WorldWideScience

Sample records for menu engineering technique

  1. PENERAPAN TEKNIK PENYUSUNAN MENI DI RESTORAN BENGAWAN SOLO HOTEL SAHID JAYA, JAKARTA [The Aplication of Menu Engineering at Bengawan Solo Restaurant, Sahid Jaya Hotel Jakarta

    Directory of Open Access Journals (Sweden)

    Musa Hubies 1

    2001-08-01

    Full Text Available Menu engineering (ME is a step-by-step process wich is designed to help management in evaluating the current and future menu pricing, menu composition and to set decisions about price and menu. The main objectives of ME are tomake the next menu more profitable and to attract of guest’s attention. It has two critical aspect, that are contribution margin/CM (related to profit and menu mix/MM (related to an item popularity rate amoing other item. The combination of CM and MM wll result in an item classification (star, plowhorse, question and dog, so that management can design the decision alternatives related to menu item.From the ME application for four months, Bengawan Solo Restaurant has 10 star item menu, 13 qustion items, 2 plowhorse items and 9 dog items. In this case, selling technique performed by waiters and waitresses also influence the ME result. The menegement concerns about the physical presentation and kitchen location. The quality handling should not only be conducted physically, but also pay more attention to halal aspect and food safety or HACCP (hazard analysis and certical control point, in order to produce high quality product that are safe to be consumed.

  2. PENERAPAN TEKNIK PENYUSUNAN MENI DI RESTORAN BENGAWAN SOLO HOTEL SAHID JAYA, JAKARTA [The Aplication of Menu Engineering at Bengawan Solo Restaurant, Sahid Jaya Hotel Jakarta

    OpenAIRE

    Musa Hubies 1); Sindi Astu Banuhapsari 2)

    2001-01-01

    Menu engineering (ME) is a step-by-step process wich is designed to help management in evaluating the current and future menu pricing, menu composition and to set decisions about price and menu. The main objectives of ME are tomake the next menu more profitable and to attract of guest’s attention. It has two critical aspect, that are contribution margin/CM (related to profit) and menu mix/MM (related to an item popularity rate amoing other item). The combination of CM and MM wll result in an ...

  3. Approximation techniques for engineers

    CERN Document Server

    Komzsik, Louis

    2006-01-01

    Presenting numerous examples, algorithms, and industrial applications, Approximation Techniques for Engineers is your complete guide to the major techniques used in modern engineering practice. Whether you need approximations for discrete data of continuous functions, or you''re looking for approximate solutions to engineering problems, everything you need is nestled between the covers of this book. Now you can benefit from Louis Komzsik''s years of industrial experience to gain a working knowledge of a vast array of approximation techniques through this complete and self-contained resource.

  4. Optimization Technique With Sensitivity Analysis On Menu Scheduling For Boarding School Student Aged 13-18 Using “Sufahani-Ismail Algorithm”

    Science.gov (United States)

    Sudin, Azila M.; Sufahani, Suliadi

    2018-04-01

    Boarding school student aged 13-18 need to eat nutritious meals which contains proper calories, vitality and nutrients for appropriate development with a specific end goal to repair and upkeep the body tissues. Furthermore, it averts undesired diseases and contamination. Serving healthier food is a noteworthy stride towards accomplishing that goal. However, arranging a nutritious and balance menu manually is convoluted, wasteful and tedious. Therefore, the aim of this study is to develop a mathematical model with an optimization technique for menu scheduling that fulfill the whole supplement prerequisite for boarding school student, reduce processing time, minimize the budget and furthermore serve assortment type of food each day. It additionally gives the flexibility for the cook to choose any food to be considered in the beginning of the process and change any favored menu even after the ideal arrangement and optimal solution has been obtained. This is called sensitivity analysis. A recalculation procedure will be performed in light of the ideal arrangement and seven days menu was produced. The data was gathered from the Malaysian Ministry of Education and schools authorities. Menu arranging is a known optimization problem. Therefore Binary Programming alongside optimization technique and “Sufahani-Ismail Algorithm” were utilized to take care of this issue. In future, this model can be implemented to other menu problem, for example, for sports, endless disease patients, militaries, colleges, healing facilities and nursing homes.

  5. Applied Mathematical Optimization Technique on Menu Scheduling for Boarding School Student Using Delete-Reshuffle-Reoptimize Algorithm

    Science.gov (United States)

    Sufahani, Suliadi; Mohamad, Mahathir; Roslan, Rozaini; Ghazali Kamardan, M.; Che-Him, Norziha; Ali, Maselan; Khalid, Kamal; Nazri, E. M.; Ahmad, Asmala

    2018-04-01

    Boarding school student needs to eat well balanced nutritious food which includes proper calories, vitality and supplements for legitimate development, keeping in mind the end goal is to repair and support the body tissues and averting undesired ailments and disease. Serving healthier menu is a noteworthy stride towards accomplishing that goal. Be that as it may, arranging a nutritious and adjusted menu physically is confounded, wasteful and tedious. This study intends to build up a scientific mathematical model for eating routine arranging that improves and meets the vital supplement consumption for boarding school student aged 13-18 and in addition saving the financial plan. It likewise gives the adaptability for the cook to change any favoured menu even after the ideal arrangement has been produced. A recalculation procedure will be performed in view of the ideal arrangement. The information was gathered from the the Ministry of Education and boarding schools’ authorities. Menu arranging is a notable enhancement issue and part of well-established optimization problem. The model was fathomed by utilizing Binary Programming and “Delete-Reshuffle-Reoptimize Algortihm (DDRA)”.

  6. Construction of web-based nutrition education contents and searching engine for usage of healthy menu of children

    Science.gov (United States)

    Lee, Tae-Kyong; Chung, Hea-Jung; Park, Hye-Kyung; Lee, Eun-Ju; Nam, Hye-Seon; Jung, Soon-Im; Cho, Jee-Ye; Lee, Jin-Hee; Kim, Gon; Kim, Min-Chan

    2008-01-01

    A diet habit, which is developed in childhood, lasts for a life time. In this sense, nutrition education and early exposure to healthy menus in childhood is important. Children these days have easy access to the internet. Thus, a web-based nutrition education program for children is an effective tool for nutrition education of children. This site provides the material of the nutrition education for children with characters which are personified nutrients. The 151 menus are stored in the site together with video script of the cooking process. The menus are classified by the criteria based on age, menu type and the ethnic origin of the menu. The site provides a search function. There are three kinds of search conditions which are key words, menu type and "between" expression of nutrients such as calorie and other nutrients. The site is developed with the operating system Windows 2003 Server, the web server ZEUS 5, development language JSP, and database management system Oracle 10 g. PMID:20126375

  7. Trigger Menu in 2017

    CERN Document Server

    The ATLAS collaboration

    2018-01-01

    This document summarises the trigger menu deployed by the ATLAS experiment during 2017 data taking at proton-proton collision centre-of-mass energies of $\\sqrt{s}=13$ TeV and $\\sqrt{s}=5$ TeV at the LHC and describes the improvements with respect to the trigger system and menu used in 2016 data taking.

  8. Genome scale engineering techniques for metabolic engineering.

    Science.gov (United States)

    Liu, Rongming; Bassalo, Marcelo C; Zeitoun, Ramsey I; Gill, Ryan T

    2015-11-01

    Metabolic engineering has expanded from a focus on designs requiring a small number of genetic modifications to increasingly complex designs driven by advances in genome-scale engineering technologies. Metabolic engineering has been generally defined by the use of iterative cycles of rational genome modifications, strain analysis and characterization, and a synthesis step that fuels additional hypothesis generation. This cycle mirrors the Design-Build-Test-Learn cycle followed throughout various engineering fields that has recently become a defining aspect of synthetic biology. This review will attempt to summarize recent genome-scale design, build, test, and learn technologies and relate their use to a range of metabolic engineering applications. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  9. Marketing a Menu.

    Science.gov (United States)

    1987-10-31

    Patients contemplating the relative nutritional values of mixed macedoine of vegetables and pea puree will soon be finding their hospital menu cards enlivened by supermarkets, travel services and other adverts.

  10. TECHNIQUES USED IN SEARCH ENGINE MARKETING

    OpenAIRE

    Assoc. Prof. Liviu Ion Ciora Ph. D; Lect. Ion Buligiu Ph. D

    2010-01-01

    Search engine marketing (SEM) is a generic term covering a variety of marketing techniques intended for attracting web traffic in search engines and directories. SEM is a popular tool since it has the potential of substantial gains with minimum investment. On the one side, most search engines and directories offer free or extremely cheap listing. On the other side, the traffic coming from search engines and directories tends to be motivated for acquisitions, making these visitors some of the ...

  11. ELECTRICAL TECHNIQUES FOR ENGINEERING APPLICATIONS.

    Science.gov (United States)

    Bisdorf, Robert J.

    1985-01-01

    Surface electrical geophysical methods have been used in such engineering applications as locating and delineating shallow gravel deposits, depth to bedrock, faults, clay zones, and other geological phenomena. Other engineering applications include determining water quality, tracing ground water contaminant plumes and locating dam seepages. Various methods and electrode arrays are employed to solve particular geological problems. The sensitivity of a particular method or electrode array depends upon the physics on which the method is based, the array geometry, the electrical contrast between the target and host materials, and the depth to the target. Each of the available electrical methods has its own particular advantages and applications which the paper discusses.

  12. Accounting in the Social Menu

    Science.gov (United States)

    González, José Villacís

    2010-01-01

    This paper was born out of combinatorics. It defines a level of utility which, though it cannot be measured, can be preferred to another in each specific combination of goods. In turn, each combination defines a menu, meaning that there will be as many menus as there are combinations of goods. In this manner, we have a menu and a utility for each…

  13. Healthy meals on the menu

    DEFF Research Database (Denmark)

    Thunström, Linda; Nordström, Leif Jonas; Shogren, Jason

    2016-01-01

    Menu labelling of meals prepared away from home is a policy designed to help consumers make healthier food choices. In this paper we use a field experiment in Sweden to examine if a restaurant benefits from introducing a meal labelled as healthy on its menu by experiencing an overall increase...... in sales. We cannot reject the hypothesis that sales are the same before and after the introduction of a meal labelled as healthy on the menu, i.e. our data does not support the idea that restaurants increase their sales from supplying a meal labelled as healthy....

  14. Amuse Restaurant Lunch Menu 2017

    OpenAIRE

    Amuse Restaurant

    2017-01-01

    Since opening, Amuse Restaurant has garnered rave reviews from the Country’s most trusted and renowned food critics. Praise has flowed for Conor’s individual style of cooking, which brings Asian flavours, namely Japanese, to modern French cuisine. The menu focuses mainly on tasting menus as it is the best way to experience this kind of food, however there is a three course set menu available Tuesday to Thursday for mid week dining. The lunch menu is a three course affair with the option of a ...

  15. Amuse Restaurant Spring Menu 2017

    OpenAIRE

    Amuse Restaurant

    2017-01-01

    Since opening, Amuse Restaurant has garnered rave reviews from the Country’s most trusted and renowned food critics. Praise has flowed for Conor’s individual style of cooking, which brings Asian flavours, namely Japanese, to modern French cuisine. The menu focuses mainly on tasting menus as it is the best way to experience this kind of food, however there is a three course set menu available Tuesday to Thursday for mid week dining. The lunch menu is a three course affair with the option of a ...

  16. Soft computing techniques in engineering applications

    CERN Document Server

    Zhong, Baojiang

    2014-01-01

    The Soft Computing techniques, which are based on the information processing of biological systems are now massively used in the area of pattern recognition, making prediction & planning, as well as acting on the environment. Ideally speaking, soft computing is not a subject of homogeneous concepts and techniques; rather, it is an amalgamation of distinct methods that confirms to its guiding principle. At present, the main aim of soft computing is to exploit the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solutions cost. The principal constituents of soft computing techniques are probabilistic reasoning, fuzzy logic, neuro-computing, genetic algorithms, belief networks, chaotic systems, as well as learning theory. This book covers contributions from various authors to demonstrate the use of soft computing techniques in various applications of engineering.  

  17. The Reinforcing Event (RE) Menu

    Science.gov (United States)

    Addison, Roger M.; Homme, Lloyd E.

    1973-01-01

    A motivational system, the Contingency Management System, uses contracts in which some amount of defined task behavior is demanded for some interval of reinforcing event. The Reinforcing Event Menu, a list of high probability reinforcing behaviors, is used in the system as a prompting device for the learner and as an aid for the administrator in…

  18. Intelligent techniques in engineering management theory and applications

    CERN Document Server

    Onar, Sezi

    2015-01-01

    This book presents recently developed intelligent techniques with applications and theory in the area of engineering management. The involved applications of intelligent techniques such as neural networks, fuzzy sets, Tabu search, genetic algorithms, etc. will be useful for engineering managers, postgraduate students, researchers, and lecturers. The book has been written considering the contents of a classical engineering management book but intelligent techniques are used for handling the engineering management problem areas. This comprehensive characteristics of the book makes it an excellent reference for the solution of complex problems of engineering management. The authors of the chapters are well-known researchers with their previous works in the area of engineering management.

  19. Engine control techniques to account for fuel effects

    Science.gov (United States)

    Kumar, Shankar; Frazier, Timothy R.; Stanton, Donald W.; Xu, Yi; Bunting, Bruce G.; Wolf, Leslie R.

    2014-08-26

    A technique for engine control to account for fuel effects including providing an internal combustion engine and a controller to regulate operation thereof, the engine being operable to combust a fuel to produce an exhaust gas; establishing a plurality of fuel property inputs; establishing a plurality of engine performance inputs; generating engine control information as a function of the fuel property inputs and the engine performance inputs; and accessing the engine control information with the controller to regulate at least one engine operating parameter.

  20. Techniques for Analysing Problems in Engineering Projects

    DEFF Research Database (Denmark)

    Thorsteinsson, Uffe

    1998-01-01

    Description of how CPM network can be used for analysing complex problems in engineering projects.......Description of how CPM network can be used for analysing complex problems in engineering projects....

  1. Delahunt Drinks Menu 2017

    OpenAIRE

    Delahunt

    2017-01-01

    “After liquids came solids,” and our aim is to provide the best seasonal, local produce in a relaxed and welcoming setting. In keeping with the buildings Victorian origins, our menus are influenced by traditional and often overlooked cookery techniques. Home curing and smoking, slow cooked braises, savoury puddings and pies, pickles, preserves, traditional desserts and bread-making are some of our specialties.
 Championing small local producers is an essential part of our ethos. Our Head C...

  2. Delahunt Snacks Menu 2017

    OpenAIRE

    Delahunt

    2017-01-01

    After liquids came solids,” and our aim is to provide the best seasonal, local produce in a relaxed and welcoming setting. In keeping with the buildings Victorian origins, our menus are influenced by traditional and often overlooked cookery techniques. Home curing and smoking, slow cooked braises, savoury puddings and pies, pickles, preserves, traditional desserts and bread-making are some of our specialties.
 Championing small local producers is an essential part of our ethos. Our Head Ch...

  3. Delahunt Dinner Menu 2017

    OpenAIRE

    Delahunt

    2017-01-01

    “After liquids came solids,” and our aim is to provide the best seasonal, local produce in a relaxed and welcoming setting. In keeping with the buildings Victorian origins, our menus are influenced by traditional and often overlooked cookery techniques. Home curing and smoking, slow cooked braises, savoury puddings and pies, pickles, preserves, traditional desserts and bread-making are some of our specialties.
 Championing small local producers is an essential part of our ethos. Our Head C...

  4. Delahunt Group Menu 2017

    OpenAIRE

    Delahunt

    2017-01-01

    After liquids came solids,” and our aim is to provide the best seasonal, local produce in a relaxed and welcoming setting. In keeping with the buildings Victorian origins, our menus are influenced by traditional and often overlooked cookery techniques. Home curing and smoking, slow cooked braises, savoury puddings and pies, pickles, preserves, traditional desserts and bread-making are some of our specialties.
 Championing small local producers is an essential part of our ethos. Our Head Ch...

  5. Delahunt Lunch Menu 2017

    OpenAIRE

    Delahunt

    2017-01-01

    “After liquids came solids,” and our aim is to provide the best seasonal, local produce in a relaxed and welcoming setting. In keeping with the buildings Victorian origins, our menus are influenced by traditional and often overlooked cookery techniques. Home curing and smoking, slow cooked braises, savoury puddings and pies, pickles, preserves, traditional desserts and bread-making are some of our specialties.
 Championing small local producers is an essential part of our ethos. Our Head C...

  6. [Advanced online search techniques and dedicated search engines for physicians].

    Science.gov (United States)

    Nahum, Yoav

    2008-02-01

    In recent years search engines have become an essential tool in the work of physicians. This article will review advanced search techniques from the world of information specialists, as well as some advanced search engine operators that may help physicians improve their online search capabilities, and maximize the yield of their searches. This article also reviews popular dedicated scientific and biomedical literature search engines.

  7. Bone tissue engineering scaffolding: computer-aided scaffolding techniques.

    Science.gov (United States)

    Thavornyutikarn, Boonlom; Chantarapanich, Nattapon; Sitthiseripratip, Kriskrai; Thouas, George A; Chen, Qizhi

    Tissue engineering is essentially a technique for imitating nature. Natural tissues consist of three components: cells, signalling systems (e.g. growth factors) and extracellular matrix (ECM). The ECM forms a scaffold for its cells. Hence, the engineered tissue construct is an artificial scaffold populated with living cells and signalling molecules. A huge effort has been invested in bone tissue engineering, in which a highly porous scaffold plays a critical role in guiding bone and vascular tissue growth and regeneration in three dimensions. In the last two decades, numerous scaffolding techniques have been developed to fabricate highly interconnective, porous scaffolds for bone tissue engineering applications. This review provides an update on the progress of foaming technology of biomaterials, with a special attention being focused on computer-aided manufacturing (Andrade et al. 2002) techniques. This article starts with a brief introduction of tissue engineering (Bone tissue engineering and scaffolds) and scaffolding materials (Biomaterials used in bone tissue engineering). After a brief reviews on conventional scaffolding techniques (Conventional scaffolding techniques), a number of CAM techniques are reviewed in great detail. For each technique, the structure and mechanical integrity of fabricated scaffolds are discussed in detail. Finally, the advantaged and disadvantage of these techniques are compared (Comparison of scaffolding techniques) and summarised (Summary).

  8. On Industrial Use of Requirements Engineering Techniques

    DEFF Research Database (Denmark)

    Bækgaard, Lars; Bæk Jørgensen, Jens; Bisgaard Lassen, Kristian

    2007-01-01

    The basis for this paper is a workshop, which was organised by the first and second author, together with colleagues, and held in February 2007. The theme of the workshop was "requirements engineering for innovative administrative systems". The workshop participants came from software companies...... project is about application of the requirements engineering approach called Executable Use Cases in the development of a certain IT system for the Public Utilities in Aalborg, Denmark. The second project is about application of the analysis approach called Activity Cases for a public library in Vejle...

  9. A Menu Technique for Utilizing VERT Interactively

    Science.gov (United States)

    1982-07-01

    FIELD ft, 12) IFhtF = 1FFCF ♦ 1 RLTLPN TKArSFtH Ctlfi EiTFER R1GFT OR LEFT FANC JLSI IF ICATILN CL lr.33 I...D-49 FILE: VEKTTELE CATA Al MIDWEST S+E COMPUTER CENTER GENE HATE ^RAKE. Y AXIS X GRID Y GRID Y AXI S A PLCT. HI H 1.0

  10. Partial differential equations mathematical techniques for engineers

    CERN Document Server

    Epstein, Marcelo

    2017-01-01

    This monograph presents a graduate-level treatment of partial differential equations (PDEs) for engineers. The book begins with a review of the geometrical interpretation of systems of ODEs, the appearance of PDEs in engineering is motivated by the general form of balance laws in continuum physics. Four chapters are devoted to a detailed treatment of the single first-order PDE, including shock waves and genuinely non-linear models, with applications to traffic design and gas dynamics. The rest of the book deals with second-order equations. In the treatment of hyperbolic equations, geometric arguments are used whenever possible and the analogy with discrete vibrating systems is emphasized. The diffusion and potential equations afford the opportunity of dealing with questions of uniqueness and continuous dependence on the data, the Fourier integral, generalized functions (distributions), Duhamel's principle, Green's functions and Dirichlet and Neumann problems. The target audience primarily comprises graduate s...

  11. Photographic and drafting techniques simplify method of producing engineering drawings

    Science.gov (United States)

    Provisor, H.

    1968-01-01

    Combination of photographic and drafting techniques has been developed to simplify the preparation of three dimensional and dimetric engineering drawings. Conventional photographs can be converted to line drawings by making copy negatives on high contrast film.

  12. Protein engineering techniques gateways to synthetic protein universe

    CERN Document Server

    Poluri, Krishna Mohan

    2017-01-01

    This brief provides a broad overview of protein-engineering research, offering a glimpse of the most common experimental methods. It also presents various computational programs with applications that are widely used in directed evolution, computational and de novo protein design. Further, it sheds light on the advantages and pitfalls of existing methodologies and future perspectives of protein engineering techniques.

  13. Methods and experimental techniques in computer engineering

    CERN Document Server

    Schiaffonati, Viola

    2014-01-01

    Computing and science reveal a synergic relationship. On the one hand, it is widely evident that computing plays an important role in the scientific endeavor. On the other hand, the role of scientific method in computing is getting increasingly important, especially in providing ways to experimentally evaluate the properties of complex computing systems. This book critically presents these issues from a unitary conceptual and methodological perspective by addressing specific case studies at the intersection between computing and science. The book originates from, and collects the experience of, a course for PhD students in Information Engineering held at the Politecnico di Milano. Following the structure of the course, the book features contributions from some researchers who are working at the intersection between computing and science.

  14. Sputtering. [as deposition technique in mechanical engineering

    Science.gov (United States)

    Spalvins, T.

    1976-01-01

    This paper primarily reviews the potential of using the sputtering process as a deposition technique; however, the manufacturing and sputter etching aspects are also discussed. Since sputtering is not regulated by classical thermodynamics, new multicomponent materials can be developed in any possible chemical composition. The basic mechanism for dc and rf sputtering is described. Sputter-deposition is described in terms of the unique advantageous features it offers such as versatility, momentum transfer, stoichiometry, sputter-etching, target geometry (coating complex surfaces), precise controls, flexibility, ecology, and sputtering rates. Sputtered film characteristics, such as strong adherence and coherence and film morphology, are briefly evaluated in terms of varying the sputtering parameters. Also described are some of the specific industrial areas which are turning to sputter-deposition techniques.

  15. Amuse Restaurant Set Dinner Menu 2017

    OpenAIRE

    Amuse Restaurant

    2017-01-01

    Since opening, Amuse Restaurant has garnered rave reviews from the Country’s most trusted and renowned food critics. Praise has flowed for Conor’s individual style of cooking, which brings Asian flavours, namely Japanese, to modern French cuisine. The menu focuses mainly on tasting menus as it is the best way to experience this kind of food, however there is a three course set menu available Tuesday to Thursday for mid week dining. The lunch menu is a three course affair with the option of a ...

  16. Reliability analysis techniques for the design engineer

    International Nuclear Information System (INIS)

    Corran, E.R.; Witt, H.H.

    1982-01-01

    This paper describes a fault tree analysis package that eliminates most of the housekeeping tasks involved in proceeding from the initial construction of a fault tree to the final stage of presenting a reliability analysis in a safety report. It is suitable for designers with relatively little training in reliability analysis and computer operation. Users can rapidly investigate the reliability implications of various options at the design stage and evolve a system which meets specified reliability objectives. Later independent review is thus unlikely to reveal major shortcomings necessitating modification and project delays. The package operates interactively, allowing the user to concentrate on the creative task of developing the system fault tree, which may be modified and displayed graphically. For preliminary analysis, system data can be derived automatically from a generic data bank. As the analysis proceeds, improved estimates of critical failure rates and test and maintenance schedules can be inserted. The technique is applied to the reliability analysis of the recently upgraded HIFAR Containment Isolation System. (author)

  17. International Conference on Soft Computing Techniques and Engineering Application

    CERN Document Server

    Li, Xiaolong

    2014-01-01

    The main objective of ICSCTEA 2013 is to provide a platform for researchers, engineers and academicians from all over the world to present their research results and development activities in soft computing techniques and engineering application. This conference provides opportunities for them to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.

  18. Evaluation of the Use of Two Teaching Techniques in Engineering

    Directory of Open Access Journals (Sweden)

    Jose Antonio Alvarez Salas

    2014-06-01

    Full Text Available This paper presents an analysis of the practical implementation of two teaching techniques so-called Problem-Based Learning and Cooperative Learning. These techniques were applied to some courses in the Department of Mechanical and Electrical Engineering and evaluated through assessment rubrics. In a sample of students and teachers, the assessment rubrics were applied to numerically evaluate the proportion of each course, in which the teacher uses traditional teaching versus teaching for meaningful learning. The results of the presented analysis allow to verify the use of these teaching techniques by professors of the Department of Mechanical and Electrical Engineering. This activity was developed as a part of the work established by the Institutional Development Plan of the Faculty of Engineering, which includes the strategic objective of developing an innovative educational model in the following ten years.

  19. Experimental Technique of Titanium Fire in Aero-engine

    Directory of Open Access Journals (Sweden)

    MI Guangbao

    2016-06-01

    Full Text Available Titanium fire is the typical catastrophic fault in the aero-engine. Aiming at the urgent demand for experimental technique of titanium fire from advanced high thrust-weight ratio aero-engine, the combustion technology and theory of titanium alloy based on friction oxygen concentration method (FOC were systematically studied. The evaluation method of fireproof property and the friction ignition model were built, and the fireproof mechanism was illustrated. By generalizing recent progress in experimental technique of titanium fire from three levels, including evolutionary rule, mechanism and prevention and control technology, the ideas and directions of experimental technique associated with the application research of titanium fire in the future were proposed, namely overall evaluation of fireproof property close to air flow environment of the aero-engine, prediction model of fireproof property and experimental verification of fireproof technique under the air flow environment of aero-engine. It is necessary to establish the prevention system of titanium fire in aero-engine, which contributes to the realization of "full titanium" in compressor and to the increase of high thrust-weight ratio.

  20. Engineers find climbing techniques work well for dam inspections

    Energy Technology Data Exchange (ETDEWEB)

    O`Shea, M.; Graves, A. [Bureau of Reclamation, Denver, CO (United States)

    1996-10-01

    Climbing techniques adopted by the Bureau of Reclamation to inspect previously inaccessible or difficult to reach features at dams are described. Following the failure of the steel radial-arm gate at Folsom Dam, engineers mounted an effort to reach and inspect the dam`s seven other spillway gates. This close-up examination was performed to: (1) determine the condition of these gates; and (2) gather clues about the failure of the one gate. The access techniques described involved mountaineering techniques, as opposed to high scaling techniques, performed with dynamic and static nylon kermantle ropes.

  1. Neural engineering from advanced biomaterials to 3D fabrication techniques

    CERN Document Server

    Kaplan, David

    2016-01-01

    This book covers the principles of advanced 3D fabrication techniques, stem cells and biomaterials for neural engineering. Renowned contributors cover topics such as neural tissue regeneration, peripheral and central nervous system repair, brain-machine interfaces and in vitro nervous system modeling. Within these areas, focus remains on exciting and emerging technologies such as highly developed neuroprostheses and the communication channels between the brain and prostheses, enabling technologies that are beneficial for development of therapeutic interventions, advanced fabrication techniques such as 3D bioprinting, photolithography, microfluidics, and subtractive fabrication, and the engineering of implantable neural grafts. There is a strong focus on stem cells and 3D bioprinting technologies throughout the book, including working with embryonic, fetal, neonatal, and adult stem cells and a variety of sophisticated 3D bioprinting methods for neural engineering applications. There is also a strong focus on b...

  2. A review of rapid prototyping techniques for tissue engineering purposes

    NARCIS (Netherlands)

    Peltola, Sanna M.; Melchels, Ferry P. W.; Grijpma, Dirk W.; Kellomaki, Minna

    2008-01-01

    Rapid prototyping (RP) is a common name for several techniques, which read in data from computer-aided design (CAD) drawings and manufacture automatically three-dimensional objects layer-by-layer according to the virtual design. The utilization of RP in tissue engineering enables the production of

  3. Convergent engineering techniques for management of nuclear processes

    International Nuclear Information System (INIS)

    Carabulea, A.; Popa, I.

    1995-01-01

    The paper briefly presents the concept of convergent arhemo-systematical engineering, its advantages in comparison with classical methods of research, design, manufacture. The convergent engineering application supposes the usage of the advanced methods, techniques and equipment corresponding to the domain and specific for the corresponding branch of computer science. Starting from the convergent engineering principles and concept, the paper proposes two models applicable for new products and also for improving and optimizing the existing ones. The models are based on two levels of feedback corresponding to two levels of control and they assume the utilization of expert and robot-expert systems. The economical efficiency of the application of the convergent engineering method is evaluated for the case of a nuclear power plant by calculation the main technical and economical indicators. (Author) 2 Figs., 5 Refs

  4. Metabolic Engineering: Techniques for analysis of targets for genetic manipulations

    DEFF Research Database (Denmark)

    Nielsen, Jens Bredal

    1998-01-01

    Metabolic engineering has been defined as the purposeful modification of intermediary metabolism using recombinant DNA techniques. With this definition metabolic engineering includes: (1) inserting new pathways in microorganisms with the aim of producing novel metabolites, e.g., production...... of polyketides by Streptomyces; (2) production of heterologous peptides, e.g., production of human insulin, erythropoitin, and tPA; and (3) improvement of both new and existing processes, e.g., production of antibiotics and industrial enzymes. Metabolic engineering is a multidisciplinary approach, which involves...... input from chemical engineers, molecular biologists, biochemists, physiologists, and analytical chemists. Obviously, molecular biology is central in the production of novel products, as well as in the improvement of existing processes. However, in the latter case, input from other disciplines is pivotal...

  5. Additive manufacturing techniques for the production of tissue engineering constructs.

    Science.gov (United States)

    Mota, Carlos; Puppi, Dario; Chiellini, Federica; Chiellini, Emo

    2015-03-01

    'Additive manufacturing' (AM) refers to a class of manufacturing processes based on the building of a solid object from three-dimensional (3D) model data by joining materials, usually layer upon layer. Among the vast array of techniques developed for the production of tissue-engineering (TE) scaffolds, AM techniques are gaining great interest for their suitability in achieving complex shapes and microstructures with a high degree of automation, good accuracy and reproducibility. In addition, the possibility of rapidly producing tissue-engineered constructs meeting patient's specific requirements, in terms of tissue defect size and geometry as well as autologous biological features, makes them a powerful way of enhancing clinical routine procedures. This paper gives an extensive overview of different AM techniques classes (i.e. stereolithography, selective laser sintering, 3D printing, melt-extrusion-based techniques, solution/slurry extrusion-based techniques, and tissue and organ printing) employed for the development of tissue-engineered constructs made of different materials (i.e. polymeric, ceramic and composite, alone or in combination with bioactive agents), by highlighting their principles and technological solutions. Copyright © 2012 John Wiley & Sons, Ltd.

  6. Applying decision-making techniques to Civil Engineering Projects

    Directory of Open Access Journals (Sweden)

    Fam F. Abdel-malak

    2017-12-01

    Full Text Available Multi-Criteria Decision-Making (MCDM techniques are found to be useful tools in project managers’ hands to overcome decision-making (DM problems in Civil Engineering Projects (CEPs. The main contribution of this paper includes selecting and studying the popular MCDM techniques that uses different and wide ranges of data types in CEPs. A detailed study including advantages and pitfalls of using the Analytic Hierarchy Process (AHP and Fuzzy Technique for Order of Preference by Similarity to Ideal Solution (Fuzzy TOPSIS is introduced. Those two techniques are selected for the purpose of forming a package that covers most available data types in CEPs. The results indicated that AHP has a structure which simplifies complicated problems, while Fuzzy TOPSIS uses the advantages of linguistic variables to solve the issue of undocumented data and ill-defined problems. Furthermore, AHP is a simple technique that depends on pairwise comparisons of factors and natural attributes, beside it is preferable for widely spread hierarchies. On the other hand, Fuzzy TOPSIS needs more information but works well for the one-tier decision tree as well as it shows more flexibility to work in fuzzy environments. The two techniques have the facility to be integrated and combined in a new module to support most of the decisions required in CEPs. Keywords: Decision-making, AHP, Fuzzy TOPSIS, CBA, Civil Engineering Projects

  7. Menu Proposal to Use Powdered Agar

    OpenAIRE

    土屋, ひろ子; 嶋村, 桃子; 小松, 沙霧

    2015-01-01

    The author was involved in the development of the menu items that might be sold at “Taisho Village”, a theme park. Requirements in the menu development were that cooking should be simple as it starts cooking after receiving orders and it should have attractive appearances. Powdered agar has advantages over rod-shaped or string-shaped agar, with easiness of handling such as its ready solubility in water and no need to wash, rehydrate or strain. Because powdered agar is easy to use in cooking,...

  8. Frequent price changes under menu costs

    DEFF Research Database (Denmark)

    Hansen, Per Svejstrup

    1999-01-01

    , the price may be changed more frequent in the short run, and in the long run it definitely will. Hence, observing frequent price changes is not necessarily inconsistent with a firm operating under menu costs. This paper relies on an article by Dixit (1991), (Review of Economic studies, 58, 141......This paper investigates the effect of uncertainty on a single firm's pricing behaviour in a dynamic menu cost model that results in (S,s)-rules where the price is fixed inside a band. It will be demonstrated that even though the band of inaction widens in response to increased uncertainty...

  9. Discontinuation of the Bulletin's menu page

    CERN Document Server

    Publications Section

    2005-01-01

    The menus of the various CERN restaurants will no longer be published in the Bulletin as of Monday 4 April (issue No. 14/2005). The menu pages are being discontinued both as a savings measure and due to the low level of interest in this section of the Bulletin. The most recent survey of Bulletin readers showed that only 13% of the people questioned regularly read the menu section, compared to between 40% and 85% in the case of the other sections. Publications Section SG/CO Tel. 79971

  10. Discontinuation of the Bulletin's menu page

    CERN Multimedia

    Publications Section

    2005-01-01

    The menus of the various CERN restaurants will no longer be published in the Bulletin as of Monday 4 April (issue No. 14/2005). The menu pages are being discontinued both as a savings measure and due to the low level of interest in this section of the Bulletin. The most recent survey of Bulletin readers showed that only 13% of the people questioned regularly read the menu section, compared to between 40% and 85% in the case of the other sections. Publications Section DSU-CO Tel. 79971

  11. Decomposition techniques in mathematical programming engineering and science applications

    CERN Document Server

    Conejo, Antonio J; Minguez, Roberto; Garcia-Bertrand, Raquel

    2006-01-01

    Optimization plainly dominates the design, planning, operation, and c- trol of engineering systems. This is a book on optimization that considers particular cases of optimization problems, those with a decomposable str- ture that can be advantageously exploited. Those decomposable optimization problems are ubiquitous in engineering and science applications. The book considers problems with both complicating constraints and complicating va- ables, and analyzes linear and nonlinear problems, with and without in- ger variables. The decomposition techniques analyzed include Dantzig-Wolfe, Benders, Lagrangian relaxation, Augmented Lagrangian decomposition, and others. Heuristic techniques are also considered. Additionally, a comprehensive sensitivity analysis for characterizing the solution of optimization problems is carried out. This material is particularly novel and of high practical interest. This book is built based on many clarifying, illustrative, and compu- tional examples, which facilitate the learning p...

  12. Calorie changes in chain restaurant menu items: implications for obesity and evaluations of menu labeling.

    Science.gov (United States)

    Bleich, Sara N; Wolfson, Julia A; Jarlenski, Marian P

    2015-01-01

    Supply-side reductions to the calories in chain restaurants are a possible benefit of upcoming menu labeling requirements. To describe trends in calories available in large U.S. restaurants. Data were obtained from the MenuStat project, a census of menu items in 66 of the 100 largest U.S. restaurant chains, for 2012 and 2013 (N=19,417 items). Generalized linear models were used to calculate (1) the mean change in calories from 2012 to 2013, among items on the menu in both years; and (2) the difference in mean calories, comparing newly introduced items to those on the menu in 2012 only (overall and between core versus non-core items). Data were analyzed in 2014. Mean calories among items on menus in both 2012 and 2013 did not change. Large restaurant chains in the U.S. have recently had overall declines in calories in newly introduced menu items (-56 calories, 12% decline). These declines were concentrated mainly in new main course items (-67 calories, 10% decline). New beverage (-26 calories, 8% decline) and children's (-46 calories, 20% decline) items also had fewer mean calories. Among chain restaurants with a specific focus (e.g., burgers), average calories in new menu items not core to the business declined more than calories in core menu items. Large chain restaurants significantly reduced the number of calories in newly introduced menu items. Supply-side changes to the calories in chain restaurants may have a significant impact on obesity prevention. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  13. Monitoring of civil engineering structures using Digital Image Correlation technique

    Science.gov (United States)

    Malesa, M.; Szczepanek, D.; Kujawińska, M.; Świercz, A.; Kołakowski, P.

    2010-06-01

    The Digital Image Correlation (DIC) technique enables full field, noncontact measurements of displacements and strains of a wide variety of objects. An adaptation of the DIC technique for monitoring of civil-engineering structures is presented in the paper. A general concept of the complex, automatic monitoring system, in which the DIC sensor plays an important role is described. Some new software features, which aim to facilitate outdoor measurements and speed up the correlation analysis, is also introduced. As an example of application, measurements of a railway bridge in Nieporet (Poland) are presented. The experimental results are compared with displacements of a FEM model of the bridge.

  14. Software engineering techniques and CASE tools in RD13

    Science.gov (United States)

    Buono, S.; Gaponenko, I.; Jones, R.; Khodabandeh, A.; Mapelli, L.; Mornacchi, G.; Prigent, D.; Sanchez-Corral, E.; Skiadelli, M.; Toppers, A.; Duval, P. Y.; Ferrato, D.; Le Van Suu, A.; Qian, Z.; Rondot, C.; Ambrosini, G.; Fumagalli, G.; Polesello, G.; Aguer, M.; Huet, M.

    1994-12-01

    The RD13 project was approved in April 1991 for the development of a scalable data-taking system suitable for hosting various LHC studies. One of its goals is the exploitation of software engineering techniques, in order to indicate their overall suitability for data acquisition (DAQ), software design and implementation. This paper describes how such techniques have been applied to the development of components of the RD13 DAQ used in test-beam runs at CERN. We describe our experience with the Artifex CASE tool and its associated methodology. The issues raised when code generated by a CASE tool has to be integrated into an existing environment are also discussed.

  15. Attempt of application of prefabrication techniques to nuclear engineering

    International Nuclear Information System (INIS)

    Frangi, Roger

    1981-01-01

    Prefabrication can apply to nuclear civil engineering for the execution of complicated or tall shuttering or casing work, requiring shoring that one would wish to simplify or suppress. This technique saves on work hours and improves quality and safety. A few examples carried out on the Saint-Laurent-des-Eaux and Chinon power stations are given as well as that which will be undertaken on the Belleville power station [fr

  16. The Menu for Every Young Mathematician's Appetite

    Science.gov (United States)

    Legnard, Danielle S.; Austin, Susan L.

    2012-01-01

    Math Workshop offers differentiated instruction to foster a deep understanding of rich, rigorous mathematics that is attainable by all learners. The inquiry-based model provides a menu of multilevel math tasks, within the daily math block, that focus on similar mathematical content. Math Workshop promotes a culture of engagement and…

  17. Menu hind on valu? / Jaak Allik

    Index Scriptorium Estoniae

    Allik, Jaak, 1946-

    2004-01-01

    Mõtisklusi "Mosfilmis" 1984 valminud mängufilmi "Menu" ainetel, mis kujutab teatri köögipoolt. Sellega seoses arutleb autor lavastaja- ja näitejatöö üle, kunstinõukogude koosolekute osast lavastuse vastuvõtul, teatritöö eetikast

  18. IERIAS: inference engine for reactor accident diagnostic system using knowledge engineering technique

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Yoshida, Kazuo; Kohsaka, Atsuo; Yamamoto, Minoru.

    1984-11-01

    This report describes an inference engine IERIAS which has been devoloped for a diagnostic system to identify the cause and type of an abnormal transient of a reactor plant. This system using knowledge engineering technique consists of a knowledge base and an inference engine. The inference engine IERIAS is designed so as to treat time-varying data of a plant. The major features of IERIAS are ; (1) histroy of transients can be treated, (2) knowledge base can be divided into some knowledge units, (3) program language UTILISP is used which is suitable for symbolic data manipulation. Inference was made using IERIAS with a knowledge base which was created from simulated results of various transients by a PWR plant simulator. The results showed a good applicability of IERIAS for reactor diagnosis. (author)

  19. Eliciting the Dutch loan phoneme /g/ with the Menu Task

    NARCIS (Netherlands)

    Hamann, S.; de Jonge, A.

    2015-01-01

    This article introduces the menu task, which can be used to elicit infrequent sounds such as loan phonemes that only occur in a restricted set of words. The menu task is similar to the well-known map task and involves the interaction of two participants to create a menu on the basis of a list of

  20. Menu Planning Guide for School Food Service. Revised.

    Science.gov (United States)

    VanEgmont-Pannell, Dorothy; And Others

    This menu planning guide for school lunches and breakfasts contains: (1) lunch requirements, recommendations, and policies; (2) the basics of menu planning; (3) how to vary portions for various age/grade groups; (4) planning breakfasts; (5) merchandising school lunches and breakfasts; and (6) nutrition education and menu planning; Appendixes…

  1. Method for plant operation guidance by knowledge engineering technique

    International Nuclear Information System (INIS)

    Kiguchi, Takashi; Yoshida, Kenichi; Motoda, Hiroshi; Kobayashi, Setsuo

    1983-01-01

    A method for plant operation guidance has been developed by using the Knowledge Engineering technique. The method is characterized by its capability of handling plant dynamics. The knowledge-base includes plant simulation programs as tools to evaluate dynamic behaviors as well as production rules of ''if..., then...'' type. The inference engine is thus capable of predicting plant dynamics and making decisions in accordance with time progress. The performance of the guidance method was evaluated by simulation tests assuming various abnormal situations of a BWR power plant. It was shown that the method can detect each of the abnormal events along the course of their occurrence, and provide the guidance for corrective actions. The operation guidance method proposed in this paper is general and is applicable not only to nuclear power plants but also to other plants such as chemical production plants and fossile power plants. (author)

  2. Using Innovative Techniques for Manufacturing Rocket Engine Hardware

    Science.gov (United States)

    Betts, Erin M.; Reynolds, David C.; Eddleman, David E.; Hardin, Andy

    2011-01-01

    Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As we enter into a new space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt new and innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using the Workhorse Gas Generator (WHGG) test setup at MSFC?s East Test Area test stand 116, the duct was subject to extreme J-2X gas generator environments and endured a total of 538 seconds of hot-fire time. The duct survived the testing and was inspected after the test. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

  3. Menu labeling: the unintended consequences to the consumer.

    Science.gov (United States)

    Black, Ellen A

    2014-01-01

    The Affordable Care Act requires certain restaurants to provide nutritional information on their menus and menu boards, which is referred to as menu labeling. Menu labeling presupposes that providing consumers with the nutritional information about their food will cause them to reconsider their food choices by picking healthier food options over less healthy options, thereby reducing the nation's high obesity rate. However, several studies have shown that consumers do not make healthier food choices even when armed with menu labeling. The issue then becomes whether menu labeling provides a correlative benefit to consumers or whether there are unintended consequences that ultimately harm consumers.

  4. Repair and tissue engineering techniques for articular cartilage.

    Science.gov (United States)

    Makris, Eleftherios A; Gomoll, Andreas H; Malizos, Konstantinos N; Hu, Jerry C; Athanasiou, Kyriacos A

    2015-01-01

    Chondral and osteochondral lesions due to injury or other pathology commonly result in the development of osteoarthritis, eventually leading to progressive total joint destruction. Although current progress suggests that biologic agents can delay the advancement of deterioration, such drugs are incapable of promoting tissue restoration. The limited ability of articular cartilage to regenerate renders joint arthroplasty an unavoidable surgical intervention. This Review describes current, widely used clinical repair techniques for resurfacing articular cartilage defects; short-term and long-term clinical outcomes of these techniques are discussed. Also reviewed is a developmental pipeline of acellular and cellular regenerative products and techniques that could revolutionize joint care over the next decade by promoting the development of functional articular cartilage. Acellular products typically consist of collagen or hyaluronic-acid-based materials, whereas cellular techniques use either primary cells or stem cells, with or without scaffolds. Central to these efforts is the prominent role that tissue engineering has in translating biological technology into clinical products; therefore, concomitant regulatory processes are also discussed.

  5. Application of classic engineering techniques (value engineering and observational method) at the Weldon Spring Quarry

    International Nuclear Information System (INIS)

    Ferguson, R.D.; Valett, G.L.

    1991-01-01

    In July of 1987 the Weldon Spring quarry was listed on the Environmental Protection Agency National Priority List as the highest priority Federal facility site. The Weldon Spring Site Remedial Action Project applied the principles and techniques of Value Engineering (VE) and the Observational Method to remedial planning efforts at the quarry. VE sessions resulted in modifications of the scenarios developed during the Remedial Investigation/Feasibility Study (RM) process in preparation for conceptual design activities for the removal of waste from the quarry. The Observational Method, a technique developed to manage uncertainties, was used to guide both environmental and engineering planning to ensure that the waste removal activities win be carried out in a safe and environmentally responsible manner

  6. Buridan's Ass and a Menu of Options.

    OpenAIRE

    Svetlana Boyarchenko

    2005-01-01

    The goal of the paper is to study how a menu of options affects decisions of a rational agent facing uncertainty over future payoff streams. Using the real options approach, we demonstrate that multiple options not only increase the barrier which the underlying stochastic variable has to reach in order investment became optimal, but cause the investor to be inactive even when the cost of investment is vanishing. As a technical contribution, the paper suggests a robust method of solution of a ...

  7. Improved Nanomechanical Test Techniques for Surface Engineered Materials

    Directory of Open Access Journals (Sweden)

    Stephen R. Goodes

    2010-06-01

    Full Text Available The development and implementation of a wide range of innovative nanomechanical test techniques to solve tribological problems in applications as diverse as biomedical and automotive are described in this review. For improved wear resistance and durability, the importance of understanding the system response rather than the coating-only properties is emphasized. There are many applications involving mechanical contact where the key to understanding the problem is to test at higher load and to combine reliable measurements taken across different length scales using both nano- and micro-indentation and related wear measurement techniques which more closely simulate contact conditions to fully understand the mechanical behaviour and hence deliver improved application performance. Results are presented with the NanoTest platform for applications for biomedical devices and surface engineering of lightweight alloys for the automotive industry. By combining results with different techniques it is possible to postulate predictive design rules – based on the elastic and plastic deformation energies involved in contact - to aid the reliable optimisation of mechanical properties in the various contact situations in the different applications.

  8. Further developments in performance prediction techniques of adiabatic diesel engines

    Energy Technology Data Exchange (ETDEWEB)

    Rasihhan, Y

    1990-01-01

    The engine cycle simulation program 'SPICE', developed at Bath University, has been used extensively for insulated diesel engine research. The present study introduces more comprehensive engine heat transfer models thus enabling us to study the insulated engine heat transfer and performance characteristics in more detail. The new version of 'SPICE' separates the gas to wall heat transfer into two parts, convective and radiative. For this purpose, a detailed radiative heat transfer model which considers both the flame (gas and soot) and wall to wall radiative heat transfer is written. The previous engine resistance model is refined and replaced by a more detailed resistance model which considers piston-liner conduction heat transfer and 2-D heat flow in the liner. The wall surface temperature swing is also included in the engine heat transfer calculations which is quite significant in low conductivity ceramic insulated engines. A 1-D finite difference model is written for the transient heat transfer region of the wall and linked to the engine resistance model. This new version of 'SPICE' is used to predict the insulated engine heat transfer and performance for the experimental Petter PH1W engine for various insulation levels and schemes. An answer to the controversy of increase in engine heat loss with insulation is looked for. The effect of wall deposits on engine heat transfer and its significance for the insulated engine is highlighted. (Author).

  9. Visualization techniques in diesel engine research. Diesel Engine kenkyu ni okeru kashika gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Komori, M.; Tsujimura, K. (New ACE., Tsukuba (Japan))

    1993-04-01

    In order to grasp the phenomena actually occurring in the combustion chamber for improving the combustion and for reducing the exhaust gas emission of the diesel engines, the visualization techniques are becoming to be essential and indispensable. The authors have observed the spray and combustion, when proceeding the combustion improvement by the high pressure injection, and then have performed the image processing and simulation calculation based on them. The high pressure injection devices used for the experiment are the intensifier type and accumulator type which can generate the injection pressure more than 200MPa, and both of them are the electronic controlled hydraulic drive type, and are driven separately from the engine. Since it was found that the analysis of high pressure injection by the hologram is limited in the conditions, as for the spray, the spray analysis was performed by the transmitted light attenuation method and laser sheet method. As for the combustion, the engine for observing the combustion was trially made, and then the combustion state was observed by the high speed photograph. Furthermore, the flame temperature analysis by the image processing using the combustion photograph and the analysis of flow and turbulence of the flame were carried out. 9 refs., 16 figs.

  10. On teaching software engineering based on formal techniques

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2001-01-01

    thoughts about and plans for a different software engineering text book peter Lucas Farewell Symposium......thoughts about and plans for a different software engineering text book peter Lucas Farewell Symposium...

  11. Application of value engineering technique in construction project

    International Nuclear Information System (INIS)

    Chen Changbing

    2003-01-01

    The author introduces how to apply the theories and methods of the value engineering in construction project. In the construction of a test device of the thermal hydrodynamic process, the authors have greatly reduced the construction cost and shortened the construction period by using the value engineering analyzing method. The application of value engineering in the project management is innovative. This practice indicates that the value engineering is important in many construction projects

  12. Can we restrict the health care menu?

    Science.gov (United States)

    Klein, R

    1994-02-01

    The case of Britain's National Health Service is used to illuminate the cross-national debate about whether the availability of health care should be restricted and, if so, how this should be done. Traditionally, the NHS relied on implicit rationing by clinicians within budgetary constraints set by government. However, the logic of the 1989 reforms appeared to require explicit decisions about the packages of health care to be provided to local populations. In practice, purchasers have refused to define such packages. Explicit rationing remains very much the exception. Exploring the reasons for this suggests that defining a restricted menu of health care, by adopting a cost-utility approach and excluding specific procedures or forms of treatment on the Oregon model, is only one of many policy options. There is a large repertory of policy tools for balancing demands and resources, ranging from diluting the intensity of treatment to its earlier termination. Given that health care is characterised by uncertainty, lack of information about outcomes and patient heterogeneity, it may therefore be more 'rational' to diffuse decision-making among clinicians and managers than to try to move towards a centrally determined menu of entitlements.

  13. In vitro meat: Zombies on the menu?

    OpenAIRE

    Stephens, NS

    2010-01-01

    In April 2008 the In Vitro Meat Consortium held its first meeting at the Norwegian Food Research Institute. They are a group of scientists and advocates who seek to turn the techniques of tissue engineering to the production of food, producing meat in laboratories that has at no point been part of a living animal. This is a fascinating technology, and one that fits well with the topic of this SCRIPTed analysis section: the ‘zombification’ of meat products. I have been conducting interviews wi...

  14. How descriptive menu labels influence attitudes and repatronage

    NARCIS (Netherlands)

    Wansink, B.; Painter, J.; Ittersum, van K.

    2002-01-01

    How do descriptive menu labels influence customers? In a six-week field experiment involving 140 customers, descriptive menu labels (such as "Grandma's zucchini cookies" or "succulent Italian seafood filet") increased sales by 27% and improved attitudes towards the food, attitudes towards the

  15. Menu variations for diabetes mellitus patients using Goal Programming model

    Science.gov (United States)

    Dhoruri, Atmini; Lestari, Dwi; Ratnasari, Eminugroho

    2017-08-01

    Diabetes mellitus (DM) was a chronic metabolic disease characterized by higher than normal blood glucose level (normal blood glucose level = = 80 -120 mg/dl). In this study, type 2 DM which mostly caused by unhealthy eating habits would be investigated. Related to eating habit, DM patients needed dietary menu planning with an extracare regarding their nutrients intake (energy, protein, fat and carbohydrate). Therefore, the measures taken were by organizing nutritious dietary menu for diabetes mellitus patients. Dietary menu with appropriate amount of nutrients was organized by considering the amount of calories, proteins, fats and carbohydrates. In this study, Goal Programming model was employed to determine optimal dietary menu variations for diabetes mellitus patients by paying attention to optimal expenses. According to the data obtained from hospitals in Yogyakarta, optimal menu variations would be analyzed by using Goal Programming model and would be completed by using LINGO computer program.

  16. A Literature Review of Indexing and Searching Techniques Implementation in Educational Search Engines

    Science.gov (United States)

    El Guemmat, Kamal; Ouahabi, Sara

    2018-01-01

    The objective of this article is to analyze the searching and indexing techniques of educational search engines' implementation while treating future challenges. Educational search engines could greatly help in the effectiveness of e-learning if used correctly. However, these engines have several gaps which influence the performance of e-learning…

  17. Genetic engineering possibilities for CELSS: A bibliography and summary of techniques

    Science.gov (United States)

    Johnson, E. J.

    1982-01-01

    A bibliography of the most useful techniques employed in genetic engineering of higher plants, bacteria associated with plants, and plant cell cultures is provided. A resume of state-of-the-art genetic engineering of plants and bacteria is presented. The potential application of plant bacterial genetic engineering to CELSS (Controlled Ecological Life Support System) program and future research needs are discussed.

  18. [Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

    Science.gov (United States)

    Wei, Xuelei; Dong, Fuhui

    2011-12-01

    To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

  19. Trigger Menu-aware Monitoring for the ATLAS experiment

    Science.gov (United States)

    Hoad, Xanthe; ATLAS Collaboration

    2017-10-01

    We present a“trigger menu-aware” monitoring system designed for the Run-2 data-taking of the ATLAS experiment at the LHC. Unlike Run-1, where a change in the trigger menu had to be matched by the installation of a new software release at Tier-0, the new monitoring system aims to simplify the ATLAS operational workflows. This is achieved by integrating monitoring updates in a quick and flexible manner via an Oracle DB interface. We present the design and the implementation of the menu-aware monitoring, along with lessons from the operational experience of the new system with the 2016 collision data.

  20. Modeling Techniques for a Computational Efficient Dynamic Turbofan Engine Model

    Directory of Open Access Journals (Sweden)

    Rory A. Roberts

    2014-01-01

    Full Text Available A transient two-stream engine model has been developed. Individual component models developed exclusively in MATLAB/Simulink including the fan, high pressure compressor, combustor, high pressure turbine, low pressure turbine, plenum volumes, and exit nozzle have been combined to investigate the behavior of a turbofan two-stream engine. Special attention has been paid to the development of transient capabilities throughout the model, increasing physics model, eliminating algebraic constraints, and reducing simulation time through enabling the use of advanced numerical solvers. The lessening of computation time is paramount for conducting future aircraft system-level design trade studies and optimization. The new engine model is simulated for a fuel perturbation and a specified mission while tracking critical parameters. These results, as well as the simulation times, are presented. The new approach significantly reduces the simulation time.

  1. Exploring Arduino tools and techniques for engineering wizardry

    CERN Document Server

    Blum, Jeremy

    2013-01-01

    Learn to easily build gadgets, gizmos, robots, and more using Arduino Written by Arduino expert Jeremy Blum, this unique book uses the popular Arduino microcontroller platform as an instrument to teach you about topics in electrical engineering, programming, and human-computer interaction. Whether you're a budding hobbyist or an engineer, you'll benefit from the perfectly paced lessons that walk you through useful, artistic, and educational exercises that gradually get more advanced. In addition to specific projects, the book shares best practices in programming and design that

  2. Management Science/Industrial Engineering Techniques to Reduce Food Costs.

    Science.gov (United States)

    Greenberg, Murray

    This paper examines the contributions of Industrial Engineering and Management Science toward reduction in the cost of production and distribution of food. Food processing firms were requested to respond to a questionnaire which asked for examples of their use of various operations research tools and information on the number of operations…

  3. Use of electrical resistivity technique for engineering site investigation

    African Journals Online (AJOL)

    The presence of moderately thick (1.5 – 16.5m) clay has been established in this area; therefore the use of raft foundation and/or any other foundation that is commensurate with civil engineering standard is suggested for high rise structures. Keywords: bedrock integrity, transverse unit resistance, foundation. Global Journal ...

  4. Restaurant Menu Labeling Policy: Review of Evidence and Controversies

    Science.gov (United States)

    VanEpps, Eric M.; Roberto, Christina A.; Park, Sara; Economos, Christina D.; Bleich, Sara N.

    2016-01-01

    In response to high rates of obesity in the USA, several American cities, counties, and states have passed laws requiring restaurant chains to post labels identifying the energy content of items on menus, and nationwide implementation of menu labeling is expected in late 2016. In this review, we identify and summarize the results of 16 studies that have assessed the impact of real-world numeric calorie posting. We also discuss several controversies surrounding the US Food and Drug Administration's implementation of federally mandated menu labeling. Overall, the evidence regarding menu labeling is mixed, showing that labels may reduce the energy content of food purchased in some contexts, but have little effect in other contexts. However, more data on a range of ong-term consumption habits and restaurant responses is needed to fully understand the impact menu labeling laws will have on the US population's diet. PMID:26877095

  5. Coldness applied to plastic engineering techniques and rooms; Le froid applique aux techniques de la plasturgie et a ses locaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This technical dossier is the result of a collaboration between the CFE, EdF Industrie and the French federation of plastic engineering. It aims at answering all questions relative to plastic materials processing: 1 - general study on the economical aspects of plastic engineering, plastic materials, and manufacturing processes; 2 - the different cold processing techniques (air cooling and refrigerating systems); 3 - the main transformation processes for thermo-plastic materials and the advantage of cooling techniques; 4 - the environmental conditioning of rooms (clean rooms); 5 - examples of realizations. (J.S.)

