WorldWideScience

Sample records for medium pressure

  1. Turbulent interstellar medium and pressure-bounded molecular clouds

    International Nuclear Information System (INIS)

    Maloney, P.

    1988-01-01

    The existence of turbulence throughout the interstellar medium suggests that an appropriate value for the average pressure may be P/K larger than about 10,000. Negative-index polytropic models of interstellar clouds in equilibrium with an external medium at these pressures are predicted to have sizes, line widths, masses, and size-line width and size-density relations in good agreement with those observed and inferred for dark clouds. Thus these observed features of interstellar clouds do not require that they be completely self-gravitating or 'virialized' in the commonly used sense. 41 references

  2. Photolytic removal of DBPs by medium pressure UV in swimming pool water

    DEFF Research Database (Denmark)

    Hansen, Kamilla Marie Speht; Zortea, R.; Piketty, A.

    2013-01-01

    Medium pressure UV is used for controlling the concentration of combined chlorine (chloramines) in many public swimming pools. Little is known about the fate of other disinfection by-products (DBPs) in UV treatment. Photolysis by medium pressure UV treatment was investigated for 12 DBPs reported...

  3. The thermal pressure distribution of a simulated cold neutral medium

    Energy Technology Data Exchange (ETDEWEB)

    Gazol, Adriana, E-mail: a.gazol@crya.unam.mx [Centro de Radioastronomía y Astrofísica, UNAM, A. P. 3-72, c.p. 58089 Morelia, Michoacán (Mexico)

    2014-07-01

    We numerically study the thermal pressure distribution in a gas with thermal properties similar to those of the cold neutral interstellar gas by analyzing three-dimensional hydrodynamic models in boxes with sides of 100 pc with turbulent compressible forcing at 50 pc and different Mach numbers. We find that at high pressures and for large Mach numbers, both the volume-weighted and the density-weighted distributions can be appropriately described by a log-normal distribution, whereas for small Mach numbers they are better described by a power law. Thermal pressure distributions resulting from similar simulations but with self-gravity differ only for low Mach numbers; in this case, they develop a high pressure tail.

  4. Pressure-assisted forming of non-concentric tubular cross sections with solid medium

    DEFF Research Database (Denmark)

    Alves, Luis M.; Silva, Carlos M.A.; Nielsen, Chris Valentin

    2017-01-01

    hydroforming) or elastomers (tube rubber forming) as pressuring medium, the subject matter of this article is centred in the utilization of low melting point, recyclable, metallic alloys as solid pressurizing medium. The aims and scope of the article are centred on the feasibility of forming straight carbon...... steel tubes into complex gooseneck geometries with non-concentric cross sections using lead as a solid pressuring medium and employing a double-action cam-driven tool system. The presentation is focused on the tool system, on its adequacy to produce customized tubular components, on the required forming...

  5. Modelling surface pressure fluctuation on medium-rise buildings

    NARCIS (Netherlands)

    Snæbjörnsson, J.T.; Geurts, C.P.W.

    2006-01-01

    This paper describes the results of two experiments into the fluctuating characteristics of windinduced pressures on buildings in a built-up environment. The experiments have been carried out independently in Iceland and The Netherlands and can be considered to represent two separate cases of

  6. The dependence of molecular transmembrane electrotransfer efficiency on medium conductivity and osmotic pressure

    OpenAIRE

    Jakutavičiūtė, Milda; Ruzgys, Paulius; Šatkauskas, Saulius

    2014-01-01

    The electrotransfer efficiency was evaluated for different external medium conductivities, osmotic pressures and electric pulse voltages. It was found that increase in conductivity or decrease in electric pulse strength decreases electrotransfer efficiency. Decrease in osmotic pressure tends to decrease electrotransfer efficiency.

  7. Hydrogen degradation of 21-6-9 and medium carbon steel by disc pressure test

    International Nuclear Information System (INIS)

    Zhou, D.H.; Zhou, W.X.; Xu, Z.L.

    1986-01-01

    This paper reports the method of disc pressure test and the results for 21-6-9 stainless steel and medium carbon steel in hydrogen gas with different pressures and time of storage. The results show the hydrogen induced degradation of these two kinds of steel. An attempt was made to establish an index which uses variation of area of deformed disc to determine the degradation of ductility in a hydrogen environment. (orig.)

  8. Formation of genotoxic compounds by medium pressure ultra violet treatment of nitrate rich water

    NARCIS (Netherlands)

    Martijn, A.J.; Boersma, M.G.; Vervoort, Jacques; Rietjens, I.; Kruithof, J.C.

    2014-01-01

    Genotoxic compounds were produced by full-scale medium pressure (MP) ultraviolet hydrogen peroxide (UV/H2O2) treatment of nitrate-rich pretreated surface water. It was hypothesized that this formation was caused by the reaction of nitrate photolysis intermediates with natural organic matter (NOM).

  9. Hot granules medium pressure forming process of AA7075 conical parts

    Science.gov (United States)

    Dong, Guojiang; Zhao, Changcai; Peng, Yaxin; Li, Ying

    2015-05-01

    High strength aluminum alloy plate has a low elongation at room temperature, which leads to the forming of its components need a high temperature. Liquid or gas is used as the pressure-transfer medium in the existing flexible mould forming process, the heat resistance of the medium and pressurizing device makes the application of aluminum alloy plate thermoforming restricted. To solve this problem, the existing medium is replaced by the heat-resisting solid granules and the general pressure equipments are applied. Based on the pressure-transfer performance test of the solid granules medium, the feasibility that the assumption of the extended Drucker-Prager linear model can be used in the finite element analysis is proved. The constitutive equation, the yield function and the theoretical forming limit diagram(FLD) of AA7075 sheet are established. Through the finite element numerical simulation of hot granules medium pressure forming(HGMF) process, not only the influence laws of the process parameters, such as forming temperature, the blank-holder gap and the diameter of the slab, on sheet metal forming performance are discussed, but also the broken area of the forming process is analyzed and predicted, which are coincided with the technological test. The conical part whose half cone angle is 15° and relative height H/d 0 is 0.57, is formed in one process at 250°C. The HGMF process solves the problems of loading and seal in the existing flexible mould forming process and provides a novel technology for thermoforming of light alloy plate, such as magnesium alloy, aluminium alloy and titanium alloy.

  10. THE PRESSURE OF THE STAR-FORMING INTERSTELLAR MEDIUM IN COSMOLOGICAL SIMULATIONS

    International Nuclear Information System (INIS)

    Munshi, Ferah; Quinn, Thomas R.; Governato, Fabio; Christensen, Charlotte; Wadsley, James; Loebman, Sarah; Shen, Sijing

    2014-01-01

    We examine the pressure of the star-forming interstellar medium (ISM) of Milky-Way-sized disk galaxies using fully cosmological SPH+N-body, high-resolution simulations. These simulations include explicit treatment of metal-line cooling in addition to dust and self-shielding, H 2 -based star formation. The four simulated halos have masses ranging from a few times 10 10 to nearly 10 12 solar masses. Using a kinematic decomposition of these galaxies into present-day bulge and disk components, we find that the typical pressure of the star-forming ISM in the present-day bulge is higher than that in the present-day disk by an order of magnitude. We also find that the pressure of the star-forming ISM at high redshift is, on average, higher than ISM pressures at low redshift. This explains why the bulge forms at higher pressures: the disk assembles at lower redshift when the ISM exhibits lower pressure and the bulge forms at high redshift when the ISM has higher pressure. If ISM pressure and IMF variation are tied together, these results could indicate a time-dependent IMF in Milky-Way-like systems as well as a different IMF in the bulge and the disk

  11. Numerical simulation about interaction between pressure swirl spray and hot porous medium

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Zhiguo [School of Energy and Power Engineering, Dalian University of Technology, Dalian 116024 (China)], E-mail: zhzhguo1978@163.com; Xie Maozhao [School of Energy and Power Engineering, Dalian University of Technology, Dalian 116024 (China)

    2008-05-15

    To gain a deep understanding of the process of the fuel/air mixture formation and the role of the PM (porous medium) in mixture homogenization and combustion in a PM engine, the interaction of a pressure swirl spray and a hot porous medium was investigated computationally by using the modified KIVA-3V code in which an improved spray/hot wall interaction model was incorporated. The improved spray/hot wall interaction model fits into the regime above the Leidenfrost temperature, determines the properties of post-impingement fuel droplets and the quantity of heat transfer between the fuel droplets and a hot surface. An evaporating fuel spray impingement on a hot plane surface was simulated for validating the reasonability of the improved spray/hot wall interaction model. Numerical results compared well with experimental data for spray radius in the liquid and vapor phases. The linearized instability sheet atomization (LISA) model has been used to describe the atomization and breakup processes of the spray from the pressure swirl atomizers. The structure of a hot porous medium with porosity of 0.88 was established using a simple model. The injection, movement and vaporization of the fuel droplets inside the PM and their impingement on the block edges was computed. Consequently, the spatial distribution and time evolution of the temperature and fuel concentration inside the PM were obtained. The influences of the operating parameters, including ambient pressure and spray cone angle, on the characteristics of the fuel spray and mixture formation were discussed based on the numerical simulations. The basic aspects of the interaction between the pressure swirl spray and the hot porous medium have been revealed by the computational results.

  12. Flows of Carreau fluid with pressure dependent viscosity in a variable porous medium: Application of polymer melt

    Directory of Open Access Journals (Sweden)

    M.Y. Malik

    2014-06-01

    Full Text Available The present work concerns the pressure dependent viscosity in Carreau fluid through porous medium. Four different combinations of pressure dependent viscosity and pressure dependent porous medium parameters are considered for two types of flow situations namely (i Poiseuille flow and (ii Couette flow. The solutions of non-linear equations have been evaluated numerically by Shooting method along with Runge-Kutta Fehlberg method. The physical features of pertinent parameters have been discussed through graphs.

  13. Acoustic propagation operators for pressure waves on an arbitrarily curved surface in a homogeneous medium

    Science.gov (United States)

    Sun, Yimin; Verschuur, Eric; van Borselen, Roald

    2018-03-01

    The Rayleigh integral solution of the acoustic Helmholtz equation in a homogeneous medium can only be applied when the integral surface is a planar surface, while in reality almost all surfaces where pressure waves are measured exhibit some curvature. In this paper we derive a theoretically rigorous way of building propagation operators for pressure waves on an arbitrarily curved surface. Our theory is still based upon the Rayleigh integral, but it resorts to matrix inversion to overcome the limitations faced by the Rayleigh integral. Three examples are used to demonstrate the correctness of our theory - propagation of pressure waves acquired on an arbitrarily curved surface to a planar surface, on an arbitrarily curved surface to another arbitrarily curved surface, and on a spherical cap to a planar surface, and results agree well with the analytical solutions. The generalization of our method for particle velocities and the calculation cost of our method are also discussed.

  14. Capillary pressure in a porous medium with distinct pore surface and pore volume fractal dimensions.

    Science.gov (United States)

    Deinert, M R; Dathe, A; Parlange, J-Y; Cady, K B

    2008-02-01

    The relationship between capillary pressure and saturation in a porous medium often exhibits a power-law dependence. The physical basis for this relation has been substantiated by assuming that capillary pressure is directly related to the pore radius. When the pore space of a medium exhibits fractal structure this approach results in a power-law relation with an exponent of 3-D(v), where D(v) is the pore volume fractal dimension. However, larger values of the exponent than are realistically allowed by this result have long been known to occur. Using a thermodynamic formulation for equilibrium capillary pressure we show that the standard result is a special case of the more general exponent (3-D(v))(3-D(s)) where D(s) is the surface fractal dimension of the pores. The analysis reduces to the standard result when D(s)=2, indicating a Euclidean relationship between a pore's surface area and the volume it encloses, and allows for a larger value for the exponent than the standard result when D(s)>2 .

  15. Calculation of pressure and temperature in medium-voltage electrical installations due to fault arcs

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, X; Gockenbach, E [Institute of Electric Power Systems, Division of High Voltage Engineering, Leibniz University of Hanover, Hanover, 30167 Germany (Germany); Zhang, J [SIEMENS High Voltage Circuit Breaker Ltd Co., Hangzhou, 310018 (China)], E-mail: zhang@si.uni-hannover.de

    2008-05-21

    In order to determine the pressure rise due to arc faults in electrical installations, the portion of energy heating the surrounding gas of fault arcs has to be known. The ratio of the portion of energy to the electric energy, the thermal transfer coefficient, is adopted as the k{sub p} factor. This paper presents a theoretical approach for the determination of the thermal transfer coefficient and the pressure rise in electrical installations. It is based on the fundamental hydro- and thermodynamic conservation equations and the equation of gas state taking into account melting and evaporation of metals as well as chemical reactions with the surrounding gas. In order to consider the dependence of the arc energy on the gas density, the radiative effect of fault arcs on the energy balance is introduced into the arc model by using the net emission coefficient as a function of gas density, arc temperature and arc radius. The results for a test container show that factors such as the kinds of insulating gases and of electrode materials, the size of test vessels and the gas density considerably influence the thermal transfer coefficient and thus the pressure rise. Furthermore, it is demonstrated, for an example of the arc fault in a compact medium-voltage station with pressure relief openings and a pressure relief channel, that the arc energy and the arc temperature can be simulated based on the changing gas density.

  16. Medium- and high-pressure gauges and transducers produced by laser welding technology

    Science.gov (United States)

    Daurelio, Giuseppe; Nenci, Fabio; Cinquepalmi, Massimo; Chita, Giuseppe

    1998-07-01

    Industrial manufacturers produce many types of pressure gauges and transducers according to the applications, for gas or liquid, for high-medium and low pressure ranges. Nowadays the current production technology generally prefers to weld by micro TIG source the metallic corrugated membranes to the gauge or transducer bodies for the products, operating on the low pressure or medium pressure ranges. For the other ones, operating to high pressure range, generally the two components of the transducers are both threaded only and threaded and then circularly welded by micro TIG for the other higher range, till to 1000 bar. In this work the products, operating on the approximately equals 30 divided by 200 bar, are considered. These, when assembled on industrial plants, as an outcome of a non-correct operating sequence, give a 'shifted' electrical signal. This is due to a shift of the 'zero electrical signal' that unbalances the electrical bridge - thin layer sensor - that is the sensitive part of the product. Moreover, for the same problem, often some mechanical settlings of the transducer happen during the first pressure semi-components, with an increasing of the product manufacturing costs. In light of all this, the above referred, in this work the whole transducer has been re-designed according to the specific laser welding technology requirements. On the new product no threaded parts exist but only a circular laser welding with a full penetration depth about 2.5 divided by 3 mm high. Three different alloys have been tested according to the applications and the mechanical properties requested to the transducer. By using a 1.5 KW CO2 laser system many different working parameters have been evaluated for correlating laser parameters to the penetration depths, crown wides, interaction laser-materia times, mechanical and metallurgical properties. Moreover during the laser welding process the measurements of the maximum temperature, reached by the transducer top, has been

  17. Thermal fluid mixing behavior during medium break LOCA in evaluation of pressurized thermal shock

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Jae Won; Bang, Young Seok; Seul, Kwang Won; Kim, Hho Jung [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

    1998-12-31

    Thermal fluid mixing behavior during a postulated medium-size hot leg break loss of coolant accident is analyzed for the international comparative assessment study on pressurized thermal shock (PTS-ICAS) proposed by OECD-NEA. The applicability of RELAP5 code to analyze the thermal fluid mixing behavior is evaluated through a simple modeling relevant to the problem constraints. Based on the calculation result, the onset of thermal stratification is investigated using Theofanous`s empirical correlation. Sensitivity calculations using a fine node model and crossflow model are also performed to evaluate the modeling capability on multi-dimensional characteristics related to thermal fluid mixing. 6 refs., 8 figs. (Author)

  18. Optimization and Prototyping of Medium Pressure Water (MPW) Depaint Process, Tri-Service Committee on Corrosion Proceedings

    National Research Council Canada - National Science Library

    Stropki, John

    1994-01-01

    This research program was designed to evaluate the potential of a paint stripping process that utilizes a medium pressure water jet as a viable alternative to the current practice of paint stripping...

  19. Arterial and venous blood pressure and blood flow following femoral angiography with a new non-ionic contrast medium

    International Nuclear Information System (INIS)

    Nyman, U.; Almen, T.

    1978-01-01

    At femoral angiography in dogs the effects of a new non-ionic contrast medium (C29) were compared with those of one non-ionic medium (metrizamide) and one ionic medium (meglumine/sodium diatrizoate) in current use. In the leg subjected to angiography the pressure gradient over the peripheral vessels decreased and the femoral blood flow increased. The changes induced by the ionic medium were significantly greater than those induced by metrizamide and C29, whereas no significant difference between the two non-ionic media was recorded. (Auth.)

  20. Theoretical evaluation of the efficiency of gas single-stage reciprocating compressor medium pressure units

    Science.gov (United States)

    Busarov, S. S.; Vasil'ev, V. K.; Busarov, I. S.; Titov, D. S.; Panin, Ju. N.

    2017-08-01

    Developed earlier and tested in such working fluid as air, the technology of calculating the operating processes of slow-speed long-stroke reciprocating stages let the authors to obtain successful results concerning compression of gases to medium pressures in one stage. In this connection, the question of the efficiency of the application of slow-speed long-stroke stages in various fields of technology and the national economy, where the working fluid is other gas or gas mixture, is topical. The article presents the results of the efficiency evaluation of single-stage compressor units on the basis of such stages for cases when ammonia, hydrogen, helium or propane-butane mixture is used as the working fluid.

  1. UV-induced self-aggregation of E. coli after low and medium pressure ultraviolet irradiation.

    Science.gov (United States)

    Kollu, Kerim; Örmeci, Banu

    2015-07-01

    Presence of aggregated bacteria has been shown to decrease the efficacy of ultraviolet (UV) disinfection and there is some indication that UV irradiation may promote aggregation of bacteria among themselves. This study aims to provide an in-depth understanding of the effect of UV light on inducing self-aggregation of Escherichia coli bacteria by using microscopy and particle counter analysis techniques. The bacteria were observed and quantified before and after UV irradiation by employing size and concentration parameters. Four doses of low-pressure (LP) UV irradiation, 20, 40, 60 and 80 mJ/cm(2), and two doses of medium-pressure (MP) UV irradiation, 40 and 80 mJ/cm(2), were tested. At all LP UV doses tested, a significant increase in particle size was observed following UV exposure, indicating UV-induced self-aggregation. However, the magnitude of UV dose did not seem to have an impact. In the MP UV experiments, only a dose of 80 mJ/cm(2) had a significant impact on the formation of aggregates upon UV exposure. Changing the light intensity and exposure time to deliver the same LP UV dose resulted in different levels of aggregation. The results indicated that UV light intensity and wavelength may play a role in aggregation of bacteria. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Re-use of wastewater: preventing the recovery of pathogens by using medium-pressure UV lamp technology.

    Science.gov (United States)

    Kalisvaart, B F

    2004-01-01

    Ultraviolet (UV) light has become widely accepted as an alternative to chlorination or ozonation for wastewater disinfection. There are now over 2,000 wastewater treatment plants worldwide using either low- or medium-pressure UV technology. Recent studies investigating UV lamp technology, configuration, cleaning requirements and ageing, as well as long-term performance tests, have demonstrated beyond any doubt the effectiveness of UV in inactivating pathogens in wastewater. Research has also shown that, to ensure permanent inactivation and prevent the recovery of microorganisms following exposure to UV, a broad, "polychromatic" spectrum of UV wavelengths is necessary. These wavelengths inflict irreparable damage not only on cellular DNA, but on other molecules, such as enzymes, as well. Only medium-pressure UV lamps produce the necessary broad range of wavelengths; low-pressure lamps emit a single wavelength peak which only affects DNA. Polychromatic medium-pressure UV light is so effective because of the lamp's exceptionally high UV energy output at specific wavelengths across the UV spectrum. It has been shown, for example, that pathogenic E. coli O175:H7 was able to repair the damage caused by low-pressure UV, but no repair was detected following exposure to UV from medium-pressure lamps.

  3. Structural behavior of Tl-exchanged natrolite at high pressure depending on the composition of pressure-transmitting medium

    Science.gov (United States)

    Seryotkin, Yu. V.; Bakakin, V. V.; Likhacheva, A. Yu.; Dementiev, S. N.; Rashchenko, S. V.

    2017-10-01

    The structural evolution of Tl-exchanged natrolite with idealized formula Tl2[Al2Si3O10]·2H2O, compressed in penetrating (water:ethanol 1:1) and non-penetrating (paraffin) media, was studied up to 4 GPa. The presence of Tl+ with non-bonded electron lone pairs, which can be either stereo-chemically active or passive, determines distinctive features of the high-pressure behavior of the Tl-form. The effective volume of assemblages Tl+(O,H2O) n depends on the E-pairs activity: single-sided coordination correlates with smaller volumes. At ambient conditions, there are two types of Tl positions, only one of them having a nearly single-sided coordination as a characteristic of stereo-activity of the Tl+ E pair. Upon the compression in paraffin, a phase transition occurs: a 5% volume contraction of flexible natrolite framework is accompanied by the conversion of all the Tl+ cations into stereo-chemically active state with a single-sided coordination. This effect requires the reconstruction of all the extra-framework subsystems with the inversion of the cation and H2O positions. The compression in water-containing medium leads to the increase of H2O content up to three molecules pfu through the filling of partly vacant positions. This hinders a single-sided coordination of Tl ions and preserves the configuration of their ion-molecular subsystem. It is likely that the extra-framework subsystem is responsible for the super-structure modulation.

  4. Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure

    Energy Technology Data Exchange (ETDEWEB)

    Morent, Rino, E-mail: Rino.Morent@Ugent.be [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); De Geyter, Nathalie [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Trentesaux, Martine; Gengembre, Leon [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France); Dubruel, Peter [Department of Organic Chemistry, Polymer Chemistry and Biomaterials Research Group, Faculty of Sciences, Ghent University, Krijgslaan 281, 9000 Ghent (Belgium); Leys, Christophe [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Payen, Edmond [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France)

    2010-11-01

    Plasma polymerization of acrylic acid has become an interesting research subject, since these coatings are expected to be beneficial for biomedical applications due to their high surface density of carboxylic acid functional groups. However, the application of these monomers is counteracted by their low stability in humid environments, since a high stability is a required characteristic for almost any biological application. The present work investigates whether it is possible to obtain stable deposits with a high retention of carboxylic acid functions by performing plasma polymerization on polypropylene substrates with a dielectric barrier discharge operating at medium pressure. In order to obtain coatings with the desired properties, the plasma parameters need to be optimized. Therefore, in this paper, the influence of discharge power and location of the substrate in the discharge chamber is examined in detail. The properties of the deposited films are studied using contact angle measurements, X-ray photoelectron spectroscopy, atomic force microscopy and Fourier transform infrared spectroscopy. Moreover, to determine whether the obtained deposits are soluble in water, the coatings are once again analyzed after rinsing in water. This paper will clearly show that stable COOH-rich surfaces can be obtained at high discharge power and close to the monomer inlet, which might open perspectives for future biomedical applications.

  5. Evaluation of DNA damage reversal during medium-pressure UV disinfection.

    Science.gov (United States)

    Poepping, Christopher; Beck, Sara E; Wright, Harold; Linden, Karl G

    2014-06-01

    Ultraviolet (UV) disinfection relies on the principal that DNA exposure to UV irradiation leads to the formation of cytotoxic lesions resulting in the inactivation of microorganisms. Cyclobutane pyrimdine dimers (CPDs) account for the majority of DNA lesions upon UV exposure. Past research has demonstrated reversal of CPDs in extracted DNA formed at high UV-C wavelength irradiation (280 nm) upon subsequent irradiation at lower UVC wavelengths (230-240 nm). Medium-pressure (MP) UV lamps produce a polychromatic emission giving rise to the possibility that cellular DNA in a target pathogen may undergo simultaneous damage and repair when exposed to multiple wavelengths during the disinfection process, decreasing the efficiency of MP UV lamp disinfection. Culture techniques and a quantitative polymerase chain reaction (qPCR) assay were used to examine cell viability and DNA damage reversal. qPCR results indicated direct photoreversal of UV-induced DNA damage through sequential irradiations of 280 nm followed by 228 nm in Escherichia coli DNA. However, significant photoreversal was only observed after high initial doses and secondary doses of UV light. The doses where significant photoreversal took place were more than 10 times higher than those typically used in UV disinfection. Despite evidence of CPD photoreversal, bacterial growth assays showed no indication that sequential-wavelength irradiations result in higher survival rates than single-wavelength irradiations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Transport Properties of Polymer Semiconductor Controlled by Ionic Liquid as a Gate Dielectric and a Pressure Medium

    NARCIS (Netherlands)

    Shi, Wu; Ye, Jianting; Checkelsky, Joseph G.; Terakura, Chieko; Iwasa, Yoshihiro

    An effective way of using ionic liquid as a gate dielectric as well as a pressure medium to tune the transport of an exemplary polymer semiconductor, poly(2,5-bis(3-tetradecyl-thiophene-2-yl)thieno[3,2-b]thiophene) (pBTTT-C14) is presented. Working as gate dielectrics, the ionic liquids exhibit the

  7. Effect of medium-pressure UV-lamp treatment on disinfection by-products in chlorinated seawater swimming pool waters

    DEFF Research Database (Denmark)

    Cheema, Waqas Akram; Manasfi, Tarek; Kaarsholm, Kamilla Marie Speht

    2017-01-01

    experiments using a medium-pressure UV lamp. Chlorine consumption increased following post-UV chlorination, most likely because UV irradiation degraded organic matter in the pool samples to more chlorine-reactive organic matter. Haloacetic acid (HAA) concentrations decreased significantly, due to photo...

  8. Application of a support vector machine algorithm to the safety precaution technique of medium-low pressure gas regulators

    Science.gov (United States)

    Hao, Xuejun; An, Xaioran; Wu, Bo; He, Shaoping

    2018-02-01

    In the gas pipeline system, safe operation of a gas regulator determines the stability of the fuel gas supply, and the medium-low pressure gas regulator of the safety precaution system is not perfect at the present stage in the Beijing Gas Group; therefore, safety precaution technique optimization has important social and economic significance. In this paper, according to the running status of the medium-low pressure gas regulator in the SCADA system, a new method for gas regulator safety precaution based on the support vector machine (SVM) is presented. This method takes the gas regulator outlet pressure data as input variables of the SVM model, the fault categories and degree as output variables, which will effectively enhance the precaution accuracy as well as save significant manpower and material resources.

  9. The development of a neutralizing amines based reagent for maintaining the water chemistry for medium and high pressures steam boilers

    Science.gov (United States)

    Butakova, M. V.; Orlov, K. A.; Guseva, O. V.

    2017-11-01

    An overview of the development for neutralizing amine based reagent for water chemistry of steam boilers for medium and high pressures was given. Total values of the neutralization constants and the distribution coefficients of the compositions selected as a main criteria for reagent composition. Experimental results of using this new reagent for water chemistry in HRSG of power plant in oil-production company are discussed.

  10. Acidic electrolyzed water as a novel transmitting medium for high hydrostatic pressure reduction of bacterial loads on shelled fresh shrimp

    Directory of Open Access Journals (Sweden)

    Suping eDu

    2016-03-01

    Full Text Available Acidic electrolyzed water (AEW, a novel non-thermal sterilization technology, is widely used in the food industry. In this study, we firstly investigated the effect of AEW as a new pressure transmitting medium for high hydrostatic pressure (AEW-HHP processing on microorganisms inactivation on shelled fresh shrimp. The optimal conditions of AEW-HHP for Vibrio parahaemolyticus inactivation on sterile shelled fresh shrimp were obtained using response surface methodology: NaCl concentration to electrolysis 1.5 g/L, treatment pressure 400 MPa, treatment time 10 min. Under the optimal conditions mentioned above, AEW dramatically enhanced the efficiency of HHP for inactivating V. parahaemolyticus and Listeria monocytogenes on artificially contaminated shelled fresh shrimp, and the log reductions were up to 6.08 and 5.71 log10 CFU/g respectively, while the common HHP could only inactivate the two pathogens up to 4.74 and 4.31 log10 CFU/g respectively. Meanwhile, scanning electron microscopy (SEM showed the same phenomenon. For the naturally contaminated shelled fresh shrimp, AEW-HHP could also significantly reduce the micro flora when examined using plate count and PCR-DGGE. There were also no significant changes, histologically, in the muscle tissues of shrimps undergoing the AEW-HHP treatment. In summary, using AEW as a new transmitting medium for HHP processing is an innovative non thermal technology for improving the food safety of shrimp and other aquatic products.

  11. Mechanism for heating of nitrogen plasmas in an electrodeless rf capacitive discharge at medium pressures

    International Nuclear Information System (INIS)

    Berdichevskii, M.G.; Marusin, V.V.

    1979-01-01

    The possible contributions of several processes to the experimentally observed heating of nitrogen plasmas in an electarodeless rf capacitive discharge at pressures of p=2.7-67 kPa are discussed. These processes are electron-rotational, vibrational--translational (V--T), and nonresonance vibrational--vibrational (V--V) energy exchange and effects due to O 2 , H 2 O, and NO impurities in the gas. It is shown that as the pressure is decreased the heating mechanism changes from quasiequilibrium to nonequilibrium V--T heating caused by overpopulation of high vibrational levels in the ground state of the nitrogen molecule

  12. Inclusions related to catalyst and medium for transmitting pressure in diamond single crystals grown at high temperature and high pressure from the Fe-C system

    International Nuclear Information System (INIS)

    Yin Longwei; Li Musen; Hao Zhaoyin; Zhang Jiongfa

    2001-01-01

    Inclusion entrapment in a crystal is one of the most important characteristics for the crystal growth technique from solution. Diamond single crystals grown from the Fe-C system at high temperature-high pressure usually contain inclusions related to the molten catalyst and the medium (pyrophyllite) for transmitting pressure. During the growth of the diamond, the inclusions are trapped by the growth front or are formed through reaction between the contaminants trapped in the diamond. In the present article, the inclusions related to the catalyst and pyrophyllite were systemically examined by transmission electron microscopy. The chemical composition and crystal structure of the inclusions were, for the first time, determined by selected area electron diffraction pattern combined with energy dispersive x-ray spectrometry. It was shown that the inclusions are mainly composed of orthorhombic Fe 3 C, orthorhombic FeSi 2 , hexagonal SiO 2 and face-centred cubic SiC. (author)

  13. Study of discharges produced by surface waves under medium and high pressure: application to chemical analysis

    International Nuclear Information System (INIS)

    Laye epouse Granier, Agnes

    1986-01-01

    This report deals with the study of microwave discharges produced in argon gas by surface waves in the 20-760 Torr pressure range. Application to chemical analysis by emission optical spectroscopy is also investigated. First of all we study the propagation of a surface wave in a bounded plasma in which the effective collision frequency for momentum transfer ν is higher than the excitation one. The axial electron density profile is determined from two diagnostic techniques, i.e., phase variations of the wave field and Stark broadening of H β line. Then we deduce the discharge characteristics ν, θ (maintaining power of an electron-ion pair) and E eff (effective electric field for discharge sustaining) from the electron density profile. Then an energy balance of the discharge is developed. It explains the change of operating conditions in the 20-50 Torr range. At low pressure the discharge is governed by ambipolar diffusion whereas at high pressure, the electrons are mainly lost by volume recombination of Ar 2 + . Finally, we report on chemical analysis experiment of gases (optimum sensibility in found near 100 Torr) and of metallic solutions sprayed by a graphite oven. Performances of such a design and ICP plasma torches are compared. (author) [fr

  14. Requirements and Specifications for a Simplified, Low Pressure Medium Sized PWR

    International Nuclear Information System (INIS)

    Nisan, S.; Raymond, P.; Gautier, G-M.; Pignatel, J-F.

    1998-01-01

    This paper summarises part of our on-going investigations on the possible introduction of nuclear energy in developing countries or countries with low capacity electrical grids. These investigations are principally concerned with future PWR developments and basically try to search for plausible and economic answers to the three difficult questions that each nuclear technology exporting country faces today: 1)- how to compensate the apparent loss of economic competitiveness, related to the scaling effect, of a small or medium sized reactor? 2)- how to reconcile the introduction of nuclear energy on the large scale with the two major preoccupations of nuclear safety and nuclear proliferation? 3)- how to demonstrate that the proposed concept(s) can effectively meet the safety objectives of the requirements for future reactors in Europe and in other countries?

  15. Atomic hydrogen determination in medium-pressure microwave discharge hydrogen plasmas via emission actinometry

    International Nuclear Information System (INIS)

    Geng Zicai; Xu Yong; Yang Xuefeng; Wang Weiguo; Zhu Aimin

    2005-01-01

    Atomic hydrogen plays an important role in the chemical vapour deposition of functional materials, plasma etching and new approaches to the chemical synthesis of hydrogen-containing compounds. This work reports experimental determinations of atomic hydrogen in microwave discharge hydrogen plasmas formed from the TM 01 microwave mode in an ASTeX-type reactor, via optical emission spectroscopy using Ar as an actinometer. The relative intensities of the H atom Balmer lines and Ar-750.4 nm emissions as functions of input power and gas pressure have been investigated. At an input microwave power density of 13.5 W cm -3 , the approximate hydrogen dissociation fractions calculated from electron-impact excitation and quenching cross sections in the literature, decreased from ∼0.08 to ∼0.03 as the gas pressure was increased from 5 to 25 Torr. The influences of the above cross sections, and the electron and gas temperatures of the plasmas on the determination of the hydrogen dissociation fraction data have been discussed

  16. On the propagation of a quasi-static disturbance in a heterogeneous, deformable, and porous medium with pressure-dependent properties

    Energy Technology Data Exchange (ETDEWEB)

    Vasco, D.W.

    2011-10-01

    Using an asymptotic technique, valid when the medium properties are smoothly-varying, I derive a semi-analytic expression for the propagation velocity of a quasi-static disturbance traveling within a nonlinear-elastic porous medium. The phase, a function related to the propagation time, depends upon the properties of the medium, including the pressure-sensitivities of the medium parameters, and on pressure and displacement amplitude changes. Thus, the propagation velocity of a disturbance depends upon its amplitude, as might be expected for a nonlinear process. As a check, the expression for the phase function is evaluated for a poroelastic medium, when the material properties do not depend upon the fluid pressure. In that case, the travel time estimates agree with conventional analytic estimates, and with values calculated using a numerical simulator. For a medium with pressure-dependent permeability I find general agreement between the semi-analytic estimates and estimates from a numerical simulation. In this case the pressure amplitude changes are obtained from the numerical simulator.

  17. Separation of Oligosaccharides from Lotus Seeds via Medium-pressure Liquid Chromatography Coupled with ELSD and DAD

    Science.gov (United States)

    Lu, Xu; Zheng, Zhichang; Miao, Song; Li, Huang; Guo, Zebin; Zhang, Yi; Zheng, Yafeng; Zheng, Baodong; Xiao, Jianbo

    2017-03-01

    Lotus seeds were identified by the Ministry of Public Health of China as both food and medicine. One general function of lotus seeds is to improve intestinal health. However, to date, studies evaluating the relationship between bioactive compounds in lotus seeds and the physiological activity of the intestine are limited. In the present study, by using medium pressure liquid chromatography coupled with evaporative light-scattering detector and diode-array detector, five oligosaccharides were isolated and their structures were further characterized by electrospray ionization-mass spectrometry and gas chromatography-mass spectrometry. In vitro testing determined that LOS3-1 and LOS4 elicited relatively good proliferative effects on Lactobacillus delbrueckii subsp. bulgaricus. These results indicated a structure-function relationship between the physiological activity of oligosaccharides in lotus seeds and the number of probiotics applied, thus providing room for improvement of this particular feature. Intestinal probiotics may potentially become a new effective drug target for the regulation of immunity.

  18. Bromate formation from the oxidation of bromide in the UV/chlorine process with low pressure and medium pressure UV lamps.

    Science.gov (United States)

    Fang, Jingyun; Zhao, Quan; Fan, Chihhao; Shang, Chii; Fu, Yun; Zhang, Xiangru

    2017-09-01

    When a bromide-containing water is treated by the ultraviolet (UV)/chlorine process, hydroxyl radicals (HO) and halogen radicals such as Cl or Br are formed due to the UV photolysis of free halogens. These reactive species may induce the formation of bromate, which is a probable human carcinogen. Bromate formation in the UV/chlorine process using low pressure (LP) and medium pressure (MP) lamps in the presence of bromide was investigated in the present study. The UV/chlorine process significantly enhanced bromate formation as compared to dark chlorination. The bromate formation was elevated with increasing UV fluence, bromide concentration, and pH values under both LP and MP UV irradiations. It was significantly enhanced at pH 9 compared to those at pH 6 and 7 with MP UV irradiation, while it was slightly enhanced at pH 9 with LP UV. The formation by UV/chlorine process started with the formation of free bromine (HOBr/OBr - ) through the reaction of chlorine and bromide, followed by a subsequent oxidation of free bromine and formation of BrO and bromate by reacting with radicals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Tectonic origin and deformation process of the Mayer Kangri medium-high pressure metamorphic dome in Central Qiangtang of Tibet

    Science.gov (United States)

    Wang, Y.; Liang, X.

    2016-12-01

    The metamorphic characteristics, deformation process, geochronology of the medium-high pressure metamorphic rocks in blueschist bearing Central Qiangtang Metamorphic belt (CQMB) of Tibet were less well constrained. It is, however, commonly assumed that these rock slices in the margin also contain important implications on the evolution of the entire metamorphic belt. The well-exposed Mayer Kangri medium-high pressure metamorphic dome in north flank of the CQMB provides an unique opportunity to investigate the outer part of the CQMB, which could facilitate the study on the subduction-exhumation-post orogenic scenarios of the Triassic accretionary orogeny in Central Qiangtang. Field structural analyses indicate the Mayer Kangri metamorphic dome are bounded by low-angle normal faults (LANF) within the hanging wall of low-green schist facies mélange. It majorly consists of epidote-amphibolites, quartz-phengite schist, epidote-albite schist. The outcrop and micro structural observations of footwall metamorphic rocks show an open anticline with multiple foliation replacement, which largely differentiate themselves from the dextral strike-slip shearing of the hanging wall. Well-zoned amphiboles were found within the epidote-amphibolite after micro-structural observations and electron probe microanalyses (EPMA), which indicate that the amphibole zonation demonstrates a Hastingsite core, a Ferro-actinolite mantle and a Ferro-winchite rim in most cases. The mean temperature and pressure estimates of the zoned amphibolites change from 544 °, 0.98Gpa in the core, to 426°, 0.34Gpa in the mantle, and to ca.364° and 0.70 GPa in the rim. The detailed analyses on the stepwise-heating Ar-Ar results of the zoned amphiboles provide good constrains on the episodic deformation process of the CQMB. For Hast-cores, we obtained near plateau ages of 242.4-241.2 Ma, indicating the onset of the oceanic subduction is earlier than the Anisian stage of Middle Triassic. The subsequent

  20. Effect of low- and medium-pressure Hg UV irradiation on bromate removal in Advanced Reduction Process.

    Science.gov (United States)

    Jung, Bahngmi; Nicola, Rana; Batchelor, Bill; Abdel-Wahab, Ahmed

    2014-12-01

    Advanced Reduction Processes (ARP) have been developed by combining UV irradiation with reducing reagents, which produces reactive reducing free radicals that degrade contaminants (e.g. vinyl chloride, 1,2-dichloroethane, perchlorate, and bromate). This study investigates bromate destruction by ARPs using medium-pressure mercury UV light lamp (UV-M) and low-pressure mercury UV light lamp (UV-L). Effects of experimental parameters including initial bromate concentration, reducing reagent (sulfite) dose, and pH on bromate removal kinetics and quantum yield were evaluated. The pseudo-first-order rate constant (kobs) by UV-M ARP was greater by 3 times than that by UV-L ARP. UV-M and UV-L achieved a complete bromate removal of an initial concentration at 500 ppb with fluences of 10.5 J cm−2 and 73.5 J cm−2, respectively. It was found that direct photolysis is a dominant mechanism with the UV-M ARP showing that the effect of sulfite dose had no apparent influence on the bromate removal, whereas kobs was dependent on the sulfite doses in UV-L/sulfite ARP. In the presence of sulfite, kobs was affected by the solution pH in both the UV-M and UV-L ARPs. The pH effect on UV-L ARP or UV-M ARP was explained by the effect of pH on the sulfite species distribution between sulfite and bisulfite or the hydrated electrons concentrations. Also it was found that dominant reaction mechanism of bromate removal was changed by initial bromate concentrations, and its behavior was varied dependent on the UV light sources.

  1. An Effective Continuum Model for the Liquid-to-Gas Phase Change in a Porous Medium Driven by Solute Diffusion: I. Constant Pressure Decline Rates

    Energy Technology Data Exchange (ETDEWEB)

    Tsimpanogiannis, Ioannis N.; Yortsos, Yanis C.

    2001-08-15

    This report, focuses on the isothermal gas phase growth from a supersaturated, slightly compressible, binary liquid in a porous medium. This is driven by mass transfer, the extent of which is controlled by the application of either a constant-rate decline of the system pressure or the withdrawal of the liquid at a constant rate. This report deals with the first process. Pressure depletion due to constant-rate liquid withdrawal is analyzed in a companion report .

  2. Effect of medium-pressure UV-lamp treatment on disinfection by-products in chlorinated seawater swimming pool waters.

    Science.gov (United States)

    Cheema, Waqas A; Manasfi, Tarek; Kaarsholm, Kamilla M S; Andersen, Henrik R; Boudenne, Jean-Luc

    2017-12-01

    Several brominated disinfection by-products (DBPs) are formed in chlorinated seawater pools, due to the high concentration of bromide in seawater. UV irradiation is increasingly employed in freshwater pools, because UV treatment photodegrades harmful chloramines. However, in freshwater pools it has been reported that post-UV chlorination promotes the formation of other DBPs. To date, UV-based processes have not been investigated for DBPs in seawater pools. In this study, the effects of UV, followed by chlorination, on the concentration of three groups of DBPs were investigated in laboratory batch experiments using a medium-pressure UV lamp. Chlorine consumption increased following post-UV chlorination, most likely because UV irradiation degraded organic matter in the pool samples to more chlorine-reactive organic matter. Haloacetic acid (HAA) concentrations decreased significantly, due to photo-degradation, but the concentrations of trihalomethanes (THMs) and haloacetonitriles (HANs) increased with post-UV chlorination. Bromine incorporation in HAAs was significantly higher in the control samples chlorinated without UV irradiation but decreased significantly with UV treatment. Bromine incorporation was promoted in THM and HAN after UV and chlorine treatment. Overall, the accumulated bromine incorporation level in DBPs remained essentially unchanged in comparison with the control samples. Toxicity estimates increased with single-dose UV and chlorination, mainly due to increased HAN concentrations. However, brominated HANs are known in the literature to degrade following further UV treatment. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Changes in the chemical composition and spectroscopy of loblolly pine medium density fiberboard furnish as a function of age and refining pressure

    Science.gov (United States)

    Stephen S. Kelley; Thomas Elder; Leslie H. Groom

    2005-01-01

    Loblolly pine wood between the ages of 5-35 was refined into medium density fiberboard furnish at steam pressures from 2 to 18 bar, The effect of age and processing conditions on the properties of the fibers was assessed by wet chemical analyses, Near Infared Spectroscopy (NIR) and powder X-ray diffraction (XRD).In general ,the percentages of extractives and glucose...

  4. Influence of placement and height of high-rise buildings on wind pressure distribution and natural ventilation of low- and medium-rise buildings

    Czech Academy of Sciences Publication Activity Database

    Kuznetsov, Sergeii; Butova, A.; Pospíšil, Stanislav

    2016-01-01

    Roč. 15, 3/4 (2016), s. 253-266 ISSN 1473-3315 R&D Projects: GA ČR(CZ) GA14-12892S; GA MŠk(CZ) LO1219 Keywords : natural ventilation * high-rise buildings * low- and medium-rise buildings * wind pressure coefficient * wind tunnel tests Subject RIV: JM - Building Engineering Impact factor: 0.391, year: 2016 http://www.tandfonline.com/doi/full/10.1080/14733315.2016.1214396

  5. The effect of dissolution medium, rotation speed and compaction pressure on the intrinsic dissolution rate of amlodipine besylate, using the rotating disk method

    Directory of Open Access Journals (Sweden)

    Leandro Giorgetti

    2014-09-01

    Full Text Available The aim of this study was to evaluate the effect of dissolution medium, rotation speed and compaction pressure on the intrinsic dissolution rate (IDR of the antihypertensive drug amlodipine besylate, using the rotating disk method. Accordingly, a fractional factorial design (33-1 was used, employing dissolution media (water, phosphate buffer pH 6.8 and HCl 0.1 M, rotation speed (50, 75 and 100 rpm, and compaction pressure (1000, 1500 and 2000 psi as independent variables. The assays were randomized and statistically compared using the Statistica(r 11 software program. Significance testing (ANOVA indicated that the dissolution medium had a considerable impact on the IDR of amlodipine besylate. Analysis of the linear and quadratic components of the variables led to the proposition of a mathematical model that describes the IDR as a function of the parameters studied. Conversely, the levels of compaction pressure and rotation speed employed during experimental planning were less relevant, especially when the assay was conducted in the HCl 0.1 M medium.

  6. High-pressure x-ray diffraction studies of the nanostructured transparent vitroceramic medium K2O-SiO2-Ga2O3

    International Nuclear Information System (INIS)

    Lipinska-Kalita, K.E.; Chen, B.; Kruger, M.B.; Ohki, Y.; Murowchick, J.; Gogol, E.P.

    2003-01-01

    Synchrotron-radiation-based, energy-dispersive x-ray-diffraction studies have been performed on a composite containing nanometer-size aggregates embedded in an amorphous matrix, in the pressure range from ambient up to 15 GPa. The optically transparent material containing β-Ga 2 O 3 nanocrystals was developed by the controlled crystallization of a silicon oxide-based amorphous precursor. Transmission electron microscopy and conventional x-ray-diffraction techniques allowed estimating the mean size of a single-crystalline phase to be 14.8±1.9 nm, distributed homogeneously in an amorphous medium. The pressure-driven evolution of x-ray-diffraction patterns indicated a progressive densification of the nanocrystalline phase. A structural modification corresponding to a pressure-induced coordination change of the gallium atoms was evidenced by the appearance of new diffraction peaks. The overall changes of x-ray-diffraction patterns indicated a β-Ga 2 O 3 to α-Ga 2 O 3 phase transformation. The low- to high-density phase transition was initiated at around 6 GPa and not completed in the pressure range investigated. A Birch-Murnaghan fit of the unit-cell volume change as a function of pressure yielded a zero-pressure bulk modulus, K 0 , for the nanocrystalline phase of 191±4.9 GPa and its pressure derivative, K 0 ' =8.3±0.9

  7. Extraction of Kinetic Parameters for the Chemical Vapor Deposition of Polycrystalline Silicon at Medium and Low Pressures

    NARCIS (Netherlands)

    Holleman, J.; Verweij, J.F.; Verweij, Jan F.

    1993-01-01

    The deposition of silicon (Si) from silane (SiH4) was studied in the silane pressure range from 0.5 to 100 Pa (0.005 to1 mbar) and total pressure range from 10 to 1000 Pa using N2 or He as carrier gases. The two reaction paths, namely,heterogeneous and homogeneous decomposition could be separated by

  8. Cold atmospheric-pressure air plasma treatment of C6 glioma cells: effects of reactive oxygen species in the medium produced by the plasma on cell death

    Science.gov (United States)

    Wang, Yuyang; Cheng, Cheng; Gao, Peng; Li, Shaopeng; Shen, Jie; Lan, Yan; Yu, Yongqiang; Chu, Paul K.

    2017-02-01

    An atmospheric-pressure air plasma is employed to treat C6 glioma cells in vitro. To elucidate on the mechanism causing cell death and role of reactive species (RS) in the medium produced by the plasma, the concentration of the long-lived RS such as hydrogen peroxide, nitrate, and ozone in the plasma-treated liquid (phosphate-buffered saline solution) is measured. When vitamin C is added to the medium as a ROS quencher, the viability of C6 glioma cells after the plasma treatment is different from that without vitamin C. The results demonstrate that reactive oxygen species (ROS) such as H2O2, and O3 constitute the main factors for inactivation of C6 glioma cells and the reactive nitrogen species (RNS) may only play an auxiliary role in cell death.

  9. Simulation analysis of the influence of working medium pressure of dust removal system on dust deposition characteristics in butterfly valve region

    Directory of Open Access Journals (Sweden)

    Lixin WANG

    2016-08-01

    Full Text Available Dust of blast furnace gas deposits easily on the bottom of seat sealing surface of the tri-eccentric butterfly valve, which causes serious stuck and damage of the valve plate, thereby affects blast furnace product and brings great economic loss. To reduce the dust deposition, a kind of automatic dust removal system is designed and its efficacy is simulated. Based on FLUENT module of ANSYS Workbench, as well as standard k-ε turbulence model and DPM model, simulation analysis of the influence of 3 inlet pressures (0.25,0.30,0.35 of working medium (N2 in dust removal system and 2 different valve plate jaw openings (45°,90° on the dust deposition trajectory in butterfly valve region are conducted, and the influence mechanism of inlet pressure on the dust deposition is analyzed. The results show that the dust removal system can reduce the dust deposition under five combined conditions except under the condition of a valve plate jaw opening of 45°and an inlet pressure of 0.25 MPa. The dust removal system has much better effect under the following conditions: valve plate jaw opening of 45° and inlet pressure of 0.30 MPa, or valve plate jaw opening of 90° and inlet pressure of 0.25 MPa.

  10. Medium pressure boiler water chemistry optimization using neutralizing amines mixture reagent AMINAT™ PK-2 at CEPP “Borovichi Refractories Plant” of JSC “BKO”

    Science.gov (United States)

    Guseva, O. V.; Butakova, M. V.; Orlov, K. A.; Vinogradov, S. V.; Pavlenko, L. S.

    2017-11-01

    An overview of the neutralizing amine based reagent AMINAT PK-2 usage for water chemistry of steam boilers for medium pressure boiler was given. Long term experiment showed that new reagent allows to decrease corrosion rate comparing with old water chemistry based on ammonia only. Two dosage schemes in different cycle places discussed. Scheme with two points on injection showed better results. Results of corrosion rates experiments and photos of tubes inner surfaces are presented. Based on fuel savings due to reducing scale formation the total annual economy for last year was 5.1 million Russian roubles.

  11. Two-step Purification Method for Aging Pigments A2E and Iso-A2E Using Medium Pressure Liquid Chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Il; Park, Sang Cheol [Kyunghee Univ., Seoul (Korea, Republic of); Kim, So Ra; Jang, Young Pyo [Seoul National Univ., Seoul (Korea, Republic of)

    2016-09-15

    A newly modified method for the efficient purification of A2E and iso-A2E using reverse phase silica gel resin with medium pressure liquid chromatography (MPLC) was suggested. MPLC is one of the various preparative column chromatography techniques and separation under pressure renders the use of smaller particle size resins possible and increases the diversity of available stationary phases. A simplified two-step purification method was developed for the purification of aging pigments in eye, A2E and iso-A2E. With simple two-step elution of mobile phase in reverse phase MPLC, A2E and iso-A2E were successfully purified with great efficiency compare with previous column chromatography and HPLC method. This method provides more simple, convenient, cost-effective, and less time-consuming procedure for mass purification of aging pigments A2E and iso-A2E.

  12. Experimental and numerical study of heterogeneous pressure-temperature-induced lethal and sublethal injury of Lactococcus lactis in a medium scale high-pressure autoclave.

    Science.gov (United States)

    Kilimann, K V; Kitsubun, P; Delgado, A; Gänzle, M G; Chapleau, N; Le Bail, A; Hartmann, C

    2006-07-05

    The present contribution is dedicated to experimental and theoretical assessment of microbiological process heterogeneities of the high-pressure (HP) inactivation of Lactococcus lactis ssp. cremoris MG 1363. The inactivation kinetics are determined in dependence of pressure, process time, temperature and absence or presence of co-solutes in the buffer system namely 4 M sodium chloride and 1.5 M sucrose. The kinetic analysis is carried out in a 0.1-L autoclave in order to minimise thermal and convective effects. Upon these data, a deterministic inactivation model is formulated with the logistic equation. Its independent variables represent the counts of viable cells (viable but injured) and of the stress-resistant cells (viable and not injured). This model is then coupled to a thermo-fluiddynamical simulation method, high-pressure computer fluid dynamics technique (HP-CFD), which yields spatiotemporal temperature and flow fields occurring during the HP application inside any considered autoclave. Besides the thermo-fluiddynamic quantities, the coupled model predicts also the spatiotemporal distribution of both viable (VC) and stress-resistant cell counts (SRC). In order to assess the process non-uniformity of the microbial inactivation in a 3.3-L autoclave experimentally, microbial samples are placed at two distinct locations and are exposed to various process conditions. It can be shown with both, experimental and theoretical models that thermal heterogeneities induce process non-uniformities of more than one decimal power in the counts of the viable cells at the end of the treatment. (c) 2006 Wiley Periodicals, Inc.

