict fish (fillet) and common loon (blood) Hg in New England lakes...

  19. MERGANSER - A Predictive Model of Mercury in Fish and Loons in New England Lakes

    Moore, R. B.; Shanley, J. B.; Smith, R. A.; Miller, E. K.; Simcox, A.; Kamman, N. C.; Nacci, D. E.; Robinson, K. W.; Johnston, J. M.; Hughes, M.; Johnston, C. M.; Williams, K.; Graham, J.; King, S.

    2010-12-01

    MERGANSER (MERcury Geo-spatial AssessmeNtS for the New England Region) is an empirical least squares multiple regression model using atmospheric deposition of mercury (Hg) and readily obtainable lake and watershed features to predict fish and common loon Hg in New England lakes. We modeled lakes larger than 8 ha and with drainage area completely within the USA (4404 lakes), using 3827 fish (12 species) and loon Hg values from 420 lakes. MERGANSER predictor variables included Hg deposition, watershed alkalinity, percent wetlands, percent forest canopy, percent agriculture, drainage area, population, mean annual temperature and watershed slope. The model returns fish tissue or loon blood Hg for user-entered species and length. MERGANSER explained 63% of the variance in fish fillet and loon Hg concentrations. MERGANSER predicted that 32-cm small mouth bass had a median Hg concentration of 0.53 µg g-1 and exceeded EPA’s maximum contaminant level (MCL) of 0.3 µg/g Hg in 90% of New England lakes. Common loon had a median Hg concentration of 1.07 µg g-1 and was in the moderate or higher risk category of >1 µg/g Hg in 58% of New England lakes.

  20. Morphological Variations of Leading-Edge Serrations in Owls (Strigiformes.

    Matthias Weger

    Full Text Available Owls have developed serrations, comb-like structures, along the leading edge of their wings. Serrations were investigated from a morphological and a mechanical point of view, but were not yet quantitatively compared for different species. Such a comparative investigation of serrations from species of different sizes and activity patterns may provide new information about the function of the serrations.Serrations on complete wings and on tenth primary remiges of seven owl species were investigated. Small, middle-sized, and large owl species were investigated as well as species being more active during the day and owls being more active during the night. Serrations occurred at the outer parts of the wings, predominantly at tenth primary remiges, but also on further wing feathers in most species. Serration tips were oriented away from the feather rachis so that they faced into the air stream during flight. The serrations of nocturnal owl species were higher developed as demonstrated by a larger inclination angle (the angle between the base of the barb and the rachis, a larger tip displacement angle (the angle between the tip of the serration and the base of the serration and a longer length. Putting the measured data into a clustering algorithm yielded dendrograms that suggested a strong influence of activity pattern, but only a weak influence of size on the development of the serrations.Serrations are supposed to be involved in noise reduction during flight and also depend on the aerodynamic properties that in turn depend on body size. Since especially nocturnal owls have to rely on hearing during prey capture, the more pronounced serrations of nocturnal species lend further support to the notion that serrations have an important function in noise reduction. The differences in shape of the serrations investigated indicate that a silent flight requires well-developed serrations.

  1. Morphological Variations of Leading-Edge Serrations in Owls (Strigiformes)

    Weger, Matthias; Wagner, Hermann

    2016-01-01

    Background Owls have developed serrations, comb-like structures, along the leading edge of their wings. Serrations were investigated from a morphological and a mechanical point of view, but were not yet quantitatively compared for different species. Such a comparative investigation of serrations from species of different sizes and activity patterns may provide new information about the function of the serrations. Results Serrations on complete wings and on tenth primary remiges of seven owl species were investigated. Small, middle-sized, and large owl species were investigated as well as species being more active during the day and owls being more active during the night. Serrations occurred at the outer parts of the wings, predominantly at tenth primary remiges, but also on further wing feathers in most species. Serration tips were oriented away from the feather rachis so that they faced into the air stream during flight. The serrations of nocturnal owl species were higher developed as demonstrated by a larger inclination angle (the angle between the base of the barb and the rachis), a larger tip displacement angle (the angle between the tip of the serration and the base of the serration) and a longer length. Putting the measured data into a clustering algorithm yielded dendrograms that suggested a strong influence of activity pattern, but only a weak influence of size on the development of the serrations. Conclusions Serrations are supposed to be involved in noise reduction during flight and also depend on the aerodynamic properties that in turn depend on body size. Since especially nocturnal owls have to rely on hearing during prey capture, the more pronounced serrations of nocturnal species lend further support to the notion that serrations have an important function in noise reduction. The differences in shape of the serrations investigated indicate that a silent flight requires well-developed serrations. PMID:26934104

  2. LES tests on airfoil trailing edge serration

    Zhu, Wei Jun; Shen, Wen Zhong

    2016-01-01

    In the present study, a large number of acoustic simulations are carried out for a low noise airfoil with different Trailing Edge Serrations (TES). The Ffowcs Williams-Hawkings (FWH) acoustic analogy is used for noise prediction at trailing edge. The acoustic solver is running on the platform...

  3. Use of geolocators reveals previously unknown Chinese and Korean scaly-sided merganser wintering sites

    Soloveyva, Diana; Afanasiev, Vsevolod; Fox, James W.

    2012-01-01

    areas in successive years, suggesting winter fidelity to catchments if not specific sites. A single female from the adjacent Avvakumovka catchment wintered on saltwater in Korea, at least 1300 km east of Chinese wintering birds. Most sea duck species (Tribe Mergini) form pairs away from breeding areas......, suggesting that this high level of winter dispersal amongst close-nesting females is a potential mechanism to maintain gene flow in this threatened species that has specialist habitat requirements. Hence, female scaly-sided mergansers disperse widely from breeding areas, but show fidelity to nesting areas...

  4. Investigation of Fastening Performance of Subminiature Serrated Bolt

    Jang, Myung Guen; Jeong, Jin Hwan; Jang, Yeon Hui; Kim, Hee Cheol; Kim, Jong-Bong [Seoul Nat’l Univ. of Science & Tech, Seoul (Korea, Republic of)

    2017-04-15

    As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

  5. Investigation of Fastening Performance of Subminiature Serrated Bolt

    Jang, Myung Guen; Jeong, Jin Hwan; Jang, Yeon Hui; Kim, Hee Cheol; Kim, Jong-Bong

    2017-01-01

    As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

  6. Using species distribution model to estimate the wintering population size of the endangered scaly-sided merganser in China.

    Qing Zeng

    Full Text Available Scaly-sided Merganser is a globally endangered species restricted to eastern Asia. Estimating its population is difficult and considerable gap exists between populations at its breeding grounds and wintering sites. In this study, we built a species distribution model (SDM using Maxent with presence-only data to predict the potential wintering habitat for Scaly-sided Merganser in China. Area under the receiver operating characteristic curve (AUC method suggests high predictive power of the model (training and testing AUC were 0.97 and 0.96 respectively. The most significant environmental variables included annual mean temperature, mean temperature of coldest quarter, minimum temperature of coldest month and precipitation of driest quarter. Suitable conditions for Scaly-sided Merganser are predicted in the middle and lower reaches of the Yangtze River, especially in Jiangxi, Hunan and Hubei Provinces. The predicted suitable habitat embraces 6,984 km of river. Based on survey results from three consecutive winters (2010-2012 and previous studies, we estimated that the entire wintering population of Scaly-sided Merganser in China to be 3,561 ± 478 individuals, which is consistent with estimate in its breeding ground.

  7. A comparative study of development and demographic parameters of Tetranychus merganser and Tetranychus kanzawai (Acari: Tetranychidae) at different temperatures

    Ullah, M. S.; Moriya, D.; Badii, M.H.

    2011-01-01

    We investigated the effect of temperature on development and demographic parameters such as the intrinsic rate of natural increase (rm) of the two spider mite species Tetranychus merganser Boudreaux and T. kanzawai Kishida at eleven constant temperatures ranging from 15 to 40C at intervals of 2.5...

  8. Colorectal Adenocarcinoma with an Alternative Serrated Pathway

    Makoto Eizuka

    2018-04-01

    Full Text Available In a 64-year-old woman, we identified a flat, elevated lesion that was located at the caecum and was composed of 3 different areas (areas A, B, and C. We diagnosed it as “carcinoma with sessile serrated adenoma/polyp (SSA/P” histologically. Although area A was diagnosed as classical SSA/P, area B was regarded as a high-grade SSA/P. In contrast, area C showed a differentiated-type adenocarcinoma that invaded the submucosa. The patient had a recurrence of cancer 1.5 years after endoscopic resection. Overexpression of TP53 was detected in area C. Although BRAF mutation was detected in all areas, CpG island methylator phenotype-high cancer was found only in area C. The genomic phenotype of the cancerous tissue was classified as microsatellite stable (MLH1 gene not methylated. In the present case, we showed that a lesion with genetic alterations based on the histological sequence SSA/P → high-grade SSA/P → cancer in SSA/P and an alternative serrated pathway may exhibit aggressive behavior.

  9. Serrated Polyposis: An Enigmatic Model of Colorectal Cancer Predisposition

    Christophe Rosty

    2011-01-01

    Full Text Available Serrated polyposis has only recently been accepted as a condition which carries an increased personal and familial risk of colorectal cancer. Described over four decades ago, it remains one of the most underrecognized and poorly understood of all the intestinal polyposes. With a variety of phenotypic presentations, it is likely that serrated polyposis represents a group of diseases rather than a single entity. Further, neoplastic progression in serrated polyposis may be associated with premature aging in the normal mucosa, typified by widespread gene promoter hypermethylation. From this epigenetically altered field, arise diverse polyps and cancers which show a range of molecular features. Despite a high serrated polyp count, only one-third of colorectal cancers demonstrate a BRAF V600E mutation, the molecular hallmark of the canonical serrated pathway, suggesting that though multiple serrated polyps act as a marker of an abnormal mucosa, the majority of CRC in these patients arise within lesions other than BRAF-mutated serrated polyps.

  10. The mechanism of critical strain and serration type of the serrated flow in Mg–Nd–Zn alloy

    Wang, W.H. [The Group of Magnesium Alloys and Their Applications, Institute of Metal Research Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); School of Materials Science and Engineering, Shenyang Ligong University, 6 Nanpingzhong Road, Shenyang 110159 (China); Wu, D., E-mail: dwu@imr.ac.cn [The Group of Magnesium Alloys and Their Applications, Institute of Metal Research Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Shah, S.S.A. [The Group of Magnesium Alloys and Their Applications, Institute of Metal Research Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Chen, R.S., E-mail: rschen@imr.ac.cn [The Group of Magnesium Alloys and Their Applications, Institute of Metal Research Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Lou, C.S. [School of Materials Science and Engineering, Shenyang Ligong University, 6 Nanpingzhong Road, Shenyang 110159 (China)

    2016-01-01

    In present research the serrated flow has been observed successfully after a critical amount of strain. Two relationships between the critical strain and temperature i.e. normal and inverse, corresponding to each serration type were studied. In order to investigate systematically the onset of serrated flow and serration type in NZ31 alloy, samples in solutionized condition were tensile tested at the temperature ranging from 100 °C to 300 °C with the strain rate ranging from 1×10{sup −4} s{sup −1} to 1×10{sup −2} s{sup −1}. Results showed that normal critical strain appeared with type A and B serrated flow at temperature from 150°C to 250 °C, and inverse critical strain appeared with type C at temperature from 275 °C to 300 °C. Through analyzing the mechanism of three serration types, we found that the production of serration required improvement in diffusion for solute atoms for pinning process at low temperature, and enhance the moving ability of dislocations for unpinning process at high temperature, which need the assistance of the strain and stress respectively. So, in this work, the critical strain for pinning and the critical stress for unpinning processes were defined, which give a better explanation to the variation tendency of two definitions in accordance with temperature. Furthermore, this relationship results in the critical strain for onset of serrated flow changing from normal to inverse and corresponding different serrations.

  11. Mechanism of serrated flow in binary Al-Li alloys

    Kumar, S.; Pink, E. [Austrian Academy of Sciences, Leoben (Austria). Erich-Schmid-Inst. of Solid State Physics; Krol, J. [Polish Academy of Sciences, Krakow (Poland). Alexander-Krupkowski-Inst. of Metallurgy and Materials Science

    1996-09-15

    The work on serrated flow in Al-Li alloys has given rise to a controversy--whether serrations in these alloys are caused by lithium atoms in solid solution or by {delta}{prime}(Al{sub 3}Li)-precipitates. This controversy calls for further work to clarify the mechanism of serrated flow in the Al-Li alloys. Kumar and McShane have shown that in an Al-2.5Li-2Mg-0.14Zr alloy, non-shearable {delta}{prime}-precipitates, which are obtained in the under-aged and peak-aged conditions, might directly initiate serrated flow. However, the latter result was ambiguous because of the presence of other alloying elements, and the need to work on a binary Al-Li alloy was emphasized. The present work discusses the results from the binary Al-Li alloys.

  12. Traditional serrated adenoma (TSA): morphological questions, queries and quandaries.

    Chetty, Runjan

    2016-01-01

    Traditional serrated adenoma (TSA) is an uncommon type of serrated adenoma that can be a precursor to biologically aggressive colorectal cancer that invokes the serrated (accelerated) pathway. The purpose of this review is to address some of the more contentious issues around nomenclature, diagnostic criteria, histological variants, coexistence with other polyp types, the occurrence of dysplasia and the differential diagnosis. While the vast majority of TSAs are exophytic villiform polyps composed of deeply eosinophilic cells, flat top luminal serrations and numerous ectopic crypt foci, histological variants include flat TSA, filiform TSA and one composed of large numbers of mucin-containing cells. It is unlikely that there is any biological difference between the histological variants. There is a contention that TSAs are not dysplastic ab initio and that the majority do not show cytological atypia. Two types of dysplasia are associated with TSA. Serrated dysplasia is less well recognised and less commonly encountered than adenomatous dysplasia. TSA with dysplasia must be separated from TSA with coexisting conventional adenoma. TSA is a characteristic polyp that may be extremely exophytic, flat or composed of mucin-rich cells and is typified by numerous ectopic crypt foci. They may coexist with other serrated polyps and conventional adenomas. Approximately 20-25% will be accompanied by adenomatous dysplasia. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  13. Shark teeth as edged weapons: serrated teeth of three species of selachians.

    Moyer, Joshua K; Bemis, William E

    2017-02-01

    Prior to European contact, South Pacific islanders used serrated shark teeth as components of tools and weapons. They did this because serrated shark teeth are remarkably effective at slicing through soft tissues. To understand more about the forms and functions of serrated shark teeth, we examined the morphology and histology of tooth serrations in three species: the Tiger Shark (Galeocerdo cuvier), Blue Shark (Prionace glauca), and White Shark (Carcharodon carcharias). We show that there are two basic types of serrations. A primary serration consists of three layers of enameloid with underlying dentine filling the serration's base. All three species studied have primary serrations, although the dentine component differs (orthodentine in Tiger and Blue Sharks; osteodentine in the White Shark). Smaller secondary serrations are found in the Tiger Shark, formed solely by enameloid with no contribution from underlying dentine. Secondary serrations are effectively "serrations within serrations" that allow teeth to cut at different scales. We propose that the cutting edges of Tiger Shark teeth, equipped with serrations at different scales, are linked to a diet that includes large, hard-shelled prey (e.g., sea turtles) as well as smaller, softer prey such as fishes. We discuss other aspects of serration form and function by making analogies to man-made cutting implements, such as knives and saws. Copyright © 2016 Elsevier GmbH. All rights reserved.

  14. LES tests on airfoil trailing edge serration

    Zhu, Wei Jun; Shen, Wen Zhong

    2016-01-01

    In the present study, a large number of acoustic simulations are carried out for a low noise airfoil with different Trailing Edge Serrations (TES). The Ffowcs Williams-Hawkings (FWH) acoustic analogy is used for noise prediction at trailing edge. The acoustic solver is running on the platform of our in-house incompressible flow solver EllipSys3D. The flow solution is first obtained from the Large Eddy Simulation (LES), the acoustic part is then carried out based on the instantaneous hydrodynamic pressure and velocity field. To obtain the time history data of sound pressure, the flow quantities are integrated around the airfoil surface through the FWH approach. For all the simulations, the chord based Reynolds number is around 1.5x10 6 . In the test matrix, the effects from angle of attack, the TE flap angle, the length/width of the TES are investigated. Even though the airfoil under investigation is already optimized for low noise emission, most numerical simulations and wind tunnel experiments show that the noise level is further decreased by adding the TES device. (paper)

  15. Colorectal cancer diagnosis in 2012: A new focus for CRC prevention--more serration, less inflammation

    East, James E.; Dekker, Evelien

    2013-01-01

    Knowledge of colorectal cancer (CRC) risks has been rebalanced in 2012. The 'serrated pathway' to CRC, exemplified by serrated polyposis syndrome, emphasizes the importance of serrated lesions. The dogma that patients with IBD are at high risk of CRC, however, might be overstated; optimizing CRC

  16. Numerical simulation of airfoil trailing edge serration noise

    Zhu, Wei Jun; Shen, Wen Zhong

    In the present work, numerical simulations are carried out for a low noise airfoil with and without serrated Trailing Edge. The Ffowcs Williams-Hawkings acoustic analogy is implemented into the in-house incompressible flow solver EllipSys3D. The instantaneous hydrodynamic pressure and velocity...... field are obtained using Large Eddy Simulation. To obtain the time history data of sound pressure, the flow quantities are integrated around the airfoil surface through the FW-H approach. The extended length of the serration is about 16.7% of the airfoil chord and the geometric angle of the serration...... is 28 degrees. The chord based Reynolds number is around 1.5x106. Simulations are compared with existing wind tunnel experiments at various angles of attack. Even though the airfoil under investigation is already optimized for low noise emission, numerical simulations and wind tunnel experiments show...

  17. Gene Signature in Sessile Serrated Polyps Identifies Colon Cancer Subtype

    Kanth, Priyanka; Bronner, Mary P.; Boucher, Kenneth M.; Burt, Randall W.; Neklason, Deborah W.; Hagedorn, Curt H.; Delker, Don A.

    2016-01-01

    Sessile serrated colon adenoma/polyps (SSA/Ps) are found during routine screening colonoscopy and may account for 20–30% of colon cancers. However, differentiating SSA/Ps from hyperplastic polyps (HP) with little risk of cancer is challenging and complementary molecular markers are needed. Additionally, the molecular mechanisms of colon cancer development from SSA/Ps are poorly understood. RNA sequencing was performed on 21 SSA/Ps, 10 HPs, 10 adenomas, 21 uninvolved colon and 20 control colon specimens. Differential expression and leave-one-out cross validation methods were used to define a unique gene signature of SSA/Ps. Our SSA/P gene signature was evaluated in colon cancer RNA-Seq data from The Cancer Genome Atlas (TCGA) to identify a subtype of colon cancers that may develop from SSA/Ps. A total of 1422 differentially expressed genes were found in SSA/Ps relative to controls. Serrated polyposis syndrome (n=12) and sporadic SSA/Ps (n=9) exhibited almost complete (96%) gene overlap. A 51-gene panel in SSA/P showed similar expression in a subset of TCGA colon cancers with high microsatellite instability (MSI-H). A smaller seven-gene panel showed high sensitivity and specificity in identifying BRAF mutant, CpG island methylator phenotype high (CIMP-H) and MLH1 silenced colon cancers. We describe a unique gene signature in SSA/Ps that identifies a subset of colon cancers likely to develop through the serrated pathway. These gene panels may be utilized for improved differentiation of SSA/Ps from HPs and provide insights into novel molecular pathways altered in colon cancer arising from the serrated pathway. PMID:27026680

  18. The role of APC in WNT pathway activation in serrated neoplasia.

    Borowsky, Jennifer; Dumenil, Troy; Bettington, Mark; Pearson, Sally-Ann; Bond, Catherine; Fennell, Lochlan; Liu, Cheng; McKeone, Diane; Rosty, Christophe; Brown, Ian; Walker, Neal; Leggett, Barbara; Whitehall, Vicki

    2018-03-01

    Conventional adenomas are initiated by APC gene mutation that activates the WNT signal. Serrated neoplasia is commonly initiated by BRAF or KRAS mutation. WNT pathway activation may also occur, however, to what extent this is owing to APC mutation is unknown. We examined aberrant nuclear β-catenin immunolocalization as a surrogate for WNT pathway activation and analyzed the entire APC gene coding sequence in serrated and conventional pathway polyps and cancers. WNT pathway activation was a common event in conventional pathway lesions with aberrant nuclear immunolocalization of β-catenin and truncating APC mutations in 90% and 89% of conventional adenomas and 82% and 70% of BRAF wild-type cancers, respectively. WNT pathway activation was seen to a lesser extent in serrated pathway lesions. It occurred at the transition to dysplasia in serrated polyps with a significant increase in nuclear β-catenin labeling from sessile serrated adenomas (10%) to sessile serrated adenomas with dysplasia (55%) and traditional serrated adenomas (9%) to traditional serrated adenomas with dysplasia (39%) (P=0.0001). However, unlike the conventional pathway, truncating APC mutations were rare in the serrated pathway lesions especially sessile serrated adenomas even when dysplastic (15%) and in the BRAF mutant cancers with microsatellite instability that arise from them (8%). In contrast, APC missense mutations that were rare in conventional pathway adenomas and cancers (3% in BRAF wild-type cancers) were more frequent in BRAF mutant cancers with microsatellite instability (32%). We conclude that increased WNT signaling is important in the transition to malignancy in the serrated pathway but that APC mutation is less common and the spectrum of mutations is different than in conventional colorectal carcinogenesis. Moderate impact APC mutations and non-APC-related causes of increased WNT signaling may have a more important role in serrated neoplasia than the truncating APC mutations

  19. Characterization of serrated yielding in service exposed Inconel 625 alloy

    Chatterjee, Arnomitra; Sharma, Garima; Chakravartty, J.K.

    2016-01-01

    The Alloy-625 is an austentic alloy which is being used for a variety of components in the aerospace, marine, chemical and nuclear industries. Tensile tests have been carried out on service exposed Inconel 625 ammonia cracker tube used at heavy water production plant to study the effect of microstructure on the mechanical properties of the material. Owing to temperature gradient during in service condition the microstructure was different in top (T), middle (M) and bottom (B) sections of the tube. The stress-strain curve obtained from conventional tensile test was found to exhibit serrated yielding with in an intermediate temperature regime of 250-600 °C. Both normal and inverse Portevin-Le Chatelier (PLC) effect could be identified at lower and higher temperature regime respectively. The normal behavior was associated with type (A+B) serrations and interstitial atom C was held responsible for the aging of dislocations in this region. On the contrary, the serrations were of type C in nature in inverse PLC regime and were attributed to the locking of dislocations by substitutional Mo atoms. Further analyses of activation energy and transition temperature for normal to inverse PLC dynamics, supported with Transmission Electron Microscopy (TEM) observation revealed that the basic deformation mechanism was different in M and B samples than that in the T samples. While the deformation in T samples were achieved by usual dislocation migration, in M and B samples it was through the propagation of stacking faults in large γ” precipitates. The transition temperature from normal to inverse PLC dynamics also varied appreciably in T samples than that of the M and B ones which could be explained in terms of the delayed depletion of Mo solutes in solution for T samples. (author)

  20. Serrate, hyperplastiske – og hyperplasilignende,kolorektale polypper

    Brunbjerg Folker, Mille; Bernstein, Inge Thomsen; Holck, Susanne

    2006-01-01

    The colorectal hyperplastic polyp has generally been considered a finding of no clinical significance. Recent research has, however, called attention to the existence of some variants of hyperplastic polyp which are potentially malignant. The term "advanced serrated polyp" has been coined...... regarding the optimal management of such patients has not been obtained, but if the polyp is sizeable and located in the right colon, control should be considered. The small, usually left-sided traditional polyp as a rule needs no follow-up, but the context in which such a lesion is found and its morphology...

  1. Serrated leaf mutant in mungbean (Vigna radiata (L) Wilczek)

    Malik, I.A.; Ghulam, Sarwar; Yousaf, Ali; Saleem, M.

    1988-01-01

    Dry dormant seeds of mungbean (Vigna radiata (L) Wilczek) were treated with gamma rays (15, 30 and 60 kR). The serrated leaf mutation was noticed in M 2 of cultivar Pak 32 treated with 60 kR. Cf 14 plants, 3 showed the altered leaf structure and the others were normal. The feature of this mutant was the deep serration of leaflet margins. The mutant had large thick leaflets with prominent venation. The mutant bred true in the M 3 and successive generation. Details of the morphological characteristics of the mutant are presented. The mutant exhibited slower growth particularly during the early stages of development, flowered later and attained shorter height. There was an increase in the number of pods, in seed weight and in seed protein content, but number of seed per pod was considerably reduced. The seed coat colour showed a change from green to yellowish green. In the mutant's flowers the stamina were placed much below the stigma level and the stigma sometimes protruded the corolla. Outcrossing of 4% recorded in some of the mutant lines revealed a reduced cleistogamy. The low number of seeds per pod in the mutant could be due to reduced pollen fertility. The mutant behaved as monogenic recessive. The symbols SL/sl are proposed for this allelic pair. The mutant may have use as a green manure crop because of its large foliage and for the breeders as a genetic marker

  2. Optimization of the poro-serrated trailing edges for airfoil broadband noise reduction.

    Chong, Tze Pei; Dubois, Elisa

    2016-08-01

    This paper reports an aeroacoustic investigation of a NACA0012 airfoil with a number of poro-serrated trailing edge devices that contain porous materials of various air flow resistances at the gaps between adjacent members of the serrated-sawtooth trailing edge. The main objective of this work is to determine whether multiple-mechanisms on the broadband noise reduction can co-exist on a poro-serrated trailing edge. When the sawtooth gaps are filled with porous material of low-flow resistivity, the vortex shedding tone at low-frequency could not be completely suppressed at high-velocity, but a reasonably good broadband noise reduction can be achieved at high-frequency. When the sawtooth gaps are filled with porous material of very high-flow resistivity, no vortex shedding tone is present, but the serration effect on the broadband noise reduction becomes less effective. An optimal choice of the flow resistivity for a poro-serrated configuration has been identified, where it can surpass the conventional serrated trailing edge of the same geometry by achieving a further 1.5 dB reduction in the broadband noise while completely suppressing the vortex shedding tone. A weakened turbulent boundary layer noise scattering at the poro-serrated trailing edge is reflected by the lower-turbulence intensity at the near wake centreline across the whole spanwise wavelength of the sawtooth.

  3. British Society of Gastroenterology position statement on serrated polyps in the colon and rectum.

    East, James E; Atkin, Wendy S; Bateman, Adrian C; Clark, Susan K; Dolwani, Sunil; Ket, Shara N; Leedham, Simon J; Phull, Perminder S; Rutter, Matt D; Shepherd, Neil A; Tomlinson, Ian; Rees, Colin J

    2017-07-01

    Serrated polyps have been recognised in the last decade as important premalignant lesions accounting for between 15% and 30% of colorectal cancers. There is therefore a clinical need for guidance on how to manage these lesions; however, the evidence base is limited. A working group was commission by the British Society of Gastroenterology (BSG) Endoscopy section to review the available evidence and develop a position statement to provide clinical guidance until the evidence becomes available to support a formal guideline. The scope of the position statement was wide-ranging and included: evidence that serrated lesions have premalignant potential; detection and resection of serrated lesions; surveillance strategies after detection of serrated lesions; special situations-serrated polyposis syndrome (including surgery) and serrated lesions in colitis; education, audit and benchmarks and research questions. Statements on these issues were proposed where the evidence was deemed sufficient, and re-evaluated modified via a Delphi process until >80% agreement was reached. The Grading of Recommendations, Assessment, Development and Evaluations (GRADE) tool was used to assess the strength of evidence and strength of recommendation for finalised statements. Key recommendation : we suggest that until further evidence on the efficacy or otherwise of surveillance are published, patients with sessile serrated lesions (SSLs) that appear associated with a higher risk of future neoplasia or colorectal cancer (SSLs ≥10 mm or serrated lesions harbouring dysplasia including traditional serrated adenomas) should be offered a one-off colonoscopic surveillance examination at 3 years ( weak recommendation, low quality evidence, 90% agreement ). Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  4. A novel serrated columnar phased array ultrasonic transducer

    Zou, Cheng; Sun, Zhenguo; Cai, Dong; Song, Hongwei; Chen, Qiang

    2016-02-01

    Traditionally, wedges are required to generate transverse waves in a solid specimen and mechanical rotation device is needed for interrogation of a specimen with a hollow bore, such as high speed railway locomotive axles, turbine rotors, etc. In order to eliminate the mechanical rotation process, a novel array pattern of phased array ultrasonic transducers named as serrated columnar phased array ultrasonic transducer (SCPAUT) is designed. The elementary transducers are planar rectangular, located on the outside surface of a cylinder. This layout is aimed to generate electrically rotating transverse waveforms so as to inspect the longitudinal cracks on the outside surface of a specimen which has a hollow bore at the center, such as the high speed railway locomotive axles. The general geometry of the SCPAUT and the inspection system are illustrated. A FEM model and mockup experiment has been carried out. The experiment results are in good agreement with the FEM simulation results.

  5. [Serrated polyps and their association with synchronous advanced colorectal neoplasia].

    Urman, Jesús; Gomez, Marta; Basterra, Marta; Mercado, María Del Rosario; Montes, Marta; Gómez Dorronsoro, Marisa; Garaigorta, Maitane; Fraile, María; Rubio, Eva; Aisa, Gregorio; Galbete, Arkaitz

    2016-11-01

    Large serrated polyps (SP), proximal SP, SP with dysplasia and the presence of multiple sessile serrated adenomas/polyps (SSA/P), which we refer to as SP with increased risk of metachronous lesions (SPIRML), have been associated with an increased risk of advanced colon lesions on follow-up. It is unclear, however, whether SPIRML are also associated with an increased risk of synchronous advanced colorectal neoplasia (ACN). The aim of this study was to estimate the prevalence of SPIRML and to evaluate the association between SPIRML and synchronous ACN. A cross-sectional population-based study in all patients (1,538) with histological diagnosis of SP obtained from colonoscopies, sigmoidoscopies and colonic surgery performed in Navarra Health Service hospitals (Spain) in 2011. Demographic parameters and synchronous colonic lesions (adenomas, advanced adenomas [AA] and ACN) were analyzed. One fourth of the sample (384 patients) presented SPIRML. These were older patients, with a slight predominance of women, and with no differences in body mass index (BMI) compared to patients without SPIRML. In the univariate analysis, patients with SPIRML showed an increased risk of adenoma, AA and ACN. In the multivariate analysis, the SPIRML group had a higher risk of synchronous AA and ACN (odds ratio [OR]: 2.38 [1.77-3.21] and OR: 2.29 [1.72-3.05], respectively); in the case of ACN, this risk was statistically significant in both locations (proximal or distal), with OR slightly higher for the proximal location. Different subtypes of SPIRML had a higher risk of AA and synchronous NA. SPIRML were common in patients with SP, and their presence was associated with an increased risk of synchronous ACN. Copyright © 2016 Elsevier España, S.L.U. y AEEH y AEG. All rights reserved.

  6. Detection rate of serrated polyps and serrated polyposis syndrome in colorectal cancer screening cohorts: a European overview.

    IJspeert, J E G; Bevan, R; Senore, C; Kaminski, M F; Kuipers, E J; Mroz, A; Bessa, X; Cassoni, P; Hassan, C; Repici, A; Balaguer, F; Rees, C J; Dekker, E

    2017-07-01

    The role of serrated polyps (SPs) as colorectal cancer precursor is increasingly recognised. However, the true prevalence SPs is largely unknown. We aimed to evaluate the detection rate of SPs subtypes as well as serrated polyposis syndrome (SPS) among European screening cohorts. Prospectively collected screening cohorts of ≥1000 individuals were eligible for inclusion. Colonoscopies performed before 2009 and/or in individuals aged below 50 were excluded. Rate of SPs was assessed, categorised for histology, location and size. Age-sex-standardised number needed to screen (NNS) to detect SPs were calculated. Rate of SPS was assessed in cohorts with known colonoscopy follow-up data. Clinically relevant SPs (regarded as a separate entity) were defined as SPs ≥10 mm and/or SPs >5 mm in the proximal colon. Three faecal occult blood test (FOBT) screening cohorts and two primary colonoscopy screening cohorts (range 1.426-205.949 individuals) were included. Rate of SPs ranged between 15.1% and 27.2% (median 19.5%), of sessile serrated polyps between 2.2% and 4.8% (median 3.3%) and of clinically relevant SPs between 2.1% and 7.8% (median 4.6%). Rate of SPs was similar in FOBT-based cohorts as in colonoscopy screening cohorts. No apparent association between the rate of SP and gender or age was shown. Rate of SPS ranged from 0% to 0.5%, which increased to 0.4% to 0.8% after follow-up colonoscopy. The detection rate of SPs is variable among screening cohorts, and standards for reporting, detection and histopathological assessment should be established. The median rate, as found in this study, may contribute to define uniform minimum standards for males and females between 50 and 75 years of age. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  7. A study of serrated plastic flow behavior in an aluminum-lithium binary alloy

    Sun, D.L.; Yang, D.Z.; Lei, T.Q.

    1990-01-01

    The serrated plastic flow behavior of an Al-2.73wt%Li alloy at various aging conditions is investigated. The stress-strain curve of the alloy is examined using an Instron machine. The microstructure of the alloy before and after deformation is observed using a transmission electron microscope. It has been shown that the stress-strain curve in the alloy is serrated and both time and/or temperature of aging affect the formation of serrations. The δ' phase (Al 3 Li) which is induced by plastic deformation precipitates along dislocations. The formation mechanism of the serrated stress-strain curve in the Al-Li binary alloy is discussed. (orig.)

  8. Aerodynamic robustness in owl-inspired leading-edge serrations: a computational wind-gust model.

    Rao, Chen; Liu, Hao

    2018-06-08

    Owls are a master to achieve silent flight in gliding and flapping flights under natural turbulent environments owing to their unique wing morphologies. While the leading-edge serrations are recently revealed, as a passive flow control micro-device, to play a crucial role in aerodynamic force production and sound suppression [25], the characteristics of wind-gust rejection associated with leading-edge serrations remain unclear. Here we address a large-eddy simulation (LES)-based study of aerodynamic robustness in owl-inspired leading-edge serrations, which is conducted with clean and serrated wing models through mimicking wind-gusts under a longitudinal fluctuation in free-stream inflow and a lateral fluctuation in pitch angle over a broad range of angles of attack (AoAs) over 0° ≤ Φ ≤ 20°. Our results show that the leading-edge serration-based passive flow control mechanisms associated with laminar-turbulent transition work effectively under fluctuated inflow and wing pitch, indicating that the leading-edge serrations are of potential gust fluctuation rejection or robustness in aerodynamic performance. Moreover, it is revealed that the tradeoff between turbulent flow control (i.e., aero-acoustic suppression) and force production in the serrated model holds independently to the wind-gust environments: poor at lower AoAs but capable of achieving equivalent aerodynamic performance at higher AoAs > 15o compared to the clean model. Our results reveal that the owl-inspired leading-edge serrations can be a robust micro-device for aero-acoustic control coping with unsteady and complex wind environments in biomimetic rotor designs for various fluid machineries. © 2018 IOP Publishing Ltd.

  9. The Association Between Molecular Markers in Colorectal Sessile Serrated Polyps and Colorectal Cancer Risk

    2017-08-01

    AWARD NUMBER: W81XWH-15-1-0273 TITLE: The Association between Molecular Markers in Colorectal Sessile Serrated Polyps and Colorectal Cancer ... Colorectal Cancer Risk 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-15-1-0273 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Andrea Burnett-Hartman 5d... cancer in patients with sessile serrated colorectal polyps (SSPs). The project’s specific aims are as follows: 1) Estimate the risk of colorectal

  10. Sessile serrated adenomas with dysplasia: morphological patterns and correlations with MLH1 immunohistochemistry.

    Liu, Cheng; Walker, Neal I; Leggett, Barbara A; Whitehall, Vicki Lj; Bettington, Mark L; Rosty, Christophe

    2017-12-01

    Sessile serrated adenomas are the precursor polyp of approximately 20% of colorectal carcinomas. Sessile serrated adenomas with dysplasia are rarely encountered and represent an intermediate step to malignant progression, frequently associated with loss of MLH1 expression. Accurate diagnosis of these lesions is important to facilitate appropriate surveillance, particularly because progression from dysplasia to carcinoma can be rapid. The current World Health Organization classification describes two main patterns of dysplasia occurring in sessile serrated adenomas, namely, serrated and conventional. However, this may not adequately reflect the spectrum of changes seen by pathologists in routine practice. Furthermore, subtle patterns of dysplasia that are nevertheless associated with loss of MLH1 expression are not encompassed in this classification. We performed a morphological analysis of 266 sessile serrated adenomas with dysplasia with concurrent MLH1 immunohistochemistry with the aims of better defining the spectrum of dysplasia occurring in these lesions and correlating dysplasia patterns with MLH1 expression. We found that dysplasia can be divided morphologically into four major patterns, comprising minimal deviation (19%), serrated (12%), adenomatous (8%) and not otherwise specified (79%) groups. Minimal deviation dysplasia is defined by minor architectural and cytological changes that typically requires loss of MLH1 immunohistochemical expression to support the diagnosis. Serrated dysplasia and adenomatous dysplasia have distinctive histological features and are less frequently associated with loss of MLH1 expression (13 and 5%, respectively). Finally, dysplasia not otherwise specified encompasses most cases and shows a diverse range of morphological changes that do not fall into the other subgroups and are frequently associated with loss of MLH1 expression (83%). This morphological classification of sessile serrated adenomas with dysplasia may represent an

  11. The CIMP Phenotype in BRAF Mutant Serrated Polyps from a Prospective Colonoscopy Patient Cohort

    Winnie C. Fernando

    2014-01-01

    Full Text Available Colorectal cancers arising via the serrated pathway are often associated with BRAF V600E mutation, CpG island methylator phenotype (CIMP, and microsatellite instability. Previous studies have shown a strong association between BRAF V600E mutation and serrated polyps. This study aims to evaluate CIMP status of all the serrated polyp subtypes and its association with functionally important genes such as MLH1, p16, and IGFBP7. CIMP status and methylation were evaluated using the real-time based MethyLight assay in 154 serrated polyps and 63 conventional adenomas. Results showed that CIMP-high serrated polyps were strongly associated with BRAF mutation and proximal colon. CIMP-high was uncommon in conventional adenomas (1.59%, occurred in 8.25% of hyperplastic polyps (HPs, and became common in sessile serrated adenomas (SSAs (51.43%. MLH1 methylation was mainly observed in the proximal colon and was significantly associated with BRAF mutation and CIMP-high. The number of samples methylated for p16 and IGFBP7 was the highest in SSAs. The methylation panel we used to detect CIMP is highly specific for CIMP-high cancers. With this panel, we demonstrate that CIMP-high is much more common in SSAs than HPs. This suggests that CIMP-high correlates with increased risk of malignant transformation which was also observed in methylation of functionally important genes.

  12. The CIMP Phenotype in BRAF Mutant Serrated Polyps from a Prospective Colonoscopy Patient Cohort.

    Fernando, Winnie C; Miranda, Mariska S; Worthley, Daniel L; Togashi, Kazutomo; Watters, Dianne J; Leggett, Barbara A; Spring, Kevin J

    2014-01-01

    Colorectal cancers arising via the serrated pathway are often associated with BRAF V600E mutation, CpG island methylator phenotype (CIMP), and microsatellite instability. Previous studies have shown a strong association between BRAF V600E mutation and serrated polyps. This study aims to evaluate CIMP status of all the serrated polyp subtypes and its association with functionally important genes such as MLH1, p16, and IGFBP7. CIMP status and methylation were evaluated using the real-time based MethyLight assay in 154 serrated polyps and 63 conventional adenomas. Results showed that CIMP-high serrated polyps were strongly associated with BRAF mutation and proximal colon. CIMP-high was uncommon in conventional adenomas (1.59%), occurred in 8.25% of hyperplastic polyps (HPs), and became common in sessile serrated adenomas (SSAs) (51.43%). MLH1 methylation was mainly observed in the proximal colon and was significantly associated with BRAF mutation and CIMP-high. The number of samples methylated for p16 and IGFBP7 was the highest in SSAs. The methylation panel we used to detect CIMP is highly specific for CIMP-high cancers. With this panel, we demonstrate that CIMP-high is much more common in SSAs than HPs. This suggests that CIMP-high correlates with increased risk of malignant transformation which was also observed in methylation of functionally important genes.

  13. Forensic implications of the variation in morphology of marginal serrations on the teeth of the great white shark

    Nambiar, P.; Brown, K. A.; Bridges, T. E.

    2017-01-01

    The teeth of the Great White Shark have been examined to ascertain whether there is any commonality in the arrangement or number of the marginal serrations (peaks) or, indeed, whether individual sharks have a unique pattern of shapes or size of the peaks. The teeth of the White Shark are characteristic in size and shape with serrations along almost the entire mesial and distal margins. This study has revealed no consistent pattern of size or arrangement of the marginal serrations that was suf...

  14. Deep learning of contrast-coated serrated polyps for computer-aided detection in CT colonography

    Näppi, Janne J.; Pickhardt, Perry; Kim, David H.; Hironaka, Toru; Yoshida, Hiroyuki

    2017-03-01

    Serrated polyps were previously believed to be benign lesions with no cancer potential. However, recent studies have revealed a novel molecular pathway where also serrated polyps can develop into colorectal cancer. CT colonography (CTC) can detect serrated polyps using the radiomic biomarker of contrast coating, but this requires expertise from the reader and current computer-aided detection (CADe) systems have not been designed to detect the contrast coating. The purpose of this study was to develop a novel CADe method that makes use of deep learning to detect serrated polyps based on their contrast-coating biomarker in CTC. In the method, volumetric shape-based features are used to detect polyp sites over soft-tissue and fecal-tagging surfaces of the colon. The detected sites are imaged using multi-angular 2D image patches. A deep convolutional neural network (DCNN) is used to review the image patches for the presence of polyps. The DCNN-based polyp-likelihood estimates are merged into an aggregate likelihood index where highest values indicate the presence of a polyp. For pilot evaluation, the proposed DCNN-CADe method was evaluated with a 10-fold cross-validation scheme using 101 colonoscopy-confirmed cases with 144 biopsy-confirmed serrated polyps from a CTC screening program, where the patients had been prepared for CTC with saline laxative and fecal tagging by barium and iodine-based diatrizoate. The average per-polyp sensitivity for serrated polyps >=6 mm in size was 93+/-7% at 0:8+/-1:8 false positives per patient on average. The detection accuracy was substantially higher that of a conventional CADe system. Our results indicate that serrated polyps can be detected automatically at high accuracy in CTC.

  15. Diversity and abundance of water birds in a subarctic lake during three decades

    Anders Klemetsen

    2013-12-01

    Full Text Available The numbers of divers, ducks, gulls, terns and waders in the 15 km2 oligotrophic lake Takvatn, North Norway were estimated six times during 1983-2012. Systematic mapping surveys were done by boat within the first week after ice-break in June. Twenty-one species were observed over the years and 12 were regarded as breeding on the lake. Red-breasted merganser Mergus serrator was the dominant diving bird, with estimated minimum number of pairs varying from 15 to 39 among years. Black-throated diver Gavia arctica (1-3 pairs, tufted duck Aythya fuligula (2-15 pairs and common scoter Melanitta nigra (1-5 pairs bred regularly, while velvet scoter Melanitta fusca (1-2 and goldeneye Bucephala clangula (2-4 were found in some years and mallard Anas platyrhynchos (1 pair and wigeon Anas penelope (1 pair in one year. Common gull Larus canus (6-30 pairs and arctic tern Sterna paradisaea (2-35 pairs bred in all years. Common sandpiper Tringa hypoleucos (3-9 pairs and redshank Tringa totanus (1-4 pairs were regular waders. Density variations of mergansers, gulls and terns are possibly related to density variations of three-spined sticklebacks Gasterosteus aculeatus, their dominant fish prey. The water birds are important links in the food web of the lake.

  16. How does the serrated polyp pathway alter CRC screening and surveillance?

    Kahi, Charles J

    2015-03-01

    Screening and surveillance for colorectal cancer (CRC) reduces mortality through the detection of early-stage adenocarcinoma, and more importantly the detection and removal of premalignant polyps. While adenomas have historically been considered the most common and screening-relevant precursor lesions, there is accumulating evidence showing that the serrated pathway is an important contributor to CRC, and a disproportionate contributor to interval or postcolonoscopy CRC, particularly in the proximal colon. The serrated pathway is characterized by mutations in the BRAF gene, high levels of methylation of promoter CpG islands (CIMP-high), and the sessile serrated adenoma/polyp (SSA/P) is the most important precursor lesion. The study of serrated polyps has been complicated by evolving nomenclature, substantial variation among pathologists in the identification of SSA/Ps, high variability in endoscopic detection rates, and uncertainty regarding the relation to synchronous and metachronous colonic neoplasia. This paper presents an overview of the serrated polyp pathway and discusses its clinical implications including its impact on CRC screening.

  17. Sessile serrated lesion and its borderline variant - Variables with impact on recorded data

    Mohammadi, Mahin; Garbyal, Rajendra S; Kristensen, Michael H.

    2011-01-01

    Sessile serrated lesion (SSL), belonging to non-dysplastic serrated polyps (SP), has lately received much focus. Its role in the serrated neoplasia pathway(s) seems well established. Data on prevalence rate, demography, and some polyp characteristics remain, however, to be firmly established. Nor...... has its relation to SPs with subtle aberrant features, falling short of definite SSL-histology, been sufficiently addressed. The aim of this study was to highlight variables that may influence recorded data on SSL and to further discuss the appropriate place of SPs that possess histological attributes...... intermediate between traditional hyperplastic polyp (HP) and SSL, termed borderline SSL (BSSL). Upon review of 8.324 consecutive colorectal polyps signed-out as HP, 219 SSLs and 206 BSSLs were segregated, using strict predetermined criteria. Predominant left-sidedness and equal gender distribution...

  18. Variation of leaf margin serration in Populus nigra of industrial dumps

    Yu. A. Shtirs

    2017-07-01

    Full Text Available The variability of leaf margin serration of Populus nigra L. in conditions of industrial dumps (coal mines dumps and overburden dumps and city park is estimated. The value of this indicator is in the range from 1.25 to 1.76 and significantly increases along the gradient: coal mines dumps – overburden dumps – city park. From the number of selected gradations of P. nigra leaf blades, the gradation with values of 1.45-1.55 is most pronounced according to the analyzed index for industrial dumps, for the park – with the values of 1.55-1.65. The degree of serration of edge leaf blade is characterized by low values of variation – coefficient of variation is less than 10.0%. We registered the significant positive correlation between the average values of leaf margin serration and the length of P. nigra leaf blade.

  19. An analytically-based method for predicting the noise generated by the interaction between turbulence and a serrated leading edge

    Mathews, J. R.; Peake, N.

    2018-05-01

    This paper considers the interaction of turbulence with a serrated leading edge. We investigate the noise produced by an aerofoil moving through a turbulent perturbation to uniform flow by considering the scattered pressure from the leading edge. We model the aerofoil as an infinite half plane with a leading edge serration, and develop an analytical model using a Green's function based upon the work of Howe. This allows us to consider both deterministic eddies and synthetic turbulence interacting with the leading edge. We show that it is possible to reduce the noise by using a serrated leading edge compared with a straight edge, but the optimal noise-reducing choice of serration is hard to predict due to the complex interaction. We also consider the effect of angle of attack, and find that in general the serrations are less effective at higher angles of attack.

  20. Noise model for serrated trailing edges compared to wind tunnel measurements

    Fischer, Andreas; Bertagnolio, Franck; Shen, Wen Zhong

    2016-01-01

    A new CFD RANS based method to predict the far field sound pressure emitted from an aerofoil with serrated trailing edge has been developed. The model was validated by comparison to measurements conducted in the Virginia Tech Stability Wind Tunnel. The model predicted 3 dB lower sound pressure...... levels, but the tendencies for the different configurations were predicted correctly. Therefore the model can be used to optimise the serration geometry. A disadvantage of the new model is that the computational costs are significantly higher than for the Amiet model for a straight trailing edge. However...

  1. Atomistic Origin of Rate-Dependent Serrated Plastic Flow in Metallic Glasses

    Yao YG

    2008-01-01

    Full Text Available Abstract Nanoindentation simulations on a binary metallic glass were performed under various strain rates by using molecular dynamics. The rate-dependent serrated plastic flow was clearly observed, and the spatiotemporal behavior of its underlying irreversible atomic rearrangement was probed. Our findings clearly validate that the serration is a temporally inhomogeneous characteristic of such rearrangements and not directly dependent on the resultant shear-banding spatiality. The unique spatiotemporal distribution of shear banding during nanoindentation is highlighted in terms of the potential energy landscape (PEL theory.

  2. [Clinical and endoscopic features of a selected population with serrated colorectal adenomas in a private clinic in Lima - Peru].

    Castillo, Ofelia; Barreda, Carlos; Recavarren, Sixto; Barriga, José A; Salazar M, Fernando; Yriberry, Simón; Barriga, Eduardo; Salazar C, Fernando

    2013-01-01

    To describe the clinical and endoscopic caracteristics of a population that has only serrated polyps of colon (mainly sessile serrated adenomas) in a private clinic in Lima, Perú, from 2009-2011. Retrospective study conducted at the endoscopy center of Clinic Ricardo Palma, Lima, Peru. Olympus colonoscope was used with high definition, including NBI (narrow band imaging) and electronic magnification. Patients had pathologic diagnosis of “polyps and / or colorectal serrated adenomas” and excluded those with synchronous tubular or villous adenomas. Images were evaluated by two endoscopists and then by a third gastroenterologist. We found 201 serrated polyps in 108 patients. Women were 60.2% and overweight predominated. Eighty (74.1%) had only one serrated adenoma and 23 (21.3%) with at least one synchronous hyperplastic polyp. The average size of sessile serrated adenomas was 5.12 mm (± 3.87 DS) and the flat type was 91 (58.7%). There were significant differences in the diameter of sessile serrated adenomas between the distal and proximal colon (4.47 mm ± 2.23 vs. 6.90 mm ± 6.25; p<0.000). The common features of sessile serrated adenomas were: White (31/36, 86.1%), smooth (28/36, 77.8%) and regular margins (26/36, 72.2%). There was a relationship between vascular pattern according NBI and serrated polyp histology (p=0.024). The endoscopic features of sessile serrated adenomas can evade detection to white light. NBI is a useful tool to define some features of these lesions.

  3. Effect of a serrated trailing edge on sound radiation from nearby quadrupoles.

    Karimi, Mahmoud; Croaker, Paul; Kinns, Roger; Kessissoglou, Nicole

    2017-05-01

    A periodic boundary element technique is implemented to study the noise reduction capability of a plate with a serrated trailing edge under quadrupole excitation. It is assumed for this purpose that the quadrupole source tensor is independent of the trailing edge configuration and that the effect of the trailing edge shape is to modify sound radiation from prescribed boundary layer sources. The flat plate is modelled as a continuous structure with a finite repetition of small spanwise segments. The matrix equation formulated by the periodic boundary element method for this 3D acoustic scattering problem is represented as a block Toeplitz matrix. The discrete Fourier transform is employed in an iterative algorithm to solve the block Toeplitz system. The noise reduction mechanism for a serrated trailing edge in the near field is investigated by comparing contour plots obtained from each component of the quadrupole for unserrated and serrated trailing edge plate models. The noise reduction due to the serrated trailing edge is also examined as a function of the source location.

  4. Improvement of creep-rupture properties by serrated grain boundaries in high-tungsten cobalt-base superalloys

    Tanaka, Manabu

    1993-01-01

    The improvement of creep-rupture properties by serrated grain boundaries was investigated using cobalt-base superalloys containing about 14 to 20 wt.% tungsten at 1089 and 1311 K. Serrated grain boundaries improved both the rupture life and the ductility, especially under lower stresses at 1089 K. The increase in rupture life was larger in the alloys containing a larger amount of W. Ductile grain boundary fracture surfaces, which involved dimple patterns and grain boundary ledges, were observed in the specimens with serrated grain boundaries whereas brittle grain boundary facets were observed in the specimens with normal straight grain boundaries ruptured at 1089 K. The strengthening by serrated grain boundaries was also effective at 1311 K, but there was little difference in rupture life between the specimens with serrated grain boundaries and those with straight grain boundaries under lower stresses, since serrated grain boundaries developed also in the specimens with straight grain boundaries according to grain boundary precipitates forming during creep at 1311 K. The increase in W content of the alloys led to the increase in rupture life of the specimens with serrated grain boundaries at 1089 and 1311 K. (orig.) [de

  5. Clinical characteristics of patients with serrated polyposis syndrome in Korea: comparison with Western patients

    Eun Ran Kim

    2017-07-01

    Full Text Available Background/Aims: Serrated polyposis syndrome (SPS has been shown to increase the risk of colorectal cancer (CRC. However, little is known about the characteristics of Asian patients with SPS. This study aimed to identify the clinicopathological features and risk of CRC in Korean patients with SPS as well as the differences between Korean and Western patients based on a literature review.Methods: This retrospective study included 30 patients with SPS as defined by World Health Organization classification treated at Samsung Medical Center, Korea, between March 1999 and May 2011.Results: Twenty patients (67% were male. The median patient age at diagnosis was 56 years (range, 39–76 years. A total of 702 polyps were identified during a median follow-up of 43 months (range, 0–149 months. Serrated polyps were noted more frequently in the distal colon (298/702, 55%. However, large serrated polyps and serrated adenomas were mainly distributed throughout the proximal colon (75% vs. 25% and 81% vs. 19%, respectively; 73.3% had synchronous adenomatous polyps. The incidence of CRC was 10% (3/30 patients, but no interval CRC was detected. A total of 87% of the patients underwent esophagogastroduodenoscopy and 19.2% had significant lesions.Conclusions: The phenotype of SPS in Korean patients is different from that of Western patients. In Korean patients, SPS is more common in men, there were fewer total numbers of serrated adenoma/polyps, and the incidence of CRC was lower than that in Western patients. Korean patients tend to more frequently have abnormal gastric lesions. However, the prevalence of synchronous adenomatous polyps is high in both Western and Korean patients.

  6. Forensic implications of the variation in morphology of marginal serrations on the teeth of the great white shark.

    Nambiar, P; Brown, K A; Bridges, T E

    1996-06-01

    The teeth of the Great White Shark have been examined to ascertain whether there is any commonality in the arrangement or number of the marginal serrations (peaks) or, indeed, whether individual sharks have a unique pattern of shapes or size of the peaks. The teeth of the White Shark are characteristic in size and shape with serrations along almost the entire mesial and distal margins. This study has revealed no consistent pattern of size or arrangement of the marginal serrations that was sufficiently characteristic within an individual shark to serve as a reliable index of identification of a tooth as originating from that particular shark. Nonetheless, the serrations are sufficiently distinctive to enable the potential identification of an individual tooth as having been the cause of a particular bitemark.

  7. Nanoindentation study on the characteristic of shear transformation zone in a Pd-based bulk metallic glass during serrated flow

    Liao, G. K.; Long, Z. L.; Zhao, M. S. Z.; Peng, L.; Chai, W.; Ping, Z. H.

    2018-04-01

    This paper presents the research on the evolution of shear transformation zone (STZ) in a Pd-based bulk metallic glass (BMG) during serrated flow under nanoindentation. A novel method of estimating the STZ volume through statistical analysis of the serrated flow behavior was proposed for the first time. Based on the proposed method, the STZ volume of the studied BMG at various peak loads have been systematically investigated. The results indicate that the measured STZ volumes are in good agreement with that documented in literature, and the STZ size exhibits an increasing trend during indentation. Moreover, the correlation between the serrated flow dynamics and the STZ activation has also been evaluated. It is found that the STZ activation can promote the formation of self-organized critical (SOC) state during serrated flow.

  8. Merganser Download Package

    U.S. Environmental Protection Agency — This data download package contains an Esri 10.0 MXD, file geodatabase and copy of this FGDC metadata record. The data in this package are used in support of the...

  9. A role for the epidermal growth factor receptor signaling in development of intestinal serrated polyps in mice and humans.

    Bongers, Gerold; Muniz, Luciana R; Pacer, Michelle E; Iuga, Alina C; Thirunarayanan, Nanthakumar; Slinger, Erik; Smit, Martine J; Reddy, E Premkumar; Mayer, Lloyd; Furtado, Glaucia C; Harpaz, Noam; Lira, Sergio A

    2012-09-01

    Epithelial cancers can be initiated by activating mutations in components of the mitogen-activated protein kinase signaling pathway such as v-raf murine sarcoma viral oncogene homolog B1 (BRAF), v-Ki-ras2 Kirsten rat sarcoma viral oncogene homolog (KRAS), or epidermal growth factor receptor (EGFR). Human intestinal serrated polyps are a heterogeneous group of benign lesions, but some progress to colorectal cancer. Tumors that arise from these polyps frequently contain activating mutations in BRAF or KRAS, but little is known about the role of EGFR activation in their development. Polyp samples were obtained from adults during screening colonoscopies at Mount Sinai Hospital in New York. We measured levels of EGFR protein and phosphorylation in human serrated polyps by immunohistochemical and immunoblot analyses. We generated transgenic mice that express the ligand for EGFR, Heparin-binding EGF-like growth factor (HB-EGF), in the intestine. EGFR and the extracellular-regulated kinases (ERK)1/2 were phosphorylated in serrated areas of human hyperplastic polyps (HPPs), sessile serrated adenomas, and traditional serrated adenomas. EGFR and ERK1/2 were phosphorylated in the absence of KRAS or BRAF activating mutations in a subset of HPP. Transgenic expression of the EGFR ligand HB-EGF in the intestines of mice promoted development of small cecal serrated polyps. Mice that expressed a combination of HB-EGF and US28 (a constitutively active, G-protein-coupled receptor that increases processing of HB-EGF from the membrane) rapidly developed large cecal serrated polyps. These polyps were similar to HPPs and had increased phosphorylation of EGFR and ERK1/2 within the serrated epithelium. Administration of pharmacologic inhibitors of EGFR or MAPK to these transgenic mice significantly reduced polyp development. Activation of EGFR signaling in the intestine of mice promotes development of serrated polyps. EGFR signaling also is activated in human HPPs, sessile serrated adenomas

  10. Risk factors for colorectal cancer in patients with multiple serrated polyps: a cross-sectional case series from genetics clinics.

    Daniel D Buchanan

    2010-07-01

    Full Text Available Patients with multiple serrated polyps are at an increased risk for developing colorectal cancer (CRC. Recent reports have linked cigarette smoking with the subset of CRC that develops from serrated polyps. The aim of this work therefore was to investigate the association between smoking and the risk of CRC in high-risk genetics clinic patients presenting with multiple serrated polyps.We identified 151 Caucasian individuals with multiple serrated polyps including at least 5 outside the rectum, and classified patients into non-smokers, current or former smokers at the time of initial diagnosis of polyposis. Cases were individuals with multiple serrated polyps who presented with CRC. Controls were individuals with multiple serrated polyps and no CRC. Multivariate logistic regression was performed to estimate associations between smoking and CRC with adjustment for age at first presentation, sex and co-existing traditional adenomas, a feature that has been consistently linked with CRC risk in patients with multiple serrated polyps. CRC was present in 56 (37% individuals at presentation. Patients with at least one adenoma were 4 times more likely to present with CRC compared with patients without adenomas (OR = 4.09; 95%CI 1.27 to 13.14; P = 0.02. For females, the odds of CRC decreased by 90% in current smokers as compared to never smokers (OR = 0.10; 95%CI 0.02 to 0.47; P = 0.004 after adjusting for age and adenomas. For males, there was no relationship between current smoking and CRC. There was no statistical evidence of an association between former smoking and CRC for both sexes.A decreased odds for CRC was identified in females with multiple serrated polyps who currently smoke, independent of age and the presence of a traditional adenoma. Investigations into the biological basis for these observations could lead to non-smoking-related therapies being developed to decrease the risk of CRC and colectomy in these patients.

  11. A CpG island methylator phenotype of colorectal cancer that is contiguous with conventional adenomas, but not serrated polyps

    HOKAZONO, KOJI; UEKI, TAKASHI; NAGAYOSHI, KINUKO; NISHIOKA, YASUNOBU; HATAE, TATSUNOBU; KOGA, YUTAKA; HIRAHASHI, MINAKO; ODA, YOSHINAO; TANAKA, MASAO

    2014-01-01

    A subset of colorectal cancers (CRCs) harbor the CpG island methylator phenotype (CIMP), with concurrent multiple promoter hypermethylation of tumor-related genes. A serrated pathway in which CIMP is developed from serrated polyps is proposed. The present study characterized CIMP and morphologically examined precursor lesions of CIMP. In total, 104 CRCs treated between January 1996 and December 2004 were examined. Aberrant promoter methylation of 15 cancer-related genes was analyzed. CIMP sta...

  12. Filiform serrated adenomatous polyposis arising in a diverted rectum of an inflammatory bowel disease patient

    Klarskov, Louise; Mogensen, Anne Mellon; Jespersen, Niels

    2011-01-01

    Klarskov L, Mogensen AM, Jespersen N, Ingeholm P, Holck S. Filiform serrated adenomatous polyposis arising in a diverted rectum of an inflammatory bowel disease patient. APMIS 2011; 119: 393-8. A 54-year-old man, previously colectomized for inflammatory bowel disease, developed carcinoma in the i......Klarskov L, Mogensen AM, Jespersen N, Ingeholm P, Holck S. Filiform serrated adenomatous polyposis arising in a diverted rectum of an inflammatory bowel disease patient. APMIS 2011; 119: 393-8. A 54-year-old man, previously colectomized for inflammatory bowel disease, developed carcinoma...... during the adenoma carcinoma sequence included the acquisition of CK7 expression in the malignant portion. Gastric mucin may play a role in the initial step of the neoplastic evolution and CK7 may denote neoplastic progression. This case confirms the notion of a widely variegated morphology of precursor...

  13. Subtypes of the Type II Pit Pattern Reflect Distinct Molecular Subclasses in the Serrated Neoplastic Pathway.

    Aoki, Hironori; Yamamoto, Eiichiro; Yamano, Hiro-O; Sugai, Tamotsu; Kimura, Tomoaki; Tanaka, Yoshihito; Matsushita, Hiro-O; Yoshikawa, Kenjiro; Takagi, Ryo; Harada, Eiji; Nakaoka, Michiko; Yoshida, Yuko; Harada, Taku; Sudo, Gota; Eizuka, Makoto; Yorozu, Akira; Kitajima, Hiroshi; Niinuma, Takeshi; Kai, Masahiro; Nojima, Masanori; Suzuki, Hiromu; Nakase, Hiroshi

    2018-03-15

    Colorectal serrated lesions (SLs) are important premalignant lesions whose clinical and biological features are not fully understood. We aimed to establish accurate colonoscopic diagnosis and treatment of SLs through evaluation of associations among the morphological, pathological, and molecular characteristics of SLs. A total of 388 premalignant and 18 malignant colorectal lesions were studied. Using magnifying colonoscopy, microsurface structures were assessed based on Kudo's pit pattern classification system, and the Type II pit pattern was subcategorized into classical Type II, Type II-Open (Type II-O) and Type II-Long (Type II-L). BRAF/KRAS mutations and DNA methylation of CpG island methylator phenotype (CIMP) markers (MINT1, - 2, - 12, - 31, p16, and MLH1) were analyzed through pyrosequencing. Type II-O was tightly associated with sessile serrated adenoma/polyps (SSA/Ps) with BRAF mutation and CIMP-high. Most lesions with simple Type II or Type II-L were hyperplastic polyps, while mixtures of Type II or Type II-L plus more advanced pit patterns (III/IV) were characteristic of traditional serrated adenomas (TSAs). Type II-positive TSAs frequently exhibited BRAF mutation and CIMP-low, while Type II-L-positive TSAs were tightly associated with KRAS mutation and CIMP-low. Analysis of lesions containing both premalignant and cancerous components suggested Type II-L-positive TSAs may develop into KRAS-mutated/CIMP-low/microsatellite stable cancers, while Type II-O-positive SSA/Ps develop into BRAF-mutated/CIMP-high/microsatellite unstable cancers. These results suggest that Type II subtypes reflect distinct molecular subclasses in the serrated neoplasia pathway and that they could be useful hallmarks for identifying SLs at high risk of developing into CRC.

  14. Loss of expression and promoter methylation of SLIT2 are associated with sessile serrated adenoma formation.

    Andrew D Beggs

    2013-05-01

    Full Text Available Serrated adenomas form a distinct subtype of colorectal pre-malignant lesions that may progress to malignancy along a different molecular pathway than the conventional adenoma-carcinoma pathway. Previous studies have hypothesised that BRAF mutation and promoter hypermethylation plays a role, but the evidence for this is not robust. We aimed to carry out a whole-genome loss of heterozygosity analysis, followed by targeted promoter methylation and expression analysis to identify potential pathways in serrated adenomas. An initial panel of 9 sessile serrated adenomas (SSA and one TSA were analysed using Illumina Goldengate HumanLinkage panel arrays to ascertain regions of loss of heterozygosity. This was verified via molecular inversion probe analysis and microsatellite analysis of a further 32 samples. Methylation analysis of genes of interest was carried out using methylation specific PCR (verified by pyrosequencing and immunohistochemistry used to correlate loss of expression of genes of interest. All experiments used adenoma samples and normal tissue samples as control. SSA samples were found on whole-genome analysis to have consistent loss of heterozygosity at 4p15.1-4p15.31, which was not found in the sole TSA, adenomas, or normal tissues. Genes of interest in this region were PDCH7 and SLIT2, and combined MSP/IHC analysis of these genes revealed significant loss of SLIT2 expression associated with promoter methylation of SLIT2. Loss of expression of SLIT2 by promoter hypermethylation and loss of heterozygosity events is significantly associated with serrated adenoma development, and SLIT2 may represent a epimutated tumour suppressor gene according to the Knudson "two hit" hypothesis.

  15. An investigation into the anti-releasing performance of a serrated bolt

    Jeong, Jin Hwan; Lee, Hyun Kyu; Park, Ke Un; Kim, Jong Bong [Seoul Natinal University, Seoul (Korea, Republic of)

    2015-11-15

    As the sizes of electric products, such as mobile phones and watch phones, decrease, the joining bolt for the electric product should also be miniaturized. However, the miniature-sized bolt has to support sufficient joining torque and joining force. The bolt also has to support sufficient anti-releasing torque to keep the product fastened. We investigated a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-release torque. In the serrated bolt, serration shapes are formed on the bottom surface of a bolt head to create an obstacle to releasing. In this study, finite element analyses were carried out on joining and releasing, and the anti-release torque was predicted. Through the joining and releasing analyses for various values of the elastic modulus and yield strength of the joined part, the effect of the mechanical properties of the joined part on the anti-releasing performance were investigated. The analysis results showed that a high strength insert nut is needed to increase the anti-releasing torque when the yield strength of the joined part is low, such as a plastic board in a mobile phone.

  16. Parametric study on the characteristics of a SDBD actuator with a serrated electrode

    Gao, Guoqiang; Peng, Kaisheng; Dong, Lei; Wei, Wenfu; Wu, Guangning

    2017-06-01

    Active flow control based on surface dielectric barrier discharge (SDBD) has become a focus of research in recent years, due to its unique advantages and diverse potential applications. Compared with the conventional SDBD with straight electrodes, the serrated electrode-based SDBD has a great advantage due to its 3D flow topology. It is believed that the boundary layer separation of moving objects can be controlled more effectively with this new type of SDBD. In SDBD with a serrated electrode, the R (tip sharpness) and N (tip number per unit length) have a great influence on the discharge and induced airflow characteristics. In this paper, a parametric study of the characteristics of SDBD with a serrated electrode has been conducted with different ranges of R and N. Aspects of the power consumption, the steady medium temperature distribution, and the maximum induced airflow velocity have been investigated. The results indicate that there is a critical value of R and N where the maximum power consumption and induced airflow velocity are achieved. The uniformity of the steady temperature distribution of the medium surface is found to be more dependent on N. We found that the accelerating effects of the induced airflow can be evaluated with the Schlieren technique, which agree well with the results from the pitot tube.

  17. Invasive Mucinous Adenocarcinoma Associated with Adjacent Sessile Serrated Lesion of the Appendix Vermiform: A Case Report

    Osamu Kinoshita

    2014-01-01

    Full Text Available Although the definition of sessile serrated lesion (SSL of colon is controversial and the risk of progression to malignancy is also under investigation at present, SSL is generally described as a polyp characterized by a serrated architecture. It is estimated to represent a feature of a new cancerization pathway, coined “serrated neoplasia pathway,” particularly in right-sided colon adenocarcinomas. On the other hand, in appendix, the role of this pathway remains uncertain, probably because very few cases of appendiceal adenocarcinoma associated with SSL were reported, and furthermore, immunohistochemical examination was rarely carried out. We herein report an interesting case of invasive appendiceal mucinous adenocarcinoma exhibiting SSL, which was pathologically estimated as a potential precursor lesion, and performed representative immunohistochemistry for both the mucinous adenocarcinoma and SSL in the same specimen. To further elucidate the progression of the appendiceal carcinoma from SSL, both an adequate sectioning of the lesion and systematic immunohistochemical examination of a large number of appendiceal carcinoma cases containing adjacent SSL would be required.

  18. A standardized imaging protocol for the endoscopic prediction of dysplasia within sessile serrated polyps (with video).

    Tate, David J; Jayanna, Mahesh; Awadie, Halim; Desomer, Lobke; Lee, Ralph; Heitman, Steven J; Sidhu, Mayenaaz; Goodrick, Kathleen; Burgess, Nicholas G; Mahajan, Hema; McLeod, Duncan; Bourke, Michael J

    2018-01-01

    Dysplasia within sessile serrated polyps (SSPs) is difficult to detect and may be mistaken for an adenoma, risking incomplete resection of the background serrated tissue, and is strongly implicated in interval cancer after colonoscopy. The use of endoscopic imaging to detect dysplasia within SSPs has not been systematically studied. Consecutively detected SSPs ≥8 mm in size were evaluated by using a standardized imaging protocol at a tertiary-care endoscopy center over 3 years. Lesions suspected as SSPs were analyzed with high-definition white light then narrow-band imaging. A demarcated area with a neoplastic pit pattern (Kudo type III/IV, NICE type II) was sought among the serrated tissue. If this was detected, the lesion was labeled dysplastic (sessile serrated polyp with dysplasia); if not, it was labeled non-dysplastic (sessile serrated polyp without dysplasia). Histopathology was reviewed by 2 blinded specialist GI pathologists. A total of 141 SSPs were assessed in 83 patients. Median lesion size was 15.0 mm (interquartile range 10-20), and 54.6% were in the right side of the colon. Endoscopic evidence of dysplasia was detected in 36 of 141 (25.5%) SSPs; of these, 5 of 36 (13.9%) lacked dysplasia at histopathology. Two of 105 (1.9%) endoscopically designated non-dysplastic SSPs had dysplasia at histopathology. Endoscopic imaging, therefore, had an accuracy of 95.0% (95% confidence interval [CI], 90.1%-97.6%) and a negative predictive value of 98.1% (95% CI, 92.6%-99.7%) for detection of dysplasia within SSPs. Dysplasia within SSPs can be detected accurately by using a simple, broadly applicable endoscopic imaging protocol that allows complete resection. Independent validation of this protocol and its dissemination to the wider endoscopic community may have a significant impact on rates of interval cancer. (Clinical trial registration number: NCT03100552.). Copyright © 2018 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All

  19. Serrated Flow and Dynamic Strain Aging in Fe-Mn-C TWIP Steel

    Lan, Peng; Zhang, Jiaquan

    2018-01-01

    The tensile behavior, serrated flow, and dynamic strain aging of Fe-(20 to 24)Mn-(0.4 to 0.6)C twinning-induced plasticity (TWIP) steel have been investigated. A mathematical approach to analyze the DSA and PLC band parameters has been developed. For Fe-(20 to 24)Mn-(0.4 to 0.6)C TWIP steel with a theoretical ordering index (TOI) between 0.1 and 0.3, DSA can occur at the very beginning of plastic deformation and provide serrations during work hardening, while for TOI less than 0.1 the occurrence of DSA is delayed and twinning-dominant work hardening remains relatively smooth. The critical strain for the onset of DSA and PLC bands in Fe-Mn-C TWIP steels decreases as C content increases, while the numbers of serrations and bands increase. As Mn content increases, the critical strain for DSA and PLC band varies irregularly, but the numbers of serrations and bands increase. For Fe-(20 to 24)Mn-(0.4 to 0.6)C TWIP steel with grain size of about 10 to 20 μm, the twinning-induced work hardening rate is about 2.5 to 3.0 GPa, while the DSA-dominant hardening rate is about 2.0 GPa on average. With increasing engineering strain from 0.01 to 0.55 at an applied strain rate of 0.001s-1, the cycle time for PLC bands in Fe-Mn-C TWIP steel increases from 6.5 to 162 seconds, while the band velocity decreases from 4.5 to 0.5 mm s-1, and the band strain increases from 0.005 to 0.08. Increasing applied strain rate leads to a linear increase of band velocity despite composition differences. In addition, the influence of the Mn and C content on the tensile properties of Fe-Mn-C TWIP steel has been also studied. As C content increases, the yield strength and tensile strength of Fe-Mn-C TWIP steel increase, but the total elongation variation against C content is dependent on Mn content. As Mn content increases, the yield strength and tensile strength decrease, while the total elongation increases, despite C content. Taking both tensile properties and serrated flow behavior into

  20. Sessile serrated polyps of the colorectum are rare in patients with Lynch syndrome and in familial colorectal cancer families

    Andersen, S H; Lykke, E; Folker, M B

    2008-01-01

    Whereas the generally accepted carcinogenesis pathway of the microsatellite instabile high (MSI-H) colorectal carcinoma (CRC) involves the traditional adenoma in patients with Lynch syndrome, a serrate pathway involving serrate adenomas (SA) and sessile serrate polyps (SSP) characterize...... the sporadic MSI-H counterpart. Recent studies have, however, challenged such simple one-pathway models, inviting the consideration of alternative, unexpected pathways. Here, the issue as to the possible role of SSP, primarily in the context of Lynch syndrome, but also in subjects from familial CRC families...... (FCF) is addressed. Polyps coded as hyperplastic polyps (HP) from subjects with Lynch syndrome and FCF enrolled in the HNPCC-register at the Hvidovre University Hospital as well as adenomas from this population were retrieved and reviewed for features of SSP. Ninety-eight polyps coded as HP and 41...

  1. Theoretical performance of serrated external occulters for solar coronagraphy. Application to ASPIICS

    Rougeot, R.; Aime, C.

    2018-04-01

    Context. This study is made in the context of the future solar coronagraph ASPIICS of the ESA formation-flying mission Proba-3. Aims: In the context of solar coronagraphy, we provide a comparative study of the theoretical performance of serrated (or toothed) external occulters by varying the number and size of the teeth, which we compare to the sharp-edged and apodized disks. The tooth height is small (a few centimeters), to avoid hindering the observation of the solar corona near the limb. We first analyze the diffraction pattern produced by such occulters. In a second step, we compute the umbra profile by integration over the Sun. Methods: We explored a few methods to compute the diffraction pattern. Two of them were implemented. The first is based on 2D fast Fourier transformation (FFT) routines and a multiplication by the Fresnel filter of the form exp(-iπλzu2). Simple rules were derived and discussed to set the sampling conditions. The Maggi-Rubinowicz representation is then proposed as an alternative method, and is proven to be very efficient for this study. Results: Serrated occulters tend to create a two-level intensity pattern, the inner being the darker, which perfectly matches a previously reported geometrical prediction. The diffraction in this central region is lower by two to four orders of magnitude when compared to the sharp-edged disk. The achieved umbra level at the center ranges from 10-4 to below 10-7, depending on the geometry of the teeth. Conclusions: Our study shows that serrated occulters can achieve a high rejection and can almost reach the performance of the apodized disk when very many teeth are used. We prove that shaped occulters must be preferred to simple disks in solar and stellar coronagraphy.

  2. The serrated neoplasia pathway of colorectal tumors: Identification of MUC5AC hypomethylation as an early marker of polyps with malignant potential.

    Renaud, Florence; Mariette, Christophe; Vincent, Audrey; Wacrenier, Agnès; Maunoury, Vincent; Leclerc, Julie; Coppin, Lucie; Crépin, Michel; Van Seuningen, Isabelle; Leteurtre, Emmanuelle; Buisine, Marie-Pierre

    2016-03-15

    The serrated neoplasia pathway accounts for 20-30% of colorectal cancers (CRC), which are characterized by extensive methylation (CpG island methylation phenotype, CIMP), frequent BRAF mutation and high microsatellite instability (MSI). We recently identified MUC5AC mucin gene hypomethylation as a specific marker of MSI CRC. The early identification of preneoplastic lesions among serrated polyps is currently challenging. Here, we performed a detailed pathological and molecular analysis of a large series of colorectal serrated polyps and evaluated the usefulness of mucin genes MUC2 and MUC5AC to differentiate serrated polyps and to identify lesions with malignant potential. A series of 330 colorectal polyps including 218 serrated polyps [42 goblet cell-rich hyperplastic polyps (GCHP), 68 microvesicular hyperplastic polyps (MVHP), 100 sessile serrated adenoma (SSA) and eight traditional serrated adenoma (TSA)] and 112 conventional adenomas was analyzed for BRAF/KRAS mutations, MSI, CIMP, MLH1 and MGMT methylation, and MUC2 and MUC5AC expression and methylation. We show that MUC5AC hypomethylation is an early event in the serrated neoplasia pathway, and specifically detects MVHP and SSA, arguing for a filiation between MVHP, SSA and CIMP-H/MSI CRC, whereas GCHP and TSA arise from a distinct pathway. Moreover, MUC5AC hypomethylation specifically identified serrated lesions with BRAF mutation, CIMP-H or MSI, suggesting that it may be useful to identify serrated neoplasia pathway-related precursor lesions. Our data suggest that MVHP should be recognized among HP and require particular attention. © 2015 UICC.

  3. Performance Testing Of A Modified Centrifugal Fan With Serrated Blade Impeller

    Zaimar

    2017-10-01

    Full Text Available Changes of shape dimension and component part of impeller might change of characteristic fluid flow so that pressure static in the fan housing changed. Changing some geometric characteristics of the centrifugal fan has more efficiency taking with energy crises into consideration. Several factors that can affect fan performance namely design and type size rotation speed air condition or gas through a fan operating point on the nature of the relationship between a volume of air flow and pressure. The purpose of this research was to test of fan performance of the modified centrifugal fan with the serrated blade impeller. The addition of a percentage of closing the inlet causes the air volumetric rate the airflow energy BHP and total efficiency except for the fan total and static pressure. The experimental test results there are static pressure data and the resulting total pressure is different or distorted 10-17 of deviation from calculation data based on the fan laws. This is possible because of changes in the shape of the blade with serrated on the inside of the impeller. Based on the performance curve shows that the selection of impeller speeds of 800 RPM produces a relatively high air volumetric rate is proportional to the total pressure of the fan and the flow energy so that it is more efficient than other impeller speeds.

