WorldWideScience

Sample records for meeting final press

  1. Reducing VOC Press Emission from OSB Manufacturing; FINAL

    International Nuclear Information System (INIS)

    Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker

    2001-01-01

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board

  2. Final ITER CTA project board meeting

    International Nuclear Information System (INIS)

    Vlasenkov, V.

    2003-01-01

    The final ITER CTA Project Board Meeting (PB) took place in Barcelona, Spain on 8 December 2002. The PB took notes of the comments concerning the status of the International Team and the Participants Teams, including Dr. Aymar's report 'From ITER to a FUSION Power Reactor' and the assessment of the ITER project cost estimate

  3. Simulation of the Press Hardening Process and Prediction of the Final Mechanical Material Properties

    Science.gov (United States)

    Hochholdinger, Bernd; Hora, Pavel; Grass, Hannes; Lipp, Arnulf

    2011-08-01

    Press hardening is a well-established production process in the automotive industry today. The actual trend of this process technology points towards the manufacturing of parts with tailored properties. Since the knowledge of the mechanical properties of a structural part after forming and quenching is essential for the evaluation of for example the crash performance, an accurate as possible virtual assessment of the production process is more than ever necessary. In order to achieve this, the definition of reliable input parameters and boundary conditions for the thermo-mechanically coupled simulation of the process steps is required. One of the most important input parameters, especially regarding the final properties of the quenched material, is the contact heat transfer coefficient (IHTC). The CHTC depends on the effective pressure or the gap distance between part and tool. The CHTC at different contact pressures and gap distances is determined through inverse parameter identification. Furthermore a simulation strategy for the subsequent steps of the press hardening process as well as adequate modeling approaches for part and tools are discussed. For the prediction of the yield curves of the material after press hardening a phenomenological model is presented. This model requires the knowledge of the microstructure within the part. By post processing the nodal temperature history with a CCT diagram the quantitative distribution of the phase fractions martensite, bainite, ferrite and pearlite after press hardening is determined. The model itself is based on a Hockett-Sherby approach with the Hockett-Sherby parameters being defined in function of the phase fractions and a characteristic cooling rate.

  4. Regional Disease Surveillance Meeting - Final Paper

    Energy Technology Data Exchange (ETDEWEB)

    Lesperance, Ann M.; Mahy, Heidi A.

    2006-08-08

    On June 1, 2006, public health officials working in surveillance, epidemiological modeling, and information technology communities from the Seattle/Tacoma area and State of Washington met with members of the Pacific Northwest National Laboratory (PNNL) to discuss the current state of disease surveillance and gaps and needs to improve the current systems. The meeting also included a discussion of PNNL initiatives that might be appropriate to enhance disease surveillance and the current tools being used for disease surveillance. Participants broke out into two groups to identify critical gaps and needs for improving a surveillance system, and discuss the requirements for developing improved surveillance. Each group developed a list of key priorities summarizing the requirements for improved surveillance. The objective of this meeting was to work towards the development of an improved disease surveillance system.

  5. Final Report of the Final Meeting of Project Coordinators

    International Nuclear Information System (INIS)

    Cordero Calderon, Carlos F.

    1996-06-01

    The Costa Rican Electricity Institute has always been worried of the verification of the good state of the works and thus to guarantee their operation. For that reason, it has established different sorts of auscultation of the Arenal's Dam. Some investigations have been done to find new methods to improve and to eliminate risks in different works or projects. The Arenal's Dam is one of the greatest engineering works in Costa Rica, it has the Arenal, Corobici and Sandillal Hydroelectric Plants. Furthermore, the irrigation system in the Tempisque River Valley, in the Guanacaste province. One special characteristic of the Site of the Dam, is the near location of the Arenal Volcano, in full activity and located at 6 Km. from the dam. This report has two goals, one is the traditional permanent measurements report for the project, and the other, is to present it as a final work of the Project Arcal XVIII, to the International Atomic Energy Agency. This report analyses the geo-hydraulic, structural and topographic auscultation, as well as the activities accomplished during the ARCAL XVIII /8/018, Application of Tracer Techniques for Leakage in Dams and Damming Project, based on information gathered through the geo-chemical auscultation, until June 1996. (author).30 ills., 80 charts, 35 tabs

  6. The effect of initial microstructure on the final properties of press hardened 22MnB5 steels

    Energy Technology Data Exchange (ETDEWEB)

    Järvinen, Henri, E-mail: henri.jarvinen@tut.fi [Department of Materials Science, Tampere University of Technology, P.O.Box 589, FI-33101 Tampere (Finland); Isakov, Matti; Nyyssönen, Tuomo [Department of Materials Science, Tampere University of Technology, P.O.Box 589, FI-33101 Tampere (Finland); Järvenpää, Martti [SSAB Europe Oy, Harvialantie 420, FI-13300 Hämeenlinna (Finland); Peura, Pasi [Department of Materials Science, Tampere University of Technology, P.O.Box 589, FI-33101 Tampere (Finland)

    2016-10-31

    This paper addresses the relationship between initial microstructure and final properties of press hardened 22MnB5 steels. Four commercial 22MnB5 steels having different initial microstructures were investigated. An experimental press hardening equipment with a flat-die was used to investigate material behavior in the direct press hardening process. Two austenitizing treatments, 450 s and 180 s at 900 °C, were examined. Microstructural characterization with optical and scanning electron microscopes revealed a mixture of martensite and auto-tempered martensite after press hardening. Electron backscatter diffraction data of the transformed martensite was used to reconstruct grain boundary maps of parent austenite. Grain sizes of parent austenite (mean linear intercept) were measured for each material. In addition to microstructural evaluation, quasistatic and high strain rate tensile tests at strain rates of 5×10{sup −4} s{sup −1} and 400 s{sup −1}, respectively, were performed for press hardened samples. The results show that strength and uniform elongation depend on the initial microstructure of the 22MnB5 steel, when parameters typical to the direct press hardening process are used. Parent austenite grain size was shown to influence the morphology of the transformed martensite, which in turn affects the strength and uniform elongation after press hardening. The tensile properties of the press hardened materials are almost strain rate independent in the studied strain rate range. The obtained results can be used to optimize the properties of 22MnB5 steels in the direct press hardening process. In addition, the here revealed connection between the parent austenite grain size and final steel properties should be taken into account in the development of new press hardening steel grades for automotive industry.

  7. The effect of initial microstructure on the final properties of press hardened 22MnB5 steels

    International Nuclear Information System (INIS)

    Järvinen, Henri; Isakov, Matti; Nyyssönen, Tuomo; Järvenpää, Martti; Peura, Pasi

    2016-01-01

    This paper addresses the relationship between initial microstructure and final properties of press hardened 22MnB5 steels. Four commercial 22MnB5 steels having different initial microstructures were investigated. An experimental press hardening equipment with a flat-die was used to investigate material behavior in the direct press hardening process. Two austenitizing treatments, 450 s and 180 s at 900 °C, were examined. Microstructural characterization with optical and scanning electron microscopes revealed a mixture of martensite and auto-tempered martensite after press hardening. Electron backscatter diffraction data of the transformed martensite was used to reconstruct grain boundary maps of parent austenite. Grain sizes of parent austenite (mean linear intercept) were measured for each material. In addition to microstructural evaluation, quasistatic and high strain rate tensile tests at strain rates of 5×10 −4 s −1 and 400 s −1 , respectively, were performed for press hardened samples. The results show that strength and uniform elongation depend on the initial microstructure of the 22MnB5 steel, when parameters typical to the direct press hardening process are used. Parent austenite grain size was shown to influence the morphology of the transformed martensite, which in turn affects the strength and uniform elongation after press hardening. The tensile properties of the press hardened materials are almost strain rate independent in the studied strain rate range. The obtained results can be used to optimize the properties of 22MnB5 steels in the direct press hardening process. In addition, the here revealed connection between the parent austenite grain size and final steel properties should be taken into account in the development of new press hardening steel grades for automotive industry.

  8. Repercussão da pressão positiva expiratória final na pressão de perfusão cerebral em pacientes adultos com acidente vascular hemorrágico

    OpenAIRE

    Lima,Wildberg Alencar; Campelo,Antônio Roberto Leite; Gomes,Rodrigo Luís Mousinho; Brandão,Daniella Cunha

    2011-01-01

    A pressão positiva intratorácica pode levar a alterações hemodinâmicas com repercussão no compartimento intracraniano, alterando a pressão intracraniana e a pressão de perfusão cerebral. Esse efeito pode se tornar mais intenso quando utilizados elevados valores de pressão positiva expiratória final. OBJETIVO: Medir o impacto que diferentes valores de pressão positiva expiratória final causam na pressão intracraniana, na pressão de perfusão cerebral e pressão arterial média. MÉTODO: O estudo f...

  9. Press Meeting 20 January 2003: First Light for Europe's Virtual Observatory

    Science.gov (United States)

    2002-12-01

    Video News Release 11:40 Demonstration of the AVO prototype, Nicholas Walton (University of Cambridge) 12:00 Q&A, including interview possibilities with the scientists 12:30-13:45 Buffet lunch, including individual hands-on demos 14:00 Science Demo (also open to interested journalists) For more information about Virtual Observatories and the AVO, see the website or the explanation below. Notes to editors The AVO involves several partner organisations led by the European Southern Observatory (ESO). The other partner organisations are the European Space Agency (ESA), AstroGrid (funded by PPARC as part of the UK's E-Science programme), the CNRS-supported Centre de Données Astronomiques de Strasbourg (CDS), the University Louis Pasteur in Strasbourg, France, the CNRS-supported TERAPIX astronomical data centre at the Institut d'Astrophysique in Paris, France, and the Jodrell Bank Observatory of the Victoria University of Manchester, United Kingdom. Note [1]: This is a joint Press Release issued by the European Southern Observatory (ESO), the Hubble European Space Agency Information Centre, AstroGrid, CDS, TERAPIX/CNRS and the University of Manchester. Science Contacts Peter J. Quinn European Southern Observatory (ESO) Garching, Germany Tel: +49-89-3200 -6509 email: pjq@eso.org Phil Diamond University of Manchester/Jodrell Bank Observatory United Kingdom Tel: +44-147-757-26-25 (0147 in the United Kingdom) email: pdiamond@jb.man.ac.uk Press contacts Ian Morison University of Manchester/Jodrell Bank Observatory United Kingdom Tel: +44-147-757-26-10 (0147 in the United Kingdom) E-mail: email: im@jb.man.ac.uk Lars Lindberg Christensen Hubble European Space Agency Information Centre Garching, Germany Tel: +49-89-3200-6306 (089 in Germany) Cellular (24 hr): +49-173-3872-621 (0173 in Germany) email: lars@eso.org Richard West (ESO EPR Dept.) ESO EPR Dept. Garching, Germany Phone: +49-89-3200-6276 email: rwest@eso.org Background information What is a Virtual Observatory? - A short

  10. [Effect of ceramic thickness and resin cement shades on final color of heat-pressed ceramic veneers].

    Science.gov (United States)

    Ren, D F; Zhan, K R; Chen, X D; Xing, W Z

    2017-02-09

    Objective: To analyze the effect of ceramic materials thickness and resin cement shades on the final color of ceramic veneers in the discolored teeth, and to investigate the color agreement of try-in pastes to the corresponding resin cements. Methods: Sixty artificial maxillary central incisor teeth (C2 shade) were used to simulate the natural discolored teeth and prepared according to veneer tooth preparation protocol. Veneers of different thickness in the body region (0.50 and 0.75 mm) were fabricated using ceramic materials (LT A2 shade, IPS e.max Press). The ceramic veneer specimens were bonded to the artificial teeth using the 6 shades of resin cements (Variolink Veneer: shades of LV-3, LV-2, HV+3; RelyX™ Veneer: shades of TR, A3, WO) ( n= 5). A clinical spectrophotometer was used to measure the color parameters of ceramic veneers at the cervical, body and incisal regions. Color changes of veneers before and after cementation were calculated and registered as ΔE1, and the changes between try-in paste and the corresponding resin cements were registered as ΔE2. Results: Three-way ANOVA indicated that ΔE1 and ΔE2 values were significantly affected by the ceramic thickness, resin cement shades and measuring regions ( Pceramic veneers were cemented with resin cements in shades of HV+3 and WO. The ΔE2 values of six shades ranged from 0.60-2.56. The shades of HV+3, WO and A3 resin cements were more than 1.60. Conclusions: Different thickness of ceramic materials, resin cement shades and measuring regions could affect the final color of ceramic veneers. The color differences of some resin cements and corresponding try-in pastes might be observed in clinical practice.

  11. International production versus global competition. Bosch`s business area `water heating systems` meets the press; International im globalen Wettbewerb. Bosch Geschaeftsbereich Thermotechnik stellt sich der Fachpresse vor

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1996-08-01

    The business area `water heating systems` has developed into an internationally operating enterprise of the Bosch group. Its factories are distributed over seven countries: Junkers at Wernau (Germany), Worcester at Worcester (Great Britain), Radson at Houthalen (Belgium), Vulcano at Aveiro (Portugal), e.I.m. leblanc at Drancy and Brest (France) and at Lecong (PR China).- The article reports impressions gathered at a meeting of representatives of the technical press, organized by Bosch Thermotechnik at Aveiro, Portugal. This colloquy in a European site of production enabled representatives of the press to inform themselves on the spot on the internationality of the enterprise. (orig.) [Deutsch] Der Geschaeftsbereich Thermotechnik hat sich zu einem international operierenden Unternehmen der Bosch-Gruppe entwickelt. In sieben Laendern hat er Fertigungsstaetten, Junkers in Wernau (D), Worcester in Worcester (GB), Radson in Houthalen (B), Vulcano in Aveiro (P), e.l.m. Leblanc in Drancy und Brest (F) und in Lecong (VR China). Im folgenden wird ueber Eindruecke aus einem Fachpresse-Kolloquium berichtet, zu dem Bosch Thermotechnik Fachpressevertreter nach Aveiro in Portugal eingeladen hatte. Es fand also an einem der europaeischen Standorte statt, so dass sich die Pressevertreter vor Ort ein konkretes Bild zum Thema `Internationalitaet` verschaffen konnten. (orig.)

  12. Communication dated 29 June 2009 received from the Permanent Mission of Kazakhstan with regard to a press release to note a commemorative meeting of the 20th anniversary of shutting down of the Semipalatinsk nuclear testing site

    International Nuclear Information System (INIS)

    2009-01-01

    The Secretariat has received a Note Verbale dated 29 June 2009 from the Permanent Mission of Kazakhstan, transmitting the text of a press release to note a commemorative meeting of the 20th anniversary of shutting down of the Semipalatinsk nuclear testing site, which was held in Semipalatinsk, Kazakhstan on 18 June 2009. As requested in that communication, the abovementioned press release is herewith circulated for the information of all Member States

  13. Summary report of the final technical meeting on 'International Reactor Dosimetry File: IRDF-2002'

    International Nuclear Information System (INIS)

    Griffin, Patrick J.; Paviotti-Corcuera, R.

    2003-10-01

    Presentations, recommendations and conclusions of the Final Technical Meeting on 'International Reactor Dosimetry File: IRDF-2002' are summarized in this report. The main aims of this meeting were to discuss scientific and technical matters related to reactor dosimetry and to assign responsibilities for the preparation of the final version of the IRDF- 2002 library and the associated TECDOC. Tasks were assigned and deadlines were agreed. Participants emphasized that accurate and complete nuclear data for reactor dosimetry are essential to improve the assessment accuracies for reactor pressure vessel service lifetimes in nuclear power plants, as well as for other neutron metrology applications such as boron neutron capture therapy, therapeutic use of medical isotopes, nuclear physics measurements, and reactor safety applications. (author)

  14. Tritium inventory in fusion reactors. Summary report of the final research coordination meeting

    International Nuclear Information System (INIS)

    Clark, R.E.H.

    2007-11-01

    Detailed discussions were held during the final Research Coordination Meeting (RCM) at IAEA Headquarters on 25-27 September 2006, with the aim of reviewing the work accomplished by the Coordinated Research Project (CRP) on 'Tritium Inventory in Fusion Reactors'. Participants summarized the specific results obtained during the final phase of the CRP, and considered the impact of the data generated on the design of fusion devices. Conclusions were formulated and several specific recommendations for future fusion machines were agreed. The discussions, conclusions and recommendations of the RCM are briefly described in this report. (author)

  15. Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties

    Science.gov (United States)

    García-Junceda, A.; Rincón, M.; Torralba, J. M.

    2018-01-01

    The feasibility of processing duplex stainless steels with promising properties using a powder metallurgical route, including the consolidation by field-assisted hot pressing, is assessed in this investigation. The influence of the particle size and morphology of the raw austenitic and ferritic powders on the final microstructure and properties is also evaluated for an austenitic content of 60 wt pct. In addition, the properties of a new microconstituent generated between the initial constituents are analyzed. The maximum sintered density (98.9 pct) and the best mechanical behavior, in terms of elastic modulus, nanohardness, yield strength, ultimate tensile strength, and ductility, are reached by the duplex stainless steel processed with austenitic and ferritic gas atomized stainless steel powders.

  16. Press Oil Final Release Survey

    Energy Technology Data Exchange (ETDEWEB)

    Whicker, Jeffrey Jay [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ruedig, Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-11

    There are forty-eight 55 gallon barrels filled with hydraulic oil that are candidates for release and recycle. This oil needs to be characterized prior to release. Principles of sampling as provided in MARSAME/MARSSIM approaches were used as guidance for sampling.

  17. Management of water hyacinth: Final meeting and international conference. Working paper submitted by the Regional Coordinator

    International Nuclear Information System (INIS)

    1981-01-01

    Full text: Final Meeting. This meeting will essentially make a terminal review of the project and register final records of work done on the various aspects, such as: - biology of the plant; - biological control; - biogas; - wastewater treatment; - papers and boards; - integrated systems, etc. We should have at the meeting a complete account of the work done in the project under each of the above headings. For example, under 'biogas' we should prepare one consolidated account of work carried out in all the three participating countries rather than individual country reports. Likewise on 'papers and boards', and the other items. To enable preparation of reports in this form there should naturally be prior consultations and contacts among the concerned investigators by correspondence and, if necessary, personal visits. These reports will then be edited and compiled by the Regional Coordinator in the form of a book or monograph on the Management of Water Hyacinth project as a whole. Contributors to chapters will be cited. International Conference. Independent of the consolidated reports, national coordinators may prepare papers for presentation at the proposed international conference. These papers could be prepared m the usual form and style for publication in international scientific journals. Although several papers could be prepared out of work done by us, we may consider the desirability of limiting the number, in order to give adequate opportunities for the other invited participants to the conference. There would be no bar on publication of these scientific papers after the conference in appropriate journals irrespective of whether a separate volume on proceedings of the conference is brought out or not. India would be happy to host the terminal review meeting to be followed by the conference. The likely period would be last week of January to first week in February, 1983. (author)

  18. Fourth natural analogue working group meeting and Pocos de Caldas project final workshop

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1991-01-01

    The fourth meeting of the CEC-sponsored natural analogue working group (NAWG) was held in Pitlochry, Scotland, from 18 to 22 June 1990, and also included the final workshop of the Pocos de Caldas (Brazil) natural analogue project, sponsored by Nagra (CH), SKB (S) UK-DOE and US-DOE. About 80 specialists attended this meeting, originating from EC Member States and also Australia, Brazil, Canada, Finland, Japan, Sweden, Switzerland and the USA. The IAEA and OCDE-NEA were also represented. This plenary meeting was the opportunity to review and discuss five years of progress and activities of natural analogues in central areas of performance assessment: waste forms and engineered barriers, geochemistry and radionuclide speciation, radionuclide migration and the overall geological context of radwaste disposal. In addition, a feedback session provided the opportunity for regulators and those individuals who had advisory roles to give their views and impressions on the significance of natural analogue research. These proceedings, divided into two sessions, contain 32 technical papers and 14 abstracts of published papers

  19. Press Start

    Science.gov (United States)

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  20. Nuclear research centres in the 21st century. Final report of a meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-11-01

    millennium attention was focused, in many areas, on changing times. In the field of nuclear technology, there were a number of major conferences addressing this issue. While the technology issue was discussed in these conferences, the general issues relating to NRCs were not the subject of discussion at any forum. To focus on these issues senior managers of nuclear research centres from 25 Member States were invited for an exchange of ideas regarding: orientation of the programmes of NRCs in the current environment; challenges faced by NRCs; interaction of NRCs with their governments, industry, academia and public; ways in which mutual collaboration could be used to enhance the technology; the possible role of the IAEA in this respect. Accordingly, the scope of the meeting was defined as follows: past and present situation of NRCs (R and D programmes and the related finances, manpower and infrastructure, strengths and limitations); challenges faced by NRCs (New directions, examples of successful orientation preservation of expertise); interaction of NRCs with their environment (social and economic sector, academia, public); collaboration and co-operation (North-South and South-South, IAEA role); and other issues considered relevant. All participants gave their country's views on these and related topics. There was extensive discussion on the subjects. The sections of the report giving highlights of presentations, summaries of discussions and recommendations were finalized at the meeting. The 44th General Conference of the IAEA passed a resolution (GC(44)/RES/23) which calls for strengthening co-operation between nuclear research centres in the area of the peaceful applications of nuclear technology. This resolution reaffirms the recommendations of the meeting. The Member States and the IAEA will now explore ways in which this co-operation can be strengthened. In the 2002-2003 Programme and Budget cycle the IAEA has also initiated a sub-programme on Management and

  1. Nuclear research centres in the 21st century. Final report of a meeting

    International Nuclear Information System (INIS)

    2001-11-01

    millennium attention was focused, in many areas, on changing times. In the field of nuclear technology, there were a number of major conferences addressing this issue. While the technology issue was discussed in these conferences, the general issues relating to NRCs were not the subject of discussion at any forum. To focus on these issues senior managers of nuclear research centres from 25 Member States were invited for an exchange of ideas regarding: orientation of the programmes of NRCs in the current environment; challenges faced by NRCs; interaction of NRCs with their governments, industry, academia and public; ways in which mutual collaboration could be used to enhance the technology; the possible role of the IAEA in this respect. Accordingly, the scope of the meeting was defined as follows: past and present situation of NRCs (R and D programmes and the related finances, manpower and infrastructure, strengths and limitations); challenges faced by NRCs (New directions, examples of successful orientation preservation of expertise); interaction of NRCs with their environment (social and economic sector, academia, public); collaboration and co-operation (North-South and South-South, IAEA role); and other issues considered relevant. All participants gave their country's views on these and related topics. There was extensive discussion on the subjects. The sections of the report giving highlights of presentations, summaries of discussions and recommendations were finalized at the meeting. The 44th General Conference of the IAEA passed a resolution (GC(44)/RES/23) which calls for strengthening co-operation between nuclear research centres in the area of the peaceful applications of nuclear technology. This resolution reaffirms the recommendations of the meeting. The Member States and the IAEA will now explore ways in which this co-operation can be strengthened. In the 2002-2003 Programme and Budget cycle the IAEA has also initiated a sub-programme on Management and

  2. Progress in hot pressing

    International Nuclear Information System (INIS)

    Brodhag, C.; Thevenot, F.

    1988-01-01

    An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC

  3. Isotopic assessment of long term groundwater exploitation. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2006-10-01

    The stress imposed on the available water resources due to man's impact (exploitation, release of pollutants and agricultural practices) has resulted in depletion of the available reserves as well as deterioration of water quality in many parts of the world. Over wide areas, abstractions are exceeding current natural recharge and it is apparent from scientific studies that these water resources are being mined, especially in arid and semi-arid areas. Sustainable development and management of those water resources needs long term monitoring records to understand the changes and dynamic responses due to the exploitation. These proceedings provide a synthesis of a series of hydrochemical, isotope and geohydrological data sets which will be used for quantitative assessment of the long term dynamic response of the groundwater system. The results show that both stable and radioactive isotopes are excellent tools for characterizing and understanding aquifer systems that are undergoing long term exploitation. Specific outcomes include establishment of methodologies for monitoring and predicting changes in water quality and quantity that will lead to improved water resources management. This publication is a summary of the results achieved during the coordinated research project (CRP) and the various studies performed by the participating institutions are presented as individual presentations. The overall achievements are presented as an executive summary, and the detailed findings are presented in each contribution. These results were presented in the final coordination meeting held in Vienna, 12-16 May 2003. The results obtained from this CRP will be used to improve the predictions of future behaviour of groundwater resources in response to exploitation. The scientific component of this CRP will be a valuable source of information for isotope hydrologists involved in isotope field applications and a useful guide for groundwater managers involved in groundwater resources

  4. Relaciones con los medios a finales del siglo XIX: antecedentes de los comunicados de prensa en la prensa malagueña / Media relations in the late nineteenth century: press releases in the malacitan press

    Directory of Open Access Journals (Sweden)

    Jesús REINA-ESTÉVEZ

    2015-01-01

    Full Text Available La presente investigación trata de rastrear algunos antecedentes de comunicados de prensa y otros instrumentos de comunicación empresarial en la prensa malagueña de finales del siglo XIX. Para obtener los resultados se aplica el método del análisis de contenido sobre las comunicaciones que el periódico La Unión Mercantil (1886-1936 publicó en las secciones específicas: comunicado, remitido, circulares y avisos, en el periodo comprendido entre su nacimiento en 1886 y el comienzo del conflicto bélico cubano a principios de 1895. Los ejemplares digitalizados del diario se hallan disponibles online para su consulta en la página web del Archivo Narciso Díaz de Escovar, con la excepción del año 1892, cuya colección ha desaparecido casi por completo. Se logran obtener 400 resultados válidos, que se analizan según criterios de autoría y origen, objetivos de comunicación, y fuentes mencionadas. Este trabajo inicia una línea de debate casi desconocida en España, dada la falta de investigaciones monográficas de periódicos esenciales para la historia del periodismo en nuestro país, a nivel técnico y de contenido, a la vez que incide en la búsqueda de antecedentes de relaciones públicas antes del inicio oficial de la disciplina mediados los años sesenta del siglo XX.

  5. Combination processes for food irradiation. Proceedings of the final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-01-01

    -ordination Meeting (RCM) to formulate the programme of work for the entire duration of this CRP was convened in Strasbourg, France, in March 1991. The preliminary results of the CRP were reviewed at an RCM held at St. Hyacinth, Quebec, Canada, in June 1993. The final RCM was convened at the University of Pretoria, Pretoria, South Africa, from 27 February to 3 March 1995, to review the results of the work carried out under the scope of this CRP

  6. Effects of internal gas pressure and microstructure on the mechanisms of hot-pressing and swelling in ceramics. Final report, June 1, 1979-May 31, 1980

    International Nuclear Information System (INIS)

    Solomon, A.A.

    1980-08-01

    The results of the study of the effects of internal and external gas pressures on ceramics are summarized. The new experimental systems for studying these phenomena are described. The study has shown that the rate of volume change in ZnO is linearly related to the total pressure driving force. Swelling and hot-pressing can be described on a consistent basis in terms of this driving force. For ZnO, Ni and UO 2 the rate of volume change is dependent on bulk diffusion. The porosity evolution during swelling is described and the resintering phenomenon is identified. Various models for pore growth and shrinkage are considered and related to the behavior of the different systems

  7. [Perfusion imaging: Instrumentation, modeling, and radiopharmaceuticals: Report of the scientific meeting: Final technical report

    International Nuclear Information System (INIS)

    Graham, M.M.

    1987-01-01

    This meeting provided an excellent overview of the state-of-the-art in perfusion imaging from the viewpoints of mathematical data analysis, radiochemical synthesis and evaluation, and instrumentation physics. The participants and audience had an opportunity to see how each of these aspects is essential for continued progress in this field

  8. Meeting

    Indian Academy of Sciences (India)

    July 1989 No.19 Newsletter of the Indian Academy of Sciences. 55th Annual. Meeting ... in the world, keeping alive atthe same time his research interests, abreast .... theory made a comeback with many new ideas and with the success of the ...

  9. 2008 annual meeting on nuclear technology: topical sessions. Pt. 2. Construction of the final repository KONRAD

    International Nuclear Information System (INIS)

    Broeskamp, H.

    2008-01-01

    Summary report by Dipl.-Ing. Holger Broeskamp on the Topical Session ''Constructing the Final Repository KONRAD'' of the Annual Conference on Nuclear Technology held in Hamburg, May 27-29, 2008. (orig.)

  10. RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2016-02-01

    Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.

  11. Atomic data for heavy element impurities in fusion reactors. Summary report of the final research coordination meeting

    International Nuclear Information System (INIS)

    Clark, R.E.H.

    2009-04-01

    Eleven experts on the properties of heavy elements of relevance to fusion energy research attended the final Research Coordination Meeting (RCM) on Data for Heavy Element Impurities in Fusion Reactors, held at IAEA Headquarters on 4-6 March 2009. Participants summarized their accomplishments with respect to the revised work plan formulated at the second RCM. The overall work plan for the CRP was assessed and reviewed in detail, and achievements were noted. Discussions, conclusions and recommendations of the RCM are briefly described in this report. (author)

  12. Convenio "Andres Bello:" Informe Final [de la] Segunda Reunion de Ministros de Educacion de la Region Andina ("Andres Bello" Agreement: Final Report of the Second Meeting of the Andean Region Ministers of Education).

    Science.gov (United States)

    Ministros de Educacion de la Region Andina, Lima (Peru).

    This final report of the second meeting of the Andean Region Ministers of Education subscribing to the Andres Bello Agreement on education and culture contains a resume of the individual sessions and the proposals approved during that meeting. The proposals cover various educational problems and issues and begin with the Declaration of Lima which…

  13. Regional Meeting of Experts on Environmental Education in Africa, Brazzaville, People's Republic of the Congo, 11-16 September 1976. Final Report.

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Environmental Education Section.

    This is the final report on the background and proceedings of the Regional Meeting of Experts on Environmental Education in Africa, convened by UNESCO with the collaboration of the University of Brazzaville. This meeting was one of five similar ones held throughout the world as a follow-up to the UNESCO Conference held in Belgrade, Yugoslavia.…

  14. Spectroscopic and Collisional Data for Tungsten from 1 eV to 20 keV. Summary Report of the Final Research Coordination Meeting

    International Nuclear Information System (INIS)

    Chung, H.-K.; Beiersdorfer, P.; Müller, A.; Ralchenko, Yu.; Braams, B. J.

    2014-12-01

    The final Research Coordination Meeting of a coordinated research project (CRP) on spectroscopic and collisional data for tungsten ions in fusion plasma was held at IAEA Headquarters with 17 external experts representing 14 research groups and staff from the International Atomic Energy Agency. Participants summarized their research during the CRP and made plans for a final report. The proceedings and conclusions of the meeting are summarized here. (author)

  15. Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ``Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke``, was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs.

  16. A novel Fe–Cr–Nb matrix composite containing the TiB_2 neutron absorber synthesized by mechanical alloying and final hot isostatic pressing (HIP) in the Ti-tubing

    International Nuclear Information System (INIS)

    Litwa, Przemysław; Perkowski, Krzysztof; Zasada, Dariusz; Kobus, Izabela; Konopka, Gustaw; Czujko, Tomasz; Varin, Robert A.