  6. Effect of different children's menu labeling designs on family purchases.

    Science.gov (United States)

    Holmes, Ashley S; Serrano, Elena L; Machin, Jane E; Duetsch, Thomas; Davis, George C

    2013-03-01

    The majority of labeling studies at restaurants have focused on adults, not children, and utilized cross-sectional data with one menu labeling design, typically calorie information. The aim of this longitudinal study was to examine the effect of three different menu labeling designs for children's meals on total calories and fat selected by families. Each menu was implemented for 2months. Patrons' purchases were tracked from a control menu (with no nutrition information) through all three theoretically-based designs: calorie and fat information; followed by symbols denoting healthier choices; then nutrition bargain price. All menus were created specifically for the study. They featured six combination meals (pre-determined entrees and side items) and a la carte items (entrees and side items that could be ordered separately). Only combination meals contained labeling. Fixed effects models were estimated to detect changes in sales for each menu labeling design compared to the control. Overall, menu labeling did not result in a positive net effect on total calories or fat purchased by families, but resulted in significant shifts in purchases of combination and a la carte meals and healthy and unhealthy options. The most significant impact was seen for nutrition bargain price labeling, the last design. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Molecular profiling techniques as tools to detect potential unintended effects in genetically engineered maize

    CSIR Research Space (South Africa)

    Barros, E

    2010-05-01

    Full Text Available Molecular Profiling Techniques as Tools to Detect Potential Unintended Effects in Genetically Engineered Maize Eugenia Barros Introduction In the early stages of production and commercialization of foods derived from genetically engineered (GE) plants... systems. In a recent paper published in Plant Biotechnology Journal,4 we compared two transgenic white maize lines with the non-transgenic counterpart to investigate two possible sources of variation: genetic engineering and environmental variation...

  8. Scheduling techniques in the Request Oriented Scheduling Engine (ROSE)

    Science.gov (United States)

    Zoch, David R.

    1991-01-01

    Scheduling techniques in the ROSE are presented in the form of the viewgraphs. The following subject areas are covered: agenda; ROSE summary and history; NCC-ROSE task goals; accomplishments; ROSE timeline manager; scheduling concerns; current and ROSE approaches; initial scheduling; BFSSE overview and example; and summary.

  9. The effect of menu labeling with calories and exercise equivalents on food selection and consumption.

    Science.gov (United States)

    Platkin, Charles; Yeh, Ming-Chin; Hirsch, Kimberly; Wiewel, Ellen Weiss; Lin, Chang-Yun; Tung, Ho-Jui; Castellanos, Victoria H

    2014-01-01

    Better techniques are needed to help consumers make lower calorie food choices. This pilot study examined the effect of menu labeling with caloric information and exercise equivalents (EE) on food selection. Participants, 62 females, ages 18-34, recruited for this study, ordered a fast food meal with menus that contained the names of the food (Lunch 1 (L1), control meal). One week later (Lunch 2 (L2), experiment meal), participants ordered a meal from one of three menus with the same items as the previous week: no calorie information, calorie information only, or calorie information and EE. There were no absolute differences between groups in calories ordered from L1 to L2. However, it is noteworthy that calorie only and calorie plus exercise equivalents ordered about 16% (206 kcal) and 14% (162 kcal) fewer calories from Lunch 1 to Lunch 2, respectively; whereas, the no information group ordered only 2% (25 kcal) fewer. Menu labeling alone may be insufficient to reduce calories; however, further research is needed in finding the most effective ways of presenting the menu labels for general public.

  10. Development of engineering scale HLLW vitrification technique at PNC

    International Nuclear Information System (INIS)

    Nagaki, H.; Oguino, N.; Tsunoda, N.; Segawa, T.

    1979-01-01

    Some processes have been investigated to develop the technology of solidification of the high-level radioactive liquid waste generated from the nuclear fuel reprocessing plant operated by the Power Reactor and Nuclear Fuel Development Corporation (PNC) at Tokai-mura. This report covers the present state of development of a Joule-heated ceramic melter and a direct megahertz induction-heated melter. Engineering-scale tests have been performed with both melters. The Joule-heated melter could produce 45 kg or 16 liters of glass per hour. The direct-induction furnace was able to melt 5 kg or 1.8 liters of glass per hour. Both melters were composed of electrofused cast refractory brick. Thus it was possible to melt the glass at above 1200 0 C. Glass produced at higher melting temperatures is generally superior. 3 figures, 2 tables

  11. Environmental sensitive road planning and transportation techniques in forest engineering

    Directory of Open Access Journals (Sweden)

    H. Hulusi Acar

    2016-07-01

    Full Text Available Forestry management has activities dealing with technical, economic, social and environmental services. Forestry operations which are carried out on forest areas , an important part of the ecosistem are materialized in open space. This forestry activities on large areas and high sloping generally, include many different techniques. It is needed primarily to the forest road network in terms of forest management. Determining the approriate route in the natural environment, planning and road construction affairs for forest roads which are necessary accessing in forest areas, is also of great importance from an environmental viewpoint as well as technical and economic manner. Forest road planning which can not be changed later and left a permanent mark on the natural environment carries much more importance to the environment especially on sloping land. This is because, it is important choosing correct type of roaf structure, and doing periodic maintenance of the roads. Skidding activities, after wood production, is important in terms of its impact on forest soil and by means of effects on saplings and trees on the releated forest areas.The development of environmental sensitive techniques is difficult, limited or expensive for this wood extraction works which are made more difficult conditons in the sloping terrain. Therefore, especially in using some silvicultural methods wood extraction damages are even greater. In this study; some road planning, road construction and wood extraction techniques which performed by me have been made to examine the environmental aspects. Environment-friendly forest roads and primary transport techniques on the forest ecosystem are briefly explained and discussed in the frame of the environmental aspects.

  12. Plagiarism detection and prevention techniques in engineering education

    OpenAIRE

    Halak, Basel; El-Hajjar, Mohammed

    2016-01-01

    Plagiarism seriously damages the education process in a number of ways; it prevents students from developing the skills of creative thinking and critical analysis; it undermines the trust between lectures and students, and if goes undetected, it can impact the reputation of the academic institution and devalue its degrees. In this paper, we present two techniques for plagiarism detection and prevention. The first method is based on the allocation of a unique assignment for each student, and t...

  13. Development of optical techniques for chemical engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Lamadie, F.; Charton, S.; Langlard, M. de; Ouattara, M.; Sentis, M. [CEA, Centre de Marcoule, DEN,DTEC,SGCS, F-30207 Marcoule (France)

    2016-07-01

    The design of separation processes for nuclear spend fuel treatment, dedicated to either research studies or industrial applications, is currently based on a phenomenological approach, relying on Computational Fluid Dynamics, and complemented by validation tests performed at small-scale. Indeed, most of the steps of the Purex process involve multiphasic flows (dissolution, leaching, liquid-liquid extraction, precipitation, filtration, etc.). Therefore an accurate knowledge of the dispersed phase properties is required in order to assess their coupling with the flow features, to predict the process performance and efficiency and to achieve size reduction or extrapolation. Hence, the measurements of particulate flows properties, and especially the particles (or drops or bubbles) size distribution, concentration (i.e. hold-up) and velocity has become a growing issue. Relevant techniques for measuring these flow properties are multiple, from the high-speed video acquisition coupled to image processing to the laser-induced fluorescence, including the particle imaging velocimetry or interferometric techniques (digital in-line holography, rainbow refractometry, etc.). In this communication, different techniques developed at CEA Marcoule for the characterization of multiphase flows, will be introduced. The strong interaction with computational fluid dynamics, in the scope of a multi-scale approach, will be discussed through typical results of gas-liquid, liquid-liquid and solid-liquid flows possibly encountered in nuclear fuel reprocessing process. (authors)

  14. Wear studies of engine components using neutron activation techniques

    International Nuclear Information System (INIS)

    Banados Perez, H.E.; Carvalho, G.; Daltro, T.F.L.

    1984-01-01

    The results obtained in a series of tests for determining the wearing rate of some diesel engine components are reported. The pieces investigated were the needles of fuel injection nozzles, that were previously irradiated with a 10 13 nv in the IEA-R1 nuclear reactor, and the wearing rate was established for different types of fuels. Total wear was calculated by measuring the specific activity of 51 Cr present in the fuel and originated by metal particles worn from the needle. Wear were performed using a device that simulated the actual working conditions of the injection nozzles. The system was run during 350 hours and, along that period, 36 fuel samples of 10 ml each, were collected and analysed for cumulative wear calculation. A metal concentration as low as 10- 6 g in 10 ml of fuel sample could be measured by this method. At present time this procedure is being applied for measuring the wear-rate of other nozzle parts, using localized neutron activation techiques. (Author) [pt

  15. Increasing the reliability of ecological models using modern software engineering techniques

    Science.gov (United States)

    Robert M. Scheller; Brian R. Sturtevant; Eric J. Gustafson; Brendan C. Ward; David J. Mladenoff

    2009-01-01

    Modern software development techniques are largely unknown to ecologists. Typically, ecological models and other software tools are developed for limited research purposes, and additional capabilities are added later, usually in an ad hoc manner. Modern software engineering techniques can substantially increase scientific rigor and confidence in ecological models and...

  16. Risk assessment techniques with applicability in marine engineering

    Science.gov (United States)

    Rudenko, E.; Panaitescu, F. V.; Panaitescu, M.

    2015-11-01

    Nowadays risk management is a carefully planned process. The task of risk management is organically woven into the general problem of increasing the efficiency of business. Passive attitude to risk and awareness of its existence are replaced by active management techniques. Risk assessment is one of the most important stages of risk management, since for risk management it is necessary first to analyze and evaluate risk. There are many definitions of this notion but in general case risk assessment refers to the systematic process of identifying the factors and types of risk and their quantitative assessment, i.e. risk analysis methodology combines mutually complementary quantitative and qualitative approaches. Purpose of the work: In this paper we will consider as risk assessment technique Fault Tree analysis (FTA). The objectives are: understand purpose of FTA, understand and apply rules of Boolean algebra, analyse a simple system using FTA, FTA advantages and disadvantages. Research and methodology: The main purpose is to help identify potential causes of system failures before the failures actually occur. We can evaluate the probability of the Top event.The steps of this analize are: the system's examination from Top to Down, the use of symbols to represent events, the use of mathematical tools for critical areas, the use of Fault tree logic diagrams to identify the cause of the Top event. Results: In the finally of study it will be obtained: critical areas, Fault tree logical diagrams and the probability of the Top event. These results can be used for the risk assessment analyses.

  17. The Application of Advanced Technique of Fan Frame Unit on High Bypass Ratio Aero Engine

    Directory of Open Access Journals (Sweden)

    Hou Peng

    2017-01-01

    Full Text Available High bypass ratio aero-engine was widely used on military and civil aviation domain, as the power of larger aircraft. Fan frame unit was the main bearing frame of high bypass ratio aero-engine, which composed of strut, HUB MID BOX and external bypass parts. Resin/composite was used on external bypass parts(acoustic liner, containment ring, fan outlet guide vane and fan case skin fillets, which not only reduced the weight and manufacturing cost, but also improved the noise absorption, containment and anti-fatigue ability of engine. The design of composite was becoming a key technique for high bypass ratio aero-engine. In special test of the core engine, nitrogen cooling system was designed to cool the cavity of spool. The nitrogen pipeline passed through the inner cavity of fan frame, then inserted into NO. 3 bearing seal, so nitrogen gas was sent into the cavity of core engine spool. On high bypass ratio aero-engine, the external bypass and fan frame inner cavity were the design platform for advanced technique, such as composite and pipeline system, and also provided guarantee for reliable operation of engine.

  18. Trigger Menu-aware Monitoring for the ATLAS experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00441925; The ATLAS collaboration

    2017-01-01

    Changes in the trigger menu, the online algorithmic event-selection of the ATLAS experiment at the LHC, are followed by adjustments to the ATLAS trigger monitoring systems. During Run 1, and so far in Run 2, ATLAS has deployed monitoring updates with the installation of new software releases at Tier-0, the first level of the ATLAS computing grid. Having to wait for a new software release to be installed at Tier-0, in order to update ATLAS offline trigger monitoring configurations, results in a lag with respect to the modification of the trigger menu. We present the design and implementation of a `trigger menu-aware' monitoring system that aims to simplify the ATLAS operational workflows by allowing monitoring configuration changes to be made at the Tier-0 site by utilising an Oracle SQL database.

  19. A Typology of Techniques for Motivation of Personnel at Mechanical Engineering Enterprises

    Directory of Open Access Journals (Sweden)

    Melnyk Olga G.

    2015-03-01

    Full Text Available The purpose of the article is to develop a typology of techniques for motivation of personnel at mechanical engineering enterprises providing for systematization of their forms on the basis of a number of the existing features and identified new ones, which are justified by the requirements of today. There has been proved the fragmentary character of developments in this area making it impossible to form basic prerequisites for studying the concept. It has been found that certain features of the typology of methods for motivating employees may also be signs of a typology of techniques for motivation of personnel at enterprises of mechanical engineering industry. Among the current signs of a typology of techniques for motivation of personnel at mechanical engineering enterprises it is proposed to use the following ones: the nature of the impact; results obtained, object of the impact; direction; nature of the objectives; scope of the anticipated changes in the existing motivation system; nature of the needs, at which the techniques are directed. In addition, expediency of introducing new features of the typology, namely: the novelty level (classic and innovative motivation techniques, level of individualization (individual and standard; level of formalization (formalized at the high, medium and low level, source of the need for formation and implementation (the techniques, which necessity is specified by the enterprise, and the techniques, which necessity is specified by the business environment, origin («field» and «office» ones. These results allow forming a holistic view of the diversity of techniques for motivation of personnel at mechanical engineering enterprises as well as reasonable choosing among them their individual types at improving the motivation system. Prospects for further research in this direction should be allocation and systematization of the factors influencing the choice of one or another technique for motivation of

  20. Mathematical Approach For Serving Nutritious Menu For Secondary School Student Using “Delete-Reshuffle-Reoptimize Algorithm”

    Science.gov (United States)

    Sudin, Azila M.; Sufahani, Suliadi

    2018-04-01

    Secondary school student need to eat a well nutritious and healthy food that gives enough supplements for improvement, safeguarding and rebuilding the human body. In addition, with legitimate supplement, it can keep any undesirable diseases and infections. At this moment, medicinal disclosure demonstrates that by expending very much adjusted nutritious sustenance, it can anticipate and decrease the dangers of certain illness. Menu organizers, nutritionist and dietitians faced with mind boggling undertakings and inconveniences obstacles to grow human wellbeing. Serving more beneficial meal is a noteworthy step towards accomplishing one of the objectives for this study. However reorganizing a nutritious and well balanced menu by hand is difficult, insufficient and time consuming. The target of this study is to build up a mathematical technique for menu scheduling that fulfill the whole supplement prerequisite for secondary school student, reduce processing time, minimize the budget and furthermore serve assortment type of food consistently. It additionally gives the adaptability for the cook to change any favored menu even after the ideal arrangement and optimal solution has been acquired. A recalculation procedure will be performed in light of the ideal arrangement. The data was obtained from the Ministry of Health Malaysian and school specialists. The model was solved by using Binary Programming and “Delete-Reshuffle-Reoptimize Algorithm”.

  1. The application of LQR synthesis techniques to the turboshaft engine control problem. [Linear Quadratic Regulator

    Science.gov (United States)

    Pfeil, W. H.; De Los Reyes, G.; Bobula, G. A.

    1985-01-01

    A power turbine governor was designed for a recent-technology turboshaft engine coupled to a modern, articulated rotor system using Linear Quadratic Regulator (LQR) and Kalman Filter (KF) techniques. A linear, state-space model of the engine and rotor system was derived for six engine power settings from flight idle to maximum continuous. An integrator was appended to the fuel flow input to reduce the steady-state governor error to zero. Feedback gains were calculated for the system states at each power setting using the LQR technique. The main rotor tip speed state is not measurable, so a Kalman Filter of the rotor was used to estimate this state. The crossover of the system was increased to 10 rad/s compared to 2 rad/sec for a current governor. Initial computer simulations with a nonlinear engine model indicate a significant decrease in power turbine speed variation with the LQR governor compared to a conventional governor.

  2. The application of LQR synthesis techniques to the turboshaft engine control problem

    Science.gov (United States)

    Pfeil, W. H.; De Los Reyes, G.; Bobula, G. A.

    1984-01-01

    A power turbine governor was designed for a recent-technology turboshaft engine coupled to a modern, articulated rotor system using Linear Quadratic Regulator (LQR) and Kalman Filter (KF) techniques. A linear, state-space model of the engine and rotor system was derived for six engine power settings from flight idle to maximum continuous. An integrator was appended to the fuel flow input to reduce the steady-state governor error to zero. Feedback gains were calculated for the system states at each power setting using the LQR technique. The main rotor tip speed state is not measurable, so a Kalman Filter of the rotor was used to estimate this state. The crossover of the system was increased to 10 rad/s compared to 2 rad/sec for a current governor. Initial computer simulations with a nonlinear engine model indicate a significant decrease in power turbine speed variation with the LQR governor compared to a conventional governor.

  3. Study of wear in piston ring of the vehicle engine using thin layer activation technique

    International Nuclear Information System (INIS)

    Khan, I.H.; Farooq, M.; Ghiyas-ud-Din; Gul, S.; Qureshi, R.M.; Jin Joon Ha; Wallace, G.

    2004-01-01

    Thin Layer Activation (TLA) technique was used to investigate piston ring wear of a six cylinders vehicle engine at various engine speeds and load conditions. The activated ring was installed in cylinder no.5 of the engine at middle position (compression ring). Monitoring was carried out on-line (extremely on the engine block) using 'Thin Layer Difference Method'. The calibration curve of the activity profile was prepared with the help of activation parameters determined at the time of ring activation in particle accelerator. The results show that the piston ring wear varies from 0.309 micron/hour to 0.404 micron/hour at given engine speed and load conditions. (author)

  4. Analytical Modelling of the Effects of Different Gas Turbine Cooling Techniques on Engine Performance =

    Science.gov (United States)

    Uysal, Selcuk Can

    In this research, MATLAB SimulinkRTM was used to develop a cooled engine model for industrial gas turbines and aero-engines. The model consists of uncooled on-design, mean-line turbomachinery design and a cooled off-design analysis in order to evaluate the engine performance parameters by using operating conditions, polytropic efficiencies, material information and cooling system details. The cooling analysis algorithm involves a 2nd law analysis to calculate losses from the cooling technique applied. The model is used in a sensitivity analysis that evaluates the impacts of variations in metal Biot number, thermal barrier coating Biot number, film cooling effectiveness, internal cooling effectiveness and maximum allowable blade temperature on main engine performance parameters of aero and industrial gas turbine engines. The model is subsequently used to analyze the relative performance impact of employing Anti-Vortex Film Cooling holes (AVH) by means of data obtained for these holes by Detached Eddy Simulation-CFD Techniques that are valid for engine-like turbulence intensity conditions. Cooled blade configurations with AVH and other different external cooling techniques were used in a performance comparison study. (Abstract shortened by ProQuest.).

  5. 75 FR 68361 - Agency Information Collection Activities; Proposed Collection; Comment Request; Restaurant Menu...

    Science.gov (United States)

    2010-11-05

    ...] Agency Information Collection Activities; Proposed Collection; Comment Request; Restaurant Menu and... appropriate, and other forms of information technology. Restaurant Menu and Vending Machine Labeling... restaurants and similar retail food establishments (SRFE) with 20 or more locations doing business under the...

  6. Proceedings of the national seminar on advanced construction techniques and geotechnical engineering

    International Nuclear Information System (INIS)

    Partheeban, P.; Poornima, C.A.; Guru, V.

    2015-02-01

    The objective of this seminar is to emphasize the need for developing modern construction materials in the era of technology. It also provides a forum for National Research Scholars, Construction Specialists and Professionals, Planners, Faculty, PG and UG Students to discuss and evolve solutions for various difficulties faced during construction. Theme of seminar includes Geotechnical site Investigation, Ground improvement Techniques, Soil Dynamics, Geotechnical Earthquake Engineering, Geo- Environmental Engineering, Self Compacting Concrete, Geopolymer Concrete and Concrete Technology, Cost Effective Construction Techniques, Limit state performance state approach Elastic and Elasto-plastic behavior and Reduction of Corrosion in concrete using Chemical admixtures. Paper relevant to INIS are indexed separately

  7. The CMS experiment puts physics onto the menu

    CERN Document Server

    Leonidopoulos, Christos

    2011-01-01

    CMS has addressed the challenge of identifying in real time different kinds of 
physics at the LHC – from the "bread and butter" of Standard Model processes to 
signals of new particles – with triggers served up according to a carefully designed menu.

  8. Database 'catalogue of techniques applied to materials and products of nuclear engineering'

    International Nuclear Information System (INIS)

    Lebedeva, E.E.; Golovanov, V.N.; Podkopayeva, I.A.; Temnoyeva, T.A.

    2002-01-01

    The database 'Catalogue of techniques applied to materials and products of nuclear engineering' (IS MERI) was developed to provide informational support for SSC RF RIAR and other enterprises in scientific investigations. This database contains information on the techniques used at RF Minatom enterprises for reactor material properties investigation. The main purpose of this system consists in the assessment of the current status of the reactor material science experimental base for the further planning of experimental activities and methodical support improvement. (author)

  9. Impact of Menu Sequencing on Internet-Based Educational Module Selection

    Science.gov (United States)

    Bensley, Robert; Brusk, John J.; Rivas, Jason; Anderson, Judith V.

    2006-01-01

    Patterns of Internet-based menu item selection can occur for a number of reasons, many of which may not be based on interest in topic. It then becomes important to ensure menu order is devised in a way that ensures the greatest accuracy in matching user need with selection. This study examined the impact of menu rotation on the selection of…

  10. The development of quality management techniques in civil engineering design and site supervision

    International Nuclear Information System (INIS)

    Cowan, A.J.

    1991-01-01

    Quality assurance techniques have developed considerably over the past few years, and in particular the application of Quality Management within a service industry such as civil engineering has evolved into a well developed management control system. James Williamson and Partners were the first members of the Association of Consulting Engineers successfully to achieve third party accreditation with BSI for civil and structural design. The initial system was generated for work on Torness Power Station in the early 1980s, and the firm has, in the last ten years, developed a flexible quality system to effectively control and co-ordinate complex projects. This paper discusses the use of quality assurance (QA) techniques in a civil engineering design office, looking at a few areas where the requirements of BS 5750 and BS 5882 are difficult to interpret. Some observations are also made on the adoption of QA for site supervision. (author)

  11. A Hybrid Neural Network-Genetic Algorithm Technique for Aircraft Engine Performance Diagnostics

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2001-01-01

    In this paper, a model-based diagnostic method, which utilizes Neural Networks and Genetic Algorithms, is investigated. Neural networks are applied to estimate the engine internal health, and Genetic Algorithms are applied for sensor bias detection and estimation. This hybrid approach takes advantage of the nonlinear estimation capability provided by neural networks while improving the robustness to measurement uncertainty through the application of Genetic Algorithms. The hybrid diagnostic technique also has the ability to rank multiple potential solutions for a given set of anomalous sensor measurements in order to reduce false alarms and missed detections. The performance of the hybrid diagnostic technique is evaluated through some case studies derived from a turbofan engine simulation. The results show this approach is promising for reliable diagnostics of aircraft engines.

  12. Cognitive Mapping Techniques: Implications for Research in Engineering and Technology Education

    Science.gov (United States)

    Dixon, Raymond A.; Lammi, Matthew

    2014-01-01

    The primary goal of this paper is to present the theoretical basis and application of two types of cognitive maps, concept map and mind map, and explain how they can be used by educational researchers in engineering design research. Cognitive mapping techniques can be useful to researchers as they study students' problem solving strategies…

  13. Ultrasound Imaging Techniques for Spatiotemporal Characterization of Composition, Microstructure, and Mechanical Properties in Tissue Engineering.

    Science.gov (United States)

    Deng, Cheri X; Hong, Xiaowei; Stegemann, Jan P

    2016-08-01

    Ultrasound techniques are increasingly being used to quantitatively characterize both native and engineered tissues. This review provides an overview and selected examples of the main techniques used in these applications. Grayscale imaging has been used to characterize extracellular matrix deposition, and quantitative ultrasound imaging based on the integrated backscatter coefficient has been applied to estimating cell concentrations and matrix morphology in tissue engineering. Spectral analysis has been employed to characterize the concentration and spatial distribution of mineral particles in a construct, as well as to monitor mineral deposition by cells over time. Ultrasound techniques have also been used to measure the mechanical properties of native and engineered tissues. Conventional ultrasound elasticity imaging and acoustic radiation force imaging have been applied to detect regions of altered stiffness within tissues. Sonorheometry and monitoring of steady-state excitation and recovery have been used to characterize viscoelastic properties of tissue using a single transducer to both deform and image the sample. Dual-mode ultrasound elastography uses separate ultrasound transducers to produce a more potent deformation force to microscale characterization of viscoelasticity of hydrogel constructs. These ultrasound-based techniques have high potential to impact the field of tissue engineering as they are further developed and their range of applications expands.

  14. A New Project-Based Curriculum of Design Thinking with Systems Engineering Techniques

    NARCIS (Netherlands)

    Haruyama, S.; Kim, S.K.; Beiter, K.A.; Dijkema, G.P.J.; De Weck, O.L.

    2012-01-01

    We developed a new education curriculum called "ALPS" (Active Learning Project Sequence) at Keio University that emphasizes team project-based learning and design thinking with systems engineering techniques. ALPS is a 6 month course, in which students work as a team and design and propose

  15. Development and application of laser techniques for studying fuel dynamics and NO formation in engines

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Oeivind

    2000-11-01

    In this work a number of laser techniques have been applied in new ways for combustion diagnostics in engines. The applications cover small two-stroke engines, ordinary spark ignition (SI) engines, direct-injection spark ignition (DISI) engines, and heavy-duty diesel truck engines. In an investigation of unmodified two-stroke engines running at high engine speed, it has been shown that cycle-resolved laser diagnostics are applicable to real-world engines. The emission of unburned fuel was detected at the exhaust port with successful discrimination against other unburned hydrocarbons. Although a few problems remain to be solved in order to get quantitative concentration data, valuable information can nonetheless be attained using this technique. The technique would benefit from the use of a non-fluorescing lubricant, as that would decrease the background fluorescence. Laser-based techniques also provide a useful tool for studying the fuel dynamics inside the cylinder. In the development of DISI engines it is of particular importance to acquire knowledge about the distribution of fuel around the spark plug. Numerical computer codes are often used as design tools in these applications. Laser techniques are capable of yielding instantaneous multi-point concentration information with high spatial and temporal resolution, making them ideal both for validation of CFD simulations and for testing designs. The feasibility of using laser diagnostics in the development of DISI engines has been shown. Future research should be aimed at simplifying the procedure for quantifying the data, since a fairly simple and reliable technique would be an important asset for the industry. In a more fundamental study, it has been shown that it is possible to simultaneously detect a substance in both liquid and vapour phase. Water was used in the study since it is easily produced in both phases. Liquid drops were detected using spontaneous Raman scattering, whereas the vapour surrounding them

  16. Development and application of laser techniques for studying fuel dynamics and NO formation in engines

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Oeivind

    2000-11-01

    In this work a number of laser techniques have been applied in new ways for combustion diagnostics in engines. The applications cover small two-stroke engines, ordinary spark ignition (SI) engines, direct-injection spark ignition (DISI) engines, and heavy-duty diesel truck engines. In an investigation of unmodified two-stroke engines running at high engine speed, it has been shown that cycle-resolved laser diagnostics are applicable to real-world engines. The emission of unburned fuel was detected at the exhaust port with successful discrimination against other unburned hydrocarbons. Although a few problems remain to be solved in order to get quantitative concentration data, valuable information can nonetheless be attained using this technique. The technique would benefit from the use of a non-fluorescing lubricant, as that would decrease the background fluorescence. Laser-based techniques also provide a useful tool for studying the fuel dynamics inside the cylinder. In the development of DISI engines it is of particular importance to acquire knowledge about the distribution of fuel around the spark plug. Numerical computer codes are often used as design tools in these applications. Laser techniques are capable of yielding instantaneous multi-point concentration information with high spatial and temporal resolution, making them ideal both for validation of CFD simulations and for testing designs. The feasibility of using laser diagnostics in the development of DISI engines has been shown. Future research should be aimed at simplifying the procedure for quantifying the data, since a fairly simple and reliable technique would be an important asset for the industry. In a more fundamental study, it has been shown that it is possible to simultaneously detect a substance in both liquid and vapour phase. Water was used in the study since it is easily produced in both phases. Liquid drops were detected using spontaneous Raman scattering, whereas the vapour surrounding them

  17. Identification of the Scale of Changes in Personnel Motivation Techniques at Mechanical-Engineering Enterprises

    Directory of Open Access Journals (Sweden)

    Melnyk Olga G.

    2016-02-01

    Full Text Available The method for identification of the scale of changes in personnel motivation techniques at mechanical-engineering enterprises based on structural and logical sequence of implementation of relevant stages (identification of the mission, strategy and objectives of the enterprise; forecasting the development of the enterprise business environment; SWOT-analysis of actual motivation techniques, deciding on the scale of changes in motivation techniques, choosing providers for changing personnel motivation techniques, choosing an alternative to changing motivation techniques, implementation of changes in motivation techniques; control over changes in motivation techniques. It has been substantiated that the improved method enables providing a systematic and analytical justification for management decisionmaking in this field and choosing the best for the mechanical-engineering enterprise scale and variant of changes in motivation techniques. The method for identification of the scale of changes in motivation techniques at mechanical-engineering enterprises takes into account the previous, current and prospective character. Firstly, the approach is based on considering the past state in the motivational sphere of the mechanical-engineering enterprise; secondly, the method involves identifying the current state of personnel motivation techniques; thirdly, within the method framework the prospective, which is manifested in strategic vision of the enterprise development as well as in forecasting the development of its business environment, is taken into account. The advantage of the proposed method is that the level of its specification may vary depending on the set goals, resource constraints and necessity. Among other things, this method allows integrating various formalized and non-formalized causal relationships in the sphere of personnel motivation at machine-building enterprises and management of relevant processes. This creates preconditions for a

  18. A Cluster Randomized Trial to Promote Healthy Menu Items for Children: The Kids' Choice Restaurant Program.

    Science.gov (United States)

    Ayala, Guadalupe X; Castro, Iana A; Pickrel, Julie L; Lin, Shih-Fan; Williams, Christine B; Madanat, Hala; Jun, Hee-Jin; Zive, Michelle

    2017-12-01

    Evidence indicates that restaurant-based interventions have the potential to promote healthier purchasing and improve the nutrients consumed. This study adds to this body of research by reporting the results of a trial focused on promoting the sale of healthy child menu items in independently owned restaurants. Eight pair-matched restaurants that met the eligibility criteria were randomized to a menu-only versus a menu-plus intervention condition. Both of the conditions implemented new healthy child menu items and received support for implementation for eight weeks. The menu-plus condition also conducted a marketing campaign involving employee trainings and promotional materials. Process evaluation data captured intervention implementation. Sales of new and existing child menu items were tracked for 16 weeks. Results indicated that the interventions were implemented with moderate to high fidelity depending on the component. Sales of new healthy child menu items occurred immediately, but decreased during the post-intervention period in both conditions. Sales of existing child menu items demonstrated a time by condition effect with restaurants in the menu-plus condition observing significant decreases and menu-only restaurants observing significant increases in sales of existing child menu items. Additional efforts are needed to inform sustainable methods for improving access to healthy foods and beverages in restaurants.

  19. A Cluster Randomized Trial to Promote Healthy Menu Items for Children: The Kids’ Choice Restaurant Program

    Science.gov (United States)

    Ayala, Guadalupe X.; Castro, Iana A.; Pickrel, Julie L.; Lin, Shih-Fan; Williams, Christine B.; Madanat, Hala; Jun, Hee-Jin; Zive, Michelle

    2017-01-01

    Evidence indicates that restaurant-based interventions have the potential to promote healthier purchasing and improve the nutrients consumed. This study adds to this body of research by reporting the results of a trial focused on promoting the sale of healthy child menu items in independently owned restaurants. Eight pair-matched restaurants that met the eligibility criteria were randomized to a menu-only versus a menu-plus intervention condition. Both of the conditions implemented new healthy child menu items and received support for implementation for eight weeks. The menu-plus condition also conducted a marketing campaign involving employee trainings and promotional materials. Process evaluation data captured intervention implementation. Sales of new and existing child menu items were tracked for 16 weeks. Results indicated that the interventions were implemented with moderate to high fidelity depending on the component. Sales of new healthy child menu items occurred immediately, but decreased during the post-intervention period in both conditions. Sales of existing child menu items demonstrated a time by condition effect with restaurants in the menu-plus condition observing significant decreases and menu-only restaurants observing significant increases in sales of existing child menu items. Additional efforts are needed to inform sustainable methods for improving access to healthy foods and beverages in restaurants. PMID:29194392

  20. A Cluster Randomized Trial to Promote Healthy Menu Items for Children: The Kids’ Choice Restaurant Program

    Directory of Open Access Journals (Sweden)

    Guadalupe X. Ayala

    2017-12-01

    Full Text Available Evidence indicates that restaurant-based interventions have the potential to promote healthier purchasing and improve the nutrients consumed. This study adds to this body of research by reporting the results of a trial focused on promoting the sale of healthy child menu items in independently owned restaurants. Eight pair-matched restaurants that met the eligibility criteria were randomized to a menu-only versus a menu-plus intervention condition. Both of the conditions implemented new healthy child menu items and received support for implementation for eight weeks. The menu-plus condition also conducted a marketing campaign involving employee trainings and promotional materials. Process evaluation data captured intervention implementation. Sales of new and existing child menu items were tracked for 16 weeks. Results indicated that the interventions were implemented with moderate to high fidelity depending on the component. Sales of new healthy child menu items occurred immediately, but decreased during the post-intervention period in both conditions. Sales of existing child menu items demonstrated a time by condition effect with restaurants in the menu-plus condition observing significant decreases and menu-only restaurants observing significant increases in sales of existing child menu items. Additional efforts are needed to inform sustainable methods for improving access to healthy foods and beverages in restaurants.

  1. Determination of wear metals in engine oil by PIXE and RBS technique

    Energy Technology Data Exchange (ETDEWEB)

    Alkofahi, M M [Physics Dept., Yarmouk university, Irbid, (Jordan)

    1995-10-01

    The constituents of fresh and used engine oil were determined by PIXE and RBS techniques using 2 MeV He{sup ++} ion beams. The concentration of generated wear metals in used engine oil was measured as a function of running kilometers. The fresh oil was found to contain the elements: Si, P, S, Cl, K, Ca, and Fe. In addition to theses elements, Pb and Br were found in the used oil. Changes in the concentrations of S, Zn and Br were noticed as the running kilometers increased. 6 figs., 2 tabs.

  2. Positron emission tomography - a new technique for observing fluid behaviour in engineering systems

    International Nuclear Information System (INIS)

    Stewart, P.A.E.; Rogers, J.D.; Skelton, R.T.

    1988-01-01

    Positron emission tomography promises to become a powerful new technique for flow tracing and measurement within metal structures in general and operating engines in particular. The principles involved are outlined, and a mobile positron camera system being developed jointly by Rolls-Royce, Castrol, the University of Birmingham and the Rutherford-Appleton Laboratory of the SERC is described. Finally, illustrative examples of the camera's capability are presented drawn from its use to study lubricating fluid flow in the bearings of a Viper gas turbine engine on test up to 100% full power. (author)

  3. Introduction to digital instrumentation and control techniques used in nuclear engineering

    International Nuclear Information System (INIS)

    Kurilla, R.G.; Kenney, E.S.

    1988-01-01

    For the past 8 yr, the nuclear engineering department at Pennsylvania State University has been teaching a digital interfacing class at the undergraduate (senior) level. With the ever-increasing use of computers in the nuclear engineering area (such as in the use of automated data acquisition systems) and the complexity of control instrumentation, more than a cursory introduction into electronics and computer controls is needed. Because of the ever-increasing popularity, and hence importance, of IBM-PC compatible microcomputers in the engineering fields, the program has been adapted to the Intel 8086 microprocessor. Courses such as this one are helpful in ensuring the students have an adequate design and practice base as required by accrediting groups. The course, is composed of three parts: (1) machine code/assembly language, (2) interfacing, and (3) final project. Experience demonstrates that a course of this inherent complexity can successfully be taught within a nuclear engineering curriculum without extensive prerequisites. The important ingredient is to treat nuclear engineering students for exactly what they are, engineers. By having them use their creativity and adaptability, they can successfully integrate the digital interfacing techniques now routinely used in the nuclear industry

  4. A novel technique for presurgical nasoalveolar molding using computer-aided reverse engineering and rapid prototyping.

    Science.gov (United States)

    Yu, Quan; Gong, Xin; Wang, Guo-Min; Yu, Zhe-Yuan; Qian, Yu-Fen; Shen, Gang

    2011-01-01

    To establish a new method of presurgical nasoalveolar molding (NAM) using computer-aided reverse engineering and rapid prototyping technique in infants with unilateral cleft lip and palate (UCLP). Five infants (2 males and 3 females with mean age of 1.2 w) with complete UCLP were recruited. All patients were subjected to NAM before the cleft lip repair. The upper denture casts were recorded using a three-dimensional laser scanner within 2 weeks after birth in UCLP infants. A digital model was constructed and analyzed to simulate the NAM procedure with reverse engineering software. The digital geometrical data were exported to print the solid model with rapid prototyping system. The whole set of appliances was fabricated based on these solid models. Laser scanning and digital model construction simplified the NAM procedure and estimated the treatment objective. The appliances were fabricated based on the rapid prototyping technique, and for each patient, the complete set of appliances could be obtained at one time. By the end of presurgical NAM treatment, the cleft was narrowed, and the malformation of nasoalveolar segments was aligned normally. We have developed a novel technique of presurgical NAM based on a computer-aided design. The accurate digital denture model of UCLP infants could be obtained with laser scanning. The treatment design and appliance fabrication could be simplified with a computer-aided reverse engineering and rapid prototyping technique.

  5. Nudge to nobesity II: Menu positions influence food orders

    Directory of Open Access Journals (Sweden)

    Eran Dayan

    2011-06-01

    Full Text Available ``Very small but cumulated decreases in food intake may be sufficient to have significant effects, even erasing obesity over a period of years'' (Rozin et al., 2011. In two studies, one a lab study and the other a real-world study, we examine the effect of manipulating the position of different foods on a restaurant menu. Items placed at the beginning or the end of the list of their category options were up to twice as popular as when they were placed in the center of the list. Given this effect, placing healthier menu items at the top or bottom of item lists and less healthy ones in their center (e.g., sugared drinks vs. calorie-free drinks should result in some increase in favor of healthier food choices.

  6. Designing an Incentive Contract Menu for Sustaining the Electricity Market

    Directory of Open Access Journals (Sweden)

    Ying Yu

    2015-12-01

    Full Text Available This paper designs an incentive contract menu to achieve long-term stability for electricity prices in a day-ahead electricity market. A bi-level Stackelberg game model is proposed to search for the optimal incentive mechanism under a one-leader and multi-followers gaming framework. A multi-agent simulation platform was developed to investigate the effectiveness of the incentive mechanism using an independent system operator (ISO and multiple power generating companies (GenCos. Further, a Q-learning approach was implemented to analyze and assess the response of GenCos to the incentive menu. Numerical examples are provided to demonstrate the effectiveness of the incentive contract.

  7. Using a visual plate waste study to monitor menu performance.

    Science.gov (United States)

    Connors, Priscilla L; Rozell, Sarah B

    2004-01-01

    Two visual plate waste studies were conducted in 1-week phases over a 1-year period in an acute care hospital. A total of 383 trays were evaluated in the first phase and 467 in the second. Food items were ranked for consumption from a low (1) to high (6) score, with a score of 4.0 set as the benchmark denoting a minimum level of acceptable consumption. In the first phase two entrees, four starches, all of the vegetables, sliced white bread, and skim milk scored below the benchmark. As a result six menu items were replaced and one was modified. In the second phase all entrees scored at or above 4.0, as did seven vegetables, and a dinner roll that replaced sliced white bread. Skim milk continued to score below the benchmark. A visual plate waste study assists in benchmarking performance, planning menu changes, and assessing effectiveness.

  8. Computer Algebra-based RBES personalized menu generator

    OpenAIRE

    Roanes-Lozano, Eugenio; Galán-García, José Luis; Aguilera-Venegas, Gabriel

    2015-01-01

    People have many constraints concerning the food they eat. These constraints can be based on religious believes, be due to food allergies or to illnesses, or can be derived just from personal preferences. Therefore, preparing menus at hospitals and restaurants can be really complex. Another special situation arise when travel- ing abroad. It is not always enough to know the brief description in the restaurant menu or the explanation of the waiter. For example, “calamares en su...

  9. IFF, Full-Screen Input Menu Generator for FORTRAN Program

    International Nuclear Information System (INIS)

    Seidl, Albert

    1991-01-01

    1 - Description of program or function: The IFF-package contains input modules for use within FORTRAN programs. This package enables the programmer to easily include interactive menu-directed data input (module VTMEN1) and command-word processing (module INPCOM) into a FORTRAN program. 2 - Method of solution: No mathematical operations are performed. 3 - Restrictions on the complexity of the problem: Certain restrictions of use may arise from the dimensioning of arrays. Field lengths are defined via PARAMETER-statements

  10. Warranty menu design for a two-dimensional warranty

    International Nuclear Information System (INIS)

    Ye, Zhi-Sheng; Murthy, D.N. Pra

    2016-01-01

    Fierce competitions in the commercial product market have forced manufacturers to provide customer-friendly warranties with a view to achieving higher customer satisfaction and increasing the market share. This study proposes a strategy that offers customers a two-dimensional warranty menu with a number of warranty choices, called a flexible warranty policy. We investigate the design of a flexible two-dimensional warranty policy that contains a number of rectangular regions. This warranty policy is obtained by dividing customers into several groups according to their use rates and providing each group a germane warranty region. Consumers choose a favorable one from the menu according to their usage behaviors. Evidently, this flexible warranty policy is attractive to users of different usage behaviors, and thus, it gives the manufacturer a good position in advertising the product. When consumers are unaware about their use rates upon purchase, we consider a fixed two-dimensional warranty policy with a stair-case warranty region and show that it is equivalent to the flexible policy. Such an equivalence reveals the inherent relationship between the rectangular warranty policy, the L-shape warranty policy, the step-stair warranty policy and the iso-probability of failure warranty policy that were extensively discussed in the literature. - Highlights: • We design a two-dimensional warranty menu with a number of warranty choices. • Consumers can choose a favorable one from the menu as per their usage behavior. • We further consider a fixed 2D warranty policy with a stair-case warranty region. • We show the equivalence of the two warranty policies.

  11. Optical Measurement Techniques for Rocket Engine Testing and Component Applications: Digital Image Correlation and Dynamic Photogrammetry

    Science.gov (United States)

    Gradl, Paul

    2016-01-01

    NASA Marshall Space Flight Center (MSFC) has been advancing dynamic optical measurement systems, primarily Digital Image Correlation, for extreme environment rocket engine test applications. The Digital Image Correlation (DIC) technology is used to track local and full field deformations, displacement vectors and local and global strain measurements. This technology has been evaluated at MSFC through lab testing to full scale hotfire engine testing of the J-2X Upper Stage engine at Stennis Space Center. It has been shown to provide reliable measurement data and has replaced many traditional measurement techniques for NASA applications. NASA and AMRDEC have recently signed agreements for NASA to train and transition the technology to applications for missile and helicopter testing. This presentation will provide an overview and progression of the technology, various testing applications at NASA MSFC, overview of Army-NASA test collaborations and application lessons learned about Digital Image Correlation.

  12. Practical Applications of Evolutionary Computation to Financial Engineering Robust Techniques for Forecasting, Trading and Hedging

    CERN Document Server

    Iba, Hitoshi

    2012-01-01

    “Practical Applications of Evolutionary Computation to Financial Engineering” presents the state of the art techniques in Financial Engineering using recent results in Machine Learning and Evolutionary Computation. This book bridges the gap between academics in computer science and traders and explains the basic ideas of the proposed systems and the financial problems in ways that can be understood by readers without previous knowledge on either of the fields. To cement the ideas discussed in the book, software packages are offered that implement the systems described within. The book is structured so that each chapter can be read independently from the others. Chapters 1 and 2 describe evolutionary computation. The third chapter is an introduction to financial engineering problems for readers who are unfamiliar with this area. The following chapters each deal, in turn, with a different problem in the financial engineering field describing each problem in detail and focusing on solutions based on evolutio...

  13. Restaurant menu labeling use among adults--17 states, 2012.

    Science.gov (United States)

    Lee-Kwan, Seung Hee; Pan, Liping; Maynard, Leah; Kumar, Gayathri; Park, Sohyun

    2014-07-11

    Many persons underestimate the calories in restaurant foods. Increased attention has been given to menu labeling (ML) as a way to provide consumers with point-of-purchase information that can help them reduce calorie intake and make healthier dietary choices. In 2010, a federal law was passed requiring restaurants with 20 or more establishments to display calorie information on menus and menu boards.* The regulations to implement this federal law have not been finalized, but some states and local jurisdictions have implemented their own ML policies, and many restaurants have already begun providing ML. To assess fast food and chain restaurant ML use by state and by demographic subgroup, CDC examined self-reported ML use by adults in 17 states that used the Sugar-Sweetened Beverages and Menu Labeling optional module in the 2012 Behavioral Risk Factor Surveillance System (BRFSS) survey. Based on approximately 97% of adult BRFSS respondents who noticed ML information at restaurants, the estimated overall proportion of ML users in the 17 states was 57.3% (range = 48.7% in Montana to 61.3% in New York). The prevalence of ML use was higher among women than men for all states; the patterns varied by age group and race/ethnicity across states. States and public health professionals can use these findings to track the use of ML and to develop targeted interventions to increase awareness and use of ML among nonusers.

  14. Trigger Menu-aware Monitoring for the ATLAS experiment

    CERN Document Server

    Hoad, Xanthe; The ATLAS collaboration

    2016-01-01

    Changes in the trigger menu, the online algorithmic event-selection of the ATLAS experiment at the LHC in response to luminosity and detector changes are followed by adjustments in their monitoring system. This is done to ensure that the collected data is useful, and can be properly reconstructed at Tier-0, the first level of the computing grid. During Run 1, ATLAS deployed monitoring updates with the installation of new software releases at Tier-0. This created unnecessary overhead for developers and operators, and unavoidably led to different releases for the data-taking and the monitoring setup. We present a "trigger menu-aware" monitoring system designed for the ATLAS Run 2 data-taking. The new monitoring system aims to simplify the ATLAS operational workflows, and allows for easy and flexible monitoring configuration changes at the Tier-0 site via an Oracle DB interface. We present the design and the implementation of the menu-aware monitoring, along with lessons from the operational experience of the ne...

  15. Software engineering techniques applied to agricultural systems an object-oriented and UML approach

    CERN Document Server

    Papajorgji, Petraq J

    2014-01-01

    Software Engineering Techniques Applied to Agricultural Systems presents cutting-edge software engineering techniques for designing and implementing better agricultural software systems based on the object-oriented paradigm and the Unified Modeling Language (UML). The focus is on the presentation of  rigorous step-by-step approaches for modeling flexible agricultural and environmental systems, starting with a conceptual diagram representing elements of the system and their relationships. Furthermore, diagrams such as sequential and collaboration diagrams are used to explain the dynamic and static aspects of the software system.    This second edition includes: a new chapter on Object Constraint Language (OCL), a new section dedicated to the Model-VIEW-Controller (MVC) design pattern, new chapters presenting details of two MDA-based tools – the Virtual Enterprise and Olivia Nova, and a new chapter with exercises on conceptual modeling.  It may be highly useful to undergraduate and graduate students as t...

  16. An SPSSR -Menu for Ordinal Factor Analysis

    Directory of Open Access Journals (Sweden)

    Mario Basto

    2012-01-01

    Full Text Available Exploratory factor analysis is a widely used statistical technique in the social sciences. It attempts to identify underlying factors that explain the pattern of correlations within a set of observed variables. A statistical software package is needed to perform the calculations. However, there are some limitations with popular statistical software packages, like SPSS. The R programming language is a free software package for statistical and graphical computing. It offers many packages written by contributors from all over the world and programming resources that allow it to overcome the dialog limitations of SPSS. This paper offers an SPSS dialog written in theR programming language with the help of some packages, so that researchers with little or no knowledge in programming, or those who are accustomed to making their calculations based on statistical dialogs, have more options when applying factor analysis to their data and hence can adopt a better approach when dealing with ordinal, Likert-type data.

  17. Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques

    Science.gov (United States)

    Delvecchio, S.; Bonfiglio, P.; Pompoli, F.

    2018-01-01

    This paper deals with the state-of-the-art strategies and techniques based on vibro-acoustic signals that can monitor and diagnose malfunctions in Internal Combustion Engines (ICEs) under both test bench and vehicle operating conditions. Over recent years, several authors have summarized what is known in critical reviews mainly focused on reciprocating machines in general or on specific signal processing techniques: no attempts to deal with IC engine condition monitoring have been made. This paper first gives a brief summary of the generation of sound and vibration in ICEs in order to place further discussion on fault vibro-acoustic diagnosis in context. An overview of the monitoring and diagnostic techniques described in literature using both vibration and acoustic signals is also provided. Different faulty conditions are described which affect combustion, mechanics and the aerodynamics of ICEs. The importance of measuring acoustic signals, as opposed to vibration signals, is due since the former seem to be more suitable for implementation on on-board monitoring systems in view of their non-intrusive behaviour, capability in simultaneously capturing signatures from several mechanical components and because of the possibility of detecting faults affecting airborne transmission paths. In view of the recent needs of the industry to (-) optimize component structural durability adopting long-life cycles, (-) verify the engine final status at the end of the assembly line and (-) reduce the maintenance costs monitoring the ICE life during vehicle operations, monitoring and diagnosing system requests are continuously growing up. The present review can be considered a useful guideline for test engineers in understanding which types of fault can be diagnosed by using vibro-acoustic signals in sufficient time in both test bench and operating conditions and which transducer and signal processing technique (of which the essential background theory is here reported) could be

  18. Digital Image Correlation Techniques Applied to Large Scale Rocket Engine Testing

    Science.gov (United States)

    Gradl, Paul R.

    2016-01-01

    Rocket engine hot-fire ground testing is necessary to understand component performance, reliability and engine system interactions during development. The J-2X upper stage engine completed a series of developmental hot-fire tests that derived performance of the engine and components, validated analytical models and provided the necessary data to identify where design changes, process improvements and technology development were needed. The J-2X development engines were heavily instrumented to provide the data necessary to support these activities which enabled the team to investigate any anomalies experienced during the test program. This paper describes the development of an optical digital image correlation technique to augment the data provided by traditional strain gauges which are prone to debonding at elevated temperatures and limited to localized measurements. The feasibility of this optical measurement system was demonstrated during full scale hot-fire testing of J-2X, during which a digital image correlation system, incorporating a pair of high speed cameras to measure three-dimensional, real-time displacements and strains was installed and operated under the extreme environments present on the test stand. The camera and facility setup, pre-test calibrations, data collection, hot-fire test data collection and post-test analysis and results are presented in this paper.

  19. Application of integrated logistic techniques to operation, maintenance and re engineering processes in Nuclear Power plants

    International Nuclear Information System (INIS)

    Santiago Diez, P.

    1997-01-01

    This paper addresses the advisability of adapting and applying management and Integrated Logistic engineering techniques to nuclear power plants instead of using more traditional maintenance management methods. It establishes a historical framework showing the origins of integrated approaches based on traditional logistic support concepts, their phases and the real results obtained in the aeronautic world where they originated. It reviews the application of integrated management philosophy, and logistic support and engineering analysis techniques regarding Availability, Reliability and Maintainability (ARM) and shows their inter dependencies in different phases of the system's life (Design, Development and Operation). It describes how these techniques are applied to nuclear power plant operation, their impact on plant availability and the optimisation of maintenance and replacement plans. The paper analyses the need for data (type and volume), which will have to be collected, and the different tools to manage such data. It examines the different CALS tools developed by EA for engineering and for logistic management. It also explains the possibility of using these tools for process and data operations through the INTERNET. It also focuses on the qualities of some simple examples of possible applications, and how they would be used in the framework of Integrated Logistic Support (ILS). (Author)

  20. Knee Ligament Injury and the Clinical Application of Tissue Engineering Techniques: A Systematic Review.

    Science.gov (United States)

    Riley, Thomas C; Mafi, Reza; Mafi, Pouya; Khan, Wasim S

    2018-02-23

    The incidence of knee ligament injury is increasing and represents a significant cost to healthcare providers. Current interventions include tissue grafts, suture repair and non-surgical management. These techniques have demonstrated good patient outcomes but have been associated graft rejection, infection, long term immobilization and reduced joint function. The limitations of traditional management strategies have prompted research into tissue engineering of knee ligaments. This paper aims to evaluate whether tissue engineering of knee ligaments offers a viable alternative in the clinical management of knee ligament injuries. A search of existing literature was performed using OVID Medline, Embase, AMED, PubMed and Google Scholar, and a manual review of citations identified within these papers. Silk, polymer and extracellular matrix based scaffolds can all improve graft healing and collagen production. Fibroblasts and stem cells demonstrate compatibility with scaffolds, and have been shown to increase organized collagen production. These effects can be augmented using growth factors and extracellular matrix derivatives. Animal studies have shown tissue engineered ligaments can provide the biomechanical characteristics required for effective treatment of knee ligament injuries. There is a growing clinical demand for a tissue engineered alternative to traditional management strategies. Currently, there is limited consensus regarding material selection for use in tissue engineered ligaments. Further research is required to optimize tissue engineered ligament production before clinical application. Controlled clinical trials comparing the use of tissue engineered ligaments and traditional management in patients with knee ligament injury could determine whether they can provide a cost-effective alternative. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  1. Application of the Health Belief Model to customers' use of menu labels in restaurants.

    Science.gov (United States)

    Jeong, Jin-Yi; Ham, Sunny

    2018-04-01

    Some countries require the provision of menu labels on restaurant menus to fight the increasing prevalence of obesity and related chronic diseases. This study views customers' use of menu labels as a preventive health behavior and applies the Health Belief Model (HBM) with the aim of determining the health belief factors that influence customers' use of menu labels. A self-administered survey was distributed for data collection. Responses were collected from 335 restaurant customers who experienced menu labels in restaurants within three months prior to the survey. The results of a structural equation model showed that all the HBM variables (perceived threats, perceived benefits, and perceived barriers of using menu labels) positively affected the customers' use of menu labels. Perceived threats were influenced by cues to action and cues to action had an indirect influence on menu label use through perceived threats. In conclusion, health beliefs were good predictors of menu label use on restaurant menus. This study validated the application of the HBM to menu labeling in restaurants, and its findings could offer guidelines for the industry and government in developing strategies to expand the use of menu labels among the public. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Development of a user interface and evaluation of an ontology for menu-based retrieval; Soho menu ni tekishita interface no kaihatsu to yogo bunrui no hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Y.; Shinohara, Y.

    2000-06-01

    We have proposed the 'complementary menu system' as an easy-to-build and easy-to-use menu system. It has two component menu systems, one is based on a word taxonomy and the other is based on the document structure (e.g., the table of contents of the target document). By the user's selection of an item on a menu, the positions and relevance of related items are shown on the other menu, which makes users easier to select proper menu items. We have also shown the combination of context-sensitive menus reduces user's errors of selection of menu items by several experiments. In this report, we investigate the choice of word taxonomies effective for novice users and the design of structure and interface of menus to reduce overlooked related items. 1. Comparative experiment among a complementary menu using a general-purpose word taxonomy used in a thesaurus and the ones using domain-specific taxonomies based on quick references used in the target document, shows that even novice users prefer domain-specific word taxonomies and exhibit higher performance in retrieval significantly. 2. Comparison between a domain-specific word taxonomy that arranges different categories in a line and another domain-specific word taxonomy which reorganizes the categories under one parent category, suggests users relatively prefer the latter taxonomy but the preference depends on the amount of user's domain specific knowledge. 3. Component menu system which has only one menu showing the whole taxonomic hierarchy with scrollbars on which the positions and relevance of related items are shown is effective to reduce the number of overlooked items. (author)

  3. A DIC Based Technique to Measure the Contraction of a Skeletal Muscle Engineered Tissue

    Directory of Open Access Journals (Sweden)

    Emanuele Rizzuto

    2016-01-01

    Full Text Available Tissue engineering is a multidisciplinary science based on the application of engineering approaches to biologic tissue formation. Engineered tissue internal organization represents a key aspect to increase biofunctionality before transplant and, as regarding skeletal muscles, the potential of generating contractile forces is dependent on the internal fiber organization and is reflected by some macroscopic parameters, such as the spontaneous contraction. Here we propose the application of digital image correlation (DIC as an independent tool for an accurate and noninvasive measurement of engineered muscle tissue spontaneous contraction. To validate the proposed technique we referred to the X-MET, a promising 3-dimensional model of skeletal muscle. The images acquired through a high speed camera were correlated with a custom-made algorithm and the longitudinal strain predictions were employed for measuring the spontaneous contraction. The spontaneous contraction reference values were obtained by studying the force response. The relative error between the spontaneous contraction frequencies computed in both ways was always lower than 0.15%. In conclusion, the use of a DIC based system allows for an accurate and noninvasive measurement of biological tissues’ spontaneous contraction, in addition to the measurement of tissue strain field on any desired region of interest during electrical stimulation.