  4. Experimental demonstration of wind turbine noise reduction through optimized airfoil shape and trailing-edge serrations

    Oerlemans, S. [National Aerospace Laboratory NLR, Emmeloord (Netherlands); Schepers, J.G. [Unit Wind Energy, Energy research Centre of the Netherlands ECN, Petten (Netherlands); Guidati, G.; Wagner, S. [Institut fuer Aerodynamik und Gasdynamik IAG, Universitaet Stuttgart (Germany)

    2001-07-15

    The objective of the European project DATA (Design and Testing of Acoustically Optimized Airfoils for Wind Turbines) is a reduction of trailing-edge (TE) noise by modifying the airfoil shape and/or the application of trailing-edge serrations. This paper describes validation measurements that were performed in the DNW-LLF wind tunnel, on a model scale wind turbine with a two-bladed 4.5 m diameter rotor which was designed in the project. Measurements were done for one reference- and two acoustically optimized rotors, for varying flow conditions. The aerodynamic performance of the rotors was measured using a torque meter in the hub, and further aerodynamic information was obtained from flow visualization on the blades. The acoustic measurements were done with a 136 microphone out-of-flow acoustic array. Besides the location of the noise sources in the (stationary) rotor plane, a new acoustic processing method enabled identification of dominant noise source regions on the rotating blades. The results show dominant noise sources at the trailing-edge of the blade, close to the tip. The optimized airfoil shapes result in a significant reduction of TE noise levels with respect to the reference rotor, without loss in power production. A further reduction can be achieved by the application of trailing-edge serrations. The aerodynamic measurements are generally in good agreement with the aerodynamic predictions made during the design of the model turbine.

  5. The clinical significance and synchronous polyp burden of large (≥ 20 mm) sessile serrated polyps in patients without serrated polyposis syndrome.

    Desomer, Lobke; Tate, David J; Jayanna, Mahesh; Pellise, Maria; Awadie, Halim; Burgess, Nicholas G; McLeod, Duncan; Mahajan, Hema; Lee, Eric Y T; Williams, Stephen J; Bourke, Michael J

    2018-05-08

     Sessile serrated polyps (SSPs) are important precursors of colorectal carcinoma and interval cancer. Large SSPs (≥ 20 mm) outside the definition of serrated polyposis syndrome (SPS) have not been studied in comparison with SPS. We aimed to describe the characteristics of patients with large SSPs in this context.  Patients with at least one SSP (≥ 20 mm) were eligible. Data from three consecutive colonoscopies were used to compare clinical and endoscopic characteristics in three patient groups: SPS, a solitary large SSP, and patients with at least two SSPs without fulfilling the criteria for SPS (oligo-SSP). Data on the diagnostic colonoscopy were collected retrospectively, whereas the remaining data was collected prospectively.  67/146 patients (45.9 %) had SPS, 53/146 (36.3 %) had a solitary SSP, and 26/146 (17.8 %) were categorized as oligo-SSP. Personal (16.4 %, 9.4 %, and 11.5 %, respectively) and family (17.9 %, 17.0 %, and 23.1 %, respectively) history of colorectal carcinoma did not differ significantly between groups. Polyp burden was greater in SPS compared with solitary SSP but was not different from oligo-SSP (advanced adenomas: SPS 32.8 % vs. solitary SSP 9.4 % [ P  = 0.002] vs. oligo-SSP 34.6 % [ P  = 0.87]; ≥ 10 conventional adenomas: 11.9 % vs. 0 % [ P  = 0.01] vs. 3.8 % [ P  = 0.44], respectively). Dysplasia in large SSPs was frequent in all groups (41.1 % overall). SPS was recognized by referring endoscopists in only 9.0 % of cases.  Patients with oligo-SSPs have similar synchronous polyp burden and clinical characteristics as patients with SPS and may require similar surveillance. Modification of the criteria for the diagnosis of SPS to include this group seems warranted. Patients with a solitary SSP have a lower risk of synchronous polyps, including advanced adenomas. Larger studies are warranted to determine whether these patients may return to standard surveillance

  6. Owl-inspired leading-edge serrations play a crucial role in aerodynamic force production and sound suppression.

    Rao, Chen; Ikeda, Teruaki; Nakata, Toshiyuki; Liu, Hao

    2017-07-04

    Owls are widely known for silent flight, achieving remarkably low noise gliding and flapping flights owing to their unique wing morphologies, which are normally characterized by leading-edge serrations, trailing-edge fringes and velvet-like surfaces. How these morphological features affect aerodynamic force production and sound suppression or noise reduction, however, is still not well known. Here we address an integrated study of owl-inspired single feather wing models with and without leading-edge serrations by combining large-eddy simulations (LES) with particle-image velocimetry (PIV) and force measurements in a low-speed wind tunnel. With velocity and pressure spectra analysis, we demonstrate that leading-edge serrations can passively control the laminar-turbulent transition over the upper wing surface, i.e. the suction surface at all angles of attack (0°    15° where owl wings often reach in flight. Our results indicate that the owl-inspired leading-edge serrations may be a useful device for aero-acoustic control in biomimetic rotor designs for wind turbines, aircrafts, multi-rotor drones as well as other fluid machinery.

  7. MicroRNA-31 expression in relation to BRAF mutation, CpG island methylation and colorectal continuum in serrated lesions.

    Ito, Miki; Mitsuhashi, Kei; Igarashi, Hisayoshi; Nosho, Katsuhiko; Naito, Takafumi; Yoshii, Shinji; Takahashi, Hiroaki; Fujita, Masahiro; Sukawa, Yasutaka; Yamamoto, Eiichiro; Takahashi, Taiga; Adachi, Yasushi; Nojima, Masanori; Sasaki, Yasushi; Tokino, Takashi; Baba, Yoshifumi; Maruyama, Reo; Suzuki, Hiromu; Imai, Kohzoh; Yamamoto, Hiroyuki; Shinomura, Yasuhisa

    2014-12-01

    The CpG island methylator phenotype (CIMP) is a distinct form of epigenomic instability. Many CIMP-high colorectal cancers (CRCs) with BRAF mutation are considered to arise from serrated pathway. We recently reported that microRNA-31 (miR-31) is associated with BRAF mutation in colorectal tumors. Emerging new approaches have revealed gradual changes in BRAF mutation and CIMP-high throughout the colorectum in CRCs. Here, we attempted to identify a possible association between miR-31 and epigenetic features in serrated pathway, and hypothesized that miR-31 supports the "colorectal continuum" concept. We evaluated miR-31 expression, BRAF mutation and epigenetic features including CIMP status in 381 serrated lesions and 222 non-serrated adenomas and examined associations between them and tumor location (rectum; sigmoid, descending, transverse and ascending colon and cecum). A significant association was observed between high miR-31 expression and CIMP-high status in serrated lesions with BRAF mutation (p = 0.0001). In contrast, miR-31 was slightly but insignificantly associated with CIMP status in the cases with wild-type BRAF. miR-31 expression in sessile serrated adenomas (SSAs) with cytological dysplasia was higher than that in SSAs, whereas, no significant difference was observed between traditional serrated adenomas (TSAs) and TSAs with high-grade dysplasia. The frequency of miR-31, BRAF mutation CIMP-high and MLH1 methylation increased gradually from the rectum to cecum in serrated lesions. In conclusion, miR-31 expression was associated with CIMP-high status in serrated lesions with BRAF mutation. Our data also suggested that miR-31 plays an important role in SSA evolution and may be a molecule supporting the colorectal continuum. © 2014 UICC.

  8. Molecular features of colorectal hyperplastic polyps and sessile serrated adenoma/polyps from Korea.

    Kim, Kyoung-Mee; Lee, Eui Jin; Ha, Sangyun; Kang, So Young; Jang, Kee-Taek; Park, Cheol Keun; Kim, Jin Yong; Kim, Young Ho; Chang, Dong Kyung; Odze, Robert Daniel

    2011-09-01

    Abundant recent data suggest that sessile serrated adenoma/polyp (SSA/P) is an early precursor lesion in the serrated pathway of carcinogenesis. It is believed that SSA/Ps develop cancer by an SSA/P-dysplasia-carcinoma sequence. Hyperplastic polyps (HPs) share some histologic and molecular characteristics with SSA/P, but it is unclear whether SSA/Ps are derived from HPs or whether they develop by a different pathogenetic pathway. Previous studies have shown that serrated polyps from Korean patients show different prevalence rates of certain molecular abnormalities compared with similar lesions from American patients, and this suggests that lifestyle and dietary factors may influence the serrated neoplasia pathway. The purpose of this study was to evaluate the molecular features of HPs and SSA/Ps, the latter both with and without dysplasia, from Korean patients and to compare the findings with similar lesions from American patients. One hundred and eleven serrated polyps, consisting of 45 HPs (30 microvesicular, 11 goblet cell, 4 mucin depleted) and 56 SSA/Ps (36 with dysplasia, 20 without dysplasia), were retrieved from the pathology files of a large medical center in Korea and 38 SSA/P from American patients were evaluated for BRAF and KRAS mutations, microsatellite instability, and hypermethylation of O6-methylguanine-DNA methyltransferase (MGMT), hMLH1, adenomatous polyposis coli (APC), p16, methylated in tumor-1 (MINT-1), MINT2, and MINT31. Methylation of hMLH1 was performed using 2 different sets of primers. Twenty-three conventional adenomas from Korean patients were included as controls. The data were compared between polyp subtypes and between polyps in the right versus the left colon. With regard to HP, KRAS mutations were present in 31.1% of polyps and BRAF mutations in 46.7% of polyps. KRAS mutations were significantly more common in goblet cell HP and BRAF in microvesicular HP (MVHP). Methylation of MGMT, hMLH1, APC, p16, MINT1, MINT2, and MINT31 were

  9. Pressure flaking to serrate bifacial points for the hunt during the MIS5 at Sibudu Cave (South Africa.

    Veerle Rots

    Full Text Available Projectile technology is considered to appear early in the southern African Middle Stone Age (MSA and the rich and high resolution MSA sequence of Sibudu Cave in KwaZulu-Natal has provided many new insights about the use and hafting of various projectile forms. We present the results of a functional and technological analysis on a series of unpublished serrated bifacial points recently recovered from the basal deposits of Sibudu Cave. These serrated tools, which only find equivalents in the neighbouring site of Umhlatuzana, precede the Still Bay techno-complex and are older than 77 ka BP. Independent residue and use-wear analyses were performed in a phased procedure involving two separate analysts, which allowed the engagement between two separate lines of functional evidence. Thanks to the excellent preservation at Sibudu Cave, a wide range of animal, plant and mineral residues were observed in direct relation with diagnostic wear patterns. The combination of technological, wear and residue evidence allowed us to confirm that the serration was manufactured with bone compressors and that the serrated points were mounted with a composite adhesive as the tips of projectiles used in hunting activities. The suite of technological and functional data pushes back the evidence for the use of pressure flaking during the MSA and highlights the diversity of the technical innovations adopted by southern African MSA populations. We suggest the serrated points from the stratigraphic units Adam to Darya of Sibudu illustrate one important technological adaptation of the southern African MSA and provide another example of the variability of MSA bifacial technologies.

  10. Advantages of magnifying narrow-band imaging for diagnosing colorectal cancer coexisting with sessile serrated adenoma/polyp.

    Chino, Akiko; Osumi, Hiroki; Kishihara, Teruhito; Morishige, Kenjiro; Ishikawa, Hirotaka; Tamegai, Yoshiro; Igarashi, Masahiro

    2016-04-01

    In the present study, we investigated the advantages of narrow-band imaging (NBI) for efficient diagnosis of sessile serrated adenoma/polyp (SSA/P). The main objective of this study was to analyze the characteristic features of cancer coexisting with serrated lesion by carrying out NBI. We evaluated 264 non-malignant serrated lesions by using three modalities (conventional white light colonoscopy, magnifying chromoendoscopy, and magnifying NBI). Of the evaluated cancer cases with serrated lesions, 37 fulfilled the inclusion criteria. In diagnosing non-malignant SSA/P, an expanded crypt opening (ECO) under magnifying NBI is a useful sign. One hundred and twenty-five lesions (87%) of observed ECO were, at the same time, detected to have type II open pit pattern, which is known to be a valuable indicator when using magnifying chromoendoscopy. ECO had high sensitivity of 80% for identifying SSA/P, with 62% specificity and 83% positive predictive value (PPV). In detecting the cancer with SSA/P, irregular vessels under magnifying NBI were frequently observed with 100% sensitivity and 99% specificity, 86% PPV and 100% negative predictive value. A focus on irregular vessels in serrated lesions might be useful for identification of cancer with SSA/P. This is an advantage of carrying out magnifying NBI in addition to being used simultaneously with other modalities by switching, and observations can be made by using wash-in water alone. We can carry out advanced examinations for selected lesions with irregular vessels. To confirm cancerous demarcation and invasion depth, a combination of all three aforementioned modalities should be done. © 2016 The Authors Digestive Endoscopy © 2016 Japan Gastroenterological Endoscopy Society.

  11. Developmental and evolutionary novelty in the serrated teeth of theropod dinosaurs.

    Brink, K S; Reisz, R R; LeBlanc, A R H; Chang, R S; Lee, Y C; Chiang, C C; Huang, T; Evans, D C

    2015-07-28

    Tooth morphology and development can provide valuable insights into the feeding behaviour and evolution of extinct organisms. The teeth of Theropoda, the only clade of predominantly predatory dinosaurs, are characterized by ziphodonty, the presence of serrations (denticles) on their cutting edges. Known today only in varanid lizards, ziphodonty is much more pervasive in the fossil record. Here we present the first model for the development of ziphodont teeth in theropods through histological, SEM, and SR-FTIR analyses, revealing that structures previously hypothesized to prevent tooth breakage instead first evolved to shape and maintain the characteristic denticles through the life of the tooth. We show that this novel complex of dental morphology and tissues characterizes Theropoda, with the exception of species with modified feeding behaviours, suggesting that these characters are important for facilitating the hypercarnivorous diet of most theropods. This adaptation may have played an important role in the initial radiation and subsequent success of theropods as terrestrial apex predators.

  12. Chaotic state to self-organized critical state transition of serrated flow dynamics during brittle-to-ductile transition in metallic glass

    Wang, C.; Wang, W. H.; Bai, H. Y., E-mail: hybai@aphy.iphy.ac.cn [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Sun, B. A. [Centre for Advanced Structural Materials, Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Kowloon Tong, Kowloon (Hong Kong)

    2016-02-07

    We study serrated flow dynamics during brittle-to-ductile transition induced by tuning the sample aspect ratio in a Zr-based metallic glass. The statistical analysis reveals that the serrated flow dynamics transforms from a chaotic state characterized by Gaussian-distribution serrations corresponding to stick-slip motion of randomly generated and uncorrelated single shear band and brittle behavior, into a self-organized critical state featured by intermittent scale-free distribution of shear avalanches corresponding to a collective motion of multiple shear bands and ductile behavior. The correlation found between serrated flow dynamics and plastic deformation might shed light on the plastic deformation dynamic and mechanism in metallic glasses.

  13. CpG Island Methylator Phenotype-High Colorectal Cancers and Their Prognostic Implications and Relationships with the Serrated Neoplasia Pathway.

    Rhee, Ye-Young; Kim, Kyung-Ju; Kang, Gyeong Hoon

    2017-01-15

    The concept of a CpG island methylator phenotype (CIMP) was first introduced by Toyota and Issa to describe a subset of colorectal cancers (CRCs) with concurrent hypermethylation of multiple CpG island loci. The concept of CIMP as a molecular carcinogenesis mechanism was consolidated by the identification of the serrated neoplasia pathway, in which CIMP participates in the initiation and progression of serrated adenomas. Distinct clinicopathological and molecular features of CIMP-high (CIMP-H) CRCs have been characterized, including proximal colon location, older age of onset, female preponderance, and frequent associations of high-level microsatellite instability and BRAF mutations. CIMP-H CRCs arise in sessile or traditional serrated adenomas and thus tend to display the morphological characteristics of serrated adenomas, including epithelial serration, vesicular nuclei, and abundant cytoplasm. Both the frequent association of CIMP and poor prognosis and different responses of CRCs to adjuvant therapy depending on CIMP status indicate clinical implications. In this review, we present an overview of the literature documenting the relevant findings of CIMP-H CRCs and their relationships with the serrated neoplasia pathway.

  14. Design and simulation of Macro-Fiber composite based serrated microflap for wind turbine blade fatigue load reduction

    Sun, Xiao; Dai, Qingli; Bilgen, Onur

    2018-05-01

    A Macro-Fiber Composite (MFC) based active serrated microflap is designed in this research for wind turbine blades. Its fatigue load reduction potential is evaluated in normal operating conditions. The force and displacement output of the MFC-based actuator are simulated using a bimorph beam model. The work done by the aerodynamic, centripetal and gravitational forces acting on the microflap were calculated to determine the required capacity of the MFC-based actuator. MFC-based actuators with a lever mechanical linkage are designed to achieve the required force and displacement to activate the microflap. A feedback control scheme is designed to control the microflap during operation. Through an aerodynamic-aeroelastic time marching simulation with the designed control scheme, the time responses of the wind turbine blades are obtained. The fatigue analysis shows that the serrated microflap can reduce the standard deviation of the blade root flapwise bending moment and the fatigue damage equivalent loads.

  15. Assessment of finite element and smoothed particles hydrodynamics methods for modeling serrated chip formation in hardened steel

    Usama Umer

    2016-05-01

    Full Text Available This study aims to perform comparative analyses in modeling serrated chip morphologies using traditional finite element and smoothed particles hydrodynamics methods. Although finite element models are being employed in predicting machining performance variables for the last two decades, many drawbacks and limitations exist with the current finite element models. The problems like excessive mesh distortions, high numerical cost of adaptive meshing techniques, and need of geometric chip separation criteria hinder its practical implementation in metal cutting industries. In this study, a mesh free method, namely, smoothed particles hydrodynamics, is implemented for modeling serrated chip morphology while machining AISI H13 hardened tool steel. The smoothed particles hydrodynamics models are compared with the traditional finite element models, and it has been found that the smoothed particles hydrodynamics models have good capabilities in handling large distortions and do not need any geometric or mesh-based chip separation criterion.

  16. A Serrate-Notch-Canoe complex mediates essential interactions between glia and neuroepithelial cells during Drosophila optic lobe development

    Pérez-Gómez, R.; Slováková, J.; Rives-Quinto, N.; Krejčí, Alena; Carmena, A.

    2013-01-01

    Roč. 126, č. 21 (2013), s. 4873-4884 ISSN 0021-9533 Grant - others:Spanish Government(ES) BFU2009-08833; Spanish Government(ES) BFU2012-33020; Spanish Government(ES) CSD2007-00023 Institutional support: RVO:60077344 Keywords : glia * Serrate- Notch signaling * optic lobe Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 5.325, year: 2013

  17. Identification of risk factors for sessile and traditional serrated adenomas of the colon by using big data analysis.

    Pyo, Jeung Hui; Ha, Sang Yun; Hong, Sung Noh; Chang, Dong Kyung; Son, Hee Jung; Kim, Kyoung-Mee; Kim, Hyeseung; Kim, Kyunga; Kim, Jee Eun; Choi, Yoon-Ho; Kim, Young-Ho

    2018-05-01

    Little is known about the risk factors associated with serrated polyps, because the early studies, which occurred before the new World Health Organization classification was introduced, included mixtures of serrated polyps. This study aimed to evaluate the risk factors associated with the presence of sessile serrated adenomas (SSAs) and traditional serrated adenomas (TSAs) using big data analytics. Using a case-control design, we evaluated the risk factors associated with the presence of SSAs and TSAs. Subjects who underwent colonoscopies from 2002 to 2012 as part of the comprehensive health screening programs undertaken at the Samsung Medical Center, Korea, participated in this study. Of the 48 677 individuals who underwent colonoscopies, 183 (0.4%) had SSAs and 212 (0.4%) had TSAs. The multivariate analysis determined that being aged ≥ 50 years (odds ratio [OR] 1.91, 95% confidential interval [CI] 1.27-2.90, P = 0.002) and a history of colorectal cancer among first-degree relatives (OR 3.14, 95% CI 1.57-6.27, P = 0.001) were significant risk factors associated with the presence of SSAs and that being aged ≥ 50 years (OR 2.61, 95% CI 1.79-3.80, P < 0.001), obesity (OR 1.63, 95% CI 1.12-2.36, P = 0.010), and a higher triglyceride level (OR 1.63, 95% CI 1.12-2.36, P = 0.010) were independent risk factors associated with the presence of TSAs. We used big data analytics to determine the risk factors associated with the presence of specific polyp subgroups, and individuals who have these risk factors should be carefully scrutinized for the presence of SSAs or TSAs during screening colonoscopies. © 2017 Journal of Gastroenterology and Hepatology Foundation and John Wiley & Sons Australia, Ltd.

  18. Annotating and quantifying pri-miRNA transcripts using RNA-Seq data of wild type and serrate-1 globular stage embryos of Arabidopsis thaliana

    Daniel Lepe-Soltero

    2017-12-01

    Full Text Available The genome annotation for the model plant Arabidopsis thaliana does not include the primary transcripts from which MIRNAs are processed. Here we present and analyze the raw mRNA sequencing data from wild type and serrate-1 globular stage embryos of A. thaliana, ecotype Columbia. Because SERRATE is required for pri-miRNA processing, these precursors accumulate in serrate-1 mutants, facilitating their detection using standard RNA-Seq protocols. We first use the mapping of the RNA-Seq reads to the reference genome to annotate the potential primary transcripts of MIRNAs expressed in the embryo. We then quantify these pri-miRNAs in wild type and serrate-1 mutants. Finally, we use differential expression analysis to determine which are up-regulated in serrate-1 compared to wild type, to select the best candidates for bona fide pri-miRNAs expressed in the globular stage embryos. In addition, we analyze a previously published RNA-Seq dataset of wild type and dicer-like 1 mutant embryos at the globular stage [1]. Our data are interpreted and discussed in a separate article [2].

  19. Annotating and quantifying pri-miRNA transcripts using RNA-Seq data of wild type and serrate-1 globular stage embryos of Arabidopsis thaliana.

    Lepe-Soltero, Daniel; Armenta-Medina, Alma; Xiang, Daoquan; Datla, Raju; Gillmor, C Stewart; Abreu-Goodger, Cei

    2017-12-01

    The genome annotation for the model plant Arabidopsis thaliana does not include the primary transcripts from which MIRNAs are processed. Here we present and analyze the raw mRNA sequencing data from wild type and serrate-1 globular stage embryos of A. thaliana , ecotype Columbia. Because SERRATE is required for pri-miRNA processing, these precursors accumulate in serrate-1 mutants, facilitating their detection using standard RNA-Seq protocols. We first use the mapping of the RNA-Seq reads to the reference genome to annotate the potential primary transcripts of MIRNAs expressed in the embryo. We then quantify these pri-miRNAs in wild type and serrate-1 mutants. Finally, we use differential expression analysis to determine which are up-regulated in serrate-1 compared to wild type, to select the best candidates for bona fide pri-miRNAs expressed in the globular stage embryos. In addition, we analyze a previously published RNA-Seq dataset of wild type and dicer-like 1 mutant embryos at the globular stage [1]. Our data are interpreted and discussed in a separate article [2].

  20. Endoscopic detection rate of sessile serrated lesions in Lynch syndrome patients is comparable to an age- and gender-matched control population: case-control study with expert pathology review

    Vleugels, Jasper L. A.; Sahin, Husna; Hazewinkel, Yark; Koens, Lianne; van den Berg, Jose G.; van Leerdam, Monique E.; Dekker, Evelien

    2017-01-01

    Carcinogenesis in Lynch syndrome involves fast progression of adenomas to colorectal cancer (CRC) due to microsatellite instability. The role of sessile serrated lesions (SSLs) and the serrated neoplasia pathway in these patients is unknown. The aim of this matched case-control study was to compare

  1. Clinical outcomes of surveillance colonoscopy for patients with sessile serrated adenoma

    Sung Jae Park

    2018-01-01

    Full Text Available Background/Aims: Sessile serrated adenomas (SSAs are known to be precursors of colorectal cancer (CRC. The proper interval of follow-up colonoscopy for SSAs is still being debated. We sought to determine the proper interval of colonoscopy surveillance in patients diagnosed with SSAs in South Korea. Methods: We retrospectively reviewed the medical records of patients diagnosed with SSAs who received 1 or more follow-up colonoscopies. The information reviewed included patient baseline characteristics, SSA characteristics, and colonoscopy information. Results: From January 2007 to December 2011, 152 SSAs and 8 synchronous adenocarcinomas were identified in 138 patients. The mean age of the patients was 62.2 years and 60.1% patients were men. SSAs were located in the right colon (i.e., from the cecum to the hepatic flexure in 68.4% patients. At the first follow-up, 27 SSAs were identified in 138 patients (right colon, 66.7%. At the second follow-up, 6 SSAs were identified in 65 patients (right colon, 66.7%. At the 3rd and 4th follow-up, 21 and 11 patients underwent colonoscopy, respectively, and no SSAs were detected. The total mean follow-up duration was 33.9 months. The mean size of SSAs was 8.1±5.0 mm. SSAs were most commonly found in the right colon (126/185, 68.1%. During annual follow-up colonoscopy surveillance, no cancer was detected. Conclusions: Annual colonoscopy surveillance is not necessary for identifying new CRCs in all patients diagnosed with SSAs. In addition, the right colon should be examined more carefully because SSAs occur more frequently in the right colon during initial and follow-up colonoscopies.

  2. Leaf Serration in Seedlings of Hetero blastic Woody Species Enhance Plasticity and Performance in Gaps But Not in the Under story

    Gamage, H.K.; Gamage, H.K.

    2010-01-01

    Leaf heteroblasty refers to dramatic ontogenetic changes in leaf size and shape, in contrast to homoblasty that exhibits little change, between seedling and adult stages. This study examined whether the plasticity in leaf morphology of heteroblastic species would be an advantage for their survival and growth over homoblastic congeners to changes in light. Two congeneric pairs of homoblastic (Hoheria lyallii, Aristotelia serrata) and heteroblastic species (H. sexstylosa, A. fruticosa) were grown for 18 months in canopy gap and forest understory sites in a temperate rainforest in New Zealand. Heteroblastic species that initially had serrated leaves reduced leaf serration in the understory, but increased in the gaps. Heteroblastic species also produced thicker leaves and had higher stomatal pore area (density x aperture length), maximum photosynthetic rate, survival, and greater biomass allocation to shoots than homoblastic relatives in the gaps. Findings indicate that increased leaf serration in heteroblastic species is an advantage over homoblastic congeners in high light.

  3. A CpG island methylator phenotype of colorectal cancer that is contiguous with conventional adenomas, but not serrated polyps.

    Hokazono, Koji; Ueki, Takashi; Nagayoshi, Kinuko; Nishioka, Yasunobu; Hatae, Tatsunobu; Koga, Yutaka; Hirahashi, Minako; Oda, Yoshinao; Tanaka, Masao

    2014-11-01

    A subset of colorectal cancers (CRCs) harbor the CpG island methylator phenotype (CIMP), with concurrent multiple promoter hypermethylation of tumor-related genes. A serrated pathway in which CIMP is developed from serrated polyps is proposed. The present study characterized CIMP and morphologically examined precursor lesions of CIMP. In total, 104 CRCs treated between January 1996 and December 2004 were examined. Aberrant promoter methylation of 15 cancer-related genes was analyzed. CIMP status was classified according to the number of methylated genes and was correlated with the clinicopathological features, including the concomitant polyps in and around the tumors. The frequency of aberrant methylation in each CRC showed a bimodal pattern, and the CRCs were classified as CIMP-high (CIMP-H), CIMP-low (CIMP-L) and CIMP-negative (CIMP-N). CIMP-H was associated with aberrant methylation of MLH1 (P=0.005) and with an improved recurrence-free survival (RFS) rate following curative resection compared with CIMP-L/N (five-year RFS rate, 93.8 vs. 67.1%; P=0.044), while CIMP-N tumors were associated with frequent distant metastases at diagnosis (P=0.023). No concomitant serrated lesions were present in the tumors, whereas conventional adenoma was contiguous with 11 (10.6%) of 104 CRCs, including four CIMP-H CRCs. CIMP-H was classified in CRCs by a novel CIMP marker panel and the presence of concomitant tumors revealed that certain CIMP-H CRCs may have arisen from conventional adenomas.

  4. Prevalence, distribution and risk of sessile serrated adenomas/polyps at a center with a high adenoma detection rate and experienced pathologists

    IJspeert, Joep E. G.; de Wit, Koos; van der Vlugt, Manon; Bastiaansen, Barbara A. J.; Fockens, Paul; Dekker, Evelien

    2016-01-01

    Sessile serrated adenomas/polyps (SSA/Ps) are the precursors of 15 % - 30 % of colorectal cancers (CRC). We aimed to determine the prevalence and distribution of SSA/Ps and to evaluate the association between SSA/Ps and the risk of synchronous advanced neoplasia at a high quality colonoscopy center.

  5. Long-Term Impact of the Dutch Colorectal Cancer Screening Program on Cancer Incidence and Mortality-Model-Based Exploration of the Serrated Pathway

    Greuter, Marjolein J. E.; Demirel, Erhan; Lew, Jie-Bin; Berkhof, Johannes; Xu, Xiang-Ming; Canfell, Karen; Dekker, Evelien; Meijer, Gerrit A.; Coupé, Veerle M. H.

    2016-01-01

    We aimed to predict the long-term colorectal cancer incidence, mortality, and colonoscopy demand of the recently implemented Dutch colorectal cancer screening program. The Adenoma and Serrated pathway to Colorectal Cancer model was set up to simulate the Dutch screening program consisting of

  6. HIGLE is a bifunctional homing endonuclease that directly interacts with HYL1 and SERRATE in Arabidopsis thaliana

    Cho, Seok Keun; Ryu, Moon Young; Poulsen, Christian

    2017-01-01

    A highly coordinated complex known as the microprocessor precisely processes primary transcripts of MIRNA genes into mature miRNAs. In plants, the microprocessor minimally consists of three components: Dicer-like protein 1 (DCL1), HYPONASTIC LEAF 1 (HYL1), and SERRATE (SE). To precisely modulate ...

  7. Detection of colorectal serrated polyps by stool DNA testing: comparison with fecal immunochemical testing for occult blood (FIT.

    Russell I Heigh

    Full Text Available Precursors to 1/3 of colorectal cancer (CRC, serrated polyps have been under-detected by screening due to their inconspicuous, non-hemorrhagic, and proximal nature. A new multi-target stool DNA test (multi-target sDNA shows high sensitivity for both CRC and advanced adenomas. Screen detection of serrated polyps by this approach requires further validation. We sought to assess and compare noninvasive detection of sessile serrated polyps (SSP ≥ 1 cm by sDNA and an occult blood fecal immunochemical test (FIT.In a blinded prospective study, a single stool sample used for both tests was collected from 456 asymptomatic adults prior to screening or surveillance colonoscopy (criterion standard. All 29 patients with SSP ≥ 1 cm were included as cases and all 232 with no neoplastic findings as controls. Buffered stool samples were processed and frozen on receipt; Exact Sciences performed sDNA in batches using optimized analytical methods. The sDNA multi-marker panel targets methylated BMP3 (mBMP3 and NDRG4, mutant KRAS, β-actin, and hemoglobin. FIT (Polymedco OC-FIT Check was performed in separate lab ≤ 2 days post defecation and evaluated at cutoffs of 50 (FIT-50 and 100 ng/ml (FIT-100.MEDIAN AGES: cases 61 (range 57-77, controls 62 (52-70, p = NS. Women comprised 59% and 51%, p = NS, respectively. SSP median size was 1.2 cm (1-3 cm, 93% were proximal, and 64% had synchronous diminutive polyps. Among multi-target sDNA markers, mBMP3 proved highly discriminant for detection of SSP ≥ 1 cm (AUC = 0.87, p<0.00001; other DNA markers provided no incremental sensitivity. Hemoglobin alone showed no discrimination (AUC = 0.50, p = NS. At matched specificities, detection of SSP ≥ 1 cm by stool mBMP3 was significantly greater than by FIT-50 (66% vs 10%, p = 0.0003 or FIT-100 (63% vs 0%, p<0.0001.In a screening and surveillance setting, SSP ≥ 1 cm can be detected noninvasively by stool assay of exfoliated DNA markers, especially mBMP3. FIT appears to

  8. Dissection of the complex phenotype in cuticular mutants of Arabidopsis reveals a role of SERRATE as a mediator.

    Derry Voisin

    2009-10-01

    Full Text Available Mutations in LACERATA (LCR, FIDDLEHEAD (FDH, and BODYGUARD (BDG cause a complex developmental syndrome that is consistent with an important role for these Arabidopsis genes in cuticle biogenesis. The genesis of their pleiotropic phenotypes is, however, poorly understood. We provide evidence that neither distorted depositions of cutin, nor deficiencies in the chemical composition of cuticular lipids, account for these features, instead suggesting that the mutants alleviate the functional disorder of the cuticle by reinforcing their defenses. To better understand how plants adapt to these mutations, we performed a genome-wide gene expression analysis. We found that apparent compensatory transcriptional responses in these mutants involve the induction of wax, cutin, cell wall, and defense genes. To gain greater insight into the mechanism by which cuticular mutations trigger this response in the plants, we performed an overlap meta-analysis, which is termed MASTA (MicroArray overlap Search Tool and Analysis, of differentially expressed genes. This suggested that different cell integrity pathways are recruited in cesA cellulose synthase and cuticular mutants. Using MASTA for an in silico suppressor/enhancer screen, we identified SERRATE (SE, which encodes a protein of RNA-processing multi-protein complexes, as a likely enhancer. In confirmation of this notion, the se lcr and se bdg double mutants eradicate severe leaf deformations as well as the organ fusions that are typical of lcr and bdg and other cuticular mutants. Also, lcr does not confer resistance to Botrytis cinerea in a se mutant background. We propose that there is a role for SERRATE-mediated RNA signaling in the cuticle integrity pathway.

  9. Wide-field piecemeal cold snare polypectomy of large sessile serrated polyps without a submucosal injection is safe.

    Tate, David J; Awadie, Halim; Bahin, Farzan F; Desomer, Lobke; Lee, Ralph; Heitman, Steven J; Goodrick, Kathleen; Bourke, Michael J

    2018-03-01

    BACKGROUND AND STUDY AIMS : Large series suggest endoscopic mucosal resection is safe and effective for the removal of large (≥ 10 mm) sessile serrated polyps (SSPs), but it exposes the patient to the risks of electrocautery, including delayed bleeding. We examined the feasibility and safety of piecemeal cold snare polypectomy (pCSP) for the resection of large SSPs.  Sequential large SSPs (10 - 35 mm) without endoscopic evidence of dysplasia referred over 12 months to a tertiary endoscopy center were considered for pCSP. A thin-wire snare was used in all cases. Submucosal injection was not performed. High definition imaging of the defect margin was used to ensure the absence of residual serrated tissue. Adverse events were assessed at 2 weeks and surveillance was planned for between 6 and 12 months.  41 SSPs were completely removed by pCSP in 34 patients. The median SSP size was 15 mm (interquartile range [IQR] 14.5 - 20 mm; range 10 - 35 mm). The median procedure duration was 4.5 minutes (IQR 1.4 - 6.3 minutes). There was no evidence of perforation or significant intraprocedural bleeding. At 2-week follow-up, there were no significant adverse events, including delayed bleeding and post polypectomy syndrome. First follow-up has been undertaken for 15 /41 lesions at a median of 6 months with no evidence of recurrence.  There is potential for pCSP to become the standard of care for non-dysplastic large SSPs. This could reduce the burden of removing SSPs on patients and healthcare systems, particularly by avoidance of delayed bleeding. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Avian botulism type E in waterbirds of Lake Michigan, 2010–2013

    Chipault, Jennifer G.; White, C. LeAnn; Blehert, David S.; Jennings, Susan K.; Strom, Sean M.

    2015-01-01

    During 2010 to 2013, waterbird mortality surveillance programs used a shared protocol for shoreline walking surveys performed June to November at three areas in northern Lake Michigan. In 2010 and 2012, 1244 total carcasses (0.8 dead bird/km walked) and 2399 total carcasses (1.2 dead birds/km walked), respectively, were detected. Fewer carcasses were detected in 2011 (353 total carcasses, 0.2 dead bird/km walked) and 2013 (451 total carcasses, 0.3 dead bird/km walked). During 3 years, peak detection of carcasses occurred in October and involved primarily migratory diving and fish-eating birds, including long-tailed ducks (Clangula hyemalis; 2010), common loons (Gavia immer; 2012), and red-breasted mergansers (Mergus serrator; 2013). In 2011, peak detection of carcasses occurred in August and consisted primarily of summer residents such as gulls (Larus spp.) and double-crested cormorants (Phalacrocorax auritus). A subset of fresh carcasses was collected throughout each year of the study and tested for botulinum neurotoxin type E (BoNT/E). Sixty-one percent of carcasses (57/94) and 10 of 11 species collected throughout the sampling season tested positive for BoNT/E, suggesting avian botulism type E was a major cause of death for both resident and migratory birds in Lake Michigan. The variety of avian species affected by botulism type E throughout the summer and fall during all 4 years of coordinated surveillance also suggests multiple routes for bird exposure to BoNT/E in Lake Michigan.

  11. Distinct features between MLH1-methylated and unmethylated colorectal carcinomas with the CpG island methylator phenotype: implications in the serrated neoplasia pathway.

    Kim, Jung Ho; Bae, Jeong Mo; Cho, Nam-Yun; Kang, Gyeong Hoon

    2016-03-22

    The presence or absence of MLH1 methylation may critically affect the heterogeneity of colorectal carcinoma (CRC) with the CpG island methylator phenotype (CIMP). Here, we investigated the differential characteristics of CIMP-high (CIMP-H) CRCs according to MLH1 methylation status. To further confirm the MLH1-dependent features in CIMP-H CRC, an independent analysis was performed using data from The Cancer Genome Atlas (TCGA). In our CIMP-H CRC samples, MLH1-methylated tumors were characterized by older patient age, proximal colonic location, mucinous histology, intense lymphoid reactions, RUNX3/SOCS1 promoter methylation, BRAF mutations, and microsatellite instability-high (MSI-H) status. By contrast, MLH1-unmethylated tumors were associated with earlier age of onset, increased distal colorectal localization, adverse pathologic features, and KRAS mutations. In the TCGA dataset, the MLH1-silenced CIMP-H CRC demonstrated proximal location, MSI-H status, hypermutated phenotype, and frequent BRAF mutations, but the MLH1-non-silenced CIMP-H CRC was significantly associated with high frequencies of KRAS and APC mutations. In conclusion, the differential nature of CIMP-H CRCs depends primarily on the MLH1 methylation status. Based on the current knowledge, the sessile serrated adenoma/polyp may be the major precursor of MLH1-methylated CIMP-H CRCs, whereas MLH1-unmethylated CIMP-H CRCs may develop predominantly from KRAS-mutated traditional serrated adenomas and less commonly from BRAF-mutated traditional serrated adenomas and/or sessile serrated adenomas/polyps.

  12. Rezultati januarskega štetja vodnih ptic leta 2015 v Sloveniji/ Results of the January 2015 waterbird census in Slovenia

    Božič Luka

    2015-11-01

    Full Text Available In 2015, the International Waterbird Census (IWC was carried out in Slovenia on 17 and 18 Jan. Waterbirds were counted on all larger rivers, along the entire Slovenian Coastland and on most of the major standing waters in the country. During the census, in which 276 observers took part, 409 sections of the rivers and coastal sea with a total length of 1385.8 km and 224 other localities (172 standing waters and 52 streams were surveyed. Altogether, 46,425 waterbirds of 57 species were counted. This is one of the lowest numbers of waterbirds recorded during the 19 years of IWC in Slovenia. The highest numbers of waterbirds were counted in the Drava count area, i.e. 17,014 individuals (36.7% of all waterbirds in Slovenia. By far the most numerous species was Mallard Anas platyrhynchos (45.9% of all waterbirds, followed by Coot Fulica atra (8.4% of all waterbirds, Blackheaded Gull Chroicocephalus ridibundus (7.5% of all waterbirds, Cormorant Phalacrocorax carbo (5.7% of all waterbirds and Mute Swan Cygnus olor (4.6% of all waterbirds. The number of 1000 counted individuals was also surpassed by Tufted Duck Aythya fuligula, Yellow-legged Gull Larus michahellis and Teal An. crecca. Among the rarer recorded species, the Cattle Egret Bubulcus ibis (registered only for the third time during the IWC and Lesser Black-backed Gull Larus fuscus (registered only for the fourth time during the IWC deserve special mention. Also, Ruddy Shelduck Tadorna ferruginea was recorded for the fourth time during the IWC, but the individual observed was classified to category E (introduced species without self-sustaining populations, escapees from captivity. Numbers of the following species were the highest so far recorded during the IWC: Greylag Goose Anser anser, Muscovy Duck Cairina moschata, Shoveler An. clypeata, Goosander Mergus merganser and Common Sandpiper Actitis hypoleucos. The number of Redbreasted Mergansers M. serrator was the lowest so far recorded during the

  13. Dissecting the interactions of SERRATE with RNA and DICER-LIKE 1 in Arabidopsis microRNA precursor processing

    Iwata, Yuji

    2013-08-05

    Efficient and precise microRNA (miRNA) biogenesis in Arabidopsis is mediated by the RNaseIII-family enzyme DICER-LIKE 1 (DCL1), double-stranded RNA-binding protein HYPONASTIC LEAVES 1 and the zinc-finger (ZnF) domain-containing protein SERRATE (SE). In the present study, we examined primary miRNA precursor (pri-miRNA) processing by highly purified recombinant DCL1 and SE proteins and found that SE is integral to pri-miRNA processing by DCL1. SE stimulates DCL1 cleavage of the pri-miRNA in an ionic strength-dependent manner. SE uses its N-terminal domain to bind to RNA and requires both N-terminal and ZnF domains to bind to DCL1. However, when DCL1 is bound to RNA, the interaction with the ZnF domain of SE becomes indispensible and stimulates the activity of DCL1 without requiring SE binding to RNA. Our results suggest that the interactions among SE, DCL1 and RNA are a potential point for regulating pri-miRNA processing. 2013 The Author(s) 2013.

  14. Conventional colon adenomas harbor various disturbances in microsatellite stability and contain micro-serrated foci with microsatellite instability.

    Piotr Lewitowicz

    Full Text Available Colorectal cancer belongs to the most frequent occurring malignancies. A prediction of the clinical outcome and appropriate choice of neoadjuvant chemotherapy needs personalized insight to the main driving pathways. Because most CRCs have polyps as progenitor lesions, studying the pathways driving to adenomagenesis is no less important.Our purpose was the evaluation of microsatellite stability status within conventional colon adenomas and also β-catenin, BRAFV600E and p53 contribution.The cohort included 101 cases of typical colon adenomas with high grade epithelial dysplasia according to WHO. An immunohistochemistry method was used for the depiction of the expression of targeted proteins, as also their heterogeneity.Generally, we noted a 10% frequency of MSI events where MSI-H reached a 5% share occurred within the left colon and rectal polyps. β-catenin nuclear overexpression was noted with a 70% frequency and p53 with close to a 24% frequency. In addition, we found a presence of micro-serration foci more often within tubular adenomas, where focal MSI took place more often. Our results indicate that MSI events occur more often than had been theorized earlier. It results in tumour heterogeneity, more complex underlying pathways and finally ontogenetic molecular-diversity of tumours besides similar occurring histopathological features.

  15. A standardized method to create peripheral nerve injury in dogs using an automatic non-serrated forceps

    Xuhui Wang; Shiting Li; Liang Wan; Xinyuan Li; Youqiang Meng; Ningxi Zhu; Min Yang; Baohui Feng; Wenchuan Zhang; Shugan Zhu

    2012-01-01

    This study describes a method that not only generates an automatic and standardized crush injury in the skull base, but also provides investigators with the option to choose from a range of varying pressure levels. We designed an automatic, non-serrated forceps that exerts a varying force of 0 to 100 g and lasts for a defined period of 0 to 60 seconds. This device was then used to generate a crush injury to the right oculomotor nerve of dogs with a force of 10 g for 15 seconds, resulting in a deficit in the pupil-light reflex and ptosis. Further testing of our model with Toluidine-blue staining demonstrated that, at 2 weeks post-surgery disordered oculomotor nerve fibers, axonal loss, and a thinner than normal myelin sheath were visible. Electrophysiological examination showed occasional spontaneous potentials. Together, these data verified that the model for oculomotor nerve injury was successful, and that the forceps we designed can be used to establish standard mechanical injury models of peripheral nerves.

  16. Two distinct E3 ubiquitin ligases have complementary functions in the regulation of delta and serrate signaling in Drosophila.

    Roland Le Borgne

    2005-04-01

    Full Text Available Signaling by the Notch ligands Delta (Dl and Serrate (Ser regulates a wide variety of essential cell-fate decisions during animal development. Two distinct E3 ubiquitin ligases, Neuralized (Neur and Mind bomb (Mib, have been shown to regulate Dl signaling in Drosophila melanogaster and Danio rerio, respectively. While the neur and mib genes are evolutionarily conserved, their respective roles in the context of a single organism have not yet been examined. We show here that the Drosophila mind bomb (D-mib gene regulates a subset of Notch signaling events, including wing margin specification, leg segmentation, and vein determination, that are distinct from those events requiring neur activity. D-mib also modulates lateral inhibition, a neur- and Dl-dependent signaling event, suggesting that D-mib regulates Dl signaling. During wing development, expression of D-mib in dorsal cells appears to be necessary and sufficient for wing margin specification, indicating that D-mib also regulates Ser signaling. Moreover, the activity of the D-mib gene is required for the endocytosis of Ser in wing imaginal disc cells. Finally, ectopic expression of neur in D-mib mutant larvae rescues the wing D-mib phenotype, indicating that Neur can compensate for the lack of D-mib activity. We conclude that D-mib and Neur are two structurally distinct proteins that have similar molecular activities but distinct developmental functions in Drosophila.

  17. Tumour budding and other prognostic pathological features at invasive margins in serrated colorectal adenocarcinoma: a comparative study with conventional carcinoma.

    García-Solano, José; Conesa-Zamora, Pablo; Trujillo-Santos, Javier; Mäkinen, Markus J; Pérez-Guillermo, Miguel

    2011-12-01

    To assess the incidence of tumour budding (TB), cytoplasmic pseudo-fragments (CyPs), tumour growth pattern (TGP) and peritumoural lymphocytic infiltration (PLI) in a series of serrated adenocarcinoma (SAC) and conventional carcinomas (CCs) of the colorectum in order to ascertain whether such features could explain the worse prognosis of SAC and whether they have prognostic value in SACs. Tumour budding, CyPs, TGP and PLI were evaluated in 81 SACs and 81 matched CCs. Kaplan-Meier survival curves and Cox logistic regression analysis were obtained for histological parameters. SACs had more high-grade (HG) TB (HG-TB) (69.1%), HG-CyPs (47%), infiltrative TGP (42%) and weak PLI (W-PLI) (65.4%) than CCs (40.7%, P = 0.0003; 19.7%, P = 0.0002; 29.7%, P = 0.07; 45.7%, P = 0.0087). SACs with HG-TB (P = 0.017), HG-CyPs (P = 0.045), infiltrating TGP (P TGP (P = 0.047) and W-PLI (P = 0.04) compared with CCs. For SACs, infiltrative TGP and W-PLI were independent prognostic parameters on multivariate analysis, as was location and regional node status. Compared to CC, SAC displayed more HG-TB, HG-CyPs and fewer PLI at the invasive margins and this may account for its poorer clinical outcome. TB, CyPs, TGP and PLI are useful histological prognostic aids in SAC. © 2011 Blackwell Publishing Limited.

  18. BRAF, KRAS and PIK3CA mutations in colorectal serrated polyps and cancer: Primary or secondary genetic events in colorectal carcinogenesis?

    Velho, Sérgia; Moutinho, Cátia; Cirnes, Luís; Albuquerque, Cristina; Hamelin, Richard; Schmitt, Fernando; Carneiro, Fátima; Oliveira, Carla; Seruca, Raquel

    2008-01-01

    BRAF, KRAS and PIK3CA mutations are frequently found in sporadic colorectal cancer (CRC). In contrast to KRAS and PIK3CA mutations, BRAF mutations are associated with tumours harbouring CpG Island methylation phenotype (CIMP), MLH1 methylation and microsatellite instability (MSI). We aimed at determine the frequency of KRAS, BRAF and PIK3CA mutations in the process of colorectal tumourigenesis using a series of colorectal polyps and carcinomas. In the series of polyps CIMP, MLH1 methylation and MSI were also studied. Mutation analyses were performed by PCR/sequencing. Bisulfite treated DNA was used to study CIMP and MLH1 methylation. MSI was detected by pentaplex PCR and Genescan analysis of quasimonomorphic mononucleotide repeats. Chi Square test and Fisher's Exact test were used to perform association studies. KRAS, PIK3CA or BRAF occur in 71% of polyps and were mutually exclusive. KRAS mutations occur in 35% of polyps. PIK3CA was found in one of the polyps. V600E BRAF mutations occur in 29% of cases, all of them classified as serrated adenoma. CIMP phenotype occurred in 25% of the polyps and all were mutated for BRAF. MLH1 methylation was not detected and all the polyps were microsatellite stable. The comparison between the frequency of oncogenic mutations in polyps and CRC (MSI and MSS) lead us to demonstrate that KRAS and PIK3CA are likely to precede both types of CRC. BRAF mutations are likely to precede MSI carcinomas since the frequency found in serrated polyps is similar to what is found in MSI CRC (P = 0.9112), but statistically different from what is found in microsatellite stable (MSS) tumours (P = 0.0191). Our results show that BRAF, KRAS and PIK3CA mutations occur prior to malignant transformation demonstrating that these oncogenic alterations are primary genetic events in colorectal carcinogenesis. Further, we show that BRAF mutations occur in association with CIMP phenotype in colorectal serrated polyps and verified that colorectal serrated

  19. BRAF, KRAS and PIK3CA mutations in colorectal serrated polyps and cancer: Primary or secondary genetic events in colorectal carcinogenesis?

    Schmitt Fernando

    2008-09-01

    Full Text Available Abstract Background BRAF, KRAS and PIK3CA mutations are frequently found in sporadic colorectal cancer (CRC. In contrast to KRAS and PIK3CA mutations, BRAF mutations are associated with tumours harbouring CpG Island methylation phenotype (CIMP, MLH1 methylation and microsatellite instability (MSI. We aimed at determine the frequency of KRAS, BRAF and PIK3CA mutations in the process of colorectal tumourigenesis using a series of colorectal polyps and carcinomas. In the series of polyps CIMP, MLH1 methylation and MSI were also studied. Methods Mutation analyses were performed by PCR/sequencing. Bisulfite treated DNA was used to study CIMP and MLH1 methylation. MSI was detected by pentaplex PCR and Genescan analysis of quasimonomorphic mononucleotide repeats. Chi Square test and Fisher's Exact test were used to perform association studies. Results KRAS, PIK3CA or BRAF occur in 71% of polyps and were mutually exclusive. KRAS mutations occur in 35% of polyps. PIK3CA was found in one of the polyps. V600E BRAF mutations occur in 29% of cases, all of them classified as serrated adenoma. CIMP phenotype occurred in 25% of the polyps and all were mutated for BRAF. MLH1 methylation was not detected and all the polyps were microsatellite stable. The comparison between the frequency of oncogenic mutations in polyps and CRC (MSI and MSS lead us to demonstrate that KRAS and PIK3CA are likely to precede both types of CRC. BRAF mutations are likely to precede MSI carcinomas since the frequency found in serrated polyps is similar to what is found in MSI CRC (P = 0.9112, but statistically different from what is found in microsatellite stable (MSS tumours (P = 0.0191. Conclusion Our results show that BRAF, KRAS and PIK3CA mutations occur prior to malignant transformation demonstrating that these oncogenic alterations are primary genetic events in colorectal carcinogenesis. Further, we show that BRAF mutations occur in association with CIMP phenotype in colorectal

  20. Metallurgical production from North-east of the Iberian Peninsula during III millennium cal. BC: the Bauma del Serrat del Pont (Tortellá, Girona workshop

    Alcalde, Gabriel

    1998-06-01

    Full Text Available We examine the third millennium cal. BC levels from the small rockshelter of Bauma del Serrat del Pont. The site was settled by a small group, building a perishable structure except in the II. 5 level. Some evidence suggests a seasonal occupation of the site. Multidisciplinary research shows a broad spectrum of local resources involved in the dairy life of this people, including those related to metallurgical activity. We find very old tin alloys, plain or bell beaker decorated pot-furnaces (used to smelt copper ores and clay tuyeres.

    Se presentan los resultados de la excavación en los niveles del III milenio cal. AC del pequeño abrigo rocoso de la Bauma del Serrat del Pont. El yacimiento fue ocupado por un grupo pequeño que organizó el espacio interno con una estructura de material perecedero, excepto en el nivel II.5. Algunos datos indican que las ocupaciones pudieron tener un carácter estacional. Los estudios multidisciplinares reconstruyen un aprovechamiento diversificado de recursos locales, entre los que se integran los dedicados a las tareas metalúrgicas. Se documentan aleaciones intencionadas de bronce de gran antigüedad, el empleo de vasijas horno con o sin decoración campaniforme, y toberas de arcilla.

  1. Implementation of an e-learning module improves consistency in the histopathological diagnosis of sessile serrated lesions within a nationwide population screening programme.

    IJspeert, Joep E G; Madani, Ariana; Overbeek, Lucy I H; Dekker, Evelien; Nagtegaal, Iris D

    2017-05-01

    Distinguishing premalignant sessile serrated lesions (SSLs) from hyperplastic polyps (HPs) is difficult for pathologists in daily practice. We aimed to evaluate nationwide variability within histopathology laboratories in the frequency of diagnosing an SSL as compared with an HP within the Dutch population-based screening programme for colorectal cancer and to assess the effect of an e-learning module on interlaboratory consistency. Data were retrieved from the Dutch Pathology Registry from the start of the nationwide population screening programme, January 2014, until December 2015. An obligatory e-learning module was implemented among pathologists in October 2014. The ratio between SSL and HP diagnosis was determined per laboratory. Odds ratios (ORs) for the diagnosis of an SSL per laboratory were compared with the laboratory with the median odds (median laboratory), before and after implementation of the e-learning module. In total, 14 997 individuals with 27 879 serrated polyps were included; 6665 (23.9%) were diagnosed as SSLs, and 21 214 as HPs (76.1%). The ratio of diagnosing an SSL ranged from 5% to 47% (median 23%) within 44 laboratories. Half of the laboratories showed a significantly different OR (range 3.47-0.16) for diagnosing an SSL than the median laboratory. Variability decreased after implementation of the e-learning module (P = 0.02). Of all pathology laboratories, 70% became more consistent with the median laboratory after e-learning implementation. We demonstrated substantial interlaboratory variability in the histopathological diagnosis of SSLs, which significantly decreased after implementation of a structured e-learning module. Widespread implementation of education might contribute to more homogeneous practice among pathologists. © 2016 John Wiley & Sons Ltd.

  2. Endoscopic detection rate of sessile serrated lesions in Lynch syndrome patients is comparable with an age- and gender-matched control population: case-control study with expert pathology review.

    Vleugels, Jasper L A; Sahin, Husna; Hazewinkel, Yark; Koens, Lianne; van den Berg, Jose G; van Leerdam, Monique E; Dekker, Evelien

    2018-05-01

    Carcinogenesis in Lynch syndrome involves fast progression of adenomas to colorectal cancer (CRC) because of microsatellite instability. The role of sessile serrated lesions (SSLs) and the serrated neoplasia pathway in these patients is unknown. The aim of this matched case-control study was to compare endoscopic detection rates and distribution of SSLs in Lynch syndrome patients with a matched control population. We collected data of Lynch syndrome patients with a proven germline mutation who underwent colonoscopy between January 2011 and April 2016 in 2 tertiary referral hospitals. Control subjects undergoing elective colonoscopy from 2011 and onward for symptoms or surveillance were selected from a prospectively collected database. Patients were matched 1:1 for age, gender, and index versus surveillance colonoscopy. An expert pathology review of serrated polyps was performed. The primary outcomes included the detection rates and distribution of SSLs. We identified 321 patients with Lynch syndrome who underwent at least 1 colonoscopy. Of these, 223 Lynch syndrome patients (mean age, 49.3; 59% women; index colonoscopy, 56%) were matched to 223 control subjects. SSLs were detected in 7.6% (95% confidence interval, 4.8-11.9) of colonoscopies performed in Lynch syndrome patients and in 6.7% (95% confidence interval, 4.1-10.8) of control subjects (P = .86). None of the detected SSLs in Lynch syndrome patients contained dysplasia. The detection rate of SSLs in Lynch syndrome patients undergoing colonoscopy is comparable with a matched population. These findings suggest that the role of the serrated neoplasia pathway in CRC development in Lynch syndrome seems to be comparable with that in the general population. Copyright © 2018 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  3. Expresión de los genes Serrate1 y Notch1 durante el desarrollo del tercio medio facial del embrión de pollo.

    Daniel Mauricio Meza Lasso

    2016-01-01

    Full Text Available La vía de señalización Notch se caracteriza por mediar la comunicación célula-célula, regulando diferentes procesos celulares como proliferación, apoptosis y definición del destino celular. Esta vía ha sido implicada en el desarrollo de estructuras craneofaciales como paladar, diente y bóveda craneal. El objetivo de esta investigación fue identificar los patrones de expresión de los genes componentes de la vía Notch, Serrate1 y Notch1, durante el desarrollo del tercio medio facial. Se utilizaron embriones de pollo (Gallus gallus seleccionados de acuerdo a los criterios de Hamilton y Hamburger y sobre los cuales se realizó hibridación in situ con ribosondas marcadas con Digoxigenina (DIG, para luego ser detectadas con anticuerpos Anti-Dig. Los resultados mostraron expresión de los genes evaluados, en las prominencias maxilares (pmx y frontonasal (pfn durante el desarrollo del tercio medio facial. Estos resultados sugieren una probable participación de la vía Notch a través de estos genes, en los diferentes procesos celulares que determinan la morfogénesis y el desarrollo del tercio medio facial.

  4. Limit analysis of narrow support elements in W7-X considering the serration effect of the stress-strain relation at 4 K

    Briani, E.; Gianini, C.; Lucca, F.; Marin, A.; Fellinger, J.; Bykov, V.

    2011-01-01

    The magnet support system of the Wendelstein 7-X (W7-X) fusion stellarator includes challenging components, called Narrow Support Elements (NSEs), placed between the Non Planar Coils (NPCs) at the inboard side and aimed at reducing deformation of the coils. NSEs are small contact elements, with special coating to reduce friction, that have to withstand high compressive and shear forces. The objective of this article is to demonstrate the structural reliability of the NSEs under electromagnetic loading (EML), taking into account in a conservative way the relevant material properties at cryogenic temperatures. To this purpose, an appropriate parametric local Finite Element (FE) model of one highly loaded NSE with its components (pad, pad frame and counter pad) and of a portion of the coils has been developed with ABAQUS code and isotropic elastic-plastic material model with hardening/softening has been used, in order to include the serration effect at 4 K. Different mechanical limit analyses have been performed including consecutive steps of shrink fitting the NSEs in the coils, cooling down to 4 K and gradual increasing of the coil displacements induced by the EML.

  5. Limit analysis of narrow support elements in W7-X considering the serration effect of the stress-strain relation at 4 K

    Briani, E., E-mail: erica.briani@ltcalcoli.it [L.T.Calcoli SaS, Piazza Prinetti 26/B, 23807, Merate (Saint Lucia) (Italy); Gianini, C.; Lucca, F.; Marin, A. [L.T.Calcoli SaS, Piazza Prinetti 26/B, 23807, Merate (Saint Lucia) (Italy); Fellinger, J.; Bykov, V. [MPI fur Plasmaphysik (IPP) Wendelsteinstrasse I, D-17491 Greifswald (Germany)

    2011-10-15

    The magnet support system of the Wendelstein 7-X (W7-X) fusion stellarator includes challenging components, called Narrow Support Elements (NSEs), placed between the Non Planar Coils (NPCs) at the inboard side and aimed at reducing deformation of the coils. NSEs are small contact elements, with special coating to reduce friction, that have to withstand high compressive and shear forces. The objective of this article is to demonstrate the structural reliability of the NSEs under electromagnetic loading (EML), taking into account in a conservative way the relevant material properties at cryogenic temperatures. To this purpose, an appropriate parametric local Finite Element (FE) model of one highly loaded NSE with its components (pad, pad frame and counter pad) and of a portion of the coils has been developed with ABAQUS code and isotropic elastic-plastic material model with hardening/softening has been used, in order to include the serration effect at 4 K. Different mechanical limit analyses have been performed including consecutive steps of shrink fitting the NSEs in the coils, cooling down to 4 K and gradual increasing of the coil displacements induced by the EML.

  6. Evaluación de la reproducibilidad del diagnóstico microscópico del adenoma serrado de sésil de colon Assessing the reproducibility of the microscopic diagnosis of sessile serrated adenoma of the colon

    M. Bustamante-Balén

    2009-04-01

    Full Text Available Introducción: el adenoma serrado sésil (ASS es una lesión descrita recientemente y que puede estar relacionada con el desarrollo de hasta un 15% de los cánceres colorrectales (CCR. Objetivo: determinar la eficacia de los criterios morfológicos para el diagnóstico del ASS evaluando el grado de acuerdo entre patólogos. Material y métodos: se estudió la concordancia entre dos patólogos para el diagnóstico de las lesiones serradas de colon en 195 lesiones (187 pólipos hiperplásicos y 7 adenomas serrados. De cada lesión se recogió el tamaño, la localización, la morfología y la forma de obtención de la muestra. Los dos patólogos eran desconocedores del diagnóstico inicial, las características macroscópicas y la localización de las lesiones. Los posibles diagnósticos fueron: ASS, adenoma serrado tradicional (AST, pólipo hiperplásico (PH, pólipo serrado, adenoma tubular o formas mixtas. Las dudas diagnósticas debían describirse. La concordancia entre los dos observadores se evaluó mediante el índice kappa (κ. También se evaluó la influencia de las variables recogidas de las lesiones en el grado de acuerdo en el diagnóstico. Resultados: el acuerdo global para el diagnóstico histológico fue pobre (κ = 0,14. También lo fue el acuerdo para el diagnóstico de ASS (κ = 0,23. La concordancia para el diagnóstico de ASS mejoró con el tamaño > 5 mm (κ = 0,64 y para la localización proximal (κ = 0,43. Conclusión: en un contexto clínico real, los criterios morfológicos existentes para la identificación del ASS pueden ser de difícil aplicación.Introduction: sessile serrated adenoma (SSA is a recently described lesion that may be related to the development of up to 15% of colorectal cancers (CRCs. Objective: to determine the accuracy of morphological criteria for the diagnosis of SSA by assessing concordance between pathologists. Material and methods: concordance between two pathologists in the diagnosis of

  7. MLH1-93 G/a polymorphism is associated with MLH1 promoter methylation and protein loss in dysplastic sessile serrated adenomas with BRAFV600E mutation.

    Fennell, Lochlan J; Jamieson, Saara; McKeone, Diane; Corish, Tracie; Rohdmann, Megan; Furner, Tori; Bettington, Mark; Liu, Cheng; Kawamata, Futoshi; Bond, Catherine; Van De Pols, Jolieke; Leggett, Barbara; Whitehall, Vicki

    2018-01-05

    Sessile serrated adenomas with BRAF mutation progress rapidly to cancer following the development of dysplasia (SSAD). Approximately 75% of SSADs methylate the mismatch repair gene MLH1, develop mismatch repair deficiency and the resultant cancers have a good prognosis. The remaining SSADs and BRAF mutant traditional serrated adenomas (TSA) develop into microsatellite stable cancers with a poor prognosis. The reason for this dichotomy is unknown. In this study, we assessed the genotypic frequency of the MLH1-93 polymorphism rs1800734 in SSADs and TSAs to determine if the uncommon variant A allele predisposes to MLH1 promoter hypermethylation. We performed genotyping for the MLH1-93 polymorphism, quantitative methylation specific PCR, and MLH1 immunohistochemistry on 124 SSAD, 128 TSA, 203 BRAF mutant CRCs and 147 control subjects with normal colonoscopy. The minor A allele was significantly associated with a dose dependent increase in methylation at the MLH1 promoter in SSADs (p = 0.022). The AA genotype was only observed in SSADs with MLH1 loss. The A allele was also overrepresented in BRAF mutant cancers with MLH1 loss. Only one of the TSAs showed loss of MLH1 and the overall genotype distribution in TSAs did not differ from controls. The MLH1-93 AA genotype is significantly associated with promoter hypermethylation and MLH1 loss in the context of SSADs. BRAF mutant microsatellite stable colorectal cancers with the AA genotype most likely arise in TSAs since the A allele does not predispose to methylation in this context.

  8. Detection rate and predictive factors of sessile serrated polyps in an organised colorectal cancer screening programme with immunochemical faecal occult blood test: the EQuIPE study (Evaluating Quality Indicators of the Performance of Endoscopy).

    Zorzi, Manuel; Senore, Carlo; Da Re, Filippo; Barca, Alessandra; Bonelli, Luigina Ada; Cannizzaro, Renato; de Pretis, Giovanni; Di Furia, Lucia; Di Giulio, Emilio; Mantellini, Paola; Naldoni, Carlo; Sassatelli, Romano; Rex, Douglas K; Zappa, Marco; Hassan, Cesare

    2017-07-01

    To assess detection rate and predictive factors of sessile serrated polyps (SSPs) in organised colorectal cancer (CRC) screening programmes based on the faecal immunochemical test (FIT). Data from a case series of colonoscopies of FIT-positive subjects were provided by 44 Italian CRC screening programmes. Data on screening history, endoscopic procedure and histology results, and additional information on the endoscopy centre and the endoscopists were collected, including the age-standardised and sex-standardised adenoma detection rate (ADR) of the individual endoscopists. The SSP detection rate (SSP-DR) was assessed for the study population. To identify SSP-predictive factors, multilevel analyses were performed according to patient/centre/endoscopist characteristics. We analysed 72 021 colonoscopies, of which 1295 presented with at least one SSP (SSP-DR 1.8%; 95% CI 1.7% to 1.9%). At the per-patient level, SSP-DR was associated with males (OR 1.35; 95% CI 1.17 to 1.54) and caecal intubation (OR 3.75; 95% CI 2.22 to 6.34), but not with the FIT round. The presence of at least one advanced adenoma was more frequent among subjects with SSPs than those without (OR 2.08; 95% CI 1.86 to 2.33). At the per-endoscopist level, SSP-DR was associated with ADR (third vs first ADR quartile: OR 1.55; 95% CI 1.03 to 2.35; fourth vs first quartile: OR 1.89; 95% CI 1.24 to 2.90). The low prevalence of SSPs and the lack of association with the FIT round argue against SSP as a suitable target for FIT-based organised programmes. Strict association of SSP-DR with the key colonoscopy quality indicators, namely caecal intubation rate and high ADR further marginalises the need for SSP-specific quality indicators in FIT-based programmes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  9. Behavioral vs. molecular sources of conflict between nuclear and mitochondrial DNA: The role of male-biased dispersal in a Holarctic sea duck

    Peters, Jeffrey L.; Bolender, Kimberly A.; Pearce, John M.

    2012-01-01

    Genetic studies of waterfowl (Anatidae) have observed the full spectrum of mitochondrial (mt) DNA population divergence, from apparent panmixia to deep, reciprocally monophyletic lineages. Yet, these studies often found weak or no nuclear (nu) DNA structure, which was often attributed to male-biased gene flow, a common behaviour within this family. An alternative explanation for this ‘conflict’ is that the smaller effective population size and faster sorting rate of mtDNA relative to nuDNA lead to different signals of population structure. We tested these alternatives by sequencing 12 nuDNA introns for a Holarctic pair of waterfowl subspecies, the European goosander (Mergus merganser merganser) and the North American common merganser (M. m. americanus), which exhibit strong population structure in mtDNA. We inferred effective population sizes, gene flow and divergence times from published mtDNA sequences and simulated expected differentiation for nuDNA based on those histories. Between Europe and North America, nuDNA ФST was 3.4-fold lower than mtDNA ФST, a result consistent with differences in sorting rates. However, despite geographically structured and monophyletic mtDNA lineages within continents, nuDNA ФST values were generally zero and significantly lower than predicted. This between- and within-continent contrast held when comparing mtDNA and nuDNA among published studies of ducks. Thus, male-mediated gene flow is a better explanation than slower sorting rates for limited nuDNA differentiation within continents, which is also supported by nonmolecular data. This study illustrates the value of quantitatively testing discrepancies between mtDNA and nuDNA to reject the null hypothesis that conflict simply reflects different sorting rates.

  10. Serrated flow behavior in tungsten heavy alloy

    Das, Jiten, E-mail: das.jiten@gmail.com; Sankaranarayana, M.; Nandy, T.K.

    2015-10-14

    Flow behavior of a tungsten heavy alloy of composition, 90.5 wt% W–7.1 wt% Ni–1.65 wt% Fe–0.5 wt% Co–0.25 wt% Mo was investigated in a temperature range of 223–973 K and strain rate range of 10{sup −5}–10{sup −2} s{sup −1}. In the temperature range of 773–873 K, the stress strain curves were characterized by jerky flow pointing towards Dynamic Strain Ageing (DSA)/Portevin Le-Chatelier's (PLC) effect. Characteristics of DSA were analyzed in detail. Based on the value of activation energy determined from the critical strain method, diffusion of interstitials (carbon, oxygen, nitrogen and hydrogen) were thought to be responsible for the DSA effect. The results were discussed in relation to information existing in this area in tungsten heavy alloys. The study of fracture surface of tensile tested samples (in the range of 823–973 K) showed that the fractographic features, mostly intergranular, predominantly govern the overall ductility of the alloy and do not change except for surface oxidation at relatively higher temperatures.

  11. Vulnerability of birds to climate change in California's Sierra Nevada

    Rodney B. Siegel

    2014-06-01

    Full Text Available In a rapidly changing climate, effective bird conservation requires not only reliable information about the current vulnerability of species of conservation concern, but also credible projections of their future vulnerability. Such projections may enable managers to preempt or reduce emerging climate-related threats through appropriate habitat management. We used NatureServe's Climate Change Vulnerability Index (CCVI to predict vulnerability to climate change of 168 bird species that breed in the Sierra Nevada mountains of California, USA. The CCVI assesses species-specific exposure and sensitivity to climate change within a defined geographic area, through the integration of (a species' range maps, (b information about species' natural history traits and ecological relationships, (c historic and current climate data, and (d spatially explicit climate change projections. We conducted the assessment under two different downscaled climate models with divergent projections about future precipitation through the middle of the 21st century. Assessments differed relatively little under the two climate models. Of five CCVI vulnerability ranking categories, only one species, White-tailed Ptarmigan (Lagopus leucura, received the most vulnerable rank, Extremely Vulnerable. No species received the second-highest vulnerability ranking, Highly Vulnerable. Sixteen species scored as Moderately Vulnerable using one or both climate models: Common Merganser (Mergus merganser, Osprey (Pandion haliaetus, Bald Eagle (Haliaeetus leucocephalus, Northern Goshawk (Accipiter gentilis, Peregrine Falcon (Falco peregrinus, Prairie Falcon (Falco mexicanus, Spotted Sandpiper (Actitis macularius, Great Gray Owl (Strix nebulosa, Black Swift (Cypseloides niger, Clark's Nutcracker (Nucifraga columbiana, American Dipper (Cinclus mexicanus, Swainson's Thrush (Catharus ustulatus, American Pipit (Anthus rubescens, Gray-crowned Rosy-Finch (Leucosticte tephrocotis, Pine Grosbeak

  12. The occurrence of waterfowl in the biotest basin at the Forsmark nuclear power plant, Sweden, 1981-1984

    Sandstroem, U.

    1985-01-01

    During the period Sep 1981 to Aug 1984 a monthly census was taken of waterfowl in the Biotest basin and its surroundings at Forsmark, as well as in a reference area in the region. During the same period the staff of the Biotest basin made weekly censuses of the basin. The aim of the censuses was to establish if there was any increase in the number of waterfowl in the Biotest basin and its surroundings caused by the discharge of cooling water from the two nuclear power reactors that are in operation in Forsmark. Seventeen waterfowl species were observed in the area during the period studied. Of these species five were regularly observed viz.: the Mute Swan (Cygnus olor), the Mallard (Anas plathyryncos), the Tufted Duck (Aythya fuligula), the Goldeneye (Bucephala clangula) and the Goosander (Mergus merganser). The first four species were generally found in low numbers in the Biotest basin and its surroundings, as well as in the reference area. This implies that the Biotest basin and its surroundings has not become an area of importance during the winter for waterfowl, with one exception: the Goosander. The Goosander showed an increasing population growth in the Biotest basin and its surroundings during the studied period with a maximum average in in the basin during the last winter. As a result, the size of the Goosander population may affect the number of small fish in the Biotest basin. (author)

  13. Ducks change wintering patterns due to changing climate in the important wintering waters of the Odra River Estuary

    Dominik Marchowski

    2017-07-01

    Full Text Available Some species of birds react to climate change by reducing the distance they travel during migration. The Odra River Estuary in the Baltic Sea is important for wintering waterfowl and is where we investigated how waterbirds respond to freezing surface waters. The most abundant birds here comprise two ecological groups: bottom-feeders and piscivores. Numbers of all bottom-feeders, but not piscivores, were negatively correlated with the presence of ice. With ongoing global warming, this area is increasing in importance for bottom-feeders and decreasing for piscivores. The maximum range of ice cover in the Baltic Sea has a weak and negative effect on both groups of birds. Five of the seven target species are bottom-feeders (Greater Scaup Aythya marila, Tufted Duck A. fuligula, Common Pochard A. ferina, Common Goldeneye Bucephala clangula and Eurasian Coot Fulica atra, and two are piscivores (Smew Mergellus albellus and Goosander Mergus merganser. Local changes at the level of particular species vary for different reasons. A local decline of the Common Pochard may simply be a consequence of its global decline. Climate change is responsible for some of the local changes in the study area, disproportionately favoring some duck species while being detrimental to others.

  14. An evaluation of marine bird population trends following the Exxon Valdez oil spill, Prince William Sound, Alaska

    Lance, Brian K.; Irons, David B.; Kendall, Steven J.; McDonald, Lyman L.

    2001-01-01

    We examined post-spill trends (1989-1998) of marine bird populations in Prince William Sound (PWS) following the Exxon Valdez oil spill (EVOS) to evaluate recovery of injured taxa. Two criteria were employed. First, we examined population trends of injured taxa only in the oiled area of PWS using regression models. Second, we examined population trends of injured taxa in the oiled area relative to the unoiled area using homogeneity of the slopes tests. We considered a population recovering if there was a positive trend using either criteria. We considered a population not recovering if there was no trend using either criteria or a negative trend in the oiled area. A significant negative trend in the oiled area relative to the unoiled area was considered a continuing and increasing effect. Most taxa for which injury was previously demonstrated were not recovering and some taxa showed evidence of increasing effects nine years after the oil spill. Four taxa (loons Gavia spp, Harlequin Duck Histrionicus histrionicus, Bufflehead Bucephala spp, and North-western Crow Corvus caurinus) showed weak to very weak evidence of recovery. None of these taxa showed positive trends in both winter and summer. Nine taxa (grebes Podiceps spp, cormorants Phalacrocorax spp, Black Oystercatcher Haematopus bachmani, Mew Gull Larus canus, Glaucous-winged Gull Larus glaucescens, terns Sterna spp, murres Uria spp, Pigeon Guillemot Cepphus columba, and murrelets Brachyramphus spp) showed no evidence of recovery during summer or winter. Four taxa (scoters Melanitta spp, mergansers Mergus spp, goldeneyes Bucephala spp, and Black-legged Kittiwake Rissa tridactyla) showed evidence of continuing, increasing effects. We showed evidence of slow recovery, lack of recovery, and divergent population trends in many taxa which utilise shoreline and nearshore habitats where oil is likely to persist. Potential lingering spill effects and natural variability appear to be acting in concert in delaying

  15. The status of sea ducks in the North Pacific Rim: Toward their conservation and management

    Goudie, R. Ian; Brault, Solange; Conant, Bruce; Kondratyev, Alexander V.; Petersen, Margaret R.; Vermeer, Kees; McCabe, Richard E.; Wadsworth, Kelly G.

    1994-01-01

    Sea ducks (tribe Mergini after Johnsgard 1960) are the most northerly distributed ducks, and species diversity is greatest in the North Pacific. They exploit a diversity of inshore and offshore marine habitats during the non-breeding season, and their use of habitat during breeding varies from coastal through freshwater wetlands of the tundra and taiga (Figure 1, Appendix 1). Non-breeding cohorts frequent marine habitats most of the year. Sea ducks thus are important indicators of the quality of freshwater and marine ecosystems of northern biomes.Of the 17 species discussed in this manuscript, at least 3 are reported to be declining (Appendix 2). However, the basis for many of those assessments is equivocal because there has been little effort to monitor populations. The efforts to more precisely assess their status point to catastrophic declines (Kertell 1991, Stehn et a 1993). Conservation problems related to sea ducks have a long history throughout the Holarctic. For example, the Labrador duck (Camptorhynchus labradorius) became extinct in 1875. (Phillips 1925); common eiders (Somateria mollissima) declined seriously throughout the northern hemisphere (Townsend 1914, Phillips 1925, Doughty 1979); harlequin ducks (Histrionicus histrionicus) experienced declines in Iceland and Greenland (Gudmundsson1971, Salomonson 1950), and more recently have been designated endangered in eastern Canada (Committee On the Status of Endangered Wildlife in Canada 1990). In Russia, all species of eider and harlequin ducks have been closed to sport hunting since 1981, and the Chinese mergansers (Mergus squamatus) presently are extremely rare and fully protected, i.e. category one of the red book (Solomonov 1987).