  13. Differential effects of sporulation temperature on the high pressure resistance of Clostridium botulinum type E spores and the interconnection with sporulation medium cation contents.

    Science.gov (United States)

    Lenz, Christian A; Vogel, Rudi F

    2015-04-01

    High pressure thermal (HPT) processing can be used to improve traditional preservation methods and increase food safety and durability, whereas quality related characteristics can be largely maintained. Clostridium (C.) botulinum type E is a non-proteolytic, psychrotrophic, toxin-producing spore former, commonly associated with aquatic environments in temperate regions of the northern hemisphere. Sporulation in nature is likely to occur under varying conditions including temperature and nutrient availability, which might affect resistance properties of resulting spores. In our study, we determined the effect of sporulation temperature (13-38 °C) on the resistance of three Clostridium botulinum type E strains to differently intense HPT treatments (200 MPa at 40 and 80 °C, and 800 MPa at 40 and 80 °C). Furthermore, the effect of cations on sporulation temperature-mediated alterations in HHP resistance was investigated. Results indicate that low and high sporulation temperatures can increase and decrease sporal HPT resistance, respectively, in a treatment-dependent (pressure level, treatment temperature) manner, whereas the trends observed are largely unaffected by pressure dwells (1 s-10 min). Furthermore, results show that the cation content of the sporulation medium (Ca(2+), Mg(2+), Mn(2+)) marginally influences and partially counteracts effects on the HPT resistance of spores grown at low and elevated temperatures, respectively. This suggests that sporulation temperature and medium cations provoke changes in some common spore resistance structures. Sporulation conditions can markedly affect spore resistance properties and, thus, should be considered for the experimental setup of worst case studies aiming to evaluate the effectiveness of food processes in terms of the inactivation of C. botulinum type E spores. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Experimental study on the lightning impulse dielectric strength of liquid nitrogen insulation medium according to various pressures

    Science.gov (United States)

    Na, J. B.; Kang, H.; Chang, K. S.; Kim, Y. J.; Chu, S. Y.; Kim, T. J.; Kim, K.-J.; Lee, H. G.; Ko, T. K.

    2011-11-01

    The lightning impulse breakdown characteristics of liquid nitrogen are necessarily considered for designing high voltage superconducting machines required high reliability. This paper investigates the dielectric capability of liquid nitrogen (LN2) to withstand lightning impulse. To gain the dielectric capability of LN2 cryogenic cooling system, lightning impulse was induced in sphere-plane electrode systems which have six different diameters of sphere electrode. The pressure is one of major condition to decide dielectric strength at LN2 cryogenic cooling system. Thus, the gaseous nitrogen was injected to control pressure in the cryostat, ranging from 100 kPa to 200 kPa. Moreover, field utilization factor was calculated between sphere and plane electrode systems by a finite element method analysis. The electric field criterion of LN2 as insulation media was calculated from correlation between the experimental results and the field utilization factor. In the future, these results can be applied as the design parameter of electrical insulation for developing high voltage superconducting machines.

  15. Computational study of plasma-solid interaction in DC glow discharge in argon plasma at medium pressures

    International Nuclear Information System (INIS)

    Havlickova, E; Bartos, P; Hrach, R

    2007-01-01

    In the presented contribution two groups of techniques of computational physics-fluid modelling and non self-consistent particle technique were used to study plasma-solid interaction in argon plasma. We focused both on the physical processes taking place in the sheath at various pressures and on the problems of computational physics. The attention was given to preparation of two-dimensional fluid models with realistic assumptions about physical processes taking place in plasma during the plasma-solid interaction, further to improvement of the non self-consistent technique of particle modelling, where the external electric field was obtained either from the fluid model or directly from the trajectories of charged particles and finally to efficiency of individual algorithms

  16. Cytotoxicity of cancer HeLa cells sensitivity to normal MCF10A cells in cultivations with cell culture medium treated by microwave-excited atmospheric pressure plasmas

    Science.gov (United States)

    Takahashi, Yohei; Taki, Yusuke; Takeda, Keigo; Hashizume, Hiroshi; Tanaka, Hiromasa; Ishikawa, Kenji; Hori, Masaru

    2018-03-01

    Cytotoxic effects of human epithelial carcinoma HeLa cells sensitivity to human mammary epithelial MCF10A cells appeared in incubation with the plasma-activated medium (PAM), where the cell culture media were irradiated with the hollow-shaped contact of a continuously discharged plasma that was sustained by application of a microwave power under Ar gas flow at atmospheric pressure. The discharged plasma had an electron density of 7  ×  1014 cm-3. As the nozzle exit to the plasma source was a distance of 5 mm to the medium, concentrations of 180 µM for H2O2 and 77 µM for NO2- were generated in the PAM for 30 s irradiation, resulting in the control of irradiation periods for aqueous H2O2 with a generation rate of 6.0 µM s-1, and nitrite ion (NO2- ) with a rate of 2.2 µM s-1. Effective concentrations of H2O2 and NO2- for the antitumor effects were revealed in the microwave-excited PAM, with consideration of the complicated reactions at the plasma-liquid interfaces.

  17. Surface Treatment of PEOT/PBT (55/45 with a Dielectric Barrier Discharge in Air, Helium, Argon and Nitrogen at Medium Pressure

    Directory of Open Access Journals (Sweden)

    Pieter Cools

    2018-03-01

    Full Text Available This work describes the surface modification of 300PEO-PEOT/PBT 55/45 thin films using a medium pressure dielectric barrier discharge system operated in argon, helium, nitrogen or dry air to improve cell-surface interactions of this established biomaterial. The first part of the paper describes the optimization of the plasma processing parameters using water contact angle goniometry. The optimized samples are then characterized for changes in surface topography and surface chemical composition using atomic force microscopy (AFM and X-ray fluorescence spectroscopy (XPS respectively. For all plasma treatments, a pronounced increase in surface wettability was observed, of which the extent is dependent on the used plasma discharge gas. Except for dry air, only minor changes in surface topography were noted, while XPS confirmed that the changes in wettability were mainly chemical in nature with the incorporation of 5–10% of extra oxygen as a variety of polar groups. Similarly, for the nitrogen plasma, 3.8% of nitrogen polar groups were additionally incorporated. Human foreskin fibroblast (HFF in vitro analysis showed that within the first 24 h after cell seeding, the effects on cell-surface interactivity were highly dependent on the used discharge gas, nitrogen plasma treatment being the most efficient. Differences between untreated and plasma-treated samples were less pronounced compared to other biodegradable materials, but a positive influence on cell adhesion and proliferation was still observed.

  18. Isolation and purification of six iridoid glycosides from gardenia jasminoides fruit by medium-pressure liquid chromatography combined with macroporous resin chromatography.

    Science.gov (United States)

    Wang, Yun; Liu, Hui; Shen, Lifeng; Yao, Lan; Ma, Yinlian; Yu, Dingrong; Chen, Jianhong; Li, Puling; Chen, Ying; Zhang, Cun

    2015-12-01

    Gardeniae fructus is one of the most frequently used herbs in traditional Chinese medicine. In the present study, a process for the enrichment of six iridoid glycosides from Gardeniae fructus was developed using medium-pressure liquid chromatography combined with macroporous resin and reversed-phase chromatography. The purities of different fractions from Gardeniae fructus were assessed using quantitative high-performance liquid chromatography. After fractionation using HPD-100 column chromatography, a 30% ethanol fraction was selected based on high-performance liquid chromatography and liquid chromatography with mass spectrometry qualitative analysis to separate and purify. Based on the orientation analysis results, six compounds-deacetyl asperulosidic acid methyl ester, gardenoside, ixoroside, scandoside methyl ester, genipin-1-O-β-d-gentiobioside, and geniposide-were successfully isolated and purified in three to four combined steps from Gardeniae fructus. The purities of these compounds were found by high-performance liquid chromatography analysis to be 97.9, 98.1, 95.5, 96.3, 97.1, and 98.7%, respectively. Moreover, their structures were elucidated by NMR spectroscopy and liquid chromatography with tandem mass spectrometry. The separation process was highly efficient, rapid, and accurate, making it a potential approach for the large-scale production of iridoids in the laboratory and providing several marker compounds for quality control. This procedure may be meaningful for the purification of other natural products used in traditional Chinese medicine. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Use of ethyl lactate to extract bioactive compounds from Cytisus scoparius: Comparison of pressurized liquid extraction and medium scale ambient temperature systems.

    Science.gov (United States)

    Lores, Marta; Pájaro, Marta; Álvarez-Casas, Marta; Domínguez, Jorge; García-Jares, Carmen

    2015-08-01

    An important trend in the extraction of chemical compounds is the application of new environmentally friendly, food grade solvents. Ethyl lactate (ethyl 2-hydroxypropanoate), produced by fermentation of carbohydrates, is miscible with both hydrophilic and hydrophobic compounds being a potentially good solvent for bioactive compounds. Despite its relatively wide use as a general solvent, the utilization of ethyl lactate as an extraction solvent has only recently been considered. Here, we evaluate the possible use of ethyl lactate to extract phenolic compounds from wild plants belonging to Cytisus scoparius, and we compare the characteristics of the extracts obtained by Pressurized Solvent Extraction (the total phenolics content, the antioxidant activity and the concentration of the major polyphenols) with those of other extracts obtained with methanol. In order to explore the industrial production of the ethyl lactate Cytisus extract, we also evaluate medium scale ambient temperature setups. The whole plant and the different parts (flowers, branches, and seed pods) were evaluated separately as potential sources of polyphenols. All extracts were analyzed by LC-MS/MS for accurate identification of the major polyphenols. Similar phenolic profiles were obtained when using ethyl lactate or methanol. The main bioactives found in the Cytisus extract were the non-flavonoid phenolic compounds caffeic and protocatechuic acids and 3,4-dihydroxybenzaldehyde; the flavonoids rutin, kaempferol and quercetin; the flavones chrysin, orientin and apigenin; and the alkaloid lupanine. Regarding the comparison of the extraction systems, although the performance of the PLE was much better than that of the ambient-temperature columns, the energy consumption was also much higher. Ethyl lactate has resulted an efficient extraction solvent for polyphenols from C. scoparius, yielding extracts with high levels of plant phenolics and antioxidant activity. The antimicrobial activity of these

  20. Incidence of the geometric parameters and of flow in the primary ventilation rate and of carbon monoxide emissions in burning atmospherics of medium and high pressure

    International Nuclear Information System (INIS)

    Amell A, Andres; Hernandez V, Jaime; Cortes T, Jaime

    2000-01-01

    In this kind of atmospheric burners, high-pressure gas supply and Venturi geometry guarantee a good primary air entrance for combustion. In this project we analyze the most important burner geometric parameters (outlet diameter, injection diameter and mixer geometry) and gas flux conditions (supply pressure) that have an influence over primary aeration rate. The results of this investigation will contribute with the methodology design improvement, focused to use this kind of burners in our country

  1. Experimental analysis on pressure drop and heat transfer of a terminal fan-coil unit with ice slurry as cooling medium

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Seara, Jose; Diz, Ruben; Uhia, Francisco J.; Dopazo, J. Alberto [Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, University of Vigo, Campus Lagoas-Marcosende No 9, 36310 Vigo (Spain)

    2010-09-15

    This paper is concerned with the experimental analysis of a standard terminal fan-coil unit with ice slurry as coolant. The ice slurry was produced from an ethylene glycol 10 wt% aqueous solution. The pressure drop measurements are presented as a function of volumetric flow rate, ice concentration and Reynolds number. The experimental friction factors are obtained and discussed. The fan-coil capacity was experimentally determined for chilled water and melting ice slurry with inlet ice fractions around 5, 10, 15 and 20 wt%, considering in each case three different fan rotation velocities. The fan-coil capacity is higher with melting ice slurry than with chilled water by factors between 3.7 and 4.9. The heat transfer analysis realizes that the air side thermal resistance controls the heat transfer process. Experimental results for the melt off rate of ice in the fan coil and the superheating at the fan-coil outlet are shown and discussed. (author)

  2. Temperature, pressure, and density of electron, atom and ion, in the breaking arc of silver-cadmium contacts used in medium current region

    International Nuclear Information System (INIS)

    Aida, Teizo

    1979-01-01

    Wear of silver-cadmium contacts at the time of breaking was studied. The materials of the contacts were silver-cadmium alloy and silver-cadmium oxide sinter. The spectra of arc discharge generated at the time of breaking contact were analyzed with a monochromator photo multiplier. The ratio of the densities of cadmium and silver atoms in the arc can be estimated from the observed intensities of spectrum lines. The electron density is obtained from the arc current density. The proportion of the cadmium atoms in the arc was about 30 percent. The densities of silver atoms and cadmium atoms can be estimated by the principle of thermal ionization equilibrium. The ion densities were also estimated. The partial pressures of silver and cadmium atoms in the arc can be obtained from the Boyle-Charles' law. A formula which gives the number of atoms liberated from the surfaces of contacts at the time of breaking was given by Boddy et al. (Kato, T.)

  3. Steam gasification of coal at low-medium (600-800{sup o}C) temperature with simultaneous CO{sub 2} capture in fluidized bed at atmospheric pressure: The effect of inorganic species. 1. Literature review and comments

    Energy Technology Data Exchange (ETDEWEB)

    Corella, J.; Toledo, J.M.; Molina, G. [Universidad Complutense de Madrid, Madrid (Spain). Dept. for Chemical Engineering

    2006-08-30

    This paper addresses the H{sub 2} production with simultaneous CO{sub 2} capture by steam gasification of coal in a fluidized bed, at low/medium temperatures (600-800{sup o}C) and atmospheric pressure. This work is mainly aimed at reviewing the effects of the inorganic species present in the matrix of the coal or added to the gasifier bed. The most promising species seems to be the calcined limestone (CaO), which intervenes in the overall gasification reaction network in at least five different types of reactions. The effectiveness of the CaO for CO{sub 2} capture in the coal gasifier is, therefore, affected/influenced by the other four simultaneous or competitive types of reactions in the gasifier. The effects of the temperature in the gasifier and of the (CaO/coal) ratio fed to the gasifier are finally reviewed and discussed in detail.

  4. Effect of sporulation medium and its divalent cation content on the heat and high pressure resistance of Clostridium botulinum type E spores.

    Science.gov (United States)

    Lenz, Christian A; Vogel, Rudi F

    2014-12-01

    Clostridium (C.) botulinum type E belongs to the non-proteolytic physiological C. botulinum group II and produces the highly potent Botulinum neurotoxin E (BoNT/E) even at refrigerated temperatures. As C. botulinum type E spores are highly prevalent in aquatic environments, seafood and fishery products are commonly associated with this organism. Hydrostatic high pressure (HHP) treatments, or treatments combining HHP with elevated temperatures (HHPT), can be used to improve traditional preservation methods and increase food safety, quality and durability. In this study, we assessed the effect of different sporulation media and cation concentration on the heat resistance, HHP resistance, and HHPT resistance of spores from three C. botulinum type E strains. SFE (sediment fish extract) sporulation media yielded the most resistant spores, whereas, in M140 media, the least resistant spores were produced. Furthermore our results indicate that the divalent cation content (Ca(2+), Mg(2+) and Mn(2+)) plays a role in the differential development of C. botulinum type E spore resistance to heat, HHP and HHPT in different media. Calcium cations confer heat and HPPT resistance to spores, while high amounts of magnesium cations appear to have a negative effect. Manganese cations in low concentrations are important for the development resistance to HPP and HPPT treatments, but not heat alone. This study provides valuable information on the nature of non-proteolytic C. botulinum type E spores grown in different media. The data provided here can be useful to the food industry and to researchers when considering spore properties in food safety risk assessment and the experimental design of future inactivation studies. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Steam gasification of coal at low-medium (600-800{sup o}C) temperature with simultaneous CO{sub 2} capture in a bubbling fluidized bed at atmospheric pressure. 2. Results and recommendations for scaling up

    Energy Technology Data Exchange (ETDEWEB)

    Corella, J.; Toledo, J.M.; Molina, G. [Universidad Complutense de Madrid, Madrid (Spain). Dept. of Chemical Engineering

    2008-03-19

    A gasification gas with an H{sub 2} content as high as 80 vol %, dry basis has been obtained by gasification of coal with pure steam at 600-800{sup o}C. The gasifier used was an atmospheric and bubbling fluidized bed operating with CaO in the bed as the CO{sub 2} sorbent. The research was carried out at a small pilot plant scale with continuous feeding of coal and batch mode introduction of the CaO. The gas composition and gas quality (tar content) is given for the following variables of operation: (a) type of in-bed sorbent used, (b) the amount of CaO in the bed related to the amount of coal fed, (c) temperature in the gasifier bed, (d) weight hourly space velocity (h{sup -1}) of the coal in the gasifier, and (e) time(-on-stream). To capture CaO at atmospheric pressure, the gasification with in-bed CaO had to be carried out at low-medium (600-800{sup o}C) gasification temperatures. For this reason, the tar content in the gasification gas was high (up to 52 g/Nm{sup 3}), which lowered the value of the H{sub 2}-rich gasification raw gas. It is demonstrated that a gas rich in H{sub 2} (80 vol % H{sub 2}, dry basis), and with very low CO{sub 2} and tar contents, can be obtained only if the coal gasification, at atmospheric pressure and with pure steam, is carried out at (CaO/coal) ratios above 10-15.

  6. One-step separation and purification of three lignans and one flavonol from Sinopodophyllum emodi by medium-pressure liquid chromatography and high-speed counter-current chromatography.

    Science.gov (United States)

    Wang, Ping; Liu, Yongling; Chen, Tao; Xu, Wenhua; You, Jinmao; Liu, Yongjun; Li, Yulin

    2013-01-01

    Lignans and flavonols are the primary constituents of Sinopodophyllum emodi and have been used as cathartic, anthelmintic, chemotherapeutic and anti-hypertensive compounds. Although these compounds have been isolated, there have been no reports on the separation of 4'-demethyl podophyllotoxin, podophyllotoxin, deoxypodophyllotoxin and kaempferol in one step by medium-pressure liquid chromatography (MPLC) and high-speed counter-current chromatography (HSCCC). Development of an efficient method for the preparative separation and purification of three lignans and one flavonol from S. emodi. The precipitate of crude extracts was first separated by MPLC into four parts, numbered GJ-1, GJ-2, GJ-3 and GJ-4. GJ-1 was separated and purified by HSCCC using a solvent system composed of n-hexane:ethyl acetate:methanol:water (1.75:1.5:1:0.75, v/v/v/v). The purities of the target compounds were assessed using high-performance liquid chromatography (HPLC) and chemical structures were identified by (1) H-NMR and (13) C-NMR. The HSCCC and MPLC methods were successfully used for the preparative separation and purification of 4'-demethyl podophyllotoxin (8.5 mg, 92.4%), podophyllotoxin (40.1 mg, 92.1%), deoxypodophyllotoxin (4.6 mg, 98.1%), and kaempferol (1.6 mg, 96.7%) from a 100 mg sample. Three lignans (4'-demethyl podophyllotoxin, podophyllotoxin, deoxypodophyllotoxin) and one flavonol (kaempferol) were successfully isolated by HSCCC and MPLC in one step. Copyright © 2013 John Wiley & Sons, Ltd.

  7. Flowing afterglow selected ion flow tube (FA-SIFT) study of ion/molecule reactions in support of the detection of biogenic alcohols by medium-pressure chemical ionization mass spectrometry techniques

    Science.gov (United States)

    Dhooghe, F.; Amelynck, C.; Rimetz-Planchon, J.; Schoon, N.; Vanhaecke, F.

    2009-08-01

    This article deals with the validation of and first measurements with a newly constructed flowing afterglow selected ion flow tube (FA-SIFT) instrument. All reactions were studied in He buffer gas at a pressure of 1.43 hPa and a temperature of 298 K. The validation consisted of the study of the gas-phase ion/molecule reactions of methanol and ethanol (M) with the reactant ions H3O+.(H2O)n (n = 0-3), MH+, M2H+, and MH+.H2O and the reactions of MH+ with H2O. Obtained results are compared with available literature data and with calculated collision rate constants. The validated FA-SIFT has subsequently been used to characterize the reactions of the unsaturated biogenic alcohols 2-methyl-3-buten-2-ol, 1-penten-3-ol, cis-3-hexen-1-ol and trans-2-hexen-1-ol (ROH) with H3O+.(H2O)n (n = 0-3) as well as the secondary reactions of the H3O+/ROH product ions with H2O (hydration) and ROH in view of their accurate quantification in ambient air samples with medium-pressure chemical ionization mass spectrometry (CIMS) instrumentation using H3O+ reactant ions. Whereas water elimination following proton transfer was found to be the main mechanism for all H3O+/ROH reactions studied and for the H3O+.H2O/trans-2-hexen-1-ol reaction, all other H3O+.(H2O)n/ROH (n = 1, 2) reactions proceeded by multiple reaction mechanisms. H3O+.(H2O)3 reactions proceeded mainly (C6 alcohols) or exclusively (C5 alcohols) by ligand switching followed by water elimination. Hydration of the H3O+/ROH product ions was observed whenever they contained oxygen. The secondary reactions with ROH were also found to proceed by multiple reaction pathways.

  8. Probing the local interstellar medium

    International Nuclear Information System (INIS)

    Suess, S.T.; Dessler, A.J.

    1985-01-01

    The paper concerns the location of the heliospheric shock, in view of the discrepancy between the theoretical and experimental values. To determine whether the discrepancy may be attributed to parameters used to describe the local interstellar medium [LISM], the authors applied a sophisticated model of solar-wind expansion to deduce a range of parameters for the LISM. Both the interstellar magnetic field and the pressure due to galactic cosmic rays are considered. (U.K.)

  9. Hadrons in medium

    Indian Academy of Sciences (India)

    medium properties of hadrons. I discuss the relevant symmetries of QCD and how they might affect the observed hadron properties. I then discuss at length the observable consequences of in-medium changes of hadronic properties in reactions with ...

  10. Medium is the message

    NARCIS (Netherlands)

    Kuipers, G.; Ritzer, G.

    2012-01-01

    "The medium is the message" is a phrase coined by Canadian media theorist Marshall McLuhan (1911-1980), in his book Understanding Media: The Extensions of Man (1964). In this book, McLuhan examines the impact of media on societies and human relations, arguing for the primacy of the medium -

  11. Local interstellar medium

    International Nuclear Information System (INIS)

    Crutcher, R.M.; and Radio Astronomy Laboratory, University of California, Berkeley)

    1982-01-01

    Analysis of the velocities of optical interstellar lines shows that the Sun is immersed in a coherently moving local interstellar medium whose velocity vector agrees with that of the interstellar wind observed through backscatter of solar H Lyα and He lambda584 photons. The local interstellar medium consists of both cool clouds and warm intercloud medium gas, has a mass of perhaps approx.30 M/sub sun/, does not have severe depletion of trace elements from the gas phase, and appears to be material which has been shocked and accelerated by stellar winds and supernovae associated with the Sco-Oph OB association

  12. HIRENASD medium unstructured

    Data.gov (United States)

    National Aeronautics and Space Administration — Unstructured HIRENASD mesh: - medium size (16 million nodes, 39 million elements) - for node centered solvers - 31.05.2011 - caution: dimensions in mm

  13. Concept medium programme

    DEFF Research Database (Denmark)

    Bjerrum, Peter

    2005-01-01

    The present essay is an attempt to determine the architectural project of the 21st century in relation to a modern conception of space as the medium of architecture, and of sociality as its program...

  14. Concept medium programme

    DEFF Research Database (Denmark)

    Bjerrum, Peter

    2005-01-01

    The present essay is an attempt to determine the architectural project of the 21st century in relation to a modern conception of space as the medium of architecture, and of sociality as its program......The present essay is an attempt to determine the architectural project of the 21st century in relation to a modern conception of space as the medium of architecture, and of sociality as its program...

  15. Defined medium for Moraxella bovis.

    OpenAIRE

    Juni, E; Heym, G A

    1986-01-01

    A defined medium (medium MB) for Moraxella bovis was formulated. Nineteen strains grew well on medium MB. One strain was auxotrophic for asparagine, and another was auxotrophic for methionine. Strains of M. equi and M. lacunata also grew on medium MB. All strains had an absolute requirement for thiamine and were stimulated by or actually required the other growth factors in the medium.

  16. Spiegel. Medium. Kunst

    DEFF Research Database (Denmark)

    Kacunko, Slavko

    and cultural perspective. From 1800 on, the great incentive was to push forward the material-physical and optical-mechanical and especially the media ‘exploitation’ of the mirror. The significance of the mirror as a central meta-medium of the visual emerged in a particularly striking way in the late 1830s....... That ricochets through media theory, theories of art and culture and through cultural historiography. A repository is one thing, a transmitter another: the distinction will act crucially on the quest for appropriate perspectives and classifications of what in terms of disciplines would rather appear...... or as synaesthesia gone mute. It stands in contrast with the mirror, which assumes the status of a medium facility or meta-medium of visual transference, encountering its only medial and operative limitation within the analogue or digital repository media. The present proposal for an artistic and cultural history...

  17. Concept medium program

    DEFF Research Database (Denmark)

    Bjerrum, Peter

    2003-01-01

    The present essays is an attempt to dertermine the architecural project of the 21st century in realation to a modern conception of space as the medium of architecture, and of society as its program. This attempt adopts the internal point of view of an architect in describing a modern architectura...

  18. Radon in geological medium

    International Nuclear Information System (INIS)

    Hricko, J.

    1995-01-01

    The paper presented deals with behavior of the radon in geological medium and with some results of the radon survey in Bratislava and Kosice regions. 1) The a v has been detected in the holes 0.80 m deep. The density of observations - 3 reference areas (one represents 20 stations) per 1 km 2 . The radon risk maps in 1:25000 and 1:50000 scales have been compiled. The 56.8% of the project area lies in low radon risk, 37.6% in medium radon risk and 5.6% in high radon risk. Follow-up monitoring of the equivalent volume radon activity (EVRA) at the flats, located in the areas with high radon risk of the surface layer, has showed values several times higher than Slovak limits (Marianka, Raca, Vajnory). The evidence that neotectonic is excellent medium for rising up emanation to the subsurface layer, is shown on the map. The tectonic zone of Liscie udolie in Bratislava-Karlova Ves area has been clearly detected by profile radon survey (a v > 50 kBq/m 3 ). 2) At present, northern half of the area of Kosice in question was covered by radon survey. The low and medium radon risks have been observed here, while localities with high radon risk are small in extent. The part of radon risk and soil permeability map from northern Kosice area is shown. (J.K.) 3 figs., 2 refs

  19. Contrast medium extravasation in intravenous urography

    Energy Technology Data Exchange (ETDEWEB)

    Tosch, U.; Becker-Gaab, C.; Hahn, D.

    1984-09-01

    Aetiology and diagnostic procedure of calyceal fornix rupture during intravenous urography are discussed. In the literature the fornix rupture is discribed as a spontaneous event - not so in the four cases presented. In two cases a sudden increase in intrapelvic pressure was due to an ureteric calculus, in the other cases an obstruction of the ureter was secondary to neoplasm. It is recommended to perform a CT as soon as a contrast medium extravasation in intravenous urography is diagnosed.

  20. Medium-energy physics

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    One of the basic challenges of medium-energy physics is the development of a clear picure of the manner in which pions propagate in nuclear matter. Since the pion is a basic quantum of the nuclear force, understanding its propagation in nuclei contributes to our understanding of the basic nature of nuclear forces. Key to such understanding is a comprehensive and precise experimental description of pion interactions both with complex nuclei and few nucleon systems. This is a major objective of the ANL effort in medium-energy physics. Experiments are carried out as a part of a comprehensive nuclear program, and, because of this perspective, the pion studies are expected to give new insights into the nature of nuclear forces. At the present time, almost all experimental activity is concentrated on measurements using various pion beams of the Los Alamos Meson Physics Facility

  1. Liquid chromatographic extraction medium

    Science.gov (United States)

    Horwitz, E. Philip; Dietz, Mark L.

    1994-01-01

    A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

  2. Hadrons in the medium

    International Nuclear Information System (INIS)

    Leupold, Stefan

    2005-01-01

    QCD, the theory of the strong interaction, has a non-trivial vacuum structure. One way to characterize this structure is by means of non-vanishing matrix elements of quark or gluon operators, the condensates. In hot and/or dense enough strongly interacting media, QCD is subject to phase transitions or rapid crossovers. Consequently, the condensates typically change with density and temperature. An exciting aspect of hadron physics is the question how these changes affect the properties of hadrons which are put in a strongly interacting environment. Here vector mesons deserve special attention as they couple directly to (virtual) photons. The latter can decay into dileptons which leave the strongly interacting system untouched. Via that process information about possible in-medium modifications of the vector mesons can be carried to the detectors. With the ω-meson as an example I will review our current understanding of the connections between in-medium changes of condensates and the in-medium changes of the properties of hadrons. (author)

  3. Medium-size nuclear plants

    International Nuclear Information System (INIS)

    Vogelweith, L.; Lavergne, J.C.; Martinot, G.; Weiss, A.

    1977-01-01

    CEA (TECHNICATOME) has developed a range of pressurized water reactors of the type ''CAS compact'' which are adapted to civil ship propulsion, or to electric power production, combined possibly with heat production, up to outputs equivalent to 125 MWe. Nuclear plants equipped with these reactors are suitable to medium-size electric networks. Among the possible realizations, two types of plants are mentioned as examples: 1) Floating electron-nuclear plants; and 2) Combined electric power and desalting plants. The report describes the design characteristics of the different parts of a 125 MWe unit floating electro-nuclear plant: nuclear steam system CAS 3 G, power generating plant, floating platform for the whole plant. The report gives attention to the different possibilities according to site conditions (the plant can be kept floating, in a natural or artificial basin, it can be put aground, ...) and to safety and environment factors. Such unit can be used in places where there is a growing demand in electric power and fresh water. The report describes how the reactor, the power generating plant and multiflash distillation units of an electric power-desalting plant can be combined: choice of the ratio water output/electric power output, thermal cycle combination, choice of the gain ratio, according to economic considerations, and to desired goal of water output. The report analyses also some technical options, such as: choice of the extraction point of steam used as heat supply of the desalting station (bleeding a condensation turbine, or recovering steam at the exhaust of a backpressure turbine), design making the system safe. Lastly, economic considerations are dealt with: combining the production of fresh water and electric power provides usually a much better energy balance and a lower cost for both products. Examples are given of some types of installations which combine medium-size reactors with fresh water stations yielding from 10000 to 120000 m 3 per day

  4. Modelagem das perdas de água por evaporação e arraste em aspersores de média pressão Modeling of evaporation and wind drift losses in medium-pressure sprinklers

    Directory of Open Access Journals (Sweden)

    Samuel Beskow

    2011-03-01

    Full Text Available Neste estudo se avaliou a capacidade preditiva de cinco modelos empíricos visando estimar as perdas de água por evaporação e arraste dos aspersores Agropolo/NY (bocal 3,5 mm e Naan/5024 (bocal 3,0 mm; para cada aspersor foram ajustados modelos específicos. Por meio de comparação entre resultados de distribuição de água medidos em ensaios de campo e resultados simulados com os modelos propostos por Yazar (1984, Trimmer (1987, Seginer et al. (1991, Tarjuelo et al. (2000 e Playán et al. (2005 foi possível concluir que os diferentes modelos considerados apresentaram índices de desempenho classificado como Péssimo ou, no máximo, Sofrível. Comparados com os cinco modelos empíricos considerados, os novos modelos ajustados apresentaram menores erros, qualificando-se para serem utilizados com índices de desempenho classificado como Bom e Muito Bom, indicando que a aplicação de modelos empíricos deve ser limitada ás condições operacionais (diâmetro de bocal, pressão de operação, etc. similares áquelas em que os modelos foram desenvolvidos.Five empirical models were evaluated with respect to their ability to estimate evaporation and wind drift losses of Agropolo/NY (nozzle 3.5 mm and Naan/5024 (nozzle 3.0 mm sprinklers, and other specific models were developed for each sprinkler model. By comparing measured results, which were obtained in field trials, with simulated ones (models of Yazar, 1984; Trimmer, 1987; Seginer et al., 1991; Tarjuelo et al., 2000; and Playán et al., 2005, these models were classified as very bad or poor according to the index of performance. However, the new adjusted models presented lower errors, resulting in indexes of performance classified as good and very good, thus indicating that their application must be limited to operational conditions (nozzle size, operational pressure, etc. similar to those in which they were developed.

  5. Spiegel. Medium. Kunst

    DEFF Research Database (Denmark)

    Kacunko, Slavko

    to human talent, came the millennia of untiring labours and the play of art and science and thought. The human love-affair with reflection (to cite Mark Pendergast’s subtitle - Mirror/Mirror: A History of the Human Love Affair with Reflection [New York 2003]) has always been a platonic one and I hold...... and cultural perspective. From 1800 on, the great incentive was to push forward the material-physical and optical-mechanical and especially the media ‘exploitation’ of the mirror. The significance of the mirror as a central meta-medium of the visual emerged in a particularly striking way in the late 1830s...

  6. DENSE MEDIUM CYCLONE OPTIMIZATON

    Energy Technology Data Exchange (ETDEWEB)

    Gerald H. Luttrell; Chris J. Barbee; Peter J. Bethell; Chris J. Wood

    2005-06-30

    Dense medium cyclones (DMCs) are known to be efficient, high-tonnage devices suitable for upgrading particles in the 50 to 0.5 mm size range. This versatile separator, which uses centrifugal forces to enhance the separation of fine particles that cannot be upgraded in static dense medium separators, can be found in most modern coal plants and in a variety of mineral plants treating iron ore, dolomite, diamonds, potash and lead-zinc ores. Due to the high tonnage, a small increase in DMC efficiency can have a large impact on plant profitability. Unfortunately, the knowledge base required to properly design and operate DMCs has been seriously eroded during the past several decades. In an attempt to correct this problem, a set of engineering tools have been developed to allow producers to improve the efficiency of their DMC circuits. These tools include (1) low-cost density tracers that can be used by plant operators to rapidly assess DMC performance, (2) mathematical process models that can be used to predict the influence of changes in operating and design variables on DMC performance, and (3) an expert advisor system that provides plant operators with a user-friendly interface for evaluating, optimizing and trouble-shooting DMC circuits. The field data required to develop these tools was collected by conducting detailed sampling and evaluation programs at several industrial plant sites. These data were used to demonstrate the technical, economic and environmental benefits that can be realized through the application of these engineering tools.

  7. Plasma properties and atomic processes at medium and high pressures

    International Nuclear Information System (INIS)

    Drawin, H.W.

    1979-01-01

    When the state of a plasma deviates from local thermodynamic equilibrium (L.T.E.) the equilibrium relations cannot be applied. The thermodynamic properties must then be described on the basis of models in which the individual atomic properties and elementary reactions intervene. The first part of the paper gives a schematic description of a plasma suffering power input, power losses and external constraints in the form of initial and boundary conditions. The rate equations for particle density, momentum and energy of open systems are summarized, including nuclear reactions. The second part gives a review of the progress made in understanding the properties of special types of non-L.T.E. plasmas such as glow discharge plasmas, negative ion plasmas (with application to the physics of SF 6 circuit-breakers) and Tokamak plasmas on the basis of these rate equations

  8. Photodegradation of sulphadimethoxine in water by medium pressure UV lamp.

    Science.gov (United States)

    Lester, Y; Gozlan, I; Avisar, D; Mamane, H

    2008-01-01

    The photodegradation rate of sulphadimethoxine (SMT) in water was studied under polychromatic UV light, in a bench scale apparatus. SMT photolysis was carried out at pH levels of 2.5, 6.5 and 10 to study the impact of acid base properties on the degradation of SMT. The highest SMT photolysis fluence based rate was found at pH=2.5 (k=7.22x10(-4) cm2/mJ) and the lowest rate at pH=10 (k=4.72x10(-4) cm2/mJ), thus the reaction rate decreases with an increase in pH between pH values of 2.5-10. Results indicated that direct photolysis is not satisfactory for degradation of SMT by polychromatic UV lamp as a fluence of approximately 7,000 mJ/cm2 is needed to break down 99% of SMT at pH 6.5. The photodegradation products of SMT were studied at various pH values. Photodegradation of SMT results in dissimilar relative amounts of intermediates formed at different pH values which may exert a photon demand and impact on SMT photodegradation rate. Copyright IWA Publishing 2008.

  9. Combustion for Enhanced Recovery of Light Oil at Medium Pressures

    NARCIS (Netherlands)

    Khoshnevis Gargar, N.

    2014-01-01

    Using conventional production methods, recovery percentages from oil reservoirs range from 5% for difficult oil to 50% for light oil in highly permeable homogeneous reservoirs. To increase the oil recovery factor, enhanced oil recovery (EOR) methods are used. We distinguish EOR that uses chemical

  10. A porous medium approach for the fluid structure interaction modelling of a water pressurized nuclear reactor core fuel assemblies: simulation and experimentation; Une approche milieu poreux pour la modeisation de l'interaction fluide-structure des assemblages combustibles dans un coeur de reacteur a eau pressurisee: simulation et experimentation

    Energy Technology Data Exchange (ETDEWEB)

    Ricciardi, G.

    2008-10-15

    The designing of a pressurized water reactor core subjected to seismic loading, is a major concern of the nuclear industry. We propose, in this PhD report, to establish the global behaviour equations of the core, in term of a porous medium. Local equations of fluid and structure are space averaged on a control volume, thus we define an equivalent fluid and an equivalent structure, of which unknowns are defined on the whole space. The non-linear fuel assemblies behaviour is modelled by a visco-elastic constitutive law. The fluid-structure coupling is accounted for by a body force, the expression of that force is based on empirical formula of fluid forces acting on a tube subject to an axial flow. The resulting equations are solved using a finite element method. A validation of the model, on three experimental device, is proposed. The first one presents two fuel assemblies subjected to axial flow. One of the two fuel assemblies is deviated from its position of equilibrium and released, while the other is at rest. The second one presents a six assemblies row, immersed in water, placed on a shaking table that can simulate seismic loading. Finally, the last one presents nine fuel assemblies network, arranged in a three by three, subject to an axial flow. The displacement of the central fuel assembly is imposed. The simulations are in agreement with the experiments, the model reproduces the influence of the flow of fluid on the dynamics and coupling of the fuel assemblies. (author)

  11. Fluid-Driven Deformation of a Soft Porous Medium

    Science.gov (United States)

    Lutz, Tyler; Wilen, Larry; Wettlaufer, John

    2017-11-01

    Viscous drag forces resisting the flow of fluid through a soft porous medium are maintained by restoring forces associated with deformations in the solid matrix. We describe experimental measurements of the deformation of foam under a pressure-driven flow of water along a single axis. Image analysis techniques allow tracking of the foam displacement while pressure sensors allow measurement of the fluid pressure. Experiments are performed for a series of different pressure heads ranging from 10 to 90 psi, and the results are compared to theory. This work builds on previous measurements of the fluid-induced deformation of a bed of soft hydrogel spheres. Compared to the hydrogel system, foams have the advantage that the constituents of the porous medium do not rearrange during an experiment, but they have the disadvantage of having a high friction coefficient with any boundaries. We detail strategies to characterize and mitigate the effects of friction on the observed foam deformations.

  12. Barometric Pumping of a Fractured Porous Medium

    Science.gov (United States)

    Adler, P. M.; Mourzenko, V.; Thovert, J. F.; Pili, E.; Guillon, S.

    2014-12-01

    Fluctuations in the ambient atmospheric pressure result in motion of air in porous fractured media. This mechanism, known as barometric pumping, efficiently transports gaseous species through the vadose zone to the atmosphere. This is of interest in fields, such as transport of trace gases from soil to atmosphere, remediation of contaminated sites, radon in buildings, leakage from carbon sequestration sites and detection of nuclear explosions. The fractures are modeled as polygonal plane surfaces with a given transmissivity embedded in a permeable matrix. The slightly compressible fluid obeys Darcy's law in these two media with exchanges between them. The solute obeys convection-diffusion equations in both media again with exchanges. The fractures and the porous medium are meshed by triangles and tetrahedra, respectively. The equations are discretized by the finite volume method. A Flux Limiting Scheme diminishes numerical dispersion ; the solute transfer between the fractures and the porous medium is precisely evaluated. The resulting equations are solved by conjugate gradient algorithms. This model is applied to the Roselend Natural Laboratory. At a 55 m depth, a sealed cavity allows for gas release experiments across fractured porous rocks in the unsaturated zone. The fractures are hexagons with a radius of 5m; their density is larger than 2.4 10-3 m-3; the aperture is about 0.5 mm. The pressure fluctuations are sinusoidal, of amplitude 0.01 bar and period 1 week. The solute concentration is equal to 1 at the bottom. Systematic results will be presented. First, the precision of the calculations is assessed. Second, the pressure and solute concentration fields are displayed and discussed. Third, the influence of the major parameters (fracture density, aperture, porosity, diffusion coefficient,…) is illustrated and discussed. These results are discussed in terms of the amplification of solute transfer to the ground surface by the pressure fluctuations.

  13. Optical pressure/density measuring means

    Science.gov (United States)

    Veligdan, J.T.

    1995-05-09

    An apparatus and method are disclosed for rapidly and accurately determining the pressure of a fluid medium in either a static or dynamic state. The pressure is determined by making a measurement of the velocity of a light beam that is directed through the fluid medium along a pathway that enables an integrated pressure measurement to be made along the pathway, rather than making such a measurement only at a single point in the medium. A HeNe laser is configured to emit a beam of two frequencies separated by about 2 MHz. One of these beam frequencies is directed through the fluid medium and is reflected back through the medium to a non-linear diode detector. The other beam frequency is passed directly to a diode detector without traversing said medium. The diode detector is operated to determine the frequency shift or beat frequency between the two beam frequencies. Any variation in the frequency of said reflected beam that is caused by a change in its velocity as it is passed through the fluid medium causes a change in the beat frequency. This beat frequency change is then converted to an output signal value corresponding to the pressure of the medium. The measurement instrument apparatus is remotely positioned relative to the medium being measured, thus the apparatus is immune from electro-magnetic interference and can operate in conditions of high radiation, corrosion and extraordinarily high temperature. 4 figs.

  14. Dynamical Model about Rumor Spreading with Medium

    Directory of Open Access Journals (Sweden)

    Xiaxia Zhao

    2013-01-01

    Full Text Available Rumor is a kind of social remark, that is untrue, and not be confirmed, and spreads on a large scale in a short time. Usually, it can induce a cloud of pressure, anxiety, and panic. Traditionally, it is propagated by word of mouth. Nowadays, with the emergence of the internet, rumors can be spread by instant messengers, emails, or publishing. With this new pattern of spreading, an ISRW dynamical model considering the medium as a subclass is established. Beside the dynamical analysis of the model, we mainly explore the mechanism of spreading of individuals-to-individuals and medium-to-individual. By numerical simulation, we find that if we want to control the rumor spreading, it will not only need to control the rate of change of the spreader subclass, but also need to control the change of the information about rumor in medium which has larger influence. Moreover, to control the effusion of rumor is more important than deleting existing information about rumor. On the one hand, government should enhance the management of internet. On the other hand, relevant legal institutions for punishing the rumor creator and spreader on internet who can be tracked should be established. Using this way, involved authorities can propose efficient measures to control the rumor spreading to keep the stabilization of society and development of economy.

  15. Activation of cyclopentane in aqueous medium and at room ...

    African Journals Online (AJOL)

    In this study, the use of a transition metal complex, tris (2,2-bipyridine) ruthenium (II) as a photosensitizer to convert cyclopentane into other compounds in an aqueous medium and at room temperature and pressure has been investigated. Peroxydisulphate ion has been used as a radical source. The irradiation of the ...

  16. Pions in the nuclear medium

    International Nuclear Information System (INIS)

    Chanfray, G.

    1996-07-01

    We discuss various aspects of pion physics in the nuclear medium. We first study s-wave pion-nucleus interaction in connection with chiral symmetry restoration and quark condensate in the nuclear medium. We then address the question of p-wave pion-nucleus interaction and collective pionic modes in nuclei and draw the consequences for in medium ππ correlations especially in the scalar-isoscalar channel. We finally discuss the modification of the rho meson mass spectrum at finite density and/or temperature in connection with relativistic heavy ion collisions

  17. Differential Medium for Vibrio cholerae

    Science.gov (United States)

    Schrank, Gordon D.; Stager, Charles E.; Verwey, W. F.

    1973-01-01

    A differential medium designed for rapid presumptive identification of Vibrio cholerae was described and shown to be useful for enumeration of viable cholera vibrios in the presence of other intestinal bacteria. Images PMID:4764406

  18. Pressure Sores

    Science.gov (United States)

    Pressure sores are areas of damaged skin caused by staying in one position for too long. They ... wheelchair, or are unable to change your position. Pressure sores can cause serious infections, some of which ...

  19. Medium effects in direct reactions

    International Nuclear Information System (INIS)

    Karakoc, M; Bertulani, C

    2013-01-01

    We discuss medium corrections of the nucleon-nucleon (NN) cross sections and their influence on direct reactions at intermediate energies ≳50 MeV/nucleon. The results obtained with free NN cross sections are compared with those obtained with a geometrical treatment of Pauli-blocking and Dirac-Bruecker methods. We show that medium corrections may lead to sizable modifications for collisions at intermediate energies and that they are more pronounced in reactions involving weakly bound nuclei.

  20. Pressure Controller

    Science.gov (United States)

    1981-01-01

    EPIC is Electronic Pressure Indicating Controller produced by North American Manufacturing Company. It is a high-sensitivity device for improving combustion efficiency in industrial furnaces that interprets a signal from a pressure transducer on a furnace and regulates furnace pressure accordingly. A controller can provide savings of from five to 25 percent of an industrial user's annual furnace fuel bill.

  1. Intracranial Pressure

    DEFF Research Database (Denmark)

    Hvedstrup, Jeppe; Radojicic, Aleksandra; Moudrous, Walid

    2018-01-01

    OBJECTIVE: To compare a new method of noninvasive intracranial pressure (nICP) measurement with conventional lumbar puncture (LP) opening pressure. METHODS: In a prospective multicenter study, patients undergoing LP for diagnostic purposes underwent intracranial pressure measurements with HeadSen...

  2. Chemistry of the interstellar medium

    International Nuclear Information System (INIS)

    Umanskij, S.Ya.

    1979-01-01

    Some aspects of chemistry of interstellar gas-dust clouds are considered. The specific attention is paid to the molecule formation in the interstellar medium. Discussed are the process of hydrogen atom recombination on interstellar specks of dust as well as the formation of double-atom molecules. An ion-molecular mechanism plays the main role in the origination of multiatom molecules. It is noted, that the real progress in chemistry of the interstellar medium will be determined by the development of laboratory investigations at ultralow temperatures and study of the processes proceeding on solid surfaces

  3. Micropropagation of dahlia in static liquid medium using slow-release tools of medium ingredients

    NARCIS (Netherlands)

    Klerk, de G.J.M.; Brugge, ter J.

    2011-01-01

    Growth of dahlia shoots in vitro was ca. 4 times faster in liquid medium than on solidified medium. In liquid standard medium (3% sucrose, macroelements according to Driver–Kuniyuki Walnut medium, microelements according to Murashige–Skoog medium, 0.44 µM benzylaminopurine), the major medium

  4. Pressure ulcers.

    Science.gov (United States)

    Reddy, Madhuri

    2011-04-28

    Unrelieved pressure or friction of the skin, particularly over bony prominences, can lead to pressure ulcers in up to one third of people in hospitals or community care, and one fifth of nursing home residents. Pressure ulcers are more likely in people with reduced mobility and poor skin condition, such as older people or those with vascular disease. We conducted a systematic review and aimed to answer the following clinical questions: What are the effects of preventive interventions in people at risk of developing pressure ulcers? What are the effects of treatments in people with pressure ulcers? We searched: Medline, Embase, The Cochrane Library, and other important databases up to June 2010 (Clinical Evidence reviews are updated periodically, please check our website for the most up-to-date version of this review). We included harms alerts from relevant organisations such as the US Food and Drug Administration (FDA) and the UK Medicines and Healthcare products Regulatory Agency (MHRA). We found 64 systematic reviews, RCTs, or observational studies that met our inclusion criteria. We performed a GRADE evaluation of the quality of evidence for interventions. In this systematic review we present information relating to the effectiveness and safety of the following interventions: air-filled vinyl boots, air-fluidised supports, alternating-pressure surfaces (including mattresses), alternative foam mattresses, constant low-pressure supports, debridement, electric profiling beds, electrotherapy, hydrocellular heel supports, low-air-loss beds (including hydrotherapy beds), low-level laser therapy, low-tech constant-low-pressure supports, medical sheepskin overlays, nutritional supplements, orthopaedic wool padding, pressure-relieving overlays on operating tables, pressure-relieving surfaces, repositioning (regular "turning"), seat cushions, standard beds, standard care, standard foam mattresses, standard tables, surgery, therapeutic ultrasound, topical lotions and

  5. Animal Locomotion in Different Mediums

    Indian Academy of Sciences (India)

    Wetlands are repositories of unique biodiversity. Wetlandorganisms are well adapted to their habitat, lying at theinterface of aquatic and terrestrial environments. In order tounderstand their adaptations in a better way, it is essential tograsp the basic properties of the medium in which variousorganisms live. This is attempted ...

  6. Animal Locomotion in Different Mediums

    Indian Academy of Sciences (India)

    IAS Admin

    Fishes, moving in water encounter drag forces, which can be of considerable magnitude. If sudden movement is required to catch prey or escape predators in a viscous medium, it is only possible by the contraction of fast, white muscle fibres, which rely on anaerobic glycolysis pathways. Therefore, it is not surprising that.

  7. Molecular spectroscopy of interstellar medium

    International Nuclear Information System (INIS)

    Varshalovich, D.A.; Khersonskij, V.K.

    1980-01-01

    Experimental data obtained in the investigation into molecules of interstellar medium by molecular-spectroscopic methods are discussed generally. Ion-molecule reactions play a significant part in the formation of multiatom molecules in the interstellar medium as well as reactions proceeding on the surface of interstellar dust. More than 50 types of molecules have been detected in the interstellar medium at present. In a wide range of wave lengths over 500 spectral lines belonging to various molecules and molecular fragments have been recorded. Interstellar molecules permit to investigate interstellar gas from all the sides. They are a suitable indicator of the isotope composition of interstellar gas. Radio observations of interstellar molecules make it possible to effectively investigate kinematics and space structure both separate gas-dust complexes and total gas distribution in Galaxy. It is noted that achievements of molecular spectroscopy of the interstellar medium radically change representations of the chemical composition of interstellar gas, of isotope abundance and organic substance in the Universe

  8. Hadron photoproduction at medium energy

    International Nuclear Information System (INIS)

    Dainton, J.B.

    1985-04-01

    Results from measurements of multibody photoproduction at medium incident photon energy (2.8 to 4.8 GeV) are presented and discussed. Particular emphasis is placed on topics which are not well understood and which therefore motivate experiments with the upgraded electron accelerator and storage ring ELSA at the University of Bonn, FR Germany. (author)

  9. Conventional high pressure techniques fro neutron diffraction

    International Nuclear Information System (INIS)

    Mizuki, Jun-ichiro; Endoh, Yasuo

    1981-01-01

    Conventional high pressure techniques using a clamped type pressure cell have been adapted for studies by neutron diffraction. Careful calibration of the pressure sensing apparatus and an appropriate choice of pressure transmitting medium enable accurate neutron diffraction measurements to be made at reduced temperature as low as 4 K. In the present studies we have demonstrated that using the clamped type microbomb neutron diffraction measurements can be easily made under the pressure up to 5 kbar within the temperature range 4 K - 350 K. (author)

  10. Estimation of turgor pressure through comparison between single plant cell and pressurized shell mechanics

    Science.gov (United States)

    Durand-Smet, P.; Gauquelin, E.; Chastrette, N.; Boudaoud, A.; Asnacios, A.

