WorldWideScience

Sample records for medicine equipment ventajas

  1. Advantages of a program of quality control in the nuclear medicine equipment; Ventajas de un programa de control de calidad en los equipos de medicina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo Z, F.E.; Argumosa, E. [Departamento de Medicina Nuclear del Instituto Nacional de Cancerologia, Tlalpan, Mexico D.F. (Mexico); Herrera R, M.R. [Hospital Infantil de Mexico ' Federico Gomez' , Mexico D.F. (Mexico)

    2007-07-01

    In Nuclear Medicine more 90% of the entirety of the carried out procedures its are with diagnostic ends where it is acquired one or several images. This makes indispensable to have an appropriate operation of the dedicated equipment to produce images and also of those non former images, as the activity caliper, to assure an appropriate quality diagnoses not from the images and the correct dose administration to the patient. In this work the main calibrations that should be carried out and an example of the program of quality control of a gamma camera mark Siemens and model E.CAM are presented. Considerations that should take as for the radiological protection are exposed. Comments on the parameters that correct the required calibrations and the images taken place by an operation or inadequate calibrations are included. In conclusion, the necessity of a program that it contains as minimum the quality control of the gamma cameras and of the activity caliper, having as main advantages a good image quality diagnoses and to minimize the dose imparted the patient are exposed. (Author)

  2. Equipment used in nuclear medicine

    International Nuclear Information System (INIS)

    Das, B.K.; Noreen Norfaraheen Lee Abdullah

    2012-01-01

    Detection of radiation is the common purpose of all equipment's and instruments used in radioisotope laboratories. The first and most important instrument that was used in nuclear medicine was Geiger tube developed by H.W. Geiger as early in 1908. He in association with Mueller developed the so called Geiger-Muller tube (GM tube) which could be used to detect beta and gamma radiations. In spite of its severe limitations, GM tube remained the only external counting device until 1949. In 1948, Kallman reported that the scintillations can be detected and amplified with the help of photomultiplier tubes (PMTs). In comparison with gas filled detectors, scintillation detectors have two principal advantages that augment their use in nuclear medicine. Firstly, they are capable of much higher counting rates because of fast resolving times and secondly, because they are much more efficient for gamma ray detection. The scintillation detector is the most basic block of any modern radioisotope detection instrument like rate meter, counter, scanner, gamma camera or single photon emission computed tomography. (author)

  3. Medicina basada en la evidencia (MBE: Ventajas

    Directory of Open Access Journals (Sweden)

    L.M. Junquera

    2003-10-01

    Full Text Available La Medicina basada en la Evidencia (MBE se define como un proceso cuyo objetivo es la selección de los mejores argumentos científicos para la resolución de los problemas que la práctica médica cotidiana plantea. Filosóficamente es un nuevo paradigma (verificacionista, que se ha extendido a todas las profesiones sanitarias (Cirugía Basada en la Evidencia, Odontología Basada en la Evidencia, etc., soportado por los avances tecnológicos. Aunque sus ventajas son evidentes, también se han reconocido limitaciones, especialmente en lo concerniente a la práctica quirúrgica. En el presente trabajo se revisan los fundamentos y principales ventajas de la MBE.Evidence Based Medicine (EBM is defined as a process whose objective is the selection of the best scientific arguments for the resolution of problems in the medical practice. Phylosophically, it is a new paradigm that has been extended to all the sanitary professions (Evidence Based Surgery, Evidence Based Dentistry, etc., sustained by the technological advances. Although their advantages are evident, also there have been recognized limitations, specially concerning the surgical practice. At the present work the bases and the main advantages of the EBM are checked.

  4. Specification and acceptance testing of nuclear medicine equipment

    International Nuclear Information System (INIS)

    Wegst, A.V.; Erickson, J.J.

    1984-01-01

    The purchase of nuclear medicine equipment is of prime importance in the operation of a clinical service. Failure to properly evaluate the potential uses of the instrumentation and the various operational characteristics of the equipment can often result in the purchase of inappropriate or inferior instruments. The magnitude of the purchase in terms of time and financial investments make it imperative that the purchase be approached in a systematic manner. Consideration of both the intended clinical functions and personnel requirements is important. It is necessary also to evaluate the ability of the equipment vendor to support the instrumentation after the purchase has been completed and the equipment installed in the clinical site. The desired specifications of the instrument characteristics should be stated in terms that can be verified by acceptance testing. The complexity of modern instrumentation and the sensitivity of it to the environment require the buyer to take into account the potential problems of controlling the temperature, humidity, and electrical power of the installation site. If properly and systematically approached, the purchase of new nuclear medicine instrumentation can result in the acquisition of a powerful diagnostic tool which will have a useful lifetime of many years. If not so approached, it may result in the expenditure of a large amount of money and personnel time without the concomitant return in useful clinical service. (author)

  5. Ventajas del uso de la inyección electrónica para vehículos diesel pesados en las condiciones de Cuba. // Advantages of electronic injection for diesel engines in heavy duty equipment.

    Directory of Open Access Journals (Sweden)

    J. Luis Reyes González

    2002-09-01

    Full Text Available Tomando en cuenta la importancia que tiene para Cuba el obtener una eficiencia energética elevada en los motores decombustión interna, al igual que el control de las emanaciones de gases tóxicos en los mismos, se realizó este trabajo dondese demuestran las ventajas tanto en el orden económico como ecológico de los motores diesel con mando electrónico paraequipos pesados empleados en la transportación de carga por camiones en la empresa Cubalse.Por medio de métodos experimentales y estadísticos, se obtuvo el consumo de combustible y la humosidad en motores coninyección electrónica (Detroit y en motores que utilizan los métodos tradicionales (Cummins. Los rresultadosdemostraron la superioridad en ambos aspectos de los motores con inyección electrónica.Se realizó una valoración del tiempo de amortización de la inversión inicial necesaria para utilizar en el parque existenteesta novedosa técnica de la inyección electrónica.Palabras claves: Eficiencia energética, inyección electrónica, consumo de combustible, motores de combustióninterna.__________________________________________________________________Abstract.Taking into consideration the importance of achieving a high efficiency in the internal combustion engines and emissioncontrol of the exhaust gases, this paper deals with economical and environmental advantages of the electronic controlleddiesel engines in heavy-duty trucks, which are used by Cubalse in the transportation. The fuel consumption and the sootemission in Detroit motors (with electronic injection system and Cummins (with traditional system, were studied usingstatistic and experimental methods, and the Detroit proved to be superior in both parameters. The pay back time for theinvestment needed to change the systems of all the existent trucks were calculatedKey words: Energetic efficiency, electronic injection, fuel consumption, internal combustion engine.

  6. La Resiliencia Empresarial como ventaja competitiva

    OpenAIRE

    Sanchis Gisbert, Raquel; Poler Escoto, Raúl

    2014-01-01

    Las empresas están cada vez más expuestas a amenazas, imprevistos y situaciones disruptivas que provocan alteraciones en su rendimiento empresarial. Las empresas precisan ser resilientes para dar una respuesta rápida y hacer frente ante dichas disrupciones. La resiliencia empresarial es una capacidad clave para hacer frente de manera sostenible y eficiente a las disrupciones, de forma que sea fuente de ventaja competitiva frente a aquellas empresas menos resilientes. Para ello,...

  7. Current situation of the facilities, equipments and human resources in nuclear medicine in Argentina

    International Nuclear Information System (INIS)

    Chiliutti, Claudia A.

    2008-01-01

    The current situation of nuclear medicine in Argentina, taking into account the facilities, their equipment and human resources available is presented in this paper. A review and analysis of the equipment, including technical characteristics and a survey of the professionals and technicians of the area, was carried out. In Argentina, there are 266 centers of nuclear medicine distributed all over the country. The operating licenses are granted by the Nuclear Regulatory Authority (Autoridad Regulatoria Nuclear - ARN). Forty four percent of the installed equipment are SPECT of 1 or 2 heads and 39,4 % are gamma camera. Besides, there are eleven PET operating in Argentina. There are 416 nuclear medicine physicians with individual permit for diagnostic purposes and 50% of them has also individual permit for treatment purposes. With the purpose of analyzing the regional distribution of the available resources in nuclear medicine, the country was divided into 7 geographical regions: City of Buenos Aires, Province of Buenos Aires, Pampa, Cuyo, Northeast, Northwest and Patagonia. From the analysis of the gathered information it is possible to conclude that the nuclear medicine equipment as well as the personnel present an irregular distribution, with a major concentration in the City of Buenos Aires and Province of Buenos Aires. The Northeast region presents the lowest number of Nuclear Medicine centers and the Patagonia region has the lowest number of medicine nuclear physicians with individual permits. The number of SPECT and gamma cameras is 7,3 per million of inhabitants. The information about the available resources in nuclear medicine presented in this paper and its comparison with the international information available provide elements for a better planning of the future activities in the area not only for the operators but also from the regulatory point of view. (author)

  8. Survey on quality control measurements for nuclear medicine imaging equipment in Finland in 2006

    International Nuclear Information System (INIS)

    Korpela, Helinae; Niemelae, Jarkko

    2008-01-01

    Routine quality control (QC) is an essential requirement in nuclear medicine (NM) in order to ensure optimal functioning of equipment. To harmonise the routine QC of NM imaging equipment in Finnish hospital s (planar gamma cameras, SPECT, coincidence gamma cameras, PET), the Radiation and Nuclear Safety Authority (STUK) will publish guidelines on QC in collaboration with several hospital physicists. Recommendations will be provided on routine QC measurements and on the frequency of testing. It is also planned to provide recommendations for the acceptance criteria when assessing different performance parameters for NM imaging equipment. In order to determine what performance parameters of NM equipment are currently measured in hospitals, how frequently they are measured and what acceptance criteria are used, a survey was carried out on the QC of NM equipment in Finland during 2006. (author)

  9. Innovar en operaciones, fuente de ventaja competitiva

    OpenAIRE

    Philip G. Moscoso

    2006-01-01

    Innovar en operaciones -no simplemente su mejora continua- significa idear formas completamente nuevas de operar. Esta ha sido una de las claves de muchos de los grandes éxitos que el mundo empresarial ha escrito, como por ejemplo, los casos de Dell, Toyota o Zara. La innovación operativa es una fuente de ventaja competitiva relativamente fiable, de poco riesgo, y sobre todo de máxima actualidad, porque cada vez más la partida contra nuestros competidores transcurre en el ta...

  10. Difficult airway equipment in departments of emergency medicine in Ireland: results of a national survey.

    LENUS (Irish Health Repository)

    Walsh, K

    2012-02-03

    BACKGROUND AND OBJECTIVE: Adverse effects associated with difficult airway management can be catastrophic and include death, brain injury and myocardial injury. Closed-malpractice claims have shown prolonged and persistent attempts at endotracheal intubation to be the most common situation leading to disastrous respiratory events. To date, there has been no evaluation of the types of difficult airway equipment currently available in Irish departments of emergency medicine. The objective of this survey was to identify the difficult airway equipment available in Irish departments of emergency medicine. METHODS: Departments of emergency medicine in the Republic of Ireland with at least one dedicated Emergency Medicine consultant were surveyed via telephone. RESULTS: All of the departments contacted held at least one alternative device on site for both ventilation and intubation. The most common alternative ventilation device was the laryngeal mask airway (89%). The most common alternative intubating device was the surgical airway device (100%). CONCLUSIONS: Irish departments of emergency medicine compare well with those in the UK and USA, when surveyed concerning difficult airway equipment. However, we believe that this situation could be further improved by training inexperienced healthcare providers in the use of the laryngeal mask airway and intubating laryngeal mask airway, by placing greater emphasis on the ready availability of capnography and by the increased use of portable difficult airway storage units.

  11. The maintenance of nuclear medicine equipments: the stakes in the liberal sector

    International Nuclear Information System (INIS)

    Fauchet, M.; Chambon, T.; Tellier, P.

    1994-01-01

    Maintenance of nuclear medicine installations is an obligation in the private sector (preventive maintenance to be sure of the detectors quality and of the associated software and hardware, corrective maintenance to be sure of the results quality and of the installations profitability). They must be negotiated at the time of the installations choice and added to the total cost of the equipment. Gamma cameras are chosen for illustrating these maintenance problems. (A.B.). 5 refs., 7 figs

  12. Quality control test solutions for diagnostic radiology, nuclear medicine and health physics with PTW equipment

    International Nuclear Information System (INIS)

    Froescher, Olga

    2007-01-01

    Complete test of publication follows. In 1922 PTW-Freiburg was founded to produce and market a revolutionary new electromechanical component for measuring very small electrical charges. Today PTW is the specialist and one of the global market leaders for manufacturing and supplying high-quality products in diagnostic radiology, nuclear medicine, radiation therapy and health physics. The quality control of X-ray images is influenced by a number of parameters. To maintain a consistent performance of X-ray installations, quality checks have to be conducted regularly. PTW offers a variety of diagnostic test tools for different X-ray devices, and therefore to reduce patient exposure and costs for X-ray departments. PTW's 'Code of Practice' defines in an easy and compact way how to perform quality control measurements on different diagnostic X-ray installations. The necessary equipment for measuring main parameters as well as acceptable limits are mentioned accordingly. The 'Code of Practice' bases on actual standards.

  13. Video-Based Learning vs Traditional Lecture for Instructing Emergency Medicine Residents in Disaster Medicine Principles of Mass Triage, Decontamination, and Personal Protective Equipment.

    Science.gov (United States)

    Curtis, Henry A; Trang, Karen; Chason, Kevin W; Biddinger, Paul D

    2018-02-01

    Introduction Great demands have been placed on disaster medicine educators. There is a need to develop innovative methods to educate Emergency Physicians in the ever-expanding body of disaster medicine knowledge. The authors sought to demonstrate that video-based learning (VBL) could be a promising alternative to traditional learning methods for teaching disaster medicine core competencies. Hypothesis/Problem The objective was to compare VBL to traditional lecture (TL) for instructing Emergency Medicine residents in the American College of Emergency Physicians (ACEP; Irving, Texas USA) disaster medicine core competencies of patient triage and decontamination. A randomized, controlled pilot study compared two methods of instruction for mass triage, decontamination, and personal protective equipment (PPE). Emergency Medicine resident learning was measured with a knowledge quiz, a Likert scale measuring comfort, and a practical exercise. An independent samples t-test compared the scoring of the VBL with the TL group. Twenty-six residents were randomized to VBL (n=13) or TL (n=13). Knowledge score improvement following video (14.9%) versus lecture (14.1%) did not differ significantly between the groups (P=.74). Comfort score improvement also did not differ (P=.64) between video (18.3%) and lecture groups (15.8%). In the practical skills assessment, the VBL group outperformed the TL group overall (70.4% vs 55.5%; Plearning vs traditional lecture for instructing emergency medicine residents in disaster medicine principles of mass triage, decontamination, and personal protective equipment. Prehosp Disaster Med. 2018;33(1):7-12.

  14. Implementation of a quality control program of the equipment of the nuclear medicine services in Chile

    International Nuclear Information System (INIS)

    Astudillo, R.; Diaz, G.; Ferreira, A.; Garcia, M.; Hermosilla, A.; Pacheco, F.; Vasquez, M.; Coca, M.

    2014-08-01

    Now days in Chile there are more of 43 Nuclear Medicine centers; most of them have gamma cameras in order to study physiological process in diagnostic and treatment of patients pathologies. This requires having the equipment in optimal operating condition and it is ensured with quality control programs that are based on a series of tests relating to protocols, such as TECDOC-602 y AAPM No.6. Planar test often applied in gamma cameras including: spatial resolution, spatial linearity, sensitivity and uniformity. SPECT tests consider: tomography uniformity, rotation center tomography resolution and total performance. The tests in dose calibrator are: background measurement, accuracy, precision, linearity and reproducibility. The tests above require the use of radioactive sources and specific simulators patterns or phantom based on international standards such as The National Electrical Manufacturers Association (Nema), International Atomic Energy Agency (IAEA) and The American Association of Medical Physics (AAPM). In this work we carried out several tests of quality control in a Nuclear Medicine Center of Temuco and we propose to implement the applied methodology in others similar Chilean centers. (author)

  15. INNOVACIÓN: FACTOR CLAVE PARA LOGRAR VENTAJAS COMPETITIVAS

    Directory of Open Access Journals (Sweden)

    Luis Mathison

    2007-07-01

    Full Text Available El presente artículo ha sido elaborado con la finalidad de mostrar a la innovación como un factor organizacional que permite el logro de ventajas competitivas. Para ello han sido consultados diversas referencias teóricas que permitieron definir el concepto de ventajas competitivas, de innovación, el proceso innovador, su influencia sobre la cadena de valor de la organización y la gestión de la innovación, para llegar así, de manera sistemática, a una propuesta sobre los principales aspectos a considerar en el proceso de innovación como factor importante en el logro de ventajas competitivas.

  16. INNOVACIÓN: FACTOR CLAVE PARA LOGRAR VENTAJAS COMPETITIVAS

    OpenAIRE

    Luis Mathison; José Gándara; Carlos Primera; Luis García

    2007-01-01

    El presente artículo ha sido elaborado con la finalidad de mostrar a la innovación como un factor organizacional que permite el logro de ventajas competitivas. Para ello han sido consultados diversas referencias teóricas que permitieron definir el concepto de ventajas competitivas, de innovación, el proceso innovador, su influencia sobre la cadena de valor de la organización y la gestión de la innovación, para llegar así, de manera sistemática, a una propuesta sobre los principales aspectos a...

  17. State-of-the-art of the installations, equipments and human resources of nuclear medicine in Argentina

    International Nuclear Information System (INIS)

    Chiliutti, Claudia A.

    2004-01-01

    The current situation of nuclear medicine in Argentina, taking into account the facilities, their equipment and human resources available is presented in this paper. A review and analysis of the equipment, including technical characteristics and a survey of the professionals and technicians of the area, was carried out . In Argentina, there are 292 centers of nuclear medicine distributed all over the country. The operating licenses are granted by the Nuclear Regulatory Authority. Forty percent of the installed equipment are SPECT of 1 or 2 heads and 40 % are gamma camera. Besides, there are two PET operating in Argentina. There are 402 nuclear medicine physicians with individual permit for diagnostic purposes and 50% of them has also individual permit for treatment purposes. With the purpose of analyzing the regional distribution of the available resources in nuclear medicine, the country was divided into 7 geographical regions: City of Buenos Aires, Province of Buenos Aires, Pampeana, Cuyo, Northeast, Northwest and Patagonia. From the analysis of the gathered information it is possible to conclude that the nuclear medicine equipment as well as the personnel presents an irregular distribution, with a major concentration in the City of Buenos Aires and Province of Buenos Aires. The Northeast region presents the lowest number of Nuclear Medicine centers and the Patagonia region has the lowest number of nuclear medicine physicians with individual permits. The number of SPECT and gamma cameras is 8,65 per million of inhabitants. The information about the available resources in nuclear medicine presented in this paper and its comparison with the international available information provide elements for a better planning of the future activities in the area not only for the operators but also from the regulatory point of view. (author)

  18. Evaluation of the Nuclear Medicine facilities in Minas Gerais state: quality control program of equipment

    International Nuclear Information System (INIS)

    Kubo, Tadeu Takao Almodovar; Biancardi, Rodrigo; Rocha, Adriana Marcia Guimaraes; Ferreira, Denia Romao; Silva, Franciele Aquiles Anjos; Assuncao, Jonathan Buenos Aires; Alves, Ederson Henrique; Almeida, Ana Flavia Batista; Alves, Nathalia Fernandes; Xavier, Faber Henrique Zacarias; Gontijo, Rodrigo Modesto Gadelha; Mamede, Marcelo; Universidade Federal de Minas Gerais

    2017-01-01

    With the reformulation of the CNEN-NN-3.05 standard in December 2013, Brazil's Nuclear Medicine (NMS) services have to perform a greater number of quality controls for SPECT and PET equipment. However, little is known about the reality of the quality control programs of these services regarding the application of the new standard. Thus, in this context, the objective of the present study was to evaluate the quality control program of MNSs in the state of Minas Gerais. All NMSs in the state of Minas Gerais were invited to participate in the project. Of these, 34.48% (20 facilities) agreed to participate in the project, 50.00% (29 facilities) did not respond to the invitation and 15.52%(9 facilities) declined their participation. Thus, as of November 2015, 20 SPECT and 2 PET/CT equipment were evaluated for the performance of the quality control tests recommended by the new CNEN standard. The phantoms required for the evaluation came from the Laboratory of Dosimetry and Quality Control of UFMG. Even with the deadlines set by CNEN for the implementation of the quality control program in the NMSs, more than 50% of the evaluated services did not implement the quality controls, and the absence of specific phantoms is the main reason for the failure. Among the problems found in the installations, the most critical were: collimators with no conditions of use in the clinical routine, linearity problems of the evaluated image and values of image uniformity superior to the limits of acceptance. Problems in the uniformity and linearity of the image found directly impacted the performance of other tests, such as spatial resolution, SPECT performance, among others. In a general way, the NMSs in the state of Minas Gerais evaluated with the present study are in clinical feasible conditions. (author)

  19. Country-wide quality control of equipment in Norwegian laboratories performing in vivo nuclear medicine examinations

    International Nuclear Information System (INIS)

    Skretting, A.; Rootwelt, K.; Berthelsen, T.

    1984-01-01

    The report presents the methods used and the results obtained in quality control tests performd in all Norwegian hospital laboratories performing in vivo nuclear medicine examinations. The tests included activity meters and scintillation cameras. The activity meters were tested by means of calibrated, long-lived radioactive sources. The quality of these instruments were judged to be satisfactory for moderate and high activities, non of them showing a deviation of more than 10% from the calibration value. Deviations were larger at low activities and were for some laboratories unacceptable. The scintillation cameras test included studies of flood field (homogeneity), geometrical resolution and energy resolution, as well as measurements of count rate characteristics and sensitivity. 40% of the cameras were judged to have flood field responses with satisfactory homogeneity, whereas 32% of the cameras had a satisfactory resolution ability. A liver/abdomen phantom test was carried out by the staff of the actual laboratory. This test proved that only 20% of the laboratories had a satisfactory total performance, managing to detect and describe satisfactorily 4 out of 5 simulated defects in the liver phantom. Lack of information density and insufficient number of projections was the main reason for unsatisfactory results with good cameras. It is recommended that quality control equipment as used in the described tests should be made available to Norwegian hospitals for self assessment. Regular quality assurance tests as recommended by the Norwegian Association for Radiation Physics and Norwegian Society of Nuclear Medicine should be implemented in all hospitals. Moreover, a practical training course in quality assurance should be arranged. (RF)

  20. Las TIC como fuente de ventaja competitiva en las PYMES

    Directory of Open Access Journals (Sweden)

    Álvaro Fernando Moncada Niño

    2013-06-01

    Full Text Available Desde su aparición, las Tecnologías de la Información y las Comunicaciones (TIC se han convertido en un recurso fundamental de las empresas para competir en la mayoría de las industrias, generalizando el planteamiento de que son fuente de ventaja competitiva. Pero realmente, ¿cuándo las TIC son fuente potencial de ventaja competitiva para las pymes? ¿Bajo qué condiciones se logra que contribuyan a generar valor y mejorar su posición competitiva? ¿Qué características deben cumplir para alcanzar y sustentar la Ventaja Competitiva? Este documento basado en la Teoría de los Recursos y Capacidades (TRC responde estas preguntas y presenta al análisis de recurso Valioso, Raro, Inimitable y Organización (VRIO como herramienta para la determinación del potencial y valor que las TIC pueden alcanzar en las pymes y cómo pueden contribuir a que la empresa alcance ventajas competitivas sostenibles, en complemento de sus recursos y capacidades organizacionales.

  1. Las TIC como fuente de ventaja competitiva en las PYMES

    Directory of Open Access Journals (Sweden)

    Álvaro Fernando Moncada Niño

    2013-07-01

    Full Text Available Desde su aparición, las Tecnologías de la Información y las Comunicaciones (TIC se han convertido en un recurso fundamental de las empresas para competir en la mayoría de las industrias, generalizando el planteamiento de que son fuente de ventaja competitiva. Pero realmente, ¿cuándo las TIC son fuente potencial de ventaja competitiva para las pymes? ¿Bajo qué condiciones se logra que contribuyan a generar valor y mejorar su posición competitiva? ¿Qué características deben cumplir para alcanzar y sustentar la Ventaja Competitiva? Este documento basado en la Teoría de los Recursos y Capacidades (TRC responde estas preguntas y presenta al análisis de recurso Valioso, Raro, Inimitable y Organización (VRIO como herramienta para la determinación del potencial y valor que las TIC pueden alcanzar en las pymes y cómo pueden contribuir a que la empresa alcance ventajas competitivas sostenibles, en complemento de sus recursos y capacidades organizacionales.

  2. Advantages of a program of quality control in the nuclear medicine equipment

    International Nuclear Information System (INIS)

    Trujillo Z, F.E.; Argumosa, E.; Herrera R, M.R.

    2007-01-01

    In Nuclear Medicine more 90% of the entirety of the carried out procedures its are with diagnostic ends where it is acquired one or several images. This makes indispensable to have an appropriate operation of the dedicated equipment to produce images and also of those non former images, as the activity caliper, to assure an appropriate quality diagnoses not from the images and the correct dose administration to the patient. In this work the main calibrations that should be carried out and an example of the program of quality control of a gamma camera mark Siemens and model E.CAM are presented. Considerations that should take as for the radiological protection are exposed. Comments on the parameters that correct the required calibrations and the images taken place by an operation or inadequate calibrations are included. In conclusion, the necessity of a program that it contains as minimum the quality control of the gamma cameras and of the activity caliper, having as main advantages a good image quality diagnoses and to minimize the dose imparted the patient are exposed. (Author)

  3. Las directrices del costo como fuentes de ventajas competitivas.

    Directory of Open Access Journals (Sweden)

    José Reinel Bermeo Muñoz

    2005-01-01

    Full Text Available Este trabajo pretende describir con el mayor detalle y actualización posible el comportamiento de los costos dentro de una actividad de valor con base en los diez factores estructurales que influyen en el costo, denominados por Michael E. Porter (1985, como guías o directrices del costo en su libro La Ventaja Competitiva. Estas directrices actúan como fuentes directas para establecer y sostener el posicionamiento estratégico asumido por la empresa, para determinar la posición relativa de costos y para explicar, en gran parte, la generación temporal de valor en las diversas actividades desarrolladas a lo largo de la cadena de valor. Por esto constituyen uno de los fundamentos para explicar las diferencias de resultados entre empresas pertenecientes al mismo sector de actividad económica y fuentes de ventajas competitivas sostenibles.

  4. Quality control for the equipment of Nuclear medicine: experience of the H.U. de la Princesa

    International Nuclear Information System (INIS)

    Espana, M.L.; Gracia, A.; Prieto, C.; Lopez F, P.

    1998-01-01

    The quality control of the equipment used in a nuclear medicine service is a fundamental aspect in the Quality Assurance Program that in the present time is starting in our hospital. the objective of this work is to present the internal protocol used, its problematic associated with its starting, and the results obtained in the quality control as of the gamma camera as of the activimeter. In addition to the equipment own to the nuclear medicine service it has been used a Cs-137 source and puppets for several purposes. The results obtained demonstrated the stability of the controlled parameters which has led us to a restating of the established periodicities in our internal protocol, over all for some constancy tests. (Author)

  5. Paralympic sports medicine--current evidence in winter sport: considerations in the development of equipment standards for paralympic athletes.

    Science.gov (United States)

    Burkett, Brendan

    2012-01-01

    To highlight and discuss the considerations for the future development of equipment standards for Winter Paralympic sports. Literature searches were performed (in English) during May 2011 using the key words "technology, winter sport, Olympic, and Paralympic" in the computerized databases PubMed, PsycINFO, Science Direct, and Google Scholar. In addition, personal scientific observations were made at several Winter Paralympic Games. The retrieved articles were screened and assessed for relevance to the biological, biomechanical, and sport medicine aspects of equipment. There are 3 key areas in which technology has influenced sports performance in Paralympic winter sports, namely, specialized prostheses, crutch skis or outriggers (in lieu of poles), and sport-specific wheelchairs (such as the sit-ski). From a sport medicine perspective, a crucial factor not considered in the standard laboratory test of mechanical efficiency is the influence of the human-equipment connection, such as the stump-to-prosthesis interface or the required human-to-wheelchair control. This connectivity is critical to the effective operation of the assistive device. When assessing the efficiency of this equipment, the not-so-obvious, holistic, compensatory factors need to be considered. Assistive equipment is fundamental for a person with a disability to participate and compete in winter sport activities. Although there have been improvements in the mechanical function of some assistive devices, the key issue is matching the residual function of the person with the assistive equipment. Equitable access to this technology will also ensure that the fundamental spirit of fair play that underpins the Paralympic Games is maintained.

  6. La reputación como ventaja competitiva sostenible

    OpenAIRE

    González, Susana G

    2013-01-01

    En los actuales contextos globalizados, las empresas se encuentran en una búsqueda incesante por diferenciarse. La oferta de bienes y servicios en general ha crecido, tanto en cantidad como en calidad. A tal grado se produce este fenómeno que, si la empresa no encuentra una buena razón (y la comunica correctamente) para ser elegida por los consumidores, se condena a perder mercado y/o rentabilidad. Las tradicionales fuentes de ventaja competitiva se encuentran sobreexplotadas. Además de prese...

  7. Ventaja de jugar en casa en voleibol de alto rendimiento

    Directory of Open Access Journals (Sweden)

    Rui Marcelino

    2009-01-01

    Full Text Available En este estudio se ha pretendido estudiar la ventaja en casa en el Voleibol de alto rendimiento, apoyándonos en las estadísticas de los partidos que más pueden explicar ese fenómeno. Se han analizado 65.949 acciones de juego seleccionadas de la Liga Mundial 2005. El instrumento de observación que se ha elaborado es una combinación de formato de campo con sistemas de categorías. Los datos se han obtenido mediante el "Volleyball Information System" y se han analizado mediante la prueba t de Student, y la prueba ji-cuadrado. Los resultados demuestran que hay ventaja en casa en Voleibol (57,5% de victorias jugando en casa. Las estadísticas del ataque (t= 2.49, p = 0.01, del servicio (t= -2.18, p= 0.03, de la recepción (t= 16.74, p<0.001 y de la distribución (t= 2.03, p= 0.04 muestran rendimientos superiores para los equipos que juegan en casa. No se han encontrado diferencias en el rendimiento del bloqueo (t= -0.25, p= 0.80 y la defensa (t= 0.11, p= 0.92 entre los juegos disputados en casa y los disputados fuera.

  8. Data processing equipment of a Nuclear Medicine Department in 1980 - Introductory Report

    International Nuclear Information System (INIS)

    Itti, R.; Liehn, J.C.; Valeyre, J.

    1979-01-01

    A brief history enables the place taken by computers in nuclear medicine to be situated. Three stages are involved: at first, the quantitative functional studies developed (radioisotopic uptake curves) then the morphological studies with the research into increasingly efficient pictures systems and the introduction of data processing to improve the quality of the pictures and, finally, the digital analysis of the pictures leading to the build-up of regional physiological studies. The part played by computer systems in a Nuclear Medicine Department is summarized. The main advantages are emphasized and present possibilities are indicated. The components which make it possible to design a future acquisition and data processing system that may be used not only for routine practice examinations but also for axial scanning studies by emission are presented. The application of hyper-specialized systems using microprocessors is also under consideration [fr

  9. Automatic data-processing equipment of moon mark of nail for verifying some experiential theory of Traditional Chinese Medicine.

    Science.gov (United States)

    Niu, Renjie; Fu, Chenyu; Xu, Zhiyong; Huang, Jianyuan

    2016-04-29

    Doctors who practice Traditional Chinese Medicine (TCM) diagnose using four methods - inspection, auscultation and olfaction, interrogation, and pulse feeling/palpation. The shape and shape changes of the moon marks on the nails are an important indication when judging the patient's health. There are a series of classical and experimental theories about moon marks in TCM, which does not have support from statistical data. To verify some experiential theories on moon mark in TCM by automatic data-processing equipment. This paper proposes the equipment that utilizes image processing technology to collect moon mark data of different target groups conveniently and quickly, building a database that combines this information with that gathered from the health and mental status questionnaire in each test. This equipment has a simple design, a low cost, and an optimized algorithm. The practice has been proven to quickly complete automatic acquisition and preservation of key data about moon marks. In the future, some conclusions will likely be obtained from these data; some changes of moon marks related to a special pathological change will be established with statistical methods.

  10. La Ecoetiqueta en las pymes como una ventaja competitiva

    Directory of Open Access Journals (Sweden)

    Humberto Palos Delgadillo

    2016-02-01

    Full Text Available la globalización por la que transitan las empresas las ha colocado en un ámbito de competencia donde es necesario conocer cómo y en qué sentido influyen los productos que lanzan al mercado y la incidencia ambiental que representan por los envases que generan. en este sentido, el presente trabajo aborda la problemática ambiental que representa este tipo de residuos poco atendidos en muchos países, y México no es la excepción, por lo que esta investigación está referida al uso de la etiqueta ecológica y su significación en cuanto a ser una ventaja competitiva en las pequeñas y medianas empresas. al respecto, se seleccionó una empresa fabricante de pinturas ubicada en la Zona Metropolitana de Guadalajara, la cual es precisamente generadora de residuos de envases, para que, mediante el estudio de caso, se pueda conocer el aspecto fenomenológico y proponerse el uso del eco etiquetado en los productos que se lanzan al mercado, para convertir esta problemática en un área de oportunidad cuya estrategia medioambiental garantice la atención a este problema y sea sinónimo de armonía con el medio ambiente.

  11. Ventajas comparativas en el comercio agroalimentario, México y Estados unidos 2007-2011

    OpenAIRE

    Carlos Ricardo Menéndez Gámiz; Víctor H. Palacio Muñoz

    2013-01-01

    En este artículo se realiza una revisión del estado actual de las ventajas comparativas de México y Estados Unidos en el mercado agroalimentario mundial. Se recurre a las ventajas comparativas, como una herramienta de la teoría económica, aplicada en el análisis de los diez capítulos agropecuarios y catorce agroalimentarios del Sistema armonizado del comercio internacional (HS) por sus siglas en inglés, para el período 2007 a 2011. Se encontró que en México hay 8 capítulos con Ventaja compara...

  12. Medicines

    Science.gov (United States)

    Medicines can treat diseases and improve your health. If you are like most people, you need to take medicine at some point in your life. You may need to take medicine every day, or you may only need to ...

  13. TU-G-213-03: IEC Subcommittee 62C (Equipment for Radiotherapy, Nuclear Medicine and Radiation Dosimetry): Recent and Active Projects

    Energy Technology Data Exchange (ETDEWEB)

    Culberson, W. [University of Wisconsin - Madison (United States)

    2015-06-15

    The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetric safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.

  14. Ventaja Competitiva: Gestión en el nivel de empresa

    Directory of Open Access Journals (Sweden)

    María Cristina Pacheco Ornelas

    2016-02-01

    Full Text Available La ventaja competitiva de la empresa se basa en la adecuación de sus recursos y capacidades al ambiente de competencia. En el documento se presenta el marco y los fundamentos de la ventaja competitiva en el nivel de empresa, especificando las estrategias que conducen al desarrollo de la ventaja competitiva básica, revelada y sustentable, según el enfoque tridimensional dentro de la competencia global. Se especifican los atributos que deben desarrollar las empresas para el mejoramiento de sus capacidades, como los aspectos que constituyen la planificación estratégica en la actividad de la empresa y el entorno con que se relaciona, pues la competitividad de la empresa depende de su capacidad para configurar una cartera de recursos únicos, que le confieran un conjunto de competencias distintivas.

  15. La logística integral como ventaja competitiva y sistema logístico

    Directory of Open Access Journals (Sweden)

    Mario Anselmo Martínez gallardo

    2013-07-01

    Full Text Available Esta investigación analiza la logística integral como una ventaja competitiva y el sistema logístico. Es opinión de los autores que la logística integral es esencial para el intercambio de mercancías, toda vez que reduce costos y hace más ágil la actividad comercial. La utilización de esta logística representa una ventaja competitiva con respecto de otras empresas por la optimización del capital y ahorro de tiempo.

  16. Biomarcadores para fibrosis hepática, avances, ventajas y desventajas

    Directory of Open Access Journals (Sweden)

    A. Cequera

    2014-07-01

    En este trabajo se describen los biomarcadores empleados actualmente para el estudio de la fibrosis hepática en humanos, incluyendo sus ventajas y desventajas y la implementación de tecnologías de nueva generación, y la evaluación de las posibilidades de su empleo para el diagnóstico.

  17. Las estrategias de marketing en tiendas virtuales y las ventajas competitivas: un estudio de caso

    Directory of Open Access Journals (Sweden)

    Vinícius Silva Pereira

    2011-09-01

    Full Text Available Este artículo tiene como objetivo identificar y analizar el mix de marketing de Submarino.com y las ventajas competitivas conferidas por ésta. Se realizó un estudio de caso de Submarino.com, una compañía líder en ventas en Internet de Brasil, dentro de un enfoque cualitativo. Se observó que la forma en que el Submarino utiliza el mix de marketing está en línea con su visión estratégica declarada. Así que la empresa puede diferenciarse de la competencia y establecer barreras a la entrada de nuevos competidores, obteniendo una ventaja competitiva como: el pionero, una red de relaciones con proveedores y clientes, el surtido de productos, entre otros.

  18. Ventajas del ingreso en el hogar como forma de atención ambulatoria

    Directory of Open Access Journals (Sweden)

    Isnoel Saura de la Torre

    1998-10-01

    Full Text Available Se ofrece una revisión actualizada sobre las ventajas que ofrece el ingreso en el hogar como forma de atención ambulatoria, para el paciente, la familia, la comunidad, los profesionales de la salud y el Estado; donde se exponen 15 ventajas sacadas de la literatura nacional y extranjera con un total de 30 referencias bibliográficas. Puede servir de marco teórico para incentivar la realización de investigaciones para su desarrolloAn updated review on the advantages of home admission as a form of ambulatory care for the patient, the family, the community, the health professionals and the State is made. 15 advantages obtained from the national and foreign literature with a total of 30 bibliographic references are put into the readers’ consideration. This may be used a theoretical basis to encourage research for developing this type of admission

  19. Entorno y desarrollo de ventajas competitivas: esquema conceptual para analizar el entorno de las empresas

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Restrepo R.

    2010-12-01

    Full Text Available Desarrollar ventajas competitivas requiere que las empresas estén en capacidad de monitorear y analizar el entorno. Este artículo presenta una propuesta conceptual para analizar el entorno de las empresas de una manera integral. Se presenta una revisión de la literatura que relaciona la estrategia y el entorno, así como la literatura que explora el papel del entorno como determinante de la localización, en particular lo que tiene que ver con el efecto país. El artículo sugiere que se debe considerar, por una parte, el entorno inmediato de las empresas y, por otra, el entorno institucional. El impacto del entorno es relevante en cuanto permite a las empresas desarrollar ventajas basadas en la innovación.

  20. The standardization methods of radioactive sources (125I, 131I, 99mTc, and 18F) for calibrating nuclear medicine equipment in Indonesia

    International Nuclear Information System (INIS)

    Wurdiyanto, G; Candra, H

    2016-01-01

    The standardization of radioactive sources ( 125 I, 131 I, 99m Tc and 18 F) to calibrate the nuclear medicine equipment had been carried out in PTKMR-BATAN. This is necessary because the radioactive sources used in the field of nuclear medicine has a very short half-life in other that to obtain a quality measurement results require special treatment. Besides that, the use of nuclear medicine techniques in Indonesia develop rapidly. All the radioactive sources were prepared by gravimetric methods. Standardization of 125 I has been carried out by photon- photon coincidence methods, while the others have been carried out by gamma spectrometry methods. The standar sources are used to calibrate a Capintec CRC-7BT radionuclide calibrator. The results shows that calibration factor for Capintec CRC-7BT dose calibrator is 1,03; 1,02; 1,06; and 1,04 for 125 I, 131 I, 99m Tc and 18 F respectively, by about 5 to 6% of the expanded uncertainties. (paper)

  1. The standardization methods of radioactive sources (125I, 131I, 99mTc, and 18F) for calibrating nuclear medicine equipment in Indonesia

    Science.gov (United States)

    Wurdiyanto, G.; Candra, H.

    2016-03-01

    The standardization of radioactive sources (125I, 131I, 99mTc and 18F) to calibrate the nuclear medicine equipment had been carried out in PTKMR-BATAN. This is necessary because the radioactive sources used in the field of nuclear medicine has a very short half-life in other that to obtain a quality measurement results require special treatment. Besides that, the use of nuclear medicine techniques in Indonesia develop rapidly. All the radioactive sources were prepared by gravimetric methods. Standardization of 125I has been carried out by photon- photon coincidence methods, while the others have been carried out by gamma spectrometry methods. The standar sources are used to calibrate a Capintec CRC-7BT radionuclide calibrator. The results shows that calibration factor for Capintec CRC-7BT dose calibrator is 1,03; 1,02; 1,06; and 1,04 for 125I, 131I, 99mTc and 18F respectively, by about 5 to 6% of the expanded uncertainties.

  2. SOBRE LAS VENTAJAS DE LA ALIANZA DEL PACÍFICO PARA COLOMBIA

    Directory of Open Access Journals (Sweden)

    Iván Alejandro Trujillo Acosta

    2014-01-01

    Full Text Available La Alianza del Pacífico (AP es un área de integración de interés en las relaciones internacionales. No obstante, existe un vacío en la literatura sobre las ventajas de ésta para la política exterior de Colombia. Este artículo busca analizar las ventajas de la AP para Colombia. Se defiende la idea que la AP ofrece ventajas para la inserción internacional de Colombia basadas tanto en las características de esa área de integración como en las oportunidades que ofrece para su política exterior. La AP es un área de integración que tiene en sus instituciones una agenda definida de integración, la cosecha temprana de las negociaciones, el seguimiento a las cumbres y una presidencia pro témpore eficaz. Por otra parte, le ofrece a Colombia un área de integración sin tensiones con otros actores, instrumentos para diversificar sus relaciones con el mundo y una opción de liderazgo regional desde la persuasión.