  16. The expression and mutation of β-catenin in colorectal traditional serrated adenomas

    Xiaojun Dai

    2012-01-01

    Full Text Available Context : Exon 3 mutation of β-catenin is associated with the carcinogenesis. Aims: In this study we aimed to detect the expression of exon 3 mutations of β-catenin in colorectal TSA, TA/VTA, and CRC. Materials and Methods : Immunohistochemistry staining for β-catenin was performed for 30 TSA, 20 tubular adenomas (TA/villous tubular adenomas (VTA, and 21 colorectal carcinoma (CRC cases. DNA sequencing of the exon 3 of β-catenin gene was performed for 8 TSA cases, 6 TA cases, 5 VTA cases, and 10 CRC cases with positive staining in the nuclei and cytoplasm. Statistical Analysis: A Fisher exact test and chi-square test were used to analyze the differentiations of the expression of β-catenin in TSA, TA/VTA, and CRC. Results : The percentages of β-catenin expression in TSA, TA/VTA, and CRC were 76.6% (23/30, 70.0% (14/20, and 95.2% (20/21, respectively, and were significantly different among these three types of tissue specimens (χ2 = 22.805, P < 0.001. Although β-catenin expression levels in TSA were not related to it in TA/VTA, they were significantly different between TSA/TA/VTA and CRC. The degree of dysplasia was well correlated with β-catenin expression (TSA: P < 0.01; TA/VTA: P < 0.05. But β-catenin exon 3 mutations were not detected in any of these tissue specimens. Conclusions : Aberrant β-catenin expression is associated with the degree of dysplasia in TSA. β-catenin likely plays an important role in the pathogenesis of colorectal TSA and conventional adenomas.

  17. W/M serrated osteotomy for infantile Blount's disease in Ghana ...

    2015-10-30

    Oct 30, 2015 ... surgical treatment is well suited for developing countries. This study describes .... with infantile Blount's are included for analysis. In this study, we are ... To increase the stability of the osteotomy, the teeth had to be pointed (at ...

  18. Performance Testing Of A Modified Centrifugal Fan With Serrated Blade Impeller

    Zaimar; Mursalim; H. Abbas; Supratomo

    2017-01-01

    Changes of shape dimension and component part of impeller might change of characteristic fluid flow so that pressure static in the fan housing changed. Changing some geometric characteristics of the centrifugal fan has more efficiency taking with energy crises into consideration. Several factors that can affect fan performance namely design and type size rotation speed air condition or gas through a fan operating point on the nature of the relationship between a volume of air flow and pressur...

  19. Results of the January 2017 waterbird census in Slovenia

    Božič Luka

    2017-12-01

    Full Text Available In 2017, the International Waterbird Census (IWC was carried out in Slovenia on January 14 and 15. Waterbirds were counted on all larger rivers, along the entire Slovenian Coastland and on most of the major standing waters in the country. During the census, in which 235 observers took part, 413 sections of the rivers and coastal sea with a total length of 1,427 km and 200 other localities (164 standing waters and 36 streams were surveyed. The census was characterized by harsh winter conditions and high proportion of frozen water bodies. Altogether, 51,790 waterbirds of 61 species were counted. Thus, the number of waterbirds and the number of species recorded were close to the 21-year average. The highest numbers of waterbirds were counted in the Drava count area, i.e. 20,064 individuals (38.7% of all waterbirds in Slovenia. By far the most numerous species was Mallard Anas platyrhynchos (46.1% of all waterbirds, followed by Coot Fulica atra (6.8% of all waterbirds, Cormorant Phalacrocorax carbo (5.9% of all waterbirds, Black-headed Gull Chroicocephalus ridibundus (5.7% of all waterbirds and Mute Swan Cygnus olor (3.9% of all waterbirds. The number of 1,000 counted individuals was also surpassed by Yellow-legged Gull Larus michahellis, Teal An. crecca, Tufted Duck Aythya fuligula, White-fronted Goose Anser albifrons, Pygmy Cormorant P. pygmeus and Grey Heron Ardea cinerea. Among the rarer recorded species, the Red-breasted Goose Branta ruficollis (registered for the first time during the January Waterbird Censuses and only for the third time ever in Slovenia and Barnacle Goose Branta leucopsis (the first probable A category individual for IWC and Slovenia deserve special mention. Numbers of the following species were the highest so far recorded during the IWC: Mandarin Duck Aix galericulata (together with 2006 and 2012, Pintail An. acuta, Ferruginous Duck Ay. nyroca, Long-tailed Duck Clangula hyemalis (together with 2003, Goosander Mergus

  20. Dissecting the interactions of SERRATE with RNA and DICER-LIKE 1 in Arabidopsis microRNA precursor processing

    Iwata, Yuji; Takahashi, Masateru; Fedoroff, Nina V.; Hamdan, Samir

    2013-01-01

    ). In the present study, we examined primary miRNA precursor (pri-miRNA) processing by highly purified recombinant DCL1 and SE proteins and found that SE is integral to pri-miRNA processing by DCL1. SE stimulates DCL1 cleavage of the pri-miRNA in an ionic strength

  1. A role for HB-EGF/EGFR and MAPK signaling in the development of intestinal serrated polyps in mice

    Bongers, G.M.; Muniz, L. R.; Pacer, M.; Thirunarayanan, N.; Smit, M.J.; Reddy, E.P.; Mayer, L.; Furtado, G.C.; Harpaz, N.; Lira, SA

    2012-01-01

    BACKGROUND & AIMS: Epithelial cancers can be initiated by activating mutations in components of the mitogen-activated protein kinase signaling pathway such as v-raf murine sarcoma viral oncogene homolog B1 (BRAF), v-Ki-ras2 Kirsten rat sarcoma viral oncogene homolog (KRAS), or epidermal growth

  2. Abundance, Distribution and Estimated Consumption (kg fish) of Piscivorous Birds Along the Yakima River, Washington State; Implications for Fisheries Management, 2002 Annual Report.

    Major, III, Walter; Grassley, James M.; Ryding, Kristen E. (University of Washington, Quantitive Ecology Program, Seattle, WA)

    2003-05-01

    This report is divided into two chapters. The abstract for chapter one is--Understanding of the abundance and spatial and temporal distributions of piscivorous birds and their potential consumption of fish is an increasingly important aspect of fisheries management. During 1999-2002, we determined the abundance and distribution and estimated the maximum consumption (kg biomass) of fish-eating birds along the length of the Yakima River in Washington State. Sixteen different species were observed during the 4-yr study, but only half of those were observed during all years. Abundance and estimated consumption of fish within the upper and middle sections of the river were dominated by common mergansers (Mergus merganser) which are known to breed in those reaches. Common mergansers accounted for 78 to 94% of the estimated total fish take for the upper river or approximately 28,383 {+-} 1,041 kg over the 4 yrs. A greater diversity of avian piscivores occurred in the lower river and potential impacts to fish populations was more evenly distributed among the species. In 1999-2000, great blue herons potentially accounted for 29 and 36% of the fish consumed, whereas in 2001-2002 American white pelicans accounted for 53 and 55%. We estimated that approximately 75,878 {+-} 6,616 kg of fish were consumed by piscivorous birds in the lower sections of the river during the study. Bird assemblages differed spatially along the river with a greater abundance of colonial nesting species within the lower sections of the river, especially during spring and the nesting season. The abundance of avian piscivores and consumption estimates are discussed within the context of salmonid supplementation efforts on the river and juvenile out-migration. The abstract for chapter two is--Consumption of fish by piscivorous birds may be a significant constraint on efforts to enhance salmonid populations within tributaries to the Columbia River in Washington State. During 1999-2002, we determined the

  3. Colorectal polyps

    Intestinal polyps; Polyps - colorectal; Adenomatous polyps; Hyperplastic polyps; Villous adenomas; Serrated polyp; Serrated adenoma; Precancerous polyps; Colon cancer - polyps; Bleeding - colorectal polyps

  4. Low sensitivity of type VII collagen enzyme-linked immunosorbent assay in epidermolysis bullosa acquisita : serration pattern analysis on skin biopsy is required for diagnosis

    Terra, J. B.; Jonkman, M. F.; Diercks, G. F. H.; Pas, H. H.

    BackgroundThe type VII collagen (coll VII) enzyme-linked immunosorbent assay (ELISA) has been reported to have high sensitivity (>93%) and specificity (>96%) for diagnosing epidermolysis bullosa acquisita (EBA) in patients who are seropositive on indirect immunofluorescence on salt-split skin (SSS).

  5. Portevin-Le Chatelier effect in a Ni–Cr–Mo alloy containing ordered phase with Pt{sub 2}Mo-type structure at room temperature

    Yuan, Liang, E-mail: yuanliang031@163.com [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Hu, Rui, E-mail: rhu@nwpu.edu.cn [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Li, Jinshan [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072 (China); Zhang, Xiaoqing; Yang, Yan’an [Xi’an Filter Metal Materials Co., Ltd., Xi’an 710072 (China)

    2016-01-05

    Serrated flow behavior or the Portevin-Le Chatelier (PLC) effect in a Ni–Cr–Mo alloy containing ordered phase was investigated at uniaxial tensile and nanoindentation tests at room temperature. Results demonstrate that the periodic arrangement of atoms for nano-sized ordered phase with Pt{sub 2}Mo-type structure obtained by ageing treatment at 600 °C, induces the appearance of an embedded serration (a small serration is embedded in two adjacent large serrations) in the alloy during uniaxial tensile tests at room temperature with strain rates of 10{sup −3} and 10{sup −4} s{sup −1}. The behavior characteristic of small serration is almost independent on strain rate, but that of large serration is significantly dependent on strain rate. Both the stress drop (Δσ) of the large serration and the interval (t{sub w}) between adjacent large serrations increase with decreasing strain rate from 10{sup −3} to 10{sup −4} s{sup −1}. Moreover, a single serration also appears in load-displacement curve of aged sample at loading rate of 10{sup −3} s{sup −1}. Both formation of order-disorder transformation-induced twins and twinning of ordered phase itself are responsible for the occurrence of the embedded serrations.

  6. 75 FR 81793 - Endangered and Threatened Wildlife and Plants; Listing Seven Brazilian Bird Species as Endangered...

    2010-12-28

    ... northeastern Argentina (Morellato and Haddad 2000, pp. 786-787; Conservation International 2007a, p. 1; H[ouml... and Life History The black-hooded antwren inhabits lush understories of remnant old- growth and early... and Life History The Brazilian merganser is highly adapted to mountainous, highly oxygenated clear...

  7. Aerodynamic sound from a sawtooth plate with different thickness ...

    Acoustic performance of an airfoil can be improved with the serrated leading or trailing edge. A sawtooth plate is one of the serration shapes. In this study, the effect of sawtooth plate thickness on the aerodynamically generated noise in wake-sawtooth plate interaction at a Reynolds number of 150 is numerically investigated ...

  8. KSC-04PD-0045

    2004-01-01

    KENNEDY SPACE CENTER, FLA. -- Three male and one female hooded mergansers swim in the quicksilver water of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. Usually found from Alaska and Canada south to Nebraska, Oregon and Tennessee, hooded mergansers winter south to Mexico and the Gulf Coast, including KSC. The open water of the refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

  9. Crassulaceae

    Backer, C.A.

    1948-01-01

    Herbs or undershrubs, usually succulent, perennial, less often annual or biennial. Leaves spirally arranged, opposite or whorled, exstipulate, simple or compound, entire, dentate, crenate, serrate or deeply incised. Flowers ♀, rarely unisexual, actinomorphic, usually cymose or cymose-paniculate,

  10. Continuum Models for Irregular Phase Boundary Motion in Shape-Memory Tensile Bars

    Rosakis, Phoebus

    1997-01-01

    ... observed experimentally. We show that when the model involves a kinetic relation that is 'unstable' in a definite sense, 'stick-slip' motion of the interface between phases and serration of the accompanying stress-elongation...

  11. SAJS SAJS

    2009-05-25

    May 25, 2009 ... indicated for all patients with clinical evidence of significant ... BOWA is the intelligent electro-surgical unit for advanced procedures of all ... coated metal spiral and ergonomic hangle design with serrated oval cup design.

  12. Development of an Index to Bird Predation of Juvenile Salmonids within the Yakima River, 2001 Annual Report.

    Major, III, Walter; Grue, Christian E.; Ryding, Kristen E. (University of Washington, School of Aquatic and Fishery Sciences, Seattle, WA)

    2002-08-01

    Avian predation of fish is suspected to contribute to the loss of out-migrating juvenile salmonids in the Yakima Basin, potentially constraining natural and artificial production. In 1997 and 1998, the Yakima/ Klickitat Fisheries Project (YKFP)--whose goal is increasing natural production within the Yakima River--initiated investigations to assess the feasibility of developing an index to avian predation of juvenile salmon within the river. This research confirmed that Ring-billed Gulls and Common Mergansers were the primary avian predators of juvenile salmon (Phinney et al. 1998), and that under certain conditions could significantly impact migrating smolt populations. Beginning in 1999, the Washington Cooperative Fish and Wildlife Research Unit (WACFWRU) was asked by the YKFP to continue development of avian consumption indices. Monitoring methods developed by Phinney et al. (1998) were adopted (with modifications) and monitoring of impacts to juvenile salmon along river reaches and at areas of high predator/prey concentrations (colloquially referred to as ''hotspots'') has continued each year through 2001. In 2001, piscivorous birds were counted from river banks at hotspots and from a raft or drift boat along river reaches. Consumption by gulls at hotspots was based on direct observations of foraging success and modeled abundance; consumption by all other piscivorous birds was estimated using published dietary requirements and modeled abundance. Seasonal patterns of avian piscivore abundance were identified, diurnal patterns of gull abundance at hotspots were identified, and predation indices were calculated for hotspots and river reaches (for both spring and summer). Changes in survey methods in 2001 included the addition of surveys in the ''Canyon'' reach during spring and altering the method of directly measuring gull feeding rates at hotspots. Primary avian predators in 2001 were &apos

  13. Development of an Index to Bird Predation of Juvenile Salmonids within the Yakima River, 1999 Annual Report.

    Gassley, James M.; Grue, Christian E. (University of Washington, School of Aquatic and Fishery Sciences, Seattle, WA)

    2001-10-01

    Avian predation of fish is suspected to contribute to the loss of juvenile spring chinook salmon in the Yakima Basin, potentially constraining natural production. In 1997 and 1998, the Yakama/Klickitat Fisheries Project (YKFP) and the Washington Department of Fish and Wildlife (WDFW)--whose goal is to increase natural production historically present within the Yakima River--initiated investigations to assess the feasibility of developing an index to avian predation of juvenile salmon within the river. This research--conducted by Dr. Steve Mathews and David Phinney of the University of Washington--confirmed that Ring-billed Gulls and Common Mergansers were the primary avian predators of juvenile salmon, and that under certain conditions could significantly impact migrating smolt populations. Beginning in 1999, the Washington Cooperative Fish and Wildlife Research Unit was asked by the YKFP and the WDFW to continue development of avian consumption indices. Monitoring methods developed by Mathews and Phinney were adopted (with modifications) and monitoring of impacts to juvenile salmon along river reaches and at areas of high predator/prey concentrations (colloquially referred to as ''hotspots'') continued. New efforts initiated in 1999 included piscivorous bird surveys at smolt acclimation sites operated by the Yakama Nation, monitoring of the North Fork Teanaway River for changes in avian piscivore abundance associated with the installation of the Jack Creek acclimation facility, and aerial surveys seeking to identify avian piscivores along the length of the Yakima River. In 1999, piscivorous birds were counted from river banks at hotspots and from a raft or drift boat along river reaches. Consumption by gulls was based on direct observations of foraging success and modeled abundance; consumption by Common Mergansers (which forage underwater) was estimated using published dietary requirements and modeled abundance. A second-order polynomial

  14. Detection of up to 65% of Precancerous Lesions of the Human Colon and Rectum by Mutation Analysis of APC, K-Ras, B-Raf and CTNNB1

    Schneider, Mandy; Scholtka, Bettina; Gottschalk, Uwe; Faiss, Siegbert; Schatz, Daniela; Berghof-Jäger, Kornelia; Steinberg, Pablo

    2010-01-01

    In the present study a recently conceived 4-gene marker panel covering the Wnt and Ras-Raf-MEK-MAPK signaling pathways was used to analyze 20 colorectal serrated lesions and 41 colorectal adenoma samples and to determine the percentage of each of the above-mentioned potentially precancerous lesions carrying at least one of the four above-mentioned genes in a mutated form. CTNNB1 and B-Raf were screened by PCR-single-strand conformation polymorphism analysis, K-Ras by restriction fragment length polymorphism analysis and the APC gene mutation cluster region (codons 1243–1567) by direct DNA sequencing. APC mutations were only detected in 10% of the serrated lesions but in 34% of the adenomas. Twenty percent of the serrated lesions and 14% of the adenomas carried a mutated K-Ras. B-Raf was found to be mutated in 50% of the serrated lesions and in 22% of the adenomas. CTNNB1 was altered in 12% of the adenomas, but not in serrated lesions. By using the above gene marker panel it could be shown that 65% of the serrated lesions and 61% of the adenomas carried at least one of the four genes in a mutated form. Based on its excellent performance in detecting mutations in sporadic preneoplastic (in this study) and neoplastic lesions (in a previous study) of the human colon and rectum, this primer combination might also be suited to efficiently and non-invasively detect genetic alterations in stool DNA of patients with early colorectal cancer

  15. Influence of post pattern and resin cement curing mode on the retention of glass fibre posts.

    Poskus, L T; Sgura, R; Paragó, F E M; Silva, E M; Guimarães, J G A

    2010-04-01

    To evaluate the influence of post design and roughness and cement system (dual- or self-cured) on the retention of glass fibre posts. Two tapered and smooth posts (Exacto Cônico No. 2 and White Post No. 1) and two parallel-sided and serrated posts (Fibrekor 1.25 mm and Reforpost No. 2) were adhesively luted with two different resin cements--a dual-cured (Rely-X ARC) and a self-cured (Cement Post)--in 40 single-rooted teeth. The teeth were divided into eight experimental groups (n = 5): PFD--Parallel-serrated-Fibrekor/dual-cured; PRD--Parallel-serrated-Reforpost/dual-cured; TED--Tapered-smooth-Exacto Cônico/dual-cured; TWD--Tapered-smooth-White Post/dual-cured; PFS--Parallel-serrated-Fibrekor/self-cured; PRS--Parallel-serrated-Reforpost/self-cured; TES--Tapered-smooth-Exacto Cônico/self-cured; TWS--Tapered-smooth-White Post/self-cured. The specimens were submitted to a pull-out test at a crosshead speed of 0.5 mm min(-1). Data were analysed using analysis of variance and Bonferroni's multiple comparison test (alpha = 0.05). Pull-out results (MPa) were: PFD = 8.13 (+/-1.71); PRD = 8.30 (+/-0.46); TED = 8.68 (+/-1.71); TWD = 9.35 (+/-1.99); PFS = 8.54 (+/-2.23); PRS = 7.09 (+/-1.96); TES = 8.27 (+/-3.92); TWS = 7.57 (+/-2.35). No statistical significant difference was detected for posts and cement factors and their interaction. The retention of glass fibre posts was not affected by post design or surface roughness nor by resin cement-curing mode. These results imply that the choice for serrated posts and self-cured cements is not related to an improvement in retention.

  16. Adenoma detection in patients undergoing a comprehensive colonoscopy screening

    Raju, Gottumukkala S; Vadyala, Vikram; Slack, Rebecca; Krishna, Somashekar G; Ross, William A; Lynch, Patrick M; Bresalier, Robert S; Hawk, Ernest; Stroehlein, John R

    2013-01-01

    Measures shown to improve the adenoma detection during colonoscopy (excellent bowel preparation, cecal intubation, cap fitted colonoscope to examine behind folds, patient position change to optimize colon distention, trained endoscopy team focusing on detection of subtle flat lesions, and incorporation of optimum endoscopic examination with adequate withdrawal time) are applicable to clinical practice and, if incorporated are projected to facilitate comprehensive colonoscopy screening program for colon cancer prevention. To determine adenoma and serrated polyp detection rate under conditions designed to optimize quality parameters for comprehensive screening colonoscopy. Retrospective analysis of data obtained from a comprehensive colon cancer screening program designed to optimize quality parameters. Academic medical center. Three hundred and forty-three patients between the ages of 50 years and 75 years who underwent first screening colonoscopy between 2009 and 2011 among 535 consecutive patients undergoing colonoscopy. Comprehensive colonoscopy screening program was utilized to screen all patients. Cecal intubation was successful in 98.8% of patients. The Boston Bowel Preparation Scale for quality of colonoscopy was 8.97 (95% confidence interval [CI]; 8.94, 9.00). The rate of adenoma detection was 60% and serrated lesion (defined as serrated adenomas or hyperplastic polyps proximal to the splenic flexure) detection was 23%. The rate of precancerous lesion detection (adenomas and serrated lesions) was 66%. The mean number of adenomas per screening procedure was 1.4 (1.2, 1.6) and the mean number of precancerous lesions (adenomas or serrated lesions) per screening procedure was 1.6 (1.4, 1.8). Retrospective study and single endoscopist experience. A comprehensive colonoscopy screening program results in high-quality screening with high detection of adenomas, advanced adenomas, serrated adenomas, and multiple adenomas

  17. Detection of up to 65% of Precancerous Lesions of the Human Colon and Rectum by Mutation Analysis of APC, K-Ras, B-Raf and CTNNB1

    Schneider, Mandy; Scholtka, Bettina, E-mail: scholtka@uni-potsdam.de [Chair of Nutritional Toxicology, Institute of Nutritional Science, University of Potsdam, Arthur- Scheunert-Allee 114-116, 14558 Nuthetal (Germany); Gottschalk, Uwe [Maria Heimsuchung Caritas-Klinik Pankow, Breite Straße 46/47, 13187 Berlin (Germany); Faiss, Siegbert [III. Medizinische Abteilung - Gastroenterologie und Hepatologie, Asklepios Klinik Barmbek, Rubenkamp 220, 22291 Hamburg (Germany); Schatz, Daniela; Berghof-Jäger, Kornelia [BIOTECON Diagnostics GmbH, Hermannswerder Haus 17, 14473 Potsdam (Germany); Steinberg, Pablo, E-mail: scholtka@uni-potsdam.de [Chair of Nutritional Toxicology, Institute of Nutritional Science, University of Potsdam, Arthur- Scheunert-Allee 114-116, 14558 Nuthetal (Germany); Institute for Food Toxicology and Analytical Chemistry, University of Veterinary Medicine Hannover, Bischofsholer Damm 15, 30173 Hannover (Germany)

    2010-12-29

    In the present study a recently conceived 4-gene marker panel covering the Wnt and Ras-Raf-MEK-MAPK signaling pathways was used to analyze 20 colorectal serrated lesions and 41 colorectal adenoma samples and to determine the percentage of each of the above-mentioned potentially precancerous lesions carrying at least one of the four above-mentioned genes in a mutated form. CTNNB1 and B-Raf were screened by PCR-single-strand conformation polymorphism analysis, K-Ras by restriction fragment length polymorphism analysis and the APC gene mutation cluster region (codons 1243–1567) by direct DNA sequencing. APC mutations were only detected in 10% of the serrated lesions but in 34% of the adenomas. Twenty percent of the serrated lesions and 14% of the adenomas carried a mutated K-Ras. B-Raf was found to be mutated in 50% of the serrated lesions and in 22% of the adenomas. CTNNB1 was altered in 12% of the adenomas, but not in serrated lesions. By using the above gene marker panel it could be shown that 65% of the serrated lesions and 61% of the adenomas carried at least one of the four genes in a mutated form. Based on its excellent performance in detecting mutations in sporadic preneoplastic (in this study) and neoplastic lesions (in a previous study) of the human colon and rectum, this primer combination might also be suited to efficiently and non-invasively detect genetic alterations in stool DNA of patients with early colorectal cancer.

  18. Deformation behavior of austenitic stainless steel at deep cryogenic temperatures

    Han, Wentuo; Liu, Yuchen; Wan, Farong; Liu, Pingping; Yi, Xiaoou; Zhan, Qian; Morrall, Daniel; Ohnuki, Somei

    2018-06-01

    The nonmagnetic austenite steels are the jacket materials for low-temperature superconductors of fusion reactors. The present work provides evidences that austenites transform to magnetic martensite when deformation with a high-strain is imposed at 77 K and 4.2 K. The 4.2 K test is characterized by serrated yielding that is related to the specific motion of dislocations and phase transformations. The in-situ transmission electron microscope (TEM) observations in nanoscale reveal that austenites achieve deformation by twinning under low-strain conditions at deep cryogenic temperatures. The generations of twins, martensitic transformations, and serrated yielding are in order of increasing difficulty.

  19. Xylosma longifolium

    System5

    Xylosma longifolium Clos, of the family Salicaceae is a moderate size tree distibuted in the sub-. Himalayan ravines up to 1500 m in Western Pakistan and Eastern Himalayas in India. Bark is greyish-brown. Wood is scented. Leaves are glabrous, elliptic-oblong with serrate margins. Inflorescence axillary and in branched ...

  20. The biochemical adaptations of spotted wing drosophila (Diptera: Drosophilidae) to fresh fruits reduced fructose concentrations and glutathione-S transferase activities

    Spotted wing drosophila (SWD), Drosophila suzukii, is an invasive and economically damaging pest in Europe and North America, because the females have a serrated ovipositor enabling them to infest ripening almost all small fruits before harvest. Also flies are strongly attracted to fresh fruits rath...

  1. Automatic locking orthotic knee device

    Weddendorf, Bruce C. (Inventor)

    1993-01-01

    An articulated tang in clevis joint for incorporation in newly manufactured conventional strap-on orthotic knee devices or for replacing such joints in conventional strap-on orthotic knee devices is discussed. The instant tang in clevis joint allows the user the freedom to extend and bend the knee normally when no load (weight) is applied to the knee and to automatically lock the knee when the user transfers weight to the knee, thus preventing a damaged knee from bending uncontrollably when weight is applied to the knee. The tang in clevis joint of the present invention includes first and second clevis plates, a tang assembly and a spacer plate secured between the clevis plates. Each clevis plate includes a bevelled serrated upper section. A bevelled shoe is secured to the tank in close proximity to the bevelled serrated upper section of the clevis plates. A coiled spring mounted within an oblong bore of the tang normally urges the shoes secured to the tang out of engagement with the serrated upper section of each clevic plate to allow rotation of the tang relative to the clevis plate. When weight is applied to the joint, the load compresses the coiled spring, the serrations on each clevis plate dig into the bevelled shoes secured to the tang to prevent relative movement between the tang and clevis plates. A shoulder is provided on the tang and the spacer plate to prevent overextension of the joint.

  2. Ochnaceae

    Stoffers, A.L.

    1966-01-01

    Herbs, shrubs or trees. Leaves alternate, simple, glabrous, entire or serrate. Stipules entire or fringed. Inflorescence usually consisting of terminal or axillary panicles or racemes, sometimes flowers solitary or clustered in the leaf-axils. Flowers hermaphrodite, actinomorphic. Sepals 5 (or

  3. Amaranthaceae

    Backer, C.A.

    1948-01-01

    Herbs, rarely climbing or clambering shrubs. Leaves opposite or alternate, exstipulate, simple, entire or obsoletely dentate-serrate. Flowers ♀, unisexual, or partly difformed and neutral, in clusters, heads, racemes, spikes or panicles, solitary or clustered in the axil of persistent bracts,

  4. Genetics of Colorectal Cancer (PDQ®)—Health Professional Version

    Hereditary colorectal cancer syndromes include Lynch syndrome and several polyposis syndromes (familial adenomatous polyposis, MUTYH-associated polyposis, juvenile polyposis syndrome, Peutz-Jeghers syndrome, and serrated polyposis syndrome). Learn about the genetics, clinical manifestations, management, and psychosocial aspects of these and other hereditary colon cancer syndromes in this expert-reviewed summary.

  5. On a new genus and species of Apogonidae

    Koumans, F.P.

    1933-01-01

    PTERAPOGON n. g. Body deep, compressed. Head large. Eye large, greater than snout. Mouth wide, oblique. Maxillary reaches to below middle of eye. Teeth villiform in bands in jaws, on vomer and palatines. No canines. Preopercle ridge double, edge serrate. Opercle with spine posteriorly. Scales large,

  6. Non-repeatability of large plasticity for Fe-based bulk metallic glasses

    Yang, Weiming [State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, School of Sciences, China University of Mining and Technology, Xuzhou 221116 (China); Sun, Baoan [Department of Mechanical and Biomedical Engineering, City University of Hong Kong (Hong Kong); Zhao, Yucheng, E-mail: zhaoyc1972@163.com [State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, School of Sciences, China University of Mining and Technology, Xuzhou 221116 (China); Li, Qiang [School of Physics Science and Technology, Xinjiang University, Urumqi, Xinjiang 830046 (China); Hou, Long; Luo, Ning [State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, School of Sciences, China University of Mining and Technology, Xuzhou 221116 (China); Dun, Chaochao [Department of Physics, Wake Forest University, Winston Salem, NC 27109 (United States); Zhao, Chengliang [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Ma, Zhanguo [State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, School of Sciences, China University of Mining and Technology, Xuzhou 221116 (China); Liu, Haishun, E-mail: liuhaishun@126.com [State Key Laboratory for Geomechanics and Deep Underground Engineering, School of Mechanics and Civil Engineering, School of Sciences, China University of Mining and Technology, Xuzhou 221116 (China); Shen, Baolong [School of Materials Science and Engineering, Southeast University, Nanjing 211189 (China)

    2016-08-15

    Serrated flow is an essential characteristic of the plastic deformation of metallic glasses. Under restricted loading conditions, the formation and expansion of shear bands act as the serrated flow of stress-strain curves in metallic glasses. In this work, serrated flows in Fe{sub 50}Ni{sub 30}P{sub 13}C{sub 7} glassy samples with different plasticity were studied. The distribution histogram shows a monotonically decreasing trend during the initial deformation stage (i.e., the plastic deformation in the range of 0–8%), whereas in the following deformation stage (i.e., a plastic deformation of 8–14%), the stress drop frequency distribution presents both a monotonically decreasing distribution and a peak shape similar to chaotic dynamics. It is shown that the spatial evolution behavior of shear bands in Fe{sub 50}Ni{sub 30}P{sub 13}C{sub 7} metallic glasses evolved from self-organized critical to chaotic dynamics in the form of serrated flow, which reveals the origin of discrete plasticity of Fe-based bulk metallic glasses. This study has potential applications for understanding the plastic deformation mechanism. - Highlights: • Two-stage deformation mechanism in Fe-based bulk metallic glasses. • Distribution of the stress drop amplitude is significantly different at two stages. • The stages are related to multiple shear bands and discrete plasticity.

  7. Non-repeatability of large plasticity for Fe-based bulk metallic glasses

    Yang, Weiming; Sun, Baoan; Zhao, Yucheng; Li, Qiang; Hou, Long; Luo, Ning; Dun, Chaochao; Zhao, Chengliang; Ma, Zhanguo; Liu, Haishun; Shen, Baolong

    2016-01-01

    Serrated flow is an essential characteristic of the plastic deformation of metallic glasses. Under restricted loading conditions, the formation and expansion of shear bands act as the serrated flow of stress-strain curves in metallic glasses. In this work, serrated flows in Fe_5_0Ni_3_0P_1_3C_7 glassy samples with different plasticity were studied. The distribution histogram shows a monotonically decreasing trend during the initial deformation stage (i.e., the plastic deformation in the range of 0–8%), whereas in the following deformation stage (i.e., a plastic deformation of 8–14%), the stress drop frequency distribution presents both a monotonically decreasing distribution and a peak shape similar to chaotic dynamics. It is shown that the spatial evolution behavior of shear bands in Fe_5_0Ni_3_0P_1_3C_7 metallic glasses evolved from self-organized critical to chaotic dynamics in the form of serrated flow, which reveals the origin of discrete plasticity of Fe-based bulk metallic glasses. This study has potential applications for understanding the plastic deformation mechanism. - Highlights: • Two-stage deformation mechanism in Fe-based bulk metallic glasses. • Distribution of the stress drop amplitude is significantly different at two stages. • The stages are related to multiple shear bands and discrete plasticity.

  8. A theropod tooth from the Late Triassic of southern Africa

    An isolated, large recurved and finely serrated tooth found associated with the prosauropod Euskelosaurus from the Late Triassic part of the Elliot Formation is described here. It is compared to the Triassic thecodonts and carnivorous dinosaurs and its possible affinity is discussed. The tooth possibly belongs to a basal ...

  9. A Conserved Molecular Framework for Compound Leaf Development

    Blein, Thomas; Pulido, Amada; Vialette-Guiraud, Aurélie

    2008-01-01

      Diversity in leaf shape is produced by alterations of the margin: for example, deep dissection leads to leaflet formation and less-pronounced incision results in serrations or lobes. By combining gene silencing and mutant analyses in four distantly related eudicot species, we show that reducing...

  10. Supplementary inferences from mysid feeding appendage morphology

    1988-08-09

    Aug 9, 1988 ... stomach contents primarily consist of unidentifiable, fine particulate matter, allowing only ... tion with osmic acid and critical point drying with CO2•. Mandibles and pereiopods were ... cardiac and pyloric stomachs; E - 'mortar and pestle' structure; F - serrated folds in stomach. R eprod u ced by Sa bin et G a.

  11. The RNA-binding protein HOS5 and serine/arginine-rich proteins RS40 and RS41 participate in miRNA biogenesis in Arabidopsis

    Chen, Tao; Cui, Peng; Xiong, Liming

    2015-01-01

    MicroRNAs are a class of small regulatory RNAs that are generated from primary miRNA (pri-miRNA) transcripts with a stem-loop structure. Accuracy of the processing of pri-miRNA into mature miRNA in plants can be enhanced by SERRATE (SE

  12. On the dynamical mechanism of cross-over from chaotic to turbulent ...

    law statistics for the magnitudes and durations of the stress drops as in experiments. Concomitantly, the ... Despite this reduction, the system can exhibit complex dynamics such as chaos [1]. ... associated serrations are classified into three generic types C, B and A found with increasing strain .... Solid line is guide to the eye.

  13. Increased polyp detection using narrow band imaging compared with high resolution endoscopy in patients with hyperplastic polyposis syndrome

    Boparai, K. S.; van den Broek, F. J. C.; van Eeden, S.; Fockens, P.; Dekker, E.

    2011-01-01

    Hyperplastic polyposis syndrome (HPS) is associated with colorectal cancer and is characterized by multiple hyperplastic polyps, sessile serrated adenomas (SSAs) and adenomas. Narrow band imaging (NBI) may improve the detection of polyps in HPS. We aimed to compare polyp miss rates with NBI with

  14. Jamesbrittenia bergae (Scrophulariaceae, a distinctive new species from Limpopo, South Africa

    P. Lemmer

    2003-09-01

    Full Text Available Jamesbrittenia bergae P.Lemmer is a new species from the Farm Brakvallei near Thabazimbi in Limpopo [Northern Province]. Large, medium-textured. bright scarlet flowers w ith yellow throats are borne singly in upper leaf axils; the flowering branches, although terminal, do not form elongated racemes: leaves are greyish green, coarsely serrated. It grows in full sun on ferricrete outcrops.

  15. Reevaluation of Chalcophora angulicollis (LeConte) and Chalcophora virginiensis (Drury) with a review and key to the North American species of Chalcophora DeJean (Coleoptera: Buprestidae)

    Crystal A. Maier; Michael A. Ivie

    2013-01-01

    Chalcophora angulicollis (LeConte) and Chalcophora virginiensis (Drury) are shown to be valid allopatric species in the western and eastern forests of North America, respectively. The historic uncertainty regarding their status is reviewed, and new characters of the aedeagus, penultimate maxillary palpomere, and elytral serrations are utilized for their identification...

  16. Cutting zone area and chip morphology in high-speed cutting of titanium alloy Ti-6Al-4V

    Ke, Qing Chan; Xu, Daochun; Xiong, Dan Ping

    2017-01-01

    The titanium alloy Ti-6Al-4V has superior properties but poor machinability, yet is widely used in aerospace and biomedical industries. Chip formation and cutting zone area are important factors that have received limited attention. Thus, we propose a high-speed orthogonal cutting model for serrated chip formation. The high speed orthogonal cutting of Ti-6Al-4V was studied with a cutting speed of 10-160 m/min and a feed of 0.07-0.11 mm/r. Using theoretical models and experimental results, parameters such as chip shape, serration level, slip angle, and shear slip distance were investigated. Cutting zone boundaries (tool-chip contact length, length of shear plane, and critical slip plane) and cutting zone area were obtained. The results showed that discontinuous, long-curling, and continuous chips were formed at low, medium, and high speeds, respectively. Serration level, shear slip distance, and slip angle rose with increasing cutting speed. The length of shear plane, tool-chip contact, and critical slip plane varied subtly with increased cutting speed, and rose noticeably with increased feed. Cutting zone area grew weakly with increased cutting speed, levelling off at high cutting speed; however, it rose noticeably with increased feed. This study furthers our understanding of the shear slip phenomenon and the mechanism of serrated chip formation

  17. Cutting zone area and chip morphology in high-speed cutting of titanium alloy Ti-6Al-4V

    Ke, Qing Chan; Xu, Daochun; Xiong, Dan Ping [School of Technology, Beijing Forestry University, Beijing (China)

    2017-01-15

    The titanium alloy Ti-6Al-4V has superior properties but poor machinability, yet is widely used in aerospace and biomedical industries. Chip formation and cutting zone area are important factors that have received limited attention. Thus, we propose a high-speed orthogonal cutting model for serrated chip formation. The high speed orthogonal cutting of Ti-6Al-4V was studied with a cutting speed of 10-160 m/min and a feed of 0.07-0.11 mm/r. Using theoretical models and experimental results, parameters such as chip shape, serration level, slip angle, and shear slip distance were investigated. Cutting zone boundaries (tool-chip contact length, length of shear plane, and critical slip plane) and cutting zone area were obtained. The results showed that discontinuous, long-curling, and continuous chips were formed at low, medium, and high speeds, respectively. Serration level, shear slip distance, and slip angle rose with increasing cutting speed. The length of shear plane, tool-chip contact, and critical slip plane varied subtly with increased cutting speed, and rose noticeably with increased feed. Cutting zone area grew weakly with increased cutting speed, levelling off at high cutting speed; however, it rose noticeably with increased feed. This study furthers our understanding of the shear slip phenomenon and the mechanism of serrated chip formation.

  18. Role of stem cells in large bowel carcinogenesis

    N. A. Nefedova

    2015-01-01

    Full Text Available Сancer stem cells (CSC play a significant role in the development and progression of colorectal cancer. They are capable of self-senewal and multipotent differentiation. CSC can be formed from stem cells or mutant by dedifferentiation of crypt epithelial cells. Recently, much attention is paid to CSC in colon cancer, but very little has been published regarding their expression in colon polyps. In 2010 The World Health Organization attributed the so-called serrated lesions, including hyperplastic polyp, serrated sessile adenoma and traditional serrated adenoma to a group of precancerous lesions of the colon in addition to the classical tubular, villous and tubulo-villous adenomas. Despite the large number of publications devoted to the newly selected category, a full understanding of the processes involved in the formation of polyps and their progression into colon cancer, there is still no. Identification of CSC in colon polyps will assess their potential malignancy conduct adequate therapy, determine the amount of the operation and further treatment strategy. This in turn will contribute to the early detection and prevention of cancer. Identification of CSC, an assessment of their localization and distribution in tubular adenomas, serrated adenoma broad-based, traditional serrated adenoma and hyperplastic polyps allow to evaluate the potential of malignancy and prognosis for each of the polyps. In this regard, the definition of markers characteristic of colon CSC, is interesting not only from a scientific, but also from a practical point of view.

  19. Avian Wings

    Liu, Tianshu; Kuykendoll, K.; Rhew, R.; Jones, S.

    2004-01-01

    This paper describes the avian wing geometry (Seagull, Merganser, Teal and Owl) extracted from non-contact surface measurements using a three-dimensional laser scanner. The geometric quantities, including the camber line and thickness distribution of airfoil, wing planform, chord distribution, and twist distribution, are given in convenient analytical expressions. Thus, the avian wing surfaces can be generated and the wing kinematics can be simulated. The aerodynamic characteristics of avian airfoils in steady inviscid flows are briefly discussed. The avian wing kinematics is recovered from videos of three level-flying birds (Crane, Seagull and Goose) based on a two-jointed arm model. A flapping seagull wing in the 3D physical space is re-constructed from the extracted wing geometry and kinematics.

  20. Estimating exposure of piscivorous birds and sport fish to mercury in California lakes using prey fish monitoring: a predictive tool for managers

    Ackerman, Joshua T.; Hartman, C. Alex; Eagles-Smith, Collin A.; Herzog, Mark P.; Davison, Jay; Ichikawa, Gary; Bonnema, Autumn

    2015-01-01

    Numerous water bodies in California are listed under the Clean Water Act as being impaired due to mercury (Hg) contamination. The Surface Water Ambient Monitoring Program (SWAMP), via the Bioaccumulation Oversight Group (BOG), has recently completed statewide surveys of contaminants in sport fish tissue from more than 250 lakes and rivers in California and throughout coastal waters. This effort focused on human health issues but did not include beneficial uses by wildlife. Many piscivorous birds such as grebes, terns, cormorants, and mergansers eat fish smaller than those that were sampled by BOG, and sport fish Hg concentrations are not always indicative of wildlife exposure to Hg; therefore, the BOG surveys could not address whether wildlife were at risk due to Hg-induced reproductive impairment in these lakes.

  1. Development of an Index to Bird Predation of Juvenile Salmonids within the Yakima River, 2000 Annual Report.

    Grassley, James M.; Grue, Christian E.; Major, III, Walter (University of Washington, School of Aquatic and Fishery Science, Seattle, WA)

    2002-01-01

    Avian predation of fish is suspected to contribute to the loss of juvenile spring chinook salmon in the Yakima Basin, potentially constraining natural production. In 1997 and 1998, the Yakama/Klickitat Fisheries Project (YKFP) and the Washington Department of Fish and Wildlife (WDFW)--whose goal is to increase natural production historically present within the Yakima River--initiated investigations to assess the feasibility of developing an index to avian predation of juvenile salmon within the river. This research--conducted by Dr. Steve Mathews and David Phinney of the University of Washington--confirmed that Ring-billed Gulls and Common Mergansers were the primary avian predators of juvenile salmon, and that under certain conditions could impact migrating smolt populations. Beginning in 1999, the Washington Cooperative Fish and Wildlife Research Unit (WACFWRU) was asked by the YKFP and the WDFW to continue development of avian consumption indices. Monitoring methods developed by Phinney et al. (1998) were adopted (with modifications) and monitoring of impacts to juvenile salmon along river reaches and at areas of high predator/prey concentrations (colloquially referred to as ''hotspots'') continued through 2000. In 2000, piscivorous birds were counted from river banks at hotspots and from a raft or drift boat along river reaches. Consumption by gulls at Hotspots was based on direct observations of foraging success and modeled abundance; consumption by all other piscivorous birds was estimated using published dietary requirements and modeled abundance. Further development of the avian consumption index model provided an estimation of smolt consumption for the 2000 survey season. Seasonal patterns of avian piscivore abundance were identified, diurnal patterns of gull abundance at hotspots were identified, predation indices were calculated for hotspots and spring and summer river reaches, and the efficacy of aerial surveys for estimating bird

  2. Chaetotaxy and setal diversity of grooming legs in species of porcelain crabs (Crustacea: Anomura: Porcellanidae

    Luciane Augusto de Azevedo Ferreira

    2018-03-01

    Full Text Available Abstract The morphology of the fifth pereiopods was studied under scanning electron microscopy in ten species of porcelain crabs for chaetotaxy and setal diversity, namelly Megalobrachium pacificum, Megalobrachium roseum, Pachycheles grossimanus, Petrolisthes armatus, Petrolisthes tuberculatus, Pisidia brasiliensis, Pisidia longicornis, Polyonyx gibbesi, Porcellana platycheles and Porcellana sayana. Six setal types were identified: simple, pappose, sickle-shaped serrate, straight serrate, club-shaped and tooth-like cuspidate. Porcelain crabs can differ in the fifth pereiopod setal morphology, chaetotaxy and setal density, even among species within the same genus. The absence of sexual dimorphism of the grooming legs in porcelain crabs suggests that grooming eggs requires no particular grooming apparatus in females and that male and female are equal in grooming efficiency.

  3. Portevin-Le Chatelier effect in rolled Al-Li based alloys

    Mizera, J.; Kurzydlowski, K.J.

    2001-01-01

    Studied were carried out on the Portevin-Le Chatelier (PLC) effect in binary, ternary and quaternary Al-Li alloys and in the commercial 8090 alloy. The correlation between the serration characteristic, the rolling degree and the straining orientation has been analysed. The fact that the presence of the Cu-containing precipitates intensifies the PLC effects suggests, that these are primarily related to the interactions between the dislocations and the semi-coherent T 1 (Al 2 CuLi) precipitates. The analysis of the PLC effect in Al-Li alloys shows that the serrations in the stress-strain curve exhibit a profound degree of anisotropy. Most pronounced PLC effects are observed along the rolling and transverse directions. (author)

  4. Dynamic strain aging in Haynes 282 superalloy

    Hörnqvist Magnus

    2014-01-01

    Full Text Available Haynes 282 is a newly introduced Ni-based superallony, developed to provide a combination of high-temperature mechanical properties, thermal stability and processability. The present contribution investigates the effect of dynamic strain aging (DSA on the deformation behaviour of Haynes 282 during monotonic and cyclic loading. It is shown that DSA (presumably related to carbon diffusion based on rough estimates of the activation energy completely dominates the development of the stress during cycling at intermediate temperatures, leading to extensive cyclic hardening and serrated yielding. However, no clear effects on the fatigue life or the resulting dislocation structure could be observed. The tensile properties were not severely affected, in spite of the presence of extensive serrated yielding, although a reduction in ductility was observed in the DSA temperature regime. During monotonic loading at lower strain rates indications of an additional DSA mechanism due to substitutional elements were observed.

  5. The effects of strain rate and carbon concentration on the dynamic strain aging of cold rolled Ni-based alloy in high temperature water

    Kuang, Wenjun; Was, Gary S.

    2015-01-01

    Graphical abstract: The stress amplitude of serrations first increases with decreasing strain rate and then gradually saturates. The matrix carbon concentration affects the stress amplitude and the tendency to saturation. - Abstract: The effect of strain rate on dynamic strain aging of cold-rolled Ni-based alloy was investigated. With decreasing strain rate, the stress amplitude of serrations first increased and then saturated. Compared with the solution-annealed condition, the thermally-treated condition produced smaller stress amplitudes that saturated at a lower strain rate. Observations are consistent with a mechanism in which the locking strength of solute atmospheres first increases with increasing solute atom arrival at dislocations and gradually saturates as solute reaches a critical level

  6. Experimental study of discontinuous plastic flow, phase transformation and micro-damage evolution in ductile materials at cryogenic temperatures

    Marcinek, Dawid Jarosław; Sgobba, S

    2009-01-01

    The present Thesis deals with three low temperature phenomena occurring in ductile materials subjected to mechanical loads: serrated yielding, plastic strain induced γ-α’ phase transformation and evolution of micro-damage: - the Thesis explains the physical mechanisms governing each phenomenon at the micro and macroscopic levels; - the document describes in detail the advanced laboratory equipment needed for cryogenic experiments; - the results of tests carried out with unique precision and focused on serrated yielding and evolution of micro-damage (the observations were made with different strain rates and with the use of different materials) are presented; - validation of suitable kinetic laws and identification of parameters for tested materials is carried out.

  7. Hyperplastic polyps of the colon and rectum - reclassification, BRAF and KRAS status in index polyps and subsequent colorectal carcinoma

    Janjua, Huma Gul Rehana; Høgdall, Estrid; Linnemann, Dorte

    2015-01-01

    (THP), sessile serrated lesions (SSL), and other lesions. All patients were confirmed in the Danish National Pathology Database for the occurrence of metachronous polyps/adenomas, colorectal cancer (CRC), and other gastrointestinal malignancies. Molecular pathology of the CRC were characterized...... and correlated with the index lesion. In total, 591 HP biopsy specimens were obtained from 480 patients. The lesions were reclassified as: 358 THP, 109 SSL, 35 TA, 81 unspecified non-neoplastic lesions, four traditional serrated adenoma, and 4 SSL with cytological dysplasia. Seven patients developed CRC...... in the follow-up period (1 patient had SSL, 4 had THP, and 2 had unspecified non-neoplastic lesions). Ten patients developed other gastrointestinal malignancies. The patient with SSL as index lesions who developed CRC harbored V600E BRAF mutation in both index lesion and the carcinoma. Sixteen percent...

  8. Sporadic colorectal polyps and mismatch repair proteins

    Mahsa Molaei

    2011-01-01

    Full Text Available Background: Colorectal cancers often arise from benign polyps. Adenomatous polyps and serrated polyps progress step by step to adenocarcinoma and change into malignant cancers. Genetic and epigenetic changes have correlation with specific stages of polyp-adenocarcinoma progression and colorectal cancer histopathological changes. Aims: In this study we used immunohistochemistry (IHC staining in sporadic colorectal polyps to assay functional status of MLH1, MSH2, MSH6, and PMS2 proteins, to track genetic/epigenetic roles of this issue in our patients. Materials and Methods: In this cross-sectional study we assessed all patients who were admitted with sporadic colorectal polyps and underwent polypectomy in endoscopy department during 2004-2008. Result: IHC results were abnormal in 6.8% cases for MLH1, in 4.5% cases for MSH2, in 3% for MSH6, and in 4.8% for PMS2. In all cases with abnormal PMS2, MLH1 was also reported as abnormal. Same results were reported for abnormal MSH2, which is accompanied with abnormal MSH6 in all cases (P values < 0.001. There is no significant difference between IHC staining results, gender, dysplasia grade, adenomatous type, and invasion. On the other hand, there was significant difference between IHC staining results, polyp location, and mean age of patients. The same significant difference was between adenomatous polyps and serrated adenoma polyps by MLH1 and PMS2 (P values < 0.05. Conclusion: According to our findings, maybe MMR dysfunction is the cause of sporadic colorectal polyps in younger age and its increasing risk of dysplasia progression and malignancy progression is only in serrated adenoma. Sporadic polyps in left colon had a higher risk to progress to malignancies, and abnormal IHC staining for MLH1 and PMS2 in serrated polyps is much more than in other adenomatous polyps.

  9. Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

    Underwood, Charlie J.; Johanson, Z.; Smith, M.M.

    2016-01-01

    The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a hi...

  10. Epidemiology of goblet cell and microvesicular hyperplastic polyps.

    Qazi, Taha M; O'Brien, Michael J; Farraye, Francis A; Gould, Ryan W; Chen, Clara A; Schroy, Paul C

    2014-12-01

    Serrated polyps compromise both typical hyperplastic polyps as well as sessile serrated adenomas and dysplastic serrated polyps. Hyperplastic polyps exhibit two histological patterns: microvesicular hyperplastic polyps (MVHPs) and goblet cell hyperplastic polyps (GCHPs). MVHPs and GCHPs differ in their molecular signature. MVHPs have been frequently found to have the BRAF(V600E) mutation as well as aberrant methylation. In contrast, GCHPs have been associated with the KRAS mutation (KRAS-mut), which are infrequently seen in dysplastic serrated sessile adenomas. The particular risk factors that are associated with development of the types of hyperplastic polyps have not been previously studied. The purpose of this study is to characterize the associations between particular risk factors and the development of goblet cell or microvesicular hyperplastic polyps. We conducted a cross-sectional analysis of 3,543 asymptomatic, mostly average risk patients 50 and 79 years of age undergoing open-access screening colonoscopy between March 2005 and January 2012. Each patient was given a survey regarding 25 reputed risk factors for colorectal neoplasia and the responses were correlated with findings at colonoscopy. Associations between putative risk factors for colorectal neoplasia and MVHPs and GSHPs were examined using multiple logistic regression. MVHPS and GCHPs were identified in 5.3% and 8.7% of patients, respectively. The results of the statistical analysis indicate that a history of smoking greater than 20 years is associated with an increased risk of MVHPs (P30 kg/m(2) was also associated with the presence of MVHP at colonoscopy (PGCHP at colonoscopy in blacks. The study suggests that the development of the distinct histological types of hyperplastic polyps are associated with distinct modifiable and non-modifiable lifestyle factors.

  11. Peacemaking, Complex Emergencies, and Disaster Response: What Happens, How Do You Respond?

    1999-02-01

    territories have been hit by several major hurricanes in recent years, including Hurricane Andrew (South Florida, 1992), Hurricane Hugo (South Carolina...recent eruptions on Montserrat (in the Caribbean) and in the Cape Verde islands are examples of such small-scale eruptions. Figure 18 shows the...timeline for recent volcanic eruptions on Mont- serrat, and in the Cape Verde Islands. In the case of Montserrat , the warning time was essentially

  12. Electrical resistance oscillations during plastic deformation in A Ti-Al-Nb-Zr alloy at 4·2 K

    Nikiforenko, V. N.; Lavrentev, F. F.

    1986-10-01

    The serrated plastic flow in titanium alloy containing 5% Al, 2·5% Zr and 2% Nb has been investigated by measuring its electrical resistance and applying selective chemical etching. The electrical resistance was found to oscillate under active deformation at 4·2 K. Analysis of the possible causes seems to indicate a dominant role of break by dislocation pile-ups through obstacles, viz second phase precipitates and grain boundaries.

  13. Single acting translational/rotational brake

    Allred, Johnny W. (Inventor); Fleck, Jr., Vincent J. (Inventor)

    1996-01-01

    A brake system is provided that applies braking forces on surfaces in both the translational and rotational directions using a single acting self-contained actuator that travels with the translational mechanism. The brake engages a mechanical lock and creates a frictional force on the translational structure preventing translation while simultaneously creating a frictional torque that prevents rotation of the vertical support. The system may include serrations on the braking surfaces to provide increased braking forces.

  14. Corrosion Induced Loss of Capacity of Post Tensioned Seven Wire Strand Cable Used in Multistrand Anchor Systems Installed at Corps Projects

    2016-12-01

    wedges. Method 4: Using a plastic -coated aluminum wire mesh to act as a cushion around the cable to reduce the bite of the serrations in the wedges...PT seven-wire strand cable surrounded by copper sheet layers and the wedges. Method 6: Using one wrap of 0.005 in. bronze shim stock to act as a...sterilized before use to reduce the presence of biological agents that will affect the sample during shipment. Plastics are lighter than glass

  15. The tensile behavior of GH3535 superalloy at elevated temperature

    Han, F.F.; Zhou, B.M.; Huang, H.F.; Leng, B.; Lu, Y.L. [Thorium Molten Salts Reactor Center, Shanghai Institute of Applied Physics, Chinese Academy of Sciences (China); Dong, J.S. [Superalloy Division, Institute of Metal Research, Chinese Academy of Sciences (China); Li, Z.J., E-mail: lizhijun@sinap.ac.cn [Thorium Molten Salts Reactor Center, Shanghai Institute of Applied Physics, Chinese Academy of Sciences (China); Zhou, X.T. [Thorium Molten Salts Reactor Center, Shanghai Institute of Applied Physics, Chinese Academy of Sciences (China)

    2016-10-01

    The tensile behavior of GH3535 alloy has been investigated at strain rates of 8.33 × 10{sup −5}/s{sup −1}–8.33 × 10{sup −3}/s{sup −1}, in the temperature range of 25–800 °C. The results showed that the ultimate tensile strength was decreased with increasing temperature and increased with rising strain rate, whereas the yield strength kept almost a constant value at the temperature range from 550 to 800 °C in all strain rates test. The formation of M{sub 12}C carbides at the grain boundary during the tension process played an important role in increasing the yield strength of the alloy at elevated temperatures. But inhomogeneous deformation at 650 °C resulted in the minimum ductility of the alloy. Additionally, various types of serrations were noticed on the stress-strain curves for the alloy tested in the temperature range of 500–800 °C. Normal Portevin-Le Chatelier (PLC) effect and positive strain rate sensitivity were observed in this alloy. Type A and A + B serrations were presented to stress-strain curves at temperatures below 650 °C, whereas type C serration was noticed when the temperature rose above 650 °C. The analysis suggested that the interactions between substitutional solutes migration and mobile dislocations were the main reason for the serrated flow behavior in this alloy. - Highlights: • The tensile behavior of GH3535 alloy at elevated temperature was studied. • The yield strength anomaly was observed in the temperature range from 550 to 800 °C. • The formation of M{sub 12}C improves the grain boundary strength to a certain extent. • Inhomogeneous deformation at 650 °C results in the ductility loss of the alloy. • The interaction between solute atoms and dislocations results in the PLC effect.

  16. The tadpole of Hypsiboas leptolineatus (Braun and Braun, 1977), a species in the Hypsiboas polytaenius clade (Anura; Hylidae)

    Both,C.; Kwet,A.; Solé,M.

    2007-01-01

    The larval morphology of Hypsiboas leptolineatus was studied. The tadpole has an ovoid body in lateral view, wider than deep; snout rounded with dorsal reniform nostrils; spiracle sinistral with lateral wall attached to body; anal tube dextral; tail fins convex with acuminate tip; oral disc ventral; labial tooth row formula is 2(2)/3(1); moderately developed beaks with serrated jaw sheaths. These external oral features are compared with those of the known tadpoles in the Hypsiboas polytaenius...

  17. Influence of dynamic strain aging on tensile deformation behavior of alloy 617

    Ekaputra, I. M. W. [Pukyong National University, Busan (Korea, Republic of); Kim, Woo Gon; Park, Jae Young; Kim, Seon Jin; Kim, Eung Seon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-12-15

    To investigate the dynamic strain aging (DSA) behavior of Alloy 617, high-temperature tensile tests were carried out with strain rates variations of 10{sup -}3{sup /}s, 10{sup -4}/s, and 10{sup -5}/s from 24°C to 950°C. Five flow relationships, Hollomon, Ludwik, Swift, Ludwigson, and Voce, were applied to describe the tensile true stress–strain curves, and the DSA region was defined. In describing the tensile curves, Ludwigson's equation was superior to the other equations, and the DSA region was adequately defined by this equation as plateaus at intermediate temperatures from 200°C to 700°C. It was identified that Alloy 617 is dominated by three types of serrations, known as Types D, A+B, and C. The activation energy values for each serration type were obtained by the Arrhenius equation. By using the obtained activation energy values, the serrated yielding map and the DSA mechanism were drawn and manifested. In addition, the relationship between the tensile strength and strain rate at higher temperatures above 700°C was found to be closely related to the amounts of slip lines. In the scanning electron microscope (SEM) fractographs, there was a significant difference at the low, intermediate, and high temperatures, but almost the same to the three strain rates.

  18. Evidence of a therapsid scavenger in the Late Permian Karoo Basin, South Africa

    Nicholas Fordyce

    2012-10-01

    Full Text Available Dicynodonts are an extinct group of herbivorous non-mammalian therapsids (‘mammal-like’ reptiles that are widely known from terrestrial Permo-Triassic strata throughout Pangaea. Dicynodont fossil remains are common within the Late Permian Beaufort Group of the Karoo Basin in South Africa. A large, partially articulated dicynodont skeleton recovered from the TropidostomaAssemblage Zone is taphonomically important in having an unusual disarticulation pattern, bone surface punctures and a broken tooth of an unidentified carnivore associated with it. Here we report on the nature of the bone damage, and the identity of the carnivore that lost a canine tooth whilst scavenging the dicynodont carcass. The morphological characteristics of the serrations on the unidentified tooth were compared with those of contemporaneous carnivores, the gorgonopsians and therocephalians. Scanning electron microscopy analysis of a silicone cast of the unidentified tooth revealed distinctive 0.5-mm square-shaped serrations. Our comparative assessment of the tooth size, curvature, cross-sectional shape and morphology of the serrations revealed that the unidentified canine most closely matched Aelurognathus,a gorgonopsian known from the same assemblage zone.

  19. Degree of Tissue Differentiation Dictates Susceptibility to BRAF-Driven Colorectal Cancer

    Kevin Tong

    2017-12-01

    Full Text Available Oncogenic mutations in BRAF are believed to initiate serrated colorectal cancers; however, the mechanisms of BRAF-driven colon cancer are unclear. We find that oncogenic BRAF paradoxically suppresses stem cell renewal and instead promotes differentiation. Correspondingly, tumor formation is inefficient in BRAF-driven mouse models of colon cancer. By reducing levels of differentiation via genetic manipulation of either of two distinct differentiation-promoting factors (Smad4 or Cdx2, stem cell activity is restored in BRAFV600E intestines, and the oncogenic capacity of BRAFV600E is amplified. In human patients, we observe that reduced levels of differentiation in normal tissue is associated with increased susceptibility to serrated colon tumors. Together, these findings help resolve the conditions necessary for BRAF-driven colon cancer initiation. Additionally, our results predict that genetic and/or environmental factors that reduce tissue differentiation will increase susceptibility to serrated colon cancer. These findings offer an opportunity to identify susceptible individuals by assessing their tissue-differentiation status.

  20. Influence of dynamic strain aging on tensile deformation behavior of alloy 617

    Ekaputra, I. M. W.; Kim, Woo Gon; Park, Jae Young; Kim, Seon Jin; Kim, Eung Seon

    2016-01-01

    To investigate the dynamic strain aging (DSA) behavior of Alloy 617, high-temperature tensile tests were carried out with strain rates variations of 10"-3"/s, 10"-"4/s, and 10"-"5/s from 24°C to 950°C. Five flow relationships, Hollomon, Ludwik, Swift, Ludwigson, and Voce, were applied to describe the tensile true stress–strain curves, and the DSA region was defined. In describing the tensile curves, Ludwigson's equation was superior to the other equations, and the DSA region was adequately defined by this equation as plateaus at intermediate temperatures from 200°C to 700°C. It was identified that Alloy 617 is dominated by three types of serrations, known as Types D, A+B, and C. The activation energy values for each serration type were obtained by the Arrhenius equation. By using the obtained activation energy values, the serrated yielding map and the DSA mechanism were drawn and manifested. In addition, the relationship between the tensile strength and strain rate at higher temperatures above 700°C was found to be closely related to the amounts of slip lines. In the scanning electron microscope (SEM) fractographs, there was a significant difference at the low, intermediate, and high temperatures, but almost the same to the three strain rates

  1. Sequence Stratigraphy of lower zones of Asmari Formation in Marun Oilfield by using of microfacies analysis, isolith maps and γ- Ray log

    Jalil Jafari

    2015-01-01

    Full Text Available The Oligo- Miocene Asmari Formation is one of the most important reservoir units of the Marun Oilfield in Dezful Embayment SW Iran, deposited in Zagros foreland basin. The goal of this study is to interpret depositional environment and sequence stratigraphy of lower zones of the Asmari Formation in Well No.281, 342 and 312in Marun Oilfield based on changes in the shape of γ- Ray, isolith maps and microfacies properties. Accordingly, identification of 9 carbonate microfacies and 2 siliciclastic petrofacies were identified that are deposited in four depositional environment including open marine, barrier, lagoon and tidal flat in a homoclinal ramp (consisting of outer, middle and inner ramp. Also, based on the shape of γ- Ray log, There sediment were deposited in marine environment. In open marine and barrier environments, The shape of γ- Ray log is serrated bell-shaped, serrated funnel-shaped, left bow-shaped, serrated shape and right boxcar shape, Whole in the beach environment it is cylinder and funnel shape and in lagoon and tidal flat environment can be seen on right bow to cylinder-shaped. Based on the isolith maps, sandstone of lower zones of the Asmari Formation in Marun Oilfield expanded by deltaic system along the southwestern margin of the basin and influenced by changes in sea level constantly. Sequence stratigraphic analysis led to identification of three third- order (DS1, DS2 and DS3 depositional sequences.

  2. Sequence Stratigraphy of lower zones of Asmari Formation in Marun Oilfield by using of microfacies analysis, isolith maps and γ- Ray log

    Ahmad Mirmarghabi

    2015-02-01

    Full Text Available The Oligo- Miocene Asmari Formation is one of the most important reservoir units of the Marun Oilfield in Dezful Embayment SW Iran, deposited in Zagros foreland basin. The goal of this study is to interpret depositional environment and sequence stratigraphy of lower zones of the Asmari Formation in Well No.281, 342 and 312in Marun Oilfield based on changes in the shape of γ- Ray, isolith maps and microfacies properties. Accordingly, identification of 9 carbonate microfacies and 2 siliciclastic petrofacies were identified that are deposited in four depositional environment including open marine, barrier, lagoon and tidal flat in a homoclinal ramp (consisting of outer, middle and inner ramp. Also, based on the shape of γ- Ray log, There sediment were deposited in marine environment. In open marine and barrier environments, The shape of γ- Ray log is serrated bell-shaped, serrated funnel-shaped, left bow-shaped, serrated shape and right boxcar shape, Whole in the beach environment it is cylinder and funnel shape and in lagoon and tidal flat environment can be seen on right bow to cylinder-shaped. Based on the isolith maps, sandstone of lower zones of the Asmari Formation in Marun Oilfield expanded by deltaic system along the southwestern margin of the basin and influenced by changes in sea level constantly. Sequence stratigraphic analysis led to identification of three third- order (DS1, DS2 and DS3 depositional sequences.

  3. Characterization of Elevated Temperature Properties of Heat Exchanger and Steam Generator Alloys

    Wright, J.K.; Carroll, L.J.; Benz, J.K.; Simpson, J.A.; Wright, R.N.; Lloyd, W.R.; Chapman, J.A.

    2010-01-01

    The Next Generation Nuclear Plant project is considering Alloy 800H and Alloy 617 for steam generator and intermediate heat exchangers. It is envisioned that a steam generator would operate with reactor outlet temperatures from 750 to 800 C, while an intermediate heat exchanger for primary to secondary helium would operate up to an outlet temperature of 950 C. Although both alloys are of interest due in part to their technical maturity, a number of specific properties require further characterization for design of nuclear components. Strain rate sensitivity of both alloys has been characterized and is found to be significant above 600 C. Both alloys also exhibit dynamic strain aging, characterized by serrated flow, over a wide range of temperatures and strain rates. In general dynamic strain aging is observed to begin at higher temperatures and serrated flow persists to higher temperatures in Alloy 617 compared to Alloy 800H. Dynamic strain aging is a concern for these materials since it is observed to result in reduced ductility for many solid solution alloys. The role of dynamic strain aging in the creep-fatigue behavior of Alloy 617 at temperatures of 800 C and above has also been examined in detail. Serrated flow is found to persist in cyclic stress-strain curves up to nearly the cycle to failure in some temperature and strain regimes. Results of those experiments and implications for creep-fatigue testing protocols will be described.

  4. Microstructural Evaluations of Baseline HSR/EPM Disk Alloys

    Gabb, Timothy P.; Garg, Anita; Ellis, David L.

    2004-01-01

    Six alloys representing two classes of powder metallurgy nickel-based superalloys were examined by transmission electron microscopy (TEM) and phase extraction. Alloys KM4, CH98, IN-100 and 456 are based on a Ni-18Co-12Cr composition while alloys Rene' 88 DT and SR 3 have lower Al and Co and higher Cr contents. The lambda size distributions were determined from quantitative image analysis of the TEM images. The volume fraction of lambda and carbides and the composition of the phases were determined by a combination of phase extraction and TEM. The results showed many similarities in lambda size distributions, grain boundary serrations, and grain boundary carbide frequencies between alloys KM4, CH98, 456, Rene' 88 DT and SR 3 when heat treated to give an approximate grain size of ASTM 6. The density of grain boundary carbides in KM4 was shown to substantially increase as the grain size increased. IN-100 and 456 subjected to a serration cooling heat treatment had much more complex lambda size distributions with very large intergranular and intragranular secondary lambda as well as finer than average cooling and aging lambda. The grain boundary carbides in IN-100 were similar to the other alloys, but 456 given the serration cooling heat treatment had a more variable density of grain boundary carbides. Examination of the phases extracted from the matrix showed that there were significant differences in the phase chemistries and elemental partitioning ratios between the various alloys.

  5. Contamination of mercury in the biological and physical environment of northwest Quebec

    Delisle, C E

    1977-10-01

    Mercury and its compounds are present in the environment of northwest Quebec and present serious risks to human health. This study shows that all bodies of water investigated yield fish with mercury concentrations in excess of the Canadian safe limit (0.5 ppm) for human consumption. Data are reported for total mercury in 902 fishes from 58 bodies of water sampled between 1972 and 1976. Out of these, 158 were Coregonus clupeaformis with an average concentration of 0.27 ppm of mercury, 82 were Catostomus commersoni with 0.38 ppm, 287 were Stizostedion vitreum vitreum with 0.79 ppm, 364 were Esox lucius with 0.84 ppm, and 11 were Acipenser fulvescens with 0.36 ppm. It is concluded that walleye and pike are rarely safe to eat in northwest Quebec. Data on limited numbers of molluscs, benthic organisms, plankton, aquatic birds and aquatic mammals from this area are also reported and show only a few in excess of the safe level. Exceptions are found in ducks, grebes, mergansers and otters, mink and marten. Mercury in sediments varied from 50 ppb (background level) to more than 1000 ppb, depending on the body of water and its proximity to zones of influence of human activity. Surface waters rarely exceed 0.20 ppb mercury even in areas where sediment contamination is high. Ground water reached 48 ppb in some areas, however, suggesting contamination from natural sources.

  6. Rare birds in Slovenia in 2016 – Slovenian Rarities Committee Report

    Hanžel Jurij

    2017-11-01

    Full Text Available This report by the Slovenian Rarities Committee presents records of rare bird species in Slovenia in 2016, with some addenda for previous years. The numbers in brackets refer to the number of records (first number and individuals (second number recorded between 1 Jan 1950 and 31 Dec 2015. Since 1 Jan 2013, submission to the Committee has been required for 37 additional species, 17 of which are regional rarities. Records of these species are not numbered, since records from previous years were not collected by the Committee. Two new species, Scopoli’s Shearwater Calonectris diomedea and Arctic Tern Sterna paradisaea, were added to Category A. Other notable observations were the second record of Lesser Yellowlegs Tringa flavipes, third and fourth records of Pallid Swift Apus pallidus, fifth to seventh records of Long-legged Buzzard Buteo rufinus and the sixth and seventh records of Gannet Morus bassanus. Twelve records of Pallid Harrier Circus macrourus are an all-time annual high. Among Category E species, the Hooded Merganser Lophodytes cucullatus was recorded for the second time. The list of birds recorded in Slovenia (as of 31 Dec 2016 contains 388 species (373 in Category A, 6 in Category B, 9 exclusively in Category C; 4 species are both in Categories A and C. Category D contains 6 species, while Category E contains 38, two of which are classified into Subcategory E*. These two categories are not part of the list.

  7. Determination of Screw and Nail Withdrawal Resistance of Some Important Wood Species

    Alper Aytekin

    2008-04-01

    Full Text Available In this study, screw and nail withdrawal resistance of fir (Abies nordmanniana, oak (Quercus robur L. black pine (Pinus nigra Arnold and Stone pine (Pinus pinea L. wood were determined and compared. The data represent the testing of withdrawal resistance of three types of screws as smart, serrated and conventional and common nails. The specimens were prepared according to TS 6094 standards. The dimensions of the specimens were 5x5x15cm and for all of the directions. Moreover, the specimens were conditioned at ambient room temperature and 65±2% relative humidity. The screws and nails were installed according to ASTM-D 1761 standards. Nail dimensions were 2.5mm diameter and 50 mm length, conventional screws were 4x50mm, serrated screws were 4x45mm and smart screws were 4x50mm. Results show that the maximum screw withdrawal resistance value was found in Stone pine for the serrated screw. There were no significant differences between Stone pine and oak regarding screw withdrawal resistance values. Conventional screw yielded the maximum screw withdrawal resistance value in oak, followed by Stone pine, black pine and fir. Oak wood showed the maximum screw withdrawal resistance value for the smart screw, followed by Stone pine, black pine, and fir. Oak wood showed higher nail withdrawal resistances than softwood species. It was also determined that oak shows the maximum nail withdrawal resistance in all types. The nail withdrawal resistances at the longitudinal direction are lower with respect to radial and tangential directions.

  8. Influence of damping coefficient from permanent magnets on chatter formation during end milling of titanium alloy (Ti-6Al-4V)

    Sulaiman, S A; Amin, A N

    2015-01-01

    In machining operations, chatter is undesirable due to its adverse effects on the product quality, operation cost, machining accuracy and machine tool life. It is also responsible for reducing output. Chatter is a self-excitation phenomenon occurring in machine tools, in which the cutting process tends to lower the damping capacity of the machine structural components ending in an unstable behavior of the system. Chatter arises due to resonance when the vibrations of the instability of chip formation and the natural vibration modes of the machine-system components coincide. This paper focuses on the influence of damping coefficient from permanent magnets on chip serration frequency as an approach of minimizing chatter in end milling of Titanium alloy (Ti6Al4V). The method consists of two ferrite permanent magnet bars (dimensions: 1' × 6' × 3'), mounted 5mm from the cutting tool using a specially designed fixture which provided a uniform magnetic field of 2500-2700 Gausses. A titanium alloy Ti6Al4V block was then end milled using uncoated WC-Co inserts. A sequence of 15 experimental runs was conducted based on a small Central Composite Design (CCD) model in Response Surface Methodology (RSM). The primary (independent) parameters were: cutting speed, feed, and depth of cut. The data acquisition system comprised a vibration sensor (accelerometer) and a signal conditioning unit was used to measure the vibration data. The resultant vibrations were then analyzed using the DASYLab 5.6 software. Machining tests were conducted for two different conditions - with and without the application of magnets. Scanning Electron Microscope (SEM) was used to measure the chip segmentations. The SEM analysis of chip serrations demonstrated that the chip serration frequency were more stable while cutting under the presence of permanent magnets due to lower intensity of chatter. (paper)

  9. Elevated-temperature tensile properties of three heats of commercially heat-treated Alloy 718

    Booker, M.K.; Booker, B.L.P.

    1980-03-01

    Three heats of commercially heat-treated alloy 718 were tensile tested over the temperature range from room temperature to 816 degree C and at nominal strain rates from 6.7 x 10 -6 to 6.7 x 10 -3 /s. We examined data for yield strength, ultimate tensile strength, uniform elongation, total elongation, and reduction in area and also inspected tensile stress-strain behavior. Yield and ultimate tensile strengths for commercially heat-treated alloy 718 decrease very gradually with temperature from room temperature up to about 600 degree C for a strain rate of 6.7 x 10 -5 /s or to about 700 degree C for a strain rate of 6.7 x 10 -4 /s. Above these temperatures the strength drops off fairly rapidly. Reduction in area and total elongation data show minimum around 700 degree C, with each ductility measure falling to 10% or less at the minimum. This minimum is more pranced and occurs at lower temperatures as strain rate decreases. Up to about 600 degree C the ductility is typically around 30%. As the temperature reaches 816 degree C the ductility again increases to perhaps 60%. The uniform elongation (plastic strain at peak load) decreases only slightly with temperature to about 500 degree C then drops off rapidly and monotonically with temperature, reaching values less than 1% at 816 degree C. At the highest test temperatures the load maximum may result, not from necking of the specimen, but from overaging of the precipitation-hardened microstructure. Stress-strain curves showed serrated deformations in the temperature range from 316 to 649 degree C, although they occur only for the faster strain rates at the supper end of this temperature range. The serrations can be quite large, involving load drops of perhaps 40 to 80 MPa. The serrations typically begin within the first 2% of deformation and continue until fracture, although exceptions were noted. 16 refs., 14 figs., 3 tabs

  10. Molecular features of colorectal polyps presenting Kudo’s type II mucosal crypt pattern: are they based on the same mechanism of tumorigenesis?

    Shinmura, Kensuke; Konishi, Kazuo; Yamochi, Toshiko; Kubota, Yutaro; Yano, Yuichiro; Katagiri, Atsushi; Muramoto, Takashi; Kihara, Toshihiro; Tojo, Masayuki; Konda, Kenichi; Tagawa, Teppei; Yanagisawa, Fumito; Kogo, Mari; Makino, Reiko; Takimoto, Masafumi; Yoshida, Hitoshi

    2014-01-01

    Background and study aims: The molecular features of serrated polyps (SPs) with hyperplastic crypt pattern, also called Kudo’s type II observed by chromoendoscopy, were evaluated. Methods: The clinicopathological and molecular features of 114 SPs with a hyperplastic pit pattern detected under chromoendoscopy (five dysplastic SPs, 63 sessile serrated adenoma/polyps (SSA/Ps), 36 microvesicular hyperplastic polyps (MVHPs), and 10 goblet cell-rich hyperplastic polyps (GCHPs)) were examined. The frequency of KRAS and BRAF mutations and CpG island methylator phenotype (CIMP) were investigated. Results: Dysplastic SPs and SSA/Ps were frequently located in the proximal colon compared to others (SSA/Ps vs. MVHPs or GCHPs, P GCHP (60 % for dysplastic SPs, 44 % for SSA/Ps, 47 % for MVHPs, and 0 % for GCHPs). The frequency of CIMP was higher in dysplastic SPs or SSA/Ps than in MVHPs or GCHPs (60 % for dysplastic SPs, 56 % for SSA/Ps, 32 % for MVHPs, and 10 % for GCHPs) (SSA/Ps vs. GCHP, P = 0.0068). When serrated neoplasias (SNs) and MVHPs were classified into proximal and distal lesions, the frequency of CIMP was significantly higher in the proximal compared to the distal SNs (64 % vs. 11 %, P = 0.0032). Finally, multivariate analysis showed that proximal location and BRAF mutation were significantly associated with an increased risk of CIMP. Conclusions: Distinct molecular features were observed between proximal and distal SPs with hyperplastic crypt pattern. Proximal MVHPs may develop more frequently through SSA/Ps to CIMP cancers than distal MVHPs. PMID:26134964

  11. Molecular features of colorectal polyps presenting Kudo's type II mucosal crypt pattern: are they based on the same mechanism of tumorigenesis?

    Shinmura, Kensuke; Konishi, Kazuo; Yamochi, Toshiko; Kubota, Yutaro; Yano, Yuichiro; Katagiri, Atsushi; Muramoto, Takashi; Kihara, Toshihiro; Tojo, Masayuki; Konda, Kenichi; Tagawa, Teppei; Yanagisawa, Fumito; Kogo, Mari; Makino, Reiko; Takimoto, Masafumi; Yoshida, Hitoshi

    2014-09-01

    The molecular features of serrated polyps (SPs) with hyperplastic crypt pattern, also called Kudo's type II observed by chromoendoscopy, were evaluated. The clinicopathological and molecular features of 114 SPs with a hyperplastic pit pattern detected under chromoendoscopy (five dysplastic SPs, 63 sessile serrated adenoma/polyps (SSA/Ps), 36 microvesicular hyperplastic polyps (MVHPs), and 10 goblet cell-rich hyperplastic polyps (GCHPs)) were examined. The frequency of KRAS and BRAF mutations and CpG island methylator phenotype (CIMP) were investigated. Dysplastic SPs and SSA/Ps were frequently located in the proximal colon compared to others (SSA/Ps vs. MVHPs or GCHPs, P GCHP (60 % for dysplastic SPs, 44 % for SSA/Ps, 47 % for MVHPs, and 0 % for GCHPs). The frequency of CIMP was higher in dysplastic SPs or SSA/Ps than in MVHPs or GCHPs (60 % for dysplastic SPs, 56 % for SSA/Ps, 32 % for MVHPs, and 10 % for GCHPs) (SSA/Ps vs. GCHP, P = 0.0068). When serrated neoplasias (SNs) and MVHPs were classified into proximal and distal lesions, the frequency of CIMP was significantly higher in the proximal compared to the distal SNs (64 % vs. 11 %, P = 0.0032). Finally, multivariate analysis showed that proximal location and BRAF mutation were significantly associated with an increased risk of CIMP. Distinct molecular features were observed between proximal and distal SPs with hyperplastic crypt pattern. Proximal MVHPs may develop more frequently through SSA/Ps to CIMP cancers than distal MVHPs.