    2016-01-01

    The Fe–Cr–Ti-Nb elemental powders were mechanically alloyed/ball milled with TiB_2 and a small quantity of Y_2O_3 ceramic to synthesize a novel Fe-based alloy-ceramic powder composite that could be processed by hot isostatic pressing (HIP) for a perceived potential application as a neutron absorber in nuclear reactors. After ball milling for the 30–80 h duration relatively uniform powders with micrometric sizes were produced. With increasing milling time a fraction of TiB_2 particles became covered with the much softer Fe-based alloy which resulted in the formation of a characteristic “core-mantel” structure. For the final HIP-ing process the mechanically alloyed powders were initially uniaxially pressed into rod-shaped compacts and then cold isostatically pressed (CIP-ed). Subsequently, the rod-shaped compacts were placed in the Ti-tubing and subjected to hot isostatic pressing (HIP) at 1150 °C/200 MPa pressure. The HIP-ing process resulted in the formation of the near-Ti and intermediate diffusional layers in the microstructure of HIP-ed samples which formed in accord with the Fe-Ti binary phase diagram. Those layers contain the phases such as α-Ti (HCP), the FeTi intermetallic and their hypo-eutectoid mixtures. In addition, needle-like particles were formed in both layers in accord with the Ti-B binary phase diagram. Nanohardness testing, using a Berkovich type diamond tip, shows that the nanohardness in the intermediate layer areas, corresponding to the composition of the hypo-eutectoid mixture of Ti-FeTi, equals 980.0 (±27.1) HV and correspondingly 1176.9 (±47.6) HV for the FeTi phase. The nanohardness in the sample's center in the areas with the fine mixture of Fe-based alloy and small TiB_2 particles equals 1048.3 (±201.8) HV. The average microhardness of samples HIP-ed from powders milled for 30 and 80 h is 588 HV and 733 HV, respectively. - Highlights: • A Fe–Cr–Nb-based composite with TiB_2 neutron absorbing ceramic was mechanically

  17. News/Press Releases

    Data.gov (United States)

    Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

  18. Reciprocating pellet press

    Science.gov (United States)

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  19. The Global University Press

    Science.gov (United States)

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  20. The final cut: cell polarity meets cytokinesis at the bud neck in S. cerevisiae.

    Science.gov (United States)

    Juanes, Maria Angeles; Piatti, Simonetta

    2016-08-01

    Cell division is a fundamental but complex process that gives rise to two daughter cells. It includes an ordered set of events, altogether called "the cell cycle", that culminate with cytokinesis, the final stage of mitosis leading to the physical separation of the two daughter cells. Symmetric cell division equally partitions cellular components between the two daughter cells, which are therefore identical to one another and often share the same fate. In many cases, however, cell division is asymmetrical and generates two daughter cells that differ in specific protein inheritance, cell size, or developmental potential. The budding yeast Saccharomyces cerevisiae has proven to be an excellent system to investigate the molecular mechanisms governing asymmetric cell division and cytokinesis. Budding yeast is highly polarized during the cell cycle and divides asymmetrically, producing two cells with distinct sizes and fates. Many components of the machinery establishing cell polarization during budding are relocalized to the division site (i.e., the bud neck) for cytokinesis. In this review we recapitulate how budding yeast cells undergo polarized processes at the bud neck for cell division.

  1. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2010-01-01

    The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.

  2. Use of isotope techniques in lake dynamics investigations. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-03-01

    The Co-ordinated Research Programme (CRP) on the Use of Isotope Techniques in Lake Dynamics Investigations was launched with the aim of assessing the potential of environmental isotope techniques in studying the dynamics of surface water bodies and related problems such as: dynamics of solutes; sediment focusing; establishment of water balance components; vulnerability to pollution. The CRP enabled a number of isotope and geochemical studies to be carried out on small and large water bodies, with the general aim of understanding of the dynamics of these systems under the growing anthropogenic influence. This publication is a compilation of the papers presented at the final Research Co-ordination Meeting (RCM) held in Rehovot, Israel, from 10 to 13 March 1997. Individual contributions have been indexed separately

  3. Isotope based assessment of groundwater renewal in water scarce regions. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-10-01

    The isotopic composition and chemical constituents of water infiltrating through the soil zone (unsaturated zone, or zone of aeration) into groundwater can be employed to determine the moisture transport in the unsaturated zone, thus enabling estimation of the water infiltration rate to the underlying aquifer. This was the basis on which this CRP was initiated in 1996. The overall results obtained from three years of applied field research related to study of moisture transport dynamics and estimation of natural recharge through use of isotope/hydrochemical depth profiles of the soil moisture in the unsaturated zone were presented and discussed at the final Research Co-ordination Meeting held in Vienna from 18 to 21 October 1999. A total of 44 sites were involved in the project on which detailed information on physiography, lithology, rainfall, unsaturated moisture content and a variety of chemical and isotopic determinants is now available. This publication contains 11 individual reports presented by CRP participants at the Meeting. Each of the reports have been indexed separately

  4. Modularity of Pressing Tools for Screw Press Producing Solid Biofuels

    Directory of Open Access Journals (Sweden)

    Miloš Matúš

    2012-01-01

    Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.

  5. Final IAEA research coordination meeting on plasma-interaction induced erosion of fusion reactor materials. October 9-11, 1995, Vienna, Austria. Summary report

    International Nuclear Information System (INIS)

    Langley, R.A.

    1995-12-01

    The proceedings and results of the Final IAEA Research Coordination Meeting on ''Plasma-interaction Induced Erosion of Fusion Reactor Materials'' held on October 9, 10 and 11, 1995 at the IAEA Headquarters in Vienna are briefly described. This report includes a summary of presentations made by the meeting participants, the results of a data survey and needs assessment for the erosion of plasma facing components and in-vessel materials, and recommendations regarding future work. (author). Refs, figs, tabs

  6. Irradiation as a phytosanitary treatment of food and agricultural commodities. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2004-11-01

    presented at the final research coordination meeting, where the work completed during the last 5 years (1998-2002) was analysed

  7. A novel Fe–Cr–Nb matrix composite containing the TiB{sub 2} neutron absorber synthesized by mechanical alloying and final hot isostatic pressing (HIP) in the Ti-tubing

    Energy Technology Data Exchange (ETDEWEB)

    Litwa, Przemysław [Department of Advanced Materials and Technologies, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland); Perkowski, Krzysztof [Department of Nanotechnology, Institute of Ceramics and Building Materials, Postępu 9, 02-676 Warsaw (Poland); Zasada, Dariusz [Department of Advanced Materials and Technologies, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland); Kobus, Izabela; Konopka, Gustaw [Department of Nanotechnology, Institute of Ceramics and Building Materials, Postępu 9, 02-676 Warsaw (Poland); Czujko, Tomasz [Department of Advanced Materials and Technologies, Military University of Technology, Kaliskiego 2, 00-908 Warsaw (Poland); Varin, Robert A., E-mail: robert.varin@uwaterloo.ca [Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Ave., Waterloo, ON N2L 3G1 (Canada)

    2016-07-25

    The Fe–Cr–Ti-Nb elemental powders were mechanically alloyed/ball milled with TiB{sub 2} and a small quantity of Y{sub 2}O{sub 3} ceramic to synthesize a novel Fe-based alloy-ceramic powder composite that could be processed by hot isostatic pressing (HIP) for a perceived potential application as a neutron absorber in nuclear reactors. After ball milling for the 30–80 h duration relatively uniform powders with micrometric sizes were produced. With increasing milling time a fraction of TiB{sub 2} particles became covered with the much softer Fe-based alloy which resulted in the formation of a characteristic “core-mantel” structure. For the final HIP-ing process the mechanically alloyed powders were initially uniaxially pressed into rod-shaped compacts and then cold isostatically pressed (CIP-ed). Subsequently, the rod-shaped compacts were placed in the Ti-tubing and subjected to hot isostatic pressing (HIP) at 1150 °C/200 MPa pressure. The HIP-ing process resulted in the formation of the near-Ti and intermediate diffusional layers in the microstructure of HIP-ed samples which formed in accord with the Fe-Ti binary phase diagram. Those layers contain the phases such as α-Ti (HCP), the FeTi intermetallic and their hypo-eutectoid mixtures. In addition, needle-like particles were formed in both layers in accord with the Ti-B binary phase diagram. Nanohardness testing, using a Berkovich type diamond tip, shows that the nanohardness in the intermediate layer areas, corresponding to the composition of the hypo-eutectoid mixture of Ti-FeTi, equals 980.0 (±27.1) HV and correspondingly 1176.9 (±47.6) HV for the FeTi phase. The nanohardness in the sample's center in the areas with the fine mixture of Fe-based alloy and small TiB{sub 2} particles equals 1048.3 (±201.8) HV. The average microhardness of samples HIP-ed from powders milled for 30 and 80 h is 588 HV and 733 HV, respectively. - Highlights: • A Fe–Cr–Nb-based composite with TiB{sub 2} neutron

  8. Improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Summary report on the third and final research co-ordination meeting

    International Nuclear Information System (INIS)

    Pashchenko, A.B.

    1996-09-01

    The present report contains the Summary of the Third and Final IAEA Research Co-ordination Meeting (RCM) on ''Improvement of Measurements, Theoretical Computations and Evaluations of Neutron Induced Helium Production Cross Sections'' which was hosted by the Tohoku University and held in Sendai, Japan, from 25 to 29 September 1995. This RCM was organized by the IAEA Nuclear Data Section (NDS), with the co-operation and assistance of local organizers from Tohoku University. Summarized are the proceedings and results of the meeting. The List of Participants and meeting Agenda are included. (author)

  9. Hot-pressed geopolymer

    DEFF Research Database (Denmark)

    Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.

    2017-01-01

    This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...

  10. Impact of long term pesticide usage on soil properties using radiotracer techniques. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2001-11-01

    An important activity of the United Nations Food and Agriculture Organization (FAO) is to assist Member States to ensure that, as far as possible, pesticides are used effectively and safely. To this end, FAO has published Guidelines for the Registration and Control of Pesticides, which forms the basis of most national pesticide registration schemes. Among the recommendations is that data should be provided to show that a candidate pesticide has no unacceptable effects on non-target organisms. Soil micro-flora and fauna, because of their central role in maintaining soil fertility, are highly ranked in this context. Concern has been expressed that the data normally presented may not be adequate to predict the effects on soil micro-organisms of repeated, heavy, multiple applications of pesticides that are common in monocultures of crops, such as cotton, maize and rice. Evaluation of the effects of such pesticide regimes requires studies of a range of soil microbial activities, some of which require the use of 14 C-labelled pesticides. Therefore, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture organised a Co-ordinated Research project to assess whether or not there is a need to extend the data requirements for pesticide registration to cover such extreme agricultural practices. This TECDOC summarises the outcome of this programme and includes papers presented at the final Research Co-ordination meeting held in Hangzhou, China, 24-28 May 1999

  11. Primera Reunion de la Comision Nacional de Analisis y Evaluacion del Sistema Educativo: Informe Final (The First Meeting of the National Committee for Analysis and Evaluation of the Educational System: Final Report).

    Science.gov (United States)

    Ministerio de Cultura y Educacion, Buenos Aires (Argentina). Centro National de Documentacion e Informacion Educativa.

    This document contains the legislation creating the National Committee for Analysis and Evaluation of the Educational System and the final report of that committee's first meeting. The report deals with each level from elementary to higher education. For each level it describes and considers curriculum, school buildings, human resources, current…

  12. Irradiation as a quarantine treatment of arthropod pests. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    at the final FAO/IAEA Research Co-ordination Meeting hosted by the College of Tropical Agriculture and Human Resources, University of Hawaii at Manoa, and Department of Agriculture, State of Hawaii, held in Honolulu, Hawaii, from 3 to 7 November 1997 Refs, figs, tabs

  13. Irradiation as a quarantine treatment of arthropod pests. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1999-05-01

    at the final FAO/IAEA Research Co-ordination Meeting hosted by the College of Tropical Agriculture and Human Resources, University of Hawaii at Manoa, and Department of Agriculture, State of Hawaii, held in Honolulu, Hawaii, from 3 to 7 November 1997

  14. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2011-01-01

    Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media

  15. Two layer powder pressing

    International Nuclear Information System (INIS)

    Schreiner, H.

    1979-01-01

    First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future

  16. Fall meeting 2004: information conference on engines. Final and interim reports of the research centres; Herbsttagung 2004: Informationstagung Motoren. Abschluss- und Zwischenberichte der Forschungsstellen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Proceedings (volume R526, 2004) of the Information Conference on Engines which has been held on the 23rd September 2004 in Pforzheim/Germany, contains ten final and interim reports. The subjects of the contributions presented were as follow: particulate filter with NOx storage coating; cause study on damage-relevant knocking combustion; spray wall interaction; binaural transfer path analysis synthesis; acoustical optimized sealing-systems on engine acoustics; working process caused gas exchange noise; knowledge based diesel engine optimization; frontal press fit assemblies; case hardening and autofrettage; oil condition sensor (orig.)

  17. Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2012-01-01

    Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

  18. Researching on YH100 Numerical Control Servo Press Hydraulic Control System and Control Algorithm

    Directory of Open Access Journals (Sweden)

    Kai LI

    2014-09-01

    Full Text Available In order to study the numerical control (NC servo press hydraulic control system and its control algorithm. The numerical control servo press performance and control principle of hydraulic control system are analyzed. According to the flow equation of the hydraulic control valve, hydraulic cylinder flow continuity equation and the force balance equation of the hydraulic cylinder with load press, the mathematical model of hydraulic control system is established. And the servo press hydraulic system transfer function is deduced. Introducing the suitable immune particle swarm control algorithm for servo press hydraulic system, and the control system block diagram is established. Immune algorithm is used to optimize new control parameters of the system and adopt the new optimization results to optimize the system simulation. The simulation result shows that the hydraulic system’s transition time controlled by the immune particle swarm algorithm is shorter than traditional ones, and the control performance is obviously improved. Finally it can be concluded that immune particle swarm PID control have these characteristics such as quickness, stability and accuracy. Applying this principle into application, the obtained YH100 numerical control servo press hydraulic control system meets the requirement.

  19. Modern trends in ion source development for low-energy accelerators. Final report of a consultants' meeting

    International Nuclear Information System (INIS)

    1998-01-01

    The IAEA consultative meeting was held to review the status of ion source development for accelerators having output energies less than 100 MeV (low-energy accelerators). Terms of reference for the meeting were to review the status of ion source development for several different types of low-energy accelerators (Van de Graaff, cyclotron, sealed-tube neutron generator, ion implanter, etc.) and to highlight any recent advances in this field. Individual abstracts were prepared for 5 papers presented at this meeting

  20. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    Science.gov (United States)

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  1. ALUMINUM BOX BUNDLING PRESS

    Directory of Open Access Journals (Sweden)

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  2. DSS / Press Room

    Science.gov (United States)

    Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

  3. OAS :: Press Releases

    Science.gov (United States)

    subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

  4. bbPress complete

    CERN Document Server

    Wynne, Rhys

    2013-01-01

    A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.

  5. Induced mutations in connection with biotechnology for crop improvement in Latin America. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    This publication results from the second Co-ordinated Research Project (CRP) on Plant Breeding and Genetics organized on a regional basis in Latin America. The present CRP and the previous one were initiated and implemented in response to the pressing need to enhance the productivity of economic plants, viz. food crops, fruits and ornamentals. Improvement of crop production has become the highest priority in most countries of Latin America, as in other regions. Breeding superior varieties is often the only feasible solution where inputs are limited; well adapted varieties are required to meet specific agro-environmental conditions. Such varieties provide yield stability on an economically required level. The most important and common factors limiting crop production are abiotic, e.g. cold, salinity, soil aluminium toxicity and drought; as well as biotic, e.g. diseases and pests. Modern biotechnology and induced mutations offer new means and significant potential to breed desired varieties in a relatively short time. Additionally, both approaches facilitate the breeding of some vegetatively propagated crops which until now were improved mainly through selection of rare spontaneous mutants in natural or cultivated populations. Using some of these techniques it recently became possible to produce, in some crops, true-to-type mutated lines or clones within a few months. Biotechnology can also facilitate selection, description and molecular characterization of promising mutants. Currently used DNA markers, such as restriction fragment length polymorphism (RFLP), random amplified polymorphic DNA (RAPD) as well as other polymerase chain reaction (PCR)-based techniques, were included in this CRP to benefit the important crops of this region. Also included in this CRP were doubled haploids (DH), which are obtained from anther or microspore cultures and are very suitable biotechnology methods. In connection with radiation-induced mutations, they can speed up conventional

  6. Induced mutations in connection with biotechnology for crop improvement in Latin America. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-05-01

    This publication results from the second Co-ordinated Research Project (CRP) on Plant Breeding and Genetics organized on a regional basis in Latin America. The present CRP and the previous one were initiated and implemented in response to the pressing need to enhance the productivity of economic plants, viz. food crops, fruits and ornamentals. Improvement of crop production has become the highest priority in most countries of Latin America, as in other regions. Breeding superior varieties is often the only feasible solution where inputs are limited; well adapted varieties are required to meet specific agro-environmental conditions. Such varieties provide yield stability on an economically required level. The most important and common factors limiting crop production are abiotic, e.g. cold, salinity, soil aluminium toxicity and drought; as well as biotic, e.g. diseases and pests. Modern biotechnology and induced mutations offer new means and significant potential to breed desired varieties in a relatively short time. Additionally, both approaches facilitate the breeding of some vegetatively propagated crops which until now were improved mainly through selection of rare spontaneous mutants in natural or cultivated populations. Using some of these techniques it recently became possible to produce, in some crops, true-to-type mutated lines or clones within a few months. Biotechnology can also facilitate selection, description and molecular characterization of promising mutants. Currently used DNA markers, such as restriction fragment length polymorphism (RFLP), random amplified polymorphic DNA (RAPD) as well as other polymerase chain reaction (PCR)-based techniques, were included in this CRP to benefit the important crops of this region. Also included in this CRP were doubled haploids (DH), which are obtained from anther or microspore cultures and are very suitable biotechnology methods. In connection with radiation-induced mutations, they can speed up conventional

  7. Myths About Press Freedom

    Directory of Open Access Journals (Sweden)

    Kaarle Nordenstreng

    2007-06-01

    Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.

  8. Idealized Compression Ratio for a Screw Briquetting Press

    Directory of Open Access Journals (Sweden)

    Peter Biath

    2012-01-01

    Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.

  9. Detection of explosives (in particular landmines) by low-cost methods. Final report of an advisory group meeting

    International Nuclear Information System (INIS)

    1998-01-01

    The purpose of this Advisory Group Meeting was to put together experts from several areas of explosives (landmines) detection, both nuclear and non-nuclear, to generate ideas which might lead to development of a low-cost method for detection of explosives (in particular landmines), or to a modification of existing methods. The discussions included nuclear, acoustic, radar, infrared, x-ray, and nuclear quadrupole resonance methods for localizing and characterizing landmines. Many technologies are still under laboratory development. This document includes 8 contributed papers, each of them was indexed and abstracted

  10. Physics and dynamics coupling across scales in the next generation CESM: Meeting the challenge of high resolution. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Larson, Vincent E.

    2015-02-21

    This is a final report for a SciDAC grant supported by BER. The project implemented a novel technique for coupling small-scale dynamics and microphysics into a community climate model. The technique uses subcolumns that are sampled in Monte Carlo fashion from a distribution of subgrid variability. The resulting global simulations show several improvements over the status quo.

  11. ISS Expedition 08 Press Kit

    Data.gov (United States)

    National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

  12. WordPress multisite administration

    CERN Document Server

    Longren, Tyler

    2013-01-01

    This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.

  13. Four Theories of the Press.

    Science.gov (United States)

    Siebert, Fred S.; And Others

    A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

  14. Which Freedom of the Press?

    DEFF Research Database (Denmark)

    Rytter, Jens Elo

    2010-01-01

    The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...

  15. WordPress for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2014-01-01

    The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll

  16. Advisory group meeting on safeguards related to final disposal of nuclear material in waste and spent fuel

    International Nuclear Information System (INIS)

    1988-07-01

    This paper is primarily concerned with Section 11 of INFCIRC/153 which provides for the possible termination of safeguards based on a determination that the nuclear material in question has been consumed, has been diluted, or has become practicably irrecoverable. Two distinctly different categories of nuclear material have been suggested for possible termination of safeguards based on a determination that the nuclear material has become practicably irrecoverable: One relates to a variety of low concentration waste materials, meaning thereby materials which the State or plant operator considers to be of questionable economic recoverability and the other relates to the spent fuel placed in facilities described as ''permanent repositories'' which are at least claimed to represent ''final disposal'' facilities and are candidates for a possible determination of practicably irrecoverable. 26 refs, tabs

  17. Speciation analysis of arsenic, chromium and selenium in aquatic media. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2007-03-01

    The initiation of the Coordinated Research Project (CRP) on Development and Validation of Speciation Analysis using Nuclear Techniques resulted from the recognition that knowledge of total element concentration does not provide adequate information to understand the effects of trace and heavy metals observed in the environment and in living systems. Their toxicity, bioavailability, physiological and metabolic processes, mobility and distribution are greatly dependent on the specific chemical form of the element. Speciation analysis has yet to be developed to its full potential for biochemical, clinical and environmental investigations and still more work is needed in the near future. Seven participants from seven countries participated in this CRP covering a range of analytical techniques including GC, HPLC, AAS, and ICP-MS. The first Research Coordination Meeting (RCM) of the Coordinated Research Project on the Development and Validation of Speciation Analysis using Nuclear Techniques was held at the Reactor Centre of the Jozef Stefan Institute, Podgorica (near Ljubljana), Slovenia, 20-23 June 2001. The second RCM was held at the Technical University of Vienna, 18-22 November 2002, where, in addition to the participants, two external researchers could present their views and experience in the field. The last RCM was held in Vienna, 26-29 April 2004, and this publication is a summary of the results achieved and presented at this last RCM. The participants have developed several new procedures for the reliable analysis of As, Cr, and Se species, mainly in aquatic media. A new instrument was designed and several recommendations for speciation analysis were issued. It is hoped that this publication will make a contribution to enhancing the awareness of the importance of speciation analysis and add to the reliability of speciation results in Member State laboratories

  18. Reducing VOC Press Emission from OSB Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  19. WordPress For Dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2011-01-01

    The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b

  20. Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ``Genetic Engineering Technology for the Improvement of the Sterile Insect Technique`` highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits. Refs, figs, tabs.

  1. Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-01-01

    Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ''Genetic Engineering Technology for the Improvement of the Sterile Insect Technique'' highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits

  2. TWRS Final Safety Analysis Report (FSAR) integrated control decision team (ICDT) meetings January 22 - 31,1997

    International Nuclear Information System (INIS)

    Saladin, V.L.

    1997-01-01

    U.S. Department of Energy (DOE), Richland Operations Office (RL) letter 97-MSD-163 dated January 15, 1997, directed the Project Hanford Management Contractor (Contractor), Fluor Daniel Hanford, inc., to form a joint RL-Contractor Integrated Control Decision Team (ICDT) to evaluate the Tank Waste Remediation System (TWRS) Final Safety Analysis Report (FSAR) accident scenarios that were identified to be above the risk evaluation guidelines (radiological and/or toxicological) defined by the April 8, 1996, letter from J. Kinzer, RL-TWRS (96-MSO-069) to Dr. A. L. Trego, Westinghouse Hanford Company. The ICDT evaluated six postulated accidents from the draft FSAR which had analyzed consequences above the DOE directed risk evaluation guidelines after controls were applied. The accidents were: (1) Organic Solvent Fires; (2) Organic Salt-Nitrate Fire; (3) Spray Leak; (4) Flammable Gas; (5) Steam Intrusion; and (6) Seismic Event. Five of the postulated accidents exceed radiological risk guidelines. Although the postulated steam intrusion accident does not exceed the radiological risk guidelines, it was considered in the ICDT evaluation because its calculated consequences exceed toxicological risk evaluation guidelines. Figure 1 delineates the mitigated and unmitigated risk evaluations performed for the FSAR

  3. WordPress Top Plugins

    CERN Document Server

    Corbin, Brandon

    2010-01-01

    Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

  4. Improvement of basic food crops in Africa through plant breeding, including the use of induced mutations. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The Co-ordinated Research Programme (CRP) on Improvement of Basic Food Crops in Africa Through Plant Breeding, Including the Use of Induced Mutations, funded by the Italian Government, was initiated in 1989 in the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture. The primary objective of this CRP was to breed improved varieties of stable food crops of Africa with the main emphasis on the indigenous species and their local cultivars. The fourth and final Research Co-ordination meeting under the CRP was held in Naples, Italy from 30 October - 3 November 1995. This publication includes the reports, conclusions and recommendations made by the participants. We hope that it will be of value to researchers, students and policy makers alike in their endeavour to promote plant breeding and increase food productions in Africa. Refs, figs, tabs.

  5. Improvement of basic food crops in Africa through plant breeding, including the use of induced mutations. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1997-07-01

    The Co-ordinated Research Programme (CRP) on Improvement of Basic Food Crops in Africa Through Plant Breeding, Including the Use of Induced Mutations, funded by the Italian Government, was initiated in 1989 in the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture. The primary objective of this CRP was to breed improved varieties of stable food crops of Africa with the main emphasis on the indigenous species and their local cultivars. The fourth and final Research Co-ordination meeting under the CRP was held in Naples, Italy from 30 October - 3 November 1995. This publication includes the reports, conclusions and recommendations made by the participants. We hope that it will be of value to researchers, students and policy makers alike in their endeavour to promote plant breeding and increase food productions in Africa. Refs, figs, tabs

  6. Optimizing the CSP Tower Air Brayton Cycle System to Meet the SunShot Objectives - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Bryner, Elliott [Soutwest Research Inst., San Antonio, TX (United States); Brun, Klaus [Soutwest Research Inst., San Antonio, TX (United States); Coogan, Shane [Soutwest Research Inst., San Antonio, TX (United States); Cunningham, C. Seth [Soutwest Research Inst., San Antonio, TX (United States); Poerner, Nathan [Soutwest Research Inst., San Antonio, TX (United States)

    2016-02-26

    The objective of this project is to increase Concentrated Solar Power (CSP) tower air receiver and gas turbine temperature capabilities to 1,000ºC by the development of a novel gas turbine combustor, which can be integrated on a megawatt-scale gas turbine, such as the Solar Turbines Mercury 50™. No combustor technology currently available is compatible with the CSP application target inlet air temperature of 1,000°C. Autoignition and flashback at this temperature prevent the use of conventional lean pre-mix injectors that are currently employed to manage NOx emissions. Additional challenges are introduced by the variability of the high-temperature heat source provided by the field of solar collectors, the heliostat in CSP plants. For optimum energy generation from the power turbine, the turbine rotor inlet temperature (TRIT) should remain constant. As a result of changing heat load provided to the solar collector from the heliostat, the amount of energy input required from the combustion system must be adjusted to compensate. A novel multi-bank lean micro-mix injector has been designed and built to address the challenges of high-temperature combustion found in CSP applications. The multi-bank arrangement of the micro-mix injector selectively injects fuel to meet the heat addition requirements to maintain constant TRIT with changing solar load. To validate the design, operation, and performance of the multi-bank lean micro-mix injector, a novel combustion test facility has been designed and built at Southwest Research Institute® (SwRI®) in San Antonio, TX. This facility, located in the Turbomachinery Research Facility, provides in excess of two kilograms per second of compressed air at nearly eight bar pressure. A two-megawatt electric heater raises the inlet temperature to 800°C while a secondary gas-fired heater extends the operational temperature range of the facility to 1,000°C. A combustor test rig connected to the heater has been designed and built to

  7. Predictor of regulation of uranium dioxide powder pressing process

    International Nuclear Information System (INIS)

    Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique

    2007-01-01

    One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)

  8. Consumer acceptance and market development of irradiated food in Asia and the Pacific. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    This publication covers the activities and accomplishments of eight countries that participated in a Co-ordinated Research Project (CRP) on Public Acceptance and Market Development of Irradiated Food in Asia and the Pacific, as presented at a final Research Coordination Meeting held in Bangkok, 20-25 September 1998. The CRP was implemented through research agreements with Bangladesh, China (one each for Shanghai and Beijing), the Republic of Korea, Malaysia, Pakistan, the Philippines, Sri Lanka, Thailand and Viet Nam, from 1994 to 1998. The technical work undertaken to bring food irradiation technology to the marketplace to address food security, public health and trade needs, is described. This covered the establishment of quality assurance procedures, the determination of irradiation doses for nontraditional as well as traditional foods, the conduct of techno-economic feasibility, and the identification of industry and consumer needs. In the majority of cases, R and D activities were undertaken in partnership with industry. Developments in the establishment and harmonization of regulations on food irradiation were also monitored. The participants made commendable progress in the marketing of irradiated food and in the understanding and promotion of consumer acceptance of the technology. This was demonstrated in the marketing of close to 179,000 tons of different food and related products through normal trading channels. While the volume of food irradiated varied with the capacity of irradiation plants in participating countries, the work showed that consumers would accept irradiated foods and that trade benefits would ensue from the application of the technology. Information dissemination was found to be a critical factor in public acceptance. The discussions at the final Research Co-ordination Meeting, which are also summarized in this publication, focused on key issues and recommendations to bring about the wider commercialization of food irradiation for the

  9. Consumer acceptance and market development of irradiated food in Asia and the Pacific. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-05-01

    This publication covers the activities and accomplishments of eight countries that participated in a Co-ordinated Research Project (CRP) on Public Acceptance and Market Development of Irradiated Food in Asia and the Pacific, as presented at a final Research Coordination Meeting held in Bangkok, 20-25 September 1998. The CRP was implemented through research agreements with Bangladesh, China (one each for Shanghai and Beijing), the Republic of Korea, Malaysia, Pakistan, the Philippines, Sri Lanka, Thailand and Viet Nam, from 1994 to 1998. The technical work undertaken to bring food irradiation technology to the marketplace to address food security, public health and trade needs, is described. This covered the establishment of quality assurance procedures, the determination of irradiation doses for nontraditional as well as traditional foods, the conduct of techno-economic feasibility, and the identification of industry and consumer needs. In the majority of cases, R and D activities were undertaken in partnership with industry. Developments in the establishment and harmonization of regulations on food irradiation were also monitored. The participants made commendable progress in the marketing of irradiated food and in the understanding and promotion of consumer acceptance of the technology. This was demonstrated in the marketing of close to 179,000 tons of different food and related products through normal trading channels. While the volume of food irradiated varied with the capacity of irradiation plants in participating countries, the work showed that consumers would accept irradiated foods and that trade benefits would ensue from the application of the technology. Information dissemination was found to be a critical factor in public acceptance. The discussions at the final Research Co-ordination Meeting, which are also summarized in this publication, focused on key issues and recommendations to bring about the wider commercialization of food irradiation for the

  10. Influência de diferentes ângulos articulares obtidos na posição inicial do exercício pressão de pernas e final do exercício puxada frontal sobre os valores de 1RM Influencia en los diferentes ángulos articulares obtenidos en la posición inicial del ejercicio de presión de piernas y al final del ejercicio de puje frontal sobre los valores de 1RM The influence of different joint angles obtained in the starting position of leg press exercise and at the end of the frontal pull exercise on the values of 1RM

    Directory of Open Access Journals (Sweden)

    João Augusto Reis de Moura

    2004-08-01

    Full Text Available O teste de uma repetição máxima (1RM tem sido aplicado sobre várias circunstâncias e em diversos objetivos, sendo que variáveis potencialmente influenciadoras deste teste têm sido constantemente estudadas. Este estudo buscou avaliar a influência de diferentes ângulos na posição inicial de execução dos exercícios pressão de pernas e posição final do exercício puxada frontal sobre os resultados de 1RM. Para tal foram mensurados no teste de 1RM dos exercícios pressão de pernas e puxada frontal 20 sujeitos voluntários do sexo masculino (médias de idade 24,5 anos, estatura 1,75 metros e massa corporal de 72,0kg. Após consentimento de participação e a adaptação ao treinamento resistido com pesos, foi aplicado o teste de 1RM no exercício pressão de pernas em três diferentes ângulos de testagem na posição inicial (80º, 90º e 100º de flexão do joelho e também no exercício puxada frontal posição final (60º, 70º e 80º de flexão do cotovelo, sendo que cada ângulo foi testado em dias diferentes, porém com os dois exercícios. Os resultados indicam que as médias de 1RM para o exercício pressão de pernas são estatisticamente diferentes (F = 30,199; p = 0,000 entre si (post hoc de Tukey. Já para o exercício puxada frontal, embora existam diferenças, estas não foram estatisticamente significativas (F = 1,330; p = 0,281. Conclui-se que diferentes técnicas de execução dos exercícios que envolvam angulações diversas, principalmente nas posições iniciais destes, devem ser rigorosamente controladas, pois podem afetar a quilagem levantada.El test de Repetición Máxima (1RM ha sido aplicado en varias circunstancias y en diversos objetivos siendo que variable potencialmente influyentes en este test vienen siendo constantemente estudiadas. Este estudio buscó evaluar la influencia de diferentes ángulos en la posición final del ejercicio de presión de piernas y de puje frontal sobre los resultados de 1RM

  11. Indre spenninger og ytre press

    DEFF Research Database (Denmark)

    Ibsen, Bjarne

    2011-01-01

    Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....