  3. Ventajas comparativas en el comercio agroalimentario, México y Estados unidos 2007-2011

    Directory of Open Access Journals (Sweden)

    Carlos Ricardo Menéndez Gámiz

    2013-06-01

    Full Text Available En este artículo se realiza una revisión del estado actual de las ventajas comparativas de México y Estados Unidos en el mercado agroalimentario mundial. Se recurre a las ventajas comparativas, como una herramienta de la teoría económica, aplicada en el análisis de los diez capítulos agropecuarios y catorce agroalimentarios del Sistema armonizado del comercio internacional (HS por sus siglas en inglés, para el período 2007 a 2011. Se encontró que en México hay 8 capítulos con Ventaja comparativa, y en Estados Unidos 10 de los 24. Para México el escenario es desfavorable en relación con la economía agrícola más grande del mundo, cuando en junio del 2013 se propuso apoyo por 890 mil millones de dólares para la “Farm Bill” 2014-2018 en EE.UU.

  4. Variables críticas en las ventajas competitivas de restaurantes gourmet, La Serena, Chile

    Directory of Open Access Journals (Sweden)

    Segundo Ricardo Cabana Villca

    2015-12-01

    Full Text Available La investigación se centró en analizar las variables que influyen en el logro de las ventajas competitivas en empresas pertenecientes al mercado gastronómico gourmet en La Serena, Chile. Para esto se construyó un modelo que relaciona la calidad de servicio, satisfacción, lealtad, vínculo relacional y ventaja competitiva, creando hipótesis entre las variables y validándolas con una muestra significativa de clientes. Para contrastar las hipótesis se utilizó el método de modelos estructurales a través del método basado en covarianza (MBC. Concluyendo que la ventaja competitiva en negocios de restaurante gourmet si bien depende significativamente de la lealtad de los clientes, esto mismo provoca que sea relevante que exista una gestión proactiva sistémica, centrada en la calidad de servicio y la satisfacción que se genera. Como consecuencia de lo anterior, además debe lograr un vínculo relacional con el cliente como consecuencia de la lealtad del mismo. Por lo tanto, en esta industria las empresas sólo tendrán un crecimiento sostenible sí la lealtad del cliente es un activo que asume un rol de cliente socio que contribuye en la creación de una propuesta de valor innovadora

  5. Ventajas, inconvenientes e impactos territoriales del comercio electrónico

    Directory of Open Access Journals (Sweden)

    Fernando Moliní Fernández

    2002-01-01

    Full Text Available Este artículo analiza las ventajas e inconvenientes de Internet para las empresas y reflexiona sobre sus implicaciones territoriales. Se comentan algunos casos particularmente relevantes de tiendas de comercio electrónico, se desarrollan los principales elementos positivos que representa Internet, se señalan los aspectos negativos, se hace una reflexión sobre el modelo de empresa más competitivo y se comenta el impacto geográfico de las empresas que venden en la Web

  6. La mediana empresa familiar peruana y la creación de ventajas competitivas

    OpenAIRE

    David Wong; Carlos Parodi Trece; Martín Monsalve

    2012-01-01

    "En el siguiente documento se aborda desde una perspectiva administrativa, económica e histórica la evolución de la mediana empresa y la creación de ventajas competitivas en este sector a lo largo del siglo XX y principios del XXI. Se analiza el impacto de la mediana empresa en la economía peruana y su desarrollo histórico como institución administrativa y económica, a partir del caso de Gráficas C, una empresa familiar donde la segunda generación, bajo la guía del fundador, comienza a asumir...

  7. Estudio de ventajas energéticas en un proceso de destilación

    Directory of Open Access Journals (Sweden)

    Carlos Ariel Cardona Alzate

    2013-04-01

    Full Text Available Este trabajo desarrolla un método para comparar los gastos energéticos entre las configuraciones secuencial (reacción-separación y simultánea (destilación reactiva, analizando los flujos internos y externos de un proceso. Como ejemplo se utilizó una reacción tipo: A + B D C + D; con temperaturas de saturación: TCσventaja de la destilación reactiva sobre los procesos convencionales para este tipo de procesos.

  8. Ventajas y desventajas del desarrollo rural sostenible en ambientes de montaña Ventajas y desventajas del desarrollo rural sostenible en ambientes de montaña

    Directory of Open Access Journals (Sweden)

    Hildegardo Córdova Aguilar

    2009-12-01

    Full Text Available Rural and urban worlds are the two columns that support a society within a given territory. Often, we dedicate much attention to the urban sector because it contains near 60% of the world population and generates and dynamics the contemporary economies. We talk much of the rural sector but do little to solve its problems, especially to bettering the quality of life of the poorest, which in global terms are living in the mountain areas of the world.In this paper I analyze the advantages and disadvantages of the mountain environments to sustainable human development that allows bettering the quality of life of their populations. I insist on resources quality and control and urban demand. I also point out to the infrastructure difficulties and its effects in the circulation of goods and services. The case study is settled at the Sierra of the Department of Piura, northwest Perú, where there is a rural population mostly dedicated to subsistence activities while in the coastal lowlands dominates commercial agriculture.El mundo rural y el urbano son los dos pilares que sostienen a una sociedad dentro de un territorio dado. Se viene dedicando considerable atención al sector urbano porque allí se concentra cerca del 60% de la población mundial y porque allí se generan y dinamizan las economías contemporáneas. Del sector rural se habla mucho y se hace poco, especialmente para mejorar la calidad de vida del subgrupo de los más pobres, que en términos globales se encuentran en los territorios montañosos del mundo.En esta ponencia se analizarán las ventajas y desventajas que presentan estos territorios para el desarrollo humano sostenible, que permita mejorar las condiciones de vida de sus poblaciones. Se insistirá en la calidad y control de los recursos y en las demandas urbanas. Asimismo se hará notar las dificultades de infraestructura y sus efectos en la circulación de bienes y servicios. Como ejemplo se tomará el sector de la sierra del

  9. Quality control for the equipment of Nuclear medicine: experience of the H.U. de la Princesa; Control de calidad del equipamiento en Medicina Nuclear. Experiencia enel H.U. de la Princesa

    Energy Technology Data Exchange (ETDEWEB)

    Espana, M.L.; Gracia, A.; Prieto, C.; Lopez F, P. [Servicio de ProteccionRadiologica. Hospital Universitario de la Princesa C/ Diego de Leon 62, 28006Madrid (Spain)

    1998-12-31

    The quality control of the equipment used in a nuclear medicine service is a fundamental aspect in the Quality Assurance Program that in the present time is starting in our hospital. the objective of this work is to present the internal protocol used, its problematic associated with its starting, and the results obtained in the quality control as of the gamma camera as of the activimeter. In addition to the equipment own to the nuclear medicine service it has been used a Cs-137 source and puppets for several purposes. The results obtained demonstrated the stability of the controlled parameters which has led us to a restating of the established periodicities in our internal protocol, over all for some constancy tests. (Author)

  10. Construcciones agrarias en madera: una ventaja en la integración en el paisaje

    Directory of Open Access Journals (Sweden)

    Cañas Guerrero, Ignacio

    1991-02-01

    Full Text Available Aesthetic values conservation are more important every day. Wooden constructions are better for this conservation. Construction impact on landscape can be analyzed by two ways; Synthetic and Analytic methods. Using at first a list of wood adventages (based in comparing photographs can be found. It is a natural material and it can be selected a great kind of textures and colours, visual, auditory tactile, smelling and gustative comfort is provided. Psychological factors are in favour of wooden constructions. Assembling and demolition cause less landscape impact. Nevertheless, Analytic method are based on physics and aesthetics components analysis. Physics components are walls materials, buildings distribution and services in buildings. Aesthetics components are shape, sacale. line and colour in a first group and texture in a second. Otherwise the texture wood has different posibilities, its own nature, finished treatement and boards position.

    La conservación de los valores estéticos del paisaje cobran cada día más importancia; en este aspecto las construcciones en madera aportan una serie de ventajas. Para analizar el impacto de las construcciones contamos con dos métodos: Sintético y Analítico. En el primero, basado en el estudio de pares de fotografías, encontramos que la madera tiene una serie de ventajas: es un material natural, ofrece una variedad de colores y texturas, posee confortabilidad visual, auditiva, táctil, olfativa y gustativa, intervienen favorablemente factores sicológicos, se provoca un menor impacto paisajístico a la hora del montaje con un envejecimiento más noble y, llegado el momento, una mayor facilidad para su demolición. El Analítico, sin embargo, se basa en el estudio de los componentes físicos y estéticos. Dentro de los componentes físicos se consideran los materiales, los cerramientos y la distribución de los edificios y obras accesorias. En los componentes estéticos hablamos de la

  11. La internacionalización de la empresa y la ventaja competitiva

    Directory of Open Access Journals (Sweden)

    Jorge Antonio Murillo Ortíz

    2000-07-01

    Full Text Available Debido a la creciente globalización de las economías, se hace imperativa la formulación, fijación y estructuración de estrategias de internacionalización. La mayoría de las Pymes (pequeñas y medianas empresas no han diseñado una estrategia de acceso a los mercados externos, aún cuando cada vez se hace más necesaria, dentro del mercado neoliberal, la internacionalización de la empresa con el fin no solo de no depender de los mercados domésticos, sino de tener participación en ambos mercados, lo cual trae muchas ventajas como la diversificación del portafolio, la presencia en dos mercados, la generación de divisas, el tener mayor competitividad, etc. El presente artículo tiene como objetivo proporcionar herramientas y elementos a los directivos de las empresas sobre como diseñar estrategias de acceso a los mercados internacionales, ya sea en forma directa, indirecta o mixta...

  12. La interacción sistema familia y sistema empresa como fuente de ventaja competitiva

    Directory of Open Access Journals (Sweden)

    Jon Sánchez

    2012-01-01

    Full Text Available El objetivo de este trabajo es identificar y valorar las características positivas de las empresas familiares que pueden ser fuentes de ventajas competitivas, así como las prácticas de gestión, específicas de este tipo de empresas, eficaces para la mejora de su competitividad. Para ello se han utilizado técnicas cualitativas contrastadas (Focus Group, Técnica de Grupo Nominal y Método Delphi, que recogen, procesan y mejoran de una forma explícita, razonada y sistemática la información subjetiva o cualitativa que poseen los expertos en empresas familiares. Los resultados indican que la visión a largo plazo que tiene la empresa familiar derivada de su afán de supervivencia, y la mayor dedicación e implicación de los propietarios son las características más valoradas, siendo la planificación con tiempo de la sucesión en la dirección de la empresa la práctica más importante.

  13. Ventajas y desventajas de la Sociedad por Acciones Simplificada para la empresa familiar en Colombia. Estudio exploratorio

    Directory of Open Access Journals (Sweden)

    José Bernardo Betancourt Ramírez

    2013-04-01

    Full Text Available La Sociedad por Acciones Simplificada (SAS representa la evolución más significativa del sistema societario colombiano en las últimas 4 décadas. Desde su aparición representa cerca del 90% del total de sociedades matriculadas en el país. Este estudio exploratorio descriptivo busca determinar si los empresarios conocen las ventajas y desventajas de las SAS, y si las tienen en cuenta en la toma de decisiones. Se aplicó un cuestionario estructurado a 57 empresas, de las cuales el 84% eran familiares. Se observó un amplio desconocimiento de algunas ventajas y desventajas de la SAS que implica el desaprovechamiento de sus bondades y, en casos puntuales, riesgos para las empresas familiares.

  14. Ventajas y desventajas de la Sociedad por Acciones Simplificada para la empresa familiar en Colombia. Estudio exploratorio

    Directory of Open Access Journals (Sweden)

    José Bernardo Betancourt Ramírez

    2013-01-01

    Full Text Available La Sociedad por Acciones Simplificada (SAS representa la evolución más significativa del sistema societario colombiano en las últimas 4 décadas. Desde su aparición representa cerca del 90% del total de sociedades matriculadas en el país. Este estudio exploratorio descriptivo busca determinar si los empresarios conocen las ventajas y desventajas de las SAS, y si las tienen en cuenta en la toma de decisiones. Se aplicó un cuestionario estructurado a 57 empresas, de las cuales el 84% eran familia- res. Se observó un amplio desconocimiento de algunas ventajas y desventajas de la SAS que implica el desaprovechamiento de sus bondades y, en casos puntuales, riesgos para las empresas familiares.

  15. Nuclear medicine

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The area of nuclear medicine, the development of artificially produced radioactive isotopes for medical applications, is relatively recent. Among the subjects covered in a lengthy discussion are the following: history of development; impact of nuclear medicine; understanding the most effective use of radioisotopes; most significant uses of nuclear medicine radioimmunoassays; description of equipment designed for use in the field of nuclear medicine (counters, scanning system, display systems, gamma camera); description of radioisotopes used and their purposes; quality control. Numerous historical photographs are included. 52 refs

  16. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Children's (Pediatric) Nuclear Medicine? What are some common uses of the procedure? How does the nuclear medicine procedure work? What does the equipment look like? How is ...

  17. Equipment considerations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Trace or ultratrace analyses require that the HPLC equipment used, including the detector, be optimal for such determinations. HPLC detectors are discussed at length in Chapter 4; discussion here is limited to the rest of the equipment. In general, commercial equipment is adequate for trace analysis; however, as the authors approach ultratrace analysis, it becomes very important to examine the equipment thoroughly and optimize it, where possible. For this reason they will review the equipment commonly used in HPLC and discuss the optimization steps. Detectability in HPLC is influenced by two factors (1): (a) baseline noise or other interferences that lead to errors in assigning the baseline absorbance; (b) peak width. 87 refs

  18. Calculation of an analytical memory for the installation of a PET-CT equipment in the Nuclear Medicine Department of the National Institute of Cancerology

    International Nuclear Information System (INIS)

    Trujillo Z, F.E.; Gomez A, E.

    2007-01-01

    The studies with a PET-CT equipment combines the metabolic information that provides the Positron Emission Tomography technique (PET), with the morphological data offered by the Computerized Tomography (CT). In Mexico, it will have the first PET-CT equipment, for a public service hospital. Since that makes use of radioactive material (emission of annihilation photons with 511 keV) and X rays, is necessary to calculate the necessary shielding for the PET-CT equipment room and for the area where it is managed or have presence of radioactive material (mainly fluorodeoxyglucose labelled with F-18, i.e. FDG-F18). It is presented a summary of the calculations and necessary considerations so that the shielding allows to fulfill with the official doses limits in Mexico (50 mSv/year for Occupationally Exposure Personnel, OEP and 5 mSv/year for public in general), taking into account the adjacent areas to the installation. It is concluded with the shielding thickness required for the walls and roof of the installation, having a maximum of 20 cm of concrete (ρ = 2.35 g/cm 3 ) for the administration room of radioactive material to the patients and a minimum of 1 mm of lead for the room of the PET-CT equipment, having taken into account the dimensions of each area. (Author)

  19. Ventajas de los materiales de cambio de fase en la comercialización de productos de la pesca

    OpenAIRE

    Domínguez Alonso, Manuel; García Rodríguez, Carmen; Arias Carrillo, José Maria

    2012-01-01

    Se exponen y discuten las ventajas que se han encontrado en el empleo de los materiales de cambio de fase o PCM, en la comercialización de todos los tipos de productos acuáticos, sobre todo: en el enfriamiento de especies marinas de difícil comercialización, en su transporte hasta puerto, en los de larga duración y en vivo. Se describen los PCM más adecuados y las técnicas de su empleo para las principales aplicaciones que se han visto, facilitando los sistemas de cálculo para su comer...

  20. Gestión empresarial orientada al valor del cliente como fuente de ventaja competitiva. Propuesta de un modelo explicativo

    OpenAIRE

    Torres Moraga, Eduardo; Valenzuela, Leslier

    2009-01-01

    La globalización y el entorno altamente competitivo exigen a las empresas estar orientadas al mercado y gestionar su cartera de clientes como un activo estratégico clave para aumentar la rentabilidad del negocio y lograr una ventaja competitiva sostenible en el tiempo. El objetivo de este artículo es contribuir con una propuesta de modelo basado en el valor de la cartera de clientes para ayudar a las empresas a tomar mejores decisiones estratégicas de marketing. Las hipótesis formuladas ha...

  1. Grupo Semco y las prácticas de recursos humanos de alto compromiso, una ventaja competitiva

    Directory of Open Access Journals (Sweden)

    Juan Nicolás Montoya Monsalve

    2012-12-01

    Full Text Available El presente artículo de reflexión trata de determinar si las prácticas de recursos humanos orientadas a mejorar el compromiso de los empleados con la empresa reportan una identidad común y diferenciadora del resto de empresas, logrando de esta forma una ventaja competitiva. Además de la fundamentación teórica, para analizar el objetivo principal señalado se han utilizado elementos del método del caso, que ayudan a determinar nuevas variables de estudio y permiten comprobar si existen realidades empresariales que consigan alcanzar, a través de las prácticas de alto compromiso, un mejor desempeño y una mayor pertinencia con las organizaciones, y estudiar cómo lo han conseguido. En esta parte de análisis empírico, se analiza la organización Semco, una compañía brasileña que ha atraído el interés de los expertos por las innovadoras prácticas en la gestión del talento humano, su diseño organizativo y la generación de una identidad propia, como base de su ventaja competitiva.

  2. TECNOLOGÍA DE INFORMACIÓN Y VENTAJA COMPETITIVA: EL CASO DE LOS SISTEMAS ERP EN CHILE

    Directory of Open Access Journals (Sweden)

    Patricio Ramírez C.

    2007-05-01

    Full Text Available Este trabajo presenta un examen de los factores que anteceden la integración exitosa de una tecnología de información, como son los sistemas ERP (Enterprise Resources Planning, y cuales de estos factores pueden generar una ventaja competitiva sostenible para la empresa. El análisis se basa en un estudio empírico que indagó el fenómeno de implantación exitosa de sistemas ERP en 72 grandes empresas chilenas y lo contrastó con un modelo de investigación propuesto por los autores, utilizando para estos efectos la técnica PLS (Partial Least Square de modelado de ecuaciones estructurales. Basados en el enfoque conceptual de la teoría de recursos y capacidades, los resultados de la investigación indican que el aprendizaje y la predisposición para el cambio (en conjunción con los otros factores antecedentes del éxito de un sistema ERP y del propio ERP pueden ser fuentes de una ventaja competitiva sostenible.

  3. La estrategia, la estructura y las formas de asociación: Fuentes de ventaja competitiva para las pymes colombianas.

    Directory of Open Access Journals (Sweden)

    Francisco Velásquez Vásquez

    2004-01-01

    Full Text Available En este artículo se presenta la importancia de la estrategia, de la estructura y de las formas de asociación de las pequeñas y medianas empresas colombianas (Pymes como fuentes de ventajas competitivas en el entorno internacional. En una primera parte se muestra qué tanto las naciones desarrolladas, como las emergentes, comparten una alta proporción de Pymes en su estructura económica, e igualmente se identifica la caracterización de las mismas en el mundo. En una segunda parte los estudios sobre el diagnóstico de las Pymes colombianas señalan la ausencia de prácticas empresariales competitivas. En una tercera parte se describen distintos modelos teóricos que explican los ciclos de vida de las organizaciones. Adicionalmente se muestran las perspectivas de las Pymes en la primera década del siglo XXI. El artículo finaliza con unas conclusiones y recomendaciones sobre ventajas competitivas para que las Pymes colombianas puedan multiplicar de manera significativa las exportaciones no tradicionales en los próximos años.

  4. ORIENTACIÓN AL MERCADO Y VENTAJA COMPETITIVA: ANÁLISIS EN EL CONTEXTO HOTELERO DE CIUDAD JUÁREZ, CHIHUAHUA

    Directory of Open Access Journals (Sweden)

    Rosa Isabel Medina Parra

    2014-02-01

    Full Text Available Aquellas empresas que deseen alcanzar el éxito deben desarrollar una serie de recursos y capacidades básicas distintivas propias y trascendentes que les permitan desarrollar ventajas competitivas que sean valoradas por el consumidor, sean sostenibles y resulten determinantes en el resultado empresarial (Mazaira, Dopico y González, 2005. La base del éxito del desempeño de las empresas radica en la ventaja competitiva, definida como aquellas ventajas que posee una empresa frente a otras empresas del mismo sector o mercado, que le permite sobresalir y tener una posición superior a la de sus competidores (Porter, 1985, aquello que una compañía puede hacer mejor que sus competidores, denominada también como competencia clave (Chase, Aquilano y Jacobs, 2009, logrando lealtad en la repetición de compras, crecimiento, participación del mercado y rentabilidad (Alarcón, 2008.

  5. Logística Integral: Una alternativa para crear valor y ventajas competitivas en las pequeñas y medianas empresas (pymes) del Sector Calzado

    OpenAIRE

    Villarreal Segoviano, Francisco Javier

    2012-01-01

    En este documento se plantea la ventaja competitiva como el resultado que las empresas buscan lograr en un contexto global y de hipercompetitividad; para lograr esto se necesitan estrategias que impulsen esas ventajas competitivas en un ambiente cambiante y dinámico, una de estas estrategias es la logística integral, que busca el equilibrio de la estructura de la cadena de valor de negocio y lograr una interacción y operación eficiente de las áreas de una manera en que las actividades proyect...

  6. Las ventajas y desventajas que el vínculo multiempresa y la red de cooperación empresarial internacional presentan para la PYME

    OpenAIRE

    González Alvarado, Tania Elena

    2008-01-01

    El objetivo del presente trabajo es exponer las ventajas y desventajas que el vínculo multiempresa y la red de cooperación empresarial internacional presentan a la PYME. El vínculo multiempresa permite que la empresa participe en mercados extranjeros al insertarse en una red internacional y, a su vez, propicie el desarrollo local. Para lograr dicho objetivo se analizan cinco casos resaltando en cada uno de ellos las ventajas y desventajas que el vínculo multiempresa ofrece y la forma en que l...

  7. Implementation of a quality control program of the equipment of the nuclear medicine services in Chile; Implementacion de un programa de control de calidad del equipamiento de los servicios de medicina nuclear de Chile

    Energy Technology Data Exchange (ETDEWEB)

    Astudillo, R.; Diaz, G.; Ferreira, A.; Garcia, M.; Hermosilla, A.; Pacheco, F.; Vasquez, M. [Universidad de la Frontera, Departamento de Ciencias Fisicas, Av. Francisco Salazar 1145, Temuco 4811230, Araucania (Chile); Coca, M., E-mail: ferreira.sdgr@gmail.com [MedScan Concepcion, Paicavi 270, Concepcion (Chile)

    2014-08-15

    Now days in Chile there are more of 43 Nuclear Medicine centers; most of them have gamma cameras in order to study physiological process in diagnostic and treatment of patients pathologies. This requires having the equipment in optimal operating condition and it is ensured with quality control programs that are based on a series of tests relating to protocols, such as TECDOC-602 y AAPM No.6. Planar test often applied in gamma cameras including: spatial resolution, spatial linearity, sensitivity and uniformity. SPECT tests consider: tomography uniformity, rotation center tomography resolution and total performance. The tests in dose calibrator are: background measurement, accuracy, precision, linearity and reproducibility. The tests above require the use of radioactive sources and specific simulators patterns or phantom based on international standards such as The National Electrical Manufacturers Association (Nema), International Atomic Energy Agency (IAEA) and The American Association of Medical Physics (AAPM). In this work we carried out several tests of quality control in a Nuclear Medicine Center of Temuco and we propose to implement the applied methodology in others similar Chilean centers. (author)

  8. Utilización de MOOCS en la formación docente: ventajas, desventajas y peligros

    Directory of Open Access Journals (Sweden)

    Ilich Silva Peña

    2014-01-01

    a la luz de las necesidades de formación de docentes. Se presentan las grandes ventajas que tendrían estos cursos para resolver algunos de los problemas de dotación docente a nivel internacional y actualización del conocimiento del profesorado. Se muestran también algunas desventajas frente a los procesos formativos más tradicionales. Sin embargo, el artículo discute principalmente los peligros a los que se enfrenta la utilización de MOOCs en la formación docente presentando una alerta a los problemas de la regulación a través del mercado y los que podrían generarse a través de una neocolonización.

  9. VENTAJAS ARANCELARIAS OTORGADAS POR ESTADOS UNIDOS POR MEDIO DEL ATPDEA, APROVECHABLES PARA LAS PyMES DE BOGOTA Y CUNDINAMARCA

    Directory of Open Access Journals (Sweden)

    Mario Ernesto

    2003-07-01

    Full Text Available En medio de la crisis de desempleo, pobreza y desigualdad que afronta Colombia, las pequeñas y medianas empresas se han convertido en una alternativa importante de generación de trabajo y valor agregado. Sin embargo, éstas deben aprovechar las ventajas que se otorgaron al país en el marco del ATPDEA, por medio del cual los Estados Unidos concedió preferencias arancelarias a más de cinco mil seiscientos productos que estuvieron vigentes durante más de diez años, y que luego, a partir de septiembre del 2002, se ampliaron en más de seiscientos productos. En este trabajo se presentan los rubros de la lista adicional, que presentan posibilidades de exportación a los Estados Unidos por parte de las PyMES de Bogotá y Cundinamarca.

  10. Evaluation of the Nuclear Medicine facilities in Minas Gerais state: quality control program of equipment; Avaliacao dos servicos de Medicina Nuclear do estado de Minas Gerais: programa de controle de qualidade dos equipamentos

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Tadeu Takao Almodovar; Biancardi, Rodrigo; Rocha, Adriana Marcia Guimaraes; Ferreira, Denia Romao; Silva, Franciele Aquiles Anjos; Assuncao, Jonathan Buenos Aires; Alves, Ederson Henrique; Almeida, Ana Flavia Batista; Alves, Nathalia Fernandes; Xavier, Faber Henrique Zacarias; Gontijo, Rodrigo Modesto Gadelha; Mamede, Marcelo, E-mail: mamede.mm@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), Belo Horizonte, MG (Brazil); Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento Anatomia e Imagem

    2017-11-01

    With the reformulation of the CNEN-NN-3.05 standard in December 2013, Brazil's Nuclear Medicine (NMS) services have to perform a greater number of quality controls for SPECT and PET equipment. However, little is known about the reality of the quality control programs of these services regarding the application of the new standard. Thus, in this context, the objective of the present study was to evaluate the quality control program of MNSs in the state of Minas Gerais. All NMSs in the state of Minas Gerais were invited to participate in the project. Of these, 34.48% (20 facilities) agreed to participate in the project, 50.00% (29 facilities) did not respond to the invitation and 15.52%(9 facilities) declined their participation. Thus, as of November 2015, 20 SPECT and 2 PET/CT equipment were evaluated for the performance of the quality control tests recommended by the new CNEN standard. The phantoms required for the evaluation came from the Laboratory of Dosimetry and Quality Control of UFMG. Even with the deadlines set by CNEN for the implementation of the quality control program in the NMSs, more than 50% of the evaluated services did not implement the quality controls, and the absence of specific phantoms is the main reason for the failure. Among the problems found in the installations, the most critical were: collimators with no conditions of use in the clinical routine, linearity problems of the evaluated image and values of image uniformity superior to the limits of acceptance. Problems in the uniformity and linearity of the image found directly impacted the performance of other tests, such as spatial resolution, SPECT performance, among others. In a general way, the NMSs in the state of Minas Gerais evaluated with the present study are in clinical feasible conditions. (author)

  11. [Hydrotherapy equipment].

    Science.gov (United States)

    Tsibikov, V B; Ragozin, S I; Mikheeva, L V

    1985-01-01

    A flow-chart is developed demonstrating the relation between medical and prophylactic institutions within the organizational structure of the rehabilitation system and main types of rehabilitation procedures. In order to ascertain the priority in equipping rehabilitation services with adequate hardware the special priority criterion is introduced. The highest priority is assigned to balneotherapeutic and fangotherapeutic services. Based on the operation-by-operation analysis of clinical processes related to service and performance of balneologic procedures the preliminary set of clinical devices designed for baths, basins and showers in hospitals and rehabilitation departments is defined in a generalized form.

  12. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... the procedure? How does the nuclear medicine procedure work? What does the equipment look like? How is the procedure performed? What will my child experience during and after the procedure? How should ...

  13. Cryogenic equipment

    International Nuclear Information System (INIS)

    Leger, L.; Javellaud, J.; Caro, C.; Gilguy, R.; Testard, O.

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [fr

  14. Gerencia del conocimiento y tecnologías de información como fuentes de ventajas competitivas

    Directory of Open Access Journals (Sweden)

    Judith Colina

    2005-05-01

    Full Text Available Hoy en día existe un gran interés en lo que concierne al conocimiento en las organizaciones, todo esto apunta al hecho de que el conocimiento es fundamental para el éxito y hasta para lograr la supervivencia de cualquier organización. La elaboración de este artículo tiene por objeto abordar algunos aspectos relativos al marco conceptual de la gestión del conocimiento y su relación con las Tecnologías de Información así como su importancia y efectividad en las organizaciones al ser considerada como fuente de ventajas competitivas. Se concluye que la empresa más eficaz será aquella que permita a sus trabajadores un mayor rendimiento, proporcionándoles un acceso rápido a la información así como las herramientas necesarias para organizar y compartir el conocimiento de forma efectiva dentro de la organización.

  15. ¿Puede la participación transformarse en una fuente de ventaja competitiva en las microfinancieras no convencionales?

    Directory of Open Access Journals (Sweden)

    Ronie Zamor

    2002-02-01

    Full Text Available En la actualidad, el término participación se está convirtiendo en una palabra clave en muchas instituciones. La participación tiene varios niveles de intensidad; dependiendo de los objetivos de las organizaciones se puede aspirar a más o menos intensidad de participación. Cualquier organización que tiene como objetivo incidir en el desarrollo de las comunidades tiene que abrir espacios de participación. En las microfinancieras sin fines de lucro, ayuda a mejorar las relaciones humanas, fomenta el arraigo local, la sostenibilidad social y abre espacios para una auditoria social. Así una microfinancieras que tiene apoyo social es capaz de diseñar políticas estratégicas acordes a las necesidades de sus clientes mejorando su rentabilidad económica. La participación de los clientes se convierte en una fuente de ventaja competitiva para las organizaciones que saben aprovechar esta herramienta.

  16. Gestión empresarial orientada al valor del cliente como fuente de ventaja competitiva. Propuesta de un modelo explicativo

    Directory of Open Access Journals (Sweden)

    Leslier Valenzuela

    2008-10-01

    Full Text Available La globalización y el entorno altamente competitivo exigen a las empresas estar orientadas al mercado y gestionar su cartera de clientes como un activo estratégico clave para aumentar la rentabilidad del negocio y lograr una ventaja competitiva sostenible en el tiempo. El objetivo de este artículo es contribuir con una propuesta de modelo basado en el valor de la cartera de clientes para ayudar a las empresas a tomar mejores decisiones estratégicas de marketing. Las hipótesis formuladas han sido contrastadas a través de un modelo estructural con constructos fiables que han sido aplicados al sector turístico, específicamente, a las agencias de viajes en España. Los resultados revelan que existe una relación positiva y significativa entre el grado de orientación al valor del cliente y las mejores decisiones estratégicas de marketing. Finalmente, el estudio presenta las conclusiones e implicaciones que estos resultados pudieran tener para la gestión empresarial.

  17. El clúster de salud en Medellín, ventaja competitiva alternativa para la ciudad

    Directory of Open Access Journals (Sweden)

    Jorge Andrés Marulanda Montoya

    2010-08-01

    Full Text Available El presente artículo es una explicación del porqué el Clúster de salud en la ciudad de Medellín, tras su consolidación, se puede convertir en una ventaja competitiva alternativa de alto valor agregado para la ciudad, con miras a la exportación de servicios médicos y odontológicos, caracterizado por el vanguardismo en investigación y desarrollo en procedimientos médicos especializados. El alto nivel desarrollado en Salud, unido a una adecuada consolidación de los sectores educativos, industriales, comerciales (turismo y de servicios (transporte, tanto de la ciudad como de otras zonas del departamento de Antioquia, complementan el desarrollo de la iniciativa con el fin de generar factores diferenciales de competitividad en materia social y económica. En la actualidad, la estrategia Clúster de la ciudad de Medellín y Antioquia , le apuesta a cinco sectores económicos que se enuncian en el artículo; es por ello que los autores argumentan cómo el Clúster de Salud presenta actualmente el mayor potencial competitivo en comparación con los otros cuatro.

  18. Eugenol: propiedades farmacológicas y toxicológicas. Ventajas y desventajas de su uso

    Directory of Open Access Journals (Sweden)

    Raimara González Escobar

    2002-08-01

    Full Text Available El Eugenol es un derivado fenólico conocido comúnmente como esencia de clavo, que es utilizado desde hace varios siglos en la práctica odontológica. Por sus propiedades farmacológicas tiene diferentes usos. Sus efectos farmacológicos son complejos y dependen de la concentración del Eugenol libre a la cual el tejido se expone. En este trabajo se presentan sus características farmacológicas y toxicológicas; se mencionan algunos de los mecanismos de acción propuestos para ambos efectos, y se exponen algunos de los nuevos materiales que se utilizan actualmente en estomatología; se presentan sus usos y sus ventajas sobre las formulaciones de Eugenol ya existentes.Eugenol is a phenolic derivative, commonly known as "esencia de clavo", which has been used in dental practice for centuries. Its pharmacological properties determined different uses. Its pharmacological effects are complex and depend on the concentration of free Eugenol to which the tissue is exposed. This paper presents the pharmacological and toxicological characteristics of Eugenol; it mentions some of the mechanisms of action proposed for both effects and also presents some of the new materials used in dentistry nowadays. Their uses and advantages over already existing Eugenol formulations are set forth.

  19. Origins of eponymous orthopaedic equipment.

    Science.gov (United States)

    Meals, Clifton; Wang, Jeffrey

    2010-06-01

    Orthopaedists make great use of eponymous equipment, however the origins of these tools are unknown to many users. This history enriches, enlightens, and enhances surgical education, and may inspire modern innovation. We explored the origins of common and eponymous orthopaedic equipment. We selected pieces of equipment named for their inventors and in the broadest use by modern orthopaedists. We do not describe specialized orthopaedic implants and instruments owing to the overwhelming number of these devices. The history of this equipment reflects the coevolution of orthopaedics and battlefield medicine. Additionally, these stories evidence the primacy of elegant design and suggest that innovation is often a process of revision and refinement rather than sudden inspiration. Their history exposes surgical innovators as brilliant, lucky, hardworking, and sometimes odd. These stories amuse, enlighten, and may inspire modern orthopaedists to develop creative solutions of their own. The rich history of the field's eponymous instruments informs an ongoing tradition of innovation in orthopaedics.

  20. Sarcophagidae (Diptera de importancia forense en la puna de Catamarca, Argentina: la ovoviviparidad como ventaja en condiciones de extrema aridez

    Directory of Open Access Journals (Sweden)

    Fernando H. ABALLAY

    2011-01-01

    Full Text Available A pesar de ser fauna necrófaga y de estar presentes en cadáveres humanos, los Sarcophagidae no suelen utilizarse en estudios forenses debido a la dificultad en su identificación y la poca información sobre su biología. En este trabajo, se identificaron las especies de Sarcophagidae asociadas a cadáveres y se estudió su relación con los estados de descomposición. Se analizaron las preferencias por los sustratos cadavéricos (cerdo y llama y las condiciones microambientales (sol y sombra en un ambiente de altura (3.600 msnm, durante la primavera. Se utilizaron dos cadáveres de cerdo dispuestos al sol y a la sombra y un cadáver de llama dispuesto al sol. Se colectaron 597 individuos pertenecientes a cinco especies de Sarcophagidae: M. antofagastensis Mulieri, Mariluis & Aballay (n=347, M. quimaliensis (Lopes (n=117, M. rusca (Hall (n=32, M. penai (Lopes (n=5 y M. aulacophyto Pape (n=96. Tanto M. antofagastensis, como M. quimaliensis fueron las únicas especies con colonización efectiva y representaron el 78% del total de adultos colectados. Microcerella antofagastensis fue la colonizadora primaria. Ambas especies respondieron de forma similar ante las condiciones microambientales y prefirieron el cadáver de cerdo. Se discute la importancia de M. antofagastensis y M. quimaliensis, como especies indicadoras y las posibles ventajas de la ovoviviparidad frente a otras especies ovíparas, en condiciones de extrema aridez.

  1. Evidencia y recomendación. ¿Harmonic Ultracision ofrece ventajas en tiroidectomía?

    Directory of Open Access Journals (Sweden)

    José Luis PARDAL-REFOYO

    2016-07-01

    Full Text Available Introducción y objetivo: En un paciente con patología de tiroides [paciente] sometido a tiroidectomía [intervención] la técnica realizada con Harmonic Ultracision® (HU comparada con las técnicas convencionales (ligadura, electrocoagulación mono o bipolar y Ligasure® [comparación] ¿es más segura [resultado]? Material y método: Búsqueda bibliográfica en las bases de datos PubMed, Cochrane Library y Scopus con la estrategia de búsqueda «(((((ultrasonic scalpel OR harmonic AND thyroidectomy AND meta-analysis. Resultados: Nivel de evidencia: La evidencia de la ventaja del uso de HU en tiroidectomía frente a otras técnicas es alta respecto a la eliminación de las suturas, a la facilitación del acceso a espacios más reducidos, la reducción del tiempo quirúrgico, la reducción del sangrado intraoperatorio y postoperatorio, la reducción del hipoparatiroidismo transitorio, la reducción del dolor postoperatorio, la reducción de la estancia hospitalaria y reducción del coste. Conclusiones: Recomendación: La recomendación del uso de HU en tiroidectomía frenta a otras alternativas (cirugía convencional / Ligasure® es débil a favor porque reduce la incidencia de parálisis laríngea y es fuerte a favor debido a que reduce el tiempo operatorio, reduce el sangrado intraoperatorio y postoperatorio, reduce el volumen drenado, reduce la incidencia de hipocalcemia, reduce la estancia hospitalaria y el coste. La recomendación del uso de HU en tiroidectomía es fuerte a favor.

  2. Medical Issues: Equipment

    Science.gov (United States)

    ... Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily Life At ... curesma.org > support & care > living with sma > medical issues > equipment Equipment Individuals with SMA often require a ...

  3. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  4. Veterinary nuclear medicine

    International Nuclear Information System (INIS)

    Kallfelz, F.A.; Comar, C.L.; Wentworth, R.A.

    1974-01-01

    A brief review is presented of the expanding horizons of nuclear medicine, the equipment necessary for a nuclear medicine laboratory is listed, and the value of this relatively new field to the veterinary clinician is indicated. Although clinical applications to veterinary medicine have not kept pace with those of human medicine, many advances have been made, particularly in the use of in vitro techniques. Areas for expanded applications should include competitive protein binding and other in vitro procedures, particularly in connection with metabolic profile studies. Indicated also is more intensive application by the veterinarian of imaging procedures, which have been found to be of such great value to the physician. (U.S.)

  5. Selection of equipment for equipment qualification

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

  6. Nuclear Medicine

    Science.gov (United States)

    ... Parents/Teachers Resource Links for Students Glossary Nuclear Medicine What is nuclear medicine? What are radioactive tracers? ... funded researchers advancing nuclear medicine? What is nuclear medicine? Nuclear medicine is a medical specialty that uses ...

  7. Las capacidades de absorción del conocimiento como ventajas competitivas para la inserción de pymes en cadenas globales de valor

    OpenAIRE

    Jaime Olea-Miranda; Oscar F. Contreras; Mario Barcelo-Valenzuela

    2016-01-01

    El propósito del estudio es identificar las capacidades de absorción del conocimiento como fuente de ventajas competitivas que potencializan en las pymes las posibilidades de integrarse a las cadenas globales de valor. Para ello se realizó una revisión del estado del arte que fundamenta la propuesta de un modelo basado en 2 enfoques teóricos: el de sistemas de innovación y el de cadenas globales de valor. La implementación se realizó en pymes del noroeste de México en los sectores de tecnolog...

  8. Análisis del turismo nacional en las comunidades autónomas peninsulares españolas: especialización y ventaja competitiva

    Directory of Open Access Journals (Sweden)

    José J. Benítez Rochel

    2011-01-01

    Full Text Available En este artículo se presenta una aplicación del análisis shift share al turismo nacional entre las Comunidades Autónomas peninsulares españolas con datos sobre pernoctaciones hoteleras. De esta manera, se consigue una interpretación más completa de la información estadística disponible. Entre otras cosas, permite conocer la posición que cada región tiene en cuanto a su especialización y ventaja competitiva y, en consecuencia, se identifican los mercados según su potencial de desarrollo.

  9. Quality, height, age and home advantage in boxing. [Calidad, altura, edad y la ventaja de boxear en casa].

    Directory of Open Access Journals (Sweden)

    Miguel Pic

    2018-04-01

    Full Text Available Abstract The main objective of the present study was the identification of performance indicators in boxing and their impact on the concept of home advantage (HA, among other variables. Professional boxing bouts of the European ranking were selected (N = 522, to generate 1044 units of analysis. ANOVA and T-student analyzes were applied to determine the influence of the difference between boxers in: a quality, calculated by the number of combats won, opponent's quality, inactivity time, among other indicators; b height and c age, depending on the result obtained and the location of the combat. It was also used as an influential variable in the final result. By multivariate analysis (CHAID model, the quality difference between boxers was the most determinant variable (p <.000 to reach the final result, but it was also predictive regarding the combat location (p <.006. The study allowed for revealing determinant effects for the performance in boxing through the crossing of variables and analysis techniques. Suggesting coaches and boxing practitioners to do a thorough review of their training tasks based on the location of their commitments and the boxers’ characteristics means they would profit the specificity of each match. The calculation of the risk percentage assumed by professional boxers to achieve success in professional boxing, is one of the practical applications of this research. Resumen El objetivo principal del presente estudio fue la identificación de indicadores de rendimiento en boxeo y su incidencia sobre el concepto de ventaja de jugar en casa (HA, entre otras variables. Fueron seleccionados combates profesionales del ranking Europeo (N=522 dando lugar a 1044 unidades de análisis. Fueron aplicados análisis ANOVA y T-student para determinar la influencia de la diferencia entre boxeadores en: a calidad, calculada mediante el número de combates ganados, calidad del oponente, tiempo de inactividad, entre otros indicadores; b

  10. GESTIÓN DEL CONOCIMIENTO Y ORIENTACIÓN AL MARKETING INTERNO EN EL DESARROLLO DE VENTAJAS COMPETITIVAS EN EL SECTOR HOTELERO

    Directory of Open Access Journals (Sweden)

    Ruizalba Robledo, José Luis

    2015-05-01

    Full Text Available La orientación al marketing interno (OMI puede constituir una herramienta de gestión del conocimiento de los empleados que permita a las empresas desarrollar una ventaja competitiva en la medida en que genera información, la comunica internamente para terminar ofreciendo una respuesta a sus necesidades. La OMI, mediante la adecuada gestión del capital humano, facilita competir de forma más efectiva y dar una respuesta ágil a las demandas del mercado. En este estudio se analizan las 3 dimensiones que constituyen la OMI y que suponen una gestión del conocimiento en lo que se refiere a generación de inteligencia sobre las necesidades de los empleados, su comunicación y su posterior respuesta. A continuación se realiza una investigación empírica para analizar el grado de OMI en los hoteles españoles y en la que se identifica una clasificación de 3 grupos diferenciados según dichos niveles. Además, se evidencia a la OMI como fuente de ventaja competitiva, ya que se encuentran mayores niveles de satisfacción laboral y de compromiso organizacional en los grupos con mayor OMI.

