WorldWideScience

Sample records for meeting innovative approaches

  1. Innovative nuclear reactor - Indian approach to meet user requirements for safety

    Saha, D.; Sinha, R.K.

    2002-01-01

    Full text: For sustainable development of nuclear energy, a number of key issues are to be addressed. It should be economically competitive; it must address the issues related to nuclear safety, proliferation resistance, environmental impact, waste disposal and cross cutting issues like social and infra-structural aspects. To compete successfully in the long term, in the highly competitive energy market and to overcome other challenges, it is necessary to introduce innovative reactor and fuel cycle concepts. Indian Advanced Heavy Water Reactor (AHWR) is one such innovative reactor. To guide the research and development activities related to innovative concepts, user requirements are to be formulated. User requirements covering various aspects of sustainable development are being formulated at both national and international levels. One such international project involved in the formulation of user requirements is the IAEA International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). This paper deals with INPRO user requirements for safety and Indian approach to meet these requirements through AHWR

  2. International Atomic Energy Agency Technical Committee Meeting, Innovative approaches to fusion energy, Pleasanton, CA, October 20-23, 1997

    Perkins, L. J.

    1997-01-01

    The Purpose of this Meeting is to provide a forum for discussion of approaches to fusion other than conventional tokamaks and stellarators, such as: (1) quasi-steady-state systems (mirrors, RFP's, spheromaks, FRC'S, spherical tori,...); (2) short-pulsed systems (liners, Z-pinch variants, plasma foci, novel ICF, ...); and (3) fusion technology innovations

  3. An Innovative Approach to Pharmacy Law Education Utilizing a Mock Board of Pharmacy Meeting

    D. Todd Bess

    2016-03-01

    Full Text Available A thorough understanding of pharmacy law by students is important in the molding of future pharmacy practitioners, but a standardized template for the best way to educate students in this area has not been created. A mock Board of Pharmacy meeting was designed and incorporated into the Pharmacy Law course at the University of Tennessee College of Pharmacy. Students acted as Board of Pharmacy members and utilized technology to decide outcomes of cases and requests addressed in a typical 2 day Tennessee Board of Pharmacy meeting. The actual responses to those cases, as well as similar cases and requests addressed over a 5 year period, were revealed to students after they made motions on mock scenarios. The mock Board of Pharmacy meeting engages the students in a way that lectures alone often fail to achieve with some initial evidence of successful student learning. Utilizing this teaching format as a law education tool challenges the status quo of pharmacy education and may serve as an impetus and catalyst for future innovations. Conflict of Interest We declare no conflicts of interest or financial interests that the authors or members of their immediate families have in any product or service discussed in the manuscript, including grants (pending or received, employment, gifts, stock holdings or options, honoraria, consultancies, expert testimony, patents, and royalties. Dr. Wang’s time was partly supported by the National Institute on Aging of the National Institutes of Health under Award Number R01AG040146 and R01AG049696. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health.   Type: Idea Paper

  4. Approaching Service Innovation Patterns

    Andrea NAGY

    2013-01-01

    The present paper aims at analyzing the types of innovation in the field of services. First, the concept of innovation is defined and second, field literature is reviewed from the perspective of service innovation. The main types of innovation are identified based on several attempts at defining innovation, the most notable being Schumpeter’s. Thus, it is possible to approach concepts such as product and process innovation, incremental and radical innovation. Another aim has been to regard se...

  5. Innovation meets entrepreneurship

    Andrew Purcell

    2015-01-01

    On Thursday 26 November, CERN openlab hosted an event on innovation and entrepreneurship. It was organised in collaboration with the CERN Knowledge Transfer Group and IdeaSquare.   Attended by 80 people, the event featured talks on commercialisation, public-private partnership, intellectual property, and other related topics. The participants also had the opportunity to discuss their own business ideas one-to-one with invited experts, who provided tailored advice. The event was supported by CERN openlab partner company Intel as part of a joint project on innovation and entrepreneurship. More information about the event is available here.

  6. Realistic Approach to Innovation.

    Dawson, Garth C.

    Part of the Omaha police in-service training program was devoted to innovative approaches to solving police department problems and improving community relations. The sessions were an attempt to use the brainstorming technique to elicit new solutions to everyday problems faced by the rank-and-file members of the police department. The report…

  7. Innovative small and medium sized reactors: Design features, safety approaches and R and D trends. Final report of a technical meeting

    2005-05-01

    In order to beat the economy of scale small and medium sized reactors (SMRs) have to incorporate specific design features that result into simplification of the overall plant design, modularization and mass production. Several approaches are being under development and consideration, including the increased use of passive features for reactivity control and reactor shut down, decay heat removal and core cooling, and reliance on the increased margin to fuel failure achieved through the use of advanced high-temperature fuel forms and structural materials. Some SMRs also offer the possibility of very long core lifetimes with burnable absorbers or high conversion ratio in the core. These reactors incorporate increased proliferation resistance and may offer a very attractive solution for the implementation of adequate safeguards in a scenario of global deployment of nuclear power. About 50 concepts and designs of the innovative SMRs are under development in more than 15 IAEA Member States representing both industrialized and developing countries. SMRs are under development for all principle reactor lines, i.e., water cooled, liquid metal cooled, gas cooled, and molten salt cooled reactors, as well as for some non-conventional combinations thereof. Upon a diversity of the conceptual and design approaches to SMRs, it may be useful to identify the so-called enabling technologies that are common to certain reactor types or lines. An enabling technology is the technology that needs to be developed and demonstrated to make a certain reactor concept viable. When a certain technology is common to several SMR concepts or designs, it could benefit from being developed on a common or shared basis. The identification of common enabling technologies could speed up the development and deployment of many SMRs by merging the efforts of their designers through an increased international cooperation. This publication has been prepared through the collaboration of all participants of this

  8. Innovative Governance Strategies in Meetings Destination Networks

    Gyimóthy, Szilvia; Larson, Mia

    2013-01-01

    Innovative Governance Strategies in Meetings Destination Networks Introduction, problem statement and aims of the study Collaborative regional networks has been long considered as a must in successful tourism development (Dredge & Jenkins 2003) owing to benefits such as scale and scope economics......, as well as joint planning and coordination of supply facilities. However, the setting up and governance of destination networks is paved with managerial challenges, including, among others: the balancing of conflicting stakeholder interest (Wilkinson & March 2008), and bridging over the gap between...... the bureaucratic culture of public administration and the marketing culture adopted by private tourism firms (Palmer 1996). This regional coordinating role must be undertaken in spite of limited ownership, budget or power to control how individual firms deliver (D’Angella & Go 2007). Furthermore, various actors...

  9. Innovative approach towards understanding optics

    Garg, Amit; Bharadwaj, Sadashiv Raj; Kumar, Raj; Shudhanshu, Avinash Kumar; Verma, Deepak Kumar

    2016-01-01

    Over the last few years, there has been a decline in the students’ interest towards Science and Optics. Use of technology in the form of various types of sensors and data acquisition systems has come as a saviour. Till date, manual routine tools and techniques are used to perform various experimental procedures in most of the science/optics laboratories in our country. The manual tools are cumbersome whereas the automated ones are costly. It does not enthuse young researchers towards the science laboratories. There is a need to develop applications which can be easily integrated, tailored at school and undergraduate level laboratories and are economical at the same time. Equipments with advanced technologies are available but they are uneconomical and have complicated working principle with a black box approach. The present work describes development of portable tools and applications which are user-friendly. This is being implemented using open-source physical computing platform based on a simple low cost microcontroller board and a development environment for writing software. The present paper reports the development of an automated spectrometer, an instrument used in almost all optics experiments at undergraduate level, and students’ response to this innovation. These tools will inspire young researchers towards science and facilitate development of advance low cost equipments making life easier for Indian as well as developing nations. (paper)

  10. Barriers Approach to Innovation in Academic Libraries

    Fu-Hsuan Chuang

    2016-11-01

    Full Text Available Innovation in academic libraries is not a brand new issue. Academic libraries can benefit from successful innovation, since innovation is a key contributor to gaining and sustaining competitive advantage for survival. Building on two case studies, 28 participants from leadership teams to practitioners are involved, the qualitative findings identified the specific two types of barriers that academic libraries face by applying a barriers approach to innovation, that’s, environmental and organizational barriers. Especially, seven dimensions of two types of barriers to innovation are found.

  11. Classification of innovations: approaches and consequences

    Jakub Tabas

    2011-01-01

    Full Text Available Currently, innovations are perceived as a life blood of businesses. The inevitable fact is that even if the innovations have a potential to transform the companies or all the industries, the innovations are high risky. Even though, the second fact is that in order to companies’ development and their survival on the markets, the innovations have become the necessity. In the theory, it is rather difficult to find a comprehensive definition of innovation, and to settle down a general definition of innovation becomes more and more difficult with the growing number of domains where the innovations, or possible innovations start to appear in a form of added value to something that already exist. Definition of innovation has come through a long process of development; from early definition of Schumpeter who has connected innovation especially with changes in products or production processes, to recent definitions based on the added value for a society. One of possible approaches to define the content of innovation is to base the definition on classification of innovation. In the article, the authors provide the analysis of existing classifications of innovations in order to find, respectively in order to define the general content of innovation that would confirm (or reject their definition of innovation derived in the frame of their previous work where they state that innovation is a change that leads to gaining profit for an individual, for business entity, or for society, while the profit is not only the accounting one, but it is the economic profit.The article is based especially on the secondary research while the authors employ the method of analysis with the aim to confront various classification-based definitions of innovation. Then the methods used are especially comparison, analysis and synthesis.

  12. An experiential approach for innovation

    Jensen, Jesper Legaard

    2012-01-01

    This paper explores innovation in relation to product design, with an emphasis on designing for experiences. In the paper I introduce an experiential model called the “Peel model”, and showcase how it can be applied as a tool for innovation. The Peel model depicts different layers of a product......, and transferred that concept to other product types, generating ideas about how a lamp, for instance, could provide a similar experience. The introduced Peel model is intended to be beneficial at an operational level for designers, project managers, business executives etc. as a tool to guide the innovation...

  13. 77 FR 31567 - The National Advisory Council on Innovation and Entrepreneurship; Meeting of the National...

    2012-05-29

    ... Innovation and Entrepreneurship; Meeting of the National Advisory Council on Innovation and Entrepreneurship... Council on Innovation and Entrepreneurship will hold a meeting on Tuesday, June 12, 2012. The open meeting... to innovation and entrepreneurship in the United States. DATES: June 12, 2012. Time: 10:00 a.m.-2:00...

  14. 78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    2013-11-27

    ... of the Technology and Innovation Committee (TIC) of the NASA Advisory Council (NAC). The meeting will... Propellant Storage and Transfer; and a discussion of barriers to innovation and innovation enablers. DATES... Barriers to Innovation and Innovation Enablers The meeting will be open to the public up to the seating...

  15. Blended Learning: An Innovative Approach

    Lalima; Dangwal, Kiran Lata

    2017-01-01

    Blended learning is an innovative concept that embraces the advantages of both traditional teaching in the classroom and ICT supported learning including both offline learning and online learning. It has scope for collaborative learning; constructive learning and computer assisted learning (CAI). Blended learning needs rigorous efforts, right…

  16. Innovation in Developing Countries - a New Approach

    Dagmara Bubel

    2015-05-01

    Full Text Available Currently the enterprises’ development and competitive positions are determined by innovation. The importance of innovation in corporate management is a result of changes in corporate environment, as well as of preferences and changing needs of customers. These changes are accompanied by a new approach to innovation: they are no longer limited to developed countries, but also emerge in developing countries. Moreover, a reverse in the direction of innovations occurs, which means that developing countries are often not only the recipients of innovative products, but also creators and „exporters”. Given the current trends, the paper begins with the concept of innovation and deals with the subject of innovation in developing countries. The conclusion of the paper presents examples of innovative solutions originated from Poland. Although Poland ranks rather „tail end” in innovation rankings, but also deliver products that have a good chance to conquer the global market. By highlighting the importance of this reverse innovative trend, this article provides the conceptual grounds for further systematic research.

  17. Innovative Approaches to Large Component Packaging

    Freitag, A.; Hooper, M.; Posivak, E.; Sullivan, J.

    2006-01-01

    Radioactive waste disposal often times requires creative approaches in packaging design, especially for large components. Innovative design techniques are required to meet the needs for handling, transporting, and disposing of these large packages. Large components (i.e., Reactor Pressure Vessel (RPV) heads and even RPVs themselves) require special packaging for shielding and contamination control, as well as for transport and disposal. WMG Inc designed and used standard packaging for RPV heads without control rod drive mechanisms (CRDMs) attached for five RPV heads and has also more recently met an even bigger challenge and developed the innovative Intact Vessel Head Transport System (IVHTS) for RPV heads with CRDMs intact. This packaging system has been given a manufacturer's exemption by the United States Department of Transportation (USDOT) for packaging RPV heads. The IVHTS packaging has now been successfully used at two commercial nuclear power plants. Another example of innovative packaging is the large component packaging that WMG designed, fabricated, and utilized at the West Valley Demonstration Project (WVDP). In 2002, West Valley's high-level waste vitrification process was shut down in preparation for D and D of the West Valley Vitrification Facility. Three of the major components of concern within the Vitrification Facility were the Melter, the Concentrate Feed Makeup Tank (CFMT), and the Melter Feed Holdup Tank (MFHT). The removal, packaging, and disposition of these three components presented significant radiological and handling challenges for the project. WMG designed, fabricated, and installed special packaging for the transport and disposal of each of these three components, which eliminated an otherwise time intensive and costly segmentation process that WVDP was considering. Finally, WMG has also designed and fabricated special packaging for both the Connecticut Yankee (CY) and San Onofre Nuclear Generating Station (SONGS) RPVs. This paper

  18. FUTURE TEACHERS TRAINING TO INNOVATIVE PEDAGOGICAL ACTIVITY: CONTEXT APPROACH

    Shevchenko L.

    2017-03-01

    Full Text Available The innovative processes in education arose in different historical periods and determined its development. The analysis of theoretical and experimental studies showed that now the teachers have difficulty in developing and implementing innovative technologies, choosing the most appropriate pedagogical methods and assets. The widespread innovations lead to changes in future teachers’ training to the professional activity. The leading objective of higher pedagogical education is to train teacher who has the developed personal and professional skills, able to perform innovative teaching activity. The achievement of this strategic objective requires the organization of targeted training of future teachers to innovative pedagogical activity in terms of higher education system, promoting their professional and personal growth, the formation of innovative capacity and innovative culture. In this regard, there is a need to find approaches to education that are focused on the future content of professional activity. In our opinion, these requirements fully meet the contextual approach that provides consistent, continuous and systematic formation of future teachers’ readiness to innovative pedagogical activity. The this article we analyzed the features of the training of future teachers to innovative pedagogical activity; identified the possibilities of contextual education application in pedagogical institutions; considered the survey results of the beginning teachers of secondary and vocational schools; defined a number of innovative forms, methods and technologies for implementing the contextual education system thet allow combining educational, quasi professional and educational-professional activity, such as: design and usage of electronic educational resources, electronic teaching methods; engaging students into self-educational activity by means of Web services; fulfillment of individual and group projects based on Web and Blog-quests in which

  19. 76 FR 31582 - The National Advisory Council on Innovation and Entrepreneurship; Meeting of the National...

    2011-06-01

    ..., the growth of businesses, and collaborative efforts to spur commercialization and regional innovation... DEPARTMENT OF COMMERCE Economic Development Administration The National Advisory Council on Innovation and Entrepreneurship; Meeting of the National Advisory Council on Innovation and Entrepreneurship...

  20. The Systems Approach to Innovation Studies

    Karen Manley

    2002-05-01

    Full Text Available The academic literature, and business practice, reveals a shift in the way analysts understand innovation processes. This shift is not revealed as a cohesive trend, rather it comprises contributions from a wide range of academic disciplines and empirical evidence. Building on Edquist (1997 this paper ties together the diverse new ideas which stress a systems approach to successful innovation. The paper presents an up-to-date overview of this fast moving field, with a view to assisting public policy makers and business managers in designing more effective innovation processes.

  1. Systematic Approach for Development of Innovative Infrastructure

    Zarema Muhamedova

    2014-07-01

    Full Text Available The necessity for development of innovative infrastructure is proved. Its nature, reasonability of systematic approach use and purpose has been identified. The author suggests considering the regime of infrastructural provision aimed at offering horizontal and vertical integration of institutions. This model is designed to create and integral complex for innovative support. The grounds of establishment the state politics are identified. The conceptual recommendations on its development and formation of relevant model, strategy and regulatory mechanism are outlined.

  2. 76 FR 11424 - Meeting of the National Advisory Council on Innovation and Entrepreneurship

    2011-03-02

    ... Advisory Council on Innovation and Entrepreneurship AGENCY: Office of Innovation and Entrepreneurship, U.S... Innovation and Entrepreneurship will hold a meeting on Tuesday, March 15, 2011. The meeting will be conducted... Secretary of Commerce on matters relating to innovation and entrepreneurship in the United States. DATE...

  3. 76 FR 73587 - The National Advisory Council on Innovation and Entrepreneurship: Meeting of the National...

    2011-11-29

    ... Innovation and Entrepreneurship: Meeting of the National Advisory Council on Innovation and Entrepreneurship... Council on Innovation and Entrepreneurship will hold a meeting on Tuesday, December 13, 2011. The open... the Secretary of Commerce on matters relating to innovation and entrepreneurship in the United States...

  4. Training Package Implementation: Innovative and Flexible Approaches.

    Meyers, Dave; Blom, Kaaren

    The implementation of training packages (TPs) in Australian workplaces was examined through case studies of the use of TPs in nontraditional trade areas by six innovative registered training organizations (RTOs) across Australia. The study focused on the extent to which new and flexible approaches to learning, training delivery, and assessment…

  5. Applying open source innovation approaches in developing business innovation

    Aagaard, Annabeth; Lindgren, Peter

    2015-01-01

    and managed effectively in developing business model innovation. The aim of this paper is therefore to close this research gap and to provide new knowledge within the research field of OI and OI applications. Thus, in the present study we explore the facilitation and management of open source innovation...... in developing business model innovation in the context of an international OI contest across five international case companies. The findings reveal six categories of key antecedents in effective facilitation and management of OI in developing business model innovation.......More and more companies are pursuing continuous innovation through different types of open source innovation and across different partners. The growing interest in open innovation (OI) originates both from the academic community as well as amongst practitioners motivating further investigation...

  6. A unified innovation approach to emerging markets

    Agarwal, Nivedita; Brem, Alexander; Grottke, Michael

    2014-01-01

    for emerging markets (2) and establish relative importance of key factors for product managers while conceptualizing a new product for emerging markets. In the first part, the study assembles the list of characteristics from the selected innovation theories revolving around emerging markets. Subsequently...... the overarching innovation approach for emerging markets and provides a common definition for a product considered relevant for emerging market. The results show high prioritization given to cost effective, easy to use and problem centric as compared to the sustainability, no-frills, resourceful, breakthrough...... and fast-to-market factors by product managers. However, the paper acknowledges that the prioritization results are subject to change given different motivation behind the various theories. Finally the paper proposes that, the eight key factors required factors to “play in” emerging markets would...

  7. 78 FR 12799 - Advisory Committee for Innovation Corps; Notice of Meeting; Correction

    2013-02-25

    ... announcing a meeting of the Advisory Committee for Innovation Corps. The location and time of the business meeting are updated to reflect the accurate plans. In accordance with the Federal Advisory Committee Act...

  8. China's indigenous innovation approach: the emergence of Chinese innovation theory?

    Vinig, T.; Bossink, B.A.G.

    2015-01-01

    Theory-driven and theory-based studies on innovation in China are relatively scarce. Most innovation studies about Chinese business are based on Chinese policy and government programmes and their results. This special issue of Technology Analysis and Strategic Management explores China's indigenous

  9. 76 FR 54426 - Meeting of the National Advisory Council on Innovation and Entrepreneurship

    2011-09-01

    ... Council on Innovation and Entrepreneurship AGENCY: Economic Development Administration, U.S. Department of... Entrepreneurship will hold a meeting on Tuesday, Sept 13, 2011. The open meeting will be conducted from 10 a.m. to... Secretary of Commerce on matters relating to innovation and entrepreneurship in the United States. DATES...

  10. 77 FR 55182 - Meeting of the National Advisory Council on Innovation and Entrepreneurship

    2012-09-07

    ... Council on Innovation and Entrepreneurship AGENCY: Economic Development Administration, U.S. Department of... Entrepreneurship will hold a meeting on Tuesday, September 11, 2012. The open meeting will be held from 10 a.m.-2 p... November 10, 2009 to advise the Secretary of Commerce on matter related to innovation and entrepreneurship...

  11. 76 FR 22078 - Meeting of the National Advisory Council on Innovation and Entrepreneurship

    2011-04-20

    ... DEPARTMENT OF COMMERCE Meeting of the National Advisory Council on Innovation and Entrepreneurship... Advisory Council on Innovation and Entrepreneurship will hold a phone conference on Monday, May 3, 2011... matters relating to innovation and entrepreneurship in the United States. DATES: May 3, 2011. Time: 2 p.m...

  12. Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

    Still, Dean K [Aprovecho Research Center, Cottage Grove, OR (United States); Hatfield, Micheal S [Aprovecho Research Center, Cottage Grove, OR (United States)

    2015-12-15

    Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards. Protecting public health has become a major motivation for investigating how improved cook stoves might function as a viable intervention. Currently, the great majority of cookstoves for sale in the developing world were not designed for this purpose but instead success was based on criteria such as reduced fuel use, affordability, and ease of use. With DOE funding Aprovecho Research Center spent three years creating stoves using an iterative development and modeling approach resulting in four stoves that in lab tests met the World Health Organization (2014) intermediate rate vented targets for PM2.5 and for CO.

  13. Proceedings of Task Force Meeting "Human Factors in Innovation Management". Helsinki, 9-14 October, 1983

    Vasko, T.; Goncharov, V.

    1984-01-01

    These proceedings from the IIASA Task Force Meeting held in Helsinki from 9-14 October, 1983 reflect the wide spectrum of interests and experiences of the participants. The main topic -- Human Factors in Innovation Management -- was singled out as a potential focus early in the life of the Innovation Management Project. Preliminary meetings had already indicated how internally structured this topic could be. Intentionally, no attempts were made to limit the scope of the meeting, as the object...

  14. Innovating Without Information Constraints: Organizations, Communities, and Innovation When Information Costs Approach Zero

    Elizabeth J. Altman; Frank Nagle; Michael L. Tushman

    2013-01-01

    Innovation traditionally takes place within an organization's boundaries and with selected partners. This Chandlerian approach is rooted in transaction costs, organizational boundaries, and information challenges. Information processing, storage, and communication costs have been an important constraint on innovation and a reason why innovation takes place inside the organization. However, exponential technological progress is dramatically decreasing information constraints, and in many conte...

  15. Corporate governance and innovation : A conceptual approach

    Postma, T.J.B.M.; van Ees, H.; Chai, K.H.; Hang, C.C.; Xie, M.

    2006-01-01

    This paper deals with the relationship between innovation and corporate governance. Corporate governance is relevant for innovation, because the characteristics of innovative investment strategies are dependent on the incentives and abilities of the stakeholders who are in control. The purpose of

  16. The Trialogical Learning Approach to innovate teaching

    Nadia Sansone

    2016-11-01

    Full Text Available This article focuses on a case of implementing the Trialogical Learning Approach (TLA in two classes in the first year of a university school for future osteopaths (N = 36. The approach involves the creation of useful and tangible objects through alternation between individual and group activities, supported by digital technologies. The aim of the study is to observe the impact of TLA on the quality of learning products made by students and on teaching style, as well as to collect students’ views on activities. The collected data (individual and group products, notes inserted online, audio recordings of lessons, final questionnaires have been analyzed using a mixed qualitative and quantitative approach. The results show: a positive evolution in the quality of individual and group products; b progression from a transmissive teaching style towards one more oriented to collaboration and knowledge building; c general appreciation of the innovative method and its potential for fostering social skills useful for future employment.

  17. 77 FR 64561 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    2012-10-22

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-083] NASA Advisory Council; Technology...: Notice of meeting. SUMMARY: The National Aeronautics and Space Administration (NASA) announces a meeting of the Technology and Innovation Committee of the NASA Advisory Council (NAC). The meeting will be...

  18. Success Determination by Innovation: A Theoretical Approach in Marketing

    Raj Kumar Gautam

    2012-01-01

    The paper aims at to identify the main issues in the marketing which needs immediate attention of the marketers. The importance of innovation in the marketing has also been highlighted and marketing mix have been related to innovative and creative ideas. The study is based on the secondary data, various research papers, articles has been studied to develop a innovative approach in the marketing. Marketing innovative ideas relating to business lead generation, product, price, distribution, pro...

  19. Innovation

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  20. Innovative Approaches to Improve Anti-Infective Vaccine Efficacy.

    Yeaman, Michael R; Hennessey, John P

    2017-01-06

    Safe and efficacious vaccines are arguably the most successful medical interventions of all time. Yet the ongoing discovery of new pathogens, along with emergence of antibiotic-resistant pathogens and a burgeoning population at risk of such infections, imposes unprecedented public health challenges. To meet these challenges, innovative strategies to discover and develop new or improved anti-infective vaccines are necessary. These approaches must intersect the most meaningful insights into protective immunity and advanced technologies with capabilities to deliver immunogens for optimal immune protection. This goal is considered through several recent advances in host-pathogen relationships, conceptual strides in vaccinology, and emerging technologies. Given a clear and growing risk of pandemic disease should the threat of infection go unmet, developing vaccines that optimize protective immunity against high-priority and antibiotic-resistant pathogens represents an urgent and unifying imperative.

  1. Splinting of Longitudinal Fracture: An Innovative Approach

    Rashmi Bansal

    2016-01-01

    Full Text Available Trauma may result in craze lines on the enamel surface, one or more fractured cusps of posterior teeth, cracked tooth syndrome, splitting of posterior teeth, and vertical fracture of root. Out of these, management of some fractures is of great challenge and such teeth are generally recommended for extraction. Literature search reveals attempts to manage such fractures by full cast crown, orthodontic wires, and so forth, in which consideration was given to extracoronal splinting only. However, due to advancement in materials and technologies, intracoronal splinting can be achieved as well. In this case report, longitudinal fractures in tooth #27, tooth #37, and tooth #46 had occurred. In #27, fracture line was running mesiodistally involving the pulpal floor resulting in a split tooth. In teeth 37 and 46, fractures of the mesiobuccal cusp and mesiolingual cusp were observed, respectively. They were restored with cast gold inlay and full cast crown, respectively. Longitudinal fracture of 27 was treated with an innovative approach using intracanal reinforced composite with Ribbond, external reinforcement with an orthodontic band, and full cast metal crown to splint the split tooth.

  2. Conceptualising Educational Changes: A Social Innovation Approach

    Loogma, Krista; Tafel-Viia, Külliki; Ümarik, Meril

    2013-01-01

    The intention of the authors in this article is to contribute to the discussion concerning educational change by implementing the concept of social innovation. We argue that the application of the concept of social innovation makes it possible to better understand the process of implementation as well as sustainability and the social impact of…

  3. Innovation and design approaches within prospective ergonomics.

    Liem, André; Brangier, Eric

    2012-01-01

    In this conceptual article the topic of "Prospective Ergonomics" will be discussed within the context of innovation, design thinking and design processes & methods. Design thinking is essentially a human-centred innovation process that emphasises observation, collaboration, interpretation, visualisation of ideas, rapid concept prototyping and concurrent business analysis, which ultimately influences innovation and business strategy. The objective of this project is to develop a roadmap for innovation, involving consumers, designers and business people in an integrative process, which can be applied to product, service and business design. A theoretical structure comprising of Innovation perspectives (1), Worldviews supported by rationalist-historicist and empirical-idealistic dimensions (2) and Models of "design" reasoning (3) precedes the development and classification of existing methods as well as the introduction of new ones.

  4. When Regional Innovation Policies Meet Policy Rationales and Evidence:

    Borrás, Susana; Jordana, Jacint

    regions, and to understand how rationales and evidence can be translated into policy-making. To this purpose, this paper develops a framework to study the extent to which regional innovation policies have changed during the past few years. Since the mid-2000s there has been an important development......In spite of recent advancements regarding regional innovation policy rationales and evidence, there are few analyses about the actual features of existing regional innovation policies. Nevertheless, a policy analysis perspective is important in order to recognise their distinctive patterns across...... of innovation policy rationales, advocating for more specialisation; likewise, greater data availability at the regional level has allowed more sophisticated assessment of innovation performance. Finally, the crisis since 2008 has had ravaging effects in some regions, with job losses and severe economic...

  5. When Regional Innovation Policies Meet Policy Rationales and Evidence

    Borrás, Susana; Jordana, Jacint

    2016-01-01

    regions, and to understand how rationales and evidence can be translated into policy-making. To this purpose, this paper develops a framework to study the extent to which regional innovation policies have changed during the past few years. Since the mid-2000s, there has been an important development......In spite of recent advancements regarding regional innovation policy rationales and evidence, there are few analyses about the actual features of existing regional innovation policies. Nevertheless, a policy analysis perspective is important in order to recognize their distinctive patterns across...... of innovation policy rationales, advocating for more specialization; likewise, greater data availability at the regional level has allowed more sophisticated assessment of innovation performance. Finally, the crisis since 2008 has had ravaging effects in some regions, with job losses and severe economic...

  6. System approach to machine building enterprise innovative activity management

    І.V. Levytska

    2016-12-01

    Full Text Available The company, which operates in a challenging competitive environment should focus on new products and provide innovative services that enhance their innovation to maintain the company’s market position. The article deals with the peculiarities of such an activity in the company. The authors analyze the various approaches used in the management, and supply the advantages and disadvantages of each. It is determine that the most optimal approach among them is a system approach. The definition of the consepts "a system" and "a systematic approach to innovative activity management" are suggested. The article works out the system of machine building enterprise innovative activity management, the organization of machine building enterprise innovative activity; the planning of machine building enterprise innovative activity; the control in the system of machine building enterprise innovative activity management; the elements of the control subsystem. The properties, typical for the system of innovative management, are supplied. The managers, engaged in enterprise innovative activity management, must perform a number of the suggested tasks, which affect the efficiency of the enterprise as a whole. These exact tasks are performed using the systematic approach, providing the enterprise competitive operation and quick adaptation to changes in the external environment.

  7. 76 FR 7222 - Medical Device Innovation Initiative; Public Meeting; Request for Comments

    2011-02-09

    ... public meeting will be provided on a space-available basis beginning at 7 a.m. Non-U.S. citizens are... The United States is the global leader in medical device innovation and CDRH is committed to assuring... public health. CDRH is responsible for advancing public health and facilitating innovation to help bring...

  8. Innovation by the wind power industry to meet government requirements

    Badger, D.

    2001-01-01

    This introductory paper to the Conference summarises suggestions for innovation in the wind power industry generally. Such innovation is needed as governments world-wide grapple with the demands of abating fossil fuel use in the face of the threat of Global Climate Change. As the major sponsor of the BWEA 22 Conference, Enron Wind Corp is conscious of the corporate responsibility of the modern wind power industry. (Author)

  9. 75 FR 4110 - NASA Advisory Council; Technology and Innovation Committee; Meeting.

    2010-01-26

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-010)] NASA Advisory Council; Technology... amended, the National Aeronautics and Space Administration (NASA) announce a meeting of the newly formed Technology and Innovation Committee of the NASA Advisory Council (NAC). This will be the first meeting of...

  10. MARKETING AND INNOVATION – A RELATIONSHIP APPROACH

    Rodica Boier

    2014-12-01

    Full Text Available This paper deals with innovation from a relationship marketing perspective, the company's ability to maintain interactions with its stakeholders, to take advantage from the information achieved, and this way to create new products and generate loyalty through customer satisfaction. The analysis of innovation from a relationship establishment standpoint can only be viewed interdisciplinary at its core, with research and development, design, management, and marketing being symbiotically combined, with focus on stakeholders’ involvement. The paper reviwes the most significat literature in the area. There is a two-way connection between relationship marketing and innovation. On one hand, the newly launched product, conceived together with the stakeholders, is likely to generate satisfaction and, hence, customer loyalty and retention, with all known positive consequences. On the other hand, the repeated satisfaction felt by the stakeholder encourages him to expect even more from the innovative organization in what concerns the successfully launched new products. This way, the effective stakeholder involvement in the value creation process provides a strong basis for further innovation.

  11. Theoretical approaches to social innovation – A critical literature review

    Butzin, A.; Davis, A.; Domanski, D.; Dhondt, S.; Howaldt, J.; Kaletka, C.; Kesselring, A.; Kopp, R.; Millard, J.; Oeij, P.; Rehfeld, D.; Schaper-Rinkel, P.; Schwartz, M.; Scoppetta, A.; Wagner-Luptacik, P.; Weber, M.

    2014-01-01

    The SI-DRIVE report “Theoretical approaches to Social Innovation – A Critical Literature Review” delivers a comprehensive overview on the state of the art of theoretically relevant building blocks for advancing a theoretical understanding of social innovation. It collects different theoretical

  12. R&D, patents and innovation: a differential game approach

    Wang, H.-M.

    2016-01-01

    A patent race is a technological competition among firms and the firm making a first-hand innovation takes advantages of patenting. Firms strategically invest in R&D and produce knowledge in order to innovate. Instead of growing model of R&D, I use a differential game approach to investigate firms

  13. Success Determination by Innovation: A Theoretical Approach in Marketing

    Raj Kumar Gautam

    2012-10-01

    Full Text Available The paper aims at to identify the main issues in the marketing which needs immediate attention of the marketers. The importance of innovation in the marketing has also been highlighted and marketing mix have been related to innovative and creative ideas. The study is based on the secondary data, various research papers, articles has been studied to develop a innovative approach in the marketing. Marketing innovative ideas relating to business lead generation, product, price, distribution, promotion of product, and revenue generation have been highlighted in the paper. All the suggestions are theoretical and may have relevance and implication to the marketers.

  14. Success Determination by Innovation: A Theoretical Approach in Marketing

    Raj Kumar Gautam

    2012-11-01

    Full Text Available The paper aims at to identify the main issues in the marketing which needs immediate attention of the marketers. The importance of innovation in the marketing has also been highlighted and marketing mix have been related to innovative and creative ideas. The study is based on the secondary data, various research papers, articles has been studied to develop a innovative approach in the marketing. Marketing innovative ideas relating to business lead generation, product, price, distribution, promotion of product, and revenue generation have been highlighted in the paper. All the suggestions are theoretical and may have relevance and implication to the marketers.

  15. A radical approach to radical innovation

    D. Deichmann (Dirk); J.C.M. van den Ende (Jan)

    2014-01-01

    textabstractInnovation pays. Amazon, Apple, Facebook, Google – nearly every one of today’s most successful companies has a talent for developing radical new ideas. But how best to encourage radical initiative taking from employees, and does their previous success or failure at it play a role?

  16. Innovative Approach to Senior Practicum Students.

    Golightly, Melissa; Kennett, Natalie; Stout, Jacqueline A

    2017-12-01

    Traditional senior practicum experiences (SPEs) are microsystem based-they allow senior nursing students the opportunity to build professional nursing competencies as they transition into practice. As health care transformation continues unabated, there is a need to work toward closing the gap between nursing academia and nursing practice. A cardiovascular service line created an innovative SPE to better prepare senior nursing students for working as professional nurses in a service line model. The Senior Practicum Immersion Experience (SPIE) proved to be beneficial to senior practicum students and offered firsthand experience of the role professional nurses play in a service line model. This model increased the number of senior practicum students accepted into the cardiac service line by 50%. The SPIE creates an innovative solution to increasing the number of senior practicum students while allowing students the ability to learn and practice in a service line model. [J Nurs Educ. 2017;56(12):745-747.]. Copyright 2017, SLACK Incorporated.

  17. Adapting the innovation systems approach to agricultural development in Vietnam

    Friederichsen, Rupert; Thai, Thi Minh; Neef, Andreas

    2013-01-01

    into the still-dominant transfer of technology model. We show how extensionists draw selectively on these diverse discourses to foster interaction with outsiders and clients, and bolster their livelihood strategies. We conclude that the conceptual framework suggested by the innovation systems (IS) approach......Competing models of innovation informing agricultural extension, such as transfer of technology, participatory extension and technology development, and innovation systems have been proposed over the last decades. These approaches are often presented as antagonistic or even mutually exclusive....... This article shows how practitioners in a rural innovation system draw on different aspects of all three models, while creating a distinct local practice and discourse. We revisit and deepen the critique of Vietnam’s “model” approach to upland rural development, voiced a decade ago in this journal. Our...

  18. Expert Meeting Report: Key Innovations for Adding Energy Efficiency to Maintenance Projects

    Wood, A.; Wiehagen, J.

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic, Key Innovations for Adding Energy Efficiency to Maintenance Projects, was intended to provide direction to more focused efforts to increase the efficiency of existing homes; in this meeting, the focus was specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  19. Innovative and Organized Approaches to Foreign Language Teaching

    Max Florian Hertsch

    2013-03-01

    Full Text Available Innovation and organization in language education are more than just a teacher and students gathered in the same classroom at the same time, using the same materials and current motivation. The importance of innovations is highlighted by the European Label for innovative projects in language teaching and learning. For Turkey and its European Union membership ambitions, education is a prior section whose standard can be raised by innovations in foreign language education. Heyworth created a formula for innovations [C=(abc>x] which declares changes and its costs. The formula expresses that change for innovation equals several factors which must be more effective than the costs. In this article, Heyworth’s formula is transferred towards the language education system in Turkey. It will theoretically show advantages and changes and a way how Turkish organizations could change to provide more sustainable language education. Furthermore, the article will explain the already existing approaches and show their advantages and disadvantages. As a conclusion, a theoretical approach for innovations will be given and discussed.

  20. Innovative approaches to structuring the transaction agreement

    Droppo, D.L.

    1999-01-01

    Several issues regarding the negotiation and structuring of oil and gas property transactions are reviewed. They include: (1) areas of mutual exclusion covenants, (2) use of the short-form term sheet or letter agreement or the longer, more comprehensive formal offer or letter agreement, (3) coping with standard form purchase and sale agreements and property bid packages, (4) allocations of purchase price and their effect on ROFRs, (5) interim operations covenants, including maintaining insurance, contractual relationships and operational integrity, (6) structuring the transaction to facilitate unique financing requirements, (7) making effective use of adjustment clauses, (8) dealing with the cyclicity of commodity prices in the purchase and sale agreement, and (9) using escrow and trust arrangements to meet closure deadlines

  1. Innovative approach toward new generation sources

    Watanabe, N.

    2001-01-01

    The world neutron community needs more neutrons and more opportunities at a much less expense. A worldwide neutron net work proposed here would be a future dream of the community. A neutron source being able to satisfy such requirements is the innovative neutron source. A new FFAG synchrotron will be the best candidate to realize such a network consisting of various spallation sources ranging from kW to MW in beam power. There would be many advantages with this accelerator. The next are the target issues: how to accept a higher beam-power beyond 5 MW. Some thoughts are discussed here. Various moderators are discussed in connection with the requirements from the instruments proposed for JSNS, mainly focussed on the performance and utilization of a coupled hydrogen moderator with optimized premoderator, aiming at more efficient use of neutrons. A new idea for pulse shaping, 'mechanical poisoning' is proposed. At an existing spallation source the number of instruments is much smaller than at a reactor. In order to install as many instruments as possible, the beam extraction and branching methods become very important. However, even at a reactor, where mainly monochromatic neutrons are used, the neutron-intensity losses due to beam multiplexing uses are significant. This problem becomes more serious in case of a pulsed source, where in many cases polychromatic beams are required. This issue is also discussed. (author)

  2. Innovative approach toward new generation sources

    Watanabe, N. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    The world neutron community needs more neutrons and more opportunities at a much less expense. A worldwide neutron net work proposed here would be a future dream of the community. A neutron source being able to satisfy such requirements is the innovative neutron source. A new FFAG synchrotron will be the best candidate to realize such a network consisting of various spallation sources ranging from kW to MW in beam power. There would be many advantages with this accelerator. The next are the target issues: how to accept a higher beam-power beyond 5 MW. Some thoughts are discussed here. Various moderators are discussed in connection with the requirements from the instruments proposed for JSNS, mainly focussed on the performance and utilization of a coupled hydrogen moderator with optimized premoderator, aiming at more efficient use of neutrons. A new idea for pulse shaping, 'mechanical poisoning' is proposed. At an existing spallation source the number of instruments is much smaller than at a reactor. In order to install as many instruments as possible, the beam extraction and branching methods become very important. However, even at a reactor, where mainly monochromatic neutrons are used, the neutron-intensity losses due to beam multiplexing uses are significant. This problem becomes more serious in case of a pulsed source, where in many cases polychromatic beams are required. This issue is also discussed. (author)

  3. IAEA Technical Meeting on Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors. Working Material

    2011-01-01

    The IAEA, within the framework of its Nuclear Energy Department’s Technical Working Group on Fast Reactors (TWG-FR), assists Member States activities in fast reactors technology development areas by providing an umbrella for information exchange [topical Technical Meetings (TMs), Workshops and large Conferences] and collaborative R&D [Coordinated Research Projects (CRPs)]. The Technical meeting on “Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors” was held from 21 – 22 December 2011 in Vienna, addressing Member States’ expressed needs of information exchange in the field of advanced fast reactor design features, with particular attention to innovative heat exchangers and steam generators. The Objective of the TM is to provide a global forum for in-depth information exchange and discussion on the most advanced concepts of heat exchangers and steam generators for fast reactors. More specifically, the objectives are: · Review of the status of advanced fast reactor development activities with special emphasis on design and performance of heat exchangers and steam generators; · Discuss requirements for innovative heat exchangers and steam generators; · Present results of studies and conceptual designs for innovative heat exchangers and steam generators; · Provide recommendations for international collaboration under the IAEA aegis. The meeting agenda of the meeting is in Annex I

  4. Nursing education innovation: using e-learning technology to meet learners' needs.

    Wahl, Stacy E; Latayan, Monica B

    2011-11-01

    Globalization, rapid advances in health care and research, and evidence-based practice challenge organizations to meet the continuing education needs of their professional staff while functioning within the confines of economic cutbacks. This column describes an innovative way technology was used to offer asynchronous learning to all members of one organization's nursing staff. Copyright 2011, SLACK Incorporated.

  5. Foods: Where Innovation, Agriculture, Molecular Biosciences and Human Nutrition Meet

    Charles Brennan

    2012-11-01

    Full Text Available There is one commodity the world over that unites mankind—food. In 2011 the United Nations claimed that the world’s population had reached the seven billion mark, a number which is set to increase dramatically in the decades to come. Food security, supply and sustainability are of paramount concern to the future economic and social progress of humanity. It is the responsibility of the food industry, together with food scientists and technologists, to shoulder the burden of ensuring an adequate supply of nutritious, safe and sensorially acceptable foods for a range of demanding consumers. In responding to this challenge, we need to understand the link between agriculture, engineering, food processing, molecular biosciences, human nutrition, commercialisation and innovation. Access to information concerning the composition and quality of foods has never been so easy for consumers and technologists alike. A plethora of research publications are made available each month to scientists and associated interested parties. The outcomes of these research manuscripts are often distilled and disseminated into messages available to everyone through bulletin boards, forums and the popular press. Newspapers and new agencies constantly report on the latest pharma-medical finding, or news regarding food safety and security concerns. We live in an age where information is so readily available to everyone that the task of finding credible and reputable data can be difficult at times. Providing sound evidenced based research is where a peer-reviewed journal can provide clarity. [...

  6. Foods: Where Innovation, Agriculture, Molecular Biosciences and Human Nutrition Meet.

    Brennan, Charles

    2012-11-21

    There is one commodity the world over that unites mankind-food. In 2011 the United Nations claimed that the world's population had reached the seven billion mark, a number which is set to increase dramatically in the decades to come. Food security, supply and sustainability are of paramount concern to the future economic and social progress of humanity. It is the responsibility of the food industry, together with food scientists and technologists, to shoulder the burden of ensuring an adequate supply of nutritious, safe and sensorially acceptable foods for a range of demanding consumers. In responding to this challenge, we need to understand the link between agriculture, engineering, food processing, molecular biosciences, human nutrition, commercialisation and innovation. Access to information concerning the composition and quality of foods has never been so easy for consumers and technologists alike. A plethora of research publications are made available each month to scientists and associated interested parties. The outcomes of these research manuscripts are often distilled and disseminated into messages available to everyone through bulletin boards, forums and the popular press. Newspapers and new agencies constantly report on the latest pharma-medical finding, or news regarding food safety and security concerns. We live in an age where information is so readily available to everyone that the task of finding credible and reputable data can be difficult at times. Providing sound evidenced based research is where a peer-reviewed journal can provide clarity. [...].

  7. Proposal of Innovative Approaches of Relationship Marketing in Business

    Viliam Lendel

    2015-03-01

    Full Text Available The aim of this paper is to propose innovative approaches to relationship marketing that affect the process of building relationships with customers, based on a detailed analysis of the literary sources and the research. This proposal is supported by the information technology e-CRM and social CRM. The paper contains a detailed description of the procedure for successfully implementing innovative approaches to relationship marketing in business. This should serve mainly to marketing managers as a valuable tool in their use of innovative approaches to relationship marketing, especially in the process of obtaining innovative ideas from customers, in order to identify their needs and requirements. Furthermore, the paper contains the main results of our research aimed at identifying the extent of utilization of innovative approaches to relationship marketing in Slovak businesses. A total of 207 respondents were involved in the research (medium and large businesses and following methods were used: comparative method of qualitative evaluation method, the method of structured and structured interview method, observation, document analysis method (method of content analysis and questionnaire method.

  8. Innovative visualization and segmentation approaches for telemedicine

    Nguyen, D.; Roehrig, Hans; Borders, Marisa H.; Fitzpatrick, Kimberly A.; Roveda, Janet

    2014-09-01

    In health care applications, we obtain, manage, store and communicate using high quality, large volume of image data through integrated devices. In this paper we propose several promising methods that can assist physicians in image data process and communication. We design a new semi-automated segmentation approach for radiological images, such as CT and MRI to clearly identify the areas of interest. This approach combines the advantages from both the region-based method and boundary-based methods. It has three key steps compose: coarse segmentation by using fuzzy affinity and homogeneity operator, image division and reclassification using the Voronoi Diagram, and refining boundary lines using the level set model.

  9. Innovation Networks New Approaches in Modelling and Analyzing

    Pyka, Andreas

    2009-01-01

    The science of graphs and networks has become by now a well-established tool for modelling and analyzing a variety of systems with a large number of interacting components. Starting from the physical sciences, applications have spread rapidly to the natural and social sciences, as well as to economics, and are now further extended, in this volume, to the concept of innovations, viewed broadly. In an abstract, systems-theoretical approach, innovation can be understood as a critical event which destabilizes the current state of the system, and results in a new process of self-organization leading to a new stable state. The contributions to this anthology address different aspects of the relationship between innovation and networks. The various chapters incorporate approaches in evolutionary economics, agent-based modeling, social network analysis and econophysics and explore the epistemic tension between insights into economics and society-related processes, and the insights into new forms of complex dynamics.

  10. An Innovative Multimedia Approach to Laboratory Safety

    Anderson, M. B.; Constant, K. P.

    1996-01-01

    A new approach for teaching safe laboratory practices has been developed for materials science laboratories at Iowa State university. Students are required to complete a computerized safety tutorial and pass an exam before working in the laboratory. The safety tutorial includes sections on chemical, electrical, radiation, and high temperature safety. The tutorial makes use of a variety of interactions, including 'assembly' interactions where a student is asked to drag and drop items with the mouse (either labels or pictures) to an appropriate place on the screen (sometimes in a specific order). This is extremely useful for demonstrating safe lab practices and disaster scenarios. Built into the software is a record tracking scheme so that a professor can access a file that records which students have completed the tutorial and their scores on the exam. This paper will describe the development and assessment of the safety tutorials.

  11. An Innovative Interdisciplinary Approach to Providing Internships for College Seniors

    Fuller, Kathy

    2015-01-01

    The undergraduate Business and Human Development (HD) Departments at California State University San Marcos (CSUSM), are collaborating in an innovative interdisciplinary approach to supporting internships with local businesses in order to provide college seniors with experiences in the area of career development known as the "Senior…

  12. Addressing complex challenges using a co-innovation approach

    Vereijssen, Jessica; Srinivasan, M.S.; Dirks, Sarah; Fielke, Simon; Jongmans, C.T.; Agnew, Natasha; Klerkx, Laurens; Pinxterhuis, Ina; Moore, John; Edwards, Paul; Brazendale, Rob; Botha, Neels; Turner, James A.

    2017-01-01

    Co-innovation can be effective for complex challenges – involving interactions amongst multiple stakeholders, viewpoints, perceptions, practices and interests across programmes, sectors and national systems. Approaches to challenges in the primary sector have tended to be linear, where tools and

  13. Innovative Approaches to Task Shifting in Mental Health | CRDI ...

    Innovative Approaches to Task Shifting in Mental Health. Across the world, it is estimated that mental disorders account for 12% of disability-adjusted life years. This proportion is still increasing and projected to reach 15% by 2020. However, provision of mental health services has not matched the need, especially in ...

  14. Teaching Qualitative Research: A Successful Pilot of an Innovative Approach

    Danquah, Adam N.

    2017-01-01

    This paper describes the development and delivery of an innovative approach to teaching qualitative research methods in psychology. The teaching incorporated a range of "active" pedagogical practices that it shares with other teaching in this area, but was designed in such a way as to follow the arc of a qualitative research project in…

  15. Smart Specialization and EU Eastern Innovation Cooperation: A Conceptual Approach

    Prause Gunnar

    2014-06-01

    Full Text Available The concept of smart specialization as a policy approach for regional development through increased regional productivity and competitiveness in the European context is actively discussed (European Union, 2009; OECD, 2014. Meanwhile, smart specialization has found its way into EU cohesion policy as well as into the European Commission’s Innovation Union flagship programme.

  16. Supporting Faculty During Pedagogical Change Through Reflective Teaching Practice: An Innovative Approach.

    Armstrong, Deborah K; Asselin, Marilyn E

    Given the recent calls for transformation of nursing education, it is critical that faculty be reflective educators. Reflective teaching practice is a process of self-examination and self-evaluation to gain insight into teaching to improve the teaching-learning experience. Limited attention has been given to this notion in the nursing education literature. An innovative reflective teaching practice approach for nursing education is proposed, consisting of question cues, journaling, and a process of facilitated meetings. The authors describe their perceptions of using this approach with faculty during the implementation of a new pedagogy and suggest areas for further research.

  17. Innovative Approach for IBS Vendor Selection Problem

    Omar Mohd Faizal

    2016-01-01

    Full Text Available Supply chain management in Industrialised Building System (IBS construction management has significantly determined the successful of company and project performance. Due to the wide variety of criteria and vendor available, the vendor selection process for a specific project needs is becoming more difficult. The need of decision aid for vendor selection in other areas is widely discussed in previous research. However, study on vendor selection for IBS project is largely neglected. Decision Support System (DSS is proposed for this purpose. Yet, most of the DSS models are impractical since they are complicated and difficult for a layman such as project managers to use. Research indicates that the rapid development of ICT has highly potential towards simple and effective DSS. Thus, this paper highlights the importance and research approach for vendor selection in IBS project management. The study is based on Design Science Research Methodology with combination of case studies. It is anticipates that this study will yield an effective value-for-money decision making platform to manage vendor selection process.

  18. Involving users in the refinement of the competency-based achievement system: an innovative approach to competency-based assessment.

    Ross, Shelley; Poth, Cheryl-Anne; Donoff, Michel G; Papile, Chiara; Humphries, Paul; Stasiuk, Samantha; Georgis, Rebecca

    2012-01-01

    Competency-based assessment innovations are being implemented to address concerns about the effectiveness of traditional approaches to medical training and the assessment of competence. Integrating intended users' perspectives during the piloting and refinement process of an innovation is necessary to ensure the innovation meets users' needs. Failure to do so results in no opportunity for users to influence the innovation, nor for developers to assess why an innovation works or does not work in different contexts. A qualitative participatory action research approach was used. Sixteen first-year residents participated in three focus groups and two interviews during piloting. Verbatim transcripts were analyzed individually and then across all transcripts using a constant comparison approach. The analysis revealed three key characteristics related to the impact on the residents' acceptance of the innovation as being a worthwhile investment of time and effort: access to frequent, timely, and specific feedback from preceptors. Findings were used to refine the innovation further. This study highlights the necessary conditions for assessing the success of implementation of educational innovations. Reciprocal communication between users and developers is vital. This reflects the approaches recommended in the Ottawa Consensus Statement on research in assessment published in Medical Teacher in March 2011.

  19. R&D, patents and innovation: a differential game approach

    Wang, H.-M.

    2016-01-01

    A patent race is a technological competition among firms and the firm making a first-hand innovation takes advantages of patenting. Firms strategically invest in R&D and produce knowledge in order to innovate. Instead of growing model of R&D, I use a differential game approach to investigate firms interaction of R&D behavior in a patent race. In general, knowledge is an intangible good that gives a special feature of a patent race. Whether knowledge is substitutable to the existing knowledge ...