  12. BuddyPress theme development

    CERN Document Server

    Lister, Tammie

    2013-01-01

    This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.

  13. Consultancy Meeting on Preparation of the Final Technical Document of the IAEA CRP on Analytical and Experimental Benchmark Analysis of Accelerator Driven Systems

    International Nuclear Information System (INIS)

    2014-01-01

    With the objective to study the major physics phenomena of the spallation source and its coupling to a subcritical system, between 2005 and 2010 the IAEA carried out a Coordinated Research Project (CRP) called “Analytical and Experimental Benchmark Analyses of Accelerator Driven Systems (ADS)”. The CRP was contributed by 27 institutions from 18 Member States (Argentina, Belarus, Belgium, Brazil, China, France, Germany, Greece, Hungary, Italy, Japan, Netherlands, Poland, Russian Federation, Spain, Sweden, Ukraine and the USA), which performed a number of analytical and experimental benchmark activities. The main objective of the CRP was to develop, verify and validate calculation tools able to perform detailed ADS calculations, from the high energy proton beam to thermal neutron energies. The purpose of this meeting was to: - Collect and review all the available contributions produced by the CRP participants; - Define structure and content of the final TECDOC; - Assemble the first draft of the TECDOC; - Identify important missing parts; - Distribute tasks and responsibilities for drafting and editing the different sections and sub-sections of the TECDOC; - Agree on the time schedule for the TECDOC finalization, review and publication. The participants were requested to contribute to all the foreseen tasks

  14. Head First WordPress

    CERN Document Server

    Siarto, Jeff

    2010-01-01

    Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al

  15. Smashing WordPress Themes Making WordPress Beautiful

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs

  16. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000

  17. Radiation processing for safe, shelf-stable and ready-to-eat food. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-01-01

    The increasingly busy lifestyles of populations in many countries have driven the demand for safe, convenient and ready-to-eat food. Traditional food processes such as drying, canning or refrigeration offer a partial solution to this demand as the sensory quality of such food may be significantly affected or the products may be contaminated by pathogenic bacteria during preparation. For developing countries, safe shelf-stable food without the need for refrigeration would offer advantages. In addition, the increasing number of immuno-compromised populations in many countries requires a new approach to food safety to meet their needs. Irradiation offers a potential to enhance microbiological safety and quality of food through shelf-life extension. The benefits of irradiation as a sanitary treatment of many types of food are well known, some of which are applied commercially in several countries. Little data were available, however, on the effect of irradiation on minimally processed food and composite food including prepared meals. A Co-ordinated Research Project (CRP) on the Development of Safe, Shelf-Stable and Ready-to-Eat Food through Radiation Processing therefore was implemented by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in 1996 to evaluate the role of irradiation for such food. The results were encouraging as irradiation offers promise as a sanitary treatment to ensure microbiological safety and shelf-life extension of several types of food products including pre-cut vegetables and some sous-vide meals, chilled ready-prepared meals, chilled ready-to-eat meat products, food for immuno-compromised patients/populations, sterile meals, ready-to-eat-food of intermediate moisture content. This publication presents the research results reported at the final Research Co-ordination meeting on this CRP held in Saint Hyacinthe, Quebec, Canada, 10-14 July 2000.

  18. Application of DNA based marker mutations for improvement of cereals and other sexually reproduced crop plants. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The Co-ordinated Research Programme (CRP) on the Application of DNA Based Marker Mutations for Improvement of Cereals and Other Sexually Reproduced Crop Plants represents the first of three CRPs dealing with the application of molecular markers to mutations and plant breeding and was implemented between 1992 and 1996. A second companion CRP entitled Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops devoted to the application of molecular markers in vegetatively propagated crops species was implemented between 1993 and 1997. One positive consequence of these two CRPs has been the implementation of a third CRP entitled Radioactively Labeled DNA Probes for Crop Improvement, which began in 1995 and aims to provide enabling technologies, in the form of probes and primers, to laboratories in developing countries. The rapid development of molecular marker technologies has also resulted in a dramatic increase in request from developing Member States for technical co-operation projects utilizing molecular markers to improve local varieties for biotic and abiotic stresses and other traits of relevance. With the intensified use of induced mutations in genetic studies, it will be important to continue the important work of understanding induced mutations at the molecular level. Evidence of the progress made in implementing molecular marker technologies in laboratories around the world is presented in this publication, which contains the results presented by the participants at the fourth and final Research Co-ordination Meeting of the CRP held in Vienna, 4-8 November 1996. The FAO and IAEA wish to express their sincere appreciation to the participants of the meeting for their work during the project period resulting in the summary and scientific reports presented in this publication. Refs, figs, tabs.

  19. Application of DNA based marker mutations for improvement of cereals and other sexually reproduced crop plants. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-03-01

    The Co-ordinated Research Programme (CRP) on the Application of DNA Based Marker Mutations for Improvement of Cereals and Other Sexually Reproduced Crop Plants represents the first of three CRPs dealing with the application of molecular markers to mutations and plant breeding and was implemented between 1992 and 1996. A second companion CRP entitled Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops devoted to the application of molecular markers in vegetatively propagated crops species was implemented between 1993 and 1997. One positive consequence of these two CRPs has been the implementation of a third CRP entitled Radioactively Labeled DNA Probes for Crop Improvement, which began in 1995 and aims to provide enabling technologies, in the form of probes and primers, to laboratories in developing countries. The rapid development of molecular marker technologies has also resulted in a dramatic increase in request from developing Member States for technical co-operation projects utilizing molecular markers to improve local varieties for biotic and abiotic stresses and other traits of relevance. With the intensified use of induced mutations in genetic studies, it will be important to continue the important work of understanding induced mutations at the molecular level. Evidence of the progress made in implementing molecular marker technologies in laboratories around the world is presented in this publication, which contains the results presented by the participants at the fourth and final Research Co-ordination Meeting of the CRP held in Vienna, 4-8 November 1996. The FAO and IAEA wish to express their sincere appreciation to the participants of the meeting for their work during the project period resulting in the summary and scientific reports presented in this publication

  20. Standardized methods to verify absorbed dose in irradiated food for insect control. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-03-01

    of this CRP at the final Research Co-ordination Meeting held in Cascais, Portugal, 30 March - 3 April 1998. (author)

  1. 77 FR 50102 - Sunshine Act Meeting Notice

    Science.gov (United States)

    2012-08-20

    ..., Inc. Draft Advisory Opinion 2012-30: Revolution Messaging, LLC. Audit Division Recommendation... the meeting date. PERSON TO CONTACT FOR INFORMATION: Judith Ingram, Press Officer, Telephone: (202...

  2. Science coverage and the press

    International Nuclear Information System (INIS)

    Hawkes, N.

    1992-01-01

    The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)

  3. Hot-pressing steatite bodies

    International Nuclear Information System (INIS)

    Aparicio Arroyo, E.

    1967-01-01

    Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs

  4. Application of personal computers to enhance operation and management of research reactors. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-02-01

    The on-line of personal computers (PCs) can be valuable to guide the research reactor operator in analysing both normal and abnormal situations. PCs can effectively be used for data acquisition and data processing, and providing information to the operator. Typical areas of on-line applications of PCs in nuclear research reactors include: Acquisition and display of data on process parameters; performance evaluation of major equipment and safety related components; fuel management; computation of reactor physics parameters; failed fuel detection and location; inventory of system fluids; training using computer aided simulation; operator advice. All these applications require the development of computer programmes and interface hardware. In recognizing this need, the IAEA initiated in 1990 a Co-ordinated Research Programme (CRP) on ''Application of Personal Computers to Enhance Operation and Management of Research Reactors''. The final meeting of the CRP was held from 30 October to 3 November 1995 in Dalata Viet Nam. This report was written by contributors from Bangladesh, Germany, India, the Republic of Korea, Pakistan, Philippines, Thailand and Viet Nam. The IAEA staff members responsible for the publication were K. Akhtar and V. Dimic of the Physics Section, Division of Physical and Chemical Sciences

  5. Isotope and geochemical techniques applied to geothermal investigations. Proceedings of the final research co-ordination meeting held in Dumaguete City, Philippines, 12-15 October 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    In the last ten years, geothermal energy has emerged as an alternative source of energy for electrical and non-electrical uses. In some of these countries geothermal energy contributed up to 40% of the national power requirement. In others, it is being widely used in agriculture, aquaculture, air conditioning, kiln and fruit drying, pulp and paper industry, greenhouses and food processing. The Co-ordinated Research Programme (CRP) on the Application of Isotope and Geochemical Techniques to Geothermal Exploration in the Middle East, Asia, the Pacific and Africa aimed at integrating isotope techniques with traditional geochemical and hydrological methods in understanding the characteristics of geothermal systems. It involved isotopic and chemical surveys of hot to cold springs, wells and rivers in exploration areas as well as in exploited reservoirs where problems such as return of injected wastewaters are experienced. This publication is a compilation of the scientific papers presented at the final Research Co-ordination Meeting, held in Dumaguete City, Philippines, from 12 to 15 October 1993. Refs, figs and tabs.

  6. Speech freedom and press freedom in human security in Rwanda

    OpenAIRE

    Niyonzima, Oswald

    2014-01-01

    Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...

  7. Mathematical modelling of wet paper pressing

    NARCIS (Netherlands)

    Bežanovic, D.

    2005-01-01

    The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

  8. Mutation breeding of oil seed crops. Proceedings of a final research co-ordination meeting of an FAO/IAEA co-ordinated research programme held in Vienna, 11-15 January 1993

    International Nuclear Information System (INIS)

    1994-12-01

    The document contains 19 papers presented at the final Research Co-ordination Meeting on 'Mutation Breeding of Oil Seed Crops' held in Vienna between 11-15 January 1993. A separate abstract was prepared for each paper. Refs, figs and tabs

  9. Innovative small and medium sized reactors: Design features, safety approaches and R and D trends. Final report of a technical meeting

    International Nuclear Information System (INIS)

    2005-05-01

    meeting and presents its final report, which summarizes the major features and identifies the technology and infrastructure development needs common to certain groups of the SMR concepts and designs considered at the meeting

  10. Conférence de presse | Press Conference

    CERN Multimedia

    CERN. Geneva; Bejar Alonso, Isabel

    2018-01-01

    10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.

  11. Investing in a Large Stretch Press

    Science.gov (United States)

    Choate, M.; Nealson, W.; Jay, G.; Buss, W.

    1986-01-01

    Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

  12. WordPress 3 Cookbook

    CERN Document Server

    Shreves, Ric

    2011-01-01

    This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.

  13. Use of novel DNA fingerprinting techniques for the detection and characterization of genetic variation in vegetatively propagated crops. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-10-01

    Vegetative propagated crops, such as banana and platain, sweet potato, yam, sugarcane and cassava, represent important sources of food in the developing countries. Although some of these crops may produce seeds, they must for practical purposes be propagated vegetatively. As normal plant breeding strategies based on genetic hybridization are of limited value or not applicable to such crops, it is necessary to assess the genetic diversity already existing in these crops and to design breeding strategies accordingly. If the existing genetic variation is shown to be too narrow for breeding purposes, one promising possibility for the introduction of genetic variability is the use of mutations induced by radiation or chemical mutagens. This CRP focused on: the detection of genetic diversity induced by mutagenic treatment or in vitro culture; the development of crop-specific markers; and increasing co-operation between molecular biologists in advanced laboratories and plant breeders and molecular biologists in the developing countries. The success of this CRP is evidenced by the introduction and application of new molecular methods by laboratories in developing countries, specially for the analysis of local crop genetic diversity. These exciting preliminary results show the potential for applications in crop improvement but much work remains to be done. Many of the vegetatively propagated species are ''orphan crops'', under-investigated on the international level. The development of new uses of transgenesis for the development of edible vaccines should not be overlooked. The challenge that remains is in the application of these new tools for practical end-user oriented improvements in vegetatively propagated crops. The present publication summarizes the third and final Research Co-ordination Meeting on the Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops

  14. Use of novel DNA fingerprinting techniques for the detection and characterization of genetic variation in vegetatively propagated crops. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    Vegetative propagated crops, such as banana and platain, sweet potato, yam, sugarcane and cassava, represent important sources of food in the developing countries. Although some of these crops may produce seeds, they must for practical purposes be propagated vegetatively. As normal plant breeding strategies based on genetic hybridization are of limited value or not applicable to such crops, it is necessary to assess the genetic diversity already existing in these crops and to design breeding strategies accordingly. If the existing genetic variation is shown to be too narrow for breeding purposes, one promising possibility for the introduction of genetic variability is the use of mutations induced by radiation or chemical mutagens. This CRP focused on: the detection of genetic diversity induced by mutagenic treatment or in vitro culture; the development of crop-specific markers; and increasing co-operation between molecular biologists in advanced laboratories and plant breeders and molecular biologists in the developing countries. The success of this CRP is evidenced by the introduction and application of new molecular methods by laboratories in developing countries, specially for the analysis of local crop genetic diversity. These exciting preliminary results show the potential for applications in crop improvement but much work remains to be done. Many of the vegetatively propagated species are ``orphan crops``, under-investigated on the international level. The development of new uses of transgenesis for the development of edible vaccines should not be overlooked. The challenge that remains is in the application of these new tools for practical end-user oriented improvements in vegetatively propagated crops. The present publication summarizes the third and final Research Co-ordination Meeting on the Use of Novel DNA Fingerprinting Techniques for the Detection and Characterization of Genetic Variation in Vegetatively Propagated Crops Refs, figs, tabs

  15. The press media and the risk perception

    International Nuclear Information System (INIS)

    Manetti, Cristiane Teixeira

    2009-01-01

    In this study it was identified the frequency of negative and positive news on the nuclear question in the press media. Due to the complexity of the matter, we opt to perform a study case that could illustrate the theoretical discussion presented in this research. Thus, due to the constant presence of news related to IPCC meeting, in the national and foreign press, we opt to focus our study on one year period just after the release of the 4th IPCC Report, in February of 2007. The research was centered only in the printed matters, since there is significant differences between the printed media and others, like TV, radio or web, restricting the use of the same bibliographical reference. In this study it was collected journalistic material involving the nuclear energy and was verified the predominant speech of the vehicles of communication and the sources of information. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in the paper. The negative approach almost always was assumed by the ONGs in general, as expected, due to the its well known position in the treatment of matters related to the nuclear energy. Also it is important to point out that all the tracked vehicles of information mixed positive and negative news articles on the subject; and evidences of hegemonic speech by official sources had been observed. (author)

  16. Cyclic microwave treatment of pressed garments. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Alan E. [PRESSET, Inc. (United States)

    2001-01-31

    In the early 1990's there was a resurgence in what was called "wrinkle free" garments. It had been popular in the 1960's. As cotton products gained a larger share of the fiber market in apparel, "wrinkle free" became a very strong marketing effort. Because we were very knowledgeable in this market we investigated the problem that had plagued it in the 60's, namely product quality. To make "wrinkle free" garments one had to either buy a fabric that was treated with chemicals, called resins, that when "cured" would impart the "wrinkle free" qualities to the garment permanently.

  17. Law and the Student Press.

    Science.gov (United States)

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  18. Local and international press digest

    CERN Multimedia

    2008-01-01

    The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.

  19. A new hot pressing technique

    International Nuclear Information System (INIS)

    Carcey, J.

    1975-01-01

    An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr

  20. Meet the Press: Cultural Criticism for the 1990s.

    Science.gov (United States)

    Torgovnick, Marianna

    1991-01-01

    Notes that issues in academia are inadequately represented in journalism. Urges academics who write about culture to write for the broad audience of the college educated. Maintains that, to do so, cultural critics must use appropriate language and tone and reconsider whether academic journals are really the only outlet for their work. (SR)

  1. Educational Reform and Educational Research: New Challenges in Linking Research, Information and Decision Making. Final Report of the International Meeting (Tokyo, Japan, September 4-14, 1995).

    Science.gov (United States)

    National Inst. for Educational Research, Tokyo (Japan).

    This document summarizes proceedings of a meeting held in September 1995. The purpose of the meeting was to gather educators and policymakers in order to establish criteria concerning links between educational research and decision making. Twenty participants from the following countries attended: Argentina, Australia, Bahrain, Botswana, Brazil,…

  2. Planning meeting to form the CMSN Team: Building a unified computational model for the resonant X-ray scattering of strongly correlated materials. Final report

    International Nuclear Information System (INIS)

    van Veenendaal, M.

    2008-01-01

    The planning meeting was held May 21-23 2008 at Argonne National Laboratory (ANL). The purpose of the meeting was to establish a network on building computational model for resonant elastic and inelastic x-ray scattering. This course of action was recommended by program officer Dale Koelling after the initial submission of a proposal for a Computational Materials Science Network to Basic Energy Sciences. The meeting consisted of talks and discussion. At the end of the meeting three subgroups were formed. After the successful formation of the team, a new proposal was written which was funded by BES. Since this was a planning meeting there were no proceedings. The program and titles of talks are given.

  3. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equal Opportunities Commission 2. Adoption of the agenda 8. Registration plans for portables 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgar...

  4. ACCU Meeting

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Registration plans for portables 2. Adoption of the agenda 9. Reports from ACCU representatives 3. Minutes of the previous meeting on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. The Press Office 12. Agenda for the next meeting 7. Equal Opportunities Commission Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): AustriaW. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgari...

  5. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building 1. Chairman's remarks 2. Adoption of the agenda 3. News from the CERN Management 4. Minutes of the previous meeting 5. Matters arising 6. Report from the Scientific Information Policy Board 7. Report from ETT Division: The Press Office 8. Update on Computing Issues 9. Users' Office News 10. Any Other Business 11. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Bryan Pattison (Secretary). ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Z vada (75...

  6. ACCU MEETING

    CERN Multimedia

    Bryan Pattison

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 September 2000 At 10 a.m. in the 6th floor Conference Room, Main Building1. Chairman's remarks2. Adoption of the agenda3. News from the CERN Management4. Minutes of the previous meeting5. Matters arising6. Report from the Scientific Information Policy Board7. Report from ETT Division: The Press Office8. Update on Computing Issues9. Users' Office News10. Any Other Business11. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail toBryan Pattison(Secretary).ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :Austria G. Neuhofer (74094)Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)Czech Republic P. Závada (75877)Den...

  7. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The CERN Press Office An update on Safety at CERN The Burotel project Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denmark...

  8. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 March 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tThe CERN Press Office 7.\tAn update on Safety at CERN 8.\tThe Burotel project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel () Belgium C. Vander Velde (71539) Bulgaria C...

  9. In vitro techniques for selection of radiation induced mutations adapted to adverse environmental conditions. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-06-01

    success of this CRP can be measured from the development of improved lines and germplasm tolerant to saline and waterlogged soils or high temperature stress in potato, sweet potato and sugarcane. Much of the germplasm is at early stages of breeding, and would require large scale field evaluation before it can be released as an improved variety to the growers. This publications summarizes the results of the Co-ordinated Research Project, presented at the third and final Research Co-ordination Meeting, which was held at the invitation of the Shanghai Academy of Agricultural Sciences, Shanghai, China

  10. In vitro techniques for selection of radiation induced mutations adapted to adverse environmental conditions. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    success of this CRP can be measured from the development of improved lines and germplasm tolerant to saline and waterlogged soils or high temperature stress in potato, sweet potato and sugarcane. Much of the germplasm is at early stages of breeding, and would require large scale field evaluation before it can be released as an improved variety to the growers. This publications summarizes the results of the Co-ordinated Research Project, presented at the third and final Research Co-ordination Meeting, which was held at the invitation of the Shanghai Academy of Agricultural Sciences, Shanghai, China.

  11. A press for the theater

    Directory of Open Access Journals (Sweden)

    Luciana Penna França

    2017-12-01

    Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.

  12. Pressing technology for large bottoms

    International Nuclear Information System (INIS)

    Jilek, L.

    1986-01-01

    The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)

  13. MICROSTRUCTURAL ANALYSIS OF HOT ISOSTATICALLY PRESSED AL-SIC

    NARCIS (Netherlands)

    Bronsveld, P.M.; Hosson, J.Th. De; Sargent, M.A.; Alsem, W.H.M.

    1991-01-01

    The difference between extruded and hot isostatically pressed (HIP) Al6061 both with a T6 final heat treatment and with a 30 wt.% SiC particulate reinforcement is one of densification. The higher density of the HIP material is not translated into a stronger material. The Mg2Si precipitation is

  14. WordPress Website Development

    OpenAIRE

    Lassila, Joonas

    2016-01-01

    The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...

  15. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2012-01-01

    The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to

  16. Teach yourself visually WordPress

    CERN Document Server

    Majure, Janet

    2012-01-01

    Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full

  17. Development and field evaluation of animal feed supplementation packages. Proceedings of the final review meeting of an IAEA Technical Co-operation Regional AFRA Project

    International Nuclear Information System (INIS)

    2002-06-01

    evaluate reproductive performance in animals that are subjected to different feed supplementation strategies. It was, however, realised that this technique has potential to monitor and improve existing support services to livestock farmers such as artificial insemination and to introduce new services such as early diagnosis of non-pregnancy and infertility. In order to ensure future sustainability of the RIA for use in such applications, the work on the second component has now been taken under a new project (RAF/5/046). This publication contains the results presented by the scientists of National Agricultural Research Systems of African countries who participated in the Final Review meeting held in Cairo, Egypt from 25 to 29 November 2000, which dealt with only the nutrition component, Development and Field Evaluation of Feed Supplementation Strategies. This publication also contains some selected papers presented at the National Training Workshop on Field Evaluation and Development of the Dry Season Feed Supplementation Packages for Ruminant Animals in the Traditional Smallholder Farms organized with financial assistance from the IAEA, from 25 to 29 July 1999, in Lusaka, Zambia

  18. Final OptiMIR Scientific and Expert Meeting: From milk analysis to advisory tools (Palais des Congrès, Namur, Belgium, 16-17 April 2015

    Directory of Open Access Journals (Sweden)

    Friedrichs, P.

    2015-01-01

    phenotypic data of the cows and the MIR spectra from the European MR, which enables the detection of relevant phenotypic traits and their reflection in the MIR spectra. Additionally, a standardization has been installed among all instruments of the milk analyzing laboratories involved in the OptiMIR project to ensure a stable prediction over time and a correction of deviations. Due to the monthly standardization process the developed prediction equations can be used in routine on all instruments taking part in the standardization. Different models for the prediction of the pregnancy status, energy balance, the methane emission as well as the detection of ketosis and acidosis have been developed within OptiMIR. It is worth mentioning, that those models predict the status of the animal with different accuracies and that progress on development and implementation differs between the models. Some of the tools developed within OptiMIR are already used in the field and provide dairy farmers with useful information e.g. about the health status or methane emission of a certain cow. The OptiMIR project also resulted in a collaborative planning on an economic interest group formation of the participating MROs. The final OptiMIR scientific and expert meeting disseminates the results obtained through OptiMIR more detailed and also provides an overview of recent advances in the development of management tools for the dairy sector. Initial application of the MIR-based tools has shown their potential for providing dairy farmers with information to improve their herd management in a cost-effective way. However, further research and development is required to finish a greater extend of MIR-based tools so that north-western European stakeholders can acquire competitive advantage in the dairy sector.

  19. 2nd (final) IAEA research co-ordination meeting on 'charge exchange cross section data for fusion plasma studies'. Summary report

    International Nuclear Information System (INIS)

    Clark, R.E.H.

    2001-11-01

    The proceedings and conclusions of the 2nd Research Co-ordination Meeting on 'Charge Exchange Cross Section Data for Fusion Plasma Studies', held on September 25 and 26, 2000 at the IAEA Headquarters in Vienna, are briefly described. This report includes a summary of the presentations made by the meeting participants and a review of the accomplishments of the Co-ordinated Research Project (CRP). In addition, short summaries from the participants are included indicating the specific research completed in support of this CRP. (author)

  20. 2nd (final) IAEA research co-ordination meeting on 'plasma-material interaction data for mixed plasma facing materials in fusion reactors'. Summary report

    International Nuclear Information System (INIS)

    Clark, R.E.H.

    2001-11-01

    The proceedings and conclusions of the 2nd Research Co-ordination Meeting on 'Plasma-Material Interaction Data for Mixed Plasma Facing Materials in Fusion Reactors', held on October 16 and 17, 2000 at the IAEA Headquarters in Vienna, are briefly described. This report includes a summary of the presentations made by the meeting participants and a review of the accomplishments of the Co-ordinated Research Project (CRP). In addition, short summaries from the participants are included indicating the specific research completed in support of this CRP. (author)

  1. Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

    Directory of Open Access Journals (Sweden)

    Bo You

    2015-01-01

    Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

  2. Expert Meeting on National Planning of Documentation and Library Services in Africa (Kampala, Uganda, 7-15 December 1970). Final Report.

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France).

    The three objectives of this meeting are: (1) to evolve principles for the national planning of documentation and library services in African countries in relation to social, economic and educational plans; (2) to assess the documentation and library needs of African States and correlate a plan of development of these services for the region with…

  3. The Federal Role in Meeting the Education Needs of Chicanos and Puerto Ricans with Special Emphasis on Higher Education. Final Report.

    Science.gov (United States)

    Miranda (L.) and Associates, Bethesda, MD.

    Federal efforts to meet higher educational needs of Chicanos and Puerto Ricans are analyzed in this report. As part of a study conducted by L. Miranda and Associates, 15 Federal agencies were surveyed to determine their programs and their financial commitment to Hispanic postsecondary education, and the participation of Hispanics in each agency's…

  4. Report of the First Meeting of the Governing Board, SEAMEO Regional Centre for Education in Science and Mathematics (Penang, Malaysia, October 8-12, 1970). Final Report.

    Science.gov (United States)

    Southeast Asian Ministers of Education Organization (Singapore). Regional Center for Education in Science and Mathematics.

    This report details the proceedings of the first meeting of the Governing Board of the SEAMEO Regional Centre for Education in Science and Mathematics held in Penang, Malaysia from October 8-12, 1970. Procedural matters detailed in the report include: (1) the election of officers; (2) the acceptance of the annual report of the events and…

  5. Type synthesis for 4-DOF parallel press mechanism using GF set theory

    Science.gov (United States)

    He, Jun; Gao, Feng; Meng, Xiangdun; Guo, Weizhong

    2015-07-01

    Parallel mechanisms is used in the large capacity servo press to avoid the over-constraint of the traditional redundant actuation. Currently, the researches mainly focus on the performance analysis for some specific parallel press mechanisms. However, the type synthesis and evaluation of parallel press mechanisms is seldom studied, especially for the four degrees of freedom(DOF) press mechanisms. The type synthesis of 4-DOF parallel press mechanisms is carried out based on the generalized function(GF) set theory. Five design criteria of 4-DOF parallel press mechanisms are firstly proposed. The general procedure of type synthesis of parallel press mechanisms is obtained, which includes number synthesis, symmetrical synthesis of constraint GF sets, decomposition of motion GF sets and design of limbs. Nine combinations of constraint GF sets of 4-DOF parallel press mechanisms, ten combinations of GF sets of active limbs, and eleven combinations of GF sets of passive limbs are synthesized. Thirty-eight kinds of press mechanisms are presented and then different structures of kinematic limbs are designed. Finally, the geometrical constraint complexity( GCC), kinematic pair complexity( KPC), and type complexity( TC) are proposed to evaluate the press types and the optimal press type is achieved. The general methodologies of type synthesis and evaluation for parallel press mechanism are suggested.

  6. Pellet presses for remote fuel fabrication

    International Nuclear Information System (INIS)

    Densley, P.J.

    1978-01-01

    Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line

  7. Press to compress contaminated wastes drums

    International Nuclear Information System (INIS)

    Prevost, J.

    1993-01-01

    This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer

  8. IDEAL: ACADEMIC PRESS JOURNALS ONLINE

    CERN Multimedia

    The Library

    2001-01-01

    All Academic Press journals are available online to CERN users for a test period which will last until the end of July. The service 'IDEALIBRARY' includes 174 scientific journals that cover several domains, ranging from engineering to mathematics, computing and physics. Titles covered are among others 'Atomic Data and Nuclear Data Tables', 'Nuclear Data Sheets', 'Annals of Physics', 'Journal of Parallel and Distributed Computing'. Reference citations present in each article are linked to the corresponding full text, when the latter is published by a member of the CrossRef consortium (members are: Elsevier, APS, AIP and others). Therefore, the navigation between articles and references is uninterrupted. A search engine allows queries by author, title and publication year. See http://www.idealibrary.com. At present the Library is evaluating a site license offer proposed by the publisher.

  9. International Atomic Energy Agency's advisory group meeting on safeguards related to the final disposal of waste and spent fuel, Vienna, Austria, September 12-16, 1988: Foreign trip report

    International Nuclear Information System (INIS)

    Moran, B.W.

    1988-10-01

    B.W. Moran traveled to Vienna, Austria, during the period of September 12--16, 1988, to serve as the technical advisor to the US Department of Energy's (DOE's) Office of Civilian Radioactive Waste Management (OCRWM) representatives to the International Atomic Energy Agency's Advisory Group Meeting on ''Safeguards Related to the Final Disposal of Nuclear Material in Waste and Spent Fuel.'' The goal of the US representatives to this meeting was to ensure that the advisory group's recommendations established (1) an effective IAEA safeguards approach for all radioactive waste and spent fuel management facilities and (2) a safeguards approach that is appropriate for the US Federal Waste Management System. The principal concerns of the United States on entering the advisory group meeting were: criteria for the termination of safeguards on waste should not be established, but should be referred for further study, safeguards on spent fuel should not be terminated, and safeguards studies are required before IAEA safeguards approaches for spent fuel are established. The US representatives generally recommended that consultant meetings be convened to address the technical issues after the requisite safeguards related research and development tasks have been performed. These objectives of the US representatives were achieved, and the recommendations of the advisory group generally coincided with and extended the recommendations presented in the US position paper

  10. Natural Hazards and the press in the western Mediterranean region

    Directory of Open Access Journals (Sweden)

    M. Llasat-Botija

    2007-07-01

    Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  11. Professional WordPress design and development

    CERN Document Server

    Williams, Brad; Stern, Hal

    2014-01-01

    The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a

  12. Medicare program; appeals of CMS or CMS contractor determinations when a provider or supplier fails to meet the requirements for Medicare billing privileges. Final rule.

    Science.gov (United States)

    2008-06-27

    This final rule implements a number of regulatory provisions that are applicable to all providers and suppliers, including durable medical equipment, prosthetics, orthotics, and supplies (DMEPOS) suppliers. This final rule establishes appeals processes for all providers and suppliers whose enrollment, reenrollment or revalidation application for Medicare billing privileges is denied and whose Medicare billing privileges are revoked. It also establishes timeframes for deciding enrollment appeals by an Administrative Law Judge (ALJ) within the Department of Health and Human Services (DHHS) or the Departmental Appeals Board (DAB), or Board, within the DHHS; and processing timeframes for CMS' Medicare fee-for-service (FFS) contractors. In addition, this final rule allows Medicare FFS contractors to revoke Medicare billing privileges when a provider or supplier submits a claim or claims for services that could not have been furnished to a beneficiary. This final rule also specifies that a Medicare contractor may establish a Medicare enrollment bar for any provider or supplier whose billing privileges have been revoked. Lastly, the final rule requires that all providers and suppliers receive Medicare payments by electronic funds transfer (EFT) if the provider or supplier, is submitting an initial enrollment application to Medicare, changing their enrollment information, revalidating or re-enrolling in the Medicare program.