  12. MLH1-deficient Colorectal Carcinoma With Wild-type BRAF and MLH1 Promoter Hypermethylation Harbor KRAS Mutations and Arise From Conventional Adenomas.

    Farchoukh, Lama; Kuan, Shih-Fan; Dudley, Beth; Brand, Randall; Nikiforova, Marina; Pai, Reetesh K

    2016-10-01

    Between 10% and 15% of colorectal carcinomas demonstrate sporadic DNA mismatch-repair protein deficiency as a result of MLH1 promoter methylation and are thought to arise from sessile serrated adenomas, termed the serrated neoplasia pathway. Although the presence of the BRAF V600E mutation is indicative of a sporadic cancer, up to 30% to 50% of colorectal carcinomas with MLH1 promoter hypermethylation will lack a BRAF mutation. We report the clinicopathologic and molecular features of MLH1-deficient colorectal carcinoma with wild-type BRAF and MLH1 promoter hypermethylation (referred to as MLH1-hypermethylated BRAF wild-type colorectal carcinoma, n=36) in comparison with MLH1-deficient BRAF-mutated colorectal carcinoma (n=113) and Lynch syndrome-associated colorectal carcinoma (n=36). KRAS mutations were identified in 31% of MLH1-hypermethylated BRAF wild-type colorectal carcinomas compared with 0% of MLH1-deficient BRAF-mutated colorectal carcinomas and 37% of Lynch syndrome-associated colorectal carcinomas. When a precursor polyp was identified, MLH1-hypermethylated BRAF wild-type colorectal carcinomas arose from precursor polyps resembling conventional tubular/tubulovillous adenomas in contrast to MLH1-deficient BRAF-mutated colorectal carcinomas, which arose from precursor sessile serrated adenomas (PMLH1-hypermethylated BRAF wild-type colorectal carcinoma and MLH1-deficient BRAF-mutated colorectal carcinoma had a predilection for the right colon compared with Lynch syndrome-associated colorectal carcinoma (86% vs. 92% vs. 49%, P0.05). In conclusion, our results indicate that MLH1-hypermethylated BRAF wild-type colorectal carcinomas can harbor KRAS mutations and arise from precursor polyps resembling conventional tubular/tubulovillous adenomas.

  13. Influence of damping coefficient from permanent magnets on chatter formation during end milling of titanium alloy (Ti-6Al-4V)

    Sulaiman, S. A.; Amin, A. N.

    2015-12-01

    In machining operations, chatter is undesirable due to its adverse effects on the product quality, operation cost, machining accuracy and machine tool life. It is also responsible for reducing output. Chatter is a self-excitation phenomenon occurring in machine tools, in which the cutting process tends to lower the damping capacity of the machine structural components ending in an unstable behavior of the system. Chatter arises due to resonance when the vibrations of the instability of chip formation and the natural vibration modes of the machine-system components coincide. This paper focuses on the influence of damping coefficient from permanent magnets on chip serration frequency as an approach of minimizing chatter in end milling of Titanium alloy (Ti6Al4V). The method consists of two ferrite permanent magnet bars (dimensions: 1" × 6" × 3"), mounted 5mm from the cutting tool using a specially designed fixture which provided a uniform magnetic field of 2500-2700 Gausses. A titanium alloy Ti6Al4V block was then end milled using uncoated WC-Co inserts. A sequence of 15 experimental runs was conducted based on a small Central Composite Design (CCD) model in Response Surface Methodology (RSM). The primary (independent) parameters were: cutting speed, feed, and depth of cut. The data acquisition system comprised a vibration sensor (accelerometer) and a signal conditioning unit was used to measure the vibration data. The resultant vibrations were then analyzed using the DASYLab 5.6 software. Machining tests were conducted for two different conditions - with and without the application of magnets. Scanning Electron Microscope (SEM) was used to measure the chip segmentations. The SEM analysis of chip serrations demonstrated that the chip serration frequency were more stable while cutting under the presence of permanent magnets due to lower intensity of chatter.

  14. The behavior of plastic deformation in a duplex Cu-Zn alloy, in the temperature range 24-3000C

    Andrade, A.H.P. de.

    1978-01-01

    The mechanical behavior of Muntz Metal (Cu-40%Zn) containing duplex microstructure with a coarse grain size approximately 40μm) has been investigated at the temperature range 2 0 -300 0 C, and at strain rat e of epsilon=2.6x10 -4 S -1 , as a function of the second phase volume fraction(v(subβ)). Whereas at room temperature yielding increases with v(subβ) for v(subβ)>0.35, it remains virtually independent of v(subβ in the range 0.26 0 C. At low temperature (RT) and strains (epsilon approximately 0.01 the work hardening rate increases strongly with v subβ up to v subβ approximately 0.45. At higher temperatures and strains work hardening rate decreases for all volume fractions due to the thermal and dynamic recovery respectively. Then ultimate tensile strength (UTS) at room temperature increases with v subβ up to v subβ = 0.45, thus resulting in overall increase in U.T.S. The Portevin - Le Chatelier Effect (PLE)in Muntz Metal, at the temperature range 24 0 -300 0 C manifests itself in essentially two different forms. At RT, irregular serrations are observed, where amplitude decreases with increases in v subβ. At higher temperatures (100 0 C), serrations become regular, with increase in amplitude. At 200 0 C or over the serrations amplitude decrease at almost disappearing completely. These observations have been explained on the basis of collective behavior of mobile dislocations, influenced by the internal stress fields created during deformation by the presence of phase β. The Voce equation fits well with the experimental stress-strain data for temperatures up to 200 0 C. The method of Hollomon requires the use of stages in sigma-epsilon curve, curve, which does not have a physical significance. (Author) [pt

  15. Influence of γ' precipitates on Portevin–Le Chatelier effect of Ni-based superalloys

    Cai, Yulong [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027 (China); Tian, Chenggang [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Fu, Shihua, E-mail: fushihua@ustc.edu.cn [CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027 (China); Han, Guoming [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Cui, Chuanyong, E-mail: chycui@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Zhang, Qingchuan, E-mail: zhangqc@ustc.edu.cn [CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027 (China)

    2015-06-25

    The γ′ precipitate plays a critical role in improving the mechanical properties of Ni-based superalloys. An undesirable phenomenon referred to as the Portevin–Le Chatelier (PLC) effect always appears in Ni-based superalloys deformed within specific ranges of strain rate and temperature. In order to systematically investigate the influence of the γ′ precipitates on the PLC effect, four Ni-based superalloys with various γ′ contents were designed and fabricated. Microscopic observations from transmission electron microscopy (TEM) indicated that the volume fraction of the γ′ phase was consistent with the designed value. Furthermore, analysis of energy dispersive spectroscopy (EDS) results revealed that the γ matrix of all the alloys consisted of the same components. Uniaxial tensile tests were performed at strain rates and temperatures ranging from 1×10{sup −4} to 3×10{sup −3} s{sup −1} and 300–500 °C, respectively. We found that the ultimate strength increased while the elongation decreased with increasing γ′ content. In addition, the serration changed from type A to type B and to type C with increasing temperature, decreasing strain rate or increasing γ′ content; the amplitude of type B serrations was described by unimodal or bimodal distributions. Increasing volume fraction of γ′ precipitates shifted the region in which the PLC effect occurred, to the range of low temperatures and high strain rates. Moreover, the serration amplitude increased with increasing γ′ content at a given temperature, which indicated that the γ′ precipitate increases the dynamic strain ageing (DSA) effect.

  16. Associations between colorectal cancer molecular markers and pathways with clinicopathologic features in older women.

    Samadder, N Jewel; Vierkant, Robert A; Tillmans, Lori S; Wang, Alice H; Weisenberger, Daniel J; Laird, Peter W; Lynch, Charles F; Anderson, Kristin E; French, Amy J; Haile, Robert W; Potter, John D; Slager, Susan L; Smyrk, Thomas C; Thibodeau, Stephen N; Cerhan, James R; Limburg, Paul J

    2013-08-01

    Colorectal tumors have a large degree of molecular heterogeneity. Three integrated pathways of carcinogenesis (ie, traditional, alternate, and serrated) have been proposed, based on specific combinations of microsatellite instability (MSI), CpG island methylator phenotype (CIMP), and mutations in BRAF and KRAS. We used resources from the population-based Iowa Women's Health Study (n = 41,836) to associate markers of colorectal tumors, integrated pathways, and clinical and pathology characteristics, including survival times. We assessed archived specimens from 732 incident colorectal tumors and characterized them as microsatellite stable (MSS), MSI high or MSI low, CIMP high or CIMP low, CIMP negative, and positive or negative for BRAF and/or KRAS mutations. Informative marker data were collected from 563 tumors (77%), which were assigned to the following integrated pathways: traditional (MSS, CIMP negative, BRAF mutation negative, and KRAS mutation negative; n = 170), alternate (MSS, CIMP low, BRAF mutation negative, and KRAS mutation positive; n = 58), serrated (any MSI, CIMP high, BRAF mutation positive, and KRAS mutation negative; n = 142), or unassigned (n = 193). Multivariable-adjusted Cox proportional hazards regression models were used to assess the associations of interest. Patients' mean age (P = .03) and tumors' anatomic subsite (P = .0001) and grade (P = .0001) were significantly associated with integrated pathway assignment. Colorectal cancer (CRC) mortality was not associated with the traditional, alternate, or serrated pathways, but was associated with a subset of pathway-unassigned tumors (MSS or MSI low, CIMP negative, BRAF mutation negative, and KRAS mutation positive) (n = 96 cases; relative risk = 1.76; 95% confidence interval, 1.07-2.89, compared with the traditional pathway). We identified clinical and pathology features associated with molecularly defined CRC subtypes. However, additional studies are needed to determine how these features

  17. Microglanis pataxo, a new catfish from southern Bahia coastal rivers, northeastern Brazil (Siluriformes: Pseudopimelodidae)

    Sarmento-Soares,Luisa M.; Martins-Pinheiro,Ronaldo F.; Aranda,Arion T.; Chamon,Carine C.

    2006-01-01

    A new pseudopimelodid catfish of the genus Microglanis, collected in small rivers at the lower and middle Peruípe, middle Jucuruçu and Cahy basins, in the southeastern coast of the Bahia state, is described. The new species has a comparatively high number of anal fin proximal radials, 12, shaped as thin tubes, the last one bearing a laminar extension; a pectoral fin spine with a bony point and with a smaller number of serrations on its posterior border; seven pleural ribs and a narrow head wi...

  18. Nesaeoduvalius (gen. n. vailatii sp. n., from Euboia island (Eastern Greece (Coleoptera: Carabidae, Trechinae

    Achille Casale

    2016-06-01

    Full Text Available Nesaeoduvalius (new genus vailatii Casale & Giachino, new species (Coleoptera: Carabidae: Trechini is described and illustrated from the Euboia (Evvia island (eastern Greece. The new taxon belongs to the Duvalius “isotopic” trechine lineage, but is markedly characterized by the peculiar combination of several morphological features in the general shape, chaetotaxy of head, serrate lateral margins of elytra, and features of male genitalia (both in median lobe of aedeagus and endophallus. Its putative position amongst the trechines of the Duvalius phyletic lineage is discussed. Data on the distribution and habitat of this new, insular and unexpected taxon are also provided.

  19. Tsallis q-triplet, intermittent turbulence and Portevin-Le Chatelier effect

    Iliopoulos, A. C.; Aifantis, E. C.

    2018-05-01

    In this paper, we extend a previous study concerning Portevin-LeChatelier (PLC) effect and Tsallis statistics (Iliopoulos et al., 2015). In particular, we estimate Tsallis' q-triplet, namely {qstat, qsens, qrel} for two sets of stress serration time series concerning the deformation of Cu-15%Al alloy corresponding to different deformation temperatures and thus types (A and B) of PLC bands. The results concerning the stress serrations analysis reveal that Tsallis q- triplet attains values different from unity ({qstat, qsens, qrel} ≠ {1,1,1}). In particular, PLC type A bands' serrations were found to follow Tsallis super-q-Gaussian, non-extensive, sub-additive, multifractal statistics indicating that the underlying dynamics are at the edge of chaos, characterized by global long range correlations and power law scaling. For PLC type B bands' serrations, the results revealed a Tsallis sub-q-Gaussian, non-extensive, super-additive, multifractal statistical profile. In addition, our results reveal also significant differences in statistical and dynamical features, indicating important variations of the stress field dynamics in terms of rate of entropy production, relaxation dynamics and non-equilibrium meta-stable stationary states. We also estimate parameters commonly used for characterizing fully developed turbulence, such as structure functions and flatness coefficient (F), in order to provide further information about jerky flow underlying dynamics. Finally, we use two multifractal models developed to describe turbulence, namely Arimitsu and Arimitsu (A&A) [2000, 2001] theoretical model which is based on Tsallis statistics and p-model to estimate theoretical multifractal spectrums f(a). Furthermore, we estimate flatness coefficient (F) using a theoretical formula based on Tsallis statistics. The theoretical results are compared with the experimental ones showing a remarkable agreement between modeling and experiment. Finally, the results of this study verify, as

  20. Radiation-induced cancer of the esophagus after postoperative irradiation for breast cancer

    Ito, Ichiro; Miyaishi, Kazuo; Mitsuhashi, Norio; Ito, Jun; Inoue, Tomio

    1978-01-01

    Two cases of radiation-induced cancer of the esophagus after postoperative irradiation for breast cancer were reported. Latent period of case 1 (cervical esophagus) was 12 years, and case 2 (middle thoracic esophagus) was 16 years. Radiographically the lesions were both serrated, and histologically, case 1 was ''poorly differentiated'' and case 2 was ''moderately differentiated'' squamous cell carcinoma. Histological types of basic breast cancer were both papillotubular carcinomas. Previous irradiation doses were 4180 rads for case 1 and 1860 rads for case 2. The esophageal cancers were remarkably improved by radiation therapy. It should be emphasized that radiation therapy is useful for the radiation-induced cancer of the esophagus. (author)

  1. Shoulder distention arthrography as a treatment modality

    Kang, Heung Sik; Park, Chan Sup; Kim, Jin Ho; Kim, Sang Bum

    1987-01-01

    18 patients with painful stiff shoulder joint were underwent shoulder distension arthrography as a treatment modality, followed by physical therapy. Range of motion of shoulder joint was evaluated at 1 week and 4 weeks after arthrography. The results were as follows; 1. Arthrographic findings were decreased volume of joint cavity, obliteration of axillary recess, small subscapularis bursa, serrated capsular margin and non-filling of biceps tendon sheath. In 3 cases, rotator cuff tear was found. 2. Range of motion of shoulder joint was improved after distension arthrography. 3. In 3 patients have rotator cuff tear, range of motion was not improved

  2. Study of the infestation rate of the kidney and spleen of domestic ruminants by Linguatula serrata nymphs in Urmia slaughterhouse

    S Rasouli

    2009-02-01

    Full Text Available In this study, the prevalence of Linguatula serrata nymphs in kidneys and spleens of 800 domestic ruminants (cattle, buffalo, sheep and goat in different sexes, ages and seasons was investigated. First, the kidneys and spleens were examined macroscopically. Then, a digestion method was also applied. Infestation rate in the spleen of cattle, buffalo, sheep and goat were %0/5, %0, %0/5 and %1/5 respectively. No infestation was found in the kidneys. The results of this study shows that the infestation of domestic ruminants to Linguatula serrat nymphs in different sexes and ages were not significant. Also the infestation rate in different seasons was not significant.

  3. Plasticity of ductile metallic glasses: a self-organized critical state.

    Sun, B A; Yu, H B; Jiao, W; Bai, H Y; Zhao, D Q; Wang, W H

    2010-07-16

    We report a close correlation between the dynamic behavior of serrated flow and the plasticity in metallic glasses (MGs) and show that the plastic deformation of ductile MGs can evolve into a self-organized critical state characterized by the power-law distribution of shear avalanches. A stick-slip model considering the interaction of multiple shear bands is presented to reveal complex scale-free intermittent shear-band motions in ductile MGs and quantitatively reproduce the experimental observations. Our studies have implications for understanding the precise plastic deformation mechanism of MGs.

  4. A new species of Microglanis (Siluriformes: Pseudopimelodidae from upper rio Paraná basin, Brazil

    Oscar Akio Shibatta

    Full Text Available Microglanis garavelloi, new species, collected in tributaries of rio Paranapanema and rio Tietê, is the first species of the genus described from upper rio Paraná basin. The new species can be distinguished from other species of Microglanis on morphometric characters, color pattern, caudal-fin shape, pectoral-spine morphology and lateral line development. Characters used specifically to distinguish M. garavelloi from M. cottoides (laguna dos Patos and rio Uruguay basins and M. parahybae (rio Paraíba do Sul basin include morphometrics, color pattern and pectoral-spine serration.

  5. Investigation of Mechanical Properties and Plastic Deformation Behavior of (Ti45Cu40Zr10Ni5100−xAlx Metallic Glasses by Nanoindentation

    Lanping Huang

    2014-01-01

    Full Text Available The effect of Al addition on mechanical properties and plastic deformation behavior of (Ti45Cu40Zr10Ni5100−xAlx (x = 0, 2, 4, 6 and 8 amorphous alloy ribbons have been investigated by nanoindentation. The hardness and elastic modulus do not simply increase with the increase of Al content. The alloy with 8 at.% Al exhibits the highest hardness and elastic modulus. The serrations or pop-in events are strongly dependent on the loading rate and alloy composition.

  6. Diagnosing lynch syndrome in absence of colorectal cancer.

    Lynch, Henry T; Knezetic, Joseph; Lanspa, Stephen

    2012-11-01

    There are many ways in which a diagnosis of Lynch syndrome can be made, most prominent of which is family history, presence of cancer, high microsatellite instability, immunohistochemistry, and a mismatch repair germline mutation. There are at least four molecular pathways for colorectal cancer carcinogenesis: 1) adenoma-carcinoma sequence; 2) hereditary microsatellite instability; 3) serrated pathway; 4) epidermal growth factor receptor. The answer to diagnosing Lynch syndrome in the absence of colorectal cancer may be partially based upon the phenotypic characteristics of the colonic polyps should they be identified at colonoscopy, specifically their phenotypic characteristics of location, size, histology, number, and age of polyp onset.

  7. Fetal antigen 1, a member of the epidermal growth factor superfamily, in neurofibromas and serum from patients with neurofibromatosis type 1

    Jensen, Charlotte Harken; Schroder, H D; Teisner, B

    1999-01-01

    Fetal antigen 1 (FA1) is a 26-32 kDa glycoprotein containing six epidermal growth factor-like repeats closely related to the delta/notch/serrate proteins in Drosophila. FA1 has been shown to be involved in cell differentiation in a juxtacrine/paracrine manner. As neurofibromatosis type 1 (NF-1......), also called von Recklinghausen disease, involves aberrant growth of tissues derived from the neural crest, the expression of FA1 was examined in neurofibroma skin biopsies and serum from patients with NF-1. FA1 was found in the spindle cells of all (n = 10) skin tumour specimens from adult NF-1...

  8. Effect of aging and cold working on the high-temperature low-cycle fatigue behavior of alloy 800H. Part I. The effect of hardening processes on the initial stress--strain curve

    Villagrana, R.E.; Kaae, J.L.; Ellis, J.R.; Gantzel, P.K.

    1978-01-01

    The individual and combined effects of cold working (5 and 10%) and aging (4000 and 8000 h at 538 to 760 0 C) on the microstructure and high-temperature yield strength of alloy 800H have been investigated. The specimens were tested at the aging temperatures. During testing some of the specimens showed the phenomenon of serrated yielding. In order of importance, the principal hardening agents observed in this work were: cold work, the precipitation of Cr 23 C 6 at the grain boundaries, and, in some cases, the precipitation of a Perovskite-type γ' phase in the grain interiors

  9. Clinical and Biological Features of Interval Colorectal Cancer

    Yu Mi Lee

    2017-05-01

    Full Text Available Interval colorectal cancer (I-CRC is defined as a CRC diagnosed within 60 months after a negative colonoscopy, taking into account that 5 years is the “mean sojourn time.” It is important to prevent the development of interval cancer. The development of interval colon cancer is associated with female sex, old age, family history of CRC, comorbidities, diverticulosis, and the skill of the endoscopist. During carcinogenesis, sessile serrated adenomas/polyps (SSA/Ps share many genomic and colonic site characteristics with I-CRCs. The clinical and biological features of I-CRC should be elucidated to prevent the development of interval colon cancer.

  10. The mode of progression of subperiosteal resorption in the hyperparathyroidism of chronic renal future

    Meema, H.E.; Oreopoulos, D.G.; Toronto Univ., Ontario

    1983-01-01

    Subperiosteal resorption in finger phalanges is usually thought to be the result of osteoclastic bone resorption on the periosteal surface of bone, progressive centripetally with creation of the serrated appearances and ''lace-like'' patterns in periosteal cortical bone. Our longitudinal microradioscopic observations in patients with secondary hyperparathyroidism of chronic renal failure have revealed evidence of another pathogenetic mechanism: by the enlargement of intracortical juxtaperiosteal resorption spaces, the remaining thin layer of bone is broken down from inside the bone, i.e., a centrifugal rather then centripetal process. (orig.)

  11. Interpreting the stress–strain response of Al micropillars through gradient plasticity

    Zhang, Xu; Aifantis, Katerina E.; Ngan, Alfonso H.W.

    2014-01-01

    Micropillar compression has fascinated the materials and mechanics communities for over a decade, due to the unique stochastic effects and slip zones that dictate their stress–strain curves and microstructure. Although plethora studies exist that capture experimentally the mechanical response of various types of micropillars, limited theoretical models can interpret the observed behavior. Particularly, single crystal micropillars exhibit multiple serrations in their stress–strain response, indicating the activation of slip zones, while bi-crystal pillars, in which the grain boundary lies parallel to the pillar axis, do not display such serrations, but rather a distinct “knee”, which indicates dislocation pileups at the grain boundary. In-situ synchrotron microdiffraction experiments have illustrated that not only dislocations, but also significant plastic strain gradients develop during micropillar compression. In the present study, therefore, appropriate gradient plasticity models that can account for the pillar microstructure, are successfully used to capture the stress–strain response of single- and bi-crystal Al pillars

  12. X-Ray Fluorescence and Laser-Induced Breakdown Spectroscopy analysis of Roman silver denarii

    Pardini, L. [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); El Hassan, A. [National Institute for Laser- Enhanced Sciences (NILES), Cairo University Giza (Egypt); Ferretti, M. [Istituto per le Tecnologie Applicate ai Beni Culturali, Area della Ricerca del CNR di Montelibretti Roma (Italy); Foresta, A.; Legnaioli, S.; Lorenzetti, G. [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Nebbia, E. [Universita degli Studi di Torino (Italy); Catalli, F. [Monetiere di Firenze, Museo Archeologico Nazionale Firenze (Italy); Harith, M.A. [National Institute for Laser- Enhanced Sciences (NILES), Cairo University Giza (Egypt); Diaz Pace, D. [Institute of Physics ' Arroyo Seco' , Faculty of Science, Tandil (Argentina); Anabitarte Garcia, F. [Photonics Engineering Group, University of Cantabria, Santander (Spain); Scuotto, M. [Dipartimento di Scienze Archeologiche, Via Galvani 1, 56126 Pisa (Italy); Palleschi, V., E-mail: vincenzo.palleschi@cnr.it [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Dipartimento di Scienze Archeologiche, Via Galvani 1, 56126 Pisa (Italy)

    2012-08-15

    In this paper we present the results of a study performed on a large collection of silver Roman republican denarii, encompassing about two centuries of history. The joint use of Laser-Induced Breakdown Spectroscopy (LIBS) and X-Ray Fluorescence (XRF) spectroscopy allowed for an accurate determination of the coins' elemental composition; the measurements, performed mostly in situ at the 'Monetiere' in Florence, revealed a striking connection between the 'quality' of the silver alloy and some crucial contemporary events. This finding was used to classify a group of denarii whose dating was otherwise impossible. The comparison with other contemporary denarii disproves a recent theory on the origin of the so called 'serrated' denarii (denarii showing notched chisel marks on the edge of the coin). - Highlights: Black-Right-Pointing-Pointer We studied a large collection of Roman republican silver denarii. Black-Right-Pointing-Pointer XRF and LIBS allowed to determine the precious metal content of the coins. Black-Right-Pointing-Pointer A correlation of the 'quality' of the alloy with some contemporary events was found. Black-Right-Pointing-Pointer The study allowed to controvert a recent theory on the so called 'serrated' denarii.

  13. The somatic mutation landscape of premalignant colorectal adenoma.

    Lin, Shu-Hong; Raju, Gottumukkala S; Huff, Chad; Ye, Yuanqing; Gu, Jian; Chen, Jiun-Sheng; Hildebrandt, Michelle A T; Liang, Han; Menter, David G; Morris, Jeffery; Hawk, Ernest; Stroehlein, John R; Futreal, Andrew; Kopetz, Scott; Mishra, Lopa; Wu, Xifeng

    2017-06-12

    There are few studies which characterised the molecular alterations in premalignant colorectal adenomas. Our major goal was to establish colorectal adenoma genome atlas and identify molecular markers of progression from colorectal adenoma to adenocarcinoma. Whole-exome sequencing and targeted sequencing were carried out in 149 adenoma samples and paired blood from patients with conventional adenoma or sessile serrated adenoma to characterise the somatic mutation landscape for premalignant colorectal lesions. The identified somatic mutations were compared with those in colorectal cancer (CRC) samples from The Cancer Genome Atlas. A supervised random forest model was employed to identify gene panels differentiating adenoma from CRC. Similar somatic mutation frequencies, but distinctive driver mutations, were observed in sessile serrated adenomas and conventional adenomas. The final model included 20 genes and was able to separate the somatic mutation profile of colorectal adenoma and adenocarcinoma with an area under the curve of 0.941. The findings of this project hold potential to better identify patients with adenoma who may be candidates for targeted surveillance programmes and preventive interventions to reduce the incidence of CRC. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  14. Kinematics of deformation bands in an austenitic FeMnC TWIP steel

    Chateau, J P; Jacques, A; Lebedkina, T A; Lebyodkin, M A; Allain, S

    2010-01-01

    Tensile tests on a Fe22Mn0.6C steel at room temperature and different strain rates show serrations on the curves similar to Portevin-Le Chatelier (PLC) serrations of type A, associated with negative strain rate sensitivity. Propagation of deformation bands have been observed by high-rate extensometry over more than two orders of magnitude of the applied strain rate. This constitutes a remarkable difference with the PLC effect which shows a transition to static bands (type B or C) when the applied strain rate decreases. In this steel, bands moving as slow as a few tenth of mm/s are observed instead of static bands, which is two orders of magnitude lower than what is reported for type A PLC bands. This emphasises a strong correlation between plastic events, also confirmed by multifractal analysis of the tensile curves. Twinning which is responsible of the high strain hardening rate of this steel at room temperature is discussed as one of mechanisms of correlation between instabilities.

  15. Numerical analysis on interactions between fluid flow and structure deformation in plate-fin heat exchanger by Galerkin method

    Liu, Jing-cheng; Wei, Xiu-ting; Zhou, Zhi-yong; Wei, Zhen-wen

    2018-03-01

    The fluid-structure interaction performance of plate-fin heat exchanger (PFHE) with serrated fins in large scale air-separation equipment was investigated in this paper. The stress and deformation of fins were analyzed, besides, the interaction equations were deduced by Galerkin method. The governing equations of fluid flow and heat transfer in PFHE were deduced by finite volume method (FVM). The distribution of strain and stress were calculated in large scale air separation equipment and the coupling situation of serrated fins under laminar situation was analyzed. The results indicated that the interactions between fins and fluid flow in the exchanger have significant impacts on heat transfer enhancement, meanwhile, the strain and stress of fins includes dynamic pressure of the sealing head and flow impact with the increase of flow velocity. The impacts are especially significant at the conjunction of two fins because of the non-alignment fins. It can be concluded that the soldering process and channel width led to structure deformation of fins in the exchanger, and degraded heat transfer efficiency.

  16. Morphological and molecular diagnostics of Phytoseiulus persimilis and Phytoseiulus macropilis (Acari: Phytoseiidae).

    Okassa, Mireille; Tixier, Marie-Stéphane; Kreiter, Serge

    2010-11-01

    This study focuses on the diagnostics of two natural enemy species, belonging to the genus Phytoseiulus in the family Phytoseiidae (sub-family Amblyseiinae): P. macropilis and P. persimilis. These two species are of primary importance in biological control all over the world. However, they are morphologically very similar and specific diagnostics is difficult. This study utilizes mitochondrial molecular markers (12S rRNA and Cytb mtDNA) to differentiate these two species. Morphological analyses showed significant differences between P. persimilis and P. macropilis for 17 morphological characters of the 32 considered. However, despite these significant differences, the ranges of all characters overlap. Only the serration of the macroseta on the basitarsus (StIV) allows the differentiation between P. persimilis and P. macropilis. Despite these small morphological differences, molecular results, for both mitochondrial DNA fragments considered (rRNA and Cytb mtDNA), showed a clear delineation between the specimens of P. macropilis and P. persimilis. This study emphasizes (i) that only one morphological character (serration of the seta StIV) clearly separates these two species, and (ii) the usefulness of an automatical molecular and simple diagnostic tool for accurate differentiation of the two species and ensure the morphological diagnostics. Further studies are proposed, including more DNA sequences especially for P. macropilis.

  17. Microstructure and strain-stress analysis of the dynamic strain aging in inconel 625 at high temperature

    Maj, P.; Zdunek, J.; Mizera, J.; Kurzydlowski, K. J.; Sakowicz, B.; Kaminski, M.

    2017-01-01

    Serrated flow is a result of unstable plastic flow, which occurs during tensile and compression tests on some dilute alloys. This phenomenon is referred as the Portevin Le-Chatelier effect (PLC effect). The aim of this research was to investigate and analyze this phenomenon in Inconel 625 solution strengthened superalloy. The tested material was subjected to tensile tests carried out within the temperature range 200-700 °C, with three different strain rates: 0.002 1/s, 0.01/s, and 0.05 1/s and additional compression tests with high deformation speeds of 0.1, 1, and 10 1/s. The tensile strain curves were analyzed in terms of intensity and the observed patterns of serrations Using a modified stress drop method proposed by the authors, the activation energy was calculated with the assumption that the stress drops' distribution is a direct representation of an average solute atom's interaction with dislocations. Subsequently, two models, the standard vacancy diffusion Bilby-Cottrell model and the realistic cross-core diffusion mechanism proposed by Zhang and Curtin, were compared. The results obtained show that the second one agrees with the experimental data. Additional microstructure analysis was performed to identify microstructure elements that may be responsible for the PLC effect. Based on the results, the relationship between the intensity of the phenomenon and the conditions of the tests were determined.

  18. Efficacy of intradermal mesotherapy in cellulite reduction - Conventional and high-frequency ultrasound monitoring results.

    Sylwia, Malinowska; Krzysztof, Mlosek Robert

    2017-10-01

    Cellulite affects the majority of women and is an unacceptable cosmetic defect. Therefore, effective methods for cellulite reduction are being sought. Intradermal mesotherapy is one of such methods. The aim of the study was to assess the efficacy of intradermal mesotherapy in cellulite reduction, using conventional and high-frequency ultrasound. Twenty-one women with cellulite underwent a series of intradermal mesotherapy procedures. The following parameters were assessed: thickness of epidermis, dermis and hypodermis, echogenicity of dermis and the surface area of serrated hypodermis-dermis junction. Furthermore, the thigh circumference was measured; body mass index and cellulite severity were assessed based on photographs using Nürnberger-Müller's scale. Intradermal mesotherapy reduced severity of cellulite. The surface area of serrated hypodermis-dermis junction and hypodermis thickness decreased significantly as compared to baseline. Cellulite reduction was also confirmed by palpation, decreased thigh circumference and the Nürnberger-Müller's grade. There were no statistically significant changes in epidermis or dermis thickness, body weight and the BMI. Intradermal mesotherapy offers effective cellulite reduction. It is a simple and safe treatment, which makes it popular. Further research in mesotherapy is essential due to a limited number of published studies. Ultrasound is a useful method to monitor intradermal mesotherapy and assess its efficacy.

  19. Association of meat intake and meat-derived mutagen exposure with the risk of colorectal polyps by histologic type

    Fu, Zhenming; Shrubsole, Martha J.; Smalley, Walter E.; Wu, Huiyun; Chen, Zhi; Shyr, Yu; Ness, Reid M.; Zheng, Wei

    2011-01-01

    Background The association of meat intake and meat-derived mutagens with colorectal tumor risk remains unclear. We evaluated this hypothesis in a large colonoscopy-based case-control study. Methods Included in the study were 2,543 polyp patients [(1,881 with adenomas, and 622 with hyperplastic polyp (HPP)] and 3,764 polyp-free controls. Surveys obtained information about meat intake by cooking methods and doneness levels plus other suspected or known risk factors for colorectal tumors. Unconditional logistic regression was used to derive odds ratios (ORs) after adjusting for potential confounders. Results High intake of red meat and processed meat (P-trend meat cooked using high-temperature cooking methods (P-trend ≤ 0.01), was associated with an elevated risk for colorectal polyps. A significant positive association between exposures to meat-derived heterocyclic amines and risk of polyps was found for both adenomas and hyperplastic polyps. Furthermore, the positive association with red-meat intake and heterocyclic amine exposure was stronger for multiple adenomas than single adenoma and serrated than non-serrated adenomas. Conclusion This study supports a role for red meat and meat-derived mutagen exposure in the development of colorectal tumor. PMID:21803984

  20. Anomalous yielding in the complex metallic alloy Al13Co4

    Walter, C.; Wheeler, J.M.; Barnard, J.S.; Raghavan, R.; Korte-Kerzel, S.; Gille, P.; Michler, J.; Clegg, W.J.

    2013-01-01

    The single crystal deformation behaviour of orthorhombic Al 13 Co 4 has been studied below the brittle-ductile transition temperature observed in bulk material from room temperature to 600 °C, using indentation, microcompression and transmission electron microscopy. At room temperature, slip occurred most easily by dislocation motion on the (0 0 1)[0 1 0] slip system, as observed in the ductile regime at high temperatures. However, as the temperature was increased towards 600 °C, the slip pattern changed to one consisting of linear defects running perpendicular to the loading axis. Serrated flow was observed at all temperatures, although at 600 °C the magnitude of the serrations decreased. Anomalous yielding behaviour was also observed above 226 °C, where both the yield and the 2% flow stress increased with temperature, almost doubling between 226 and 600 °C. It has been suggested that this might arise due to the increasing stability of orthorhombic Al 13 Co 4 with respect to the monoclinic form with increasing temperature. This is shown to be consistent with the theoretical predictions that exist

  1. Joining mechanism of Ti/Al dissimilar alloys during laser welding-brazing process

    Chen Shuhai; Li Liqun; Chen Yanbin; Huang Jihua

    2011-01-01

    Research highlights: → The microstructures of interfacial zones were confirmed in detail by transmission electron microscope (TEM). Interfacial reaction layers of brazing joint were composed of α-Ti, nanosize granular Ti 7 Al 5 Si 12 and serration-shaped TiAl 3 . For the first time, obvious stacking fault structure in intermetallic phase TiAl 3 was found when the thickness of the reaction layer was very thin (approximately below 1 μm). → Metallurgical characteristics for laser welding-brazing process in the environment of far from equilibrium was expounded by microstructures of the joints, the characteristics of thermal process and element diffusion behavior. - Abstract: Joining mechanism of Ti/Al dissimilar alloys was investigated during laser welding-brazing process with automated wire feed. The microstructures of fusion welding and brazing zones were analysed in details by transmission electron microscope (TEM). It was found that microstructures of fusion welding zone consist of α-Al grains and ternary near-eutectic structure with α-Al, Si and Mg 2 Si. Interfacial reaction layers of brazing joint were composed of α-Ti, nanosize granular Ti 7 Al 5 Si 12 and serration-shaped TiAl 3 . For the first time, apparent stacking fault structure in intermetallic phase TiAl 3 was found when the thickness of the reaction layer was very thin (approximately less than 1 μm). Furthermore, crystallization behavior of fusion zone and mechanism of interfacial reaction were discussed in details.

  2. Cryogenic properties of austenitic stainless steels for superconducting magnet

    Nohara, K.; Kato, T.; Ono, Y.; Sasaki, T.; Suzuki, S.

    1983-01-01

    The present study examines the magnetic and mechanical properties of a variety of austenitic stainless steels and high maganese steel which are candidate materials for the superconducting magnet attached to high energy particle accelerators. The effect of a specified heat treatment for the precipitation of intermetallic compound Nb3Sn to be used as superconductor on ductility and toughness are especially examined. It is found that nitrogen-strengthened austenitic stainless steels have high strength and good ductility and toughness, but that these are destroyed by precipitation treatment. The poor ductility and toughness after precipitation are caused by a weakening of the grain boundaries due to the agglomerated chromium carbide percipitates. The addition of vanadium suppresses this effect by refining the grain. Austenitic steels are found to have low magnetic permeabilities and Neel temperatures, and show serrated flow in traction test due to strained martensitic transformation. High manganese steel has extremely low permeability, a Neel temperature about room temperature, and has a serrated flow in traction test due to adiabatic deformation at liquid helium temperature

  3. Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718

    Bing Wang

    2018-03-01

    Full Text Available The paper aims to investigate the influences of material constitutive and fracture parameters in addition to cutting speed on chip formation during high-speed cutting of Inconel 718. Finite element analyses for chip formation are conducted with Johnson–Cook constitutive and fracture models. Meanwhile, experiments of high-speed orthogonal cutting are performed to verify the simulation results with cutting speeds ranging from 50 m/min to 7000 m/min. The research indicates that the chip morphology transforms from serrated to fragmented at the cutting speed of 7000 m/min due to embrittlement of the workpiece material under ultra-high cutting speeds. The parameter of shear localization sensitivity is put forward to describe the influences of material mechanical properties on serrated chip formation. The results demonstrate that the effects of initial yield stress and thermal softening coefficient on chip shear localization are much more remarkable than the other constitutive parameters. For the material fracture parameters, the effects of initial fracture strain and exponential factor of stress state on chip shear localization are more much prominent. This paper provides guidance for controlling chip formation through the adjustment of material mechanical properties and the selection of appropriate cutting parameters.

  4. Effects of microstructures and creep conditions on the fractal dimension of grain boundary fracture in high-temperature creep of heat-resistant alloys

    Tanaka, Manabu

    1993-01-01

    The effects of microstructural aspects, such as grain size and grain boundary configuration, and creep conditions on the fractal dimension of the grain boundary fracture were examined using several heat-resistant alloys, principally in an analysis scale range between one grain boundary length and specimen size. Grain boundary fracture surface profiles in the heat-resistant alloys exhibited a fractal nature in the scale range between one grain boundary length and specimen size as well as in the scale range below one grain boundary length. The fractal dimension of the grain boundary fracture slightly increased with decreasing grain size and was generally a little larger in the specimens with serrated grain boundaries than in those with straight grain boundaries. The fractal dimension of the grain boundary and the number of grain boundary microcracks which affected the grain boundary fracture patterns were a little larger in the specimen with the smaller grain size, and were also larger in the specimen with serrated grain boundaries. The fractal dimension of the grain boundary fracture increased with decreasing creep stress in the temperature range from 973 to 1422 K in these alloys, since more grain boundary microcracks existed in the specimens ruptured under the lower stresses at the higher temperatures. (orig.) [de

  5. Variability of morphological needle traits of Scots pine (Pinus sylvestris L. among populations from mountain and lowland regions of Poland

    Łabiszak Bartosz

    2017-06-01

    Full Text Available The main goal of this work was to examine interpopulational needle traits variability of Scots pine (Pinus sylvestris L. from four mountain, one foothill and three lowland, natural populations located in Poland. This choice of locations was motivated by the presumed different origins of mountainous populations and the necessity to demonstrate how closely they are related to lowland populations. Variation in the studied populations was determined using seven morphological traits of needles: 1 - needle length, 2 - number of stomatal rows on the flat side of a needle, 3 - number of stomata per 2 mm of needle length on the flat side, 4 - number of stomatal rows on the convex side of a needle, 5 - number of stomata per 2 mm of needle length on the convex side, 6 - number of serrations per 2 mm of the needle length on the left side and 7 - number of serrations per 2 mm of the needle length on the right side. Biometric data were analysed statistically, and it was found that (i needle traits differentiate studied populations; (ii the postulated division of the population into two groups is reflected in the obtained results; and (iii a particularly strong relationship was found between two relict pine populations from the Pieniny (Sokolica, Kazalnica, Czertezik and Tatra Mts. (Wielke Koryciska, which may be the result of the common origins and history of these two populations

  6. Spherical shock-wave propagation in three-dimensional granular packings.

    Xue, Kun; Bai, Chun-Hua

    2011-02-01

    We investigate numerically the spherical shock-wave propagation in an open dense granular packing perturbed by the sudden expansion of a spherical intruder in the interior of the pack, focusing on the correlation between geometrical fabrics and propagating properties. The measurements of the temporal and spatial variations in a variety of propagating properties define a consistent serrated wave substructure with characteristic length on the orders of particle diameters. Further inspection of particle packing reveals a well-defined particle layering that persists several particle diameters away from the intruder, although its dominant effects are only within one to two diameters. This interface-induced layering not only exactly coincides with the serrated wave profile, but also highlights the competition between two energy transmission mechanisms involving distinct transport speeds. The alternating dominances between these two mechanisms contribute to the nonlinear wave propagation on the particle scale. Moreover, the proliferation of intricate three-dimensional contact force networks suggests the anisotropic stress transmission, which is found to also arise from the localized packing structure in the vicinity of the intruder.

  7. LMI1-like genes involved in leaf margin development of Brassica napus.

    Ni, Xiyuan; Liu, Han; Huang, Jixiang; Zhao, Jianyi

    2017-06-01

    In rapeseed (Brassica napus L.), leaf margins are variable and can be entire, serrate, or lobed. In our previous study, the lobed-leaf gene (LOBED-LEAF 1, BnLL1) was mapped to a 32.1 kb section of B. napus A10. Two LMI1-like genes, BnaA10g26320D and BnaA10g26330D, were considered the potential genes that controlled the lobed-leaf trait in rapeseed. In the present study, these two genes and another homologous gene (BnaC04g00850D) were transformed into Arabidopsis thaliana (L.) Heynh. plants to identify their functions. All three LMI1-like genes of B. napus produced serrate leaf margins. The expression analysis indicated that the expression level of BnaA10g26320D determined the difference between lobed- and entire-leaved lines in rapeseed. Therefore, it is likely that BnaA10g26320D corresponds to BnLL1.

  8. Dilatancy induced ductile-brittle transition of shear band in metallic glasses

    Zeng, F.; Jiang, M. Q.; Dai, L. H.

    2018-04-01

    Dilatancy-generated structural disordering, an inherent feature of metallic glasses (MGs), has been widely accepted as the physical mechanism for the primary origin and structural evolution of shear banding, as well as the resultant shear failure. However, it remains a great challenge to determine, to what degree of dilatation, a shear banding will evolve into a runaway shear failure. In this work, using in situ acoustic emission monitoring, we probe the dilatancy evolution at the different stages of individual shear band in MGs that underwent severely plastic deformation by the controlled cutting technology. A scaling law is revealed that the dilatancy in a shear band is linearly related to its evolution degree. A transition from ductile-to-brittle shear bands is observed, where the formers dominate stable serrated flow, and the latter lead to a runaway instability (catastrophe failure) of serrated flow. To uncover the underlying mechanics, we develop a theoretical model of shear-band evolution dynamics taking into account an atomic-scale deformation process. Our theoretical results agree with the experimental observations, and demonstrate that the atomic-scale volume expansion arises from an intrinsic shear-band evolution dynamics. Importantly, the onset of the ductile-brittle transition of shear banding is controlled by a critical dilatation.

  9. Atomic mechanism of shear localization during indentation of a nanostructured metal

    Sansoz, F.; Dupont, V.

    2007-01-01

    Shear localization is an important mode of deformation in nanocrystalline metals. However, it is very difficult to verify the existence of local shear planes in nanocrystalline metals experimentally. Sharp indentation techniques may provide novel opportunities to investigate the effect of shear localization at different length scales, but the relationship between indentation response and atomic-level shear band formation has not been fully addressed. This paper describes an effort to provide direct insight on the mechanism of shear localization during indentation of nanocrystalline metals from atomistic simulations. Molecular statics is performed with the quasi-continuum method to simulate the indentation of single crystal and nanocrystalline Al with a sharp cylindrical probe. In the nanocrystalline regime, two grain sizes are investigated, 5 nm and 10 nm. We find that the indentation of nanocrystalline metals is characterized by serrated plastic flow. This effect seems to be independent of the grain size. Serration in nanocrystalline metals is found to be associated with the formation of shear bands by sliding of aligned interfaces and intragranular slip, which results in deformation twinning

  10. Hemipristicola gunterae gen. n., sp. n. (Cestoda: Tetraphyllidea: Phyllobothriidae) from the snaggletooth shark, Hemipristis elongata (Carcharhiniformes: Hemigaleidae), from Moreton Bay, Australia.

    Cutmore, Scott C; Theiss, Susan M; Bennett, Michael B; Cribb, Thomas H

    2011-09-01

    Helminthological examination of the snaggletooth shark, Hemipristis elongata (Klunzinger) (Carcharhiniformes: Hemigaleidae), from Moreton Bay, Queensland, Australia, yielded a phyllobothriid genus and species previously unknown to science. Hemipristicola gunterae gen. n., sp. n. is described here, and is placed in the subfamily Phyllobothriinae Braun, 1900. Of the other phyllobothriid genera, the new genus most closely resembles Paraorygmatobothrium in that both genera possess bothridia with a single loculus and apical sucker, post-vaginal testes and lateral vitellarium. Hemipristicola, however, differs from Paraorygmatobothrium in the morphology of the proximal bothridial surface microthrix, possessing serrate gladiate spinitriches with marginal serrations restricted to the distal half of the blade, and in the possession of a more extensive uterus, extending anteriorly from the anterior margin of the ovary to well past the level of the cirrus-sac. The new genus also differs from Paraorygmatobothrium by possessing testes that are more than one layer deep. Hemipristicola gunterae further differs from Paraorygmatobothrium species found in hemigaleid sharks in possessing vitelline follicles arranged in two lateral bands that are restricted to the lateral margins of the proglottid and not possessing a cephalic peduncle. Bayesian inference analysis of partial 28S rDNA data shows that H. gunterae forms a sister taxon to species of Paraorygmatobothrium. These two genera were resolved with high posterior probability support in the analysis. Hemipristicola gunterae is only the second phyllobothriid species to be described from Hemipristis elongata from Australian waters, and the fourth from the Australian hemigaleids.

  11. Features of dynamic strain aging in high strength Al-Zn-Mg-Cu alloy

    Peng Kaiping; Chen Wenzhe; Zhang Haoguo; Qian Kuangwu [Fuzhou Univ., Fujian (China)

    1997-08-30

    The present work investigates mainly the regulation and features of the occurrence of serrated yielding phenomenon of a high strength Al-Zn-Mg-Cu alloy LC4 under various heat treatments and loading conditions. The main results are: (1) In the serrated yielding temperature region a critical transition temperature T{sub t} exists. The critical plastic strain has a negative or positive temperature coefficient within the temperature region lower or higher than T{sub t}; (2) The reason for this phenomenon might be the existence of an absorbed resource which diminishes the pinning effect of solute atoms to mobile dislocations; (3) in the positive coefficient region two reverse thermal activation processes occur simultaneously. One is the solute atoms diffuse to the moving dislocations and pin the dislocations. The other one is the absorbed resource absorbs the solute and diminishes the pinning effect; (4) for LC4, the activation energy of the first process is equivalent to the diffusion activation energy of Mg in Al matrix and the second one is equivalent to that of the interface absorbed solute atoms. (orig.) 6 refs.

  12. Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V

    Islam Shyha

    2018-03-01

    Full Text Available Microstructure and chip formation were evaluated during the step shoulder down-milling of Ti-6Al-4V using a water-miscible vegetable oil-based cutting fluid. Experiments were conducted using the Cut-list fluid supply system previous developed by the authors and a conventional cutting fluid supply system. A thin plastically deformed layer below the machined surface was observed during the metallurgical investigation of the surfaces produced using both systems. Despite noticeable reductions in cutting fluid consumption achieved by Cut-list, no significant disparity was found in microstructural damage. The microstructure of the machined surfaces was strongly affected by cutting speed and fluid flow rate with a discontinuous serrated chip being the principal type. However, increases in cutting fluid flow rate associated with increased cutting speed significantly changed chip morphology where average distance between chip segments increased with cutting speed. Cut-list produced smaller saw-tooth height and larger segmented width, while the transition from aperiodic to periodic serrated chip formation was governed by cutting speed and feed rate. Chip segmentation frequency and shear angle were also sensitive to cutting speed.

  13. Setal morphology of grooming appendages in the spider crab, Libinia dubia.

    Wortham, Jen L; LaVelle, Amanda D

    2016-08-01

    In crustaceans, grooming behaviors decrease fouling by removing debris from the exoskeleton and body structures; these grooming behaviors improve respiration, sensory reception, movement, and reproduction. Setal morphologies of the following grooming appendages in the decapod crustacean spider crab Libinia dubia are examined including the first pereiopod (cheliped), first, second, and third maxillipeds (mouthparts), and first, second, and third epipods (internal extensions of the maxillipeds). The objective of this study was to describe setal morphologies of these grooming appendages and to elucidate possible functions and efficiencies of setal structures. Spider crabs are hypothesized to have elaborate setal morphologies, mainly for cleaning specialized decorating setae as well as for cleaning inside the gill chamber, which has a higher likelihood of becoming fouled compared to other decapods such as shrimps. Fourteen setal types are documented and included several varieties of serrate and pappose setae as well as simple setae, cuspidate setae, papposerrate setae, and canoe setae. Maxillipodal epipods in the gill chamber are free of fouling, suggesting the setation on the third maxilliped protopod has an efficient functional morphology in removing debris before water enters the gill chamber. Serrate setae may function for detangling and separating structures whereas pappose setae may function for fine detailed grooming. The cheliped is the only grooming appendage that can reach decorating setae and it contains only pappose setae; thus decorating setae is not likely groomed in a manner that would greatly decrease fouling. J. Morphol. 277:1045-1061, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  14. Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718.

    Wang, Bing; Liu, Zhanqiang; Hou, Xin; Zhao, Jinfu

    2018-03-21

    The paper aims to investigate the influences of material constitutive and fracture parameters in addition to cutting speed on chip formation during high-speed cutting of Inconel 718. Finite element analyses for chip formation are conducted with Johnson-Cook constitutive and fracture models. Meanwhile, experiments of high-speed orthogonal cutting are performed to verify the simulation results with cutting speeds ranging from 50 m/min to 7000 m/min. The research indicates that the chip morphology transforms from serrated to fragmented at the cutting speed of 7000 m/min due to embrittlement of the workpiece material under ultra-high cutting speeds. The parameter of shear localization sensitivity is put forward to describe the influences of material mechanical properties on serrated chip formation. The results demonstrate that the effects of initial yield stress and thermal softening coefficient on chip shear localization are much more remarkable than the other constitutive parameters. For the material fracture parameters, the effects of initial fracture strain and exponential factor of stress state on chip shear localization are more much prominent. This paper provides guidance for controlling chip formation through the adjustment of material mechanical properties and the selection of appropriate cutting parameters.

  15. AC loss characteristics of Bi2223/Ag sheathed tape wires subjected to mechanical strains and stresses

    Tsukamoto, Osami; Li, Z

    2007-01-01

    The influence of uniaxial tensile stress-strain on the AC loss characteristics of multifilamentary Bi2223/Ag sheathed tape wires was investigated. The uniaxial tensile stress-strain was applied to the sample wire in liquid nitrogen at atmospheric pressure, and the AC losses (transport, magnetization and total losses) were measured by an electric method. Two kinds of wire, oxide-dispersion strengthened Ag-alloy sheathed and Ag-alloy sheathed wires, were tested. The stress-strain curves of the tested wires were divided in three regions, i.e. elastic deformation, continuous plastic deformation and serrated-like plastic deformation regions, though the ranges of those regions were different for different kinds of wire. In the elastic and continuous plastic regions, the stress-strain curve was smooth and continuous, and in the serrated-like plastic region, the curve was rough. In the serrated-like plastic region, the wires kept elongating, while increase of the tensile stress was suspended. Dependences of the critical currents on the stress-strain were generally as follows. While decreases of the wire critical currents were in the range of less than 4% of the original values of the no-stress condition, the critical currents of the wires were reversible, that is, the critical currents recovered the original values at zero stress when the stress were released, regardless of whether the wires were in the elastic or continuous plastic region. In the continuous plastic region, the critical currents decreased up to 10%-15% of the original values and the critical currents were irreversible when the degradations of the critical currents exceeded about 4%. In the serrated-like plastic regions, the critical currents were more severely degraded. The AC loss characteristics of the wires are different in those regions. In the elastic and continuous plastic regions, the absolute values of AC losses were dependent on the stress-strain. However, the dependences of those normalized

  16. Developing a wintering waterfowl community baseline for environmental monitoring of Narragansett Bay, Rhode Island [version 3; referees: 1 approved, 2 approved with reservations

    Betty J. Kreakie

    2015-12-01

    Full Text Available In 2004, the Atlantic Ecology Division of the US Environmental Protection Agency’s Office of Research and Development began an annual winter waterfowl survey of Rhode Island’s Narragansett Bay. Herein, we explore the survey data gathered from 2004 to 2011 in order to establish a benchmark understanding of our waterfowl communities and to establish a statistical framework for future environmental monitoring. The abundance and diversity of wintering waterfowl were relatively stable during the initial years of this survey, except in 2010 when there was a large spike in abundance and a reciprocal fall in diversity. There was no significant change in ranked abundance of most waterfowl species, with only Bufflehead (Bucephala albeola and Hooded Merganser (Lophodytes cucllatus showing a slight yet significant upward trend during the course of our survey period. Nonmetric multidimensional scaling (NMDS was used to examine the community structure of wintering waterfowl. The results of the NMDS indicate that there is a spatial structure to the waterfowl communities of Narragansett Bay and this structure has remained relatively stable since the survey began. Our NMDS analysis helps to solidify what is known anecdotally about the bay’s waterfowl ecology, and provides a formalized benchmark for long-term monitoring of Narragansett Bay’s waterfowl communities. Birds, including waterfowl, are preferred bioindicators and we propose using our multivariate approach to monitor the future health of the bay. While this research focuses on a specific area of New England, these methods can be easily applied to novel areas of concern and provide a straightforward nonparametric approach to community-level monitoring. The methods provide a statistic test to examine potential drivers of community turnover and well-suited visualization tools.

  17. Impacts of chemicals on waterfowl reproduction and survival

    White, D.H.; Stickel, L.F.

    1975-01-01

    Residues of organochlorine pesticides, PCB's, heavy metals, and other toxic chemicals are ubiquitous in the biosphere and are commonly found in tissues and eggs of wild birds. This paper reviews research on the effects of these chemicals, with particular reference to waterfowl. Extensive mortality of waterfowl has occurred in the Gulf Coast region as a result of ingestion of aldrin-treated rice seed. Populations of fulvous tree ducks (Dendrocygna bicolor) have declined in recent years in that area. DDE impaired reproduction of both mallards (Anas platyrhynchos) and black ducks (Arias rubripes) in experimental studies, resulting in thin shells, cracked eggs, and poor hatching success. Eggs incubated by the hens broke and cracked more frequently than those in incubators. In the field, residues are higher in ducks that feed on animal material than in vegetarians; differences are pronounced both geographically and among species. Mercury at levels that occur in certain heavily polluted areas in the United States and Canada has, in experimental studies, lowered the reproductive success of mallards and black ducks and reduced the survival of ducklings. Oil spills have killed many waterfowl as a result of oiled feathers and the intake of oil and more indirect physiological effects have been shown experimentally. Pollutants may affect waterfowl indirectly by changing the habitat and directly as a result of intake of toxic substances. They are unlikely to have been directly limiting factors in populations of such species as mallards. Their involvement with problem of other species, including canvasbacks (Aythya valisineria) and mergansers has still to be explored.

  18. Plerocercoids of the cestode Diphyllobothrium ditremum in brown trout Salmo trutta: substantial increase in infection after establishment of European minnow Phoxinus phoxinus.

    Borgstrøm, R; Trømborg, J; Haugen, T O; Rosseland, B O

    2017-09-01

    This study focuses on plerocercoids of the cestode Diphyllobothrium ditremum in brown trout Salmo trutta from the subalpine lake Øvre Heimdalsvatn in south-central Norway. Salmo trutta was the only fish species in this lake until European minnow Phoxinus phoxinus was registered in 1969. The P. phoxinus population increased substantially in the following years. In contrast with the 1969-1972 period, when plerocercoids of D. ditremum were practically absent in S. trutta, there was a high prevalence and intensity of infection in the 2013 S. trutta samples. Because the life cycle of D. ditremum involves two larval stages, in copepods and salmonids and mature worms in piscivorous birds, such as mergansers and loons, a change in feeding ecology of S. trutta or changes in population densities of copepods, fish or birds might have influenced the infection pattern. No relationships between D. ditremum infection and muscle-tissue δ 15 N signature or Hg concentration were found, indicating that infection is not a result of piscivory or cannibalism. Furthermore, consumption of copepods by S. trutta during summer and autumn was low. On the other hand, the number of piscivorous birds has increased, probably due to the presence of P. phoxinus as a new and numerous prey. An increased number of final D. ditremum hosts may have produced a higher output of cestode eggs, resulting in more infected copepods that in turn are consumed by S. trutta. Indirectly, P. phoxinus may therefore have caused the observed increased infection in S. trutta and thereby imposed further negative effects on S. trutta in high mountain areas. © 2017 The Fisheries Society of the British Isles.

  19. New and noteworthy waterfowl records at artificial wetlands from Baja California Sur, Mexico Registros nuevos y sobresalientes de anátidos en humedales artificiales de Baja California Sur, México

    Roberto Carmona

    2011-06-01

    Full Text Available We present 9 recent records of rare waterfowls in Baja California Sur, all of them in artificial wetlands: 3 freshwater sites and 1 concentration area for a saltworks. We present the first records of the Ross's Goose in the state. The remaining 8 species are: Black-bellied Whistling-Duck (breeding, Fulvous Whistling-Duck, Greater White-fronted Goose, Snow Goose, Cackling Goose, Tundra Swan, Mallard and Hooded Merganser. To this list we added an historical compilation of the records of these species in artificial sites of the state. The artificial wetlands are no replacement for their natural counterparts, they are nevertheless an important part of the region's landscape mosaic. As the records of the present work exemplify, this man-made habitat increases the regional species richness, and should be considered as important areas that need to be protected.Presentamos registros recientes de 9 especies de anátidos raros en Baja California Sur, todos ellos realizados en humedales creados por el hombre: 3 sitios dulceacuícolas y 1 área de concentración para la producción de sal. Se incluyen los primeros registros del ganso de Ross (Chen rossii para el estado. Las 8 especies restantes son: Dendrocygna autumnalis (anidación, D. bicolor, Anser albifrons, Chen caerulesens, Branta hutchinsii, Cygnus columbianus, Anas platyrhynchos y Lophodytes cucullatus. A la lista, agregamos una recopilación histórica de los registros de estas especies en humedales artificiales del estado. Aunque estos sitios no deben sustituir a sus contrapartes naturales, actualmente forman parte del mosaico paisajístico que ofrece la región; adicionalmente, incrementan la riqueza de especies de la región, por lo que es necesario brindarles protección.

  20. The influence of cooling rate from annealing temperature on the microstructure of Haynes 230

    Sah, Injin; Hong, Sunghoon; Jang, Changheui

    2015-01-01

    The effects of cooling rate from annealing temperature, which simulated the diffusion bonding process, on the microstructure of Haynes 230 (Ni-22Cr-14W-5Co) were investigated. While the grain boundaries are slightly covered with Cr-rich M 23 C 6 carbides for the diffusion-bonded and quenched condition, precipitates were extensively present on/near the grain boundaries for the furnace-cooled specimens. For the furnace-cooled specimens, lamellar precipitates were extensively formed near the grain boundaries below 1 000 deg. C, with intervals of a few hundred nanometers. Also, grain boundaries were severely serrated for the furnace-cooled specimens. Through electron probe micro analysis and transmission electron microscope, the lamellar precipitates were identified as (Cr,W)-rich M 23 C 6 -type lamellar carbides. Despite the differences in microstructure, tensile properties were not much affected by the cooling rate. Creep tests are underway and results will be presented. (authors)

  1. Molecular Diagnostics in Colorectal Carcinoma: Advances and Applications for 2018.

    Bhalla, Amarpreet; Zulfiqar, Muhammad; Bluth, Martin H

    2018-06-01

    The molecular pathogenesis and classification of colorectal carcinoma are based on the traditional adenomaecarcinoma sequence, serrated polyp pathway, and microsatellite instability (MSI). The genetic basis for hereditary nonpolyposis colorectal cancer is the detection of mutations in the MLH1, MSH2, MSH6, PMS2, and EPCAM genes. Genetic testing for Lynch syndrome includes MSI testing, methylator phenotype testing, BRAF mutation testing, and molecular testing for germline mutations in MMR genes. Molecular makers with predictive and prognostic implications include quantitative multigene reverse transcriptase polymerase chain reaction assay and KRAS and BRAF mutation analysis. Mismatch repair-deficient tumors have higher rates of programmed death-ligand 1 expression. Cell-free DNA analysis in fluids are proving beneficial for diagnosis and prognosis in these disease states towards effective patient management. Copyright © 2018 Elsevier Inc. All rights reserved.

  2. [Hereditary colorectal cancer : An update on genetics and entities in terms of differential diagnosis].

    Rau, T T; Dawson, H; Hartmann, A; Rüschoff, J

    2017-05-01

    The pathologist can contribute to recognizing hereditary causes of colorectal cancer via morphology. By identifying so-called index patients, it is possible to take preventive measures in affected families. The precise definition of the clinical presentation and the histopathological phenotype help to narrow the spectrum of expected genetic alterations. Novelties within Lynch syndrome include the recognition of EPCAM as a fifth gene locus, as well as the newly defined Lynch-like syndrome with evidence of somatic mismatch repair (MMR) mutations. With regard to polyposis-associated syndromes, the spectrum of polyps, whether serrated, hamartomatous or classic adenoma, is of crucial importance. The resulting differential diagnosis includes (attenuated) familial adenomatous polyposis ([a]FAP), MUTYH-associated polyposis (MAP), polymerase proofreading-associated polyposis (PPAP), phosphatase and tensin homolog (PTEN) hamartoma tumor syndrome (PHTS), Peutz-Jeghers syndrome and juvenile polyposis, each with a specific genetic background.

  3. Water tribology on graphene.

    N'guessan, Hartmann E; Leh, Aisha; Cox, Paris; Bahadur, Prashant; Tadmor, Rafael; Patra, Prabir; Vajtai, Robert; Ajayan, Pulickel M; Wasnik, Priyanka

    2012-01-01

    Classical experiments show that the force required to slide liquid drops on surfaces increases with the resting time of the drop, t(rest), and reaches a plateau typically after several minutes. Here we use the centrifugal adhesion balance to show that the lateral force required to slide a water drop on a graphene surface is practically invariant with t(rest). In addition, the drop's three-phase contact line adopts a peculiar micrometric serrated form. These observations agree well with current theories that relate the time effect to deformation and molecular re-orientation of the substrate surface. Such molecular re-orientation is non-existent on graphene, which is chemically homogenous. Hence, graphene appears to provide a unique tribological surface test bed for a variety of liquid drop-surface interactions.

  4. Microglanis pataxo, a new catfish from southern Bahia coastal rivers, northeastern Brazil (Siluriformes: Pseudopimelodidae

    Luisa M. Sarmento-Soares

    Full Text Available A new pseudopimelodid catfish of the genus Microglanis, collected in small rivers at the lower and middle Peruípe, middle Jucuruçu and Cahy basins, in the southeastern coast of the Bahia state, is described. The new species has a comparatively high number of anal fin proximal radials, 12, shaped as thin tubes, the last one bearing a laminar extension; a pectoral fin spine with a bony point and with a smaller number of serrations on its posterior border; seven pleural ribs and a narrow head width. We provide information on the external morphology and also on some osteological features for the new species. A key to species is presented for the coastal drainages between Rio de Janeiro and Bahia states.

  5. Tensile behavior of nickel-base single-crystal superalloy DD6

    Xiong, Xinhong, E-mail: xiongxh@whut.edu.cn [School of Logistics Engineering, Wuhan University of Technology, Wuhan 430063 (China); Quan, Dunmiao; Dai, Pengdan; Wang, Zhiping [School of Logistics Engineering, Wuhan University of Technology, Wuhan 430063 (China); Zhang, Qiaoxin [School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070 (China); Yue, Zhufeng [School of Mechanics Civil Engineering and Architecture, Northwestern Polytechnical University, Xi' an 710072 (China)

    2015-06-11

    Tensile behavior of the nickel-base single-crystal superalloy DD6 was studied from room temperature to 1020 °C. The plate specimens were along [001] orientation parallel to the loading axis in tension. The microstructures on the surface and fracture morphology were investigated after tensile test to rupture by scanning electron microscopy (SEM). The results of the present investigation indicate that the yield strength at 650 °C is superior to that at room temperature, 850 °C and 1020 °C. Low ductility and serrated flow in stress–strain curves were also observed at 650 °C. The microstructures on the surface of the plate specimens and fracture morphology observation indicated that localized slip which resulted in glide plane decohesion caused the low ductility of DD6 alloy.

  6. Oxygen-induced restructuring with release of gold atoms from Au(111)

    Min, B.K.; Deng, X.; Schalek, R.; Pinnaduwage, D.; Friend, C.M.

    2005-01-01

    Adsorption of oxygen atoms, achieved via electron-induced dissociation of nitrogen dioxide, induces restructuring of the 'herringbone' to a striped, soliton-wall structure accompanied by release of gold from the 'elbows' in the herringbone structure. The number density of 'elbows' (dislocations corresponding to a change in direction of the reconstruction) decreases as a function of increasing atomic oxygen coverage while the long range order observed in low energy electron diffraction (LEED) changes from (√(3)x22)-rec. to (1x22) in the limit of saturation coverage. Small islands and serrated step edges were formed due to the release of gold atoms from elbow sites of Au(111). The overall structural change of the Au(111) surface may result from the reduction of anisotropy related to the tensile stress relief of the Au(111) surface by oxygen atoms

  7. Mounting clips for panel installation

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph; Valdes, Francisco

    2017-02-14

    An exemplary mounting clip for removably attaching panels to a supporting structure comprises a base, spring locking clips, a lateral flange, a lever flange, and a spring bonding pad. The spring locking clips extend upwardly from the base. The lateral flange extends upwardly from a first side of the base. The lateral flange comprises a slot having an opening configured to receive at least a portion of one of the one or more panels. The lever flange extends outwardly from the lateral flange. The spring bonding flange extends downwardly from the lever flange. At least a portion of the first spring bonding flange comprises a serrated edge for gouging at least a portion of the one or more panels when the one or more panels are attached to the mounting clip to electrically and mechanically couple the one or more panels to the mounting clip.

  8. Oral manifestations of Ellis-van Creveld syndrome

    Ritesh Kalaskar

    2012-01-01

    Full Text Available Ellis-van Creveld syndrome is a rare autosomal-recessive disorder characterized by short limbs, post-axial polydactyly, ectodermal dysplasia, edentulous mandibular incisor region, absence of mucobuccal fold, congenitally missing teeth, slight serrations of the alveolar ridge and multiple small alveolar notches. The clinical report not only describes the classical oral and dental manifestations of Ellis-van Creveld syndrome but also presents unusual findings such as single-rooted and funnel-shaped primary first molars, single conical roots of primary second molars and taurodontisum, which must be considered in the differential diagnostic criteria to avoid misdiagnosis of syndromes. The article also discusses the differential diagnosis and preventive and therapeutic oral health care for these patients. The management of Ellis-van Creveld syndrome is multidisciplinary and, therefore, the oral health care provider should get updated with latest knowledge for timely referral to prevent the patient from further complications of heart defect and bony deformity.

  9. Model of discontinuous plastic flow at temperature close to absolute zero

    Marcinek, Dawid Jarosław; Sgobba, Stefano

    In the present study cryogenic tensile tests performed on different materials (316LN, JK2LB) were used. The discontinuous plastic flow phenomenon was analysed, in order to develop a constitutive model of serrated yielding as a support for analysis of structural materials at low temperatures. Devices and structures, cooled be means of liquid helium, operate at the temperatures equal or lower than 4.2 K, which for the examined materials is below the transition threshold between screw and edge dislocations. It is considered a threshold for the appearance of DPF consisting in cyclic drop of load followed by deformation jumps and generation of heat. Temperature oscillations resulting from the thermodynamic instability in stainless steel can be of the order of dT = 40 K, which is exceptionally dangerous for superconducting cables. Suitably calibrated numerical algorithm allows prediction of the behaviour of the material subjected to deformation at low temperatures. The issues presented in the present study are curr...

  10. FOSSIL REPTILES FROM THE PLEISTOCENE HOMO-BEARING LOCALITY OF BUIA (ERITREA, NORTHERN DANAKIL DEPRESSION

    MASSIMO DELFINO

    2004-12-01

    Full Text Available The early to early-Middle Pleistocene fossil assemblage form the Buia area (Northern Danakil Depression, Eritrea hosts, along with Homo and several other large mammal taxa, the following reptiles: Nile Crocodile, Crocodylus niloticus, Serrated Hinged Terrapin, Pelusios cf. P. sinuatus, Nile Monitor, Varanus niloticus and African Rock Python, Python gr. sebae. All the identified taxa belong to living species. At present, these taxa do not occur in the Northern Danakil depression since it is an arid area. P. sinuatus is not a member of the Eritrean herpetofauna. Although the marked preponderance of the crocodile remains is probably connected to the taphonomy of the sites and the collecting methods used, the ecological value of the reptile fauna corroborates that of the mammals, in indicating a lacustrine or fluvio-deltaic palaeoenvironment and a tropical/subtropical or even sub-Sahelic climate. The Buia remains represent the first reported Eritrean palaeoherpetofauna. 

  11. Effect of thermal cycling on the microstructure of a directionally solidified Fe, Cr, Al-TaC eutectic alloy

    Harf, F. H.; Tewari, S. N.

    1977-01-01

    Cylindrical bars (1.2 cm diameter) of Fe-13.6Cr-3.7Al-9TaC (wt %) eutectic alloy were directionally solidified in a modified Bridgman type furnace at 1 cm/h. The alloy microstructure consisted of aligned TaC fibers imbedded in a bcc Fe-Cr-Al matrix. Specimens of the alloy were thermally cycled from 1100 to 425 C in a burner rig. The effects of 1800 thermal cycles on the microstructure was examined by scanning electron microscopy, revealing a zig-zag shape of TaC fibers aligned parallel to the growth direction. The mechanism of carbide solution and reprecipitation on the (111) easy growth planes, suggested previously to account for the development of irregular serrations in Co-Cr-Ni matrix alloys, is believed to be responsible for these zig-zag surfaces.

  12. Talleres de Genero con grupos de adolescentes y mujeres

    Teresa Kleba Lisboa

    2010-07-01

    Full Text Available Este articulo presenta los resultados de lo Proyecto de Extensión intitulado “Oficinas de Genero con Grupo de Adolescentes y Mujeres” realizado en los Barios Mont Serrat y Jardin Zanelato en la Ciudad de Florianópolis/SC. Del mes de marzo a diciembre de 2008, fueran trabajadas quincenalmente, Talleres con diversas temáticas como “violencia en contra las mujeres, “cuerpo y sexualidad”, “modelos de familia”, y otras, a través de dinámicas que propiciaran la participación de las adolescentes y mujeres objetivando su emancipación. La intervención del Trabajo Social ha proporcionado para las estudiantes y para la maestra una experiencia práctica muy importante y innovadora a la vez que colocamos nuestro saber a lo servicio de las personas excluidas.

  13. Predictive value of radiographic findings in gastritis

    Remley, K.B.; Mann, F.A.; Simons, M.A.

    1986-01-01

    In a retrospective review of biphasic upper gastrointestinal (GI) tract examinations in 300 consecutive patients with abdominal pain, blood loss, nausea and vomiting, weight loss or dysphagia, the author evaluated the frequency of radiographic findings suggestive of gastritis. Forty-eight patients had undergone endoscopy within 1 week of upper GI tract examination. ''Best findings'' were defined by receiver operating characteristic wave analysis of individual findings, including aphthous lesions, serrated or nodular folds, marginal spiculation, and luminal constriction. Most false negative studies were in the fundus or proximal body; most false positive studies were in the antrum. They present a pictorial dictionary of findings and data for use of ''best findings'' to improve sensitivity and specificity in the diagnosis of gastritis

  14. Generation of segmental chips in metal cutting modeled with the PFEM

    Rodriguez Prieto, J. M.; Carbonell, J. M.; Cante, J. C.; Oliver, J.; Jonsén, P.

    2017-09-01

    The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining of Ti6Al4V. In this work the method is revised and applied to study the influence of the cutting speed on the cutting force and the chip formation process. A parametric methodology for the detection and treatment of the rigid tool contact is presented. The adaptive insertion and removal of particles are developed and employed in order to sidestep the difficulties associated with mesh distortion, shear localization as well as for resolving the fine-scale features of the solution. The performance of PFEM is studied with a set of different two-dimensional orthogonal cutting tests. It is shown that, despite its Lagrangian nature, the proposed combined finite element-particle method is well suited for large deformation metal cutting problems with continuous chip and serrated chip formation.

  15. Dynamic strain aging of twinning-induced plasticity (TWIP) steel in tensile testing and deep drawing

    Kim, J.G.; Hong, S.; Anjabin, N.; Park, B.H.; Kim, S.K.; Chin, K.-G.; Lee, S.; Kim, H.S.

    2015-01-01

    The dynamic strain aging (DSA) of metallic materials due to solute atom diffusion to mobile dislocations induce deformation instability with load fluctuations and deformation localizations, hence reducing their sheet formability. In this paper, DSA behaviors of twinning induced plasticity (TWIP) steel with and without Al during tensile testing and deep drawing are investigated in terms of strain localization and the Portevin-Le Chatelier (PLC) band. A theoretical DSA model with internal variables of dislocation density and twin volume fraction is presented for an estimation of strain localization and strain hardening behavior of TWIP steels. The simulation results of the load history and PLC bands during tensile testing and deep drawing are in good agreement with the experimental values. A serration behavior is observed in high-Mn TWIP steels and its tensile residual stress is higher than that in the Al-added TWIP steels, which results in a deformation crack or delayed fracture of deep drawn specimens

  16. Standardization of Schwarz-Christoffel transformation for engineering design of semiconductor and hybrid integrated-circuit elements

    Yashin, A. A.

    1985-04-01

    A semiconductor or hybrid structure into a calculable two-dimensional region mapped by the Schwarz-Christoffel transformation and a universal algorithm can be constructed on the basis of Maxwell's electro-magnetic-thermal similarity principle for engineering design of integrated-circuit elements. The design procedure involves conformal mapping of the original region into a polygon and then the latter into a rectangle with uniform field distribution, where conductances and capacitances are calculated, using tabulated standard mapping functions. Subsequent synthesis of a device requires inverse conformal mapping. Devices adaptable as integrated-circuit elements are high-resistance film resistors with periodic serration, distributed-resistance film attenuators with high transformation ratio, coplanar microstrip lines, bipolar transistors, directional couplers with distributed coupling to microstrip lines for microwave bulk devices, and quasirregular smooth matching transitions from asymmetric to coplanar microstrip lines.

  17. New Analysis of Solute Drag in AA5754 by Precise Determination of Point Defect Generation and the Orowan Relation

    Diak, Brad J.; Penlington, Alex; Saimoto, Shig

    Serrated deformation in Al-Mg alloys creates problems that affect consumer product acceptability. This effect is usually attributed to the Portevin-LeChâtelier effect. In this study the inverse PLC effect due to solute drag on moving dislocations is examined in AA5754. The drag mechanism is dependent on the diffusivity of the solute which is in-turn dependent on the point defect evolution during deformation. Experimental determination of the parabolic James-Barnett drag profile by strain rate change experiments indicates the peak stress is centered at 1.5×10-9m/s, which requires a mechanical formation energy for vacancies of 0.4eV/at. A new slip-based constitutive relation was used to determine the evolution of vacancy volume fraction with deformation with strain, which is greater than the volume fraction of vacancies predicted by the solute drag profile.

  18. Numerical Analysis for Heat Transfer Characteristics of Elliptic Fin-Tube Heat Exchanger with Various Shapes

    Yoo, Jae Hwan; Yoon, Jun Kyu [Gachon Univ., Seongnam (Korea, Republic of)

    2013-04-15

    In this study, the characteristics of the heat transfer coefficient and pressure drop were numerically analyzed according to the axis ratio (A R), pitch, location of vortex generator, and bump phase of the tube surface about an elliptical fin-tube heat exchanger. The boundary condition for CAD analysis was decided as a tube surface temperature of 348 K and inlet air velocity of 1.5 m/s. RCM 7th turbulent model was chosen as the numerical analysis for the sensitivity level. The analysis results indicated that the A R and transverse pitch decreased whereas the heat transfer coefficient increased. On the other hand, there was little difference in the longitudinal pitch. Furthermore, the heat transfer rate was more favorable when the vortex generator was located in front of the tube. Also, the bump phase of the tube surface indicated that the pressure drop and heat transfer were more favorable with the circle type than with the serrated type.