    2017-10-01

    While plant growth is well known to rely on turgor pressure, it is challenging to quantify the contribution of turgor pressure to plant cell rheology. Here we used a custom-made micro-rheometer to quantify the viscoelastic behavior of isolated plant cells while varying their internal turgor pressure. To get insight into how plant cells adapt their internal pressure to the osmolarity of their medium, we compared the mechanical behavior of single plant cells to that of a simple, passive, pressurized shell: a soccer ball. While both systems exhibited the same qualitative behavior, a simple mechanical model allowed us to quantify turgor pressure regulation at the single cell scale.

  11. Development of a high-efficiency, high-performance air filter medium

    International Nuclear Information System (INIS)

    Bergman, W.; Sawyer, S.R.

    1988-01-01

    A unique high-efficiency particulate air (HEPA) filter medium has been developed for applications in high temperature and high pressure environments. This filter medium is a composite made from quartz and stainless-steel fibers that have been sintered together. The composite medium has the same efficiency and pressure drop as standard HEPA glass media, but has four times the tensile strength and can operate continuously at temperatures up to 500/degree/C. In a conventional HEPA, the binder burns out above 250/degree/C and the medium loses its strength; our composite filter medium has no comparable loss of strength even at 500/degree/C. 8 refs., 8 figs., 1 tab

  12. Dry chips versus green chips as furnish for medium-density fiberboard

    Science.gov (United States)

    Paul H. Short; George E. Woodson; Duane E. Lyon

    1978-01-01

    The fiber characteristics and the physical and mechanical properties of medium-density fiberboard (MDF), manufactured with pressure-refined fiber from green and partially dried raw material, were analyzed to determine if dry wood chips made a better furnish than green wood chips. Pressure-refining dry material produced coarser fiber than those obtained from green...

  13. Properties of medium-density fiberboard produced in an oil-heated laboratory press

    Science.gov (United States)

    O. Suchsland; G.E. Woodson

    1976-01-01

    Medium-density fiberboards from pressurized double-disk refined fibers have a close correlation between layer density and layer dynamic modulus of elasticity. Density distribution over the thickness was readily controlled by manipulating platen temperature and applied pressure. Thus, overall modulus of elasticity could be adjusted. In contrast to modulus of elasticity...

  14. Medium modifications with recoil polarization

    Energy Technology Data Exchange (ETDEWEB)

    Brand, J.F.J. van den [Nationaal Instituut voor Kernfysica en Hoge Energiefysica, Amsterdam (Netherlands); Ent, R. [CEBAF, Newport News, VA (United States)

    1994-04-01

    The authors show that the virtual Compton scattering process allows for a precise study of the off-shell electron-nucleon vertex. In a separable model, they show the sensitivity to new unconstrained structure functions of the nucleon, beyond the usual Dirac and Pauli form factors. In addition, they show the sensitivity to bound nucleon form factors using the reaction 4He({rvec e},e{prime},{rvec p}){sup 3}H. A nucleon embedded in a nucleus represents a complex system. Firstly, the bound nucleon is necessarily off-shell and in principle a complete understanding of the dynamical structure of the nucleon is required in order to calculate its off-shell electromagnetic interaction. Secondly, one faces the possibility of genuine medium effects, such as for example quark-exchange contributions. Furthermore, the electromagnetic coupling to the bound nucleon is dependent on the nuclear dynamics through the self-energy of the nucleon in the nuclear medium.

  15. Medium modifications with recoil polarization

    International Nuclear Information System (INIS)

    Brand, J.F.J. van den; Ent, R.

    1994-01-01

    The authors show that the virtual Compton scattering process allows for a precise study of the off-shell electron-nucleon vertex. In a separable model, they show the sensitivity to new unconstrained structure functions of the nucleon, beyond the usual Dirac and Pauli form factors. In addition, they show the sensitivity to bound nucleon form factors using the reaction 4He(rvec e,e',rvec p) 3 H. A nucleon embedded in a nucleus represents a complex system. Firstly, the bound nucleon is necessarily off-shell and in principle a complete understanding of the dynamical structure of the nucleon is required in order to calculate its off-shell electromagnetic interaction. Secondly, one faces the possibility of genuine medium effects, such as for example quark-exchange contributions. Furthermore, the electromagnetic coupling to the bound nucleon is dependent on the nuclear dynamics through the self-energy of the nucleon in the nuclear medium

  16. Pressure Drop

    Science.gov (United States)

    Lawson, Mike

    2010-01-01

    Mike Lawson briefly discussed pressure drop for aerospace applications and presented short stories about adventures experienced while working at NASA and General Dynamics, including exposure to technologies like the Crew and Equipment Translation Aid (CETA) cart and the SWME.

  17. Medium Theory and Social Systems

    DEFF Research Database (Denmark)

    Tække, Jesper

    The  paper  first  gives  a  tentative  theoretical  explanation  of  the  concept  of media,  based  on  the  dichotomies  of  actual/potential  (meaning),  form/medium  (appearance),  and  substratum/material  content  (extension  in  time  and  space).  This  theoretical  explanation  presents......  seen as medium  for  formation. Finally  the  paper  takes  the micro  level  perspective  by  applying  the  theory  to  newsgroups,  interpreting  them as self-organizing interactive systems giving a differentiated and diversified scope for social  inclusion.  ......The  paper  first  gives  a  tentative  theoretical  explanation  of  the  concept  of media,  based  on  the  dichotomies  of  actual/potential  (meaning),  form/medium  (appearance),  and  substratum/material  content  (extension  in  time  and  space).  This  theoretical  explanation  presents......  the  possibility  for  observation both of a social micro and a social macro level from a medium perspective. In the next  section  the paper  frames  the macro  level by  a  tentative  synthesis of  the medium  theory  and  the  sociological systems theory briefly describing a socio...

  18. High Pressure Treatment in Foods

    Directory of Open Access Journals (Sweden)

    Edwin Fabian Torres Bello

    2014-08-01

    Full Text Available High hydrostatic pressure (HHP, a non-thermal technology, which typically uses water as a pressure transfer medium, is characterized by a minimal impact on food characteristics (sensory, nutritional, and functional. Today, this technology, present in many food companies, can effectively inactivate bacterial cells and many enzymes. All this makes HHP very attractive, with very good acceptance by consumers, who value the organoleptic characteristics of products processed by this non-thermal food preservation technology because they associate these products with fresh-like. On the other hand, this technology reduces the need for non-natural synthetic additives of low consumer acceptance.

  19. Intermolecular Interactions at high pressure

    DEFF Research Database (Denmark)

    Eikeland, Espen Zink

    2016-01-01

    transmitting medium. Through careful structural analysis combined with theoretical calculations, the structures of all the new high-pressure phases identified herein were determined. In the hydroquinone - methanol and hydroquinone - acetonitrile clathrate structures the phase transitions break the host...... illustrates how important it is to quantify all intermolecular interactions in structures. This enables researchers to see a more complete picture and not focus only on a few interactions deemed particularly important....

  20. Development of brachytherapy medium doserate

    International Nuclear Information System (INIS)

    Atang Susila; Ari Satmoko; Ahmad Rifai; Kristiyanti

    2010-01-01

    Brachytherapy has proven to be an effective treatment for different types of cancers and it become a common treatment modality in most radiotherapy clinics. PRPN has had experience in development of Low Dose Rate Brachytherapy for cervix cancer treatment. However the treatment process using LDR device needs 5 hours in time that the patient feel uncomfort. Therefore PRPN develops Medium Dose Rate Brachytherapy with radiation activity not more than 5 Currie. The project is divided into two stages. Purchasing of TPS software and TDS design are held in 2010, and the construction will be in 2011. (author)

  1. A Heterogeneous Medium Analytical Benchmark

    International Nuclear Information System (INIS)

    Ganapol, B.D.

    1999-01-01

    A benchmark, called benchmark BLUE, has been developed for one-group neutral particle (neutron or photon) transport in a one-dimensional sub-critical heterogeneous plane parallel medium with surface illumination. General anisotropic scattering is accommodated through the Green's Function Method (GFM). Numerical Fourier transform inversion is used to generate the required Green's functions which are kernels to coupled integral equations that give the exiting angular fluxes. The interior scalar flux is then obtained through quadrature. A compound iterative procedure for quadrature order and slab surface source convergence provides highly accurate benchmark qualities (4- to 5- places of accuracy) results

  2. Charmed hadrons in nuclear medium

    International Nuclear Information System (INIS)

    Tolos, L.; Gamermann, D.; Molina, R.; Nieves, J.; Oset, E.; Garcia-Recio, C.; Ramos, A.

    2010-01-01

    We study the properties of charmed hadrons in dense matter within a coupled-channel approach which accounts for Pauli blocking effects and meson self-energies in a self-consistent manner. We analyze the behaviour in this dense environment of dynamically-generated baryonic resonances as well as the open-charm meson spectral functions. We discuss the implications of the in-medium properties of open-charm mesons on the D s0 (2317) and the predicted X(3700) scalar resonances. (authors)

  3. Organic electronics based pressure sensor towards intracranial pressure monitoring

    Science.gov (United States)

    Rai, Pratyush; Varadan, Vijay K.

    2010-04-01

    The intra-cranial space, which houses the brain, contains cerebrospinal fluid (CSF) that acts as a fluid suspension medium for the brain. The CSF is always in circulation, is secreted in the cranium and is drained out through ducts called epidural veins. The venous drainage system has inherent resistance to the flow. Pressure is developed inside the cranium, which is similar to a rigid compartment. Normally a pressure of 5-15 mm Hg, in excess of atmospheric pressure, is observed at different locations inside the cranium. Increase in Intra-Cranial Pressure (ICP) can be caused by change in CSF volume caused by cerebral tumors, meningitis, by edema of a head injury or diseases related to cerebral atrophy. Hence, efficient ways of monitoring ICP need to be developed. A sensor system and monitoring scheme has been discussed here. The system architecture consists of a membrane less piezoelectric pressure sensitive element, organic thin film transistor (OTFT) based signal transduction, and signal telemetry. The components were fabricated on flexible substrate and have been assembled using flip-chip packaging technology. Material science and fabrication processes, subjective to the device performance, have been discussed. Capability of the device in detecting pressure variation, within the ICP pressure range, is investigated and applicability of measurement scheme to medical conditions has been argued for. Also, applications of such a sensor-OTFT assembly for logic sensor switching and patient specific-secure monitoring system have been discussed.

  4. Saliva as a diagnostic medium.

    Science.gov (United States)

    Pink, Richard; Simek, Jiri; Vondrakova, Jana; Faber, Edgar; Michl, Petr; Pazdera, Jindrich; Indrak, Karel

    2009-06-01

    This is a review of current knowledge on the use of saliva, gingival cervical fluid and mucosal transudate in the detection of some oral and systemic diseases as well as drugs. Oral fluid is a diagnostic medium that can be easily collected and with minimal invasion but it has been neglected in the past. Today, saliva is being used more often to diagnose: HIV virus, oro-facial and systemic tumors, cardiovascular disease and in detecting addictive substances. Neutropil levels in saliva may also indicate successful bone marrow transplant. Oral fluid is now systematically being researched and oral fluid analysis is being compared with the analysis of other diagnostic media such as blood and urine. A number of recent studies have focused on oncogenic marker detection and its monitoring in saliva. The latest clinical and laboratory findings on diagnostic markers of oropharyngeal carcinoma in oral fluid could be the beginning of their wider use as a diagnostic medium. Oral fluid can also be also used to diagnose other malignancies such as breast cancer which was one of the first malignant tumors to be detected using genetic protein biomarkers. Raised levels of CA15-3 and the epidermal growth factor (EGF) receptor have been found in patients with breast cancer and elevated levels of CA 125 and the glycoprotein complex in the saliva of ovarian cancer patients. Doubtless, the diagnostic value of saliva, aided by current technological development will increase rapidly in the near future.

  5. Unsaturated medium hydrocarbons pollution evaluation

    International Nuclear Information System (INIS)

    Di Luise, G.

    1991-01-01

    When the so called porous unsaturated medium, that's the vertical subsoil section between both the ground and water-table level, is interested by a hydrocarbons spill, the problem to evaluate the pollution becomes difficult: considering, essentially, the natural coexistence in it of two fluids, air and water, and the interactions between them. This paper reports that the problems tend to increase when a third fluid, the pollutant, immiscible with water, is introduced into the medium: a three-phases flow, which presents several analogies with the flow conditions present in an oil-reservoir, will be established. In such a situation, it would be very useful to handle the matter by the commonly used parameters in the oil reservoirs studies such as: residual saturation, relative permeability, phases mobility, to derive a first semiquantitative estimation of the pollution. The subsoil pollution form hydrocarbons agents is one of the worldwide more diffused causes of contamination: such events are generally referable to two main effects: accidental (oil pipeline breakdowns, e.g.), and continuous (underground tanks breaks, industrial plants leakages, e.g.)

  6. NEW RSW & Wall Medium Fully Tetrahedral Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — New Medium Fully Tetrahedral RSW Grid with viscous wind tunnel wall at the root. This grid is for a node-based unstructured solver. Medium Tet: Quad Surface Faces= 0...

  7. Coal char oxidation kinetics in air medium

    Directory of Open Access Journals (Sweden)

    Korotkikh Alexander G.

    2017-01-01

    Full Text Available Study of oxidation kinetics for three types of coal char with different carbon content in air is presented. The coal char powders of anthracite, bituminous T-grade coal and 2B-grade lignite with particle size less than 80 μm were tested. The coal char oxidation was researched by isothermal method via simultaneous TG-DSC analyzer Netzsch STA 449 Jupiter F3 in the temperature range of 1000–1200 °C. Measurements were carried out at ambient pressure. Volumetric flow rate of oxidizing medium into analyser chamber was 250 ml/min. Flow consisted of air and argon with volumetric ratio 24/1. Carbon average rate of oxidation reaction at each temperature were defined based on experimental results. Kinetic constants (the frequency factor and activation energy were defined for Arrhenius equation modified with three submodels: volumetric model, shrinking core model and random pore model. The activation energy values for anthracite are 1,6-1,7 times higher than for chars of bituminous coal and lignite.

  8. Mapping of moveout in a TTI medium

    KAUST Repository

    Stovas, A.

    2012-01-01

    To compute moveout in a transversely isotropic medium with tilted symmetry axis is a very complicated problem. We propose to split this problem into two parts. First, to compute the moveout in a corresponding VTI medium. Second, to map the computed moveout to a TTI medium.

  9. 27 CFR 19.914 - Medium plants.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Medium plants. 19.914... OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Distilled Spirits For Fuel Use Permits § 19.914 Medium plants. Any person wishing to establish a medium plant shall make application for and obtain in...

  10. Optimization of medium composition for apple rootstocks

    African Journals Online (AJOL)

    User

    2011-05-02

    May 2, 2011 ... work of MS medium was also empirical and was deve- loped to optimise the mineral composition of the medium for growth of tobacco callus. A subsequent development such as Woody Plant Medium (WPM) (Lloyd and. McCown, 1981) was based on this previous process. 6-Benzylaminopurine (BA) and ...

  11. Conceptual design of small and medium power reactors

    International Nuclear Information System (INIS)

    Miki, Minoru; Horiuchi, Tetsuo; Akita, Minoru; Niino, Tsuyoshi.

    1988-01-01

    Under the circumstance that with the slowdown of the growth of electric power demand, the forecast of the demand becomes difficult, as the plants that can delicately respond to the short term change of the demand regardless of the size of electric power networks, the expectation to small and medium nuclear power plants becomes high. The target was set to combine with ABWRs based on the technical progress of BWRs, to assume the output of 600 MW and 300 MW as the series of capacity, how to maintain and improve the economical efficiency while reducing to the medium and small types, and what peculiar characteristics small and medium nuclear reactors can have, and the development of the design concept was carried out. At the time of the development, the LWR technology that has been fostered so far is to beutilized up to the maximum limit, the economical efficiency is to be ensured by simplifying the facilities, and the safety is to be heightened by utilizing the characteristics peculiar to small reactors. As the results, the design concept of medium and small LWRs was established, which have such features as natural circulation type core using short fuel, natural heat dissipation type containment vessel, pressure-accumulating injection system, compact building with a few stories, and the possibility of continuous operation for two years. (Kako, I.)

  12. Tattoo: a multifaceted medium of communication

    Directory of Open Access Journals (Sweden)

    Christian Wymann

    2010-11-01

    Full Text Available This article suggests the systems theoretical distinction of form/medium as a useful tool for distinguishing social phenomena that might look as if they stem from the same process. This is shown to be the case for the tattoo and tattooing. The tattoo is conceived as a medium of communication through which different forms of communication emerge. Tattooing is one of these forms of communication that shapes the medium in a particular way. The current article sheds a special light on its intricate, communicational constellation, for which the concept of parallax is suggested. Law, medicine and cosmetics as other forms of communication use the medium of tattoo in their own way as well. The form/medium distinction allows us to grasp these different forms of communication, while it shows that they share the tattoo as medium. The article’s ultimate goal is to illustrate that the tattoo figures as a multifaceted medium of communication.

  13. HYDROGENATION OF 4-OXOISOPHORONE OVER PD/AL2/O2 CATALYST UNDER SUPERCRITICAL CO2 MEDIUM

    Science.gov (United States)

    Hydrogenation of 4-oxoisophorone has been studied over 1% Pd/Al2O3 impregnated catalyst in supercritical CO2 medium at different reaction conditions. The effect of temperature, pressure and reaction medium on the conversion and product selectivity is discussed. Phase behavior stu...

  14. Medium-Based Design: Extending a Medium to Create an Exploratory Learning Environment

    Science.gov (United States)

    Rick, Jochen; Lamberty, K. K.

    2005-01-01

    This article introduces "medium-based" design -- an approach to creating "exploratory learning environments" using the method of "extending a medium". First, the characteristics of exploratory learning environments and medium-based design are described and grounded in related work. Particular attention is given to "extending a medium" --…

  15. Merger of waste in kaolin panels medium density

    International Nuclear Information System (INIS)

    Bezerra, A.F.C.; Santana, L.N.L.; Neves, G.A.

    2011-01-01

    Medium-density panels are molded under pressure and temperature and have physical and mechanical properties similar to those of solid wood. Their composition involves fibers of eucalyptus and pine, but other residues as kaolin waste can be incorporated. The objective was to manufacture medium density panels incorporating kaolin waste and compare the physical, chemical and mechanical properties of these with other commercials. The residue was subjected to the following characterization tests: X-ray diffraction, chemical analysis, differential thermal analysis, thermal gravimetric analysis and size analysis.Through the process of pressing the samples were prepared, they were evaluated for their flexural strength and tensile strength perpendicular to the water absorption / swelling in thickness, density and moisture content. According to the analyzed results, we conclude that samples having the residue had lower levels of swelling, tensile and flexural strength and higher levels of absorption.(author)

  16. Dreams of a New Medium

    Directory of Open Access Journals (Sweden)

    Aden Evens

    2009-01-01

    Full Text Available Problematic at best, the desire for a transparent interface nevertheless drives much of digital culture and technology. But not the Web; or at least, not Web 1.0. Thoroughly commercialized, comfortably parsed into genres, serving billions of pages of predigested content to passive consumers, the World Wide Web as developed in the '90s unabashedly embraces its role as medium. While so many digital technologies work to hide their mediacy--drawing in the user with a total simulated sensorium, dematerializing the resistances of size and weight, untangling the knots of cables tying user to machine and machine to cubicle, minimizing the interface--Web 1.0 proudly clings to the browser as a glaring reminder of its medial character. While Web 2.0 has not forsaken the browser altogether, it nevertheless seems to offer a different sort of mediation. Arising alongside the atomization of browser functions, the ubiquitization of connectivity, and the coincidence of producer and user, Web 2.0 retains the form of a medium while reaching for the experiential logic of immediacy. This is not the immediacy of the transparent interface; rather, Web 2.0 effects an immediate relationship between the individual and culture. The interface does not disappear, but its mediacy is subsumed under the general form of cultural participation. Focusing on the "version upgrade" from Web 1.0 to 2.0, this essay will explore the implications for mediacy of this transition, noting that the fantasy of immediacy which drives Web 2.0 is layered and complex. The typical account of immediacy proposes to eliminate the interface and so construct a virtual reality (VR. But Web 2.0 mostly sidesteps the virtual, propelled instead by a fantasy of intuition in which the Web already knows what you want because it is you. Crucially, fantasies about the digital are effective: the computer's futurity inhabits our world, finding its expression in politics, advertising, budgeting, strategic planning

  17. Blood Pressure Test

    Science.gov (United States)

    ... pressure monitors may have some limitations. Tracking your blood pressure readings It can be helpful in diagnosing or ... more Stage 2 high blood pressure (hypertension) Elevated blood pressure and stages 1 and 2 high blood pressure ( ...

  18. Unreddened stars and the two-phase model of the interstellar medium

    International Nuclear Information System (INIS)

    Joshi, P.; Tarafdar, S.P.

    1977-01-01

    Two phase models have been computed of the interstellar medium, with cosmic rays and X-rays assumed to be the main ionizing agents, heating due to photoelectron ejection from the interstellar grains. It is shown that it is possible to have a hot and tenuous intercloud medium in pressure equilibrium with the interstellar clouds for a wide range of physical conditions, possibly existing in the interstellar space. The atomic and ionic line observations towards lambda Sco are shown to be consistent with the origin of these lines in the intercloud medium for a range of values of the ionizing flux. It is suggested that the intercloud medium may be predominantly neutral, with ionization rates consistent with the limits imposed by molecular observations. The mean fractional ionization of the intercloud medium is approximately 1%. (Auth.)

  19. Dust in the interplanetary medium

    Energy Technology Data Exchange (ETDEWEB)

    Mann, Ingrid; Lamy, Herve [Belgian Institute for Space Aeronomy, Brussels (Belgium); Czechowski, Andrzej [Space Research Center, Polish Academy of Sciences, Warsaw (Poland); Meyer-Vernet, Nicole; Zaslavsky, Arnaud, E-mail: ingrid.mann@aeronomie.b [LESIA, Observatoire de Paris, Meudon (France)

    2010-12-15

    The mass density of dust particles that form from asteroids and comets in the interplanetary medium of the solar system is, near 1 AU, comparable to the mass density of the solar wind. It is mainly contained in particles of micrometer size and larger. Dust and larger objects are destroyed by collisions and sublimation and hence feed heavy ions into the solar wind and the solar corona. Small dust particles are present in large number and as a result of their large charge to mass ratio deflected by electromagnetic forces in the solar wind. For nanodust particles of sizes {approx_equal}1-10 nm, recent calculations show trapping near the Sun and outside from about 0.15 AU ejection with velocities close to solar wind velocity. The fluxes of ejected nanodust are detected near 1 AU with the plasma wave instrument onboard the STEREO spacecraft. Although such electric signals have been observed during dust impacts before, the interpretation depends on several different parameters and data analysis is still in progress.

  20. Studies in medium energy physics

    International Nuclear Information System (INIS)

    Green, A.; Hoffmann, G.W.; McDonough, J.; Purcell, M.J.; Ray, R.L.; Read, D.E.; Worn, S.D.

    1991-12-01

    This document constitutes the (1991--1992) technical progress report and continuation proposal for the ongoing medium energy nuclear physics research program supported by the US Department of Energy through special Research Grant DE-FG05-88ER40444. The experiments discussed are conducted at the Los Alamos National Laboratory's (LANL) Clinton P. Anderson Meson Physics Facility (LAMPF) and the Alternating Gradient Synchrotron (AGS) facility of the Brookhaven National Laboratory (BNL). The overall motivation for the work discussed in this document is driven by three main objectives: (1) provide hadron-nucleon and hadron-nucleus scattering data which serve to facilitate the study of effective two-body interactions, test (and possibly determine) nuclear structure, and help study reaction mechanisms and dynamics; (2) provide unique, first-of-a-kind ''exploratory'' hadron-nucleus scattering data in the hope that such data will lead to discovery of new phenomena and new physics; and (3) perform precision tests of fundamental interactions, such as rare decay searches, whose observation would imply fundamental new physics

  1. The interstellar medium in galaxies

    CERN Document Server

    1997-01-01

    It has been more than five decades ago that Henk van de Hulst predicted the observability of the 21-cm line of neutral hydrogen (HI ). Since then use of the 21-cm line has greatly improved our knowledge in many fields and has been used for galactic structure studies, studies of the interstellar medium (ISM) in the Milky Way and other galaxies, studies of the mass distribution of the Milky Way and other galaxies, studies of spiral struc­ ture, studies of high velocity gas in the Milky Way and other galaxies, for measuring distances using the Tully-Fisher relation etc. Regarding studies of the ISM, there have been a number of instrumen­ tal developments over the past decade: large CCD's became available on optical telescopes, radio synthesis offered sensitive imaging capabilities, not only in the classical 21-cm HI line but also in the mm-transitions of CO and other molecules, and X-ray imaging capabilities became available to measure the hot component of the ISM. These developments meant that Milky Way was n...

  2. Medium of Instruction in Thai Science Learning

    Science.gov (United States)

    Chanjavanakul, Natpat

    The goal of this study is to compare classroom discourse in Thai 9th grade science lessons with English or Thai as a medium of instruction. This is a cross-sectional study of video recordings from five lessons in an English-medium instruction class and five lessons in a Thai- medium instruction class from a Thai secondary school. The study involved two teachers and two groups of students. The findings show the use of both English and Thai in English-medium lessons. Students tend to be more responsive to teacher questions in Thai than in English. The findings suggest the use of students' native language during English-medium lessons to help facilitate learning in certain situations. Additionally, the study provides implications for research, practice and policy for using English as a medium of instruction.

  3. Dynamics of shock wave propagation and interphase process in liquid-vapor medium

    Energy Technology Data Exchange (ETDEWEB)

    Pokusaev, B.G. [Moscow State Academy of Chemical Mechanical Engineering (Russian Federation); Pribaturin, N.A. [Institute of Thermophysics, Siberian Branch of Russian Academy of Sciences, Novosibirsk (Russian Federation)

    1995-09-01

    This paper considers the experimental results and physical effects on the pressure wave dynamics of a vapour-liquid two-phase medium of bubble and slug structure. The role of destruction and collapse of bubbles and slugs, phase transition (condensation and evaporation) on pressure wave dynamics is also studied. The general mechanisms of the wave formation, behavior and instability of a vapour-liquid structure under pressure waves, basic peculiarities of the interface heat transfer are obtained. In the experiments it has been shown that for the bubble medium the shock wave can be transformed into the powerful pressure pulse with an amplitude greater then the amplitude of the initial pressure wave. For the slug medium a characteristic structure of the amplificated wave is {open_quotes}comb{close_quotes} - like wave. It has been shown that the wave amplification caused by generation of secondary waves in a medium caused by destruction and collapse of bubbles and slugs. The obtained results can be useful at transient and emergency operational regimes of nuclear reactors, fuel tank, pipelines with two-phase flows and for development of safety models for chemical industry.

  4. Optical illusions induced by rotating medium

    Science.gov (United States)

    Zang, XiaoFei; Huang, PengCheng; Zhu, YiMing

    2018-03-01

    Different from the traditional single-function electromagnetic wave rotators (rotate the electromagnetic wavefronts), we propose that rotating medium can be extended to optical illusions such as breaking the diffraction limit and overlapping illusion. Furthermore, the homogeneous but anisotropic rotating medium is simplified by homogeneous and isotropic positive-index materials according to the effective medium theory, which is helpful for future device fabrication. Finite element simulations for the two-dimensional case are performed to demonstrate these properties.

  5. Chemically defined medium and Caenorhabditis elegans

    Science.gov (United States)

    Szewczyk, Nathaniel J.; Kozak, Elena; Conley, Catharine A.

    2003-01-01

    BACKGROUND: C. elegans has been established as a powerful genetic system. Use of a chemically defined medium (C. elegans Maintenance Medium (CeMM)) now allows standardization and systematic manipulation of the nutrients that animals receive. Liquid cultivation allows automated culturing and experimentation and should be of use in large-scale growth and screening of animals. RESULTS: We find that CeMM is versatile and culturing is simple. CeMM can be used in a solid or liquid state, it can be stored unused for at least a year, unattended actively growing cultures may be maintained longer than with standard techniques, and standard C. elegans protocols work well with animals grown in defined medium. We also find that there are caveats to using defined medium. Animals in defined medium grow more slowly than on standard medium, appear to display adaptation to the defined medium, and display altered growth rates as they change the composition of the defined medium. CONCLUSIONS: As was suggested with the introduction of C. elegans as a potential genetic system, use of defined medium with C. elegans should prove a powerful tool.

  6. Pressure-induced α->ω transition in titanium metal: a systematic study of the effects of uniaxial stress

    International Nuclear Information System (INIS)

    Errandonea, Daniel; Meng, Y.; Somayazulu, M.; Haeusermann, D.

    2005-01-01

    The effects of uniaxial stress on the pressure-induced α->ω transition in pure titanium (Ti) are investigated by means of angle dispersive X-ray diffraction in a diamond-anvil cell. Experiments under four different pressure environments reveal that: (1) the onset of the transition depends on the pressure medium used, going from 4.9GPa (no pressure medium) to 10.5GPa (argon pressure medium); (2) the α and ω phases coexist over a rather large pressure range, which depends on the pressure medium employed; (3) the hysteresis and quenchability of the ω phase is affected by differences in the sample pressure environment; and (4) a short-term laser heating of Ti lowers the α->ω transition pressure. Possible transition mechanisms are discussed in the light of the present results, which clearly demonstrate the influence of uniaxial stress in the α->ω transition

  7. 49 CFR 236.811 - Speed, medium.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Speed, medium. 236.811 Section 236.811 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Speed, medium. A speed not exceeding 40 miles per hour. ...

  8. English Medium of Instruction: A Situation Analysis

    Science.gov (United States)

    Uys, Mandie; van der Walt, Johann; van den Berg, Ria; Botha, Sue

    2007-01-01

    The majority of learners in southern Africa receive their education through the medium of a second language, English. Although teachers of English play a crucial role in helping learners to acquire language skills in the medium of instruction, we argue that subject content teachers' lack of attention to the teaching of the four language skills may…

  9. Electromagnetic Sources in a Moving Conducting Medium

    DEFF Research Database (Denmark)

    Johannsen, Günther

    1971-01-01

    The problem of an arbitrary source distribution in a uniformly moving, homogeneous, isotropic, nondispersive, conducting medium is solved. The technique used is to solve the problem in the rest system of the medium and then write the result in an appropriate four-dimensional, covariant form which...

  10. Effective medium theory for anisotropic metamaterials

    KAUST Repository

    Zhang, Xiujuan

    2015-01-20

    Materials with anisotropic material parameters can be utilized to fabricate many fascinating devices, such as hyperlenses, metasolids, and one-way waveguides. In this study, we analyze the effects of geometric anisotropy on a two-dimensional metamaterial composed of a rectangular array of elliptic cylinders and derive an effective medium theory for such a metamaterial. We find that it is possible to obtain a closed-form analytical solution for the anisotropic effective medium parameters, provided the aspect ratio of the lattice and the eccentricity of the elliptic cylinder satisfy certain conditions. The derived effective medium theory not only recovers the well-known Maxwell-Garnett results in the quasi-static regime, but is also valid beyond the long-wavelength limit, where the wavelength in the host medium is comparable to the size of the lattice so that previous anisotropic effective medium theories fail. Such an advance greatly broadens the applicable realm of the effective medium theory and introduces many possibilities in the design of structures with desired anisotropic material characteristics. A real sample of a recently theoretically proposed anisotropic medium, with a near-zero index to control the flux, is achieved using the derived effective medium theory, and control of the electromagnetic waves in the sample is clearly demonstrated.

  11. Optimization of medium composition for thermostable protease ...

    African Journals Online (AJOL)

    SERVER

    2008-04-17

    Apr 17, 2008 ... Optimization of the fermentation medium for maximization of thermostable neutral protease production by Bacillus sp. ... at 3.6 g/l and yeast extract at 3.9 g/l gived maximum protease activity of 6804 U/ml. Key words: Medium ... face method, which is used to study the effects of several factors influencing the ...

  12. Light propagation in a turbid medium with insonified microbubbles

    Science.gov (United States)

    Leung, Terence S.; Honeysett, Jack E.; Stride, Eleanor; Deng, Jing

    2013-01-01

    Surfactant stabilized microbubbles are widely used clinical contrast agents for ultrasound imaging. In this work, the light propagation through a turbid medium in the presence of microbubbles has been investigated. Through a series of experiments, it has been found that the optical attenuation is increased when the microbubbles in a turbid medium are insonified by ultrasound. Such microbubble enhanced optical attenuation is a function of both applied ultrasound pressure and microbubble concentration. To understand the mechanisms involved, a Monte Carlo (MC) model has been developed. Under ultrasound exposure, the sizes of microbubbles vary in space and time, and their dynamics are modeled by the Rayleigh-Plesset equation. By using Mie theory, the spatially and temporally varying optical scattering and scattering efficiency of microbubbles are determined based on the bubble sizes and internal refractive indices. The MC model is shown to effectively describe a medium with rapidly changing optical scattering, and the results are validated against both computational results using an N-layered diffusion equation model and experimental results using a clinical microbubble contrast agent (SonoVue).

  13. Effects of computed tomography contrast medium factors on contrast enhancement

    International Nuclear Information System (INIS)

    Terasawa, Kazuaki; Hatcho, Atsushi; Okuda, Itsuko

    2011-01-01

    The various nonionic iodinated contrast media used in contrast computed tomography (CT) studies differ in terms of their composition, characteristics, and iodine concentration (mgI/ml), as well as the volume injected (ml). Compared with ionic iodinated contrast media, nonionic iodinated contrast media are low-osmolar agents, with different agents having different osmotic pressures. Using a custom-made phantom incorporating a semipermeable membrane, the osmotic flow rate (hounsfield unit (HU)/s) could easily be measured based on the observed increase in CT numbers, and the relationship between the osmotic pressure and the osmotic flow rate could be obtained (r 2 =0.84). In addition, taking the effects of patient size into consideration, the levels of contrast enhancement in the abdominal aorta (AA) and inferior vena cava (IVC) were compared among four types of CT contrast medium. The results showed differences in contrast enhancement in the IVC during the equilibrium phase depending on the type of contrast medium used. It was found that the factors responsible for the differences observed in enhancement in the IVC were the osmotic flow rate and the volume of the blood flow pathways in the circulatory system. It is therefore considered that the reproducibility of contrast enhancement is likely to be reduced in the examination of parenchymal organs, in which scanning must be performed during the equilibrium phase, even if the amount of iodine injected per unit body weight (mgI/kg) is maintained at a specified level. (author)

  14. Normal Pressure Hydrocephalus (NPH)

    Science.gov (United States)

    ... local chapter Join our online community Normal Pressure Hydrocephalus (NPH) Normal pressure hydrocephalus is a brain disorder ... Symptoms Diagnosis Causes & risks Treatments About Normal Pressure Hydrocephalus Normal pressure hydrocephalus occurs when excess cerebrospinal fluid ...

  15. Effect of deformability on fluid flow through a fractured-porous medium

    International Nuclear Information System (INIS)

    Tsang, C.F.; Noorishad, J.; Witherspoon, P.A.

    1985-01-01

    A permeable geologic medium containing interstitial fluids generally undergoes deformation as the fluid pressure changes. Depending on the nature of the medium, the strain ranges from infinitesimal to finite quantities. This response is the result of a coupled hydraulic-mechanical phenomenon which can basically be formulated in the generalized three-dimensional theory of consolidation. Dealing mainly with media of little deformability, traditional hydrogeology accounts for medium deformability as far as it affects the volume of pore spaces, through the introduction of a coefficient of specific storage in the fluid flow equation. This treatment can be justified on the basis of a one-dimensional effective stress law and the assumption of homogeneity of the total stress field throughout the medium. The present paper uses a numerical model called ROCMAS (Noorishad et al., 1982; Noorishad e al., 1984) which was developed to calculate fluid flow through a deformable fractured-porous medium. The code employs the Finite Element Method based on a variational approach. It has been verified against a number of simple analytic solutions. In this work, the code is used to address the role of medium deformability in continuous and pulse testing techniques. The errors that may result because of application of traditional fluid flow methods are discussed. It is found that low pressure continuous well testing or pulse testing procedures can reduce such errors. 16 references, 9 figures, 1 table

  16. Micropropagation of Alstroemeria in liquid medium using slow release of medium components

    NARCIS (Netherlands)

    Klerk, de G.J.M.; Brugge, ter J.

    2010-01-01

    Alstroemeria rhizomes were micropropagated on semi-solid medium (AM) and in liquid medium (LM). In LM, growth was much enhanced (ca. 70%). Adequate gas exchange was crucial. This was obtained by agitation and in static medium by a sufficient large contact area of the explant and the gaseous

  17. Apparent paradoxes in classical electrodynamics: a fluid medium in an electromagnetic field

    International Nuclear Information System (INIS)

    Kholmetskii, A L; Yarman, T

    2008-01-01

    In this paper we analyse a number of teaching paradoxes of classical electrodynamics, dealing with the relativistic transformation of energy and momentum for a fluid medium in an external electromagnetic field. In particular, we consider a moving parallel plate charged capacitor, where the electric attraction of its plates is balanced by the pressure of gas convicted between the plates

  18. Inverse solutions for a second-grade fluid for porous medium ...

    Indian Academy of Sciences (India)

    Assuming certain forms of the stream function inverse solutions of an incompressible viscoelastic fluid for a porous medium channel in the presence of Hall currents are obtained. Expressions for streamlines, velocity components and pressure fields are described in each case and are compared with the known viscous and ...

  19. Collaborative Manufacturing for Small-Medium Enterprises

    Science.gov (United States)

    Irianto, D.

    2016-02-01

    Manufacturing systems involve decisions concerning production processes, capacity, planning, and control. In a MTO manufacturing systems, strategic decisions concerning fulfilment of customer requirement, manufacturing cost, and due date of delivery are the most important. In order to accelerate the decision making process, research on decision making structure when receiving order and sequencing activities under limited capacity is required. An effective decision making process is typically required by small-medium components and tools maker as supporting industries to large industries. On one side, metal small-medium enterprises are expected to produce parts, components or tools (i.e. jigs, fixture, mold, and dies) with high precision, low cost, and exact delivery time. On the other side, a metal small- medium enterprise may have weak bargaining position due to aspects such as low production capacity, limited budget for material procurement, and limited high precision machine and equipment. Instead of receiving order exclusively, a small-medium enterprise can collaborate with other small-medium enterprise in order to fulfill requirements high quality, low manufacturing cost, and just in time delivery. Small-medium enterprises can share their best capabilities to form effective supporting industries. Independent body such as community service at university can take a role as a collaboration manager. The Laboratory of Production Systems at Bandung Institute of Technology has implemented shared manufacturing systems for small-medium enterprise collaboration.

  20. Physical processes in the interstellar medium

    CERN Document Server

    Spitzer, Lyman

    2008-01-01

    Physical Processes in the Interstellar Medium discusses the nature of interstellar matter, with a strong emphasis on basic physical principles, and summarizes the present state of knowledge about the interstellar medium by providing the latest observational data. Physics and chemistry of the interstellar medium are treated, with frequent references to observational results. The overall equilibrium and dynamical state of the interstellar gas are described, with discussions of explosions produced by star birth and star death and the initial phases of cloud collapse leading to star formation.

  1. Parametric study of barometric pumping of a fractured porous medium

    Science.gov (United States)

    Adler, Pierre; Mourzenko, Valeri; Thovert, Jean Francois; Pili, Eric; Guillon, Sophie

    2015-04-01

    Fluctuations in the ambient atmospheric pressure result in motion of air in porous fractured media. This mechanism, known as barometric pumping, efficiently transports gaseous species through the vadose zone to the atmosphere. This is of interest in fields, such as transport of trace gases from soil to atmosphere, remediation of contaminated sites, radon in buildings, leakage from carbon sequestration sites and detection of nuclear explosions. The fractures are modeled as polygonal plane surfaces with a given transmissivity embedded in a permeable matrix. The slightly compressible fluid obeys Darcy's law in these two media with exchanges between them. The solute obeys convection-diffusion equations in both media again with exchanges. The numerical methodology is briefly described. The fractures and the porous medium are meshed by triangles and tetrahedra, respectively. The equations are discretized by the finite volume method and a Flux Limiting Scheme diminishes numerical dispersion. This model is applied to the Roselend Natural Laboratory. At a 55 m depth, a sealed cavity allows for gas release experiments across fractured porous rocks in the unsaturated zone. The standard case consist of hexagonal fractures with a radius of 5m, of aperture 0.5 mm and of density larger than 2.4 10-3 m-3; the pressure fluctuations are sinusoidal, of amplitude 0.01 bar and period 1 week; the solute concentration is equal to 1 at the bottom. Systematic results will be presented. First, the precision of the calculations is assessed. Second, the pressure and solute concentration fields are displayed and discussed. Within the time limit, the influence of the major parameters (fracture density, aperture, porosity, diffusion coefficient, pressure fluctuations including real recordings, …) is illustrated and discussed relatively to the standard case. Emphasis is put on some paradoxical results which are obtained. These results are discussed in terms of the amplification of solute

  2. Non-Isothermal Constitutive Relations and Heat Transfer Equations of a Two-Phase Medium

    Directory of Open Access Journals (Sweden)

    Uciechowska-Grakowicz Anna

    2017-09-01

    Full Text Available In the case of a two-phase medium – such as the soil, which consists of an elastic skeleton and is filled with pore fluids – stress and strain within the medium are dependent on both phases. Similarly, in the case of heat transfer, heat is conducted through the two phases at different rates, with an additional heat transfer between the phases. In the classical approach to modelling a porous medium, it is assumed that the fluid filling the pore space is water, which is incompressible. In the case of gas, the volume of which is strongly dependent on temperature and pressure, one should take this behavior into account in the constitutive relations for the medium. This work defines the physical relations of a two-phase medium and provides heat transfer equations, constructed for a porous, elastic skeleton with fluid-filled pores, which may be: liquid, gas, or mixture of liquid and a gas in non-isothermal conditions. The paper will present constitutive relations derived from the laws of irreversible thermodynamics, assuming that pores are filled with either a liquid or a gas. These relations, in the opinion of the authors, may be used as the basis for the construction of a model of the medium filled partly with a liquid and partly with a gas. It includes the possibility of independent heat transfer through any given two-phase medium phase, with the transfer of heat between the phases.

  3. Evaluation of Waste Mushroom Medium as a Fermentable Substrate and Bioethanol Production

    Science.gov (United States)

    Asakawa, Ai; Sasaki, Chizuru; Asada, Chikako; Nakamura, Yoshitoshi

    Waste Shiitake (Lentinula edodes) mushroom medium, a lignocellulosic aglicultural residue, was evaluated as a fermentable substrate. 87% of the fermentable sugars remained in the waste mushroom medium. The sugar yield of the waste mushroom medium (46.3%) was higher than that of raw mushroom medium (20.3%) after 48 h of enzymatic saccharification by Meicelase because L. edodes changed wood structure. These results indicated that the waste mushroom medium is a suitable substrate for fermentation. Next, the efficient ethanol production using steam explosion pretreatment was studied. After 30 h of simultaneous saccharification and fermentation (SSF) using Meicelase and Saccharomyces cerevisiae AM12, 20.0 g/L ethanol was produced from 100 g/L water-insoluble residue of the waste mushroom medium treated at a steam pressure of 20 atm and a steaming time of 5 min. This corresponded to an ethanol yield of 77.0% of the theoretical, i.e. 14.7 g of ethanol obtained from 100 g of waste mushroom medium.

  4. Nucleon form factors in the nuclear medium

    Science.gov (United States)

    Park, Chanyong; Lee, Jung Hun

    2018-01-01

    By using the AdS/CFT correspondence, we investigate various form factors between nucleons and mesons in a nuclear medium. In order to describe a nuclear medium holographically, we take into account the thermal charged AdS geometry with an appropriate IR cutoff. After introducing an anomalous dimension as a free parameter, we investigate how the nucleon’s mass is affected by the change of the anomalous dimension. Moreover, we study how the form factors of nucleons rely on the properties of the nuclear medium. We show that in a nuclear medium with different numbers of proton and neutron, the degenerated nucleon form factor in the vacuum is split into four different values depending on the isospin charges of nucleon and meson.

  5. Study of niobium corrosion in alkaline medium

    International Nuclear Information System (INIS)

    Almeida, S.H. de.

    1987-01-01

    A comparative study of niobium electrochemical behaviour in NaOH and KOH solution, with concentrations between 0,5 and 6,1M is presented. The studies were done through electrochemicals assays, consisting in the corrosion potential and anodic and cathodic polarization curves, complemented by loss of mass experiments. The niobium anodic behaviour in alkaline medium is characterized by passivation occurrence, with a stable film formation. The Na oH solution in alkaline medium are more corrosible to niobium than the KOH solution. The loss of mass assays showed that the corrosion velocit is more dependente of hydroxide concentration in KOH medium than the NaOH medium. (C.G.C.) [pt

  6. Fractional diffusion equation for heterogeneous medium

    Energy Technology Data Exchange (ETDEWEB)

    Polo L, M. A.; Espinosa M, E. G.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, Av, San Rafael Atlixco 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Del Valle G, E., E-mail: plabarrios@hotmail.com [Instituto Politecnico Nacional, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Col. San Pedro Zacatenco, 07738 Mexico D. F. (Mexico)

    2011-11-15

    The asymptotic diffusion approximation for the Boltzmann (transport) equation was developed in 1950 decade in order to describe the diffusion of a particle in an isotropic medium, considers that the particles have a diffusion infinite velocity. In this work is developed a new approximation where is considered that the particles have a finite velocity, with this model is possible to describe the behavior in an anomalous medium. According with these ideas the model was obtained from the Fick law, where is considered that the temporal term of the current vector is not negligible. As a result the diffusion equation of fractional order which describes the dispersion of particles in a highly heterogeneous or disturbed medium is obtained, i.e., in a general medium. (Author)

  7. (New molecular ions in the interstellar medium

    Directory of Open Access Journals (Sweden)

    Roueff Evelyne

    2015-01-01

    Full Text Available We summarize the present knowledge on the molecular ionic content in the interstellar medium and in circumstellar envelopes. Emphasis is given on the most recent detections and the related chemical issues.

  8. Small and medium power reactors 1987

    International Nuclear Information System (INIS)

    1987-12-01

    This TECDOC follows the publication of TECDOC-347 Small and Medium Power Reactors Project Initiation Study - Phase I published in 1985 and TECDOC-376 Small and Medium Power Reactors 1985 published in 1986. It is mainly intended for decision makers in Developing Member States interested in embarking on a nuclear power programme. It consists of two parts: 1) Guidelines for the Introduction of Small and Medium Power Reactors in Developing Countries. These Guidelines were established during the Advisory Group Meeting held in Vienna from 11 to 15 May 1987. Their purpose is to review key aspects relating to the introduction of Small and Medium Power Reactors in developing countries; 2) Up-dated Information on SMPR Concepts Contributed by Supplier Industries. According to the recommendations of the Second Technical Committee Meeting on SMPRs held in Vienna in March 1985, this part contains the up-dated information formerly published in Annex I of the above mentioned TECDOC-347. Figs

  9. Sharing perspectives on English-medium instruction

    CERN Document Server

    Ackerley, Katherine; Helm, Francesca

    2017-01-01

    This volume gives voice to the views and experiences of researchers, lecturers, administrative staff, teacher trainers and students with regard to the implementation of English-medium instruction in a public university based in the north-east of Italy.

  10. Effective medium theory principles and applications

    CERN Document Server

    Choy, Tuck C

    2015-01-01

    Effective medium theory dates back to the early days of the theory of electricity. Faraday in 1837 proposed one of the earliest models for a composite metal-insulator dielectric and around 1870 Maxwell and later Garnett (1904) developed models to describe a composite or mixed material medium. The subject has been developed considerably since and while the results are useful for predicting materials performance, the theory can also be used in a wide range of problems in physics and materials engineering. This book develops the topic of effective medium theory by bringing together the essentials of both the static and the dynamical theory. Electromagnetic systems are thoroughly dealt with, as well as related areas such as the CPA theory of alloys, liquids, the density functional theory etc., with applications to ultrasonics, hydrodynamics, superconductors, porous media and others, where the unifying aspects of the effective medium concept are emphasized. In this new second edition two further chapters have been...

  11. Medium Effects in Reactions with Rare Isotopes

    International Nuclear Information System (INIS)

    Bertulani, C A; Karakoç, M

    2012-01-01

    We discuss medium effects in knockout reactions with rare isotopes of weakly-bound nuclei at intermediate energies. We show that the poorly known corrections may lead to sizable modifications of knockout cross sections and momentum dsitributions.

  12. Switching power converters medium and high power

    CERN Document Server

    Neacsu, Dorin O

    2013-01-01

    An examination of all of the multidisciplinary aspects of medium- and high-power converter systems, including basic power electronics, digital control and hardware, sensors, analog preprocessing of signals, protection devices and fault management, and pulse-width-modulation (PWM) algorithms, Switching Power Converters: Medium and High Power, Second Edition discusses the actual use of industrial technology and its related subassemblies and components, covering facets of implementation otherwise overlooked by theoretical textbooks. The updated Second Edition contains many new figures, as well as

  13. Generation of medium frequency electrotherapeutic signals

    Science.gov (United States)

    Płaza, Mirosław; Szcześniak, Zbigniew; Dudek, Jolanta

    2017-08-01

    In this paper, generation methods of sinusoidal medium frequency electrotherapeutic signals have been studied. Signals of this type are increasingly used in electrotherapy owing to the development of both physical medicine and engineering sciences. The article presents analysis and comparison of analogue and digital methods of generation therapeutic signals. Analysis presented in the paper attempts to answer the question which technique of medium frequency signal generation can be most broadly applied in electrotherapy methods.

  14. Graphene wire medium: Homogenization and application

    DEFF Research Database (Denmark)

    Andryieuski, Andrei; Chigrin, Dmitry N.; Lavrinenko, Andrei

    2012-01-01

    In this contribution we analyze numerically the optical properties of the graphene wire medium, which unit cell consists of a stripe of graphene embedded into dielectric. We propose a simple method for retrieval of the isofrequency contour and effective permittivity tensor. As an example...... of the graphene wire medium application we demonstrate a reconfigurable hyperlens for the terahertz subwavelength imaging capable of resolving two sources with separation λ0/5 in the far-field....

  15. DYNAMIC DEFORMATION THE VISCOELASTIC TWOCOMPONENT MEDIUM

    Directory of Open Access Journals (Sweden)

    V. S. Polenov

    2015-01-01

    Full Text Available Summary. In the article are scope harmonious warping of the two-component medium, one component which are represent viscoelastic medium, hereditary properties which are described by the kernel aftereffect Abel integral-differential ratio BoltzmannVolterr, while second – compressible liquid. Do a study one-dimensional case. Use motion equation of two-component medium at movement. Look determination system these equalization in the form of damped wave. Introduce dimensionless coefficient. Combined equations happen to homogeneous system with complex factor relatively waves amplitude in viscoelastic component and in fluid. As a result opening system determinant receive biquadratic equation. Elastic operator express through kernel aftereffect Abel for space Fourier. With the help transformation and symbol series biquadratic equation reduce to quadratic equation. Come to the conclusion that in two-component viscoelastic medium exist two mode sonic waves. As a result solution of quadratic equation be found description advance of waves sonic in viscoelastic two-component medium, which physical-mechanical properties represent complex parameter. Velocity determination advance of sonic waves, attenuation coefficient, mechanical loss tangent, depending on characteristic porous medium and circular frequency formulas receive. Graph dependences of description advance of waves sonic from the temperature logarithm and with the fractional parameter γ are constructed.