  13. Influence of press temperature on the properties of binderless particleboard made from oil palm trunk

    International Nuclear Information System (INIS)

    Hashim, Rokiah; Said, Norafizah; Lamaming, Junidah; Baskaran, Mohana; Sulaiman, Othman; Sato, Masatoshi; Hiziroglu, Salim; Sugimoto, Tomoko

    2011-01-01

    Research highlights: → Influence of press temperature on binderless particleboard of oil palm trunk. → Modulus of rupture increased with increasing press temperature. → The internal bond strength of samples meets JIS standard. → Water absorption and thickness swelling improved. → Increasing pressing temperature improve properties of the boards. -- Abstract: The objective of this investigation was to evaluate the properties of binderless particleboard manufactured from oil palm trunk as a function of press temperature. Particleboard samples were manufactured with a target density of 0.80 g/cm 3 using press temperatures of 160 o C, 180 o C and 200 o C. The modulus of rupture, internal bond strength, water absorption and thickness swelling of the boards were determined based on Japanese Industrial Standards (JIS). Thermal gravimetric analysis, Fourier transform infrared spectroscopy and field-emission scanning electron microscopy coupled with energy dispersive X-ray analysis were employed to characterize the properties of the raw materials and the manufactured panels. The moduli of rupture of the samples were observed to increase with increasing press temperature, but they did not meet the standard values. However, the internal bond strength of the samples attained satisfactory values according to the JIS standard for all three temperature levels. Water absorption and thickness swelling of the boards decreased with increasing pressing temperature. Based on the findings in this study, increasing the pressing temperature may be considered a potential way of improving the properties of binderless particleboard.

  14. Fabrication and testing of ceramic UO{sub 2} fuel - I-III. Part II, Fabrication of sintered pressed samples UO{sub 2} (Final report); Izrada i ispitivanje keramickog goriva na bazi UO{sub 2}- I-III, II Deo - Dobijanje sinterovanih ispresaka UO{sub 2} (zavrsni izvestaj)

    Energy Technology Data Exchange (ETDEWEB)

    Novakovic, M; Ristic, M M [Institute of Nuclear Sciences Boris Kidric, Laboratorija za termotehniku reaktora, Vinca, Beograd (Serbia and Montenegro)

    1961-12-15

    Procedure for fabrication of sintered ceramic UO{sub 2} pellets was developed in the Department of reactor materials. The tasks described in this report deal with design and construction of laboratory equipment for treatment of ceramic materials, and fabrication of UO{sub 2} pellets. The procedure was based on cold pressing of appropriately prepared powder and sintering of the of thus obtained pressed samples.

  15. Towards a more responsible press

    Directory of Open Access Journals (Sweden)

    Taimur ul Hassan

    2012-12-01

    Full Text Available The article analyses Pakistan’s newspapers’ performance with regard to civil society in2003 by using content analysis approach. There is no gainsaying that a strong civil society guaranteesa strong democracy. In Pakistan, spells of military rule have stunted the growth of democracy,adversely affecting civil society. Media too has suffered as a result. Normative theories of media callfor laying down norms and conventions for media. In democracy, all sections of society should berepresented in media. In Pakistan’s case, due to military regimes and quasi democratic governments,combined with the demands of market economy, the media have largely not been able to fulfill thisresponsibility towards society. Social Responsibility demands that the media must fulfill itsresponsibility towards society, while giving a free space to all voices of society. In Pakistan, whethernewspapers played that role in 2003 when civil society had accelerated its campaign to end honorkillings and crimes against women is investigated. The findings show that newspapers did supportcivil society, showing a gradual movement towards a more responsible press.

  16. Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press

    OpenAIRE

    Mikosz, Joanna

    2016-01-01

    In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...

  17. Co-ordinated research project on comparative international studies of osteoporosis using isotope techniques. Report on the final research co-ordination meeting

    International Nuclear Information System (INIS)

    2002-01-01

    In 1994, the International Atomic Energy Agency started the five-year Co-ordinated Research Project (CRP) on Comparative International Studies of Osteoporosis Using Isotope Techniques. The objectives of this study were: To harmonize the techniques of measuring BMD within the participating countries and to obtain data that can be compared between the different study groups (countries); To determine whether early adult PBM varies between populations over the age range from 15 to 50 years. In other words, to determine the age of peak bone mass in selected populations from developing countries; To explore environmental and nutritional contributions to any determined differences. Further information about the purpose and scope of the CRP may be found in the report of the Advisory Group Meeting (AGM) held in 19921 and other reports of this CRP. The fourth Research Co-ordination Meeting (RCM) for participants of the CRP, which is the subject of the present report, was held at the University of Sheffield Medical School; WHO Collaborating Center for Metabolic Bone Diseases in Sheffield, UK from 28 Feb. to 3 March 2000

  18. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib

  19. Fourth and final research co-ordination meeting for the coordinated research project on 'Comparative international studies of osteoporosis using isotopic techniques'. Summary report

    International Nuclear Information System (INIS)

    Iyengar, G.V.; Mokhtar, N.

    2002-01-01

    In 1994, the International Atomic Energy Agency started the five-year Co-ordinated Research Project (CRP) on Comparative International Studies of Osteoporosis Using Isotope Techniques. The objectives of this study were: To harmonize the techniques of measuring BMD within the participating countries and to obtain data that can be compared between the different study groups (countries); To determine whether early adult PBM varies between populations over the age range from 15 to 50 years. In other words, to determine the age of peak bone mass in selected populations from developing countries; To explore environmental and nutritional contributions to any determined differences. Further information about the purpose and scope of the CRP may be found in the report of the Advisory Group Meeting (AGM) held in 19921 and other reports of this CRP. Since the last RCM held in 1998, the CRP participants have gathered up more data on BMD. Indeed 3488 subjects 15-50 years) have been recruited for the purpose of this project and have been stratified equally by sex and age into six -year age bands. Most of the participants have also completed collecting data on dietary intake, medical history, physical exercise, and lifestyle, as suggested in the VrHO questionnaire. Some participants have analyzed trace elements in a number of bone samples as well. One of the most important purposes of this CRP is to obtain harmonized data on BMD that is comparable from one study group to another. To ensure this quality insurance, the densitometers in each center were cross calibrated using a European Spine Phantom (ESP). Further-more, day-to-day control of DEXA machines was managed by each individual center. The fourth Research Co-ordination Meeting (RCM) for participants of the CRP, which is the subject of the present report, was held at the University of Sheffield Medical School; WHO Collaborating Center for Metabolic Bone Diseases in Sheffield, UK from 28 Feb. to 3 March 2000

  20. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    OpenAIRE

    Georgia Kate Chapman

    2015-01-01

    This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...

  1. 75 FR 22432 - Sunshine Act Meetings; Notice

    Science.gov (United States)

    2010-04-28

    ... 2010 and Press Coverage. Expert Input on Measuring Scientific Knowledge and Understanding for... Program Review. [cir] International State of the Arctic Meeting. Discussion Item: Review of NSB Policy on...

  2. Efeitos de diferentes volumes correntes e da pressão expiratória final positiva sobre a troca gasosa na fístula broncopleural experimental Effects of different tidal volumes and positive end expiratory pressure on gas exchange in experimental bronchopleural fistula

    Directory of Open Access Journals (Sweden)

    Maria Gabriela Cavicchia Toneloto

    2008-09-01

    Full Text Available OBJETIVO: O presente estudo foi desenhado para identificar o efeito da pressão expiratória final positiva (PEEP e o volume corrente pulmonar ideal para ventilar animais com fístula broncopleural produzida cirurgicamente, com o intuito de reduzir a vazão da fístula sem afetar a troca gasosa. MÉTODOS: Avaliação hemodinâmica e respiratória da troca gasosa foi obtida em cinco porcos jovens, saudáveis, da linhagem Large White, ventilados mecanicamente no modo ventilatório volume controlado com FiO2 de 0.4 e relação inspiração:expiração em torno de 1:2, com freqüência respiratória mantida em 22 cpm. A fístula broncopleural foi produzida pela ressecção da língula. Um sistema de drenagem a selo d'água foi instalado e o tórax foi hermeticamente fechado. A troca gasosa e o débito da fístula broncopleural foram medidos com animais ventilados sequencialmente com volumes correntes de 4 ml/kg, 7 ml/kg e 10 ml/Kg alternando zero de pressão expiratória final positiva (ZEEP e PEEP de 10 cmH2O, sempre na mesma ordem. RESULTADOS: Esses dados são atribuídos à ventilação alveolar reduzida e às anormalidades da ventilação/perfusão que foram atenuadas com volumes correntes mais altos. PEEP aumentou o vazamento de ar pela fístula, mesmo com baixos volumes, de 2.0 ± 2,8mL para 31 ± 20,7mL (p= 0,006 e diminuiu a ventilação alveolar em todos os volumes correntes. A ventilação alveolar melhorou com altos volumes correntes, mas aumentou o débito da fístula (4 ml/kg - 2,0 ± 2,8mL e 10 mL/kg - 80,2 ± 43,9mL; p=0,001. Baixos volumes correntes resultaram em hipercapnia (ZEEP - 83,7± 6,9 mmHg e com PEEP 10 -93 ± 10,1mmHg e diminuição significativa da saturação de oxigênio arterial, em torno de 84%. CONCLUSÃO: O volume corrente de 7 ml/kg com ZEEP foi considerado o melhor volume corrente, visto que, apesar da hipercapnia moderada, a saturação de oxigênio arterial é sustentada em torno de 90%. A ventilação alveolar

  3. Microplasticity in hot-pressed beryllium

    International Nuclear Information System (INIS)

    Plane, D.C.; Bonfield, W.

    1977-01-01

    Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)

  4. WordPress 3.7 complete

    CERN Document Server

    Król, Karol

    2013-01-01

    WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

  5. Activation of Selected Core Muscles during Pressing

    Directory of Open Access Journals (Sweden)

    Thomas W. Nesser

    2015-10-01

    Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training

  6. Hot isostatic press waste option study report

    International Nuclear Information System (INIS)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065

  7. Hot isostatic press waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  8. Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

    Science.gov (United States)

    Sülleiová, K.; Ballóková, B.; Besterci, M.; Kvačkaj, T.

    2017-12-01

    The development of the nanostructure in commercial pure copper and the strength and ductility after severe plastic deformation (SPD) with the technology of equal channel angular pressing (ECAP) are analysed. Experimental results and analyses showed that both strength and ductility can be increased simultaneously by SPD. The final grain size decreased from the initial 50μm by SPD to 100-300 nm after 10 passes. An increase of the ductility together with an increase of strength caused by SPD are explained by a strong grain refinement and by a dynamic equilibrium of weakening and strengthening, and it is visible on the final static tensile test stress-strain charts.

  9. Study of the impact of food irradiation on preventing losses: Experience in Africa. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2002-05-01

    There have been positive developments on food irradiation in different regions of the world, especially in the United States of America and several Asian and Latin American countries. In some countries in Africa, this technology has been studied in the past few decades with encouraging results. To assist these countries in conducting pilot scale research and development on irradiation of specific commodities of interest to them including market testing and feasibility to establish commercial irradiators for multi-purpose application, a Coordinated Research Project (CRP) on Impact of Irradiation to Prevent Food Losses in Africa was carried out between 1995 and 1999. This CRP demonstrated that food irradiation has a potential to reduce losses of basic staple food crops including yams, dried and smoked fish, potatoes and onions through pilot scale experiments carried out in some African countries. Small scale market testing of such irradiated food such as spices, potatoes and onions showed encouraging results. In some countries (Cote d'Ivoire, Egypt, Ghana, Senegal and South Africa), it is feasible to establish commercial irradiation facilities for treating food. In Morocco, irradiation shows a potential to meet quarantine requirements in international food trade. It should be noted that commercial scale application of irradiation of some food products has been carried out in South Africa since the 1980s

  10. Study of the impact of food irradiation on preventing losses: Experience in Africa. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-05-01

    There have been positive developments on food irradiation in different regions of the world, especially in the United States of America and several Asian and Latin American countries. In some countries in Africa, this technology has been studied in the past few decades with encouraging results. To assist these countries in conducting pilot scale research and development on irradiation of specific commodities of interest to them including market testing and feasibility to establish commercial irradiators for multi-purpose application, a Coordinated Research Project (CRP) on Impact of Irradiation to Prevent Food Losses in Africa was carried out between 1995 and 1999. This CRP demonstrated that food irradiation has a potential to reduce losses of basic staple food crops including yams, dried and smoked fish, potatoes and onions through pilot scale experiments carried out in some African countries. Small scale market testing of such irradiated food such as spices, potatoes and onions showed encouraging results. In some countries (Cote d'Ivoire, Egypt, Ghana, Senegal and South Africa), it is feasible to establish commercial irradiation facilities for treating food. In Morocco, irradiation shows a potential to meet quarantine requirements in international food trade. It should be noted that commercial scale application of irradiation of some food products has been carried out in South Africa since the 1980s.

  11. Use of isotopic tracers in studies of herbicides performance on grasses and sedges. Report of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    Herbicide products as sold to the user are a mixture or formulation of active ingredient, surfactants and other adjuvants, plus a carrier, which will be a liquid if the formulation is to be applied as a spray. The adjuvants affect the characteristics of the spray, including the retention of the droplets by plant surfaces and the penetration of active ingredient into the plant. Thus they play a critical part in determining the phototoxicity and selectivity of the product. The IAEA organized a co-ordinated research programme in 1992 to explore the possibility of improving the performance of the herbicide glyphosate on Cyperus rotundus (purple nutsedge), commonly regarded as the ``world`s worst weed``, by modifying the commercial formulation using penetration studies with {sup 14}C labelled glyphosate as the initial screening procedure. This TECDOC summarizes the outcome of the programme and includes the papers presented at the research co-ordination meeting held in Los Banos, Philippines, 17-21 February 1997. The co-operation of the Monsanto Company, the manufacturer of the glyphosate herbicide, is gratefully acknowledged. Refs, figs, tabs.

  12. Use of isotopic tracers in studies of herbicides performance on grasses and sedges. Report of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1998-02-01

    Herbicide products as sold to the user are a mixture or formulation of active ingredient, surfactants and other adjuvants, plus a carrier, which will be a liquid if the formulation is to be applied as a spray. The adjuvants affect the characteristics of the spray, including the retention of the droplets by plant surfaces and the penetration of active ingredient into the plant. Thus they play a critical part in determining the phototoxicity and selectivity of the product. The IAEA organized a co-ordinated research programme in 1992 to explore the possibility of improving the performance of the herbicide glyphosate on Cyperus rotundus (purple nutsedge), commonly regarded as the ''world's worst weed'', by modifying the commercial formulation using penetration studies with 14 C labelled glyphosate as the initial screening procedure. This TECDOC summarizes the outcome of the programme and includes the papers presented at the research co-ordination meeting held in Los Banos, Philippines, 17-21 February 1997. The co-operation of the Monsanto Company, the manufacturer of the glyphosate herbicide, is gratefully acknowledged

  13. Teenagers as Victims in the Press

    Science.gov (United States)

    Andersson, Gunvor; Lundstrom, Tommy

    2007-01-01

    Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

  14. Communicators take nine Virginia Press Women awards

    OpenAIRE

    Owczarski, Mark

    2008-01-01

    Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.

  15. 1979: The Campus Student Press in America.

    Science.gov (United States)

    Ingelhart, Louis E.

    1979-01-01

    Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…

  16. A virtual model of the bench press exercise.

    Science.gov (United States)

    Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

    2009-08-07

    The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

  17. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Clara Staples

    2016-06-01

    Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.

  18. World Radiopharmaceutical Therapy Council: A report on the 5th International Radiopharmaceutical Therapy Colloquium and the Final Planning Meeting of the World Radiopharmaceutical Therapy Council held at Santiago, Chile, 29 September, 2002

    International Nuclear Information System (INIS)

    Turner, J.V.

    2003-01-01

    -stenosis of coronary arteries following balloon angioplasty was presented by Achim Kropp of Dresden, Amalia Peix of Havana, and June-Key Chung from Seoul who also reported encouraging radiation synovectomy results. Hans Biersack described preliminary studies from Bonn with 188Re MAG3 RC-160 and 188Re-DOTATOC radiopeptides and the potential clinical applications of other 188Re radiopharmaceuticals for radiopeptide therapy and radioimmunotherapy were contemplated, given the daily on-site supply of radionuclide from the 188W/188Re generator. The Final Planning Meeting of the World Radiopharmaceutical Therapy Council, chaired by Harvey Turner, was held during the last session of the Colloquium and discussion was facilitated by a panel of members of the International Task Force of the Council comprising Horacio Amaral, Suresh Srivastava and Alan Perkins. A Preliminary Draft Charter of the World Radiopharmaceutical Therapy Council had been prepared by the Task Force with notable contributions from Sandy McEwan and Chaitanya Divgi and had been circulated to all attendees of the Foundation Planning Meeting of the Council held during the Annual Scientific Meeting of the Society of Nuclear Medicine, June 2001 in Toronto. This draft document was presented for detailed discussion at the Final Planning Meeting in Chile and embodied the principles of global cooperation in therapeutic nuclear medicine outlined in the first issue of the Journal. A Consensus Draft Charter subsequently prepared by the International Task Force was then submitted to the Assembly of Delegates of the World Federation of Nuclear Medicine and Biology on 1st October 2002. The proposal that the World Radiopharmaceutical Therapy Council become an affiliated body of the World Federation of Nuclear Medicine and Biology was adopted without dissent, having been proposed by the President, Horacio Amaral and supported by the Incoming President, Myung Chul Lee. The World Radiopharmaceutical Therapy Council will become an

  19. Diagnosis and epidemiology of animal diseases in Latin America. Proceedings of the final research co-ordination meetings of FAO/IAEA/SIDA co-ordinated research projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    In 1986 the Animal Production and Health Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture embarked on a programme of support to scientists in developing countries focused on improving animal disease diagnosis through the use of nuclear and related technologies. As part of this programme the Swedish International Development Authority (SIDA) agreed to provide support for a FAO/IAEA Co-ordinated Research Project (CRP) concerned with the introduction and use of such technologies in Latin America. Through this programme, which was entitled Regional Network for Latin America on Animal Disease Diagnosis Using Immunoassays and Labeled DNA Probe Techniques, studies were supported on a number of diseases considered to be of substantial economic and social importance to the region, including brucellosis, tuberculosis, babesiosis, leukosis, bluetongue and chlamydia infection in cattle and psedorabies in pigs. One significant conclusion was that large number of diseases studied limited research findings owing to the lack of a critical mass of scientists studying any one specific disease problem. Thus when in 1991, SIDA agreed to follow-up CRP on Immunoassay Methods for the Diagnosis and Epidemiology of Animal Diseases in Latin America, the work was restricted to three diseases, i.e. foot-and-mouth disease (FMD), bovine brucellosis and bovine babesiosis. In 1994 results were presented in Guadeloupe, Lesser Antilles, France. The outcome of this meeting was the validation of ELISAs for the above mentioned diseases and a recommendation that future research should focus on diagnosis and epidemiology to support existing control and eradication campaigns against the two diseases of major importance in the region (FMD and Brucellosis). A follow-up CRP (1994-1997) entitled the Use of ELISA for Epidemiology and Control of Foot-and-Mouth Disease and Bovine Brucellosis in Latin America focused on the further validation and subsequent use of a

  20. Radioimmunoassay and related techniques to improve artificial insemination programmes for cattle reared under tropical and sub-tropical conditions. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    Artificial insemination (AI) is widely used for improvement of cattle production in developed countries. Its use in developing countries is less widespread and the results obtained are far from satisfactory. Under tropical small-farm conditions, a number of socio-economic, organizational, biological and technical factors make the service more difficult to provide and also less efficient. If the major constraints can be identified and overcome, this technology would become more widely adopted and contribute to an increased production of milk and meat, leading to better food security and poverty alleviation. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture therefore convened a consultants meeting in May 1994 to advise on the applicability of radioimmunoassay (RIA) for measuring progesterone in milk of dairy cattle to identify the major causes of conception failure and reproductive wastage when AI is used under the conditions prevailing in developing countries. The consultants recommended the initiation of a co-ordinated research project (CRP) on this topic, and developed a comprehensive technical document including the sampling protocol and the range of information that needs to be recorded in order to obtain conclusive results. A five year CRP on the ''Use of RIA and Related Techniques to Identify Ways of Improving Artificial Insemination Programmes for Cattle Reared Under Tropical and Sub-Tropical Conditions'' was initiated in early 1995. The CRP resulted in the development and standardization of methodologies and protocols, including the computer software program termed AIDA (Artificial Insemination Database Application), to determine current status and identify constraints. These methodologies and protocols are now being applied on a wider scale in Member States through regional TC projects in Asia and Africa and country TC projects in Latin America. Contributing to the wider application of progesterone RIA for field level problem solving

  1. Diagnosis and epidemiology of animal diseases in Latin America. Proceedings of the final research co-ordination meetings of FAO/IAEA/SIDA co-ordinated research projects

    International Nuclear Information System (INIS)

    1998-11-01

    In 1986 the Animal Production and Health Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture embarked on a programme of support to scientists in developing countries focused on improving animal disease diagnosis through the use of nuclear and related technologies. As part of this programme the Swedish International Development Authority (SIDA) agreed to provide support for a FAO/IAEA Co-ordinated Research Project (CRP) concerned with the introduction and use of such technologies in Latin America. Through this programme, which was entitled Regional Network for Latin America on Animal Disease Diagnosis Using Immunoassays and Labeled DNA Probe Techniques, studies were supported on a number of diseases considered to be of substantial economic and social importance to the region, including brucellosis, tuberculosis, babesiosis, leukosis, bluetongue and chlamydia infection in cattle and psedorabies in pigs. One significant conclusion was that large number of diseases studied limited research findings owing to the lack of a critical mass of scientists studying any one specific disease problem. Thus when in 1991, SIDA agreed to follow-up CRP on Immunoassay Methods for the Diagnosis and Epidemiology of Animal Diseases in Latin America, the work was restricted to three diseases, i.e. foot-and-mouth disease (FMD), bovine brucellosis and bovine babesiosis. In 1994 results were presented in Guadeloupe, Lesser Antilles, France. The outcome of this meeting was the validation of ELISAs for the above mentioned diseases and a recommendation that future research should focus on diagnosis and epidemiology to support existing control and eradication campaigns against the two diseases of major importance in the region (FMD and Brucellosis). A follow-up CRP (1994-1997) entitled the Use of ELISA for Epidemiology and Control of Foot-and-Mouth Disease and Bovine Brucellosis in Latin America focused on the further validation and subsequent use of a

  2. Use of immunoassay technologies for the diagnosis and control of foot-and-mouth disease in Southeast Asia. Proceedings of a final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The IAEA and FAO, through the activities of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture and their technical co-operation programmes, support the introduction of nuclear and related techniques to improve animal disease diagnosis and surveillance in developing countries. At a workshop hosted by the Australian Centre for International Agricultural Research (ACIAR) and the Department of Livestock Development (DLD) of Thailand, in Lampang, Thailand, in September 1993, an analysis of the results of an ACIAR project on foot-and-mouth disease (FMD) as well as national reports from twelve other Asian countries clearly demonstrated that the control and eradication of FMD in Asia is both a national and regional problem (vaccination alone costs in the region US $380 million annually). It was concluded that a co-ordinated regional approach was the only realistic way forward for controlling and eventually eradicating FMD from the region. It was agreed that the OIE would lead this co-ordinated regional programme in close co-operation with FAO, ACIAR, other relevant international organizations and national governments. Results of the ACIAR Project also clearly demonstrated the immense value of ELISA based systems for the diagnosis and control of FMD within Thailand. The meeting, therefore, recommended that an essential component of a regional strategy was to have, as a minimum, ELISA tests for the detection of FMD virus and for assessing the antibody status of livestock population in each country in the region. In support of this concept, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture established a co-ordinated research project (CRP) with the primary aim of establishing and documenting appropriate mechanisms for introducing and using ELISA based technologies for FMD diagnosis and surveillance in participating countries. At the completion of this Project, the region is left with a national ELISA based diagnostic facility in

  3. Use of immunoassay technologies for the diagnosis and control of foot-and-mouth disease in Southeast Asia. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2000-05-01

    The IAEA and FAO, through the activities of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture and their technical co-operation programmes, support the introduction of nuclear and related techniques to improve animal disease diagnosis and surveillance in developing countries. At a workshop hosted by the Australian Centre for International Agricultural Research (ACIAR) and the Department of Livestock Development (DLD) of Thailand, in Lampang, Thailand, in September 1993, an analysis of the results of an ACIAR project on foot-and-mouth disease (FMD) as well as national reports from twelve other Asian countries clearly demonstrated that the control and eradication of FMD in Asia is both a national and regional problem (vaccination alone costs in the region US $380 million annually). It was concluded that a co-ordinated regional approach was the only realistic way forward for controlling and eventually eradicating FMD from the region. It was agreed that the OIE would lead this co-ordinated regional programme in close co-operation with FAO, ACIAR, other relevant international organizations and national governments. Results of the ACIAR Project also clearly demonstrated the immense value of ELISA based systems for the diagnosis and control of FMD within Thailand. The meeting, therefore, recommended that an essential component of a regional strategy was to have, as a minimum, ELISA tests for the detection of FMD virus and for assessing the antibody status of livestock population in each country in the region. In support of this concept, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture established a co-ordinated research project (CRP) with the primary aim of establishing and documenting appropriate mechanisms for introducing and using ELISA based technologies for FMD diagnosis and surveillance in participating countries. At the completion of this Project, the region is left with a national ELISA based diagnostic facility in

  4. Radioimmunoassay and related techniques to improve artificial insemination programmes for cattle reared under tropical and sub-tropical conditions. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    2001-05-01

    Artificial insemination (AI) is widely used for improvement of cattle production in developed countries. Its use in developing countries is less widespread and the results obtained are far from satisfactory. Under tropical small-farm conditions, a number of socio-economic, organizational, biological and technical factors make the service more difficult to provide and also less efficient. If the major constraints can be identified and overcome, this technology would become more widely adopted and contribute to an increased production of milk and meat, leading to better food security and poverty alleviation. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture therefore convened a consultants meeting in May 1994 to advise on the applicability of radioimmunoassay (RIA) for measuring progesterone in milk of dairy cattle to identify the major causes of conception failure and reproductive wastage when AI is used under the conditions prevailing in developing countries. The consultants recommended the initiation of a co-ordinated research project (CRP) on this topic, and developed a comprehensive technical document including the sampling protocol and the range of information that needs to be recorded in order to obtain conclusive results. A five year CRP on the ''Use of RIA and Related Techniques to Identify Ways of Improving Artificial Insemination Programmes for Cattle Reared Under Tropical and Sub-Tropical Conditions'' was initiated in early 1995. The CRP resulted in the development and standardization of methodologies and protocols, including the computer software program termed AIDA (Artificial Insemination Database Application), to determine current status and identify constraints. These methodologies and protocols are now being applied on a wider scale in Member States through regional TC projects in Asia and Africa and country TC projects in Latin America. Contributing to the wider application of progesterone RIA for field level problem solving

  5. Pressing Issues of Disability Employment

    Directory of Open Access Journals (Sweden)

    Shabunova Aleksandra Anatol’evna

    2017-01-01

    Full Text Available Disability employment is a major tool for creating inclusive society. In Russia, the main obstacles to employment of the disabled are imperfect statutory measures aimed at improving competitiveness of this population group in the labor market; low prestige of jobs for people with disabilities; the employers’ unwillingness to hire disabled people. The purpose of this study is to determine the barriers disabled people face on the labor market and to justify the expedience of investing public funds in activities aimed at promoting disabled employment. Works of Russian and foreign authors, national statistics, results of sociological surveys of the population and people with disabilities conducted on the territory of the Vologda Oblast in 2013–2015 represent the information base of the study. The article reviews the impact of employment quotas for the disabled; in particular, it has been established that the number of the employed under such quotas during the period from 2008 to 2014 has declined. Based on the results of domestic research the authors have determined the reasons underlying lack of effectiveness of this social policy tool. One of the problems of promoting disability employment is training and re-training of the disabled. According to official statistics, only 38% of the employed disabled who live in a city are employed in the area of their specialty. At the same time, the results of research h of Russian authors show that training of an expert (even with consideration of their health capacities pays off within 4 years. Using the example of the Vologda Oblast, the authors show that annual tax revenues in employment of the disabled to jobs with wages close to the regional average may reach 33 million rubles. They also estimate the approximate regional cost of workplace equipment for the disabled. Finally, the authors propose a list of key courses of action on increasing competitiveness of the disabled in the labor market

  6. Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

    Directory of Open Access Journals (Sweden)

    Gaspar S.

    2016-06-01

    Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

  7. WordPress web design for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a

  8. Teach yourself visually complete WordPress

    CERN Document Server

    Majure, Janet

    2013-01-01

    Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a

  9. WordPress 24-Hour Trainer

    CERN Document Server

    Plumley, George

    2011-01-01

    The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching

  10. WordPress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2013-01-01

    An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

  11. Professional WordPress Plugin Development

    CERN Document Server

    Williams, Brad; Tadlock, Justin

    2011-01-01

    Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic

  12. Study of Servo Press with a Flywheel

    Science.gov (United States)

    Tso, Pei-Lum; Li, Cheng-Ho

    The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.

  13. WordPress 3 For Business Bloggers

    CERN Document Server

    Thewlis, Paul

    2011-01-01

    This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.

  14. Denmark, Democracy and the Free Press

    DEFF Research Database (Denmark)

    Breiting, Søren

    2006-01-01

    What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....

  15. The Liberal Struggle for Press Freedom

    DEFF Research Database (Denmark)

    Mogensen, Kirsten

    In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....

  16. Chip compacting press; Jido kirikuzu asshukuki

    Energy Technology Data Exchange (ETDEWEB)

    Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)

    1998-08-15

    The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.

  17. Press freedom, oil exports, and risk for natural disasters: a challenge for climato-economic theory?

    Science.gov (United States)

    Arantes, Joana; Grace, Randolph C; Kemp, Simon

    2013-10-01

    Does the interaction between climactic demands, monetary resources, and freedom suggest a more general relationship between the environmental challenges that human societies face and their resources to meet those challenges? Using data on press freedom (Van de Vliert 2011a), we found no evidence of a similar interaction with natural resources (as measured by oil exports) or risk for natural disasters.