  20. Identifying technology innovations for marginalized smallholders-A conceptual approach.

    Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

    2017-05-01

    This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

  1. ELT in a changing world innovative approaches to new challenges

    Ahmed, Azra; Saleem, Faiza; Cane, Graeme

    2013-01-01

    A novel ELT resource for language specialists and teachers across the world, this selection of papers is a collection of the most compelling and innovative ideas presented at a seminar hosted by the Centre of English Language, Aga Khan University, Pakistan, in January 2011, entitled 'ELT in a Changing World: Innovative Approaches to New Challenges'.The book is divided into three sections, the first of which is 'Global change and language learning'. This section offers a guided tour of language teaching evolution, highlighting the merits of enhanced language awareness, self-immersive and input/

  2. Transatlantic Innovations: a new approach to international ideas and technology.

    Evans, Gregory R D; Blondeel, Phillip; Marchac, Daniel; Kinney, Brian; Cunningham, Bruce; Neuhann-Lorenz, Constance

    2010-07-01

    In April of this past year, Transatlantic Innovations brought a variety of organizations and industry together for an international exchange of ideas, new technology, and current trends in plastic surgery. The meeting was highly interactive and included audience response devices. The focus was on 10 major areas: (1) new surgical techniques; (2) composite allografts versus conventional techniques, facing the future; (3) interspecialty collaboration versus competition; (4) the business of plastic surgery, best practices; (5) the image of the plastic surgeon, branding yourself; (6) medical tourism; (7) publicity; (8) the regulation of innovation, U.S. Food and Drug Administration and European Medicines Agency perspective; (9) the future of plastic surgery, cutting edge technologies; and (10) applications and controversies in fat grafting. The meeting concluded with the 8th International Committee for Quality Assurance, Medical Technologies and Devices in Plastic Surgery Consensus Conference with the development of a consensus statement. Through an interactive audience response system, additional questions and attitudes were asked of the audience and, in real time, international differences were identified, which led to further discussions from panelists. Responses were identified in three major groups: European Union, North America, and the Rest of the World. Responses and data are included in this article. The meeting brought participants, industry, regulators, and educators from both sides of the Atlantic. The interaction of these groups in these outlined topics brought a unique perspective to the meeting and, in the end, volumes of data. We have more in common than we believe. It is our anticipation that as we as plastic surgeons move forward, we can use these interactions to help our own practices but more specifically the specialty as a whole.

  3. Innovation in Healthcare Delivery: Commentary on an Evolutionary Approach.

    Fields, Anthony L A

    2015-01-01

    Zwarenstein (2015) proposes a novel approach to healthcare innovation that parallels biological evolution, based on stimulation and reward of multiple small competing innovation projects conducted in the field by decentralized teams. Projects would be designed with explicit outcome targets and results would be widely disseminated and publicly available. More successful projects would be grown and spread. Critical to the model is accepting and reporting failure as well as success, for the benefit of future project design. Examining biological evolution for lessons for healthcare delivery innovation illuminates the need for diversity among healthcare systems to achieve optimum application of best practice interventions across jurisdictions with differing population, provider and facility characteristics. However, careful coordination will be needed to achieve the balance between diversity and harmony across jurisdictions necessary for effective governance and interaction. There are important methodological issues to be addressed to reduce the uncertainty inherent in comparisons of results among discrete innovation projects, especially when observed improvements over the baseline are modest. As well as evolutionary improvement in healthcare outcomes, the model should progressively increase decentralized capacity and expertise in innovation processes.

  4. Remanufacturing Aided Added-Value Creation, Innovations Meeting to Deliver Sustainable Manufacturing

    Tariq Abullah, Ziyad; Guo, Shun Sheng; Yun, Sheng Bu

    2015-05-01

    End-of-life scrap steel such as vehicles bulks and bodies, steel wheel and shells are easily land filled at the end-of-life when treated in a developing country with non-industrial infrastructure. Research idea is about composite shape steel remanufacturing to be sheet steel for construction application through nested recovered pieces of scrap steel within new sheet steel base to meet innovation value creation of remanufactured steel and innovation eco-design of steel products to close supply chain through linkage developed and developing countries of non-industrial infrastructure economy. That can be satisfied through comprehensive business- education-training model conduction firstly at the developing countries to reduce costs and change the intensive labour remanufacturing paradigm collaboratively. Sustainable remanufacturing business model can be applied based on infrastructure of educational institutions such as institutes of technology to adopt environmental, economic, and social developments as triple bottom line sustainability. Such innovation value creation is driven by eco-design and eco-innovation enabling where the meet to deliver human development, employment, and education conscious environment and bench mark recommendations of development directions for upgrading to apply business that allows eco-societies to emerge, through cooperative steel scrap processing.

  5. Sustainable Technology and Business Innovation Framework – A Comprehensive Approach

    Maja Levi Jakšić

    2018-05-01

    Full Text Available Despite of the rising awareness of the urgency in finding more efficient and effective ways to achieve sustainable development, comprehensive and consistent meaning is still elusive both in theory and practice. The aim of this paper is to create a more structured theoretical framework related to macro and micro perspectives of sustainable development, relevant also to enhancing sustainable practices. We here propose a comprehensive framework model for structuring multiple sustainability principles and practices, detected in the literature as different sustainability categories related to both macro and micro perspectives of sustainability in the economy and society. The focus is on relevant sustainability principles of technology and business innovation in relation to basic technology and business innovation models as a contribution to less investigated theoretical aspects of sustainable business development. We developed a set of related matrices indicating the relevant roles and relationships between these principles in achieving sustainable business goals related to sustainable economy dimensions. Finally, the paper shows that the proposed Related Matrices Framework fulfils the main objective set in the initial research stages, i.e. to be of both theoretical and practical relevance. As a contribution to the theory it meets the need of building a structured, integrated, comprehensive model that serves the needs of better understanding different sustainability of macro and micro categories, indicating mutual relations and influences. In a practical sense, it can be used as a tool to support the management of change in companies oriented at achieving sustainable business goals based on sustainable technology and business innovation.

  6. The Typology of Methodological Approaches to Development of Innovative Clusters

    Farat Olexandra V.

    2017-06-01

    Full Text Available The aim of the article is to study the existing methodological approaches to assessing the development of enterprises for further substantiation of possibilities of their using by cluster associations. As a result of research, based on the analysis of scientific literature, the most applicable methodological approaches to assessing the development of enterprises are characterized. 8 methodical approaches to assessing the level of development of enterprises and 4 methodological approaches to assessing the level of development of clusters are singled out. Each of the approaches is characterized by the presence of certain advantages and disadvantages, but none of them allows to obtain a systematic assessment of all areas of cluster functioning, identify possible reserves for cluster competitiveness growth and characterize possible strategies for their future development. Taking into account peculiarities of the functioning and development of cluster associations of enterprises, we propose our own methodological approach for assessing the development of innovative cluster structures.

  7. Innovative Approaches to Increase Access to Medicines in Developing Countries

    Hilde Stevens

    2017-12-01

    Full Text Available Access to essential medicines is problematic for one third of all persons worldwide. The price of many medicines (i.e., drugs, vaccines, and diagnostics is unaffordable to the majority of the population in need, especially in least-developed countries, but also increasingly in middle-income countries. Several innovative approaches, based on partnerships, intellectual property, and pricing, are used to stimulate innovation, promote healthcare delivery, and reduce global health disparities. No single approach suffices, and therefore stakeholders need to further engage in partnerships promoting knowledge and technology transfer in assuring essential medicines to be manufactured, authorized, and distributed in low- and middle-income countries (LMICs in an effort of making them available at affordable and acceptable conditions.

  8. Innovative Phase Change Approach for Significant Energy Savings

    2016-09-01

    related to the production, use, transmission , storage, control, or conservation of energy that will – (A) reduce the need for additional energy supplies...Conditions set for operation were: a. The computer with the broadband wireless card is to be used for data collection, transmission and...FINAL REPORT Innovative Phase Change Approach for Significant Energy Savings ESTCP Project EW-201138 SEPTEMBER 2016 Dr. Aly H Shaaban Applied

  9. INNOVATIVE APPROACHES OF PHYSICAL EDUCATION AND SPORT IN CONTEMPORARY SOCIETY

    Maria LULESCU

    2017-05-01

    Full Text Available In the current era, physical education and sport know similarities, as well as differences to the previous historical periods, but also new, substantial elements, mainly in technology, information and culture. The theoretical background we start to discuss innovative approaches in physical education and sport carried out in educational institutions starts from the outline of essential functions of physical education and sport (Petecel 1980; Carstea 1999; Dragnea 2002. What are the current aspects and the direction of actions in the coming years? Can we find innovative methods in the pedagogy of physical education, which could turn into basic approaches in schools and universities? This paper examines a series of opportunities of action, taking into account the social and informational changes in contemporary society, covering innovative approaches focused on higher interaction, complementarity and physical education for life. In conclusion, it is only with the support of new, interdisciplinary pedagogy that we can sustain the modernization and implementation of physical education and sport programmes in the current academic system.

  10. Innovations and Innovative Approaches or Pseudo-Innovations in the Context of General Globalization? It's Time to Wake Up!

    Tchernev, Georgi

    2018-01-25

    Globalisation, scientific and technical progress are the basis of numerous innovative therapies for oncologic and non-oncologic diseases. It is another matter how much and by whom they are desired, and whether they have to be applied. When and how often? Innovative approaches should go towards simplification, universal distribution and application while at the same time analysis between the potential initial investment and the achieved final result should be made. An illustrative example for this is the targeted therapy for melanoma with its low baseline criteria or basic rules for its surgical treatment. Another example could be the confocal microscopy in the context of dysplastic nevus syndrome. Therapies for various autoimmune diseases should also be considered critically. In the current OAMJMS issue, as well as in some of our other ideas and statements reported also in OAMJMS, we are trying to answer at least to a part of these dilemmas, to provoke a critical point of view and to ask some simple questions: "Should any innovation be considered as a face value? Which is potentially beneficial for our patients? How could we regulate the processes to minimise the need for expensive medications for certain diseases? And, of course, we are also turning to our own mistakes by visualising the results of them!

  11. Interdisciplinary Approaches and Methods for Sustainable Transformation and Innovation

    Sangkyun Kim

    2015-04-01

    Full Text Available To increase the likelihood of success and sustainability, organizations must fundamentally reposition themselves and try to change current processes or create new products and services. One of the most effective approaches to find a solution for transformation and innovation is to learn from other domains where a solution for similar problems is already available. This paper briefly introduces the definition of and approaches to convergence of academic disciplines and industries, and overviews several representative convergence cases focusing on gamification for sustainable education, environments, and business managements.

  12. Conduct of operations training - An innovative approach to team building

    Widen, W.C.; Kurth, W.; Broccolo, A.

    1987-01-01

    The conduct of nuclear power plant operations is a key parameter for station management and regulators alike. Indeed, the basic methods and demeanor in which operating crews approach overall plant operations is perhaps the principal factor leading to safe and efficient operations. Hence, Commonwealth Edison's Zion Station has initiated an innovative and positive training program designed to increase operator awareness of conducting station operations in an attentive, diligent, and conscientious manner. This Conduct of Operations Training Program is a collaborative joint effort between Commonwealth Edison and the Westinghouse Nuclear Training Center. In particular, the key managers of Zion's operating department brainstormed various philosophies and strategies with senior training staff members of the Westinghouse Nuclear Training Center. The outcome of these sessions has formed the skeleton of an intensified, one-day Conduct of Operations course. Several unique aspects of this innovative course are described

  13. Innovative features and fuel design approach in the iris reactor

    Petrovic, B.; Carelli, M.; Greenspan, E.; Matsumoto, H.; Padovani, E.; Ganda, F.

    2002-01-01

    The International Reactor Innovative and Secure (IRIS) is being developed by an international consortium of industry, laboratory, university and utility establishments, led by Westinghouse. The IRIS design addresses key requirements associated with advanced reactors, including improved safety, enhanced proliferation resistance, competitive electricity production cost, and improved waste management. IRIS is a modular, small/medium size (335 MWe) PWR with an integral vessel configuration. The objective has been to base its design on proven LWR technology, so that no new technology development is needed and near-term deployment is possible, yet at the same time to introduce innovative features making it attractive when compared to present PWRs. These opposing requirements resulted in an evolutionary approach to fuel and core design, balancing new features against the need to avoid extensive testing and demonstration programmes. (author)

  14. Innovative approaches to inertial confinement fusion reactors: Final report

    Bourque, R.F.; Schultz, K.R.

    1986-11-01

    Three areas of innovative approaches to inertial confinement fusion (ICF) reactor design are given. First, issues pertaining to the Cascade reactor concept are discussed. Then, several innovative concepts are presented which attempt to directly recover the blast energy from a fusion target. Finally, the Turbostar concept for direct recovery of that energy is evaluated. The Cascade issues discussed are combustion of the carbon granules in the event of air ingress, the use of alternate granule materials, and the effect of changes in carbon flow on details of the heat exchanger. Carbon combustion turns out to be a minor problem. Four ICF innovative concepts were considered: a turbine with ablating surfaces, a liquid piston system, a wave generator, and a resonating pump. In the final analysis, none show any real promise. The Turbostar concept of direct recovery is a very interesting idea and appeared technically viable. However, it shows no efficiency gain or any decrease in capital cost compared to reactors with conventional thermal conversion systems. Attempts to improve it by placing a close-in lithium sphere around the target to increase gas generation increased efficiency only slightly. It is concluded that these direct conversion techniques require thermalization of the x-ray and debris energy, and are Carnot limited. They therefore offer no advantage over existing and proposed methods of thermal energy conversion or direct electrical conversion

  15. Virtual Reality as Innovative Approach to the Interior Designing

    Kaleja, Pavol; Kozlovská, Mária

    2017-06-01

    We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

  16. Innovative development of universities: organizational and economic approach

    Belokrylova Olga, S.

    2015-06-01

    Full Text Available It is shown that the innovative activity of universities in Russia is always accompanied by the organizational changes carried out in the framework of the concept of stage-by-stage approach – a combination of natural and subjectively rational principle and based on intra-organizational integration of all subjects of University ethos for joint decisions in the field of organizational change. The authors analyze the mission transformation of universities determined by formation of information society which now is including not only development of the human capital, but also creation of knowledge as the competitive product possessing the essential production and social importance.

  17. Innovation

    EPA frames innovation as critical to the protection of human health and the environment through initiatives such as sustainable practices, innovative research, prize competitions, innovation awards, partnerships, and community activities.

  18. A system-evolutionary approach for innovation policy

    Smits, Ruud E.H.M.; Kuhlmann, Stefan; Teubal, Morris

    2010-01-01

    A leading question addressed in this book is how to improve public policy, using insights from innovation studies and theory as well as from innovation practice and innovation policy. Innovation in this book is seen as a dynamic interactive process taking place in heterogeneous, more or less

  19. An innovative approach to capability-based emergency operations planning.

    Keim, Mark E

    2013-01-01

    This paper describes the innovative use information technology for assisting disaster planners with an easily-accessible method for writing and improving evidence-based emergency operations plans. This process is used to identify all key objectives of the emergency response according to capabilities of the institution, community or society. The approach then uses a standardized, objective-based format, along with a consensus-based method for drafting capability-based operational-level plans. This information is then integrated within a relational database to allow for ease of access and enhanced functionality to search, sort and filter and emergency operations plan according to user need and technological capacity. This integrated approach is offered as an effective option for integrating best practices of planning with the efficiency, scalability and flexibility of modern information and communication technology.

  20. Beyond agricultural innovation systems? Exploring an agricultural innovation ecosystems approach for niche design and development in sustainability transitions

    Pigford, Ashlee Ann E.; Hickey, Gordon M.; Klerkx, Laurens

    2018-01-01

    Well-designed and supported innovation niches may facilitate transitions towards sustainable agricultural futures, which may follow different approaches and paradigms such as agroecology, local place-based food systems, vertical farming, bioeconomy, urban agriculture, and smart farming or digital

  1. Spinning the Innovation and Entrepreneurship Mindset: A Modern Physics Approach

    Roughani, Bahram

    2010-04-01

    Topics in Modern Physics course from relativity to quantum mechanics were examined in the context of innovation as part of the recent Kettering University program on ``Entrepreneurship Across Curriculum-EAC.'' The main goals were (a) to introduce innovation and entrepreneurship without eliminating any topics from this course, (b) to use EAC as a vehicle for intentional education that produces graduates with innovative mindsets, (c) to enrich the students learning experience aligned with the desired educational outcomes, and (d) to highlight the impact of scientific innovation in the society, while encouraging students to re-think how entrepreneurship mindset could maximize their impact in the society through innovation. Ideas such as principles behind innovation and innovative ideas, disciplines of innovations, formation of innovation teams, and effective methods for analyzing innovative value propositions were introduced in this course. Most of the implementation were achieved through out of class activities, and communicated through in class presentations, papers or weekly laboratory reports.

  2. Cork Design : A Design Action Intervention Approach Towards Sustainable Product Innovation

    Mestre, A.C.C.M.

    2014-01-01

    The study Cork Design: A Design Action Intervention Approach Towards Sustainable Product Innovation comprises the systematic implementation of sustainable product innovation within the Portuguese cork sector, through action research. Cork is a natural, recyclable, non-toxic, and renewable resource,

  3. A Comparative Approach to the Protection of Fashion Innovations

    Wulf, Alexander

    2016-01-01

    This paper determines the relevance of industrial property rights to the development of innovations in the fashion industry. It examines how the level of innovation can remain high despite a free exchange of intellectual property – fashion designs – within the industry: The importance of innovation for a fashion business in the industry is determined by the choice of it’s competitive strategy. That is, either to be an innovator who creates fashion innovations or to be an imitator who...

  4. Innovative approaches in the manufacture of zirconium alloy components for PHWRs

    Rao, M.N.; Srivastava, R.K.

    2005-01-01

    Selection of an appropriate route for the fabrication of Zirconium alloy fuel components has a direct bearing on the quality of finished product. Many sophisticated and intricate processes such as vacuum arc melting, extrusion, hot rolling and cold working processes - swaging, drawing and sheet rolling are employed. Many advances were made in eddy current and ultrasonic evaluation to meet the stringent quality control requirement and locate the micro flaws. Emphasis was laid on achieving high recoveries and manufacture the product at minimum cost. Several creative and innovative processes were adopted particularly in the fabrication of end caps and spacers. The spacers were produced through the wire route and subsequently parting them into tiny spacers, which is entirely different from the conventional route of fabricating the sheets followed by blanking and coining. This has improved the material recovery and the lead time has been reduced substantially. The end caps used for the closure of clad tubes have to meet the most stringent quality requirements to avoid micro-flaws. The manufacturing processes adopted have direct influence on the integrity of the finished product. Special defect standards were developed to identify and eliminate micro-flaws and thereby ensure consistent and repetitive quality product. The paper brings out the above innovative approaches made in fabrication and quality control techniques in the manufacture of fuel components for PHWR fuel bundles. (author)

  5. Embedding accountability throughout innovation process in the green economy: the need for an innovative approach

    Setiawan, A.D.; Singh, R.; Romijn, H.A.; Taufik, T.; Prabasari, I.; Rineksane, I.A.; Yaya, R.; Widowati, R.; Putra, R.; Riyadi, S.; Harsanto, P.

    Innovation in the green economy entails transformative change in society. Vital infrastructure technologies in the fields of energy, water, communication, waste handling, and so on have many interdependencies with other economic sectors. Hence, introducing green innovation in such sectors has

  6. Innovative approaches to clinical development and trial design

    John J Orloff

    2011-01-01

    Full Text Available Pharmaceutical innovation is increasingly risky, costly and at times inefficient, which has led to a decline in industry productivity. Despite the increased investment in R&D by the industry, the number of new molecular entities achieving marketing authorization is not increasing. Novel approaches to clinical development and trial design could have a key role in overcoming some of these challenges by improving efficiency and reducing attrition rates. The effectiveness of clinical development can be improved by adopting a more integrated model that increases flexibility and maximizes the use of accumulated knowledge. Central to this model of drug development are novel tools, including modelling and simulation, Bayesian methodologies, and adaptive designs, such as seamless adaptive designs and sample-size re-estimation methods. Applications of these methodologies to early- and late-stage drug development are described with some specific examples, along with advantages, challenges, and barriers to implementation. Because they are so flexible, these new trial designs require significant statistical analyses, simulations and logistical considerations to verify their operating characteristics, and therefore tend to require more time for the planning and protocol development phase. Greater awareness of the distinct advantages of innovative designs by regulators and sponsors are crucial to increasing the adoption of these modern tools.

  7. IAEA Technical Meeting on Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors. Presentations

    2011-01-01

    The fast reactor, which can generate electricity and breed additional fissile material for future fuel stocks, is a resource that will be needed when economic uranium supplies for the thermal reactors diminish. Further, the fast-fission fuel cycle in which material is recycled (a basic requirement to meet sustainability criteria) offers the flexibility needed to contribute decisively towards solving the problem of growing “spent” fuel inventories by greatly reducing the volume, the heat load and the radiotoxic inventory of high-level wastes that must be disposed of in long-term geological repositories. This is a waste management option that will play an increasingly important role in the future, and help to ensure that nuclear energy remains a sustainable long-term option in the world’s overall energy mix. In recognition of the fast reactor’s importance for the sustainability of the nuclear option, currently there is worldwide renewed interest in fast reactor technology development, as indicated, e.g., by the outcome of the Generation IV International Forum (GIF) technology review, which concluded with 3 out of 6 innovative systems to be fast reactors (gas cooled fast reactor, sodium cooled fast reactor, and heavy liquid metal cooled fast reactor), plus a potential fast core for a 4th concept, the super-critical water reactor. Currently, fast reactor construction projects are ongoing in India (PFBR) and Russian Federation (BN-800), whilst in China the first experimental fast reactor (CEFR) is in the commissioning phase. Fast reactor programs are also carried out in Europe (in particular in France), Japan, Republic of Korea and the USA. The most important challenges for fast reactors are in the areas of cost competitiveness with respect to LWRs and other energy sources, enhanced safety, non-proliferation, and public acceptance. With the exception of this latter, these translate into technology development challenges, i.e. the development of advanced reactor

  8. Offsets : An innovative approach to reducing greenhouse gases

    Steward, B.

    1998-01-01

    One of the most innovative ways to address climate change is the use of offsets, which refers to actions taken outside of a company's operations, domestically and internationally, to reduce greenhouse gas emissions. This paper is devoted to a discussion of Suncor Energy's action plan for greenhouse gases which include offsets, and to an explanation of the reasons why offsets are fundamental to successful greenhouse gas management. Suncor Energy Inc., has developed a plan with seven elements to meet their target of stabilizing their greenhouse gas emissions at 1990 levels by year 2000. The seven elements include: (1) energy efficiency and process improvements at their oil sands facility, (2) the development of alternative and renewable sources of energy, such as ethanol blended gasolines and the use of wind turbines to generate electricity, (3) promoting environmental and economic research to develop more advanced oil and gas technology to reduce greenhouse gas emissions, (4) implementing a constructive public policy input in support of sustainable development, (5) educating employees, customers and communities on global climate change, (6) measuring and reporting the company's environmental progress, and (7) pursuing domestic and international offset opportunities such as transfer of technology to developing countries, cogeneration of energy using natural gas, energy efficiency, renewable energy sources, emission reduction purchases and forest conservation. Of these proposed measures, offsets are the critical element which could spell the difference between success and failure in managing greenhouse gas emissions and the difference between economic hardship and economic opportunity

  9. The future of health IT innovation and informatics: a report from AMIA's 2010 policy meeting

    McGowan, Julie J; Cusack, Caitlin M

    2012-01-01

    While much attention has been paid to the short-term impact that widespread adoption of health information technology (health IT) will have on the healthcare system, there is a corresponding need to look at the long-term effects that extant policies may have on health IT system resilience, innovation, and related ethical, social/legal issues. The American Medical Informatics Association's 2010 Health Policy Conference was convened to further the national discourse on the issues surrounding these longer-term considerations. Conference participants self-selected into three broad categories: resilience in healthcare and health IT; ethical, legal, and social challenges; and innovation, adoption, and sustainability. The discussions about problem areas lead to findings focusing on the lack of encouragement for long-term IT innovation that may result from current health IT policies; the potential impact of uneven adoption of health IT based on the exclusions of the current financial incentives; the weaknesses of contingency and risk mitigation planning that threaten system resilience; and evolving standards developed in response to challenges relating to the security, integrity, and availability of electronic health information. This paper discusses these findings and also offers recommendations that address the interwoven topics of innovation, resilience, and adoption. The goal of this paper is to encourage public and private sector organizations that have a role in shaping health information policy to increase attention to developing a national strategy that assures that health IT innovation and resilience are not impeded by shorter-term efforts to implement current approaches emphasizing adoption and meaningful use of electronic health records. PMID:22037887

  10. A Competence-Based Approach to Sustainable Innovation Teaching

    McAloone, Timothy Charles

    2007-01-01

    the object of a research exercise, to affect and observe various approaches to the teaching of design. Particular attention will be paid in this case to competencies, both initiated in the teaching and the evaluated in the students’ interpretation of the theoretical contents. The lessons learned from...... through educational curricula and research programmes. This paper presents an initiative from Denmark, showing new interpretations of industrial needs, research insights, educational ideas and identification of core innovative engineering competencies. The new Danish Master of Science engineering...... the first three years of this semester’s application and teaching to approximately 55 students per year are presented and discussed. After introducing the motivation and background for establishing the education programme, the consideration of competence-based education is described, in the context...

  11. Applying the Innov8 approach for reviewing national health programmes to leave no one behind: lessons learnt from Indonesia

    Saint, Victoria; Floranita, Rustini; Koemara Sakti, Gita Maya; Pambudi, Imran; Hermawan, Lukas; Villar, Eugenio; Magar, Veronica

    2018-01-01

    ABSTRACT The World Health Organization’s Innov8 Approach for Reviewing National Health Programmes to Leave No One Behind is an eight-step process that supports the operationalization of the Sustainable Development Goals’ commitment to ‘leave no one behind’. In 2014–2015, Innov8 was adapted and applied in Indonesia to review how the national neonatal and maternal health action plans could become more equity-oriented, rights-based and gender-responsive, and better address critical social determinants of health. The process was led by the Indonesian Ministry of Health, with the support of WHO. It involved a wide range of actors and aligned with/fed into the drafting of the maternal newborn health action plan and the implementation planning of the newborn action plan. Key activities included a sensitization meeting, diagnostic checklist, review workshop and in-country work by the review teams. This ‘methods forum’ article describes this adaptation and application process, the outcomes and lessons learnt. In conjunction with other sources, Innov8 findings and recommendations informed national and sub-national maternal and neonatal action plans and programming to strengthen a ‘leave no one behind’ approach. As follow-up during 2015–2017, components of the Innov8 methodology were integrated into district-level planning processes for maternal and newborn health, and Innov8 helped generate demand for health inequality monitoring and its use in planning. In Indonesia, Innov8 enhanced national capacity for equity-oriented, rights-based and gender-responsive approaches and addressing critical social determinants of health. Adaptation for the national planning context (e.g. decentralized structure) and linking with health inequality monitoring capacity building were important lessons learnt. The pilot of Innov8 in Indonesia suggests that this approach can help operationalize the SDGs’ commitment to leave no one behind, in particular in relation to

  12. Where humans meet machines innovative solutions for knotty natural-language problems

    Markowitz, Judith

    2013-01-01

    Where Humans Meet Machines: Innovative Solutions for Knotty Natural-Language Problems brings humans and machines closer together by showing how linguistic complexities that confound the speech systems of today can be handled effectively by sophisticated natural-language technology. Some of the most vexing natural-language problems that are addressed in this book entail   recognizing and processing idiomatic expressions, understanding metaphors, matching an anaphor correctly with its antecedent, performing word-sense disambiguation, and handling out-of-vocabulary words and phrases. This fourteen-chapter anthology consists of contributions from industry scientists and from academicians working at major universities in North America and Europe. They include researchers who have played a central role in DARPA-funded programs and developers who craft real-world solutions for corporations. These contributing authors analyze the role of natural language technology in the global marketplace; they explore the need f...

  13. Business models in open innovation and commercialization - a dynamic approach

    Vanhaverbeke, W.P.M.; Picot, A; Doeblin, S.

    2009-01-01

    This afternoon I will talk about business models because in open innovation they play a crucial role. If you have read the books of Henry Chesbrough or other authors on open innovation, you know that business models are important in explaining the phenomenon of open innovation. Moreover, they are

  14. The Methodical Approaches to Activation of Innovative Potential of Enterprise

    Berveno Oksana V.

    2017-12-01

    Full Text Available The article is aimed at developing theoretical provisions and practical recommendations on methods of management and activation of innovative potential of enterprises. Assessment of innovative potential of enterprise should be carried out from different positions, taking into consideration all external and internal possibilities of enterprise as to carrying out an innovation activity. The system of management of innovation activity and implementation of innovative potential at enterprise should be closely woven in the general management of the enterprise. Activation of innovative potential of enterprise foresees adoption of the whole system of strategic decisions, which are aimed at creation of the most favorable conditions for implementation of innovative potential with obtaining of planned results. The system of activization of innovative potential should develop a number of organizational decisions on interaction of elements of the most innovative potential in the process of innovation activity and cooperation of innovative potential with other subsystems of the enterprise. Results of these organizational decisions in many respects determine efficiency of innovation activity of the enterprise.

  15. Using innovative instructional technology to meet training needs in public health: a design process.

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  16. A Holistic Approach to Interdisciplinary Innovation Supported by a Simple Tool

    Denise J. Stokholm, Marianne

    2008-01-01

    Innovation is recognised as a strategy to achieve competitive businesses and products. Managing innovation at all levels requires integration of knowledge and interdisciplinary cooperation. Different understandings and approaches to innovation between professions often result in communication...... problems. To overcome this barrier a common ground is needed. This paper describes a holistic approach to innovation and presents a simple tool for facilitating cooperation on a diversity of innovation matters. It describes the development and use of the tool and demonstrates its capacity to support...

  17. Innovative technological paradigm-based approach towards biofuel feedstock

    Xu, Jiuping; Li, Meihui

    2017-01-01

    Highlights: • DAS was developed through an innovative approach towards literature mining and technological paradigm theory. • A novel concept of biofuel feedstock development paradigm (BFDP) is proposed. • The biofuel production diffusion velocity model gives predictions for the future. • Soft path appears to be the driving force for the new paradigm shift. • An integrated biofuel production feedstock system is expected to play a significant role in a low-carbon sustainable future. - Abstract: Biofuels produced from renewable energy biomass are playing a more significant role because of the environmental problems resulting from the use of fossil fuels. However, a major problem with biofuel production is that despite the range of feedstock that can be used, raw material availability varies considerably. By combining a series of theories and methods, the research objective of this study is to determine the current developments and the future trends in biofuel feedstock. By combining technological paradigm theory with literature mining, it was found that biofuel feedstock production development followed a three-stage trajectory, which was in accordance with the traditional technological paradigm – the S-curve. This new curve can be divided into BFDP (biofuel feedstock development paradigm) competition, BFDP diffusion, and BFDP shift. The biofuel production diffusion velocity model showed that there has been constant growth from 2000, with the growth rate reaching a peak in 2008, after which time it began to drop. Biofuel production worldwide is expected to remain unchanged until 2030 when a paradigm shift is expected. This study also illustrates the results of our innovative procedure – a combination of the data analysis system and the technological paradigm theory – for the present biofuel feedstock soft path that will lead to this paradigm shift, with integrated biofuel production feedstock systems expected to be a significant new trend.

  18. An innovative approach to interdisciplinary occupational safety and health education.

    Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

    2011-07-01

    The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

  19. 48{sup th} Annual meeting on nuclear technology (AMNT). Key topic / Outstanding know-how and sustainable innovations

    Raetzke, Christian [CONLAR - Consulting on Nuclear Law, Licensing and Regulation, Leipzig (Germany)

    2017-08-15

    Summary report on the Key Topic Outstanding Know-How and Sustainable Innovations, Focus Session: International Regulation: Leveraging the Experience of Established Nuclear Countries for Regulations and Projects in Newcomer Countries, of the 48th Annual Meeting on Nuclear Technology (AMNT 2017) held in Berlin, 16 to 17 May 2017.

  20. 75 FR 76472 - Biologics Price Competition and Innovation Act of 2009; Meetings on User Fee Program for...

    2010-12-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0602] Biologics Price Competition and Innovation Act of 2009; Meetings on User Fee Program for Biosimilar and Interchangeable Biological Product Applications; Request for Notification of Stakeholder Intention To Participate...

  1. Assessment of the impact of innovation processes: methodological approaches

    Demilkhanova B.A.

    2016-12-01

    Full Text Available in the article the prospects of development of innovative processes at a regional level the system of indicators of assessment effective components of innovation potential of the region. A conclusion about the predominance in the economy of the regions under study investment options for updating technology has been made based on the calculation and analysis of indicators of innovation investment in the fixed capital.

  2. Defining Innovation: Using Soft Systems Methodology to Approach the Complexity of Innovation in Educational Technology

    Cox, Glenda

    2010-01-01

    This paper explores what educational technologists in one South African Institution consider innovation to be. Ten educational technologists in various faculties across the university were interviewed and asked to define and answer questions about innovation. Their answers were coded and the results of the overlaps in coding have been assimilated…

  3. Comparing the innovation effects of support schemes for renewable electricity technologies: A function of innovation approach

    Río, Pablo del; Bleda, Mercedes

    2012-01-01

    The aim of this paper is to provide a comparative assessment of the innovation effects of instruments which support the diffusion of renewable electricity technologies with a functions-oriented technological innovation system perspective. The paper provides a link between two major streams of the literature: the functions of innovation systems and the literature on renewable electricity support schemes. We show that, when a functional perspective is adopted, feed-in tariffs are likely to be superior to other policy instruments (quotas with tradable green certificates and tendering), although they still need to be complemented with other instruments, most importantly, direct R and D support. Furthermore, those innovation effects are affected by the specific design elements of the instruments chosen. - Highlights: ► A comparison of the innovation effects of instruments for the diffusion of renewable technologies. ► A functions-oriented technological innovation system perspective. ► A link between the functions of innovation systems and the literature on renewable electricity support schemes. ► Feed-in tariffs are likely to be superior to other instruments. ► Innovation effects are affected by the specific design elements of instruments.

  4. An Evolutionary Approach to Water Innovation: Comparing the Water Innovation Systems in China and Europe

    Moro, Mariú Abritta

    The recent rise of the ‘green economy’ agenda has increased the attention to eco-innovations globally, with issues related to water stress identified as one of the major bottlenecks for sustainable economic growth. Water being a critical resource, more and more countries worldwide are recognizing...... the need for increasing their innovative capacity within the water sector. Using evolutionary economic theory, this thesis undertakes a longitudinal and comparative analysis of the water innovation dynamics in Europe and China, representing respectively a developed, green early mover economy......, and a centrally-planned economy and green late mover. The thesis aims to assess the similarities and differences in the mechanisms applied across these two regions, with a focus on outlining what drives eco-innovation development in the water sector. The thesis builds more specifically on the innovation system...

  5. Region innovation and investment development: conceptual theoretical approach and business solutions

    Zozulya D.M.

    2017-01-01

    Full Text Available The article describes essential problems of the region business innovation and investment development under current conditions, issues of crisis restrictions negotiation and innovation-driven economy formation. The relevance of the research is defined by the need of effective tools creation for business innovation and investment development and support, which can be applied, first, to increase efficiency of the region industrial activity, then improve production competitiveness on the innovative basis, overcome existing problems and provide sustainable innovation development in the region. The results of conducted research are represented in the article including region innovation and investment development concept model made up by the authors on the basis of system theoretical approach. The tools of the region innovation development defined in the concept model are briefly reviewed in the article. The most important of them include engineering marketing (marketing of scientific and technical innovations, strategic planning, benchmarking, place marketing and business process modeling.

  6. THE ROLE OF HUMAN RESOURCE PRACTICES ON PROFITS GENERATED BY THE INNOVATIONS: THE ROLE OF TOP MANAGEMENT SUPPORT AND REGULARITY OF EMPLOYEES MEETINGS

    Tatjana Stanovcic

    2016-12-01

    Full Text Available Previous scholars argue that human resource practices advance valuable knowledge what could be reflected positively on innovations. Accordingly, we empirically investigate whether human resource related practices such as top management support and regularity of employees meetings are related to profit generated by the innovation activities. Using survey data of Montenegrin firms, we find that firms in which top management supports employees' idea and have regular employees meetings related to innovation activities are likely to report higher profit generated by innovations. Therefore, our results underline the crucial role of human resource practices in the process of innovation that generates profitability for firms.

  7. An innovative biofuel approach : 2,5-dimethylfuran (DMF)

    Xu, H.

    2009-01-01

    Dimethylfuran (DMF) has physical properties very close to gasoline, but it has a very high octane number and relatively low volatility. Compared to ethanol, it has an energy density higher by 50 per cent in volume and by 40 per cent in mass. DMF is stable in storage and not soluble in water and therefore it cannot become contaminated by absorbing water from the atmosphere. DMF is also an ideal candidate for a new generation of sustainable biofuel. This presentation discussed the use of DMF as an innovative biofuel approach and illustrated results for ignition delay; heat release rate; volumetric efficiency; engine efficiency; carbon emissions; hydrocarbon emissions; nitrogen oxide emissions; maximum combustion pressure; particulate matter emissions; and particulate mass and numbers. The ignition delay of DMF was shown to be shorter than that of gasoline. When it was compared with ethanol, the difference varied with load so that it was longer at the low load but shorter at higher load conditions. The emissions of carbon, hydrocarbon and nitrogen oxide using DMF were all similar to those with gasoline. Overall, the experiments confirmed that due to the physiochemical properties of DMF being similar to gasoline, DMF and gasoline exhibited very similar combustion and emissions characteristics. tabs., figs.

  8. SPICE SDM: Innovative Approaches for Linear Motion and Heat Management

    Relecom, Ken; Larcheveque, Cyril; Constant, Joël; Autissier, Nordahl; Pornin, Arnaud; Martini, Nicolas

    2015-09-01

    The SPICE Door Mechanism (SDM) is foreseen to be flown on Solar Orbiter, to close the SPICE instrument aperture and shield it from the solar flux and from contamination. The environment it is exposed to is particularly extreme, as the Solar Orbiter mission will reach a distance of 0.28 AU (41’887’403.8 km) to the Sun, and the SPICE instrument will be looking directly at it. Because of its position at the far end of a cantilevered structure, the SDM is also exposed to amplified launch loads and must remain very light and compact. The cleanliness constraints are also very tight, as the mechanism is positioned directly at the aperture of the SPICE spectrometer.To tackle these issues, two novelties were introduced on the SPICE Door Mechanism:- A specifically engineered reflective coating toprotect the Aluminium door from the heat generatedby the solar flux- The use of miniature profile rail type linearbearings to support the door during launch andallow its motion during the missionThis paper details the design and verification approach applied for these two innovations and for the mechanism as a whole, as well as the results and findings from the testing carried out on the Bread Board, Qualification and Flight models.

  9. Images of Innovation: An Ontological Approach (Keynote speech)

    McAloone, Timothy Charles; Hansen, P.H.K.; Larsen, J.H.

    2004-01-01

    Innovation perceived as the front-end activities to product development projects is a frequent research topic. However, since innovation research is a relatively young and unconsolidated field, these studies tend to originate from different domains, and represent a wide spectrum of viewpoints. Th...

  10. Interorganizational collaboration and innovation : Toward a portfolio approach

    Faems, D; Van Looy, B; Debackere, K

    In the literature on innovation, interorganizational collaboration has been advanced as beneficial for the innovative performance of firms. At the same time, large-scale empirical evidence for such a relationship is scarce. This article examines whether evidence can be found for the idea that

  11. Public procurement of innovation in construction : A design science approach

    Lenderink, B.; Halman, J. I.M.; Voordijk, J.T.

    2016-01-01

    The inclusion of innovation as a policy objective in public procurement has increased significantly at public organizations over the last years. However, public organizations often struggle with how they should stimulate innovation through public procurement as there are many different ways possible

  12. Approach for a Pattern-Based Development of Frugal Innovations

    Anne-Christin Lehner

    2018-04-01

    Full Text Available Emerging markets have become increasingly interesting for companies from industrialized countries, but the requirements in these markets differ dramatically from those in the companies’ traditional markets. New products and services are demanded – so-called frugal innovations. Since the challenges for the development of frugal innovations are often quite similar – for example, low income of the target customer, poor infrastructure, etc. – the hypothesis appears that the solutions will also be similar. In our earlier TIM Review article (Lehner & Gausemeier, 2016, we showed how solution patterns for frugal innovations can be derived. The article at hand summarizes those findings and supplements an innovation process for frugal innovation using the solution patterns. The validation based on the example of telemedical assistant systems shows the benefit of the pattern-based development of frugal innovations. The article addresses managers and engineers who plan to introduce frugal innovations, as well as university-based researchers interested in the development of frugal innovations.

  13. Exploring an innovative watershed management approach: From feasibility to sustainability

    Said, A.; Sehlke, G.; Stevens, D.K.; Sorensen, D.; Walker, W.; Hardy, T.; Glover, T.

    2006-01-01

    Watershed management is dedicated to solving watershed problems on a sustainable basis. Managing watershed development on a sustainable basis usually entails a balance between the needs of humans and nature, both in the present and in the future. From a watershed or water resources development basis, these problems can be classified into five general categories: lack of water quantity, deterioration in water quality, ecological impacts, weak public participation, and weak economic value. The first three categories can be combined to make up physical sustainability while the last two categories can be defined as social and economic sustainability. Therefore, integrated watershed management should be designed to achieve physical sustainability utilizing, to the greatest extent possible, public participation in an economically viable manner. This study demonstrates an innovative approach using scientific, social, and motivational feasibilities that can be used to improve watershed management. Scientific feasibility is tied to the nature of environmental problems and the scientific means to solve them. Social feasibility is associated with public participation. Motivational feasibility is related to economic stimulation for the stakeholders to take actions. The ecological impacts, lack of water quantity and deterioration in water quality are problems that need scientific means in order to improve watershed health. However, the implementation of these means is typically not achievable without the right public participation. In addition, public participation is typically accelerated by economic motivation for the stakeholders to use the resources in a manner that improves watershed health. The Big Lost River in south-central Idaho has been used as an illustration for implementing scientific, social and motivational feasibilities and in a manner that can achieve sustainability relative to water resources management. However, the same approach can be used elsewhere after

  14. An innovative approach to teaching bioethics in management of healthcare.

    Aleksandrova-Yankulovska, Silviya

    2016-03-01

    Bioethical courses were introduced in the curricula in medical universities in Bulgaria in 1990s. In the beginning, the courses were mainly theoretical, and systematic case analyses and discussions of movies were introduced later on. The benefits of using films to teach ethics have been previously analyzed in the literature; however, to our knowledge such studies in Bulgaria are yet lacking. The aim of this study was to survey the opinions of students and analyze the results from the application of movies in bioethics teaching in a medical university in the north of Bulgaria. A survey was carried out among 92 students in the management of healthcare. Two movies were used, and separate protocols for film discussion were developed. The study was conducted anonymously and with students' free informed consent. The students distinguished in total 21 different dilemmas and concepts in the first movie. The ethical dilemmas were classified into five groups: general ethical issues, deontological issues, special ethical issues, principles of bioethics, and theories of ethics. The second movie focused students' attention on the issues of death and dying. In total, 18 elements of palliative care were described by the students. The range of different categories was a positive indicator of an increased ethical sensitivity. The students evaluated the movies' discussions as a generally positive educational approach. They perceived the experience as contributing to their better understanding of bioethical issues. The innovative approach was well accepted by the students. The introduction of movies in the courses of bioethics had the potential to provide vivid illustrations of bioethical issues and to contribute to the exploration of specific theses and arguments. The presentation and discussion should be preceded by accumulation of theoretical knowledge. The future of effective bioethics education lays in the interactive involvement of students. © The Author(s) 2014.

  15. Exploring an innovative watershed management approach: From feasibility to sustainability

    Said, A. [Department of Civil and Environmental Engineering, University of South Florida, Tampa, FL 33620 (United States); Sehlke, G. [Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Stevens, D.K.; Sorensen, D.; Walker, W.; Hardy, T. [Civil and Environmental Department, Utah State University, Logan, UT 84321 (United States); Glover, T. [Economics Department, Utah State University, Logan, UT 84321 (United States)

    2006-10-15

    Watershed management is dedicated to solving watershed problems on a sustainable basis. Managing watershed development on a sustainable basis usually entails a balance between the needs of humans and nature, both in the present and in the future. From a watershed or water resources development basis, these problems can be classified into five general categories: lack of water quantity, deterioration in water quality, ecological impacts, weak public participation, and weak economic value. The first three categories can be combined to make up physical sustainability while the last two categories can be defined as social and economic sustainability. Therefore, integrated watershed management should be designed to achieve physical sustainability utilizing, to the greatest extent possible, public participation in an economically viable manner. This study demonstrates an innovative approach using scientific, social, and motivational feasibilities that can be used to improve watershed management. Scientific feasibility is tied to the nature of environmental problems and the scientific means to solve them. Social feasibility is associated with public participation. Motivational feasibility is related to economic stimulation for the stakeholders to take actions. The ecological impacts, lack of water quantity and deterioration in water quality are problems that need scientific means in order to improve watershed health. However, the implementation of these means is typically not achievable without the right public participation. In addition, public participation is typically accelerated by economic motivation for the stakeholders to use the resources in a manner that improves watershed health. The Big Lost River in south-central Idaho has been used as an illustration for implementing scientific, social and motivational feasibilities and in a manner that can achieve sustainability relative to water resources management. However, the same approach can be used elsewhere after

  16. PNAUM: integrated approach to Pharmaceutical Services, Science, Technology and Innovation.

    Gadelha, Carlos Augusto Grabois; Costa, Karen Sarmento; Nascimento, José Miguel do; Soeiro, Orlando Mário; Mengue, Sotero Serrate; Motta, Márcia Luz da; Carvalho, Antônio Carlos Campos de

    2016-12-01

    This paper describes the development process of the Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamentos (PNAUM - National Survey on Access, Use and Promotion of Rational Use of Medicines) based on an integrated approach to pharmaceutical services, science, technology and innovation. It starts by contextualizing health and development in Brazil and features elements of the National Policy for Science, Technology and Innovation in Health in Brazil and the National Policy for Pharmaceutical Services. On presenting pharmaceutical policy guidelines, it stresses the lack of nationwide data. This survey, commissioned by the Brazilian Ministry of Health, has two components: household survey and evaluation of pharmaceutical services in primary care. The findings point to perspectives that represent, besides the enhancement of public policy for pharmaceutical services and public health, results of government action aimed at developing the economic and industrial health care complex to improve the health conditions of the Brazilian population. RESUMO O artigo apresenta o processo de construção da Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamento a partir de uma concepção integradora da Assistência Farmacêutica, Ciência, Tecnologia e Inovação. Inicia-se contextualizando a saúde e o desenvolvimento no País e apresenta elementos da Política Nacional de Ciência Tecnologia e Inovação em Saúde no Brasil e da Política Nacional de Assistência Farmacêutica. Ao apresentar as diretrizes das Políticas Farmacêuticas, destaca-se a carência de dados de abrangência nacional. A presente pesquisa, encomendada pelo Ministério da Saúde, foi estruturada em dois componentes: inquérito domiciliar e avaliação dos serviços de assistência farmacêutica na atenção básica. As perspectivas dos resultados representam, além do incremento das políticas públicas farmacêuticas e de saúde p

  17. SCIENTIFIC/THEORETIC APPROACHES TO INNOVATIVE MANAGEMENT (WITH TRANSPORT AS AN EXAMPLE

    O. N. Dounayev

    2011-01-01

    Full Text Available Innovative management is a type of interactive activities based on a system of direct and reverse links with innovative process, the object of the management. At present, the innovative management concept is in the research and development phase as a part of the strategic management concept; the former having not yet get separated from the latter. So far as development of the innovative concept for the transport industry is concerned, the classical, evolutionary, behavior-dependent, institutional, strategic and entrepreneurship-dependent approaches are of special importance in terms of organization of the management. Key values of the transport innovative management organization system are formulated.

  18. Innovators.

    NEA Today, 2001

    2001-01-01

    Describes various innovations that have been developed to enhance education. These innovations include: helping educators help at-risk students succeed; promoting high school journalism; ensuring quality online learning experiences; developing a student performing group that uses theater to address social issues; and having students design their…

  19. Maths meets myths quantitative approaches to ancient narratives

    MacCarron, Máirín; MacCarron, Pádraig

    2017-01-01

    With an emphasis on exploring measurable aspects of ancient narratives, Maths Meets Myths sets out to investigate age-old material with new techniques. This book collects, for the first time, novel quantitative approaches to studying sources from the past, such as chronicles, epics, folktales, and myths. It contributes significantly to recent efforts in bringing together natural scientists and humanities scholars in investigations aimed at achieving greater understanding of our cultural inheritance. Accordingly, each contribution reports on a modern quantitative approach applicable to narrative sources from the past, or describes those which would be amenable to such treatment and why they are important. This volume is a unique state-of-the-art compendium on an emerging research field which also addresses anyone with interests in quantitative approaches to humanities.

  20. A Boolean Approach to Airline Business Model Innovation

    Hvass, Kristian Anders

    Research in business model innovation has identified its significance in creating a sustainable competitive advantage for a firm, yet there are few empirical studies identifying which combination of business model activities lead to success and therefore deserve innovative attention. This study...... analyzes the business models of North America low-cost carriers from 2001 to 2010 using a Boolean minimization algorithm to identify which combinations of business model activities lead to operational profitability. The research aim is threefold: complement airline literature in the realm of business model...... innovation, introduce Boolean minimization methods to the field, and propose alternative business model activities to North American carriers striving for positive operating results....

  1. TARGETED APPROACH TO MANAGING THE FINANCING OF INNOVATIVE PROJECTS

    G. G. Balayan

    2014-01-01

    Full Text Available The variant of financing the innovative project that allows you to structure any project on the standard stages, regardless of the content of the project. For decision makers, in the management system information is narrowed to a necessary and sufficient by the correct selection of data. The necessity of timely forecast of problem situations and liquidation of not bringing to the state of the problem. It is proposed to organize the state structure, the Bank of innovations, concentrating innovations and connecting inventors with investors and customers.

  2. INNOVATIVE APPROACH TO EDUCATION AND TEACHING OF STATISTICS

    Andrea Jindrová

    2010-06-01

    Full Text Available Educational and tutorial programs are being developed together, with the changing world of information technology it is a necessary course to adapt to and accept new possibilities and needs. Use of online learning tools can amplify our teaching resources and create new types of learning opportunities that did not exist in the pre-Internet age. The world is full of information, which needs to be constantly updated. Virtualisation of studying materials enables us to update and manage them quickly and easily. As an advantage, we see an asynchronous approach towards learning materials that can be tailored for the students´ needs and adjusted according to their time and availability. The specificness of statistical learning lies in various statistical programs. The high technical demands of these programs require tutorials (instructional presentations, which can help students to learn how to use them efficiently. Instructional presentation may be understood as a demonstration of how the statistical software program works. This is one of the options that students may use to simplify the utilization of control and navigation through the statistical system. Thanks to instructional presentations, students will be able to transfer their theoretical statistical knowledge into practical situation and real life and, therefore, improve their personal development process. The goal of this tutorial is to show an innovative approach for learning of statistics in the Czech University of Life Sciences. The use of presentations and their benefits for students was evaluated according to results obtained from a questionnaire survey completed by students of the 4th grade of the Faculty of Economics and Management. The aim of this pilot survey was to evaluate the benefits of these instructional presentations, and the students interest in using them. The information obtained was used as essential data for the evaluation of the efficiency of this new approach. Firstly

  3. Enhanced defence in depth: a fundamental approach for innovative nuclear systems recommended by INPRO

    Kuczera, B.; Juhn, P.E.

    2004-01-01

    In May 2001, the IAEA initiated the 'International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)'. Having in mind that nuclear power will be an important option for meeting future electricity needs, the scope of INPRO covers nuclear reactors expected to come into service in the next fifty years, together with their associated fuel cycles. This article deals with enhanced defence in depth (DID) strategy that is recommended by INPRO. This strategy is twofold: first, to prevent accidents and second, if prevention fails, to limit their potential consequences and prevent any evolution to more serious conditions. Accident prevention is the first priority. For innovative nuclear systems, the effectiveness of preventive measures should be enhanced compared with existing systems. DID is generally structured in 5 levels of protection, including successive barriers preventing the release of radioactive material to the environment. These levels are: 1) prevention of abnormal operation and failures, 2) control of abnormal operation and detection of failures, 3) control of accidents within the design basis, 4) control of severe plant conditions, including prevention and mitigation of the consequences of severe accidents, and 5) mitigation of radiological consequences of significant release of radioactive materials. In the area of nuclear safety, INPRO has set 5 principles: 1) incorporate DID as a part of the safety approach and make the 5 levels of DID more independent from each other than in current installations; 2) prevent, reduce or contain releases of radioactive or hazardous materials in any normal or abnormal plant operation; 3) incorporate increased emphasis on inherent safety characteristics and passive safety features; 4) include research and development work to bring the capability of computer codes used for the safety of innovative nuclear systems to the standard of codes used for the safety of current reactors; and 5) include a holistic life

  4. Modeling the sustainable development of innovation in transport construction based on the communication approach

    Revunova, Svetlana; Vlasenko, Vyacheslav; Bukreev, Anatoly

    2017-10-01

    The article proposes the models of innovative activity development, which is driven by the formation of “points of innovation-driven growth”. The models are based on the analysis of the current state and dynamics of innovative development of construction enterprises in the transport sector and take into account a number of essential organizational and economic changes in management. The authors substantiate implementing such development models as an organizational innovation that has a communication genesis. The use of the communication approach to the formation of “points of innovation-driven growth” allowed the authors to apply the mathematical tools of the graph theory in order to activate the innovative activity of the transport industry in the region. As a result, the authors have proposed models that allow constructing an optimal mechanism for the formation of “points of innovation-driven growth”.