  4. Pengaruh Keragaman Menu, Kualitas Produk, Citra Merek, dan Iklan terhadap Keputusan Pemebelian

    OpenAIRE

    Ali, Muhammad Wahyu; Waluyo, Handoyo Djoko; Listyorini, Sari

    2013-01-01

    In the restaurant business, which is the key to success is the diversity of menu and the quality of products offered. Consumers will compare the suitability of the sacrifices made by the quality of products and the diversity of the menu offered by the restaurant, other attributes inherent in a product such as brand image and advertising needs to be developed to influence customer purchase. This study aims to determine effect of the diversity of menu, product quality, brand image, and adverti...

  5. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    OpenAIRE

    Maya K. Vadiveloo; Vasanti S. Malik; Donna Spiegelman; Walter C. Willett; Josiemer Mattei

    2017-01-01

    Worksite cafeterias are compelling venues to improve diet quality through environmental changes.We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012–2015) were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes....

  6. Fabrication of Nanohydroxyapatite/Poly(caprolactone Composite Microfibers Using Electrospinning Technique for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Mohd Izzat Hassan

    2014-01-01

    Full Text Available Tissue engineering fibrous scaffolds serve as three-dimensional (3D environmental framework by mimicking the extracellular matrix (ECM for cells to grow. Biodegradable polycaprolactone (PCL microfibers were fabricated to mimic the ECM as a scaffold with 7.5% (w/v and 12.5% (w/v concentrations. Lower PCL concentration of 7.5% (w/v resulted in microfibers with bead defects. The average diameter of fibers increased at higher voltage and the distance of tip to collector. Further investigation was performed by the incorporation of nanosized hydroxyapatite (nHA into microfibers. The incorporation of 10% (w/w nHA with 7.5% (w/v PCL solution produced submicron sized beadless fibers. The microfibrous scaffolds were evaluated using various techniques. Biodegradable PCL and nHA/PCL could be promising for tissue engineering scaffold application.

  7. Computation techniques and computer programs to analyze Stirling cycle engines using characteristic dynamic energy equations

    Science.gov (United States)

    Larson, V. H.

    1982-01-01

    The basic equations that are used to describe the physical phenomena in a Stirling cycle engine are the general energy equations and equations for the conservation of mass and conversion of momentum. These equations, together with the equation of state, an analytical expression for the gas velocity, and an equation for mesh temperature are used in this computer study of Stirling cycle characteristics. The partial differential equations describing the physical phenomena that occurs in a Stirling cycle engine are of the hyperbolic type. The hyperbolic equations have real characteristic lines. By utilizing appropriate points along these curved lines the partial differential equations can be reduced to ordinary differential equations. These equations are solved numerically using a fourth-fifth order Runge-Kutta integration technique.

  8. Recent Progress of Fabrication of Cell Scaffold by Electrospinning Technique for Articular Cartilage Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Yingge Zhou

    2018-01-01

    Full Text Available As a versatile nanofiber manufacturing technique, electrospinning has been widely employed for the fabrication of tissue engineering scaffolds. Since the structure of natural extracellular matrices varies substantially in different tissues, there has been growing awareness of the fact that the hierarchical 3D structure of scaffolds may affect intercellular interactions, material transportation, fluid flow, environmental stimulation, and so forth. Physical blending of the synthetic and natural polymers to form composite materials better mimics the composition and mechanical properties of natural tissues. Scaffolds with element gradient, such as growth factor gradient, have demonstrated good potentials to promote heterogeneous cell growth and differentiation. Compared to 2D scaffolds with limited thicknesses, 3D scaffolds have superior cell differentiation and development rate. The objective of this review paper is to review and discuss the recent trends of electrospinning strategies for cartilage tissue engineering, particularly the biomimetic, gradient, and 3D scaffolds, along with future prospects of potential clinical applications.

  9. Engine Yaw Augmentation for Hybrid-Wing-Body Aircraft via Optimal Control Allocation Techniques

    Science.gov (United States)

    Taylor, Brian R.; Yoo, Seung Yeun

    2011-01-01

    Asymmetric engine thrust was implemented in a hybrid-wing-body non-linear simulation to reduce the amount of aerodynamic surface deflection required for yaw stability and control. Hybrid-wing-body aircraft are especially susceptible to yaw surface deflection due to their decreased bare airframe yaw stability resulting from the lack of a large vertical tail aft of the center of gravity. Reduced surface deflection, especially for trim during cruise flight, could reduce the fuel consumption of future aircraft. Designed as an add-on, optimal control allocation techniques were used to create a control law that tracks total thrust and yaw moment commands with an emphasis on not degrading the baseline system. Implementation of engine yaw augmentation is shown and feasibility is demonstrated in simulation with a potential drag reduction of 2 to 4 percent. Future flight tests are planned to demonstrate feasibility in a flight environment.

  10. A systematic review of applying modern software engineering techniques to developing robotic systems

    Directory of Open Access Journals (Sweden)

    Claudia Pons

    2012-01-01

    Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

  11. Emerging Techniques in Stratified Designs and Continuous Gradients for Tissue Engineering of Interfaces

    Science.gov (United States)

    Dormer, Nathan H.; Berkland, Cory J.; Detamore, Michael S.

    2013-01-01

    Interfacial tissue engineering is an emerging branch of regenerative medicine, where engineers are faced with developing methods for the repair of one or many functional tissue systems simultaneously. Early and recent solutions for complex tissue formation have utilized stratified designs, where scaffold formulations are segregated into two or more layers, with discrete changes in physical or chemical properties, mimicking a corresponding number of interfacing tissue types. This method has brought forth promising results, along with a myriad of regenerative techniques. The latest designs, however, are employing “continuous gradients” in properties, where there is no discrete segregation between scaffold layers. This review compares the methods and applications of recent stratified approaches to emerging continuously graded methods. PMID:20411333

  12. Applications of nuclear techniques in agronomy as a contribution to the integral formation of agronomical engineers

    International Nuclear Information System (INIS)

    Núñez Meireles, Mónica; Hernández Martínez, Asiel; Charbonet Martell, Miguel Enrique

    2016-01-01

    Nowadays, nuclear research applied to agriculture and food is a reality, and is being supported by institutions like the International Atomic Energy Agency and the United Nations Food and Agriculture Organization. Stable and radioactive isotopes are used in different ways in agricultural research mainly in the determination of required conditions to optimize efficiency in the use of fertilizers and water, the development of high yield agricultural and horticultural varieties, reduction of diseases due to contaminated food, and soil erosion studies among others. Accordingly to the study carried out, there is not much knowledge about nuclear phenomena applied to agronomy. Nevertheless there is a positive criterion about the introduction of these topics in Agronomical Engineers education, by mean of implementing an optional subject, aimed at explaining different spheres of action of nuclear techniques in Agriculture. Consequently, it would be possible achieving the linkage of agronomical engineers with the nuclear techniques, though respecting at the same time the professional model of this career. Moreover, it is also proposed to include laboratory practices in the curriculum of this career, using nuclear techniques and showing their proper linkage with Agronomy. (author)

  13. Effects of an icon-based menu labelling initiative on consumer food choice.

    Science.gov (United States)

    Kerins, Claire; Cunningham, Katie; Finucane, Francis M; Gibson, Irene; Jones, Jenni; Kelly, Colette

    2017-01-01

    The purpose of this study was to examine the impact of an icon-based menu labelling initiative on consumer buying behaviour. This quasi-experimental study recruited a convenience sample of eight food service establishments, all with at least one menu item meeting the heart healthy criteria. Data from sales of all menu items sold over an 8-week period were collated 4 weeks prior to and 4 weeks during the display of information icons related to healthy food choices on menus. The absolute change in menu item sales showed a non-significant trend towards an increase in healthier menu item selections. Furthermore, there was no association between the type of food service establishment and the percentage change in labelled menu item sales. The study did not find a statistically significant influence of the icon-based menu labels on consumer food choice. Given the limited amount of research that examines alternative menu labelling formats in real-world settings, more studies are necessary to confirm these results. Further research is needed to identify the optimal format, content and impact of menu labels on consumer behaviour.

  14. From Menu to Mouth: Opportunities for Sodium Reduction in Restaurants

    Science.gov (United States)

    Gunn, Janelle Peralez

    2014-01-01

    Restaurant foods can be a substantial source of sodium in the American diet. According to the Institute of Medicine, the significant contribution made by restaurants and food service menu items to Americans’ sodium intake warrants targeted attention. Public health practitioners are uniquely poised to support sodium-reduction efforts in restaurants and help drive demand for lower-sodium products through communication and collaboration with restaurant and food service professionals and through incentives for restaurants. This article discusses the role of the public health practitioner in restaurant sodium reduction and highlights select strategies that have been taken by state and local jurisdictions to support this effort. PMID:24456646

  15. Joint application of non-invasive techniques to characterize the dynamic behaviuor of engineering structures

    Science.gov (United States)

    Gallipoli, M. R.; Perrone, A.; Stabile, T. A.; Ponzo, F. C.; Ditommaso, R.

    2012-04-01

    The systematic monitoring of strategic civil infrastructures such as bridges, large dams or high-rise buildings in order to ensure their structural stability is a strategic issue particularly in earthquake-prone regions. Nevertheless, in areas less exposed to seismic hazard, the monitoring is also an important tool for civil engineers, for instance if they have to deal with structures exposed to heavy operational demands for extended periods of time and whose structural integrity might be in question or at risk. A continuous monitoring of such structures allows the identification of their fundamental response characteristics and the changes of these over time, the latter representing indicators for potential structural degradation. The aim of this paper is the estimation of fundamental dynamic parameters of some civil infrastructures by the joint application of fast executable, non-invasive techniques such as the Ambient Noise Standard Spectral Ratio, and Ground-Based microwave Radar Interferometer techniques. The joint approach combine conventional, non-conventional and innovative techniques in order to set up a non destructive evaluation procedure allowing for a multi-sensing monitoring at a multi-scale and multi-depth levels (i.e. with different degrees of spatial resolution and different subsurface depths). In particular, techniques based on ambient vibration recordings have become a popular tool for characterizing the seismic response and state-of-health of strategic civil infrastructure. The primary advantage of these approaches lies in the fact that no transient earthquake signals or even active excitation of the structure under investigation are required. The microwave interferometry radar technology, it has proven to be a powerful remote sensing tool for vibration measurement of structures, such as bridge, heritage architectural structures, vibrating stay cables, and engineering structures. The main advantage of this radar technique is the possibility to

  16. The Application of Biomedical Engineering Techniques to the Diagnosis and Management of Tropical Diseases: A Review

    Directory of Open Access Journals (Sweden)

    Fatimah Ibrahim

    2015-03-01

    Full Text Available This paper reviews a number of biomedical engineering approaches to help aid in the detection and treatment of tropical diseases such as dengue, malaria, cholera, schistosomiasis, lymphatic filariasis, ebola, leprosy, leishmaniasis, and American trypanosomiasis (Chagas. Many different forms of non-invasive approaches such as ultrasound, echocardiography and electrocardiography, bioelectrical impedance, optical detection, simplified and rapid serological tests such as lab-on-chip and micro-/nano-fluidic platforms and medical support systems such as artificial intelligence clinical support systems are discussed. The paper also reviewed the novel clinical diagnosis and management systems using artificial intelligence and bioelectrical impedance techniques for dengue clinical applications.

  17. Model-driven engineering of information systems principles, techniques, and practice

    CERN Document Server

    Cretu, Liviu Gabriel

    2015-01-01

    Model-driven engineering (MDE) is the automatic production of software from simplified models of structure and functionality. It mainly involves the automation of the routine and technologically complex programming tasks, thus allowing developers to focus on the true value-adding functionality that the system needs to deliver. This book serves an overview of some of the core topics in MDE. The volume is broken into two sections offering a selection of papers that helps the reader not only understand the MDE principles and techniques, but also learn from practical examples. Also covered are the

  18. The application of biomedical engineering techniques to the diagnosis and management of tropical diseases: a review.

    Science.gov (United States)

    Ibrahim, Fatimah; Thio, Tzer Hwai Gilbert; Faisal, Tarig; Neuman, Michael

    2015-03-23

    This paper reviews a number of biomedical engineering approaches to help aid in the detection and treatment of tropical diseases such as dengue, malaria, cholera, schistosomiasis, lymphatic filariasis, ebola, leprosy, leishmaniasis, and American trypanosomiasis (Chagas). Many different forms of non-invasive approaches such as ultrasound, echocardiography and electrocardiography, bioelectrical impedance, optical detection, simplified and rapid serological tests such as lab-on-chip and micro-/nano-fluidic platforms and medical support systems such as artificial intelligence clinical support systems are discussed. The paper also reviewed the novel clinical diagnosis and management systems using artificial intelligence and bioelectrical impedance techniques for dengue clinical applications.

  19. Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions

    Science.gov (United States)

    2017-03-06

    WP-201317) Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-volatile Particulate Matter (PM... Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions 6. AUTHOR(S) E. Corporan, M. DeWitt, C. Klingshirn, M.D. Cheng, R. Miake-Lye, J. Peck...the performance and viability of two devices to condition aircraft turbine engine exhaust to allow the accurate measurement of total (volatile and non

  20. Development of an eddy current inspection technique for sleeved engine disk bolt holes

    International Nuclear Information System (INIS)

    Palanisamy, R.; Lakin, K.M.

    1983-01-01

    Recent research programs have concentrated mainly on developing techniques to characterize surface breaking cracks and very little has been done towards characterizing subsurface flaws in conducting materials. Presented in this paper are the results of some initial theoretical work aimed at the development of a reliable eddy current technique to detect and characterize defects in engine disk bolt holes under a 0.05'' stainless steel sleeve. The change in impedance of an absolute eddy current coil with and without ferrite core, and the distribution of eddy currents around a second layer crack with and without a thin insulating film between the two conducting layers have been predicted numerically. The overall system development goals and methods to accomplish them are outlined briefly

  1. Mandating nutrient menu labeling in restaurants: potential public health benefits.

    Science.gov (United States)

    Stran, Kimberly A; Turner, Lori W; Knol, Linda

    2013-03-01

    Many Americans have replaced home-cooked meals with fast food and restaurants meals. This contributes to increased incidences of overweight and obesity. Implementing policies that require restaurants to disclose nutrition information has the potential to improve nutrition knowledge and food behaviors. The purpose of this paper was to examine the potential health benefits of nutrient menu labeling in restaurants, the progress of this legislation and to provide results regarding the implementation of these policies. Data sources were obtained from a search of multiple databases including PubMed, Science Direct, Academic Search Premier, and Google Scholar. Study inclusion criteria were publication in the past ten years, obesity prevention, and utilization of nutrition labeling on menus in restaurants. The initial policies to provide consumers with nutrition information in restaurant settings began at the state levels in 2006. These laws demonstrated success, other states followed, and a national law was passed and is being implemented. Mandating nutrient menu disclosure has the potential to influence a large number of people; this legislation has the opportunity to impact Americans who dine at a fast food or chain restaurant. Given the growing obesity epidemic, continued research is necessary to gauge the effectiveness of this new law and its effects on the health status of the American people.

  2. Fabrication and Characterization of three dimensional Scaffolds for tissue engineering application via microstereolithography technique

    International Nuclear Information System (INIS)

    Marina Talib; Covington, J.A.; Dove, A.; Bolarinwa, A.; Grover, L.

    2012-01-01

    Microstereolithography is a method used for rapid proto typing of polymeric and ceramic components. This technique converts a computer-aided design (CAD) to a three dimensional (3D) model, and enables layer-per-layer fabrication curing a liquid resin with UV-light or laser source. However, the use of stereo lithography in tissue engineering has not been significantly explored possibly due to the lack of commercially available implantable or biocompatible materials from the SL industry. This study seeks to develop a range of new bio-compatible/degradable materials that are compatible with a commercial 3D direct manufacture system (envisionTEC Desktop). Firstly, a selection of multifunctional polymer and calcium phosphate were studied in order to formulate biodegradable photo polymer resin for specific tissue engineering applications. A 3D structure was successfully fabricated from the formulated photo curable resins. The photo polymer of ceramic suspension was prepared with the addition of 50-70 wt % of calcium pyrophosphate (CPP) and hydroxyapatite (HA). They were then sintered at high temperature for polymer removal, to obtain a ceramic of the desired porosity. Mechanical properties, morphology and calcium phosphate content of the sintered polymers were characterised and investigated with SEM and XRD, respectively. The addition of calcium phosphate coupled with high temperature sintering, had a significant effect on the mechanical properties exhibited by the bio ceramic. The successful fabrication of novel bio ceramic polymer composite with MSL technique offers the possibility of designing complex tissue scaffolds with optimum mechanical properties for specific tissue engineering applications. (author)

  3. Trends in Sodium Content of Menu Items in Large Chain Restaurants in the U.S.

    Science.gov (United States)

    Wolfson, Julia A; Moran, Alyssa J; Jarlenski, Marian P; Bleich, Sara N

    2018-01-01

    Consuming too much sodium is associated with increased risk for cardiovascular disease, and restaurant foods are a primary source of sodium. This study assessed recent trends in sodium content of menu items in U.S. chain restaurants. Data from 21,557 menu items in 66 top-earning chain restaurants available from 2012 to 2016 were obtained from the MenuStat project and analyzed in 2017. Generalized linear models were used to examine changes in calorie-adjusted, per-item sodium content of menu items offered in all years (2012-2016) and items offered in 2012 only compared with items newly introduced in 2013, 2014, 2015, and 2016. Overall, calorie-adjusted sodium content in newly introduced menu items declined by 104 mg from 2012 to 2016 (prestaurant type; sodium content, particularly for main course items, was high. Sodium declined by 83 mg in fast food restaurants, 19 mg in fast casual restaurants, and 163 mg in full service restaurants. Sodium in appetizer and side items newly introduced in 2016 increased by 266 mg compared with items on the menu in 2012 only (prestaurants. However, sodium content of core and new menu items remain high, and reductions are inconsistent across menu categories and restaurant types. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  4. The effects of restaurant menu calorie labeling on hypothetical meal choices of females with disordered eating.

    Science.gov (United States)

    Haynos, Ann F; Roberto, Christina A

    2017-03-01

    Concerns have been raised that obesity public policy measures may have harmful effects on individuals with eating disorders. However, little research has investigated this topic. We examined the impact of a popular obesity public policy, menu calorie labeling, on hypothetical food choices of women with disordered eating. Seven hundred sixteen adult females completed an online survey in which they were randomly assigned to receive a restaurant menu with or without calorie information listed. Participants selected foods representative of a meal they would choose to consume and answered questions on restaurant ordering and menu labeling. Participants completed the Eating Disorder Examination Questionnaire (Fairburn & Beglin, ) to assess global eating pathology. Diagnoses of anorexia nervosa (AN), bulimia nervosa (BN), and binge-eating disorder (BED) were also derived from this measure. Generalized linear modeling examined the impact of menu label condition, disordered eating, and the menu label by disordered eating interaction on hypothetical food selection and related variables. When disordered eating was examined continuously, menu labeling did not differentially affect food selections of those with elevated disordered eating (p = .45). However, when examined by eating disorder diagnosis, participants with AN or BN ordered significantly fewer (p < .001) and participants with BED ordered significantly more (p = .001) calories in the menu label versus no label condition. Menu labeling may decrease the calories ordered among individuals with AN or BN and increase calories ordered among individuals with BED. © 2017 Wiley Periodicals, Inc.

  5. 75 FR 67978 - Agency Information Collection Activities; Proposed Collection; Comment Request; Restaurant Menu...

    Science.gov (United States)

    2010-11-04

    ...] Agency Information Collection Activities; Proposed Collection; Comment Request; Restaurant Menu Labeling... appropriate, and other forms of information technology. Restaurant Menu Labeling: Registration for Small... restaurants and similar retail food establishments (SRFE) with 20 or more locations, as well as operators of...

  6. Captivate MenuBuilder: Creating an Online Tutorial for Teaching Software

    Science.gov (United States)

    Yelinek, Kathryn; Tarnowski, Lynn; Hannon, Patricia; Oliver, Susan

    2008-01-01

    In this article, the authors, students in an instructional technology graduate course, describe a process to create an online tutorial for teaching software. They created the tutorial for a cyber school's use. Five tutorial modules were linked together through one menu screen using the MenuBuilder feature in the Adobe Captivate program. The…

  7. I saw the sign: the new federal menu-labeling law and lessons from local experience.

    Science.gov (United States)

    Banker, Michelle I

    2010-01-01

    Following the lead of several state and local governments, Congress recently imposed menu-labeling requirements on chain restaurants as part of the federal health care reform bill signed into law in March 2010. Section 4205 of the Patient Protection and Affordable Care Act requires restaurant chains with 20 or more locations nationwide to display calorie information for standard menu items on menus, menu boards, and drive-thru displays. This paper examines the new federal law in light of existing state and local regulations and considers the arguments for and against mandatory calorie labeling at restaurants as a federal tool for preventing obesity. Specifically, this paper examines the provisions of the new federal law, highlights how it differs from the municipal and state menu-labeling laws already in effect, reviews early studies of the effectiveness of these state and local laws, and considers the propriety of requiring restaurants to disclose calorie information on menus by discussing arguments for and against menu labeling generally and calorie labeling in particular. This paper finds that based on initial studies of state and local menu-labeling regulations, the efficacy of compulsory menu labeling as a tool to combat obesity remains uncertain. Finally, this paper raises practical considerations associated with the new federal law, including implementation issues, potential collateral effects of the law, a survey of legal challenges that may arise, and a discussion of the Food and Drug Administration's competence to enforce a menu-labeling requirement against restaurants.

  8. Using Cascading Style Sheets to Design a Fly-Out Menu with Microsoft Visual Studio

    Science.gov (United States)

    Liu, Chang; Downing, Charles

    2010-01-01

    The menu has become an integrated component within nearly all professionally designed websites. This teaching tip presents a no-code way to design either a vertical or a horizontal fly-out menu by using Cascading Style Sheets (CSS) within Microsoft Visual Studio 2008. The approach described in this tip helps students fully understand how to…

  9. 7 CFR 220.8 - Nutrition standards and menu planning approaches for breakfasts.

    Science.gov (United States)

    2010-01-01

    ...: (A) Grains/breads; and/or (B) Meat/meat alternate. (2) Quantities for the traditional food-based menu... potatoes to meet the grain/bread requirement. (h) What are the requirements for alternate menu planning... versus serve; (C) How such procedures will reduce plate waste; and (D) How a reasonable level of calories...

  10. On-screen-display (OSD) menu detection for proper stereo content reproduction for 3D TV

    Science.gov (United States)

    Tolstaya, Ekaterina V.; Bucha, Victor V.; Rychagov, Michael N.

    2011-03-01

    Modern consumer 3D TV sets are able to show video content in two different modes: 2D and 3D. In 3D mode, stereo pair comes from external device such as Blue-ray player, satellite receivers etc. The stereo pair is split into left and right images that are shown one after another. The viewer sees different image for left and right eyes using shutter-glasses properly synchronized with a 3DTV. Besides, some devices that provide TV with a stereo content are able to display some additional information by imposing an overlay picture on video content, an On-Screen-Display (OSD) menu. Some OSDs are not always 3D compatible and lead to incorrect 3D reproduction. In this case, TV set must recognize the type of OSD, whether it is 3D compatible, and visualize it correctly by either switching off stereo mode, or continue demonstration of stereo content. We propose a new stable method for detection of 3D incompatible OSD menus on stereo content. Conventional OSD is a rectangular area with letters and pictograms. OSD menu can be of different transparency levels and colors. To be 3D compatible, an OSD is overlaid separately on both images of a stereo pair. The main problem in detecting OSD is to distinguish whether the color difference is due to OSD presence, or due to stereo parallax. We applied special techniques to find reliable image difference and additionally used a cue that usually OSD has very implicit geometrical features: straight parallel lines. The developed algorithm was tested on our video sequences database, with several types of OSD with different colors and transparency levels overlaid upon video content. Detection quality exceeded 99% of true answers.

  11. The ATLAS Trigger Menu Design for Higher Luminosities in Run-2

    CERN Document Server

    Wiglesworth, Craig; The ATLAS collaboration

    2018-01-01

    In this presentation we describe the design criteria for the trigger menu for Run-2. We discuss several aspects of the process of planning the trigger menu, starting from how ATLAS physics goals and the need for detector performance measurements enter the menu design, and how rate, bandwidth, and CPU constraints are folded in during the compilation of the menu. We present the tools that allow us to predict and optimize the trigger rates and CPU consumption for the anticipated LHC luminosities. We outline the online system that we implemented to monitor deviations from the individual trigger target rates and to quickly react to changing LHC conditions and data taking scenarios. Finally we give an overview of the updated 2E34 Trigger Menu, allowing the listener to get a taste of the vast physics program that the trigger is supporting.

  12. Advanced Laser-Based Techniques for Gas-Phase Diagnostics in Combustion and Aerospace Engineering.

    Science.gov (United States)

    Ehn, Andreas; Zhu, Jiajian; Li, Xuesong; Kiefer, Johannes

    2017-03-01

    Gaining information of species, temperature, and velocity distributions in turbulent combustion and high-speed reactive flows is challenging, particularly for conducting measurements without influencing the experimental object itself. The use of optical and spectroscopic techniques, and in particular laser-based diagnostics, has shown outstanding abilities for performing non-intrusive in situ diagnostics. The development of instrumentation, such as robust lasers with high pulse energy, ultra-short pulse duration, and high repetition rate along with digitized cameras exhibiting high sensitivity, large dynamic range, and frame rates on the order of MHz, has opened up for temporally and spatially resolved volumetric measurements of extreme dynamics and complexities. The aim of this article is to present selected important laser-based techniques for gas-phase diagnostics focusing on their applications in combustion and aerospace engineering. Applicable laser-based techniques for investigations of turbulent flows and combustion such as planar laser-induced fluorescence, Raman and Rayleigh scattering, coherent anti-Stokes Raman scattering, laser-induced grating scattering, particle image velocimetry, laser Doppler anemometry, and tomographic imaging are reviewed and described with some background physics. In addition, demands on instrumentation are further discussed to give insight in the possibilities that are offered by laser flow diagnostics.

  13. Sociodemographic disparities among fast-food restaurant customers who notice and use calorie menu labels.

    Science.gov (United States)

    Green, Jessie E; Brown, Alan G; Ohri-Vachaspati, Punam

    2015-07-01

    As part of the recently passed Patient Protection and Affordable Care Act, chain restaurants with 20 or more locations nationwide will soon be required to post calorie information on menus with the aim of helping customers make healthier food choices. To be effective, this policy must affect all customers, especially those most at risk for poor health and diet outcomes. To determine whether noticing or using calorie menu labels was associated with demographic characteristics of customers at a national fast-food chain currently implementing calorie menu labeling. Cross-sectional analysis. Customer receipts and survey data were collected from 329 participants using street-intercept survey methodology at 29 McDonald's restaurant locations in low- and high-income neighborhoods throughout the Phoenix, AZ, metropolitan area. Calorie menu labeling awareness and use were assessed. The total number of calories purchased was evaluated using participants' itemized receipts. Multivariate logistic regression analyses were used to calculate the odds of customers noticing or using calorie menu labels. Approximately 60% of participants noticed calorie menu labels, whereas only 16% reported using the information for food or beverage purchases. Higher-income individuals had twice the odds of noticing calorie labels (P=0.029) and three times the odds of using them (P=0.004). Significant positive associations were found between individuals with a bachelor's degree or higher and use of calorie menu labels (odds ratio 3.25; P=0.023). Noticing calorie menu labels was not associated with purchasing fewer calories; however, those who reported using calorie information purchased 146 fewer calories than those who did not (P=0.001). Using calorie menu labels is associated with purchasing fewer calories. However, there are significant socioeconomic disparities among customers who notice and use calorie menu labels. Targeted education campaigns are needed to improve the use of menu labeling

  14. Planetary-Scale Geospatial Data Analysis Techniques in Google's Earth Engine Platform (Invited)

    Science.gov (United States)

    Hancher, M.

    2013-12-01

    Geoscientists have more and more access to new tools for large-scale computing. With any tool, some tasks are easy and other tasks hard. It is natural to look to new computing platforms to increase the scale and efficiency of existing techniques, but there is a more exiting opportunity to discover and develop a new vocabulary of fundamental analysis idioms that are made easy and effective by these new tools. Google's Earth Engine platform is a cloud computing environment for earth data analysis that combines a public data catalog with a large-scale computational facility optimized for parallel processing of geospatial data. The data catalog includes a nearly complete archive of scenes from Landsat 4, 5, 7, and 8 that have been processed by the USGS, as well as a wide variety of other remotely-sensed and ancillary data products. Earth Engine supports a just-in-time computation model that enables real-time preview during algorithm development and debugging as well as during experimental data analysis and open-ended data exploration. Data processing operations are performed in parallel across many computers in Google's datacenters. The platform automatically handles many traditionally-onerous data management tasks, such as data format conversion, reprojection, resampling, and associating image metadata with pixel data. Early applications of Earth Engine have included the development of Google's global cloud-free fifteen-meter base map and global multi-decadal time-lapse animations, as well as numerous large and small experimental analyses by scientists from a range of academic, government, and non-governmental institutions, working in a wide variety of application areas including forestry, agriculture, urban mapping, and species habitat modeling. Patterns in the successes and failures of these early efforts have begun to emerge, sketching the outlines of a new set of simple and effective approaches to geospatial data analysis.

  15. OASIS: a COBOL-11 menu-driven information system

    International Nuclear Information System (INIS)

    Lee, W.F. Jr.

    1982-01-01

    Oak Ridge National Laboratory's Automated Safeguards Information System (OASIS) is a near real-time nuclear materials/precious metals safeguard and accountability control system. Using COBOL and RSTS/E on a dedicated 11/34, the system performs on-line inventory update, inquiry and report functions. Processed transactions consisting of intra-laboratory movements, on-site receipts and off-site shipments are maintained for inquiry and report preparation. A secure, controlled but friendly user environment is maintained by chaining between menu and data manipulation tasks. The use of menus, security and access control, screen manipulation, file access and contention, word processing activities, task size problems and other aspects of this application will be discussed

  16. Finite element methods for engineering sciences. Theoretical approach and problem solving techniques

    Energy Technology Data Exchange (ETDEWEB)

    Chaskalovic, J. [Ariel University Center of Samaria (Israel); Pierre and Marie Curie (Paris VI) Univ., 75 (France). Inst. Jean le Rond d' Alembert

    2008-07-01

    This self-tutorial offers a concise yet thorough grounding in the mathematics necessary for successfully applying FEMs to practical problems in science and engineering. The unique approach first summarizes and outlines the finite-element mathematics in general and then, in the second and major part, formulates problem examples that clearly demonstrate the techniques of functional analysis via numerous and diverse exercises. The solutions of the problems are given directly afterwards. Using this approach, the author motivates and encourages the reader to actively acquire the knowledge of finite- element methods instead of passively absorbing the material, as in most standard textbooks. The enlarged English-language edition, based on the original French, also contains a chapter on the approximation steps derived from the description of nature with differential equations and then applied to the specific model to be used. Furthermore, an introduction to tensor calculus using distribution theory offers further insight for readers with different mathematical backgrounds. (orig.)

  17. Low-cost engineering techniques in sustainable operation of a rural clean water plant in thailand

    International Nuclear Information System (INIS)

    Pengchai, P.; Keawkhun, K.; Suwapaet, N.

    2012-01-01

    Problems of water supply in many rural regions of Thailand result from the lack of awareness and financial limitations. Payanghang Clean Water Plant is an example of the rural water plant that has been suffering from the poor operation since 2003. The objective of this study was to modify the operation processes of this water plant to achieve cleaner water and better financial condition. Low-cost engineering techniques, such as the use of floating switches in filtration ponds, the use of water drip system for alum dosing and the addition of Tamarindus indica Linn seed solution was applied. As a result, 76% of turbidity removal efficiency was derived. Although, the difference was not statistically significant at 95% confidence level, higher removal efficiency in comparison with the one before modification (65%) suggested better operation. In the view of financial aspect, l07 dollars (1 baht = 0.0326 U.S. dollar) benefit was obtained from 7 month-operation period. (author)

  18. Maternal Feeding Goals and Restaurant Menu Choices for Young Children.

    Science.gov (United States)

    Domoff, Sarah E; Kiefner-Burmeister, Allison; Hoffmann, Debra A; Musher-Eizenman, Dara

    2015-08-01

    Childhood obesity remains a major public health issue. One recent effort to improve the obesogenic environment is mandating that restaurants provide calorie and other nutritional content on menus. Little is known about whether maternal feeding for young children is influenced by calorie disclosure on menus. This study examined (1) whether maternal feeding goals associate with mothers' food selections for their young children and (2) whether mothers change entrée and side selections for their children when calories/fat grams are listed on menus. One-hundred seventy mothers of children ages of 3-6 years participated in an online survey. Most participants identified as white (76.5%), with a mean BMI of 25.68 (standard deviation=5.94). Mothers were presented two menus (one with and one without calorie/fat information). The goal of feeding for the child's familiarity with the food was significantly associated with mothers' selection of original side dish and entrées, with greater endorsement of this goal associated with choosing high-calorie/-fat sides and entrées. Feeding for natural content was associated with mothers' selection of original entrée, with greater endorsement of this goal associated with choosing low-calorie/-fat entrées. Significantly fewer mothers chose a higher-calorie entrée when there was menu labeling. Maternal feeding goals are associated with mothers' selection of entrée and side dishes on restaurant menus. Results from this study suggest that menu labeling of calories and fat grams may influence entrée choices by mothers. Targeting mothers' feeding goals and labeling restaurant menus may improve the diets of young children.

  19. Menu labeling regulations and calories purchased at chain restaurants.

    Science.gov (United States)

    Krieger, James W; Chan, Nadine L; Saelens, Brian E; Ta, Myduc L; Solet, David; Fleming, David W

    2013-06-01

    The federal menu labeling law will require chain restaurants to post caloric information on menus, but the impact of labeling is uncertain. The goal of the current study was to examine the effect of menu labeling on calories purchased, and secondarily, to assess self-reported awareness and use of labels. Single-community pre-post-post cross-sectional study. Data were collected in 2008-2010 and analyzed in 2011-2012. 50 sites from 10 chain restaurants in King County, Washington, selected through stratified, two-stage cluster random sampling. A total of 7325 customers participated. Eligibility criteria were: being an English speaker, aged ≥ 14 years, and having an itemized receipt. The study population was 59% male, 76% white non-Hispanic, and 53% agedmenu boards was implemented. Mean number of calories purchased. No significant changes occurred between baseline and 4-6 months postregulation. Mean calories per purchase decreased from 908.5 to 870.4 at 18 months post-implementation (38 kcal, 95% CI=-76.9, 0.8, p=0.06) in food chains and from 154.3 to 132.1 (22 kcal, 95% CI=-35.8, -8.5, p=0.002) in coffee chains. Calories decreased in taco and coffee chains, but not in burger and sandwich establishments. They decreased more among women than men in coffee chains. Awareness of labels increased from 18.8% to 61.7% in food chains and from 4.4% to 30.0% in coffee chains (both pmenu labeling in some restaurant chains and among women but not men. Copyright © 2013. Published by Elsevier Inc.

  20. Cost Engineering Techniques and Their Applicability for Cost Estimation of Organic Rankine Cycle Systems

    Directory of Open Access Journals (Sweden)

    Sanne Lemmens

    2016-06-01

    Full Text Available The potential of organic Rankine cycle (ORC systems is acknowledged by both considerable research and development efforts and an increasing number of applications. Most research aims at improving ORC systems through technical performance optimization of various cycle architectures and working fluids. The assessment and optimization of technical feasibility is at the core of ORC development. Nonetheless, economic feasibility is often decisive when it comes down to considering practical instalments, and therefore an increasing number of publications include an estimate of the costs of the designed ORC system. Various methods are used to estimate ORC costs but the resulting values are rarely discussed with respect to accuracy and validity. The aim of this paper is to provide insight into the methods used to estimate these costs and open the discussion about the interpretation of these results. A review of cost engineering practices shows there has been a long tradition of industrial cost estimation. Several techniques have been developed, but the expected accuracy range of the best techniques used in research varies between 10% and 30%. The quality of the estimates could be improved by establishing up-to-date correlations for the ORC industry in particular. Secondly, the rapidly growing ORC cost literature is briefly reviewed. A graph summarizing the estimated ORC investment costs displays a pattern of decreasing costs for increasing power output. Knowledge on the actual costs of real ORC modules and projects remains scarce. Finally, the investment costs of a known heat recovery ORC system are discussed and the methodologies and accuracies of several approaches are demonstrated using this case as benchmark. The best results are obtained with factorial estimation techniques such as the module costing technique, but the accuracies may diverge by up to +30%. Development of correlations and multiplication factors for ORC technology in particular is

  1. Application of powder metallurgy techniques to produce improved bearing elements for liquid rocket engines

    Science.gov (United States)

    Moracz, D. J.; Shipley, R. J.; Moxson, V. S.; Killman, R. J.; Munson, H. E.

    1992-01-01

    The objective was to apply powder metallurgy techniques for the production of improved bearing elements, specifically balls and races, for advanced cryogenic turbopump bearings. The materials and fabrication techniques evaluated were judged on the basis of their ability to improve fatigue life, wear resistance, and corrosion resistance of Space Shuttle Main Engine (SSME) propellant bearings over the currently used 440C. An extensive list of candidate bearing alloys in five different categories was considered: tool/die steels, through hardened stainless steels, cobalt-base alloys, and gear steels. Testing of alloys for final consideration included hardness, rolling contact fatigue, cross cylinder wear, elevated temperature wear, room and cryogenic fracture toughness, stress corrosion cracking, and five-ball (rolling-sliding element) testing. Results of the program indicated two alloys that showed promise for improved bearing elements. These alloys were MRC-2001 and X-405. 57mm bearings were fabricated from the MRC-2001 alloy for further actual hardware rig testing by NASA-MSFC.

  2. Relationships among grocery nutrition label users and consumers' attitudes and behavior toward restaurant menu labeling.

    Science.gov (United States)

    Roseman, Mary G; Mathe-Soulek, Kimberly; Higgins, Joseph A

    2013-12-01

    In the United States (US), based on the 2010 Affordable Care Act, restaurant chains and similar retail food establishments with 20 or more locations are required to begin implementing calorie information on their menus. As enacting of the law begins, it is important to understand its potential for improving consumers' healthful behaviors. Therefore, the objective of this study was to explore relationships among users of grocery nutrition labels and attitudes toward restaurant menu labeling, along with the caloric content of their restaurant menu selection. Study participants were surveyed and then provided identical mock restaurant menus with or without calories. Results found that participants who used grocery nutrition labels and believed they would make healthy menu selections with nutrition labels on restaurant menus made healthier menu selections, regardless of whether the menu displayed calories or not. Consumers' nutrition knowledge and behaviors gained from using grocery nutrition labels and consumers' desire for restaurants to provide nutrition menu labels have a positive effect on their choosing healthful restaurant menu items. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Techniques to assess acoustic-structure interaction in liquid rocket engines

    Science.gov (United States)

    Davis, R. Benjamin

    Acoustoelasticity is the study of the dynamic interaction between elastic structures and acoustic enclosures. In this dissertation, acoustoelasticity is considered in the context of liquid rocket engine design. The techniques presented here can be used to determine which forcing frequencies are important in acoustoelastic systems. With a knowledge of these frequencies, an analyst can either find ways to attenuate the excitation at these frequencies or alter the system in such a way that the prescribed excitations do result in a resonant condition. The end result is a structural component that is less susceptible to failure. The research scope is divided into three parts. In the first part, the dynamics of cylindrical shells submerged in liquid hydrogen (LH2) and liquid oxygen (LOX) are considered. The shells are bounded by rigid outer cylinders. This configuration gives rise to two fluid-filled cavities---an inner cylindrical cavity and an outer annular cavity. Such geometries are common in rocket engine design. The natural frequencies and modes of the fluid-structure system are computed by combining the rigid wall acoustic cavity modes and the in vacuo structural modes into a system of coupled ordinary differential equations. Eigenvalue veering is observed near the intersections of the curves representing natural frequencies of the rigid wall acoustic and the in vacuo structural modes. In the case of a shell submerged in LH2, system frequencies near these intersections are as much as 30% lower than the corresponding in vacuo structural frequencies. Due to its high density, the frequency reductions in the presence of LOX are even more dramatic. The forced responses of a shell submerged in LH2 and LOX while subject to a harmonic point excitation are also presented. The responses in the presence of fluid are found to be quite distinct from those of the structure in vacuo. In the second part, coupled mode theory is used to explore the fundamental features of

  4. A Note on the impact on sales from introducing healthy labeled meals on the lunch menu

    DEFF Research Database (Denmark)

    Thunström, Linda; Nordström, Leif Jonas

    Menu labeling of prepared meals away from home is a policy designed to help consumers make healthier food choices. In this paper, we use a field experiment to analyze if a restaurant benefits from introducing a healthy labeled meal on its menu by experiencing an overall increase in sales. We cann...... reject the hypothesis that sales are the same before and after the introduction of a healthy labeled meal on the menu, i.e., our data does not support the idea that restaurants increase their sales from supplying a healthy labeled meal....

  5. A novel porous scaffold fabrication technique for epithelial and endothelial tissue engineering.

    Science.gov (United States)

    McHugh, Kevin J; Tao, Sarah L; Saint-Geniez, Magali

    2013-07-01

    Porous scaffolds have the ability to minimize transport barriers for both two- (2D) and three-dimensional tissue engineering. However, current porous scaffolds may be non-ideal for 2D tissues such as epithelium due to inherent fabrication-based characteristics. While 2D tissues require porosity to support molecular transport, pores must be small enough to prevent cell migration into the scaffold in order to avoid non-epithelial tissue architecture and compromised function. Though electrospun meshes are the most popular porous scaffolds used today, their heterogeneous pore size and intense topography may be poorly-suited for epithelium. Porous scaffolds produced using other methods have similar unavoidable limitations, frequently involving insufficient pore resolution and control, which make them incompatible with 2D tissues. In addition, many of these techniques require an entirely new round of process development in order to change material or pore size. Herein we describe "pore casting," a fabrication method that produces flat scaffolds with deterministic pore shape, size, and location that can be easily altered to accommodate new materials or pore dimensions. As proof-of-concept, pore-cast poly(ε-caprolactone) (PCL) scaffolds were fabricated and compared to electrospun PCL in vitro using canine kidney epithelium, human colon epithelium, and human umbilical vein endothelium. All cell types demonstrated improved morphology and function on pore-cast scaffolds, likely due to reduced topography and universally small pore size. These results suggest that pore casting is an attractive option for creating 2D tissue engineering scaffolds, especially when the application may benefit from well-controlled pore size or architecture.

  6. A new construction technique for tissue-engineered heart valves using the self-assembly method.

    Science.gov (United States)

    Tremblay, Catherine; Ruel, Jean; Bourget, Jean-Michel; Laterreur, Véronique; Vallières, Karine; Tondreau, Maxime Y; Lacroix, Dan; Germain, Lucie; Auger, François A

    2014-11-01

    Tissue engineering appears as a promising option to create new heart valve substitutes able to overcome the serious drawbacks encountered with mechanical substitutes or tissue valves. The objective of this article is to present the construction method of a new entirely biological stentless aortic valve using the self-assembly method and also a first assessment of its behavior in a bioreactor when exposed to a pulsatile flow. A thick tissue was created by stacking several fibroblast sheets produced with the self-assembly technique. Different sets of custom-made templates were designed to confer to the thick tissue a three-dimensional (3D) shape similar to that of a native aortic valve. The construction of the valve was divided in two sequential steps. The first step was the installation of the thick tissue in a flat preshaping template followed by a 4-week maturation period. The second step was the actual cylindrical 3D forming of the valve. The microscopic tissue structure was assessed using histological cross sections stained with Masson's Trichrome and Picrosirius Red. The thick tissue remained uniformly populated with cells throughout the construction steps and the dense extracellular matrix presented corrugated fibers of collagen. This first prototype of tissue-engineered heart valve was installed in a bioreactor to assess its capacity to sustain a light pulsatile flow at a frequency of 0.5 Hz. Under the light pulsed flow, it was observed that the leaflets opened and closed according to the flow variations. This study demonstrates that the self-assembly method is a viable option for the construction of complex 3D shapes, such as heart valves, with an entirely biological material.

  7. Tissue-engineered trachea regeneration using decellularized trachea matrix treated with laser micropore technique.

    Science.gov (United States)

    Xu, Yong; Li, Dan; Yin, Zongqi; He, Aijuan; Lin, Miaomiao; Jiang, Gening; Song, Xiao; Hu, Xuefei; Liu, Yi; Wang, Jinpeng; Wang, Xiaoyun; Duan, Liang; Zhou, Guangdong

    2017-08-01

    Tissue-engineered trachea provides a promising approach for reconstruction of long segmental tracheal defects. However, a lack of ideal biodegradable scaffolds greatly restricts its clinical translation. Decellularized trachea matrix (DTM) is considered a proper scaffold for trachea cartilage regeneration owing to natural tubular structure, cartilage matrix components, and biodegradability. However, cell residual and low porosity of DTM easily result in immunogenicity and incomplete cartilage regeneration. To address these problems, a laser micropore technique (LMT) was applied in the current study to modify trachea sample porosity to facilitate decellular treatment and cell ingrowth. Decellularization processing demonstrated that cells in LMT treated samples were more easily removed compared with untreated native trachea. Furthermore, after optimizing the protocols of LMT and decellular treatments, the LMT-treated DTM (LDTM) could retain their original tubular shape with only mild extracellular matrix damage. After seeding with chondrocytes and culture in vitro for 8 weeks, the cell-LDTM constructs formed tubular cartilage with relatively homogenous cell distribution in both micropores and bilateral surfaces. In vivo results further confirmed that the constructs could form mature tubular cartilage with increased DNA and cartilage matrix contents, as well as enhanced mechanical strength, compared with native trachea. Collectively, these results indicate that LDTM is an ideal scaffold for tubular cartilage regeneration and, thus, provides a promising strategy for functional reconstruction of trachea cartilage. Lacking ideal biodegradable scaffolds greatly restricts development of tissue-engineered trachea. Decellularized trachea matrix (DTM) is considered a proper scaffold for trachea cartilage regeneration. However, cell residual and low porosity of DTM easily result in immunogenicity and incomplete cartilage regeneration. By laser micropore technique (LMT), the

  8. Technological requirements on refrigeration as seen by a frozen menu manufacturer; Technologische Anforderungen an die Kaeltetechnik aus der Sicht eines Tiefkuehl-Menue-Herstellers

    Energy Technology Data Exchange (ETDEWEB)

    Konietzko, M. [Apetito AG, Rheine (Germany)

    1995-12-31

    The present paper examines hour refrigeration in future will need to contribute to production pactices of frozen food manufacturers. This is exemplified for the practical everyday use of a froster. The paper also points out the limitations of present-day frozen menu manufacture. Finally, it discusses future demands on refrigeration regarding ecology and economy. Optimization tasks for the future are to increase freezing speed and render it controllable and to improve capacity control. (HW) [Deutsch] Es wird der Beitrag untersucht, den die Kaeltetechnik in der Produktionspraxis eines TK-Menue-Herstellers in Zukunft leisten muss. Hierzu werden der praktische, taegliche Einsatz am Beispiel eines TK-Frosters dargestellt. Ferner werden die heutigen Grenzen einer TK-Menue-Herstellung aufgezeigt. Abschliessend werden zukuenftige Anforderungen an die Kaeltetechnik unter den Aspekten Oekologie und Oekonomie beleuchtet. Zukuenftige Optimierungsansaetze liegen in einer besseren und angepassten Gefriergeschwindigkeit sowie in einer besser regulierbaren Leistung. (HW)

  9. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Guarino, Vincenzo, E-mail: vguarino@unina.it; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi [Institute for Polymers, Composites and Biomaterials, Department of Chemical Sciences & Materials Technology, National Research Council of Italy, V.le Kennedy 54, Naples (Italy)

    2015-12-17

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial’s manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell–biomaterial and cell– cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues.

  10. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    International Nuclear Information System (INIS)

    Guarino, Vincenzo; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi

    2015-01-01

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial’s manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell–biomaterial and cell– cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues

  11. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    Science.gov (United States)

    Guarino, Vincenzo; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi

    2015-12-01

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial's manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell-biomaterial and cell- cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues.

  12. A novel tissue engineering technique for regeneration of lost interdental papillary height

    Directory of Open Access Journals (Sweden)

    Rutuj Surana

    2010-01-01

    Full Text Available Open interdental spaces caused by papillary gingival recession are one of the most common problems faced in dentistry. Surgical and nonsurgical periodontal treatments for regeneration of lost papillary height have been reported with limited success. The present study reports effectiveness of autologous cultured fibroblast injections, a tissue engineering technique for papillary regeneration. A black triangle caused by Tarnow′s and Nordland′s class I papillary gingival loss was reported in maxillary anterior region of a young male patient. An autologous gingival biopsy was cultured in a biotechnology lab for the growth and expansion of fibroblasts. Cultured fibroblast suspension was injected into the receded papilla twice at an interval of 5 days. Follow-ups were recorded on the 6th day, 15 th day, at 1 month and at 2 months. Complete fill of black triangle was noted at the end of 2 months. No inflammatory or immune reactions were noted at the site of injection. Autologous cultured fibroblast injections are safe, efficacious, and an acceptable treatment option for the regeneration of lost papillary height.

  13. Adapting planning and scheduling concepts to an engineering perspective: Key issues and successful techniques

    International Nuclear Information System (INIS)

    Finnegan, J.M.

    1986-01-01

    Traditional approaches to engineering planning are slanted toward the formats and interests of downstream implementation, and do not always consider the form and criticality of the front-end engineering development process. These processes and scopes are less defined and more subjective than most construction and operations tasks, and require flexible scheduling methods. This paper discusses the characteristics and requirement of engineering schedules, presents concepts for approaching planning in this field, and illustrates simple methods for developing and analyzing engineering plans, and evaluating schedule performance. Engineering plans are structured into a schedule hierarchy which delineates appropriate control and responsibilities, and is governed by key evaluation and decision milestones. Schedule risk analysis considers the uncertainty of engineering tasks, and critical resource constraints. Methods to evaluate schedule performance recognize that engineers and managers are responsible for adequate planning and forecasting, and quality decisions, even if they cannot control all factors influencing schedule results

  14. The ATLAS Trigger in Run-2 - Design, Menu and Performance

    CERN Document Server

    Vazquez Schroeder, Tamara; The ATLAS collaboration

    2017-01-01

    The ATLAS trigger has been used very successfully for online event selection during the first part of the second LHC run (Run-2) in 2015/16 at a center-of-mass energy of 13 TeV. The trigger system is composed of a hardware Level-1 trigger and a software-based high-level trigger. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. The trigger system exploits topological information, as well as multi-variate methods to carry out the necessary physics filtering. In total, the ATLAS online selection consists of thousands of different individual triggers. Taken together constitute the trigger menu, which reflects the physics goals of the collaboration while taking into account available data taking resources. The trigger selection capabilities of ATLAS during Run-2 have been significantly improved compared to Run-1, in order to cope with the higher event rates and number of interactions per bunch crossing (pileup) which are the result of the...

  15. Efficient Techniques of Sparse Signal Analysis for Enhanced Recovery of Information in Biomedical Engineering and Geosciences

    KAUST Repository

    Sana, Furrukh

    2016-11-01

    Sparse signals are abundant among both natural and man-made signals. Sparsity implies that the signal essentially resides in a small dimensional subspace. The sparsity of the signal can be exploited to improve its recovery from limited and noisy observations. Traditional estimation algorithms generally lack the ability to take advantage of signal sparsity. This dissertation considers several problems in the areas of biomedical engineering and geosciences with the aim of enhancing the recovery of information by exploiting the underlying sparsity in the problem. The objective is to overcome the fundamental bottlenecks, both in terms of estimation accuracies and required computational resources. In the first part of dissertation, we present a high precision technique for the monitoring of human respiratory movements by exploiting the sparsity of wireless ultra-wideband signals. The proposed technique provides a novel methodology of overcoming the Nyquist sampling constraint and enables robust performance in the presence of noise and interferences. We also present a comprehensive framework for the important problem of extracting the fetal electrocardiogram (ECG) signals from abdominal ECG recordings of pregnant women. The multiple measurement vectors approach utilized for this purpose provides an efficient mechanism of exploiting the common structure of ECG signals, when represented in sparse transform domains, and allows leveraging information from multiple ECG electrodes under a joint estimation formulation. In the second part of dissertation, we adopt sparse signal processing principles for improved information recovery in large-scale subsurface reservoir characterization problems. We propose multiple new algorithms for sparse representation of the subsurface geological structures, incorporation of useful prior information in the estimation process, and for reducing computational complexities of the problem. The techniques presented here enable significantly

  16. Pengaruh Terpaan Komunikasi Pemasaran Menu Breakfast Mcdonald"s Keputusan Pembelian

    OpenAIRE

    Tasuki, Martia Mutiara; Pradekso, Tandiyo; Ulfa, Nurist Surayya

    2013-01-01

    PENGARUH TERPAAN KOMUNIKASI PEMASARAN MENU BREAKFAST MCDONALD'S DAN CITRA PRODUK TERHADAP KEPUTUSAN PEMBELIANSkripsiDisusun untuk memenuhi persyaratan menyelesaikanPendidikan Strata IJurusan Ilmu Komunikasi Fakultas Ilmu Sosial dan Ilmu PolitikUniversitas DiponegoroPenyusunNama : Martia Mutiara TasukiNIM : D2C 005 183JURUSAN ILMU KOMUNIKASIFAKULTAS ILMU SOSIAL DAN ILMU POLITIKUNIVERSITAS DIPONEGOROSEMARANG2013PENGARUH TERPAAN KOMUNIKASI PEMASARAN MENU BREAKFAST MCDONALD'S DAN CITRA PRODUK TER...

  17. Calorie Changes in Large Chain Restaurants: Declines in New Menu Items but Room for Improvement.

    Science.gov (United States)

    Bleich, Sara N; Wolfson, Julia A; Jarlenski, Marian P

    2016-01-01

    Large chain restaurants reduced the number of calories in newly introduced menu items in 2013 by about 60 calories (or 12%) relative to 2012. This paper describes trends in calories available in large U.S. chain restaurants to understand whether previously documented patterns persist. Data (a census of items for included restaurants) were obtained from the MenuStat project. This analysis included 66 of the 100 largest U.S. restaurants that are available in all three of the data years (2012-2014; N=23,066 items). Generalized linear models were used to examine: (1) per-item calorie changes from 2012 to 2014 among items on the menu in all years; and (2) mean calories in new items in 2013 and 2014 compared with items on the menu in 2012 only. Data were analyzed in 2014. Overall, calories in newly introduced menu items declined by 71 (or 15%) from 2012 to 2013 (p=0.001) and by 69 (or 14%) from 2012 to 2014 (p=0.03). These declines were concentrated mainly in new main course items (85 fewer calories in 2013 and 55 fewer calories in 2014; p=0.01). Although average calories in newly introduced menu items are declining, they are higher than items common to the menu in all 3 years. No differences in mean calories among items on menus in 2012, 2013, or 2014 were found. The previously observed declines in newly introduced menu items among large restaurant chains have been maintained, which suggests the beginning of a trend toward reducing calories. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  18. Penyusunan Dan Penyelenggaran A La Carte Menu Pada Hotel Sinabung Dan Resort

    OpenAIRE

    Nasution, Rahmawaty

    2011-01-01

    Dalam operasional hotel, hotel memiliki beberapa departemen yang mempunyai peranan yang sangat penting dalam penjualan jasa dan pelayanan, dan salah satunya adalah departemen Food & Beverage. Food & Beverage mempunyai peran yang sangat besar dalam sebuah hotel, karena pendapatan sebuah hotel yang terbesar ada pada Food & Beverage terutama pada restoran. Adapun salah satu nama jenis restoran yang ada di Hotel Sinabung. Hotel Sinabung menyediakan jenis menu antara lain A La Carte Menu. M...

  19. Assessing the Effects of Gender and Education on the Influence of Menu Labels Among Latino Consumers

    OpenAIRE

    Martinez-Cardoso, Aresha Maree

    2013-01-01

    Nutritional content labels on fast food and restaurant menus and signage have gained popularity and momentum with the recognized need to motivate individuals to improve their eating habits outside the home. However, no known studies have assessed nutrition and menu labeling behavior among Latino consumers while taking into consideration factors such as gender and education. Higher levels of education may influence the utility of menu labeling as more educated individuals recognize the benefi...