  19. Portevin-Le Chatelier effect in an E911 creep resistant steel with 3%Co additives

    Kipelova, A; Kaibyshev, R; Skorobogatykh, V; Schenkova, I

    2010-01-01

    The effect of tempering temperature on mechanical properties of an E911+3%Co creep resistant steel was investigated. The mechanical tensile tests were carried out at temperatures from 298 to 1073 K and at strain rates varying from 2.1 x 10 -5 s -1 to 2.1 x 10 -1 s -1 . The Portevin-Le Chatelier (PLC) effect was found in the temperature range of 473 to 623 K. Various attributes of dynamic strain aging (DSA) like serrated flow with an acoustic emission were observed. With increasing temperature the ultimate tensile strength (UTS) and the yield strength (YS) increased while the ductility decreased. The dependences of the critical plastic strain on strain rate and temperature exhibited 'inverse' behavior that was associated with concentrated solid solution in the DSA regime.

  20. Combined model of strain-induced phase transformation and orthotropic damage in ductile materials at cryogenic temperatures

    Garion, Cedric

    2003-01-01

    Ductile materials (like stainless steel or copper) show at cryogenic temperatures three principal phenomena: serrated yielding (discontinuous in terms of dsigma/depsilon), plastic strain-induced phase transformations and evolution of ductile damage. The present paper deals exclusively with the two latter cases. Thus, it is assumed that the plastic flow is perfectly smooth. Both in the case of damage evolution and for the gamma-alpha prime phase transformation, the principal mechanism is related to the formation of plastic strain fields. In the constitutive modeling of both phenomena, a crucial role is played by the accumulated plastic strain, expressed by the Odqvist parameter p. Following the general trends, both in the literature concerning the phase transformation and the ductile damage, it is assumed that the rate of transformation and the rate of damage are proportional to the accumulated plastic strain rate. The gamma-alpha prime phase transformation converts the initially homogenous material to a two-p...

  1. Formonsella pyramidosa (Haptophyta, Papposphaeraceae): A new weakly calcified coccolithophore genus from warm-water regions

    Thomsen, Helge Abildhauge; Cros, Lluïsa; Malinverno, Elisa

    2016-01-01

    A new species Formonsella pyramidosa gen. et sp. nov. is described to accommodate a widely distributed warm-water coccolithophore species that has previously been referred to as Pappomonas sp. 2. Formonsella differs from Pappomonas with respect to, in particular, the detailed structure of the rim...... on both calicate and non-calicate coccoliths. In Formonsella the rim comprises two cycles of rod-shaped elements. Although elements in the distal layer are higher at one end, giving this cycle a serrate outline, the overall appearance is very different from the Pappomonas rim which encompasses a distal...... cycle of pentagonal elements, giving the rim a very distinct toothed appearance. Inverted rectangular pyramidal structures terminate the calicate F. pyramidosa coccoliths. In non-calicate coccoliths the central area calcification comprises differently sized tile-shaped elements, mostly arranged along...

  2. Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool

    Zhang Yu; Sato, Yutaka S.; Kokawa, Hiroyuki; Park, Seung Hwan C.; Hirano, Satoshi

    2008-01-01

    In the present study, friction stir welding was applied to commercial purity titanium using a polycrystalline cubic boron nitride tool, and microstructure and hardness in the weld were examined. Additionally, the microstructural evolution during friction stir welding was also discussed. The stir zone consisted of fine equiaxed α grains surrounded by serrate grain boundaries, which were produced through the β → α allotropic transformation during the cooling cycle of friction stir welding. The fine α grains caused higher hardness than that in the base material. A lath-shaped α grain structure containing Ti borides and tool debris was observed in the surface region of the stir zone, whose hardness was the highest in the weld

  3. Negative index effects from a homogeneous positive index prism

    Marcus, Sherman W.; Epstein, Ariel

    2017-12-01

    Cellular structured negative index metamaterials in the form of a right triangular prism have often been tested by observing the refraction of a beam across the prism hypotenuse which is serrated in order to conform to the cell walls. We show that not only can this negative index effect be obtained from a homogeneous dielectric prism having a positive index of refraction, but in addition, for sampling at the walls of the cellular structure, the phase in the material has the illusory appearance of moving in a negative direction. Although many previous reports relied on refraction direction and phase velocity of prism structures to verify negative index design, our investigation indicates that to unambiguously demonstrate material negativity additional empirical evidence is required.

  4. Nanowire failure: long = brittle and short = ductile.

    Wu, Zhaoxuan; Zhang, Yong-Wei; Jhon, Mark H; Gao, Huajian; Srolovitz, David J

    2012-02-08

    Experimental studies of the tensile behavior of metallic nanowires show a wide range of failure modes, ranging from ductile necking to brittle/localized shear failure-often in the same diameter wires. We performed large-scale molecular dynamics simulations of copper nanowires with a range of nanowire lengths and provide unequivocal evidence for a transition in nanowire failure mode with change in nanowire length. Short nanowires fail via a ductile mode with serrated stress-strain curves, while long wires exhibit extreme shear localization and abrupt failure. We developed a simple model for predicting the critical nanowire length for this failure mode transition and showed that it is in excellent agreement with both the simulation results and the extant experimental data. The present results provide a new paradigm for the design of nanoscale mechanical systems that demarcates graceful and catastrophic failure. © 2012 American Chemical Society

  5. Anisotropic Constitutive Model of Strain-induced Phenomena in Stainless Steels at Cryogenic Temperatures

    Garion, C

    2004-01-01

    A majority of the thin-walled components subjected to intensive plastic straining at cryogenic temperatures are made of stainless steels. The examples of such components can be found in the interconnections of particle accelerators, containing the superconducting magnets, where the thermal contraction is absorbed by thin-walled, axisymetric shells called bellows expansion joints. The stainless steels show three main phenomena induced by plastic strains at cryogenic temperatures: serrated (discontinuous) yielding, gamma->alpha' phase transformation and anisotropic ductile damage. In the present paper, a coupled constitutive model of gamma->alpha' phase transformation and orthotropic ductile damage is presented. A kinetic law of phase transformation, and a kinetic law of evolution of orthotropic damage are presented. The model is extended to anisotropic plasticity comprising a constant anisotropy (texture effect), which can be classically taken into account by the Hill yield surface, and plastic strain induced ...

  6. Multifocal Colonic Lesions Detected by {sup 18}F-FDG PET/CT: Correlation with Histopathology and Gross Specimen

    Choi, Byung Wook; Kim, Sung Hoon; Kim, Hae Won; Won, Kyoung Sook; Zeon, Seok Kil [Keimyung University School of Medicine, DaeKolecular Imaging, Daegu (Korea, Republic of)

    2010-09-15

    A fluorodeoxyglucose (FDG) positron emission tomography (PET)-computer tomography (CT) scan for staging. No definite abnormal FDG uptake of the stomach was shown. Incidentally, variable FDG uptake at the bilateral serrates muscles, abdominal muscles and muscles of both thighs (Fig. 1) was observed. He had no significant past medical history except recently diagnosed stomach cancer. On personal interview, he described having had sexual activity the night before the F-18 FDG PET/CT scan, although he was aware of needing to avoid physical activity before a PET scan. The F-18 FDG PET/CT scan was done at 2:00 p.m. Therefore, the hypermetabolism of individual skeletal muscles following sexual activity lasted over 12 h. This case illustrates the hypermetabolism of skeletal muscles following sexual activity as a normal variation.

  7. Interpretasi Lingkungan Pengendapan Formasi Batuan Menggunakan Analisis Elektrofasies di Lokasi Tapak Puspiptek Serpong

    Heri Syaeful

    2017-05-01

    Full Text Available The activity of subsurface material composing site foundation characterization is part of nuclear installation siting study. Characterization conducted by several methods, such as understanding the depositional environment of rock formations. As a segment of depositional environment interpretation method, facies model analysis based on electrofacies provides quicker information on depositional system of rock formation. Methodology applied is gamma ray log (log GR interpretation using relative correlation between log shape variation and sedimentation facies. Based on the analysis, Bojongmanik Formation was deposited on marine-lagoonal environment with very low wave influence. Log GR that shows shape of funnel, serrated, and symmetry, indicate shoreface, lagoon, and tidal point bar facies. The direction of sedimentation, basin, and supply of Bojongmanik Formation interpreted relatively to the north. Serpong Formation deposited on meandering river system, and composed of point bar deposit, crevasse splay, and floodplain deposit. The result of analysis is expected to be guidance in further analysis related to the characterization of foundation materials.

  8. Constitutive model of discontinuous plastic flow at cryogenic temperatures

    Skoczen, B; Bielski, J; Marcinek, D

    2010-01-01

    FCC metals and alloys are frequently used in cryogenic applications, nearly down to the temperature of absolute zero, because of their excellent physical and mechanical properties including ductility. Some of these materials, often characterized by the low stacking fault energy (LSFE), undergo at low temperatures three distinct phenomena: dynamic strain ageing (DSA), plastic strain induced transformation from the parent phase (gamma) to the secondary phase (alpha) and evolution of micro-damage. The constitutive model presented in the paper is focused on the discontinuous plastic flow (serrated yielding) and takes into account the relevant thermodynamic background. The discontinuous plastic flow reflecting the DSA effect is described by the mechanism of local catastrophic failure of Lomer-Cottrell (LC) locks under the stress fields related to the accumulating edge dislocations (below the transition temperature from the screw dislocations to the edge dislocations mode T-1). The failure of LC locks leads to mass...

  9. Bioassessment of the Effluents Discharged from Two Export Oriented Industrial Zones Located in Kelani River Basin, Sri Lanka Using Erythrocytic Responses of the Fish, Nile Tilapia (Oreochromis niloticus).

    Hemachandra, C K; Pathiratne, A

    2017-10-01

    Complex effluents originating from diverse industrial processes in industrial zones could pose cytotoxic/genotoxic hazards to biota in the receiving ecosystems which cannot be revealed by conventional monitoring methods. This study assessed potential cytotoxicity/genotoxicity of treated effluents of two industrial zones which are discharged into Kelani river, Sri Lanka combining erythrocytic abnormality tests and comet assay of the tropical model fish, Nile tilapia. Exposure of fish to the effluents induced erythrocytic DNA damage and deformed erythrocytes with serrated membranes, vacuolations, nuclear buds and micronuclei showing cytotoxic/genotoxic hazards in all cases. Occasional exceedance of industrial effluent discharge regulatory limits was noted for color and lead which may have contributed to the observed cytotoxicity/genotoxicity of effluents. The results demonstrate that fish erythrocytic responses could be used as effective bioanalytical tools for cytotoxic/genotoxic hazard assessments of complex effluents of industrial zones for optimization of the waste treatment process in order to reduce biological impacts.

  10. Pharmacognostical study and phytochemical evaluation of brown seaweed Sargassum wightii

    Jeyaraman Amutha Iswarya Devi

    2013-10-01

    Full Text Available Objective: To explore the pharmacognostical and phytochemical properties of Sargassum wightii. Methods: The qualitative microscopy, phytochemical screening, physicochemical evaluation and fluorescence analysis of the plant were carried out according to the standard procedure recommended in the WHO guidelines. Results: Macroscopic study showed that plants were dark brown, 20-30 cm in height, leaves were 5-8 cm length, shape: linear to ovate, apex: midrib in conspicuous and having the entire, serrate margin. Microscopic evaluation of the transverse section of the leaf, stem, air bladder, receptacles showed the presence of epidermis layer followed by thick cuticle, conducting strand, mesophyll and possessed antheridia or oogonia at the swollen terminal portions. The different extracts of Sargassum wightii showed the presence of steroids, alkaloids, phenolic compounds, saponins and flavonoids with varied degree. Conclusions: Various pharmacognostical parameters evaluated in this study help in the identification and standardization of the of the seaweed Sargassum wightii

  11. Reliability enumeration model for the gear in a multi-functional machine

    Nasution, M. K. M.; Ambarita, H.

    2018-02-01

    The angle and direction of motion play an important role in the ability of a multifunctional machine to be able to perform the task to be charged. The movement can be a rotational action that appears to perform a round, by which the rotation can be done by connecting the generator by hand through the help of a hinge formed from two rounded surfaces. The rotation of the entire arm can be carried out by the interconnection between two surfaces having a jagged ring. This link will change according to the angle of motion, and any yeast of the serration will have a share in the success of this process, therefore a robust hand measurement model is established based on canonical provisions.

  12. Review of Marmasoma White with lectotype designation of M. sumptuosum White and an identification key to the Australasian/Oceanian genera of Ecliminae (Diptera, Bombyliidae).

    Rodrigues, Paula Fernanda Motta; McAlister, Erica; Lamas, Carlos José Einicker

    2017-02-15

    The bombyliid genus Marmasoma White is restricted to Australia. Marmasoma sumptuosum White, the only known species of the genus, is studied and a lectotype and paralectotypes are designated. Based on the type series and on additional material, a redescription of the species is presented and the main characters of the external morphology of adults are illustrated and photographed, including male and female genitalia. In addition, the remarkable aedeagus of M. sumptuosum, unique among all Ecliminae species by the presence of serrated projections on its apical portion, is described and photographed in detail for the first time. An identification key to the Australasian/Oceanian genera of Ecliminae and a distribution map with the known geographic records of Marmasoma are also included.

  13. Multifocal Colonic Lesions Detected by 18F-FDG PET/CT: Correlation with Histopathology and Gross Specimen

    Choi, Byung Wook; Kim, Sung Hoon; Kim, Hae Won; Won, Kyoung Sook; Zeon, Seok Kil

    2010-01-01

    A fluorodeoxyglucose (FDG) positron emission tomography (PET)-computer tomography (CT) scan for staging. No definite abnormal FDG uptake of the stomach was shown. Incidentally, variable FDG uptake at the bilateral serrates muscles, abdominal muscles and muscles of both thighs (Fig. 1) was observed. He had no significant past medical history except recently diagnosed stomach cancer. On personal interview, he described having had sexual activity the night before the F-18 FDG PET/CT scan, although he was aware of needing to avoid physical activity before a PET scan. The F-18 FDG PET/CT scan was done at 2:00 p.m. Therefore, the hypermetabolism of individual skeletal muscles following sexual activity lasted over 12 h. This case illustrates the hypermetabolism of skeletal muscles following sexual activity as a normal variation.

  14. Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses

    Jiang, W.H.; Liu, F.X.; Wang, Y.D.; Zhang, H.F.; Choo, H.; Liaw, P.K.

    2006-01-01

    As-cast bulk and as-spun ribbon Cu 60 Zr 30 Ti 10 metallic glasses were characterized using differential-scanning calorimetry and instrumented nanoindentation. Two alloys show a significant difference in the amount of free volume, which is attributed to the difference in a cooling rate, while exhibiting a similar serrated plastic flow. Atomic-force-microscopy observations demonstrate the pile-ups containing shear bands around the indents in both alloys. The as-cast bulk alloy has higher hardness and elastic modulus than the as-spun ribbon alloy. The difference in the strengths of two alloys may be related to the different amount of free volume. The strength seems to be more sensitive to a cooling rate during solidification than the plastic-flow behavior in the Cu 60 Zr 30 Ti 10

  15. Atomistic characterization of pseudoelasticity and shape memory in NiTi nanopillars

    Zhong Yuan; Gall, Ken; Zhu Ting

    2012-01-01

    Molecular dynamics simulations are performed to study the atomistic mechanisms governing the pseudoelasticity and shape memory in nickel–titanium (NiTi) nanostructures. For a 〈1 1 0〉 – oriented nanopillar subjected to compressive loading–unloading, we observe either a pseudoelastic or shape memory response, depending on the applied strain and temperature that control the reversibility of phase transformation and deformation twinning. We show that irreversible twinning arises owing to the dislocation pinning of twin boundaries, while hierarchically twinned microstructures facilitate the reversible twinning. The nanoscale size effects are manifested as the load serration, stress plateau and large hysteresis loop in stress–strain curves that result from the high stresses required to drive the nucleation-controlled phase transformation and deformation twinning in nanosized volumes. Our results underscore the importance of atomistically resolved modeling for understanding the phase and deformation reversibilities that dictate the pseudoelasticity and shape memory behavior in nanostructured shape memory alloys.

  16. Delivering the lateral inhibition punchline: it's all about the timing.

    Axelrod, Jeffrey D

    2010-10-26

    Experimental and theoretical biologists have long been fascinated with the emergence of self-organizing patterns in developing organisms, and much attention has focused on Notch-mediated lateral inhibition. Within sheets of cells that may adopt either of two possible cell fates, lateral inhibition establishes patterns through the activity of a negative intercellular feedback loop involving the receptor, Notch, and its ligands Delta or Serrate. Despite a long history of intensive study in Drosophila, where the mechanism was first described, as well as in other organisms, new work continues to yield important insights. Mathematical modeling, combined with biological analyses, has now shed light on two features of the process: how antagonistic and activating ligand-receptor interactions work together to accelerate inhibition and ensure fidelity, and how filopodial dynamics contribute to the observed pattern refinement and spacing.

  17. Submucosal chromoendoscopy: a technique that highlights epithelia and differentiates histological components, and renders colon polypectomy easier and safer

    Carlos Dolz-Abadía

    2015-07-01

    Full Text Available Submucosal chromoendoscopy involves the injection of a solution containing a vital stain, usually indigo carmine, into the intestinal wall submucosal layer. This allows to: Better delimit and characterize the various epithelia present (colonic mucosa, adenoma, hyperplastic polyp, serrated polyp, small bowel mucosa; expose and delimit lesion implantation areas; cooperate in the lifting of resectable lesions; ensure section across the submucosal plane; identify intestinal wall structures; render complex polypectomy feasible; and facilitate the identification of perforations. The present paper offers information on the endoscopic technique for submucosal injection, solution preparation and concentration, and on the potential benefits it may provide for polypectomy or endocopic mucosal resection whether en block or piecemeal. This endoscopic technique simultaneously combines a diagnostic and a therapeutic aspect, since lesion lifting in association with better delimited contours may improve not only accuracy but also endoscopic resection safety and feasibility.

  18. Relationship between radiation effect for carcinoma of the esophagus and x-ray findings before and after radiotherapy

    Morita, Kozo; Obata, Yasunori; Watanabe, Michiko; Karasawa, Kazuo; Takagi, Iwao

    1980-01-01

    From 1970 through 1978, 95 patients with carcinoma of the esophagus were treated with irradiation alone and/or combined with the administration of Bleomycin, preoperatively. On the basis of the histological analysis of the surgical specimen, the relationship between radiation effect for the primary tumor and the x-ray findings before and after the radiotherapy was investigated. The radiotherapy was the most effective for the superficial and tumorous type on the x-ray findings before treatment. The tumorous protruded subtype in the serrated type was more radiosensitive than the ulcerative subtype. The same tendency was also observed in the spiral type. The narrowing of the esophagus (funnelled type) and the ulceration were the most unsuitable signs for the radiotherapy. (author)

  19. Planning of radiation therapy for esophageal cancer

    Iwata, Takeo

    1981-01-01

    The esophageal malignant tumors occur mostly at the pulmonary esophagus, whereas such tumors also occur at the cervical and abdominal esophagus. Moreover, histologically, such malignant tumors are mostly carcinoma planocellulare and yet, there are not a few cases of adenomatous carcinoma and indifferentiated carcinoma. X-ray pictures reveal various types, such as infundibular, spiral and serrated forms, which are related to the radioactive therapuetic effects. However, the most difficult condition in radioactive therapies for the esophagus is that this organ is adjacent to important viscera at the surroundings, thus the most irradiating field covers the normal tissues. For such radiating sites, instead of the conventional simple radiation by 2 guns, a further progress was considered by trying to pursue more efficient and effective methods for radiating therapies in classfication by the generating or causing sites of carcinoma, in application of computers. (author)

  20. A new species of Rullierinereis and new records of Nereididae from sublittoral sandy bottoms off Lanzarote (Canary Islands

    Jorge Núñez

    2006-12-01

    Full Text Available Rullierinereis ancornunezi n. sp., collected from sandy and maërl bottoms from 19-55 m depth around Lanzarote island, is described. The new taxon is characterized by having a reduced or absent upper notopodial ligule in biramous parapodia of chaetigers 3-9 and in the middle region from chaetiger 26 onwards, and also by the shape of the homogomph notopodial falciger blade, which is short and serrated. A comparison with morphologically similar species is made. Other nereidid species collected were: Nereis lamellosa Ehlers, 1864, Nereis rava Ehlers, 1864, Neanthes caudata (Delle Chiaje, 1827 and Neanthes rubicunda (Ehlers, 1864. A map of the distribution of these species is presented.

  1. In Situ SEM Observations of Fracture Behavior of Laser Welded-Brazed Al/Steel Dissimilar Joint

    Xia, Hongbo; Tan, Caiwang; Li, Liqun; Ma, Ninshu

    2018-03-01

    Laser welding-brazing of 6061-T6 aluminum alloy to DP590 dual-phase steel with Al-Si12 flux-cored filler wire was performed. The microstructure at the brazing interface was characterized. Fracture behavior was observed and analyzed by in situ scanning electron microscope. The microstructure of the brazing interface showed that inhomogeneous intermetallic compounds formed along the thickness direction, which had a great influence on the crack initiation and propagation. In the top region, the reaction layer at the interface consisted of scattered needle-like Fe(Al,Si)3 and serration-shaped Fe1.8Al7.2Si. In the middle region, the compound at the interface was only serration-shaped Fe1.8Al7.2Si. In the bottom region, the interface was composed of lamellar-shaped Fe1.8Al7.2Si. The cracks were first detected in the bottom region and propagated from bottom to top along the interface. At the bottom region, the crack initiated and propagated along the Fe1.8Al7.2Si/weld seam interface during the in situ tensile test. When the crack propagated into the middle region, a deflection of crack propagation appeared. The crack first propagated along the steel/Fe1.8Al7.2Si interface and then moved along the weld seam until the failure of the joint. The tensile strength of the joint was 146.5 MPa. Some micro-cracks were detected at Fe(Al,Si)3 and the interface between the steel substrate and Fe(Al,Si)3 in the top region while the interface was still connected.

  2. Findings in young adults at colonoscopy from a hospital service database audit.

    Wong, Stephanie; Lidums, Ilmars; Rosty, Christophe; Ruszkiewicz, Andrew; Parry, Susan; Win, Aung Ko; Tomita, Yoko; Vatandoust, Sina; Townsend, Amanda; Patel, Dainik; Hardingham, Jennifer E; Roder, David; Smith, Eric; Drew, Paul; Marker, Julie; Uylaki, Wendy; Hewett, Peter; Worthley, Daniel L; Symonds, Erin; Young, Graeme P; Price, Timothy J; Young, Joanne P

    2017-04-19

    Colorectal cancer (CRC) diagnosed at young adults. The aim of this work was to document the prevalence and histological subtype of lesions seen in patients aged <50 years, and any associated clinical features. An audit of the colonoscopy database at The Queen Elizabeth Hospital in Adelaide, South Australia over a 12-month period was undertaken. Findings were recorded from both colonoscopy reports and corresponding histological examination of excised lesions. Data were extracted from colonoscopies in 2064 patients. Those aged <50 comprised 485 (24%) of the total. CRC precursor lesions (including sessile serrated adenoma/polyps (SSA/P), traditional serrated adenomas, tubular adenomas ≥10 mm or with high-grade dysplasia, and conventional adenomas with villous histology) were seen in 4.3% of patients aged <50 and 12.9% of patients aged ≥50 (P <0.001). Among colonoscopies yielding CRC precursor lesions in patients under 50 years, SSA/P occurred in 52% of procedures (11/21), compared with 27% (55/204) of procedures in patients aged 50 and older (P = 0.02). SSA/P were proximally located in (10/11) 90% of patients aged under 50, and 80% (43/54) of those aged 50 and older (P = 0.46). SSA/P were the most frequently observed CRC precursor lesions in patients aged <50. Most CRCs in this age group are known to arise in the distal colon and rectum suggesting that lesions other than SSA/P may serve as the precursor for the majority of early-onset CRC.

  3. Implementation of an optical diagnosis strategy saves costs and does not impair clinical outcomes of a fecal immunochemical test-based colorectal cancer screening program.

    Vleugels, Jasper L A; Greuter, Marjolein J E; Hazewinkel, Yark; Coupé, Veerle M H; Dekker, Evelien

    2017-12-01

     In an optical diagnosis strategy, diminutive polyps that are endoscopically characterized with high confidence are removed without histopathological analysis and distal hyperplastic polyps are left in situ. We evaluated the effectiveness and costs of optical diagnosis.  Using the Adenoma and Serrated pathway to Colorectal CAncer (ASCCA) model, we simulated biennial fecal immunochemical test (FIT) screening in individuals aged 55 - 75 years. In this program, we compared an optical diagnosis strategy with current histopathology assessment of all diminutive polyps. Base-case assumptions included 76 % high-confidence predictions and sensitivities of 88 %, 91 %, and 88 % for endoscopically characterizing adenomas, sessile serrated polyps, and hyperplastic polyps, respectively. Outcomes were colorectal cancer burden, number of colonoscopies, life-years, and costs.  Both the histopathology strategy and the optical diagnosis strategy resulted in 21 life-days gained per simulated individual compared with no screening. For optical diagnosis, €6 per individual was saved compared with the current histopathology strategy. These cost savings were related to a 31 % reduction in colonoscopies in which histopathology was needed for diminutive polyps. Projecting these results onto the Netherlands (17 million inhabitants), assuming a fully implemented FIT-based screening program, resulted in an annual undiscounted cost saving of € 1.7 - 2.2 million for optical diagnosis.  Implementation of optical diagnosis in a FIT-based screening program saves costs without decreasing program effectiveness when compared with current histopathology analysis of all diminutive polyps. Further work is required to evaluate how endoscopists participating in a screening program should be trained, audited, and monitored to achieve adequate competence in optical diagnosis.

  4. Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel

    Chakraborty, Arnab; Adhikary, Manashi; Venugopalan, T.; Singh, Virender; Nanda, Tarun; Kumar, B. Ravi

    2016-01-01

    The effect of martensite spatial distribution and its interface morphology on the bake hardening characteristics of a dual phase steel was investigated. In one case, typical industrial continuous annealing line parameters were employed to anneal a 67% cold rolled steel to obtain a dual phase microstructure. In the other case, a modified annealing process with changed initial heating rates and peak annealing temperature was employed. The processed specimens were further tensile pre-strained within 1–5% strain range followed by a bake hardening treatment at 170 °C for 20 min. It was observed that industrial continuous annealing line processed specimen showed a peak of about 70 MPa in bake-hardening index at 2% pre-strain level. At higher pre-strain values a gradual drop in bake-hardening index was observed. On the contrary, modified annealing process showed near uniform bake-hardening response at all pre-strain levels and a decrease could be noted only above 4% pre-strain. The evolving microstructure at each stage of annealing process and after bake-hardening treatment was studied using field emission scanning electron microscope. The microstructure analysis distinctly revealed differences in martensite spatial distribution and interface morphologies between each annealing processes employed. The modified process showed predominant formation of martensite within the ferrite grains with serrated lath martensite interfaces. This nature of the martensite was considered responsible for the observed improvement in the bake-hardening response. Furthermore, along with improved bake-hardening response negligible loss in tensile ductility was also noted. This behaviour was correlated with delayed micro-crack initiation at martensite interface due to serrated nature.

  5. The Catalan nova cançó: origin, evolution and significance of a cultural phenomenon of the second part of the Franco regime | La nova cançó catalana: génesis, desarrollo y trascendencia de un fenómeno cultural en el segundo franquismo

    Carlos Aragüez Rubio

    2006-12-01

    Full Text Available This article seeks to explain the cultural phenomenon of the Catalan nova cançó, as well as its importance in the cultural scene of the 1960s and early 1970s. To this end, we focus our attention on its origin, the factors which gave rise to it, and how it later became such an influential movement in the world of Spanish music, creating a new model of singer-songwriter which would spread throughout the country. Furthermore, we examine the political significance that the cançó would acquire after 1968, as a result of Joan Manuel Serrat's refusal to sing in Spanish in the Eurovision Song Contest, which in turn would highlight the continuation of the regime's censorship of Catalan songs. Lastly, this paper explores the role of this movement in promoting cultural change in Spain during the 1960s and 1970s. | El presente artículo trata de explicar en qué consiste el fenómeno cultural de la nova cançó catalana, así como su importancia en el panorama cultural de los años sesenta y primeros setenta. Para ello nos centramos en su nacimiento, las causas que lo motivan y su posterior desarrollo como movimiento influyente en la canción española, generando un nuevo modelo de cantautor que se extenderá por todo el país. Además se analiza el significado político que la cançó va a adquirir desde 1968, debido a la negativa de Joan Manuel Serrat de cantar en castellano en Eurovisión, algo que pondrá de manifiesto el seguimiento de la actividad de la censura ante las canciones catalanas. Por último, el texto reflexiona sobre el papel del movimiento en el cambio cultural de la España del momento.

  6. Mechanical properties and microstructure of commercial amorphous golf club heads made of Zr-Ti-Cu-Ni-Be bulk metallic glass

    Choi, Y.C.; Hong, S.I.

    2007-01-01

    Mechanical properties and microstructures of Zr 41.2 Ti 13.8 Cu 12.5 Ni 10 Be 22.5 (numbers indicate at.%) bulk metallic glass taken from commercial golf club heads were investigated at room temperature and 573 K. Transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) indicate that the thin central section of the golf club head is amorphous and the outer rim of the head is crystallized. X-ray diffraction (XRD) analyses revealed the presence of Zr 2 Cu, ZrBe 2 , Cu 2 Ni and BeNi in the rim of the iron head. In the crystallized region, crystalline particles with the size of ∼1 μm were observed. At room temperature, amorphous sample (∼2100 MPa) revealed higher fracture stress than crystallized sample (∼1700 MPa). Crystallized sample fractured in the elastic region whereas the amorphous sample displayed some plasticity corresponding serrated flow before the fracture. The serrated flow region with some plasticity in the amorphous alloy results from strain hardening and repetitive shear band initiation and propagation. The crystallized alloy extracted from the thick part of the club fractured in the elastic region, at a much lower stress level than the amorphous, suggesting that relatively coarse crystal particles formed during cooling cause the brittle fracture. Scanning electron microscope observations revealed that the compressive fracture surface of the samples from the central thin section mainly consisted of vein-like structure, but the samples from the outer rim of the head showed mixture of vein-like structure and featureless brittle fracture morphology. At 573 K, both samples exhibited the decrease of strength and fractured in the elastic region. In this study, the effect of crystallization on the reliability and safety of golf club heads was also examined

  7. Unmetabolized Folic Acid, Tetrahydrofolate, and Colorectal Adenoma Risk.

    Rees, Judy R; Morris, Carolyn B; Peacock, Janet L; Ueland, Per M; Barry, Elizabeth L; McKeown-Eyssen, Gail E; Figueiredo, Jane C; Snover, Dale C; Baron, John A

    2017-08-01

    In a randomized trial of folic acid supplementation for the prevention of colorectal adenomas, we previously found indications of increased risk during later treatment and follow-up. This could have been due to the unmetabolized folic acid (UFA) or natural reduced and methylated folates (mF) to which it is metabolized. In post hoc analyses, we measured mF (the sum of 5-methyl-tetrahydrofolate and 4-alfa-hydroxy-5-methyl-THF) and UFA concentrations in the serum of 924 participants. Using binomial regression models with a log link, we assessed the associations between plasma mF or UFA and adenoma occurrence. We found no association between plasma mF or UFA and overall adenoma risk. However, during later follow-up, the prespecified, composite endpoint of high-risk findings (advanced or multiple adenomas) was positively associated with plasma mF ( P linear trend = 0.009), with a 58% increased risk for participants in the upper versus lowest quartile. An irregular association was seen with plasma UFA, with suggestions of an inverse trend ( P linear trend =0.049). A modest, significant inverse association was also seen between mF and risk of serrated lesions, with a 39% lower risk for upper versus lower quartile participants ( P linear trend = 0.03). In conclusion, during the later follow-up period in which folic acid supplementation was previously seen to increase the risk of advanced and multiple adenomas, higher serum mF was associated with a higher risk of multiple and/or advanced adenomas, but no clear indication that UFA played a direct role. There were indications that higher mF was associated with reduced risk of serrated polyps. Cancer Prev Res; 10(8); 451-8. ©2017 AACR . ©2017 American Association for Cancer Research.

  8. Evaluation of a clinical risk index for advanced colorectal neoplasia among a North American population of screening age.

    Ruco, Arlinda; Stock, David; Hilsden, Robert J; McGregor, S Elizabeth; Paszat, Lawrence F; Saskin, Refik; Rabeneck, Linda

    2015-11-19

    A clinical risk index employing age, sex, family history of colorectal cancer (CRC), smoking history and body mass index (BMI) may be useful for prioritizing screening with colonoscopy. The aim of this study was to conduct an external evaluation of a previously published risk index for advanced neoplasia (AN) in a large, well-characterized cohort. Five thousand one hundred thirty-seven asymptomatic persons aged 50 to 74 (54.9 % women) with a mean age (SD) of 58.3 (6.2) years were recruited for the study from a teaching hospital and colorectal cancer screening centre between 2003 and 2011. All participants underwent a complete screening colonoscopy and removal of all polyps. AN was defined as cancer or a tubular adenoma, traditional serrated adenoma (TSA), or sessile serrated adenoma (SSA) with villous characteristics (≥25% villous component), and/or high-grade dysplasia and/or diameter ≥10 mm. Risk scores for each participant were summed to derive an overall score (0-8). The c-statistic was used to measure discriminating ability of the risk index. The prevalence of AN in the study cohort was 6.8 %. The likelihood of detecting AN increased from 3.6 to 13.1 % for those with a risk score of 1 to 6 respectively. The c-statistic for the multivariable logistic model in our cohort was 0.64 (95 % CI = 0.61-067) indicating modest overlap between risk scores. The risk index for AN using age, sex, family history, smoking history and BMI was found to be of limited discriminating ability upon external validation. The index requires further refinement to better predict AN in average risk persons of screening age.

  9. Detection of aeroacoustic sound sources on aircraft and wind turbines

    Oerlemans, S.

    2009-01-01

    This thesis deals with the detection of aeroacoustic sound sources on aircraft and wind turbines using phased microphone arrays. First, the reliability of the array technique is assessed using airframe noise measurements in open and closed wind tunnels. It is demonstrated that quantitative acoustic measurements are possible in both wind tunnels. Then, the array technique is applied to characterize the noise sources on two modern large wind turbines. It is shown that practically all noise emitted to the ground is produced by the outer part of the blades during their downward movement. This asymmetric source pattern, which causes the typical swishing noise during the passage of the blades, can be explained by trailing edge noise directivity and convective amplification. Next, a semi-empirical prediction method is developed for the noise from large wind turbines. The prediction code is successfully validated against the experimental results, not only with regard to sound levels, spectra, and directivity, but also with regard to the noise source distribution in the rotor plane and the temporal variation in sound level (swish). The validated prediction method is then applied to calculate wind turbine noise footprints, which show that large swish amplitudes can occur even at large distance. The influence of airfoil shape on blade noise is investigated through acoustic wind tunnel tests on a series of wind turbine airfoils. Measurements are carried out at various wind speeds and angles of attack, with and without upstream turbulence and boundary layer tripping. The speed dependence, directivity, and tonal behaviour are determined for both trailing edge noise and inflow turbulence noise. Finally, two noise reduction concepts are tested on a large wind turbine: acoustically optimized airfoils and trailing edge serrations. Both blade modifications yield a significant trailing edge noise reduction at low frequencies, but also cause increased tip noise at high frequencies

  10. Setal morphology of the grooming appendages of Macrobrachium rosenbergii (Crustacea: Decapoda: Caridea: Palaemonidae) and review of decapod setal classification.

    Wortham, Jennifer L; Vanmaurik, Lauren N; Wayne Price, W

    2014-06-01

    Setae are vital in grooming activities and aiding in the removal of epibionts and sedimentary fouling from the body surfaces of decapod crustaceans. Thus, the setal structures and their arrangement on the grooming appendages and sensory structures of the commercially important shrimp, Macrobrachium rosenbergii, were examined using scanning electron microscopy. Macrobrachium rosenbergii is extensively grown in aquaculture and exhibits unique male morphological forms, termed morphotypes. The three male morphotypes are termed blue-clawed males, orange-clawed males, and small-clawed or undifferentiated males and all three differ in their dominance, behavior, body morphology, and reproductive success. Seven setal types, two of which have never been described in the literature, are identified on the grooming appendages (third maxillipeds, first, second, and fifth pereopods) and antennae: simple, serrate, serrulate, spiniform, pappose, crinoid, and spinulate. The latter two setae are newly identified. Certain setal types, such as serrate and serrulate setae were located and associated with specific grooming appendages such as the first pereopods. The types of setae on the grooming appendages varied among females and male morphotypes and the novel setal types (crinoid and spinulate) were found only on two of the male morphotypes. A literature review of terminology related to the structure of setae and setal types in decapod crustaceans is offered as the usage of various terms is ambiguous and conflicting in the literature. The intention of this review is to provide future authors with a comprehensive collection of terms and images that can be used to describe various aspects of setal morphology in decapods. Copyright © 2014 Wiley Periodicals, Inc.

  11. Evidence that grey seals (Halichoerus grypus use above-water vision to locate baited buoys

    Arne Fjälling

    2007-01-01

    Full Text Available Fishing gear in the Baltic is often raided by grey seals (Halichoerus grypus. The seals remove the fish and damage the nets, or entangle themselves and drown. In order to develop ways of mitigating the seals-fisheries conflict, it is important to know exactly how the seals locate the fishing gear. A field experiment was conducted in order to clarify whether seals use their vision above water to do this. Bait (herring; Clupea harengus was attached to the anchor lines of buoys of the type that is commonly used to mark the position of fishing gear. In all, 643 buoys were set. Some of the buoys (210 were also fitted with camera traps. Weather data were collected from official weather stations nearby. Bait loss (mean 18% was significantly correlated with buoy size (P = 0.002 and wind speed (P = 0.04. There was a significant association between bait loss and seal observations near the buoys (P = 0.05. Five photos of grey seals were obtained from the camera traps. No fish-eating birds, such as cormorants or mergansers, were ever observed near the buoys or caught on camera. It was concluded that a main cause of missing bait was scavenging by grey seals, and that they did use above-water vision to locate the buoys. It was also concluded that wind strength (i.e. wave action contributed tothe bait loss. The camera trap buoys had a somewhat lower bait loss than the other buoys (P = 0.054, which was attributed to a scaring effect. Neither the number of seal observations nor the bait loss differed significantly between the 2 study areas in the experiment (P = 0.43 and P = 0.83, respectively. Bait loss was not affected by the buoy colour (red, white, or grey; P = 0.87. We suggest that the findings of this experiment could be put into practice in a seal-disturbed area by deploying a number of decoy buoys, or by hiding live buoys below the surface of the water. This would increase the cost of foraging for the seals, and hence discourage them from exploiting

  12. Elevated temperature mechanical properties of line pipe steels

    Jacobs, Taylor Roth

    The effects of test temperature on the tensile properties of four line pipe steels were evaluated. The four materials include a ferrite-pearlite line pipe steel with a yield strength specification of 359 MPa (52 ksi) and three 485 MPa (70 ksi) yield strength acicular ferrite line pipe steels. Deformation behavior, ductility, strength, strain hardening rate, strain rate sensitivity, and fracture behavior were characterized at room temperature and in the temperature range of 200--350 °C, the potential operating range for steels used in oil production by the steam assisted gravity drainage process. Elevated temperature tensile testing was conducted on commercially produced as-received plates at engineering strain rates of 1.67 x 10 -4, 8.33 x 10-4, and 1.67 x 10-3 s-1. The acicular ferrite (X70) line pipe steels were also tested at elevated temperatures after aging at 200, 275, and 350 °C for 100 h under a tensile load of 419 MPa. The presence of serrated yielding depended on temperature and strain rate, and the upper bound of the temperature range where serrated yielding was observed was independent of microstructure between the ferrite-pearlite (X52) steel and the X70 steels. Serrated yielding was observed at intermediate temperatures and continuous plastic deformation was observed at room temperature and high temperatures. All steels exhibited a minimum in ductility as a function of temperature at testing conditions where serrated yielding was observed. At the higher temperatures (>275 °C) the X52 steel exhibited an increase in ductility with an increase in temperature and the X70 steels exhibited a maximum in ductility as a function of temperature. All steels exhibited a maximum in flow strength and average strain hardening rate as a function of temperature. The X52 steel exhibited maxima in flow strength and average strain hardening rate at lower temperatures than observed for the X70 steels. For all steels, the temperature where the maximum in both flow

  13. ROLE OF DISCRETE NATURE OF CHIP FORMATION AND NATURAL VIBRATIONS OF SYSTEM COMPONENTS IN CHATTER FORMATION DURING METAL CUTTING

    A. K. M. Nurulamin

    2010-05-01

    Full Text Available In the present work a review of the existing theories of chatter formation has been conducted and the weaknesses of the most widely accepted ‘Regenerative Chatter theory’ in explaining various phenomena related to chatter formation have been identified. An attempt has been made in this work to determine the common causes of chatter formation in different metal cutting operations, namely, turning, thread cutting and end milling conducted on plain carbon steel AISI 1040. Experimental investigations have been conducted during the above types of machining processes to identify the marks of instability and chatter on the formed chips. It has been identified that in all the three machining operations the chips formed show a common type of discreteness in the form of secondary saw teeth, which appear at the free edge of the chip. Mechanism of formation of these teeth has been studied and the frequencies of their formation have been determined for different cutting conditions. Apart from the secondary saw teeth primary saw teeth have also been identified at the main section of the chip and their frequencies were also determined. At the same time the natural vibrations of the main system components have been identified and the acceleration amplitudes at the prominent natural frequencies during actual machining were recoded using a dedicated vibration monitoring system. The frequencies of secondary chip serration and the natural frequencies of the system components were plotted against cutting speed. Acceleration amplitudes at the prominent natural frequencies were also plotted separately against cutting force. Based on comparison and analysis of these two frequency and amplitude graphs it was concluded that chatter (vibration with relatively high amplitude appears in the system when the frequency of secondary saw teeth approaches values equal to half or integer multiple of a prominent natural frequency of the system resulting in resonance. In the

  14. Larval, pre-juvenile and juvenile development of Diapterus peruvianus (Perciformes: Gerreidae

    Sylvia Patricia Adelheid Jiménez Rosenberg

    2003-06-01

    Full Text Available The development of Diapterus peruvianus (Sauvage 1879 is based on 60 larvae collected in superficial tows made in Bahía Concepción, and on 16 prejuvenile and juvenile organisms collected in Bahía de La Paz, B. C. S., México, using a standard plankton net and a rectangular epibenthonic net, respectively. Larvae of D. peruvianus show three large blotches on the dorsum of the gut that can fuse together and give the appearance of one large continuous blotch. There are two to three pre-anal pigments and 16 post-anal pigments in the ventral midline; cephalic pigments are present from the postflexion stage, as well as a serrated preoperculum. The prejuvenile and juvenile organisms are distinguished by their body depth, the analfin formula, the serrated preoperculum and the base pigments in the dorsal and anal fins.El desarrollo de Diapterus peruvianus se analizó con base en 60 larvas recolectadas en Bahía Concepción y 16 pre-juveniles y juveniles recolectados en la Ensenada de La Paz, B. C. S. México, usando respectivamente, una red estándar de plancton en arrastres superficiales y una red epibentónica para arrastres de plancton. Las larvas presentan desde la pre-flexión tres manchas alargadas sobre la superficie dorsal de la masa visceral, que pueden unirse y dar apariencia de pigmentación continua, observándose hasta 16 pigmentos post-anales en la línea media ventral y de dos a tres pigmentos pre-anales; la pigmentación cefálica así como la forma aserrada del pre-opérculo característica del género, aparecen a partir de la post-flexión. Los organismos pre-juveniles y juveniles se distinguen por la profundidad del cuerpo, la fórmula de la aleta anal, la fina forma aserrada del pre-opérculo y la pigmentación en la base de las aletas dorsal y anal.

  15. Effect of temperature and aluminium additions on the mechanical properties of the 13% chromium ferrite stainless steels

    Martins, S.

    1975-01-01

    The potential interest of the ferritic stainless steels as component materials for nuclear power reactors led to investigate how aluminium influences the mechanical properties of 13% chromium ferritic stainless steels between room temperature and about 700 0 C. Nominal 13% chromium and 0.04 to 0.08% carbon ferritic stainless steels containing 0, 0.13, 2.19 and 4.15% aluminium, respectively, were obtained by vacuum remelting of a commercial martensitic-ferritic stainless steel and suitable additions of aluminium. After successive rolling operations and recrystallizations performed in order to obtain final 0.5 mm thick sheets with similar average grain sizes the specimens of the above mentioned steels were tested in a tensile test Instron machine, with a constant strain rate (approximately equal to 1.6 x 10 -3 min -1 ), at room temperature, 140, 265, 415, 565 and 715 0 C. The results obtained show that strengthening by aluminium is strongly temperature dependent. At 265 0 C all the steels presentes serrated plastic deformation (Portevin-Le Chatelier effect), which is attributed to interactions of the interstitial and substitutional solute atoms with dislocations in the body centered cubic structure. Flow stress drops were still observed at 465 0 C, although the tests performed at 565 and 715 0 C showed work-softening of the materials and total absence of serrations. Stress relaxation tests at room temperature yielded values of the apparent activation volumes, which are scattered between about 100 and 130 b 3 (b-Burgers vector), being almost constant with stress, strain and aluminium content. Therefore, although aluminium appreciably strengthens the 13% chromium steel, the behaviour summarized suggests that the mechanism controlling plastic deformation at room temperature is the same for all the tested steels, the values of the apparent activitation volumes being probably determined by the interstitial content. Stress relaxation tests at 20, 75, 140 and 265 0 C for

  16. Hypoxia-inducible factor 1 alpha expression increases during colorectal carcinogenesis and tumor progression

    Simiantonaki, Nektaria; Taxeidis, Marios; Jayasinghe, Caren; Kurzik-Dumke, Ursula; Kirkpatrick, Charles James

    2008-01-01

    Hypoxia-inducible factor 1 alpha (HIF-1α) is involved in processes promoting carcinogenesis of many tumors. However, its role in the development of colorectal cancer is unknown. To investigate the significance of HIF-1α during colorectal carcinogenesis and progression we examined its expression in precursor lesions constituting the conventional and serrated pathways, as well as in non-metastatic and metastatic adenocarcinomas. Immunohistochemistry and Western blot is used to analyse HIF-1α expression in normal colonic mucosa, hyperplastic polyps (HPP), sessile serrated adenomas (SSA), low-grade (TA-LGD) and high-grade (TA-HGD) traditional adenomas as well as in non-metastatic and metastatic colorectal adenocarcinomas. Eight colorectal carcinoma cell lines are tested for their HIF-1α inducibility after lipopolysaccharide (LPS) stimulation using western blot and immunocytochemistry. In normal mucosa, HPP and TA-LGD HIF-1α was not expressed. In contast, perinuclear protein accumulation and nuclear expression of HIF-1α were shown in half of the examined SSA and TA-HGD. In all investigated colorectal carcinomas a significant nuclear HIF-1α overexpression compared to the premalignant lesions was observed but a significant correlation with the metastatic status was not found. Nuclear HIF-1α expression was strongly accumulated in perinecrotic regions. In these cases HIF-1α activation was seen in viable cohesive tumor epithelia surrounding necrosis and in dissociated tumor cells, which subsequently die. Enhanced distribution of HIF-1α was also seen in periiflammatory regions. In additional in vitro studies, treatment of diverse colorectal carcinoma cell lines with the potent pro-inflammatory factor lipopolysaccharide (LPS) led to HIF-1α expression and nuclear translocation. We conclude that HIF-1α expression occurs in early stages of colorectal carcinogenesis and achieves a maximum in the invasive stage independent of the metastatic status. Perinecrotic

  17. Distinct clinical outcomes of two CIMP-positive colorectal cancer subtypes based on a revised CIMP classification system.

    Bae, Jeong Mo; Kim, Jung Ho; Kwak, Yoonjin; Lee, Dae-Won; Cha, Yongjun; Wen, Xianyu; Lee, Tae Hun; Cho, Nam-Yun; Jeong, Seung-Yong; Park, Kyu Joo; Han, Sae Won; Lee, Hye Seung; Kim, Tae-You; Kang, Gyeong Hoon

    2017-04-11

    Colorectal cancer (CRC) is a heterogeneous disease in terms of molecular carcinogenic pathways. Based on recent findings regarding the multiple serrated neoplasia pathway, we revised an eight-marker panel for a new CIMP classification system. 1370 patients who received surgical resection for CRCs were classified into three CIMP subtypes (CIMP-N: 0-4 methylated markers, CIMP-P1: 5-6 methylated markers and CIMP-P2: 7-8 methylated markers). Our findings were validated in a separate set of high-risk stage II or stage III CRCs receiving adjuvant fluoropyrimidine plus oxaliplatin (n=950). A total of 1287/62/21 CRCs cases were classified as CIMP-N/CIMP-P1/CIMP-P2, respectively. CIMP-N showed male predominance, distal location, lower T, N category and devoid of BRAF mutation, microsatellite instability (MSI) and MLH1 methylation. CIMP-P1 showed female predominance, proximal location, advanced TNM stage, mild decrease of CK20 and CDX2 expression, mild increase of CK7 expression, BRAF mutation, MSI and MLH1 methylation. CIMP-P2 showed older age, female predominance, proximal location, advanced T category, markedly reduced CK20 and CDX2 expression, rare KRAS mutation, high frequency of CK7 expression, BRAF mutation, MSI and MLH1 methylation. CIMP-N showed better 5-year cancer-specific survival (CSS; HR=0.47; 95% CI: 0.28-0.78) in discovery set and better 5-year relapse-free survival (RFS; HR=0.50; 95% CI: 0.29-0.88) in validation set compared with CIMP-P1. CIMP-P2 showed marginally better 5-year CSS (HR=0.28, 95% CI: 0.07-1.22) in discovery set and marginally better 5-year RFS (HR=0.21, 95% CI: 0.05-0.92) in validation set compared with CIMP-P1. CIMP subtypes classified using our revised system showed different clinical outcomes, demonstrating the heterogeneity of multiple serrated precursors of CIMP-positive CRCs.

  18. Microstructure formation in partially melted zone during gas tungsten arc welding of AZ91 Mg cast alloy

    Zhu Tianping; Chen, Zhan W.; Gao Wei

    2008-01-01

    During gas tungsten arc (GTA) welding of AZ91 Mg cast alloy, constitutional liquid forms locally in the original interdendritic regions in the partially melted zone (PMZ). The PMZ re-solidification behaviour has not been well understood. In this study, the gradual change of the re-solidification microstructure within PMZ from base metal side to weld metal side was characterised. High cooling rate experiments using Gleeble thermal simulator were also conducted to understand the morphological change of the α-Mg/β-Mg 17 Al 12 phase interface formed during re-solidification after partial melting. It was found that the original partially divorced eutectic structure has become a more regular eutectic phase in most of the PMZ, although close to the fusion boundary the re-solidified eutectic is again a divorced one. Proceeding the eutectic re-solidification, if the degree of partial melting is sufficiently high, α-Mg re-solidified with a cellular growth, resulting in a serrated interface between α-Mg and α-Mg/β-Mg 17 Al 12 in the weld sample and between α-Mg and β-Mg 17 Al 12 (fully divorced eutectic) in Gleeble samples. The morphological changes affected by the peak temperature and cooling rate are also explained

  19. Dye-sensitized solar cell based on AZO/Ag/AZO multilayer transparent conductive oxide film

    Qi, Jin-He; Li, Ying [School of Materials Science and Engineering, Shanghai University, 149 Yanchang Road, Shanghai 200072 (China); Duong, Thanh-Tung; Choi, Hyung-Jin [Department of Materials Engineering, Chungnam National University, Daeduk Science Town, 305-764 Daejeon (Korea, Republic of); Yoon, Soon-Gil, E-mail: sgyoon@cnu.ac.kr [Department of Materials Engineering, Chungnam National University, Daeduk Science Town, 305-764 Daejeon (Korea, Republic of)

    2013-04-15

    Highlights: ► AZO/Ag/AZO (AAA) multilayer was used for working electrode of DSSC cell. ► The 100 nm-thick Nb-doped TiO{sub 2} layer showed a good blocking effect. ► The DSSC cell by AAA TCO material showed the highest efficiency of about 3.25%. -- Abstract: Niobium-doped TiO{sub 2} blocking layer and Al-doped ZnO (AZO)/Ag/AZO (AAA) TCO layers were grown onto glass substrate using pulsed laser deposition (PLD) and direct current (dc)/radio-frequency (rf) sputtering at room temperature, respectively for dye-sensitized solar cell (DSSC) applications. The 100 nm-thick NTO layer showed a blocking effect for the oxygen diffusion into AAA layer and for the recombination of the electrons. The DSSC cell composed of the NTO (100 nm)/AAA (400 nm) showed the highest photo-electrical efficiency of about 3.25%. An insertion of aluminum foil between serrated clip and AAA (100 nm) TCO improved a photo-conversion efficiency of the DSSC.

  20. Gamma ray induced mutants in Coleus

    Vasudevan, K.; Jos, J.S.

    1988-01-01

    The germplasm collection of Chinese potato (Coleus parviflorus Benth) contains almost no variation for yield contributing traits. The crop does not produce seeds. Treatment of underground tubers with 1 kR, 2 kR, 3 kR and 4 kR gamma rays resulted in 50 morphologically different mutants which are maintained as mutant clones. In the M 1 V 1 generation, suspected mutant sprouts, were carefully removed and grown separately. The most interesting mutant types are the following: (i) erect mutant with spoon shaped light green leaves, 30 cm long inflorescences against 20 cm in the control, cylindrical tubers measuring ca. 7.0 cm long and 3 cm girth against 4 cm and 2.5 cm in the control (ii) early mutants 1 and 2, one having less leaf serration, the other having light green small leaves and dwarf type (iii) fleshy leaf mutant, dark green, thick and smooth leaves. Control plants spread almost in 1 m 2 area and bear tubers from the nodes of branches. In the early mutants tuber formation is mainly restricted to the base of the plant, which makes harvest easier. The crop usually matures within 150 - 160 days, the early mutants are ready for harvest 100 days after planting. As the mutants are less spreading, the yield could be increased by closer spacing

  1. Genetic characteristics of mitochondrial DNA was associated with colorectal carcinogenesis and its prognosis.

    Jae-Ho Lee

    Full Text Available Clinical value of mitochondrial DNA has been described in colorectal cancer (CRC. To clarify its role in colorectal carcinogenesis, mitochondrial microsatellite instability (mtMSI and other markers were investigated in CRCs and their precancerous lesions, as a multitier genetic study. DNA was isolated from paired normal and tumoral tissues in 78 tubular adenomas (TAs, 34 serrated polyps (SPs, and 100 CRCs. mtMSI, nucleus microsatellite instability (nMSI, KRAS mutation, and BRAF mutation were investigated in these tumors and their statistical analysis was performed. mtMSI was found in 30% of CRCs and 21.4% of precancerous lesions. Mitochondrial copy number was higher in SPs than TAs and it was associated with mtMSI in low grade TAs. KRAS and BRAF mutations were mutually exclusive in TAs and SPs. CRCs with mtMSI showed shorter overall survival times than the patients without mtMSI. In CRCs without nMSI or BRAF mutation, mtMSI was a more accurate marker for predicting prognosis. The genetic change of mitochondrial DNA is an early and independent event in colorectal precancerous lesions and mtMSI and mitochondrial contents are associated with the tubular adenoma-carcinoma sequence, resulting in poor prognosis. This result suggested that the genetic change in mitochondrial DNA appears to be a possible prognosis marker in CRC.

  2. quatre-quart1 is an indispensable U12 intron-containing gene that plays a crucial role in Arabidopsis development.

    Kwak, Kyung Jin; Kim, Bo Mi; Lee, Kwanuk; Kang, Hunseung

    2017-05-17

    Despite increasing understanding of the importance of the splicing of U12-type introns in plant development, the key question of which U12 intron-containing genes are essential for plant development has not yet been explored. Here, we assessed the functional role of the quatre-quart1 (QQT1) gene, one of the ~230 U12 intron-containing genes in Arabidopsis thaliana. Expression of QQT1 in the U11/U12-31K small nuclear ribonucleoprotein mutant (31k) rescued the developmental-defect phenotypes of the 31k mutant, whereas the miRNA-mediated qqt1 knockdown mutants displayed severe defects in growth and development, including severely arrested stem growth, small size, and the formation of serrated leaves. The structures of the shoot apical meristems in the qqt1 mutants were abnormal and disordered. Identification of QQT1-interacting proteins via a yeast two-hybrid screening and a firefly luciferase complementation-imaging assay revealed that a variety of proteins, including many chloroplast-targeted proteins, interacted with QQT1. Importantly, the levels of chloroplast-targeted proteins in the chloroplast were reduced, and the chloroplast structure was abnormal in the qqt1 mutant. Collectively, these results provide clear evidence that QQT1 is an indispensable U12 intron-containing gene whose correct splicing is crucial for the normal development of Arabidopsis. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  3. Depletion of Arabidopsis SC35 and SC35-like serine/arginine-rich proteins affects the transcription and splicing of a subset of genes.

    Yan, Qingqing; Xia, Xi; Sun, Zhenfei; Fang, Yuda

    2017-03-01

    Serine/arginine-rich (SR) proteins are important splicing factors which play significant roles in spliceosome assembly and splicing regulation. However, little is known regarding their biological functions in plants. Here, we analyzed the phenotypes of mutants upon depleting different subfamilies of Arabidopsis SR proteins. We found that loss of the functions of SC35 and SC35-like (SCL) proteins cause pleiotropic changes in plant morphology and development, including serrated leaves, late flowering, shorter roots and abnormal silique phyllotaxy. Using RNA-seq, we found that SC35 and SCL proteins play roles in the pre-mRNA splicing. Motif analysis revealed that SC35 and SCL proteins preferentially bind to a specific RNA sequence containing the AGAAGA motif. In addition, the transcriptions of a subset of genes are affected by the deletion of SC35 and SCL proteins which interact with NRPB4, a specific subunit of RNA polymerase II. The splicing of FLOWERING LOCUS C (FLC) intron1 and transcription of FLC were significantly regulated by SC35 and SCL proteins to control Arabidopsis flowering. Therefore, our findings provide mechanistic insight into the functions of plant SC35 and SCL proteins in the regulation of splicing and transcription in a direct or indirect manner to maintain the proper expression of genes and development.

  4. Tensile flow behaviour of 2.25Cr-1Mo ferritic steel base metal an simulated heat affected zone structures of 2.25 Cr-1Mo weld joint

    Laha, K.; Chandravathi, K.S.; Rao, K.B.S.; Mannan, S. L.; Sastry, D.H.

    1999-01-01

    Tensile tests in the temperature range 298 to 873 K have been performed on 2.25Cr-1Mo base metal and simulated heat affected zone (HAZ) structures of its weld joint, namely coarse grain bainite, fine grain bainite and intercritical structure. Tensile flow behaviour of all the microstructural conditions could be adequately described by the Hollomon equation (σ = K 1 ε n1 ) at higher (>623 K) temperatures. Deviation from the Hollomon equation was observed at low strains and lower ( 1 ε n1 + exp (K 2 + n 2 ε), was found to describe the flow curve. In general, the flow parameters n 1 , K 1 , n 2 and K 2 were found to decrease with increase in temperature except in the intermediate temperature range (423 to 623 K). Peaks/plateaus were observed in their variation with temperature in the intermediate temperature range coinciding with the occurrence of serrated flow in the load-elongation curve. The n 1 value increased and the K 1 value decreased with the type of microstructure in the order: coarse grain bainite, fine grain bainite, base metal and intercritical structure. The variation of n 1 with microstructure has been rationalized on the basis of mean free path (MFP) of dislocations which is directly related to the inter-particle spacing. Larger MFP of dislocations lead to higher strain hardening exponents n 1 . (orig.)

  5. A new Xenacanthiformes shark (Chondrichthyes, Elasmobranchii from the Late Paleozoic Rio do Rasto Formation (Paraná Basin, Southern Brazil

    VICTOR E. PAULIV

    2014-03-01

    Full Text Available The Brazilian records on Xenacanthiformes include teeth and cephalic spines from the Parnaíba, Amazonas and Paraná basins. This work describes a new species of Xenacanthidae, collected in an outcrop of Serrinha Member of Rio do Rasto Formation (Wordian to Wuchiapingian, Paraná Basin, municipality of Jacarezinho, State of Paraná. The teeth of the new species are two or three-cuspidated and the aboral surface show a smooth concavity and one rounded basal tubercle. The coronal surface presents one semi-spherical and subcircular coronal button, and also two lateral main cusps and one central (when present with less than one fifth of the size of the lateral cusps in the labial portion. The lateral cusps are asymmetric or symmetric, rounded in transversal section, lanceolate in longitudinal section, devoid of lateral carinae and lateral serrations, and with few smooth cristae of enameloid. In optical microscope the teeth show a trabecular dentine (osteodentine base, while the cusps are composed by orthodentine, and the pulp cavities are non-obliterated by trabecular dentine. The fossil assemblage in the same stratigraphical level and in the whole Rio do Rasto Formation indicates another freshwater record for xenacanthid sharks.

  6. A new Xenacanthiformes shark (Chondrichthyes, Elasmobranchii) from the Late Paleozoic Rio do Rasto Formation (Paraná Basin), Southern Brazil.

    Pauliv, Victor E; Dias, Eliseu V; Sedor, Fernando A; Ribeiro, Ana Maria

    2014-03-01

    The Brazilian records on Xenacanthiformes include teeth and cephalic spines from the Parnaíba, Amazonas and Paraná basins. This work describes a new species of Xenacanthidae, collected in an outcrop of Serrinha Member of Rio do Rasto Formation (Wordian to Wuchiapingian), Paraná Basin, municipality of Jacarezinho, State of Paraná. The teeth of the new species are two or three-cuspidated and the aboral surface show a smooth concavity and one rounded basal tubercle. The coronal surface presents one semi-spherical and subcircular coronal button, and also two lateral main cusps and one central (when present) with less than one fifth of the size of the lateral cusps in the labial portion. The lateral cusps are asymmetric or symmetric, rounded in transversal section, lanceolate in longitudinal section, devoid of lateral carinae and lateral serrations, and with few smooth cristae of enameloid. In optical microscope the teeth show a trabecular dentine (osteodentine) base, while the cusps are composed by orthodentine, and the pulp cavities are non-obliterated by trabecular dentine. The fossil assemblage in the same stratigraphical level and in the whole Rio do Rasto Formation indicates another freshwater record for xenacanthid sharks.

  7. Surgical hazards posed by marine and freshwater animals in Florida.

    Howard, R J; Burgess, G H

    1993-11-01

    Marine and freshwater animals can cause injury to humans by biting, stinging, being poisonous to eat, and causing infections. Biting aquatic animals in Florida include sharks, barracudas, alligators, and moray eels. Devitalized tissue should be débrided, and vascular, neurologic, and tendinous injuries should be repaired. Radiographs should be obtained to examine the injury sit for fractures and retained foreign bodies (teeth). The spines of stingrays and marine catfish can cause soft tissue injury and infection. The spine has a recurved, serrated shape that may cause further injury and break if it is pulled out. The venom may cause local tissue necrosis requiring débridement. Soft tissue infections with marine Vibrio bacteria can occur after eating raw oysters or receiving even minor injuries from marine animals. Thirty-one individuals developed soft tissue infections, 49 developed sepsis, and 23 developed both sepsis and soft tissue infection with marine Vibrio species during a 12-year period. Sixteen patients developed necrotizing soft tissue infections. Treatment is with antibiotics and débridement when necrosis occurs.

  8. Modelling Of Residual Stresses Induced By High Speed Milling Process

    Desmaison, Olivier; Mocellin, Katia; Jardin, Nicolas

    2011-01-01

    Maintenance processes used in heavy industries often include high speed milling operations. The reliability of the post-process material state has to be studied. Numerical simulation appears to be a very interesting way to supply an efficient residual stresses (RS) distribution prediction.Because the adiabatic shear band and the serrated chip shaping are features of the austenitic stainless steel high speed machining, a 2D high speed orthogonal cutting model is briefly presented. This finite element model, developed on Forge registered software, is based on data taken from Outeiro and al.'s paper [1]. A new behaviour law fully coupling Johnson-Cook's constitutive law and Latham and Cockcroft's damage model is detailed in this paper. It ensures results that fit those found in literature.Then, the numerical tools used on the 2D model are integrated to a 3D high speed milling model. Residual stresses distribution is analysed, on the surface and into the depth of the material. Various revolutions and passes of the two teeth hemispheric mill on the workpiece are simulated. Thus the sensitivity of the residual stresses generation to the cutting conditions can be discussed. In order to validate the 3D model, a comparison of the cutting forces measured by EDF R and D to those given by numerical simulations is achieved.

  9. Characterization of Urea Versus hmta in the Preparation of Zinc Oxide NANOSTRUCTURES by Catalytic Immersion Method Grown on Gold-seeded Silicon Substrate

    Azlinda Abdul Aziz; Khusaimi, Z.; Rusop, M.

    2011-01-01

    Zinc oxide (ZnO) nano structured prepared by immersed method were successfully grown on gold-seeded silicon substrate using Zinc nitrate hexahydrate (Zn(NO 3 ) 2 .6H 2 O) as a precursor was stabilized by a non-toxic urea (CH 4 N 2 O) in a ratio of 1:2 and 1:1 ratio of hexamethylene tetraamine (HMTA). The effect of changing the stabilizer of ZnO solution on the crystal structure, morphology and photoluminescence properties of the resultant ZnO is investigated. X-ray diffraction of the synthesized ZnO shows hexagonal zincite structure. The morphology of the ZnO was characterizing using Field Emission Scanning Electron Microscope (FESEM). The growth of ZnO using urea as stabilizer shows the clusters of ZnO nano flower with serrated broad petals and sharp tips of approximately 25 nm were interestingly formed. ZnO in HMTA showed growth of nano rods. The structures has high surface area, is a potential metal oxide nano structures to be develop for optoelectronic devices and chemical sensors. The formation of ZnO nano structures is found to be significantly affected by the stabilizer. (author)

  10. Investigation of nucleation processes during dynamic recrystallization of ice using cryo-EBSD.

    Chauve, T; Montagnat, M; Barou, F; Hidas, K; Tommasi, A; Mainprice, D

    2017-02-13

    Nucleation mechanisms occurring during dynamic recrystallization play a crucial role in the evolution of microstructures and textures during high temperature deformation. In polycrystalline ice, the strong viscoplastic anisotropy induces high strain heterogeneities between grains which control the recrystallization mechanisms. Here, we study the nucleation mechanisms occurring during creep tests performed on polycrystalline columnar ice at high temperature and stress (T=-5°C;σ=0.5 MPa) by post-mortem analyses of deformation microstructures using cryogenic electron backscatter diffraction. The columnar geometry of the samples enables discrimination of the nuclei from the initial grains. Various nucleation mechanisms are deduced from the analysis of the nuclei relations with the dislocation sub-structures within grains and at grain boundaries. Tilt sub-grain boundaries and kink bands are the main structures responsible for development of polygonization and mosaic sub-structures. Nucleation by bulging at serrated grain boundaries is also an efficient nucleation mechanism near the grain boundaries where strain incompatibilities are high. Observation of nuclei with orientations not related to the 'parent' ones suggests the possibility of 'spontaneous' nucleation driven by the relaxation of the dislocation-related internal stress field. The complexity of the nucleation mechanisms observed here emphasizes the impact of stress and strain heterogeneities on dynamic recrystallization mechanisms.This article is part of the themed issue 'Microdynamics of ice'. © 2016 The Author(s).

  11. Kankuamo, a new theraphosid genus from Colombia (Araneae, Mygalomorphae), with a new type of urticating setae and divergent male genitalia

    Perafán, Carlos; Galvis, William; Gutiérrez, Miguel; Pérez-Miles, Fernando

    2016-01-01

    Abstract A new monotypic Theraphosidae genus, Kankuamo Perafán, Galvis & Pérez-Miles, gen. n., is described from Colombia, with a new type of urticating setae. These setae differ from others principally by having a small distal oval patch of lanceolate reversed barbs. Males of Kankuamo gen. n. additionally differ by having a palpal bulb organ very divergent from all known species, with many conspicuous keels dispersed across the median tegulum to the tip, mostly with serrated edges. Females differ by having spermathecae with a single notched receptacle, with two granulated lobes and several irregular sclerotized longitudinal striations. The new urticating setae, type VII, is characterized, illustrated and its releasing mechanism is discussed. It is hypothesized that these setae are the first in Theraphosinae subfamily whose release mechanism is by direct contact. Kankuamo gen. n. is described and illustrated on the basis of the type species Kankuamo marquezi Perafán, Galvis & Gutiérrez, sp. n., and their remarkable characteristics, morphological affinities and cladistic relationship are analyzed. PMID:27551189

  12. Dynamic recrystallization of a new nickel-based alloy for 700 °C A-USC power plant applications with different initial states: as-homogenized and as-forged

    Wu, Yunsheng [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhang, Maicang, E-mail: mczhang@ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Xie, Xishan [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Lin, Fusheng; Zhao, Shuangqun [Shanghai Power Equipment Research Institute, Shanghai 200240 (China)

    2016-04-26

    The hot deformation behavior of a new-designed nickel-based alloy with different initial states were investigated by isothermal compression at temperature range of 1000–1200 °C with strain rate of 0.01–20 s{sup −1} and nominal strain of 15–70% on a Gleeble-1500 thermo-mechanical simulator. The correlation of dynamic recrystallization (DRX) mechanism and initial alloy states as well as deformation parameters were analyzed in detail by means of transmission electron microscope (TEM) and electron backscattered diffraction (EBSD). For homogenized alloy with extremely large grains, the DRX mechanism transforms partly from discontinuous dynamic recrystallization (DDRX) characterized with serrated and bulging grain boundary into continuous dynamic recrystallization (CDRX) operated by progressive sub-grain merging and rotation with the increasing strain rate and decreasing deformation temperature, which results from the poor deformation compatibility in the alloy with extremely large grains. However, the dominant DRX mechanism in as-forged alloy is DDRX almost at all the deformation conditions, and CDRX is only an assistant mechanism, which caused by the initial inhomogeneous dislocation distribution and fine grains. In consequence, the initial alloy states have a significant influence on the DRX, which cannot be ignored in the hot deformation research.

  13. Nanomechanics of slip avalanches in amorphous plasticity

    Cao, Penghui; Dahmen, Karin A.; Kushima, Akihiro; Wright, Wendelin J.; Park, Harold S.; Short, Michael P.; Yip, Sidney

    2018-05-01

    Discrete stress relaxations (slip avalanches) in a model metallic glass under uniaxial compression are studied using a metadynamics algorithm for molecular simulation at experimental strain rates. The onset of yielding is observed at the first major stress drop, accompanied, upon analysis, by the formation of a single localized shear band region spanning the entire system. During the elastic response prior to yielding, low concentrations of shear transformation deformation events appear intermittently and spatially uncorrelated. During serrated flow following yielding, small stress drops occur interspersed between large drops. The simulation results point to a threshold value of stress dissipation as a characteristic feature separating major and minor avalanches consistent with mean-field modeling analysis and mechanical testing experiments. We further interpret this behavior to be a consequence of a nonlinear interplay of two prevailing mechanisms of amorphous plasticity, thermally activated atomic diffusion and stress-induced shear transformations, originally proposed by Spaepen and Argon, respectively. Probing the atomistic processes at widely separate strain rates gives insight to different modes of shear band formation: percolation of shear transformations versus crack-like propagation. Additionally a focus on crossover avalanche size has implications for nanomechanical modeling of spatially and temporally heterogeneous dynamics.

  14. In-Situ Three-Dimensional Shape Rendering from Strain Values Obtained Through Optical Fiber Sensors

    Chan, Hon Man (Inventor); Parker, Jr., Allen R. (Inventor)

    2015-01-01

    A method and system for rendering the shape of a multi-core optical fiber or multi-fiber bundle in three-dimensional space in real time based on measured fiber strain data. Three optical fiber cores arc arranged in parallel at 120.degree. intervals about a central axis. A series of longitudinally co-located strain sensor triplets, typically fiber Bragg gratings, are positioned along the length of each fiber at known intervals. A tunable laser interrogates the sensors to detect strain on the fiber cores. Software determines the strain magnitude (.DELTA.L/L) for each fiber at a given triplet, but then applies beam theory to calculate curvature, beading angle and torsion of the fiber bundle, and from there it determines the shape of the fiber in s Cartesian coordinate system by solving a series of ordinary differential equations expanded from the Frenet-Serrat equations. This approach eliminates the need for computationally time-intensive curve-tilting and allows the three-dimensional shape of the optical fiber assembly to be displayed in real-time.

  15. Plasticity - a limiting case of creep

    Cords, H.; Kleist, G.; Zimmermann, R.

    1986-11-01

    The present work is an attempt to develop further the so-called unified theory for viscoplastic constitutive equations as used for metals or metal alloys. Typically, in similar approaches creep strains and plastic strains are derived from one common stress-strain relationship for inelastic strain rates employing an internal stress function as a back stress. Some novel concepts concerning the definition of the internal stress, plastic yielding and material hardening have been introduced, formulated mathematically and tested for correspondence with a standard type of materials behaviour. As a result of the investigations a system of simultaneous differential equations is defined which has been used to elaborate a common view on a number of different material effects observed in creep and plasticity i.e. normal and inverted primary creep, recoverable creep, incubation time and anelasticity in stress reduction, negative stress relaxation, plastic yielding, perfect plasticity, negative strain rate sensitivity, serrated flow, strain hardening in monotonic and cyclic loading. The theoretical approach is mainly based on a lateral contraction movement not following rigidly the longitudinal extension of the material specimen by a prescribed constant value of Poisson's ratio as usual, but following the axial extension in a process of drag which allows for retardation and which simultaneously impedes the longitudinal straining. (orig.) [de

  16. Characterization of elevated temperature properties of heat exchanger and steam generator alloys

    Wright, J.K.; Carroll, L.J.; Cabet, C.; Lillo, T.M.; Benz, J.K.; Simpson, J.A.; Lloyd, W.R.; Chapman, J.A.; Wright, R.N.

    2012-01-01

    The Next Generation Nuclear Plant project is considering Alloy 800H and Alloy 617 for steam generator and intermediate heat exchangers. It is envisioned that a steam generator would operate with reactor outlet temperatures from 750 to 800 °C, while an intermediate heat exchanger for primary to secondary helium would operate up to an outlet temperature of 950 °C. Although both alloys are of interest due in part to their technical maturity, a number of specific properties require further characterization for design of nuclear components. Strain rate sensitivity of both alloys has been characterized and is found to be significant above 600 °C. Both alloys also exhibit dynamic strain aging, characterized by serrated flow, over a wide range of temperatures and strain rates. High temperature tensile testing of Alloy 617 and Alloy 800H has been conducted over a range of temperatures. Dynamic strain aging is a concern for these materials since it is observed to result in reduced ductility for many solid solution alloys. Creep, fatigue, and creep–fatigue properties of Alloy 617 have been measured as well, with the goal of determining the influence of the temperature, strain rate and atmosphere on the creep–fatigue life of Alloy 617. Elevated temperature properties and implications for codification of the alloys will be described.

  17. Colorectal cancer: genetic abnormalities, tumor progression, tumor heterogeneity, clonal evolution and tumor-initiating cells.

    Testa, Ugo; Pelosi, Elvira; Castelli, Germana

    2018-04-13

    Colon cancer is the third most common cancer worldwide. Most colorectal cancer occurrences are sporadic, not related to genetic predisposition or family history; however, 20-30% of patients with colorectal cancer have a family history of colorectal cancer and 5% of these tumors arise in the setting of a Mendelian inheritance syndrome. In many patients, the development of a colorectal cancer is preceded by a benign neoplastic lesion: either an adenomatous polyp or a serrated polyp. Studies carried out in the last years have characterized the main molecular alterations occurring in colorectal cancers, showing that the tumor of each patient displays from two to eight driver mutations. The ensemble of molecular studies, including gene expression studies, has led to two proposed classifications of colorectal cancers, with the identification of four/five non-overlapping groups. The homeostasis of the rapidly renewing intestinal epithelium is ensured by few stem cells present at the level of the base of intestinal crypts. Various experimental evidence suggests that colorectal cancers may derive from the malignant transformation of intestinal stem cells or of intestinal cells that acquire stem cell properties following malignant transformation. Colon cancer stem cells seem to be involved in tumor chemoresistance, radioresistance and relapse.

  18. Trifurcatia flabellata n. gen. n. sp., a putative monocotyledon angiosperm from the Lower Cretaceous Crato Formation (Brazil

    B. Mohr

    2002-01-01

    Full Text Available The Lower Cretaceous Crato Formation (northeast Brazil contains plant remains, here described as Trifurcatia flabellata n. gen. and n. sp., consisting of shoot fragments with jointed trifurcate axes, each axis bearing a single amplexicaul serrate leaf at the apex. The leaves show a flabellate acrodromous to parallelodromous venation pattern, with several primary, secondary and higher order cross-veins. This very unique fossil taxon shares many characters with monocots. However, this fossil taxon exhibits additional features which point to a partly reduced, and specialized plant, which probably enabled this plant to grow in (seasonally dry, even salty environments. In der unterkretazischen Cratoformation (Nordostbrasilien sind Pflanzenfossilien erhalten, die hier als Trifurcatia flabellata n. gen. n. sp. beschrieben werden. Sie bestehen aus trifurcaten Achsen, mit einem apikalen amplexicaulen fächerförmigen serraten Blatt. Diese Blätter zeigen eine flabellate bis acrodrome-paralellodrome Aderung mit Haupt- und Nebenadern und transversale Adern 3. Ordnung. Diese Merkmale sind typisch für Monocotyledone. Allerdings weist dieses Taxon einige Merkmale auf, die weder bei rezenten noch fossilen Monocotyledonen beobachtet werden. Sie müssen als besondere Anpassungen an einen (saisonal trockenen und vielleicht übersalzenen Lebensraum dieser Pflanze interpretiert werden. doi:10.1002/mmng.20020050121

  19. Gamma ray induced mutants in Coleus

    Vasudevan, K; Jos, J S [Central Tuber Crops Research Institute, Trivandrum, Kerala (India)

    1988-07-01

    The germplasm collection of Chinese potato (Coleus parviflorus Benth) contains almost no variation for yield contributing traits. The crop does not produce seeds. Treatment of underground tubers with 1 kR, 2 kR, 3 kR and 4 kR gamma rays resulted in 50 morphologically different mutants which are maintained as mutant clones. In the M{sub 1}V{sub 1} generation, suspected mutant sprouts, were carefully removed and grown separately. The most interesting mutant types are the following: (i) erect mutant with spoon shaped light green leaves, 30 cm long inflorescences against 20 cm in the control, cylindrical tubers measuring ca. 7.0 cm long and 3 cm girth against 4 cm and 2.5 cm in the control (ii) early mutants 1 and 2, one having less leaf serration, the other having light green small leaves and dwarf type (iii) fleshy leaf mutant, dark green, thick and smooth leaves. Control plants spread almost in 1 m{sup 2} area and bear tubers from the nodes of branches. In the early mutants tuber formation is mainly restricted to the base of the plant, which makes harvest easier. The crop usually matures within 150 - 160 days, the early mutants are ready for harvest 100 days after planting. As the mutants are less spreading, the yield could be increased by closer spacing.