  5. Innovation

    In recent years ULA has emphasized advocacy, and contributed to progress towards new legislation (freedom of information, copyright, the ... East African Community e-government strategy) of importance to the library and ... Innovation Vol.

  6. Mathematician meets Fashion designer : The future of fashion will be multidisciplinary innovation!

    Toeters, M.J.; Feijs, L.M.G.

    2016-01-01

    The fashion system recycles the same ideas over and over again, with a very low rate of innovation. We found each other at the cutting edge of fashion innovation and claim that much, much more innovation is possible. We found it is time to analyse our collaborative work and put it in the global

  7. The Elasticity-Based Approach to Enterprise Innovation

    Karbowski Adam

    2016-03-01

    Full Text Available The goal of this paper is to present a formal model of firm innovation that simultaneously analyzes innovation factors characteristic to the Schumpeterian strand of industrial organization literature and the know-how strand. Corporate R&D intensity serves here as an input measure of firm innovation. R&D intensity can be defined as a ratio of firm’s R&D spending to the firm’s sales (total revenues. On the basis of formal analysis it is found that R&D intensity is fully determined by three complementary factors, i.e. a firm’s technological competence (supply-side factor, consumer preference for quality and price of a product (demand-side factor, as well as a moderator factor associated with the knowledge spillovers, which occur between competing firms in the industry. Since the above factors are expressed in terms of elasticities, the presented model is called an elasticity-based model of firm innovation. Further, within the model framework, it is shown how horizontal R&D cooperation alleviates the free-rider problem that can discourage a firm’s innovation activities. It is next postulated that horizontal R&D cooperation can be effectively treated as a complementary tool (to such traditional solutions as patent protection and public research subsidies for solving the problem of negative externalities in an industry with pervasive knowledge spillovers.

  8. APPROACH ON THE EXISTENCE OF INNOVATION IN TOURISM

    Cristina BURGHELEA

    2015-04-01

    Full Text Available This article aimed to highlight the existence of innovation in tourism based on the international literature. From conceptualization of the research period it was found that definition can be universally valid applied in all sectors of the economy and, equally, in the tertiary sector, where there are tourist services. Coming either from English or French, "innovation" defines both a process and its results. Adapting to the constantly varying wishes of customers, innovation is a key element underpinning the survival and existence of competition in a dynamic environment that is changing radically. Current studies reveal that there are other indirect benefits of innovations such as image enhancement, improved customer loyalty, and ability to attract new ones. In this study, it was paid a special attention to the long-term prospects related to the tourism sector in countries such as Australia, Latin America, Africa, China and emerging markets such as India and Indonesia. This has resulted in tourism expenditure forecast for the period 2013 - 2019 performed using information provided by the Ministry of Business, Innovation and Employment.

  9. Who's adopting the smarter lunchroom approach? Individual characteristics of innovative food service directors.

    Gabrielyan, Gnel; Hanks, Drew S; Hoy, Kathryn; Just, David R; Wansink, Brian

    2017-02-01

    School cafeterias and, subsequently, food service directors (FSDs) play a vital role in feeding children in the U.S. This study investigates which FSDs with different characteristics and organizational affiliations are most willing to embrace and implement new programs in their cafeterias. In 2014 we surveyed a representative sample of 8143 school FSDs across the U.S. regarding their knowledge and use of innovative methods that encourage children to select healthy food options. Nearly all of the surveyed FSDs (93%) are aware of behavioral strategies to promote healthier eating in school lunchrooms, and nearly 93% report having made at least one change in their lunchroom. Male FSDs are more likely to be aware of new programs, though they are less likely to adopt them relative to female FSDs. In addition, membership in a professional organization increases awareness as well as the number of changes made by 0.14 (p<0.01). Finally, 22% of all respondents say they know about the Smarter Lunchrooms approach, a set of research-based lunchroom behavioral strategies that positively influence children to select healthy foods. The findings highlight the importance of participation in professional associations which provide career-building activities for school FSDs increasing awareness and adoption of innovative approaches to motivate children to eat the nutritious foods. Given these findings, there is reason for policy makers and school districts to consider allocating funds to encourage FSDs to engage more fully in professional association meetings and activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. A Contradiction-Based Approach for Innovative Product Design

    Ko Yao-Tsung

    2016-01-01

    Full Text Available Without creativity in design there is no potential for innovation. This paper investigates the role of contradictions in enhancing creativity in product design. Based on the inventive principles of TRIZ, this paper presents a novel design method by integrating technical and physical contradiction analysis methods into the conceptual design activities of new product development (NPD. Despite the recognized importance of innovative design, there is a lack of the systematic and effective design-thinking process that can covers all conceptual design activities. To address this gap, a sharper and fundamental model of the problem-solving is created for innovative product design based on the contradiction-oriented concept. Eventually, one case study is employed to illustrate the method and the result validates that it can help designers produce more creative outcomes in product design.

  11. The DIMBI project – innovative approaches for teaching business informatics

    Ivan Kuyumdzhiev

    2016-11-01

    Full Text Available The purpose of this article is to collect and analyze data on existing methods of teaching business informatics in leading Bulgarian universities and suggest areas for improvements. Based on a collected data guidelines for innovative teaching methods in the field of BI and DW are developed. Proposed methods are divided in several sections – lectures, exercises (groups’ size, tools used, software, hardware, teaching methods, and real life customers, students’ projects, control methods. The findings of conducted feasibility study show that the business, students and universities need an innovative methodology of teaching business informatics and properly implemented this methodology has a high probability of success. This paper is written within the Erasmus plus KA2 project “Developing the innovative methodology of teaching business informatics” (DIMBI, 2015-1-PL01-KA203-0016636.

  12. An Evolutionary Approach to Regional Systems of Innovation

    Gunnarsson, Jan Sture Gunnar; Wallin, Torsten

    This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces and product......This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces...

  13. An evolutionary approach to regional systems of innovation

    Gunnarsson, Jan Sture Gunnar; Wallin, Torsten

    2011-01-01

    This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces and product......This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces...

  14. A modular approach for stimulating knowledge use in organizations to attain real sustainable innovations

    Ad Breukel; Dr. ir. Jan Venselaar

    2010-01-01

    The Fociss (Focussing Innovation for a Sustainable Strategy) approach is a structured method to define core business related issues within sustainable development that require main attention in a specific company. In theory, Fociss has the ability for all kinds of innovations, but the implementation

  15. Characterizing and comparing innovation systems by different ‘modes’ of knowledge production: A proximity approach

    Hardeman, Sjoerd; Frenken, Koen; Nomaler, Önder; Ter Wal, Anne L. J.

    2015-01-01

    Though the concept of innovation systems has become influential in both academia and policymaking, an analytical approach to understanding innovation systems is still lacking. In particular, there is no analytical framework to measure `Mode 1? and `Mode 2? knowledge production. We propose a

  16. Innovation management from the inside: An approach from attention and everyday praxis

    Fran Morente

    2017-08-01

    Originality/value: The originality of the present study is in two sense: the conceptual framework explores innovation management for the first time through attention; under the methodological framework, we leave aside the hegemonic quantitative-structural approach, to focus the study in the everyday life of Innovation Project Managers (the organizational agents, who actually go on to implement innovation management. Thus, we elude the discursive rhetoric of innovation to cling to the real praxis, that by which organizations will get results and survive.

  17. I-WALK: An Innovative Approach to Community Walkability

    Seeger, Christopher J.; Lillehoj, Catherine J.; Jensen, Alan D.; Wilson, Suzy; Levinson, Lydia R.

    2014-01-01

    One way of combating rising obesity rates and decreasing physical activity levels among children is to promote active transportation to and from schools. The award-winning I-WALK program provides a comprehensive framework for addressing community walkability and related infrastructure. The program uses a unique and innovative methodology that…

  18. TARGET APPROACH TO PROJECT FINANCING TRANCHES OF INNOVATIONS AND INVESTMENTS

    Galina G. Balayan

    2015-01-01

    Full Text Available The article concerns the main provisions of the financing tranches for innovative projects. The article is of methodological nature. It gives theoretically justified, universal for any of the project stages and their characteristics needed to calculate efficiency project financing tranches.

  19. Forecasting the international diffusion of innovations: An adaptive estimation approach

    Y.M. van Everdingen (Yvonne); W.B. Aghina (Wouter)

    2003-01-01

    textabstractWe introduce an international, adaptive diffusion model that can be used to forecast the cross-national diffusion of an innovation at early stages of the diffusion curve. We model the mutual influence between the diffusion processes in the different social systems (countries) by mixing

  20. Innovative Development of Building Materials Industry of the Region Based on the Cluster Approach

    Mottaeva Asiiat

    2016-01-01

    Full Text Available The article discusses issues of innovative development of building materials industry of the region based on the cluster approach. Determined the significance of regional cluster development of the industry of construction materials as the effective implementation of the innovative breakthrough of the region as an important part of strategies for strengthening innovation activities may be to support the formation and development of cluster structures. Analyses the current situation with innovation in the building materials industry of the region based on the cluster approach. In the course of the study revealed a direct correlation between involvement in innovative activities on a cluster basis, and the level of development of industry of construction materials. The conducted research allowed identifying the factors that determine the innovation process, systematization and classification which determine the sustainable functioning of the building materials industry in the period of active innovation. The proposed grouping of innovations for the construction industry taking into account industry-specific characteristics that reflect modern trends of scientific and technological progress in construction. Significance of the study lies in the fact that the proposals and practical recommendations can be used in the formation mechanism of innovative development of building materials industry and the overall regional construction complex of Russian regions by creating clusters of construction.

  1. [Health care innovation from a territorial perspective: a call for a new approach].

    Costa, Laís Silveira; Gadelha, Carlos Augusto Grabois; Maldonado, José

    2012-12-01

    Innovation plays an increasingly important role in health care, partly because it is responsible for a significant share of national investment in research and development, and partly because of its industrial and service provision base, which provides a conduit to future technology. The relationship between health care and development is also strengthened as a result of the leading role of health care in generating innovation. Nevertheless, Brazil's health care production base is persistently weak, hindering both universal provision of health care services and international competitiveness. This article, based on the theoretical framework of Political Economy and innovation systems, has sought to identify variables in subnational contexts that influence the dynamic of innovation generation in health care. To this end, the theoretical approach used lies on the assumption that innovation is a contextualized social process and that the production base in healthcare will remain weak if new variables involved in the dynamic of innovation are not taken into account.

  2. Innovation

    The purpose of Innovation journal of appropriate librarianship and information work in Southern Africa is to publish material on libraries, information supply and other related matters in South and Southern Africa. Vol 45 (2012). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access ...

  3. Innovation

    Torfing, Jacob; Ricard, Lykke Margot

    2017-01-01

    Innovation i krydsfeltet mellem forskellige styringsparadigmer i offentlige organisationer. New Public Governance gør det muligt at skabe offentlig værdi på nye måder. Men NPG er ingen trylledrik, der fra den ene dag til den anden skaber balance mellem borgernes store forventninger og en trængt ø...

  4. MODELING OF INNOVATION EDUCATIONAL ENVIRONMENT OF GENERAL EDUCATIONAL INSTITUTION: THE SCIENTIFIC APPROACHES

    Anzhelika D. Tsymbalaru

    2010-01-01

    In the paper the scientific approaches to modeling of innovation educational environment of a general educational institution – system (analysis of object, process and result of modeling as system objects), activity (organizational and psychological structure) and synergetic (aspects and principles).

  5. Measuring innovation: A state of the science review of existing approaches

    Philipp ter Haar

    2018-05-01

    Originality/value: While influences on innovation are extensively discussed a comprehensive overview over the approaches to identify the effects of modifying these influences is missing. This paper intends to closes this gap.

  6. Innovative approaches for improving maternal and newborn health--A landscape analysis.

    Lunze, Karsten; Higgins-Steele, Ariel; Simen-Kapeu, Aline; Vesel, Linda; Kim, Julia; Dickson, Kim

    2015-12-17

    Essential interventions can improve maternal and newborn health (MNH) outcomes in low- and middle-income countries, but their implementation has been challenging. Innovative MNH approaches have the potential to accelerate progress and to lead to better health outcomes for women and newborns, but their added value to health systems remains incompletely understood. This study's aim was to analyze the landscape of innovative MNH approaches and related published evidence. Systematic literature review and descriptive analysis based on the MNH continuum of care framework and the World Health Organization health system building blocks, analyzing the range and nature of currently published MNH approaches that are considered innovative. We used 11 databases (MedLine, Web of Science, CINAHL, Cochrane, Popline, BLDS, ELDIS, 3ie, CAB direct, WHO Global Health Library and WHOLIS) as data source and extracted data according to our study protocol. Most innovative approaches in MNH are iterations of existing interventions, modified for contexts in which they had not been applied previously. Many aim at the direct organization and delivery of maternal and newborn health services or are primarily health workforce interventions. Innovative approaches also include health technologies, interventions based on community ownership and participation, and novel models of financing and policy making. Rigorous randomized trials to assess innovative MNH approaches are rare; most evaluations are smaller pilot studies. Few studies assessed intervention effects on health outcomes or focused on equity in health care delivery. Future implementation and evaluation efforts need to assess innovations' effects on health outcomes and provide evidence on potential for scale-up, considering cost, feasibility, appropriateness, and acceptability. Measuring equity is an important aspect to identify and target population groups at risk of service inequity. Innovative MNH interventions will need innovative

  7. The art of 'doing' sustainable agricultural innovation: approaches and attitudes to facilitating transitional projects

    Loeber, A.; Vermeulen, T.; Barbier, M.; Elzen, B.

    2012-01-01

    The management of projects for sustainable innovation is characterised by a variety of intricacies. Facilitators play a central role in dealing with these challenges. Adopting an empirical approach, this chapter discusses the practical approaches and attitudes that facilitators develop to deal with such challenges in the domain of agricultural innovation. To that end, the paper presents a list of four intricacies inherent in running projects that seek to enhance sustainable development, based...

  8. Innovative Graded Approach to D and D Configuration Management

    Kronvall, C.M.; Muller, F.J.; Spencer, R.S.

    2009-01-01

    CH2M Hill Plateau Remediation Contract personnel have developed and implemented an innovative, graded approach to Configuration Management for use in the Decontamination and Decommissioning (D and D) of Nuclear Facilities. The Work Package Configuration Management (WPCM) (1) process is a change management process that inserts engineering rigor into a work package to ensure safe modification to a Structure, System, or Component (SSC). Sketches, historical drawings, or other tools may be used within the process. Traditional configuration management requires that design documentation be prepared, reviewed, approved, and placed into a stand alone data management system. Following of approval for construction/modification, the design package is placed into a work package. The work package adds installation instructions and proceeds through a separate review and approval prior to being placed into a second data management system. The practice allows for the separate tracking and retrieval of design and maintenance/construction information. During D and D of a facility where the equipment is being 100% removed and/or the facility is being reduced to 'slab-on-grade', there is minimal value in maintaining a stand alone design history that simply shows a blank drawing where a SSC, or facility used to be. As a way of streamlining the D and D process, the design media is included as a part of the work package that authorizes the work process. Instead of two separate reviews and documentation of information in two separate databases, the design media is reviewed/approved once as a part of the work package process. As an additional means of streamlining the D and D process, the design may include Computer Aided Design (CAD) 3-Dimensional (3-D) multiple diagrams that show the progressive states of equipment removal/facility demolition rather than a single simple 'before and after' diagram. The added graphics flexibility allows field staff to track progress and can be used as a

  9. Dynamic capabilities and innovation management: a conceptual approach

    Jose Javier Aguilar Zambrano

    2006-07-01

    Full Text Available Organizational capabilities are those behavioral routines oriented to develop a specific task (NELSON; WINTER, 1982. These capabilities define what the company knows to do and how must to do it. Nevertheless, the repetitive character of these capabilities could be producing stopped processes (METCALFE, 1995 which both limit the generation of new capabilities and diminishing the dynamism in the production, reproduction and reconfiguration of new capabilities (TEECE; PISANO, 1997. This article compares and analyzes different theoretical-conceptual perspectives for generation and reconfiguration of technological capabilities within an organization. Additionally this article suggests that dynamic capabilities to make feasible innovation processes within an organization. The general concept of dynamic capacities will be used like driver of changes to produce and reconfigurate capabilities in the organization. The glance of the dynamic capabilities allows understanding the complexity of the creation, development and use of capabilities. This understanding could constitute material fundamental to manage learning processes and organizational change oriented to innovation.

  10. Beyond the Thumbrule Approach: Regulatory Innovations for Bioprospecting in India

    Kabir Sanjay Bavikatte and Morten Walløe Tvedt

    2015-06-01

    Full Text Available In the wake of the Nagoya Protocol on Access and Benefit Sharing (ABS, there is unprecedented attention on good Green Governance, which implies the development of resource efficient, rights based and effective domestic frameworks to regulate bioprospecting. India has been pioneering in this regard due to its ABS legislation in 2002 that long preceded the Nagoya Protocol. However much has changed since 2002 and while India has learnt a great deal from its ‘learning by doing’ method, there are valuable lessons that can be learnt from innovations in the ABS frameworks of other countries. The innovations of these countries are a great resource for National Biodiversity Authority (NBA in India that is seeking to make the processing of the bioprospecting applications in India more optimal. The current paper highlights the challenges faced by the NBA in processing the high volumes of bioprospecting applications, analyses the reasons for such challenges and proposes solutions for the same.

  11. 77 FR 12235 - Meeting of the National Advisory Council on Innovation and Entrepreneurship

    2012-02-29

    ... Entrepreneurship will hold a meeting on Tuesday, March 13, 2012. The open meeting will be conducted from 10 a.m.-1 p.m. and will be open to the public. The meeting will take place at Gallier Hall, 545 St. Charles.... Time: 10 a.m.-1 p.m. (CST). ADDRESSES: Gallier Hall, 545 St. Charles Avenue, New Orleans, LA 70130...

  12. Renewable Energy Innovations in Europe: A Dynamic Panel Data Approach

    Nadia Ayari; Szabolcs Blazsek; Pedro Mendi

    2009-01-01

    Abstract We investigate the determinants of renewable energy R&D intensity and the impact of renewable energy innovations on firm performance, using several dynamic panel data models. We estimate these models using a large data set of European firms from 19 different countries, with some patenting activity in areas related with renewable energies during the 1987-2007 period. Our results confirm our priors on the determinants of the rapid development of renewable energy R&D intensit...

  13. Probabilistic seasonal Forecasts to deterministic Farm Leve Decisions: Innovative Approach

    Mwangi, M. W.

    2015-12-01

    Climate change and vulnerability are major challenges in ensuring household food security. Climate information services have the potential to cushion rural households from extreme climate risks. However, most the probabilistic nature of climate information products is not easily understood by majority of smallholder farmers. Despite the probabilistic nature, climate information have proved to be a valuable climate risk adaptation strategy at the farm level. This calls for innovative ways to help farmers understand and apply climate information services to inform their farm level decisions. The study endeavored to co-design and test appropriate innovation systems for climate information services uptake and scale up necessary for achieving climate risk development. In addition it also determined the conditions necessary to support the effective performance of the proposed innovation system. Data and information sources included systematic literature review, secondary sources, government statistics, focused group discussions, household surveys and semi-structured interviews. Data wasanalyzed using both quantitative and qualitative data analysis techniques. Quantitative data was analyzed using the Statistical Package for Social Sciences (SPSS) software. Qualitative data was analyzed using qualitative techniques, which involved establishing the categories and themes, relationships/patterns and conclusions in line with the study objectives. Sustainable livelihood, reduced household poverty and climate change resilience were the impact that resulted from the study.

  14. Modelling efficient innovative work: integration of economic and social psychological approaches

    Babanova Yulia

    2017-01-01

    Full Text Available The article deals with the relevance of integration of economic and social psychological approaches to the solution of enhancing the efficiency of innovation management. The content, features and specifics of the modelling methods within each of approaches are unfolded and options of integration are considered. The economic approach lies in the generation of the integrated matrix concept of management of innovative development of an enterprise in line with the stages of innovative work and the use of the integrated vector method for the evaluation of the innovative enterprise development level. The social psychological approach lies in the development of a system of psychodiagnostic indexes of activity resources within the scope of psychological innovative audit of enterprise management and development of modelling methods for the balance of activity trends. Modelling the activity resources is based on the system of equations accounting for the interaction type of psychodiagnostic indexes. Integration of two approaches includes a methodological level, a level of empirical studies and modelling methods. There are suggested options of integrating the economic and psychological approaches to analyze available material and non-material resources of the enterprises’ innovative work and to forecast an optimal option of development based on the implemented modelling methods.

  15. Innovation

    2012-01-01

    Présenté par FutuRIS, plate-forme prospective sur la recherche, l’innovation et la société animée par l’Association Nationale de la Recherche et de la Technologie, ce volume livre un panorama du système français de recherche et d’innovation dans son environnement européen. Sont abordés dans une première partie les champs décisionnels concernés, les politiques nationales menées en matière de R&D, les relations entre enseignement supérieur et recherche et l’Espace européen de la recherche à l’h...

  16. INNOVATION

    Helms, Niels Henrik

    2012-01-01

    Kravet om innovation og kreativitet er på flere måder en stor og en ny udfordring for voksenuddannelserne. Det udfordrer det didaktiske dilemma, det at vi skal gøres til kompetente og frie mennesker gennem pædagogiske handlinger, som netop pålægger os en ufrihed. – Men hvor denne ufrihed tidligere...... kunne begrundes med, at skolen eller uddannelsen vidste bedre, så er det ikke længere tilfældet. Skolen skal sørge for, at vi lærer noget – og ikke noget andet. Men det kan ikke længere med bestemthed afgøres, hvad det er vi skal lære i skolen, fordi det nye, det kreative og ikke mindst innovative...

  17. Innovations in uranium exploration, mining and processing techniques, and new exploration target areas. Proceedings of a technical committee meeting held in Vienna, 5-8 December 1994

    NONE

    1996-03-01

    In 1994 there were 432 nuclear power plants in operation with a combined electricity generating capacity of 340 347 MWe. To achieve this, 58,000 tonnes of uranium were required as nuclear fuel. In view of its economic importance, the International Atomic Energy Agency has had a long-standing interest in uranium exploration, resources, production and demand. This is reflected in numerous publications covering different aspects of this field. Particularly worth mentioning is the periodical ``Uranium Resources, Production and Demand``, published jointly with the Nuclear Energy Agency of the OECD. Its fourteenth edition was published in early 1994. It was the objective of this Technical Committee meeting, the proceedings of which are presented in this TECDOC, to bring together specialists in the field and to collect information on new developments in exploration, mining techniques and innovative methods of processing that are more environmentally friendly. The meeting was attended by a total of 22 participants from 14 countries. Eleven papers were presented describing new exploration areas, improvements in processing methods, new mining techniques for the extraction of high grade ore, and innovative approaches for site reclamation. Two working groups were organized and dealt with the analysis of world uranium resources and the new direction of research in mining and ore processing. Refs, figs, tabs.

  18. An Integrated Open Approach to Capturing Systematic Knowledge for Manufacturing Process Innovation Based on Collective Intelligence

    Gangfeng Wang

    2018-02-01

    Full Text Available Process innovation plays a vital role in the manufacture realization of increasingly complex new products, especially in the context of sustainable development and cleaner production. Knowledge-based innovation design can inspire designers’ creative thinking; however, the existing scattered knowledge has not yet been properly captured and organized according to Computer-Aided Process Innovation (CAPI. Therefore, this paper proposes an integrated approach to tackle this non-trivial issue. By analyzing the design process of CAPI and technical features of open innovation, a novel holistic paradigm of process innovation knowledge capture based on collective intelligence (PIKC-CI is constructed from the perspective of the knowledge life cycle. Then, a multi-source innovation knowledge fusion algorithm based on semantic elements reconfiguration is applied to form new public knowledge. To ensure the credibility and orderliness of innovation knowledge refinement, a collaborative editing strategy based on knowledge lock and knowledge–social trust degree is explored. Finally, a knowledge management system MPI-OKCS integrating the proposed techniques is implemented into the pre-built CAPI general platform, and a welding process innovation example is provided to illustrate the feasibility of the proposed approach. It is expected that our work would lay the foundation for the future knowledge-inspired CAPI and smart process planning.

  19. An innovative approach to multimedia waste reduction: Measuring performance for environmental cleanup projects

    Phifer, B.E. Jr.; George, S.M.

    1993-04-01

    One of the greatest challenges we now face in environmental cleanup is measuring the progress of minimizing multimedia transfer releases and achieving waste reduction. Briefly, multimedia transfer refers to the air, land, and water where pollution is not controlled, concentrated, and moved from one medium to another. An example of multimedia transfer would be heavy metals in wastewater sludges moved from water to land disposal. Over $2 billion has been budgeted for environmental restoration site cleanups by the Department of Energy (DOE) for FY 1994. Unless we reduce the huge waste volumes projected to be generated in the near future, then we will devote more and more resources to the management and disposal of these wastes. To meet this challenge, the Martin Marietta Energy Systems, Inc., Oak Ridge Environmental Restoration (ER) Program has explored the value of a multimedia approach by designing an innovative Pollution Prevention Life-Cycle Model. The model consists of several fundamental elements (Fig. 1) and addresses the two major objectives of data gathering and establishing performance measures. Because the majority of projects are in the remedial investigation phase, the focus is on the prevention of unnecessary generation of investigation-derived waste and multimedia transfers at the source. A state-of-the-art tool developed to support the life-cycle model for meeting these objectives is the Numerical Scoring System (NSS), which is a computerized, user-friendly data base system for information management, designed to measure the effectiveness of pollution prevention activities in each phase of the ER Program. This report contains a discussion of the development of the Pollution Prevention Life-Cycle Model and the role the NSS will play in the pollution prevention programs in the remedial investigation phase of the ER Program at facilities managed by Energy Systems for DOE

  20. Comprehensive Analysis Competence and Innovative Approaches for Sustainable Chemical Production.

    Appel, Joerg; Colombo, Corrado; Dätwyler, Urs; Chen, Yun; Kerimoglu, Nimet

    2016-01-01

    Humanity currently sees itself facing enormous economic, ecological, and social challenges. Sustainable products and production in specialty chemistry are an important strategic element to address these megatrends. In addition to that, digitalization and global connectivity will create new opportunities for the industry. One aspect is examined in this paper, which shows the development of comprehensive analysis of production networks for a more sustainable production in which the need for innovative solutions arises. Examples from data analysis, advanced process control and automated performance monitoring are shown. These efforts have significant impact on improved yields, reduced energy and water consumption, and better product performance in the application of the products.

  1. Changing Approaches Towards Open Education, Innovation and Research in Tourism

    Liburd, Janne J.; Hjalager, Anne-Mette

    2010-01-01

    There is a widely held assumption that the Internet provides opportunities to rethink and reorganise the knowledge ineraction and dissemination between industry, education and research. Web 2.0 technologies are emerging as teaching and learning tools, but there is still no striking evidence...... source education in tourism are outlined. Finally, we point out collaboraborative challenges for international tourism research and teaching....... to support the above-mentioned assumption. Accordingly, the puposes of this article are to, first, discuss the challenges in tourism education and address in brief the declining role of universities as learning monopolies and their emerging role as knowledge mediators. Second, to present open innovation...

  2. Action plan against declining vineyards: An innovative approach

    Riou Christophe

    2016-01-01

    Full Text Available Declining vineyards are assessed by a multi-year decrease in vine productivity and/or its sudden premature or gradual death, based on multiple factors. Since 2015, the French wine sector has been working on an original study to identify new research avenues while launching an innovative action plan to combat vineyard decline. First, a statistical analysis enabled to estimate research efforts in the different countries. 70 factors susceptible to contribute to vineyard decline were then identified by analyzing more than 500 publications. These factors are biological, physical or linked to growing practices. While the role of pathogens is fairly well-known, the impact of the land plot or the soil on decline is less understood. Secondly, a prospective methodology was used to better identify viticulture system factors and levers affecting vines. It was thus demonstrated that yield and longevity are strongly linked to agronomy, economic variables and plant matter, plant physiology, disease, etc... These are the key issues and leverage actions to combat more strongly vineyard decline. The matrix analysis was then complemented by interviews and statistical data to imagine leverage actions. The strategic action plan is focused on four objectives: promoting training of good practices, improving plant production organization, developing vineyard observation networks, implementing an innovative research plan.

  3. An innovative funnel and gate approach to groundwater remediation

    Johnson, D.O.; Wilkey, M.L.; Willis, J.M.

    1996-01-01

    The US Department of Energy, office of Science and Technology (EM-50) sponsored a demonstration project of the Barrier Member Containment Corporation's patented EnviroWall trademark system at the Savannah River site. With this system, contaminated groundwater can be funneled into a treatment system without pumping the contaminated water to the surface. The EnviroWall trademark barrier and pass-through system, an innovative product of sic years of research and development, provides a means to enhance groundwater flow on the upgradient side of an impermeable wall and direct it to an in situ treatment system. The EnviroWall trademark system is adaptable to most site conditions. Remedial applications range form plume containment to more robust designs that incorporate groundwater manipulation coupled with in situ treatment. Several key innovations of the EnviroWall trademark system include the following: a method for guide box installation; a means for using interlocking seals at vertical seams; a down-hole video camera for inspecting seams and panels, installation of horizontal- and vertical-collection systems; installation of vertical monitoring wells and instrumentation on each side of the barrier; site-specific backfill design; and a pass-through system for funneling groundwater into a treatment system

  4. Where international entrepreneurship and innovation meet : a culture of life long learning?

    Ulijn, J.M.

    2008-01-01

    Inaugural address, delivered in abridged form on the occasion of the public acceptance of the professorship in International Entrepreneurship, Innovation and Culture at the Open University of The Netherlands, Heerlen, 31 Oct. 2008.

  5. Meeting the Imperative to Improve Physician Well-being: Assessment of an Innovative Program

    Arnetz, Bengt B.; Christensen, John F.; Homer, Louis

    2007-01-01

    BACKGROUND Improving physician health and performance is critical to successfully meet the challenges facing health systems that increasingly emphasize productivity. Assessing long-term efficacy and sustainability of programs aimed at enhancing physician and organizational well-being is imperative. OBJECTIVE To determine whether data-guided interventions and a systematic improvement process to enhance physician work-life balance and organizational efficacy can improve physician and organizational well-being. DESIGN AND PARTICIPANTS From 2000 to 2005, 22–32 physicians regularly completed 3 questionnaires coded for privacy. Results were anonymously reported to physicians and the organization. Data-guided interventions to enhance physician and organizational well-being were built on physician control over the work environment, order in the clinical setting, and clinical meaning. MEASUREMENTS Questionnaires included an ACP/ASIM survey on physician satisfaction, the Maslach Burnout Inventory (MBI), and the Quality Work Competence (QWC) survey. RESULTS Emotional and work-related exhaustion decreased significantly over the study period (MBI, p = 0.002; QWC, p = 0.035). QWC measures of organizational health significantly improved initially and remained acceptable and stable during the rest of the study. CONCLUSIONS A data-guided program on physician well-being, using validated instruments and process improvement methods, enhanced physician and organizational well-being. Given the increases in physician burnout, organizations are encouraged to urgently create individual and systems approaches to lessen burnout risk. PMID:17891503

  6. Meeting the imperative to improve physician well-being: assessment of an innovative program.

    Dunn, Patrick M; Arnetz, Bengt B; Christensen, John F; Homer, Louis

    2007-11-01

    Improving physician health and performance is critical to successfully meet the challenges facing health systems that increasingly emphasize productivity. Assessing long-term efficacy and sustainability of programs aimed at enhancing physician and organizational well-being is imperative. To determine whether data-guided interventions and a systematic improvement process to enhance physician work-life balance and organizational efficacy can improve physician and organizational well-being. From 2000 to 2005, 22-32 physicians regularly completed 3 questionnaires coded for privacy. Results were anonymously reported to physicians and the organization. Data-guided interventions to enhance physician and organizational well-being were built on physician control over the work environment, order in the clinical setting, and clinical meaning. Questionnaires included an ACP/ASIM survey on physician satisfaction, the Maslach Burnout Inventory (MBI), and the Quality Work Competence (QWC) survey. Emotional and work-related exhaustion decreased significantly over the study period (MBI, p = 0.002; QWC, p = 0.035). QWC measures of organizational health significantly improved initially and remained acceptable and stable during the rest of the study. A data-guided program on physician well-being, using validated instruments and process improvement methods, enhanced physician and organizational well-being. Given the increases in physician burnout, organizations are encouraged to urgently create individual and systems approaches to lessen burnout risk.

  7. When Prototyping Meets Storytelling. Practices and Malpractices in Innovating Software Firms

    Ciriello, Raffaele; Richter, Alexander; Schwabe, Gerhard

    2017-01-01

    Storytelling is an important but often underestimated practice in software engineering. Whereas existing research widely regards storytelling as creating a common understanding between developers and users, we argue that storytelling and prototyping are intertwined practices for innovators...... to persuade decision makers. Based on a two-year qualitative case study in two innovating software firms, we identify and dialectically examine practices of storytelling and prototyping. Our study implies that storytelling and prototyping should be integrated together into software engineering methods....

  8. An innovative approach for energy generation from waves

    Al-Habaibeh, A. [Advanced Design and Manufacturing Engineering Centre, School of Architecture, Design and the Built Environment, Nottingham Trent University (United Kingdom); Su, D. [School of Architecture, Design and the Built Environment, Nottingham Trent University (United Kingdom); McCague, J. [Technical Director, Ocean Navitas Ltd., Lincolnshire (United Kingdom); Knight, A. [Marketing and Communications Manager, Ocean Navitas Ltd., Lincolnshire (United Kingdom)

    2010-08-15

    Sustainable energy generation is becoming increasingly important due to the expected limitations in current energy resources and to reduce pollution. Wave energy generation has seen significant development in recent years. This paper describes an innovative system for generating energy from wave power. A complete description of the system is presented including the general concept, configurations, mechanical design, electrical system, simulation techniques and expected power output of the system. The results from the hydraulic linear wave simulator, using a real wave profiles captured at a location in the UK using an ultrasound system, it was seen that a {+-}0.8 m wave at 10 s time period, produced a conditioned power output of approximately 22 kW at optimum load conditions for the tested 3-phase 44 kW permanent magnet generator type STK500. The results indicate that this new technology could provide an efficient and low cost method of generating electricity from waves. (author)

  9. An innovative approach for energy generation from waves

    Al-Habaibeh, A.; Su, D.; McCague, J.; Knight, A.

    2010-01-01

    Sustainable energy generation is becoming increasingly important due to the expected limitations in current energy resources and to reduce pollution. Wave energy generation has seen significant development in recent years. This paper describes an innovative system for generating energy from wave power. A complete description of the system is presented including the general concept, configurations, mechanical design, electrical system, simulation techniques and expected power output of the system. The results from the hydraulic linear wave simulator, using a real wave profiles captured at a location in the UK using an ultrasound system, it was seen that a ±0.8 m wave at 10 s time period, produced a conditioned power output of approximately 22 kW at optimum load conditions for the tested 3-phase 44 kW permanent magnet generator type STK500. The results indicate that this new technology could provide an efficient and low cost method of generating electricity from waves.

  10. An innovative approach study “Health students example”

    Akyurt Nuran

    2017-01-01

    Full Text Available Globalization; A process of international integration arising from the exchange of products, ideas, cultures and worldviews. Globalization is an economic as well as political, technological and cultural process. As in other areas, technological developments have brought innovations into the training of health care workers, as well as access to information and the use of this information. These developments necessitated new orientations in the education systems of health students. In this study, the effects of computer assisted instructions involving the topics of medical and vocational terminology course on the attitudes and academic achievement levels of students’ use of medical and vocational terms were investigated. Marmara University Health Services Vocational School Medical Imaging students constitute the sample of the research. In the experimental group, medical and vocational terminology topics were processed and tested by computer aided instruction method for 12 weeks.

  11. Innovative approaches for addressing old challenges in component importance measures

    Rocco S, Claudio M.; Ramirez-Marquez, Jose Emmanuel

    2012-01-01

    Importance measures (IM) are component related indices that allow assessing how a component in a system affects one or more system level performance functions. While several IM have been presented in the literature, challenges still remain with respect to the following: (1) multiple ranking—multiple perspective, (2) multi-component importance and, (3) multi-function importance. To address these challenges, this paper proposes set of innovative solutions based on several available techniques: Hasse diagram, Copeland score and Multi-objective optimization. As such, the purpose of this research is twofold: first propose solutions and second foster new research to address these challenges. Each of the proposed solutions is exemplified with a working example.

  12. The snake geothermal drilling project. Innovative approaches to geothermal exploration

    Shervais, John W. [Utah State Univ., Logan, UT (United States); Evans, James P. [Utah State Univ., Logan, UT (United States); Liberty, Lee M. [Boise State Univ., ID (United States); Schmitt, Douglas R. [University of Alberta, Canada; Blackwell, David D. [Southern Methodist Univ., Dallas, TX (United States)

    2014-02-21

    The goal of our project was to test innovative technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correlate lithologies observed in core with surface based geophysical studies. Compiled data included geologic maps, volcanic vent distribution, structural maps, existing well logs and temperature gradient logs, groundwater temperatures, and geophysical surveys (resistivity, magnetics, gravity). New data included high-resolution gravity and magnetic surveys, high-resolution seismic surveys, three slimhole test wells, borehole wireline logs, lithology logs, water chemistry, alteration mineralogy, fracture distribution, and new thermal gradient measurements.

  13. Reinventing project management the diamond approach to successful growth & innovation

    Shenhar, Aaron J.

    2007-01-01

    Projects are the engines that drive innovation from idea to commercialization. In fact, the number of projects in most organizations today is expanding while operations is shrinking. Yet, since many companies still focus on operational excellence and efficiency, most projects fail--largely because conventional project management concepts cannot adapt to a dynamic business environment. Moreover, top managers neglect their company's project activity, and line managers treat all their projects alike--as part of operations. Based on an unprecedented study of more than 600 projects in a variety of businesses and organizations around the globe, "Reinventing Project Management" provides a new and highly adaptive model for planning and managing projects to achieve superior business results.

  14. A systematic approach for introducing innovative product design in courses with engineering and nonengineering students.

    Patterson, P E

    2007-01-01

    In our new global economy, biomedical product development teams need to be even more innovative in an environment constrained by fewer resources with less time from concept to market. Teams are often comprised of individuals spread around the world. To simulate this setting, we revised an existing course to incorporate teams of on-campus and distance students, with each team including both engineers and other specialties. Through interactive lectures and projects, we presented a systematic approach to innovation that should be useful to engineers and non-engineers alike. Students found the course challenging and exciting, displaying an improved ability to work in distributed teams and in developing innovative design solutions.

  15. Process Approach to Formation of the Strategy of Innovation Development of Enterprises

    Yukhymenko Vita V.

    2013-12-01

    Full Text Available The article considers the process of formation of the strategy of innovation development on the basis of the process approach. The author studies and identifies the most significant cause-effect interrelations between the factors that influence efficiency of the process of formation of the strategy of innovation development of enterprises and their consequences. The article offers a process approach to building the K. Ishikawa diagram based on empirical assessment of management of business processes at railway engineering enterprises. The author’s approach would help solving multiple problems of railway engineering and also could be used in other sectors of economy.

  16. Collaborative working between Higher Education Institutions and Charitable Organisations – an innovative approach

    Trueman, Ian; Kane, Ros; Sanderson, Sue; Nelson, David

    2016-01-01

    Collaborative Working between Higher Education Institutions and Charitable Organisations – an innovative approach. This presentation aims to help participants understand the benefits from working with third sector charitable organisations and consider some of the challenges associated with two organisations having different approaches to education provision.

  17. "GARDEN OF CHILDHOOD" as an Innovative Approach to Training and Education of Children at Preschool Institutions

    Alekseeva, Larisa; Shkolyar, Luidmila; Savenkova, Luibov

    2016-01-01

    The authors reveal an innovative approach to training and education of preschool children. This approach is called "GARDEN OF CHILDHOOD". It is based on the idea that the development of the preschool child's personality should be joyous and free "cultural self-creation" in terms of the collective co-creation, where adults and…

  18. The art of 'doing' sustainable agricultural innovation: approaches and attitudes to facilitating transitional projects

    Loeber, A.; Vermeulen, T.; Barbier, M.; Elzen, B.

    2012-01-01

    The management of projects for sustainable innovation is characterised by a variety of intricacies. Facilitators play a central role in dealing with these challenges. Adopting an empirical approach, this chapter discusses the practical approaches and attitudes that facilitators develop to deal with

  19. Innovation in project-based companies - A case study in different approaches to organisational change

    Grex, Sara

    2004-01-01

    This paper asks how project-based organizations can be developed in order to establish and sustain innovation. The question is being explored by examining and comparing two approaches to organizational change. One approach emphasizes planning, regulation and control and creation of changes through...

  20. THE INCREASE OF ENTERPRISES’ INNOVATIVE DEVELOPMENT BASED ON THE NETWORK APPROACH

    Olena Gudz

    2018-01-01

    Full Text Available The purpose of the paper is studying the role and problems of the innovative development of domestic enterprises, discovering the factors that influence these processes. Methodology. The methodology for the study was based on logical and historical methods, methods of the system-functional approach, methods of scientific abstraction, systematization, grouping, generalization and formalization, analysis and synthesis, economic and statistical methods, and method of questioning and peer review. Results. It is studied the essence and substantiated the expediency of the network approach use, it is outlined its capabilities and limitations, determined the effectiveness of network innovation structures, and developed the proposals for activating the innovative development of enterprises in new dimensions of the economic space based on the network approach. Practical implications. The proposed measures will promote the activation of innovative development for domestic enterprises, improve the quality of business chains, competitiveness and management structures, and provide the development of new market segments. Value/originality. The information background for the paper was the official data of the State Statistics Service of Ukraine, statistical and financial statements of enterprises, rating estimates by the international agency Bloomberg Rankings, analytical report “Global Innovation Index” (World Intellectual Property Organization, WIPO, the report of the European Innovation Scoreboard, scientific publications of domestic and foreign researchers, normative reference literature, analytical and logical generalizations and observations of authors, Internet information resources.

  1. Innovative Approach to Validation of Ultraviolet (UV) Reactors for Disinfection in Drinking Water Systems

    Slide presentation at Conference: ASCE 7th Civil Engineering Conference in the Asian Region. USEPA in partnership with the Cadmus Group, Carollo Engineers, and other State & Industry collaborators, are evaluating new approaches for validating UV reactors to meet groundwater & sur...

  2. Job-sharing: an innovative approach for administration.

    Foster, D; Wilcox, C; Gibson, H

    1992-01-01

    A job-sharing arrangement for the Assistant Directors of Physiotherapy at the Royal Jubilee Hospital proved to be an innovative and successful experience demonstrating the feasibility of job-sharing at administrative levels in rehabilitation. Physiotherapy is traditionally a female dominated profession. By the time therapists are most highly skilled and clinically experienced, they have arrived at prime marriage and child-bearing years. Many valuable members are lost to the profession each year as therapists leave the work force to take care of their families, continue their education and participate in recreational activities. Alternative employment opportunities are needed to retain and return therapists to the work force. Convenience of work time is often important. Financial expectations may become a secondary consideration. A search of the literature revealed that while job-sharing has much to recommend it, it is not yet generally accepted in most health professional situations. A few anecdotal references described job-sharing in nursing. An industry-wide literature search revealed few references to the application of job-sharing at administrative levels.

  3. Innovative Approach for Developing Spacecraft Interior Acoustic Requirement Allocation

    Chu, S. Reynold; Dandaroy, Indranil; Allen, Christopher S.

    2016-01-01

    The Orion Multi-Purpose Crew Vehicle (MPCV) is an American spacecraft for carrying four astronauts during deep space missions. This paper describes an innovative application of Power Injection Method (PIM) for allocating Orion cabin continuous noise Sound Pressure Level (SPL) limits to the sound power level (PWL) limits of major noise sources in the Environmental Control and Life Support System (ECLSS) during all mission phases. PIM is simulated using both Statistical Energy Analysis (SEA) and Hybrid Statistical Energy Analysis-Finite Element (SEA-FE) models of the Orion MPCV to obtain the transfer matrix from the PWL of the noise sources to the acoustic energies of the receivers, i.e., the cavities associated with the cabin habitable volume. The goal of the allocation strategy is to control the total energy of cabin habitable volume for maintaining the required SPL limits. Simulations are used to demonstrate that applying the allocated PWLs to the noise sources in the models indeed reproduces the SPL limits in the habitable volume. The effects of Noise Control Treatment (NCT) on allocated noise source PWLs are investigated. The measurement of source PWLs of involved fan and pump development units are also discussed as it is related to some case-specific details of the allocation strategy discussed here.

  4. A perspective on open innovation in small- and medium-sized enterprises in South Africa, and design requirements for an open innovation approach

    Krause, Willie

    2015-05-01

    Full Text Available This paper provides key results from an exploratory research study aimed at understanding the current landscape in small- and medium-sized enterprises (SMEs in South Africa with regard to their appetite for, and use of, open innovation. The survey, which was conducted within a contained group of SMEs that belong to business network groups on LinkedIn, explored the current use and perception of open innovation. It was found that collaboration is the approach most preferred by the SMEs surveyed, with customers and suppliers as their preferred innovation partners. Based on the findings of the survey, this paper proposes 25 design requirements, grouped into five functional categories, for an open innovation approach. The design requirements have been developed as a primer to a more complete open innovation approach for SMEs.

  5. Innovations and Innovative Approaches or Pseudo-Innovations in the Context of General Globalization? It’s Time to Wake Up!

    Tchernev, Georgi

    2018-01-01

    Globalisation, scientific and technical progress are the basis of numerous innovative therapies for oncologic and non-oncologic diseases. It is another matter how much and by whom they are desired, and whether they have to be applied. When and how often? Innovative approaches should go towards simplification, universal distribution and application while at the same time analysis between the potential initial investment and the achieved final result should be made. An illustrative example for this is the targeted therapy for melanoma with its low baseline criteria or basic rules for its surgical treatment. Another example could be the confocal microscopy in the context of dysplastic nevus syndrome. Therapies for various autoimmune diseases should also be considered critically. In the current OAMJMS issue, as well as in some of our other ideas and statements reported also in OAMJMS, we are trying to answer at least to a part of these dilemmas, to provoke a critical point of view and to ask some simple questions: “Should any innovation be considered as a face value? Which is potentially beneficial for our patients? How could we regulate the processes to minimise the need for expensive medications for certain diseases? And, of course, we are also turning to our own mistakes by visualising the results of them! PMID:29483969

  6. 78 FR 35604 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    2013-06-13

    ..., and companies nominated for the 2012 NMTI. DATES: The meeting will convene Wednesday, June 26, 2013... Commerce Ethics Division presentation and question and answer session which may be closed to protect the...

  7. 76 FR 68167 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    2011-11-03

    ... companies nominated for the 2011 NMTI Medal. DATES: The meeting will convene Friday, November 18, 2011, at... Commerce Ethics Division presentation and question and answer session which may be closed to protect the...

  8. 75 FR 40856 - Federal Register Meeting Notice; Webinar About Regional Innovation Clusters RFP

    2010-07-14

    ... potential Offerors about the Regional Innovation Clusters RFP. For more information please go to http://www.sba.gov/clusters/index.html . The RFP may be found on http://www.fedbizopps.gov . Logistical Information: The webinar will be held on Thursday, July 15, 2010. For details, please visit http://www.sba.gov...

  9. AN INNOVATIVE APPROACH TO TEACHING THE SUBJECT «TECHNOLOGY» IN THE SECONDARY SCHOOL

    Marina Viktorovna Sleptsova

    2015-02-01

    Full Text Available The article describes the author approach to the teaching of the subject «Technology» in a secondary school. Feature of the proposed approach is its focus on innovation behavior of students in the context of continuous technological education, aimed at the continuous creation of new or modification of existing technical and social systems, reducing the cost of resources, the achievement of high commercial effect. Shows an example of an innovative approach to teaching the subject «Technology of cooking» section of the «Cooking» of the Federal model programme «Technology». The role and place of the subject «Technology» in the psychological preparation of students for entrepreneurship, the formation of «habits of success», even at school age to play the «role model» entrepreneur in the field of industrial production, innovation and agriculture. Demonstrated an innovative approach to teaching the subject «Techno-logy» for productive socialization and social adaptation of graduates of secondary schools.Summary: identify ways and methods of performing teaching staff in secondary schools social order to prepare students for entrepreneurial activity.Methodology: theoretical analysis of the literature, scientific methods of comparison, ge-neralization, systematic approach.Results: the proposed innovative approach to the teaching of the subject «Technology» in a secondary school leads to increased interest in academic subject in grades 9-11 secondary schools, the development of students in sustainable entrepreneurial skills, increase the number of high school graduates, focusing on entrepreneurial activities in the fields of innovation and industrial production, craft activities and agriculture.Practical implication: pedagogy of secondary school.

  10. Innovation in urban agriculture: Evaluation data of a participatory approach (ROIR).

    Zoll, Felix; Specht, Kathrin; Siebert, Rosemarie

    2016-06-01

    The data in this article represent an evaluation of a participatory process called Regional Open Innovation Roadmapping (ROIR). The approach aims at the promotion of regional development. In this case, it was carried out to develop a specific innovation in the field of 'Zero-acreage farming' (ZFarming), which is a building-related subtype of urban agriculture. For the evaluation of the process, an online survey was sent to the 58 participants of the ROIR on March 4, 2014. The survey ended on April 8, 2014, and a response rate of 53.54% resulted in a sample size of 31 respondents. The survey was divided into seven different blocks. We analyzed the ROIR process׳s contribution to knowledge generation, the establishment of networks among the participants, the implementation of new projects related to ZFarming, and the increase of acceptance of ZFarming and the selected ZFarming innovation. Furthermore, other remarks, and personal information were collected. Hence, the objective of the survey was to assess whether ROIR is a useful tool to promote the aforementioned innovation drivers, and thereby, the selected innovation, which was developed throughout the process. The data were used in the research article "Application and evaluation of a participatory "open innovation" approach (ROIR): the case of introducing zero-acreage farming in Berlin" (Specht et al., 2016) [1].

  11. Innovative United Kingdom Approaches To Measuring Service Quality.

    Winkworth, Ian

    2001-01-01

    Reports on approaches to measuring the service quality of academic libraries in the United Kingdom. Discusses the role of government and the national background of quality measurement; measurement frameworks; better use of statistics; benchmarking; measuring user satisfaction; and possible future development. (Author/LRW)

  12. Model of the Russian Federation Construction Innovation System: An Integrated Participatory Systems Approach

    Emiliya Suprun

    2016-08-01

    Full Text Available This research integrates systemic and participatory techniques to model the Russian Federation construction innovation system. Understanding this complex construction innovation system and determining the best levers for enhancing it require the dynamic modelling of a number of factors, such as flows of resources and activities, policies, uncertainty and time. To build the foundations for such a dynamic model, the employed study method utilised an integrated stakeholder-based participatory approach coupled with structural analysis (MICMAC—Matrice d'Impacts Croisés Multiplication Appliquée à un Classement Cross-Impact Matrix. This method identified the key factors of the Russian Federation construction innovation system, their causal relationship (i.e., influence/dependence map and, ultimately, a causal loop diagram. The generated model reveals pathways to improving construction innovation in the Russian Federation and underpins the future development of an operationalised system dynamics model.

  13. A Systems Approach to Healthcare Innovation Using the MIT Hacking Medicine Model.

    Gubin, Tatyana A; Iyer, Hari P; Liew, Shirlene N; Sarma, Aartik; Revelos, Alex; Ribas, João; Movassaghi, Babak; Chu, Zen M; Khalid, Ayesha N; Majmudar, Maulik D; Lee, Christopher Xiang

    2017-07-26

    MIT Hacking Medicine is a student, academic, and community-led organization that uses systems-oriented "healthcare hacking" to address challenges around innovation in healthcare. The group has organized more than 80 events around the world that attract participants with diverse backgrounds. These participants are trained to address clinical needs from the perspective of multiple stakeholders and emphasize utility and implementation viability of proposed solutions. We describe the MIT Hacking Medicine model as a potential method to integrate collaboration and training in rapid innovation techniques into academic medical centers. Built upon a systems approach to healthcare innovation, the time-compressed but expertly guided nature of the events could enable more widely accessible preliminary training in systems-level innovation methodology, as well as creating a structured opportunity for interdisciplinary congregation and collaboration. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Innovative Approaches in Distance Education in the Field of Environmental Management and Environmental Technologies

    Leontev Mikhail

    2016-01-01

    Full Text Available This article discusses the innovative structures and components of distance learning and education, discusses the results of application of approaches to teaching in the electronic environment based on the proposed andragogic and pedagogical models of teaching in cyberspace, for adult learners, bachelor graduates of “Management” for the training program “Introduction to environmental management systems”. This program particularly addresses the role of environmental managers in a company activity, the implementation of ecologically clean technologies. The author proposed an innovative nonlinear andragogic model of learning. The model was mediated by the constructive approach and problem-oriented learning.