  20. Preferences for menu labelling formats of young adults in Brazil and in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Renata Carvalho de OLIVEIRA

    Full Text Available ABSTRACT Objective This pilot study was aimed at exploring preferences of young adults in two different contexts on restaurant menu labelling formats. Methods Five focus groups were conducted with 36 participants, two focus groups with 11 participants in Brazil and three focus groups with 25 in the United Kingdom. Themes originating from the content analysis of the transcriptions were organised around four possible menu labelling formats: 1 numerical information on calories; 2 numerical information on calories and nutrients; 3 traffic light system plus Guideline Daily Amounts; 4 food information with ingredients list plus highlighted symbols. Results In both countries, participants preferred the ingredients list plus symbols format, considered more comprehensive and useful to make an informed food choice. Organic food and vegetarian symbols were the ones considered most important to appear on restaurant menu labels with ingredients list. However, most participants in Brazil and in the United Kingdom rejected the information restricted to calories and calories plus nutrients formats, saying that these would not influence their own choices. Conclusion This is the first multicultural qualitative study exploring preferences of people living in different countries with different eating habits, but where menu labelling is voluntary. Results evidenced similarities in participants’ likes and dislikes for menu labelling formats in these two different contexts. Discussions showed participants in both countries prefer qualitative information than numerical information, suggesting that ingredients list and symbols provide information that people want to see on the menu.

  1. Fourteen-year trends in sodium content of menu offerings at eight leading fast-food restaurants in the USA.

    Science.gov (United States)

    Rudelt, Amanda; French, Simone; Harnack, Lisa

    2014-08-01

    To examine changes in the Na content of lunch/dinner menu offerings at eight of the leading fast-food restaurants in the USA between 1997/1998 and 2009/2010. Menu offerings and nutrient composition information for the menu items were obtained from archival versions of the University of Minnesota Nutrition Coordinating Center (NCC) Food and Nutrient Database. Nutrient composition information for lunch/dinner menu items sold by the fast-food restaurants included in the present study was updated in the database biannually. Menus were analysed for changes in mean Na content of all menu offerings (except beverages) and specific categories of menu items among all restaurants and for each individual restaurant. Lunch/dinner food menu of eight leading US fast-food restaurants. Between 1997/1998 and 2009/2010 the mean Na content of menu offerings across the eight restaurants increased by 23·4 %. Examining specific food categories, mean Na content of entrées by increased 17·2 % and that of condiments increased by 26·1 %. Only side dishes showed a decrease of 6·6 %. None of the restaurants examined had a decrease in Na across the lunch/dinner menu offerings over the 14 years examined. Results suggest that over the time period studied there has been no meaningful reduction in the Na content of lunch/dinner menu offerings at the leading fast-food restaurants examined in the present study.

  2. Potential effect of physical activity based menu labels on the calorie content of selected fast food meals.

    Science.gov (United States)

    Dowray, Sunaina; Swartz, Jonas J; Braxton, Danielle; Viera, Anthony J

    2013-03-01

    In this study we examined the effect of physical activity based labels on the calorie content of meals selected from a sample fast food menu. Using a web-based survey, participants were randomly assigned to one of four menus which differed only in their labeling schemes (n=802): (1) a menu with no nutritional information, (2) a menu with calorie information, (3) a menu with calorie information and minutes to walk to burn those calories, or (4) a menu with calorie information and miles to walk to burn those calories. There was a significant difference in the mean number of calories ordered based on menu type (p=0.02), with an average of 1020 calories ordered from a menu with no nutritional information, 927 calories ordered from a menu with only calorie information, 916 calories ordered from a menu with both calorie information and minutes to walk to burn those calories, and 826 calories ordered from the menu with calorie information and the number of miles to walk to burn those calories. The menu with calories and the number of miles to walk to burn those calories appeared the most effective in influencing the selection of lower calorie meals (p=0.0007) when compared to the menu with no nutritional information provided. The majority of participants (82%) reported a preference for physical activity based menu labels over labels with calorie information alone and no nutritional information. Whether these labels are effective in real-life scenarios remains to be tested. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Assessing an Entrepreneurship Education Project in Engineering Studies by Means of Participatory Techniques

    Science.gov (United States)

    Ortiz-Medina, Leovigilda; Fernández-Ahumada, Elvira; Lara-Vélez, Pablo; Garrido-Varo, Ana; Pérez-Marin, Dolores; Guerrero-Ginel, José Emilio

    2014-01-01

    The new imperatives of the knowledge-based society require engineering students to equip themselves with a broad range of skills, among which entrepreneurship plays a critical role. An academic itinerary was designed with the explicit aim of improving the entrepreneurial attitudes of agricultural engineering students in a state university in…

  4. Clinical translation of autologous cell-based tissue engineering techniques as Class III therapeutics in China: Taking cartilage tissue engineering as an example

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2014-04-01

    Full Text Available Autologous cell-based tissue engineering (TE techniques have been clinically approved for approximately 4 years in China, since the first cartilage TE technique was approved for clinical use by the Zhejiang Health Bureau. TE techniques offer a promising alternative to traditional transplantation surgery, and are different from those for transplanted tissues (biologics or pharmaceutical, the clinical translational procedures are unique and multitasked, and the requirements may differ from those of the target tissues. Thus, the translational procedure is still unfamiliar to most researchers and needs further improvement. This perspectives paper describes the key guidelines and regulations involved in the current translational process, and shares our translational experiences in cartilage TE to provide an example of autologous cell-based TE translation in China. Finally, we discuss the scientific and social challenges and provide some suggestions for future improvements.

  5. Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

    Science.gov (United States)

    McCray, Wilmon Wil L., Jr.

    The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization

  6. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    Directory of Open Access Journals (Sweden)

    Maya K. Vadiveloo

    2017-12-01

    Full Text Available Worksite cafeterias are compelling venues to improve diet quality through environmental changes.We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012–2015 were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes. Alternative protein sources replaced red meat; nutrient composition and nutrients purchased were compared using Food Pro software. Consumer responses were queried using online surveys; open-ended responses were analyzed using NVivo. Differences in sales and nutrient content pre-post menu redesign were tested with Wilcoxon Rank Sum tests. Gross sales of entrées (61 vs. 222servings/month; p=0.01 and side dishes (120 vs. 365servings/month; p=0.001 increased more than three-fold post-menu changes. Revenue from entrées (312 vs. 1144USD/month; p=0.01 and side dishes (238 vs. 914USD/month; p=0.001 also increased; per entrée, consumers purchased significantly more unsaturated fat (5g, and less saturated fat (3g and sodium (100mg. For side dishes, they purchased fewer calories (48kcal and unsaturated fat (2.9g, but more fiber (1.8g, and sodium (260mg. Four themes emerged from consumer responses: the importance of 1 variety, novelty, choice; 2 cost, affordability, value; 3 health; and 4 food quality, taste. Menu redesign can improve nutrient content, while also increasing sales and revenue. Multi-dimensional assessment of the nutritional, consumer, and retailer implications is desirable practice for enacting similar environmental changes. Keywords: Worksite health promotion, Food environment change, Consumer satisfaction, Menu redesign, Sales and revenue

  7. Chapter VIII. Contributions of propagation techniques and genetic modification to breeding - genetic engineering for disease resistance

    Science.gov (United States)

    Genetic engineering offers an opportunity to develop flower bulb crops with resistance to fungal, viral, and bacterial pathogens. Several of the flower bulb crops, Lilium spp., Gladiolus, Zantedeschia, Muscari, Hyacinthus, Narcissus, Ornithogalum, Iris, and Alstroemeria, have been transformed with t...

  8. Adaptive critic learning techniques for engine torque and air-fuel ratio control.

    Science.gov (United States)

    Liu, Derong; Javaherian, Hossein; Kovalenko, Olesia; Huang, Ting

    2008-08-01

    A new approach for engine calibration and control is proposed. In this paper, we present our research results on the implementation of adaptive critic designs for self-learning control of automotive engines. A class of adaptive critic designs that can be classified as (model-free) action-dependent heuristic dynamic programming is used in this research project. The goals of the present learning control design for automotive engines include improved performance, reduced emissions, and maintained optimum performance under various operating conditions. Using the data from a test vehicle with a V8 engine, we developed a neural network model of the engine and neural network controllers based on the idea of approximate dynamic programming to achieve optimal control. We have developed and simulated self-learning neural network controllers for both engine torque (TRQ) and exhaust air-fuel ratio (AFR) control. The goal of TRQ control and AFR control is to track the commanded values. For both control problems, excellent neural network controller transient performance has been achieved.

  9. Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage

    Science.gov (United States)

    Mansour, Joseph M.; Lee, Zhenghong; Welter, Jean F.

    2016-01-01

    In this review, methods for evaluating the properties of tissue engineered (TE) cartilage are described. Many of these have been developed for evaluating properties of native and osteoarthritic articular cartilage. However, with the increasing interest in engineering cartilage, specialized methods are needed for nondestructive evaluation of tissue while it is developing and after it is implanted. Such methods are needed, in part, due to the large inter- and intra-donor variability in the performance of the cellular component of the tissue, which remains a barrier to delivering reliable TE cartilage for implantation. Using conventional destructive tests, such variability makes it near-impossible to predict the timing and outcome of the tissue engineering process at the level of a specific piece of engineered tissue and also makes it difficult to assess the impact of changing tissue engineering regimens. While it is clear that the true test of engineered cartilage is its performance after it is implanted, correlation of pre and post implantation properties determined non-destructively in vitro and/or in vivo with performance should lead to predictive methods to improve quality-control and to minimize the chances of implanting inferior tissue. PMID:26817458

  10. Efficient Techniques of Sparse Signal Analysis for Enhanced Recovery of Information in Biomedical Engineering and Geosciences

    KAUST Repository

    Sana, Furrukh

    2016-01-01

    precision technique for the monitoring of human respiratory movements by exploiting the sparsity of wireless ultra-wideband signals. The proposed technique provides a novel methodology of overcoming the Nyquist sampling constraint and enables robust

  11. Reducing calories, fat, saturated fat, and sodium in restaurant menu items: Effects on consumer acceptance.

    Science.gov (United States)

    Patel, Anjali A; Lopez, Nanette V; Lawless, Harry T; Njike, Valentine; Beleche, Mariana; Katz, David L

    2016-12-01

    To assess consumer acceptance of reductions of calories, fat, saturated fat, and sodium to current restaurant recipes. Twenty-four menu items, from six restaurant chains, were slightly modified and moderately modified by reducing targeted ingredients. Restaurant customers (n = 1,838) were recruited for a taste test and were blinded to the recipe version as well as the purpose of the study. Overall consumer acceptance was measured using a 9-point hedonic (like/dislike) scale, likelihood to purchase scale, Just-About-Right (JAR) 5-point scale, penalty analysis, and alienation analysis. Overall, modified recipes of 19 menu items were scored similar to (or better than) their respective current versions. Eleven menu items were found to be acceptable in the slightly modified recipe version, and eight menu items were found to be acceptable in the moderately modified recipe version. Acceptable ingredient modifications resulted in a reduction of up to 26% in calories and a reduction of up to 31% in sodium per serving. The majority of restaurant menu items with small reductions of calories, fat, saturated fat, and sodium were acceptable. Given the frequency of eating foods away from home, these reductions could be effective in creating dietary improvements for restaurant diners. © 2016 The Obesity Society.

  12. Environmental and Individual Factors Affecting Menu Labeling Utilization: A Qualitative Research Study

    Science.gov (United States)

    Schindler, Jennifer; Kiszko, Kamila; Abrams, Courtney; Islam, Nadia; Elbel, Brian

    2013-01-01

    Obesity is a significant public health concern that disproportionally affects low-income and minority populations. Recent policies mandating the posting of calories on menus in fast food chain restaurants have not proven to uniformly influence food choice. This qualitative research study uses focus groups to study individual and environmental factors affecting the usage of these menu labels among low-income, minority populations. Ten focus groups targeting low-income residents (n=105) were conducted at various community organizations throughout NYC in Spanish, English, or a combination of both languages, over a nine-month period in 2011. In late 2011 and early 2012, transcripts were coded through the process of thematic analysis using Atlas.ti for naturally emerging themes, influences, and determinants of food choice. Few used menu labels, despite awareness. Among the themes pertaining to menu label usage, price and time constraints, confusion and lack of understanding of caloric values, as well as the priority of preference, hunger, and habitual ordering habits were most frequently cited as barriers to menu label usage. Based on the individual and external influences on food choice that often take priority over calorie consideration, a modified approach may be necessary to make menu labels more effective and user-friendly. PMID:23402695

  13. The history and impact of the New York City menu labeling law.

    Science.gov (United States)

    Bernell, Brent

    2010-01-01

    As a result of the recent federal health care legislation, all restaurants in the United States that are part of a chain with twenty or more locations serving substantially the same menu items will be required to post the calorie information of the food they serve directly on menus and menu boards. This development represents the culmination of a regulatory initiative to combat the growth of obesity that only began in 2006 with the decision by the New York City Board of Health to require calorie posting in New York City chain restaurants. That initiative, Regulation 81.50, was the first of its kind in the United States; and yet, less than four years later, the idea has become a national standard. This paper tracks the history of New York City's landmark regulation, detailing the drafting of the law, the initial legal victory for the restaurant association challenging it, and the ultimate triumph of the City in winning legal validation of its calorie posting mandate. In doing so, this paper will also use the New York City regulation as a launching point to discuss the rationale behind menu labeling, to examine the potential legal pitfalls of menu labeling laws, to track the development of the initiative from New York City to a national standard, and finally, to evaluate the preliminary data on whether or not menu labeling is actually effective in achieving its ultimate goal: changing consumer eating habits and reducing obesity.

  14. An electrochemical engineering technique to improve the corrosion resistance of some structural materials in lead-alloy coolants

    International Nuclear Information System (INIS)

    Tacica, M.; Andrei, V.; Rusu, O.; Coaca, E.; Minca, M.; Florea, S.; Oncioiu, G.

    2013-01-01

    The goal of this paper is to present some conclusions resulted from the literature studies referring to the materials potential to be used in Lead Fast Reactors (LFR), and the results obtained in the surface engineering field which can be used in our institute in order to obtain materials with appropriate properties for their use in LFR. In this context, the paper presents some preliminary results obtained in Surface Analysis Laboratory of INR Pitesti and research works in progress referring to: controlled modification of AISI 316 L surface by electrochemical plasma treatment (carburization, nitrocarburizings); electrodeposition of some protective thin-films based on Ni and Al obtained from ionic liquids; development of some procedures related to the activities involved in the behaviour evaluation, in LFR specific conditions, for material samples subjected to treatments by surface engineering techniques using the LEad COrrosion TEsting LOop (LECOTELO) test bench. The superficial structures obtained have been characterized by metallographic microscopy, X-Ray Photoemission Spectroscopy (XPS), Electrochemical Impedance Spectroscopy (EIS); the electrochemical techniques were used to evaluate the corrosion behaviour. The preliminary results have shown that the used electrochemical surface engineering techniques are appropriate in order to improve the mechanical properties and corrosion behaviour of AISI 316 L steel. (authors)

  15. Using the ultrasound and instrumented indentation techniques to measure the elastic modulus of engineering materials

    International Nuclear Information System (INIS)

    Meza, J. M.; Franco, E. E.; Farias, M. C. M.; Buiochi, F.; Souza, R. M.; Cruz, J.

    2008-01-01

    Currently, the acoustic and nano indentation techniques are two of the most used techniques for materials elastic modulus measurement. In this article fundamental principles and limitations of both techniques are shown and discussed. Last advances in nano indentation technique are also reviewed. an experimental study in ceramic, metallic, composite and single crystals was also done. Results shown that ultrasonic technique is capable to provide results in agreement with those reported in literature. However, ultrasonic technique does not allow measuring the elastic modulus of some small samples and single crystals. On the other hand, the nano indentation technique estimates the elastic modulus values in reasonable agreement with those measured by acoustic methods, particularly in amorphous materials, while in some policristaline materials some deviation from expected values was obtained. (Author) 29 refs

  16. In-cylinder pressure-based direct techniques and time frequency analysis for combustion diagnostics in IC engines

    International Nuclear Information System (INIS)

    D’Ambrosio, S.; Ferrari, A.; Galleani, L.

    2015-01-01

    Highlights: • Direct pressure-based techniques have been applied successfully to spark-ignition engines. • The burned mass fraction of pressure-based techniques has been compared with that of 2- and 3-zone combustion models. • The time frequency analysis has been employed to simulate complex diesel combustion events. - Abstract: In-cylinder pressure measurement and analysis has historically been a key tool for off-line combustion diagnosis in internal combustion engines, but online applications for real-time condition monitoring and combustion management have recently become popular. The present investigation presents and compares different low computing-cost in-cylinder pressure based methods for the analyses of the main features of combustion, that is, the start of combustion, the end of combustion and the crankshaft angle that responds to half of the overall burned mass. The instantaneous pressure in the combustion chamber has been used as an input datum for the described analytical procedures and it has been measured by means of a standard piezoelectric transducer. Traditional pressure-based techniques have been shown to be able to predict the burned mass fraction time history more accurately in spark ignition engines than in diesel engines. The most suitable pressure-based techniques for both spark ignition and compression ignition engines have been chosen on the basis of the available experimental data. Time–frequency analysis has also been applied to the analysis of diesel combustion, which is richer in events than spark ignited combustion. Time frequency algorithms for the calculation of the mean instantaneous frequency are computationally efficient, allow the main events of the diesel combustion to be identified and provide the greatest benefits in the presence of multiple injection events. These algorithms can be optimized and applied to onboard diagnostics tools designed for real control, but can also be used as an advanced validation tool for

  17. Development of Web-Based Menu Planning Support System and its Solution Using Genetic Algorithm

    Science.gov (United States)

    Kashima, Tomoko; Matsumoto, Shimpei; Ishii, Hiroaki

    2009-10-01

    Recently lifestyle-related diseases have become an object of public concern, while at the same time people are being more health conscious. As an essential factor for causing the lifestyle-related diseases, we assume that the knowledge circulation on dietary habits is still insufficient. This paper focuses on everyday meals close to our life and proposes a well-balanced menu planning system as a preventive measure of lifestyle-related diseases. The system is developed by using a Web-based frontend and it provides multi-user services and menu information sharing capabilities like social networking services (SNS). The system is implemented on a Web server running Apache (HTTP server software), MySQL (database management system), and PHP (scripting language for dynamic Web pages). For the menu planning, a genetic algorithm is applied by understanding this problem as multidimensional 0-1 integer programming.

  18. Revaluasi Inventory dengan Menu Standard pada SAP-B1 Sesuaikah dengan IFRS

    Directory of Open Access Journals (Sweden)

    Eka Novianti

    2011-05-01

    Full Text Available Some available standard modules in SAP-B1 can be adapted for changes in accounting rules and regulations. One is the Inventory Revaluation menu of Inventory module. Users can use the menu to make Inventory value adjustments of value in SAP-B1, to be consistent with the values that must be presented in the financial statements. Based on the flexibility provided by SAP-B1menu, should not be too difficult for users of SAP-B1 to manage accounting transactions based on accounting rules that apply today, IFRS. IFRS requirements on inventory adjustment transactions with a value of SAP-B1 could be done more easily.

  19. Passive Techniques for Fan Noise Reduction in New Turbofan Engines: Review

    Directory of Open Access Journals (Sweden)

    M.Gorj-Bandpy

    2013-03-01

    Full Text Available Among the various environmental concerns, the aircraft noise item has been constantly growing in importance over the past years. Measures for its reduction at the source as well its mitigation around airports must take into account aspects of medicine and technical design as well as legal and land use planning aspects. Fan noise is one of the principal noise sources in turbofan aero-engines. In this paper a review of the main technologies employed for the reduction of fan noise turbofan engines is presented.

  20. Man and the chip in nuclear engineering - techniques in information processing

    International Nuclear Information System (INIS)

    1987-12-01

    Hardware and software tools are available which cover the whole range of planning, construction and operation of nuclear facilities; they accelerate and further perfect working processes, and improve communication between man and machine. The application of data processing and electronics in nuclear engineering are evaluated for their present-day extent. 25 papers highlight on-line process control systems, computer-aided management systems, monitoring and diagnosis, EDP application in the planning and construction of industrial-scale plants, simulators, and expert systems used in engineering. All papers were abstracted and entered separately into the data base. (DG) [de

  1. The Improvement of Kansei Engineering by Using the Repertory Grid Technique

    Directory of Open Access Journals (Sweden)

    Steinberg Falk

    2015-09-01

    Full Text Available A customer-oriented approach to product development with particular consideration of emotions is represented by Kansei Engineering. Developed by Mitsuo Nagamachi, Kansei Engineering is characterized by the possibility to capture customer perceptions and to translate them into product features. In order to assess these perceptions, a semantic space is generated. For this purpose it is necessary to identify Kansei words that are gathered up through research in marketing concepts, scientific journals and service reports. This procedure though displays the disadvantage of not being able to identify all emotions referring to the investigated product.

  2. Ready for policy? Stakeholder attitudes toward menu labelling in Toronto, Canada.

    Science.gov (United States)

    Mah, Catherine L; Vanderlinden, Loren; Mamatis, Dia; Ansara, Donna L; Levy, Jennifer; Swimmer, Lisa

    2013-04-18

    The purpose of this research was to assess key stakeholder attitudes regarding menu labelling in Toronto, the largest municipality in Canada. Menu labelling is a population health intervention where food-labelling principles are applied to the eating-out environment through disclosure of nutrient content of food items on restaurant menus at the point of sale. Menu-labelling legislation has been implemented in the United States, but has yet to be adopted in Canada. As provincial voluntary programs and federal analyses progress, municipal jurisdictions will need to assess the feasibility of moving forward with parallel interventions. Data were collected and analyzed in late 2011 to early 2012, including: a consumer eating-out module incorporated into a public health surveillance telephone survey (n=1,699); an online survey of independent restaurant operators (n=256); in-depth key informant interviews with executives and decision makers at chain restaurants (n=9); and a policy consultation with local restaurant associations. Toronto residents, particularly men, younger adults, and those with higher income or education, frequently eat out. A majority indicated that nutrition information is important to them; 69% note that they currently use it and 78% reported they would use it if it were readily available. Resistance to menu-labelling requirements at the municipal level was articulated by franchise/chain restaurant executives and industry associations. Despite overall low interest among independent restaurant operators, 57% reported feeling some responsibility to provide nutrition information and 50% believed it could be good for business. This research supports earlier literature that indicates strong public support for menu labelling alongside perceived barriers among the restaurant and foodservices sector. Leverage points for effective operator engagement for menu-labelling adoption were identified, nonetheless, highlighting the need for public health support.

  3. Macronutrient Composition of Menu Offerings in Fast Food Restaurants in the U.S.

    Science.gov (United States)

    Jarlenski, Marian P; Wolfson, Julia A; Bleich, Sara N

    2016-10-01

    A high intake of fast food is associated with increased obesity risk. This study assessed recent changes in caloric content and macronutrient composition in large U.S. fast food restaurants. Data from the MenuStat project included 11,737 menu items in 37 fast food restaurants from 2012 to 2014. Generalized linear models were used to examine changes in the caloric content and corresponding changes in the macronutrient composition (non-sugar carbohydrates, sugar, unsaturated fat, saturated fat, and protein) of menu items over time. Additionally, macronutrient composition was compared in menu items newly introduced in 2013 and 2014, relative to 2012. Analyses, conducted in January 2016, controlled for restaurant and were stratified by menu categories. Overall, there was a 22-calorie reduction in food items from 2012 to 2014. Beverages had a 46-calorie increase, explained by an increase in calories from sugar (12 calories) and saturated fat (16 calories). Newly introduced main courses in 2014 had 59 calories fewer than those on 2012 menus, explained by a 54-calorie reduction in unsaturated fat, while other macronutrient content remained fairly constant. Newly introduced dessert items in 2014 had 90 calories more than those on 2012 menus, explained primarily by an increase of 57 calories of sugar. Overall, there were relatively minor changes in menu items' caloric and macronutrient composition. Although declines in caloric content among newly introduced fast food main courses may improve the public's caloric intake, it appears that the macronutrient composition of newly introduced items did not shift to a healthier profile. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  4. The impact of menu energy labelling across socioeconomic groups: A systematic review.

    Science.gov (United States)

    Sarink, Danja; Peeters, Anna; Freak-Poli, Rosanne; Beauchamp, Alison; Woods, Julie; Ball, Kylie; Backholer, Kathryn

    2016-04-01

    Menu energy labelling at point of purchase is gaining traction worldwide, yet the potential impact for different socioeconomic groups is unclear. We aimed to summarise evidence on the effectiveness of menu energy labelling by socioeconomic position (SEP). A systematic search for papers published to September 2015 was conducted using terms for labelling, food outlets, and SEP. Quality of studies was assessed. Results were summarised across stages of an intervention logic pathway. Eighteen papers were identified. Of twelve studies reporting the effect of menu energy labelling in low SEP populations, six reported on purchase outcomes. All but one of these reported no positive effect of the policy for this population. Two of the five studies that compared purchase outcomes of menu labelling across SEP groups reported that the policy was effective overall. These two studies reported either a significant decline in fast food calories purchased from consumers in high (but not low) SEP neighbourhoods or a significantly greater decline in calories purchased among consumers visiting stores in higher SEP neighbourhoods post policy implementation. None of the included papers reached the highest quality score. The current evidence describing the impact of menu energy labelling within or across SEP is limited in quantity and quality. Of the two studies that reported a positive benefit of menu energy labelling overall, both identified a greater effect on fast food purchases among consumers visiting stores in high compared to low SEP neighbourhoods. It is difficult to know whether the absence of effectiveness reported in low SEP populations represents a true lack of effectiveness or is a result of a more general lack of policy effectiveness or the limited quality of the reviewed studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Photolithography and micromolding techniques for the realization of 3D polycaprolactone scaffolds for tissue engineering applications

    KAUST Repository

    Limongi, Tania; Schipani, Rossana; Di Vito, Anna; Giugni, Andrea; Francardi, Marco; Torre, Bruno; Allione, Marco; Miele, Ermanno; Malara, Natalia Maria; Alrasheed, Salma; Raimondo, Raffaella; Candeloro, Patrizio; Mollace, Vincenzo; Di Fabrizio, Enzo M.

    2015-01-01

    Material science, cell biology, and engineering are all part of the research field of tissue engineering. It is the application of knowledge, methods and instrumentations of engineering and life science to the development of biocompatible solutions for repair and/or replace tissues and damaged organs. Last generation microfabrication technologies utilizing natural and synthetic biomaterials allow the realization of scaffolds resembling tissue-like structures as skin, brain, bones, muscles, cartilage and blood vessels. In this work we describe an effective and simple micromolding fabrication process allowing the realization of 3D polycaprolactone (PCL) scaffold for human neural stem cells (hNSC) culture. Scanning Electron Microscopy has been used to investigate the micro and nano features characterizing the surface of the device. Immunofluorescence analysis showed how, after seeding cells onto the substrate, healthy astrocytes grew up in a well-organized 3D network. Thus, we proposed this effective fabrication method for the production of nanopatterned PCL pillared scaffold providing a biomimetic environment for the growth of hNSC, a promising and efficient means for future applications in tissue engineering and regenerative medicine.

  6. Towards a Rigorous Formulation of the Space Mapping Technique for Engineering Design

    DEFF Research Database (Denmark)

    Koziel, Slawek; Bandler, John W.; Madsen, Kaj

    2005-01-01

    This paper deals with the Space Mapping (SM) approach to engineering design optimization. We attempt here a theoretical justification of methods that have already proven efficient in solving practical problems, especially in the RF and microwave area. A formal definition of optimization algorithm...

  7. Identifying Engineering Students' English Sentence Reading Comprehension Errors: Applying a Data Mining Technique

    Science.gov (United States)

    Tsai, Yea-Ru; Ouyang, Chen-Sen; Chang, Yukon

    2016-01-01

    The purpose of this study is to propose a diagnostic approach to identify engineering students' English reading comprehension errors. Student data were collected during the process of reading texts of English for science and technology on a web-based cumulative sentence analysis system. For the analysis, the association-rule, data mining technique…

  8. Effective Design of Educational Virtual Reality Applications for Medicine Using Knowledge-Engineering Techniques

    Science.gov (United States)

    Górski, Filip; Bun, Pawel; Wichniarek, Radoslaw; Zawadzki, Przemyslaw; Hamrol, Adam

    2017-01-01

    Effective medical and biomedical engineering education is an important problem. Traditional methods are difficult and costly. That is why Virtual Reality is often used for that purpose. Educational medical VR is a well-developed IT field, with many available hardware and software solutions. Current solutions are prepared without methodological…

  9. Application of systems engineering techniques (reliability, availability, maintainability, and dollars) to the Gas Centrifuge Enrichment Plant

    International Nuclear Information System (INIS)

    Boylan, J.G.; DeLozier, R.C.

    1982-01-01

    The systems engineering function for the Gas Centrifuge Enrichment Plant (GCEP) covers system requirements definition, analyses, verification, technical reviews, and other system efforts necessary to assure good balance of performance, safety, cost, and scheduling. The systems engineering function will support the design, installation, start-up, and operational phases of GCEP. The principal objectives of the systems engineering function are to: assure that the system requirements of the GCEP process are adequately specified and documented and that due consideration and emphasis are given to all aspects of the project; provide system analyses of the designs as they progress to assure that system requirements are met and that GCEP interfaces are compatible; assist in the definition of programs for the necessary and sufficient verification of GCEP systems; and integrate reliability, maintainability, logistics, safety, producibility, and other related specialties into a total system effort. This paper addresses the GCEP reliability, availability, maintainability, and dollars (RAM dollars) analyses which are the primary systems engineering tools for the development and implementation of trade-off studies. These studies are basic to reaching cost-effective project decisions. The steps necessary to achieve optimum cost-effective design are shown

  10. The rotator cuff: from bench to bedside. Developments in tissue engineering, surgical techniques and pathogenetic factors

    NARCIS (Netherlands)

    Longo, U.G.

    2012-01-01

    This thesis originates from the difficulties in the management of patients with rotator cuff tears. Since tendon healing rate is relatively slow compared with other connective tissues, we reviewed the available literature on tissue engineered biological augmentation for tendon healing, including

  11. Assessing and mitigating risks of engineering programs with lean management techniques

    DEFF Research Database (Denmark)

    Fritz, A.; Oehmen, Josef; Rebentisch, E.

    2014-01-01

    for a specific program are identified and how the effort for implementation of these lean best practices is estimated. Large-scale engineering programs have as results usually complex technical products or systems such as airplanes, satellites (GPS) or software programs, immense infrastructure efforts like...

  12. Development of free-piston Stirling engine performance and optimization codes based on Martini simulation technique

    Science.gov (United States)

    Martini, William R.

    1989-01-01

    A FORTRAN computer code is described that could be used to design and optimize a free-displacer, free-piston Stirling engine similar to the RE-1000 engine made by Sunpower. The code contains options for specifying displacer and power piston motion or for allowing these motions to be calculated by a force balance. The engine load may be a dashpot, inertial compressor, hydraulic pump or linear alternator. Cycle analysis may be done by isothermal analysis or adiabatic analysis. Adiabatic analysis may be done using the Martini moving gas node analysis or the Rios second-order Runge-Kutta analysis. Flow loss and heat loss equations are included. Graphical display of engine motions and pressures and temperatures are included. Programming for optimizing up to 15 independent dimensions is included. Sample performance results are shown for both specified and unconstrained piston motions; these results are shown as generated by each of the two Martini analyses. Two sample optimization searches are shown using specified piston motion isothermal analysis. One is for three adjustable input and one is for four. Also, two optimization searches for calculated piston motion are presented for three and for four adjustable inputs. The effect of leakage is evaluated. Suggestions for further work are given.

  13. Photolithography and micromolding techniques for the realization of 3D polycaprolactone scaffolds for tissue engineering applications

    KAUST Repository

    Limongi, Tania

    2015-06-01

    Material science, cell biology, and engineering are all part of the research field of tissue engineering. It is the application of knowledge, methods and instrumentations of engineering and life science to the development of biocompatible solutions for repair and/or replace tissues and damaged organs. Last generation microfabrication technologies utilizing natural and synthetic biomaterials allow the realization of scaffolds resembling tissue-like structures as skin, brain, bones, muscles, cartilage and blood vessels. In this work we describe an effective and simple micromolding fabrication process allowing the realization of 3D polycaprolactone (PCL) scaffold for human neural stem cells (hNSC) culture. Scanning Electron Microscopy has been used to investigate the micro and nano features characterizing the surface of the device. Immunofluorescence analysis showed how, after seeding cells onto the substrate, healthy astrocytes grew up in a well-organized 3D network. Thus, we proposed this effective fabrication method for the production of nanopatterned PCL pillared scaffold providing a biomimetic environment for the growth of hNSC, a promising and efficient means for future applications in tissue engineering and regenerative medicine.

  14. Using Web 2.0 Techniques in NASA's Ares Engineering Operations Network (AEON) Environment - First Impressions

    Science.gov (United States)

    Scott, David W.

    2010-01-01

    The Mission Operations Laboratory (MOL) at Marshall Space Flight Center (MSFC) is responsible for Engineering Support capability for NASA s Ares rocket development and operations. In pursuit of this, MOL is building the Ares Engineering and Operations Network (AEON), a web-based portal to support and simplify two critical activities: Access and analyze Ares manufacturing, test, and flight performance data, with access to Shuttle data for comparison Establish and maintain collaborative communities within the Ares teams/subteams and with other projects, e.g., Space Shuttle, International Space Station (ISS). AEON seeks to provide a seamless interface to a) locally developed engineering applications and b) a Commercial-Off-The-Shelf (COTS) collaborative environment that includes Web 2.0 capabilities, e.g., blogging, wikis, and social networking. This paper discusses how Web 2.0 might be applied to the typically conservative engineering support arena, based on feedback from Integration, Verification, and Validation (IV&V) testing and on searching for their use in similar environments.

  15. Restoration of badlands through applying bio-engineering techniques in active gully systems: Evidence from the Ecuadorian Andes

    Science.gov (United States)

    Borja, P.; Vanacker, V.; Alvarado, D.; Govers, G.

    2012-04-01

    A better insight in the processes controlling sediment generation, transport and deposition in badlands is necessary to enhance restoration of degraded soils through eco-engineering techniques. In this study, we evaluate the effect of different bio-engineering measures on soil and slope stability. Five micro-catchments (of 0.2 to 5 ha) were selected within a 3 km2 area in the lower part of the Loreto catchment (Southern Ecuadorian Andes). The micro-catchments differ only by land cover and degree of implementation of soil and water conservation measures. Bio-engineering techniques were used to construct dikes made of fascines of wooden sticks and earth-filled tires in active gully beds, where they are most efficient to reduce water and sediment transport. The experimental design consists of three micro-catchments within highly degraded lands: (DI) micro-catchment with bio-engineering measures concentrated in the active gully beds, (DF) with reforestation of Eucalyptus trees, and (DT) reference situation without any conservation measures. Two micro-catchments were monitored in agricultural lands with (AI) and without (AT) bio-engineering measures in the active gully beds. All catchments were equipped with San Dimas flumes to measure water flow, and sediment traps to monitor sediment export. In the (active) gully beds, various parameters related to gully stability (soil water content, bed elevation, vegetation cover, sedimentation/erosion) were monitored at weekly intervals. First results show that bio-engineering techniques are efficient to stabilize active gully beds through a reduction of the rapid concentration of excess rainfall and the sediment production and transfer. Fascines made of wooden sticks are far more efficient than earth-filled tires. Sediment deposition behind dikes is strongly dependent on precedent rainfall events, and the slope and vegetation cover of the gully floor. The sediment deposited facilitates colonization of the gully floor by native

  16. Translation of the Chinese Menu from the Perspective of Food Culture

    Institute of Scientific and Technical Information of China (English)

    汪平心

    2015-01-01

    Chinese food culture is similar to a pearl shinning in this era of globalization.Due to a higher frequency of cross-cultural communication than ever before,people from western countries show increasing interests in Chinese cuisine.Therefore,a standardized translation of the Chinese menu plays a more indispensible role in grasping the precise understanding of Chinese food names for foreign diners.From a cultural perspective,this paper primarily discusses various differences between Chinese and Western food cultures,and provides major translation principles and tips of the Chinese menu so as to arrive at a standardized translation as clearly and accessibly as possible.

  17. Translation of the Chinese Menu from the Perspective of Food Culture

    Institute of Scientific and Technical Information of China (English)

    汪平心

    2015-01-01

    Chinese food culture is similar to a pearl shinning in this era of globalization. Due to a higher frequency of cross-cultural communication than ever before, people from western countries show increasing interests in Chinese cuisine. Therefore, a standardized translation of the Chinese menu plays a more indispensible role in grasping the precise understanding of Chinese food names for foreign diners. From a cultural perspective, this paper primarily discusses various differences between Chinese and Western food cultures, and provides major translation principles and tips of the Chinese menu so as to arrive at a standardized translation as clearly and accessibly as possible.

  18. DietPal: a Web-based dietary menu-generating and management system.

    Science.gov (United States)

    Noah, Shahrul A; Abdullah, Siti Norulhuda; Shahar, Suzana; Abdul-Hamid, Helmi; Khairudin, Nurkahirizan; Yusoff, Mohamed; Ghazali, Rafidah; Mohd-Yusoff, Nooraini; Shafii, Nik Shanita; Abdul-Manaf, Zaharah

    2004-01-30

    Attempts in current health care practice to make health care more accessible, effective, and efficient through the use of information technology could include implementation of computer-based dietary menu generation. While several of such systems already exist, their focus is mainly to assist healthy individuals calculate their calorie intake and to help monitor the selection of menus based upon a prespecified calorie value. Although these prove to be helpful in some ways, they are not suitable for monitoring, planning, and managing patients' dietary needs and requirements. This paper presents a Web-based application that simulates the process of menu suggestions according to a standard practice employed by dietitians. To model the workflow of dietitians and to develop, based on this workflow, a Web-based system for dietary menu generation and management. The system is aimed to be used by dietitians or by medical professionals of health centers in rural areas where there are no designated qualified dietitians. First, a user-needs study was conducted among dietitians in Malaysia. The first survey of 93 dietitians (with 52 responding) was an assessment of information needed for dietary management and evaluation of compliance towards a dietary regime. The second study consisted of ethnographic observation and semi-structured interviews with 14 dietitians in order to identify the workflow of a menu-suggestion process. We subsequently designed and developed a Web-based dietary menu generation and management system called DietPal. DietPal has the capability of automatically calculating the nutrient and calorie intake of each patient based on the dietary recall as well as generating suitable diet and menu plans according to the calorie and nutrient requirement of the patient, calculated from anthropometric measurements. The system also allows reusing stored or predefined menus for other patients with similar health and nutrient requirements. We modeled the workflow of

  19. The History and Impact of the New York City Menu-Labeling Law

    OpenAIRE

    Bernell, Brent

    2010-01-01

    As a result of the recent federal health care legislation, all restaurants in the United States that are part of a chain with twenty or more locations will be required to post the calorie information of the food they serve directly on the menu or menu board. This development represents the culmination of a regulatory initiative to combat the growth of obesity that only began in 2006 with the decision by the New York City Board of Health to require calorie posting in New York City chain resta...

  20. An Electronic Engineering Curriculum Design Based on Concept-Mapping Techniques

    Science.gov (United States)

    Toral, S. L.; Martinez-Torres, M. R.; Barrero, F.; Gallardo, S.; Duran, M. J.

    2007-01-01

    Curriculum design is a concern in European Universities as they face the forthcoming European Higher Education Area (EHEA). This process can be eased by the use of scientific tools such as Concept-Mapping Techniques (CMT) that extract and organize the most relevant information from experts' experience using statistics techniques, and helps a…

  1. Cellular uptake and intracellular fate of engineered nanoparticles: a review on the application of imaging techniques.

    Science.gov (United States)

    Tantra, Ratna; Knight, Alex

    2011-09-01

    The use of imaging tools to probe nanoparticle-cell interactions will be crucial to elucidating the mechanisms of nanoparticle-induced toxicity. Of particular interest are mechanisms associated with cell penetration, translocation and subsequent accumulation inside the cell, or in cellular compartments. The objective of the present paper is to review imaging techniques that have been previously used in order to assess such interactions, and new techniques with the potential to be useful in this area. In order to identify the most suitable techniques, they were evaluated and matched against a list of evaluation criteria. We conclude that limitations exist with all of the techniques and the ultimate choice will thus depend on the needs of end users, and their particular application. The state-of-the-art techniques appear to have the least limitations, despite the fact that they are not so well established and still far from being routine. For example, super-resolution microscopy techniques appear to have many advantages for understanding the details of the interactions between nanoparticles and cells. Future research should concentrate on further developing or improving such novel techniques, to include the development of standardized methods and appropriate reference materials.

  2. Development of reactor accident diagnostic system DISKET using knowledge engineering technique

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Yoshida, Kazuo; Kohsaka, Atsuo; Yamamoto, Minoru.

    1986-01-01

    An accident diagnostic system DISKET has been developed to identify the cause and the type of an abnormal transient of a nuclear power plant. The system is based on the knowledge engineering (KE) and consists of an inference engine IERIAS and a knowledge base. The main features of DISKET are the following : (1) Time-varying characteristics of transients can be treated. (2) Knowledge base can be divided into several knowledge units to handle a lot of rules effectively. (3) Programming language UTILISP, which is a dialect of LISP, is used to manipulate symbolic data effectively. For the verification of DISKET, performance tests have been conducted for several types of accidents. The knowledge base used in the tests was generated from the data of various types of transients produced by a PWR plant simulator. The results of verification studies showed a good applicability of DISKET to reactor accident diagnosis. (author)

  3. Technique and the scheme of engineering-seismometric supervision over seismic events on large dams

    Energy Technology Data Exchange (ETDEWEB)

    Karapetyan, S.; Babayan, T.; Mkrtchyan, G. [National Academy of Sciences of the Republic of Armenia (Armenia). Inst. of Geophysics and Engineering Seismology

    2004-07-01

    A network of engineering-seismometric monitoring stations have been installed at the Tavshout dam in a seismically active region of Armenia. The 37 meter high embankment dam consists of gravel-pebbles with a core of sandy clay. Recent earthquakes have presented a direct hazard for the dam and its water reservoir. In order to determine the degree of seismic hazard and prevention, it is necessary to study the interaction between the ground and the foundation of the dam. The seismometers were fixed at three points both on the foundation and the ground to obtain information on the whole route of seismic waves and to define the geology based amplification factors using empirical equations. The system of engineering-seismometric observations included a network of seismometric instruments, communications and a recording complex. 4 refs., 14 figs.

  4. Porous starch/cellulose nanofibers composite prepared by salt leaching technique for tissue engineering.

    Science.gov (United States)

    Nasri-Nasrabadi, Bijan; Mehrasa, Mohammad; Rafienia, Mohammad; Bonakdar, Shahin; Behzad, Tayebeh; Gavanji, Shahin

    2014-08-08

    Starch/cellulose nanofibers composites with proper porosity pore size, mechanical strength, and biodegradability for cartilage tissue engineering have been reported in this study. The porous thermoplastic starch-based composites were prepared by combining film casting, salt leaching, and freeze drying methods. The diameter of 70% nanofibers was in the range of 40-90 nm. All samples had interconnected porous morphology; however an increase in pore interconnectivity was observed when the sodium chloride ratio was increased in the salt leaching. Scaffolds with the total porogen content of 70 wt% exhibited adequate mechanical properties for cartilage tissue engineering applications. The water uptake ratio of nanocomposites was remarkably enhanced by adding 10% cellulose nanofibers. The scaffolds were partially destroyed due to low in vitro degradation rate after more than 20 weeks. Cultivation of isolated rabbit chondrocytes on the fabricated scaffold proved that the incorporation of nanofibers in starch structure improves cell attachment and proliferation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Probing Enzyme-Surface Interactions via Protein Engineering and Single-Molecule Techniques

    Science.gov (United States)

    2017-06-26

    SECURITY CLASSIFICATION OF: The overall objective of this research was to exploit protein engineering and fluorescence single-molecule methods to...enhance our understanding of the interaction of proteins and surfaces. Given this objective, the specific aims of this research were to: 1) exploit the...incorporation of unnatural amino acids in proteins to introduce single-molecule probes (i.e., fluorophores for fluorescence resonance energy transfer

  6. Production technique of vermicular graphite iron cylinder head of vehicle diesel engine

    OpenAIRE

    Zhou Gen; Liu Wanhua

    2008-01-01

    The 25 years’production and application have proved that vermicular graphite iron cylinder heads with vermicularity ≥50% satisfy the machinability and performance demand of diesel engine. The method, in which using cupola-induction furnace duplex melting and pour-over process with rare earth-ferrosilicon or rare earthsilicon compound as vermicularizing alloy plus rare earth-magnesium-ferrosilicon as stirring alloy, is an optimal vermicularizing process for obtaining satisfi ed vermicularity. ...

  7. Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ``Genetic Engineering Technology for the Improvement of the Sterile Insect Technique`` highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits. Refs, figs, tabs.

  8. Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-01-01

    Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ''Genetic Engineering Technology for the Improvement of the Sterile Insect Technique'' highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits

  9. Reverse engineering smart card malware using side channel analysis with machine learning techniques

    CSIR Research Space (South Africa)

    Djonon Tsague, Hippolyte

    2016-12-01

    Full Text Available as much variance of the original data as possible. Among feature extraction techniques, PCA and LDA are very common dimensionality reduction algorithms that have successfully been applied in many classification problems like face recognition, character...

  10. FY71 Engineering Report on Surveillance Techniques for Civil Aviation Security

    Science.gov (United States)

    1971-11-01

    This document discusses the work performed by the TSC task group on surveillance techniques in FY71. The principal section is devoted to the technical description, classification and evaluation of commercial metal detectors for concealed weapons. It ...

  11. A general purpose diagnostic technique for marine diesel engines - Application on the main propulsion and auxiliary diesel units of a marine vessel

    International Nuclear Information System (INIS)

    Lamaris, V.T.; Hountalas, D.T.

    2010-01-01

    Diesel engines are widely used in marine applications (i.e. propulsion and auxiliaries) except from a few cases where gas or steam turbines are used. This is the result of their high efficiency, power concentration and reliability compared to other compatible or alternative power sources. The proper and efficient operation of the engines (main engine and diesel generator units) in marine applications is critical, and therefore techniques or systems that determine engine current condition and detect potential faults are extremely important. Furthermore, it is advantageous when such techniques can be applied on different engine configurations and provide reliable results, because on a vessel usually exist diesel engines of different type, i.e. the main propulsion unit is a large low-speed two-stroke diesel engine while the diesel generators are four-stroke medium or high speed engines. In the present work is described and evaluated for the first time the application of an improved diagnostic technique, developed by the authors, on both the main engine and the auxiliary units of a commercial marine vessel. The diagnostic technique is based on a thermodynamic simulation model. The simulation model embedded in the technique has been modified, namely an existing two-zone model is replaced by a multi-zone one. With this modification it is avoided model constant tuning with the operating conditions. This is extremely important for the diagnostic philosophy of the proposed technique. Using data from engine shop tests, the simulation model is calibrated (i.e. model constants are determined) and the engine reference condition is obtained. The simulation model is then used to estimate the current engine condition, using field measurements (i.e. cylinder pressure measurements, periphery data, etc.). From the results it is revealed that the diagnosis method provides detailed information for the operating condition of both engines and the values of parameters that cannot be

  12. The effects of restaurant nutrition menu labelling on college students' healthy eating behaviours.

    Science.gov (United States)

    Roseman, Mary G; Joung, Hyun-Woo; Choi, Eun-Kyong Cindy; Kim, Hak-Seon

    2017-04-01

    According to the US Affordable Care Act, restaurant chains are required to provide energy (calorie) and other nutrition information on their menu. The current study examined the impact of menu labelling containing calorie information and recommended daily calorie intake, along with subjective nutrition knowledge, on intention to select lower-calorie foods prior to the implementation of the Affordable Care Act. Full factorial experimental design with participants exposed to four variants of a sample menu in a 2 (presence v. absence of calorie information) ×2 (presence v. absence of recommended daily calorie intake). Large, public university in the Southwest USA. Primarily undergraduate college students. Majority of participants were 19-23 years of age (mean 21·8 (sd 3·6) years). Menu information about calorie content and respondents' subjective nutrition knowledge had a significantly positive impact on students' intention to select lower-calorie foods (β=0·24, Prestaurant menus as a way to easily and expediently obtain nutrition information.

  13. Eating Well While Dining Out: Collaborating with Local Restaurants to Promote Heart Healthy Menu Items

    Science.gov (United States)

    Thayer, Linden M.; Pimentel, Daniela C.; Smith, Janice C.; Garcia, Beverly A.; Sylvester, Laura Lee; Kelly, Tammy; Johnston, Larry F.; Ammerman, Alice S.; Keyserling, Thomas C.

    2017-01-01

    Background: Because Americans commonly consume restaurant foods with poor dietary quality, effective interventions are needed to improve food choices at restaurants. Purpose: The purpose of this study was to design and evaluate a restaurant-based intervention to help customers select and restaurants promote heart healthy menu items with healthful…

  14. Eating Well While Dining Out: Collaborating with Local Restaurants to Promote Heart Healthy Menu Items

    Science.gov (United States)

    Thayer, Linden M.; Pimentel, Daniela C.; Smith, Janice C.; Garcia, Beverly A.; Lee Sylvester, Laura; Kelly, Tammy; Johnston, Larry F.; Ammerman, Alice S.; Keyserling, Thomas C.

    2017-01-01

    Background As Americans commonly consume restaurant foods with poor dietary quality, effective interventions are needed to improve food choices at restaurants. Purpose To design and evaluate a restaurant-based intervention to help customers select and restaurants promote heart healthy menu items with healthful fats and high quality carbohydrates. Methods The intervention included table tents outlining 10 heart healthy eating tips, coupons promoting healthy menu items, an information brochure, and link to study website. Pre and post intervention surveys were completed by restaurant managers and customers completed a brief “intercept” survey. Results Managers (n = 10) reported the table tents and coupons were well received, and several noted improved personal nutrition knowledge. Overall, 4214 coupons were distributed with 1244 (30%) redeemed. Of 300 customers surveyed, 126 (42%) noticed the table tents and of these, 115 (91%) considered the nutrition information helpful, 42 (33%) indicated the information influenced menu items purchased, and 91 (72%) reported the information will influence what they order in the future. Discussion The intervention was well-received by restaurant managers and positively influenced menu item selection by many customers. Translation to Health Education Practice Further research is needed to assess effective strategies for scaling up and sustaining this intervention approach. PMID:28947925

  15. Surveying Libraries to Identify Best Practices for a Menu Approach for Library Instruction Requests

    Directory of Open Access Journals (Sweden)

    Candice Benjes-Small

    2009-11-01

    Full Text Available A challenging situation has developed in regards to library instruction. With increases in both the quantity of information and the variety of information technologies being made available to researchers, the information literacy landscape is getting more complex. Simultaneously, the time allotted for library instruction is remaining essentially the same. In order to market the breadth of content available for library instruction sessions and to promote collaboration between librarians and teaching faculty in order to create optimal instruction sessions an 'a la carte menu' approach to library instruction requests was adopted by Radford University in 2004. Since the late 1990s a number of community colleges and universities have included some type of menu in their instruction request forms or documentation and the authors desired to understand what approach these institutions had taken and whether they were effective in marketing instruction and improving communication between library instructors and teaching faculty. They analyzed forty-seven adaptations of the menu available on the web and surveyed the librarians who created them. In this article the authors present the findings of the web analysis and the survey, and recommendations are given for using the menu approach to library instruction requests.

  16. Production technique of vermicular graphite iron cylinder head of vehicle diesel engine

    Directory of Open Access Journals (Sweden)

    Zhou Gen

    2008-11-01

    Full Text Available The 25 years’production and application have proved that vermicular graphite iron cylinder heads with vermicularity ≥50% satisfy the machinability and performance demand of diesel engine. The method, in which using cupola-induction furnace duplex melting and pour-over process with rare earth-ferrosilicon or rare earthsilicon compound as vermicularizing alloy plus rare earth-magnesium-ferrosilicon as stirring alloy, is an optimal vermicularizing process for obtaining satisfi ed vermicularity. Using top kiss risers, enlarging kissing areas and expanding covering width and making ingates to freeze earlier are the effective measures to eliminate shrinkage, blowhole and oxide inclusions in the vermicular graphite iron cylinder heads.

  17. A Review of the Piezoelectric Electromechanical Impedance Based Structural Health Monitoring Technique for Engineering Structures

    Directory of Open Access Journals (Sweden)

    Wongi S. Na

    2018-04-01

    Full Text Available The birth of smart materials such as piezoelectric (PZT transducers has aided in revolutionizing the field of structural health monitoring (SHM based on non-destructive testing (NDT methods. While a relatively new NDT method known as the electromechanical (EMI technique has been investigated for more than two decades, there are still various problems that must be solved before it is applied to real structures. The technique, which has a significant potential to contribute to the creation of one of the most effective SHM systems, involves the use of a single PZT for exciting and sensing of the host structure. In this paper, studies applied for the past decade related to the EMI technique have been reviewed to understand its trend. In addition, new concepts and ideas proposed by various authors are also surveyed, and the paper concludes with a discussion of the potential directions for future works.

  18. Tracer-based laser-induced fluorescence measurement technique for quantitative fuel/air-ratio measurements in a hydrogen internal combustion engine.

    Science.gov (United States)

    Blotevogel, Thomas; Hartmann, Matthias; Rottengruber, Hermann; Leipertz, Alfred

    2008-12-10

    A measurement technique for the quantitative investigation of mixture formation processes in hydrogen internal combustion engines (ICEs) has been developed using tracer-based laser-induced fluorescence (TLIF). This technique can be employed to fired and motored engine operation. The quantitative TLIF fuel/air-ratio results have been verified by means of linear Raman scattering measurements. Exemplary results of the simultaneous investigation of mixture formation and combustion obtained at an optical accessible hydrogen ICE are shown.

  19. New Techniques for Deep Learning with Geospatial Data using TensorFlow, Earth Engine, and Google Cloud Platform

    Science.gov (United States)

    Hancher, M.

    2017-12-01

    Recent years have seen promising results from many research teams applying deep learning techniques to geospatial data processing. In that same timeframe, TensorFlow has emerged as the most popular framework for deep learning in general, and Google has assembled petabytes of Earth observation data from a wide variety of sources and made them available in analysis-ready form in the cloud through Google Earth Engine. Nevertheless, developing and applying deep learning to geospatial data at scale has been somewhat cumbersome to date. We present a new set of tools and techniques that simplify this process. Our approach combines the strengths of several underlying tools: TensorFlow for its expressive deep learning framework; Earth Engine for data management, preprocessing, postprocessing, and visualization; and other tools in Google Cloud Platform to train TensorFlow models at scale, perform additional custom parallel data processing, and drive the entire process from a single familiar Python development environment. These tools can be used to easily apply standard deep neural networks, convolutional neural networks, and other custom model architectures to a variety of geospatial data structures. We discuss our experiences applying these and related tools to a range of machine learning problems, including classic problems like cloud detection, building detection, land cover classification, as well as more novel problems like illegal fishing detection. Our improved tools will make it easier for geospatial data scientists to apply modern deep learning techniques to their own problems, and will also make it easier for machine learning researchers to advance the state of the art of those techniques.

  20. Execution techniques for high level radioactive waste disposal. 4. Design and manufacturing procedure of engineered barriers

    International Nuclear Information System (INIS)

    Ogata, Nobuhide; Kosaki, Akio; Ueda, Hiroyoshi; Asano, Hidekazu; Takao, Hajime

    1999-01-01

    Ensuring the physical integrity of engineered barriers for an extremely long time period is necessary for geological disposal of high-level radioactive wastes. This report describes the design process and the designed configurations of both overpack and buffer as engineered barriers. Manufacturing procedure, quality control and inspection methods are also summarized. Carbon steel was selected as a structural material of the overpack and the specification of the overpack was determined assuming disposal in the depths of 1000 m below surface of crystalline rock site. The mixture of bentonite and sand (80% sodium bentonite and 20% silica sand by mass) was selected as material for a buffer from mainly its permeability and characteristics of self-sealing of a gap occurred in construction work. Welding method of a lid onto the main body of the overpack, uniting method of a corrosion-resistance layer and the structural component in the case of a composite overpack and manufacturing procedures of both blocks-type and monolithic-type buffers are also investigated. (author)

  1. influence des engins et techniques de peche sur l'abondance

    African Journals Online (AJOL)

    ACSS

    17 févr. 2017 ... calculated using XLSTAT Software. Ordinary kriging technique in ArcGis 9.3 Software was used to map the measured ... Further studies are needed to develop a plan for sustainable management of the fisheries ...... sustainability in the Lake Victoria basin: an ... Management of large Rivers for Fisheries,.

  2. Restaurant menu labelling: Is it worth adding sodium to the label?

    Science.gov (United States)

    Scourboutakos, Mary J; Corey, Paul N; Mendoza, Julio; Henson, Spencer J; L'Abbe, Mary R

    2014-07-31

    Several provincial and federal bills have recommended various forms of menu labelling that would require information beyond just calories; however, the additional benefit of including sodium information is unknown. The objective of this study was to determine whether sodium information on menus helps consumers make lower-sodium choices and to understand what other factors influence the effect of menu labelling on consumers' meal choices. A total of 3,080 Canadian consumers completed an online survey that included a repeated measures experiment in which consumers were asked to select what they would typically order from four mock-restaurant menus. Subsequently, consumers were randomly allocated to see one of three menu-labelling treatments (calories; calories and sodium; or calories, sodium and serving size) and were given the option to change their order. There was a significant difference in the proportion of consumers who changed their order, varying from 17% to 30%, depending on the restaurant type. After participants had seen menu labelling, sodium levels decreased in all treatments (p<0.0001). However, in three of the four restaurant types, consumers who saw calorie and sodium information ordered meals with significantly less sodium than consumers who saw only calorie information (p<0.01). Consumers who saw sodium labelling decreased the sodium level of their meal by an average of 171-384 mg, depending on the restaurant. In the subset of consumers who saw sodium information and chose to change their order, sodium levels decreased by an average of 681-1,360 mg, depending on the restaurant. Sex, intent to lose weight and the amount of calories ordered at baseline were the most important predictors of who used menu labelling. Eighty percent of survey panelists wanted to see nutrition information when dining out. Including sodium information alongside calorie information may result in a larger decrease in the amount of sodium ordered by restaurant-goers.

