WorldWideScience

Sample records for merchant vessels

  1. Merchant marine nuclear-powered vessels

    International Nuclear Information System (INIS)

    Khlopkin, N.S.; Zotov, A.P.

    1997-01-01

    The history of civil nuclear-powered vessels development in Russia is highlighted. Advantages of nuclear propulsion for icebreakers operating in the Arctic are discussed. The operation of nuclear-powered icebreakers and the nuclear lighters-aboard ship in the Arctic has changed the situation on the Northern Sea Way. The all year round navigation there now is a reality. The reliability, safety and ecological cleanness of nuclear-powered vessels are discussed. The necessity of internationally recognized standards, rules and codes for safe operation of nuclear-powered trade vessels is underlined. (orig.)

  2. Economic and Environmental Impact Trade-Offs Related to In-Water Hull Cleanings of Merchant Vessels

    DEFF Research Database (Denmark)

    Pagoropoulos, Aris; Kjær, Louise Laumann; Dong, Yan

    2017-01-01

    Merchant vessels are equipped with antifouling systems to prevent accumulation of marine organisms on the hull—a phenomenon known as fouling. In many cases, however, fouling accumulates and in-water hull cleaning is required. Hull cleanings are part of a hull management scheme, and although...... with the frequency of hull cleanings within the hull management scheme. Our analysis revealed a convex relationship between the frequency of hull cleanings and fuel savings. The higher the frequency of hull cleanings, the less fuel savings can be achieved per cleaning. In terms of costs, from some point on the costs...... of the service are likely to offset the savings—especially if fuel prices are low. In regards to climate change, avoided emissions due to fuel savings are likely to outweigh the limited impacts from the service itself. Last, while ecosystem impacts from marine, terrestrial, and freshwater eco-toxicity are likely...

  3. Autonomous Unmanned Merchant Vessel and its Contribution towards the e-Navigation Implementation: The MUNIN Perspective

    Directory of Open Access Journals (Sweden)

    Hans-Christoph Burmeister

    2014-12-01

    Full Text Available While IMO's e-Navigation project's scope is to enhance safety of navigation by improved ship-to-shore-cooperation, the EU's FP7 project MUNIN's aim is to develop a concept for an autonomous dry bulk carrier, that is at least as safe as a manned vessel. As e-Navigation has a strong focus on improving the human element in shipping and MUNIN tends towards an unmanned bridge, a common baseline might look quite contradictory at first, but they share the need to ensure and enhance the safety of navigation. After an introduction into e-Navigation and the MUNIN project, this paper will demonstrate with two examples, how MUNIN's results address identified e-Navigation's gaps and addresses e-Navigation's user needs. Thus, MUNIN contributes to the development and implementation of the prioritized e-Navigation solutions.

  4. Barry Merchant's new novel

    DEFF Research Database (Denmark)

    Johansen, Ib

    2016-01-01

    Review of Barry Merchant: A Quest for Self Discovery: An East End lad battles poverty and depression in his search for God and redemption. Mereo Books, 2016.......Review of Barry Merchant: A Quest for Self Discovery: An East End lad battles poverty and depression in his search for God and redemption. Mereo Books, 2016....

  5. Merchant Seamen Monument

    OpenAIRE

    1991-01-01

    Postcard. Colour photograph of Merchant Seamen Monument. Printed description on reverse "This memorial was erected in remembrance of the merchant seamen from Limerick and the Shannon Estuary Seamen who lost their lives in the course of duty". 1991 Limerick Treaty 300 logo.

  6. Marketing Strategy for Merchant Shipbuilders

    Science.gov (United States)

    1995-01-01

    1995 Ship Production Symposium Paper No. 26: Marketing Strategy for Merchant Shipbuilders U.S. DEPARTMENT OF THE NAVY CARDEROCK DIVISION, NAVAL...Production Symposium Paper No. 26: Marketing Strategy for Merchant Shipbuilders 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6... Marketing Strategy for Merchant Shipbuilders Paul W. Stott (V), A&P Appledore international, U.K. ABSTRACT Much has been published over the years about

  7. MERCHANT MARINE SHIP REACTOR

    Science.gov (United States)

    Mumm, J.F.; North, D.C. Jr.; Rock, H.R.; Geston, D.K.

    1961-05-01

    A nuclear reactor is described for use in a merchant marine ship. The reactor is of pressurized light water cooled and moderated design in which three passes of the water through the core in successive regions of low, intermediate, and high heat generation and downflow in a fuel region are made. The foregoing design makes a compact reactor construction with extended core life. The core has an egg-crate lattice containing the fuel elements confined between a lower flow baffle and upper grid plate, with the latter serving also as part of a turn- around manifold from which the entire coolant is distributed into the outer fuel elements for the second pass through the core. The inner fuel elements are cooled in the third pass.

  8. Casualty data analysis of the world merchant fleet for reported fire and explosion incidents resulting in marine pollution

    Science.gov (United States)

    1995-02-01

    World wide merchant vessel fire and explosion data were analyzed to determine the contribution of these casualties to the marine pollution problem. The source of information is the Lloyd's Casualty Information System Data Base. The major findings of ...

  9. Development of the merchant plant

    Energy Technology Data Exchange (ETDEWEB)

    Wolfinger, R.; Gilliss, M.B.

    1998-07-01

    The co-authors of this paper are currently involved in over 1500 megawatts of merchant plant developments in the US. This paper will discuss the latest in combined cycle steam reheat ``H and G'' technology. Big improvements in heat rates along with substantial drop in installed cost will make this power cycle the leading merchant plant of the future. This paper will compare the actual present day performance and clearing price of a state-of-the-art merchant plant versus utility dispatch cost duration curves, known as ``system lambda''. Deregulation of the power market will ultimately provide an open market for these efficient plants to compete effectively against aging utility plants. Comparison of utility system heat rates versus merchant plant heat rates along with an increase need for generation capacity and forecasts of stable gas prices supports to the potential for a large scale building program of these high efficiency generators. This paper will also review the capacity crunch in the Northeast and Wisconsin and how problems with nuclear plants may accelerate the need for merchant plants. This paper will compare the required capacity for the population growth in the SERC Region and in Florida and how this will produce a potential ``hot bed'' for merchant plant development.

  10. Development of the merchant plant

    International Nuclear Information System (INIS)

    Wolfinger, R.; Gilliss, M.B.

    1998-01-01

    The co-authors of this paper are currently involved in over 1500 megawatts of merchant plant developments in the US. This paper will discuss the latest in combined cycle steam reheat ''H and G'' technology. Big improvements in heat rates along with substantial drop in installed cost will make this power cycle the leading merchant plant of the future. This paper will compare the actual present day performance and clearing price of a state-of-the-art merchant plant versus utility dispatch cost duration curves, known as ''system lambda''. Deregulation of the power market will ultimately provide an open market for these efficient plants to compete effectively against aging utility plants. Comparison of utility system heat rates versus merchant plant heat rates along with an increase need for generation capacity and forecasts of stable gas prices supports to the potential for a large scale building program of these high efficiency generators. This paper will also review the capacity crunch in the Northeast and Wisconsin and how problems with nuclear plants may accelerate the need for merchant plants. This paper will compare the required capacity for the population growth in the SERC Region and in Florida and how this will produce a potential ''hot bed'' for merchant plant development

  11. The city of the merchant

    DEFF Research Database (Denmark)

    Barnow, Niels Finn

    The City of the Merchant deals with cities, towns and villages in the European medieval period - i.e. in post-antique and pre-industrial Europe. In actual fact, the book mainly deals with Denmark and Northern Italy (the City States), with digressions to other "feudal" localities in France on Sicily...

  12. Tamil merchant in ancient Mesopotamia.

    Directory of Open Access Journals (Sweden)

    Malliya Gounder Palanichamy

    Full Text Available Recent analyses of ancient Mesopotamian mitochondrial genomes have suggested a genetic link between the Indian subcontinent and Mesopotamian civilization. There is no consensus on the origin of the ancient Mesopotamians. They may be descendants of migrants, who founded regional Mesopotamian groups like that of Terqa or they may be merchants who were involved in trans Mesopotamia trade. To identify the Indian source population showing linkage to the ancient Mesopotamians, we screened a total of 15,751 mitochondrial DNAs (11,432 from the literature and 4,319 from this study representing all major populations of India. Our results although suggest that south India (Tamil Nadu and northeast India served as the source of the ancient Mesopotamian mtDNA gene pool, mtDNA of these ancient Mesopotamians probably contributed by Tamil merchants who were involved in the Indo-Roman trade.

  13. Tamil Merchant in Ancient Mesopotamia

    Science.gov (United States)

    Palanichamy, Malliya gounder; Mitra, Bikash; Debnath, Monojit; Agrawal, Suraksha; Chaudhuri, Tapas Kumar; Zhang, Ya-Ping

    2014-01-01

    Recent analyses of ancient Mesopotamian mitochondrial genomes have suggested a genetic link between the Indian subcontinent and Mesopotamian civilization. There is no consensus on the origin of the ancient Mesopotamians. They may be descendants of migrants, who founded regional Mesopotamian groups like that of Terqa or they may be merchants who were involved in trans Mesopotamia trade. To identify the Indian source population showing linkage to the ancient Mesopotamians, we screened a total of 15,751 mitochondrial DNAs (11,432 from the literature and 4,319 from this study) representing all major populations of India. Our results although suggest that south India (Tamil Nadu) and northeast India served as the source of the ancient Mesopotamian mtDNA gene pool, mtDNA of these ancient Mesopotamians probably contributed by Tamil merchants who were involved in the Indo-Roman trade. PMID:25299580

  14. Tamil merchant in ancient Mesopotamia.

    Science.gov (United States)

    Palanichamy, Malliya Gounder; Mitra, Bikash; Debnath, Monojit; Agrawal, Suraksha; Chaudhuri, Tapas Kumar; Zhang, Ya-Ping

    2014-01-01

    Recent analyses of ancient Mesopotamian mitochondrial genomes have suggested a genetic link between the Indian subcontinent and Mesopotamian civilization. There is no consensus on the origin of the ancient Mesopotamians. They may be descendants of migrants, who founded regional Mesopotamian groups like that of Terqa or they may be merchants who were involved in trans Mesopotamia trade. To identify the Indian source population showing linkage to the ancient Mesopotamians, we screened a total of 15,751 mitochondrial DNAs (11,432 from the literature and 4,319 from this study) representing all major populations of India. Our results although suggest that south India (Tamil Nadu) and northeast India served as the source of the ancient Mesopotamian mtDNA gene pool, mtDNA of these ancient Mesopotamians probably contributed by Tamil merchants who were involved in the Indo-Roman trade.

  15. Evaluating the merchant transmission market

    International Nuclear Information System (INIS)

    Hsieh, E.; Bartholomew Fisher, E.

    2007-01-01

    This paper reviewed the North American bulk electric transmission system, with particular reference to the following merchant power transmission projects that have applied to sell transmission at negotiated rates by the Federal Energy Regulatory Commission (FERC): Cross Sound Cable; Neptune Phase 1; TransCanada's Northern Lights HVDC line; Montana Alberta Tie; Juan de Fuca Cable; Linden VFT; Connecticut-Long Island Cable; Lake Erie Link; Empire Connection; Harbor Cable; Chesapeake Transmission; and the Neptune/Green Line. The projects were sorted by status as either active, inactive and restructured. Each summary included the interconnection points, capacity, and sponsor. This paper also identified the major hurdles in their approvals. The relative success of the merchant transmission framework in attracting new investment was then reviewed. The successful projects shared 3 common attributes. They connected areas with large price differentials and they used advanced flow control technology such as HVDC, PARs, and VFTs. The successful projects also bridged some type of border, either geographic, electrical, economic, or a combination. Three of the active projects crossed the Canadian-US border, while the other 3 connected New York City to neighbouring regions. It was shown that merchant transmission fills a niche, enabling market responses to connect areas that may be overlooked by a regional planning process. 27 refs

  16. 46 CFR 15.1107 - Maintenance of merchant mariners' records by owner or operator.

    Science.gov (United States)

    2010-10-01

    ... information is maintained throughout his or her service, and is readily accessible to those in management...., record of training completed, and of relevant on-the-job experience acquired). (c) Competency in assigned... vessel shall ensure that procedures are in place, in respect of each merchant mariner holding a license...

  17. The city of the merchant

    DEFF Research Database (Denmark)

    Barnow, Niels Finn

    The City of the Merchant deals with cities, towns and villages in the European medieval period - i.e. in post-antique and pre-industrial Europe. In actual fact, the book mainly deals with Denmark and Northern Italy (the City States), with digressions to other "feudal" localities in France on Sici......, in the middle East, the Crusades, in Germany (the Hansatic League) and, finally, as far a field as the Danish West Indies. The book is part of a larger project that comprises other historical environments....

  18. Regulatory Issues Surrounding Merchant Interconnection

    International Nuclear Information System (INIS)

    Kuijlaars, Kees-Jan; Zwart, Gijsbert

    2003-11-01

    We discussed various issues concerning the regulatory perspective on private investment in interconnectors. One might claim that leaving investment in transmission infrastructure to competing market parties is more efficient than relying on regulated investment only (especially in the case of long (DC) lines connecting previously unconnected parts of the grids, so that externalities from e.g. loop flows do not play a significant role). We considered that some aspects of interconnection might reduce these market benefits. In particular, the large fixed costs of interconnection construction may lead to significant under investment (due to both first mover monopoly power and the fact that part of generation cost efficiencies realised by interconnection are not captured by the investor itself, and remain external to the investment decision). Second, merchant ownership restricts future opportunities for adaptation of regulation, as would be required e.g. for introduction of potentially more sophisticated methods of congestion management or market splitting. Some of the disadvantages of merchant investment may be mitigated however by a suitable regulatory framework, and we discussed some views in this direction. The issues we discussed are not intended to give a complete framework, and detailed regulation will certainly involve many more specific requirements. Areas we did not touch upon include e.g. the treatment of deep connection costs, rules for operation and maintenance of the line, and impact on availability of capacity on other interconnections

  19. Dutch Commerce and Chinese Merchants in Java

    OpenAIRE

    Claver, A.

    2014-01-01

    Dutch Commerce and Chinese Merchants in Java describes the vanished commercial world of colonial Java. Alexander Claver shows the challenges of a demanding business environment by highlighting trade and finance mechanisms, and the relationships between the participants involved.

  20. Gypsies, Jews, and "The Merchant of Venice."

    Science.gov (United States)

    McKendy, Thomas

    1988-01-01

    Shows how looking at Shakespeare's prejudices and their roots, as seen in "The Merchant of Venice," can teach students not only about historical attitudes but also about their own unacknowledged assumptions and stereotypes. (MM)

  1. Compatible volume-taper equations for predicting merchantable ...

    African Journals Online (AJOL)

    Compatible systems of merchantable total tree cubic volume and stem taper equations are derived by integrating an existing volume equation. The systems are developed to yield volume at any merchantable length, total volume and for any merchantable top diameter. It is also demonstrated that the most common types of ...

  2. Historic survey on nuclear merchant ships

    International Nuclear Information System (INIS)

    Freire, Luciano Ondir; Andrade, Delvonei Alves de

    2015-01-01

    Highlights: • The nuclear merchants ships already built are described and studied. • Their history and main architectural choices are presented, focusing nuclear domain. • The typical problems in those projects are discussed. • Some key factors for developing successful nuclear merchant ships are identified. - Abstract: This work provides a survey on past nuclear merchant ships experience. On light of new regulations on CO 2 , SO x and NO x , the options for clean naval propulsion need to be studied. Despite many efforts, the only already sea proven emissions-free energy is nuclear power of pressurized water reactor type. Given the past experience on the field, this work provides some information on history, architectures and hints of reasons for the success or failures of each project. It is found that adequate requirements identification must be done keeping economics always in the center of design. Experience shows, except after major catastrophic accidents, public trust may be earned by open dialog and sound engineering practices.

  3. 77 FR 31518 - Validation of Merchant Mariners' Vital Information and Issuance of Coast Guard Merchant Mariner's...

    Science.gov (United States)

    2012-05-29

    ..., which were necessary to improve maritime safety and promote the national security interest of the United... Merchant Mariner Licensing and Documentation program, which were necessary to improve maritime safety and... INFORMATION CONTACT: If you have questions on this rule, call or email Mr. Gerald Miante, Maritime Personnel...

  4. Merchant Banks Fortunes And Structureal Challenges Of Universal ...

    African Journals Online (AJOL)

    This study examined universal banking and its impact on the fortunes merchant banks in the Port Harcourt business environment. To achieve the purpose of the study, questionnaire and personal interview instruments were used, and this involved 15 executives of five merchant banks operating in Port Harcourt metropolis.

  5. Total tree, merchantable stem and branch volume models for ...

    African Journals Online (AJOL)

    Total tree, merchantable stem and branch volume models for miombo woodlands of Malawi. Daud J Kachamba, Tron Eid. Abstract. The objective of this study was to develop general (multispecies) models for prediction of total tree, merchantable stem and branch volume including options with diameter at breast height (dbh) ...

  6. 78 FR 21134 - Merchant Mariner Medical Advisory Committee; Vacancy

    Science.gov (United States)

    2013-04-09

    ... consideration for appointment as members to the Merchant Mariner Medical Advisory Committee (MEDMAC). MEDMAC provides advice to the United States Coast Guard on matters related to medical certification determinations... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2011-1114] Merchant Mariner Medical...

  7. 76 FR 77546 - Merchant Mariner Medical Advisory Committee; Vacancy

    Science.gov (United States)

    2011-12-13

    ... Guard seeks applications for membership on the Merchant Mariner Medical Advisory Committee. This Committee provides advice to the Coast Guard on matters related to medical certification determinations for... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2011-1114] Merchant Mariner Medical...

  8. [The wine merchant as weight watcher].

    Science.gov (United States)

    Rössner, S

    1996-01-01

    Berry Brothers & Rudd Ltd are a company of wine merchants, based in central London, with traditions dating from the 18th century. From the beginning the company traded in colonial goods. This required a pair of scales. Buying coffe became an opportunity for a weighing session for the customers and over the years since 1765 weight records from the British nobility and gentry are available in seven leatherbound ledgers. Several interesting weight histories can be documented by the study of these well kept records. They illustrate that there was a need to measure body weight, long before the association between relative body weight and health had become clear.

  9. A view of merchant coke in Shanxi Province of China

    Energy Technology Data Exchange (ETDEWEB)

    Li Naiyi [Xin Yuan Law Firm, Beijing (China)

    2003-07-01

    The paper describes the production of merchant coke in Shanxi province both before and after 1999. Production by beehive ovens reached a peak in 1995. Despite being banned in 1996 this technology was used until the end of 2000. Since 2000, advanced machinery recovery ovens with carbonization chambers of over 3 or 4 metres have been built, along with non-recovery 'clean beehive ovens'. The supply and demand of merchant coke, from Shanxi is discussed. Recently 75% of China's merchant coke has been produced in Shanxi.

  10. Two is Company, N is a Crowd? Merchant Guilds and Social Capital

    OpenAIRE

    Dessi, Roberta; Piccolo, Salvatore

    2009-01-01

    Local merchant guilds were ubiquitous in medieval Europe, and their development was inextricably linked with the development of towns and the rise of the merchant class. We develop a theory of the emergence of local merchant guilds as an efficient mechanism to implement collusion among merchants and rulers, building on the natural complementarity between merchants’ market trading and mutual monitoring. Our model explains the main observed features of local merchant guilds’ behavior, their rul...

  11. Vessel Operating Units (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for vessels that are greater than five net tons and have a current US Coast Guard documentation number. Beginning in1979, the NMFS...

  12. LITERATURE CURRICULUM III--TEST FOR "THE MERCHANT OF VENICE."

    Science.gov (United States)

    KITZHABER, ALBERT R.

    THIS TEST--"THE MERCHANT OF VENICE"--WAS DESIGNED BY THE OREGON CURRICULUM STUDY CENTER FOR A NINTH-GRADE LITERATURE CURRICULUM. IT IS INTENDED TO ACCOMPANY CURRICULUM UNITS AVAILABLE AS ED 010 815 AND ED 010 816. (MM)

  13. 12 CFR 225.174 - What aggregate thresholds apply to merchant banking investments?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What aggregate thresholds apply to merchant banking investments? 225.174 Section 225.174 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF...) Regulations Merchant Banking Investments § 225.174 What aggregate thresholds apply to merchant banking...

  14. 12 CFR 1500.5 - What aggregate thresholds apply to merchant banking investments?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What aggregate thresholds apply to merchant banking investments? 1500.5 Section 1500.5 Banks and Banking DEPARTMENT OF THE TREASURY GENERAL PROVISIONS MERCHANT BANKING INVESTMENTS § 1500.5 What aggregate thresholds apply to merchant banking investments? (a...

  15. 12 CFR 1500.3 - What are the holding periods permitted for merchant banking investments?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What are the holding periods permitted for merchant banking investments? 1500.3 Section 1500.3 Banks and Banking DEPARTMENT OF THE TREASURY GENERAL PROVISIONS MERCHANT BANKING INVESTMENTS § 1500.3 What are the holding periods permitted for merchant banking...

  16. Merchant electricity transmission expansion: A European case study

    International Nuclear Information System (INIS)

    Kristiansen, T.; Rosellon, J.

    2010-01-01

    We apply a merchant transmission model to the trilateral market coupling (TLC) arrangement among the Netherlands, Belgium and France as an example, and note that it could further be applied to other market splitting or coupling of Europe's different national power markets. In this merchant framework the system operator allocates financial transmission rights (FTRs) to investors in transmission expansion based upon their preferences, and revenue adequacy. The independent system operator (ISO) preserves some proxy FTRs to manage potential negative externalities that may result from expansion projects. This scheme could help European market coupling arrangements attract additional investment. (author)

  17. Research vessels

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, P.S.

    The role of the research vessels as a tool for marine research and exploration is very important. Technical requirements of a suitable vessel and the laboratories needed on board are discussed. The history and the research work carried out...

  18. A Teacher's Guide for "The Merchant of Venice" and "Othello."

    Science.gov (United States)

    WGBH-TV, Boston, MA.

    William Shakespeare has influenced most, if not all, Western playwrights. His techniques, themes, characters, and plots are contained in much of what is produced today, from television to Broadway. This teacher's guide provides summaries of the plays "The Merchant of Venice" and "Othello," essays, and corresponding student…

  19. 77 FR 11142 - Merchant Marine Personnel Advisory Committee: Intercessional Meeting

    Science.gov (United States)

    2012-02-24

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-0133] Merchant Marine Personnel... at the Hilton San Francisco Airport Bayfront Hotel, 600 Airport Blvd., Burlingame, CA 94010. For..., we are inviting public comment on the issues to be considered by the working group, which are listed...

  20. 78 FR 33855 - Merchant Mariner Medical Advisory Committee: Intercessional Meeting

    Science.gov (United States)

    2013-06-05

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2011-0138] Merchant Mariner Medical..., Maryland 20674-0075. For further information about the Paul Hall Center hotel facilities or services for... participation, we are inviting public comment on the issues to be considered by the working groups as listed in...

  1. 77 FR 65570 - Merchant Marine Personnel Advisory Committee: Intercessional Meeting

    Science.gov (United States)

    2012-10-29

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2012-0968] Merchant Marine Personnel... hotel facilities or services for individuals with disabilities or to request special assistance, contact... comment on the issues to be considered by the work group, which are listed in the ``Agenda'' section below...

  2. MERCHANT OF VENICE. LITERATURE CURRICULUM III, TEACHER VERSION.

    Science.gov (United States)

    KITZHABER, ALBERT R.

    THIS TEACHING GUIDE ON "THE MERCHANT OF VENICE" WAS PREPARED FOR USE IN A NINTH-GRADE LITERATURE CURRICULUM. THE PURPOSE OF THE GUIDE WAS TO ILLUMINATE THE PLAY AS A WHOLE, AND TO SUGGEST TO THE TEACHER SOME USEFUL PRINCIPLES FOR FRAMING QUESTIONS AND GUIDING DISCUSSIONS IN THE CLASSROOM. THE GUIDE WAS NOT TO BE USED, HOWEVER, AS A BASE…

  3. Case Studies in Censorship: Censoring "The Merchant of Venice."

    Science.gov (United States)

    Gray, Richard A.

    1991-01-01

    Reviews censorship of "The Merchant of Venice," which has been based on its portrayal of the Jewish character Shylock. Background information is followed by an annotated bibliography which includes 15 citations dealing with Shylock, 22 citations to articles that address the censorship of the play, and 64 works of literature that have…

  4. THE MERCHANT OF VENICE. LITERATURE CURRICULUM III, STUDENT VERSION.

    Science.gov (United States)

    KITZHABER, ALBERT R.

    A GUIDE WAS PRODUCED FOR STUDENT USE IN NINTH-GRADE STUDY OF "THE MERCHANT OF VENICE." THE GUIDE PRESENTED SEVERAL ALTERNATE APPROACHES FOR UNDERSTANDING THE PLAY AND LEARNING ITS CONTENT. A MAJOR EMPHASIS OF THE GUIDE WAS PLACED ON THREE FORMS OF STUDENT QUESTIONS, RELATED TO SPECIFIC ACTS AND SCENES, THE CHARACTERS IN THE DRAMA, AND…

  5. Psychoactive substances consumption in French fishermen and merchant seamen.

    Science.gov (United States)

    Fort, Emmanuel; Massardier-Pilonchéry, Amélie; Bergeret, Alain

    2010-06-01

    The aim of this study is to assess tobacco consumption, nicotine dependence as diagnosed by Fagerström test, alcohol consumption, alcohol dependence as diagnosed by CAGE questionnaire and drug consumption in French seamen. Results are presented according to job category: fishermen and merchant seamen. French seamen were recruited from a stratified survey of 19 ports in France. Subjects completed a questionnaire during their annual medical check-up. The questionnaire covered demographic and professional items, tobacco, alcohol and drug consumption behaviour. Nicotine and alcohol dependence were, respectively, assessed by the Fagerström Test for Nicotine Dependence (FTND) and a French version of the CAGE questionnaire. A urine test was used to detect cannabis derivatives. Prevalence rates for current smoking and daily alcohol consumption were higher in fishermen than merchant seamen. The prevalence of nicotine dependence on FTND was likewise higher in fisherman smokers, who also showed more intense smoking behaviour. The category of seamen did not correlate with alcohol addiction, but differences in alcohol-related behaviour emerged between fishermen and merchant seamen. Prevalence of cannabis and other drug use was higher in merchant seamen, although the two categories of seaman did not differ with respect to recent use of cannabis. Demographic factors cannot fully explain these differences, as multivariate analysis showed significantly greater risks in marine fisheries. Alcohol and tobacco consumption are a major public health problem for seafarers. Fishermen seem to be more liable to high consumption. Working conditions may explain these differences.

  6. 78 FR 63232 - Merchant Marine Personnel Advisory Committee

    Science.gov (United States)

    2013-10-23

    ... Director of Commercial Regulations and Standards on matters relating to personnel in the U.S. merchant marine, including but not limited to training, qualifications, certification, documentation, and fitness... judgment to the Secretary. A copy of all meeting documentation is available at https://homeport.uscg.mil by...

  7. PESTICIDES USE AMONG GRAIN MERCHANTS IN MUBI GRAIN ...

    African Journals Online (AJOL)

    AGROSEARCH UIL

    Key words: Pesticides, food security, grain merchants, storage, perception. INTRODUCTION. Food security in sub-Saharan Africa largely depends upon improved food productivity through the use of sustainable agricultural practices and the reduction of post-harvest losses caused by pests and diseases (Adedire, 2001).

  8. Pesticides Use among Grain Merchants in Mubi Grain Markets of ...

    African Journals Online (AJOL)

    It is, therefore, recommended that farmers, retailers, distributors and all the pesticide workers should undergo regular training/workshop on the use and safety measures of pesticides. Also multimedia awareness activities in local language should be massively conducted. Key words: Pesticides, food security, grain merchants ...

  9. Research, Action, and Participation: The Merchant Shipping Case.

    Science.gov (United States)

    Walton, Richard E.; Gaffney, Michael E.

    1989-01-01

    Focuses on the international industry of merchant shipping to explore strategies used to promote organizational change over the past 20 years. This case study emphasizes the advantages of melding knowledge and action in participatory action. Points out the importance of the design and management of industry-level forums in assuring the success.…

  10. The United States nuclear merchant ship program

    International Nuclear Information System (INIS)

    Maynard, E.V.

    1978-01-01

    The issues of financial protection contemplate appropriate financing to permit construction of the involved vessels. In addition, the licensing process will require a demonstrated ability for financial response in the event of injury to persons or damage to property. Since the thrust in the United States is to use the Price-Anderson framework for Insurance and Indemnity, much attention is devoted to this legislation. The pre-existing regime is related to the distinguishing requirements of the Maritime field with proposals being advanced to more nearly parallel the insurance coverage philosophy of Europe, i.e., to utilize insurance pools for the nuclear risks and utilize the conventional insurance market for non-nuclear risks. Public affairs issues impact heavily on legislation efforts and thusly become significant in developing a program for Financial Protection

  11. The evolution of merchant moral thought in Tokugawa Japan

    Directory of Open Access Journals (Sweden)

    Ryan Langrill

    2012-05-01

    Full Text Available The Tokugawa Era of Japan is known for its domination by the shogunate, or warrior bureaucracy. While samurai capture the popular imagination, the merchant class of this era was changing their cultural narrative as well. The regime, officially Neo-Confucian, considered trade a vulgar and corrupting activity, but among commoners, especially in Osaka, a culture arose celebrating the virtue of commerce. Merchant scholars and commoners assailed the orthodoxy by putting forth alternate interpretations of Confucianism, and later by abandoning the entire Confucian framework. Their primary goal was to explore the nature of virtue and commerce, and justify their own place in the world. As a side effect, the marriage of virtue to commerce allowed a nexus of long-term relationships to arise, based in Osaka.

  12. Collateral Composition, Diversification Risk, and Systemically Important Merchant Banks

    Czech Academy of Sciences Publication Activity Database

    Derviz, Alexis

    2014-01-01

    Roč. 14, Special Issue (2014), s. 23-34 ISSN 1572-3089 R&D Projects: GA ČR GA13-11983S Institutional support: RVO:67985556 Keywords : collateral * systemic risk * merchant bank * CoCo Subject RIV: AH - Economics Impact factor: 1.506, year: 2014 http://library.utia.cas.cz/separaty/2014/E/derviz-0433271.pdf

  13. EUV mask manufacturing readiness in the merchant mask industry

    Science.gov (United States)

    Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

    2017-10-01

    As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for

  14. Internationalization of China's Shanxi Province New Merchants: Implications and Use in Teaching IB

    Science.gov (United States)

    Guo, Juanjuan

    2017-01-01

    The Jin (Jin refers to Shanxi Province) merchants have a very important position in the history of Chinese business. The Jin merchants is a business course that investigates Shanxi businessmen and their business activities. As a local characteristic of the business curriculum of China, this course is taught in a number of universities. Taking the…

  15. 17 CFR 1.14 - Risk assessment recordkeeping requirements for futures commission merchants.

    Science.gov (United States)

    2010-04-01

    ... risk, and other risks created by the futures commission merchant's proprietary and noncustomer clearing... Holding Company Act of 1956; or (3) In the case of a Material Affiliated Person that is subject to the... to any futures commission merchant which holds funds or property of or for futures customers of less...

  16. 43 CFR 41.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... Coverage § 41.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Military and merchant marine educational...

  17. 28 CFR 54.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... Coverage § 54.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Military and merchant marine educational...

  18. 22 CFR 229.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-04-01

    ... Coverage § 229.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Military and merchant marine educational...

  19. 14 CFR 1253.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-01-01

    ... Coverage § 1253.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Military and merchant marine educational...

  20. 6 CFR 17.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-01-01

    ... Coverage § 17.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 6 Domestic Security 1 2010-01-01 2010-01-01 false Military and merchant marine educational...

  1. 29 CFR 36.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Military and merchant marine educational institutions. 36... merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military service of the United States...

  2. 49 CFR 25.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... Coverage § 25.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 49 Transportation 1 2010-10-01 2010-10-01 false Military and merchant marine educational...

  3. 34 CFR 106.13 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Military and merchant marine educational institutions... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 106.13 Military and merchant marine educational institutions. This part does not apply to an educational institution whose primary purpose is the training of...

  4. 10 CFR 5.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Military and merchant marine educational institutions. 5... merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military service of the United States...

  5. 22 CFR 146.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-04-01

    ... § 146.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Military and merchant marine educational...

  6. 45 CFR 86.13 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... Coverage § 86.13 Military and merchant marine educational institutions. This part does not apply to an educational institution whose primary purpose is the training of individuals for a military service of the... 45 Public Welfare 1 2010-10-01 2010-10-01 false Military and merchant marine educational...

  7. 12 CFR 225.172 - What are the holding periods permitted for merchant banking investments?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What are the holding periods permitted for merchant banking investments? 225.172 Section 225.172 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED... (REGULATION Y) Regulations Merchant Banking Investments § 225.172 What are the holding periods permitted for...

  8. 17 CFR 155.3 - Trading standards for futures commission merchants.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Trading standards for futures commission merchants. 155.3 Section 155.3 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION TRADING STANDARDS § 155.3 Trading standards for futures commission merchants. (a) Each futures...

  9. Is the Merchant Power Producer a broken model?

    International Nuclear Information System (INIS)

    Nelson, James; Simshauser, Paul

    2013-01-01

    Deregulated energy markets were founded on the Merchant Power Producer, a stand-alone generator that sold its production to the spot and short-term forward markets, underpinned by long-dated project finance. The initial enthusiasm that existed for investment in existing and new merchant power plant capacity shortly after power system deregulation has progressively dissipated, following an excess entry result. In this article, we demonstrate why this has become a global trend. Using debt-sizing parameters typically used by project banks, we model a benchmark plant, then re-simulate its performance using live energy market price data and find that such financings are no longer feasible in the absence of long-term Power Purchase Agreements. - Highlights: ► We model a hypothetical CCGT plant in QLD under project financing constraints typical of the industry. ► We simulate plant operations with live market data to analyse the results. ► We find that a plant which should represent the industry's long-run marginal cost is not a feasible investment.

  10. Reactor vessel

    NARCIS (Netherlands)

    Makkee, M.; Kapteijn, F.; Moulijn, J.A.

    1999-01-01

    A reactor vessel (1) comprises a reactor body (2) through which channels (3) are provided whose surface comprises longitudinal inwardly directed parts (4) and is provided with a catalyst (6), as well as buffer bodies (8, 12) connected to the channels (3) on both sides of the reactor body (2) and

  11. Containment vessel

    International Nuclear Information System (INIS)

    Zbirohowski-Koscia, K.F.; Roberts, A.C.

    1980-01-01

    A concrete containment vessel for nuclear reactors is disclosed that is spherical and that has prestressing tendons disposed in first, second and third sets, the tendons of each set being all substantially concentric and centred around a respective one of the three orthogonal axes of the sphere; the tendons of the first set being anchored at each end at a first anchor rib running around a circumference of the vessel, the tendons of the second set being anchored at each end at a second anchor rib running around a circumference of the sphere and disposed at 90 0 to the first rib, and the tendons of the third set being anchored some to the first rib and the remainder to the second rib. (author)

  12. Work environment and safety climate in the Swedish merchant fleet.

    Science.gov (United States)

    Forsell, Karl; Eriksson, Helena; Järvholm, Bengt; Lundh, Monica; Andersson, Eva; Nilsson, Ralph

    2017-02-01

    To get knowledge of the work environment for seafarers sailing under the Swedish flag, in terms of safety climate, ergonomical, chemical and psychosocial exposures, and the seafarers self-rated health and work ability. A Web-based questionnaire was sent to all seafarers with a personal e-mail address in the Swedish Maritime Registry (N = 5608). Comparisons were made mainly within the study population, using Student's t test, prevalence odds ratios and logistic regressions with 95% confidence intervals. The response rate was 35% (N = 1972; 10% women, 90% men), with 61% of the respondents working on deck, 31% in the engine room and 7% in the catering/service department (1% not classifiable). Strain on neck, arm or back and heavy lifting were associated with female gender (p = 0.0001) and younger age (below or above 30 years of age, p work problems were noise, risk of an accident and vibrations from the hull of the ship. The safety climate was high in comparison with that in land-based occupations. One-fourth had experienced personal harassment or bullying during last year of service. Noise, risk of accidents, hand/arm and whole-body vibrations and psychosocial factors such as harassment were commonly reported work environment problems among seafarers within the Swedish merchant fleet.

  13. Vessel Operator System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Operator cards are required for any operator of a charter/party boat and or a commercial vessel (including carrier and processor vessels) issued a vessel permit from...

  14. [Sharing and distrusting: street merchants' view of children in street situations].

    Science.gov (United States)

    Sánchez-Suárez, Diana M; Giraldo-Puerta, Alexandra; Giraldo-Pineda, Álvaro; Forero-Pulido, Constanza

    2016-06-01

    Objective To understand the meanings, through the description of experiences that street merchants have of their interactions with children in a street situation in downtown of Medellin in 2013. Methodology Qualitative investigation with ethnographic approach. Observations were made in the zone at different times of the day. Twelve interviews with street merchants were held in their work places. Records were kept in a field journal. Results The street merchants and children in street situations share the same space. Both groups try to survive and their relationship is mediated by the trust-distrust that is established between them. The coexistence generates ambivalent feelings. For the street merchants, children in street situations are the result of abandonment by the family, the state and society. They live in a hard world in which they are exposed to a series of risks that they must face. Conclusion The interaction between street merchants and children in street situations is good to the extent that conflicts are avoided, establishing norms of coexistence. The element that determines this relationship is trust-distrust. In trust, strong affective ties are generated, considering each other family. Distrust generates a preventative attitude.

  15. How to make a graceful exit from the merchant function

    Energy Technology Data Exchange (ETDEWEB)

    Holder, J. [Consumers Gas Co. Ltd., North York, ON (Canada)

    1998-09-01

    The impact that deregulation and convergence has had on local distribution companies (LDCs) was discussed. LDCs are getting out of a whole range of business activities, or are turning some of them into new entities while transferring others to affiliates. At the other end of the spectrum, Consumers Gas, Canada`s largest LDC, has moved from a gas distribution and an oil pipeline company to becoming a total energy provider. The changes at Consumers Gas began with the Halloween agreement which was based on the following four basic principles: (1) better access for Canadian buyers to gas supply, (2) better access for Canadian producers to gas markets, (3) protection for Canadian consumers for reasonable, foreseeable gas requirements, and (4) a commitment to create a competitive natural gas market in Canada. At the same time, several small niche market players have entered the retail market to compete with large producers such as Sunoco and Shell. Ontario also saw the arrival of large marketers such as Enron, and the development of an active direct purchase market. Today, 65 per cent of the volume of natural gas transport is on behalf of direct purchase customers. The next phase of deregulation was also looked at, focusing primarily on the growing problems with the current regulated local distribution companies` gas supply options and the resulting price volatility and uncertainty due to an increase of direct purchase activity. Various possible ways to resolve this problem are explored, including exiting the merchant function, i.e. to change from an obligation to supply gas to an obligation to deliver gas, all the while ensuring that the consumer is protected. Other problems, such as convergence, unbundling and rebundling will also have to be dealt with in the next phase of deregulation.

  16. How to make a graceful exit from the merchant function

    International Nuclear Information System (INIS)

    Holder, J.

    1998-01-01

    The impact that deregulation and convergence has had on local distribution companies (LDCs) was discussed. LDCs are getting out of a whole range of business activities, or are turning some of them into new entities while transferring others to affiliates. At the other end of the spectrum, Consumers Gas, Canada's largest LDC, has moved from a gas distribution and an oil pipeline company to becoming a total energy provider. The changes at Consumers Gas began with the Halloween agreement which was based on the following four basic principles: (1) better access for Canadian buyers to gas supply, (2) better access for Canadian producers to gas markets, (3) protection for Canadian consumers for reasonable, foreseeable gas requirements, and (4) a commitment to create a competitive natural gas market in Canada. At the same time, several small niche market players have entered the retail market to compete with large producers such as Sunoco and Shell. Ontario also saw the arrival of large marketers such as Enron, and the development of an active direct purchase market. Today, 65 per cent of the volume of natural gas transport is on behalf of direct purchase customers. The next phase of deregulation was also looked at, focusing primarily on the growing problems with the current regulated local distribution companies' gas supply options and the resulting price volatility and uncertainty due to an increase of direct purchase activity. Various possible ways to resolve this problem are explored, including exiting the merchant function, i.e. to change from an obligation to supply gas to an obligation to deliver gas, all the while ensuring that the consumer is protected. Other problems, such as convergence, unbundling and rebundling will also have to be dealt with in the next phase of deregulation

  17. How to influence Venetian economic policy : collective petitions of the Netherlandish merchant community in the early seventeenth century

    NARCIS (Netherlands)

    van Gelder, M.