  15. Delivering beneficial impacts in Assistive Technology: Improving government's approach to innovation.

    Lane, Joseph P

    2015-01-01

    Society typically relies on the industrial sector to supply product and service innovations through the free market system. In some areas of free market failure deemed important to society - such as Assistive Technology - governments intervene by applying alternative innovation systems. This paper contends that governments consistently and inappropriately support an exploratory grant approach led by academia which generates knowledge in conceptual and prototype states, and instead should shift to a procurement contract approach led by industry which designs, tests and deploys commercial products and services.

  16. An innovative approach to the topical treatment of acne

    Sparavigna A

    2015-04-01

    Full Text Available Adele Sparavigna, Beatrice Tenconi, Ileana De Ponti, Laura La PennaDermIng srl, Clinical Research and Bioengineering Institute, Monza, MB, ItalyAbstract: Acne is characterized by primary lesions on the face, chest, and back, and by a variety of other signs and symptoms. In particular, acne inflammatory lesions result from Propionibacterium acnes colonization and are of particular relevance as they can cause permanent scarring. Acne also causes significant psychological morbidity in affected patients. Products currently available for the treatment of acne include systemic and topical treatments. As these products can cause severe side effects, new, innovative therapies are needed. Farmaka Acne Cream (FAC is a novel, film-forming cream developed to treat mild and moderate acne. In vitro studies have demonstrated that FAC is as effective as 5% benzoyl peroxide in inhibiting growth of P. acnes. In 32 subjects with mild or moderate acne, FAC reduced all the major signs and symptoms of the disease. These included itching, erythema, and scaling, as well as reductions in the numbers of papules, pustules, and open and closed comedones. Acne severity improved in 38% of subjects, while none worsened. FAC was found to be effective in controlling sebum secretion, and was non-comedogenic. Most subjects (90% reported tolerability as good or very good, while clinical efficacy and cosmetic acceptability were judged as good. For assessment of contact sensitization and photosensitization, FAC was applied daily to the backs of 29 subjects in two symmetric areas for 10 days. Using a solar stimulator, one minimal erythema dose was delivered to one side of the back from days 11 to 13. The four different subareas of treated/untreated and irradiated/nonirradiated and combinations thereof were compared. No cases of contact sensitization or photosensitization were observed, and FAC is considered safe for use in intense sunlight. In vitro and in vivo studies provide

  17. [Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

    Bohnet-Joschko, Sabine; Kientzler, Fionn

    2010-01-01

    Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

  18. Innovations

    Estee, Charles R., Ed.

    1973-01-01

    Introduces packaged learning modules in environmental and applied sciences education, general-education courses with emphases on chemistry impact on various institutions, methods of presenting homework solutions by tape cassettes, and experimental approaches to teaching of science for inservice elementary teachers in Vancouver, Canada. (CC)

  19. Managing ambiguity in business. A holistic and innovative approach

    Pop Oana

    2017-07-01

    Full Text Available This article will look at the hurdles of dealing with ambiguity and the wicked problems that organizations are struggling with, by providing key insights from a one year team coaching program that the author had the opportunity to deliver in a Romanian entrepreneurial organization. Based on the actual methods used and highlighting the findings and impact of the program, we will reflect on how ambiguity manifests in organizational settings and how wicked problems can be defined. The methods employed are within the range of complexity science and are holistic approaches to systemic interventions within organizations that combine soft systems methodology, paradoxical theory of change, complex responsive processes approach with important concepts from systems thinking such as archetypes, feedback loops and modeling. One of the key objectives of the article is to reunite different academic approaches and link them to a case study as a way of adding value to these approaches and to reiterate that research needs, to find its rightful place in the practitioners’ toolkit and have a more meaningful and direct impact on the real struggles that business is faced with. The author’s expertize in systemic interventions is based on extensive practitioner experience, having been trained and certified as a systemic coach and facilitator, and therefore draws upon the work of other skilled practitioners that support companies in finding successful ways to address complexity. Although the article can be easily put in the complexity science and systems thinking area of academic interest, the research questions and insights are intended to serve the learning and the evolution of organizations.

  20. An Innovative Approach for online Meta Search Engine Optimization

    Manral, Jai; Hossain, Mohammed Alamgir

    2015-01-01

    This paper presents an approach to identify efficient techniques used in Web Search Engine Optimization (SEO). Understanding SEO factors which can influence page ranking in search engine is significant for webmasters who wish to attract large number of users to their website. Different from previous relevant research, in this study we developed an intelligent Meta search engine which aggregates results from various search engines and ranks them based on several important SEO parameters. The r...

  1. IAEA Technical Meeting on Innovative Fast Reactor Designs with Enhanced Negative Reactivity Feedback Features. Working Material

    2012-01-01

    The objective of the TM was to review and discuss the safety characteristics and the performances of the core of innovative fast reactor concepts, as well as to present the ongoing R&D activities in the area of core design and advanced simulation tools and methods for fast reactor core physics analysis. The focus was on fast spectrum cores optimized for actinide utilization and transmutation and, in particular, on core designs with enhanced negative reactivity feedback effects

  2. Proceedings of international topical meeting on VVER technical innovations for next century

    NONE

    2000-07-01

    The proceedings contain 45 presentations, all of which have been input to INIS. They deal predominantly with innovations implemented in recent years at nuclear power plants equipped with reactors of the WWER type, aimed at upgrading the safety and/or efficiency of the plants; some are devoted to studies of safety-related properties of materials or components employed at these power plants. (A.K.)

  3. Proceedings of international topical meeting on VVER technical innovations for next century

    2000-01-01

    The proceedings contain 45 presentations, all of which have been input to INIS. They deal predominantly with innovations implemented in recent years at nuclear power plants equipped with reactors of the WWER type, aimed at upgrading the safety and/or efficiency of the plants; some are devoted to studies of safety-related properties of materials or components employed at these power plants. (A.K.)

  4. IAEA Technical Meeting on Innovative Fast Reactor Designs with Enhanced Negative Reactivity Feedback Features. Presentations

    2012-01-01

    The objective of the TM is to review and discuss the safety characteristics and the performances of the core of innovative fast reactor concepts, as well as to present the ongoing R&D activities in the area of core design and advanced simulation tools and methods for fast reactor core physics analysis. The focus is on fast spectrum cores optimized for actinide utilization and transmutation and, in particular, on core designs with enhanced negative reactivity feedback effects

  5. The Innovation of the Services by Quality Strategic Approach

    Luminiţa Gabriela POPESCU

    2007-06-01

    Full Text Available Our basic assumption is that integrating the Quality strategy in the general strategy of the organization is a complex process, in which the management has to take into account the organizational consequences. From this point of view, the strategic approach of Quality is formulated according to a macro-vision about the organization and consists in the ability of orchestrating simultaneous transformations of each system in the organization. According to our theory, which will be demonstrated inside this paper, integrating the strategy of Quality in the general strategy of the organization is materialized in a complex transformation, oriented along four dimensions.

  6. Selection and approbation of new technical approaches in innovation projects

    Matvienko, V.A.; Pastushenko, V.N.; Zvorykin, K.O.; Zvorykin, L.O.

    1999-01-01

    Large-scale technical approaches based on the application of new technologies, equipment, tools and other production equipping means (PEM) are to be previously tested by technical and engineering practice and thoroughly approved. These circumstances create objective prerequisites for organization within the infrastructure of the 'OU' of a special sector to solve such a problem. A structure-and-logic model of the infrastructure sector is represented. Principal trends of activities of the proposed new sector of the 'OU' infrastructure may become the following ones: personnel training, skill rising and attestation; adaptation of new samples of universal and auxiliary equipment; new technologies and equipment approbation; approbation of actions in nonstandard situations

  7. Some Innovative Approaches for Public Health and Epidemiology Informatics.

    Toubiana, L; Griffon, N

    2016-11-10

    Summarize excellent current research published in 2015 in the field of Public Health and Epidemiology Informatics. The complete 2015 literature concerning public health and epidemiology informatics has been searched in PubMed and Web of Science, and the returned references were reviewed by the two section editors to select 14 candidate best papers. These papers were then peer-reviewed by external reviewers to allow the editorial team an enlightened selection of the best papers. Among the 1,272 references retrieved from PubMed and Web of Science, three were finally selected as best papers. The first one presents a language agnostic approach for epidemic event detection in news articles. The second paper describes a system using big health data gathered by a statewide system to forecast emergency department visits. The last paper proposes a rather original approach that uses machine learning to solve the old issue of outbreak detection and prediction. The increasing availability of data, now directly from health systems, will probably lead to a boom in public health surveillance systems and in large-scale epidemiologic studies.

  8. Effect of Financial Innovations on Demand for Money in Pakistan: An ARDL approach

    Qais Aslam

    2010-12-01

    Full Text Available An increasing array of development of banking system of Pakistan, through the use of information technology and modernization of products and services has led to financial innovations to be considered as important determinant of demand for money. This paper investigates the relationship of financial innovations and demand for money in Pakistan using Pesaran and Shin (1995 ARDL approach for long run and ECM for short run determination using yearly observations from 1957 to 2008. Using the ARDL coefficient estimation approach financial innovations demonstrates positive relationship, not found to significant but highly elastic and does not have deterministic trend for long run estimation whereas positively significant and deterministic trend for money demand function in short run in case of Pakistan.

  9. Fuzzy interaction modelling for participants in innovation development: approaches and examples

    CHERNOV Vladimir

    2018-01-01

    Full Text Available The article considers the interaction problems of the participants in innovative development at the regional level. Mathematical approaches and formulations for mode lling, such as the interaction on the basis of game approaches and the theory of fuzzy sets, have been proposed. In particular, the interaction model of innovative participants in the region, considered as a fuzzy coalition game, is presented. Its theoretical justification and an example of practical calculations are given. Further, the methodology of interaction modelling is considered , taking into account the motives of the participants in innovative development when forming fuzzy coalitions. An example of the corresponding calculations is also given. Also, the interaction model of "state-regions" in the interpretation of the fuzzy hierarchical game is proposed and described. The features of its solution are described and an example of calculations is presented.

  10. Expert Meeting Report. Key Innovations for Adding Energy Efficiency to Maintenance Projects

    Wood, A. [NAHB Research Center, Upper Marlboro, MD (United States); Wiehagen, J. [NAHB Research Center, Upper Marlboro, MD (United States)

    2012-09-01

    This report describes an expert meeting hosted by the Building America research team NAHB Research Center, which was held on February 8, 2012, in Orlando, Florida. The topic focused on efforts to increase the efficiency of existing homes, specifically for re-roofing and the opportunities for adding energy efficiency upgrades during this major home repair activity.

  11. Proposed Model for Innovation of Community Colleges to Meet Labor Market Needs in Saudi Arabia

    Almannie, Mohamed

    2015-01-01

    The study introduced a very important issue for the development of labor market in any developing country. The rapid changes in technology and communication imposed challenges on education institutions for the development of labor market to meet local communities. These institutions have more responsibilities to provide professional and skilled…

  12. Climate change, ethics and sustainability: An innovative approach

    José Luis Sánchez García

    2018-05-01

    Full Text Available Our goal in this article is the analysis of the state of affairs, regarding the phenomenon of climate change and its impact in different areas. We synthesize the various approaches available in the scientific debate on this subject, mainly the one that affirms the existence of global warming and the current approach, which denies it. Beyond the controversy, what seems to be evident is that there is a multifactorial causality in a phenomenon that affects anthropogenic factors a well. Since some environmentalisms exclude the human being in their consideration of the ecosystem, and if they do, they accommodate man in their approaches always as a variable that distorts and deteriorates the environment, we believe that a fundamental rethinking of the issue is needed, from the perspective of an integral environmentalism. The environmentalism we propose not only does not exclude the human being from this multifactorial equation, but also considers man as the fundamental, modifiable variable in that process. We thus consider the environmental problem in the broader framework of an integral ecology, where the human being takes a central place, understood as a free person and a moral subject, responsible for his actions and a key element in any consideration and review of the process. In this context, the concept of sustainability emerges as a key concept that must guide human action in all areas, a concept from which it is possible to appeal to the responsibility of man within the framework of an ethics of sustainability. Man is called to do right in all orders. When he does not respect this ethical orientation, so implicitly included in his own conscience, he becomes denatured and suffers the consequences in himself and in the environment in which he lives. We believe that it is a priority to seek the foundations of the existence of God, analyzing the theistic view, the foundations of sustainability for the good of man himself and the planet. JEL

  13. Innovative biological approaches for monitoring and improving water quality

    Sanja eAracic

    2015-08-01

    Full Text Available Water quality is largely influenced by the abundance and diversity of indigenous microbes present within an aquatic environment. Physical, chemical and biological contaminants from anthropogenic activities can accumulate in aquatic systems causing detrimental ecological consequences. Approaches exploiting microbial processes are now being utilized for the detection, and removal or reduction of contaminants. Contaminants can be identified and quantified in situ using microbial whole-cell biosensors, negating the need for water samples to be tested off-site. Similarly, the innate biodegradative processes can be enhanced through manipulation of the composition and/or function of the indigenous microbial communities present within the contaminated environments. Biological contaminants, such as detrimental/pathogenic bacteria, can be specifically targeted and reduced in number using bacteriophages. This mini-review discusses the potential application of whole-cell microbial biosensors for the detection of contaminants, the exploitation of microbial biodegradative processes for environmental restoration and the manipulation of microbial communities using phages.

  14. Innovative biological approaches for monitoring and improving water quality

    Aracic, Sanja; Manna, Sam; Petrovski, Steve; Wiltshire, Jennifer L.; Mann, Gülay; Franks, Ashley E.

    2015-01-01

    Water quality is largely influenced by the abundance and diversity of indigenous microbes present within an aquatic environment. Physical, chemical and biological contaminants from anthropogenic activities can accumulate in aquatic systems causing detrimental ecological consequences. Approaches exploiting microbial processes are now being utilized for the detection, and removal or reduction of contaminants. Contaminants can be identified and quantified in situ using microbial whole-cell biosensors, negating the need for water samples to be tested off-site. Similarly, the innate biodegradative processes can be enhanced through manipulation of the composition and/or function of the indigenous microbial communities present within the contaminated environments. Biological contaminants, such as detrimental/pathogenic bacteria, can be specifically targeted and reduced in number using bacteriophages. This mini-review discusses the potential application of whole-cell microbial biosensors for the detection of contaminants, the exploitation of microbial biodegradative processes for environmental restoration and the manipulation of microbial communities using phages. PMID:26322034

  15. Mindful innovation

    Olsen, Poul Bitsch

    2008-01-01

    Mindful innovation is an approach to innovation that pays attention to people's experience in an organization rather than to formal organization or social role.......Mindful innovation is an approach to innovation that pays attention to people's experience in an organization rather than to formal organization or social role....

  16. Canadian Wildland Fire Strategy: A vision for an innovative and integrated approach to managing the risks

    Canadian Wildland Fire Strategy Project Management Team

    2006-01-01

    The Canadian Wildland Fire Strategy (CWFS) provides a vision for a new, innovative, and integrated approach to wildland fire management in Canada. It was developed under the auspices of the Canadian Council of Forest Ministers and seeks to balance the social, ecological, and economic aspects of wildland fire through a risk management framework that emphasizes hazard...

  17. Developing Critical Understanding in HRM Students: Using Innovative Teaching Methods to Encourage Deep Approaches to Study

    Butler, Michael J. R.; Reddy, Peter

    2010-01-01

    Purpose: This paper aims to focus on developing critical understanding in human resource management (HRM) students in Aston Business School, UK. The paper reveals that innovative teaching methods encourage deep approaches to study, an indicator of students reaching their own understanding of material and ideas. This improves student employability…

  18. Learning Biology through Innovative Curricula: A Comparison of Game- and Nongame-Based Approaches

    Sadler, Troy D.; Romine, William L.; Menon, Deepika; Ferdig, Richard E.; Annetta, Leonard

    2015-01-01

    This study explored student learning in the context of innovative biotechnology curricula and the effects of gaming as a central element of the learning experience. The quasi-experimentally designed study compared learning outcomes between two curricular approaches: One built around a computer-based game, and the other built around a narrative…

  19. The Baby TALK Model: An Innovative Approach to Identifying High-Risk Children and Families

    Villalpando, Aimee Hilado; Leow, Christine; Hornstein, John

    2012-01-01

    This research report examines the Baby TALK model, an innovative early childhood intervention approach used to identify, recruit, and serve young children who are at-risk for developmental delays, mental health needs, and/or school failure, and their families. The report begins with a description of the model. This description is followed by an…

  20. Innovations in education and approaches to assessment of regional educational systems

    Bauer, V. I.; Iljinyh, V. D.; Bazanov, A. V.; Kozin, E. S.

    2018-05-01

    The analysis of the latest innovations in the Russian education and trends in the development of educational regional systems is provided. Approaches to assessing the effectiveness of the operation of the company-university system are discussed by an example of motor engineering training for the oil and gas industry.

  1. Using Narratives to Develop Standards for Leaders: Applying an Innovative Approach in Western Australia

    Wildy, Helen; Pepper, Coral

    2005-01-01

    Dissatisfaction with long lists of duties as substitutes for standards led to the innovative application of narratives as an alternative approach to the generation and use of standards for school leaders. This paper describes research conducted over nearly a decade in collaboration with the state education authority in Western Australia,…

  2. Innovative in situ treatment approach for DOE Savannah River Site Sanitary Landfill

    Knapp, J.; Suer, A.

    1994-01-01

    Pursuant to a settlement agreement reached between the US Department of Energy (DOE) and the South Carolina Department of Health and Environmental Control (SCDHEC), the Sanitary Landfill at the Savannah River Site will be closed. This paper addresses the approach used to select the innovative in situ treatment alternative for the groundwater and the vadose zone associated with the landfill

  3. Innovative Approach to the Organization of Future Social Workers' Practical Training: Foreign Experience

    Polishchuk, Vira; Slozanska, Hanna

    2014-01-01

    Innovative approaches to practical training of future social workers in higher educational establishments have been defined. Peculiarities of foreign experience of social workers' practical training in higher educational establishments have been analyzed. Experience of organizing practice for bachelor students studying at "Social Work"…

  4. Quantum mechanics meets cognitive science: explanatory vs descriptive approaches

    Blutner, R.

    2010-01-01

    We reflect on several aspects of the general claim that a quantum-like approach to Cognitive Science is advantageous over classical approaches. The classical approaches refer to the symbolic approaches including models using a classical (Kolmogorov) probability calculus. The general claim seems to

  5. Innovation in urban agriculture: Evaluation data of a participatory approach (ROIR

    Felix Zoll

    2016-06-01

    Full Text Available The data in this article represent an evaluation of a participatory process called Regional Open Innovation Roadmapping (ROIR. The approach aims at the promotion of regional development. In this case, it was carried out to develop a specific innovation in the field of ‘Zero-acreage farming’ (ZFarming, which is a building-related subtype of urban agriculture. For the evaluation of the process, an online survey was sent to the 58 participants of the ROIR on March 4, 2014. The survey ended on April 8, 2014, and a response rate of 53.54% resulted in a sample size of 31 respondents. The survey was divided into seven different blocks. We analyzed the ROIR process׳s contribution to knowledge generation, the establishment of networks among the participants, the implementation of new projects related to ZFarming, and the increase of acceptance of ZFarming and the selected ZFarming innovation. Furthermore, other remarks, and personal information were collected. Hence, the objective of the survey was to assess whether ROIR is a useful tool to promote the aforementioned innovation drivers, and thereby, the selected innovation, which was developed throughout the process. The data were used in the research article “Application and evaluation of a participatory “open innovation” approach (ROIR: the case of introducing zero-acreage farming in Berlin” (Specht et al., 2016 [1].

  6. Lean Production as an Innovative Approach to Construction

    Spišáková, Marcela; Kozlovská, Mária

    2013-06-01

    Lean production presents a new approach to the construction management which has enabled enterprises to attain very high levels of efficiency, competitiveness and flexibility in production systems. Nowadays, a number of industrial processes are managed in accordance with these advanced management principles [1]. The principles of lean production are applied within the integrated design and delivery solutions (IDDS) and prefabricated construction. IDDS uses collaborative work processes and enhanced skills, with integrated data, information, and knowledge management to minimize structural and process inefficiencies and to enhance the value delivered during design, build, and operation, and across projects. Prefabrication presents a one of opportunities for construction methods, which allows the compliance with principles of sustainable design, provides the potential benefits such as faster construction, fewer housing defects, reduction in energy use and waste and elimination of environmental and safety risks. This paper presents the lean production within the IDDS and its potential in the modern prefabrication. There is created a field providing of benefits of lean production in construction industry.

  7. Machinima interventions: innovative approaches to immersive virtual world curriculum integration

    Andrew John Middleton

    2008-12-01

    Full Text Available The educational value of Immersive Virtual Worlds (IVWs seems to be in their social immersive qualities and as an accessible simulation technology. In contrast to these synchronous applications this paper discusses the use of educational machinima developed in IVW virtual film sets. It also introduces the concept of media intervention, proposing that digital media works best when simply developed for deployment within a blended curriculum to inform learning activity, and where the media are specifically designed to set challenges, seed ideas, or illustrate problems. Machinima, digital films created in IVWs, or digital games offer a rich mechanism for delivering such interventions. Scenes are storyboarded, constructed, shot and edited using techniques similar to professional film production, drawing upon a cast of virtual world avatars controlled through a human–computer interface, rather than showing real-life actors. The approach enables academics or students to make films using screen capture software and desktop editing tools. In student-generated production models the learning value may be found in the production process itself. This paper discusses six case studies and several themes from research on ideas for educational machinima including: access to production; creativity in teaching and learning; media intervention methodology; production models; reusability; visualisation and simulation.

  8. Trends in Singing Voice Research: An Innovative Approach.

    Pestana, Pedro Melo; Vaz-Freitas, Susana; Manso, Maria Conceição

    2018-01-11

    The objectives of this study were to trace and describe research patterns in singing voice, to compare the amount of published research over time, to identify journals that published most papers on "singing voice," and to establish the most frequent research topics. The study uses qualitative and quantitative approaches through descriptive statistics, text mining, and clustering. The authors conducted a search to identify scientific papers. The titles and abstracts were analyzed regarding word frequency and relations between them, through hierarchical cluster analysis and co-occurrence networks. The frequency of journals was calculated, as well as the amount of papers across time. Since 1949, 754 papers were published and an increase was noticed. Even though 162 journals were identified by the authors, the Journal of Voice holds the majority of papers, in every analyzed period. An evolution of studied topics is described. Up to 2010, the main theme was professional singers, especially classical and opera interpreters. Since then, voice quality and the effects of training gathered more attention. The growing interest in singing has been conspicuous since the first indexed paper. However, it has been slightly slowing down. Until 2010, great importance was given to the voice quality of singers and their occupational demands. Acoustic analysis was widely used to study the effects of training. Since 2010, the concern with functionality is increasing, rather than the organic voice structures. Musical perception studies have been a trend, as well as the use of electroglottography. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  9. Innovative approaches to remediation for VOC sites using recirculating wells

    Dawson, G.W.

    1996-01-01

    In-well air stripping with approaches such as the patented NoVOCs system offer both cost and operational advantages over pump and treat, and in situ air sparging technologies. With in-well stripping, the water is treated in the well and discharged without being brought to the surface. Discharged water is circulated through the saturated zone acting as a carrier to continually flush contaminants from the aquifer matrix and transport them to the well for treatment. With pumping rates up to four times those of comparable extraction wells, large radii of influence can be maintained and remediation is achieved faster and more efficiently. In-well stripping is applicable to any strippable contaminant including chlorinated solvents (i.e., TCE and PCE) and hydrocarbons such as the aromatic components in petroleum fuels. Growing costs associated with water discharge, NPDES permits, water rights and, in some areas, salt water intrusion have provided economic incentives to retrofit existing pump and treat systems with NoVOCs units. A large number of wells are amenable to retrofitting depending on their diameter, location and length of screens, and back fill. Even with the new initiatives for intrinsic remediation for petroleum fuel releases, there is a role for the NoVOCs technology. Free product removal wells based on the NoVOCs design eliminate the need to treat and permit water discharges produced when generating a cone of depression for collecting the floating fuel. Additionally, the stripping action and introduction of dissolved oxygen reduce soluble hydrocarbon concentrations to risk levels that can be easily addressed through intrinsic bioremediation

  10. Innovative approach to training radiation safety regulatory professionals

    Gilley, Debbie Bray

    2008-01-01

    Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)

  11. Tradition meets innovation: transforming academic medical culture at the University of Pennsylvania's Perelman School of Medicine.

    Pati, Susmita; Reum, Josef; Conant, Emily; Tuton, Lucy Wolf; Scott, Patricia; Abbuhl, Stephanie; Grisso, Jeane Ann

    2013-04-01

    Traditional performance expectations and career advancement paths for academic physicians persist despite dramatic transformations in the academic workflow, workload, and workforce over the past 20 years. Although the academic physician's triple role as clinician, researcher, and educator has been lauded as the ideal by academic health centers, current standards of excellence for promotion and tenure are based on outdated models. These models fail to reward collaboration and center around rigid career advancement plans that do little to accommodate the changing needs of individuals and organizations. The authors describe an innovative, comprehensive, multipronged initiative at the Perelman School of Medicine at the University of Pennsylvania to initiate change in the culture of academic medicine and improve academic productivity, job satisfaction, and overall quality of life for junior faculty. As a key part of this intervention, task forces from each of the 13 participating departments/divisions met five times between September 2010 and January 2011 to produce recommendations for institutional change. The authors discuss how this initiative, using principles adopted from business transformation, generated themes and techniques that can potentially guide workforce environment innovation in academic health centers across the United States. Recommendations include embracing a promotion/tenure/evaluation system that supports and rewards tailored individual academic career plans; ensuring leadership, decision-making roles, and recognition for junior faculty; deepening administrative and team supports for junior faculty; and solidifying and rewarding mentorship for junior faculty. By doing so, academic health centers can ensure the retention and commitment of faculty throughout all stages of their careers.

  12. USING OF THE PROJECT-ORIENTED APPROACH IN THE INNOVATIVE ACTIVITY MANAGEMENT

    Варвара Михайлівна ПІТЕРСЬКА

    2016-02-01

    Full Text Available The article describes the current state of science in Ukraine, indicated the main directions of research funding. The methodological approach of working out of the project-oriented strategy of innovative development of scientific activity, including the implementation of international trends and support of research is proposed. Using of a project-oriented approach of research activities due to the need of reducing of the research cycle and strengthen expenditure control capabilities due to restrictions of funding research projects from the state. It should be noted that the structuring of research, given the project approach, allows engaging of the implementation of the research project professionals with good knowledge and skills and create a team activity focused on quality results. Innovations aren‘t still properly means the improvement of competitiveness in Ukraine. Thus, the problem of transition to an innovative development model retains its relevance, that significantly enhanced in the light of current external and internal trends. Using of the project-oriented innovation management due to the need to shorten the cycle of research and to strengthen the control over the expenditure of funds in connection with the limited funding of scientific research by the state.

  13. When 'national innovation system' meet 'varieties of capitalism' arguments on labour qualifications: On the skill types and scientific knowledge needed for radical and incremental product innovations

    Herrmann, A.M.; Peine, A.

    2011-01-01

    The literatures on 'varieties of capitalism' (VoC) and 'national innovation systems' (NIS) propose very similar arguments about how firms require different types of labour qualifications to pursue strategies of radical product innovation (RPI), incremental product innovation (IPI), and product

  14. Analysing innovation policy indicators through a functional approach: the aeronautic industry case

    Haddad, C.R.; Uriona Maldonado, M.

    2016-07-01

    Developing countries face different problems than developed countries and the use of the same indicator to evaluate and compare both regions can lead to misleading conclusions. Traditional indicators, such as R&D and patents may not capture the whole dynamic of a system, as they are used to compare systems focusing on its current structure. Many authors have been discussing the processes underlying industry transformation, innovation, and economic growth to access a system performance, i.e. the functions of innovation systems. Therefore, the purpose of this paper is to analyze these functions as indicators to measure the performance of the system in order to identify policy issues. In order to do that, we analyze the case of the aeronautic sectoral system of innovation of a region in Brazil. The functional approach helped us to better capture the dynamic of the system, by not restricting our analysis to the system’s structure. (Author)

  15. Examining the articulation of innovativeness in co-creative firms: a neural network approach

    di Tollo, Giacomo; Tanev, Stoyan

    2010-01-01

    Value co-creation is an emerging marketing and innovation paradigm describing a broader opening of the firm to its customers by providing them with the opportunity to become active participants in the design and development of personalized products, services and experiences. The aim of the present....... The preliminary simulation results indicate the existence of such relationship. The ANN approach does not suggest a specific model but the relationship that was found out between the forecasted values of the perception of innovation and its actual values clearly points in this direction....... contribution is to provide preliminary results from a research project focusing on the relationship between value co-creation and the perception of innovation in technology-driven firms. The data was collected in a previous study using web search techniques and factor analysis to identify the key co...

  16. Meeting United States re-licensing requirements related to environmental protection using innovative technologies

    Taft, E.P.; Winchell, F.C.; Cook, T.C.

    1998-01-01

    Procedure for meeting re-licensing requirements related to environmental protection and an overview of several new and emerging technologies regarding the development of ways to prevent fish passage through hydraulic turbines at hydroelectric power dams is described. Fish mortality and injury has long been a concern in the hydroelectric industry and research and development efforts have been ongoing since the 1970s to prevent fish passage through turbines. Several new and emerging technologies are examined that have the potential for wide-spread cost-effective applications

  17. Innovative technology to meet the demands of the white biotechnology revolution of chemical production

    Villadsen, John

    2007-01-01

    by which a technological revolution termed "white biotechnology" for production of commodity chemicals has proved its credibility. Obviously, the rapid advances in biology has been crucial for the development of industrial biotechnology towards a position where even its cheap products such as bio-fuels can...... of sophisticated models, supported by accurate data obtained in experimental equipment that did not exist a few years ago. The need to update the chemical engineering education to meet the needs of the bio-industry is also evident. Much of the progress of the bio-industry has up to now been based on fundamental...

  18. Below the radar innovations and emerging property right approaches in Tibetan medicine.

    Madhavan, Harilal

    2017-11-01

    Outside the established legal framework of intellectual property rights, countries have pursued multiple pathways to protect and promote traditional medicine. As Tibetan medicine is a late entrant into commercialization, the proposals to propertize generally fall within the rationale of existing sui-generis paradigms of Intellectual property. In this context, the article enquires the state of innovations in this sector viz-a-viz the property right approaches in place especially in India and China. It argues that beyond the usual complex medical science and technology led-innovations, the pathways of cumulative processes and creative additions through informal experiential learning platforms, where the transfers of knowledge become part of livelihood and social benefits (we call them "below the radar innovations") is ubiquitous in Tibetan medicine. The trends and politics in two recent strategies of protection, that is, Tibetan medicine as economic property (emphasizing patents here among many others) and as a cultural property (intangible cultural heritage) are juxtaposed with these informal innovative attempts. The paper underlines that the productivity-based economic rationale of these protection mechanisms should not obscure sustainability alternatives of "below the radar" (BtR) innovations in Tibetan medicine.

  19. How should grid operators govern smart grid innovation projects? An embedded case study approach

    Reuver, Mark de; Lei, Telli van der; Lukszo, Zofia

    2016-01-01

    Grid operators increasingly have to collaborate with other actors in order to realize smart grid innovations. For routine maintenance, grid operators typically acquire technologies in one-off transactions, but the innovative nature of smart grid projects may require more collaborate relationships. This paper studies how a transactional versus relational approach to governing smart grid innovation projects affects incentives for other actors to collaborate. We analyse 34 cases of smart grid innovation projects based on extensive archival data as well as interviews. We find that projects relying on relational governance are more likely to provide incentives for collaboration. Especially non-financial incentives such as reputational benefits and shared intellectual property rights are more likely to be found in projects relying on relational governance. Policy makers that wish to stimulate smart grid innovation projects should consider stimulating long-term relationships between grid operators and third parties, because such relationships are more likely to produce incentives for collaboration. - Highlights: • Smart grids require collaboration between grid operators and other actors. • We contrast transactional and relational governance of smart grid projects. • Long-term relations produce more incentives for smart grid collaboration. • Non-financial incentives are more important in long-term relations. • Policy makers should stimulate long-term relations to stimulate smart grids.

  20. Examining the articulation of innovativeness in co-creative firms: a neural network approach

    di Tollo, Giacomo; Tanev, Stoyan

    2011-03-01

    Value co-creation is an emerging marketing and innovation paradigm describing a broader opening of the firm to its customers by providing them with the opportunity to become active participants in the design and development of personalized products, services and experiences. The aim of the present contribution is to provide preliminary results from a research project focusing on the relationship between value co-creation and the perception of innovation in technology-driven firms. The data was collected in a previous study using web search techniques and factor analysis to identify the key co-creation components and the frequency of firms' online comments about their new products, processes and services. The present work focuses on using an Artificial Neural Network (ANN) approach to understand if the extent of value co-creation activities can be thought of as an indicator of the perception of innovation. The preliminary simulation results indicate the existence of such relationship. The ANN approach does not suggest a specific model but the relationship that was found out between the forecasted values of the perception of innovation and its actual values clearly points in this direction.

  1. A MULTI-OBJECTIVE APPROACH TO THE EVALUATION OF INNOVATIVE POTENTIAL OF THE TOURISM INDUSTRY ORGANIZATIONS

    Tat’yana Pavlovna Levchenko

    2018-02-01

    Full Text Available Speaking about innovation in the tourism industry and hotel business, in particular, it usually means events of a systemic nature, with quality novelty, aimed at achieving positive changes, stable functioning and dynamic development. Along with general economic factors that determine the uneven demand for services of hospitality, it is explained by the sharp increase in dependence of their tourism and recreational opportunities from innovative potential (IP, capability of adapting to challenging competitive environment. The article considers a multi-objective approach to the study of the innovative potential of the tourism industry organizations. Its essence lies in the fact that the choice of the structural elements from the point of view of their value and importance (in any combination cannot be established a priori, without sufficient objective analysis on some of the more important criteria for achieving the goals. A diagnostic analysis and evaluation of the innovation potential of several hotel organizations from the standpoint of a multi-purpose approach is performed.

  2. Innovative on-site approach to oil based drilling mud waste management

    Laurell, A.

    1999-01-01

    An innovative system has been developed by Unique Oilfield Technology Services (UNOTEC) for the environmentally safe containment and decomposition of oily drilling residuals. The approach is a complete management system which provides an on-site alternative to off-site disposal. The approach uses the principles of total containment and microbial decomposition of hydrocarbons. The complete management system transforms the waste into an end product suitable for on-site land treatment, in accordance with regulatory guidelines. This paper describes how the approach can eliminate the future environmental risk and economic liability associated with hydrocarbon contaminated materials

  3. Social marketing meets health literacy: Innovative improvement of health care providers’ comfort with patient interaction

    Primack, Brian A.; Bui, Thuy; Fertman, Carl I.

    2010-01-01

    Objective It is essential to train health care providers to deliver care sensitive to the needs of diverse individuals with varying degrees of health literacy. We aimed to evaluate an innovative, theory-based, educational intervention involving social marketing and health literacy. Methods In 2006 at a large medical school, all first-year students were exposed to the intervention. They completed pre- and post-test anonymous surveys including demographic data, covariates, and key outcome variables. Paired t-tests and multiple linear regression were used to evaluate the intervention and to determine independent associations among the key outcome variables. Results Post-intervention scores were significantly higher than pre-intervention scores for social marketing (3.31 versus 1.90, p marketing and health literacy can improve skills that improve medical students’ comfort with patients of diverse backgrounds. Practice implications Health care providers can be taught educational principles and skills involved in developing effective patient education materials. These skills may improve providers’ comfort with direct patient interaction. PMID:17418522

  4. Small power and heat generation systems on the basis of propulsion and innovative reactor technologies. Proceedings of an advisory group meeting

    2000-09-01

    In the future for developing regions and remote areas one or two power reactors in the 50 MWe to 100 MWe range could be appropriately applied for electricity and heat generation. Introducing and managing such a small program with conventional reactor systems would require a mature supporting technological infrastructure and many skilled highly-trained staff at the site, which might be a problem in some countries. An increased number of small conventional reactors would increase the burden and expenditure for assuring security and non-proliferation. To this end, the time has come to develop an innovative small reactor concept which meets the following requirements: reliable, safe operation with a minimum maintenance and supporting infrastructure, economic competitiveness with alternative energy sources available to the candidate sites, and significant improvements in proliferation resistance relative to existing reactor systems. Successful resolution of such a problem requires a comprehensive system approach that considers all aspects of manufacturing, transportation, operation and ultimate disposal. Some elements of this approach have been used previously in the development of propulsion nuclear power systems, with consideration given to many diverse requirements such as highly autonomous operation for a long period of time, no planned maintenance, no on-site refueling and ultimate disposition. It is with this focus that the IAEA convened the Advisory Group on Propulsion Reactor technologies for Civilian Applications

  5. Small power and heat generation systems on the basis of propulsion and innovative reactor technologies. Proceedings of an advisory group meeting

    NONE

    2000-09-01

    In the future for developing regions and remote areas one or two power reactors in the 50 MWe to 100 MWe range could be appropriately applied for electricity and heat generation. Introducing and managing such a small program with conventional reactor systems would require a mature supporting technological infrastructure and many skilled highly-trained staff at the site, which might be a problem in some countries. An increased number of small conventional reactors would increase the burden and expenditure for assuring security and non-proliferation. To this end, the time has come to develop an innovative small reactor concept which meets the following requirements: reliable, safe operation with a minimum maintenance and supporting infrastructure, economic competitiveness with alternative energy sources available to the candidate sites, and significant improvements in proliferation resistance relative to existing reactor systems. Successful resolution of such a problem requires a comprehensive system approach that considers all aspects of manufacturing, transportation, operation and ultimate disposal. Some elements of this approach have been used previously in the development of propulsion nuclear power systems, with consideration given to many diverse requirements such as highly autonomous operation for a long period of time, no planned maintenance, no on-site refueling and ultimate disposition. It is with this focus that the IAEA convened the Advisory Group on Propulsion Reactor technologies for Civilian Applications.

  6. An innovative educational approach to professional development of medical laboratory scientists in Botswana

    Magowe MK

    2014-04-01

    Full Text Available Mabel KM Magowe,1 Jenny H Ledikwe,2,3 Ishmael Kasvosve,1 Robert Martin,2 Kabo Thankane,3 Bazghina-werq Semo2,31Faculty of Health Sciences, University of Botswana, Gaborone, Botswana; 2Department of Global Health, University of Washington, Seattle, Washington, USA; 3Botswana International Training and Education Center for Health, Gaborone, BotswanaPurpose: To address the shortage of laboratory scientists in Botswana, an innovative, one-year academic bridging program was initiated at the University of Botswana, to advance diploma-holding laboratory technicians towards becoming laboratory scientists holding Bachelor’s degrees. An evaluation was conducted, which described the outcomes of the program and the lessons learned from this novel approach to meeting human resource needs.Methods: This was a cross-sectional, mixed-methods evaluation. Qualitative interviews were conducted with graduates of the Bachelor of Science (BSc Medical Laboratory Sciences (MLS bridging program, along with the graduates’ current supervisors, and key informants who were involved in program development or implementation. The quantitative data collected included a written questionnaire, completed by program graduates, with a retrospective pre-test/post-test survey of graduates’ confidence, in terms of key laboratory competencies.Results: The BSc MLS bridging program produced thirty-three laboratory scientists over 3 years. There was a significant increase in confidence among graduates, for specified competencies, after the program (P<0.05. Graduates reported acquiring new skills and, often, accepting new responsibilities at their former workplace, particularly in relationship to leadership and management. Five graduates enrolled in advanced degree programs. Most graduates assumed increased responsibility. However, only two graduates were promoted after completing the training program. The lessons learned include: the importance of stakeholder involvement, the need for

  7. Development of innovative problem based learning model with PMRI-scientific approach using ICT to increase mathematics literacy and independence-character of junior high school students

    Wardono; Waluya, B.; Kartono; Mulyono; Mariani, S.

    2018-03-01

    This research is very urgent in relation to the national issue of human development and the nation's competitiveness because of the ability of Indonesian Junior High School students' mathematics literacy results of the Programme for International Student Assessment (PISA) by OECD field of Mathematics is still very low compared to other countries. Curriculum 2013 launched one of them reflect the results of PISA which is still far from the expectations of the Indonesian nation and to produce a better quality of education, PISA ratings that reflect the nation's better competitiveness need to be developed innovative, interactive learning models such as innovative interactive learning Problem Based Learning (PBL) based on the approach of Indonesian Realistic Mathematics Education (PMRI) and the Scientific approach using Information and Communication Technology (ICT).The research was designed using Research and Development (R&D), research that followed up the development and dissemination of a product/model. The result of the research shows the innovative interactive learning PBL model based on PMRI-Scientific using ICT that developed valid, practical and effective and can improve the ability of mathematics literacy and independence-character of junior high school students. While the quality of innovative interactive learning PBL model based on PMRI-Scientific using ICT meet the good category.

  8. TALENT MANAGEMENT: A NOVEL APPROACH FOR DEVELOPING INNOVATIVE SOLUTIONS TOWARDS HERITAGE COMMUNITIES DEVELOPMENT

    Mohamed Hesham Madbouly Hussein Khalil

    2017-11-01

    Full Text Available Heritage communities in Egypt have continuously developed to sustain a history of millenniums. Developments have been focused on sustaining the physical heritage such as buildings and cities, yet ignoring the intangible heritage such as stories, memories and traditions of people. The results are deterioration of the developed physical heritage as a natural response of ignorance. Architectural Design Firms (ADFs are responsible for developing innovative solutions that translate intangible heritage into sustainable projects. Such solutions require talented architects who are in need of being treated in a talented manner. Therefore, this paper aims to investigate the role of Talent Management (TM as a novel approach for developing innovative solutions for Egyptian heritage communities’ development. In order to achieve this aim, a qualitative approach based on (1 literature review is used to investigate heritage development, creative industries, ADFs, motivation and TM and (2 a case study is collected and analysed to study the relationship between TM and intangible heritage preservation.

  9. Innovative approaches to cell biomechanics from cell migration to on-chip manipulation

    Okeyo, Kennedy Omondi; Adachi, Taiji

    2015-01-01

    This book covers topics on mechanosensing, mechanotransduction, and actin cytoskeletal dynamics in cell motility. It will contribute to a better understanding of how cells functionally adapt to their mechanical environment as well as highlighting fundamental concepts for designing material niches for cell manipulation. With topics from multidisciplinary fields of the life sciences, medicine, and engineering, the book is the first of its kind, providing comprehensive, integrated coverage of innovative approaches to cell biomechanics. It provides a valuable resource for seniors and graduate students studying cell biomechanics, and is also suitable for researchers interested in the application of methods and strategies in connection with the innovative approaches discussed. Each section of the book has been supplemented with concrete examples and illustrations to facilitate understanding even for readers unfamiliar with cell biomechanics.

  10. Innovative Development of Kazakhstan on The Basis of Triple Helix and Cluster Approach

    Farkhat Musayevich Dnishev

    2015-06-01

    Full Text Available The aim of the research is to study the Triple Helix model feasibility in developing innovations and using cluster approach in Kazakhstan. There are possible points of the emergence of clusters in Kazakhstan. However, there are a lot of constraining factors. First of all, institutional and social factors: the culture of business, unfair competition, low trust of economic agents to each other and to power institutes, low psychological readiness for cooperation of the enterprises of various branches and regions, poor development of chambers of commerce, and industrial associations. For the time being, the majority of regions of Kazakhstan are characterized by a limited set of high technology industrial branches, and a sharp shortage of universities generating innovation and research institutes. The research results show that the open innovation model is realized in a limited scale that does not allow to export innovations into external markets, to participate in global technology chains and international research networks. At the same time, some interaction schemes and preconditions for the development of the Triple Helix model are emerging. However, in general, the innovation policy is not systemic; it does not unite actions in the sphere of science and technology, education, industry, and regional initiatives. As the result of the research, some policy implications are given. For the development of clusters in Kazakhstan, it is desirable to use such a way, as integration into global cluster networks. It is necessary to make use of foreign experience at which various specialized state agencies become participants of clusters. It is necessary to focus not only on science but also industry, which should play the central role in the innovation process.

  11. Balanced Innovation Management

    King, David R

    2007-01-01

    The Department of Defense has demonstrated success in managing innovation. The military's approach to innovation management extends beyond traditional distinctions between internal and external innovation modes...

  12. Report of the Inaugural Meeting of the TFOS i(2) = initiating innovation Series: Targeting the Unmet Need for Dry Eye Treatment.

    Chao, Wendy; Belmonte, Carlos; Benitez Del Castillo, José M; Bron, Anthony J; Dua, Harminder S; Nichols, Kelly K; Novack, Gary D; Schrader, Stefan; Willcox, Mark D; Wolffsohn, James S; Sullivan, David A

    2016-04-01

    On March 21, 2015, a meeting was held in London, United Kingdom, to address the progress in targeting the unmet need for dry eye disease (DED) treatment. The meeting, which launched the i(2) = initiating innovation series, was sponsored by the Tear Film & Ocular Surface Society (TFOS; www.TearFilm.org) and supported by Dompé. The TFOS i(2) meeting was designed to review advances in the understanding of DED since publication of the 2007 TFOS International Dry Eye WorkShop (DEWS) report, and to help launch the highly anticipated sequel, DEWS II. The meeting was structured to discuss the scope of the DED problem, to review the clinical challenges of DED, and to consider the treatment challenges of DED. This article provides a synopsis of the presentations of this TFOS i(2) meeting. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. A benefit segmentation approach for innovation-oriented university-business collaboration

    Kesting, Tobias; Gerstlberger, Wolfgang; Baaken, Thomas

    2018-01-01

    to deal with this situation by academic engagement, hereby providing external research support for businesses. Relying on the market segmentation approach, promoting beneficial exchange relations between academia and businesses enables the integration of both perspectives and may contribute to solving......Increasing competition in the light of globalisation imposes challenges on both academia and businesses. Universities have to compete for additional financial means, while companies, particular in high technology business environments, are facing a stronger pressure to innovate. Universities seek...

  14. Managing Actors, Resources, and Activities in Innovation Ecosystems – A Design Science Approach

    Valkokari , Katri; Amitrano , Cristina ,; Bifulco , Francesco; Valjakka , Tiina

    2016-01-01

    Part 13: Design Science and Business Models - Design Science Research; International audience; Through a design science approach, the paper explores how actors in a network create and sustain competitive advantage independently and through participation in a system of actors (i.e., a collaborative network) who are not hierarchically managed but, rather, act toward their own goals within the innovation ecosystem. In accordance with design studies, the relevance of research and its quality are ...

  15. Theoretical approach to the institutionalization of forms of governance resource provision of innovative activity

    M. S. Asmolova

    2016-01-01

    Full Text Available Knowledge economy research due to the actualization of the role of knowledge and information. Management, its impact and the institutionalization of management resource provision designed to overcome the problems inherent in the present stage of development. An important research direction is to carry out theoretical analysis of economic resources in the context of their occurrence, development and improvement. This assertion has identified the need to consider the theoretical approach to the institutionalization of forms of resource management software innovation and analysis and typology of approaches by different parameters on the basis of analysis of a large number of sources. The features of the concept of institutionalization as defined phenomenon in a time perspective. In an analysis conducted by scientists used studies from different periods in the development of economic science. The analysis of numerous professional and scientific research led to the conclusion that knowledge and information should be dis-regarded as a new type of economic production factors. Separately, analyzed the impact of globalization processes that have affected the scientific and innovative sphere. Allocated to a separate study by side issues of innovative development of the Russian economy, which prevents the unresolved improve the competitiveness of the national economic and inhibits the formation of regional and national innovation system, restraining the transition to an innovative model of development. Citing as evidence of the deepening of economic globalization, the role of new information technologies and the formation of a single information space. Noting the fact that if the earlier science developed to deepen knowledge on the basis of the social division of Sciences, in the coming century should happen deepening of knowledge on the basis of their socialization.

  16. Innovation as a Tool to Make the First Years Count: I-Lab--An Innovation Approach to Unattended Social Needs

    Goettsch, Marieke; Mateo Diaz, Mercedes; Canete, Nicolas

    2018-01-01

    One of the main objectives of the Inter-American Development Bank (IDB) is to improve the lives of people in the Latin America and Caribbean (LAC) region by reducing inequality. In 2008, the IDB's Division of Competitiveness, Technology and Innovation (CTI) developed the Innovation Lab (I-Lab), which falls under the umbrella of a growing set of…

  17. Integrated systems approach to meet the insider threat

    Barnes, L.D.

    1985-01-01

    This paper describes an approach to mitigating the insider threat by integrating and supplementing existing data systems and procedures without placing an undue burden on plant management and operating personnel. Nuclear facilities have plans to deal with any forseeable chain of events, and long-term records of activities are maintained to verify that the requirements are met. The integrated systems approach proposed in this paper does not change established facility practices; rather, the approach attempts to utilize the information generated by the system. This will provide real-time interaction between the documented work permits, the operating procedure system, and the security system so that controlled access authorizations are based on a need to enter and access is limited to specific times and places

  18. Innovative new technologies to identify and treat traumatic brain injuries: crossover technologies and approaches between military and civilian applications.

    Doarn, Charles R; McVeigh, Francis; Poropatich, Ronald

    2010-04-01

    Traumatic brain injury (TBI) has become the signature injury of Operation Iraqi Freedom and Operation Enduring Freedom. The use of improvised explosive devices has seen an exponential increase in both Iraq and Afghanistan. In previous conflicts prior to Iraq, survivability of such an injury was far less. Today, technological improvements in trauma care have increased an injured warfighter's chance of survival. A reduction in severe TBI has been achieved but an increase in mild or moderate TBI has been observed. The consequences of this kind of injury can be both physical and mental and can often be hidden or even misdiagnosed. The U.S. Army is interested in pursuing technological solutions for early detection and treatment of TBI to reduce its lasting impact on the warfighter. Such technological breakthroughs have benefit beyond the military, as TBI is a high probable event in nonmilitary settings as well. To gauge what technologies or methods are currently available, the U.S. Army's Telemedicine and Advanced Technology Research Center partnered with the American Telemedicine Association to organize and conduct a discipline-specific symposium entitled "Innovative New Technologies to Identify and Treat Traumatic Brain Injuries: Crossover Technologies and Approaches Between Military and Civilian Applications." This symposium was held in Palm Springs, CA, in September 2009. The purpose of the meeting was to provide a unique opportunity for leaders from disparate organizations involved in telemedicine and related other activities to meet and explore opportunities to collaborate in new partnership models. The meeting was designed to help Telemedicine and Advanced Technology Research Center identify opportunities to expand strategic operations and form new alliances. This report summarizes this symposium while raising awareness for collaboration into better ways of adapting and adopting technologies to address this growing health issue.

  19. Meeting

    July 1989 No.19 Newsletter of the Indian Academy of Sciences. 55th Annual. Meeting ... in the world, keeping alive atthe same time his research interests, abreast .... theory made a comeback with many new ideas and with the success of the ...

  20. Integral approach to innovative fuel and material investigations in the Halden reactor

    Volkov, B.

    2009-01-01

    Integral approach used for fuel and material investigations in the Halden reactor can be used in support of qualification and certification of fuel to be introduced in commercial NPPs. This approach has been partly used for WWER fuel investigation in the Halden Reactor in a series of irradiation tests. In-pile fuel performance tests with reliable measurements provided by Halden instrumentation under different conditions can be used for validation of the WWER fuel behaviour models and verification of fuel performance codes. These models and codes can be used for qualification of innovative fuel behaviour under extended conditions

  1. Innovation and PBL Implementation in Higher Education-Approaches for Educational Change to PBL

    Li, Huichun; Stojcevski, Alex; Du, Xiangyun

    2010-01-01

    organizational profile. In this paper, we review three international universities from different context which are in the process of transforming their traditional education model to PBL one. We discuss their approaches of changing to PBL from three aspects: strategies, levels, as well as time.......As an innovative and promising education approach, PBL(problem and project based learning) has been adopted by various higher education institutions which are attempting to promote teaching and learning outcome, cultivate self learning and problem solving competences, as well as enhance...

  2. Collective Innovation : A new approach for dealing with society induced challenges: A case study in the Dutch Bakery Sector

    De Graaf, R.; Van der Duin, P.M.