  16. Selective medium for culture of Mycoplasma hyopneumoniae.

    Science.gov (United States)

    Cook, Beth S; Beddow, Jessica G; Manso-Silván, Lucía; Maglennon, Gareth A; Rycroft, Andrew N

    2016-11-15

    The fastidious porcine respiratory pathogen Mycoplasma hyopneumoniae has proven difficult to culture since it was first isolated in 1965. A reliable solid medium has been particularly challenging. Moreover, clinical and pathological samples often contain the fast-growing M. hyorhinis which contaminates and overgrows M. hyopneumoniae in primary culture. The aim of this study was to optimise the culture medium for recovery of M. hyopneumoniae and to devise a medium for selection of M. hyopneumoniae from clinical samples also containing M. hyorhinis. The solid medium devised by Niels Friis was improved by use of Purified agar and incorporation of DEAE-dextran. Addition of glucose or neutralization of acidity in liquid medium with NaOH did not improve the final yield of viable organisms or alter the timing of peak viability. Analysis of the relative susceptibility of M. hyopneumoniae and M. hyorhinis strains to four antimicrobials showed that M. hyopneumoniae is less susceptible than M. hyorhinis to kanamycin. This was consistent in all UK and Danish strains tested. A concentration of 2μg/ml of kanamycin selectively inhibited the growth of all M. hyorhinis tested, while M. hyopneumoniae was able to grow. This forms the basis of an effective selective culture medium for M. hyopneumoniae. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  17. Hydrostaticity of Pressure Media in Diamond Anvil Cells

    International Nuclear Information System (INIS)

    Shu-Jie, You; Liang-Chen, Chen; Chang-Qing, Jin

    2009-01-01

    Hydrostaticity under high pressure of several materials from solid, fluid to gas, which are widely used as pressure media in modern high-pressure experiments, is investigated in diamond anvil cells. Judging from the R-line widths and R 1 – R 2 peak separation of Ruby fluorescence, the inert argon gas is hydrostatic up to about 30 GPa. The behavior of silicon oil is found to be similar to argon at pressures less than 10 GPa, while the widening of R-lines and increase of R 1 – R 2 peak separation at higher pressure loads indicate a significant degradation of hydrostaticity. Therefore silicon oil is considered as a good pressure medium at pressures less than 10 GPa but poor at higher pressures

  18. [Raman spectroscopic study on silicone fluid as pressure gauge].

    Science.gov (United States)

    Liu, Jin; Sun, Qiang

    2010-09-01

    Within a diamond-anvil cell, the in-situ Raman spectroscopic study of silicone fluid was operated at room temperature 298. 1 K and under pressures from 0.1 to 5140.2 MPa. The present study analyzed the correlation of the modes 2906 and 2967 cm(-1) with different pressures, indicating that their wavenumbers linearly increased with increasing pressure. Therefore, this provided the potential to consider the pressure medium silicone fluid as a pressure gauge. The result suggested that silicone fluid could be used as a reliable pressure gauge in high-pressure experiments using diamond-anvil cells with Raman spectrometer, and the correlations between pressure and (delta nu p)2906, (delta nu p)2967 are, p = -0.05[(delta nu p)2967]2 + 73.07 (delta nu p)2967 + 91.54 and p = 0.14 [(delta nu p)2906]2 + 81.9 (delta nu p)2906 + 92.01, respectively.

  19. [Yeast (Saccharomyces cerevisiae) secretory expression vector maintained stably in Pro3+ transformants in rich medium].

    Science.gov (United States)

    Xie, H Y; Tang, Y; Jiang, W D; He, H Y; Liu, M; Kuang, D R

    2000-01-01

    A yeast (Saccharomyces cerevisiae) secretory expression vector containing PRO3 gene was constructed (pCBy310). beta HCG(Human choriogonadotropin beta subunit)-cDNA was inserted into pCBy310 to form a recombinant plasmid pCBy314. Since yeast proline auxotroph will not survive in rich medium (YPD), YPD could be used as a selection pressure, and pCBy314 could be maintained mitotically stable in transformants of yeast Pro3- auxotroph (MB299-7A) in rich medium. At an improved, yet not optimized cultural condition, the expression of beta HCG in culture medium was 650 micrograms/L. Our results showed not only that YPD could be used as a selection medium, but also that yeast grew better in YPD so as to increase the gene expression product, and that the component of YPD was simple and cheap. Our data suggested that PRO genes might be used widely in constructing vectors to clone and express foreign genes in yeast so that rich medium can be used as a selection pressure for direct selection.

  20. Evaluation of Insulin Medium or Chondrogenic Medium on Proliferation and Chondrogenesis of ATDC5 Cells

    OpenAIRE

    Yao, Yongchang; Zhai, Zhichen; Wang, Yingjun

    2014-01-01

    Background. The ATDC5 cell line is regarded as an excellent cell model for chondrogenesis. In most studies with ATDC5 cells, insulin medium (IM) was used to induce chondrogenesis while chondrogenic medium (CM), which was usually applied in chondrogenesis of mesenchymal stem cells (MSCs), was rarely used for ATDC5 cells. This study was mainly designed to investigate the effect of IM, CM, and growth medium (GM) on chondrogenesis of ATDC5 cells. Methods. ATDC5 cells were, respectively, cultured ...

  1. Intracranial pressure monitoring

    Science.gov (United States)

    ICP monitoring; CSF pressure monitoring ... There are 3 ways to monitor pressure in the skull (intracranial pressure). INTRAVENTRICULAR CATHETER The intraventricular catheter is the most accurate monitoring method. To insert an intraventricular catheter, a ...

  2. Intracranial pressure monitoring (image)

    Science.gov (United States)

    Intracranial pressure monitoring is performed by inserting a catheter into the head with a sensing device to monitor the pressure around the brain. An increase in intracranial pressure can cause a decrease in blood flow to ...

  3. High Blood Pressure Facts

    Science.gov (United States)

    ... Stroke Heart Disease Cholesterol Salt Million Hearts® WISEWOMAN High Blood Pressure Facts Recommend on Facebook Tweet Share Compartir On ... Top of Page CDC Fact Sheets Related to High Blood Pressure High Blood Pressure Pulmonary Hypertension Heart Disease Signs ...

  4. High Blood Pressure

    Science.gov (United States)

    ... normal blood pressure 140/90 or higher is high blood pressure Between 120 and 139 for the top number, ... prehypertension. Prehypertension means you may end up with high blood pressure, unless you take steps to prevent it. High ...

  5. High Blood Pressure (Hypertension)

    Science.gov (United States)

    ... Print Page Text Size: A A A Listen High Blood Pressure (Hypertension) Nearly 1 in 3 American adults has high ... weight. How Will I Know if I Have High Blood Pressure? High blood pressure is a silent problem — you ...

  6. Medium response limitations in short pulse amplifiers and absorbers

    International Nuclear Information System (INIS)

    Schappert, G.T.

    1976-07-01

    This report reviews some of the basic considerations which determine temporal pulse characteristics in amplifiers and absorbers. To concentrate on analytical results, the amplification or absorption of a step pulse is worked out in detail. It is shown that in the small signal regime the medium response time of T 2 is modified because of propagation effects to T 2 gL/2 for an amplifier of gain g and length L and T 2 /αl for an absorber of loss coefficient 1 and length L. Once saturation sets in, general analytical results are no longer possible except in the T 2 → 0, or rate equation limit. However, combining the finite T 2 small signals results with the rate equation results one can estimate risetime effects. Coherent effects, such as π pulses and self induced transparency have not yet found applications in high power, high pressure gas lasers. (orig.) [de

  7. Peristaltic transport of copper-water nanofluid saturating porous medium

    Science.gov (United States)

    Abbasi, F. M.; Hayat, T.; Ahmad, B.

    2015-03-01

    Prime goal of present study is to model the problem for peristaltic transport of copper-water nanofluid in an asymmetric channel. The fluid fills porous space. Analysis is carried out in the presence of mixed conviction, viscous dissipation and heat generation/absorption. Long wavelength and low Reynolds number approximations are utilized in problem formulation. Numerical computations are presented for the axial velocity, pressure gradient, streamlines, temperature and heat transfer rate at the boundary. Graphical analysis is carried out to examine the effects of sundry parameters on flow quantities of interest. Results revealed that the axial velocity of copper-water nanofluid decreases with an increase in the nanoparticle volume fraction. Copper nanoparticles prove effective coolant since they sufficiently reduce the fluid temperature and show increase in the heat transfer between the fluid and solid boundary. Moreover temperature of the fluid decreases by increasing the permeability of porous medium.

  8. Active medium gain study of electric-discharge oxygen-iodine laser

    Science.gov (United States)

    Kolobyanin, Yuriy; Adamenkov, Yuriy; Vyskubenko, Boris; Goryachev, Leonid; Ilyin, Sergey; Kalashnik, Anatoliy; Rakhimova, Tatiana; Rogozhnikov, Georgiy

    2007-05-01

    The paper reports on experimental studies of the active medium gain in supersonic electric-discharge oxygen-iodine laser (DOIL) based on traveling mw discharge. The measurements have included: absolute concentration, yield, and energy efficiency of production of SO in pure oxygen and oxygen-helium mixes at an oxygen partial pressure 3 to 15 Torr. For the gas flow to get rid of atomic oxygen, both heterogeneous mercury oxide coatings of the tube walls and homogeneous additives to the work mix, such as nitrogen oxide, have been used. The active medium of DOIL was formed using a nozzle array of the type of ejector sized as 10*50 mm2. The singlet oxygen-helium mix was supplied through three rows of sonic cylindrical nozzles, while the iodine-carrier gas mix - through two rows of supersonic conical nozzles with a half-opening angle of 10°(arc). The gas-phase iodine was produced in a quartz cell filled with iodine crystals. Room-temperature iodine vapors were picked up with a carrier gas (nitrogen or helium) and thus delivered into the nozzle array. The active medium was investigated by the high-resolution laser diode spectroscopy approach that used the laser type Vortex 6025 purchased from New Focus, Inc. The laser medium gain factor was determined by the intra-cavity approach having a sensitivity about 1*10 -6 cm -1. The static temperature of the medium was determined from the measurements of gain half-width. The gain of the active medium of electric-discharge OIL has been investigated. The DOIL in use was operating on a mix composed as O II:He=1:1 at a total pressure of 6 Torr and flowrate - about 1 mmol/s. With helium as an iodine carrier gas at a flowrate ~3 mmol/s, we have recorded a positive gain in the DOIL medium.

  9. Off-center blast in a shocked medium

    Science.gov (United States)

    Duncan-Miller, G. C.; Stone, W. D.

    2017-11-01

    When multiple blasts occur at different times, the situation arises in which a blast wave is propagating into a medium that has already been shocked. Determining the evolution in the shape of the second shock is not trivial, as it is propagating into air that is not only non-uniform, but also non-stationary. To accomplish this task, we employ the method of Kompaneets to determine the shape of a shock in a non-uniform media. We also draw from the work of Korycansky (Astrophys J 398:184-189. https://doi.org/10.1086/171847, 1992) on an off-center explosion in a medium with radially varying density. Extending this to treat non-stationary flow, and making use of approximations to the Sedov solution for the point blast problem, we are able to determine an analytic expression for the evolving shape of the second shock. In particular, we consider the case of a shock in air at standard ambient temperature and pressure, with the second shock occurring shortly after the original blast wave reaches it, as in a sympathetic detonation.

  10. Off-center blast in a shocked medium

    International Nuclear Information System (INIS)

    Duncan-Miller, G. C.; Stone, W. D.

    2017-01-01

    When multiple blasts occur at different times, the situation arises in which a blast wave is propagating into a medium that has already been shocked. Determining the evolution in the shape of the second shock is not trivial, as it is propagating into air that is not only non-uniform, but also non-stationary. To accomplish this task, we employ the method of Kompaneets to determine the shape of a shock in a non-uniform media. We also draw from the work of Korycansky (Astrophys J 398:184–189, 1992) on an off-center explosion in a medium with radially varying density. Extending this to treat non-stationary flow, and making use of approximations to the Sedov solution for the point blast problem, we are able to determine an analytic expression for the evolving shape of the second shock. In particular, we consider the case of a shock in air at standard ambient temperature and pressure, with the second shock occurring shortly after the original blast wave reaches it, as in a sympathetic detonation.

  11. CANDU 6 - the highly successful medium sized reactor

    International Nuclear Information System (INIS)

    Hedges, K. R.; Allen, P. J.; Hopwood, J. M.

    2000-01-01

    The CANDU 6 Pressurized Heavy Water Reactor system, featuring horizontal fuel channels and heavy water moderator continues to evolve, supported by AECL's strong commitment to comprehensive R and D programs. The initial CANDU 6 design started in the 1970's. The first plants went into service in 1983, and the latest version of the plant is under construction in China. With each plant the technology has evolved giving the dual advantages of proveness and modern technology. CANDU 6 delivers important advantages of the CANDU system with benefit to small and medium-sized grids. This technology has been successfully adopted by, and localized to varying extents in, each of the CANDU 6 markets. For example, all CANDU owners obtain their fuel from domestic suppliers. Progressive CANDU development continues at AECL to enhance this medium size product CANDU 6. There are three key CANDU development strategic thrusts: improved economics, fuel cycle flexibility, and enhanced safety. The CANDU 6 product is also enhanced by incorporating improvements and advanced features that will be arising from our CANDU Technology R and D programs in areas such as heavy water and tritium, control and instrumentation, fuel and fuel cycles, systems and equipment and safety and constructability. (author)

  12. Meson's correlation functions in a nuclear medium

    Directory of Open Access Journals (Sweden)

    Chanyong Park

    2016-09-01

    Full Text Available We investigate meson's spectrum, decay constant and form factor in a nuclear medium through holographic two- and three-point correlation functions. To describe a nuclear medium composed of protons and neutrons, we consider a hard wall model on the thermal charged AdS geometry and show that due to the isospin interaction with a nuclear medium, there exist splittings of the meson's spectrum, decay constant and form factor relying on the isospin charge. In addition, we show that the ρ-meson's form factor describing an interaction with pseudoscalar fluctuation decreases when the nuclear density increases, while the interaction with a longitudinal part of an axial vector meson increases.

  13. Ioversol contrast medium in canine neuroradiology

    International Nuclear Information System (INIS)

    Tudury, E.A.; Arias, M.V.B.; Camargo, P.L. de; Faria, M. de L.E.; Machado, C.E.G.

    1997-01-01

    Ioversol, a non-ionic, hydrosoluble iodine contrast medium at a concentration of 320mg I/ml was used to perform 26 contrast neuroradiographic studies (myelography, epidurography and cerebral ventriculography) in 22 dogs. Since this contrast medium is rapidly absorbed, proper radiographs were obtained within 30 minutes of injection. The product showed adequate radio-opacity, retention time, diffusion and liquor miscibility. Minimal side effects both during and after the radiographic procedures were observed. Not one patient developed seizures, in spite of the use of anesthetic protocols that included either zolarepan-tiletamine or levomepromazin- zilazine- or diazepam-sodium thiopental. The presentation of the contrast medium in a multiple dose vial was considered an advantage, since it decreases losses and allows repeated sterilization in autoclave [pt

  14. Coherent neutrino interactions in a dense medium

    International Nuclear Information System (INIS)

    Kiers, K.; Weiss, N.

    1997-01-01

    Motivated by the effect of matter on neutrino oscillations (the MSW effect) we study in more detail the propagation of neutrinos in a dense medium. The dispersion relation for massive neutrinos in a medium is known to have a minimum at nonzero momentum p∼G F ρ/√(2). We study in detail the origin and consequences of this dispersion relation for both Dirac and Majorana neutrinos both in a toy model with only neutral currents and a single neutrino flavor and in a realistic open-quotes standard modelclose quotes with two neutrino flavors. We find that for a range of neutrino momenta near the minimum of the dispersion relation, Dirac neutrinos are trapped by their coherent interactions with the medium. This effect does not lead to the trapping of Majorana neutrinos. copyright 1997 The American Physical Society

  15. Positron annihilation in the interstellar medium

    Science.gov (United States)

    Guessoum, Nidhal; Ramaty, Reuven; Lingenfelter, Richard E.

    1991-01-01

    Positronium formation and annihilation are studied in a model for the interstellar medium consisting of cold cloud cores, warm partially ionized cloud envelopes, and hot intercloud gas. The gamma-ray spectra resulting from positron annihilation in these components of the interstellar medium are calculated. The spectra from the individual components are then combined, using two limiting assumptions for the propagation of the positrons, namely, that the positrons propagate freely throughout the interstellar medium, and that the positrons are excluded from the cold cloud cores. In the first case, the bulk of the positrons annihilate in the cloud cores and the annihilation line exhibits broad wings resulting from the annihilation of positronium formed by charge exchange in flight. In the second case, the positrons annihilate mainly in the warm envelopes, and the line wings are suppressed.

  16. Charmonium propagation through a dense medium

    Directory of Open Access Journals (Sweden)

    Kopeliovich B.Z.

    2015-01-01

    Full Text Available Attenuation of a colourless c̄c dipole propagating with a large momentum through a hot medium originates from two sources, Debye screening (melting, and inelastic collisions with surrounding scattering centres (absorption. The former never terminates completely production of a bound charmonium in heavy ion collisions, even at very high temperatures. The latter, is controlled my the magnitude of the dipole cross section, related to the transport coefficient, which is the rate of transverse momentum broadening in the medium. A novel procedure of Lorentz boosting of the Schrödinger equation is developed, which allows to calculate the charmonium survival probability employing the path-integral technique, incorporating both melting and absorption. A novel mechanism of charmonium regeneration in a dense medium is proposed.

  17. [A modified MacConkey medium].

    Science.gov (United States)

    Wang, J; Tong, M

    1999-01-01

    We used MacConkey Agar(MCA) medium powder as a basis and added 6-benzoy-2-naphthyl phosphate disodium salt to modify MCA medium. This method was identified by examining several kinds of enteric pathogenic bacteria. Thus it allows us to observe lactose fermentative and phosphatase reaction simultaneously and to recognize Enterobacteriaceae from non-fermentable bacteria on primary culture plates according to the color of colony. This improved method simplifies the recognition procedure and shortens the time so that it is helpful to correctly choosing identification kit.

  18. Power converters for medium voltage networks

    CERN Document Server

    Islam, Md Rabiul; Zhu, Jianguo

    2014-01-01

    This book examines a number of topics, mainly in connection with advances in semiconductor devices and magnetic materials and developments in medium and large-scale renewable power plant technologies, grid integration techniques and new converter topologies, including advanced digital control systems for medium-voltage networks. The book's individual chapters provide an extensive compilation of fundamental theories and in-depth information on current research and development trends, while also exploring new approaches to overcoming some critical limitations of conventional grid integration te

  19. A Micromachined Pressure Sensor with Integrated Resonator Operating at Atmospheric Pressure

    Directory of Open Access Journals (Sweden)

    Sen Ren

    2013-12-01

    Full Text Available A novel resonant pressure sensor with an improved micromechanical double-ended tuning fork resonator packaged in dry air at atmospheric pressure is presented. The resonator is electrostatically driven and capacitively detected, and the sensor is designed to realize a low cost resonant pressure sensor with medium accuracy. Various damping mechanisms in a resonator that is vibrating at atmospheric pressure are analyzed in detail, and a formula is developed to predict the overall quality factor. A trade-off has been reached between the quality factor, stress sensitivity and drive capability of the resonator. Furthermore, differential sense elements and the method of electromechanical amplitude modulation are used for capacitive detection to obtain a large signal-to-noise ratio. The prototype sensor chip is successfully fabricated using a micromachining process based on a commercially available silicon-on-insulator wafer and is hermetically encapsulated in a custom 16-pin Kovar package. Preliminary measurements show that the fundamental frequency of the resonant pressure sensor is approximately 34.55 kHz with a pressure sensitivity of 20.77 Hz/kPa. Over the full scale pressure range of 100–400 kPa and the whole temperature range of −20–60 °C, high quality factors from 1,146 to 1,772 are obtained. The characterization of the prototype sensor reveals the feasibility of a resonant pressure sensor packaged at atmospheric pressure.

  20. A system for incubations at high gas partial pressure

    DEFF Research Database (Denmark)

    Sauer, Patrick; Glombitza, Clemens; Kallmeyer, Jens

    2012-01-01

    at hydrostatic pressure up to 60 MPa, temperatures up to 120°C, and at high gas partial pressure. The composition and partial pressure of gasses can be manipulated during the experiment. To keep costs low, the system is mainly made from off-the-shelf components with only very few custom-made parts. A flexible......High-pressure is a key feature of deep subsurface environments. High partial pressure of dissolved gasses plays an important role in microbial metabolism, because thermodynamic feasibility of many reactions depends on the concentration of reactants. For gases, this is controlled by their partial...... and inert PVDF (polyvinylidene fluoride) incubator sleeve, which is almost impermeable for gases, holds the sample and separates it from the pressure fluid. The flexibility of the incubator sleeve allows for sub-sampling of the medium without loss of pressure. Experiments can be run in both static and flow...

  1. Neutrino propagation in a weakly magnetized medium

    Indian Academy of Sciences (India)

    The organization of the paper is as follows: In §2 we discuss the basics of neutrino–photon effective action and the fermion propagators in a magnetized medium. Section 3 contains the details of the calculation of the one-loop diagram and in §4 we consider the weak-field limit. Finally, we conclude with a discussion.

  2. Gravitational Instability of Cylindrical Viscoelastic Medium ...

    Indian Academy of Sciences (India)

    symmetric cylinder of viscoelastic medium permeated with non uniform ... plasma (SCP) and weakly coupled plasma (WCP). The non uniform mag- netic field and rotation are considered to act along the axial direction of the cylinder. ... disperse, cold gas to collapse was given by Sir James Jeans (1902) and now known.

  3. Reflection of light from an anisotropic medium

    OpenAIRE

    Ignatovich, Filipp V.; Ignatovich, Vladimir

    2010-01-01

    We present here a general approach to treat reflection and refraction of light of arbitrary polarization from single axis anisotropic plates. We show that reflection from interface inside the anisotropic medium is accompanied by beam splitting and can create surface waves.

  4. Medium-range fire weather forecasts

    Science.gov (United States)

    J.O. Roads; K. Ueyoshi; S.C. Chen; J. Alpert; F. Fujioka

    1991-01-01

    The forecast skill of theNational Meteorological Center's medium range forecast (MRF) numerical forecasts of fire weather variables is assessed for the period June 1,1988 to May 31,1990. Near-surface virtual temperature, relative humidity, wind speed and a derived fire weather index (FWI) are forecast well by the MRF model. However, forecast relative humidity has...

  5. Influence of small and medium building engineering ...

    African Journals Online (AJOL)

    This study investigated the influence of small and medium building engineering entrepreneurship for the actualization of vision 20:2020 in Kebbi State, Nigeria. The study was conducted in Birnin Kebbi, Zuru and Argungu Local Government Areas of Kebbi State. The data were obtained from both primary and secondary ...

  6. Medium density fiberboard from mixed southern hardwoods

    Science.gov (United States)

    George E. Woodson

    1977-01-01

    Medium-density fiberboards of acceptable quality were made from a mixture of barky chips from 14 southern hardwoods. Boards made from fiber refined at three different plate clearances did not vary significantly in bending, internal bond (IB), or linear expansion. but, lack of replications and the fact that the refiner was not loaded to capacity caused these results to...

  7. Medium for Children’s Creativity

    DEFF Research Database (Denmark)

    Borum, Nanna; Kristensen, Kasper; Petersson, Eva

    2014-01-01

    This paper reports on an exploratory study that investigates 16 elementary school children’s interaction with two different mediums for creativity, LEGO® bricks and paper collages, drawing on the previous creativity assessment test carried out by Amabile [1]. The study is based in a playful...

  8. Theatrical Complicity as a Medium of Emancipation

    DEFF Research Database (Denmark)

    Nielsen, Thomas Rosendal

    2015-01-01

    of theatricality are re-described in a systems theoretical perspective in order to show how the theatrical attribution of guilt to the spectator can work as a medium of emancipation. The explication of the different dramaturgies makes it possible to distinguish between how self-righteous, self...

  9. Intergalactic medium heating by dark matter

    NARCIS (Netherlands)

    Ripamonti, E.; Mapelli, M.; Ferrara, A.

    2006-01-01

    Abstract: We derive the evolution of the energy deposition in the intergalactic medium (IGM) by dark matter (DM) decays/annihilations for both sterile neutrinos and light dark matter (LDM) particles. At z > 200 sterile neutrinos transfer a fraction f_abs~0.5 of their rest mass energy into the IGM;

  10. Borromean structures in medium-heavy nuclei

    DEFF Research Database (Denmark)

    Hove, Dennis; Fedorov, Dmitri Vladimir; Fynbo, Hans Otto Uldall

    2014-01-01

    Borromean nuclear cluster structures are expected at the corresponding driplines. We locate the regions in the nuclear chart with the most promising constituents, it being protons and alpha-particles and investigate in details the properties of the possible borromean two-alpha systems in medium h...

  11. The MIRI Medium Resolution Spectrometer calibration pipeline

    NARCIS (Netherlands)

    Labiano, A.; Azzollini, R.; Bailey, J.; Beard, S.; Dicken, D.; García-Marín, M.; Geers, V.; Glasse, A.; Glauser, A.; Gordon, K.; Justtanont, K.; Klaassen, P.; Lahuis, F.; Law, D.; Morrison, J.; Müller, M.; Rieke, G.; Vandenbussche, B.; Wright, G.

    2016-01-01

    The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is the only mid-IR Integral Field Spectrometer on board James Webb Space Telescope. The complexity of the MRS requires a very specialized pipeline, with some specific steps not present in other pipelines of JWST instruments,

  12. Innovation in Small and Medium Firms.

    Science.gov (United States)

    Organisation for Economic Cooperation and Development, Paris (France). Committee for Scientific and Technical Personnel.

    A study analyzed the policies of 20 Organisation for Economic Cooperation and Development (OECD) member countries pertaining to small and medium enterprises (SMEs). Aims of the study were to assess the current role of SMEs as generators and users of innovations, to analyze the components of a favorable climate for innovation in SMEs, and to…

  13. Absorption line spectroscopy of the interstellar medium

    International Nuclear Information System (INIS)

    Jura, M.

    1983-01-01

    Absorption line studies of the interstellar medium are described. The discussion is in three parts. The first describes current views of diffuse interstellar clouds, while the second reports the results of recent extensive surveys of interstellar regions. The final part is an outline of possible future observations. (orig.)

  14. Nuclear matter as a nonlinear optical medium

    International Nuclear Information System (INIS)

    Hefter, E.F.; Papini, G.

    1986-01-01

    This paper is concerned with the question whether nuclear matter should be considered as a nonlinear optical medium. Taking, in a pragmatic way, quality and quantity of the results of well-established linear and nonlinear approaches as the main criterion, an affirmative answer is seen to be consistent with long-standing practices adhered to in nuclear physics

  15. Radiculography with water-soluble contraste medium

    International Nuclear Information System (INIS)

    Araujo Pinheiro, R.S. de

    1987-01-01

    The etiologic diagnosis of the lumbar pain is discussed. The radiculography with water-soluble contrast medium is used and 250 cases are studied. Some practical criteria of indication executation and interpretation of the examination are reported. (M.A.C.) [pt

  16. Medium optimization for endochitinase production by recombinant ...

    African Journals Online (AJOL)

    The optimal concentrations of three factors were investigated by the response surface methodology using Box- Behnken design. The optimal medium components obtained for achieving the maximum activity of the endochitinase were as follows: Yeast extract 24.36 g/l, tryptone 20 g/l, YNB 5.0 g/l, potassium phosphate 100 ...

  17. Intergalactic medium heating by dark matter

    NARCIS (Netherlands)

    Ripamonti, E.; Mapelli, M.; Ferrara, A.

    2007-01-01

    We derive the evolution of the energy deposition in the intergalactic medium (IGM) by dark matter (DM) decays/annihilations for both sterile neutrinos and light dark matter (LDM) particles. At z > 200 sterile neutrinos transfer a fraction f(abs) similar to 0.5 of their rest mass energy into the IGM;

  18. The Digital Medium Meets the Advertising Message.

    Science.gov (United States)

    Nisenholtz, Martin

    1994-01-01

    Discusses the likelihood that companies will use online services as an advertising medium. Topics addressed include the art of interactive marketing; advertising in the digital age; early experiments with interactive marketing, including the use of videotex and videodisc; and recent trends that set the stage for interactive marketing to personal…

  19. Medium energy heavy ion operations at RHIC

    International Nuclear Information System (INIS)

    Drees, K.A.; Ahrens, L.; Bai, M.; Beebe-Wang, J.; Blackler, I.M.C.; Blaskiewicz, M.; Brown, K.A.; Brennan, M.; Bruno, D.; Butler, J.; Carlson, C.; Connolly, R.; D'Ottavio, T.; Fischer, W.; Fu, W.; Gassner, D.; Harvey, M.; Hayes, T.; Huang, H.; Hulsart, R.; Ingrassia, P.; Kling, N.; Lafky, M.; Laster, J.; Lee, R.C.; Litvinenko, V.; Luo, Y.; MacKay, W.W.; Marr, G.; Mapes, M.; Marusic, A.; Mernick, K.; Michnoff, R.; Minty, M.; Montag, C.; Morris, J.; Naylor, C.; Nemesure, S.; Pilat, F.; Ptitsyn, V.; Robert-Demolaize, G.; Roser, T.; Sampson, P.; Satogata, T.; Schoefer, V.; Schultheiss, C.; Severino, F.; Shrey, T.; Smith, K.S.; Tepikian, S.; Thieberger, P.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J.; van Kuik, B.; Wilinski, M.; Zaltsman, A.; Zeno, K.; Zhang, S.Y.

    2011-01-01

    As part of the search for a phase transition or critical point on the QCD phase diagram, an energy scan including 5 different energy settings was performed during the 2010 RHIC heavy ion run. While the top beam energy for heavy ions is at 100 GeV/n and the lowest achieved energy setpoint was significantly below RHICs injection energy of approximately 10 GeV/n, we also provided beams for data taking in a medium energy range above injection energy and below top beam energy. This paper reviews RHIC experience and challenges for RHIC medium energy operations that produced full experimental data sets at beam energies of 31.2 GeV/n and 19.5 GeV/n. The medium energy AuAu run covered two beam energies, both above the RHIC injection energy of 9.8 GeV but well below the standard store energy of 100 GeV (see table 1). The low energy and full energy runs with heavy ions in FY10 are summarized in (1) and (2). Stochastic Cooling ((3)) was only used for 100 GeV beams and not used in the medium energy run. The efficiency of the transition from 100 GeV operation to 31.2 GeV and then to 19.5 GeV was remarkable. Setup took 32 h and 19 h respectively for the two energy settings. The time in store, defined to be the percentage of time RHIC provides beams in physics conditions versus calendar time, was approximately 52% for the entire FY10 heavy ion run. In both medium energy runs it was well above this average, 68% for 31.5 GeV and 82% for 19.5 GeV. For both energies RHIC was filled with 111 bunches with 1.2 10 9 and 1.3 10 9 ions per bunch respectively.

  20. Medium energy heavy ion operations at RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Drees, K.A.; Ahrens, L.; Bai, M.; Beebe-Wang, J.; Blackler, I.M.C.; Blaskiewicz, M.; Brown, K.A.; Brennan, M.; Bruno, D.; Butler, J.; Carlson, C.; Connolly, R.; D' Ottavio, T.; Fischer, W.; Fu, W.; Gassner, D.; Harvey, M.; Hayes, T.; Huang, H.; Hulsart, R.; Ingrassia, P.; Kling, N.; Lafky, M.; Laster, J.; Lee, R.C.; Litvinenko, V.; Luo, Y.; MacKay, W.W.; Marr, G.; Mapes. M.; Marusic, A.; Mernick, K.; Michnoff, R.; Minty, M.; Montag, C.; Morris, J.; Naylor, C.; Nemesure, S.; Pilat, F.; Ptitsyn, V.; Robert-Demolaize, G.; Roser, T.; Sampson, P.; Satogata, T.; Schoefer, V.; Schultheiss, C.; Severino, F.; Shrey, T.; Smith, K.S.; Tepikian, S.; Thieberger, P.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J.; van Kuik, B.; Wilinski, M.; Zaltsman, A.; Zeno, K.; Zhang, S.Y.

    2011-03-28

    As part of the search for a phase transition or critical point on the QCD phase diagram, an energy scan including 5 different energy settings was performed during the 2010 RHIC heavy ion run. While the top beam energy for heavy ions is at 100 GeV/n and the lowest achieved energy setpoint was significantly below RHICs injection energy of approximately 10 GeV/n, we also provided beams for data taking in a medium energy range above injection energy and below top beam energy. This paper reviews RHIC experience and challenges for RHIC medium energy operations that produced full experimental data sets at beam energies of 31.2 GeV/n and 19.5 GeV/n. The medium energy AuAu run covered two beam energies, both above the RHIC injection energy of 9.8 GeV but well below the standard store energy of 100 GeV (see table 1). The low energy and full energy runs with heavy ions in FY10 are summarized in [1] and [2]. Stochastic Cooling ([3]) was only used for 100 GeV beams and not used in the medium energy run. The efficiency of the transition from 100 GeV operation to 31.2 GeV and then to 19.5 GeV was remarkable. Setup took 32 h and 19 h respectively for the two energy settings. The time in store, defined to be the percentage of time RHIC provides beams in physics conditions versus calendar time, was approximately 52% for the entire FY10 heavy ion run. In both medium energy runs it was well above this average, 68% for 31.5 GeV and 82% for 19.5 GeV. For both energies RHIC was filled with 111 bunches with 1.2 10{sup 9} and 1.3 10{sup 9} ions per bunch respectively.

  1. Evaluation of frequency-dependent ultrasound attenuation in transparent medium using focused shadowgraph technique

    Science.gov (United States)

    Iijima, Yukina; Kudo, Nobuki

    2017-07-01

    Acoustic fields of a short-pulsed ultrasound propagating through a transparent medium with ultrasound attenuation were visualized by the focused shadowgraph technique. A brightness waveform and its spatial integrations were derived from a visualized field image and compared with a pressure waveform measured by a membrane hydrophone. The experimental results showed that first-order integration of the brightness wave has good agreement with the pressure waveforms. Frequency-dependent attenuation of the pulse propagating through castor oil was derived from brightness and pressure waveforms, and attenuation coefficients determined from focused shadowgraphy and hydrophone techniques showed good agreement. The results suggest the usefulness of the shadowgraph technique not only for the visualization of ultrasound fields but also for noncontact estimation of rough pressure waveforms and correct ultrasound attenuation.

  2. Mathematical simulation of kinetic processes in moving irradiated by neutrons gas medium containing uranium nanoparticles

    Science.gov (United States)

    Alexeeva, I. V.; Budnik, A. P.; Sipachev, A. V.; Slyunyaev, M. N.

    2017-02-01

    The theoretical model and program complex for mathematical simulation of processes of transformation the nuclear energy into optical radiation energy was developed. The model includes the equations of gas dynamics, as well as the equations describing the kinetic processes in the non-equilibrium plasma excited by uranium fission fragments. The kinetic processes in the moving irradiated by neutrons argon-xenon gas medium containing uranium nanoparticles was investigated. The space-time evolution of this medium in nonuniform changing over time neutron field was studied. The space-time evolution of the gas parameters (temperature, density, velocity, pressure), as well as the distribution of the concentration of uranium nanoparticles under different initial velocities of the gas and the size of the nanoparticles was calculated. The amplifying properties of a laser-active space-nonuniform nuclear-excited moving argon-xenon medium, containing uranium nanoparticles and irradiated by neutrons, was studied.

  3. Recommendation to use iso-osmotic contrast medium in interventional treatment

    International Nuclear Information System (INIS)

    Zhou Bing; Cheng Yongde

    2012-01-01

    With the rapid development of imaging diagnostic and interventional therapeutic techniques, the contrast medium (CM) has been used more and more common in clinical practice, and meanwhile more and more attention has been paid to the CM-related adverse events. Contrast induced nephropathy (CN) is the most common CM-related adverse event, and CM-related neurotoxicity has already attracted the physicians' attention. The osmotic pressure of the iso-osmotic contrast medium (IOCM) is quite the same as that of the plasma, and therefore its safety is higher than that of low-osmotic contrast medium (LOCM), the patient's tolerance to IOCM is better than that to LOCM. For this reason, the use of IOCM should be strongly recommended in interventional procedures, which is of great significance to the reduction of the occurrence of CM-related adverse events. (authors)

  4. Time-domain Helmholtz-Kirchhoff integral for surface scattering in a refractive medium.

    Science.gov (United States)

    Choo, Youngmin; Song, H C; Seong, Woojae

    2017-03-01

    The time-domain Helmholtz-Kirchhoff (H-K) integral for surface scattering is derived for a refractive medium, which can handle shadowing effects. The starting point is the H-K integral in the frequency domain. In the high-frequency limit, the Green's function can be calculated by ray theory, while the normal derivative of the incident pressure from a point source is formulated using the ray geometry and ray-based Green's function. For a corrugated pressure-release surface, a stationary phase approximation can be applied to the H-K integral, reducing the surface integral to a line integral. Finally, a computationally-efficient, time-domain H-K integral is derived using an inverse Fourier transform. A broadband signal scattered from a sinusoidal surface in an upwardly refracting medium is evaluated with and without geometric shadow corrections, and compared to the result from a conventional ray model.

  5. Short- and medium-range orders in Cu46Zr54 metallic glasses under shock compression

    Science.gov (United States)

    Jian, W. R.; Yao, X. H.; Wang, L.; Tang, X. C.; Luo, S. N.

    2015-07-01

    We investigate short- and medium-range orders in Cu46Zr54 metallic glasses, as represented by icosahedra and icosahedron networks, respectively, under shock compression with molecular dynamics simulations. Complementary isothermal compression and isobaric heating simulations reveal that compression below 60 GPa gives rise to increased coordination and thus high-coordination-number Voronoi polyhedra, such as icosahedra; however, pressure-induced collapse or thermal disintegration of icosahedra (and subsequently, icosahedron networks) occurs at pressures above 60 GPa or at melting, accompanied by free volume increase. The evolutions of the short- and medium-range orders upon shock loading are the effects of compression combined with shock-induced melting. The structural changes are partially reversible for weak shocks without melting (below 60 GPa) and irreversible for strong shocks. Crystallization does not occur under isothermal or shock compression at molecular dynamics scales.

  6. Numerical simulation for a two-phase porous medium flow problem with rate independent hysteresis

    KAUST Repository

    Brokate, M.

    2012-05-01

    The paper is devoted to the numerical simulation of a multiphase flow in porous medium with a hysteretic relation between the capillary pressures and the saturations of the phases. The flow model we use is based on Darcys law. The hysteretic relation between the capillary pressures and the saturations is described by a play-type hysteresis operator. We propose a numerical algorithm for treating the arising system of equations, discuss finite element schemes and present simulation results for the case of two phases. © 2011 Elsevier B.V. All rights reserved.

  7. Coupling of two-phase flow in fractured-vuggy reservoir with filling medium

    Directory of Open Access Journals (Sweden)

    Xie Haojun

    2017-03-01

    Full Text Available Caves in fractured-vuggy reservoir usually contain lots of filling medium, so the two-phase flow in formations is the coupling of free flow and porous flow, and that usually leads to low oil recovery. Considering geological interpretation results, the physical filled cave models with different filling mediums are designed. Through physical experiment, the displacement mechanism between un-filled areas and the filling medium was studied. Based on the experiment model, we built a mathematical model of laminar two-phase coupling flow considering wettability of the porous media. The free fluid region was modeled using the Navier-Stokes and Cahn-Hilliard equations, and the two-phase flow in porous media used Darcy's theory. Extended BJS conditions were also applied at the coupling interface. The numerical simulation matched the experiment very well, so this numerical model can be used for two-phase flow in fracture-vuggy reservoir. In the simulations, fluid flow between inlet and outlet is free flow, so the pressure difference was relatively low compared with capillary pressure. In the process of water injection, the capillary resistance on the surface of oil-wet filling medium may hinder the oil-water gravity differentiation, leading to no fluid exchange on coupling interface and remaining oil in the filling medium. But for the water-wet filling medium, capillary force on the surface will coordinate with gravity. So it will lead to water imbibition and fluid exchange on the interface, high oil recovery will finally be reached at last.

  8. A Graph-theoretic Pipe Network Method for water flow simulation in a porous medium: GPNM

    International Nuclear Information System (INIS)

    Xu, Z.H.; Ma, G.W.; Li, S.C.

    2014-01-01

    A new numerical simulation method for water flow in a porous medium is proposed. A porous medium is discretized graph-theoretically into a discrete pipe network. Each pipe in the oriented network is defined as a weighted element with a starting node and an ending node. Equivalent hydraulic parameters are derived based on the Darcy’s Law. A node law of flow rate and a pipe law of pressure are derived based on the conservation of mass and energy, as well as the graph-theoretic network theory. A unified governing equation for both the inner pipes and the boundary pipes are deduced. A conversion law of flow rate/velocity is proposed and discussed. A few case studies are analyzed and compared with those from analytical solutions and finite element analysis. It shows that the proposed Graph-theoretic Pipe Network Method (GPNM) is effective in analyzing water flow in a porous medium. The advantage of the proposed GPNM is that a continuous porous medium is discretized into a discrete pipe network, which is analyzed same as for a discrete fracture network. Solutions of water pressures and flow rates in the discrete pipe network are obtained by solving a system of nonhomogeneous linear equations. It is demonstrated with high efficiency and accuracy. The developed method can be extended to analyzing water flow in fractured and porous media in 3-D conditions

  9. Medium Modifications of Hadrons in Photon Induced Reactions

    International Nuclear Information System (INIS)

    Schadmand, S.

    2004-01-01

    Indications for in-medium modifications of hadron properties are reported from photoabsorption and meson production experiments. Strong medium modifications are observed in inclusive photoabsorption experiments and theoretical models investigate the in-medium dynamics of baryon resonances and their coupling to mesons. Recent experiments study the in-medium behavior of scalar and vector mesons where theoretical models expect in-medium modifications of the meson spectral functions that might be connected to partial restoration of chiral symmetry

  10. Sliding through a superlight granular medium.

    Science.gov (United States)

    Pacheco-Vázquez, F; Ruiz-Suárez, J C

    2009-12-01

    We explore the penetration dynamics of an intruder in a granular medium composed of expanded polystyrene spherical particles. Three features distinguish our experiment from others studied so far in granular physics: (a) the impact is horizontal, decoupling the effects of gravity and the drag force; (b) the density of the intruder rho(i) is up to 350 times larger than the density of the granular medium rho(m); and (c) the way the intruder moves through the material, sliding at the bottom of the column with small friction. Under these conditions we find that the final penetration D scales with (rho(i)/rho(m)) and the drag force Fd and D saturate with the height of the granular bed.

  11. Teaching in English-medium programmes

    DEFF Research Database (Denmark)

    Lauridsen, Karen M.; Cozart, Stacey Marie

    This contribution describes and discusses the module Teaching in English-medium programmes, an elective module offered as part of the teacher training programme for assistant professors (“adjunktpædagogikum”) at Aarhus University. In order to complete the whole programme, assistant professors must...... have at least one such elective module (http://upnet.au.dk/adjunktkursus/). Aarhus University offers the teacher training programme in Danish and in English for international faculty. Teaching in English-medium programmes is part of the Danish track, but taught through English. Building...... on the foundation module in the whole course, this particular module has been established especially for those Danish assistant professors who are to teach in the EMI programmes. The intended learning outcomes are that, at the end of the course, participants should be able to plan and deliver their teaching...

  12. On accretion from an inhomogeneous medium

    International Nuclear Information System (INIS)

    Davies, R.E.; Pringle, J.E.

    1980-01-01

    Hypersonic accretion flow in two dimensions from an infinite medium which contains a small density and/or velocity gradient is considered. To first order in rsub(a)/h, where rsub(a) is the accretion radius and h the scale of the gradient, the accretion rate is unaffected and the accreted angular momentum is zero. Thus previous estimates of the amount of angular momentum accreted may severely overestimate the actual value. (author)

  13. Exploring medium effects on the nuclear force

    International Nuclear Information System (INIS)

    Sammarruca, F.

    2004-01-01

    This STI product contains a description of results from theoretical studies in nuclear physics. The goal is a systematic investigation of the nuclear force in the nuclear medium. The problems addressed are: density-dependent effective interactions as seen through proton-nucleus reactions, nuclear matter with unequal densities of protons and neutrons, applications to asymmetric nuclei through predictions of neutron radii and neutron skins

  14. El Naschie's coherence on the subquantum medium

    International Nuclear Information System (INIS)

    Agop, M.; Ioannou, P.D.; Nica, P.; Galusca, G.; Stefan, M.

    2005-01-01

    In the hydrodynamic formulation of the Scale Relativity theory one shows that a stable vortices distribution of bipolaron type induces superconducting pairs by means of the quantum potential. One builds the superconducting fractal by an iterated map and demonstrates that the superconducting pairs results as projections of this fractal. Thus, usual mechanisms (as example the exchange interaction used in the bipolaron theory) are reduced to the coherence on the subquantum medium in a ε (∞) space (El Naschie's coherence)

  15. Radiculography with reduced amounts of contrast medium

    International Nuclear Information System (INIS)

    Signorini, E.; Caputo, N.; Chiurulla, C.; Ciorba, E.; Pelliccioli, G.P.; Cianciulli, E.

    1984-01-01

    Because of the frequency and seriousness of side effects observed after radiculography, due to, among the other things, the amount of contrast medium, the authors describe a method that gives diagnostically satisfactory results using a low dose of contrast and a tangent-beam technique. Among 106 patients undergoing radiculography with a tangent-beam technique and Iopamidol, only 4 developed mild side effects, namely headache in three cases and headache with nausea in one. (Author)

  16. Medium-energy ion reflection from solids

    CERN Document Server

    Mashkova, ES

    1985-01-01

    ``Medium-Energy Ion Reflection from Solids'' analyses the results of experimental, theoretical and computer investigations on the process of scattering of ions by solid surfaces. Surface scattering is a relatively young and rapidly developing branch of the physics of atomic collisions and the literature on this subject has rapidly grown.As the first monograph devoted specifically to surface scattering of ions, this book is directed at scientists involved in ion-solid interaction studies.

  17. Optimization of medium composition for thermostable protease ...

    African Journals Online (AJOL)

    A 24 fullfactorial central composite design (CCD) was chosen to explain the combined effects of the four medium constituents; corn starch, soybean meal, glucose and yeast extract. The optimized values obtained by the statistical analysis showed that corn starch at 19.8 g/l, soybean meal at 9.7 g/l, glucose at 3.6 g/l and ...

  18. Medium-Term Oil Market Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    How much oil will the world consume in 2011? What role will OPEC play in global oil production? Will biofuels become an important part of the oil market? The International Energy Agencys (IEA) Medium-Term Oil Market Report tackles these questions, adopting a perspective that goes beyond the traditional short-term market analysis provided in the IEAs monthly Oil Market Report. Drawing on current futures curves and the investment threshold for upstream projects, the Medium-Term Oil Market Report analyses how global demand and supply balances may develop in the next five years. The forecasts look in detail at product demand and the supply potential from all the firmly planned individual upstream and downstream projects around the world. The results provide invaluable insights on vital issues such as surplus production capacity and product supply. The rapid pace of change in the oil market means that forecasts can become outdated very quickly. This interim update provides the opportunity to rebase the data and forecasts in the annual Medium-Term Oil Market Report and to discuss and analyse new issues affecting the oil industry. Policymakers, market analysts, energy experts and anyone interested in understanding and following trends in the oil market should find this report extremely useful.

  19. Medium-Term Oil Market Report 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    How much oil will the world consume in 2012? What role will OPEC play in global oil production? Will biofuels become an important part of the oil market? How will the refinery sector cope? The International Energy Agency (IEA) Medium-Term Oil Market Report tackles these questions, adopting a perspective that goes beyond the traditional short-term market analysis provided in the IEA Oil Market Report. Drawing on current futures curves and the investment threshold for upstream projects, the Medium-Term Oil Market Report analyses how global demand and supply balances may develop. By assessing all firmly planned upstream and downstream projects worldwide, this report forecasts supply and demand potential for crude and petroleum products over the next five years. The results provide an invaluable insight into vital issues such as surplus production capacity and product supply. An essential report for all policymakers, market analysts, energy experts and anyone interested in understanding and following oil market trends, the Medium-Term Oil Market Report is a further element of the strong commitment of the IEA to improving and expanding the quality, timeliness and accuracy of energy data and analysis.

  20. Heating of the local interstellar medium

    International Nuclear Information System (INIS)

    Arnaud, M.; Rothenflug, R.

    1986-07-01

    From soft X ray measurements evidence emerges that a large volume of the local interstellar medium is filled with hot gas. The sky has now been almost entirely scanned in the soft X ray bands. Although the very contribution of a halo or/and large scale galactic components is still debated, it appears that an important part of this soft X ray emission has a local origin. Its thermal nature was strongly supported after X ray lines of some highly stripped ions were observed. This local interstellar medium is likely to have been heated by the energy released in Supernova(e) explosion(s). We review such models and discuss whether they may account for both the observed fluxes in soft X ray bands and the X ray spectral data. Special emphasis is put on the intricacy of the data, which presently makes hopeless a detailed understanding of the hot local interstellar medium. Consistency of such models with key parameters (such as OVI column density) is also studied

  1. Hysteresis in pressure-driven DNA denaturation.

    Directory of Open Access Journals (Sweden)

    Enrique Hernández-Lemus

    Full Text Available In the past, a great deal of attention has been drawn to thermal driven denaturation processes. In recent years, however, the discovery of stress-induced denaturation, observed at the one-molecule level, has revealed new insights into the complex phenomena involved in the thermo-mechanics of DNA function. Understanding the effect of local pressure variations in DNA stability is thus an appealing topic. Such processes as cellular stress, dehydration, and changes in the ionic strength of the medium could explain local pressure changes that will affect the molecular mechanics of DNA and hence its stability. In this work, a theory that accounts for hysteresis in pressure-driven DNA denaturation is proposed. We here combine an irreversible thermodynamic approach with an equation of state based on the Poisson-Boltzmann cell model. The latter one provides a good description of the osmotic pressure over a wide range of DNA concentrations. The resulting theoretical framework predicts, in general, the process of denaturation and, in particular, hysteresis curves for a DNA sequence in terms of system parameters such as salt concentration, density of DNA molecules and temperature in addition to structural and configurational states of DNA. Furthermore, this formalism can be naturally extended to more complex situations, for example, in cases where the host medium is made up of asymmetric salts or in the description of the (helical-like charge distribution along the DNA molecule. Moreover, since this study incorporates the effect of pressure through a thermodynamic analysis, much of what is known from temperature-driven experiments will shed light on the pressure-induced melting issue.

  2. Tracer transfer in consolidated porous medium and fractured porous medium: experimentations and modelling

    International Nuclear Information System (INIS)

    Dalla Costa, C.

    2007-07-01

    We try to identify and model physical and chemical mechanisms governing the water flow and the solute transport in fractured consolidated porous medium. An original experimental device was built. The 'cube' consists of an idealized fractured medium reproduced by piling up consolidated porous cubes of 5 cm edge. Meanwhile, columns of the homogeneous consolidated porous medium are studied. The same anionic tracing technique is used in both cases. Using a system analysis approach, we inject concentration pulses in the device to obtain breakthrough curves. After identifying the mass balance and the residence time, we fit the CD and the MIM models to the experimental data. The MIM model is able to reproduce experimental curves of the homogeneous consolidated porous medium better than the CD model. The mobile water fraction is in accordance with the porous medium geometry. The study of the flow rate influence highlights an interference dispersion regime. It was not possible to highlight the observation length influence in this case. On the contrary, we highlight the effect of the observation scale on the fractured and porous medium, comparing the results obtained on a small 'cube' and a big 'cube'. The CD model is not satisfactory in this case. Even if the MIM model can fit the experimental breakthrough curves, it was not possible to obtain unique parameters for the set of experiments. (author)

  3. Spectroscopic Study of the Effects of Pressure Media on High-Pressure Phase Transitions in Natrolite

    Energy Technology Data Exchange (ETDEWEB)

    D Liu; W Lei; Z Liu; Y Lee

    2011-12-31

    Structural phase transitions in natrolite have been investigated as a function of pressure and different hydrostatic media using micro-Raman scattering and synchrotron infrared (IR) spectroscopy. Natrolite undergoes two reversible phase transitions at 0.86 and 1.53 GPa under pure water pressure medium. These phase transitions are characterized by the changes in the vibrational frequencies of four- and eight-membered rings related to the variations in the bridging T-O-T angles and the geometry of the elliptical eight-ring channels under pressure. Concomitant to the changes in the framework vibrational modes, the number of the O-H stretching vibrational modes of natrolite changes as a result of the rearrangements of the hydrogen bonds in the channels caused by a successive increase in the hydration level under hydrostatic pressure. Similar phase transitions were also observed at relatively higher pressures (1.13 and 1.59 GPa) under alcohol-water pressure medium. Furthermore, no phase transition was found up to 2.52 GPa if a lower volume ratio of the alcohol-water to natrolite was employed. This indicates that the water content in the pressure media plays a crucial role in triggering the pressure-induced phase transitions in natrolite. In addition, the average of the mode Grueneisen parameters is calculated to be about 0.6, while the thermodynamic Grueneisen parameter is found to be 1.33. This might be attributed to the contrast in the rigidity between the TO{sub 4} tetrahedral primary building units and other flexible secondary building units in the natrolite framework upon compression and subsequent water insertion.