  11. TECNOLOGÍA DE INFORMACIÓN Y VENTAJA COMPETITIVA: EL CASO DE LOS SISTEMAS ERP EN CHILE [doi: 10.5329/RECADM.20070601002

    Directory of Open Access Journals (Sweden)

    Patricio Ramírez C.

    2007-05-01

    Full Text Available Este trabajo presenta un examen de los factores que anteceden la integración exitosa de una tecnología de información, como son los sistemas ERP (Enterprise Resources Planning, y cuales de estos factores pueden generar una ventaja competitiva sostenible para la empresa. El análisis se basa en un estudio empírico que indagó el fenómeno de implantación exitosa de sistemas ERP en 72 grandes empresas chilenas y lo contrastó con un modelo de investigación propuesto por los autores, utilizando para estos efectos la técnica PLS (Partial Least Square de modelado de ecuaciones estructurales. Basados en el enfoque conceptual de la teoría de recursos y capacidades, los resultados de la investigación indican que el aprendizaje y la predisposición para el cambio (en conjunción con los otros factores antecedentes del éxito de un sistema ERP y del propio ERP pueden ser fuentes de una ventaja competitiva sostenible.

  12. Responsabilidad Social y ventaja competitiva: percepción de la gerencia de la empresa pequeña y mediana de Guadalajara, Jalisco

    Directory of Open Access Journals (Sweden)

    José Sánchez Gutiérrez

    2016-10-01

    Full Text Available El objetivo de este artículo es identificar la relación entre la Responsabilidad Social (RSE y la ventaja competitiva que establece el gerente de la empresa pequeña y mediana manufacturera. Mediante un trabajo de investigación mixto se recuperó y analizó la evidencia obtenida a través de 450 empresas manufactureras de la Zona metropolitana de Guadalajara. El principal informante fue el gerente a cargo de cada una de estas. El principal resultado es la asociación de la Responsabilidad Social Empresarial con la ventaja competitiva de forma independiente al desempeño financiero, la reducción de costos y el desempeño tecnológico. De esta misma forma, la gerencia percibe como un costo adicional a la RSE. La principal conclusión es que la adopción de la RSE es selectiva y simbólica en estas empresas.

  13. Logística Integral: Una alternativa para crear valor y ventajas competitivas en las pequeñas y medianas empresas (pymes del Sector Calzado

    Directory of Open Access Journals (Sweden)

    Francisco Javier Villarreal Segoviano

    2012-01-01

    Full Text Available En este documento se plantea la ventaja competitiva como el resultado que las empresas buscan lograr en un contexto global y de hipercompetitividad; para lograr esto se necesitan estrategias que impulsen esas ventajas competitivas en un ambiente cambiante y dinámico, una de estas estrategias es la logística integral, que busca el equilibrio de la estructura de la cadena de valor de negocio y lograr una interacción y operación eficiente de las áreas de una manera en que las actividades proyecten la creación de valor en las empresas pequeñas y medianas del sector calzado. Las operaciones de una empresa pequeña y mediana tienen un contexto particular en donde presentan ventajas y desventajas, que pueden consolidar o no a una empresa en el plano internacional; previo a esto se necesita plantear la aplicación de la Logística que impulse al cambio y a la consolidación de la creación de valor en el negocio. Se aplicaron sesenta (60 encuestas a empresas pyme adheridas a la cámara de calzado y con la base de datos de COFOCE (Coordinadora de Fomento al Comercio Exterior del Estado de Guanajuato, en donde además de aplicar la encuesta, se hacía un recorrido por las instalaciones y se platicaba de forma informal la realidad y contexto de la empresa, y que generaba también información cualitativa útil. Con ello, se pretendió conocer la realidad de las pequeñas y medianas empresas en León, Gto., identificar los aspectos necesarios para revertir esas desventajas identificadas, como la falta del desarrollo de una logística, la ausencia de planeación estratégica, aplicación de las tecnología de la información y comunicación, falta de competitividad internacional y la falta de creación de valor a lo largo de la cadena de valor del negocio.

  14. Ventajas competitivas: Una propuesta paso a paso de búsqueda y aplicación de cadena de valor adaptada a empresas aéreas. Caso Patagonia- Argentina

    OpenAIRE

    María Alejandra Gazzera

    2005-01-01

    El desarrollo del proceso de búsqueda de ventajas competitivas de una empresa se puede plantear como un esfuerzo que se sigue en tres grandes líneas de actuación: la búsqueda centrada en la empresa, centrada en el entorno, y centrada en los competidores. Si bien la búsqueda de ventajas competitivas está estrechamente interrelacionada y vinculada entre las tres líneas, el presente trabajo se centrará en la primera de ellas, es decir al interior de la empresa, sin perder de vista la rel...

  15. Radiation protection calculations for diagnostic medical equipment

    International Nuclear Information System (INIS)

    Klueter, R.

    1992-01-01

    The standards DIN 6812 and DIN 6844 define the radiation protection requirements to be met by biomedical radiography equipment or systems for nuclear medicine. The paper explains the use of a specific computer program for radiation protection calculations. The program offers menu-controlled calculation, with free choice of the relevant nuclides. (DG) [de

  16. Las capacidades de absorción del conocimiento como ventajas competitivas para la inserción de pymes en cadenas globales de valor

    Directory of Open Access Journals (Sweden)

    Jaime Olea-Miranda

    2016-01-01

    Full Text Available El propósito del estudio es identificar las capacidades de absorción del conocimiento como fuente de ven-tajas competitivas que potencializan en las pymes las posibilidades de integrarse a las cadenas globalesde valor. Para ello se realizó una revisión del estado del arte que fundamenta la propuesta de un modelobasado en 2 enfoques teóricos: el de sistemas de innovación y el de cadenas globales de valor. La imple-mentación se realizó en pymes del noroeste de México en los sectores de tecnologías de informacióny metalmecánica. Los resultados muestran que cuando las pymes locales son proveedoras de empresastransnacionales reciben transferencia de conocimientos que les permiten ingresar o mejorar su posiciónen las cadenas globales de valor.

  17. Las capacidades de absorción del conocimiento como ventajas competitivas para la inserción de pymes en cadenas globales de valor

    Directory of Open Access Journals (Sweden)

    Jaime Olea-Miranda

    2016-04-01

    Full Text Available El propósito del estudio es identificar las capacidades de absorción del conocimiento como fuente de ventajas competitivas que potencializan en las pymes las posibilidades de integrarse a las cadenas globales de valor. Para ello se realizó una revisión del estado del arte que fundamenta la propuesta de un modelo basado en 2 enfoques teóricos: el de sistemas de innovación y el de cadenas globales de valor. La implementación se realizó en pymes del noroeste de México en los sectores de tecnologías de información y metalmecánica. Los resultados muestran que cuando las pymes locales son proveedoras de empresas transnacionales reciben transferencia de conocimientos que les permiten ingresar o mejorar su posición en las cadenas globales de valor.

  18. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    The polymetallic nodules occur at an average depth of 4500 m. Adequate equipment and techniques are required for the exploration at such depths. Shipboard and various laboratory equipments for the sampling of polymetallic nodules is described...

  19. Remote handling equipment

    International Nuclear Information System (INIS)

    Clement, G.

    1984-01-01

    After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

  20. El territorio y su relación con las ventajas comparativas y competitivas en el municipio de La Unión, Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Magdalida Murgueitio

    2015-01-01

    Full Text Available En el marco del proyecto de investigación denominado “Marketing Territorial, una alternativa para la competitividad y posicionamiento regional en los municipios de La Unión, Zarzal y Cartago durante el periodo 2012-2013” el objetivo principal es identificar las alternativas que promuevan la competitividad y el posicionamiento regional en los municipios de La Unión, Zarzal y Cartago, en el Valle del Cauca. La problemática se aborda con la triangulación de métodos, datos e investigadores. Se obtienen datos con diferentes técnicas e instrumentos como la observación no participante, la opinión de los habitantes, entrevistas semiestructuradas a funcionarios públicos y recopilación de datos estadísticos de los municipios en diferentes rubros; además del análisis de un equipo de investigadores de disciplinas como la Economía, la Contaduría, la Administración, la Ingeniería de Sistemas y la Educación. Los resultados indican que el aprovechamiento de las ventajas comparativas que el territorio brinda, así como la educación, la infraestructura y el apoyo administrativo del gobierno departamen - tal juegan un papel importante en la potencialización de las ventajas competitivas del municipio. Se concluye que el marketing territorial es una herramienta para impulsar la competitividad, la cual se potencializa cuando existe la voluntad política de invertir en ella y de gestionarla.

  1. Exercise Equipment: Neutral Buoyancy

    Science.gov (United States)

    Shackelford, Linda; Valle, Paul

    2016-01-01

    Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

  2. BP volume reduction equipment

    International Nuclear Information System (INIS)

    Kitamura, Yoshinori; Muroo, Yoji; Hamanaka, Isao

    2003-01-01

    A new type of burnable poison (BP) volume reduction system is currently being developed. Many BP rods, a subcomponent of spent fuel assemblies are discharged from nuclear power reactors. This new system reduces the overall volume of BP rods. The main system consists of BP rod cutting equipment, equipment for the recovery of BP cut pieces, and special transport equipment for the cut rods. The equipment is all operated by hydraulic press cylinders in water to reduce operator exposure to radioactivity. (author)

  3. Procedures for the definitive calibration of radiotherapy equipment

    International Nuclear Information System (INIS)

    1993-01-01

    Recommendations from the Institute of Physical Sciences in Medicine are given for the definition calibration of external beam radiotherapy treatment machines and radiation dose measuring equipment used in radiotherapy. (UK)

  4. Robotics in medicine

    Science.gov (United States)

    Kuznetsov, D. N.; Syryamkin, V. I.

    2015-11-01

    Modern technologies play a very important role in our lives. It is hard to imagine how people can get along without personal computers, and companies - without powerful computer centers. Nowadays, many devices make modern medicine more effective. Medicine is developing constantly, so introduction of robots in this sector is a very promising activity. Advances in technology have influenced medicine greatly. Robotic surgery is now actively developing worldwide. Scientists have been carrying out research and practical attempts to create robotic surgeons for more than 20 years, since the mid-80s of the last century. Robotic assistants play an important role in modern medicine. This industry is new enough and is at the early stage of development; despite this, some developments already have worldwide application; they function successfully and bring invaluable help to employees of medical institutions. Today, doctors can perform operations that seemed impossible a few years ago. Such progress in medicine is due to many factors. First, modern operating rooms are equipped with up-to-date equipment, allowing doctors to make operations more accurately and with less risk to the patient. Second, technology has enabled to improve the quality of doctors' training. Various types of robots exist now: assistants, military robots, space, household and medical, of course. Further, we should make a detailed analysis of existing types of robots and their application. The purpose of the article is to illustrate the most popular types of robots used in medicine.

  5. Electrical equipment qualification

    International Nuclear Information System (INIS)

    Farmer, W.S.

    1983-01-01

    Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

  6. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  7. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  8. Caracterización de la utilización de innovación en el sector bancario: Una aproximación hacia la adquisición de ventajas competitivas

    OpenAIRE

    Herazo Villa, Jesús Alejandro; Restrepo Ramírez, Susana; Yi Forero, Alex Daniel

    2013-01-01

    Investigación exploratoria mixta siguiendo un método deductivo con la que se logró caracterizar el grado de utilización de innovación en el sector bancario y su utilidad en la adquisición de ventajas competitivas con la ayuda de del modelo del Radar de Innovación.

  9. Aerospace Medicine

    Science.gov (United States)

    Michaud, Vince

    2015-01-01

    NASA Aerospace Medicine overview - Aerospace Medicine is that specialty area of medicine concerned with the determination and maintenance of the health, safety, and performance of those who fly in the air or in space.

  10. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  11. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  12. Data communication equipment

    International Nuclear Information System (INIS)

    Kim, Hak Seon; Lee, Sang Mok

    1998-02-01

    The contents of this book are introduction of data communication on definition, purpose and history, information terminal about data communication system and data transmission system, data transmit equipment of summary, transmission cable, data port, concentrator and front-end processor, audio communication equipment like phones, radio communication equipment of summary on foundation of electromagnetic waves, AM transmitter, AM receiver, FM receiver and FM transmitter, a satellite and mobile communication equipment such as earth station, TT and C and Cellular phone, video telephone and new media apparatus.

  13. Influencia de la carrera investigadora en la productividad e impacto de los investigadores españoles. El papel de la ventaja acumulativa

    Directory of Open Access Journals (Sweden)

    García-Romero, Antonio

    2012-03-01

    Full Text Available Careers in research can have a significant effect on the chances of scientists’ success. This effect, also known as cumulative advantage, contributes to skewing the unequal distribution of both production and impact among scientists. This paper focuses on determining whether the cumulative advantage is present within a sample of 174 Spanish scientists doing research in four major areas (i.e.: physics, chemistry, biology and biochemistry. In order to determine the impact of their careers in research, we specify a multi-equational model. Among other variables, we include those related with their doctoral training, the postdoctoral period and the quality of the departments where scientists are hired after they finish their post doctoral work. Moreover, the model includes a group of hypotheses gathered from a survey of the literature on this topic. The model is based on the Path Analysis technique. We also have developed a method to determine the quality of academic departments using a single scale suitable for any country and discipline. The main result confirms the existence of cumulative advantage being the predoctoral productivity the main determinant of productivity during the ten years after obtaining the doctor degree. Finally, a bias in productivity and impact in favour of men is observed.

    La carrera investigadora puede tener un efecto relevante sobre las opciones de éxito profesional de los investigadores. Dicho efecto, conocido como ventaja acumulativa, contribuiría a agudizar la desigual distribución de la productividad y el impacto entre los investigadores. Este trabajo se centra en determinar la presencia de ventaja acumulativa en una muestra de 174 investigadores españoles de cuatro áreas de conocimiento (Física, Química, Biología y Bioquímica. Para contrastar el efecto de la carrera investigadora se especifica un modelo multiecuacional que incluye variables sobre la formación pre y posdoctoral así como con los

  14. Técnicas moleculares para la detección e identificación de patógenos en alimentos: ventajas y limitaciones

    Directory of Open Access Journals (Sweden)

    Carolina Palomino-Camargo

    2014-09-01

    Full Text Available Las enfermedades transmitidas por alimentos, ocasionadas por microorganismos patógenos, constituyen un grave problema de salud pública a nivel mundial. Los métodos microbiológicos utilizados comúnmente en la detección de estos patógenos, de origen alimentario, son laboriosos y consume mucho tiempo. Esta situación, aunada a la demanda por resultados inmediatos y a los avances tecnológicos, ha conducido al desarrollo de una amplia gama de métodos rápidos en las últimas décadas. En base a esto, la presente revisión describe las ventajas y limitaciones de los principales métodos moleculares utilizados en la detección e identificación de microorganismos patógenos transmitidos por alimentos. Para ello, se consideró la actualidad de la información consultada, el análisis objetivo de la temática y su alcance. La literatura reciente reporta un número significativo de técnicas moleculares, alternativas, sensibles y selectivas para la detección, enumeración e identificación de microorganismos patógenos en alimentos, siendo la reacción en cadena de la polimerasa (PCR la plataforma más popular, mientras que la secuenciación de alto rendimiento se perfila como una técnica de gran aplicabilidad a futuro. Sin embargo, aun con todas las ventajas que ofrecen estas novedosas metodologías, no se deben pasar por alto sus limitaciones. Así, por ejemplo, los métodos moleculares no constituyen protocolos estandarizados, lo que dificulta su utilización en algunos casos. Por esta razón se debe trabajar arduamente para superar tales limitaciones y mejorar la aplicación de estas técnicas en matrices tan complejas como los sistemas alimenticios.

  15. Nuclear Medicine in Turkey

    International Nuclear Information System (INIS)

    Durak, H.

    2001-01-01

    Nuclear Medicine is a medical specialty that uses radionuclides for the diagnosis and treatment of diseases and it is one of the most important peaceful applications of nuclear sciences. Nuclear Medicine has a short history both in Turkey and in the world. The first use of I-131 for the treatment of thyrotoxicosis in Turkey was in 1958 at the Istanbul University Cerrahpasa Medical School. In 1962, Radiobiological Institute in Ankara University Medical School was established equipped with well-type counters, radiometers, scalers, external counters and a rectilinear scanner. In 1965, multi-probe external detection systems, color dot scanners and in 1967, anger scintillation camera had arrived. In 1962, wet lab procedures and organ scanning, in 1965 color dot scanning, dynamic studies (blood flow - renograms) and in 1967 analogue scintillation camera and dynamic camera studies have started. In 1974, nuclear medicine was established as independent medical specialty. Nuclear medicine departments have started to get established in 1978. In 1974, The Turkish Society of Nuclear Medicine (TSNM) was established with 10 members. The first president of TSNM was Prof. Dr. Yavuz Renda. Now, in the year 2000, TSNM has 349 members. Turkish Society of Nuclear Medicine is a member of European Association of Nuclear Medicine (EANM), World Federation of Nuclear Medicine and Biology (WFNMB) and WFNMB Asia-Oceania. Since 1974, TSNM has organized 13 national Nuclear Medicine congresses, 4 international Nuclear Oncology congresses and 13 nuclear medicine symposiums. In 1-5 October 2000, 'The VII th Asia and Oceania Congress of Nuclear Medicine and Biology' was held in Istanbul, Turkey. Since 1992, Turkish Journal of Nuclear Medicine is published quarterly and it is the official publication of TSNM. There are a total of 112 Nuclear Medicine centers in Turkey. There are 146 gamma cameras. (52 Siemens, 35 GE, 16 Elscint, 14 Toshiba, 10 Sopha, 12 MIE, 8 Philips, 9 Others) Two cyclotrons are

  16. Nuclear medicine

    International Nuclear Information System (INIS)

    Lentle, B.C.

    1986-01-01

    Several growth areas for nuclear medicine were defined. Among them were: cardiac nuclear medicine, neuro-psychiatric nuclear medicine, and cancer diagnosis through direct tumor imaging. A powerful new tool, Positron Emission Tomography (PET) was lauded as the impetus for new developments in nuclear medicine. The political environment (funding, degree of autonomy) was discussed, as were the economic and scientific environments

  17. Heart failure - medicines

    Science.gov (United States)

    CHF - medicines; Congestive heart failure - medicines; Cardiomyopathy - medicines; HF - medicines ... You will need to take most of your heart failure medicines every day. Some medicines are taken ...

  18. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  19. Capital Equipment Replacement Decisions

    OpenAIRE

    Batterham, Robert L.; Fraser, K.I.

    1995-01-01

    This paper reviews the literature on the optimal replacement of capital equipment, especially farm machinery. It also considers the influence of taxation and capital rationing on replacement decisions. It concludes that special taxation provisions such as accelerated depreciation and investment allowances are unlikely to greatly influence farmers' capital equipment replacement decisions in Australia.

  20. Competitividad y ventajas competitivas: revisión teórica y ejercicio de aplicación a 30 ciudades de México

    Directory of Open Access Journals (Sweden)

    Luis Jaime Sobrino

    2002-01-01

    Full Text Available Las teorías tradicionales del comercio exterior no son capaces de explicar la evolución del intercambio comercial derivado del proceso de globalización, por lo que se han desarrollado nuevas vetas explicativas, algunas de las cuales han enfatizado los conceptos de competencia y competitividad. De manera colateral, el tratamiento teórico del crecimiento económico local ha ido adoptando los nuevos arquetipos de la teoría del comercio internacional. El propósito del presente artículo es discutir las principales aportaciones que han pugnado por explicar el significado de competencia y competitividad en la escala empresarial, de país y de ciudad, así como los distintos postulados sobre los determinantes de la competitividad territorial o ventajas competitivas. La revisión de conceptos se complementa con una propuesta conceptual y operativa de los determinantes explicativos de la competitividad local y un ejercicio exploratorio de aplicación empírica sobre la competitividad industrial en 30 ciudades del país.

  1. La duración en el poder y el rendimiento electoral de los partidos nacionalistas gobernantes: ¿la ventaja competitiva del nacionalismo?

    Directory of Open Access Journals (Sweden)

    Sonia Alonso

    2008-01-01

    Full Text Available Este trabajo se pregunta si el hecho de apelar a identidades supuestamente primordiales, y por tanto fuertemente arraigadas y estables, ha aportado a los partidos nacionalistas alguna ventaja competitiva a lo largo del tiempo frente a otros partidos políticos basados en otras identidades, como las de clase o las religiosas. Para ello, el trabajo compara los partidos nacionalistas y no nacionalistas de los gobiernos regionales de Canadá, Dinamarca, España, Italia y Reino Unido, centrándose en tres indicadores empíricos: el rendimiento electoral, la fluctuación de los niveles de voto y la duración de los partidos gobernantes en el gobierno. Los resultados muestran que los partidos no nacionalistas son, en general, más severamente castigados que los partidos nacionalistas, especialmente en gobiernos de coalición. En términos de duración en el gobierno, sin embargo, no se aprecian diferencias significativas entre los partidos nacionalistas y los que no lo son.

  2. [Current Situation and Prospects of Emergency Medical Equipment in Our Country].

    Science.gov (United States)

    Qi, Lijing; Cheng, Feng

    2016-03-01

    This article analyzes the new demand of emergency medical equipment in the current development trend based on the analysis of the development and current situation of emergency medicine in our country. At the same time it introduces the current industrial characteristics of our country. Finally it analyzes the development trend of this kind of equipment in the new emergency medicine field.

  3. HVAC systems and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, S.T. (Linford Air and Refrigeration Company, Oakland, CA (US))

    1990-02-01

    The author discusses the section of the ASHRAE Standard 90.1-1989 which addresses HVAC systems and equipment. New features of HVAC systems mandatory general requirements are described. New prescriptive requirements are detailed.

  4. Personal Protective Equipment

    National Research Council Canada - National Science Library

    1998-01-01

    ... of personal protective equipment A safety program for new employees is a necessary part of any orientation program An on-going safety program should be used to motivate employees to continue to use...

  5. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  6. CV equipment responsibilities

    CERN Document Server

    Pirollet, B

    2008-01-01

    This document describes the limits of the responsibilities of the TS/CV for fire fighting equipment at the LHC. The various interfaces, providers and users of the water supply systems and clean water raising systems are described.

  7. Equipment for hydraulic testing

    International Nuclear Information System (INIS)

    Jacobsson, L.; Norlander, H.

    1981-07-01

    Hydraulic testing in boreholes is one major task of the hydrogeological program in the Stripa Project. A new testing equipment for this purpose was constructed. It consists of a downhole part and a surface part. The downhole part consists of two packers enclosing two test-sections when inflated; one between the packers and one between the bottom packer and the bottom of the borehole. A probe for downhole electronics is also included in the downhole equipment together with electrical cable and nylon tubing. In order to perform shut-in and pulse tests with high accuracy a surface controlled downhole valve was constructed. The surface equipment consists of the data acquisition system, transducer amplifier and surface gauges. In the report detailed descriptions of each component in the whole testing equipment are given. (Auth.)

  8. ¿Hacia dónde va la ventaja competitiva?: Un modelo de gestión que incorpora a las personas como elemento clave de la estrategia empresarial

    Directory of Open Access Journals (Sweden)

    Emilio García Vega

    2009-06-01

    Full Text Available El concepto de ventaja competitiva ha evolucionado de manera acelerada en los últimos años. Algunos académicos y ejecutivos sostienen que las personas son el elemento fundamental para la construcción de la misma. En esta línea, la gestión de las empresas ha mostrado una inclinación hacia el manejo de los recursos humanos –denominados también «talentos» – como elemento clave de su éxito organizacional. En este trayecto, las ideas, los paradigmas y las concepciones se han modificado de manera interesante. Este texto trata de plantear estas nuevas concepciones frente al reto de gestionar una organización, y propone un modelo de gestión basado en la importancia de las personas en la administración de la ventaja competitiva.

  9. Diabetes Medicines

    Science.gov (United States)

    Diabetes means your blood glucose, or blood sugar, levels are too high. If you can't control your diabetes with wise food choices and physical activity, you may need diabetes medicines. The kind of medicine you take depends ...

  10. Herbal Medicine

    Science.gov (United States)

    ... used for its scent, flavor, or therapeutic properties. Herbal medicines are one type of dietary supplement. They are ... extracts, and fresh or dried plants. People use herbal medicines to try to maintain or improve their health. ...

  11. Nigerian Journal of Medicine: Editorial Policies

    African Journals Online (AJOL)

    illuminates medical science or practice extending to all aspects of medicine. The NJM offers the greatest opportunity to manufacturers and marketers of drugs, medical equipment and consumables to reach over eighty percent of all doctors and ...

  12. Folk Medicine

    Science.gov (United States)

    ... lead’s effects on health. How to tell if herbal medicines or folk medicines contain lead You only can ... as high as 90%. Ghasard, an Indian folk medicine, has also been found to contain lead. It is a brown powder used as a tonic. Ba-baw-san is a Chinese herbal remedy that contains lead. It is used to ...

  13. Equipment abnormality monitoring device

    International Nuclear Information System (INIS)

    Ando, Yasumasa

    1991-01-01

    When an operator hears sounds in a plantsite, the operator compares normal sounds of equipment which he previously heard and remembered with sounds he actually hears, to judge if they are normal or abnormal. According to the method, there is a worry that abnormal conditions can not be appropriately judged in a case where the number of objective equipments is increased and in a case that the sounds are changed gradually slightly. Then, the device of the present invention comprises a plurality of monitors for monitoring the operation sound of equipments, a recording/reproducing device for recording and reproducing the signals, a selection device for selecting the reproducing signals among the recorded signals, an acoustic device for converting the signals to sounds, a switching device for switching the signals to be transmitted to the acoustic device between to signals of the monitor and the recording/reproducing signals. The abnormality of the equipments can be determined easily by comparing the sounds representing the operation conditions of equipments for controlling the plant operation and the sounds recorded in their normal conditions. (N.H.)

  14. Prioritizing equipment for replacement.

    Science.gov (United States)

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  15. Radioactive decontamination of equipment

    International Nuclear Information System (INIS)

    1982-03-01

    After a recall of some definitions relating to decontamination techniques and of the regulation into effect, the principles to be respected to arrange rationally work zones are quoted while insisting more particularly on the types of coatings which facilitate maintenance operations and the dismantling of these installations. Then, the processes and equipments to use in decontamination units for routine or particular operations are described; the list of recommended chemical products to decontaminate the equipment is given. The influence of these treatments on the state and the duration of life of equipments is studied, and some perfectible methods are quoted. In the appendix, are given: the limits of surface contamination accepted in the centers; a standard project which defines the criteria of admissible residual contamination in wastes considered as cold wastes; some remarks on the interest that certain special ventilation and air curtain devices for the protection of operators working on apparatus generating contaminated dusts [fr

  16. Use Medicines Safely

    Science.gov (United States)

    ... Prescription Medicines 1 of 7 sections The Basics: Prescription Medicines There are different types of medicine. The 2 ... medicine are prescription and over-the-counter (OTC). Prescription medicines Prescription medicines are medicines you can get only ...

  17. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  18. Charging equipment. Ladegeraet

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, E

    1981-09-17

    The invention refers to a charging equipment, particularly on board charging equipment for charging traction batteries of an electric vehicle from the AC mains supply, consisting of a DC converter, which contains a controlled power transistor, a switching off unloading circuit and a power transmitter, where the secondary winding is connected in series with a rectifier diode, and a smoothing capacitor is connected in parallel with this series circuit. A converter module is provided, which consists of two DC voltage converters, whose power transistors are controlled by a control circuit in opposition with a phase displacement of 180/sup 0/.

  19. Single-purpose nuclear medicine instruments

    International Nuclear Information System (INIS)

    Boucek, J.

    Nuclear medicine requires the most up-to-date specialized technical facilities. The paper underlines the factor of reliability in purpose-designed equipment used for basic examinations. The possibility is also discussed of the automation of standard nuclear medicine instruments

  20. Experimental equipment, ch. 6

    International Nuclear Information System (INIS)

    Boomstra, F.; Hoogenboom, A.M.; Prins, C.M.; Strasters, B.A.; Vermeer, A.; Wit, P. de; Zwol, N.A. van.

    1977-01-01

    The experimental equipment in use at Utrecht university is discussed. Attention is paid to the tandem Van de Graaff accelerator and the 4MV and 1MV accelerators. The detection systems for gamma-ray spectroscopy are reviewed with emphasis on the compton-suppression spectrometer. The data-handling system used for experiments with the tandem is also briefly discussed

  1. Equipment gift to Monaco

    International Nuclear Information System (INIS)

    1970-01-01

    Research work at the Agency's Laboratory of Marine Radioactivity in Monaco, including that concerned with pollution of the sea, has been made more effective by its latest acquisition of equipment. This is a spectrophotometer donated by the Federal Republic of Germany. (author)

  2. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  3. Safeguards techniques and equipment

    International Nuclear Information System (INIS)

    1997-01-01

    The current booklet is intended to give a full and balanced description of the techniques and equipment used for both nuclear material accountancy and containment and surveillance measures, and for the new safeguards measure of environmental sampling. As new verification measures continue to be developed, the material in the booklet will be periodically reviewed and updated versions issued. (author)

  4. Equipping tomorrow's fire manager

    Science.gov (United States)

    Christopher A. Dicus

    2008-01-01

    Fire managers are challenged with an ever-increasing array of both responsibilities and critics. As in the past, fire managers must master the elements of fire behavior and ecology using the latest technologies. In addition, today’s managers must be equipped with the skills necessary to understand and liaise with a burgeoning group of vocal stakeholders while also...

  5. Electrical equipment design library

    International Nuclear Information System (INIS)

    1994-01-01

    This book guides the design supervision, construction order for electrical equipment. The contents of this library are let's use electricity like this, leading-in-pole and casual power, electric pole install below 300KVA, electric pole install below 301∼1000KVA, electric pole install exceed 1000KVA, rooftop install exceed 1000KVA, CUBICLE type, 154KV services. It adds an appendix.

  6. Orphee reactor experimental equipment

    International Nuclear Information System (INIS)

    1987-01-01

    Experimental equipment around the ORPHEE reactor is presented. The neutron source; and the spectrometers and sample environment (inelastic and quasi-elastic scattering, elastic scattering, spread scattering, small angle scattering) are described. An experiment proposal and reports guide is supplied [fr

  7. Seismic qualification of equipment

    International Nuclear Information System (INIS)

    Heidebrecht, A.C.; Tso, W.K.

    1983-03-01

    This report describes the results of an investigation into the seismic qualification of equipment located in CANDU nuclear power plants. It is particularly concerned with the evaluation of current seismic qualification requirements, the development of a suitable methodology for the seismic qualification of safety systems, and the evaluation of seismic qualification analysis and testing procedures

  8. Underground coal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, J.

    2002-12-01

    This paper reports on increasing automation and enhanced productivity on longwalls, new development cutting and bolting technologies and haulage systems. Amongst equipment discussed is DBT's Electra series EL3000 shearer, the Dosco LH1400 roadheader with onboard bolters, and Joy 12 CM30 continuous miners. 4 photos.

  9. Nuclear medicine

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, S M [Bhabha Atomic Research Centre, Bombay (India). Radiation Medicine Centre

    1967-01-01

    The article deals with the growth of nuclear medicine in India. Radiopharmaceuticals both in elemental form and radiolabelled compounds became commercially available in India in 1961. Objectives and educational efforts of the Radiation Medicine Centre setup in Bombay are mentioned. In vivo tests of nuclear medicine such as imaging procedures, dynamic studies, dilution studies, thyroid function studies, renal function studies, linear function studies, blood flow, and absorption studies are reported. Techniques of radioimmunoassay are also mentioned.

  10. Equipment for nuclear medical centers, production capabilities of Rosatom enterprises

    International Nuclear Information System (INIS)

    Gavrish, Yu. N.; Koloskov, S. A.; Smirnov, V. P.; Strokach, A. P.

    2015-01-01

    Analysis of the capabilities of the State Corporation Rosatom enterprises on the development and production of diagnostic and therapeutic equipment for nuclear medicine centers is presented. Prospects of the development of accelerator equipment for the production of a wide range of radioisotope products are shown, and the trends of its development are determined. A comparative analysis of the technical parameters of domestic tomographs and devices for brachytherapy with foreign counterparts is given

  11. Equipment for nuclear medical centers, production capabilities of Rosatom enterprises

    Science.gov (United States)

    Gavrish, Yu. N.; Koloskov, S. A.; Smirnov, V. P.; Strokach, A. P.

    2015-12-01

    Analysis of the capabilities of the State Corporation Rosatom enterprises on the development and production of diagnostic and therapeutic equipment for nuclear medicine centers is presented. Prospects of the development of accelerator equipment for the production of a wide range of radioisotope products are shown, and the trends of its development are determined. A comparative analysis of the technical parameters of domestic tomographs and devices for brachytherapy with foreign counterparts is given.

  12. Ventajas del análisis Wavelet sobre el análisis de Fourier para la interpretación del ruido electroquímico

    Directory of Open Access Journals (Sweden)

    Espada, L.

    2003-12-01

    Full Text Available Given its simplicity and low cost compared to other types of methodologies, the measurement and interpretation of Electrochemical Noise, is consolidating itself as one of the analysis methods most frequently used for the interpretation of corrosion. As the technique is still evolving, standard treatment methodologies for data retrieved in experiments do not exist yet. To date, statistical analysis and the Fourier analysis are commonly used in order to establish the parameters that may characterize the recordings of potential and current electrochemical noise. This study introduces a new methodology based on wavelet analysis and presents its advantages with regards to the Fourier analysis in distinguishing periodical and non-periodical variations in the signal power in time and frequency, as opposed to the Fourier analysis that only considerers the frequency.

    Por su sencillez y bajo coste frente a otros tipos de metodologías, la medida e interpretación del Ruido Electroquímico, REQ, se está consolidando como uno de los métodos de análisis más utilizados para la interpretación del fenómeno de la corrosión. Al ser una técnica en desarrollo, no existen todavía metodologías estandarizadas de tratamiento de los datos obtenidos en los experimentos. Hasta la fecha, se suelen utilizar el análisis estadístico y el análisis de Fourier para establecer parámetros que puedan caracterizar a los registros de ruido electroquímico de potencial e intensidad. En este trabajo se introduce una nueva metodología basada en el análisis Wavelet que presenta las ventajas, respecto del análisis de Fourier, de poder distinguir variaciones periódicas y no periódicas de la potencia de la señal tanto en el dominio del tiempo, como en el de la frecuencia, y no sólo en el dominio de la frecuencia como ocurre en el caso del análisis de Fourier.

  13. Ventajas de la perforación direccional: revisión y aplicación en el Oriente Ecuatoriano

    Directory of Open Access Journals (Sweden)

    Darío Cedeño Macías

    2017-05-01

    Full Text Available El avance evolutivo que ha tenido la industria hidrocarburífera a nivel mundial, específicamente en las operaciones de extracción y producción, requieren métodos más precisos y rigurosos para llevar a cabo su cometido, considerando principalmente la relación costo beneficio. Para ello es imperativo desarrollar tecnologías y sistemas de manera paralela a dicha evolución. El objetivo de este trabajo es presentar una revisión actualizada de los aspectos esenciales de la perforación direccional, con énfasis en sus evidentes ventajas respecto a la perforación vertical o convencional, y sobre todo su impacto en la reducción de costos para la industria petrolera. De manera que el nivel académico trabaje estrechamente con el nivel profesional, teniendo como parte medular el análisis de datos de ingeniería de diseño en los sistemas de perforación direccional rotativos y su impacto en la reducción de costos operativos en el proceso de extracción de hidrocarburos. Se presentan y discuten los resultados del desempeño alcanzado por estas herramientas en el campo.   Abstract The evolutionary advance of the hydrocarbon industry worldwide, specifically in the extraction and production operations, requires more precise and rigorous methods to carry out its mission, considering mainly the cost benefit relation. To do this, it is imperative to develop technologies and systems in parallel with this evolution. The objective of this work is to present an updated review of the essential aspects of directional drilling, with emphasis on its obvious advantages over vertical or conventional drilling, and especially its impact on reducing costs for the oil industry. So that the academic level works closely with the professional level, having as a core part the analysis of design engineering data in rotary directional drilling systems and its impact on the reduction of operating costs in the hydrocarbon extraction process. The results of the

  14. Visual communication and terminal equipment

    International Nuclear Information System (INIS)

    Kang, Cheol Hui

    1988-06-01

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  15. Visual communication and terminal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Cheol Hui

    1988-06-15

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  16. Vulnerable Medicine

    Science.gov (United States)

    Bochner, Arthur P.

    2009-01-01

    In "Narrative Medicine: Honoring the Stories of Illness," Rita Charon paints an original and humane portrait of what it can mean to be a doctor, to live a life immersed in sickness and dedicated to wellness. Charon drops the veil, inviting readers to look at the secret, subjective, emotional face of medicine, a zone of self-censored feelings and…

  17. Medicinal claims

    NARCIS (Netherlands)

    Meulen, van der Bernd

    2017-01-01

    Under EU medicinal law, substances presented as having properties for treating or preventing disease are medicinal products by virtue of their presentation. EU food law prohibits attributing to any food the property of preventing, treating or curing a disease. However, if certain conditions are

  18. [Evolutionary medicine].

    Science.gov (United States)

    Wjst, M

    2013-12-01

    Evolutionary medicine allows new insights into long standing medical problems. Are we "really stoneagers on the fast lane"? This insight might have enormous consequences and will allow new answers that could never been provided by traditional anthropology. Only now this is made possible using data from molecular medicine and systems biology. Thereby evolutionary medicine takes a leap from a merely theoretical discipline to practical fields - reproductive, nutritional and preventive medicine, as well as microbiology, immunology and psychiatry. Evolutionary medicine is not another "just so story" but a serious candidate for the medical curriculum providing a universal understanding of health and disease based on our biological origin. © Georg Thieme Verlag KG Stuttgart · New York.

  19. Equipment cost optimization

    International Nuclear Information System (INIS)

    Ribeiro, E.M.; Farias, M.A.; Dreyer, S.R.B.

    1995-01-01

    Considering the importance of the cost of material and equipment in the overall cost profile of an oil company, which in the case of Petrobras, represents approximately 23% of the total operational cost or 10% of the sales, an organization for the optimization of such costs has been established within Petrobras. Programs are developed aiming at: optimization of life-cycle cost of material and equipment; optimization of industrial processes costs through material development. This paper describes the methodology used in the management of the development programs and presents some examples of concluded and ongoing programs, which are conducted in permanent cooperation with suppliers, technical laboratories and research institutions and have been showing relevant results

  20. X-ray equipment

    International Nuclear Information System (INIS)

    Redmayne, I.G.B.

    1988-01-01

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.)

  1. X-ray equipment

    Energy Technology Data Exchange (ETDEWEB)

    Redmayne, I.G.B.

    1988-01-06

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.).

  2. Tube for irradiation equipment

    International Nuclear Information System (INIS)

    Goehrich, K.; Vogt, H.

    1979-01-01

    This patent describes a tube for irradiation equipment for limiting an emergent beam, with a baseplate, possessing a central aperture, intended for attaching to the equipment, as well as four carrier plates, each of which possesses a limiting edge and a sliding edge located at right angles thereto. The carrier plates are located parallel to the baseplate, the limiting edge of each carrier plate resting against the sliding edge of the adjacent carrier plate and each of the two mutually opposite pairs of carrier plates being displaceable, parallel to the direction of its sliding edges and symmetrically to the center of the transmission aperture, for the purpose of continuously varying the transmission aperture defined by the limiting edges, during which displacement each of the displaced carrier plates carries with it the carrier plate, resting against the limiting edge of the former plate, parallel to the direction of the limiting edge of the latter plate. 8 claims

  3. Equipment for isotope diagnostics

    International Nuclear Information System (INIS)

    Platz, W.

    1976-01-01

    The invention concerns an improvement of equipment for isotope diagnostics allowing to mark special intensity ranges of the recorded measurements by means of different colors. For undisturbed operation it is of advantage to avoid electric circuits between movable and unmovable parts of the color recorder. According to the invention, long gear wheels of glass fiber-reinforced polyamide are used for these connections. (ORU) [de

  4. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  5. Labelling of equipment dispensers.