  18. Areva - Press release from the Supervisory Board

    International Nuclear Information System (INIS)

    Marie, Patricia; Briand, Pauline; Floquet-Daubigeon, Fleur; Michaut, Maxime; Scorbiac, Marie de; Repaire, Philippine du

    2012-01-01

    During its meeting held on December 12, 2011, devoted in particular to the examination of the 2011 closing estimates, the AREVA Executive Board indicated that it expected to book a provision of 1.46 billion euros (2.025 billion US dollars) in the company's accounts for fiscal year 2011 for impairment of assets for the reporting entity UraMin, a mining company acquired by AREVA in 2007, which, given the provision booked in 2010 (426 million euros), brings the value of these assets on the AREVA balance sheet down to 410 million euros. Given the size of these provisions, the Supervisory Board decided to make three of its members, meeting as an ad hoc committee, in charge of analyzing the terms of acquisition of this company, as well as the key decisions made in this reporting entity up to 2011 and, based on the outcome of these analyses, to recommend to it any appropriate measures in AREVA's interest. This committee reported on its work during the Supervisory Board meeting held on February 14, 2012. In light of this report, the Supervisory Board found that the fairness and reliability of the financial statements of previous years were not in question. Nevertheless, considering the malfunctions raised, the Board considers it appropriate to thoroughly review AREVA's governance in order to ensure that decisions concerning large acquisitions or investments be reviewed and validated in the future under conditions ensuring better legal and financial security and enabling a more transparent dialogue between management and the Supervisory Board. It thus asked the Executive Board to recommend, at the next General Meeting of Shareholders, that the by-laws of the company be modified to make the Supervisory Board's prior approval of investments, stake acquisitions and acquisitions mandatory above a threshold of 20 million euros. It also decided to set up a business ethics committee within the Supervisory Board responsible for ensuring that rules of conduct are properly applied

  19. Tribologic analysis and technical innovation for rotary molding press

    International Nuclear Information System (INIS)

    Luo Wei; Bai Yumeng; Dai Xingjian

    2012-01-01

    The rotary molding press R53C-Y is the key facility in the compression molding working procedure of the nu clear fuel pellets. Its main compression assembly called the upper compression roller frame has been worn seriously during the production. At first, the mechanical model of the upper compression roller assembly was established for analysis and calculation physical strength. Then the wear causations of the upper compression roller frame were analyzed, and the existent problems of central lubrication system were discussed. Finally, Oil-air central lubrication system was designed considering the characteristic of nuclear fuel pellets production. (authors)

  20. The LNG industry in 2011. Press revue

    International Nuclear Information System (INIS)

    2012-05-01

    The outlook of the LNG industry in 2011 is presented as a revue of press articles: The role of LNG as a flexible and secure energy source as well as the prompt response to provide back-up through additional supplies and cargo diversions to compensate for the sudden loss of nuclear capacity in Japan - with sellers exercising due price restraint in view of the human tragedy - has been a credit to the industry. The increase in production capacity in 2009 and 2010, in particular from Qatar, had permitted the necessary buffer to cope much better with the demand surge than during past disruptions (such as the aftermath of the Chuetsu earthquake in late 2007). Undoubtedly, the marked shift over the last decade in the industry's prevailing business model towards global trade, destination flexibility and portfolio play has also facilitated the rapid response. As the total volume of LNG trade is very much determined by the availability of supply, 2011 has seen a growth of 9.4% over 2010, mainly as a result of the full availability of the six Qatar mega-trains over the past year. On the demand side the two traditional basins have shown very contrasting trends: 15% higher LNG off-take in Asia (the five major markets all increasing between 37.4% and 8.9%), versus a 1.7% decrease in the Atlantic Basin. Cargo diversions and an increasing number of reloads have boosted the exports from the Atlantic Basin to Asia in 2011 to more than 14 million tons (equivalent to more than 200 large size cargoes). Remarkable is also the fast growth in new markets in Latin America and in the Middle East - albeit from a small base - with counter-seasonal but varying demand, offering attractive arbitrage opportunities to portfolio play. Not surprising then that 2011 has seen another hike in spot and short-term trade, not just in absolute terms but also as a percentage of total trade (50% over 2010, 25.4% of total trade). The outlook for LNG is strong and its global demand prospects further

  1. Use of irradiation to ensure the hygienic quality of fresh, pre-cut fruits and vegetables and other minimally processed food of Plant Origin. Proceedings of a final research coordination meeting

    International Nuclear Information System (INIS)

    2006-12-01

    Sales and consumption of fresh pre-cut and minimally processed fruits and vegetables continue to grow. Changes occurring in life and eating styles, as well as demographic changes, have been cited as one of the reasons for the increasing demand for this type of produce. Since fresh fruits and vegetables are grown, processed or packaged in areas that may be exposed to microbial pathogen contamination, there is an increasing concern that these products may harbour microbial pathogens. In fact, a number of outbreaks linked to the consumption of contaminated fresh pre-cut fruits and vegetables have been reported. Prior to this Coordinated Research Project (CRP), studies on various chemical and physical methods of decontamination for their efficacy in destroying pathogens have been made. The use of ionizing radiation seems to have several advantages in relation to other alternative treatments; however more research was needed in order to demonstrate its efficacy without producing negative effects in the physiological traits of the fruit, and thus the commercial quality of these products. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated in 2001 a Coordinated Research Project (CRP) on the Use of Irradiation to Ensure Hygienic Quality of Fresh, Pre-cut Fruits and Vegetables and other Minimally Processed Food of Plant Origin. This CRP included 15 participants from Argentina, Brazil, Canada, Chile, China, Egypt, Hungary, India, Malaysia, Pakistan, Portugal, Turkey, United Kingdom and the United States of America (2). Research coordinated meetings were held in Rio de Janeiro, Brazil (5-9 November 2001), Belfast, UK (14-18 April 2003) and Islamabad, Pakistan (25-29 July 2005). This publication presents the research results presented in the final research coordination meeting, where the work completed during the last five years (2001-2005) was analysed

  2. Hypnosis and Mindfulness: The Twain Finally Meet.

    Science.gov (United States)

    Otani, Akira

    2016-04-01

    Mindfulness meditation (or simply mindfulness) is an ancient method of attention training. Arguably, developed originally by the Buddha, it has been practiced by Buddhists over 2,500 years as part of their spiritual training. The popularity in mindfulness has soared recently following its adaptation as Mindfulness-Based Stress Management by Jon Kabat-Zinn (1995). Mindfulness is often compared to hypnosis but not all assertions are accurate. This article, as a primer, delineates similarities and dissimilarities between mindfulness and hypnosis in terms of 12 specific facets, including putative neuroscientific findings. It also provides a case example that illustrates clinical integration of the two methods.

  3. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    Directory of Open Access Journals (Sweden)

    Georgia Kate Chapman

    2015-04-01

    Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.

  4. CSR-communication in the Business Press

    DEFF Research Database (Denmark)

    Morsing, Mette; Langer, Roy

    on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....

  5. Author Meets Readers

    OpenAIRE

    Dan Flory; Leah Kalmanson; Peter K.J. Park; Mark Larrimore; Sonia Sikka

    2017-01-01

    The exchange between Peter Park, Dan Flory and Leah Kalmanson on Park’s book Africa, Asia and the History of Philosophy: Racism in the Formation of the Philosophical Canon (Albany: SUNY Press, 2013) took place during the APA’s 2016 Central Division meeting (Chicago, Illinios) on a panel sponsored by the Committee on Asian and Asian-American Philosophers and Philosophies. After having peer-reviewed the exchange, JWP invited Sonia Sikka and Mark Larrimore to engage with these papers. All the fi...

  6. Author Meets Readers

    Directory of Open Access Journals (Sweden)

    Dan Flory

    2017-12-01

    Full Text Available The exchange between Peter Park, Dan Flory and Leah Kalmanson on Park’s book Africa, Asia and the History of Philosophy: Racism in the Formation of the Philosophical Canon (Albany: SUNY Press, 2013 took place during the APA’s 2016 Central Division meeting (Chicago, Illinios on a panel sponsored by the Committee on Asian and Asian-American Philosophers and Philosophies. After having peer-reviewed the exchange, JWP invited Sonia Sikka and Mark Larrimore to engage with these papers. All the five papers are being published together in this issue.

  7. 17 CFR 230.135e - Offshore press conferences, meetings with issuer representatives conducted offshore, and press...

    Science.gov (United States)

    2010-04-01

    ... proposed offering in the United States, include a statement regarding this intention; and (3) Not include any purchase order, or coupon that could be returned indicating interest in the offering, as part of...

  8. Undistorted, crack-free and low-cost ceramic components for the transportation, power and medical sector - numerical simulation of pressing and sintering. Final report; Formgenaue, rissfreie und kostenguenstige Bauteile aus Keramik fuer die Verkehrs-, Energie- und Medizintechnik - Numerische Simulation des Pressens und Sinterns. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stingl, P.; Wittig, F.

    1999-02-01

    One of the economically most important production routes for ceramic parts is die pressing and sintering. Up to now the development cycle is mainly based on empirical experience and sample production. Success or failure can be often determined only after sintering. This procedure is time and cost-intensive and sometimes could lead to the conclusion that a part is not producible at all considering economical restrictions. Finite element simulations in combination with appropriate material laws for pressing and sintering allow qualitative and quantitative predictions of undesirable distortions. Agreement with experimental data of real parts is very good. Using these simulations, the development time of a new part can be significantly reduced by optimizing die geometries, punch movements or temperature-time-curves during sintering. Thus, an effective method to improve the quality is available. (orig.) [German] Das Konstruieren und Einrichten von Werkzeugen wurde bisher hauptsaechlich ueber Musterproduktionen sowie ueber empirische Erfahrungswerte abgestimmt. Erfolg oder Misserfolg konnte oft erst nach dem Sintern beurteilt werden. Dieses Vorgehen ist zeit- und kostenintensiv und fuehrt manchmal nach langen und zeitintensiven Versuchsreihen zu dem Ergebnis, dass ein Bauteil ueber Trockenpresstechnik nicht oder nur mit unzureichender Prozesssicherheit hergestellt werden kann. Mit der numerischen Simulation des Pressens und Sinterns ist es moeglich, die Gruendichteunterschiede und damit auch den Sinterverzug beim Pressen rein rechnerisch zu ermitteln. Die Uebereinstimmung der Simulationsergebnisse mit dem realen Bauteil ist sehr gut. Damit koennen die Realisierbarkeit komplizierter Bauteile bereits am Rechner ueberprueft und Korrekturmassnahmen vorgeschlagen werden. Eine effektive Methode zur Qualitaetsverbesserung ist damit gegeben. (orig.)

  9. Internet Marketing with WordPress

    CERN Document Server

    Mercer, David

    2011-01-01

    The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se

  10. WordPress 24-hour trainer

    CERN Document Server

    Plumley, George

    2015-01-01

    Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

  11. Barrels XXX meeting report: Barrels in Baltimore.

    Science.gov (United States)

    Shin, Hyeyoung; Bitzidou, Malamati; Palaguachi, Fernando; Brumberg, Joshua C

    2018-03-01

    The Barrels meeting annually brings together researchers focused on the rodent whisker to cortical barrel system prior to the Society for Neuroscience meeting. The 2017 meeting focused on the classification of cortical interneurons, the role interneurons have in shaping brain dynamics, and finally on the circuitry underlying oral sensations. The meeting highlighted the latest advancements in this rapidly advancing field.

  12. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    Science.gov (United States)

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  13. Bullying the media : Cultural and climato-economic readings of press repression versus press freedom

    NARCIS (Netherlands)

    Van de Vliert, E.

    Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A

  14. Press conference bring excitement of geophysical research to the public

    Science.gov (United States)

    Leifert, Harvey

    “A Flare to Remember.” “Starbucks for Starfish.” “Earth's Rotation Slows for El Niño.” What do these catchy headlines have in common? They all resulted from presentations at AGU's Spring Meeting in Boston, Mass. Yes, geophysical science can be big news when presented in a way that is interesting to general audiences.Proof? Well, the “Flare to Remember” headline (in the Dallas Morning News) reported the discovery, via the SOHO spacecraft, that a solar flare had produced, deep inside the Sun, seismic disturbances of a magnitude never experienced on Earth. Researchers Valentina Zharkova of Glasgow University and Alexander Kosovichev of Stanford gave media representatives a preview of their session, supported by visual aids, in the AGU press briefing room.

  15. Press briefing on results from the solar spacecraft SOHO

    Science.gov (United States)

    1998-04-01

    After its launch on 2 December 1995, SOHO travelled to take up a special orbit 1.5 million kilometres away on the sunward side of the Earth, where the Sun never sets. The full scientific programme began in April 1996. The occasion for the briefing is the celebration of that second anniversary and of the mission's extension to 2003. Organized by the European Space Agency, the briefing will be hosted by the Rutherford Appleton Laboratory, which is near Oxford. Leading scientists associated with SOHO will announce to the press some remarkable new discoveries about the Sun's interior, atmosphere and solar wind. They will also briefly review the main achievements of the past two years. The role of SOHO as the chief watchdog for storms on the Sun that may affect the Earth will be demonstrated. Europe's creation of the finest spacecraft ever built to observe the Sun will be recalled by a top engineer from ESA. A speaker from NASA will explain transatlantic contributions to SOHO, which is a project of international cooperation between ESA and NASA. ESA's director of science will also be present, to relate SOHO to ESA's general science programme. A lunch-time talk by the BNSC's director of science completes the line-up of speakers. This is also an exceptional opportunity for the press to meet and interview scientists from all over Europe and the USA, who are attending a meeting at the Rutherford Appleton Laboratory of SOHO's Science Working Team (SWT). Journalists are usually excluded from such meetings. The Rutherford Appleton Laboratory plays a prominent part in SOHO, particularly through its provision of the CDS ultraviolet spectrometer. A visit to the CDS group will provide a chance to see what space research is really like. Please indicate your intention to attend, on the accreditation form that follows the schedule. Guidance on how to get to the Rutherford Appleton Laboratory is appended. PROGRAMME Rutherford Appleton Laboratory (RAL), 28 April 1998 10:30 Assembly of

  16. Kennedy Space Center Press Site (SWMU 074) Interim Measure Report

    Science.gov (United States)

    Applegate, Joseph L.

    2015-01-01

    This report summarizes the Interim Measure (IM) activities conducted at the Kennedy Space Center (KSC) Press Site ("the Press Site"). This facility has been designated as Solid Waste Management Unit 074 under KSC's Resource Conservation and Recovery Act Corrective Action program. The activities were completed as part of the Vehicle Assembly Building (VAB) Area Land Use Controls Implementation Plan (LUCIP) Elimination Project. The purpose of the VAB Area LUCIP Elimination Project was to delineate and remove soil affected with constituents of concern (COCs) that historically resulted in Land Use Controls (LUCs). The goal of the project was to eliminate the LUCs on soil. LUCs for groundwater were not addressed as part of the project and are not discussed in this report. This report is intended to meet the Florida Department of Environmental Protection (FDEP) Corrective Action Management Plan requirement as part of the KSC Hazardous and Solid Waste Amendments permit and the U.S. Environmental Protection Agency's (USEPA's) Toxic Substance Control Act (TSCA) self-implementing polychlorinated biphenyl (PCB) cleanup requirements of 40 Code of Federal Regulations (CFR) 761.61(a).

  17. 28 CFR 540.64 - Press pools.

    Science.gov (United States)

    2010-07-01

    ... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...

  18. Law of the Student Press. Second Edition.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings…

  19. Press kit kicks off new branding.

    Science.gov (United States)

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  20. The Moral Universes of Libertarian Press Theory.

    Science.gov (United States)

    Wuliger, Gregory T.

    1991-01-01

    Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…

  1. Investigation of pressing of molybdenum powder compacts

    International Nuclear Information System (INIS)

    Mymrin, S.A.; Kuznetsov, V.Eh.; Yampol'skij, M.L.; Leonov, S.A.; Mikhridinov, R.M.; Korzukhin, V.A.

    1990-01-01

    Results of an experimental investigation into pressing of compacts of MCh type molybdenum powders using the industrial equipment are presented. To measure the density of powder molybdenum billets a radioisotopic density meter with cesium-137 is used as radioactive gamma radiation source. The dependence of the produced billet density on the specific compacting pressure at different values of the powder bulk density is ascertained

  2. Eye-Pressing by Visually Impaired Children.

    Science.gov (United States)

    Jan, James E.; And Others

    1983-01-01

    The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

  3. Spontaneous pneumomediastinum after bench press training.

    Science.gov (United States)

    Nishino, Tomoya

    2017-04-01

    Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

  4. A Journalist's Guide to the Free Press.

    Science.gov (United States)

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  5. Free Press in a Constitutional Democracy

    Science.gov (United States)

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  6. [Report from the Student Press Law Center.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…

  7. When International Press Rights "Are" the News

    Science.gov (United States)

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  8. Trial access to Cambridge University Press ebooks

    CERN Multimedia

    CERN Library

    2011-01-01

    From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.

  9. The art of leading meetings.

    Science.gov (United States)

    English, C B

    1987-05-01

    The ability to skillfully lead meetings can contribute to a manager's effectiveness. There are four types of meetings, each serving different needs and requiring different leadership. A manager must know when to hold meetings, what leadership style is appropriate, how and when to use participative management, and how to facilitate a consensus. Considerable planning must be done before a meeting is held. Various leadership and communication skills are required to effectively open, conduct, and close a meeting. Finally, the leader needs to know how to deal with participants who become problems.

  10. Vibration Control of a High-Speed Precision Servo Numerically Controlled Punching Press: Multidomain Simulation and Experiments

    Directory of Open Access Journals (Sweden)

    Teng Xu

    2017-01-01

    Full Text Available A three-degree-of-freedom mathematical vibration model of a high-speed punching press was developed in order to explore the vibration modes of the punching press. A multidomain model of the punching press was established to predict the kinematic state during different conditions, as well as the effects of load fluctuation on the motor speed. Experimental measurements of the acceleration of the punching press were carried out. The results comparison reveals that the multidomain model is consistent with the vibration model and the experimental measurements. Modal analysis and structure modification of the punching press were conducted. The foundation at the base of the punching press was improved against excess of vibration. The effects of the dimensions of the foundation on the vibration were discussed with the aid of the multidomain model. Finally, proper foundation design, able to reduce the vibration, was obtained.

  11. Graphic Arts: Book Three. The Press and Related Processes.

    Science.gov (United States)

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  12. Meeting Disorders.

    Science.gov (United States)

    Yager, Joel; Katzman, Jeffrey W

    2017-12-01

    Although meetings are central to organizational work, considerable time devoted to meetings in Academic Health Centers appears to be unproductively spent. The primary purposes of this article are to delineate and describe Meeting Disorders, pathological processes resulting in these inefficient and ineffective scenarios, and Meeting Fatigue Disorder (MFD), a clinical syndrome. The paper also offers preliminary approaches to remedies. The authors integrate observations made during tens of thousands of hours in administrative meetings in academic medical settings with information in the literature regarding the nature, causes and potential interventions for dysfunctional groups and meetings. Meeting Disorders, resulting from distinct pathologies of leadership and organization, constitute prevalent subgroups of the bureaucrapathologies, pathological conditions caused by dysfunctional bureaucratic processes that generate excesses of wasted time, effort, and other resources. These disorders also generate frustration and demoralization among participants, contributing to professional burnout. Meeting Fatigue Disorder (MFD) is a subjective condition that develops in individuals who overdose on these experiences and may reflect one manifestation of burnout. Meeting disorders and Meeting Fatigue Disorder occur commonly in bureaucratic life. Resources and potential remedies are available to help ameliorate their more deleterious effects.

  13. Bench press exercise: the key points.

    Science.gov (United States)

    Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

    2015-06-01

    The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

  14. Method for hot pressing beryllium oxide articles

    Science.gov (United States)

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  15. Freedom of the Press – two concepts

    Directory of Open Access Journals (Sweden)

    Markus Meckl

    2015-03-01

    Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.

  16. Analysis of Institutional Press Releases and its Visibility in the Press

    Directory of Open Access Journals (Sweden)

    José Antonio Alcoceba-Hernando, Ph.D.

    2010-01-01

    Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news

  17. ACTIVATED HOT PRESSING BEHAVIOR OF WC NANOPOWDERS

    Directory of Open Access Journals (Sweden)

    Edwin GEVORKYAN

    2010-06-01

    Full Text Available The questions of consolidation of nanopowders concerning hot compaction by pressing activated by electric current action are considered. Mechanisms of grain boundary creep-sliding which are sequentially prevalent in a forming of compacted structures under influence of temperature factor and in the presence of a direct electric heating are discussed. Structural-transformational sources and conditions of forming of high physical-mechanical properties of nanopowder refractory solid-state products are described.

  18. The antimatter. Press breakfast 23 may 2000

    International Nuclear Information System (INIS)

    Spiro, M.; Dejardin, M.; Debu, P.; Aleksan, R.

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  19. Press conference of the 15 october 2002

    International Nuclear Information System (INIS)

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  20. Design of jigs, fixtures and press tools

    CERN Document Server

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  1. Natural cold pressed oils as cosmetic products

    Directory of Open Access Journals (Sweden)

    Małgorzata Ligęza

    2016-12-01

    Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.

  2. Forming of AHSS using Servo-Presses

    Science.gov (United States)

    Groseclose, Adam Richard

    Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

  3. Development of feed supplementation strategies for improving the productivity of dairy cattle on smallholder farms in Africa. Proceedings of the final research co-ordination meeting of a co-ordinated research project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture through co-ordinated research projects (CRP) supports studies aimed at improving livestock productivity in developing countries through the application of nuclear and related techniques. These studies have focused on animal nutrition, animal reproduction and more recently on animal nutrition/reproduction interactions with emphasis on smallholder farming systems. The primary aim of this CRP was to identify approaches for improving the productivity of dairy cattle maintained on smallholder farms in peri-urban areas. Central to the approach was to first obtain baseline information on productivity and reproductive efficiency and thereby identify nutritional and management constraints. Subsequently, corrective measures were developed and tested, keeping in mind the need for maximising the efficiency of current production systems and sustaining the nutrient supply through practical and economically feasible feed supplementation strategies developed using locally available feed resources. In addition the project envisaged contributing to enhancing the level of expertise within the national animal production research institutes in the region, to encourage close contact and interaction between scientists and institutions in Africa and to promote scientific information exchange on a regional basis. Through the project substantial progress was made in understanding the relationship between nutrient supply and productive and reproductive functions in dairy cattle on smallholder farming systems. Most of the participating countries were able to develop and test cost-effective feed supplementation strategies which improved both milk production and/or reproductive efficiency. The present publication contains the reports from participants of the project presented at the final Research Co-ordination Meeting held in Vienna from 7 to 11 September 1998 Refs, figs, tabs

  4. Use of nuclear and related techniques in studies of agroecological effects resulting from the use of persistent pesticides in Central America. Report of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1999-09-01

    The use of pesticides for the control of pests of agriculture and vectors of human and animal diseases in the countries of Central America is the highest per capita and one of the most intense in the world. There are reports of acute toxicity and chronic effects among farm workers. There are also reports that pesticide residues in food frequently exceed the Codex Alimentarius Commission's maximum residue levels (MRLs) and shipments of foodstuffs have been rejected by importing countries due to the presence of excessive residues of pesticides. Pesticides are also implicated in the contamination of continental and coastal waters. The indiscriminate use of pesticides would be expected to also aggravate pest problems by adversely affecting populations of beneficial arthropods and causing the development of resistance in pest populations. The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a co-ordinated research project in 1992 to generate information on residues of pesticides in the environment, their persistence under local conditions and effect on local species of beneficial arthropods in agricultural and adjacent areas in the countries of Central America. Such information could be used in the implementation of legislation to control the distribution and use of pesticides and the development and application of integrated pest management programmes. Scientists from Costa Rica, Guatemala, Honduras, Nicaragua, Panama and the United States of America participated in this project. This TECDOC reports on the accomplishments of the project and includes the papers presented at the final Research Co-ordination Meeting held in Panama City, Panama, 20-24 April 1998

  5. Development of feed supplementation strategies for improving the productivity of dairy cattle on smallholder farms in Africa. Proceedings of the final research co-ordination meeting of a co-ordinated research project

    International Nuclear Information System (INIS)

    1999-07-01

    The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture through co-ordinated research projects (CRP) supports studies aimed at improving livestock productivity in developing countries through the application of nuclear and related techniques. These studies have focused on animal nutrition, animal reproduction and more recently on animal nutrition/reproduction interactions with emphasis on smallholder farming systems. The primary aim of this CRP was to identify approaches for improving the productivity of dairy cattle maintained on smallholder farms in peri-urban areas. Central to the approach was to first obtain baseline information on productivity and reproductive efficiency and thereby identify nutritional and management constraints. Subsequently, corrective measures were developed and tested, keeping in mind the need for maximising the efficiency of current production systems and sustaining the nutrient supply through practical and economically feasible feed supplementation strategies developed using locally available feed resources. In addition the project envisaged contributing to enhancing the level of expertise within the national animal production research institutes in the region, to encourage close contact and interaction between scientists and institutions in Africa and to promote scientific information exchange on a regional basis. Through the project substantial progress was made in understanding the relationship between nutrient supply and productive and reproductive functions in dairy cattle on smallholder farming systems. Most of the participating countries were able to develop and test cost-effective feed supplementation strategies which improved both milk production and/or reproductive efficiency. The present publication contains the reports from participants of the project presented at the final Research Co-ordination Meeting held in Vienna from 7 to 11 September 1998

  6. STAFF MEETING

    CERN Document Server

    2003-01-01

    I should like to invite all members of the CERN Personnel to a meeting on Wednesday 25th June 2003 at 11.00 hrs - Auditorium, bldg. 500 to give a report on the outcome of the June Meetings of Council and its Committees. Closed-circuit transmission of the meeting will be available in the AB Auditorium (Prévessin), the AB Auditorium (Meyrin - bldg. 6), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). Luciano Maiani Director General

  7. Fifth technical meeting on quality

    International Nuclear Information System (INIS)

    Girard, A.

    1998-01-01

    This article reports on the 5th Technical Meeting on Quality which was held in San Diego on 20-22 October 1997 and which was attended by representatives of the Home and Joint Central Team and of manufacturers currently involved in the Large R and D projects. The meeting made progress towards the finalization of the ITER Quality Manual document for inclusion in the Final Design Report and the definition of the quality necessary for ITER procurement and construction

  8. LSA glass-ceramic tiles made by powder pressing

    International Nuclear Information System (INIS)

    Figueira, F.C.; Bertan, F.M.; Riella, H.G.; Uggioni, E.; Bernardin, A.M.

    2009-01-01

    A low cost alternative for the production of glass-ceramic materials is the pressing of the matrix glass powders and its consolidation simultaneously with crystallization in a single stage of sintering. The main objective of this work was to obtain LSA glass ceramics with low thermal expansion, processed by pressing and sintering a ceramic frit powder. The raw materials were homogenized and melted (1480 deg C, 80min), and the melt was poured in water. The glass was chemically (XRF and AAS) and thermally (DTA, 10 deg C/min, air) characterized, and then ground (60min and 120min). The ground powders were characterized (laser diffraction) and compressed (35MPa and 45MPa), thus forming four systems. The compacts were dried (150 deg C, 24h) and sintered (1175 deg C and 1185 deg C, 10 deg C/min). Finally, the glass-ceramics were characterized by microstructural analysis (SEM and XRD), mechanical behavior (σbending) and thermal analysis (α). The best results for thermal expansion were those for the glass-ceramics processed with smaller particle size and greater compaction pressure. (author)

  9. 78 FR 69543 - Record Requirements in the Mechanical Power Presses Standard

    Science.gov (United States)

    2013-11-20

    ... program). In such cases, OSHA would treat the weekly inspection as part of the periodic inspection.... OSHA-2013-0010] RIN 1218-AC80 Record Requirements in the Mechanical Power Presses Standard AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Direct final rule; request for comments...

  10. Areva - Press release from the Supervisory Board; Areva - Communique de presse du Conseil de Surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Marie, Patricia; Briand, Pauline; Floquet-Daubigeon, Fleur; Michaut, Maxime; Scorbiac, Marie de; Repaire, Philippine du

    2012-02-14

    During its meeting held on December 12, 2011, devoted in particular to the examination of the 2011 closing estimates, the AREVA Executive Board indicated that it expected to book a provision of 1.46 billion euros (2.025 billion US dollars) in the company's accounts for fiscal year 2011 for impairment of assets for the reporting entity UraMin, a mining company acquired by AREVA in 2007, which, given the provision booked in 2010 (426 million euros), brings the value of these assets on the AREVA balance sheet down to 410 million euros. Given the size of these provisions, the Supervisory Board decided to make three of its members, meeting as an ad hoc committee, in charge of analyzing the terms of acquisition of this company, as well as the key decisions made in this reporting entity up to 2011 and, based on the outcome of these analyses, to recommend to it any appropriate measures in AREVA's interest. This committee reported on its work during the Supervisory Board meeting held on February 14, 2012. In light of this report, the Supervisory Board found that the fairness and reliability of the financial statements of previous years were not in question. Nevertheless, considering the malfunctions raised, the Board considers it appropriate to thoroughly review AREVA's governance in order to ensure that decisions concerning large acquisitions or investments be reviewed and validated in the future under conditions ensuring better legal and financial security and enabling a more transparent dialogue between management and the Supervisory Board. It thus asked the Executive Board to recommend, at the next General Meeting of Shareholders, that the by-laws of the company be modified to make the Supervisory Board's prior approval of investments, stake acquisitions and acquisitions mandatory above a threshold of 20 million euros. It also decided to set up a business ethics committee within the Supervisory Board responsible for ensuring that rules of conduct are

  11. Logic Meeting

    CERN Document Server

    Tugué, Tosiyuki; Slaman, Theodore

    1989-01-01

    These proceedings include the papers presented at the logic meeting held at the Research Institute for Mathematical Sciences, Kyoto University, in the summer of 1987. The meeting mainly covered the current research in various areas of mathematical logic and its applications in Japan. Several lectures were also presented by logicians from other countries, who visited Japan in the summer of 1987.

  12. Tjekkoslovakisk presse år 2

    Directory of Open Access Journals (Sweden)

    Rudolf Prevratil

    1991-09-01

    Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.

  13. Press Freedom on the Media Agenda

    OpenAIRE

    Pires, Terezinha Maria de Carvalho Cruz

    2007-01-01

    This article proposes to present a refl ection on the meanings constructed by the Brazilian written press regarding media and democracy. For this, it was necessary to recompose a specifi c journalistic event: the submission to the Brazilian Congress of a bill to create the Federal Journalism Council by the Brazilian President, Luiz Inácio Lula da Silva, at the request of the National Journalists Federation in August, 2004. This procedure gave rise to something rarely seen: the media were in the...

  14. Pocketbook of the economic press 1994

    International Nuclear Information System (INIS)

    Kroll, J.M.

    1994-01-01

    The present 34th edition of this pocketbook gives an overview of German economic journalists with their specific branches, important specialist newspaper editorial boards, the economic editors of the daily-, weekly- and public press, radio and television broadcusting stations as well as news-, information- and teletext services. In addition, 1600 public relations offices of industrial businesses, industry and trade chambers and universities are given. It concludes with information on authorities at a national and county level and more than 1200 business groups and leading bodies. (BWI) [de

  15. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo

  16. Co-ordinated research project on isotopic evaluations in infant growth monitoring - a collaboration with WHO (partly RCA). Report on the second and final research co-ordination meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    through establishment of a standardised protocol. The participating countries in this CRP were Bangladesh, Brazil, Chile and Pakistan for the measurement of growth and breast-milk intake. These countries, currently undergoing nutritional transition, all have active programmes for the promotion of breast-feeding. Results of the studies from Brazil, Chile and Pakistan were discussed during this final Research Coordination Meeting (RCM). Technological aspects of the measurements, with a view to future applications, were also discussed.

  17. Co-ordinated research project on isotopic evaluations in infant growth monitoring - a collaboration with WHO (partly RCA). Report on the second and final research co-ordination meeting

    International Nuclear Information System (INIS)

    2004-01-01

    through establishment of a standardised protocol. The participating countries in this CRP were Bangladesh, Brazil, Chile and Pakistan for the measurement of growth and breast-milk intake. These countries, currently undergoing nutritional transition, all have active programmes for the promotion of breast-feeding. Results of the studies from Brazil, Chile and Pakistan were discussed during this final Research Coordination Meeting (RCM). Technological aspects of the measurements, with a view to future applications, were also discussed

  18. Pilot Research as Advocacy: The Case of Sayana Press in Kinshasa, Democratic Republic of the Congo

    Science.gov (United States)

    Binanga, Arsene; Bertrand, Jane T

    2016-01-01

    and qualitative studies to assess acceptability and feasibility, and (6) disseminating the findings to family planning stakeholders. Before the pilot, Sayana Press was relatively unknown in the DRC, and there was no precedent for medical and nursing students providing family planning methods or giving injections at the community level. In less than 12 months, the approach gained legitimacy and acceptance. The key Ministry of Health decision maker orchestrated the closing session of the dissemination meeting on next steps, paving the way for pilot tests of 3 new task-shifting approaches: insertion of Implanon NXT by medical and nursing students, self-injection for Sayana Press with supervision by students, and injection of Sayana Press by community health workers with no formal clinical training. PMID:27979874

  19. Pilot Research as Advocacy: The Case of Sayana Press in Kinshasa, Democratic Republic of the Congo.

    Science.gov (United States)

    Binanga, Arsene; Bertrand, Jane T

    2016-12-23

    qualitative studies to assess acceptability and feasibility, and (6) disseminating the findings to family planning stakeholders. Before the pilot, Sayana Press was relatively unknown in the DRC, and there was no precedent for medical and nursing students providing family planning methods or giving injections at the community level. In less than 12 months, the approach gained legitimacy and acceptance. The key Ministry of Health decision maker orchestrated the closing session of the dissemination meeting on next steps, paving the way for pilot tests of 3 new task-shifting approaches: insertion of Implanon NXT by medical and nursing students, self-injection for Sayana Press with supervision by students, and injection of Sayana Press by community health workers with no formal clinical training. © Binanga and Bertrand.