  4. Investigation on gas medium parameters for an ArF excimer laser through orthogonal experimental design

    Science.gov (United States)

    Song, Xingliang; Sha, Pengfei; Fan, Yuanyuan; Jiang, R.; Zhao, Jiangshan; Zhou, Yi; Yang, Junhong; Xiong, Guangliang; Wang, Yu

    2018-02-01

    Due to complex kinetics of formation and loss mechanisms, such as ion-ion recombination reaction, neutral species harpoon reaction, excited state quenching and photon absorption, as well as their interactions, the performance behavior of different laser gas medium parameters for excimer laser varies greatly. Therefore, the effects of gas composition and total gas pressure on excimer laser performance attract continual research studies. In this work, orthogonal experimental design (OED) is used to investigate quantitative and qualitative correlations between output laser energy characteristics and gas medium parameters for an ArF excimer laser with plano-plano optical resonator operation. Optimized output laser energy with good pulse to pulse stability can be obtained effectively by proper selection of the gas medium parameters, which makes the most of the ArF excimer laser device. Simple and efficient method for gas medium optimization is proposed and demonstrated experimentally, which provides a global and systematic solution. By detailed statistical analysis, the significance sequence of relevant parameter factors and the optimized composition for gas medium parameters are obtained. Compared with conventional route of varying single gas parameter factor sequentially, this paper presents a more comprehensive way of considering multivariables simultaneously, which seems promising in striking an appropriate balance among various complicated parameters for power scaling study of an excimer laser.

  5. The effect of the external medium on the gravity-induced polarity of cytoplasmic streaming in Chara corallina (Characeae)

    Science.gov (United States)

    Staves, M. P.; Wayne, R.; Leopold, A. C.

    1997-01-01

    Gravity induces a polarity of cytoplasmic streaming in vertical internodal cells of Chara such that the downwardly directed stream moves faster than the upwardly directed stream. In order to determine whether the statolith theory (in which intracellular sedimenting particles are responsible for gravity sensing) or the gravitational pressure theory (in which the entire protoplast acts as the gravity sensor) best explain the gravity response in Chara internodal cells, we controlled the physical properties of the external medium, including density and osmolarity, with impermeant solutes and examined the effect on the polarity of cytoplasmic streaming. As the density of the external medium is increased, the polarity of cytoplasmic streaming decreases and finally disappears when the density of the external medium is equal to that of the cell (1015 kg/m3). A further increase in the density of the external medium causes a reversal of the gravity response. These results are consistent with the gravitational pressure theory of gravity sensing since the buoyancy of the protoplast is dependent on the difference between the density of the protoplast and the external medium, and are inconsistent with the statolith theory since the buoyancy of intracellular particles are unaffected by changes in the external medium.

  6. Low blood pressure

    Science.gov (United States)

    ... Low blood pressure can usually be treated with success. Possible Complications Falls due to low blood pressure ... ADAM Health Solutions. About MedlinePlus Site Map FAQs Customer Support Get email updates Subscribe to RSS Follow ...

  7. Atmospheric Pressure Indicator.

    Science.gov (United States)

    Salzsieder, John C.

    1995-01-01

    Discusses observable phenomena related to air pressure. Describes a simple, unobtrusive, semiquantitative device to monitor the changes in air pressure that are associated with altitude, using a soft-drink bottle and a balloon. (JRH)

  8. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  9. Pressure surge attenuator

    Science.gov (United States)

    Christie, Alan M.; Snyder, Kurt I.

    1985-01-01

    A pressure surge attenuation system for pipes having a fluted region opposite crushable metal foam. As adapted for nuclear reactor vessels and heads, crushable metal foam is disposed to attenuate pressure surges.

  10. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... increased? play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_ ...

  11. High blood pressure medications

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/007484.htm High blood pressure medicines To use the sharing features on this page, please enable JavaScript. Treating high blood pressure will help prevent problems such as heart disease, ...

  12. High blood pressure - children

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/007696.htm High blood pressure - children To use the sharing features on this page, please enable JavaScript. High blood pressure (hypertension) is an increase in the force of ...

  13. High Blood Pressure

    Science.gov (United States)

    ... Immunosuppressant medicines Anxiety, depression and mental health Kidney rejection Lifestyle changes Donate a kidney Being a living ... take a blood pressure medicine. There are many types of blood pressure medicine and you may need to take ...

  14. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from Hospital to ...

  15. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... L Sarah Harrison, OT Anne Bryden, OT The Role of the Social Worker after Spinal Cord Injury ... do to prevent pressure sores? play_arrow What role does diet and hydration play in preventing pressure ...

  16. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... to prevent pressure sores? play_arrow What is “skin tolerance” and how can it be ... play_arrow What role does diet and hydration play in preventing pressure sores among ...

  17. Preventing High Blood Pressure

    Science.gov (United States)

    ... Heart Disease Cholesterol Salt Million Hearts® WISEWOMAN Preventing High Blood Pressure: Healthy Living Habits Recommend on Facebook Tweet Share ... meal and snack options can help you avoid high blood pressure and its complications. Be sure to eat plenty ...

  18. High blood pressure - infants

    Science.gov (United States)

    Hypertension - infants ... and blood vessels The health of the kidneys High blood pressure in infants may be due to kidney or ... blood vessel of the kidney) In newborn babies, high blood pressure is often caused by a blood clot in ...

  19. Understanding Blood Pressure Readings

    Science.gov (United States)

    ... Artery Disease Venous Thromboembolism Aortic Aneurysm More Understanding Blood Pressure Readings Updated:Feb 19,2018 What do your ... this chart: English | Spanish | Traditional Chinese Enter Your Blood Pressure Systolic mm Hg (upper #) Diastolic mm Hg (lower #) ...

  20. Medium-Pressure Hydrogen-Oxygen Combustion Turbine Systems for Utilization of Industrial Waste Heat

    Science.gov (United States)

    Furutani, Hirohide; Uzunow, Nikolaj

    Recovery of waste heat is an effective means of achieving energy conservation, and the total amount of industrial waste heat is still notable. However, the value of waste heat as an energy source is low (low exergy). Its utilization therefore requires larger recovery systems with increased costs. The concept of introducing a second, high-quality heat source in the form of H2-O2 combustion in order to improve the system's performance is presented here. System analysis of the combination effect (higher output from combined than from separate sources) was conducted. The investigation results show that the systems under consideration have the potential for significant merits under moderate conditions. The proposed combination of low- and high-quality heat sources also permits reductions in the system size and cost.

  1. Direct measurements of the lifetime of medium-heavy hypernuclei

    Science.gov (United States)

    Qiu, X.; Tang, L.; Chen, C.; Margaryan, A.; Wood, S. A.; Achenbach, P.; Ahmidouch, A.; Albayrak, I.; Androic, D.; Asaturyan, A.; Asaturyan, R.; Ates, O.; Badui, R.; Baturin, P.; Boeglin, W.; Bono, J.; Brash, E.; Carter, P.; Chen, X.; Chiba, A.; Christy, M. E.; Dalton, M. M.; Danagoulian, S.; De Leo, R.; Doi, D.; Elaasar, M.; Ent, R.; Fenker, H.; Fujii, Y.; Furic, M.; Gabrielyan, M.; Gan, L.; Garibaldi, F.; Gaskell, D.; Gasparian, A.; Gogami, T.; Hashimoto, O.; Horn, T.; Hu, B.; Hungerford, Ed V.; Jones, M.; Kanda, H.; Kaneta, M.; Kawama, D.; Khanal, H.; Kohl, M.; Liyanage, A.; Luo, W.; Maeda, K.; Markowitz, P.; Marikyan, G.; Maruta, T.; Matsumura, A.; Maxwell, V.; Mkrtchyan, A.; Mkrtchyan, H.; Nagao, S.; Nakamura, S. N.; Narayan, A.; Neville, C.; Niculescu, G.; Niculescu, M. I.; Nunez, A.; Nuruzzaman; Okayasu, Y.; Petkovic, T.; Pochodzalla, J.; Reinhold, J.; Rodriguez, V. M.; Samanta, C.; Sawatzky, B.; Seva, T.; Shichijo, A.; Tadevosyan, V.; Taniya, N.; Tsukada, K.; Veilleux, M.; Vulcan, W.; Wesselmann, F. R.; Yamamoto, T.; Ye, Z.; Yokota, K.; Yuan, L.; Zhamkochyan, S.; Zhu, L.; HKS (JLab E02-017) Collaboration

    2018-05-01

    The lifetime of a Λ particle embedded in a nucleus (hypernucleus) decreases from that of free Λ decay mainly due to the opening of the ΛN → NN weak decay channel. However, it is generally believed that the lifetime of a hypernucleus attains a constant value (saturation) for medium to heavy hypernuclear masses, yet this hypothesis has been difficult to verify. This paper presents a direct measurement of the lifetime of medium-heavy hypernuclei that were hyper-fragments produced by fission or break-up from heavy hypernuclei initially produced with a 2.34 GeV photon-beam incident on thin Fe, Cu, Ag, and Bi target foils. For each event, fragments were detected in coincident pairs by a low-pressure multi-wire proportional chamber system. The lifetime was extracted from decay time spectrum formed by the difference of the time zeros between the pairs. The measured lifetime from each target is actually a statistical average over a range of mass with mean about 1/2 of the target mass and appears to be a constant of about 200 ps. Although this result cannot exclude unexpected shorter or longer lifetimes for some specific hypernuclei or hypernuclear states, it shows that a systematic decrease in lifetime as hypernuclear mass increases is not a general feature for hypernuclei with mean mass up to A ≈ 130. On the other hand, the success of this experiment and its technique shows that the time delayed fissions observed and used by all the lifetime measurements done so far on heavy hypernuclei could likely have originated from hyper-fragments lighter than the assumed masses.

  2. Modern gas-based temperature and pressure measurements

    CERN Document Server

    Pavese, Franco

    2013-01-01

    This 2nd edition volume of Modern Gas-Based Temperature and Pressure Measurements follows the first publication in 1992. It collects a much larger set of information, reference data, and bibliography in temperature and pressure metrology of gaseous substances, including the physical-chemical issues related to gaseous substances. The book provides solutions to practical applications where gases are used in different thermodynamic conditions. Modern Gas-Based Temperature and Pressure Measurements, 2nd edition is the only comprehensive survey of methods for pressure measurement in gaseous media used in the medium-to-low pressure range closely connected with thermometry. It assembles current information on thermometry and manometry that involve the use of gaseous substances which are likely to be valid methods for the future. As such, it is an important resource for the researcher. This edition is updated through the very latest scientific and technical developments of gas-based temperature and pressure measurem...

  3. Effects of post heat-treatment on surface characteristics and adhesive bonding performance of medium density fiberboard

    Science.gov (United States)

    Nadir Ayrilimis; Jerrold E. Winandy

    2009-01-01

    A series of commercially manufactured medium density fiberboard (MDF) panels were exposed to a post-manufacture heat-treatment at various temperatures and durations using a hot press and just enough pressure to ensure firm contact between the panel and the press platens. Post-manufacture heat-treatment improved surface roughness of the exterior MDF panels. Panels...

  4. High-pressure microbiology

    National Research Council Canada - National Science Library

    Michiels, Chris; Bartlett, Douglas Hoyt; Aertsen, Abram

    2008-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. High Hydrostatic Pressure Effects in the Biosphere: from Molecules to Microbiology * Filip Meersman and Karel Heremans . . . . . . . . . . . . 2. Effects...

  5. PRESSURE SYSTEM CONTROL

    Science.gov (United States)

    Esselman, W.H.; Kaplan, G.M.

    1961-06-20

    The control of pressure in pressurized liquid systems, especially a pressurized liquid reactor system, may be achieved by providing a bias circuit or loop across a closed loop having a flow restriction means in the form of an orifice, a storage tank, and a pump connected in series. The subject invention is advantageously utilized where control of a reactor can be achieved by response to the temperature and pressure of the primary cooling system.

  6. Tunable high pressure lasers

    Science.gov (United States)

    Hess, R. V.

    1976-01-01

    Atmospheric transmission of high energy CO2 lasers is considerably improved by high pressure operation which, due to pressure broadening, permits tuning the laser lines off atmospheric absorption lines. Pronounced improvement is shown for horizontal transmission at altitudes above several kilometers and for vertical transmission through the entire atmosphere. Applications of tunable high pressure CO2 lasers to energy transmission and to remote sensing are discussed along with initial efforts in tuning high pressure CO2 lasers.

  7. Pressure dependence of conductivity

    International Nuclear Information System (INIS)

    Bracewell, B.L.; Hochheimer, H.D.

    1993-01-01

    The overall objectives of this work were to attempt the following: (1) Measure the pressure dependence of the electrical conductivity of several quasi-one-dimensional, charge-density-wave solids, including measurements along various crystal directions. (2) Measure photocurrents in selected MX solids at ambient and elevated pressures. (3) Measure the resonance Raman spectra for selected MX solids as a function of pressure

  8. High-pressure apparatus

    NARCIS (Netherlands)

    Schepdael, van L.J.M.; Bartels, P.V.; Berg, van den R.W.

    1999-01-01

    The invention relates to a high-pressure device (1) having a cylindrical high-pressure vessel (3) and prestressing means in order to exert an axial pressure on the vessel. The vessel (3) can have been formed from a number of layers of composite material, such as glass, carbon or aramide fibers which

  9. Exchange market pressure

    NARCIS (Netherlands)

    Jager, H.; Klaassen, F.; Durlauf, S.N.; Blume, L.E.

    2010-01-01

    Currencies can be under severe pressure in the foreign exchange market, but in a fixed (or managed) exchange rate regime that is not fully visible via the change in the exchange rate. Exchange market pressure (EMP) is a concept developed to nevertheless measure the pressure in such cases. This

  10. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... a pressure sore? play_arrow What are the causes of pressure sores in people with spinal cord injuries? play_arrow Why are pressure sores so serious? play_arrow What is "sepsis," and why is it dangerous? play_arrow How ...

  11. Positive airway pressure treatment

    Science.gov (United States)

    ... and depression and a better mood Normal sleep patterns Lower blood pressure (in people with high blood pressure) Your health care provider will prescribe the type of PAP machine that ... patterns. Bilevel positive airway pressure (BiPAP or BIPAP) has ...

  12. High Blood Pressure

    Science.gov (United States)

    ... effects on blood pressure. Finding out what genetic patterns contribute to high blood pressure risk. NHLBI-funded researchers identified dozens of ... whether a low-sodium and low-calorie eating pattern, along with aerobic exercise, can improve blood pressure in patients who do not respond to ...

  13. Natural Circulation Capability Assessments for a Small-medium Reactor

    International Nuclear Information System (INIS)

    Choi, Sun Do

    2010-02-01

    Small-medium reactors have been highly evaluated to have more safe characteristics than those of large reactors. In addition, it could be used for a variety of purposes, such as small-scale power production in mountainous of island area, seawater desalination, regional heating system. For a higher safety, studies about a way of using natural circulation have being conducted around world. CAREM(Argentina), AST- 500(Russia), and NHR-200(china) etc. According to this tendency, REX- 10(Regional Energy rX-10) is designed in Korea for regional heating and small-scale power production. To investigate the thermal-hydraulic behavior of REX-10, we designed Rex-10 Test Facility (RTF), simulating REX-10, by using the scaling law. The scaling ratios of length, volume and power were set with 1/1, 1/50 and 1/50, respectively. The diameter and total length of RTF are 40 cm and approximately 6 m, respectively. The facility is composed of various components, which are a core in the bottom part, a heat exchanger in the middle part, a pressurizer and hot legs in the upper part, and chillers outside the facility. The test instrumentation is also designed to measure temperatures, flow rates, pressures, and pressure drop. The experiment parameters were adopted based on the 1-dimensional approach. There are a variety of parameters which influence natural circulation behavior such as heater power, overall flow resistance parameter, the distance between the center of the heat exchanger and the core. As the experimental geometries are fixed, it is found that the most important parameter is the heater power under the experimental conditions. In addition, to evaluate the effect of heater power, some experiments were conducted at varying heater power condition (from 70 kW to 170 kW) under constant primary pressure (2.0 MPa) and secondary flow rate (4.5 liter per minute). As the results of the experiments, the temperature and flow rate increase with increasing heater power. The flow rate is

  14. Flow of an aqueous foam through a two-dimensional porous medium: a pore scale investigation

    Science.gov (United States)

    Meheust, Y.; Jones, S. A.; Dollet, B.; Cox, S.; Cantat, I.

    2012-12-01

    Flowing foams are used in many engineering and technical applications. A well-known application is oil recovery. Another one is the remediation of polluted soil: the foam is injected into the ground in order to mobilize chemical species present in the medium. Apart from potential interesting physico-chemical and biochemical properties, foams have peculiar flow properties that might be of benefit to the application. We address here this physical aspect of the topic. As a precursor to the study of foam flow through a complex porous material, we first study the behavior of an aqueous two-dimensional foam flowing through a medium consisting of two parallel channels with different widths, at fixed medium porosity, that is, at fixed total combined width of the two channels. The flow velocity, and hence flux, in each channel is measured by analyzing images of the flowing foam. It is then compared to a theoretical model, the basic assumption of which is that the pressure drop along a channel is identical for both channels. This pressure drop both consists of (i) a dynamic pressure drop, which is controlled by bubble-wall friction and depends on the foam velocity in the channel, and (ii) a capillary pressure drop over the bubble films that emerge at the channel outlet, the latter pressure drop being controlled by the radius of curvature of the bubble film. Based on this assumption, the dependence of the ratio of the foam velocities in the two channels is inferred as a function of the channel width ratio. It compares well to the measurements and shows that the flow behavior is highly dependent on the foam structure within the narrowest of the two channels, especially when a "bamboo" structure is obtained. Consequently, the flux in a channel is found to have a more complicated relation to the channel width than expected for the flow of a standard Newtonian fluid in the same geometry. We provide a comparison to this reference configuration. We then study the flow of the same

  15. Pressure ulcer prevention.

    Science.gov (United States)

    Edlich, Richard F; Winters, Kathryne L; Woodard, Charles R; Buschbacher, Ralph M; Long, William B; Gebhart, Jocelynn H; Ma, Eva K

    2004-01-01

    The purpose of this collective review is to outline the predisposing factors in the development of pressure ulcers and to identify a pressure ulcer prevention program. The most frequent sites for pressure ulcers are areas of skin overlying bony prominences. There are four critical factors contributing to the development of pressure ulcers: pressure, shearing forces, friction, and moisture. Pressure is now viewed as the single most important etiologic factor in pressure ulcer formation. Prolonged immobilization, sensory deficit, circulatory disturbances, and poor nutrition have been identified as important risk factors in the development of pressure ulcer formation. Among the clinical assessment scales available, only two, the Braden Scale and Norton Scale, have been tested extensively for reliability and/or validity. The most commonly used risk assessment tools for pressure ulcer formation are computerized pressure monitoring and measurement of laser Doppler skin blood flow. Pressure ulcers can predispose the patient to a variety of complications that include bacteremia, osteomyelitis, squamous cell carcinoma, and sinus tracts. The three components of pressure ulcer prevention that must be considered in any patient include management of incontinence, nutritional support, and pressure relief. The pressure relief program must be individualized for non-weight-bearing individuals as well as those that can bear weight. For those that can not bear weight and passively stand, the RENAISSANCE Mattress Replacement System is recommended for the immobile patient who lies supine on the bed, the stretcher, or operating room table. This alternating pressure system is unique because it has three separate cells that are not interconnected. It is specifically designed so that deflation of each individual cell will reach a ZERO PRESSURE during each alternating pressure cycle. The superiority of this system has been documented by comprehensive clinical studies in which this system

  16. Monitoring operational conditions of vehicle tyre pressure levels and ...

    African Journals Online (AJOL)

    Compliance with vehicle tyre inflation pressure and tread depth standard specifications and legal requirements were monitored by survey study in Kumasi Metropolis, Ghana. The survey covered 400 vehicles, comprising cars (28 %), medium buses (25 %), large capacity buses (15 %) and trucks (32 %). There were wide ...

  17. Population pressures in Latin America.

    Science.gov (United States)

    Merrick, T W; Kent, M M; Van Der Tak, J; Von Cube, A

    1986-07-01

    In 1950 Latin America's population of 165 million was on a par with the 166 million of North America. 2 decades of growth at nearly 3% a year pushed the total to 405 million in 1985, vs. 264 million in North America. Despite substantial fertility declines since the 1960s, continued growth is ensured by the demographic momentum built into the region's large and youthful population bases. UN medium projections put the 2025 total at 779 million, compared to 345 million in North America. This Bulletin examines the main demographic changes in Latin America since World War II and their links to economic and social changes in the region as well as their implications for international and social relations. The post World War II population surge was accompanied by massive rural-ruban and international migration, rapid urbanization, large labor shifts out of agriculture into industry and services, increased education for both men and women, and higher labor force participation for females. The rural exodus was spurred by extreme land tenure inequalities and the urban bias of postwar industrialization. The labor-saving bias of this industrialization forced exploding city populations to turn to the informal sector for jobs. Population pressures on city services and housing as well as jobs have been further exacerbated by overconcentration in a few large cities and economic downturns of the 1980s. Recent fertility declines seem to be the result of both increased access to family planning and the economic and social pressures posed by the gap between young adults' aspirations and their ability to realize them. Population and economic pressures could induce faster fertility declines than now projected but in the short run are likely to mean more employment problems, continued rapid urban growth, and even larger international immigration flows within the hemisphere, particularly to the US.

  18. Medium energy hadron scattering from nuclei

    International Nuclear Information System (INIS)

    Ginocchio, J.N.; Wenes, G.

    1986-01-01

    The Glauber approximation for medium energy scattering of hadronic projectiles from nuclei is combined with the interacting boson model of nuclei to produce a transition matrix for elastic and inelastic scattering in algebraic form which includes coupling to all the intermediate states. We present closed form analytic expresions for the transition matrix elements for the three dynamical symmetries of the interacting boson model; that is for, a spherical quadrupole vibrator, a γ unstable rotor, and both prolate and oblate axially symmetric rotors. We give examples of application of this formalism to proton scattering from 154 Sm and 154 Gd. 27 refs., 5 figs., 1 tab

  19. Superluminous laser pulse in an active medium

    International Nuclear Information System (INIS)

    Fisher, D.L.; Tajima, T.

    1993-12-01

    Physical conditions are obtained to make the propagation velocity of a laser pulse and thus the phase velocity of the excited wake be at any desired value, including that equal to or greater than the speed of light. The provision of an active-plasma laser medium with an appropriately shaped pulse allows not only replenishment of laser energy loss to the wakefield but also acceleration of the group velocity of photons. A stationary solitary solution in the accelerated frame is obtained from the model equations and simulations thereof for the laser, plasma and atoms. This approach has applications in photonics and telecommunications as well as wakefield accelerators

  20. Cooperative networking in a heterogeneous wireless medium

    CERN Document Server

    Ismail, Muhammad

    2013-01-01

    This brief focuses on radio resource allocation in a heterogeneous wireless medium. It presents radio resource allocation algorithms with decentralized implementation, which support both single-network and multi-homing services. The brief provides a set of cooperative networking algorithms, which rely on the concepts of short-term call traffic load prediction, network cooperation, convex optimization, and decomposition theory. In the proposed solutions, mobile terminals play an active role in the resource allocation operation, instead of their traditional role as passive service recipients in the networking environment.

  1. A medium energy neutron deep penetration experiment

    International Nuclear Information System (INIS)

    Amian, W.; Cloth, P.; Druecke, V.; Filges, D.; Paul, N.; Schaal, H.

    1986-11-01

    A deep penetration experiment conducted at the Los Alamos WNR facility's Spallation Neutron Target is compared with calculations using intra-nuclear-cascade and S N -transport codes installed at KFA-IRE. In the experiment medium energy reactions induced by neutrons between 15 MeV and about 150 MeV inside a quasi infinite slab of iron have been measured using copper foil monitors. Details of the experimental procedure and the theoretical methods are described. A comparison of absolute reaction rates for both experimentally and theoretically derived reactions is given. The present knowledge of the corresponding monitor reaction cross sections is discussed. (orig.)

  2. Electromagnetically Induced Transparency In Rydberg Atomic Medium

    Science.gov (United States)

    Deng, Li; Cong, Lu; Chen, Ai-Xi

    2018-03-01

    Due to possessing big principal quantum number, Rydberg atom has some unique properties, for example: its radiative lifetime is long, dipole moment is large, and interaction between atoms is strong and so on. These properties make one pay attention to Rydberg atoms. In this paper we investigate the effects of Rydberg dipole-dipole interactions on electromagnetically induced transparency (EIT) schemes and group velocity in three-level systems of ladder type, which provides theoretical foundation for exploring the linear and nonlinear characteristics of light in a Rydberg electromagnetically-induced-transparency medium.

  3. Adiabatic supernova expansion into the circumstellar medium

    International Nuclear Information System (INIS)

    Band, D.L.; Liang, E.P.

    1987-01-01

    We perform one dimensional numerical simulations with a Lagrangian hydrodynamics code of the adiabatic expansion of a supernova into the surrounding medium. The early expansion follows Chevalier's analytic self-similar solution until the reverse shock reaches the ejecta core. We follow the expansion as it evolves towards the adiabatic blast wave phase. Some memory of the earlier phases of expansion is retained in the interior even when the outer regions expand as a blast wave. We find the results are sensitive to the initial configuration of the ejecta and to the placement of gridpoints. 6 refs., 2 figs

  4. Photodegradation of organophosphorus pesticides in honey medium.

    Science.gov (United States)

    Yuan, Zhimin; Yao, Jun; Liu, Haijun; Han, Jun; Trebše, Polonca

    2014-10-01

    Honey can be polluted due to environmental pollution and misuse of beekeeping practices. In the present study, photodegradation experiments of organophosphorus pesticides (coumaphos, methyl parathion and fenitrothion) in honey medium were conducted using Atlas Suntest simulator CPS+ as a sunlight producer. Photodegradation experiments were conducted under three different intensities as 250W/m(2), 500W/m(2) and 750W/m(2) to evaluate the impact of sunlight intensity on removal of OPs in honey medium. Significant decreases of three OPs' concentrations were observed. Coumaphos showed the highest degradability, reaching a degradation percentage of 90 percent within 15min. After 1h irradiation, residual percentages of coumaphos were 6.62 percent for 250W/m(2), 3.48 percent for 500W/m(2) and 2.98 percent for 750W/m(2), respectively. Methyl parathion and fenitrothion also could be removed through photodegradation efficiently. After 1h irradiation, the residual percentages of methyl parathion and fenitrothion under 750W/m(2) sunlight irradiation were 26.89 percent and 16.70 percent, respectively. Intensity of sunlight showed a positive impact on removal of OPs in honey medium. The higher intensity, the lower residual percentage. Photodegradation of three OPs fitted well with pseudo-first order kinetics. Half-lives calculated from pseudo-first order kinetics were 17.61min (250W/m(2)), 16.67min (500W/m(2)) and 17.58min (750W/m(2)) for coumaphos, 57.62min (250W/m(2)), 34.13min (500W/m(2)) and 31.69min (750W/m(2)) for methyl parathion and 144.70min (250W/m(2)), 95.47min (500W/m(2)) and 22.57min (750W/m(2)) for fenitrothion, respectively. Most of the three OPs could dissipate in a short time under sunlight irradiation. Photodegradation could be accepted as an appropriate method for the removal of OPs in honey medium. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. Electromagnetic properties of neutrinos in a medium

    International Nuclear Information System (INIS)

    Nieves, J.F.; Pal, P.B.

    1989-01-01

    We show that, contrary to the situation in the vacuum, a Majorana neutrino can have electric and magnetic dipole moments in a medium. This is because of new contributions, equal for a particle and its antiparticle, that can arise only in a material background. For Dirac neutrinos, these contributions make the magnitudes of the dipole moments of the particle and the antiparticle unequal. We discuss the conditions which give rise to such effects, with particular attention to the role played by the discrete symmetries C, P, and T

  6. Polyelectrolyte as solvent and reaction medium.

    Science.gov (United States)

    Prescher, Simon; Polzer, Frank; Yang, Yan; Siebenbürger, Miriam; Ballauff, Matthias; Yuan, Jiayin

    2014-01-08

    A poly(ionic liquid) with a rather low glass transition temperature of -57°C was synthesized via free radical polymerization of an acrylate-type ionic liquid monomer. It exhibits fluidic behavior in a wide temperature range from room temperature to the threshold of the thermal decomposition. We demonstrate that it could act as a unique type of macromolecular solvent to dissolve various compounds and polymers and separate substances. In addition, this polyelectrolyte could serve successfully as reaction medium for catalysis and colloid particle synthesis. The synergy in the solvation and stabilization properties is a striking character of this polymer to downsize the in situ generated particles.

  7. Relativistic energy loss in a dispersive medium

    DEFF Research Database (Denmark)

    Houlrik, Jens Madsen

    2002-01-01

    The electron energy loss in a dispersive medium is obtained using macroscopic electrodynamics taking advantage of a static frame of reference. Relativistic corrections are described in terms of a dispersive Lorentz factor obtained by replacing the vacuum velocity c by the characteristic phase...... velocity c/n, where n is the complex index of refraction. The angle-resolved energy-loss spectrum of a Drude conductor is analyzed in detail and it is shown that the low-energy peak due to Ohmic losses is enhanced compared to the classical approximation....

  8. Bildung in the Digital Medium Environment

    DEFF Research Database (Denmark)

    Tække, Jesper; Paulsen, Michael Eric

    We are living in a period where new social structures arise in the communicative space and wake of digital media. This means that we must try to adapt to a changing social world within all social arenas like economy, work-life, love relations and last but not least education. The question...... of this paper is what Bildung should be or could be within this new medium environment. It draws on Luhmann (2006), Biesta (2006), Klafki (2014) and Kant (1784) describing what Bildung is seen from the view of the enlightenment tradition and try to discuss and analyze how ideas of Bildung could be used...

  9. Distributed medium access control in wireless networks

    CERN Document Server

    Wang, Ping

    2013-01-01

    This brief investigates distributed medium access control (MAC) with QoS provisioning for both single- and multi-hop wireless networks including wireless local area networks (WLANs), wireless ad hoc networks, and wireless mesh networks. For WLANs, an efficient MAC scheme and a call admission control algorithm are presented to provide guaranteed QoS for voice traffic and, at the same time, increase the voice capacity significantly compared with the current WLAN standard. In addition, a novel token-based scheduling scheme is proposed to provide great flexibility and facility to the network servi

  10. The question of caution in professional medium

    International Nuclear Information System (INIS)

    Godard, O.

    2006-01-01

    Contrived in Europe to tackle the environment protection policies and management of natural resources, the principle of caution has seen since 1990 its interest developed towards the fields of food safety and public health. The importance and the relevance of questions have lead the national institute of research and safety to constitute a working group to explore the problems and the potentialities that could be linked to the explicit introduction of this principle and this in the field of the prevention of professional risks. This work tackles several aspects of the question of caution in professional medium such history, concepts, evolution...as well as cases judged exemplary ones. (N.C.)

  11. The Casimir effect: medium and geometry

    International Nuclear Information System (INIS)

    Marachevsky, Valery N

    2012-01-01

    Theory of the Casimir effect is presented in several examples. Casimir–Polder-type formulas, Lifshitz theory and theory of the Casimir effect for two gratings separated by a vacuum slit are derived. Equations for the electromagnetic field in the presence of a medium and dispersion are discussed. The Casimir effect for systems with a layer of 2 + 1 fermions is studied. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical in honour of Stuart Dowker's 75th birthday devoted to ‘Applications of zeta functions and other spectral functions in mathematics and physics’. (paper)

  12. Heat Transfer in a Semitransparent Medium

    Science.gov (United States)

    Shamparov, E. Yu.

    2018-01-01

    The problem of 1D radiative-conductive heat transfer in a homogeneous isotropic gray medium near a planar diffuse nontransparent surface and in between parallel plates with different temperatures has been solved analytically. Nonconvective measurements of the thermal resistance of parallel-plane polyethylene foam specimens versus the number of layers (i.e., thickness) have been taken, both without and with thin screens made of aluminum foil. The applicability of the suggested theoretical approach and experimental technique for the measurement of radiative heat transfer and heat transfer by conduction in light heat-protective materials has been demonstrated.

  13. Interactions between intergalactic medium and galaxies

    International Nuclear Information System (INIS)

    Einasto, J.; Saar, E.

    1977-01-01

    The interaction of galaxies with the environmental gas both in clusters and in small groups of galaxies is investigated. Interaction between galaxies and the ambient medium can be considered simply as final touches in the process of galaxy formation. Large relative velocities of galaxies in their clusters and of the intercluster gas result in a loss of the intergalactic gas, that in its turn affects the morphology of cluster galaxies. Interaction between the coronal clouds and the gas in the disk of spiral galaxies may result in regular patterns of star formation and in the bending of planes of galaxies

  14. Cobalt ferrite nanoparticles under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Saccone, F. D.; Ferrari, S.; Grinblat, F.; Bilovol, V. [Instituto de Tecnologías y Ciencias de la Ingeniería, “Ing. H. Fernández Long,” Av. Paseo Colón 850 (1063), Buenos Aires (Argentina); Errandonea, D., E-mail: daniel.errandonea@uv.es [Departamento de Fisica Aplicada, Institut Universitari de Ciència dels Materials, Universitat de Valencia, c/ Doctor Moliner 50, E-46100 Burjassot, Valencia (Spain); Agouram, S. [Departamento de Física Aplicada y Electromagnetismo, Universitat de València, 46100 Burjassot, Valencia (Spain)

    2015-08-21

    We report by the first time a high pressure X-ray diffraction and Raman spectroscopy study of cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles carried out at room temperature up to 17 GPa. In contrast with previous studies of nanoparticles, which proposed the transition pressure to be reduced from 20–27 GPa to 7.5–12.5 GPa (depending on particle size), we found that cobalt ferrite nanoparticles remain in the spinel structure up to the highest pressure covered by our experiments. In addition, we report the pressure dependence of the unit-cell parameter and Raman modes of the studied sample. We found that under quasi-hydrostatic conditions, the bulk modulus of the nanoparticles (B{sub 0} = 204 GPa) is considerably larger than the value previously reported for bulk CoFe{sub 2}O{sub 4} (B{sub 0} = 172 GPa). In addition, when the pressure medium becomes non-hydrostatic and deviatoric stresses affect the experiments, there is a noticeable decrease of the compressibility of the studied sample (B{sub 0} = 284 GPa). After decompression, the cobalt ferrite lattice parameter does not revert to its initial value, evidencing a unit cell contraction after pressure was removed. Finally, Raman spectroscopy provides information on the pressure dependence of all Raman-active modes and evidences that cation inversion is enhanced by pressure under non-hydrostatic conditions, being this effect not fully reversible.

  15. (ajst) activation of cyclopentane in aqueous medium

    African Journals Online (AJOL)

    opiyo

    The irradiation of the solutions have been carried out at 436- nm wavelength using a high pressure mercury lamp for the light source. Cyclopentanol and cyclopentanone have been obtained as organic products. The products were detected and characterized using gas chromatography and mass spectrometry methods.

  16. Pressure (Or No Royal Road)

    Science.gov (United States)

    Bradley, J.

    1973-01-01

    Discusses how difficult the various problems of pressure, partial pressure, gas laws, and vapor pressure are for students. Outlines the evolution of the concept of pressure, the gas equation for a perfect gas, partial pressures, saturated vapor pressure, Avogadro's hypothesis, Raoult's law, and the vapor pressure of ideal solutions. (JR)

  17. Pressure locking test results

    International Nuclear Information System (INIS)

    DeWall, K.G.; Watkins, J.C.; McKellar, M.G.; Bramwell, D.

    1996-01-01

    The U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Regulatory Research, is funding the Idaho National Engineering Laboratory (INEL) in performing research to provide technical input for their use in evaluating responses to Generic Letter 95-07, open-quotes Pressure Locking and Thermal Binding of Safety-Related Power-Operated Gate Valves.close quotes Pressure locking and thermal binding are phenomena that make a closed gate valve difficult to open. This paper discusses only the pressure locking phenomenon in a flexible-wedge gate valve; we will publish the results of our thermal binding research at a later date. Pressure locking can occur when operating sequences or temperature changes cause the pressure of the fluid in the bonnet (and, in most valves, between the discs) to be higher than the pressure on the upstream and downstream sides of the disc assembly. This high fluid pressure presses the discs against both seats, making the disc assembly harder to unseat than anticipated by the typical design calculations, which generally consider friction at only one of the two disc/seat interfaces. The high pressure of the bonnet fluid also changes the pressure distribution around the disc in a way that can further contribute to the unseating load. If the combined loads associated with pressure locking are very high, the actuator might not have the capacity to open the valve. The results of the NRC/INEL research discussed in this paper show that the relationship between bonnet pressure and pressure locking stem loads appears linear. The results also show that for this valve, seat leakage affects the bonnet pressurization rate when the valve is subjected to thermally induced pressure locking conditions

  18. Pressure locking test results

    Energy Technology Data Exchange (ETDEWEB)

    DeWall, K.G.; Watkins, J.C.; McKellar, M.G.; Bramwell, D. [Idaho National Engineering Lab., Idaho Falls, ID (United States)] [and others

    1996-12-01

    The U.S. Nuclear Regulatory Commission (NRC), Office of Nuclear Regulatory Research, is funding the Idaho National Engineering Laboratory (INEL) in performing research to provide technical input for their use in evaluating responses to Generic Letter 95-07, {open_quotes}Pressure Locking and Thermal Binding of Safety-Related Power-Operated Gate Valves.{close_quotes} Pressure locking and thermal binding are phenomena that make a closed gate valve difficult to open. This paper discusses only the pressure locking phenomenon in a flexible-wedge gate valve; the authors will publish the results of their thermal binding research at a later date. Pressure locking can occur when operating sequences or temperature changes cause the pressure of the fluid in the bonnet (and, in most valves, between the discs) to be higher than the pressure on the upstream and downstream sides of the disc assembly. This high fluid pressure presses the discs against both seats, making the disc assembly harder to unseat than anticipated by the typical design calculations, which generally consider friction at only one of the two disc/seat interfaces. The high pressure of the bonnet fluid also changes the pressure distribution around the disc in a way that can further contribute to the unseating load. If the combined loads associated with pressure locking are very high, the actuator might not have the capacity to open the valve. The results of the NRC/INEL research discussed in this paper show that the relationship between bonnet pressure and pressure locking stem loads appears linear. The results also show that for this valve, seat leakage affects the bonnet pressurization rate when the valve is subjected to thermally induced pressure locking conditions.

  19. Cosmic-Ray Feedback Heating of the Intracluster Medium

    Energy Technology Data Exchange (ETDEWEB)

    Ruszkowski, Mateusz [Department of Astronomy, University of Michigan, 1085 South University Avenue, 311 West Hall, Ann Arbor, MI 48109 (United States); Yang, H.-Y. Karen; Reynolds, Christopher S., E-mail: mateuszr@umich.edu, E-mail: hsyang@astro.umd.edu, E-mail: chris@astro.umd.edu [Department of Astronomy, University of Maryland, College Park, MD 20742 (United States)

    2017-07-20

    Active galactic nuclei (AGNs) play a central role in solving the decades-old cooling-flow problem. Although there is consensus that AGNs provide the energy to prevent catastrophically large star formation, one major problem remains: How is the AGN energy thermalized in the intracluster medium (ICM)? We perform a suite of three-dimensional magnetohydrodynamical adaptive mesh refinement simulations of AGN feedback in a cool core cluster including cosmic rays (CRs). CRs are supplied to the ICM via collimated AGN jets and subsequently disperse in the magnetized ICM via streaming, and interact with the ICM via hadronic, Coulomb, and streaming instability heating. We find that CR transport is an essential model ingredient at least within the context of the physical model considered here. When streaming is included, (i) CRs come into contact with the ambient ICM and efficiently heat it, (ii) streaming instability heating dominates over Coulomb and hadronic heating, (iii) the AGN is variable and the atmosphere goes through low-/high-velocity dispersion cycles, and, importantly, (iv) CR pressure support in the cool core is very low and does not demonstrably violate observational constraints. However, when streaming is ignored, CR energy is not efficiently spent on the ICM heating and CR pressure builds up to a significant level, creating tension with the observations. Overall, we demonstrate that CR heating is a viable channel for the AGN energy thermalization in clusters and likely also in ellipticals, and that CRs play an important role in determining AGN intermittency and the dynamical state of cool cores.

  20. A Prediction Model of the Capillary Pressure J-Function.

    Directory of Open Access Journals (Sweden)

    W S Xu

    Full Text Available The capillary pressure J-function is a dimensionless measure of the capillary pressure of a fluid in a porous medium. The function was derived based on a capillary bundle model. However, the dependence of the J-function on the saturation Sw is not well understood. A prediction model for it is presented based on capillary pressure model, and the J-function prediction model is a power function instead of an exponential or polynomial function. Relative permeability is calculated with the J-function prediction model, resulting in an easier calculation and results that are more representative.

  1. High-pressure-low-temperature x-ray power diffractometer.

    Science.gov (United States)

    Syassen, K; Holzapfel, W B

    1978-08-01

    A high-pressure technique for x-ray diffraction studies at low temperatures is described. The system consists of a Bridgman anvil type high-pressure device with either tungsten carbide or boron carbide anvils, a liquid He cryostat, and x-ray diffractometer operating in Debye-Scherrer geometry. The newly developed boron carbide anvil cell is capable of containing a liquid pressure transmitting medium. The precision of the lattice parameter determination is discussed and the effect of nonisostatic stress components on the diffraction pattern is examined.

  2. Filamentary fragmentation in a turbulent medium

    Science.gov (United States)

    Clarke, S. D.; Whitworth, A. P.; Duarte-Cabral, A.; Hubber, D. A.

    2017-06-01

    We present the results of smoothed particle hydrodynamic simulations investigating the evolution and fragmentation of filaments that are accreting from a turbulent medium. We show that the presence of turbulence and the resulting inhomogeneities in the accretion flow play a significant role in the fragmentation process. Filaments that experience a weakly turbulent accretion flow fragment in a two-tier hierarchical fashion, similar to the fragmentation pattern seen in the Orion Integral Shaped Filament. Increasing the energy in the turbulent velocity field results in more sub-structure within the filaments, and one sees a shift from gravity-dominated fragmentation to turbulence-dominated fragmentation. The sub-structure formed in the filaments is elongated and roughly parallel to the longitudinal axis of the filament, similar to the fibres seen in observations of Taurus, and suggests that the fray and fragment scenario is a possible mechanism for the production of fibres. We show that the formation of these fibre-like structures is linked to the vorticity of the velocity field inside the filament and the filament's accretion from an inhomogeneous medium. Moreover, we find that accretion is able to drive and sustain roughly sonic levels of turbulence inside the filaments, but is not able to prevent radial collapse once the filaments become supercritical. However, the supercritical filaments that contain fibre-like structures do not collapse radially, suggesting that fibrous filaments may not necessarily become radially unstable once they reach the critical line-density.

  3. Dielectrophoresis of spermatozoa in viscoelastic medium.

    Science.gov (United States)

    Koh, James Boon Yong; Marcos

    2015-07-01

    Knowledge of spermatozoa motility is important in selecting suitable spermatozoa for assisted reproduction procedures. By considering the internal sliding force within an active filament, its shape in a viscoelastic Oldroyd-B fluid subjected to nonuniform electric field is presented. The resulting velocity is a function of the beating pattern and DEP force, which is dependent on the spermatozoon's morphology as well as the gradient of the mean square electric field. Finally, the velocities of the X- and Y-spermatozoa are compared under various conditions of nonuniform electric field and viscoelasticity of the medium. The presence of DEP force alters their velocities to different extents, giving an 84% level of confidence for selecting spermatozoon that contains the chromosome leading to a female. Therefore, a nonuniform electric field can be used not only to sort and select spermatozoa of desired morphology, but also for gender selection. Moreover, we found that sorting in a viscoelastic fluid medium is more effective as the effect of DEP on the spermatozoa velocity is enhanced by an order of magnitude. © 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. INNOVATIVE CULTURE IN SMALL AND MEDIUM ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Aluisio Broering Mambrini

    2011-10-01

    Full Text Available In the last two decades, innovation has been a key driver of economic growth. Innovation is closely related to creating value and generating wealth through successful service to consumer needs. Thus, it is not necessarily restricted to the use of new knowledge generated from research, but on the development of new products or services that are obtained with creative use of knowledge, new or already known. This study aimed to identify management practices that promote a culture of innovation in small and medium enterprises and analyze how they contribute to the innovative capacity of these companies. The research method was the multiple case study with six small and medium businesses that have at least one case of significant innovation in its history. The main results showed that amongst the practices are: a performance in highly specialized niches and deep focus on customer needs; b strong investment and incorporation of new knowledge outside the company (open innovation; c speed and agility in the absorption and deployment of new knowledge and technologies; d retention of employees; e acting as an integrator combining diverse knowledge and technologies; f the information management of the knowledge acquired by the company; g little concern to patent the technology; h flexibility and informal, fluid and open communication between employees of the company that promotes agility in management and i the management of partnerships across the value chain, including the functional areas.

  5. Medium-size power plants. Economic options

    International Nuclear Information System (INIS)

    Vogelweith, L.; Baujat, J.; Goutail, J.

    1978-01-01

    In this paper the authors describe a method for economic evaluation of a nuclear power plant project such as advocated by the IAEA but modified through the introduction of various parameters that may affect the evaluation, i.e. the weighted evaluation rate, the annual increase in the cost of fuel, and the discount rate. The method is applied to barge-based medium-size reactors (125 MW(e)). The authors calculate the investment cost, together with the costs of administration, operation and maintenance; use is made of current assumptions regarding the price of fuel for the case of a reference nuclear plant and an oil-fired plant of the same power and in the same programme. In this way the authors derive the discounted cost of the nuclear programme and concurrent conventional programme on the basis of the following assumptions: a weighted inflation rate varying between 0 and 6% per year; an annual increase in real fuel prices ranging from 0 to 3%; and a real discount rate, equal to the real interest rate, varying between 4 and 7% per year and corresponding to nominal discount rates of up to 13.4%. The conclusion reached is that, given the real interest rates actually prevailing on the financial market, a weighted inflation rate foreseen by the majority of experts, and a rise in real fuel prices of the order of 1% per year, the medium-size nuclear power plant is more economical than a conventional plant of the same output. (author)

  6. Shock propagation in a heterogeneous medium

    International Nuclear Information System (INIS)

    Elbaz, D.

    2011-01-01

    In the frame of the inertial confinement fusion in direct drive, the use of foams as ablator allows the reduction of hydrodynamic instabilities created on the target by the direct laser irradiation. The foam is made up of carbon (CH) fibers impregnated of cryogenic deuterium-tritium (DT). In the past, studies have been carried out considering this foam to be a homogeneous medium. Yet, the foam presents heterogeneous features. We study the effects of this heterogeneity on the shock velocity when the laser irradiates the target. Thanks to experimental and numerical studies, we show that the shock propagates faster in the heterogeneous medium than in the homogeneous one with the same averaged density. This velocity gap depends on the presence rate of the CH fibers in the foam, the density ratio, the adiabatic coefficient and the foam geometry. We model the foam by different ways, more and more complex. The shock velocity modification is due to the baroclinicity which, during the interaction between the shock front and the interface, creates a vorticity deposition, responsible for the shock acceleration. Accordingly, an interface, which is plane and perpendicular to the front shock, maximizes the vorticity deposition and increases the velocity gaps between heterogeneous and homogeneous media. We found a correlation between the kinetic energy behind the shock front and the velocities relative difference. We compared our results with two analytical models. However, the system is not closed, so we can't for the moment develop a predictive model. (author) [fr

  7. Formation of Benzene in the Interstellar Medium

    Science.gov (United States)

    Jones, Brant M.; Zhang, Fangtong; Kaiser, Ralf I.; Jamal, Adeel; Mebel, Alexander M.; Cordiner, Martin A.; Charnley, Steven B.; Crim, F. Fleming (Editor)

    2010-01-01

    Polycyclic aromatic hydrocarbons and related species have been suggested to play a key role in the astrochemical evolution of the interstellar medium, but the formation mechanism of even their simplest building block-the aromatic benzene molecule-has remained elusive for decades. Here we demonstrate in crossed molecular beam experiments combined with electronic structure and statistical calculations that benzene (C6H6) can be synthesized via the barrierless, exoergic reaction of the ethynyl radical and 1,3- butadiene, C2H + H2CCHCHCH2 --> C6H6, + H, under single collision conditions. This reaction portrays the simplest representative of a reaction class in which aromatic molecules with a benzene core can be formed from acyclic precursors via barrierless reactions of ethynyl radicals with substituted 1,3-butadlene molecules. Unique gas-grain astrochemical models imply that this low-temperature route controls the synthesis of the very first aromatic ring from acyclic precursors in cold molecular clouds, such as in the Taurus Molecular Cloud. Rapid, subsequent barrierless reactions of benzene with ethynyl radicals can lead to naphthalene-like structures thus effectively propagating the ethynyl-radical mediated formation of aromatic molecules in the interstellar medium.

  8. Characterisation of Ferrosilicon Dense Medium Separation Material

    International Nuclear Information System (INIS)

    Waanders, F. B.; Mans, A.

    2003-01-01

    Ferrosilicon is used in the dense medium separation of iron ore at Kumba resources, Sishen, South Africa. Due to high cost and losses that occur during use, maximum recovery by means of magnetic separation is aimed for. The purpose of this project was to determine the characteristics of the unused Fe-Si and then to characterise the changes that occur during storage and use thereof. Scanning electron microscopy was used to determine the composition of each sample, whilst Moessbauer spectroscopy yielded a two-sextet spectrum with hyperfine magnetic field strengths of 20 and 31 T, respectively, for the fresh samples. Additional hematite oxide peaks appeared in the Moessbauer spectra after use of the Fe-Si over a length of time, but this did not result in a dramatic degradation of the medium. No definite changes occurred during correct storage methods. It was, however, found that the biggest loss of Fe-Si was due to the abrasion of the particles, which resulted in the formation of an oxihydroxide froth, during the process.

  9. Formation of benzene in the interstellar medium

    Science.gov (United States)

    Jones, Brant M.; Zhang, Fangtong; Kaiser, Ralf I.; Jamal, Adeel; Mebel, Alexander M.; Cordiner, Martin A.; Charnley, Steven B.

    2011-01-01

    Polycyclic aromatic hydrocarbons and related species have been suggested to play a key role in the astrochemical evolution of the interstellar medium, but the formation mechanism of even their simplest building block—the aromatic benzene molecule—has remained elusive for decades. Here we demonstrate in crossed molecular beam experiments combined with electronic structure and statistical calculations that benzene (C6H6) can be synthesized via the barrierless, exoergic reaction of the ethynyl radical and 1,3-butadiene, C2H + H2CCHCHCH2 → C6H6 + H, under single collision conditions. This reaction portrays the simplest representative of a reaction class in which aromatic molecules with a benzene core can be formed from acyclic precursors via barrierless reactions of ethynyl radicals with substituted 1,3-butadiene molecules. Unique gas-grain astrochemical models imply that this low-temperature route controls the synthesis of the very first aromatic ring from acyclic precursors in cold molecular clouds, such as in the Taurus Molecular Cloud. Rapid, subsequent barrierless reactions of benzene with ethynyl radicals can lead to naphthalene-like structures thus effectively propagating the ethynyl-radical mediated formation of aromatic molecules in the interstellar medium. PMID:21187430

  10. GABA interaction with lipids in organic medium

    International Nuclear Information System (INIS)

    Beltramo, D.; Kivatinitz, S.; Lassaga, E.; Arce, A.