  20. Diet and trophic ecomorphology of the silverside, Odontesthes bonariensis, of the Salto Caxias reservoir, rio Iguaçu, Paraná, Brazil

    Fernanda Aparecida da Silva Cassemiro

    Full Text Available This study aims to analyze the diet and trophic ecomorphology of Odontesthes bonariensis, relating these features with species' abundance in the natural environment and in the Salto Caxias reservoir (at Iguaçu river after the reservoir's formation. The samples were carried out before (from March 1997 to February 1998- pre and after (from October 1998 to February 2001 - post 1 and 2 the damming. The stomach contents of 218 individuals were analyzed by occurrence and volumetric methods. O. bonariensis' diet is based on insects, scales, plants and detritus. Microcrustaceans (Cladocera and Copepoda were the main items, allowing the characterization of the species as zooplanktivore. The species has a superior position and protractible mouth, with small teeth, creating a serrated pattern, uniformly lined side by side. There are many gill rakers, that are long and close together (typical of filtering fishes; the stomach is ill defined and the intestine is short. There was a gradual increase of O. bonariensis' abundance during the period of field study, mainly after the second year of damming. This fact seems to be closely related with the high abundance and availability of zooplankton in the dammed environment, and also with the ability of the species to exploit this resource.

  1. The EGF repeat-specific O-GlcNAc-transferase Eogt interacts with notch signaling and pyrimidine metabolism pathways in Drosophila.

    Reto Müller

    Full Text Available The O-GlcNAc transferase Eogt modifies EGF repeats in proteins that transit the secretory pathway, including Dumpy and Notch. In this paper, we show that the Notch ligands Delta and Serrate are also substrates of Eogt, that mutation of a putative UDP-GlcNAc binding DXD motif greatly reduces enzyme activity, and that Eogt and the cytoplasmic O-GlcNAc transferase Ogt have distinct substrates in Drosophila larvae. Loss of Eogt is larval lethal and disrupts Dumpy functions, but does not obviously perturb Notch signaling. To identify novel genetic interactions with eogt, we investigated dominant modification of wing blister formation caused by knock-down of eogt. Unexpectedly, heterozygosity for several members of the canonical Notch signaling pathway suppressed wing blister formation. And importantly, extensive genetic interactions with mutants in pyrimidine metabolism were identified. Removal of pyrimidine synthesis alleles suppressed wing blister formation, while removal of uracil catabolism alleles was synthetic lethal with eogt knock-down. Therefore, Eogt may regulate protein functions by O-GlcNAc modification of their EGF repeats, and cellular metabolism by affecting pyrimidine synthesis and catabolism. We propose that eogt knock-down in the wing leads to metabolic and signaling perturbations that increase cytosolic uracil levels, thereby causing wing blister formation.

  2. Frequency and gravity of human envenomations caused by marine catfish (suborder siluroidei): a clinical and epidemiological study.

    Haddad, Vidal; Martins, Itamar Alves

    2006-06-15

    Catfish occur in marine and freshwater environments worldwide. They have three serrated venomous bony stings in the dorsal and pectoral fins that are used for defence against predators and are refilled by glandular tissues under the epithelium. However, some catfishes do not have poisonous glands next to the sting and cause traumatic wounds without poisoning. The objective of this study was to provide data for, and comment on, the epidemiological and clinical problems caused by marine catfish. The authors have observed, followed and documented 127 injuries caused by marine catfish stings during different phases of the envenoming over a time period of 8 years at three points along the Western Atlantic Ocean coast. The patients presented intense pain during the acute phase of envenoming and complications, such as bacterial and fungi infections and retention of bony fragments, in the later phase. Immersion of the affected extremity in hot water was used in about 20% of cases with excellent results. Injuries caused by marine catfish are common (about 20% of injuries caused by marine animals in a series of more than 700 injuries recorded by the author) and cause intense pain and later complications. Immersion of the affected extremity in hot water results in improvement in the acute phase, but does not prevent the appearance of secondary infection or foreign body reactions.

  3. Low cycle fatigue studies on a type 304 stainless steel

    Bhanu Sankara Rao, K.; Valsan, M.; Sandhya, R.; Ray, S.K.; Rodriguez, P.

    The effects of temperature and strain rate on the low cycle fatigue behaviour were investigated for an AISI 304 stainless steel under total axial strain control mode at 823 and 923 K. The fatigue life was strongly dependent on cyclic deformation rate for this material at these temperatures, decreasing markedly with decreasing strain rate. The cyclic stress-strain response recorded in the form of hysterisis loops exhibited serrations at low strain rates at 823 and 923 K. Cyclic stress-strain response at 823 K has shown an increase in saturation stress and decrease in plastic strain range whereas there is an increase in plastic strain range without marked variation in saturation stress level at 923 K with decreasing strain rate. It has been observed that there are three simultaneous effects namely environment, creep and cyclic strain ageing which contribute to the observed degradation in fatigue life at low strain rates. At 823 K, where the creep damage as well as environmental damage is relatively small, the fatigue life is considered mainly to be affected by dynamic strain ageing effect which depends on strain rate. At 923 K, on the other hand, the strain rate dependence of fatigue life is considered to be determined by the combination of creep and environmental effects. Deformation and fracture studies have also confirmed that the wedge type crack propagation is accelerated by oxidation effect. (author)

  4. The tensile properties of alloys 800H and 617 in the range 20 to 950deg C

    Abd El-Azim, M.E.; Ennis, P.J.; Schuster, H.; Nickel, H.

    1990-01-01

    The tensile properties of Alloy 800H and Alloy 617 in the solution treated condition and after ageing or carburization have been determined for the temperature range 20 to 950deg C. It was found that ageing at 900deg C prior to testing led to an increase in strength and a decrease in ductility at test temperatures up to 700deg C. Above 700deg C, there was no significant difference between the tensile properties of solution treated and aged material. Carburization caused a severe loss of ductility in both alloys at temperatures of 20 to around 800deg C, but the ductility increased sharply at test temperatures above 800deg C, accompanied by a change in the fracture mode from fracture of the carbide particles themselves to void formation and separation at the carbide/matrix interface. The correlation between tensile properties and creep data was investigated in tests carried out at different strain rates. Reasonable agreement was found at 800 to 950deg C for Alloy 617 and at 800 to 900deg C for Alloy 800H. Strain ageing effects were observed in both alloys at some temperatures and strain rates; these effects were serrated flow, negative strain rate sensitivity, peaks in the normalized UTS-temperature curves and plateaus in the elongation-temperature curves. The experimental results were interpreted in the light of two current models for strain ageing, the dislocation-dislocation interaction model and the dislocation-solute interaction model. (orig.) [de

  5. Influence of temperature on a low-cycle fatigue behavior of a ferritic stainless steel

    Kabir, S. M. Humayun [Chittagong University of Engineering and Technology, Chittagong (Bangladesh); Yeo, Tae in [University of Ulsan, Ulsan (Korea, Republic of)

    2014-07-15

    The main objective of this study is to reveal the effect of dynamic strain ageing (DSA) on a ferritic stainless steel with detail relation to monotonic and cyclic responses over a wide range of temperatures. For assessing the effect of strain rate on mechanical properties, tensile test results are studied at two different strain rates of 2X10{sup -3} /s and 2X10{sup -4} /s. Typical responses of this material are compared with other alloy in literatures that exhibits DSA. Serrations in monotonic stress-strain curves and anomalous dependence of tensile properties with temperatures are attributed to the DSA effect. The low cycle fatigue curves exhibit prominent hardening and negative temperature dependence of half-life plastic strain amplitude in temperatures between 300 .deg. C - 500 .deg. C which can be explained by DSA phenomenon. The regime for dependence of marked cyclic hardening lies within the DSA regime of anomalous dependence of flow stress and dynamic strain hardening stress with temperature and negative strain rate sensitivity regime of monotonic response. It is believed that shortened fatigue life observed in the intermediate temperature is mainly due to the adverse effect of DSA. An empirical life prediction model is addressed for as-received material to consider the effect of temperature on fatigue life. The numbers of load reversals obtained from experiment and predicted from fatigue parameter are compared and found to be in good agreement.

  6. EPHB2 germline variants in patients with colorectal cancer or hyperplastic polyposis

    Kokko, Antti; Tomlinson, Ian PM; Vahteristo, Pia; Aaltonen, Lauri A; Laiho, Päivi; Lehtonen, Rainer; Korja, Sanna; Carvajal-Carmona, Luis G; Järvinen, Heikki; Mecklin, Jukka-Pekka; Eng, Charis; Schleutker, Johanna

    2006-01-01

    Ephrin receptor B2 (EPHB2) has recently been proposed as a novel tumor suppressor gene in colorectal cancer (CRC). Inactivation of the gene has been shown to correlate with progression of colorectal tumorigenesis, and somatic mutations have been reported in both colorectal and prostate tumors. Here we have analyzed the EPHB2 gene for germline alterations in 101 individuals either with 1) CRC and a personal or family history of prostate cancer (PC), or 2) intestinal hyperplastic polyposis (HPP), a condition associated with malignant degeneration such as serrated adenoma and CRC. Four previously unknown missense alterations were observed, which may be associated with the disease phenotype. Two of the changes, I361V and R568W, were identified in Finnish CRC patients, but not in over 300 Finnish familial CRC or PC patients or more than 200 population-matched healthy controls. The third change, D861N, was observed in a UK HPP patient, but not in additional 40 UK HPP patients or in 200 UK healthy controls. The fourth change R80H, originally identified in a Finnish CRC patient, was also found in 1/106 familial CRC patients and in 9/281 healthy controls and is likely to be a neutral polymorphism. We detected novel germline EPHB2 alterations in patients with colorectal tumors. The results suggest a limited role for these EPHB2 variants in colon tumor predisposition. Further studies including functional analyses are needed to confirm this

  7. Armorloricus kristenseni (Nanaloricidae, Loricifera), a new species from the Faroe Bank (North Atlantic)

    Heiner, Iben

    2004-10-01

    The year 2003 was the 20th anniversary of the description of the phylum Loricifera and of the type species Nanaloricus mysticus Kristensen, 1983, from Roscoff, France. To honour this occasion, a loriciferan of the newly described genus Armorloricus, from Roscoff, will be named after the discoverer of the phylum Loricifera, Professor Reinhardt Møbjerg Kristensen. This new species, Armorloricus kristenseni sp. nov., was found during two cruises to the Faroe Bank in the North Atlantic, in 1992 and 2001. The specimens were collected at three different stations (one in 1992 and two in 2001) all situated on the plateau itself at a depth of approximately 150 m. The adults are characterized by their elongated shape, the large lateral lorica plates, the very long, feather-like scalids in the third row, the long claspers in the male, and the wheel-like structure of the subcuticle glands inside the lorica plates on the ventral side. The Higgins-larvae are characterized by their long middorsal scalid with a hexagonal base and the small hook-shaped midventral pair of scalids in row 4. Furthermore, the long, paired, serrated scalids in row 6 and the asymmetrical basal plate with numerous teeth in row 7 are also unique characters. For an easier between-family comparison of the different scalids and rows on the introvert, the second row in the adults of Nanaloricidae has been split up into two rows, so that all adult loriciferans posses a total of nine rows on the introvert.

  8. Study of Near-Cup Droplet Breakup of an Automotive Electrostatic Rotary Bell (ESRB Atomizer Using High-Speed Shadowgraph Imaging

    Jacob E. Wilson

    2018-05-01

    Full Text Available Electrostatic Rotary bell (ESRB atomizers are used as the dominant means of paint application by the automotive industry. They utilize the high rotational speed of a cup to induce primary atomization of a liquid along with shaping air to provide secondary atomization and transport. In order to better understand the fluid breakup mechanisms involved in this process, high-speed shadowgraph imaging was used to visualize the edge of a serrated rotary bell at speeds varying between 5000 and 12,000 RPM and with a water flow rate of 250 ccm. A multi-step image processing algorithm was developed to differentiate between ligaments and droplets during the primary atomization process. The results from this experiment showed that higher bell speeds resulted in a 26.8% reduction in ligament and 22.3% reduction in droplet Sauter Mean Diameters (SMD. Additionally, the ligament (ranging from 40 to 400 μm diameters formed bimodal distributions, while the droplet (ranging from 40 to 300 μm diameters formed a normal distribution. Velocities were also measured using particle tracking velocimetry, in which size-dependent velocities could then be computed. Droplet velocities were affected more by rotational speed than droplet SMD, while ligaments were affected by other factors than the rotational speed and ligament SMD.

  9. Effect of LEO cycling on 125 Ah advanced design IPV nickel-hydrogen battery cells

    Smithrick, John J.; Hall, Stephen W.

    1990-01-01

    An advanced 125 Ah individual pressure vessel (IPV) nickel-hydrogen cell was designed. The primary function of the advanced cell is to store and deliver energy for long-term, low earth-orbit (LEO) spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent potassium hydroxide (KOH) electrolyte, (2) use of a patented catalyzed wall wick, (3) use of serrated-edge separators to facilitate gaseous oxygen and hydrogen flow within the cell, while still maintaining physical contact with the wall wick for electrolyte management, and (4) use of a floating rather than a fixed stack (state-of-the-art) to accommodate nickel electrode expansion. Six 125-Ah flight cells based on this design were fabricated by Eagle-Picher. Three of the cells contain all of the advanced features (test cells) and three are the same as the test cells except they don't have catalyst on the wall wick (control cells). All six cells are in the process of being evaluated in a LEO cycle life test. The cells have accumulated about 4700 LEO cycles (60 percent DOD 10 C). There have been no cell failures; the catalyzed wall wick cells, however, are performing better.

  10. Characteristics of Bone Injuries Resulting from Knife Wounds Incised with Different Forces.

    Humphrey, Caitlin; Kumaratilake, Jaliya; Henneberg, Maciej

    2017-11-01

    The aim of this research was to experimentally determine the characteristics of incised bone wounds, which are commonly found in defense injuries. A specially constructed pivoting arm device was used to inflict wounds with controlled forces and direction. Five knives were selected to inflict the wounds on porcine forelimbs. Eight incised wounds were made per knife per force. A larger knife and a greater force caused longer and wider bone wounds. Comparisons of individual knives at the two forces produced varying results in the bone wounds. A correlation was seen between the force and the length (r = 0.69), width (r = 0.63), and depth (r = 0.57) of bone wounds. Serrated-edge and nonserrated knives can be distinguished from the appearance of the wound. The outcomes may be applicable in forensic investigations to ascertain the forces associated with incised wounds and identify the specific knife used. © 2017 American Academy of Forensic Sciences.

  11. Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate

    Xia, Li-gang; Li, Ai-ju; Yin, Qiang [Key Laboratory for Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Shandong Key Laboratory of Engineering Ceramics, Shandong University, Jinan 250061 (China); Wang, Wei-qiang [School of Mechanical Engineering, Shandong University, Jinan 250061 (China); Lin, Heng; Zhao, Yi-bo [School of Material Science and Engineering, Shandong University, Jinan 250061 (China)

    2008-03-15

    In the paper, a kind of polyphenylene sulfide (PPS) resin/graphite (G) composite for bipolar plate was prepared by using the PPS resin as adhesive and simple hot pressing. The influences of the resin content, the molding temperature and holding time on the conductivity and the bending strength of the PPS/G composite bipolar plate were investigated firstly and then the optimum content and the preparing conditions of the composite were obtained. The experimental results show that the electrical conductivity decreases and the bending strength reveals a serrated variation with increase in PPS resin content; when the holding time is certain, the conductivity decreases and the bending strength increases with the molding temperature increasing. The experimental results further show that the effect of the holding time on the properties of the composite is different at different molding temperatures. The PPS/G composite with 20% PPS resin content has electrical conductivity of 118.9 S cm{sup -1} and bending strength of 52.4 MPa when it molded at 380 C for 30 min, and has electrical conductivity of 105 S cm{sup -1}, bending strength of 55.7 MPa when it molded at 390 C for 30 min. The properties of the composites can meet the requirements of United States Department of Energy (DOE). (author)

  12. A quantitative framework for flower phenotyping in cultivated carnation (Dianthus caryophyllus L.).

    Chacón, Borja; Ballester, Roberto; Birlanga, Virginia; Rolland-Lagan, Anne-Gaëlle; Pérez-Pérez, José Manuel

    2013-01-01

    Most important breeding goals in ornamental crops are plant appearance and flower characteristics where selection is visually performed on direct offspring of crossings. We developed an image analysis toolbox for the acquisition of flower and petal images from cultivated carnation (Dianthus caryophyllus L.) that was validated by a detailed analysis of flower and petal size and shape in 78 commercial cultivars of D. caryophyllus, including 55 standard, 22 spray and 1 pot carnation cultivars. Correlation analyses allowed us to reduce the number of parameters accounting for the observed variation in flower and petal morphology. Convexity was used as a descriptor for the level of serration in flowers and petals. We used a landmark-based approach that allowed us to identify eight main principal components (PCs) accounting for most of the variance observed in petal shape. The effect and the strength of these PCs in standard and spray carnation cultivars are consistent with shared underlying mechanisms involved in the morphological diversification of petals in both subpopulations. Our results also indicate that neighbor-joining trees built with morphological data might infer certain phylogenetic relationships among carnation cultivars. Based on estimated broad-sense heritability values for some flower and petal features, different genetic determinants shall modulate the responses of flower and petal morphology to environmental cues in this species. We believe our image analysis toolbox could allow capturing flower variation in other species of high ornamental value.

  13. Origin of Shear Stability and Compressive Ductility Enhancement of Metallic Glasses by Metal Coating

    Sun, B. A.; Chen, S. H.; Lu, Y. M.; Zhu, Z. G.; Zhao, Y. L.; Yang, Y.; Chan, K. C.; Liu, C. T.

    2016-01-01

    Metallic glasses (MGs) are notorious for the poor macroscopic ductility and to overcome the weakness various intrinsic and extrinsic strategies have been proposed in past decades. Among them, the metal coating is regarded as a flexible and facile approach, yet the physical origin is poorly understood due to the complex nature of shear banding process. Here, we studied the origin of ductile enhancement in the Cu-coating both experimentally and theoretically. By examining serrated shear events and their stability of MGs, we revealed that the thin coating layer plays a key role in stopping the final catastrophic failure of MGs by slowing down shear band dynamics and thus retarding its attainment to a critical instable state. The mechanical analysis on interplay between the coating layer and shear banding process showed the enhanced shear stability mainly comes from the lateral tension of coating layer induced by the surface shear step and the bonding between the coating layer and MGs rather than the layer thickness is found to play a key role in contributing to the shear stability. PMID:27271435

  14. Elevated temperature stress strain behavior of beryllium powder product

    Abeln, S.P.; Field, R.; Mataya, M.C.

    1995-01-01

    Several grades of beryllium powder product were tested under isothermal conditions in compression over a temperature range of room temperature to 1000 C and a strain rate range from 0.001 s -1 to 1 s -1 . Samples were compressed to a total strain of 1 (64% reduction in height). It is shown that all the grades are strain rate sensitive and that strain rate sensitivity increases with temperature. Yield points were exhibited by some grades up to a temperature of 500 C, and appeared to be primarily dependent on prior thermal history which determined the availability of mobile dislocations. Serrated flow in the form of stress drops was seen in all the materials tested and was most pronounced at 500 C. The appearance and magnitude of the stress drops were dependent on accumulated strain, strain rate, sample orientation, and composition. The flow stress and shape of the flow curves differed significantly from grade to grade due to variations in alloy content, the size and distribution of BeO particles, aging precipitates, and grain size. The ductile-brittle transition temperature (DBTT) was determined for each grade of material and shown to be dependent on composition and thermal treatment. Structure/property relationships are discussed using processing history, microscopy (light and transmission), and property data

  15. Morphology and topography of the external male genital organs of spotted paca (Cuniculus paca Linnaeus, 1766

    Márcia Rita Fernandes Machado

    2013-11-01

    Full Text Available Spotted paca (Cuniculus paca is a rodent species from the family Cuniculidae, found in South America, from the Orinoco River Basin to Paraguay. Although widely studied with regard to its morphological and reproductive aspects, still there’re no records on the morphology of the male reproductive system in this species. Thus, this study aimed to evaluate not only the macro and microscopic anatomy of the external genital organs in this species, but also their topography. We studied the external genital organs of 10 adult spotted pacas; 5 specimens, fixed in a 10% aqueous formaldehyde solution, were macroscopically studied and from 5 specimens we collected fragments from the reproductive system, for microscopic analysis. The testicles showed a parenchyma structured in seminiferous tubules and the germinal epithelium rested on its basal membrane. These organs were located in the abdominal cavity, the inguinal path, or within the scrotum. Penis, fibroelastic, was located in the pubic region, in caudal direction. Its glans, coated by keratinized epithelium, were covered by the prepuce and, below this, we identified a slender cartilaginous structure with serrated edges. A couple of bone spurs was located into a bag ventral to the urethra, whose mucosa was lined by transitional epithelium. The epididymal duct was balled up in the head, had a body and tail, and its head was lined by pseudo-stratified stereociliated epithelium, and the tail by simple cubic epithelium; from this, the deferent duct stemmed, lined by columnar stratified epithelium.

  16. Multifunctional cube-like system for biomedical applications featuring 3D printing by dual deposition, scanner, and UV engraving

    Guzmán-González, J. V.; Saldaña-Martínez, M. I.; Barajas-González, O. G.; Guzmán-Ramos, V.; García-Garza, A. K.; Franco-Herrada, M. G.; Selvas Aguilar, R. J.; García-Ramírez, M. A.

    2017-02-01

    In this paper, a cubic-like structure is proposed to scan and print tools used as medical equipment at low cost for developing countries. The structure features a 3-axis frame plane that uses high-precision step motors. An actuator drives the "x and y" axis through serrated bands with 2 mm pitch. Those give an accuracy of 2.5 microns tops. The z-axe is driven by and inductive sensor that allows us to keep the focus to the printing bed as well as to search for non-smooth areas to correct it and deliver an homogeneous impression. The 3D scanner as well as the entire gears are placed underneath in order to save space. As extrude tip, we are using a 445 nm UV laser with 2000 mW of power. The laser system is able to perform several functions such as crystallizing, engraving or cut though a set of mirror arrays. Crystallization occurs when the laser is guided towards the base. This process allows us to direct it towards the polymer injector and as a result, it crystalizes on the spot. Another feature that this system is the engraving process that occurs while the base moves. The movement allows the beam to pass freely towards the base and perform the engraving process.

  17. Grooves to tubes: evolution of the venom delivery system in a Late Triassic "reptile"

    Mitchell, Jonathan S.; Heckert, Andrew B.; Sues, Hans-Dieter

    2010-12-01

    Venom delivery systems occur in a wide range of extant and fossil vertebrates and are primarily based on oral adaptations. Teeth range from unmodified (Komodo dragons) to highly specialized fangs similar to hypodermic needles (protero- and solenoglyphous snakes). Developmental biologists have documented evidence for an infolding pathway of fang evolution, where the groove folds over to create the more derived condition. However, the oldest known members of venomous clades retain the same condition as their extant relatives, resulting in no fossil evidence for the transition. Based on a comparison of previously known specimens with newly discovered teeth from North Carolina, we describe a new species of the Late Triassic archosauriform Uatchitodon and provide detailed analyses that provide evidence for both venom conduction and document a complete structural series from shallow grooves to fully enclosed tubular canals. While known only from teeth, Uatchitodon is highly diagnostic in possessing compound serrations and for having two venom canals on each tooth in the dentition. Further, although not a snake, Uatchitodon sheds light on the evolutionary trajectory of venom delivery systems in amniotes and provide solid evidence for venom conduction in archosaur-line diapsids.

  18. Temporal trends and variability of colonoscopy performance in a gastroenterology practice.

    le Clercq, Chantal M C; Mooi, Rick J; Winkens, Bjorn; Salden, Bouke N H; Bakker, C Minke; van Nunen, Annick B; Keulen, Eric P T; de Ridder, Rogier J; Masclee, Ad A M; Sanduleanu, Silvia

    2016-03-01

    Quality measures for colonoscopy are operator dependent and vary. It is unclear whether quality measures change over time. In this study, time-dependent variation in colonoscopy performance was examined in a gastroenterology practice. Colonoscopy and histopathology records that were collected at three hospitals (one university and two non-university hospitals) over three time periods (2007, 2010, and 2013) were reviewed. Data from colonoscopists performing at least 100 procedures per year were analyzed. Inter-colonoscopist variation in performance (i. e. adjusted cecal intubation rate [aCIR], adenoma detection rate [ADR], advanced ADR, mean adenomas per procedure [MAP], proximal ADR, nonpolypoid ADR, and serrated polyp detection rate) were examined using coefficients of variation. Logistic regression analyses were also performed, adjusting for covariates. A total of 23 colonoscopists performing 6400 procedures were included. Overall, the mean aCIR, ADR, MAP, and proximal ADR improved significantly over time, from 91.9 %, 22.5 %, 0.37, and 10.2 % in 2007 to 95.3 %, 25.8 %, 0.45, and 13.4 %, respectively, in 2013 (P gastroenterology clinical practice. Core quality measures improved over time, mainly through improvement of the lower performers. Measurement of inter-colonoscopist variation in performance helps to identify factors that stimulate or hinder performance, and forms the basis for interventions. http://www.trialregister.nl. © Georg Thieme Verlag KG Stuttgart · New York.

  19. Sonographic and Histological Morphometry of the Uterine Cervix—An Assessment of Laparoscopic and Other lntrafascial Hysterectomy Techniques

    Enrique Lehmann-Willenbrock

    1995-01-01

    Full Text Available New abdominal and vaginal hysterectomy techniques, such as classic intrafascial serrated edged macro-morcellator (SEMM hysterectomy (CISH, by pelviscopy/laparoscopy or laparotomy, and intrafascial vaginal hysterectomy (IVH, are both essentially supravaginal techniques. It has been claimed that they give a prophylaxis against cervical stump carcinoma by coring out the cervix with the SEMM. We set out to answer two questions: 1 How can vaginosonography help to choose an adequate SEMM diameter so that the cervical mucosa and transformation zone are completely removed, and 2 How often do cervical glands remain after the coring out procedure? We were able to show a good correlation between sonographic and histological morphology by giant and serial sections. In 253 CISH operations, resection of both endocervix and transformation zone was complete in 92.9%. Dysplasias were always removed completely; only 18 cervical cores exhibited healthy glands (retention cysts in the resection margin. Therefore, CISH procedures should be able to prevent most of the cervical stump carcinomata that follow traditional supravaginal hysterectomy, but only long-term follow-up will give the final proof.

  20. Laparoscopic and Other Intrafascial Hysterectomy Techniques or Mucosal Ablation—A Choice for Maximum Organ Conservation

    Kurt Semm

    1995-01-01

    Full Text Available The operative methods of total uterine mucosal ablation (TUMA as well as new abdominal and vaginal hysterectomy techniques are described. Classic intrafascial serrated edged macro-morcellator (SEMM hysterectomy (CISH by pelviscopy or laparotomy and intrafascial vaginal hysterectomy (IVH are techniques that allow the nerve and the blood supply of the pelvic floor to remain intact, mainly because only the ascending branches of the uterine arteries are ligated. TUMA avoids the removal of the uterus altogether and is reserved for hypermenorrhea or menorrhagia without major enlargement of the uterus. Both CISH and IVH reduce the physical trauma of hysterectomy considerably and have the advantages of the supravaginal technique. Prophylaxis against cervical stump carcinoma is assured by coring out the cervix with the SEMM. In patients in whom both procedures are possible, IVH is preferred because it combines the minimal trauma and short operative time of vaginal hysterectomy. The decreased diameter of the cervix after coring out greatly simplifies this type of vaginal hysterectomy, the technique that has always been favored because of its short operative times and minimal trauma.

  1. Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic-martensitic steel

    Vanaja, J., E-mail: jvanaja4@gmail.com [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Laha, K. [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Sam, Shiju [Institute for Plasma Research, Gandhinagar, Gujarat (India); Nandagopal, M.; Panneer Selvi, S.; Mathew, M.D.; Jayakumar, T. [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Rajendra Kumar, E. [Institute for Plasma Research, Gandhinagar, Gujarat (India)

    2012-05-15

    Tensile strength and flow behaviour of a Reduced Activation Ferritic-Martensitic (RAFM) steel (9Cr-1W-0.06Ta-0.22V-0.08C) have been investigated over a temperature range of 300-873 K at different strain rates. Tensile strength of the steel decreased with temperature and increased with strain rate except at intermediate temperatures. Negative strain rate sensitivity of flow stress of the steel at intermediate temperatures revealed the occurrence of dynamic strain ageing in the steel, even though no serrated flow was observed. The tensile flow behaviour of the material was well represented by the Voce strain hardening equation for all the test conditions. Temperature and strain rate dependence of the various parameters of Voce equation were interpreted with the possible deformation mechanisms. The equivalence between the saturation stress at a given strain rate in tensile test and steady state deformation rate at a given stress in creep test was found to be satisfied by the RAFM steel.

  2. Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic-martensitic steel

    Vanaja, J.; Laha, K.; Sam, Shiju; Nandagopal, M.; Panneer Selvi, S.; Mathew, M. D.; Jayakumar, T.; Rajendra Kumar, E.

    2012-05-01

    Tensile strength and flow behaviour of a Reduced Activation Ferritic-Martensitic (RAFM) steel (9Cr-1W-0.06Ta-0.22V-0.08C) have been investigated over a temperature range of 300-873 K at different strain rates. Tensile strength of the steel decreased with temperature and increased with strain rate except at intermediate temperatures. Negative strain rate sensitivity of flow stress of the steel at intermediate temperatures revealed the occurrence of dynamic strain ageing in the steel, even though no serrated flow was observed. The tensile flow behaviour of the material was well represented by the Voce strain hardening equation for all the test conditions. Temperature and strain rate dependence of the various parameters of Voce equation were interpreted with the possible deformation mechanisms. The equivalence between the saturation stress at a given strain rate in tensile test and steady state deformation rate at a given stress in creep test was found to be satisfied by the RAFM steel.

  3. Radiotherapy of esophageal cancer. Clinical usefulness of new grouping

    Hishinuma, Tamio

    1997-01-01

    A total of 188 cases of nonresected esophageal cancer were categorized into the following groups based on T category (1987 UICC) and radiological classification (Japanese Society of Esophageal Diseases): Group 1: superficial or early (T2 or less) tumorous type; Group 2: advanced tumorous type, early serrated or early spiral type; Group 3: others. The response to radiotherapy was significantly related to the group. According to the proportional hazard model, the important factors predicting long-term survival were T category, radiotherapy response at the end of treatment, and group. There was a tendency to obtain better local control in group 1 patients than in group 2 patients, but cause-specific survival was the same for both groups (mainly the appearance of distant metastases). Local control was poor in group 3. If the tumor response at 40 Gy was excellent in group 2 patients, the main cause of death was distant metastases, much the same as in group 1 patients. However, if response at 40 Gy was not excellent, the main cause of death was local failure even though final tumor response was excellent. It seemed that therapy that may improve local control is valuable for group 3 patient, and for group 2 patients whose tumor response at 40 Gy was not excellent. (author)

  4. Experimental investigation on hard turning using mixed ceramic insert under accelerated cooling environment

    Ramanuj Kumar

    2018-05-01

    Full Text Available The present study reports on the application of accelerated cooling environment (ACE in hard turning of AISI D2 steel (55 ± 1HRC using mixed ceramic insert (Al2O3 + TiCN which is rarely being investigated and to address the major problems of brittle fracture of tool tip that arises through cutting forces and friction at tool-work and chip-tool interface. In spraying process, some portion of spraying coolant vaporize due to heat when it reaches to cutting zone where as remaining portion of coolant easily penetrate in cutting zone through capillary action and reduces friction as well as heat in cutting zone. Abrasion and chipping are noticed to be dominant wear mechanism. Cutting speed and depth of cut are significant for flank wear as well as cutting temperature whereas feed is significant for average surface roughness. Serrated chips have been identified at higher cutting speed and higher feeds. Optimal parametric combination is found to be d1-f1-v2 (0.1mm-0.04 m/min-108 m/min and tool life and machining cost per part are 70 minutes and Rs 76.76 respectively. Investigation shows the worthy of application of ACE in hard turning in industrial sectors ecologically and economically. Empirical models reveal statistically significance due to higher coefficient of correlations.

  5. Waves in man-made materials: superlattice to metamaterials

    Tsu, Raphael; Fiddy, Michael A.

    2014-07-01

    While artificial or man-made structures date back to Lord Rayleigh, the work started by Lewin in 1947, placing spheres onto cubic lattices, greatly enriched microwave materials and devices. It was very suggestive of both metamaterials and photonics crystals. Effective medium models were used to describe bulk properties with some success. The concept of metamaterials followed photonic crystals, and these both were introduced after the introduction of the man-made superlattices designed to enrich the class of materials for electronic devices. The work on serrated ridged waveguides by Kirschbaum and Tsu for the control of the refractive index of microwave lenses as well as microwave matching devices in 1959 used a combination of theory, such as Floquet's theory, Bloch theory in one dimension, as well as periodic lumped loading. There is much in common between metamaterials and superlattices, but in this paper, we discuss some practical limitations to both. It is pointed out that unlike superlattices where kl > 1 is the most important criterion, metamaterials try to avoid involve such restrictions. However, the natural random fluctuations that limit the properties of naturally occurring materials are shown to take a toll on the theoretical predictions of metamaterials. The question is how great that toll, i.e. how significant those fluctuations will be, in diminishing the unusual properties that metamaterials can exhibit.

  6. A new species of Nuuanu (Amphipoda: Gammaridea: Melitidae from shallow sandy bottoms of the Balearic Islands (W Mediterranean

    Damià Jaume

    2006-12-01

    Full Text Available Nuuanu beatricis n. sp., a new melitid amphipod, is described from shallow-water sandy bottoms on the S and SE coasts of Mallorca (Balearic Islands, Mediterranean. It differs from the rest of its congeners in the combination of: (1 non-geniculate antennule, much longer than antenna; (2 distal segment of mandibular palp shorter than second, armed with both D and E setae; (3 second segment of mandibular palp with 2 setae; (4 posteroventral lobe (sensu Lowry and Watson, 2002 absent from posterior margin of coxa 4; (5 reduced spine present on medial surface of coxa 5; (6 posterior margin of basis of pereopod 5 convex; (7 anterodistal lobe of coxa 7 wanting; (8 posterior margin of basis of pereopod 7 sparsely serrated along proximal half only; (9 pleonites 1-2 lacking dorsodistal spines; (10 anterodistal corner of epimeral plate 1 rounded; (11 exopod of uropod 3 longer than protopod; and (12 telson with terminal spine on each lobe. Although the new amphipod could be an alien species introduced from a distant tropical location with alien Caulerpa algae species, it is here regarded as an ancient Mediterranean element owing to its peracarid condition (i.e. reduced potential for dispersal, regressed visual apparatus, and crevicular-interstitial existence. The presumed presence of sternal gills in Nuuanu is rejected after demonstration of the coxal origin of the spiniform structures interpreted elsewhere as sternal gills.

  7. Fungal lectin of Peltigera canina induces chemotropism of compatible Nostoc cells by constriction-relaxation pulses of cyanobiont cytoskeleton.

    Díaz, Eva Maria; Vicente-Manzanares, Miguel; Sacristan, Mara; Vicente, Carlos; Legaz, Maria-Estrella

    2011-10-01

    A glycosylated arginase acting as a fungal lectin from Peltigera canina is able to produce recruitment of cyanobiont Nostoc cells and their adhesion to the hyphal surface. This implies that the cyanobiont would develop organelles to motility towards the chemoattractant. However when visualized by transmission electron microscopy, Nostoc cells recently isolated from P. canina thallus do not reveal any motile, superficial organelles, although their surface was covered by small spindles and serrated layer related to gliding. The use of S-(3,4-dichlorobenzyl)isothiourea, blebbistatin, phalloidin and latrunculin A provide circumstantial evidence that actin microfilaments rather than MreB, the actin-like protein from prokaryota, and, probably, an ATPase which develops contractile function similar to that of myosin II, are involved in cell motility. These experimental facts, the absence of superficial elements (fimbriae, pili or flagellum) related to cell movement, and the appearance of sunken cells during of after movement verified by scanning electron microscopy, support the hypothesis that the motility of lichen cyanobionts could be achieved by contraction-relaxation episodes of the cytoskeleton induced by fungal lectin act as a chemoattractant.

  8. Wall-slip effects in SnAgCu solder pastes used in electronics assembly applications

    Mallik, S.; Ekere, N.N.; Durairaj, R.; Marks, A.E.; Seman, A.

    2009-01-01

    Solder paste is the most important strategic bonding material used in the assembly of surface mount components in electronics manufacturing. As the trend towards miniaturisation of electronic products continues, there is an increasing demand for better understanding of the flow and deformation that is, the rheological behaviour of solder paste formulations. Wall slip plays an important role in characterising the flow behaviour of solder paste materials. The problem of wall slip arises due to the various attractive and repulsive forces acting between the solder particles and the walls of the measuring geometry. These interactions could lead to the presence of a thin solvent layer adjacent to the wall, which gives rise to slippage. In rheological measurements, slip effects can generally be avoided by using roughened surfaces for measuring geometries. In this paper, a novel technique is developed to study the effect of wall slip in the rheological measurements of lead-free solder paste. The viscosity and oscillatory data obtained for three different solder paste samples (from measuring geometries of different surface roughness) have been analysed and compared. In viscosity measurements, slip effects were dominant at low shear rates and the use of serrated surfaces was found to be quite effective in minimizing slip effects. Oscillatory measurements were also affected by roughening the surfaces of measuring geometries.

  9. Construction of cryogenic testing system and tensile deformation behavior of AISI 300 series stainless steels at cryogenic temperatures

    Lee, H.M.; Nahm, S.H.; Huh, Y.H.; Lee, J.J.; Bahng, G.W.

    1990-01-01

    For practical application of cryogenic engineering, development and characterization of structural materials for use at low temperatures are essential. For these purposes, a system for mechanical testing at liquid helium temperatures was developed and it was shown that the precision and accuracy of the system met the requirements of standards for materials testing machines. Using this system, tensile deformation behavior of AISI 304,316 and 310S austenitic stainless steels at cryogenic temperatures was investigated. Tests were conducted on round, tensile specimens having a 6.25mm diameter at 4,77, and 295 K and loading rate was 0.5mm/min. Serrations were observed in all alloys at 4 K. The stress-displacement curves at 77 and 4 K showed different tendency from those at 298 K. As the testing temperature decreased, ultimate strengths of 304 and 316 were largely increased compared to the increase of yield strengths, but the increase of ultimate strength of 310S was almost the same to that of yield strength. Type 310S had the highest yield strength and the lowest tensile strength at all temperatutes. These tensile characteristics were considered to be strongly affected by austenite stability.(Author)

  10. Redescription of the poorly known planktonic copepod Pontellopsis lubbockii (Giesbrecht, 1889) (Pontellidae) from the Eastern Tropical Pacific with a key to species

    Suárez-Morales, Eduardo; Kozak, Eva

    2012-01-01

    Abstract During a survey of the epipelagic zooplankton carried out off the coast of the Mexican states of Jalisco and Colima, in the Eastern Tropical Pacific, female and male specimens of the poorly known calanoid copepod Pontellopsis lubbockii (Giesbrecht, 1889) were collected. Because previous descriptions and illustrations are largely incomplete and have caused some taxonomical confusion, this species is fully redescribed from specimens from the Mexican Pacific. The species has some characters that have been overlooked, but those related to the female genital double-somite are the most striking, it has two conical dorsal protuberances and a long ventral spiniform process unique of this species. The mouthparts of this species have not been hitherto described and figured, the flexible terminal setae of legs 3 and 4 is noteworthy. The male general morphology agrees in general with previous data, but new details of the leg 5 and geniculate antennule are added. Its mouthparts, with strong, serrate setae on the maxillae and maxillules, and a strong mandibular edge, suggest that this is a predator form. A dichotomous key for the identification of males and females of the species of Pontellopsis known from the Eastern Tropical Pacific is included. PMID:23372406

  11. Tensile properties of commercially pure vanadium from room temperature to 1200 degree C

    Henshall, G.A.; Torres, S.G.

    1993-12-01

    The tensile properties of vanadium are sensitive to interstitial impurity content, on grain size and strain rate. Thus, it is problematic to use published tensile data for materials potentially varying in these quantities. This investigation was undertaken to fully characterize the tensile properties of the commercially pure vanadium used at Lawrence Livermore. Both sheet and rod stock were tested in vacuum from ambient temperature to 1200C at strain rates 6.67 x 10 -5 to 6.67 x 10 -2 s -1 . The results of these experiments show that vanadium behaves in a manner typical of many bcc metals containing interstitial impurities. Local peaks in yield stress and ultimate tensile stress vs temperature curves are observed at intermediate temperatures. Serrated yielding also is observed in some temperature ranges. Changes in strain rate within the quasi-static regime have a relatively small, predictable effect. The rod and sheet stock have similar properties, except that the lower yield stress of the rod is less than that of the sheet over most of the temperature range studied. No plateau in yield strength vs temperature curve was observed for the rod. In both forms, and for all temperatures, vanadium is ductile. The elongation to failure reaches a minimum of approximately 35% at a temperature of 500C and a maximum of approximately 140% at 1200C

  12. Spontaneous polyploidization in cucumber.

    Ramírez-Madera, Axel O; Miller, Nathan D; Spalding, Edgar P; Weng, Yiqun; Havey, Michael J

    2017-07-01

    This is the first quantitative estimation of spontaneous polyploidy in cucumber and we detected 2.2% polyploids in a greenhouse study. We provide evidence that polyploidization is consistent with endoreduplication and is an on-going process during plant growth. Cucumber occasionally produces polyploid plants, which are problematic for growers because these plants produce misshaped fruits with non-viable seeds. In this study, we undertook the first quantitative study to estimate the relative frequency of spontaneous polyploids in cucumber. Seeds of recombinant inbred lines were produced in different environments, plants were grown in the field and greenhouse, and flow cytometry was used to establish ploidies. From 1422 greenhouse-grown plants, the overall relative frequency of spontaneous polyploidy was 2.2%. Plants possessed nuclei of different ploidies in the same leaves (mosaic) and on different parts of the same plant (chimeric). Our results provide evidence of endoreduplication and polysomaty in cucumber, and that it is an on-going and dynamic process. There was a significant effect (p = 0.018) of seed production environment on the occurrence of polyploid plants. Seed and seedling traits were not accurate predictors of eventual polyploids, and we recommend that cucumber producers rogue plants based on stature and leaf serration to remove potential polyploids.

  13. Cáncer de colon, secuencia adenoma carcinoma y pólipo aserrado

    MSc. Juan Carlos Calderón Reza

    2018-02-01

    Full Text Available Los pólipos adenomatosos son muy frecuentes y presentan gran potencial de malignización. De entre ellos el velloso es el de mayor potencial maligno, pero todos los tipos histológicos presentan componente velloso en mayor o menor proporción, por lo que todos se pueden considerar premalignos, este proceso degenerativo conocido como secuencia adenoma carcinoma explicó efectivamente un 85 % de los cánceres colorrectales por décadas. Hoy en día gracias a los avances tecnológicos, se conoce que no todos los cánceres colorrectales presentan la mencionada secuencia, el 10 a 15% restantes, están incluidos dentro del denominado “Serrated neoplasia pathway” cuya característica es la inestabilidad de micro satélites, caracterizada por la inactivación de los genes reparadores del ADN por cambios epigenéticos como la hipermetilación del promotor del gen MLH1 observado en el Síndrome de Lynch

  14. 3D digital image correlation investigation of PLC effect in a new Ni-Co base superalloy

    Gao, Y.; Fu, S. H.; Cheng, T.; Huo, X.; Zhang, Q. C.

    2013-06-01

    Repeated plastic instability accompanying serrated yielding in stress-strain curves and localization of deformation is observed during plastic deformation of many metallic alloys when tensile specimens are deformed under certain experimental conditions of temperature, strain rate, and pre-deformation. This phenomenon is referred to as the Portevin- Le Chatelier (PLC) effect. TMW alloy, a newly developed Ni-Co base superalloy for aircraft engine application, also exhibit PLC effect during tensile test at temperatures ranging from 300 ° to 600 °, which are also the temperature range for engine working. In this paper, a 3D digital image correlation (3D DIC) measurement system was established to observe the localization of deformation (PLC band) in a tensile test performed on TMW alloy specimen at temperature of 400 °. The 3D DIC system, with displacement measurement accuracy up to 0.01 pixels and strain measurement accuracy up to 100 μɛ, has a high performance in displacement field calculation with more than 10000 points every second on a 3.1G Hz CPU computer. The test result shows that, the PLC bands are inclined at an angle of about 60° to the tensile axis. Unlike tensile test performed on aluminums alloy, the widths of PLC bands of TMW alloy specimen, ranging from 4 mm to 4.5 mm, are much greater than the specimen thickness (0.25 mm).

  15. A new genus and species of Neotropical Nemobiinae (Insecta: Orthoptera: Grylloidea: Trigonidiidae: Nemobiinae).

    Jesus, Fabiene Maria DE; Pereira, Marcelo Ribeiro; Rodrigues, Geanne Carla Ripani; Sperber, Carlos Frankl

    2017-06-09

    A new genus and a new species of Neotropical cricket is described: Pepoapua cariacica n. gen., n. sp., occurring in four Atlantic Forest remnants in the states of Bahia and Espírito Santo, Brazil. This new genus is morphologically similar in external characteristics, both male and female genitalia, with two other Neotropical genera of Nemobiinae: Amanayara and Kevanemobius. The combination of the external morphological characteristics, along with male genitalia, characterize a new genus through combination of the following characters: (i) males and females with morphologically similar tegmina; (ii) tegmina reduced, not reaching half of the second abdominal segment; (iii) dorsal field of the tegmina with parallel veins, without stridulatory vein or any specialized area for sound production; (iv) tibia of the first pair of legs without tympanum; (v) tibia of the third pair of legs with seven dorsal spurs, four inner and three outer, the proximo-dorsal inner spur reduced in size and the disto-dorsal inner spur without glandular aspect; (vi) ovipositor with distal portion of the dorsal and ventral valves serrated; (vii) male genitalia without evident bristles or sensillas; (viii) pseudepiphallic median lobe presenting apical and ventral projections.

  16. Influence of various doses of gamma irradiation on the germination and growth of mango (mangifera indica lin) stones

    Hafiz, I.A.; Malik, F.A.; Ahmad, S.; Asi, A.A.; Khan, M.

    2004-01-01

    Mango stones of the cultivar, Dusehri were administered the Gamma irradiation sourced from cobalt-60 with the doses of 0, 2.5, 5.0, 7.5, 10.00, 12.50 and 15.00 Krd. The results had revealed that the germination percentage was significantly different amongst the treatments, which was slightly improved at 2.5 Krd with the value of 87. 5 %, compared with control (70.25 %), but this pattern showed the reduced trend at higher levels of radiation doses. Germination percentage had geared the negative trend beyond the dose of 2. 5 Krd. Inhibitory effects of radiation were observed pertinent to the average height of seedlings. However, primary leaves appeared serrated in the seedlings emerged from the treated seeds, which turned normal in the subsequent growth of flushes. A new characteristic of lateral branching instead of keeping a single stem was exhibited in the seedlings derived from the treated seeds. The induction of the trait may be used to alter the structure/framework/pattern of the tree canopy. (author)

  17. Rheological Properties of Very High-Strength Portland Cement Pastes: Influence of Very Effective Superplasticizers

    Adriano Papo

    2010-01-01

    Full Text Available The influence of the addition of very effective superplasticizers, that are commercially available, employed for maximising the solid loading of very high-strength Portland cement pastes, has been investigated. Cement pastes were prepared from deionized water and a commercially manufactured Portland cement (Ultracem 52.5 R. Cement and water were mixed with a vane stirrer according to ASTM Standard C305. The 0.38 to 0.44 water/cement ratio range was investigated. Three commercial superplasticizing agents produced by Ruredil S.p.a. were used. They are based on a melamine resin (Fluiment 33 M, on a modified lignosulphonate (Concretan 200 L, and on a modified polyacrylate (Ergomix 1000. Rheological tests were performed at 25°C by using the rate controlled coaxial cylinder viscometer Rotovisko-Haake 20, system M5-osc., measuring device MV2P with serrated surfaces. The tests were carried out under continuous flow conditions. The results of this study were compared with those obtained in a previous article for an ordinary Portland cement paste.

  18. The informative value of radionative diagnostics in cases of patellar chondropathy

    Gloeckler, T.W.

    1979-01-01

    The present study of 64 patients analyzes the diagnosticability of patellar chondropathy on the basis of X-ray native images. The results were confirmed intraoperatively or arthroscopically. We evaluated images of both knees in a.p. and lateral projection and walking images with 30, 60, and 90 0 of joint bending. In all cases of chondropathy of third degree, radiomorphologic changes could be delineated; in stage I this was possible in 66% of the cases. The summarizing assessment of structural irregularities as discontinued contours of the subchondral osseous lamella, spot-like or diffuse demineralisation, osteophyteous peripheral serration, disintegration in the insertion area of the quadriceps tendo, soft-tissue swelling and hemarthrosis is significant for establishing the diagnosis. Whereas there is a causal relationship between defective axial positions of the patella or particularly posttraumatic defect and the development of a chrondropathy, we could not detect in the investigated patient-group a significantly higher incidence of chondropathy in cases of dysplasia of the patella or of the femoral condyles. A simple scheme - applicable in arthroscopy and radiology - is introduced: it shall help to record chondromalacious regions and considers the most frequently affected areas. (orig.) [de

  19. GDP-L-fucose is required for boundary definition in plants.

    Gonçalves, Beatriz; Maugarny-Calès, Aude; Adroher, Bernard; Cortizo, Millán; Borrega, Nero; Blein, Thomas; Hasson, Alice; Gineau, Emilie; Mouille, Grégory; Laufs, Patrick; Arnaud, Nicolas

    2017-12-16

    The CUP-SHAPED COTYLEDON (CUC) transcription factors control plant boundary formation, thus allowing the emergence of novel growth axes. While the developmental roles of the CUC genes in different organs and across species are well characterized, upstream and downstream events that contribute to their function are still poorly understood. To identify new players in this network, we performed a suppressor screen of CUC2g-m4, a line overexpressing CUC2 that has highly serrated leaves. We identified a mutation that simplifies leaf shape and affects MURUS1 (MUR1), which is responsible for GDP-L-fucose production. Using detailed morphometric analysis, we show that GDP-L-fucose has an essential role in leaf shape acquisition by sustaining differential growth at the leaf margins. Accordingly, reduced CUC2 expression levels are observed in mur1 leaves. Furthermore, genetic analyses reveal a conserved role for GDP-L-fucose in different developmental contexts where it contributes to organ separation in the same pathway as CUC2. Taken together, our results reveal that GDP-L-fucose is necessary for proper establishment of boundary domains in various developmental contexts. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  20. Mechanisms and FEM Simulation of Chip Formation in Orthogonal Cutting In-Situ TiB2/7050Al MMC

    Wang, Wenhu; Jiang, Ruisong; Lin, Kunyang; Shao, Mingwei

    2018-01-01

    The in-situ TiB2/7050Al composite is a new kind of Al-based metal matrix composite (MMC) with super properties, such as low density, improved strength, and wear resistance. This paper, for a deep insight into its cutting performance, involves a study of the chip formation process and finite element simulation during orthogonal cutting in-situ TiB2/7050Al MMC. With chips, material properties, cutting forces, and tool geometry parameters, the Johnson–Cook (J–C) constitutive equation of in-situ TiB2/7050Al composite was established. Then, the cutting simulation model was established by applying the Abaqus–Explicit method, and the serrated chip, shear plane, strain rate, and temperature were analyzed. The experimental and simulation results showed that the obtained material’s constitutive equation was of high reliability, and the saw-tooth chips occurred commonly under either low or high cutting speed and small or large feed rate. From result analysis, it was found that the mechanisms of chip formation included plastic deformation, adiabatic shear, shearing slip, and crack extension. In addition, it was found that the existence of small, hard particles reduced the ductility of the MMC and resulted in segmental chips. PMID:29662047

  1. Mechanisms and FEM Simulation of Chip Formation in Orthogonal Cutting In-Situ TiB₂/7050Al MMC.

    Xiong, Yifeng; Wang, Wenhu; Jiang, Ruisong; Lin, Kunyang; Shao, Mingwei

    2018-04-15

    The in-situ TiB₂/7050Al composite is a new kind of Al-based metal matrix composite (MMC) with super properties, such as low density, improved strength, and wear resistance. This paper, for a deep insight into its cutting performance, involves a study of the chip formation process and finite element simulation during orthogonal cutting in-situ TiB₂/7050Al MMC. With chips, material properties, cutting forces, and tool geometry parameters, the Johnson-Cook (J-C) constitutive equation of in-situ TiB₂/7050Al composite was established. Then, the cutting simulation model was established by applying the Abaqus-Explicit method, and the serrated chip, shear plane, strain rate, and temperature were analyzed. The experimental and simulation results showed that the obtained material's constitutive equation was of high reliability, and the saw-tooth chips occurred commonly under either low or high cutting speed and small or large feed rate. From result analysis, it was found that the mechanisms of chip formation included plastic deformation, adiabatic shear, shearing slip, and crack extension. In addition, it was found that the existence of small, hard particles reduced the ductility of the MMC and resulted in segmental chips.

  2. Maeridae from the Indo-Pacific: Elasmopus, Leeuwinella gen. nov., Maeropsis, Pseudelasmopus and Quadrimaera (Amphipoda: Crustacea).

    Hughes, Lauren E

    2015-12-22

    Twenty-two species of Maeridae including the new genus, Leeuwinella, and eight new species are described from Indo-Pacific waters. Leeuwinella mistakensis gen. et sp. nov. from southern Western Australia has dorsal carinae and serrate epimeral margins on pleonites 1-3 and mandibular palp article 3 concave; this significant combination of characters justifies erection of a new genus. Elasmopus coxacallus sp. nov., with a castelloserrate posterior margin of pereopod 7 presents a novel character for the genus, which contains over 100 described species. Elasmopus incomptus sp. nov. and E. norfolkensis sp. nov. are also described from Norfolk Island, South Pacific, while new distribution records are provided for E. gracilis Schellenberg, 1938, E. integer Myers, 1989, and E. molokai J.L. Barnard, 1970 from northwestern Australia, and E. souillacensis Appadoo & Myers, 2003, from the Kermadec Islands. New distribution records for Maeropsis griffini (Berents, 1983) from Bedout Island in Western Australia are the first of the species outside the Queensland type locality and new records of M. thetis (Lowry & Springthorpe, 2005) from mainland Australia to Tasmania and across the Tasman Sea extending its range. Pseudelasmopus walkerae sp. nov. is described from Norfolk Island, and is the second species recorded in the genus, previously known only from Mauritius. Lastly, three new Quadrimaera species, Q. gregoryi, Q. brownorum and Q. vallaris, along with eight known Quadrimaera species, are reported from various locations extending their distributions in the Indo-Pacific.

  3. Tool Wear Analysis on Five-Axis Flank Milling for Curved Shape Part – Full Flute and Ground Shank End Mill

    Syahrul Azwan Sundi

    2017-01-01

    Full Text Available This paper is a study on full flute (extra-long tool and ground shank end mill wear analysis by utilizing five-axis CNC to implement flank milling strategy on curved shape part. Five-axis machining eases the user to implement variations of strategy such as flank milling. Flank milling is different from point milling. Point milling cuts materials by using the tip of the tool whereas the flank milling uses the cutting tool body to cut material. The type of cutting tool used was end mill 10 mm diameter with High Speed Steel (HSS material. One factor at a time was utilized to analyze the overall data. Feed rate and spindle speed were the two main factors that been set up equally for both full flute and ground shank end mill. At the end of this research, the qualitative analysis based on tool wear between full flute and ground shank end mill is observed. Generally, both types of cutting tools showed almost the same failure indication such as broken edge or chipped off edge, formation of pinned hole on the surface and serration formation or built-up edge (BUE on the primary flute. However, the results obtained from the enlarged images which were captured by Optical Microscope indicated that, the ground shank end mill is better than the full flute end mill.

  4. Notching on cancer’s door: Notch signaling in brain tumors

    Marcin eTeodorczyk

    2015-01-01

    Full Text Available Notch receptors play an essential role in the regulation of central cellular processes during embryonic and postnatal development. The mammalian genome encodes for four Notch paralogs (Notch 1-4, which are activated by three Delta-like (Dll1/3/4 and two Serrate-like (Jagged1/2 ligands. Further, non-canonical Notch ligands such as EGFL7 have been identified and serve mostly as antagonists of Notch signaling. The Notch pathway prevents neuronal differentiation in the central nervous system by driving neural stem cell maintenance and commitment of neural progenitor cells into the glial lineage. Notch is therefore often implicated in the development of brain tumors, as tumor cells share various characteristics with neural stem and progenitor cells. Notch receptors are overexpressed in gliomas and their oncogenicity has been confirmed by gain- and loss-of-function studies in vitro and in vivo. To this end, special attention is paid to the impact of Notch signaling on stem-like brain tumor-propagating cells as these cells contribute to growth, survival, invasion and recurrence of brain tumors. Based on the outcome of ongoing studies in vivo, Notch-directed therapies such as γ secretase inhibitors and blocking antibodies have entered and completed various clinical trials. This review summarizes the current knowledge on Notch signaling in brain tumor formation and therapy.

  5. Cooling γ precipitation behavior and strengthening in powder metallurgy superalloy FGH4096

    TIAN Gaofeng; JIA Chengchang; WEN Yin; LIU Guoquan; HU Benfu

    2008-01-01

    Two cooling schemes (continuous cooling and interrupted cooling tests) were applied to investigate the cooling γ precipitation behavior in powder metallurgy superalloy FGH4096.The effect of cooling rate on cooling γ precipitation and the development of γ precipitates during cooling process were involved in this study.The ultimate tensile strength (UTS) of the specimens in various cooling circumstances was tested.The experiential equations were obtained between the average sizes of secondary and tertiary γ precipitates,the strength,and cooling rate.The results show that they are inversely correlated with the cooling rate as well as the grain boundary changes from serrated to straight,the shape of secondary γ precipitates changes from irregular cuboidal to spherical,while the formed tertiary γ precipitates are always spherical.The interrupted cooling tests show that the average size of secondary γ precipitates increases as a linear function of interrupt temperature for a fixed cooling rate of 24℃/min.The strength first decreases and then increases against interrupt temperature,which is fundamentally caused by the multistage nucleation of γ precipitates during cooling process.

  6. Machinability evaluation of titanium alloys.

    Kikuchi, Masafumi; Okuno, Osamu

    2004-03-01

    In the present study, the machinability of titanium, Ti-6Al-4V, Ti-6A1-7Nb, and free-cutting brass was evaluated using a milling machine. The metals were slotted with square end mills under four cutting conditions. The cutting force and the rotational speed of the spindle were measured. The cutting forces for Ti-6Al-4V and Ti-6Al-7Nb were higher and that for brass was lower than that for titanium. The rotational speed of the spindle was barely affected by cutting. The cross sections of the Ti-6Al-4V and Ti-6Al-7Nb chips were more clearly serrated than those of titanium, which is an indication of difficult-to-cut metals. There was no marked difference in the surface roughness of the cut surfaces among the metals. Cutting force and the appearance of the metal chips were found to be useful as indices of machinability and will aid in the development of new alloys for dental CAD/CAM and the selection of suitable machining conditions.

  7. Shark-Cetacean trophic interaction, Duinefontein, Koeberg, (5 Ma, South Africa

    Romala Govender

    2015-11-01

    Full Text Available This study forms part of a larger project to reconstruct the Mio-Pliocene marine palaeoenvironment along South Africa’s west coast. It documents the shark–cetacean trophic interaction during the Zanclean (5 Ma at Duinefontein (Koeberg. The damage described on the fragmentary cetacean bones was compared with similar damage observed on fossils from Langebaanweg, a Mio-Pliocene site on the west coast of South Africa, and data present in the literature. This comparison showed that the damage was the result of shark bites. The state of preservation makes it difficult to determine if the shark bite marks were the cause of death or as a result of scavenging. The presence of the bite marks on the bone would, however, indicate some degree of skeletonisation. Bite marks on some cranial fragments would suggest that the cetacean’s body was in an inverted position typical of a floating carcass. The preservation of the material suggests that the bones were exposed to wave action resulting in their fragmentation as well as abrasion, polishing and rolling. It also suggests that the cetacean skeletons were exposed for a long time prior to burial. The morphology of the bites suggests that the damage was inflicted by sharks with serrated and unserrated teeth. Shark teeth collected from the deposit include megalodon (Carcharodon megalodon, white (Carcharodon carcharias as well as mako (Isurus sp. and Cosmopolitodus hastalis sharks, making these sharks the most likely predators/scavengers.

  8. Effects of Temperature and Strain Rate on Tensile Deformation Behavior of 9Cr-0.5Mo-1.8W-VNb Ferritic Heat-Resistant Steel

    Guo, Xiaofeng; Weng, Xiaoxiang; Jiang, Yong; Gong, Jianming

    2017-09-01

    A series of uniaxial tensile tests were carried out at different strain rate and different temperatures to investigate the effects of temperature and strain rate on tensile deformation behavior of P92 steel. In the temperature range of 30-700 °C, the variations of flow stress, average work-hardening rate, tensile strength and ductility with temperature all show three temperature regimes. At intermediate temperature, the material exhibited the serrated flow behavior, the peak in flow stress, the maximum in average work-hardening rate, and the abnormal variations in tensile strength and ductility indicates the occurrence of DSA, whereas the sharp decrease in flow stress, average work-hardening rate as well as strength values, and the remarkable increase in ductility values with increasing temperature from 450 to 700 °C imply that dynamic recovery plays a dominant role in this regime. Additionally, for the temperature ranging from 550 to 650 °C, a significant decrease in flow stress values is observed with decreasing in strain rate. This phenomenon suggests the strain rate has a strong influence on flow stress. Based on the experimental results above, an Arrhenius-type constitutive equation is proposed to predict the flow stress.

  9. Temperature and time variations during osteotomies performed with different piezosurgical devices: an in vitro study.

    Delgado-Ruiz, R A; Sacks, D; Palermo, A; Calvo-Guirado, J L; Perez-Albacete, C; Romanos, G E

    2016-09-01

    The aim of this experimental in vitro study was to evaluate the effects of the piezoelectric device in temperature and time variations in standardized osteotomies performed with similar tip inserts in bovine bone blocks. Two different piezosurgical devices were used the OE-F15(®) (Osada Inc., Los Angeles, California, USA) and the Surgybone(®) (Silfradent Inc., Sofia, Forli Cesena, Italy). Serrated inserts with similar geometry were coupled with each device (ST94 insert/test A and P0700 insert/test B). Osteotomies 10 mm long and 3 mm deep were performed in bone blocks resembling type II (dense) and type IV (soft) bone densities with and without irrigation. Thermal changes and time variations were recorded. The effects of bone density, irrigation, and device on temperature changes and time necessary to accomplish the osteotomies were analyzed. Thermal analysis showed significant higher temperatures during piezosurgery osteotomies in hard bone without irrigation (P  0.05). Time analysis showed that the mean time values necessary to perform osteotomies were shorter in soft bone than in dense bone (P piezosurgery osteotomies in dense bone without irrigation; the time to perform the osteotomy with piezosurgery is shorter in soft bone compared to hard bone; and the piezosurgical device have a minimal influence in the temperature and time variations when a similar tip design is used during piezosurgery osteotomies. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Phase stability of high manganese austenitic steels for cryogenic applications

    Couturier, K

    2000-01-01

    The aim of this work is to study the austenitic stability against a' martensitic transformation of three non-magnetic austenitic steels : a new stainless steel X2CrMnNiMoN 19-12-11-1 grade, a traditional X8CrMnNiN 19-11-6 grade and a high manganese X8MnCrNi 28-7-1 grade. Measurements of relative magnetic susceptibility at room temperature are performed on strained tensile specimens at 4.2 K. A special extensometer for high precision strain measurements at low temperature has been developed at CERN to test specimens up to various levels of plastic strain. Moreover, the high precision strain recording of the extensometer enables a detailed study of the serrated yield phenomena associated with 4.2 K tensile testing and their influence on the evolution of magnetic susceptibility. The results show that high Mn contents increase the stability of the austenitic structure against a' martensitic transformation, while keeping high strength at cryogenic temperature. Moreover, proper elaboration through primary and possi...

  11. Abdominal macrochaetae of female Hylesia oratex Dyar, 1913 (Insecta: Lepidoptera: Saturniidae: external morphology and medical significance

    ROSÂNGELA BRITO

    2015-09-01

    Full Text Available The representatives of the genus Hylesia Hübner, [1820] are significant among the medically important Lepidoptera. Adult females use abdominal setae to wrap and protect the eggs that remain for months in nature. These setae, in contact with human skin, may cause allergic reactions including swelling, itching and local erythema, known as lepidopterism. The morphology of the abdominal scales and setae from the female H. oratex Dyar, 1913 is herein described and aspects related to their medical significance are discussed. Portions of each abdominal segment were examined through a scanning electron microscope. Two types of scales without medical importance, and two types of setae with medical importance, classified as "true setae" and "modified setae" were found. The true setae, which are slightly fusiform and have radially arranged lateral projections, are responsible for the allergic reactions caused by skin penetration. The modified setae, which are larger, curved, with the median enlarged and serrated margins, can be responsible for the release of chemical substances. This information provides a better understanding of the structure of the urticating setae, which are responsible for lepidopterism outbreaks in humans, and contributes towards the identification of the moth species involved.

  12. Mechanical behavior and stress effects in hard superconductors: a review

    Koch, C.C.; Easton, D.S.

    1977-11-01

    The mechanical properties of type II superconducting materials are reviewed as well as the effect of stress on the superconducting properties of these materials. The bcc alloys niobium-titanium and niobium-zirconium exhibit good strength and extensive ductility at room temperature. Mechanical tests on these alloys at 4.2 0 K revealed serrated stress-strain curves, nonlinear elastic effects and reduced ductility. The nonlinear behavior is probably due to twinning and detwinning or a reversible stress-induced martensitic transformation. The brittle A-15 compound superconductors, such as Nb 3 Sn and V 3 Ga, exhibit unusual elastic properties and structural instabilities at cryogenic temperatures. Multifilamentary composites consisting of superconducting filaments in a normal metal matrix are generally used for superconducting devices. The mechanical properties of alloy and compound composites, tapes, as well as composites of niobium carbonitride chemically vapor deposited on high strength carbon fibers are presented. Hysteretic stress-strain behavior in the metal matrix composites produces significant heat generation, an effect which may lead to degradation in the performance of high field magnets. Measurements of the critical current density, J/sub c/, under stress in a magnetic field are reported. Modest stress-reversible degradation in J/sub c/ was observed in niobium-titanium composites, while more serious degradation was found in Nb 3 Sn samples. The importance of mechanical behavior to device performance is discussed

  13. Nanoindentation studies on Cu-Ti-Zr-Ni-Si-Sn bulk metallic glasses

    Mukhopadhyay, N.K.; Belger, A.; Paufler, P.; Kim, D.H.

    2007-01-01

    In the present investigation, Cu 47 Ti 33 Ni 6 Sn 2 Si 1 (numbers indicate at.%) bulk metallic glass (BMG), fabricated by injection casting has been used for indentation experiments. Microindentation and nanoindentation tests were conducted to study the indentation responses of this material. The nanohardness and the Young's modulus were calculated following the standard procedure in literature. Around the indent, shear bands can be clearly observed under scanning electron microscopy examination. Atomic-force microscopy shows the pile of the material in a step-wise manner. The thinned sample near the indent shows the evolution of nanocrystals (∼20-30 nm) by transmission electron microscopy. During nanoindentation (in single- and multi-indent mode) experiments, the load-displacement P-h curves show displacement bursts, which are also known as pop-ins or serrations. The total displacement during indentation can be accounted for by sum total effect of the individual displacement of all the displacement-bursts observed in the P-h curve. Thus the plastic deformation of this glassy material appears to proceed in a discrete manner unlike ductile metallic alloys

  14. Rheological investigation and simulation of a debris-flow event in the Fella watershed

    M. A. Boniello

    2010-05-01

    Full Text Available To set an approach for the future territorial planning, the Geological Survey of Friuli Venezia Giulia Region, through the researchers of Trieste University, started a program of debris-flow risk analysis using Flo-2D software as tool to delimit the hazardous areas. In the present paper, as a case study, a debris flow, called Fella sx, occurring in a torrent catchment was analyzed. The choice was due to the abundance of information about past events, inundated areas, rain fall, geology and to its representativeness. An initial back-analysis investigation identified a couple of representative rheological parameters. Riverbed samples were collected, sieve analyses were performed and rheological tests were carried out on the fraction finer than 0.063 mm using a rotationally controlled stress rehometer equipped with the serrated parallel plate geometry. The shear dependent behaviour was examined at different concentrations ranging from 33 to 48%, by weight. Viscosity data treatment was performed to determine the most suitable rheological model to provide the best approximation of the debris-flow behaviour. The rheological parameters, derived from experimental data, were used and compared with those obtained through the back-analysis and with the real inundated area. Data obtained through rheological analysis are useful in constructing scenarios of future events where no data for back-analysis are available.

  15. Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic–martensitic steel

    Vanaja, J.; Laha, K.; Sam, Shiju; Nandagopal, M.; Panneer Selvi, S.; Mathew, M.D.; Jayakumar, T.; Rajendra Kumar, E.

    2012-01-01

    Tensile strength and flow behaviour of a Reduced Activation Ferritic–Martensitic (RAFM) steel (9Cr–1W–0.06Ta–0.22V–0.08C) have been investigated over a temperature range of 300–873 K at different strain rates. Tensile strength of the steel decreased with temperature and increased with strain rate except at intermediate temperatures. Negative strain rate sensitivity of flow stress of the steel at intermediate temperatures revealed the occurrence of dynamic strain ageing in the steel, even though no serrated flow was observed. The tensile flow behaviour of the material was well represented by the Voce strain hardening equation for all the test conditions. Temperature and strain rate dependence of the various parameters of Voce equation were interpreted with the possible deformation mechanisms. The equivalence between the saturation stress at a given strain rate in tensile test and steady state deformation rate at a given stress in creep test was found to be satisfied by the RAFM steel.

  16. The First Record of Linguatula serrata Infection of Two-Humped Camel (Camelus bactrinus In Iran

    B Hajimohammadi

    2009-02-01

    Full Text Available "nLinguatula serrata, is a cosmopolitan zoonotic parasite. Adult of L. serrrata parasitize the nasopharynx of canids. Con­suming raw glandular material of infected intermediate hosts (camel, sheep, cattle, goat, etc. can infect human. In Iran, two-humped camel is merely found in cold regions (Ardabil and East Azarbijan provinces and is in danger of extinc­tion. A seven-year-old two-humped male camel, due to car accident injury was sent to slaughterhouse of Tabriz, Iran. In meat inspection practice, the visceral organs were taken out. A small red nodule having a white center was observed at the surface of the left lobe of lung. To study more, the whole of the left lobe of lung was sent to the parasitology labora­tory. One nymph of L. serrata was separated from the specimen. This is the first report of infection with L. serrate of two-humped camel in Iran.

  17. Micropapillary Structures in Colorectal Cancer: An Anoikis-resistant Subpopulation.

    Patankar, Madhura; Väyrynen, Sara; Tuomisto, Anne; Mäkinen, Markus; Eskelinen, Sinikka; Karttunen, Tuomo J

    2018-05-01

    Micropapillary structures (MIPs) are focal piles of columnar cells without extracellular matrix contact, and common in serrated colorectal carcinoma (CRC). In order to characterize biology of MIPs in colorectal cancer (CRC), the proliferation and apoptosis rates, and survivin expression were compared between MIPs and other cancer epithelial cells of CRC (non-MIPs). We assessed 46 samples of normal colorectal mucosa, 62 carcinomas and 54 polyps for proliferation (Ki67), apoptosis (M30), and survivin expression by immunohistochemistry. MIPs in carcinoma showed lower rates of proliferation and apoptosis than non-MIPs. A low rate of apotosis in MIPs was associated with poor prognosis in local carcinoma. In normal crypts, nuclear-to-cytoplasmic transition of survivin indicated epithelial cell maturation. Cancer cases showed increased cytoplasmic expression of survivin than normal mucosa and polyps. However, MIPs showed lower nuclear and cytoplasmic survivin expression than non-MIPs. Our findings suggest that MIPs represent a biologically distinct subpopulation of carcinoma cells with features of anoikis resistance and possibly quiescence. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

  18. Gymnothorax phalarus, a new eastern Pacific moray eel (Pisces: Muraenidae

    William A. Bussing

    1998-06-01

    Full Text Available Gymnothorax phalarus is described from 23 individuals taken in trawl and dredge collections made on the Pacific coast of Costa Rica. The new species is nearly always syntopic with a similar species, Gymnothorax equatorialis. The new moray is distinguished by its white-spotted pattern, uniserial, slightly serrated teeth in adults, four infraorbital pores and mean vertebral formula of 6-58-140. Of the total of 21 valid species of morays recorded from the Pacific coast of Costa Rica, only the new species and G. equatorialis form part of the trawl fishery as the remainder are almost entirely restricted to nearshore rocky habitats. The known range of G. phalarus is from Baja California to Peru.Gymnothorax phalarus se describe con base en 23 individuos de colecciones hechas por redes de arrastre y dragas en la costa Pacífica de Costa Rica. La especie nueva es casi siempre sintópica con la especie similar, Gymnothorax equatorialis. La nueva morena se distingue por su patrón de puntos blancos, dientes ligeramente aserrados y uniseriales en adultos, cuatro poros infraorbitales y MVF (Fórmula de Vértebras de 6-58-140. México a Perú.

  19. Standard test method for tension testing of structural alloys in liquid helium

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method describes procedures for the tension testing of structural alloys in liquid helium. The format is similar to that of other ASTM tension test standards, but the contents include modifications for cryogenic testing which requires special apparatus, smaller specimens, and concern for serrated yielding, adiabatic heating, and strain-rate effects. 1.2 To conduct a tension test by this standard, the specimen in a cryostat is fully submerged in normal liquid helium (He I) and tested using crosshead displacement control at a nominal strain rate of 10−3 s−1 or less. Tests using force control or high strain rates are not considered. 1.3 This standard specifies methods for the measurement of yield strength, tensile strength, elongation, and reduction of area. The determination of the elastic modulus is treated in Test Method E 111. Note 1—The boiling point of normal liquid helium (He I) at sea level is 4.2 K (−269°C or −452.1°F or 7.6°R). It decreases with geographic elevation and is...

  20. Nuclear management in manual small incision cataract surgery by snare technique

    Bhattacharya Debasish

    2009-01-01

    Full Text Available Manual small incision cataract surgery has evolved into a popular method of cataract surgery in India. However, in supra hard cataract, bringing out the whole nucleus through the sclerocorneal flap valve incision becomes difficult. A bigger incision required in such cataracts loses its value action, as the internal incision and corneal valve slips beyond the limbus into sclera. Struggling with the supra hard cataracts through a regular small incision. Phacofracture in the anterior chamber becomes a useful option in these cases. In the snare technique, a stainless steel wire loop when lassoed around the nucleus in the anterior chamber constricts from the equator, easily dividing the hardest of the nuclei into two halves. The wire loop constricts in a controlled way when the second cannula of snare is pulled. The divided halves can easily be brought out by serrated crocodile forceps. This nuclear management can be safely performed through a smaller sclerocorneal flap valve incision where the corneal valve action is retained within the limbus without sutures, and the endothelium or the incision is not disturbed. However, the technique requires space in the anterior chamber to maneuver the wire loop and anterior chamber depth more than 2.5 mm is recommended. Much evidence to this wonderful technique is not available in literature, as its popularity grew through live surgical workshops and small interactive conferences.

  1. Development of Intergranular Residual Stress and Its Implication to Mechanical Behaviors at Elevated Temperatures in AL6XN Austenitic Stainless Steel

    Hong, Yanyan; Li, Shilei; Li, Hongjia; Li, Jian; Sun, Guangai; Wang, Yan-Dong

    2018-05-01

    Neutron diffraction was used to investigate the residual lattice strains in AL6XN austenitic stainless steel subjected to tensile loading at different temperatures, revealing the development of large intergranular stresses after plastic deformation. Elastic-plastic self-consistent modeling was employed to simulate the micromechanical behavior at room temperature. The overall variations of the modeled lattice strains as a function of the sample direction with respect to the loading axis agree in general with the experimental values, indicating that dislocation slip is the main plastic deformation mode. At 300 °C, the serrated flow in the stress-strain curve and the great amount of slip bands indicate the appearance of dynamic strain aging. Except for promoting the local strain concentration, the long-range stress field caused by the planar slip bands near the grain boundaries is also attributed to the decrease in the experimental intergranular strains. An increase in the lattice strains localized at some specific specimen orientations for reflections at 600 °C may be explained by the segregation of solute atoms (Cr and Mo) at dislocation slip bands. The evolution of full-width at half-maximum demonstrates that the dynamic recovery indeed plays an important role in alleviating the local strain concentrations during tensile loading at 600 °C.

  2. Unearthing the Fossorial Tadpoles of the Indian Dancing Frog Family Micrixalidae.

    Gayani Senevirathne

    Full Text Available Tadpoles of the monotypic Indian dancing frog family Micrixalidae have remained obscure for over 125 years. Here we report the discovery of the elusive tadpoles of Micrixalus herrei from the sand beds of a forested stream in southern Western Ghats, and confirm their identity through DNA barcoding. These actively burrowing tadpoles lead an entirely fossorial life from eggs to late metamorphic stages. We describe their internal and external morphological characters while highlighting the following features: eel-like appearance, extensively muscularized body and tail, reduced tail fins, skin-covered eyes, delayed development of eye pigmentation in early pre-metamorphic stages (Gosner stages 25-29, prominent tubular sinistral spiracle, large transverse processes on vertebrae II and III, ankylosed ribs on transverse processes of vertebra II, notochord terminating before the atlantal cotyle-occipital condyle junction, absence of keratodonts, serrated well-formed jaw sheaths, and extensive calcified endolymphatic sacs reaching sacrum posteriorly. The tadpole gut contains mostly fine sediments and sand. We discuss the eel-like morphology and feeding habits of M. herrei in the context of convergence with other well-known fossorial tadpoles. This discovery builds the knowledge base for further comparative analyses and conservation of Micrixalus, an ancient and endemic lineage of Indian frogs.