  20. Effective media communication of disasters: Pressing problems and recommendations

    Directory of Open Access Journals (Sweden)

    Ginter Peter M

    2007-06-01

    Full Text Available Abstract Background Public health officials and journalists play a crucial role in disseminating information regarding natural disasters, terrorism and other human-initiated disasters. However, research suggests that journalists are unprepared to cover terrorism and many types of natural disasters, in part because of lack sufficient expertise in science and medicine and training. The objective of this research was to identify solutions to problems facing journalists and public health public information officer (PIOs of communicating with the public during natural and human-initiated disasters. Methods To assist in identifying the most pressing problems regarding media response to health-related risks such as terrorism and large-scale natural disasters, 26 expert advisors were convened, including leaders representing journalists and public information officers, state health officials, experts in terrorism and emergency preparedness, and experts in health, risk, and science communication. The advisory group participated in pre-arranged interviews and were asked to identify and review bioterrorism educational resources provided to journalist. All advisory group members were then invited to attend a day long meeting January 29, 2004 to review the findings and reach consensus. Results The most pressing problems were found to be a lack of coordination between PIO's and journalists, lack of resources for appropriately evaluating information and disseminating it efficiently, and a difference in perception of PIO's and journalist towards each others role during emergency situations. The advisory board developed a list of 15 recommendations that may enhance communication plans betweens PIO's, journalist and the public. The solutions were meant to be feasible in terms of costs and practical in terms of the professional and organizational realities in which journalists and PIO's work. Conclusion It is clear that PIO's and journalists play crucial roles in

  1. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    International Nuclear Information System (INIS)

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive

  2. A CONCEPTUAL APPROACH ON PRESS CONFERENCE

    Directory of Open Access Journals (Sweden)

    Ioana Olariu

    2015-07-01

    Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.

  3. Press Conference: LHC Restart, Season 2

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where :   http://cern.ch/directions   at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...

  4. Energy metabolism during repeated sets of leg press exercise leading to failure or not

    DEFF Research Database (Denmark)

    Gorostiaga, Esteban M; Navarro-Amézqueta, Ion; Calbet, José A L

    2012-01-01

    This investigation examined the influence of the number of repetitions per set on power output and muscle metabolism during leg press exercise. Six trained men (age 34 ± 6 yr) randomly performed either 5 sets of 10 repetitions (10REP), or 10 sets of 5 repetitions (5REP) of bilateral leg press...... exercise, with the same initial load and rest intervals between sets. Muscle biopsies (vastus lateralis) were taken before the first set, and after the first and the final sets. Compared with 5REP, 10REP resulted in a markedly greater decrease (P...

  5. Extinction of Cocaine Seeking Requires a Window of Infralimbic Pyramidal Neuron Activity after Unreinforced Lever Presses.

    Science.gov (United States)

    Gutman, Andrea L; Nett, Kelle E; Cosme, Caitlin V; Worth, Wensday R; Gupta, Subhash C; Wemmie, John A; LaLumiere, Ryan T

    2017-06-21

    The infralimbic cortex (IL) mediates extinction learning and the active suppression of cocaine-seeking behavior. However, the precise temporal relationship among IL activity, lever pressing, and extinction learning is unclear. To address this issue, we used activity-guided optogenetics in male Sprague Dawley rats to silence IL pyramidal neurons optically for 20 s immediately after unreinforced lever presses during early extinction training after cocaine self-administration. Optical inhibition of the IL increased active lever pressing during shortened extinction sessions, but did not alter the retention of the extinction learning as assessed in ensuing extinction sessions with no optical inhibition. During subsequent cued reinstatement sessions, rats that had previously received optical inhibition during the extinction sessions showed increased cocaine-seeking behavior. These findings appeared to be specific to inhibition during the post-lever press period because IL inhibition given in a noncontingent, pseudorandom manner during extinction sessions did not produce the same effects. Illumination alone (i.e., with no opsin expression) and food-seeking control experiments also failed to produce the same effects. In another experiment, IL inhibition after lever presses during cued reinstatement sessions increased cocaine seeking during those sessions. Finally, inhibition of the prelimbic cortex immediately after unreinforced lever presses during shortened extinction sessions decreased lever pressing during these sessions, but had no effect on subsequent reinstatement. These results indicate that IL activity immediately after unreinforced lever presses is necessary for normal extinction of cocaine seeking, suggesting that critical encoding of the new contingencies between a lever press and a cocaine reward occurs during that period. SIGNIFICANCE STATEMENT The infralimbic cortex (IL) contributes to the extinction of cocaine-seeking behavior, but the precise relationship

  6. 78 FR 52768 - Sunshine Act Meeting

    Science.gov (United States)

    2013-08-26

    ... FEDERAL DEPOSIT INSURANCE CORPORATION Sunshine Act Meeting Pursuant to the provisions of the... Corporation's Board of Directors will meet in open session at 10:00 a.m. on Wednesday, August 28, 2013, to... Directors' Meetings. Memorandum and resolution re: Final Rule Regarding the Retention of Records of an...

  7. August Meeting

    African Journals Online (AJOL)

    chifaou.amzat

    2011-10-19

    Oct 19, 2011 ... rural hometowns, where they unite with their rural-based colleagues for ... extent have they empowered the women-folk in the public sphere? ...... It would be safe, therefore, for one to conceptualise the 'August Meeting'.

  8. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

    You were hundreds of persons to participate in our information meetings of October 3 and 6 2014, and we thank you for your participation! The full presentation is available here. A summary of the topics is available here (in french).

  9. The Student Newspaper; Report of the Special Commission on the Student Press to the President of the University of California.

    Science.gov (United States)

    American Council on Education, Washington, DC.

    The Commission on the Student Press was appointed by the President of the University of California to assess the nature, role and quality of student newspapers at the University of California's campuses and ascertain their degree of effectiveness in meeting student needs. The Commission also considered such issues as (1) how should the student…

  10. Public meetings

    CERN Multimedia

    Staff Association

    2017-01-01

    Do you have questions about the elections to the Staff Council, 2017 MERIT exercise, EVE and School, LD to IC exercise, CHIS, the Pension Fund… Come get informed and ask your questions at our public meetings. These public meetings are also an opportunity to get the more information on current issues. Benefit from this occasion to get the latest news and to discuss with the representatives of the statutory body that is the Staff Association!

  11. First wall and shield components manufacturing by hot isostatic pressing

    International Nuclear Information System (INIS)

    Lind, Anders; Tegman, R.

    1994-01-01

    At a meeting in Garching in June 1994 Hot Isostatic Pressing (HIP) was presented as a possible route to manufacture ITER first wall and shield components. The main advantages of the HIP concept include excellent and uniform mechanical properties of the produced materials and joints, high reliability and robustness of the HIP process, double containment of coolant, good flexibility concerning general design as well as size and location for inner cooling tubes, low cost and short delivery times, and a good near net shape capability for components in size up to 15 tons. To assess the applicability of HIP for the manufacturing of ITER first wall and shield components, it was agreed * to choose possible production parameters based in the present know-how, * to produce a compound mock-up in one shot from available solid steel/powder copper/steel tubes to demonstrate the joinability of the materials, * to examine the produced mock-up/materials by multi array ultrasonic testing, limited mechanical testing, metallography, scanning electron microscopy and energy dispersive spectroscopy, and * to compile data on Type 316L steels produced by HIP. Preliminary results and the mock-up were presented at a meeting in Garching in mid July 1994. This study clearly shows the excellent joinability of a copper alloy (Cu-0.5%Zr) and stainless steels (Type 304, 316 L) by HIP at temperatures close to the melting temperature of copper, with only limited influence on the microstructures, which makes it possible to HIP the first wall and shield structure in one step. Excellent mechanical properties of the compound are obtained with the copper alloy and not the joint being the weakest part. 7 refs, 21 figs, 1 tab

  12. Searching for a Free Press in Indian Country.

    Science.gov (United States)

    Benton, Sherrole

    1994-01-01

    Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)

  13. STS-114: Discovery Launch Readiness Press Conference

    Science.gov (United States)

    2005-01-01

    Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

  14. Meeting Mid-Year Meeting

    Indian Academy of Sciences (India)

    23 Newsletter of the Indian Academy of ScienCE. 57th Annual. Meeting ... Srinivas, Institute for Social and Economic. Change ... "Quantum mechanics and statistical mechanics of anyons" .... Special Issue on Geomagnetic Methods and.

  15. Simplex network modeling for press-molded ceramic bodies incorporated with granite waste

    International Nuclear Information System (INIS)

    Pedroti, L.G.; Vieira, C.M.F.; Alexandre, J.; Monteiro, S.N.; Xavier, G.C.

    2012-01-01

    Extrusion of a clay body is the most commonly applied process in the ceramic industries for manufacturing structural block. Nowadays, the assembly of such blocks through a fitting system that facilitates the final mounting is gaining attention owing to the saving in material and reducing in the cost of the building construction. In this work, the ideal composition of clay bodies incorporated with granite powder waste was investigated for the production of press-molded ceramic blocks. An experimental design was applied to determine the optimum properties and microstructures involving not only the precursors compositions but also the press and temperature conditions. Press load from 15 ton and temperatures from 850 to 1050°C were considered. The results indicated that varying mechanical strength of 2 MPa to 20 MPa and varying water absorption of 19% to 30%. (author)

  16. Radiophase development in hot-pressed alkoxide-derived titanate ceramics for nuclear waste stabilization

    International Nuclear Information System (INIS)

    Dickson, F.J.; Mitamura, H.; White, T.J.

    1989-01-01

    This paper reports phase development as a function of hot-pressing temperature studied in alkoxide-derived titanate-based ceramics doped with a 10 wt% loading of a sodium-rich (NAR) and a sodium-poor (NAP) simulated high-level waste. Pyrochlore was found to be the most abundant phase in both calcine powders. A pseudobrookite phase existed metastably at hot-pressing temperatures between 890 degrees and 920 degrees C. After hot-pressing at 1100 degrees C, the final phase assemblage for the NAP material consisted of zirconolite, hollandite-type, perovskite, alloy, and reduced rutile (Magneli phases). In addition, NAR samples contained hibonite, freudenbergite, and loveringite. Phase development was driven to completion over a very narrow temperature range (≤50 degrees C), beginning at 870 degrees and 850 degrees C for NAP and NAR, respectively, although full densification was not achieved below 1100 degrees C. Both waste forms exhibited comparable microstructure and aqueous durability

  17. Pressing charges and criminal prosecution in sex crimes (Buenos Aires, 1863-1921

    Directory of Open Access Journals (Sweden)

    Betina Clara Riva

    2014-12-01

    Full Text Available This paper intends to call into question the judicial interpretation of “instancia privada” (who had the right to press charges as well as the debate about the prosecutors’ right to follow the case once someone had pressed charges on a sex crime. I try to show how beyond its “mixed” character (the obligation to press charges to begin the case and public prosecution later on established by the codes and doctrine it was still a controversial issue in court. At the same time I intend to debate about the values at play when the judicial system had to deal with these crimes, as well as to question who were considered the actual victims of them. Finally I attempt to explore briefly some links between right and gender/sexuality.

  18. Expanded Analysis of Hot Isostatic Pressed Iodine-Loaded Silver-Exchanged Mordenite

    Energy Technology Data Exchange (ETDEWEB)

    Jubin, R. T. [ORNL; Bruffey, S. H. [ORNL; Patton, K. K. [ORNL

    2014-09-30

    Reduced silver-exchanged mordenite (Ag0Z) is being evaluated as a potential material to control the release of radioactive iodine that is released during the reprocessing of used nuclear fuel into the plant off-gas streams. The purpose of this study was to determine if hot pressing could directly convert this iodine loaded sorbent into a waste form suitable for long-term disposition. The minimal pretreatment required for production of pressed pellets makes hot pressing a technically and economically desirable process. Initial scoping studies utilized hot uniaxial pressing (HUPing) to prepare samples of non-iodine-loaded reduced silver exchanged mordenite (Ag0Z). The resulting samples were very fragile due to the low pressure (~ 28 MPa) used. It was recommended that hot isostatic pressing (HIPing), performed at higher temperatures and pressures, be investigated. HIPing was carried out in two phases, with a third and final phase currently underway. Phase I evaluated the effects of pressure and temperature conditions on the manufacture of a pressed sample. The base material was an engineered form of silver zeolite. Six samples of Ag0Z and two samples of I-Ag0Z were pressed. It was found that HIPing produced a pressed pellet of high density. Analysis of each pressed pellet by scanning electron microscopy-energy dispersive spectrophotometry (SEM-EDS) and X-ray diffraction (XRD) demonstrated that under the conditions used for pressing, the majority of the material transforms into an amorphous structure. The only crystalline phase observed in the pressed Ag0Z material was SiO2. For the samples loaded with iodine (I-Ag0Z) iodine was present as AgI clusters at low temperatures, and transformed into AgIO4 at high temperatures. Surface mapping and EDS demonstrate segregation between silver iodide phases and silicon dioxide phases. Based on the results of the Phase I study, an expanded test matrix was developed to examine the effects of multiple source materials, compositional

  19. Properties of hot pressed MgB2/Ti tapes

    International Nuclear Information System (INIS)

    Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

    2009-01-01

    Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

  20. Public meeting

    CERN Multimedia

    HR Department

    2010-01-01

    Dear Colleagues, I am pleased to invite you to a public meeting which will be held on Thursday 11 November 2010 at 2:30 p.m., in the Main Auditorium (welcome coffee from 2 p.m.) In this meeting Sigurd Lettow, Director for Administration and General Infrastructure will present the Management’s proposals towards restoring full funding of the Pension Fund. The meeting will follow discussions which took place with the Staff Association, at the Standing Concertation Committee (CCP) of 1 November 2010 and will be held with the Members States, at the Tripartite Employment Conditions Forum (TREF) of 4 November 2010. You will be able to attend this presentation in the Main Auditorium or via the webcast. The Management will also be available to reply to your questions on this subject. Best regards, Anne-Sylvie Catherin

  1. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2010 at 9:15 a.m. in room 60-6-002 Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department The CERN Ombuds The new account management system Crèche progress + Restaurants Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch   Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  2. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2011 At 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN The new account management system Users’ Office news Any Other Business Agenda for the next meeting   Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium ...

  3. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2010 at 9:15 a.m. in Room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS Department An update on Safety at CERN The CERN Summer Student program Bringing Library services to users Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): ...

  4. ACCU Meeting

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department CERN Global Network An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairperson in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) ...

  5. Final draft consultants report. Consultants' meeting on requirements for reference materials and intercomparison runs - IAEA programme on Analytical Quality Control Services (AQCS), 17-21 April 1994, Kona, HI, USA

    International Nuclear Information System (INIS)

    2002-01-01

    The purpose of the meeting was to define the aims of the Agency's Analytical Quality Control Services (AQCS) programme in view of its uniqueness as an international programme and to establish objectives for the organization of intercomparison runs and production of reference materials and the Agency's services to Member States in future years. This draft report contains the meeting agenda and recommendations made by the consultants. The recommendations are grouped as follows: Mission Statement; Laboratory Qualification; Training and Development; Resources and Technical Concepts; Standing Group of Experts

  6. Staff meeting

    CERN Document Server

    2006-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Thursday 18 January 2007 at 3:00 p.m. Main Auditorium (bldg.. 500) to convey my best wishes for the new year, to review CERN's activities during 2006 and to present the perspectives for this special year of the LHC start-up. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg.. 31) and the AT Auditorium (bldg.. 30). Simultaneous translation into English will be available in the main Auditorium. Robert AYMAR

  7. Scientific meetings

    International Nuclear Information System (INIS)

    1973-01-01

    One of the main aims of the IAEA is to foster the exchange of scientific and technical information and one of the main ways of doing this is to convene international scientific meetings. They range from large international conferences bringing together several hundred scientists, smaller symposia attended by an average of 150 to 250 participants and seminars designed to instruct rather than inform, to smaller panels and study groups of 10 to 30 experts brought together to advise on a particular programme or to develop a set of regulations. The topics of these meetings cover every part of the Agency's activities and form a backbone of many of its programmes. (author)

  8. STAFF MEETING

    CERN Multimedia

    Robert Aymar

    2005-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Thursday 12 January 2006 at 4:00 p.m. - Main Auditorium (bldg. 500) to convey my best wishes for the new year, to review CERN's activities during 2005 and to present the perspectives for this coming year. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). A simultaneous translation into English will be available in the main Auditorium. Best wishes for the festive season Robert AYMAR

  9. STAFF MEETING

    CERN Multimedia

    2004-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Tuesday 13 January 2004 at 4:00 p.m. - Main Auditorium (bldg. 500) to convey my best wishes for the new year and to present a perspective of CERN's future activities. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). A simultaneous translation into English will be available in the main Auditorium. Robert AYMAR

  10. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

      Public meetings : Come and talk about your future employment conditions !   The Staff Association will come and present the results of our survey on the 2015 five-yearly review. Following the survey, the topics discussed, will be contract policy, recognition of merit (MARS), working time arrangements and family policy. After each meeting and around a cup of coffee or tea you will be able to continue the discussions. Do not hesitate to join us, the five-yearly review, it is with YOU!

  11. Crisis meeting

    CERN Multimedia

    Staff Association

    2014-01-01

      To all CERN staff: your rights are at risk ! We invite you to come to a crisis meeting on Wednesday 2nd April at 10:30 a.m., Auditorium, Main Building, Meyrin site. Your presence is crucial, we are ALL concerned !

  12. Crisis meeting

    CERN Multimedia

    Staff Association

    2015-01-01

    To all CERN staff: your rights are at risk! We invite you to come to a crisis meeting on Thursday 7th May 2015 at 9 a.m., Auditorium, Main Building, Meyrin site. Your presence is crucial, we are ALL concerned!

  13. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 4 December 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Fellows, Associates and Summer Student Programmes Particle Data Book distribution Revoking Computer accounts Equipment insurance on site Reports from ACCU representatives on other committees Users' Office news Any Other Business Dates for meetings in 2003 Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (74837...

  14. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria  W. Adam  (71661) Belgium  G. Wilquet  (74664) Bulgaria  R. Tzenov  (77958) Czech Republic  P. Závada&am...

  15. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2001 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 2. Adoption of the agenda 3. Minutes of the previous meeting 4. Matters arising 5. News from the CERN Management 6. Housing 7. Restaurant Surveillance Committee 8. Users' Office news 9. Election of ACCU chairman 10. Any Other Business 11. Dates for meetings in 2002 12. Agenda for the next meetingAnyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) Fr...

  16. ACCU MEETING

    CERN Multimedia

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) :   Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958)...

  17. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2000-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2000 At 10 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Equal Opportunities at CERN The Summer Student programme CERN Programme for Physics High School Teachers Users' Office News Any Other Business Dates for Meetings in 2001 Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets) : Austria G. Neuhofer (74094) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Re...

  18. ACCU Meeting

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 15 June 2011 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department Update on Safety at CERN Reports from ACCU representatives on other Committees a. Scientific Information Policy Board (SIPB) b. IT Service Review Meeting (ITSRM) c. GS User Commission Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in bra...

  19. Treatment of the press residues of pressed grapes on an industrial scale

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-24

    EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.

  20. Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  1. [Work disability in public press professions].

    Science.gov (United States)

    Akermann, S

    2002-09-01

    In this study more than 1,000 cases of long-term disability among members of the press and media were evaluated. Mental disorders were the main cause of disability in almost every fourth case. In women psychiatric illnesses were even more important. The most common diagnosis was that of a depressive disorder which accounted for more than half of all psychiatric cases. The causes of disability of other insurance systems such as the German social security scheme and the pension and disability plan for the medical profession were compared. Mental illnesses are the leading cause of disability in white collar workers and orthopaedic illnesses, especially disorders of the vertebral column, are the leading cause in blue collar workers, as one might have expected. In females mental disorders are even more common than in men whereas men tend to have more cardiovascular problems than women. In this study also some interesting features regarding disability caused by various illnesses after long-term follow-up were found. This opens unknown perspectives allowing new assessment of diseases and eventually will enable the actuary to price medical diagnoses for disability insurance.

  2. Pressing problems of measurement of ionizing radiations

    International Nuclear Information System (INIS)

    Fominykh, V.I.; Yudin, M.F.

    1993-01-01

    The current system for ensuring the unity of measurements in the Russian Federation and countries of the former Soviet Union ensures a high quality of dosimetric, radiometric, and spectrometric measurements in accordance with the recommendations of the Consulative Committee on Standards for Measurements of Ionizing Radiations of the International Bureau of Weights and Measures (IBWM), International Organization on Radiological Units (ICRU), International Commission on Radiological Protection (ICRP), International Organization on Legislative Metrology (IOLM), International Atomic Energy Agency (IAEA), World Health Organization (WHO), etc. Frequent collation of the national primary and secondary standards of Russia with those of IBWM and the leading national laboratories of the world facilitate mutual verification of the measurements of ionizing radiations. The scope of scientific and scientific-technical problems that can be solved by using ionizing radiations has expanded significantly in recent years. In this paper the authors consider some pressing problems of the metrology of ionizing radiations which have arisen as a result of this expansion. These include the need for unity and reliability of measurements involved in radiation protection, the measurement of low doses involving low dose rates, ensuring the unity of measurements when monitoring the radiological security of the population, the need for more uniformity on an international scale regarding the basic physical quantities and their units for characterizing radiation fields, determination of the accuracy of measurement of the radiation dose absorbed by an irradiated tissue or organ, and the development of complex standards for ionizing radiations. 5 refs., 1 tab

  3. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee; Terrance Conners

    2007-09-07

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal

  4. Distal clavicular osteolysis in adults: association with bench pressing intensity

    International Nuclear Information System (INIS)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

    2016-01-01

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  5. ITER technical advisory committee meeting

    International Nuclear Information System (INIS)

    Fujiwara, M.

    2001-01-01

    The 17th Meeting of the ITER Technical Advisory Committee (TAC-17) was held on February 19-22, the ITER Garching Work Site in Germany. The objective of the meeting was to review the Draft Final Design Report of ITER-FEAT and assess the ability of the self-consistent overall design both to satisfy the technical objectives previously defined and to meet the cost limitations. TAC-17 was also organized to confirm that the design and critical elements, with emphasis on the key recommendations made at previous TAC meetings, are such as to extend the confidence in starting ITER construction. It was also intended to provide the ITER Council, scheduled to meet on 27 and 28 February in Toronto, with a technical assessment and key recommendations of the above mentioned report

  6. Numerical simulation of hot-pressed veneer products: Forming - Spring back – Distortion

    DEFF Research Database (Denmark)

    Ormarsson, Sigurdur; Sandberg, Dick

    2007-01-01

    Customers demand very high quality of veneered furniture products with regard to surface appearance, shape stability and stiffness. To meet these requirements, it is important to improve the manufacturing process by a better understanding of the thermo-hygro-mechanical behaviour of the individual...... veneers. During the manufacture of strongly curved products, the veneers are exposed to large membrane and bending deformations and to high pressure in the radial fibre direction. When hot-press forming is used, the veneers are also exposed to a high surface temperature during the pressing time (curing...... time). These severe conditions can result in plastic deformation perpendicular to the veneer surface as well as mechano-sorptive strains in the curved regions, since the heating can have a significant influence on the moisture distribution. How strong an influence these factors have on the distortion...

  7. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

    2015-01-12

    This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

  8. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    DeTar, Carleton [P.I.

    2012-12-10

    This document constitutes the Final Report for award DE-FC02-06ER41446 as required by the Office of Science. It summarizes accomplishments and provides copies of scientific publications with significant contribution from this award.

  9. Zinc coated sheet steel for press hardening

    Science.gov (United States)

    Ghanbari, Zahra N.

    Galvanized steels are of interest to enhance corrosion resistance of press-hardened steels, but concerns related to liquid metal embrittlement have been raised. The objective of this study was to assess the soak time and temperature conditions relevant to the hot-stamping process during which Zn penetration did or did not occur in galvanized 22MnB5 press-hardening steel. A GleebleRTM 3500 was used to heat treat samples using hold times and temperatures similar to those used in industrial hot-stamping. Deformation at both elevated temperature and room temperature were conducted to assess the coating and substrate behavior related to forming (at high temperature) and service (at room temperature). The extent of alloying between the coating and substrate was assessed on undeformed samples heat treated under similar conditions to the deformed samples. The coating transitioned from an α + Gamma1 composition to an α (bcc Fe-Zn) phase with increased soak time. This transition likely corresponded to a decrease in availability of Zn-rich liquid in the coating during elevated temperature deformation. Penetration of Zn into the substrate sheet in the undeformed condition was not observed for any of the processing conditions examined. The number and depth of cracks in the coating and substrate steel was also measured in the hot-ductility samples. The number of cracks appeared to increase, while the depth of cracks appeared to decrease, with increasing soak time and increasing soak temperature. The crack depth appeared to be minimized in the sample soaked at the highest soak temperature (900 °C) for intermediate and extended soak times (300 s or 600 s). Zn penetration into the substrate steel was observed in the hot-ductility samples soaked at each hold temperature for the shortest soak time (10 s) before being deformed at elevated temperature. Reduction of area and elongation measurements showed that the coated sample soaked at the highest temperature and longest soak time

  10. Intercomparison of liquid metal fast reactor seismic analysis codes. V. 3: Comparison of observed effects with computer simulated effects on reactor cores from seismic disturbances. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1996-05-01

    This publication contains the final papers summarizing the validation of the codes on the basis of comparison of observed effects with computer simulated effects on reactor cores from seismic disturbances. Refs, figs tabs

  11. Hot pressing of B4C/SiC composites

    International Nuclear Information System (INIS)

    Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.

    2005-01-01

    B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)

  12. Auxiliary equipment and special techniques used for hot isostatic pressing

    International Nuclear Information System (INIS)

    Pfeffer, J.B.; Odebo, U.

    1977-01-01

    The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press

  13. High density high-TC ceramic superconductors by hot pressing

    International Nuclear Information System (INIS)

    Mak, S.; Chaklader, A.C.D.

    1989-01-01

    High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)

  14. Direct drive digital servo press with high parallel control

    Science.gov (United States)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  15. Muscle activation when performing the chest press and shoulder press on a stable bench vs. a Swiss ball.

    Science.gov (United States)

    Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond

    2010-04-01

    The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.

  16. Public meetings

    CERN Multimedia

    Staff Association

    2012-01-01

    MARS PENSIONS CONTRACT POLICY GENERAL INFORMATION   PUBLIC MEETINGS COME AND BE INFORMED! Public meetings Monday 15 Oct. 2 pm Amphi IT, 31-3-004 Meyrin Wednesday 17 Oct. 10 am Amphi BE, 864-1-D02 Prévessin Thursday 18 Oct. 10 am Salle du Conseil/ Council Chamber 503-1-001 Meyrin Thursday 18 Oct. 2 pm Filtration Plant, 222-R-001(in English) Meyrin   Overview of the topics to be discussed Recognition of Merit – MARS Outcome of last exercise 2007 to 2012 : lessons learned Pension Fund Capital preservation policy : what is it ? Contract policy LC2IC statistics SA proposal General information CVI 2013 Voluntary programmes (PRP, SLS)  

  17. Staff meeting

    CERN Multimedia

    2007-01-01

    I would like to invite all members of the CERN Personnel to a meeting on Wednesday 16 January 2008 at 3:00 p.m. Main Auditorium (bldg 500) to convey my best wishes for the new year, to review CERN’s activities during 2007 and to present the perspectives for 2008, the year of the LHC start-up. Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (Bldg. 31) and the AT Auditorium (Bldg. 30). Simultaneous translation into English will be available in the main Auditorium. Best wishes for the festive season! Robert AYMAR

  18. Meeting information

    Science.gov (United States)

    The 1986 Ocean Sciences Meeting of the American Geophysical Union and the American Society of Limnology and Oceanography (ASLO) will be held January 13-17, 1986, in New Orleans, La., at the Fairmont Hotel. Co-sponsoring societies are the Acoustical Society of America (ASA), the American Meteorological Society (AMS), the Marine Technology Society (MTS), and the Institute of Electrical and Electronics Engineers, Oceanic Engineering Society (OES).

  19. Legal Protection To The Infotainment Of Press Development In Indonesia

    Directory of Open Access Journals (Sweden)

    Anwar Fuadi

    2015-08-01

    Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.

  20. The small academic press in the land of giants

    Directory of Open Access Journals (Sweden)

    Frances Pinter

    2015-11-01

    Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing.  It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing.  'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.

  1. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa; Palmer, Kevin

    2011-01-01

    A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia

  2. ACCU Meeting

    CERN Multimedia

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 6. The PH Department 2. Adoption of the agenda 7. Reports from ACCU representatives on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. News from the CERN Management 9. Any Other Business 5. Matters arising 10. Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (79573) Portugal P. Bordalo (74704) Czech Republic P. Závada ...

  3. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting News from the CERN Management Matters arising The PH Department Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin...

  4. ACCU MEETING

    CERN Multimedia

    Chris Onions/EP (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising EP Space management Cars Housing EDH from the User's point of view VRVS Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskinen (79387) France M. Déj...

  5. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 8 March 2006 At 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  6. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tEmergency Services at CERN 2.\tAdoption of the agenda\t8.\tThe Meyrin Tram project 3.\tMinutes of the previous meeting9.\tReports from ACCU representatives on other committees 4.\tMatters arising10.\tUsers’ Office news 5.\tNews from the CERN Management11.\tElection of ACCU Chair 6. LHC 2008 start-up events 6.\tLogistics and transport at CERN 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Aust...

  7. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tAn update on safety at CERN 7.\tChildcare initiative 8.\tReports from ACCU representatives on other committees 9.\tUsers’ Office news 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75...

  8. ACCU meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 December 2007 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tLHC 2008 start-up events 7.\tEmergency Services at CERN 8.\tThe Meyrin Tram project 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tElection of ACCU Chair 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilq...

  9. ACCU MEETING

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark P. Hansen (75941...

  10. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2005 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer S. Laplace...

  11. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (7...

  12. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in room 60-6-002 1.     Chairman's remarks 2.     Adoption of the agenda 3.     Minutes of the previous meeting 4.     Matters arising 5.     News from the CERN Management 6.     Report on Fellows and Associates programme 7.     Overview of safety at CERN 8.     Reports from ACCU representatives on other committees 9.     Users' Office news 10.  Any Other Business 11.  Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets):Austria W. Adam  (71661) Belgium G. Wilquet (74664) Bulgaria ...

  13. ACCU Meeting

    CERN Document Server

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 December 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Closure of computer accounts upon CERN contract expiry Reports from ACCU representatives on other committees Users' Office news Election of ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets). Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) ...

  14. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 June 2005 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Logistics at CERN Open Access Publishing Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini ...

  15. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agendafor the meeting to be held on Wednesday 8 March 2006At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Proposal for a centralised access control service Report from PH Space Management Policy Board Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Fin...

  16. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2005-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 March 2005 At 9:15 a.m. in room 160-1-009 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Purchasing procedures at CERN Reports from ACCU representatives on other committees Users' Office news CERN Clubs Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Las...

  17. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks7.\tCar sharing pilot project 2.\tAdoption of the agenda\t8.\tReports from ACCU representatives on other committees 3.\tMinutes of the previous meeting9.\tUsers’ Office newss 4.\tMatters arising10.\tAny Other Business 5.\tNews from the CERN Management11.\tAgenda for the next meeting 6.\tLogistics and transport at CERN Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)...

  18. ACCU MEETING

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  19. ACCU MEETING

    CERN Document Server

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  20. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (7594...

  1. ACCU MEETING

    CERN Multimedia

    2006-01-01

    DRAFT Agenda of the meeting to be held on Wednesday 6 September 2006 at 9:15 a.m. in Room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on Fellows and Associates Programme Overview of safety at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under Item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K....

  2. ACCU meeting

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be heldon Wednesday 5 March 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN The CERN Ombudsperson proposal Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) BelgiumnC. Vander Velde (71539) Bulgaria Czech Republic P. Závada (75877) Denm...

  3. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 September 2008 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria, W. Adam (71661) Belgium, C. Vander Velde (71539) Bulgaria Czech Republic, P. Závada (75877) Denmark, J.B. Hansen (...

  4. ACCU MEETING

    CERN Document Server

    Chris Onions

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Dosimetry at CERN Status of collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office newss Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (7935...

  5. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. ...

  6. ACCU MEETING

    CERN Multimedia

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 13 June 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 6.\tDosimetry at CERN 2.\tAdoption of the agenda 7.\tStatus of collaborative tools at CERN 3.\tMinutes of the previous meeting 8.\tReports from ACCU representatives on other committees 4.\tMatters arising 9.\tUsers’ Office newss 5.\tNews from the CERN Management 10.\tAny Other Business 11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway G. Løvhøiden (73176) Belgium G. Wilquet (74664) Poland M. Witek (78967) Bulgaria Portugal...