    1987-01-01

    The interaction of 3 H-GABA and 14 C-glutamate with lipids in an aqueous organic partition system was studied. With this partition system 3 H-GABA and 14 C-glutamate were able to interact with sphingomyelin, sulfatide, phosphatidylcholine, phosphatidylserine, phosphatidylethanolamine and phosphatidic acid but not with cholesterol or ceramide. In an homogeneous aqueous medium the authors could not demonstrate any interaction between 3 H-GABA-lipids. The apparent dissociation constants (K/sub d/) for 3 H-GABA-lipids or 14 C-glutamate-lipids interactions inorganic medium were in the millimolar range and maximal charge between 3 and 7 moles of GABA or glutamate by mole of lipid. Amino acids such as glutamic acid, β-alanine and glycine displaced 3 H-GABA with the same potency as GABA itself; thus these results show that the interaction lacks pharmacological specificity. To detect this interaction lipid concentrations higher than 2 μM were required and in the partition system 3 H-GABA and lipid phosphorus were both concentrated at the interface. Therefore, lipids tested with a biphasic partition system do not fulfill the classical criteria for a neurotransmitter receptor at least not for GABA and glutamate. 15 references, 1 figure, 3 tables

  11. Using the printed medium to disseminate information about ...

    African Journals Online (AJOL)

    Using the printed medium to disseminate information about psychiatric disorders: original article. ... Key Words: Health information, Information material, Communication / dissemination of health information, Text-focused research, Usability testing, Message design, Printed medium, Mental health, Schizophrenia

  12. Low energy consumption method for separating gaseous mixtures and in particular for medium purity oxygen production

    Science.gov (United States)

    Jujasz, Albert J.; Burkhart, James A.; Greenberg, Ralph

    1988-01-01

    A method for the separation of gaseous mixtures such as air and for producing medium purity oxygen, comprising compressing the gaseous mixture in a first compressor to about 3.9-4.1 atmospheres pressure, passing said compressed gaseous mixture in heat exchange relationship with sub-ambient temperature gaseous nitrogen, dividing the cooled, pressurized gaseous mixture into first and second streams, introducing the first stream into the high pressure chamber of a double rectification column, separating the gaseous mixture in the rectification column into a liquid oxygen-enriched stream and a gaseous nitrogen stream and supplying the gaseous nitrogen stream for cooling the compressed gaseous mixture, removing the liquid oxygen-enriched stream from the low pressure chamber of the rectification column and pumping the liquid, oxygen-enriched steam to a predetermined pressure, cooling the second stream, condensing the cooled second stream and evaporating the oxygen-enriched stream in an evaporator-condenser, delivering the condensed second stream to the high pressure chamber of the rectification column, and heating the oxygen-enriched stream and blending the oxygen-enriched stream with a compressed blend-air stream to the desired oxygen concentration.

  13. Electromagnetic radiation in a medium with a velocity gradient

    Science.gov (United States)

    Gladyshev, V. O.; Tereshin, A. A.; Bazleva, D. D.

    2016-04-01

    A relativistic expression has been obtained for the curvature of trajectory of the wave vector of an electromagnetic wave in a moving optically transparent medium. It has been shown that the curvature of the trajectory and angular deviation of rays appear in a homogeneous isotropic medium if the gradient of the velocity field in the medium is nonzero. The bending of the trajectory in the medium with the velocity gradient is a firstorder effect in the ratio u/ c.

  14. Two-phase flow in a chemically active porous medium

    International Nuclear Information System (INIS)

    Darmon, Alexandre; Dauchot, Olivier; Benzaquen, Michael; Salez, Thomas

    2014-01-01

    We study the problem of the transformation of a given reactant species into an immiscible product species, as they flow through a chemically active porous medium. We derive the equation governing the evolution of the volume fraction of the species, in a one-dimensional macroscopic description, identify the relevant dimensionless numbers, and provide simple models for capillary pressure and relative permeabilities, which are quantities of crucial importance when tackling multiphase flows in porous media. We set the domain of validity of our models and discuss the importance of viscous coupling terms in the extended Darcy’s law. We investigate numerically the steady regime and demonstrate that the spatial transformation rate of the species along the reactor is non-monotonous, as testified by the existence of an inflection point in the volume fraction profiles. We obtain the scaling of the location of this inflection point with the dimensionless lengths of the problem. Eventually, we provide key elements for optimization of the reactor

  15. Shape instability of a bubble in a viscoelastic medium

    Science.gov (United States)

    Murakami, Kazuya; Gaudron, Renaud; Johnsen, Eric

    2017-11-01

    Bubble dynamics play an important role in therapeutic ultrasound and other medical applications. For this reason, we investigate the shape instability of a single gas bubble in a viscoelastic, tissue-mimicking medium. The non-spherical bubble surface is expressed by superposition of spherical harmonics. Cauchy's equation of motion is reduced to two ordinary differential equations: the Rayleigh-Plesset type equation for the mean bubble radius and the equation for the mode amplitude, which are solved simultaneously. For a given bubble radius and frequency, the parametric instability is determined by the n-th order natural frequency. In addition, the amplitude threshold of the mean radius is analytically found by the stability theory for Mathieu equation. Our analysis is validated against experimental results, in which non-spherical bubble oscillations are observed under ultrasound irradiation. Finally, the pressure threshold for the shape instability is numerically examined. This work was supported in part by ONR Grant N00014-17-1-2058 (under Dr. T. Bentley) and NSF Grant CBET 1253157.

  16. Limits on the ions temperature anisotropy in turbulent intracluster medium

    Energy Technology Data Exchange (ETDEWEB)

    Santos-Lima, R. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Potsdam Univ. (Germany). Inst. fuer Physik und Astronomie; Univ. de Sao Paulo (Brazil). Inst. de Astronomia, Geofisica e Ciencias Atmosfericas; Yan, H. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Potsdam Univ. (Germany). Inst. fuer Physik und Astronomie; Gouveia Dal Pino, E.M. de [Univ. de Sao Paulo (Brazil). Inst. de Astronomia, Geofisica e Ciencias Atmosfericas; Lazarian, A. [Wisconsin Univ., Madison, WI (United States). Dept. of Astronomy

    2016-05-15

    Turbulence in the weakly collisional intracluster medium of galaxies (ICM) is able to generate strong thermal velocity anisotropies in the ions (with respect to the local magnetic field direction), if the magnetic moment of the particles is conserved in the absence of Coulomb collisions. In this scenario, the anisotropic pressure magnetohydrodynamic (AMHD) turbulence shows a very different statistical behaviour from the standard MHD one and is unable to amplify seed magnetic fields, in disagreement with previous cosmological MHD simulations which are successful to explain the observed magnetic fields in the ICM. On the other hand, temperature anisotropies can also drive plasma instabilities which can relax the anisotropy. This work aims to compare the relaxation rate with the growth rate of the anisotropies driven by the turbulence. We employ quasilinear theory to estimate the ions scattering rate due to the parallel firehose, mirror, and ion-cyclotron instabilities, for a set of plasma parameters resulting from AMHD simulations of the turbulent ICM. We show that the ICM turbulence can sustain only anisotropy levels very close to the instabilities thresholds. We argue that the AMHD model which bounds the anisotropies at the marginal stability levels can describe the Alfvenic turbulence cascade in the ICM.

  17. Ecolabel and ecodesign. Aims impossible for small and medium companies?

    International Nuclear Information System (INIS)

    Luciani, R.; Andriola, L.; Masoni, P.

    2000-01-01

    It is commonly held by now that a policy of sustainable development in the production sector cannot be faced in terms of simply reducing the environmental impact at the end of the production chain but should be imprinted with a preventive approach which, intervening on the production cycles and the products themselves, helps minimize pressure on the environment. To be competitive manufacturing industry must contribute a determinant amount to sustainable development by reducing the material content of products and increasing their use value, through processes and products-services that are innovative, safer, cleaner and based on a low use of natural resources. To be effective and avoid merely shifting the problem, this work should not be aimed at the level of individual plants or industries but be broadly planned, taking into account the entire value chain and hence the product's whole life-cycle. In addition, support should be given to small and medium-sized companies that characterize Italian production, because they find it hard to use the tools of a product policy originally ideated for big business [it

  18. The Structure of Shocks in the Very Local Interstellar Medium

    Science.gov (United States)

    Mostafavi, P.; Zank, G. P.

    2018-02-01

    The Voyager 1 magnetometer has detected several shock waves in the very local interstellar medium (VLISM). Interplanetary shock waves can be transmitted across the heliopause (HP) into the VLISM. The first in situ shock observed by Voyager 1 inside the VLISM was remarkably broad and had properties different than those of shocks inside the heliosphere. We present a model of the 2012 VLISM shock, which was observed to be a weak, quasi-perpendicular, low magnetosonic Mach number, low beta, and subcritical shock. Although the heliosphere is a collisionless environment, we show that the VLISM is collisional with respect to the thermal plasma, and that the thermal collisions introduce dissipative terms such as heat conduction and viscosity. The structure of the VLISM shock is determined by thermal proton–proton collisions. VLISM pickup ions (PUIs) do not introduce a significant pressure or dissipation through the shock transition, meaning that the VLISM shock is not mediated by PUIs but only by the thermal gas and magnetic field. Therefore, VLISM shocks are controlled by particle collisions and not by wave–particle interactions. We find that the weak VLISM shock is very broad with a thickness of about 0.12 au, corresponding to the characteristic thermal heat conduction scale length.

  19. Evaluation of the technical condition of medium-sized boilers

    Directory of Open Access Journals (Sweden)

    Lošák Pavel

    2018-01-01

    Full Text Available The recent trend in the steam and electricity production has been both to increase the efficiency of the facility and to keep tightening legislation concerning emission limits. The lifetime of energy equipment is greatly influenced by the operating temperature, pressure and operating characteristics. The new conditions lead the operator to more often changes of these parameters, which has negative influence to the facility in terms of service life. Precise knowledge of the facility being operated and the ability to predict the residual life of its key parts in time is therefore necessary. A new methodology for determining the residual life and evaluating problematic situations of medium size boilers was developed at Brno University of Technology. Its approaches and advantages will be presented in this paper. The methodology provides the user with approaches for the lifetime evaluation of an equipment as a whole, based on detailed knowledge of the equipment being investigated and the ongoing damage. Additionally, if the equipment is continuously evaluated, it is possible to extend the inspection interval or to achieve a significantly higher lifetime of the entire equipment, thereby reducing the economic cost. If defined criteria are met, the methodology also allows inclusion of FEM and CFD simulations for achieving higher relevance of the results.

  20. Medium Density Fibreboard Made of Acetylated Sludge from Paper Mill

    Directory of Open Access Journals (Sweden)

    Luthfi Hakim

    2013-03-01

    Full Text Available Research of using sludge as raw material for making medium density fibreboard (MDF was useful to create additional value of sludge. The objective of the research was to evaluate physical properties, mechanical properties, and durability of MDF from acetylated sludge in 4 levels of acetate anhydride (0%, 3%, 5%, and 7% with 3 replicates. The MDF was made using dry process. After materials were mixed with adhesives, they were pressed using hotpress under 170 oC temperature and 45 Pa pressure for 25 minutes. The size of the MDF sample was 25 cm x 20 cm x 1 cm with 0.8 g/cm3 density. The physical properties (density, moisture content, water absorption, thickness swelling and mechanical properties (modulus of elasticity, modulus of rupture, internal bond, screw holding power was tested based on JIS A 5905-2003 standard. The durability was evaluated using SNI 01-7207-2006. All physical properties of MDF fulfill JIS A 5905-2003. Acetate anhydride decreased the moisture content value of MDF. On the other hand, all mechanical properties did not fulfill the standard. That was caused by calcium carbonate in sludge that blocked the adhesion between sludge fibres. The durability of MDF tested here was classified Class I which is very resistant to termites.

  1. Finite element discretization of Darcy's equations with pressure dependent porosity

    KAUST Repository

    Girault, Vivette

    2010-02-23

    We consider the flow of a viscous incompressible fluid through a rigid homogeneous porous medium. The permeability of the medium depends on the pressure, so that the model is nonlinear. We propose a finite element discretization of this problem and, in the case where the dependence on the pressure is bounded from above and below, we prove its convergence to the solution and propose an algorithm to solve the discrete system. In the case where the dependence on the pressure is exponential, we propose a splitting scheme which involves solving two linear systems, but parts of the analysis of this method are still heuristic. Numerical tests are presented, which illustrate the introduced methods. © 2010 EDP Sciences, SMAI.

  2. Effect of potassium simplex optimization medium (KSOM) and ...

    African Journals Online (AJOL)

    In this study, we produced cloned transgenic dairy goat based on dairy goat ear skin fibroblast as donor cells for nuclear transfer (NT), which were modified by ... culture medium, potassium simplex optimization medium (KSOM) and tissue culture medium (TCM 199), or different classification of NT embryos (48 h after fusion).

  3. Lime-amended growing medium causes seedling growth distortions

    Science.gov (United States)

    R. Kasten Dumroese; Gale Thompson; David L. Wenny

    1990-01-01

    Although a commercial growing medium with incorporated agricultural lime had been successfully used for years, it caused growth distortion of coniferous and deciduous seedlings during 1988. Seedlings grown in the amended medium were stunted and chlorotic, often with disfigured needles and multiple tops. Seedlings grown in the same medium without incorporated lime grew...

  4. Medium optimization for protopectinase production by batch culture of

    African Journals Online (AJOL)

    Medium optimization for protopectinase production by batch culture of. C Fan, Z Liu, L Yao. Abstract. Optimization of medium compositions for protopectinase production by Aspergillus terreus in submerged culture was carried out. The medium components having significant effect on protopectinase production were reported ...

  5. 7 CFR 51.2751 - U.S. Medium Virginia.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Medium Virginia. 51.2751 Section 51.2751... STANDARDS) United States Standards for Shelled Virginia Type Peanuts Grades § 51.2751 U.S. Medium Virginia. “U.S. Medium Virginia” consists of shelled Virginia type peanut kernels of similar varietal...

  6. Economic Efficiency of small and Medium Scale Cassava ...

    African Journals Online (AJOL)

    ... medium scale enterprises. Small and medium scale cassava processor should therefore focus more on ways of accessing credit while government should ensure more extension visits to the processors. Key words; Economic Efficiency, Small and Medium Enterprise, Cassava Processing Enterprise, Nigeria, Agribusiness ...

  7. 21 CFR 133.103 - Asiago medium cheese.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Asiago medium cheese. 133.103 Section 133.103 Food... HUMAN CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific Standardized Cheese and Related Products § 133.103 Asiago medium cheese. Asiago medium cheese conforms to the definition and...

  8. 30 CFR 75.703-2 - Approved grounding mediums.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Approved grounding mediums. 75.703-2 Section 75... AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Grounding § 75.703-2 Approved grounding mediums. For purposes of grounding offtrack direct-current machines, the following grounding mediums are...

  9. Phase Change of Water in a Hygroscopic Porous Medium. Phenomenological Relation and Experimental Analysis for Water in Soil

    Science.gov (United States)

    Bénet, Jean-Claude; Lozano, Anne-Laure; Cherblanc, Fabien; Cousin, Bruno

    2009-06-01

    The phenomenological relation of non-equilibrium liquid-gas phase change in a porous medium is described at the macroscopic level using the difference in chemical potentials between the liquid and its vapor. The experiments conducted consisted in lowering the partial pressure of water vapor in the pores of a hygroscopic soil and analyzing the return to equilibrium by two measurements: the macroscopic temperature and the partial pressure of vapor. The central hypothesis of the study is that the characteristic time associated with thermal equilibrium is much lower than the characteristic time associated with mass transfers. From these measurements, it is possible to determine the relation that links phase change rate to the logarithm of the ratio of partial vapor pressure divided by the equilibrium pressure (RH). The representation of this relation according to RH reveals two regimes in the return to equilibrium. The characteristics of these regimes are analyzed according to water content, temperature, and total gas phase pressure.

  10. High Pressure Effects on Lipid Oxidation of Extra Virgin Olive Oils

    African Journals Online (AJOL)

    and to modify some functional characteristics of foods (fish, ... pressurized foods. TANAKA et al. (1990) studied freeZe- dried sardines and sardine oils treated at. 180 Mpa for 60 minutes. In this case, the medium pressure treatment produced the formation and an ... containers (nylon/PE films - 100 ml.) and treated at 700 Mpa ...

  11. Pressure-induced phase transformations in the Ba8Si46 clathrate

    DEFF Research Database (Denmark)

    Yang, Lirong; Ma, Y.M.; Iitaka, T.

    2006-01-01

    The nature of isostructural transformations of a type-I Ba8Si46 clathrate has been studied by in situ high-pressure angle-dispersive x-ray powder diffraction using liquid He as pressure transmitting medium. The good quality of the diffraction data permitted refinement of structural and thermal...

  12. Wireless system for monitoring Intra-abdominal pressure in patient with severe abdominal pathology

    Science.gov (United States)

    Sokolovskiy, S. S.; Shtotskiy, Y. V.; Leljanov, A. D.

    2017-01-01

    The paper discusses an experimental design of the wireless system for monitoring intra-abdominal pressure (IAP) using Bluetooth Low Energy technology. The possibility of measuring IAP via the bladder using a wireless pressure sensor with a hydrophobic bacteria filter between the liquid transmitting medium and the sensor element is grounded.

  13. Beam trajectories in the intracluster medium

    International Nuclear Information System (INIS)

    Zaninetti, L.; Van Horn, H.

    1986-01-01

    The mechanisms responsible for the long tails of extended radio sources are investigated analytically by means of numerical simulations. A relatively simple kinematic ram-pressure-bending model allowing for variable jet direction or velocity, jet-axis precession, and variable observer orientation is employed, and the results are presented graphically. Models with appropriately selected parameter values are shown to produce a broad range of morphologies, including the the observed transition from C-shaped to S-shaped structures. 9 references

  14. Contrast medium extravasation in intravenous urography

    International Nuclear Information System (INIS)

    Tosch, U.; Becker-Gaab, C.; Hahn, D.

    1984-01-01

    Aetiology and diagnostic procedure of calyceal fornix rupture during intravenous urography are discussed. In the literature the fornix rupture is discribed as a spontaneous event - not so in the four cases presented. In two cases a sudden increase in intrapelvic pressure was due to an ureteric calculus, in the other cases an obstruction of the ureter was secondary to neoplasm. It is recommended to perform a CT as soon as a contrastmedium extravasation in intravenous urography is diagnosed. (orig.) [de

  15. High-pressure crystallography.

    Science.gov (United States)

    McMahon, Malcolm I

    2012-01-01

    The ability of pressure to change inter-atomic distances strongly leads to a wide range of pressure-induced phenomena at high pressures: for example metallisation, amorphisation, superconductivity and polymerisation. Key to understanding these phenomena is the determination of the crystal structure using x-ray or neutron diffraction. The tools necessary to compress matter above 1 million atmospheres (1 Megabar or 100 GPa) were established by the mid 1970s, but it is only since the early 1990s that we have been able to determine the detailed crystal structures of materials at such pressures. In this chapter I briefly review the history of high-pressure crystallography, and describe the techniques used to obtain and study materials at high pressure. Recent crystallographic studies of elements are then used to illustrate what is now possible using modern detectors and synchrotron sources. Finally, I speculate as to what crystallographic studies might become possible over the next decade.

  16. Priming Mesenchymal Stem Cells with Endothelial Growth Medium Boosts Stem Cell Therapy for Systemic Arterial Hypertension

    Directory of Open Access Journals (Sweden)

    Lucas Felipe de Oliveira

    2015-01-01

    Full Text Available Systemic arterial hypertension (SAH, a clinical syndrome characterized by persistent elevation of arterial pressure, is often associated with abnormalities such as microvascular rarefaction, defective angiogenesis, and endothelial dysfunction. Mesenchymal stem cells (MSCs, which normally induce angiogenesis and improve endothelial function, are defective in SAH. The central aim of this study was to evaluate whether priming of MSCs with endothelial growth medium (EGM-2 increases their therapeutic effects in spontaneously hypertensive rats (SHRs. Adult female SHRs were administered an intraperitoneal injection of vehicle solution n=10, MSCs cultured in conventional medium (DMEM plus 10% FBS, n=11, or MSCs cultured in conventional medium followed by 72 hours in EGM-2 (pMSC, n=10. Priming of the MSCs reduced the basal cell death rate in vitro. The administration of pMSCs significantly induced a prolonged reduction (10 days in arterial pressure, a decrease in cardiac hypertrophy, an improvement in endothelium-dependent vasodilation response to acetylcholine, and an increase in skeletal muscle microvascular density compared to the vehicle and MSC groups. The transplanted cells were rarely found in the hearts and kidneys. Taken together, our findings indicate that priming of MSCs boosts stem cell therapy for the treatment of SAH.

  17. 46 CFR 197.462 - Pressure vessels and pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure vessels and pressure piping. 197.462 Section... Diving Equipment § 197.462 Pressure vessels and pressure piping. (a) The diving supervisor shall ensure that each pressure vessel, including each volume tank, cylinder and PVHO, and each pressure piping...

  18. Thermistor Pressure Gauge Design

    Science.gov (United States)

    Flanick, A. P.; Ainsworth, J. E.

    1961-01-01

    Thermistor pressure gauges are characterized by large pressure range, good accuracy and stability, fast measurement, insensitivity to over-pressure, negligible out-gassing, ease in cleaning, and physical and electrical simplicity and ruggedness. A number of excellent papers have been published describing these gauges. However, a detailed account of design procedure and characteristics for a specific gauge would eliminate much of the trial and error encountered in designing a gauge having prescribed range, sensitivity, and stability.

  19. Measuring fluid pressure

    International Nuclear Information System (INIS)

    Lee, A.S.

    1978-01-01

    A method and apparatus are described for measuring the pressure of a fluid having characteristics that make it unsuitable for connection directly to a pressure gauge. The method is particularly suitable for the periodic measurement of the pressure of a supply of liquid Na to Na-lubricated bearings of pumps for pumping Na from a reservoir to the bearing via a filter, the reservoir being contained in a closed vessel containing an inert blanket gas, such as Ar, above the Na. (UK)

  20. High temperature pressure gauge

    Science.gov (United States)

    Echtler, J. Paul; Scandrol, Roy O.

    1981-01-01

    A high temperature pressure gauge comprising a pressure gauge positioned in fluid communication with one end of a conduit which has a diaphragm mounted in its other end. The conduit is filled with a low melting metal alloy above the diaphragm for a portion of its length with a high temperature fluid being positioned in the remaining length of the conduit and in the pressure gauge.

  1. Pressure cryocooling protein crystals

    Science.gov (United States)

    Kim, Chae Un [Ithaca, NY; Gruner, Sol M [Ithaca, NY

    2011-10-04

    Preparation of cryocooled protein crystal is provided by use of helium pressurizing and cryocooling to obtain cryocooled protein crystal allowing collection of high resolution data and by heavier noble gas (krypton or xenon) binding followed by helium pressurizing and cryocooling to obtain cryocooled protein crystal for collection of high resolution data and SAD phasing simultaneously. The helium pressurizing is carried out on crystal coated to prevent dehydration or on crystal grown in aqueous solution in a capillary.

  2. Pressure detection system

    International Nuclear Information System (INIS)

    Lawford, V.N.; Long, C.E.

    1975-01-01

    The pressure detection system described comprises a first bellows assembly that can be connected to a source of fluid under pressure, a pressure detection apparatus, a second bellows assembly connected to the first assembly and pipes with a coupling device connecting the second bellows assembly to the apparatus. The first and second assemblies can only be disconnected with difficulty from the source or not at all [fr

  3. Transitioning from Maori-Medium to English-Medium Education: Emerging Findings of a Pilot Study

    Science.gov (United States)

    Hill, Richard

    2016-01-01

    Maori-bilingual education in New Zealand has come a long way towards injecting life into the Maori language. However, only a small number of families commit to bilingual education for the long term. This paper discusses why Maori parents either turn away from Maori-bilingual education or prematurely transition to English-medium schools. It then…

  4. Diagnosis of High Blood Pressure

    Medline Plus

    Full Text Available ... Card can help you track your blood pressure. Pregnancy Planning High blood pressure can cause problems for ... control your blood pressure before and during the pregnancy. Some women develop high blood pressure during pregnancy. ...

  5. Attachment Fitting for Pressure Vessel

    Science.gov (United States)

    Smeltzer, Stanley S., III (Inventor); Carrigan, Robert W. (Inventor)

    2002-01-01

    This invention provides sealed access to the interior of a pressure vessel and consists of a tube. a collar, redundant seals, and a port. The port allows the seals to be pressurized and seated before the pressure vessel becomes pressurized.

  6. Sapphire tube pressure vessel

    Science.gov (United States)

    Outwater, John O.

    2000-01-01

    A pressure vessel is provided for observing corrosive fluids at high temperatures and pressures. A transparent Teflon bag contains the corrosive fluid and provides an inert barrier. The Teflon bag is placed within a sapphire tube, which forms a pressure boundary. The tube is received within a pipe including a viewing window. The combination of the Teflon bag, sapphire tube and pipe provides a strong and inert pressure vessel. In an alternative embodiment, tie rods connect together compression fittings at opposite ends of the sapphire tube.

  7. High-pressure apparatus

    OpenAIRE

    Schepdael, van, L.J.M.; Bartels, P.V.; Berg, van den, R.W.

    1999-01-01

    The invention relates to a high-pressure device (1) having a cylindrical high-pressure vessel (3) and prestressing means in order to exert an axial pressure on the vessel. The vessel (3) can have been formed from a number of layers of composite material, such as glass, carbon or aramide fibers which are oriented in the peripheral direction and are embedded in a matrix of epoxy resin or polyurethane. By applying the axial prestress to the pressure vessel (3), the tangential stress is distribut...

  8. Nuclear reactor pressure vessel

    International Nuclear Information System (INIS)

    McDonald, B.N.

    1976-01-01

    In nuclear power reactor systems which have a reactor core inside a pressure vessel, the feedwater inlet pipe and steam discharge nozzle usually require separate pressure vessel penetrations. This requirement involves a great deal of expensive high quality special machining, welding and weld joint testing. The invention overcomes most of these problems by nestling the feedwater inlet pipe inside the steam discharge nozzle. At the same time the individual heat exchanger modules are supported from the pressure vessel at the same location as the nested feedwater inlet pipe and steam discharge nozzle combination, thus eliminating the need to accomodate troublesome differential thermal expansion problems through special structures within the pressure vessel

  9. [Spin dependent phenomena in medium energy physics

    International Nuclear Information System (INIS)

    Souder, P.A.

    1992-11-01

    The Syracuse University Medium Energy Physics Group was actively engaged in several research projects. A laser was used to polarize muonic atoms with the goal of measuring fundamental spin-dependent parameters in the reaction μ - + 3 He → 3 H + ν. Time-averaged polarizations of 26.8±2.3% were achieved for the muon in muonic 3 He. The new approach uses atomic spin-dependent reactions between laser polarized Rb vapor and muonic helium. To exploit these high polarizations in a muon capture experiment an ion chamber which will detect the recoil tritons and also serve as a polarizing cell. Final data-taking will begin for an experiment to measure the spin-dependent structure functions of the neutron. A 288-element hodoscope system which features good timing and precise mechanical tolerances was constructed and evaluated

  10. Light Vector Mesons in the Nuclear Medium

    Energy Technology Data Exchange (ETDEWEB)

    Wood, Michael; Nasseripour, Rakhsha; Weygand, Dennis; Djalali, Chaden; Tur, Clarisse; Mosel, Ulrich; Muehlich, Pascal; Adams, Gary; Amaryan, Moscov; Amaryan, Moskov; Ambrozewicz, Pawel; Anghinolfi, Marco; Asryan, Gegham; Avagyan, Harutyun; Baghdasaryan, Hovhannes; Baillie, Nathan; Ball, James; Baltzell, Nathan; Barrow, Steve; Battaglieri, Marco; Bedlinskiy, Ivan; Bektasoglu, Mehmet; Bellis, Matthew; Benmouna, Nawal; Berman, Barry; Biselli, Angela; Blaszczyk, Lukasz; Bouchigny, Sylvain; Boyarinov, Sergey; Bradford, Robert; Branford, Derek; Briscoe, William; Brooks, William; Burkert, Volker; Butuceanu, Cornel; Calarco, John; Careccia, Sharon; Carman, Daniel; Carnahan, Bryan; Casey, Liam; Chen, Shifeng; Cheng, Lu; Cole, Philip; Collins, Patrick; Coltharp, Philip; Crabb, Donald; Crannell, Hall; Crede, Volker; Cummings, John; Dashyan, Natalya; De Vita, Raffaella; De Sanctis, Enzo; Degtiarenko, Pavel; Denizli, Haluk; Dennis, Lawrence; Deur, Alexandre; Dharmawardane, Kahanawita; Dickson, Richard; Dodge, Gail; Doughty, David; Dugger, Michael; Dytman, Steven; Dzyubak, Oleksandr; Egiyan, Hovanes; Egiyan, Kim; Elfassi, Lamiaa; Elouadrhiri, Latifa; Eugenio, Paul; Fedotov, Gleb; Feldman, Gerald; Feuerbach, Robert; Fradi, Ahmed; Funsten, Herbert; Garcon, Michel; Gavalian, Gagik; Gilfoyle, Gerard; Giovanetti, Kevin; Girod, Francois-Xavier; Goetz, John; Gordon, Christopher; Gothe, Ralf; Griffioen, Keith; Guidal, Michel; Guler, Nevzat; Guo, Lei; Gyurjyan, Vardan; Hadjidakis, Cynthia; Hafidi, Kawtar; Hakobyan, Hayk; Hakobyan, Rafael; Hanretty, Charles; Hardie, John; Hassall, Neil; Hersman, F.; Hicks, Kenneth; Hleiqawi, Ishaq; Holtrop, Maurik; Hyde, Charles; Ilieva, Yordanka; Ireland, David; Ishkhanov, Boris; Isupov, Evgeny; Ito, Mark; Jenkins, David; Jo, Hyon-Suk; Johnstone, John; Joo, Kyungseon; Juengst, Henry; Kalantarians, Narbe; Kellie, James; Khandaker, Mahbubul; Khetarpal, Puneet; Kim, Wooyoung; Klein, Andreas; Klein, Franz; Klimenko, Alexei; Kossov, Mikhail; Krahn, Zebulun; Kramer, Laird; Kubarovsky, Valery; Kuhn, Joachim; Kuhn, Sebastian; Kuleshov, Sergey; Lachniet, Jeff; Laget, Jean; Langheinrich, Jorn; Lawrence, David; Li, Ji; Livingston, Kenneth; Lu, Haiyun; MacCormick, Marion; Markov, Nikolai; Mattione, Paul; McAleer, Simeon; McKinnon, Bryan; McNabb, John; Mecking, Bernhard; Mehrabyan, Surik; Melone, Joseph; Mestayer, Mac; Meyer, Curtis; Mibe, Tsutomu; Mikhaylov, Konstantin; Minehart, Ralph; Mirazita, Marco; Miskimen, Rory; Mokeev, Viktor; Moriya, Kei; Morrow, Steven; Moteabbed, Maryam; Mueller, James; Munevar Espitia, Edwin; Mutchler, Gordon; Nadel-Turonski, Pawel; Niccolai, Silvia; Niculescu, Gabriel; Niculescu, Maria-Ioana; Niczyporuk, Bogdan; Niroula, Megh; Niyazov, Rustam; Nozar, Mina; Osipenko, Mikhail; Ostrovidov, Alexander; Park, Kijun; Pasyuk, Evgueni; Paterson, Craig; Pereira, Sergio; Pierce, Joshua; Pivnyuk, Nikolay; Pocanic, Dinko; Pogorelko, Oleg; Pozdnyakov, Sergey; Preedom, Barry; Price, John; Prok, Yelena; Protopopescu, Dan; Raue, Brian; Riccardi, Gregory; Ricco, Giovanni; Ripani, Marco; Ritchie, Barry; Ronchetti, Federico; Rosner, Guenther; Rossi, Patrizia; Sabatie, Franck; Salamanca, Julian; Salgado, Carlos; Santoro, Joseph; Sapunenko, Vladimir; Schumacher, Reinhard; Serov, Vladimir; Sharabian, Youri; Sharov, Dmitri; Shvedunov, Nikolay; Smith, Elton; Smith, Lee; Sober, Daniel; Sokhan, Daria; Stavinsky, Aleksey; Stepanyan, Stepan; Stepanyan, Samuel; Stokes, Burnham; Stoler, Paul; Strakovski, Igor; Strauch, Steffen; Taiuti, Mauro; Tedeschi, David; Tkabladze, Avtandil; Tkachenko, Svyatoslav; Todor, Luminita; Ungaro, Maurizio; Vineyard, Michael; Vlassov, Alexander; Watts, Daniel; Weinstein, Lawrence; Williams, Michael; Wolin, Elliott; Yegneswaran, Amrit; Zana, Lorenzo; Zhang, Bin; Zhang, Jixie; Zhao, Bo; Zhao, Zhiwen

    2008-07-01

    The light vector mesons ($\\rho$, $\\omega$, and $\\phi$) were produced in deuterium, carbon, titanium, and iron targets in a search for possible in-medium modifications to the properties of the $\\rho$ meson at normal nuclear densities and zero temperature. The vector mesons were detected with the CEBAF Large Acceptance Spectrometer (CLAS) via their decays to $e^{+}e^{-}$. The rare leptonic decay was chosen to reduce final-state interactions. A combinatorial background was subtracted from the invariant mass spectra using a well-established event-mixing technique. The $\\rho$ meson mass spectrum was extracted after the $\\omega$ and $\\phi$ signals were removed in a nearly model-independent way. Comparisons were made between the $\\rho$ mass spectra from the heavy targets ($A > 2$) with the mass spectrum extracted from the deuterium target. With respect to the $\\rho$-meson mass, we obtain a small shift compatible with zero. Also, we measure widths consistent with standard nuclear many-body eff

  11. Cosmic rays and the interstellar medium

    International Nuclear Information System (INIS)

    Wolfendale, A.W.

    1986-01-01

    It is inevitable that there is a close connection between cosmic rays and the ISM insofar as the propagation of cosmic rays is conditioned by the magnetic field in the ISM and the cosmic rays interact with the gas (and photon fluxes) in this medium. This paper deals with both topics. Propagation effects manifest themselves as an anisotropy in arrival directions and a review is given of anisotropy measurements and their interpretation. The status of studies of cosmic ray interactions is examined whit particular reference to the information about the ISM itself which comes from observations of the flux of secondary γ-rays produced by cosmic ray interactions with gas, the situation regarding molecular as in the Inner Galaxy being of particular concern

  12. Ultrasound fields in an attenuating medium

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt; Gandhi,, D; O'Brien,, W.D., Jr.

    1993-01-01

    of the rectangles and sums all contributions to arrive at the spatial impulse response for the aperture and field point. This approach makes it possible to model all transducer apertures, and the program can readily calculate the emitted, pulse-echo and continuous wave field. Attenuation is included by splitting...... it into a frequency dependent part and frequency independent part. The latter results in an attenuation factor that is multiplied onto the responses from the individual elements, and the frequency dependent part is handled by attenuating the basic one-dimensional pulse. The influence on ultrasound fields from......Ultrasound fields propagating in tissue will undergo changes in shape not only due to diffraction, but also due to the frequency dependent attenuation. Linear fields can be fairly well predicted for a non-attenuating medium like water by using the Tupholme-Stepanishen method for calculating...

  13. Fluid flow through anisotropic porous medium

    International Nuclear Information System (INIS)

    Telles, A.S.; Massarani, G.

    1975-01-01

    Darcy's equation represents a simplified form of the equation of motion for the fluid flowing through a porous medium. The simplifications concern the elimination of the acceleration, the divergence of the extra stress terms, and the assumption of existence of a linear form in the velocity for the resistive force the fluid exerts upon the solid. This hypothesis may not be valid for all anisotropic media. In some instances, measurements of directional resistivity suggest existence of the resistivity tensor, leaving entirely open the question of symmetry. In connection with this important question, an experimental scheme for the determination of the antisymmetric part of this tensor is suggested. The conclusion is that material symmetries is the only macroscopic concept that imposes restrictions on the form of the resistivity and extra stress tensors [pt

  14. "Resolving" the Problems of the Circumgalactic Medium

    Science.gov (United States)

    Hummels, Cameron

    2018-01-01

    Galactic gas accretion drives the formation and evolution of every galaxy. The circumgalactic medium, the tenuous gas surrounding a galaxy, acts as a direct probe of star formation, stellar feedback, and gas accretion, all responsible for a galaxy's fate. To date, attempts to model the multiphase CGM have failed to adequately match observations, leaving many unanswered questions regarding its origin, distribution, and kinematics. In this talk I will present synthetic observations of the CGM from the FIRE simulations and the TempestCGM simulations, two sets of state-of-the-art cosmological hydrodynamic zoom-in simulations with extremely high spatial resolution. For the first time, these models are able to reproduce many of the CGM observational samples (e.g. COS-Halos), and they indicate that the size of the physical structures of the CGM are smaller than previously simulated (< 1 kpc).

  15. Polarization of submillimetre lines from interstellar medium

    Science.gov (United States)

    Zhang, Heshou; Yan, Huirong

    2018-04-01

    Magnetic fields play important roles in many astrophysical processes. However, there is no universal diagnostic for the magnetic fields in the interstellar medium (ISM) and each magnetic tracer has its limitation. Any new detection method is thus valuable. Theoretical studies have shown that submillimetre fine-structure lines are polarized due to atomic alignment by ultraviolet photon-excitation, which opens up a new avenue to probe interstellar magnetic fields. We will, for the first time, perform synthetic observations on the simulated three-dimensional ISM to demonstrate the measurability of the polarization of submillimetre atomic lines. The maximum polarization for different absorption and emission lines expected from various sources, including star-forming regions are provided. Our results demonstrate that the polarization of submillimetre atomic lines is a powerful magnetic tracer and add great value to the observational studies of the submilimetre astronomy.

  16. Abundances in the diffuse interstellar medium

    International Nuclear Information System (INIS)

    Harris, A.W.

    1988-04-01

    The wealth of interstellar absorption line data obtained with the Copernicus and IUE satellites has opened up a new era in studies of the interstellar gas. It is now well established that certain elements, generally those with high condensation temperatures, are substantially under-abundant in the gas-phase relative to total solar or cosmic abundances. This depletion of elements is due to the existence of solid material in the form of dust grains in the interstellar medium. Surprisingly, however, recent surveys indicate that even volatile elements such as Zn and S are significantly depleted in many sight lines. Developments in this field which have been made possible by the large base of UV interstellar absorption line data built up over recent years are reviewed and the implications of the results for our understanding of the physical processes governing depletion are discussed. (author)

  17. Thermal instability in the interstellar medium

    Directory of Open Access Journals (Sweden)

    J. Ghanbari

    2000-06-01

    Full Text Available   This study demonstrates how thermal structures in the interstellar medium can emerge as a result of thermal instability. For a two-dimensional case, the steady state thermal structures was investigeted and it was shown that a large class of solutions exist. For a one –dimensional case the conductivity was found to be negligible. The effects of to cal cooling on the thermal instability were explored in some depth. In this case analytical results for time-dependent cooling function were presented, too. We studied nonlinear wave phenomena in thermal fluid systems, with a particular emphasis on presenting analytical results. When conductivity is proportional to temperature, the beliavior of thermal waves is soliton like. For slow thermal waves, approximate analytical results were presented. Extensions of this work are discussed briefly, together with possible astrophysical applications.

  18. Medium Duty Electric Vehicle Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Mackie, Robin J. D. [Smith Electric Vehicles Corporation, Kansas City, MO (United States)

    2015-05-31

    The Smith Electric Vehicle Demonstration Project (SDP) was integral to the Smith business plan to establish a manufacturing base in the United States (US) and produce a portfolio of All Electric Vehicles (AEV’s) for the medium duty commercial truck market. Smith focused on the commercial depot based logistics market, as it represented the market that was most ready for the early adoption of AEV technology. The SDP enabled Smith to accelerate its introduction of vehicles and increase the size of its US supply chain to support early market adoption of AEV’s that were cost competitive, fully met the needs of a diverse set of end users and were compliant with Federal safety and emissions requirements. The SDP accelerated the development and production of various electric drive vehicle systems to substantially reduce petroleum consumption, reduce vehicular emissions of greenhouse gases (GHG), and increase US jobs.

  19. Managing Safety in Small and Medium Enterprises

    DEFF Research Database (Denmark)

    Stephen, legg; Olsen, Kirsten Bendix; Ian S., laird

    2015-01-01

    This paper presents a conceptual model for increasing acceptable working environments for SMEs. It also acts as an editorial for the special issue of Safety Science on ‘Managing safety in small and medium enterprises (SMEs)’. It describes how seven of the ten papers in the special issue originate...... on safety in SMEs, showing how most current policy and legislation on occupational health and safety (OSH) and the work environment is based on large enterprises and that there is a relative paucity of research on OSH in SMEs. In a summary of current knowledge, it is argued that modern OHS legislation...... and interventions to help improve Work environments need to increasingly take account of the specific characteristics of SMEs. The conceptual model for increasing acceptable working environments for SMEs takes its onset in a legislative standard that is built into intervention programmes and includes three...

  20. A medium resolution fingerprint matching system

    Directory of Open Access Journals (Sweden)

    Ayman Mohammad Bahaa-Eldin

    2013-09-01

    Full Text Available In this paper, a novel minutiae based fingerprint matching system is proposed. The system is suitable for medium resolution fingerprint images obtained by low cost commercial sensors. The paper presents a new thinning algorithm, a new features extraction and representation, and a novel feature distance matching algorithm. The proposed system is rotation and translation invariant and is suitable for complete or partial fingerprint matching. The proposed algorithms are optimized to be executed on low resource environments both in CPU power and memory space. The system was evaluated using a standard fingerprint dataset and good performance and accuracy were achieved under certain image quality requirements. In addition, the proposed system was compared favorably to that of the state of the art systems.

  1. Germination of vegetable seeds exposed to very high pressure

    International Nuclear Information System (INIS)

    Mori, Y; Yokota, S; Ono, F

    2012-01-01

    Effects of high hydrostatic pressure were investigated on vegetable seeds in the GPa range to examine the potentialities of breed improvement by high-pressure processing. Specimens of several seeds of broccoli (Brassica oleracea var. italica), Turnip leaf (Brassica rapa var. perviridis) and Potherb Mustard (Brassica rapa var. nipposinica) were put in a teflon capsule with liquid high pressure medium, fluorinate, and inserted into a pyrophillite cube. By using a cubic anvil press a hydrostatic pressure of 5.5 GP a was applied to these seeds for 15 minutes. After being brought back to ambient pressure, they were seeded on humid soil in a plant pot. Many of these vegetable seeds began to germinate within 6 days after seeded.

  2. Germination of vegetable seeds exposed to very high pressure

    Science.gov (United States)

    Mori, Y.; Yokota, S.; Ono, F.

    2012-07-01

    Effects of high hydrostatic pressure were investigated on vegetable seeds in the GPa range to examine the potentialities of breed improvement by high-pressure processing. Specimens of several seeds of broccoli (Brassica oleracea var. italica), Turnip leaf (Brassica rapa var. perviridis) and Potherb Mustard (Brassica rapa var. nipposinica) were put in a teflon capsule with liquid high pressure medium, fluorinate, and inserted into a pyrophillite cube. By using a cubic anvil press a hydrostatic pressure of 5.5 GP a was applied to these seeds for 15 minutes. After being brought back to ambient pressure, they were seeded on humid soil in a plant pot. Many of these vegetable seeds began to germinate within 6 days after seeded.

  3. Tolerance of budding yeast Saccharomyces cerevisiae to ultra high pressure

    Science.gov (United States)

    Shibata, M.; Torigoe, M.; Matsumoto, Y.; Yamamoto, M.; Takizawa, N.; Hada, Y.; Mori, Y.; Takarabe, K.; Ono, F.

    2014-05-01

    Our studies on the tolerance of plants and animals against very high pressure of several GPa have been extended to a smaller sized fungus, the budding yeast Saccharomyces cerevisiae. Several pieces of budding yeast (dry yeast) were sealed in a small teflon capsule with a liquid pressure medium fluorinate, and exposed to 7.5 GPa by using a cubic anvil press. The pressure was kept constant for various duration of time from 2 to 24 h. After the pressure was released, the specimens were brought out from the teflon capsule, and they were cultivated on a potato dextrose agar. It was found that the budding yeast exposed to 7.5 GPa for up to 6 h showed multiplication. However, those exposed to 7.5 GPa for longer than 12 h were found dead. The high pressure tolerance of budding yeast is a little weaker than that of tardigrades.

  4. Magnetic Fields in the Interstellar Medium

    Science.gov (United States)

    Clark, Susan

    2017-01-01

    The Milky Way is magnetized. Invisible magnetic fields thread the Galaxy on all scales and play a vital but still poorly understood role in regulating flows of gas in the interstellar medium and the formation of stars. I will present highlights from my thesis work on magnetic fields in the diffuse interstellar gas and in accretion disks. At high Galactic latitudes, diffuse neutral hydrogen is organized into an intricate network of slender linear features. I will show that these neutral hydrogen “fibers” are extremely well aligned with the ambient magnetic field as traced by both starlight polarization (Clark et al. 2014) and Planck 353 GHz polarized dust emission (Clark et al. 2015). The structure of the neutral interstellar medium is more tightly coupled to the magnetic field than previously known. Because the orientation of neutral hydrogen is an independent predictor of the local dust polarization angle, our work provides a new tool in the search for inflationary gravitational wave B-mode polarization in the cosmic microwave background, which is currently limited by dust foreground contamination. Magnetic fields also drive accretion in astrophysical disks via the magnetorotational instability (MRI). I analytically derive the behavior of this instability in the weakly nonlinear regime and show that the saturated state of the instability depends on the geometry of the background magnetic field. The analytical model describes the behavior of the MRI in a Taylor-Couette flow, a set-up used by experimentalists in the ongoing quest to observe MRI in the laboratory (Clark & Oishi 2016a, 2016b).

  5. Development of natural circulation small and medium sized boiling water reactor: HSBWR-600

    International Nuclear Information System (INIS)

    Miki, Minoru; Horiuchi, Tetsuo; Yoshimoto, Yuichiro; Sumida, Isao; Murase, Michio; Akita, Minoru; Niino, Tsuyoshi

    1988-01-01

    In nuclear power generation, the development of large reactors has been promoted as the main energy source in Japan. However, world economy entered low growth age, and the growth of electric power demand slowed down. Accordingly, attention has been paid to the medium and small reactors that can cope with whatever needs by serializing their types in addition to the nuclear power plants of medium output matching to electric power demand. In order to cope with these new needs, the economical efficiency of medium and small reactors must be as close as possible to that of large reactors, and as the countermeasures to the demerits due to small size, those must be made into the plants having simplified systems and the safety easily acceptable to public. Hitachi Ltd. plans to develop the natural circulation type medium and small BWRs of 600 NWe output class, HSBWR-600, on the basis of the nuclear power plant technology based on the rich results of design and operation of BWRs obtained so far, and to rank them as one of the BWR series. The target of their development design, the circumstance of their development, the core design and the thermo-hydraulic characteristics, the reactor pressure vessel and in-core structures, the safety design, system design, building layout and the evaluation are reported. (Kako, I.)

  6. Near 7-day response of ocean bottom pressure to atmospheric surface pressure and winds in the northern South China Sea

    Science.gov (United States)

    Zhang, Kun; Zhu, Xiao-Hua; Zhao, Ruixiang

    2018-02-01

    Ocean bottom pressures, observed by five pressure-recording inverted echo sounders (PIESs) from October 2012 to July 2014, exhibit strong near 7-day variability in the northern South China Sea (SCS) where long-term in situ bottom pressure observations are quite sparse. This variability was strongest in October 2013 during the near two years observation period. By joint analysis with European Center for Medium-Range Weather Forecasts (ECMWF) data, it is shown that the near 7-day ocean bottom pressure variability is closely related to the local atmospheric surface pressure and winds. Within a period band near 7 days, there are high coherences, exceeding 95% significance level, of observed ocean bottom pressure with local atmospheric surface pressure and with both zonal and meridional components of the wind. Ekman pumping/suction caused by the meridional component of the wind in particular, is suggested as one driving mechanism. A Kelvin wave response to the near 7-day oscillation would propagate down along the continental slope, observed at the Qui Nhon in the Vietnam. By multiple and partial coherence analyses, we find that local atmospheric surface pressure and Ekman pumping/suction show nearly equal influence on ocean bottom pressure variability at near 7-day periods. A schematic diagram representing an idealized model gives us a possible mechanism to explain the relationship between ocean bottom pressure and local atmospheric forcing at near 7-day periods in the northern SCS.

  7. Detecting solar chameleons through radiation pressure

    CERN Document Server

    Baum, S.; Hoffmann, D.H.H.; Karuza, M.; Semertzidis, Y.K.; Upadhye, A.; Zioutas, K.

    2014-10-24

    Light scalar fields can drive the accelerated expansion of the universe. Hence, they are obvious dark energy candidates. To make such models compatible with tests of General Relativity in the solar system and "fifth force" searches on Earth, one needs to screen them. One possibility is the so-called "chameleon" mechanism, which renders an effective mass depending on the local matter density. If chameleon particles exist, they can be produced in the sun and detected on earth exploiting the equivalent of a radiation pressure. Since their effective mass scales with the local matter density, chameleons can be reflected by a dense medium if their effective mass becomes greater than their total energy. Thus, under appropriate conditions, a flux of solar chameleons may be sensed by detecting the total instantaneous momentum transferred to a suitable opto-mechanical force/pressure sensor. We calculate the solar chameleon spectrum and the reach in the chameleon parameter space of an experiment using the preliminary re...

  8. Pressure vessel for nuclear reactors

    International Nuclear Information System (INIS)

    Schulten, R.; Kugeler, K.; Kugeler, M.; Petersen, K.; Decken, C.B. von der.

    1983-01-01

    This construction of a container, which is pressure-relieved by axial-central tensioning cables or reinforcing cables distributed over the circumference, makes a reduction of the wall thickness for the floor and roof, which was previously 2.5 metres by about 40% possible, and thus reduce manufacturing and cost problems. This is achieved by an appreciable increase of the prestressing exerted by the tensioning cables as this is taken up, not by the elasticity of the roof and floor, but instead by an intermediate part of pressure-resisting material. Such a container consists of a vertical cylindrical jacket of, for example, 20 metres diameter and 18 metres height, of a roof and floor of, for example, 1.50 metres thickness each and the intermediate part, which keeps the spacing of floor and roof as a central piece. This intermediate part which is taken through seals through the container can be imagined as a double tube of outside tube diameter of, for example, 4 metres and inside tube diameter of 2 metres with both tubes having thick walls. 4 tensioning cables displaced vertically by 900 run in the cylindrical annulus between the outer and inner tubes which are brought to the required pretension, e.g. 80,000 tonnes by nuts situated on the outside. The inner tube projects through the floor and roof. Its openings act as manholes and for the introduction of pipelines. These can, for example, carry a cooling medium for a reactor core via further ducts into the inside of the container. Container wall, floor and roof and the intermediate part in the form of a double tube are made up of cast steel segments or sectors in several layers. (RW)

  9. Pressure vessel for gaseous media

    International Nuclear Information System (INIS)

    Schulten, R.; Kugeler, K.; Kugeler, M.; Petersen, K.; Decken, C.B. von der.

    1977-01-01

    This construction of a container, which is pressure relieved by axial-central tensioning cables or reinforcing cables distributed over the circumference, makes a reduction of the wall thickness for the floor and roof, which was previously 2.5 metres by about 40% possible, and thus reduce manufacturing and cost problems. This is achieved by an appreciable increase of the prestressing exerted by the tensioning cables as this is taken up, not by the elasticity of the roof and floor, but instead by an intermediate part of pressure-resisting material. Such a container consists of a vertical cylindrical jacket of, for example, 20 metres diameter and 18 metres height, of a roof and floor of, for example, 1.50 metres thickness each and the intermediate part, which keeps the spacing of floor and roof as a central piece. This intermediate part which is taken through seals through the container can be imagined as a double tube of outside tube diameter of, for example, 4 metres and inside tube diameter of 2 metres with both tubes having thick walls. 4 tensioning cables displaced vertically by 90 0 run in the cylindrical annulus between the outer and inner tubes which are brought to the required pretension, e.g. 80,000 tonnes by nuts situated on the outside. The inner tube projects through the floor and roof. Its openings act as manholes and for the introduction of pipelines. These can, for example, carry a cooling medium for a reactor core via further ducts into the inside of the container. Container wall, floor and roof and the intermediate part in the form of a double tube are made up of cast steel segments or sectors in several layers. (RW) 891 RW [de

  10. High Blood Pressure (Hypertension)

    Science.gov (United States)

    ... other risk factors, like diabetes, you may need treatment. How does high blood pressure affect pregnant women? A few women will get ... HIV, Birth Control Heart Health for Women Pregnancy Menopause More Women's Health ... High Blood Pressure--Medicines to Help You Women and Diabetes Heart ...