    2009-01-01

    Protectionist legislation traditionally excluded immigrant merchants from Venetian trade, yet by 1600 the commercial balance of power had changed. This article argues that immigrant merchants with strong ties to the northern trading world were able directly to influence Venetian legislation. It does

  18. Leave It to Beaver. Merchants Millpond State Park: An Environmental Education Learning Experience Designed for Grades 4-6.

    Science.gov (United States)

    Williams, Floyd K.

    This learning packet, one in a group of eight, was developed by the Merchants Millpond State Park in North Carolina to teach students in grades 4-6 about the habitat and lifestyle of the beaver. Loose-leaf pages are presented in nine sections that contain: (1) introductions to the North Carolina State Parks System, the Merchants Millpond State…

  19. 12 CFR 1500.6 - What risk management, record keeping and reporting policies are required to make merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What risk management, record keeping and reporting policies are required to make merchant banking investments? 1500.6 Section 1500.6 Banks and Banking DEPARTMENT OF THE TREASURY GENERAL PROVISIONS MERCHANT BANKING INVESTMENTS § 1500.6 What risk...

  20. 78 FR 1217 - Merchant Marine Personnel Advisory Committee; Vacancies

    Science.gov (United States)

    2013-01-08

    ... vessels; one position for a member who represents the viewpoint of shipping companies employed in ship... Ethics Official (DAEO) or his or her designee may release a Confidential Financial Disclosure Report. Applicants can obtain this form by going to the Web site of the Office of Government Ethics ( www.oge.gov...

  1. The Merchant Shipping (Dangerous Goods) Rules 1978 (Statutory Instrument 1543, 25 October 1978)

    International Nuclear Information System (INIS)

    1978-01-01

    These Rules supersede the Merchant Shipping (Dangerous Goods) Rule of 1965 as amended by the Merchant Shipping (Dangerous Goods) (Amendment) Rules of 1968 and 1972. The Rules now define 'dangerous goods' by reference to goods classified as dangerous for carriage by sea as well as any other goods whose properties might be dangerous it they were carried by sea. This classification is based on that of the 1978 Report of the Standing Advisory Committee on the Carriage of Dangerous Goods of the Department of Trade, and the 1977 Edition of the International Maritime Dangerous Goods Code published by the Intergovernmental Maritime consultative Organisation. (NEA) [fr

  2. Utilization of uranium cost/benefit study for nuclear powered merchant ships. Special study

    International Nuclear Information System (INIS)

    Smith, E.R.

    1977-05-01

    This study presents a cost/benefit analysis for the utilization of uranium in merchant ships versus the use of uranium for the generation of electricity in central power stations. The study concludes that an alternative naval fuel to oil must be developed for the merchant marine to reduce U.S. dependency upon foreign supplies of a critical fuel. The study further indicates that use of uranium for ship propulsion results in transport of large quantities of needed import/exports while the residual oil saved will generate the same quantity of electricity in a central power station as the uranium used for ship propulsion

  3. 75 FR 70152 - Implementation of Conflicts of Interest Policies and Procedures by Futures Commission Merchants...

    Science.gov (United States)

    2010-11-17

    ... evaluation or compensation of a research analyst. (iii) Except as provided in paragraph (c)(1)(iv) of this... Research Analyst Compensation. A futures commission merchant or introducing broker may not consider as a factor in reviewing or approving a research analyst's compensation his or her contributions to the...

  4. Understanding "The Merchant of Venice": A Student Casebook to Issues, Sources, and Historical Documents.

    Science.gov (United States)

    Halio, Jay L.

    "The Merchant of Venice," even in its own time, was considered William Shakespeare's most controversial play. Now, one of the most popular read and performed works, the play raises even more important issues for today, particularly anti-Semitism and the treatment of Jews. The analysis of the play in this casebook helps students interpret…

  5. Prejudice, Pedagogy, and the Play: A Study of "The Merchant of Venice."

    Science.gov (United States)

    Eiferman, Sharon

    There is little critical agreement on the meaning of Shakespeare's "The Merchant of Venice." One must confront the mindset of the play that systematically dehumanizes, stereotypes, excoriates, and seeks the extermination of one group on the grounds that their existence is repugnant to the controlling majority. Such a mindset is the…

  6. 78 FR 68505 - Enhancing Protections Afforded Customers and Customer Funds Held by Futures Commission Merchants...

    Science.gov (United States)

    2013-11-14

    ... protection of customers--and the safeguarding of money, securities or other property deposited by customers... Parts 1, 3, 22, et al. Enhancing Protections Afforded Customers and Customer Funds Held by Futures... Customers and Customer Funds Held by Futures Commission Merchants and Derivatives Clearing Organizations...

  7. 77 FR 67865 - Enhancing Protections Afforded Customers and Customer Funds Held by Futures Commission Merchants...

    Science.gov (United States)

    2012-11-14

    ... The protection of customers--and the safeguarding of money, securities or other property deposited by... Parts 1, 3, 22 et al. Enhancing Protections Afforded Customers and Customer Funds Held by Futures... Customers and Customer Funds Held by Futures Commission Merchants and Derivatives Clearing Organizations...

  8. Merchantable sawlog and bole-length equations for the Northeastern United States

    Science.gov (United States)

    Daniel A. Yaussy; Martin E. Dale; Martin E. Dale

    1991-01-01

    A modified Richards growth model is used to develop species-specific coefficients for equations estimating the merchantable sawlog and bole lengths of trees from 25 species groups common to the Northeastern United States. These regression coefficients have been incorporated into the growth-and-yield simulation software, NE-TWIGS.

  9. 40 CFR 5.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... educational institutions. 5.210 Section 5.210 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... FINANCIAL ASSISTANCE Coverage § 5.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals...

  10. 44 CFR 19.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Military and merchant marine educational institutions. 19.210 Section 19.210 Emergency Management and Assistance FEDERAL EMERGENCY... marine educational institutions. These Title IX regulations do not apply to an educational institution...

  11. 45 CFR 2555.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... educational institutions. These Title IX regulations do not apply to an educational institution whose primary... 45 Public Welfare 4 2010-10-01 2010-10-01 false Military and merchant marine educational institutions. 2555.210 Section 2555.210 Public Welfare Regulations Relating to Public Welfare (Continued...

  12. 7 CFR 15a.13 - Military and merchant marine educational institution.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Military and merchant marine educational institution. 15a.13 Section 15a.13 Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR... marine educational institution. This part does not apply to an educational institution whose primary...

  13. 38 CFR 23.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... marine educational institutions. 23.210 Section 23.210 Pensions, Bonuses, and Veterans' Relief DEPARTMENT... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 23.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is...

  14. 31 CFR 28.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... educational institutions. 28.210 Section 28.210 Money and Finance: Treasury Office of the Secretary of the... FINANCIAL ASSISTANCE Coverage § 28.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals...

  15. 15 CFR 8a.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-01-01

    ... educational institutions. 8a.210 Section 8a.210 Commerce and Foreign Trade Office of the Secretary of Commerce... Coverage § 8a.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a military...

  16. 45 CFR 618.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-10-01

    ... institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is... 45 Public Welfare 3 2010-10-01 2010-10-01 false Military and merchant marine educational institutions. 618.210 Section 618.210 Public Welfare Regulations Relating to Public Welfare (Continued...

  17. 41 CFR 101-4.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... marine educational institutions. 101-4.210 Section 101-4.210 Public Contracts and Property Management... Coverage § 101-4.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of individuals for a...

  18. 13 CFR 113.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-01-01

    ... educational institutions. 113.210 Section 113.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... Financial Assistance Coverage § 113.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is the training of...

  19. 24 CFR 3.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-04-01

    ... educational institutions. 3.210 Section 3.210 Housing and Urban Development Office of the Secretary... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 3.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is...

  20. 32 CFR 196.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... educational institutions. These Title IX regulations do not apply to an educational institution whose primary... 32 National Defense 2 2010-07-01 2010-07-01 false Military and merchant marine educational institutions. 196.210 Section 196.210 National Defense Department of Defense (Continued) OFFICE OF THE...

  1. 18 CFR 1317.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-04-01

    ... marine educational institutions. 1317.210 Section 1317.210 Conservation of Power and Water Resources... RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 1317.210 Military and merchant marine educational institutions. These Title IX regulations do not apply to an educational institution whose primary purpose is...

  2. 36 CFR 1211.210 - Military and merchant marine educational institutions.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Military and merchant marine educational institutions. 1211.210 Section 1211.210 Parks, Forests, and Public Property NATIONAL ARCHIVES AND... educational institutions. These Title IX regulations do not apply to an educational institution whose primary...

  3. Evaluation of total aboveground biomass and total merchantable biomass in Missouri

    Science.gov (United States)

    Michael E. Goerndt; David R. Larsen; Charles D. Keating

    2014-01-01

    In recent years, the state of Missouri has been converting to biomass weight rather than volume as the standard measurement of wood for buying and selling sawtimber. Therefore, there is a need to identify accurate and precise methods of estimating whole tree biomass and merchantable biomass of harvested trees as well as total standing biomass of live timber for...

  4. 17 CFR 1.12 - Maintenance of minimum financial requirements by futures commission merchants and introducing...

    Science.gov (United States)

    2010-04-01

    ... financial requirements by futures commission merchants and introducing brokers. 1.12 Section 1.12 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Minimum Financial and Related Reporting Requirements § 1.12 Maintenance of minimum financial...

  5. 17 CFR 1.10 - Financial reports of futures commission merchants and introducing brokers.

    Science.gov (United States)

    2010-04-01

    ... FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Minimum Financial and Related Reporting Requirements § 1.10 Financial reports of futures commission merchants and introducing...-regulatory organization and conforms to minimum financial standards and related reporting requirements set by...

  6. Negotiating Trade: Merchant Manuals and Cross-Cultural Exchange in the Medieval Mediterranean

    Science.gov (United States)

    Stanley, Joseph F.

    2018-01-01

    This essay explores Italian mercantile perceptions of the non-western Mediterranean world during the late Middle Ages. In particular, it analyzes the corpus of merchant manuals known as "pratiche della mercatura" and argues that the intercultural and cross-confessional material included in these handbooks were vital components that…

  7. Developing and financing merchant power plants in the U.S

    International Nuclear Information System (INIS)

    Ryan, M.J.

    1998-01-01

    Limited recourse financing for merchant plants in some areas of the world such as Latin America has become almost commonplace in the recent past. Limited recourse project financing for merchant plants in the US, once almost unthinkable, has already been achieved with the frontier-breaking Calpine Pasadena project. While long-term power purchase agreements have historically provided comfort to lenders and developers alike, they are increasingly becoming a thing of the past as utilities are reluctant to lock themselves into a fixed price, which may turn out to exceed the prices available in the open market. So, it seems that the trends toward merchant plants in Latin America will soon take hold in the domestic market. With the market for limited recourse project financing still in the embryonic stage, and the strong likelihood that long-term power purchase agreements will not be available, it is clear that successful domestic projects will have to be well conceived, properly structured and capitalized to secure debt and equity funding commitments. This paper will focus on opportunities for developing merchant plants, the major risks present to developers and investors and the most appropriate strategies for structuring finance for a project

  8. 31 CFR 103.123 - Customer identification programs for futures commission merchants and introducing brokers.

    Science.gov (United States)

    2010-07-01

    ... TRANSACTIONS Anti-Money Laundering Programs Anti-Money Laundering Programs § 103.123 Customer identification... each futures commission merchant's and introducing broker's anti-money laundering compliance program... money laundering activities, Federal law requires all financial institutions to obtain, verify, and...

  9. Improvement to reactor vessel

    International Nuclear Information System (INIS)

    1974-01-01

    The vessel described includes a prestressed concrete vessel containing a chamber and a removable cover closing this chamber. The cover is in concrete and is kept in its closed position by main and auxiliary retainers, comprising fittings integral with the concrete of the vessel. The auxiliary retainers pass through the concrete of the cover. This improvement may be applied to BWR, PWR and LMFBR type reactor vessel [fr

  10. ALICE HMPID Radiator Vessel

    CERN Multimedia

    2003-01-01

    View of the radiator vessels of the ALICE/HMPID mounted on the support frame. Each HMPID module is equipped with 3 indipendent radiator vessels made out of neoceram and fused silica (quartz) windows glued together. The spacers inside the vessel are needed to stand the hydrostatic pressure. http://alice-hmpid.web.cern.ch/alice-hmpid

  11. The Merchant and the Message: Hard Conditions, Soft Power and Empty Vessels as Regards Gender in EU External Relations

    NARCIS (Netherlands)

    Vleuten, J.M. van der

    2017-01-01

    The EU claims to be a normative power which in its external relations acts as a teacher on gender issues. However, in spite of its commitments it does not yet systematically practice what it preaches. Also, the EU does not define but transfers the ‘normal’ as regards gender equality, based on

  12. Kiteships, sailing vessels pulled and powered with a kite

    Energy Technology Data Exchange (ETDEWEB)

    Winter, F. de; Swenson, R.B.; Culp, D.

    1999-07-01

    Current windpower technology and future petroleum supply scenarios make it likely that it will become desirable to consider sailing vessels again for the merchant marine. For the wind-powered propulsion it seems possible to use tethered kites, instead of the traditional combination of masts and booms supporting a system of sails. This may be both safer and more cost-effective. The authors are on boat No. 2 in an R and D program aimed at this large scale application, and the present paper represents a progress report. Boat No. 1 was used to achieve speed and power, achieving a speed of 33 knots (over 60 km per hour), and sailing speeds at times of twice the wind velocity. Boat No. 2 will not be used for speed, but for the development of kite deployment and retrieval techniques, with kites of up to 300 sq ft (28 sq m) in surface area.

  13. The Valencian Merchant Joan Augier’s Accounts Book: Year 1604

    Directory of Open Access Journals (Sweden)

    María Teresa PÉREZ VILLALBA

    2017-11-01

    Full Text Available Merchants are essential figures in the economy of the modern centuries, and getting to know their activity allows for a better understanding of their environment. The accounts book therefore represents a valuable and also a scarce type of document, at least in xvi century Spain. The issue that made the following work possible spans years 1597-1613, and belonged to the Valencian merchant Joan Augier. The analysis of year 1604 reveals diversified economic and financial activity, among which we highlight import and export with Marseilles and Genoa, and tax renting or bond purchasing. The pages show a complex network of interprofessional relationships together with information concerning a range of items and service prices, thereby permitting an approach to the commercial, fiscal and financial life in Valencia at that time.

  14. Telemedical Maritime Assistance Service (TMAS) to Swedish merchant and passengers ships 1997-2012

    DEFF Research Database (Denmark)

    Westlund, Karin; Attvall, Stig; Nilsson, Ralph

    2016-01-01

    BACKGROUND: Telemedical Maritime Assistance Service (TMAS) for seafarers and traveling passengers is important and can be crucial for the optimal medical treatment on board ships. The aim of this study was to analyse and to compare the data from consultations and evacuations from merchant ships...... Classification for Primary Care (ICPC-2). The distribution of symptoms, accidents and diseases, treatments/actions taken, evacuations and the communication forms were analysed. RESULTS: One thousand ninety-five contacts for seafarers from merchant ships and 651 passenger patients from Swedish ferries were...... analysed. While the evacuations for the seafarers gradually decreased over the years from 18% in 1997 to 14% in 2007, still 39.5% of the passenger patient contacts were evacuated mainly by helicopters and 70 patients were picked up by an ambulance on the quay. Accidents were 20% for seafarers and 25...

  15. “Getting By” at the Urban Periphery: Everyday Struggles of Informal Merchants in Tunisia

    Directory of Open Access Journals (Sweden)

    Johannes Frische

    2015-11-01

    Full Text Available The article examines the significance of informal economic practices, e.g. street vending and informal commerce, for young merchants from Ettadhamen, a neighborhood situated in the northwestern periphery of the Greater Tunis area. It further addresses cross-border trade in the Tunisian-Libyan and Tunisian-Algerian border regions in which some of these merchants are indirectly involved. Peripheralization therefore does not imply complete socio-spatial exclusion. Peripheries rather offer important, albeit limited possibilities, to acquire resources through practices that are situated in the interstices between legality and illegality. As these possibilities often avoid state regulation and control, the article also addresses the ambivalent nature of the state-society relations that shapes everyday encounters between inhabitants and state agents, especially the police.

  16. Merchants and marvels commerce, science, and art in early modern Europe

    CERN Document Server

    Smith, Pamela

    2013-01-01

    The beginning of global commerce in the early modern period had an enormous impact on European culture, changing the very way people perceived the world around them. Merchants and Marvels assembles essays by leading scholars of cultural history, art history, and the history of science and technology to show how ideas about the representation of nature, in both art and science, underwent a profound transformation between the age of the Renaissance and the early 1700s.

  17. Merchant interconnector projects by generators in the EU: Profitability and allocation of capacity

    International Nuclear Information System (INIS)

    Koten, Silvester van

    2012-01-01

    When building a cross-border transmission line (a so-called interconnector) as a for-profit (merchant) project, where the regulator has required that capacity allocation be done non-discriminatorily by explicit auction, the identity of the investor can affect the profitability of the interconnector project and, once operational, the resulting allocation of its capacity. Specifically, when the investor is a generator (hereafter the integrated generator) who also can use the interconnector to export its electricity to a distant location, then, once operational, the integrated generator will bid more aggressively in the allocation auctions to increase the auction revenue and thus its profits. As a result, the integrated generator is more likely to win the auction and the capacity is sold for a higher price. This lowers the allocative efficiency of the auction, but it increases the expected ex-ante profitability of the merchant interconnector project. Unaffiliated, independent generators, however, are less likely to win the auction and, in any case, pay a higher price, which dramatically lowers their revenues from exporting electricity over this interconnector. - Highlights: ► A merchant interconnector owned by an electricity generator needs special attention of regulators. ► Even when allocation of the capacity is done by auctions, the generator will make a large profit. ► The generator will also decrease the allocation of capacity to competitors by bidding aggressively.

  18. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  19. Small Vessel Security Strategy

    National Research Council Canada - National Science Library

    2008-01-01

    ...), narcotics, aliens, and other contraband, and other criminals. Small vessels have also been successfully employed overseas by terrorists to deliver Waterborne Improvised Explosive Devices (WBIEDs...

  20. Maury Journals - German Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — German vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  1. Nuclear reactor pressure vessel

    International Nuclear Information System (INIS)

    McDonald, B.N.

    1976-01-01

    In nuclear power reactor systems which have a reactor core inside a pressure vessel, the feedwater inlet pipe and steam discharge nozzle usually require separate pressure vessel penetrations. This requirement involves a great deal of expensive high quality special machining, welding and weld joint testing. The invention overcomes most of these problems by nestling the feedwater inlet pipe inside the steam discharge nozzle. At the same time the individual heat exchanger modules are supported from the pressure vessel at the same location as the nested feedwater inlet pipe and steam discharge nozzle combination, thus eliminating the need to accomodate troublesome differential thermal expansion problems through special structures within the pressure vessel

  2. PRESSURE-RESISTANT VESSEL

    NARCIS (Netherlands)

    Beukers, A.; De Jong, T.

    1997-01-01

    Abstract of WO 9717570 (A1) The invention is directed to a wheel-shaped pressure-resistant vessel for gaseous, liquid or liquefied material having a substantially rigid shape, said vessel comprising a substantially continuous shell of a fiber-reinforced resin having a central opening, an inner

  3. Containment vessel drain system

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Scott G.

    2018-01-30

    A system for draining a containment vessel may include a drain inlet located in a lower portion of the containment vessel. The containment vessel may be at least partially filled with a liquid, and the drain inlet may be located below a surface of the liquid. The system may further comprise an inlet located in an upper portion of the containment vessel. The inlet may be configured to insert pressurized gas into the containment vessel to form a pressurized region above the surface of the liquid, and the pressurized region may operate to apply a surface pressure that forces the liquid into the drain inlet. Additionally, a fluid separation device may be operatively connected to the drain inlet. The fluid separation device may be configured to separate the liquid from the pressurized gas that enters the drain inlet after the surface of the liquid falls below the drain inlet.

  4. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  5. 12 CFR 1500.2 - What are the limitations on managing or operating a portfolio company held as a merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false What are the limitations on managing or operating a portfolio company held as a merchant banking investment? 1500.2 Section 1500.2 Banks and Banking DEPARTMENT OF THE TREASURY GENERAL PROVISIONS MERCHANT BANKING INVESTMENTS § 1500.2 What are the limitations...

  6. 12 CFR 1500.7 - How do the statutory cross marketing and sections 23A and B limitations apply to merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false How do the statutory cross marketing and sections 23A and B limitations apply to merchant banking investments? 1500.7 Section 1500.7 Banks and Banking DEPARTMENT OF THE TREASURY GENERAL PROVISIONS MERCHANT BANKING INVESTMENTS § 1500.7 How do the...

  7. Association between nationality and occupational injury risk on Danish non-passenger merchant ships

    DEFF Research Database (Denmark)

    Adam, B.

    2013-01-01

    BACKGROUND: Maritime occupational accidents can be determined by several factors, among which human characteristics play a crucial role. Worker's safety behaviour depends on individual physical and mental characteristics as well as on his/her social and cultural background. The aim of this study...... is to investigate the frequency of workplace injuries in the Danish merchant fleet in the period 2010-2012, and to characterise its nationality dependence. MATERIALS AND METHODS: Occupational injuries data reported from ships registered in the Danish International Ship Register to the Danish Maritime Authority were...

  8. Reconstructing Merchant Multilingualism : Lexical Studies of Early English East India Company Correspondence

    OpenAIRE

    Kaislaniemi, Samuli

    2017-01-01

    This dissertation investigates the multilingual practices of 17th-century English East India Company merchants, as revealed by the vocabulary they used in the texts they produced while stationed in the East Indies. The English East India Company (EIC) was founded in 1600. At first it was a moderately successful trading company, but in the 18th and 19th centuries the EIC rose to dominate the European trade in Indian goods, and then in Chinese tea and porcelain. During this period, it also ...

  9. Cheboygan Vessel Base

    Data.gov (United States)

    Federal Laboratory Consortium — Cheboygan Vessel Base (CVB), located in Cheboygan, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). CVB was established by congressional...

  10. Coastal Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch (landed catch) and effort for fishing trips made by vessels that have been issued a Federal permit for the Gulf of Mexico reef fish,...

  11. Vessel Sewage Discharges

    Science.gov (United States)

    Vessel sewage discharges are regulated under Section 312 of the Clean Water Act, which is jointly implemented by the EPA and Coast Guard. This homepage links to information on marine sanitation devices and no discharge zones.

  12. High Performance Marine Vessels

    CERN Document Server

    Yun, Liang

    2012-01-01

    High Performance Marine Vessels (HPMVs) range from the Fast Ferries to the latest high speed Navy Craft, including competition power boats and hydroplanes, hydrofoils, hovercraft, catamarans and other multi-hull craft. High Performance Marine Vessels covers the main concepts of HPMVs and discusses historical background, design features, services that have been successful and not so successful, and some sample data of the range of HPMVs to date. Included is a comparison of all HPMVs craft and the differences between them and descriptions of performance (hydrodynamics and aerodynamics). Readers will find a comprehensive overview of the design, development and building of HPMVs. In summary, this book: Focuses on technology at the aero-marine interface Covers the full range of high performance marine vessel concepts Explains the historical development of various HPMVs Discusses ferries, racing and pleasure craft, as well as utility and military missions High Performance Marine Vessels is an ideal book for student...

  13. 2013 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  14. Reactor pressure vessel support

    International Nuclear Information System (INIS)

    Butti, J.P.

    1978-01-01

    A link and pin support system provides the primary vertical and lateral support for a nuclear reactor pressure vessel without restricting thermally induced radial and vertical expansion and contraction

  15. 2013 Cargo Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  16. Maury Journals - US Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — U.S. vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  17. 2013 Tanker Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  18. 2013 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  19. Ocean Station Vessel

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean Station Vessels (OSV) or Weather Ships captured atmospheric conditions while being stationed continuously in a single location. While While most of the...

  20. 2011 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  1. 2011 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  2. 2011 Cargo Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  3. Pressurized Vessel Slurry Pumping

    International Nuclear Information System (INIS)

    Pound, C.R.

    2001-01-01

    This report summarizes testing of an alternate ''pressurized vessel slurry pumping'' apparatus. The principle is similar to rural domestic water systems and ''acid eggs'' used in chemical laboratories in that material is extruded by displacement with compressed air

  4. 2013 Passenger Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  5. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  6. FFTF and CRBRP reactor vessels

    International Nuclear Information System (INIS)

    Morgan, R.E.

    1977-01-01

    The Fast Flux Test Facility (FFTF) reactor vessel and the Clinch River Breeder Reactor Plant (CRBRP) reactor vessel each serve to enclose a fast spectrum reactor core, contain the sodium coolant, and provide support and positioning for the closure head and internal structure. Each vessel is located in its reactor cavity and is protected by a guard vessel which would ensure continued decay heat removal capability should a major system leak develop. Although the two plants have significantly different thermal power ratings, 400 megawatts for FFTF and 975 megawatts for CRBRP, the two reactor vessels are comparable in size, the CRBRP vessel being approximately 28% longer than the FFTF vessel. The FFTF vessel diameter was controlled by the space required for the three individual In-Vessel Handling Machines and Instrument Trees. Utilization of the triple rotating plug scheme for CRBRP refueling enables packaging of the larger CRBRP core in a vessel the same diameter as the FFTF vessel

  7. Pressure vessel, in particular reactor pressure vessel

    International Nuclear Information System (INIS)

    1976-01-01

    The task to design the pre-stressing facility for a pressure vessel, especially for nuclear reactors, wiht pre-stressed jacket and pre-stressing facility, the latter one showing circumferential steel tendons supported polygonally on the outer side of the jacket by means of supporting shoes, in such a way that simply defined tensions can be generated and re-tensioning of the tendons can be carried out easily is solved according to the invention by keeping the circumference of the steel tendons fixed and by designing the supporting shoes as stressing shoes. The defined tensions are applied through the stressing shoes. (ORU) [de

  8. Social Practices and Strategizing: a Study of Produce Merchants in the Vila Rubim Market

    Directory of Open Access Journals (Sweden)

    Alfredo Rodrigues Leite da Silva

    2011-01-01

    Full Text Available The aim of this article is to understand the relationship between the meanings of social practices and strategy creation used by the produce merchants in Vila Rubim, Vitória, ES, from 1970 to the present time. To provide empirical evidence of the conceptual framework that was developed, we conducted a case study. The data gathered from the documents and interviews were treated using discourse analysis, and those obtained from observations were treated using content analysis. The possibility and the act of approaching the neighboring merchant’s customer is the link that joins the homonymous strategy and tactic, but the process in each of them has different implications (strengthening or transgressing the established order and develops in different and dynamic ways. Thus, the denomination of strategies and practices is dynamic, relational and temporary because the focus is on the process that permeates each strategy and its articulations in the practices and meanings in each flow. In their socio-historic process, the produce merchants in the VR Market articulate various flows. Among them, the empirical investigation identified fourteen flows, nine as strategies and five as tactics, according to the social references assumed in the analysis.

  9. 78 FR 5268 - Allocation of Capacity on New Merchant Transmission Projects and New Cost-Based, Participant...

    Science.gov (United States)

    2013-01-25

    ... that enables developers of merchant transmission projects to meet the financial challenges unique to... AGENCY: Federal Energy Regulatory Commission, Energy. ACTION: Final Policy Statement. SUMMARY: The Commission issues this final policy statement to clarify and refine its policies governing the allocation of...

  10. Alexander Claver, Dutch Commerce and Chinese Merchants in Java. Colonial Relationships in Trade and Finance, 1800-1942

    Directory of Open Access Journals (Sweden)

    Kwee Hui Kian

    2015-09-01

    Full Text Available Alexander Claver, Dutch Commerce and Chinese Merchants in Java. Colonial Relationships in Trade and Finance, 1800-1942 (Verhandelingen van het Koninklijk Instituut voor Taal-, Land- en Volkenkunde 291; Leiden, Boston: Brill, 2014, xxiv + 442 pp., ISBN 978 90 04 25657 6.

  11. 17 CFR 270.17f-6 - Custody of investment company assets with Futures Commission Merchants and Commodity Clearing...

    Science.gov (United States)

    2010-04-01

    ... transactions in Exchange-Traded Futures Contracts and Commodity Options, Provided that: (1) The manner in which... Contracts and Commodity Options means commodity futures contracts, options on commodity futures contracts... assets with Futures Commission Merchants and Commodity Clearing Organizations. 270.17f-6 Section 270.17f...

  12. "I Could Teach You How to Choose Right": Using Holocaust Memoir to Teach Shakespeare's "The Merchant of Venice"

    Science.gov (United States)

    Whaley, Annemarie Koning

    2011-01-01

    The article examines the problems of teaching William Shakespeare's "The Merchant of Venice" after the Holocaust, arguing that even though the play is anti-Semitic, it can become a valuable teaching tool when placed in the context of the Holocaust memoirs "Dry Tears" by Nechama Tec and "The Nazi Officer's Wife" by…

  13. Problems in the Construction of Gender and Professional Identities for Women in a United Kingdom Merchant Navy Training School

    Science.gov (United States)

    Walker, Caroline; Peart, David; Gleaves, Alan

    2003-01-01

    The United Kingdom Merchant Navy has a very poor record on access and training for females in terms of marine careers across all levels. Furthermore, it is a world where equity and equality are often simply overlooked, partly because the difficult and harsh realities of "normal" working conditions effectively marginalise both women and…

  14. 12 CFR 225.175 - What risk management, record keeping and reporting policies are required to make merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What risk management, record keeping and reporting policies are required to make merchant banking investments? 225.175 Section 225.175 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING...

  15. Estimation of merchantable bole volume and biomass above sawlog top in the National Forest inventory of the United States

    Science.gov (United States)

    Grant M. Domke; Christopher M. Oswalt; Christopher W. Woodall; Jeffery A. Turner

    2013-01-01

    Emerging markets for small-diameter roundwood along with a renewed interest in forest biomass for energy have created a need for estimates of merchantable biomass above the minimum sawlog top diameter for timber species in the national forest inventory of the United States. The Forest Inventory and Analysis (FIA) program of the USDA Forest Service recently adopted the...

  16. Reactor pressure vessel materials

    International Nuclear Information System (INIS)

    Suzuki, K.

    1998-01-01

    As a result of the popularity of the Agencies report 'Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels' of 1975, it was decided that another report on this broad subject would be of use. In this report, background and contemporary views on specially identified areas of the subject are considered as self-contained chapters, written by experts. Chapter 3 offers a detailed treatment of the selection criteria and properties of reactor pressure vessel materials. The main attention is directed towards steel and ingot making and the subsequent material processing

  17. Sapphire tube pressure vessel

    Science.gov (United States)

    Outwater, John O.

    2000-01-01

    A pressure vessel is provided for observing corrosive fluids at high temperatures and pressures. A transparent Teflon bag contains the corrosive fluid and provides an inert barrier. The Teflon bag is placed within a sapphire tube, which forms a pressure boundary. The tube is received within a pipe including a viewing window. The combination of the Teflon bag, sapphire tube and pipe provides a strong and inert pressure vessel. In an alternative embodiment, tie rods connect together compression fittings at opposite ends of the sapphire tube.

  18. Development of merchantable volume equations for natural brutian pine and black pine stands in Eğirdir District

    Directory of Open Access Journals (Sweden)

    Ramazan Özçelik

    2016-01-01

    Full Text Available Determination of stem standing volume is very useful for both sustainable management of timber resources and practical purposes in forestry. Brutian pine (Pinus brutia Ten. and black pine (Pinus nigra Arnold. are important raw material of forest products industry of Turkey. With ever changing market conditions, there is a need to accurately estimate tree volumes utilizing multiple upper stem merchantability limits. This is not currently possible with the existing total stem volume tables for these three species. Nowadays, taper equations are the best way to estimate volume for saw timber and biomass purposes. In this study, variable exponent taper equations evaluated and fitted to data come from 253 destructively sampled trees which were collected in natural brutian pine and black pine stands in Eğirdir district. For this aim, the taper equations of Lee et al. (2003, Kozak (2004, and Sharma and Zhang (2004 were used. A second-order continuous-time autoregressive error structure was used to correct the inherent autocorrelation in the hierarchical data. The proposed models generally performed better for Merchantable tree volume. Results show that the Kozak (2004 taper equation was superior to the other equations in predicting diameter and merchantable height, while The Sharma and Zhang (2004 taper model provided the best predictions for merchantable volume than the other models. The one of the important results of this study, the importance of checking fit statistics of taper equations for both diameters and volume estimations.As a results, Sharma and Zhang (2004 taper model recommended for estimating diameter at a specific height, height to a specific diameter along the stem, and merchantable volume for brutian pine and black pine stands in Eğirdir analyzed

  19. The reactor vessel steels

    International Nuclear Information System (INIS)

    Bilous, W.; Hajewska, E.; Szteke, W.; Przyborska, M.; Wasiak, J.; Wieczorkowski, M.

    2005-01-01

    In the paper the fundamental steels using in the construction of pressure vessel water reactor are discussed. The properties of these steels as well as the influence of neutron irradiation on its degradation in the time of exploitation are also done. (authors)

  20. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  1. Reactor vessel stud tensioner

    International Nuclear Information System (INIS)

    Malandra, L.J.; Beer, R.W.; Salton, R.B.; Spiegelman, S.R.; Cognevich, M.L.

    1982-01-01

    A quick-acting stud tensioner, for facilitating the loosening or tightening of a stud nut on a reactor vessel stud, has gripper jaws which when the tensioner is lowered into engagement with the upper end of the stud are moved inwards to grip the upper end and which when the tensioner is lifted move outward to release the upper end. (author)

  2. Nuclear reactor vessels

    International Nuclear Information System (INIS)

    Sato, Yoshimi; Fukuda, Yoshio.

    1987-01-01

    Purpose: To improve the strength and reliability by moderating thermal stresses produced to the furnace walls of a reactor vessel by the thermal shocks upon reactor shutdown and tripping and reducing the generation of developing thermal ratchet strains produced upon repeating thermal shocks. Constitution: Upon occurrence of reactor shutdown or tripping, the temperature is detected and the pressure of the cover gas is controlled such that the axial temperature slope is decreased to displace the liquid surface in an annular vessel. Then, for attaining the stress reducing temperature, control is so conducted that the temperature of the lower portion is not higher than the upper portion in the axial temperature distribution of the reactor vessel. By controlling the pressure of the cover gas in the annular vessel in this way, the liquid level can be raised to a cover gas portion remaining at a high temperature state. Further, the temperature of the furnace wall can always be decreased to a temperature of the high temperature plenum thereby enabling to moderate the thermal stresses. (Yoshihara, H.)

  3. Network of endocardial vessels.

    Science.gov (United States)

    Lee, Byung-Cheon; Kim, Hong Bae; Sung, Baeckkyoung; Kim, Ki Woo; Sohn, Jamin; Son, Boram; Chang, Byung-Joon; Soh, Kwang-Sup

    2011-01-01

    Although there have been reports on threadlike structures inside the heart, they have received little attention. We aimed to develop a method for observing such structures and to reveal their ultrastructures. An in situ staining method, which uses a series of procedures of 0.2-0.4% trypan blue spraying and washing, was applied to observe threadlike structures on the surfaces of endocardia. The threadlike structures were isolated and observed by using confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM). Networks of endocardial vessels (20 μm in thickness) with expansions (40-100 μm in diameter) were visualized; they were movable on the endocardium of the bovine atrium and ventricle. CLSM showed that (1) rod-shaped nuclei were aligned along the longitudinal direction of the endocardial vessel and (2) there were many cells inside the expansion. TEM on the endocardial vessel revealed that (1) there existed multiple lumens (1-7 μm in diameter) and (2) the extracellular matrices mostly consisted of collagen fibers, which were aligned along the longitudinal direction of the endocardial vessel or were locally organized in reticular structures. We investigated the endocardial circulatory system in bovine cardiac chambers and its ultrastructures, such as nucleic distributions, microlumens, and collagenous extracellular matrices. Copyright © 2011 S. Karger AG, Basel.

  4. Pressure vessel integrity 1991

    International Nuclear Information System (INIS)

    Bhandari, S.; Doney, R.O.; McDonald, M.S.; Jones, D.P.; Wilson, W.K.; Pennell, W.E.

    1991-01-01

    This volume contains papers relating to the structural integrity assessment of pressure vessels and piping, with special emphasis on nuclear industry applications. The papers were prepared for technical sessions developed under the sponsorship of the ASME Pressure Vessels and Piping Division Committees for Codes and Standards, Computer Technology, Design and Analysis, and Materials Fabrication. They were presented at the 1991 Pressure Vessels and Piping Division Conference in San Diego, California, June 23-27. The primary objective of the sponsoring organization is to provide a forum for the dissemination and discussion of information on development and application of technology for the structural integrity assessment of pressure vessels and piping. This publication includes contributions from authors from Australia, France, Japan, Sweden, Switzerland, the United Kingdom, and the United States. The papers here are organized in six sections, each with a particular emphasis as indicated in the following section titles: Fracture Technology Status and Application Experience; Crack Initiation, Propagation and Arrest; Ductile Tearing; Constraint, Stress State, and Local-Brittle-Zones Effects; Computational Techniques for Fracture and Corrosion Fatigue; and Codes and Standards for Fatigue, Fracture and Erosion/Corrosion

  5. PDX vacuum vessel stress analysis

    International Nuclear Information System (INIS)

    Nikodem, Z.D.

    1975-01-01

    A stress analysis of PDX vacuum vessel is described and the summary of results is presented. The vacuum vessel is treated as a toroidal shell of revolution subjected to an internal vacuum. The critical buckling pressure is calculated. The effects of the geometrical discontinuity at the juncture of toroidal shell head and cylindrical outside wall, and the concavity of the cylindrical wall are examined. An effect of the poloidal field coil supports and the vessel outside supports on the stress distribution in the vacuum vessel is determined. A method evaluating the influence of circular ports in the vessel wall on the stress level in the vessel is outlined

  6. The house of Kwee Sik Poo An Indonesian-Chinese merchant from Pasuruan

    Directory of Open Access Journals (Sweden)

    Kwee Hong Sien

    2017-04-01

    Full Text Available The Kwee family is an old Indonesian-Chinese family from Pasuruan, in East Java, and one of a few merchant families of either Chinese or Arab ethnic origin which led successful lives in this small town in the nineteenth century. From their Chinese ancestral village, Liu Chuan in Fujian province, China, a Kwee ancestor travelled to Southeast Asia and settled in Pasuruan, probably in the eighteen century. As with many families who held important positions in the ethnic Chinese community, it also owned large homes, mostly in a mixed architectural style, called “eclecticism” and later in what was known as “the Indies-empire style”. The early family history is still clouded in mystery, as not much concrete information has survived. Its descendants worked hard and prospered and dealt among economic undertakings such as sugar production, opium sales, buying and selling of property and land as well as running pawnshops.

  7. Merchant Guilds and Courts between Tuscany and Catalonia around 14th century

    Directory of Open Access Journals (Sweden)

    Maria Elisa Soldani

    2016-04-01

    Full Text Available During the late Middle Ages, the development of mercantile institutions, as well as the prominent social and political action of the merchants settled in the major urban trading centers, were common features of both Italian and Catalan-Aragonese areas. Mercantile courts were characterized by sharp technical abilities and strong involvements in political powers; because of this, they had problematic relationships with other decision-making centers and ordinary courts. The aim of this paper is to focus on the essential features and the historical development of such institutions, by exploring the case-study of Tuscan and Catalan cities in a comparative approach. Starting from the analysis of the birth and growth of the urban and mercantile institutions in these two observatories, and focusing on the different influences of Roman law and royal powers, this paper suggests an interpretative key to point out the peculiarities of such contexts.

  8. 75 FR 52300 - Merchant Marine Act and Magnuson-Stevens Fishery Conservation and Management Act Provisions...

    Science.gov (United States)

    2010-08-25

    ...-Stevens Fishery Conservation and Management Act Provisions; Fishing Vessel, Fishing Facility and... the Fisheries Finance Program's programmatic regulations. The proposed rule was published with an...

  9. Teaching Jessica: race, religion, and gender in The Merchant of Venice

    Directory of Open Access Journals (Sweden)

    Sicher Efraim

    2016-09-01

    Full Text Available The Jew’s “fair daughter” in Shakespeare’s play The Merchant of Venice converts and marries a Christian, Lorenzo. Recent attention, however, to changing ideas of race and identity in the early modern period has brought into question the divisions of Christian/Jew/Moor. Can Jessica convert and no longer be considered the Jew’s daughter? As “gentle” and “fair” is she to be considered gentile and in no way dark (spiritually or racially? Jessica’s conversion has apparently little religious meaning, but rather she is saved from the Jew her father by marriage to Lorenzo, who becomes Shylock’s heir. Is Jessica’s conversion to be considered a matter of convenience that might, as Launcelot quips, raise the price of hogs, or is it also to be counted as an ideological and racial conversion that reveals underlying anxieties about gender, sexuality, and religious identity? This essay attempts to argue against the grain of the performance history of The Merchant History, which often downplays the role of Jessica or revises the text of the play, and returns to the text in order to contextualize the conversion of Jessica in contemporary discourses of gender, race, and religion in England’s expansionist colonialism and proto-capitalist commerce. The conversion of Jessica can be seen in that context as an exchange of monetary and ethical value, in which women’s sexuality also had a price-tag. These questions have implications for the teaching of the play and for the understanding of its concerns with unstable sexual, religious, and national identities.