  3. Dictionary of combustion engineering and heating engineering. Pt. 1. Woerterbuch der Feuerungs- und Heizungstechnik. T. 1. - Encyclopedie de la technique de combustion et de chauffage. Pt. 1

    Energy Technology Data Exchange (ETDEWEB)

    Katz, M

    1984-01-01

    The dictionary lists technical terms of the fields of combustion engineering and heating engineering. The heating engineering part was kept as short as possible; only those terms are listed, that are directly or indirectly related to combustion engineering. Contents: Definitions, standard nomenclature, burner systems, treatment systems, burner components, dictionary, SI-units, drawings with translations. 26 figs.

  4. A review of optimization techniques used in the design of fibre composite structures for civil engineering applications

    International Nuclear Information System (INIS)

    Awad, Ziad K.; Aravinthan, Thiru; Zhuge, Yan; Gonzalez, Felipe

    2012-01-01

    Highlights: → We reviewed existing optimization techniques of fibre composite structures. → Proposed an improved methodology for design optimization. → Comparison showed the MRDO is most suitable. -- Abstract: Fibre composite structures have become the most attractive candidate for civil engineering applications. Fibre reinforced plastic polymer (FRP) composite materials have been used in the rehabilitation and replacement of the old degrading traditional structures or build new structures. However, the lack of design standards for civil infrastructure limits their structural applications. The majority of the existing applications have been designed based on the research and guidelines provided by the fibre composite manufacturers or based on the designer's experience. It has been a tendency that the final structure is generally over-designed. This paper provides a review on the available studies related to the design optimization of fibre composite structures used in civil engineering such as; plate, beam, box beam, sandwich panel, bridge girder, and bridge deck. Various optimization methods are presented and compared. In addition, the importance of using the appropriate optimization technique is discussed. An improved methodology, which considering experimental testing, numerical modelling, and design constrains, is proposed in the paper for design optimization of composite structures.

  5. Development of Innovative Radioactive Isotope Production Techniques at the Pennsylvania State University Radiation Science and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Johnsen, Amanda M. [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Heidrich, Brenden [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Durrant, Chad [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Bascom, Andrew [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Unlu, Kenan [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center

    2013-08-15

    The Penn State Breazeale Nuclear Reactor (PSBR) at the Radiation Science and Engineering Center (RSEC) has produced radioisotopes for research and commercial purposes since 1956. With the rebirth of the radiochemistry education and research program at the RSEC, the Center stands poised to produce a variety of radioisotopes for research and industrial work that is in line with the mission of the DOE Office of Science, Office of Nuclear Physics, Isotope Development and Production Research and Application Program. The RSEC received funding from the Office of Science in 2010 to improve production techniques and develop new capabilities. Under this program, we improved our existing techniques to provide four radioisotopes (Mn-56, Br-82, Na-24, and Ar-41) to researchers and industry in a safe and efficient manner. The RSEC is also working to develop new innovative techniques to provide isotopes in short supply to researchers and others in the scientific community, specifically Cu-64 and Cu-67. Improving our existing radioisotopes production techniques and investigating new and innovative methods are two of the main initiatives of the radiochemistry research program at the RSEC.

  6. Application of system safety engineering techniques for hazard prevention at the Superconducting Super Collider

    International Nuclear Information System (INIS)

    Hendrix, B.L.

    1991-01-01

    A primary goal of the Superconducting Super Collider Laboratory (SSCL) is to establish an exemplary safety program. Achieving this goal requires leadership, planning, coordination, and technical know-how. To ensure that safety is an inherent part of the design, the Environment, Safety and Health Office employs a systems engineering discipline and process known as System Safety. The goal of System Safety - hazard prevention - is accomplished by analyzing systems to identify hazards and to evaluate design and procedural options and countermeasures to prevent, eliminate, mitigate, or control hazards and risks. Establishment of safety and human factors design criteria at the outset of the project prevents unsafe designs and safety violations, reduces risks, and helps in avoiding costly design changes later. This process requires a considerable amount of coordination with a variety of technical disciplines and safety professionals to integrate methods of hazard prevention, mitigation, and risk reduction throughout the system life-cycle

  7. About | College of Engineering & Applied Science

    Science.gov (United States)

    ; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to Degree Completion Program Graduate Programs Master of Science Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on

  8. Engineer Ethics

    International Nuclear Information System (INIS)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-01

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  9. Genes on the menu: facts for knowledge-based decisions

    National Research Council Canada - National Science Library

    Pechan, Paul; Vries, Gert E. de

    2005-01-01

    ... our fundamental knowledge of plants. The knowledge allowed us, in turn, to make much better decisions about which plants to choose and cross with each other in order to introduce useful agronomic traits into new plant varieties. At first, we were just glad to have these useful techniques: suddenly new and elegant possibilities appeared ma...

  10. Fabrication of silk fibroin film using centrifugal casting technique for corneal tissue engineering.

    Science.gov (United States)

    Lee, Min Chae; Kim, Dong-Kyu; Lee, Ok Joo; Kim, Jung-Ho; Ju, Hyung Woo; Lee, Jung Min; Moon, Bo Mi; Park, Hyun Jung; Kim, Dong Wook; Kim, Su Hyeon; Park, Chan Hum

    2016-04-01

    Films prepared from silk fibroin have shown potential as biomaterials in tissue engineering applications for the eye. Here, we present a novel process for fabrication of silk fibroin films for corneal application. In this work, fabrication of silk fibroin films was simply achieved by centrifugal force. In contrast to the conventional dry casting method, we carried out the new process in a centrifuge with a rotating speed of 4000 rpm, where centrifugal force was imposed on an aluminum tube containing silk fibroin solution. In the present study, we also compared the surface roughness, mechanical properties, transparency, and cell proliferation between centrifugal and dry casting method. In terms of surface morphology, films fabricated by the centrifugal casting have less surface roughness than those by the dry casting. For elasticity and transparency, silk fibroin films obtained from the centrifugal casting had favorable results compared with those prepared by dry casting. Furthermore, primary human corneal keratocytes grew better in films prepared by the centrifugal casting. Therefore, our results suggest that this new fabrication process for silk fibroin films offers important potential benefits for corneal tissue regeneration. © 2015 Wiley Periodicals, Inc.

  11. Characterization of Airborne Particles Collected from Car Engine Air Filters Using SEM and EDX Techniques

    Science.gov (United States)

    Heredia Rivera, Birmania; Gerardo Rodriguez, Martín

    2016-01-01

    Particulate matter accumulated on car engine air-filters (CAFs) was examined in order to investigate the potential use of these devices as efficient samplers for collecting street level air that people are exposed to. The morphology, microstructure, and chemical composition of a variety of particles were studied using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The particulate matter accumulated by the CAFs was studied in two categories; the first was of removed particles by friction, and the second consisted of particles retained on the filters. Larger particles with a diameter of 74–10 µm were observed in the first category. In the second one, the detected particles had a diameter between 16 and 0.7 µm. These particles exhibited different morphologies and composition, indicating mostly a soil origin. The elemental composition revealed the presence of three groups: mineral (clay and asphalt), metallic (mainly Fe), and biological particles (vegetal and animal debris). The palynological analysis showed the presence of pollen grains associated with urban plants. These results suggest that CAFs capture a mixture of atmospheric particles, which can be analyzed in order to monitor urban air. Thus, the continuous availability of large numbers of filters and the retroactivity associated to the car routes suggest that these CAFs are very useful for studying the high traffic zones within a city. PMID:27706087

  12. Engineering the bioelectrochemical interface using functional nanomaterials and microchip technique toward sensitive and portable electrochemical biosensors.

    Science.gov (United States)

    Jia, Xiaofang; Dong, Shaojun; Wang, Erkang

    2016-02-15

    Electrochemical biosensors have played active roles at the forefront of bioanalysis because they have the potential to achieve sensitive, specific and low-cost detection of biomolecules and many others. Engineering the electrochemical sensing interface with functional nanomaterials leads to novel electrochemical biosensors with improved performances in terms of sensitivity, selectivity, stability and simplicity. Functional nanomaterials possess good conductivity, catalytic activity, biocompatibility and high surface area. Coupled with bio-recognition elements, these features can amplify signal transduction and biorecognition events, resulting in highly sensitive biosensing. Additionally, microfluidic electrochemical biosensors have attracted considerable attention on account of their miniature, portable and low-cost systems as well as high fabrication throughput and ease of scaleup. For example, electrochemical enzymetic biosensors and aptamer biosensors (aptasensors) based on the integrated microchip can be used for portable point-of-care diagnostics and environmental monitoring. This review is a summary of our recent progress in the field of electrochemical biosensors, including aptasensors, cytosensors, enzymatic biosensors and self-powered biosensors based on biofuel cells. We presented the advantages that functional nanomaterials and microfluidic chip technology bring to the electrochemical biosensors, together with future prospects and possible challenges. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Transformation techniques for metabolic engineering of diatoms and haptophytes: current state and prospects.

    Science.gov (United States)

    Velmurugan, Natarajan; Deka, Deepi

    2018-05-01

    Diatoms and haptophytes represent a key segment of the dominant phytoplankton communities that frequently form massive blooms in the photic zone of the ocean and are considered indicators of global climate changes. Diatoms and haptophytes also play a vital role in the biological carbon fixation in the carbon cycles. Carbon partitioning within diatoms and haptophytes possesses a wide range of chemical compounds and storage materials, such as lipids, carbohydrates, and chlorophyll. Among the marine microorganisms, diatoms and haptophytes have been recognized as promising sources of long- and very long-chain polyunsaturated fatty acids (PUFA). So far, a variety of approaches have been employed for genetic modification in the nuclei of diatoms and haptophytes. Studies on transformation and metabolic engineering in various intracellular genomes, such as chloroplast and mitochondria, are scarce. Particle bombardment, Agrobacterium and PEG-mediated gene transfer, and electroporation have been reported for foreign gene transformation into the diatoms and haptophytes. Antibiotics (G418 and chloramphenicol) and herbicides (zeocin, hygromycin, and norflurazon) have been successfully demonstrated as the best selection markers. Despite the availability of a wide range of molecular tools for foreign gene expression in microalgae, very few promoters (lhcf1, nr, h4, ef2, fcp, and pds) have been reported for diatoms and haptophytes. Therefore, in this review, we first summarize the significant progress that has been achieved in transgene expression in diatoms and haptophytes and highlight the importance and availability of recently developed novel tools that are suitable for transgenic expression in diatoms and haptophytes.

  14. Characterization of Airborne Particles Collected from Car Engine Air Filters Using SEM and EDX Techniques

    Directory of Open Access Journals (Sweden)

    Birmania Heredia Rivera

    2016-10-01

    Full Text Available Particulate matter accumulated on car engine air-filters (CAFs was examined in order to investigate the potential use of these devices as efficient samplers for collecting street level air that people are exposed to. The morphology, microstructure, and chemical composition of a variety of particles were studied using scanning electron microscopy (SEM and energy-dispersive X-ray (EDX. The particulate matter accumulated by the CAFs was studied in two categories; the first was of removed particles by friction, and the second consisted of particles retained on the filters. Larger particles with a diameter of 74–10 µm were observed in the first category. In the second one, the detected particles had a diameter between 16 and 0.7 µm. These particles exhibited different morphologies and composition, indicating mostly a soil origin. The elemental composition revealed the presence of three groups: mineral (clay and asphalt, metallic (mainly Fe, and biological particles (vegetal and animal debris. The palynological analysis showed the presence of pollen grains associated with urban plants. These results suggest that CAFs capture a mixture of atmospheric particles, which can be analyzed in order to monitor urban air. Thus, the continuous availability of large numbers of filters and the retroactivity associated to the car routes suggest that these CAFs are very useful for studying the high traffic zones within a city.

  15. Application of powder metallurgy technique to produce improved bearing elements for cryogenic aerospace engine turbopumps

    Science.gov (United States)

    Moxson, V. S.; Moracz, D. J.; Bhat, B. N.; Dolan, F. J.; Thom, R.

    1987-01-01

    Traditionally, vacuum melted 440C stainless steel is used for high performance bearings for aerospace cryogenic systems where corrosion due to condensation is a major concern. For the Space Shuttle Main Engine (SSME), however, 440C performance in the high-pressure turbopumps has been marginal. A basic assumption of this study was that powder metallurgy, rather than cast/wrought, processing would provide the finest, most homogeneous bearing alloy structure. Preliminary testing of P/M alloys (hardness, corrosion resistance, wear resistance, fatigue resistance, and fracture toughness) was used to 'de-select' alloys which did perform as well as baseline 440C. Five out of eleven candidate materials (14-4/6V, X-405, MRC-2001, T-440V, and D-5) based on preliminary screening were selected for the actual rolling-sliding five-ball testing. The results of this test were compared with high-performance vacuum-melted M50 bearing steel. The results of the testing indicated outstanding performance of two P/M alloys, X-405 and MRC-2001, which eventually will be further evaluated by full-scale bearing testing.

  16. Menu-engineering in restaurants - adapting portion sizes on plates to enhance vegetable consumption

    NARCIS (Netherlands)

    Reinders, Machiel J.; Huitink, Marlijn; Dijkstra, S.C.; Maaskant, Anna J.; Heijnen, Joris

    2017-01-01

    Background: The aim of this research was to investigate whether increased portion sizes of vegetables and decreased portion sizes of meat on main dishes increased the amount of vegetables consumed in a real-life restaurant setting without affecting customer satisfaction. The participants were

  17. PENTINGNYA PERANAN SKILL DAN MENU KNOWLEDGE WAITER/WAITERS TERHADAP KEPUASAN PELANGGAN DI FOOD AND BEVERAGE SERVICE DEPARTEMENT

    Directory of Open Access Journals (Sweden)

    Fitria Earlike AS

    2016-11-01

    Full Text Available The Background of this research from the topic is the lack of waiter/ waitress�s skills and menu knowledge when doing the food and beverage services. The purpose of this research is to know the importance of waiter /waitress�s skills and menu knowledge toward guest satisfaction. Method of the research was descriptive qualitative which was collected data by using interview, observation, documentation, quitionare and study of literature. The rusult shows that guests� satisfaction are decreased and proved by the respondents quitionare result which shows that the guests are not satified with the waiter/ waitress skills and menu knowledge.

  18. Does a grill menu redesign influence sales, nutrients purchased, and consumer acceptance in a worksite cafeteria?

    Science.gov (United States)

    Vadiveloo, Maya K; Malik, Vasanti S; Spiegelman, Donna; Willett, Walter C; Mattei, Josiemer

    2017-12-01

    Worksite cafeterias are compelling venues to improve diet quality through environmental changes. We conducted a pre-post study to evaluate how a cafeteria-initiated grill menu redesign influenced sales, revenue, and nutrient content of foods purchased. Secondly, we evaluated consumer opinions about menu changes to inform practices for worksite environment interventions. Monthly sales data (2012-2015) were used to compute gross sales and revenue of entrées and side dishes pre-post menu changes. Alternative protein sources replaced red meat; nutrient composition and nutrients purchased were compared using Food Pro software. Consumer responses were queried using online surveys; open-ended responses were analyzed using NVivo. Differences in sales and nutrient content pre-post menu redesign were tested with Wilcoxon Rank Sum tests. Gross sales of entrées (61 vs. 222 servings/month; p = 0.01) and side dishes (120 vs. 365 servings/month; p = 0.001) increased more than three-fold post-menu changes. Revenue from entrées (312 vs. 1144 USD/month; p = 0.01) and side dishes (238 vs. 914 USD/month; p = 0.001) also increased; per entrée, consumers purchased significantly more unsaturated fat (5 g), and less saturated fat (3 g) and sodium (100 mg). For side dishes, they purchased fewer calories (48 kcal) and unsaturated fat (2.9 g), but more fiber (1.8 g), and sodium (260 mg). Four themes emerged from consumer responses: the importance of 1) variety, novelty, choice; 2) cost, affordability, value; 3) health; and 4) food quality, taste. Menu redesign can improve nutrient content, while also increasing sales and revenue. Multi-dimensional assessment of the nutritional, consumer, and retailer implications is desirable practice for enacting similar environmental changes.

  19. Introduction of Functional Structures in Nano-Scales into Engineering Polymer Films Using Radiation Technique

    Energy Technology Data Exchange (ETDEWEB)

    Maekawa, Y., E-mail: maekawa.yasunari@jaea.go.jp [Japan Atomic Energy Agency (JAEA), Quantum Beam Science Directorate, High Performance Polymer Group, 1233 Watanuki-Machi, Takasaki, Gunma-ken 370-1292 (Japan)

    2010-07-01

    Introduction of functional regions in nanometer scale in polymeric films using γ-rays, EB, and ion beams are proposed. Two approaches to build nano-scale functional domains in polymer substrates are proposed: 1) Radiation-induced grafting to transfer nano-scale polymer crystalline structures (morphology), acting as a nano-template, to nano-scale graft polymer regions. The obtained polymers with nano structures can be applied to high performance polymer membranes. 2) Fabrication of nanopores and functional domains in engineering plastic films using ion beams, which deposit the energy in very narrow region of polymer films. Hydrophilic grafting polymers are introduced into hydrophobic fluorinated polymers, cross-linked PTFE (cPTFE) and aromatic hydrocarbon polymer, poly(ether ether ketone (PEEK), which is known to have lamella and crystallite in the polymer films. Then, the hierarchical structures of graft domains are analyzed by a small angle neutron scattering (SANS) experiment. From these analyses, the different structures and the different formation of graft domains were observed in fluorinated and hydrocarbon polymer substrates. the grafted domains in the cPTFE film, working as an ion channel, grew as covering the crystallite and the size of domain seems to be similar to that of crystallite. On the other hand, the PEEK-based PEM has a smaller domain size and it seems to grow independently on the crystallites of PEEK substrate. For nano-fabrication of polymer films using heavy ion beams, the energy distribution in radial direction, which is perpendicular to ion trajectory, is mainly concerned. For penumbra, we re-estimated effective radius of penumbra, in which radiation induced grafting took place, for several different ion beams. We observed the different diameters of the ion channels consisting of graft polymers. The channel sizes were quite in good agreement with the effective penumbra which possess the absorption doses more than 1 kGy. (author)

  20. Introduction of Functional Structures in Nano-Scales into Engineering Polymer Films Using Radiation Technique

    International Nuclear Information System (INIS)

    Maekawa, Y.

    2010-01-01

    Introduction of functional regions in nanometer scale in polymeric films using γ-rays, EB, and ion beams are proposed. Two approaches to build nano-scale functional domains in polymer substrates are proposed: 1) Radiation-induced grafting to transfer nano-scale polymer crystalline structures (morphology), acting as a nano-template, to nano-scale graft polymer regions. The obtained polymers with nano structures can be applied to high performance polymer membranes. 2) Fabrication of nanopores and functional domains in engineering plastic films using ion beams, which deposit the energy in very narrow region of polymer films. Hydrophilic grafting polymers are introduced into hydrophobic fluorinated polymers, cross-linked PTFE (cPTFE) and aromatic hydrocarbon polymer, poly(ether ether ketone (PEEK), which is known to have lamella and crystallite in the polymer films. Then, the hierarchical structures of graft domains are analyzed by a small angle neutron scattering (SANS) experiment. From these analyses, the different structures and the different formation of graft domains were observed in fluorinated and hydrocarbon polymer substrates. the grafted domains in the cPTFE film, working as an ion channel, grew as covering the crystallite and the size of domain seems to be similar to that of crystallite. On the other hand, the PEEK-based PEM has a smaller domain size and it seems to grow independently on the crystallites of PEEK substrate. For nano-fabrication of polymer films using heavy ion beams, the energy distribution in radial direction, which is perpendicular to ion trajectory, is mainly concerned. For penumbra, we re-estimated effective radius of penumbra, in which radiation induced grafting took place, for several different ion beams. We observed the different diameters of the ion channels consisting of graft polymers. The channel sizes were quite in good agreement with the effective penumbra which possess the absorption doses more than 1 kGy. (author)

  1. Application of electrochemical plasma techniques in surface engineering of iron based structural materials

    International Nuclear Information System (INIS)

    Coaca, E.; Rusu, O.; Mihalache, M.; Minca, M.; Tacica, M.; Florea, S.; Oncioiu, G.; Andrei, V.

    2013-01-01

    The surface of austenitic stainless steels 304 L and 316 L was modified by various complex surface treatments: - plasma electrolytic carbo-nitriding by means of Plasma electrolytic saturation (PES); the saturation of cathodic surfaces with C, N was performed using suitable electrolytes (aqueous solutions of inorganic acids, appropriate salts containing the desired elements and certain organic compounds); -electrodeposition of Al from ChCl based Ionic Liquid. The coatings obtained in various experimental conditions have been investigated by means of electron spectroscopy, scanning electron microscopy, energy dispersion x-ray spectrometry, electrochemical techniques, and the properties of the thin films have been correlated with the microstructure and the composition of the surface layers which are strongly dependents of the different regimes of diffusion treatments. The preliminary results on Electrochemical Plasma Technology (EPT) treatments demonstrate that we can select the processing parameters for essential improvement of corrosion behaviour in some aggressive medium and high values of microhardness. (authors)

  2. Menu-Driven Solver Of Linear-Programming Problems

    Science.gov (United States)

    Viterna, L. A.; Ferencz, D.

    1992-01-01

    Program assists inexperienced user in formulating linear-programming problems. A Linear Program Solver (ALPS) computer program is full-featured LP analysis program. Solves plain linear-programming problems as well as more-complicated mixed-integer and pure-integer programs. Also contains efficient technique for solution of purely binary linear-programming problems. Written entirely in IBM's APL2/PC software, Version 1.01. Packed program contains licensed material, property of IBM (copyright 1988, all rights reserved).

  3. Realizing parameterless automatic classification of remote sensing imagery using ontology engineering and cyberinfrastructure techniques

    Science.gov (United States)

    Sun, Ziheng; Fang, Hui; Di, Liping; Yue, Peng

    2016-09-01

    It was an untouchable dream for remote sensing experts to realize total automatic image classification without inputting any parameter values. Experts usually spend hours and hours on tuning the input parameters of classification algorithms in order to obtain the best results. With the rapid development of knowledge engineering and cyberinfrastructure, a lot of data processing and knowledge reasoning capabilities become online accessible, shareable and interoperable. Based on these recent improvements, this paper presents an idea of parameterless automatic classification which only requires an image and automatically outputs a labeled vector. No parameters and operations are needed from endpoint consumers. An approach is proposed to realize the idea. It adopts an ontology database to store the experiences of tuning values for classifiers. A sample database is used to record training samples of image segments. Geoprocessing Web services are used as functionality blocks to finish basic classification steps. Workflow technology is involved to turn the overall image classification into a total automatic process. A Web-based prototypical system named PACS (Parameterless Automatic Classification System) is implemented. A number of images are fed into the system for evaluation purposes. The results show that the approach could automatically classify remote sensing images and have a fairly good average accuracy. It is indicated that the classified results will be more accurate if the two databases have higher quality. Once the experiences and samples in the databases are accumulated as many as an expert has, the approach should be able to get the results with similar quality to that a human expert can get. Since the approach is total automatic and parameterless, it can not only relieve remote sensing workers from the heavy and time-consuming parameter tuning work, but also significantly shorten the waiting time for consumers and facilitate them to engage in image

  4. A Solvent-Free Surface Suspension Melt Technique for Making Biodegradable PCL Membrane Scaffolds for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Ratima Suntornnond

    2016-03-01

    Full Text Available In tissue engineering, there is limited availability of a simple, fast and solvent-free process for fabricating micro-porous thin membrane scaffolds. This paper presents the first report of a novel surface suspension melt technique to fabricate a micro-porous thin membrane scaffolds without using any organic solvent. Briefly, a layer of polycaprolactone (PCL particles is directly spread on top of water in the form of a suspension. After that, with the use of heat, the powder layer is transformed into a melted layer, and following cooling, a thin membrane is obtained. Two different sizes of PCL powder particles (100 µm and 500 µm are used. Results show that membranes made from 100 µm powders have lower thickness, smaller pore size, smoother surface, higher value of stiffness but lower ultimate tensile load compared to membranes made from 500 µm powder. C2C12 cell culture results indicate that the membrane supports cell growth and differentiation. Thus, this novel membrane generation method holds great promise for tissue engineering.

  5. A simple measuring technique of surface flow velocity to analyze the behavior of velocity fields in hydraulic engineering applications.

    Science.gov (United States)

    Tellez, Jackson; Gomez, Manuel; Russo, Beniamino; Redondo, Jose M.

    2015-04-01

    An important achievement in hydraulic engineering is the proposal and development of new techniques for the measurement of field velocities in hydraulic problems. The technological advances in digital cameras with high resolution and high speed found in the market, and the advances in digital image processing techniques now provides a tremendous potential to measure and study the behavior of the water surface flows. This technique was applied at the Laboratory of Hydraulics at the Technical University of Catalonia - Barcelona Tech to study the 2D velocity fields in the vicinity of a grate inlet. We used a platform to test grate inlets capacity with dimensions of 5.5 m long and 4 m wide allowing a zone of useful study of 5.5m x 3m, where the width is similar of the urban road lane. The platform allows you to modify the longitudinal slopes from 0% to 10% and transversal slope from 0% to 4%. Flow rates can arrive to 200 l/s. In addition a high resolution camera with 1280 x 1024 pixels resolution with maximum speed of 488 frames per second was used. A novel technique using particle image velocimetry to measure surface flow velocities has been developed and validated with the experimental data from the grate inlets capacity. In this case, the proposed methodology can become a useful tools to understand the velocity fields of the flow approaching the inlet where the traditional measuring equipment have serious problems and limitations. References DigiFlow User Guide. (2012), (June). Russo, B., Gómez, M., & Tellez, J. (2013). Methodology to Estimate the Hydraulic Efficiency of Nontested Continuous Transverse Grates. Journal of Irrigation and Drainage Engineering, 139(10), 864-871. doi:10.1061/(ASCE)IR.1943-4774.0000625 Teresa Vila (1), Jackson Tellez (1), Jesus Maria Sanchez (2), Laura Sotillos (1), Margarita Diez (3, 1), and J., & (1), M. R. (2014). Diffusion in fractal wakes and convective thermoelectric flows. Geophysical Research Abstracts - EGU General Assembly 2014

  6. The use of genetic engineering techniques to improve the lipid composition in meat, milk and fish products: a review.

    Science.gov (United States)

    Świątkiewicz, S; Świątkiewicz, M; Arczewska-Włosek, A; Józefiak, D

    2015-04-01

    The health-promoting properties of dietary long-chain n-3 polyunsaturated fatty acids (n-3 LCPUFAs) for humans are well-known. Products of animal-origin enriched with n-3 LCPUFAs can be a good example of functional food, that is food that besides traditionally understood nutritional value may have a beneficial influence on the metabolism and health of consumers, thus reducing the risk of various lifestyle diseases such as atherosclerosis and coronary artery disease. The traditional method of enriching meat, milk or eggs with n-3 LCPUFA is the manipulation of the composition of animal diets. Huge progress in the development of genetic engineering techniques, for example transgenesis, has enabled the generation of many kinds of genetically modified animals. In recent years, one of the aims of animal transgenesis has been the modification of the lipid composition of meat and milk in order to improve the dietetic value of animal-origin products. This article reviews and discusses the data in the literature concerning studies where techniques of genetic engineering were used to create animal-origin products modified to contain health-promoting lipids. These studies are still at the laboratory stage, but their results have demonstrated that the transgenesis of pigs, cows, goats and fishes can be used in the future as efficient methods of production of healthy animal-origin food of high dietetic value. However, due to high costs and a low level of public acceptance, the introduction of this technology to commercial animal production and markets seems to be a distant prospect.

  7. Design and manufacturing of patient-specific orthodontic appliances by computer-aided engineering techniques.

    Science.gov (United States)

    Barone, Sandro; Neri, Paolo; Paoli, Alessandro; Razionale, Armando Viviano

    2018-01-01

    Orthodontic treatments are usually performed using fixed brackets or removable oral appliances, which are traditionally made from alginate impressions and wax registrations. Among removable devices, eruption guidance appliances are used for early orthodontic treatments in order to intercept and prevent malocclusion problems. Commercially available eruption guidance appliances, however, are symmetric devices produced using a few standard sizes. For this reason, they are not able to meet all the specific patient's needs since the actual dental anatomies present various geometries and asymmetric conditions. In this article, a computer-aided design-based methodology for the design and manufacturing of a patient-specific eruption guidance appliances is presented. The proposed approach is based on the digitalization of several steps of the overall process: from the digital reconstruction of patients' anatomies to the manufacturing of customized appliances. A finite element model has been developed to evaluate the temporomandibular joint disks stress level caused by using symmetric eruption guidance appliances with different teeth misalignment conditions. The developed model can then be used to guide the design of a patient-specific appliance with the aim at reducing the patient discomfort. At this purpose, two different customization levels are proposed in order to face both arches and single tooth misalignment issues. A low-cost manufacturing process, based on an additive manufacturing technique, is finally presented and discussed.

  8. Price setting under cost uncertainty and menu costs - the case of the Danish petrol market

    International Nuclear Information System (INIS)

    Stampe Christensen, M.

    1994-01-01

    This paper derives the optimal pricing policy for a firm facing menu costs and stochastic production cost. The pricing policy is a boundary pricing policy and numerical comparative static analysis shows how exogenous parameters - the drift and variance of the production cost, the discount factor and the menu costs - affect the boundaries. Analyzing daily data for the Danish petrol price illustrates that a boundary pricing policy indeed has been followed for the period 1988-1992, with occasional shifts in both the desired mark-up and more importantly in the width of the bounds. While the theoretical model can say nothing of the shifts in desired mark-up, changes in the width of the bounds are found to be consistent with the implications of the model. (au)

  9. Industrial Structure, Menu Costs and the Non-Neutrality of Money

    DEFF Research Database (Denmark)

    Dixon, Huw David; Hansen, Claus Thustrup

    by perfect competition. The mixed industrial structure implies that there is a misallocation of the input (labour) between sectors. Following a 5% monetary expansion, the menu costs required for price rigidity in the monopolistic sector can be 50 times smaller than in the symmetric case, while the ratio......New Keynesian literature assumes symmetric industrial structure when analysing explanations of monetary non-neutrality. We analyse the impact of modifying this assumption by allowing for a mixed industrial structure; some industries are characterized by monopolistic competition, and others...... of welfare gain to private loss can be as large as 200 times the corresponding symmetric case. This implies that in real world economies, menu costs may be even more significant than previously thought...

  10. Legal and public health considerations affecting the success, reach, and impact of menu-labeling laws.

    Science.gov (United States)

    Pomeranz, Jennifer L; Brownell, Kelly D

    2008-09-01

    Because the rate of consumption of away-from-home meals has increased dramatically, the distinction between requiring nutrition information for packaged but not restaurant products is no longer reasonable. Public health necessitates that nutrition labels must be included with restaurant menus as a strategy to educate consumers and address the escalation of obesity. Menu-labeling laws are being considered at the local, state, and federal levels, but the restaurant industry opposes such action. We discuss the public health rationale and set forth the government's legal authority for the enactment of menu-labeling laws. We further aim to educate the public health community of the potential legal challenges to such laws, and we set forth methods for governments to survive these challenges by drafting laws according to current legal standards.

  11. Psychology of computer use: IX. A menu of self-administered microcomputer-based neurotoxicology tests

    Science.gov (United States)

    Kennedy, R. S.; Baltzley, D. R.; Wilkes, R. L.; Kuntz, L. A.

    1989-01-01

    This study examined the feasibility of repeated self-administration of a newly developed battery of mental acuity tests which may have application in screening for fitness-for-duty or for persons who may be exposed to environmental stress, toxic agents, or disease. 16 subjects self-administered 18 microcomputer-based tests (13 new, 5 "core"), without proctors, over 10 sessions. The hardware performed well throughout the study and the tests appeared to be easily self-administered. Stabilities and reliabilities of the tests from the "core" battery were comparable to those obtained previously under more controlled experimental conditions. Eight of the new tests exceeded minimum criteria for metric and practical requirements and can be recommended as additions to the menu. Although the average retest reliability was high, cross-correlations between tests were low, implying factorial diversity. The menu can be used to form batteries with flexible total testing time which are likely to tap different mental processes and functions.

  12. Calorie estimation accuracy and menu labeling perceptions among individuals with and without binge eating and/or purging disorders.

    Science.gov (United States)

    Roberto, Christina A; Haynos, Ann F; Schwartz, Marlene B; Brownell, Kelly D; White, Marney A

    2013-09-01

    Menu labeling is a public health policy that requires chain restaurants in the USA to post kilocalorie information on their menus to help consumers make informed choices. However, there is concern that such a policy might promote disordered eating. This web-based study compared individuals with self-reported binge eating disorder (N = 52), bulimia nervosa (N = 25), and purging disorder (N = 17) and those without eating disorders (No ED) (N = 277) on restaurant calorie information knowledge and perceptions of menu labeling legislation. On average, people answered 1.46 ± 1.08 questions correctly (out of 6) (25%) on a calorie information quiz and 92% of the sample was in favor of menu labeling. The findings did not differ based on eating disorder, dieting, or weight status, or race/ethnicity. The results indicated that people have difficulty estimating the calories in restaurant meals and individuals with and without eating disorders are largely in favor of menu labeling laws.

  13. Menu labeling perception and health behaviors among immigrant and US born minority populations: assessment in two Los Angeles public markets.

    Science.gov (United States)

    Vargas-Bustamante, Arturo

    2013-01-01

    To analyze menu labeling perception and food choices/health behaviors in two Los Angeles public markets. Labels with food caloric content were displayed in the food court of one of these markets. Bivarate means analyses compared the surveyed population by market and by nativity status. The main predictors of menu-labeling influence were identified in the sample from the market that displayed labels. A separate analysis investigated food choices/health behaviors among immigrant cohorts by time of US residence. Reading labels when shopping was one of the main predictors associated with menu labeling influence. Longer-stayed immigrants were more likely to afford "balanced meals", but they were also more likely to eat in fast food restaurants and less likely to engage into moderate/intense physical activity. While nativity was not a significant predictor of menu labeling influence on food choices, our findings suggest food choices/behaviors convergence among immigrant and US-born populations.

  14. Determination of the ecological connectivity between landscape patches obtained using the knowledge engineer (expert) classification technique

    Science.gov (United States)

    Selim, Serdar; Sonmez, Namik Kemal; Onur, Isin; Coslu, Mesut

    2017-10-01

    Connection of similar landscape patches with ecological corridors supports habitat quality of these patches, increases urban ecological quality, and constitutes an important living and expansion area for wild life. Furthermore, habitat connectivity provided by urban green areas is supporting biodiversity in urban areas. In this study, possible ecological connections between landscape patches, which were achieved by using Expert classification technique and modeled with probabilistic connection index. Firstly, the reflection responses of plants to various bands are used as data in hypotheses. One of the important features of this method is being able to use more than one image at the same time in the formation of the hypothesis. For this reason, before starting the application of the Expert classification, the base images are prepared. In addition to the main image, the hypothesis conditions were also created for each class with the NDVI image which is commonly used in the vegetation researches. Besides, the results of the previously conducted supervised classification were taken into account. We applied this classification method by using the raster imagery with user-defined variables. Hereupon, to provide ecological connections of the tree cover which was achieved from the classification, we used Probabilistic Connection (PC) index. The probabilistic connection model which is used for landscape planning and conservation studies via detecting and prioritization critical areas for ecological connection characterizes the possibility of direct connection between habitats. As a result we obtained over % 90 total accuracy in accuracy assessment analysis. We provided ecological connections with PC index and we created inter-connected green spaces system. Thus, we offered and implicated green infrastructure system model takes place in the agenda of recent years.

  15. Trends in Nutrient Content of Children's Menu Items in U.S. Chain Restaurants.

    Science.gov (United States)

    Moran, Alyssa J; Block, Jason P; Goshev, Simo G; Bleich, Sara N; Roberto, Christina A

    2017-03-01

    Restaurant food is widely consumed by children and is associated with poor diet quality. Although many restaurants have made voluntary commitments to improve the nutritional quality of children's menus, it is unclear whether this has led to meaningful changes. Nutrients in children's menu items (n=4,016) from 45 chain restaurants were extracted from the nutrition information database MenuStat. Bootstrapped mixed linear models estimated changes in mean calories, saturated fat, and sodium in children's menu items between 2012 and 2013, 2014, and 2015. Changes in nutrient content of these items over time were compared among restaurants participating in the Kids LiveWell initiative and non-participating restaurants. Types of available children's beverages were also examined. Data were analyzed in 2016. There was a significant increase in mean beverage calories from 2012 to 2013 (6, 95% CI=0.8, 10.6) and from 2012 to 2014 (11, 95% CI=3.7, 18.3), but no change between 2012 and 2015, and no differences in nutrient content of other items over time. Restaurants participating in Kids LiveWell reduced entrée calories between 2012 and 2013 (-24, 95% CI= -40.4, -7.2) and between 2012 and 2014 (-40, 95% CI= -68.1, -11.4) and increased side dish calories between 2012 and 2015 (49, 95% CI=4.6, 92.7) versus non-participating restaurants. Sugar-sweetened beverages consistently constituted 80% of children's beverages, with soda declining and flavored milks increasing between 2012 and 2015. Results suggest little progress toward improving nutrition in children's menu items. Efforts are needed to engage restaurants in offering healthful children's meals. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  16. Customer responses to mandatory menu labeling at full-service restaurants.

    Science.gov (United States)

    Auchincloss, Amy H; Mallya, Giridhar G; Leonberg, Beth L; Ricchezza, Andrew; Glanz, Karen; Schwarz, Donald F

    2013-12-01

    In 2010, Philadelphia enacted a menu-labeling law requiring full-service restaurant chains to list values for calories, sodium, fat, and carbohydrates for each item on all printed menus. The goal of the study was to determine whether purchase decisions at full-service restaurants varied depending on the presence of labeling. In August 2011, this cross-sectional study collected 648 customer surveys and transaction receipts at seven restaurant outlets of one large full-service restaurant chain. Two outlets had menu labeling (case sites); five outlets did not (control sites). Outcomes included differences in calories and nutrients purchased and customers' reported use of nutrition information when ordering. Data were analyzed in 2012. Mean age was 37 years; 60% were female; 50% were black/African-American and reported incomes ≥$60,000. Customers purchased food with approximately 1600 kcal (food plus beverage, 1800 kcal); 3200 mg sodium; and 35 g saturated fat. After adjustment for confounders, customers at labeled restaurants purchased food with 151 fewer kilocalories (95% CI=-270, -33); 224 mg less sodium (95% CI=-457, +8); and 3.7 g less saturated fat (95% CI=-7.4, -0.1) compared to customers at unlabeled restaurants (or 155 less kilocalories from food plus beverage, 95% CI=-284, -27). Those reporting that nutrition information affected their order purchased 400 fewer food calories, 370 mg less sodium, and 10 g less saturated fat. Mandatory menu labeling was associated with better food choices among a segment of the public dining at full-service restaurants. Consumer education on the availability and use of nutrition information may extend the impact of menu labeling. © 2013 American Journal of Preventive Medicine Published by American Journal of Preventive Medicine All rights reserved.

  17. DietPal: A Web-Based Dietary Menu-Generating and Management System

    OpenAIRE

    Noah, Shahrul A; Abdullah, Siti Norulhuda; Shahar, Suzana; Abdul-Hamid, Helmi; Khairudin, Nurkahirizan; Yusoff, Mohamed; Ghazali, Rafidah; Mohd-Yusoff, Nooraini; Shafii, Nik Shanita; Abdul-Manaf, Zaharah

    2004-01-01

    Background Attempts in current health care practice to make health care more accessible, effective, and efficient through the use of information technology could include implementation of computer-based dietary menu generation. While several of such systems already exist, their focus is mainly to assist healthy individuals calculate their calorie intake and to help monitor the selection of menus based upon a prespecified calorie value. Although these prove to be helpful in some ways, they are...

  18. Trends in Nutrient Content of Children's Menu Items in U.S. Chain Restaurants

    Science.gov (United States)

    Moran, Alyssa J.; Block, Jason P.; Goshev, Simo G.; Bleich, Sara N.; Roberto, Christina A.

    2017-01-01

    Introduction Restaurant food is widely consumed by children and is associated with poor diet quality. Although many restaurants have made voluntary commitments to improve the nutritional quality of children's menus, it is unclear whether this has led to meaningful changes. Methods Nutrients in children's menu items (n=4,016) from 45 chain restaurants were extracted from the nutrition information database MenuStat. Bootstrapped mixed linear models estimated changes in mean calories, saturated fat, and sodium in children's menu items between 2012 and 2013, 2014, and 2015. Changes in nutrient content of these items over time were compared among restaurants participating in the Kids LiveWell initiative and non-participating restaurants. Types of available children's beverages were also examined. Data were analyzed in 2016. Results There was a significant increase in mean beverage calories from 2012 to 2013 (6, 95% CI=0.8, 10.6) and from 2012 to 2014 (11, 95% CI=3.7, 18.3), but no change between 2012 and 2015, and no differences in nutrient content of other items over time. Restaurants participating in Kids LiveWell reduced entrée calories between 2012 and 2013 (−24, 95% CI= −40.4, −7.2) and between 2012 and 2014 (−40, 95% CI= −68.1, −11.4) and increased side dish calories between 2012 and 2015 (49, 95% CI=4.6, 92.7) versus non-participating restaurants. Sugar-sweetened beverages consistently constituted 80% of children's beverages, with soda declining and flavored milks increasing between 2012 and 2015. Conclusions Results suggest little progress toward improving nutrition in children's menu items. Efforts are needed to engage restaurants in offering healthful children's meals. PMID:28089130

  19. Calorie menu labeling on quick-service restaurant menus: an updated systematic review of the literature.

    Science.gov (United States)

    Swartz, Jonas J; Braxton, Danielle; Viera, Anthony J

    2011-12-08

    Nutrition labels are one strategy being used to combat the increasing prevalence of overweight and obesity in the United States. The Patient Protection and Affordable Care Act of 2010 mandates that calorie labels be added to menu boards of chain restaurants with 20 or more locations. This systematic review includes seven studies published since the last review on the topic in 2008. Authors searched for peer-reviewed studies using PUBMED and Google Scholar. Included studies used an experimental or quasi-experimental design comparing a calorie-labeled menu with a no-calorie menu and were conducted in laboratories, college cafeterias, and fast food restaurants. Two of the included studies were judged to be of good quality, and five of were judged to be of fair quality. Observational studies conducted in cities after implementation of calorie labeling were imprecise in their measure of the isolated effects of calorie labels. Experimental studies conducted in laboratory settings were difficult to generalize to real world behavior. Only two of the seven studies reported a statistically significant reduction in calories purchased among consumers using calorie-labeled menus. The current evidence suggests that calorie labeling does not have the intended effect of decreasing calorie purchasing or consumption.

  20. (Not) Eating for the environment: The impact of restaurant menu design on vegetarian food choice.

    Science.gov (United States)

    Bacon, Linda; Krpan, Dario

    2018-06-01

    Previous research has shown that restaurant menu design can influence food choices. However, it remains unknown whether such contextual effects on food selection are dependent on people's past behavior. In the present study, we focused on vegetarian food choices, given their important implications for the environment, and investigated whether the influence of different restaurant menus on the likelihood of selecting a vegetarian dish is moderated by the number of days on which people reported eating only vegetarian food during the previous week. In an online scenario, participants were randomly assigned to four different restaurant menu conditions-control (all dishes presented in the same manner), recommendation (vegetarian dish presented as chef's recommendation), descriptive (more appealing description of vegetarian dish), and vegetarian (vegetarian dishes placed in a separate section)-and ordered a dish for dinner. The results showed that the recommendation and descriptive menus increased the likelihood of vegetarian dish choices for infrequent eaters of vegetarian foods, whereas these effects tended to reverse for those who ate vegetarian meals more often. The vegetarian menu had no impact on the infrequent vegetarian eaters' choice but backfired for the frequent vegetarian eaters and made them less likely to order a vegetarian dish. These findings indicate that people's past behavior is an important determinant of the impact of nudging on food choices, and that achieving sustainable eating may require more personalized interventions. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Evaluating the healthiness of chain-restaurant menu items using crowdsourcing: a new method.

    Science.gov (United States)

    Lesser, Lenard I; Wu, Leslie; Matthiessen, Timothy B; Luft, Harold S

    2017-01-01

    To develop a technology-based method for evaluating the nutritional quality of chain-restaurant menus to increase the efficiency and lower the cost of large-scale data analysis of food items. Using a Modified Nutrient Profiling Index (MNPI), we assessed chain-restaurant items from the MenuStat database with a process involving three steps: (i) testing 'extreme' scores; (ii) crowdsourcing to analyse fruit, nut and vegetable (FNV) amounts; and (iii) analysis of the ambiguous items by a registered dietitian. In applying the approach to assess 22 422 foods, only 3566 could not be scored automatically based on MenuStat data and required further evaluation to determine healthiness. Items for which there was low agreement between trusted crowd workers, or where the FNV amount was estimated to be >40 %, were sent to a registered dietitian. Crowdsourcing was able to evaluate 3199, leaving only 367 to be reviewed by the registered dietitian. Overall, 7 % of items were categorized as healthy. The healthiest category was soups (26 % healthy), while desserts were the least healthy (2 % healthy). An algorithm incorporating crowdsourcing and a dietitian can quickly and efficiently analyse restaurant menus, allowing public health researchers to analyse the healthiness of menu items.

  2. Menu labeling as a potential strategy for combating the obesity epidemic: a health impact assessment.

    Science.gov (United States)

    Kuo, Tony; Jarosz, Christopher J; Simon, Paul; Fielding, Jonathan E

    2009-09-01

    We conducted a health impact assessment to quantify the potential impact of a state menu-labeling law on population weight gain in Los Angeles County, California. We utilized published and unpublished data to model consumer response to point-of-purchase calorie postings at large chain restaurants in Los Angeles County. We conducted sensitivity analyses to account for uncertainty in consumer response and in the total annual revenue, market share, and average meal price of large chain restaurants in the county. Assuming that 10% of the restaurant patrons would order reduced-calorie meals in response to calorie postings, resulting in an average reduction of 100 calories per meal, we estimated that menu labeling would avert 40.6% of the 6.75 million pound average annual weight gain in the county population aged 5 years and older. Substantially larger impacts would be realized if higher percentages of patrons ordered reduced-calorie meals or if average per-meal calorie reductions increased. Our findings suggest that mandated menu labeling could have a sizable salutary impact on the obesity epidemic, even with only modest changes in consumer behavior.

  3. Mandatory menu labeling in one fast-food chain in King County, Washington.

    Science.gov (United States)

    Finkelstein, Eric A; Strombotne, Kiersten L; Chan, Nadine L; Krieger, James

    2011-02-01

    As part of a comprehensive effort to stem the rise in obesity, King County, Washington, enforced a mandatory menu-labeling regulation requiring all restaurant chains with 15 or more locations to disclose calorie information at the point of purchase beginning in January 2009. The purpose of this study is to quantify the impact of the King County regulation on transactions and purchasing behavior at one Mexican fast-food chain with locations within and adjacent to King County. To examine the effect of the King County regulation, a difference-in-difference approach was used to compare total transactions and average calories per transaction between seven King County restaurants and seven control locations focusing on two time periods: one period immediately following the law until the posting of drive-through menu boards (January 2009 to July 2009) and a second period following the drive-through postings (August 2009 through January 2010). Analyses were conducted in 2010. No impact of the regulation on purchasing behavior was found. Trends in transactions and calories per transaction did not vary between control and intervention locations after the law was enacted. In this setting, mandatory menu labeling did not promote healthier food-purchasing behavior. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  4. [Secondary school menu in Madrid (Spain): knowledge and adherence to the Spanish National Health System recommendations].

    Science.gov (United States)

    Berradre-Sáenz, Belén; Royo-Bordonada, Miguel Ángel; Bosqued, María José; Moya, María Ángeles; López, Lázaro

    2015-01-01

    To establish the degree of knowledge and adherence to the Spanish National Health System recommendations on nutrition in schools in the Autonomous Community of Madrid. Cross-sectional study of a random sample of 182 secondary schools from Madrid, during 2013-2014 school year. Information on the characteristics of the schools and the knowledge of the recommendations was collected by internet and telephone interviews, as well as a copy of the school menu. The average number of rations per week offered for each food item and the percentage of schools within the recommended range were calculated. The overall adherence was obtained as the mean of food items (0-12) within the range. 65.5% of the schools were unaware of the national recommendations. The supply of rice, pasta, fish, eggs, salad and fruit was lower than recommended, whereas for meat, accompaniment and other desserts was higher. The percentage of schools within the range for each food item varied between 13% and 95%. The mean of overall adherence was 6.3, with no differences depending on whether the menu was prepared or not at schools or there was or not a person in charge of nutrition standards. The degree of adherence to the recommendations was variable, being advised to increase the supply of cereals, eggs, fish, salad and fruit. Programs for dissemination and implementation of the recommendations, leaded by trained professionals, are required to improve the nutritional value of school menu. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

  5. Restaurant menu labeling: impact of nutrition information on entree sales and patron attitudes.

    Science.gov (United States)

    Albright, C L; Flora, J A; Fortmann, S P

    1990-01-01

    This study examined changes in sales of low fat/low cholesterol foods targeted in a restaurant menu labeling program. Sales of labeled items were tracked before and after the program was introduced, and a subsample of patrons were surveyed for information on visibility and comprehension of the menu labels. Two of the four restaurants had significant increases in the sales of targeted foods following labeling. Comparisons between patrons dining in restaurants which had an increase in sales (I--increase restaurants) to those dining in restaurants which had no overall shift in sales (NI--no increase restaurants) revealed no differences in patron awareness or comprehension of the menu labels. There were age and gender differences between I and NI restaurants, with I restaurants having proportionally more males, and a younger clientele. Taste was the primary reason given by patrons for their entree choice, regardless of whether or not it was labeled. In all four restaurants women and older patrons were more aware of the program and more responsive to its recommendations. These findings suggest that environmental strategies may be an effective method of encouraging dietary changes in the general population, but patron characteristics such as age and gender may influence receptivity to this type of intervention. Future studies aimed at developing effective point of purchase education programs should evaluate these patron characteristics and include more powerful behavior change strategies.

  6. Calorie menu labeling on quick-service restaurant menus: an updated systematic review of the literature

    Directory of Open Access Journals (Sweden)

    Swartz Jonas J

    2011-12-01

    Full Text Available Abstract Nutrition labels are one strategy being used to combat the increasing prevalence of overweight and obesity in the United States. The Patient Protection and Affordable Care Act of 2010 mandates that calorie labels be added to menu boards of chain restaurants with 20 or more locations. This systematic review includes seven studies published since the last review on the topic in 2008. Authors searched for peer-reviewed studies using PUBMED and Google Scholar. Included studies used an experimental or quasi-experimental design comparing a calorie-labeled menu with a no-calorie menu and were conducted in laboratories, college cafeterias, and fast food restaurants. Two of the included studies were judged to be of good quality, and five of were judged to be of fair quality. Observational studies conducted in cities after implementation of calorie labeling were imprecise in their measure of the isolated effects of calorie labels. Experimental studies conducted in laboratory settings were difficult to generalize to real world behavior. Only two of the seven studies reported a statistically significant reduction in calories purchased among consumers using calorie-labeled menus. The current evidence suggests that calorie labeling does not have the intended effect of decreasing calorie purchasing or consumption.

  7. A Review Of Nutritional Guidelines And Menu Compositions For School Feeding Programs In 12 Countries.

    Directory of Open Access Journals (Sweden)

    Ruzky eAliyar

    2015-08-01

    Full Text Available Study objectives: To analyze the nutritional guidelines and menu compositions of school meal provision in various different countries.Background: School feeding is the provision of food on-site or to take home, which aims to increase school enrolment, attendance and retention, and exist as a social safety net for households with very low income. Home-grown school feeding (HGSF, additionally, aims to stimulate local economies by providing a source of income for local smallholder farmers. Methods: Literature searches using the Ovid MEDLINE databases, gathered information from in-country stakeholders, and accessed the programme websites of various countries. Nutrient composition of these menus was calculated from nutritional guidelines and menu compositions using a nutrition linear programming tool (NUTVAL.Country comparisons: School feeding aims differ between countries of each income group. The implementation, delivery of service and nutritional content of foods also differ considerably between countries and income groups. In high-income countries, guidelines and standards have been recommended in an attempt to combat rising levels of overweight and obesity, and to model healthier lifestyle habits. In low-income countries there is a gap in terms of guidance on nutrition standards and menu composition.Conclusions: Provision of evidence-based guidance on nutrition standards to middle and low income countries who have recently established or are planning to establish school feeding has the potential to greatly enhance and improve the quality of service and improve the life of millions of children worldwide.

  8. Novel development of carbonate apatite-chitosan scaffolds based on lyophilization technique for bone tissue engineering

    Directory of Open Access Journals (Sweden)

    Maretaningtias Dwi Ariani

    2012-09-01

    Full Text Available Background: The natural biopolymer chitosan (Ch is currently regarded as a candidate for bone tissue engineering. However, Ch is poor for cell adhesion and low bone formation ability. In order to enhance cell adhesion and bone formation ability, combination of Ch with carbonate apatite (CA was developed. Purpose: The aim of this study was to make carbonate apatite-chitosan scaffolds (CAChSs and evaluate its osteoconductivity in terms of cell proliferation. Methods: Chitosan scaffolds (ChSs were made by the following procedure. Twenty-five, 50, 100, 200 and 400 mg Ch was dissolved into 5 ml of 2% acetic acid (CH3COOH, shaked for 15 min and neutralized with 15 ml of 0.1 M sodium hydroxide (NaOH solution. After centrifugation, Ch gel was packed into the molds then frozen at -80°C for 2h and dried in a freeze dry machine for 24h. The sponges were subjected to UV radiation for 2h. To make CA-ChSs, 200 mg Ch was selected. After neutralization, 50 mg of 0.06 M CA were added into the 200 mg Ch gel. The structure of CA-ChSs was observed by scanning electron microscope (SEM. Mouse osteoblast-like cell (MC3T3-E1 proliferation in these scaffolds was investigated at 1, 7, 14 and 21 days. Results: Three dimensional porous structures of CA-ChSs were clearly observed by SEM. Proliferated cell numbers in CA-ChSs was significantly higher than those in ChSs (control at each stage (p<0.05. Conclusion: It can be concluded that newly developed CA-ChSs had three-dimensional interconnected porous structure, good handling property and supporting ability of proliferation of osteoblasts. It is suggested that newly developed CA-ChSs could be considered as a scaffolds material for bone tissue enginearing.Latar belakang: Kitosan yang merupakan biopolimer alami dianggap sebagai salah satu kandidat untuk rekayasa jaringan tulang. Namun, kitosan memiliki kelemahan terhadap adhesi sel dan kurang mampu membentuk tulang yang cukup. Untuk meningkatkan adhesi sel dan kemampuan

  9. The availability and accessibility of nutrition information in fast food outlets in five states post-menu labelling legislation in New South Wales.

    Science.gov (United States)

    Wellard, Lyndal; Havill, Michelle; Hughes, Clare; Watson, Wendy L; Chapman, Kathy

    2015-12-01

    1) Explore the availability and accessibility of fast food energy and nutrient information post-NSW menu labelling legislation in states with and without menu labelling legislation. 2) Determine whether availability and accessibility differed compared with pre-menu labelling legislation in NSW. We visited 210 outlets of the five largest fast food chains in five Australian states to observe the availability and accessibility of energy and nutrient information. Results were compared with 197 outlets surveyed pre-menu labelling. Most outlets (95%) provided energy values, half provided nutrient values and 3% provided information for all menu items. The total amount of information available increased post-NSW menu labelling implementation (473 versus 178 pre-implementation, pFast food chains surveyed had voluntarily introduced menu labelling nationally. However, more nutrient information was available in-store in 2010, showing that fast food chains are able to provide comprehensive nutrition information, yet they have stopped doing so. Menu labelling legislation should compel fast food chains to provide accessible nutrition information including nutrient values in addition to energy for all menu items in-store. Additionally, public education campaigns are needed to ensure customers can use menu labelling. © 2015 Public Health Association of Australia.

  10. Engineering Encounters: Reverse Engineering

    Science.gov (United States)

    McGowan, Veronica Cassone; Ventura, Marcia; Bell, Philip

    2017-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information on how students' everyday experiences can support science learning through engineering design. In this article, the authors outline a reverse-engineering model of instruction and describe one example of how it looked in our fifth-grade…

  11. What's on the menu? A review of the energy and nutritional content of US chain restaurant menus.

    Science.gov (United States)

    Wu, Helen W; Sturm, Roland

    2013-01-01

    The present study aimed to (i) describe the availability of nutrition information in major chain restaurants, (ii) document the energy and nutrient levels of menu items, (iii) evaluate relationships with restaurant characteristics, menu labelling and trans fat laws, and nutrition information accessibility, and (iv) compare energy and nutrient levels against industry-sponsored and government-issued nutrition criteria. Descriptive statistics and multivariate regression analysis of the energy, total fat, saturated fat, trans fat, sodium, carbohydrate and protein levels of 29 531 regular and 1392 children's menu items [corrected]. Energy and nutrition information provided on restaurant websites or upon request, and secondary databases on restaurant characteristics. The top 400 US chain restaurants by sales, based on the 2009 list of the Restaurants & Institutions magazine. Complete nutrition information was reported for 245 (61 %) restaurants. Appetizers had more energy, fat and sodium than all other item types. Children's menu specialty beverages had more fat, saturated fat and carbohydrates than comparable regular menu beverages. The majority of main entrées fell below one-third of the US Department of Agriculture's estimated daily energy needs, but as few as 3 % were also within limits for sodium, fat and saturated fat. Main entrées had significantly more energy, fat and saturated fat in family-style restaurants than in fast-food restaurants. Restaurants that made nutrition information easily accessible on websites had significantly lower energy, fat and sodium contents across menu offerings than those providing information only upon request. The paper provides a comprehensive view of chain restaurant menu nutrition prior to nationwide labelling laws. It offers baseline data to evaluate how restaurants respond after laws are implemented.