  3. The fate of murine norovirus and hepatitis A virus during preparation of fresh produce by cutting and grating.

    Wang, Qing; Erickson, Marilyn; Ortega, Ynes R; Cannon, Jennifer L

    2013-03-01

    Human noroviruses and hepatitis A virus (HAV) are commonly associated with outbreaks occurring in restaurant establishments and catered events. Food handlers are major contributing factors to foodborne illnesses initiated in the kitchen setting. In this study, transfer of HAV and murine norovirus (MNV-1), a human norovirus surrogate, between produce (cucumbers, strawberries, tomatoes, cantaloupes, carrots, and honeydew melons) and common kitchen utensils (graters and knives) was investigated. The extent of virus transfer to produce during utensil application, in the presence and the absence of food residue, and the impact of knife surface properties (sharp, dull, serrated) was also investigated. Transfer of MNV-1 and HAV from produce items, initially contaminated with ~5.5 log PFU, to knives and graters during application ranged from 0.9 to 5.1 log PFU. MNV-1 transfer to knives was the greatest for cucumbers, strawberries, and tomatoes, and the least for honeydew melons, while transfer of HAV to knives was greater for tomatoes and honeydew melons than strawberries, cantaloupes, and cucumbers. After preparation of a contaminated produce item, knife cross-contamination easily occurred as viruses were detected on almost all of the seven produce items successively prepared. Produce residues on utensils often resulted in less virus transfer when compared to utensils without residue accumulation. Knife surface properties did not impact virus transfer. The ease of virus transfer between produce and utensils demonstrated by the current study highlights the importance of efforts aimed toward preventing cross-contamination in the kitchen environment.

  4. Notch Effect on Tensile Deformation Behavior of 304L and 316L Steels in Liquid Helium and Hydrogen

    Shibata, K.; Fujii, H.

    2004-01-01

    Tensile tests of type 304L and 316L steels were carried out using round bar specimens with a notch in liquid helium, hydrogen, liquid nitrogen and at ambient temperature. The obtained tensile strengths were compared with the tensile strengths of smooth specimens. For smooth specimens, tensile strength increased with a decrease in temperature and the strengths in liquid helium and hydrogen show similar values in both steels. For notched specimen of 304L steel, tensile strength (including fracture strength) increased noticeably from ambient to liquid nitrogen temperature but showed a large decrease in liquid helium and hydrogen. In liquid hydrogen and helium, the tensile strength is a little lower in liquid hydrogen than in liquid helium and both strengths are lower than tensile strengths of smooth specimens. For notched specimen of 316L steel, an increase in tensile strength from ambient to liquid nitrogen temperature was not so large and a decrease from liquid nitrogen to liquid hydrogen was small. The tensile strengths in liquid helium and hydrogen were nearly same and higher than those of smooth specimens. Different behavior of serration was observed between liquid helium and hydrogen, and between 304L and 316L steels. The reasons for these differences were discussed using computer simulation

  5. An activated form of UFO alters leaf development and produces ectopic floral and inflorescence meristems.

    Eddy Risseeuw

    Full Text Available Plants are unique in their ability to continuously produce new meristems and organ primordia. In Arabidopsis, the transcription factor LEAFY (LFY functions as a master regulator of a gene network that is important for floral meristem and organ specification. UNUSUAL FLORAL ORGANS (UFO is a co-activator of LEAFY and is required for proper activation of APETALA3 in the floral meristem during the specification of stamens and petals. The ufo mutants display defects in other parts of the flower and the inflorescence, suggestive of additional roles. Here we show that the normal determinacy of the developing Arabidopsis leaves is affected by the expression of a gain-of-function UFO fusion protein with the VP16 transcriptional activator domain. In these lines, the rosette and cauline leaf primordia exhibit reiterated serration, and upon flowering produce ectopic meristems that develop into flowers, bract leaves and inflorescences. These striking phenotypes reveal that developing leaves maintain the competency to initiate flower and inflorescence programs. Furthermore, the gain-of-function phenotypes are dependent on LFY and the SEPALLATA (SEP MADS-box transcription factors, indicative of their functional interactions with UFO. The findings of this study also suggest that UFO promotes the establishment of the lateral meristems and primordia in the peripheral zone of the apical and floral meristems by enhancing the activity of LFY. These novel phenotypes along with the mutant phenotypes of UFO orthologs in other plant species suggest a broader function for UFO in plants.

  6. An activated form of UFO alters leaf development and produces ectopic floral and inflorescence meristems.

    Risseeuw, Eddy; Venglat, Prakash; Xiang, Daoquan; Komendant, Kristina; Daskalchuk, Tim; Babic, Vivijan; Crosby, William; Datla, Raju

    2013-01-01

    Plants are unique in their ability to continuously produce new meristems and organ primordia. In Arabidopsis, the transcription factor LEAFY (LFY) functions as a master regulator of a gene network that is important for floral meristem and organ specification. UNUSUAL FLORAL ORGANS (UFO) is a co-activator of LEAFY and is required for proper activation of APETALA3 in the floral meristem during the specification of stamens and petals. The ufo mutants display defects in other parts of the flower and the inflorescence, suggestive of additional roles. Here we show that the normal determinacy of the developing Arabidopsis leaves is affected by the expression of a gain-of-function UFO fusion protein with the VP16 transcriptional activator domain. In these lines, the rosette and cauline leaf primordia exhibit reiterated serration, and upon flowering produce ectopic meristems that develop into flowers, bract leaves and inflorescences. These striking phenotypes reveal that developing leaves maintain the competency to initiate flower and inflorescence programs. Furthermore, the gain-of-function phenotypes are dependent on LFY and the SEPALLATA (SEP) MADS-box transcription factors, indicative of their functional interactions with UFO. The findings of this study also suggest that UFO promotes the establishment of the lateral meristems and primordia in the peripheral zone of the apical and floral meristems by enhancing the activity of LFY. These novel phenotypes along with the mutant phenotypes of UFO orthologs in other plant species suggest a broader function for UFO in plants.

  7. New aspects about reduced LCF-life time of spherical ductile cast iron due to dynamic strain aging at intermediate temperatures

    Mouri, Hayato; Wunderlich, Wilfried; Hayashi, Morihito

    2009-01-01

    Spherical ductile cast iron (FCD400) is widely used as container material in nuclear energy processing line due to its superior mechanical properties and low price. Fatigue properties in low cycle fatigue (LCF) can be described well by the Manson-Coffin-Basquin's rule. However, at intermediate temperature range between 453 and 723 K the elongation-temperature-diagram shows a significantly 20-10% reduced elongation and an increase in yield stress in tensile test experiments. These non-linear deviations and the phenomenon of less ductility at intermediate temperatures are known for a long time [K. Chijiiwa, M. Hayashi, Mechanical properties of ductile cast iron at temperature in the region of room temperature to liquid, Imono 51 (7) (2004) 395-400]. But the following explanation is presented for the first time. In the same temperature range as the reduced fatigue life time dynamic strain ageing (DSA) also known as Portevin-le-Chartelier effect with the formation of visible serrations occurs. Both phenomena are explained by interaction effects between carbon diffusion and dislocation velocity which have at this temperature the same order of magnitude. However, this phenomenon shows interesting behavior at intermediate temperature range. During the low cycle fatigue test, DSA phenomenon disappeared, but mechanical properties show clear evidence of DSA phenomenon. Therefore, the purpose of this paper is to study the correlation of DSA occurrence, LCF and mechanical properties.

  8. Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel

    Park, Jaeyeong; Kim, Jung-Su; Kang, Minju; Sohn, Seok Su; Cho, Won Tae; Kim, Hyoung Seop; Lee, Sunghak

    2017-01-01

    TWIP-cored three-layer steel sheets were newly fabricated by hot rolling of TWIP steel sheet surrounded by low-carbon (LC) or interstitial-free (IF) steel sheets. TWIP/LC or TWIP/IF interfaces were well bonded without pores or voids, while a few pearlites were thinly formed along the interfaces. The strengths and elongation of the TWIP-cored sheets increased as the volume fraction of TWIP-cored region increased, and were also well matched with the ones calculated by a rule of mixtures based on volume fraction or force fraction. According to digital image correlation and electron back-scatter diffraction analyses, very high strain hardening effect in the initial deformation stage and active twin formation in the interfacial region beneficially affected the overall homogeneous deformation in the TWIP-cored sheets without any yield point phenomenon occurring in the LC sheet and serrations occurring in the TWIP sheet, respectively. These TWIP-cored sheets can cover a wide range of yield strength, tensile strength, and ductility levels, e.g., 320~498 MPa, 545~878 MPa, and 48~54%, respectively, by controlling the volume fraction of TWIP-cored region, and thus present new applications to multi-functional automotive steel sheets requiring excellent properties.

  9. STUDI TENTANG BENTUK, MOTIF DAN TEKNIK KRIYA PERAK KOTO GADANG MINANGKABAU

    M. Nasrul Kamal

    2013-06-01

    Full Text Available Silver  is  a  white  shiny metal. It is  used as daily needs as well as decoration. The silver handicraft in Koto Gadang district have been well-known since long time ago.  The things made by each handycraft centers are almost the same so that it is difficult to create interesting shapes for consumers. Beside that, the technique used is still a simple one, and the motives applied to the handicraft are only little developed. Therefore, this research tries to describe several things:  1 To identify silver handicraft product shapes; 2 To identify the name of the motives being developed; 3 To explain the production technique of silver handicraft. This research is conducted in Koto  Gadang; using quantitative  and  qualitative  sampling. The result of this research is silver handicraft shapes, which  involve various kinds of earring, bracelet, brooch, ring, necklace, pendant, and miniature, as well as ornament for wedding ceremnny, among other things are various shapes of necklace, ring, and ear-plug. To make handicraft, chisel, kikir (serrated iron for smoothing something, plait, and sickle. The motives applied on the products are cucumber leaf, padek leaf, jackfruit leaf, "H" leaf Lombok, bataro, straight lines, winding, parallel line, bamboo plait, and fish scale. Key words: Koto Gadang, silver handicraft, shape, motive, and technical handicraft study

  10. Dye-sensitized solar cell based on AZO/Ag/AZO multilayer transparent conductive oxide film

    Qi, Jin-He; Li, Ying; Duong, Thanh-Tung; Choi, Hyung-Jin; Yoon, Soon-Gil

    2013-01-01

    Highlights: ► AZO/Ag/AZO (AAA) multilayer was used for working electrode of DSSC cell. ► The 100 nm-thick Nb-doped TiO 2 layer showed a good blocking effect. ► The DSSC cell by AAA TCO material showed the highest efficiency of about 3.25%. -- Abstract: Niobium-doped TiO 2 blocking layer and Al-doped ZnO (AZO)/Ag/AZO (AAA) TCO layers were grown onto glass substrate using pulsed laser deposition (PLD) and direct current (dc)/radio-frequency (rf) sputtering at room temperature, respectively for dye-sensitized solar cell (DSSC) applications. The 100 nm-thick NTO layer showed a blocking effect for the oxygen diffusion into AAA layer and for the recombination of the electrons. The DSSC cell composed of the NTO (100 nm)/AAA (400 nm) showed the highest photo-electrical efficiency of about 3.25%. An insertion of aluminum foil between serrated clip and AAA (100 nm) TCO improved a photo-conversion efficiency of the DSSC

  11. Parents and schools that grow in the 21st century

    Eulalia Torrubia Balagué

    2017-07-01

    Full Text Available The University Pontificia of Salamanca a few years ago has offered a program of parental training for families who come to the Master of clinical intervention of Logopedia, by teacher Dolors Rivas Serrat. Children with disorders in language and development receive speech-language intervention. Parents participate in a training program every week and the children receive educational guidance, intervention in learning problems and study support. Some of the issues addressed between parents and education professionals are covered in this article and have to do with changes in the Spanish family, new family models or lack of authority in educational relationships established in the family. And at school. The work we do is developed through a parent school. This methodology is indispensable in the family formation processes. They are privileged spaces of participation and learning, constitute an adequate methodology for educators, counselors and other professionals of education. Pedagogy, as normative science, explains the most adequate family models, the risks of certain educational styles or the importance of authority in family-school relations. These are some of the conclusions that we have reached and which we set out below.

  12. Studies of Shear Band Velocity Using Spatially and Temporally Resolved Measurements of Strain During Quasistatic Compression of Bulk Metallic Glass

    Wright, W J; Samale, M; Hufnagel, T; LeBlanc, M; Florando, J

    2009-06-15

    We have made measurements of the temporal and spatial features of the evolution of strain during the serrated flow of Pd{sub 40}Ni{sub 40}P{sub 20} bulk metallic glass tested under quasistatic, room temperature, uniaxial compression. Strain and load data were acquired at rates of up to 400 kHz using strain gages affixed to all four sides of the specimen and a piezoelectric load cell located near the specimen. Calculation of the displacement rate requires an assumption about the nature of the shear displacement. If one assumes that the entire shear plane displaces simultaneously, the displacement rate is approximately 0.002 m/s. If instead one assumes that the displacement occurs as a localized propagating front, the velocity of the front is approximately 2.8 m/s. In either case, the velocity is orders of magnitude less than the shear wave speed ({approx}2000 m/s). The significance of these measurements for estimates of heating in shear bands is discussed.

  13. Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling

    Cao, Yunfeng; Xie, Xie; Antonaglia, James; Winiarski, Bartlomiej; Wang, Gongyao; Shin, Yung C.; Withers, Philip J.; Dahmen, Karin A.; Liaw, Peter K.

    2015-05-01

    The Zr-based bulk metallic glasses (BMGs) are a new family of attractive materials with good glass-forming ability and excellent mechanical properties, such as high strength and good wear resistance, which make them candidates for structural and biomedical materials. Although the mechanical behavior of BMGs has been widely investigated, their deformation mechanisms are still poorly understood. In particular, their poor ductility significantly impedes their industrial application. In the present work, we show that the ductility of Zr-based BMGs with nearly zero plasticity is improved by a laser shock peening technique. Moreover, we map the distribution of laser-induced residual stresses via the micro-slot cutting method, and then predict them using a three-dimensional finite-element method coupled with a confined plasma model. Reasonable agreement is achieved between the experimental and modeling results. The analyses of serrated flows reveal plentiful and useful information of the underlying deformation process. Our work provides an easy and effective way to extend the ductility of intrinsically-brittle BMGs, opening up wider applications of these materials.

  14. Gut-associated Lymphoid Tissue (GALT) Carcinoma or Dome Carcinoma?

    Rubio, Carlos A; Schmidt, Peter T

    2016-10-01

    The vast majority of colorectal carcinomas (CRCs) evolve from mucosa not associated to lymphoid tissues aggregates via the adenoma-carcinoma sequence or via the serrated pathway. Rarely CRCs evolve from gut mucosa associated to lymphoid tissue (GALT). Based on the presence of a circumscribed elevation in the colorectal mucosa, GALT carcinomas are also referred to as dome carcinomas (DC). Descriptions of the surface mucosa covering 21 GALT-CRCs appearing in pathological reports were reviewed. Three of the 21 GALT-CRCs fulfilled the criteria of dome carcinoma. Of the remaining 18 GALT-CRCs, nine were described as polypoid lesions, five as plaque-like lesions, two as sessile elevated lesions or mass, one as ulcerated and one as histological finding. Hence, only 14.3% (n=3) of the 21 GALT-CRCs displayed a dome configuration, whereas the majority, 85.7% (n=18), exhibited structures other than dome shapes at gross or at histologic examination. It becomes apparent that by using "dome" in addressing carcinomas in the colorectal mucosa, many cases of GALT carcinomas might be overlooked. Another drawback of using the "dome" nomenclature is that dome-like outlines may be detected in small metastatic tumors in the submucosa or in small colorectal carcinomas not arising from GALT mucosa. Instead, by using "GALT carcinoma", that is the histologic diagnosis in addressing these neoplasias, all cases of GALT-CRCs will be included. Copyright© 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  15. The RNA-binding protein HOS5 and serine/arginine-rich proteins RS40 and RS41 participate in miRNA biogenesis in Arabidopsis

    Chen, Tao

    2015-07-30

    MicroRNAs are a class of small regulatory RNAs that are generated from primary miRNA (pri-miRNA) transcripts with a stem-loop structure. Accuracy of the processing of pri-miRNA into mature miRNA in plants can be enhanced by SERRATE (SE) and HYPONASTIC LEAVES 1 (HYL1). HYL1 activity is regulated by the FIERY2 (FRY2)/RNA polymerase II C-terminal domain phosphatase-like 1 (CPL1). Here, we discover that HIGH OSMOTIC STRESS GENE EXPRESSION 5 (HOS5) and two serine/arginine-rich splicing factors RS40 and RS41, previously shown to be involved in pre-mRNA splicing, affect the biogenesis of a subset of miRNA. These proteins are required for correct miRNA strand selection and the maintenance of miRNA levels. FRY2 dephosphorylates HOS5 whose phosphorylation status affects its subnuclear localization. HOS5 and the RS proteins bind both intronless and intron-containing pri-miRNAs. Importantly, all of these splicing-related factors directly interact with both HYL1 and SE in nuclear splicing speckles. Our results indicate that these splicing factors are directly involved in the biogenesis of a group of miRNA.

  16. Microstructure evolution and phase transition in La/Mn doped barium titanate ceramics

    Vesna Paunović

    2010-12-01

    Full Text Available La/Mn codoped BaTiO3 with different La2O3 content, ranging from 0.1 to 5.0 at% La, was investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all investigated samples. The samples were sintered at 1320°C and 1350°C for two hours. Microstructural studies were done using SEM and EDS analysis. The fine-grained microstructure was obtained even for low content of La. The appearance of secondary abnormal grains with serrated features along grain boundaries was observed in 1.0 at% La-BaTiO3 sintered at 1350°C. Nearly flat permittivity-temperature response was obtained in specimens with 2.0 and 5.0 at% La. Using the modified Curie-Weiss law a critical exponent γ and C’were calculated. The obtained values of γ pointed out the diffuse phase transformation in heavily doped BaTiO3 and great departure from the Curie-Weiss law for low doped ceramics.

  17. Cronkhite-Canada Syndrome Associated with Metastatic Colon Cancer

    Shirin Haghighi

    2018-04-01

    Full Text Available Cronkhite-Canada syndrome is characterized by gastrointestinal and ectodermal manifestations. In this paper, we describe a 64-year-old Iranian male, presenting with Cronkhite-Canada syndrome with metastatic colon cancer. The patient was suffering from hair loss, which occurred on the scalp at first and then, during 5 months, extended to the whole body. After that, his sense of taste was impaired, and 2 months later, gastrointestinal symptoms gradually started, with weight loss of 20 kg over 2 months with an initial weight of 100 kg. Finally, he was admitted to our center 10 months after the onset of symptoms. On skin examination, generalized hair loss and hyperpigmentation and dysmorphic nail changes were observed. Multiple polyps within the colon and sigmoid were observed on colonoscopy. According to biopsies, a serrated adenoma and an invasive adenocarcinoma were reported in the ascending colon and sigmoid, respectively. Other polyps were pseudopolyps, and their characteristics were not significant. Computed tomography of the lungs and abdomen showed multiple adenopathies. On biopsy, metastatic adenocarcinoma was reported. The patient underwent chemotherapy with FOLFIRI and ERBITUX. Finally, after 5 courses of chemotherapy, his regimen was changed to FOLFOX and Avastin because of evidence of progression on computed tomography. The etiology of Cronkhite-Canada syndrome is currently unknown, and the optimal therapy has not been reported so far. This syndrome has many complications; the major of them is malignancy, and the prognosis is poor with a mortality rate of 50%. Therefore, annual monitoring is necessary in these patients.

  18. Influence of temperature on a low-cycle fatigue behavior of a ferritic stainless steel

    Kabir, S. M. Humayun; Yeo, Tae in

    2014-01-01

    The main objective of this study is to reveal the effect of dynamic strain ageing (DSA) on a ferritic stainless steel with detail relation to monotonic and cyclic responses over a wide range of temperatures. For assessing the effect of strain rate on mechanical properties, tensile test results are studied at two different strain rates of 2X10"-"3 /s and 2X10"-"4 /s. Typical responses of this material are compared with other alloy in literatures that exhibits DSA. Serrations in monotonic stress-strain curves and anomalous dependence of tensile properties with temperatures are attributed to the DSA effect. The low cycle fatigue curves exhibit prominent hardening and negative temperature dependence of half-life plastic strain amplitude in temperatures between 300 .deg. C - 500 .deg. C which can be explained by DSA phenomenon. The regime for dependence of marked cyclic hardening lies within the DSA regime of anomalous dependence of flow stress and dynamic strain hardening stress with temperature and negative strain rate sensitivity regime of monotonic response. It is believed that shortened fatigue life observed in the intermediate temperature is mainly due to the adverse effect of DSA. An empirical life prediction model is addressed for as-received material to consider the effect of temperature on fatigue life. The numbers of load reversals obtained from experiment and predicted from fatigue parameter are compared and found to be in good agreement.

  19. The normal squamocolumnar junction is circumferentially even and minimal irregularities are manifestations of gastroesophageal acid reflux.

    Guerrero Garcia Hall, Mats; Wenner, Jörgen; Öberg, Stefan

    2017-03-01

    The macroscopic appearance of the normal squamocolumnar junction (SCJ) is often described as serrated with short projections of columnar mucosa that extend into the esophagus. As studies of the normal SCJ are sparse, the aim of this study was to test the hypothesis that the normal SCJ is even and that irregularities are manifestations of acid reflux. Fifty asymptomatic subjects and 149 patients with symptoms suggestive of gastroesophageal reflux disease underwent endoscopy and 48-h pH monitoring with a pH electrode positioned immediately above the SCJ. The shape of the SCJ was assessed according to the Z-line appearance classification and correlated with clinical characteristics and the degree of esophageal acid exposure in the most distal esophagus. Even SCJs without irregularities were significantly more common in asymptomatic subjects compared with patients (50% versus 10%, p acid exposure in individuals with an even SCJ was within normal limits. With increasing degree of irregularity of the SCJ, the frequency and duration of reflux episodes, the degree of distal esophageal acid exposure, and the prevalence of abnormal acid exposure increased progressively and significantly. The shape of the normal SCJ is even and also minimal irregularities are a consequence of acid reflux, likely due to the formation of small areas of metaplastic columnar mucosa.

  20. Electro-thermomechanical behaviour of a Ti-45.0Ni-5.0Cu (at.%) alloy during shape memory cycling

    De Araujo, C.J.; Morin, M.; Guenin, G.

    1999-01-01

    In the present paper, electrical resistance (ER) changes are measured simultaneously with the stress-assisted two-way memory effect (SATWME) in Ti-45.0Ni-5.0Cu (at.%) wires during thermal cycling (max. 15 cycles) for several different stress levels. Interesting qualitative evolutions of the ε-ER-T loops during cycling are observed as a function of the applied stress. On cooling, for stresses higher than 175 MPa, a clear deviation of the ε-T curves is verified and the reversion of this anomaly is not observed during heating. After some cycles, serrations are frequently observed on the ER-T loops essentially below M f and above A f , indicating an interaction between the formation and reversion of oriented martensite variants with the defects introduced during the thermomechanical cycling. A linear relationship is observed between ER and ε for the direct and reverse transformation ranges. The characteristic slope d(ΔR/R)/dε is slightly dependent on the applied stress and on the number of thermal cycles. (orig.)

  1. Water Exchange Produces Significantly Higher Adenoma Detection Rate Than Water Immersion: Pooled Data From 2 Multisite Randomized Controlled Trials.

    Leung, Felix W; Koo, Malcolm; Cadoni, Sergio; Falt, Premysl; Hsieh, Yu-Hsi; Amato, Arnaldo; Erriu, Matteo; Fojtik, Petr; Gallittu, Paolo; Hu, Chi-Tan; Leung, Joseph W; Liggi, Mauro; Paggi, Silvia; Radaelli, Franco; Rondonotti, Emanuele; Smajstrla, Vit; Tseng, Chih-Wei; Urban, Ondrej

    2018-03-02

    To test the hypothesis that water exchange (WE) significantly increases adenoma detection rates (ADR) compared with water immersion (WI). Low ADR was linked to increased risk for interval colorectal cancers and related deaths. Two recent randomized controlled trials of head-to-head comparison of WE, WI, and traditional air insufflation (AI) each showed that WE achieved significantly higher ADR than AI, but not WI. The data were pooled from these 2 studies to test the above hypothesis. Two trials (5 sites, 14 colonoscopists) that randomized 1875 patients 1:1:1 to AI, WI, or WE were pooled and analyzed with ADR as the primary outcome. The ADR of AI (39.5%) and WI (42.4%) were comparable, significantly lower than that of WE (49.6%) (vs. AI P=0.001; vs. WI P=0.033). WE insertion time was 3 minutes longer than that of AI (Prate (vs. AI) of the >10 mm advanced adenomas. Right colon combined advanced and sessile serrated ADR of AI (3.4%) and WI (5%) were comparable and were significantly lower than that of WE (8.5%) (vs. AI P<0.001; vs. WI P=0.039). Compared with AI and WI, the superior ADR of WE offsets the drawback of a significantly longer insertion time. For quality improvement focused on increasing adenoma detection, WE is preferred over WI. The hypothesis that WE could lower the risk of interval colorectal cancers and related deaths should be tested.

  2. Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

    Underwood, Charlie; Johanson, Zerina; Smith, Moya Meredith

    2016-11-01

    The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern.

  3. Alnus subgenus Alnus in the Eocene of western North America based on leaves, associated catkins, pollen, and fruits.

    Liu, Xiaoyan; Manchester, Steven R; Jin, Jianhua

    2014-11-01

    The fossil record of alder (Alnus) is well known in the Cenozoic deposits throughout the northern hemisphere, based on numerous reports of the distinctive pollen, cone-like infructescences, staminate inflorescences, and leaves. However, our understanding of the systematic position of these fossils relative to the modern phylogeny of the genus has been limited because most fossils were described from only one organ. We examined well-preserved leaves and associated fruiting and staminate catkins from the middle Eocene, Clarno Formation, Oregon, USA by stereomicroscopy. In situ and dispersed pollen were cleaned with HF and acetolized for light and scanning electron microscopy. We reconstructed a new extinct species based on multiple organs and discuss significant phytogeographic and phylogenetic implications for Alnus. Alnus clarnoensis sp. nov. is described based on serrate leaves with 1-4 small teeth between each primary tooth, associated cone-like fruiting catkins with fruits in situ, and associated slender pollen catkins bearing in situ 3- to 6-pored pollen with arci between the pores. Combined investigations of each organ indicate that they probably derive from the same species and can be confidently attributed to subgenus Alnus Furlow based on leaf architecture and pollen pore number frequency. The Clarno fossils are most similar to the extant North American species of subgenus Alnus rather than to those from Asia and Europe, indicating that this modern subgenus was already distinct by the middle Eocene and that the intercontinental migration likely occurred earlier. © 2014 Botanical Society of America, Inc.

  4. The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams

    Movahedi, Nima; Linul, Emanoil; Marsavina, Liviu

    2018-01-01

    In this research, the mechanical behavior of closed-cell aluminum (Al)-alloy foams was investigated at different temperatures in the range of 25-450 °C. The main mechanical properties of porous Al-alloy foams are affected by the testing temperature, and they decrease with the increase in the temperature during uniaxial compression. From both the constant/serrated character of stress-strain curves and macro/microstructural morphology of deformed cellular structure, it was found that Al foams present a transition temperature from brittle to ductile behavior around 192 °C. Due to the softening of the cellular structure at higher temperatures, linear correlations of the stress amplitude and that of the absorbed energy with the temperature were proposed. Also, it was observed that the presence of inherent defects like micropores in the foam cell walls induced further local stress concentration which weakens the cellular structure's strength and crack propagation and cell-wall plastic deformation are the dominant collapse mechanisms. Finally, an energy absorption study was performed and an optimum temperature was proposed.

  5. High-temperature deformation and processing maps of Zr-4 metal matrix with dispersed coated surrogate nuclear fuel particles

    Chen, Jing; Liu, Huiqun; Zhang, Ruiqian; Li, Gang; Yi, Danqing; Lin, Gaoyong; Guo, Zhen; Liu, Shaoqiang

    2018-06-01

    High-temperature compression deformation of a Zr-4 metal matrix with dispersed coated surrogate nuclear fuel particles was investigated at 750 °C-950 °C with a strain rate of 0.01-1.0 s-1 and height reduction of 20%. Scanning electron microscopy was utilized to investigate the influence of the deformation conditions on the microstructure of the composite and damage to the coated surrogate fuel particles. The results indicated that the flow stress of the composite increased with increasing strain rate and decreasing temperature. The true stress-strain curves showed obvious serrated oscillation characteristics. There were stable deformation ranges at the initial deformation stage with low true strain at strain rate 0.01 s-1 for all measured temperatures. Additionally, the coating on the surface of the surrogate nuclear fuel particles was damaged when the Zr-4 matrix was deformed at conditions of high strain rate and low temperature. The deformation stability was obtained from the processing maps and microstructural characterization. The high-temperature deformation activation energy was 354.22, 407.68, and 433.81 kJ/mol at true strains of 0.02, 0.08, and 0.15, respectively. The optimum deformation parameters for the composite were 900-950 °C and 0.01 s-1. These results are expected to provide guidance for subsequent determination of possible hot working processes for this composite.

  6. New developments in geometric dynamic recrystallization

    Kassner, M.E.; Barrabes, S.R.

    2005-01-01

    The concept of geometric dynamic recrystallization (GDX) originated in 1980s with work on elevated-temperature deformation aluminum to large strains. In this case, substantial grain refinement occurs through a process of grain elongation and thinning leading to a dramatic increase in grain boundary area. The grain boundaries become serrated as a result of subgrain (low angle) boundary formation. Pinching off and annihilation of high-angle grain boundaries occurs as the original grains thin to about twice the subgrain diameter to and a 'steady-state' structure. This concept has since been carefully verified in pure Al, as well as Al-Mg alloys deforming in the three-power regime. Large strain deformation of Al single crystals is also consistent with the concept. Also, data in the literature on large strain deformation of a bcc iron alloy are consistent with GDX. Recent experiments on α-zirconium show that GDX applies to this hcp metal. Thus, it appears that GDX is a general phenomenon that can lead to grain refinement in the absence of any discontinuous dynamic recrystallization (DRX) or continuous dynamic recrystallization (CDX). A discussion of continuous dynamic recrystallization and geometric necessary boundaries in relation to GDX will also be discussed. This may be particularly relevant to severe plastic deformation such as rolling and equal-channel angular pressing where dramatic increases in the number of high-angle boundaries are observed

  7. Plastic deformation behavior of Fe–Co–B–Si–Nb–Cr bulk metallic glasses under nanoindentation

    Kim, J.T.; Hong, S.H.; Lee, C.H.; Park, J.M.; Kim, T.W.; Lee, W.H.; Yim, H.I.; Kim, K.B.

    2014-01-01

    Highlights: • Additional Cr modulation of atomic structure of Fe-Co-B-Si-Nb BMGs. • An amount of free volume characterized by a combination of nanoindentation and AFM. • Free volume determined by height measurement of AFM after nanoindentation. -- Abstract: In this work, we investigate the effect of Cr addition on thermal properties and indentation behavior of Fe 52 Co 20−x B 20 Si 4 Nb 4 Cr x alloys with x = 0, 1, 3 and 5 at.%, respectively. Among all studied alloys, the Fe 52 Co 17 B 20 Si 4 Nb 4 Cr 3 bulk metallic glass (BMG) exhibits the highest thermal stability with large supercooled liquid region of 40 K and the pronounced plastic deformation features which is serrated flow (pop-in event) and significant pile-up of materials around indents. This demonstrates that the appropriate addition of Cr in Fe-based BMG can induce the internal atomic structure modulation and promote the mechanical softening, which are discussed in terms of free volume concept

  8. Basic research for alloy design of Nb-base alloys as ultra high temperature structural materials; Chokoon kozoyo niobuki gokin no gokin sekkei no tame no kisoteki kenkyu

    Miura, E [Tohoku University, Sendai (Japan); Yoshimi, K; Hanada, S [Tohoku Univ., Sendai (Japan). Research Inst. for Iron, Steel and Other Metals

    1997-02-01

    This paper describes an influence of additional elements on the high temperature deformation behavior of Nb-base solid solution alloys. Highly concentrated solid solution single crystals of Nb-Ta and Nb-Mo alloys were prepared. Compression test and strain rate sudden change test were conducted in the vacuum at temperatures ranging from 77 to 1773 K, to determine the strain rate sensitivity index. Yield stress of the Nb-Ta alloy was similar to that of Nb alloy at temperatures over 0.3{times}T{sub M}, where T{sub M} is fusing point of Nb. While, the yield stress increased with increasing the impurity oxygen concentration at temperatures below 0.3{times}T{sub M}. The yield stress became much higher than that of Nb alloy. The strain rate sensitivity index showed positive values in the whole temperature range. On the other hand, the yield stress of Nb-Mo alloy was higher than that of Nb alloy in the whole temperature range, and increased with increasing the Mo concentration. The strain rate sensitivity index showed negative values at the temperature range from 0.3{times}T{sub M} to 0.4{times}T{sub M}. It was found that serration occurred often for Nb-40Mo alloys. 1 ref., 4 figs., 1 tab.

  9. Giant tubular adenoma with malignancy clinical characteristics in a female teenager: Case report and a review of the literature.

    Mărginean, Cristina Oana; Mărginean, Maria Oana; Simu, Iunius; Horvath, Adrienne; Meliţ, Lorena Elena

    2016-10-01

    Adenomas of the colon are usually benign tumors which carry a tendency for malignancy. These tumors can be villous, tubular, tubulovillous, or sessile serrated. Those with adenomatous structure can develop malignant characteristics in 1.5% to 9.4% of cases. We present a case report of a 16-year-old female adolescent with an adenoma of the descending colon. History revealed prolonged diarrheic syndrome for the past 6 months, repeated headache, and a weight loss of ∼5 kg in the past month. One week before the admission, the patient presented an episode of inferior digestive hemorrhage. On admission laboratory tests revealed iron deficiency anemia, and a mildly increased erythrocyte sedimentation rate. The abdominal ultrasound revealed an inhomogeneous mass of the descending colon and 2 hyperechoic lesions in the liver. The colonoscopy showed a tumor of the descending colon, a tubular adenoma according to the pathological examination. Additionally, we noted an atypical presentation of the tumor and the signs of mild dysplasia identified at the pathological examination. Weight loss, bowel transit alterations, loss of appetite, and inferior hemorrhage in an adolescent can be symptoms of a benign or malignant tumor of the colon.

  10. Habitat-specific foraging strategies in Australasian gannets

    Melanie R. Wells

    2016-07-01

    Full Text Available Knowledge of top predator foraging adaptability is imperative for predicting their biological response to environmental variability. While seabirds have developed highly specialised techniques to locate prey, little is known about intraspecific variation in foraging strategies with many studies deriving information from uniform oceanic environments. Australasian gannets (Morus serrator typically forage in continental shelf regions on small schooling prey. The present study used GPS and video data loggers to compare habitat-specific foraging strategies at two sites of contrasting oceanographic regimes (deep water near the continental shelf edge, n=23; shallow inshore embayment, n=26, in south-eastern Australia. Individuals from the continental shelf site exhibited pelagic foraging behaviours typical of gannet species, using local enhancement to locate and feed on small schooling fish; in contrast only 50% of the individuals from the inshore site foraged offshore, displaying the typical pelagic foraging strategy. The remainder adopted a strategy of searching sand banks in shallow inshore waters in the absence of conspecifics and other predators for large, single prey items. Furthermore, of the individuals foraging inshore, 93% were male, indicating that the inshore strategy may be sex-specific. Large inter-colony differences in Australasian gannets suggest strong plasticity in foraging behaviours, essential for adapting to environmental change.

  11. CT diagnosis of thyroid carcinoma

    Luo Dehong; Shi Mulan; Luo Douqiang

    1998-01-01

    Purpose: To study the CT appearances of thyroid carcinoma and its cervical metastatic lymphadenopathy, as well as to evaluate the diagnostic criteria of tumor invasion of adjacent structures. Methods: CT findings of surgery and pathology proved thyroid carcinoma in 52 patients were analyzed. Results: All of the primary tumor were heterogeneous in density, 32 tumors (82.5%) were ill-defined. Fine granular calcifications were revealed in 11 primary tumors and metastatic lymph nodes in 5 cases. Cystic formation with intracystic high density papillary-like nodules were found in 4 primary tumors and metastatic lymphadenopathy in 5 cases. Trachea, esophagus and carotic artery invasion were proved by surgery in 22, 21 and 10 cases respectively. Serrated inner wall and tumor nodule protrusion into tracheal lumen were the definite signs of trachea invasion. Use tumor encasement over 1/2 of the circumference of esophagus and 1/3 of the circumference of carotid artery as the diagnostic criterion of invasion, sensitivity was 71.4%, 100.0% specificity was 96.3%, 95.2% respectively. Conclusion: Fine granular calcification and cystic formation with high attenuation intracystic papillary-like nodules were characteristic manifestations of primary thyroid carcinoma (especially papillary carcinoma) and its metastatic lymphadenopathy as well. Contrast enhanced CT scan is helpful in the diagnosis of thyroid carcinoma and the delineation of tumor extent, which is very important in surgical planning

  12. Analysis for prognostic factors of radiotherapy for esophageal squamous cell carcinoma

    Nakano, Takashi; Ito, Jun; Ito, Ichiro; Yamanaka, Mikio; Suto, Hisao; Mitsuhashi, Norio; Niibe, Hideo

    1984-01-01

    Two hundred and fifty patients with squamous cell carcinoma of the esophagus were treated at our department from 1969 to 1981 with radiotherapy involving radiation alone and pre-and/or post-operative radiotherapy. For 167 patients receiving radiotherapy alone, 144 were inoperable cases and only 60 patients could be radically treated. The others were palliative treated patients because of the locally advanced state or distant metastases or severe complications. For 83 patients receiving pre-and/or post-operative radiotherapy, 62 were radically treated. Results of radiotherapy were analyzed to elucidate factors responsible for these prognosis. Relative 5 years survival rates for radically treated patients were 26% in radiotherapy alone and 20% in pre-and/or post-operative radiotherapy respectively. In radiotherapy alone, quite a good prognoses could be obtained in the patients with tumors less than 5cm at radiografical finding (42% for 5 yrs), with tumors located in Ei, Ea esophagus (40%), with tumors of serrative and tumorous X-P types (48%, 43%, respectively) and with good radiation response at the end of radiotherapy (54%). From the analysis of 12 patients surviving more than 5 years from onset of treatment, not only tumor size less than 5cm but also radiation response was major factor responsible for the prognosis. It might be important to treat patients precisely according to their own clinical characteristics and considering tumor host relationship. (author)

  13. Plastic deformation behavior of Fe–Co–B–Si–Nb–Cr bulk metallic glasses under nanoindentation

    Kim, J.T.; Hong, S.H.; Lee, C.H. [HMC, Faculty of Nanotechnology and Advanced Materials Engineering, Sejong University, 98 Gunja-dong, Gwangjin-gu, Seoul 143-747 (Korea, Republic of); Park, J.M., E-mail: jinman_park@hotmail.com [Materials Research Center, Samsung Advanced Institute of Technology (SAIT), San 14-1, Nongseo-dong, Giheung-gu, Yongin-si, Gyeonggi-do 446-712 (Korea, Republic of); Kim, T.W.; Lee, W.H. [HMC, Faculty of Nanotechnology and Advanced Materials Engineering, Sejong University, 98 Gunja-dong, Gwangjin-gu, Seoul 143-747 (Korea, Republic of); Yim, H.I. [Department of Physics, Sookmyung Women’s University, Hyochangwongil 52, Yongsan-ku, Seoul 140-742 (Korea, Republic of); Kim, K.B., E-mail: kbkim@sejong.ac.kr [HMC, Faculty of Nanotechnology and Advanced Materials Engineering, Sejong University, 98 Gunja-dong, Gwangjin-gu, Seoul 143-747 (Korea, Republic of)

    2014-02-25

    Highlights: • Additional Cr modulation of atomic structure of Fe-Co-B-Si-Nb BMGs. • An amount of free volume characterized by a combination of nanoindentation and AFM. • Free volume determined by height measurement of AFM after nanoindentation. -- Abstract: In this work, we investigate the effect of Cr addition on thermal properties and indentation behavior of Fe{sub 52}Co{sub 20−x}B{sub 20}Si{sub 4}Nb{sub 4}Cr{sub x} alloys with x = 0, 1, 3 and 5 at.%, respectively. Among all studied alloys, the Fe{sub 52}Co{sub 17}B{sub 20}Si{sub 4}Nb{sub 4}Cr{sub 3} bulk metallic glass (BMG) exhibits the highest thermal stability with large supercooled liquid region of 40 K and the pronounced plastic deformation features which is serrated flow (pop-in event) and significant pile-up of materials around indents. This demonstrates that the appropriate addition of Cr in Fe-based BMG can induce the internal atomic structure modulation and promote the mechanical softening, which are discussed in terms of free volume concept.

  14. Piscivory in the feathered dinosaur Microraptor.

    Xing, Lida; Persons, W Scott; Bell, Phil R; Xu, Xing; Zhang, Jianping; Miyashita, Tetsuto; Wang, Fengping; Currie, Philip J

    2013-08-01

    The largest specimen of the four-winged dromaeosaurid dinosaur Microraptor gui includes preserved gut contents. Previous reports of gut contents and considerations of functional morphology have indicated that Microraptor hunted in an arboreal environment. The new specimen demonstrates that this was not strictly the case, and offers unique insights into the ecology of nonavian dinosaurs early in the evolution of flight. The preserved gut contents are composed of teleost fish remains. Several morphological adaptations of Microraptor are identified as consistent with a partially piscivorous diet, including dentition with reduced serrations and forward projecting teeth on the anterior of the dentary. The feeding habits of Microraptor can now be understood better than that of any other carnivorous nonavian dinosaur, and Microraptor appears to have been an opportunistic and generalist feeder, able to exploit the most common prey in both the arboreal and aquatic microhabitats of the Early Cretaceous Jehol ecosystem. © 2013 The Author(s). Evolution © 2013 The Society for the Study of Evolution.

  15. Species differences in the sensitivity of avian embryos to methylmercury

    Heinz, G.H.; Hoffman, D.J.; Klimstra, J.D.; Stebbins, K.R.; Kondrad, S.L.; Erwin, C.A.

    2009-01-01

    We injected doses of methylmercury into the air cells of eggs of 26 species of birds and examined the dose-response curves of embryo survival. For 23 species we had adequate data to calculate the median lethal concentration (LC50). Based on the dose-response curves and LC50s, we ranked species according to their sensitivity to injected methylmercury. Although the previously published embryotoxic threshold of mercury in game farm mallards (Anas platyrhynchos) has been used as a default value to protect wild species of birds, we found that, relative to other species, mallard embryos are not very sensitive to injected methylmercury; their LC50 was 1.79 ug/g mercury on a wet-weight basis. Other species we categorized as also exhibiting relatively low sensitivity to injected methylmercury (their LC50s were 1 ug/g mercury or higher) were the hooded merganser (Lophodytes cucullatus), lesser scaup (Aythya affinis), Canada goose (Branta canadensis), double-crested cormorant (Phalacrocorax auritus), and laughing gull (Larus atricilla). Species we categorized as having medium sensitivity (their LC50s were greater than 0.25 ug/g mercury but less than 1 ug/g mercury) were the clapper rail (Rallus longirostris), sandhill crane (Grus canadensis), ring-necked pheasant (Phasianus colchicus), chicken (Gallus gallus), common grackle (Quiscalus quiscula), tree swallow (Tachycineta bicolor), herring gull (Larus argentatus), common tern (S terna hirundo), royal tern (Sterna maxima), Caspian tern (Sterna caspia), great egret (Ardea alba), brown pelican (Pelecanus occidentalis), and anhinga (Anhinga anhinga). Species we categorized as exhibiting high sensitivity (their LC50s were less than 0.25 ug/g mercury) were the American kestrel (Falco sparverius), osprey (Pandion haliaetus), white ibis (Eudocimus albus), snowy egret (Egretta thula), and tri-colored heron (Egretta tricolor). For mallards, chickens, and ring-necked pheasants (all species for which we could compare the toxicity of our

  16. Effect of the surface treatment of plain carbon fiber posts on the retention of the composite core: an in vitro evaluation Efeito do tratamento superficial de pinos de fibra de carbono lisos na retenção da resina de preenchimento: uma avaliação in vitro

    Adriana Ferreira QUINTAS

    2001-03-01

    Full Text Available This study aims to evaluate the role of surface treatments performed on plain carbon fiber posts, in relation to serrated carbon fiber posts, in the retention of the composite core. Fifty carbon fiber posts received surface treatments in order to verify their influence on the retention of the core material. An acrylic resin mold was developed in order to precisely fit the post, leaving a machined space to accommodate a self-curing composite resin. After the surface treatment, a primer was applied on the coronal portion of all posts, which were then dried. They were fitted to the mold and received a 3 mm composite core. All specimens were thermocycled and then stored in distilled water for a week. Tension test was performed at a speed of 0.5 mm/min until there was lack of adhesion or fracture of the core. The conclusions were: a the values of retention related to aluminum oxide spray (group A, depth cutter diamond burs (group C and posts with machined coronal portion (group D were comparable to those of serrated posts (group E, although no statistically significant difference between these groups was found; b the mean values of core retention in group B (medium grit diamond burs were statistically lower than those of other groups.Foi avaliado o possível efeito de tratamentos superficiais em pinos de fibra de carbono lisos, quando comparados aos pinos serrilhados, na retenção à resina composta empregada na confecção de núcleos de preenchimento. Foram utilizados cinqüenta pinos de fibra de carbono, divididos em cinco grupos: os quatro primeiros grupos eram constituídos por pinos do tipo liso, cujas superfícies foram tratadas, e o último grupo por dez pinos do tipo serrilhado. Foram desenvolvidas matrizes de resina acrílica com um leito ajustado para conter o pino, com um alargamento na porção coronária para posterior preenchimento com resina composta. Após o tratamento superficial, todos os pinos receberam camadas de "primer", foram

  17. Fucosylation Deficiency in Mice Leads to Colitis and Adenocarcinoma

    Wang, Yiwei; Huang, Dan; Chen, Kai-Yuan; Cui, Min; Wang, Weihuan; Huang, Xiaoran; Awadellah, Amad; Li, Qing; Friedman, Ann; Xin, William W.; Di Martino, Luca; Cominelli, Fabio; Miron, Alex; Chan, Ricky; Fox, James; Xu, Yan; Shen, Xiling; Kalady, Mathew F.; Markowitz, Sanford; Maillard, Ivan; Lowe, John B.; Xin, Wei; Zhou, Lan

    2016-01-01

    Background & Aims De novo synthesis of GDP-fucose, a substrate for fucosylglycans, requires sequential reactions mediated by GDP-mannose 4,6-dehydratase (GMDS) and GDP-4-keto-6-deoxymannose 3,5-epimerase-4-reductase (FX or TSTA3). GMDS deletions and mutations are found in 6%–13% of colorectal cancers; these mostly affect ascending and transverse colon. We investigated whether lack of fucosylation consequent to loss of GDP-fucose synthesis contributes to colon carcinogenesis. Methods FX deficiency and GMDS deletion produce the same biochemical phenotype of GDP-fucose deficiency. We studied a mouse model of fucosylation deficiency (Fx–/– mice) and mice with the full-length Fx gene (controls). Mice were placed on standard chow or fucose-containing diet (equivalent to a control fucosylglycan phenotype). Colon tissues were collected and analyzed histologically or by ELISAs to measure cytokine levels; T cells were also collected and analyzed. Fecal samples were analyzed by 16s rRNA sequencing. Mucosal barrier function was measured by uptake of fluorescent dextran. We transplanted bone marrow cells from Fx–/– or control mice (Ly5.2) into irradiated 8-week old Fx–/– or control mice (Ly5.1). We performed immunohistochemical analyses for expression of Notch and the hes family bHLH transcription factor (HES1) in colon tissues from mice and a panel of 60 human colorectal cancer specimens (27 left-sided, 33 right-sided). Results Fx–/– mice developed colitis and serrated-like lesions. The intestinal pathology of Fx–/– mice was reversed by addition of fucose to the diet, which restored fucosylation via a salvage pathway. In the absence of fucosylation, dysplasia appeared and progressed to adenocarcinoma in up to 40% of mice, affecting mainly the right colon and cecum. Notch was not activated in Fx–/– mice fed standard chow, leading to decreased expression of its target Hes1. Fucosylation deficiency altered the composition of the fecal microbiota, reduced

  18. Effect of microstructure on high-temperature mechanical behavior of nickel-base superalloys for turbine disc applications

    Sharpe, Heather Joan

    2007-05-01

    Engineers constantly seek advancements in the performance of aircraft and power generation engines, including, lower costs and emissions, and improved fuel efficiency. Nickel-base superalloys are the material of choice for turbine discs, which experience some of the highest temperatures and stresses in the engine. Engine performance is proportional to operating temperatures. Consequently, the high-temperature capabilities of disc materials limit the performance of gas-turbine engines. Therefore, any improvements to engine performance necessitate improved alloy performance. In order to take advantage of improvements in high-temperature capabilities through tailoring of alloy microstructure, the overall objectives of this work were to establish relationships between alloy processing and microstructure, and between microstructure and mechanical properties. In addition, the projected aimed to demonstrate the applicability of neural network modeling to the field of Ni-base disc alloy development and behavior. The first phase of this work addressed the issue of how microstructure varies with heat treatment and by what mechanisms these structures are formed. Further it considered how superalloy composition could account for microstructural variations from the same heat treatment. To study this, four next-generation Ni-base disc alloys were subjected to various controlled heat-treatments and the resulting microstructures were then quantified. These quantitative results were correlated to chemistry and processing, including solution temperature, cooling rate, and intermediate hold temperature. A complex interaction of processing steps and chemistry was found to contribute to all features measured; grain size, precipitate distribution, grain boundary serrations. Solution temperature, above a certain threshold, and cooling rate controlled grain size, while cooling rate and intermediate hold temperature controlled precipitate formation and grain boundary serrations. Diffusion

  19. Fucosylation Deficiency in Mice Leads to Colitis and Adenocarcinoma.

    Wang, Yiwei; Huang, Dan; Chen, Kai-Yuan; Cui, Min; Wang, Weihuan; Huang, Xiaoran; Awadellah, Amad; Li, Qing; Friedman, Ann; Xin, William W; Di Martino, Luca; Cominelli, Fabio; Miron, Alex; Chan, Ricky; Fox, James G; Xu, Yan; Shen, Xiling; Kalady, Mathew F; Markowitz, Sanford; Maillard, Ivan; Lowe, John B; Xin, Wei; Zhou, Lan

    2017-01-01

    De novo synthesis of guanosine diphosphate (GDP)-fucose, a substrate for fucosylglycans, requires sequential reactions mediated by GDP-mannose 4,6-dehydratase (GMDS) and GDP-4-keto-6-deoxymannose 3,5-epimerase-4-reductase (FX or tissue specific transplantation antigen P35B [TSTA3]). GMDS deletions and mutations are found in 6%-13% of colorectal cancers; these mostly affect the ascending and transverse colon. We investigated whether a lack of fucosylation consequent to loss of GDP-fucose synthesis contributes to colon carcinogenesis. FX deficiency and GMDS deletion produce the same biochemical phenotype of GDP-fucose deficiency. We studied a mouse model of fucosylation deficiency (Fx-/- mice) and mice with the full-length Fx gene (controls). Mice were placed on standard chow or fucose-containing diet (equivalent to a control fucosylglycan phenotype). Colon tissues were collected and analyzed histologically or by enzyme-linked immunosorbent assays to measure cytokine levels; T cells also were collected and analyzed. Fecal samples were analyzed by 16s ribosomal RNA sequencing. Mucosal barrier function was measured by uptake of fluorescent dextran. We transplanted bone marrow cells from Fx-/- or control mice (Ly5.2) into irradiated 8-week-old Fx-/- or control mice (Ly5.1). We performed immunohistochemical analyses for expression of Notch and the hes family bHLH transcription factor (HES1) in colon tissues from mice and a panel of 60 human colorectal cancer specimens (27 left-sided, 33 right-sided). Fx-/- mice developed colitis and serrated-like lesions. The intestinal pathology of Fx-/- mice was reversed by addition of fucose to the diet, which restored fucosylation via a salvage pathway. In the absence of fucosylation, dysplasia appeared and progressed to adenocarcinoma in up to 40% of mice, affecting mainly the right colon and cecum. Notch was not activated in Fx-/- mice fed standard chow, leading to decreased expression of its target Hes1. Fucosylation deficiency

  20. Partial melting of UHP calc-gneiss from the Dabie Mountains

    Liu, Penglei; Wu, Yao; Liu, Qiang; Zhang, Junfeng; Zhang, Li; Jin, Zhenmin

    2014-04-01

    Exhumation melting has been proposed for the ultra-high pressure (UHP) metamorphic rocks in the Dabie Mountains based on melting experiments. We document here the first petrological and mineralogical evidence demonstrating that the UHP calc-gneisses from the Ganjialing area in the Dabie Mountains experienced partial melting during early exhumation. The assemblage of garnet, phengite (Si = 3.65 pfu), coesite, rutile and carbonate preserved in the calc-gneisses indicates a peak metamorphic condition of 692-757 °C and 4.0-4.8 GPa. Partial melting is indicated by several lines of evidence: the melting textures of phengite, the feldspar-dominated films, bands, branches, blebs and veins, the euhedral K-feldspars, the intergrowth film of plagioclase and K-feldspar, the plagioclase + biotite intergrowth after garnet and the epidote poikiloblasts. Polyphase inclusions in garnet are characterized with wedge-like offshoots and serrate outlines whereas those in epidote display negative crystal shapes, which can be best interpreted by entrapment of former melts. We propose a wet melting reaction of Phn + Q ± Na-Cpx + H2O = Bt + Pl + Grt + felsic melts, which likely took place at ca.650-800 °C and ca.1.0-2.0 GPa, to interpret the melting event in the calc-gneisses. Chemical exchanges between garnet and melts produced new garnet domains with higher almandine, spessartine, MREE, HREE and Y but lower grossular, pyrope, P, Sc, Ti, V and Zr contents. Zr-in-rutile thermometer reveals a low temperature of 620-643 °C at 5 GPa, indicating a later reset for Zr in rutile. Healed fractures are suggested to be responsible for the formation of some polyphase inclusions in garnet.

  1. The elevated temperature tensile properties of S-200E commercially pure beryllium

    Henshall, G.A.; Torres, S.G.; Hanafee, J.E.

    1995-01-01

    The tensile properties of commercially pure beryllium are sensitive to temperature, impurity content, texture, grain size, and prior processing. Therefore, tensile tests have been conducted using the commercially pure S-200E Be commonly employed at Lawrence Livermore National Laboratory. These experiments were performed at temperatures ranging from 300 to 1100 degrees C in the longitudinal and transverse orientations at the quasi-static strain rate of 5.5 x 10 -4 s -1 . The results of these experiments reveal that the stress-strain curve is smooth, ie. without yield points or serrations, over the entire temperature range studied. The yield stress (YS) and ultimate tensile stress (UTS) decrease monotonically with increasing temperature. Similar strengths were measured for both the longitudinal and transverse orientations, with the latter exhibiting slightly lower YS and UTS values. The measured failure elongation (e f ) vs. temperature curve is complex due to the competing effects of increasing basal-plane fracture stress with increasing temperature combined with the presence of hot shortness at intermediate temperatures. The latter is believed to be caused, at least partially, by the presence of free aluminum impurities at the grain boundaries. This hypothesis is supported by the measured increase in e f at 700 degrees C following a 100-hr anneal at 750 degrees C, which would remove free Al from the grain boundaries. Texture also was found to influence e f . The favorable orientation of the basal planes for initiation and propagation of cleavage cracks in longitudinal specimens results in a significantly decreased failure elongation compared with the transverse orientation. The effects of testing temperature and specimen orientation on the reduction in area were found to be similar to those described for e f

  2. Tensile properties of strip casting 6.5 wt% Si steel at elevated temperatures

    Li, Hao-Ze, E-mail: lhzqq83@163.com; Liu, Zhen-Yu, E-mail: zyliu@mail.neu.edu.cn

    2015-07-15

    Tensile behaviors of strip casting 6.5 wt% Si steel are tested at elevated temperatures ranging from 300 °C to 800 °C. A detailed study of the morphology of the fracture surface and the ordered phase at each deforming temperature is carried out by a scanning electron microscope and a transmission electron microscope. The results show that the deforming temperature rather than the ordered degree determines the tensile properties. As the deforming temperature increases, the stress level in the whole deforming stage continually decreases, whereas the elongation gradually increases. The ductile–brittle transition occurs around 350 °C. The elongation of 2% at 300 °C rapidly increases up to 16.4% at 350 °C and the corresponding fracture mode transforms from the complete cleavage fracture to the mixture of the very limited cleavage fracture, intergranular dimple fracture and the dimple fracture. Serrated flow is observed at 350 °C and 400 °C probably due to the occurrence of dynamic strain aging. Due to the gradually weakened grain boundary cohesion with the deforming temperature increasing, intergranular dimple pattern dominates the fracture surface at 600 °C and the elongation slowly increases from 16.4% at 350 °C to 22.8% at 600 °C. At 700 °C and 800 °C, the much more enhanced dynamic recovery, the substantially decreased stress levels which contribute to the inhibition of the intergranular dimple fracture, the much lower content of the B2 ordered phase at 700 °C, and the completely disordered state at 800 °C give rise to the dramatically improved elongations of 88.8% and 130.8%, respectively.

  3. Oxidation assisted intergranular cracking under loading at dynamic strain aging temperatures in Inconel 718 superalloy

    Rezende, M.C., E-mail: monica_crezende@hotmail.com [Universidade Federal do Rio de Janeiro, Departamento de Engenharia Metalúrgica e de Materiais, C.P. 68505, Rio de Janeiro 21945-970 (Brazil); Araújo, L.S.; Gabriel, S.B. [Universidade Federal do Rio de Janeiro, Departamento de Engenharia Metalúrgica e de Materiais, C.P. 68505, Rio de Janeiro 21945-970 (Brazil); Dille, J. [Université Libre de Bruxelles, 4MAT Department, Av. F. Roosevelt 50, C.P. 194/03, Brussels (Belgium); Almeida, L.H. de [Universidade Federal do Rio de Janeiro, Departamento de Engenharia Metalúrgica e de Materiais, C.P. 68505, Rio de Janeiro 21945-970 (Brazil)

    2015-09-15

    Highlights: • Mechanical properties are controlled by DSA, precipitation hardening and OAIC. • Between 600 and 700 °C the critical strain for serrations increases with temperature. • This is related to the consumption of matrix elements (especially Nb: for γ′ and γ″). • A reduction in ductility occurs (related to the OAIC) when the DSA is no longer effective. • This reduction is accompanied by an increase in intergranular brittle fracture. - Abstract: It is well established that 718 superalloy exhibits brittle intergranular cracking when deformed under tension at temperatures above 600 °C. This embrittlement effect is related with grain boundary penetration by oxygen (Oxygen Assisted Intergranular Cracking – OAIC). Simultaneously, impacting on its mechanical properties, the precipitation of coherent γ′ and γ″ phases occur above 650 °C and Dynamic Strain Aging (DSA) occurs in the temperature range between 200 and 800 °C. Although literature indicates that OAIC is the mechanism that controls mechanical properties at high temperatures, its interactions with DSA and precipitation are still under discussion. The objective of this work is to investigate the interactions between the embrittlement phenomena (OAIC and DSA) and the hardening mechanism of γ′ and γ″ precipitation on the mechanical properties of an annealed 718 superalloy. Tensile tests were performed at a strain rate of 3.2 × 10{sup −4} s{sup −1} under secondary vacuum, in temperatures ranging from 200 to 800 °C. Fracture surfaces were observed by scanning electron microscopy (SEM) and precipitation by transmission electron microscopy (TEM). The effect of DSA and precipitation on the strength and of OAIC on the ductility was verified.

  4. Stress/strain characteristics of Cu alloy sheath in situ processed MgB2 superconducting wires

    Katagiri, Kazumune; Kasaba, Koichi; Shoji, Yoshitaka

    2005-01-01

    The mechanical properties of copper and copper alloy (Cu-Zr, Cu-Be and Cu-Cr) sheath in situ PIT-processed MgB 2 superconducting wires were studied at room temperature (RT) and 4.2 K. The effects of stress-strain on the critical current (I c ) of the wires have also been studied at 4.2 K and in magnetic fields up to 5 T. It has been clarified that alloying the Cu sheath significantly increases the yield and flow stresses of the wires at both RT and 4.2 K. The 0.5% flow stresses of the Cu alloy sheath wire were 147-237 MPa, whereas that of Cu was 55 MPa. At RT, serration corresponding to multiple cracking was observed around a strain of 0.4% and the stress-strain curves saturated beyond that point. The strain dependence of I c prior to the critical strain (ε irr ) was different depending on the magnetic field; being almost constant at 2 T and increasing with strain at 5 T. The I c decreased beyond ε irr , which is much larger for Cu alloy sheath wires as compared to Cu sheath wire. This is due to the difference in the residual compressive strain in the MgB 2 core during cooling from the heat-treatment temperature to 4.2 K, which is determined through relaxation by yielding in the sheath materials. The transverse compression tests revealed that the I c of the Cu alloy sheath wire did not degrade up to 314 MPa, which is also higher than that of Cu sheath wire. (author)

  5. Review of the enigmatic Eocene shark genus Xiphodolamia (Chondrichthyes, Lamniformes) and description of a new species recovered from Angola, Iran and Jordan

    Adnet, S.; Hosseinzadeh, R.; Antunes, M. T.; Balbino, A. C.; Kozlov, V. A.; Cappetta, H.

    2009-10-01

    Little is known about the extinct Xiphodolamia, a peculiar lamnid shark which inhabited the Eocene seas. The reexamination of a large set of fossilized teeth specimens from the Ypresian of Kazakhstan has enabled the reconstitution of the tooth series of this enigmatic taxa of lamnid shark. Five distinct tooth morphologies seem to occur in X. ensis Leidy [Leidy, J., 1877. Description of vertebrate remains, chiefly from the phosphate beds of South Carolina. Journal of the Academy of Natural Sciences of Philadelphia 8, 209-261] species revealing a weak ontogenetic variation. Such specific variation in tooth shape means that the other described species may be their junior synonyms. Dental morphology perfectly conforms with a Lamniforme but does not prove the current attribution to the Lamnidae family due to some inconsistent dental features observed, such as the presence of symphysial teeth. This genus could be regarded as an old lineage branched from the stem group of Lamnidae, close to the Isuroids sharks. Several Xiphodolamia teeth, originating both from old collections and new acquisitions, are reported and illustrated in order to provide information about a new species described here: Xiphodolamia serrata nov. sp. This species, currently limited to deposits in Angola, Jordan and Iran and dated at the Late Eocene, is easily distinguishable from the Early-Middle Eocene material belonging to the genus by the presence of serrated cutting edges. Adding to the type species considered here as the only valid taxa during the Early-Middle Eocene period, the temporal range of this genus extends to the Late Eocene, thus setting its upper stratigraphic limit prior to its disappearance as enigmatic as its appearance in the Early Eocene was.

  6. Underwater colorectal EMR: remodeling endoscopic mucosal resection.

    Curcio, Gabriele; Granata, Antonino; Ligresti, Dario; Tarantino, Ilaria; Barresi, Luca; Liotta, Rosa; Traina, Mario

    2015-05-01

    Underwater EMR (UEMR) has been reported as a new technique for the removal of large sessile colorectal polyps without need for submucosal injection. To evaluate (1) outcomes of UEMR, (2) whether UEMR can be easily performed by an endoscopist skilled in traditional EMR without specific dedicated training in UEMR, and (3) whether EUS is required before UEMR. Prospective, observational study. Single, tertiary-care referral center. Underwater EMR. Complete resection and adverse events. A total of 72 consecutive patients underwent UEMR of 81 sessile colorectal polyps. EUS was performed before UEMR in 9 cases (11.1%) with a suspicious mucosal/vascular pattern. The mean polyp size was 18.7 mm (range 10-50 mm); the mean UEMR time was 11.8 minutes. Fifty-five polyps (68%) were removed en bloc, and 26 (32%) were removed with a piecemeal technique. Histopathology consisted of tubular adenomas (25.9%), tubulovillous adenomas (5%), adenomas with high-grade dysplasia (42%), serrated polyps (4.9%), carcinoma in situ (13.6%), and hyperplastic polyps (8.6%). Surveillance colonoscopy was scheduled at 3 months. Complete resection was successful in all patients. No adverse events or recurrence was recorded in any of the patients. Limited follow-up; single-center, uncontrolled study. Interventional endoscopists skilled in conventional EMR performed UEMR without specific dedicated training. EUS may not be required for lesions with no invasive features on high-definition narrow-band imaging. UEMR appears to be an effective and safe alternative to traditional EMR and could eventually improve the way in which we can effectively and safely treat colorectal lesions. Copyright © 2015 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  7. Colorectal cancer screening: results of a 5-year program in asymptomatic subjects at increased risk.

    Pezzoli, A; Matarese, V; Rubini, M; Simoni, M; Caravelli, G C; Stockbrugger, R; Cifalà, V; Boccia, S; Feo, C; Simone, L; Trevisani, L; Liboni, A; Gullini, S

    2007-01-01

    The province of Ferrara has one of the highest incidences of colorectal cancer (CRC) in Italy. In January 2000, we set up a colonoscopy screening program focussing on first-degree relatives of CRC patients. We now report the results 5 years after the beginning of the project. SCREENEES AND METHODS: In October 1999, we started a campaign stressing the usefulness of colonoscopy for the first-degree relatives of CRC patients. Subjects included in the screening program were aged between 45 and 75 years with at least one first-degree relative affected by CRC. They were invited to an interview where a physician suggested colonoscopy as a screening option. In 5 years, 776 subjects were interviewed and 733 (94.4%) agreed to an endoscopic examination (M/F:375/401; mean age 55 years): 562 colonoscopies were performed. Adenomas and cancers were found in 122 (21.7%) and 12 (2.1%) subjects, respectively. Histological examination in 181 persons with lesions (32.8%) showed (most serious lesion quoted) 47 hyperplastic polyps (26% of all lesions), 2 serrated adenomas (1.1%), 68 tubular adenomas (48%), 24 tubulovillous adenomas (13.3%), 9 adenomas with high grade dysplasia (5%) and 12 adenocarcinomas (6.6%). The majority of the cancers were at an early stage (8 Dukes A and 3 Dukes B). Sedation was used in only 42 colonoscopies (7.5%). A colonoscopy-based screening in this selected high-risk population is feasible. Even without sedation subjects readily agreed to the endoscopic procedure. We identified a significant number of advanced neoplasms and cancers at an early stage suggesting that this could be a useful tool in early identification of CRC.

  8. Sexual Size Dimorphism and Body Condition in the Australasian Gannet.

    Lauren P Angel

    Full Text Available Sexual size dimorphism is widespread throughout seabird taxa and several drivers leading to its evolution have been hypothesised. While the Australasian Gannet (Morus serrator has previously been considered nominally monomorphic, recent studies have documented sexual segregation in diet and foraging areas, traits often associated with size dimorphism. The present study investigated the sex differences in body mass and structural size of this species at two colonies (Pope's Eye, PE; Point Danger, PD in northern Bass Strait, south-eastern Australia. Females were found to be 3.1% and 7.3% heavier (2.74 ± 0.03, n = 92; 2.67 ± 0.03 kg, n = 43 than males (2.66 ± 0.03, n = 92; 2.48 ± 0.03 kg, n = 43 at PE and PD, respectively. Females were also larger in wing ulna length (0.8% both colonies but smaller in bill depth (PE: 2.2%; PD: 1.7% than males. Despite this dimorphism, a discriminant function provided only mild accuracy in determining sex. A similar degree of dimorphism was also found within breeding pairs, however assortative mating was not apparent at either colony (R2 < 0.04. Using hydrogen isotope dilution, a body condition index was developed from morphometrics to estimate total body fat (TBF stores, where TBF(% = 24.43+1.94*(body mass/wing ulna length - 0.58*tarsus length (r2 = 0.84, n = 15. This index was used to estimate body composition in all sampled individuals. There was no significant difference in TBF(% between the sexes for any stage of breeding or in any year of the study at either colony suggesting that, despite a greater body mass, females were not in a better condition than males. While the driving mechanism for sexual dimorphism in this species is currently unknown, studies of other Sulids indicate segregation in foraging behaviour, habitat and diet may be a contributing factor.

  9. The roentgenographic findings of achilles tendon rupture

    Seouk, Kang Hyo; Keun, Rho Yong [Shilla General Hospital, Seoul (Korea, Republic of)

    1999-03-01

    To evaluate the diagnostic value of a lateral view of the ankles in Achilles tendon rupture. We performed a retrospective analysis of the roentgenographic findings of 15 patients with surgically proven Achilles tendon rupture. Four groups of 15 patients(normal, ankle sprain, medial lateral malleolar fracture, and calcaneal fracture) were analysed as reference groups. Plain radiographs were reviewed with regard to Kager's triangle, Arner's sign, Toygar's angle, ill defined radiolucent shadow through the Achilles tendon, sharpness of the anterior margin of Achilles tendon, and meniscoid smooth margin of the posterior skin surface of the ankle. Kager's triangle was deformed and disappeared after rupture of the Achilles tendon in nine patients(60%) with operative verification of the rupture, six patients(40%) had a positive Arner's sign, while none had a diminished Toygars angle. In 13 patients(87%) with a ruptured Achilles tendon, the thickness of this was nonuniform compared with the reference group. The anterior margin of the Achilles tendon became serrated and indistinct in 14 patients(93%) in whom this was ruptured. An abnormal ill defined radiolucent shadow through the Achilles tendon was noted in nine patient(60%), and nonparallelism between the anterior margin of the Achilles tendon and posterior skin surface of the ankle was detected in 11 patients(73%). The posterior skin surface of the ankle had a nodular surface margin in 13 patients(87%). A deformed Kager's triangle and Achilles tendon, and an abnormal ill defined radiolucent shadow through the Achilles tendon in a lateral view of the ankles are important findings for the diagnesis of in diagnosing achilles tendon rupture.

  10. The roentgenographic findings of achilles tendon rupture

    Seouk, Kang Hyo; Keun, Rho Yong

    1999-01-01

    To evaluate the diagnostic value of a lateral view of the ankles in Achilles tendon rupture. We performed a retrospective analysis of the roentgenographic findings of 15 patients with surgically proven Achilles tendon rupture. Four groups of 15 patients(normal, ankle sprain, medial lateral malleolar fracture, and calcaneal fracture) were analysed as reference groups. Plain radiographs were reviewed with regard to Kager's triangle, Arner's sign, Toygar's angle, ill defined radiolucent shadow through the Achilles tendon, sharpness of the anterior margin of Achilles tendon, and meniscoid smooth margin of the posterior skin surface of the ankle. Kager's triangle was deformed and disappeared after rupture of the Achilles tendon in nine patients(60%) with operative verification of the rupture, six patients(40%) had a positive Arner's sign, while none had a diminished Toygars angle. In 13 patients(87%) with a ruptured Achilles tendon, the thickness of this was nonuniform compared with the reference group. The anterior margin of the Achilles tendon became serrated and indistinct in 14 patients(93%) in whom this was ruptured. An abnormal ill defined radiolucent shadow through the Achilles tendon was noted in nine patient(60%), and nonparallelism between the anterior margin of the Achilles tendon and posterior skin surface of the ankle was detected in 11 patients(73%). The posterior skin surface of the ankle had a nodular surface margin in 13 patients(87%). A deformed Kager's triangle and Achilles tendon, and an abnormal ill defined radiolucent shadow through the Achilles tendon in a lateral view of the ankles are important findings for the diagnesis of in diagnosing achilles tendon rupture

  11. Morphology of the mouthparts of the spittlebug Philagra albinotata Uhler (Hemiptera: Cercopoidea: Aphrophoridae).

    Wang, Tingting; Pan, Liuxing; Zhang, Yalin; Dai, Wu

    2015-03-01

    Mouthparts associated with feeding behavior and feeding habits are important sensory and feeding structures in insects. To obtain a better understanding of feeding in Cercopoidea, the morphology of mouthparts of the spittlebug, Philagra albinotata Uhler was examined using scanning electron microscopy. The mouthparts of P. albinotata are of the typical piercing-sucking type found in Hemiptera, comprising a cone-shaped labrum, a tube-like, three-segmented labium with a deep groove on the anterior side, and a stylet fascicle consisting of two mandibular and two maxillary stylets. The mandibles consist of a dorsal smooth region and a ventral serrate region near the apical half of the external convex region, and bear five nodules or teeth on the dorsal external convex region on the distal extremity; these are regarded as unique features that distinguish spittlebugs from other groups of Hemiptera. The externally smooth maxillary stylets, interlocked to form a larger food canal and a smaller salivary canal, are asymmetrical only in the internal position of longitudinal carinae and grooves. One dendritic canal is found in each maxilla and one in each mandible. Two types of sensilla trichodea, three types of sensilla basiconica and groups of multi-peg structures occur in different locations on the labium, specifically the labial tip with two lateral lobes divided into anterior sensory fields with ten small peg sensilla arranged in a 5+4+1 pattern and one big peg sensillum, and posterior sensory fields with four sensilla trichodea. Compared with those of previously studied Auchenorrhyncha, the mouthparts of P. albinotata may be distinguished by the shape of the mandibles, the multi-peg structures and a tooth between the salivary canal and the food canal on the extreme end of the stylets. The mouthpart morphology is illustrated using scanning electron micrographs, and the taxonomic and putative functional significance of the different structures is briefly discussed

  12. Low cycle fatigue properties of CLAM steel at 823 K

    Hu, Xue [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); University of Chinese Academy of Sciences, 19 Yuquan Road, Beijing 100049 (China); Huang, Lixin [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Yan, Wei; Wang, Wei [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Sha, Wei [School of Planning, Architecture and Civil Engineering, Queen' s University Belfast, Belfast BT9 5AG (United Kingdom); Shan, Yiyin, E-mail: yyshan@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Yang, Ke, E-mail: kyang@imr.ac.cn [Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China)

    2014-09-08

    China Low Activation Martensitic (CLAM) steel is considered to be the main candidate material for the first wall components of future fusion reactors in China. In this paper, the low cycle fatigue (LCF) behavior of CLAM steel is studied under fully reversed tension–compression loading at 823 K in air. Total strain amplitude was controlled from 0.14% to 1.8% with a constant strain rate of 2.4×10{sup −3} s{sup −1}. The corresponding plastic strain amplitude ranged from 0.023% to 1.613%. The CLAM steel displayed continuous softening to failure at 823 K. The relationship between strain, stress and fatigue life was obtained using the parameters obtained from fatigue tests. The LCF properties of CLAM steel at 823 K followed Coffin–Manson relationship. Furthermore, irregular serration was observed on the stress–strain hysteresis loops of CLAM steel tested with the total strain amplitude of 0.45–1.8%, which was attributed to the dynamic strain aging (DSA) effect. During continuous cyclic deformation, the microstructure and precipitate distribution of CLAM steel changed gradually. Many tempered martensitic laths were decomposed into subgrains, and the size and number of M{sub 23}C{sub 6} carbide and MX carbonitride precipitates decreased with the increase of total strain amplitude. The response cyclic stress promoted the recovery of martensitic lath, while the thermal activation mainly played an important role on the growth of precipitates in CLAM steel at 823 K. In order to have a better understanding of high-temperature LCF behavior, the potential mechanisms controlling stress–strain response, DSA phenomenon and microstructure changes have also been evaluated.

  13. A new machairodont from the Palmetto Fauna (early Pliocene) of Florida, with comments on the origin of the Smilodontini (Mammalia, Carnivora, Felidae).

    Wallace, Steven C; Hulbert, Richard C

    2013-01-01

    South-central Florida's latest Hemphillian Palmetto Fauna includes two machairodontine felids, the lion-sized Machairodus coloradensis and a smaller, jaguar-sized species, initially referred to Megantereon hesperus based on a single, relatively incomplete mandible. This made the latter the oldest record of Megantereon, suggesting a New World origin of the genus. Subsequent workers variously accepted or rejected this identification and biogeographic scenario. Fortunately, new material, which preserves previously unknown characters, is now known for the smaller taxon. The most parsimonious results of a phylogenetic analysis using 37 cranio-mandibular characters from 13 taxa place it in the Smilodontini, like the original study; however, as the sister-taxon to Megantereon and Smilodon. Accordingly, we formally describe Rhizosmilodon fiteae gen. et sp. nov. Rhizosmilodon, Megantereon, and Smilodon ( = Smilodontini) share synapomorphies relative to their sister-taxon Machairodontini: serrations smaller and restricted to canines; offset of P3 with P4 and p4 with m1; complete verticalization of mandibular symphysis; m1 shortened and robust with widest point anterior to notch; and extreme posterior "lean" to p3/p4. Rhizosmilodon has small anterior and posterior accessory cusps on p4, a relatively large lower canine, and small, non-procumbent lower incisors; all more primitive states than in Megantereon and Smilodon. The former also differs from Megantereon and Smilodon gracilis by having a very small mandibular flange. Rhizosmilodon is the oldest known member of the Smilodontini, suggesting that the tribe originated in North America. Two more derived, similar-sized species evolved in parallel during the Blancan, Megantereon hesperus and Smilodon gracilis. The former is rarer, known only from the north-central and northwestern US, and presumably dispersed into the Old World. The latter is known from the eastern and southern US, and dispersed into South America.

  14. A new machairodont from the Palmetto Fauna (early Pliocene of Florida, with comments on the origin of the Smilodontini (Mammalia, Carnivora, Felidae.

    Steven C Wallace

    Full Text Available South-central Florida's latest Hemphillian Palmetto Fauna includes two machairodontine felids, the lion-sized Machairodus coloradensis and a smaller, jaguar-sized species, initially referred to Megantereon hesperus based on a single, relatively incomplete mandible. This made the latter the oldest record of Megantereon, suggesting a New World origin of the genus. Subsequent workers variously accepted or rejected this identification and biogeographic scenario. Fortunately, new material, which preserves previously unknown characters, is now known for the smaller taxon. The most parsimonious results of a phylogenetic analysis using 37 cranio-mandibular characters from 13 taxa place it in the Smilodontini, like the original study; however, as the sister-taxon to Megantereon and Smilodon. Accordingly, we formally describe Rhizosmilodon fiteae gen. et sp. nov. Rhizosmilodon, Megantereon, and Smilodon ( = Smilodontini share synapomorphies relative to their sister-taxon Machairodontini: serrations smaller and restricted to canines; offset of P3 with P4 and p4 with m1; complete verticalization of mandibular symphysis; m1 shortened and robust with widest point anterior to notch; and extreme posterior "lean" to p3/p4. Rhizosmilodon has small anterior and posterior accessory cusps on p4, a relatively large lower canine, and small, non-procumbent lower incisors; all more primitive states than in Megantereon and Smilodon. The former also differs from Megantereon and Smilodon gracilis by having a very small mandibular flange. Rhizosmilodon is the oldest known member of the Smilodontini, suggesting that the tribe originated in North America. Two more derived, similar-sized species evolved in parallel during the Blancan, Megantereon hesperus and Smilodon gracilis. The former is rarer, known only from the north-central and northwestern US, and presumably dispersed into the Old World. The latter is known from the eastern and southern US, and dispersed into South

  15. How Does Temperature Impact Leaf Size and Shape in Four Woody Dicot Species? Testing the Assumptions of Leaf Physiognomy-Climate Models

    McKee, M.; Royer, D. L.