  10. Interpretive analysis of the textual codes in the Parrot and Merchant story

    Directory of Open Access Journals (Sweden)

    Zohreh Najafi

    2016-06-01

    Full Text Available Abstract Narratology is a brunch of semiology which considers any kind of narrative, literary or non literary, verbal or visual, story or non story and after this specifies the plot. One of the most important subjects in narratology is the interpretation of textual cods which based on can be understood a lot of hidden meanings. Molavi expresses a lot of mystic points in Mathnavi in narrative form which some of his ideas can be realized in the first study but these ideas aren’t all of subjects which he wants to say and a complex of different meaning is hidden in any narrative which can be revealed by consideration of cods.     In terminology of semiology, code is a special situation in historical process of all of indexes and signs which specified for synchronized analyze. In review of literary texts textual cods are more important. Textual cods are the cods which their ambit is more extended than few special text and links these texts to each other in an interpretational form. Aesthetic cods are a group of textual cods which are used in different arts like: poem, painting, theater, music and so on.       The style of expression of aesthetic cods is the same style of art and literature. In the review of Mathnavi's narratives paying attention to narrative cods and using them can be considered as paralinguistic signs. Narrative cods contain interpretational form which used by authors and commentators of texts. In the story of parrot and merchant the textual cods are as follows:   - Parrot: in this story parrot is a symbolic code which shows all of human soul's features.   - Merchant: in this story merchant act as a cultural code which indicates rich who always are solicitous about their finance and are unaware of spiritual world.    - India: in this story India as a signifier code indicates spiritual world. Hermeneutic cods   Molana uses codes which act as turning point and addressed can understand hidden meanings which haven

  11. Vessels in Transit - Web Tool

    Data.gov (United States)

    Department of Transportation — A web tool that provides real-time information on vessels transiting the Saint Lawrence Seaway. Visitors may sort by order of turn, vessel name, or last location in...

  12. Radiant vessel auxiliary cooling system

    Science.gov (United States)

    Germer, John H.

    1987-01-01

    In a modular liquid-metal pool breeder reactor, a radiant vessel auxiliary cooling system is disclosed for removing the residual heat resulting from the shutdown of a reactor by a completely passive heat transfer system. A shell surrounds the reactor and containment vessel, separated from the containment vessel by an air passage. Natural circulation of air is provided by air vents at the lower and upper ends of the shell. Longitudinal, radial and inwardly extending fins extend from the shell into the air passage. The fins are heated by radiation from the containment vessel and convect the heat to the circulating air. Residual heat from the primary reactor vessel is transmitted from the reactor vessel through an inert gas plenum to a guard or containment vessel designed to contain any leaking coolant. The containment vessel is conventional and is surrounded by the shell.

  13. Attachment Fitting for Pressure Vessel

    Science.gov (United States)

    Smeltzer, Stanley S., III (Inventor); Carrigan, Robert W. (Inventor)

    2002-01-01

    This invention provides sealed access to the interior of a pressure vessel and consists of a tube. a collar, redundant seals, and a port. The port allows the seals to be pressurized and seated before the pressure vessel becomes pressurized.

  14. 26 CFR 2.1 - Statutory provisions; sections 511 and 905, Merchant Marine Act, 1936, and related statutes.

    Science.gov (United States)

    2010-04-01

    ..., reconstruction, reconditioning, or acquisition of vessels, or for other purposes authorized in this section... fisheries or owns in whole or in part a vessel or vessels being so operated, or who, at the time of purchase... vessel or vessels for the purpose of operation in such commerce or in the fisheries, may establish a...

  15. Mobile nuclear reactor containment vessel

    International Nuclear Information System (INIS)

    Thompson, R.E.; Spurrier, F.R.; Jones, A.R.

    1978-01-01

    A containment vessel for use in mobile nuclear reactor installations is described. The containment vessel completely surrounds the entire primary system, and is located as close to the reactor primary system components as is possible in order to minimize weight. In addition to being designed to withstand a specified internal pressure, the containment vessel is also designed to maintain integrity as a containment vessel in case of a possible collision accident

  16. Spent fuel transporting vessel

    International Nuclear Information System (INIS)

    Kumagaya, Takeshi.

    1995-01-01

    A large number of annular cooling fins are disposed each at an equal distance on the outer circumferential surface of a vessel main body. An electric power generation module is disposed on the surface of the cooling fins. The electric power generation module comprises a plurality of thermoelectric power generation elements. In each of the thermoelectric generation elements, the inner side thereof in contact with the surface of the cooling fin is at a high temperature while the outer side thereof is at a low temperature nearly equal with an atmospheric temperature. A predetermined amount of electric power is generated by seebeck effect due to the temperature difference. The electric power is always stored in a battery. Accordingly, even if a power generator of a ship should fail and power supply is stopped during transportation of the vessels for spent nuclear fuels, an appropriate amount of electric power can be supplied to a cooling device of the ship. (I.N.)

  17. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    An apparatus is described for sealing a cold leg nozzle of a nuclear reactor pressure vessel from a remote location comprising: at least one sealing plug for mechanically sealing the nozzle from the inside of the reactor pressure vessel. The sealing plug includes a plate and a cone assembly having an end part receptive in the nozzle, the plate being axially moveable relative to the cone assembly. The plate and cone assembly have confronting bevelled edges defining an opening therebetween. A primary O-ring is disposed about the opening and is supported on the bevelled edges, the plate being guidably mounted to the cone assembly for movement toward the cone assembly to radially expand the primary O-ring into sealing engagement with the nozzle. A means is included for providing relative movement between the outer plate and the cone assembly

  18. Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Van de Velde, J.; Fabry, A.; Van Walle, E.; Chaoudi, R

    1998-07-01

    SCK-CEN's R and D programme on Reactor Pressure Vessel (RPV) Steels in performed in support of the RVP integrity assessment. Its main objectives are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate the applied methodology on a broad database; (3) to achieve regulatory acceptance and industrial use. Progress and achievements in 1999 are reported.

  19. High pressure storage vessel

    Science.gov (United States)

    Liu, Qiang

    2013-08-27

    Disclosed herein is a composite pressure vessel with a liner having a polar boss and a blind boss a shell is formed around the liner via one or more filament wrappings continuously disposed around at least a substantial portion of the liner assembly combined the liner and filament wrapping have a support profile. To reduce susceptible to rupture a locally disposed filament fiber is added.

  20. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomenology of radiation-induced changes in blood vessels are systematized and authors' experience is generalized. Modern concepts about processes leading to vessel structure injury after irradiation is critically analyzed. Special attention is paid to reparation and compensation of X-ray vessel injury, consideration of which is not yet sufficiently elucidated in literature

  1. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomeology of radiation changes of blood vessels are systemized and the authors' experience is generalyzed. A critical analysis of modern conceptions on processes resulting in vessel structure damage after irradiation, is given. Special attention is paid to reparation and compensation of radiation injury of vessels

  2. Fabrication of mercury target vessel

    International Nuclear Information System (INIS)

    Wakui, Takashi; Kogawa, Hiroyuki; Haga, Katsuhiro; Futakawa, Masatoshi; Hayashi, Ryoichi; Uchiyama, Naoyoshi; Okamoto, Yoshinao; Nakamura, Koji

    2010-03-01

    The construction of materials and life science experimental facility in J-PARC (Japan Proton Accelerator Complex) project had been completed and accepted pulsed proton beams with low power. Since 2003, the detailed design, fabrication and examination for the mercury target vessel as a pulsed neutron source were carried out by the vender. The mercury target vessel consists of triple-walled structure in order to prevent the leak of mercury to outside at the failure of the mercury vessel and to remove the heat of the safety hull, which covers the mercury vessel, due to the injection of the pulsed proton beams. The high fabrication accuracy is required for the mercury target vessel assembled by the welding, because there are the relationships between the mercury target vessel and other components (target trolley, target storage container, flange of helium vessel, reflector and water-cooled shield). At each fabrication step, the examinations for the mercury target vessel with multi-walled structure were required. In this report, the required specification and basic structure of parts in the mercury target vessel are described and the fabrication procedure of the mercury target vessel by the vender is reported. In the fabrication of the mercury target vessel, there were many troubles such as large deformation due to the welding and then the vender repaired and brought the mercury target vessel to completion. Furthermore, improvements for the design and fabrication of the mercury target are reported. (author)

  3. Reactor pressure vessel nozzle

    Science.gov (United States)

    Challberg, Roy C.; Upton, Hubert A.

    1994-01-01

    A nozzle for joining a pool of water to a nuclear reactor pressure vessel includes a tubular body having a proximal end joinable to the pressure vessel and a distal end joinable in flow communication with the pool. The body includes a flow passage therethrough having in serial flow communication a first port at the distal end, a throat spaced axially from the first port, a conical channel extending axially from the throat, and a second port at the proximal end which is joinable in flow communication with the pressure vessel. The inner diameter of the flow passage decreases from the first port to the throat and then increases along the conical channel to the second port. In this way, the conical channel acts as a diverging channel or diffuser in the forward flow direction from the first port to the second port for recovering pressure due to the flow restriction provided by the throat. In the backflow direction from the second port to the first port, the conical channel is a converging channel and with the abrupt increase in flow area from the throat to the first port collectively increase resistance to flow therethrough.

  4. Reconsidering the European regulation of merchant transmission investment in light of the third energy package: The role of dominant generators

    International Nuclear Information System (INIS)

    Hauteclocque, Adrien de; Rious, Vincent

    2011-01-01

    The regulation of merchant transmission investment (MTI) has become an important issue in the EU electricity sector, subsequent to the granting of authorizations by European authorities to five merchant projects: BritNed, Estlink, the East West Cables, NorGer and recently a merchant line connecting Italy and Austria. The creation of a new Agency for the Cooperation of Energy Regulators (ACER) at the EU level, which has decision-making powers on MTI, therefore presents a unique opportunity to question and re-design the current European policy. This paper shows that the recent decisions concerning MTI may suffer a strong bias against dominant electricity generators while incumbent Transmission System Operators (TSOs) or new entrant TSOs are generally favored by national regulators and the European Commission (EC). This strategy is misguided as it fails to recognize both the new incentives of generators to develop MTI and the conflict of interest between the regulated and non-regulated activities of incumbent TSOs. Letting dominant generators undertake MTI is indeed generally beneficial as long as potential abuses of dominance are mitigated. To deter possible anti-competitive effects, we propose a new and feasible allocation of regulatory powers based on a clear demarcation between the market monitoring powers of ACER and the antitrust powers of the EC. - Highlights: → We compare TSOs and generators as merchant transmission investors in Europe. → We find a bias among regulators against the involvement of generators. → The conflict of interest with the regulated activities of TSOs is under-estimated. → Investment by generators is preferable provided market manipulation is deterred. → We propose a new allocation of regulatory powers to make it possible.

  5. Green Arctic Patrol Vessel

    Science.gov (United States)

    2011-08-01

    Complement Flexible space for hovercraft , airboats, USVs and RHIBs Naval Surface Warfare Center Carderock Division Green Arctic Patrol Vessel 1...through Sea State 3 (SS3). Flexible capability for a variety of organic craft, such as boat, hovercraft and/or Unmanned Underwater Vehicles (UUVs...2.0, Finland 6.0 2.7 2.8 6 1.8 Hovercraft Griffon/500TD 8.04 3.92 2.41 99 5 ~1.5 Hovercraft Griffon/2000TD 12.7 6.1 3.93 450 20

  6. New products from the power merchant to customer with time measurements and load management

    International Nuclear Information System (INIS)

    Solem, Gerd; Doorman, Gerard; Grande, Ove S.

    2003-01-01

    The main aim is to develop products from the power merchants that improve the consumer flexibility. For the development of the products the basis is that the consumption is measured by hours and that a connection to a load management scheme is present. Calculations for four products are made where the risk exposure is different for the customer and the supplier. The four products are ''Spot price with mark-up'', ''The combination of constant price and spot price'', ''Constant price with disconnection'' and ''Effect subscription''. The customers are exposed to the spot price in the first two products and may through disconnection reduce the costs by adapting to the market signals. Remote disconnection of parts of the consumption may be offered as a service jointly by the network companies and the power suppliers through a two-way communication but it is not realistic that the customers may pay much for this. ''Spot price with mark-up'' implies that the customer carries the entire risk while constant price may place considerable risk at the power supplier by long high consumption combined with high spot prices. '' Constant price with disconnection'' gives the power supplier the possibilities of reducing the risks. A disconnection possibility that is committing to the customers may be part of the product specification. The customers may be offered a discount calculated out from the costs for alternative price securing. Also '' Effect subscription'' reduces the merchant risks considerably at the disconnection of the consumption. The ''combined product of constant and spot price'' may be interesting from the supplier's viewpoint due to considerable risk reductions compared to solely using the constant price. The product gives the customers a guaranteed price for a part of the product and has an additional possibility of adapting the consumption to the market signals. The network company routines for handling of the hour values are a large challenge. It is important to

  7. An automated vessel segmentation of retinal images using multiscale vesselness

    International Nuclear Information System (INIS)

    Ben Abdallah, M.; Malek, J.; Tourki, R.; Krissian, K.

    2011-01-01

    The ocular fundus image can provide information on pathological changes caused by local ocular diseases and early signs of certain systemic diseases, such as diabetes and hypertension. Automated analysis and interpretation of fundus images has become a necessary and important diagnostic procedure in ophthalmology. The extraction of blood vessels from retinal images is an important and challenging task in medical analysis and diagnosis. In this paper, we introduce an implementation of the anisotropic diffusion which allows reducing the noise and better preserving small structures like vessels in 2D images. A vessel detection filter, based on a multi-scale vesselness function, is then applied to enhance vascular structures.

  8. Occupational accidents in the Danish merchant fleet and the nationality of seafarers

    DEFF Research Database (Denmark)

    Ádám, Balázs; Rasmussen, Hanna Barbara; Nørgaard Fløe Pedersen, Randi

    2014-01-01

    Background: The aim of the study was to examine occupational accidents reported from non-passenger merchant ships registered in the Danish International Ship Register in 2010-2012, with a focus on analysing nationality differences in the risk of getting injured in an accident. Methods: Data about...... be attributed to various factors such as safety behaviour. Investigation of special injury types and characterisation of effective elements of safety culture can contribute to the improvement of workplace safety in the maritime sector....... notified occupational accidents were collected from notifications sent to the Danish Maritime Authority and from records of contact with Danish Radio Medical. Events were matched by personal identification and accident data to create a unified database. Stratified cumulative time spent on board...... by seafarers was used to calculate accident rates. Incidence rates of different nationalities were compared by Poisson regression. Results: Western European seafarers had an overall accident rate of 17.5 per 100000 person-days, which proved to be significantly higher than that of Eastern European, South East...

  9. The vessel fluence; Fluence cuve

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This book presents the proceedings of the technical meeting on the reactors vessels fluence. They are grouped in eight sessions: the industrial context and the stakes of the vessels control; the organization and the methodology for the fluence computation; the concerned physical properties; the reference computation methods; the fluence monitoring in an industrial context; vessels monitoring under irradiation; others methods in the world; the research and development programs. (A.L.B.)

  10. Vessel segmentation in screening mammograms

    Science.gov (United States)

    Mordang, J. J.; Karssemeijer, N.

    2015-03-01

    Blood vessels are a major cause of false positives in computer aided detection systems for the detection of breast cancer. Therefore, the purpose of this study is to construct a framework for the segmentation of blood vessels in screening mammograms. The proposed framework is based on supervised learning using a cascade classifier. This cascade classifier consists of several stages where in each stage a GentleBoost classifier is trained on Haar-like features. A total of 30 cases were included in this study. In each image, vessel pixels were annotated by selecting pixels on the centerline of the vessel, control samples were taken by annotating a region without any visible vascular structures. This resulted in a total of 31,000 pixels marked as vascular and over 4 million control pixels. After training, the classifier assigns a vesselness likelihood to the pixels. The proposed framework was compared to three other vessel enhancing methods, i) a vesselness filter, ii) a gaussian derivative filter, and iii) a tubeness filter. The methods were compared in terms of area under the receiver operating characteristics curves, the Az values. The Az value of the cascade approach is 0:85. This is superior to the vesselness, Gaussian, and tubeness methods, with Az values of 0:77, 0:81, and 0:78, respectively. From these results, it can be concluded that our proposed framework is a promising method for the detection of vessels in screening mammograms.

  11. Americium behaviour in plastic vessels

    Energy Technology Data Exchange (ETDEWEB)

    Legarda, F.; Herranz, M. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Idoeta, R., E-mail: raquel.idoeta@ehu.e [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Abelairas, A. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2010-07-15

    The adsorption of {sup 241}Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of {sup 241}Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of {sup 241}Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  12. Americium behaviour in plastic vessels

    International Nuclear Information System (INIS)

    Legarda, F.; Herranz, M.; Idoeta, R.; Abelairas, A.

    2010-01-01

    The adsorption of 241 Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of 241 Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of 241 Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  13. [Large vessel vasculitides].

    Science.gov (United States)

    Morović-Vergles, Jadranka; Puksić, Silva; Gracanin, Ana Gudelj

    2013-01-01

    Large vessel vasculitis includes Giant cell arteritis and Takayasu arteritis. Giant cell arteritis is the most common form of vasculitis affect patients aged 50 years or over. The diagnosis should be considered in older patients who present with new onset of headache, visual disturbance, polymyalgia rheumatica and/or fever unknown cause. Glucocorticoides remain the cornerstone of therapy. Takayasu arteritis is a chronic panarteritis of the aorta ant its major branches presenting commonly in young ages. Although all large arteries can be affected, the aorta, subclavian and carotid arteries are most commonly involved. The most common symptoms included upper extremity claudication, hypertension, pain over the carotid arteries (carotidynia), dizziness and visual disturbances. Early diagnosis and treatment has improved the outcome in patients with TA.

  14. Reactor pressure vessel embrittlement

    International Nuclear Information System (INIS)

    1992-07-01

    Within the framework of the IAEA extrabudgetary programme on the Safety of WWER-440/230 NPPs, a list of safety issues requiring broad studies of generic interest have been agreed upon by an Advisory Group who met in Vienna in September 1990. The list was later revised in the light of the programme findings. The information on the status of the issues, and on the amount of work already completed and under way in the various countries, needs to be compiled. Moreover, an evaluation of what further work is required to resolve each one of the issues is also necessary. In view of this, the IAEA has started the preparation of a series of status reports on the various issues. This report on the generic safety issue ''Reactor Pressure Vessel Embrittlement'' presents a comprehensive survey of technical information available in the field and identifies those aspects which require further investigation. 39 refs, 21 figs, 4 tabs

  15. Coronary single vessel disease

    International Nuclear Information System (INIS)

    Kaltenbach, M.; Kober, G.; Satter, P.; Gruentzig, A.; Myler, R.; Sterzer, S.

    1980-01-01

    The seven-years-survival rate is about 80 percent with respect to the most favourable long-time prognosis for coronary single vessel diseases under conservative therapy. In this contribution the control angiography of 76 patients after aorto-coronary bypass operation or transluminal angioplastic is reported. Only two patients subjected to a bypass operation. The recidivity rate is 10 percent after an operation, whereby it is not possible to make a recidivity prognosis. If a recidivity shows up it is being developped during the first three months. If the control angiography three months after the operation shows a good result, then a favourable steady state result can be expected. A comparison of the result with four different centers is given. (APR) [de

  16. Pressure vessel for nuclear reactors

    International Nuclear Information System (INIS)

    1975-01-01

    The invention applies to a pressure vessel for nuclear reactors whose shell, made of cast metal segments, has a steel liner. This liner must be constructed to withstand all operational stresses and to be easily repairable. The invention solves this problem by installing the liner at a certain distance from the inner wall of the pressure vessel shell and by filling this clearance with supporting concrete. Both the concrete and the steel liner must have a lower prestress than the pressure vessel shell. In order to avoid damage to the liner when prestressing the pressure vessel shell, special connecting elements are provided which consist of welded-on fastening elements projecting into recesses in the cast metal segments of the pressure vessel. Their design is described in detail. (TK) [de

  17. Nestorian ‘merchant missionaries’ – A model for Christian Chinese migrants

    Directory of Open Access Journals (Sweden)

    John Gordy

    2015-04-01

    Full Text Available Both the Old and New Testament lay a foundation for the role of migrants in God’s mission, missio Dei. With the unprecedented rise of the Global South to prominence in the world mission enterprise, China is poised to play a major role in fulfilling the Great Commission Mandate. Already Christian Chinese migrants are in many countries, possibly in over 140 countries of the world, including many of the unreached, unengaged people groups. The Nestorians, also called ‘merchant missionaries’, were amongst the first to take the gospel to China. They can serve as a methodological mission model, using some basic biblical principles, to help Christian Chinese migrants today, especially the Wenzhou businessmen, to fulfil their apostolic role in world mission. Sowel die Ou as die Nuwe Testament lê ’n fondament vir die rol van nomades (rondtrekkendes in God se missie (missio Dei. Met die Globale Suide se ongeëwenaarde toename in prominensie ten opsigte van die onderneming van wêreldsending, is China gereed om ’n hoofrol in die verwesenliking van die Groot Sendingopdrag te vertolk. Chinese Christen nomades is alreeds in 140 lande van die wêreld besig, waarvan baie tussen die onbereikte, onbesette mensegroepe is. Die Nestoriane, of ‘kooplui-sendelinge’, was van die eerste sendelinge wat die evangelie na China geneem het. Hulle voorbeeld kan as ’n sendingmodel dien om Chinese Christen nomades te help, veral die Wenzhou-sakemanne, om hulle apostoliese rol in wêreldsending te vervul.

  18. Containment vessel stability analysis

    International Nuclear Information System (INIS)

    Harstead, G.A.; Morris, N.F.; Unsal, A.I.

    1983-01-01

    The stability analysis for a steel containment shell is presented herein. The containment is a freestanding shell consisting of a vertical cylinder with a hemispherical dome. It is stiffened by large ring stiffeners and relatively small longitudinal stiffeners. The containment vessel is subjected to both static and dynamic loads which can cause buckling. These loads must be combined prior to their use in a stability analysis. The buckling loads were computed with the aid of the ASME Code case N-284 used in conjunction with general purpose computer codes and in-house programs. The equations contained in the Code case were used to compute the knockdown factors due to shell imperfections. After these knockdown factors were applied to the critical stress states determined by freezing the maximum dynamic stresses and combining them with other static stresses, a linear bifurcation analysis was carried out with the aid of the BOSOR4 program. Since the containment shell contained large penetrations, the Code case had to be supplemented by a local buckling analysis of the shell area surrounding the largest penetration. This analysis was carried out with the aid of the NASTRAN program. Although the factor of safety against buckling obtained in this analysis was satisfactory, it is claimed that the use of the Code case knockdown factors are unduly conservative when applied to the analysis of buckling around penetrations. (orig.)

  19. Cruel Seas: World War 2 Merchant Marine-Related Nautical Fiction from the 1930s to Present

    OpenAIRE

    Krummes, Daniel C

    2015-01-01

    Cruel Seas is an annotated bibliography of fiction in English that involves civilian steamships of the merchant marine in works set during World War Two (or slightly before).  While the subtitle states "1930s to Present," the last entry was added in 2008, and the work will not be updated.  The entries include novels, novellas, and short stories, but exclude poetry, theater plays, and fiction written for juveniles (unless the work can appeal to adults as well). Many of the works invol...

  20. 46 CFR 391.0 - Statutory provisions; section 607, Merchant Marine Act, 1936, as amended.

    Science.gov (United States)

    2010-10-01

    ... States foreign, Great Lakes, or noncontiguous domestic trade or in the fisheries of the United States and... the United States or in the fisheries of the United States. (B) The amount allowable as a deduction... agreement but only if it is for: (A) The acquisition, construction, or reconstruction of a qualified vessel...

  1. 26 CFR 3.0 - Statutory provisions; section 607, Merchant Marine Act, 1936, as amended.

    Science.gov (United States)

    2010-04-01

    ... capital. If at any time the fair market value of the stock in the fund is more than the agreed percentage... situation in which the fair market value of the stock does not exceed such agreed percentage. For purposes... reconstruction of a qualified vessel, (B) The acquisition, construction, or reconstruction of barges and...

  2. BY FRUSTUM CONFINING VESSEL

    Directory of Open Access Journals (Sweden)

    Javad Khazaei

    2016-09-01

    Full Text Available Helical piles are environmentally friendly and economical deep foundations that, due to environmental considerations, are excellent additions to a variety of deep foundation alternatives available to the practitioner. Helical piles performance depends on soil properties, the pile geometry and soil-pile interaction. Helical piles can be a proper alternative in sensitive environmental sites if their bearing capacity is sufficient to support applied loads. The failure capacity of helical piles in this study was measured via an experimental research program that was carried out by Frustum Confining Vessel (FCV. FCV is a frustum chamber by approximately linear increase in vertical and lateral stresses along depth from top to bottom. Due to special geometry and applied bottom pressure, this apparatus is a proper choice to test small model piles which can simulate field stress conditions. Small scale helical piles are made with either single helix or more helixes and installed in fine grained sand with three various densities. Axial loading tests including compression and tension tests were performed to achieve pile ultimate capacity. The results indicate the helical piles behavior depends essentially on pile geometric characteristics, i.e. helix configuration and soil properties. According to the achievements, axial uplift capacity of helical model piles is about equal to usual steel model piles that have the helixes diameter. Helical pile compression bearing capacity is too sufficient to act as a medium pile, thus it can be substituted other piles in special geoenvironmental conditions. The bearing capacity also depends on spacing ratio, S/D, and helixes diameter.

  3. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Hagiwara, Koji; Imura, Yasuya.

    1979-01-01

    Purpose: To provide constituted method for easily performing baking of vacuum vessel, using short-circuiting segments. Constitution: At the time of baking, one turn circuit is formed by the vacuum vessel and short-circuiting segments, and current transformer converting the one turn circuit into a secondary circuit by the primary coil and iron core is formed, and the vacuum vessel is Joule heated by an induction current from the primary coil. After completion of baking, the short-circuiting segments are removed. (Kamimura, M.)

  4. PWR vessel inspection performance improvements

    International Nuclear Information System (INIS)

    Blair Fairbrother, D.; Bodson, Francis

    1998-01-01

    A compact robot for ultrasonic inspection of reactor vessels has been developed that reduces setup logistics and schedule time for mandatory code inspections. Rather than installing a large structure to access the entire weld inspection area from its flange attachment, the compact robot examines welds in overlapping patches from a suction cup anchor to the shell wall. The compact robot size allows two robots to be operated in the vessel simultaneously. This significantly reduces the time required to complete the inspection. Experience to date indicates that time for vessel examinations can be reduced to fewer than four days. (author)

  5. «Fabricado de dinero»: the Dishonest Merchant in «La industria y la suerte» by Ruiz de Alarcón

    Directory of Open Access Journals (Sweden)

    Victoriano Roncero

    2018-01-01

    Full Text Available In the 16th century, Europe witnesses the triumph of the pre-capitalist economy, personified by the merchant. This new situation brought the rejection of the humanists, who wrote about the society’s decadence of values and the destruction of social status. Ruiz de Alarcón wrote La industria y la suerte, a play in which he describes the confrontation between the Sevillian traders and the nobility. Arnesto, the merchant, represents the corruption brought on by money, and, because of that, Don Juan defeats him in his attempt to gain Blanca’s love by the play’s end.

  6. Special enclosure for a pressure vessel

    International Nuclear Information System (INIS)

    Wedellsborg, B.W.; Wedellsborg, U.W.

    1993-01-01

    A pressure vessel enclosure is described comprising a primary pressure vessel, a first pressure vessel containment assembly adapted to enclose said primary pressure vessel and be spaced apart therefrom, a first upper pressure vessel jacket adapted to enclose the upper half of said first pressure vessel containment assembly and be spaced apart therefrom, said upper pressure vessel jacket having an upper rim and a lower rim, each of said rims connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, mean for connecting in a sealable relationship said upper rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, means for connecting in a sealable relationship said lower rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a first lower pressure vessel jacket adapted to enclose the lower half of said first pressure vessel containment assembly and be spaced apart therefrom, said lower pressure vessel jacket having an upper rim connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, and means for connecting in a sealable relationship said upper rim of said first lower pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a second upper pressure vessel jacket adapted to enclose said first upper pressure vessel jacket and be spaced apart therefrom, said second upper pressure vessel jacket having an upper rim and a lower rim, each of said rims adapted to slidably engage the outer surface of said first upper pressure vessel jacket, means for sealing said rims, a second lower pressure vessel jacket adapted to enclose said first lower pressure vessel jacket and be spaced apart therefrom

  7. 2013 East Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  8. SC/OQ Vessel Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data tables holding information for the Surf Clam/Ocean Quahog vessel and dealer/processor logbooks (negative and positive), as well as individual tag information...

  9. 2013 West Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  10. 2011 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  11. Targeting Therapy Resistant Tumor Vessels

    National Research Council Canada - National Science Library

    Ruoslahti, Erkki

    2007-01-01

    .... To achieve this, we have developed tumor models for vascular normalization and are using in vivo phage display and isolation of peptides that specifically home to normalized tumor vessels resistant...

  12. Targeting Therapy Resistant Tumor Vessels

    National Research Council Canada - National Science Library

    Ruoslahti, Erkki

    2008-01-01

    .... To achieve this, we have developed tumor models for vascular normalization and are using in vivo phage display and isolation of peptides that specifically home to normalized tumor vessels resistant...

  13. Vessel Permit System Data Set

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GARFO issues federal fishing permits annually to owners of fishing vessels who fish in the Greater Atlantic region, as required by federal regulation. These permits...

  14. Level indicator for pressure vessels

    Science.gov (United States)

    Not Available

    1982-04-28

    A liquid-level monitor for tracking the level of a coal slurry in a high-pressure vessel including a toroidal-shaped float with magnetically permeable bands thereon disposed within the vessel, two pairs of magnetic-field generators and detectors disposed outside the vessel adjacent the top and bottom thereof and magnetically coupled to the magnetically permeable bands on the float, and signal-processing circuitry for combining signals from the top and bottom detectors for generating a monotonically increasing analog control signal which is a function of liquid level. The control signal may be utilized to operate high-pressure control valves associated with processes in which the high-pressure vessel is used.

  15. Caribbean PR Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch (landed catch) and effort for fishing trips made by vessels fishing in Puerto Rico. The catch and effort data for the entire trip are...

  16. Reactor pressure vessel status report

    International Nuclear Information System (INIS)

    Strosnider, J.; Wichman, K.; Elliot, B.

    1994-12-01

    This report gives a brief description of the reactor pressure vessel (RPV), followed by a discussion of the radiation embrittlement of RPV beltline materials and the two indicators for measuring embrittlement, the end-of-license (EOL) reference temperature and the EOL upper-shelf energy. It also summarizes the GL 92-01 effort and presents, for all 37 boiling water reactor plants and 74 pressurized water reactor plants in the United States, the current status of compliance with regulatory requirements related to ensuring RPV integrity. The staff has evaluated the material data needed to predict neutron embrittlement of the reactor vessel beltline materials. These data will be stored in a computer database entitled the reactor vessel integrity database (RVID). This database will be updated annually to reflect the changes made by the licensees in future submittals and will be used by the NRC staff to assess the issues related to vessel structural integrity

  17. 2013 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  18. Coastal Discard Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data on the type and amount of marine resources that are discarded or interacted with by vessels that are selected to report to the Southeast...

  19. 2011 East Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  20. Prosopomorphic vessels from Moesia Superior

    Directory of Open Access Journals (Sweden)

    Nikolić Snežana

    2008-01-01

    Full Text Available The prosopomorphic vessels from Moesia Superior had the form of beakers varying in outline but similar in size. They were wheel-thrown, mould-made or manufactured by using a combination of wheel-throwing and mould-made appliqués. Given that face vessels are considerably scarcer than other kinds of pottery, more than fifty finds from Moesia Superior make an enviable collection. In this and other provinces face vessels have been recovered from military camps, civilian settlements and necropolises, which suggests that they served more than one purpose. It is generally accepted that the faces-masks gave a protective role to the vessels, be it to protect the deceased or the family, their house and possessions. More than forty of all known finds from Moesia Superior come from Viminacium, a half of that number from necropolises. Although tangible evidence is lacking, there must have been several local workshops producing face vessels. The number and technological characteristics of the discovered vessels suggest that one of the workshops is likely to have been at Viminacium, an important pottery-making centre in the second and third centuries.

  1. Autonomous ships in sight: Starting signal for the unmanned merchant shipping project MUNIN

    OpenAIRE

    Burmeister, Hans-Christoph

    2012-01-01

    Autonomous and unmanned vessels are seen as a key element in a competitive and sustainable European shipping industry in the future. For this reason, a new research project called MUNIN (Maritime Unmanned Navigation through Intelligence in Networks) started this September aiming to develop a concept for autonomous ships and to prove its feasibility. It is named after the Old Norse raven, Munin that flew around the world each day without guidance, gathering information and safely returning it ...

  2. The TPX vacuum vessel and in-vessel components

    International Nuclear Information System (INIS)

    Heitzenroeder, P.; Bialek, J.; Ellis, R.; Kessel, C.; Liew, S.

    1994-01-01

    The Tokamak Physics Experiment (TPX) is a superconducting tokamak with double-null diverters. TPX is designed for 1,000-second discharges with the capability of being upgraded to steady state operation. High neutron yields resulting from the long duration discharges require that special consideration be given to materials and maintainability. A unique feature of the TPX is the use of a low activation, titanium alloy vacuum vessel. Double-wall vessel construction is used since it offers an efficient solution for shielding, bakeout and cooling. Contained within the vacuum vessel are the passive coil system, Plasma Facing Components (PFCs), magnetic diagnostics, and the internal control coils. All PFCs utilize carbon-carbon composites for exposed surfaces

  3. 12 CFR 225.176 - How do the statutory cross marketing and sections 23A and B limitations apply to merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false How do the statutory cross marketing and sections 23A and B limitations apply to merchant banking investments? 225.176 Section 225.176 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING...

  4. 12 CFR 225.171 - What are the limitations on managing or operating a portfolio company held as a merchant banking...

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false What are the limitations on managing or operating a portfolio company held as a merchant banking investment? 225.171 Section 225.171 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING...

  5. Testing internal coatings in metal vessels

    Science.gov (United States)

    Ruby, A.; Perkins, P.

    1978-01-01

    Presence of pinholes or defects in nonconductive protective coating on inside surface of closed vessel is detected if vessel has one opening into which small stainless-steel probe can be introduced. By inserting probe and attaching another to outside surface, and by filling vessel with ten percent sodium chloride solution, integrity of coating is determined by measuring electrical conductivity through vessel wall.

  6. 46 CFR 119.330 - Pressure vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pressure vessels. 119.330 Section 119.330 Shipping COAST... Machinery § 119.330 Pressure vessels. All unfired pressure vessels must be installed to the satisfaction of the cognizant OCMI. The design, construction, and original testing of such unfired pressure vessels...

  7. 46 CFR 182.330 - Pressure vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure vessels. 182.330 Section 182.330 Shipping COAST...) MACHINERY INSTALLATION Auxiliary Machinery § 182.330 Pressure vessels. All unfired pressure vessels must be... unfired pressure vessels must meet the applicable requirements of subchapter F (Marine Engineering) of...

  8. Photoacoustic determination of blood vessel diameter

    NARCIS (Netherlands)

    Kolkman, R.G.M.; Klaessens, John H.G.M.; Hondebrink, Erwin; Hopman, Jeroen C.W.; de Mul, F.F.M.; Steenbergen, Wiendelt; Thijssen, Johan M.; van Leeuwen, Ton

    2004-01-01

    A double-ring sensor was applied in photoacoustic tomographic imaging of artificial blood vessels as well as blood vessels in a rabbit ear. The peak-topeak time (τ pp) of the laser (1064 nm) induced pressure transient was used to estimate the axial vessel diameter. Comparison with the actual vessel

  9. 46 CFR 169.249 - Pressure vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure vessels. 169.249 Section 169.249 Shipping COAST... and Certification Inspections § 169.249 Pressure vessels. Pressure vessels must meet the requirements of part 54 of this chapter. The inspection procedures for pressure vessels are contained in subpart...

  10. Molten material-containing vessel

    International Nuclear Information System (INIS)

    Akagawa, Katsuhiko

    1998-01-01

    The molten material-containing vessel of the present invention comprises a vessel main body having an entrance opened at the upper end, a lid for closing the entrance, an outer tube having an upper end disposed at the lower surface of the lid, extended downwardly and having an closed lower end and an inner tube disposed coaxially with the outer tube. When a molten material is charged from the entrance to the inside of the vessel main body of the molten material-containing vessel and the entrance is closed by the lid, the outer tube and the inner tube are buried in the molten material in the vessel main body, accordingly, a fluid having its temperature elevated by absorption of the heat of the molten material rises along the inner circumferential surface of the outer tube, abuts against the lower surface of the lid and cooled by exchanging heat with the lid and forms a circulating flow. Since the heat in the molten material is continuously absorbed by the fluid, transferred to the lid and released from the lid to the atmospheric air, heat releasing efficiency can be improved compared with conventional cases. (N.H.)

  11. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Kikuchi, Mitsuru; Nagashima, Keisuke; Suzuki, Masaru; Onozuka, Masaki.

    1997-01-01

    A vacuum vessel main body and structural members at the inside and the outside of the vacuum vessel main body are constituted by structural materials activated by irradiation of neutrons from plasmas such as stainless steels. Shielding members comprising tungsten or molybdenum are disposed on the surface of the vacuum vessel main body and the structural members of the inside and the outside of the main body. The shielding members have a function also as first walls or a seat member for the first walls. Armor tiles may be disposed to the shielding members. The shielding members and the armor tiles are secured to a securing seat member disposed, for example, to an inner plate of the vacuum vessel main body by bolts. Since the shielding members are disposed, it is not necessary to constitute the vacuum vessel main body and the structural members at the inside and the outside thereof by using a low activation material which is less activated, such as a titanium alloy. (I.N.)

  12. 19 CFR 4.5 - Government vessels.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Government vessels. 4.5 Section 4.5 Customs Duties... VESSELS IN FOREIGN AND DOMESTIC TRADES Arrival and Entry of Vessels § 4.5 Government vessels. (a) No... that is the property of, the U.S. Department of Defense (DoD) will be treated as a Government vessel...

  13. Pressure vessel for nuclear reactors

    International Nuclear Information System (INIS)

    Stoll, A.

    1976-01-01

    The invention relates to a pressure vessel which can be used for nuclear reactors and for chemical processing technologies. A grid of walls welded to each other, which is installed in the interior of the pressure vessel, is so attached to an outer jacket at several edges, that these edges exert a force on the wall of the vessel directed towards the interior. Only the out jacket resists the differential between the inner and outer pressures; the welded walls in the interior do not have to sustain any differential pressure. They create a larger number of inner spaces (or tubes) which can be individually accessible and each of which has a terminal element. (UWI) [de

  14. Emergency venting of pressure vessels

    International Nuclear Information System (INIS)

    Steinkamp, H.

    1995-01-01

    With the numerical codes developed for safety analysis the venting of steam vessel can be simulated. ATHLET especially is able to predict the void fraction depending on the vessel height. Although these codes contain a one-dimensional model they allow the description of complex geometries due to the detailed nodalization of the considered apparatus. In chemical reactors, however, the venting process is not only influenced by the flashing behaviour but additionally by the running chemical reaction in the vessel. Therefore the codes used for modelling have to consider the kinetics of the chemical reaction. Further multi-component systems and dissolving processes have to be regarded. In order to preduct the fluid- and thermodynamic process it could be helpful to use 3-dimensional codes in combination with the one-dimensional codes as used in nuclear industry to get a more detailed describtion of the running processes. (orig./HP)

  15. 46 CFR 116.1120 - Drainage of cockpit vessels, well deck vessels, and open boats.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Drainage of cockpit vessels, well deck vessels, and open... PASSENGERS CONSTRUCTION AND ARRANGEMENT Drainage and Watertight Integrity of Weather Decks § 116.1120 Drainage of cockpit vessels, well deck vessels, and open boats. Drainage of cockpit vessels, well deck...

  16. Stress analysis of pressure vessels

    International Nuclear Information System (INIS)

    Kim, B.K.; Song, D.H.; Son, K.H.; Kim, K.S.; Park, K.B.; Song, H.K.; So, J.Y.