  12. ETRAN 1999: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLIII Conference. Vol IV

    International Nuclear Information System (INIS)

    Spasojevic, D.; Smiljanic, M.; Bozic, D.; Stankovic, D.

    1999-01-01

    The XLIII ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 20-22 Sep, 1999. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 19 papers presented in three sessions.

  13. ETRAN 2002: Society for Electronics,Telecommunications, Computers, Automation and Nuclear Engineering. Section for Nuclear Techniques and Technology. Proceedings of the XLVI Conference. Vol IV

    International Nuclear Information System (INIS)

    Milosevic, M.; Jaksic, Z.; Bozic, D.; Potkonjak, V.

    2002-01-01

    The XLVI ETRAN Conference of the Society for Electronic, Telecommunications, Computers, Automation and Nuclear Engineering was held on 4-7 June, 2002. In the Proceedings of the Conference The Commission of the Nuclear Technique and Technology has 14 papers presented in three following sessions: 1. Actual problems in nuclear technologies; 2. Accelerator and reactor systems; and 3. Radiation protection and ionizing radiation uses

  14. Building theories of knowledge translation interventions: Use the entire menu of constructs

    Directory of Open Access Journals (Sweden)

    Brehaut Jamie C

    2012-11-01

    Full Text Available Abstract Background In the ongoing effort to develop and advance the science of knowledge translation (KT, an important question has emerged around how theory should inform the development of KT interventions. Discussion Efforts to employ theory to better understand and improve KT interventions have until recently mostly involved examining whether existing theories can be usefully applied to the KT context in question. In contrast to this general theory application approach, we propose a ‘menu of constructs’ approach, where individual constructs from any number of theories may be used to construct a new theory. By considering the entire menu of available constructs, rather than limiting choice to the broader level of theories, we can leverage knowledge from theories that would never on their own provide a complete picture of a KT intervention, but that nevertheless describe components or mechanisms relevant to it. We can also avoid being forced to adopt every construct from a particular theory in a one-size-fits-all manner, and instead tailor theory application efforts to the specifics of the situation. Using audit and feedback as an example KT intervention strategy, we describe a variety of constructs (two modes of reasoning, cognitive dissonance, feed forward, desirable difficulties and cognitive load, communities of practice, and adaptive expertise from cognitive and educational psychology that make concrete suggestions about ways to improve this class of intervention. Summary The ‘menu of constructs’ notion suggests an approach whereby a wider range of theoretical constructs, including constructs from cognitive theories with scope that makes the immediate application to the new context challenging, may be employed to facilitate development of more effective KT interventions.

  15. Flexible trigger menu implementation on the Global Trigger for the CMS Level-1 trigger upgrade

    Science.gov (United States)

    MATSUSHITA, Takashi; CMS Collaboration

    2017-10-01

    The CMS experiment at the Large Hadron Collider (LHC) has continued to explore physics at the high-energy frontier in 2016. The integrated luminosity delivered by the LHC in 2016 was 41 fb-1 with a peak luminosity of 1.5 × 1034 cm-2s-1 and peak mean pile-up of about 50, all exceeding the initial estimations for 2016. The CMS experiment has upgraded its hardware-based Level-1 trigger system to maintain its performance for new physics searches and precision measurements at high luminosities. The Global Trigger is the final step of the CMS Level-1 trigger and implements a trigger menu, a set of selection requirements applied to the final list of objects from calorimeter and muon triggers, for reducing the 40 MHz collision rate to 100 kHz. The Global Trigger has been upgraded with state-of-the-art FPGA processors on Advanced Mezzanine Cards with optical links running at 10 GHz in a MicroTCA crate. The powerful processing resources of the upgraded system enable implementation of more algorithms at a time than previously possible, allowing CMS to be more flexible in how it handles the available trigger bandwidth. Algorithms for a trigger menu, including topological requirements on multi-objects, can be realised in the Global Trigger using the newly developed trigger menu specification grammar. Analysis-like trigger algorithms can be represented in an intuitive manner and the algorithms are translated to corresponding VHDL code blocks to build a firmware. The grammar can be extended in future as the needs arise. The experience of implementing trigger menus on the upgraded Global Trigger system will be presented.

  16. Using Card-Sorting to Arrange Menu Items on an Academic Library Homepage

    OpenAIRE

    Goodson, Kymberly Anne

    2012-01-01

    Card sorting is one method for obtaining direct user feedback. It consists ofusers imposing their own organization on a set of ideas, andworks well for developing or evaluating website and menu structure. Participants are asked togroup terms or concepts in a way meaningful to them, and may also be asked to name resulting groups. Participants not only provide insight on how to arrange various items, but can also highlight terms that are confusing or ambiguous. In early 2011, the Unive...

  17. Preemption and the obesity epidemic: state and local menu labeling laws and the nutrition labeling and education act.

    Science.gov (United States)

    Rutkow, Lainie; Vernick, Jon S; Hodge, James G; Teret, Stephen P

    2008-01-01

    Obesity is widely recognized as a preventable cause of death and disease. Reducing obesity among adults and children has become a national health goal in the United States. As one approach to the obesity epidemic, public health practitioners and others have asserted the need to provide consumers with information about the foods they eat. Some state and local governments across the United States have introduced menu labeling bills and regulations that require restaurants to post information, such as calorie content, for foods offered on their menus or menu boards. A major dilemma is whether state and local menu labeling laws are preempted by the federal Nutrition Labeling and Education Act (NLEA). While few courts have addressed this issue, ongoing litigation in New York City provides an early glimpse of judicial interpretation in this area. This article explores these preemption issues, arguing that appropriately written and implemented menu labeling laws should not be preempted by the NLEA. We offer guidance for states and localities that wish to develop and implement menu labeling laws.

  18. Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions

    Science.gov (United States)

    2015-12-30

    emissions demonstration . 46 6 Figure 24. T63 engine with extension pipe to direct exhaust outside of the test cell for exhaust sampling with tip...to assess their effectiveness in conditioning turbine engine exhaust for total PM emissions measurements. Both were designed to promote the... effectively control and mitigate PM emissions. Aircraft PM is formed in the engine combustor due to incomplete combustion of fuel, and in the

  19. Office of Research Support | College of Engineering & Applied Science

    Science.gov (United States)

    Professor and Associate Dean for Research College of Engineering and Applied Sciences Director, Center for Academics Admission Student Life Research Schools & Colleges Libraries Athletics Centers & ; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to

  20. A physical and engineering study on the irradiation techniques in neutron capture therapy aiming for wider application

    International Nuclear Information System (INIS)

    Sakurai, Y.; Ono, K.; Suzuki, M.; Katoh, I.; Miyatake, S.-I.; Yanagie, H.

    2003-01-01

    The solo-irradiation of thermal neutrons has been applied for brain cancer and malignant melanoma in the boron neutron capture therapy (BNCT) at the medical irradiation facility of Kyoto University Reactor (KUR), from the first clinical trial in 1974. In 1997, after the facility remodeling, the application of the mix-irradiation of thermal and epi-thermal neutrons was started, and the depth dose distribution for brain cancer has been improved in some degree. In 2001, the solo-irradiation of epi-thermal neutrons also started. It is specially mentioned that the application to oral cancers started at the same time. The BNCT clinical trial using epi-thermal neutron irradiation at KUR, amounts to twelve as of March 2003. The seven trials; more than a half of the total trials, are for oral cancers. From this fact, we think that the wider application to the other cancers is required for the future prosperity of BNCT. The cancers applied for BNCT in KUR at the present time, are brain cancer, melanoma and oral cancers, as mentioned above. The cancers, expected to be applied in near future, are liver cancer, pancreas cancer, lung cancer, tongue cancer, breast cancer, etc.. Any cancer is almost incurable by the other therapy including the other radiation therapy. In the wider application of BNCT to these cancers, the dose-distribution control suitable to each cancer and/or each part, is important. The introduction of multi-directional and/or multi-divisional irradiation is also needed. Here, a physical and engineering study using two-dimensional transport calculation and three-dimensional Monte-Carlo simulation for the irradiation techniques in BNCT aiming for wider application is reported

  1. Studying the impact of different climate engineering techniques on ocean acidification with the Max Planck Institute Earth System Model

    Science.gov (United States)

    Gonzalez, M. F.; Ilyina, T.; Sonntag, S.

    2016-02-01

    In order to counterbalance the consequences of climate change, different climate engineering (CE) technologies have been suggested. Nonetheless, knowledge about their mitigation potential and side-effects remains sparse. Ocean alkalinization (OA) is an ocean-based carbon dioxide removal method, that aims at enhancing the natural process of weathering by which atmospheric CO2 is absorbed and stored in the ocean via chemical sequestration. Large-scale afforestation can also boost the uptake of CO2 by terrestrial biological systems and it is commonly considered as CE method. Stratospheric sulfur injection is a solar radiation management technique that has been proposed in order to enhance the Earth's albedo, mimicking the release of sulfur particles into the atmosphere during volcanic eruptions and the subsequent decrease in surface atmospheric temperatures. We explore the mitigation potential and side-effects of these CE technologies using the Max Planck Institute Earth System Model. Our scenarios are designed in order to test under what conditions it is possible to achieve a climate state that resembles the one of the representative concentration pathway (RCP) 4.5 under RCP8.5 greenhouse gas emissions. Direct and indirect effects of the OA method on the oceanic carbon cycle, differ strongly from those associated with afforestation and stratospheric sulfur injection. This is because they depend upon joint responses and synergies between different elements of the Earth system; thus, effects on the oceanic carbon cycle are not intuitively understood. Changes in the strength of the marine carbon sink, seawater pH and saturation state of carbonate minerals will be discussed. Additionally, collateral changes in marine biota and ocean biogeochemistry will be presented.

  2. Comparison of the nutrient content of children's menu items at US restaurant chains, 2010-2014.

    Science.gov (United States)

    Deierlein, Andrea L; Peat, Kay; Claudio, Luz

    2015-08-15

    To determine changes in the nutritional content of children's menu items at U.S. restaurant chains between 2010 and 2014. The sample consisted of 13 sit down and 16 fast-food restaurant chains ranked within the top 50 US chains in 2009. Nutritional information was accessed in June-July 2010 and 2014. Descriptive statistics were calculated for nutrient content of main dishes and side dishes, as well as for those items that were added, removed, or unchanged during the study period. Nutrient content of main dishes did not change significantly between 2010 and 2014. Approximately one-third of main dishes at fast-food restaurant chains and half of main dishes at sit down restaurant chains exceeded the 2010 Dietary Guidelines for Americans recommended levels for sodium, fat, and saturated fat in 2014. Improvements in nutrient content were observed for side dishes. At sit down restaurant chains, added side dishes contained over 50% less calories, fat, saturated fat, and sodium, and were more likely to contain fruits/vegetables compared to removed sides (p restaurant chains contained less saturated fat (p restaurant industry and policy makers to improve the nutritional content of children's menu items at restaurant chains to align with the Dietary Guidelines for Americans. Additional efforts are necessary to help parents and children make informed choices when ordering at restaurant chains.

  3. The ATLAS Run-2 Trigger: Design, Menu, Performance and Operational Aspects

    CERN Document Server

    Martin, Tim; The ATLAS collaboration

    2016-01-01

    The LHC, at design capacity, has a bunch-crossing rate of 40 MHz whereas the ATLAS experiment at the LHC has an average recording rate of about 1000 Hz. To reduce the rate of events but still maintain a high efficiency of selecting rare events such as physics signals beyond the Standard Model, a two-level trigger system is used in ATLAS. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. Despite the limited time available for processing collision events, the trigger system is able to exploit topological information, as well as using multi-variate methods. In total, the ATLAS trigger system consists of thousands of different individual triggers. The ATLAS trigger menu specifies which triggers are used during data taking and how much rate a given trigger is allocated. This menu reflects not only the physics goals of the collaboration but also takes the instantaneous luminosity of the LHC, the design limits of the ATLAS detector and the o...

  4. The ATLAS Run-2 Trigger Menu for higher luminosities: Design, Performance and Operational Aspects

    CERN Document Server

    Montejo Berlingen, Javier; The ATLAS collaboration

    2017-01-01

    The LHC, at design capacity, has a bunch-crossing rate of 40 MHz whereas the ATLAS experiment has an average recording rate of about 1 kHz. To reduce the rate of events, but maintain high selection efficiency for rare events such as physics signals beyond the Standard Model, a two-level trigger system is used. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. Despite the limited time available for processing collision events the trigger system is able to exploit topological information, as well as using multi-variate methods. In total, the ATLAS trigger systems consists of thousands of different individual triggers. The ATLAS trigger menu specifies which triggers are used during data taking and how much rate a given trigger is allocated. This menu reflects not only the physics goals of the collaboration but also takes into consideration the instantaneous luminosity of the LHC and the design limits of the ATLAS detector and offline pro...

  5. The ATLAS Run-2 Trigger: Design, Menu, Performance and Operational Aspects

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00219584; The ATLAS collaboration

    2016-01-01

    The LHC, at design capacity, has a bunch-crossing rate of 40 MHz whereas the ATLAS experiment has an average recording rate of about 1000 Hz. To reduce the rate of events but still maintain high efficiency of selecting rare events such as physics signals beyond the Standard Model, a two-level trigger system is used in ATLAS. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. Despite the limited time available for processing collision events, the trigger system is able to exploit topological informations, as well as using multi-variate methods. In total, the ATLAS trigger systems consists of thousands of different individual triggers. The ATLAS trigger menu specifies which triggers are used during data taking and how much rate a given trigger is allocated. This menu reflects not only the physics goals of the collaboration but also takes into consideration the instantaneous luminosity of the LHC and the design limits of the ATLAS detecto...

  6. Feasibility of Integrated Menu Recommendation and Self-Order System for Small-Scale Restaurants

    Science.gov (United States)

    Kashima, Tomoko; Matsumoto, Shimpei; Ishii, Hiroaki

    2010-10-01

    In recent years, point of sales (POS) systems with order function have been developed for restaurants. Since expensive apparatus and system are required for installing POS systems, usually only large-scale restaurant chains can afford to introduce them. In this research, we consider the POS management in a restaurant, which cooperates with an automatic order function by using a personal digital device aiming at the safety of the food, pursuit of service, and further operational efficiency improvements, such as foods management, accounting treatment, and ordering work. In traditional POS systems, information recommendation technology is not taken into consideration. We realize the recommendation of a menu according to the user's preference using rough sets and menu planning based on stock status by applying information recommendation technology. Therefore, we believe that this system can be used in comfort with regard to freshness of foods, allergy, diabetes, etc. Furthermore, due to the reduction of the personnel expenses by an operational efficiency improvement such technology becomes even feasible for small-scale stores.

  7. Beam modulation: A novel ToF-technique for high resolution diffraction at the Beamline for European Materials Engineering Research (BEER)

    Science.gov (United States)

    Rouijaa, M.; Kampmann, R.; Šaroun, J.; Fenske, J.; Beran, P.; Müller, M.; Lukáš, P.; Schreyer, A.

    2018-05-01

    The Beamline for European Materials Engineering Research (BEER) is under construction at the European Spallation Source (ESS) in Lund, Sweden. A basic requirement on BEER is to make best use of the long ESS pulse (2.86 ms) for engineering investigations. High-resolution diffraction, however, demands timing resolution up to 0.1% corresponding to a pulse length down to about 70 μs for the case of thermal neutrons (λ ∼ 1.8 Å). Such timing resolution can be achieved by pulse shaping techniques cutting a short section out of the long pulse, and thus paying for resolution by strong loss of intensity. In contrast to this, BEER proposes a novel operation mode called pulse modulation technique based on a new chopper design, which extracts several short pulses out of the long ESS pulse, and hence leads to a remarkable gain of intensity compared to nowadays existing conventional pulse shaping techniques. The potential of the new technique can be used with full advantage for investigating strains and textures of highly symmetric materials. Due to its instrument design and the high brilliance of the ESS pulse, BEER is expected to become the European flagship for engineering research for strain mapping and texture analysis.

  8. Robust fault detection of turbofan engines subject to adaptive controllers via a Total Measurable Fault Information Residual (ToMFIR) technique.

    Science.gov (United States)

    Chen, Wen; Chowdhury, Fahmida N; Djuric, Ana; Yeh, Chih-Ping

    2014-09-01

    This paper provides a new design of robust fault detection for turbofan engines with adaptive controllers. The critical issue is that the adaptive controllers can depress the faulty effects such that the actual system outputs remain the pre-specified values, making it difficult to detect faults/failures. To solve this problem, a Total Measurable Fault Information Residual (ToMFIR) technique with the aid of system transformation is adopted to detect faults in turbofan engines with adaptive controllers. This design is a ToMFIR-redundancy-based robust fault detection. The ToMFIR is first introduced and existing results are also summarized. The Detailed design process of the ToMFIRs is presented and a turbofan engine model is simulated to verify the effectiveness of the proposed ToMFIR-based fault-detection strategy. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

  9. The SE Book: Principles and Techniques of Software Engineering or orAn ABZ of The Theory & Practice of Software Engineering

    DEFF Research Database (Denmark)

    Bjørner, Dines

    ) the TripTych of domain analysis, requirements engineering and software design -- and much much more. It relates all aspects of (12) platform technologies, (13) legal issues of software, (14) quality assurance, and (15) project and product management to the above (1-11 incl.). Highlights of the book series......This ``epos'' emphasises (1) software development from both a formal and an informal approach; (2) the use of mathematics, logic and algebras, as well as discrete mathematics: Sets, Cartesians, lists, functions, maps; (3) property as well as model-oriented specifications; (4) semiotics in the form...... are: (A) Emphasis on design: Literally a thousand development examples are given; and on ``Calculi'' of (B) domain and (C) requirements engineering: Domain facet ``operators'' like: (d.1) Instrinsics, (d.2) support technology, (d.3) management & organisation, (d.4) rules & regulations, (d.5) human...

  10. STEEP STREAMS - Solid Transport Evaluation and Efficiency in Prevention: Sustainable Techniques of Rational Engineering and Advanced MethodS

    Science.gov (United States)

    Armanini, Aronne; Cardoso, Antonio H.; Di Baldassarre, Giuliano; Bellin, Alberto; Breinl, Korbinian; Canelas, Ricardo B.; Larcher, Michele; Majone, Bruno; Matos, Jorges; Meninno, Sabrina; Nucci, Elena; Rigon, Riccardo; Rosatti, Giorgio; Zardi, Dino

    2017-04-01

    The STEEP STREAMS (Solid Transport Evaluation and Efficiency in Prevention: Sustainable Techniques of Rational Engineering and Advanced MethodS) project consists of a collaboration among the Universities of Trento, Uppsala and Lisbon, who joined in a consortium within the ERANET Water JPI call WaterWorks2014. The aim of the project is to produce new rational criteria for the design of protection works against debris flows, a phenomenon consisting in hyper-concentrated flows of water and sediments, classified as catastrophic events typical of small mountainous basins (area triggered by intense rainstorms. Such events are non-stationary phenomena that arise in a very short time, and their recurrence is rather difficult to determine. Compared to flash floods, they are more difficult to anticipate, mostly since they are triggered by convective precipitation events, posing a higher risk of damage and even loss of human lives. These extreme events occur almost annually across Europe, though the formal return period in an exposed site is much larger. Recently, an increase in intensity and frequency of small-scale storm events, leading to extreme solid transport in steep channels, are recognized as one of the effects of climate change. In this context, one of the key challenges of this project is the use of comparatively coarse RCM projections to the small catchments examined in STEEP STREAMS. Given these changes, conventional protection works and their design criteria may not suffice to provide adequate levels of protection to human life and urban settlements. These structures create a storage area upstream the alluvial fans and the settlements, thereby reducing the need of channelization in areas often constrained by urban regulations. To optimize the lamination, and in particular to reduce the peak of solid mass flux, it is necessary that the deposition basin is controlled by a slit check dam, capable of inducing a controlled sedimentation of the solid mas flux. In

  11. An insight on hydrogen fuel injection techniques with SCR system for NO{sub X} reduction in a hydrogen-diesel dual fuel engine

    Energy Technology Data Exchange (ETDEWEB)

    Saravanan, N. [ERC Engines, Hall 11A, Tata Motors, Pimpri, Pune 411019, Maharashtra (India); Nagarajan, G. [Department of Mechanical Engineering, ICE Division, College of Engineering, Guindy, Anna University-Chennai, Chennai 600 025 (India)

    2009-11-15

    Internal combustion engines continue to dominate in many fields like transportation, agriculture and power generation. Among the various alternative fuels, hydrogen is a long-term renewable and less polluting fuel (Produced from renewable energy sources). In the present experimental investigation, the performance and emission characteristics were studied on a direct injection diesel engine in dual fuel mode with hydrogen inducted along with air adopting carburetion, timed port and manifold injection techniques. Results showed that in timed port injection, the specific energy consumption reduces by 15% and smoke level by 18%. The brake thermal efficiency and NO{sub X} increases by 17% and 34% respectively compared to baseline diesel. The variation in performance between port and manifold injection is not significant. The unburnt hydrocarbons and carbon monoxide emissions are lesser in port injection. The oxides of nitrogen are higher in hydrogen operation (both port and manifold injection) compared to diesel engine. In order to reduce the NO{sub X} emissions, a selective catalytic converter was used in hydrogen port fuel injection. The NO{sub X} emission reduced upto a maximum of 74% for ANR (ratio of flow rate of ammonia to the flow rate of NO) of 1.1 with a marginal reduction in efficiency. Selective catalytic reduction technique has been found to be effective in reducing the NO{sub X} emission from hydrogen fueled diesel engines. (author)

  12. Monitoring the changes to the nutrient composition of fast foods following the introduction of menu labelling in New South Wales, Australia: an observational study.

    Science.gov (United States)

    Wellard-Cole, Lyndal; Goldsbury, David; Havill, Michelle; Hughes, Clare; Watson, Wendy L; Dunford, Elizabeth K; Chapman, Kathy

    2018-04-01

    The present study examined the energy (kilojoule) content of Australian fast-food menu items over seven years, before and after introduction of menu board labelling, to determine the impact of the introduction of the legislation. Analysis of the median energy contents per serving and per 100g of fast-food menu items. Change in energy content of menu items across the years surveyed and differences in energy content of standard and limited-time only menu items were analysed. Five of Australia's largest fast food chains: Hungry Jack's, KFC, McDonald's, Oporto and Red Rooster. All standard and limited-time only menu items available at each fast-food chain, collected annually for seven years, 2009-2015. Although some fast-food chains/menu item categories had significant increases in the energy contents of their menus at some time points during the 7-year period, overall there were no significant or systematic decreases in energy following the introduction of menu labelling (P=0·19 by +17 kJ/100 g, P=0·83 by +8 kJ/serving). Limited-time only items were significantly higher in median energy content per 100 g than standard menu items (+74 kJ/100 g, P=0·002). While reformulation across the entire Australian fast-food supply has the potential to positively influence population nutrient intake, the introduction of menu labelling legislation in New South Wales, Australia did not lead to reduced energy contents across the five fast-food chains. To encourage widespread reformulation by the fast-food industry and enhance the impact of labelling legislation, the government should work with industry to set targets for reformulation of nutrient content.

  13. An observational study of consumer use of fast-food restaurant drive-through lanes: implications for menu labelling policy.

    Science.gov (United States)

    Roberto, Christina A; Hoffnagle, Elena; Bragg, Marie A; Brownell, Kelly D

    2010-11-01

    Some versions of restaurant menu labelling legislation do not require energy information to be posted on menus for drive-through lanes. The present study was designed to quantify the number of customers who purchase fast food through drive-in windows as a means of informing legislative labelling efforts. This was an observational study. The study took place at two McDonald's and Burger King restaurants, and single Dairy Queen, Kentucky Fried Chicken, Taco Bell and Wendy's restaurants. The number of customers entering the chain restaurants and purchasing food via the drive-through lane were recorded. A total of 3549 patrons were observed. The percentage of customers who made their purchases at drive-throughs was fifty-seven. The overall average (57 %) is likely a conservative estimate because some fast-food restaurants have late-night hours when only the drive-throughs are open. Since nearly six in ten customers purchase food via the drive-through lanes, menu labelling legislation should mandate the inclusion of menu labels on drive-through menu boards to maximise the impact of this public health intervention.

  14. Predicted Impact of the Food and Drug Administration's Menu-Labeling Regulations on Restaurants in 4 New Jersey Cities.

    Science.gov (United States)

    Gruner, Jessie; DeWeese, Robin S; Lorts, Cori; Yedidia, Michael J; Ohri-Vachaspati, Punam

    2018-02-01

    To determine the proportion of restaurants that will be required to post calorie information under the Food and Drug Administration's menu-labeling regulations in 4 New Jersey cities. We classified geocoded 2014 data on 1753 restaurant outlets in accordance with the Food and Drug Administration's guidelines, which will require restaurants with 20 or more locations nationwide to post calorie information. We used multivariate logistic regression analyses to assess the association between menu-labeling requirements and census tract characteristics. Only 17.6% of restaurants will be affected by menu labeling; restaurants in higher-income tracts have higher odds than do restaurants in lower-income tracts (odds ratio [OR] = 1.55; P = .02). Restaurants in non-Hispanic Black (OR = 1.62; P = .02) and mixed race/ethnicity (OR = 1.44; P = .05) tracts have higher odds than do restaurants in non-Hispanic White tracts of being affected. Additional strategies are needed to help consumers make healthy choices at restaurants not affected by the menu-labeling law. These findings have implications for designing implementation strategies for the law and for evaluating its impact.

  15. 76 FR 30050 - Food Labeling; Nutrition Labeling of Standard Menu Items in Restaurants and Similar Retail Food...

    Science.gov (United States)

    2011-05-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Parts 11 and 101 [Docket No. FDA-2011-F-0172] RIN 0910-AG57 Food Labeling; Nutrition Labeling of Standard Menu Items in Restaurants and Similar Retail Food Establishments; Correction AGENCY: Food and Drug Administration, HHS...

  16. 76 FR 30051 - Food Labeling; Nutrition Labeling of Standard Menu Items in Restaurants and Similar Retail Food...

    Science.gov (United States)

    2011-05-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Parts 11 and 101 [Docket No. FDA-2011-F-0172] RIN 0910-AG57 Food Labeling; Nutrition Labeling of Standard Menu Items in Restaurants and Similar Retail Food Establishments; Extension of Comment Period AGENCY: Food and Drug...

  17. [Modern documentary research on disease menu of acupuncture-moxibustion for mental and behavioral disorder].

    Science.gov (United States)

    Hu, You-Ping; Chen, Yong; Xing, Lin; Niu, Bai-Lu; Zhu, Feng-Juan; Han, Jing; Wang, Yu; Bian, Wei; Liu, Cong-Sheng; Wei, Li; Du, Yuan-Hao

    2011-10-01

    Dominant disease menu of mental and behavioral disorder of acupuncture therapy was summarized and obtained in this article. Literatures on clinical treatment of mental and behavioral disorder with acupuncture were picked up from CBMdisc and CNKI during 1978 to 2007. Types of mental and behavioral disorder and report frequency of each disease treated with acupuncture were counted. And dominant diseases which were favorable to be treated with acupuncture were acquired through analysis and inductive method. Twenty-nine diseases of mental and behavioral disorder are favorable to be treated with acupuncture which were mentioned in totally 1967 related documents. It is found that the number of reports of sleep disorder, depression, hysteria aphronesia, dementia and sexual disorder are ranked as the top five. It is concluded that the preponderant diseases of mental and behavioral disorder treated by acupuncture are dementia, withdrawal syndrome, mental retardation, obsessive-compulsive disorder, sleep disorder, gastrointestinal neurosis (gastrointestinal disorders), depression, alcoholism and globus hystericus.

  18. Promoting the selection of healthy food through menu item description in a family-style restaurant.

    Science.gov (United States)

    Colby, J J; Elder, J P; Peterson, G; Knisley, P M; Carleton, R A

    1987-01-01

    We describe an attempt to influence the selection of menu items in a family-style restaurant. Three different messages, varying in content and emphasis, were used to promote one food special each intervention day. One message emphasized that the specials were particularly healthful, being relatively low in fat, sodium, and cholesterol. A second message stressed flavor and added that the choice was healthful. A third, nonspecific message made no mention of taste or health factors, but simply noted that there was a daily special. Results indicated that restaurant patrons selected healthful specials when the message noted that the choice was healthful but emphasized flavor. Patrons were apparently more open to information about the palatability of the food than its healthfulness per se. These results have implications for point-of-purchase health promotion efforts in general, especially those involving food-labeling programs in restaurants and grocery stores.

  19. A menu-driven program for a computerized spectrophotometry and spectrofluorimetry

    International Nuclear Information System (INIS)

    Zaharia, C.N.; Stoechita, C.

    1993-01-01

    A program in BASIC and assembling language for a spectrophotometer of absorption and emission of fluorescence in UV-visible, with manual operation, interface to a microcomputer, was carried out. The program runs with the modified BASIC interpreter to which there were added the routines in the assembling for the control of the stepping motors, for the A/D and D/A conversions and for the spectrum displaying. The main menu has general controls of the work with the spectrum data files, software facilities for the recording (digital) and the reproducing of the analogue or digital spectrum and controls for the operation of the stepping motors. Some options (functions) need supplementary information such as: names of the files or the work parameters (wavelengths, slew rate) and other options lead to the secondary menus. (Author)

  20. Transportation dose analysis using an interactive menu-driven computer program

    International Nuclear Information System (INIS)

    Strenge, D.L.; Peloquin, R.A.

    1984-10-01

    An easy-to-use software package is described for performing radiological consequence analyses for transportation scenarios involving truck or rail transport of spent fuel, HLW and other radioactive waste forms. The consequence analysis is based on the unit radiological factors (person-rem/km) developed by the Transportation Technology Center (Sandia National Laboratories). These generic unit radiological factors are combined with user-supplied information describing transporation distances, routes and waste types to estimate total exposure of the population. The software was developed for use in preparing the Environmental Assessment for the Monitored Retrievable Storage Program and is suitable for such analyses as siting waste repositories. The key feature of the software is the user-oriented, menu-driven interactive input mode available as an alternative to formatted input. The interactive input option allows the user to supply all input data, edit the data and run the program. Output reports can be diverted to a high-speed printer

  1. [Texture modified diet; digestibility, nutritional value, and contributions to menu of hospitals and nursing homes].

    Science.gov (United States)

    Irles Rocamora, Jose Antonio; García-Luna, Pedro Pablo

    2014-01-21

    Texture modified diet is a significant loss of the organoleptic qualities of the feed, so often associated with suboptimal intake and can increase the risk of malnutrition in people with chewing or swallowing difficulties. It is known that these diets based on traditional ground, have varying nutritional adequacy. The emergence of numerous commercial products lyophilized or ready to eat, with a wide variety of nutritional value, according to the range and recipe is concerned, represent an important step in the normalization of nutritional value and food security in people with dysphagia. This review discussed the possible advantages or disadvantages compared to traditional ground, and the possibilities of inclusion in the menu of hospitals and nursing homes. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  2. Fast-food menu offerings vary in dietary quality, but are consistently poor.

    Science.gov (United States)

    Kirkpatrick, Sharon I; Reedy, Jill; Kahle, Lisa L; Harris, Jennifer L; Ohri-Vachaspati, Punam; Krebs-Smith, Susan M

    2014-04-01

    To evaluate five popular fast-food chains' menus in relation to dietary guidance. Menus posted on chains' websites were coded using the Food and Nutrient Database for Dietary Studies and MyPyramid Equivalents Database to enable Healthy Eating Index-2005 (HEI-2005) scores to be assigned. Dollar or value and kids' menus and sets of items promoted as healthy or nutritious were also assessed. Five popular fast-food chains in the USA. Not applicable. Full menus scored lower than 50 out of 100 possible points on the HEI-2005. Scores for Total Fruit, Whole Grains and Sodium were particularly dismal. Compared with full menus, scores on dollar or value menus were 3 points higher on average, whereas kids' menus scored 10 points higher on average. Three chains marketed subsets of items as healthy or nutritious; these scored 17 points higher on average compared with the full menus. No menu or subset of menu items received a score higher than 72 out of 100 points. The poor quality of fast-food menus is a concern in light of increasing away-from-home eating, aggressive marketing to children and minorities, and the tendency for fast-food restaurants to be located in low-income and minority areas. The addition of fruits, vegetables and legumes; replacement of refined with whole grains; and reformulation of offerings high in sodium, solid fats and added sugars are potential strategies to improve fast-food offerings. The HEI may be a useful metric for ongoing monitoring of fast-food menus.

  3. Function-centered modeling of engineering systems using the goal tree-success tree technique and functional primitives

    International Nuclear Information System (INIS)

    Modarres, Mohammad; Cheon, Se Woo

    1999-01-01

    Most of the complex systems are formed through some hierarchical evolution. Therefore, those systems can be best described through hierarchical frameworks. This paper describes some fundamental attributes of complex physical systems and several hierarchies such as functional, behavioral, goal/condition, and event hierarchies, then presents a function-centered approach to system modeling. Based on the function-centered concept, this paper describes the joint goal tree-success tree (GTST) and the master logic diagram (MLD) as a framework for developing models of complex physical systems. A function-based lexicon for classifying the most common elements of engineering systems for use in the GTST-MLD framework has been proposed. The classification is based on the physical conservation laws that govern the engineering systems. Functional descriptions based on conservation laws provide a simple and rich vocabulary for modeling complex engineering systems

  4. A Technique for Continuous Evaluation of Student Performance in Two Different Domains: Structural Engineering and Computer Information Technology

    Science.gov (United States)

    Desai, Niranjan; Stefanek, George

    2017-01-01

    Student access to the Internet has made it much easier for students to find solutions to traditional homework problems online and thereby has made this traditional assessment method of monitoring student progress and gauging the assimilation of knowledge in engineering and technology courses less reliable. This paper presents an in-class,…

  5. Methods for constructing exact solutions of partial differential equations mathematical and analytical techniques with applications to engineering

    CERN Document Server

    Meleshko, Sergey V

    2005-01-01

    Differential equations, especially nonlinear, present the most effective way for describing complex physical processes. Methods for constructing exact solutions of differential equations play an important role in applied mathematics and mechanics. This book aims to provide scientists, engineers and students with an easy-to-follow, but comprehensive, description of the methods for constructing exact solutions of differential equations.

  6. PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation

    International Nuclear Information System (INIS)

    Sultana, Naznin; Wang Min

    2012-01-01

    Tissue engineering combines living cells with biodegradable materials and/or bioactive components. Composite scaffolds containing biodegradable polymers and nanosized osteoconductive bioceramic with suitable properties are promising for bone tissue regeneration. In this paper, based on blending two biodegradable and biocompatible polymers, namely poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(l-lactic acid) (PLLA) with incorporated nano hydroxyapatite (HA), three-dimensional composite scaffolds with controlled microstructures and an interconnected porous structure, together with high porosity, were fabricated using an emulsion freezing/freeze-drying technique. The influence of various parameters involved in the emulsion freezing/freeze-drying technique was studied for the fabrication of good-quality polymer scaffolds based on PHBV polymers. The morphology, mechanical properties and crystallinity of PHBV/PLLA and HA in PHBV/PLLA composite scaffolds and PHBV polymer scaffolds were studied. The scaffolds were coated with collagen in order to improve wettability. During in vitro biological evaluation study, it was observed that SaOS-2 cells had high attachment on collagen-coated scaffolds. Significant improvement in cell proliferation and alkaline phosphatase activity for HA-incorporated composite scaffolds was observed due to the incorporation of HA. After 3 and 7 days of culture on all scaffolds, SaOS-2 cells also had normal morphology and growth. These results indicated that PHBV/PLLA-based scaffolds fabricated via an emulsion freezing/freeze-drying technique were favorable sites for osteoblastic cells and are promising for the applications of bone tissue engineering.

  7. Low-Cost Manufacturing Technique for Advanced Regenerative Cooling for In-Space Cryogenic Engines, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the proposed effort is to use selective laser melting (SLM, an additive manufacturing technique) to manufacture a hot fire-capable, water-cooled spool...

  8. Low-Cost Manufacturing Technique for Advanced Regenerative Cooling for In-Space Cryogenic Engines, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the proposed effort is to demonstrate feasibility of using selective laser melting (SLM, an emerging manufacturing technique) to manufacture a subscale...

  9. Food and Beverage Selection Patterns among Menu Label Users and Nonusers: Results from a Cross-Sectional Study.

    Science.gov (United States)

    Gruner, Jessie; Ohri-Vachaspati, Punam

    2017-06-01

    By May 5, 2017, restaurants with 20 or more locations nationwide will be required to post calorie information on menus and menu boards. Previous research shows that those who use menu labels purchase fewer calories, but how users are saving calories is unknown. To assess food and beverage selection patterns among menu label users and nonusers. Secondary, cross-sectional analysis using data from a study examining sociodemographic disparities in menu label usage at a national fast-food restaurant chain. Participants were recruited outside restaurant locations, using street-intercept survey methodology. Consenting customers submitted receipts and completed a brief oral survey. Receipt data were used to categorize food and beverage purchases. Side, beverage, and entrée purchases. Sides and beverages were classified as healthier and less-healthy options consistent with the 2015 Dietary Guidelines for Americans. Healthier options contained items promoted in the guidelines, such as whole fruits, vegetables, low-fat dairy, and 100% fruit juice; less-healthy options contained solid fat or added sugar. Entrées were categorized as lower-, medium-, and higher-calorie options, based on quartile cutoffs. Multinomial logistic regression models were used to estimate prevalence ratios (PRs) for purchases among menu label users and nonusers, controlling for sociodemographic characteristics and total price paid. Healthier sides were selected by 7.5% of users vs 2.5% of nonusers; healthier beverages were selected by 34.0% of users vs 11.6% of nonusers; and lowest-calorie entrées were selected by 28.3% of users vs 30.1% of nonusers. Compared with nonusers (n=276), users (n=53) had a higher probability of purchasing healthier sides (PR=5.44; P=0.034), and healthier beverages (PR=3.37; P=0.005). No significant differences were seen in the purchasing patterns of entrées. Targeting educational campaigns to side and beverage purchasing behaviors may increase the effectiveness of menu

  10. The influence of menu labeling on calories selected or consumed: a systematic review and meta-analysis.

    Science.gov (United States)

    Sinclair, Susan E; Cooper, Marcia; Mansfield, Elizabeth D

    2014-09-01

    Recent menu labeling initiatives in North America involve posting the calorie content of standard menu items, sometimes with other nutrients of public health concern, with or without contextual information (such as the recommended daily caloric intake for an average adult) or interpretive information (such as traffic light symbols). It is not clear whether this is an effective method to convey nutrition information to consumers wanting to make more-informed food choices. Of particular concern are those consumers who may be limited in their food and health literacy skills to make informed food choices to meet their dietary needs or goals. The purpose of this systematic review was to determine whether the provision of menu-based nutrition information affects the selection and consumption of calories in restaurants and other foodservice establishments. A secondary objective was to determine whether the format of the nutrition information (informative vs contextual or interpretive) influences calorie selection or consumption. Several bibliographic databases were searched for experimental or quasiexperimental studies that tested the effect of providing nutrition information in a restaurant or other foodservice setting on calories selected or consumed. Studies that recruited generally healthy, noninstitutionalized adolescents or adults were included. When two or more studies reported similar outcomes and sufficient data were available, meta-analysis was performed. Menu labeling with calories alone did not have the intended effect of decreasing calories selected or consumed (-31 kcal [P=0.35] and -13 kcal [P=0.61], respectively). The addition of contextual or interpretive nutrition information on menus appeared to assist consumers in the selection and consumption of fewer calories (-67 kcal [P=0.008] and -81 kcal [P=0.007], respectively). Sex influenced the effect of menu labeling on selection and consumption of calories, with women using the information to select and

  11. Novel technique of source and drain engineering for dual-material double-gate (DMDG) SOI MOSFETS

    Science.gov (United States)

    Yadav, Himanshu; Malviya, Abhishek Kumar; Chauhan, R. K.

    2018-04-01

    The dual-metal dual-gate (DMDG) SOI has been used with Dual Sided Source and Drain Engineered 50nm SOI MOSFET with various high-k gate oxide. It has been scrutinized in this work to enhance its electrical performance. The proposed structure is designed by creating Dual Sided Source and Drain Modification and its characteristics are evaluated on ATLAS device simulator. The consequence of this dual sided assorted doping on source and drain side of the DMDG transistor has better leakage current immunity and heightened ION current with higher ION to IOFF Ratio. Which thereby vesting the proposed device appropriate for low power digital applications.

  12. Techniques of collecting, controling and analyzing information about functioning LAN JINET

    International Nuclear Information System (INIS)

    Mazepa, E.Yu.; Parsadanyan, N.G.; Fariseev, V.Ya.; Modebadze, Z.S.

    1992-01-01

    The brief description of programming capability for controling and analyzing information about functioning LAN JINET is presented. Operating in the menu mode an administrator and engineer of JINET are consider a network temprorary state, tracing map of token and statistic of commands, used by users of the network. 5 refs.; 10 figs

  13. Pre- and after-treatment techniques for diesel engines in inland navigation. Technical report in the framework of EU project CREATING (M06.03, task II)

    Energy Technology Data Exchange (ETDEWEB)

    Van Rens, G.L.M.A. [ECN Biomass, Coal and Environmental Research, Petten (Netherlands); De Wilde, H.P.J. [ECN Policy Studies, Petten (Netherlands)

    2006-03-15

    With emission legislation for trucks getting more and more stringent it can only be expected that emission limits for shipping will be tightened as well. Less emission from shipping can be achieved by better hull-shapes or new propulsion systems, as addressed in other work packages of CREATING. But at this moment tail pipe emissions are legislated, and engine measures or after-treatment techniques need to be used to reduce those emissions. In trucking industry large reductions in pollutant emissions have been achieved by engine modifications at the cost of a not-achieved decrease in fuel consumption. This will be treated in more detail in 'improvement techniques' from sub work package M06.01 Task VI. The goal of this report is to describe pre- and after-treatment techniques, which are already used in industry, diesel powered trucks or ships. Requirements by these specific techniques and cost aspects are treated. Three promising techniques, which are still under development, are discussed as well. Techniques that are treated in detail in this report are, in order of appearance, diesel oxidation catalysts, wet scrubbers, diesel particulate filters, selective catalytic reduction, humidification of engine inlet air and electrostatic precipitation. For those readers, who are unfamiliar with the composition and dangers of emissions it is recommended to read M06.01 Task III 'Environmental and health aspects' as certain background knowledge, especially regarding the composition of particulate matter is assumed. This report will form a basis for M06.03 Task III Retrofit, where, amongst other, the presented techniques will be screened for suitability for retrofit. This report is also a report on itself, which can be used to draw conclusions for the suitability to fit these techniques behind a new engine. Diesel oxidation catalysts are proven on cars and trucks. They require a fuel with sulphur content lower than present 0.2 or future 0.1% sulphur. They

  14. Functional evaluation of artificial skeletal muscle tissue constructs fabricated by a magnetic force-based tissue engineering technique.

    Science.gov (United States)

    Yamamoto, Yasunori; Ito, Akira; Fujita, Hideaki; Nagamori, Eiji; Kawabe, Yoshinori; Kamihira, Masamichi

    2011-01-01

    Skeletal muscle tissue engineering is currently applied in a variety of research fields, including regenerative medicine, drug screening, and bioactuator development, all of which require the fabrication of biomimic and functional skeletal muscle tissues. In the present study, magnetite cationic liposomes were used to magnetically label C2C12 myoblast cells for the construction of three-dimensional artificial skeletal muscle tissues by an applied magnetic force. Skeletal muscle functions, such as biochemical and contractile properties, were evaluated for the artificial tissue constructs. Histological studies revealed that elongated and multinucleated myotubes were observed within the tissue. Expression of muscle-specific markers, such as myogenin, myosin heavy chain and tropomyosin, were detected in the tissue constructs by western blot analysis. Further, creatine kinase activity increased during differentiation. In response to electric pulses, the artificial tissue constructs contracted to generate a physical force (the maximum twitch force, 33.2 μN [1.06 mN/mm2]). Rheobase and chronaxie of the tissue were determined as 4.45 V and 0.72 ms, respectively. These results indicate that the artificial skeletal muscle tissue constructs fabricated in this study were physiologically functional and the data obtained for the evaluation of their functional properties may provide useful information for future skeletal muscle tissue engineering studies.

  15. Development of mechanically expanded gelatin-AAc-PLLA/PLCL nanofibers for vascular tissue engineering by radiation-based techniques

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Jin Oh; Jeong, Sung In; Seo, Da Eun; Park, Jong Seok; Gwon, Hui Jeong; Ahn, Sung Jun; Lim, Youn Mook [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Shin, Young Min [Dept. of Bioengineering, Division of Applied Chemical and Bio Engineering, Hanyang University, Seoul (Korea, Republic of)

    2015-12-15

    Vascular tissue engineering has been accessed to mimic the natural composition of the blood vessel containing inmate, media, and adventitia layers. We fabricated mechanically expanded PLLA/PLCL nanofibers using electrospinning and UTM. The pore size of the meshes was increased the gelatin immobilized AAc-PLLA/PLCL nanofibers (203.30±49.62 microns) than PLLA/PLCL nanofibers (59.99±8.66 microns) after mechanical expansion. To increase the cell adhesion and proliferation, we introduced carboxyl group, and gelatin was conjugated on them. The properties of the PLLA/PLCL nanofibers were analyzed with SEM, ATR-FTIR, TBO staining, and water contact angle measurement, general cell responses on the PLLA/PLCL nanofibers such as adhesion, proliferation, and infiltration were also investigated using smooth muscle cell (SMC). During the SMC culture, the initial viability of the cells was significantly increased on the gelatin immobilized AAc-PLLA/PLCL nanofibers, and infiltration of the cells was also enhanced on them. Therefore, gelatin immobilized AAc-PLLA/PLCL nanofibers and mechanically expanded meshes may be a good tool for vascular tissue engineering application.

  16. History of nuclear power plants safety in France (1945-2000) - Engineer techniques, expert evaluation, topical issue

    International Nuclear Information System (INIS)

    Foasso, Cyrille

    2003-01-01

    This doctoral dissertation relates the history of the mastery of risks in civil nuclear plants in France. Since 1960, it's known as the 'surete nucleaire'. Over a fifty-year period separating the discovery or the atomic fission and its industrial application on a large scale this PhD shows which technical means were used over the years by engineers to handle this risk which is said to be huge. It also studies the various processes in expert evaluation and in decision making elaborated to evaluate if the risk was acceptable or not. Beyond the conflicts between nuclear advocates and opponents, this thesis shows how ever among nuclear engineer the growing distinction between roles (promoters, experts and controlling authorities) and the various jobs (designers, builders and plant operators) triggered different estimations as far as the methods to obtain a satisfactory safety. Thanks to the progress of knowledge through research programs, thanks to the lessons drawn from the functioning or dysfunction of nuclear plants, thanks to the reinforcement of regulations (which more or less reflects the public's opinion concerning this industry) the safety has progressively improved. Thus, this historical study is multiple: a technical history of technology, a history of scientific, industrial and administrative organization, a social history and finally an international and comparative history since the nuclear energy history quickly developed beyond national boundaries. (author) [fr

  17. Theory of stochastic differential equations with jumps and applications mathematical and analytical techniques with applications to engineering

    CERN Document Server

    SITU, Rong

    2005-01-01

    Derivation of Ito's formulas, Girsanov's theorems and martingale representation theorem for stochastic DEs with jumpsApplications to population controlReflecting stochastic DE techniqueApplications to the stock market. (Backward stochastic DE approach)Derivation of Black-Scholes formula for market with and without jumpsNon-linear filtering problems with jumps.

  18. In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Directory of Open Access Journals (Sweden)

    Petra Erdely

    2016-01-01

    Full Text Available Challenging issues concerning energy efficiency and environmental politics require novel approaches to materials design. A recent example with regard to structural materials is the emergence of lightweight intermetallic TiAl alloys. Their excellent high-temperature mechanical properties, low density and high stiffness constitute a profile perfectly suitable for their application as advanced aero-engine turbine blades or as turbocharger turbine wheels in next-generation automotive engines. As the properties of TiAl alloys during processing as well as during service are dependent on the phases occurring, detailed knowledge of their volume fractions and distribution within the microstructure is of paramount importance. Furthermore, the behavior of the individual phases during hot deformation and subsequent heat treatments is of interest to define reliable and cost-effective industrial production processes. In situ high-energy X-ray diffraction methods allow tracing the evolution of phase fractions over a large temperature range. Neutron diffraction unveils information on order-disorder transformations in TiAl alloys. Small-angle scattering experiments offer insights into the materials’ precipitation behavior. This review attempts to shine a light on selected in situ diffraction and scattering techniques and the ways in which they promoted the development of an advanced engineering TiAl alloy.

  19. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  20. The ATLAS Run-2 Trigger Menu for higher luminosities: Design, Performance and Operational Aspects

    CERN Document Server

    Ruiz-Martinez, Aranzazu; The ATLAS collaboration

    2017-01-01

    The ATLAS experiment aims at recording about 1 kHz of physics collisions, starting with an LHC design bunch crossing rate of 40 MHz. To reduce the massive background rate while maintaining a high selection efficiency for rare physics events (such as beyond the Standard Model physics), a two-level trigger system is used. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. The trigger system exploits topological information, as well as multi-variate methods to carry out the necessary physics filtering. In total, the ATLAS online selection consists of thousands of different individual triggers. A trigger menu is a compilation of these triggers which specifies the physics algorithms to be used during data taking and the bandwidth a given trigger is allocated. Trigger menus reflect not only the physics goals of the collaboration for a given run, but also take into consideration the instantaneous luminosity of the LHC and limitations from the...

  1. The ATLAS Run-2 Trigger Menu for higher luminosities: Design, Performance and Operational Aspects

    CERN Document Server

    Torro Pastor, Emma; The ATLAS collaboration

    2018-01-01

    The ATLAS experiment aims at recording about 1 kHz of physics collisions, starting with an LHC design bunch crossing rate of 40 MHz. To reduce the massive background rate while maintaining a high selection efficiency for rare physics events (such as beyond the Standard Model physics), a two-level trigger system is used. Events are selected based on physics signatures such as presence of energetic leptons, photons, jets or large missing energy. The trigger system exploits topological information, as well as multi-variate methods to carry out the necessary physics filtering. In total, the ATLAS online selection consists of thousands of different individual triggers. A trigger menu is a compilation of these triggers which specifies the physics algorithms to be used during data taking and the bandwidth a given trigger is allocated. Trigger menus reflect not only the physics goals of the collaboration for a given run, but also take into consideration the instantaneous luminosity of the LHC and limitations from the...

  2. Associations between a voluntary restaurant menu designation initiative and patron purchasing behavior.

    Science.gov (United States)

    Sosa, Erica T; Biediger-Friedman, Lesli; Banda, Martha

    2014-03-01

    Restaurant initiatives provide an efficient opportunity to impact large numbers of patrons. The purpose of this study is to measure patron purchasing behaviors during the ¡Por Vida! menu designation initiative. This study used a cross-sectional design and survey data to assess 23 restaurants throughout Bexar County and 152 restaurant patrons. The Patron Awareness Questionnaire assessed if patrons noticed the logo; believed nutrition, cost, and taste were important in making purchasing decisions; and purchased a ¡Por Vida! item. Descriptive statistics, Spearman correlations, and logistic regression were used to analyze the data. Most (93.4%) patrons considered taste very important when deciding what to eat. Cost was very important to 63.8% and nutrition was very important to 55.9% of the sample. The strongest predictors of purchasing a ¡Por Vida! item were the patrons' ages being between 18 and 35 years (odds ratio = 1.474; confidence interval = 0.017, 0.812; p designation initiatives can potentially influence patron purchasing behaviors among a segment of the population when the logo is visible.

  3. What menu changes do restaurants make after joining a voluntary restaurant recognition program?

    Science.gov (United States)

    Gase, Lauren N; Kaur, Mandip; Dunning, Lauren; Montes, Christine; Kuo, Tony

    2015-06-01

    Programs that recognize restaurants for offering healthful options have emerged as a popular strategy to address the obesity epidemic; however, program fidelity and business responses to such programs are rarely assessed. This study sought to examine how retail restaurants in Los Angeles County chose to comply with participation criteria required by the Choose Health LA Restaurants initiative in the region; the program recognizes restaurants for offering reduced-size portions and healthy children's meals. Menus of all restaurants that joined within 1 year of program launch (n = 17 restaurant brands) were assessed for changes. Nine of the 17 brands made changes to their menus to meet participation criteria for reduced-size portions while 8 of the 10 restaurant brands that offered children's menus made changes to improve the healthfulness of children's meals. Results of this comparative assessment lend support to restaurant compliance with program criteria and menu improvements, even though they are voluntary, representing an important step toward implementing this strategy in the retail environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. The ATLAS Trigger Menu design for higher luminosities in Run 2

    CERN Document Server

    Torro Pastor, Emma; The ATLAS collaboration

    2018-01-01

    The ATLAS experiment aims at recording about 1 kHz of physics collisions, starting with an LHC design bunch crossing rate of 40 MHz. To reduce the large background rate while maintaining a high selection efficiency for rare physics events (such as beyond the Standard Model physics), a two-level trigger system is used. Events are selected based on physics signatures such as the presence of energetic leptons, photons, jets or large missing energy. The trigger system exploits topological information, as well as multivariate methods to carry out the necessary physics filtering for the many analyses that are pursued by the ATLAS community. In total, the ATLAS online selection consists of nearly two thousand individual triggers. A Trigger Menu is the compilation of these triggers, it specifies the physics selection algorithms to be used during data taking and the rate and bandwidth a given trigger is allocated. Trigger menus must reflect the physics goals of the collaboration for a given run, but also take into con...

  5. Poor nutrition on the menu: children's meals at America's top chain restaurants.

    Science.gov (United States)

    Batada, Ameena; Bruening, Meg; Marchlewicz, Elizabeth H; Story, Mary; Wootan, Margo G

    2012-06-01

    We evaluated the nutritional quality of children's meals at chain restaurants, because children obtain about a third of their daily calories from away-from-home foods and studies show that restaurant foods are often higher in calories and lower in nutritional value than foods prepared at home. We assessed the nutritional quality of children's meals at the 50 largest U.S. restaurant chains by visiting each chain's web site or calling the company. Eighteen of the chains did not have children's meals and 10 did not provide adequate nutrition information to be included in the study. The nutritional quality of each meal combination was evaluated against a set of nutrition standards based on key nutrition recommendations in the Dietary Guidelines for Americans. Of the 22 restaurants that had children's menus and available nutrition information, 99% of 1662 children's meal combinations were of poor nutritional quality. Restaurants should support healthier choices for children by reformulating existing menu items and adding new healthier items, posting calories on menus, and setting nutrition standards for marketing to children.

  6. Method of Menu Selection by Gaze Movement Using AC EOG Signals

    Science.gov (United States)

    Kanoh, Shin'ichiro; Futami, Ryoko; Yoshinobu, Tatsuo; Hoshimiya, Nozomu

    A method to detect the direction and the distance of voluntary eye gaze movement from EOG (electrooculogram) signals was proposed and tested. In this method, AC-amplified vertical and horizontal transient EOG signals were classified into 8-class directions and 2-class distances of voluntary eye gaze movements. A horizontal and a vertical EOGs during eye gaze movement at each sampling time were treated as a two-dimensional vector, and the center of gravity of the sample vectors whose norms were more than 80% of the maximum norm was used as a feature vector to be classified. By the classification using the k-nearest neighbor algorithm, it was shown that the averaged correct detection rates on each subject were 98.9%, 98.7%, 94.4%, respectively. This method can avoid strict EOG-based eye tracking which requires DC amplification of very small signal. It would be useful to develop robust human interfacing systems based on menu selection for severely paralyzed patients.

  7. Flexible trigger menu implementation on the Global Trigger for the CMS Level-1 trigger upgrade

    CERN Document Server

    Matsushita, Takashi

    2017-01-01

    The CMS experiment at the Large Hadron Collider (LHC) has continued to explore physics at the high-energy frontier in 2016. The integrated luminosity delivered by the LHC in 2016 was 41~fb$^{-1}$ with a peak luminosity of 1.5 $\\times$ 10$^{34}$ cm$^{-2}$s$^{-1}$ and peak mean pile-up of about 50, all exceeding the initial estimations for 2016. The CMS experiment has upgraded its hardware-based Level-1 trigger system to maintain its performance for new physics searches and precision measurements at high luminosities. The Global Trigger is the final step of the CMS \\mbox{Level-1} trigger and implements a trigger menu, a set of selection requirements applied to the final list of objects from calorimeter and muon triggers, for reducing the 40 MHz collision rate to 100 kHz. The Global Trigger has been upgraded with state-of-the-art FPGA processors on Advanced Mezzanine Cards with optical links running at 10 GHz in a MicroTCA crate. The powerful processing resources of the upgraded system enable implemen...