    2017-12-01

    The physiognomy (size and shape) of fossilized leaves has been used to reconstruct the mean annual temperature of ancient environments. Colder temperatures often select for larger and more abundant leaf teeth—serrated edges on leaf margins—as well as a greater degree of leaf dissection. However, to be able to accurately predict paleotemperature from the morphology of fossilized leaves, leaves must be able to react quickly and in a predictable manner to changes in temperature. We examined the extent to which temperature affects leaf morphology in four tree species: Carpinus caroliniana, Acer negundo, Ilex opaca, and Ostrya virginiana. Saplings of these species were grown in two growth cabinets under contrasting temperatures (17 and 25 °C). Compared to the cool treatment, in the warm treatment Carpinus caroliniana leaves had significantly fewer leaf teeth and a lower ratio of total number of leaf teeth to internal perimeter; and Acer negundo leaves had a significantly lower feret diameter ratio (a measure of leaf dissection). In addition, a two-way ANOVA tested the influence of temperature and species on leaf physiognomy. This analysis revealed that all plants, regardless of species, tended to develop more highly dissected leaves with more leaf teeth in the cool treatment. Because the cabinets maintained equivalent moisture, humidity, and CO2 concentration between the two treatments, these results demonstrate that these species could rapidly adapt to changes in temperature. However, not all of the species reacted identically to temperature changes. For example, Acer negundo, Carpinus caroliniana, and Ostrya virginiana all had a higher number of total teeth in the cool treatment compared to the warm treatment, but the opposite was true for Ilex opaca. Our work questions a fundamental assumption common to all models predicting paleotemperature from the physiognomy of fossilized leaves: a given climate will inevitably select for the same leaf physiognomy

  16. The optimally sampled galaxy-wide stellar initial mass function. Observational tests and the publicly available GalIMF code

    Yan, Zhiqiang; Jerabkova, Tereza; Kroupa, Pavel

    2017-11-01

    Here we present a full description of the integrated galaxy-wide initial mass function (IGIMF) theory in terms of the optimal sampling and compare it with available observations. Optimal sampling is the method we use to discretize the IMF deterministically into stellar masses. Evidence indicates that nature may be closer to deterministic sampling as observations suggest a smaller scatter of various relevant observables than random sampling would give, which may result from a high level of self-regulation during the star formation process. We document the variation of IGIMFs under various assumptions. The results of the IGIMF theory are consistent with the empirical relation between the total mass of a star cluster and the mass of its most massive star, and the empirical relation between the star formation rate (SFR) of a galaxy and the mass of its most massive cluster. Particularly, we note a natural agreement with the empirical relation between the IMF power-law index and the SFR of a galaxy. The IGIMF also results in a relation between the SFR of a galaxy and the mass of its most massive star such that, if there were no binaries, galaxies with SFR first time, we show optimally sampled galaxy-wide IMFs (OSGIMF) that mimic the IGIMF with an additional serrated feature. Finally, a Python module, GalIMF, is provided allowing the calculation of the IGIMF and OSGIMF dependent on the galaxy-wide SFR and metallicity. A copy of the python code model is available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/607/A126

  17. A Mudança do Paradigma Repressivo em Segurança Pública: reflexões criminológicas críticas em torno à proposta da 1º Conferência Nacional Brasileira de Segurança Pública

    Vera Regina Pereira de Andrade

    2013-12-01

    Full Text Available http://dx.doi.org/10.5007/2177-7055.2013v34n67p335Neste artigo trata-se do paradigma punitivo de segurança pública vigente no Brasil e sua transformação, no marco proposto pela 1ª Conferência Nacional de Segurança Pública, realizada pelo Ministério da Justiça no Governo Federal de Luiz Inácio Lula da Silva, no período de janeiro de 2008 a agosto de 2009, da qual participou-se em diversos momentos e títulos, seja como integrante da “comissão de especialistas” convidados pelo Ministério da Justiça para assessorar o grupo responsável pela construção do projeto da Conferência, seja na realização da Conferência Livre do Mont Serrat, realizada em Florianópolis. O marco teórico que orienta centralmente a análise é a Criminologia crítica e a argumentação central desenvolvida é a de que para ultrapassar o paradigma repressivo em segurança pública é necessário, em nível ideológico e simbólico, ultrapassar e redefinir os conceitos fundamentais e o senso comum que lhe dão sustentação: criminalidade (identificada com criminalidade de rua e da pobreza, violência (identificada com esta criminalidade e segurança pública (identificada com segurança contra esta criminalidade.

  18. Influence of dynamic strain ageing on tensile strain energy of type 316L(N) austenitic stainless steel

    Isaac Samuel, B.; Choudhary, B.K.; Bhanu Sankara Rao, K.

    2010-01-01

    Tensile tests were conducted on type 316 L(N) stainless steel over a wide temperature range of 300-1123 K employing strain rates ranging from 3.16 X 10 -5 to 3.16 X 10 -3/s . The variation of strain energy in terms of modulus of resilience and modulus of toughness over the wide range of temperatures and strain rates were examined. The variation in modulus of resilience with temperature and strain rate did not show the signatures of dynamic strain ageing (DSA). However, the modulus of toughness exhibited a plateau at the intermediate temperatures of 523-1023 K. Further, the distribution of energy absorbed till necking and energy absorbed from necking till fracture were found to characterise the deformation and damage processes, respectively, and exhibited anomalous variations in the temperature range 523-823 K and 823-1023 K, respectively. In addition to the observed manifestations of DSA such as serrated load-elongation curve, peaks/plateaus in flow stress, ultimate tensile strength and work hardening rate, negative strain rate sensitivity and ductility minima, the observed anomalous variations in modulus of toughness at intermediate temperatures (523-1023 K) can be regarded as yet another key manifestation of DSA. At temperatures above 1023 K, a sharp decrease in the modulus of toughness and also in the strain energies up to necking and from necking to fracture observed, with increasing temperature and decreasing strain rate, reveal the onset of dynamic recovery leading to early cross slip and climb processes. (author)

  19. Effect of Y addition on the aging hardening behavior and precipitation evolution of extruded Mg-Al-Zn alloys

    Ren, L.B. [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Quan, G.F., E-mail: quangf@home.swjtu.edu.cn [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhou, M.Y.; Guo, Y.Y.; Jiang, Z.Z.; Tang, Q. [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China)

    2017-04-06

    Abstract:: The 443 K aging hardening behavior and microstructure evolution of extruded Mg-Al-Zn-Y alloys was investigated in aspects of yttrium (Y) content (0.2–0.8 wt%), holding time (0.5–156 h) and the initial states (as-extruded, solution treated). The grain size, precipitation evolution, phases and chemical composition were characterized by the optical microscope, scanning electron microscope, X-ray diffraction, and energy dispersive spectrometer, respectively. The corresponding mechanical response, including the hardness, uniaxial tensile strength were measured with the Vickers hardness tester and universal testing machine, respectively. The results show that, firstly, there is reversal hardness anisotropy between extrusion direction and normal direction in as-extruded Mg-Al-Zn-Y sheets compared with T5 treated ones. Secondly, the short-term aging softening exist at the beginning of T5 treatment which results in a lower hardness even be close to that of solution treated ones, but not for T6 conditions. Thirdly, the suppression of discontinuous precipitation during the aging treatment become more remarkable with increasing Y addition which because of the reduction of diffusional coherency strain near grain boundary, increasing activation energy for the discontinuous precipitates (β-Mg{sub 17}Al{sub 12} phase, DPs) formation and the dilution region of Al near the Al{sub 2}Y. Serrated GBs can also provide more nucleation sites for DPs and lead to relatively more precipitates during T5 treatment. Moreover, the proportional precipitation strengthening in yield strength and hardness was verified in Mg-Al-Zn-Y alloy during the aging process.

  20. The use of potential drop techniques for the evaluation of environment assisted cracking of austenitic alloys

    Lidar, P.; Hwang, I.S.; Ballinger, R.G.

    1992-01-01

    The DC potential drop technique has been adapted for strain measurements. An AC potential drop technique has been developed for crack detection. It has been demonstrated that a DC with switched polarity can have a strain accuracy of ±0.12% after yielding and a multi-frequency AC system with up to 200 kHz frequency can have a sensitivity of 50 μm for crack detection. The techniques have been applied to environment assisted cracking tests of Ni-Cr-Fe alloys in 350 degrees C water and austenitic stainless steel in 288 degrees C water using both static and dynamic loading. Long term signal stability is maintained given: (1) rigid probe attachments; (2) local preamplification; and (3) adequate lead grounding and shielding. The AC potential drop technique is found to be more suitable for constant load than for dynamic loading and is also compatible with aggressive environments. During dynamic loading, sensitivity can be significantly reduced due to serrated yielding. An analytical model has been developed to predict the DC and AC potential drops in a round bar geometry. A sensitivity analysis has been made to determine test to test variation associated with variations in supplied current, specimen dimensions, and probe spacing. Multifrequency analysis shows that the measured data agrees with the prediction at frequencies up to about 100 kHz. Above 100 kHz induced signal in the probes results in increases in potential drop and phase angle. The induced signal is reproducible and therefore may be related to the crack mouth opening displacement

  1. Value of computed tomography in diagnosis of intestinal diseases. CT findings in nontumoral bowel diseases

    Fujikawa, Koichi; Yamane, Kosuke; Nakanishi, Tadashi; Miura, Yoshio; Kato, Yoshitaka; Yahata, Noriko; Iwamoto, Toshiyuki; Katayama, Hiroshi; Katsuta, Shizutomo

    1987-03-01

    CT findings of 46 cases with inflammatory and other nontumoral bowel diseases were retrospectively studied. Patients were given 500 to 1000 ml of lukewarm water orally or rectally to distend the intestinal lumen. In all cases water-soluble iodine contrast media was administered intravenously. The CT findings in Crohn's disease included mural thickening, luminal narrowing, bowel wall enhancement, wall rigidity, serration of intestinal border, dilatation of mesenteric vessels, periintestinal blurring (inflamatory reaction of mesentery), fibrofatty proliferation, effusion, abscess and fistula. Many of these findings suggested the transmural nature of the disease and gave diagnostic clues of the disease. In cases with ulcerative colitis, thickening of bowel wall was insignificant and extraintestinal complications were absent. CT appears to play an important role in distinguishing Crohn's disease and ulcerative colitis. Luminal narrowing and mural thickening were also observed in a case with intestinal ischemia, but these mural changes were not accompanied by mesenteric abnormalities to the degree of Crohn's disease. In cases with penetrating peptic ulcer and diverticulitis, CT demonstrated inflammatory reactions of surrounding tissue such as thickening of neighboring fascia, increase in attenuation value of mesenteric fat, effusion and abscess. Even in cases with confusing clinical symptoms, appendicitis was easily diagnosed on CT which showed swelling of appendix and inflammatory changes of surrounding structures. Mechanical obstruction of the intestine could be identified on CT by a notable change of luminal sizes at the site of obstruction. CT appearances of intussusception were distinctive and a soft tissue mass (intussusceptum) and mesenteric fat was seen within a markedly dilated intussuscipiens. CT could also reveal pancreatitis and splenic infarction as the causes of clinically-undiagnosed paralytic ileus. (J.P.N.).

  2. Essential roles for lines in mediating leg and antennal proximodistal patterning and generating a stable Notch signaling interface at segment borders.

    Greenberg, Lina; Hatini, Victor

    2009-06-01

    The Drosophila leg imaginal disc provides a paradigm with which to understand the fundamental developmental mechanisms that generate an intricate appendage structure. Leg formation depends on the subdivision of the leg proximodistal (PD) axis into broad domains by the leg gap genes. The leg gap genes act combinatorially to initiate the expression of the Notch ligands Delta (Dl) and Serrate (Ser) in a segmental pattern. Dl and Ser induce the expression of a set of transcriptional regulators along the segment border, which mediate leg segment growth and joint morphogenesis. Here we show that Lines accumulates in nuclei in the presumptive tarsus and the inter-joints of proximal leg segments and governs the formation of these structures by destabilizing the nuclear protein Bowl. Across the presumptive tarsus, lines modulates the opposing expression landscapes of the leg gap gene dachshund (dac) and the tarsal PD genes, bric-a-brac 2 (bab), apterous (ap) and BarH1 (Bar). In this manner, lines inhibits proximal tarsal fates and promotes medial and distal tarsal fates. Across proximal leg segments, lines antagonizes bowl to promote Dl expression by relief-of-repression. In turn, Dl signals asymmetrically to stabilize Bowl in adjacent distal cells. Bowl, then, acts cell-autonomously, together with one or more redundant factors, to repress Dl expression. Together, lines and bowl act as a binary switch to generate a stable Notch signaling interface between Dl-expressing cells and adjacent distal cell. lines plays analogous roles in developing antennae, which are serially homologous to legs, suggesting evolutionarily conserved roles for lines in ventral appendage formation.

  3. Features of electrocoagulation syndrome after endoscopic submucosal dissection for colorectal neoplasm.

    Yamashina, Takeshi; Takeuchi, Yoji; Uedo, Noriya; Hamada, Kenta; Aoi, Kenji; Yamasaki, Yasushi; Matsuura, Noriko; Kanesaka, Takashi; Akasaka, Tomofumi; Yamamoto, Sachiko; Hanaoka, Noboru; Higashino, Koji; Ishihara, Ryu; Iishi, Hiroyasu

    2016-03-01

    Endoscopic submucosal dissection (ESD) is a promising treatment for large gastrointestinal superficial neoplasms, although it is technically difficult, and perforation and delayed bleeding are well-known adverse events. However, there have been no large studies about electrocoagulation syndrome after colorectal ESD. The aim of this study was to evaluate the incidence and clinical significant risk factors of post-ESD coagulation syndrome (PECS). This was a retrospective cohort study conducted in a referral cancer center. A total of 336 patients with colorectal neoplasms (143 adenomas or serrated lesions and 193 carcinomas) underwent ESD from January 2011 to June 2013. Incidence, outcome, and factors associated with occurrence of PECS were investigated. Occurred in 32 patients (9.5%). The median time until PECS was 15.5 h, and the median period of PECS was 32.5 h. Fever (≥37.6 °C) after ESD was found in 41% of the PECS group and 9% of the non-PECS group (P < 0.001). All PECS cases were managed conservatively. On multivariate analysis, female patients (odds ratio [OR] = 3.2, P = 0.002), lesion location at ascending colon and cecum (OR = 3.5, P = 0.001), and resected specimen ≥40 mm (OR = 2.1, P = 0.05) were independent risk factors for PECS. Occurred in 32 patients (9.5%) with colorectal ESD; however, all cases had a good outcome with conservative management. Female sex, tumor location at the ascending colon and cecum, and resected specimen ≥40 mm were independently significant risk factors for PECS. © 2015 Journal of Gastroenterology and Hepatology Foundation and John Wiley & Sons Australia, Ltd.

  4. Time-dependent tegumental surface changes in juvenile Fasciola gigantica in response to triclabendazole treatment in goat.

    Shareef, P A Ahammed; Brennan, Gerard P; McVeigh, Paul; Khan, M A Hannan; Morphew, Russell M; Mousley, Angela; Marks, Nikki J; Saifullah, M K; Brophy, Peter M; Maule, Aaron G; Abidi, S M A

    2014-08-01

    Triclabendazole (TCBZ), the anthelmintic drug active against both mature and immature liver flukes, was used to investigate the effect of in vivo treatment on the tegumental surface of juvenile Fasciola gigantica. Five goats were infected with 150 F. gigantica metacercariae each by oral gavage. Four of them were treated with single dose of TCBZ at 10mg/kg at four weeks post-infection. They were euthanized at 0 (untreated), 24, 48, 72 and 96h post treatment. Juvenile flukes were manually retrieved from the goat livers and processed for scanning electron microscopy. In control flukes, the anterior region was adorned with sharply pointed spines projecting away from the surface, while in the posterior region, spines become shorter and narrower, loosing serration and with the appearance of distinct furrows and papillae. The dorsal surface retained the same pattern of surface architecture similar to that of ventral surface. Flukes obtained from 24h post-treatment did not show any apparent change and were still very active. However, there were limited movements and some blebbing, swelling, deposition of tegumental secretions and some flattening displayed by the flukes of 48h post-treatment. All the worms were found dead 72h post-treatment and showed advanced level of tegumental disruptions, consisting of severe distortion of spines, sloughing off the tegument to expose the basal lamina, formation of pores and isolated patches of lesions. By 96h post-treatment, the disruption was extremely severe and the tegument was completely sheared off causing deeper lesions that exposed the underlying musculature. The disruption was more severe at posterior than anterior region and on ventral than dorsal surface. The present study further establishes the time-course of TCBZ action in vivo with 100% efficacy against the juvenile tropical liver fluke. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. A contribution key for the first recorded spider (Arachnidae: Aranae fauna from Sheringal, Khyber Pakhtunkhwa, Pakistan

    Farzana Khan Perveen

    2016-03-01

    Full Text Available The spiders (Arthropoda: Arachnida have a hard cephalothorax and soft abdomen. They are environmental indicators and play an important role in biological control of pests and vectors. The present study was conducted to prepare the key for the first recorded spider fauna during June 2013-July 2014 in 6 quadrates of Sheringal, i.e., Daramdala, Doki, Guryaal, Samang, Shahoor and Sia-Sheringal, Dir Upper (DU, Khyber Pakhtunkhwa (KP, Pakistan. During the present research, 10 species belong to 7 families, and 10 genera were recorded. The family Sparassidae was the largest among collected families (nSparassidae=19, its body was larger than others, abdomen was narrow at posterior, cephalothorax region was broad and brown, chelicearae were forwarded, legs were strong, body have hairs grey to brown and they were harmless and speedy. Gnphosidae family was the smallest among collected families (nGnphosidae=3, their eyes were heterogeneous, their inner margin of chelicerae were with a wide serrated lamina, posterior row of eyes were much longer than anterior, with lateral rounded maxillae. While the family Hersiliidae was the unique in collected families (nHersiliidae=6, as they are known as two-tail spiders, they have enlarged spinnerets, their male grow up to 8 mm and female up to 10 mm, they have 2 tails and are mimic with host plants. It was concluded that the majority of the collected species belong to the family Sparassidae. It is recommended that further research may be conducted on arboreal and aquatic species of spiders in Sheringal, KP, Pakistan.

  6. Analysis of the microstructure of Xenodontinae snake scales associated with different habitat occupation strategies

    O. Rocha-Barbosa

    Full Text Available The morphology of many organisms seems to be related to the environment they live in. Nonetheless, many snakes are so similar in their morphological patterns that it becomes quite difficult to distinguish any adaptive divergence that may exist. Many authors suggest that the microornamentations on the scales of reptiles have important functional value. Here, we examined variations on the micromorphology of the exposed oberhautchen surface of dorsal, lateral, and ventral scales from the mid-body region of Xenodontinae snakes: Sibynomorphus mikani (terricolous, Imantodes cenchoa (arboreal, Helicops modestus (aquatic and Atractus pantostictus (fossorial. They were metallized and analyzed through scanning electron microscopy. All species displayed similar microstructures, such as small pits and spinules, which are often directed to the scale caudal region. On the other hand, there were some singular differences in scale shape and in the microstructural pattern of each species. S. mikani and I. cenchoa have larger spinules arranged in a row which overlap the following layers on the scale surface. Species with large serrate borders are expected to have more frictional resistance from the caudal-cranial direction. This can favor life in environments which require more friction, facilitating locomotion. In H. modestus, the spinules are smaller and farther away from the posterior rows, which should help reduce water resistance during swimming. The shallower small pits found in this species can retain impermeable substances, as in aquatic Colubridae snakes. The spinules adhering to the caudal scales of A. pantostictus seem to form a more regular surface, which probably aid their fossorial locomotion, reducing scale-ground friction. Our data appear to support the importance of functional microstructure, contributing to the idea of snake species adaptation to their preferential microhabitats.

  7. Impact of the shape of geological contact on mining losses in the process of near-contact zone development

    Г. С. Курчин

    2017-03-01

    Full Text Available In Russia development of mineral resources is carried out on a truly grand scale, and mining industry is in its essence a basic sector, supporting and facilitating the development of national economy. It predetermines the need of safe and responsible attitude towards riches of our subsoil – mineral resources. With this in mind, one of the key requirements to extraction technologies is minimization of mining losses and ore dilution.The biggest ore losses in the mining block take place in the process of development of contact areas between the ore body and surrounding rocks, due to differences between development pattern and surface of geological contact. Complexity of the contact between ore and surrounding rocks is traditionally characterized by so called «stochastic contact zone». Technological difficulty of extracting ore from the ore – wallrock contact is determined by volatility of geometric parameters in «stochastic contact zone» in the plane of geological contact.Current paper focuses on the issues of standard-setting for mining losses and ore dilution in the process of near-contact zone development. A method is suggested to estimate standard values of losses and ore dilution in stochastic zones. Authors have developed an algorithm of defining the shape of the contact. In the stochastic zone the contact can have a rectangular, sinusoidal, serrate and straight-line shapes. Research has established a relation between the contact shape and amounts of mining losses and ore dilution, formulas to calculate standard values are presented. Using suggested method, standard values for contact ore losses can be obtained in a quicker and more reliable way.

  8. An updated Asia Pacific Consensus Recommendations on colorectal cancer screening.

    Sung, J J Y; Ng, S C; Chan, F K L; Chiu, H M; Kim, H S; Matsuda, T; Ng, S S M; Lau, J Y W; Zheng, S; Adler, S; Reddy, N; Yeoh, K G; Tsoi, K K F; Ching, J Y L; Kuipers, E J; Rabeneck, L; Young, G P; Steele, R J; Lieberman, D; Goh, K L

    2015-01-01

    Since the publication of the first Asia Pacific Consensus on Colorectal Cancer (CRC) in 2008, there are substantial advancements in the science and experience of implementing CRC screening. The Asia Pacific Working Group aimed to provide an updated set of consensus recommendations. Members from 14 Asian regions gathered to seek consensus using other national and international guidelines, and recent relevant literature published from 2008 to 2013. A modified Delphi process was adopted to develop the statements. Age range for CRC screening is defined as 50-75 years. Advancing age, male, family history of CRC, smoking and obesity are confirmed risk factors for CRC and advanced neoplasia. A risk-stratified scoring system is recommended for selecting high-risk patients for colonoscopy. Quantitative faecal immunochemical test (FIT) instead of guaiac-based faecal occult blood test (gFOBT) is preferred for average-risk subjects. Ancillary methods in colonoscopy, with the exception of chromoendoscopy, have not proven to be superior to high-definition white light endoscopy in identifying adenoma. Quality of colonoscopy should be upheld and quality assurance programme should be in place to audit every aspects of CRC screening. Serrated adenoma is recognised as a risk for interval cancer. There is no consensus on the recruitment of trained endoscopy nurses for CRC screening. Based on recent data on CRC screening, an updated list of recommendations on CRC screening is prepared. These consensus statements will further enhance the implementation of CRC screening in the Asia Pacific region. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  9. Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti-6Al-4V

    Molinari, A.; Soldani, X.; Miguélez, M. H.

    2013-11-01

    The phenomenon of adiabatic shear banding is analyzed theoretically in the context of metal cutting. The mechanisms of material weakening that are accounted for are (i) thermal softening and (ii) material failure related to a critical value of the accumulated plastic strain. Orthogonal cutting is viewed as a unique configuration where adiabatic shear bands can be experimentally produced under well controlled loading conditions by individually tuning the cutting speed, the feed (uncut chip thickness) and the tool geometry. The role of cutting conditions on adiabatic shear banding and chip serration is investigated by combining finite element calculations and analytical modeling. This leads to the characterization and classification of different regimes of shear banding and the determination of scaling laws which involve dimensionless parameters representative of thermal and inertia effects. The analysis gives new insights into the physical aspects of plastic flow instability in chip formation. The originality with respect to classical works on adiabatic shear banding stems from the various facets of cutting conditions that influence shear banding and from the specific role exercised by convective flow on the evolution of shear bands. Shear bands are generated at the tool tip and propagate towards the chip free surface. They grow within the chip formation region while being convected away by chip flow. It is shown that important changes in the mechanism of shear banding take place when the characteristic time of shear band propagation becomes equal to a characteristic convection time. Application to Ti-6Al-4V titanium are considered and theoretical predictions are compared to available experimental data in a wide range of cutting speeds and feeds. The fundamental knowledge developed in this work is thought to be useful not only for the understanding of metal cutting processes but also, by analogy, to similar problems where convective flow is also interfering with

  10. Bio-mimetic Flow Control

    Choi, Haecheon

    2009-11-01

    Bio-mimetic engineering or bio-mimetics is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology (from Wikipedia). The concept itself is old, but successful developments have been made recently, especially in the research field of flow control. The objective of flow control based on the bio-mimetic approach is to develop novel concepts for reducing drag, increasing lift and enhancing aerodynamic performance. For skin friction reduction, a few ideas have been suggested such as the riblet from shark, compliant surface from dolphin, microbubble injection and multiple front-body curvature from penguin, and V-shaped protrusion from sailfish. For form drag reduction, several new attempts have been also made recently. Examples include the V-shaped spanwise grooves from saguaro cactus, overall shape of box fish, longitudinal grooves on scallop shell, bill of swordfish, hooked comb on owl wing, trailing-edge protrusion on dragonfly wing, and fillet. For the enhancement of aerodynamic performance, focuses have been made on the birds, fish and insects: e.g., double layered feather of landing bird, leading-edge serration of humpback-whale flipper, pectoral fin of flying fish, long tail on swallowtail-butterfly wing, wing flapping motion of dragonfly, and alula in birds. Living animals adapt their bodies to better performance in multi purposes, but engineering requires single purpose in most cases. Therefore, bio-mimetic approaches often produce excellent results more than expected. However, they are sometimes based on people's wrong understanding of nature and produce unwanted results. Successes and failures from bio-mimetic approaches in flow control will be discussed in the presentation.

  11. Two new species of shovel-jaw carp Onychostoma (Teleostei: Cyprinidae) from southern Vietnam.

    Hoang, Huy Duc; Pham, Hung Manh; Tran, Ngan Trong

    2015-05-22

    Two new species of large shovel-jaw carps in the genus Onychostoma are described from the upper Krong No and middle Dong Nai drainages of the Langbiang Plateau in southern Vietnam. These new species are known from streams in montane mixed pine and evergreen forests between 140 and 1112 m. Their populations are isolated in the headwaters of the upper Sre Pok River of the Mekong basin and in the middle of the Dong Nai basin. Both species are differentiated from their congeners by a combination of the following characters: transverse mouth opening width greater than head width, 14-17 predorsal scales, caudal-peduncle length 3.9-4.2 times in SL, no barbels in adults and juveniles, a strong serrated last simple ray of the dorsal fin, and small eye diameter (20.3-21.5% HL). Onychostoma krongnoensis sp. nov. is differentiated from Onychostoma dongnaiensis sp. nov. by body depth (4.0 vs. 3.2 times in SL), predorsal scale number (14-17 vs. 14-15), dorsal-fin length (4.5 vs. 4.2 times in SL), caudal-peduncle length (3.9 vs. 4.2 times in SL), colour in life (dark vs. bright), and by mitochondrial DNA (0.2% sequence divergence). Molecular evidence indicates that both species are members of Onychostoma and are distinct from all congeners sampled (uncorrected sequence divergences at the 16S rRNA gene of >2.0% for all Onychostoma for which homologous 16S rRNA sequences are available).

  12. Study of dynamic strain aging in dual phase steel

    Queiroz, R.R.U.; Cunha, F.G.G.; Gonzalez, B.M.

    2012-01-01

    Highlights: ► Characterization of the high temperature mechanical behavior of a dual phase steel. ► Determination of the effect of dynamic strain aging on the strain hardening rate. ► Identification of the mechanism associated with dynamic strain aging. ► The value of the interaction energy carbon–dislocation in ferrite was confirmed. - Abstract: The susceptibility to dynamic strain aging of a dual phase steel was evaluated by the variation of mechanical properties in tension with the temperature and the strain rate. The tensile tests were performed at temperatures varying between 25 °C and 600 °C and at strain rates ranging from 10 −2 to 5 × 10 −4 s −1 . The studied steel presented typical manifestations related to dynamic strain aging: serrated flow (the Portevin–Le Chatelier effect) for certain combinations of temperature and strain rates; the presence of a plateau in the variation of yield stress with temperature; a maximum in the curves of tensile strength, flow stress, and work hardening exponent as a function of temperature; and a minimum in the variation of total elongation with temperature. The determined apparent activation energy values, associated with the beginning of the Portevin–Le Chatelier effect and the maximum in the variation of flow stress with temperature, were 83 kJ/mol and 156 kJ/mol, respectively. These values suggest that the mechanism responsible for dynamic strain aging in the dual phase steel is the locking of dislocations by carbon atoms in ferrite and that the formation of clusters and/or transition carbides and carbide precipitation in martensite do not interfere with the dynamic strain aging process.

  13. Evaluation of Patients with an Apparent False Positive Stool DNA Test: The Role of Repeat Stool DNA Testing.

    Cooper, Gregory S; Markowitz, Sanford D; Chen, Zhengyi; Tuck, Missy; Willis, Joseph E; Berger, Barry M; Brenner, Dean E; Li, Li

    2018-03-07

    There is uncertainty as to the appropriate follow-up of patients who test positive on multimarker stool DNA (sDNA) testing and have a colonoscopy without neoplasia. To determine the prevalence of missed colonic or occult upper gastrointestinal neoplasia in patients with an apparent false positive sDNA. We prospectively identified 30 patients who tested positive with a commercially available sDNA followed by colonoscopy without neoplastic lesions. Patients were invited to undergo repeat sDNA at 11-29 months after the initial test followed by repeat colonoscopy and upper endoscopy. We determined the presence of neoplastic lesions on repeat evaluation stratified by results of repeat sDNA. Twelve patients were restudied. Seven patients had a negative second sDNA test and a normal second colonoscopy and upper endoscopy. In contrast, 5 of 12 subjects had a persistently positive second sDNA test, and 3 had positive findings, including a 3-cm sessile transverse colon adenoma with high-grade dysplasia, a 2-cm right colon sessile serrated adenoma with dysplasia, and a nonadvanced colon adenoma (p = 0.045). These corresponded to a positive predictive value of 0.60 (95% CI 0.17-1.00) and a negative predictive value of 1.00 (95% CI 1.00-1.00) for the second sDNA test. In addition, the medical records of all 30 subjects with apparent false positive testing were reviewed and no documented cases of malignant tumors were recorded. Repeat positive sDNA testing may identify a subset of patients with missed or occult colorectal neoplasia after negative colonoscopy for an initially positive sDNA. High-quality colonoscopy with careful attention to the right colon in patients with positive sDNA is critically important and may avoid false negative colonoscopy.

  14. Hot Ductility Characterization of Sanicro-28 Super-Austenitic Stainless Steel

    Mirzaei, A.; Zarei-Hanzaki, A.; Abedi, H. R.

    2016-05-01

    The hot ductility behavior of a super-austenitic stainless steel has been studied using tensile testing method in the temperature range from 1073 K to 1373 K (800 °C to 1100 °C) under the strain rates of 0.1, 0.01, and 0.001 s-1. The hot compression tests were also performed at the same deformation condition to identify the activated restoration mechanisms. At lower temperatures [ i.e., 1073 K and 1173 K (800 °C and 900 °C)], the serration of initial grain boundaries confirms the occurrence of dynamic recovery as the predominant restoration process. However, in the course of applied deformation, the initial microstructure is recrystallized at higher temperatures [ i.e., 1273 K and 1373 K (1000 °C and 1100 °C)]. In this respect, annealing the twin boundaries could well stimulate the recrystallization kinetic through initiation new annealing twins on prior annealing twin boundaries. The hot tensile results show that there is a general trend of increasing ductility by temperature. However, two regions of ductility drop are recognized at 1273 K and 1373 K (1000°C)/0.1s-1 and (1100°C)/0.01s-1. The ductility variations at different conditions of temperature and strain rate are discussed in terms of simultaneous activation of grain boundary sliding and restoration processes. The observed ductility troughs are attributed to the occurrence of grain boundary sliding and the resulting R-type and W-type cracks. The occurrence of dynamic recrystallization is also considered as the main factor increasing the ductility at higher temperatures. The enhanced ductility is primarily originated from the post-uniform elongation behavior, which is directly associated with the strain rate sensitivity of the experimental material.

  15. Sedimentology and ichnology of Neogene Coastal Swamp deposits in the Niger Delta Basin, Nigeria

    Ezeh Sunny C.

    2016-09-01

    Full Text Available Often analyses of depositional environments from sparse data result in poor interpretation, especially in multipartite depositional settings such as the Niger Delta. For instance, differentiating channel sandstones, heteroliths and mudstones within proximal environments from those of distal facies is difficult if interpretations rely solely on well log signatures. Therefore, in order to achieve an effective and efficient interpretation of the depositional conditions of a given unit, integrated tools must be applied such as matching core descriptions with wireline log signature. In the present paper cores of three wells from the Coastal Swamp depositional belt of the Niger Delta are examined in order to achieve full understanding of the depositional environments. The well sections comprise cross-bedded sandstones, heteroliths (coastal and lower shoreface and mudstones that were laid down in wave, river and tidal processes. Interpretations were made from each data set comprising gamma ray logs, described sedimentological cores showing sedimentary features and ichnological characteristics; these were integrated to define the depositional settings. Some portions from one of the well sections reveal a blocky gamma ray well log signature instead of a coarsening-upward trend that characterises a shoreface setting while in other wells the signatures for heteroliths at some sections are bell blocky in shaped rather than serrated. Besides, heteroliths and mudstones within the proximal facies and those of distal facies were difficult to distinguish solely on well log signatures. However, interpretation based on sedimentology and ichnology of cores from these facies was used to correct these inconsistencies. It follows that depositional environment interpretation (especially in multifarious depositional environments such as the Niger Delta should ideally be made together with other raw data for accuracy and those based solely on well log signatures should

  16. Validation test of advanced technology for IPV nickel-hydrogen flight cells: Update

    Smithrick, John J.; Hall, Stephen W.

    1992-01-01

    Individual pressure vessel (IPV) nickel-hydrogen technology was advanced at NASA Lewis and under Lewis contracts with the intention of improving cycle life and performance. One advancement was to use 26 percent potassium hydroxide (KOH) electrolyte to improve cycle life. Another advancement was to modify the state-of-the-art cell design to eliminate identified failure modes. The modified design is referred to as the advanced design. A breakthrough in the low-earth-orbit (LEO) cycle life of IPV nickel-hydrogen cells has been previously reported. The cycle life of boiler plate cells containing 26 percent KOH electrolyte was about 40,000 LEO cycles compared to 3,500 cycles for cells containing 31 percent KOH. The boiler plate test results are in the process of being validated using flight hardware and real time LEO testing at the Naval Weapons Support Center (NWSC), Crane, Indiana under a NASA Lewis Contract. An advanced 125 Ah IPV nickel-hydrogen cell was designed. The primary function of the advanced cell is to store and deliver energy for long-term, LEO spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent KOH electrolyte; (2) use of a patented catalyzed wall wick; (3) use of serrated-edge separators to facilitate gaseous oxygen and hydrogen flow within the cell, while still maintaining physical contact with the wall wick for electrolyte management; and (4) use of a floating rather than a fixed stack (state-of-the-art) to accommodate nickel electrode expansion due to charge/discharge cycling. The significant improvements resulting from these innovations are: extended cycle life; enhanced thermal, electrolyte, and oxygen management; and accommodation of nickel electrode expansion. The advanced cell design is in the process of being validated using real time LEO cycle life testing of NWSC, Crane, Indiana. An update of validation test results confirming this technology is presented.

  17. Validation test of advanced technology for IPV nickel-hydrogen flight cells - Update

    Smithrick, John J.; Hall, Stephen W.

    1992-01-01

    Individual pressure vessel (IPV) nickel-hydrogen technology was advanced at NASA Lewis and under Lewis contracts with the intention of improving cycle life and performance. One advancement was to use 26 percent potassium hydroxide (KOH) electrolyte to improve cycle life. Another advancement was to modify the state-of-the-art cell design to eliminate identified failure modes. The modified design is referred to as the advanced design. A breakthrough in the LEO cycle life of IPV nickel-hydrogen cells has been previously reported. The cycle life of boiler plate cells containing 26 percent KOH electrolyte was about 40,000 LEO cycles compared to 3,500 cycles for cells containing 31 percent KOH. The boiler plate test results are in the process of being validated using flight hardware and real time LEO testing. The primary function of the advanced cell is to store and deliver energy for long-term, LEO spacecraft missions. The new features of this design are: (1) use of 26 percent rather than 31 percent KOH electrolyte; (2) use of a patented catalyzed wall wick; (3) use of serrated-edge separators to facilitate gaseous oxygen and hydrogen flow within the cell, while still maintaining physical contact with the wall wick for electrolyte management; and (4) use of a floating rather than a fixed stack (state-of-the-art) to accommodate nickel electrode expansion due to charge/discharge cycling. The significant improvements resulting from these innovations are: extended cycle life; enhanced thermal, electrolyte, and oxygen management; and accommodation of nickel electrode expansion.

  18. Paleoserranus lakamhae gen. et sp. nov., a Paleocene seabass (Perciformes: Serranidae) from Palenque, Chiapas, southeastern Mexico

    Cantalice, Kleyton M.; Alvarado-Ortega, Jesús; Alaniz-Galvan, Abril

    2018-04-01

    Paleoserranus lakamhae gen. et sp. nov. is here described based on well-preserved fossils from the Paleocene marine sediments of the Tenejapa-Lacandón geological unit, belonging to both Division del Norte and Belisario Domínguez quarries, near Palenque, Chiapas, southeastern Mexico. This species exhibits distinctive characters of the order Perciformes, such as the presence of spines in the dorsal, pelvic, and anal fins, as well as the pelvic and pectoral girdles in contact between them. This fish also has neither procurrent spur nor posterior uroneural, characters that support its place within the family Serranidae. It also has a distinctive combination of characters, including a serrated lacrimal and a toothed ectopterygoid, never recorded before among serranids. Additionally, this fossil fish shares some characters with different species nested within the subfamilies Serraninae, Anthiinae, and Ephinephelinae; these include a predorsal formula of 0/0/0 + 2/1 + 1/1; a preopercle with its ventral edge sinuous and showing a strong antrorse spine; its dorsal fin consists of nine spines and eight to ten soft rays; 13 rays in its pectoral fin; and its rounded caudal fin structured with formula I+8-7+I. Paleoserranus lakamhae gen. et sp. nov. is a Serranidae incertae sedis because it does not fit into any subgroup; however, this Paleocene fish is the earliest fossil record of the family Serranidae. The place of occurrence of this new fossil record suggests that the origin and of the seabasses took place in the Caribbean region of North America.

  19. Clinical result of high-dose rate intraluminal brachytherapy for esophageal carcinoma with a remote afterloading system

    Fukuda, Haruyuki; Nakajima, Toshifumi; Tada, Takuhito; Tanaka, Masahiro; Tsumura, Masashi; Onoyama, Yasuto

    1992-01-01

    During the period from 1977 through 1987, 105 patients with esophageal carcinoma were radically treated by radiotherapy. Forty-six patients receiving therapy before August 1982 were all treated by external beam therapy alone (Group 1). Since September 1982, 26 patients were treated by external beam therapy alone (Group 2) and 33 patients were treated by high-dose-rate intraluminal brachytherapy with a remote afterloading system combined with external beam therapy (Group 3). Dose of external beam therapy for Group 1, Group 2 and Group 3 patients were 66.7 Gy, 68.7 Gy and 55.9 Gy on the average. The intraluminal brachytherapy was performed with a total dose of 12 Gy consisting of 3 Gy twice a week. Ten of 72 patients (14%) treated by external beam therapy alone achieved complete response, whereas 14 of 33 patients (42%) treated by high-dose-rate intraluminal brachytherapy combined with external beam therapy had complete response. One-, and 3-year survival rates were 36% and 10% in the Group 1, 32% and 12% in the Group 2 and 56% and 36% in the Group 3. For Group 3, good survival rate was obtained in tumorous type and serrated type. Patients with tumor of less than 5 cm in Group 3 had good survival. The data suggest that the high-dose-rate intraluminal bracytherapy prescribed as a boost therapy following external beam therapy is an effective therapy modality for esophageal carcinoma which is of non-circumferential tumor or less than 5 cm. (author)

  20. Colorectal carcinogenesis: Review of human and experimental animal studies

    Tanaka Takuji

    2009-01-01

    Full Text Available This review gives a comprehensive overview of cancer development and links it to the current understanding of tumorigenesis and malignant progression in colorectal cancer. The focus is on human and murine colorectal carcinogenesis and the histogenesis of this malignant disorder. A summary of a model of colitis-associated colon tumorigenesis (an AOM/DSS model will also be presented. The earliest phases of colorectal oncogenesis occur in the normal mucosa, with a disorder of cell replication. The large majority of colorectal malignancies develop from an adenomatous polyp (adenoma. These can be defined as well-demarcated masses of epithelial dysplasia, with uncontrolled crypt cell proliferation. When neoplastic cells pass through the muscularis mucosa and infiltrate the submucosa, they are malignant. Carcinomas usually originate from pre-existing adenomas, but this does not imply that all polyps undergo malignant changes and does not exclude de novo oncogenesis. Besides adenomas, there are other types of pre-neoplasia, which include hyperplastic polyps, serrated adenomas, flat adenomas and dysplasia that occurs in the inflamed colon in associated with inflammatory bowel disease. Colorectal neoplasms cover a wide range of pre-malignant and malignant lesions, many of which can easily be removed during endoscopy if they are small. Colorectal neoplasms and/or pre-neoplasms can be prevented by interfering with the various steps of oncogenesis, which begins with uncontrolled epithelial cell replication, continues with the formation of adenomas and eventually evolves into malignancy. The knowledge described herein will help to reduce and prevent this malignancy, which is one of the most frequent neoplasms in some Western and developed countries.

  1. Inhibition of tumor angiogenesis and tumor growth by the DSL domain of human Delta-like 1 targeted to vascular endothelial cells.

    Zhao, Xing-Cheng; Dou, Guo-Rui; Wang, Li; Liang, Liang; Tian, Deng-Mei; Cao, Xiu-Li; Qin, Hong-Yan; Wang, Chun-Mei; Zhang, Ping; Han, Hua

    2013-07-01

    The growth of solid tumors depends on neovascularization. Several therapies targeting tumor angiogenesis have been developed. However, poor response in some tumors and emerging resistance necessitate further investigations of new drug targets. Notch signal pathway plays a pivotal role in vascular development and tumor angiogenesis. Either blockade or forced activation of this pathway can inhibit angiogenesis. As blocking Notch pathway results in the formation of vascular neoplasm, activation of Notch pathway to prevent tumor angiogenesis might be an alternative choice. However, an in vivo deliverable reagent with highly efficient Notch-activating capacity has not been developed. Here, we generated a polypeptide, hD1R, which consists of the Delta-Serrate-Lag-2 fragment of the human Notch ligand Delta-like 1 and an arginine-glycine-aspartate (RGD) motif targeting endothelial cells (ECs). We showed that hD1R could bind to ECs specifically through its RGD motif and effectively triggered Notch signaling in ECs. We demonstrated both in vitro and in vivo that hD1R inhibited angiogenic sprouting and EC proliferation. In tumor-bearing mice, the injection of hD1R effectively repressed tumor growth, most likely through increasing tumor hypoxia and tissue necrosis. The amount and width of vessels reduced remarkably in tumors of mice treated with hD1R. Moreover, vessels in tumors of mice treated with hD1R recruited more NG2(+) perivascular cells and were better perfused. Combined application of hD1R and chemotherapy with cisplatin and teniposide revealed that these two treatments had additive antitumor effects. Our study provided a new strategy for antiangiogenic tumor therapy.

  2. Inhibition of Tumor Angiogenesis and Tumor Growth by the DSL Domain of Human Delta-Like 1 Targeted to Vascular Endothelial Cells

    Xing-Cheng Zhao

    2013-07-01

    Full Text Available The growth of solid tumors depends on neovascularization. Several therapies targeting tumor angiogenesis have been developed. However, poor response in some tumors and emerging resistance necessitate further investigations of newdrug targets. Notch signal pathway plays a pivotal role in vascular development and tumor angiogenesis. Either blockade or forced activation of this pathway can inhibit angiogenesis. As blocking Notch pathway results in the formation of vascular neoplasm, activation of Notch pathway to prevent tumor angiogenesis might be an alternative choice. However, an in vivo deliverable reagent with highly efficient Notch-activating capacity has not been developed. Here, we generated a polypeptide, hD1R, which consists of the Delta-Serrate-Lag-2 fragment of the human Notch ligand Delta-like 1 and an arginine-glycine-aspartate (RGD motif targeting endothelial cells (ECs. We showed that hD1R could bind to ECs specifically through its RGD motif and effectively triggered Notch signaling in ECs. We demonstrated both in vitro and in vivo that hD1R inhibited angiogenic sprouting and EC proliferation. In tumor-bearing mice, the injection of hD1R effectively repressed tumor growth, most likely through increasing tumor hypoxia and tissue necrosis. The amount and width of vessels reduced remarkably in tumors of mice treated with hD1R. Moreover, vessels in tumors of mice treated with hD1R recruited more NG2+ perivascular cells and were better perfused. Combined application of hD1R and chemotherapy with cisplatin and teniposide revealed that these two treatments had additive antitumor effects. Our study provided a new strategy for antiangiogenic tumor therapy.

  3. Regulation of Plant Microprocessor Function in Shaping microRNA Landscape

    Jakub Dolata

    2018-06-01

    Full Text Available MicroRNAs are small molecules (∼21 nucleotides long that are key regulators of gene expression. They originate from long stem–loop RNAs as a product of cleavage by a protein complex called Microprocessor. The core components of the plant Microprocessor are the RNase type III enzyme Dicer-Like 1 (DCL1, the zinc finger protein Serrate (SE, and the double-stranded RNA binding protein Hyponastic Leaves 1 (HYL1. Microprocessor assembly and its processing of microRNA precursors have been reported to occur in discrete nuclear bodies called Dicing bodies. The accessibility of and modifications to Microprocessor components affect microRNA levels and may have dramatic consequences in plant development. Currently, numerous lines of evidence indicate that plant Microprocessor activity is tightly regulated. The cellular localization of HYL1 is dependent on a specific KETCH1 importin, and the E3 ubiquitin ligase COP1 indirectly protects HYL1 from degradation in a light-dependent manner. Furthermore, proper localization of HYL1 in Dicing bodies is regulated by MOS2. On the other hand, the Dicing body localization of DCL1 is regulated by NOT2b, which also interacts with SE in the nucleus. Post-translational modifications are substantial factors that contribute to protein functional diversity and provide a fine-tuning system for the regulation of protein activity. The phosphorylation status of HYL1 is crucial for its activity/stability and is a result of the interplay between kinases (MPK3 and SnRK2 and phosphatases (CPL1 and PP4. Additionally, MPK3 and SnRK2 are known to phosphorylate SE. Several other proteins (e.g., TGH, CDF2, SIC, and RCF3 that interact with Microprocessor have been found to influence its RNA-binding and processing activities. In this minireview, recent findings on the various modes of Microprocessor activity regulation are discussed.

  4. Dynamic testing of horseshoe designs at impact on synthetic and dirt Thoroughbred racetrack materials.

    Mahaffey, C A; Peterson, M L; Thomason, J J; McIlwraith, C W

    2016-01-01

    Different horseshoe designs have been developed in an attempt to optimise footing for equine athletes. Horseshoe performance is assumed to be dependent on the surface and gait, but there are limited data on horseshoe performance on different surfaces, independent of gait variation. To quantify the dynamic loading for 3 aluminium racing shoe designs on Thoroughbred racetrack surface materials, using a biomechanical surface tester. A flat racing plate, a serrated V-Grip and a shoe with a 6 mm toe grab and 10 mm heel calks were tested on synthetic and dirt surfaces under typical operating conditions of temperature and moisture content for the respective material samples. Samples were tested under laboratory conditions, replicating a track surface by compacting material into a latex-lined mould surrounded by silica sand for representative boundary conditions. Peak loading and loading rates were measured vertically and horizontally (craniocaudal), simulating aspects of primary and secondary impacts of the hoof in a galloping horse. Maximum vertical and shear loads and loading rates were not significantly different between shoe types, with the exception of a reduced craniocaudal loading rate for the V-Grip shoe on the synthetic surface. All other statistical significance was related to the surface material. These 3 different Thoroughbred racing shoes do not have a significant impact on loading and loading rate, with the exception of the V-Grip shoe on a synthetic surface. Although the V-Grip may reduce craniocaudal peak load rates in a synthetic material with relatively high wax and/or low oil content, the reduction in load rate is less than the difference found between materials. This study indicates that shoeing has little effect, and that a track's surface material and its preparation have a significant effect on the dynamic loading during the impact phase of the stance. © 2015 EVJ Ltd.

  5. Value of computed tomography in diagnosis of intestinal diseases

    Fujikawa, Koichi; Yamane, Kosuke; Nakanishi, Tadashi; Miura, Yoshio; Kato, Yoshitaka; Yahata, Noriko; Iwamoto, Toshiyuki; Katayama, Hiroshi; Katsuta, Shizutomo.

    1987-01-01

    CT findings of 46 cases with inflammatory and other nontumoral bowel diseases were retrospectively studied. Patients were given 500 to 1000 ml of lukewarm water orally or rectally to distend the intestinal lumen. In all cases water-soluble iodine contrast media was administered intravenously. The CT findings in Crohn's disease included mural thickening, luminal narrowing, bowel wall enhancement, wall rigidity, serration of intestinal border, dilatation of mesenteric vessels, periintestinal blurring (inflamatory reaction of mesentery), fibrofatty proliferation, effusion, abscess and fistula. Many of these findings suggested the transmural nature of the disease and gave diagnostic clues of the disease. In cases with ulcerative colitis, thickening of bowel wall was insignificant and extraintestinal complications were absent. CT appears to play an important role in distinguishing Crohn's disease and ulcerative colitis. Luminal narrowing and mural thickening were also observed in a case with intestinal ischemia, but these mural changes were not accompanied by mesenteric abnormalities to the degree of Crohn's disease. In cases with penetrating peptic ulcer and diverticulitis, CT demonstrated inflammatory reactions of surrounding tissue such as thickening of neighboring fascia, increase in attenuation value of mesenteric fat, effusion and abscess. Even in cases with confusing clinical symptoms, appendicitis was easily diagnosed on CT which showed swelling of appendix and inflammatory changes of surrounding structures. Mechanical obstruction of the intestine could be identified on CT by a notable change of luminal sizes at the site of obstruction. CT appearances of intussusception were distinctive and a soft tissue mass (intussusceptum) and mesenteric fat was seen within a markedly dilated intussuscipiens. CT could also reveal pancreatitis and splenic infarction as the causes of clinically-undiagnosed paralytic ileus. (J.P.N.)

  6. The Malaria System MicroApp: A New, Mobile Device-Based Tool for Malaria Diagnosis.

    Oliveira, Allisson Dantas; Prats, Clara; Espasa, Mateu; Zarzuela Serrat, Francesc; Montañola Sales, Cristina; Silgado, Aroa; Codina, Daniel Lopez; Arruda, Mercia Eliane; I Prat, Jordi Gomez; Albuquerque, Jones

    2017-04-25

    Malaria is a public health problem that affects remote areas worldwide. Climate change has contributed to the problem by allowing for the survival of Anopheles in previously uninhabited areas. As such, several groups have made developing news systems for the automated diagnosis of malaria a priority. The objective of this study was to develop a new, automated, mobile device-based diagnostic system for malaria. The system uses Giemsa-stained peripheral blood samples combined with light microscopy to identify the Plasmodium falciparum species in the ring stage of development. The system uses image processing and artificial intelligence techniques as well as a known face detection algorithm to identify Plasmodium parasites. The algorithm is based on integral image and haar-like features concepts, and makes use of weak classifiers with adaptive boosting learning. The search scope of the learning algorithm is reduced in the preprocessing step by removing the background around blood cells. As a proof of concept experiment, the tool was used on 555 malaria-positive and 777 malaria-negative previously-made slides. The accuracy of the system was, on average, 91%, meaning that for every 100 parasite-infected samples, 91 were identified correctly. Accessibility barriers of low-resource countries can be addressed with low-cost diagnostic tools. Our system, developed for mobile devices (mobile phones and tablets), addresses this by enabling access to health centers in remote communities, and importantly, not depending on extensive malaria expertise or expensive diagnostic detection equipment. ©Allisson Dantas Oliveira, Clara Prats, Mateu Espasa, Francesc Zarzuela Serrat, Cristina Montañola Sales, Aroa Silgado, Daniel Lopez Codina, Mercia Eliane Arruda, Jordi Gomez i Prat, Jones Albuquerque. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 25.04.2017.

  7. Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel

    Field, Daniel M.; Van Aken, David C.

    2018-04-01

    Dynamic strain aging (DSA) and rapid work hardening are typical behaviors observed in medium-Mn transformation-induced plasticity (TRIP) steel. Three alloys with manganese ranging from 10.2 to 13.8 wt pct with calculated room temperature stacking fault energies varying from - 2.1 to 0.7 mJ/m2 were investigated. Significant serrations were observed in the stress-strain behavior for two of the steels and the addition of 4.6 wt pct chromium was effective in significantly reducing the occurrence of DSA. Addition of chromium to the alloy reduced DSA by precipitation of M23(C,N)6 during batch annealing at 873 K (600 °C) for 20 hours. Three distinct DSA mechanisms were identified: one related to manganese ordering in stacking faults associated with ɛ-martensite and austenite interface, with activation energies for the onset and termination of DSA being 145 and 277 kJ/mol. A second mechanism was associated with carbon diffusion in γ-austenite where Mn-C bonding added to the total binding energy, and activation energies of 88 and 155 kJ/mol were measured for the onset and termination of DSA. A third mechanism was attributed to dislocation pinning and unpinning by nitrogen in α-ferrite with activation energies of 64 and 123 kJ/mol being identified. Tensile behaviors of the three medium manganese steels were studied in both the hot band and batch annealed after cold working conditions. Ultimate tensile strengths ranged from 1310 to 1404 MPa with total elongation of 24.1 to 34.1 pct. X-ray diffraction (XRD) was used to determine the transformation response of the steels using interrupted tensile tests at room temperature. All three of the processed steels showed evidence of two-stage TRIP where γ-austenite first transformed to ɛ-martensite, and subsequently transformed to α-martensite.

  8. Radiotherapy of carcinoma of the esophagus

    Nishikawa, Kiyoshi; Suzumiya, Junji; Koga, Kenji; Sumiyoshi, Akinobu; Kusuhara, Toshiyuki; Watanabe, Katsushi

    1984-01-01

    The specimens obtained from 32 patients with carcinoma of the esophagus were histologically studied to evaluate the radiation effect on the primary lesions and regional lymph node metastases. The patients consist of 21 preoperatively irradiated cases and 11 autopsy cases. Radiation effect was divided into three grades according to Ohboshi-Shimosato's classification. A total dose of 20 to 55 Gy was given to preoperatively irradiated cases and that of 38 to 80 Gy to autopsy cases. The microscopic examination of the primary lesions revealed marked effect in 11 cases, moderate effect in 12 cases and mild or none effect in 9 cases. Radiation effect on carcinoma of the esophagus seemed to be related to the length of the primary lesion (p<0.001); the tumor of 6 cm or less showed marked effect in 9 out of 12 cases (75%), and that of more than 6 cm in only 1 of 19 cases (5%). As for the radiological type of the primaty lesions, superficial or tumorous type seemed to be more effective than serrated or spiral type. As for the histological subtypes, poorly defferentiated squamous cell carcinoma seemed to be more radiosensitive than moderately or well differentiated squamous cell carcinoma. Radiation effect on lymph node metastases within radiation field was correlated to that of the primary lesions. Our results suggest that for radical treatment of esophageal cancer a patient with the tumor length of 6 cm or less should be chosen, although radiological type and/or tumor grade can't also be ignored as a predictor. (author)

  9. Using non-systematic surveys to investigate effects of regional climate variability on Australasian gannets in the Hauraki Gulf, New Zealand

    Srinivasan, Mridula; Dassis, Mariela; Benn, Emily; Stockin, Karen A.; Martinez, Emmanuelle; Machovsky-Capuska, Gabriel E.

    2015-05-01

    Few studies have investigated regional and natural climate variability on seabird populations using ocean reanalysis datasets (e.g. Simple Ocean Data Assimilation (SODA)) that integrate atmospheric information to supplement ocean observations and provide improved estimates of ocean conditions. Herein we use a non-systematic dataset on Australasian gannets (Morus serrator) from 2001 to 2009 to identify potential connections between Gannet Sightings Per Unit Effort (GSPUE) and climate and oceanographic variability in a region of known importance for breeding seabirds, the Hauraki Gulf (HG), New Zealand. While no statistically significant relationships between GSPUE and global climate indices were determined, there was a significant correlation between GSPUE and regional SST anomaly for HG. Also, there appears to be a strong link between global climate indices and regional climate in the HG. Further, based on cross-correlation function coefficients and lagged multiple regression models, we identified potential leading and lagging climate variables, and climate variables but with limited predictive capacity in forecasting future GSPUE. Despite significant inter-annual variability and marginally cooler SSTs since 2001, gannet sightings appear to be increasing. We hypothesize that at present underlying physical changes in the marine ecosystem may be insufficient to affect supply of preferred gannet main prey (pilchard Sardinops spp.), which tolerate a wide thermal range. Our study showcases the potential scientific value of lengthy non-systematic data streams and when designed properly (i.e., contain abundance, flock size, and spatial data), can yield useful information in climate impact studies on seabirds and other marine fauna. Such information can be invaluable for enhancing conservation measures for protected species in fiscally constrained research environments.

  10. Hydrological evolution of Atlantis basin, Sirenum Terrae, Mars. Preliminar analysis of MOC and THEMIS images.

    de Pablo, M. A.; Márquez, A.; Centeno, J. D.

    The Atlantis basin is one of the martian highlands areas where there was proposed the existence of an ancient lake during the early geological history of Mars [1] [2] [3] [4]. The existence of some morphological features inside the basin and in the surrounding area, allow to check the existence of liquid water in the past of the planet. On the other hand, other morphological features indicate the existence of snow and liquid groundwater in recent times. The detailed study of the geomorphologic features allows to make an approach to the hydrological evolution of the Atlantis basin. The study of the geomorphology of this region has been carried out by means of the analysis of MOC high resolution images obtained by the Mars Global Surveyor mission and the THEMIS images, in the visible spectrum, sent by Mars Odyssey spacecrafts. The most clearly morphological feature indicative of the existence of water in the surface of Mars in the past are the numerous channels that end into Atlantis basin from the highest terrains. In addiction to these fluvial channels, the existence of mass flow deposits is also indicative of the existence of water in the area. Some of these slumps are in the internal slopes of impact craters, but others cover huge extensions around the chaotic terrains of the studied area. The lobated ejecta deposits observed in the Atlantis basin region are indicative of the existence of groundwater (solid or liquid) [5]. Serrated reliefs and tables in the borders of the basins are indicative of the existence of a water sheet. Beneath this water sheet some deposits was formed which was eroded, due to the gradual desiccation of the basin, forming the tables and serrated reliefs. The existence of different chaotic terrains in the area implies the existence of huge amounts of water under the surface according to the different models of chaotic terrain formation [6] [7]. The existence of groundwater could be decided by the existence of collapses in the near to the

  11. Ecology of selected marine communities in Glacier Bay: Zooplankton, forage fish, seabirds and marine mammals

    Robards, Martin D.; Drew, Gary S.; Piatt, John F.; Anson, Jennifer Marie; Abookire, Alisa A.; Bodkin, James L.; Hooge, Philip N.; Speckman, Suzann G.

    2003-01-01

    -Scidmore shelf, the Beardslee/Marble islands, and the upper arms of Glacier Bay were focal points of small schooling fish and zooplankton consuming marine birds and mammals. Comparisons between surveys and a prior study (1991) suggested that the assemblage of birds and marine mammals in the Bay is undergoing change. Most notable was a clear decline in Brachyramphus spp. murrelets while other apex species are increasing or remaining stable.It should be noted that many of the birds and mammals observed during this project, e.g. mergansers, do not forage on zooplankton and small schooling fish; rather they forage on benthic fish and sessile invertebrates. While distribution and sampling data for these marine predator species are valid, this study did not sample benthic fish and sessile invertebrates. Thus, recommendations made by this project should be interpreted as generally specific to the zooplankton/small schooling fish marine food web components of the Glacier Bay Ecosystem.

  12. Achieving a complete colonic evaluation in patients with incomplete colonoscopy is worth the effort.

    Ridolfi, Timothy J; Valente, Michael A; Church, James M

    2014-03-01

    Patients with an incomplete colonoscopy are potentially at risk for missed lesions. The purpose of this work was to identify the percentage of patients completing colonic evaluation after incomplete colonoscopy, the manner in which the evaluation was completed, and the incidence of significant pathology. This was a retrospective analysis of prospectively collected data. The study was conducted in an outpatient colonoscopy clinic in the colorectal surgery department of a tertiary referral center. Patients included those undergoing incomplete colonoscopy from a database of 25,645 colonoscopies performed from 1982 to 2009. Procedures aimed at completing colorectal evaluation were included in the study. Reason for incompletion, secondary study, its success, and findings were measured. A total of 242 patients with incomplete colonoscopies were identified; 166 (69%) were women. The average age of patients was 59 years. Most frequent causes for incomplete colonoscopy were inadequate preparation (34%), pain (30%), and tortuosity (20%). The scope could not pass the splenic flexure in 165 patients (71%). A total of 218 patients (90%) were offered completion studies, and 179 patients (82%) complied. Seventy-three of 82 patients who had a surveillance colonoscopy had a follow-up (89%), compared with 72 (87%) of 83 with symptoms and 40 (74%) of 54 who had a screening. Barium enema (BE) was performed in 74 (41%), repeat colonoscopy in 71 (40%), CT colonography in 17 (9%), and colonoscopy under general anesthesia in 9 patients (5%). Resection with intraoperative/perioperative colonoscopy was required in 8 patients (4%). Repeat colonoscopy found 32 lesions (24 tubular adenomas, 4 tubulovillous adenomas, and 4 sessile serrated polyps) in 17 patients (24%). Radiology demonstrated new abnormalities in 11 (12%) of 91 patients, prompting 7 colonoscopies. In 3 patients, colonoscopy showed an inverted appendix, a tubulovillous adenoma, and a sigmoid stricture. Overall, clinically

  13. Diagnostic accuracy of 18F-FDG PET/CT for detection of advanced colorectal adenoma

    Gollub, M.J.; Grewal, R.K.; Panu, N.; Thipphavong, S.; Sohn, M.; Zheng, J.; Moskowitz, C.S.

    2014-01-01

    Aim: To determine the accuracy of 2-[ 18 F]-fluoro-2-deoxy-D-glucose (FDG) positron-emission tomography (PET) in the detection of advanced colorectal adenomas. Materials and methods: In this retrospective study, patient consent was waived by the institutional review board. Combined FDG whole-body PET and computed tomography (CT) images (2000–2009) were re-read and compared with reports of complete colonoscopy performed up to 1 year after the PET examination. One or more areas of focal colonic uptake greater than the background indicated a positive PET result, irrespective of standardized uptake value (SUV). Lesion and patient-level measures of PET accuracy with their 95% confidence intervals (CI) were calculated. Results: One hundred and eighty patients undergoing colonoscopy with or without biopsy underwent PET within 1 year prior to colonoscopy. There were 92 women and 88 men (mean age 63.3 years). Indications for PET were extent of disease and treatment response in all cases. Patients had non-colorectal cancer (n = 160) or colon cancer (n = 20). One hundred and fourteen FDG-avid lesions were present. In 33, there was no colonoscopic correlate. Two hundred and fifty-eight biopsies revealed tubular adenomas (n = 91, one with intra-mucosal cancer), tubulovillous adenomas (n = 28), adenocarcinoma (n = 37), inflammation (n = 22), hyperplastic polyps (n = 54), serrated adenoma (n = 5), metastatic disease (n = 5), normal/benign mucosa or submucosal benign tumors (n = 13) or miscellaneous (n = 3). Per-lesion performance of PET showed a sensitivity of 38% (95% CI: 31–46; 64/167) for all adenomas and carcinomas and 58% (95% CI: 49–67; 57/98) for lesions ≥10 mm. At the patient level, for all adenomas and carcinomas the sensitivity was 54% (95% CI: 44–63; 61/113), specificity 100% (pre-defined), positive predictive value (PPV) 100% (pre-defined), and negative predictive value (NPV) 56% (95% CI: 47–65; 67/119). For patients with advanced

  14. CT findings of primary lung cancer

    Park, Yeon Won; Kim, So Seon; Woo, Young Hoon; Kim, Ho Joon; Chun, Byung Hee; Suh, Jung Hyek; Suh, Soo Jhi

    1985-01-01

    Authors retrospectively analyzed the CT findings of 102 cases of histologically proven bronchogenic carcinoma during last 4 years from January 1980 to July 1984 at Kosin Medical College. The results were as follows: 1. The sex ratio was 86 males to 16 females and the greatest number (66.7%) of cases were seen in fourth and fifth decades. 2. The distribution of histologic types of primary lung cancer as follows: Squamous cell carcinoma 66 cases, Adenocarcinoma 10 cases, Small cell carcinoma 7 cases, Large cell carcinoma 5 cases, Bronchioloalveolar cell carcinoma 1 case, Unclassified 13 cases. 3. Location of primary lesions as follows: Right lung 61 cases, Left lung 40 cases. In both lungs, the greatest number of cases were found in the upper lobes. Ratio between central and peripheral mass was 2.5:1, except adenocarcinoma (6:4). 4. CT findings were as follows: Hilar or central mass (75 cases), Peripheral mass (26), Bronchial abnormalities such as narrowing, obstruction, or displacement (60), Thickening of the posterior wall of the right upper lobe bronchus, bronchus intermedius, or left main bronchus (17), Post-obstructive changes; Atelectasis, Pneumonitis, Emphysema (34, 17, 1 respectively), Hilar adenopathy (21), Mediastinal lymph node enlargement (50), Mediastinal invasion (51), Pericardial thickening (5), SVC syndrome with collateral vessels (3), Pleural effusion (27), Pleural thickening or invasion (14), Chest wall invasion (2), Distant metastasis (26). 5. In most of patients (92 cases), the size of mass was above 3cm, but in 9 cases below 3cm. Margins of the masses were serrated or lobulated in most cases. In 5 cases, cavitary formations were noted, walls of which were thick and irregular, and air-fluid level was noted in 1 case. In 2 cases, eccentric calcification were noted within mass. 6. Among 51 cases of whom direct mediastinal invasion was suspected, 8 cases were operated upon, and this revealed that the masses were not resectable. Among the patients in

  15. Loss of Cdx2 expression in primary tumors and lymph node metastases is specific for mismatch repair-deficiency in colorectal cancer

    Heather eDawson

    2013-10-01

    Full Text Available Background: Approximately 20% of all colorectal cancers are hypothesized to arise from the serrated pathway characterized by mutation in BRAF, high-level CpG Island Methylator Phenotype (CIMP and microsatellite instability/mismatch repair (MMR-deficiency. MMR-deficient cancers show frequent losses of Cdx2, a homeodomain transcription factor. Here, we determine the predictive value of Cdx2 expression for MMR-deficiency and investigate changes in expression between primary cancers and matched lymph node metastases. Methods: Immunohistochemistry for Cdx2, Mlh1, Msh2, Msh6, and Pms2 was performed on whole tissue sections from 201 patients with primary colorectal cancer and 59 cases of matched lymph node metastases. Receiver operating characteristic (ROC curve analysis and Area under the Curve (AUC were investigated; association of Cdx2 with clinicopathological features and patient survival was carried out.Results Loss of Cdx2 expression was associated with higher tumor grade (p=0.0002, advanced pT (p=0.0166, and perineural invasion (p=0.0228. Cdx2 loss was an unfavorable prognostic factor in univariate (p=0.0145 and multivariate (p=0.0427; HR (95%CI: 0.58 (0.34-0.98 analysis. The accuracy (AUC for discriminating MMR-proficient and –deficient cancers was 87% (OR (95%CI:0.96 (0.95-0.98; p<0.0001. Specificity and negative predictive value for MMR-deficiency was 99.1% and 96.3%. 174 patients had MMR-proficient cancers, of which 60 (34.5% showed Cdx2 loss. Cdx2 loss in metastases was related to MMR-deficiency (p<0.0001. There was no difference in expression between primary tumors and matched metastases.Conclusion: Loss of Cdx2 is a sensitive and specific predictor of MMR-deficiency, but is not limited to these tumors, suggesting that events upstream of the development of MSI may impact Cdx2 expression.

  16. Morphometric characterisation of wing feathers of the barn owl Tyto alba pratincola and the pigeon Columba livia

    Klaas Michael

    2007-11-01

    Full Text Available Abstract Background Owls are known for their silent flight. Even though there is some information available on the mechanisms that lead to a reduction of noise emission, neither the morphological basis, nor the biological mechanisms of the owl's silent flight are known. Therefore, we have initiated a systematic analysis of wing morphology in both a specialist, the barn owl, and a generalist, the pigeon. This report presents a comparison between the feathers of the barn owl and the pigeon and emphasise the specific characteristics of the owl's feathers on macroscopic and microscopic level. An understanding of the features and mechanisms underlying this silent flight might eventually be employed for aerodynamic purposes and lead to a new wing design in modern aircrafts. Results A variety of different feathers (six remiges and six coverts, taken from several specimen in either species, were investigated. Quantitative analysis of digital images and scanning electron microscopy were used for a morphometric characterisation. Although both species have comparable body weights, barn owl feathers were in general larger than pigeon feathers. For both species, the depth and the area of the outer vanes of the remiges were typically smaller than those of the inner vanes. This difference was more pronounced in the barn owl than in the pigeon. Owl feathers also had lesser radiates, longer pennula, and were more translucent than pigeon feathers. The two species achieved smooth edges and regular surfaces of the vanes by different construction principles: while the angles of attachment to the rachis and the length of the barbs was nearly constant for the barn owl, these parameters varied in the pigeon. We also present a quantitative description of several characteristic features of barn owl feathers, e.g., the serrations at the leading edge of the wing, the fringes at the edges of each feather, and the velvet-like dorsal surface. Conclusion The quantitative

  17. Reappraisal of Rhamdia branneri Haseman, 1911 and R. voulezi Haseman, 1911 (Siluriformes: Heptapteridae from the rio Iguaçu with notes on their morphometry and karyotype

    Julio Cesar Garavello

    Full Text Available ABSTRACT The species Rhamdia branneri Haseman, 1911 and the subspecies Rhamdia branneri voulezi Haseman, 1911 from rio Iguaçu are currently recognized as synonyms of Rhamdia quelen (Quoy & Gaimard, 1824. However, recent karyotype and ecomorphology studies distinguish R. branneri and R. voulezi as different species. Examination of Rhamdia populations from rio Iguaçu, including type specimens, together with other congeners from rio Tibagi, allowed to properly reexamine the situation of these Haseman's taxa and references given to Rhamdia in the Iguaçu. The species R. branneri and R. voulezi have strong serrae with large basis on both margins of the pectoral-fin spine, uncommon in the remaining species of Rhamdia and different from the fine serrate margins of the pectoral spine of R. quelen ; a regular dorsal profile, slightly curved between supraoccipital and dorsal fin; with dorsal dark-brown or light-gray coloration along body, abdomen pale, without profuse small black spots, common in populations of the upper Paraná species and the type-material of R. quelen . Also the following morphometric characters discriminate these species: Rhamdia voulezi , adipose fin elongate; smaller distance between dorsal and adipose fin; smaller length between adipose fin to base of caudal fin and smaller distance from posterior margin of eye to opercular border. Rhamdia branneri , larger distance from dorsal and adipose fins; deeper caudal peduncle; higher trunk depth in the vertical distance through adipose, between pelvic and anal fins; larger scapular bridge; shorter maxillary barbel; shorter external mental barbel; shorter interorbital distance; shorter length of dorsal fin basis and shorter adipose-fin base length. A PCA between the populations of Rhamdia from Iguaçu and a population from rio Tibagi, upper Paraná basin, discriminates the population from Tibagi on basis of dorsal to adipose fin distance, dorsal-fin spine length, maxillary barbel length

  18. NASA Tech Briefs, May 2010

    2010-01-01

    Topics covered include: Instrument for Analysis of Greenland's Glacier Mills Cryogenic Moisture Apparatus; A Transportable Gravity Gradiometer Based on Atom Interferometry; Three Methods of Detection of Hydrazines; Crossed, Small-Deflection Energy Analyzer for Wind/Temperature Spectrometer; Wavefront Correction for Large, Flexible Antenna Reflector; Novel Micro Strip-to-Waveguide Feed Employing a Double-Y Junction; Thin-Film Ferro Electric-Coupled Microstripline Phase Shifters With Reduced Device Hysteresis; Two-Stage, 90-GHz, Low-Noise Amplifier; A 311-GHz Fundamental Oscillator Using InP HBT Technology; FPGA Coprocessor Design for an Onboard Multi-Angle Spectro-Polarimetric Imager; Serrating Nozzle Surfaces for Complete Transfer of Droplets; Turbomolecular Pumps for Holding Gases in Open Containers; Triaxial Swirl Injector Element for Liquid-Fueled Engines; Integrated Budget Office Toolbox; PLOT3D Export Tool for Tecplot; Math Description Engine Software Development Kit; Astronaut Office Scheduling System Software; ISS Solar Array Management; Probabilistic Structural Analysis Program; SPOT Program; Integrated Hybrid System Architecture for Risk Analysis; System for Packaging Planetary Samples for Return to Earth; Offset Compound Gear Drive; Low-Dead-Volume Inlet for Vacuum Chamber; Simple Check Valves for Microfluidic Devices; A Capillary-Based Static Phase Separator for Highly Variable Wetting Conditions; Gimballing Spacecraft Thruster; Finned Carbon-Carbon Heat Pipe with Potassium Working Fluid; Lightweight Heat Pipes Made from Magnesium; Ceramic Rail-Race Ball Bearings; Improved OTEC System for a Submarine Robot; Reflector Surface Error Compensation in Dual-Reflector Antennas; Enriched Storable Oxidizers for Rocket Engines; Planar Submillimeter-Wave Mixer Technology with Integrated Antenna; Widely Tunable Mode-Hop-Free External-Cavity Quantum Cascade Laser; Non-Geiger-Mode Single-Photon Avalanche Detector with Low Excess Noise; Using Whispering

  19. Razanandrongobe sakalavae, a gigantic mesoeucrocodylian from the Middle Jurassic of Madagascar, is the oldest known notosuchian

    Cristiano Dal Sasso

    2017-07-01

    Full Text Available Razanandrongobe sakalavae Maganuco, Dal Sasso & Pasini, 2006 is a large predatory archosaur from the Middle Jurassic (Bathonian of the Mahajanga Basin, NW Madagascar. It was diagnosed on the basis of teeth and a fragmentary maxilla, but its affinities were uncertain. Here we describe new cranial remains (above all, an almost complete right premaxilla and a caudally incomplete left dentary that greatly improve our knowledge on this enigmatic species and reveal its anatomy to be crocodylomorph. The right premaxilla indicates that the rostrum was deep, wide, and not pointed; it bears five teeth that are sub-vertical and just slightly curved lingually; the mesial teeth are U-shaped in cross-section and have serrated carinae on the lingual side; the aperturae nasi osseae (external bony nares are confluent and face rostrally; and there is no lateral groove at the premaxillomaxillary suture for reception of a hypertrophied lower caniniform tooth. The preserved portion of the left dentary has an edentulous tip and bears eight large mandibular teeth of which the mesial (1–3 are the largest, but none is a hypertrophied caniniform tooth; the mandibular (dentary symphysis extends caudally to the level of the third tooth; the splenial is not preserved, but its sutural marks on the dentary indicate that it contributed to the mandibular symphysis for at least 20% of the symphyseal length in dorsal aspect. On the basis of this new data, some previously uncertain features of the holotype maxilla—such as the margin of the suborbital fenestra, the contact surfaces for the palatine, the ectopterygoid, and the jugal—are now apparent. Testing of the phylogenetic position of the species within Crocodylomorpha indicates that R. sakalavae is a mesoeucrocodylian. It also represents one of the earliest events of exacerbated increase in body size along the evolutionary history of the group. In addition, it is by far the oldest notosuchian. A cranial reconstruction of

  20. Full-scale flight tests of aircraft morphing structures using SMA actuators

    Mabe, James H.; Calkins, Frederick T.; Ruggeri, Robert T.

    2007-04-01

    In August of 2005 The Boeing Company conducted a full-scale flight test utilizing Shape Memory Alloy (SMA) actuators to morph an engine's fan exhaust to correlate exhaust geometry with jet noise reduction. The test was conducted on a 777-300ER with GE-115B engines. The presence of chevrons, serrated aerodynamic surfaces mounted at the trailing edge of the thrust reverser, have been shown to greatly reduce jet noise by encouraging advantageous mixing of the free, and fan streams. The morphing, or Variable Geometry Chevrons (VGC), utilized compact, light weight, and robust SMA actuators to morph the chevron shape to optimize the noise reduction or meet acoustic test objectives. The VGC system was designed for two modes of operation. The entirely autonomous operation utilized changes in the ambient temperature from take-off to cruise to activate the chevron shape change. It required no internal heaters, wiring, control system, or sensing. By design this provided one tip immersion at the warmer take-off temperatures to reduce community noise and another during the cooler cruise state for more efficient engine operation, i.e. reduced specific fuel consumption. For the flight tests a powered mode was added where internal heaters were used to individually control the VGC temperatures. This enabled us to vary the immersions and test a variety of chevron configurations. The flight test demonstrated the value of SMA actuators to solve a real world aerospace problem, validated that the technology could be safely integrated into the airplane's structure and flight system, and represented a large step forward in the realization of SMA actuators for production applications. In this paper the authors describe the development of the actuator system, the steps required to integrate the morphing structure into the thrust reverser, and the analysis and testing that was required to gain approval for flight. Issues related to material strength, thermal environment, vibration