  11. High-pressure crystallography

    Science.gov (United States)

    Katrusiak, A.

    2008-01-01

    The history and development of high-pressure crystallography are briefly described and examples of structural transformations in compressed compounds are given. The review is focused on the diamond-anvil cell, celebrating its 50th anniversary this year, the principles of its operation and the impact it has had on high-pressure X-ray diffraction.

  12. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... OTR/L Sarah Harrison, OT Anne Bryden, OT The Role of the Social Worker after Spinal Cord Injury Patti Rogers, ... do to prevent pressure sores? play_arrow What role does diet and hydration play in ... play_arrow What are the six stages of a pressure sore and how ...

  13. Clamp Restrains Pressure Line

    Science.gov (United States)

    Aliberti, J. A.

    1982-01-01

    Safety restraint protects people and property if a high-pressure fitting fails. As long as pressure line remains attached at the fitting, clamp exerts essentially no force on hose. If fitting fails, force of fluid leaving free end of hose causes the cam on the clamp to compress hose with a positive locking action.

  14. TWO-FLUID MAGNETOHYDRODYNAMICS SIMULATIONS OF CONVERGING H I FLOWS IN THE INTERSTELLAR MEDIUM. II. ARE MOLECULAR CLOUDS GENERATED DIRECTLY FROM A WARM NEUTRAL MEDIUM?

    International Nuclear Information System (INIS)

    Inoue, Tsuyoshi; Inutsuka, Shu-ichiro

    2009-01-01

    Formation of interstellar clouds as a consequence of thermal instability is studied using two-dimensional two-fluid magnetohydrodynamic simulations. We consider the situation of converging, supersonic flows of warm neutral medium in the interstellar medium that generate a shocked slab of thermally unstable gas in which clouds form. We find, as speculated in Paper I, that in the shocked slab magnetic pressure dominates thermal pressure and the thermal instability grows in the isochorically cooling, thermally unstable slab that leads to the formation of H I clouds whose number density is typically n ∼ -3 , even if the angle between magnetic field and converging flows is small. We also find that even if there is a large dispersion of magnetic field, evolution of the shocked slab is essentially determined by the angle between the mean magnetic field and converging flows. Thus, the direct formation of molecular clouds by piling up warm neutral medium does not seem to be a typical molecular cloud formation process, unless the direction of supersonic converging flows is biased to the orientation of mean magnetic field by some mechanism. However, when the angle is small, the H I shell generated as a result of converging flows is massive and possibly evolves into molecular clouds, provided gas in the massive H I shell is piled up again along the magnetic field line. We expect that another subsequent shock wave can again pile up the gas of the massive shell and produce a larger cloud. We thus emphasize the importance of multiple episodes of converging flows, as a typical formation process of molecular clouds.

  15. The energy principle in astrophysics and the instabilities of the interstellar medium

    International Nuclear Information System (INIS)

    Lachieze-Rey, Marc.

    1976-01-01

    The interstellar medium is considered as a two-fluid mixture (a heavy thermal gas and relativistic massless gas) to which magnetohydrodynamic equations are applied: the magnetic field and current vector obey Maxwell equations, both fluids obey the mass and momentum conservation equations, their thermodynamic behaviors being described with two polytropic γ and GAMMA indices. The simplest state that may be described is the stratified state assuming an isothermal medium (the temperature is defined by the eddy motion of the clouds), a horizontal magnetic field, and three proportional pressures (the gas pressure, cosmic ray pressure, and field pressure). A one-dimensional equilibrium is obtained (depending on the distance to the galactic plane). More generally a method of stability analysis is developed: the energy principle. The principle makes the equilibrium stability versus perturbation to depend on the sign of the potential energy variation dW(x) due to the perturbation. The general case involves the solution of two differential equations, and the case where p+GAMMA.P=p is reduced to solving only one equation. In the horizontal case the stability criterion for every horizontal state is written: γ>[p+P+P(magn)/P']-GAMMA.P/p, where p, P and P(magn) are the three pressures of the thermal gas, cosmic rays, and field respectively, and the tagged ' symbols are for the drivatives with respect to the heights above the galactic plane. The result is applied to the horizontal equilibrium, this state is shown to be rather more stable than the stratified one near the galactic plane but at higher levels, perturbations tend to rapidly develop. A stability principle is also presented for the more general equilibrium: gas + magnetic field + relativistic gas [fr

  16. Pressure suppression device

    International Nuclear Information System (INIS)

    Mizumachi, Wataru; Fukuda, Akira; Kitaguchi, Hidemi; Shimizu, Toshiaki.

    1976-01-01

    Object: To relieve and absorb impact wave vibrations caused by steam and non-condensed gases releasing into the pressure suppression chamber at the time of an accident. Structure: The reactor container is filled with inert gases. A safety valve attached main steam pipe is provided to permit the excessive steam to escape, the valve being communicated with the pressure suppression chamber through an exhaust pipe. In the pressure suppression chamber, a doughnut-like cylindrical outer wall is filled at its bottom with pool water to condense the high temperature vapor released through the exhaust pipe. A head portion of a vent tube which leads the exhaust pipe is positioned at the top, and a down comer and an exhaust vent tube are locked by means of steady rests. At the bottom is mounted a pressure adsorber device which adsorbs a pressure from the pool water. (Kamimura, M.)

  17. Pressure suppression device

    International Nuclear Information System (INIS)

    Ichiki, Tadaharu; Funahashi, Toshihiro.

    1976-01-01

    Purpose: To provide a structure which permits the absorption of shocks and vibratory load produced on the floor of a pressure suppression chamber due to nitrogen gas or the like discharged into pool water in the pressure suppression chamber at the time of a loss-of-coolant accident. Constitution: A pressure suppression chamber accommodating pool water is comprised of a bottom wall and side walls constructed of concrete on the inner side of a liner. By providing concrete on the bottom surface and side wall surfaces of a pressure suppression chamber, it is possible to prevent non-condensing gas and steam exhausted from the vent duct and exhaust duct of a main vapor escapement safety valve exhaust duct from exerting impact forces and vibratory forces upon the bottom and side surfaces of the pressure suppression chamber. (Horiuchi, T.)

  18. Pressure evolution and deformation of confined granular media during pneumatic fracturing

    Science.gov (United States)

    Eriksen, Fredrik K.; Toussaint, Renaud; Turquet, Antoine Léo; Mâløy, Knut J.; Flekkøy, Eirik G.

    2018-01-01

    By means of digital image correlation, we experimentally characterize the deformation of a dry granular medium confined inside a Hele-Shaw cell due to air injection at a constant overpressure high enough to deform it (from 50 to 250 kPa). Air injection at these overpressures leads to the formation of so-called pneumatic fractures, i.e., channels empty of beads, and we discuss the typical deformations of the medium surrounding these structures. In addition we simulate the diffusion of the fluid overpressure into the medium, comparing it with the Laplacian solution over time and relating pressure gradients with corresponding granular displacements. In the compacting medium we show that the diffusing pressure field becomes similar to the Laplace solution on the order of a characteristic time given by the properties of the pore fluid, the granular medium, and the system size. However, before the diffusing pressure approaches the Laplace solution on the system scale, we find that it resembles the Laplacian field near the channels, with the highest pressure gradients on the most advanced channel tips and a screened pressure gradient behind them. We show that the granular displacements more or less always move in the direction against the local pressure gradients, and when comparing granular velocities with pressure gradients in the zone ahead of channels, we observe a Bingham type of rheology for the granular paste (the mix of air and beads), with an effective viscosity μB and displacement thresholds ∇ ⃗Pc evolving during mobilization and compaction of the medium. Such a rheology, with disorder in the displacement thresholds, could be responsible for placing the pattern growth at moderate injection pressures in a universality class like the dielectric breakdown model with η =2 , where fractal dimensions are found between 1.5 and 1.6 for the patterns.

  19. iBook – a New Medium?

    Directory of Open Access Journals (Sweden)

    Benjamin Štular

    2013-09-01

    Full Text Available EXTENDED ABSTRACT:On January 19th 2012 Apple launched iBooks®2 for iPad® - a new application for downloading digital content to the iPad - and the new software (iBooks Author® which allows creating and publishing digital content using the .iba digital format and all-new iTunes® application offering access to a variety of digitised educational content. Our aim was to test the attractiveness of the new Apple releases and the effect of a relatively easy access to the world market of digital content on the promotion of Slovenian cultural heritage. We added three books to the iTunes digital collection which might be of interest to the general public: a re-edition of a scientific monograph by Andrej Pleterski: Mythical Reality of the Carintian Dukes' Stones (Mitska stvarnost knežjega kamna in Slovenian and German version and a non-fiction iBook by Benjamin Štular: Ljubljana in the Middle Ages. Archaeological Research (Srednjeveška Ljubljana. Arheološke raziskave. The digital version of the Andrej Pleterski's book was chosen for the actuality of the topic in Slovenia and Austria. People and politicians in Carinthia were annoyed by the book contents as it was published by the Regional Museum in Klagenfurt in December 2011. While the science in this book is sound it has been abused to meet the current needs of some of the Carinthian politicians. The incident was polemically reflected in the main Slovenian newspapers, too. The non-fiction iBook was selected because of the attractiveness of the theme, besides a lot of multimedia content had already been created and could be easily published to Apple's iBookstore. All three iBooks were posted to iTunes® less than three weeks after the release of the iBooks Author application to create digital content. We wish to present our experience with the applicability of the new medium, users' feedback and access statistics. Guidelines for Apple licenses are presented. The applicability of the new medium and

  20. Hard QCD processes in the nuclear medium

    Science.gov (United States)

    Freese, Adam

    The environment inside the atomic nucleus is one of the most fascinating arenas for the study of quantum chromodynamics (QCD). The strongly-interacting nature of the nuclear medium a?ects the nature of both QCD processes and the quark-gluon structure of hadrons, allowing several unique aspects of the strong nuclear force to be investigated in reactions involving nuclear targets. The research presented in this dissertation explores two aspects of nuclear QCD: firstly, the partonic structure of the nucleus itself; and secondly, the use of the nucleus as a micro-laboratory in which QCD processes can be studied. The partonic structure of the nucleus is calculated in this work by deriving and utilizing a convolution formula. The hadronic structure of the nucleus and the quark-gluon structure of its constituent nucleons are taken together to determine the nuclear partonic structure. Light cone descriptions of short range correlations, in terms of both hadronic and partonic structure, are derived and taken into account. Medium modifications of the bound nucleons are accounted for using the color screening model, and QCD evolution is used to connect nuclear partonic structure at vastly di?erent energy scales. The formalism developed for calculating nuclear partonic structure is applied to inclusive dijet production from proton-nucleus collisions at LHC kinematics, and novel predictions are calculated and presented for the dijet cross section. The nucleus is investigated as a micro-laboratory in vector meson photoproduction reactions. In particular, the deuteron is studied in the break-up reaction gammad → Vpn, for both the φ(1020) and J/v vector mesons. The generalized eikonal approximation is utilized, allowing unambiguous separation of the impulse approximation and final state interactions (FSIs). Two peaks or valleys are seen in the angular distribution of the reaction cross section, each of which is due to an FSI between either the proton and neutron, or the

  1. Effective Medium Theory for Anisotropic Metamaterials

    KAUST Repository

    Zhang, Xiujuan

    2017-11-12

    This dissertation includes the study of effective medium theories (EMTs) and their applications in describing wave propagation in anisotropic metamaterials, which can guide the design of metamaterials. An EMT based on field averaging is proposed to describe a peculiar anisotropic dispersion relation that is linear along the symmetry line but quadratic in the perpendicular direction. This dispersion relation is associated with the topological transition of the iso-frequency contours (IFCs), suggesting interesting wave propagation behaviors from beam shaping to beam splitting. In the framework of coherent potential approximation, an analytical EMT is further developed, with the ability to build a direct connection between the microscopic structure and the macroscopic material properties, which overcomes the requirement of prior knowledge of the field distributions. The derived EMT is valid beyond the long-wavelength limit. Using the EMT, an anisotropic zero-index metamaterial is designed. Moreover, the derived EMT imposes a condition that no scattered wave is generated in the ambient medium, which suggests the input signal cannot detect any object that might exist, making it invisible. Such correspondence between the EMT and the invisibilityinspires us to explore the wave cloaking in the same framework of coherent potential approximation. To further broaden the application realm of EMT, an EMT using the parameter retrieval method is studied in the regimes where the previously-developed EMTs are no longer accurate. Based on this study, in conjunction with the EMT mentioned above, a general scheme to realize coherent perfect absorption (CPA) in anisotropic metamaterials is proposed. As an exciting area in metamaterials, the field of metasurfaces has drawn great attention recently. As an easily attainable device, a grating may be the simplest version of metasurfaces. Here, an analytical EMT for gratings made of cylinders is developed by using the multiple scattering

  2. Pulse pressure and diurnal blood pressure variation

    DEFF Research Database (Denmark)

    Knudsen, Søren Tang; Poulsen, Per Løgstrup; Hansen, Klavs Würgler

    2002-01-01

    BACKGROUND: In nondiabetic subjects pulse pressure (PP) is an independent predictor of cardiovascular disease and microalbuminuria. Reduced circadian blood pressure (BP) variation is a potential risk factor for the development of diabetic complications. We investigated the association between...... retinopathy, nephropathy, macrovascular disease, PP, and diurnal BP variation in a group of type 2 diabetic patients. METHODS: In 80 type 2 diabetic patients we performed 24-h ambulatory BP (AMBP) and fundus photographs. Urinary albumin excretion was evaluated by urinary albumin/creatinine ratio. Presence...... and 3-6 had higher PP and blunted diurnal BP variation: night PP 55 +/- 10 mm Hg, 64 +/- 10 mm Hg, 61 +/- 15 mm Hg, P groups (45 normo-, 19 micro-, and 15...

  3. Strain engineered pyrochlore at high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Rittman, Dylan R.; Turner, Katlyn M.; Park, Sulgiye; Fuentes, Antonio F.; Park, Changyong; Ewing, Rodney C.; Mao, Wendy L.

    2017-05-22

    Strain engineering is a promising method for next-generation materials processing techniques. Here, we use mechanical milling and annealing followed by compression in diamond anvil cell to tailor the intrinsic and extrinsic strain in pyrochlore, Dy2Ti2O7 and Dy2Zr2O7. Raman spectroscopy, X-ray pair distribution function analysis, and X-ray diffraction were used to characterize atomic order over short-, medium-, and long-range spatial scales, respectively, under ambient conditions. Raman spectroscopy and X-ray diffraction were further employed to interrogate the material in situ at high pressure. High-pressure behavior is found to depend on the species and concentration of defects in the sample at ambient conditions. Overall, we show that defects can be engineered to lower the phase transformation onset pressure by ~50% in the ordered pyrochlore Dy2Zr2O7, and lower the phase transformation completion pressure by ~20% in the disordered pyrochlore Dy2Zr2O7. These improvements are achieved without significantly sacrificing mechanical integrity, as characterized by bulk modulus.

  4. SPIRT. Stress-Strains from Transient Pressures

    Energy Technology Data Exchange (ETDEWEB)

    Siefken, L.J. [EG and G Idaho, Inc., Idaho Falls, ID, (United States)

    1992-03-03

    The SPIRT (Stress-strains from Pressures Instigated by Reactor Transients) program was developed to predict the pressure generated by the rapid dispersal of molten UO2 from power-reactor-type fuel rods into the coolant water. This rapid dispersal of molten fuel results from very high-power excursions initiated by the rapid insertion of reactivity. SPIRT was used in the safety analyses of the ATR and ETR. The program can analyze the response of one-dimensional plane, cylindrical, and spherical geometric configurations to pressure-generating heat sources with free-surface or fixed-surface boundary conditions. SPIRT can calculate the response of systems to the dispersal of hot fuel particles as a function of the following variables: enthalpy of fuel at time of dispersal, rate at which fuel is dispersed, size of dispersed fuel droplets, dispersal density of fuel (grams of fuel dispersed per cc of water), quality of water at time of fuel dispersal, enthalpy of water at time of fuel dispersal, system pressure at time of fuel dispersal, and the size and constituency of the medium enveloping the dispersed fuel. By holding all but one of the listed variables constant, and varying that one, the program computes the relative effect of that variable upon the response of systems to the dispersal of hot fuel. SPIRT exists as two releases one, written for UO2 fuel is called SPIRTU; the second, for uranium-aluminide fuel is identified as SPIRTA.

  5. IMPLEMENTING SMALL AND MEDIUM IT PROJECTS IN SMALL AND MEDIUM ENERPRISES

    Directory of Open Access Journals (Sweden)

    Felix DUMITRESCU

    2014-06-01

    Full Text Available Information technology is essential nowadays for all companies. Small enterprises are an important part of the economy and this article aims at providing some useful insight in implementing modern IT projects to their benefit. Due to the limited funding available for the IT infrastructure in most start-ups and small businesses, the projects should be adapted to fulfill the needs of the company for the lowest cost. The paper will start by defining small and medium project management theory and outlining the target of the study, small and medium sized companies. Next it will show a number of case studies of IT projects implemented in different types of small companies in Romania. Based on these implementations the article will draw some conclusions relevant to most small companies which need to design or improve their IT infrastructure.

  6. Comparing Pore-scale and Macro-scale Capillary Pressure Measurements Using a Two- dimensional Micromodel

    Science.gov (United States)

    Brown, K. I.; Porter, M. L.; Wildenschild, D.

    2007-12-01

    Capillary pressure plays a critical role in multiphase flow and transport in porous media. At the pore scale, capillary pressure is defined by Laplace's law which states that capillary pressure is a function of surface tension, contact angle and curvature. This study focuses on imaging and estimating pore scale properties that determine capillary pressure. Drainage and imbibition experiments for a NAPL-water system are conducted in a two-dimensional micro-scale porous medium. High resolution images of the phase distributions and associated interfaces within the pores are collected during the experiments. Images are taken at a rate of approximately 50 frames per second with a resolution between 1-10 ìm per pixel. In addition, the pressure in each phase is measured with a transducer outside the porous medium, and pressure-saturation curves are plotted from the data. We will attempt to use Laplace's Law to estimate the average pressure inside the porous medium based on measured curvatures. The two pressure values (measured outside the system versus calculated via Laplace's Law) will be compared. The images will allow for investigation of pore scale properties during dynamic flow conditions, as well as static conditions, and importantly, allow for comparison among the two situations. Specifically, relaxation of menisci interfaces and resulting changes in interface curvature, and thus capillary pressure, will be correlated to variations in system properties such as fluid-fluid viscosities and flow rates.

  7. Long-Term Strength of a Thick-Walled Pipe Filled with an Aggressive Medium, with Account for Damageability of the Pipe Material and Residual Strength

    Science.gov (United States)

    Piriev, S. A.

    2018-01-01

    This paper describes the study of scattered fracture of a thick-walled pipe filled with an aggressive medium, which creates uniform pressure on the inner surface of the pipe. It is assumed that the aggressive medium affects only the value of instantaneous strength. Damageability is described by an integral operator of the hereditary type. The problem is solved with allowance for residual strength of the pipe material behind the fracture front. Numerical calculation is carried out, and relationships between the fracture front coordinate and time for various concentrations of the aggressive medium and residual strength behind the fracture front are constructed.

  8. Incorporation of the university practice medium and its transformation into the community medium

    OpenAIRE

    Šula, Tomáš; Čada, Jan; Jurásek, Martin

    2015-01-01

    The contribution comprehensively describes an eight-year research process of incorporation of the university television broadcasting into the educational university process. The result is the implementation of a practice and community medium into the university structure. The sample process is verified on the basis of triangulation in a theoretical and empirical research with the analysis of a three-year operation of a university television broadcasting called the NEON TV on the ground of Tom...

  9. ATMEA and medium power reactors. The ATMEA joint venture and the ATMEA1 medium power reactor

    International Nuclear Information System (INIS)

    Mathet, Eric; Castello, Gerard

    2012-01-01

    This Power Point presentation presents the ATMEA company (a joint venture of Areva and Mitsubishi), the main features of its medium power reactor (ATMEA1) and its building arrangement, indicates the general safety objectives. It outlines the features of its robust design which aim at protecting, cooling down and containing. It indicates the regulatory and safety frameworks, comments the review of the safety options by the ASN and the results of this assessment

  10. A note on the effective medium theory of random resistive-reactive medium

    International Nuclear Information System (INIS)

    Kumar, N.; Jayannavar, A.M.

    1981-06-01

    The effective medium theory for a system with randomly distributed point conductivity and polarizability is re-formulated, with attention to cross-terms involving the two disorder parameters. The treatment reveals a certain inconsistency of the conventional theory owing to the neglect of the Maxwell-Wagner effect. The results are significant for the critical resistivity and dielectric anomalies of a binary liquid mixture at the phase-separation point. (author)

  11. Gamma rays from the interstellar medium

    International Nuclear Information System (INIS)

    Bloemen, J.B.G.M.

    1985-01-01

    This thesis describes new gamma-ray views on cosmic rays and the interstellar medium. The author describes the COS-B data base and the pre-launch and in-flight calibration data used for all analyses. Diffuse galactic gamma radiation (> 50 MeV) may be either a result of cosmic-ray-matter interactions, or of the cosmic-ray electrons with the interstellar radiation field (mainly at optical and infrared wavelengths), through the inverse-Compton process. A detailed comparison between the gamma-ray observations of the large complex of interstellar clouds in Orion and Monoceros and the CO and HI surveys of this region is given. It gives insight into the cloud penetration of cosmic rays and in the relation between CO detections and molecular hydrogen column densities. Next, the radial distribution of gamma rays in the Galaxy is studied, as well as the galactic centre (more precisely, the central 400 pc), which contains a large concentration of CO molecules. The H 2 /CO abundance and the cosmic-ray density in the galactic centre are discussed and compared to the findings for the galactic disk. In various analyses in this thesis a likelihood-ratio method is applied for parameter estimation and hypothesis testing. A general description of this method is added as an appendix. (Auth.)

  12. Microscopic optical potential at medium energies

    International Nuclear Information System (INIS)

    Malecki, A.

    1979-01-01

    The problems concerning a microscopic optical model for the elastic nuclear collisions at medium energies are discussed. We describe the method for constructing the optical potential which makes use of the particular properties of quantum scattering in the eikonal limit. The resulting potential is expressed in terms of the nuclear wave functions and the nucleon-nucleon scattering amplitudes. This potential has a dynamic character since by including the effects of multiple scattering it allows for the possibility of intermediate excitations of the projectile and target nuclei. The use of the potential in the exact wave equation accounts for the most important mechanisms present in the collisions between composite particles. The microscopic optical model was successfully applied in the analysis of elastic scattering of protons and α-particles on atomic nuclei in the energy range of 300-1000 MeV/nucleon. The dynamic optical potential in this case represents a considerable improvement over the eikonal Glauber model and the static optical potential of Watson. The possibilities to extend the microscopic description of the proton-nucleus interaction by considering the spin dependence of the elementary amplitude and the Majorana exchange effects were investigated. (author)

  13. Magneto Binary Nanofluid Convection in Porous Medium

    Directory of Open Access Journals (Sweden)

    Jyoti Sharma

    2016-01-01

    Full Text Available The effect of an externally impressed magnetic field on the stability of a binary nanofluid layer in porous medium is considered in this work. The conservation equations related to the system are solved using normal mode technique and Galerkin method to analyze the problem. The complex expressions are approximated to get useful results. Mode of heat transfer is stationary for top heavy distribution of nanoparticles in the fluid layer and top heavy nanofluids are very less stable than regular fluids. Oscillatory motions are possible for bottom heavy distribution of nanoparticles and they are not much influenced by properties of different nanoparticles. A comparative analysis of the instability of water based nanofluids with metallic (Cu, Ag and semiconducting (TiO2, SiO2 nanoparticles under the influence of magnetic field is examined. Semiconducting nanofluids are found to be more stable than metallic nanofluids. Porosity destabilizes the layer while solute difference (at the boundaries of the layer stabilizes it. Magnetic field stabilizes the fluid layer system significantly.

  14. SILICATE COMPOSITION OF THE INTERSTELLAR MEDIUM

    Energy Technology Data Exchange (ETDEWEB)

    Fogerty, S.; Forrest, W.; Watson, D. M.; Koch, I. [Department of Physics and Astronomy, University of Rochester, Rochester, NY 14627 (United States); Sargent, B. A., E-mail: sfogerty@pas.rochester.edu [Center for Imaging Science and Laboratory for Multiwavelength Astrophysics, Rochester Institute of Technology, 54 Lomb Memorial Drive, Rochester, NY 14623 (United States)

    2016-10-20

    The composition of silicate dust in the diffuse interstellar medium and in protoplanetary disks around young stars informs our understanding of the processing and evolution of the dust grains leading up to planet formation. An analysis of the well-known 9.7 μ m feature indicates that small amorphous silicate grains represent a significant fraction of interstellar dust and are also major components of protoplanetary disks. However, this feature is typically modeled assuming amorphous silicate dust of olivine and pyroxene stoichiometries. Here, we analyze interstellar dust with models of silicate dust that include non-stoichiometric amorphous silicate grains. Modeling the optical depth along lines of sight toward the extinguished objects Cyg OB2 No. 12 and ζ Ophiuchi, we find evidence for interstellar amorphous silicate dust with stoichiometry intermediate between olivine and pyroxene, which we simply refer to as “polivene.” Finally, we compare these results to models of silicate emission from the Trapezium and protoplanetary disks in Taurus.

  15. The physical state of the intergalactic medium

    International Nuclear Information System (INIS)

    Barcons, X.; Fabian, A.C.; Rees, M.J.

    1991-01-01

    Because the process of galaxy formation is most unlikely to be perfectly efficient, there is a strong possibility that some baryonic gas remains outside collapsed structures such as galaxies and clusters of galaxies. What fraction of the baryonic content of the Universe resides in this intergalactic medium (IGM) and what physical state it is in are open questions. Here we use observational limits on the density of neutral hydrogen in the IGM, on the lack of deviations from a black-body spectrum of the cosmic microwave background (MBR), and on the extragalactic component of the soft X-ray background (XRB) to constrain the state of the IGM. From the lack of MBR fluctuations, any energetic IGM (containing as much energy as the binding energy in galaxies) is inferred to be smoothly distributed on scales greater than galactic. This rules out hot IGM models for the origin of the hard X-ray background, as well as the hypothesis that cosmic explosions may have given rise to cosmological structure on scales larger than galaxies. (author)

  16. SILICATE COMPOSITION OF THE INTERSTELLAR MEDIUM

    International Nuclear Information System (INIS)

    Fogerty, S.; Forrest, W.; Watson, D. M.; Koch, I.; Sargent, B. A.

    2016-01-01

    The composition of silicate dust in the diffuse interstellar medium and in protoplanetary disks around young stars informs our understanding of the processing and evolution of the dust grains leading up to planet formation. An analysis of the well-known 9.7 μ m feature indicates that small amorphous silicate grains represent a significant fraction of interstellar dust and are also major components of protoplanetary disks. However, this feature is typically modeled assuming amorphous silicate dust of olivine and pyroxene stoichiometries. Here, we analyze interstellar dust with models of silicate dust that include non-stoichiometric amorphous silicate grains. Modeling the optical depth along lines of sight toward the extinguished objects Cyg OB2 No. 12 and ζ Ophiuchi, we find evidence for interstellar amorphous silicate dust with stoichiometry intermediate between olivine and pyroxene, which we simply refer to as “polivene.” Finally, we compare these results to models of silicate emission from the Trapezium and protoplanetary disks in Taurus.

  17. From medium-sized to megawatt turbines...

    Energy Technology Data Exchange (ETDEWEB)

    Dongen, W. van [NedWind bv, Rhenen (Netherlands)

    1996-12-31

    One of the world`s first 500 kW turbines was installed in 1989 in the Netherlands. This forerunner of the current NedWind 500 kW range also represents the earliest predesign of the NedWind megawatt turbine. After the first 500 kW turbines with steel rotor blades and rotor diameter of 34 m, several design modifications followed, e.g. the rotor diameter was increased to 35 m and a tip brake was added. Later polyester blades were introduced and the rotor diameter was increased with 5 in. The drive train was also redesigned. Improvements on the 500 kW turbine concept has resulted in decreased cost, whereas annual energy output has increased to approx. 1.3 million kWh. Wind energy can substantially contribute to electricity supply. Maximum output in kiloWatthours is the target. Further improvement of the existing technology and implementation of flexible components may well prove to be a way to increase energy output, not only in medium or large sized wind turbines. 7 figs.

  18. UV observations of local interstellar medium.

    Science.gov (United States)

    Kurt, V.; Mironova, E.; Fadeev, E.

    2008-12-01

    The methods of the interstellar matter study are described. The brief information of space missions aimed at observations in the unreachable for ground based telescopes UV spectral range (IUE, As- tron, HST and GALEX.) is presented. The history of discovery of H and He atoms entering the Solar System from the local interstellar medium (LISM) is given in brief. The results of observations performed by the group from Stern- berg Astronomical Institute (SAI MSU) and Space Research Institute (IKI RAS) performed with the help of the missions Prognoz-5, Prognoz-6 and the stations Zond-1, Venera and Mars and aimed at estimation of all basic LISM parameters (the velocity of the Sun in relation to LISM, directions of movement, densities of H and He atoms, LISM temperature) are presented. We also describe the present-day investigations of LISM performed with SOHO and ULYSSES mis- sions including the direct registration of He atoms entering the Solar System. The problem of interaction between the incoming flow of the ISM atoms ("in- terstellar wind") and the area of two shocks at the heliopause border (100-200 AU) is discussed. The LISM parameters obtained using the available data are presented in two tables.

  19. Learning intrinsic excitability in medium spiny neurons.

    Science.gov (United States)

    Scheler, Gabriele

    2013-01-01

    We present an unsupervised, local activation-dependent learning rule for intrinsic plasticity (IP) which affects the composition of ion channel conductances for single neurons in a use-dependent way. We use a single-compartment conductance-based model for medium spiny striatal neurons in order to show the effects of parameterization of individual ion channels on the neuronal membrane potential-curent relationship (activation function). We show that parameter changes within the physiological ranges are sufficient to create an ensemble of neurons with significantly different activation functions. We emphasize that the effects of intrinsic neuronal modulation on spiking behavior require a distributed mode of synaptic input and can be eliminated by strongly correlated input. We show how modulation and adaptivity in ion channel conductances can be utilized to store patterns without an additional contribution by synaptic plasticity (SP). The adaptation of the spike response may result in either "positive" or "negative" pattern learning. However, read-out of stored information depends on a distributed pattern of synaptic activity to let intrinsic modulation determine spike response. We briefly discuss the implications of this conditional memory on learning and addiction.

  20. Business Model Innovation for Small Medium Enterprises

    Directory of Open Access Journals (Sweden)

    Wirania Swasty

    2015-09-01

    Full Text Available Indonesian economy through Small Medium Enterprises (SMEs is expected to absorb labor and contribute to the growth of Gross Domestic Product. However, SMEs lack both managerial and technical skills. This research is about business model innovation for SMEs especially in fashion and garment industry. Study used qualitative approach by mentoring four selected SMEs in Babakan Penghulu Village– Cinambo Sub-District, Eastern Bandung. The tools used to analyze them including PEST analysis, Porter’s Five Forces,Resource Based View, Value Chain Analysis and Business Model Canvas. Finding suggests SMEs to have business model innovation derived from value proposition. SMEs should build their own brand awareness. Moreover, as garment and fashion industry, design can be a particularly important part of the Value Proposition. SMEs could communicate its value propositions and inform their service through its official websites and other social media. Since the intangible resources include brand and design, thus SMEs should build brand image and innovate year by year. SMEs must hire designers and launch a series of new products offers under the signature of their own brands. Ideation to strengthen strategies derives from value proposition building block as a starting point. Moreover, Business Model Canvas makes strategy more focused and measurable. Business model innovation is expected to increase overall performance of SMEs.

  1. Evaluation of insulin medium or chondrogenic medium on proliferation and chondrogenesis of ATDC5 cells.

    Science.gov (United States)

    Yao, Yongchang; Zhai, Zhichen; Wang, Yingjun

    2014-01-01

    The ATDC5 cell line is regarded as an excellent cell model for chondrogenesis. In most studies with ATDC5 cells, insulin medium (IM) was used to induce chondrogenesis while chondrogenic medium (CM), which was usually applied in chondrogenesis of mesenchymal stem cells (MSCs), was rarely used for ATDC5 cells. This study was mainly designed to investigate the effect of IM, CM, and growth medium (GM) on chondrogenesis of ATDC5 cells. ATDC5 cells were, respectively, cultured in IM, CM, and GM for a certain time. Then the proliferation and the chondrogenesis progress of cells in these groups were analyzed. Compared with CM and GM, IM promoted the proliferation of cells significantly. CM was effective for enhancement of cartilage specific markers, while IM induced the cells to express endochondral ossification related genes. Although GAG deposition per cell in CM group was significantly higher than that in IM and GM groups, the total GAG contents in IM group were the most. This study demonstrated that CM focused on induction of chondrogenic differentiation while IM was in favor of promoting proliferation and expression of endochondral ossification related genes. Combinational use of these two media would be more beneficial to bone/cartilage repair.

  2. Evaluation of Insulin Medium or Chondrogenic Medium on Proliferation and Chondrogenesis of ATDC5 Cells

    Directory of Open Access Journals (Sweden)

    Yongchang Yao

    2014-01-01

    Full Text Available Background. The ATDC5 cell line is regarded as an excellent cell model for chondrogenesis. In most studies with ATDC5 cells, insulin medium (IM was used to induce chondrogenesis while chondrogenic medium (CM, which was usually applied in chondrogenesis of mesenchymal stem cells (MSCs, was rarely used for ATDC5 cells. This study was mainly designed to investigate the effect of IM, CM, and growth medium (GM on chondrogenesis of ATDC5 cells. Methods. ATDC5 cells were, respectively, cultured in IM, CM, and GM for a certain time. Then the proliferation and the chondrogenesis progress of cells in these groups were analyzed. Results. Compared with CM and GM, IM promoted the proliferation of cells significantly. CM was effective for enhancement of cartilage specific markers, while IM induced the cells to express endochondral ossification related genes. Although GAG deposition per cell in CM group was significantly higher than that in IM and GM groups, the total GAG contents in IM group were the most. Conclusion. This study demonstrated that CM focused on induction of chondrogenic differentiation while IM was in favor of promoting proliferation and expression of endochondral ossification related genes. Combinational use of these two media would be more beneficial to bone/cartilage repair.

  3. Pressure ulcers: treatment.

    Science.gov (United States)

    Reddy, Madhuri

    2015-12-11

    Unrelieved pressure or friction of the skin, particularly over bony prominences, can lead to pressure ulcers in up to one third of people in hospitals or community care, and one fifth of nursing home residents. Pressure ulcers are more likely in people with reduced mobility and poor skin condition, such as older people or those with vascular disease. We conducted a systematic overview, aiming to answer the following clinical question: What are the effects of treatments in people with pressure ulcers? We searched: Medline, Embase, The Cochrane Library, and other important databases up to January 2014 (Clinical Evidence overviews are updated periodically; please check our website for the most up-to-date version of this overview). At this update, searching of electronic databases retrieved 307 studies. After deduplication and removal of conference abstracts, 203 records were screened for inclusion in the overview. Appraisal of titles and abstracts led to the exclusion of 163 studies and the further review of 40 full publications. Of the 40 full articles evaluated, seven systematic reviews and two RCTs were added at this update. We performed a GRADE evaluation for 15 PICO combinations. In this systematic overview, we categorised the efficacy for 15 interventions based on information about the effectiveness and safety of air-fluidised supports, alternating-pressure surfaces (including mattresses), debridement, dressings, electrotherapy, hyperbaric oxygen, low-air-loss beds, low-level laser therapy, low-tech constant-low-pressure supports, nutritional supplements, seat cushions, surgery, therapeutic ultrasound, topical negative pressure, and topical phenytoin.

  4. Pressure Ulcers Surveillance Report

    Directory of Open Access Journals (Sweden)

    Zehra Esin Gencer

    2015-04-01

    Full Text Available Objective: Pressure ulcer is a chronic wound. It reduces the quality of life of the elderly and individuals with restricted range of motion. It prolongs hospital stay and increases the risk of complications. The cost is quite high. Preventive actions for the prevention of pressure ulcers should be developed. Planning protocols and standards of care are among the main targets. Material and Method: Research was conducted in one-year period between 2012 May and 2013 May on patients who were followed up in Akdeniz University Hospital clinics and intensive care unit with pressure ulcers. The research population consisted of 569 patients. Patient data were recorded in SPSS 16 for Windows program. Statistical analyzes were performed with retrospective methods. The demographic characteristics of patients with pressure ulcers were analyzed as frequency and descriptive statistics. Prevalence and incidence of one year were calculated. Results: Of the patients, 58% were males, 42% were females. Of the patients, 36% were in the age range of 61-80 years, and their average length of stay was 42,9 days. Of the patients, 70% were at stage 2 and 3. In 15% of patients pressure ulcers occurred on the first day of hospitalization. Pressure ulcers were developed between days 2 and 10 in 59% of the patients. Prevalence rate was 2.5%, the incidence was 1.9%, the prevalence rate was 5.9% in the intensive care unit. Conclusion: It is easier to prevent pressure ulcers than treating.

  5. Compressibility and collisional effect on thermal instability of a partially ionized medium

    International Nuclear Information System (INIS)

    Sharma, R.C.; Sharma, K.C.

    1978-01-01

    The thermal instability of a finitely conducting hydromagnetic composite and compressible medium is studied to include the frictional effects with neutrals. The effect of compressibility is found to be stabilizing. In contrast to the nonoscillatory modes for (Csub(p/g)β>1 in the absence of a magnetic field; Csub(p),β and g being specific heat at constant pressure, uniform adverse temperature gradient and acceleration due to gravity respectively, the presence of magnetic field introduces oscillatory modes in the system. The overstable case is also discussed. The magnetic field is found to have a stabilizing effect on the system for (Csub(p/g))β>1. (author)

  6. Superconductivity under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Amaya, K.; Shimizu, K.; Takeda, K.; Tateiwa, N.; Muramatsu, T.; Ishizuka, M.; Kobayashi, T.C

    2003-05-01

    In part 1, we review techniques developed in our laboratory for producing the complex extreme condition of very low temperature and ultra-high pressure and those for measuring electrical resistance and magnetization of the sample confined in the extremely small space of the used pressure cell. In part 2, we review our experimental results in search for pressure-induced superconductivity, which have been obtained by the use of developed techniques. Typical examples are shown in the case of simple inorganic and organic molecular crystals, ionic crystals, and magnetic metals.

  7. High pressure induced superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Amaya, K.; Shimizu, K

    2003-10-15

    We have developed complex extreme condition of very low temperature down to 30 mK and ultra high pressure exceeding 200 GPa by assembling compact diamond anvil cell (DAC) on a powerful {sup 3}He/{sup 4}He dilution refrigerator. We have also developed measuring techniques of electrical resistance, magnetization and optical measurement for the sample confined in the sample space of the DAC. Using the newly developed apparatus and techniques, we have searched for superconductivity in various materials under pressure. In this paper, we will shortly review our newly developed experimental apparatus and techniques and discuss a few examples of pressure induced superconductivity which were observed recently.

  8. Atmospheric Pressure During Landing

    Science.gov (United States)

    1997-01-01

    This figure shows the variation with time of pressure (dots) measured by the Pathfinder MET instrument during the landing period shown in image PIA00797. The two diamonds indicate the times of bridal cutting and 1st impact. The overall trend in the data is of pressure increasing with time. This is almost certainly due to the lander rolling downhill by roughly 10 m. The spacing of the horizontal dotted lines indicates the pressure change expected from 10 m changes in altitude. Bounces may also be visible in the data.

  9. SENSITIVE PRESSURE GAUGE

    Science.gov (United States)

    Ball, W.P.

    1961-01-01

    An electron multiplier device is described. It has a plurality of dynodes between an anode and cathode arranged to measure pressure, temperature, or other environmental physical conditions that proportionately iinfuences the quantity of gas molecules between the dynodes. The output current of the device is influenced by the reduction in electron multiplication at the dynodes due to energy reducing collisions of the electrons with the gas molecules between the dynodes. More particularly, the current is inversely proportional to the quantity of gas molecules, viz., the gas pressure. The device is, hence, extremely sensitive to low pressures.

  10. The effects of protoype medium on usability testing.

    Science.gov (United States)

    Boothe, Chase; Strawderman, Lesley; Hosea, Ethan

    2013-11-01

    Inconsistencies among testing methods and results in previous research prompted this study that builds upon a systematic usability testing research framework to better understand how interface medium influences users' abilities to detect usability flaws in applications. Interface medium was tested to identify its effects on users' perceptions of usability and abilities to detect usability problems and severe usability problems. Results indicated that medium has no effect on users' abilities to detect usability problems or perceptions of usability. However, results did indicate an interaction between the medium and the tested application in which users were able to identify significantly more usability problems on a higher fidelity medium using a particular application. Results also indicated that as users' perceptions of an application's usability increases, the users are less able to detect usability problems in that application. Usability testing should begin early in the design process, even if low fidelity mediums will be used. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  11. The impact of star formation feedback on the circumgalactic medium

    Science.gov (United States)

    Fielding, Drummond; Quataert, Eliot; McCourt, Michael; Thompson, Todd A.

    2017-04-01

    We use idealized 3D hydrodynamic simulations to study the dynamics and thermal structure of the circumgalactic medium (CGM). Our simulations quantify the role of cooling, stellar feedback driven galactic winds and cosmological gas accretion in setting the properties of the CGM in dark matter haloes ranging from 1011 to 1012 M⊙. Our simulations support a conceptual picture in which the properties of the CGM, and the key physics governing it, change markedly near a critical halo mass of Mcrit ≈ 1011.5 M⊙. As in calculations without stellar feedback, above Mcrit halo gas is supported by thermal pressure created in the virial shock. The thermal properties at small radii are regulated by feedback triggered when tcool/tff ≲ 10 in the hot gas. Below Mcrit, however, there is no thermally supported halo and self-regulation at tcool/tff ˜ 10 does not apply. Instead, the gas is out of hydrostatic equilibrium and largely supported against gravity by bulk flows (turbulence and coherent inflow/outflow) arising from the interaction between cosmological gas inflow and outflowing galactic winds. In these lower mass haloes, the phase structure depends sensitively on the outflows' energy per unit mass and mass-loading, which may allow measurements of the CGM thermal state to constrain the nature of galactic winds. Our simulations account for some of the properties of the multiphase halo gas inferred from quasar absorption line observations, including the presence of significant mass at a wide range of temperatures, and the characteristic O VI and C IV column densities and kinematics. However, we underpredict the neutral hydrogen content of the z ˜ 0 CGM.

  12. Pressure Ulcer Prevention

    Science.gov (United States)

    2009-01-01

    Executive Summary In April 2008, the Medical Advisory Secretariat began an evidence-based review of the literature concerning pressure ulcers. Please visit the Medical Advisory Secretariat Web site, http://www.health.gov.on.ca/english/providers/program/mas/tech/tech_mn.html to review these titles that are currently available within the Pressure Ulcers series. Pressure ulcer prevention: an evidence based analysis The cost-effectiveness of prevention strategies for pressure ulcers in long-term care homes in Ontario: projections of the Ontario Pressure Ulcer Model (field evaluation) Management of chronic pressure ulcers: an evidence-based analysis (anticipated pubicstion date - mid-2009) Purpose A pressure ulcer, also known as a pressure sore, decubitus ulcer, or bedsore, is defined as a localized injury to the skin/and or underlying tissue occurring most often over a bony prominence and caused by pressure, shear, or friction, alone or in combination. (1) Those at risk for developing pressure ulcers include the elderly and critically ill as well as persons with neurological impairments and those who suffer conditions associated with immobility. Pressure ulcers are graded or staged with a 4-point classification system denoting severity. Stage I represents the beginnings of a pressure ulcer and stage IV, the severest grade, consists of full thickness tissue loss with exposed bone, tendon, and or muscle. (1) In a 2004 survey of Canadian health care settings, Woodbury and Houghton (2) estimated that the prevalence of pressure ulcers at a stage 1 or greater in Ontario ranged between 13.1% and 53% with nonacute health care settings having the highest prevalence rate (Table 1). Executive Summary Table 1: Prevalence of Pressure Ulcers* Setting Canadian Prevalence,% (95% CI) Ontario Prevalence,Range % (n) Acute care 25 (23.8–26.3) 23.9–29.7 (3418) Nonacute care† 30 (29.3–31.4) 30.0–53.3 (1165) Community care 15 (13.4–16.8) 13.2 (91) Mixed health care‡ 22 (20.9

  13. Effect of Acidity of a Medium on Riboflavin Photodestruction

    Science.gov (United States)

    Astanov, S. Kh.; Turdiev, M.; Sharipov, M. Z.; Kurtaliev, É. N.; Nizomov, N. N.

    2016-03-01

    Effect of acidity of a medium on the spectroscopic characteristics of riboflavin aqueous solutions is investigated by the method of fluorescent and absorption spectroscopy. Significant deformation of the electronic spectra of riboflavin aqueous solutions irradiated with unfiltered light of a PRK-2 lamp is observed. It is established that riboflavin photostability in an acid medium is about twice as much as the photostability in a neutral medium, which is caused by the formation of a protonated species.

  14. Small and medium size companies competiveness in Croatian regional framework

    OpenAIRE

    Zlatan Fröhlich

    2013-01-01

    Small and medium enterprises (SMEs) represent an important part of the Croatian economy. In 2011 SMEs achieved a share of 50.2% of gross domestic product (GDP), 65.5% of employment and 42% of Croatian exports. In the paper will be elaborated importance of the small and medium enterprise sector in Croatia as well as presented institutional and legislative framework for the small and medium enterprise sector in Croatia and describe distribution of competences for making policy decisions related...

  15. Effect of genotypes and culture medium on shoot regeneration and ...

    African Journals Online (AJOL)

    For proliferation, regenerated shoots in TDZ were subcultured in medium supplemented with 0.2, 0.4 and 0.6 mg/l TDZ, 2 mg/l BA or 2 mg/l Kin and regenerated shoots in BA were subcultured on the induction medium. In the second phase, mediums of MS, 1/2 MS, MS with 1/2 NH4NO3 and KNO3 concentration (MS-1/2N), ...

  16. Pressure Safety Orientation Live #769

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-17

    Pressure Safety Orientation (course #769) introduces workers at Los Alamos National Laboratory (LANL) to the Laboratory Pressure Safety Program and to pressure-related hazards. This course also affords a hands-on exercise involving the assembly of a simple pressure system. This course is required for all LANL personnel who work on or near pressure systems and are exposed to pressure-related hazards. These personnel include pressure-system engineers, designers, fabricators, installers, operators, inspectors, maintainers, and others who work with pressurized fluids and may be exposed to pressure-related hazards.

  17. [Negative pressure therapy: NPT].

    Science.gov (United States)

    Maillard, H

    2015-01-01

    Negative pressure therapy or treatment (NPT) is used very frequently in hospitals in both surgical and medical departments. NPT consists of maintaining the wound surface at a pressure below ambient atmospheric pressure by means of a specially designed dressing attached to a depressurisation device as well as a system to drain exudate. NPT has been shown to be beneficial in increasing blood flow, thanks to feedback resulting from the decreased oxygen pressure, angiogenesis and reduction of the wound surface area. The French Health Authority (HAS) has issued recommendations for good use in a specific and limited series of applications. NPT may be used in post-traumatic or post-surgical wounds, burns, and in chronic wounds, such as bedsores and ulcers. It is also effective as an adjuvant treatment for infected wounds. In recent years, various different NPT devices have become commercially available. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  18. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... play_arrow What parts of the body are most likely to develop pressure sores? play_arrow Is ... daily skin inspections? play_arrow What are the most important things for someone with a spinal cord ...

  19. Gasoline Reid Vapor Pressure

    Science.gov (United States)

    EPA regulates the vapor pressure of gasoline sold at retail stations during the summer ozone season to reduce evaporative emissions from gasoline that contribute to ground-level ozone and diminish the effects of ozone-related health problems.

  20. Reactor pressure vessel support

    International Nuclear Information System (INIS)

    Butti, J.P.

    1978-01-01

    A link and pin support system provides the primary vertical and lateral support for a nuclear reactor pressure vessel without restricting thermally induced radial and vertical expansion and contraction

  1. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing ...

  2. On Time Performance Pressure

    Science.gov (United States)

    Connell, Linda; Wichner, David; Jakey, Abegael

    2013-01-01

    Within many operations, the pressures for on-time performance are high. Each month, on-time statistics are reported to the Department of Transportation and made public. There is a natural tendency for employees under pressure to do their best to meet these objectives. As a result, pressure to get the job done within the allotted time may cause personnel to deviate from procedures and policies. Additionally, inadequate or unavailable resources may drive employees to work around standard processes that are seen as barriers. However, bypassing practices to enable on-time performance may affect more than the statistics. ASRS reports often highlight on-time performance pressures which may result in impact across all workgroups in an attempt to achieve on-time performance. Reporters often provide in-depth insights into their experiences which can be used by industry to identify and focus on the implementation of systemic fixes.

  3. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries ... LLC Understanding Spinal Cord Injury About Us Expert Videos Contact Us Personal Experience Videos Blog Videos By ...

  4. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores ... sores? What is a Spinal Cord Injury? SCI Medical Experts People Living With SCI Personal Experiences By ...

  5. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from ... Rosenberg, PsyD Understanding SCI Rehabilitation Donald Peck Leslie, MD Adjusting to Social Life in a Wheelchair Lisa ...

  6. High Blood Pressure

    Science.gov (United States)

    ... can help you control high blood pressure. These habits include: Healthy eating Being physically active Maintaining a healthy weight Limiting alcohol intake Managing and coping with stress To help make lifelong lifestyle changes, try making ...

  7. Normal pressure hydrocephalus

    Science.gov (United States)

    Hydrocephalus - occult; Hydrocephalus - idiopathic; Hydrocephalus - adult; Hydrocephalus - communicating; Dementia - hydrocephalus; NPH ... Ferri FF. Normal pressure hydrocephalus. In: Ferri FF, ed. ... Elsevier; 2016:chap 648. Rosenberg GA. Brain edema and disorders ...

  8. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... play_arrow How long is the typical healing time for a pressure sore? play_arrow Why do ... com is an informational and support website for families facing spinal cord injuries. The website does not ...

  9. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... hours? play_arrow What's the best way to do daily skin inspections? play_arrow What are the ... for someone with a spinal cord injury to do to prevent pressure sores? play_arrow Why is ...

  10. Hypertension (High Blood Pressure)

    Science.gov (United States)

    ... Add less salt to your food and avoid fast food and other foods that are high in salt. Know your blood pressure and have it ... a Health Problem Cholesterol Smart Snacking Yoga for Stress Relief ...

  11. Normal Pressure Hydrocephalus

    Science.gov (United States)

    ... improves the chance of a good recovery. Without treatment, symptoms may worsen and cause death. What research is being done? The NINDS conducts and supports research on neurological disorders, including normal pressure hydrocephalus. Research on disorders such ...

  12. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Living with SCI Personal Experiences by Topic Resources Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David ...

  13. Pressure Transducer Locations

    Data.gov (United States)

    National Aeronautics and Space Administration — Files are located here, defining the locations of the pressure transducers on the HIRENASD model. These locations also correspond to the locations that analysts...

  14. Pressurized Vessel Slurry Pumping

    International Nuclear Information System (INIS)

    Pound, C.R.

    2001-01-01

    This report summarizes testing of an alternate ''pressurized vessel slurry pumping'' apparatus. The principle is similar to rural domestic water systems and ''acid eggs'' used in chemical laboratories in that material is extruded by displacement with compressed air

  15. Pressurized water reactor systems

    International Nuclear Information System (INIS)

    Meyer, P.J.