  7. ACCU Meeting

    CERN Document Server

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 September 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management The Visits Service Lifetime of Computer Accounts Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Bauer (...

  8. ACCU Meeting

    CERN Multimedia

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 December 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Safety at CERN Car sharing pilot project CERN Public Web Sites and Intranet Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria   Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finl...

  9. ACCU Meeting

    CERN Multimedia

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2008 At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management An update on Safety at CERN Childcare initiative Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - W. Adam (71661) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (75877) Denmark - J.B. Hansen...

  10. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 8 December 2004 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting The effects of the reorganization of CERN's structure, one year on Matters arising News from the CERN Management Computer Security The new CERN Dosimeter Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finl...

  11. ACCU Meeting

    CERN Multimedia

    Chris Onions

    2004-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 June 2004 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Update on CERN's 50th anniversary celebrations Report from the EPOG (European Particle Physics Outreach Group) Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tsenov (79573) Czech Republic P. Závada (75877) Denmark P. Hansen (75941) Finlan...

  12. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 3 December 2008 at 9:15 a.m. in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. ...

  13. ACCU MEETING

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2007 at 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks6.\tLogistics and transport at CERN2.\tAdoption of the agenda\t7.\tCar sharing pilot project3.\tMinutes of the previous meeting8.\tReports from ACCU representatives on other committees4.\tMatters arising9.\tUsers’ Office newss5.\tNews from the CERN Management10.\tAny Other Business11.\tAgenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria\tW. Adam (71661)NorwayG. Løvhøiden (73176)Belgium\tG. Wilquet (74664)PolandM. Witek (78967)Bulgaria\tPortugalP...

  14. ACCU Meeting

    CERN Document Server

    2007-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2007 at 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car-sharing pilot project Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) Denmark J.B. Hansen (75941) Finland K. Lassila-Perini (79354) France F. Kunne S. La...

  15. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 June 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiis...

  16. ACCU MEETING

    CERN Multimedia

    Chris Onions (Secretary)

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 September 2001 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Logistics and Self-service stores EP Space management follow-up How to improve IT User Support? Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Roger.Jones@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland A. Kiiskin...

  17. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2001-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 March 2001 At 9:15 a.m. in the 6th floor Conference Room, Main Building Chairman's remarks Adoption of the agenda News from the CERN Management Minutes of the previous meeting Matters arising Video-conferencing/recording Fellows programme Operational Circular No. 6 EP Space management Update on Computing Issues Users' Office News Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Secretary in writing via the CERN Users' Office or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary)  ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic...

  18. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda,8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting9. Reports from ACCU representatives on other committees 4. Matters arising10. Users' Office news 5. News from the CERN Management11. Any Other Business 6. CHIS news and follow-up of survey12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661)NorwayH. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (7591...

  19. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 September 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Health Insurance Questionnaire Host States Relations Service Update on EP Space management Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (...

  20. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Ada...

  1. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 5 March 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Equipment insurance on site 2. Adoption of the agenda 8. ACCU reporting mechanisms in the different countries 3. Minutes of the previous meeting 9. Reports from ACCU representatives on other committees 4. Matters arising 10. Users' Office news 5. News from the CERN Management 11. Any Other Business 6. Health Insurance news and follow-up of survey 12. Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wil...

  2. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 11 June 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 7. Reports from ACCU representatives 2. Adoption of the agenda on other committees 3. Minutes of the previous meeting 8. Users' Office news 4. Matters arising 9. Any Other Business 5. News from the CERN Management 10. Agenda for the next meeting 6. Property Protection at CERN Anyone wishing to raise any points under item 9 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Norway H. Helstrup (73601) Belgium G. Wilquet (74664) Poland Z. Hajduk (75917) Bulgaria R. Tsenov (74837) Portugal P. Bordalo (74704) Czech Republic ...

  3. ACCU MEETING

    CERN Multimedia

    2003-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 December 2003 At 9:15 a.m. in room 60-6-002 1. Chairman's remarks 8. Report from IT division on Computing matters 2. Adoption of the agenda 9. Young Particle Physicists Association 3. Minutes of the previous meeting 10. Reports from ACCU representatives on other committees 4. Matters arising 11. Users' Office news 5. News from the CERN Management 12. Election of the ACCU Chair 6. Report from the new Director-General 13. Any Other Business 7. CERN's 50th anniversary 14. Agenda for the next meeting Anyone wishing to raise any points under item 13 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (716...

  4. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 6 March 2002 At 9:15 a.m. in the Council Chamber Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Follow-up on Space Management Users' Desktop needs PIE procedures Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer L. Serin (712...

  5. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha...

  6. ACCU MEETING

    CERN Multimedia

    Chris Onions

    2002-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 12 June 2002 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management PIE procedures CERN Cars EP Electronics Advisory Board Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch   ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria R. Tzenov (77958) Czech Republic P. Závada (75877) Denmark A. Waananen (75941) Finland E. Tuominen (71534) France F. Bauer (71247) L. Serin (71143) Germany H. Kroha ...

  7. ACCU MEETING

    CERN Multimedia

    PH Department

    2010-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 March 2010 At 9:15 a.m. in room 60-6-002 Chairperson’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Report on services from GS department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 10 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (Chairperson) (71539) Bulgaria Czech Republic S. Nemecek (71144) ...

  8. ACCU MEETING

    CERN Multimedia

    PH Department

    2011-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 7 September 2011 at 9:15 a.m. in room 60-6-002   Chairperson's remarks Adoption of the agenda      Minutes of the previous meeting Matters arising       News from the CERN Management Report on services from GS department Report on new CHIS rules Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 9 is invited to send them to the Chairperson in writing or by e-mail to Michael.Hauschild@cern.ch Michael Hauschild (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria M. Jeitler (76307) Belgium C. Vander Velde (Chairperson)...

  9. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of conduct 7.\tEqual Opportunities at CERN 8.\tAn update on safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tOther business 13.\tAgenda of the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives on ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Re...

  10. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 10 June 2009At 9:15 a.m. in room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management CERN Social Services User services in GS Department An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria - G. Walzel (76592) Belgium - C. Vander Velde (71539) Bulgaria Czech Republic - P. Závada (7587...

  11. ACCU Meeting

    CERN Multimedia

    Chris Onions

    DRAFT Agenda for the meeting to be held on Wednesday 9 December 2009 At 9:15 a.m. in Room 60-6-002 Chairman’s remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Restaurant No. 1 extension An update on Safety at CERN Reports from ACCU representatives on other committees Users’ Office news Election of the ACCU Chair Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Czech Republic P. Záv...

  12. ACCU MEETING

    CERN Multimedia

    PH Department

    2009-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 9 September 2009 At 9:15 a.m. in room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tCode of Conduct 7.\tEqual Opportunities at CERN 8.\tAn update on Safety at CERN 9.\tThe CERN shuttle service 10.\tReports from ACCU representatives on other committees 11.\tUsers’ Office news 12.\tAny Other Business 13.\tAgenda for the next meeting Anyone wishing to raise any points under item 12 is invited to send them to the Chairman in writing or by e-mail to mailto:Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria G. Walzel (76592) Belgium C. Vander Velde (71539) Bulgaria Cze...

  13. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users' Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (7...

  14. ACCU Meeting

    CERN Document Server

    Chris Onions

    2006-01-01

    DRAFT Agenda for the meeting to be held on Wednesday 14 June 2006 At 9:15 a.m. in room 60-6-002 Chairman's remarks Adoption of the agenda Minutes of the previous meeting Matters arising News from the CERN Management Car sharing pilot project The CERN Document Server : the portal to Open Access Videoconferencing and collaborative tools at CERN Reports from ACCU representatives on other committees Users'Office news Any Other Business Agenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium G. Wilquet (74664) Bulgaria Czech Republic P. Závada (75877) ...

  15. Report of the meeting

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    A summary is given of the meeting on the Impact of changing Conditions in the Oil Market on Energy Policies in the United Nations Economic and Social Commission for Western Asia (ESCWA) held in Jordan in 1989. The report contains information on the main objective of the meeting; the countries who attended; the opening speech; the keynote address; the election of officers; the adoption of the programme of work; the presentation and discussion of ESCWA documents on the fluctuations of oil prices and energy policies and the impact of changing conditions in the oil market on energy policies in the ESCWA region; the presentation and discussion of working papers prepared by experts from within and outside the region and representatives of regional and international organizations; general debate; and finally the conclusions and recommendations. (UK)

  16. Narrative Finality

    Directory of Open Access Journals (Sweden)

    Armine Kotin Mortimer

    1981-01-01

    Full Text Available The cloturai device of narration as salvation represents the lack of finality in three novels. In De Beauvoir's Tous les hommes sont mortels an immortal character turns his story to account, but the novel makes a mockery of the historical sense by which men define themselves. In the closing pages of Butor's La Modification , the hero plans to write a book to save himself. Through the thrice-considered portrayal of the Paris-Rome relationship, the ending shows the reader how to bring about closure, but this collective critique written by readers will always be a future book. Simon's La Bataille de Pharsale , the most radical attempt to destroy finality, is an infinite text. No new text can be written. This extreme of perversion guarantees bliss (jouissance . If the ending of De Beauvoir's novel transfers the burden of non-final world onto a new victim, Butor's non-finality lies in the deferral to a future writing, while Simon's writer is stuck in a writing loop, in which writing has become its own end and hence can have no end. The deconstructive and tragic form of contemporary novels proclaims the loss of belief in a finality inherent in the written text, to the profit of writing itself.

  17. Effects of pressing temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy

    International Nuclear Information System (INIS)

    Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.

    2003-01-01

    The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)

  18. Reaching the hip-hop generation: Final (symposium proceedings) report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The goal of this final (closing) report is to capture the flavor of the symposium held March 1 and 2, 1993 in New York City convened by Motivational Educational Entertainment, Inc. (MEE), a black-owned communications research, consulting, and video production company based in Philadelphia, Pennsylvania. The mission of MEE is to understand, reach, and positively affect inner-city youth. Traditional communication approaches from mainstream sources to at-risk youth often don`t account for the unique way youth communicate among themselves and how they relate to the media. This understanding, however, is crucial. To understand youth communication, the people who create and send both entertaining and educational messages to urban youth must be brought into the dialogue. The meeting in New York was intended to provide an important opportunity for senders to meet and evaluate the appropriateness and effectiveness of their messages. In addition, the MEE symposium provided a forum for the continuing public debate about what needs to be done to reach today`s urban teens. Included in this document is a description of symposium goals/objectives, symposium activities, the reaction to and analysis of the symposium, recommendations for future MEE courses of action, and an appendix containing copies of press articles.

  19. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Energy Technology Data Exchange (ETDEWEB)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

    2016-11-15

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  20. Press touch code: A finger press based screen size independent authentication scheme for smart devices

    Science.gov (United States)

    Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262

  1. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Science.gov (United States)

    Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  2. Densification of boron carbide at relatively low temperatures by hot pressing and hot isostatic pressing

    International Nuclear Information System (INIS)

    Telle, R.

    1988-01-01

    The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs

  3. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Directory of Open Access Journals (Sweden)

    M S A Noman Ranak

    Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  4. Final Report

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Nielsen, Peter V.

    This final report for the Hybrid Ventilation Centre at Aalborg University describes the activities and research achievement in the project period from August 2001 to August 2006. The report summarises the work performed and the results achieved with reference to articles and reports published...

  5. Staff meeting

    CERN Multimedia

    2007-01-01

    Dear Colleagues, 2007 is a very special year for CERN. I would like to review the status of our activities with you, and I invite you to a presentation on Wednesday 27 June 2007 at 3:00 p.m. Main Auditorium (bldg. 500) Closed-circuit transmission of the meeting will be available in the Council Chamber and in the AB Auditorium (Meyrin), the AB Auditorium (Prévessin), the IT Auditorium (bldg. 31) and the AT Auditorium (bldg. 30). Simultaneous translation into English will be available in the Main Auditorium. Robert AYMAR

  6. Public meetings

    CERN Multimedia

    Staff Association

    2014-01-01

      MARS 2015 FIVE YEARLY REVIEW CONTRACT POLICY PENSION FUND GENERAL INFORMATION   COME AND BE INFORMED! PUBLIC MEETINGS Friday 3rd October at 10 am Amphi BE, 864-1-D02 Prévessin Friday 3rd October at 2 pm Salle du Conseil / Council Chamber, 503-1-001 (in English) Meyrin Monday 6th October at 10 am Kjell Johnsen Auditorium, 30-7-018 Meyrin Monday 6th October at 2 pm Salle du Conseil / Council Chamber, 503-1-001 Meyrin  

  7. Atlas of hot isostatic beryllium powder pressing diagrams

    International Nuclear Information System (INIS)

    Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.

    1995-01-01

    Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs

  8. Simulation Model of Automated Peat Briquetting Press Drive

    Directory of Open Access Journals (Sweden)

    A. A. Marozka

    2012-01-01

    Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.

  9. Criticism of the Press: Its Social, Psychological and Political Origins.

    Science.gov (United States)

    Becker, Lee B.; And Others

    This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

  10. Design, manufacture and performance research of double acting hydraulic press

    OpenAIRE

    Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

    1990-01-01

    This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

  11. New Realities for Scholarly Presses in Trying Economic Times

    Science.gov (United States)

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  12. Simulation of press-forming for automobile part using ultra high tension steel

    Directory of Open Access Journals (Sweden)

    Tanabe I.

    2012-08-01

    Full Text Available In recent years, ultra high tension steel has gradually been used in the automobile industry. The development of press-forming technology is now essential by reason of its high productivity and high product quality. In this study, tensile tests were performed with a view to understanding the material properties. Press-forming tests were then carried out with regard to the behaviors of spring back and deep-drawability, and manufacturing a real product. The ultra high tension steel used in the experiments had a thickness of 1 mm and a tensile strength of 1000 MPa. Finally, simulations of spring back, deep-drawability and manufacturing a real product in ultra high tension steel were conducted and evaluated in order to calculate the optimum-press-forming conditions and the optimum shape of the die. FEM with non-linear and dynamic analysis using Euler-Lagrange’s element was used for the simulations. It is concluded from the results that (1 the simulations conformed to the results of the experiments (2 the simulations proved very effective for calculating the optimum press conditions and die shape.

  13. News from the Library: PressDisplay on mobile devices!

    CERN Multimedia

    CERN Library

    2013-01-01

    You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published.   Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.

  14. ACCU MEETING

    CERN Document Server

    PH Department

    2008-01-01

    DRAFT Agenda for the meetingto be held on Wednesday 3 December 2008 at 9:15 a.m.in Room 60-6-002 1.\tChairman’s remarks 2.\tAdoption of the agenda 3.\tMinutes of the previous meeting 4.\tMatters arising 5.\tNews from the CERN Management 6.\tReport from the new Director-General 7.\tReport on the Fellows and Associates programme 8.\tAn update on Safety at CERN 9.\tReports from ACCU representatives on other committees 10.\tUsers’ Office news 11.\tAny Other Business 12.\tAgenda for the next meeting Anyone wishing to raise any points under item 11 is invited to send them to the Chairman in writing or by e-mail to Christopher.Onions@cern.ch Chris Onions (Secretary) ACCU is the forum for discussion between the CERN Management and the representatives of CERN Users to review the practical means taken by CERN for the work of Users of the Laboratory. The User Representatives to ACCU are (CERN internal telephone numbers in brackets): Austria W. Adam (71661) Belgium C. Va...

  15. German atomic low meeting 2004

    International Nuclear Information System (INIS)

    Ossenbuehl, F.

    2005-01-01

    The conference report on the German atomic law meeting 2004 contains 14 contributions on the German atomic legislation within four parts: Damage precaution in the operational phase; Legal general requirements for the final disposal - considerations ''de lege lata'' and ''de lege ferenda''. Financing of the site searching by a statutory company (''Verbandsmodell''). Atomic supervision authority - federal executive administration or federal self administration?

  16. 75 FR 70206 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

    Science.gov (United States)

    2010-11-17

    ... DEPARTMENT OF COMMERCE International Trade Administration [C-560-824] Certain Coated Paper... paper suitable for high-quality print graphics using sheet-fed presses (certain coated paper) from... Department published its final determination in the countervailing duty investigation of certain coated paper...

  17. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-07

    This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.

  18. Meeting Venus

    Science.gov (United States)

    Sterken, Christiaan; Aspaas, Per Pippin

    2013-06-01

    On 2-3 June 2012, the University of Tromsoe hosted a conference about the cultural and scientific history of the transits of Venus. The conference took place in Tromsoe for two very specific reasons. First and foremost, the last transit of Venus of this century lent itself to be observed on the disc of the Midnight Sun in this part of Europe during the night of 5 to 6 June 2012. Second, several Venus transit expeditions in this region were central in the global enterprise of measuring the scale of the solar system in the eighteenth century. The site of the conference was the Nordnorsk Vitensenter (Science Centre of Northern Norway), which is located at the campus of the University of Tromsoe. After the conference, participants were invited to either stay in Tromsoe until the midnight of 5-6 June, or take part in a Venus transit voyage in Finnmark, during which the historical sites Vardoe, Hammerfest, and the North Cape were to be visited. The post-conference program culminated with the participants observing the transit of Venus in or near Tromsoe, Vardoe and even from a plane near Alta. These Proceedings contain a selection of the lectures delivered on 2-3 June 2012, and also a narrative description of the transit viewing from Tromsoe, Vardoe and Alta. The title of the book, Meeting Venus, refers the title of a play by the Hungarian film director, screenwriter and opera director Istvan Szabo (1938-). The autobiographical movie Meeting Venus (1991) directed by him is based on his experience directing Tannhauser at the Paris Opera in 1984. The movie brings the story of an imaginary international opera company that encounters a never ending series of difficulties and pitfalls that symbolise the challenges of any multicultural and international endeavour. As is evident from the many papers presented in this book, Meeting Venus not only contains the epic tales of the transits of the seventeenth, eighteenth and nineteenth centuries, it also covers the conference

  19. Recovery of Flavonoids from Orange Press Liquor by an Integrated Membrane Process

    Directory of Open Access Journals (Sweden)

    Alfredo Cassano

    2014-08-01

    Full Text Available Orange press liquor is a by-product generated by the citrus processing industry containing huge amounts of natural phenolic compounds with recognized antioxidant activity. In this work, an integrated membrane process for the recovery of flavonoids from orange press liquors was investigated on a laboratory scale. The liquor was previously clarified by ultrafiltration (UF in selected operating conditions by using hollow fiber polysulfone membranes. Then, the clarified liquor with a total soluble solids (TSS content of 10 g·100 g−1 was pre-concentrated by nanofiltration (NF up to 32 g TSS 100 g−1 by using a polyethersulfone spiral-wound membrane. A final concentration step, up to 47 g TSS 100 g−1, was performed by using an osmotic distillation (OD apparatus equipped with polypropylene hollow fiber membranes. Suspended solids were completely removed in the UF step producing a clarified liquor containing most part of the flavonoids of the original press liquor due to the low rejection of the UF membrane towards these compounds. Flavanones and anthocyanins were highly rejected by the NF membrane, producing a permeate stream with a TSS content of 4.5 g·100 g−1. An increasing of both the flavanones and anthocyanins concentration was observed in the NF retentate by increasing the volume reduction factor (VRF. The final concentration of flavonoids by OD produced a concentrated solution of interest for nutraceutical and pharmaceutical applications.

  20. Recovery of flavonoids from orange press liquor by an integrated membrane process.

    Science.gov (United States)

    Cassano, Alfredo; Conidi, Carmela; Ruby-Figueroa, René

    2014-08-11

    Orange press liquor is a by-product generated by the citrus processing industry containing huge amounts of natural phenolic compounds with recognized antioxidant activity. In this work, an integrated membrane process for the recovery of flavonoids from orange press liquors was investigated on a laboratory scale. The liquor was previously clarified by ultrafiltration (UF) in selected operating conditions by using hollow fiber polysulfone membranes. Then, the clarified liquor with a total soluble solids (TSS) content of 10 g·100 g-1 was pre-concentrated by nanofiltration (NF) up to 32 g TSS 100 g-1 by using a polyethersulfone spiral-wound membrane. A final concentration step, up to 47 g TSS 100 g-1, was performed by using an osmotic distillation (OD) apparatus equipped with polypropylene hollow fiber membranes. Suspended solids were completely removed in the UF step producing a clarified liquor containing most part of the flavonoids of the original press liquor due to the low rejection of the UF membrane towards these compounds. Flavanones and anthocyanins were highly rejected by the NF membrane, producing a permeate stream with a TSS content of 4.5 g·100 g-1. An increasing of both the flavanones and anthocyanins concentration was observed in the NF retentate by increasing the volume reduction factor (VRF). The final concentration of flavonoids by OD produced a concentrated solution of interest for nutraceutical and pharmaceutical applications.

  1. 75 FR 34740 - Sunshine Act Meeting

    Science.gov (United States)

    2010-06-18

    ... resolution re: Final Rule: Temporary Liquidity Guarantee Program. Memorandum re: Deposit Insurance Fund Loss, Income and Reserve Ratio Projection Update for the Restoration Plan. The meeting will be held in the...

  2. The IAEA co-ordinated research programme on improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Status report. Prepared at the final CRP meeting in Sendai, Japan 25-29 September 1995

    International Nuclear Information System (INIS)

    Pashchenko, A.B.

    1996-12-01

    The present report describes the results of the IAEA Co-ordinated Research Programme (CRP) on ''Improvements of Measurements, Theoretical Computation and Evaluations of Neutron Induced Helium Production Cross Sections''. Summarized is the progress achieved under the CRP in the following areas: measurements of α-production cross sections for structural materials, theoretical computations at (nα) cross sections; measurements of activation cross sections; and improvement of experimental methods for (n,α) investigations. The status report gives also short summaries on the work of each laboratory which contributed to the results of the CRP. Attached is the list of program members and participants of CRP meetings. (author). Refs, 2 figs, 1 tab

  3. How to press-release and take care of expression in articles at press side

    International Nuclear Information System (INIS)

    Hamamoto, Kazuko; Narabayashi, Tadashi; Kobayashi, Masahide; Akizuki, Teruo; Onishi, Hidetoshi

    2008-01-01

    As for the influences of Chuetsu-Oki Earthquake on Kashiwazaki-Kariwa Nuclear Power Station, we can conclude that 'the safety function of the nuclear power station, that is, 'Shutdown', 'Cooling down' and 'Isolating' functioned as per designed even against earthquake beyond assumption, and fundamental nuclear safety could be assured'. Nevertheless, it is said that one of the causes that harmful rumor had spread was due to mass communication media. In the press reports on some nuclear power station when affected by an earthquake and on trouble in the nuclear power station in the future, we will propose that the publication should be really useful for habitants and citizens and be promoted in the positive and expected direction, in order not to make the same mistake as this time. JSME should aim at implement the above-mentioned proposal under cooperation with other academic societies and organizations. (author)

  4. Men exhibit greater fatigue resistance than women in alternated bench press and leg press exercises.

    Science.gov (United States)

    Monteiro, Estêvão R; Steele, James; Novaes, Jefferson S; Brown, Amanda F; Cavanaugh, Mark T; Vingren, Jakob L; Behm, David G

    2017-11-17

    The purpose of this study was to evaluate the influence of sex, exercise order, and rest interval on neuromuscular fatigue resistance for an alternated strength training sequence of bench press (BP) and leg press (LP) exercises. Twelve women and 16 men, both recreationally trained, performed four sessions in a random order: 1) BP followed by LP with three-minutes rest (BP+LP with rest), 2) LP followed by BP with three-minutes rest (LP+BP with rest), 3) BP followed by LP without rest interval (BP+LP no rest), and 4) LP followed by BP without rest interval (LP+BP no rest). Participants performed four sets with 100% of 10RM load to concentric failure with the goal of completing the maximum number of repetitions in both exercises. The fatigue index was analyzed from the first and last sets of each exercise bout. A main effect for sex showed that women exhibited 25.5% (p=0.001) and 24.5% (p=0.001) greater BP and LP fatigue than men respectively when performing 10RM. Men exhibited greater BP (p<0.0001; 34.1%) and LP (p<0.0001; 30.5%) fatigue resistance when a rest period was provided. Men did not show an exercise order effect for BP fatigue and exhibited greater (p=0.0003; 14.5%) LP fatigue resistance when BP was performed first. The present study demonstrated the greater fatigue resistance of men when performing 10RM BP and LP exercises. Since men tend to experience less fatigue with the second exercise in the exercise pairing, women's training programs should be adjusted to ensure they do not parallel men's resistance training programs.

  5. Highlights: Spring Council Meeting

    Science.gov (United States)

    Council members present at the May 24, 1981, meeting were Keiiti Aki, Steven Burges (for Jim Wallis), Peter S. Eagleson, E. R. Engdahl, Charles E. Helsley, James R. Heirtzler, Carl Kisslinger, Leslie H. Meredith, Chris N. K. Mooers, Norman F. Ness, Marcia M. Neugebauer, James J. O'Brien, Richard Rapp, Carl Sagan, James C. Savage, Joseph V. Smith, Fred Spilhaus, Donald L. Turcotte, James A. Van Allen, J. Tuzo Wilson, and Jay Winston (for Elmar R. Reiter until his arrival at 6:50 P.M.). David Strangway, representing the Canadian Geophysical Union, and Peter Steinhauser, representing the European Geophysical Society, were special observers at the meeting. Council meetings are open, and a number of section secretaries, committee chairmen, journal editors, and other members attended. The following major actions were adopted by the Council:The experiment of publishing oceanography and lower-atmosphere papers in JGR Green issues alternate to those containing upper-atmosphere papers will be continued through 1982. From preliminary indications the experiment seems to be working, but a full year of data, including a renewal cycle, is needed to assess the success of the experiment. Final decision will be made prior to the 1983 dues notices.

  6. Public meetings

    CERN Multimedia

    Staff Association

    2013-01-01

    MARS SURVEY 5YR 2015 GENERAL INFORMATION ELECTIONS 2013   COME AND BE INFORMED! Public meetings Tuesday 1st Oct. 10 am Amphi IT, 31-3-004 Meyrin Tuesday 1st Oct. 2 pm Council Chamber, 503-1-001 Meyrin Friday 4 Oct. 10 am Amphi BE, 864-1-D02 Prévessin Monday 7 Oct. 2 pm Council Chamber, 503-1-001 (in English) Meyrin Tuesday 8 Oct. 10 am Amphi Kjell Johnsen, 30-7-018 Meyrin   Overview of the topics to be discussed Recognition of Merit – MARS Outcome of last exercise 2007 to 2013: lessons learned Survey: five-yearly review, give us your opinion General information CVI 2014 Voluntary programmes (PRP, SLS) Elections 2013 Renewal of the Staff Council 2014 - 2015  

  7. Meetings and Meeting Modeling in Smart Environments

    NARCIS (Netherlands)

    Nijholt, Antinus; op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.

    In this paper we survey our research on smart meeting rooms and its relevance for augmented reality meeting support and virtual reality generation of meetings in real time or off-line. The research reported here forms part of the European 5th and 6th framework programme projects multi-modal meeting

  8. Meetings and meeting modeling in smart surroundings

    NARCIS (Netherlands)

    op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.; Nijholt, Antinus; Nishida, T.

    2004-01-01

    In this paper we survey our research on smart meeting rooms and its relevance for augmented reality meeting support and virtual reality generation of meetings in real-time or off-line. Intelligent real-time and off-line generation requires understanding of what is going on during a meeting. The

  9. Learning Meetings and Conferences in Practice

    DEFF Research Database (Denmark)

    Elsborg, Steen; Ravn, Ib

    , Speaker's Cornered, Presentations as Interviews, A Lunch that Fosters Contacts, and Two Free Consultants. The book is based on results from the research and development project "The Learning Meeting." It was conducted by Learning Lab Denmark in collaboration with Danske Bank, Rezidor SAS Hospitality (the...... Radisson SAS hotels), Hotel Legoland, Best Western Nyborg Strand, and Odense Congress Center. This book is a translation of the authors' "Lærende møder og konferencer i praksis", People's Press, 2006....

  10. A superconducting solenoid and press for permanent magnet fabrication

    International Nuclear Information System (INIS)

    Mulcahy, T. M.; Hull, J. R.

    2002-01-01

    For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry

  11. Jatropha press cake as organic fertilizer in lettuce cultivation

    Directory of Open Access Journals (Sweden)

    José R. Mantovani

    Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.

  12. 75 FR 60491 - The Future of Aviation Advisory Committee (FAAC) Subcommittee on Financing; Notice of Meeting

    Science.gov (United States)

    2010-09-30

    ..., announces a meeting of the FAAC Subcommittee on Financing, which will be held in the New Press Room, Denver... needs, challenges, and opportunities of the global economy. The Subcommittee on Financing will address... will be held in the New Press Room, Denver International Airport, 8500 Pe[ntilde]a Boulevard, Main...

  13. The development of a repetition-load scheme for the eccentric-only bench press exercise.

    Science.gov (United States)

    Moir, Gavin L; Erny, Kyle F; Davis, Shala E; Guers, John J; Witmer, Chad A

    2013-01-01

    The purpose of the present study was to develop a repetition-load scheme for the eccentric-only bench press exercise. Nine resistance trained men (age: 21.6 ± 1.0 years; 1-repetition maximum [RM] bench press: 137.7 ± 30.4 kg) attended four testing sessions during a four week period. During the first session each subject's 1-RM bench press load utilizing the stretch-shortening cycle was determined. During the remaining sessions they performed eccentric-only repetitions to failure using supra-maximal loads equivalent to 110%, 120% and 130% of their 1-RM value with a constant cadence (30 reps·min(-1)). Force plates and a three dimensional motion analysis system were used during these final three sessions in order to evaluate kinematic and kinetic variables. More repetitions were completed during the 110% 1-RM condition compared to the 130% 1-RM condition (p=0.01). Mean total work (p=0.046) as well as vertical force (p=0.049), vertical work (p=0.017), and vertical power output (p=0.05) were significantly greater during the 130% 1-RM condition compared to the 110% 1-RM condition. A linear function was fitted to the number of repetitions completed under each load condition that allowed the determination of the maximum number of repetitions that could be completed under other supra-maximal loads. This linear function predicted an eccentric-only 1-RM in the bench press with a load equivalent to 164.8% 1-RM, producing a load of 227.0 ± 50.0 kg. The repetition-load scheme presented here should provide a starting point for researchers to investigate the kinematic, kinetic and metabolic responses to eccentric-only bench press workouts.

  14. Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

    Directory of Open Access Journals (Sweden)

    A. A. Antsifirov

    2014-01-01

    Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

  15. Press problem related to nuclear energy news reporting

    International Nuclear Information System (INIS)

    Arai, Mitsuo

    2008-01-01

    Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

  16. Efficient simulation of press hardening process through integrated structural and CFD analyses

    International Nuclear Information System (INIS)

    Palaniswamy, Hariharasudhan; Mondalek, Pamela; Wronski, Maciek; Roy, Subir

    2013-01-01

    Press hardened steel parts are being increasingly used in automotive structures for their higher strength to meet safety standards while reducing vehicle weight to improve fuel consumption. However, manufacturing of sheet metal parts by press hardening process to achieve desired properties is extremely challenging as it involves complex interaction of plastic deformation, metallurgical change, thermal distribution, and fluid flow. Numerical simulation is critical for successful design of the process and to understand the interaction among the numerous process parameters to control the press hardening process in order to consistently achieve desired part properties. Until now there has been no integrated commercial software solution that can efficiently model the complete process from forming of the blank, heat transfer between the blank and tool, microstructure evolution in the blank, heat loss from tool to the fluid that flows through water channels in the tools. In this study, a numerical solution based on Altair HyperWorks® product suite involving RADIOSS®, a non-linear finite element based structural analysis solver and AcuSolve®, an incompressible fluid flow solver based on Galerkin Least Square Finite Element Method have been utilized to develop an efficient solution for complete press hardening process design and analysis. RADIOSS is used to handle the plastic deformation, heat transfer between the blank and tool, and microstructure evolution in the blank during cooling. While AcuSolve is used to efficiently model heat loss from tool to the fluid that flows through water channels in the tools. The approach is demonstrated through some case studies

  17. Classification of soil systems on the basis of transfer factors of radionuclides from soil to reference plants. Report of the final research coordination meeting organized by the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture

    International Nuclear Information System (INIS)

    2006-06-01

    The IAEA Basic Safety Standards for Radiation Protection include the general requirement to keep all doses as low as reasonably achievable, taking account of economic and social considerations, within the overall constraint of individual dose limits. National and Regional authorities have to set release limits for radioactive effluent and also to establish contingency plans to deal with an uncontrolled release following an accident or terrorist activity. It is normal practice to assess radiation doses to man by means of radiological assessment models. In this context the IAEA published (1994), in cooperation with the International Union of Radioecologists (IUR), a Handbook of Parameter Values for the Prediction of Radionuclide Transfer in Temperate Environments to facilitate such calculations. The obvious limitation of the Handbook is that the data on soil-to-plant transfer of radionuclides are strictly relevant only to temperate climates. Therefore, the IAEA, together with the United Nations Food and Agriculture Organization and the IUR, conducted a coordinated research project (CRP), to obtain similar data in tropical and sub-tropical regions. A conclusion of this research was that some combinations of ecosystems and radionuclides do not behave as might be expected. A consultants meeting held in May 1998 produced a proposal for a CRP to address the issue of identifying such situations in temperate as well as tropical and sub-tropical conditions

  18. Concept Design of Movable Beam of Hydraulic Press

    Directory of Open Access Journals (Sweden)

    Li Yancong

    2017-01-01

    Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

  19. Fabrication and properties of hot pressed bismuth tungstate

    International Nuclear Information System (INIS)

    Streicher, W.L.