    1979-01-01

    This interim report contains the results of the effort to establish the stress report preparation capability under the research project ''Stress analysis of pressure vessels.'' 1978 was the first year in this effort to lay the foundation through the acquisition of SAP V structural analysis code and a graphic terminal system for improved efficiency of using such code. Software programming work was developed in pre- and post processing, such as graphic presentation of input FEM mesh geometry and output deformation or mode shope patterns, which was proven to be useful when using the FEM computer code. Also, a scheme to apply fracture mechanics concept was developed in fatigue analysis of pressure vessels. (author)

  17. Vessel dilatation in coronary angiograms

    Energy Technology Data Exchange (ETDEWEB)

    Hinterauer, L.; Goebel, N.

    1983-11-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment.

  18. Vessel dilatation in coronary angiograms

    International Nuclear Information System (INIS)

    Hinterauer, L.; Goebel, N.

    1983-01-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment. (orig.) [de

  19. GROTESQUE ENCOUNTERS: READING SHAKESPEARE’S THE MERCHANT OF VENICE ALONG THE PRINCIPLES OF THE SUBLIME, BEAUTIFUL AND GROTESQUE

    Directory of Open Access Journals (Sweden)

    Kathrin Bartha

    2015-12-01

    Full Text Available This article is an attempt to apply the basic principles of the aesthetic discourse on the sublime, beautiful and grotesque to William Shakespeare's The Merchant of Venice. Even though it is a discourse that only begins in the course of the eighteenth century, I will argue that the structure of the play parallels the model of the traditional sublime, as it deals with a subject-object binary and meditates on the relationship between the material (body and the transcendental (mind. However, the play is also rich in disruptive — or grotesque — forces that unsettle this binary structure. The parallels between the play and the aesthetic discourse could not only help our understanding of postmodern criticism and rewriting of the sublime, but the sublime can also, in turn, shed light on the reception of the play.

  20. Elzevirian Republics, wise merchants, and new perspectives on Spain and Portugal in the seventeenth-century Dutch Republic

    Directory of Open Access Journals (Sweden)

    Sina Rauschenbach

    2013-05-01

    Full Text Available Between 1625 and 1649, the Leiden publishing house Elzevir issued a series of thirty-five descriptions of all European, a selection of non-European, and three ancient states, that became known as the ‘Elzevirian Republics’. This essay focuses on two of these ‘Republics’, Johannes de Laet’s descriptions of Spain and Portugal. I argue that these books convey an attitude towards geopolitics that is best understood in the light of Caspar Barlaeus’s ideal of the ‘wise merchant’ (mercator sapiens and the historical regent-merchant culture in seventeenth-century Amsterdam. The essay draws on recent scholarship in the history of knowledge, commerce, and the pre-history of objectivity.

  1. Commercial Passenger Fishing Vessel Fishery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the logbook data from U.S.A. Commercial Passenger Fishing Vessels (CPFV) fishing in the U.S.A. EEZ and in waters off of Baja California, from...

  2. The Vessel Schedule Recovery Problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Plum, Christian Edinger Munk; Vaaben, Bo

    Maritime transportation is the backbone of world trade and is accountable for around 3% of the worlds CO2 emissions. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker...

  3. Pressure vessel and method therefor

    Science.gov (United States)

    Saunders, Timothy

    2017-09-05

    A pressure vessel includes a pump having a passage that extends between an inlet and an outlet. A duct at the pump outlet includes at least one dimension that is adjustable to facilitate forming a dynamic seal that limits backflow of gas through the passage.

  4. Pressure vessel having continuous sidewall

    Science.gov (United States)

    Simon, Xavier D. (Inventor); Barackman, Victor J. (Inventor)

    2011-01-01

    A spacecraft pressure vessel has a tub member. A sidewall member is coupled to the tub member so that a bottom section of the sidewall member extends from an attachment intersection with the tub member and away from the tub member. The bottom section of the sidewall member receives and transfers a load through the sidewall member.

  5. Vessel tree extraction using locally optimal paths

    DEFF Research Database (Denmark)

    Lo, Pechin Chien Pau; van Ginneken, Bram; de Bruijne, Marleen

    2010-01-01

    This paper proposes a method to extract vessel trees by continually extending detected branches with locally optimal paths. Our approach uses a cost function from a multi scale vessel enhancement filter. Optimal paths are selected based on rules that take into account the geometric characteristics...... of the vessel tree. Experiments were performed on 10 low dose chest CT scans for which the pulmonary vessel trees were extracted. The proposed method is shown to extract a better connected vessel tree and extract more of the small peripheral vessels in comparison to applying a threshold on the output...

  6. AFSC/FMA/Vessel Assessment Logging

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Vessels fishing trawl gear, vessels fishing hook-and-line and pot gear that are also greater than 57.5 feet overall, and shoreside and floating processing facilities...

  7. 2013 EPA Vessels General Permit (VGP)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Information for any vessel that submitted a Notice of Intent (NOI), Notice of Termination (NOT), or annual report under EPA's 2013 Vessel General Permit (VGP)....

  8. Academic Research Vessels 1985-1990.

    Science.gov (United States)

    1982-01-01

    replacement, and only one of these vessels was larger than 100 ft. In addition to the recently completed replacements of the EASTWARD and the GILLISS by... GILLISS and R/V EASTWARD by two new coastal vessels, the R/V CAPE FLORIDA and R/V CAPE HATTERAS. These estimates for the cost of vessel replacement

  9. 33 CFR 151.1512 - Vessel safety.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vessel safety. 151.1512 Section... River § 151.1512 Vessel safety. Nothing in this subpart relieves the master of the responsibility for ensuring the safety and stability of the vessel or the safety of the crew and passengers, or any other...

  10. 50 CFR 300.125 - Vessel identification.

    Science.gov (United States)

    2010-10-01

    ... contrasting color to the background at least 18 inches (45.7 cm) in height for fishing vessels over 65 ft (19....125 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS Vessels of the United States Fishing in Colombian Treaty Waters § 300.125 Vessel identification...

  11. Reactor vessel supported by flexure member

    International Nuclear Information System (INIS)

    Crawford, J.D.; Pankow, B.

    1975-01-01

    A description is given of a reactor pressure vessel which is provided with vertical support means in the form of circumferentially spaced columns upon which the vessel is mounted. The columns are adapted to undergo flexure in order to accommodate the thermally induced displacements experienced by the vessel during operational transients

  12. Manufacturing technologies of PWR pressure vessels

    International Nuclear Information System (INIS)

    Qin Xubin

    1991-01-01

    Pressure vessels belong to the main component of PWR plants. Starting with describing the manufacture of pressure vessel components and their assembly, the manufacturing technologies of pressure vessels are briefly presented with regards to welding, heat treatment, inspections and testing. In addition, quality assurance during the manufacture is presented with emphasis

  13. Model tests for prestressed concrete pressure vessels

    International Nuclear Information System (INIS)

    Stoever, R.

    1975-01-01

    Investigations with models of reactor pressure vessels are used to check results of three dimensional calculation methods and to predict the behaviour of the prototype. Model tests with 1:50 elastic pressure vessel models and with a 1:5 prestressed concrete pressure vessel are described and experimental results are presented. (orig.) [de

  14. Integrating Multiple Autonomous Underwater Vessels, Surface Vessels and Aircraft into Oceanographic Research Vessel Operations

    Science.gov (United States)

    McGillivary, P. A.; Borges de Sousa, J.; Martins, R.; Rajan, K.

    2012-12-01

    Autonomous platforms are increasingly used as components of Integrated Ocean Observing Systems and oceanographic research cruises. Systems deployed can include gliders or propeller-driven autonomous underwater vessels (AUVs), autonomous surface vessels (ASVs), and unmanned aircraft systems (UAS). Prior field campaigns have demonstrated successful communication, sensor data fusion and visualization for studies using gliders and AUVs. However, additional requirements exist for incorporating ASVs and UASs into ship operations. For these systems to be optimally integrated into research vessel data management and operational planning systems involves addressing three key issues: real-time field data availability, platform coordination, and data archiving for later analysis. A fleet of AUVs, ASVs and UAS deployed from a research vessel is best operated as a system integrated with the ship, provided communications among them can be sustained. For this purpose, Disruptive Tolerant Networking (DTN) software protocols for operation in communication-challenged environments help ensure reliable high-bandwidth communications. Additionally, system components need to have considerable onboard autonomy, namely adaptive sampling capabilities using their own onboard sensor data stream analysis. We discuss Oceanographic Decision Support System (ODSS) software currently used for situational awareness and planning onshore, and in the near future event detection and response will be coordinated among multiple vehicles. Results from recent field studies from oceanographic research vessels using AUVs, ASVs and UAS, including the Rapid Environmental Picture (REP-12) cruise, are presented describing methods and results for use of multi-vehicle communication and deliberative control networks, adaptive sampling with single and multiple platforms, issues relating to data management and archiving, and finally challenges that remain in addressing these technological issues. Significantly, the

  15. Trusteeship and Cooperation in the Flemish merchants community in Cadiz: The brotherhood of “San Andrés de los Flamencos” (17th-18th centuries

    Directory of Open Access Journals (Sweden)

    Prof. Dr Ana Crespo Solana

    2013-06-01

    Full Text Available  This article presents information on the development, over the centuries, of a little known aspect of the communities of foreign Merchants who settled in Spanish cities during the Modern Age. Using previously unpublished documents, relating to the “Ilustre y Antigua Nación Flamenca” of Seville and Cádiz, the article aims to give a description of the charitable activities carried out by the colony of merchants in Seville and, especially, in Cádiz, who were natives of the Southern Low Countries and the Dutch Republic. This merchant community had assigned the administration of a “Patronato” to their brotherhood, which included the control of numerous items of furniture and properties of great value. The description of this religious and benevolent activity gives a no less interesting view, when compared with the purely economic one, of its importance on the integration of these communities into the Spanish society of the 17th and 18th centuries. This research has been made with historical documents from Spanish Archives (Cádiz, Madrid and Alcalá de Henares.

  16. Vessel for storing and disposing radioactive waste

    International Nuclear Information System (INIS)

    Takakura, Masahide.

    1997-01-01

    A vessel for storing and disposing radioactive wastes is composed of a containing vessel main body having an opening and a lid capable of fitting with the opening. The containing vessel main body is made into a cylindrical shape which can contain radioactive wastes therein. The containing vessel main body and the lid are made of a reinforced material such as carbon steels and stainless steels respectively. A plurality of fin set up-seats are disposed, each at a same distance, detachably to the outer surface of the containing vessel main body in parallel with the axial line of the containing vessel main body. Heat dissipating fins are secured on the outer surface of the fin set-up-seats. With such a constitution, there can be obtained a vessel suitable to underground disposal of radioactive wastes after cooling and storing them till removal of after heat. (I.N.)

  17. What is cerebral small vessel disease?

    International Nuclear Information System (INIS)

    Onodera, Osamu

    2011-01-01

    An accumulating amount of evidence suggests that the white matter hyperintensities on T 2 weighted brain magnetic resonance imaging predict an increased risk of dementia and gait disturbance. This state has been proposed as cerebral small vessel disease, including leukoaraiosis, Binswanger's disease, lacunar stroke and cerebral microbleeds. However, the concept of cerebral small vessel disease is still obscure. To understand the cerebral small vessel disease, the precise structure and function of cerebral small vessels must be clarified. Cerebral small vessels include several different arteries which have different anatomical structures and functions. Important functions of the cerebral small vessels are blood-brain barrier and perivasucular drainage of interstitial fluid from the brain parenchyma. Cerebral capillaries and glial endfeet, take an important role for these functions. However, the previous pathological investigations on cerebral small vessels have focused on larger arteries than capillaries. Therefore little is known about the pathology of capillaries in small vessel disease. The recent discoveries of genes which cause the cerebral small vessel disease indicate that the cerebral small vessel diseases are caused by a distinct molecular mechanism. One of the pathological findings in hereditary cerebral small vessel disease is the loss of smooth muscle cells, which is an also well-recognized finding in sporadic cerebral small vessel disease. Since pericytes have similar character with the smooth muscle cells, the pericytes should be investigated in these disorders. In addition, the loss of smooth muscle cells may result in dysfunction of drainage of interstitial fluid from capillaries. The precise correlation between the loss of smooth muscle cells and white matter disease is still unknown. However, the function that is specific to cerebral small vessel may be associated with the pathogenesis of cerebral small vessel disease. (author)

  18. Overall comparative analysis of management and outcomes of cardiac cases reported on board merchant ships.

    Science.gov (United States)

    Apostolatos, Charalampos; Andria, Vivian; Licari, Julie

    Telemedical assistance has always been the cornerstone of medical care on board. Significant technological progress has provided improved scientific tools and equipment for high-quality communication and prompt management of either minor incidents or major emergencies on board. Med Solutions International is a medical management company, offering services exclusively to the maritime industry. Registered vessels contact the medical team and healthcare professionals provide immediate guidelines for onboard management as well as necessary action thereafter, i.e. examination ashore or urgent medical evacuation. Since cardiac conditions or diseases are potentially the most dangerous when traveling at sea, it is of major importance to analyse and evaluate the overall management and outcomes of cases reporting symptoms of possible heart disease so as to improve telemedical assistance services in future. The study included cases reporting cardiac symptoms from 5 major shipping companies during the year 2016. Data was collected from telecommunication, emails and seafarers' final medical reports. A descriptive analysis of overall management and outcomes was performed. The study showed that the number of confirmed cardiovascular cases on board was very low. Among 551 total cases and 44 cases with reported cardiac symptoms there was only one heart attack, one pulmonary oedema and one suspected myocarditis. In the majority of cases, chest pain was musculoskeletal or due to respiratory infection. Symptoms resulting from issues such as stress or anxiety often present as potential cardiac conditions. Stress may also amplify the severity of symptoms. Language barriers between the seafarer, the master and the doctor often make communication very difficult. According to our findings there are grounds to intensify the prevention process through more efficient pre-employment medical examinations and improve management on board through more intensive training. Communication problems

  19. Progress of ITER vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Ioki, K., E-mail: Kimihiro.Ioki@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Bayon, A. [F4E, c/ Josep Pla, No. 2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Kim, B.C. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Kuzmin, E. [NTC “Sintez”, Efremov Inst., 189631 Metallostroy, St. Petersburg (Russian Federation); Le Barbier, R.; Martinez, J.-M. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Pathak, H. [ITER-India, A-29, GIDC Electronic Estate, Sector 25, Gandhinagar 382025 (India); Preble, J. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Sa, J.W. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Terasawa, A.; Utin, Yu. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); and others

    2013-10-15

    Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure.

  20. Progress of ITER vacuum vessel

    International Nuclear Information System (INIS)

    Ioki, K.; Bayon, A.; Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B.; Kim, B.C.; Kuzmin, E.; Le Barbier, R.; Martinez, J.-M.; Pathak, H.; Preble, J.; Sa, J.W.; Terasawa, A.; Utin, Yu.

    2013-01-01

    Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure

  1. Reactor pressure vessel vented head

    Science.gov (United States)

    Sawabe, James K.

    1994-01-11

    A head for closing a nuclear reactor pressure vessel shell includes an arcuate dome having an integral head flange which includes a mating surface for sealingly mating with the shell upon assembly therewith. The head flange includes an internal passage extending therethrough with a first port being disposed on the head mating surface. A vent line includes a proximal end disposed in flow communication with the head internal passage, and a distal end disposed in flow communication with the inside of the dome for channeling a fluid therethrough. The vent line is fixedly joined to the dome and is carried therewith when the head is assembled to and disassembled from the shell.

  2. The Heart and Great Vessels

    Science.gov (United States)

    Onwuka, Ekene; King, Nakesha; Heuer, Eric; Breuer, Christopher

    2018-01-01

    Cardiovascular disease is the leading cause of mortality worldwide. We have made large strides over the past few decades in management, but definitive therapeutic options to address this health-care burden are still limited. Given the ever-increasing need, much effort has been spent creating engineered tissue to replaced diseased tissue. This article gives a general overview of this work as it pertains to the development of great vessels, myocardium, and heart valves. In each area, we focus on currently studied methods, limitations, and areas for future study. PMID:28289246

  3. Working conditions in the engine department - A qualitative study among engine room personnel on board Swedish merchant ships.

    Science.gov (United States)

    Lundh, Monica; Lützhöft, Margareta; Rydstedt, Leif; Dahlman, Joakim

    2011-01-01

    The specific problems associated with the work on board within the merchant fleet are well known and have over the years been a topic of discussion. The work conditions in the engine room (ER) are demanding due to, e.g. the thermal climate, noise and awkward working postures. The work in the engine control room (ECR) has over recent years undergone major changes, mainly due to the introduction of computers on board. In order to capture the impact these changes had implied, and also to investigate how the work situation has developed, a total of 20 engine officers and engine ratings were interviewed. The interviews were semi-structured and Grounded Theory was used for the data analysis. The aim of the present study was to describe how the engine crew perceive their work situation and working environment on board. Further, the aim was to identify areas for improvements which the engine crew consider especially important for a safe and effective work environment. The result of the study shows that the design of the ECR and ER is crucial for how different tasks are performed. Design which does not support operational procedures and how tasks are performed risk inducing inappropriate behaviour as the crew members' are compelled to find alternative ways to perform their tasks in order to get the job done. These types of behaviour can induce an increased risk of exposure to hazardous substances and the engine crew members becoming injured. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  4. A Cost Benefit Analysis Approach to Identify Improvements in Merchant Navy Deck Officers’ HELM (Human Element Leadership and Management Training

    Directory of Open Access Journals (Sweden)

    Farhan Saeed

    2016-12-01

    Full Text Available A review of maritime accidents conducted over the last decade confirms that human error is the main contributing factor in these incidents. Well-developed Non-Technical Skills (NTS can reduce the effects of human error. NTS include both interpersonal and cognitive skills such as situation awareness, teamwork, decision-making, leadership, managerial skills, communication and language skills. In a crisis situation good NTS allow a deck officer to recognise the problem quickly, take action to manage the situation, and utilise the available team members safely and effectively. This paper identifies the importance of NTS training for merchant navy deck officers. It also highlights room for improvement in the existing HELM training. Research has shown that at present the structure of HELM training is not very effective. The other safety critical domains’ efforts into NTS developments are investigated and examples of best practice are adapted into the maritime domain’s NTS training. Suggestions are given for improvements to the HELM course based on proven successful methods in other safety critical domains (aviation and anaesthesia. A subsequent Cost Benefit Analysis for improving deck officers’ NTS is also carried out through the use of Bayesian Networks and Decision Tree Modelling.

  5. Social Perception of Infertility and Its Treatment in Late Medieval Italy: Margherita Datini, an Italian Merchant's Wife.

    Science.gov (United States)

    Nam, Jong Kuk

    2016-12-01

    Because the perception of infertility in medieval Europe ranged from the extremely religious view of it as a malediction of God or the devil's work, to the reasonable medical conception of it as a sort of disease to treat, it is very difficult to determine the general attitudes of ordinary people towards infertility. This article seeks to elucidate the common social perception of infertility and its treatment in late medieval Europe by analyzing the case of Margherita Datini, an Italian merchant's wife who lived in the 1400s. It relies heavily on the documents left by her and her husband, Francesco Datini; the couple left many records, including letters of correspondence between them. Margherita and those around her regarded infertility not as the devil's curse or a punishment by God but as a disease that can be cured. Margherita and her husband, Francesco, tried hard to cure their infertility. They received treatment and prescriptions from several doctors while also relying on folk remedies, religious therapies, and even magical remedies. The comparative analysis of Datini documents, medical books, and theoretical treatises or prescriptive essays by clerics suggests that the general perception of infertility in medieval Europe was located between the extremely religious and modern medical conceptions of it.

  6. [Detection of stool antigens of Echinococcus granulosus in dogs belonging to slaughterhouse workers and offal merchants in Metropolitan Lima].

    Science.gov (United States)

    Merino, Veronika; Falcón, Néstor; Morel, Noelia; González, Gualberto

    2017-04-20

    To demonstrate the presence of Echinoccocus granulosus in the definitive host in the city of Lima, Perú, by detecting parasite antigens in the stool of dogs belonging to offal handlers and merchants in authorized slaughterhouses in Metropolitan Lima. Stool samples were collected from 58 dogs and examined using the coproELISA technique for the detection of secretory/excretory antigens of E. granulosus. A survey was conducted to obtain information on pet feeding and handling practices. Positivity to E. granulosus was detected in 13.8% (8/58) of the dogs. In 27.8% (5/18) of the homes, at least one animal showed positivity, and in families that had more than four dogs the chances of finding positivity in at least one dog were higher (P dog tested positive the pets were fed on offal. Of study participants, 94.4% (17) knew nothing about the routes of transmission of hydatid disease. Results show the presence of definitive hosts in the urban area of Lima and underscore the need to more widely disseminate practices for the prevention of parasite transmission.

  7. Submerged demineralizer system vessel shipment report

    International Nuclear Information System (INIS)

    Quinn, G.J.; Henrie, J.O.; Greenborg, J.

    1984-06-01

    Vessels containing zeolites and absorbed fission products from processing accident-generated water at Three Mile Island through the Submerged Demineralizer System were found to generate radiolytic hydrogen and oxygen gases. In some vessels with high curie contents, gas generation during shipment could have resulted in flammable gas concentrations exceeding federal limits for radioactive material shipments. Tests of a catalyst bed in the vessel demonstrated that recombination of the gases back into water would permit safe shipment of the sealed vessels. Catalyst was loaded into an available screen assembly in each vessel. Vessel pressure monitoring ensured that net gas generation had stopped and that hydrogen and oxygen concentrations were kept below flammable limits. All shipments complied with federal regulations

  8. Exponential Stabilization of an Underactuated Surface Vessel

    Directory of Open Access Journals (Sweden)

    Kristin Y. Pettersen

    1997-07-01

    Full Text Available The paper shows that a large class of underactuated vehicles cannot be asymptotically stabilized by either continuous or discontinuous state feedback. Furthermore, stabilization of an underactuated surface vessel is considered. Controllability properties of the surface vessels is presented, and a continuous periodic time-varying feedback law is proposed. It is shown that this feedback law exponentially stabilizes the surface vessel to the origin, and this is illustrated by simulations.

  9. Computerized reactor pressure vessel materials information system

    International Nuclear Information System (INIS)

    Strosnider, J.; Monserrate, C.; Kenworthy, L.D.; Tether, C.D.

    1980-10-01

    A computerized information system for storage and retrieval of reactor pressure vessel materials data was established, as part of Task Action Plan A-11, Reactor Vessel Materials Toughness. Data stored in the system are necessary for evaluating the resistance of reactor pressure vessels to flaw-induced fracture. This report includes (1) a description of the information system; (2) guidance on accessing the system; and (3) a user's manual for the system

  10. Underwater robot system for reactor vessel

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young Soo; Kim, Tae Won; Lee, Sung Uk; Jeong, Kyung Min [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    It is dangerous to work inside reactor vessel because of high radioactivity. So robot system is necessary to work inside reactor vessel instead of workers. And robot also has advantage of mobility over conventional equipment which has limitation of the range of accessibility. In this paper, we describe design consideration and criteria of robot system for reactor vessel, and component of developed system. Reliability, usability and convenience of robot system were considered to design and fabrication.

  11. Underwater robot system for reactor vessel

    International Nuclear Information System (INIS)

    Choi, Young Soo; Kim, Tae Won; Lee, Sung Uk; Jeong, Kyung Min

    2012-01-01

    It is dangerous to work inside reactor vessel because of high radioactivity. So robot system is necessary to work inside reactor vessel instead of workers. And robot also has advantage of mobility over conventional equipment which has limitation of the range of accessibility. In this paper, we describe design consideration and criteria of robot system for reactor vessel, and component of developed system. Reliability, usability and convenience of robot system were considered to design and fabrication

  12. How to replace a reactor pressure vessel

    International Nuclear Information System (INIS)

    Huber, R.

    1996-01-01

    A potential life extending procedure for a nuclear reactor after, say, 40 years of service life, might in some circumstances be the replacement of the reactor pressure vessel. Neutron induced degradation of the vessel might make replacement by one of a different material composition desirable, for example. Although the replacement of heavy components, such as steam generators, has been possible for many years, the pressure vessel presents a much more demanding task if only because it is highly irradiated. Some preliminary feasibility studies by Siemens are reported for the two removal strategies that might be considered. These are removal of the entire pressure vessel in one piece and dismantling it into sections. (UK)

  13. Safety vessels for explosive fusion reactor

    International Nuclear Information System (INIS)

    Mineev, V.

    1994-01-01

    The failure of several types of geometrically similar cylindrical and spherical steel and glass fibers vessels filled with water or air was investigated when an explosive charge of TNT was detonated in the center. Vessels had radius 50-1000 mm, thickness of walls 2-20%. The detonation on TNT imitated energy release. The parameter: K = M/mf is a measure of the strength of the vessel where M is the mass of the vessel, and mf is the mass of TNT for which the vessel fails. This demanded 2-4 destroyed and nondestroyed shots. It may be showed that: K=A/σ f where σ f is the fracture stress of the material vessel, and A = const = F(energy TNT, characteristic of elasticity of vessel material). The chief results are the following: (1) A similar increase in the geometrical dimensions of steel vessels by a factor of 10 leads to the increase of parameter K in about 5 times and to decrease of failure deformation in 7 times (scale effect). (2) For glass fibers, scale effect is absent. (3) This problem is solved in terms of theory energetic scale effect. (4) The concept of TNT equivalent explosive makes it possible to use these investigations to evaluate the response of safety vessels for explosive fusion reactor

  14. Detection of blood vessels on coronary cineangiograms

    International Nuclear Information System (INIS)

    Yanagihara, Yosio; Sugahara, Tetsuo; Uyama, Chikao

    1988-01-01

    To determine the most suitable filter for measuring blood vessel width on a coronary cineagiogram, several sizes of vessel phantoms were taken under different energies and contrast substance densities on cine film and the vessel widths were calculated by using several edge detection filters. Among the filters, the entropy and Gaussian filters were found to be twice as accurate as the derivative filters. The entropy filter was applied to one frame of a coronary angiogram, and the detected vessel edges were as accurate as the determined by a radiologist. This filter can be applied to coronary cineangiograms, including stenosed sites. (author)

  15. Stabilizer for reactor pressure vessel

    International Nuclear Information System (INIS)

    Nakajima, Masataka.

    1991-01-01

    A plurality of flush springs and sleeves are disposed to a rod to be screw-coupled to a yoke disposed between gusset side walls. A vibration energy dissipation mechanism due to resiliently plastic deformation of metal is disposed between the gusset side wall and the sleeve of the rod. When earthquakes should occur and the distance between the gusset side wall and the sleeve is changed undergoing seismic input, the vibration energy is dissipated by the resilient plastic deformation of the vibration energy dissipation mechanism. The seismic response of the pressure vessel system is thus decreased to improve seismic resistivity. The reactor safety and reliability can be ensured. It is not necessary to strengthen supports for pipeline systems, and increase of the cost, including design and manufacture, can be avoided while giving no effects on the layout for the upper portion of reactor shielding walls. (N.H.)

  16. Grounding Damage to Conventional Vessels

    DEFF Research Database (Denmark)

    Lützen, Marie; Simonsen, Bo Cerup

    2003-01-01

    The present paper is concerned with rational design of conventional vessels with regard to bottom damage generated in grounding accidents. The aim of the work described here is to improve the design basis, primarily through analysis of new statistical data for grounding damage. The current...... regulations for design of bottom compartment layout with regard to grounding damages are largely based on statistical damage data. New and updated damage statistics holding 930 grounding accident records has been investigated. The bottom damage statistics is compared to current regulations for the bottom...... compartment layout, in an attempt to determine the probability of exceeding the design requirements. Distributions for the extent of damage, such as damage length, height and width, are determined. Furthermore, attempts are made at identifying the governing grounding scenarios and deriving a formula...

  17. Inspection technology of Korean standard Reactor vessel

    International Nuclear Information System (INIS)

    Doh, Euisoon

    2002-01-01

    This paper is for the inspection technology of Korean standard Reactor vessel. KPS performed Korean standard Reactor vessel inspection for a part of Yonggwang unit 5 and full inspection of Yonggwang unit 6 on November in 2001. Korean standard Reactor vessel is different from Westinghouse and Framatome plants in design and material. Understanding design, structure and material is very important to prepare and to perform Reactor vessel inspection. Korean standard Reactor vessel has 6 Stabilizer lugs, 6 Core stop lugs and one Flow Baffle around Lower head to Bottom head weld(G4). They make very difficult to perform scanning of G4 by transducers and to install Lower Platform of robot system. Korean standard Reactor vessel has 2 Outlet Nozzles, 4 Inlet Nozzles and small curvature of Inner Radius regions. That small curvature's Inner Radius region needs a special technology to perform the area more than 90% of whole examination volume. The most significant difference of Korean standard Reactor vessel is that it does not have Safe End region because both of Reactor vessel and main reactor coolant system piping are carbon steel. Therefore, the technology for this nozzle to piping weld is very unique to be compared with other Westinghouse or Framatome plants. Described above, the inspection technology of Korean standard Reactor Vessel is very different from other Reactor Vessel due to different internal structure and material. The company which performs this 10 years ISI in future will need much investigation of structure and material to succeed in Reactor vessel inspection of Korean standard plant

  18. Total Stem and Merchantable Volume Equations of Norway Spruce (Picea abies (L. Karst. Growing on Former Farmland in Sweden

    Directory of Open Access Journals (Sweden)

    Tord Johansson

    2014-08-01

    Full Text Available An equation was constructed to estimate the stem volume of Norway spruce (Picea abies (L. Karst. in 145 stands growing on former farmland in Sweden (Latitude 56–63° N. The mean total age was 40 ± 13 (range 17–91 years, the mean diameter at breast height (ob was 15 ± 4 (range 5–27 cm and the mean density was 1621 ± 902 (range 100–7600 stems ha−1. The equation which fits the data best used the diameter at breast height and total stem height as predictive variables. Merchantable volume equations for the estimation of commercial volume for any top diameter and bole length were developed. Soil types in the stands were sediments (coarse sand, fine sand and silt and heavy, medium and light clay, tills (sandy, fine sandy and silty and peat. The standing volume was calculated; the mean was 253 ± 103 (range 26–507 m3 ha−1 with a MAI (mean annual increment of 6.9±3.5 (range 1.3–16.7 m3 ha−1 year−1. There were statistically significant differences between MAI and coarse sand, sand and silt, light clay, peat and silty till soils. Spruce stands growing on silty tills had the lowest MAI (4.94 ± 2.27 m3 ha−1 year−1 and light clay, fine sand and silt and peat the highest (7.62 ± 4.24, 7.46 ± 3.33 and 8.67 ± 2.83 m3 ha−1 year−1.

  19. Vessel classification method based on vessel behavior in the port of Rotterdam

    NARCIS (Netherlands)

    Zhou, Y.; Daamen, W.; Vellinga, T.; Hoogendoorn, S.P.

    2015-01-01

    AIS (Automatic Identification System) data have proven to be a valuable source to investigate vessel behavior. The analysis of AIS data provides a possibility to recognize vessel behavior patterns in a waterway area. Furthermore, AIS data can be used to classify vessel behavior into several

  20. 78 FR 77430 - Proposed Information Collection; Comment Request; Foreign Fishing Vessel Permits, Vessel, and...

    Science.gov (United States)

    2013-12-23

    ... fishery or joint venture operation, transship fish harvested by a U.S. vessel to a location outside the U... fishing vessels that participate in a directed fishery or a joint venture operation. In particular these... fishing, participation in joint ventures with U.S. vessels, or transshipments of fish or fish products...

  1. Improvements in or relating to vessels

    International Nuclear Information System (INIS)

    Williams, D.T.; Clarke, M.A.

    1977-01-01

    A reactor containment vessel is described that is suitable for a boiling water reactor, a high temperature reactor, or a liquid metal or gas cooled fast breeder reactor. Such vessels are required to contain fluids under high pressure, say in the range of 400 to 12,000 lb/sq.in. Full constructional details are given. (U.K.)

  2. Analyzing Vessel Behavior Using Process Mining

    NARCIS (Netherlands)

    Maggi, F.M.; Mooij, A.J.; Aalst, W.M.P. van der

    2013-01-01

    In the maritime domain, electronic sensors such as AIS receivers and radars collect large amounts of data about the vessels in a certain geographical area. We investigate the use of process mining techniques for analyzing the behavior of the vessels based on these data. In the context of maritime

  3. Fabrication of Separator Demonstration Facility process vessel

    International Nuclear Information System (INIS)

    Oberst, E.F.

    1985-01-01

    The process vessel system is the central element in the Separator Development Facility (SDF). It houses the two major process components, i.e., the laser-beam folding optics and the separators pods. This major subsystem is the critical-path procurement for the SDF project. Details of the vaious parts of the process vessel are given

  4. 33 CFR 401.67 - Explosive vessels.

    Science.gov (United States)

    2010-07-01

    ... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Dangerous Cargo § 401.67 Explosive vessels. A vessel carrying explosives, either Government or commercial, as defined in the Dangerous Cargo Act of the United States and in the International Maritime Dangerous Goods Code, Class 1, Divisions 1.1 to 1.5 inclusive...

  5. 50 CFR 300.32 - Vessel licenses.

    Science.gov (United States)

    2010-10-01

    ... Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED ACTIVITIES INTERNATIONAL FISHERIES REGULATIONS... Port Moresby, Papua New Guinea, who, on behalf of the license holder, will receive and respond to any... vessels of the United States engaged in joint venture arrangements, specifically: Vessels engaged in...

  6. Nuclear reactor vessel fuel thermal insulating barrier

    Energy Technology Data Exchange (ETDEWEB)

    Keegan, C. Patrick; Scobel, James H.; Wright, Richard F.

    2013-03-19

    The reactor vessel of a nuclear reactor installation which is suspended from the cold leg nozzles in a reactor cavity is provided with a lower thermal insulating barrier spaced from the reactor vessel that has a hemispherical lower section that increases in volume from the center line of the reactor to the outer extent of the diameter of the thermal insulating barrier and smoothly transitions up the side walls of the vessel. The space between the thermal insulating harrier and the reactor vessel forms a chamber which can be flooded with cooling water through passive valving to directly cool the reactor vessel in the event of a severe accident. The passive inlet valve for the cooling water includes a buoyant door that is normally maintained sealed under its own weight and floats open when the cavity is Hooded. Passively opening steam vents are also provided.

  7. Method of burying vessel containing radioactive waste

    International Nuclear Information System (INIS)

    Koga, Yoshihito.

    1989-01-01

    A float having an inert gas sealed therein is attached to a tightly closed vessel containing radioactive wastes. The vessel is inserted and kept in a small hole for burying the tightly closed vessel in an excavated shaft in rocks such as of granite or rock salts, while filling bentonite as shielding material therearound. In this case, the float is so adjusted that the apparent specific gravity is made equal or nearer between the tightly closed vessel and the bentonite, so that the rightly closed vessel does not sink and cause direct contact with the rocks even if bentonite flows due to earthquakes, etc. This can prevent radioactivity contamination through water in the rocks. (S.K.)

  8. Lightweight bladder lined pressure vessels

    Science.gov (United States)

    Mitlitsky, Fred; Myers, Blake; Magnotta, Frank

    1998-01-01

    A lightweight, low permeability liner for graphite epoxy composite compressed gas storage vessels. The liner is composed of polymers that may or may not be coated with a thin layer of a low permeability material, such as silver, gold, or aluminum, deposited on a thin polymeric layer or substrate which is formed into a closed bladder using torispherical or near torispherical end caps, with or without bosses therein, about which a high strength to weight material, such as graphite epoxy composite shell, is formed to withstand the storage pressure forces. The polymeric substrate may be laminated on one or both sides with additional layers of polymeric film. The liner may be formed to a desired configuration using a dissolvable mandrel or by inflation techniques and the edges of the film seamed by heat sealing. The liner may be utilized in most any type of gas storage system, and is particularly applicable for hydrogen, gas mixtures, and oxygen used for vehicles, fuel cells or regenerative fuel cell applications, high altitude solar powered aircraft, hybrid energy storage/propulsion systems, and lunar/Mars space applications, and other applications requiring high cycle life.

  9. Integrity of the reactor vessel support system for a postulated reactor vessel closure head drop event

    International Nuclear Information System (INIS)

    Kim, Tae Wan; Lee, Ki Young; Lee, Dae Hee; Kim, Kang Soo

    1996-01-01

    The integrity of reactor vessel support system of the Korean Standard Nuclear Power Plant (KSNPP) is investigated for a postulated reactor vessel closure head drop event. The closure head is disassembled from the reactor vessel during refueling process or general inspection of reactor vessel and internal structures, and carried to proposed location by the head lift rig. A postulated closure head drop event could be anticipated during closure head handling process. The drop event may cause an impact load on the reactor vessel and supporting system. The integrity of the supporting system is directly relevant to that of reactor vessel and reactor internals including fuels. Results derived by elastic impact analysis, linear and non-linear buckling analysis and elasto-plastic stress analysis of the supporting system implied that the integrity of the reactor vessel supporting system is intact for a postulated reactor closure head drop event. 9 refs., 10 figs., 3 tabs. (author)

  10. 78 FR 40891 - Revisions to the Export Administration Regulations: Military Vehicles; Vessels of War...

    Science.gov (United States)

    2013-07-08

    ... Vehicles; Vessels of War; Submersible Vessels, Oceanographic Equipment; Related Items; and Auxiliary and... Regulations: Military Vehicles; Vessels of War; Submersible Vessels, Oceanographic Equipment; Related Items... military vehicles and related items; vessels of war and related items; submersible vessels, oceanographic...

  11. Design of the ITER vacuum vessel

    International Nuclear Information System (INIS)

    Ioki, K.; Johnson, G.; Shimizu, K.; Williamson, D.

    1995-01-01

    The ITER vacuum vessel is a major safety barrier and must support electromagnetic loads during plasma disruptions and vertical displacement events (VDE) and withstand plausible accidents without losing confinement.The vacuum vessel has a double wall structure to provide structural and electrical continuity in the toroidal direction. The inner and outer shells and poloidal stiffening ribs between them are joined by welding, which gives the vessel the required mechanical strength. The space between the shells will be filled with steel balls and plate inserts to provide additional nuclear shielding. Water flowing in this space is required to remove nuclear heat deposition, which is 0.2-2.5% of the total fusion power. The minor and major radii of the tokamak are 3.9 m and 13 m respectively, and the overall height is 15 m. The total thickness of the vessel wall structure is 0.4-0.7 m.The inboard and outboard blanket segments are supported from the vacuum vessel. The support structure is required to withstand a large total vertical force of 200-300 MN due to VDE and to allow for differential thermal expansion.The first candidate for the vacuum vessel material is Inconel 625, due to its higher electric resistivity and higher yield strength, even at high temperatures. Type 316 stainless steel is also considered a vacuum vessel material candidate, owing to its large database and because it is supported by more conventional fabrication technology. (orig.)

  12. Composite Overwrapped Pressure Vessels, A Primer

    Science.gov (United States)

    McLaughlan, Pat B.; Forth, Scott C.; Grimes-Ledesma, Lorie R.

    2011-01-01

    Due to the extensive amount of detailed information that has been published on composite overwrapped pressure vessels (COPVs), this document has been written to serve as a primer for those who desire an elementary knowledge of COPVs and the factors affecting composite safety. In this application, the word "composite" simply refers to a matrix of continuous fibers contained within a resin and wrapped over a pressure barrier to form a vessel for gas or liquid containment. COPVs are currently used at NASA to contain high pressure fluids in propulsion, science experiments, and life support applications. They have a significant weight advantage over all metal vessels but require unique design, manufacturing, and test requirements. COPVs also involve a much more complex mechanical understanding due to the interplay between the composite overwrap and the inner liner. A metallic liner is typically used in a COPV as a fluid permeation barrier. The liner design concepts and requirements have been borrowed from all-metal vessels. However, application of metallic vessel design standards to a very thin liner is not straightforward. Different failure modes exist for COPVs than for all-metal vessels, and understanding of these failure modes is at a much more rudimentary level than for metal vessels.

  13. Recent Advancements in Retinal Vessel Segmentation.

    Science.gov (United States)

    L Srinidhi, Chetan; Aparna, P; Rajan, Jeny

    2017-04-01

    Retinal vessel segmentation is a key step towards the accurate visualization, diagnosis, early treatment and surgery planning of ocular diseases. For the last two decades, a tremendous amount of research has been dedicated in developing automated methods for segmentation of blood vessels from retinal fundus images. Despite the fact, segmentation of retinal vessels still remains a challenging task due to the presence of abnormalities, varying size and shape of the vessels, non-uniform illumination and anatomical variability between subjects. In this paper, we carry out a systematic review of the most recent advancements in retinal vessel segmentation methods published in last five years. The objectives of this study are as follows: first, we discuss the most crucial preprocessing steps that are involved in accurate segmentation of vessels. Second, we review most recent state-of-the-art retinal vessel segmentation techniques which are classified into different categories based on their main principle. Third, we quantitatively analyse these methods in terms of its sensitivity, specificity, accuracy, area under the curve and discuss newly introduced performance metrics in current literature. Fourth, we discuss the advantages and limitations of the existing segmentation techniques. Finally, we provide an insight into active problems and possible future directions towards building successful computer-aided diagnostic system.