  8. Software Engineering and Its Application to Avionics

    Science.gov (United States)

    1988-01-01

    separate packages. These routines should be documented to include purpose, requirements, flowcharts ; emphasis should be placed on details of the interface...user interface should be easy to learn for the beginner (as are menu driven systems) yet it should not slow down the expert. A typical compromise is to...diagrams (DFDs). Other less used techniques were the State Machine approach and Petri Nets. Traditional mathematical flowcharts ae good for

  9. Environmental Intervention in Carryout Restaurants Increases Sales of Healthy Menu Items in a Low-Income Urban Setting.

    Science.gov (United States)

    Lee-Kwan, Seung Hee; Bleich, Sara N; Kim, Hyunju; Colantuoni, Elizabeth; Gittelsohn, Joel

    2015-01-01

    To investigate how a pilot environmental intervention changed food sales patterns in carryout restaurants. Quasi-experimental. Low-income neighborhoods of Baltimore, Maryland. Seven carryouts (three intervention, four comparison). Phase 1, menu board revision and healthy menu labeling; phase 2, increase of healthy sides and beverages; and phase 3, promotion of cheaper and healthier combination meals. Weekly handwritten menu orders collected to assess changes in the proportion of units sold and revenue of healthy items (entrée, sides and beverages, and combined). Logistic and Poisson regression models with generalized estimating equations. In the intervention group, odds for healthy entrée units and odds for healthy side and beverage units sold significantly increased in phases 2 and 3; odds for healthy entrée revenue significantly increased in phase 1 (odds ratio [OR] 1.16, 95% confidence interval [CI] 1.08-1.26), phase 2 (OR 1.32, 95% CI 1.25-1.41), and phase 3 (OR 1.39, 95% CI 1.14-1.70); and odds for healthy side and beverage revenues increased significantly in phase 2 (OR 1.62, 95% CI 1.33-1.97) and phase 3 (OR 2.73, 95% CI 2.15-3.47) compared to baseline. Total revenue in the intervention group was significantly higher in all phases than in the comparison group (p selection, and competitive pricing can increase availability and sales of healthy items in carryouts.

  10. Food labeling; nutrition labeling of standard menu items in restaurants and similar retail food establishments. Final rule.

    Science.gov (United States)

    2014-12-01

    To implement the nutrition labeling provisions of the Patient Protection and Affordable Care Act of 2010 (Affordable Care Act or ACA), the Food and Drug Administration (FDA or we) is requiring disclosure of certain nutrition information for standard menu items in certain restaurants and retail food establishments. The ACA, in part, amended the Federal Food, Drug, and Cosmetic Act (the FD&C Act), among other things, to require restaurants and similar retail food establishments that are part of a chain with 20 or more locations doing business under the same name and offering for sale substantially the same menu items to provide calorie and other nutrition information for standard menu items, including food on display and self-service food. Under provisions of the ACA, restaurants and similar retail food establishments not otherwise covered by the law may elect to become subject to these Federal requirements by registering every other year with FDA. Providing accurate, clear, and consistent nutrition information, including the calorie content of foods, in restaurants and similar retail food establishments will make such nutrition information available to consumers in a direct and accessible manner to enable consumers to make informed and healthful dietary choices.

  11. Biomedical Engineering

    CERN Document Server

    Suh, Sang C; Tanik, Murat M

    2011-01-01

    Biomedical Engineering: Health Care Systems, Technology and Techniques is an edited volume with contributions from world experts. It provides readers with unique contributions related to current research and future healthcare systems. Practitioners and researchers focused on computer science, bioinformatics, engineering and medicine will find this book a valuable reference.

  12. Building technique. Vol. 5. Construction engineering. Pt. 2. Building physics. Bautechnik. Bd. 5. Konstruktiver Ingenieurbau. T. 2. Bauphysik

    Energy Technology Data Exchange (ETDEWEB)

    Cziesielski, E [Technische Univ. Berlin (Germany, F.R.); ed.

    1988-01-01

    This volume on 'Building Technique' gives information on the following subjects: Interaction between building physics and building design (analysis, solutions); thermal protection (heat transfer, thermal protection requirements, energy saving); protection against damp (water economy, water transport, protection against rain); sealing buildings (material, stressing of buildings by humidity of the ground and service water, drainage, sealing); noise insulation (basic terms, sound absorption, acoustic phenomena, noise from domestic equipment, protection against outside noise); fire protection (technical building regulations, fire protection regulations, classes of building material, fire resistance classes, fire behaviour of special building components). The subsequent part of the report is concerned with the history of building design (design and building technique, tasks of the architect, year of birth of modern building design 1743. Prehistory of building design). (HWJ) With 186 figs.

  13. Apical extrusion of intracanal debris using two engine driven and step-back instrumentation techniques: an in-vitro study.

    Science.gov (United States)

    Kustarci, Alper; Akdemir, Neslihan; Siso, Seyda Herguner; Altunbas, Demet

    2008-10-01

    The purpose of this study was to compare in-vitro the amount of debris extruded apically from extracted teeth, using K3, Protaper rotary instruments and manual step-back technique. Forty five human single-rooted mandibular premolar teeth were randomly divided into 3 groups. The teeth in 3 groups were instrumented until reaching the working length with K3, Protaper rotary instruments and K-type stainless steel instruments with manual step-back technique, respectively. Debris extruded from the apical foramen was collected into centrifuge tubes and the amount was determined. The data obtained were analyzed using Kruskal-Wallis one-way analysis of variance and Mann-Whitney U tests, with P=.05 as the level for statistical significance. Statistically significant difference was observed between K3, Protaper and step-back groups in terms of debris extrusion (PStep-back group had the highest mean debris weight, which was significantly different from the K3 and Protaper groups (Pengine-driven Ni-Ti systems extruded significantly less apical debris than step-back technique. However, Protaper rotary instruments extruded significantly more debris than K3 rotary instruments.

  14. Fabricating a pearl/PLGA composite scaffold by the low-temperature deposition manufacturing technique for bone tissue engineering

    International Nuclear Information System (INIS)

    Xu Mingen; Li Yanlei; Suo Hairui; Wang Qiujun; Ge Yakun; Xu Ying; Yan Yongnian; Liu Li

    2010-01-01

    Here we developed a composite scaffold of pearl/poly(lactic-co-glycolic acid) (pearl/PLGA) utilizing the low-temperature deposition manufacturing (LDM). LDM makes it possible to fabricate scaffolds with designed microstructure and macrostructure, while keeping the bioactivity of biomaterials by working at a low temperature. Process optimization was carried out to fabricate a mixture of pearl powder, PLGA and 1,4-dioxane with the designed hierarchical structures, and freeze-dried at a temperature of -40 deg. C. Scaffolds with square and designated bone shape were fabricated by following the 3D model. Marrow stem cells (MSCs) were seeded on the pearl/PLGA scaffold and then cultured in a rotating cell culture system. The adhesion, proliferation and differentiation of MSCs into osteoblasts were determined using scanning electronic microscopy, WST-1 assay, alkaline phosphatase activity assay, immunofluorescence staining and real-time reverse transcription polymerase chain reaction. The results showed that the composite scaffold had high porosity (81.98 ± 3.75%), proper pore size (micropores: <10 μm; macropore: 495 ± 54 μm) and mechanical property (compressive strength: 0.81 ± 0.04 MPa; elastic modulus: 23.14 ± 0.75 MPa). The pearl/PLGA scaffolds exhibited better biocompatibility and osteoconductivity compared with the tricalcium phosphate/PLGA scaffold. All these results indicate that the pearl/PLGA scaffolds fulfill the basic requirements of bone tissue engineering scaffold.

  15. Novel technique for enhancement of diesel fuel: Impact of aqueous alumina nano-fluid on engine's performance and emissions

    Directory of Open Access Journals (Sweden)

    Miqdam Tariq Chaichan

    2017-09-01

    Full Text Available Nanofluids are suspensions of nanoparticles mixed in liquids and show significant enhancement in some thermophysical and combustion properties of the resulting suspension. In this study, the changes in the performance and emissions characteristics of a conventional diesel engine are verified experimentally using the combustion of a mixture of nanofluid (water and Al2O3 and conventional Iraqi diesel fuel. The nano-Al2O3 (51 nm diameter was used in this study; multiple weight ratios of this nanoparticle were mixed with water to form a nanoparticle suspension. The weight fractions used were 1%, 3%, 5%, 7%, and 10%. After that, a fixed volume ratio of the resulting suspension (10% was added to the diesel and completely mixed. The results indicate that the addition of the nano-alumina-water suspension has increased the brake thermal efficiency up to 5.5%, and reduced the relative fuel consumption up to 3.94%, compared to diesel fuel. In the analysis of emitted exhaust emissions, CO, HC, NOx, PM and noise emissions, they were found to be lower than diesel fuel, while CO2 emissions increased.

  16. Development of rapid, continuous calibration techniques and implementation as a prototype system for civil engineering materials evaluation

    International Nuclear Information System (INIS)

    Scott, M. L.; Gagarin, N.; Mekemson, J. R.; Chintakunta, S. R.

    2011-01-01

    Until recently, civil engineering material calibration data could only be obtained from material sample cores or via time consuming, stationary calibration measurements in a limited number of locations. Calibration data are used to determine material propagation velocities of electromagnetic waves in test materials for use in layer thickness measurements and subsurface imaging. Limitations these calibration methods impose have been a significant impediment to broader use of nondestructive evaluation methods such as ground-penetrating radar (GPR). In 2006, a new rapid, continuous calibration approach was designed using simulation software to address these measurement limitations during a Federal Highway Administration (FHWA) research and development effort. This continuous calibration method combines a digitally-synthesized step-frequency (SF)-GPR array and a data collection protocol sequence for the common midpoint (CMP) method. Modeling and laboratory test results for various data collection protocols and materials are presented in this paper. The continuous-CMP concept was finally implemented for FHWA in a prototype demonstration system called the Advanced Pavement Evaluation (APE) system in 2009. Data from the continuous-CMP protocol is processed using a semblance/coherency analysis to determine material propagation velocities. Continuously calibrated pavement thicknesses measured with the APE system in 2009 are presented. This method is efficient, accurate, and cost-effective.

  17. Engineering Encounters: Teaching Educators about Engineering

    Science.gov (United States)

    Tank, Kristina M.; Raman, D. Raj; Lamm, Monica H.; Sundararajan, Sriram; Estapa, Anne

    2017-01-01

    This column presents ideas and techniques to enhance science teaching. This month's issue describes preservice elementary teachers learning engineering principles from engineers. Few elementary teachers have experience with implementing engineering into the classroom. While engineering professional development opportunities for inservice teachers…

  18. [The application of computer aided design and computer aided engineering technique in separation of Pygopagus conjoined twins].

    Science.gov (United States)

    Zhang, Zhi-cheng; Sun, Tian-sheng; Li, Fang; Tang, Guo-lin

    2009-05-19

    To explore the effect of CAD and CAE related technique in separation of Pygopagus Conjoined Twins. CT images of Pygopagus conjoined twins were obtained and reconstructed in three-dimensional by Mimics software. 3D entity model of skin and spine of conjoined twins were made by fast plastic technique and equipment according to 3D data model. The circumference and area of fused and independent dural sac were measured by software of AutoCAD. The entity model is real reflection of skin and spine of Pygopagus. It was used in the procedures of discussion, sham operation, skin flap design and informed consent. In the measure of MRI, the circumference and area of fused dural sac was more than of independent dural sac, that is to say, the defect of dural sac can be repaired by direct suture. The intraoperative finding match with imaging measure results. The application of CAD and CAE in the procedure of preoperative plan have gave big help to successful separation of Pygopagus Conjoined Twins.

  19. Detection, characterization and quantification of inorganic engineered nanomaterials: A review of techniques and methodological approaches for the analysis of complex samples

    Energy Technology Data Exchange (ETDEWEB)

    Laborda, Francisco, E-mail: flaborda@unizar.es; Bolea, Eduardo; Cepriá, Gemma; Gómez, María T.; Jiménez, María S.; Pérez-Arantegui, Josefina; Castillo, Juan R.

    2016-01-21

    The increasing demand of analytical information related to inorganic engineered nanomaterials requires the adaptation of existing techniques and methods, or the development of new ones. The challenge for the analytical sciences has been to consider the nanoparticles as a new sort of analytes, involving both chemical (composition, mass and number concentration) and physical information (e.g. size, shape, aggregation). Moreover, information about the species derived from the nanoparticles themselves and their transformations must also be supplied. Whereas techniques commonly used for nanoparticle characterization, such as light scattering techniques, show serious limitations when applied to complex samples, other well-established techniques, like electron microscopy and atomic spectrometry, can provide useful information in most cases. Furthermore, separation techniques, including flow field flow fractionation, capillary electrophoresis and hydrodynamic chromatography, are moving to the nano domain, mostly hyphenated to inductively coupled plasma mass spectrometry as element specific detector. Emerging techniques based on the detection of single nanoparticles by using ICP-MS, but also coulometry, are in their way to gain a position. Chemical sensors selective to nanoparticles are in their early stages, but they are very promising considering their portability and simplicity. Although the field is in continuous evolution, at this moment it is moving from proofs-of-concept in simple matrices to methods dealing with matrices of higher complexity and relevant analyte concentrations. To achieve this goal, sample preparation methods are essential to manage such complex situations. Apart from size fractionation methods, matrix digestion, extraction and concentration methods capable of preserving the nature of the nanoparticles are being developed. This review presents and discusses the state-of-the-art analytical techniques and sample preparation methods suitable for

  20. Detection, characterization and quantification of inorganic engineered nanomaterials: A review of techniques and methodological approaches for the analysis of complex samples

    International Nuclear Information System (INIS)

    Laborda, Francisco; Bolea, Eduardo; Cepriá, Gemma; Gómez, María T.; Jiménez, María S.; Pérez-Arantegui, Josefina; Castillo, Juan R.

    2016-01-01

    The increasing demand of analytical information related to inorganic engineered nanomaterials requires the adaptation of existing techniques and methods, or the development of new ones. The challenge for the analytical sciences has been to consider the nanoparticles as a new sort of analytes, involving both chemical (composition, mass and number concentration) and physical information (e.g. size, shape, aggregation). Moreover, information about the species derived from the nanoparticles themselves and their transformations must also be supplied. Whereas techniques commonly used for nanoparticle characterization, such as light scattering techniques, show serious limitations when applied to complex samples, other well-established techniques, like electron microscopy and atomic spectrometry, can provide useful information in most cases. Furthermore, separation techniques, including flow field flow fractionation, capillary electrophoresis and hydrodynamic chromatography, are moving to the nano domain, mostly hyphenated to inductively coupled plasma mass spectrometry as element specific detector. Emerging techniques based on the detection of single nanoparticles by using ICP-MS, but also coulometry, are in their way to gain a position. Chemical sensors selective to nanoparticles are in their early stages, but they are very promising considering their portability and simplicity. Although the field is in continuous evolution, at this moment it is moving from proofs-of-concept in simple matrices to methods dealing with matrices of higher complexity and relevant analyte concentrations. To achieve this goal, sample preparation methods are essential to manage such complex situations. Apart from size fractionation methods, matrix digestion, extraction and concentration methods capable of preserving the nature of the nanoparticles are being developed. This review presents and discusses the state-of-the-art analytical techniques and sample preparation methods suitable for

  1. A restaurant-based intervention to promote sales of healthy children's menu items: the Kids' Choice Restaurant Program cluster randomized trial.

    Science.gov (United States)

    Ayala, Guadalupe X; Castro, Iana A; Pickrel, Julie L; Williams, Christine B; Lin, Shih-Fan; Madanat, Hala; Jun, Hee-Jin; Zive, Michelle

    2016-03-10

    Away-from-home eating is an important dietary behavior with implications on diet quality. Thus, it is an important behavior to target to prevent and control childhood obesity and other chronic health conditions. Numerous studies have been conducted to improve children's dietary intake at home, in early care and education, and in schools; however, few studies have sought to modify the restaurant food environment for children. This study adds to this body of research by describing the development and launch of an innovative intervention to promote sales of healthy children's menu items in independent restaurants in Southern California, United States. This is a cluster randomized trial with eight pair-matched restaurants in San Diego, California. Restaurants were randomized to a menu-only versus menu-plus intervention condition. The menu-only intervention condition involves manager/owner collaboration on the addition of pre-determined healthy children's menu items and kitchen manager/owner collaboration to prepare and plate these items and train kitchen staff. The menu-plus intervention condition involves more extensive manager/owner collaboration and kitchen staff training to select, prepare, and plate new healthy children's menu items, and a healthy children's menu campaign that includes marketing materials and server training to promote the items. The primary outcome is sales of healthy children's menu items over an 18-week period. In addition, dining parties consisting of adults with children under 18 years of age are being observed unobtrusively while ordering and then interviewed throughout the 18-week study period to determine the impact of the intervention on ordering behaviors. Manager/owner interviews and restaurant audits provide additional evidence of impact on customers, employees, and the restaurant environment. Our process evaluation assesses dose delivered, dose received, and intervention fidelity. Successful recruitment of the restaurants has been

  2. A restaurant-based intervention to promote sales of healthy children’s menu items: the Kids’ Choice Restaurant Program cluster randomized trial

    Directory of Open Access Journals (Sweden)

    Guadalupe X. Ayala

    2016-03-01

    Full Text Available Abstract Background Away-from-home eating is an important dietary behavior with implications on diet quality. Thus, it is an important behavior to target to prevent and control childhood obesity and other chronic health conditions. Numerous studies have been conducted to improve children’s dietary intake at home, in early care and education, and in schools; however, few studies have sought to modify the restaurant food environment for children. This study adds to this body of research by describing the development and launch of an innovative intervention to promote sales of healthy children’s menu items in independent restaurants in Southern California, United States. Methods This is a cluster randomized trial with eight pair-matched restaurants in San Diego, California. Restaurants were randomized to a menu-only versus menu-plus intervention condition. The menu-only intervention condition involves manager/owner collaboration on the addition of pre-determined healthy children’s menu items and kitchen manager/owner collaboration to prepare and plate these items and train kitchen staff. The menu-plus intervention condition involves more extensive manager/owner collaboration and kitchen staff training to select, prepare, and plate new healthy children’s menu items, and a healthy children’s menu campaign that includes marketing materials and server training to promote the items. The primary outcome is sales of healthy children’s menu items over an 18-week period. In addition, dining parties consisting of adults with children under 18 years of age are being observed unobtrusively while ordering and then interviewed throughout the 18-week study period to determine the impact of the intervention on ordering behaviors. Manager/owner interviews and restaurant audits provide additional evidence of impact on customers, employees, and the restaurant environment. Our process evaluation assesses dose delivered, dose received, and intervention

  3. The Application of Spectral Analysis of Surface Wave (SASW) Method as a New Rock Mass Classification Technique in Engineering Geology

    International Nuclear Information System (INIS)

    Abdul Rahim Samsuddin; Abdul Ghani Rafek; Umar Hamzah; Suharsono; Khairul Anuar Mohd Nayan

    2008-01-01

    Spectral analysis of surface waves (SASW) is a seismic method that uses the dispersive characteristics of Rayleigh waves propagating through layered material to evaluate S-wave velocity profile. The SASW is an in situ non intrusive method for geotechnical site characterization which is cost effective as compared to the conventional drilling method. In this study, a total of 20 stations from 13 sites were selected. A software (WINSASW 2.0) was used for the inversion process to produce S-wave velocity versus depth profiles. These profiles were then separately analyzed in relation to several engineering rock mass geological parameters such as stiffness, rock quality designation (RQD), anisotropy and the excavability properties. The analysis of the SASW data was based on the assumption that the rock mass is an isotropic homogeneous material with various intensity of discontinuity which influenced the velocity of surface wave propagation within the rock mass. Measurement of dynamic soil properties was carried out employing the shear wave velocities and the N values of the Standard Penetration Test (N SPT ) from borehole data. A new linear equation V s = 4.44 N SPT + 213.84 which relates S-wave and N SPT was deduced. An empirical equation is also proposed to calculate Rock Quality Designation (RQD) values based on S-wave velocity derived from SASW and that of ultrasonic tests. The result of this equation was found to be less than 10% in comparison to the RQD obtained from actual borehole data. An isotropic analysis of the rock mass was carried out using S-wave velocities derived from SASW measurements in four directions. The plots of S-wave - ultrasonic velocity ratio versus ultrasonic velocity were used to evaluate the excavability properties of rock mass. Five classes of rock mass excavability curves were finally proposed in relation to easy digging, easy ripping, hard ripping, hydraulic breaking and blasting. (author)

  4. Asia Pacific menu patterns in relation to lipid abnormalities: An Indonesian perspective

    Directory of Open Access Journals (Sweden)

    Walujo Soerjodibroto

    2004-12-01

    Full Text Available Countries in the Asia-Pacific region differ widely with respect to their nutritional intake and nutritional status. The highest daily energy and proportion of fat intakes of the population is shown by the New Zealanders (total energy 3475 Kcals; fat proportion 37.2% or 1293 Kcals, while the lowest is the Siamese (total energy 2288 Kcals; fat proportion 13.1% or 300 Kcals. The Indonesian on the other hand, is at the third from the bottom (total energy 2631 Kcals; proportion of fat is 14.5% or 381.9 Kcals. Animal fat contributes to 29.7% (1033 Kcals of the total daily energy intake of the New Zealanders (total 3475 Kcals, and the mortality rate coronary heart disease (CHD is also the highest (228 per 100,000 populations for men and 173 for women. In contrast, the proportion of animal fat in Indonesian menu is only 1.47% (38.7 Kcals of the total daily energy intake, while the CHD mortality rate is still below 50 per 100,000 for both men and women. Compared to the same values fifteen years before, animal fat intake of the New Zealanders has a decrease of 90%, Australian 88%, Philippines 99%, however the Indonesian on the other hand, has an increase of 157%. In New Zealand and Australia, the proportion of mortality attributed to cardiovascular disease (CVD for men accounts for over 40% of total mortality. Japan however, the proportion mortality rate for CVD is only less than 30% of total mortality. In this level, Japan places itself among less industrialized group such as Malaysia and the Philippines. In the case of cerebrovascular (stroke mortality however, Japan belongs to the highest category group. It seems that apart of high fat intake, stress and possibly also other factors play a major role in the development of stroke. The mean Indonesian total energy intake is 2631 Kcals, consisting of 8.7% protein (228.9 Kcals, 52.2 g, 76.8% carbohydrate (2020 Kcals, 505 g, and 14.5% fat (381.9 Kcals, 42.4 g. Animal fat intake is only 4.3 g/day (38.7 Kcals

  5. Menu-engineering in restaurants - adapting portion sizes on plates to enhance vegetable consumption: a real-life experiment.

    NARCIS (Netherlands)

    Reinders, M.J.; Huitink, M.; Dijkstra, S.C.; Maaskant, A.J.; Heijnen, J.

    2017-01-01

    Background: The aim of this research was to investigate whether increased portion sizes of vegetables and decreased portion sizes of meat on main dishes increased the amount of vegetables consumed in a real-life restaurant setting without affecting customer satisfaction. The participants were

  6. Menu-engineering in restaurants - adapting portion sizes on plates to enhance vegetable consumption: a real-life experiment.

    Science.gov (United States)

    Reinders, Machiel J; Huitink, Marlijn; Dijkstra, S Coosje; Maaskant, Anna J; Heijnen, Joris

    2017-12-25

    The aim of this research was to investigate whether increased portion sizes of vegetables and decreased portion sizes of meat on main dishes increased the amount of vegetables consumed in a real-life restaurant setting without affecting customer satisfaction. The participants were unaware of the experiment. A cross-over design was used in which three restaurants were randomly assigned to a sequence of an intervention and control condition. In the intervention period, the vegetable portion sizes on the plates of main dishes were doubled (150 g of vegetables instead of 75 g) and the portion sizes of meat on the plates were reduced by an average of 12.5%. In the control period, the portion sizes of the main dishes were maintained as usual. In total, 1006 observations and questionnaires were included. Vegetable consumption from plates was significantly higher during the intervention period (M = 115.5 g) than during the control period (M = 61.7 g). Similarly, total vegetable consumption (including side dishes) was significantly higher during the intervention period (M = 178.0 g) than during the control period (M = 137.0 g). Conversely, meat consumption was significantly lower during the intervention period (M = 183.1 g) than during the control period (M = 211.1 g). Satisfaction with the restaurant visit did not differ between the intervention period (M = 1.27) and control period (M = 1.35). Satisfaction with the main dish was significantly lower during the intervention period (M = 1.25) than during the control period (M = 1.38), although in both cases, the scores indicated that participants remained (very) satisfied with their main dish. This study showed that increasing vegetable portions in combination with decreasing meat portions (unknowingly to the consumer) increased the amount of vegetables consumed and decreased the amount of meat consumed. Furthermore, despite the changes in portion sizes, participants remained satisfied with their restaurant visit and main dish. The findings of this study suggest that modifying portion size in restaurants is an effective tool for stimulating vegetable consumption and consequently healthy and sustainable diets.

  7. A dynamic systems engineering methodology research study. Phase 2: Evaluating methodologies, tools, and techniques for applicability to NASA's systems projects

    Science.gov (United States)

    Paul, Arthur S.; Gill, Tepper L.; Maclin, Arlene P.

    1989-01-01

    A study of NASA's Systems Management Policy (SMP) concluded that the primary methodology being used by the Mission Operations and Data Systems Directorate and its subordinate, the Networks Division, is very effective. Still some unmet needs were identified. This study involved evaluating methodologies, tools, and techniques with the potential for resolving the previously identified deficiencies. Six preselected methodologies being used by other organizations with similar development problems were studied. The study revealed a wide range of significant differences in structure. Each system had some strengths but none will satisfy all of the needs of the Networks Division. Areas for improvement of the methodology being used by the Networks Division are listed with recommendations for specific action.

  8. Monitoring the viscosity of diesel engine lubricating oil by using acoustic emission technique, the selection of measurement parameters

    International Nuclear Information System (INIS)

    Othman Inayatullah; Nordin Jamaludin; Fauziah Mat

    2009-04-01

    Acoustic emission technique has been developed through years of monitoring and diagnosis of bearing, but it is still new in the diagnosis and monitoring of lubrication oil to bearings drive. The propagation of acoustic emission signal is generated when the signal piston on the cylinder liner lubricating oil which is a par. The signal is analyzed in time domain to obtain the parameters of root mean squared, amplitude, energy and courtesy. Lubricant viscosity will undergo changes due to temperature, pressure and useful. This study focuses on the appropriate parameters for the diagnosis and monitoring of lubricating oil viscosity. Studies were conducted at a constant rotational speed and temperature, but use a different age. The results showed that the energy parameter is the best parameter used in this monitoring. However, this parameter cannot be used directly and it should be analyzed using mathematical formulas. This mathematical formula is a relationship between acoustic emission energy with the viscosity of lubricating oil. (author)

  9. Engineering Design Handbook: Maintenance Engineering Techniques

    Science.gov (United States)

    1975-06-30

    con- form to the shape of the component or assem- bly. The coating protects components from fungus, dirt, moisture, salt air, fingerprints , etc... fingerprints , body oils, and solder flux before the conformal coating is applied. Contaminants must be removed so that the conformal coating will adhere to...Paint shops n. Steam cleaning shops o. Sandblasting shops p. Woodworking and plastic shops q. Canvas shops r. Chemical cleaning and plating shops

  10. EPRI engineering workstation software - Discussion and demonstration

    International Nuclear Information System (INIS)

    Stewart, R.P.; Peterson, C.E.; Agee, L.J.

    1992-01-01

    Computing technology is undergoing significant changes with respect to engineering applications in the electric utility industry. These changes result mainly from the introduction of several UNIX workstations that provide mainframe calculational capability at much lower costs. The workstations are being coupled with microcomputers through local area networks to provide engineering groups with a powerful and versatile analysis capability. PEGASYS, the Professional Engineering Graphic Analysis System, is a software package for use with engineering analysis codes executing in a workstation environment. PEGASYS has a menu driven, user-friendly interface to provide pre-execution support for preparing unput and graphical packages for post-execution analysis and on-line monitoring capability for engineering codes. The initial application of this software is for use with RETRAN-02 operating on an IBM RS/6000 workstation using X-Windows/UNIX and a personal computer under DOS

  11. Application of cell-surface engineering for visualization of yeast in bread dough: development of a fluorescent bio-imaging technique in the mixing process of dough.

    Science.gov (United States)

    Maeda, Tatsuro; Shiraga, Seizaburo; Araki, Tetsuya; Ueda, Mitsuyoshi; Yamada, Masaharu; Takeya, Koji; Sagara, Yasuyuki

    2009-07-01

    Cell-surface engineering (Ueda et al., 2000) has been applied to develop a novel technique to visualize yeast in bread dough. Enhanced green fluorescent protein (EGFP) was bonded to the surface of yeast cells, and 0.5% EGFP yeasts were mixed into the dough samples at four different mixing stages. The samples were placed on a cryostat at -30 degrees C and sliced at 10 microm. The sliced samples were observed at an excitation wavelength of 480 nm and a fluorescent wavelength of 520 nm. The results indicated that the combination of the EGFP-displayed yeasts, rapid freezing, and cryo-sectioning made it possible to visualize 2-D distribution of yeast in bread dough to the extent that the EGFP yeasts could be clearly distinguished from the auto-fluorescent background of bread dough.

  12. Integration of advanced geoscience and engineering techniques to quantify interwell heterogeneity in reservoir models. Final report, September 29, 1993--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, W.W.; Buckley, J.S.; Ouenes, A.

    1997-05-01

    The goal of this three-year project was to provide a quantitative definition of reservoir heterogeneity. This objective was accomplished through the integration of geologic, geophysical, and engineering databases into a multi-disciplinary understanding of reservoir architecture and associated fluid-rock and fluid-fluid interactions. This interdisciplinary effort integrated geological and geophysical data with engineering and petrophysical results through reservoir simulation to quantify reservoir architecture and the dynamics of fluid-rock and fluid-fluid interactions. An improved reservoir description allows greater accuracy and confidence during simulation and modeling as steps toward gaining greater recovery efficiency from existing reservoirs. A field laboratory, the Sulimar Queen Unit, was available for the field research. Several members of the PRRC staff participated in the development of improved reservoir description by integration of the field and laboratory data as well as in the development of quantitative reservoir models to aid performance predictions. Subcontractors from Stanford University and the University of Texas at Austin (UT) collaborated in the research and participated in the design and interpretation of field tests. The three-year project was initiated in September 1993 and led to the development and application of various reservoir description methodologies. A new approach for visualizing production data graphically was developed and implemented on the Internet. Using production data and old gamma rays logs, a black oil reservoir model that honors both primary and secondary performance was developed. The old gamma ray logs were used after applying a resealing technique, which was crucial for the success of the project. In addition to the gamma ray logs, the development of the reservoir model benefitted from an inverse Drill Stem Test (DST) technique which provided initial estimates of the reservoir permeability at different wells.

  13. Strategies for cell manipulation and skeletal tissue engineering using high-throughput polymer blend formulation and microarray techniques.

    Science.gov (United States)

    Khan, Ferdous; Tare, Rahul S; Kanczler, Janos M; Oreffo, Richard O C; Bradley, Mark

    2010-03-01

    A combination of high-throughput material formulation and microarray techniques were synergistically applied for the efficient analysis of the biological functionality of 135 binary polymer blends. This allowed the identification of cell-compatible biopolymers permissive for human skeletal stem cell growth in both in vitro and in vivo applications. The blended polymeric materials were developed from commercially available, inexpensive and well characterised biodegradable polymers, which on their own lacked both the structural requirements of a scaffold material and, critically, the ability to facilitate cell growth. Blends identified here proved excellent templates for cell attachment, and in addition, a number of blends displayed remarkable bone-like architecture and facilitated bone regeneration by providing 3D biomimetic scaffolds for skeletal cell growth and osteogenic differentiation. This study demonstrates a unique strategy to generate and identify innovative materials with widespread application in cell biology as well as offering a new reparative platform strategy applicable to skeletal tissues. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  14. Foods Served in Child Care Facilities Participating in the Child and Adult Care Food Program: Menu Match and Agreement with the New Meal Patterns and Best Practices.

    Science.gov (United States)

    Dave, Jayna M; Cullen, Karen W

    2018-02-20

    To assess the agreement of posted menus with foods served to 3- to 5-year-old children attending federal Child and Adult Care Food Program (CACFP)-enrolled facilities, and the degree to which the facilities met the new meal patterns and best practices. On-site observations and menu coding. Nine early care and education centers. Agreement of posted menus with foods served, and comparison of foods served and consumed with the new CACFP meal guidelines and best practices. Data were compiled for each meal (breakfast, lunch, and snacks). Frequencies and percentages of agreement with the posted menu (coded matches, substitutions, additions, and omissions) were calculated for each food component in the CACFP menu guidelines. Menu total match was created by summing the menu match plus acceptable substitutions. Menus were compared with the new CACFP meal guidelines and best practices. The match between the posted menus and foods actually served to children at breakfast, lunch, and snack was high when the acceptable menu substitutions were considered (approximately 94% to 100% total match). Comparing the menus with the new meal guidelines and best practices, the 1 guideline that was fully implemented was serving only unflavored, low-fat, or 1% milk; fruit and vegetable guidelines were partially met; fruit juice was not served often, nor were legumes; the guideline for 1 whole grain-rich serving/d was not met; and regular beef and full-fat cheese products were commonly served. Early care and education centers enrolled in CACFP provided meals that met the current CACFP guidelines. Some menu improvements are needed for the centers to meet the new guidelines and best practices. Copyright © 2018 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  15. Density gradient multilayered polymerization (DGMP): a novel technique for creating multi-compartment, customizable scaffolds for tissue engineering.

    Science.gov (United States)

    Joshi-Barr, Shivanjali; Karpiak, Jerome V; Ner, Yogesh; Wen, Jessica H; Engler, Adam J; Almutairi, Adah

    2013-02-12

    Complex tissue culture matrices, in which types and concentrations of biological stimuli (e.g. growth factors, inhibitors, or small molecules) or matrix structure (e.g. composition, concentration, or stiffness of the matrix) vary over space, would enable a wide range of investigations concerning how these variables affect cell differentiation, migration, and other phenomena. The major challenge in creating layered matrices is maintaining the structural integrity of layer interfaces without diffusion of individual components from each layer. Current methodologies to achieve this include photopatterning, lithography, sequential functionalization5, freeze drying, microfluidics, or centrifugation, many of which require sophisticated instrumentation and technical skills. Others rely on sequential attachment of individual layers, which may lead to delamination of layers. DGMP overcomes these issues by using an inert density modifier such as iodixanol to create layers of varying densities. Since the density modifier can be mixed with any prepolymer or bioactive molecule, DGMP allows each scaffold layer to be customized. Simply varying the concentration of the density modifier prevents mixing of adjacent layers while they remain aqueous. Subsequent single step polymerization gives rise to a structurally continuous multilayered scaffold, in which each layer has distinct chemical and mechanical properties. The density modifier can be easily removed with sufficient rinsing without perturbation of the individual layers or their components. This technique is therefore well suited for creating hydrogels of various sizes, shapes, and materials. A protocol for fabricating a 2D-polyethylene glycol (PEG) gel, in which alternating layers incorporate RGDS-350, is outlined below. We use PEG because it is biocompatible and inert. RGDS, a cell adhesion peptide, is used to demonstrate spatial restriction of a biological cue, and the conjugation of a fluorophore (Alexa Fluor 350) enables

  16. Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique.

    Science.gov (United States)

    Zhou, Zuoxin; Buchanan, Fraser; Mitchell, Christina; Dunne, Nicholas

    2014-05-01

    In this study, calcium phosphate (CaP) powders were blended with a three-dimensional printing (3DP) calcium sulfate (CaSO4)-based powder and the resulting composite powders were printed with a water-based binder using the 3DP technology. Application of a water-based binder ensured the manufacture of CaP:CaSO4 constructs on a reliable and repeatable basis, without long term damage of the printhead. Printability of CaP:CaSO4 powders was quantitatively assessed by investigating the key 3DP process parameters, i.e. in-process powder bed packing, drop penetration behavior and the quality of printed solid constructs. Effects of particle size, CaP:CaSO4 ratio and CaP powder type on the 3DP process were considered. The drop penetration technique was used to reliably identify powder formulations that could be potentially used for the application of tissue engineered bone scaffolds using the 3DP technique. Significant improvements (pprinted constructs were manufactured, which exhibited appropriate green compressive strength and a high level of printing accuracy. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Parents' meal choices for their children at fast food and family restaurants with different menu labeling presentations.

    Science.gov (United States)

    Lee, Kiwon; Lee, Youngmi

    2018-06-01

    This study examined the effect of nutrition labeling formats on parents' food choices for their children at different restaurant types. An online survey was conducted with 1,980 parents of children aged 3-12 years. Participants were randomly assigned to fast food or family restaurant scenarios, and one of four menu stimuli conditions: no labeling, low-calorie symbol (symbol), numeric value (numeric), and both low-calorie symbol and numeric value (symbol + numeric). Participants selected menu items for their children. Menu choices and total calories were compared by nutrition labeling formats in each type of the restaurant. Low-calorie item selections were scored and a two-way analysis of variance (ANOVA) was conducted for an interaction effect between restaurant and labeling type. In the fast food restaurant group, parents presented with low-calorie symbols selected the lowest calorie items more often than those not presented with the format. Parents in the symbol + numeric condition selected significantly fewer calories (653 kcal) than those in the no labeling (677 kcal) or numeric conditions (674 kcal) ( P = 0.006). In the family restaurant group, no significant difference were observed among different labeling conditions. A significant interaction between restaurant and labeling type on low-calorie selection score (F = 6.03, P restaurant type to jointly affect parents' food choices for their children. The provision of easily interpretable nutritional information format at fast food restaurants may encourage healthier food choices of parents for their children; however, the effects were negligible at family restaurants.

  18. Advocacy coalitions involved in California's menu labeling policy debate: Exploring coalition structure, policy beliefs, resources, and strategies.

    Science.gov (United States)

    Payán, Denise D; Lewis, LaVonna B; Cousineau, Michael R; Nichol, Michael B

    2017-03-01

    Advocacy coalitions often play an important role in the state health policymaking process, yet little is known about their structure, composition, and behavior. In 2008, California became the first state to enact a menu labeling law. Using the advocacy coalition framework, we examine different facets of the coalitions involved in California's menu labeling policy debate. We use a qualitative research approach to identify coalition members and explore their expressed beliefs and policy arguments, resources, and strategies by analyzing legislative documents (n = 87) and newspaper articles (n = 78) produced between 1999 and 2009. Between 2003 and 2008, six menu labeling bills were introduced in the state's legislature. We found the issue received increasing media attention during this period. We identified two advocacy coalitions involved in the debate-a public health (PH) coalition and an industry coalition. State organizations acted as coalition leaders and participated for a longer duration than elected officials. The structure and composition of each coalition varied. PH coalition leadership and membership notably increased compared to the industry coalition. The PH coalition, led by nonprofit PH and health organizations, promoted a clear and consistent message around informed decision making. The industry coalition, led by a state restaurant association, responded with cost and implementation arguments. Each coalition used various resources and strategies to advance desired outcomes. PH coalition leaders were particularly effective at using resources and employing advocacy strategies, which included engaging state legislators as coalition members, using public opinion polls and information, and leveraging media resources to garner support. Policy precedence and a local policy push emerged as important policymaking strategies. Areas for future research on the state health policymaking process are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Advocacy Coalitions involved in California’s Menu Labeling Policy Debate: Exploring Coalition Structure, Policy Beliefs, Resources, and Strategies

    Science.gov (United States)

    Payán, Denise D.; Lewis, LaVonna B.; Cousineau, Michael R.; Nichol, Michael B.

    2017-01-01

    Advocacy coalitions often play an important role in the state health policymaking process, yet little is known about their structure, composition, and behavior. In 2008, California became the first state to enact a menu labeling law. Using the advocacy coalition framework, we examine different facets of the coalitions involved in California’s menu labeling policy debate. We use a qualitative research approach to identify coalition members and explore their expressed beliefs and policy arguments, resources, and strategies by analyzing legislative documents (n=87) and newspaper articles (n=78) produced between 1999 and 2009. Between 2003 and 2008, six menu labeling bills were introduced in the state’s legislature. We found the issue received increasing media attention during this period. We identified two advocacy coalitions involved in the debate—a public health (PH) coalition and an industry coalition. State organizations acted as coalition leaders and participated for a longer duration than elected officials. The structure and composition of each coalition varied. PH coalition leadership and membership notably increased compared to the industry coalition. The PH coalition, led by nonprofit PH and health organizations, promoted a clear and consistent message around informed decision making. The industry coalition, led by a state restaurant association, responded with cost and implementation arguments. Each coalition used various resources and strategies to advance desired outcomes. PH coalition leaders were particularly effective at using resources and employing advocacy strategies, which included engaging state legislators as coalition members, using public opinion polls and information, and leveraging media resources to garner support. Policy precedence and a local policy push emerged as important policymaking strategies. Areas for future research on the state health policymaking process are discussed. PMID:28161674

  20. Artificial intelligence and engineering curricula - are changes needed?

    International Nuclear Information System (INIS)

    Jenkins, J.P.

    1988-01-01

    The purpose of this paper is to identify the expected impact of artificial intelligence (AI) on curricula and training courses. From this examination, new elements are proposed for the academic preparation and training of engineers who will evaluate and use these systems and capabilities. Artificial intelligence, from an operational viewpoint, begins with a set of rules governing the operation of logic, implemented via computer software and userware. These systems apply logic and experience to handling problems in an intelligent approach, especially when the number of alternatives to problem solution is beyond the scope of the human user. Usually, AI applications take the form of expert systems. An expert system embodies in the computer the knowledge-based component of an expert, such as domain knowledge and reasoning techniques, in such a form that the system can offer intelligent advice and, on demand, justify its own line of reasoning. Two languages predominate, LISP and Prolog. The AI user may interface with the knowledge base via one of these languages or by means of menu displays, cursor selections, or other conventional user interface methods

  1. Healthier side dishes at restaurants: an analysis of children's perspectives, menu content, and energy impacts.

    Science.gov (United States)

    Anzman-Frasca, Stephanie; Dawes, Franciel; Sliwa, Sarah; Dolan, Peter R; Nelson, Miriam E; Washburn, Kyle; Economos, Christina D

    2014-07-04

    Children consume restaurant-prepared foods at high rates, suggesting that interventions and policies targeting consumption of these foods have the potential to improve diet quality and attenuate excess energy intake. One approach to encouraging healthier dietary intake in restaurants is to offer fruits and vegetables (FV) as side dishes, as opposed to traditional, energy-dense accompaniments like French fries. The aims of the current study were to examine: children's views about healthier side dishes at restaurants; current side dish offerings on children's menus at leading restaurants; and potential energy reductions when substituting FV side dishes in place of French fries. To investigate children's attitudes, a survey was administered to a nationally representative sample of U.S. 8- to 18-year-olds (n = 1178). To examine current side dish offerings, children's menus from leading quick service (QSR; n = 10) and full service restaurant chains (FSR; n = 10) were analyzed. Energy reductions that could result from substituting commonly-offered FV side dishes for French fries were estimated using nutrition information corresponding to the children's menu items. Two-thirds of children reported that they would not feel negatively about receiving FV sides instead of French fries with kids' meals. Liking/taste was the most common reason that children gave to explain their attitudes about FV side dishes. Nearly all restaurants offered at least 1 FV side dish option, but at most restaurants (60% of QSR; 70% of FSR), FV sides were never served by default. Substituting FV side dishes for French fries yielded an average estimated energy reduction of at least 170 calories. Results highlight some healthy trends in the restaurant context, including the majority of children reporting non-negative attitudes about FV side dishes and the consistent availability of FV side dish options at leading QSR and FSR. Yet the minority of restaurants offer these FV sides by default

  2. Geoenvironmental engineering

    International Nuclear Information System (INIS)

    Shin, Eun Cheol; Park, Jeong Jun

    2009-08-01

    This book deals with definition of soil and scope of clean-up of soil, trend of geoenvironmental engineering at home and foreign countries, main concern of geoenvironmental engineering in domestic and abroad, design and building of landfills such as summary, trend of landfill policy in Korea, post management of landfill facilities, stabilizing and stability of landfill, research method and soil pollution source, restoration technology of soil pollution like restoration technique of oil pollution with thermal processing.

  3. Virtual Solar Energy Center: A Case Study of the Use of Advanced Visualization Techniques for the Comprehension of Complex Engineering Products and Processes

    Science.gov (United States)

    Ritter, Kenneth August, III

    Industry has a continuing need to train its workforce on recent engineering developments, but many engineering products and processes are hard to explain because of limitations of size, visibility, time scale, cost, and safety. The product or process might be difficult to see because it is either very large or very small, because it is enclosed within an opaque container, or because it happens very fast or very slowly. Some engineering products and processes are also costly or unsafe to use for training purposes, and sometimes the domain expert is not physically available at the training location. All these limitations can potentially be addressed using advanced visualization techniques such as virtual reality. This dissertation describes the development of an immersive virtual reality application using the Six Sigma DMADV process to explain the main equipment and processes used in a concentrating solar power plant. The virtual solar energy center (VEC) application was initially developed and tested in a Cave Automatic Virtual Environment (CAVE) during 2013 and 2014. The software programs used for development were SolidWorks, 3ds Max Design, and Unity 3D. Current hardware and software technologies that could complement this research were analyzed. The NVIDA GRID Visual Computing Appliance (VCA) was chosen as the rendering solution for animating complex CAD models in this application. The MiddleVR software toolkit was selected as the toolkit for VR interactions and CAVE display. A non-immersive 3D version of the VEC application was tested and shown to be an effective training tool in late 2015. An immersive networked version of the VEC allows the user to receive live instruction from a trainer being projected via depth camera imagery from a remote location. Four comparative analysis studies were performed. These studies used the average normalized gain from pre-test scores to determine the effectiveness of the various training methods. With the DMADV approach

  4. Engineering surveying

    CERN Document Server

    Schofield, W

    2001-01-01

    The aim of Engineering Surveying has always been to impart and develop a clear understanding of the basic topics of the subject. The author has fully revised the book to make it the most up-to-date and relevant textbook available on the subject.The book also contains the latest information on trigonometric levelling, total stations and one-person measuring systems. A new chapter on satellites ensures a firm grasp of this vitally important topic.The text covers engineering surveying modules for civil engineering students on degree courses and forms a reference for the engineering surveying module in land surveying courses. It will also prove to be a valuable reference for practitioners.* Simple clear introduction to surveying for engineers* Explains key techniques and methods* Details reading systems and satellite position fixing

  5. Exploring enhanced menu labels' influence on fast food selections and exercise-related attitudes, perceptions, and intentions.

    Science.gov (United States)

    Lee, Morgan S; Thompson, Joel Kevin

    2016-10-01

    Labeling restaurant menus with calorie counts is a popular public health intervention, but research shows these labels have small, inconsistent effects on behavior. Supplementing calorie counts with physical activity equivalents may produce stronger results, but few studies of these enhanced labels have been conducted, and the labels' potential to influence exercise-related outcomes remains unexplored. This online study evaluated the impact of no information, calories-only, and calories plus equivalent miles of walking labels on fast food item selection and exercise-related attitudes, perceptions, and intentions. Participants (N = 643) were randomly assigned to a labeling condition and completed a menu ordering task followed by measures of exercise-related outcomes. The labels had little effect on ordering behavior, with no significant differences in total calories ordered and counterintuitive increases in calories ordered in the two informational conditions in some item categories. The labels also had little impact on the exercise-related outcomes, though participants in the two informational conditions perceived exercise as less enjoyable than did participants in the no information condition, and trends following the same pattern were found for other exercise-related outcomes. The present findings concur with literature demonstrating small, inconsistent effects of current menu labeling strategies and suggest that alternatives such as traffic light systems should be explored. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Estimating the impact of various menu labeling formats on parents' demand for fast-food kids' meals for their children: An experimental auction.

    Science.gov (United States)

    Hobin, Erin; Lillico, Heather; Zuo, Fei; Sacco, Jocelyn; Rosella, Laura; Hammond, David

    2016-10-01

    This study experimentally tested whether parents' demand for fast-food kids' meals for their children is influenced by various menu labeling formats disclosing calorie and sodium information. The study also examined the effect of various menu labeling formats on parents' ability to identify fast-food kids' meals with higher calorie and sodium content. Online surveys were conducted among parents of children aged 3-12. Parents were randomized to view 1 of 5 menu conditions: 1) No Nutrition Information; 2) Calories-Only; 3) Calories + Contextual Statement (CS); 4) Calories, Sodium, + CS; and, 5) Calorie and Sodium in Traffic Lights + CS. Using an established experimental auction study design, parents viewed replicated McDonald's menus according to their assigned condition and were asked to bid on 4 Happy Meals. A randomly selected price was chosen; bids equal to or above this price "won" the auction, and bids less than this price "lost" the auction. After the auction, participants were asked to identify the Happy Meal with the highest calories and sodium content. Adjusting for multiple comparisons and covariates, the Calories, Sodium, + CS menu had a mean attributed value across all 4 Happy Meals which was 8% lower (-$0.31) than the Calories + CS menu (p < 0.05). Significantly more parents in the 4 menu conditions providing calories were able to correctly identify the Happy Meal with the highest calories (p < 0.0001) and significantly more parents in the 2 conditions providing sodium information were able to correctly identify the Happy Meal with the highest sodium content (p < 0.0001). Menus disclosing both calories and sodium information may reduce demand for fast-food kids' meals and better support parents in making more informed and healthier food choices for their children. Copyright © 2016. Published by Elsevier Ltd.

  7. [In vitro comparison of root canal preparation with step-back technique and GT rotary file--a nickel-titanium engine driven rotary instrument system].

    Science.gov (United States)

    Krajczár, Károly; Tóth, Vilmos; Nyárády, Zoltán; Szabó, Gyula

    2005-06-01

    The aim of the authors' study was to compare the remaining root canal wall thickness and the preparation time of root canals, prepared either with step-back technique, or with GT Rotary File, an engine driven nickel-titanium rotary instrument system. Twenty extracted molars were decoronated. Teeth were divided in two groups. In Group 1 root canals were prepared with step-back technique. In Group 2 GT Rotary File System was utilized. Preoperative vestibulo-oral X-ray pictures were taken from all teeth with radiovisiograph (RVG). The final preparations at the mesiobuccal canals (MB) were performed with size #30 and palatinal/distal canals with size #40 instruments. Postoperative RVG pictures were taken ensuring the preoperative positioning. The working time was measured in seconds during each preparation. The authors also assessed the remaining root canal wall thickness at 3, 6 and 9 mm from the radiological apex, comparing the width of the canal walls of the vestibulo-oral projections on pre- and postoperative RVG pictures both mesially and buccally. The ratios of the residual and preoperative root canal wall thickness were calculated and compared. The largest difference was found at the MB canals of the coronal and middle third level of the root, measured on the distal canal wall. The ratio of the remaining dentin wall thickness at the coronal and the middle level in the case of step-back preparation was 0.605 and 0.754, and 0.824 and 0.895 in the cases of GT files respectively. The preparation time needed for GT Rotary File System was altogether 68.7% (MB) and 52.5% (D/P canals) of corresponding step-back preparation times. The use of GT Rotary File with comparison of standard step-back method resulted in a shortened preparation time and excessive damage of the coronal part of the root canal could be avoided.

  8. Concrete construction engineering handbook

    CERN Document Server

    Nawy, Edward G

    2008-01-01

    Provides coverage of concrete construction engineering and technology. This work features discussions focusing on: the advances in engineered concrete materials; reinforced concrete construction; specialized construction techniques; and, design recommendations for high performance.

  9. A wireless batteryless in vivo EKG and core body temperature sensing microsystem with 60 Hz suppression technique for untethered genetically engineered mice real-time monitoring.

    Science.gov (United States)

    Chaimanonart, Nattapon; Young, Darrin J

    2009-01-01

    A wireless, batteryless, and implantable EKG and core body temperature sensing microsystem with adaptive RF powering for untethered genetically engineered mice real-time monitoring is designed, implemented, and in vivo characterized. A packaged microsystem, exhibiting a total size of 9 mm x 7 mm x 3 mm with a weight of 400 mg including a pair of stainless-steel EKG electrodes, is implanted in a mouse abdomen for real-time monitoring. A low power 2 mm x 2 mm ASIC, consisting of an EKG amplifier, a proportional-to-absolute-temperature (PTAT)-based temperature sensor, an RF power sensing circuit, an RF-DC power converter, an 8-bit ADC, digital control circuitry, and a 433 MHz FSK transmitter, is powered by an adaptively controlled external RF energy source at 4 MHz to ensure a stable 2V supply with 156microA current driving capability for the overall microsystem. An electrical model for analyzing 60 Hz interference based on 2-electrode and 3-electrode configurations is proposed and compared with in vivo evaluation results. Due to the small laboratory animal chest area, a 60 Hz suppression technique by employing input termination resistors is chosen for two-EKG-electrode implant configuration.

  10. Education of mining engineers with the specialization in Rescue, fire and safety technique at the BERG Faculty of the Technical University of Košice

    Directory of Open Access Journals (Sweden)

    Sedlatý Václav

    2002-12-01

    Full Text Available After the separation of Czechoslovakia, in 1993, the Mining Faculty (now BERG Faculty of the Technical University of Košice started a teaching program with the specialization in mining rescue, fire guard and safety technique at the Detachment in Prievidza, because of all the needs and conditions related to the education of engineers in the mentioned areas. During the last 10 years, the Detachment in Prievidza has been growing in terms of number of students. From the beginning of this period to present days 75 students graduated. The full-time studies last five years and the academic years are divided into two semesters of 15 weeks each. The semesters are finished by examination sessions. The first 2 years, in principle, include basic studies in mathematics, scientific subjects and some subjects related to earth sciences. The third and fourth year are generally devoted to basic technical subjects of mining and underground works, and then to rescue, fire and safety subjects. A practical work experience has to be gained by students in a mine or fire and safety stations. The practical training term is scheduled after the third academic year. During the last two semesters the students are preparing their Master’s degree thesis using a stay in the mine company or other firms to receive the necessary information and data.

  11. Fluids engineering

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Fluids engineering has played an important role in many applications, from ancient flood control to the design of high-speed compact turbomachinery. New applications of fluids engineering, such as in high-technology materials processing, biotechnology, and advanced combustion systems, have kept up unwaining interest in the subject. More accurate and sophisticated computational and measurement techniques are also constantly being developed and refined. On a more fundamental level, nonlinear dynamics and chaotic behavior of fluid flow are no longer an intellectual curiosity and fluid engineers are increasingly interested in finding practical applications for these emerging sciences. Applications of fluid technology to new areas, as well as the need to improve the design and to enhance the flexibility and reliability of flow-related machines and devices will continue to spur interest in fluids engineering. The objectives of the present seminar were: to exchange current information on arts, science, and technology of fluids engineering; to promote scientific cooperation between the fluids engineering communities of both nations, and to provide an opportunity for the participants and their colleagues to explore possible joint research programs in topics of high priority and mutual interest to both countries. The Seminar provided an excellent forum for reviewing the current state and future needs of fluids engineering for the two nations. With the Seminar ear-marking the first formal scientific exchange between Korea and the United States in the area of fluids engineering, the scope was deliberately left broad and general

  12. Cogeneration techniques; Les techniques de cogeneration

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-01

    This dossier about cogeneration techniques comprises 12 parts dealing successively with: the advantages of cogeneration (examples of installations, electrical and thermal efficiency); the combustion turbine (principle, performances, types); the alternative internal combustion engines (principle, types, rotation speed, comparative performances); the different configurations of cogeneration installations based on alternative engines and based on steam turbines (coal, heavy fuel and natural gas-fueled turbines); the environmental constraints of combustion turbines (pollutants, techniques of reduction of pollutant emissions); the environmental constraints of alternative internal combustion engines (gas and diesel engines); cogeneration and energy saving; the techniques of reduction of pollutant emissions (pollutants, unburnt hydrocarbons, primary and secondary (catalytic) techniques, post-combustion); the most-advanced configurations of cogeneration installations for enhanced performances (counter-pressure turbines, massive steam injection cycles, turbo-chargers); comparison between the performances of the different cogeneration techniques; the tri-generation technique (compression and absorption cycles). (J.S.)

  13. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  14. Thermochemical surface engineering of steels

    DEFF Research Database (Denmark)

    Thermochemical Surface Engineering of Steels provides a comprehensive scientific overview of the principles and different techniques involved in thermochemical surface engineering, including thermodynamics, kinetics principles, process technologies and techniques for enhanced performance of steels...

  15. A Meta-Analysis to Determine the Impact of Restaurant Menu Labeling on Calories and Nutrients (Ordered or Consumed) in U.S. Adults.

    Science.gov (United States)

    Cantu-Jungles, Thaisa M; McCormack, Lacey A; Slaven, James E; Slebodnik, Maribeth; Eicher-Miller, Heather A

    2017-09-30

    A systematic review and meta-analysis determined the effect of restaurant menu labeling on calories and nutrients chosen in laboratory and away-from-home settings in U.S. adults. Cochrane-based criteria adherent, peer-reviewed study designs conducted and published in the English language from 1950 to 2014 were collected in 2015, analyzed in 2016, and used to evaluate the effect of nutrition labeling on calories and nutrients ordered or consumed. Before and after menu labeling outcomes were used to determine weighted mean differences in calories, saturated fat, total fat, carbohydrate, and sodium ordered/consumed which were pooled across studies using random effects modeling. Stratified analysis for laboratory and away-from-home settings were also completed. Menu labeling resulted in no significant change in reported calories ordered/consumed in studies with full criteria adherence, nor the 14 studies analyzed with ≤1 unmet criteria, nor for change in total ordered carbohydrate, fat, and saturated fat (three studies) or ordered or consumed sodium (four studies). A significant reduction of 115.2 calories ordered/consumed in laboratory settings was determined when analyses were stratified by study setting. Menu labeling away-from-home did not result in change in quantity or quality, specifically for carbohydrates, total fat, saturated fat, or sodium, of calories consumed among U.S. adults.