    1978-01-01

    Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements

  20. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    Bola

    2015-05-13

    May 13, 2015 ... Seven different substrates (A to G) were prepared from saw dust, palm press ... can grow in a wide range of soil types with relatively low ..... documented to include; cotton waste, sugar cane ..... Canada wood ash sources. Can.

  1. Poland's Press and Broadcasting Under the Gierek Regime

    Science.gov (United States)

    Shanor, Donald R.

    1974-01-01

    Reports that the Polish press and broadcasting have been carrying more news and less propaganda since the 1970 Baltic upheavel and that the Polish media are generally allowed more freedom than media in other Communist nations. (RB)

  2. Press releases — the new trend in science communication

    DEFF Research Database (Denmark)

    Autzen, Charlotte

    2014-01-01

    Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

  3. Cars & Censorship: How Advertising Pressure Can Corrupt a Free Press.

    Science.gov (United States)

    Collins, Ronald K. L.

    1992-01-01

    Discusses "private censorship" as it relates to car dealers and television advertising. Defines "private censorship" as that which occurs when a broadcaster suppresses or alters a news story that affects commercial clients (advertisers). Makes recommendations for a freer press. (JOW)

  4. Public meeting

    CERN Multimedia

    Staff Association

    2015-01-01

    Last Monday at 9 a.m. the Council Chamber was full, with several people standing, for the public meeting of the Staff Association. Simultaneously, many of our colleagues followed the presentations in the Amphitheatre in Prévessin. We would like to thank all of you for the interest you have shown and for your feedback. In the introduction we explained how the Staff Association represents the staff in its discussions with Management and Member States, and how the staff itself defined, by its participation in the 2013 staff survey, the priority assigned to various points related to the employment conditions. The position of the Staff Association regarding the new contract policy, to be implemented as of 31 March 2015 after approval by Council, was stated. Then, in the framework of the 2015 five-yearly review, the general approach that we would like to see for the new career structure, was explained. Concerning diversity, based on what we know about the situation in other international organiza...

  5. Fruitful meeting

    CERN Multimedia

    Mike Lamont

    2010-01-01

    The annual meeting for the LHC Performance Workshop was held in Chamonix from 25 to 29 January 2010 in the Centre de Congrès Le Majestic. The Workshop focused on how to reach the maximum operating energy.   The LHC Performance Workshop took place between 25 and 29 January 2010 in a rather chilly Chamonix. Following the successful start of beam commissioning last year, there remain a number of important questions about the near future of the machine. Topics discussed included the maximum operational energy that will be possible in 2010 and the steps need to go above the planned 2010 start-up energy of 3.5 TeV. Of particular importance were the required splice and magnet consolidation measures that would be demanded by an increase above this energy.  The energy in the magnets and beams will always represent a considerable threat, and the possible impact of an incident and the potential measures required to speed up a recovery were put on the table. Safety is critical and there were...

  6. Modelling of powder die compaction for press cycle optimization

    Directory of Open Access Journals (Sweden)

    Bayle Jean-Philippe

    2016-01-01

    Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.

  7. Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

    Science.gov (United States)

    2012-01-05

    Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride

  8. PRESS: A Novel Framework of Trajectory Compression in Road Networks

    OpenAIRE

    Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu

    2014-01-01

    Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...

  9. Corporate social responsibility's discourse in lithuanian business press

    OpenAIRE

    Marčenkovas, Marius

    2014-01-01

    The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...

  10. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-02-07

    This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.

  11. Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.

    Science.gov (United States)

    Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L

    2012-09-01

    To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.

  12. Final Report to the Department of the Energy for Project Entitled Rare Isotope Science Assessment Committee

    International Nuclear Information System (INIS)

    Shapero, Donald; Meyer, Timothy I.

    2007-01-01

    The Rare Isotope Science Assessment Committee (RISAC) was convened by the National Research Council in response to an informal request from the DOE's Office of Nuclear Physics and the White House Office of Management and Budget. The charge to the committee is to examine and assess the broader scientific and international contexts of a U.S.-based rare-isotope facility. The committee met for the first time on December 16-17, 2005, in Washington, DC, and held three subsequent meetings. The committee's's final report was publicly released in unedited, prepublication form on Friday, December 8, 2006. The report was published in full-color by the National Academies Press in April 2007. Copies of the report were distributed to key decision makers and stakeholders around the world.

  13. Formacion de Formadores en Planeamiento y Administracion de la Education: Informe Final. Reunion Tecnica de la Red REPLAD, Campinas, Sao Paulo, Brasil, 9-13 de noviembre de 1987. (Educational Development of Professionals in Educational Planning and Administration: Final Report. Proceedings of the Meeting of the Major Project for Education (Sao Paulo, Brazil, November 9-13, 1987).

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Santiago (Chile). Regional Office for Education in Latin America and the Caribbean.

    This final report provides a synthesis of conference presentations by representatives from institutions in 17 Latin American and the Caribbean nations. The material includes descriptions about institutions of higher education planning and developing of their respective schools of education, ministries of education, and national and regional…

  14. Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature

    Science.gov (United States)

    Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann

    2002-01-01

    In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...

  15. Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Zibaei

    2016-12-01

    Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

  16. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    Science.gov (United States)

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Robert C. [Texas A& M University; Kamon, Teruki [Texas A& M University; Toback, David [Texas A& M University; Safonov, Alexei [Texas A& M University; Dutta, Bhaskar [Texas A& M University; Dimitri, Nanopoulos [Texas A& M University; Pope, Christopher [Texas A& M University; White, James [Texas A& M University

    2013-11-18

    Overview The High Energy Physics Group at Texas A&M University is submitting this final report for our grant number DE-FG02-95ER40917. This grant has supported our wide range of research activities for over a decade. The reports contained here summarize the latest work done by our research team. Task A (Collider Physics Program): CMS & CDF Profs. T. Kamon, A. Safonov, and D. Toback co-lead the Texas A&M (TAMU) collider program focusing on CDF and CMS experiments. Task D: Particle Physics Theory Our particle physics theory task is the combined effort of Profs. B. Dutta, D. Nanopoulos, and C. Pope. Task E (Underground Physics): LUX & NEXT Profs. R. Webb and J. White(deceased) lead the Xenon-based underground research program consisting of two main thrusts: the first, participation in the LUX two-phase xenon dark matter search experiment and the second, detector R&D primarily aimed at developing future detectors for underground physics (e.g. NEXT and LZ).

  18. Elbow joint fatigue and bench-press training.

    Science.gov (United States)

    Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

    2014-01-01

    Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

  19. Movement Features Which Describe the Flat Bench Press

    Directory of Open Access Journals (Sweden)

    Król Henryk

    2017-06-01

    Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

  20. Freedom of the Press In the Scope of Human Rights

    Directory of Open Access Journals (Sweden)

    Sri Ayu Astuti

    2014-01-01

    Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the  press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96

  1. Terrorism in the Basque press (1990, 2000, 2008 and 2009. Analysis of newspaper editorials about ETA’s fatal attacks

    Directory of Open Access Journals (Sweden)

    José-María Caminos-Marcet, Ph.D.

    2013-01-01

    Full Text Available This article presents an analysis of the editorials published by the Basque press in 1990, 2000, 2008 and 2009, when ETA carried out fatal attacks. The objective is to examine the treatment given by the different Basque newspapers to terrorism in their most important opinion texts, which reflect their ideology. The initial hypothesis is that the editorial line used by the Basque press to address ETA’s attacks has changed remarkably during the analysed years, going from the virtual absence of editorials to the use of editorials as active instruments in the fight against violence. By 2009, the Basque press had finally defined its strategy to combat ETA’s terrorism, and this was perfectly reflected in their editorials.

  2. AIPM Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John Mookken

    2006-06-30

    The final AIPM project report consists of six sections. Each section includes information on the original AIPM project and extension work on the high temperature design. The first section (1) provides an overview of the program and highlights the significant targets to meet at the end of the program. The next section (2) summarizes the significant technical accomplishments by the SEMIKRON AIPM team during the course of the project. Greater technical details are provided in a collection of all the quarterly reports which can be found in the appendix. Section three (3) presents some the more significant technical data collected from technology demonstrators. Section four (4) analyzes the manufacturing cost or economic aspects of producing 100,000 units/yr. Section five (5) describes the commercialization efforts of the AIPM technology into the automotive market. The last section (6) recommends follow on work that will build on the efforts and achievements of the AIPM program.

  3. PRESS-based EFOR algorithm for the dynamic parametrical modeling of nonlinear MDOF systems

    Science.gov (United States)

    Liu, Haopeng; Zhu, Yunpeng; Luo, Zhong; Han, Qingkai

    2017-09-01

    In response to the identification problem concerning multi-degree of freedom (MDOF) nonlinear systems, this study presents the extended forward orthogonal regression (EFOR) based on predicted residual sums of squares (PRESS) to construct a nonlinear dynamic parametrical model. The proposed parametrical model is based on the non-linear autoregressive with exogenous inputs (NARX) model and aims to explicitly reveal the physical design parameters of the system. The PRESS-based EFOR algorithm is proposed to identify such a model for MDOF systems. By using the algorithm, we built a common-structured model based on the fundamental concept of evaluating its generalization capability through cross-validation. The resulting model aims to prevent over-fitting with poor generalization performance caused by the average error reduction ratio (AERR)-based EFOR algorithm. Then, a functional relationship is established between the coefficients of the terms and the design parameters of the unified model. Moreover, a 5-DOF nonlinear system is taken as a case to illustrate the modeling of the proposed algorithm. Finally, a dynamic parametrical model of a cantilever beam is constructed from experimental data. Results indicate that the dynamic parametrical model of nonlinear systems, which depends on the PRESS-based EFOR, can accurately predict the output response, thus providing a theoretical basis for the optimal design of modeling methods for MDOF nonlinear systems.

  4. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    McLuckey, Scott [Purdue Univ., West Lafayette, IN (United States)

    2016-08-30

    The overall objectives of this research effort were to expand the capabilities of spectroscopic and ion chemistry tools for the structural characterization of polyatomic ions of relevance to the broad mission of the Department of Energy. Mass spectrometry currently plays an important role in virtually all of the molecular sciences by virtue of the value of the accurate measurement of mass and the structural information that can be derived from various structural probes based on, for example, ion chemistry, ion mobility, and ion spectroscopy. Mass spectrometry has long played important roles in supporting the missions of the Department of Energy and its predecessor agencies, particularly in the area of isotopic analysis of nuclides. Molecular mass spectrometry has played increasingly important roles is many aspects of the production and use of energy as the nation has diversified its energy portfolio. There is an ongoing need for the expansion of the measurement capabilities associated with molecular mass spectrometry that involves both technological developments as well as improved understanding of the chemical and physical processes that take place upon ionization and ion analysis in a mass spectrometer. Advances in mass spectrometry have impacted science broadly and further advances will be required to meet the needs of current energy and environmental research. This program has historically focused on the structural characterization of polyatomic ions, usually within the context of a tandem mass spectrometry experiment. A wide variety of physical and chemical processes can take place within a mass spectrometer and advantage can be taken of such processes to enhance the quality and quantity of information that can be derived for a given chemical system of interest. For example, ions can undergo interactions with neutral molecules/atoms, light, surfaces, electrons, or oppositely charged ions. The outcomes of all such interactions can be sensitive to the structures

  5. 76 FR 20819 - Departmental Offices; Debt Management Advisory Committee Meeting

    Science.gov (United States)

    2011-04-13

    ... prior to making its final decisions on major financing operations. Historically, this advice has been.... 2, Sec. 3. Although the Treasury's final announcement of financing plans may not reflect the... statement of economic conditions and financing estimates. This briefing will give the press an opportunity...

  6. 77 FR 62312 - Debt Management Advisory Committee; Meeting

    Science.gov (United States)

    2012-10-12

    ... financial community prior to making its final decisions on major financing operations. Historically, this... committee under 5 U.S.C. App. 2, 3. Although the Treasury's final announcement of financing plans may not... of a statement of economic conditions and financing estimates. This briefing will give the press an...

  7. 77 FR 22390 - Debt Management Advisory Committee Meeting

    Science.gov (United States)

    2012-04-13

    ... financial community prior to making its final decisions on major financing operations. Historically, this... committee under 5 U.S.C. App. 2, 3. Although the Treasury's final announcement of financing plans may not... of a statement of economic conditions and financing estimates. This briefing will give the press an...

  8. 78 FR 41832 - Departmental Offices; Debt Management Advisory Committee Meeting

    Science.gov (United States)

    2013-07-11

    ... making its final decisions on major financing operations. Historically, this advice has been offered by.... 2, Sec. 3. Although the Treasury's final announcement of financing plans may not reflect the... statement of economic conditions and financing estimates. This briefing will give the press an opportunity...

  9. 75 FR 39729 - Departmental Offices; Debt Management Advisory Committee Meeting

    Science.gov (United States)

    2010-07-12

    ... final decisions on major financing operations. Historically, this advice has been offered by debt.... Although the Treasury's final announcement of financing plans may not reflect the recommendations provided... economic conditions and financing estimates. This briefing will give the press an opportunity to ask...

  10. Engaging and Supporting a University Press Scholarly Community

    Directory of Open Access Journals (Sweden)

    Megan Taylor

    2018-03-01

    Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.

  11. Similar acute physiological responses from effort and duration matched leg press and recumbent cycling tasks

    Directory of Open Access Journals (Sweden)

    James Steele

    2018-02-01

    Full Text Available The present study examined the effects of exercise utilising traditional resistance training (leg press or ‘cardio’ exercise (recumbent cycle ergometry modalities upon acute physiological responses. Nine healthy males underwent a within session randomised crossover design where they completed both the leg press and recumbent cycle ergometer conditions. Conditions were approximately matched for effort and duration (leg press: 4 × 12RM using a 2 s concentric and 3 s eccentric repetition duration controlled with a metronome, thus each set lasted  60 s; recumbent cycle ergometer: 4 × 60 s bouts using a resistance level permitting 80–100 rpm but culminating with being unable to sustain the minimum cadence for the final 5–10 s. Measurements included VO2, respiratory exchange ratio (RER, blood lactate, energy expenditure, muscle swelling, and electromyography. Perceived effort was similar between conditions and thus both were well matched with respect to effort. There were no significant effects by ‘condition’ in any of the physiological responses examined (all p > 0.05. The present study shows that, when both effort and duration are matched, resistance training (leg press and ‘cardio’ exercise (recumbent cycle ergometry may produce largely similar responses in VO2, RER, blood lactate, energy expenditure, muscle swelling, and electromyography. It therefore seems reasonable to suggest that both may offer a similar stimulus to produce chronic physiological adaptations in outcomes such as cardiorespiratory fitness, strength, and hypertrophy. Future work should look to both replicate the study conducted here with respect to the same, and additional physiological measures, and rigorously test the comparative efficacy of effort and duration matched exercise of differing modalities with respect to chronic improvements in physiological fitness.

  12. TA-03-0035 Press Building – D&D

    Energy Technology Data Exchange (ETDEWEB)

    Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-02

    The Press Building was constructed in 1954 with 15,073 ft2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

  13. Asynchronous decision making in a memorized paddle pressing task.

    Science.gov (United States)

    Dankert, James R; Olson, Byron; Si, Jennie

    2008-12-01

    This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.

  14. The regulation of press freedoms (1863-1867

    Directory of Open Access Journals (Sweden)

    Laurence Coudart

    2015-10-01

    Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.

  15. Method for hot pressing irregularly shaped refractory articles

    Science.gov (United States)

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  16. Advertising presence on the visual configuration of the digital press

    Directory of Open Access Journals (Sweden)

    Belinda de Frutos Torres

    2016-07-01

    Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.

  17. Film Advertising in the Albanian Press before World War II

    Directory of Open Access Journals (Sweden)

    Vjollca Hysi Panajoti

    2015-05-01

    Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

  18. Comparison of concentric and eccentric bench press repetitions to failure.

    Science.gov (United States)

    Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

    2015-04-01

    Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

  19. Process design of press hardening with gradient material property influence

    International Nuclear Information System (INIS)

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-01-01

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  20. Factors influencing the creep strength of hot pressed beryllium

    International Nuclear Information System (INIS)

    Webster, D.; Crooks, D.D.

    1975-01-01

    The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

  1. Vacuum hot pressing of titanium-alloy powders

    International Nuclear Information System (INIS)

    Malik, R.K.

    1975-01-01

    Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements

  2. 76 FR 9742 - Agenda and Notice of Public Meeting of the New Jersey State Advisory Committee

    Science.gov (United States)

    2011-02-22

    .... Commission on Civil Rights and the Federal Advisory Committee Act (FACA), that briefing and planning meetings... of the planning meeting is to plan future activities. The purpose of the press conference is to... contact the ERO. See contact information below. Persons who are deaf or hearing-impaired who will attend...

  3. Participation spaces for the construction of collective memory in the Spanish digital press

    Directory of Open Access Journals (Sweden)

    Pedro MOLINA RODRÍGUEZ-NAVAS

    2014-10-01

    Full Text Available The Spanish press has published digital spaces dedicated to the recovery of democratic historical memory or personal memory citizenship in general. To do has requested the participation of users. Mostly, the contributions have included personal photographic materials with or without descriptive accounts but in other cases the forms of intervention have been different.In this paper we analyze the main areas of this type that have been published in recent years. We study your objectives and forms of participation required and the final documents. The analysis results allow us to see what formulas have been successful and what elements are involved to get it.Finally, the conclusions we make a series of recommendations regarding the patterns of participation and the construction of spaces that truly allow us to relate personal stories with the general history, thus making contributions to the collective memory from new knowledge paradigms chords with the network society and social diversity.

  4. Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

    Science.gov (United States)

    Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

    2017-02-13

    This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

  5. Equal channel angular pressing of pure aluminium—an analysis

    Indian Academy of Sciences (India)

    Abstract. Equal channel angular pressing (ECAP) is a novel technique for producing ultra fine grain struc- tures in submicron level by introducing a large amount of shear strain into the materials without changing the billet shape or dimensions. This process is well suited for aluminium alloys and is capable of producing ultra.

  6. EMG analysis and modelling of flat bench press using artificial ...

    African Journals Online (AJOL)

    The objective of this study was to evaluate the contribution of particular muscle groups during the Flat Bench Press (FBP) with different external loads. Additionally, the authors attempted to determine whether regression models or Artificial Neural Networks (ANNs) can predict FBP results more precisely and whether they can ...

  7. Democratic Socialism: Toward a Fifth Theory of the Press.

    Science.gov (United States)

    Picard, Robert G.

    For more than 25 years, the "four theories" paradigm has been dominant in the study of the relationships among the press, society, and the state. Asserting that the major approaches to such study are the libertarian, social responsibility, authoritarian, and Soviet/communist theories, this paradigm fails to account for economic and…

  8. "...Establish the Student Press--And Stifle It!"

    Science.gov (United States)

    McCallie, Franklin

    1990-01-01

    Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

  9. Picture This: 4-H Press Corps Builds Life Skills

    Science.gov (United States)

    Clary, Christy D.

    2018-01-01

    A picture is worth a thousand words! Extension professionals are often looking for the picture that best captures an event and tells its story. Look beneath the surface, though, and a picture is worth much more. Developing a 4-H press corps results in a collection of useful photos but has the added benefit of providing 4-H members with an…

  10. Water holding capacity and enzymatic modification of pressed potato fibres

    NARCIS (Netherlands)

    Ramasamy, U.

    2014-01-01

    Cell wall polysaccharides (CWPs) contribute to the water holding capacity (WHC) of fibre rich feeds, such as pressed potato fibres (PPF). However, the role of CWPs on the WHC of PPF was unidentified so far.

    PPF was characterized to be abundant in arabinogalactan (AG) linked

  11. Quid pro quo: tobacco companies and the black press.

    Science.gov (United States)

    McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

    2012-04-01

    We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

  12. The nuclear issue in the cuban press. Challenges and realities

    International Nuclear Information System (INIS)

    Contreras Izquierdo, Marta; Rodriguez Guerra, Ingrids; Gonzalez Montoto, Iosbel; Fernandez Rondon, Manuel

    2005-01-01

    The work presents an analysis of the impact of nuclear issue on the Cuban press from 1990 to 2005 that was carried out by a group of communications specialists from nuclear area. An analysis of main challenges and actions of this group, aimed at informing the public the present situation of the Cuban nuclear programme and its perspectives, was also included

  13. Finishing procedures action on mechanical characteristics of pressed ceramics

    Directory of Open Access Journals (Sweden)

    Mohamed Abdel Moniem Ahmed

    2018-06-01

    Conclusions& significance: Grinding & finishing procedures of pressed ceramics showed significant effect Of drill speed and polishing technique over flexural strength, As Grinding with no finishing and polishing procedure showed lowest flexural Strength values followed by finishing and polishing procedure followed by finishing and polishing with polishing paste procedure.

  14. Process considerations for hot pressing ceramic nuclear waste forms

    International Nuclear Information System (INIS)

    Wilson, C.N.; Brite, D.W.

    1981-01-01

    Spray calcined simulated ceramic nuclear waste powders were hot pressed in graphite, nickel-lined graphite and ZrO 2 -lined Al 2 O 3 dies. Densification, initial off-gas, waste element retention and pellet-die interactions were evaluated. Indicated process considerations and limitations are discussed. 15 figures

  15. Press Ideology and Organizational Control in Hong Kong.

    Science.gov (United States)

    Chan, Joseph Man; Lee, Chin-Chuan

    1988-01-01

    Surveys the entire Chinese journalist population of Hong Kong to determine how news organizations in the highly politicized environment of Hong Kong exercise institutional control on recruitment and newswork. Finds that press ideology is a major determinant of its organizational control. (MS)

  16. Nanoindentation hardness of hot-pressed boron suboxide

    International Nuclear Information System (INIS)

    Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos

    2011-01-01

    Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  17. Press travel to the Mochovce power plant in Slovakia

    International Nuclear Information System (INIS)

    1998-07-01

    This press dossier gives, first, a general presentation of the Mochovce power plant of the republic of Slovakia (history, technical characteristics, safety aspects, technical particularities of VVER 440/213 reactors (safety analysis, recent improvements), financing of the modernization project). Then, the activities of the Framatome group in central and eastern Europe are presented (partnerships, cooperation agreements and contracts). (J.S.)

  18. Constitutional Provisions on the Press: A World View.

    Science.gov (United States)

    Paraschos, Manny

    A study examined the legal treatment of the press in constitutions or other basic legal institutional documents from around the world. Sixty-three constitutions or basic documents from the Western World, the Communist Bloc, the Middle East, Africa, Southeast Asia, and Latin America were analyzed. Analysis revealed that most constitutions open with…

  19. The Surrender of Tobruk in 1942: Press reports and soldiers ...

    African Journals Online (AJOL)

    The British and South African papers began to demand answers from politicians and military leaders for this shocking and unexpected catastrophe. The press ... Keywords: Prisoners of war (POWs), World War II, Union Defence Force, Erwin Rommel, Auchinleck, Ritchie, HB Klopper, South Africa, Eighth Army, Gazala ...

  20. Toward a Normative Theory of Freedom of the Press.

    Science.gov (United States)

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  1. Back-pressure Forging Using a Servo Press

    OpenAIRE

    河本, 基一郎; Kawamoto, Kiichiro

    2015-01-01

    博士論文要旨Abstract 以下に掲載:International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者:Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

  2. Nanoindentation hardness of hot-pressed boron suboxide

    Energy Technology Data Exchange (ETDEWEB)

    Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)

    2011-07-15

    Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  3. Press-fit bipolar radial head arthroplasty, midterm results

    NARCIS (Netherlands)

    Kodde, Izaäk F.; Heijink, Andras; Kaas, Laurens; Mulder, Paul G. H.; van Dijk, C. Niek; Eygendaal, Denise

    2016-01-01

    Theoretical advantages of bipolar compared with monopolar radial head arthroplasty include better accommodation of radiocapitellar malalignment, reduction of capitellar abrasion, and reduction of stress at the bone-implant interfaces. Our purpose was to report the midterm results of press-fit

  4. Book Review: Stars (Copyright 1985, Golden Press; New York)

    Science.gov (United States)

    Marigza, R. N., Jr.

    2009-06-01

    Stars is a part of the Golden Guides collection produced by Golden Press. It is a small 160 page paperback guide to the constellations, the sun, the moon, planets, and other celestial bodies. The book is convenient to carry along wherever you go, making it an easy to access reference material.

  5. Ethics and the Press: Readings in Mass Media Morality.

    Science.gov (United States)

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by…

  6. The Press of the Soviet Union: A Bibliography.

    Science.gov (United States)

    Bergethon, Bruce; And Others

    Compiled in response to the need for more information on the differences between the press systems of the United States and the Soviet Union, this bibliography contains 240 entries. Consisting of newspaper articles, journal articles, books, and pamphlets, the bibliography provides an overview of the different journalistic philosophies of the two…

  7. Introducing Collabra, OA Journal from University of California Press

    OpenAIRE

    Morgan, Daniel

    2015-01-01

    An introductory presentation of Collabra, the open access mega journal from University of California Press, highlighting its unique business model which shares and spreads revenue back to the research community. (Presented at the FORCE 2015 conference at the University of Oxford, January 13, 2015.)

  8. Student Press and Distribution Issues: Rights and Responsibilities.

    Science.gov (United States)

    Bartlett, Larry D.

    1984-01-01

    This review analyzes case law in the area of student press and distribution and offers some guidelines for developing and implementing school policy and rules. Litigation is reviewed in order to clarify students' rights, limitations on administrative authority in matters of censorship and prior restraint, and actions in connection with writing and…

  9. Performing “responsibility” and “conspiracy” through press ...

    African Journals Online (AJOL)

    In 2003, the Australian cricketer Shane Warne was suspected and convicted of doping. The purpose of this article was to understand how he tried to resolve the problem/dilemma of being suspected and convicted of doping through three press statements, which he delivered to the media during the 2003 Cricket World Cup ...

  10. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    In the last few decades, rapid global demand for edible oils has resulted in a significant increase in the land area of oil crop cultivation. In the process of extraction of palm oil from oil palm fruit, biomass materials such as palm pressed fibre (PPF) are generated as waste products. This research was undertaken to evaluate ...

  11. The Press, the Government, and the Ethics Vacuum.

    Science.gov (United States)

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  12. Remedial action programs annual meeting: Meeting notes

    International Nuclear Information System (INIS)

    1987-01-01

    The US Department of Energy Grand Junction Projects Office was pleased to host the 1987 Remedial Action programs Annual Meeting and herein presents notes from that meeting as prepared (on relatively short notice) by participants. These notes are a summary of the information derived from the workshops, case studies, and ad hoc committee reports rather than formal proceedings. The order of the materials in this report follows the actual sequence of presentations during the annual meeting

  13. Minutes of the IFMIF technical meeting

    International Nuclear Information System (INIS)

    Nakamura, H.; Takeda, M.; Ida, M.; Maebara, S.; Yutani, T.; Sugimoto, M.

    2004-03-01

    The IFMIF Technical Meeting was held on December 4-5, 2003 at Shiran-kaikan, Kyoto University. The main objectives are 1) to finalize the Comprehensive Design Report (CDR), 2) to discuss IFMIF cost and organization, 3) to review technical status of major systems, transition phase activities and EVEDA plan. This report presents a brief summary of the results of the meeting. Agenda, participants list and presentation materials are attached as Appendix. (author)

  14. NEWS: AAPT Summer Meeting

    Science.gov (United States)

    Mellema, Steve

    2000-11-01

    .andrew.cmu.edu/projects/visual. David Sokoloff (University of Oregon) and Priscilla Laws (Dickinson College) led a discussion session on the Interactive Lecture Demonstrations that they have been developing to promote active learning in the classroom. Loren Winters of the North Carolina School of Science and Mathematics showed some very fine work done with digital video cameras, both in producing motion videos for frame-by-frame analysis and in producing still images of high-speed phenomena. Finally, Patrick Tam of Humboldt State University in California talked about the Multimedia Resource for Learning and Online Teaching (MERLOT), a project to organize and review the proliferation of internet-based teaching materials that are rapidly becoming available. Their purpose is to make it easier for teachers like us to sift through the plethora of new innovations, to locate those that are potentially useful in our teaching, and finally to implement them effectively. You can check out the project on the web at www.merlot.org. As is evident from the number of sessions of contributed papers and the tandem conference, the quality and quantity of physics education research into new curricula and teaching methods continue to increase. A number of interesting areas were discussed including interactive lecture techniques, studio-classroom approaches combining lectures and labs, assessment techniques, and identifying and correcting student misconceptions. In addition to the plenary talks on current research topics in physics mentioned above, there were sessions on Space Physics and Hot Topics in Physics. There were sessions on professional and career concerns including Preparing Future Physics Faculty, New Faculty Experiences and Concerns, Balancing Career and Family, How Physics Topics Support the Job Market and Recruiting and Retaining Women in Physics. Whether one was a high school teacher or a university professor, this was an enjoyable and educational meeting. We all look forward to the Winter 2001 meeting from

  15. Finite element modelling and associated experimentations to optimize and predict the pressing cycle of a future AMBB manufacturing press

    International Nuclear Information System (INIS)

    Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.

    2014-01-01

    This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)

  16. The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

    Science.gov (United States)

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

  17. Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee

    2005-10-31

    Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

  18. The early moments of Social Help and its buildings for childhood. The press as a means of propaganda

    Directory of Open Access Journals (Sweden)

    Cristina González Maza

    2010-03-01

    Full Text Available The aim of this work is the study of Social Help, one of the most important aid organizations and greater activity in the recent past in Spain.Emerged to meet the needs of a population without means for the devastating effects of war. Of all the buildings for the poor, large numbers were intended for children's world.To better understand the operation of this organization, besides the consultation of somemonographs, managing the local press has been a great help, since it is a reflection of the society in wich it arises.

  19. Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses

    Science.gov (United States)

    X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan

    2011-01-01

    This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...

  20. Let’s have a meeting: How hospitals use scheduled meetings to support cross-boundary collaboration

    DEFF Research Database (Denmark)

    Prætorius, Thim; Hasle, Peter; Nielsen, Anders Paarup

    2018-01-01

    of meetings, we add to previous research studying when meetings are used (e.g., task and input uncertainty). In particular, we focus on meetings’ role for achieving collaboration across occupational and departmental boundaries and for developing the collaboration skills component of organizational social...... and help those involved to solve concrete care tasks. Meetings are often inter-disciplinary, thereby having the potential to develop relations, common goals and trust (organizational social capital components) across occupational and departmental boundaries. For hospital managers, our findings...... are important because they can use meetings to respond to the pressing need for more and better intra-organizational health care collaboration. Using meetings sensibly also allows hospitals to benefit from the positive outcomes of collaboration and social capital (e.g., knowledge sharing, performance...