  14. Vessel Sewage Discharges: Statutes, Regulations, and Related Laws and Treaties

    Science.gov (United States)

    Vessel sewage discharges can be regulated under multiple statutes, regulations, and laws/treaties, including the Clean Water Act, Title XIV, MARPOL Annex IV and the Vessel General Permit. This page describes how these are applied to vessel sewage.

  15. 49 CFR 176.5 - Application to vessels.

    Science.gov (United States)

    2010-10-01

    ... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying..., icebreaker, pile driver, pilot boat, welding vessel, salvage vessel, or wrecking vessel; or (8) A foreign...

  16. Structural Analysis of the NCSX Vacuum Vessel

    International Nuclear Information System (INIS)

    Fred Dahlgren; Art Brooks; Paul Goranson; Mike Cole; Peter Titus

    2004-01-01

    The NCSX (National Compact Stellarator Experiment) vacuum vessel has a rather unique shape being very closely coupled topologically to the three-fold stellarator symmetry of the plasma it contains. This shape does not permit the use of the common forms of pressure vessel analysis and necessitates the reliance on finite element analysis. The current paper describes the NCSX vacuum vessel stress analysis including external pressure, thermal, and electro-magnetic loading from internal plasma disruptions and bakeout temperatures of up to 400 degrees centigrade. Buckling and dynamic loading conditions are also considered

  17. A study of reactor vessel integrity assessment

    International Nuclear Information System (INIS)

    Lee, Jae Hoon; Kim, Jong Kyung; Shin, Chang Ho; Seo, Bo Kyun

    1999-02-01

    The fast neutron fluence at the Reactor Pressure Vessel(RPV) of KNGR designed for 60 years lifetime was calculated by full-scope Monte Carlo simulation for reactor vessel integrity assessment. KNGR core geometry was modeled on a three-dimensional representation of the one-sixteenth of the reactor in-vessel component. Each fuel assemblies were modeled explicitly, and each fuel pins were axially divided into 5 segments. The maximum flux of 4.3 x 10 10 neutrons/cm 2 . sec at the RPV was obtained by tallying neutrons crossing the beltline of inner surface of the RPV

  18. THE ECONOMIC ACTIVITIES OF A GLOBAL MERCHANT -BANKER IN CHILE: HUTH & CO. OF LONDON, 1820S-1850S

    Directory of Open Access Journals (Sweden)

    MANUEL LLORCA-JAÑA

    2012-12-01

    Full Text Available This article deals with Huth & Co.'s activities in Chile during the 1820s-1850s. Huth was the only London merchant-banker that decided to go global before 1850, and also the only one to open a branch in Chile. The analysis of how his branches operated should take this into account, yet Huth's activities in Chile have only previously been examined using a bilateral approach to examine the economic relations between Chile and Britain. This situation was mainly due to the fact that the richest collection of primary material on Huth & Co. (the Huth papers at University College London had been ignored by scholars working on Anglo-Chilean economic relations during the first half of the nineteenth-century. The main focus of this paper is on the information that we were made unaware of due to this restricted investigative approach. Among them are the connections established between Huth's branches in Chile and the USA, Asia, continental Europe and the rest of Latin America; and the important trade in Spanish quicksilver.El presente artículo trata sobre las actividades económicas en Chile de Huth & Co. durante el período 1820-1850. Huth & Co. fue el único mercader banquero de Londres que decidió tener una empresa global antes de 1850 y el único también en abrir una oficina en Chile. Por lo tanto, las actividades de la sucursal en Chile deben ser analizadas considerando estos dos importantes hechos. Sin embargo, antes de este estudio, las actividades de Huth en el país fueron examinadas usando un enfoque estrictamente bilateral de las relaciones entre Chile y Gran Bretaña. Esta visión restrictiva se debió en gran parte al desconocimiento de los historiadores interesados en las relaciones anglo-chilenas de una importante fuente de información: los archivos de Huth disponibles en el University College London. Debido a este desconocimiento, la historiografía no ha dado cuenta de importantes hechos tratado en este artículo. Por ejemplo, de las

  19. Simulation of In-Vessel Corium Retention through External Reactor Vessel Cooling for SMART using SIMPLE

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Jin-Sung; Son, Donggun; Park, Rae-Joon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Thermal load analysis from the corium pool to the outer reactor vessel in the lower plenum of the reactor vessel is necessary to evaluate the effect of the IVR-ERVC during a severe accident for SMART. A computational code called SIMPLE (Sever Invessel Melt Progression in Lower plenum Environment) has been developed for analyze transient behavior of molten corium in the lower plenum, interaction between corium and coolant, and heat-up and ablation of reactor vessel wall. In this study, heat load analysis of the reactor vessel for SMART has been conducted using the SIMPLE. Transient behavior of the molten corium in the lower plenum and IVR-ERVC for SMART has been simulated using SIMPLE. Heat flux from the corium pool to the outer reactor vessel is concentrated in metallic layer by the focusing effect. As a result, metallic layer shows higher temperature than the oxidic layer. Also, vessel wall of metallic layer has been ablated by the high in-vessel temperature. Ex-vessel temperature of the metallic layer was maintained 390 K and vessel thickness was maintained 14 cm. It means that the reactor vessel integrity is maintained by the IVR-ERVC.

  20. Design of Saddle Support for Horizontal Pressure Vessel

    OpenAIRE

    Vinod Kumar; Navin Kumar; Surjit Angra; Prince Sharma

    2014-01-01

    This paper presents the design analysis of saddle support of a horizontal pressure vessel. Since saddle have the vital role to support the pressure vessel and to maintain its stability, it should be designed in such a way that it can afford the vessel load and internal pressure of the vessel due to liquid contained in the vessel. A model of horizontal pressure vessel and saddle support is created in ANSYS. Stresses are calculated using mathematical approach and ANSYS soft...

  1. Wine vessels (Vasa vinaria in roman law

    Directory of Open Access Journals (Sweden)

    Aličić Samir

    2017-01-01

    Full Text Available The notion of 'wine vessels' in Roman law comprises all the winecontaining recipients. There is no legal standardization of wine vessels by means of volume, and although the terms amphora, urna and culleus are used to designate both the vessels and the units of measure, these are two different meanings of the terms. In regard of the question, whether the vessels make appurtenance of the wine, jurisprudents of proculean school divided them in two categories. In the first category are those that follow legal status of wine, usually amphoras and other jars (cadi which are used for 'packaging', i. e. 'bottling' of the wine. The second category make mostly vats (cuppae and ceramic cisterns (dolia, which don't follow legal status of wine, making instead part of farming equipment of a landed property (instrumentum fundi and it's appurtenance. But, the roman jurists are not consistent regarding criteria for distinguishing these two categories.

  2. Large Pelagic Logbook Trip Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

  3. Large Pelagic Logbook Set Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

  4. Device of supporting a vacuum plasma vessel

    International Nuclear Information System (INIS)

    Kanoi, Minoru; Hori, Yasuro.

    1980-01-01

    Purpose: To improve the earthquake-resistance of a vacuum plasma vessel by equalizing the natural vibrations of a vibrating system formed by supporting mechanisms of the respective sectors of the vessel. Constitution: The vacuum plasma vessel is constructed of bellows interposed among a plurality of thick sector-like rings and the rings, which are respectively supported by supporting mechanisms. Thus, the vibrating systems are divided into the rings interposed with the bellows, arms as the supporting mechanisms, and posts. The natural vibrations of these vibrating systems are equalized to each other by suitably adjusting the configurations and the sized of the arms and the posts or the weight or the like of the rings. Therefore, the respective rings become vibrated at the natural vibrations equal to each other so as to largely reduce the stresses produced at both ends of the bellows. Accordingly, it can remarkably improve the earthquake-resistance of the entire plasma vessel. (Sekiya, K.)

  5. 50 CFR 600.501 - Vessel permits.

    Science.gov (United States)

    2010-10-01

    ... the permit application form. (3) Applicants for FFV's that will support U.S. vessels in joint ventures.... Failure to report a change in the ownership from that described in the current application within the...

  6. Qualification of anticorrosive coatings in nuclear vessels

    International Nuclear Information System (INIS)

    Perez Flores, C.

    1985-01-01

    Test qualifications of the behavior of anticorrosive coating systems used in nuclear vessels in service and under the accident conditions of radiation decontamination, steam chemical resistance, thermal conductivity, weathering accelerated aging are presented and discussed. (author)

  7. Pressure vessel for a BWR type reactor

    International Nuclear Information System (INIS)

    Shimamoto, Yoshiharu.

    1980-01-01

    Purpose: To prevent the retention of low temperature water and also prevent the thermal fatigue of the pressure vessel by making large the curvature radius of a pressure vessel of a feed water sparger fitting portion and accelerating the mixing of low-temperature water at the feed water sparger base and in-pile hot water. Constitution: The curvature radius of the corner of the feed water sparger fitting portion in a pressure vessel is formed largely. In-pile circulating water infiltrates up to the base portion of the feed water sparger to carry outside low-temperature water at the base part, which is mixed with in-pile hot water. Accordingly, low temperature water does not stay at the base portion of the feed water sparger and generation of thermal fatigue in the pressure vessel can be prevented and the safety of the BWR type reactor can be improved. (Yoshino, Y.)

  8. 2013 Gulf of Mexico Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  9. 2011 Gulf of Mexico Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  10. Advanced toroidal facility vaccuum vessel stress analyses

    International Nuclear Information System (INIS)

    Hammonds, C.J.; Mayhall, J.A.

    1987-01-01

    The complex geometry of the Advance Toroidal Facility (ATF) vacuum vessel required special analysis techniques in investigating the structural behavior of the design. The response of a large-scale finite element model was found for transportation and operational loading. Several computer codes and systems, including the National Magnetic Fusion Energy Computer Center Cray machines, were implemented in accomplishing these analyses. The work combined complex methods that taxed the limits of both the codes and the computer systems involved. Using MSC/NASTRAN cyclic-symmetry solutions permitted using only 1/12 of the vessel geometry to mathematically analyze the entire vessel. This allowed the greater detail and accuracy demanded by the complex geometry of the vessel. Critical buckling-pressure analyses were performed with the same model. The development, results, and problems encountered in performing these analyses are described. 5 refs., 3 figs

  11. Advanced Toroidal Facility vacuum vessel stress analyses

    International Nuclear Information System (INIS)

    Hammonds, C.J.; Mayhall, J.A.

    1987-01-01

    The complex geometry of the Advanced Toroidal Facility (ATF) vacuum vessel required special analysis techniques in investigating the structural behavior of the design. The response of a large-scale finite element model was found for transportation and operational loading. Several computer codes and systems, including the National Magnetic Fusion Energy Computer Center Cray machines, were implemented in accomplishing these analyses. The work combined complex methods that taxed the limits of both the codes and the computer systems involved. Using MSC/NASTRAN cyclic-symmetry solutions permitted using only 1/12 of the vessel geometry to mathematically analyze the entire vessel. This allowed the greater detail and accuracy demanded by the complex geometry of the vessel. Critical buckling-pressure analyses were performed with the same model. The development, results, and problems encountered in performing these analyses are described

  12. A case of small vessel vasculitis

    Directory of Open Access Journals (Sweden)

    Madhulika Mahashabde

    2014-01-01

    We are reporting a case of un-specified small vessel vasculitis, which was diagnosed on the basis of positive perinuclear anti neutrophil cytoplasmic antibodies (ANCA P MPO done by Enzyme Linked Immunosorbent Assay (ELISA.

  13. Ion transport membrane module and vessel system

    Energy Technology Data Exchange (ETDEWEB)

    Stein, VanEric Edward; Carolan, Michael Francis; Chen, Christopher M.; Armstrong, Phillip Andrew; Wahle, Harold W.; Ohrn, Theodore R.; Kneidel, Kurt E.; Rackers, Keith Gerard; Blake, James Erik; Nataraj, Shankar; van Doorn, Rene Hendrik Elias; Wilson, Merrill Anderson

    2007-02-20

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  14. Ion transport membrane module and vessel system

    Energy Technology Data Exchange (ETDEWEB)

    Stein, VanEric Edward [Allentown, PA; Carolan, Michael Francis [Allentown, PA; Chen, Christopher M [Allentown, PA; Armstrong, Phillip Andrew [Orefield, PA; Wahle, Harold W [North Canton, OH; Ohrn, Theodore R [Alliance, OH; Kneidel, Kurt E [Alliance, OH; Rackers, Keith Gerard [Louisville, OH; Blake, James Erik [Uniontown, OH; Nataraj, Shankar [Allentown, PA; Van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson [West Jordan, UT

    2012-02-14

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  15. Ion transport membrane module and vessel system

    Energy Technology Data Exchange (ETDEWEB)

    Stein, VanEric Edward [Allentown, PA; Carolan, Michael Francis [Allentown, PA; Chen, Christopher M [Allentown, PA; Armstrong, Phillip Andrew [Orefield, PA; Wahle, Harold W [North Canton, OH; Ohrn, Theodore R [Alliance, OH; Kneidel, Kurt E [Alliance, OH; Rackers, Keith Gerard [Louisville, OH; Blake, James Erik [Uniontown, OH; Nataraj, Shankar [Allentown, PA; van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson [West Jordan, UT

    2008-02-26

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  16. Subconjunctival Hemorrhage (Broken Blood Vessel in Eye)

    Science.gov (United States)

    Subconjunctival hemorrhage (broken blood vessel in eye) Overview A subconjunctival hemorrhage (sub-kun-JUNK-tih-vul HEM-uh-ruj) ... may not even realize you have a subconjunctival hemorrhage until you look in the mirror and notice ...

  17. MRA of fibromuscular dysplasia in cervical vessels

    International Nuclear Information System (INIS)

    Link, J.; Steffens, J.C.; Mueller-Huelsbeck, S.; Brossmann, J.; Heller, M.

    1996-01-01

    In 386 selective angiograms of cervical vessels fibromuscular dysplasia was revealed in 4 female patients in the age of 30-54 years. FMD was located in the carotid artery (n=5) and in the vertebral artery (n=2) with a total of 8 lesions. 6/8 of the lesions of the seven cervical vessels were located typically in the mid cervical portion of the vessels and 2/6 lesions were located in the atlas loop of the vertebral artery. 4 lesions showed moderate stenosis and 4 vessels showed only mild stenosis. These patterns which demonstrated the typical morphology of fibromuscular dysplasia with alternating irregular zones of widening and narrowing were evaluated well with MR angiography, the others were missed. (orig./MG) [de

  18. Vent structures in nuclear reactor vessels

    International Nuclear Information System (INIS)

    Yonekawa, Yasumasa.

    1980-01-01

    Purpose: To enable degassing from the top of a reactor vessel with no operator's exposure. Constitution: Degassing for the radioactive gases are conducted through the route of: reactor vessel vent line - main steam connection line - main steam line during reactor running and deaeration for water covering to the reactor vessel during shut down of the reactor is conducted through the route of: vent line - drain line. In this case, one end of the main steam connection line, whose the other end is connected to the main steam line, is connected with the vent line above the highest level of the water covering position in the reactor vessel. The above constitution can save the mounting of a manual switching valve or a remote control valve to the main steam connection line to thereby protect operators against radioactive exposure. (Furukawa, Y.)

  19. Caribbean Marine Mammal Assessment Vessel Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets are a compilation of large vessel surveys for marine mammal stock assessments in Caribbean waters conducted during 2000-2001. These surveys were...

  20. Atlantic Marine Mammal Assessment Vessel Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets are a compilation of large vessel surveys for marine mammal stock assessments in South Atlantic (Florida to Maryland) waters from 1994 to the...

  1. 2011 Pleasure Craft Sailing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  2. 2013 Pleasure Craft and Sailing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  3. 2013 Tug and Towing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  4. TMI-2 Vessel Investigation Project integration report

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, J. R.; Rempe, J. L.; Stickler, L. A.; Korth, G. E.; Diercks, D. R.; Neimark, L. A.; Akers, D W; Schuetz, B. K.; Shearer, T L; Chavez, S. A.; Thinnes, G. L.; Witt, R. J.; Corradini, M L; Kos, J. A. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-03-01

    The Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) was an international effort that was sponsored by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The primary objectives of the VIP were to extract and examine samples from the lower head and to evaluate the potential modes of failure and the margin of structural integrity that remained in the TMI-2 reactor vessel during the accident. This report presents a summary of the major findings and conclusions that were developed from research during the VIP. Results from the various elements of the project are integrated to form a cohesive understanding of the vessel`s condition after the accident.

  5. Results of reactor pressure vessels ISI

    International Nuclear Information System (INIS)

    Cepcek, S.

    1994-01-01

    To find out the possible influence of the annealing process to reactor pressure vessel integrity, a large in-service inspection programme has been implemented as an associated activity to reactor pressure vessel annealing. In this paper the approach to the RPV in-service inspection is shown. Also, the main results and conclusions following in-service inspection are presented. (author). 3 refs, 1 fig

  6. Analysis of nuclear reactor pressure vessel flanges

    International Nuclear Information System (INIS)

    Oliveira, C.A.N. de; Augusto, O.B.

    1985-01-01

    This work proposes a methodology for the structural analysis of high diameter nuclear reactor pressure vessel flanges. In the analysis the vessel is divided into shell-of-revolution elements, the flanges are represented by rigid rings, and the bolts are treated as beams. The flexibility method is used for solving the problem, and the results are compared with results obtained by the finite element method. (Author) [pt

  7. Anatomically corrected transposition of great vessels

    International Nuclear Information System (INIS)

    Ivanitskij, A.V.; Sarkisova, T.N.

    1989-01-01

    The paper is concerned with the description of rare congenital heart disease: anatomically corrected malposition of major vessels in a 9-mos 24 day old girl. The diagnosis of this disease was shown on the results of angiocardiography, concomitant congenital heart diseases were descibed. This abnormality is characterized by common atrioventricular and ventriculovascular joints and inversion position of the major vessels, it is always attended by congenital heart diseases. Surgical intervention is aimed at the elimination of concomitant heart dieseases

  8. Design concept for vessels and heat exchangers

    International Nuclear Information System (INIS)

    Elfmann, W.; Ferrari, L.D.B.

    1981-01-01

    A design concept for vessels and heat exchangers against internal and external loads resulting from normal operation and accident is shown. A definition and explanation of the operating conditions and stress levels are given. A description of the type of analysis (stress, fatigue, deformation, stability, earthquake and vibration) is presented in detail, also including technical guidelines which are used for the vessels and heat exchangers and their individual structure parts. (Author) [pt

  9. Pressure vessel integrity and weld inspection procedure

    International Nuclear Information System (INIS)

    Solomon, K.A.; Okrent, D.; Kastenberg, W.E.

    1975-01-01

    The primary objective of this paper is to develop a simple methodology which, when coupled with existing observations on pressure vessel behavior, provides an inter-relation between pressure vessel integrity, and the parameters of the in-service inspection program, including inspection sample size, frequency and efficiency. A modified Markov process is employed and a computer code was written to obtain numerical results. The Markov process mathematically describes the following physical events. In a nuclear reactor pressure vessel weld, some defects may exist prior to the zeroth inspection (i.e., prior to vessel operation). During the zeroth inspection and repair processes, some of these defects are removed. During the first cycle of vessel operation, the existing defects may grow and some new defects may be generated. Those defects that are found at the first (and succeeding) inspection interval and warrant repair, are repaired. The above process continues through several operating cycles to the end of vessel life. During any inspection, only a portion of the welds may be inspected, and with less than perfect efficiency

  10. United States Merchant Marine Academy: Internal Control Weaknesses Resulted in Improper Sources and Uses of Funds; Some Corrective Actions Are Under Way. Report to Congressional Committees. GAO-09-635

    Science.gov (United States)

    Franzel, Jeanette M.

    2009-01-01

    The U.S. Merchant Marine Academy (Academy), a component of the Department of Transportation's Maritime Administration (MARAD), is one of five U.S. service academies. The Academy is affiliated with 14 nonappropriated fund instrumentalities (NAFI) and two foundations. The US Government Accountability Office (GAO) was asked to determine whether…

  11. Vessel discoloration detection in malarial retinopathy

    Science.gov (United States)

    Agurto, C.; Nemeth, S.; Barriga, S.; Soliz, P.; MacCormick, I.; Taylor, T.; Harding, S.; Lewallen, S.; Joshi, V.

    2016-03-01

    Cerebral malaria (CM) is a life-threatening clinical syndrome associated with malarial infection. It affects approximately 200 million people, mostly sub-Saharan African children under five years of age. Malarial retinopathy (MR) is a condition in which lesions such as whitening and vessel discoloration that are highly specific to CM appear in the retina. Other unrelated diseases can present with symptoms similar to CM, therefore the exact nature of the clinical symptoms must be ascertained in order to avoid misdiagnosis, which can lead to inappropriate treatment and, potentially, death. In this paper we outline the first system to detect the presence of discolored vessels associated with MR as a means to improve the CM diagnosis. We modified and improved our previous vessel segmentation algorithm by incorporating the `a' channel of the CIELab color space and noise reduction. We then divided the segmented vasculature into vessel segments and extracted features at the wall and in the centerline of the segment. Finally, we used a regression classifier to sort the segments into discolored and not-discolored vessel classes. By counting the abnormal vessel segments in each image, we were able to divide the analyzed images into two groups: normal and presence of vessel discoloration due to MR. We achieved an accuracy of 85% with sensitivity of 94% and specificity of 67%. In clinical practice, this algorithm would be combined with other MR retinal pathology detection algorithms. Therefore, a high specificity can be achieved. By choosing a different operating point in the ROC curve, our system achieved sensitivity of 67% with specificity of 100%.

  12. Automated measurement of retinal blood vessel tortuosity

    Science.gov (United States)

    Joshi, Vinayak; Reinhardt, Joseph M.; Abramoff, Michael D.

    2010-03-01

    Abnormalities in the vascular pattern of the retina are associated with retinal diseases and are also risk factors for systemic diseases, especially cardiovascular diseases. The three-dimensional retinal vascular pattern is mostly formed congenitally, but is then modified over life, in response to aging, vessel wall dystrophies and long term changes in blood flow and pressure. A characteristic of the vascular pattern that is appreciated by clinicians is vascular tortuosity, i.e. how curved or kinked a blood vessel, either vein or artery, appears along its course. We developed a new quantitative metric for vascular tortuosity, based on the vessel's angle of curvature, length of the curved vessel over its chord length (arc to chord ratio), number of curvature sign changes, and combined these into a unidimensional metric, Tortuosity Index (TI). In comparison to other published methods this method can estimate appropriate TI for vessels with constant curvature sign and vessels with equal arc to chord ratios, as well. We applied this method to a dataset of 15 digital fundus images of 8 patients with Facioscapulohumeral muscular dystrophy (FSHD), and to the other publically available dataset of 60 fundus images of normal cases and patients with hypertensive retinopathy, of which the arterial and venous tortuosities have also been graded by masked experts (ophthalmologists). The method produced exactly the same rank-ordered list of vessel tortuosity (TI) values as obtained by averaging the tortuosity grading given by 3 ophthalmologists for FSHD dataset and a list of TI values with high ranking correlation with the ophthalmologist's grading for the other dataset. Our results show that TI has potential to detect and evaluate abnormal retinal vascular structure in early diagnosis and prognosis of retinopathies.

  13. Sustainable Oceanographic Vessels - Setting an Example

    Science.gov (United States)

    van Leer, J. C.

    2009-12-01

    In response to climate change, global warming and post “peak oil” fuel scarcity, the oceanographic community should consider reducing its carbon foot print. Why should scientists operate inefficient vessels while lecturing the general public on the need to reduce CO2 emissions? We have already seen curtailment of ship schedules and ship lay-ups, due in part to rising fuel costs, following $140/barrel crude oil. When the global recession ends, upward pressure on oil prices will again commence. Who can forecast how high fuel prices may ultimately rise during the typical 25-30 year lifetime of a research vessel? Are we to curtail future work at sea when oceanic climate research is becoming ever more important? A catamaran research vessel has been designed which can be electrically propelled from by a combination of high efficiency generators, photovoltaic panels and/or sails. Sail produced power is transformed with propellers and motor/generators into electric power which is stored in battery banks. This vessel could operate as the first true hybrid oceanographic research vessel. It could even continue operations without fuel in cases of a severe fuel shortage or fueling denial. Since the power produced by any water turbine increases with the cube of the velocity flowing over its propeller, the low fluid friction and high stability of a catamaran, with reasonably slender hulls, provide an important boost to efficient hybrid operation. The author has chartered a 42’ hybrid catamaran sailboat and found it efficient and extremely easy to operate and control. A 79’ motor sailing catamaran research vessel by Lock Crowther Designs will be presented as one example of a sustainable research vessel with excellent speed and sea-keeping. A center well makes operation as a small drilling/coring ship for coastal climate investigation possible. The center well also supports a host of remote sensing and robotic gear handling capabilities.

  14. Pressurized wet digestion in open vessels (T11)

    International Nuclear Information System (INIS)

    Kettisch, P.; Maichin, P.; Zischka, M.; Knapp, G.

    2002-01-01

    Full text: Pressurized wet digestion in closed vessels, microwave assisted or with conventional conductive heating, is the most important sample preparation technique for digestion or leaching procedures in element analysis. In comparison to open vessel digestion closed vessel digestion methods have many advantages, but there is one disadvantage - complex and expensive vessel designs. A new technique - pressurized wet digestion in open vessels - combine the advantages of closed vessel sample digestion with the application of simple and cheap open vessels made of quartz or PFA. The vessels are placed in a high pressure Asher HPA, which is adapted with a Teflon liner and filled partly with water. The analytical results with 30 ml quartz vessels, 22 ml PFA vessels and 1.5 ml PIA auto sampler cups will be shown. In principle every dimensions of vessels can be used. The vessels are loaded with sample material (max. 1.5 g with quartz vessels, max. 0.5 g with PFA vessels and 50 mg with auto sampler cups) and digestion reagent. Afterwards the vessels are simply covered with PTFE stoppers and not sealed. The vessels are transferred into a special adapted HPA and digested at temperatures up to 270 o C. The digestion time is 90 min. and cooling down to room temperature 30 min. The analytical results of CRM's are within the certified values and no cross contamination and losses of volatile elements could be observed. (author)

  15. 46 CFR 170.055 - Definitions concerning a vessel.

    Science.gov (United States)

    2010-10-01

    ... due to heel, trim, or submergence of the vessel. (f) Documented alterations means changes to the.... (p) Tank vessel means a vessel that is specially constructed or converted to carry liquid bulk cargo in tanks. (q) Tank barge means a tank vessel not equipped with a means of self-propulsion. (r) Tank...

  16. 46 CFR 184.115 - Applicability to existing vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Applicability to existing vessels. 184.115 Section 184... 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT General Provisions § 184.115 Applicability to existing vessels. (a) An existing vessel need not comply with §§ 184.402(c), 184.404, 184.410...

  17. 46 CFR 153.9 - Foreign flag vessel endorsement application.

    Science.gov (United States)

    2010-10-01

    ... each cargo. (4) The names of the U.S. ports in which the person anticipates operating the vessel. (5) The name of the vessel's flag administration. (6) The name of the society that classes the vessel. (7) A brief description of the vessel's cargo containment systems. (8) Hull type calculations. (9) The...

  18. 46 CFR 15.405 - Familiarity with vessel characteristics.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Familiarity with vessel characteristics. 15.405 Section... MANNING REQUIREMENTS Manning Requirements; All Vessels § 15.405 Familiarity with vessel characteristics. Each credentialed individual must become familiar with the relevant characteristics of the vessel on...

  19. 46 CFR 98.30-3 - Vessels carrying MPTs.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Vessels carrying MPTs. 98.30-3 Section 98.30-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL... Vessels carrying MPTs. Each MPT on a vessel to which this part applies must bear, on a metal or other...

  20. 46 CFR 50.30-15 - Class II pressure vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Class II pressure vessels. 50.30-15 Section 50.30-15... Fabrication Inspection § 50.30-15 Class II pressure vessels. (a) Class II pressure vessels shall be subject to... pressure vessels shall be performed during the welding of the longitudinal joint. At this time the marine...

  1. 46 CFR 50.30-20 - Class III pressure vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Class III pressure vessels. 50.30-20 Section 50.30-20... Fabrication Inspection § 50.30-20 Class III pressure vessels. (a) Class III pressure vessels shall be subject... specifically exempted by other regulations in this subchapter. (b) For Class III welded pressure vessels, one...

  2. 46 CFR 61.10-5 - Pressure vessels in service.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Pressure vessels in service. 61.10-5 Section 61.10-5... INSPECTIONS Tests and Inspections of Pressure Vessels § 61.10-5 Pressure vessels in service. (a) Basic requirements. Each pressure vessel must be examined or tested every 5 years. The extent of the test or...

  3. 36 CFR 13.1160 - Restrictions on vessel entry.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Restrictions on vessel entry. 13.1160 Section 13.1160 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Vessel Permits § 13.1160 Restrictions on vessel entry. The superintendent will allow vessel entry in...

  4. 33 CFR 157.216 - Required documents: Foreign tank vessels.

    Science.gov (United States)

    2010-07-01

    ...: Foreign tank vessels. (a) The owner, operator, and master of a foreign tank vessel meeting § 157.10a(b... following: (i) A letter from the government of the vessel's flag state that certifies that the vessel complies with Resolution 14 of the MARPOL 73/78. (ii) The letter of acceptance under § 157.204 and each...

  5. Cholinergic innervation of human mesenteric lymphatic vessels.

    Science.gov (United States)

    D'Andrea, V; Bianchi, E; Taurone, S; Mignini, F; Cavallotti, C; Artico, M

    2013-11-01

    The cholinergic neurotransmission within the human mesenteric lymphatic vessels has been poorly studied. Therefore, our aim is to analyse the cholinergic nerve fibres of lymphatic vessels using the traditional enzymatic techniques of staining, plus the biochemical modifications of acetylcholinesterase (AChE) activity. Specimens obtained from human mesenteric lymphatic vessels were subjected to the following experimental procedures: 1) drawing, cutting and staining of tissues; 2) staining of total nerve fibres; 3) enzymatic staining of cholinergic nerve fibres; 4) homogenisation of tissues; 5) biochemical amount of proteins; 6) biochemical amount of AChE activity; 6) quantitative analysis of images; 7) statistical analysis of data. The mesenteric lymphatic vessels show many AChE positive nerve fibres around their wall with an almost plexiform distribution. The incubation time was performed at 1 h (partial activity) and 6 h (total activity). Moreover, biochemical dosage of the same enzymatic activity confirms the results obtained with morphological methods. The homogenates of the studied tissues contain strong AChE activity. In our study, the lymphatic vessels appeared to contain few cholinergic nerve fibres. Therefore, it is expected that perivascular nerve stimulation stimulates cholinergic nerves innervating the mesenteric arteries to release the neurotransmitter AChE, which activates muscarinic or nicotinic receptors to modulate adrenergic neurotransmission. These results strongly suggest, that perivascular cholinergic nerves have little or no effect on the adrenergic nerve function in mesenteric arteries. The cholinergic nerves innervating mesenteric arteries do not mediate direct vascular responses.

  6. Unsupervised Retinal Vessel Segmentation Using Combined Filters.

    Directory of Open Access Journals (Sweden)

    Wendeson S Oliveira

    Full Text Available Image segmentation of retinal blood vessels is a process that can help to predict and diagnose cardiovascular related diseases, such as hypertension and diabetes, which are known to affect the retinal blood vessels' appearance. This work proposes an unsupervised method for the segmentation of retinal vessels images using a combined matched filter, Frangi's filter and Gabor Wavelet filter to enhance the images. The combination of these three filters in order to improve the segmentation is the main motivation of this work. We investigate two approaches to perform the filter combination: weighted mean and median ranking. Segmentation methods are tested after the vessel enhancement. Enhanced images with median ranking are segmented using a simple threshold criterion. Two segmentation procedures are applied when considering enhanced retinal images using the weighted mean approach. The first method is based on deformable models and the second uses fuzzy C-means for the image segmentation. The procedure is evaluated using two public image databases, Drive and Stare. The experimental results demonstrate that the proposed methods perform well for vessel segmentation in comparison with state-of-the-art methods.

  7. Baking results of KSTAR vacuum vessel

    International Nuclear Information System (INIS)

    Kim, S. T.; Kim, Y. J.; Kim, K. M.; Im, D. S.; Joung, N. Y.; Yang, H. L.; Kim, Y. S.; Kwon, M.

    2009-01-01

    The Korea Superconducting Tokamak Advanced Research (KSTAR) is an advanced superconducting tokamak designed to establish a scientific and technological basis for an attractive fusion reactor. The fusion energy in the tokamak device is released through fusion reactions of light atoms such as deuterium or helium in hot plasma state, of which temperature reaches several hundreds of millions Celsius. The high temperature plasma is created in the vacuum vessel that provides ultra high vacuum status. Accordingly, it is most important for the vacuum condition to keep clean not only inner space but also surface of the vacuum vessel to make high quality plasma. There are two methods planned to clean the wall surface of the KSTAR vacuum vessel. One is surface baking and the other is glow discharge cleaning (GDC). To bake the vacuum vessel, De-Ionized (DI) water is heated to 130 .deg. C and circulated in the passage between double walls of the vacuum vessel (VV) in order to bake the surface. The GDC operation uses hydrogen and inert gas discharges. In this paper, general configuration and brief introduction of the baking result will be reported

  8. Reactor vessel supported by flexure member

    International Nuclear Information System (INIS)

    Crawford, J.D.; Pankow, B.

    1977-01-01

    According to the present invention there is provided an improved arrangement for supporting a reactor vessel within a containment structure against static and dynamic vertical loadings capable of being imposed as a result of a serious accident as well as during periods of normal plant operation. The support arrangement of the invention is, at the same time, capable of accommodating radial displacements that normally occur between the reactor vessel and the containment structure due to operational transients. The arrangement comprises a plurality of vertical columns connected between the reactor vessel and a support base within the containment structure. The columns are designed to accommodate relative displacements between the vessel and the containment structure by flexing. This eliminates the need for relative sliding movements and thus enables the columns to be securely fixed to the vessel. This elimination of a provision for relative sliding movements avoids the spaces or gaps between the retention members and the retained elements as occurred in prior art arrangements and, concomitantly, the danger of establishing impact forces on the retention members in the event of an accident is reduced. (author)

  9. NMR blood vessel imaging method and apparatus

    International Nuclear Information System (INIS)

    Riederer, S.J.

    1988-01-01

    A high speed method of forming computed images of blood vessels based on measurements of characteristics of a body is described comprising the steps of: subjecting a predetermined body area containing blood vessels of interest to, successively, applications of a short repetition time (TR) NMR pulse sequence during the period of high blood velocity and then to corresponding applications during the period of low blood velocity for successive heart beat cycles; weighting the collected imaging data from each application of the NMR pulse sequence according to whether the data was acquired during the period of high blood velocity or a period of low blood velocity of the corresponding heart beat cycle; accumulating weighted imaging data from a plurality of NMR pulse sequences corresponding to high blood velocity periods and from a plurality of NMR pulse sequences corresponding to low blood velocity periods; subtracting the weighted imaging data corresponding to each specific phase encoding acquired during the high blood velocity periods from the weighted imaging data for the same phase encoding corresponding to low blood velocity periods in order to compute blood vessel imaging data; and forming an image of the blood vessels of interest from the blood vessel imaging data

  10. Trends in Tissue Engineering for Blood Vessels

    Science.gov (United States)

    Nemeno-Guanzon, Judee Grace; Lee, Soojung; Berg, Johan Robert; Jo, Yong Hwa; Yeo, Jee Eun; Nam, Bo Mi; Koh, Yong-Gon; Lee, Jeong Ik

    2012-01-01

    Over the years, cardiovascular diseases continue to increase and affect not only human health but also the economic stability worldwide. The advancement in tissue engineering is contributing a lot in dealing with this immediate need of alleviating human health. Blood vessel diseases are considered as major cardiovascular health problems. Although blood vessel transplantation is the most convenient treatment, it has been delimited due to scarcity of donors and the patient's conditions. However, tissue-engineered blood vessels are promising alternatives as mode of treatment for blood vessel defects. The purpose of this paper is to show the importance of the advancement on biofabrication technology for treatment of soft tissue defects particularly for vascular tissues. This will also provide an overview and update on the current status of tissue reconstruction especially from autologous stem cells, scaffolds, and scaffold-free cellular transplantable constructs. The discussion of this paper will be focused on the historical view of cardiovascular tissue engineering and stem cell biology. The representative studies featured in this paper are limited within the last decade in order to trace the trend and evolution of techniques for blood vessel tissue engineering. PMID:23251085

  11. Motor-driven screwing and transporting tool for pressure vessels, especially pressure vessels for nuclear reactors

    International Nuclear Information System (INIS)

    Scholz, M.

    1976-01-01

    A screwing and transporting device for tensioning and loosening the reactor pressure vessel head is described. The advantage of the tool is its ability to unscrew the stud bolts from the lower part of the pressure vessel, too, and therefore make them accessible for in-service inspection. (TK) [de

  12. 40 CFR 1042.650 - Exemptions for migratory vessels and auxiliary engines on Category 3 vessels.

    Science.gov (United States)

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE... International Convention for the Protection of Life at Sea (SOLAS). The vessel owner must maintain compliance with these requirements for the life of the exempted engine. (ii) The vessel will be used in areas...

  13. Smooth muscle cell recruitment to lymphatic vessels requires PDGFB and impacts vessel size but not identity.

    Science.gov (United States)

    Wang, Yixin; Jin, Yi; Mäe, Maarja Andaloussi; Zhang, Yang; Ortsäter, Henrik; Betsholtz, Christer; Mäkinen, Taija; Jakobsson, Lars

    2017-10-01

    Tissue fluid drains through blind-ended lymphatic capillaries, via smooth muscle cell (SMC)-covered collecting vessels into venous circulation. Both defective SMC recruitment to collecting vessels and ectopic recruitment to lymphatic capillaries are thought to contribute to vessel failure, leading to lymphedema. However, mechanisms controlling lymphatic SMC recruitment and its role in vessel maturation are unknown. Here, we demonstrate that platelet-derived growth factor B (PDGFB) regulates lymphatic SMC recruitment in multiple vascular beds. PDGFB is selectively expressed by lymphatic endothelial cells (LECs) of collecting vessels. LEC-specific deletion of Pdgfb prevented SMC recruitment causing dilation and failure of pulsatile contraction of collecting vessels. However, vessel remodelling and identity were unaffected. Unexpectedly, Pdgfb overexpression in LECs did not induce SMC recruitment to capillaries. This was explained by the demonstrated requirement of PDGFB extracellular matrix (ECM) retention for lymphatic SMC recruitment, and the low presence of PDGFB-binding ECM components around lymphatic capillaries. These results demonstrate the requirement of LEC-autonomous PDGFB expression and retention for SMC recruitment to lymphatic vessels, and suggest an ECM-controlled checkpoint that prevents SMC investment of capillaries, which is a common feature in lymphedematous skin. © 2017. Published by The Company of Biologists Ltd.

  14. Modeling the microclimate inside a vessel in in vitro culture : vessel ...

    African Journals Online (AJOL)

    Numerical simulations show that variations in vessel internal humidity was sensitive to transfer coefficient, climatic conditions within the growth chamber, evaporation and condensation of water vapor on the walls of the vessel. The variations in water vapor pressure deficits (VPD) (low during the nyctiperiod and high during ...

  15. Vessel, motion platform, method for compensating motions of a vessel and use of a stewart platform

    NARCIS (Netherlands)

    Van der Tempel, J.; Salzmann, D.J.C.; Koch, J.; Gerner, F.; Goebel, A.J.

    2007-01-01

    A vessel (1) with a motion compensation platform (4), which platform is provided with at least one carrier (6) for bearing, moving and/or transferring a load, actuators (5) for moving the carrier relative to the vessel, preferably in six degrees of freedom, a control system for driving the actuators

  16. Earthquake-proof supporting structure in reactor vessel

    International Nuclear Information System (INIS)

    Sakurai, Akio; Sekine, Katsuhisa; Madokoro, Manabu; Katoono, Shin-ichi; Konno, Mutsuo; Suzuki, Takuro.

    1990-01-01

    Conventional earthquake-proof structure comprises a vessel vibration stopper integrated to a reactor vessel, powder for restricting the horizontal displacements, a safety vessel surrounds the outer periphery of the reactor vessel and a safety vessel vibration stopper integrated therewith, which are fixed to buildings. However, there was a problem that a great amount of stresses are generated in the base of the reactor vessel vibration stopper due to reaction of the powders which restrict thermal expansion. In order to remarkably reduce the reaction of the powers, powders are charged into a spaces formed between each of the reactor vessel vibration stopper, the safety vessel vibration stopper and the flexible member disposed between them. According to this constitution, the reactor vessel vibration stopper does not undergo a great reaction of the powers upon thermal expansion of the reactor vessel to moderate the generated stresses, maintain the strength and provide earthquake-proof supporting function. (N.H.)