    2013-01-01

    Since many of today's problems are becoming ever more complex, the way we look for and manage innovations to solve these problems should also be innovated. We introduce the ‘Collective Innovation’ approach to deal with these kind of ‘wicked problems’ that require the input of many different parties.

  3. Philosophy for Children Meets the Art of Living: A Holistic Approach to an Education for Life

    D'Olimpio, Laura; Teschers, Christoph

    2016-01-01

    This article explores the meeting of two approaches towards philosophy and education: the philosophy for children (P4C) approach advocated by Lipman and others, and Schmid's (2000a) philosophical concept of" Lebenskunst" (the art of living). Schmid explores the concept of the beautiful or good life by asking what is necessary for each…

  4. 78 FR 18932 - Public Meeting: Unmanned Aircraft Systems Test Site Program; Privacy Approach

    2013-03-28

    ... discussion about which privacy issues are raised by UAS operations and how law, public policy, and the...-0061] Public Meeting: Unmanned Aircraft Systems Test Site Program; Privacy Approach AGENCY: Federal... a public engagement session on Wednesday, April 3, 2013, on the proposed privacy policy approach for...

  5. A Systems Biology Approach to Infectious Disease Research: Innovating the Pathogen-Host Research Paradigm

    Aderem, Alan; Adkins, Joshua N.; Ansong, Charles; Galagan, James; Kaiser, Shari; Korth, Marcus J.; Law, G. L.; McDermott, Jason E.; Proll, Sean; Rosenberger, Carrie; Schoolnik, Gary; Katze, Michael G.

    2011-02-01

    The 20th century was marked by extraordinary advances in our understanding of microbes and infectious disease, but pandemics remain, food and water borne illnesses are frequent, multi-drug resistant microbes are on the rise, and the needed drugs and vaccines have not been developed. The scientific approaches of the past—including the intense focus on individual genes and proteins typical of molecular biology—have not been sufficient to address these challenges. The first decade of the 21st century has seen remarkable innovations in technology and computational methods. These new tools provide nearly comprehensive views of complex biological systems and can provide a correspondingly deeper understanding of pathogen-host interactions. To take full advantage of these innovations, the National Institute of Allergy and Infectious Diseases recently initiated the Systems Biology Program for Infectious Disease Research. As participants of the Systems Biology Program we think that the time is at hand to redefine the pathogen-host research paradigm.

  6. Collective Inclusioning: A Grounded Theory of a Bottom-Up Approach to Innovation and Leading

    Michal Lysek

    2016-06-01

    Full Text Available This paper is a grounded theory study of how leaders (e.g., entrepreneurs, managers, etc. engage people in challenging undertakings (e.g., innovation that require everyone’s commitment to such a degree that they would have to go beyond what could be reasonably expected in order to succeed. Company leaders sometimes wonder why their employees no longer show the same responsibility towards their work, and why they are more concerned with internal politics than solving customer problems. It is because company leaders no longer apply collective inclusioning to the same extent as they did in the past. Collective inclusioning can be applied in four ways by convincing, afinitizing, goal congruencing, and engaging. It can lead to fostering strong units of people for taking on challenging undertakings. Collective inclusioning is a complementing theory to other strategic management and leading theories. It offers a new perspective on how to implement a bottom-up approach to innovation.

  7. Facilitating major additions to gas pipeline capacity: innovative approaches to financing, contracting, and regulation

    Schlesinger, B.; George, R.

    1997-01-01

    The North American gas pipeline industry is in the process of changing from a highly regulated merchant business to a less-regulated, more competitive, transportation industry. This has changed the risk profiles of many companies. This study examined various innovative approaches to successfully financing major pipeline projects emphasizing pipeline capacity financing, contractual terms between shippers and pipelines, and regulatory developments. Besides suggesting options to enhance prospects for financing major pipeline expansion projects, the study also aimed at creating a better understanding of the regulatory market and commercial changes in the pipeline industry and their financing implications. The study also includes a review of the evolution in gas markets and a record of consultations with lenders, producers, marketers and users. Innovative financing, contracting and regulatory solutions are identified and assessed. 25 refs., 17 tabs., 16 figs

  8. The Innovative Approaches to Packaging – Comparison Analysis of Intelligent and Active Packaging Perceptions in Slovakia

    Loucanova Erika

    2017-06-01

    Full Text Available Packaging has always served a practical function - to hold goods together and protect it when moving toward the customer through distribution channel. Today packaging is also a container for promoting the product and making it easier and safer to use. The sheer importance of packaging functions is still growing and consequently the interest of the company is to access to the packaging more innovative and creative. The paper deals with the innovative approaches to packaging resulting in the creation of packaging with interactive active features in the form of active and intelligent packaging. Using comparative analysis, we monitored the perception of the active packaging functions in comparison to intelligent packaging function among different age categories. We identified the age categories which are most interested in these functions.

  9. Facilitating innovation : an action-oriented approach and participatory methodology to improve innovative social practice in agriculture

    Engel, P.G.H.

    1995-01-01

    This study focuses upon the social organization of innovation. It makes use of insights from knowledge and information systems research, development sociology, management science and applied philosophy and seeks answers to the following questions: What do social actors, individuals and/or organizations, actually do to innovate their practices? How do they organize themselves? Can this be managed or facilitated, and if so, how? The research is exploratory rather than concl...

  10. Innovations in occupational health nursing education, including a distance learning approach.

    Lowis, A; Ellington, H

    1991-07-01

    The results of a survey in the United Kingdom in the late 1980s indicated that many occupational health nurses were not being sent for formal training because of the length of time nurses needed to be away from their employment and the difficulty employers had in finding nurse replacements during training. To meet the needs of occupational health nurses and their employers, the Robert Gordon Institute of Technology (RGIT) instituted a modular training course that offers full time attendance or distance learning options. RGIT's course consists of six modules over a 1 to 3 year period, which students can take in any order after completing a short Return to Study course. Using the innovative distance learning option, occupational health nurses can earn a Diploma in Occupational Health Nursing while completing most of their courses at the workplace, thus avoiding conflicts between training and work schedules.

  11. Design approaches for heating reactors. Report of an advisory group meeting

    1997-09-01

    The largest fraction of all energy consumed by society is in the form of heat at a temperature below 150 deg. C, and the use of nuclear energy to provide this sort of energy has been examined for the past several years. Accordingly the IAEA has been involved in related activities ever since the various technical approaches were first discussed in the late 1970s within the Nuclear Power Programme. A number of meetings, such as Technical Committee meetings and Advisory Group meetings have been held, and their results have usually been published in IAEA-TECDOCs, the last of in 1991. Refs, figs, tabs

  12. Design approaches for heating reactors. Report of an advisory group meeting

    NONE

    1997-09-01

    The largest fraction of all energy consumed by society is in the form of heat at a temperature below 150 deg. C, and the use of nuclear energy to provide this sort of energy has been examined for the past several years. Accordingly the IAEA has been involved in related activities ever since the various technical approaches were first discussed in the late 1970s within the Nuclear Power Programme. A number of meetings, such as Technical Committee meetings and Advisory Group meetings have been held, and their results have usually been published in IAEA-TECDOCs, the last of in 1991. Refs, figs, tabs.

  13. How to Deliver Open Sustainable Innovation: An Integrated Approach for a Sustainable Marketable Product

    Francesco Cappa

    2016-12-01

    Full Text Available The adoption of open innovation and peer production, powered by 3D printing technology, is transforming traditional manufacturing methods towards a “third industrial revolution”. The purpose of this research is to provide empirical evidence for an integrated approach, based on collaborative product development and peer production, combined with 3D printing, to deliver more sustainable, yet competitive, marketable products. In particular, this experimental study is conducted in the context of mobile forensics, an emerging market where limited expensive products exist and alternative solutions are needed. The technical viability and economic feasibility of the prototype developed in this research validate the proposed integrated approach, which could be a game-changer in the field of mobile forensics, as well as in other sectors. The sustainability improvements with this approach are a reduction of the total cost, thereby making it affordable for lower income users, and a decrease in energy consumption and pollutant emissions. The validated integrated approach offers start-up opportunities to develop and deliver more sustainable, marketable products, towards the paradigm of Open Sustainable Innovation. While the device developed and tested in this research has similar features to existing products, the methodology, implementation, and motivation are original.

  14. Local Support Mechanisms for Entrepreneurship: The Approach of Local Development and Innovation Institutions

    Katimertzopoulos, F.

    2017-03-01

    Full Text Available Purpose: The growth potential of SMEs entrepreneurship is examined at regional and local level, initially on a Global scale and then for the case of Greece. Additionally, the possibility of an economic development policy beyond the macroeconomic approach is examined, focusing on business growth and competitiveness in the light of meso and micro-economic policy approach. Design/methodology/approach: This research leads to the proposal of building knowledge mechanisms and direct and efficient systematic development and innovation at the local level, particularity during a time of economic crisis. The establishment of Institutes of Local Development and Innovation (ITAK is primarily geared towards promoting innovative entrepreneurship and extroversion of locally installed businesses. As part of the proposal for the establishment of ITAK, a questionnaire was developed - a tool to initially measure companies' opinions on the need for outside help in the macro, meso and micro environment, in order to demonstrate that ITAK local-level structures could be developed. Findings: The survey results were accrued via the analysis of questionnaires distributed to companies. The results of the questionnaires in the micro-environment in relation to those in the macro-environment shows a lower tendency to change business, which may be because managers perceive economics several times more in macroeconomic terms rather than in meso and micro economic (terms. Research limitations/implications: The restrictions of this particular research are the small sample of study of businesses in one country (Greece; this is because the approach of study, which is quantitative-qualitative, limits analysis to small data sets in the current phase. Originality/value: The results in the micro-environment, in relation to those at macro-environmental, shows a lower tendency to change business, something which may be because managers perceive economics several times more in

  15. Sustainable urban energy planning: A strategic approach to meeting climate and energy goals

    Dobriansky, Larisa

    2010-09-15

    Meeting our 21st century challenges will require sustainable energy planning by our cities, where over half of the population resides. This already has become evident in the State of California, which has set rigorous greenhouse gas emission reduction targets and timeframes. To attain these targets will necessitate technically-integrated and cost-optimum solutions for innovative asset development and management within urban communities. Using California as a case study, this paper focuses on the crucial role for sustainable energy planning in creating the context and conditions for integrating and optimizing clean and efficient energy use with the urban built environment and infrastructure.

  16. Building tobacco control research in Thailand: meeting the need for innovative change in Asia.

    Hamann, Stephen L; Mock, Jeremiah; Hense, Sibasis; Charoenca, Naowarut; Kungskulniti, Nipapun

    2012-01-28

    In low- and middle-income countries (LMICs) over the past two decades locally relevant tobacco control research has been scant. Experience shows that tobacco control measures should be based on sound research findings to ensure that measures are appropriate for local conditions and that they are likely to have an impact. Research should also be integrated within tobacco control measures to ensure ongoing learning and the production of knowledge. Thailand, a middle-income country, has a public health community with a record of successful tobacco control and a longstanding commitment to research. Thailand's comprehensive approach includes taxation; bans on tobacco advertising, sponsorship and promotion; smoke-free areas; graphic cigarette pack warnings; social marketing campaigns; cessation counseling; and an established tobacco control research program. The purpose of this study was to document and analyze the development of tobacco control research capacity in Thailand and the impact of research on Thai tobacco control measures. We used mixed methods including review of historical documentation and policy reports, qualitative interviews with key members of Thailand's tobacco control community, and an analysis of research productivity. In Thailand, tobacco control research has evolved through three phases: (1) discovery of the value of research in the policymaking arena, (2) development of a structure to support research capacity building through international collaborations supported by foreign funding agencies, and (3) delivery of locally relevant research made possible largely through substantial stable funding from a domestic health promotion foundation. Over two decades, Thai tobacco control advocates have constructed five steppingstones to success: (1) adapting foreign research to inform policymaking and lobbying for more support for domestic research; (2) attracting foreign funding agencies to support small-scale research and capacity building; (3

  17. Building tobacco control research in Thailand: meeting the need for innovative change in Asia

    Hamann Stephen L

    2012-01-01

    Full Text Available Abstract Introduction In low- and middle-income countries (LMICs over the past two decades locally relevant tobacco control research has been scant. Experience shows that tobacco control measures should be based on sound research findings to ensure that measures are appropriate for local conditions and that they are likely to have an impact. Research should also be integrated within tobacco control measures to ensure ongoing learning and the production of knowledge. Thailand, a middle-income country, has a public health community with a record of successful tobacco control and a longstanding commitment to research. Thailand's comprehensive approach includes taxation; bans on tobacco advertising, sponsorship and promotion; smoke-free areas; graphic cigarette pack warnings; social marketing campaigns; cessation counseling; and an established tobacco control research program. The purpose of this study was to document and analyze the development of tobacco control research capacity in Thailand and the impact of research on Thai tobacco control measures. Method We used mixed methods including review of historical documentation and policy reports, qualitative interviews with key members of Thailand's tobacco control community, and an analysis of research productivity. Findings In Thailand, tobacco control research has evolved through three phases: (1 discovery of the value of research in the policymaking arena, (2 development of a structure to support research capacity building through international collaborations supported by foreign funding agencies, and (3 delivery of locally relevant research made possible largely through substantial stable funding from a domestic health promotion foundation. Over two decades, Thai tobacco control advocates have constructed five steppingstones to success: (1 adapting foreign research to inform policymaking and lobbying for more support for domestic research; (2 attracting foreign funding agencies to support small

  18. System-functional approach in enterprise''s innovation activity management

    Olikh, L.; Maslyukivska, А.

    2012-01-01

    The article is devoted to the problems of forming management system of enterprise innovation activity. The authors pick out the enterprise's innovation subsystem main parts and generalize management functions' realization in the context of its innovation activity management.

  19. Technical and Sociological Approaches for Curriculum Innovation on Clothing Education Department

    Tristantie, N.

    2018-02-01

    Education in the context of social and technical development is defined as the main factor in the learning process which is implied into curriculum. It needs to be anticipated responsively how the goals of Clothing Education Department should be achieved. The sociological and technological through curriculum innovation at Clothing Education Department aims to gain good profile of the professional graduates in the future. By using the literature study, it is found out that sociological development and technological approach are the main foundation for sustainability of Clothing Education Department.

  20. An innovation management approach for renewable energy deployment. The case of solar photovoltaic (PV) technology

    Shum, Kwok L.; Watanabe, Chihiro

    2009-01-01

    In the discussion of renewable energy deployment, one key concern is the various types of barriers that renewable energy needs to overcome before it can make its way into the mainstream. These barriers increasingly shift from the technical to the economic and institutional. The most general types of barriers are due to technological 'lock-out' or to carbon 'lock-in' [. Understanding carbon lock-in. Energy Policy 28(12), 817-830 (Elsevier)]. These barriers necessitate the development of a strategic approach to deploy or introduce renewable energy technology. Existing energy policy has mostly relied upon financial subsidies, market-based instruments such as renewable portfolio standards, and production tax credits to stimulate the installation and use of equipment to generate electricity from renewable sources. These strategies target mostly system-level decisions of end users. The purpose of this paper is to present an innovation perspective on the renewable energy deployment process by introducing the innovation value-added chain (IVC) framework. The analytical objective of IVC is to evaluate the impact of a new innovation on the various stakeholders and players in the development and deployment processes. A deployment or innovation strategy that causes minimal disruption, enhances existing competencies, or expedites new learning by the players has a higher chance to succeed. We draw upon two sets of system integration costs data for grid-connected distributed photovoltaic (PV) systems in Japan and the United States and demonstrate conspicuously different dynamic learning behaviors. These two deployment models can be understood in terms of how the IVCs are organized and how PV system integration projects are performed in the field. In addition, IVC-based findings can inform the targeted application of conventional financial subsidies for learning investment not only at the PV system level, but also at the (localized) system integration level. This would involve

  1. Final Report for Harvesting a New Wind Crop: Innovative Economic Approaches for Rural America

    Susan Innis; Randy Udall; Project Officer - Keith Bennett

    2005-09-30

    Final Report for ''Harvesting a New Wind Crop: Innovative Economic Approaches for Rural America'': This project, ''Harvesting a New Wind Crop'', helped stimulate wind development by rural electric cooperatives and municipal utilities in Colorado. To date most of the wind power development in the United States has been driven by large investor-owned utilities serving major metropolitan areas. To meet the 5% by 2020 goal of the Wind Powering America program the 2,000 municipal and 900 rural electric cooperatives in the country must get involved in wind power development. Public power typically serves rural and suburban areas and can play a role in revitalizing communities by tapping into the economic development potential of wind power. One barrier to the involvement of public power in wind development has been the perception that wind power is more expensive than other generation sources. This project focused on two ways to reduce the costs of wind power to make it more attractive to public power entities. The first way was to develop a revenue stream from the sale of green tags. By selling green tags to entities that voluntarily support wind power, rural coops and munis can effectively reduce their cost of wind power. Western Resource Advocates (WRA) and the Community Office for Resource Efficiency (CORE) worked with Lamar Light and Power and Arkansas River Power Authority to develop a strategy to use green tags to help finance their wind project. These utilities are now selling their green tags to Community Energy, Inc., an independent for-profit marketer who in turn sells the tags to consumers around Colorado. The Lamar tags allow the University of Colorado-Boulder, the City of Boulder, NREL and other businesses to support wind power development and make the claim that they are ''wind-powered''. This urban-rural partnership is an important development for the state of Colorado's rural communities

  2. Stakeholder Meeting: Integrated Knowledge Translation Approach to Address the Caregiver Support Gap.

    Holroyd-Leduc, Jayna M; McMillan, Jacqueline; Jette, Nathalie; Brémault-Phillips, Suzette C; Duggleby, Wendy; Hanson, Heather M; Parmar, Jasneet

    2017-03-01

    Family caregivers are an integral and increasingly overburdened part of the health care system. There is a gap between what research evidence shows is beneficial to caregivers and what is actually provided. Using an integrated knowledge translation approach, a stakeholder meeting was held among researchers, family caregivers, caregiver associations, clinicians, health care administrators, and policy makers. The objectives of the meeting were to review current research evidence and conduct multi-stakeholder dialogue on the potential gaps, facilitators, and barriers to the provision of caregiver supports. A two-day meeting was attended by 123 individuals. Three target populations of family caregivers were identified for discussion: caregivers of seniors with dementia, caregivers in end-of-life care, and caregivers of frail seniors with complex health needs. The results of this meeting can and are being used to inform the development of implementation research endeavours and policies targeted at providing evidence-informed caregiver supports.

  3. The role of innovation in merger policy: Europe’s efficiency defence versus America’s innovation markets approach

    Cefis, E.; Grondsma, M.; Sabidussi, A.; Schenk, E.J.J

    2007-01-01

    Changes in the world’s economies and discussions in the literature about the growing importance of innovation to firms have given rise to a demand for expanding the analysis of merger policy. The present study focuses on the different criteria used to assess the impact of M&A activities on

  4. Facilitating innovation : an action-oriented approach and participatory methodology to improve innovative social practice in agriculture

    Engel, P.G.H.

    1995-01-01

    This study focuses upon the social organization of innovation. It makes use of insights from knowledge and information systems research, development sociology, management science and applied philosophy and seeks answers to the following questions: What do social actors, individuals and/or

  5. A Study of Difficulties and Approaches for Innovative Talents Training of Public Administration Undergraduates

    Zhu, Yanhan; Wu, Juan

    2014-01-01

    The innovation is the soul of one nation making progresses. To build an innovative country, we need to train more innovative talents who is capable of public administration. The innovative talents training of public administration undergraduate faces a lot of problems, such as the influences of traditional culture, the constraint of education…

  6. The economic importance of meetings and conferences: A satellite account approach

    Jones, C; Li, S

    2015-01-01

    Meetings and conventions (MICE) visitation is often considered an important element of the travel economy, and destinations target such activities to encourage their growth. It has hitherto been difficult to measure the economic significance of such activity at any spatial scale. Latterly, the development and codification of tourism satellite account (TSA) approaches to the economic measurement of tourism offers an opportunity to develop a parallel approach to understanding the MICE economy. ...

  7. Analysis of eco-innovation with triple helix approach: case-study of biofloc catfish farming in Yogyakarta

    Purwadi, D.; Nurlaily, I.

    2018-03-01

    Concerning environmental into focus of innovation process will expand the number of actor involved. Eco-innovation and triple helix are often frameworks applied to analyse how environmental concern are integrated in innovation process and how different stakeholder groups are having inter relation. Case study from biofloc catfish farming in Yogyakarta is presented to demonstrate a possible approach for researching the success of triple helix frameworks. This case is considered on basic of the result of a survey among farmers, academician and government. The paper concludes the creating of full triple helix encounters problem in practice. It also includes suggestion for further research on fisheries development.

  8. Propagation of New Innovations: An Approach to Classify Human Behavior and Movement from Available Social Network Data

    Mahmud, Faisal; Samiul, Hasan

    2010-01-01

    It is interesting to observe new innovations, products, or ideas propagating into the society. One important factor of this propagation is the role of individual's social network; while another factor is individual's activities. In this paper, an approach will be made to analyze the propagation of different ideas in a popular social network. Individuals' responses to different activities in the network will be analyzed. The properties of network will also be investigated for successful propagation of innovations.

  9. Innovative approach for increasing physical activity among breast cancer survivors: protocol for Project MOVE, a quasi-experimental study.

    Caperchione, Cristina M; Sabiston, Catherine M; Clark, Marianne I; Bottorff, Joan L; Toxopeus, Renee; Campbell, Kristin L; Eves, Neil D; Ellard, Susan L; Gotay, Carolyn

    2016-08-16

    Physical activity is a cost-effective and non-pharmaceutical strategy that can help mitigate the physical and psychological health challenges associated with breast cancer survivorship. However, up to 70% of women breast cancer survivors are not meeting minimum recommended physical activity guidelines. Project MOVE is an innovative approach to increase physical activity among breast cancer survivors through the use of Action Grants, a combination of microgrants (small amounts of money awarded to groups of individuals to support a physical activity initiative) and financial incentives. The purpose of this paper is to describe the rationale and protocol of Project MOVE. A quasi-experimental pre-post design will be used. Twelve groups of 8-12 adult women who are breast cancer survivors (N=132) were recruited for the study via face-to-face meetings with breast cancer-related stakeholders, local print and radio media, social media, and pamphlets and posters at community organisations and medical clinics. Each group submitted a microgrant application outlining their proposed physical activity initiative. Successful applicants were determined by a grant review panel and informed of a financial incentive on meeting their physical activity goals. An evaluation of feasibility will be guided by the reach, effectiveness, adoption, implementation, maintenance (RE-AIM) framework and assessed through focus groups, interviews and project-related reports. Physical activity will be assessed through accelerometry and by self-report. Quality of life, motivation to exercise and social connection will also be assessed through self-report. Assessments will occur at baseline, 6 months and 1 year. Ethical approval was obtained from the University of British Columbia's Behavioural Research Ethics Board (#H14-02502) and has been funded by the Canadian Cancer Society Research Institute (project number #702913). Study findings will be disseminated widely through peer-reviewed publications

  10. An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

    Nakae, Nobuo; Ozawa, Takayuki; Ohta, Hirokazu; Ogata, Takanari; Sekimoto, Hiroshi

    2014-01-01

    One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel

  11. An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

    Nakae, Nobuo, E-mail: nakae-nobuo@jnes.go.jp [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Ozawa, Takayuki [Advanced Nuclear System Research and Development Directorate, Japan Atomic Energy Agency, 4-33, Muramatsu, Tokai-mura, Ibaraki-ken 319-1194 (Japan); Ohta, Hirokazu; Ogata, Takanari [Nuclear Technology Research Laboratory, Central Research Institute of Electric Power Industry, 2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511 (Japan); Sekimoto, Hiroshi [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

    2014-03-15

    One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel.

  12. The Third International Meeting on Genetic Disorders in the RAS/MAPK Pathway: Toward a Therapeutic Approach

    Korf, Bruce; Ahmadian, Reza; Allanson, Judith; Aoki, Yoko; Bakker, Annette; Wright, Emma Burkitt; Denger, Brian; Elgersma, Ype; Gelb, Bruce D.; Gripp, Karen W.; Kerr, Bronwyn; Kontaridis, Maria; Lazaro, Conxi; Linardic, Corinne; Lozano, Reymundo

    2015-01-01

    "The Third International Meeting on Genetic Disorders in the RAS/MAPK Pathway: Towards a Therapeutic Approach" was held at the Renaissance Orlando at SeaWorld Hotel (August 2-4, 2013). Seventy-one physicians and scientists attended the meeting, and parallel meetings were held by patient advocacy groups (CFC International, Costello Syndrome Family Network, NF Network and Noonan Syndrome Foundation). Parent and patient advocates opened the meeting with a panel discussion to set the stage regard...

  13. Engaging informal audiences in learning about and responding to climate change through a portfolio of innovative approaches

    Pfirman, S. L.; Brunacini, J.; Orlove, B. S.; Bachrach, E.; Hamilton, L.

    2017-12-01

    Informal learners have many different backgrounds, experiences, and perspectives. How can informal educators effectively reach such diverse audiences, meeting people where they are with regard to climate change? The Polar Learning and Responding: PoLAR Climate Change Education Partnership, supported by NSF, employs surveys, resource development, and research to develop innovative, evidence-based approaches that engage lifelong learners. General-public surveys on climate change yield insights on the knowledge and perceptions that informal learners bring to the table. That helps guide the creation of new tools for effective communication. For example, many people are unsure what causes sea level to rise. The Polar Explorer: Sea Level app uses a data and question-based approach guiding people through interactive maps to learn about melting land ice. In addition, people also tend to believe that climate impacts will happen in the future. Polar Voices podcasts feature Arctic Indigenous communities sharing first-hand experiences with climate change. Prior knowledge can be harnessed to enhance learning. Arctic SMARTIC engages people in role-playing negotiations with others to create a marine management plan. Climate game jams provide collaborative, creative spaces where participants learn as they interact with others. In each case participants, with all their knowledge and experience, are brought into group problem-solving. Understanding whom people trust for climate-change information offers insights that help them become climate communicators. Even those who are concerned about climate often do not discuss it with family and friends (Maibach et al. 2016), yet our research shows that family and friends are second only to scientists as trusted sources of climate information (Hamilton 2016). Fun and novel educational tools such as the EcoChains card game and the EcoKoin social networking app serve as conversation starters.

  14. The IAEA international project on innovative nuclear reactors and fuel cycles (INPRO):status, development of approaches and outlook

    Khoroshev, M.; Sokolov, Y.; Facer, I.

    2005-01-01

    During the last fifty years remarkable results have been achieved in the application of nuclear technology for the production of electricity. Looking ahead to the next fifty years it is clear that the demand for energy will grow considerably and also new requirements have to be fulfilled for the way nuclear energy will be supplied, UNCSD, WSSD, IPCC and others have emphasized the substantial growth in 21st century energy supplies needed to meet sustainable development (SD) goals. This will be driven by continuing population growth, economic development and aspiration to provide access to modern energy systems to be 1,6 billion people now without such access, the growth demand on limiting greenhouse gas emissions, and reducing the risk oaf climate change. A key factor to the future of nuclear power is the degree to which innovative nuclear technologies can be developed to meet challenges of economic competitiveness, safety,waste and proliferation concerns. There are two major international initiatives in the area of innovative nuclear technology: the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycle (INPRO) and the Generation IV International Forum. Following a resolution of the General Conference of the IAEA in the year 2000 an International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated (Authors)

  15. New approaches of organizing care and work: giving way to participation, mobilization, and innovation.

    Viens, Chantal; Lavoie-Tremblay, Mélanie; Leclerc, Martine Mayrand; Brabant, Louise Hamelin

    2005-01-01

    Quebec's health network has undertaken large-scale organizational changes to ensure the continuity, accessibility, and quality of health care and services for the population. This article describes the optimal approach for making changes to the organization of care and work for patients, health care workers, and organizations. This participative action research was carried out by means of interviews and document analysis. One hundred participants were involved, describing a total of 34 projects for significant organizational change. Results include an optimal approach broken down into 4 phases, each of which includes steps, facilitating factors, and potential difficulties. The phases of this approach are: (1) sharing the vision, mission, and values of the organization and identifying the purpose and need underlying the change; (2) building alliances and validating the involvement of the various players; (3) conceptualizing and planning the project; and (4) implementing changes and continuing evaluation. It is possible to rise to the challenge of finding new approaches to organize care and work by giving way to participation, mobilization, and innovation.

  16. The underlying mechanisms of genetic innovation and speciation in the family Corynebacteriaceae: A phylogenomics approach.

    Zhi, Xiao-Yang; Jiang, Zhao; Yang, Ling-Ling; Huang, Ying

    2017-02-01

    The pangenome of a bacterial species population is formed by genetic reduction and genetic expansion over the long course of evolution. Gene loss is a pervasive source of genetic reduction, and (exogenous and endogenous) gene gain is the main driver of genetic expansion. To understand the genetic innovation and speciation of the family Corynebacteriaceae, which cause a wide range of serious infections in humans and animals, we analyzed the pangenome of this family, and reconstructed its phylogeny using a phylogenomics approach. Genetic variations have occurred throughout the whole evolutionary history of the Corynebacteriaceae. Gene loss has been the primary force causing genetic changes, not only in terms of the number of protein families affected, but also because of its continuity on the time series. The variation in metabolism caused by these genetic changes mainly occurred for membrane transporters, two-component systems, and metabolism related to amino acids and carbohydrates. Interestingly, horizontal gene transfer (HGT) not only caused changes related to pathogenicity, but also triggered the acquisition of antimicrobial resistance. The Darwinian theory of evolution did not adequately explain the effects of dispersive HGT and/or gene loss in the evolution of the Corynebacteriaceae. These findings provide new insight into the evolution and speciation of Corynebacteriaceae and advance our understanding of the genetic innovation in microbial populations. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Cluster approach to realization of innovation development strategy for the agroindustrial complex of the region

    Valentina Aleksandrovna Kundius

    2011-12-01

    Full Text Available This paper reviews cluster approach as an innovative management technology for the regional economy. The results of studying the theory and practice of clustering of the regional economy, the formation of agribusiness and food clusters in agribusiness are presented. Basic features and operation of the cluster systems are revealed and distinguished from other forms of cooperative and economic interactions between small and big business features, motivational components of integration into clusters. On the basis of scientific propositions, a model of regional economic clusters is formulated; specific territorial distribution and level of aggregation of clusters in the agricultural sector were distinguished. It is proposed to refer agroindustrial clusters to the clusters that represent the associations of organization of various fields in a single reproduction cycle from raw material to finished products sales including all stages of reproduction on the basis of innovation and investment activity. A structuring work on principles of agro-clusters was held, sustainable competitive advantage and the formation mechanisms of the development of agro-industrial clusters have been grounded.

  18. Implementing and Innovating Marine Monitoring Approaches for Assessing Marine Environmental Status

    Danovaro, Roberto; Carugati, Laura; Berzano, Marco; Cahill, Abigail E.; Carvalho, Susana; Chenuil, Anne; Corinaldesi, Cinzia; Cristina, Sonia; David, Romain; Dell'Anno, Antonio; Dzhembekova, Nina; Garcé s, Esther; Gasol, Joseph M.; Goela, Priscila; Fé ral, Jean-Pierre; Ferrera, Isabel; Forster, Rodney M.; Kurekin, Andrey A.; Rastelli, Eugenio; Marinova, Veselka; Miller, Peter I.; Moncheva, Snejana; Newton, Alice; Pearman, John K.; Pitois, Sophie G.; Reñ é , Albert; Rodrí guez-Ezpeleta, Naiara; Saggiomo, Vincenzo; Simis, Stefan G. H.; Stefanova, Kremena; Wilson, Christian; Lo Martire, Marco; Greco, Silvestro; Cochrane, Sabine K. J.; Mangoni, Olga; Borja, Angel

    2016-01-01

    Marine environmental monitoring has tended to focus on site-specific methods of investigation. These traditional methods have low spatial and temporal resolution and are relatively labor intensive per unit area/time that they cover. To implement the Marine Strategy Framework Directive (MSFD), European Member States are required to improve marine monitoring and design monitoring networks. This can be achieved by developing and testing innovative and cost-effective monitoring systems, as well as indicators of environmental status. Here, we present several recently developed methodologies and technologies to improve marine biodiversity indicators and monitoring methods. The innovative tools are discussed concerning the technologies presently utilized as well as the advantages and disadvantages of their use in routine monitoring. In particular, the present analysis focuses on: (i) molecular approaches, including microarray, Real Time quantitative PCR (qPCR), and metagenetic (metabarcoding) tools; (ii) optical (remote) sensing and acoustic methods; and (iii) in situ monitoring instruments. We also discuss their applications in marine monitoring within the MSFD through the analysis of case studies in order to evaluate their potential utilization in future routine marine monitoring. We show that these recently-developed technologies can present clear advantages in accuracy, efficiency and cost.

  19. Fostering the Self-Renewal of Teachers: An Underutilized Approach to Innovating Interdisciplinary Education

    David J. Waters

    2013-06-01

    Full Text Available Our goal is to call teachers’ attention to the need for selfrenewal, challenging them to consider it a necessary approach to innovating interdisciplinary education. Our prescription for sustained self-renewal: Each teacher assembles a gallery of intellectual heroes — gifted and articulate thinkers — to serve as their own life-long teachers. In this paper, we share our experience teaching a "skills course" to interdisciplinary graduate students in Purdue University’s Center on Aging and the Life Course. The course, titled "To See and To Seize Opportunities", exposes scholars-in-training to an array of skills and attitudes that foster self-renewal and peak performance. Leading educators must work hard to create better opportunities for self-renewal. By envisioning even our best teachers as unfinished and under construction, we open up a new dialogue situating the self-renewal of teachers at the very core of educational excellence across a broad range of disciplines. To innovate interdisciplinary education, we believe it is time for a curricular re-think, emphasizing the importance of a transdisciplinary skills course in which teachers and their students can explore transformative ideas on personal development and self-renewal — in the classroom together.

  20. Implementing and Innovating Marine Monitoring Approaches for Assessing Marine Environmental Status

    Danovaro, Roberto

    2016-11-23

    Marine environmental monitoring has tended to focus on site-specific methods of investigation. These traditional methods have low spatial and temporal resolution and are relatively labor intensive per unit area/time that they cover. To implement the Marine Strategy Framework Directive (MSFD), European Member States are required to improve marine monitoring and design monitoring networks. This can be achieved by developing and testing innovative and cost-effective monitoring systems, as well as indicators of environmental status. Here, we present several recently developed methodologies and technologies to improve marine biodiversity indicators and monitoring methods. The innovative tools are discussed concerning the technologies presently utilized as well as the advantages and disadvantages of their use in routine monitoring. In particular, the present analysis focuses on: (i) molecular approaches, including microarray, Real Time quantitative PCR (qPCR), and metagenetic (metabarcoding) tools; (ii) optical (remote) sensing and acoustic methods; and (iii) in situ monitoring instruments. We also discuss their applications in marine monitoring within the MSFD through the analysis of case studies in order to evaluate their potential utilization in future routine marine monitoring. We show that these recently-developed technologies can present clear advantages in accuracy, efficiency and cost.

  1. Towards realistic design of wind dams: An innovative approach to enhance wind potential

    Tajeddin, Alireza; Fazelpour, Farivar

    2016-01-01

    Highlights: • An innovative methodology to increase the wind potential. • Introducing new generation of wind dams and underground wind farms. • Reducing the environmental impacts of employing conventional wind farms. • An efficient method to employ low wind speeds. - Abstract: In an attempt to discover alternative energy sources to fossil fuels which are being depleted on the increase, Renewable Energy Sources (RES) have gained considerable attention in recent years. RESs are also represented as clean sources; emitting comparatively lower Greenhouse Gases (GHGs) emissions; thus, they are climate friendly. Among RESs, wind energy is one of the most abundant and increasingly cost-competitive energy resources, and it is becoming the fastest growing source of electricity in the world. Regarding the improvement of wind power, one of the key aspects that must be considered is achieving enhanced reliability and efficiency at once. In this paper, we introduced and applied an innovative method to make wind dam which is a new approach to wind farms’ site selection for production of electricity. The proposed method enhances the wind potential by means of a natural or artificial barrier such as a hill, and is supported by analytical expressions and Computational Fluid Dynamics (CFD) models. A systematic case study has been designed at a site near the city of Tehran, Iran, and an analytical method has been applied that includes meteorological data analysis, CFD modeling along with energy power and economic assessment.

  2. When opportunity meets motivation: Neural engagement during social approach is linked to high approach motivation.

    Radke, Sina; Seidel, Eva-Maria; Eickhoff, Simon B; Gur, Ruben C; Schneider, Frank; Habel, Ute; Derntl, Birgit

    2016-02-15

    Social rewards are processed by the same dopaminergic-mediated brain networks as non-social rewards, suggesting a common representation of subjective value. Individual differences in personality and motivation influence the reinforcing value of social incentives, but it remains open whether the pursuit of social incentives is analogously supported by the neural reward system when positive social stimuli are connected to approach behavior. To test for a modulation of neural activation by approach motivation, individuals with high and low approach motivation (BAS) completed implicit and explicit social approach-avoidance paradigms during fMRI. High approach motivation was associated with faster implicit approach reactions as well as a trend for higher approach ratings, indicating increased approach tendencies. Implicit and explicit positive social approach was accompanied by stronger recruitment of the nucleus accumbens, middle cingulate cortex, and (pre-)cuneus for individuals with high compared to low approach motivation. These results support and extend prior research on social reward processing, self-other distinctions and affective judgments by linking approach motivation to the engagement of reward-related circuits during motivational reactions to social incentives. This interplay between motivational preferences and motivational contexts might underlie the rewarding experience during social interactions. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. PREFACE: E-MRS 2012 Spring Meeting, Symposium M: More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics

    Wenger, Christian; Fompeyrine, Jean; Vallée, Christophe; Locquet, Jean-Pierre

    2012-12-01

    More than Moore explores a new area of Silicon based microelectronics, which reaches beyond the boundaries of conventional semiconductor applications. Creating new functionality to semiconductor circuits, More than Moore focuses on motivating new technological possibilities. In the past decades, the main stream of microelectronics progresses was mainly powered by Moore's law, with two focused development arenas, namely, IC miniaturization down to nano scale, and SoC based system integration. While the microelectronics community continues to invent new solutions around the world to keep Moore's law alive, there is increasing momentum for the development of 'More than Moore' technologies which are based on silicon technologies but do not simply scale with Moore's law. Typical examples are RF, Power/HV, Passives, Sensor/Actuator/MEMS or Bio-chips. The More than Moore strategy is driven by the increasing social needs for high level heterogeneous system integration including non-digital functions, the necessity to speed up innovative product creation and to broaden the product portfolio of wafer fabs, and the limiting cost and time factors of advanced SoC development. It is believed that More than Moore will add value to society on top of and beyond advanced CMOS with fast increasing marketing potentials. Important key challenges for the realization of the 'More than Moore' strategy are: perspective materials for future THz devices materials systems for embedded sensors and actuators perspective materials for epitaxial approaches material systems for embedded innovative memory technologies development of new materials with customized characteristics The Hot topics covered by the symposium M (More than Moore: Novel materials approaches for functionalized Silicon based Microelectronics) at E-MRS 2012 Spring Meeting, 14-18 May 2012 have been: development of functional ceramics thin films New dielectric materials for advanced microelectronics bio- and CMOS compatible

  4. U.S. EPA Water Technology Innovation Cluster Leaders Meeting - "Successfully Supporting Early-Stage Companies: The Role of Technology Testing" Meeting Summary Report

    The goals of this workshop were to: (1) increase the cluster leaders’ level of knowledge regarding past and current water technology testing programs, facilities and requirements; (2) learn from the experiences of technology vendors in getting innovative, commercial-ready product...

  5. Towards sustained Innovation in Education using Design-Based-Research - A new Approach to Teaching Electricity

    CERN. Geneva

    2018-01-01

    The influence of Physics Education Research (PER) on teaching in schools is often rather limited. Design-Based-Research tries to overcome this often-criticised research-practice gap by developing and evaluating new approaches to teaching physics. Using a variety of qualitative and quantitative research methods and working closely with schools, design research strives to find evidence-based solutions to pressing educational problems. One such problem in physics education is that most students fail to correctly analyse electric circuits even after instruction as they tend to reason exclusively with current and resistance. Effective reasoning about electric circuits, however, requires a solid understanding of voltage and potential. At the example of the development and evaluation of an innovative curriculum to teach electricity based on the electron gas model, the presentation will give an introduction to Design-Based-Research in PER.

  6. Innovative Approach to the Accumulation of Rubrosterone by Fermentation of Asparagus filicinus with Fusarium oxysporum.

    Li, Ying; Cai, Le; Dong, Jian-Wei; Xing, Yun; Duan, Wei-He; Zhou, Hao; Ding, Zhong-Tao

    2015-07-29

    Rubrosterone, possessing various remarkable bioactivities, is an insect-molting C19-steroid. However, only very small amounts are available for biological tests due to its limited content from plant sources. Fungi of genus Fusarium have been reported to have the ability to convert C27-steroids into C19-steroids. In this study, Asparagus filicinus, containing a high content of 20-hydroxyecdysone, was utilized to accumulate rubrosterone through solid fermentation by Fusarium oxysporum. The results showed that F. oxysporum had the ability to facilitate the complete biotransformation of 20-hydroxyecdysone to rubrosterone by solid-state fermentation. The present method could be an innovative and efficient approach to accumulate rubrosterone with an outstanding conversion ratio.

  7. Innovations in ILC detector design using a particle flow algorithm approach

    Magill, S.; High Energy Physics

    2007-01-01

    The International Linear Collider (ILC) is a future e + e - collider that will produce particles with masses up to the design center-of-mass (CM) energy of 500 GeV. The ILC complements the Large Hadron Collider (LHC) which, although colliding protons at 14 TeV in the CM, will be luminosity-limited to particle production with masses up to ∼1-2 TeV. At the ILC, interesting cross-sections are small, but there are no backgrounds from underlying events, so masses should be able to be measured by hadronic decays to dijets (∼80% BR) as well as in leptonic decay modes. The precise measurement of jets will require major detector innovations, in particular to the calorimeter, which will be optimized to reconstruct final state particle 4-vectors--called the particle flow algorithm approach to jet reconstruction

  8. State strategies of governance in biomedical innovation: aligning conceptual approaches for understanding 'Rising Powers' in the global context

    Faulkner Alex

    2011-02-01

    Full Text Available Abstract Background 'Innovation' has become a policy focus in its own right in many states as they compete to position themselves in the emerging knowledge economies. Innovation in biomedicine is a global enterprise in which 'Rising Power' states figure prominently, and which undoubtedly will re-shape health systems and health economies globally. Scientific and technological innovation processes and policies raise difficult issues in the domains of science/technology, civil society, and the economic and healthcare marketplace. The production of knowledge in these fields is complex, uncertain, inter-disciplinary and inter-institutional, and subject to a continuing political struggle for advantage. As part of this struggle, a wide variety of issues - regulation, intellectual property, ethics, scientific boundaries, healthcare market formation - are raised and policy agendas negotiated. Methods A range of social science disciplines and approaches have conceptualised such innovation processes. Against a background of concepts such as the competition state and the developmental state, and national innovation systems, we give an overview of a range of approaches that have potential for advancing understanding of governance of global life science and biomedical innovation, with special reference to the 'Rising Powers', in order to examine convergences and divergences between them. Conceptual approaches that we focus on include those drawn from political science/political economy, sociology of technology; Innovation Studies and Science & Technology Studies. The paper is part of a project supported by the UK ESRC's Rising Powers programme. Results We show convergences and complementarities between the approaches discussed, and argue that the role of the national state itself has become relatively neglected in much of the relevant theorising. Conclusions We conclude that an approach is required that enables innovation and governance to be seen as 'co

  9. State strategies of governance in biomedical innovation: aligning conceptual approaches for understanding 'Rising Powers' in the global context

    2011-01-01

    Background 'Innovation' has become a policy focus in its own right in many states as they compete to position themselves in the emerging knowledge economies. Innovation in biomedicine is a global enterprise in which 'Rising Power' states figure prominently, and which undoubtedly will re-shape health systems and health economies globally. Scientific and technological innovation processes and policies raise difficult issues in the domains of science/technology, civil society, and the economic and healthcare marketplace. The production of knowledge in these fields is complex, uncertain, inter-disciplinary and inter-institutional, and subject to a continuing political struggle for advantage. As part of this struggle, a wide variety of issues - regulation, intellectual property, ethics, scientific boundaries, healthcare market formation - are raised and policy agendas negotiated. Methods A range of social science disciplines and approaches have conceptualised such innovation processes. Against a background of concepts such as the competition state and the developmental state, and national innovation systems, we give an overview of a range of approaches that have potential for advancing understanding of governance of global life science and biomedical innovation, with special reference to the 'Rising Powers', in order to examine convergences and divergences between them. Conceptual approaches that we focus on include those drawn from political science/political economy, sociology of technology; Innovation Studies and Science & Technology Studies. The paper is part of a project supported by the UK ESRC's Rising Powers programme. Results We show convergences and complementarities between the approaches discussed, and argue that the role of the national state itself has become relatively neglected in much of the relevant theorising. Conclusions We conclude that an approach is required that enables innovation and governance to be seen as 'co-producing' each other in a multi

  10. Development of a Customizable Programme for Improving Interprofessional Team Meetings: An Action Research Approach.

    van Dongen, Jerôme Jean Jacques; van Bokhoven, Marloes Amantia; Goossens, Wilhelmus Nicolaas Marie; Daniëls, Ramon; van der Weijden, Trudy; Beurskens, Anna

    2018-01-25

    Interprofessional teamwork is increasingly necessary in primary care to meet the needs of people with complex care demands. Needs assessment shows that this requires efficient interprofessional team meetings, focusing on patients' personal goals. The aim of this study was to develop a programme to improve the efficiency and patient-centredness of such meetings. Action research approach: a first draft of the programme was developed, and iteratively used and evaluated by three primary care teams. Data were collected using observations, interviews and a focus group, and analysed using directed content analysis. The final programme comprises a framework to reflect on team functioning, and training activities supplemented by a toolbox. Training is intended for the chairperson and a co-chair, and aims at organizing and structuring meetings, and enhancing patient-centredness. Our findings emphasize the essential role of the team's chairperson, who, in addition to technically structuring meetings, should act as a change agent guiding team development. Findings show that the programme should be customizable to each individual team's context and participants' learning objectives. Becoming acquainted with new structures can be considered a growth process, in which teams have to find their way, with the chairperson as change agent.

  11. Space Culture: Innovative Cultural Approaches To Public Engagement With Astronomy, Space Science And Astronautics

    Malina, Roger F.

    2012-01-01

    In recent years a number of cultural organizations have established ongoing programs of public engagement with astronomy, space science and astronautics. Many involve elements of citizen science initiatives, artists’ residencies in scientific laboratories and agencies, art and science festivals, and social network projects as well as more traditional exhibition venues. Recognizing these programs several agencies and organizations have established mechanisms for facilitating public engagement with astronomy and space science through cultural activities. The International Astronautics Federation has established an Technical Activities Committee for the Cultural Utilization of Space. Over the past year the NSF and NEA have organized disciplinary workshops to develop recommendations relating to art-science interaction and community building efforts. Rationales for encouraging public engagement via cultural projects range from theory of creativity, innovation and invention to cultural appropriation in the context of `socially robust science’ as advocated by Helga Nowotny of the European Research Council. Public engagement with science, as opposed to science education and outreach initiatives, require different approaches. Just as organizations have employed education professionals to lead education activities, so they must employ cultural professionals if they wish to develop public engagement projects via arts and culture. One outcome of the NSF and NEA workshops has been development of a rationale for converting STEM to STEAM by including the arts in STEM methodologies, particularly for K-12 where students can access science via arts and cultural contexts. Often these require new kinds of informal education approaches that exploit locative media, gaming platforms, artists projects and citizen science. Incorporating astronomy and space science content in art and cultural projects requires new skills in `cultural translation’ and `trans-mediation’ and new kinds

  12. STRUCTURE OF THE MARKET OF INNOVATIVE PRODUCTS: APPROACH TO ASSESSING THE IMPACT ON EFFICIENCY

    Anna Elagina

    2015-06-01

    Full Text Available The formation of innovation policy innovative economy is impossible without an understanding of the conceptual basis of the efficiency of production of innovative products. In particular, determination of the influence of market structure on the possibility of expanded reproduction of innovative products. The article is devoted to consideration of existing in this field of research and definition of the limits of quantitative assessment of the influence of defects of market structures on efficiency.

  13. Functions of Innovation Systems : A new approach for analysing technological change

    Hekkert, M.P.; Suurs, R.A.A.; Negro, Simona; Kuhlmann, Stefan; Smits, R.E.H.M.

    2007-01-01

    The central idea of this paper is that innovation systems are a very important determinant of technological change. We describe that the emergence of a new innovation system and changes in existing innovation systems co-evolve with the process of technological change. Therefore, it is necessary to

  14. Contextual Factors Affecting the Innovation Performance of Manufacturing SMEs in Korea: A Structural Equation Modeling Approach

    Ye Seul Choi

    2017-07-01

    Full Text Available This study empirically explores the relationship between innovation performance and the internal and contextual factors driving technological innovation in manufacturing small and medium-sized enterprises (SMEs in metropolitan areas of Korea using structural equation modeling (SEM. Our analysis is based on firm-level data from the Korean Innovation Survey conducted by the Science and Technology Policy Institute in 2012. According to the results, SMEs’ innovation capacity was positively related to technological innovation performance, and SMEs’ skills and technology acquisition is a contextual factor that positively influences their innovation performance. In this process, SMEs’ innovation capacity is a partial mediator between skills and technology acquisition and SMEs’ technological innovation performance. Moreover, the results show that the relationship between government and public policies and SMEs’ innovation performance is mediated by SMEs’ internal innovation capacity. The results imply that both skills and technology acquisition and government and public policies are important contextual factors can increase SMEs’ innovation performance. Based on the results, this study provides implications for policy makers in terms of the policies that provide both direct and support roles in fostering and sustaining innovation, which drives regional economic growth and development.

  15. Evaluation on Innovation approaches on Performance from Malaysian perspective: A study on Malaysian Building energy saving

    Amlus M. H.

    2018-01-01

    Full Text Available Lately Malaysia energy consumption versus generation rapidly shows increasing due to increasing of load. This phenomenon happened following to advanced country development. Lacking on design and without energy management approach the energy consumption and monthly electrical bill will steadily increased and support the increasing of world carbon emission. Therefore the aim of this work is to approach the simplest innovation task-energy audit , which is load-apportioning strategy. This approach using matching the usage of equipment with fully utilized space and reschedules the time of usage. A one week data was collected by logged power meter at main switchboard at selected building using Fluke Power Recorder. From the data collected, current usage of every load can be determine, then load will be arrange into a group with same portion and same time of usage. The result shows clearly the energy consumption for every single day and indicates the highest and lowest peak. From this work the apportioning strategy implemented by rearrange the load following type of room application. After the arrangement, new measurement was taken and a very good result was established. This work also can be further apply for a huge load that can be save a lot of money for owner especially government by energy saving.

  16. Innovative User Defined Density Profile Approach To FSW Of Aluminium Foam

    Contorno, Dorotea; Fratini, Livan; Filice, Luigino; Gagliardi, Francesco; Umbrello, Domenico; Shivpuri, Rajiv

    2007-01-01

    Metallic foams are one of the most exciting materials in the world of mechanical industry due to their reduced mass and the good mechanical, thermal and acoustic characteristics. Consequently, their application, is increasing day by day even with the important drawbacks that reduce their suitability and diffusion such as high manufacturing cost and difficulty in processing. An innovative approach is outlined in this paper that enables the production of complex shapes taking advantage of deformation processing and friction stir welding (FSW). The aim is to create customized tailored manufactured parts. The cellular construction of foams makes this approach rather challenging as the cell walls are extremely thin and deform unpredictably especially in the presence of rotating and moving hard tool. In this paper, an integrated approach to overcome some of the above challenges is proposed. The initial density is modified by using simple deformation processes, in order to obtained the desired 'crushed density', customized for the intended application. Then, the panels are joined to specially designed solid blocks by using FSW process with a proper set-up. Finally, the obtained specimens are evaluated for mechanical performance and the quality of the joint.

  17. An innovative approach to enhance methane hydrate formation kinetics with leucine for energy storage application

    Veluswamy, Hari Prakash; Kumar, Asheesh; Kumar, Rajnish; Linga, Praveen

    2017-01-01

    Highlights: • Innovative combinatorial hybrid approach to reduce nucleation stochasticity and enhance hydrate growth. • Methane hydrate growth curves are similar in UTR and STR configurations in presence of leucine. • Amalgamation of stirred (STR) and unstirred (UTR) configuration is demonstrated. • Reliable method for scale up and commercial production of Solidified Natural Gas (SNG). - Abstract: Natural gas storage in clathrate hydrates or solidified natural gas (SNG) offers the safest, cleanest and the most compact mode of storage aided by the relative ease in natural gas (NG) recovery with minimal cost compared to known conventional methods of NG storage. The stochastic nature of hydrate nucleation and the slow kinetics of hydrate growth are major challenges that needs to be addressed on the SNG production side. A deterministic and fast nucleation coupled with rapid crystallization kinetics would empower this beneficial technology for commercial application. We propose a hybrid combinatorial approach of methane hydrate formation utilizing the beneficial aspect of environmentally benign amino acid (leucine) as a kinetic promoter by combining stirred and unstirred reactor operation. This hybrid approach is simple, can easily be implemented and scaled-up to develop an economical SNG technology for efficient storage of natural gas on a large scale. Added benefits include the minimal energy requirement during hydrate growth resulting in overall cost reduction for SNG technology.