    1975-01-01

    Design and mode of operation of the main PWR components are described: reactor core, pressure vessel and internals, cooling systems with pumps and steam generators, ancillary systems, and waste processing. (TK) [de

  16. Dust in the Diffuse Neutral Interstellar Medium

    Science.gov (United States)

    Sofia, Ulysses J.

    2008-05-01

    Studies of interstellar dust have always relied heavily upon Laboratory Astrophysics for interpretation. Laboratory values, in the broad sense that includes theory, are needed for the most basic act of measuring interstellar abundances, to the more complex determination of what grains are responsible for particular extinction. The symbiotic relationship between astronomical observations and Laboratory Astrophysics has prompted both fields to move forward, especially in the era of high-resolution ultraviolet spectroscopy when new elemental species could be interpreted and observations were able to show the limits of laboratory determinations. Thanks to this synergy, we currently have a good idea of the quantity of the most abundant elements incorporated into dust in diffuse neutral interstellar clouds: carbon, oxygen, iron, silicon and magnesium. Now the task is to figure out how, chemically and physically, those elements are integrated into interstellar grains. We can do this by comparing extinction curves to grain populations in radiative transfer models. The limitation at the present time is the availability of optical constants in the infrared through ultraviolet for species that are likely to exist in dust, i.e., those that are easy to form in the physical environments around stars and in molecular clouds. Extinction in some lines of sight can be fit within current abundance limits and with the optical constants that are available. However the inability to reproduce other extinction curves suggests that optical constants can be improved, either in quality for compounds that have been measured, or quantity in the sense of providing data for more materials. This talk will address the current state and the future of dust studies in the diffuse neutral interstellar medium. This work is supported by the grant HST-AR-10979.01-A from the Space Telescope Science Institute to Whitman College.

  17. Exploring the Interstellar Medium with SOFIA

    Science.gov (United States)

    Erickson, Edwin F.

    2004-01-01

    SOFIA, the Stratospheric Observatory for Infrared Astronomy, is being developed to operate at wavelengths from 0.3 microns to 1.6 mm over a 20 year lifetime. Its 2.5 m effective diameter telescope will be diffraction limited (approximately 8.5 arc seconds FWHM at 100 microns) at wavelengths beyond about 5 microns. Its B747SP aircraft platform will allow coverage of the entire sky and enable observation of ephemeral events. Nine first-generation focal plane instruments are being built, and more will be added later. These attributes assure SOFIA a vital role in future studies of the interstellar medium (ISM), in addition to topics such as the solar system. SOFIA observers will explore the gamut of ISM topics: star formation; the Galactic Center; debris disks; recycling of materials through the stellar life cycle; the origin and evolution of biogenic materials; shock, photodissociation, and photoexcitation physics; gas and grain chemistry. Imaging, spectroscopy, and eventually polarimetry covering much of the infrared spectrum will all be part of SOFIA's arsenal in the attack on these and other important problems. The talk will describe the observatory, its status, its science instruments and anticipated program. SOFIA is a joint program of NASA in the U.S. and DLR in Germany. Broad participation by the international science community in SOFIA observations will be encouraged via annual proposal opportunities and user-friendly tools. Roughly 80% of the observing time will be granted by the U.S. and 20% by Germany. For further information, see http://sofia.arc.nasa.gov.

  18. Hydrocarbons biodegradation in unsaturated porous medium

    International Nuclear Information System (INIS)

    Gautier, C.

    2007-12-01

    Biological processes are expected to play an important role in the degradation of petroleum hydrocarbons in contaminated soils. However, factors influencing the kinetics of biodegradation are still not well known, especially in the unsaturated zone. To address these biodegradation questions in the unsaturated zone an innovative experimental set up based on a physical column model was developed. This experimental set up appeared to be an excellent tool for elaboration of a structured porous medium, with well defined porous network and adjusted water/oil saturations. Homogeneous repartition of both liquid phases (i.e., aqueous and non aqueous) in the soil pores, which also contain air, was achieved using ceramic membranes placed at the bottom of the soil column. Reproducible interfaces (and connectivity) are developed between gas, and both non mobile water and NAPL phases, depending on the above-defined characteristics of the porous media and on the partial saturations of these three phases (NAPL, water and gas). A respirometric apparatus was coupled to the column. Such experimental set up have been validated with hexadecane in dilution in an HMN phase. This approach allowed detailed information concerning n-hexadecane biodegradation, in aerobic condition, through the profile of the oxygen consumption rate. We have taken benefit of this technique, varying experimental conditions, to determine the main parameters influencing the biodegradation kinetics and compositional evolution of hydrocarbons, under steady state unsaturated conditions and with respect to aerobic metabolism. Impacts of the nitrogen quantity and of three different grain sizes have been examined. Biodegradation of petroleum cut, as diesel cut and middle distillate without aromatic fraction, were, also studied. (author)

  19. Home monitoring of blood pressure

    OpenAIRE

    McGrath, Barry P

    2015-01-01

    Home blood pressure monitoring is the self-measurement of blood pressure by patients. In the diagnosis and management of high blood pressure it is complementary to 24-hour ambulatory blood pressure monitoring and clinic blood pressure measurements. Home monitoring can also help to identify white-coat and masked hypertension.

  20. High-pressure tritium

    International Nuclear Information System (INIS)

    Coffin, D.O.

    1976-01-01

    Some solutions to problems of compressing and containing tritium gas to 200 MPa at 700 0 K are discussed. The principal emphasis is on commercial compressors and high-pressure equipment that can be easily modified by the researcher for safe use with tritium. Experience with metal bellows and diaphragm compressors has been favorable. Selection of materials, fittings, and gauges for high-pressure tritium work is also reviewed briefly

  1. Pressure multiplying dispenser

    Science.gov (United States)

    DeFord, Henry S.; Moss, Owen R.

    1986-01-01

    A pressure multiplying dispenser for delivering fluid, preferably as a spray to the atmosphere, from a source of fluid, preferably a spray bottle, is described. The dispenser includes in combination a hollow cylindrical member, a nozzle delivery tube within the cylindrical member and a hollow actuator piston slideable within the cylindrical member which acts to multiply the pressure of a squeeze applied to the spray bottle.

  2. Chemically Defined Medium and Caenorhabditis elegans: A Powerful Approach

    Science.gov (United States)

    Szewczyk, N. J.; Kozak, E.; Conley, C. A.

    2003-01-01

    C. elegans has been established as a powerful genetic system. Growth in a chemically defined medium (C. elegans Maintenance Medium (CeMM)) now allows standardization and systematic manipulation of the nutrients that animals receive. Liquid cultivation allows automated culturing and experimentation and should be of me in large-scale growth and screening of animals. Here we present our initial results from developing culture systems with CeMM. We find that CeMM is versatile and culturing is simple. CeMM can be used in a solid or liquid state, it can be stored unused for at least a year, unattended actively growing cultures may be maintained longer than with standard techniques, and standard C. elegans protocols work well with animals grown in defined medium. We also find that there are caveats of using defined medium. Animals in defined medium grow more slowly than on standard medium, appear to display adaptation to the defined medium, and display altered growth rates as they change defined medium composition. As was suggested with the introduction of C. elegans as a potential genetic system, use of defined medium with C. elegans should prove a powerful tool.

  3. The Study of Birefringent Homogenous Medium with Geometric Phase

    International Nuclear Information System (INIS)

    Banerjee, Dipti

    2010-12-01

    The property of linear and circular birefringence at each point of the optical medium has been evaluated here from differential matrix N using the Jones calculus. This matrix lies on the OAM sphere for l = 1 orbital angular momentum. The geometric phase is developed by twisting the medium uniformly about the direction of propagation of the light ray. The circular birefringence of the medium, is visualized through the solid angle and the angular twist per unit thickness of the medium, k, that is equivalent to the topological charge of the optical element. (author)

  4. The influence of the interstellar medium on climate and life

    International Nuclear Information System (INIS)

    Talbot, R.J. Jr.

    1980-01-01

    Recent studies of the gas and dust between the stars, the interstellar medium, reveal a complex chemistry which indicates that prebiotic organic chemistry is ubiquitous. The relationship between this interstellar chemistry and the organic chemistry of the early solar system and the Earth is explored. The interstellar medium is also considered as likely to have a continuing influence upon the climate of the Earth and other planets. Life forms as known are not only descendants of the organic evolution begun in the interstellar medium, but their continuing evolution is also molded through occasional interactions between the interstellar medium, the Sun and the climate on Earth. (author)

  5. Medium component improvement for β-galactosidase production by ...

    African Journals Online (AJOL)

    Medium component improvement for β-galactosidase production by a probiotic strain Lactobacillus fermentum CM33. Wattana Sriphannam, Kridsada Unban, Hisashi Ashida, Kenji Yamamoto, Chartchai Khanongnuch ...

  6. Cultivation of tea fungus on malt extract medium

    Directory of Open Access Journals (Sweden)

    Cvetković Dragoljub D.

    2002-01-01

    Full Text Available The possibility of application of malt extract as a source of carbohydrate in a medium for tea fungus was investigated. The beverage obtained on such medium was compared with that prepared in a traditional way with sucrose medium. The presence of easily adoptable sugars, glucose and fructose, as dominant in malt medium results in a very effective fermentation, which gives much more sour beverage for the same time and makes it possible to reduce the fermentation period. The obtained beverage has satisfactory sensorial characteristics.

  7. Enclosed Small and Medium Caliber Firing Experimental Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility conducts completely instrumented terminal ballistics experimental tests with small and medium-caliber tungsten alloy penetrators against advanced armor...

  8. Pressure vessel, in particular reactor pressure vessel

    International Nuclear Information System (INIS)

    1976-01-01

    The task to design the pre-stressing facility for a pressure vessel, especially for nuclear reactors, wiht pre-stressed jacket and pre-stressing facility, the latter one showing circumferential steel tendons supported polygonally on the outer side of the jacket by means of supporting shoes, in such a way that simply defined tensions can be generated and re-tensioning of the tendons can be carried out easily is solved according to the invention by keeping the circumference of the steel tendons fixed and by designing the supporting shoes as stressing shoes. The defined tensions are applied through the stressing shoes. (ORU) [de

  9. High-pressure microfluidics

    Science.gov (United States)

    Hjort, K.

    2015-03-01

    When using appropriate materials and microfabrication techniques, with the small dimensions the mechanical stability of microstructured devices allows for processes at high pressures without loss in safety. The largest area of applications has been demonstrated in green chemistry and bioprocesses, where extraction, synthesis and analyses often excel at high densities and high temperatures. This is accessible through high pressures. Capillary chemistry has been used since long but, just like in low-pressure applications, there are several potential advantages in using microfluidic platforms, e.g., planar isothermal set-ups, large local variations in geometries, dense form factors, small dead volumes and precisely positioned microstructures for control of reactions, catalysis, mixing and separation. Other potential applications are in, e.g., microhydraulics, exploration, gas driven vehicles, and high-pressure science. From a review of the state-of-art and frontiers of high pressure microfluidics, the focus will be on different solutions demonstrated for microfluidic handling at high pressures and challenges that remain.

  10. Peristaltic Transport of a Jeffrey Fluid with Variable Viscosity through a Porous Medium in an Asymmetric Channel

    Directory of Open Access Journals (Sweden)

    A. Afsar Khan

    2012-01-01

    Full Text Available The peristaltic flow of a Jeffrey fluid with variable viscosity through a porous medium in an asymmetric channel is investigated. The channel asymmetric is produced by choosing the peristaltic wave train on the wall of different amplitude and phase. The governing nonlinear partial differential equations for the Jeffrey fluid model are derived in Cartesian coordinates system. Analytic solutions for stream function, velocity, pressure gradient, and pressure rise are first developed by regular perturbation method, and then the role of pertinent parameters is illustrated graphically.

  11. High-pressure and temperature investigations of energetic materials

    Science.gov (United States)

    Gump, J. C.

    2014-05-01

    Static high-pressure measurements are extremely useful for obtaining thermodynamic and phase stability information from a wide variety of materials. However, studying energetic materials can be challenging when extracting information from static high-pressure measurements. Energetic materials are traditionally C, H, N, O compounds with low crystalline symmetry, producing weak signal in commonly performed x-ray diffraction measurements. The small sample volume available in a static high-pressure cell exacerbates this issue. Additionally, typical hydrostatic compression media, such as methanol/ethanol, may react with many energetic materials. However, characterization of their thermodynamic parameters and phase stability is critical to understanding explosive performance and sensitivity. Crystalline properties, such as bulk modulus and thermal expansion, are necessary to accurately predict the behaviour of shocked solids using hydrodynamic codes. In order to obtain these values, equations of state of various energetic materials were investigated using synchrotron angle-dispersive x-ray diffraction experiments at static high-pressure and temperature. Intense synchrotron radiation overcomes the weak x-ray scattering of energetic materials in a pressure cell. The samples were hydrostatically compressed using a non-reactive hydrostatic medium and heated using a heated diamond anvil cell. Pressure - volume data for the materials were fit to the Birch-Murnaghan and Vinet formalisms to obtain bulk modulus and its first pressure derivative. Temperature - volume data at ambient pressure were fit to obtain the volume thermal expansion coefficient. Data from several energetic materials will be presented and compared.

  12. Taking Care of Pressure Sores

    Science.gov (United States)

    ... Tract Infections: Indwelling (Foley) Catheter Taking Care of Pressure Sores [Download this pamphlet: "Taking Care of Pressure ... may not show up right away. Stages of pressure sores and how to care for them: STAGE ...

  13. Non-Force-Free Magnetic Flux Ropes with Minimum Complexity in anAmbient Medium: A Parameter Study

    Science.gov (United States)

    2012-10-16

    nonzero (Chen 2012, henceforth referred to as Paper 1). The work is formulated using standard magnetohydrodynamics ( MHD ) and develops a new physical...embedded in a plasma medium of pressure pa. The method presented in Paper 1 self-consistently solves the basic one-dimensional (1D) MHD equation subject...channel of electric current and the magnetic field arising from this current. An analytic method has been developed to obtain one-dimensional equilibrium

  14. Heat transfer in a Couette flow with part of the space between the plates filled with porous medium

    International Nuclear Information System (INIS)

    Carrocci, L.R.; Liu, C.Y.; Ismail, K.A.R.

    1982-01-01

    The effect of various parameters in the temperature profile is shown under boundary conditions for the Couette flow between infinite plates with part of the space filled with porous medium. The parameters observed are: pressure gradient, permeability, the non-dimensional product PE (Prandtl number x Eckert number), the relation between the thermal conductibility coefficient between porous region and pure fluid, and finally the non-dimensional product PR (Prandtl number x Reynolds number). (E.G.) [pt

  15. Two prototypes for medium rotation forestry harvesting

    Directory of Open Access Journals (Sweden)

    L. Pari

    2013-09-01

    Full Text Available Five years old poplar (Populus spp. plantation represents an interesting model of productivity. The most attractive characteristics of this energy crop are the handling flexibility, the high yield of biomass per area unit and the good quality of the chips obtainable. The mechanical harvesting of five-years old poplar plantations requires the use of specialized forest machineries such as harvester, feller, forwarder and chipper. Usually, after felling, the working phases consist of extraction, stacking and chipping. Generally, the last one is carried out in a “static phase”, where the product is taken from staked logs by using a hydraulic arm having a gripper that feed the chipping machine. In order to introduce technological innovations for the medium rotation forestry harvesting, the Consiglio per la Ricerca e la sperimentazione in Agricoltura, Unità di ricerca per l’Ingegneria agraria (CRAING of Monterotondo (Rome, Italy has developed a five years poplar cutwindrower and a self-propelled chipper equipped with a pick up system. The prototype of cut-windrower is a semi-trailed machine powered by a 95 kW tractor (at least. It mounts a cutting system and a double pincer with variable positioning. During the cutting phase the plant is grasped by the double pincer which conveys and unloads the stem along the inter-row. The trees are placed parallel to the progress of the tractor, but oriented in the opposite direction. The biomass windrowed is then chipped in a dynamic phase directly from the inter row using the self-propelled chipper equipped with the pick-up head. In the first tests, the cut-windrower has reached an operative working capacity of 0.22 ha h-1, with an operative production of 44 t h-1. On the other hand, the self-propelled chipper has showed an operative working capacity equal to 0.18 ha h-1, and an operative production of 35 t h-1 about. Both machines have shown good quality of the work performed and the results obtained

  16. High hydrostatic pressure treatment of porcine oocytes induces parthenogenetic activation

    DEFF Research Database (Denmark)

    Lin, Lin; Pribenszky, Csaba; Molnár, Miklós

    2010-01-01

    An innovative technique called high hydrostatic pressure (HHP) treatment has recently been reported to improve the cryosurvival of gametes and embryos in certain mammalian species, including the mouse, pig, and cattle. In the present study the parthenogenetic activation (PA) of pig oocytes caused...... by HHP treatment was investigated in different holding media with or without Ca(2+). The efficiency of activation was tested at different pressure levels and media including T2 (HEPES-buffered TCM-199 containing 2% cattle serum), and mannitol-PVA fusion medium with (MPVA + Ca(2+)) or without Ca(2...

  17. Pressure Effect on Entrance Flow

    DEFF Research Database (Denmark)

    Christensen, Jens Horslund; Couch, Mark

    1997-01-01

    The paper reports on experimentally determined pressure drops associated with orifice and capillary dies, where the exit pressure is elevated. The effect of hydrostatic pressure up to 70 MPa is reported for PS, LDPE and PP melts.......The paper reports on experimentally determined pressure drops associated with orifice and capillary dies, where the exit pressure is elevated. The effect of hydrostatic pressure up to 70 MPa is reported for PS, LDPE and PP melts....

  18. Two-dimensional static deformation of an anisotropic medium

    Indian Academy of Sciences (India)

    The problem of two-dimensional static deformation of a monoclinic elastic medium has been studied using the eigenvalue method, following a Fourier transform. We have obtained expressions for displacements and stresses for the medium in the transformed domain. As an application of the above theory, the particular ...

  19. Development of a minimal growth medium for Lactobacillus plantarum

    NARCIS (Netherlands)

    Wegkamp, H.B.A.; Teusink, B.; Vos, de W.M.; Smid, E.J.

    2010-01-01

    Aim: A medium with minimal requirements for the growth of Lactobacillus plantarum WCFS was developed. The composition of the minimal medium was compared to a genome-scale metabolic model of L. plantarum. Methods and Results: By repetitive single omission experiments, two minimal media were

  20. Novel culture medium for the axenic growth of Balamuthia mandrillaris.

    Science.gov (United States)

    Lares-Jiménez, Luis Fernando; Gámez-Gutiérrez, Ricardo Alfredo; Lares-Villa, Fernando

    2015-08-01

    Until now, for axenic cultivation of Balamuthia mandrillaris, the BM-3 culture medium and the Modified Chang's special medium have been the only ones recommended, but they have some disadvantages, as both require many components and their preparations are laborious. Therefore, we developed a novel culture medium for B. mandrillaris axenic cultivation. Each one of the 11 components of BM-3 was combined with Cerva's medium as basal culture medium. Ten strains of B. mandrillaris including the reference strain CDC:V039 and 9 environmental isolates were used during trials. After testing all combinations, the basal medium complemented with 10× Hank's balanced salt solution was the only one that supported confluent growth of B. mandrillaris. Cell shape and motility of trophozoites were normal. This developed medium is as useful as BM-3 for axenization. The development of a cheaper and easy-to-prepare medium for B. mandrillaris opens the possibility of increasing its study. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Horizontal and vertical projectile motion in a resistant medium ...

    African Journals Online (AJOL)

    A study of projectile motion in a resistant medium subject to varying path angles and speed was carried out. Solutions to the governing equations of motion is developed employing double integration. Analysis of the results shows that the path of the particle in a resistant medium is affected by both increase in path angle and ...

  2. Optical activity via Kerr nonlinearity in a spinning chiral medium

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Anwar Ali, E-mail: anwarali@uom.edu.pk [Department of Physics, University of Malakand at Chakdara Dir(L) (Pakistan); Bacha, Bakht Amin, E-mail: aminoptics@gmail.com [Department of Physics, University of Malakand at Chakdara Dir(L) (Pakistan); Khan, Rahmat Ali, E-mail: rahmat_alipk@yahoo.com [Department of Mathematics, University of Malakand (Pakistan)

    2016-11-11

    Optical activity is investigated in a chiral medium by employing the four level cascade atomic model, in which the optical responses of the atomic medium are studied with Kerr nonlinearity. Light entering into a chiral medium splits into circular birefringent beams. The angle of divergence between the circular birefringent beams and the polarization states of the two light beams is manipulated with Kerr nonlinearity. In the stationary chiral medium the angle of divergence between the circular birefringent beams is calculated to be 1.3 radian. Furthermore, circular birefringence is optically controlled in a spinning chiral medium, where the maximum rotary photon drag angle for left (right) circularly polarized beam is ±1.1 (±1.5) microradian. The change in the angle of divergence between circular birefringent beams by rotary photon drag is calculated to be 0.4 microradian. The numerical results may help to understand image designing, image coding, discovery of photonic crystals and optical sensing technology. - Highlights: • Coherent control of a circular birefringence in a chiral medium is studied. • Angle of divergence between birefringent beams is modified with Kerr nonlinearity. • Rotary photon drag is controlled for birefringent beams and enhanced with Kerr nonlinearity in a spinning medium. • Rotation of the angle of divergence is observed with mechanical rotation of the medium about an axis and modified with Kerr effect. • A change in the angle of divergence is calculated by about a microradian with rotary photon drag.

  3. Palm kernel agar: An alternative culture medium for rapid detection ...

    African Journals Online (AJOL)

    The feasibility of using palm kernel agar (PKA) as an alternative culture medium to desiccated coconut agar (DCA), the conventional medium for the recovery of aflatoxigenic fungi from mixed cultures and the detection of aflatoxigenic fungi and direct visual determination of aflatoxins in agricultural commodities was ...

  4. Wave velocities in a pre-stressed anisotropic elastic medium

    Indian Academy of Sciences (India)

    Wave velocities in a pre-stressed anisotropic elastic medium. M D Sharma ... Modified Christoffel equations are derived for three-dimensional wave propagation in a general anisotropic medium under initial stress.The three roots of a ... Department of Mathematics, Kurukshetra University, Kurukshetra 136 119, India. UIET ...

  5. An improvised medium for axenic cultivation of Acanthamoeba spp.

    OpenAIRE

    Kirti Megha; Amit Gupta; Rakesh Sehgal; Sumeeta Khurana

    2017-01-01

    Acanthamoebae can be easily grown in bacterised cultures, but their growth in axenic media is tedious and many times unsuccessful. We thus experimented with some additives in the conventional axenic medium for growth of various isolates of Acanthamoeba. Addition of Torula yeast RNA was found to significantly enhance the growth of Acanthamoebae in the axenic culture medium.

  6. Medium response to jets in heavy ion collisions

    Science.gov (United States)

    Tachibana, Yasuki

    2018-01-01

    A short overview on recent progress in studies of medium response to jet quenching in heavy ion collisions is presented. We show the typical features of medium response and give comment on their connection to jet observables by introducing the work done by the author and collaborators as an example.

  7. Can small, medium and micro enterprises contribute to tourism ...

    African Journals Online (AJOL)

    However, tourism in Butha-Buthe is under-developed, and it is very important to identify tourism's potential in this area, and explore how small, medium and micro enterprises (SMMEs) could contribute to the development of the industry. The study examines the economic role of small, medium and micro enterprises towards ...

  8. Radiation sensitive medium for recording an absorbed dose distribution

    DEFF Research Database (Denmark)

    2017-01-01

    The invention relates to a radiation sensitive medium for recording an absorbed dose distribution from an external radiation source such as e.g. a linear particle accelerator used for e.g. cancer treatment or radiation processing. The invention further relates to a method for measuring the absorbed...... doses distribution in a radiation sensitive medium....

  9. Gender Variance and the Performance of Small and Medium Scale ...

    African Journals Online (AJOL)

    Small and medium scale industries usually tend to develop and grow into medium and large scale industries. This form of growth yields to the development of the economy. However, thesuccess of SMEs depends on the effort of the entrepreneurs through concerted effort of financing and effective managerial skills.

  10. Medium-term carbohydrate tolerance improves and then ...

    African Journals Online (AJOL)

    Background: It has been reported that carbohydrate metabolism does not deteriorate in pregnancy in the African, an observation at variance with general teaching. Objective: To determine the effect of pregnancy on medium term carbohydrate metabolism. Methods: Medium term carbohydrate metabolism was evaluated in ...

  11. English medium of instruction: A situation analysis | Uys | South ...

    African Journals Online (AJOL)

    The majority of learners in southern Africa receive their education through the medium of a second language, English. Although teachers of English play a crucial role in helping learners to acquire language skills in the medium of instruction, we argue that subject content teachers' lack of attention to the teaching of the four ...

  12. Diamonds are not forever : Botswana medium-term fiscal sustainability

    OpenAIRE

    Kojo, Naoko C.

    2010-01-01

    This paper analyzes Botswana's medium-term fiscal sustainability in view of the expected depletion of diamonds in the future. The analysis shows that in the absence of policy adjustments, Botswana's current fiscal policy strategy is unsustainable over the longer term, which could endanger macroeconomic stability and Botswana's reputation as Africa's success story. Ensuring medium-term sust...

  13. Coupling of Elastic Isotropic Medium Parameters in Iterative Linearized Inversion

    NARCIS (Netherlands)

    Anikiev, D.V.; Kashtan, B.M.; Mulder, W.A.; Troyan, V.N.

    2014-01-01

    An elastic isotropic medium is described with three parameters. In seismic migration the perturbation of one elastic parameter affects the images of all the three, which means that these parameters are coupled. For an effective quantitative reconstruction of the true elastic medium reflectivity one

  14. Tap Water Hydraulic Systems for Medium Power Applications

    DEFF Research Database (Denmark)

    Conrad, Finn; Adelstorp, Anders

    1998-01-01

    Presentation of new range of developed tap water hydraulic componets and applications for medium power up to 4 kW and 50 bar.......Presentation of new range of developed tap water hydraulic componets and applications for medium power up to 4 kW and 50 bar....

  15. The ribose and glycine Maillard reaction in the interstellar medium ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 120; Issue 3. The ribose and glycine Maillard reaction in the interstellar medium (ISM): A theoretical study. Abraham F Jalbout Md Abul Haider ... Keywords. Density functional computational study; ribose; glycine; Maillard reaction; gaseous phase interstellar medium.

  16. Wave velocities in a pre-stressed anisotropic elastic medium

    Indian Academy of Sciences (India)

    Modified Christoffel equations are derived for three-dimensional wave propagation in a general anisotropic medium under initial stress.The three roots of a cubic equation define the phase velocities of three quasi-waves in the medium.Analytical expressions are used to calculate the directional derivatives of phase ...

  17. An improvised medium for axenic cultivation ofAcanthamoebaspp.

    Science.gov (United States)

    Megha, Kirti; Gupta, Amit; Sehgal, Rakesh; Khurana, Sumeeta

    2017-01-01

    Acanthamoebae can be easily grown in bacterised cultures, but their growth in axenic media is tedious and many times unsuccessful. We thus experimented with some additives in the conventional axenic medium for growth of various isolates of Acanthamoeba. Addition of Torula yeast RNA was found to significantly enhance the growth of Acanthamoebae in the axenic culture medium.

  18. Optimization of growth medium and fermentation conditions for ...

    African Journals Online (AJOL)

    A sequential optimization approach based on statistical experimental designs was employed to optimize growth medium and fermentation conditions, in order to improve the antibiotic activity of Xenorhabdus nematophila TB. Tryptone soyptone broth (TSB) was chosen as the original medium for optimization. Glucose and ...

  19. An improvised medium for axenic cultivation of Acanthamoeba spp.

    Directory of Open Access Journals (Sweden)

    Kirti Megha

    2017-01-01

    Full Text Available Acanthamoebae can be easily grown in bacterised cultures, but their growth in axenic media is tedious and many times unsuccessful. We thus experimented with some additives in the conventional axenic medium for growth of various isolates of Acanthamoeba. Addition of Torula yeast RNA was found to significantly enhance the growth of Acanthamoebae in the axenic culture medium.

  20. Increasing the formability of ferritic stainless steel tube by granular medium-based hot forming

    Science.gov (United States)

    Chen, H.; Staupendahl, D.; Hiegemann, L.; Tekkaya, A. E.

    2017-09-01

    Ferritic stainless steel without the alloy constituent nickel is an economical substitution for austenitic stainless steel in the automotive industry. Its lower formability, however, oftentimes prevents the direct material substitution in forming processes such as hydroforming, necessitating new forming strategies. To extend the forming capacity of ferritic stainless steel tube, the approach of forming at elevated temperatures is proposed. Utilizing granular material as forming medium, high forming temperatures up to 900°C are realized. The forming process works by moving punches axially into the granular medium, thereby, compressing it and causing axial as well as radial pressure. In experimental and numerical investigations it is shown that interfacial friction between the granular medium and the tube inherently causes tube feed, resulting in stain states in the tension-compression region of the FLD. Formability data for this region are gained by notched tensile tests, which are performed at room temperature as well as at elevated temperatures. The measured data show that the formability is improved at forming temperatures higher than 700°C. This observed formability increase is experimentally validated using a demonstrator geometry, which reaches expansion ratios that show fracture in specimens formed at room temperature.

  1. Butanol and hexanol production in Clostridium carboxidivorans syngas fermentation: Medium development and culture techniques.

    Science.gov (United States)

    Phillips, John R; Atiyeh, Hasan K; Tanner, Ralph S; Torres, Juan R; Saxena, Jyotisna; Wilkins, Mark R; Huhnke, Raymond L

    2015-08-01

    Clostridium carboxidivorans was grown on model syngas (CO:H2:CO2 [70:20:10]) in a defined nutrient medium with concentrations of nitrogen, phosphate and trace metals formulated to enhance production of higher alcohols. C. carboxidivorans was successfully grown in a limited defined medium (no yeast extract, no MES buffer and minimal complex chemical inputs) using an improved fermentation protocol. Low partial pressure of CO in the headspace, coupled with restricted mass transfer for CO and H2, was required for successful fermentation. In the absence of substrate inhibition (particularly from CO), growth limitation increased production of alcohols, especially butanol and hexanol. Concentrations of butanol (over 1.0g/L), hexanol (up to 1.0g/L) and ethanol (over 3.0g/L) were achieved in bottle fermentations. Minimal medium and controlled supply of CO and H2 should be used in characterizing candidate butanol and hexanol producing strains to select for commercial potential. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. [CHARACTERISTIC FEATURES OF PRESSURE ULCER INFECTION].

    Science.gov (United States)

    Kučišec-Tepeš, N

    2016-01-01

    Pressure ulcer is a localized injury of the skin and/or adjacent tissue, usually above bone protrusions. It is a result of pressure or pressure combined with shear stress, friction and humidity. With regard to long life and delayed healing, it is a chronic wound. Pressure ulcer appears as a consequence of a combination of micro-embolism, ischemia and myonecrosis. These pathophysiological processes provide an ideal medium for proliferation of microorganisms, predominantly bacteria, and development of infection. Progression in the development of pressure ulcer is a dynamic process manifesting in phases, each of which is characterized by its own physiological-anatomical peculiarities and microbiological status. An open lesion without protective barrier becomes contaminated immediately, and, shortly afterwards, colonized by physiological microflora of the host and microbes from the environment. In the absence of preventive measures, the wound becomes critically colonized and infected. The characteristic of chronic wound/pressure ulcer is that it is colonized, and the infection develops depending on various factors in 5% to 80% of cases. The ability of microbes to cause infection depends on a number of factors, which include the pathogen and the host. The number and quantity of virulent factors, microbes, determines the virulence coefficient, which is responsible for overcoming the host’s immune system and development of infection. In the development of pressure ulcer infection, two essential microbial factors predominate, i.e. the presence of adhesin and association with biofilm. Thus, pressure ulcer infection as a chronic wound is characterized by a polymicrobial and heterogeneous population of microbes, domination of biofilm phenotype as a primary factor of virulence present in 90% of cases, phenotype hypervariability of species, and resistance or tolerance of the etiological agents to all types of biocides. The most significant virulence factor is biofilm. It is a

  3. The flow of an aqueous foam through a two-dimensional porous medium

    Science.gov (United States)

    Dollet, B.; Jones, S. A.; Géraud, B.; Meheust, Y.; Cox, S. J.; Cantat, I.

    2013-12-01

    Flowing foams are used in many engineering and technical applications. A well-known application is oil recovery. Another one is the remediation of polluted soils: the foam is injected into the ground in order to mobilize chemical species present in the medium. Apart from potential interesting physico-chemical and biochemical properties, foams have peculiar flow properties that applications might benefit of. In particular, viscous dissipation arises mostly from the contact zones between the soap films and the walls, which results in peculiar friction laws allowing the foam to invade narrow pores more efficiently than Newtonian fluids would. We investigate the flow of a two-dimensional foam in three geometrical configurations. The flow velocity field and pressure field can both be reconstructed from the kinematics of the foam bubbles. We first consider a medium consisting of two parallel channels with different widths, at fixed medium porosity, that is, at fixed total combined width of the two channels. The flow behavior is highly dependent on the foam structure within the narrowest of the two channels [1]; consequently, the flux ratio between the two channels exhibits a non-monotonic dependence on the ratio of their widths. We then consider two parallel channels that are respectively convergent and divergent. The resulting flow kinematics imposes asymmetric bubble deformations in the two channels; these deformations strongly impact the foam/wall friction, and consequently the flux distribution between the two channels, causing flow irreversibility. We quantitatively predict the flux ratio as a function of the channel widths by modeling pressure drops of both viscous and capillary origins. This study reveals the crucial importance of boundary-induced bubble deformation on the mobility of a flowing foam. We then study how film-wall friction, capillary pressures and bubble deformation impact the flow of a foam in a two-dimensional porous medium consisting of randomly

  4. Effect of medium treated with neutral oxygen radicals on growth of Saccharomyces cerevisiae

    Science.gov (United States)

    Kobayashi, Jun; Hashizume, Hiroshi; Ohta, Takayuki; Hori, Masaru; Ito, Masafumi

    2015-09-01

    Recently, nonequilibrium atmospheric-pressure plasmas are expected to be applied in medical and agricultural fields. We have studied the growth effect of budding yeast cells in phosphate buffered saline (PBS(-)) using an atmospheric-pressure oxygen-radical source. From a practical application perspective, we have investigated the effect of medium treated with oxygen radicals on the growth of budding yeast in the study. The cells were suspended with yeast extract peptone dextrose (YPD) medium or PBS. The suspensions were treated with neutral oxygen radicals. Oxygen radicals were generated at an O2/(O2 + Ar) gas flow ratio of 0.6%, a total flow rate of 5 slm, and an exposure distance of 10 mm. To estimate the inactivation and the growth of yeast cells, cells were counted with the colony count method using a counting chamber and a microscope. In the case of budding yeast suspended in PBS, the growth changed from promotion to inactivation with increasing the oxygen radical treatment time. But in the case of budding yeast suspended in YPD, it didn't exhibit promotion and inactivation of the growth with oxygen radical treatment. The results indicated that some substances of YPD scavenged the growth effect of oxygen radicals. This work was partly supported by JSPS KAKENHI Grant Number 26286072 and project for promoting Research Center in Meijo University.

  5. The role of medium range order on phase transitions in chain silicates upon compression

    International Nuclear Information System (INIS)

    Serghiou, G; Chopelas, A; Boehler, R

    2004-01-01

    Raman spectroscopic measurements of the tetrahedrally coordinated crystal MnSiO 3 (rhodonite) in an argon pressure medium show that it becomes amorphous above 33 GPa. This observation consolidates our findings and explanation for the global structural trends exhibited by the extended chain silicate family AA'BO 3 (AA': Mg, Ca, Mn, Fe; B: Si) upon compression. In particular, crystals of this family are made of two types of building blocks coined P and C. Those crystals comprised solely of P blocks transform to dense higher coordinated crystalline phases; those comprised of P and C blocks, such as MnSiO 3 rhodonite, become amorphous; whereas those comprised solely of C blocks show both crystalline and amorphous regions upon compression. The reason that this medium range order length scale (building block scale) classification is correlated with the type of transitions taking place upon compression is due to the instability of C blocks and C-P interfaces with respect to P blocks and P-P interfaces at high pressures

  6. The effect of the external medium on the gravitropic curvature of rice (Oryza sativa, Poaceae) roots

    Science.gov (United States)

    Staves, M. P.; Wayne, R.; Leopold, A. C.

    1997-01-01

    The roots of rice seedlings, growing in artificial pond water, exhibit robust gravitropic curvature when placed perpendicular to the vector of gravity. To determine whether the statolith theory (in which intracellular sedimenting particles are responsible for gravity sensing) or the gravitational pressure theory (in which the entire protoplast acts as the gravity sensor) best accounts for gravity sensing in rice roots, we changed the physical properties of the external medium with impermeant solutes and examined the effect on gravitropism. As the density of the external medium is increased, the rate of gravitropic curvature decreases. The decrease in the rate of gravicurvature cannot be attributed to an inhibition of growth, since rice roots grown in 100 Osm/m3 (0.248 MPa) solutions of different densities all support the same root growth rate but inhibit gravicurvature increasingly with increasing density. By contrast, the sedimentation rate of amyloplasts in the columella cells is unaffected by the external density. These results are consistent with the gravitational pressure theory of gravity sensing, but cannot be explained by the statolith theory.

  7. Propagation of monochromatic light in a hot and dense medium

    Science.gov (United States)

    Masood, Samina S.

    2017-12-01

    Photons, as quanta of electromagnetic fields, determine the electromagnetic properties of an extremely hot and dense medium. Considering the properties of the photons in the interacting medium of charged particles, we explicitly calculate the electromagnetic properties such as the electric permittivity, magnetic permeability, refractive index and the propagation speed of electromagnetic signals in an extremely hot and dense background. Photons acquire a dynamically generated mass in such a medium. The screening mass of the photon, the Debye shielding length and the plasma frequency are calculated as functions of the statistical parameters of the medium. We study the properties of the propagating particles in astrophysical systems of distinct statistical conditions. The modifications in the properties of the medium lead to the equation of state of the system. We mainly calculate all these parameters for extremely high temperatures of the early universe.

  8. Propagation of monochromatic light in a hot and dense medium

    Energy Technology Data Exchange (ETDEWEB)

    Masood, Samina S. [University of Houston Clear Lake, Department of Physical and Applied Sciences, Houston, TX (United States)

    2017-12-15

    Photons, as quanta of electromagnetic fields, determine the electromagnetic properties of an extremely hot and dense medium. Considering the properties of the photons in the interacting medium of charged particles, we explicitly calculate the electromagnetic properties such as the electric permittivity, magnetic permeability, refractive index and the propagation speed of electromagnetic signals in an extremely hot and dense background. Photons acquire a dynamically generated mass in such a medium. The screening mass of the photon, the Debye shielding length and the plasma frequency are calculated as functions of the statistical parameters of the medium. We study the properties of the propagating particles in astrophysical systems of distinct statistical conditions. The modifications in the properties of the medium lead to the equation of state of the system. We mainly calculate all these parameters for extremely high temperatures of the early universe. (orig.)

  9. Small and medium business in the contractual relationship system

    Directory of Open Access Journals (Sweden)

    Obalyaeva Julia, I.

    2015-01-01

    Full Text Available The paper reveals the role of small and medium business in the national economy. The comparative analysis of the indicators characterizing the development of small business in Russia, South Korea and France is given are compared. Two laws that support small and medium businesses in public purchasing. The author’s vision of the problems of development of small and medium-sized businesses in the Russian Federation and specification of the path of the national economy development is presented. Two schemes, revealing the organization of interaction of large corporate sector and the sector of small and medium-sized enterprises in the system of contractual relations and analysis of internal and external factors in the development of small and medium-sized enterprises are presented. The experience of conducting digital auctions with participation of small businesses on an digital platform CJSC "Sberbank AST" is considered.

  10. Isogeometric frictionless contact analysis with the third medium method

    Science.gov (United States)

    Kruse, R.; Nguyen-Thanh, N.; Wriggers, P.; De Lorenzis, L.

    2018-01-01

    This paper presents an isogeometric formulation for frictionless contact between deformable bodies, based on the recently proposed concept of the third medium. This concept relies on continuum formulations not only for the contacting bodies but also for a fictitious intermediate medium in which the bodies can move and interact. Key to the formulation is a suitable definition of the constitutive behavior of the third medium. In this work, based on a number of numerical tests, the role of the material parameters of the third medium is systematically assessed. We also assess the rate of spatial convergence for higher-order discretizations, stemming from the regularization of the non-smooth contact problem inherent to the third medium approach. Finally, problems with self contact are considered and turn out to be an attractive application of the method.

  11. System and method for treatment of a medium

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Surinder Prabhjot; Acharya, Harish Radhakrishna; Perry, Robert James; McDermott, John Brian

    2017-05-23

    A system and method for treatment of a medium is disclosed. The system includes a plurality of separator zones and a plurality of heat transfer zones. Each of the separator zone and the heat transfer zone among the plurality of separator zones and heat transfer zones respectively, are disposed alternatively in a flow duct. Further, each separator zone includes an injector device for injecting a sorbent into the corresponding separator zone. Within the corresponding separator zone, the injected sorbent is reacted with a gaseous medium flowing in the flow duct, so as to generate a reacted gaseous medium and a reacted sorbent. Further, each heat transfer zone exchanges heat between the reacted gaseous medium fed from the corresponding separator zone and a heat transfer medium.

  12. Bacterial growth on Mueller Hinton medium sterilized by. gamma. -radiation

    Energy Technology Data Exchange (ETDEWEB)

    Eisenberg, E. (Israel Atomic Energy Commission, Yavne. Soreq Nuclear Research Center); Bogokowsky, B.; Altmann, G. (Sheba Medical Center, Tel Hashomer (Israel); Tel Aviv Univ. (Israel). Medical School)

    1981-12-01

    The possibility of radiosterilization of culture media for the cultivation of bacteria was investigated. Mueller Hinton agar, a medium widely used for the propagation of some fastidious pathogenic bacteria, was sterilized with 1.0 and 1.5 Mrad doses of ..gamma..-radiation. Bacteria belonging to seven different species grew as well on the radiosterilized medium as on medium sterilized by heat in a conventional way. Reduction in colony size was observed on the radiosterilized medium with Staphylococcus aureus and Shigella boydii. Neisseria meningitidis, the most fastidious bacterium tested, did not grow at all. The addition of small amounts of catalase corrected the deleterious radiation effect and all bacteria tested could be successfully grown on irradiated Mueller Hinton agar supplemented with up to 11 Keil units catalase per liter medium.

  13. van der Waals interactions in a magnetodielectric medium

    International Nuclear Information System (INIS)

    Spagnolo, S.; Dalvit, D. A. R.; Milonni, P. W.

    2007-01-01

    The van der Waals interaction between two ground-state atoms is calculated for two electrically or magnetically polarizable particles embedded in a dispersive magnetodielectric medium. Unlike previous calculations which infer the atom-atom interaction from the dilute-medium limit of the macroscopic, many-body van der Waals interaction, the interaction is calculated directly for the system of two atoms in a magnetodielectric medium. Two approaches are presented, the first based on the quantized electromagnetic field in a dispersive medium without absorption and the second on Green functions that allow for absorption. We show that the correct van der Waals interactions are obtained regardless of whether absorption in the host medium is explicitly taken into account

  14. Critical cerebral perfusion pressure at high intracranial pressure measured by induced cerebrovascular and intracranial pressure reactivity.

    Science.gov (United States)

    Bragin, Denis E; Statom, Gloria L; Yonas, Howard; Dai, Xingping; Nemoto, Edwin M

    2014-12-01

    The lower limit of cerebral blood flow autoregulation is the critical cerebral perfusion pressure at which cerebral blood flow begins to fall. It is important that cerebral perfusion pressure be maintained above this level to ensure adequate cerebral blood flow, especially in patients with high intracranial pressure. However, the critical cerebral perfusion pressure of 50 mm Hg, obtained by decreasing mean arterial pressure, differs from the value of 30 mm Hg, obtained by increasing intracranial pressure, which we previously showed was due to microvascular shunt flow maintenance of a falsely high cerebral blood flow. The present study shows that the critical cerebral perfusion pressure, measured by increasing intracranial pressure to decrease cerebral perfusion pressure, is inaccurate but accurately determined by dopamine-induced dynamic intracranial pressure reactivity and cerebrovascular reactivity. Cerebral perfusion pressure was decreased either by increasing intracranial pressure or decreasing mean arterial pressure and the critical cerebral perfusion pressure by both methods compared. Cortical Doppler flux, intracranial pressure, and mean arterial pressure were monitored throughout the study. At each cerebral perfusion pressure, we measured microvascular RBC flow velocity, blood-brain barrier integrity (transcapillary dye extravasation), and tissue oxygenation (reduced nicotinamide adenine dinucleotide) in the cerebral cortex of rats using in vivo two-photon laser scanning microscopy. University laboratory. Male Sprague-Dawley rats. At each cerebral perfusion pressure, dopamine-induced arterial pressure transients (~10 mm Hg, ~45 s duration) were used to measure induced intracranial pressure reactivity (Δ intracranial pressure/Δ mean arterial pressure) and induced cerebrovascular reactivity (Δ cerebral blood flow/Δ mean arterial pressure). At a normal cerebral perfusion pressure of 70 mm Hg, 10 mm Hg mean arterial pressure pulses had no effect on

  15. Detecting solar chameleons through radiation pressure

    Energy Technology Data Exchange (ETDEWEB)

    Baum, S., E-mail: sebastian.baum@cern.ch [Uppsala Universitet, Box 516, SE 75120, Uppsala (Sweden); European Organization for Nuclear Research (CERN), Gèneve (Switzerland); Cantatore, G. [Università di Trieste, Via Valerio 2, 34127 Trieste (Italy); INFN Trieste, Padriciano 99, 34149 Trieste (Italy); Hoffmann, D.H.H. [Institut für Kernphysik, TU-Darmstadt, Schlossgartenstr. 9, D-64289 Darmstadt (Germany); Karuza, M. [INFN Trieste, Padriciano 99, 34149 Trieste (Italy); Phys. Dept. and CMNST, University of Rijeka, R. Matejcic 2, Rijeka (Croatia); Semertzidis, Y.K. [Center for Axion and Precision Physics Research (IBS), Daejeon 305-701 (Korea, Republic of); Department of Physics, KAIST, Daejeon 305-701 (Korea, Republic of); Upadhye, A. [Physics Department, University of Wisconsin–Madison, 1150 University Avenue, Madison, WI 53706 (United States); Zioutas, K., E-mail: konstantin.zioutas@cern.ch [European Organization for Nuclear Research (CERN), Gèneve (Switzerland); University of Patras, GR 26504 Patras (Greece)

    2014-12-12

    Light scalar fields can drive the accelerated expansion of the universe. Hence, they are obvious dark energy candidates. To make such models compatible with tests of General Relativity in the solar system and “fifth force” searches on Earth, one needs to screen them. One possibility is the so-called “chameleon” mechanism, which renders an effective mass depending on the local matter density. If chameleon particles exist, they can be produced in the sun and detected on Earth exploiting the equivalent of a radiation pressure. Since their effective mass scales with the local matter density, chameleons can be reflected by a dense medium if their effective mass becomes greater than their total energy. Thus, under appropriate conditions, a flux of solar chameleons may be sensed by detecting the total instantaneous momentum transferred to a suitable opto-mechanical force/pressure sensor. We calculate the solar chameleon spectrum and the reach in the chameleon parameter space of an experiment using the preliminary results from a force/pressure sensor, currently under development at INFN Trieste, to be mounted in the focal plane of one of the X-Ray telescopes of the CAST experiment at CERN. We show, that such an experiment signifies a pioneering effort probing uncharted chameleon parameter space.

  16. Detecting solar chameleons through radiation pressure

    International Nuclear Information System (INIS)

    Baum, S.; Cantatore, G.; Hoffmann, D.H.H.; Karuza, M.; Semertzidis, Y.K.; Upadhye, A.; Zioutas, K.

    2014-01-01

    Light scalar fields can drive the accelerated expansion of the universe. Hence, they are obvious dark energy candidates. To make such models compatible with tests of General Relativity in the solar system and “fifth force” searches on Earth, one needs to screen them. One possibility is the so-called “chameleon” mechanism, which renders an effective mass depending on the local matter density. If chameleon particles exist, they can be produced in the sun and detected on Earth exploiting the equivalent of a radiation pressure. Since their effective mass scales with the local matter density, chameleons can be reflected by a dense medium if their effective mass becomes greater than their total energy. Thus, under appropriate conditions, a flux of solar chameleons may be sensed by detecting the total instantaneous momentum transferred to a suitable opto-mechanical force/pressure sensor. We calculate the solar chameleon spectrum and the reach in the chameleon parameter space of an experiment using the preliminary results from a force/pressure sensor, currently under development at INFN Trieste, to be mounted in the focal plane of one of the X-Ray telescopes of the CAST experiment at CERN. We show, that such an experiment signifies a pioneering effort probing uncharted chameleon parameter space

  17. Effect of high hydrostatic pressure on four genotypes of F-specific RNA bacteriophages.

    Science.gov (United States)

    Guan, D; Joerger, R D; Kniel, K E; Calci, K R; Hicks, D T; Pivarnik, L F; Hoover, D G

    2007-01-01

    The pressure responses of four genotypes of F-specific RNA bacteriophages, f2, GA, Qbeta and SP, were evaluated with respect to pressure magnitude, treatment temperature and suspending medium. The pressure responses were studied with respect to pressure magnitude (350 to 600 MPa), treatment temperature (-10 to 50 degrees C) and suspending media. Phages f2 and GA had much higher pressure resistances than Qbeta and SP. Pressure resistances of Qbeta and SP were enhanced with increase in salt concentrations in the range of 350 to 600 MPa from -10 to 50 degrees C in PBS. Qbeta and SP had greater pressure resistances when suspended in phosphate-buffered saline (PBS) with added glucose (5%, w/w), UHT whole milk and Dulbecco's Modified Eagle's Medium plus 10% fetal bovine sera than they did in PBS. Two surfactants, sucrose laurate and monolaurin, and one chelating agent, ethylenediamine tetraacetic acid (EDTA), increased the pressure resistance of Qbeta and SP, but had modest effect on either f2 or GA. Four representative F-specific RNA bacteriophages, f2 (serotype I), GA (serotype II), Qbeta (serotype III) and SP (serotype IV) showed different resistances to hydrostatic pressure in the range of 350-600 MPa. This study screened for practical surrogates of HAV for validation of commercial high hydrostatic pressure processing.

  18. Reactor pressure tank

    International Nuclear Information System (INIS)

    Dorner, H.; Scholz, M.; Jungmann, A.

    1975-01-01

    In a reactor pressure tank for a nuclear reactor, self-locking hooks engage a steel ring disposed over the removable cover of the steel vessel. The hooks exert force upon the cover to maintain the cover in a closed position during operation of the reactor pressure tank. The force upon the removal cover is partly the result of the increasing temperature and thermal expansion of the steel vessel during operation. The steel vessel is surrounded by a reinforced-concrete tank. (U.S.)

  19. Reactor pressure vessel materials

    International Nuclear Information System (INIS)

    Suzuki, K.

    1998-01-01

    As a result of the popularity of the Agencies report 'Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels' of 1975, it was decided that another report on this broad subject would be of use. In this report, background and contemporary views on specially identified areas of the subject are considered as self-contained chapters, written by experts. Chapter 3 offers a detailed treatment of the selection criteria and properties of reactor pressure vessel materials. The main attention is directed towards steel and ingot making and the subsequent material processing

  20. Intracranial Pressure Monitoring

    DEFF Research Database (Denmark)

    Raboel, P H; Bartek, J; Andresen, M

    2012-01-01

    Monitoring of intracranial pressure (ICP) has been used for decades in the fields of neurosurgery and neurology. There are multiple techniques: invasive as well as noninvasive. This paper aims to provide an overview of the advantages and disadvantages of the most common and well-known methods...... standard in terms of accurate measurement of pressure, although microtransducers generally are just as accurate. Both invasive techniques are associated with a minor risk of complications such as hemorrhage and infection. Furthermore, zero drift is a problem with selected microtransducers. The non...