  17. Seals for sealing a pressure vessel such as a nuclear reactor vessel or the like

    International Nuclear Information System (INIS)

    Bruns, H.J.; Huelsermann, K.H.

    1975-01-01

    A description is given of seals for sealing a pressure vessel such as a nuclear reactor vessel, steam boiler vessel, or any other vessel which is desirably sealed against pressure of the type including a housing and a housing closure that present opposed vertical sealing surfaces which define the sides of a channel. The seals of the present invention comprise at least one sealing member disposed in the channel, having at least one stop face, a base portion and two shank portions extending from the base portion to form a groove-like recess. The shank portions are provided with sealing surfaces arranged to mate with the opposed vertical pressure vessel sealing surfaces. A shank-spreading wedge element also disposed in the channel has at least one stop face and is engaged in the groove-like recess with the sealing member and wedge element stop face adjacent to each other

  18. Comparing algorithms for automated vessel segmentation in computed tomography scans of the lung: The VESSEL12 study

    NARCIS (Netherlands)

    Rudyanto, R.D.; Kerkstra, S.; Rikxoort, E.M. van; Fetita, C.; Brillet, P.-Y.; Lefevre, C.; Xue, W.; Zhu, X; Liang, J.; Öksüz, I.; Ünay, D.; Kadipasaoglu, K.; Estépar, R.S.J.; Ross, J.C.; Washko, G.R.; Prieto, J.-C.; Hoyos, M.H.a.; Orkisz, M.; Meine, H.; Hüllebrand, M.; Stöcker, C.; Mir, F.L.; Naranjo, V.; Villanueva, E.; Staring, M.; Xiao, C.; Stoel, B.C.; Fabijanska, A.; Smistad, E.; Elster, A.C.; Lindseth, F.; Foruzan, A.H.; Kiros, R.; Popuri, K.; Cobzas, D.; Jimenez-Carretero, D.; Santos, A.; Ledesma-Carbayo, M.J.; Helmberger, M.; Urschler, M.; Pienn, M.; Bosboom, D.G.H.; Campo, A.; Prokop, M.; Jong, P.A. de; Solorzano, C.O. de; Muñoz-Barrutia, A.; Ginneken, B. van

    2014-01-01

    The {VESSEL12} ({VES}sel {SE}mentation in the {L}ung) challenge objectively compares the performance of different algorithms to identify vessels in thoracic computed tomography ({CT}) scans. Vessel segmentation is fundamental in computer aided processing of data generated by 3D imaging modalities.

  19. TMI-2 Vessel Investigation Project integration report

    International Nuclear Information System (INIS)

    Wolf, J.R.; Rempe, J.L.; Stickler, L.A.; Korth, G.E.; Diercks, D.R.; Neimark, L.A.; Akers, D.W.; Schuetz, B.K.; Shearer, T.L.; Chavez, S.A.; Thinnes, G.L.; Witt, R.J.; Corradini, M.L.; Kos, J.A.

    1994-03-01

    The Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) was an international effort that was sponsored by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The primary objectives of the VIP were to extract and examine samples from the lower head and to evaluate the potential modes of failure and the margin of structural integrity that remained in the TMI-2 reactor vessel during the accident. This report presents a summary of the major findings and conclusions that were developed from research during the VIP. Results from the various elements of the project are integrated to form a cohesive understanding of the vessel's condition after the accident

  20. Small Ro/Pax Vessel stability study

    DEFF Research Database (Denmark)

    Erichsen, Henrik; Kristensen, Hans Otto Holmegaard; Jensen, Jørgen Juncher

    2015-01-01

    not sufficient, i.e. that the current safety level according to SOLAS 2009 is less than the old safety level according to SOLAS 90. In order to establish a solid foundation for the discussion, this study was made possible by a grant from The Danish Maritime Fund. The study focus on small ro/pax vessels......In 2009 new damage stability requirements for passenger ships based on a probabilistic method were adopted by IMO and are now part of the current SOLAS Chapter II-1 regulations (SOLAS 2009). The mandate from IMO was to keep the same safety level as inherent in the old deterministic damage stability...... regulations in SOLAS (SOLAS 90). During the rule development prior to the adoption, it was argued that the safety level for large passenger ships should be increased, but small ro/pax vessels were only rudimentarily looked at and small vessels with very high attained index were seen as “non...

  1. Evaluation of buckling on containment metallic vessels

    International Nuclear Information System (INIS)

    Silveira, Renato Campos da; Mattar Neto, Miguel

    2000-01-01

    The buckling analysis represents one of the most important aspects of the structural projects of nuclear power plants containment metallic vessels and in this work the Case N-284-1 ASME Code is used for evaluation of those structures submitted to this failure mode. From the stress analysis, performed by using finite element method on discrete structures with shell elements, the procedure of the Code Case are applied to the evaluation of the containment metallic vessel of the Angra 2 nuclear power plant submitted to the own weight, seismic loads and uplift in case of accident. A study of pressure vessel reinforced by rings submit ed to the external pressure. Conclusions and commentaries are established based on the obtained results

  2. Therapeutic update in large vessel vasculitides.

    Science.gov (United States)

    Pérez-Esteban, S; González-Gay, M A; Castañeda, S

    2013-10-01

    The term large vessel vasculitidis includes two distinct clinical entities: Takayasu's arteritis and giant cell arteritis. Takayasu's arteritis mainly affects children and women under 40 years, affecting the aorta and its major branches. Its incidence in Southern Europe is low. Giant cell arteritis is the most common vasculitis in those 60. Its incidence in the European population is greater than that of Takayasu's arteritis. It mainly affects the extracranial vessels, especially those derived from the carotid artery. Both conditions are characterized by inflammation of the vessel wall, this causing structural damage and the expression of different clinical manifestations. The treatment of choice of both conditions is based on high-dose glucocorticoids associated, in some cases, to immunosuppressants. Biologic agents have been reserved for cases refractory to conventional therapies. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  3. A framework expert system for pressure vessels

    International Nuclear Information System (INIS)

    Wang, Y.C.; Qin, S.J.

    1989-01-01

    Expert systems, known as a powerful tool to those numerical problems accompanied with logical argumentation, are facing the era of extended application into the engineering fields beyond the classical scopes of diagnosis and consultation. With regard to pressure vessels design it seems that the most important task is to establish a general purpose frame based on a microcomputer skeleton system to meet the various requirements of different vessels. The authors have made an attempt to perform such a skeleton designated file, ESTOOL, in order to achieve the objectives of executing numerical calculation combined with logical reasoning, and attaining higher efficiency of rules searching process. It has been successfully patched to the design software package for jacketed vessel with stirring shaft. This paper presents the guiding concepts and basic structure of ESTOOL via knowledge acquisition subsystem and inference engine

  4. Curved and conformal high-pressure vessel

    Science.gov (United States)

    Croteau, Paul F.; Kuczek, Andrzej E.; Zhao, Wenping

    2016-10-25

    A high-pressure vessel is provided. The high-pressure vessel may comprise a first chamber defined at least partially by a first wall, and a second chamber defined at least partially by the first wall. The first chamber and the second chamber may form a curved contour of the high-pressure vessel. A modular tank assembly is also provided, and may comprise a first mid tube having a convex geometry. The first mid tube may be defined by a first inner wall, a curved wall extending from the first inner wall, and a second inner wall extending from the curved wall. The first inner wall may be disposed at an angle relative to the second inner wall. The first mid tube may further be defined by a short curved wall opposite the curved wall and extending from the second inner wall to the first inner wall.

  5. Proactive life extension of pressure vessels

    Science.gov (United States)

    Mager, Lloyd

    1998-03-01

    For a company to maintain its competitive edge in today's global market every opportunity to gain an advantage must be exploited. Many companies are strategically focusing on improved utilization of existing equipment as well as regulatory compliance. Abbott Laboratories is no exception. Pharmaceutical companies such as Abbott Laboratories realize that reliability and availability of their production equipment is critical to be successful and competitive. Abbott Laboratories, like many of our competitors, is working to improve safety, minimize downtime and maximize the productivity and efficiency of key production equipment such as the pressure vessels utilized in our processes. The correct strategy in obtaining these objectives is to perform meaningful inspection with prioritization based on hazard analysis and risk. The inspection data gathered in Abbott Laboratories pressure vessel program allows informed decisions leading to improved process control. The results of the program are reduced risks to the corporation and employees when operating pressure retaining equipment. Accurate and meaningful inspection methods become the cornerstone of a program allowing proper preventative maintenance actions to occur. Successful preventative/predictive maintenance programs must utilize meaningful nondestructive evaluation techniques and inspection methods. Nondestructive examination methods require accurate useful tools that allow rapid inspection for the entire pressure vessel. Results from the examination must allow the owner to prove compliance of all applicable regulatory laws and codes. At Abbott Laboratories the use of advanced NDE techniques, primarily B-scan ultrasonics, has provided us with the proper tools allowing us to obtain our objectives. Abbott Laboratories uses B-scan ultrasonics utilizing a pulse echo pitch catch technique to provide essential data on our pressure vessels. Equipment downtime is reduced because the nondestructive examination usually takes

  6. Ex-vessel nuclear fuel transfer system

    International Nuclear Information System (INIS)

    Wade, E.E.

    1978-01-01

    A system for transferring fuel assemblies between a fuel transfer area and a fuel storage area while the fuel assemblies remain completely submerged in a continuous body of coolant is described. A fuel transfer area filled with reactor coolant communicating with the reactor vessel below the reactor coolant level provides a transfer area for fuel assemblies in transit to and from the reactor vessel. A positioning mechanism comprising at least one rotatable plug disposed on a fuel transfer tank located outside the reactor vessel cooperates with either the fuel transfer area or the fuel storage area to position a fuel assembly in transit. When in position, a transporting mechanism cooperating with the positioning mechanism lifts or lowers a chosen fuel assembly. The transporting mechanism together with the positioning mechanism are capable of transferring a fuel assembly between the fuel transfer area and the fuel storage area

  7. Examination of VVER-1000 Reactor Pressure Vessel

    International Nuclear Information System (INIS)

    Matokovic, A.; Picek, E.; Markulin, K.

    2008-01-01

    The increasing demand of a higher level of safety in the operation of the nuclear power plants requires the utilisation of more precise automated equipment to perform in-service inspections. That has been achieved by technological advances in computer technology, in robotics, in examination probe technology with the development of the advanced inspection technique and has also been due to the considerable and varied experience gained in the performance of such inspections. In-service inspection of reactor pressure vessel, especially Russian-designed WWER-1000 presents one of the most important and extensive examination of nuclear power plants primary circuit components. Such examination demand high standards of inspection technology, quality and continual innovation in the field of non-destructive testing advanced technology. A remote underwater contact ultrasonic technique is employed for the examination of the base metal of vessel and reactor welds, whence eddy current method is applied for clad surface examinations. Visual testing is used for examination of the vessel interior. The movement of inspection probes and data positioning are assured by using new reactor pressure vessel tool concept that is fully integrated with inspection systems. The successful performance of reactor pressure vessel is attributed thorough pre-outage planning, training and successful performance demonstration qualification of chosen non-destructive techniques on the specimens with artificial and/or real defects. Furthermore, use of advanced approach of inspection through implementation the state-of-the-art examination equipment significantly reduced the inspection time, radiation exposure to examination personnel, shortening nuclear power plant outage and cutting the total inspection costs. This paper presents advanced approach in the reactor pressure vessel in-service inspections and it is especially developed for WWER-1000 nuclear power plants.(author)

  8. Fast Generation of Container Vessel Stowage Plans

    DEFF Research Database (Denmark)

    Pacino, Dario

    is evaluated. In the second phase, the assignment of containers is refined to specific positions within the ship and lower level constraints are handled. The approach has been implemented with a combination of operations research and artificial intelligence methods, and has produced promising results on real....... Before the vessel arrives at a port, it is the job of a stowage coordinator to devise a stowage plan. A stowage plan is a document describing where each container should be loaded in the vessel once terminal operations commence. When creating stowage plans, stowage coordinators must make sure...

  9. Integrity of Magnox reactor steel pressure vessels

    International Nuclear Information System (INIS)

    Flewitt, P.E.J.; Williams, G.H.; Wright, M.B.

    1993-01-01

    The background to the safety assessment of the steel reactor pressure vessels for Magnox power stations is reviewed. The evolved philosophy adopted for the 1991 safety cases prepared for the continued operation of four Magnox power stations operated by Nuclear Electric plc is described together with different aspects of the multielement integrity argument. The main revisions to the mechanical property data are addressed together with the assessment methodology adopted and their implications for the overall integrity argument formulated for the continued safe operation of these reactor pressure vessels are discussed. (author)

  10. Reactor Structural Materials: Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Chaouadi, R

    2000-07-01

    The objectives of SCK-CEN's R and D programme on Rector Pressure Vessel (RPV) Steels are:(1) to complete the fracture toughness data bank of various reactor pressure vessel steels by using precracked Charpy specimens that were tested statically as well as dynamically; (2) to implement the enhanced surveillance approach in a user-friendly software; (3) to improve the existing reconstitution technology by reducing the input energy (short cycle welding) and modifying the stud geometry. Progress and achievements in 1999 are reported.

  11. Reactor Structural Materials: Reactor Pressure Vessel Steels

    International Nuclear Information System (INIS)

    Chaouadi, R.

    2000-01-01

    The objectives of SCK-CEN's R and D programme on Rector Pressure Vessel (RPV) Steels are:(1) to complete the fracture toughness data bank of various reactor pressure vessel steels by using precracked Charpy specimens that were tested statically as well as dynamically; (2) to implement the enhanced surveillance approach in a user-friendly software; (3) to improve the existing reconstitution technology by reducing the input energy (short cycle welding) and modifying the stud geometry. Progress and achievements in 1999 are reported

  12. Integrity of Magnox reactor steel pressure vessels

    International Nuclear Information System (INIS)

    Flewitt, P.E.J.; Williams, G.H.; Wright, M.B.

    1992-01-01

    The background to the safety assessment of the steel reactor pressure vessels for Magnox power stations is reviewed. The evolved philosophy adopted for the 1991 safety cases prepared for the continued operation of four Magnox power stations operated by Nuclear Electric plc is described, together with different aspects of the multi-legged integrity argument. The main revisions to the materials mechanical property data are addressed together with the assessment methodology adopted and their implications for the overall integrity argument formulated for the continued safe operation of these reactor pressure vessels. (author)

  13. Gas-liquid contacting in mixing vessels

    International Nuclear Information System (INIS)

    Mann, R.

    1983-01-01

    This report by Dr. R. Mann of UMIST presents a critical survey of literature on the contacting of gases with liquids in stirred vessels. Research undertaken in the last fifteen years in analysed, and promising areas for future research are identified. The report deals with physical contacting, mass transfer between the gas and liquid phases and the utilisation of the stirred vessel as a gas-liquid reactor. Three sections are given on gas-liquid contacting: physical aspects; interphase mass transfer; and chemical reactions. It also discusses recent new approaches and includes a summary of conclusions, nomenclature and references

  14. Internal Friction of Pressure Vessel Steel Embrittlement

    International Nuclear Information System (INIS)

    Van Ouytsel, K.

    2001-01-01

    The contribution consists of an abstract of a PhD thesis. The thesis contains a literature study, a description of the construction details of a new inverted torsion pendulum. This device was designed to investigate pressure-vessel steels at high amplitudes (10 -4 to 10 -2 ) and over a wide temperature range (90-700K) at approximately 1 Hz in the irradiated condition. Results of measurements on a variety of reactor pressure vessel steels by means of the torsion penduli are reported and interpreted

  15. Testing of a steel containment vessel model

    International Nuclear Information System (INIS)

    Luk, V.K.; Hessheimer, M.F.; Matsumoto, T.; Komine, K.; Costello, J.F.

    1997-01-01

    A mixed-scale containment vessel model, with 1:10 in containment geometry and 1:4 in shell thickness, was fabricated to represent an improved, boiling water reactor (BWR) Mark II containment vessel. A contact structure, installed over the model and separated at a nominally uniform distance from it, provided a simplified representation of a reactor shield building in the actual plant. This paper describes the pretest preparations and the conduct of the high pressure test of the model performed on December 11-12, 1996. 4 refs., 2 figs

  16. S-a vessel stress analysis

    International Nuclear Information System (INIS)

    Dahlgren, F.; Ellis, R. III; Rogoff, P.

    1981-01-01

    The Spheromak vacuum vessel stress analysis as performed using an MSC/NASTRAN finite element code. Results of a 1/8th symmetric section of the vessel including atmospheric, EF magnetic field loads, and gravity loads are presented. Preliminary results are compared with the results of a more refined model that uses substructuring with cyclic and dihedral symmetry. A comparison of the results of the two models is presented along with a comparison of the structural stiffness with and without reforcing ribs and nozzle

  17. Multiscale Vessel-guided Airway Tree Segmentation

    DEFF Research Database (Denmark)

    Lo, Pechin Chien Pau; Sporring, Jon; de Bruijne, Marleen

    2009-01-01

    This paper presents a method for airway tree segmentation that uses a combination of a trained airway appearance model, vessel and airway orientation information, and region growing. The method uses a voxel classification based appearance model, which involves the use of a classifier that is trai......This paper presents a method for airway tree segmentation that uses a combination of a trained airway appearance model, vessel and airway orientation information, and region growing. The method uses a voxel classification based appearance model, which involves the use of a classifier...

  18. Cylindrical pressure vessel constructed of several layers

    International Nuclear Information System (INIS)

    Yamauchi, Takeshi.

    1976-01-01

    For a cylindrical pressure vessel constructed of several layers whose jacket has at least one circumferential weld joining the individual layers, it is proposed to provide this at least at the first bending line turning point (counting from the weld between the jacket and vessel floor), which the sinusoidally shaped jacket has. The section of the jacket extending in between should be made as a full wall section. The proposal is based on calculations of the bending stiffness of cylindrical jackets, which could not yet be confirmed for jackets having several layers. (UWI) [de

  19. Electromagnetic protection assessment of naval vessels

    NARCIS (Netherlands)

    Middelkoop, R.; Vernooy, J.A.M.

    1993-01-01

    Modern naval vessels are well equipped with a lot of weapon and sensor systems, all controlled by electronics. Mutual interference between all those electronic systems as well as illumination of a ship by an Electromagnetic Pulse (EMP) caused by lightning or by a nuclear detonation can potentially

  20. On the hydrostatic test for nuclear vessels

    International Nuclear Information System (INIS)

    Palmero, A.

    1979-01-01

    A comparison of the pressure test requirements, namely specified values of pressure and temperature, for nuclear vessels designed and constructed according to the ASME Code and Spanish Rules is presented. Also the relationship of the design criteria and the pressure test requirements is indicated with a particular emphasis on the test temperature in order to avoid brittle behaviour of the materials. (author)

  1. 78 FR 14053 - Vessel Documentation Renewal Fees

    Science.gov (United States)

    2013-03-04

    ... Effects L. Technical Standards M. Environment I. Public Participation and Request for Comments We... (including potential economic, environmental, public health and safety effects, distributive impacts, and... size data. We determined that there are approximately 18,164 entities owning 65,534 commercial vessels...

  2. 15 CFR 970.205 - Vessel safety.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Vessel safety. 970.205 Section 970.205... safety. In order to provide a basis for the necessary determinations with respect to the safety of life... Safety of Life at Sea, 1974 (SOLAS 74) possesses current valid SOLAS 74 certificates; (2) That any...

  3. 46 CFR 298.11 - Vessel requirements.

    Science.gov (United States)

    2010-10-01

    ... international agreements to which that country is a signatory, and (iii) Laws of the ports it serves. (b) Actual... shipyard directly and may require you to have the shipyard that has contracted to build the Vessel to... applicable treaties and conventions to which the United States is a signatory, including, but not limited to...

  4. Liquid Nitrogen Subcooler Pressure Vessel Engineering Note

    Energy Technology Data Exchange (ETDEWEB)

    Rucinski, R.; /Fermilab

    1997-04-24

    The normal operating pressure of this dewar is expected to be less than 15 psig. This vessel is open to atmospheric pressure thru a non-isolatable vent line. The backpressure in the vent line was calculated to be less than 1.5 psig at maximum anticipated flow rates.

  5. Radiation embrittlement predictions for reactor pressure vessels

    International Nuclear Information System (INIS)

    Stahlkopf, K.E.; Marston, T.U.

    1979-01-01

    The purpose of a surveillance program in a nuclear reactor pressure vessel is to provide an accurate measure of the changes in properties necessary to assess the structural integrity of the beltline region of the vessel as it is subjected to neutron irradiation damage. To understand problems surrounding a surveillance program, it is necessary to look at the concept of a structural integrity analysis. The structural integrity analysis can, of course, be only as accurate as the input data allows. Any errors in materials properties due to either errors in test technique to obtain these properties or to test specimens being exposed to environments different than actual operating condition will be reflected as errors in the actual structural integrity analysis. In a surveillance program, we must then be sure that we are measuring the proper material property to input to the fracture mechanics model as well as insure that the irradiation environment to which we subject the specimens will not cause an error in the prediction of the actual integrity margin of the pressure vessel beltline. The following text will question the appropriateness of using irradiated materials property data derived from high flux experiment, either in test reactors or advanced surveillance positions, to predict the actual material condition at the reactor vessel wall. Additionally, data will be presented showing several new correlation methods for deriving fracture toughness data from Charpy specimens, thus giving the proper input to the fracture mechanics model of a structural integrity analysis

  6. Stowing the Right Containers on Container Vessels

    DEFF Research Database (Denmark)

    Jensen, Rune Møller

    2014-01-01

    ’s largest container vessels using standard mathematical programming techniques and off-the-shelf solvers. The presentation will provide basic insight into the domain, with pointers to further information that enable you to join in this promising new path of operations research and business....

  7. Calcification of intracranial vessels in neurocysticercosis

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Bouzas, A. [ENEP Iztacala, Universidad Nacional Autonoma de Mexico, Mexico (Mexico); Ballesteros-Maresma, A. [Radiologia Clinica de Cuernavaca (Mexico); Casian, G.; Hernandez-Martinez, P. [Hospital Juarez de Mexico S. S. (Mexico); Martinez-Lopez, M. [Fundacion Clinica Medica Sur (Mexico)

    2000-07-01

    We report calcification of intracranial vessels in neurocysticercosis. Calcification was observed in the middle cerebral arteries in two patients, and the circle of Willis in two others. The patients with middle cerebral artery calcification underwent CT with inhaled stable xenon and an area of mild hypoperfusion was observed in the ipsilateral cerebral hemisphere. (orig.)

  8. Unsupervised Retinal Vessel Segmentation Using Combined Filters

    Science.gov (United States)

    Oliveira, Wendeson S.; Teixeira, Joyce Vitor; Ren, Tsang Ing; Cavalcanti, George D. C.; Sijbers, Jan

    2016-01-01

    Image segmentation of retinal blood vessels is a process that can help to predict and diagnose cardiovascular related diseases, such as hypertension and diabetes, which are known to affect the retinal blood vessels’ appearance. This work proposes an unsupervised method for the segmentation of retinal vessels images using a combined matched filter, Frangi’s filter and Gabor Wavelet filter to enhance the images. The combination of these three filters in order to improve the segmentation is the main motivation of this work. We investigate two approaches to perform the filter combination: weighted mean and median ranking. Segmentation methods are tested after the vessel enhancement. Enhanced images with median ranking are segmented using a simple threshold criterion. Two segmentation procedures are applied when considering enhanced retinal images using the weighted mean approach. The first method is based on deformable models and the second uses fuzzy C-means for the image segmentation. The procedure is evaluated using two public image databases, Drive and Stare. The experimental results demonstrate that the proposed methods perform well for vessel segmentation in comparison with state-of-the-art methods. PMID:26919587

  9. Heavy wall pressure vessels for energy systems

    International Nuclear Information System (INIS)

    Canonico, D.A.

    Modifications of steels currently accepted in the Code appear to provide improved mechanical properties. These steels may permit the fabrication of larger diameter vessels with thinner section sizes and improved reliability and integrity. Adapting current specifications should expedite Code approval. Finally the challenge of improving welding procedures and adapting processes for field applications will result in higher quality weldments

  10. Reactor pressure vessel with forged nozzles

    Science.gov (United States)

    Desai, Dilip R.

    1993-01-01

    Inlet nozzles for a gravity-driven cooling system (GDCS) are forged with a cylindrical reactor pressure vessel (RPV) section to which a support skirt for the RPV is attached. The forging provides enhanced RPV integrity around the nozzle and substantial reduction of in-service inspection costs by eliminating GDCS nozzle-to-RPV welds.

  11. Stress criteria for nuclear vessel concrete

    International Nuclear Information System (INIS)

    Costes, D.

    1975-01-01

    Concrete nuclear vessels are submitted to prestressing forces which limit tensile stresses in concrete when the vessel is under pressure with thermal gradients. Hence, the most severe conditions for concrete appear when the vessel is prestressed and not submitted to internal pressure. The triaxial states of stress in the concrete may be computed postulating elastic or other behavior and compared with safe limits obtained from rupture tests and fatigue tests. The first part of the paper, recalls experimental rupture results and the acceptability procedures currently used. Criteria founded on the lemniscoid surfaces are proposed, parameters for which are obtained by various tests and safety considerations. In the second part, rupture tests are reported on small, thick, cylindrical vessels submitted to external hydraulic pressure simulating prestressing forces. Materials used are plain concrete, microconcrete, marble and graphite. The strengths obtained are much higher than those which could be elastically computed, triaxial rupture states being provided by previous experiments. Such results may be due to a plastic stress redistribution before fracture and to stabilizing effects of stress gradients around the more stressed areas. Fatigue tests by external hydraulic loading are reported [fr

  12. Online wave estimation using vessel motion measurements

    DEFF Research Database (Denmark)

    H. Brodtkorb, Astrid; Nielsen, Ulrik D.; J. Sørensen, Asgeir

    2018-01-01

    In this paper, a computationally efficient online sea state estimation algorithm isproposed for estimation of the on site sea state. The algorithm finds the wave spectrum estimate from motion measurements in heave, roll and pitch by iteratively solving a set of linear equations. The main vessel p...

  13. An automated method for accurate vessel segmentation

    Science.gov (United States)

    Yang, Xin; Liu, Chaoyue; Le Minh, Hung; Wang, Zhiwei; Chien, Aichi; (Tim Cheng, Kwang-Ting

    2017-05-01

    Vessel segmentation is a critical task for various medical applications, such as diagnosis assistance of diabetic retinopathy, quantification of cerebral aneurysm’s growth, and guiding surgery in neurosurgical procedures. Despite technology advances in image segmentation, existing methods still suffer from low accuracy for vessel segmentation in the two challenging while common scenarios in clinical usage: (1) regions with a low signal-to-noise-ratio (SNR), and (2) at vessel boundaries disturbed by adjacent non-vessel pixels. In this paper, we present an automated system which can achieve highly accurate vessel segmentation for both 2D and 3D images even under these challenging scenarios. Three key contributions achieved by our system are: (1) a progressive contrast enhancement method to adaptively enhance contrast of challenging pixels that were otherwise indistinguishable, (2) a boundary refinement method to effectively improve segmentation accuracy at vessel borders based on Canny edge detection, and (3) a content-aware region-of-interests (ROI) adjustment method to automatically determine the locations and sizes of ROIs which contain ambiguous pixels and demand further verification. Extensive evaluation of our method is conducted on both 2D and 3D datasets. On a public 2D retinal dataset (named DRIVE (Staal 2004 IEEE Trans. Med. Imaging 23 501-9)) and our 2D clinical cerebral dataset, our approach achieves superior performance to the state-of-the-art methods including a vesselness based method (Frangi 1998 Int. Conf. on Medical Image Computing and Computer-Assisted Intervention) and an optimally oriented flux (OOF) based method (Law and Chung 2008 European Conf. on Computer Vision). An evaluation on 11 clinical 3D CTA cerebral datasets shows that our method can achieve 94% average accuracy with respect to the manual segmentation reference, which is 23% to 33% better than the five baseline methods (Yushkevich 2006 Neuroimage 31 1116-28; Law and Chung 2008

  14. In vessel core melt progression phenomena

    International Nuclear Information System (INIS)

    Courtaud, M.

    1993-01-01

    For all light water reactor (LWR) accidents, including the so called severe accidents where core melt down can occur, it is necessary to determine the amount and characteristics of fission products released to the environment. For existing reactors this knowledge is used to evaluate the consequences and eventual emergency plans. But for future reactors safety authorities demand decrease risks and reactors designed in such a way that fission products are retained inside the containment, the last protective barrier. This requires improved understanding and knowledge of all accident sequences. In particular it is necessary to be able to describe the very complex phenomena occurring during in vessel core melt progression because they will determine the thermal and mechanical loads on the primary circuit and the timing of its rupture as well as the fission product source term. On the other hand, in case of vessel failure, knowledge of the physical and chemical state of the core melt will provide the initial conditions for analysis of ex-vessel core melt progression and phenomena threatening the containment. Finally a good understanding of in vessel phenomena will help to improve accident management procedures like Emergency Core Cooling System water injection, blowdown and flooding of the vessel well, with their possible adverse effects. Research and Development work on this subject was initiated a long time ago and is still in progress but now it must be intensified in order to meet the safety requirements of the next generation of reactors. Experiments, limited in scale, analysis of the TMI 2 accident which is a unique source of global information and engineering judgment are used to establish and assess physical models that can be implemented in computer codes for reactor accident analysis

  15. Role of arginase in vessel wall remodeling

    Directory of Open Access Journals (Sweden)

    William eDurante

    2013-05-01

    Full Text Available Arginase metabolizes the semi-essential amino acid L-arginine to L-ornithine and urea. There are two distinct isoforms of arginase, arginase I and II, which are encoded by separate genes and display differences in tissue distribution, subcellular localization, and molecular regulation. Blood vessels express both arginase I and II but their distribution appears to be cell-, vessel-, and species-specific. Both isoforms of arginase are induced by numerous pathologic stimuli and contribute to vascular cell dysfunction and vessel wall remodeling in several diseases. Clinical and experimental studies have documented increases in the expression and/or activity of arginase I or II in blood vessels following arterial injury and in pulmonary and arterial hypertension, aging, and atherosclerosis. Significantly, pharmacological inhibition or genetic ablation of arginase in animals ameliorates abnormalities in vascular cells and normalizes blood vessel architecture and function in all of these pathological states. The detrimental effect of arginase in vascular remodeling is attributable to its ability to stimulate vascular smooth muscle cell and endothelial cell proliferation, and collagen deposition by promoting the synthesis of polyamines and L-proline, respectively. In addition, arginase adversely impacts arterial remodeling by directing macrophages towards an inflammatory phenotype. Moreover, the proliferative, fibrotic, and inflammatory actions of arginase in the vasculature are further amplified by its capacity to inhibit nitric oxide synthesis by competing with nitric oxide synthase for substrate, L-arginine. Pharmacologic or molecular approaches targeting specific isoforms of arginase represent a promising strategy in treating obstructive fibroproliferative vascular disease.

  16. Heat treatment device for extending the life of a pressure vessel, particularly a reactor pressure vessel

    International Nuclear Information System (INIS)

    Krauss, P.; Mueller, E.; Poerner, H.; Weber, R.

    1979-01-01

    A support body in the form of an insulating cylinder is tightly sealed by connected surfaces at its outer circumference to the inner wall of the pressure vessel. It forms an annular heating space. The heat treatment or tempering of the pressure vessel takes place with the reactor space empty and screened from the outside by ceiling bolts. Heating gas or an induction winding can be used as the means of heating. (DG) [de

  17. Report of the DHS National Small Vessel Security Summit

    National Research Council Canada - National Science Library

    Brownstein, Charles; Baker, John; Hull, Peter; Minogue, Nicholas; Murphy, George; Winston, Phyllis

    2007-01-01

    The purpose of the National Small Vessel Security Summit (NSVSS) was to engage private, commercial and government stakeholders in discussions on a range of issues involving the security risks posed by small vessels in the U.S...

  18. Report of the DHS Small Vessel Security Institute

    National Research Council Canada - National Science Library

    Brownstein, Charles; Baker, John; Hull, Peter; Minogue, Nicholas; Murphy, George; Winston, Phyllis

    2007-01-01

    The purpose of the National Small Vessel Security Summit (NSVSS) was to engage private, commercial and government stakeholders in discussions on a range of issues involving the security risks posed by small vessels in the U.S...

  19. Chemical Safety Alert: Rupture Hazard of Pressure Vessels

    Science.gov (United States)

    Pressure vessels or boilers can fail catastrophically if they are not properly designed, constructed, operated, inspected, tested, or repaired. Risk increases if vessels contents are toxic, corrosive, reactive, or flammable.

  20. Liquid metal systems development: reactor vessel support structure evaluation

    International Nuclear Information System (INIS)

    McEdwards, J.A.

    1981-01-01

    Results of an evaluation of support structures for the reactor vessel are reported. The U ring, box ring, integral ring, tee ring and tangential beam supports were investigated. The U ring is the recommended vessel support structure configuration

  1. 33 CFR 157.450 - Maneuvering and vessel status information.

    Science.gov (United States)

    2010-07-01

    ... SECURITY (CONTINUED) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT RELATING TO TANK VESSELS CARRYING OIL IN BULK Interim Measures for Certain Tank Vessels Without Double Hulls Carrying Petroleum Oils...

  2. 33 CFR 157.310 - Exempted vessels: operations.

    Science.gov (United States)

    2010-07-01

    ..., operator, and master of each vessel that has been granted an exemption under this subpart must ensure that... (e) The letter under § 157.306 that grants the exemption is on board the vessel; or (f) The...

  3. Investigation of impulsively loaded pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.; Cornwell, R.; Hanner, D.; Leichter, H.; Mohr, P.

    1963-10-15

    Explosion containment vessels for containing from 2,000 to 3,000 five ton nuclear explosions are considered. Analysis methods appear adequate and lowest weights using the most advanced materials available in the next five years are projected.None of these materials can be fabricated today and all require extensive development. Present material technology limits the choice of materials and defines the weight. The addition of safety factors and fixtures (nozzles, etc.) will add to this weight considerably, and may well radically alter the vessel response. Improvements in the strength weight ratios of metals and glasses over those considered in this report do not appear reasonable at this time. Winding schemes to utilize the high strength of steel wires and somehow maintain a reasonable thickness appear to offer the most promise. A `ductile` beryllium would of course offer vast improvement, but no indications that this is being developed have appeared and all presently known beryllium is much too brittle.

  4. Vacuum vessel for a nuclear fusion device

    International Nuclear Information System (INIS)

    Watanabe, Takashi; Sato, Hiroshi; Owada, Koro.

    1976-01-01

    Object: To provide a reinforcing member on a bellows portion to reduce a stress at the bellows portion thereby increasing the strength of a vessel. Structure: A vacuum vessel for a nuclear fusion device has a bellows portion and a wall thick portion. A support extended toward the bellows portion is secured inside of a toroidal section in order to reduce the stress at the bellows portion. An insulator is interposed between the support and the bellows portion and is retained on the support by a bolt. Since the stress may be reduced by the support, the wall thick of the bellows portion may be decreased to sufficiently secure the low electric resistance value. (Yoshihara, H.)

  5. Status of the ITER vacuum vessel construction

    Energy Technology Data Exchange (ETDEWEB)

    Choi, C.H.; Sborchia, C.; Ioki, K.; Giraud, B.; Utin, Yu.; Sa, J.W. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Wang, X., E-mail: xiaoyuwww@gmail.com [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Teissier, P.; Martinez, J.M.; Le Barbier, R.; Jun, C.; Dani, S.; Barabash, V.; Vertongen, P.; Alekseev, A. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Jucker, P.; Bayon, A. [F4E, c/ Josep Pla, n. 2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Pathak, H.; Raval, J. [ITER-India, IPR, A-29, Electronics Estate, GIDC, Sector-25, Gandhinagar 382025 (India); Ahn, H.J. [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); and others

    2014-10-15

    Highlights: • Final design of the ITER vacuum vessel (VV). • Procurement of the ITER VV. • Manufacturing results of real scale mock-ups. • Manufacturing status of the VV in domestic agencies. - Abstract: The ITER vacuum vessel (VV) is under manufacturing by four domestic agencies after completion of engineering designs that have been approved by the Agreed Notified Body (ANB). Manufacturing designs of the VV have been being completed, component by component, by accommodating requirements of the RCC-MR 2007 edition. Manufacturing of the VV first sector has been started in February 2012 in Korea and in-wall shielding in May 2013 in India. EU will start manufacturing of its first sector from September 2013 and Russia the upper port by the end of 2013. All DAs have manufactured several mock-ups including real-size ones to justify/qualify and establish manufacturing techniques and procedures.

  6. Irradiation embrittlement of pressure vessel steels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Vacek, M.

    1975-01-01

    A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

  7. TMI-2 reactor vessel head removal

    International Nuclear Information System (INIS)

    Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

    1984-12-01

    This report describes the safe removal and storage of the Three Mile Island Unit 2 reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training the head was safely removed and stored and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

  8. Results of steel containment vessel model test

    International Nuclear Information System (INIS)

    Luk, V.K.; Ludwigsen, J.S.; Hessheimer, M.F.; Komine, Kuniaki; Matsumoto, Tomoyuki; Costello, J.F.

    1998-05-01

    A series of static overpressurization tests of scale models of nuclear containment structures is being conducted by Sandia National Laboratories for the Nuclear Power Engineering Corporation of Japan and the US Nuclear Regulatory Commission. Two tests are being conducted: (1) a test of a model of a steel containment vessel (SCV) and (2) a test of a model of a prestressed concrete containment vessel (PCCV). This paper summarizes the conduct of the high pressure pneumatic test of the SCV model and the results of that test. Results of this test are summarized and are compared with pretest predictions performed by the sponsoring organizations and others who participated in a blind pretest prediction effort. Questions raised by this comparison are identified and plans for posttest analysis are discussed

  9. Autonomous radiation monitoring of small vessels

    International Nuclear Information System (INIS)

    Ziock, K.P.; Cheriyadat, A.; Fabris, L.; Goddard, J.; Hornback, D.; Karnowski, T.; Kerekes, R.; Newby, J.

    2011-01-01

    Small private vessels are one avenue by which nuclear materials may be smuggled across international borders. While one can contemplate using the land-based approach of radiation portal monitors on the navigable waterways that lead to many ports, these systems are ill-suited to the problem. In contrast to roadways, where lanes segregate vehicles, and motion is well controlled by inspection booths; channels, inlets, and rivers present chaotic traffic patterns populated by vessels of all sizes. A unique solution to this problem is based on a portal-less portal monitor designed to handle free-flowing traffic on roadways with up to five-traffic lanes. The instrument uses a combination of visible-light and gamma-ray imaging to acquire and link radiation images to individual vehicles. This paper presents the results of a recent test of the system in a maritime setting.

  10. Vessel-guided airway tree segmentation

    DEFF Research Database (Denmark)

    Lo, Pechin Chien Pau; Sporring, Jon; Ashraf, Haseem

    2010-01-01

    method is evaluated on 250 low dose computed tomography images from a lung cancer screening trial. Our experiments showed that applying the region growing algorithm on the airway appearance model produces more complete airway segmentations, leading to on average 20% longer trees, and 50% less leakage......This paper presents a method for airway tree segmentation that uses a combination of a trained airway appearance model, vessel and airway orientation information, and region growing. We propose a voxel classification approach for the appearance model, which uses a classifier that is trained...... to differentiate between airway and non-airway voxels. This is in contrast to previous works that use either intensity alone or hand crafted models of airway appearance. We show that the appearance model can be trained with a set of easily acquired, incomplete, airway tree segmentations. A vessel orientation...

  11. TMI-2 reactor vessel head removal

    International Nuclear Information System (INIS)

    Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

    1985-09-01

    This report describes the safe removal and storage of the Three Mile Island Unit 2 (TMI-2) reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training, the head was safely removed and stored; and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

  12. Computing the partial volume of pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Wiencke, Bent [Nestle USA, Corporate Engineering, 800 N. Brand Blvd, Glendale, CA 91203 (United States)

    2010-06-15

    The computation of the partial and total volume of pressure vessels with various type of head profiles requires detailed knowledge of the head profile geometry. Depending on the type of head profile the derivation of the equations can become very complex and the calculation process cumbersome. Certain head profiles require numerical methods to obtain the partial volume, which for most application is beyond the scope of practicability. This paper suggests a unique method that simplifies the calculation procedure for the various types of head profiles by using one common set of equations without the need for numerical or complex computation methods. For ease of use, all equations presented in this paper are summarized in a single table format for horizontal and vertical vessels. (author)

  13. TMI-2 reactor vessel head removal

    Energy Technology Data Exchange (ETDEWEB)

    Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

    1985-09-01

    This report describes the safe removal and storage of the Three Mile Island Unit 2 (TMI-2) reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training, the head was safely removed and stored; and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities.