    Science.gov (United States)

    Gray, D C

    1993-01-01

    A new labelling system for use on medical equipment dispensers is tested. This system uses one of the objects stored in each unit of the dispenser as the 'label', by attaching it to the front of the dispenser with tape. The new system was compared to conventional written labelling by timing subjects asked to select items from two dispensers. The new system was 27% quicker than the conventional system. Images Fig. 1 PMID:8110335

  6. Nuclear medicine

    International Nuclear Information System (INIS)

    Kand, Purushottam

    2012-01-01

    Nuclear medicine is a specialized area of radiology that uses very small amounts of radioactive materials to examine organ function and structure. Nuclear medicine is older than CT, ultrasound and MRI. It was first used in patients over 60-70 years ago. Today it is an established medical specialty and offers procedures that are essential in many medical specialities like nephrology, pediatrics, cardiology, psychiatry, endocrinology and oncology. Nuclear medicine refers to medicine (a pharmaceutical) that is attached to a small quantity of radioactive material (a radioisotope). This combination is called a radiopharmaceutical. There are many radiopharmaceuticals like DTPA, DMSA, HIDA, MIBI and MDP available to study different parts of the body like kidneys, heart and bones etc. Nuclear medicine uses radiation coming from inside a patient's body where as conventional radiology exposes patients to radiation from outside the body. Thus nuclear imaging study is a physiological imaging, whereas diagnostic radiology is anatomical imaging. It combines many different disciplines like chemistry, physics mathematics, computer technology, and medicine. It helps in diagnosis and to treat abnormalities very early in the progression of a disease. The information provides a quick and accurate diagnosis of wide range of conditions and diseases in a person of any age. These tests are painless and most scans expose patients to only minimal and safe amounts of radiation. The amount of radiation received from a nuclear medicine procedure is comparable to, or often many times less than, that of a diagnostic X-ray. Nuclear medicine provides an effective means of examining whether some tissues/organs are functioning properly. Therapy using nuclear medicine in an effective, safe and relatively inexpensive way of controlling and in some cases eliminating, conditions such as overactive thyroid, thyroid cancer and arthritis. Nuclear medicine imaging is unique because it provides doctors with

  7. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  8. Personal protective equipment

    International Nuclear Information System (INIS)

    2004-01-01

    This Practical Radiation Technical Manual is one of a series that has been designed to provide guidance on radiological protection for employers, radiation protection officers, managers and other technically competent persons who have responsibility for ensuring the safety of employees working with ionizing radiation. The Manual may be used with the appropriate IAEA Practical Radiation Safety Manuals to provide training, instruction and information for all employees engaged in work with ionizing radiation. Personal protective equipment (PPE) includes clothing or other special equipment that is issued to individual workers to provide protection against actual or potential exposure to ionizing radiations. It is used to protect each worker against the prevailing risk of external or internal exposure in circumstances in which it is not reasonably practicable to provide complete protection by means of engineering controls or administrative methods. Adequate personal protection depends on PPE being correctly selected, fitted and maintained. Appropriate training for the users and arrangements to monitor usage are also necessary to ensure that PPE provides the intended degree of protection effectively. This Manual explains the principal types of PPE, including protective clothing and respiratory protective equipment (RPE). Examples of working procedures are also described to indicate how PPE should be used within a safe system of work. The Manual will be of most benefit if it forms part of a more comprehensive training programme or is supplemented by the advice of a qualified expert in radiation protection. Some of the RPE described in this Manual should be used under the guidance of a qualified expert

  9. ER-E3 regulation. Minimal instrumentation that must operate nuclear medicine in Cuba

    International Nuclear Information System (INIS)

    2015-01-01

    The purpose of this regulation is to define the instrumentation that must exist in any institution conducting the practice of nuclear medicine in Cuba. This regulation emphasizes two aspects: The minimum equipment necessary to operate a nuclear medicine laboratory for use 'in vitro' and the minimum equipment required to operate a Nuclear Medicine use 'in vivo'

  10. Ventajas competitivas: Una propuesta paso a paso de búsqueda y aplicación de cadena de valor adaptada a empresas aéreas. Caso Patagonia- Argentina

    Directory of Open Access Journals (Sweden)

    María Alejandra Gazzera

    2005-05-01

    Full Text Available El desarrollo del proceso de búsqueda de ventajas competitivas de una empresa se puede plantear como un esfuerzo que se sigue en tres grandes líneas de actuación: la búsqueda centrada en la empresa, centrada en el entorno, y centrada en los competidores. Si bien la búsqueda de ventajas competitivas está estrechamente interrelacionada y vinculada entre las tres líneas, el presente trabajo se centrará en la primera de ellas, es decir al interior de la empresa, sin perder de vista la relación que tienen las empresas con su entorno o mercado, mediante la aplicación de la cadena de valor de Michael Porter (1985 adaptada a las empresas aéreas que operaban desde y hacia la ciudad de Neuquen, puerta de entrada a la Patagonia Argentina Es necesario destacar que no existen al presente, año 2005, estudios de este tipo en el sector mencionado en Argentina, pero en otros sectores productivos y aún en empresas aéreas de otros países, la cadena de valor ha demostrado su utilidad como tecnología de reflexión estratégica para generar valor en el cliente y para dirigir los esfuerzos de la empresa hacia la consolidación o creación de ventajas competitivas sostenibles en el tiempo.

  11. Uso de tecnologías de información y comunicación para la negociación internacional ¿ventaja para las empresas colombianas?

    OpenAIRE

    Baena Rojas, José Jaime; Cano Arenas, José Alejandro; Jarrin Quintero, Jairo Alberto; Pérez Arroyave, Hugo Román

    2014-01-01

    Este artículo analiza y reflexiona sobre el uso y las ventajas de las Tecnologías de Información y Comunicación (TIC) en los procesos de negociación internacional de las empresas colombianas, todo ello a partir de un estudio de campo realizado en 380 empresas, soportado por entrevistas telefónicas. De los resultados obtenidos se concluye que en Colombia la mayoría de empresas utilizan, para sus procesos de negociación internacional, TIC genéricas y convencionales, las cuales influyen favorabl...

  12. Un análisis de la gestión de la calidad total y de la gestión del conocimiento como fuente de ventajas competitivas.

    OpenAIRE

    Mihi Ramírez, Antonio

    2008-01-01

    La importancia relativa de los factores productivos ha cambiado, resultando crucial que los procesos de gestión de empresas tengan en cuenta la gestión del conocimiento. Además, la gestión de la calidad total guarda una estrecha relación con la gestión del conocimiento, y son también una fuente importante de ventajas competitivas. La fi nalidad de esta investigación es analizar cómo la gestión de la calidad y la gestión del conocimiento actúan, ambas, como creadoras de las competencias esenci...

  13. GESTIÓN DEL CONOCIMIENTO Y ORIENTACIÓN AL MARKETING INTERNO EN EL DESARROLLO DE VENTAJAS COMPETITIVAS EN EL SECTOR HOTELERO / KNOWLEDGE MANAGEMENT AND INTERNAL MARKETING ORIENTATION FOR THE DEVELOPMENT OF COMPETITIVE ADVANTAGES IN THE HOTEL SECTOR

    OpenAIRE

    Ruizalba Robledo, José Luis; Vallespín Arán; María; Pérez-Aranda, Javier

    2015-01-01

    La orientación al marketing interno (OMI) puede constituir una herramienta de gestión del conocimiento de los empleados que permita a las empresas desarrollar una ventaja competitiva en la medida en que genera información, la comunica internamente para terminar ofreciendo una respuesta a sus necesidades. La OMI, mediante la adecuada gestión del capital humano, facilita competir de forma más efectiva y dar una respuesta ágil a las demandas del mercado. En este estudio se analizan las 3 dimensi...

  14. Scientific Equipment Division - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2001-01-01

    Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: - designing of devices and equipment for experiments in physics, their mechanical construction and assembly. In particular, there are vacuum chambers and installations for HV and UHV; - maintenance and upgrading of the existing installations and equipment in our Institute; - participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and a AO plotter, what allows us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. It offers the following possibilities: - turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc-type elements of a diameter up to 600 mm and a length not exceeding 300 mm; - milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm; - grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm; - drilling - holes of a diameter up to 50 mm; - welding - electrical and gas welding, including TIG vacuum-tight welding; - soft and hard soldering; - mechanical works including precision engineering; - plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides; - painting - paint spraying with possibility of using furnace-fred drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop posses CNC milling machine which can be used for machining of work-pieces up to 500 kg

  15. Ventajas del colgajo frontal expandido para la reconstrucción nasal Advantages of the expanded frontal flap for nasal reconstruction

    Directory of Open Access Journals (Sweden)

    Julio César Gálvez Chávez

    2010-12-01

    Full Text Available INTRODUCCIÓN. Desde 1957 la expansión tisular se ha convertido en una técnica muy utilizada en cirugía reconstructiva, pues permite obtener gran cantidad de tejido blando para corregir defectos cutáneos. En Cuba se ha publicado muy poco sobre la utilización de expansores cutáneos de la región frontal para la reconstrucción nasal. El objetivo de este trabajo fue caracterizar la utilidad del colgajo frontal expandido, para la reconstrucción de defectos nasales distales de espesor total en pacientes con frente corta. MÉTODOS. Se realizó un estudio descriptivo, prospectivo, con pacientes con defectos nasales secundarios a cirugía oncológica, traumatismos y otras causas, a los que se les practicó una reconstrucción nasal con colgajo frontal expandido en el Instituto Nacional de Oncología y Radiobiología y el Hospital «Hermanos Ameijeiras», entre junio de 1999 y mayo de 2007. RESULTADOS. Hubo una ganancia promedio de 1,0 cm en longitud del colgajo frontal expandido con respecto al diseño oblicuo sin expansión. Se logró la reconstrucción de la cubierta cutánea en todos los casos, incluso en los defectos más distales, como los del ala nasal. El cierre de la zona donante siempre fue de forma directa. CONCLUSIONES. Se pudo caracterizar la utilidad del colgajo frontal expandido en la muestra estudiada y se encontró entre sus ventajas fundamentales la ganancia en longitud con respecto a la distancia vertical de la frente. Concordamos con la mayoría de los autores en cuanto a su utilidad, siempre que esté indicado y disponible, y en que es un recurso alternativo cuando existe poco tejido disponible para la reconstrucción de los defectos nasales.INTRODUCTION. From 1957, the tissues expansion has becomes a very used technique in reconstructive surgery, since allows to obtain abundant soft tissue to correct cutaneous defects. In Cuba there aren't much publications on the use of cutaneous expanders of frontal region to nasal

  16. Mining face equipment

    Energy Technology Data Exchange (ETDEWEB)

    G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

    1981-01-07

    Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

  17. Coal ash monitoring equipment

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, C G; Wormald, M R

    1978-10-02

    The monitoring equipment is used to determine the remainder from combustion (ash slack) of coal in wagons designed for power stations. Next to the rails, a neutron source (252 Cf, 241 Am/Be) is situated, which irradiates the coal with neutrons at a known dose, which produces the reaction 27 Al (n ..gamma..) Al 28. The aluminium content is a measure of the remainder. The 1.78 MeV energy is measured downstream of the rail with a detector. The neutron source can only act in the working position of a loaded wagon.

  18. Management of Transportation Equipment.

    Science.gov (United States)

    1982-11-01

    Record% % %. "jP -M -. M LIh TRANSPORTATION MAENTKENAI4CE SHOP WORKLOAD CONTROL WORK CENTER SADR A-OR .a’* tLR 4.,R53 8114LM 0 o 251 50 75 100 125 ISO ...PDBP 06 7 4892 TRACTOR, WHEEL, INDUST, 14001-20000 PDBP 06 7 4893 TRACTOR, WHEEL, INDUST, 20001-27000 PDBP 06 7 4894 TRACTOR, WHEEL, INDUST, 27001 PDBP...27K TRACTOR, WHEEL, INDUST, 27001 PDBP & UP P-i LINE ITEM 07 LIGHTING AND POWER GENERATION EQUIPMENT 5110 T FLOODLIGHT ELEC FLOODLIGHT, ELEC, TRUCK

  19. Ayurvedic Medicine

    Science.gov (United States)

    ... to the biologic humors of the ancient Greek system. Using these concepts, Ayurvedic physicians prescribe individualized treatments, including compounds of herbs or proprietary ingredients, and diet, exercise, and lifestyle recommendations. The majority of India’s population uses Ayurvedic medicine ...

  20. COPD Medicine

    Science.gov (United States)

    ... Education & Training Home Treatment & Programs Medications COPD Medications COPD Medications Make an Appointment Ask a Question Refer ... control the symptoms of chronic obstructive pulmonary disease (COPD). Most people with COPD take long-acting medicine ...

  1. Nuclear medicine

    International Nuclear Information System (INIS)

    Blanquet, Paul; Blanc, Daniel.

    1976-01-01

    The applications of radioisotopes in medical diagnostics are briefly reviewed. Each organ system is considered and the Nuclear medicine procedures pertinent to that system are discussed. This includes, the principle of the test, the detector and the radiopharmaceutical used, the procedure followed and the clinical results obtained. The various types of radiation detectors presently employed in Nuclear Medicine are surveyed, including scanners, gamma cameras, positron cameras and procedures for obtaining tomographic presentation of radionuclide distributions [fr

  2. Nuclear medicine

    International Nuclear Information System (INIS)

    Chamberlain, M.J.

    1986-01-01

    Despite an aggressive, competitive diagnostic radiology department, the University Hospital, London, Ontario has seen a decline of 11% total (in vivo and in the laboratory) in the nuclear medicine workload between 1982 and 1985. The decline of in vivo work alone was 24%. This trend has already been noted in the U.S.. Nuclear medicine is no longer 'a large volume prosperous specialty of wide diagnostic application'

  3. Californium-252 Program Equipment Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Chattin, Fred Rhea [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Kenton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ezold, Julie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    To successfully continue the 252Cf production and meet the needs of the customers, a comprehensive evaluation of the Building 7920 processing equipment was requested to identify equipment critical to the operational continuity of the program.

  4. Beijing nuclear medicine survey 2005: general information

    International Nuclear Information System (INIS)

    Geng Jianhua; Si Hongwei; Chen Shengzu

    2008-01-01

    Objective: To evaluate the status of nuclear medicine department in Beijing area. Methods: Staff, equipment and clinical applications of nuclear medicine departments in Beijing area during 2005 were evaluated by postal questionnaires. Results: Thirty nuclear medicine departments responded to our survey. In these departments, 321 staff, 141 doctors, 122 technicians, 7 physicists, 22 nurses and 29 other staff were employed; and 41 large imaging equipments, 37 SPECT, 3 PET, 1 PET-CT were equipped. During 2005, 88135 radionuclide imaging (84734 for SPECT, 3401 for PET), 462246 radioimmunoassay and 2228 radionuclide therapies (the most for Graves' disease, the second for thyroid cancer, the third for bone metastasis) were performed. For only 41.5% and 22.0% equipments the daily quality control (QC) and weekly QC were conducted. Conclusions Staff, equipments and activities of nuclear medicine department in Beijing were in a considerable scale, but did not balance among hospitals. Most departments should increase the number of physicists and the equipment QC procedures to improve the image quality. (authors)

  5. Nuclear Medicine Engineering

    International Nuclear Information System (INIS)

    Mateescu, Gheorghe; Craciunescu, Teddy

    2000-01-01

    'An image is more valuable than a thousand words' - this is the thought that underlies the authors' vision about the field of nuclear medicine. The monograph starts with a review of some theoretical and engineering notions that grounds the field of nuclear medicine: nuclear radiation, interaction of radiation with matter, radiation detection and measurement, numerical analysis. Products and methods needed for the implementation of diagnostic and research procedures in nuclear medicine are presented: radioisotopes and radiopharmaceuticals, equipment for in-vitro (radioimmunoassay, liquid scintillation counting) and in-vivo investigations (thyroid uptake, renography, dynamic studies, imaging). A special attention is focused on medical imaging theory and practice as a source of clinical information (morphological and functional). The large variety of parameters, components, biological structures and specific properties of live matter determines the practical use of three-dimensional tomographic techniques based on diverse physical principles: single-photon emission, positron emission, X-rays transmission, nuclear magnetic resonance, ultrasounds transmission and reflection, electrical impedance measurement. The fundamental reconstruction algorithms i.e., algorithms based on the projection theorem and Fourier filtering, algebraic reconstruction techniques and the algorithms based on statistical principles: maximum entropy, maximum likelihood, Monte Carlo algorithms, are depicted in details. A method based on the use of the measured point spread function is suggested. Some classical but often used techniques like linear scintigraphy and Anger gamma camera imaging are also presented together with some image enhancement techniques like Wiener filtering and blind deconvolution. The topic of the book is illustrated with some clinical samples obtained with nuclear medicine devices developed in the Nuclear Medicine Laboratory of the National Institute of Nuclear Physics and

  6. VENTAJAS COMPETITIVAS DE LAS EMPRESAS DE TELEFONÍA MÓVIL EN AMÉRICA LATINA. Análisis desde la perspectiva de los grupos estratégicos

    Directory of Open Access Journals (Sweden)

    Mónica García-Ochoa Mayor

    2015-01-01

    Full Text Available El objetivo del presente artículo es estudiar la estructura de la industria de telefonía móvil en los países latinoamericanos, identificando la existencia de grupos estratégicos así como analizando las diferencias de desempeño empresarial entre los mismos. El propósito final es identificar las ventajas competitivas de los grupos con mejor desempeño, así como las estrategias que les han llevado a conseguirlo. El análisis empírico se ha llevado a cabo utilizando datos de una muestra de las 22 empresas latinoamericanas con mayor capitalización bursátil de la industria en el año 2013. Los resultados revelan la existencia de cinco grupos estratégicos y la presencia de diferencias significativas en el desempeño empresarial intergrupal. Las variables determinantes de las ventajas competitivas de los grupos con mejor desempeño son la cuota de mercado, el número de suscriptores y la fidelidad de los clientes.

  7. Métodos de análisis foliar aplicados bosques naturales y exóticos de interés comercial: características, ventajas y desventajas.

    Directory of Open Access Journals (Sweden)

    Carlos Esse

    2014-07-01

    Full Text Available Resumen El presente trabajo, corresponde a una síntesis bibliográfica cuyo objetivo radica en la descripción de las principales características de tres de los métodos más utilizados en los análisis de tejido foliar de origen vegetal. Para ello, se analizaron los estudios relacionados la temática expuesta, desde los cuales se extrajeron los principales resultados y discusiones sobre las ventajas del uso de cada uno de ellos. Los métodos aquí presentados corresponden al método de los valores críticos (VC, método DRIS (diagnosis and recommendation integrated system, y método a través del análisis de vectores. Las principales conclusiones indican que los tres métodos permiten abordar en general las distintas condiciones en las cuales crecen los bosques naturales y exóticos de interés comercial, no destacándose ningún método sobre otro, sin embargo, cada uno posee sus ventajas dependiendo de la especie tratada y el sitio. Lo anterior permite su recomendación con base a características de la especie analizada y las condiciones de sitio en las cuales crece y se desarrollan las especies forestales.

  8. Equipment for the extraction of 99sup(m)TcO4Na

    International Nuclear Information System (INIS)

    Pliego, O.H.; Fraga de Suarez, A.H.; Goncalvez, Maria de; Marques, Roberto; Guerrero, Gustavo; Mitta, A.E.A

    1980-04-01

    An equipment is described for the extraction of 99 sup(m)Tc by the liquid-liquid extraction method, installed at the Nuclear Medicine Center of theHospital de Clinicas ''Jose de San Martin''. (author) [es

  9. Characterization equipment essential drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered Support drawings until the Characterization Equipment Drawing Evaluation Report is completed

  10. Coal mining equipment

    International Nuclear Information System (INIS)

    Stein, R.R.; Martin, T.W.

    1991-01-01

    The word in longwall components is big, and these larger components have price tags to match. The logic behind the greater investment is that it will yield high production rates and good uptime statistics. This is true in most cases. More important than single-shift tonnage records, average shift production continues to climb upwards. This paper reports on the quality, and more significantly, the quantity of service supplied for long-wall equipment, which has reached levels that would have been seen as unachievable when longwall mining was first introduced in the U.S. The school of thought then was that longwall would increase productivity in part by reducing the number of production units and thus reducing the number of personnel employed underground. The expectation of fewer employees turned out to be unrealistic. That was probably one reason that some early attempts to install longwall system looked more like failures than vision of the future

  11. Reactor fuel charging equipment

    International Nuclear Information System (INIS)

    Wade, Elman.

    1977-01-01

    In many types of reactor fuel charging equipment, tongs or a grab, attached to a trolley, housed in a guide duct, can be used for withdrawing from the core a selected spent fuel assembly or to place a new fuel assembly in the core. In these facilities, the trolley may have wheels that roll on rails in the guide duct. This ensures the correct alignment of the grab, the trolley and fuel assembly when this fuel assembly is being moved. By raising or lowering such a fuel assembly, the trolley can be immerged in the coolant bath of the reactor, whereas at other times it can be at a certain level above the upper surface of the coolant bath. The main object of the invention is to create a fuel handling apparatus for a sodium cooled reactor with bearings lubricated by the sodium coolant and in which the contamination of these bearings is prevented [fr

  12. Travel medicine

    Science.gov (United States)

    Aw, Brian; Boraston, Suni; Botten, David; Cherniwchan, Darin; Fazal, Hyder; Kelton, Timothy; Libman, Michael; Saldanha, Colin; Scappatura, Philip; Stowe, Brian

    2014-01-01

    Abstract Objective To define the practice of travel medicine, provide the basics of a comprehensive pretravel consultation for international travelers, and assist in identifying patients who might require referral to travel medicine professionals. Sources of information Guidelines and recommendations on travel medicine and travel-related illnesses by national and international travel health authorities were reviewed. MEDLINE and EMBASE searches for related literature were also performed. Main message Travel medicine is a highly dynamic specialty that focuses on pretravel preventive care. A comprehensive risk assessment for each individual traveler is essential in order to accurately evaluate traveler-, itinerary-, and destination-specific risks, and to advise on the most appropriate risk management interventions to promote health and prevent adverse health outcomes during travel. Vaccinations might also be required and should be personalized according to the individual traveler’s immunization history, travel itinerary, and the amount of time available before departure. Conclusion A traveler’s health and safety depends on a practitioner’s level of expertise in providing pretravel counseling and vaccinations, if required. Those who advise travelers are encouraged to be aware of the extent of this responsibility and to refer all high-risk travelers to travel medicine professionals whenever possible. PMID:25500599

  13. Mesopotamian medicine.

    Science.gov (United States)

    Retief, F P; Cilliers, L

    2007-01-01

    Although the Mesopotamian civilisation is as old as that of Egypt and might even have predated it, we know much less about Mesopotamian medicine, mainly because the cuneiform source material is less well researched. Medical healers existed from the middle of the 3rd millennium. In line with the strong theocratic state culture, healers were closely integrated with the powerful priestly fraternity, and were essentially of three main kinds: barû (seers) who were experts in divination, âshipu (exorcists), and asû (healing priests) who tended directly to the sick. All illness was accepted as sent by gods, demons and other evil spirits, either as retribution for sins or as malevolent visitations. Treatment revolved around identification of the offending supernatural power, appeasement of the angry gods, for example by offering amulets or incantations, exorcism of evil spirits, as well as a measure of empirical therapy aimed against certain recognised symptom complexes. Medical practice was rigidly codified, starting with Hammurabi's Code in the 18th century BC and persisting to the late 1st millennium BC. Works like the so-called Diagnostic Handbook, the Assyrian Herbal and Prescription Texts describe the rationale of Mesopotamian medicine, based predominantly on supernatural concepts, although rudimentary traces of empirical medicine are discernible. There is evidence that Egyptian medicine might have been influenced by Mesopotamian practices, but Greek rational medicine as it evolved in the 5th/4th centuries BC almost certainly had no significant Mesopotamian roots.

  14. Checklists for quality assurance and audit in nuclear medicine

    International Nuclear Information System (INIS)

    Williams, E.D.; Harding, L.K.; McKillop, J.H.

    1989-01-01

    A series of checklists are given which aim to provide some guidance to staff in determining whether their working procedures in nuclear medicine are likely to produce a good service and avoid mistakes. The checklists relate to the special equipment used in nuclear medicine departments, radiopharmaceuticals, nuclear medicine staff, services to medical and other hospital staff and finally the service to patients. The checklists are relevant to an average nuclear medicine department performing less than 2000 imaging studies per year. (U.K.)

  15. Chapter 12. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  16. Medicines by Design

    Science.gov (United States)

    ... Home > Science Education > Medicines By Design Medicines By Design Spotlight Nature's Medicine Cabinet A Medicine's Life Inside ... hunt for drugs of the future. Medicines By Design in PDF | E-PUB Tell Us What You ...

  17. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Physician Resources Professions Site Index A-Z Children's (Pediatric) Nuclear Medicine Children’s (pediatric) nuclear medicine imaging uses ... limitations of Children's Nuclear Medicine? What is Children's (Pediatric) Nuclear Medicine? Nuclear medicine is a branch of ...

  18. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Professions Site Index A-Z Children's (Pediatric) Nuclear Medicine Children’s (pediatric) nuclear medicine imaging uses small amounts ... Children's Nuclear Medicine? What is Children's (Pediatric) Nuclear Medicine? Nuclear medicine is a branch of medical imaging ...

  19. General Nuclear Medicine

    Science.gov (United States)

    ... Resources Professions Site Index A-Z General Nuclear Medicine Nuclear medicine imaging uses small amounts of radioactive ... of General Nuclear Medicine? What is General Nuclear Medicine? Nuclear medicine is a branch of medical imaging ...

  20. Children's (Pediatric) Nuclear Medicine

    Science.gov (United States)

    ... Professions Site Index A-Z Children's (Pediatric) Nuclear Medicine Children’s (pediatric) nuclear medicine imaging uses small amounts ... Children's Nuclear Medicine? What is Children's (Pediatric) Nuclear Medicine? Nuclear medicine is a branch of medical imaging ...

  1. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... News Physician Resources Professions Site Index A-Z Children's (Pediatric) Nuclear Medicine Children’s (pediatric) nuclear medicine imaging ... the limitations of Children's Nuclear Medicine? What is Children's (Pediatric) Nuclear Medicine? Nuclear medicine is a branch ...

  2. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Resources Professions Site Index A-Z Children's (Pediatric) Nuclear Medicine Children’s (pediatric) nuclear medicine imaging uses small ... of Children's Nuclear Medicine? What is Children's (Pediatric) Nuclear Medicine? Nuclear medicine is a branch of medical ...

  3. [Medicinal cannabis].

    Science.gov (United States)

    Van der Meersch, H; Verschuere, A P; Bottriaux, F

    2006-01-01

    Pharmaceutical grade cannabis is available to Dutch patients from public pharmacies in the Netherlands. The first part of this paper reviews the pharmaceutical and pharmacological properties of medicinal cannabis. Detailed information about its composition and quality, potential applications, methods of administration, adverse reactions, drug interactions and safety during pregnancy or breastfeeding are given. The second part deals with the legal aspects of dispensing medicinal cannabis through pharmacies in view of the Belgian and Dutch legislation. The last part discusses the present Belgian regulation about the possession of cannabis.

  4. Nuclear medicine

    International Nuclear Information System (INIS)

    Reichelt, H.G.

    1980-01-01

    Nuclear medicine as a complex diagnostical method is used mainly to detect functional organic disorders, to locate disorders and for radioimmunologic assays (RIA) in vitro. In surgery, its indication range comprises the thyroid (in vivo and in vitro), liver and bile ducts, skeletal and joint diseases, disorders of the cerebro-spinal liquor system and the urologic disorders. In the early detection of tumors, the search for metastases and tumor after-care, scintiscanning and the tumor marcher method (CEA) can be of great practical advantage, but the value of myocardial sciritiscanning in cardiac respectively coronary disorders is restricted. The paper is also concerned with the radiation doses in nuclear medicine. (orig.) [de

  5. Existen ventajas en el abordaje extraperitoneal para el tratamiento del aneurisma de aorta abdominal? Are there advantages in the extraperitoneal approach for the treatment of abdominal aortic aneurysm?

    Directory of Open Access Journals (Sweden)

    Heinz Hiller

    2010-02-01

    Full Text Available Existen controversias acerca de las posibles ventajas del abordaje transperitoneal vs. extraperitoneal en la cirugía de aneurisma de aorta abdominal; con este último, algunos estudios reportan menor morbilidad y complicaciones operatorias. Este estudio describe los resultados que se obtuvieron con los dos abordajes en un solo centro de referencia. Es un estudio retrospectivo, descriptivo, de doce años, en un grupo de 299 pacientes con diagnóstico de aneurisma de aorta abdominal que fueron intervenidos de manera electiva y distribuidos en dos grupos según el abordaje (transperitoneal = grupo 1, extraperitoneal = grupo 2. En total se operaron 93 pacientes en el grupo 1 y 206 pacientes en el 2. En ambos predominaron pacientes del sexo masculino. La edad media fue de 68 años. Las frecuencias de co-morbilidades fueron similares en los dos grupos. Se registró una tendencia a menor número de reoperaciones en el grupo 2 (12,9% vs. 5,8%, De otra parte, se observó una tendencia de mayores complicaciones post-operatorias en el grupo 1 con una frecuencia de 30,1% vs. 12,6% en el grupo 2; sin embargo, el tipo de complicaciones fue similar. Los resultados mostraron una estancia hospitalaria media de 13,3 días (DE ± 10,4 vs. 7,19 días (DE ± 4,20 p= 0,00001, estancia post-operatoria media de 9,16 días (DE ± 8,1 vs. 5,62 días (DE ± 3,46 p= 0,001 y estancia en la unidad de cuidados intensivos media de 2,76 días (DE ± 4,19 vs. 1,56 días (DE ± 1,86 p= 0,00001 en los grupos 1 y 2 respectivamente. La mortalidad inmediata total fue de 3,3%. La frecuencia de mortalidad para los grupos fue de 6,5% (n= 6 vs. 1,9% (n= 4 respectivamente. En nuestra experiencia el abordaje por la vía extraperitoneal presenta una tendencia favorable para los pacientes en cuanto a la estancia hospitalaria, la estancia en la unidad de cuidados intensivos, la frecuencia de complicaciones post-operatorias y la frecuencia de re-intervenciones en el post-operatorio inmediato

  6. Rational use of energy in air conditioning equipment, through an appropriate selection of the main equipment; Uso racional de la energia en equipos de aire acondicionado, mediante la eleccion apropiada del equipo principal

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Zuniga, Jose de Jesus; Herrera Ramos, Manuel [Instituto Mexicano del Petroleo (Mexico)

    1996-07-01

    This paper presents an analysis to diminish the consumption of energy in central air conditioning equipment through an appropriate selection of the equipment. The analysis shows the levels of security and toxicity of the refrigerant, the operational, constructive and economic advantages of the equipment, taking as reference the cooling demand and expenses of energy consumption, as well as the ecological impact derived from the use of the refrigerant. Finally, an economic analysis is presented, involving the expenses of the equipment, operation, maintenance, costs of the consumption of used fluids, et cetera. [Spanish] Uso racional de la energia en equipos de aire acondicionado, mediante la eleccion apropiada del equipo principal. Este trabajo presenta un analisis para disminuir el consumo de energia en los equipos centrales de aire acondicionado mediante la seleccion apropiada del equipo. El analisis muestra los niveles de seguridad y toxicidad del refrigerante, las ventajas operativas, constructivas y economicas del equipo, tomando como referencia la demanda de enfriamiento y gastos de consumo de energia, asi como el impacto ecologico derivado de su empleo del refrigerante. Finalmente, se presenta un analisis economico, involucrando los gastos del equipo, operacion, mantenimiento, costos de consumos de fluidos utilizados, etcetera.

  7. Equipment repair in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, S

    1982-01-01

    Most equipment in Chinese coal mines consists of machinery and equipment produced in the 1950s; the efficiency of 4-62, CTD-57 and 70B/sub 2/ ventilators is 15% lower than that of new ones; that of SSM and AYaP pumps, 10% lower than of modern ones. Equipment renovation is done in three ways: replacing obsolete equipment with new equipment of the same type; improving the performance of existing equipment by introducing efficiency and reconstruction; and replacing obsolete equipment with advanced equipment. It is indicated that the second way, for example, replacement of 4-62 ventilator blades with a maximum efficiency of 73% by 4-72 ventilator blades raises its efficiency to 90%. Replacing the 8DA-8x3 water pump, having a maximum efficiency of 63%, with the 200D 43x3 pump with a maximum efficiency of 78%, enables an electricity savings of 7000 yuan per year, which exceeds all replacement costs (600 yuan). The need to improve equipment maintenance and preventive work to increase equipment service life and to introduce new techniques and efficiency is noted.

  8. Mountain medicin

    DEFF Research Database (Denmark)

    Bay, Bjørn; Hjuler, Kasper Fjellhaugen

    2016-01-01

    medicine. The first part covered high-altitude physiology and medical aspects of objective alpine dangers and the increased exposure to ultraviolet radiation. This part covers altitude sickness, fluid balance, nutrition, and precautions for patients with pre-existing medical conditions, pregnant women...

  9. Personalized medicine

    DEFF Research Database (Denmark)

    Bendtzen, Klaus

    2013-01-01

    engineered anti-TNF-alpha antibody constructs now constitute one of the heaviest medicinal expenditures in many countries. All currently used TNF antagonists may dramatically lower disease activity and, in some patients, induce remission. Unfortunately, however, not all patients respond favorably, and safety...

  10. Predictive medicine

    NARCIS (Netherlands)

    Boenink, Marianne; ten Have, Henk

    2015-01-01

    In the last part of the twentieth century, predictive medicine has gained currency as an important ideal in biomedical research and health care. Research in the genetic and molecular basis of disease suggested that the insights gained might be used to develop tests that predict the future health

  11. Medicinal Mushrooms

    NARCIS (Netherlands)

    Lindequist, U.; Won Kim, H.; Tiralongo, E.; Griensven, van L.J.L.D.

    2014-01-01

    Since beginning of mankind nature is the most important source of medicines. Bioactive compounds produced by living organisms can be used directly as drugs or as lead compounds for drug development. Besides, the natural material can be used as crude drug for preparation of powder or extracts. Plants

  12. Medicinal Plants.

    Science.gov (United States)

    Phillipson, J. David

    1997-01-01

    Highlights the demand for medicinal plants as pharmaceuticals and the demand for health care treatments worldwide and the issues that arise from this. Discusses new drugs from plants, anticancer drugs, antiviral drugs, antimalarial drugs, herbal remedies, quality, safety, efficacy, and conservation of plants. Contains 30 references. (JRH)

  13. 21 CFR 866.4540 - Immunonephelometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4540 Immunonephelometer equipment. (a) Identification. Immunonephelometer equipment for clinical use...

  14. 21 CFR 866.4520 - Immunofluorometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4520 Immunofluorometer equipment. (a) Identification. Immunofluorometer equipment for clinical use with...

  15. Basic requirements of nuclear medicine services

    International Nuclear Information System (INIS)

    Belcher, E.H.

    1992-01-01

    Technological progress in nuclear medicine continues, not always to the immediate advantage of the developing world. The capital expense, operational demands and maintenance requirements of ever more complex equipment, the consequent need for highly trained staff, the necessity to assure regular supplies of costly radioactive materials, all present problems to which compromise or alternative solutions must often be sought. This chapter constitutes an attempt to define the basic requirements for thr practice of nuclear medicine with respect to staff, equipment, accommodation, supplies and supporting services with particular reference to the needs of institutions in developing countries

  16. Basic requirements of nuclear medicine services

    Energy Technology Data Exchange (ETDEWEB)

    Belcher, E H

    1993-12-31

    Technological progress in nuclear medicine continues, not always to the immediate advantage of the developing world. The capital expense, operational demands and maintenance requirements of ever more complex equipment, the consequent need for highly trained staff, the necessity to assure regular supplies of costly radioactive materials, all present problems to which compromise or alternative solutions must often be sought. This chapter constitutes an attempt to define the basic requirements for thr practice of nuclear medicine with respect to staff, equipment, accommodation, supplies and supporting services with particular reference to the needs of institutions in developing countries

  17. Equipment standards for interventional cardiology

    International Nuclear Information System (INIS)

    Dowling, A.; Gallagher, A.; Walsh, C.; Malone, J.

    2005-01-01

    Interventional radiology has seen rapid growth in cardiology and represents an alternative to hazardous surgery. Recently there has been a substantial growth in the number of procedures being performed and interventional cardiology (IC) procedures are the most common interventional procedures in Europe. Advances in imaging technology have facilitated the development of increasingly complex radiological IC equipment. Currently, the technology is developing at a rate ahead of supporting research, equipment standards and a regulatory framework. International standards play a key role in the design, manufacture and performance of radiological IC equipment. A survey of 12 IC systems (15 imaging chains) was conducted in Irish hospitals. The aim of the study was to assess the imbalance between rapidly advancing technology and existing standards and to propose recommendations for new IC equipment standards. The results demonstrate the need for definitive equipment requirements and standardisation in the design, manufacture, acceptance and maintenance of IC equipment. (authors)

  18. Generation of equipment response spectrum considering equipment-structure interaction

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Yoo, Kwang Hoon

    2005-01-01

    Floor response spectra for dynamic response of subsystem such as equipment, or piping in nuclear power plant are usually generated without considering dynamic interaction between main structure and subsystem. Since the dynamic structural response generally has the narrow-banded shapes, the resulting floor response spectra developed for various locations in the structure usually have high spectral peak amplitudes in the narrow frequency bands corresponding to the natural frequencies of the structural system. The application of such spectra for design of subsystems often leads to excessive design conservatisms, especially when the equipment frequency and structure are at resonance condition. Thus, in order to provide a rational and realistic design input for dynamic analysis and design of equipment, dynamic equipment-structure interaction (ESI) should be considered in developing equipment response spectrum which is particularly important for equipment at the resonance condition. Many analytical methods have been proposed in the past for developing equipment response spectra considering ESI. However, most of these methods have not been adapted to the practical applications because of either the complexities or the lack of rigorousness of the methods. At one hand, mass ratio among the equipment and structure was used as an important parameter to obtain equipment response spectra. Similarly, Tseng has also proposed the analytical method for developing equipment response spectra using mass ratio in the frequency domain. This method is analytically rigorous and can be easily validated. It is based on the dynamic substructuring method as applied to the dynamic soil-structure interaction (SSI) analysis, and can relatively easily be implemented for practical applications without to change the current dynamic analysis and design practice for subsystems. The equipment response spectra derived in this study are also based on Tseng's proposed method

  19. Overall Equipment Effectiveness Implementation Criteria

    Science.gov (United States)

    Abramova, I. G.; Abramov, D. A.

    2018-01-01

    This article documents the methods applied in production control technics specifically focused on commonly used parameter OEE (Overall Equipment Effectiveness). The indicators of extensive and intensive use of equipment are considered. Their appointment this is comparison in the same type of production within the industry and comparison of single-type and / or different types of equipment in terms of capacity. However, it is shown that there is no possibility of revealing the reasons for the machine’s operation: productive / unproductive, with disturbances. Therefore, in the article reveals the approaches to calculating the indicator characterizing the direct operation of the equipment. The Machine Load coefficient is approaching closely to the indicator of the efficiency of the use of equipment. Methods analysis is proceeded through the historically applied techniques such as “Stopwatch” and “Motion” studies. Was performed the analysis of the efficiency index of OEE equipment using the comparable indexes performance of equipment in the Russian practice. An important indicator of OEE contains three components. The meaning of each of them reflects historically applicable indicators. The value of the availability of equipment indicator is close to the value of the equipment extensibility index. The value of the indicator of the efficiency of work can be compared with the characteristic of the capacity of the equipment and the indicator of the quality level can meet the requirements for compliance with the manufacturing technology. Shown that the sum of the values of the coefficient of “Availability” of the equipment and the value of the “Factor of compaction of working hours” are one. As well as the total value of the indicator “level of quality” and the coefficient of marriage given in the result unit. The measurability of the indicators makes it possible to make a prediction about efficiency of the equipment.

  20. Quality assurance in nuclear medicine

    International Nuclear Information System (INIS)

    Paras, P.

    1978-01-01

    Quality assurance practices must be followed throughout the entire nuclear medicine process, from the initial decision to perform a particular procedure, through the interpretation and reporting of the results. The various parameters that can be defined and measured in each area must be monitored by quality control tests to assure the excellence of the total nuclear medicine process. The presentation will discuss each of the major areas of nuclear medicine quality control and their interaction as a part of the entire system. Quality control testing results and recommendations for measurements of radioactivity distribution will be described with emphasis on imaging equipment and dose calibrating instrumentation. The role of the health physicist in a quality assurance program will be stressed. (author)

  1. [What's new in internal medicine?

    Science.gov (United States)

    Fardet, L

    2017-12-01

    As it is practiced in France, internal medicine meets the Anglo-Saxon definition of the specialty, ie doctors "equipped to handle the broad and comprehensive spectrum of illnesses that affect adults, and are recognized as experts in diagnosis, in treatment of chronic illness, and in health promotion and disease prevention - they are not limited to one type of medical problem or organ system". This 2017 "What's new in internal medicine" will consist of 2 parts, a first part on significant publications in the field of systemic and autoimmune diseases and a second part on more diverse publications (HIV, cancer, pregnancy, well-being...) important for medicine in general and its different specialties. © 2017 Elsevier Masson SAS. Tous droits réservés.

  2. Radiation protection in nuclear medicine

    International Nuclear Information System (INIS)

    Seeburrun, V.

    2013-04-01

    Radiation protection in nuclear medicine in this project is concerned with the reduction of doses to workers, patients and members of the public. Protection of workers is achieved by adopting good personal habits, good housekeeping, proper use of personal protective devices and equipment, attend training and have continuous education. Exposure to radiation of workers and the members of the public are minimised by proper management of radioactive waste and safe transport of radioactive material. The design and shielding of a nuclear medicine department shall further provide for the protection of the worker, the patient and the general public. Protection of patient is achieved by justifying the procedure, delivering the minimum radiation dose possible to the patient while obtaining the best image quality and applying guidance levels. Special considerations shall be given to pregnant and breast-feeding patients. Quality assurance programme through image quality, radiopharmaceutical quality and patient records on nuclear medicine procedures shall provide assurance to the patient. (au)

  3. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  4. Management methodology for pressure equipment

    Science.gov (United States)

    Bletchly, P. J.

    Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

  5. Cryogenic equipment; Materiel cryogenique

    Energy Technology Data Exchange (ETDEWEB)

    Leger, L; Javellaud, J; Caro, C; Gilguy, R; Testard, O

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [French] De nombreuses experiences utilisant les basses temperatures, necessitent l'emploi d'un materiel cryogenique complexe n'existant pas dans le commerce. Les cryostats presentes ici ont ete realises a partir d'elements standard, ce qui permet, malgre la diversite des appareils, de realiser un ensemble a moindre frais. Les reservoirs d'azote et d'helium liquides ont ete concus de facon a limiter les pertes et a conferer au cryostat la plus grande autonomie possible. L'enceinte experimentale situee en general dans la partie inferieure de l'appareil necessite dans tous les cas une etude speciale. D'autre part des ensembles complets tels que les cannes de transfert, piege isole, robinet pour vide secondaire, ont ete concus dans le meme souci de rentabilite et de standardisation. Ce materiel peut donc repondre a un grand nombre d'exigences experimentales, il est facilement adaptable, et les consommations d'helium et d'azote liquide sont tres reduites. (auteurs)

  6. Safety guide for protection in nuclear medicine laboratories

    International Nuclear Information System (INIS)

    1995-01-01

    The regulations that must be taken into account during constructing the nuclear medicine laboratories to meet the requirements of radiation protection and the specifications of equipment in the laboratory, quality control, radioactive monitoring, protective procedures, personnel qualifications are given

  7. Nuclear Medicine | RadTown USA | US EPA

    Science.gov (United States)

    2018-05-01

    >Nuclear medicine procedures can help detect and treat disease by using a small amount of radioactive material, called a radiopharmaceutical. Some radiopharmaceuticals are used with imaging equipment to detect diseases.