  18. Approaches to the safety of future nuclear power plants. Report of a technical committee meeting

    1996-09-01

    The Technical Committee Meeting on Approaches to Safety of Future Nuclear Power Plants in Different Countries, held from 29 May to 2 June 1995, contributed to this process. Experts from 14 different countries and two international organizations participated in the meeting, which provided the opportunity to exchange information and to review the answers developed to date to these issues (primarily form the IAEA's technical document ''Development of Safety Principles for the Design of Future Nuclear Power Plants'' IAEA-TECDOC-801) and the report of the International Nuclear Safety Advisory Group ''Basic Safety Principles for Nuclear Power Plants'' (INSAG-3). These references were then used as a starting point for answering the question ''to what degree does general agreement (or harmonization) exist on these desired safety approaches for future reactors, and what opportunities remain for further harmonization? 11 refs, 1 tab

  19. Planning an innovation marathon at an infectious disease conference with results from the International Meeting on Emerging Diseases and Surveillance 2016 Hackathon

    John W. Ramatowski

    2017-12-01

    Full Text Available A hackathon is best described as an ‘innovation marathon’. Derived from the words ‘hacking’ and ‘marathon’, it brings together multidisciplinary teams to collaborate intensely over a short period of time to define a problem, devise a solution, and design a working prototype. International scientific meetings are conducive to successful hackathons, providing an audience of expert professionals who describe challenges and ensure the proposed solutions address end-user needs. Collaborations with local organizations and academic centers are crucial to attracting complementary specialties such as IT advisors, engineers, and entrepreneurs to develop sustainable projects. The core process of first identifying and deconstructing a problem followed by solution iteration is applicable to challenges at workplaces around the world. Ultimately, this model can be used to drive innovation and catalyze change in the global health community. The planning, execution, and outcomes of a hackathon event organized in conjunction with the International Meeting on Emerging Diseases and Surveillance (IMED 2016 are described in this article. Physicians, public health practitioners, veterinarians, IT professionals, engineers, and entrepreneurs came together for 2 days to develop solutions at the intersection of emerging infectious diseases and climate change. Projects that resulted from the IMED 2016 Hackathon included environmental impact assessment software for humanitarian organization relief efforts; enhanced communication tools to prevent disease outbreaks; a participatory mobile application to speed the elimination of rabies in Indonesia; integrated disease surveillance platforms; and an improved search function for infectious disease outbreak reports in the ProMED-mail network. Keywords: Hackathon, Innovation, Infectious diseases, Public health, Medical meeting, Interdisciplinary, Emerging infectious diseases

  20. An Innovative Approach for Gob-Side Entry Retaining in Thick Coal Seam Longwall Mining

    Manchao He

    2017-11-01

    Full Text Available Gob-side entry retaining (GER is a popular non-pillar mining technique regarding how to reserve a gateroad for the use of next panel mining. When used in thick coal seams, the conventional entry retaining method requires a huge amount of filling materials and may cause entry (gateroad accidents. Thus, an innovative non-pillar longwall mining approach is introduced. First, structural and mechanical models were built to explore the mechanism of the new approach. The modeling results indicate that effective bulking of the gob roof and reasonable support of the entry roof were key governing factors in improving entry stabilities and reducing roof deformations. Accordingly, a directional roof fracturing technique was proposed to contribute to gob roof caving, and a constant resistance and large deformation anchor (CRLDA cable was used to stabilize the entry roof. Subsequently, the evolutionary laws of the roof structure and stresses were explored using numerical simulation. It was found that the structure of the surrounding rocks around the retained entry changed significantly after roof fracturing. The stress-bearing center was transferred to the gob area, and the entry roof was in a low stress environment after adopting the approach. Finally, the approach was tested on a thick coal seam longwall mining panel. Field monitoring indicates that the retained entry was in a stable state and the index of the retained entry met the requirement of the next mining panel. This work provides an effective and economical approach to non-pillar longwall mining in thick coal seams.

  1. Proceedings of the US-Japan workshop and the satellite meeting of ITC-9 on physics of high beta plasma confinement in innovative fusion system

    Goto, Seiichi; Yoshimura, Satoru

    1999-04-01

    The US-Japan Workshop on Physics of High Beta Plasma Confinement in Innovative Fusion System was held jointly with the Satellite Meeting of ITC-9 at National Institute for Fusion Science (NIFS), Toki-city during December 14-15, 1998. This proceedings book includes the papers of the talks given at the workshop. These include: Theoretical analysis on the stability of field reversed configuration (FRC) plasmas; Theory and Modeling of high β plasmas; Recent progressive experiments in high β systems; Formation of high β plasmas using merging phenomenon; Theory and Modeling of a FRC Fusion Reactor. The 15 papers are indexed individually. (J.P.N.)

  2. Proceedings of the US-Japan workshop and the satellite meeting of ITC-9 on physics of high beta plasma confinement in innovative fusion system

    Goto, Seiichi; Yoshimura, Satoru [eds.

    1999-04-01

    The US-Japan Workshop on Physics of High Beta Plasma Confinement in Innovative Fusion System was held jointly with the Satellite Meeting of ITC-9 at National Institute for Fusion Science (NIFS), Toki-city during December 14-15, 1998. This proceedings book includes the papers of the talks given at the workshop. These include: Theoretical analysis on the stability of field reversed configuration (FRC) plasmas; Theory and Modeling of high {beta} plasmas; Recent progressive experiments in high {beta} systems; Formation of high {beta} plasmas using merging phenomenon; Theory and Modeling of a FRC Fusion Reactor. The 15 papers are indexed individually. (J.P.N.)

  3. NASA's Public Participation Universe: Why and How the U.S. Space Agency Is Democratizing Its Approaches to Innovation

    Kaminski, Amy; Buquo, Lynn; Roman, Monsi; Beck, Beth; Thaller, Michelle

    2016-01-01

    This paper analyzes NASA's increasing effort to invite greater public participation in its techno scientific work through open innovation methodologies. First we examine why NASA has expanded its use of these approaches, noting the roles of an intertwined set of forcing functions including budget constraints, the availability of technological resources, and committed individuals. Next we outline the strategies the agency has invoked to engage the public in research, technology development, and other activities to advance and shape NASA's mission. As we show, promoting greater public involvement has entailed facilitating the NASA workforce's familiarity with open innovation approaches as well as developing projects and creating outreach strategies appropriate to the envisioned participant base. We then discuss the wide variety of outcomes NASA's open innovation initiatives have yielded in support of NASA research and development objectives as well as benefits to participants and others. We conclude with a discussion of the remaining barriers to the use of open innovation techniques as a standard practice and the strategies in work to overcome those barriers so the full potential of a democratized approach to innovation can be realized.

  4. Nurses and nurse assistants' experiences with using a design thinking approach to innovation in a nursing home.

    Eines, Trude Fløystad; Vatne, Solfrid

    2018-05-01

    The aim of this study was to evaluate nurses' and nurse assistants' experiences with a design thinking approach to innovation used in a nursing home in Norway. A design thinking approach to innovation that focuses on users' needs can be employed to address many of the challenges facing health care providers in a field facing a growing ageing population, complex diseases and financial shortfalls. This study is based on a thematic analysis of four focus group interviews with nurses and nurse assistants (n = 23). In the initial phase of developing the new service model, which included defining staff roles and responsibilities, participating nurses and nurse assistants felt engaged and motivated by the designers' inclusive and creative methods. However, during the new model's testing phase, they were critical of management's lack of involvement in the model`s implementation and therefore became less motivated about the project. The findings of the study highlight the importance of the designers cooperating with management and staff for the duration of the innovation process. Challenging innovation processes require strong managers who engage with designers, patients, staff and volunteers throughout all phases of an innovation process using a design thinking approach. © 2017 John Wiley & Sons Ltd.

  5. Nexus: Where science meets society [In an age of discovery and innovation, how can benefits be passed along?

    Jackson, S.A.

    2007-01-01

    Science and scientists play a vital role in society. The degree of influence wielded by scientific opinion, the reputation of scientific bodies for impartially rendered insight, the priority accorded to scientific research and education all have contributed to the success of nations. The frontiers of science have never looked more promising than they do today. Opportunities abound. From nanotechnology, to bioengineering, to terahertz imaging, to string theory, to space science, we are in an Age of Discovery and Innovation. The challenge is how to mine these opportunities for all they are worth to impact human health and welfare and security, and to have greater public understanding of, and respect and appreciation for, science. If we continue to invest in science and engineering research across a range of disciplines, develop human capital, engage on key public policy issues pro-actively and consistently, and engage the public in new, creative and respectful ways,we can heal rifts and address rising expectations worldwide.Terrorism and national security are top-of-the-mind issues in the US, and of concern worldwide. There are various technologies being used to identify and track potential terrorists. The public, especially in the US, has a general feeling of unease, while some worry about the effect of security measures on civil liberties, and others worry about the scientific community itself on the ease of communication and interaction with scientists worldwide for the advance of science. What is not clear is how comprehensively current vulnerabilities are assessed. This is where the scientific community can play a much needed role, and can contribute to a more open discussion, not of terrorist targets, or specifically how risk assessment is used, but at least that it is used. We cannot protect against everything. But, we can use risk assessment to deploy resources in an efficacious way, to track the right things, to aggravate people less, and to calm unnecessary

  6. Innovation in dental education: The "On-the-Fly" approach to simultaneous development, implementation and evidence collection.

    de Boer, I R; Bakker, D R; Serrano, C M; Koopman, P; Wesselink, P R; Vervoorn, J M

    2018-03-01

    This study outlines an approach for education innovation and addresses the ambivalence between evidence-based and non-evidence-based conditions. The "on-the-fly" approach was described as involving implementation during the development of an innovation for dental education. The process of designing and implementing cutting-edge technology of the MOOG Simodont Dental Trainer (DT) whilst systematically collecting evidence illustrates the "on-the-fly" approach. Using the "on-the-fly" approach for developing, implementing and collecting evidence simultaneously in an academic environment appears feasible in serving both the professionals, users and developers and system designers. During the implementation of the new technology, growing evidence stepwise strengthened its position; therefore, showing stakeholders that evidence was used to improve the technology seemed to support and increase acceptance of the new technology. When pioneering an innovative technology in a specialty field, the development stage often precedes evidence for its effectiveness. Consciously choosing the "on-the-fly" approach clarifies to stakeholders in advance about the lack of evidence in an innovation and the need of their support to collect such evidence for improvement and in order to facilitate implementation. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Innovative approaches to cervical cancer screening for sex trade workers: an international scoping review.

    Thulien, Naomi S

    2014-03-01

    Female sex trade workers are among those at highest risk for developing and dying of cervical cancer, and yet many-particularly the most marginalized-are less likely than other women to be screened. This review summarizes global findings on innovative approaches to cervical cancer screening for female sex trade workers, highlights current gaps in the delivery of cervical cancer screening for female sex trade workers globally, and suggests areas for future research and policy development. A scoping review of peer-reviewed publications and grey literature was conducted. Medline (OVID), PubMed, EMBASE, and SCOPUS were searched for relevant studies written in English. There were no limitations placed on dates. Grey literature was identified by hand searching and through discussion with health care providers and community outreach workers currently working with sex trade workers. Twenty-five articles were deemed suitable for review. Articles detailing innovative ways for female sex trade workers to access cervical cancer screening were included. Articles about screening for sexually transmitted infections were also included if the findings could be generalized to screening for cervical cancer. Articles limited to exploring risk factors, knowledge, awareness, education, prevalence, and incidence of cervical cancer among sex trade workers were excluded from the review. Successful screening initiatives identified in the studies reviewed had unconventional hours of operation, understood the difference between street-based and venue-based sex trade workers, and/or used peers for outreach. Two significant gaps in health care service delivery were highlighted in this review: the limited use of unorthodox hours and the nearly exclusive practice of providing sexually transmitted infection screening for female sex trade workers without cervical cancer screening. In addition, although street-based (as opposed to venue-based) sex trade workers are likely at higher risk for

  8. An integrated approach to telemonitoring noncommunicable diseases: best practice from the European innovation partnership on active and healthy ageing.

    Bourret, Rodolphe; Bousquet, Jean

    2013-01-01

    The European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) has prioritized noncommunicable diseases (NCDs). An innovative integrated health system built around medical systems and strategic partnerships is proposed to combat NCDs. Information and communication technology (ICT) is needed for the implementation of integrated care in a medical systems approach. The Teaching Hospital of Montpellier has set up the clinic and uses IP-Soins as an ICT tool. Patients with NCDs will be referred to the chronic disease clinic of the hospital by a primary care physician. This paper reviews the complexity of NCDs intertwined with ageing. It gives an overview of the problem. It presents an innovative approach in the implementation of a clinical information system in a "SaaS" (Software as a Service) mode.

  9. Improving the efficiency of quantitative (1)H NMR: an innovative external standard-internal reference approach.

    Huang, Yande; Su, Bao-Ning; Ye, Qingmei; Palaniswamy, Venkatapuram A; Bolgar, Mark S; Raglione, Thomas V

    2014-01-01

    The classical internal standard quantitative NMR (qNMR) method determines the purity of an analyte by the determination of a solution containing the analyte and a standard. Therefore, the standard must meet the requirements of chemical compatibility and lack of resonance interference with the analyte as well as a known purity. The identification of such a standard can be time consuming and must be repeated for each analyte. In contrast, the external standard qNMR method utilizes a standard with a known purity to calibrate the NMR instrument. The external standard and the analyte are measured separately, thereby eliminating the matter of chemical compatibility and resonance interference between the standard and the analyte. However, the instrumental factors, including the quality of NMR tubes, must be kept the same. Any deviations will compromise the accuracy of the results. An innovative qNMR method reported herein utilizes an internal reference substance along with an external standard to assume the role of the standard used in the traditional internal standard qNMR method. In this new method, the internal reference substance must only be chemically compatible and be free of resonance-interference with the analyte or external standard whereas the external standard must only be of a known purity. The exact purity or concentration of the internal reference substance is not required as long as the same quantity is added to the external standard and the analyte. The new method reduces the burden of searching for an appropriate standard for each analyte significantly. Therefore the efficiency of the qNMR purity assay increases while the precision of the internal standard method is retained. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Innovation in healthcare services – creating a Combined Contingency Theory and Ecosystems Approach

    Engelseth, Per; Kritchanchai, Duangpun

    2018-04-01

    The purpose of this conceptual paper is to develop an analytical framework used for process development in healthcare services. Healthcare services imply a form of operations management demanding an adapted research approach. This study therefore highlights first in the introduction challenges of healthcare services as a reasoning of this study. It is a type of service that has high societal and therefore ethical concern, but at the same time needs to be carried out efficiently to economise service production resource use. Combined business and ethics concerns need to be balanced in this service supply system. In the literature review that is the bulk of this paper, first, particularities of the service industry processes are considered. This is followed by considering literature on contingency theory to consider the nature of the supply chain context of the healthcare service processes highlighting interdependencies and appropriate technology use. This developed view is then expanded to consider an ecosystems approach to encompass the environment expanding analyses to considering in balanced manner features of business, society and nature. A research model for directing both further researches on the healthcare service industry an innovation of such services in practice is introduced.

  11. Next-generation systematics: An innovative approach to resolve the structure of complex prokaryotic taxa

    Sangal, Vartul; Goodfellow, Michael; Jones, Amanda L.; Schwalbe, Edward C.; Blom, Jochen; Hoskisson, Paul A.; Sutcliffe, Iain C.

    2016-12-01

    Prokaryotic systematics provides the fundamental framework for microbiological research but remains a discipline that relies on a labour- and time-intensive polyphasic taxonomic approach, including DNA-DNA hybridization, variation in 16S rRNA gene sequence and phenotypic characteristics. These techniques suffer from poor resolution in distinguishing between closely related species and often result in misclassification and misidentification of strains. Moreover, guidelines are unclear for the delineation of bacterial genera. Here, we have applied an innovative phylogenetic and taxogenomic approach to a heterogeneous actinobacterial taxon, Rhodococcus, to identify boundaries for intrageneric and supraspecific classification. Seven species-groups were identified within the genus Rhodococcus that are as distantly related to one another as they are to representatives of other mycolic acid containing actinobacteria and can thus be equated with the rank of genus. It was also evident that strains assigned to rhodococcal species-groups are underspeciated with many misclassified using conventional taxonomic criteria. The phylogenetic and taxogenomic methods used in this study provide data of theoretical value for the circumscription of generic and species boundaries and are also of practical significance as they provide a robust basis for the classification and identification of rhodococci of agricultural, industrial and medical/veterinary significance.

  12. Reducing unidentified MOV failures: An innovative approach to thermal overload monitoring

    Hill, K.; Watson, M.E.; Ali, H.S.; Schlesinger, R.

    1991-01-01

    Historically the failure of motor-operated valves to actuate on demand has caused plant transients, reduced safety system reliability, and lost plant availability. The typical control and indication circuit design uses thermal overload contacts in the control circuit only. This has been recognized as a significant unidentified valve failure mode that may prevent the valve from performing its safety function when required. Different approaches have been evaluated to alert operations personnel to this thermal overload condition, but no cost-effective solution has provided indication of the thermal overload while maintaining valve position indication. Iowa Electric Light and Power Company's Duane Arnold Energy Center (DAEC) is utilizing a nuclear-qualified thermal overload monitor in valve control and indication circuits. This innovative approach has proven economical as no new cabling or indicating devices are required. Indication is provided using existing valve position indicating lights. The monitor is engineered to provide indication of a thermal overload trip as well as continuous indication of valve position, consistent with Regulatory Guide 1.97 and guidance provided by Generic Letter 89-10

  13. Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

    1996-01-01

    The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs

  14. Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

    NONE

    1996-01-01

    The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs.

  15. Relationships between vocational training centres and industrial SMEs in the Basque Country: A Regional Innovation System approach

    Eneka Albizu

    2011-11-01

    Full Text Available Purpose: The aim of this document is to analyse the reach of the relation between vocational training (VT centres and industrial SMEs in the Basque Country (Spain, and its influence on innovation processes developed by companies.Design/methodology/approach: We employ the conceptual framework offered by the Regional Innovation System (RIS perspective and the information supplied, on the one hand, by relevant actors within the vocational training system, through in-depth interviews, and, on the other, by the response of industrial SMEs to a survey.Findings: The results obtained suggest that vocational training centres are an agent of significance within the RIS, contributing through its main lines of action (formal education, continuous training and company services to improving the competitiveness of companies and to stimulating their innovation processes.Research limitations: Although this paper has described the nature of the main mechanisms of relation between VT centres and industrial SMEs, there is a need for ongoing research to analyse the contribution of the educational system to innovation processes in industrial SMEs. For this purpose it would be interesting to measure how the skills of qualified workers and technicians coming from the VT system mesh with company innovation processes.Originality/value: The results of this study highlight a positive relationship between vocational training and innovation.

  16. CONCEPTUAL APPROACHES TO STUDY THE INNOVATIVE DEVELOPMENT OF REGIONAL SOCIO-ECONOMIC SYSTEMS

    Svitlana Fedulova

    2017-12-01

    Full Text Available The purpose of the paper is to find out and identify conceptual approaches to the study of the innovative development of regional socio-economic systems to take into account global requirements for global water security. Methodology. We used in our study traditional and special methods, including: historical and logical method, abstraction and analogy, and system analysis methods. Results. The article deals with the problems of innovative development of regional socio-economic systems. Conceptual approaches to the study of the innovative development of these systems are determined. Theoretical approaches to regionalization are generalized and the regional typology in world regionalism is presented. The study devotes a sufficient attention to the issues of infrastructure support for regional systems, which is a prerequisite for the functioning and development of such systems. The article focuses on the priority of research of such a component of regional infrastructure as engineering and technical infrastructure. The model of regulation of development of regional socio-economic systems on the basis of infrastructure support with the consideration of world requirements of global water security is offered. Practical implications. In recent times, the discussion on the definition of the essence of the concept of “region” is rather lively. The new paradigm of the regional economy represents the region as a variety of spatial systems of various scales. Yes, there are ongoing discussions that under the region can be understood as a group of states and small-sized administrative-territorial units. Despite the important role played by such regional systems in the economy of many countries, this topic in domestic studies is not given with enough attention. Also, in the domestic scientific schools of the regional economy, studies devoted to the problems of patterns and tendencies of the formation and development of regional systems of Ukraine, the

  17. Proceedings: 1996 EPRI conference on innovative approaches to electricity pricing: Managing the transition to market-based pricing

    1996-03-01

    This report presents the proceedings from the EPRI conference on innovative approaches to electricity pricing. Topics discussed include: power transmission pricing; retail pricing; price risk management; new pricing paradigms; changes from cost-based to a market-based pricing scheme; ancillary services; retail market strategies; profitability; unbundling; and value added services. This is the leading abstract. Papers are processed separately for the databases

  18. Actual versus Implied Physics Students: How Students from Traditional Physics Classrooms Related to an Innovative Approach to Quantum Physics

    Bøe, Maria Vetleseter; Henriksen, Ellen Karoline; Angell, Carl

    2018-01-01

    Calls for renewal of physics education include more varied learning activities and increased focus on qualitative understanding and history and philosophy of science (HPS) aspects. We have studied an innovative approach implementing such features in quantum physics in traditional upper secondary physics classrooms in Norway. Data consists of 11…

  19. Diffusion of innovation: a social network and organizational learning approach to governance of a districtwide leadership team

    Yi-Hwa Liou

    2016-04-01

    Full Text Available District and school leaders play particularly important roles in leading districtwide improvement, as they are increasingly held accountable for bringing about change and improvement for educational innovation and excellence.  While conventional districtwide governance places much of its focus on technical and administrative matters such as policy development, supervision, and monitoring progress. This technical focus often overlooks the fundamental aspect that drives the progress of improvement—the social infrastructure shaped by interpersonal relationship. Responding to recent scholarships that calls for a networked approach to governance, this study examined the change effort of a districtwide leadership team over three points in time drawing on social network theory and analysis focused on district governance.  Specifically, we focused on the type of interpersonal relationship in which leaders engaged with each other in sharing and exchanging innovative ideas as these efforts may support better governance. Additionally, we explored organizational learning as a way to examine climate in support of districtwide innovative efforts during change process. Our findings from leaders indicated increased innovative behaviors and perceived climate on organizational learning over time. The findings suggested that leaders increased connections around risk taking, regardless of their work level over time. This increased connectedness around innovation was coupled with an increase in leaders’ perception of the district’s learning climate, suggesting a cohesive approach to governance and improvement.

  20. Towards controlled innovation of complex objects.: A sociotechnical approach to describing ship design

    van Bruinessen, T.M.

    2016-01-01

    Within the ship design industry, and in particular in the development of large, complex and innovative vessels experienced ship designers play an important role in organizing and structuring the design process. How this actually happens within projects that develop such large, complex and innovative vessels for a single client is not clear. This observation lead to a broad, initial research question as the starting point for further research. How are innovative, large and complex vessels deve...

  1. An innovative computationally efficient hydromechanical coupling approach for fault reactivation in geological subsurface utilization

    Adams, M.; Kempka, T.; Chabab, E.; Ziegler, M.

    2018-02-01

    Estimating the efficiency and sustainability of geological subsurface utilization, i.e., Carbon Capture and Storage (CCS) requires an integrated risk assessment approach, considering the occurring coupled processes, beside others, the potential reactivation of existing faults. In this context, hydraulic and mechanical parameter uncertainties as well as different injection rates have to be considered and quantified to elaborate reliable environmental impact assessments. Consequently, the required sensitivity analyses consume significant computational time due to the high number of realizations that have to be carried out. Due to the high computational costs of two-way coupled simulations in large-scale 3D multiphase fluid flow systems, these are not applicable for the purpose of uncertainty and risk assessments. Hence, an innovative semi-analytical hydromechanical coupling approach for hydraulic fault reactivation will be introduced. This approach determines the void ratio evolution in representative fault elements using one preliminary base simulation, considering one model geometry and one set of hydromechanical parameters. The void ratio development is then approximated and related to one reference pressure at the base of the fault. The parametrization of the resulting functions is then directly implemented into a multiphase fluid flow simulator to carry out the semi-analytical coupling for the simulation of hydromechanical processes. Hereby, the iterative parameter exchange between the multiphase and mechanical simulators is omitted, since the update of porosity and permeability is controlled by one reference pore pressure at the fault base. The suggested procedure is capable to reduce the computational time required by coupled hydromechanical simulations of a multitude of injection rates by a factor of up to 15.

  2. ANALYTICAL VIEW OF THE PERCEPTION OF SELECTED INNOVATIVE APPROACHES IN MARKETING COMMUNICATIONS

    Peter Dorčák

    2015-07-01

    Full Text Available Purpose: The purpose of this paper is to present by means of thorough analysis of the selected market the perception of innovative approaches in marketing communication, both from the perspective of the companies on the supply side and from the perspective of their potential customers on the demand side. As regards the companies, it is in particular about their perception of relative benefits the use of electronic marketing instruments has given the degree of effort and resources spent on the establishment and maintenance of e-marketing infrastructure. As regards the customers, it is, in turn, about their perception of the particular aspects of use of virtual social networks by the companies for branding purposes or directly for promotion.Methodology/Approach: Object of the research were real companies active on the analysed market. The subject of the research were their actual and potential customers represented by the users of one of the local Internet portals long active on the analysed market. Both these groups were presented with questions by means of electronic questionnaires. The data were subsequently processed and interpreted through cluster analyses.Findings: Based on the confirmed aspects we came to the conclusion that perceived benefit of the Internet on business is closely related to on-line activity of the companies and to the number of instruments the company uses to promote its business. Last but not least, we have investigated whether economic status of the users (real or potential customers has an impact on their perception of the companies' use of social networks for promotional purposes. The similarity of behaviour of particular groups allows for more accurate targeting of on-line activity with respect to selected target markets.Research Limitation/implication: The biggest limitation is the territorial nature of the research. Research was targeted primarily at the Central European market.Originality/Value of paper: Presented

  3. Two approaches to meeting the economic challenge for advanced BWR designs

    Rao, A.S.; Sawyer, C.D.

    1997-01-01

    This paper presents the design overview and approach to addressing the aforementioned economic challenges for two Advanced BWR designs. The first plant is the ABWR and the second is the ESBWR. The ABWR relies on proven technology and components and an extensive infrastructure that has been built up over the last 20 years. Because it has proven and standards safety systems it has very limited uncertainty regarding licensing. Finally, it relies on the economies of scale and overall design flexibility to improve the overall economics of power generation. The ESBWR on the other hand has taken an innovative approach to reduce systems and components to simplify the overall plant to improve plant economics. The overall plant design is indeed simpler, but improved economics required reliance on some economies of scale also. This design embodied in the ESBWR, also has minimized the overall development cost by utilizing features and components from the ABWR and SBWR technology programs

  4. Meeting the nation's environmental restoration and waste management challenges through the accelerated development of innovative technologies: A report on the DOIT initiative

    Prestwich, S.; Chee, T.

    1994-01-01

    New environmental technologies are needed to meet the Nation's environmental restoration and waste management challenges. However, in the past environmental technology development and commercialization process has been hampered by the absence of critical intergovernmental linkages and broad public acceptability. If the Nation can create cooperative linkages among levels of government and stakeholders, there is a tremendous opportunity not only to accelerate the pace of site cleanups but also to capture a larger share of the growing international market for remediation and waste management technologies. Recognizing this opportunity not only to accelerate the pace of site cleanups but also to capture a larger share of the growing international market for remediation and waste management technologies. Recognizing this opportunity, western governors and the U.S. Departments of Defense, Interior, Energy, and U.S. Environmental Protection Agency have established a partnership to test ways to expedite the deployment and testing of innovative cleanup technologies. This partnership, which was formalized through the creation of the Federal Advisory Committee to Develop On-Site Innovative Technologies (the DOIT initiative), will soon test models for speeding up the deployment, testing, evaluation, and commercialization of environmental technologies at selected demonstration sites primarily in the western United States. This evaluation process will be pursued in a manner that poses no additional risks to the environment, encourages innovative public participation, and helps ensure financial feasibility, insurability, and eventual commercialization of new technologies

  5. Approaches for the Assessment of the Innovative Nuclear System of Ukraine on the Base of INPRO Methodology

    Afanas'ev, A.A.; Vlasenko, N.I.

    2007-01-01

    Approaches for the preliminary and comparative assessment of Innovative Nuclear System (INS) of Ukraine using INPRO methodology (IAEA TECDOC-1434) suggested for the period up to 2030, which must answer the comprehensive purpose of sustainable development, contribute to strengthening of the non-proliferation principles and solving an energy problems supply on national and regional levels are presented in the paper. Using assessment results of the INS based on evolutionary designs will allow Ukraine to build informative, methodological and technical basis for choice of the INS based on innovative design which could be offered for deployment in Ukraine after 1030

  6. Innovative Approaches to Building Comprehensive Talent Pipelines: Helping to Grow a Strong and Diverse Professional Workforce

    R. Cherinka

    2015-10-01

    Full Text Available The world today is constantly changing requiring organizations to adapt quickly and seek expertise to help meet the demands on their business. There are many workforce challenges that organizations seek to overcome, and one of the hardest things to do in modern corporations is to keep the talent pool young and vibrant. Early career hires tend to bring new and exciting ideas into play that may not even be considered by their more seasoned peers. The challenge with early career hires, especially in the Science, Technology, Engineeringand Math (STEM career fields, is the extreme difficulty in finding candidates who, not only have book knowledge, but also have hands-on, real world experience. Statistics show that this is a real concern to professional workforce employers. In this presentation, we highlight a model aimed at adopting new approaches for seeking and evaluating high quality candidates for on-boarding, conducting interviews and hiring to build a corporate talent pipeline. We discuss the model as it relates to recruiting, training, competition-based interviewing and providing hands-on work experience toward helping to build strong professionals in an organization. We conclude by highlighting several examples of successful approaches and their outcomes.

  7. Allogeneic mesenchymal precursor cells (MPCs): an innovative approach to treating advanced heart failure.

    Westerdahl, Daniel E; Chang, David H; Hamilton, Michele A; Nakamura, Mamoo; Henry, Timothy D

    2016-09-01

    Over 37 million people worldwide are living with Heart Failure (HF). Advancements in medical therapy have improved mortality primarily by slowing the progression of left ventricular dysfunction and debilitating symptoms. Ultimately, heart transplantation, durable mechanical circulatory support (MCS), or palliative care are the only options for patients with end-stage HF. Regenerative therapies offer an innovative approach, focused on reversing myocardial dysfunction and restoring healthy myocardial tissue. Initial clinical trials using autologous (self-donated) bone marrow mononuclear cells (BMMCs) demonstrated excellent safety, but only modest efficacy. Challenges with autologous stem cells include reduced quality and efficacy with increased patient age. The use of allogeneic mesenchymal precursor cells (MPCs) offers an "off the shelf" therapy, with consistent potency and less variability than autologous cells. Preclinical and initial clinical trials with allogeneic MPCs have been encouraging, providing the support for a large ongoing Phase III trial-DREAM-HF. We provide a comprehensive review of preclinical and clinical data supporting MPCs as a therapeutic option for HF patients. The current data suggest allogeneic MPCs are a promising therapy for HF patients. The results of DREAM-HF will determine whether allogeneic MPCs can decrease major adverse clinical events (MACE) in advanced HF patients.

  8. Three-Dimensional Visualisation as an Innovation Approach to Forecasting the City Budget Income

    Markuts Yuliya I.

    2013-11-01

    Full Text Available Forecasting city budget income is a very important instrument of the budget management through which it is possible to assume the future financial influence of the current budget policy and economic tendencies for achievement of long-term plans and identify alternative ways of solution of existing problems. The goal of the article is development of a model for complex system analysis, economic assessment of execution and forecasting income of the budget of the city of Donetsk with the aim to make high quality, timely and efficient managerial decisions with respect to the budget on the basis of an innovation approach, which is a combination of methods of interpolation, imitation and three-dimensional visualisation. The result of the study is diagnostics of narrow places in execution of the city budget for the studied period of 2008 – 2012, detection of interconnected budget income items, identification of existing tendencies of execution of the budget income and forecasting the income part of the city budget for the period of 2013 – 2017.

  9. i Engaging as an innovative approach to engage patients in their own fall prevention care

    Tzeng HM

    2014-05-01

    Full Text Available Huey-Ming Tzeng,1 Chang-Yi Yin21College of Nursing, Washington State University, Spokane, WA, USA; 2Department of History, Chinese Culture University, Taipei, TaiwanAbstract: Decreasing patient fall injuries during hospitalization continues to be a ­challenge at the bedside. Empowering patients to become active participants in their own fall ­prevention care could be a solution. In a previous study, elderly patients recently discharged from a United States hospital expressed a need for nurses to give and repeat directives about fall prevention; when the nurse left a brochure on the topic, but did not provide any (or limited verbal explanations about the content or the importance of the information, the patient felt that the information was insufficient. To address patients’ needs, we developed “i ­Engaging”, a Web-based software application for use at the bedside. i Engaging is an innovative approach that is used to engage patients in their own fall prevention care during hospital stays. The application was designed based on the assumption that patients are the best and most critical sources of information about their health status. i Engaging has not yet been tested in clinical trials.Keywords: patient, safety, hospital, nursing care, fall, consumer involvement

  10. Genetic engineering represents a safe approach for innovations improving nutritional contents of major food crops

    Werner Arber

    2017-05-01

    Full Text Available About 70 years ago early microbial genetic research revealed that inherited phenotypic traits become determined by DNA filaments composed of 4 different nucleotides that are linearly arranged. In the meantime we know that genes, the determinants of specific life functions, are genomic segments of an average size of about 1000 nucleotides, i.e. a very small part of a genome. Fundamental insights into the structures and functions of selected genes can be reached by sorting out the relevant short DNA segment, splicing this fragment into a natural gene vector such as a viral genome or a fertility plasmid. This allows the researchers to transfer the genetic hybrid into an appropriate host cell in order to produce many copies that can then serve for functional and structural analysis. This research approach became efficient in the 1970s. On the request of involved researchers, safety guidelines became proposed 1975 at the Asilomar Conference on Recombinant DNA (Berg, Baltimore, Brenner, Roblin, & Singer, 1975, then generally introduced and still largely followed nowadays. Carefully carried out genetic engineering by horizontally transferring a selected and functionally well known DNA segment into the genome of another organism has in many published biosafety investigations never shown any unexpected harmful effect. We will present below selected examples of research contributions enabling innovations for the benefit of human life conditions.

  11. Team teaching as an innovative approach in education at higher education institutions

    Karmen Knežević

    2012-12-01

    Full Text Available In order to achieve maximum motivation and success in teaching students in higher education, it is necessary to use different forms of teaching. The aim of this article is to define the form of team teaching and to identify the advantages and disadvantages of it. For this purpose a team teaching lecture of English and physics was held with eleven students in the fourth semester at the Department of Physics at the University of Josip Juraj Strossmayer in Osijek. During the research and preparation for this team teaching lecture a number of open questions appeared and were answered by the authors / teachers. The results of the team teaching lecture and mutual gained experience (teacher – student show that this innovative approach provides a richer educational environment both for students and for teachers, which increases the efficiency of the teaching process. This form of teaching enabled teachers and students new roles in the educational system, which is a key factor in increasing the competitiveness at colleges, universities and study programs. However, a successful implementation of team teaching requires common elements of the team members that need to be aligned with the curriculum and other participants in the educational process.

  12. Thin-dielectric-layer engineering for 3D nanostructure integration using an innovative planarization approach

    Guerfi, Y; Doucet, J B; Larrieu, G

    2015-01-01

    Three-dimensional (3D) nanostructures are emerging as promising building blocks for a large spectrum of applications. One critical issue in integration regards mastering the thin, flat, and chemically stable insulating layer that must be implemented on the nanostructure network in order to build striking nano-architectures. In this letter, we report an innovative method for nanoscale planarization on 3D nanostructures by using hydrogen silesquioxane as a spin-on-glass (SOG) dielectric material. To decouple the thickness of the final layer from the height of the nanostructure, we propose to embed the nanowire network in the insulator layer by exploiting the planarizing properties of the SOG approach. To achieve the desired dielectric thickness, the structure is chemically etched back with a highly diluted solution to control the etch rate precisely. The roughness of the top surface was less than 2 nm. There were no surface defects and the planarity was excellent, even in the vicinity of the nanowires. This newly developed process was used to realize a multilevel stack architecture with sub-deca-nanometer-range layer thickness. (paper)

  13. The future of viral hepatitis testing: innovations in testing technologies and approaches.

    Peeling, Rosanna W; Boeras, Debrah I; Marinucci, Francesco; Easterbrook, Philippa

    2017-11-01

    A large burden of undiagnosed hepatitis virus cases remains globally. Despite the 257 million people living with chronic hepatitis B virus infection, and 71 million with chronic viraemic HCV infection, most people with hepatitis remain unaware of their infection. Advances in rapid detection technology have created new opportunities for enhancing access to testing and care, as well as monitoring of treatment. This article examines a range of other technological innovations that can be leveraged to provide more affordable and simplified approaches to testing for HBV and HCV infection and monitoring of treatment response. These include improved access to testing through alternative sampling methods (use of dried blood spots, oral fluids, self-testing) and combination rapid diagnostic tests for detection of HIV, HBV and HCV infection; more affordable options for confirmation of virological infection (HBV DNA and HCV RNA) such as point-of-care molecular assays, HCV core antigen and multi-disease polyvalent molecular platforms that make use of existing centralised laboratory based or decentralised TB and HIV instrumentation for viral hepatitis testing; and finally health system improvements such as integration of laboratory services for procurement and sample transportation and enhanced data connectivity to support quality assurance and supply chain management.

  14. Innovative Approaches for Immune Tolerance to Factor VIII in the Treatment of Hemophilia A

    Sherman, Alexandra; Biswas, Moanaro; Herzog, Roland W.

    2017-01-01

    Hemophilia A (coagulation factor VIII deficiency) is a debilitating genetic disorder that is primarily treated with intravenous replacement therapy. Despite a variety of factor VIII protein formulations available, the risk of developing anti-dug antibodies (“inhibitors”) remains. Overall, 20–30% of patients with severe disease develop inhibitors. Current clinical immune tolerance induction protocols to eliminate inhibitors are not effective in all patients, and there are no prophylactic protocols to prevent the immune response. New experimental therapies, such as gene and cell therapies, show promising results in pre-clinical studies in animal models of hemophilia. Examples include hepatic gene transfer with viral vectors, genetically engineered regulatory T cells (Treg), in vivo Treg induction using immune modulatory drugs, and maternal antigen transfer. Furthermore, an oral tolerance protocol is being developed based on transgenic lettuce plants, which suppressed inhibitor formation in hemophilic mice and dogs. Hopefully, some of these innovative approaches will reduce the risk of and/or more effectively eliminate inhibitor formation in future treatment of hemophilia A. PMID:29225598

  15. Patterns of technological innovation and evolution in the energy sector: A patent-based approach

    Lee, Kyungpyo; Lee, Sungjoo

    2013-01-01

    Given the ever-increasing pace and complexity of technological innovation in the energy sector, monitoring technological changes has become of strategic importance. One of the most common techniques for technology monitoring is patent analysis, which enables the identification of technological trends over time. However, few previous studies have carried out patent analysis in the energy sector. This study aims to explore patterns of innovation and of evolution in energy technologies, particularly focusing on similarities and differences across technologies. For this purpose, we first defined the relevant energy technologies and extracted the associated patent data from the United States Patents and Trademark Office (USPTO) and then adopted six patent indices and developed six patent maps to analyze their innovation characteristics. We then clustered energy technologies with similar characteristics, so defining innovation categories, and analyzed the changes in these characteristics over time to define their evolution categories. As one of the few attempts to investigate the overall trends in the energy sector's innovation and evolution, this study is expected to help develop an in-depth understanding of the energy industry, which will be useful in establishing technology strategies and policy in this rapidly changing sector. - Highlights: • We examined the patterns of innovation and evolution of energy technologies. • Six types of innovation patterns such as “competitive” or “mature” were identified. • Six types of evolution patterns such as “towards closed innovation” were identified. • The patterns of evolution were related to the patterns of innovation

  16. Competency-Based Faculty Development in Community-Engaged Scholarship: A Diffusion of Innovation Approach

    Jordan, Catherine; Doherty, William J.; Jones-Webb, Rhonda; Cook, Nancy; Dubrow, Gail; Mendenhall, Tai J.

    2012-01-01

    The authors utilized interviews, competency surveys, and document review to evaluate the effectiveness of a one-year, cohort-based faculty development pilot program, grounded in diffusion of innovations theory, and aimed at increasing competencies in community engagement and community-engaged scholarship. Five innovator participants designed the…

  17. Creating a market-oriented product innovation process : A contingency approach

    Kok, R.A.W.; Biemans, W.G.

    This study analyzes how and why a firm's change program to create a market-oriented innovation process depends on its environmental, innovational and organizational context. Based on an organizational-learning capabilities framework, the results from a multiple case study indicate how a firm's

  18. Mechanical and structural modules in a nuclear power plant advantages of the innovative approach

    Orlandi, S.; De Angelis, F.; Marconi, M.

    2010-01-01

    The modular layout design of a Nuclear Power Plant like the Westinghouse AP600/AP1000 has been developed basically to gain advantages in erection time schedule as well as in minimizing commissioning and start up test to be performed in the field. It is the first time for a Nuclear Power Plant to have a layout configuration fully designed as structured integrated mechanical Modules; this approach has been studied and implemented also to consider already in design phase decommissioning requirements which are mandatory to be able to perform dismantling at the end of the Plant Operation Life. Nevertheless it is the first time the possibility has been investigated to erect the civil structures as structural prefabricated modules: it means to have developed special composite structures which cannot be considered traditional reinforced concrete structures as well as structural beams frames. An approach like the above promotes impressive advantages in terms of extensive prefabrication in the workshops both for mechanical and structural modules, arranging in the workshops also factory acceptance tests as well as specific pre-acceptance commissioning activities. It means also that specific requirements have to be implemented in order to promote the implementation of this technology. Construction and adjustments flexibility in the field during NPP erection is heavily decreased due to modular prefabricated assemblies as well as it is mandatory to complete all the lay out plant design before entering the prefabrication phase in the workshops. Also structural design codes have to be qualified or properly readjusted to manage structural problems in composite structural frames which are innovative for organization, structural behaviour and which have different working ways starting from prefabrication, transportation, lifting up to the installation in the field and concrete pouring. (authors)

  19. Using the social entrepreneurship approach to generate innovative and sustainable malaria diagnosis interventions in Tanzania: a case study.

    Allen, Lisa K; Hetherington, Erin; Manyama, Mange; Hatfield, Jennifer M; van Marle, Guido

    2010-02-03

    There have been a number of interventions to date aimed at improving malaria diagnostic accuracy in sub-Saharan Africa. Yet, limited success is often reported for a number of reasons, especially in rural settings. This paper seeks to provide a framework for applied research aimed to improve malaria diagnosis using a combination of the established methods, participatory action research and social entrepreneurship. This case study introduces the idea of using the social entrepreneurship approach (SEA) to create innovative and sustainable applied health research outcomes. The following key elements define the SEA: (1) identifying a locally relevant research topic and plan, (2) recognizing the importance of international multi-disciplinary teams and the incorporation of local knowledge, (3) engaging in a process of continuous innovation, adaptation and learning, (4) remaining motivated and determined to achieve sustainable long-term research outcomes and, (5) sharing and transferring ownership of the project with the international and local partner. The SEA approach has a strong emphasis on innovation lead by local stakeholders. In this case, innovation resulted in a unique holistic research program aimed at understanding patient, laboratory and physician influences on accurate diagnosis of malaria. An evaluation of milestones for each SEA element revealed that the success of one element is intricately related to the success of other elements. The SEA will provide an additional framework for researchers and local stakeholders that promotes innovation and adaptability. This approach will facilitate the development of new ideas, strategies and approaches to understand how health issues, such as malaria, affect vulnerable communities.

  20. Using the social entrepreneurship approach to generate innovative and sustainable malaria diagnosis interventions in Tanzania: a case study

    Hatfield Jennifer M

    2010-02-01

    Full Text Available Abstract Background There have been a number of interventions to date aimed at improving malaria diagnostic accuracy in sub-Saharan Africa. Yet, limited success is often reported for a number of reasons, especially in rural settings. This paper seeks to provide a framework for applied research aimed to improve malaria diagnosis using a combination of the established methods, participatory action research and social entrepreneurship. Methods This case study introduces the idea of using the social entrepreneurship approach (SEA to create innovative and sustainable applied health research outcomes. The following key elements define the SEA: (1 identifying a locally relevant research topic and plan, (2 recognizing the importance of international multi-disciplinary teams and the incorporation of local knowledge, (3 engaging in a process of continuous innovation, adaptation and learning, (4 remaining motivated and determined to achieve sustainable long-term research outcomes and, (5 sharing and transferring ownership of the project with the international and local partner. Evaluation The SEA approach has a strong emphasis on innovation lead by local stakeholders. In this case, innovation resulted in a unique holistic research program aimed at understanding patient, laboratory and physician influences on accurate diagnosis of malaria. An evaluation of milestones for each SEA element revealed that the success of one element is intricately related to the success of other elements. Conclusions The SEA will provide an additional framework for researchers and local stakeholders that promotes innovation and adaptability. This approach will facilitate the development of new ideas, strategies and approaches to understand how health issues, such as malaria, affect vulnerable communities.

  1. Using the social entrepreneurship approach to generate innovative and sustainable malaria diagnosis interventions in Tanzania: a case study

    2010-01-01

    Background There have been a number of interventions to date aimed at improving malaria diagnostic accuracy in sub-Saharan Africa. Yet, limited success is often reported for a number of reasons, especially in rural settings. This paper seeks to provide a framework for applied research aimed to improve malaria diagnosis using a combination of the established methods, participatory action research and social entrepreneurship. Methods This case study introduces the idea of using the social entrepreneurship approach (SEA) to create innovative and sustainable applied health research outcomes. The following key elements define the SEA: (1) identifying a locally relevant research topic and plan, (2) recognizing the importance of international multi-disciplinary teams and the incorporation of local knowledge, (3) engaging in a process of continuous innovation, adaptation and learning, (4) remaining motivated and determined to achieve sustainable long-term research outcomes and, (5) sharing and transferring ownership of the project with the international and local partner. Evaluation The SEA approach has a strong emphasis on innovation lead by local stakeholders. In this case, innovation resulted in a unique holistic research program aimed at understanding patient, laboratory and physician influences on accurate diagnosis of malaria. An evaluation of milestones for each SEA element revealed that the success of one element is intricately related to the success of other elements. Conclusions The SEA will provide an additional framework for researchers and local stakeholders that promotes innovation and adaptability. This approach will facilitate the development of new ideas, strategies and approaches to understand how health issues, such as malaria, affect vulnerable communities. PMID:20128922

  2. 47{sup th} Annual meeting on nuclear technology (AMNT 2016). Key topic / Outstanding know-how and sustainable innovations

    Zwermann, Winfried [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Forschungszentrum

    2016-11-15

    Summary report on the Key Topic ''Outstanding Know-How and Sustainable Innovations'' Technical Session ''Reactor Physics, Thermo, and Fluid Dynamics'' of the 47th Annual Conference on Nuclear Technology (AMNT 2016) held in Hamburg, 10 to 12 May 2016. Other Sessions of AMNT 2016 have been and will be covered in further issues of atw.

  3. An Innovative Approach to the Integrated Management System Development: SIMPRO-IMS Web Based Environment

    Kristina Zgodavova

    2012-12-01

    Full Text Available The purpose of this paper is to contribute to learning, knowledge creation and knowledge transfer for building organization innovability by integrating the management systems in the SIMPRO-IMS web based environment. The paper content consists of the interpretation of role-play simulation, role-play simulation process description, methodology, and the employment of role-play simulation outcomes, as well as the discussion of the knowledge thus obtained. Primary the model of the SIMPRO-Q education environment has been developed and tested during a period of 15 years in several industrial organizations as well as service organizations such as Higher Education Institution (HEI and Healthcare Organization (HCO. The newest version SIMPRO-IMS has recently been developed to support a need of integration of management systems and information archiving. With the last development, SIMPRO-IMS web based environment, processes of five ISO systems are integrated for parallel development, implementation, auditing, maintaining and leading. SIMPRO-IMS provides management with the apparatus necessary to realize a systematic and verifiable approach to the creation and control of IMS documentation. At the same time contributes to the preservation of organization memory in response to the growing challenges of globalization and digitalization. The research is limited by the complexity of a real system and possible empiric results verification. The results achieved are verified when people really overcome the resistance to change. This can be assessed thoughtfully only after some period of time. Another limitation is presented by measurability of real enhancement achieved in quality, safety and environmentality of production, and business continuity and social responsibility of an organization. Development and progress in the methodology of SIMPRO-IMS web based environment is encoded in upgrading the SIMPRO database by processes of the environmental management

  4. Agri‐environmental Policies to Meet Consumer Preferences in Japan: An Economic‐Biophysical Model Approach

    Tetsuya Uetake

    2014-08-01

    Full Text Available Promoting environmentally friendly farming products is crucial to meeting consumer demand. Although governments implement policy measures to improve the environmental performance of the agriculture sector, theirimpacts are difficult to assess. This study analyses the performance of agri‐environmental policies in Japan, by using the OECD’s policy impact model and reference level framework. In particular, it identifies the environmental impacts of three simulated agri‐environmental policies based on farms’ characteristics. The results suggest that a policy mix of regulation and an incentive payment would reduce environmental impacts, suggesting that targeted approaches could improve the cost‐effectiveness of agri‐environmental policies.

  5. Continuous Innovation and Business Development in High-tech SME Clusters: A Change Point Analysis and Assessment Approach

    Müller, Sabine; Neergaard, Helle; Ulhøi, John Parm

    The aim of this paper is to  propose an integrated methodological approach to study  complex  and  longitudinal  processes  such  as  continuous  innovation  and business development in high-tech SME clusters. It draws from four existing and  well-recognised approaches for studying events...... is especially helpful for studies which focus on continuous innovation and  business development in high-tech SME clusters as these  studies  could  benefit  tremendously  from  more qualitative  approaches, which  facilitate  in-depth  understanding  continuous  and  changing  processes. Therefore, major...

  6. The lifecycle approach as a driver for innovative power contracting; Der Lifecycle-Ansatz als Treiber fuer innovatives Energie-Contracting

    Gayer, Alfred [RWE Energiedienstleistungen GmbH (Germany)

    2011-07-01

    The sensible and efficient use of energy raises more and more the general awareness. The efficiency of projects will be influenced not only by the replacement of existing technology, but also mainly by the general conception of the design of decentralized energy supplies. The integration of waste heat from production-related processes as well as the use of all forms of energy such as electricity, heat, refrigeration and compressed air to meet the customer needs in a comprehensive energy plan increase the complexity and significantly the efficiencies. In the implementation of such projects the contracting is becoming increasingly important because the future gains in efficiency are taken into account directly. Contracting projects include the traditional total-cost-of-ownership approach (lifecycle approach). This approach considers the investment costs as well as the consequential costs of a project and shows how to optimize the total cost.

  7. Managing Innovation.

    White, Ronald V.

    The management of innovation in instruction in English as a second language can benefit from the experience and techniques of management in the world of commerce as well as from theories and procedures in education. A systematic approach to the management of innovation emphasizes the importance of clearly defined objectives, evaluation that…

  8. Implementation of Safe-by-Design for Nanomaterial Development and Safe Innovation: Why We Need a Comprehensive Approach.

    Kraegeloh, Annette; Suarez-Merino, Blanca; Sluijters, Teun; Micheletti, Christian

    2018-04-14

    Manufactured nanomaterials (MNMs) are regarded as key components of innovations in various fields with high potential impact (e.g., energy generation and storage, electronics, photonics, diagnostics, theranostics, or drug delivery agents). Widespread use of MNMs raises concerns about their safety for humans and the environment, possibly limiting the impact of the nanotechnology-based innovation. The development of safe MNMs and nanoproducts has to result in a safe as well as functional material or product. Its safe use, and disposal at the end of its life cycle must be taken into account too. However, not all MNMs are similarly useful for all applications, some might bear a higher hazard potential than others, and use scenarios could lead to different exposure probabilities. To improve both safety and efficacy of nanotechnology, we think that a new proactive approach is necessary, based on pre-regulatory safety assessment and dialogue between stakeholders. On the basis of the work carried out in different European Union (EU) initiatives, developing and integrating MNMs Safe-by-Design and Trusted Environments (NANoREG, ProSafe, and NanoReg2), we present our point of view here. This concept, when fully developed, will allow for cost effective industrial innovation, and an exchange of key information between regulators and innovators. Regulators are thus informed about incoming innovations in good time, supporting a proactive regulatory action. The final goal is to contribute to the nanotechnology governance, having faster, cheaper, effective, and safer nano-products on the market.