  14. TMI-2 reactor vessel head removal

    Energy Technology Data Exchange (ETDEWEB)

    Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

    1984-12-01

    This report describes the safe removal and storage of the Three Mile Island Unit 2 reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training the head was safely removed and stored and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities.

  15. Starting procedure for internal combustion vessels

    Science.gov (United States)

    Harris, Harry A.

    1978-09-26

    A vertical vessel, having a low bed of broken material, having included combustible material, is initially ignited by a plurality of ignitors spaced over the surface of the bed, by adding fresh, broken material onto the bed to buildup the bed to its operating depth and then passing a combustible mixture of gas upwardly through the material, at a rate to prevent back-firing of the gas, while air and recycled gas is passed through the bed to thereby heat the material and commence the desired laterally uniform combustion in the bed. The procedure permits precise control of the air and gaseous fuel mixtures and material rates, and permits the use of the process equipment designed for continuous operation of the vessel.

  16. Nonlinear Control of Marine Surface Vessels

    Science.gov (United States)

    Das, Swarup; Talole, S. E.

    2018-03-01

    In the present study, a robust yaw control law design derived from nonlinear extended state observer (NESO) based nonlinear state error feedback controller (NSEFC) in conjunction with nonlinear tracking differentiator (NTD) for marine surface vessels is presented. As marine vessel operates in an environment where significant uncertainties and disturbances are present, an NESO is used to estimate the effect of the uncertainties and disturbances along with the plant states leading to a robust design through disturbance estimation and compensation. Convergence of NESO and NTD is demonstrated. The notable feature of the formulation is that to achieve robustness, accurate plant model or any characterization of the uncertainties and disturbances is not needed. Efficacy of the design is illustrated by simulation. Further, performance of the proposed design is compared with some existing controllers to showcase the effectiveness of the proposed design.

  17. Recent experience reactor pressure vessel manufacture

    International Nuclear Information System (INIS)

    Vignes, A.

    1985-01-01

    This paper present the Framatome's recent experience in the manufacture of 1300 MWe PWR vessels; one shows how the very high standards of quality have been obtained to meet the stringent requirements. After a description of a pressure vessel, materials and forgings properties are presented. The nature and sequence of the main fabrication operations are reviewed. This paper deals after with the quality of welds, the preheating and post-heating equipment, the submerged arc welding process and procedures, the cladding process, and the under-clad cracking problems. Ultrasonic inspection procedures of the main welds are described with a comparison of RCCM (design and construction rules for mechanical components of PWR units) and Sizewell B specifications. Support of data on the reproductibility and effectiveness of ultrasonic examination and on the reliability given by repetitive inspection are presented

  18. Stud bolt handling equipment for reactor vessel

    International Nuclear Information System (INIS)

    Bunyan, T.W.

    1989-01-01

    Reactor vessel stud bolt handling equipment includes means for transferring a stud bolt to a carrier from a parking station, or vice versa. Preferably a number of stud bolts are handled simultaneously. The transfer means may include cross arms rotatable about extendable columns, and the equipment is mounted on a mobile base for movement into and out of position. Each carrier comprises a tubular socket and an expandable sleeve to grip a stud bolt. (author)

  19. Stress analysis of large pressure vessels

    International Nuclear Information System (INIS)

    Jeanes, P.; King, S.; Wright, M.B.

    1981-01-01

    Five spherical vessels were investigated in this study. Each model had approximately 2,500 20-node solid elements and 12,000 grid points. Three finite element method computer programs were used, MSC/NASTRAN, BERSAFE and FEMALE. The general approach to the problem, the approach to structural modelling, including the shell and nozzles, the stress analysis and the processing of the results are summarized. (U.K.)

  20. Blood vessels, circulation and blood pressure.

    Science.gov (United States)

    Hendry, Charles; Farley, Alistair; McLafferty, Ella

    This article, which forms part of the life sciences series, describes the vessels of the body's blood and lymphatic circulatory systems. Blood pressure and its regulatory systems are examined. The causes and management of hypertension are also explored. It is important that nurses and other healthcare professionals understand the various mechanisms involved in the regulation of blood pressure to prevent high blood pressure or ameliorate its damaging consequences.

  1. Composite Pressure Vessel Including Crack Arresting Barrier

    Science.gov (United States)

    DeLay, Thomas K. (Inventor)

    2013-01-01

    A pressure vessel includes a ported fitting having an annular flange formed on an end thereof and a tank that envelopes the annular flange. A crack arresting barrier is bonded to and forming a lining of the tank within the outer surface thereof. The crack arresting barrier includes a cured resin having a post-curing ductility rating of at least approximately 60% through the cured resin, and further includes randomly-oriented fibers positioned in and throughout the cured resin.

  2. Mandrels For Microtextured Small-Vessel Implants

    Science.gov (United States)

    Deininger, William D.; Gabriel, Stephen B.

    1989-01-01

    Research shows artificial blood-vessel and heart-valve implants made more compatible with their biological environments by use of regularly microtextured surfaces. In new manufacturing process, ion beam etches patterned array of small pillars on mandrel used to mold tubular plastic implant. Pillars create tiny regularly spaced holes in inner surface of tube. Holes expected to provide sites for attachment of healthy lining. Polytetrafluoroethylene (PTFE) used as mandrel material because it can be etched by ion beam.

  3. 46 CFR 296.21 - Participating Fleet Vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Participating Fleet Vessels. 296.21 Section 296.21... OPERATORS MARITIME SECURITY PROGRAM (MSP) Priority for Granting Applications § 296.21 Participating Fleet... priority, tank vessels, in § 296.20, the second priority is applicable to Participating Fleet Vessels. (b...

  4. 46 CFR 90.10-16 - Industrial vessel.

    Science.gov (United States)

    2010-10-01

    ... PROVISIONS Definition of Terms Used in This Subchapter § 90.10-16 Industrial vessel. This term means every vessel which by reason of its special outfit, purpose, design, or function engages in certain industrial... 46 Shipping 4 2010-10-01 2010-10-01 false Industrial vessel. 90.10-16 Section 90.10-16 Shipping...

  5. 46 CFR 154.1864 - Vessel speed within speed reduction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vessel speed within speed reduction. 154.1864 Section... Vessel speed within speed reduction. The master shall ensure that the speed of the vessel is not greater than the posted speed reduction. ...

  6. 46 CFR 115.812 - Pressure vessels and boilers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pressure vessels and boilers. 115.812 Section 115.812... CERTIFICATION Material Inspections § 115.812 Pressure vessels and boilers. (a) Pressure vessels must be tested... testing requirements for boilers are contained in § 61.05 in subchapter F of this chapter. [CGD 85-080, 61...

  7. 46 CFR 197.462 - Pressure vessels and pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure vessels and pressure piping. 197.462 Section... Diving Equipment § 197.462 Pressure vessels and pressure piping. (a) The diving supervisor shall ensure that each pressure vessel, including each volume tank, cylinder and PVHO, and each pressure piping...

  8. 46 CFR 58.60-3 - Pressure vessel.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Pressure vessel. 58.60-3 Section 58.60-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND... Pressure vessel. A pressure vessel that is a component in an industrial system under this subpart must meet...

  9. 46 CFR 111.105-45 - Vessels carrying agricultural products.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Vessels carrying agricultural products. 111.105-45... ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-45 Vessels carrying agricultural products. (a) The following areas are Class II, Division 1, (Zone 10 or Z) locations on vessels...

  10. 46 CFR 308.1 - Eligibility for vessel insurance.

    Science.gov (United States)

    2010-10-01

    ... for sport fishing. (b) Any vessel, other than a vessel described in paragraph (a) of this section determined by the Maritime Administrator to be engaged in the national defense or the national economy of the... national defense or the national economy of the United States. Vessels in this category are not eligible...

  11. 50 CFR 300.130 - Vessel and gear restrictions.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Vessel and gear restrictions. 300.130... gear restrictions. (a) Factory vessels. Factory vessels are prohibited from operating in treaty waters... top of the trap that, when removed, will leave an opening no smaller than the throat or entrance of...

  12. Temperature uniformity during hyperthermia: the impact of large vessels

    NARCIS (Netherlands)

    Crezee, J.; Lagendijk, J. J.

    1992-01-01

    During hyperthermia the presence of a large vessel entering the heated volume and carrying blood at the systemic temperature can be an important source of temperature non-uniformity and possible underdosage. The minimal tumour temperature near a large vessel is determined by the vessel wall

  13. 46 CFR 111.105-35 - Vessels carrying coal.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Vessels carrying coal. 111.105-35 Section 111.105-35...-GENERAL REQUIREMENTS Hazardous Locations § 111.105-35 Vessels carrying coal. (a) The following are Class II, Division 1, (Zone 10 or Z) locations on a vessel that carries coal: (1) The interior of each coal...

  14. NET in-vessel vehicle system

    International Nuclear Information System (INIS)

    Jones, H.

    1991-02-01

    The CFFTP/Spar In-vessel Vehicle System concept for in-vessel remote maintenance of the NET/ITER machine is described. It comprises a curved deployable boom, a vehicle which can travel on the boom and an end effector or work unit mounted on the vehicle. The stowed boom, vehicle, and work unit are inserted via the equatorial access port of the torus. Following insertion the boom is deployed and locked in place. The vehicle may then travel along the boom to transport the work unit to any desired location. A novel feature of the concept is the deployable boom. When fully deployed, it closely resembles a conventional curved truss structure in configuration and characteristics. However, the joints of the truss structure are hinged so that it can fold into a compact package, of less than 20% of deployed volume for storage, transportation and insertion into the torus. A full-scale 2-metre long section of this boom was produced for demonstration purposes. As part of the concept definition the work unit for divertor handling was studied to demonstrate that large payloads could be manipulated within the confines of the torus using the in-vessel vehicle system. Principal advantages of the IVVS are its high load capacity and rigidity, low weight and stowed volume, simplicity of control and operation, and its relatively high speed of transportation

  15. Nondestructive examination requirements for PWR vessel internals

    International Nuclear Information System (INIS)

    Spanner, J.

    2015-01-01

    This paper describes the requirements for the nondestructive examination of pressurized water reactor (PWR) vessel internals in accordance with the requirements of the EPRI Material Reliability Program (MRP) inspection standard for PWR internals (MRP-228) and the American Society of Mechanical Engineers Section XI In-service Inspection. The MRP vessel internals examinations have been performed at nuclear plants in the USA since 2009. The objective of the inspection standard is to provide the requirements for the nondestructive examination (NDE) methods implemented to support the inspection and evaluation of the internals. The inspection standard contains requirements specific to the inspection methodologies involved as well as requirements for qualification of the NDE procedures, equipment and personnel used to perform the vessel internals inspections. The qualification requirements for the NDE systems will be summarized. Six PWR plants in the USA have completed inspections of their internals using the Inspection and Evaluation Guideline (MRP-227) and the Inspection Standard (MRP-228). Examination results show few instances of service-induced degradation flaws, as expected. The few instances of degradation have mostly occurred in bolting

  16. BWR vessel and internals project (BWRVIP)

    International Nuclear Information System (INIS)

    Bilanin, W.J.; Dyle, R.L.

    1996-01-01

    Recent Boiling Water Reactor (BWR) inspections indicate that Intergranular Stress Corrosion Cracking (IGSCC) is a significant technical issue for some BWR internals. IN response, the Boiling Water Reactor Vessel and Internals Project (BWRVIP) was formed by an associated of domestic and international utilities which own and operate BWRs. The project is identifying or developing generic, cost-effective strategies for managing degradation of reactor internals from which each utility can select the alternative most appropriate for their plant. The Electric Power Research Institute manages the technical program, implementing the utility defined programs. The BWRVIP is organized into four technical tasks: Assessment, Inspection, Repair and Mitigation. An Integration task coordinates the work. The goal of the Assessment task is to develop methodologies for evaluation of vessel and internal components in support of decisions for operation, inspection, mitigation or repair. The goal of the Inspection task is to develop and assess effective and predictable inspection techniques which can be used to determine the condition of BWR vessel and internals that are potentially susceptible to service-related SCC degradation. The goal of the Repair task is to assure the availability of cost-effective repair/replacement alternatives. The goal of the Mitigation task is to develop and demonstrate countermeasures for SCC degradation. This paper summarizes the BWRVIP approach for addressing BWR internals SCC degradation and illustrates how utilities are utilizing BWRVIP products to successfully manage the effect of SCC on core shrouds

  17. Cooling of pressurized water nuclear reactor vessels

    International Nuclear Information System (INIS)

    Curet, H.D.

    1978-01-01

    The improvement of pressurized water nuclear reactor vessels comprising flow dividers providing separate and distinct passages for the flow of core coolant water from each coolant water inlet, the flow dividers being vertically disposed in the annular flow areas provided by the walls of the vessel, the thermal shield (if present), and the core barrel is described. In the event of rupture of one of the coolant water inlet lines, water, especially emergency core coolant water, in the intact lines is thus prevented from by-passing the core by circumferential flow around the outermost surface of the core barrel and is instead directed so as to flow vertically downward through the annulus area between the vessel wall and the core barrel in a more normal manner to increase the probability of cooling of the core by the available cooling water in the lower plenum, thus preventing or delaying thermal damage to the core, and providing time for other appropriate remedial or damage preventing action by the operator

  18. Hypercholesterolemia induced cerebral small vessel disease.

    Science.gov (United States)

    Kraft, Peter; Schuhmann, Michael K; Garz, Cornelia; Jandke, Solveig; Urlaub, Daniela; Mencl, Stine; Zernecke, Alma; Heinze, Hans-Jochen; Carare, Roxana O; Kleinschnitz, Christoph; Schreiber, Stefanie

    2017-01-01

    While hypercholesterolemia plays a causative role for the development of ischemic stroke in large vessels, its significance for cerebral small vessel disease (CSVD) remains unclear. We thus aimed to understand the detailed relationship between hypercholesterolemia and CSVD using the well described Ldlr-/- mouse model. We used Ldlr-/- mice (n = 16) and wild-type (WT) mice (n = 15) at the age of 6 and 12 months. Ldlr-/- mice develop high plasma cholesterol levels following a high fat diet. We analyzed cerebral capillaries and arterioles for intravascular erythrocyte accumulations, thrombotic vessel occlusions, blood-brain barrier (BBB) dysfunction and microbleeds. We found a significant increase in the number of erythrocyte stases in 6 months old Ldlr-/- mice compared to all other groups (P hypercholesterolemia is related to a thrombotic CSVD phenotype, which is different from hypertension-related CSVD that associates with a hemorrhagic CSVD phenotype. Our data demonstrate a relationship between hypercholesterolemia and the development of CSVD. Ldlr-/- mice appear to be an adequate animal model for research into CSVD.

  19. Thermal ratcheting in pressure vessels and piping

    International Nuclear Information System (INIS)

    Kalnins, A.; Updike, D.P.

    1975-01-01

    During its lifetime, a nuclear power plant can experience cyclic thermal loading produced during start-ups and shut-downs. Under such conditions, pressure vessels, piping and other components can experience accumulative dimensional changes through thermal ratcheting. Such dimensional changes can occur when cyclic thermal loading is superposed upon steady mechanical loading. Simplified models based on one-dimensional plastic stress-strain relations, as proposed by Miller, Bree and Burgreen, are currently used by designers to estimate the likelihood and the amount of ratcheting during the life of the component. It is shown in this paper that the Miller-Bree-Burgreen one-dimensional model is applicable when the ratio of the steady membrane stresses is larger than one-half (Nsub(y)/Nsub(x)>1/2), which includes such significant applications as cylindrical and spherical vessels under internal pressure. For the stress ratios approaching minus one, the biaxial model predicts much higher ratchet strain. Examples where such states occur are the knuckle region in pressure vessels with torispherical heads and pipe connections under torsion. Designers should be alerted to such a limitation of the presently used ratcheting model. (Auth.)

  20. Code boiler and pressure vessel life assessment

    International Nuclear Information System (INIS)

    Farr, J.R.

    1992-01-01

    In the United States of America and in Canada, laws and controls for determining life assessment for continued operation of equipment exist only for those pressure vessels built to Section III and evaluated according to Section XI. In this presentation, some of those considerations which are made in the USA and Canada for deciding on life or condition assessment of boilers and pressure vessels designed and constructed to other sections of the ASME Boiler and Pressure Vessel Code are reviewed. Life assessment or condition assesssment is essential in determining what is necessary for continued operation. With no ASME rules being adopted by laws or regulations, other than OSHA in the USA and similar environmental controls in Canada, to control life assessment for continued operation, the equipment owner must decide if assessment is to be done and how much to do. Some of those considerations are reviewed along with methods and procedures to make an assessment along with a discussion of where the ASME B and PV Code currently stands regarding continued operation. (orig.)

  1. Development of prestressed concrete containment vessels

    International Nuclear Information System (INIS)

    Yuji, Hideo; Kuniyoshi, Mutsumu; Nagata, Kaoru

    1983-01-01

    This paper presents a summary of evaluations for the selection of the structural and prestressing system type to be employed for the first domestic Prestressed Concrete Containment Vessel (PCCV) in Japan. This paper also discusses characteristic features in the design of the liner plate system provided on the PCCV inner surface to assure its leak-tight integrity. Prestressed concrete containment vessels so far constructed in foreign countries are to a considerable extent of different structural types, depending on differences in dome shapes, prestressing systems and number of buttresses. These differences are caused not only by differences in design philosophy and construction practices, but also by difference in the level of technology of the times when the individual containment vessels are being constructed. In the investigation reported herein, the most suitable types of PCCV and Prestressing Systems were determined as the results of an overall comparative evaluation of data and information obtained from PCCV's so far constructed from the design, construction and cost aspects, taking into consideration the seismic criteria, available technology, construction practices, regulations and technical standards in Japan. The function of the liner plate system requires the liner to have enough deformability so that the liner deformation can be consistent with the PCCV concrete deformation. Therefore, in the design of the liner plate system a method for evaluating liner deformability was employed, instead of the stress evaluation method which is widely used in the design of ordinary structures. (author)

  2. Inservice inspection of Halden BWR pressure vessel

    International Nuclear Information System (INIS)

    Foerli, O.; Hernes, T.

    1978-01-01

    A description is given of how the recertification inspection of the 20 years old Halden Reactor pressure vessel was carried out in accordance with the latest ASME-CODES, despite the fact that inspection accessibility was poor. As no volumetric inspection had been carried out since the preservice radiography in 1957, the ultrasonic inspection included the high flux region of all welds. In total 70% of longitudinal welds and 20% of bottom circumferential welds were inspected as well as the bottom nozzle connection. The vessel was not designed with provisions for inservice inspection, the welds are unaccessible from the outside and removal of the lid is virtually impossible. The ultrasonic probes could only be loaded through 77 mm diameter holes in the top lid and remotely positioned inside the vessel. The inspection was performed using 450C and 60OC 1 MHz angle probes and 2.25 MHz normal probes in immersion technique. In a zone around the welds, small regions with lack of bonding between the stainless steel cladding and the boiler steel were revealed. One root defect known and accepted from the preservice radiographs was examined. The defect was found to be 6x30mm as a maximum and well within acceptable limits according to the fracture mechanics analysis method recommended in ASME X1. The inspection required a period of three weeks' work in the reactor hall. (UK)

  3. ITER Vacuum Vessel design and construction

    Energy Technology Data Exchange (ETDEWEB)

    Ioki, K., E-mail: Kimihiro.Ioki@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Jones, L. [F4E, c/Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Jun, C. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Kim, B.C. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Kuzmin, E. [NTC ' Sintez' , Efremov Inst., 189631 Metallostroy, St. Petersburg (Russian Federation); Le Barbier, R.; Martinez, J.-M. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Pathak, H. [ITER-India, A-29, GIDC Electronic Estate, Sector -25, Gandhinagar 382025 (India); Preble, J.; Reich, J. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Sa, J.W. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Terasawa, A.; Utin, Yu. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); and others

    2012-08-15

    After implementing a few design modifications (referred to as the 'Modified Reference Design') in 2009, the Vacuum Vessel (VV) design had been stabilized. The VV design is being finalized, including interface components such as support rails and feedthroughs for the in-vessel coils. It is necessary to make adjustments to the locations of the blanket supports and manifolds to accommodate design modifications to the in-vessel coils. The VV support design is also being finalized considering a structural simplification. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. The detailed layout of ferritic steel plates and borated steel plates was optimized based on the toroidal field ripple analysis. A dynamic test on the inter-modular key to support the blanket modules was performed to measure the dynamic amplification factor (DAF). An R and D program has started to select and qualify the welding and cutting processes for the port flange lip seal. The ITER VV material 316 L(N) IG was already qualified and the Modified Reference Design was approved by the Agreed Notified Body (ANB) in accordance with the Nuclear Pressure Equipment Order procedure.

  4. Serotonin, atherosclerosis, and collateral vessel spasm

    Science.gov (United States)

    Hollenberg, N.

    1988-01-01

    Studies on animal models demonstrate that platelet products contribute to vascular spasm in ischemic syndromes and that this is reversible with administration of ketanserin and thromboxane synthesis inhibitors. Laboratory animals (dogs, rabbits, and rats) that had femoral artery ligations exhibited supersensitivity to serotonin within days in their collateral blood vessels. This supersensitivity lasted at least 6 months. The response to serotonin was reversed by ketanserin, but not by 5HT-1 antagonists. Supersensitivity does not extend to norepinephrine, and alpha blockers do not influence the response to serotonin. It appears that platelet activation by endothelial injury contributes to ischemia through blood vessel occlusion and vascular spasm. When platelet activation occurs in vivo, blood vessel occlusion and vascular spasm are reversible in part by using ketanserin or agents that block thromboxane synthesis or its action. Combining both classes of agents reverses spasm completely. These findings support existing evidence that platelet products contribute to vascular disease, and provide an approach to improved management with currently available pharmacologic agents.

  5. Processing vessel for high level radioactive wastes

    International Nuclear Information System (INIS)

    Maekawa, Hiromichi

    1998-01-01

    Upon transferring an overpack having canisters containing high level radioactive wastes sealed therein and burying it into an underground processing hole, an outer shell vessel comprising a steel plate to be fit and contained in the processing hole is formed. A bury-back layer made of dug earth and sand which had been discharged upon forming the processing hole is formed on the inner circumferential wall of the outer shell vessel. A buffer layer having a predetermined thickness is formed on the inner side of the bury-back layer, and the overpack is contained in the hollow portion surrounded by the layer. The opened upper portion of the hollow portion is covered with the buffer layer and the bury-back layer. Since the processing vessel having a shielding performance previously formed on the ground, the state of packing can be observed. In addition, since an operator can directly operates upon transportation and burying of the high level radioactive wastes, remote control is no more necessary. (T.M.)

  6. Nuclear reactor pressure vessel support system

    Science.gov (United States)

    Sepelak, George R.

    1978-01-01

    A support system for nuclear reactor pressure vessels which can withstand all possible combinations of stresses caused by a postulated core disrupting accident during reactor operation. The nuclear reactor pressure vessel is provided with a flange around the upper periphery thereof, and the flange includes an annular vertical extension formed integral therewith. A support ring is positioned atop of the support ledge and the flange vertical extension, and is bolted to both members. The plug riser is secured to the flange vertical extension and to the top of a radially outwardly extension of the rotatable plug. This system eliminates one joint through which fluids contained in the vessel could escape by making the fluid flow path through the joint between the flange and the support ring follow the same path through which fluid could escape through the plug risers. In this manner, the sealing means to prohibit the escape of contained fluids through the plug risers can also prohibit the escape of contained fluid through the securing joint.

  7. Demystifying the use of internal mammary vessels as recipient vessels in free flap breast reconstruction.

    Science.gov (United States)

    Chang, Eric I; Chang, Edward I; Soto-Miranda, Miguel A; Nosrati, Naveed; Robb, Geoffrey L; Chang, David W

    2013-10-01

    The internal mammary vessels are commonly used as primary recipient vessels for free flap breast reconstruction. However, there is debate about the reliability of the left internal mammary vein. The authors explored the anatomy of the internal mammary vessels as revealed during free flap breast reconstruction to determine whether microvascular complications differed between the left and right sides. All free flap breast reconstructions performed using internal mammary recipient vessels at the authors' institution between January of 2000 and December of 2010 were reviewed. The authors compared left and right breast reconstructions for internal mammary vessel diameters and microvascular complications, pedicle thrombosis, and total flap losses. Overall, 1773 free flap breast reconstructions were performed in 1336 patients using the internal mammary vessels: 899 unilateral and 437 bilateral. The left side was used in 904 cases and the right side in 869 cases. Although the mean sizes of the left and right internal mammary arteries (2.44 and 2.47 mm, respectively) did not differ significantly, the left vein was significantly smaller than the right vein (2.47 mm versus 2.93 mm; p = 0.038). The overall rate of venous thrombosis was significantly higher on the left than on the right (3.0 percent versus 2.3 percent; p = 0.028). The rates of flap loss in left and right breast reconstructions did not differ significantly (1.9 percent versus 2.2 percent). Although the left internal mammary vein is smaller than the right and is at higher risk for venous complications, it remains an acceptable recipient vessel for free flap breast reconstruction. Therapeutic, III.

  8. In-vessel core debris retention through external flooding of the reactor pressure vessel. State-of-the-art report

    International Nuclear Information System (INIS)

    Heel, A.M.J.M. van.

    1995-07-01

    An overview of the state-of-the-art knowledge on the ex-vessel flooding accident management strategy for severe accidents in a NPP has been given. The feasibility has been discussed, as well as the in- and ex-vessel phenomena, which influence the structural integrity of the vessel. Finally, some computer codes with the ability to model the phenomena involved in ex-vessel flooding have been discussed. (orig./HP)

  9. In-vessel core debris retention through external flooding of the reactor pressure vessel. State-of-the-art report

    Energy Technology Data Exchange (ETDEWEB)

    Heel, A.M.J.M. van

    1995-07-01

    An overview of the state-of-the-art knowledge on the ex-vessel flooding accident management strategy for severe accidents in a NPP has been given. The feasibility has been discussed, as well as the in- and ex-vessel phenomena, which influence the structural integrity of the vessel. Finally, some computer codes with the ability to model the phenomena involved in ex-vessel flooding have been discussed. (orig./HP).

  10. Histomorphological changes of vessel structure in head and neck vessels following preoperative or postoperative radiotherapy

    International Nuclear Information System (INIS)

    Schultze-Mosgau, S.; Wehrhan, F.; Wiltfang, J.; Grabenbauer, G.G.; Sauer, R.; Roedel, F.; Radespiel-Troeger, M.

    2002-01-01

    Patients and Methods: In 348 patients (October 1995-March 2002) receiving primarly or secondarily 356 microvascular hard- and soft tissue reconstruction, a total of 209 vessels were obtained from neck recipient vessels and transplant vessels during anastomosis. Three groups were analysed: group 1 (27 patients) treated with no radiotherapy or chemotherapy; group 2 (29 patients) treated with preoperative irradiation (40-50 Gy) and chemotherapy (800 mg/m 2 /day 5-FU and 20 mg/m 2 /day cisplatin) 1.5 months prior to surgery; group 3 (20 patients) treated with radiotherapy (60-70 Gy) (median interval 78.7 months; IQR: 31.3 months) prior to surgery. From each of the 209 vessel specimens, 3 sections were investigated histomorphometrically, qualitatively and quantitatively (ratio media area/total vessel area) by NIH-Image-digitized measurements. To evaluate these changes as a function of age, radiation dose and chemotherapy, a statistical analysis was performed using an analysis of covariance and χ 2 tests (p > 0.05, SPSS V10). Results: In group 3, qualitative changes (intima dehiscence, hyalinosis) were found in recipient arteries significantly more frequently than in groups 1 and 2. For group 3 recipient arteries, histomorphometry revealed a significant decrease in the ratio media area/total vessel area (median 0.51, IQR 0.10) in comparison with groups 1 (p = 0.02) (median 0.61, IQR 0.29) and 2 (p = 0.046) (median 0.58, IQR 0.19). No significant difference was found between the vessels of groups 1 and 2 (p = 0.48). There were no significant differences in transplant arteries and recipient or transplant veins between the groups. Age and chemotherapy did not appear to have a significant influence on vessel changes in this study (p > 0.05). Conclusions: Following irradiation with 60-70 Gy, significant qualitative and quantitative histological changes to the recipient arteries, but not to the recipient veins, could be observed. In contrast, irradiation at a dose of 40-50 Gy

  11. Inspection apparatus for a vessel made of magnetic metal

    International Nuclear Information System (INIS)

    Clark, J.P.; Foster, A.C.; Smith, T.D.

    1976-01-01

    Previous systems intended for in-situ inspection of the pressure vessels of nuclear reactors are of uneasy use on encumbered surfaces. Said invention relates to a remote-control device for inspecting vessel walls. It comprises a conveyor able to be propelled, possibly around obstacles, towards any place inside the vessel; said vehicle is provided with magnetic wheels driven by an electric motor and separately controlled. The conveyor is accurately located on the vessel by using an acoustic device involving a triangular method, and consisting in an acoustic signal emitter mounted on the conveyor and at least three receiving transducers mounted on the vessel wall [fr

  12. Violent video games and the Supreme Court: lessons for the scientific community in the wake of Brown v. Entertainment Merchants Association.

    Science.gov (United States)

    Ferguson, Christopher J

    2013-01-01

    In June 2011 the U.S. Supreme Court ruled that video games enjoy full free speech protections and that the regulation of violent game sales to minors is unconstitutional. The Supreme Court also referred to psychological research on violent video games as "unpersuasive" and noted that such research contains many methodological flaws. Recent reviews in many scholarly journals have come to similar conclusions, although much debate continues. Given past statements by the American Psychological Association linking video game and media violence with aggression, the Supreme Court ruling, particularly its critique of the science, is likely to be shocking and disappointing to some psychologists. One possible outcome is that the psychological community may increase the conclusiveness of their statements linking violent games to harm as a form of defensive reaction. However, in this article the author argues that the psychological community would be better served by reflecting on this research and considering whether the scientific process failed by permitting and even encouraging statements about video game violence that exceeded the data or ignored conflicting data. Although it is likely that debates on this issue will continue, a move toward caution and conservatism as well as increased dialogue between scholars on opposing sides of this debate will be necessary to restore scientific credibility. The current article reviews the involvement of the psychological science community in the Brown v. Entertainment Merchants Association case and suggests that it might learn from some of the errors in this case for the future. (c) 2013 APA, all rights reserved.

  13. The passive biomechanics of human pelvic collecting lymphatic vessels.

    Directory of Open Access Journals (Sweden)

    Dimitrios Athanasiou

    Full Text Available The lymphatic system has a major significance in the metastatic pathways in women's cancers. Lymphatic pumping depends on both extrinsic and intrinsic mechanisms, and the mechanical behavior of lymphatic vessels regulates the function of the system. However, data on the mechanical properties and function of human lymphatics are lacking. Our aim is to characterize, for the first time, the passive biomechanical behavior of human collecting lymphatic vessels removed at pelvic lymph node dissection during primary debulking surgeries for epithelial ovarian cancer. Isolated vessels were cannulated and then pressurized at varying levels of applied axial stretch in a calcium-free Krebs buffer. Pressurized vessels were then imaged using multi-photon microscopy for collagen-elastin structural composition and fiber orientation. Both pressure-diameter and force-elongation responses were highly nonlinear, and axial stretching of the vessel served to decrease diameter at constant pressure. Pressure-diameter behavior for the human vessels is very similar to data from rat mesenteric vessels, though the human vessels were approximately 10× larger than those from rats. Multiphoton microscopy revealed the vessels to be composed of an inner layer of elastin with an outer layer of aligned collagen fibers. This is the first study that successfully described the passive biomechanical response and composition of human lymphatic vessels in patients with ovarian cancer. Future work should expand on this knowledge base with investigations of vessels from other anatomical locations, contractile behavior, and the implications on metastatic cell transport.

  14. Confinement Vessel Assay System: Calibration and Certification Report

    Energy Technology Data Exchange (ETDEWEB)

    Frame, Katherine C. [Los Alamos National Laboratory; Bourne, Mark M. [Los Alamos National Laboratory; Crooks, William J. [Los Alamos National Laboratory; Evans, Louise [Los Alamos National Laboratory; Gomez, Cipriano [Retired CMR-OPS: OPERATIONS; Mayo, Douglas R. [Los Alamos National Laboratory; Miko, David K. [Los Alamos National Laboratory; Salazar, William R. [Los Alamos National Laboratory; Stange, Sy [Los Alamos National Laboratory; Vigil, Georgiana M. [Los Alamos National Laboratory

    2012-07-17

    Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1 to 2 inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the vessels. The Confinement Vessel Assay System (CVAS) was developed to measure the amount of SNM in CVs before and after cleanout. Prior to cleanout, the system will be used to perform a verification measurement of each vessel. After cleanout, the system will be used to perform safeguards-quality assays of {le} 100-g {sup 239}Pu equivalent in a vessel for safeguards termination. The system was calibrated in three different mass regions (low, medium, and high) to cover the entire plutonium mass range that will be assayed. The low mass calibration and medium mass calibration were verified for material positioned in the center of an empty vessel. The systematic uncertainty due to position bias was estimated using an MCNPX model to simulate the response of the system to material localized at various points along the inner surface of the vessel. The background component due to cosmic ray spallation was determined by performing measurements of an empty vessel and comparing to measurements in the same location with no vessel present. The CVAS has been tested and calibrated in preparation for verification and safeguards measurements of CVs before and after cleanout.

  15. Vessel calibration for accurate material accountancy at RRP

    International Nuclear Information System (INIS)

    Yanagisawa, Yuu; Ono, Sawako; Iwamoto, Tomonori

    2004-01-01

    RRP has a 800t·Upr capacity a year to re-process, where would be handled a large amount of nuclear materials as solution. A large scale plant like RRP will require accurate materials accountancy system, so that the vessel calibration with high-precision is very important as initial vessel calibration before operation. In order to obtain the calibration curve, it is needed well-known each the increment volume related with liquid height. Then we performed at least 2 or 3 times run with water for vessel calibration and careful evaluation for the calibration data should be needed. We performed vessel calibration overall 210 vessels, and the calibration of 81 vessels including IAT and OAT were held under presence of JSGO and IAEA inspectors taking into account importance on the material accountancy. This paper describes outline of the initial vessel calibration and calibration results based on back pressure measurement with dip tubes. (author)

  16. Temperature measurements on a HSLA-100 steel confinement vessel

    Energy Technology Data Exchange (ETDEWEB)

    Lohsen, R.A.

    1998-05-07

    Temperature measurements have been made on HSLA-100 steel confinement vessel number 6-2-3-1. These measurements are intended to give a view of the vessel temperature response under conditions similar to operational conditions, starting from worst case. The vessel`s temperature must be above the minimum operating temperature when used to contain an explosive event to ensure that the vessel material has the desired crack arrest properties. Several series of temperature measurements have been conducted over 24 and 48 hour periods during February 1998. These tests were intended to demonstrate that after running the heaters in the environmental shelter for some time, (1) the vessel warms up to temperatures well above the minimum operating temperature, (2) that through-thickness temperature gradients are negligible, and (3) that the temperature differences from one part of the vessel to another are small.

  17. Method for temporary shielding of reactor vessel internals

    International Nuclear Information System (INIS)

    Grimm, N.P.; Sejvar, J.

    1991-01-01

    This patent describes a method for shielding stored internals for reactor vessel annealing. It comprises removing nuclear fuel from the reactor vessel containment building; removing and storing upper and lower core internals under water in a refueling canal storage area; assembling a support structure in the refueling canal between the reactor vessel and the stored internals; introducing vertical shielding tanks individually through a hatch in the containment building and positioning each into the support structure; introducing horizontal shielding tanks individually through a hatch in the containment building and positioning each above the stored internals and vertical tanks; draining water from the refueling canal to the level of a flange of the reactor vessel; placing an annealing apparatus in the reactor vessel; pumping the remaining water from the reactor vessel; and annealing the reactor vessel

  18. A thermal insulation system intended for a prestressed concrete vessel

    International Nuclear Information System (INIS)

    Aubert, Gilles; Petit, Guy.

    1975-01-01

    The description is given of a thermal insulation system withstanding the pressure of a vaporisable fluid for a prestressed concrete vessel, particularly the vessel of a boiling water nuclear reactor. The ring in the lower part of the vessel has, between the fluid inlet pipes and the bottom of the vessel, an annular opening of which the bottom edge is integral with an annular part rising inside the ring and parallel to it. This ring is hermetically connected to the bottom of the vessel and is coated with a metal lagging, at least facing the annular opening. This annular opening is made in the ring half-way up between the fluid inlet pipes and the bottom of the vessel. It is connected to the bottom of the vessel through the internal structure enveloping the reactor core [fr

  19. Support device in a pressure vessel, particularly a reactor pressure vessel, to support against horizontal forces

    International Nuclear Information System (INIS)

    Dorner, H.; Harand, E.; Scholz, M.; Scheler, R.

    1986-01-01

    In a support device on a reactor pressure vessel of a PWR, a guide leading downwards is provided in the vertical pellet cartridge on the floor side of the reactor pressure vessel, which is located in a fixed support pipe. The support pipe is supported on a concreted baseplate in the horizontal direction, and can be screwed to this. The support pipe has a plate-shaped support foot to support it on the baseplate. The reactor pressure vessel, normally resting on its main coolant duct in the plane normal to the axis, can be effectively supported against horizontal forces by this additional support, without preventing thermal movement in the longitudinal axis. (orig./HP) [de

  20. Potential for AP600 in-vessel retention through ex-vessel flooding

    Energy Technology Data Exchange (ETDEWEB)

    Rempe, J.L.; Knudson, D.L.; Allison, C.M.; Thinnes, G.L.; Atwood, C.L.

    1997-12-01

    External reactor vessel cooling (ERVC) is a new severe accident management strategy that involves flooding the reactor cavity to submerge the reactor vessel in an attempt to cool core debris that has relocated to the vessel lower head. Advanced and existing light water reactors (LWRs) are considering ERVC as an accident management strategy for in-vessel retention (IVR) of relocated debris. In the probabilistic risk assessment (PRA) for the AP600 design, Westinghouse credits ERVC for preventing vessel failure during postulated severe accidents with successful reactor coolant system (RCS) depressurization and reactor cavity flooding. To support the Westinghouse position on IVR, DOE contracted the University of California--Santa Barbara (UCSB) to produce the peer-reviewed report. To assist in the NRC`s evaluation of IVR of core melt by ex-vessel flooding of the AP6OO, the Idaho National Engineering and Environmental Laboratory (INEEL) was tasked to perform: An in-depth critical review of the UCSB study and the model that UCSB used to assess ERVC effectiveness; An in-depth review of the UCSB study peer review comments and of UCSB`s resolution method to identify areas where technical concerns weren`t addressed; and An independent analysis effort to investigate the impact of residual concerns on the margins to failure and conclusions presented in the UCSB study. This report summarizes results from these tasks. As discussed in Sections 1.1 and 1.2, INEEL`s review of the UCSB study and peer reviewer comments suggested that additional analysis was needed to assess: (1) the integral impact of peer reviewer-suggested changes to input assumptions and uncertainties and (2) the challenge present by other credible debris configurations. Section 1.3 summarized the corresponding analysis approach developed by INEEL. The remainder of this report provides more detailed descriptions of analysis methodology, input assumptions, and results.

  1. Maritime Training Serbian Autonomous Vessel Protection Detachment

    Directory of Open Access Journals (Sweden)

    Šoškić Svetislav D.

    2014-06-01

    Full Text Available The crisis in Somalia has caused appearance of piracy at sea in the Gulf of Aden and the Western Indian Ocean. Somali pirates have become a threat to economic security of the world because almost 30 percent of world oil and 20 percent of global trade passes through the Gulf of Aden. Solving the problem of piracy in this part of the world have included international organizations, institutions, military alliances and the states, acting in accordance with international law and UN Security Council resolutions. The European Union will demonstrate the application of a comprehensive approach to solving the problem of piracy at sea and the crisis in Somalia conducting naval operation — EU NAVFOR Atalanta and operation EUTM under the Common Security and Defense Policy. The paper discusses approaches to solving the problem of piracy in the Gulf of Aden and the crisis in Somalia. Also, the paper points to the complexity of the crisis in Somalia and dilemmas correctness principles that are applied to solve the problem piracy at sea. One of goals is protections of vessels of the World Food Programme (WFP delivering food aid to displaced persons in Somalia. Republic of Serbia joined in this mission and trained and sent one a autonomous team in this military operation for protection WFP. This paper consist the problem of modern piracy, particularly in the area of the Horn of Africa became a real threat for the safety of maritime ships and educational process of Serbian Autonomous vessel protection detachment. Serbian Military Academy adopted and developed educational a training program against piracy applying all the provisions and recommendations of the IMO conventions and IMO model courses for Serbian Autonomous vessel protection detachment.