  8. metal content determination of some sexual dysfunction medicine

    African Journals Online (AJOL)

    userpc

    METAL CONTENT DETERMINATION OF SOME SEXUAL DYSFUNCTION. MEDICINE ... motivation for sexual desire, functioning and response .... generated and optimization of the equipment ... by the users' have to be moderate otherwise it.

  9. Determinantes de las relaciones reales de intercambio de España con Alemania (1970-2010. Un análisis econométrico de la ventaja absoluta de costo intrasectorial

    Directory of Open Access Journals (Sweden)

    Fahd Boundi Chraki

    2017-07-01

    Full Text Available El presente trabajo tiene como objeto analizar los determinantes de las relaciones reales de intercambio de España con Alemania, tomando como período 1970-2010. Para tal propósito, se lleva a cabo un análisis de series temporales aplicando pruebas de raíces unitarias y un test de cointegración, siendo el marco teórico de referencia el enfoque de Anwar Shaikh de la ventaja absoluta de costo intrasectorial. Finalmente, el análisis econométrico constata que el tipo de cambio real efectivo entre España y Alemania se encuentra sujeto en el largo plazo a los costos laborales unitarios reales relativos de la industria manufacturera de ambos países.

  10. Environmental medicine

    International Nuclear Information System (INIS)

    Steneberg, A.

    1996-01-01

    'Environmental medicine' deals with the manifold health problems from environmental factors of chemical, physical and psychosocial origin that are possible or have been observed. The book gives insight into the current state of knowledge of environmental medicine institutions, possibilities of diagnosis and therapeutic methods. It offers a systematic overview of pollutant sources and pollutant effects and points out, inter alia, syndromes that are discussed in connection with environmental factors: not only allergies and carcinogenous diseases but also symptom complexes that are hard to diagnose by ordinary methods such as the sick-building syndrome, multiple sensitivity to chemicals, electrosensitivity, amalgam intoxications, disorders due to wood preservatives and fungal diseases. The lingering course of a disease and a set of symptoms varying from one patient to another are the rule, not the exception, because environmental diseases are due above all to the chronic uptake of low pollutant doses (orig./MG) [de

  11. 29 CFR 1926.952 - Mechanical equipment.

    Science.gov (United States)

    2010-07-01

    ... equipment that are not covered with insulating protective equipment. (c) Derrick trucks, cranes and other lifting equipment. (1) All derrick trucks, cranes and other lifting equipment shall comply with subpart N...

  12. 22 CFR 135.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  13. 21 CFR 1403.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  14. 45 CFR 602.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  15. 49 CFR 18.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  16. 34 CFR 80.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  17. 10 CFR 600.232 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  18. 45 CFR 1183.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  19. Nuclear medicine

    International Nuclear Information System (INIS)

    Sibille, L.; Nalda, E.; Collombier, L.; Kotzki, P.O.; Boudousq, V.

    2011-01-01

    Nuclear medicine is a medical specialty using the properties of radioactivity. Radioactive markers associated with vectors are used as a tracer or radiopharmaceutical for diagnostic purposes and/or therapy. Since its birth more than half a century ago, it has become essential in the care of many patients, particularly in oncology. After some definitions, this paper presents the main nuclear techniques - imaging for diagnostic, radiopharmaceuticals as therapeutic agents, intra-operative detection, technique of radioimmunoassay - and the future of this field. (authors)

  20. Transfusion Medicine

    Directory of Open Access Journals (Sweden)

    Smit Sibinga CT

    2013-07-01

    Full Text Available Cees Th. Smit Sibinga ID Consulting, Zuidhorn, The NetherlandsTransfusion Medicine is a bridging science, spanning the evidence-based practice at the bedside with the social sciences in the community.     Transfusion Medicine starts at the bedside. Surprisingly, only recently that has become rediscovered with the development of ‘patient blood management’ and ‘patient centered’ approaches to allow the growth of an optimal and rational patient care through supportive hemotherapy – safe and effective, affordable and accessible.1    Where transfusion of blood found its origin in the need of a patient, it has drifted away for a long period of time from the bedside and has been dominated for almost a century by laboratory sciences. At least the first ten editions of the famous and well reputed textbook Mollison’s Blood Transfusion in Clinical Medicine contained only a fraction on the actual bedside practice of transfusion medicine and did not focus at all on patient blood management.2    This journal will focus on all aspects of the transfusion chain that immediately relate to the bedside practice and clinical use of blood and its components, and plasma derivatives as integral elements of a human transplant tissue. That includes legal and regulatory aspects, medical, ethical and cultural aspects, pure science and pathophysiology of disease and the impact of transfusion of blood, as well as aspects of the epidemiology of blood transfusion and clinical indications, and cost-effectiveness. Education through timely and continued transfer of up to date knowledge and the application of knowledge in clinical practice to develop and maintain clinical skills and competence, with the extension of current educational approaches through e-learning and accessible ‘apps’ will be given a prominent place.

  1. ENERGY MEDICINE

    OpenAIRE

    Srinivasan, T. M.

    1987-01-01

    Energy medicine is the most comprehensive concept introduced in medical diagnostics and therapy to account for a whole range of phenomena and methods available to help an individual proceed from sickness to health. The modern medical theories do not account for, much less accept many traditional therapies due to deep suspicion that the older methods are not scientific. However, the Holistic Health groups around the world have now created an environment for therapies which work at subtle energ...

  2. Transfusion medicine

    International Nuclear Information System (INIS)

    Murawski, K.; Peetoom, F.

    1986-01-01

    These proceedings contain 24 selections, including papers presented at the conference of American Red Cross held in May 1985, on the Subject of transfusion medicine. Some of the titles are: Fluosol/sup R/-DA in Radiation Therapy; Expression of Cloned Human Factor VIII and the Molecular Basis of Gene Defects that Cause Hemophilia; DNA-Probing Assay in the Detection of Hepatitis B Virus Genome in Human Peripheral Blood Cells; and Monoclonal Antibodies: Convergence of Technology and Application

  3. Imágenes que revelan sentidos: ventajas y desventajas de la entrevista de foto-elucidación en un estudio sobre jóvenes y escuela media en la Ciudad de Buenos Aires

    Directory of Open Access Journals (Sweden)

    Analía Meo

    2011-01-01

    Full Text Available Este artículo examina el uso de una de las técnicas más difundidas en el contexto anglosajón dentro del repertorio de investigaciones con imágenes: la entrevista de foto-elucidación (EFE. Su uso ha sido marginal tanto dentro de la sociología argentina como iberoamericana. La EFE se caracteriza por incluir fotografías durante el transcurso de una entrevista con el propósito de favorecer el diálogo entre entrevistadores y entrevistados, y facilitar recuerdos y la expresión de sentimientos y perspectivas. A partir de la experiencia de investigadores en Estados Unidos e Inglaterra y de los resultados de una investigación propia, se argumenta que la EFE puede enriquecer notablemente el estudio de ciertos fenómenos sociales -tales como las perspectivas de los jóvenes sobre la escuela y sobre sí mismos-, y se brindan elementos para una evaluación crítica de la EFE en estudios producidos en nuestras latitudes. En primer lugar, a partir de la revisión de literatura especializada anglosajona, se examina el alcance, limitaciones y ventajas de la EFE en investigación social. Seguidamente, se describe el uso de materiales visuales en la sociología argentina y se analiza una investigación desarrollada en Buenos Aires. Este caso permite ilustrar ventajas, desventajas y desafíos de la EFE, evidenciando características comunes al contexto anglosajón y otras específicas a sociedades en vías de desarrollo.

  4. Food Service Equipment and Appurtenances.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI.

    Equipment design specifications are presented relating to tables of all kinds, counters, sinks and drainboards, bins, shelves, drawers, hoods and similar kitchen appurtenances, not including baking, roasting, toasting, broiling or frying equipment, food preparation machinery such as slicers, choppers, and cutters, mixers and grinders, steam…

  5. Equipe de trabalho

    Directory of Open Access Journals (Sweden)

    Gabriel Gerber Hornink

    2014-08-01

    Full Text Available   Equipe de Trabalho 2014 1. Equipe editorial Editor-Chefe Bayardo Bapstista Torres, Instituto de Química - USP, Brasil Eduardo Galembeck, Departamento de Bioquímica Instituto de Biologia UNICAMP, Brasil   Editores Gabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas - Unifal-MG, Brasil Vera Maria Treis Trindade, Instituto de Ciências Básicas da Saúde, Departamento de Bioquímica, Universidade Federal do Rio Grande do Sul, Brasil   Corpo Editorial Adriana Cassina, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Angel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, Espanha André Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, Brasil Denise Vaz de Macedo, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Eneida de Paula, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Guilherme Andrade Marson, Instituto de Química - USP, Brasil Jose Antonio Martinez Oyanedel, Universidad de Concepción, Chile Josep Maria Fernández Novell, Dept. Bioquímica i Biologia Molecular Universitat de Barcelona, Espanha Leila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo - USP, Brasil Manuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, Portugal Maria Lucia Bianconi, Instituto de Bioquímica Médica Universidade Federal do Rio de Janeiro (UFRJ, Brasil María Noel Alvarez, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Miguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, Espanha Nelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo - USP, Brasil Paulo De Avila

  6. Information technology equipment cooling method

    Science.gov (United States)

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  7. Upgradation of nuclear medical equipment in the developing countries and its impact in Bangladesh

    CERN Document Server

    Jahangir, S M; Haque, M A S; Hoq, M; Mawla, Y; Morium, T; Uddin, M R; Xie, Y

    2002-01-01

    Bangladesh has thirteen Nuclear Medical Centres and one Institute of Nuclear Medicine in the country which are being run and maintained by the physicians scientists and engineers of Bangladesh Atomic Energy Commission. The peaceful application of atomic energy was initiated through all these Centres with the use of clinical isotopes for thyroid and kidney studies. The equipment used for these purposes were the thyroid uptake system, rectilinear scanner and the multiprobe renogram system. The first gamma camera was installed in the country in 1980 at the Institute of Nuclear Medicine, Dhaka. That was the turning point for the country in the field of nuclear medicine. Presently all the nuclear medical establishments are equipped least with a gamma camera, thyroid uptake system and a renogram system. In the last two decades there has been a tremendous development in the design of nuclear medical equipment. Most of the old equipments were slow and manually operated. In the beginning of nineties of the past centur...

  8. Complementary and Alternative Medicine

    Science.gov (United States)

    ... for Educators Search English Español Complementary and Alternative Medicine KidsHealth / For Teens / Complementary and Alternative Medicine What's ... a replacement. How Is CAM Different From Conventional Medicine? Conventional medicine is based on scientific knowledge of ...

  9. Inspections in veterinary medicine 2005; Veterinaerinspektioner 2005

    Energy Technology Data Exchange (ETDEWEB)

    Joensson, Helene

    2006-11-15

    In Sweden 300 veterinary clinics have a license for x-ray diagnostics. Six of them also have a license for nuclear medicine. During 2005 eight clinics were inspected and the results show that the radiation protection in veterinary medicine can be improved. No clinic fulfilled the regulations of categorization of workplaces and workers (SSI FS 1998:3). Half of the clinics had no Swedish manual to the x-ray equipment and just as many had not performed the annual function check. Obviously, there is a need for more information to staff in veterinary medicine.

  10. Thermal imaging in medicine

    Directory of Open Access Journals (Sweden)

    Jaka Ogorevc

    2015-12-01

    be widely used also in the field of medicine. Implementation of every new technology in a daily clinical practice requires large number of measurements with such equipment compared by reference method for the purpose of clinical validation. The knowledge of measurement problematics is crucial. Collaboration between physicians and engineers on multi- and interdisciplinary level is of high importance for thermal imaging to win confidence of physicians and to gain reliability as a clinical diagnostic tool.

  11. Nuclear medicine

    International Nuclear Information System (INIS)

    Casier, Ph.; Lepage, B.

    1998-01-01

    Except for dedicated devices for mobile nuclear cardiology for instance, the market is set on variable angulation dual heads cameras. These cameras are suited for all general applications and their cost effectiveness is optimized. Now, all major companies have such a camera in their of products. But, the big question in nuclear medicine is about the future of coincidence imaging for the monitoring of treatments in oncology. Many companies are focused on WIP assessments to find out the right crustal thickness to perform both high energy FDG procedures and low energy Tc procedures, with the same SPECT camera. The classic thickness is 3/8''. Assessments are made with 1/2'', 5/8'' or 3/4'' crystals. If FDG procedures proved to be of great interest in oncology, it may lead to the design of a dedicated SPECT camera with a 1'' crustal. Due to the short half of FDG, it may be the dawning of slip ring technology. (e.g. Varicam from Elscint). The three small heads camera market seems to be depressed. Will the new three large heads camera unveiled by Picker, reverse that trend? The last important topic in nuclear medicine is the emergence of new flat digital detectors to get rid of the old bulky ones. Digirad is the first company to manufacture a commercial product based on that technology. Bichron, Siemens and General Electric are working on that development, too. But that technology is very expensive and the market for digital detection in nuclear medicine is not as large as the market in digital detection in radiology. (author)

  12. Development of manufacturing equipment and QC equipment for DUPIC fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

    1999-05-01

    In this study, DUPIC powder and pellet fabrication equipment, welding system, QC equipment, and fission gas treatment are developed to fabricate DUPIC fuel at IMEF M6 hot cell. The systems are improved to be suitable for remote operation and maintenance with the manipulator at hot cell. Powder and pellet fabrication equipment have been recently developed. The systems are under performance test to check remote operation and maintenance. Welding chamber and jigs are designed and developed to remotely weld DUPIC fuel rod with manipulators at hot cell. Remote quality control equipment are being tested for analysis and inspection of DUPIC fuel characteristics at hot cell. And trapping characteristics is analyzed for cesium and ruthenium released under oxidation/reduction and sintering processes. The design criteria and process flow diagram of fission gas treatment system are prepared incorporating the experimental results. The fission gas treatment system has been successfully manufactured. (Author). 33 refs., 14 tabs., 91 figs

  13. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive

  14. Containment and Surveillance Equipment Compendium

    International Nuclear Information System (INIS)

    Luetters, F.O.

    1980-02-01

    The Containment and Surveillance Equipment Compendium contains information sections describing the application and status of seals, optical surveillance systems, and monitors for international safeguards systems. The Compendium is a collection of information on equipment in use (generally by the IAEA) or under development in the US in diverse programs being conducted at numerous facilities under different sponsors. The Compendium establishes a baseline for the status and applications of C/S equipment and is a tool to assist in the planning of future C/S hardware development activities. The Appendix contains design concepts which can be developed to meet future goals

  15. Advantages of the synthetic technique for the conduction of short circuit tests to breakers; Ventajas de la tecnica sintetica para realizar pruebas de corto circuito a interruptores

    Energy Technology Data Exchange (ETDEWEB)

    Sibilski, Henry [Instituto Electrotecnico de Varsovia, Varsovia (Poland); Ochoa Vivanco, Ruben [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In this article the operational principle of the synthetic test is described; specifically of the current injection circuit in parallel. Its utilization in the research and development of new breaker models and its wide possibilities regarding its testing characteristics is outlined. Likewise the different tests that can be performed by means of the synthetic technique are described. Finally the importance of the synthetic tests is outlined for the development of own technology in the area of interruption equipment and emphasis is made that in industrialized countries this technique is of common practice. [Espanol] En este articulo se describe el principio de operacion de la prueba sintetica; especificamente del circuito de inyeccion de corriente en paralelo. Se destaca su utilizacion en la investigacion y desarrollo de nuevos modelos de interruptores y sus amplias posibilidades en cuanto a caracteristicas de prueba. Asimismo, se describen las diferentes pruebas que pueden realizarse mediante la tecnica sintetica. Por ultimo, se destaca la importancia de las pruebas sinteticas para el desarrollo de tecnologia propia en el area de equipos de interrupcion, y se hace notar que en paises desarrollados, esta tecnica es practica comun.

  16. Advantages of the synthetic technique for the conduction of short circuit tests to breakers; Ventajas de la tecnica sintetica para realizar pruebas de corto circuito a interruptores

    Energy Technology Data Exchange (ETDEWEB)

    Sibilski, Henry [Instituto Electrotecnico de Varsovia, Varsovia (Poland); Ochoa Vivanco, Ruben [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    In this article the operational principle of the synthetic test is described; specifically of the current injection circuit in parallel. Its utilization in the research and development of new breaker models and its wide possibilities regarding its testing characteristics is outlined. Likewise the different tests that can be performed by means of the synthetic technique are described. Finally the importance of the synthetic tests is outlined for the development of own technology in the area of interruption equipment and emphasis is made that in industrialized countries this technique is of common practice. [Espanol] En este articulo se describe el principio de operacion de la prueba sintetica; especificamente del circuito de inyeccion de corriente en paralelo. Se destaca su utilizacion en la investigacion y desarrollo de nuevos modelos de interruptores y sus amplias posibilidades en cuanto a caracteristicas de prueba. Asimismo, se describen las diferentes pruebas que pueden realizarse mediante la tecnica sintetica. Por ultimo, se destaca la importancia de las pruebas sinteticas para el desarrollo de tecnologia propia en el area de equipos de interrupcion, y se hace notar que en paises desarrollados, esta tecnica es practica comun.

  17. Nuclear medicine

    International Nuclear Information System (INIS)

    James, A.E. Jr.; Squire, L.F.

    1977-01-01

    The book presents a number of fundamental imaging principles in nuclear medicine. The fact that low radiation doses are sufficient for the study of normal and changed physiological functions of the body is an important advancement brought about by nuclear medicine. The possibility of quantitative investigations of organs and organ regions and of an assessment of their function as compared to normal values is a fascinating new diagnostic dimension. The possibility of comparing the findings with other pathological findings and of course control in the same patient lead to a dynamic continuity with many research possibilities not even recognized until now. The limits of nuclear scanning methods are presented by the imprecise structural information of the images. When scintiscans are compared with X-ray images or contrast angiography, the great difference in the imaging of anatomical details is clearly seen. But although the present pictures are not optimal, they are a great improvement on the pictures that were considered clinically valuable a few years ago. (orig./AJ) [de

  18. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to an equipment rack controller on the equipment rack. The equipment rack controllers link to a central control computer that provides an operator ...

  19. Directory of computer users in nuclear medicine

    International Nuclear Information System (INIS)

    Erickson, J.J.; Gurney, J.; McClain, W.J.

    1979-09-01

    The Directory of Computer Users in Nuclear Medicine consists primarily of detailed descriptions and indexes to these descriptions. A typical Installation Description contains the name, address, type, and size of the institution and the names of persons within the institution who can be contacted for further information. If the department has access to a central computer facility for data analysis or timesharing, the type of equipment available and the method of access to that central computer is included. The dedicated data processing equipment used by the department in its nuclear medicine studies is described, including the peripherals, languages used, modes of data collection, and other pertinent information. Following the hardware descriptions are listed the types of studies for which the data processing equipment is used, including the language(s) used, the method of output, and an estimate of the frequency of the particular study. An Installation Index and an Organ Studies Index are also included

  20. Directory of computer users in nuclear medicine

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, J.J.; Gurney, J.; McClain, W.J. (eds.)

    1979-09-01

    The Directory of Computer Users in Nuclear Medicine consists primarily of detailed descriptions and indexes to these descriptions. A typical Installation Description contains the name, address, type, and size of the institution and the names of persons within the institution who can be contacted for further information. If the department has access to a central computer facility for data analysis or timesharing, the type of equipment available and the method of access to that central computer is included. The dedicated data processing equipment used by the department in its nuclear medicine studies is described, including the peripherals, languages used, modes of data collection, and other pertinent information. Following the hardware descriptions are listed the types of studies for which the data processing equipment is used, including the language(s) used, the method of output, and an estimate of the frequency of the particular study. An Installation Index and an Organ Studies Index are also included. (PCS)

  1. Integrative Medicine in Preventive Medicine Education

    OpenAIRE

    Jani, Asim A.; Trask, Jennifer; Ali, Ather

    2015-01-01

    During 2012, the USDHHS?s Health Resources and Services Administration funded 12 accredited preventive medicine residencies to incorporate an evidence-based integrative medicine curriculum into their training programs. It also funded a national coordinating center at the American College of Preventive Medicine, known as the Integrative Medicine in Preventive Medicine Education (IMPriME) Center, to provide technical assistance to the 12 grantees. To help with this task, the IMPriME Center esta...

  2. EAS Equipment Authorization Grantee Registrations

    Data.gov (United States)

    Federal Communications Commission — EAS (Equipment Authorization System). Radio Frequency (RF) devices are required to be properly authorized under 47 CFR Part 2 prior to being marketed or imported...

  3. ENERGY STAR Certified Imaging Equipment

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Imaging Equipment that are effective as of...

  4. EMR Measurements on NDA Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Macdonell, Alexander Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Meierbachtol, Krista Cruse [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Evans, James Walter Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mayo, Douglas R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-10

    Electromagnetic radiation (EMR) emission strength measurements were performed on a suite of passive non-destructive assay (NDA) radiation detection equipment. Data were collected from 9 kHz up to 6 GHz on each of the assembled systems.

  5. Mongolia - Vocational Education - Equipment Upgrades

    Data.gov (United States)

    Millennium Challenge Corporation — Evaluation design The impact evaluation sought to identify the causal impact of exposure to equipment upgrades on subsequent outcomes. Insofar as we were not able to...

  6. Operation monitor for plant equipment

    International Nuclear Information System (INIS)

    Kondo, Tetsufumi; Kanemoto, Shigeru.

    1991-01-01

    In a nuclear power plant, states of each of equipment in the plant are monitored accurately even under such a operation condition that the power is changed. That is, the fundamental idea is based on a model comparison method. A deviation between an output signal upon normal plant state obtained in a forecasting model device and that of the objective equipment in the plant are compared with a predetermined value. The result of the comparison is inputted to an alarm device to alarm the abnormality of the states of the equipment to an operator. The device of the present invention thus constituted can monitor the abnormality of the operation of equipment accurately even under such a condition that a power level fluctuates. As a result, it can remarkably contribute to mitigate operator's monitoring operation under the condition such as during load following operation. (I.S.)

  7. Equipment improvements for performance enhancement

    International Nuclear Information System (INIS)

    Gaestel, P.; Guesnon, H.; Sauze, G.

    1994-01-01

    In order to enhance the reactor availability, several improvements on reactor equipment have been developed: design optimization for stator maintenance replacement in the main alternator; adjustment modification of stator coils in the main alternator for an easier maintenance; improvement of the fuel handling line (pole crane, transfer equipment, loading machine); development of a loose part trapping system in the steam generator secondary circuit. 1 tab

  8. Low level photoneutron detection equipment

    International Nuclear Information System (INIS)

    Ji Changsong; Zhang Yuqin; Li Yuansui

    1991-01-01

    A low level photoneutron detection equipment has been developed. The photoneutrons produced by interaction of 226 Ra gamma quanta and deutron (D) target are detected with n-n discrimination detector made up of 3 He proportional counter array. The D-content information in the target can be obtained from the measured photoneutron counts. The equipment developed is mainly used for nondestructive D-content measurement of D-devices

  9. FUSRAP equipment concept development study

    International Nuclear Information System (INIS)

    Hinerman, K.B.; Smith, R.E.

    1981-01-01

    Under DOE contract, Dalton-Dalton-Newport, Inc. is performing an engineering evaluation of three selected FUSRAP sites in an effort to generate equipment concepts to perform remedial action for retrieval, packaging, storing, and transporting contaminated soil and other debris. Along with this engineering evaluation, an analysis of state and Federal regulations was made which had significant impact on the selected equipment and costs for each remedial action concept

  10. Remotely operated replaceable process equipment

    International Nuclear Information System (INIS)

    Westendorf, H.

    1987-01-01

    The coupling process of pneumatic and electrical auxiliary lines of a pneumatic control pressure line in a large cell of the reprocessing plant is carried out, together with the coupling process of the connecting flange of the process equipment. The coupling places of the auxiliary lines, such as control or supply lines, are laid in the flange parts of the flanges to be connected. The pipe flange on the frame side remains flush with the connecting flange of the process equipment. (DG) [de

  11. Partners in qualified equipment supply

    International Nuclear Information System (INIS)

    Rygg, D.E.; O'Hare, G.J.

    1993-01-01

    Industry initiatives have been taken to improve procurement practices and commercial dedication programs, formation of procurement engineering groups, emphasis on product quality, and increased engineering involvement in procurement and maintenance of qualified equipment. This poses new challenges for many licensees in terms of resources, product knowledge, and access to information normally held proprietary by equipment suppliers. Alternative approaches to future licensee/Westinghouse relationships which will allow licensees to adapt to the changing environment are discussed. 2 figs

  12. Interpretive Medicine

    Science.gov (United States)

    Reeve, Joanne

    2010-01-01

    Patient-centredness is a core value of general practice; it is defined as the interpersonal processes that support the holistic care of individuals. To date, efforts to demonstrate their relationship to patient outcomes have been disappointing, whilst some studies suggest values may be more rhetoric than reality. Contextual issues influence the quality of patient-centred consultations, impacting on outcomes. The legitimate use of knowledge, or evidence, is a defining aspect of modern practice, and has implications for patient-centredness. Based on a critical review of the literature, on my own empirical research, and on reflections from my clinical practice, I critique current models of the use of knowledge in supporting individualised care. Evidence-Based Medicine (EBM), and its implementation within health policy as Scientific Bureaucratic Medicine (SBM), define best evidence in terms of an epistemological emphasis on scientific knowledge over clinical experience. It provides objective knowledge of disease, including quantitative estimates of the certainty of that knowledge. Whilst arguably appropriate for secondary care, involving episodic care of selected populations referred in for specialist diagnosis and treatment of disease, application to general practice can be questioned given the complex, dynamic and uncertain nature of much of the illness that is treated. I propose that general practice is better described by a model of Interpretive Medicine (IM): the critical, thoughtful, professional use of an appropriate range of knowledges in the dynamic, shared exploration and interpretation of individual illness experience, in order to support the creative capacity of individuals in maintaining their daily lives. Whilst the generation of interpreted knowledge is an essential part of daily general practice, the profession does not have an adequate framework by which this activity can be externally judged to have been done well. Drawing on theory related to the

  13. Medicinal cannabis.

    Science.gov (United States)

    Murnion, Bridin

    2015-12-01

    A number of therapeutic uses of cannabis and its derivatives have been postulated from preclinical investigations. Possible clinical indications include spasticity and pain in multiple sclerosis, cancer-associated nausea and vomiting, cancer pain and HIV neuropathy. However, evidence is limited, may reflect subjective rather than objective outcomes, and is not conclusive. Controversies lie in how to produce, supply and administer cannabinoid products. Introduction of cannabinoids therapeutically should be supported by a regulatory and educational framework that minimises the risk of harm to patients and the community. The Regulator of Medicinal Cannabis Bill 2014 is under consideration in Australia to address this. Nabiximols is the only cannabinoid on the Australian Register of Therapeutic Goods at present, although cannabidiol has been recommended for inclusion in Schedule 4.

  14. Narrativ medicin

    DEFF Research Database (Denmark)

    Hvas, Lotte; Getz, Linn

    2015-01-01

    Dagens allmänmedicin påverkas av ett växande managementtänkandetillsammans med fragmenterande ekonomiska incitament.Vårdens kvaliteter evalueras med nya metoder som ”värdebaseradvård” där värde räknas i kronor och ören. Produktion går före etik,och det intersubjektiva mötet mellan patient och läk...... läkare håller påatt nedvärderas. Perspektiven från narrativ medicin kan bidra tillatt visa vad som står på spel. Vilken blir annars berättelsen omallmänmedicinen?...

  15. 29 CFR 97.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  16. 44 CFR 13.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  17. 24 CFR 85.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  18. 41 CFR 105-71.132 - Equipment.

    Science.gov (United States)

    2010-07-01

    .... (4) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be... managing equipment (including replacement equipment), whether acquired in whole or in part with grant funds... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Equipment. 105-71.132...

  19. 43 CFR 12.72 - Equipment.

    Science.gov (United States)

    2010-10-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  20. 1968 Listing of Swimming Pool Equipment.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  1. Quality assurance in nuclear medicine

    International Nuclear Information System (INIS)

    Kaul, A.

    1986-01-01

    'Quality Assurance in Nuclear Medicine' is the title of the English language original that has been translated into German. The manual very extensively deals with quality control of nuclear medical equipment. Tests are explained for checking radioactivity measuring devices, manual and automatic in-vitro sample measuring systems, in-vivo measuring systems with single or multiple detectors, rectlinear scanners, and gamma cameras, including the phantoms required for the methods. Other chapters discuss the quality control of radiopharmaceuticals, or the quality assurance in data recording and evaluation of results. Helpful comments on the organisation of quality assurance programms are given. The book is intended as a practical guide for introducing quality assurance principles in nuclear medicine in the Federal Republic of Germany. With 13 figs., 22 tabs [de

  2. Proceedings of the forty third annual conference of Society of Nuclear Medicine India: empowering modern medicine with molecular nuclear medicine

    International Nuclear Information System (INIS)

    2011-01-01

    Theme of the 43rd Annual Conference of the Society of Nuclear Medicine India is 'empowering modem medicine with molecular nuclear medicine'. Keeping the theme in mind, the scientific committee has arranged an attractive and comprehensive program for both physicians and scientists reflecting the multimodality background of Nuclear Medicine and Metabolic Imaging. During this meeting the present status and future prospects of Nuclear medicine are discussed at length by esteemed faculty in dedicated symposia and interesting featured sessions which are immensely facilitate in educating the participants. Nuclear Medicine has come a long way since the first applications of radioiodine in the diagnosis of thyroid disease. The specialty of nuclear medicine in India is growing very rapidly. Technology continues to push the field in new directions and open new pathways for providing optimal care to patients. It is indeed an exciting time in the world of imaging and in the field of nuclear medicine. Innovative techniques in hardware and software offer advantages for enhanced accuracy. New imaging agents, equipment, and software will provide us with new opportunities to improve current practices and to introduce new technology into the clinical protocols. Papers relevant to INIS are indexed separately

  3. Medicine safety and children

    Science.gov (United States)

    ... it is candy. What to Do If Your Child Takes Medicine If you think your child has taken medicine, call the poison control center ... blood pressure monitored. Preventing Medicine Mistakes When giving medicine to your young child, follow these safety tips: Use medicine made only ...

  4. Performance monitoring of safeguards equipment

    International Nuclear Information System (INIS)

    Sirisena, K.; Peltoranta, M.; Goussarov, V.; Vodrazka, P.

    1999-01-01

    SGTCS is responsible for monitoring and reporting the performance of the SG equipment. Performance monitoring (PM) has been implemented in most important safeguards equipment operating unattended in nuclear facilities. Inspectors acquire equipment performance data in facilities. After inspection, the data package is submitted to SGTCS for processing and analysis. The performance data is used for identification of systems or components, which should be changed in the field and for identification of modules which, should be diagnosed at HQ in order to determine the cause of failure. Moreover, the performance data is used for preventive maintenance and spares distribution planning, and to provide statistics for official reports and management decision making. An important part of the performance monitoring is reporting. Equipment performance reports contain information about equipment inventory, utilization, failure types, failure distribution, and reliability. Trends in performance are given in graphical form in cases, where past data is available. Reliability estimates such as expected times between failures are provided. The automated reporting tools are obtainable through EMIS database application. (author)

  5. AVM branch vibration test equipment

    International Nuclear Information System (INIS)

    Anne, J.P.

    1995-01-01

    An inventory of the test equipment of the AVM Branch ''Acoustic and Vibratory Mechanics Analysis Methods'' group has been undertaken. The purpose of this inventory is to enable better acquaintance with the technical characteristics of the equipment, providing an accurate definition of their functionalities, ad to inform potential users of the possibilities and equipment available in this field. The report first summarizes the various experimental surveys conduced. Then, using the AVM equipment database to draw up an exhaustive list of available equipment, it provides a full-scope picture of the vibration measurement systems (sensors, conditioners and exciters) and data processing resources commonly used on industrial sites and in laboratories. A definition is also given of a mobile test unit, called 'shelter', and a test bench used for the testing and performance rating of the experimental analysis methods developed by the group. The report concludes with a description of two fixed installations: - the calibration bench ensuring the requisite quality level for the vibration measurement systems ; - the training bench, whereby know-how acquired in the field in the field of measurement and experimental analysis processes is made available to others. (author). 27 refs., 15 figs., 2 appends

  6. 78 FR 25916 - Authorization of Radiofrequency Equipment

    Science.gov (United States)

    2013-05-03

    ...] Authorization of Radiofrequency Equipment AGENCY: Federal Communications Commission. ACTION: Proposed rule... bodies, and measurement procedures used to determine RF equipment compliance. The Commission believes... Commission is responsible for an equipment authorization program for radiofrequency (RF) devices under part 2...

  7. Nuclear medicine in the Philippines

    International Nuclear Information System (INIS)

    Villadolid, Leland.

    1978-01-01

    This article traces the history of nuclear medicine in the country from the time the first radioisotope laboratory was set up by the Philippine General Hospital about 1955, to the not too satisfactory present facilities acquired by hospitals for diagnosis, treatment and investigation of diseases. It is in research, the investigation of disease that is nuclear medicine's most important area. The Philippine Atomic Energy Commission (PAEC) has pioneered in the conducting of courses in the medical uses of radioisotopes. The local training of nuclear manpower has been continued and updated and foreign fellowships are availed of through the cooperation of IAEA. Quite a number are already trained also in the allied fields that support the practice of nuclear medicine. However the brain drain has seriously affected the number of trained staff of medical units. Discussed and presented is the growth of the medical use of radioisotopes which are locally produced by PAEC. In order to benefit from the full advantage that nuclear medicine can do to a majority of Filipinos, the government should extend its financial support in acquiring such facilities to equip strategic hospitals in the country and support training programs. The Philippine has the expertise to start the expansion but only with adequate provision of funds will our capacity turn into reality. (RTD)

  8. Medicine organizer

    Science.gov (United States)

    Martins, Ricardo; Belchior, Ismael

    2015-04-01

    In the last year of secondary school, students studying physics and chemistry are incentivized to do a project where they must put in practice their improvement of scientific knowledge and skills, like observation of phenomena and analysis of data with scientific knowledge. In this project a group of students, tutored by the teacher, wanted to build an instrument that helps people to take their medical drugs at the right time. This instrument must have some compartments with an alarm and an LED light where the people can put their medical drugs. The instrument must be easily programed using an android program that also registers if the medicine has been taken. The students needed to simulate the hardware and software, draw the electronic system and build the final product. At the end of the school year, a public oral presentation was prepared by each group of students and presented to the school community. They are also encouraged to participate in national and international scientific shows and competitions.

  9. Research medicine

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    In Section I of this annual report, a brief summary of work is presented by the Research Medicine Group. The major emphasis has been the study of the blood system in man with a special emphasis on the examination of platelet abnormalities in human disease. New programs of major importance include the study of aging or dementia of the Alzheimer's type. A differential diagnosis technique has been perfected using positron emission tomography. Studies on the biochemical basis of schizophrenia have proceeded using radioisotope studies which image physiological and biochemical processes. In the investigation of atherosclerosis, techniques have been developed to measure blood perfusion of the heart muscle by labelling platelets and lipoproteins. Progress is reported in a new program which uses NMR for both imaging and spectroscopic studies in humans. The group has determined through an epidemiological study that bubble chamber and cyclotron workers who have been exposed to high electromagnetic fields for two decades have no significant increases in the prevalence of 21 diseases as compared with controls

  10. Some aspects of the development of nuclear medicine in the USSR

    International Nuclear Information System (INIS)

    Kasatkin, Yu.N.

    1989-01-01

    Principle directions of the development of nuclear medicine in the USSR are presented.Some problems, which solution affects the state of nuclear medicine in the country are discussed. Problems of technical equipment of nuclear-diagnostic investigations are considered. Measures, directed to improvement of proffesional traing of specialists dealing with nuclear medicine are planned

  11. Another donation of computer equipment

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On Thursday 27 February, CERN was pleased to donate computer equipment to a physics institute in the Philippines.   H.E. Leslie J. Baja and Rolf Heuer. Following donations of computer equipment to institutes in Morocco, Ghana, Bulgaria, Serbia and Egypt, CERN is to send 50 servers and 4 network switches to the National Institute of Physics at the University of the Philippines Diliman. CERN’s Director-General Rolf Heuer and the Ambassador of the Philippines to Switzerland and Lichtenstein, H.E. Leslie J. Baja, spoke of their enthusiasm for the project during an official ceremony. The equipment will be used for various high energy physics research programmes in the Philippines and for the University’s development of digital resources for science.

  12. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  13. The development of superconducting equipment

    CERN Document Server

    Ueda, T; Hiue, H

    2003-01-01

    Fuji Electric has been developing various types of superconducting equipment for over a quarter of a century. This paper describes the development results achieved for superconducting equipment and especially focuses on large-capacity current leads and superconducting transmission systems, the development of which is being promoted for application to the field of nuclear fusion. High temperature superconductor (HTS) is becoming the mainstream in the field of superconductivity, and the HTS floating coil and conduction-cooled HTS transformed are also introduced as recent developments for devices that utilize this technology. (author)

  14. Mechanical (turbines and auxiliary equipment)

    CERN Document Server

    Sherry, A; Cruddace, AE

    2013-01-01

    Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

  15. Cough & Cold Medicine Abuse

    Science.gov (United States)

    ... Videos for Educators Search English Español Cough & Cold Medicine Abuse KidsHealth / For Teens / Cough & Cold Medicine Abuse ... resfriado Why Do People Use Cough and Cold Medicines to Get High? There's an ingredient in many ...

  16. Complementary and Integrative Medicine

    Science.gov (United States)

    ... medical treatments that are not part of mainstream medicine. When you are using these types of care, it may be called complementary, integrative, or alternative medicine. Complementary medicine is used together with mainstream medical ...

  17. Depression - stopping your medicines

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000570.htm Depression - stopping your medicines To use the sharing features ... prescription medicines you may take to help with depression, anxiety, or pain. Like any medicine, there are ...

  18. Cold medicines and children

    Science.gov (United States)

    ... ingredient. Avoid giving more than one OTC cold medicine to your child. It may cause an overdose with severe side ... the dosage instructions strictly while giving an OTC medicine to your child. When giving OTC cold medicines to your child: ...

  19. Traveling Safely with Medicines

    Science.gov (United States)

    ... Medications Safely My Medicine List How to Administer Traveling Safely with Medicines Planes, trains, cars – even boats ... your trip, ask your pharmacist about how to travel safely with your medicines. Make sure that you ...

  20. Ventajas del uso de la inyección electrónica en Cuba para vehículos diesel ligeros. // Advantages of injection electronic control systems for cars with Diesel engines.

    Directory of Open Access Journals (Sweden)

    J. L. Reyes González

    2002-05-01

    Full Text Available Se presenta un análisis sobre las ventajas que brinda el control electrónico en la inyección Diesel en vehículos ligeros enfunción de las condiciones de clima y explotación en nuestro país. En nuestro trabajo se hace un análisis experimental y sedemuestra la influencia notable que presenta esta novedosa técnica en la contaminación ambiental y el consumo decombustible.Palabras claves: Inyección Diesel, control electrónico, contaminación ambiental, gases de escape.______________________________________________________________________Abstract.This paper deals with the advantages of the electronic control systems in Diesel engines in cars, taking intoconsideration the weather and exploitation conditions in our country. The experimental analysis shows the influence ofelectronic injections systems in the fuel consumption and the environmental impact of the exhaust gases.Key words: Diesel inyection, electronic control, ambiental pollution, exhaust gases.

  1. Compulsory equal opportunities plans: Advantages of equal opportunities between women and men for companies Planes de igualdad por ley: Ventajas de la igualdad de oportunidades entre mujeres y hombres para las empresas

    Directory of Open Access Journals (Sweden)

    Marta Tura-Solvas

    2009-04-01

    Full Text Available The Equal Opportunities Spanish Law (from 2007, establishes that those companies with more than 250 workers have to design and implement an equal opportunities plan between women and men. Since the “cost-benefit” relation of equal opportunities has not been yet studied, companies have to convince themselves about the convenience of designing and adopting an equal opportunities plan by means of non quantitative reasons. In this paper the main advantages of equal opportunities for companies are discussed, and some criteria are offered for its application.La Ley de Igualdad Efectiva de mujeres y hombres, aprobada en España en 2007, establece la obligatoriedad de elaborar e implantar planes de igualdad de oportunidades a aquellas empresas con más de 250 trabajadores. La relación “coste-beneficio” de la igualdad de oportunidades (relación entre el nivel de igualdad de oportunidades en una empresa y sus resultados es un tema que no ha sido aún explorado y, por ello, las empresas deben autoconvencerse de la conveniencia de implantar planes de igualdad por medio de argumentos no cuantitativos. En este artículo se discuten las principales ventajas que puede ofrecer a las empresas la igualdad de oportunidades entre mujeres y hombres y se ofrecen criterios y herramientas para su aplicación.

  2. Ethnoveterinary Medicine: The prospects of integrating medicinal ...

    African Journals Online (AJOL)

    Medicinal plants products are part of the natural products that have been in use in traditional medicine and also a source of novel drugs. Therefore, the use of medicinal plant products would be a rational alternative to synthetic drugs. Ethnobotanical surveys carried out in many parts of Kenya have revealed a lot of plants ...