  9. When homogeneity meets heterogeneity: the geographically weighted regression with spatial lag approach to prenatal care utilization

    Shoff, Carla; Chen, Vivian Yi-Ju; Yang, Tse-Chuan

    2014-01-01

    Using geographically weighted regression (GWR), a recent study by Shoff and colleagues (2012) investigated the place-specific risk factors for prenatal care utilization in the US and found that most of the relationships between late or not prenatal care and its determinants are spatially heterogeneous. However, the GWR approach may be subject to the confounding effect of spatial homogeneity. The goal of this study is to address this concern by including both spatial homogeneity and heterogeneity into the analysis. Specifically, we employ an analytic framework where a spatially lagged (SL) effect of the dependent variable is incorporated into the GWR model, which is called GWR-SL. Using this innovative framework, we found evidence to argue that spatial homogeneity is neglected in the study by Shoff et al. (2012) and the results are changed after considering the spatially lagged effect of prenatal care utilization. The GWR-SL approach allows us to gain a place-specific understanding of prenatal care utilization in US counties. In addition, we compared the GWR-SL results with the results of conventional approaches (i.e., OLS and spatial lag models) and found that GWR-SL is the preferred modeling approach. The new findings help us to better estimate how the predictors are associated with prenatal care utilization across space, and determine whether and how the level of prenatal care utilization in neighboring counties matters. PMID:24893033

  10. A grey DEMATEL-based approach for modeling enablers of green innovation in manufacturing organizations.

    Gupta, Himanshu; Barua, Mukesh Kumar

    2018-04-01

    Incorporating green practices into the manufacturing process has gained momentum over the past few years and is a matter of great concern for both manufacturers as well as researchers. Regulatory pressures in developed countries have forced the organizations to adopt green practices; however, this issue still lacks attention in developing economies like India. There is an urgent need to identify enablers of green innovation for manufacturing organizations and also to identify prominent enablers among those. This study is an attempt to first identify enablers of green innovation and then establish a causal relationship among them to identify the enablers that can drive others. Grey DEMATEL (Decision Making Trial and Evaluation Laboratory) methodology is used for establishing the causal relationship among enablers. The novelty of this study lies in the fact that no study has been done in the past to identify the enablers of green innovation and then establishing the causal relationship among them. A total of 21 enablers of green innovation have been identified; research indicates developing green manufacturing capabilities, resources for green innovation, ease of getting loans from financial institutions, and environmental regulations as the most influential enablers of green innovation. Managerial and practical implications of the research are also presented to assist managers of the case company in adopting green innovation practices at their end.

  11. The HepTestContest: a global innovation contest to identify approaches to hepatitis B and C testing.

    Tucker, Joseph D; Meyers, Kathrine; Best, John; Kaplan, Karyn; Pendse, Razia; Fenton, Kevin A; Andrieux-Meyer, Isabelle; Figueroa, Carmen; Goicochea, Pedro; Gore, Charles; Ishizaki, Azumi; Khwairakpam, Giten; Miller, Veronica; Mozalevskis, Antons; Ninburg, Michael; Ocama, Ponsiano; Peeling, Rosanna; Walsh, Nick; Colombo, Massimo G; Easterbrook, Philippa

    2017-11-01

    Innovation contests are a novel approach to elicit good ideas and innovative practices in various areas of public health. There remains limited published literature on approaches to deliver hepatitis testing. The purpose of this innovation contest was to identify examples of different hepatitis B and C approaches to support countries in their scale-up of hepatitis testing and to supplement development of formal recommendations on service delivery in the 2017 World Health Organization hepatitis B and C testing guidelines. This contest involved four steps: 1) establishment of a multisectoral steering committee to coordinate a call for contest entries; 2) dissemination of the call for entries through diverse media (Facebook, Twitter, YouTube, email listservs, academic journals); 3) independent ranking of submissions by a panel of judges according to pre-specified criteria (clarity of testing model, innovation, effectiveness, next steps) using a 1-10 scale; 4) recognition of highly ranked entries through presentation at international conferences, commendation certificate, and inclusion as a case study in the WHO 2017 testing guidelines. The innovation contest received 64 entries from 27 countries and took a total of 4 months to complete. Sixteen entries were directly included in the WHO testing guidelines. The entries covered testing in different populations, including primary care patients (n = 5), people who inject drugs (PWID) (n = 4), pregnant women (n = 4), general populations (n = 4), high-risk groups (n = 3), relatives of people living with hepatitis B and C (n = 2), migrants (n = 2), incarcerated individuals (n = 2), workers (n = 2), and emergency department patients (n = 2). A variety of different testing delivery approaches were employed, including integrated HIV-hepatitis testing (n = 12); integrated testing with harm reduction and addiction services (n = 9); use of electronic medical records to support targeted testing (n = 8

  12. The HepTestContest: a global innovation contest to identify approaches to hepatitis B and C testing

    Joseph D. Tucker

    2017-11-01

    Full Text Available Abstract Background Innovation contests are a novel approach to elicit good ideas and innovative practices in various areas of public health. There remains limited published literature on approaches to deliver hepatitis testing. The purpose of this innovation contest was to identify examples of different hepatitis B and C approaches to support countries in their scale-up of hepatitis testing and to supplement development of formal recommendations on service delivery in the 2017 World Health Organization hepatitis B and C testing guidelines. Methods This contest involved four steps: 1 establishment of a multisectoral steering committee to coordinate a call for contest entries; 2 dissemination of the call for entries through diverse media (Facebook, Twitter, YouTube, email listservs, academic journals; 3 independent ranking of submissions by a panel of judges according to pre-specified criteria (clarity of testing model, innovation, effectiveness, next steps using a 1-10 scale; 4 recognition of highly ranked entries through presentation at international conferences, commendation certificate, and inclusion as a case study in the WHO 2017 testing guidelines. Results The innovation contest received 64 entries from 27 countries and took a total of 4 months to complete. Sixteen entries were directly included in the WHO testing guidelines. The entries covered testing in different populations, including primary care patients (n = 5, people who inject drugs (PWID (n = 4, pregnant women (n = 4, general populations (n = 4, high-risk groups (n = 3, relatives of people living with hepatitis B and C (n = 2, migrants (n = 2, incarcerated individuals (n = 2, workers (n = 2, and emergency department patients (n = 2. A variety of different testing delivery approaches were employed, including integrated HIV-hepatitis testing (n = 12; integrated testing with harm reduction and addiction services (n = 9; use of electronic medical records to

  13. A User Centered Innovation Approach Identifying Key User Values for the E-Newspaper

    Carina Ihlström Eriksson; Jesper Svensson

    2009-01-01

    We have studied the pre-adoption phase of the e-newspaper, i.e. a newspaper published with e-paper technology. The research question of this article is: In what way can a user centered innovation process contribute to identifying key values in mobile innovations? The aim of this article is threefold: firstly, to identify key values for the e-newspaper, secondly, to examine the intention to adopt a new possible innovation and thirdly, to explore user centered design processes ability to captur...

  14. Special funding schemes for innovative medical devices in French hospitals: the pros and cons of two different approaches.

    Martelli, Nicolas; van den Brink, Hélène

    2014-07-01

    Financing innovative medical devices is an important challenge for national health policy makers, and a crucial issue for hospitals. However, when innovative medical devices are launched on the European market there is generally little clinical evidence regarding both efficacy and safety, both because of the flaws in the European system for regulating such devices, and because they are at an early stage of development. To manage the uncertainty surrounding the reimbursement of innovation, several European countries have set up temporary funding schemes to generate evidence about the effectiveness of devices. This article explores two different French approaches to funding innovative in-hospital devices and collecting supplementary data: the coverage with evidence development (CED) scheme introduced under Article L. 165-1-1 of the French Social Security Code; and national programs for hospital-based research. We discuss pros and cons of both approaches in the light of CED policies in Germany and the UK. The CED policies for devices share common limitations. Thus, transparency of CED processes should be enhanced and decisions need to be made in a timely way. Finally, we think that closer collaboration between manufacturers, health authorities and hospitals is essential to make CED policies more operational. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. How physics teachers approach innovation: An empirical study for reconstructing the appropriation path in the case of special relativity

    Anna De Ambrosis

    2010-08-01

    Full Text Available This paper concerns an empirical study carried out with a group of high school physics teachers engaged in the Module on relativity of a Master course on the teaching of modern physics. The study is framed within the general research issue of how to promote innovation in school via teachers’ education and how to foster fruitful interactions between research and school practice via the construction of networks of researchers and teachers. In the paper, the problems related to innovation are addressed by focusing on the phase during which teachers analyze an innovative teaching proposal in the perspective of designing their own paths for the class work. The proposal analyzed in this study is Taylor and Wheeler’s approach for teaching special relativity. The paper aims to show that the roots of problems known in the research literature about teachers’ difficulties in coping with innovative proposals, and usually related to the implementation process, can be found and addressed already when teachers approach the proposal and try to appropriate it. The study is heuristic and has been carried out in order to trace the “appropriation path,” followed by the group of teachers, in terms of the main steps and factors triggering the progressive evolution of teachers’ attitudes and competences.

  16. A Visual Arts Education pedagogical approach for enhancing quality of life for persons with dementia (innovative practice).

    Tietyen, Ann C; Richards, Allan G

    2017-01-01

    A new and innovative pedagogical approach that administers hands-on visual arts activities to persons with dementia based on the field of Visual Arts Education is reported in this paper. The aims of this approach are to enhance cognition and improve quality of life. These aims were explored in a small qualitative study with eight individuals with moderate dementia, and the results are published as a thesis. In this paper, we summarize and report the results of this small qualitative study and expand upon the rationale for the Visual Arts Education pedagogical approach that has shown promise for enhancing cognitive processes and improving quality of life for persons with dementia.

  17. Meeting the regulatory challenges of mixed waste storage and monitoring: A novel approach

    Wilkinson, Dennis; Shaw, Mark

    1992-01-01

    This paper describes an original approach to providing safe storage of Remote Handled TRU Mixed Waste that is required to meet the EPA double liner and leachate collection system standards. This system, known as the 'Environmental Vault Liner', also allows a cost effective means of complying with the EPA's inspection requirements per 40 CFR 265.170, Use and Management of Containers. This approach is modular in nature, allowing additional storage capacity to be added on a demand basis, thereby eliminating significant upfront costs associated with large storage facilities built on estimated needs over many years. It reduces the financial and technical risks associated with large storage construction projects, allows modifications to new Liners put into service based on changing regulations and technologies. The Environmental Vault Liner offers additional benefits including easy waste retrieval, a 300 year design life, continuous below ground liquid detection and monitoring, replaceable instrumentation, inert (Nitrogen) atmosphere for container storage, continuous air monitoring, and remote visual container inspections. (author)

  18. Online Innovation

    Vujovic, Sladjana; Ulhøi, John Parm

    2008-01-01

      Purpose - The aim of this paper is to investigate the role of online networking during the innovation process, including its role(s) in communication, cooperation and coordination. The paper neither implicitly assumes that online computer-based networking is a prerequisite for the innovation...... process nor denies the possibility that innovation can emerge and successfully survive without it. It merely presupposes that, in cases of innovation where information and communication technologies play a substantial role, non-proprietarity may offer an interesting alternative to innovations based...... on proprietary knowledge. Design/methodology/approach - The paper borrows from the theory of communities-of-practice, which takes into account social relations, contacts, and the transfer and incorporation of knowledge. Open source innovation is not the exclusive preserve of computer nerds, but also has...

  19. Team Clinic: An Innovative Group Care Model for Youth with Type 1 Diabetes-Engaging Patients and Meeting Educational Needs.

    Berget, Cari; Lindwall, Jennifer; Shea, Jacqueline J; Klingensmith, Georgeanna J; Anderson, Barbara J; Cain, Cindy; Raymond, Jennifer K

    2017-06-01

    The purpose of this pilot was to implement an innovative group care model, "Team Clinic", for adolescents with type 1 diabetes and assess patient and provider perspectives. Ninety-one intervention patients and 87 controls were enrolled. Ninety-six percent of intervention adolescents endorsed increased support and perceived connecting with peers as important. The medical providers and staff also provided positive feedback stating Team Clinic allowed more creativity in education and higher quality of care. Team Clinic may be a promising model to engage adolescents and incorporate education and support into clinic visits in a format valued by patients and providers.

  20. Approaches to Innovation Process Assessment: Complex Results from an Exploratory Investigation

    Ondrej Zizlavsky

    2015-12-01

    companies is noted. Therefore, this paper is supposed to motivate researchers to conduct more large-scale studies in the area of innovative performance measurement systems and their implementation in different business sectors and areas.

  1. BAYESIAN APPROACH TO THE PROCESS OF IDENTIFICATION OF THE DETERMINANTS OF INNOVATIVENESS

    Marta Czyżewska

    2014-08-01

    Full Text Available Bayesian belief networks are applied in determining the most important factors of the innovativeness level of national economies. The paper is divided into two parts. The first presentsthe basic theory of Bayesian networks whereas in the second, the belief networks have been generated by an inhouse developed computer system called BeliefSEEKER which was implemented to generate the determinants influencing the innovativeness level of national economies.Qualitative analysis of the generated belief networks provided a way to define a set of the most important dimensions influencing the innovativeness level of economies and then the indicators that form these dimensions. It has been proven that Bayesian networks are very effective methods for multidimensional analysis and forming conclusions and recommendations regarding the strength of each innovative determinant influencing the overall performance of a country’s economy.

  2. Psychological contract breaches, organizational commitment, and innovation-related behaviors: a latent growth modeling approach.

    Ng, Thomas W H; Feldman, Daniel C; Lam, Simon S K

    2010-07-01

    This study examined the relationships among psychological contract breaches, organizational commitment, and innovation-related behaviors (generating, spreading, implementing innovative ideas at work) over a 6-month period. Results indicate that the effects of psychological contract breaches on employees are not static. Specifically, perceptions of psychological contract breaches strengthened over time and were associated with decreased levels of affective commitment over time. Further, increased perceptions of psychological contract breaches were associated with decreases in innovation-related behaviors. We also found evidence that organizational commitment mediates the relationship between psychological contract breaches and innovation-related behaviors. These results highlight the importance of examining the nomological network of psychological contract breaches from a change perspective.

  3. Innovative Approaches to Development and Ground Testing of Advanced Bimodal Space Power and Propulsion Systems

    Hill, T.; Noble, C.; Martinell, J.; Borowski, S.

    2000-01-01

    The last major development effort for nuclear power and propulsion systems ended in 1993. Currently, there is not an initiative at either the National Aeronautical and Space Administration (NASA) or the U.S. Department of Energy (DOE) that requires the development of new nuclear power and propulsion systems. Studies continue to show nuclear technology as a strong technical candidate to lead the way toward human exploration of adjacent planets or provide power for deep space missions, particularly a 15,000 lbf bimodal nuclear system with 115 kW power capability. The development of nuclear technology for space applications would require technology development in some areas and a major flight qualification program. The last major ground test facility considered for nuclear propulsion qualification was the U.S. Air Force/DOE Space Nuclear Thermal Propulsion Project. Seven years have passed since that effort, and the questions remain the same, how to qualify nuclear power and propulsion systems for future space flight. It can be reasonably assumed that much of the nuclear testing required to qualify a nuclear system for space application will be performed at DOE facilities as demonstrated by the Nuclear Rocket Engine Reactor Experiment (NERVA) and Space Nuclear Thermal Propulsion (SNTP) programs. The nuclear infrastructure to support testing in this country is aging and getting smaller, though facilities still exist to support many of the technology development needs. By renewing efforts, an innovative approach to qualifying these systems through the use of existing facilities either in the U.S. (DOE's Advance Test Reactor, High Flux Irradiation Facility and the Contained Test Facility) or overseas should be possible

  4. The FAMULATUR PLUS as an innovative approach for teaching physical examination skills

    Jerg, Achim

    2016-02-01

    Full Text Available The FAMULATUR PLUS is an innovative approach to teaching physical examination skills. The concept is aimed at medical students during the clinical part of their studies and includes a clinical traineeship (English for “Famulatur” extended to include various courses (“PLUS”. The courses are divided into clinical examination courses and problembased-learning (PBL seminars. The concept’s special feature is the full integration of these courses into a 30-day hospital traineeship. The aim is to facilitate the transfer of knowledge from the courses into daily practice. Each week of the FAMULATUR PLUS is structured in line with the courses and focuses on a particular part of the body (e.g., abdomen. A physical examination course under the supervision of a physician is offered at the beginning of the week. Here, medical students learn the relevant examination techniques by practicing on each other (partner exercises. Subsequently, the techniques taught are applied independently during everyday work on the ward, corrected by the supervisor, if necessary, and thereby reinforced. The final POL seminar takes place towards the end of the week. Possible differential diagnoses are developed based on a clinical case study. The goal is to check these by taking a fictitious medical history and performing a physical examination, as well as to make a preliminary diagnosis. Finally, during the PBL seminar, medical students will be shown how physical examination techniques can be efficiently applied in the diagnosis of common cardinal symptoms (e.g., abdominal pain. The initial implementation of the FAMULATUR PLUS proved the practical feasibility of the concept. In addition, the accompanying evaluation showed that the participants of the pilot project improved with regard to their practical physical examination skills.

  5. An Innovative Approach for Decreasing Fall Trauma Admissions from Geriatric Living Facilities: Preliminary Investigation.

    Evans, Tracy; Gross, Brian; Rittenhouse, Katelyn; Harnish, Carissa; Vellucci, Ashley; Bupp, Katherine; Horst, Michael; Miller, Jo Ann; Baier, Ron; Chandler, Roxanne; Rogers, Frederick B

    2015-12-01

    Geriatric living facilities have been associated with a high rate of falls. We sought to develop an innovative intervention approach targeting geriatric living facilities that would reduce geriatric fall admissions to our Level II trauma center. In 2011, a Trauma Prevention Taskforce visited 5 of 28 local geriatric living facilities to present a fall prevention protocol composed of three sections: fall education, risk factor identification, and fall prevention strategies. To determine the impact of the intervention, the trauma registry was queried for all geriatric fall admissions attributed to patients living at local geriatric living facilities. The fall admission rate (total fall admissions/total beds) of the pre-intervention period (2010-2011) was compared with that of the postintervention period (2012-2013) at the 5 intervention and 23 control facilities. A P value fall admissions attributed to local geriatric living facilities (intervention: 179 fall admissions; control: 308 fall admissions). The unadjusted fall rate decreased at intervention facilities from 8.9 fall admissions/bed pre-intervention to 8.1 fall admissions/bed postintervention, whereas fall admission rates increased at control sites from 5.9 to 7.7 fall admissions/bed during the same period [control/intervention odds ratio (OR), 95% confidence interval (CI) = 1.32, 1.05-1.67; period OR, 95%CI = 1.55, 1.18-2.04, P = 0.002; interaction of control/intervention group and period OR 95% CI = 0.68, 0.46-1.00, P = 0.047]. An aggressive intervention program targeting high-risk geriatric living facilities resulted in a statistically significant decrease in geriatric fall admissions to our Level II trauma center.

  6. The FAMULATUR PLUS as an innovative approach for teaching physical examination skills.

    Jerg, Achim; Öchsner, Wolfgang; Wander, Henriette; Traue, Harald C; Jerg-Bretzke, Lucia

    2016-01-01

    The FAMULATUR PLUS is an innovative approach to teaching physical examination skills. The concept is aimed at medical students during the clinical part of their studies and includes a clinical traineeship (English for "Famulatur") extended to include various courses ("PLUS"). The courses are divided into clinical examination courses and problembased-learning (PBL) seminars. The concept's special feature is the full integration of these courses into a 30-day hospital traineeship. The aim is to facilitate the transfer of knowledge from the courses into daily practice. Each week of the FAMULATUR PLUS is structured in line with the courses and focuses on a particular part of the body (e.g., abdomen). A physical examination course under the supervision of a physician is offered at the beginning of the week. Here, medical students learn the relevant examination techniques by practicing on each other (partner exercises). Subsequently, the techniques taught are applied independently during everyday work on the ward, corrected by the supervisor, if necessary, and thereby reinforced. The final POL seminar takes place towards the end of the week. Possible differential diagnoses are developed based on a clinical case study. The goal is to check these by taking a fictitious medical history and performing a physical examination, as well as to make a preliminary diagnosis. Finally, during the PBL seminar, medical students will be shown how physical examination techniques can be efficiently applied in the diagnosis of common cardinal symptoms (e.g., abdominal pain). The initial implementation of the FAMULATUR PLUS proved the practical feasibility of the concept. In addition, the accompanying evaluation showed that the participants of the pilot project improved with regard to their practical physical examination skills.

  7. An innovative approach to undergraduate climate change education: Sustainability in the workplace

    Robinson, Z. P.

    2009-04-01

    Climate change and climate science are a core component of environment-related degree programmes, but there are many programmes, for example business studies, that have clear linkages to climate change and sustainability issues which often have no or limited coverage of the subject. Although an in-depth coverage of climate science is not directly applicable to all programmes of study, the subject of climate change is of great relevance to all of society. Graduates from the higher education system are often viewed as society's ‘future leaders', hence it can be argued that it is important that all graduates are conversant in the issues of climate change and strategies for moving towards a sustainable future. Rather than an in depth understanding of climate science it may be more important that a wider range of students are educated in strategies for positive action. One aspect of climate change education that may be missing, including in programmes where climate change is a core topic, is practical strategies, skills and knowledge for reducing our impact on the climate system. This presentation outlines an innovative approach to undergraduate climate change education which focuses on the strategies for moving towards sustainability, but which is supported by climate science understanding taught within this context. Students gain knowledge and understanding of the motivations and strategies for businesses to improve their environmental performance, and develop skills in identifying areas of environmental improvement and recommending actions for change. These skills will allow students to drive positive change in their future careers. Such courses are relevant to students of all disciplines and can give the opportunity to students for whom climate change education is not a core part of their programme, to gain greater understanding of the issues and an awareness of practical changes that can be made at all levels to move towards a more sustainable society.

  8. Innovation Approaches to Development and Ground Testing of Advanced Bimodal Space Power and Propulsion Systems

    Hill, T.; Noble, C.; Martinell, J. (INEEL); Borowski, S. (NASA Glenn Research Center)

    2000-07-14

    The last major development effort for nuclear power and propulsion systems ended in 1993. Currently, there is not an initiative at either the National Aeronautical and Space Administration (NASA) or the U.S. Department of Energy (DOE) that requires the development of new nuclear power and propulsion systems. Studies continue to show nuclear technology as a strong technical candidate to lead the way toward human exploration of adjacent planets or provide power for deep space missions, particularly a 15,000 lbf bimodal nuclear system with 115 kW power capability. The development of nuclear technology for space applications would require technology development in some areas and a major flight qualification program. The last major ground test facility considered for nuclear propulsion qualification was the U.S. Air Force/DOE Space Nuclear Thermal Propulsion Project. Seven years have passed since that effort, and the questions remain the same, how to qualify nuclear power and propulsion systems for future space flight. It can be reasonably assumed that much of the nuclear testing required to qualify a nuclear system for space application will be performed at DOE facilities as demonstrated by the Nuclear Rocket Engine Reactor Experiment (NERVA) and Space Nuclear Thermal Propulsion (SNTP) programs. The nuclear infrastructure to support testing in this country is aging and getting smaller, though facilities still exist to support many of the technology development needs. By renewing efforts, an innovative approach to qualifying these systems through the use of existing facilities either in the U.S. (DOE's Advance Test Reactor, High Flux Irradiation Facility and the Contained Test Facility) or overseas should be possible.

  9. Innovative Approaches to Development and Ground Testing of Advanced Bimodal Space Power and Propulsion Systems

    Hill, Thomas Johnathan; Noble, Cheryl Ann; Noble, C.; Martinell, John Stephen; Borowski, S.

    2000-07-01

    The last major development effort for nuclear power and propulsion systems ended in 1993. Currently, there is not an initiative at either the National Aeronautical and Space Administration (NASA) or the U.S. Department of Energy (DOE) that requires the development of new nuclear power and propulsion systems. Studies continue to show nuclear technology as a strong technical candidate to lead the way toward human exploration of adjacent planets or provide power for deep space missions, particularly a 15,000 lbf bimodal nuclear system with 115 kW power capability. The development of nuclear technology for space applications would require technology development in some areas and a major flight qualification program. The last major ground test facility considered for nuclear propulsion qualification was the U.S. Air Force/DOE Space Nuclear Thermal Propulsion Project. Seven years have passed since that effort, and the questions remain the same, how to qualify nuclear power and propulsion systems for future space flight. It can be reasonable assumed that much of the nuclear testing required to qualify a nuclear system for space application will be performed at DOE facilities as demonstrated by the Nuclear Rocket Engine Reactor Experiment (NERVA) and Space Nuclear Thermal Propulsion (SNTP) programs. The nuclear infrastructure to support testing in this country is aging and getting smaller, though facilities still exist to support many of the technology development needs. By renewing efforts, an innovative approach to qualifying these systems through the use of existing facilities either in the U.S. (DOE's Advance Test Reactor, High Flux Irradiation Facility and the Contained Test Facility) or overseas should be possible.

  10. Innovative Approaches Using Lichen Enriched Media to Improve Isolation and Culturability of Lichen Associated Bacteria.

    Biosca, Elena G; Flores, Raquel; Santander, Ricardo D; Díez-Gil, José Luis; Barreno, Eva

    2016-01-01

    Lichens, self-supporting mutualistic associations between a fungal partner and one or more photosynthetic partners, also harbor non-photosynthetic bacteria. The diversity and contribution of these bacteria to the functioning of lichen symbiosis have recently begun to be studied, often by culture-independent techniques due to difficulties in their isolation and culture. However, culturing as yet unculturable lichenic bacteria is critical to unravel their potential functional roles in lichen symbiogenesis, to explore and exploit their biotechnological potential and for the description of new taxa. Our objective was to improve the recovery of lichen associated bacteria by developing novel isolation and culture approaches, initially using the lichen Pseudevernia furfuracea. We evaluated the effect of newly developed media enriched with novel lichen extracts, as well as the influence of thalli washing time and different disinfection and processing protocols of thalli. The developed methodology included: i) the use of lichen enriched media to mimic lichen nutrients, supplemented with the fungicide natamycin; ii) an extended washing of thalli to increase the recovery of ectolichenic bacteria, thus allowing the disinfection of thalli to be discarded, hence enhancing endolichenic bacteria recovery; and iii) the use of an antioxidant buffer to prevent or reduce oxidative stress during thalli disruption. The optimized methodology allowed significant increases in the number and diversity of culturable bacteria associated with P. furfuracea, and it was also successfully applied to the lichens Ramalina farinacea and Parmotrema pseudotinctorum. Furthermore, we provide, for the first time, data on the abundance of culturable ecto- and endolichenic bacteria that naturally colonize P. furfuracea, R. farinacea and P. pseudotinctorum, some of which were only able to grow on lichen enriched media. This innovative methodology is also applicable to other microorganisms inhabiting these

  11. Innovative Approaches Using Lichen Enriched Media to Improve Isolation and Culturability of Lichen Associated Bacteria

    Biosca, Elena G.; Flores, Raquel; Santander, Ricardo D.; Díez-Gil, José Luis; Barreno, Eva

    2016-01-01

    Lichens, self-supporting mutualistic associations between a fungal partner and one or more photosynthetic partners, also harbor non-photosynthetic bacteria. The diversity and contribution of these bacteria to the functioning of lichen symbiosis have recently begun to be studied, often by culture-independent techniques due to difficulties in their isolation and culture. However, culturing as yet unculturable lichenic bacteria is critical to unravel their potential functional roles in lichen symbiogenesis, to explore and exploit their biotechnological potential and for the description of new taxa. Our objective was to improve the recovery of lichen associated bacteria by developing novel isolation and culture approaches, initially using the lichen Pseudevernia furfuracea. We evaluated the effect of newly developed media enriched with novel lichen extracts, as well as the influence of thalli washing time and different disinfection and processing protocols of thalli. The developed methodology included: i) the use of lichen enriched media to mimic lichen nutrients, supplemented with the fungicide natamycin; ii) an extended washing of thalli to increase the recovery of ectolichenic bacteria, thus allowing the disinfection of thalli to be discarded, hence enhancing endolichenic bacteria recovery; and iii) the use of an antioxidant buffer to prevent or reduce oxidative stress during thalli disruption. The optimized methodology allowed significant increases in the number and diversity of culturable bacteria associated with P. furfuracea, and it was also successfully applied to the lichens Ramalina farinacea and Parmotrema pseudotinctorum. Furthermore, we provide, for the first time, data on the abundance of culturable ecto- and endolichenic bacteria that naturally colonize P. furfuracea, R. farinacea and P. pseudotinctorum, some of which were only able to grow on lichen enriched media. This innovative methodology is also applicable to other microorganisms inhabiting these

  12. Model of the Russian Federation Construction Innovation System: An Integrated Participatory Systems Approach

    Emiliya Suprun; Oz Sahin; Rodney A. Stewart; Kriengsak Panuwatwanich

    2016-01-01

    This research integrates systemic and participatory techniques to model the Russian Federation construction innovation system. Understanding this complex construction innovation system and determining the best levers for enhancing it require the dynamic modelling of a number of factors, such as flows of resources and activities, policies, uncertainty and time. To build the foundations for such a dynamic model, the employed study method utilised an integrated stakeholder-based participatory ap...

  13. Essays on Innovation and Growth in Food Networks. An Organisational Approach

    Brink, Tove

    Denne Ph.d. afhandling omhandler innovation og vækst i små og mellemstore virksomheder (SMVer), der indgår i fødevarenetværk i landdistrikter. Formålet er at afdække hvordan organiseringen af begrænsninger (’boundaries’) i organisationer kan aktivere innovation og vækst. Afhandlingen består af 5 ...

  14. Organizational Culture and Firms’ Internationalization, Innovativeness and Networking Behaviour: Hofstede Approach

    Maja Szymura-Tyc; Michał Kucia

    2016-01-01

    Objective: The objective of this paper is to describe the features of firms’ organizational culture within four of Hofstede’s national culture dimensions and their potential relationships with internationalization, innovativeness and networking behaviour of firms. Research Design & Methods: This explorative quantitative research refers to results of an earlier study on internationalization, innovativeness and networking of firms in Poland. Descriptive statistics are used to depict the...

  15. Innovations in nuclear concrete constructions

    Tatum, C.B.

    1983-01-01

    The technical requirements and scope of concrete work on nuclear projects present significant engineering and construction challenges. These demands represent the extremes in many areas of construction operations. In meeting these challenges, engineering and construction forces have developed several innovations which can be beneficially applied to other types of construction. Innovative approaches in the general categories of engineering scope, construction input to engineering, work planning, special methods and techniques, and satisfaction of quality assurance requirements are given in this paper. The transfer of this technology to other segments of the construction industry will improve overall performance by avoiding the problem areas encountered on nuclear projects

  16. Dilemmas in the Analysis of Technological Change. A Cognitive Approach to Understand Innovation and Change in the Water Sector

    Dino Borri

    2014-05-01

    Full Text Available In this paper we argue for the need to apply a cognitive approach to understand deep dynamics and determinants of technological evolutions. After examining main contributions from innovation studies to the conceptualization of innovation and change in complex socio-technical environments, we highlight the contribution coming from the application of the cognitive approach to evolutionary studies on technologies and we introduce the concept of technological memory as an interpretative tool to understand those changes. We discuss our hypothesis with reference to several observations carried out in different local contexts – Mexico, India and Italy – in relation to technological change in the water sector. In those cases deliberate attempts to substitute traditional technologies with modern ones led to interesting trajectories of change ranging from the collapse of old technologies to the development of multifaceted hybridization patterns.

  17. Planning an innovation marathon at an infectious disease conference with results from the International Meeting on Emerging Diseases and Surveillance 2016 Hackathon.

    Ramatowski, John W; Lee, Christopher Xiang; Mantzavino, Aikaterini; Ribas, João; Guerra, Winter; Preston, Nicholas D; Schernhammer, Eva; Madoff, Lawrence C; Lassmann, Britta

    2017-12-01

    A hackathon is best described as an 'innovation marathon'. Derived from the words 'hacking' and 'marathon', it brings together multidisciplinary teams to collaborate intensely over a short period of time to define a problem, devise a solution, and design a working prototype. International scientific meetings are conducive to successful hackathons, providing an audience of expert professionals who describe challenges and ensure the proposed solutions address end-user needs. Collaborations with local organizations and academic centers are crucial to attracting complementary specialties such as IT advisors, engineers, and entrepreneurs to develop sustainable projects. The core process of first identifying and deconstructing a problem followed by solution iteration is applicable to challenges at workplaces around the world. Ultimately, this model can be used to drive innovation and catalyze change in the global health community. The planning, execution, and outcomes of a hackathon event organized in conjunction with the International Meeting on Emerging Diseases and Surveillance (IMED 2016) are described in this article. Physicians, public health practitioners, veterinarians, IT professionals, engineers, and entrepreneurs came together for 2days to develop solutions at the intersection of emerging infectious diseases and climate change. Projects that resulted from the IMED 2016 Hackathon included environmental impact assessment software for humanitarian organization relief efforts; enhanced communication tools to prevent disease outbreaks; a participatory mobile application to speed the elimination of rabies in Indonesia; integrated disease surveillance platforms; and an improved search function for infectious disease outbreak reports in the ProMED-mail network. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  18. Designing collaborative policy innovation

    Agger, Annika; Sørensen, Eva

    2014-01-01

    Recent approaches to enhancing public innovation suffer from two shortcomings: They overemphasize competition as a driver of innovation and overlook the fact that public sector innovation involves policy innovation as well as service innovation. Drawing on governance research and innovation theory......, the chapter investigates the extent to which and how collaboration between politicians and relevant stakeholders can spur the formulation, implementation and diffusion of new innovative policies. A case study of a process of collaborative policy innovation in a Danish municipality shows that collaborative...... policy arenas do contribute to policy innovation but also that the degree to which they do so depends on the institutional design of these arenas....

  19. An innovative design approach to a cost effective commercial liquid metal reactor

    Carelli, M. D.; Garkisch, H. D.; Hundal, R.; Arie, K.; Handa, N.; Ota, H.; Matsuyama, S.; Todreas, N.; Hejzlar, P.; Wells, P.; Louis, T. S.

    2008-01-01

    use the SGHARS (Steam Generator Auxiliary Removal System) which uses the steam generator. In the abnormal event of the loss of feedwater we can use the RVACS (Reactor Vessel Auxiliary Cooling System). In a pool configuration, decay heat is transferred by conduction to the vessel and then by radiation and conduction to the guard vessel. The guard vessel is cooled initially by evaporative cooling followed by natural draft air cooling of the external surface. This approach is similar to the one taken for the AP1000. Finally, another innovative feature is the inclusion of a tertiary shutdown system. Thanks to the inherent reactivity feedbacks response the LMR can be brought to hot shutdown even when both the primary and secondary shutdown systems are unavailable. However, the core will experience high transient temperatures, before they are finally brought down by the reactivity feedbacks. The designer has to account for these high temperatures attained during ATWS (Anticipated Transients Without Scram). Since an ATWS is by definition the absence of both the primary and secondary shutdown systems, adoption of a tertiary system will eliminate the ATWS from design considerations. The system considered is different from the other two shutdown systems both in terms of absorber configuration and mode of insertion. The probability of simultaneous failure of all three diverse systems is less than the 10-8 threshold. Elimination of ATWS design considerations allows a power increase of the order of 10%, while the capital cost increase associated with the tertiary system is less than 1%. In summary our approach to achieve economic competitiveness with advanced LWRs is very simple: design the ARR with the same philosophy and within similar constraints. This is implemented by the innovative components presented here. (authors)

  20. Innovative molecular approach to the identification of Colossoma macropomum and its hybrids

    Fátima Gomes

    2012-06-01

    Full Text Available Tambaqui (Colossoma macropomum is the fish species most commonly raised in the Brazilian fish farms. The species is highly adaptable to captive conditions, and is both fast-growing and relatively fecund. In recent years, artificial breeding has produced hybrids with Characiform species, known as "Tambacu" and "Tambatinga". Identifying hybrids is a difficult process, given their morphological similarities with the parent species. This study presents an innovative molecular approach to the identification of hybrids based primarily on Multiplex PCR of a nuclear gene (α-Tropomyosin, which was tested on 93 specimens obtained from fish farms in northern Brazil. The sequencing of a 505-bp fragment of the Control Region (CR permitted the identification of the maternal lineage of the specimen, all of which corresponded to C. macropomum. Unexpectedly, only two CR haplotype were found in 93 samples, a very low genetic diversity for the pisciculture of Tambaqui. Multiplex PCR identified 42 hybrids, in contrast with 23 identified by the supplier on the basis of external morphology. This innovative tool has considerable potential for the development of the Brazilian aquaculture, given the possibility of the systematic identification of the genetic traits of both fry-producing stocks, and the fry and juveniles raised in farms.O Tambaqui (Colossoma macropomum é a espécie de peixe mais comumente cultivada em pisciculturas no Brasil. A espécie é altamente adaptada às condições de cativeiro, apresentando rápido crescimento e alta fecundidade. Nos últimos anos tem ocorrido o cruzamento artificial entre espécies de Characiformes, produzindo os híbridos "Tambacu" e "Tambatinga". A identificação de híbridos é uma tarefa difícil, em virtude da grande similaridade morfológica entre as espécies parentais. O presente estudo apresenta uma abordagem molecular inovadora para identificação de híbridos com base em PCR Multiplex de um gene nuclear (

  1. Governance and innovation in public sector services

    Scupola, Ada; Zanfei, Antonello

    2016-01-01

    changes; (ii) user-driven innovations have significantly increased with the diffusion of ICTs and Web based public services; and (iii) complex innovations are facilitated by face-to-face meetings between public servants and users. Third, it is suggested that changes in governance modes affect the balance...... between the different actors involved, thus influencing the nature and intensity of innovation. Fourth and finally, it is argued that the transition towards a networked governance approach requires information policies which persist over time, and are designed to increase collaboration between different...

  2. A Non-Parametric Delphi Approach to Foster Innovation Policy Debate in Spain

    Juan Carlos Salazar-Elena

    2016-05-01

    Full Text Available The aim of this paper is to identify some changes needed in Spain’s innovation policy to fill the gap between its innovation results and those of other European countries in lieu of sustainable leadership. To do this we apply the Delphi methodology to experts from academia, business, and government. To overcome the shortcomings of traditional descriptive methods, we develop an inferential analysis by following a non-parametric bootstrap method which enables us to identify important changes that should be implemented. Particularly interesting is the support found for improving the interconnections among the relevant agents of the innovation system (instead of focusing exclusively in the provision of knowledge and technological inputs through R and D activities, or the support found for “soft” policy instruments aimed at providing a homogeneous framework to assess the innovation capabilities of firms (e.g., for funding purposes. Attention to potential innovators among small and medium enterprises (SMEs and traditional industries is particularly encouraged by experts.

  3. Measuring the Effectiveness of the Chinese Innovation System: A Global Value Chain Approach

    Douglas Zhihua Zeng

    2017-01-01

    This paper study argues that some disruptive new trends are surfacing with the emergence of new technologies,which makes an efficient and effective R&D and innovation system even more relevant for any country to compete at a global level.Against this backdrop,the study tries to measure the effectiveness of the Chinese innovation system,using the "R&D spending as percentage of GDP" as the input variable and the "contribution of R&D and related business activities to the value-added manufacturing exports" as the output variable.Based on a 59-country sample in the OECD-WTO TiVA database,the regression results show a significant and positive correlation between the two variables.The findings also complement with other existing empirical and qualitative studies in this area.The overall findings show that China has achieved significant efficiency and effectiveness in its innovation system compared with many other countries;in fact,since 2009,the efficiency has accelerated.However,it still lags behind the major global players.This means China still has some room to improve in order to transform its increasing inputs in R&D and technology innovation into commensurate outputs.This situation calls for further improvements in its innovation ecosystem.

  4. Single event and TREE latchup mitigation for a star tracker sensor: An innovative approach to system level latchup mitigation

    Kimbrough, J.R.; Colella, N.J.; Davis, R.W.; Bruener, D.B.; Coakley, P.G.; Lutjens, S.W.; Mallon, C.E.

    1994-08-01

    Electronic packages designed for spacecraft should be fault-tolerant and operate without ground control intervention through extremes in the space radiation environment. If designed for military use, the electronics must survive and function in a nuclear radiation environment. This paper presents an innovative ''blink'' approach rather than the typical ''operate through'' approach to achieve system level latchup mitigation on a prototype star tracker camera. Included are circuit designs, flash x-ray test data, and heavy ion data demonstrating latchup mitigation protecting micro-electronics from current latchup and burnout due to Single Event Latchup (SEL) and Transient Radiation Effects on Electronics (TREE)

  5. Measurement of Design Process Front-End – Radical Innovation Approach

    Berg, Pekka; Pihlajamaa, Jussi; Hansen, Poul H. Kyvsgård

    2014-01-01

    The overall structure and the main characteristics of the future product are all decided in the front-end phase, which then strongly affects subsequent new product development activities. Recent studies indicate that these early front-end activities represent the most troublesome phase...... of the innovation process, and at the same time one of the greatest opportunities to improve the overall innovation capability of a company. In this paper dealing with the criteria we concentrate only for the objectives viewpoint and leave the attributes discussion to the future research. Two most crucial questions...... the innovation activities front end contains five assessment viewpoints as follows; input, process, output (including impacts), social environment and structural environment. Based on the results from our first managerial implications in three Finnish manufacturing companies we argue, that the developed model...

  6. [Health technology assessment: a multidisciplinary approach for selecting innovations in the health service].

    Cavallo, Maria Caterina

    2013-01-01

    Technological evolution and the increasing requests of a more qualified health care have challenged politicians to evaluate the economical sustainability of proposed innovations. The objective of government health policies is to guarantee real advances in the quality of care to all citizens. Since 1965, independent research centers have analyzed this issue for the US Congress. In 1973, Congress endorsed the establishment of an Office of Technology Assessment (OTA) to discover the best strategies for evaluating such advances. OTA have proposed the following criteria to identify possible beneficial innovations to be introduced into routine health care: effectiveness, safeness, worth, costs, cost-effectiveness ratio and cost patient-benefit ratio. This review analyzes in detail the pathway that each medical innovation follows in order to identify which technological evolutions might prove to be truly beneficial and sustainable for the community.

  7. Cancer-related anorexia/cachexia syndrome and oxidative stress: an innovative approach beyond current treatment.

    Mantovani, Giovanni; Madeddu, Clelia; Macciò, Antonio; Gramignano, Giulia; Lusso, Maria Rita; Massa, Elena; Astara, Giorgio; Serpe, Roberto

    2004-10-01

    Cancer-related anorexia/cachexia syndrome and oxidative stress play a key role in the progression and outcome of neoplastic disease. On the basis of our previously published studies and clinical experience, we have developed an innovative approach consisting of diet with high polyphenol content (400 mg), p.o. pharmaconutritional support enriched with n - 3 fatty acids (eicosapentaenoic acid and docosahexaenoic acid) 2 cans (237 mL each) per day, medroxiprogesterone acetate 500 mg/d, antioxidant treatment with alpha-lipoic acid 300 mg/d plus carbocysteine lysine salt 2.7 g/d plus vitamin E 400 mg/d plus vitamin A 30,000 IU/d plus vitamin C 500 mg/d, and selective cyclooxygenase-2 inhibitor Celecoxib 200 mg/d. The treatment is administered for 16 weeks. The following variables are evaluated: (a) clinical variables (stage and Eastern Cooperative Oncology Group performance status); (b) nutritional variables (lean body mass, appetite, and resting energy expenditure); (c) laboratory variables (serum levels of proinflammatory cytokines, C-reactive protein, and leptin and blood levels of reactive oxygen species and antioxidant enzymes); and (d) quality of life variables (European Organization for Research and Treatment of Cancer QLQ-C30, EQ-5Dindex, and EQ-5DVAS). A phase II nonrandomized study has been designed to enroll 40 patients with advanced cancer at different sites with symptoms of cancer-related anorexia/cachexia syndrome and oxidative stress. As of January 2004, 28 patients have been enrolled: 25 patients were evaluable and 14 of them have completed the treatment (20 patients have completed 2 months of treatment). As for clinical response, five patients improved, three patients remained unchanged, and six patients worsened. The Eastern Cooperative Oncology Group performance status (grade) 1 remained unchanged. As for nutritional/functional variables, the lean body mass increased significantly at 2 and 4 months. As for laboratory variables, reactive oxygen species

  8. RISK VIP: Evaluation of Flood Risk on the French Railway Network Using an Innovative GIS Approach

    Cheetham Mark

    2016-01-01

    Full Text Available Flooding can have significant direct and indirect negative effects on a railway network affecting both infrastructure and rail operations. Such impacts include the delaying or cancelling of train services, damage to railway structures or the implementation of costly maintenance and monitoring programs to ensure the safety and performance of the railway system. Identifying sections of railway line at risk from flooding allows appropriate actions to be targeted at specific areas and contributes to an effective asset management plan. Flooding of railway infrastructure can have numerous sources including surface water run-off, insufficient capacity of hydraulic structures or the inundation of embankments located in floodplains. Consequences of flooding include the destabilisation of structures (surface erosion of embankments or the undermining of bridge foundations, differential settlement of structures and damage to the track structure. This paper details an innovative approach developed at the SNCF using a Geographic Information System (GIS model to identify zones of the railway network at risk of different types of flooding. The GIS model RiskVIP has been constructed through the assessment of three distinct components of risk: “Vulnerability” (assessment of the susceptibility of the railway infrastructure to flood conditions, Intensity’ (capacity of a catchment to generate a flood flow, Probability’ (probability of a rainfall event.Through the application of decision trees, the component ‘Intensity’ has been characterised in the model by the physical properties of the catchment intercepted by the railway line (surface area of the catchment, slope and land cover characteristics and “Vulnerability” by the infrastructure itself (type, geometry and the presence of hydraulic structures. In order to evaluate its efficiency at identifying sites at risk of flooding, the model has been tested in the region of Languedoc-Roussillon in France

  9. Co-innovation of family farm systems: A systems approach to sustainable agriculture

    Dogliotti Moro, S.; García, M.C.; Peluffo, S.; Dieste, J.P.; Pedemonte, A.J.; Bacigalupe, G.F.; Scarlato, M.; Alliaume, F.; Alvarez, J.; Chiappe, M.; Rossing, W.A.H.

    2014-01-01

    Meeting the goals of sustainable growth of food production and reducing rural poverty requires assisting family farmers to develop more productive, profitable, resource efficient and environmentally friendly farms. Faced with decreasing product prices and increasing production costs during the last

  10. Innovative Approaches Address Aging and Mental Health Needs in LGBTQ Communities.

    Hoy-Ellis, Charles P; Ator, Michael; Kerr, Christopher; Milford, Jessica

    2016-01-01

    LGBTQ older adults have higher levels of psychological distress as compared to older adults in general. They also experience multiple barriers to accessing equitable, culturally competent mental health and aging services because of their distinct histories and particular social contexts. This article discusses this lack of access to services, and highlights an innovative way mental health services are being delivered in LGBTQ communities.

  11. Towards controlled innovation of complex objects. : A sociotechnical approach to describing ship design

    van Bruinessen, T.M.

    2016-01-01

    Within the ship design industry, and in particular in the development of large, complex and innovative vessels experienced ship designers play an important role in organizing and structuring the design process. How this actually happens within projects that develop such large, complex and

  12. Climate Masters of Nebraska: An Innovative Action-Based Approach for Climate Change Education

    Pathak, Tapan B.; Bernadt, Tonya; Umphlett, Natalie

    2014-01-01

    Climate Masters of Nebraska is an innovative educational program that strategically trains community volunteers about climate change science and corresponding ways to reduce greenhouse gas emissions in an interactive and action-based teaching environment. As a result of the program, 91% of participants indicated that they made informed changes in…

  13. Mind the Gap: Infilling Stiegler's Philosophico-Educational Approach to Social Innovation

    Reveley, James; Peters, Michael A.

    2016-01-01

    According to Bernard Stiegler, social innovations in the educational field are an antidotical cure for social pathologies wrought by the digitalisation of society. This article explores how Stiegler's social pharmacology links to the human-technical co-constitution thesis that he first expounded in "Technics and Time, 1." Not only do we…

  14. An Innovative Whole Child Approach to Learning: The LiiNK Project®

    Rhea, Deborah; Bauml, Michellle

    2018-01-01

    Others' success can be a powerful motivation to innovate, which sometimes means finding new ways to return to beneficial activities. Finland's academic success has prompted many to explore that country's policies and practices, particularly regarding providing opportunities for children to enjoy more unstructured play.

  15. Innovation in Services: A Lancastrian Approach to the Field of E-Learning

    Shivdas, P. Avinash; Sivakumar, Soumya

    2016-01-01

    Innovation in services is one of the prime drivers of several economies. There are various schools of thought that have emerged over the past few decades in this area. The present paper focuses on the evolution of the "synthesis" school of thought. It contributes to literature by extending the framework proposed by Lancaster ("The…

  16. An innovative approach to solid Low Level Radioactive Waste processing and disposal

    Pancake, D.C. Jr.; Sodaro, M.A.

    1994-01-01

    This paper will focus on a new system of Low Level Radioactive Waste (LLW) accumulation, processing and packaging, as-well as the implementation of a Laboratory-wide training program used to introduce new waste accumulation containers to all of the on-site radioactive waste generators, and to train them on the requirements of this innovative waste characterization and documentation program

  17. Opportunities to Personalize Teacher Learning: Innovative Approaches to Bridge Evaluation and Professional Development for Continuous Improvement

    Kassner, Laura

    2014-01-01

    The purpose of this report was to consider ways to integrating teacher evaluation and professional development--specifically, to explore innovative ways to harness feedback from teacher evaluations for the creation of personalized professional learning for teachers. This study was commissioned by the planning council members of the Metropolitan…

  18. Localized innovation and productivity growth in Asia : an intertemporal DEA approach

    Timmer, Marcel P.; Los, Bart

    2002-01-01

    Recent contributions to growth theory stress the importance of localized innovation for the performance of more backward countries. In earlier papers, analyses by means of DEA techniques confirmed this intuition. In this paper, we extend this type of analysis by relaxing the macroeconomic viewpoint

  19. The role of Innovation in Merger Policy: Europe's efficiency defense versus America's Innovatoin Markets approach

    Cefis, E.; Grondsma, M.; Sabidussi, A.; Schenk, E.J.J.

    2007-01-01

    Changes in the world’s economies and discussions in the literature about the growing importance of innovation to firms have given rise to a demand for expanding the analysis of merger policy. The present study focuses on the different criteria used to assess the impact of M&A activities on

  20. A triple Helix Approach to the Future Innovation Flagship of Europe:

    Jofre, Sergio; Andersen, Per Dannemand

    2009-01-01

    in the European Union and its closer competitors, Japan and the United States. Main results suggest that the innovation systems in this study are in a transition stage at different degrees of change. Such transitions, broadly motivated by the challenge of globalization and sustainable development...

  1. A scenario-driven approach for value, risk and cost analysis in system architecting for innovation

    Ionita, M.T.; America, P.H.M.; Hammer, D.K.; Obbink, J.H.; Trienekens, J.J.M.; Magee, J.; Szyperski, C.; Bosch, J.

    2004-01-01

    We present a quantitative method for scenario-driven value, risk, and cost analysis when proposing new system architectures for innovation projects. The method helps to articulate the relative benefits and/or disadvantages of the proposed set of scenarios in the early architecting phases of a new

  2. Servitization of products as an approach for design-driven innovation

    Baha, S.E.; Groenewoud, A.; Mensvoort, van K.M.

    2014-01-01

    In this paper we present how the meaning of a product can radically be innovated through add-on services and related service support products to the existing product instead of significantly redesigning it. We explore and investigate this assertion with an action-oriented case study using a research

  3. Radiation protection training award - an innovative approach of testing radiation protection skills in catastrophe management

    Geringer, T.

    2003-01-01

    own emergency planning. ARCS Bronze award consists of 4 practical exercises followed by a theoretical test. The praxis requirements include the detection and identification of a radioactive source, application of a low level gamma monitor, principles of personnel monitoring, control of external hazard as well as taking environmental samples. Theoretical testing ranges from the nature of radioactivity and radiation units to the legislation related to radiological protection. Evaluation is given in an objective numeric grading. The Silver award includes the treatment of nuclear emergencies such as the detonation of a nuclear weapon, an accident in a radionuclid/ isotop lab or an accident in a nuclear plant. The candidates have also to present their skills in handling an transportation accident, arranging immediate catastrophe management. The candidates' background ranged from security force members to academics. The problem of harmonized training standards is, especially since the September 11 th attacks, a worldwide need. Security forces have to show their practical knowledge and secure their theoretical background to eventually update their skills. The protection of the general population can only be ensured by a homogenous training as well as perfect collaboration of the security units. Therefore an intensive training of the security guards performed by specialists must be guaranteed. ARCS radiation protection awards can be seen as the motivational background to this approach. Also the social component must not be neglected since the period of training at ARCS offers a perfect environment for interdisciplinary discussion. Safety culture and training experiences in the field of radiation protection in Austria depend an such an information system and ARCS has shown experience in that field for decades. Innovative approaches in training and sharing information as well as experience are seen as important tools to maintain safety culture. Harmonization and national

  4. The use of innovation action research approach in the preparation of a regulation on costing standard 

    Monika Raulinajtys-Grzybek

    2016-04-01

    Full Text Available The article analyzes the applicability of the innovation action research method for activities related to the preparation of a concept of a costing standard for healthcare providers which is subject to legal regula- tion. This legislation regulates the way providers, reporting data for the purpose of the regulated pricing of health services, identify and calculate costs. A 39-month long research project was carried out in ac- cordance with the innovation action research approach, which resulted in the creation of a novel concept of a costing model. The generation of new knowledge occurred as a result of a collaboration between researchers and practitioners, which is a basic assumption of action research. The consecutive steps of the research have been characterized in order to present the influence of the research method on the devel- opment and modification of the initial concept.