  16. Foods served in child care facilities participating in the Child and Adult Care Food Program: Menu match and agreement with the new meal patterns and best practices

    Science.gov (United States)

    Our objective was to assess the agreement of posted menus with foods served to 3- to 5-year-old children attending federal Child and Adult Care Food Program (CACFP)-enrolled facilities, and the degree to which the facilities met the new meal patterns and best practices. On-site observations and menu...

  17. Guide to advanced empirical software engineering

    National Research Council Canada - National Science Library

    Shull, Forrest; Singer, Janice; Sjøberg, Dag I. K

    2008-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Section I Research Methods and Techniques Chapter 1 Software Engineering Data Collection for Field Studies...

  18. Promoting Healthy Menu Choices in Fast Food Restaurant Advertising: Influence of Perceived Brand Healthiness, Brand Commitment, and Health Consciousness.

    Science.gov (United States)

    Choi, Hojoon; Reid, Leonard N

    2018-01-01

    Fast food restaurants have increasingly turned to healthier choices to counter criticisms of nutritionally poor menu offerings and to differentiate themselves from the competition. However, research has yet to specifically investigate how consumers respond to advertisements for these healthier foods. To address this knowledge gap, two experiments were conducted to examine how perceived brand healthiness, brand commitment, and health consciousness influence responses to nutrient-content claimed print advertisements for healthy foods. Findings indicate that consumer responsiveness varies across the three factors but is more positive for advertisements placed by perceivably healthy restaurant brands, and that brand commitment and health consciousness play significant roles in affecting how consumer respond to such advertising. Several theoretical and managerial implications of the findings are discussed.

  19. The Decision Support System (DSS) Application to Determination of Diabetes Mellitus Patient Menu Using a Genetic Algorithm Method

    Science.gov (United States)

    Zuliyana, Nia; Suseno, Jatmiko Endro; Adi, Kusworo

    2018-02-01

    Composition of foods containing sugar in people with Diabetes Mellitus should be balanced, so an app is required for facilitate the public and nutritionists in determining the appropriate food menu with calorie requirement of diabetes patient. This research will be recommended to determination of food variation for using Genetic Algorithm. The data used is nutrient content of food obtained from Tabel Komposisi Pangan Indonesia (TKPI). The requirement of caloric value the patient can be used the PERKENI 2015 method. Then the data is processed to determine the best food menu consisting of energy (E), carbohydrate (K), fat (L) and protein (P) requirements. The system is comparised with variation of Genetic Algorithm parameters is the total of chromosomes, Probability of Crossover (Pc) and Probability of Mutation (Pm). Maximum value of the probability generation of crossover and probability of mutation will be the more variations of food that will come out. For example, patient with gender is women aged 61 years old, height 160 cm, weight 55 kg, will be resulted number of calories: (E=1621.4, K=243.21, P=60.80, L=45.04), with the gene=4, chromosomes=3, generation=3, Pc=0.2, and Pm=0.2. The result obtained is the three varians: E=1607.25, K=198.877, P=95.385, L=47.508), (E=1633.25, K=196.677, P=85.885, L=55.758), (E=1630.90, K=177.455, P=85.245, L=64.335).

  20. A menu-driven software package of Bayesian nonparametric (and parametric) mixed models for regression analysis and density estimation.

    Science.gov (United States)

    Karabatsos, George

    2017-02-01

    Most of applied statistics involves regression analysis of data. In practice, it is important to specify a regression model that has minimal assumptions which are not violated by data, to ensure that statistical inferences from the model are informative and not misleading. This paper presents a stand-alone and menu-driven software package, Bayesian Regression: Nonparametric and Parametric Models, constructed from MATLAB Compiler. Currently, this package gives the user a choice from 83 Bayesian models for data analysis. They include 47 Bayesian nonparametric (BNP) infinite-mixture regression models; 5 BNP infinite-mixture models for density estimation; and 31 normal random effects models (HLMs), including normal linear models. Each of the 78 regression models handles either a continuous, binary, or ordinal dependent variable, and can handle multi-level (grouped) data. All 83 Bayesian models can handle the analysis of weighted observations (e.g., for meta-analysis), and the analysis of left-censored, right-censored, and/or interval-censored data. Each BNP infinite-mixture model has a mixture distribution assigned one of various BNP prior distributions, including priors defined by either the Dirichlet process, Pitman-Yor process (including the normalized stable process), beta (two-parameter) process, normalized inverse-Gaussian process, geometric weights prior, dependent Dirichlet process, or the dependent infinite-probits prior. The software user can mouse-click to select a Bayesian model and perform data analysis via Markov chain Monte Carlo (MCMC) sampling. After the sampling completes, the software automatically opens text output that reports MCMC-based estimates of the model's posterior distribution and model predictive fit to the data. Additional text and/or graphical output can be generated by mouse-clicking other menu options. This includes output of MCMC convergence analyses, and estimates of the model's posterior predictive distribution, for selected

  1. Controlling particulate matter under the Clean Air Act: a menu of options

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This document was prepared by STAPPA and ALAPCO to help US state and local air pollution control officials understand the effects of particulate matter (PM) on human health and air quality, the relative contribution of various sources to particulate emissions, and the effectiveness and costs of various approaches - including innovative ones - to minimizing these emissions. The document covers particulate matter with a nominal diameter of 10 microns ({mu}m) or less (PM{sub 10}), including `fine` PM of 2.5 microns or less in diameter (PM{sub 2.5}). Sections cover: the effects of particulate matter on human health; regulatory issues; characterization of particulate matter; emission control strategies for mobile sources (diesel engines, small nonroad engines, alternative fuels etc.), particulates from stationary sources (electric utilities, industry and commercial fuel combustion; mineral products industry, metallurgical industry etc.); particulates from area sources; and market-based strategies for controlling particulate matter. 2 apps.

  2. A study on the piston ring wear in automotive engine Seat 1500 CA by means of radioactive tracer technique; Estudio del desgaste de segmentos en motor Seat 1500 CA mediante trazadores radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Val Cob, M del; Chul, Y; Fuentes Figuera de Vargas, J.

    1971-07-01

    The iron side wear in the chromium-plated top compression ring has been a matter of interest for the engine makers and it has been required by them to investigate the wear characteristics of the chromium-plated piston ring. Meanwhile, Bureau of Nuclear Energy in Spain (Junta de Energia Nuclear) and Seat Car Manufacturing Company (Sociedad Espanola de Automoviles de Turismo) agreed to study the wear characteristics of chromium-plated piston ring of type CA gasoline engine for Seat 1500 car by means of radioactive tracer technique. (Author) 9 refs.

  3. Special theory on chemical engineering

    International Nuclear Information System (INIS)

    1987-06-01

    This book give a special description about chemical engineering. The contents of this book are special technique for isolation on introduction and separation by membrane, biochemistry engineering, process system engineering, energy engineering, environment engineering, a high molecular new material, election material and research on surface property of catalyst. It has appendixes on history of transition on Korean chemical engineering text contents and history of the activity of Korea chemical engineering institute.

  4. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  5. Airway Clearance Techniques (ACTs)

    Medline Plus

    Full Text Available ... Main Content Skip to Footer CFF Homepage Menu Search What Is CF? X close ABOUT CYSTIC FIBROSIS ... Fibrosis Foundation is the world’s leader in the search for a cure for CF and supports a ...

  6. Airway Clearance Techniques (ACTs)

    Medline Plus

    Full Text Available Skip to Main Content Skip to Footer CFF Homepage Menu Search What Is CF? X close ABOUT ... may be right for you. Search Trials CFF Homepage Cystic Fibrosis Foundation 4550 Montgomery Ave. Suite 1100 ...

  7. Airway Clearance Techniques (ACTs)

    Medline Plus

    Full Text Available ... CFF Homepage Menu Search What Is CF? X close ABOUT CYSTIC FIBROSIS Learn about cystic fibrosis, a ... for CF Sweat Test Life With CF X close Caring for a Child With CF Raising a ...

  8. Music engineering

    CERN Document Server

    Brice, Richard

    2001-01-01

    Music Engineering is a hands-on guide to the practical aspects of electric and electronic music. It is both a compelling read and an essential reference guide for anyone using, choosing, designing or studying the technology of modern music. The technology and underpinning science are introduced through the real life demands of playing and recording, and illustrated with references to well known classic recordings to show how a particular effect is obtained thanks to the ingenuity of the engineer as well as the musician. In addition, an accompanying companion website containing over 50 specially chosen tracks for download, provides practical demonstrations of the effects and techniques described in the book. Written by a music enthusiast and electronic engineer, this book covers the electronics and physics of the subject as well as the more subjective aspects. The second edition includes an updated Digital section including MPEG3 and fact sheets at the end of each chapter to summarise the key electronics and s...

  9. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  10. Battery systems engineering

    CERN Document Server

    Rahn, Christopher D

    2012-01-01

    A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original

  11. Erweiterung des QTI-Standards zur Unterstützung von LongMenu-Fragen sowie Abbildung spezifischer Metadaten in QTI 2.1

    Directory of Open Access Journals (Sweden)

    Holzer, Matthias

    2009-02-01

    Full Text Available Anlässlich der Entwicklung einer Prüfungsfragendatenbank wird die Erweiterung des wichtigsten standardisierten Austauschformats für Prüfungsfragen (QTI um einen medizinspezifischen Fragentyp (LongMenu sowie die Verschlagwortung von Prüfungsitems mit medizinspezifischen Klassifikationen beschrieben. Zur standardgemäßen Erweiterung für LongMenu-Fragen wurde die Liste der Antwortoptionen in einer eigenen Datei abgelegt und mittels einer Listen-ID und der ID des Begriffes in dieser Liste aus der QTI-Spezifikation referenziert. Zusätzlich wurde eine Klassifikation nach der „Learning Objects Metadata Specification“ (LOM in den Metadatenbereich des QTI-Datensatzes integriert, der eine Beschreibung des Fragetyps, des Fachgebietes und des Organsystems eines Items erlaubt.

  12. Pengembangan OSD (On Screen Display dengan Penambahan Menu untuk Aplikasi pada Semi Autonomous Mobile Robot dengan Lengan untuk Mengambil Objek

    Directory of Open Access Journals (Sweden)

    Muhammad Saiful Hak

    2017-01-01

    Full Text Available Tugas Akhir ini membahas pengembangan OSD (On Screen Display dengan sistem FPV (First Person View yang bertujuan untuk mendukung kinerja sebuah RC (Remote Control atau mobile robot dengan cara mengambil data pada RC atau mobile robot tersebut. Penggunaan sensor pad a modul OSD ini terbatas, sehingga dilakukan sebuah pengembangan dengan penambahan pengkabelan dan pemrograman menggunakan kompiler Arduino. Dalam sistem ini, OSD yang dipakai adalah dua buah minimOSD yang telah dirancang dengan penambahan beberapa fitur menu sensor. Pada minimOSD yang pertama data GPS (Global Positioning System berupa posisi lintang dan bujur didapat dari APM (ArduPilot Mega yang diprogram menggunakan minimOSD extra. Pada minimOSD yang kedua didapat data sensor ultrasonik dan posisi lengan robot yang dikirim oleh Arduino Mega pada mobile robot menggunakan pengiriman serial. Sensor suhu, level baterai dan data waktu diperoleh dari penambahan pengkabelan pada pin-pin ATMega328. Hasil olah data sensor pada minimOSD pertama dan kedua yang berupa data visual digabung dan dikirim menuju layar monitor FPV menggunakan video transmiter. Animasi data yang ditampilkan mempunyai batas sebesar 256 data karakter, sehingga posisi lengan robot dan sensor ultrasonik hanya bisa digambarkan berupa perbandingan skala tingkatan dan data teks, sedangkan data sensor yang lain ditampilkan sesuai hasil olah data sebenarnya.

  13. Measuring implementation behaviour of menu guidelines in the childcare setting: confirmatory factor analysis of a theoretical domains framework questionnaire (TDFQ).

    Science.gov (United States)

    Seward, Kirsty; Wolfenden, Luke; Wiggers, John; Finch, Meghan; Wyse, Rebecca; Oldmeadow, Christopher; Presseau, Justin; Clinton-McHarg, Tara; Yoong, Sze Lin

    2017-04-04

    While there are number of frameworks which focus on supporting the implementation of evidence based approaches, few psychometrically valid measures exist to assess constructs within these frameworks. This study aimed to develop and psychometrically assess a scale measuring each domain of the Theoretical Domains Framework for use in assessing the implementation of dietary guidelines within a non-health care setting (childcare services). A 75 item 14-domain Theoretical Domains Framework Questionnaire (TDFQ) was developed and administered via telephone interview to 202 centre based childcare service cooks who had a role in planning the service menu. Confirmatory factor analysis (CFA) was undertaken to assess the reliability, discriminant validity and goodness of fit of the 14-domain theoretical domain framework measure. For the CFA, five iterative processes of adjustment were undertaken where 14 items were removed, resulting in a final measure consisting of 14 domains and 61 items. For the final measure: the Chi-Square goodness of fit statistic was 3447.19; the Standardized Root Mean Square Residual (SRMR) was 0.070; the Root Mean Square Error of Approximation (RMSEA) was 0.072; and the Comparative Fit Index (CFI) had a value of 0.78. While only one of the three indices support goodness of fit of the measurement model tested, a 14-domain model with 61 items showed good discriminant validity and internally consistent items. Future research should aim to assess the psychometric properties of the developed TDFQ in other community-based settings.

  14. Engineering Encounters: Engineering Adaptations

    Science.gov (United States)

    Gatling, Anne; Vaughn, Meredith Houle

    2015-01-01

    Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

  15. Beam modulation: A novel ToF-technique for high resolution diffraction at the Beamline for European Materials Engineering Research (BEER)

    Czech Academy of Sciences Publication Activity Database

    Rouijaa, M.; Kampmann, R.; Šaroun, Jan; Fenske, J.; Beran, Přemysl; Muller, M.; Lukáš, Petr; Schreyer, A.

    2018-01-01

    Roč. 889, č. 5 (2018), s. 7-15 ISSN 0168-9002 R&D Projects: GA MŠk LM2015048 Institutional support: RVO:61389005 Keywords : Time-of-flight diffractometer * strain scanner * residual stress Subject RIV: JF - Nuclear Energetics OBOR OECD: Nuclear related engineering Impact factor: 1.362, year: 2016

  16. Feasibility and efficacy of menu planning combined with individual counselling to improve health outcomes and dietary adherence in people with type 2 diabetes: a pilot study.

    Science.gov (United States)

    Soria-Contreras, Diana C; Bell, Rhonda C; McCargar, Linda J; Chan, Catherine B

    2014-10-01

    The purpose of this study was to test the feasibility and efficacy of implementing a 4-week menu plan combined with individual counselling among people with type 2 diabetes. A 12-week pilot study with a pretest and post-test design was conducted among 15 participants with type 2 diabetes. The menu plan incorporated the overall recommendations of the Canadian Diabetes Association nutrition therapy guidelines and considered factors such as the accessibility, availability and acceptability of foods. Change in glycated hemoglobin (A1C) was the primary outcome, and secondary outcomes were changes in serum lipid, anthropometric and dietary measures. Mean (±SD) age of the participants was 59.3±9.9 years, and duration of diabetes was 8.1±8.3 years. After the program, A1C decreased by 1.0%±0.86% (p1.9 days a week and attended, on average, 4 of 6 counselling sessions. Menu planning and individual counselling were demonstrated to be feasible and effective for diabetes management, and they represent a simple and practical approach to implement the nutritional recommendations for diabetes in Canada. Copyright © 2014 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

  17. Transformable Menu Component for Mobile Device Applications: Working with both Adaptive and Adaptable User Interfaces

    Directory of Open Access Journals (Sweden)

    V. Glavinic

    2008-08-01

    Full Text Available Using a learning system in a mobile environmentis not effective if barriers are not overcome in theinteraction with targeted users. For that purpose all mobileservices, including m-learning ones, demand specialattention being paid to interaction with the user. Whilemobile device applications are becoming more powerful,their development process must utilize the concepts ofuniversal access and universal usability. This paperdescribes the model of both adaptable and adaptive mobileuser interface, through the introduction of a transformablemenu component capable to be personalized to eachindividual user with respect to her/his preferences andinteraction style. We discuss the use of customization andadaptation techniques, with the aim to both enhance mobileHCI and to increase user satisfaction, particularly whenworking with graphically rich m-learning applications.

  18. AAV vector encoding human VEGF165-transduced pectineus muscular flaps increase the formation of new tissue through induction of angiogenesis in an in vivo chamber for tissue engineering: A technique to enhance tissue and vessels in microsurgically engineered tissue.

    Science.gov (United States)

    Moimas, Silvia; Manasseri, Benedetto; Cuccia, Giuseppe; Stagno d'Alcontres, Francesco; Geuna, Stefano; Pattarini, Lucia; Zentilin, Lorena; Giacca, Mauro; Colonna, Michele R

    2015-01-01

    In regenerative medicine, new approaches are required for the creation of tissue substitutes, and the interplay between different research areas, such as tissue engineering, microsurgery and gene therapy, is mandatory. In this article, we report a modification of a published model of tissue engineering, based on an arterio-venous loop enveloped in a cross-linked collagen-glycosaminoglycan template, which acts as an isolated chamber for angiogenesis and new tissue formation. In order to foster tissue formation within the chamber, which entails on the development of new vessels, we wondered whether we might combine tissue engineering with a gene therapy approach. Based on the well-described tropism of adeno-associated viral vectors for post-mitotic tissues, a muscular flap was harvested from the pectineus muscle, inserted into the chamber and transduced by either AAV vector encoding human VEGF165 or AAV vector expressing the reporter gene β-galactosidase, as a control. Histological analysis of the specimens showed that muscle transduction by AAV vector encoding human VEGF165 resulted in enhanced tissue formation, with a significant increase in the number of arterioles within the chamber in comparison with the previously published model. Pectineus muscular flap, transduced by adeno-associated viral vectors, acted as a source of the proangiogenic factor vascular endothelial growth factor, thus inducing a consistent enhancement of vessel growth into the newly formed tissue within the chamber. In conclusion, our present findings combine three different research fields such as microsurgery, tissue engineering and gene therapy, suggesting and showing the feasibility of a mixed approach for regenerative medicine.

  19. Antibody engineering: methods and protocols

    National Research Council Canada - National Science Library

    Chames, Patrick

    2012-01-01

    "Antibody Engineering: Methods and Protocols, Second Edition was compiled to give complete and easy access to a variety of antibody engineering techniques, starting from the creation of antibody repertoires and efficient...

  20. NASA systems engineering handbook

    Science.gov (United States)

    Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; McDuffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

    1995-06-01

    This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive.

  1. Handbook of Engineering Acoustics

    CERN Document Server

    Möser, Michael

    2013-01-01

    This book examines the physical background of engineering acoustics, focusing on empirically obtained engineering experience as well as on measurement techniques and engineering methods for prognostics. Its goal is not only to describe the state of art of engineering acoustics but also to give practical help to engineers in order to solve acoustic problems. It deals with the origin, the transmission and the methods of the abating different kinds of air-borne and structure-borne sounds caused by various mechanisms – from traffic to machinery and flow-induced sound. In addition the modern aspects of room and building acoustics, as well as psychoacoustics and active noise control, are covered.

  2. Comparison between Long-Menu and Open-Ended Questions in computerized medical assessments. A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Fischer Martin R

    2006-10-01

    Full Text Available Abstract Background Long-menu questions (LMQs are viewed as an alternative method for answering open-ended questions (OEQs in computerized assessment. So far this question type and its influence on examination scores have not been studied sufficiently. However, the increasing use of computerized assessments will also lead to an increasing use of this question type. Using a summative online key feature (KF examination we evaluated whether LMQs can be compared with OEQs in regard to the level of difficulty, performance and response times. We also evaluated the content for its suitability for LMQs. Methods We randomized 146 fourth year medical students into two groups. For the purpose of this study we created 7 peer-reviewed KF-cases with a total of 25 questions. All questions had the same content in both groups, but nine questions had a different answer type. Group A answered 9 questions with an LM type, group B with an OE type. In addition to the LM answer, group A could give an OE answer if the appropriate answer was not included in the list. Results The average number of correct answers for LMQs and OEQs showed no significant difference (p = 0.93. Among all 630 LM answers only one correct term (0.32% was not included in the list of answers. The response time for LMQs did not significantly differ from that of OEQs (p = 0.65. Conclusion LMQs and OEQs do not differ significantly. Compared to standard multiple-choice questions (MCQs, the response time for LMQs and OEQs is longer. This is probably due to the fact that they require active problem solving skills and more practice. LMQs correspond more suitable to Short answer questions (SAQ then to OEQ and should only be used when the answers can be clearly phrased, using only a few, precise synonyms. LMQs can decrease cueing effects and significantly simplify the scoring in computerized assessment.

  3. Group Design Problems in Engineering Design Graphics.

    Science.gov (United States)

    Kelley, David

    2001-01-01

    Describes group design techniques used within the engineering design graphics sequence at Western Washington University. Engineering and design philosophies such as concurrent engineering place an emphasis on group collaboration for the solving of design problems. (Author/DDR)

  4. Application of precision mechanical engineering techniques to the design of a moderate energy beam transport for the FAA explosive detection system

    International Nuclear Information System (INIS)

    Lujan, R.; Christensen, K.

    1993-01-01

    This paper discusses the application of precision mounting and alignment techniques to a moderate energy beam transport system (MEBT) used on the exit of a 1.75 MeV RFQ. While frequently found in optical systems, techniques-such-as kinematic mounting, and degree-of-freedom decoupling, are not as widely used for accelerator components. The MEBT consist of one permanent magnet quadrupole, four electro magnet quadrupole, and one debuncher cavity. Included in the paper are discussions of design and fabrication considerations as well as, installation, alignment and operations experience during the successful implementation on a working accelerator

  5. Application of modern tools and techniques to maximize engineering productivity in the development of orbital operations plans for the space station progrm

    Science.gov (United States)

    Manford, J. S.; Bennett, G. R.

    1985-01-01

    The Space Station Program will incorporate analysis of operations constraints and considerations in the early design phases to avoid the need for later modifications to the Space Station for operations. The application of modern tools and administrative techniques to minimize the cost of performing effective orbital operations planning and design analysis in the preliminary design phase of the Space Station Program is discussed. Tools and techniques discussed include: approach for rigorous analysis of operations functions, use of the resources of a large computer network, and providing for efficient research and access to information.

  6. Microprocessor engineering

    CERN Document Server

    Holdsworth, B

    2013-01-01

    Microprocessor Engineering provides an insight in the structures and operating techniques of a small computer. The book is comprised of 10 chapters that deal with the various aspects of computing. The first two chapters tackle the basic arithmetic and logic processes. The third chapter covers the various memory devices, both ROM and RWM. Next, the book deals with the general architecture of microprocessor. The succeeding three chapters discuss the software aspects of machine operation, while the last remaining three chapters talk about the relationship of the microprocessor with the outside wo

  7. Web document engineering

    International Nuclear Information System (INIS)

    White, B.

    1996-05-01

    This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

  8. Software Engineering Education Directory

    Science.gov (United States)

    1990-04-01

    and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

  9. Search engine optimization

    OpenAIRE

    Marolt, Klemen

    2013-01-01

    Search engine optimization techniques, often shortened to “SEO,” should lead to first positions in organic search results. Some optimization techniques do not change over time, yet still form the basis for SEO. However, as the Internet and web design evolves dynamically, new optimization techniques flourish and flop. Thus, we looked at the most important factors that can help to improve positioning in search results. It is important to emphasize that none of the techniques can guarantee high ...

  10. Reverse engineering for quality systems

    International Nuclear Information System (INIS)

    Nolan, A.J.

    1995-01-01

    When the age of software engineering began, many companies were faced with a problem of how to support the older, pre-software-engineering, programs. The techniques of reverse engineering and re-engineering were developed to bridge the gap between the past and the present. Although reverse engineering can be used for generating missing documentation, it can also be used as a means to demonstrate quality in these older programs. This paper presents, in the form of a case study, how Rolls-Royce and Associates Limited addressed the quality issues of reverse engineering and re-engineering. (author)

  11. Healthier side dishes at restaurants: an analysis of children’s perspectives, menu content, and energy impacts

    Science.gov (United States)

    2014-01-01

    Background Children consume restaurant-prepared foods at high rates, suggesting that interventions and policies targeting consumption of these foods have the potential to improve diet quality and attenuate excess energy intake. One approach to encouraging healthier dietary intake in restaurants is to offer fruits and vegetables (FV) as side dishes, as opposed to traditional, energy-dense accompaniments like French fries. The aims of the current study were to examine: children's views about healthier side dishes at restaurants; current side dish offerings on children's menus at leading restaurants; and potential energy reductions when substituting FV side dishes in place of French fries. Methods To investigate children’s attitudes, a survey was administered to a nationally representative sample of U.S. 8- to 18-year-olds (n = 1178). To examine current side dish offerings, children's menus from leading quick service (QSR; n = 10) and full service restaurant chains (FSR; n = 10) were analyzed. Energy reductions that could result from substituting commonly-offered FV side dishes for French fries were estimated using nutrition information corresponding to the children's menu items. Results Two-thirds of children reported that they would not feel negatively about receiving FV sides instead of French fries with kids' meals. Liking/taste was the most common reason that children gave to explain their attitudes about FV side dishes. Nearly all restaurants offered at least 1 FV side dish option, but at most restaurants (60% of QSR; 70% of FSR), FV sides were never served by default. Substituting FV side dishes for French fries yielded an average estimated energy reduction of at least 170 calories. Conclusions Results highlight some healthy trends in the restaurant context, including the majority of children reporting non-negative attitudes about FV side dishes and the consistent availability of FV side dish options at leading QSR and FSR. Yet the minority of

  12. Chart context menu

    African Journals Online (AJOL)

    Algeria, 95. Australia, 5. Bahrain, 2. Belgium, 6. Benin, 1. Brazil, 10. Bulgaria, 2. Canada, 3. Chile, 3. China, 16. Côte d'Ivoire, 1. Croatia, 2. Egypt, Arab Rep. 5. Ethiopia, 2. Finland, 2. France, 7. Germany, 11. Ghana, 5. Hong Kong SAR, China, 3. India, 68. Indonesia, 2. Iran, Islamic Rep. 79. Iraq, 6. Israel, 1. Italy, 8. Jordan, 1.

  13. Chart context menu

    African Journals Online (AJOL)

    . Egypt, Arab Rep. 72. Estonia, 3. Ethiopia, 30. Fiji, 2. Finland, 12. France, 50. Germany, 66. Ghana, 4. Greece, 6. Grenada, 9. Guatemala, 2. Hong Kong SAR, China, 16. Hungary, 11. India, 297. Indonesia, 91. Iran, Islamic Rep. 106. Iraq, 10.

  14. Chart context menu

    African Journals Online (AJOL)

    Algeria, 97. Australia, 11. Azerbaijan, 5. Bahrain, 2. Belgium, 1. Benin, 4. Bolivia, 1. Brazil, 19. Canada, 15. Chile, 1. China, 22. Côte d'Ivoire, 1. Croatia, 3. Czech Republic, 5. Ecuador, 3. Egypt, Arab Rep. 8. Estonia, 1. France, 9. Germany, 4. Ghana, 4. Greece, 1. Guinea, 1. Hong Kong SAR, China, 1. Hungary, 1. India, 77.

  15. Chart context menu

    African Journals Online (AJOL)

    Korea, Republic of, 14. Latvia, 2. Libya, 6. Malaysia, 2. Mexico, 8. Netherlands, 3. New Zealand, 1. Nigeria, 20. Norway, 1. Pakistan, 6. Panama, 2. Peru, 2. Philippines, 2. Russian Federation, 2. South Africa, 2. South Sudan, 1. Spain, 6. Thailand, 4. Turkey, 4. United Arab Emirates, 1. United Kingdom, 14. United States, 51.

  16. Chart context menu

    African Journals Online (AJOL)

    Japan, 6. Korea, Republic of, 8. Libya, 19. Mexico, 8. Myanmar, 2. Netherlands, 1. New Zealand, 3. Nigeria, 10. Norway, 1. Pakistan, 3. Peru, 2. Russian Federation, 5. South Africa, 7. Spain, 1. Switzerland, 3. Taiwan, 7. Thailand, 1. Trinidad and Tobago, 2. Turkey, 10. Ukraine, 1. United Arab Emirates, 2. United Kingdom, 14.

  17. Chart context menu

    African Journals Online (AJOL)

    , 4. Saudi Arabia, 11. Singapore, 5. Slovakia (Slovak Republic), 1. South Africa, 9. Spain, 11. Sudan, 2. Sweden, 8. Syrian Arab Republic, 4. Taiwan, 6. Tanzania, 19. Thailand, 4. Tunisia, 67. Turkey, 57. Ukraine, 6. United Arab Emirates, 1.

  18. Chart context menu

    African Journals Online (AJOL)

    . France, 9. Germany, 4. Greece, 2. Hong Kong SAR, China, 2. India, 35. Indonesia ... Peru, 3. Philippines, 5. Poland, 6. Portugal, 4. Russian Federation, 2. Rwanda, 1. Serbia, 2. South Africa, 1. Spain, 8. Sri Lanka, 1. Switzerland, 6. Taiwan, 8.

  19. Chart context menu

    African Journals Online (AJOL)

    Brunei Darussalam, 1. Burkina Faso, 2. Cameroon, 1. Canada, 3. Chile, 3. China, 25. Colombia, 3. Côte d'Ivoire, 3. Denmark, 2. Ecuador, 1. Egypt, Arab Rep. 13 ... Peru, 1. Philippines, 11. Poland, 6. Portugal, 5. Puerto Rico, 1. Romania, 9. Russian Federation, 5. Saudi Arabia, 3. Senegal, 2. South Africa, 11. Spain, 4.

  20. Chart context menu

    African Journals Online (AJOL)

    Ivoire, 3. Croatia, 2. Curaçao, 1. Cyprus, 5. Czech Republic, 15. Denmark, 7. Ecuador, 3 ... Peru, 2. Philippines, 37. Poland, 11. Portugal, 22. Puerto Rico, 1. Qatar, 6. Romania, 7. Russian Federation, 17. Rwanda, 6. Saudi Arabia, 17. Senegal, 1.

  1. Chart context menu

    African Journals Online (AJOL)

    China, 4. Colombia, 4. Curaçao, 1. Ecuador, 1. Egypt, Arab Rep. 1. Ethiopia, 6. Finland, 2. France, 6. Germany, 6. Ghana, 2. Greece, 1. India, 37. Indonesia, 1. Ireland, 3. Italy, 5. Jamaica, 2. Jersey, 1. Kenya, 13. Korea, Republic of, 1. Lebanon, 1. Lesotho, 3. Malawi, 1. Malaysia, 3. Maldives, 1. Malta, 2. Mauritius, 1. Mexico, 1.

  2. Chart context menu

    African Journals Online (AJOL)

    Hong Kong SAR, China, 3. India, 18. Indonesia, 18. Iran, Islamic Rep. 14. Ireland, 1. Italy, 14. Japan, 4. Korea, Republic of, 9. Latvia, 1. Libya, 10. Lithuania, 1. Malaysia, 1. Mexico, 13. Mongolia, 1. New Zealand, 1. Nigeria, 13. Norway, 2. Pakistan, 3. Philippines, 2. Poland, 3. Romania, 2. Russian Federation, 2. Saudi Arabia ...

  3. Chart context menu

    African Journals Online (AJOL)

    Germany, 20. Ghana, 4. Greece, 3. Hong Kong SAR, China, 9. India, 72. Indonesia, 9. Iran, Islamic Rep. 73. Iraq, 2. Ireland, 1. Israel, 3. Italy, 4. Japan, 2. Jordan, 2. Kazakhstan, 1. Kenya, 3. Korea, Republic of, 8. Latvia, 1. Malaysia, 18. Maldives, 1. Mexico, 8. Morocco, 5. Netherlands, 2. New Zealand, 6. Niger, 2. Nigeria, 26.

  4. Chart context menu

    African Journals Online (AJOL)

    . 11. Italy, 5. Japan, 5. Kenya, 3. Korea, Republic of, 11. Lebanon, 1. Macedonia, 3. Malaysia, 4. Mexico, 16. Morocco, 3. Nigeria, 11. Pakistan, 7. Philippines, 2. Poland, 3. Portugal, 1. Puerto Rico, 1. Russian Federation, 2. Saudi Arabia, 1.

  5. Chart context menu

    African Journals Online (AJOL)

    France, 5. Germany, 25. Ghana, 2. Hong Kong SAR, China, 3. Hungary, 1. India, 205. Indonesia, 2. Iran, Islamic Rep. 5. Iraq, 6. Ireland, 1. Israel, 1. Italy, 2. Kenya, 11. Korea, Republic of, 1. Kuwait, 1. Lesotho, 3. Malawi, 7. Malaysia, 10. Malta, 1. Mauritius, 1. Mexico, 2. Namibia, 1. Netherlands, 8. New Zealand, 1. Nigeria, 25.

  6. Chart context menu

    African Journals Online (AJOL)

    Romania, 2. Russian Federation, 16. Saudi Arabia, 3. Senegal, 1. Singapore, 11. South Africa, 12. Spain, 1. Sri Lanka, 4. Sudan, 1. Sweden, 4. Switzerland, 1. Syrian Arab Republic, 6. Taiwan, 5. Tanzania, 3. Thailand, 15. Trinidad and Tobago, 1. Tunisia, 26. Turkey, 13. Ukraine, 31. United Arab Emirates, 4. United Kingdom ...

  7. Chart context menu

    African Journals Online (AJOL)

    Romania, 1. Russian Federation, 2. Saudi Arabia, 2. Singapore, 13. South Africa, 921. South Sudan, 1. Spain, 5. Sri Lanka, 2. Swaziland, 1. Sweden, 5. Switzerland, 3. Taiwan, 2. Tanzania, 2. Thailand, 1. Turkey, 1. Uganda, 5. Ukraine, 3. United Arab Emirates, 2. United Kingdom, 21. United States, 88. Zimbabwe, 23 ...

  8. Chart context menu

    African Journals Online (AJOL)

    Korea, Republic of, 10. Latvia, 5. Libya, 45. Malaysia, 4. Malta, 3. Mexico, 18. Namibia, 1. Nepal, 1. Netherlands, 2. New Zealand, 5. Nigeria, 44. Pakistan, 8. Peru, 3. Philippines, 3. Poland, 1. Portugal, 4. Romania, 1. Russian Federation, 2. Saudi Arabia, 2. South Africa, 3. Spain, 6. Sudan, 1. Taiwan, 3. Thailand, 3. Turkey, 7.

  9. Chart context menu

    African Journals Online (AJOL)

    Philippines, 6. Poland, 1. Portugal, 5. Romania, 1. Saint Kitts and Nevis, 2. Saudi Arabia, 4. Senegal, 4. Slovenia, 1. South Africa, 6. Spain, 4. Sri Lanka, 1. St. Kitts and Nevis, 2. Sudan, 2. Sweden, 5. Switzerland, 1. Taiwan, 27. Thailand, 2. Tunisia, 2. Turkey, 17. Ukraine, 2. United Kingdom, 35. United States, 112. Uruguay, 1.

  10. Chart context menu

    African Journals Online (AJOL)

    , 1. Netherlands, 9. Nigeria, 2. Pakistan, 2. Palestine, 1. Peru, 1. Philippines, 1. Poland, 1. Portugal, 4. Romania, 7. South Africa, 5. Sweden, 1. Switzerland, 1. Taiwan, 3. Thailand, 1. Turkey, 4. United Kingdom, 13. United States, 40. Unknown, 1 ...

  11. Chart context menu

    African Journals Online (AJOL)

    Philippines, 5. Poland, 3. Portugal, 3. Qatar, 2. Romania, 3. Russian Federation, 2. Serbia, 1. Singapore, 1. Slovakia (Slovak Republic), 2. Slovenia, 1. South Africa, 2. Spain, 14. Syrian Arab Republic, 2. Taiwan, 2. Thailand, 7. Tunisia, 6. Turkey, 16. Ukraine, 1. United Kingdom, 15. United States, 37. Zambia, 2. Zimbabwe, 1 ...

  12. Chart context menu

    African Journals Online (AJOL)

    Netherlands, 2. Nigeria, 3. Pakistan, 6. Philippines, 1. Poland, 1. Qatar, 3. Romania, 3. Russian Federation, 1. Rwanda, 1. Saudi Arabia, 5. Serbia, 7. South Africa, 4. Spain, 3. Sweden, 1. Switzerland, 1. Taiwan, 2. Thailand, 2. Turkey, 5. United Arab Emirates, 1. United Kingdom, 11. United States, 49. Unknown, 1. Uruguay, 3.

  13. Chart context menu

    African Journals Online (AJOL)

    Iran, Islamic Rep. 80. Ireland, 1. Israel, 4. Italy, 1. Japan, 7. Kenya, 3. Korea, Republic of, 10. Kuwait, 1. Lebanon, 1. Lithuania, 2. Malaysia, 12. Mauritius, 1. Mexico, 1. Montenegro, 5. Morocco, 8. Nigeria, 261. Pakistan, 5. Peru, 2. Philippines, 1. Romania, 2. Russian Federation, 17. Saudi Arabia, 1. Senegal, 1. South Africa, 9.

  14. Chart context menu

    African Journals Online (AJOL)

    Romania, 1. Russian Federation, 5. Saudi Arabia, 6. Serbia, 3. Singapore, 1. Slovenia, 4. South Africa, 4. Spain, 3. Sudan, 1. Sweden, 1. Switzerland, 3. Syrian Arab Republic, 1. Taiwan, 5. Tanzania, 3. Togo, 1. Tunisia, 18. Turkey, 23. Ukraine, 3. United Kingdom, 23. United States, 35. Unknown, 1. Vietnam, 1. Zambia, 2 ...

  15. Chart context menu

    African Journals Online (AJOL)

    Nigeria, 8. Oman, 2. Pakistan, 5. Philippines, 3. Romania, 6. Russian Federation, 3. Saudi Arabia, 13. South Africa, 4. Spain, 3. Sri Lanka, 1. Switzerland, 6. Syrian Arab Republic, 4. Taiwan, 2. Thailand, 3. Togo, 3. Tunisia, 17. Turkey, 17. Uganda, 1. Ukraine, 3. United Kingdom, 9. United States, 22. Unknown, 4. Vietnam, 1 ...

  16. Chart context menu

    African Journals Online (AJOL)

    Romania, 20. Russian Federation, 82. Rwanda, 5. Saudi Arabia, 36. Senegal, 12. Serbia, 7. Singapore, 10. Slovakia (Slovak Republic), 4. Slovenia, 5. South Africa, 59. Spain, 60. Sri Lanka, 6. Sudan, 6. Sweden, 13. Switzerland, 15. Syrian Arab Republic, 16. Taiwan, 33. Tanzania, 25. Thailand, 43. Togo, 8. Trinidad and ...

  17. Chart context menu

    African Journals Online (AJOL)

    Romania, 4. Russian Federation, 25. Rwanda, 3. Saudi Arabia, 7. Senegal, 4. Singapore, 30. South Africa, 14. Spain, 21. Sri Lanka, 4. Sweden, 1. Switzerland, 3. Syrian Arab Republic, 1. Taiwan, 4. Thailand, 18. Togo, 1. Tunisia, 58. Turkey, 31. Ukraine, 7. United Arab Emirates, 2. United Kingdom, 45. United States, 142.

  18. Chart context menu

    African Journals Online (AJOL)

    Malaysia, 2. Mexico, 14. Nepal, 1. Netherlands, 2. New Zealand, 1. Nigeria, 6. Pakistan, 4. Peru, 1. Philippines, 4. Poland, 2. Portugal, 2. Romania, 2. Russian Federation, 1. South Africa, 1. Spain, 3. Switzerland, 1. Taiwan, 6. Tanzania, 2. Thailand, 4. Turkey, 1. United Arab Emirates, 3. United Kingdom, 21. United States, 72.

  19. Chart context menu

    African Journals Online (AJOL)

    Romania, 1. Russian Federation, 1. Singapore, 9. Slovakia (Slovak Republic), 2. South Africa, 729. South Sudan, 2. Sri Lanka, 3. Swaziland, 2. Switzerland, 2. Taiwan, 1. Tanzania, 7. Thailand, 1. Trinidad and Tobago, 1. Uganda, 4. Ukraine, 2. United Kingdom, 22. United States, 64. Vietnam, 1. Zambia, 8. Zimbabwe, 16 ...

  20. Chart context menu

    African Journals Online (AJOL)

    Malaysia, 3. Mexico, 8. Morocco, 1. Netherlands, 4. Norway, 1. Peru, 5. Philippines, 1. Poland, 2. Portugal, 1. Romania, 1. Russian Federation, 4. Slovakia (Slovak Republic), 6. South Africa, 3. Spain, 6. Sweden, 3. Switzerland, 4. Taiwan, 4. Thailand, 4. Turkey, 13. Ukraine, 6. United Arab Emirates, 5. United Kingdom, 20.

  1. Chart context menu

    African Journals Online (AJOL)

    Korea, Republic of, 10. Lao People's Democratic Republic, 1. Latvia, 1. Libya, 1. Malaysia, 5. Mexico, 15. Netherlands, 5. New Zealand, 5. Nigeria, 2. Norway, 2. Pakistan, 17. Peru, 3. Philippines, 23. Portugal, 1. Romania, 2. Russian Federation, 1. Singapore, 1. Slovakia (Slovak Republic), 2. South Africa, 3. Spain, 14.

  2. Ox : Lunch Menu

    OpenAIRE

    Ox, Belfast

    2015-01-01

    In March 2013 two long standing friends, each passionate about their craft, each with a desire to bring something new to the Belfast restaurant scene combined forces and opened OX overlooking the River Lagan. Belfast-born Stephen and Brittany native Alain met while working in L’Arpège, the iconic, world-famous restaurant of radical talent Alain Passard in Paris. Having gone on to work in various other influential and inspirational restaurants they have honed their skills, developed their t...

  3. Ox : Tasting Menu

    OpenAIRE

    Ox, Belfast

    2015-01-01

    In March 2013 two long standing friends, each passionate about their craft, each with a desire to bring something new to the Belfast restaurant scene combined forces and opened OX overlooking the River Lagan. Belfast-born Stephen and Brittany native Alain met while working in L’Arpège, the iconic, world-famous restaurant of radical talent Alain Passard in Paris. Having gone on to work in various other influential and inspirational restaurants they have honed their skills, developed their t...

  4. Chart context menu

    African Journals Online (AJOL)

    Antigua and Barbuda, 2. Australia, 43. Austria, 2. Bangladesh, 1. Belgium, 5. Botswana, 3. Brazil, 5. Cameroon, 2. Canada, 45. China, 4. Colombia, 3. Czech Republic, 2. Denmark, 1. Egypt, Arab Rep. 2. Estonia, 1. Ethiopia, 7. Fiji, 1. Finland, 2. France, 2. Germany, 11. Ghana, 8. Greece, 2. Hong Kong SAR, China, 7.

  5. Chart context menu

    African Journals Online (AJOL)

    Australia, 20. Austria, 3. Bangladesh, 1. Belgium, 8. Belize, 1. Brazil, 14. Canada, 18. Chile, 1. China, 4. Colombia, 2. Croatia, 2. Cyprus, 3. Denmark, 2. Egypt, Arab Rep. 1. Estonia, 1. Ethiopia, 2. Finland, 1. France, 3. Germany, 16. Ghana, 11. Greece, 1. Guyana, 2. Hong Kong SAR, China, 4. Iceland, 1. India, 6. Indonesia, 2.

  6. Rasam Indian Restaurant: Menu

    OpenAIRE

    Rasam Indian Restaurant

    2013-01-01

    Rasam Indian Restaurant is located in the Glasthule, a suburb of Dublin and opened in 2003. The objective is to serve high quality, authentic Indian cuisine. "We blend, roast and grind our own spices daily to provide a flavour that is unique to Rasam. Cooking Indian food is founded upon long held family traditions. The secret is in the varying elements of heat and spices, the tandoor clay oven is a hugely important fixture in our kitchen. Marinated meats are lowered into the oven on long m...

  7. Astronauts' menu problem.

    Science.gov (United States)

    Lesso, W. G.; Kenyon, E.

    1972-01-01

    Consideration of the problems involved in choosing appropriate menus for astronauts carrying out SKYLAB missions lasting up to eight weeks. The problem of planning balanced menus on the basis of prepackaged food items within limitations on the intake of calories, protein, and certain elements is noted, as well as a number of other restrictions of both physical and arbitrary nature. The tailoring of a set of menus for each astronaut on the basis of subjective rankings of each food by the astronaut in terms of a 'measure of pleasure' is described, and a computer solution to this problem by means of a mixed integer programming code is presented.

  8. Chart context menu

    African Journals Online (AJOL)

    Algeria, 4. Australia, 58. Austria, 2. Bangladesh, 1. Belgium, 3. Bosnia and Herzegovina, 1. Botswana, 2. Brazil, 14. Bulgaria, 2. Canada, 25. China, 10. Colombia, 2. Costa Rica, 1. Egypt, Arab Rep. 2. Ethiopia, 4. France, 3. Germany, 10. Ghana, 3. Honduras, 1. Hong Kong SAR, China, 2. Hungary, 3. India, 12. Indonesia, 4.

  9. Chart context menu

    African Journals Online (AJOL)

    Australia, 37. Austria, 1. Belgium, 4. Botswana, 14. Brazil, 7. Cameroon, 2. Canada, 7. China, 8. Ethiopia, 18. France, 3. Germany, 10. Ghana, 2. Honduras, 1. Hong Kong SAR, China, 1. India, 28. Iran, Islamic Rep. 2. Israel, 2. Italy, 1. Jordan, 1. Kenya, 13. Latvia, 2. Lesotho, 2. Malawi, 5. Malaysia, 2. Mauritius, 3. Mexico, 1.

  10. Chart context menu

    African Journals Online (AJOL)

    Algeria, 6. Armenia, 2. Australia, 34. Austria, 4. Belgium, 28. Botswana, 20. Brazil, 14. Cabo Verde, 2. Canada, 80. China, 8. Colombia, 6. Congo, Democratic Republic, 4. Czech Republic, 12. Egypt, Arab Rep. 4. Ethiopia, 4. Finland, 6. France, 12. Germany, 24. Ghana, 20. Greece, 2. Guyana, 2. Hungary, 2. India, 34.

  11. Roughness and uniformity improvements on self-aligned quadruple patterning technique for 10nm node and beyond by wafer stress engineering

    Science.gov (United States)

    Liu, Eric; Ko, Akiteru; O'Meara, David; Mohanty, Nihar; Franke, Elliott; Pillai, Karthik; Biolsi, Peter

    2017-05-01

    Dimension shrinkage has been a major driving force in the development of integrated circuit processing over a number of decades. The Self-Aligned Quadruple Patterning (SAQP) technique is widely adapted for sub-10nm node in order to achieve the desired feature dimensions. This technique provides theoretical feasibility of multiple pitch-halving from 193nm immersion lithography by using various pattern transferring steps. The major concept of this approach is to a create spacer defined self-aligned pattern by using single lithography print. By repeating the process steps, double, quadruple, or octuple are possible to be achieved theoretically. In these small architectures, line roughness control becomes extremely important since it may contribute to a significant portion of process and device performance variations. In addition, the complexity of SAQP in terms of processing flow makes the roughness improvement indirective and ineffective. It is necessary to discover a new approach in order to improve the roughness in the current SAQP technique. In this presentation, we demonstrate a novel method to improve line roughness performances on 30nm pitch SAQP flow. We discover that the line roughness performance is strongly related to stress management. By selecting different stress level of film to be deposited onto the substrate, we can manipulate the roughness performance in line and space patterns. In addition, the impact of curvature change by applied film stress to SAQP line roughness performance is also studied. No significant correlation is found between wafer curvature and line roughness performance. We will discuss in details the step-by-step physical performances for each processing step in terms of critical dimension (CD)/ critical dimension uniformity (CDU)/line width roughness (LWR)/line edge roughness (LER). Finally, we summarize the process needed to reach the full wafer performance targets of LWR/LER in 1.07nm/1.13nm on 30nm pitch line and space pattern.

  12. Engineering Encounters: An Engineering Design Process for Early Childhood

    Science.gov (United States)

    Lottero-Perdue, Pamela; Bowditch, Michelle; Kagan, Michelle; Robinson-Cheek, Linda; Webb, Tedra; Meller, Megan; Nosek, Theresa

    2016-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information about trying (again) to engineer an egg package. Engineering is an essential part of science education, as emphasized in the "Next Generation Science Standards" (NGSS Lead States 2013). Engineering practices and performance…

  13. Biomedical Engineering Desk Reference

    CERN Document Server

    Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

    2009-01-01

    A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

  14. Metabolic Engineering VII Conference

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Korpics

    2012-12-04

    The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniques important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.

  15. Ice911 Research: A Reversible Localized Geo-Engineering Technique to Mitigate Climate Change Effects: Field Testing, Instrumentation and Climate Modeling Results

    Science.gov (United States)

    Field, L. A.; Sholtz, A.; Chetty, S.; Manzara, A.; Johnson, D.; Christodoulou, E.; Decca, R.; Walter, P.; Katuri, K.; Bhattacharyya, S.; Ivanova, D.; Mlaker, V.; Perovich, D. K.

    2017-12-01

    This work uses ecologically benign surface treatment of silica-based materials in carefully selected, limited areas to reduce polar ice melt by reflecting energy from summertime polar sun to attempt to slow ice loss due to the Ice-Albedo Feedback Effect. Application of Ice911's materials can be accomplished within a season, at a comparatively low cost, and with far less secondary environmental impact than many other proposed geo-engineering solutions. Field testing, instrumentation, safety testing, data-handling and modeling results will be presented. The albedo modification has been tested over a number of melt seasons with an evolving array of instrumentation, at multiple sites and on progressively larger scales, most recently in a small artificial pond in Minnesota and in a lake in Barrow, Alaska's BEO (Barrow Experimental Observatory) area. The test data show that the glass bubbles can provide an effective material for increasing albedo, significantly reducing the melting rate of ice. Using NCAR's CESM package the environmental impact of the approach of surface albedo modification was studied. During two separate runs, region-wide Arctic albedo modification as well as more targeted localized treatments were modeled and compared. The parameters of a surface snow layer are used as a proxy to simulate Ice911's high-albedo materials, and the modification is started in January over selected ice/snow regions in the Arctic. Preliminary results show promising possibilities of enhancements in surface albedo, sea ice area and sea-ice concentration, as well as temperature reductions of .5 to 3 degree Kelvin in the Arctic, and global average temperature reductions of .5 to 1 degrees.

  16. AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 30: PORTRAIT OF THE KHARKOV MATHEMATICIAN, MECHANICAL ENGINEER AND CYBERNETICIST VLADIMIR LOGVINOVICH RVACHEV

    Directory of Open Access Journals (Sweden)

    M. I. Baranov

    2016-03-01

    Full Text Available Purpose. Description of basic scientific achievements, features of personality and way of life of the known Kharkov mathematician, mechanical engineer and cyberneticist, academician of NAS of Ukraine Rvachev V.L .in the short form is presented. Methodology. Existent scientific approaches for treatment and systematization of mathematical knowledges, modern achievements in area of methods of direct solution of linear (nonlinear boundary problems of mechanics and mathematical physics with the scope terms of different types for the physical bodies of difficult geometrical form. Methods of historical method at research of development in society of analytical geometry, applied mathematics, classical mechanics and mathematical physics. Results. Short information is resulted about the basic creative and vital stages, and also fundamental scientific achievements of the indicated scientist-mathematician the scientific legacy of which entered in the treasure-house of world mathematical science. Are some personal qualities of this prominent soviet Ukrainian mathematician of the 20-th century, forming scientific school on the mathematical method of R−functions and leaving about itself kind memory for thankful students and descendants. Originality. First taught in 1970-th at the known mathematician of contemporaneity of Rvachev V.L. to bases of the applied mathematics and theory of R−functions by a scientist-electrophysicist from the Kharkov polytechnic institute presented for the wide circle of readers a short scientifically-historical essay about this large scientist-teacher, being based on his scientific labours, published biobibliographic materials and flashbacks of his devoted students-followers about him. Practical value. Scientific popularization of the special physical and mathematical knowledges and distinguished scientific achievements of the known Kharkov scientist-mathematician Rvachev V.L. in area of the applied mathematics, classical

  17. Nuclear techniques in hydrology

    International Nuclear Information System (INIS)

    Moser, H.

    1976-01-01

    The nuclear techniques used in hydrology are usually tracer techniques based on the use of nuclides either intentionally introduced into, or naturally present in the water. The low concentrations of these nuclides, which must be detected in groundwater and surface water, require special measurement techniques for the concentrations of radioactive or of stable nuclides. The nuclear techniques can be used most fruitfully in conjunction with conventional methods for the solution of problems in the areas of hydrology, hydrogeology and glacier hydrology. Nuclear techniques are used in practice in the areas of prospecting for water, environment protection and engineering hydrogeology. (orig.) [de

  18. A Benchmark for Banks’ Strategy in Online Presence – An Innovative Approach Based on Elements of Search Engine Optimization (SEO and Machine Learning Techniques

    Directory of Open Access Journals (Sweden)

    Camelia Elena CIOLAC

    2011-06-01

    Full Text Available This paper aims to offer a new decision tool to assist banks in evaluating their efficiency of Internet presence and in planning the IT investments towards gaining better Internet popularity. The methodology used in this paper goes beyond the simple website interface analysis and uses web crawling as a source for collecting website performance data and employed web technologies and servers. The paper complements this technical perspective with a proposed scorecard used to assess the efforts of banks in Internet presence that reflects the banks’ commitment to Internet as a distribution channel. An innovative approach based on Machine Learning Techniques, the K-Nearest Neighbor Algorithm, is proposed by the author to estimate the Internet Popularity that a bank is likely to achieve based on its size and efforts in Internet presence.

  19. Nudging Our Way to a Healthier Population: The Effect of Calorie Labeling and Self-Control on Menu Choices of Emerging Adults.

    Science.gov (United States)

    Rising, Camella J; Bol, Nadine

    2017-08-01

    Emerging adults are among those in the United States with concerning rates of overweight and obesity, putting them at risk for chronic diseases. One proposed intervention to address these issues across populations is to require that chain restaurants and similar establishments provide nutrition information, such as calorie labels, on menu items. This study therefore aims to examine the effect of menu calorie labeling and self-control on food and beverage choices of emerging adults. Results of a between-subjects experiment (n = 179) revealed that calorie labeling increased the likelihood of choosing lower calorie food and beverage options. Moreover, calorie labeling only led to selecting a lower calorie food option among those with high self-control, but not among those with low self-control. This moderating effect was not revealed for beverage choice. Public health practitioners and policymakers should consider intervention approaches that address other drivers of choice, such as self-control, in addition to nutrition information.

  20. DECHEMA annual meetings `98. Part 2. Environmental engineering, safety engineering, industrial catalysis, membrane, techniques, gasification and combustion of waste and fossil fuels, reaction techniques, innovative separation techniques: zeolites, GVC lecture series crystallization, precipitation, flocculation, solid/liquid separation; special event `patents`. Condensed papers; DECHEMA-Jahrestagungen `98. Bd. 2. Fachtreffen Umwelttechnik, Fachtreffen Sicherheitstechnik, Fachtreffen Industrielle Katalyse, Fachtreffen Membrantechnik, Fachtreffen Vergasung und Verbrennung von Abfaellen und fossilen Brennstoffen, Fachtreffen Reaktionstechnik, Fachtreffen Innovative Trenntechnik: Zeolithe, GVC-Vortragsreihe Kristallisation / Faellung / Flockung / Fest-Fluessig-Trennung, Sonderveranstaltung Patente. Kurzfassungen

    Energy Technology Data Exchange (ETDEWEB)

    Hess, C. [comp.

    1998-12-31

    In a many-sided, often interdisciplinary programme, the 1998 annual meetings of DECHEMA presented new scientific results, the current state of the art and also the persons, companies and institutions engaged in the various sectors. The major subjects of the meetings were as follows: biotechnology, environmental engineering, safety engineering, catalysis, membrane techniques, reaction techniques, gasification and combustion of waste and fossil fuels as well as separating techniques with the emphasis on zeolites and solid/liquid separation. Results reported are from work done by DECHEMA`s scientific committees and technical sections and from other projects initiated or sponsored under the aegis of DECHEMA. The contributions to solid/liquid separation stem from activities of VDI-GVC. (orig.) [Deutsch] Die DECHEMA-Jahrestagungen `98 stellen in einem vielseitigen, oft interdisziplinaeren Programm neue Ergebnisse aus der Forschung, den aktuellen Stand der Technik und nicht zuletzt auch die auf den jeweiligen Gebieten aktiven Personen, Firmen und Institutionen vor. Schwerpunkte der aktuellen Jahrestagungen bilden Biotechnologie, Umwelttechnik, Sicherheitstechnik, Katalyse, Membrantechnik, Reaktionstechnik, die Vergasung und Verbrennung von Abfaellen und fossilen Brennstoffen sowie die Trenntechnik mit den Schwerpunkten Zeolithe und Fest-Fluessig-Trennung. Damit werden Ergebnisse aus der Arbeit der DECHEMA-Forschungsausschuesse, der Fachsektionen und weiterer unter dem Dach der DECHEMA initiierter oder gefoerderter Arbeiten vorgestellt. Die Beitraege zum Thema Fest-Fluessig-Trennung entstammen Aktivitaeten innerhalb der VDI-GVC. (orig.)