  3. Calculation of an analytical memory for the installation of a PET-CT equipment in the Nuclear Medicine Department of the National Institute of Cancerology; Calculo de una memoria analitica para la instalacion de un equipo PET-CT en el Departamento de Medicina Nuclear del Instituto Nacional de Cancerologia

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo Z, F.E.; Gomez A, E. [Instituto Nacional de Cancerologia, Departamento de Medicina Nuclear, 14000 Mexico D.F. (Mexico)

    2007-07-01

    The studies with a PET-CT equipment combines the metabolic information that provides the Positron Emission Tomography technique (PET), with the morphological data offered by the Computerized Tomography (CT). In Mexico, it will have the first PET-CT equipment, for a public service hospital. Since that makes use of radioactive material (emission of annihilation photons with 511 keV) and X rays, is necessary to calculate the necessary shielding for the PET-CT equipment room and for the area where it is managed or have presence of radioactive material (mainly fluorodeoxyglucose labelled with F-18, i.e. FDG-F18). It is presented a summary of the calculations and necessary considerations so that the shielding allows to fulfill with the official doses limits in Mexico (50 mSv/year for Occupationally Exposure Personnel, OEP and 5 mSv/year for public in general), taking into account the adjacent areas to the installation. It is concluded with the shielding thickness required for the walls and roof of the installation, having a maximum of 20 cm of concrete ({rho} = 2.35 g/cm{sup 3}) for the administration room of radioactive material to the patients and a minimum of 1 mm of lead for the room of the PET-CT equipment, having taken into account the dimensions of each area. (Author)

  4. Obstetric medicine

    Directory of Open Access Journals (Sweden)

    L. Balbi

    2013-05-01

    Full Text Available BACKGROUND Obstetric assistance made major advances in the last 20 years: improved surgical technique allows quicker caesarean sections, anaesthesiology procedures such as peripheral anaesthesia and epidural analgesia made safer operative assistance, remarkably reducing perioperative morbidity and mortality, neonatology greatly improved the results of assistance to low birth weight newborns. A new branch of medicine called “obstetric medicine” gained interest and experience after the lessons of distinguished physicians like Michael De Swiet in England. All together these advances are making successful pregnancies that 20 years ago would have been discouraged or even interrupted: that’s what we call high risk pregnancy. High risk of what? Either complications of pregnancy on pre-existing disease or complications of pre-existing disease on pregnancy. Nowadays, mortality in pregnancy has a medical cause in 80% of cases in Western countries (Confidential Enquiry on Maternal Deaths, UK, 2004. DISCUSSION The background is always changing and we have to take in account of: increase of maternal age; widespread use of assisted fertilization techniques for treatment of infertility; social feelings about maternity desire with increasing expectations from medical assistance; immigration of medically “naive” patients who don’t know to have a chronic disease, but apt and ready to conceive; limited knowledge of feasibility of drug use in pregnancy which may induce both patients and doctors to stopping appropriate drug therapy in condition of severe disease. Preconception counseling, planning the pregnancy, wise use of drugs, regular follow-up throughout the pregnancy and, in selected cases, preterm elective termination of pregnancy may result in excellent outcome both for mother and foetus. CONCLUSIONS Highly committed and specifically trained physicians are required to counsel these patients and to plan their treatment before and during pregnancy.

  5. Medicines for sleep

    Science.gov (United States)

    Benzodiazepines; Sedatives; Hypnotics; Sleeping pills; Insomnia - medicines; Sleep disorder - medicines ... are commonly used to treat allergies. While these sleep aids are not addictive, your body becomes used ...

  6. Damage limits of accelerator equipment

    CERN Document Server

    Rosell, Gemma

    2014-01-01

    Beam losses occur in particle accelerators for various reasons. The effect of lost particles on accelerator equipment becomes more severe with the increasing energies and intensities. The present study is focused on the damage potential of the proton beam as a function of particle energy and beam size. Injection and extraction energies of different accelerators at CERN were considered.

  7. Pocket dictionary of laboratory equipment

    International Nuclear Information System (INIS)

    Junge, H.D.

    1987-01-01

    This pocket dictionary contains the 2500 most common terms for scientific and technical equipment in chemical laboratories. It is a useful tool for those who are used to communicating in German and English, but have to learn the special terminology in this field. (orig.) [de

  8. Using Gaming Equipment to Teach

    Science.gov (United States)

    Curriculum Review, 2009

    2009-01-01

    Gaming equipment (such as Nintendo's Wii[TM]) is making its way to schools and classrooms. However, most of the discussion regarding how to use this technology and integrate it into lesson plans is happening in blogs on the Internet. An advocate of interactive media in the classroom, Dr. Dawn Hawkins, a faculty member for the Art Institute of…

  9. Isotope-equipped measuring instruments

    International Nuclear Information System (INIS)

    Miyagawa, Kazuo; Amano, Hiroshi

    1980-01-01

    In the steel industry, though the investment in isotope-equipped measuring instruments is small as compared with that in machinery, they play important role in the moisture measurement in sintering and blast furnaces, the thickness measurement in rolling process and others in automatic control systems. The economic aspect of the isotope-equipped measuring instruments is described on the basis of the practices in Kimitsu Works of Nippon Steel Corporation: distribution of such instruments, evaluation of economic effects, usefulness evaluation in view of raising the accuracy, and usefulness evaluation viewed from the failure of the isotope instruments. The evaluation of economic effects was made under the premise that the isotope-equipped measuring instruments are not employed. Then, the effects of raising the accuracy are evaluated for a γ-ray plate thickness gauge and a neutron moisture gauge for coke in a blast furnace. Finally, the usefulness was evaluated, assuming possible failure of the isotope-equipped measuring instruments. (J.P.N.)

  10. Hydraulic turbines and auxiliary equipment

    Energy Technology Data Exchange (ETDEWEB)

    Luo Gaorong [Organization of the United Nations, Beijing (China). International Centre of Small Hydroelectric Power Plants

    1995-07-01

    This document presents a general overview on hydraulic turbines and auxiliary equipment, emphasizing the turbine classification, in accordance with the different types of turbines, standard turbine series in China, turbine selection based on the basic data required for the preliminary design, general hill model curves, chart of turbine series and the arrangement of application for hydraulic turbines, hydraulic turbine testing, and speed regulating device.

  11. Radiosanitary control in nuclear medicine

    International Nuclear Information System (INIS)

    Degrossi, O.J.

    1987-01-01

    Nuclear Medicine has recently modified radiosanitary control standards for the three sectors involved: patients, personnel and general population. Nuclear Medicine does not constitute an important source of radiation, including patients and population, compared with radiology. The basic problems of radiosanitary controls are: the absorbed dose and the patient. Low risk deferred stochastic effects may appear with correct use of these controls. On the other hand, risk of stochastic consequences and non stochastic complications appear with incorrect applications. The following aspects should be considered for correct uses: A-1- The critical organ, which is not always the one under study. 2-The rest of the organism, specially the more sensitive organs. B- The radiopharmaceutical used, considering the following periods: physical, biological and effective. C-Technical and human resources that include quality control for the equipment. Radiosanitary control aims at a common objetive: dose limitation to the patient, personnel and general population. For this, it is necessary to accomplish the training programme for proffesional and technical personnel about quality control and to stablish basic standards for the equipment. Current law and regulations assign to the National Atomic Energy Comission the responsibility for controlling the use of radioisotopes and radiations in order to safeguard the health and life of the population. (M.E.L.) [es

  12. A Study on Performance and Safety Tests of Electrosurgical Equipment.

    Science.gov (United States)

    Tavakoli Golpaygani, A; Movahedi, M M; Reza, M

    2016-09-01

    Modern medicine employs a wide variety of instruments with different physiological effects and measurements. Periodic verifications are routinely used in legal metrology for industrial measuring instruments. The correct operation of electrosurgical generators is essential to ensure patient's safety and management of the risks associated with the use of high and low frequency electrical currents on human body. The metrological reliability of 20 electrosurgical equipment in six hospitals (3 private and 3 public) was evaluated in one of the provinces of Iran according to international and national standards. The achieved results show that HF leakage current of ground-referenced generators are more than isolated generators and the power analysis of only eight units delivered acceptable output values and the precision in the output power measurements was low. Results indicate a need for new and severe regulations on periodic performance verifications and medical equipment quality control program especially in high risk instruments. It is also necessary to provide training courses for operating staff in the field of meterology in medicine to be acquianted with critical parameters to get accuracy results with operation room equipment.

  13. A Study on Performance and Safety Tests of Electrosurgical Equipment

    Directory of Open Access Journals (Sweden)

    Tavakoli Golpaygani A.

    2016-09-01

    Full Text Available Introduction: Modern medicine employs a wide variety of instruments with different physiological effects and measurements. Periodic verifications are routinely used in legal metrology for industrial measuring instruments. The correct operation of electrosurgical generators is essential to ensure patient’s safety and management of the risks associated with the use of high and low frequency electrical currents on human body. Material and Methods: The metrological reliability of 20 electrosurgical equipment in six hospitals (3 private and 3 public was evaluated in one of the provinces of Iran according to international and national standards. Results: The achieved results show that HF leakage current of ground-referenced generators are more than isolated generators and the power analysis of only eight units delivered acceptable output values and the precision in the output power measurements was low. Conclusion: Results indicate a need for new and severe regulations on periodic performance verifications and medical equipment quality control program especially in high risk instruments. It is also necessary to provide training courses for operating staff in the field of meterology in medicine to be acquianted with critical parameters to get accuracy results with operation room equipment.

  14. Alternative Fuels Data Center: Biodiesel Equipment Options

    Science.gov (United States)

    Equipment Options to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Equipment Options on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Equipment Options on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Equipment Options on Google Bookmark Alternative Fuels

  15. 40 CFR 792.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Equipment design. 792.61 Section 792.61...) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  16. 40 CFR 160.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  17. 21 CFR 58.61 - Equipment design.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Equipment design. 58.61 Section 58.61 Food and... PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  18. 34 CFR 74.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... as program income. (e) When acquiring replacement equipment, the recipient may use the equipment to... replacement equipment subject to the approval of the Secretary. (f) The recipient's property management... 34 Education 1 2010-07-01 2010-07-01 false Equipment. 74.34 Section 74.34 Education Office of the...

  19. 20 CFR 437.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use.... Procedures for managing equipment (including replacement equipment), whether acquired in whole or in part... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Equipment. 437.32 Section 437.32 Employees...

  20. 45 CFR 2541.320 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... replacement equipment, the grantee or subgrantee may use the equipment to be replaced as a trade-in or sell... replacement equipment), whether acquired in whole or in part with grant funds, until disposition takes place... ensure the highest possible return. (e) Disposition. When original or replacement equipment acquired...

  1. 45 CFR 1174.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use... requirements. Procedures for managing equipment (including replacement equipment), whether acquired in whole or... original or replacement equipment acquired under a grant or subgrant is no longer needed for the original...

  2. 45 CFR 1157.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use... requirements. Procedures for managing equipment (including replacement equipment), whether acquired in whole or... original or replacement equipment acquired under a grant or subgrant is no longer needed for the original...

  3. The Cost of Maintaining Educational Communications Equipment.

    Science.gov (United States)

    Humphrey, David A.

    Tentative formulas for calculating the cost of maintaining educational communications equipment are proposed. The formulas are based on a survey of campuses of the State University of New York. The survey analyzed the types of equipment to be maintained, types of maintenance, who uses the equipment, who services the equipment, and the cost…

  4. Nuclear medicine quality assurance program in Argentina

    International Nuclear Information System (INIS)

    Levi de Cabrejas, Mariana; Arashiro, Jorge G.; Giannone, Carlos A.

    1999-01-01

    A two steps program has been implemented: the first one is the quality control of the equipment and the second one the development of standard procedures for clinical studies of patients. A training program for doctors and technicians of the nuclear medicine laboratories was carried out. Workshops on instrumentation and quality assurance in nuclear medicine have been organized in several parts of the country. A joint program of the CNEA and the University of Buenos Aires has trained medical physicists. A method has been established to evaluate the capability of the laboratories to produce high quality images and to follow up the implementation of the quality control program

  5. TRADITIONAL CHINESE HERBAL MEDICINE

    NARCIS (Netherlands)

    ZHU, YP; WOERDENBAG, HJ

    1995-01-01

    Herbal medicine, acupuncture and moxibustion, and massage and the three major constituent parts of traditional Chinese medicine. Although acupuncture is well known in many Western countries, Chinese herbal medicine, the mos important part of traditional Chinese medicine, is less well known in the

  6. Maintenance of nuclear medicine instruments

    Energy Technology Data Exchange (ETDEWEB)

    Ambro, P

    1993-12-31

    Maintenance of instruments is generally of two kinds: (a) corrective maintenance, on a non-scheduled basis, to restore equipment to a functional status by repairs; (b) preventive maintenance, to keep equipment in a specified functional condition by providing systematic inspection, quality control, detection and correction of early malfunctions. Most of the instruments used in nuclear medicine are rather complex systems built from mechanical, electrical and electronic parts. Any one of these components is liable to fail at some time or other. Repair could be done only by a specialist who is able to evaluate the condition of the various parts ranging from cables to connectors, from scintillators to photomultipliers, from microprocessors to microswitches. The knowledge of the intricacies of the various electronic components required for their repairs is quite wide and varied. The electronics industry turns out more and more multi-purpose chips which can carry out the functions of many parts used in the instruments of the earlier generation. This provides protection against unauthorized copying of the circuits but it serves another purpose as well of inhibiting repairs by non-factory personnel. These trends of the instrument design should be taken into consideration when a policy has to be developed for the repairs of the hospital based equipment 1 fig., 1 tab

  7. Maintenance of nuclear medicine instruments

    International Nuclear Information System (INIS)

    Ambro, P.

    1992-01-01

    Maintenance of instruments is generally of two kinds: (a) corrective maintenance, on a non-scheduled basis, to restore equipment to a functional status by repairs; (b) preventive maintenance, to keep equipment in a specified functional condition by providing systematic inspection, quality control, detection and correction of early malfunctions. Most of the instruments used in nuclear medicine are rather complex systems built from mechanical, electrical and electronic parts. Any one of these components is liable to fail at some time or other. Repair could be done only by a specialist who is able to evaluate the condition of the various parts ranging from cables to connectors, from scintillators to photomultipliers, from microprocessors to microswitches. The knowledge of the intricacies of the various electronic components required for their repairs is quite wide and varied. The electronics industry turns out more and more multi-purpose chips which can carry out the functions of many parts used in the instruments of the earlier generation. This provides protection against unauthorized copying of the circuits but it serves another purpose as well of inhibiting repairs by non-factory personnel. These trends of the instrument design should be taken into consideration when a policy has to be developed for the repairs of the hospital based equipment

  8. Integrative Medicine in Preventive Medicine Education

    Science.gov (United States)

    Jani, Asim A.; Trask, Jennifer; Ali, Ather

    2016-01-01

    During 2012, the USDHHS’s Health Resources and Services Administration funded 12 accredited preventive medicine residencies to incorporate an evidence-based integrative medicine curriculum into their training programs. It also funded a national coordinating center at the American College of Preventive Medicine, known as the Integrative Medicine in Preventive Medicine Education (IMPriME) Center, to provide technical assistance to the 12 grantees. To help with this task, the IMPriME Center established a multidisciplinary steering committee, versed in integrative medicine, whose primary aim was to develop integrative medicine core competencies for incorporation into preventive medicine graduate medical education training. The competency development process was informed by central integrative medicine definitions and principles, preventive medicine’s dual role in clinical and population-based prevention, and the burgeoning evidence base of integrative medicine. The steering committee considered an interdisciplinary integrative medicine contextual framework guided by several themes related to workforce development and population health. A list of nine competencies, mapped to the six general domains of competence approved by the Accreditation Council of Graduate Medical Education, was operationalized through an iterative exercise with the 12 grantees in a process that included mapping each site’s competency and curriculum products to the core competencies. The competencies, along with central curricular components informed by grantees’ work presented elsewhere in this supplement, are outlined as a roadmap for residency programs aiming to incorporate integrative medicine content into their curricula. This set of competencies adds to the larger efforts of the IMPriME initiative to facilitate and enhance further curriculum development and implementation by not only the current grantees but other stakeholders in graduate medical education around integrative medicine

  9. [Equipment and technology in robotics].

    Science.gov (United States)

    Murphy, Declan; Challacombe, Ben; Nedas, Tim; Elhage, Oussama; Althoefer, Kaspar; Seneviratne, Lakmal; Dasgupta, Prokar

    2007-05-01

    We review the evolution and current status of robotic equipment and technology in urology. We also describe future developments in the key areas of virtual reality simulation, mechatronics and nanorobotics. The history of robotic technology is reviewed and put into the context of current systems. Experts in the associated fields of nanorobotics, mechatronics and virtual reality simulation simulation review the important future developments in these areas.

  10. Remote handling equipment for SNS

    International Nuclear Information System (INIS)

    Poulten, B.H.

    1983-01-01

    This report gives information on the areas of the SNS, facility which become highly radioactive preventing hands-on maintenance. Levels of activity are sufficiently high in the Target Station Area of the SNS, especially under fault conditions, to warrant reactor technology to be used in the design of the water, drainage and ventilation systems. These problems, together with the type of remote handling equipment required in the SNS, are discussed

  11. Margins related to equipment design

    International Nuclear Information System (INIS)

    Devos, J.

    1994-01-01

    Safety margins related to design of reactor equipment are defined according to safety regulations. Advanced best estimate methods are proposed including some examples which were computed and compared to experimental results. Best estimate methods require greater computation effort and more material data but give better variable accuracy and need careful experimental validation. Simplified methods compared to the previous are less sensitive to material data, sometimes are more accurate but very long to elaborate

  12. Temperature radiation measuring equipment. Temperaturstrahlungsmessgeraet

    Energy Technology Data Exchange (ETDEWEB)

    Lotzer, W

    1981-01-22

    The invention is concerned with a temperature radiation measuring equipment for non-contact temperature measurement by the light intensity variation method, with a photoelectric resistance as the measuring element. By having a circuit with a transistor, the 'dark resistance' occurring in the course of time is compensated for and thus gives a genuine reading (ie. the voltage drop across the photoelectric resistance remains constant).

  13. CERN computing equipment for Senegal

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On 26 May, CERN once again had the honour of donating computing equipment to a foreign institute.   This time, around 100 servers and five network hubs were sent to Senegal, making it the seventh country, after Morocco, Ghana, Bulgaria, Serbia, Egypt and the Philippines, to receive a donation of computing equipment from the Organization. The official ceremony was held at CERN on 26 May in the presence of the Director-General, Rolf Heuer, and Senegal's ambassador to Geneva, Fodé Seck, who both expressed their enthusiasm for the project. The equipment is intended for Cheikh Anta Diop University (UCAD) in Dakar and will be of particular use to students attending the African School of Fundamental Physics and its Applications (ASP 2014) taking place from 3 to 23 August, for which CERN is a partner. The ASP allows a large number of African students to hone their skills in high-energy physics and to forge professional links with fellow physicists in Africa and Europe. ...

  14. JCE Online: Equipment Buyers Guide

    Science.gov (United States)

    Holmes, Jon L.

    1999-01-01

    The Equipment Buyers Guide was edited by Jo Rita Jordan. The new Equipment Buyers Guide, bound into the back of this issue, is also a new resource of JCE Internet. This resource provides an online source for the information contained in the printed guide. Placing this information online allows us to regularly update it and to provide live links to the suppliers' WWW sites. The organization of the online version parallels that of the print version. There is an alphabetical list of suppliers and a categorical listing. Links to these lists are provided on every page in the left-hand navigation bar. To quickly find information about a particular supplier, you click Supplier List, click the letter that begins the supplier's name, and scroll through the list to find the supplier. To find which suppliers provide a particular type of instrument or equipment, use the Categories link; click the category of the equipment you are looking for and then click the link to a supplier. You will then be taken to an alphabetical supplier listing page where you can scroll until you find the particular supplier of the item for which you are looking. Once you have found a supplier, the online Equipment Buyers Guide gives you the traditional contact information. But in addition, you also get one-click access to the WWW sites of the suppliers that have them. Depending on the site, you should be able to find information about the items that you seek and may even be able to order the items online! We think that you will find the online version of the Equipment Buyers Guide useful. To make it more useful, please send your suggestions, any errors or omissions you find, and any additional categories to the editor at jjordan@world.std.com The online Equipment Buyers Guide can be found at JCE Online at http://JChemEd.chem.wisc.edu/JCEWWW/Resources/EBG/ JCE Online in '99 JCE Online is your online source of "all things JCE". In order to provide you with an even more useful online resource, JCE

  15. Division of Scientific Equipment - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2002-01-01

    Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: * designs of devices and equipment for experiments in physics; their mechanical construction and assembly. In particular, these are vacuum chambers and installations for HV and UHV;* maintenance and upgrading of the existing installations and equipment in our Institute; * participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and an A0 plotter, which allow us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop offers a wide range of machining and treatment methods with satisfactory tolerances and surface quality. They include: * turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc type elements of a diameter up to 600 mm and a length not exceeding 300 mm, * milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm, * grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm, * drilling - holes of a diameter up to 50 mm, * welding - electrical and gas welding, including TIG vacuum-tight welding, * soft and hard soldering, * mechanical works including precision engineering, * plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides, * painting - paint spraying with possibility of using furnace-fired drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop is equipped with the CNC milling machine which can be used for machining of work pieces up to 500 kg. The machine

  16. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  17. Data center equipment location and monitoring system

    DEFF Research Database (Denmark)

    2011-01-01

    A data center equipment location system includes both hardware and software to provide for location, monitoring, security and identification of servers and other equipment in equipment racks. The system provides a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to a equipment rack controller on the equipment rack. The equipment rack controllers then link over a local area network to a central control computer. The central control computer provides an operator interface......, and runs a software application program that communicates with the equipment rack controllers. The software application program of the central control computer stores IDs of the equipment rack controllers and each of its connected electronic ID tags in a database.; The software application program...

  18. Overexposure of patients due to malfunctions or defects in radiation equipment

    International Nuclear Information System (INIS)

    Gill, J.R.

    1992-01-01

    Some 38 incidents involving patient overexposure due to malfunctions or defects in radiation equipment were notified to HSE between 1986 and 1990. Of these cases, 30 involved diagnostic X ray equipment, while the remainder involved nuclear medicine or radiotherapy equipment. Those cases involving X ray equipment are examined in detail and grouped into six categories. The numbers of patients affected varied. In one case an estimated 350 patients were affected: in another, 240; while 13 cases affected only a single patient. A very rough estimate of the collective effective dose equivalent in the 30 cases comes to 5 man sieverts. It is concluded that improvements are needed in fault finding procedures, and guidance is needed on consistent methods of dose estimation and reporting. Improvements for the longer term include the selection of reliable components during manufacture; application of HSE guidance in software design for programmable electronic systems; and equipment design to incorporate fault detection and inhibition of operation to prevent excessive exposures

  19. Lists A and B of X-ray equipment. As of July 1, 1984

    International Nuclear Information System (INIS)

    1984-01-01

    The lists A and B of X-ray equipment present the guidelines for X-ray device, as of December 10, 1983, that are defined in the guidelines for radiology and nuclear medicine of the Federal Association of Panel Doctors. In list A, the equipment categories of up-to-date, commercially available X-ray device are given, whereas list B classifies older equipment, both types available from manufacturers who are members of the ZVEI association. Since the categories of application II and III have been made, specifiying the equipment still in use and applicable within a given transitional period in existing medical establishments, but which may not be applied in new establishments. The list of manufacturers gives the addresses of the firms supplying the equipment described in Lists A and B, which have been compiled according to the requirements set by the Federal Association of Panel Doctors. (orig.) [de

  20. Guidelines in electrodiagnostic medicine. American Association of Electrodiagnostic Medicine.

    Science.gov (United States)

    1992-02-01

    The American Association of Electrodiagnostic Medicine (AAEM) is committed to the development of sound and clinically relevant guidelines through review of literature, expert opinion and consensus. In 1979, with the assistance of its Professional Practice Committee and association leaders, the association published its initial guidelines, Guidelines in Electrodiagnostic Medicine, covering the practice of electrodiagnostic medicine. The committee is charged with ongoing revision of the document, as needed, and the current version includes standards of practice in clinical electromyography, risks in electrodiagnostic medicine, basic equipment requirements, and the role of paramedical support. In 1988, Educational Guidelines for Electrodiagnostic Training Programs (Appendix A) was prepared by the AAEM Training Program Committee and added to aid training program directors in establishing new training programs or in reviewing the current status of the educational aspects of existing programs. In 1986, the AAEM charged its Quality Assurance Committee with the responsibility for the development of guidelines pertinent to electrodiagnostic medical consultations. The impetus for the charge was the requests received from members of the AAEM and other interested parties for educational material on indications for and conduct of electrodiagnostic medical consultations. As a result of the committee's efforts, Suggested Guidelines for Electrodiagnostic Medical Consultations (Appendix D), was published in 1989 and additional sections added subsequently. The current document includes (1) general indications for an electrodiagnostic medical consultation for patients with suspected myopathies, neuromuscular junction disorders, polyneuropathies, mononeuropathies, plexopathies, radiculopathies, neuronopathies and central nervous system disorders, (2) specific indications for patients with suspected lumbosacral or cervical radiculopathies, (3) general principles of electrodiagnostic

  1. The application of nuclear-medicine methods in veterinary medicine

    International Nuclear Information System (INIS)

    Simpraga, M.; Kraljevic, P.; Dodig, D.

    1996-01-01

    X-radiography and ultrasound imaging are well established and widely used in veterinary practice, but it is not the same situation with radioisotope imaging. In veterinary practice the above mentioned methods of nuclear medicine are developed only in two countries in Europe. That is not doubt due, so bar, to the difficulties in obtaining satisfactory supply of radioisotopes and to the relatively high cost of scanning equipment. However, in collaboration with the Department of Radiation Protection and Nuclear Medicine of the Medical Faculty in Zagreb, Croatia, we have chance to develop the use of those methods in clinical veterinary practice in Zagreb. That is way in this paper an overview of the application of radioisotopes imaging in veterinary medicine is given. In small animals skeletal changes, lung perusions, brain lesions, space occupying lesions in the liver and its function and hearth function can be usefully searched by a gamma camera and its associated computer. In equine practice scintigraphy of bones, liver, hearth, pulmonary circulation and ventilation is described. The largest amount of radioactive material is used during gamma camera scanning of the skeletons of horses. In this cases the radiation dose 1-2 m from the animal is approximately 3 μSv/h. That is why the protection of personal involved in radioisotope scanning in veterinary medicine must be also regulated by low of radiation protection. Also, the animals should be confined to a controlled area for 2-3 days after scanning before being returned to their owners. After this period the area must be cleaned. (author)

  2. Quality and safety based management of radiological and clinical equipment

    International Nuclear Information System (INIS)

    Arora, S.; Saini, P.S.

    2001-01-01

    TQM (Total quality management) is the 'buzz' acronym expected in almost every aspect of industrial manufacturing, product development and services solicited by the outside agencies. The correct management of the many technological resources in health institutions in terms of efficiency, effectiveness and safety is a necessity in view of the criteria on which modern medicine is based. Almost all activities -be they diagnostic, therapeutic and rehabilitative - carried out within a modern hospital are based on widespread application of equipment and technology, the efficiency of which can directly influence the quality of service offered to the patient

  3. VENTAJAS Y DESVENTAJAS DEL BILINGÜISMO

    Directory of Open Access Journals (Sweden)

    Alfredo Ardila

    2012-06-01

    Full Text Available Las personas bilingües tienen que coordinar dos sistemas lingüísticos. Esto implica algunas ganancias, pero también un costo. Las ganancias del bilingüismo incluyen: un incremento de la flexibilidad mental; una superioridad en el desarrollo de aquellas funciones cognitivas relacionadas con la atención y la inhibición; el uso de una cantidad mayor de estrategias cognoscitivas en la solución de problemas; un aumento de la llamada conciencia metalingüística; y una habilidad mayor de comunicación. Entre los costos del bilingüismo se menciona: cierto retraso aparente en la adquisición del lenguaje; una interferencia entre ambos sistemas fonológicos, léxicos y gramaticales; y un posible decremento en el vocabulario en las dos lenguas. Se concluye que existe una gran variabilidad de experiencias lingüísticas en las personas bilingües y un gran número de variables afecta su ejecución en diferentes tareas intelectuales.

  4. Ventajas y placeres secretos de estados depresivos

    Directory of Open Access Journals (Sweden)

    Günter Jursch

    2005-04-01

    Full Text Available Las depresiones y los estados depresivos varían de una persona a otra. Si se quiere trabajar para mejorar la situación de las víctimas de estos males, sería indicado saber en qué se distinguen los diferentes fenómenos y dónde se encuentra la causa. Pues las depresiones a menudo cumplen una función que suele aparecer camuflada.

  5. Ventajas de los motores de flujo axial

    Directory of Open Access Journals (Sweden)

    Alberto M Basanta Otero

    2011-03-01

    Full Text Available Es importante conocer sobre una familia de motores que a diferencia de los convencionales o tradicionales no presentanun flujo rotatorio radial, denominados motores de flujo axial. Dichos motores presentan altos valores de par motriz abajas velocidades, una alta eficiencia y alta densidad de potencia. Este trabajo constituye un breve análisis dealgunos motores de la referencia bibliográfica.  Is important to know about a family of motors that at difference whit the traditional, don't have a rotator radial flux,called, axial flux motors. These motors have high torque for low speed, high efficiency and high power density. Thiswork is a brief analysis of several motors of the bibliographic references.

  6. Publicidad, medio para crear una ventaja competitiva

    OpenAIRE

    Leyva Mancera, Jose Luis

    2014-01-01

    El caso muestra la manera en que surge una capacidad dinámica de reacción de la empresa líder del mercado en el sector automotriz en Colombia. GM Colmotores, genera estrategias para responder a los cambios, oportunidades y retos del mercado y los competidores. Así mismo se muestra la flexibilidad y evolución de la empresa que durante los últimos años siempre ha estado con la mayor porción de mercado en la industria. El desarrollo del caso permite ver como por medio de la capacidad de diri...

  7. LA VENTAJA COMPETITIVA DE LA EMPRESA REVISADA

    OpenAIRE

    JORGE TARZIJÁN M

    2002-01-01

    Despite its importance in the study of business strategy, the concept of competitive advantage looks ambiguous. It is not completely clear what does it mean and how to measure it. In this article, we review some of the most important visions about this concept in the business strategy literature and analyze the main determinants of a competitive advantage. We conclude that it is not possible to analyze the competitive advantage of a firm without analyzing, simultaneously, the willingness to p...

  8. Calidad total: fuente de ventaja competitiva

    OpenAIRE

    Tarí, Juan-José

    2000-01-01

    El objeto de este trabajo es analizar la dirección de la calidad estudiando sus pilares básicos como son, la planificación, organización y control por un lado y los aspectos humanos por otro, centrándonos en sus dos elementos clave para desarrollar la calidad total: el liderazgo y la involucración de todos los empleados.

  9. Nuclear Medicine in a developing country

    International Nuclear Information System (INIS)

    Wenzel, K.S. von; Rubow, S.M.; Ellmann, A.; Ghoorun, S.

    2002-01-01

    Namibia is a country with 1,8 million inhabitants, of whom the majority has limited access to first world facilities. Nevertheless, medical services of high standard are offered. A Nuclear Medicine Department was established at Windhoek Central Hospital in 1982. A nuclear physician, two nuclear medicine radiographers and a nursing sister staff the department. Equipment includes a Siemens Orbiter and an Elscint Apex SPX Helix gamma camera. Radiopharmaceuticals are obtained from suppliers in South Africa. Investigations performed include musculoskeletal, liver, hepatobiliary, thyroid, renal studies, ventilation perfusion lung scans as well as the following Nuclear Cardiology studies: Gated blood pool scans, Tc-99m pyrophosphate hot spot scans, Tl-201 myocardial perfusion studies, Tc-99m MIBI myocardial perfusion studies and Tl-201 rest-redistribution studies. Problems experienced at the Windhoek Nuclear Medicine department include: Lack of funding and high cost of equipment and radiopharmaceuticals, lack of understanding of Nuclear Medicine by the hospital management and health administrators, and difficulties in procuring short-lived radiopharmaceuticals. Furthermore, the absence of company representatives and spare parts in Namibia leads to loss of time whenever equipment needs to be repaired. Working as the only nuclear medicine physician in a country also poses major problems. Careful management of resources and information drives have helped to sustain the Nuclear Medicine service despite economic problems in the country. Installation of a tele-link between the department in Windhoek Hospital and Tygerberg Hospital in South Africa has greatly assisted to overcome the problem of isolation and lack of back up from fellow specialists. The IAEA has equipped both departments with Hermes workstations (Nuclear Diagnostics) and a tele-link is maintained via modem. The current software provided with the Hermes system is ideally suited to processing of data such as gated

  10. Establishment for Nuclear Equipment: Overview

    International Nuclear Information System (INIS)

    Pracz, J.

    2001-01-01

    Full text: The activity of ZdAJ in 2000 was focused on realisation of the Government-Ordered Project - 6/15 MeV Accelerator. The realisation was accomplished in two stages: - stage I should result in deriving principal operational parameters of the accelerator - stage 2 will result in full implementation of the control system providing optimum control of the equipment and automatic maintaining of its parameters. Within the frames of the first stage, a klystron modulator panel was finished and the design documentation of the mechanical supporting structure, the arm, accelerating structure, collimator and control panel were advanced. Manufacturing of the above sub-units in the workshop has started. In the frames of the Specific Project of the State Committee for Scientific Research, the improvement of Neptun lOPC accelerator was undertaken. The read-out of the monitor dose with atmospheric pressure and ambient temperature compensation has been introduced. New filters for equalising the photon and electron beam and new wedge filters have been designed. Changes in programming have been introduced, which improve the patient's safety by eliminating possible personnel errors and increase the accuracy of radiation fields read-out. In 2000 ZdAJ progressed in development of the Quality System conforming EN-ISO 9001 Standard by including the provisions of EN 46001 Standard. The Standard EN 46001: ''Quality Systems - Medical Equipment''. Detailed requirements related to application of EN ISO 9001 is an European Quality Standard extending the provisions of EN ISO 9001 Standard over the manufacturers of medical equipment. (author)

  11. Reflections on preventive medicine.

    Science.gov (United States)

    Miettinen, Olli S

    2014-10-01

    Having thought much about medicine in my career-long effort to understand it and the research for its advancement, I have come to views rather different form the now-prevailing ones in respect to what preventive medicine is about; what epidemiology is in relation to preventive medicine; what distinguishes preventive medicine in preventive healthcare at large; the relation of preventive medicine to public health; the concept of health promotion; and also the core principles of preventive medicine. All of these views I set forth in this article, for the readers' critical reflection. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Reactor vital equipment determination techniques

    International Nuclear Information System (INIS)

    Bott, T.F.; Thomas, W.S.

    1983-01-01

    The Reactor Vital Equipment Determination Techniques program at the Los Alamos National Laboratory is discussed. The purpose of the program is to provide the Nuclear Regulatory Commission (NRC) with technical support in identifying vital areas at nuclear power plants using a fault-tree technique. A reexamination of some system modeling assumptions is being performed for the Vital Area Analysis Program. A short description of the vital area analysis and supporting research on modeling assumptions is presented. Perceptions of program modifications based on the research are outlined, and the status of high-priority research topics is discussed

  13. Computers in nuclear medicine

    International Nuclear Information System (INIS)

    Cradduck, T.D.; Knowles, L.G.

    1977-01-01

    The decision to buy a computer is difficult. The wide variety of computing systems available makes that decision even harder because each of the systems has unique advantages and disadvantages. The following list contains many of the essentials any computer system for nuclear medicine should embody: (1) sophisticated and reliable hardware with sufficient memory capacity to acquire or display at least 128 x 128 static images or 64 x 64 dynamic studies and with the facility for adding extra hardware and peripheral equipment at a later date; (2) a well-proved, general-purpose, real-time operating system to which the programs specific to the gamma camera have been interfaced and which will allow expansion or modification of both hardware and software in the future; (3) a display exhibiting at least 128 x 128 resolution, a monochrome mode with extended gray scale, and perhaps color; a varied set of programmed image formats and hardware system that includes local refresher capabilities; (4) a high-level language, such as FORTRAN or BASIC, with the ability to directly access all data files and interact with system programs as well as a macroprogramming capability so the user may write his own programs for data manipulation and analysis; (5) a comprehensive yet generally applicable set of system programs to enable data acquisition, storage, analysis, and display. In addition to the above, one should expect the services of a team of well-trained maintenance technicians and engineers. The manufacturer should offer software support and exhibit a plan for continued development and upgrading of the software initially provided

  14. Ionizing radiation in the education of medicine

    International Nuclear Information System (INIS)

    Ivanova, N.

    2016-01-01

    Physics is a fundamental science that finds its applications in all areas of our lives. Its application in modern medicine is undeniable. In today’s medical practice special attention is dedicated to the use of ionizing radiation. The wide range of modern science and technology offers enormous possibilities for creation and implementation of new equipment using adequate doses of ionizing radiation. For accurate medical diagnostics and effective treatment of patients, this type of equipment must provide the necessary information to the physicians. On the other hand, the physicians should possess enough knowledge in the relative field of medicine. This paper contains information about the knowledge communicated to the students of the graduate program Medical Physics and Biophysics in the discipline Medicine in the first year of graduate study at the Medical University “Prof. Dr. Paraskev Stoyanov” of Varna. Firstly, we discuss the topics in the lectures of these two disciplines, concerning knowledge about ionizing radiation. Secondly, the respective laboratory exercises are described that illustrate the lectures in the graduate programs Medical Physics and Biophysics. Keywords: ionizing radiation, education, medicine, medical physics, biophysics

  15. Order of 2 May 1977 on a proficiency certificate for handling industrial radioscopy and radiography equipment

    International Nuclear Information System (INIS)

    1977-01-01

    This Order lays down that any person handling industrial radioscopy or radiography equipment must obtain a proficiency certificate delivered by a regional jury made up of the regional director for labour and manpower or his representative, a physician competent for industrial medicine and specialized in radiation protection and an expert in industrial radiology. (NEA) [fr

  16. The replace repair decision for heavy equipment.

    Science.gov (United States)

    2004-01-01

    The fleet of equipment operated by the Virginia Department of Transportation (VDOT) constitutes a large investment, on the order of half a billion dollars. A means of identifying earlier and more accurately those pieces of equipment whose timely repl...

  17. Proceedings of FED remote maintenance equipment workshop

    International Nuclear Information System (INIS)

    Sager, P.; Garin, J.; Hager, E.R.; Spampinato, P.T.; Tobias, D.; Young, N.

    1981-11-01

    A workshop was convened in two sessions in January and March 1981, on the remote maintenance equipment for the Fusion Engineering Device (FED). The objectives of the first session were to familiarize the participants with the status of the design of the FED and to develop a remote maintenance equipment list for the FED. The objective of the second session was to have the participants present design concepts for the equipment which had been identified in the first session. The equipment list was developed for general purpose and special purpose equipment. The general purpose equipment was categorized as manipulators and other, while the special purpose equipment was subdivided according to the reactor subsystem it serviced: electrical, magnetic, and nuclear. Both mobile and fixed base manipulators were identified. Handling machines were identified as the major requirement for special purpose equipment

  18. Musical Sound, Instruments, and Equipment

    Science.gov (United States)

    Photinos, Panos

    2017-12-01

    'Musical Sound, Instruments, and Equipment' offers a basic understanding of sound, musical instruments and music equipment, geared towards a general audience and non-science majors. The book begins with an introduction of the fundamental properties of sound waves, and the perception of the characteristics of sound. The relation between intensity and loudness, and the relation between frequency and pitch are discussed. The basics of propagation of sound waves, and the interaction of sound waves with objects and structures of various sizes are introduced. Standing waves, harmonics and resonance are explained in simple terms, using graphics that provide a visual understanding. The development is focused on musical instruments and acoustics. The construction of musical scales and the frequency relations are reviewed and applied in the description of musical instruments. The frequency spectrum of selected instruments is explored using freely available sound analysis software. Sound amplification and sound recording, including analog and digital approaches, are discussed in two separate chapters. The book concludes with a chapter on acoustics, the physical factors that affect the quality of the music experience, and practical ways to improve the acoustics at home or small recording studios. A brief technical section is provided at the end of each chapter, where the interested reader can find the relevant physics and sample calculations. These quantitative sections can be skipped without affecting the comprehension of the basic material. Questions are provided to test the reader's understanding of the material. Answers are given in the appendix.

  19. Concerning equipment procurement for NPPs

    International Nuclear Information System (INIS)

    Pana, N.

    2002-01-01

    After a stagnation in investments for nuclear power which extended over a period of 10-15 years, assessments done by energy forecast institutes, as well as, evaluations by UE institutions, OECD, and DOE (USA) point to the conclusion solid and argued that the electric energy of nuclear origin will record a new boost beginning probably with the year 2005. Particular efforts were concentrated upon improving the performances of existing plants and, on the other hand, towards new, evolutionary concepts in nuclear engineering. Advanced equipment for nuclear reactors and plants resulted and were already implemented. In Europe construction of both advanced PWR and BWR type reactors are underway. The paper consider the issues of Romanian nuclear power and presents the prospects for advanced CANDU reactors in connection with the Romania's infrastructure and necessities. The problem of modernizing the equipment and components for NPP is discussed in the context of financing and investment conditions. In conclusion, the share of nuclear power in Romania is expected to rise in order to compensate the decline in fossil fuel thermal power and to better solve the environmental issues

  20. Computers in nuclear medicine - current trends and future directions

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Previously, a decision to purchase computing equipment for nuclear medicine usually required evaluation of the 'local' needs. With the advent of Pacs and state of the art computer techniques for image acquisition and manipulation, purchase and subsequent application is to become much more complex. Some of the current trends and future possibilities which may influence the choice and operation of computers within and outside the nuclear medicine environment is discussed. (author)

  1. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... are small, diagnostic nuclear medicine procedures result in low radiation exposure, acceptable for diagnostic exams. Thus, the radiation risk is very low compared with the potential benefits. Nuclear medicine diagnostic ...

  2. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... What are some common uses of the procedure? Children's (pediatric) nuclear medicine imaging is performed to help diagnose childhood disorders that are congenital (present at birth) or that develop during childhood. Physicians use nuclear medicine imaging to ...

  3. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Nuclear Medicine Children’s (pediatric) nuclear medicine imaging uses small amounts of radioactive materials called radiotracers, a special ... is a branch of medical imaging that uses small amounts of radioactive material to diagnose and determine ...

  4. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Tell your doctor about your child’s recent illnesses, medical conditions, medications and allergies. Depending on the type ... Nuclear Medicine? Nuclear medicine is a branch of medical imaging that uses small amounts of radioactive material ...

  5. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Because nuclear medicine procedures are able to pinpoint molecular activity within the body, they offer the potential ... or imaging device that produces pictures and provides molecular information. In many centers, nuclear medicine images can ...

  6. Is Marijuana Medicine?

    Science.gov (United States)

    ... Alcohol Club Drugs Cocaine Fentanyl Hallucinogens Inhalants Heroin Marijuana MDMA (Ecstasy/Molly) Methamphetamine Opioids Over-the-Counter Medicines Prescription Medicines Steroids (Anabolic) Synthetic Cannabinoids (K2/Spice) Synthetic Cathinones (Bath Salts) Tobacco/ ...

  7. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... interventions. Children's (pediatric) nuclear medicine refers to imaging examinations done in babies, young children and teenagers. Nuclear ... nuclear medicine procedure work? With ordinary x-ray examinations, an image is made by passing x-rays ...