  2. Limit analysis and design of containment vessels

    International Nuclear Information System (INIS)

    Save, M.

    1984-01-01

    In the introduction, the theory of plastic analysis of shells is briefly recalled. Minimum-volume design for assigned load factor at plastic collapse is then considered and optimality criteria are derived for plates and shells of continuously varying or piecewise-constant thickness. In the first part, containers made of metal are examined. Analytical and numerical limit analysis solutions and corresponding experimental results are considered for various types of vessels, including intersecting shells. Attention is given to experimental post-yield behavior. Some tests up to fracture are discussed. New theoretical and experimental results of limit analysis of stiffened cylindrical vessels are presented, in which reinforcing rings are treated as discrete structural element (no smearing out) and due account is taken of their strong curvature. Cases of collapse by instability under internal pressure are pointed out. Minimum-volume design of circular plates and cylindrical shells is then formulated and various examples are presented of sandwich and solid metal structures. Containers of piecewise-constant thickness are given particular attention. Available experimental evidence on minimum-volume design of plates and shells is reviewed and commented upon. The second part deals with reinforced concrete vessels. Cylindrical containers are studied, from both points of view of limit analysis and of limit design with minimum volume of reinforcement. The practical use of the latter solutions is discussed. A third part reviews other loading cases (including cyclic and impact loads) and gives indications on corresponding theories, formulations and solution methods. The last part is devoted to a discussion of the limitations of the methods presented, within the frame of the 'limit states' design philosophy, which is first briefly recalled. Considerations on further research in the field conclude the paper. (orig.)

  3. Compact insert design for cryogenic pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Aceves, Salvador M.; Ledesma-Orozco, Elias Rigoberto; Espinosa-Loza, Francisco; Petitpas, Guillaume; Switzer, Vernon A.

    2017-06-14

    A pressure vessel apparatus for cryogenic capable storage of hydrogen or other cryogenic gases at high pressure includes an insert with a parallel inlet duct, a perpendicular inlet duct connected to the parallel inlet. The perpendicular inlet duct and the parallel inlet duct connect the interior cavity with the external components. The insert also includes a parallel outlet duct and a perpendicular outlet duct connected to the parallel outlet duct. The perpendicular outlet duct and the parallel outlet duct connect the interior cavity with the external components.

  4. Dictionary of pressure vessel and piping technology

    International Nuclear Information System (INIS)

    Jentgen, L.; Schmitz, H.P.

    1986-01-01

    A specialised dictionary has been compiled containing the appropriate English and German terms in the following technical fields: materials science, welding, destructive and non-destructive testing, thermal and mass transfer, the design and construction in particular of pressure vessels, tanks, heat exchangers, piping, expansion joints, valves, and components associated with the above fields. This dictionary is the result of many years spent in evaluating technical terminology from the relevant American and British regulations, technical rules, standards, and specifications (see bibliography) and correlating these with the terminology of comparable German regulations, rules and standards, together with the essential technical literature. (orig.) [de

  5. Reactor vessel closure head replacements in 1997

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The Framatome-Jeumont Industrie consortium have completed in 1997 28 reactor vessel (RV) closure head replacements, including five on 1300 MWe class PWR units. Framatome manages the operations and handles removal and reinstallation of equipment (not including the control rod drive mechanisms (CRDM)) and the requalification tests, while JI, which manufactures the CRDMs, is involved in the CRDM cutting, re-machining and welding operations, using tools of original design, in order to optimize the RV closure head operation in terms of costs, schedule and dosage

  6. Hereditary cerebral small vessel disease and stroke

    DEFF Research Database (Denmark)

    Søndergaard, Christian Baastrup; Nielsen, Jørgen Erik; Hansen, Christine Krarup

    2017-01-01

    disturbances. Some also present with extra-cerebral manifestations such as microangiopathy of the eyes and kidneys. Many present with clinically recognizable syndromes. Investigations include a thorough family medical history, medical history, neurological examination, neuroimaging, often supplemented...... by specific examinations e.g of the of vision, retinal changes, as well as kidney and heart function. However molecular genetic analysis is the final gold standard of diagnosis. There are increasing numbers of reports on new monogenic syndromes causing cerebral small vessel disease. Genetic counseling...

  7. Welding of structural components and vessels

    International Nuclear Information System (INIS)

    1989-01-01

    'Welding of structural components and vessels' was chosen as the guiding topic for the 17th special conference in Munich so that current problems of this important area of application for welding engineering could be discussed in detail. The following topics were in the focus of the discussions: developments in steel, steel production and steel processing, reports on the practical application of welding in the manufacture of containers and pipes, quality assurance, product liability, safety considerations regarding creep-stressed components, problems of welding in large structures. 7 of the total number of 12 contributions were recorded separately for the data base ENERGY. (orig./MM) [de

  8. Underwater noise from offshore oil production vessels.

    Science.gov (United States)

    Erbe, Christine; McCauley, Robert; McPherson, Craig; Gavrilov, Alexander

    2013-06-01

    Underwater acoustic recordings of six Floating Production Storage and Offloading (FPSO) vessels moored off Western Australia are presented. Monopole source spectra were computed for use in environmental impact assessments of underwater noise. Given that operations on the FPSOs varied over the period of recording, and were sometimes unknown, the authors present a statistical approach to noise level estimation. No significant or consistent aspect dependence was found for the six FPSOs. Noise levels did not scale with FPSO size or power. The 5th, 50th (median), and 95th percentile source levels (broadband, 20 to 2500 Hz) were 188, 181, and 173 dB re 1 μPa @ 1 m, respectively.

  9. Reactor pressure vessel aging and countermeasures

    International Nuclear Information System (INIS)

    Leitz, C.

    1987-01-01

    The considerable aging effect on reactor pressure vessels is the effect of irradiation on material properties in the core beltline region. Modern LWRs in the Federal Republic of Germany are designed such that irradiation effects are very low. Countermeasures applicable separately or in combination for plants with higher than normally expected irradiation effects are described in three steps: first, examinations and calculations to extend the formal reactor lifetime by reducing over-conservative margins; second, changes in core design to reduce future irradiation effects; third, a procedure to recover irradiation effect on material properties already sustained. (orig./HP) [de

  10. Reliability analysis of reactor pressure vessel intensity

    International Nuclear Information System (INIS)

    Zheng Liangang; Lu Yongbo

    2012-01-01

    This paper performs the reliability analysis of reactor pressure vessel (RPV) with ANSYS. The analysis method include direct Monte Carlo Simulation method, Latin Hypercube Sampling, central composite design and Box-Behnken Matrix design. The RPV integrity reliability under given input condition is proposed. The result shows that the effects on the RPV base material reliability are internal press, allowable basic stress and elasticity modulus of base material in descending order, and the effects on the bolt reliability are allowable basic stress of bolt material, preload of bolt and internal press in descending order. (authors)

  11. Innovations in prestressed concrete pressure vessel design

    International Nuclear Information System (INIS)

    Chow, P.Y.; Ngo, D.; Lin, T.Y.

    1979-01-01

    The study explored a new approach to the design of a high-pressure PCPV that accepts tension and tension cracks in the outer region of the PCPV. It examined the possibility of incorporating artificially-introduced preformed separations that pre-determined crack locations in the design as a method of controlling high tensile stresses generated by internal temperature and pressure. The results showed that the PCPV so designed was, in the extreme case of the DSV, approximately 70% cheaper than the 18 steel vessels of equivalent capacity it replaces. (orig.)

  12. Reactor Pressure Vessel (RPV) Acquisition Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Mizia, Ronald Eugene [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2008-04-01

    The Department of Energy has selected the High Temperature Gas-cooled Reactor design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production. It will have an outlet gas temperature in the range of 900°C and a plant design service life of 60 years. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed reactor and use low-enriched uranium, TRISO-coated fuel. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Materials Research and Development (R&D) Program is responsible for performing R&D on likely NGNP materials in support of the NGNP design, licensing, and construction activities. Selection of the technology and design configuration for the NGNP must consider both the cost and risk profiles to ensure that the demonstration plant establishes a sound foundation for future commercial deployments. The NGNP challenge is to achieve a significant advancement in nuclear technology while at the same time setting the stage for an economically viable deployment of the new technology in the commercial sector soon after 2020. The purpose of this report is to address the acquisition strategy for the NGNP Reactor Pressure Vessel (RPV). This component will be larger than any nuclear reactor pressure vessel presently in service in the United States. The RPV will be taller, larger in diameter, thicker walled, heavier and most likely fabricated at the Idaho National Laboratory (INL) site of multiple subcomponent pieces. The pressure vessel steel can either be a conventional materials already used in the nuclear industry such as listed within ASME A508/A533 specifications or it will be fabricated from newer pressure vessel materials never before used for a nuclear reactor in the US. Each of these characteristics will present a

  13. Using Seasonal Forecasting Data for Vessel Routing

    Science.gov (United States)

    Bell, Ray; Kirtman, Ben

    2017-04-01

    We present an assessment of seasonal forecasting of surface wind speed, significant wave height and ocean surface current speed in the North Pacific for potential use of vessel routing from Singapore to San Diego. WaveWatchIII is forced with surface winds and ocean surface currents from the Community Climate System Model 4 (CCSM4) retrospective forecasts for the period of 1982-2015. Several lead time forecasts are used from zero months to six months resulting in 2,720 model years, ensuring the findings from this study are robust. July surface wind speed and significant wave height can be skillfully forecast with a one month lead time, with the western North Pacific being the most predictable region. Beyond May initial conditions (lead time of two months) the El Niño Southern Oscillation (ENSO) Spring predictability barrier limits skill of significant wave height but there is skill for surface wind speed with January initial conditions (lead time of six months). In a separate study of vessel routing between Norfolk, Virginia and Gibraltar we demonstrate the benefit of a multimodel approach using the North American Multimodel Ensemble (NMME). In collaboration with Charles River Analytics an all-encompassing forecast is presented by using machine learning on the various ensembles which can be using used for industry applications.

  14. Safety of steel vessel Magnox pressure circuits

    International Nuclear Information System (INIS)

    Stokoe, T.Y.; Bolton, C.J.; Heffer, P.J.H.

    1991-01-01

    The maintenance of pressure circuit integrity is fundamental to nuclear safety at the steel vessel Magnox stations. To confirm continued pressure circuit integrity the CEGB, as part of the Long Term Safety Review, has carried out extensive assessment and inspection in recent years. The assessment methods and inspection techniques employed are based on the most modern available. Reactor pressure vessel integrity is confirmed by a combination of arguments including safety factors inferred from the successful pre-service overpressure test, leak-before-break analysis and probabilistic assessment. In the case of other parts of the pressure circuits that are more accessible, comprising the boiler shells and interconnecting gas duct work, in-service inspection is a major element of the safety substantiation. The assessment and inspection techniques and the materials property data have been underpinned for many years by extensive research and development programmes and in-reactor monitoring of representative samples has also been undertaken. The paper summarises the work carried out to demonstrate the long term integrity of the Magnox pressure circuits and provides examples of the results obtained. (author)

  15. Leak detector for reactor pressure vessel

    International Nuclear Information System (INIS)

    Morimoto, Mikio.

    1991-01-01

    A branched pipe is disposed to a leak off pipeline led from a flange surface which connects the main body and the upper lid of a reactor pressure vessel. An exhaust pump is disposed to the branched pipe and a moisture gage is disposed on the side of the exhaustion and a dry air supplier is connected to the branched pipe. Upon conducting a pressure-proof leak test for the reactor pressure vessel, the exhaust pump is operated and an electromagnet valve disposed at the upstream of the dry air supplier is opened and closed repeatedly. The humidity of air sucked by the exhaust pump is detected by the moisture gage. If leaks should be caused in the joining surface of the flange, leaked water is diffused as steams. Accordingly, occurrence of leak can be detected instantly based on the comparison with the moisture level of the dry air as a standard. In this way, a leak test can be conducted reliably in a short period of time with no change of for the reactor pressure container itself. (I.N.)

  16. Analisa Greenwater Akibat Gerakan Offshore Security Vessel

    Directory of Open Access Journals (Sweden)

    Maulidya Octaviani Bustamin

    2012-09-01

    Full Text Available Analisa  Tugas  Akhir  ini,  terdiri  atas  beberapa  tahapan.  Yang pertama yaitu perancangan struktur Offshore Security Vessel (OSV dengan bantuan software MAXSURF guna mendapatkan Lines Plan. Offset data yang diperoleh digunakan dalam pemodelan menggunakan MOSES,  kemudian  dilakukan  analisa  gerak  OSV  dalam  gelombang  regular  dan dinyatakan dalam grafik RAO. Analisa gerak relatif vertikal  haluan dihitung dari RAO gerakan, dan kemudian melakukan evaluasi perilaku di gelombang acak dengan analisis spektra gelombang. Dari analisa spektra didapatkan parameter greenwater sehingga dapat dihitung peluang, intensitas dan tekanan greenwater. Dari hasil analisa diperoleh RAO gerak vertikal Offshore Security Vessel (OSV pada  gelombang  reguler yang dipengaruhi  oleh  kecepatan,  kondisi  muatan  dan arah gelombang. Peluang terjadinya greenwater terbesar terjadi pada sudut datang gelombang following sea (0o dimana harga terbesar terjadi pada ω = 0.2 rad/sec dengan periode 29 detik mencapai 0.477. Intensitas greenwater terbesar terjadi pada saat sudut datang gelombang following sea (0o adalah sebanyak 59.265 per jam dan 0.378 per detik. Tekanan greenwater terbesar terjadi pada saat sudut datang gelombang head sea (180o sebesar 1678x10-6 MPa. Dengan nilai tersebut, deck mampu menahan beban akibat tekanan greenwater.

  17. DETECTING VESSELS CARRYING MIGRANTS USING MACHINE LEARNING

    Directory of Open Access Journals (Sweden)

    A. Sfyridis

    2017-10-01

    Full Text Available Political instability, conflicts and inequalities result into significant flows of people worldwide, moving to different countries in search of a better life, safety or to be reunited with their families. Irregular crossings into Europe via sea routes, despite not being new, have recently increased together with the loss of lives of people in the attempt to reach EU shores. This highlights the need to find ways to improve the understanding of what is happening at sea. This paper, intends to expand the knowledge available on practices among smugglers and contribute to early warning and maritime situational awareness. By identifying smuggling techniques and based on anomaly detection methods, behaviours of interest are modelled and one class support vector machines are used to classify unlabelled data and detect potential smuggling vessels. Nine vessels are identified as potentially carrying irregular migrants and refugees. Though, further inspection of the results highlights possible misclassifications caused by data gaps and limited knowledge on smuggling tactics. Accepted classifications are considered subject to further investigation by the authorities.

  18. Armed guards on vessels : insurance and liability

    Directory of Open Access Journals (Sweden)

    Mišo Mudrić

    2011-12-01

    Full Text Available The Paper examines the insurance and liability issues resulting from the use of armed guards on board vessels. The study begins with an overview of the available data on key economic fi gures representing the projected overall annual costs of modern piracy. The focus is then shifted to the issue of public versus private security, where possible dangers of private-based security options are discussed in general. After explaining why the Somalia region deserves a closer attention when compared to other pirate-infested waters, a brief summary of the international effort to combat piracy threat is presented, followed by a structured overview of the use of private maritime security options in the maritime sector in general. One security option is the use of armed guards on board vessels. This option is explored both from the political (the acceptance by stakeholders and legal standpoint (legal issues arising from the use of armed guards. An important remedy for the shipping companies/ operators threatened by the piracy hazard is the existence of affordable and effective (specialized marine insurance. A study of available piracy insurance policies is presented, followed by an analysis of case law and other legal issues arising from piracy attacks, which could prove important when considering the legal implications of armed guards employment. Finally, a simplifi ed economic analysis of available security options is presented, followed by the final assessment of benefi ts derived from the use of armed guards.

  19. Zircaloy welding in OPAL reactor reflector vessel

    International Nuclear Information System (INIS)

    Ortiz, L.; Martinez, R.

    2006-01-01

    Full text: Full text: This paper describes the development of the Zircaloy 4 welding processes applied in the fabrication of the Reflector Vessel for the OPAL reactor. As an introduction, a brief description is made of the geometric design of the Reflector Vessel, which is very complex, as it has many irradiation positions, beams tubes, channels, outer connections, and reinforcements. The complexity of this component demanded different welded joints and a careful manufacturing sequence, which comprised welding, machining, heat treatments, and quality control operations. Design and fabrication of different ad-hoc devices was also required, some of which are described in the present paper. For the purposes of issuing reliable welding procedures, the joints were previously set up through tests using samples and mock-ups. Procedures and welders were qualified in accordance with the ASME Code, Section IX. The welding methods used in the fabrication were GTAW (Gas Tungsten Arc Welding) and PAW (Plasma Arc Welding), processes deemed adequate to weld these alloys, as they do not contaminate the material, for they are carried out within an inert gas atmosphere. Contrary to other welding methods commonly used for other materials, no welding fluxes or chemically-active gases are applied in these two processes. The advantages of both methods used are discussed. The welds were carried out in manual, orbital, or mechanized mode depending on the type of joint

  20. Detecting Vessels Carrying Migrants Using Machine Learning

    Science.gov (United States)

    Sfyridis, A.; Cheng, T.; Vespe, M.

    2017-10-01

    Political instability, conflicts and inequalities result into significant flows of people worldwide, moving to different countries in search of a better life, safety or to be reunited with their families. Irregular crossings into Europe via sea routes, despite not being new, have recently increased together with the loss of lives of people in the attempt to reach EU shores. This highlights the need to find ways to improve the understanding of what is happening at sea. This paper, intends to expand the knowledge available on practices among smugglers and contribute to early warning and maritime situational awareness. By identifying smuggling techniques and based on anomaly detection methods, behaviours of interest are modelled and one class support vector machines are used to classify unlabelled data and detect potential smuggling vessels. Nine vessels are identified as potentially carrying irregular migrants and refugees. Though, further inspection of the results highlights possible misclassifications caused by data gaps and limited knowledge on smuggling tactics. Accepted classifications are considered subject to further investigation by the authorities.

  1. Autonomous Radiation Monitoring of Small Vessels

    International Nuclear Information System (INIS)

    Fabris, Lorenzo; Hornback, Donald Eric

    2010-01-01

    Small private vessels are one avenue by which nuclear materials may be smuggled across international borders. While one can contemplate using the terrestrial approach of radiation portal monitors on the navigable waterways that lead to many ports, these systems are ill-suited to the problem. They require vehicles to pass at slow speeds between two closely-spaced radiation sensors, relying on the uniformity of vehicle sizes to space the detectors, and on proximity to link an individual vehicle to its radiation signature. In contrast to roadways where lanes segregate vehicles, and motion is well controlled by inspection booths; channels, inlets, and rivers present chaotic traffic patterns populated by vessels of all sizes. We have developed a unique solution to this problem based on our portal-less portal monitor instrument that is designed to handle free-flowing traffic on roadways with up to five-traffic lanes. The instrument uses a combination of visible-light and gamma-ray imaging to acquire and link radiation images to individual vehicles. It was recently tested in a maritime setting. In this paper we present the instrument, how it functions, and the results of the recent tests.

  2. Pool critical assembly pressure vessel facility benchmark

    International Nuclear Information System (INIS)

    Remec, I.; Kam, F.B.K.

    1997-07-01

    This pool critical assembly (PCA) pressure vessel wall facility benchmark (PCA benchmark) is described and analyzed in this report. Analysis of the PCA benchmark can be used for partial fulfillment of the requirements for the qualification of the methodology for pressure vessel neutron fluence calculations, as required by the US Nuclear Regulatory Commission regulatory guide DG-1053. Section 1 of this report describes the PCA benchmark and provides all data necessary for the benchmark analysis. The measured quantities, to be compared with the calculated values, are the equivalent fission fluxes. In Section 2 the analysis of the PCA benchmark is described. Calculations with the computer code DORT, based on the discrete-ordinates method, were performed for three ENDF/B-VI-based multigroup libraries: BUGLE-93, SAILOR-95, and BUGLE-96. An excellent agreement of the calculated (C) and measures (M) equivalent fission fluxes was obtained. The arithmetic average C/M for all the dosimeters (total of 31) was 0.93 ± 0.03 and 0.92 ± 0.03 for the SAILOR-95 and BUGLE-96 libraries, respectively. The average C/M ratio, obtained with the BUGLE-93 library, for the 28 measurements was 0.93 ± 0.03 (the neptunium measurements in the water and air regions were overpredicted and excluded from the average). No systematic decrease in the C/M ratios with increasing distance from the core was observed for any of the libraries used

  3. Axial vessel widening in arborescent monocots.

    Science.gov (United States)

    Petit, Giai; DeClerck, Fabrice A J; Carrer, Marco; Anfodillo, Tommaso

    2014-02-01

    Dicotyledons have evolved a strategy to compensate for the increase in hydraulic resistance to water transport with height growth by widening xylem conduits downwards. In monocots, the accumulation of hydraulic resistance with height should be similar, but the absence of secondary growth represents a strong limitation for the maintenance of xylem hydraulic efficiency during ontogeny. The hydraulic architecture of monocots has been studied but it is unclear how monocots arrange their axial vascular structure during ontogeny to compensate for increases in height. We measured the vessel lumina and estimated the hydraulic diameter (Dh) at different heights along the stem of two arborescent monocots, Bactris gasipaes (Kunth) and Guadua angustifolia (Kunth). For the former, we also estimated the variation in Dh along the leaf rachis. Hydraulic diameter increased basally from the stem apex to the base with a scaling exponent (b) in the range of those reported for dicot trees (b = 0.22 in B. gasipaes; b = 0.31 and 0.23 in G. angustifolia). In B. gasipaes, vessels decrease in Dh from the stem's centre towards the periphery, an opposite pattern compared with dicot trees. Along the leaf rachis, a pattern of increasing Dh basally was also found (b = 0.13). The hydraulic design of the monocots studied revealed an axial pattern of xylem conduits similar to those evolved by dicots to compensate and minimize the negative effect of root-to-leaf length on hydrodynamic resistance to water flow.

  4. Feedwater control device for reactor pressure vessels

    International Nuclear Information System (INIS)

    Oonuma, Takeshi.

    1982-01-01

    Purpose: To prevent the generation of thermal stresses at the junction between a clean-up water pipe and a feedwater pipe. Constitution: Hot water containing impurities in a pressure vessel is caused to flow by a recycling pump through a heat exchanger, a cooler and a clean-up desalter and again by way of the heat exchanger into the feedwater pipe at the junction with the clean-up water pipe, where it is mixed with the feedwater passed by way of a feedwater heater and supplied to the pressure vessel. The feedwater temperature for the feedwater pipe and the set temperature for the clean-up water are compared with each other by using temperature sensors disposed to the feedwater pipe between the junction and the feedwater heater at the upstream of the junction. If the temperature difference is increased, for instance, upon transient state where the operation of the feedwater heater is not yet stabilized, the recycling pump is controlled to stop the supply of the clean-up water to the junction while flowing only the feedwater. This makes the temperature distribution uniform and prevents the generation of the thermal stresses at the junction, by which reactor safety can be improved. (Moriyama, K.)

  5. ITER vacuum vessel design and construction

    Energy Technology Data Exchange (ETDEWEB)

    Ioki, K., E-mail: Kimihiro.Ioki@iter.org [ITER Organization, 13108 St. Paul lez Durance (France); Barabash, V.; Bachmann, C.; Chappuis, P.; Choi, C.H.; Cordier, J.-J.; Giraud, B.; Gribov, Y. [ITER Organization, 13108 St. Paul lez Durance (France); Heitzenroeder, Ph. [PPPL - MS 41, Princeton University, PO Box 451, Princeton, NJ 08543 (United States); Johnson, G. [ITER Organization, 13108 St. Paul lez Durance (France); Jones, L. [F4E, c/Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019, Barcelona (Spain); Jun, C. [ITER Organization, 13108 St. Paul lez Durance (France); Kim, B.C. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon, 305-333 (Korea, Republic of); Kuzmin, E. [NTC ' Sintez' , Efremov Inst., 189631 Metallostroy, St. Petersburg (Russian Federation); Loesser, D. [PPPL - MS 41, Princeton University, PO Box 451, Princeton, NJ 08543 (United States); Martin, A.; Martinez, J.-M.; Merola, M. [ITER Organization, 13108 St. Paul lez Durance (France); Pathak, H. [IPR, Near Indira Bridge, Bhat, Gandhinagar 382 428 (India); Readman, P. [ITER Organization, 13108 St. Paul lez Durance (France)

    2010-12-15

    According to recent design review results, the original reference vacuum vessel (VV) design was selected with a number of modifications including 3D shaping of the outboard inner shell. The VV load conditions were updated based on reviews of the plasma disruption and vertical displacement event (VDE) database. The lower port gussets have been reinforced based on structural analysis results, including non-linear buckling. Design of in-vessel coils for the mitigation of edge localized modes (ELM) and plasma vertical stabilization (VS) has progressed. Design of the in-wall-shielding (IWS) has progressed in details. The detailed layout of ferritic steel plates and borated steel plates is optimized based on the toroidal field ripple analysis. The procurement arrangements (PAs) for the VV including ports and IWS have been prepared or signed. Final design reviews were carried out to check readiness for the PA signature. The procedure for licensing the ITER VV according to the French Order on Nuclear Pressure Equipment (ESPN) has started and conformity assessment is being performed by an Agreed Notified Body (ANB). A VV design description document, VV load specification document, hazard and stress analysis reports and particular material appraisal were submitted according to the guideline and RCC-MR requirements.

  6. Reactor pressure vessel structural integrity research

    International Nuclear Information System (INIS)

    Pennell, W.E.; Corwin, W.R.

    1994-01-01

    Development continues on the technology used to assess the safety of irradiation-embrittled nuclear reactor pressure vessels (RPVs) containing flaws. Fracture mechanics tests on RPV steel, coupled with detailed elastic-plastic finite-element analyses of the crack-tip stress fields, have shown that (1) constraint relaxation at the crack tip of shallow surface flaws results in increased data scatter but no increase in the lower-bound fracture toughness, (2) the nil ductility temperature (NDT) performs better than the reference temperature for nil ductility transition (RT NDT ) as a normalizing parameter for shallow-flaw fracture toughness data, (3) biaxial loading can reduce the shallow-flaw fracture toughness, (4) stress-based dual-parameter fracture toughness correlations cannot predict the effect of biaxial loading on shallow-flaw fracture toughness because in-plane stresses at the crack tip are not influenced by biaxial loading, and (5) an implicit strain-based dual-parameter fracture toughness correlation can predict the effect of biaxial loading on shallow-flaw fracture toughness. Experimental irradiation investigations have shown that (1) the irradiation-induced shift in Charpy V-notch vs temperature behavior may not be adequate to conservatively assess fracture toughness shifts due to embrittlement, and (2) the wide global variations of initial chemistry and fracture properties of a nominally uniform material within a pressure vessel may confound accurate integrity assessments that require baseline properties

  7. Internal Mammary Vessels: Alternate Recipient Vessels in Microvascular Head and Neck Reconstruction.

    Science.gov (United States)

    Buck, Paul M; Wax, Mark K; Petrisor, Daniel I

    2016-09-01

    The application of microvascular free tissue transfer for reconstruction of the head and neck is well established. Improved outcomes, as well as surgical and technologic advances, have broadened the applications of microvascular free flaps in these defects. Postoperative complications such as pharyngocutaneous fistulas, tracheal or esophageal stenoses, or recurrent pathology may occasionally require secondary or even tertiary reconstruction with free tissue transfers. The disrupted anatomy and fibrotic changes resulting from primary reconstruction, neck dissection, and irradiation present the surgeon with a high risk of provoking vascular or nervous injury when dissecting in previously operated or irradiated sites. This prompts a search for alternative recipient vessels for microvascular anastomosis. The transverse cervical, inferior thyroid, and thyrocervical trunk arteries have all been proposed as alternative recipient vessels. The internal mammary vessels (IMVs) have a proven record in breast reconstruction, but recently have been found to have an application in special circumstances in head and neck reconstruction. This investigation describes the advantages of the IMVs as suitable recipient vessels for head and neck reconstruction when access to traditional vasculature is unavailable. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  8. Cognitive profiles in degenerative dementia without evidence of small vessel pathology and small vessel vascular dementia.

    Science.gov (United States)

    De Carolis, Antonella; Cipollini, Virginia; Donato, Nicole; Sepe-Monti, Micaela; Orzi, Francesco; Giubilei, Franco

    2017-01-01

    Although a large number of studies have examined possible differences in cognitive performance between Alzheimer's disease (AD) and vascular dementia (VaD), the data in the literature are conflicting. The aims of this study were to analyze the neuropsychological pattern of subjects affected by degenerative dementia without evidence of small vessel pathology (DD) and small vessel VaD subjects in the early stages and to investigate differences in the progression of cognitive impairment. Seventy-five patients with probable VaD and 75 patients with probable DD were included. All the subjects underwent a standard neuropsychological evaluation, including the following test: Visual Search, Attentional matrices, Story Recall, Raven's Coloured Progressive Matrices, Phonological and Semantic Verbal Fluency, Token, and Copying Drawings. The severity of cognitive impairment was stratified according to the MMSE score. Fifteen subjects with probable DD and 10 subjects with probable VaD underwent a 12-month cognitive re-evaluation. No significant difference was found between DD and VaD subjects in any of the neuropsychological tests except Story Recall in the mild cognitive impairment (P Visual Search test (P = 0.036) in VaD subjects. These results suggest that a neuropsychological evaluation might help to differentiate degenerative dementia without evidence of small vessel pathology from small vessel VaD in the early stages of these diseases.

  9. 50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

    Science.gov (United States)

    2010-10-01

    ... procedures indicated on an installation and activation checklist, which is available from OLE; and (2) Submit to OLE a statement certifying compliance with the checklist, as prescribed on the checklist. (c... instructions from that office. If notified by NMFS that a vessel's VMS is not operating properly, the owner and...

  10. 76 FR 59660 - Proposed Information Collection; Comment Request; Permitting, Vessel Identification, and Vessel...

    Science.gov (United States)

    2011-09-27

    ...., Washington, DC 20230 (or via the Internet at [email protected] ). FOR FURTHER INFORMATION CONTACT: Requests for... satellite- based vessel monitoring system (VMS). This collection of information is needed for permit... transmission of paper forms. VMS data are collected electronically and automatically. III. Data OMB Control...

  11. Intraabdominal laparoscopy-assisted "open" vessel ligation of testicular vessels: a potential treatment for varicocele.

    Science.gov (United States)

    Miyano, Go; Miyahara, Katsumi; Halibieke, Abudebieke; Lane, Geoffrey J; Okazaki, Tadaharu; Yamataka, Atsuyuki

    2011-10-01

    We tested our laparoscopy-assisted "open" ligation (LOL) technique on testicular vessels. We ligated the left testicular artery and vein (TAV) in 8-week-old male Wister rats using LOL (LOL group; n=10) or laparotomy (open group; n=10). In LOL, a 0-degree laparoscope was introduced through a 5-mm epigastric trocar. A 3-mm grasper was used to expose the left TAV. A lapa-her-closure (LHC) needle loaded with 3-0 SurgiPro was directly inserted into the left lower quadrant where the left TAV should be and advanced under the vessels, and the suture material was released leaving one end outside. The LHC was then withdrawn a little and advanced again over the vessels to grasp the end of the suture material just released to bring it outside. This was proximally repeated. The two ends of both sutures were conventionally tied outside, and the knot was passed through the insertion site and tightened around the vessels. In the open group, the left TAV were ligated using two 3-0 SurgiPro ties. In both groups, the right side was left intact. All rats were sacrificed 2 weeks postoperatively, and both testes were examined with hematoxylin and eosin. Treatment time was 5-7 minutes for LOL and 7-8 minutes for the open group. Postoperative recovery was uneventful. No adhesions were present between the ligated vessels and bowel in any rat. Histopathology of all left testes showed coagulative necrosis of germinal cells and seminiferous tubules; all right testes were normal. LOL appears to be as effective as open ligation and may find application for treating varicocele.

  12. Systems aspects of reactor pressure vessel integrity: Executive report

    International Nuclear Information System (INIS)

    Ray, N.K.; Beck, R.K.; Wallace, I.W.; Grigsby, J.M.; Sloane, B.D.; Bishop, B.A.

    1993-11-01

    Reactor vessel integrity is affected by the following key issues: Operational heatup and cooldown pressure-temperature limit curves and the associated occurrence of low temperature over pressurization (LTOP); pressurized thermal shock (PTS) events that could lead to crack initiation in the vessel, and irradiation effects, including low upper shelf fracture toughness. Electric Power Research Institute's Embrittlement Management Program is underway to develop methods in assessing reactor vessel integrity issues due to radiation embrittlement. Reactor vessel integrity may be impacted by different aspects including some degradation mechanisms. One of those aspects are the plant system changes associated with the reactor vessel. This report uses the results from various probabilistic analyses performed by Westinghouse and other organizations, to identify those plant systems which are most important to the reactor vessel embrittlement issues

  13. Efficient Vessel Tracking  with Accuracy Guarantees

    DEFF Research Database (Denmark)

    Redoutey, Martin; Scotti, Eric; Jensen, Christian Søndergaard

    2008-01-01

    Safety and security are top concerns in maritime navigation, particularly as maritime traffic continues to grow and as crew sizes are reduced. The Automatic Identification System (AIS) plays a key role in regard to these concerns. This system, whose objective is in part to identify and locate...... vessels, transmits location-related information from vessels to ground stations that are part of a so-called Vessel Traffic Service (VTS), thus enabling these to track the movements of the vessels. This paper presents techniques that improve the existing AIS by offering better and guaranteed tracking...... accuracies at lower communication costs. The techniques employ movement predictions that are shared between vessels and the VTS. Empirical studies with a prototype implementation and real vessel data demonstrate that the techniques are capable of significantly improving the AIS....

  14. Bone marrow blood vessels: normal and neoplastic niche

    Directory of Open Access Journals (Sweden)

    Saeid Shahrabi

    2016-11-01

    Full Text Available Blood vessels are among the most important factors in the transport of materials such as nutrients and oxygen. This study will review the role of blood vessels in normal bone marrow hematopoiesis as well as pathological conditions like leukemia and metastasis. Relevant literature was identified by a Pubmed search (1992-2016 of English-language papers using the terms bone marrow, leukemia, metastasis, and vessel. Given that blood vessels are conduits for the transfer of nutrients, they create a favorable situation for cancer cells and cause their growth and development. On the other hand, blood vessels protect leukemia cells against chemotherapy drugs. Finally, it may be concluded that the vessels are an important factor in the development of malignant diseases.

  15. Rotating wall vessel system designed for fluorescent imaging

    Science.gov (United States)

    Tayag, Tristan J.; Dimitrijevich, S. Dan; Del Gallego, Lauren C.; Kumar, Pankaj

    2011-03-01

    Fluorescent imaging of cells and tissues cultured within a rotating wall vessel bioreactor offers quantitative assessment of the 3-dimensional aggregation of cells into tissue constructs. We present the design of a rotating wall vessel system optimized for real-time fluorescent analysis. The modulation transfer function of our system is found to be superior to the commercially-available vessel used in previous fluorescence imaging studies. We demonstrate dynamic fluorescent imaging of DAPI-stained porcine pancreatic islets.

  16. Segmentation and packaging reactor vessels internals

    International Nuclear Information System (INIS)

    Boucau, Joseph

    2014-01-01

    Document available in abstract form only, full text follows: With more than 25 years of experience in the development of reactor vessel internals and reactor vessel segmentation and packaging technology, Westinghouse has accumulated significant know-how in the reactor dismantling market. The primary challenges of a segmentation and packaging project are to separate the highly activated materials from the less-activated materials and package them into appropriate containers for disposal. Since disposal cost is a key factor, it is important to plan and optimize waste segmentation and packaging. The choice of the optimum cutting technology is also important for a successful project implementation and depends on some specific constraints. Detailed 3-D modeling is the basis for tooling design and provides invaluable support in determining the optimum strategy for component cutting and disposal in waste containers, taking account of the radiological and packaging constraints. The usual method is to start at the end of the process, by evaluating handling of the containers, the waste disposal requirements, what type and size of containers are available for the different disposal options, and working backwards to select a cutting method and finally the cut geometry required. The 3-D models can include intelligent data such as weight, center of gravity, curie content, etc, for each segmented piece, which is very useful when comparing various cutting, handling and packaging options. The detailed 3-D analyses and thorough characterization assessment can draw the attention to material potentially subject to clearance, either directly or after certain period of decay, to allow recycling and further disposal cost reduction. Westinghouse has developed a variety of special cutting and handling tools, support fixtures, service bridges, water filtration systems, video-monitoring systems and customized rigging, all of which are required for a successful reactor vessel internals

  17. Merchants in Florence, Knights under the rule of the kings of Aragon. The Tecchini-Taquí between the 14th and the 15th century

    Directory of Open Access Journals (Sweden)

    Soldani, Maria Elisa

    2009-12-01

    Full Text Available The path of the Tecchinis is a relevant example of a Florentine family’s naturalization in the Catalan-Aragonese kingdoms. In contrast to many of their conationals, the record of Tecchini-Taquí is characterized by their long presence and by establishing a unique integration process, which involved a transgression of social rank from merchants to knights in less then a century. The key to their achievements was double identity and the coexistence of the Tuscan merchant’s typical skills with the involvements of the great mercantile Catalan families. As a result they could cover the role of intermediates between Florentine companies and the local world. The members of this family also made use of a direct and privileged relation with the Crown, established due to the professional services they offered to the monarchs.

    La traiettoria dei Tecchini costituisce un esempio significativo di naturalizzazione di una famiglia fiorentina in ambito catalano-aragonese. I Tecchini- Taquí, al contrario di molti dei loro connazionali, furono caratterizzati da una presenza di lunga durata e dall’avviarsi di un processo d’integrazione che avrebbe comportato, in meno di un secolo, anche un passaggio di status da mercanti a cavalieri. La chiave del loro successo fu la doppia appartenenza, il coesistere delle caratteristiche tipiche del mercante toscano con gli interessi delle grandi famiglie mercantili catalano-aragonesi, che gli consentì di ricoprire il ruolo di mediatori tra compagnie fiorentine e mondo locale. Gli esponenti di questa famiglia si avvalsero anche di un rapporto diretto e privilegiato con la Corona, stretto grazie ai servizi di natura professionale offerti ai monarchi.

  18. How Environmental "Merchants of Doubt" Use Peer-Reviewed Publication as a Means to Commandeer Scientific Debate: A Case Study of a Publishing Problem.

    Science.gov (United States)

    Siegel, D. I.

    2015-12-01

    This year, the USEPA reported no systemic problem with respect to pollution of potable waters by solutes or natural gas resulting from unconventional drilling for oil and gas, despite attempts by anti-fracking opponents to frighten the public about water pollution from rare circumstances (much as those who have cherry- picked climate data to suggest burning fossil fuels does not affect climate). Scientific "merchants of doubt" have figured out how to use peer-reviewed papers to advocate their bias, regardless of the side for which they advocate. I present a personal example. Prior to the EPA report, authors of a highly-cited peer-reviewed paper argued that more dissolved methane than usual should be expected in ground water located close to unconventional gas wells. This paper figured prominently in the New York State's recent ban on fracking. To test the reproducibility of this conclusion, colleagues and I redid the study but by sampling ~13,000 NE Pennsylvania domestic wells, densely arrayed near ~800 gas wells. Not surprising, we found no systemic relationship between methane in drinking water and proximity to gas wells; failed gas wells actually are rare. The peer reviewed system of publication has been broken for years, because of continual pressure to publish more to achieve academic success coupled to a flood of international submissions. Editors routinely have a difficult time finding senior scientists to agree to review papers, and so they wind up relying more on reviewers suggested by authors, who can and have gamed the peer review system through it. To resolve this problem, I suggest that journal editors be more far more draconian before releasing papers for review and that they enforce clear rubrics to insure that reviewers address reviews properly. Finally, conflict of interest disclosure needs to be clearer, since common assumption that bias inherently evolves from funded research outside of Federal and non-profit organizations, appears to be, at

  19. 76 FR 36071 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

    Science.gov (United States)

    2011-06-21

    ... electronic comments in Microsoft Word, Excel, WordPerfect, or Adobe PDF file formats only. Written comments..., Fishing, Fishing vessels, Foreign relations, Imports, Penalties, Reporting and recordkeeping requirements...

  20. Moessbauer Study of Sphero-Conical Vessels from Bolgar

    Science.gov (United States)

    Ivanova, A. G.; Nuretdinova, A. R.; Pyataev, A. V.; Valiulina, S. I.; Voronina, E. V.

    2017-05-01

    Samples of sphero-conical vessels found in mass quantities in the ancient settlement Bolgar were analyzed by Moessbauer spectroscopy. Wares with relatively low annealing temperatures handicraft center.