  5. Meeting water needs for sustainable development: an overview of approaches, measures and data sources

    Lissner, Tabea; Reusser, Dominik E.; Sullivan, Caroline A.; Kropp, Jürgen P.

    2013-04-01

    An essential part of a global transition towards sustainability is the Millennium Development Goals (MDG), providing a blueprint of goals to meet human needs. Water is an essential resource in itself, but also a vital factor of production for food, energy and other industrial products. Access to sufficient water has only recently been recognized as a human right. One central MDG is halving the population without access to safe drinking water and sanitation. To adequately assess the state of development and the potential for a transition towards sustainability, consistent and meaningful measures of water availability and adequate access are thus fundamental. Much work has been done to identify thresholds and definitions to measure water scarcity. This includes some work on defining basic water needs of different sectors. A range of data and approaches has been made available from a variety of sources, but all of these approaches differ in their underlying assumptions, the nature of the data used, and consequently in the final results. We review and compare approaches, methods and data sources on human water use and human water needs. This data review enables identifying levels of consumption in different countries and different sectors. Further comparison is made between actual water needs (based on human and ecological requirements), and recognised levels of water abstraction. The results of our review highlight the differences between different accounts of water use and needs, and reflect the importance of standardised approaches to data definitions and measurements, making studies more comparable across space and time. The comparison of different use and allocation patterns in countries enables levels of water use to be identified which allow for an adequate level of human wellbeing to be maintained within sustainable water abstraction limits. Recommendations are provided of how data can be defined more clearly to make comparisons of water use more meaningful and

  6. Innovative Disposal Practices at the Nevada Test Site to Meet Its Low-Level Waste Generators' Future Disposal Needs

    Di Sanza, E.F.; Carilli, J.T.

    2006-01-01

    Low-level radioactive waste (LLW) streams which have a clear, defined pathway to disposal are becoming less common as U.S. Department of Energy accelerated cleanup sites enters their closure phase. These commonly disposed LLW waste streams are rapidly being disposed and the LLW inventory awaiting disposal is dwindling. However, more complex waste streams that have no path for disposal are now requiring attention. The U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NSO) Environmental Management Program is charged with the responsibility of carrying out the disposal of onsite and off-site defense-generated and research-related LLW at the Nevada. Test Site (NTS). The NSO and its generator community are constantly pursuing new LLW disposal techniques while meeting the core mission of safe and cost-effective disposal that protects the worker, the public and the environment. From trenches to present-day super-cells, the NTS disposal techniques must change to meet the LLW generator's disposal needs. One of the many ways the NTS is addressing complex waste streams is by designing waste specific pits and trenches. This ensures unusual waste streams with high-activity or large packaging have a disposal path. Another option the NTS offers is disposal of classified low-level radioactive-contaminated material. In order to perform this function, the NTS has a safety plan in place as well as a secure facility. By doing this, the NTS can accept DOE generated classified low-level radioactive-contaminated material that would be equivalent to U.S. Nuclear Regulatory Commission Class B, C, and Greater than Class C waste. In fiscal year 2006, the NTS will be the only federal disposal facility that will be able to dispose mixed low-level radioactive waste (MLLW) streams. This is an activity that is highly anticipated by waste generators. In order for the NTS to accept MLLW, generators will have to meet the stringent requirements of the NTS

  7. Approaches of eco-innovation: Uncertainty assessment and the integration of green technology foresight and life cycle assessment as a policy tool

    Borup, M.

    2005-01-01

    The perspective of eco-innovation is gaining increasing attention in European policy development as well as in a number of individual countries. As basis for this lies the acknowledgement that we on the one hand live in a technology andinnovation-oriented society and that some new technologies......-innovation in practice is made operational. A key issue in eco-innovation is to improveassessments and discussions of uncertainties and new environmental risks in connection with innovative technology developments. Approaches to this have as support for policy development processes been combined with environmentally...... oriented technologyforesight methods integrated with the perspective of life cycle assessments of new technologies. The paper describes a number of examples of these approaches and discusses further perspectives for an eco-innovation policy....

  8. Transforming Innovation for Sustainability

    Melissa Leach

    2012-06-01

    Full Text Available The urgency of charting pathways to sustainability that keep human societies within a "safe operating space" has now been clarified. Crises in climate, food, biodiversity, and energy are already playing out across local and global scales and are set to increase as we approach critical thresholds. Drawing together recent work from the Stockholm Resilience Centre, the Tellus Institute, and the STEPS Centre, this commentary article argues that ambitious Sustainable Development Goals are now required along with major transformation, not only in policies and technologies, but in modes of innovation themselves, to meet them. As examples of dryland agriculture in East Africa and rural energy in Latin America illustrate, such "transformative innovation" needs to give far greater recognition and power to grassroots innovation actors and processes, involving them within an inclusive, multi-scale innovation politics. The three dimensions of direction, diversity, and distribution along with new forms of "sustainability brokering" can help guide the kinds of analysis and decision making now needed to safeguard our planet for current and future generations.

  9. Participatory Innovation

    Buur, Jacob; Matthews, Ben

    2008-01-01

    An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant appr...... the challenges such an approach sets to innovation management, and discuss research directions we see as fundamental to the development of the field of user-driven innovation. Udgivelsesdato: September......An increasing number of corporations engage with users in co-innovation of products and services. But there are a number of competing perspectives on how best to integrate these understandings into existing corporate innovation development processes. This paper maps out three of the dominant...... approaches, compares them in terms of goals, methods and basic philosophy, and shows how they may beneficially enrich one another. We will present an industrial innovation case that has been instrumental to the development of what we have termed ‘Participatory Innovation’. Based on this we will list...

  10. Two approaches to meeting the economic challenge for advanced BWR designs

    Arnold, H.; Rao, A.S.; Sawyer, C.D.

    1996-01-01

    In developing next generation nuclear power plants many economic challenges must be addressed before they become economically attractive to utilities. The economic challenges vary from country to country but have several common characteristics. First and foremost, a plant has to have the lowest construction (costs) to even be considered for design and construction. Additionally, the plant design has to a have a reasonable chance of being licensed by the regulatory authorities in order to minimize the financial risk to the constructing utility. With the long lead times involved in the design and development of advanced plants nowadays, the overall development costs have also become a key factor in the evolution of advanced plants. This paper presents the design overview and approach to addressing the aforementioned economic challenges for two Advanced Boiling Water Reactor (ABWR) designs. The first plant is the ABWR and the second is the European Simplified Boiling Water. The ABWR relies on proven technology and components and an extensive infrastructure that has been built up over the last 20 year. Because it has proven and standard safety systems, which have been licensed in two countries, it has very limited uncertainly regarding licensing. Finally, it relies on the economies of scale and design flexibility to improve the overall economics of power generation. The ESBWR on the other hand has taken an innovative approach to reduce systems and components to simplify the overall plant to improve plant economics. The overall plant design is indeed simpler, but improved economics required reliance on some economies of scale also. This design embodied in the ESBWR, also has minimized the overall development cost by utilizing features and components from the ABWR and Simplified Boiling Water Reactor technology programs. (authors)

  11. PLACE-BASED EDUCATION APPROACH AS AN INNOVATION OF AN INTEGRATED CURRICULUM

    fidyati sulaiman

    2015-05-01

    Full Text Available Curriculum design is aimed to promote equality of empowerment. In most practice, however, the curriculum purposes confront conflicts especially between national and local needs. Consequently, there are many insightful and innovative educational work which has relatively small advantages for students and schools in its flexibility and opportunity. This leads to a situation in which some groups have lack of opportunities in getting benefit from the educational curriculum application. This essay presents an appproch as an innovation of an integrated curriculum called as place-based education. The significance of this strategy is believed to be able to promote the content of learning to the level of local’s relevance and engagement. Finally, the more relevant of the learning content to the students’ socio-cultural life the broader participation they can play in the community and future career.

  12. МЕTHODOLOGICAL APPROACHES TO EVALUATION OF OPERATION OF INNOVATION INFRASTRUCTURE ENTITIES

    E. V. Korolyova

    2010-01-01

    Full Text Available Innovation infrastructure entities (IIEs have become a new social institution which regulates relations between all stakeholders involved in the technology R&D and introduction process and decrease transaction costs on information dissemination and decision-making. While making IIE efficiency evaluation it is necessary to take into account the following: from one side, an influence of the given entity on the activity of scientific and educational institutions, innovative enterprises, investors, and, from the other side, IIE is to be considered as an institution that influences on  social and economic and political processes in the country and correspondingly is subjected to reverse influence of some institutions and economic system as a whole.

  13. Applying social innovation theory to examine how community co-designed health services develop: using a case study approach and mixed methods.

    Farmer, Jane; Carlisle, Karen; Dickson-Swift, Virginia; Teasdale, Simon; Kenny, Amanda; Taylor, Judy; Croker, Felicity; Marini, Karen; Gussy, Mark

    2018-01-31

    Citizen participation in health service co-production is increasingly enacted. A reason for engaging community members is to co-design services that are locally-appropriate and harness local assets. To date, much literature examines processes of involving participants, with little consideration of innovative services are designed, how innovations emerge, develop and whether they sustain or diffuse. This paper addresses this gap by examining co-designed initiatives through the lens of social innovation - a conceptualisation more attuned to analysing grassroots innovation than common health services research approaches considering top-down, technical innovations. This paper considers whether social innovation is a useful frame for examining co-designed services. Eighty-eight volunteer community-based participants from six rural Australian communities were engaged using the same, tested co-design framework for a 12-month design and then 12-month implementation phase, in 24 workshops (2014-16). Mixed, qualitative data were collected and used to formulate five case studies of community co-designed innovations. A social innovation theory, derived from literature, was applied as an analytical frame to examine co-design cases at 3 stages: innovation growth, development and sustainability/diffusion. Social innovation theory was found relevant in examining and understanding what occurred at each stage of innovation development. Innovations themselves were all adaptations of existing ideas. They emerged due to local participants combining knowledge from local context, own experiences and exemplars. External facilitation brought resources together. The project provided a protective niche in which pilot innovations developed, but they needed support from managers and/or policymakers to be implemented; and to be compatible with existing health system practices. For innovations to move to sustainability/diffusion required political relationships. Challenging existing practice

  14. Evaluation capacity assessment of the transport sector in South Africa: An innovative approach

    Basia D. Bless

    2017-05-01

    Conclusion: In this regard, the framework is recommended as an innovative tool to assist evaluation practitioners and scholars to better understand evaluation capacity constraints within a broader context that involves logistical, technical, contextual, social and political dimensions. It also offers an important insight on how these components interfaced to shape the organisational value system that impacts the use of evidence in the transport sector in South Africa.

  15. METHODICAL APPROACHES TO FORMING INNOVATIVE PROJECT AND ENTERPRISE MANAGEMENT ORGANIZATIONAL STRUCTURES

    A. O. Baklanov

    2011-01-01

    Full Text Available The following principles are discussed as methodical bases of the choice of innovative project and enterprise management organizational structures: hierarchism, bureaucratization, adhocratie, tent organization, lean business engineering, rational organization, amorphous organization, teaching organization. Conditions that complicate industrial and technological processes influence enterprise management process dynamics. The variety of existing types of organizational structures is determined by industrial, economic, psychological and social conditions.

  16. Sustainable innovation policy advice using a policy watch approach to ‘policies’ mapping

    Repo, Juha Petteri; Matschoss, Kaisa Johanna; Tregner-Mlinaric, Anita; Van Eynde, Sarah; Ramioul, Monique; Damianova, Zoya; Kozarev, Ventseslav

    2017-01-01

    This chapter illustrates via a piloted application how one of the five steps of the CASI Framework (CASI-F), which is designed for the management and assessment of sustainable innovation, can be applied to monitor policy developments. To this end, we reviewed 96 policy recommendations from CASI policy briefs concerning the Europe 2020 strategy, with a special focus on resource efficiency. The results show that CASI-F can provide a useful additional tool for analysing and reflecting on the out...

  17. The Habitation Lab: Using a Design Approach to Foster Innovation for Sustainable Living

    Paula Femenías

    2013-11-01

    Full Text Available This article describes a first step towards a strategy for using living labs as a means to foster innovation and develop new concepts of sustainable living from an architectural point of view. The overall aim is to enable truly sustainable living through radically reduced energy and resource use thus addressing both environmental and social aspects of sustainability. Earlier research has shown that contemporary housing developments, including those with a sustainable profile, do not profoundly question modern lifestyles and consumption, which is a necessity to overcome limitations of a technological focus on environmental efficiency in construction. Thus, we see an opportunity for the discipline of architecture to engage in current investments in living lab facilities in order to push innovation in the field of sustainable housing. We introduce the concept of a "Habitation Lab", which will provide an arena for radical and high-risk design experimentation between users, building-sector actors, and academia, and we describe a case study of a planned Habitation Lab within a living lab facility where traditional solutions for daily living and habitation are questioned and new architectural innovations are explored and evaluated. The idea of using experimental activities in the field of housing is not new, and we argue that new investments should build on earlier experiences to avoid perpetuating misconceptions and repeating past failures. Furthermore, to ensure the dissemination and uptake of results, the design of the Habitation Lab should consider the innovation and learning trajectories of the building sector. We propose a transdisciplinary setting to provide a neutral arena for value creation and to increase the distribution of experiences.

  18. The third international meeting on genetic disorders in the RAS/MAPK pathway: towards a therapeutic approach.

    Korf, Bruce; Ahmadian, Reza; Allanson, Judith; Aoki, Yoko; Bakker, Annette; Wright, Emma Burkitt; Denger, Brian; Elgersma, Ype; Gelb, Bruce D; Gripp, Karen W; Kerr, Bronwyn; Kontaridis, Maria; Lazaro, Conxi; Linardic, Corinne; Lozano, Reymundo; MacRae, Calum A; Messiaen, Ludwine; Mulero-Navarro, Sonia; Neel, Benjamin; Plotkin, Scott; Rauen, Katherine A; Roberts, Amy; Silva, Alcino J; Sittampalam, Sitta G; Zhang, Chao; Schoyer, Lisa

    2015-08-01

    "The Third International Meeting on Genetic Disorders in the RAS/MAPK Pathway: Towards a Therapeutic Approach" was held at the Renaissance Orlando at SeaWorld Hotel (August 2-4, 2013). Seventy-one physicians and scientists attended the meeting, and parallel meetings were held by patient advocacy groups (CFC International, Costello Syndrome Family Network, NF Network and Noonan Syndrome Foundation). Parent and patient advocates opened the meeting with a panel discussion to set the stage regarding their hopes and expectations for therapeutic advances. In keeping with the theme on therapeutic development, the sessions followed a progression from description of the phenotype and definition of therapeutic endpoints, to definition of genomic changes, to identification of therapeutic targets in the RAS/MAPK pathway, to preclinical drug development and testing, to clinical trials. These proceedings will review the major points of discussion. © 2015 Wiley Periodicals, Inc.

  19. An adopter-centric approach to analyze the diffusion patterns of innovative residential heating systems in Sweden

    Mahapatra, Krushna; Gustavsson, Leif

    2008-01-01

    Innovation and diffusion of renewable energy technologies play a major role in mitigation of climate change. In Sweden replacing electric and oil heating systems with innovative heating systems such as district heating, heat pumps and wood pellet boilers in detached homes is a significant mitigation option. Using an adopter-centric approach, we analyzed the influence of investment subsidy on conversion of resistance heaters and oil boilers, and the variation in diffusion pattern of district heating, heat pumps and pellet boilers in Swedish detached homes. Results from questionnaire surveys of 1500 randomly selected homeowners in September 2004 and January 2007 showed that more than 80% of the respondents did not intend to install a new heating system. Hence, about 37% of the homeowners still have electric and oil heating systems. The government investment subsidy was important for conversion from a resistance heater, but not from an oil boiler. This is because homeowners currently replacing their oil boilers are the laggards, while those replacing resistance heaters are the 'early adopters'. Economic aspects and functional reliability were the most important factors for the homeowners when considering a new heating system. There is a variation in the perceived advantages associated with each of the innovative heating systems and therefore, the diffusion patterns of such systems vary. Installers and interpersonal sources were the most important communication channels for information on heating systems

  20. An adopter-centric approach to analyze the diffusion patterns of innovative residential heating systems in Sweden

    Mahapatra, Krushna; Gustavsson, Leif [Ecotechnology, Mid Sweden University, 831 25 Oestersund (Sweden)

    2008-02-15

    Innovation and diffusion of renewable energy technologies play a major role in mitigation of climate change. In Sweden replacing electric and oil heating systems with innovative heating systems such as district heating, heat pumps and wood pellet boilers in detached homes is a significant mitigation option. Using an adopter-centric approach, we analyzed the influence of investment subsidy on conversion of resistance heaters and oil boilers, and the variation in diffusion pattern of district heating, heat pumps and pellet boilers in Swedish detached homes. Results from questionnaire surveys of 1500 randomly selected homeowners in September 2004 and January 2007 showed that more than 80% of the respondents did not intend to install a new heating system. Hence, about 37% of the homeowners still have electric and oil heating systems. The government investment subsidy was important for conversion from a resistance heater, but not from an oil boiler. This is because homeowners currently replacing their oil boilers are the laggards, while those replacing resistance heaters are the 'early adopters'. Economic aspects and functional reliability were the most important factors for the homeowners when considering a new heating system. There is a variation in the perceived advantages associated with each of the innovative heating systems and therefore, the diffusion patterns of such systems vary. Installers and interpersonal sources were the most important communication channels for information on heating systems. (author)

  1. Policy Innovation in Innovation Policy

    Borras, Susana

    During the past two decades Europe has experienced important changes and transformations in the way in which governments approach the issue of science, technology and innovation, and their relation to economic growth and competitiveness. This has to do with the European Union level as well...... as with national and sub-national governments in Europe, all of them introducing interesting novelties in their innovation policy. These changes refer to different aspects of policy, mainly the content of policy initiatives towards science, technology and innovation; the instruments governments are using...... at the EU level, and mentions similar trends taking place at national and sub-national levels. The questions that guide the contents here are essentially three, namely, what are the main traits of innovation policies in Europe since the 1990s and how have the EU and different national governments approached...

  2. A Systems Approach to Identifying and Managing Opportunities and Constraints to Delivering Innovation Policy for Agriculture: An Analysis of the Australian Cooperative Research Centres (CRC) Program

    Sandall, Jean; Cooksey, Ray; Wright, Vic

    2011-01-01

    In this paper we outline an analytical approach to identifying points in the policy process where management intervention to adjust organizational design could enhance delivery of innovation policy over time. We illustrate this approach using an example from native vegetation policy in the state of Victoria, Australia. We then use this approach to…

  3. An international partnership approach to clean energy technology innovation: Carbon capture and storage

    Yang, Xiaoliang

    Is a global research partnership effective in developing, deploying, and diffusing clean energy technologies? Drawing on and extending innovation system studies, this doctoral dissertation elaborates an analytical model for a global technology learning system; examines the rationales, mechanisms, and effectiveness of the United States-- China Clean Energy Research Center Advanced Coal Technology Consortium (CERC-ACTC); and analyzes government's role in developing and implementing carbon capture and storage technologies in the United States (U.S.) and China. Studies have shown that successful technology innovation leads to economic prosperity and national competence, and prove that technology innovation does not happen in isolation but rather within interactive systems among stakeholders. However, the innovation process itself remains unclear, particularly with regard to interactive learning among and between major institutional actors, including technology developers, regulators, and financial organizations. This study seeks to advance scholarship on the interactive learning from the angle of global interactive learning. This dissertation research project seeks, as well, to inform policy-makers of how to strengthen international collaboration in clean energy technology development. The U.S.--China CERC-ACTC announced by Presidents Obama and Hu in 2009, provided a unique opportunity to close this scholarly gap. ACTC aimed to "advance the coal technology needed to safely, effectively, and efficiently utilize coal resources including the ability to capture, store, and utilize the emissions from coal use in both nations " through the joint research and development by U.S. and Chinese scientists and engineers. This dissertation project included one-year field research in the two countries, with in-depth interviews of key stakeholders, a survey of Consortium participants, analysis of available data, and site visits to collaborative research projects from 2013-2014. This

  4. Science, Technology and Innovation as Social Goods for Development: Rethinking Research Capacity Building from Sen's Capabilities Approach.

    Mormina, Maru

    2018-03-01

    Science and technology are key to economic and social development, yet the capacity for scientific innovation remains globally unequally distributed. Although a priority for development cooperation, building or developing research capacity is often reduced in practice to promoting knowledge transfers, for example through North-South partnerships. Research capacity building/development tends to focus on developing scientists' technical competencies through training, without parallel investments to develop and sustain the socioeconomic and political structures that facilitate knowledge creation. This, the paper argues, significantly contributes to the scientific divide between developed and developing countries more than any skills shortage. Using Charles Taylor's concept of irreducibly social goods, the paper extends Sen's Capabilities Approach beyond its traditional focus on individual entitlements to present a view of scientific knowledge as a social good and the capability to produce it as a social capability. Expanding this capability requires going beyond current fragmented approaches to research capacity building to holistically strengthen the different social, political and economic structures that make up a nation's innovation system. This has implications for the interpretation of human rights instruments beyond their current focus on access to knowledge and for focusing science policy and global research partnerships to design approaches to capacity building/development beyond individual training/skills building.

  5. The BOS-X approach: achieving drastic cost reduction in CPV through holistic power plant level innovation

    Plesniak, A.; Garboushian, V.

    2012-10-01

    In 2011, the Amonix Advanced Technology Group was awarded DOE SunShot funding in the amount of 4.5M to design a new Balance of System (BOS) architecture utilizing Amonix MegaModules™ focused on reaching the SunShot goal of 0.06-$0.08/kWhr LCOE. The project proposal presented a comprehensive re-evaluation of the cost components of a utility scale CPV plant and identified critical areas of focus where innovation is needed to achieve cost reduction. As the world's premier manufacturer and most experienced installer of CPV power plants, Amonix is uniquely qualified to lead a rethinking of BOS architecture for CPV. The presentation will focus on the structure of the BOS-X approach, which looks for the next wave of cost reduction in CPV through evaluation of non-module subsystems and the interaction between subsystems during the lifecycle of a solar power plant. Innovation around nonmodule components is minimal to date because CPV companies are just now getting enough practice through completion of large projects to create ideas and tests on how to improve baseline designs and processes. As CPV companies increase their installed capacity, they can utilize an approach similar to the methodology of BOS-X to increase the competitiveness of their product. Through partnership with DOE, this holistic approach is expected to define a path for CPV well aligned with the goals of the SunShot Initiative.

  6. SCIENTIFIC AND INNOVATIVE APPROACH TO PROBLEM PERTAINING TO EVALUATION AND MONITORING OF ENVIRONMENT QUALITY IN REPUBLIC OF BELARUS

    I. V. Voytov

    2009-01-01

    Full Text Available The paper proposes a scientific and innovative approach to solution of an important problem in the field of rational nature management and ecology which presupposes realization of evaluation, analysis and monitoring of environment  quality  (EQ in Belarus.  This  approach is based on methods and  facilities  of  administrative-command  and  partially  automatic-control  management.   The  main components of the innovative approach are an automatic  system for  evaluation and monitoring of EQ including estimation and formation of nature-resource potential within 11 cadaster and other data base, general principles on evaluation and monitoring of EQ, structural and algorithmic schemes for evaluation of ecological state of administrative territories, calculation of generalized indices of nature-territorial complexes and solution of nature protection problems in respect of EQ monitoring. A system of equation calculation for the analysis and evaluation of technogenic load on main nature components of the environment (free air, water objects, soil cover, realization of monitoring function in respect of EQ and ecological state of local and urban territories, nature resources  and enterprises, pollution and state of some recipients and also data resources for execution of analytical calculations and functions directed on monitoring quality of nature components of the environment is advanced in the paper.

  7. Optimization of an innovative approach involving mechanical activation and acid digestion for the extraction of lithium from lepidolite

    Vieceli, Nathália; Nogueira, Carlos A.; Pereira, Manuel F. C.; Durão, Fernando O.; Guimarães, Carlos; Margarido, Fernanda

    2018-01-01

    The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. Therefore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from lepidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and response-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphization and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.

  8. An interdisciplinary approach to teaching tehcnology entrepreneurship. A case study of the SDU Health Tech Innovator program

    Jensen, Søren; Danbjørg, Dorthe Boe; Tanev, Stoyan

    in shaping new technological products for the benefit of the health care sector. METHODS: The methodology is based on a constructive approach to the development and implementation of the Health Tech Innovator program, together with a parallel critical analytical process focusing on generating valuable...... insights through questionnaires and interviews with participants. These could help the refinement and the adjustment of the initial design of the program. The methodology has also adopted an effectuation-based ecosystem perspective focusing on engaging all relevant stakeholders, tools and resources...

  9. Open innovations, innovation communities and firm's innovative activities

    Getejanc Vesna

    2016-01-01

    Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

  10. When ‘national innovation system’ meet ‘varieties of capitalism’ arguments on labour qualifications: On the skill types and scientific knowledge needed for radical and incremental product innovations

    Herrmann, A.M.; Peine, A.

    2012-01-01

    The literatures on ‘varieties of capitalism’ (VoC) and ‘national innovation systems’ (NIS) propose very similar arguments about how firms require different types of labour qualifications to pursue strategies of radical product innovation (RPI), incremental product innovation (IPI), and product

  11. Do Decentralized Innovation Systems Promote Agricultural Technology Adoption? Experimental Evidence from Africa

    Pamuk, Haki; Bulte, Erwin|info:eu-repo/dai/nl/141315245; Adekunle, Adewale A.

    2014-01-01

    We use experimental data collected in 8 African countries to investigate whether a decentralized approach can promote the adoption of agricultural innovations. This participatory model is based on the creation of so-called ‘innovation platforms’ where local stakeholders meet and seek to identify

  12. Open innovation in urban energy systems

    Arnold, M. [Technische Universitaet Muenchen, TUM School of Management, Freising (Germany); Barth, V. [Carl von Ossietzky Universitaet Oldenburg, Ecological Economics, Oldenburg (Germany)

    2012-08-15

    Despite recent efforts, existing urban energy systems still hardly meet the demands of sustainable development or climate change. Meeting these targets thus will require innovations that use energy much more efficiently and emit far less greenhouse gases. These innovations need to be made on the production as well as the consumption side, on all levels, and need to cover not only technical aspects, but even more service solutions. While many of these solutions still need to be developed, some are already invented but only exist in limited market segments. Opening closed urban planning processes and using open innovation tools can foster bottom-up urban energy system transformation by addressing the interactive ways of decision-making integrating company representatives and citizens. While open innovation tools like (open) innovation workshops or ideas competitions are already used by several companies to find and develop new designs and products, there is yet little experience with energy efficiency ideas and bottom-up changes. Therefore, we analyse energy-efficient ideas generated in three different ideas competitions. We discuss the findings for theory and research on open innovation approaches and bottom-up urban changes. Our results show that there are a vast number of ideas available in the public. Open innovation tools offer advanced possibilities to generate energy-efficient solutions.

  13. Trust Species and Habitat Branch: using the innovative approaches of today to conserve biodiversity for tomorrow

    Stevens, Patricia; Walters, Katie D.

    2015-01-01

    Some of the biggest challenges facing wildlife today are changes to their environment from both natural and anthropogenic causes. Natural resource managers, planners, policy makers, industry and private landowners must make informed decisions and policies regarding management, conservation, and restoration of species, habitats, and ecosystem function in response to these changes. Specific needs include (1) a better understanding of population status and trends; (2) understanding of species’ habitat needs and roles in supporting ecosystem functions; (3) the ability to assess species’ responses to environmental changes and predict future responses; and (4) the development of innovative techniques and tools to better understand, minimize or prevent any unintended consequences of environmental change.

  14. Innovative approach to ash radioactivitiy and health impacts of lignite power plants

    Bosevski, T.; Pop-Jordanova, N. [Macedonian Academy of Sciences and Arts, Skopje (Macedonia)

    1998-12-31

    In Macedonia nearly 90% of the present electricity production utilizes domestic low-calorie lignite, and this is likely to continue for the next few decades. Local and global environmental impacts of fossil fuel utilization are considered. Some innovative extensions to standard methodologies of environmental risk assessment and management are considered. They involve ash radioactivity and psychosomatic health impacts from lignite power plants. Two extensions are proposed: one comprising complete radioactive chains when determining committed effective dose from lignite ash; the other by including the psychosomatic diseases, such as peptic ulcer and arterial hypertension, due to chronic stress induced by power plants during normal operation. 7 refs., 2 figs., 3 tabs.

  15. Innovative approaches to using new media and technology in health promotion for adolescents and young adults.

    Hyden, Christel; Cohall, Alwyn

    2011-12-01

    Over the past decade, new technology and media have changed the way we communicate, access information, and share content with one another. Most 12- to 17-year-olds now own cell phones, and most adolescents and young adults spend several hours per day on computers and cell phones. The American Academy of Pediatrics now encourages all pediatricians to increase their knowledge of new media and technology. This article details technology access among adolescents and young adults, highlights several current and potential innovative applications for new technology and social networking in health promotion, and discusses issues to consider as practitioners move toward integrating new media into clinical and health education settings.

  16. Effects of the Meetings-Flow Approach on Quality Teamwork in the Training of Software Capstone Projects

    Chen, Chung-Yang; Hong, Ya-Chun; Chen, Pei-Chi

    2014-01-01

    Software development relies heavily on teamwork; determining how to streamline this collaborative development is an essential training subject in computer and software engineering education. A team process known as the meetings-flow (MF) approach has recently been introduced in software capstone projects in engineering programs at various…

  17. A Cross-Cultural Approach to the Negotiation of Individual and Group Identities: Parliamentary Debates and Editorial Meetings

    Stewart, Miranda

    2012-01-01

    This article draws on interactional pragmatics and a cross-cultural approach (UK, France, Spain) to investigate the negotiation of individual and group identities in two different speech events, parliamentary debates and editorial meetings. The cross-cultural examination of the use of linguistic resources for signalling "social role,…

  18. AN ALTERNATIVE APPROACH TO MEET BEEF SELF-SUFFICIENCY IN WEST PAPUA

    S. Hartono

    2011-09-01

    Full Text Available The main objective of this research is to present an alternative approach to meet beef self-sufficiency in West Papua, Indonesia. It mainly focuses on calculating the needed number of productive cows to enhance beef production in the province. Out of the total farmer households in Manokwari, Indonesia, 189 farmer-respondents were selected as samples of the study. Selection of the sample was based on the number of cattle kept in every age group (less than one (2 years old and the number of productive cows. Secondary data came from the time series data of the number of slaughtered cattle vis-à-vis the population of all districts in West Papua Province from 1980-2008. Data were analyzed using the Partial Adjustment Model (PAM and Ordinary Least Square (OLS method. Results of the study showed that beef self-sufficiency in West Papua depend on the availability of the number of productive cows to produce ready-slaughtered-bull in the previous year. Particularly for West Papua, to produce one unit of bull in the tth –year, with the assumption that cattle mortality is 4.92%, a number of 2.38 animal units AU of productive cows must be provided in the previous two (2 years.

  19. Culture diversity/a mobile workforce command creative leadership, new partnerships, and innovative approaches to integration.

    Foley, Regina; Wurmser, Theresa A

    2004-01-01

    Today's healthcare environment requires that nursing leaders meet the needs of a growing multicultural workforce and patient population. Cultural factors may be overlooked as healthcare delivery becomes increasingly dominated by technological, economic, and social changes. Through creative leadership, the chief nurse executive (CNE) can encourage staff to pay closer attention to cultural factors that will impact on patient, staff, and hospital outcomes. The CNE can begin by enhancing his/her own multicultural competency, building these competencies in his/her staff, and then empowering staff to respect and accommodate cultural differences. An understanding to transcultural nursing theory can enhance the development and maintenance of a multicultural perspective. The use of Madeline Leininger's Culture Care modalities can assist staff in making culturally competent decisions and in implementing actions. This article will provide an overview of one community hospital's experiences in integrating a multicultural perspective to better meet the needs of specific patient populations.

  20. Determinant Factors for Managing Innovation in the Malaysian Public Sector

    Ab Rahman Zety Norhaiza

    2018-01-01

    Full Text Available Since 1991, the government has started the forces to encourage public sector to innovate in order to strengthen the capability and solve problems at workplace for the benefit of organization and its people. The focuses of this forces is to create value creation, encourage cost reduction, and provide services that meet aspirations and people's expectations through high impact ideas. However, to achieve these focuses, public sector faces few challenges that affect the management of innovation; which includes lack of leadership skills and poor innovative culture to stimulate innovation. Although there are various initiatives conducted to enhance the management innovation, the innovative performance is still less satisfactory. Therefore, this paper aims to discuss the determinant factors that affect managing innovation in the selected public sectors which consist of two categories; patron and executor agencies. Thematic approach was used to analyse the interview data. Findings from the interview suggested that in the organization, an employee especially a leader should show his full commitment towards innovative culture, he needs to be committed and supportive and communicate well with the employees and he also should provide attractive rewards to encourage the innovative culture for an effective management innovation. These determinant factors need to be considered as high significant for the public sector to develop new strategies or approaches in managing innovation towards sustaining their competitive advantages in a long term for the benefit of public.

  1. Partnership insurance: an innovation to meet long-term care financing needs in an era of federal minimalism.

    Meiners, Mark R; McKay, Hunter L; Mahoney, Kevin J

    2002-01-01

    In the case of long-term care financing, federal minimalism is not new news. Long-term care has long played a weak "third fiddle" to national health reform concerns about the uninsured and catastrophic expenditures on prescription drugs. The states have been left to struggle with the issue of long-term financing as part of their responsibilities in funding and administering the means-tested Medicaid program. Recently, the environment has become even more challenging. Much of what is on the national agenda for health and welfare reform has been delegated to the states. This "devolution" of responsibilities has created many competing priorities for both the attention and resources of states. This context of evolving federal minimalism calls for creative solutions that balance competing points of view. In this article, we provide some background and insights from one such effort: a collaboration between state governments and private insurers to put into operation an insurance-based approach to long-term care financing that uses Medicaid as an incentive to encourage potential purchasers.

  2. POSSIBILITIES FOR INNOVATIVE SCIENTIFIC APPROACH: INFORMATION VISUALIZATION AND EXPERIMENT IN INTELLIGENCE RESEARCH

    Dejan Ulcej

    2013-09-01

    Full Text Available In addition to universal social changes, the information revolution also brought a lot of innovation to the workings of intelligence services, which are traditionally the part of the national security system that is conducting data analyses and for which information is the primary product. If in the past the main problem and challenge has been the timely acquisition of data, today most agencies are faced with an entirely different problem - information overload. This problem is being tackled by technical as well as systemic measures that combine various types of intelligence work. However, there are still unanswered questions regarding the applicability of intelligence products for decision makers. Here we have to point out information visualization as the subject of an interdisciplinary scientific research that definitely shows a lot of potential in the context of the defense science as well. This article points out three key requirements that allow the application of information visualization to defense research: (1 the concept of the intelligence cycle can be used as a good basis for the information that is subject to visualization; (2 the quality of decision-making support information depends on proper visualization; (3 the first two requirements offer a stable theoretical and empirical basis for the introduction of innovative scientific methods in the field of defense science, such as experiments.

  3. An ISM Based Approach for Product Innovation Using a Synthesized Process

    Ming-Tang Wang

    2014-01-01

    Full Text Available Internet shopping has become a global business activity; it also increases the workload of delivery services. The Transnet logistics can easily deliver and collect cargos from everywhere, with difficulty of having the greatest efficiency. This study is composed of four parts; the first step of identifies opportunities in which proposing an auxiliary vehicle for Transnet truck to support service in narrow or crowded road. A weight calculation system determined the relative value of different items and applied the interpretive structural model (ISM to modularize SET for constructing innovation from integrated new product development (iNPD. From finding GAPs in opportunities of search results are explored an innovative light electric carrier as an auxiliary vehicle is determined. The second part consists of quantifying 21 items based upon 7 specific attributes for user orientation. The third part describes a new kind of light electric vehicle which is developed and mounted on the rear side of transport trucks; it can be used to deliver goods along narrow roads. Finally, more specific details of a collapsible electric motor carrier with a battery that is recharged using truck’s power system after using it are presented. The results of this study establish a research and product design to help Transnet drivers by improving carrying efficiency in narrow and crowded roads.

  4. INNOVATIVE APPROACHES TO RESEARCH METHODOLOGY OF SOCIAL RESPONSIBILITY IN THE FIELD OF RISK MANAGEMENT

    L. Volokhova

    2016-06-01

    Full Text Available The paper defines the role of insurance and risk management in corporate social responsibility. Analysed some of the social problems of certain sectors of the economy and the distribution of investments by insurance companies in a socially-oriented areas of the economy. The result of the analysis show that the problem of insurance and risk management should be directed to the development of innovative insurance products that would receive specific corporate social value by real locating investments. To better study on strategic risk - management must diversify and improve the traditionally accepted methodological tools. We consider the theory of positional feedback and corresponding IRT innovative model for analysis of complex, highly-defined characteristics of this sector. In order to determine a common objective evaluation system of corporate social responsibility for all companies emphasis on practical social benefits as measuring the effectiveness and success of socially responsible activities, the benefits that the company will receive from the decision of the social project. The proposed comprehensive system of indicators based insurance, which allows you to deepen the study of social responsibility in risk management strategies. The indicator system includes the following sections: 1. Navkolyshnye environment. 2. Local government (social security community. 3. Occupational Safety. 4. Internal corporate relations. 5. Equality. 6. Product Attributes. 7. Management. 8. The interest of business. 9. Liability business. 10. Socially responsible insurance. The comparative characteristic of the efficacy of social activity of companies and assess their socio-oriented activities for the previous ten years.

  5. Designing Class Activities to Meet Specific Core Training Competencies: A Developmental Approach

    Guth, Lorraine J.; McDonnell, Kelly A.

    2004-01-01

    This article presents a developmental model for designing and utilizing class activities to meet specific Association for Specialists in Group Work (ASGW) core training competencies for group workers. A review of the relevant literature about teaching group work and meeting core training standards is provided. The authors suggest a process by…

  6. Arctic System Science: Meeting Earth System and Social Impact Challenges through Integrative Approaches and Synthesis

    Vorosmarty, C. J.; Hinzman, L. D.; Rawlins, M. A.; Serreze, M. C.; Francis, J. A.; Liljedahl, A. K.; McDonald, K. C.; Piasecki, M.; Rich, R. H.; Holland, M. M.

    2017-12-01

    The Arctic is an integral part of the Earth system where multiple interactions unite its natural and human elements. Recent observations show the Arctic to be experiencing rapid and amplified signatures of global climate change. At the same time, the Arctic system's response to this broader forcing has itself become a central research topic, given its potential role as a critical throttle on future planetary dynamics. Changes are already impacting life systems and economic prosperity and continued change is expected to bear major implications far outside the region. We also have entered an era when environmental management, traditionally local in scope, must confront regional, whole biome, and pan-Arctic biogeophysical challenges. While challenges may appear to operate in isolation, they emerge within the context of an evolving, integrated Arctic system defined by interactions among natural and social sub-systems. Clearly, new efforts aimed at community planning, industrial development, and infrastructure construction must consider this multiplicity of interacting processes. We recently organized an "Arctic System Synthesis Workshop Series" supported by the Arctic Systems Science Program of NSF and devoted to exploring approaches capable of uncovering the systems-level behavior in both the natural and social sciences domains. The series featured two topical meetings. The first identified the sources responsible for extreme climate events in the Arctic. The second focused on multiple "currencies" within the system (i.e., water, energy, carbon, nutrients) and how they interact to produce systems-level behaviors. More than 40 experts participated, drawn from the ranks of Arctic natural and social sciences. We report here on the workshop series consensus report, which identifies a broad array of topics. Principal among these are a consideration of why study the Arctic as a system, as well as an articulation of the major systems-level approaches to support basic as well

  7. Strengthening regional innovation through network-based innovation brokering

    Svare, Helge; Gausdal, Anne Haugen

    2015-01-01

    The primary objective of this paper is to demonstrate how regional innovation system theory may be translated into manageable micro-level methods with the potential for strengthening the productive dynamics of a regional innovation system. The paper meets this objective by presenting network-based innovation brokering (NBIB), a practical method designed using insights from regional innovation system theory and trust theory. Five cases from two Norwegian regional innovation networks show that ...

  8. Crown-level tree species classification from AISA hyperspectral imagery using an innovative pixel-weighting approach

    Liu, Haijian; Wu, Changshan

    2018-06-01

    Crown-level tree species classification is a challenging task due to the spectral similarity among different tree species. Shadow, underlying objects, and other materials within a crown may decrease the purity of extracted crown spectra and further reduce classification accuracy. To address this problem, an innovative pixel-weighting approach was developed for tree species classification at the crown level. The method utilized high density discrete LiDAR data for individual tree delineation and Airborne Imaging Spectrometer for Applications (AISA) hyperspectral imagery for pure crown-scale spectra extraction. Specifically, three steps were included: 1) individual tree identification using LiDAR data, 2) pixel-weighted representative crown spectra calculation using hyperspectral imagery, with which pixel-based illuminated-leaf fractions estimated using a linear spectral mixture analysis (LSMA) were employed as weighted factors, and 3) representative spectra based tree species classification was performed through applying a support vector machine (SVM) approach. Analysis of results suggests that the developed pixel-weighting approach (OA = 82.12%, Kc = 0.74) performed better than treetop-based (OA = 70.86%, Kc = 0.58) and pixel-majority methods (OA = 72.26, Kc = 0.62) in terms of classification accuracy. McNemar tests indicated the differences in accuracy between pixel-weighting and treetop-based approaches as well as that between pixel-weighting and pixel-majority approaches were statistically significant.

  9. The Technology of Introduction of Innovation Methods of Management of Development of the Hotel and Restaurant Enterprises on the Basis of Synergistic Approach

    Davydova Oksana Yu.

    2018-02-01

    Full Text Available The article is aimed at formation of technology of introduction of innovation methods of management of development of hotel and restaurant enterprises on the basis of synergetic approach. The following evolutionary stages of innovative management of enterprises’ development are proposed: preliminary (conjugation; existing (relations and bifurcation; perspective (counterdifferentiation. The technology of introduction of innovation methods of management of development of enterprises of hotel-restaurant industry on the basis of synergistic approach has been developed, confirming existence of synergism in the system of increase of activity potential, opening of new directions of innovative management of development of hotel and restaurant enterprises. The indicators of synergistic effect are determined as follows: high level of performance indicators of enterprise of hotel-restaurant industry; adequate response to changes in the external and internal environment; adaptation to predictable and unpredictable crisis phenomena; improving the quality of products and services; creation and improvement of positive image in both internal and external markets, etc.

  10. Enterprise technology in support for accounting information systems. an innovation and productivity approach

    Jose Melchor Medina-Quintero

    2015-09-01

    Full Text Available Technology and the accounting information systems are implemented in an organization with the aim of improving their efficiency. Companies spend large amounts of money on these tools every year in order to improve their organizational performance. The aim of this research is to determine the influence of SMEs’ technological alignment, information management and technological infrastructure on the performance of an institution (innovation and productivity in which accounting information systems are used. An empirical study is conducted in enterprises belonging to the service, commercial and industrial sectors in Ciudad Victoria, México, with the help of the SmartPLS statistical tool. The results mainly show that technology has helped raise productivity (improvement in administrative activities, in decision-making and in the use of generated information.

  11. Innovative Approaches in Chronic Disease Management: Health Literacy Solutions and Opportunities for Research Validation.

    Villaire, Michael; Gonzalez, Diana Peña; Johnson, Kirby L

    2017-01-01

    This chapter discusses the need for innovative health literacy solutions to combat extensive chronic disease prevalence and costs. The authors explore the intersection of chronic disease management and health literacy. They provide specific examples of successful health literacy interventions for managing several highly prevalent chronic diseases. This is followed by suggestions on pairing research and practice to support effective disease management programs. In addition, the authors discuss strategies for collection and dissemination of knowledge gained from collaborations between researchers and practitioners. They identify current challenges specific to disseminating information from the health literacy field and offer potential solutions. The chapter concludes with a brief look at future directions and organizational opportunities to integrate health literacy practices to address the need for effective chronic disease management.

  12. On Innovation: A Theoretical Approach on the Challenges of Utilities Marketing

    Florina PÎNZARU

    2012-06-01

    Full Text Available One of the markets not long ago closed and completely regulated is now in the growing process of liberalization and deregulation: it is the utilities market we refer to (water, sewege, gas, electricity, waste collection. The deregulation of a market is usually followed by the appearance of competition expression conditions and, unassailably, the occurrence of specific marketing strategies. This paper investigates the specific of utilities marketing as it develops now, an bourgeoning domain, although with a rather discreet presence in this field’s theoretical analysis studies. Exploratory research on the analysis type products, promotional offers and communication of this market’s players shows an effervescent players practice, but also a continuous innovation necessary in a market where consumers are unfamiliar with bein persuaded by commercial means

  13. An innovative approach to synthesize highly-ordered TiO2 nanotubes.

    Isimjan, Tayirjan T; Yang, D Q; Rohani, Sohrab; Ray, Ajay K

    2011-02-01

    An innovative route to prepare highly-ordered and dimensionally controlled TiO2 nanotubes has been proposed using a mild sonication method. The nanotube arrays were prepared by the anodization of titanium in an electrolyte containing 3% NH4F and 5% H2O in glycerol. It is demonstrated that the TiO2 nanostructures has two layers: the top layer is TiO2 nanowire and underneath is well-ordered TiO2 nanotubes. The top layer can easily fall off and form nanowires bundles by implementing a mild sonication after a short annealing time. We found that the dimensions of the TiO2 nanotubes were only dependent on the anodizing condition. The proposed technique may be extended to fabricate reproducible well-ordered TiO2 nanotubes with large area on other metals.

  14. An Innovative Approach To Making Ultra Light Weight Wind Turbine Blades

    Suhail Zaki Farooqui

    2012-04-01

    Full Text Available An innovative mould free method for the fabrication of ultimate light weight small wind turbine blades made out of composites has been suggested in this paper. The method has been practically applied with very satisfactory results. The method is low cost and is specifically suitable for individual small wind turbine makers. The airfoils used are simple to shape and possess good Cl/Cd characteristics. The blades are crafted using galvanized iron sheets, aluminum pipes, hard paper and fiberglass. A computer program is included with tip correction features to design the blades at the required power rating, wind speed, tip speed ratio and the chosen constant angle of attack. Results of the program run for designing 250 and 500 watt wind turbine blades at 8 m/s wind speed and tip speed ratios of 5.5 are tabulated. Performance results of the blades thus produced are also discussed.

  15. The women in emergency medicine mentoring program: an innovative approach to mentoring.

    Welch, Julie L; Jimenez, Heather L; Walthall, Jennifer; Allen, Sheryl E

    2012-09-01

    Women in medicine report many gender-specific barriers to their career success and satisfaction, including a lack of mentors and role models. The literature calls for innovative strategies to enhance mentorship for women in medicine. To describe the content, perceived value, and ongoing achievements of a mentoring program for women in emergency medicine. The program offered mentoring for female faculty and residents in an academic emergency medicine department. Volunteers participated in group mentoring sessions using a mosaic of vertical and peer mentoring. Sessions focused on topics specific to women in medicine. An anonymous, electronic survey was sent to women who participated during 2004-2010 to assess the perceived value of the program and to collect qualitative feedback. Preliminary achievements fulfilling the program's goals were tracked. A total of 46 women (64%) completed the survey. The results showed a positive perceived value of the program (average, 4.65 on a 5-point Likert scale) in providing mentors and role models (4.41), in offering a supportive environment (4.39), in providing discussions pertinent to both personal (4.22) and professional development (4.22), while expanding networking opportunities (4.07). Notable achievements included work on the creation of a family leave policy, establishing lactation space, collaboration on projects, awards, and academic advancement. This innovative model for mentoring women is perceived as a valuable asset to the academic department and residency. It offers the unique combination of expanding a female mentor pool by recruiting alumni and using a mosaic of vertical and peer mentoring.

  16. The misappropriating of an innovation by Cameroonian learners: For a global and participative approach of the integration of ICTs in school

    Emmanuel BECHE

    2010-01-01

    Full Text Available This article studies how Cameroonian learners misappropriate prescribed uses within the context of an innovation. The methodology used is based on sociology of uses and on interview. The obtained results show that learners dispose strategies to reform the integration of ICTs in school. To allow an adapted school innovation, this work proposes an approach which takes into account both the utility and the acceptability of computer.

  17. Open Innovation Challenge in Healthcare. Role for Education.

    Dimitriu, Rodica; Lungeanu, Diana; Mãnescu, Cristina; Pantazi, Mirela; Mihalas, George I

    2015-01-01

    The vision of this paper is that collaboration creates new openings for engagement of non-commercial actors, such as universities, in innovation networks on the one hand, while opening up for collaborative innovation, and getting valuable real life anchors on the other hand, all these underpinned by greater connectivity and globalization. We present our approach in re-designing the courses on medical informatics and data processing to meet these challenges by employing public Internet services and media facilitation.

  18. High Demand, Core Geosciences, and Meeting the Challenges through Online Approaches

    Keane, Christopher; Leahy, P. Patrick; Houlton, Heather; Wilson, Carolyn

    2014-05-01

    As the geosciences has evolved over the last several decades, so too has undergraduate geoscience education, both from a standpoint of curriculum and educational experience. In the United States, we have been experiencing very strong growth in enrollments in geoscience, as well as employment demand for the last 7 years. That growth has been largely fueled by all aspects of the energy boom in the US, both from the energy production side and the environmental management side. Interestingly the portfolio of experiences and knowledge required are strongly congruent as evidenced from results of the American Geosciences Institute's National Geoscience Exit Survey. Likewise, the demand for new geoscientists in the US is outstripping even the nearly unprecedented growth in enrollments and degrees, which is calling into question the geosciences' inability to effectively reach into the largest growing segments of the U.S. College population - underrepresented minorities. We will also examine the results of the AGI Survey on Geoscience Online Learning and examine how the results of that survey are rectified with Peter Smith's "Middle Third" theory on "wasted talent" because of spatial, economic, and social dislocation. In particular, the geosciences are late to the online learning game in the United States and most faculty engaged in such activities are "lone wolves" in their department operating with little knowledge of the support structures that exist in such development. Yet the most cited barriers for faculty not engaging actively in online learning is the assertion that laboratory and field experiences will be lost and thus fight engaging in this medium. However, the survey shows that faculty are discovering novel approaches to address these issues, many of which have great application to enabling geoscience programs in the United States to meet the expanding demand for geoscience degrees.

  19. Meeting the latest qualification requirements for Class 1E protection system equipment: a practical approach

    Daigle, R.P.; Breen, R.J.

    1977-01-01

    The requirements for qualifying Class 1E equipment for Nuclear Power Generating Stations were significantly revised in 1974 and 1975. These new requirements reflect the desire of the industry to provide improved methods of determining the qualification of this vital equipment. The revised standards do, in fact, meet these industry goals in a generally acceptable manner. The Nuclear Regulatory Commission is presently requiring utilities to comply with these revised standards and regulatory guides in order to obtain the necessary permits. Manufacturers are developing and implementing programs to comply with the new requirements. One of the more difficult new requirements of qualification is aging to achieve advanced life condition. The objectives and methods described for aging are difficult for much of the equipment within the Protection System. The use of thermal and vibrational techniques to simulate aging is valid for some components (i.e., capacitors, transistors, cable and/or motor insulation) but may be neither valid nor practical for many items (e.g., complete instrument systems, etc.). A seemingly obvious approach, although rarely followed, in regarding new or revised standards is to refrain from making any type of commitment until the standards are thoroughly understood. Often too hasty a decision is made by a utility (concerned about licensing) or a manufacturer (concerned about being competitive) to commit to new requirements. Consequently, the broad range of interpretations that usually develops for a given set of requirements may result in difficult relations between organizations. This paper deals with solutions for qualification in a practical sense, with emphasis on the aging issue and does not elaborate on seismic qualification

  20. The World of the [open] innovator

    Maaike Kleinsmann; Janneke Sluijs; Rianne Valkenburg

    2011-01-01

    "The World of the [open] innovator" described the background of the revolution we are in in innovation and what the consequences are for innovation, changing towards design driven open innovation. We reframed innovation to meet new needs and values of companies and organizations in our work field.