  8. 30 days in medicine

    African Journals Online (AJOL)

    Of the 58 men who tested positive for oral gonorrhoea, 33 were randomly ... Medicine suggests that compressing this amount of physical activity into a weekend ... practise medicine differently; for example, women are more likely to adhere to ...

  9. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... MRI. top of page What are some common uses of the procedure? Children's (pediatric) nuclear medicine imaging ... at birth) or that develop during childhood. Physicians use nuclear medicine imaging to evaluate organ systems, including ...

  10. Herbal Medicine - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Herbal Medicine URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Herbal Medicine - Multiple Languages To use the sharing features on ...

  11. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... child is taking as well as vitamins and herbal supplements and if he or she has any ... What are the limitations of Children's (Pediatric) Nuclear Medicine? Nuclear medicine procedures can be time consuming. It ...

  12. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... that are congenital (present at birth) or that develop during childhood. Physicians use nuclear medicine imaging to evaluate organ ... Nuclear medicine scans are typically used to ...

  13. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... referring physician. top of page What are the benefits vs. risks? Benefits The information provided by nuclear medicine examinations is ... risk is very low compared with the potential benefits. Nuclear medicine diagnostic procedures have been used for ...

  14. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... Nuclear Medicine? Nuclear medicine is a branch of medical imaging that uses small amounts of radioactive material to ... a radiologist or other physician. To locate a medical imaging or radiation oncology provider in your community, you ...

  15. Equipment available for automating rig operations

    International Nuclear Information System (INIS)

    McNair, W.L.

    1990-01-01

    Several manufacturers are producing automated rig equipment, from complete systems to individual functions for existing drilling rigs. Significant improvements in well site time, costs of operations, and improved drilling performance have led drilling contractors to install this equipment on their rigs. This paper details some of the equipment available for automating rigs

  16. 13 CFR 143.32 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Equipment. 143.32 Section 143.32...

  17. 32 CFR 33.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 32 National Defense 1 2010-07-01 2010-07-01 false Equipment. 33.32 Section 33.32 National Defense...

  18. 45 CFR 92.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 45 Public Welfare 1 2010-10-01 2010-10-01 false Equipment. 92.32 Section 92.32 Public Welfare...

  19. 40 CFR 31.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Equipment. 31.32 Section 31.32...

  20. 14 CFR 1273.32 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Equipment. 1273.32 Section 1273.32...

  1. 29 CFR 1470.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 29 Labor 4 2010-07-01 2010-07-01 false Equipment. 1470.32 Section 1470.32 Labor Regulations...

  2. 15 CFR 24.32 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Equipment. 24.32 Section 24.32...

  3. 38 CFR 43.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... awarding agency. (d) Management requirements. Procedures for managing equipment (including replacement... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Equipment. 43.32 Section...

  4. 30 CFR 250.602 - Equipment movement.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Equipment movement. 250.602 Section 250.602... OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Workover Operations § 250.602 Equipment movement. The movement of well-workover rigs and related equipment on and off a platform or from well to well on...

  5. 30 CFR 250.502 - Equipment movement.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Equipment movement. 250.502 Section 250.502... OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Completion Operations § 250.502 Equipment movement. The movement of well-completion rigs and related equipment on and off a platform or from well to well...

  6. 46 CFR 121.220 - Cooking equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cooking equipment. 121.220 Section 121.220 Shipping... SYSTEMS AND EQUIPMENT Cooking and Heating § 121.220 Cooking equipment. (a) Doors on a cooking appliance... cooking appliance must be installed to prevent movement in heavy seas. (c) For a grill or similar type of...

  7. 46 CFR 184.220 - Cooking equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Cooking equipment. 184.220 Section 184.220 Shipping...) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Cooking and Heating § 184.220 Cooking equipment. (a) Doors on a cooking appliance must be provided with hinges and locking devices to prevent...

  8. Special equipment for etching nitrocellulose film

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1983-08-01

    Nitrocellulose film and converter screens used for neutron radiography are described. Difficulties in visualization of radiographs on those films are mentioned. Because there is no equipment for etching nitrocellulose film available on the market Risoe has designed and produced such equipment at an estimated cost of Dkr. 15,000. Design criteria for this equipment are given and its performance described

  9. Developing equipment for AGR remote visual inspection

    International Nuclear Information System (INIS)

    James, P.W.; Walton, P.J.

    1985-01-01

    The Remote Inspection Group is part of the CEGB's Generation Development and Construction Division, and has responsibility for the design, development, procurement, testing and setting to work of the equipment provided to carry out routine remote visual inspections of its AGRs. This equipment includes both the viewing devices and the necessary placement equipment. (author)

  10. 46 CFR 121.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Heating equipment. 121.210 Section 121.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... SYSTEMS AND EQUIPMENT Cooking and Heating § 121.210 Heating equipment. (a) Each heater must be so...

  11. 46 CFR 184.210 - Heating equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Heating equipment. 184.210 Section 184.210 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Cooking and Heating § 184.210 Heating equipment...

  12. Sample-related peripheral equipment at IPNS

    International Nuclear Information System (INIS)

    Bohringer, D.E.; Crawford, R.K.

    1985-01-01

    This paper describes samples environment equipment provided by IPNS to visiting users and staff scientists. Of the twelve horizontal neutron beam stations, (ten now operational, two under construction) all use one or more form of such support equipment. An in-house support group devotes a significant fraction of its time to development, calibration, and maintenance of this equipment

  13. 14 CFR 121.605 - Airplane equipment.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Airplane equipment. 121.605 Section 121.605..., FLAG, AND SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.605 Airplane equipment. No person may dispatch or release an airplane unless it is airworthy and is equipped as prescribed in § 121...

  14. Fire prevention and protection for trackless equipment

    Energy Technology Data Exchange (ETDEWEB)

    Burger, A.J.

    1988-10-01

    With the increased use of trackless diesel and electrical equipment underground, the fire danger associated with this equipment has increased. The need for adequate fire prevention and protection on all aspects of trackless mechanised mining must be taken into consideration. This paper describes briefly the causes of fires on trackless equipment and the precautions taken to reduce the risk of ignition. 1 tab.

  15. Load Bearing Equipment for Bone and Muscle

    Science.gov (United States)

    Shackelford, Linda; Griffith, Bryan

    2015-01-01

    Resistance exercise on ISS has proven effective in maintaining bone mineral density and muscle mass. Exploration missions require exercise with similar high loads using equipment with less mass and volume and greater safety and reliability than resistance exercise equipment used on ISS (iRED, ARED, FWED). Load Bearing Equipment (LBE) uses each exercising person to create and control the load to the partner.

  16. Experts and equipment: The IAEA programme in 1965

    International Nuclear Information System (INIS)

    1965-01-01

    Nearly 100 projects are being assisted by Agency experts and equipment in 38 countries under the 1965 programme to be financed from Agency funds, which the Board of Governors approved at its meeting in February, together with four other countries where projects previously approved extend into 1965. In addition, further work is being financed under the UN Expanded Programme of Technical Assistance, including several important regional projects. Under the Agency's long-term programme, it is desirable that all types of technical assistance, whether training, research, or expert advice, should be combined as far as possible. Each country will therefore be asked, in respect of its 1966 programme, to make its requests for experts, equipment, fellowships, scientific visits and research grants as a single submission. The Agency then prepares a country programme of technical assistance, in collaboration with the Government. The number of requests for experts and equipment continues to grow year by year, and it has not been possible to finance them all. This increase is largely because a number of Member States have now set up research reactors and established a nucleus of laboratories under bilateral arrangements; they then turn to the Agency for assistance in developing their programmes. The estimated cost of experts and equipment being provided from Agency resources is $874 000 in 1965, of which $596 800 is for experts, and $277 200 is for equipment and supplies. The Agency also assists some Member States in making arrangements to receive technical assistance directly from other Member States. The work covers a wide range, with isotopes predominating; about 30 projects deal with production of isotopes, their applications in medicine, agriculture and hydrology, in food preservation and industry. A number of projects are concerned with various aspects of reactor construction and use; others deal with health and safety, instrumentation, special branches of chemistry and

  17. Personalized laboratory medicine

    DEFF Research Database (Denmark)

    Pazzagli, M.; Malentacchi, F.; Mancini, I.

    2015-01-01

    diagnostic tools and expertise and commands proper state-of-the-art knowledge about Personalized Medicine and Laboratory Medicine in Europe, the joint Working Group "Personalized Laboratory Medicine" of the EFLM and ESPT societies compiled and conducted the Questionnaire "Is Laboratory Medicine ready...... in "omics"; 2. Additional training for the current personnel focused on the new methodologies; 3. Incorporation in the Laboratory of new competencies in data interpretation and counselling; 4. Improving cooperation and collaboration between professionals of different disciplines to integrate information...

  18. Annals of African Medicine

    African Journals Online (AJOL)

    The Annals of African Medicine is published by the Usmanu Danfodiyo University Teaching Hospital, Sokoto, Nigeria and the Annals of African Medicine Society. The Journal is intended to serve as a medium for the publication of research findings in the broad field of Medicine in Africa and other developing countries, and ...

  19. Bovine paratuberculosis: a review of the advantages and disadvantages of different diagnostic tests Paratuberculosis bovina: una revisión sobre las ventajas y desventajas de las diferentes pruebas diagnósticas

    Directory of Open Access Journals (Sweden)

    Liliana R. Gilardoni

    2012-09-01

    varían según el estadio de la enfermedad de los animales que se evalúan. La correcta elección y aplicación de cada una de estas pruebas asegura el éxito del diagnóstico y permite establecer un programa de control. El objetivo de este trabajo es la recopilación y discusión de las diferentes pruebas diagnósticas utilizadas en la detección de los animales infectados por Map, concentrándose en sus ventajas y desventajas.

  20. Establishment for Nuclear Equipment -Overview

    International Nuclear Information System (INIS)

    Pracz, J.

    2006-01-01

    Research and development works conducted in the Establishment for Nuclear Equipment (ZdAJ) were focused around 3 subject areas: an accelerator for cancer treatment, therapeutical tables, systems and methods for controlling objects that cross international borders. The new, medium energy accelerator for cancer therapy cases is being designed in the Establishment for several years. In 2005 progress was achieved. A physical part, containing an electron beam has been completed and the parameters of that beam make it useful for therapeutical purposes. Consequently, the work on designing and testing of beam control systems, ensuring its high stability, repetition of irradiation parameters and accuracy of dosage have been started. Results of these tests make it very probable that 2006 will be the final year of scientific works and in 2007 the new apparatus will be ready for sales. Therapeutical tables have become a leading product of ZdAJ IPJ. Their technical parameters, reliability and universality in uses are appreciated by many customers of ZdAJ. In 2005, the table Polkam 16 was registered by the national Office for Registration of Medical Equipment as the first product of ZdAJ that meets all technical and formal requirements of the safety mark CE. This allows sales of the product on the market of the European Union. The research and development part of designing a therapeutical table for uses in the total body irradiation technique was also concluded in 2005. After the September 11 terrorist attacks on WTC a matter of controlling international borders have become a priority for many countries. In 2005 in ZdAJ IPJ, we conducted many preliminary calculations and experiments analyzing systems of irradiation sources, both photon and neutron as well as systems of detection and designing of signals triggered by controlling objects crossing the border. The results so far have enabled us to formulate a research project which has been positively evaluated by experts and found

  1. The medicines refrigerator and the importance of the cold chain in the safe storage of medicines.

    Science.gov (United States)

    Hatchett, Richard

    2017-10-04

    The medicines refrigerator is a common piece of equipment found in clinical areas. It is used to ensure specific medicines are safely stored within a narrow temperature range in line with manufacturers' instructions; this is usually between +2˚C and +8˚C, and ideally +5˚C. Drugs stored in the medicines refrigerator include: vaccines; insulin; chemotherapy drugs; topical preparations, such as some types of eye drops; and other treatments such as glucagon, which is used to manage severe hypoglycaemia. This article reviews the function of the medicines refrigerator and the checks required by healthcare practitioners to ensure that medicines remain safely stored and their effectiveness is maintained. It also outlines the medicines refrigeration procedure known as the 'cold chain', which includes the use of cold boxes or vaccine carriers to maintain the required temperature of medicines during transport from the manufacturer to user, or between healthcare departments. ©2012 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

  2. Mind-Body Medicine Practices in Complementary and Alternative Medicine

    Science.gov (United States)

    ... Visitor Information RePORT NIH Fact Sheets Home > Mind-Body Medicine Practices in Complementary and Alternative Medicine Small Text Medium Text Large Text Mind-Body Medicine Practices in Complementary and Alternative Medicine YESTERDAY ...

  3. Communication equipment radiation resistance ensurance

    International Nuclear Information System (INIS)

    Myrova, L.O.; Chelizhenko, A.Z.

    1983-01-01

    A review of works on radiation resistance of electronic equipment (epsilon epsilon) for 15 years is presented. The effect of ionizing radiation appearing as a result of nuclear explosions in nuclear facilities and in outerspace on epsilon epsilon has been considered. Types of radiation effects in epsilon epsilon, radiation effect on semiconductor devices and integrated circUits, types of epsilon epsilon failures, as well as the procass of radiation-resistant epsilon epsilon designing and selection of its main parameters have been described. The methods of epsilon epsilon flowsheet optimization, application of mathematical simulation and peculiarities of ensurance of epsilon epsilon radiation resistance of communication systems are considered. Peculiarities of designing of radiation-resistant quartz generators, secondary power supply sources and amplifiers are discussed

  4. Purex: process and equipment performance

    International Nuclear Information System (INIS)

    Orth, D.A.

    1986-01-01

    The Purex process is the solvent extraction system that uses tributyl phosphate as the extractant for separating uranium and plutonium from irradiated reactor fuels. Since the first flowsheet was proposed at Oak Ridge National Laboratory in 1950, the process has endured for over 30 years with only minor modifications. The spread of the technology was rapid, and worldwide use or research on Purex-type processes was reported by the time of the 1955 Geneva Conference. The overall performance of the process has been so good that there are no serious contenders for replacing it soon. This paper presents: process description; equipment performance (mixer-settlers, pulse columns, rapid contactors); fission product decontamination; solvent effects (solvent degradation products); and partitioning of uranium and plutonium

  5. Automation of a thermogravimetric equipment

    International Nuclear Information System (INIS)

    Mussio, L.; Castiglioni, J.; Diano, W.

    1987-01-01

    A low cost automation of some instruments by means of simple electronic circuits and a microcomputer Apple IIe. type is discussed. The electronic circuits described are: a) a position detector including phototransistors connected as differential amplifier; b) a current source that, using the error signal of the position detector, changes the current through the coil of an electromagnetic balance to restore its zero position; c) a proportional temperature controller, zero volt switching to drive a furnace to a desired temperature; d) an interface temperature regulator-microcomputer to control the temperature regulator by software; e) a multiplexer for an analog input of a commercial interface. Those circuits are applied in a thermogravimetric equipment used also for vapours adsorption. A program in block diagram form is included and is able to record change of mass, time, furnace temperature and to drive the temperature regulator in order to have the heating rates or the temperature plateaux needed for the experiment. (author) [pt

  6. Establishment for Nuclear Equipment: Overview

    International Nuclear Information System (INIS)

    Pracz, J.

    2000-01-01

    Full text: The main objective of the activity of the Establishment for Nuclear Equipment (ZdAJ) in 1999 was to obtain the ISO 9001 certificate. Work on this problem has been successfully completed. The changes introduced in agreement with requirements of ISO in supervising the construction, manufacturing and servicing eliminate possible deficiencies of our products and will pay in the future. Two new important ventures have been undertaken: design of an accelerator with two photon energies and a reconstruction of simulator directed towards better geometrical parameters. The completion of the improvements in accelerator is foreseen for the year 2002. The changes comprise almost all sub-assemblies of the device. The modernized simulator will be installed in the hospital already in the year 2000 - the ameliorations concern mainly the arm of the apparatus, collimator, driving gears and control system. Of course - apart from this, the routine production activity of the Establishment was continued in 1999. (author)

  7. Supporting management of medical equipment for inpatient service in public hospitals: a case study.

    Science.gov (United States)

    Figueroa, Rosa L; Vallejos, Guido E

    2013-01-01

    This work presents a study of medical equipment availability in the short and long term. The work is divided in two parts. The first part is an analysis of the medical equipment inventory for the institution of study. We consider the replacement, maintenance, and reinforcement of the available medical equipment by considering local guidelines and surveying clinical personnel appreciation. The resulting recommendation is to upgrade the current equipment inventory if necessary. The second part considered a demand analysis in the short and medium term. We predicted the future demand with a 5-year horizon using Holt-Winters models. Inventory analysis showed that 27% of the medical equipment in stock was not functional. Due to this poor performance result we suggested that the hospital gradually addresses this situation by replacing 29 non-functional equipment items, reinforcing stock with 40 new items, and adding 11 items not available in the inventory but suggested by the national guidelines. The results suggest that general medicine inpatient demand has a tendency to increase within the time e.g. for general medicine inpatient service the highest increment is obtained by respiratory (12%, RMSE=8%) and genitourinary diseases (20%, RMSE=9%). This increment did not involve any further upgrading of the proposed inventory.

  8. Protective equipment use among female rugby players.

    Science.gov (United States)

    Comstock, R Dawn; Fields, Sarah K; Knox, Christy L

    2005-07-01

    Our objective was to assess the prevalence of protective equipment use and the motivation for using protective equipment among a sample of US female rugby players. We surveyed a convenience sample of 234 current US female rugby players from 14 teams participating in a US women's rugby tournament, obtaining self-reported demographic, rugby exposure, and protective equipment use information. Mouthguards were the most commonly used piece of protective equipment: 90.8% of players reported having always worn a mouthguard while playing or practicing rugby within their most recent 3 months of play. Fewer than 15% of players reported having always worn other types of protective equipment. Equipment use varied by playing position. Whereas over 80% of players in all other positions always wore a mouthguard, 66.7% of scrum halves reported always wearing one. Both backs and forwards reported wearing shoulder pads, but only forwards reported always wearing padded headgear. Mouthguards, padded headgear, and shoulder pads were worn "to prevent injury," whereas ankle braces, neoprene sleeves, and athletic tape on joints were worn "to protect a current/recent injury." This is the first study of female rugby players to assess the prevalence of protective equipment use by playing position and the motivation for using protective equipment. With the exception of mouthguards, US female rugby players infrequently use protective equipment. Protective equipment use varies by playing position. Some types of protective equipment appear to be used as primary prevention mechanisms, whereas others are used as secondary or tertiary prevention mechanisms.

  9. Nuclear medicine physics

    CERN Document Server

    De Lima, Joao Jose

    2011-01-01

    Edited by a renowned international expert in the field, Nuclear Medicine Physics offers an up-to-date, state-of-the-art account of the physics behind the theoretical foundation and applications of nuclear medicine. It covers important physical aspects of the methods and instruments involved in modern nuclear medicine, along with related biological topics. The book first discusses the physics of and machines for producing radioisotopes suitable for use in conventional nuclear medicine and PET. After focusing on positron physics and the applications of positrons in medicine and biology, it descr

  10. Changing nature of equipment and parts qualification

    International Nuclear Information System (INIS)

    Bucci, R.M.

    1988-01-01

    Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace

  11. Free-world microelectronic manufacturing equipment

    Science.gov (United States)

    Kilby, J. S.; Arnold, W. H.; Booth, W. T.; Cunningham, J. A.; Hutcheson, J. D.; Owen, R. W.; Runyan, W. R.; McKenney, Barbara L.; McGrain, Moira; Taub, Renee G.

    1988-12-01

    Equipment is examined and evaluated for the manufacture of microelectronic integrated circuit devices and sources for that equipment within the Free World. Equipment suitable for the following are examined: single-crystal silicon slice manufacturing and processing; required lithographic processes; wafer processing; device packaging; and test of digital integrated circuits. Availability of the equipment is also discussed, now and in the near future. Very adequate equipment for most stages of the integrated circuit manufacturing process is available from several sources, in different countries, although the best and most widely used versions of most manufacturing equipment are made in the United States or Japan. There is also an active market in used equipment, suitable for manufacture of capable integrated circuits with performance somewhat short of the present state of the art.

  12. 9 CFR 590.502 - Equipment and utensils; PCB-containing equipment.

    Science.gov (United States)

    2010-01-01

    ... Sanitary Standards and accepted practices currently in effect for such equipment. (c) New or replacement equipment or machinery (including any replacement parts) brought onto the premises of any official plant... equipment and machinery, and any replacement parts for such equipment and machinery. Totally enclosed...

  13. Essential travel medicine

    CERN Document Server

    Zuckerman, Jane N; Leggat, Peter

    2015-01-01

    This 1st edition of Essential Travel Medicine provides an excellent concise introduction to the specialty of Travel Medicine. This core text will enable health care practitioners particularly those new to the clinical practice of Travel Medicine, to gain a fundamental understanding of the diverse and complex issues which can potentially affect the health of the many millions of people who undertake international travel. Jane N Zuckerman is joined by Gary W Brunette from CDC and Peter A Leggat from Australia as Editors. Leading international specialists in their fields have contributed authoritative chapters reflecting current knowledge to facilitate best clinical practice in the different aspects of travel medicine. The aim of Essential Travel Medicine is to provide a comprehensive guide to Travel Medicine as well as a fundamental knowledge base to support international undergraduate and postgraduate specialty training programmes in the discipline of Travel Medicine. The 1st edition of Essential Travel ...

  14. Fundamentals of nuclear medicine

    Energy Technology Data Exchange (ETDEWEB)

    Alazraki, N.P.; Mishkin, F.S.

    1984-01-01

    This guidebook for clinical nuclear medicine is written as a description of how nuclear medicine procedures should be used by clinicians in evaluating their patients. It is designed to assist medical students and physicians in becoming acquainted with nuclear medicine techniques for detecting and evaluating most common disorders. The material provides an introduction to, not a textbook of, nuclear medicine. Each chapter is devoted to a particular organ system or topic relevant to the risks and benefits involved in nuclear medicine studies. The emphasis is on presenting the rationales for ordering the various clinical imaging procedures performed in most nuclear medicine departments. Where appropriate, alternative imaging modalities including ultrasound, computed tomography imaging, and radiographic special procedures are discussed. Comparative data between nuclear medicine imaging and other modalities are presented to help guide the practicing clinician in the selection of the most appropriate procedure for a given problem.

  15. Over-the-Counter Medicines

    Science.gov (United States)

    Over-the-counter (OTC) medicines are drugs you can buy without a prescription. Some OTC medicines relieve aches, pains and itches. ... medicine is safe enough to sell over-the-counter. Taking OTC medicines still has risks. Some interact ...

  16. Cold Atmospheric Plasma Technology for Decontamination of Space Equipment

    Science.gov (United States)

    Thomas, Hubertus; Rettberg, Petra; Shimizu, Tetsuji; Thoma, Markus; Morfill, Gregor; Zimmermann, Julia; Müller, Meike; Semenov, Igor

    2016-07-01

    Cold atmospheric plasma (CAP) technology is very fast and effective in inactivation of all kinds of pathogens. It is used in hygiene and especially in medicine, since the plasma treatment can be applied to sensitive surfaces, like skin, too. In a first study to use CAP for the decontamination of space equipment we could show its potential as a quite promising alternative to the standard "dry heat" and H2O2 methods [Shimizu et al. Planetary and Space Science, 90, 60-71. (2014)]. In a follow-on study we continue the investigations to reach high application level of the technology. First, we redesign the actual setup to a plasma-gas circulation system, increasing the effectivity of inactivation and the sustainability. Additionally, we want to learn more about the plasma chemistry processes involved in the inactivation. Therefore, we perform detailed plasma and gas measurements and compare them to numerical simulations. The latter will finally be used to scale the decontamination system to sizes useful also for larger space equipment. Typical materials relevant for space equipment will be tested and investigated on surface material changes due to the plasma treatment. Additionally, it is planned to use electronic boards and compare their functionality before and after the CAP expose. We will give an overview on the status of the plasma decontamination project funded by the Bavarian Ministry of Economics.

  17. Nuclear Medicine in Pediatric Cardiology.

    Science.gov (United States)

    Milanesi, Ornella; Stellin, Giovanni; Zucchetta, Pietro

    2017-03-01

    Accurate cardiovascular imaging is essential for the successful management of patients with congenital heart disease (CHD). Echocardiography and angiography have been for long time the most important imaging modalities in pediatric cardiology, but nuclear medicine has contributed in many situations to the comprehension of physiological consequences of CHD, quantifying pulmonary blood flow symmetry or right-to-left shunting. In recent times, remarkable improvements in imaging equipments, particularly in multidetector computed tomography and magnetic resonance imaging, have led to the progressive integration of high resolution modalities in the clinical workup of children affected by CHD, reducing the role of diagnostic angiography. Technology has seen a parallel evolution in the field of nuclear medicine, with the advent of hybrid machines, as SPECT/CT and PET/CT scanners. Improved detectors, hugely increased computing power, and new reconstruction algorithms allow for a significant reduction of the injected dose, with a parallel relevant decrease in radiation exposure. Nuclear medicine retains its distinctive capability of exploring at the tissue level many functional aspects of CHD in a safe and reproducible way. The lack of invasiveness, the limited need for sedation, the low radiation burden, and the insensitivity to body habitus variations make nuclear medicine an ideal complement of echocardiography. This is particularly true during the follow-up of patients with CHD, whose increasing survival represent a great medical success and a challenge for the health system in the next decades. Metabolic imaging using 18 FDG PET/CT has expanded its role in the management of infection and inflammation in adult patients, particularly in cardiology. The same expansion is observed in pediatric cardiology, with an increasing rate of studies on the use of FDG PET for the evaluation of children with vasculitis, suspected valvular infection or infected prosthetic devices. The

  18. Quality assurance for radiodiagnostic equipment in Uruguay

    International Nuclear Information System (INIS)

    Cotelo, Elena D.

    2001-01-01

    Since Uruguay did not have an study on X-ray equipment, students of Radiation Protection course (RP) made this field work throughout the country. The objective is to obtain information on the number and kind of X-ray radiodiagnostic equipment. Some of the results are: there are 666 radiodiagnostic equipment. The ratio of population to equipment is 4.515 to 1 in the capital and the mean rate in the rest of the country is 4.383 to one, with a minimum of 1.707 and a maximum of 8.220. The Public Health Ministry (MSP) and the Instituciones de Asistencia Medica Colectiva (a kind of private heath assurance) (IAMC) have less equipment in the capital than in the rest of the country. The 37% of the capital population receives assistance through the IAMC , with a 42.5 % of the equipment. Uruguay except the capital has 18 districts and 17 computed tomography equipment, from which only 3 belong to the MSP. Five districts do not have any. In Montevideo, there are 11.500 females over forty years of age per X-ray mammography equipment, and this relation in the rest of the country is 13.900. There are 21 X-ray Interventional radiology equipment, 16 of them are in the capital. Is from relating the radiodiagnostic equipment, the population and the procedures, that quality assistance indicators emerge. This owns high importance on the way to create a RP National Programme. (author)

  19. Maintenance program guidelines for programmatic equipment

    International Nuclear Information System (INIS)

    1994-11-01

    The Division Directors at Lawrence Berkeley Laboratory are responsible for implementing a maintenance program for research equipment (also referred to as programmatic equipment) assigned to them. The program must allow maintenance to be accomplished in a manner that promotes operational safety, environmental protection and compliance, and cost effectiveness; that preserves the intended functions of the facilities and equipment; and that supports the programmatic mission of the Laboratory. Programmatic equipment -- such as accelerators, lasers, radiation detection equipment, and glove boxes -- is dedicated specifically to research. Installed equipment, by contrast, includes the mechanical and electrical systems installed as part of basic building construction, equipment essential to the normal functioning of the facility and its intended use. Examples of installed equipment are heating, ventilating, and air conditioning systems; elevators; and communications systems. The LBL Operating and Assurance Program Plan (PUB-3111, Revision 4) requires that a maintenance program be prepared for programmatic equipment and defines the basic maintenance program elements. Such a program of regular, documented maintenance is vital to the safety and quality of research activities. As a part of that support, this document offers guidance to Laboratory organizations for developing their maintenance programs. It clarifies the maintenance requirements of the Operating and Assurance Program (OAP) and presents an approach that, while not the only possibility, can be expected to produce an effective maintenance program for research equipment belonging to the Laboratory's organizations

  20. Medicinal chemistry and the pharmacy curriculum.

    Science.gov (United States)

    Khan, M O Faruk; Deimling, Michael J; Philip, Ashok

    2011-10-10

    The origins and advancements of pharmacy, medicinal chemistry, and drug discovery are interwoven in nature. Medicinal chemistry provides pharmacy students with a thorough understanding of drug mechanisms of action, structure-activity relationships (SAR), acid-base and physicochemical properties, and absorption, distribution, metabolism, excretion, and toxicity (ADMET) profiles. A comprehensive understanding of the chemical basis of drug action equips pharmacy students with the ability to answer rationally the "why" and "how" questions related to drug action and it sets the pharmacist apart as the chemical expert among health care professionals. By imparting an exclusive knowledge base, medicinal chemistry plays a vital role in providing critical thinking and evidence-based problem-solving skills to pharmacy students, enabling them to make optimal patient-specific therapeutic decisions. This review highlights the parallel nature of the history of pharmacy and medicinal chemistry, as well as the key elements of medicinal chemistry and drug discovery that make it an indispensable component of the pharmacy curriculum.

  1. Extended family medicine training

    Science.gov (United States)

    Slade, Steve; Ross, Shelley; Lawrence, Kathrine; Archibald, Douglas; Mackay, Maria Palacios; Oandasan, Ivy F.

    2016-01-01

    Abstract Objective To examine trends in family medicine training at a time when substantial pedagogic change is under way, focusing on factors that relate to extended family medicine training. Design Aggregate-level secondary data analysis based on the Canadian Post-MD Education Registry. Setting Canada. Participants All Canadian citizens and permanent residents who were registered in postgraduate family medicine training programs within Canadian faculties of medicine from 1995 to 2013. Main outcome measures Number and proportion of family medicine residents exiting 2-year and extended (third-year and above) family medicine training programs, as well as the types and numbers of extended training programs offered in 2015. Results The proportion of family medicine trainees pursuing extended training almost doubled during the study period, going from 10.9% in 1995 to 21.1% in 2013. Men and Canadian medical graduates were more likely to take extended family medicine training. Among the 5 most recent family medicine exit cohorts (from 2009 to 2013), 25.9% of men completed extended training programs compared with 18.3% of women, and 23.1% of Canadian medical graduates completed extended training compared with 13.6% of international medical graduates. Family medicine programs vary substantially with respect to the proportion of their trainees who undertake extended training, ranging from a low of 12.3% to a high of 35.1% among trainees exiting from 2011 to 2013. Conclusion New initiatives, such as the Triple C Competency-based Curriculum, CanMEDS–Family Medicine, and Certificates of Added Competence, have emerged as part of family medicine education and credentialing. In acknowledgment of the potential effect of these initiatives, it is important that future research examine how pedagogic change and, in particular, extended training shapes the care family physicians offer their patients. As part of that research it will be important to measure the breadth and uptake of

  2. Instrumentation in the nuclear medicine modern achievements and perspective developments

    International Nuclear Information System (INIS)

    Narkevich, B.Ya.

    1999-01-01

    Most important achievement and tendencies of development of physical maintenance of modern nuclear medicine are analysed. The urgent problems and directions of researches are considered in the field of development of the equipment, technologies of measurements and software maintenance, and also means and procedures of the warranty of radiodiagnostic researches [ru

  3. Plan estratégico de mercadeo para el Banco Popular y Desarrollo Comunal con el propósito de ampliar los beneficios del programa ventajas popular a los tarjetahabientes del cantón central de Limón y Talamanca

    OpenAIRE

    Mora Blanco, Osvaldo

    2015-01-01

    Universidad de Costa Rica. Posgrado en Administración y Dirección de Empresas. Maestría Profesional en Administración y Dirección de Empresas, 2015 En esta memoria de graduación se desarrolla, un plan estratégico de mercadeo para el Banco Popular y de Desarrollo Comunal, con el propósito de ampliar los beneficios del programa Ventajas Popular, a los tarjetahabientes del cantón de Limón y Talamanca. En el capítulo I, se desarrolla un análisis de las generalidades del sector financiero d...

  4. Inspection device for buried equipment

    International Nuclear Information System (INIS)

    Hanawa, Jun.

    1994-01-01

    In an inspection device for a buried equipment, a rail is suspended at the upper portion of a vessel of a pit-vessel type pump buried in a plant building floor, and a truck movable vertical in the vessel along the rail, and an ultrasonic wave probe contained in the truck and urged to the vessel by an electromagnet are disposed. In addition, an elevator moving vertically along a shaft is disposed, and an arm having the ultrasonic probe disposed at the end portion and driven by a piston are disposed to the elevator. The ultrasonic wave probe moves vertically together with the truck along the rail in the vessel while being urged to the vessel by the electromagnet to inspect and measure the state at the inner and outer surfaces of the vessel. Further, the length of the arm is controlled so as to set a predetermined distance between the ultrasonic wave probe and the vessel. Subsequently, the elevator is moved vertically along a shaft passing through a shaft hole of a mount, and the shaft is rotated thereby enabling to inspect and measure the state of the inner and outer surfaces of the vessel. (N.H.)

  5. Ageing management and equipment qualification

    International Nuclear Information System (INIS)

    Stahl, Gunnar

    2014-01-01

    The knowledge of how the environment and load of organic material in general and especially polymers and lubricants, is affecting the degradation of important properties, have increased during the last decade. However the restrictions using established additives like some color pigments due to their poisonousness e.g. pigments based at cadmium, lead, mercury etc. have caused problems when replacing additives to polymers. The replacement additives have often been used in new design without going through the required material qualification procedure. There have also been observed that some non-qualified and non-approved materials have been installed in some power plants due to false documentation. There are also a lot of new manufacturers, of materials similar to the previously qualified materials, active at the market. This increases the difficulty to ensure that the required material quality is used. New materials, new additives and new manufacturers makes if more and more difficult to assure that the expected material is present. This causes more strict demands of how the new materials often used in equipment at type-testing and in replacement materials are analyzed and documented. By implementing new steps for chemical, mechanical and electrical analysis and increase the general quality assurance content this issue can be managed. (authors)

  6. Equipment selection for atmospheric drying

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, P D; Bhattacharyya, S [Nuclear Power Corporation, Bhabha Atomic Research Centre, Mumbai (India)

    1994-06-01

    Heavy water management is a major factor in deciding the economics of the PHWRs. Hence it is necessary to have an efficient recovery system, for the heavy water vapour escaping from various process systems and maintain a dry atmosphere in the recovery areas. While the basic objective of the atmospheric drying system is to maximize recovery and to minimize stack losses, it is equally important to optimally design the system with due consideration to operational and maintenance aspects. At present, heavy water vapour recovery in the existing Nuclear Power Plants (NPPs) is carried out by dryers of dual fixed bed design. While moving bed design could have some advantages, this has not been adopted so far because of the cumbersome mechanical design involved and special requirements for nuclear application. Developmental work done in this direction has resulted in compact alternative designs. In one of the designs, the change over from adsorption to regeneration is achieved by rotating the bed slowly. This concept is further refined in another alternative using a dessicant wheel. This paper contains brief equipment description of different designs; enumerates the design requirements of an atmospheric drying system for reactor building; describes steps for designing fixed bed type D{sub 2}O vapour recovery system, and highlights advances in dryer technology. (author). 2 refs., 4 figs., 1 ill.

  7. Materials division facilities and equipment

    International Nuclear Information System (INIS)

    Biest, O. v.d.

    1984-01-01

    The research activities of the Division at the Petten Establishment have the aims of characterising the properties of high temperature materials in industrial process environments and of understanding the structures involved in order to gain an insight into behavioural mechanisms. Metallic materials fall within the scope of the programme; the activities are, at present, almost entirely concerned with austenitic steels and nickel based alloys. Starting in 1984, advanced ceramic materials will be studied as well. The equipment available permits the study of mechanical properties in controlled gaseous environments, of the rates and mechanisms of corrosive reactions between materials and those environments, and of the surface and bulk structures by advanced physical techniques. Special preparation and treatment techniques are available. The Division has developed a Data Bank on high temperature alloys. It also operates an information Centre, the activities of which include the organisation of scientific meetings, the commissioning of ''state of the art'' studies on topics in the field of high temperature materials and their applications and the development of a inventory of current research activities in the field in Europe. This booklet is intended to present the facilities and services of the Division to the organizations which are interested in its programmes of work

  8. ISS qualified thermal carrier equipment

    Science.gov (United States)

    Deuser, Mark S.; Vellinger, John C.; Jennings, Wm. M.

    2000-01-01

    Biotechnology is undergoing a period of rapid and sustained growth, a trend which is expected to continue as the general population ages and as new medical treatments and products are conceived. As pharmaceutical and biomedical companies continue to search for improved methods of production and, for answers to basic research questions, they will seek out new avenues of research. Space processing on the International Space Station (ISS) offers such an opportunity! Space is rapidly becoming an industrial laboratory for biotechnology research and processing. Space bioprocessing offers exciting possibilities for developing new pharmaceuticals and medical treatments, which can be used to benefit mankind on Earth. It also represents a new economic frontier for the private sector. For over eight years, the thermal carrier development team at SHOT has been working with government and commercial sector scientists who are conducting microgravity experiments that require thermal control. SHOT realized several years ago that the hardware currently being used for microgravity thermal control was becoming obsolete. It is likely that the government, academic, and industrial bioscience community members could utilize SHOT's hardware as a replacement to their current microgravity thermal carrier equipment. Moreover, SHOT is aware of several international scientists interested in utilizing our space qualified thermal carrier. SHOT's economic financing concept could be extremely beneficial to the international participant, while providing a source of geographic return for their particular region. Beginning in 2000, flight qualified thermal carriers are expected to be available to both the private and government sectors. .

  9. Diagnostics of Electric Equipment Windings

    Directory of Open Access Journals (Sweden)

    I. I. Branovitsky

    2007-01-01

    Full Text Available The paper presents methodology and results of the investigations pertaining to study of influence of short-circuited turns on transient electrical processes in electric motor windings. Dependence of their damped speed and value of the difference signal, obtained at reciprocal subtraction of damped oscillation curves in absence and in presence of short-circuited turns, on number of turns in the tested windings. It has been determined that damped oscillation curves, immediately attributed to short-circuited turns, have peak values along temporary axis which are areas of the largest transient process sensitivity to КЗ turns.Methodology for diagnostics of single- and three-phase electric motor windings and also other electric equipment, being realized in DO-1 device, has been developed in the paper. The men­tioned device makes it possible to carry out visual comparison and quantitative analysis of damped oscillation curves in the tested windings with standard ones which are set in the device memory and their difference signals.

  10. WP EMPLACEMENT CONTROL AND COMMUNICATION EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    Raczka, N.T.

    1997-01-01

    The objective and scope of this document are to list and briefly describe the major control and communication equipment necessary for waste package emplacement at the proposed nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the required equipment are explained and summarized in the individual subsections of this document. This task was evaluated in accordance with QAP-2-0 and found not to be quality affecting. Therefore, this document was prepared in accordance with NAP-MG-012. The following control and communication equipment are addressed in this document: (1) Programmable Logic Controllers (PLC's); (2) Leaky Feeder Radio Frequency Communication Equipment; (3) Slotted Microwave guide Communication Equipment; (4) Vision Systems; (5) Radio Control Equipment; and (6) Enclosure Cooling Systems

  11. Procurement strategic analysis of nuclear safety equipment

    International Nuclear Information System (INIS)

    Wu Caixia; Yang Haifeng; Li Xiaoyang; Li Shixin

    2013-01-01

    The nuclear power development plan in China puts forward a challenge on procurement of nuclear safety equipment. Based on the characteristics of the procurement of nuclear safety equipment, requirements are raised for procurement process, including further clarification of equipment technical specification, establishment and improvement of the expert database of the nuclear power industry, adoption of more reasonable evaluation method and establishment of a unified platform for nuclear power plants to procure nuclear safety equipment. This paper makes recommendation of procurement strategy for nuclear power production enterprises from following aspects, making a plan of procurement progress, dividing procurement packages rationally, establishing supplier database through qualification review and implementing classified management, promoting localization process of key equipment continually and further improving the system and mechanism of procurement of nuclear safety equipment. (authors)

  12. Improved servicing equipment for steam generators

    International Nuclear Information System (INIS)

    Hedtke, James C.

    1998-01-01

    To help keep personnel exposure as low as reasonably achievable and reduce critical path outage time, most nuclear plants of PWR design in the USA are now using improved equipment to service their steam generators (SGs) during outages. Because of the success of this equipment in the USA, two Belgian plants and one English plant have purchased this equipment, and other nuclear plants in Europe are also considering procurement. The improved SG servicing equipment discussed in this paper discusses consists of nozzle dams, segmented multi-stud tensioner, primary manway cover handling tool set, shield door and fastener cleaner. This equipment is specifically designed for the individual plant application and can also be specified for replacement SG projects. All of the equipment can be used without modification of the existing SGs. (author)

  13. The 3rd questionnaire report of safety control on instrument in nuclear medicine laboratory

    International Nuclear Information System (INIS)

    1994-01-01

    The present 3rd survey was aimed at grasping safety control in nuclear medicine examination and the trend for SPECT usage. Questionnaires were sent to 1238 facilities dealing with nuclear medicine; and 1127 facilities (91.0%) responded. The survey period was three years from April 1, 1989 through March 31, 1992. The following 7 items were surveyed: (1) nuclear medicine personnel, (2) nuclear medicine equipments, (3) accidents occurring in nuclear medicine laboratories, (4) risk factors leading to accidents, (5) countermeasures for improving safety control, (6) major breakdown of the machinery and equipment, and (7) demands for makers. Majority of nuclear medicine personnel were male and were less than 50 years old. The number of SPECT equipments increased from 714 in the previous survey to 968. Accidents (personal injuries) and narrow escape from an accident were seen in 45 and 154 cases. Personal injuries such as falling occurred in 37 patients and 8 nuclear medicine personnel. According to nuclear medicine examinations, SPECT was the most common examination associated with accident and narrow escape cases (86/199). Such cases at the beginning of examination were remarkably decreased, as compared with those in the previous two surveys. Accidents were primarily attributable to careless management by personnel. Breakdown of the machinery and equipment was reported in 207 cases. In Item 5, the following contents were presented: heads for examination, personnel's behavior, education, examination equipments, collimators and others. Finally, contents in Item 7 included: equipment design, heads for examination, maintenance or management, data processing, collimators, examination equipments and others. (N.K.)

  14. Equipment Replacement Decision Making: Opportunities and Challenges

    OpenAIRE

    Fan, Wei (David); Gemar, Mason D.; Machemehl, Randy

    2012-01-01

    The primary function of equipment managers is to replace the right equipment at the right time and at the lowest overall cost. In this paper, the opportunities and challenges associated with equipment replacement optimization (ERO) are discussed in detail. First, a comprehensive review of the state-of-the art and state-of-the practice literature for the ERO problem is conducted. Second, a dynamic programming (DP) based optimization solution methodology is presented to solve the ERO problem. T...

  15. History and development of the tennis equipment

    OpenAIRE

    Horáková, Kateřina

    2007-01-01

    Title: History and development of the tennis equipment. Aim of the work: Process an integral, tabular and synoptic historical development overview of the tennis equipment. This owerview will cover the period since the early beginnings of the game to present days. Methods: Advance work has historical charakter therefore used methods are historiogaphical methods such as chronological method and historical method. Results: Produce tabular description of the tennis equipment by means of reading a...

  16. Mine railway equipments management information system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, X.; Han, K.; Duan, T.; Liu, Z.; Lu, H. [China University of Mining and Technology, Xuzhou (China)

    2007-06-15

    Based on client/server and browser/server models, the management information system described realized the entire life-cycle management of mine railway equipment which included universal equipment and special equipment in the locomotive depot, track maintenance division, electrical depot and car depot. The system has other online functions such as transmitting reports, graphics management, statistics, searches, graphics wizard and web propaganda. It was applied in Pingdingshan Coal Co. Ltd.'s Railway Transport Department. 5 refs., 4 figs.

  17. Maimonides? Appreciation for Medicine

    OpenAIRE

    Gesundheit, Benjamin

    2011-01-01

    Moses Maimonides, the illustrious medieval rabbi and philosopher, dedicated the last decade of his life primarily to medicine. His strong interest in medicine was an integral component of his religious-philosophical teachings and world view. In this paper various sources from his rabbinic writings are presented that explain Maimonides’ motivation regarding and deep appreciation for medicine: (A) The physician fulfills the basic biblical obligation to return lost objects to their owner, for wi...

  18. Fundamentals of nuclear medicine

    Energy Technology Data Exchange (ETDEWEB)

    Alazraki, N.P.; Mishkin, F.S.

    1988-01-01

    The book begins with basic science and statistics relevant to nuclear medicine, and specific organ systems are addressed in separate chapters. A section of the text also covers imaging of groups of disease processes (eg, trauma, cancer). The authors present a comparison between nuclear medicine techniques and other diagnostic imaging studies. A table is given which comments on sensitivities and specificities of common nuclear medicine studies. The sensitivities and specificities are categorized as very high, high, moderate, and so forth.

  19. Fundamentals of nuclear medicine

    International Nuclear Information System (INIS)

    Alazraki, N.P.; Mishkin, F.S.

    1988-01-01

    The book begins with basic science and statistics relevant to nuclear medicine, and specific organ systems are addressed in separate chapters. A section of the text also covers imaging of groups of disease processes (eg, trauma, cancer). The authors present a comparison between nuclear medicine techniques and other diagnostic imaging studies. A table is given which comments on sensitivities and specificities of common nuclear medicine studies. The sensitivities and specificities are categorized as very high, high, moderate, and so forth

  20. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose:The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  1. Making petroleum equipment safe, a priority

    International Nuclear Information System (INIS)

    1999-01-01

    Changes to the 'Act respecting the use of petroleum products' have been announced effective May 1, 1999. The changes have been made to reduce problems which can be attributed to petroleum product leaks. The new regulations will make owners and users of petroleum equipment, including underground and above-ground storage equipment and commercial storage tanks, more accountable for the use of their own equipment. The emphasis in the new regulations is based upon the storage capacity of petroleum equipment and the risks associated with this equipment, rather than the on the activities of the owners concerned. Accordingly, the new regulations call for stricter requirements for high-risk equipment, a private equipment inspection plan, a two-year operating permit, replacing the current permits and certificates, a tariff structure based on the risks associated with the equipment, and deregulation of commercial activities involving petroleum products that require no equipment. Additionally, the amendments to the Act transfer responsibility for administration to the Regie du batiment and to the Ministere des Transports. Details of each of these changes are explained

  2. Utility equipment systems: promising more for less

    Energy Technology Data Exchange (ETDEWEB)

    1987-10-01

    This paper discusses current developments in utility equipment systems, a term applied to carrier vehicles, mostly evolved from well-known forms of construction or mining equipment modified to work with a variety of different front or back end attachments. One of the equipment ranges discussed is the Normet cassette system produced by the Orion corporation of Finland, which allows a basic chassis to be converted from a personnel carrier to an ANFO carrier within minutes. LHD vehicles which are being adapted to fulfil multipurpose roles, such as carrying roof supports, chocks and other heavy mining equipment underground are also discussed. 5 figs.

  3. Detection of Equipment Faults Before Beam Loss

    CERN Document Server

    Galambos, J.

    2016-01-01

    High-power hadron accelerators have strict limits on fractional beam loss. In principle, once a high-quality beam is set up in an acceptable state, beam loss should remain steady. However, in practice, there are many trips in operational machines, owing to excessive beam loss. This paper deals with monitoring equipment health to identify precursor signals that indicate an issue with equipment that will lead to unacceptable beam loss. To this end, a variety of equipment and beam signal measurements are described. In particular, several operational examples from the Spallation Neutron Source (SNS) of deteriorating equipment functionality leading to beam loss are reported.

  4. 21 CFR 866.4500 - Immunoelectrophoresis equipment.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents... clinical use with its electrical power supply is a device used for separating protein molecules...

  5. PROMSYS, Plant Equipment Maintenance and Inspection Scheduling

    International Nuclear Information System (INIS)

    Morgan, D.L.; Srite, B.E.

    1986-01-01

    1 - Description of problem or function: PROMSYS is a computer system designed to automate the scheduling of routine maintenance and inspection of plant equipment. This 'programmed maintenance' provides the detailed planning and accomplishment of lubrication, inspection, and similar repetitive maintenance activities which can be scheduled at specified predetermined intervals throughout the year. The equipment items included are the typical pumps, blowers, motors, compressors, automotive equipment, refrigeration units, filtering systems, machine shop equipment, cranes, elevators, motor-generator sets, and electrical switchgear found throughout industry, as well as cell ventilation, shielding, containment, and material handling equipment unique to nuclear research and development facilities. Four related programs are used to produce sorted schedule lists, delinquent work lists, and optional master lists. Five additional programs are used to create and maintain records of all scheduled and unscheduled maintenance history. 2 - Method of solution: Service specifications and frequency are established and stored. The computer program reviews schedules weekly and prints, on schedule cards, instructions for service that is due the following week. The basic output from the computer program comes in two forms: programmed-maintenance schedule cards and programmed-maintenance data sheets. The data sheets can be issued in numerical building, route, and location number sequence as equipment lists, grouped for work assigned to a particular foreman as the foreman's equipment list, or grouped by work charged to a particular work order as the work-order list. Data sheets grouped by equipment classification are called the equipment classification list

  6. Equipment Reliability Process in Krsko NPP

    International Nuclear Information System (INIS)

    Gluhak, M.

    2016-01-01

    To ensure long-term safe and reliable plant operation, equipment operability and availability must also be ensured by setting a group of processes to be established within the nuclear power plant. Equipment reliability process represents the integration and coordination of important equipment reliability activities into one process, which enables equipment performance and condition monitoring, preventive maintenance activities development, implementation and optimization, continuous improvement of the processes and long term planning. The initiative for introducing systematic approach for equipment reliability assuring came from US nuclear industry guided by INPO (Institute of Nuclear Power Operations) and by participation of several US nuclear utilities. As a result of the initiative, first edition of INPO document AP-913, 'Equipment Reliability Process Description' was issued and it became a basic document for implementation of equipment reliability process for the whole nuclear industry. The scope of equipment reliability process in Krsko NPP consists of following programs: equipment criticality classification, preventive maintenance program, corrective action program, system health reports and long-term investment plan. By implementation, supervision and continuous improvement of those programs, guided by more than thirty years of operating experience, Krsko NPP will continue to be on a track of safe and reliable operation until the end of prolonged life time. (author).

  7. Additional Equipment for Soil Biodegradation

    Science.gov (United States)

    Vondráčková, Terezie; Kraus, Michal; Šál, Jiří

    2017-12-01

    Intensification of industrial production, increasing citizens’ living standards, expanding the consumer assortment mean in the production - consumption cycle a constantly increasing occurrence of waste material, which by its very nature must be considered as a source of useful raw materials in all branches of human activity. In addition to strict legislative requirements, a number of circumstances characterize waste management. It is mainly extensive transport associated with the handling and storage of large volumes of substances with a large assortment of materials (substances of all possible physical and chemical properties) and high demands on reliability and time coordination of follow-up processes. Considerable differences in transport distances, a large number of sources, processors and customers, and not least seasonal fluctuations in waste and strong price pressures cannot be overlooked. This highlights the importance of logistics in waste management. Soils that are contaminated with oil and petroleum products are hazardous industrial waste. Methods of industrial waste disposal are landfilling, biological processes, thermal processes and physical and chemical methods. The paper focuses on the possibilities of degradation of oil pollution, in particular biodegradation by bacteria, which is relatively low-cost among technologies. It is necessary to win the fight with time so that no ground water is contaminated. We have developed two additional devices to help reduce oil accident of smaller ranges. In the case of such an oil accident, it is necessary to carry out the permeability test of contaminated soil in time and, on this basis, to choose the technology appropriate to the accident - either in-sit biodegradation - at the site of the accident, or on-sit - to remove the soil and biodegrade it on the designated deposits. A special injection drill was developed for in-sit biodegradation, tossing and aeration equipment of the extracted soil was developed for

  8. Lunar construction/mining equipment

    Science.gov (United States)

    Ozdemir, Levent

    1990-01-01

    For centuries, mining has utilized drill and blast as the primary method of rock excavation. Although this technique has undergone significant improvements, it still remains a cyclic, labor intensive operation with inherent safety hazards. Other drawbacks include damage to the surrounding ground, creation of blast vibrations, rough excavation walls resulting in increased ventilation requirements, and the lack of selective mining ability. Perhaps the most important shortcoming of drill and blast is that it is not conducive to full implementation of automation or robotics technologies. Numerous attempts have been made in the past to automate drill and blast operations to remove personnel from the hazardous work environment. Although most of the concepts devised look promising on paper, none of them was found workable on a sustained production basis. In particular, the problem of serious damage to equipment during the blasting cycle could not be resolved regardless of the amount of charge used in excavation. Since drill and blast is not capable of meeting the requirements of a fully automated rock fragmentation method, its role is bound to gradually decrease. Mechanical excavation, in contrast, is highly suitable to automation because it is a continuous process and does not involve any explosives. Many of the basic principles and trends controlling the design of an earth-based mechanical excavator will hold in an extraterrestrial environment such as on the lunar surface. However, the economic and physical limitations for transporting materials to space will require major rethinking of these machines. In concept, then, a lunar mechanical excavator will look and perform significantly different from one designed for use here on earth. This viewgraph presentation gives an overview of such mechanical excavator systems.

  9. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... variety of diseases, including many types of cancers, heart disease, gastrointestinal, endocrine, neurological disorders and other abnormalities within the body. Because nuclear medicine procedures are ...

  10. Traditional medicine and genomics

    Directory of Open Access Journals (Sweden)

    Kalpana Joshi

    2010-01-01

    Full Text Available ′Omics′ developments in the form of genomics, proteomics and metabolomics have increased the impetus of traditional medicine research. Studies exploring the genomic, proteomic and metabolomic basis of human constitutional types based on Ayurveda and other systems of oriental medicine are becoming popular. Such studies remain important to developing better understanding of human variations and individual differences. Countries like India, Korea, China and Japan are investing in research on evidence-based traditional medicines and scientific validation of fundamental principles. This review provides an account of studies addressing relationships between traditional medicine and genomics.

  11. Traditional medicine and genomics.

    Science.gov (United States)

    Joshi, Kalpana; Ghodke, Yogita; Shintre, Pooja

    2010-01-01

    'Omics' developments in the form of genomics, proteomics and metabolomics have increased the impetus of traditional medicine research. Studies exploring the genomic, proteomic and metabolomic basis of human constitutional types based on Ayurveda and other systems of oriental medicine are becoming popular. Such studies remain important to developing better understanding of human variations and individual differences. Countries like India, Korea, China and Japan are investing in research on evidence-based traditional medicines and scientific validation of fundamental principles. This review provides an account of studies addressing relationships between traditional medicine and genomics.

  12. [Precision and personalized medicine].

    Science.gov (United States)

    Sipka, Sándor

    2016-10-01

    The author describes the concept of "personalized medicine" and the newly introduced "precision medicine". "Precision medicine" applies the terms of "phenotype", "endotype" and "biomarker" in order to characterize more precisely the various diseases. Using "biomarkers" the homogeneous type of a disease (a "phenotype") can be divided into subgroups called "endotypes" requiring different forms of treatment and financing. The good results of "precision medicine" have become especially apparent in relation with allergic and autoimmune diseases. The application of this new way of thinking is going to be necessary in Hungary, too, in the near future for participants, controllers and financing boards of healthcare. Orv. Hetil., 2016, 157(44), 1739-1741.

  13. Personalized medicine in psychiatry

    DEFF Research Database (Denmark)

    Wium-Andersen, Ida Kim; Vinberg, Maj; Kessing, Lars Vedel

    2017-01-01

    Background: Personalized medicine is a model in which a patient’s unique clinical, genetic, and environmental characteristics are the basis for treatment and prevention.  Aim, method, and results: This review aims to describe the current tools, phenomenological features, clinical risk factors......, and biomarkers used to provide personalized medicine. Furthermore, this study describes the target areas in which they can be applied including diagnostics, treatment selection and response, assessment of risk of side-effects, and prevention.  Discussion and conclusion: Personalized medicine in psychiatry....... The discussion proposes possible solutions to narrow this gap and to move psychiatric research forward towards personalized medicine....

  14. Music and medicine

    Directory of Open Access Journals (Sweden)

    Donatella Lippi

    2010-08-01

    Full Text Available Donatella Lippi1, Paolo Roberti di Sarsina2, John Patrick D’Elios11History of Medicine, Department of Anatomy, Histology, and Forensic Medicine, University of Florence, Florence, Italy; 2Health Local Unit, Department of Mental Health, Bologna, ItalyAbstract: Healing sounds have always been considered in the past an important aid in medical practice, and nowadays, medicine has confirmed the efficacy of music therapy in many diseases. The aim of this study is to assess the curative power of music, in the frame of the current clinical relationship.Keywords: history of medicine, medical humanities, healing music

  15. Teaching evidence based medicine in family medicine

    Directory of Open Access Journals (Sweden)

    Davorka Vrdoljak

    2012-05-01

    Full Text Available The concept of evidence based medicine (EBM as the integrationof clinical expertise, patient values and the best evidence was introduced by David Sackett in the 1980’s. Scientific literature in medicine is often marked by expansion, acummulation and quick expiration. Reading all important articles to keep in touch with relevant information is impossible. Finding the best evidence that answers a clinical question in general practice (GP in a short time is not easy. Five useful steps are described –represented by the acronym “5A+E”: assess, ask, acquire, appraise, apply and evaluate.The habit of conducting an evidence search “on the spot’’ is proposed. Although students of medicine at University of Split School of Medicine are taught EBM from the first day of their study and in all courses, their experience of evidence-searching and critical appraisal of the evidence, in real time with real patient is inadequate. Teaching the final-year students the practical use of EBM in a GP’s office is different and can have an important role in their professional development. It can positively impact on quality of their future work in family practice (or some other medical specialty by acquiring this habit of constant evidence-checking to ensure that best practice becomes a mechanism for life-long learning. Conclusion. EBM is a foundation stone of every branch of medicine and important part of Family Medicine as scientific and professional discipline. To have an EB answer resulting from GP’s everyday work is becoming a part of everyday practice.

  16. Complementary alternative medicine and nuclear medicine

    International Nuclear Information System (INIS)

    Werneke, Ursula; McCready, V.Ralph

    2004-01-01

    Complementary alternative medicines (CAMs), including food supplements, are taken widely by patients, especially those with cancer. Others take CAMs hoping to improve fitness or prevent disease. Physicians (and patients) may not be aware of the potential side-effects and interactions of CAMs with conventional treatment. Likewise, their known physiological effects could interfere with radiopharmaceutical kinetics, producing abnormal treatment responses and diagnostic results. Nuclear medicine physicians are encouraged to question patients on their intake of CAMs when taking their history prior to radionuclide therapy or diagnosis. The potential effect of CAMs should be considered when unexpected therapeutic or diagnostic results are found. (orig.)

  17. Upgradation of nuclear medical equipment in the developing countries and its impact in Bangladesh

    International Nuclear Information System (INIS)

    Jahangir, Saleh Mahmud; Xie, Y.; Uddin, Md. Rokon; Haque, Mohammod Abu Sayid; Hoq, Mahbubul; Mawla, Yasmeen; Alom, Md. Zahangir; Morium, Tasnim

    2002-11-01

    Bangladesh has thirteen Nuclear Medical Centres and one Institute of Nuclear Medicine in the country which are being run and maintained by the physicians scientists and engineers of Bangladesh Atomic Energy Commission. The peaceful application of atomic energy was initiated through all these Centres with the use of clinical isotopes for thyroid and kidney studies. The equipment used for these purposes were the thyroid uptake system, rectilinear scanner and the multiprobe renogram system. The first gamma camera was installed in the country in 1980 at the Institute of Nuclear Medicine, Dhaka. That was the turning point for the country in the field of nuclear medicine. Presently all the nuclear medical establishments are equipped least with a gamma camera, thyroid uptake system and a renogram system. In the last two decades there has been a tremendous development in the design of nuclear medical equipment. Most of the old equipments were slow and manually operated. In the beginning of nineties of the past century there was an uprising in the computer technology and most of the manually operated machines were brought under computerization. It was basically done with a custom built processor to perform only the specific job and spare the users from doing some extra manual work. But the performances of the recent models of the same computerized equipment are by far the best as compared with the past ones. This report describes the role of the IAEA in the upgradation of medical equipment, PC interfacing, upgrading of old gamma cameras and the technological and socio-economic impact in Bangladesh

  18. State of emergency medicine in Azerbaijan.

    Science.gov (United States)

    Sule, Harsh; Kazimov, Shirin; Shahmaliyev, Oktay; Sirois, Adam

    2008-04-01

    There has been no previous study into the state of emergency medicine in Azerbaijan. As a legacy of the Soviet Semashko system, the "specialty" model of emergency medicine and integrated emergency departments do not exist here. Instead, pre-hospital emergency care is delivered by ambulance physicians and in-hospital care by individual departments, often in specialty hospitals. Emergency care is therefore fragmented, highly specialized and inefficient. The Emergency Medicine Development Initiative (EMDI) of the International Medical Corps (IMC) was designed to improve the quality of emergency care in four pilot regional centers in Azerbaijan. The objective of this study was to assess the baseline emergency medical capacity of these four centers. EMDI staff conducted a four-part baseline survey in April 2006 to assess emergency care in Ganja (the second largest city in Azerbaijan), Kurdamir, Shamkir and Yevlakh. Data collection involved interviews with relevant personnel and a retrospective records review in each city. Pre-hospital: The number of ambulance teams per 10,000 inhabitants is below the number required by local regulations. On average, 45% of 27 medications and 37% of 17 pieces of critical equipment were available. Of the emergency procedures, 21% could be performed in the pre-hospital setting. In-hospital: Admission rates were near 100% for the admissions department-an area that is supposed to function as an emergency department would. On average 57% of 40 medications and 42% of 22 pieces of critical equipment were available. Of the emergency procedures, 62% could be performed in the in-hospital setting. The emergency medical system surveyed in Azerbaijan is inefficiently organized, under-financed, poorly equipped and lacks adequately trained staff. Reforms need to be directed towards achieving international standards, while adapting new models for service delivery into the existing framework and improving system capacity as highlighted by this baseline

  19. Special Equipment and/or Devices.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI.

    This standard covers the sanitation requirements for equipment and/or devices used in the storage, preparation, or handling of foods and beverages. The National Sanitation Foundation's basic criteria for the evaluation of special equipment and/or devices has been prepared to fulfill several specific needs, its major function being to serve as a…

  20. 21 CFR 1250.67 - Watering equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Watering equipment. 1250.67 Section 1250.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... of drinking water or other beverages, or for food preservation purposes, equipment constructed so as...

  1. Using ADA Tasks to Simulate Operating Equipment

    Science.gov (United States)

    DeAcetis, Louis A.; Schmidt, Oron; Krishen, Kumar

    1990-01-01

    A method of simulating equipment using ADA tasks is discussed. Individual units of equipment are coded as concurrently running tasks that monitor and respond to input signals. This technique has been used in a simulation of the space-to-ground Communications and Tracking subsystem of Space Station Freedom.

  2. Enhancement of equipment services for Kozloduy NPP

    International Nuclear Information System (INIS)

    Schultz, Christophe

    2013-01-01

    Conclusion After 5 years of maintenance services, KNPP and AREVA have continuously intensified their partnership Close cooperation between KNPP, AREVA Local Office Engineers and OEM experts Involvement of sophisticated tools for diagnostics and condition monitoring Performance of engineering services and obsolescence evaluation Possibilities to perform equipment modernization of Electrical and IC equipment in future

  3. Emergency team personnel and technical equipment

    International Nuclear Information System (INIS)

    Muralt, R.

    1989-01-01

    The most important requirements for the emergency team can be summarized in three points. 1) The emergency team must be made up of top personnel from all fields and it should be functionally equiped. 2) The emergency teams must have complete command of their equipment. 3) The members of the team must be well motivated. 1 fig

  4. Weight/balance portable test equipment

    International Nuclear Information System (INIS)

    Whitlock, R.W.

    1994-01-01

    This document shows the general layout, and gives a part description for the weight/balance test equipment. This equipment will aid in the regulation of the leachate loading of tanker trucks. The report contains four drawings with part specifications. The leachate originates from lined trenches

  5. 7 CFR 550.38 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL RESEARCH SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ADMINISTRATIVE POLICY FOR NON-ASSISTANCE COOPERATIVE AGREEMENTS Management of Agreements... Agency, the Cooperator shall use the equipment to be replaced as trade-in or sell the equipment and use...

  6. Quantitative techniques for medical equipment maintenance management

    NARCIS (Netherlands)

    Ben Houria, Zeineb; Masmoudi, Malek; Al Hanbali, Ahmad; Khatrouch, Ikram; Masmoudi, Faouzi

    2016-01-01

    The maintenance department in a hospital is responsible for ensuring the safety of medical equipment and their availability while keeping the operation costs minimal. The selection of the best maintenance strategy is a key decision to reduce the equipment downtime, increase the availability, and

  7. 21 CFR 606.60 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Equipment. 606.60 Section 606.60 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS CURRENT... following frequency, include but are not limited to: Equipment Performance check Frequency Frequency of...

  8. Plutonium Immobilization Can Loading Equipment Review

    International Nuclear Information System (INIS)

    Kriikku, E.; Ward, C.; Stokes, M.; Randall, B.; Steed, J.; Jones, R.; Hamilton, L.

    1998-05-01

    This report lists the operations required to complete the Can Loading steps on the Pu Immobilization Plant Flow Sheets and evaluates the equipment options to complete each operation. This report recommends the most appropriate equipment to support Plutonium Immobilization Can Loading operations

  9. Radio monitoring problems, methods, and equipment

    CERN Document Server

    Rembovsky, Anatoly; Kozmin, Vladimir; Smolskiy, Sergey

    2009-01-01

    Offers a unified approach to fundamental aspects of Automated Radio Monitoring (ARM). This book discusses the development, modeling, design, and manufacture of ARM systems. It provides classification and descriptions of modern high-efficient hardware-software ARM equipment, including the equipment for detection and radio direction-finding.

  10. Development of Equipment for Use in Sport

    Science.gov (United States)

    James, David

    2012-01-01

    No one has ever been able to create a running shoe that can make one run faster, but in other sports the design of equipment has the potential to offer considerable enhancement. Judgement has to be made as to whether such advantage becomes unfair. This article indicates many possible sports in which the equipment plays an important part in the…

  11. 36 CFR 1207.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... 1207.32 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION GENERAL RULES... as follows: (1) Items of equipment with a current per-unit fair market value of less than $5,000 may...) Items of equipment with a current per unit fair market value in excess of $5,000 may be retained or sold...

  12. 21 CFR 211.65 - Equipment construction.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment construction. 211.65 Section 211.65 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS... construction. (a) Equipment shall be constructed so that surfaces that contact components, in-process materials...

  13. 47 CFR 18.203 - Equipment authorization.

    Science.gov (United States)

    2010-10-01

    ... information already on file with the Commission. (2) A technical report pursuant to §§ 18.207 and 18.311. (b... 47 Telecommunication 1 2010-10-01 2010-10-01 false Equipment authorization. 18.203 Section 18.203 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT...

  14. Medicinal plants of Lorestan

    Directory of Open Access Journals (Sweden)

    shahla ahmadi

    2010-03-01

    Full Text Available Collection and determination of medicinal plants in Lorestan province have been carried out for 6 years in the agriculture and natural resources research of center of Lorestan. The aims of this study were collection and identification the medicinal plans that grow in Loretta province, their distribution, habitat, traditional uses, utilized organ, manner of usage, botany specification, local name, Persian name and scientific name. Material and methods: Medicinal plants were collected from different regions by using field and library study for these goals we prepared a list of recorded medicinal plants from Lorestan, identified the local herbal experts. Results: Finally we collected 151 medicinal plant identified that related to 63 families and 90 genuses. The Lamiaceae, Compositae, Legominosae , Liliaceae, Umbelliferae and . Rosaceae are the greatest family in the Lorestan province. Diction: According to the literature 96 medicinal plans were recorded from Lorestan, but during this study we collected and identified 151 medicinal plants in Lorestan province. Comparing with those that recorded from Bushehr 70 sp.(9, Hormozgan 113 sp.(10, Markazi 144 sp. And Kordestan 144 sp(11. We have more diversity but comparing with Zanjan 163 sp.(13, Hamedan 315 sp.(14 And Qazvin 250 sp.(15 We have less diversity in medicinal plants.

  15. Immoral behaviour in medicine.

    Science.gov (United States)

    Carmon, P; Tabak, N

    1997-03-01

    The purpose of this paper is to emphasize a social phenomenon that exists in Israel: immoral medicine. In recent years, nurses have been exposed to many instances of immoral medicine in hospitals. We want to protest about the demands for money from patients who are waiting for surgical intervention, arouse the medical community's conscience concerning these immoral activities, and improve professional and moral behaviour.

  16. Medicines from Marine Invertebrates

    Science.gov (United States)

    Davies-Coleman, Mike

    2011-01-01

    Few of us realise that the oceans of the world are a relatively untapped reservoir of new natural product-derived medicines to combat the many diseases that plague humanity. We explore the role that an unremarkable sea snail and sea squirt are playing in providing us with new medicines for the alleviation of chronic pain and cancer respectively.…

  17. OTC Medicines and Pregnancy

    Science.gov (United States)

    ... need to take medicine regularly because of a health problem, talk with your doctor before you try to get pregnant. There may ... I currently take an OTC medicine for a health problem. Is there another ... Family Physicians, Over-the-Counter Medications in Pregnancy Centers for ...

  18. Radioisotopes in nuclear medicine

    International Nuclear Information System (INIS)

    Samuel, A.M.

    2002-01-01

    Full text: A number of advances in diverse fields of science and technology and the fruitful synchronization of many a new development to address the issues related to health care in terms of prognosis and diagnosis resulted in the availability of host of modern diagnostic tools in medicine. Nuclear medicine, a unique discipline in medicine is one such development, which during the last four decades has seen exponential growth. The unique contribution of this specialty is the ability to examine the dynamic state of every organ of the body with the help of radioactive tracers. This tracer application in nuclear medicine to monitor the biological molecules that participate in the dynamic state of body constituents has led to a whole new approach to biology and medicine. No other technique has the same level of sensitivity and specificity as obtained in radiotracer technique in the study of in-situ chemistry of body organs. As modem medicine becomes oriented towards molecules rather than organs, nuclear medicine will be in the forefront and will become an integral part of a curative process for regular and routine application. Advances in nuclear medicine will proceed along two principal lines: (i) the development of improved sensitive detectors of radiation, powerful and interpretable data processing, image analysis and display techniques, and (ii) the production of exotic and new but useful radiopharmaceuticals. All these aspects are dealt with in detail in this talk

  19. Radiation and medicine: introduction

    International Nuclear Information System (INIS)

    Lentle, B.; Singh, H.

    1984-01-01

    A brief historical review is given of the development of the various nuclear medicine techniques which have been evolved since the discovery of X-rays and radioactivity. The role of various disciplines, such as radiobiology, radiation chemistry, radiation physics and computers in the application of radiation in medicine is discussed. (U.K.)

  20. Nuclear energy and medicine

    International Nuclear Information System (INIS)

    1988-01-01

    The applications of nuclear energy on medicine, as well as the basic principles of these applications, are presented. The radiological diagnosis, the radiotherapy, the nuclear medicine, the radiological protection and the production of radioisotopes are studied. (M.A.C.) [pt

  1. Personalized physiological medicine

    NARCIS (Netherlands)

    Ince, Can

    2017-01-01

    This paper introduces the concept of personalized physiological medicine that is specifically directed at the needs of the critically ill patient. This differs from the conventional view of personalized medicine, characterized by biomarkers and gene profiling, instead focusing on time-variant

  2. Digital Nuclear Medicine

    International Nuclear Information System (INIS)

    Erickson, J.J.; Rollo, F.D.

    1982-01-01

    This book is meant ''to provide the most comprehensive presentation of the technical as well as clincial aspects of computerized nuclear medicine''. It covers basic applications, and advice on acquisition and quality control of nuclear medicine computer systems. The book evolved from a series of lectures given by the contributors during the computer preceptorship program at their institution, Vanderbilt University in Nashville

  3. Textbook of respiratory medicine

    International Nuclear Information System (INIS)

    Murray, J.F.; Nadel, J.

    1987-01-01

    This book presents a clinical reference of respiratory medicine. It also details basic science aspects of pulmonary physiology and describes recently developed, sophisticated diagnostic tools and therapeutic methods. It also covers anatomy, physiology, pharmacology, and pathology; microbiologic, radiologic, nuclear medicine, and biopsy methods for diagnosis

  4. Children's (Pediatric) Nuclear Medicine

    Medline Plus

    Full Text Available ... resume his/her normal activities after the nuclear medicine scan. If the child has been sedated, you will receive specific instructions ... usually mild. Nevertheless, you should inform the nuclear medicine personnel of any allergies your child may have or other problems that may have ...

  5. Medicines and Children

    Science.gov (United States)

    ... child. Here are some other tips for giving medicine safely to your child: Read and follow the label directions every time. ... new symptoms or unexpected side effects in your child The medicine doesn't appear to be working when you ...

  6. PACS in nuclear medicine

    International Nuclear Information System (INIS)

    Kang, Keon Wook

    2000-01-01

    PACS (Picture Archiving and Communication System) is being rapidly spread and installed in many hospitals, but most of the system do not include nuclear medicine field. Although additional costs of hardware for nuclear medicine PACS is low, the complexity in developing viewing software and little market have made the nuclear medicine PACS not popular. Most PACS utilize DICOM 3.0 as standard format, but standard format in nuclear medicine has been Interfile. Interfile should be converted into DICOM format if nuclear images are to be stored and visualized in most PACS. Nowadays, many vendors supply the DICOM option in gamma camera and PET. Several hospitals in Korea have already installed nucler PACS with DICOM, but only the screen captured images are supplied. Software for visualizing pseudo-color with color lookup tables and expressing with volume view should be developed to fulfill the demand of referring physicians and nuclear medicine physicians. PACS is going to integrate not only radiologic images but also endoscopic and pathologic images. Web and PC based PACS is now a trend and is much compatible with nuclear medicine PACS. Most important barrier for nuclear medicine PACS that we encounter is not a technical problem, but indifference of investor such as administrator of hospital or PACS. Now it is time to support and invest for the development of nuclear medicine PACS

  7. Obstetric medicine: Interlinking obstetrics and internal medicine

    African Journals Online (AJOL)

    1 Mayo Clinic Hospitals, Division of Hospital Internal Medicine, Rochester, Minn, USA ... Obstetric physicians have a specific role in managing pregnant and postpartum women with ... problems may also affect pregnancy outcomes, with increased risk of ... greatly benefited from good control of her diabetes and hypertension.

  8. [Medicine in sports or sport medicine?] ].

    Science.gov (United States)

    Heimer, S; Tonković-Lojović, M

    2001-01-01

    Sports medicine is a profession pertaining to primary health care of sport population (competitors, coaches, referees, participants in sports recreation). It embraces the physical and mental health protection and promotion of participants in relation to a particular sport activity and sport environment, directing athletes to a sport and adapting them to sport and the sport to them. Sports medicine takes part in selection procedure, training process planning and programming, and cares for epidemiological, hygienic, nutritional and other problems in sport. The Republic of Croatia belongs to those world states in which the field of sports medicine is regulated neither by a law or by profession. A consequence is that wide circle of physicians and paramedics work in clubs and various medical units without any legal or/and professional control not being adequately educated nor having licence for it. This review is an appeal to the Croatian Medical Chamber and the Ministry of Health to make efforts to promote the education and medical profession in sports medicine.

  9. Integrative medicine is a future medicine

    International Nuclear Information System (INIS)

    Samosyuk, I.Z.; Chukhraev, N.V.

    2001-01-01

    An analysis is given of the modern integrative medicine basis which is the synthesis of: 1. Theology, philosophy and sociology; 2. Physico-mathematical sciences, cybernetics, chemistry and astrology; 3. Medico-biological and clinical experience; 4. Traditional and scientific medicine; 5. Use of traditional and new medical technologies. Problems of 'holistic' medicine which considers Man as a unity of biological, emotional, psychological and social phenomena are exposed. Advantages in combining the drug therapy with modern physiotherapy and physioacupuncture methods seem to be obvious. All visible effects of a disease can de represented in the following forms of changes: information-energy - biochemical - ultrastructure - tissue - clinical diseases. Self-regulation of functional systems has a multilevel structure and needs application of different methods for body recovery. Short-wave irradiation (lasers, magnetotherapy) can be used for energy restoration in functional systems or meridians, and acupuncture plays the role of a 'trigger' which activises the body recovery. Integration of Western and Oriental medicines is the way for achieving the qualitative new level of health protection

  10. Automatic monitoring of vibration welding equipment

    Science.gov (United States)

    Spicer, John Patrick; Chakraborty, Debejyo; Wincek, Michael Anthony; Wang, Hui; Abell, Jeffrey A; Bracey, Jennifer; Cai, Wayne W

    2014-10-14

    A vibration welding system includes vibration welding equipment having a welding horn and anvil, a host device, a check station, and a robot. The robot moves the horn and anvil via an arm to the check station. Sensors, e.g., temperature sensors, are positioned with respect to the welding equipment. Additional sensors are positioned with respect to the check station, including a pressure-sensitive array. The host device, which monitors a condition of the welding equipment, measures signals via the sensors positioned with respect to the welding equipment when the horn is actively forming a weld. The robot moves the horn and anvil to the check station, activates the check station sensors at the check station, and determines a condition of the welding equipment by processing the received signals. Acoustic, force, temperature, displacement, amplitude, and/or attitude/gyroscopic sensors may be used.

  11. Requirements for industrial x-ray equipment

    International Nuclear Information System (INIS)

    1987-01-01

    This safety code is concerned with the protection of all individuals who may be exposed to radiation emitted by X-ray equipment operating at energies up to 1 MeV as used in industrial radiography. This code presents basic radiation safety information for the protection of personnel operating and servicing X-ray equipment and other workers and the general public in the vicinity of areas where X-ray equipment is in operation. It specifies general safety features of design, construction and functioning of X-ray equipment and facilities; describes the responsibilities of the user, operator and maintenance personnel; contains recommendations to ensure that the X-ray equipment is used and maintained in accordance with the ALARA principle; and describes a program of personnel monitoring and radiation safety surveys. ( 6 refs., 5 tabs., 4 figs.)

  12. Equipment qualification research program: program plan

    International Nuclear Information System (INIS)

    Dong, R.G.; Smith, P.D.

    1982-01-01

    The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump

  13. Development of Turbulence-Measuring Equipment

    Science.gov (United States)

    Kovasznay, Leslie S G

    1954-01-01

    Hot wire turbulence-measuring equipment has been developed to meet the more stringent requirements involved in the measurement of fluctuations in flow parameters at supersonic velocities. The higher mean speed necessitates the resolution of higher frequency components than at low speed, and the relatively low turbulence level present at supersonic speed makes necessary an improved noise level for the equipment. The equipment covers the frequency range from 2 to about 70,000 cycles per second. Constant-current operation is employed. Compensation for hot-wire lag is adjusted manually using square-wave testing to indicate proper setting. These and other features make the equipment adaptable to all-purpose turbulence work with improved utility and accuracy over that of older types of equipment. Sample measurements are given to demonstrate the performance.

  14. Oil and gas products and energy equipment

    International Nuclear Information System (INIS)

    1996-01-01

    The planned activities of the Canadian oil and gas products and energy equipment industry for 1996-1997, were presented. The sector is made up of approximately 1500 small and medium sized enterprises. The Canadian oil field manufacturing and servicing industry holds only a small 2.5% share of the world export market, but it is recognized internationally as one of the leading suppliers of advanced petroleum equipment. Their exports include specialized equipment for extracting oil sands, gathering and treatment facilities for sour gas, underbalanced drilling technologies, equipment for wells experiencing declining production rates, top motor drives, winter drilling rigs, and horizontal drilling technologies. They also offer petroleum industry software products. Most exploration and production equipment sold abroad by Canadian firms is manufactured in Canada, but there is an increasing trend toward manufacturing in the country of operation. 2 tabs

  15. Equipment for the handling of thorium materials

    International Nuclear Information System (INIS)

    Heisler, S.W. Jr.; Mihalovich, G.S.

    1988-01-01

    The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

  16. Japan's advanced medicine.

    Science.gov (United States)

    Sho, Ri; Narimatsu, Hiroto; Murakami, Masayasu

    2013-10-01

    Like health care systems in other developed countries, Japan's health care system faces significant challenges due to aging of the population and economic stagnation. Advanced medicine (Senshin Iryou) is a unique system of medical care in Japan offering highly technology-driven medical care that is not covered by public health insurance. Advanced medicine has recently developed and expanded as part of health care reform. Will it work? To answer this question, we briefly trace the historical development of advanced medicine and describe the characteristics and current state of advanced medical care in Japan. We then offer our opinions on the future of advanced medicine with careful consideration of its pros and cons. We believe that developing advanced medicine is an attempt to bring health care reform in line rather than the goal of health care reform.

  17. Evolutionary molecular medicine.

    Science.gov (United States)

    Nesse, Randolph M; Ganten, Detlev; Gregory, T Ryan; Omenn, Gilbert S

    2012-05-01

    Evolution has long provided a foundation for population genetics, but some major advances in evolutionary biology from the twentieth century that provide foundations for evolutionary medicine are only now being applied in molecular medicine. They include the need for both proximate and evolutionary explanations, kin selection, evolutionary models for cooperation, competition between alleles, co-evolution, and new strategies for tracing phylogenies and identifying signals of selection. Recent advances in genomics are transforming evolutionary biology in ways that create even more opportunities for progress at its interfaces with genetics, medicine, and public health. This article reviews 15 evolutionary principles and their applications in molecular medicine in hopes that readers will use them and related principles to speed the development of evolutionary molecular medicine.

  18. Maimonides’ Appreciation for Medicine

    Science.gov (United States)

    Gesundheit, Benjamin

    2011-01-01

    Moses Maimonides, the illustrious medieval rabbi and philosopher, dedicated the last decade of his life primarily to medicine. His strong interest in medicine was an integral component of his religious-philosophical teachings and world view. In this paper various sources from his rabbinic writings are presented that explain Maimonides’ motivation regarding and deep appreciation for medicine: (A) The physician fulfills the basic biblical obligation to return lost objects to their owner, for with his knowledge and experience the physician can restore good health to his sick fellow human being; (B) medicine provides a unique opportunity to practice imitatio dei, as it reflects the religious duty to maintain a healthy life-style; (C) as an important natural science, medicine offers tools to recognize, love, and fear God. These three aspects address man’s relationship and obligation towards his fellow-man, himself and God. Biographical insights supported by additional sources from Maimonides’ writings are discussed. PMID:23908790

  19. Maimonides’ Appreciation for Medicine

    Directory of Open Access Journals (Sweden)

    Benjamin Gesundheit

    2011-01-01

    Full Text Available Moses Maimonides, the illustrious medieval rabbi and philosopher, dedicated the last decade of his life primarily to medicine. His strong interest in medicine was an integral component of his religious-philosophical teachings and world view. In this paper various sources from his rabbinic writings are presented that explain Maimonides’ motivation regarding and deep appreciation for medicine: (A The physician fulfills the basic biblical obligation to return lost objects to their owner, for with his knowledge and experience the physician can restore good health to his sick fellow human being; (B medicine provides a unique opportunity to practice imitatio dei, as it reflects the religious duty to maintain a healthy life-style; (C as an important natural science, medicine offers tools to recognize, love, and fear God. These three aspects address man’s relationship and obligation towards his fellow-man, himself and God. Biographical insights supported by additional sources from Maimonides’ writings are discussed.

  20. Personalized medicine in dentistry

    Directory of Open Access Journals (Sweden)

    Pushpa S Pudakalkatti

    2017-01-01

    Full Text Available Personalized medicine is a branch of medicine that proposes customization of healthcare in which decisions and treatment are tailored according to individual patient needs. The field of personalized medicine relies on genetic information, proteomic information and clinical patient characteristics to individualize treatment. With advances in genetics, proteomics, pharmacogenetics and knowledgeable patient population, the opportunity exists to deliver never before levels of personalized care. Although general dentists may consider personalized medicine a concept for the future, the reality is that its direct application to everyday dentistry is closer than one might think. Use of personalized medicine in dentistry, especially in periodontology is progressing rapidly, and dentist should consider this approach while treating patients. Google and PubMed search was done to select articles for present review. Total 17 articles were used to compile information.